Merge ../linux-2.6 by hand
diff --git a/CREDITS b/CREDITS
index a347520..5b1edf3 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2247,6 +2247,12 @@
S: Syracuse, New York 13206
S: USA
+N: Kyle McMartin
+E: kyle@parisc-linux.org
+D: Linux/PARISC hacker
+D: AD1889 sound driver
+S: Ottawa, Canada
+
N: Dirk Melchers
E: dirk@merlin.nbg.sub.org
D: 8 bit XT hard disk driver for OMTI5520
diff --git a/Documentation/Changes b/Documentation/Changes
index 27232be..783ddc3 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -65,7 +65,7 @@
o nfs-utils 1.0.5 # showmount --version
o procps 3.2.0 # ps --version
o oprofile 0.9 # oprofiled --version
-o udev 058 # udevinfo -V
+o udev 071 # udevinfo -V
Kernel compilation
==================
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index d650ce3..4d9b66d 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -286,7 +286,9 @@
-->
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
-!Edrivers/pci/hotplug.c
+<!-- FIXME: Removed for now since no structured comments in source
+X!Edrivers/pci/hotplug.c
+-->
!Edrivers/pci/probe.c
!Edrivers/pci/rom.c
</sect1>
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 375ae76..d260d92 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -415,6 +415,362 @@
</sect1>
</chapter>
+ <chapter id="libataEH">
+ <title>Error handling</title>
+
+ <para>
+ This chapter describes how errors are handled under libata.
+ Readers are advised to read SCSI EH
+ (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first.
+ </para>
+
+ <sect1><title>Origins of commands</title>
+ <para>
+ In libata, a command is represented with struct ata_queued_cmd
+ or qc. qc's are preallocated during port initialization and
+ repetitively used for command executions. Currently only one
+ qc is allocated per port but yet-to-be-merged NCQ branch
+ allocates one for each tag and maps each qc to NCQ tag 1-to-1.
+ </para>
+ <para>
+ libata commands can originate from two sources - libata itself
+ and SCSI midlayer. libata internal commands are used for
+ initialization and error handling. All normal blk requests
+ and commands for SCSI emulation are passed as SCSI commands
+ through queuecommand callback of SCSI host template.
+ </para>
+ </sect1>
+
+ <sect1><title>How commands are issued</title>
+
+ <variablelist>
+
+ <varlistentry><term>Internal commands</term>
+ <listitem>
+ <para>
+ First, qc is allocated and initialized using
+ ata_qc_new_init(). Although ata_qc_new_init() doesn't
+ implement any wait or retry mechanism when qc is not
+ available, internal commands are currently issued only during
+ initialization and error recovery, so no other command is
+ active and allocation is guaranteed to succeed.
+ </para>
+ <para>
+ Once allocated qc's taskfile is initialized for the command to
+ be executed. qc currently has two mechanisms to notify
+ completion. One is via qc->complete_fn() callback and the
+ other is completion qc->waiting. qc->complete_fn() callback
+ is the asynchronous path used by normal SCSI translated
+ commands and qc->waiting is the synchronous (issuer sleeps in
+ process context) path used by internal commands.
+ </para>
+ <para>
+ Once initialization is complete, host_set lock is acquired
+ and the qc is issued.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>SCSI commands</term>
+ <listitem>
+ <para>
+ All libata drivers use ata_scsi_queuecmd() as
+ hostt->queuecommand callback. scmds can either be simulated
+ or translated. No qc is involved in processing a simulated
+ scmd. The result is computed right away and the scmd is
+ completed.
+ </para>
+ <para>
+ For a translated scmd, ata_qc_new_init() is invoked to
+ allocate a qc and the scmd is translated into the qc. SCSI
+ midlayer's completion notification function pointer is stored
+ into qc->scsidone.
+ </para>
+ <para>
+ qc->complete_fn() callback is used for completion
+ notification. ATA commands use ata_scsi_qc_complete() while
+ ATAPI commands use atapi_qc_complete(). Both functions end up
+ calling qc->scsidone to notify upper layer when the qc is
+ finished. After translation is completed, the qc is issued
+ with ata_qc_issue().
+ </para>
+ <para>
+ Note that SCSI midlayer invokes hostt->queuecommand while
+ holding host_set lock, so all above occur while holding
+ host_set lock.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+ </sect1>
+
+ <sect1><title>How commands are processed</title>
+ <para>
+ Depending on which protocol and which controller are used,
+ commands are processed differently. For the purpose of
+ discussion, a controller which uses taskfile interface and all
+ standard callbacks is assumed.
+ </para>
+ <para>
+ Currently 6 ATA command protocols are used. They can be
+ sorted into the following four categories according to how
+ they are processed.
+ </para>
+
+ <variablelist>
+ <varlistentry><term>ATA NO DATA or DMA</term>
+ <listitem>
+ <para>
+ ATA_PROT_NODATA and ATA_PROT_DMA fall into this category.
+ These types of commands don't require any software
+ intervention once issued. Device will raise interrupt on
+ completion.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ATA PIO</term>
+ <listitem>
+ <para>
+ ATA_PROT_PIO is in this category. libata currently
+ implements PIO with polling. ATA_NIEN bit is set to turn
+ off interrupt and pio_task on ata_wq performs polling and
+ IO.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ATAPI NODATA or DMA</term>
+ <listitem>
+ <para>
+ ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this
+ category. packet_task is used to poll BSY bit after
+ issuing PACKET command. Once BSY is turned off by the
+ device, packet_task transfers CDB and hands off processing
+ to interrupt handler.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ATAPI PIO</term>
+ <listitem>
+ <para>
+ ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set
+ and, as in ATAPI NODATA or DMA, packet_task submits cdb.
+ However, after submitting cdb, further processing (data
+ transfer) is handed off to pio_task.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </sect1>
+
+ <sect1><title>How commands are completed</title>
+ <para>
+ Once issued, all qc's are either completed with
+ ata_qc_complete() or time out. For commands which are handled
+ by interrupts, ata_host_intr() invokes ata_qc_complete(), and,
+ for PIO tasks, pio_task invokes ata_qc_complete(). In error
+ cases, packet_task may also complete commands.
+ </para>
+ <para>
+ ata_qc_complete() does the following.
+ </para>
+
+ <orderedlist>
+
+ <listitem>
+ <para>
+ DMA memory is unmapped.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ ATA_QCFLAG_ACTIVE is clared from qc->flags.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ qc->complete_fn() callback is invoked. If the return value of
+ the callback is not zero. Completion is short circuited and
+ ata_qc_complete() returns.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ __ata_qc_complete() is called, which does
+ <orderedlist>
+
+ <listitem>
+ <para>
+ qc->flags is cleared to zero.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ ap->active_tag and qc->tag are poisoned.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ qc->waiting is claread & completed (in that order).
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ qc is deallocated by clearing appropriate bit in ap->qactive.
+ </para>
+ </listitem>
+
+ </orderedlist>
+ </para>
+ </listitem>
+
+ </orderedlist>
+
+ <para>
+ So, it basically notifies upper layer and deallocates qc. One
+ exception is short-circuit path in #3 which is used by
+ atapi_qc_complete().
+ </para>
+ <para>
+ For all non-ATAPI commands, whether it fails or not, almost
+ the same code path is taken and very little error handling
+ takes place. A qc is completed with success status if it
+ succeeded, with failed status otherwise.
+ </para>
+ <para>
+ However, failed ATAPI commands require more handling as
+ REQUEST SENSE is needed to acquire sense data. If an ATAPI
+ command fails, ata_qc_complete() is invoked with error status,
+ which in turn invokes atapi_qc_complete() via
+ qc->complete_fn() callback.
+ </para>
+ <para>
+ This makes atapi_qc_complete() set scmd->result to
+ SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As
+ the sense data is empty but scmd->result is CHECK CONDITION,
+ SCSI midlayer will invoke EH for the scmd, and returning 1
+ makes ata_qc_complete() to return without deallocating the qc.
+ This leads us to ata_scsi_error() with partially completed qc.
+ </para>
+
+ </sect1>
+
+ <sect1><title>ata_scsi_error()</title>
+ <para>
+ ata_scsi_error() is the current hostt->eh_strategy_handler()
+ for libata. As discussed above, this will be entered in two
+ cases - timeout and ATAPI error completion. This function
+ calls low level libata driver's eng_timeout() callback, the
+ standard callback for which is ata_eng_timeout(). It checks
+ if a qc is active and calls ata_qc_timeout() on the qc if so.
+ Actual error handling occurs in ata_qc_timeout().
+ </para>
+ <para>
+ If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and
+ completes the qc. Note that as we're currently in EH, we
+ cannot call scsi_done. As described in SCSI EH doc, a
+ recovered scmd should be either retried with
+ scsi_queue_insert() or finished with scsi_finish_command().
+ Here, we override qc->scsidone with scsi_finish_command() and
+ calls ata_qc_complete().
+ </para>
+ <para>
+ If EH is invoked due to a failed ATAPI qc, the qc here is
+ completed but not deallocated. The purpose of this
+ half-completion is to use the qc as place holder to make EH
+ code reach this place. This is a bit hackish, but it works.
+ </para>
+ <para>
+ Once control reaches here, the qc is deallocated by invoking
+ __ata_qc_complete() explicitly. Then, internal qc for REQUEST
+ SENSE is issued. Once sense data is acquired, scmd is
+ finished by directly invoking scsi_finish_command() on the
+ scmd. Note that as we already have completed and deallocated
+ the qc which was associated with the scmd, we don't need
+ to/cannot call ata_qc_complete() again.
+ </para>
+
+ </sect1>
+
+ <sect1><title>Problems with the current EH</title>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ Error representation is too crude. Currently any and all
+ error conditions are represented with ATA STATUS and ERROR
+ registers. Errors which aren't ATA device errors are treated
+ as ATA device errors by setting ATA_ERR bit. Better error
+ descriptor which can properly represent ATA and other
+ errors/exceptions is needed.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ When handling timeouts, no action is taken to make device
+ forget about the timed out command and ready for new commands.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ EH handling via ata_scsi_error() is not properly protected
+ from usual command processing. On EH entrance, the device is
+ not in quiescent state. Timed out commands may succeed or
+ fail any time. pio_task and atapi_task may still be running.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Too weak error recovery. Devices / controllers causing HSM
+ mismatch errors and other errors quite often require reset to
+ return to known state. Also, advanced error handling is
+ necessary to support features like NCQ and hotplug.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ ATA errors are directly handled in the interrupt handler and
+ PIO errors in pio_task. This is problematic for advanced
+ error handling for the following reasons.
+ </para>
+ <para>
+ First, advanced error handling often requires context and
+ internal qc execution.
+ </para>
+ <para>
+ Second, even a simple failure (say, CRC error) needs
+ information gathering and could trigger complex error handling
+ (say, resetting & reconfiguring). Having multiple code
+ paths to gather information, enter EH and trigger actions
+ makes life painful.
+ </para>
+ <para>
+ Third, scattered EH code makes implementing low level drivers
+ difficult. Low level drivers override libata callbacks. If
+ EH is scattered over several places, each affected callbacks
+ should perform its part of error handling. This can be error
+ prone and painful.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+ </sect1>
+ </chapter>
+
<chapter id="libataExt">
<title>libata Library</title>
!Edrivers/scsi/libata-core.c
@@ -431,6 +787,722 @@
!Idrivers/scsi/libata-scsi.c
</chapter>
+ <chapter id="ataExceptions">
+ <title>ATA errors & exceptions</title>
+
+ <para>
+ This chapter tries to identify what error/exception conditions exist
+ for ATA/ATAPI devices and describe how they should be handled in
+ implementation-neutral way.
+ </para>
+
+ <para>
+ The term 'error' is used to describe conditions where either an
+ explicit error condition is reported from device or a command has
+ timed out.
+ </para>
+
+ <para>
+ The term 'exception' is either used to describe exceptional
+ conditions which are not errors (say, power or hotplug events), or
+ to describe both errors and non-error exceptional conditions. Where
+ explicit distinction between error and exception is necessary, the
+ term 'non-error exception' is used.
+ </para>
+
+ <sect1 id="excat">
+ <title>Exception categories</title>
+ <para>
+ Exceptions are described primarily with respect to legacy
+ taskfile + bus master IDE interface. If a controller provides
+ other better mechanism for error reporting, mapping those into
+ categories described below shouldn't be difficult.
+ </para>
+
+ <para>
+ In the following sections, two recovery actions - reset and
+ reconfiguring transport - are mentioned. These are described
+ further in <xref linkend="exrec"/>.
+ </para>
+
+ <sect2 id="excatHSMviolation">
+ <title>HSM violation</title>
+ <para>
+ This error is indicated when STATUS value doesn't match HSM
+ requirement during issuing or excution any ATA/ATAPI command.
+ </para>
+
+ <itemizedlist>
+ <title>Examples</title>
+
+ <listitem>
+ <para>
+ ATA_STATUS doesn't contain !BSY && DRDY && !DRQ while trying
+ to issue a command.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ !BSY && !DRQ during PIO data transfer.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ DRQ on command completion.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ !BSY && ERR after CDB tranfer starts but before the
+ last byte of CDB is transferred. ATA/ATAPI standard states
+ that "The device shall not terminate the PACKET command
+ with an error before the last byte of the command packet has
+ been written" in the error outputs description of PACKET
+ command and the state diagram doesn't include such
+ transitions.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ In these cases, HSM is violated and not much information
+ regarding the error can be acquired from STATUS or ERROR
+ register. IOW, this error can be anything - driver bug,
+ faulty device, controller and/or cable.
+ </para>
+
+ <para>
+ As HSM is violated, reset is necessary to restore known state.
+ Reconfiguring transport for lower speed might be helpful too
+ as transmission errors sometimes cause this kind of errors.
+ </para>
+ </sect2>
+
+ <sect2 id="excatDevErr">
+ <title>ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)</title>
+
+ <para>
+ These are errors detected and reported by ATA/ATAPI devices
+ indicating device problems. For this type of errors, STATUS
+ and ERROR register values are valid and describe error
+ condition. Note that some of ATA bus errors are detected by
+ ATA/ATAPI devices and reported using the same mechanism as
+ device errors. Those cases are described later in this
+ section.
+ </para>
+
+ <para>
+ For ATA commands, this type of errors are indicated by !BSY
+ && ERR during command execution and on completion.
+ </para>
+
+ <para>For ATAPI commands,</para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ !BSY && ERR && ABRT right after issuing PACKET
+ indicates that PACKET command is not supported and falls in
+ this category.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ !BSY && ERR(==CHK) && !ABRT after the last
+ byte of CDB is transferred indicates CHECK CONDITION and
+ doesn't fall in this category.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ !BSY && ERR(==CHK) && ABRT after the last byte
+ of CDB is transferred *probably* indicates CHECK CONDITION and
+ doesn't fall in this category.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ Of errors detected as above, the followings are not ATA/ATAPI
+ device errors but ATA bus errors and should be handled
+ according to <xref linkend="excatATAbusErr"/>.
+ </para>
+
+ <variablelist>
+
+ <varlistentry>
+ <term>CRC error during data transfer</term>
+ <listitem>
+ <para>
+ This is indicated by ICRC bit in the ERROR register and
+ means that corruption occurred during data transfer. Upto
+ ATA/ATAPI-7, the standard specifies that this bit is only
+ applicable to UDMA transfers but ATA/ATAPI-8 draft revision
+ 1f says that the bit may be applicable to multiword DMA and
+ PIO.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>ABRT error during data transfer or on completion</term>
+ <listitem>
+ <para>
+ Upto ATA/ATAPI-7, the standard specifies that ABRT could be
+ set on ICRC errors and on cases where a device is not able
+ to complete a command. Combined with the fact that MWDMA
+ and PIO transfer errors aren't allowed to use ICRC bit upto
+ ATA/ATAPI-7, it seems to imply that ABRT bit alone could
+ indicate tranfer errors.
+ </para>
+ <para>
+ However, ATA/ATAPI-8 draft revision 1f removes the part
+ that ICRC errors can turn on ABRT. So, this is kind of
+ gray area. Some heuristics are needed here.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para>
+ ATA/ATAPI device errors can be further categorized as follows.
+ </para>
+
+ <variablelist>
+
+ <varlistentry>
+ <term>Media errors</term>
+ <listitem>
+ <para>
+ This is indicated by UNC bit in the ERROR register. ATA
+ devices reports UNC error only after certain number of
+ retries cannot recover the data, so there's nothing much
+ else to do other than notifying upper layer.
+ </para>
+ <para>
+ READ and WRITE commands report CHS or LBA of the first
+ failed sector but ATA/ATAPI standard specifies that the
+ amount of transferred data on error completion is
+ indeterminate, so we cannot assume that sectors preceding
+ the failed sector have been transferred and thus cannot
+ complete those sectors successfully as SCSI does.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Media changed / media change requested error</term>
+ <listitem>
+ <para>
+ <<TODO: fill here>>
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>Address error</term>
+ <listitem>
+ <para>
+ This is indicated by IDNF bit in the ERROR register.
+ Report to upper layer.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>Other errors</term>
+ <listitem>
+ <para>
+ This can be invalid command or parameter indicated by ABRT
+ ERROR bit or some other error condition. Note that ABRT
+ bit can indicate a lot of things including ICRC and Address
+ errors. Heuristics needed.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para>
+ Depending on commands, not all STATUS/ERROR bits are
+ applicable. These non-applicable bits are marked with
+ "na" in the output descriptions but upto ATA/ATAPI-7
+ no definition of "na" can be found. However,
+ ATA/ATAPI-8 draft revision 1f describes "N/A" as
+ follows.
+ </para>
+
+ <blockquote>
+ <variablelist>
+ <varlistentry><term>3.2.3.3a N/A</term>
+ <listitem>
+ <para>
+ A keyword the indicates a field has no defined value in
+ this standard and should not be checked by the host or
+ device. N/A fields should be cleared to zero.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </blockquote>
+
+ <para>
+ So, it seems reasonable to assume that "na" bits are
+ cleared to zero by devices and thus need no explicit masking.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatATAPIcc">
+ <title>ATAPI device CHECK CONDITION</title>
+
+ <para>
+ ATAPI device CHECK CONDITION error is indicated by set CHK bit
+ (ERR bit) in the STATUS register after the last byte of CDB is
+ transferred for a PACKET command. For this kind of errors,
+ sense data should be acquired to gather information regarding
+ the errors. REQUEST SENSE packet command should be used to
+ acquire sense data.
+ </para>
+
+ <para>
+ Once sense data is acquired, this type of errors can be
+ handled similary to other SCSI errors. Note that sense data
+ may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
+ && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such
+ cases, the error should be considered as an ATA bus error and
+ handled according to <xref linkend="excatATAbusErr"/>.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatNCQerr">
+ <title>ATA device error (NCQ)</title>
+
+ <para>
+ NCQ command error is indicated by cleared BSY and set ERR bit
+ during NCQ command phase (one or more NCQ commands
+ outstanding). Although STATUS and ERROR registers will
+ contain valid values describing the error, READ LOG EXT is
+ required to clear the error condition, determine which command
+ has failed and acquire more information.
+ </para>
+
+ <para>
+ READ LOG EXT Log Page 10h reports which tag has failed and
+ taskfile register values describing the error. With this
+ information the failed command can be handled as a normal ATA
+ command error as in <xref linkend="excatDevErr"/> and all
+ other in-flight commands must be retried. Note that this
+ retry should not be counted - it's likely that commands
+ retried this way would have completed normally if it were not
+ for the failed command.
+ </para>
+
+ <para>
+ Note that ATA bus errors can be reported as ATA device NCQ
+ errors. This should be handled as described in <xref
+ linkend="excatATAbusErr"/>.
+ </para>
+
+ <para>
+ If READ LOG EXT Log Page 10h fails or reports NQ, we're
+ thoroughly screwed. This condition should be treated
+ according to <xref linkend="excatHSMviolation"/>.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatATAbusErr">
+ <title>ATA bus error</title>
+
+ <para>
+ ATA bus error means that data corruption occurred during
+ transmission over ATA bus (SATA or PATA). This type of errors
+ can be indicated by
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ ICRC or ABRT error as described in <xref linkend="excatDevErr"/>.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Controller-specific error completion with error information
+ indicating transmission error.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ On some controllers, command timeout. In this case, there may
+ be a mechanism to determine that the timeout is due to
+ transmission error.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Unknown/random errors, timeouts and all sorts of weirdities.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ As described above, transmission errors can cause wide variety
+ of symptoms ranging from device ICRC error to random device
+ lockup, and, for many cases, there is no way to tell if an
+ error condition is due to transmission error or not;
+ therefore, it's necessary to employ some kind of heuristic
+ when dealing with errors and timeouts. For example,
+ encountering repetitive ABRT errors for known supported
+ command is likely to indicate ATA bus error.
+ </para>
+
+ <para>
+ Once it's determined that ATA bus errors have possibly
+ occurred, lowering ATA bus transmission speed is one of
+ actions which may alleviate the problem. See <xref
+ linkend="exrecReconf"/> for more information.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatPCIbusErr">
+ <title>PCI bus error</title>
+
+ <para>
+ Data corruption or other failures during transmission over PCI
+ (or other system bus). For standard BMDMA, this is indicated
+ by Error bit in the BMDMA Status register. This type of
+ errors must be logged as it indicates something is very wrong
+ with the system. Resetting host controller is recommended.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatLateCompletion">
+ <title>Late completion</title>
+
+ <para>
+ This occurs when timeout occurs and the timeout handler finds
+ out that the timed out command has completed successfully or
+ with error. This is usually caused by lost interrupts. This
+ type of errors must be logged. Resetting host controller is
+ recommended.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatUnknown">
+ <title>Unknown error (timeout)</title>
+
+ <para>
+ This is when timeout occurs and the command is still
+ processing or the host and device are in unknown state. When
+ this occurs, HSM could be in any valid or invalid state. To
+ bring the device to known state and make it forget about the
+ timed out command, resetting is necessary. The timed out
+ command may be retried.
+ </para>
+
+ <para>
+ Timeouts can also be caused by transmission errors. Refer to
+ <xref linkend="excatATAbusErr"/> for more details.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatHoplugPM">
+ <title>Hotplug and power management exceptions</title>
+
+ <para>
+ <<TODO: fill here>>
+ </para>
+
+ </sect2>
+
+ </sect1>
+
+ <sect1 id="exrec">
+ <title>EH recovery actions</title>
+
+ <para>
+ This section discusses several important recovery actions.
+ </para>
+
+ <sect2 id="exrecClr">
+ <title>Clearing error condition</title>
+
+ <para>
+ Many controllers require its error registers to be cleared by
+ error handler. Different controllers may have different
+ requirements.
+ </para>
+
+ <para>
+ For SATA, it's strongly recommended to clear at least SError
+ register during error handling.
+ </para>
+ </sect2>
+
+ <sect2 id="exrecRst">
+ <title>Reset</title>
+
+ <para>
+ During EH, resetting is necessary in the following cases.
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ HSM is in unknown or invalid state
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ HBA is in unknown or invalid state
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ EH needs to make HBA/device forget about in-flight commands
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ HBA/device behaves weirdly
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ Resetting during EH might be a good idea regardless of error
+ condition to improve EH robustness. Whether to reset both or
+ either one of HBA and device depends on situation but the
+ following scheme is recommended.
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ When it's known that HBA is in ready state but ATA/ATAPI
+ device in in unknown state, reset only device.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ If HBA is in unknown state, reset both HBA and device.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ HBA resetting is implementation specific. For a controller
+ complying to taskfile/BMDMA PCI IDE, stopping active DMA
+ transaction may be sufficient iff BMDMA state is the only HBA
+ context. But even mostly taskfile/BMDMA PCI IDE complying
+ controllers may have implementation specific requirements and
+ mechanism to reset themselves. This must be addressed by
+ specific drivers.
+ </para>
+
+ <para>
+ OTOH, ATA/ATAPI standard describes in detail ways to reset
+ ATA/ATAPI devices.
+ </para>
+
+ <variablelist>
+
+ <varlistentry><term>PATA hardware reset</term>
+ <listitem>
+ <para>
+ This is hardware initiated device reset signalled with
+ asserted PATA RESET- signal. There is no standard way to
+ initiate hardware reset from software although some
+ hardware provides registers that allow driver to directly
+ tweak the RESET- signal.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>Software reset</term>
+ <listitem>
+ <para>
+ This is achieved by turning CONTROL SRST bit on for at
+ least 5us. Both PATA and SATA support it but, in case of
+ SATA, this may require controller-specific support as the
+ second Register FIS to clear SRST should be transmitted
+ while BSY bit is still set. Note that on PATA, this resets
+ both master and slave devices on a channel.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>EXECUTE DEVICE DIAGNOSTIC command</term>
+ <listitem>
+ <para>
+ Although ATA/ATAPI standard doesn't describe exactly, EDD
+ implies some level of resetting, possibly similar level
+ with software reset. Host-side EDD protocol can be handled
+ with normal command processing and most SATA controllers
+ should be able to handle EDD's just like other commands.
+ As in software reset, EDD affects both devices on a PATA
+ bus.
+ </para>
+ <para>
+ Although EDD does reset devices, this doesn't suit error
+ handling as EDD cannot be issued while BSY is set and it's
+ unclear how it will act when device is in unknown/weird
+ state.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ATAPI DEVICE RESET command</term>
+ <listitem>
+ <para>
+ This is very similar to software reset except that reset
+ can be restricted to the selected device without affecting
+ the other device sharing the cable.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>SATA phy reset</term>
+ <listitem>
+ <para>
+ This is the preferred way of resetting a SATA device. In
+ effect, it's identical to PATA hardware reset. Note that
+ this can be done with the standard SCR Control register.
+ As such, it's usually easier to implement than software
+ reset.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para>
+ One more thing to consider when resetting devices is that
+ resetting clears certain configuration parameters and they
+ need to be set to their previous or newly adjusted values
+ after reset.
+ </para>
+
+ <para>
+ Parameters affected are.
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used)
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Parameters set with SET FEATURES including transfer mode setting
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Block count set with SET MULTIPLE MODE
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Other parameters (SET MAX, MEDIA LOCK...)
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ ATA/ATAPI standard specifies that some parameters must be
+ maintained across hardware or software reset, but doesn't
+ strictly specify all of them. Always reconfiguring needed
+ parameters after reset is required for robustness. Note that
+ this also applies when resuming from deep sleep (power-off).
+ </para>
+
+ <para>
+ Also, ATA/ATAPI standard requires that IDENTIFY DEVICE /
+ IDENTIFY PACKET DEVICE is issued after any configuration
+ parameter is updated or a hardware reset and the result used
+ for further operation. OS driver is required to implement
+ revalidation mechanism to support this.
+ </para>
+
+ </sect2>
+
+ <sect2 id="exrecReconf">
+ <title>Reconfigure transport</title>
+
+ <para>
+ For both PATA and SATA, a lot of corners are cut for cheap
+ connectors, cables or controllers and it's quite common to see
+ high transmission error rate. This can be mitigated by
+ lowering transmission speed.
+ </para>
+
+ <para>
+ The following is a possible scheme Jeff Garzik suggested.
+ </para>
+
+ <blockquote>
+ <para>
+ If more than $N (3?) transmission errors happen in 15 minutes,
+ </para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ if SATA, decrease SATA PHY speed. if speed cannot be decreased,
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ decrease UDMA xfer speed. if at UDMA0, switch to PIO4,
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ decrease PIO xfer speed. if at PIO3, complain, but continue
+ </para>
+ </listitem>
+ </itemizedlist>
+ </blockquote>
+
+ </sect2>
+
+ </sect1>
+
+ </chapter>
+
<chapter id="PiixInt">
<title>ata_piix Internals</title>
!Idrivers/scsi/ata_piix.c
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
index 705c442..15ce0f2 100644
--- a/Documentation/DocBook/usb.tmpl
+++ b/Documentation/DocBook/usb.tmpl
@@ -291,7 +291,7 @@
!Edrivers/usb/core/hcd.c
!Edrivers/usb/core/hcd-pci.c
-!Edrivers/usb/core/buffer.c
+!Idrivers/usb/core/buffer.c
</chapter>
<chapter>
diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl
index 51f3bfb..008a341 100644
--- a/Documentation/DocBook/writing_usb_driver.tmpl
+++ b/Documentation/DocBook/writing_usb_driver.tmpl
@@ -345,8 +345,7 @@
<programlisting>
static inline void skel_delete (struct usb_skel *dev)
{
- if (dev->bulk_in_buffer != NULL)
- kfree (dev->bulk_in_buffer);
+ kfree (dev->bulk_in_buffer);
if (dev->bulk_out_buffer != NULL)
usb_buffer_free (dev->udev, dev->bulk_out_size,
dev->bulk_out_buffer,
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
new file mode 100644
index 0000000..e4c3815
--- /dev/null
+++ b/Documentation/RCU/torture.txt
@@ -0,0 +1,122 @@
+RCU Torture Test Operation
+
+
+CONFIG_RCU_TORTURE_TEST
+
+The CONFIG_RCU_TORTURE_TEST config option is available for all RCU
+implementations. It creates an rcutorture kernel module that can
+be loaded to run a torture test. The test periodically outputs
+status messages via printk(), which can be examined via the dmesg
+command (perhaps grepping for "rcutorture"). The test is started
+when the module is loaded, and stops when the module is unloaded.
+
+However, actually setting this config option to "y" results in the system
+running the test immediately upon boot, and ending only when the system
+is taken down. Normally, one will instead want to build the system
+with CONFIG_RCU_TORTURE_TEST=m and to use modprobe and rmmod to control
+the test, perhaps using a script similar to the one shown at the end of
+this document. Note that you will need CONFIG_MODULE_UNLOAD in order
+to be able to end the test.
+
+
+MODULE PARAMETERS
+
+This module has the following parameters:
+
+nreaders This is the number of RCU reading threads supported.
+ The default is twice the number of CPUs. Why twice?
+ To properly exercise RCU implementations with preemptible
+ read-side critical sections.
+
+stat_interval The number of seconds between output of torture
+ statistics (via printk()). Regardless of the interval,
+ statistics are printed when the module is unloaded.
+ Setting the interval to zero causes the statistics to
+ be printed -only- when the module is unloaded, and this
+ is the default.
+
+verbose Enable debug printk()s. Default is disabled.
+
+
+OUTPUT
+
+The statistics output is as follows:
+
+ rcutorture: --- Start of test: nreaders=16 stat_interval=0 verbose=0
+ rcutorture: rtc: 0000000000000000 ver: 1916 tfle: 0 rta: 1916 rtaf: 0 rtf: 1915
+ rcutorture: Reader Pipe: 1466408 9747 0 0 0 0 0 0 0 0 0
+ rcutorture: Reader Batch: 1464477 11678 0 0 0 0 0 0 0 0
+ rcutorture: Free-Block Circulation: 1915 1915 1915 1915 1915 1915 1915 1915 1915 1915 0
+ rcutorture: --- End of test
+
+The command "dmesg | grep rcutorture:" will extract this information on
+most systems. On more esoteric configurations, it may be necessary to
+use other commands to access the output of the printk()s used by
+the RCU torture test. The printk()s use KERN_ALERT, so they should
+be evident. ;-)
+
+The entries are as follows:
+
+o "ggp": The number of counter flips (or batches) since boot.
+
+o "rtc": The hexadecimal address of the structure currently visible
+ to readers.
+
+o "ver": The number of times since boot that the rcutw writer task
+ has changed the structure visible to readers.
+
+o "tfle": If non-zero, indicates that the "torture freelist"
+ containing structure to be placed into the "rtc" area is empty.
+ This condition is important, since it can fool you into thinking
+ that RCU is working when it is not. :-/
+
+o "rta": Number of structures allocated from the torture freelist.
+
+o "rtaf": Number of allocations from the torture freelist that have
+ failed due to the list being empty.
+
+o "rtf": Number of frees into the torture freelist.
+
+o "Reader Pipe": Histogram of "ages" of structures seen by readers.
+ If any entries past the first two are non-zero, RCU is broken.
+ And rcutorture prints the error flag string "!!!" to make sure
+ you notice. The age of a newly allocated structure is zero,
+ it becomes one when removed from reader visibility, and is
+ incremented once per grace period subsequently -- and is freed
+ after passing through (RCU_TORTURE_PIPE_LEN-2) grace periods.
+
+ The output displayed above was taken from a correctly working
+ RCU. If you want to see what it looks like when broken, break
+ it yourself. ;-)
+
+o "Reader Batch": Another histogram of "ages" of structures seen
+ by readers, but in terms of counter flips (or batches) rather
+ than in terms of grace periods. The legal number of non-zero
+ entries is again two. The reason for this separate view is
+ that it is easier to get the third entry to show up in the
+ "Reader Batch" list than in the "Reader Pipe" list.
+
+o "Free-Block Circulation": Shows the number of torture structures
+ that have reached a given point in the pipeline. The first element
+ should closely correspond to the number of structures allocated,
+ the second to the number that have been removed from reader view,
+ and all but the last remaining to the corresponding number of
+ passes through a grace period. The last entry should be zero,
+ as it is only incremented if a torture structure's counter
+ somehow gets incremented farther than it should.
+
+
+USAGE
+
+The following script may be used to torture RCU:
+
+ #!/bin/sh
+
+ modprobe rcutorture
+ sleep 100
+ rmmod rcutorture
+ dmesg | grep rcutorture:
+
+The output can be manually inspected for the error flag of "!!!".
+One could of course create a more elaborate script that automatically
+checked for such errors.
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 6dd274d..2d65c21 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -906,9 +906,20 @@
4. The I/O scheduler
-I/O schedulers are now per queue. They should be runtime switchable and modular
-but aren't yet. Jens has most bits to do this, but the sysfs implementation is
-missing.
+I/O scheduler, a.k.a. elevator, is implemented in two layers. Generic dispatch
+queue and specific I/O schedulers. Unless stated otherwise, elevator is used
+to refer to both parts and I/O scheduler to specific I/O schedulers.
+
+Block layer implements generic dispatch queue in ll_rw_blk.c and elevator.c.
+The generic dispatch queue is responsible for properly ordering barrier
+requests, requeueing, handling non-fs requests and all other subtleties.
+
+Specific I/O schedulers are responsible for ordering normal filesystem
+requests. They can also choose to delay certain requests to improve
+throughput or whatever purpose. As the plural form indicates, there are
+multiple I/O schedulers. They can be built as modules but at least one should
+be built inside the kernel. Each queue can choose different one and can also
+change to another one dynamically.
A block layer call to the i/o scheduler follows the convention elv_xxx(). This
calls elevator_xxx_fn in the elevator switch (drivers/block/elevator.c). Oh,
@@ -921,44 +932,36 @@
The functions an elevator may implement are: (* are mandatory)
elevator_merge_fn called to query requests for merge with a bio
-elevator_merge_req_fn " " " with another request
+elevator_merge_req_fn called when two requests get merged. the one
+ which gets merged into the other one will be
+ never seen by I/O scheduler again. IOW, after
+ being merged, the request is gone.
elevator_merged_fn called when a request in the scheduler has been
involved in a merge. It is used in the deadline
scheduler for example, to reposition the request
if its sorting order has changed.
-*elevator_next_req_fn returns the next scheduled request, or NULL
- if there are none (or none are ready).
+elevator_dispatch_fn fills the dispatch queue with ready requests.
+ I/O schedulers are free to postpone requests by
+ not filling the dispatch queue unless @force
+ is non-zero. Once dispatched, I/O schedulers
+ are not allowed to manipulate the requests -
+ they belong to generic dispatch queue.
-*elevator_add_req_fn called to add a new request into the scheduler
+elevator_add_req_fn called to add a new request into the scheduler
elevator_queue_empty_fn returns true if the merge queue is empty.
Drivers shouldn't use this, but rather check
if elv_next_request is NULL (without losing the
request if one exists!)
-elevator_remove_req_fn This is called when a driver claims ownership of
- the target request - it now belongs to the
- driver. It must not be modified or merged.
- Drivers must not lose the request! A subsequent
- call of elevator_next_req_fn must return the
- _next_ request.
-
-elevator_requeue_req_fn called to add a request to the scheduler. This
- is used when the request has alrnadebeen
- returned by elv_next_request, but hasn't
- completed. If this is not implemented then
- elevator_add_req_fn is called instead.
-
elevator_former_req_fn
elevator_latter_req_fn These return the request before or after the
one specified in disk sort order. Used by the
block layer to find merge possibilities.
-elevator_completed_req_fn called when a request is completed. This might
- come about due to being merged with another or
- when the device completes the request.
+elevator_completed_req_fn called when a request is completed.
elevator_may_queue_fn returns true if the scheduler wants to allow the
current context to queue a new request even if
@@ -967,13 +970,33 @@
elevator_set_req_fn
elevator_put_req_fn Must be used to allocate and free any elevator
- specific storate for a request.
+ specific storage for a request.
+
+elevator_activate_req_fn Called when device driver first sees a request.
+ I/O schedulers can use this callback to
+ determine when actual execution of a request
+ starts.
+elevator_deactivate_req_fn Called when device driver decides to delay
+ a request by requeueing it.
elevator_init_fn
elevator_exit_fn Allocate and free any elevator specific storage
for a queue.
-4.2 I/O scheduler implementation
+4.2 Request flows seen by I/O schedulers
+All requests seens by I/O schedulers strictly follow one of the following three
+flows.
+
+ set_req_fn ->
+
+ i. add_req_fn -> (merged_fn ->)* -> dispatch_fn -> activate_req_fn ->
+ (deactivate_req_fn -> activate_req_fn ->)* -> completed_req_fn
+ ii. add_req_fn -> (merged_fn ->)* -> merge_req_fn
+ iii. [none]
+
+ -> put_req_fn
+
+4.3 I/O scheduler implementation
The generic i/o scheduler algorithm attempts to sort/merge/batch requests for
optimal disk scan and request servicing performance (based on generic
principles and device capabilities), optimized for:
@@ -993,18 +1016,7 @@
This arrangement is not a generic block layer characteristic however, so
elevators may implement queues as they please.
-ii. Last merge hint
-The last merge hint is part of the generic queue layer. I/O schedulers must do
-some management on it. For the most part, the most important thing is to make
-sure q->last_merge is cleared (set to NULL) when the request on it is no longer
-a candidate for merging (for example if it has been sent to the driver).
-
-The last merge performed is cached as a hint for the subsequent request. If
-sequential data is being submitted, the hint is used to perform merges without
-any scanning. This is not sufficient when there are multiple processes doing
-I/O though, so a "merge hash" is used by some schedulers.
-
-iii. Merge hash
+ii. Merge hash
AS and deadline use a hash table indexed by the last sector of a request. This
enables merging code to quickly look up "back merge" candidates, even when
multiple I/O streams are being performed at once on one disk.
@@ -1013,29 +1025,8 @@
are far less common than "back merges" due to the nature of most I/O patterns.
Front merges are handled by the binary trees in AS and deadline schedulers.
-iv. Handling barrier cases
-A request with flags REQ_HARDBARRIER or REQ_SOFTBARRIER must not be ordered
-around. That is, they must be processed after all older requests, and before
-any newer ones. This includes merges!
-
-In AS and deadline schedulers, barriers have the effect of flushing the reorder
-queue. The performance cost of this will vary from nothing to a lot depending
-on i/o patterns and device characteristics. Obviously they won't improve
-performance, so their use should be kept to a minimum.
-
-v. Handling insertion position directives
-A request may be inserted with a position directive. The directives are one of
-ELEVATOR_INSERT_BACK, ELEVATOR_INSERT_FRONT, ELEVATOR_INSERT_SORT.
-
-ELEVATOR_INSERT_SORT is a general directive for non-barrier requests.
-ELEVATOR_INSERT_BACK is used to insert a barrier to the back of the queue.
-ELEVATOR_INSERT_FRONT is used to insert a barrier to the front of the queue, and
-overrides the ordering requested by any previous barriers. In practice this is
-harmless and required, because it is used for SCSI requeueing. This does not
-require flushing the reorder queue, so does not impose a performance penalty.
-
-vi. Plugging the queue to batch requests in anticipation of opportunities for
- merge/sort optimizations
+iii. Plugging the queue to batch requests in anticipation of opportunities for
+ merge/sort optimizations
This is just the same as in 2.4 so far, though per-device unplugging
support is anticipated for 2.5. Also with a priority-based i/o scheduler,
@@ -1069,7 +1060,7 @@
blk_kick_queue() to unplug a specific queue (right away ?)
or optionally, all queues, is in the plan.
-4.3 I/O contexts
+4.4 I/O contexts
I/O contexts provide a dynamically allocated per process data area. They may
be used in I/O schedulers, and in the block layer (could be used for IO statis,
priorities for example). See *io_context in drivers/block/ll_rw_blk.c, and
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index e132fb1..7eb715e 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -49,9 +49,6 @@
page table operations such as what happens during
fork, and exec.
- Platform developers note that generic code will always
- invoke this interface without mm->page_table_lock held.
-
3) void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
@@ -72,9 +69,6 @@
call flush_tlb_page (see below) for each entry which may be
modified.
- Platform developers note that generic code will always
- invoke this interface with mm->page_table_lock held.
-
4) void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
This time we need to remove the PAGE_SIZE sized translation
@@ -93,9 +87,6 @@
This is used primarily during fault processing.
- Platform developers note that generic code will always
- invoke this interface with mm->page_table_lock held.
-
5) void flush_tlb_pgtables(struct mm_struct *mm,
unsigned long start, unsigned long end)
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index d17b7d2..a09a8eb 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -94,7 +94,7 @@
But larger systems, which benefit more from careful processor and
memory placement to reduce memory access times and contention,
and which typically represent a larger investment for the customer,
-can benefit from explictly placing jobs on properly sized subsets of
+can benefit from explicitly placing jobs on properly sized subsets of
the system.
This can be especially valuable on:
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index fabaca1..59806c9 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -14,8 +14,8 @@
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
- int (*suspend) (struct device * dev, pm_message_t state, u32 level);
- int (*resume) (struct device * dev, u32 level);
+ int (*suspend) (struct device * dev, pm_message_t state);
+ int (*resume) (struct device * dev);
};
@@ -194,69 +194,13 @@
If the device is still present, it should quiesce the device and place
it into a supported low-power state.
- int (*suspend) (struct device * dev, pm_message_t state, u32 level);
+ int (*suspend) (struct device * dev, pm_message_t state);
-suspend is called to put the device in a low power state. There are
-several stages to successfully suspending a device, which is denoted in
-the @level parameter. Breaking the suspend transition into several
-stages affords the platform flexibility in performing device power
-management based on the requirements of the system and the
-user-defined policy.
+suspend is called to put the device in a low power state.
-SUSPEND_NOTIFY notifies the device that a suspend transition is about
-to happen. This happens on system power state transitions to verify
-that all devices can successfully suspend.
+ int (*resume) (struct device * dev);
-A driver may choose to fail on this call, which should cause the
-entire suspend transition to fail. A driver should fail only if it
-knows that the device will not be able to be resumed properly when the
-system wakes up again. It could also fail if it somehow determines it
-is in the middle of an operation too important to stop.
-
-SUSPEND_DISABLE tells the device to stop I/O transactions. When it
-stops transactions, or what it should do with unfinished transactions
-is a policy of the driver. After this call, the driver should not
-accept any other I/O requests.
-
-SUSPEND_SAVE_STATE tells the device to save the context of the
-hardware. This includes any bus-specific hardware state and
-device-specific hardware state. A pointer to this saved state can be
-stored in the device's saved_state field.
-
-SUSPEND_POWER_DOWN tells the driver to place the device in the low
-power state requested.
-
-Whether suspend is called with a given level is a policy of the
-platform. Some levels may be omitted; drivers must not assume the
-reception of any level. However, all levels must be called in the
-order above; i.e. notification will always come before disabling;
-disabling the device will come before suspending the device.
-
-All calls are made with interrupts enabled, except for the
-SUSPEND_POWER_DOWN level.
-
- int (*resume) (struct device * dev, u32 level);
-
-Resume is used to bring a device back from a low power state. Like the
-suspend transition, it happens in several stages.
-
-RESUME_POWER_ON tells the driver to set the power state to the state
-before the suspend call (The device could have already been in a low
-power state before the suspend call to put in a lower power state).
-
-RESUME_RESTORE_STATE tells the driver to restore the state saved by
-the SUSPEND_SAVE_STATE suspend call.
-
-RESUME_ENABLE tells the driver to start accepting I/O transactions
-again. Depending on driver policy, the device may already have pending
-I/O requests.
-
-RESUME_POWER_ON is called with interrupts disabled. The other resume
-levels are called with interrupts enabled.
-
-As with the various suspend stages, the driver must not assume that
-any other resume calls have been or will be made. Each call should be
-self-contained and not dependent on any external state.
+Resume is used to bring a device back from a low power state.
Attributes
diff --git a/Documentation/driver-model/porting.txt b/Documentation/driver-model/porting.txt
index ff2fef2..98b233c 100644
--- a/Documentation/driver-model/porting.txt
+++ b/Documentation/driver-model/porting.txt
@@ -350,7 +350,7 @@
over. bus->match() is called for each device that is not already
claimed by a driver.
-When a device is successfully bound to a device, device->driver is
+When a device is successfully bound to a driver, device->driver is
set, the device is added to a per-driver list of devices, and a
symlink is created in the driver's sysfs directory that points to the
device's physical directory:
diff --git a/Documentation/firmware_class/firmware_sample_driver.c b/Documentation/firmware_class/firmware_sample_driver.c
index 4bef8c2..d3ad2c2 100644
--- a/Documentation/firmware_class/firmware_sample_driver.c
+++ b/Documentation/firmware_class/firmware_sample_driver.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/string.h>
#include "linux/firmware.h"
diff --git a/Documentation/firmware_class/firmware_sample_firmware_class.c b/Documentation/firmware_class/firmware_sample_firmware_class.c
index 09eab2f..57b956a 100644
--- a/Documentation/firmware_class/firmware_sample_firmware_class.c
+++ b/Documentation/firmware_class/firmware_sample_firmware_class.c
@@ -14,6 +14,8 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/string.h>
#include <linux/firmware.h>
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 0d01950..7f42e44 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -4,18 +4,18 @@
Supported chips:
* IT8705F
Prefix: 'it87'
- Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
Addresses scanned: I2C 0x28 - 0x2f
- from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* SiS950 [clone of IT8705F]
- Prefix: 'sis950'
- Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Prefix: 'it87'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: No longer be available
Author: Christophe Gauthron <chrisg@0-in.com>
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 2c4cf39..438cb24 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -24,14 +24,14 @@
http://www.national.com/pf/LM/LM86.html
* Analog Devices ADM1032
Prefix: 'adm1032'
- Addresses scanned: I2C 0x4c
+ Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the Analog Devices website
- http://products.analog.com/products/info.asp?product=ADM1032
+ http://www.analog.com/en/prod/0,2877,ADM1032,00.html
* Analog Devices ADT7461
Prefix: 'adt7461'
- Addresses scanned: I2C 0x4c
+ Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the Analog Devices website
- http://products.analog.com/products/info.asp?product=ADT7461
+ http://www.analog.com/en/prod/0,2877,ADT7461,00.html
Note: Only if in ADM1032 compatibility mode
* Maxim MAX6657
Prefix: 'max6657'
@@ -71,8 +71,8 @@
The different chipsets of the family are not strictly identical, although
very similar. This driver doesn't handle any specific feature for now,
-but could if there ever was a need for it. For reference, here comes a
-non-exhaustive list of specific features:
+with the exception of SMBus PEC. For reference, here comes a non-exhaustive
+list of specific features:
LM90:
* Filter and alert configuration register at 0xBF.
@@ -91,6 +91,7 @@
* Conversion averaging.
* Up to 64 conversions/s.
* ALERT is triggered by open remote sensor.
+ * SMBus PEC support for Write Byte and Receive Byte transactions.
ADT7461
* Extended temperature range (breaks compatibility)
@@ -119,3 +120,37 @@
other second; reading them more often will do no harm, but will return
'old' values.
+PEC Support
+-----------
+
+The ADM1032 is the only chip of the family which supports PEC. It does
+not support PEC on all transactions though, so some care must be taken.
+
+When reading a register value, the PEC byte is computed and sent by the
+ADM1032 chip. However, in the case of a combined transaction (SMBus Read
+Byte), the ADM1032 computes the CRC value over only the second half of
+the message rather than its entirety, because it thinks the first half
+of the message belongs to a different transaction. As a result, the CRC
+value differs from what the SMBus master expects, and all reads fail.
+
+For this reason, the lm90 driver will enable PEC for the ADM1032 only if
+the bus supports the SMBus Send Byte and Receive Byte transaction types.
+These transactions will be used to read register values, instead of
+SMBus Read Byte, and PEC will work properly.
+
+Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC.
+Instead, it will try to write the PEC value to the register (because the
+SMBus Send Byte transaction with PEC is similar to a Write Byte transaction
+without PEC), which is not what we want. Thus, PEC is explicitely disabled
+on SMBus Send Byte transactions in the lm90 driver.
+
+PEC on byte data transactions represents a significant increase in bandwidth
+usage (+33% for writes, +25% for reads) in normal conditions. With the need
+to use two SMBus transaction for reads, this overhead jumps to +50%. Worse,
+two transactions will typically mean twice as much delay waiting for
+transaction completion, effectively doubling the register cache refresh time.
+I guess reliability comes at a price, but it's quite expensive this time.
+
+So, as not everyone might enjoy the slowdown, PEC can be disabled through
+sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1
+to that file to enable PEC again.
diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397
index da9d80c..20682f1 100644
--- a/Documentation/hwmon/smsc47b397
+++ b/Documentation/hwmon/smsc47b397
@@ -3,6 +3,7 @@
Supported chips:
* SMSC LPC47B397-NC
+ * SMSC SCH5307-NS
Prefix: 'smsc47b397'
Addresses scanned: none, address read from Super I/O config space
Datasheet: In this file
@@ -12,11 +13,14 @@
November 23, 2004
-The following specification describes the SMSC LPC47B397-NC sensor chip
+The following specification describes the SMSC LPC47B397-NC[1] sensor chip
(for which there is no public datasheet available). This document was
provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
by Mark M. Hoffman <mhoffman@lightlink.com>.
+[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise
+compatible.
+
* * * * *
Methods for detecting the HP SIO and reading the thermal data on a dc7100.
@@ -127,7 +131,7 @@
The registers of interest for identifying the SIO on the dc7100 are Device ID
(0x20) and Device Rev (0x21).
-The Device ID will read 0X6F
+The Device ID will read 0x6F (for SCH5307-NS, 0x81)
The Device Rev currently reads 0x01
Obtaining the HWM Base Address.
diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index 34e6478..c15bbe6 100644
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -12,6 +12,10 @@
http://www.smsc.com/main/datasheets/47m14x.pdf
http://www.smsc.com/main/tools/discontinued/47m15x.pdf
http://www.smsc.com/main/datasheets/47m192.pdf
+ * SMSC LPC47M997
+ Addresses scanned: none, address read from Super I/O config space
+ Prefix: 'smsc47m1'
+ Datasheet: none
Authors:
Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -30,6 +34,9 @@
in addition to the fan monitoring and control. The hardware monitoring
block is not supported by the driver.
+No documentation is available for the 47M997, but it has the same device
+ID as the 47M15x and 47M192 chips and seems to be compatible.
+
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 3464005..764cdc5 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -272,3 +272,6 @@
eeprom Raw EEPROM data in binary form.
Read only.
+
+pec Enable or disable PEC (SMBus only)
+ Read/Write
diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a
index b82014c..a936fb3 100644
--- a/Documentation/hwmon/via686a
+++ b/Documentation/hwmon/via686a
@@ -18,8 +18,9 @@
Module Parameters
-----------------
-force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards
- that don't set the address in the BIOS. Does not do a
+force_addr=0xaddr Set the I/O base address. Useful for boards that
+ don't set the address in the BIOS. Look for a BIOS
+ upgrade before resorting to this. Does not do a
PCI force; the via686a must still be present in lspci.
Don't use this unless the driver complains that the
base address is not set.
@@ -63,3 +64,15 @@
The driver only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
+
+Known Issues
+------------
+
+This driver handles sensors integrated in some VIA south bridges. It is
+possible that a motherboard maker used a VT82C686A/B chip as part of a
+product design but was not interested in its hardware monitoring features,
+in which case the sensor inputs will not be wired. This is the case of
+the Asus K7V, A7V and A7V133 motherboards, to name only a few of them.
+So, if you need the force_addr parameter, and end up with values which
+don't seem to make any sense, don't look any further: your chip is simply
+not wired for hardware monitoring.
diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810
index 0544eb3..83c3b97 100644
--- a/Documentation/i2c/busses/i2c-i810
+++ b/Documentation/i2c/busses/i2c-i810
@@ -2,6 +2,7 @@
Supported adapters:
* Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH)
+ * Intel 82845G (GMCH)
Authors:
Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 702f5ac..9363b8b 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -4,17 +4,18 @@
* VIA Technologies, Inc. VT82C596A/B
Datasheet: Sometimes available at the VIA website
- * VIA Technologies, Inc. VT82C686A/B
+ * VIA Technologies, Inc. VT82C686A/B
Datasheet: Sometimes available at the VIA website
* VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
Datasheet: available on request from Via
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Kyösti Mälkki <kmalkki@cc.hut.fi>,
- Mark D. Studebaker <mdsxyz123@yahoo.com>
+ Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ Mark D. Studebaker <mdsxyz123@yahoo.com>,
+ Jean Delvare <khali@linux-fr.org>
Module Parameters
-----------------
@@ -28,20 +29,22 @@
-----------
i2c-viapro is a true SMBus host driver for motherboards with one of the
-supported VIA southbridges.
+supported VIA south bridges.
Your lspci -n listing must show one of these :
- device 1106:3050 (VT82C596 function 3)
- device 1106:3051 (VT82C596 function 3)
+ device 1106:3050 (VT82C596A function 3)
+ device 1106:3051 (VT82C596B function 3)
device 1106:3057 (VT82C686 function 4)
device 1106:3074 (VT8233)
device 1106:3147 (VT8233A)
- device 1106:8235 (VT8231)
- devide 1106:3177 (VT8235)
- devide 1106:3227 (VT8237)
+ device 1106:8235 (VT8231 function 4)
+ device 1106:3177 (VT8235)
+ device 1106:3227 (VT8237R)
If none of these show up, you should look in the BIOS for settings like
enable ACPI / SMBus or even USB.
-
+Except for the oldest chips (VT82C596A/B, VT82C686A and most probably
+VT8231), this driver supports I2C block transactions. Such transactions
+are mainly useful to read from and write to EEPROMs.
diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205
new file mode 100644
index 0000000..09407c9
--- /dev/null
+++ b/Documentation/i2c/chips/x1205
@@ -0,0 +1,38 @@
+Kernel driver x1205
+===================
+
+Supported chips:
+ * Xicor X1205 RTC
+ Prefix: 'x1205'
+ Addresses scanned: none
+ Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+
+Authors:
+ Karen Spearel <kas11@tampabay.rr.com>,
+ Alessandro Zummo <a.zummo@towertech.it>
+
+Description
+-----------
+
+This module aims to provide complete access to the Xicor X1205 RTC.
+Recently Xicor has merged with Intersil, but the chip is
+still sold under the Xicor brand.
+
+This chip is located at address 0x6f and uses a 2-byte register addressing.
+Two bytes need to be written to read a single register, while most
+other chips just require one and take the second one as the data
+to be written. To prevent corrupting unknown chips, the user must
+explicitely set the probe parameter.
+
+example:
+
+modprobe x1205 probe=0,0x6f
+
+The module supports one more option, hctosys, which is used to set the
+software clock from the x1205. On systems where the x1205 is the
+only hardware rtc, this parameter could be used to achieve a correct
+date/time earlier in the system boot sequence.
+
+example:
+
+modprobe x1205 probe=0,0x6f hctosys=1
diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index 41ffefb..60cca24 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -17,9 +17,10 @@
I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus
adapters typically can not do these)
I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions
- I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_REV_DIR_ADDR,
- I2C_M_REV_DIR_ADDR and I2C_M_REV_DIR_NOSTART
- flags (which modify the i2c protocol!)
+ I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_IGNORE_NAK,
+ I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and
+ I2C_M_NO_RD_ACK flags (which modify the
+ I2C protocol!)
I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command
I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command
I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command
diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
index 4849dfd..184fac2 100644
--- a/Documentation/i2c/porting-clients
+++ b/Documentation/i2c/porting-clients
@@ -82,7 +82,7 @@
exit and exit_free. For i2c+isa drivers, labels should be named
ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before
jumping to error labels. By the way, labels should be left-aligned.
- Use memset to fill the client and data area with 0x00.
+ Use kzalloc instead of kmalloc.
Use i2c_set_clientdata to set the client data (as opposed to
a direct access to client->data).
Use strlcpy instead of strcpy to copy the client name.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 0772757..cff7b65 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -33,8 +33,8 @@
.command = &foo_command /* may be NULL */
}
-The name can be chosen freely, and may be upto 40 characters long. Please
-use something descriptive here.
+The name field must match the driver name, including the case. It must not
+contain spaces, and may be up to 31 characters long.
Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This
means that your driver will be notified when new adapters are found.
@@ -43,9 +43,6 @@
All other fields are for call-back functions which will be explained
below.
-There use to be two additional fields in this structure, inc_use et dec_use,
-for module usage count, but these fields were obsoleted and removed.
-
Extra client data
=================
@@ -58,6 +55,7 @@
An example structure is below.
struct foo_data {
+ struct i2c_client client;
struct semaphore lock; /* For ISA access in `sensors' drivers. */
int sysctl_id; /* To keep the /proc directory entry for
`sensors' drivers. */
@@ -275,6 +273,7 @@
if (is_isa) {
/* Discard immediately if this ISA range is already used */
+ /* FIXME: never use check_region(), only request_region() */
if (check_region(address,FOO_EXTENT))
goto ERROR0;
@@ -310,22 +309,15 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access several i2c functions safely */
- /* Note that we reserve some space for foo_data too. If you don't
- need it, remove it. We do it here to help to lessen memory
- fragmentation. */
- if (! (new_client = kmalloc(sizeof(struct i2c_client) +
- sizeof(struct foo_data),
- GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
- /* This is tricky, but it will set the data to the right value. */
- client->data = new_client + 1;
- data = (struct foo_data *) (client->data);
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
new_client->addr = address;
- new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &foo_driver;
new_client->flags = 0;
@@ -451,7 +443,7 @@
release_region(client->addr,LM78_EXTENT);
/* HYBRID SENSORS CHIP ONLY END */
- kfree(client); /* Frees client data too, if allocated at the same time */
+ kfree(data);
return 0;
}
@@ -576,12 +568,12 @@
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length,
u8 *values);
+ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
+ u8 command, u8 *values);
These ones were removed in Linux 2.6.10 because they had no users, but could
be added back later if needed:
- extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
- u8 command, u8 *values);
extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
u8 command, u8 *values);
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt
index 85f095a..0962c5c 100644
--- a/Documentation/input/yealink.txt
+++ b/Documentation/input/yealink.txt
@@ -2,7 +2,6 @@
0. Status
~~~~~~~~~
-
The p1k is a relatively cheap usb 1.1 phone with:
- keyboard full support, yealink.ko / input event API
- LCD full support, yealink.ko / sysfs API
@@ -17,9 +16,8 @@
1. Compilation (stand alone version)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
Currently only kernel 2.6.x.y versions are supported.
-In order to build the yealink.ko module do:
+In order to build the yealink.ko module do
make
@@ -28,6 +26,21 @@
are located, default /usr/src/linux.
+1.1 Troubleshooting
+~~~~~~~~~~~~~~~~~~~
+Q: Module yealink compiled and installed without any problem but phone
+ is not initialized and does not react to any actions.
+A: If you see something like:
+ hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone
+ in dmesg, it means that the hid driver has grabbed the device first. Try to
+ load module yealink before any other usb hid driver. Please see the
+ instructions provided by your distribution on module configuration.
+
+Q: Phone is working now (displays version and accepts keypad input) but I can't
+ find the sysfs files.
+A: The sysfs files are located on the particular usb endpoint. On most
+ distributions you can do: "find /sys/ -name get_icons" for a hint.
+
2. keyboard features
~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 971589a..5dffcfe 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1460,8 +1460,6 @@
stifb= [HW]
Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
- stram_swap= [HW,M68k]
-
swiotlb= [IA-64] Number of I/O TLB slabs
switches= [HW,M68k]
@@ -1517,8 +1515,6 @@
uart6850= [HW,OSS]
Format: <io>,<irq>
- usb-handoff [HW] Enable early USB BIOS -> OS handoff
-
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index 4afe03a..3115488 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -196,7 +196,7 @@
Keys have an owner user ID, a group access ID, and a permissions mask. The mask
has up to eight bits each for possessor, user, group and other access. Only
-five of each set of eight bits are defined. These permissions granted are:
+six of each set of eight bits are defined. These permissions granted are:
(*) View
@@ -224,6 +224,10 @@
keyring to a key, a process must have Write permission on the keyring and
Link permission on the key.
+ (*) Set Attribute
+
+ This permits a key's UID, GID and permissions mask to be changed.
+
For changing the ownership, group ID or permissions mask, being the owner of
the key or having the sysadmin capability is sufficient.
@@ -242,15 +246,15 @@
this way:
SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY
- 00000001 I----- 39 perm 1f1f0000 0 0 keyring _uid_ses.0: 1/4
- 00000002 I----- 2 perm 1f1f0000 0 0 keyring _uid.0: empty
- 00000007 I----- 1 perm 1f1f0000 0 0 keyring _pid.1: empty
- 0000018d I----- 1 perm 1f1f0000 0 0 keyring _pid.412: empty
- 000004d2 I--Q-- 1 perm 1f1f0000 32 -1 keyring _uid.32: 1/4
- 000004d3 I--Q-- 3 perm 1f1f0000 32 -1 keyring _uid_ses.32: empty
+ 00000001 I----- 39 perm 1f3f0000 0 0 keyring _uid_ses.0: 1/4
+ 00000002 I----- 2 perm 1f3f0000 0 0 keyring _uid.0: empty
+ 00000007 I----- 1 perm 1f3f0000 0 0 keyring _pid.1: empty
+ 0000018d I----- 1 perm 1f3f0000 0 0 keyring _pid.412: empty
+ 000004d2 I--Q-- 1 perm 1f3f0000 32 -1 keyring _uid.32: 1/4
+ 000004d3 I--Q-- 3 perm 1f3f0000 32 -1 keyring _uid_ses.32: empty
00000892 I--QU- 1 perm 1f000000 0 0 user metal:copper: 0
- 00000893 I--Q-N 1 35s 1f1f0000 0 0 user metal:silver: 0
- 00000894 I--Q-- 1 10h 001f0000 0 0 user metal:gold: 0
+ 00000893 I--Q-N 1 35s 1f3f0000 0 0 user metal:silver: 0
+ 00000894 I--Q-- 1 10h 003f0000 0 0 user metal:gold: 0
The flags are:
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt
index e191baa..d5d3f06 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.txt
@@ -626,7 +626,7 @@
can be performed in optimal order. Not all SCSI devices support
tagged queuing (:-().
-4.6 switches=
+4.5 switches=
-------------
Syntax: switches=<list of switches>
@@ -661,28 +661,6 @@
earlier initialization ("ov_"-less) takes precedence. But the
switching-off on reset still happens in this case.
-4.5) stram_swap=
-----------------
-
-Syntax: stram_swap=<do_swap>[,<max_swap>]
-
- This option is available only if the kernel has been compiled with
-CONFIG_STRAM_SWAP enabled. Normally, the kernel then determines
-dynamically whether to actually use ST-RAM as swap space. (Currently,
-the fraction of ST-RAM must be less or equal 1/3 of total memory to
-enable this swapping.) You can override the kernel's decision by
-specifying this option. 1 for <do_swap> means always enable the swap,
-even if you have less alternate RAM. 0 stands for never swap to
-ST-RAM, even if it's small enough compared to the rest of memory.
-
- If ST-RAM swapping is enabled, the kernel usually uses all free
-ST-RAM as swap "device". If the kernel resides in ST-RAM, the region
-allocated by it is obviously never used for swapping :-) You can also
-limit this amount by specifying the second parameter, <max_swap>, if
-you want to use parts of ST-RAM as normal system memory. <max_swap> is
-in kBytes and the number should be a multiple of 4 (otherwise: rounded
-down).
-
5) Options for Amiga Only:
==========================
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
new file mode 100644
index 0000000..a7e4c4e
--- /dev/null
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -0,0 +1,168 @@
+README for MIPS AU1XXX IDE driver - Released 2005-07-15
+
+ABOUT
+-----
+This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the
+services they provide.
+
+If you are short in patience and just want to know how to add your hard disc to
+the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
+section.
+
+
+LICENSE
+-------
+
+Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2 of the License, or (at your option) any later
+version.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+675 Mass Ave, Cambridge, MA 02139, USA.
+
+Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ Interface and Linux Device Driver" Application Note.
+
+
+FILES, CONFIGS AND COMPATABILITY
+--------------------------------
+
+Two files are introduced:
+
+ a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+ containes : struct _auide_hwif
+ struct drive_list_entry dma_white_list
+ struct drive_list_entry dma_black_list
+ timing parameters for PIO mode 0/1/2/3/4
+ timing parameters for MWDMA 0/1/2
+
+ b) 'drivers/ide/mips/au1xxx-ide.c'
+ contains the functionality of the AU1XXX IDE driver
+
+Four configs variables are introduced:
+
+ CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
+ CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
+ CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
+ controler
+ CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
+ per descriptor
+
+If MWDMA is enabled and the connected hard disc is not on the white list, the
+kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE
+performance is substantial slower then in full speed mwdma. In this case
+please add your hard disc to the white list (follow instruction from 'ADD NEW
+HARD DISC TO WHITE OR BLACK LIST' section).
+
+
+SUPPORTED IDE MODES
+-------------------
+
+The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
+MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
+
+To change the PIO mode use the program hdparm with option -p, e.g.
+'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
+-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
+
+
+PERFORMANCE CONFIGURATIONS
+--------------------------
+
+If the used system doesn't need USB support enable the following kernel configs:
+
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+If the used system need the USB support enable the following kernel configs for
+high IDE to USB throughput.
+
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+
+ADD NEW HARD DISC TO WHITE OR BLACK LIST
+----------------------------------------
+
+Step 1 : detect the model name of your hard disc
+
+ a) connect your hard disc to the AU1XXX
+
+ b) boot your kernel and get the hard disc model.
+
+ Example boot log:
+
+ --snipped--
+ Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
+ ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
+ Au1xxx IDE(builtin) configured for MWDMA2
+ Probing IDE interface ide0...
+ hda: Maxtor 6E040L0, ATA DISK drive
+ ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64
+ hda: max request size: 64KiB
+ hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA
+ --snipped--
+
+ In this example 'Maxtor 6E040L0'.
+
+Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+
+ Add your hard disc to the dma_white_list or dma_black_list structur.
+
+Step 3 : Recompile the kernel
+
+ Enable MWDMA support in the kernel configuration. Recompile the kernel and
+ reboot.
+
+Step 4 : Tests
+
+ If you have add a hard disc to the white list, please run some stress tests
+ for verification.
+
+
+ACKNOWLEDGMENTS
+---------------
+
+These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
+IDE driver from AMD.
+
+Additional input also from:
+Matthias Lenk <matthias.lenk@amd.com>
+
+Happy hacking!
+Enrico Walther <enrico.walther@amd.com>
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index a55f0f9..b0fe41d 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -777,7 +777,7 @@
Manually" section, below.
NOTE: It has been observed that some Red Hat supplied kernels
-are apparently unable to rename modules at load time (the "-obonding1"
+are apparently unable to rename modules at load time (the "-o bond1"
part). Attempts to pass that option to modprobe will produce an
"Operation not permitted" error. This has been reported on some
Fedora Core kernels, and has been seen on RHEL 4 as well. On kernels
@@ -883,7 +883,8 @@
its options. In that case, the second options line can be substituted
as follows:
-install bonding1 /sbin/modprobe bonding -obond1 mode=balance-alb miimon=50
+install bond1 /sbin/modprobe --ignore-install bonding -o bond1 \
+ mode=balance-alb miimon=50
This may be repeated any number of times, specifying a new and
unique name in place of bond1 for each subsequent instance.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index b433c8a..65895bb 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -309,7 +309,7 @@
can be consumed by a single TSO frame.
The setting of this parameter is a choice between burstiness and
building larger TSO frames.
- Default: 8
+ Default: 3
tcp_frto - BOOLEAN
Enables F-RTO, an enhanced recovery algorithm for TCP retransmission
diff --git a/MAINTAINERS b/MAINTAINERS
index 767fb61..983f9e9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -116,12 +116,6 @@
L: linux-hams@vger.kernel.org
S: Maintained
-YEALINK PHONE DRIVER
-P: Henk Vergonet
-M: Henk.Vergonet@gmail.com
-L: usbb2k-api-dev@nongnu.org
-S: Maintained
-
8139CP 10/100 FAST ETHERNET DRIVER
P: Jeff Garzik
M: jgarzik@pobox.com
@@ -197,6 +191,15 @@
W: http://linux.thorsten-knabe.de
S: Maintained
+AD1889 SOUND DRIVER
+P: Kyle McMartin
+M: kyle@parisc-linux.org
+P: Thibaut Varene
+M: T-Bone@parisc-linux.org
+W: http://wiki.parisc-linux.org/AD1889
+L: parisc-linux@lists.parisc-linux.org
+S: Maintained
+
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
@@ -1640,7 +1643,7 @@
MIPS
P: Ralf Baechle
M: ralf@linux-mips.org
-W: http://oss.sgi.com/mips/mips-howto.html
+W: http://www.linux-mips.org/
L: linux-mips@linux-mips.org
S: Maintained
@@ -1942,6 +1945,14 @@
L: netdev@vger.kernel.org
S: Supported
+POWERPC 4xx EMAC DRIVER
+P: Eugene Surovegin
+M: ebs@ebshome.net
+W: http://kernel.ebshome.net/emac/
+L: linuxppc-embedded@ozlabs.org
+L: netdev@vger.kernel.org
+S: Maintained
+
PNP SUPPORT
P: Adam Belay
M: ambx1@neo.rr.com
@@ -2275,6 +2286,11 @@
L: tpmdd-devel@lists.sourceforge.net
S: Maintained
+Telecom Clock Driver for MCPL0010
+P: Mark Gross
+M: mark.gross@intel.com
+S: Supported
+
TENSILICA XTENSA PORT (xtensa):
P: Chris Zankel
M: chris@zankel.net
@@ -2486,14 +2502,6 @@
L: linux-usb-devel@lists.sourceforge.net
S: Supported
-USB BLUETOOTH TTY CONVERTER DRIVER
-P: Greg Kroah-Hartman
-M: greg@kroah.com
-L: linux-usb-users@lists.sourceforge.net
-L: linux-usb-devel@lists.sourceforge.net
-S: Maintained
-W: http://www.kroah.com/linux-usb/
-
USB CDC ETHERNET DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
@@ -2727,6 +2735,12 @@
M: rl@hellgate.ch
S: Maintained
+VIAPRO SMBUS DRIVER
+P: Jean Delvare
+M: khali@linux-fr.org
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
UCLINUX (AND M68KNOMMU)
P: Greg Ungerer
M: gerg@uclinux.org
@@ -2848,6 +2862,12 @@
L: linux-hams@vger.kernel.org
S: Maintained
+YEALINK PHONE DRIVER
+P: Henk Vergonet
+M: Henk.Vergonet@gmail.com
+L: usbb2k-api-dev@nongnu.org
+S: Maintained
+
YMFPCI YAMAHA PCI SOUND (Use ALSA instead)
P: Pete Zaitcev
M: zaitcev@yahoo.com
diff --git a/Makefile b/Makefile
index 1fa7e53..7960132 100644
--- a/Makefile
+++ b/Makefile
@@ -334,7 +334,7 @@
PERL = perl
CHECK = sparse
-CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ $(CF)
+CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF)
MODFLAGS = -DMODULE
CFLAGS_MODULE = $(MODFLAGS)
AFLAGS_MODULE = $(MODFLAGS)
@@ -371,8 +371,8 @@
# Files to ignore in find ... statements
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
-export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets
diff --git a/README b/README
index d1edcc7..4ee7dda 100644
--- a/README
+++ b/README
@@ -54,6 +54,10 @@
gzip -cd linux-2.6.XX.tar.gz | tar xvf -
+ or
+ bzip2 -dc linux-2.6.XX.tar.bz2 | tar xvf -
+
+
Replace "XX" with the version number of the latest kernel.
Do NOT use the /usr/src/linux area! This area has a (usually
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index 582a3519f..9903e3a 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -154,7 +154,7 @@
void *
dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int gfp)
+ dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 7cb23f1..c468e31 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -397,7 +397,7 @@
{
void *cpu_addr;
long order = get_order(size);
- int gfp = GFP_ATOMIC;
+ gfp_t gfp = GFP_ATOMIC;
try_again:
cpu_addr = (void *)__get_free_pages(gfp, order);
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 67be50b..6b2921b 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -55,10 +55,6 @@
#include "proto.h"
#include "irq_impl.h"
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
extern unsigned long wall_jiffies; /* kernel/timer.c */
static int set_rtc_mmss(unsigned long);
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index c7481d5..6d52512 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -371,6 +371,8 @@
show_free_areas();
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_node(nid) {
+ unsigned long flags;
+ pgdat_resize_lock(NODE_DATA(nid), &flags);
i = node_spanned_pages(nid);
while (i-- > 0) {
struct page *page = nid_page_nr(nid, i);
@@ -384,6 +386,7 @@
else
shared += page_count(page) - 1;
}
+ pgdat_resize_unlock(NODE_DATA(nid), &flags);
}
printk("%ld pages of RAM\n",total);
printk("%ld free pages\n",free);
diff --git a/arch/alpha/mm/remap.c b/arch/alpha/mm/remap.c
index 19817ad..a78356c 100644
--- a/arch/alpha/mm/remap.c
+++ b/arch/alpha/mm/remap.c
@@ -2,7 +2,6 @@
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
-/* called with the page_table_lock held */
static inline void
remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
unsigned long phys_addr, unsigned long flags)
@@ -31,7 +30,6 @@
} while (address && (address < end));
}
-/* called with the page_table_lock held */
static inline int
remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
unsigned long phys_addr, unsigned long flags)
@@ -46,7 +44,7 @@
if (address >= end)
BUG();
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address,
@@ -70,7 +68,6 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
pmd_t *pmd;
pmd = pmd_alloc(&init_mm, dir, address);
@@ -84,7 +81,6 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
return error;
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 11fff04..682367b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -204,6 +204,7 @@
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
+ select ARM_AMBA
help
This enables support for systems based on the Agilent AAEC-2000
@@ -687,7 +688,8 @@
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+ || MACH_MP1000
source "drivers/ide/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 299bc04..64cf480 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -8,7 +8,7 @@
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p --no-undefined -X
-CPPFLAGS_vmlinux.lds = -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
+CPPFLAGS_vmlinux.lds = -DKERNEL_RAM_ADDR=$(TEXTADDR)
OBJCOPYFLAGS :=-O binary -R .note -R .comment -S
GZFLAGS :=-9
#CFLAGS +=-pipe
@@ -108,27 +108,19 @@
endif
TEXTADDR := $(textaddr-y)
-ifeq ($(CONFIG_XIP_KERNEL),y)
- DATAADDR := $(TEXTADDR)
- xipaddr-$(CONFIG_ARCH_CO285) := 0x5f000000
- xipaddr-y ?= 0xbf000000
- # Replace phys addr with virt addr while keeping offset from base.
- TEXTADDR := $(shell echo $(CONFIG_XIP_PHYS_ADDR) $(xipaddr-y) | \
- awk --non-decimal-data '/[:xdigit:]/ \
- { printf("0x%x\n", and($$1, 0x000fffff) + $$2) }' )
-endif
ifeq ($(incdir-y),)
incdir-y := $(machine-y)
endif
INCDIR := arch-$(incdir-y)
+
ifneq ($(machine-y),)
MACHINE := arch/arm/mach-$(machine-y)/
else
MACHINE :=
endif
-export TEXTADDR DATAADDR GZFLAGS
+export TEXTADDR GZFLAGS
# Do we have FASTFPE?
FASTFPE :=arch/arm/fastfpe
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7c7f475..a54d2eb 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -39,7 +39,8 @@
defined(CONFIG_ARCH_IXP4XX) || \
defined(CONFIG_ARCH_IXP2000) || \
defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP)
+ defined(CONFIG_ARCH_OMAP) || \
+ defined(CONFIG_MACH_MP1000)
.macro loadsp, rb
addruart \rb
.endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 23434b5..50f13ee 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -30,7 +30,7 @@
#define putstr icedcc_putstr
#define putc icedcc_putc
-extern void idedcc_putc(int ch);
+extern void icedcc_putc(int ch);
static void
icedcc_putstr(const char *ptr)
diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c
index c6beb75..e101311 100644
--- a/arch/arm/common/amba.c
+++ b/arch/arm/common/amba.c
@@ -10,6 +10,8 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index cbf2165..ad6c89a 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -33,8 +33,8 @@
#include <asm/cacheflush.h>
#undef DEBUG
-
#undef STATS
+
#ifdef STATS
#define DO_STATS(X) do { X ; } while (0)
#else
@@ -52,26 +52,31 @@
int direction;
/* safe buffer info */
- struct dma_pool *pool;
+ struct dmabounce_pool *pool;
void *safe;
dma_addr_t safe_dma_addr;
};
+struct dmabounce_pool {
+ unsigned long size;
+ struct dma_pool *pool;
+#ifdef STATS
+ unsigned long allocs;
+#endif
+};
+
struct dmabounce_device_info {
struct list_head node;
struct device *dev;
- struct dma_pool *small_buffer_pool;
- struct dma_pool *large_buffer_pool;
struct list_head safe_buffers;
- unsigned long small_buffer_size, large_buffer_size;
#ifdef STATS
- unsigned long sbp_allocs;
- unsigned long lbp_allocs;
unsigned long total_allocs;
unsigned long map_op_count;
unsigned long bounce_count;
#endif
+ struct dmabounce_pool small;
+ struct dmabounce_pool large;
};
static LIST_HEAD(dmabounce_devs);
@@ -82,9 +87,9 @@
printk(KERN_INFO
"%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
device_info->dev->bus_id,
- device_info->sbp_allocs, device_info->lbp_allocs,
- device_info->total_allocs - device_info->sbp_allocs -
- device_info->lbp_allocs,
+ device_info->small.allocs, device_info->large.allocs,
+ device_info->total_allocs - device_info->small.allocs -
+ device_info->large.allocs,
device_info->total_allocs);
}
#endif
@@ -106,18 +111,22 @@
/* allocate a 'safe' buffer and keep track of it */
static inline struct safe_buffer *
alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
- size_t size, enum dma_data_direction dir)
+ size_t size, enum dma_data_direction dir)
{
struct safe_buffer *buf;
- struct dma_pool *pool;
+ struct dmabounce_pool *pool;
struct device *dev = device_info->dev;
- void *safe;
- dma_addr_t safe_dma_addr;
dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n",
__func__, ptr, size, dir);
- DO_STATS ( device_info->total_allocs++ );
+ if (size <= device_info->small.size) {
+ pool = &device_info->small;
+ } else if (size <= device_info->large.size) {
+ pool = &device_info->large;
+ } else {
+ pool = NULL;
+ }
buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC);
if (buf == NULL) {
@@ -125,41 +134,35 @@
return NULL;
}
- if (size <= device_info->small_buffer_size) {
- pool = device_info->small_buffer_pool;
- safe = dma_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
+ buf->ptr = ptr;
+ buf->size = size;
+ buf->direction = dir;
+ buf->pool = pool;
- DO_STATS ( device_info->sbp_allocs++ );
- } else if (size <= device_info->large_buffer_size) {
- pool = device_info->large_buffer_pool;
- safe = dma_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
-
- DO_STATS ( device_info->lbp_allocs++ );
+ if (pool) {
+ buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC,
+ &buf->safe_dma_addr);
} else {
- pool = NULL;
- safe = dma_alloc_coherent(dev, size, &safe_dma_addr, GFP_ATOMIC);
+ buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr,
+ GFP_ATOMIC);
}
- if (safe == NULL) {
- dev_warn(device_info->dev,
- "%s: could not alloc dma memory (size=%d)\n",
- __func__, size);
+ if (buf->safe == NULL) {
+ dev_warn(dev,
+ "%s: could not alloc dma memory (size=%d)\n",
+ __func__, size);
kfree(buf);
return NULL;
}
#ifdef STATS
+ if (pool)
+ pool->allocs++;
+ device_info->total_allocs++;
if (device_info->total_allocs % 1000 == 0)
print_alloc_stats(device_info);
#endif
- buf->ptr = ptr;
- buf->size = size;
- buf->direction = dir;
- buf->pool = pool;
- buf->safe = safe;
- buf->safe_dma_addr = safe_dma_addr;
-
list_add(&buf->node, &device_info->safe_buffers);
return buf;
@@ -186,7 +189,7 @@
list_del(&buf->node);
if (buf->pool)
- dma_pool_free(buf->pool, buf->safe, buf->safe_dma_addr);
+ dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr);
else
dma_free_coherent(device_info->dev, buf->size, buf->safe,
buf->safe_dma_addr);
@@ -197,12 +200,10 @@
/* ************************************************** */
#ifdef STATS
-
static void print_map_stats(struct dmabounce_device_info *device_info)
{
- printk(KERN_INFO
- "%s: dmabounce: map_op_count=%lu, bounce_count=%lu\n",
- device_info->dev->bus_id,
+ dev_info(device_info->dev,
+ "dmabounce: map_op_count=%lu, bounce_count=%lu\n",
device_info->map_op_count, device_info->bounce_count);
}
#endif
@@ -258,13 +259,13 @@
__func__, ptr, buf->safe, size);
memcpy(buf->safe, ptr, size);
}
- consistent_sync(buf->safe, size, dir);
+ ptr = buf->safe;
dma_addr = buf->safe_dma_addr;
- } else {
- consistent_sync(ptr, size, dir);
}
+ consistent_sync(ptr, size, dir);
+
return dma_addr;
}
@@ -278,7 +279,7 @@
/*
* Trying to unmap an invalid mapping
*/
- if (dma_addr == ~0) {
+ if (dma_mapping_error(dma_addr)) {
dev_err(dev, "Trying to unmap invalid mapping\n");
return;
}
@@ -570,11 +571,25 @@
local_irq_restore(flags);
}
+static int
+dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char *name,
+ unsigned long size)
+{
+ pool->size = size;
+ DO_STATS(pool->allocs = 0);
+ pool->pool = dma_pool_create(name, dev, size,
+ 0 /* byte alignment */,
+ 0 /* no page-crossing issues */);
+
+ return pool->pool ? 0 : -ENOMEM;
+}
+
int
dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
unsigned long large_buffer_size)
{
struct dmabounce_device_info *device_info;
+ int ret;
device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
if (!device_info) {
@@ -584,45 +599,31 @@
return -ENOMEM;
}
- device_info->small_buffer_pool =
- dma_pool_create("small_dmabounce_pool",
- dev,
- small_buffer_size,
- 0 /* byte alignment */,
- 0 /* no page-crossing issues */);
- if (!device_info->small_buffer_pool) {
- printk(KERN_ERR
- "dmabounce: could not allocate small DMA pool for %s\n",
- dev->bus_id);
- kfree(device_info);
- return -ENOMEM;
+ ret = dmabounce_init_pool(&device_info->small, dev,
+ "small_dmabounce_pool", small_buffer_size);
+ if (ret) {
+ dev_err(dev,
+ "dmabounce: could not allocate DMA pool for %ld byte objects\n",
+ small_buffer_size);
+ goto err_free;
}
if (large_buffer_size) {
- device_info->large_buffer_pool =
- dma_pool_create("large_dmabounce_pool",
- dev,
- large_buffer_size,
- 0 /* byte alignment */,
- 0 /* no page-crossing issues */);
- if (!device_info->large_buffer_pool) {
- printk(KERN_ERR
- "dmabounce: could not allocate large DMA pool for %s\n",
- dev->bus_id);
- dma_pool_destroy(device_info->small_buffer_pool);
-
- return -ENOMEM;
+ ret = dmabounce_init_pool(&device_info->large, dev,
+ "large_dmabounce_pool",
+ large_buffer_size);
+ if (ret) {
+ dev_err(dev,
+ "dmabounce: could not allocate DMA pool for %ld byte objects\n",
+ large_buffer_size);
+ goto err_destroy;
}
}
device_info->dev = dev;
- device_info->small_buffer_size = small_buffer_size;
- device_info->large_buffer_size = large_buffer_size;
INIT_LIST_HEAD(&device_info->safe_buffers);
#ifdef STATS
- device_info->sbp_allocs = 0;
- device_info->lbp_allocs = 0;
device_info->total_allocs = 0;
device_info->map_op_count = 0;
device_info->bounce_count = 0;
@@ -634,6 +635,12 @@
dev->bus_id, dev->bus->name);
return 0;
+
+ err_destroy:
+ dma_pool_destroy(device_info->small.pool);
+ err_free:
+ kfree(device_info);
+ return ret;
}
void
@@ -655,10 +662,10 @@
BUG();
}
- if (device_info->small_buffer_pool)
- dma_pool_destroy(device_info->small_buffer_pool);
- if (device_info->large_buffer_pool)
- dma_pool_destroy(device_info->large_buffer_pool);
+ if (device_info->small.pool)
+ dma_pool_destroy(device_info->small.pool);
+ if (device_info->large.pool)
+ dma_pool_destroy(device_info->large.pool);
#ifdef STATS
print_alloc_stats(device_info);
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index e8053d1..5cdb412 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -550,15 +550,12 @@
u16 LCM_SPIMD;
};
-static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
+static int locomo_suspend(struct device *dev, pm_message_t state)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long flags;
- if (level != SUSPEND_DISABLE)
- return 0;
-
save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
@@ -597,16 +594,13 @@
return 0;
}
-static int locomo_resume(struct device *dev, u32 level)
+static int locomo_resume(struct device *dev)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long r;
unsigned long flags;
- if (level != RESUME_ENABLE)
- return 0;
-
save = (struct locomo_save_data *) dev->power.saved_state;
if (!save)
return 0;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 1a47fbf9c..21e2a51 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -801,7 +801,7 @@
#ifdef CONFIG_PM
-static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1111_suspend(struct device *dev, pm_message_t state)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
@@ -809,9 +809,6 @@
unsigned int val;
void __iomem *base;
- if (level != SUSPEND_DISABLE)
- return 0;
-
save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
@@ -856,23 +853,19 @@
/*
* sa1111_resume - Restore the SA1111 device state.
* @dev: device to restore
- * @level: resume level
*
* Restore the general state of the SA1111; clock control and
* interrupt controller. Other parts of the SA1111 must be
* restored by their respective drivers, and must be called
* via LDM after this function.
*/
-static int sa1111_resume(struct device *dev, u32 level)
+static int sa1111_resume(struct device *dev)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
unsigned long flags, id;
void __iomem *base;
- if (level != RESUME_ENABLE)
- return 0;
-
save = (struct sa1111_save_data *)dev->power.saved_state;
if (!save)
return 0;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 9e5245c..4af0cf5 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -12,6 +12,9 @@
*/
#include <linux/device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
#include <asm/io.h>
#include <asm/hardware/scoop.h>
@@ -102,26 +105,24 @@
}
#ifdef CONFIG_PM
-static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int scoop_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct scoop_dev *sdev = dev_get_drvdata(dev);
+ struct scoop_dev *sdev = dev_get_drvdata(dev);
- check_scoop_reg(sdev);
- sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
- SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
- }
+ check_scoop_reg(sdev);
+ sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+ SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
+
return 0;
}
-static int scoop_resume(struct device *dev, uint32_t level)
+static int scoop_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct scoop_dev *sdev = dev_get_drvdata(dev);
+ struct scoop_dev *sdev = dev_get_drvdata(dev);
- check_scoop_reg(sdev);
- SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
- }
+ check_scoop_reg(sdev);
+ SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
+
return 0;
}
#else
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index 678720f..ddeb9f9 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -559,7 +559,7 @@
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
#
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
index 261e234..81d3a06 100644
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@@ -559,7 +559,7 @@
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
#
diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig
new file mode 100644
index 0000000..d2cbc6f
--- /dev/null
+++ b/arch/arm/configs/mp1000_defconfig
@@ -0,0 +1,897 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc1
+# Fri Sep 16 15:48:13 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+CONFIG_ARCH_CLPS711X=y
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CEIVA is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
+# CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_FORTUNET is not set
+CONFIG_MACH_MP1000=y
+CONFIG_MP1000_90MHZ=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM720T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_LV4T=y
+CONFIG_CPU_CACHE_V4=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WT=y
+CONFIG_CPU_TLB_V4WT=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=m
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_EDB7312=m
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_MP1000=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_IDE_ARM=y
+CONFIG_BLK_DEV_IDE_MP1000=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_CS89x0=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CLPS711X=y
+CONFIG_SERIAL_CLPS711X_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_WAITQ=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 3e1b032..c11169b 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
+AFLAGS_head.o := -DKERNEL_RAM_ADDR=$(TEXTADDR)
# Object file lists.
diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c
index a418dad..0ee2e98 100644
--- a/arch/arm/kernel/arthur.c
+++ b/arch/arm/kernel/arthur.c
@@ -18,6 +18,7 @@
#include <linux/stddef.h>
#include <linux/signal.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <asm/ptrace.h>
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index c1ff4d1..04d3082 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -94,7 +94,6 @@
DEFINE(VM_EXEC, VM_EXEC);
BLANK();
DEFINE(PAGE_SZ, PAGE_SIZE);
- DEFINE(VIRT_OFFSET, PAGE_OFFSET);
BLANK();
DEFINE(SYS_ERROR0, 0x9f0000);
BLANK();
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 93b5e8e..be439ca 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -15,6 +15,7 @@
*/
#include <linux/config.h>
+#include <asm/memory.h>
#include <asm/glue.h>
#include <asm/vfpmacros.h>
#include <asm/hardware.h> /* should be moved into entry-macro.S */
@@ -310,7 +311,7 @@
#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
@ make sure our user space atomic helper is aborted
- cmp r2, #VIRT_OFFSET
+ cmp r2, #TASK_SIZE
bichs r3, r3, #PSR_Z_BIT
#endif
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 5396263..8d87484 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -21,6 +21,7 @@
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
+#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/system.h>
@@ -33,52 +34,28 @@
#define MACHINFO_PGOFFIO 12
#define MACHINFO_NAME 16
-#ifndef CONFIG_XIP_KERNEL
/*
- * We place the page tables 16K below TEXTADDR. Therefore, we must make sure
- * that TEXTADDR is correctly set. Currently, we expect the least significant
- * 16 bits to be 0x8000, but we could probably relax this restriction to
- * TEXTADDR >= PAGE_OFFSET + 0x4000
- *
- * Note that swapper_pg_dir is the virtual address of the page tables, and
- * pgtbl gives us a position-independent reference to these tables. We can
- * do this because stext == TEXTADDR
+ * swapper_pg_dir is the virtual address of the initial page table.
+ * We place the page tables 16K below KERNEL_RAM_ADDR. Therefore, we must
+ * make sure that KERNEL_RAM_ADDR is correctly set. Currently, we expect
+ * the least significant 16 bits to be 0x8000, but we could probably
+ * relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000.
*/
-#if (TEXTADDR & 0xffff) != 0x8000
-#error TEXTADDR must start at 0xXXXX8000
+#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000
+#error KERNEL_RAM_ADDR must start at 0xXXXX8000
#endif
.globl swapper_pg_dir
- .equ swapper_pg_dir, TEXTADDR - 0x4000
+ .equ swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000
- .macro pgtbl, rd, phys
- adr \rd, stext
- sub \rd, \rd, #0x4000
+ .macro pgtbl, rd
+ ldr \rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000))
.endm
+
+#ifdef CONFIG_XIP_KERNEL
+#define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
#else
-/*
- * XIP Kernel:
- *
- * We place the page tables 16K below DATAADDR. Therefore, we must make sure
- * that DATAADDR is correctly set. Currently, we expect the least significant
- * 16 bits to be 0x8000, but we could probably relax this restriction to
- * DATAADDR >= PAGE_OFFSET + 0x4000
- *
- * Note that pgtbl is meant to return the physical address of swapper_pg_dir.
- * We can't make it relative to the kernel position in this case since
- * the kernel can physically be anywhere.
- */
-#if (DATAADDR & 0xffff) != 0x8000
-#error DATAADDR must start at 0xXXXX8000
-#endif
-
- .globl swapper_pg_dir
- .equ swapper_pg_dir, DATAADDR - 0x4000
-
- .macro pgtbl, rd, phys
- ldr \rd, =((DATAADDR - 0x4000) - VIRT_OFFSET)
- add \rd, \rd, \phys
- .endm
+#define TEXTADDR KERNEL_RAM_ADDR
#endif
/*
@@ -279,7 +256,7 @@
.type __create_page_tables, %function
__create_page_tables:
ldr r5, [r8, #MACHINFO_PHYSRAM] @ physram
- pgtbl r4, r5 @ page table address
+ pgtbl r4 @ page table address
/*
* Clear the 16K level 1 swapper page table
@@ -324,7 +301,7 @@
/*
* Then map first 1MB of ram in case it contains our boot params.
*/
- add r0, r4, #VIRT_OFFSET >> 18
+ add r0, r4, #PAGE_OFFSET >> 18
orr r6, r5, r7
str r6, [r0]
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 1a85cfd..6055e14 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -11,6 +11,7 @@
*/
#include <linux/config.h>
#include <linux/module.h>
+#include <linux/moduleloader.h>
#include <linux/kernel.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index cd99b83..9bd8609 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -782,7 +782,7 @@
return ret;
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret;
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index a94d75f..a917e3d 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -139,93 +139,33 @@
unsigned long storage[0x98/4];
};
-static int page_present(struct mm_struct *mm, void __user *uptr, int wr)
-{
- unsigned long addr = (unsigned long)uptr;
- pgd_t *pgd = pgd_offset(mm, addr);
- if (pgd_present(*pgd)) {
- pmd_t *pmd = pmd_offset(pgd, addr);
- if (pmd_present(*pmd)) {
- pte_t *pte = pte_offset_map(pmd, addr);
- return (pte_present(*pte) && (!wr || pte_write(*pte)));
- }
- }
- return 0;
-}
-
-static int copy_locked(void __user *uptr, void *kptr, size_t size, int write,
- void (*copyfn)(void *, void __user *))
-{
- unsigned char v, __user *userptr = uptr;
- int err = 0;
-
- do {
- struct mm_struct *mm;
-
- if (write) {
- __put_user_error(0, userptr, err);
- __put_user_error(0, userptr + size - 1, err);
- } else {
- __get_user_error(v, userptr, err);
- __get_user_error(v, userptr + size - 1, err);
- }
-
- if (err)
- break;
-
- mm = current->mm;
- spin_lock(&mm->page_table_lock);
- if (page_present(mm, userptr, write) &&
- page_present(mm, userptr + size - 1, write)) {
- copyfn(kptr, uptr);
- } else
- err = 1;
- spin_unlock(&mm->page_table_lock);
- } while (err);
-
- return err;
-}
-
static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
{
- int err = 0;
+ char kbuf[sizeof(*frame) + 8];
+ struct iwmmxt_sigframe *kframe;
/* the iWMMXt context must be 64 bit aligned */
- WARN_ON((unsigned long)frame & 7);
-
- __put_user_error(IWMMXT_MAGIC0, &frame->magic0, err);
- __put_user_error(IWMMXT_MAGIC1, &frame->magic1, err);
-
- /*
- * iwmmxt_task_copy() doesn't check user permissions.
- * Let's do a dummy write on the upper boundary to ensure
- * access to user mem is OK all way up.
- */
- err |= copy_locked(&frame->storage, current_thread_info(),
- sizeof(frame->storage), 1, iwmmxt_task_copy);
- return err;
+ kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
+ kframe->magic0 = IWMMXT_MAGIC0;
+ kframe->magic1 = IWMMXT_MAGIC1;
+ iwmmxt_task_copy(current_thread_info(), &kframe->storage);
+ return __copy_to_user(frame, kframe, sizeof(*frame));
}
static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
{
- unsigned long magic0, magic1;
- int err = 0;
+ char kbuf[sizeof(*frame) + 8];
+ struct iwmmxt_sigframe *kframe;
- /* the iWMMXt context is 64 bit aligned */
- WARN_ON((unsigned long)frame & 7);
-
- /*
- * Validate iWMMXt context signature.
- * Also, iwmmxt_task_restore() doesn't check user permissions.
- * Let's do a dummy write on the upper boundary to ensure
- * access to user mem is OK all way up.
- */
- __get_user_error(magic0, &frame->magic0, err);
- __get_user_error(magic1, &frame->magic1, err);
- if (!err && magic0 == IWMMXT_MAGIC0 && magic1 == IWMMXT_MAGIC1)
- err = copy_locked(&frame->storage, current_thread_info(),
- sizeof(frame->storage), 0, iwmmxt_task_restore);
- return err;
+ /* the iWMMXt context must be 64 bit aligned */
+ kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
+ if (__copy_from_user(kframe, frame, sizeof(*frame)))
+ return -1;
+ if (kframe->magic0 != IWMMXT_MAGIC0 ||
+ kframe->magic1 != IWMMXT_MAGIC1)
+ return -1;
+ iwmmxt_task_restore(current_thread_info(), &kframe->storage);
+ return 0;
}
#endif
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 69449a8..fc47291 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -36,10 +36,6 @@
#include <asm/thread_info.h>
#include <asm/mach/time.h>
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
/*
* Our system timer.
*/
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f6de76e..45e9ea6 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -198,25 +198,16 @@
barrier();
}
-DEFINE_SPINLOCK(die_lock);
-
-/*
- * This function is protected against re-entrancy.
- */
-NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
+static void __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
{
- struct task_struct *tsk = current;
+ struct task_struct *tsk = thread->task;
static int die_counter;
- console_verbose();
- spin_lock_irq(&die_lock);
- bust_spinlocks(1);
-
printk("Internal error: %s: %x [#%d]\n", str, err, ++die_counter);
print_modules();
__show_regs(regs);
printk("Process %s (pid: %d, stack limit = 0x%p)\n",
- tsk->comm, tsk->pid, tsk->thread_info + 1);
+ tsk->comm, tsk->pid, thread + 1);
if (!user_mode(regs) || in_interrupt()) {
dump_mem("Stack: ", regs->ARM_sp,
@@ -224,7 +215,21 @@
dump_backtrace(regs, tsk);
dump_instr(regs);
}
+}
+DEFINE_SPINLOCK(die_lock);
+
+/*
+ * This function is protected against re-entrancy.
+ */
+NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
+{
+ struct thread_info *thread = current_thread_info();
+
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ bust_spinlocks(1);
+ __die(str, err, thread, regs);
bust_spinlocks(0);
spin_unlock_irq(&die_lock);
do_exit(SIGSEGV);
@@ -345,7 +350,9 @@
struct thread_info *thread = current_thread_info();
siginfo_t info;
- if (current->personality != PER_LINUX && thread->exec_domain->handler) {
+ if (current->personality != PER_LINUX &&
+ current->personality != PER_LINUX_32BIT &&
+ thread->exec_domain->handler) {
thread->exec_domain->handler(n, regs);
return regs->ARM_r0;
}
@@ -481,29 +488,33 @@
unsigned long addr = regs->ARM_r2;
struct mm_struct *mm = current->mm;
pgd_t *pgd; pmd_t *pmd; pte_t *pte;
+ spinlock_t *ptl;
regs->ARM_cpsr &= ~PSR_C_BIT;
- spin_lock(&mm->page_table_lock);
+ down_read(&mm->mmap_sem);
pgd = pgd_offset(mm, addr);
if (!pgd_present(*pgd))
goto bad_access;
pmd = pmd_offset(pgd, addr);
if (!pmd_present(*pmd))
goto bad_access;
- pte = pte_offset_map(pmd, addr);
- if (!pte_present(*pte) || !pte_write(*pte))
+ pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ if (!pte_present(*pte) || !pte_write(*pte)) {
+ pte_unmap_unlock(pte, ptl);
goto bad_access;
+ }
val = *(unsigned long *)addr;
val -= regs->ARM_r0;
if (val == 0) {
*(unsigned long *)addr = regs->ARM_r1;
regs->ARM_cpsr |= PSR_C_BIT;
}
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(pte, ptl);
+ up_read(&mm->mmap_sem);
return val;
bad_access:
- spin_unlock(&mm->page_table_lock);
+ up_read(&mm->mmap_sem);
/* simulate a write access fault */
do_DataAbort(addr, 15 + (1 << 11), regs);
return -1;
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 0d5db52..80c8e4c 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,14 +6,23 @@
#include <asm-generic/vmlinux.lds.h>
#include <linux/config.h>
#include <asm/thread_info.h>
+#include <asm/memory.h>
OUTPUT_ARCH(arm)
ENTRY(stext)
+
#ifndef __ARMEB__
jiffies = jiffies_64;
#else
jiffies = jiffies_64 + 4;
#endif
+
+#ifdef CONFIG_XIP_KERNEL
+#define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
+#define TEXTADDR KERNEL_RAM_ADDR
+#endif
+
SECTIONS
{
. = TEXTADDR;
@@ -95,7 +104,7 @@
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
- . = DATAADDR;
+ . = KERNEL_RAM_ADDR;
#else
. = ALIGN(THREAD_SIZE);
__data_loc = .;
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 8725d63..71e5b99 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@
strnlen_user.o strchr.o strrchr.o testchangebit.o \
testclearbit.o testsetbit.o uaccess.o getuser.o \
putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
- ucmpdi2.o lib1funcs.o div64.o \
+ ucmpdi2.o lib1funcs.o div64.o sha1.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o
ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
new file mode 100644
index 0000000..561e207
--- /dev/null
+++ b/arch/arm/lib/ashldi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING. If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__ashldi3)
+
+ subs r3, r2, #32
+ rsb ip, r2, #32
+ movmi ah, ah, lsl r2
+ movpl ah, al, lsl r3
+ orrmi ah, ah, al, lsr ip
+ mov al, al, lsl r2
+ mov pc, lr
+
diff --git a/arch/arm/lib/ashldi3.c b/arch/arm/lib/ashldi3.c
deleted file mode 100644
index b62875c..0000000
--- a/arch/arm/lib/ashldi3.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* More subroutines needed by GCC output code on some machines. */
-/* Compile this one with gcc. */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-/* As a special exception, if you link this library with other files,
- some of which are compiled with GCC, to produce an executable,
- this library does not by itself cause the resulting executable
- to be covered by the GNU General Public License.
- This exception does not however invalidate any other reasons why
- the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton 29/07/01 */
-
-#include "gcclib.h"
-
-s64 __ashldi3(s64 u, int b)
-{
- DIunion w;
- int bm;
- DIunion uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof(s32) * BITS_PER_UNIT) - b;
- if (bm <= 0) {
- w.s.low = 0;
- w.s.high = (u32) uu.s.low << -bm;
- } else {
- u32 carries = (u32) uu.s.low >> bm;
- w.s.low = (u32) uu.s.low << b;
- w.s.high = ((u32) uu.s.high << b) | carries;
- }
-
- return w.ll;
-}
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
new file mode 100644
index 0000000..86fb2a9
--- /dev/null
+++ b/arch/arm/lib/ashrdi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING. If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__ashrdi3)
+
+ subs r3, r2, #32
+ rsb ip, r2, #32
+ movmi al, al, lsr r2
+ movpl al, ah, asr r3
+ orrmi al, al, ah, lsl ip
+ mov ah, ah, asr r2
+ mov pc, lr
+
diff --git a/arch/arm/lib/ashrdi3.c b/arch/arm/lib/ashrdi3.c
deleted file mode 100644
index 9a8600a..0000000
--- a/arch/arm/lib/ashrdi3.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* More subroutines needed by GCC output code on some machines. */
-/* Compile this one with gcc. */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-/* As a special exception, if you link this library with other files,
- some of which are compiled with GCC, to produce an executable,
- this library does not by itself cause the resulting executable
- to be covered by the GNU General Public License.
- This exception does not however invalidate any other reasons why
- the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton 29/07/01 */
-
-#include "gcclib.h"
-
-s64 __ashrdi3(s64 u, int b)
-{
- DIunion w;
- int bm;
- DIunion uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof(s32) * BITS_PER_UNIT) - b;
- if (bm <= 0) {
- /* w.s.high = 1..1 or 0..0 */
- w.s.high = uu.s.high >> (sizeof(s32) * BITS_PER_UNIT - 1);
- w.s.low = uu.s.high >> -bm;
- } else {
- u32 carries = (u32) uu.s.high << bm;
- w.s.high = uu.s.high >> b;
- w.s.low = ((u32) uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
diff --git a/arch/arm/lib/gcclib.h b/arch/arm/lib/gcclib.h
deleted file mode 100644
index 8b6dcc6..0000000
--- a/arch/arm/lib/gcclib.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* gcclib.h -- definitions for various functions 'borrowed' from gcc-2.95.3 */
-/* I Molton 29/07/01 */
-
-#include <linux/types.h>
-
-#define BITS_PER_UNIT 8
-#define SI_TYPE_SIZE (sizeof(s32) * BITS_PER_UNIT)
-
-#ifdef __ARMEB__
-struct DIstruct {
- s32 high, low;
-};
-#else
-struct DIstruct {
- s32 low, high;
-};
-#endif
-
-typedef union {
- struct DIstruct s;
- s64 ll;
-} DIunion;
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
new file mode 100644
index 0000000..46c2ed1
--- /dev/null
+++ b/arch/arm/lib/lshrdi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING. If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__lshrdi3)
+
+ subs r3, r2, #32
+ rsb ip, r2, #32
+ movmi al, al, lsr r2
+ movpl al, ah, lsr r3
+ orrmi al, al, ah, lsl ip
+ mov ah, ah, lsr r2
+ mov pc, lr
+
diff --git a/arch/arm/lib/lshrdi3.c b/arch/arm/lib/lshrdi3.c
deleted file mode 100644
index 3681f49..0000000
--- a/arch/arm/lib/lshrdi3.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* More subroutines needed by GCC output code on some machines. */
-/* Compile this one with gcc. */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-/* As a special exception, if you link this library with other files,
- some of which are compiled with GCC, to produce an executable,
- this library does not by itself cause the resulting executable
- to be covered by the GNU General Public License.
- This exception does not however invalidate any other reasons why
- the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton 29/07/01 */
-
-#include "gcclib.h"
-
-s64 __lshrdi3(s64 u, int b)
-{
- DIunion w;
- int bm;
- DIunion uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof(s32) * BITS_PER_UNIT) - b;
- if (bm <= 0) {
- w.s.high = 0;
- w.s.low = (u32) uu.s.high >> -bm;
- } else {
- u32 carries = (u32) uu.s.high << bm;
- w.s.high = (u32) uu.s.high >> b;
- w.s.low = ((u32) uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S
new file mode 100644
index 0000000..c7fbdf0
--- /dev/null
+++ b/arch/arm/lib/muldi3.S
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/lib/muldi3.S
+ *
+ * Author: Nicolas Pitre
+ * Created: Oct 19, 2005
+ * Copyright: Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
+#else
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
+#endif
+
+ENTRY(__muldi3)
+
+ mul xh, yl, xh
+ mla xh, xl, yh, xh
+ mov ip, xl, asr #16
+ mov yh, yl, asr #16
+ bic xl, xl, ip, lsl #16
+ bic yl, yl, yh, lsl #16
+ mla xh, yh, ip, xh
+ mul yh, xl, yh
+ mul xl, yl, xl
+ mul ip, yl, ip
+ adds xl, xl, yh, lsl #16
+ adc xh, xh, yh, lsr #16
+ adds xl, xl, ip, lsl #16
+ adc xh, xh, ip, lsr #16
+ mov pc, lr
+
diff --git a/arch/arm/lib/muldi3.c b/arch/arm/lib/muldi3.c
deleted file mode 100644
index 0a3b933..0000000
--- a/arch/arm/lib/muldi3.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* More subroutines needed by GCC output code on some machines. */
-/* Compile this one with gcc. */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-/* As a special exception, if you link this library with other files,
- some of which are compiled with GCC, to produce an executable,
- this library does not by itself cause the resulting executable
- to be covered by the GNU General Public License.
- This exception does not however invalidate any other reasons why
- the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton 29/07/01 */
-
-#include "gcclib.h"
-
-#define umul_ppmm(xh, xl, a, b) \
-{register u32 __t0, __t1, __t2; \
- __asm__ ("%@ Inlined umul_ppmm \n\
- mov %2, %5, lsr #16 \n\
- mov %0, %6, lsr #16 \n\
- bic %3, %5, %2, lsl #16 \n\
- bic %4, %6, %0, lsl #16 \n\
- mul %1, %3, %4 \n\
- mul %4, %2, %4 \n\
- mul %3, %0, %3 \n\
- mul %0, %2, %0 \n\
- adds %3, %4, %3 \n\
- addcs %0, %0, #65536 \n\
- adds %1, %1, %3, lsl #16 \n\
- adc %0, %0, %3, lsr #16" \
- : "=&r" ((u32) (xh)), \
- "=r" ((u32) (xl)), \
- "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \
- : "r" ((u32) (a)), \
- "r" ((u32) (b)));}
-
-#define __umulsidi3(u, v) \
- ({DIunion __w; \
- umul_ppmm (__w.s.high, __w.s.low, u, v); \
- __w.ll; })
-
-s64 __muldi3(s64 u, s64 v)
-{
- DIunion w;
- DIunion uu, vv;
-
- uu.ll = u, vv.ll = v;
-
- w.ll = __umulsidi3(uu.s.low, vv.s.low);
- w.s.high += ((u32) uu.s.low * (u32) vv.s.high
- + (u32) uu.s.high * (u32) vv.s.low);
-
- return w.ll;
-}
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
new file mode 100644
index 0000000..ff6ece4
--- /dev/null
+++ b/arch/arm/lib/sha1.S
@@ -0,0 +1,206 @@
+/*
+ * linux/arch/arm/lib/sha1.S
+ *
+ * SHA transform optimized for ARM
+ *
+ * Copyright: (C) 2005 by Nicolas Pitre <nico@cam.org>
+ * Created: September 17, 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The reference implementation for this code is linux/lib/sha1.c
+ */
+
+#include <linux/linkage.h>
+
+ .text
+
+
+/*
+ * void sha_transform(__u32 *digest, const char *in, __u32 *W)
+ *
+ * Note: the "in" ptr may be unaligned.
+ */
+
+ENTRY(sha_transform)
+
+ stmfd sp!, {r4 - r8, lr}
+
+ @ for (i = 0; i < 16; i++)
+ @ W[i] = be32_to_cpu(in[i]); */
+
+#ifdef __ARMEB__
+ mov r4, r0
+ mov r0, r2
+ mov r2, #64
+ bl memcpy
+ mov r2, r0
+ mov r0, r4
+#else
+ mov r3, r2
+ mov lr, #16
+1: ldrb r4, [r1], #1
+ ldrb r5, [r1], #1
+ ldrb r6, [r1], #1
+ ldrb r7, [r1], #1
+ subs lr, lr, #1
+ orr r5, r5, r4, lsl #8
+ orr r6, r6, r5, lsl #8
+ orr r7, r7, r6, lsl #8
+ str r7, [r3], #4
+ bne 1b
+#endif
+
+ @ for (i = 0; i < 64; i++)
+ @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
+
+ sub r3, r2, #4
+ mov lr, #64
+2: ldr r4, [r3, #4]!
+ subs lr, lr, #1
+ ldr r5, [r3, #8]
+ ldr r6, [r3, #32]
+ ldr r7, [r3, #52]
+ eor r4, r4, r5
+ eor r4, r4, r6
+ eor r4, r4, r7
+ mov r4, r4, ror #31
+ str r4, [r3, #64]
+ bne 2b
+
+ /*
+ * The SHA functions are:
+ *
+ * f1(B,C,D) = (D ^ (B & (C ^ D)))
+ * f2(B,C,D) = (B ^ C ^ D)
+ * f3(B,C,D) = ((B & C) | (D & (B | C)))
+ *
+ * Then the sub-blocks are processed as follows:
+ *
+ * A' = ror(A, 27) + f(B,C,D) + E + K + *W++
+ * B' = A
+ * C' = ror(B, 2)
+ * D' = C
+ * E' = D
+ *
+ * We therefore unroll each loop 5 times to avoid register shuffling.
+ * Also the ror for C (and also D and E which are successivelyderived
+ * from it) is applied in place to cut on an additional mov insn for
+ * each round.
+ */
+
+ .macro sha_f1, A, B, C, D, E
+ ldr r3, [r2], #4
+ eor ip, \C, \D
+ add \E, r1, \E, ror #2
+ and ip, \B, ip, ror #2
+ add \E, \E, \A, ror #27
+ eor ip, ip, \D, ror #2
+ add \E, \E, r3
+ add \E, \E, ip
+ .endm
+
+ .macro sha_f2, A, B, C, D, E
+ ldr r3, [r2], #4
+ add \E, r1, \E, ror #2
+ eor ip, \B, \C, ror #2
+ add \E, \E, \A, ror #27
+ eor ip, ip, \D, ror #2
+ add \E, \E, r3
+ add \E, \E, ip
+ .endm
+
+ .macro sha_f3, A, B, C, D, E
+ ldr r3, [r2], #4
+ add \E, r1, \E, ror #2
+ orr ip, \B, \C, ror #2
+ add \E, \E, \A, ror #27
+ and ip, ip, \D, ror #2
+ add \E, \E, r3
+ and r3, \B, \C, ror #2
+ orr ip, ip, r3
+ add \E, \E, ip
+ .endm
+
+ ldmia r0, {r4 - r8}
+
+ mov lr, #4
+ ldr r1, .L_sha_K + 0
+
+ /* adjust initial values */
+ mov r6, r6, ror #30
+ mov r7, r7, ror #30
+ mov r8, r8, ror #30
+
+3: subs lr, lr, #1
+ sha_f1 r4, r5, r6, r7, r8
+ sha_f1 r8, r4, r5, r6, r7
+ sha_f1 r7, r8, r4, r5, r6
+ sha_f1 r6, r7, r8, r4, r5
+ sha_f1 r5, r6, r7, r8, r4
+ bne 3b
+
+ ldr r1, .L_sha_K + 4
+ mov lr, #4
+
+4: subs lr, lr, #1
+ sha_f2 r4, r5, r6, r7, r8
+ sha_f2 r8, r4, r5, r6, r7
+ sha_f2 r7, r8, r4, r5, r6
+ sha_f2 r6, r7, r8, r4, r5
+ sha_f2 r5, r6, r7, r8, r4
+ bne 4b
+
+ ldr r1, .L_sha_K + 8
+ mov lr, #4
+
+5: subs lr, lr, #1
+ sha_f3 r4, r5, r6, r7, r8
+ sha_f3 r8, r4, r5, r6, r7
+ sha_f3 r7, r8, r4, r5, r6
+ sha_f3 r6, r7, r8, r4, r5
+ sha_f3 r5, r6, r7, r8, r4
+ bne 5b
+
+ ldr r1, .L_sha_K + 12
+ mov lr, #4
+
+6: subs lr, lr, #1
+ sha_f2 r4, r5, r6, r7, r8
+ sha_f2 r8, r4, r5, r6, r7
+ sha_f2 r7, r8, r4, r5, r6
+ sha_f2 r6, r7, r8, r4, r5
+ sha_f2 r5, r6, r7, r8, r4
+ bne 6b
+
+ ldmia r0, {r1, r2, r3, ip, lr}
+ add r4, r1, r4
+ add r5, r2, r5
+ add r6, r3, r6, ror #2
+ add r7, ip, r7, ror #2
+ add r8, lr, r8, ror #2
+ stmia r0, {r4 - r8}
+
+ ldmfd sp!, {r4 - r8, pc}
+
+.L_sha_K:
+ .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
+
+
+/*
+ * void sha_init(__u32 *buf)
+ */
+
+.L_sha_initial_digest:
+ .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
+
+ENTRY(sha_init)
+
+ str lr, [sp, #-4]!
+ adr r1, .L_sha_initial_digest
+ ldmia r1, {r1, r2, r3, ip, lr}
+ stmia r0, {r1, r2, r3, ip, lr}
+ ldr pc, [sp], #4
+
diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S
new file mode 100644
index 0000000..112630f
--- /dev/null
+++ b/arch/arm/lib/ucmpdi2.S
@@ -0,0 +1,35 @@
+/*
+ * linux/arch/arm/lib/ucmpdi2.S
+ *
+ * Author: Nicolas Pitre
+ * Created: Oct 19, 2005
+ * Copyright: Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
+#else
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
+#endif
+
+ENTRY(__ucmpdi2)
+
+ cmp xh, yh
+ cmpeq xl, yl
+ movlo r0, #0
+ moveq r0, #1
+ movhi r0, #2
+ mov pc, lr
+
diff --git a/arch/arm/lib/ucmpdi2.c b/arch/arm/lib/ucmpdi2.c
deleted file mode 100644
index 57f3f2d..0000000
--- a/arch/arm/lib/ucmpdi2.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* More subroutines needed by GCC output code on some machines. */
-/* Compile this one with gcc. */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-/* As a special exception, if you link this library with other files,
- some of which are compiled with GCC, to produce an executable,
- this library does not by itself cause the resulting executable
- to be covered by the GNU General Public License.
- This exception does not however invalidate any other reasons why
- the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton 29/07/01 */
-
-#include "gcclib.h"
-
-int __ucmpdi2(s64 a, s64 b)
-{
- DIunion au, bu;
-
- au.ll = a, bu.ll = b;
-
- if ((u32) au.s.high < (u32) bu.s.high)
- return 0;
- else if ((u32) au.s.high > (u32) bu.s.high)
- return 2;
- if ((u32) au.s.low < (u32) bu.s.low)
- return 0;
- else if ((u32) au.s.low > (u32) bu.s.low)
- return 2;
- return 1;
-}
diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile
index 20ec838..a8e462f 100644
--- a/arch/arm/mach-aaec2000/Makefile
+++ b/arch/arm/mach-aaec2000/Makefile
@@ -3,7 +3,7 @@
#
# Common support (must be linked before board specific support)
-obj-y += core.o
+obj-y += core.o clock.o
# Specific board support
obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index c9d8998..f5ef697 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -27,16 +27,65 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/arch/aaed2000.h>
+
#include "core.h"
+static void aaed2000_clcd_disable(struct clcd_fb *fb)
+{
+ AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
+}
+
+static void aaed2000_clcd_enable(struct clcd_fb *fb)
+{
+ AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
+}
+
+struct aaec2000_clcd_info clcd_info = {
+ .enable = aaed2000_clcd_enable,
+ .disable = aaed2000_clcd_disable,
+ .panel = {
+ .mode = {
+ .name = "Sharp",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 20,
+ .right_margin = 44,
+ .upper_margin = 21,
+ .lower_margin = 34,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IVS | TIM2_IHS,
+ .cntl = CNTL_LCDTFT,
+ .bpp = 16,
+ },
+};
+
static void __init aaed2000_init_irq(void)
{
aaec2000_init_irq();
}
+static void __init aaed2000_init(void)
+{
+ aaec2000_set_clcd_plat_data(&clcd_info);
+}
+
+static struct map_desc aaed2000_io_desc[] __initdata = {
+ { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
+};
+
static void __init aaed2000_map_io(void)
{
aaec2000_map_io();
+ iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
}
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
@@ -47,4 +96,5 @@
.map_io = aaed2000_map_io,
.init_irq = aaed2000_init_irq,
.timer = &aaec2000_timer,
+ .init_machine = aaed2000_init,
MACHINE_END
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
new file mode 100644
index 0000000..99e0191
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -0,0 +1,110 @@
+/*
+ * linux/arch/arm/mach-aaec2000/clock.c
+ *
+ * Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ * Based on linux/arch/arm/mach-integrator/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware/clock.h>
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ down(&clocks_sem);
+ list_for_each_entry(p, &clocks, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ up(&clocks_sem);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_register(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_add(&clk->node, &clocks);
+ up(&clocks_sem);
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_del(&clk->node);
+ up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+ return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-aaec2000/clock.h b/arch/arm/mach-aaec2000/clock.h
new file mode 100644
index 0000000..d4bb74f
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.h
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-aaec2000/clock.h
+ *
+ * Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ * Based on linux/arch/arm/mach-integrator/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct module;
+
+struct clk {
+ struct list_head node;
+ unsigned long rate;
+ struct module *owner;
+ const char *name;
+ void *data;
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index aece0cd..0c53dab 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -13,19 +13,27 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
+#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/signal.h>
#include <asm/hardware.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/hardware/amba.h>
+#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include "core.h"
+#include "clock.h"
+
/*
* Common I/O mapping:
*
@@ -40,9 +48,17 @@
* default mapping provided here.
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE },
- { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE }
+ {
+ .virtual = VIO_APB_BASE,
+ .physical = __phys_to_pfn(PIO_APB_BASE),
+ .length = IO_APB_LENGTH,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VIO_AHB_BASE,
+ .physical = __phys_to_pfn(PIO_AHB_BASE),
+ .length = IO_AHB_LENGTH,
+ .type = MT_DEVICE
+ }
};
void __init aaec2000_map_io(void)
@@ -155,3 +171,116 @@
.offset = aaec2000_gettimeoffset,
};
+static struct clcd_panel mach_clcd_panel;
+
+static int aaec2000_clcd_setup(struct clcd_fb *fb)
+{
+ dma_addr_t dma;
+
+ fb->panel = &mach_clcd_panel;
+
+ fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
+ &dma, GFP_KERNEL);
+
+ if (!fb->fb.screen_base) {
+ printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+ return -ENOMEM;
+ }
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = SZ_1M;
+
+ return 0;
+}
+
+static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma,
+ fb->fb.screen_base,
+ fb->fb.fix.smem_start,
+ fb->fb.fix.smem_len);
+}
+
+static void aaec2000_clcd_remove(struct clcd_fb *fb)
+{
+ dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board clcd_plat_data = {
+ .name = "AAEC-2000",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .setup = aaec2000_clcd_setup,
+ .mmap = aaec2000_clcd_mmap,
+ .remove = aaec2000_clcd_remove,
+};
+
+static struct amba_device clcd_device = {
+ .dev = {
+ .bus_id = "mb:16",
+ .coherent_dma_mask = ~0,
+ .platform_data = &clcd_plat_data,
+ },
+ .res = {
+ .start = AAEC_CLCD_PHYS,
+ .end = AAEC_CLCD_PHYS + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { INT_LCD, NO_IRQ },
+ .periphid = 0x41110,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &clcd_device,
+};
+
+static struct clk aaec2000_clcd_clk = {
+ .name = "CLCDCLK",
+};
+
+void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
+{
+ clcd_plat_data.enable = clcd->enable;
+ clcd_plat_data.disable = clcd->disable;
+ memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
+}
+
+static struct flash_platform_data aaec2000_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 4,
+};
+
+static struct resource aaec2000_flash_resource = {
+ .start = AAEC_FLASH_BASE,
+ .end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device aaec2000_flash_device = {
+ .name = "armflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &aaec2000_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &aaec2000_flash_resource,
+};
+
+static int __init aaec2000_init(void)
+{
+ int i;
+
+ clk_register(&aaec2000_clcd_clk);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+
+ platform_device_register(&aaec2000_flash_device);
+
+ return 0;
+};
+arch_initcall(aaec2000_init);
+
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
index 91893d8..daefc0e 100644
--- a/arch/arm/mach-aaec2000/core.h
+++ b/arch/arm/mach-aaec2000/core.h
@@ -9,8 +9,19 @@
*
*/
+#include <asm/hardware/amba_clcd.h>
+
struct sys_timer;
extern struct sys_timer aaec2000_timer;
extern void __init aaec2000_map_io(void);
extern void __init aaec2000_init_irq(void);
+
+struct aaec2000_clcd_info {
+ struct clcd_panel panel;
+ void (*disable)(struct clcd_fb *);
+ void (*enable)(struct clcd_fb *);
+};
+
+extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);
+
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0793dcf..d5c1550 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -69,6 +69,17 @@
You almost surely want to say N here.
+config MACH_MP1000
+ bool "MACH_MP1000"
+ help
+ Say Y if you intend to run the kernel on the Comdial MP1000 platform.
+
+config MP1000_90MHZ
+ bool "MP1000_90MHZ"
+ depends on MACH_MP1000
+ help
+ Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
+
endmenu
endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a19731..8a6dc1c 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
+obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index dc73feb..43b9423 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -46,10 +46,14 @@
*/
static struct map_desc autcpu12_io_desc[] __initdata = {
- /* virtual, physical, length, type */
- /* memory-mapped extra io and CS8900A Ethernet chip */
- /* ethernet chip */
- { AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, MT_DEVICE }
+ /* memory-mapped extra io and CS8900A Ethernet chip */
+ /* ethernet chip */
+ {
+ .virtual = AUTCPU12_VIRT_CS8900A,
+ .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init autcpu12_map_io(void)
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index a46c82c..cba7be5 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -39,7 +39,12 @@
* ethernet driver, perhaps.
*/
static struct map_desc cdb89712_io_desc[] __initdata = {
- { ETHER_BASE, ETHER_START, ETHER_SIZE, MT_DEVICE }
+ {
+ .virtual = ETHER_BASE,
+ .pfn =__phys_to_pfn(ETHER_START),
+ .length = ETHER_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init cdb89712_map_io(void)
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 780d918..35d51a7 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -37,11 +37,13 @@
#include "common.h"
static struct map_desc ceiva_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* SED1355 controlled video RAM & registers */
- { CEIVA_VIRT_SED1355, CEIVA_PHYS_SED1355, SZ_2M, MT_DEVICE }
-
+ /* SED1355 controlled video RAM & registers */
+ {
+ .virtual = CEIVA_VIRT_SED1355,
+ .pfn = __phys_to_pfn(CEIVA_PHYS_SED1355),
+ .length = SZ_2M,
+ .type = MT_DEVICE
+ }
};
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 7fd7b01..72f8bb0 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -51,15 +51,27 @@
* happens).
*/
static struct map_desc edb7211_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* memory-mapped extra keyboard row and CS8900A Ethernet chip */
- { EP7211_VIRT_EXTKBD, EP7211_PHYS_EXTKBD, SZ_1M, MT_DEVICE },
- { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, SZ_1M, MT_DEVICE },
-
- /* flash banks */
- { EP7211_VIRT_FLASH1, EP7211_PHYS_FLASH1, SZ_8M, MT_DEVICE },
- { EP7211_VIRT_FLASH2, EP7211_PHYS_FLASH2, SZ_8M, MT_DEVICE }
+ { /* memory-mapped extra keyboard row */
+ .virtual = EP7211_VIRT_EXTKBD,
+ .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD),
+ .length = SZ_1M,
+ .type - MT_DEVICE
+ }, { /* and CS8900A Ethernet chip */
+ .virtual = EP7211_VIRT_CS8900A,
+ .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, { /* flash banks */
+ .virtual = EP7211_VIRT_FLASH1,
+ .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1),
+ .length = SZ_8M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = EP7211_VIRT_FLASH2,
+ .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2),
+ .length = SZ_8M,
+ .type = MT_DEVICE
+ }
};
void __init edb7211_map_io(void)
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index 120b7ca..a00f77ef 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <asm/sizes.h>
#include <asm/hardware.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -34,7 +35,12 @@
* This maps the generic CLPS711x registers
*/
static struct map_desc clps711x_io_desc[] __initdata = {
- { CLPS7111_VIRT_BASE, CLPS7111_PHYS_BASE, 1048576, MT_DEVICE }
+ {
+ .virtual = CLPS7111_VIRT_BASE,
+ .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init clps711x_map_io(void)
diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c
new file mode 100644
index 0000000..c2816bc
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mach.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/mach-mp1000/mp1000.c
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/mp1000-seprom.h>
+
+#include "common.h"
+
+extern void mp1000_map_io(void);
+
+static void __init mp1000_init(void)
+{
+ seprom_init();
+}
+
+MACHINE_START(MP1000, "Comdial MP1000")
+ /* Maintainer: Jon Ringle */
+ .phys_ram = 0xc0000000,
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
+ .boot_params = 0xc0015100,
+ .map_io = mp1000_map_io,
+ .init_irq = clps711x_init_irq,
+ .init_machine = mp1000_init,
+ .timer = &clps711x_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c
new file mode 100644
index 0000000..20e810b
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mm.c
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/arm/mach-mp1000/mm.c
+ *
+ * Extra MM routines for the MP1000
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/map.h>
+
+extern void clps711x_map_io(void);
+
+static struct map_desc mp1000_io_desc[] __initdata = {
+ { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE },
+ { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE },
+ { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE },
+ { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE },
+ { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE },
+ { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE }
+};
+
+void __init mp1000_map_io(void)
+{
+ clps711x_map_io();
+ iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
+}
diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c
new file mode 100644
index 0000000..b22d0be
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-seprom.c
@@ -0,0 +1,195 @@
+/*`
+ * mp1000-seprom.c
+ *
+ * This file contains the Serial EEPROM code for the MP1000 board
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/arch/mp1000-seprom.h>
+
+/* If SepromInit() can initialize and checksum the seprom successfully, */
+/* then it will point seprom_data_ptr at the shadow copy. */
+
+static eeprom_struct seprom_data; /* shadow copy of seprom content */
+
+eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */
+
+/*
+ * Port D Bit 5 is Chip Select for EEPROM
+ * Port E Bit 0 is Input, Data out from EEPROM
+ * Port E Bit 1 is Output, Data in to EEPROM
+ * Port E Bit 2 is Output, CLK to EEPROM
+ */
+
+static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
+static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
+
+#define NO_OF_SHORTS 64 // Device is 64 x 16 bits
+#define ENABLE_RW 0
+#define DISABLE_RW 1
+
+static inline void toggle_seprom_clock(void)
+{
+ *port_e_ptr |= HwPortESepromCLK;
+ *port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void select_eeprom(void)
+{
+ *port_d_ptr |= HwPortDEECS;
+ *port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void deselect_eeprom(void)
+{
+ *port_d_ptr &= ~(HwPortDEECS);
+ *port_e_ptr &= ~(HwPortESepromDIn);
+}
+
+/*
+ * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
+ * and returns 0 if seprom is not initialized or
+ * has a checksum error.
+ */
+
+eeprom_struct* get_seprom_ptr(void)
+{
+ return seprom_data_ptr;
+}
+
+unsigned char* get_eeprom_mac_address(void)
+{
+ return seprom_data_ptr->variant.eprom_struct.mac_Address;
+}
+
+/*
+ * ReadSProm, Physically reads data from the Serial PROM
+ */
+static void read_sprom(short address, int length, eeprom_struct *buffer)
+{
+ short data = COMMAND_READ | (address & 0x3F);
+ short bit;
+ int i;
+
+ select_eeprom();
+
+ // Clock in 9 bits of the command
+ for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
+ if (data & bit)
+ *port_e_ptr |= HwPortESepromDIn;
+ else
+ *port_e_ptr &= ~(HwPortESepromDIn);
+
+ toggle_seprom_clock();
+ }
+
+ //
+ // Now read one or more shorts of data from the Seprom
+ //
+ while (length-- > 0) {
+ data = 0;
+
+ // Read 16 bits at a time
+ for (i = 0; i < 16; i++) {
+ data <<= 1;
+ toggle_seprom_clock();
+ data |= *port_e_ptr & HwPortESepromDOut;
+
+ }
+
+ buffer->variant.eprom_short_data[address++] = data;
+ }
+
+ deselect_eeprom();
+
+ return;
+}
+
+
+
+/*
+ * ReadSerialPROM
+ *
+ * Input: Pointer to array of 64 x 16 Bits
+ *
+ * Output: if no problem reading data is filled in
+ */
+static void read_serial_prom(eeprom_struct *data)
+{
+ read_sprom(0, 64, data);
+}
+
+
+//
+// Compute Serial EEPROM checksum
+//
+// Input: Pointer to struct with Eprom data
+//
+// Output: The computed Eprom checksum
+//
+static short compute_seprom_checksum(eeprom_struct *data)
+{
+ short checksum = 0;
+ int i;
+
+ for (i = 0; i < 126; i++) {
+ checksum += (short)data->variant.eprom_byte_data[i];
+ }
+
+ return((short)(0x5555 - (checksum & 0xFFFF)));
+}
+
+//
+// Make sure the data port bits for the SEPROM are correctly initialised
+//
+
+void __init seprom_init(void)
+{
+ short checksum;
+
+ // Init Port D
+ *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
+ *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
+
+ // Init Port E
+ *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
+ *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
+
+ //
+ // Make sure that EEPROM struct size never exceeds 128 bytes
+ //
+ if (sizeof(eeprom_struct) > 128) {
+ panic("Serial PROM struct size > 128, aborting read\n");
+ }
+
+ read_serial_prom(&seprom_data);
+
+ checksum = compute_seprom_checksum(&seprom_data);
+
+ if (checksum != seprom_data.variant.eprom_short_data[63]) {
+ panic("Serial EEPROM checksum failed\n");
+ }
+
+ seprom_data_ptr = &seprom_data;
+}
+
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 5bdb90e..a1acb94 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -29,6 +29,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/setup.h>
+#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -42,8 +43,17 @@
* We map both here.
*/
static struct map_desc p720t_io_desc[] __initdata = {
- { SYSPLD_VIRT_BASE, SYSPLD_PHYS_BASE, 1048576, MT_DEVICE },
- { 0xfe400000, 0x10400000, 1048576, MT_DEVICE }
+ {
+ .virtual = SYSPLD_VIRT_BASE,
+ .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfe400000,
+ .pfn = __phys_to_pfn(0x10400000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
static void __init
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index e216ab8..0364ba4 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -259,10 +259,27 @@
}
static struct map_desc cl7500_io_desc[] __initdata = {
- { IO_BASE, IO_START, IO_SIZE, MT_DEVICE }, /* IO space */
- { ISA_BASE, ISA_START, ISA_SIZE, MT_DEVICE }, /* ISA space */
- { FLASH_BASE, FLASH_START, FLASH_SIZE, MT_DEVICE }, /* Flash */
- { LED_BASE, LED_START, LED_SIZE, MT_DEVICE } /* LED */
+ { /* IO space */
+ .virtual = IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, { /* ISA space */
+ .virtual = ISA_BASE,
+ .pfn = __phys_to_pfn(ISA_START),
+ .length = ISA_SIZE,
+ .type = MT_DEVICE
+ }, { /* Flash */
+ .virtual = FLASH_BASE,
+ .pfn = __phys_to_pfn(FLASH_START),
+ .length = FLASH_SIZE,
+ .type = MT_DEVICE
+ }, { /* LED */
+ .virtual = LED_BASE,
+ .pfn = __phys_to_pfn(LED_START),
+ .length = LED_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init clps7500_map_io(void)
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 5aeadfd..1526164 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -76,16 +76,42 @@
/*
* sparse external-decode ISAIO space
*/
- { IRQ_STAT, TRICK4_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_STAT/IRQ_MCLR */
- { IRQ_MASK, TRICK3_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_MASK/IRQ_MSET */
- { SOFT_BASE, TRICK1_PHYS, PGDIR_SIZE, MT_DEVICE }, /* SOFT_BASE */
- { PIT_BASE, TRICK0_PHYS, PGDIR_SIZE, MT_DEVICE }, /* PIT_BASE */
+ { /* IRQ_STAT/IRQ_MCLR */
+ .virtual = IRQ_STAT,
+ .pfn = __phys_to_pfn(TRICK4_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* IRQ_MASK/IRQ_MSET */
+ .virtual = IRQ_MASK,
+ .pfn = __phys_to_pfn(TRICK3_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* SOFT_BASE */
+ .virtual = SOFT_BASE,
+ .pfn = __phys_to_pfn(TRICK1_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* PIT_BASE */
+ .virtual = PIT_BASE,
+ .pfn = __phys_to_pfn(TRICK0_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ },
/*
* self-decode ISAIO space
*/
- { ISAIO_BASE, ISAIO_PHYS, ISAIO_SIZE, MT_DEVICE },
- { ISAMEM_BASE, ISAMEM_PHYS, ISAMEM_SIZE, MT_DEVICE }
+ {
+ .virtual = ISAIO_BASE,
+ .pfn = __phys_to_pfn(ISAIO_PHYS),
+ .length = ISAIO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = ISAMEM_BASE,
+ .pfn = __phys_to_pfn(ISAMEM_PHYS),
+ .length = ISAMEM_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init ebsa110_map_io(void)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index ef7eb5d..c648bfb 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,6 +24,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c
index 2aa57fa..e8832d0 100644
--- a/arch/arm/mach-epxa10db/mm.c
+++ b/arch/arm/mach-epxa10db/mm.c
@@ -31,12 +31,37 @@
/* Page table mapping for I/O region */
static struct map_desc epxa10db_io_desc[] __initdata = {
- { IO_ADDRESS(EXC_REGISTERS_BASE), EXC_REGISTERS_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK0_BASE), EXC_PLD_BLOCK0_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK1_BASE), EXC_PLD_BLOCK1_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK2_BASE), EXC_PLD_BLOCK2_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK3_BASE), EXC_PLD_BLOCK3_BASE, SZ_16K, MT_DEVICE },
- { FLASH_VADDR(EXC_EBI_BLOCK0_BASE), EXC_EBI_BLOCK0_BASE, SZ_16M, MT_DEVICE }
+ {
+ .virtual = IO_ADDRESS(EXC_REGISTERS_BASE),
+ .pfn = __phys_to_pfn(EXC_REGISTERS_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE),
+ .pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE),
+ .pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE),
+ .physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE),
+ .pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE),
+ .pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }
};
void __init epxa10db_map_io(void)
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eb8238c..dc09fd2 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -130,8 +130,17 @@
* it means that we have extra bullet protection on our feet.
*/
static struct map_desc fb_common_io_desc[] __initdata = {
- { ARMCSR_BASE, DC21285_ARMCSR_BASE, ARMCSR_SIZE, MT_DEVICE },
- { XBUS_BASE, 0x40000000, XBUS_SIZE, MT_DEVICE }
+ {
+ .virtual = ARMCSR_BASE,
+ .pfn = DC21285_ARMCSR_BASE,
+ .length = ARMCSR_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = XBUS_BASE,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = XBUS_SIZE,
+ .type = MT_DEVICE
+ }
};
/*
@@ -140,11 +149,32 @@
*/
static struct map_desc ebsa285_host_io_desc[] __initdata = {
#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
- { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE },
- { PCICFG0_BASE, DC21285_PCI_TYPE_0_CONFIG, PCICFG0_SIZE, MT_DEVICE },
- { PCICFG1_BASE, DC21285_PCI_TYPE_1_CONFIG, PCICFG1_SIZE, MT_DEVICE },
- { PCIIACK_BASE, DC21285_PCI_IACK, PCIIACK_SIZE, MT_DEVICE },
- { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE }
+ {
+ .virtual = PCIMEM_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_MEM),
+ .length = PCIMEM_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCICFG0_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
+ .length = PCICFG0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCICFG1_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
+ .length = PCICFG1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIIACK_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IACK),
+ .length = PCIIACK_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIO_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IO),
+ .length = PCIO_SIZE,
+ .type = MT_DEVICE
+ }
#endif
};
@@ -153,8 +183,17 @@
*/
static struct map_desc co285_io_desc[] __initdata = {
#ifdef CONFIG_ARCH_CO285
- { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE },
- { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE }
+ {
+ .virtual = PCIO_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IO),
+ .length = PCIO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIMEM_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_MEM),
+ .length = PCIMEM_SIZE,
+ .type = MT_DEVICE
+ }
#endif
};
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 5110e2e..c096b45 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -237,7 +237,12 @@
}
static struct map_desc h720x_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
};
/* Initialize io tables */
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index f8a742b..837d7f0 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -26,6 +26,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/string.h>
+
#include <asm/arch/imxfb.h>
#include <asm/hardware.h>
#include <asm/arch/imx-regs.h>
@@ -273,8 +275,12 @@
};
static struct map_desc imx_io_desc[] __initdata = {
- /* virtual physical length type */
- {IMX_IO_BASE, IMX_IO_PHYS, IMX_IO_SIZE, MT_DEVICE},
+ {
+ .virtual = IMX_IO_BASE,
+ .pfn = __phys_to_pfn(IMX_IO_PHYS),
+ .length = IMX_IO_SIZE,
+ .type = MT_DEVICE
+ }
};
void __init
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index a7511dd..4cbdc1f 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -61,13 +61,37 @@
}
static struct map_desc mx1ads_io_desc[] __initdata = {
- /* virtual physical length type */
- {IMX_CS0_VIRT, IMX_CS0_PHYS, IMX_CS0_SIZE, MT_DEVICE},
- {IMX_CS1_VIRT, IMX_CS1_PHYS, IMX_CS1_SIZE, MT_DEVICE},
- {IMX_CS2_VIRT, IMX_CS2_PHYS, IMX_CS2_SIZE, MT_DEVICE},
- {IMX_CS3_VIRT, IMX_CS3_PHYS, IMX_CS3_SIZE, MT_DEVICE},
- {IMX_CS4_VIRT, IMX_CS4_PHYS, IMX_CS4_SIZE, MT_DEVICE},
- {IMX_CS5_VIRT, IMX_CS5_PHYS, IMX_CS5_SIZE, MT_DEVICE},
+ {
+ .virtual = IMX_CS0_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS0_PHYS),
+ .length = IMX_CS0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS1_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS1_PHYS),
+ .length = IMX_CS1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS2_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS2_PHYS),
+ .length = IMX_CS2_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS3_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS3_PHYS),
+ .length = IMX_CS3_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS4_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS4_PHYS),
+ .length = IMX_CS4_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS5_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS5_PHYS),
+ .length = IMX_CS5_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c
index 5620059..73c3606 100644
--- a/arch/arm/mach-integrator/clock.c
+++ b/arch/arm/mach-integrator/clock.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/string.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 36e2b6e..764ceb4 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -30,6 +30,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/setup.h>
+#include <asm/param.h> /* HZ */
#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_kmi.h>
@@ -75,19 +76,72 @@
*/
static struct map_desc ap_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE },
- { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE },
- { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE },
- { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_64K, MT_DEVICE },
- { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE }
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_MEMORY_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_CONFIG_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_V3_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_IO_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ }
};
static void __init ap_map_io(void)
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2be5c03..aa34c58 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -74,17 +74,62 @@
*/
static struct map_desc intcp_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE },
- { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
- { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfca00000,
+ .pfn = __phys_to_pfn(0xca000000),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfcb00000,
+ .pfn = __phys_to_pfn(0xcb000000),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }
};
static void __init intcp_map_io(void)
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index c5f19d1..5b41e3a 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <asm/arch/lm.h>
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
index 0f921ba..bb50912 100644
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ b/arch/arm/mach-iop3xx/iop321-setup.c
@@ -38,13 +38,17 @@
* Standard IO mapping for all IOP321 based systems
*/
static struct map_desc iop321_std_desc[] __initdata = {
- /* virtual physical length type */
-
- /* mem mapped registers */
- { IOP321_VIRT_MEM_BASE, IOP321_PHYS_MEM_BASE, 0x00002000, MT_DEVICE },
-
- /* PCI IO space */
- { IOP321_PCI_LOWER_IO_VA, IOP321_PCI_LOWER_IO_PA, IOP321_PCI_IO_WINDOW_SIZE, MT_DEVICE }
+ { /* mem mapped registers */
+ .virtual = IOP321_VIRT_MEM_BASE,
+ .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE),
+ .length = 0x00002000,
+ .type = MT_DEVICE
+ }, { /* PCI IO space */
+ .virtual = IOP321_PCI_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA),
+ .length = IOP321_PCI_IO_WINDOW_SIZE,
+ .type = MT_DEVICE
+ }
};
#ifdef CONFIG_ARCH_IQ80321
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
index fc74b72..a2533c3 100644
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ b/arch/arm/mach-iop3xx/iop331-setup.c
@@ -37,13 +37,17 @@
* Standard IO mapping for all IOP331 based systems
*/
static struct map_desc iop331_std_desc[] __initdata = {
- /* virtual physical length type */
-
- /* mem mapped registers */
- { IOP331_VIRT_MEM_BASE, IOP331_PHYS_MEM_BASE, 0x00002000, MT_DEVICE },
-
- /* PCI IO space */
- { IOP331_PCI_LOWER_IO_VA, IOP331_PCI_LOWER_IO_PA, IOP331_PCI_IO_WINDOW_SIZE, MT_DEVICE }
+ { /* mem mapped registers */
+ .virtual = IOP331_VIRT_MEM_BASE,
+ .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE),
+ .length = 0x00002000,
+ .type = MT_DEVICE
+ }, { /* PCI IO space */
+ .virtual = IOP331_PCI_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA),
+ .length = IOP331_PCI_IO_WINDOW_SIZE,
+ .type = MT_DEVICE
+ }
};
static struct uart_port iop331_serial_ports[] = {
diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c
index 55992ab..e874b54 100644
--- a/arch/arm/mach-iop3xx/iq31244-mm.c
+++ b/arch/arm/mach-iop3xx/iq31244-mm.c
@@ -29,10 +29,12 @@
* We use RedBoot's setup for the onboard devices.
*/
static struct map_desc iq31244_io_desc[] __initdata = {
- /* virtual physical length type */
-
- /* on-board devices */
- { IQ31244_UART, IQ31244_UART, 0x00100000, MT_DEVICE }
+ { /* on-board devices */
+ .virtual = IQ31244_UART,
+ .pfn = __phys_to_pfn(IQ31244_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init iq31244_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c
index f997daa..c6a973b 100644
--- a/arch/arm/mach-iop3xx/iq31244-pci.c
+++ b/arch/arm/mach-iop3xx/iq31244-pci.c
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c
index bb3e9e5..d9cac5e 100644
--- a/arch/arm/mach-iop3xx/iq80321-mm.c
+++ b/arch/arm/mach-iop3xx/iq80321-mm.c
@@ -29,10 +29,12 @@
* We use RedBoot's setup for the onboard devices.
*/
static struct map_desc iq80321_io_desc[] __initdata = {
- /* virtual physical length type */
-
- /* on-board devices */
- { IQ80321_UART, IQ80321_UART, 0x00100000, MT_DEVICE }
+ { /* on-board devices */
+ .virtual = IQ80321_UART,
+ .pfn = __phys_to_pfn(IQ80321_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init iq80321_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c
index 79fea3d..802f6d0 100644
--- a/arch/arm/mach-iop3xx/iq80321-pci.c
+++ b/arch/arm/mach-iop3xx/iq80321-pci.c
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c
index f37a0e2..654e450a 100644
--- a/arch/arm/mach-iop3xx/iq80331-pci.c
+++ b/arch/arm/mach-iop3xx/iq80331-pci.c
@@ -13,6 +13,8 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c
index b9807aa..65951ff 100644
--- a/arch/arm/mach-iop3xx/iq80332-pci.c
+++ b/arch/arm/mach-iop3xx/iq80332-pci.c
@@ -13,6 +13,8 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index f4d7f1f..01c393c 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -83,42 +83,42 @@
static struct map_desc ixp2000_io_desc[] __initdata = {
{
.virtual = IXP2000_CAP_VIRT_BASE,
- .physical = IXP2000_CAP_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
.length = IXP2000_CAP_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_INTCTL_VIRT_BASE,
- .physical = IXP2000_INTCTL_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
.length = IXP2000_INTCTL_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CREG_VIRT_BASE,
- .physical = IXP2000_PCI_CREG_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
.length = IXP2000_PCI_CREG_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CSR_VIRT_BASE,
- .physical = IXP2000_PCI_CSR_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
.length = IXP2000_PCI_CSR_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_MSF_VIRT_BASE,
- .physical = IXP2000_MSF_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
.length = IXP2000_MSF_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_IO_VIRT_BASE,
- .physical = IXP2000_PCI_IO_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
.length = IXP2000_PCI_IO_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CFG0_VIRT_BASE,
- .physical = IXP2000_PCI_CFG0_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
.length = IXP2000_PCI_CFG0_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CFG1_VIRT_BASE,
- .physical = IXP2000_PCI_CFG1_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
.length = IXP2000_PCI_CFG1_SIZE,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 63ba019..8b4a839 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -176,7 +176,7 @@
*************************************************************************/
static struct map_desc ixdp2x00_io_desc __initdata = {
.virtual = IXDP2X00_VIRT_CPLD_BASE,
- .physical = IXDP2X00_PHYS_CPLD_BASE,
+ .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
.length = IXDP2X00_CPLD_SIZE,
.type = MT_DEVICE
};
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 7a51099..fee1d7b 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -136,7 +136,7 @@
*************************************************************************/
static struct map_desc ixdp2x01_io_desc __initdata = {
.virtual = IXDP2X01_VIRT_CPLD_BASE,
- .physical = IXDP2X01_PHYS_CPLD_BASE,
+ .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
.length = IXDP2X01_CPLD_REGION_SIZE,
.type = MT_DEVICE
};
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 36b6045..6c39644 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -44,24 +44,24 @@
static struct map_desc ixp4xx_io_desc[] __initdata = {
{ /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
.virtual = IXP4XX_PERIPHERAL_BASE_VIRT,
- .physical = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
.length = IXP4XX_PERIPHERAL_REGION_SIZE,
.type = MT_DEVICE
}, { /* Expansion Bus Config Registers */
.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
- .physical = IXP4XX_EXP_CFG_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
.length = IXP4XX_EXP_CFG_REGION_SIZE,
.type = MT_DEVICE
}, { /* PCI Registers */
.virtual = IXP4XX_PCI_CFG_BASE_VIRT,
- .physical = IXP4XX_PCI_CFG_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
.length = IXP4XX_PCI_CFG_REGION_SIZE,
.type = MT_DEVICE
},
#ifdef CONFIG_DEBUG_LL
{ /* Debug UART mapping */
.virtual = IXP4XX_DEBUG_UART_BASE_VIRT,
- .physical = IXP4XX_DEBUG_UART_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
.length = IXP4XX_DEBUG_UART_REGION_SIZE,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index cb3dcd3..19f2fa2 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -26,8 +26,17 @@
/* This function calls the board specific IRQ initialization function. */
static struct map_desc kev7a400_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
- { CPLD_VIRT, CPLD_PHYS, CPLD_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD_VIRT,
+ .pfn = __phys_to_pfn(CPLD_PHYS),
+ .length = CPLD_SIZE,
+ .type = MT_DEVICE
+ }
};
void __init kev7a400_map_io(void)
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 6eb61a1..a20eabc 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -227,23 +227,79 @@
}
static struct map_desc lpd7a400_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
- /* Mapping added to work around chip select problems */
- { IOBARRIER_VIRT, IOBARRIER_PHYS, IOBARRIER_SIZE, MT_DEVICE },
- { CF_VIRT, CF_PHYS, CF_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, { /* Mapping added to work around chip select problems */
+ .virtual = IOBARRIER_VIRT,
+ .pfn = __phys_to_pfn(IOBARRIER_PHYS),
+ .length = IOBARRIER_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CF_VIRT,
+ .pfn = __phys_to_pfn(CF_PHYS),
+ .length = CF_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD02_VIRT,
+ .pfn = __phys_to_pfn(CPLD02_PHYS),
+ .length = CPLD02_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD06_VIRT,
+ .pfn = __phys_to_pfn(CPLD06_PHYS),
+ .length = CPLD06_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD08_VIRT,
+ .pfn = __phys_to_pfn(CPLD08_PHYS),
+ .length = CPLD08_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD0C_VIRT,
+ .pfn = __phys_to_pfn(CPLD0C_PHYS),
+ .length = CPLD0C_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD0E_VIRT,
+ .pfn = __phys_to_pfn(CPLD0E_PHYS),
+ .length = CPLD0E_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD10_VIRT,
+ .pfn = __phys_to_pfn(CPLD10_PHYS),
+ .length = CPLD10_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD12_VIRT,
+ .pfn = __phys_to_pfn(CPLD12_PHYS),
+ .length = CPLD12_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD14_VIRT,
+ .pfn = __phys_to_pfn(CPLD14_PHYS),
+ .length = CPLD14_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD16_VIRT,
+ .pfn = __phys_to_pfn(CPLD16_PHYS),
+ .length = CPLD16_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD18_VIRT,
+ .pfn = __phys_to_pfn(CPLD18_PHYS),
+ .length = CPLD18_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD1A_VIRT,
+ .pfn = __phys_to_pfn(CPLD1A_PHYS),
+ .length = CPLD1A_SIZE,
+ .type = MT_DEVICE
+ },
/* This mapping is redundant since the smc driver performs another. */
/* { CPLD00_VIRT, CPLD00_PHYS, CPLD00_SIZE, MT_DEVICE }, */
- { CPLD02_VIRT, CPLD02_PHYS, CPLD02_SIZE, MT_DEVICE },
- { CPLD06_VIRT, CPLD06_PHYS, CPLD06_SIZE, MT_DEVICE },
- { CPLD08_VIRT, CPLD08_PHYS, CPLD08_SIZE, MT_DEVICE },
- { CPLD0C_VIRT, CPLD0C_PHYS, CPLD0C_SIZE, MT_DEVICE },
- { CPLD0E_VIRT, CPLD0E_PHYS, CPLD0E_SIZE, MT_DEVICE },
- { CPLD10_VIRT, CPLD10_PHYS, CPLD10_SIZE, MT_DEVICE },
- { CPLD12_VIRT, CPLD12_PHYS, CPLD12_SIZE, MT_DEVICE },
- { CPLD14_VIRT, CPLD14_PHYS, CPLD14_SIZE, MT_DEVICE },
- { CPLD16_VIRT, CPLD16_PHYS, CPLD16_SIZE, MT_DEVICE },
- { CPLD18_VIRT, CPLD18_PHYS, CPLD18_SIZE, MT_DEVICE },
- { CPLD1A_VIRT, CPLD1A_PHYS, CPLD1A_SIZE, MT_DEVICE },
};
void __init
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index df0312b..fd9183f 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -103,8 +103,12 @@
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
-{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
- MT_DEVICE },
+ {
+ .virtual = OMAP1510_FPGA_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_FPGA_START),
+ .length = OMAP1510_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
};
static struct resource innovator1510_smc91x_resources[] = {
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 107c68c..2ba26e2 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -134,8 +134,12 @@
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
- {H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
- MT_DEVICE},
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init omap_perseus2_map_io(void)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index eb8261d..79fb865 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -26,27 +26,59 @@
* default mapping provided here.
*/
static struct map_desc omap_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }
};
#ifdef CONFIG_ARCH_OMAP730
static struct map_desc omap730_io_desc[] __initdata = {
- { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE },
- { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP730_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP730_DSP_START),
+ .length = OMAP730_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP730_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP730_DSPREG_START),
+ .length = OMAP730_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
#ifdef CONFIG_ARCH_OMAP1510
static struct map_desc omap1510_io_desc[] __initdata = {
- { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE },
- { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP1510_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_DSP_START),
+ .length = OMAP1510_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP1510_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_DSPREG_START),
+ .length = OMAP1510_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
static struct map_desc omap16xx_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP16XX_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP16XX_DSP_START),
+ .length = OMAP16XX_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP16XX_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP16XX_DSPREG_START),
+ .length = OMAP16XX_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 60c8b9d..656f73b 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -33,6 +33,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
+#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/corgi.h>
@@ -224,6 +225,22 @@
};
+/*
+ * Irda
+ */
+static void corgi_irda_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF)
+ GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+ else
+ GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+}
+
+static struct pxaficp_platform_data corgi_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = corgi_irda_transceiver_mode,
+};
+
/*
* USB Device Controller
@@ -269,10 +286,13 @@
corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
+ pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
+ pxa_set_ficp_info(&corgi_ficp_platform_data);
scoop_num = 1;
scoop_devs = &corgi_pcmcia_scoop[0];
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 0ef4282..136c269 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -222,24 +222,22 @@
return 0;
}
-static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgi_ssp_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- ssp_flush(&corgi_ssp_dev);
- ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
- }
+ ssp_flush(&corgi_ssp_dev);
+ ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
+
return 0;
}
-static int corgi_ssp_resume(struct device *dev, u32 level)
+static int corgi_ssp_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
- GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
- ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
- ssp_enable(&corgi_ssp_dev);
- }
+ GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
+ GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+ ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
+ ssp_enable(&corgi_ssp_dev);
+
return 0;
}
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 1d767766..9c02893 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -23,6 +23,7 @@
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/pm.h>
+#include <linux/string.h>
#include <asm/hardware.h>
#include <asm/irq.h>
@@ -34,6 +35,7 @@
#include <asm/arch/udc.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
#include <asm/arch/i2c.h>
#include "generic.h"
@@ -92,14 +94,42 @@
* and cache flush area.
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf2000000, 0x40000000, 0x02000000, MT_DEVICE }, /* Devs */
- { 0xf4000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */
- { 0xf6000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */
- { 0xf8000000, 0x4c000000, 0x00100000, MT_DEVICE }, /* USB host */
- { 0xfa000000, 0x50000000, 0x00100000, MT_DEVICE }, /* Camera */
- { 0xfe000000, 0x58000000, 0x00100000, MT_DEVICE }, /* IMem ctl */
- { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE } /* UNCACHED_PHYS_0 */
+ { /* Devs */
+ .virtual = 0xf2000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }, { /* LCD */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x44000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Mem Ctl */
+ .virtual = 0xf6000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* USB host */
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0x4c000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Camera */
+ .virtual = 0xfa000000,
+ .pfn = __phys_to_pfn(0x50000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* IMem ctl */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0x58000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* UNCACHED_PHYS_0 */
+ .virtual = 0xff000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init pxa_map_io(void)
@@ -225,6 +255,10 @@
.name = "pxa2xx-uart",
.id = 2,
};
+static struct platform_device hwuart_device = {
+ .name = "pxa2xx-uart",
+ .id = 3,
+};
static struct resource i2c_resources[] = {
{
@@ -265,10 +299,26 @@
static struct platform_device i2s_device = {
.name = "pxa2xx-i2s",
.id = -1,
- .resource = i2c_resources,
+ .resource = i2s_resources,
.num_resources = ARRAY_SIZE(i2s_resources),
};
+static u64 pxaficp_dmamask = ~(u32)0;
+
+static struct platform_device pxaficp_device = {
+ .name = "pxa2xx-ir",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxaficp_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+ pxaficp_device.dev.platform_data = info;
+}
+
static struct platform_device *devices[] __initdata = {
&pxamci_device,
&udc_device,
@@ -276,13 +326,26 @@
&ffuart_device,
&btuart_device,
&stuart_device,
+ &pxaficp_device,
&i2c_device,
&i2s_device,
};
static int __init pxa_init(void)
{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
+ int cpuid, ret;
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret)
+ return ret;
+
+ /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+ cpuid = read_cpuid(CPUID_ID);
+ if (((cpuid >> 4) & 0xfff) == 0x2d0 ||
+ ((cpuid >> 4) & 0xfff) == 0x290)
+ ret = platform_device_register(&hwuart_device);
+
+ return ret;
}
subsys_initcall(pxa_init);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 386e107..01a83ab 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -152,16 +152,17 @@
}
static struct map_desc idp_io_desc[] __initdata = {
- /* virtual physical length type */
-
- { IDP_COREVOLT_VIRT,
- IDP_COREVOLT_PHYS,
- IDP_COREVOLT_SIZE,
- MT_DEVICE },
- { IDP_CPLD_VIRT,
- IDP_CPLD_PHYS,
- IDP_CPLD_SIZE,
- MT_DEVICE }
+ {
+ .virtual = IDP_COREVOLT_VIRT,
+ .pfn = __phys_to_pfn(IDP_COREVOLT_PHYS),
+ .length = IDP_COREVOLT_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IDP_CPLD_VIRT,
+ .pfn = __phys_to_pfn(IDP_CPLD_PHYS),
+ .length = IDP_CPLD_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init idp_map_io(void)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1f38033..beccf45 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -35,6 +35,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/lubbock.h>
#include <asm/arch/udc.h>
+#include <asm/arch/irda.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/mmc.h>
@@ -237,16 +238,40 @@
.init = lubbock_mci_init,
};
+static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ LUB_MISC_WR &= ~(1 << 4);
+ } else if (mode & IR_FIRMODE) {
+ LUB_MISC_WR |= 1 << 4;
+ }
+ local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data lubbock_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
+ .transceiver_mode = lubbock_irda_transceiver_mode,
+};
+
static void __init lubbock_init(void)
{
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
+ pxa_set_ficp_info(&lubbock_ficp_platform_data);
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
}
static struct map_desc lubbock_io_desc[] __initdata = {
- { LUBBOCK_FPGA_VIRT, LUBBOCK_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+ { /* CPLD */
+ .virtual = LUBBOCK_FPGA_VIRT,
+ .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init lubbock_map_io(void)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 85fdb5b..a48c640 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -37,6 +37,7 @@
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
#include "generic.h"
@@ -294,6 +295,29 @@
.exit = mainstone_mci_exit,
};
+static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
+ } else if (mode & IR_FIRMODE) {
+ MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
+ }
+ if (mode & IR_OFF) {
+ MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
+ } else {
+ MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
+ }
+ local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data mainstone_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = mainstone_irda_transceiver_mode,
+};
+
static void __init mainstone_init(void)
{
/*
@@ -313,11 +337,17 @@
set_pxa_fb_info(&toshiba_ltm035a776c);
pxa_set_mci_info(&mainstone_mci_platform_data);
+ pxa_set_ficp_info(&mainstone_ficp_platform_data);
}
static struct map_desc mainstone_io_desc[] __initdata = {
- { MST_FPGA_VIRT, MST_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+ { /* CPLD */
+ .virtual = MST_FPGA_VIRT,
+ .pfn = __phys_to_pfn(MST_FPGA_PHYS),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init mainstone_map_io(void)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f256388..6d413f6 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -32,6 +32,7 @@
#include <asm/arch/irq.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
+#include <asm/arch/irda.h>
#include <asm/arch/poodle.h>
#include <asm/arch/pxafb.h>
@@ -152,6 +153,24 @@
/*
+ * Irda
+ */
+static void poodle_irda_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF) {
+ GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
+ } else {
+ GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
+ }
+}
+
+static struct pxaficp_platform_data poodle_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = poodle_irda_transceiver_mode,
+};
+
+
+/*
* USB Device Controller
*/
static void poodle_udc_command(int cmd)
@@ -244,8 +263,10 @@
set_pxa_fb_info(&poodle_fb_info);
pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
+ pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
+ pxa_set_ficp_info(&poodle_ficp_platform_data);
scoop_num = 1;
scoop_devs = &poodle_pcmcia_scoop[0];
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 7869c3b..573a575 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -129,7 +129,7 @@
case PM_SUSPEND_MEM:
/* set resume return address */
PSPR = virt_to_phys(pxa_cpu_resume);
- pxa_cpu_suspend(3);
+ pxa_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9a791b0..09a5d59 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -157,7 +157,7 @@
case PM_SUSPEND_MEM:
/* set resume return address */
PSPR = virt_to_phys(pxa_cpu_resume);
- pxa_cpu_suspend(3);
+ pxa_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 5786cca..c986268 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -28,7 +28,9 @@
/*
* pxa_cpu_suspend()
*
- * Forces CPU into sleep state
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
*/
ENTRY(pxa_cpu_suspend)
@@ -53,6 +55,7 @@
mov r10, sp
stmfd sp!, {r3 - r10}
+ mov r5, r0 @ save sleep mode
@ preserve phys address of stack
mov r0, sp
bl sleep_phys_sp
@@ -66,7 +69,7 @@
@ (also workaround for sighting 28071)
@ prepare value for sleep mode
- mov r1, #3 @ sleep mode
+ mov r1, r5 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d0ab428..b838842 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -34,6 +34,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
+#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/pxafb.h>
@@ -277,6 +278,23 @@
/*
+ * Irda
+ */
+static void spitz_irda_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF)
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+ else
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+}
+
+static struct pxaficp_platform_data spitz_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = spitz_irda_transceiver_mode,
+};
+
+
+/*
* Spitz PXA Framebuffer
*/
static struct pxafb_mach_info spitz_pxafb_info __initdata = {
@@ -326,6 +344,7 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_mci_info(&spitz_mci_platform_data);
+ pxa_set_ficp_info(&spitz_ficp_platform_data);
set_pxa_fb_parent(&spitzssp_device.dev);
set_pxa_fb_info(&spitz_pxafb_info);
}
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 8a3f27b..6f6dbbd 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -21,7 +21,7 @@
ENTRY(pxa_cpu_standby)
ldr r0, =PSSR
mov r1, #(PSSR_PH | PSSR_STS)
- mov r2, #2
+ mov r2, #PWRMODE_STANDBY
mov r3, #UNCACHED_PHYS_0 @ Read mem context in.
ldr ip, [r3]
b 1f
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index e3587ef..5c4ac1c 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -61,9 +61,22 @@
__tagtable(ATAG_ACORN, parse_tag_acorn);
static struct map_desc rpc_io_desc[] __initdata = {
- { SCREEN_BASE, SCREEN_START, 2*1048576, MT_DEVICE }, /* VRAM */
- { (u32)IO_BASE, IO_START, IO_SIZE , MT_DEVICE }, /* IO space */
- { EASI_BASE, EASI_START, EASI_SIZE, MT_DEVICE } /* EASI space */
+ { /* VRAM */
+ .virtual = SCREEN_BASE,
+ .pfn = __phys_to_pfn(SCREEN_START),
+ .length = 2*1048576,
+ .type = MT_DEVICE
+ }, { /* IO space */
+ .virtual = (u32)IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE ,
+ .type = MT_DEVICE
+ }, { /* EASI space */
+ .virtual = EASI_BASE,
+ .pfn = __phys_to_pfn(EASI_START),
+ .length = EASI_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init rpc_map_io(void)
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
index 478c15c..9cbe5ee 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/arch/arm/mach-s3c2410/cpu.h
@@ -21,7 +21,7 @@
/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, S3C2410_PA_##x, S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
#define MHZ (1000*1000)
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 0077937..08bc7d9 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -47,7 +47,7 @@
static struct resource s3c_usb_resource[] = {
[0] = {
.start = S3C2410_PA_USBHOST,
- .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST,
+ .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -77,7 +77,7 @@
static struct resource s3c_lcd_resource[] = {
[0] = {
.start = S3C2410_PA_LCD,
- .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD,
+ .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -103,21 +103,25 @@
EXPORT_SYMBOL(s3c_device_lcd);
-static struct s3c2410fb_mach_info s3c2410fb_info;
-
-void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info)
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
{
- memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info));
- s3c_device_lcd.dev.platform_data = &s3c2410fb_info;
+ struct s3c2410fb_mach_info *npd;
+
+ npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+ if (npd) {
+ memcpy(npd, pd, sizeof(*npd));
+ s3c_device_lcd.dev.platform_data = npd;
+ } else {
+ printk(KERN_ERR "no memory for LCD platform data\n");
+ }
}
-EXPORT_SYMBOL(set_s3c2410fb_info);
/* NAND Controller */
static struct resource s3c_nand_resource[] = {
[0] = {
.start = S3C2410_PA_NAND,
- .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND,
+ .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -136,7 +140,7 @@
static struct resource s3c_usbgadget_resource[] = {
[0] = {
.start = S3C2410_PA_USBDEV,
- .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV,
+ .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -161,7 +165,7 @@
static struct resource s3c_wdt_resource[] = {
[0] = {
.start = S3C2410_PA_WATCHDOG,
- .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG,
+ .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -186,7 +190,7 @@
static struct resource s3c_i2c_resource[] = {
[0] = {
.start = S3C2410_PA_IIC,
- .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC,
+ .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -211,7 +215,7 @@
static struct resource s3c_iis_resource[] = {
[0] = {
.start = S3C2410_PA_IIS,
- .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS,
+ .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
.flags = IORESOURCE_MEM,
}
};
@@ -265,7 +269,7 @@
static struct resource s3c_adc_resource[] = {
[0] = {
.start = S3C2410_PA_ADC,
- .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC,
+ .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -288,7 +292,7 @@
static struct resource s3c_sdi_resource[] = {
[0] = {
.start = S3C2410_PA_SDI,
- .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI,
+ .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -465,7 +469,7 @@
static struct resource s3c_camif_resource[] = {
[0] = {
.start = S3C2440_PA_CAMIF,
- .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF,
+ .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 94f1776..23ea3d5 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -30,6 +30,7 @@
* 04-Oct-2004 BJD Added irq filter controls for GPIO
* 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code
* 13-Mar-2005 BJD Updates for __iomem
+ * 26-Oct-2005 BJD Added generic configuration types
*/
@@ -58,6 +59,27 @@
mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
}
+ switch (function) {
+ case S3C2410_GPIO_LEAVE:
+ mask = 0;
+ function = 0;
+ break;
+
+ case S3C2410_GPIO_INPUT:
+ case S3C2410_GPIO_OUTPUT:
+ case S3C2410_GPIO_SFN2:
+ case S3C2410_GPIO_SFN3:
+ if (pin < S3C2410_GPIO_BANKB) {
+ function &= 1;
+ function <<= S3C2410_GPIO_OFFSET(pin);
+ } else {
+ function &= 3;
+ function <<= S3C2410_GPIO_OFFSET(pin)*2;
+ }
+ }
+
+ /* modify the specified register wwith IRQs off */
+
local_irq_save(flags);
con = __raw_readl(base + 0x00);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 7b51bfd..c1b5c63 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -32,6 +32,7 @@
* 25-Jul-2005 BJD Removed ASIX static mappings
* 27-Jul-2005 BJD Ensure maximum frequency of i2c bus
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Added FB platform data
*/
#include <linux/kernel.h>
@@ -61,8 +62,10 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
+
#include <asm/arch/nand.h>
#include <asm/arch/iic.h>
+#include <asm/arch/fb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -399,6 +402,38 @@
.max_freq = 130*1000,
};
+
+static struct s3c2410fb_mach_info __initdata bast_lcd_info = {
+ .width = 640,
+ .height = 480,
+
+ .xres = {
+ .min = 320,
+ .max = 1024,
+ .defval = 640,
+ },
+
+ .yres = {
+ .min = 240,
+ .max = 600,
+ .defval = 480,
+ },
+
+ .bpp = {
+ .min = 4,
+ .max = 16,
+ .defval = 8,
+ },
+
+ .regs = {
+ .lcdcon1 = 0x00000176,
+ .lcdcon2 = 0x1d77c7c2,
+ .lcdcon3 = 0x013a7f13,
+ .lcdcon4 = 0x00000057,
+ .lcdcon5 = 0x00014b02,
+ }
+};
+
/* Standard BAST devices */
static struct platform_device *bast_devices[] __initdata = {
@@ -454,6 +489,10 @@
usb_simtec_init();
}
+static void __init bast_init(void)
+{
+ s3c24xx_fb_set_platdata(&bast_lcd_info);
+}
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
@@ -463,5 +502,6 @@
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
+ .init_machine = bast_init,
.timer = &s3c24xx_timer,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index fb3cb01..7efeaaa 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,6 +25,7 @@
* 14-Jan-2005 BJD Added clock init
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Changed name of fb init call
*/
#include <linux/kernel.h>
@@ -164,7 +165,7 @@
static void __init h1940_init(void)
{
- set_s3c2410fb_info(&h1940_lcdcfg);
+ s3c24xx_fb_set_platdata(&h1940_lcdcfg);
}
MACHINE_START(H1940, "IPAQ-H1940")
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index 722ef46..6950e61 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -19,6 +19,7 @@
* 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA
* 14-Mar-2005 BJD void __iomem fixes
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Added framebuffer data
*/
#include <linux/kernel.h>
@@ -41,7 +42,10 @@
//#include <asm/debug-ll.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
#include "s3c2410.h"
#include "s3c2440.h"
@@ -86,6 +90,70 @@
}
};
+/* LCD driver info */
+
+static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x04),
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(7) |
+ S3C2410_LCDCON2_LINEVAL(319) |
+ S3C2410_LCDCON2_VFPD(6) |
+ S3C2410_LCDCON2_VSPW(3),
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(19) |
+ S3C2410_LCDCON3_HOZVAL(239) |
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 240,
+ .height = 320,
+
+ .xres = {
+ .min = 240,
+ .max = 240,
+ .defval = 240,
+ },
+
+ .yres = {
+ .min = 320,
+ .max = 320,
+ .defval = 320,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
static struct platform_device *smdk2440_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
@@ -121,6 +189,8 @@
s3c2410_gpio_setpin(S3C2410_GPF6, 0);
s3c2410_gpio_setpin(S3C2410_GPF7, 0);
+ s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
+
s3c2410_pm_init();
}
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 24687f5..75efb5d 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -388,9 +388,17 @@
};
static struct map_desc assabet_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf1000000, 0x12000000, 0x00100000, MT_DEVICE }, /* Board Control Register */
- { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE } /* MQ200 */
+ { /* Board Control Register */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x12000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* MQ200 */
+ .virtual = 0xf2800000,
+ .pfn = __phys_to_pfn(0x4b800000),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }
};
static void __init assabet_map_io(void)
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b6169cb..c92cebf 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -254,10 +254,22 @@
static struct map_desc badge4_io_desc[] __initdata = {
- /* virtual physical length type */
- {0xf1000000, 0x08000000, 0x00100000, MT_DEVICE },/* SRAM bank 1 */
- {0xf2000000, 0x10000000, 0x00100000, MT_DEVICE },/* SRAM bank 2 */
- {0xf4000000, 0x48000000, 0x00100000, MT_DEVICE } /* SA-1111 */
+ { /* SRAM bank 1 */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SRAM bank 2 */
+ .virtual = 0xf2000000,
+ .pfn = __phys_to_pfn(0x10000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 9484be7..23cb748 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -100,8 +100,12 @@
}
static struct map_desc cerf_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf0000000, 0x08000000, 0x00100000, MT_DEVICE } /* Crystal Ethernet Chip */
+ { /* Crystal Ethernet Chip */
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init cerf_map_io(void)
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6ecab7e..7fd6e29 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -171,9 +171,17 @@
}
static struct map_desc collie_io_desc[] __initdata = {
- /* virtual physical length type */
- {0xe8000000, 0x00000000, 0x02000000, MT_DEVICE}, /* 32M main flash (cs0) */
- {0xea000000, 0x08000000, 0x02000000, MT_DEVICE}, /* 32M boot flash (cs1) */
+ { /* 32M main flash (cs0) */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }, { /* 32M boot flash (cs1) */
+ .virtual = 0xea000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }
};
static void __init collie_map_io(void)
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 3f1e358..83eba8b 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -17,12 +17,14 @@
#include <linux/pm.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
+#include <linux/sched.h> /* just for sched_clock() - funny that */
#include <asm/div64.h>
#include <asm/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
#include <asm/irq.h>
#include "generic.h"
@@ -283,6 +285,7 @@
void sa11x0_set_flash_data(struct flash_platform_data *flash,
struct resource *res, int nr)
{
+ flash->name = "sa1100";
sa11x0mtd_device.dev.platform_data = flash;
sa11x0mtd_device.resource = res;
sa11x0mtd_device.num_resources = nr;
@@ -369,11 +372,27 @@
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf8000000, 0x80000000, 0x00100000, MT_DEVICE }, /* PCM */
- { 0xfa000000, 0x90000000, 0x00100000, MT_DEVICE }, /* SCM */
- { 0xfc000000, 0xa0000000, 0x00100000, MT_DEVICE }, /* MER */
- { 0xfe000000, 0xb0000000, 0x00200000, MT_DEVICE } /* LCD + DMA */
+ { /* PCM */
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0x80000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SCM */
+ .virtual = 0xfa000000,
+ .pfn = __phys_to_pfn(0x90000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* MER */
+ .virtual = 0xfc000000,
+ .pfn = __phys_to_pfn(0xa0000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* LCD + DMA */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0xb0000000),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ },
};
void __init sa1100_map_io(void)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index e7aa2681..e8352b7 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -223,10 +223,22 @@
}
static struct map_desc h3600_io_desc[] __initdata = {
- /* virtual physical length type */
- { H3600_BANK_2_VIRT, SA1100_CS2_PHYS, 0x02800000, MT_DEVICE }, /* static memory bank 2 CS#2 */
- { H3600_BANK_4_VIRT, SA1100_CS4_PHYS, 0x00800000, MT_DEVICE }, /* static memory bank 4 CS#4 */
- { H3600_EGPIO_VIRT, H3600_EGPIO_PHYS, 0x01000000, MT_DEVICE }, /* EGPIO 0 CS#5 */
+ { /* static memory bank 2 CS#2 */
+ .virtual = H3600_BANK_2_VIRT,
+ .pfn = __phys_to_pfn(SA1100_CS2_PHYS),
+ .length = 0x02800000,
+ .type = MT_DEVICE
+ }, { /* static memory bank 4 CS#4 */
+ .virtual = H3600_BANK_4_VIRT,
+ .pfn = __phys_to_pfn(SA1100_CS4_PHYS),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }, { /* EGPIO 0 CS#5 */
+ .virtual = H3600_EGPIO_VIRT,
+ .pfn = __phys_to_pfn(H3600_EGPIO_PHYS),
+ .length = 0x01000000,
+ .type = MT_DEVICE
+ }
};
/*
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 502d65c..c922e04 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -57,8 +57,12 @@
*/
static struct map_desc hackkit_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xe8000000, 0x00000000, 0x01000000, MT_DEVICE } /* Flash bank 0 */
+ { /* Flash bank 0 */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x01000000,
+ .type = MT_DEVICE
+ },
};
static struct sa1100_port_fns hackkit_port_fns __initdata = {
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 2f49711..89af0c8 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -8,6 +8,8 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <asm/hardware.h>
#include <asm/hardware/sa1111.h>
@@ -16,6 +18,7 @@
#include <asm/setup.h>
#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
@@ -81,10 +84,22 @@
arch_initcall(jornada720_init);
static struct map_desc jornada720_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf0000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Epson registers */
- { 0xf1000000, 0x48200000, 0x00100000, MT_DEVICE }, /* Epson frame buffer */
- { 0xf4000000, 0x40000000, 0x00100000, MT_DEVICE } /* SA-1111 */
+ { /* Epson registers */
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Epson frame buffer */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x48200000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init jornada720_map_io(void)
@@ -96,6 +111,66 @@
sa1100_register_uart(1, 1);
}
+static struct mtd_partition jornada720_partitions[] = {
+ {
+ .name = "JORNADA720 boot firmware",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "JORNADA720 kernel",
+ .size = 0x000c0000,
+ .offset = 0x00040000,
+ }, {
+ .name = "JORNADA720 params",
+ .size = 0x00040000,
+ .offset = 0x00100000,
+ }, {
+ .name = "JORNADA720 initrd",
+ .size = 0x00100000,
+ .offset = 0x00140000,
+ }, {
+ .name = "JORNADA720 root cramfs",
+ .size = 0x00300000,
+ .offset = 0x00240000,
+ }, {
+ .name = "JORNADA720 usr cramfs",
+ .size = 0x00800000,
+ .offset = 0x00540000,
+ }, {
+ .name = "JORNADA720 usr local",
+ .size = 0, /* will expand to the end of the flash */
+ .offset = 0x00d00000,
+ }
+};
+
+static void jornada720_set_vpp(int vpp)
+{
+ if (vpp)
+ PPSR |= 0x80;
+ else
+ PPSR &= ~0x80;
+ PPDR |= 0x80;
+}
+
+static struct flash_platform_data jornada720_flash_data = {
+ .map_name = "cfi_probe",
+ .set_vpp = jornada720_set_vpp,
+ .parts = jornada720_partitions,
+ .nr_parts = ARRAY_SIZE(jornada720_partitions),
+};
+
+static struct resource jornada720_flash_resource = {
+ .start = SA1100_CS0_PHYS,
+ .end = SA1100_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static void __init jornada720_mach_init(void)
+{
+ sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+}
+
MACHINE_START(JORNADA720, "HP Jornada 720")
/* Maintainer: Michael Gernoth <michael@gernoth.net> */
.phys_ram = 0xc0000000,
@@ -105,4 +180,5 @@
.map_io = jornada720_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
+ .init_machine = jornada720_mach_init,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index ed6744d..8c9e3dd 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -31,9 +31,17 @@
}
static struct map_desc lart_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */
- { 0xec000000, 0x08000000, 0x00400000, MT_DEVICE } /* main flash, alternative location */
+ { /* main flash memory */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x00400000,
+ .type = MT_DEVICE
+ }, { /* main flash, alternative location */
+ .virtual = 0xec000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00400000,
+ .type = MT_DEVICE
+ }
};
static void __init lart_map_io(void)
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index fc06164..052e4ca 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -178,33 +178,27 @@
/*
* LDM power management.
*/
-static int neponset_suspend(struct device *dev, pm_message_t state, u32 level)
+static int neponset_suspend(struct device *dev, pm_message_t state)
{
/*
* Save state.
*/
- if (level == SUSPEND_SAVE_STATE ||
- level == SUSPEND_DISABLE ||
- level == SUSPEND_POWER_DOWN) {
- if (!dev->power.saved_state)
- dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
- if (!dev->power.saved_state)
- return -ENOMEM;
+ if (!dev->power.saved_state)
+ dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+ if (!dev->power.saved_state)
+ return -ENOMEM;
- *(unsigned int *)dev->power.saved_state = NCR_0;
- }
+ *(unsigned int *)dev->power.saved_state = NCR_0;
return 0;
}
-static int neponset_resume(struct device *dev, u32 level)
+static int neponset_resume(struct device *dev)
{
- if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) {
- if (dev->power.saved_state) {
- NCR_0 = *(unsigned int *)dev->power.saved_state;
- kfree(dev->power.saved_state);
- dev->power.saved_state = NULL;
- }
+ if (dev->power.saved_state) {
+ NCR_0 = *(unsigned int *)dev->power.saved_state;
+ kfree(dev->power.saved_state);
+ dev->power.saved_state = NULL;
}
return 0;
@@ -331,9 +325,17 @@
subsys_initcall(neponset_init);
static struct map_desc neponset_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf3000000, 0x10000000, SZ_1M, MT_DEVICE }, /* System Registers */
- { 0xf4000000, 0x40000000, SZ_1M, MT_DEVICE } /* SA-1111 */
+ { /* System Registers */
+ .virtual = 0xf3000000,
+ .pfn = __phys_to_pfn(0x10000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init neponset_map_io(void)
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 07f6d5f..cfb6658 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -60,11 +60,17 @@
EXPORT_SYMBOL(clear_cs3_bit);
static struct map_desc simpad_io_desc[] __initdata = {
- /* virtual physical length type */
- /* MQ200 */
- { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE },
- /* Paules CS3, write only */
- { 0xf1000000, 0x18000000, 0x00100000, MT_DEVICE },
+ { /* MQ200 */
+ .virtual = 0xf2800000,
+ .pfn = __phys_to_pfn(0x4b800000),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }, { /* Paules CS3, write only */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x18000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
};
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 946c0d1..2d428b6 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -62,7 +62,12 @@
extern void shark_init_irq(void);
static struct map_desc shark_io_desc[] __initdata = {
- { IO_BASE , IO_START , IO_SIZE , MT_DEVICE }
+ {
+ .virtual = IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init shark_map_io(void)
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
index 48025c2..b96a2ea 100644
--- a/arch/arm/mach-versatile/clock.c
+++ b/arch/arm/mach-versatile/clock.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/string.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a30e045..7e4bdd0 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -186,25 +186,82 @@
}
static struct map_desc versatile_io_desc[] __initdata = {
- { IO_ADDRESS(VERSATILE_SYS_BASE), VERSATILE_SYS_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SIC_BASE), VERSATILE_SIC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_VIC_BASE), VERSATILE_VIC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SCTL_BASE), VERSATILE_SCTL_BASE, SZ_4K * 9, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_SYS_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_SIC_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SIC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_VIC_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_VIC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
+ .length = SZ_4K * 9,
+ .type = MT_DEVICE
+ },
#ifdef CONFIG_MACH_VERSATILE_AB
- { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_IB2_BASE), VERSATILE_IB2_BASE, SZ_64M, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
#endif
#ifdef CONFIG_DEBUG_LL
- { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_UART0_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
#endif
#ifdef CONFIG_PCI
- { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE },
- { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE },
- { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_BASE,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_BASE),
+ .length = VERSATILE_PCI_BASE_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_CFG_VIRT_BASE,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
+ .length = VERSATILE_PCI_CFG_BASE_SIZE,
+ .type = MT_DEVICE
+ },
#if 0
- { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE },
+ {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
#endif
#endif
};
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 26356ce..47b0b76 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -75,7 +75,7 @@
};
static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
{
unsigned long addr = head->vm_start, end = head->vm_end - size;
unsigned long flags;
@@ -133,7 +133,7 @@
#endif
static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp,
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
pgprot_t prot)
{
struct page *page;
@@ -251,7 +251,7 @@
* virtual and bus address for that space.
*/
void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
{
return __dma_alloc(dev, size, handle, gfp,
pgprot_noncached(pgprot_kernel));
@@ -263,7 +263,7 @@
* dma_alloc_coherent above.
*/
void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
{
return __dma_alloc(dev, size, handle, gfp,
pgprot_writecombine(pgprot_kernel));
@@ -397,8 +397,6 @@
pte_t *pte;
int ret = 0;
- spin_lock(&init_mm.page_table_lock);
-
do {
pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
@@ -409,7 +407,7 @@
}
WARN_ON(!pmd_none(*pmd));
- pte = pte_alloc_kernel(&init_mm, pmd, CONSISTENT_BASE);
+ pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
if (!pte) {
printk(KERN_ERR "%s: no pte tables\n", __func__);
ret = -ENOMEM;
@@ -419,8 +417,6 @@
consistent_pte = pte;
} while (0);
- spin_unlock(&init_mm.page_table_lock);
-
return ret;
}
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 27d0415..269ce69 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -22,9 +22,7 @@
#endif
#define from_address (0xffff8000)
-#define from_pgprot PAGE_KERNEL
#define to_address (0xffffc000)
-#define to_pgprot PAGE_KERNEL
#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
@@ -34,7 +32,7 @@
* Copy the user page. No aliasing to deal with so we can just
* attack the kernel's existing mapping of these pages.
*/
-void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
{
copy_page(kto, kfrom);
}
@@ -43,7 +41,7 @@
* Clear the user page. No aliasing to deal with so we can just
* attack the kernel's existing mapping of this page.
*/
-void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
{
clear_page(kaddr);
}
@@ -51,7 +49,7 @@
/*
* Copy the page, taking account of the cache colour.
*/
-void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
{
unsigned int offset = CACHE_COLOUR(vaddr);
unsigned long from, to;
@@ -72,8 +70,8 @@
*/
spin_lock(&v6_lock);
- set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
- set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
+ set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL));
+ set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL));
from = from_address + (offset << PAGE_SHIFT);
to = to_address + (offset << PAGE_SHIFT);
@@ -91,7 +89,7 @@
* so remap the kernel page into the same cache colour as the user
* page.
*/
-void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
{
unsigned int offset = CACHE_COLOUR(vaddr);
unsigned long to = to_address + (offset << PAGE_SHIFT);
@@ -112,7 +110,7 @@
*/
spin_lock(&v6_lock);
- set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
+ set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL));
flush_tlb_kernel_page(to);
clear_page((void *)to);
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index be4ab3d..7fc1b35 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -26,6 +26,11 @@
/*
* We take the easy way out of this problem - we make the
* PTE uncacheable. However, we leave the write buffer on.
+ *
+ * Note that the pte lock held when calling update_mmu_cache must also
+ * guard the pte (somewhere else in the same mm) that we modify here.
+ * Therefore those configurations which might call adjust_pte (those
+ * without CONFIG_CPU_CACHE_VIPT) cannot support split page_table_lock.
*/
static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
{
@@ -127,7 +132,7 @@
* 2. If we have multiple shared mappings of the same space in
* an object, we need to deal with the cache aliasing issues.
*
- * Note that the page_table_lock will be held.
+ * Note that the pte lock will be held.
*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
{
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index edffa47..fd079ff 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mm/init.c
*
- * Copyright (C) 1995-2002 Russell King
+ * Copyright (C) 1995-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -86,14 +86,19 @@
printk("%d pages swap cached\n", cached);
}
-struct node_info {
- unsigned int start;
- unsigned int end;
- int bootmap_pages;
-};
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+ return pmd_offset(pgd, virt);
+}
-#define O_PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-#define O_PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT)
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+ return pmd_off(pgd_offset_k(virt), virt);
+}
+
+#define for_each_nodebank(iter,mi,no) \
+ for (iter = 0; iter < mi->nr_banks; iter++) \
+ if (mi->bank[iter].node == no)
/*
* FIXME: We really want to avoid allocating the bootmap bitmap
@@ -106,15 +111,12 @@
{
unsigned int start_pfn, bank, bootmap_pfn;
- start_pfn = O_PFN_UP(__pa(&_end));
+ start_pfn = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
bootmap_pfn = 0;
- for (bank = 0; bank < mi->nr_banks; bank ++) {
+ for_each_nodebank(bank, mi, node) {
unsigned int start, end;
- if (mi->bank[bank].node != node)
- continue;
-
start = mi->bank[bank].start >> PAGE_SHIFT;
end = (mi->bank[bank].size +
mi->bank[bank].start) >> PAGE_SHIFT;
@@ -140,92 +142,6 @@
return bootmap_pfn;
}
-/*
- * Scan the memory info structure and pull out:
- * - the end of memory
- * - the number of nodes
- * - the pfn range of each node
- * - the number of bootmem bitmap pages
- */
-static unsigned int __init
-find_memend_and_nodes(struct meminfo *mi, struct node_info *np)
-{
- unsigned int i, bootmem_pages = 0, memend_pfn = 0;
-
- for (i = 0; i < MAX_NUMNODES; i++) {
- np[i].start = -1U;
- np[i].end = 0;
- np[i].bootmap_pages = 0;
- }
-
- for (i = 0; i < mi->nr_banks; i++) {
- unsigned long start, end;
- int node;
-
- if (mi->bank[i].size == 0) {
- /*
- * Mark this bank with an invalid node number
- */
- mi->bank[i].node = -1;
- continue;
- }
-
- node = mi->bank[i].node;
-
- /*
- * Make sure we haven't exceeded the maximum number of nodes
- * that we have in this configuration. If we have, we're in
- * trouble. (maybe we ought to limit, instead of bugging?)
- */
- if (node >= MAX_NUMNODES)
- BUG();
- node_set_online(node);
-
- /*
- * Get the start and end pfns for this bank
- */
- start = mi->bank[i].start >> PAGE_SHIFT;
- end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
-
- if (np[node].start > start)
- np[node].start = start;
-
- if (np[node].end < end)
- np[node].end = end;
-
- if (memend_pfn < end)
- memend_pfn = end;
- }
-
- /*
- * Calculate the number of pages we require to
- * store the bootmem bitmaps.
- */
- for_each_online_node(i) {
- if (np[i].end == 0)
- continue;
-
- np[i].bootmap_pages = bootmem_bootmap_pages(np[i].end -
- np[i].start);
- bootmem_pages += np[i].bootmap_pages;
- }
-
- high_memory = __va(memend_pfn << PAGE_SHIFT);
-
- /*
- * This doesn't seem to be used by the Linux memory
- * manager any more. If we can get rid of it, we
- * also get rid of some of the stuff above as well.
- *
- * Note: max_low_pfn and max_pfn reflect the number
- * of _pages_ in the system, not the maximum PFN.
- */
- max_low_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
- max_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
-
- return bootmem_pages;
-}
-
static int __init check_initrd(struct meminfo *mi)
{
int initrd_node = -2;
@@ -266,9 +182,8 @@
/*
* Reserve the various regions of node 0
*/
-static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int bootmap_pages)
+static __init void reserve_node_zero(pg_data_t *pgdat)
{
- pg_data_t *pgdat = NODE_DATA(0);
unsigned long res_size = 0;
/*
@@ -289,13 +204,6 @@
PTRS_PER_PGD * sizeof(pgd_t));
/*
- * And don't forget to reserve the allocator bitmap,
- * which will be freed later.
- */
- reserve_bootmem_node(pgdat, bootmap_pfn << PAGE_SHIFT,
- bootmap_pages << PAGE_SHIFT);
-
- /*
* Hmm... This should go elsewhere, but we really really need to
* stop things allocating the low memory; ideally we need a better
* implementation of GFP_DMA which does not assume that DMA-able
@@ -324,93 +232,264 @@
reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
}
-/*
- * Register all available RAM in this node with the bootmem allocator.
- */
-static inline void free_bootmem_node_bank(int node, struct meminfo *mi)
+void __init build_mem_type_table(void);
+void __init create_mapping(struct map_desc *md);
+
+static unsigned long __init
+bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
{
- pg_data_t *pgdat = NODE_DATA(node);
- int bank;
+ unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+ unsigned long start_pfn, end_pfn, boot_pfn;
+ unsigned int boot_pages;
+ pg_data_t *pgdat;
+ int i;
- for (bank = 0; bank < mi->nr_banks; bank++)
- if (mi->bank[bank].node == node)
- free_bootmem_node(pgdat, mi->bank[bank].start,
- mi->bank[bank].size);
-}
-
-/*
- * Initialise the bootmem allocator for all nodes. This is called
- * early during the architecture specific initialisation.
- */
-static void __init bootmem_init(struct meminfo *mi)
-{
- struct node_info node_info[MAX_NUMNODES], *np = node_info;
- unsigned int bootmap_pages, bootmap_pfn, map_pg;
- int node, initrd_node;
-
- bootmap_pages = find_memend_and_nodes(mi, np);
- bootmap_pfn = find_bootmap_pfn(0, mi, bootmap_pages);
- initrd_node = check_initrd(mi);
-
- map_pg = bootmap_pfn;
+ start_pfn = -1UL;
+ end_pfn = 0;
/*
- * Initialise the bootmem nodes.
- *
- * What we really want to do is:
- *
- * unmap_all_regions_except_kernel();
- * for_each_node_in_reverse_order(node) {
- * map_node(node);
- * allocate_bootmem_map(node);
- * init_bootmem_node(node);
- * free_bootmem_node(node);
- * }
- *
- * but this is a 2.5-type change. For now, we just set
- * the nodes up in reverse order.
- *
- * (we could also do with rolling bootmem_init and paging_init
- * into one generic "memory_init" type function).
+ * Calculate the pfn range, and map the memory banks for this node.
*/
- np += num_online_nodes() - 1;
- for (node = num_online_nodes() - 1; node >= 0; node--, np--) {
- /*
- * If there are no pages in this node, ignore it.
- * Note that node 0 must always have some pages.
- */
- if (np->end == 0 || !node_online(node)) {
- if (node == 0)
- BUG();
- continue;
- }
+ for_each_nodebank(i, mi, node) {
+ unsigned long start, end;
+ struct map_desc map;
- /*
- * Initialise the bootmem allocator.
- */
- init_bootmem_node(NODE_DATA(node), map_pg, np->start, np->end);
- free_bootmem_node_bank(node, mi);
- map_pg += np->bootmap_pages;
+ start = mi->bank[i].start >> PAGE_SHIFT;
+ end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
- /*
- * If this is node 0, we need to reserve some areas ASAP -
- * we may use bootmem on node 0 to setup the other nodes.
- */
- if (node == 0)
- reserve_node_zero(bootmap_pfn, bootmap_pages);
+ if (start_pfn > start)
+ start_pfn = start;
+ if (end_pfn < end)
+ end_pfn = end;
+
+ map.pfn = __phys_to_pfn(mi->bank[i].start);
+ map.virtual = __phys_to_virt(mi->bank[i].start);
+ map.length = mi->bank[i].size;
+ map.type = MT_MEMORY;
+
+ create_mapping(&map);
}
+ /*
+ * If there is no memory in this node, ignore it.
+ */
+ if (end_pfn == 0)
+ return end_pfn;
+
+ /*
+ * Allocate the bootmem bitmap page.
+ */
+ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+ boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
+
+ /*
+ * Initialise the bootmem allocator for this node, handing the
+ * memory banks over to bootmem.
+ */
+ node_set_online(node);
+ pgdat = NODE_DATA(node);
+ init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
+
+ for_each_nodebank(i, mi, node)
+ free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size);
+
+ /*
+ * Reserve the bootmem bitmap for this node.
+ */
+ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
+ boot_pages << PAGE_SHIFT);
#ifdef CONFIG_BLK_DEV_INITRD
- if (phys_initrd_size && initrd_node >= 0) {
- reserve_bootmem_node(NODE_DATA(initrd_node), phys_initrd_start,
+ /*
+ * If the initrd is in this node, reserve its memory.
+ */
+ if (node == initrd_node) {
+ reserve_bootmem_node(pgdat, phys_initrd_start,
phys_initrd_size);
initrd_start = __phys_to_virt(phys_initrd_start);
initrd_end = initrd_start + phys_initrd_size;
}
#endif
- BUG_ON(map_pg != bootmap_pfn + bootmap_pages);
+ /*
+ * Finally, reserve any node zero regions.
+ */
+ if (node == 0)
+ reserve_node_zero(pgdat);
+
+ /*
+ * initialise the zones within this node.
+ */
+ memset(zone_size, 0, sizeof(zone_size));
+ memset(zhole_size, 0, sizeof(zhole_size));
+
+ /*
+ * The size of this node has already been determined. If we need
+ * to do anything fancy with the allocation of this memory to the
+ * zones, now is the time to do it.
+ */
+ zone_size[0] = end_pfn - start_pfn;
+
+ /*
+ * For each bank in this node, calculate the size of the holes.
+ * holes = node_size - sum(bank_sizes_in_node)
+ */
+ zhole_size[0] = zone_size[0];
+ for_each_nodebank(i, mi, node)
+ zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
+
+ /*
+ * Adjust the sizes according to any special requirements for
+ * this machine type.
+ */
+ arch_adjust_zones(node, zone_size, zhole_size);
+
+ free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+
+ return end_pfn;
+}
+
+static void __init bootmem_init(struct meminfo *mi)
+{
+ unsigned long addr, memend_pfn = 0;
+ int node, initrd_node, i;
+
+ /*
+ * Invalidate the node number for empty or invalid memory banks
+ */
+ for (i = 0; i < mi->nr_banks; i++)
+ if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES)
+ mi->bank[i].node = -1;
+
+ memcpy(&meminfo, mi, sizeof(meminfo));
+
+ /*
+ * Clear out all the mappings below the kernel image.
+ */
+ for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+#ifdef CONFIG_XIP_KERNEL
+ /* The XIP kernel is mapped in the module area -- skip over it */
+ addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+#endif
+ for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Clear out all the kernel space mappings, except for the first
+ * memory bank, up to the end of the vmalloc region.
+ */
+ for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+ addr < VMALLOC_END; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Locate which node contains the ramdisk image, if any.
+ */
+ initrd_node = check_initrd(mi);
+
+ /*
+ * Run through each node initialising the bootmem allocator.
+ */
+ for_each_node(node) {
+ unsigned long end_pfn;
+
+ end_pfn = bootmem_init_node(node, initrd_node, mi);
+
+ /*
+ * Remember the highest memory PFN.
+ */
+ if (end_pfn > memend_pfn)
+ memend_pfn = end_pfn;
+ }
+
+ high_memory = __va(memend_pfn << PAGE_SHIFT);
+
+ /*
+ * This doesn't seem to be used by the Linux memory manager any
+ * more, but is used by ll_rw_block. If we can get rid of it, we
+ * also get rid of some of the stuff above as well.
+ *
+ * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
+ * the system, not the maximum PFN.
+ */
+ max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+}
+
+/*
+ * Set up device the mappings. Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function. (Do it by code inspection!)
+ */
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+ struct map_desc map;
+ unsigned long addr;
+ void *vectors;
+
+ for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Map the kernel if it is XIP.
+ * It is always first in the modulearea.
+ */
+#ifdef CONFIG_XIP_KERNEL
+ map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK);
+ map.virtual = MODULE_START;
+ map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK;
+ map.type = MT_ROM;
+ create_mapping(&map);
+#endif
+
+ /*
+ * Map the cache flushing regions.
+ */
+#ifdef FLUSH_BASE
+ map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
+ map.virtual = FLUSH_BASE;
+ map.length = PGDIR_SIZE;
+ map.type = MT_CACHECLEAN;
+ create_mapping(&map);
+#endif
+#ifdef FLUSH_BASE_MINICACHE
+ map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE);
+ map.virtual = FLUSH_BASE_MINICACHE;
+ map.length = PGDIR_SIZE;
+ map.type = MT_MINICLEAN;
+ create_mapping(&map);
+#endif
+
+ flush_cache_all();
+ local_flush_tlb_all();
+
+ vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+ BUG_ON(!vectors);
+
+ /*
+ * Create a mapping for the machine vectors at the high-vectors
+ * location (0xffff0000). If we aren't using high-vectors, also
+ * create a mapping at the low-vectors virtual address.
+ */
+ map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+ map.virtual = 0xffff0000;
+ map.length = PAGE_SIZE;
+ map.type = MT_HIGH_VECTORS;
+ create_mapping(&map);
+
+ if (!vectors_high()) {
+ map.virtual = 0;
+ map.type = MT_LOW_VECTORS;
+ create_mapping(&map);
+ }
+
+ /*
+ * Ask the machine support to map in the statically mapped devices.
+ * After this point, we can start to touch devices again.
+ */
+ if (mdesc->map_io)
+ mdesc->map_io();
}
/*
@@ -420,87 +499,17 @@
void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
{
void *zero_page;
- int node;
+ build_mem_type_table();
bootmem_init(mi);
+ devicemaps_init(mdesc);
- memcpy(&meminfo, mi, sizeof(meminfo));
+ top_pmd = pmd_off_k(0xffff0000);
/*
* allocate the zero page. Note that we count on this going ok.
*/
zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
-
- /*
- * initialise the page tables.
- */
- memtable_init(mi);
- if (mdesc->map_io)
- mdesc->map_io();
- local_flush_tlb_all();
-
- /*
- * initialise the zones within each node
- */
- for_each_online_node(node) {
- unsigned long zone_size[MAX_NR_ZONES];
- unsigned long zhole_size[MAX_NR_ZONES];
- struct bootmem_data *bdata;
- pg_data_t *pgdat;
- int i;
-
- /*
- * Initialise the zone size information.
- */
- for (i = 0; i < MAX_NR_ZONES; i++) {
- zone_size[i] = 0;
- zhole_size[i] = 0;
- }
-
- pgdat = NODE_DATA(node);
- bdata = pgdat->bdata;
-
- /*
- * The size of this node has already been determined.
- * If we need to do anything fancy with the allocation
- * of this memory to the zones, now is the time to do
- * it.
- */
- zone_size[0] = bdata->node_low_pfn -
- (bdata->node_boot_start >> PAGE_SHIFT);
-
- /*
- * If this zone has zero size, skip it.
- */
- if (!zone_size[0])
- continue;
-
- /*
- * For each bank in this node, calculate the size of the
- * holes. holes = node_size - sum(bank_sizes_in_node)
- */
- zhole_size[0] = zone_size[0];
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].node != node)
- continue;
-
- zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
- }
-
- /*
- * Adjust the sizes according to any special
- * requirements for this machine type.
- */
- arch_adjust_zones(node, zone_size, zhole_size);
-
- free_area_init_node(node, pgdat, zone_size,
- bdata->node_boot_start >> PAGE_SHIFT, zhole_size);
- }
-
- /*
- * finish off the bad pages once
- * the mem_map is initialised
- */
memzero(zero_page, PAGE_SIZE);
empty_zero_page = virt_to_page(zero_page);
flush_dcache_page(empty_zero_page);
@@ -562,10 +571,7 @@
* may not be the case, especially if the user has provided the
* information on the command line.
*/
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].size == 0 || mi->bank[i].node != node)
- continue;
-
+ for_each_nodebank(i, mi, node) {
bank_start = mi->bank[i].start >> PAGE_SHIFT;
if (bank_start < prev_bank_end) {
printk(KERN_ERR "MEM: unordered memory banks. "
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 7110e54..0f128c2 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -26,6 +26,7 @@
#include <linux/vmalloc.h>
#include <asm/cacheflush.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
@@ -74,7 +75,7 @@
pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags);
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, pgprot);
@@ -96,7 +97,6 @@
phys_addr -= address;
dir = pgd_offset(&init_mm, address);
BUG_ON(address >= end);
- spin_lock(&init_mm.page_table_lock);
do {
pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
if (!pmd) {
@@ -113,7 +113,6 @@
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_cache_vmap(start, end);
return err;
}
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index d125a3d..1221fdd 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mm/mm-armv.c
*
- * Copyright (C) 1998-2002 Russell King
+ * Copyright (C) 1998-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -180,11 +180,6 @@
if (!vectors_high()) {
/*
- * This lock is here just to satisfy pmd_alloc and pte_lock
- */
- spin_lock(&mm->page_table_lock);
-
- /*
* On ARM, first page must always be allocated since it
* contains the machine vectors.
*/
@@ -201,23 +196,14 @@
set_pte(new_pte, *init_pte);
pte_unmap_nested(init_pte);
pte_unmap(new_pte);
-
- spin_unlock(&mm->page_table_lock);
}
return new_pgd;
no_pte:
- spin_unlock(&mm->page_table_lock);
pmd_free(new_pmd);
- free_pages((unsigned long)new_pgd, 2);
- return NULL;
-
no_pmd:
- spin_unlock(&mm->page_table_lock);
free_pages((unsigned long)new_pgd, 2);
- return NULL;
-
no_pgd:
return NULL;
}
@@ -243,6 +229,7 @@
pte = pmd_page(*pmd);
pmd_clear(pmd);
dec_page_state(nr_page_table_pages);
+ pte_lock_deinit(pte);
pte_free(pte);
pmd_free(pmd);
free:
@@ -305,16 +292,6 @@
set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
}
-/*
- * Clear any PGD mapping. On a two-level page table system,
- * the clearance is done by the middle-level functions (pmd)
- * rather than the top-level (pgd) functions.
- */
-static inline void clear_mapping(unsigned long virt)
-{
- pmd_clear(pmd_off_k(virt));
-}
-
struct mem_types {
unsigned int prot_pte;
unsigned int prot_l1;
@@ -373,7 +350,7 @@
/*
* Adjust the PMD section entries according to the CPU in use.
*/
-static void __init build_mem_type_table(void)
+void __init build_mem_type_table(void)
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
@@ -483,25 +460,25 @@
* offsets, and we take full advantage of sections and
* supersections.
*/
-static void __init create_mapping(struct map_desc *md)
+void __init create_mapping(struct map_desc *md)
{
unsigned long virt, length;
int prot_sect, prot_l1, domain;
pgprot_t prot_pte;
- long off;
+ unsigned long off = (u32)__pfn_to_phys(md->pfn);
if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
printk(KERN_WARNING "BUG: not creating mapping for "
- "0x%08lx at 0x%08lx in user region\n",
- md->physical, md->virtual);
+ "0x%016llx at 0x%08lx in user region\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
- printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx "
+ printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx "
"overlaps vmalloc space\n",
- md->physical, md->virtual);
+ __pfn_to_phys((u64)md->pfn), md->virtual);
}
domain = mem_types[md->type].domain;
@@ -509,15 +486,40 @@
prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
+ /*
+ * Catch 36-bit addresses
+ */
+ if(md->pfn >= 0x100000) {
+ if(domain) {
+ printk(KERN_ERR "MM: invalid domain in supersection "
+ "mapping for 0x%016llx at 0x%08lx\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+ if((md->virtual | md->length | __pfn_to_phys(md->pfn))
+ & ~SUPERSECTION_MASK) {
+ printk(KERN_ERR "MM: cannot create mapping for "
+ "0x%016llx at 0x%08lx invalid alignment\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+
+ /*
+ * Shift bits [35:32] of address into bits [23:20] of PMD
+ * (See ARMv6 spec).
+ */
+ off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
+ }
+
virt = md->virtual;
- off = md->physical - virt;
+ off -= virt;
length = md->length;
if (mem_types[md->type].prot_l1 == 0 &&
(virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
"be mapped using pages, ignoring.\n",
- md->physical, md->virtual);
+ __pfn_to_phys(md->pfn), md->virtual);
return;
}
@@ -535,13 +537,22 @@
* of the actual domain assignments in use.
*/
if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) {
- /* Align to supersection boundary */
- while ((virt & ~SUPERSECTION_MASK || (virt + off) &
- ~SUPERSECTION_MASK) && length >= (PGDIR_SIZE / 2)) {
- alloc_init_section(virt, virt + off, prot_sect);
+ /*
+ * Align to supersection boundary if !high pages.
+ * High pages have already been checked for proper
+ * alignment above and they will fail the SUPSERSECTION_MASK
+ * check because of the way the address is encoded into
+ * offset.
+ */
+ if (md->pfn <= 0x100000) {
+ while ((virt & ~SUPERSECTION_MASK ||
+ (virt + off) & ~SUPERSECTION_MASK) &&
+ length >= (PGDIR_SIZE / 2)) {
+ alloc_init_section(virt, virt + off, prot_sect);
- virt += (PGDIR_SIZE / 2);
- length -= (PGDIR_SIZE / 2);
+ virt += (PGDIR_SIZE / 2);
+ length -= (PGDIR_SIZE / 2);
+ }
}
while (length >= SUPERSECTION_SIZE) {
@@ -601,100 +612,6 @@
}
}
-extern void _stext, _etext;
-
-/*
- * Setup initial mappings. We use the page we allocated for zero page to hold
- * the mappings, which will get overwritten by the vectors in traps_init().
- * The mappings must be in virtual address order.
- */
-void __init memtable_init(struct meminfo *mi)
-{
- struct map_desc *init_maps, *p, *q;
- unsigned long address = 0;
- int i;
-
- build_mem_type_table();
-
- init_maps = p = alloc_bootmem_low_pages(PAGE_SIZE);
-
-#ifdef CONFIG_XIP_KERNEL
- p->physical = CONFIG_XIP_PHYS_ADDR & PMD_MASK;
- p->virtual = (unsigned long)&_stext & PMD_MASK;
- p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
- p->type = MT_ROM;
- p ++;
-#endif
-
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].size == 0)
- continue;
-
- p->physical = mi->bank[i].start;
- p->virtual = __phys_to_virt(p->physical);
- p->length = mi->bank[i].size;
- p->type = MT_MEMORY;
- p ++;
- }
-
-#ifdef FLUSH_BASE
- p->physical = FLUSH_BASE_PHYS;
- p->virtual = FLUSH_BASE;
- p->length = PGDIR_SIZE;
- p->type = MT_CACHECLEAN;
- p ++;
-#endif
-
-#ifdef FLUSH_BASE_MINICACHE
- p->physical = FLUSH_BASE_PHYS + PGDIR_SIZE;
- p->virtual = FLUSH_BASE_MINICACHE;
- p->length = PGDIR_SIZE;
- p->type = MT_MINICLEAN;
- p ++;
-#endif
-
- /*
- * Go through the initial mappings, but clear out any
- * pgdir entries that are not in the description.
- */
- q = init_maps;
- do {
- if (address < q->virtual || q == p) {
- clear_mapping(address);
- address += PGDIR_SIZE;
- } else {
- create_mapping(q);
-
- address = q->virtual + q->length;
- address = (address + PGDIR_SIZE - 1) & PGDIR_MASK;
-
- q ++;
- }
- } while (address != 0);
-
- /*
- * Create a mapping for the machine vectors at the high-vectors
- * location (0xffff0000). If we aren't using high-vectors, also
- * create a mapping at the low-vectors virtual address.
- */
- init_maps->physical = virt_to_phys(init_maps);
- init_maps->virtual = 0xffff0000;
- init_maps->length = PAGE_SIZE;
- init_maps->type = MT_HIGH_VECTORS;
- create_mapping(init_maps);
-
- if (!vectors_high()) {
- init_maps->virtual = 0;
- init_maps->type = MT_LOW_VECTORS;
- create_mapping(init_maps);
- }
-
- flush_cache_all();
- local_flush_tlb_all();
-
- top_pmd = pmd_off_k(0xffff0000);
-}
-
/*
* Create the architecture specific mappings
*/
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 8ffb523..6a94e54 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,6 +6,6 @@
oprofilefs.o oprofile_stats.o \
timer_int.o )
-oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
-oprofile-$(CONFIG_CPU_XSCALE) += common.o op_model_xscale.o
+oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
+oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index df35c45..7c22c1261 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -49,42 +49,22 @@
static struct frame_tail* user_backtrace(struct frame_tail *tail)
{
- struct frame_tail buftail;
+ struct frame_tail buftail[2];
- /* hardware pte might not be valid due to dirty/accessed bit emulation
- * so we use copy_from_user and benefit from exception fixups */
- if (copy_from_user(&buftail, tail, sizeof(struct frame_tail)))
+ /* Also check accessibility of one struct frame_tail beyond */
+ if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+ return NULL;
+ if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
return NULL;
- oprofile_add_trace(buftail.lr);
+ oprofile_add_trace(buftail[0].lr);
/* frame pointers should strictly progress back up the stack
* (towards higher addresses) */
- if (tail >= buftail.fp)
+ if (tail >= buftail[0].fp)
return NULL;
- return buftail.fp-1;
-}
-
-/* Compare two addresses and see if they're on the same page */
-#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \
- == ((((unsigned long) y) + offset) >> PAGE_SHIFT))
-
-/* check that the page(s) containing the frame tail are present */
-static int pages_present(struct frame_tail *tail)
-{
- struct mm_struct * mm = current->mm;
-
- if (!check_user_page_readable(mm, (unsigned long)tail))
- return 0;
-
- if (CMP_ADDR_EQUAL(tail, tail, 8))
- return 1;
-
- if (!check_user_page_readable(mm, ((unsigned long)tail) + 8))
- return 0;
-
- return 1;
+ return buftail[0].fp-1;
}
/*
@@ -118,7 +98,6 @@
void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
{
struct frame_tail *tail;
- unsigned long last_address = 0;
tail = ((struct frame_tail *) regs->ARM_fp) - 1;
@@ -132,13 +111,6 @@
return;
}
- while (depth-- && tail && !((unsigned long) tail & 3)) {
- if ((!CMP_ADDR_EQUAL(last_address, tail, 0)
- || !CMP_ADDR_EQUAL(last_address, tail, 8))
- && !pages_present(tail))
- return;
- last_address = (unsigned long) tail;
+ while (depth-- && tail && !((unsigned long) tail & 3))
tail = user_backtrace(tail);
- }
}
-
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index e57dde8..1415930 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,40 +10,94 @@
#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/errno.h>
-#include <asm/semaphore.h>
#include <linux/sysdev.h>
+#include <asm/semaphore.h>
#include "op_counter.h"
#include "op_arm_model.h"
-static struct op_arm_model_spec *pmu_model;
-static int pmu_enabled;
-static struct semaphore pmu_sem;
+static struct op_arm_model_spec *op_arm_model;
+static int op_arm_enabled;
+static struct semaphore op_arm_sem;
-static int pmu_start(void);
-static int pmu_setup(void);
-static void pmu_stop(void);
-static int pmu_create_files(struct super_block *, struct dentry *);
+struct op_counter_config counter_config[OP_MAX_COUNTER];
-#ifdef CONFIG_PM
-static int pmu_suspend(struct sys_device *dev, pm_message_t state)
+static int op_arm_create_files(struct super_block *sb, struct dentry *root)
{
- if (pmu_enabled)
- pmu_stop();
+ unsigned int i;
+
+ for (i = 0; i < op_arm_model->num_counters; i++) {
+ struct dentry *dir;
+ char buf[2];
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+ oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
+ oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
+ oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ }
+
return 0;
}
-static int pmu_resume(struct sys_device *dev)
+static int op_arm_setup(void)
{
- if (pmu_enabled)
- pmu_start();
+ int ret;
+
+ spin_lock(&oprofilefs_lock);
+ ret = op_arm_model->setup_ctrs();
+ spin_unlock(&oprofilefs_lock);
+ return ret;
+}
+
+static int op_arm_start(void)
+{
+ int ret = -EBUSY;
+
+ down(&op_arm_sem);
+ if (!op_arm_enabled) {
+ ret = op_arm_model->start();
+ op_arm_enabled = !ret;
+ }
+ up(&op_arm_sem);
+ return ret;
+}
+
+static void op_arm_stop(void)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled)
+ op_arm_model->stop();
+ op_arm_enabled = 0;
+ up(&op_arm_sem);
+}
+
+#ifdef CONFIG_PM
+static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled)
+ op_arm_model->stop();
+ up(&op_arm_sem);
+ return 0;
+}
+
+static int op_arm_resume(struct sys_device *dev)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled && op_arm_model->start())
+ op_arm_enabled = 0;
+ up(&op_arm_sem);
return 0;
}
static struct sysdev_class oprofile_sysclass = {
set_kset_name("oprofile"),
- .resume = pmu_resume,
- .suspend = pmu_suspend,
+ .resume = op_arm_resume,
+ .suspend = op_arm_suspend,
};
static struct sys_device device_oprofile = {
@@ -71,86 +125,41 @@
#define exit_driverfs() do { } while (0)
#endif /* CONFIG_PM */
-struct op_counter_config counter_config[OP_MAX_COUNTER];
-
-static int pmu_create_files(struct super_block *sb, struct dentry *root)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
- unsigned int i;
+ struct op_arm_model_spec *spec = NULL;
+ int ret = -ENODEV;
- for (i = 0; i < pmu_model->num_counters; i++) {
- struct dentry *dir;
- char buf[2];
+#ifdef CONFIG_CPU_XSCALE
+ spec = &op_xscale_spec;
+#endif
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
- oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
- oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
- oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
- oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
- oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
- oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ if (spec) {
+ init_MUTEX(&op_arm_sem);
+
+ if (spec->init() < 0)
+ return -ENODEV;
+
+ op_arm_model = spec;
+ init_driverfs();
+ ops->create_files = op_arm_create_files;
+ ops->setup = op_arm_setup;
+ ops->shutdown = op_arm_stop;
+ ops->start = op_arm_start;
+ ops->stop = op_arm_stop;
+ ops->cpu_type = op_arm_model->name;
+ ops->backtrace = arm_backtrace;
+ printk(KERN_INFO "oprofile: using %s\n", spec->name);
}
- return 0;
-}
-
-static int pmu_setup(void)
-{
- int ret;
-
- spin_lock(&oprofilefs_lock);
- ret = pmu_model->setup_ctrs();
- spin_unlock(&oprofilefs_lock);
return ret;
}
-static int pmu_start(void)
+void oprofile_arch_exit(void)
{
- int ret = -EBUSY;
-
- down(&pmu_sem);
- if (!pmu_enabled) {
- ret = pmu_model->start();
- pmu_enabled = !ret;
- }
- up(&pmu_sem);
- return ret;
-}
-
-static void pmu_stop(void)
-{
- down(&pmu_sem);
- if (pmu_enabled)
- pmu_model->stop();
- pmu_enabled = 0;
- up(&pmu_sem);
-}
-
-int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec)
-{
- init_MUTEX(&pmu_sem);
-
- if (spec->init() < 0)
- return -ENODEV;
-
- pmu_model = spec;
- init_driverfs();
- ops->create_files = pmu_create_files;
- ops->setup = pmu_setup;
- ops->shutdown = pmu_stop;
- ops->start = pmu_start;
- ops->stop = pmu_stop;
- ops->cpu_type = pmu_model->name;
- printk(KERN_INFO "oprofile: using %s PMU\n", spec->name);
-
- return 0;
-}
-
-void pmu_exit(void)
-{
- if (pmu_model) {
+ if (op_arm_model) {
exit_driverfs();
- pmu_model = NULL;
+ op_arm_model = NULL;
}
}
diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c
deleted file mode 100644
index d315a3a..0000000
--- a/arch/arm/oprofile/init.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include "op_arm_model.h"
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- int ret = -ENODEV;
-
-#ifdef CONFIG_CPU_XSCALE
- ret = pmu_init(ops, &op_xscale_spec);
-#endif
-
- ops->backtrace = arm_backtrace;
-
- return ret;
-}
-
-void oprofile_arch_exit(void)
-{
-#ifdef CONFIG_CPU_XSCALE
- pmu_exit();
-#endif
-}
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 2148d07..38c6ad1 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -26,6 +26,6 @@
extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
-extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
-extern void pmu_exit(void);
+extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
+extern void op_arm_exit(void);
#endif /* OP_ARM_MODEL_H */
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 52a58b2..a020fe1 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/string.h>
#include <asm/io.h>
#include <asm/semaphore.h>
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 7719a40..7ad69f1 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -59,7 +59,11 @@
}
static struct map_desc omap_sram_io_desc[] __initdata = {
- { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE }
+ { /* .length gets filled in at runtime */
+ .virtual = OMAP1_SRAM_BASE,
+ .pfn = __phys_to_pfn(OMAP1_SRAM_START),
+ .type = MT_DEVICE
+ }
};
/*
diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c
index 8a52124..cf7e977 100644
--- a/arch/arm26/kernel/ptrace.c
+++ b/arch/arm26/kernel/ptrace.c
@@ -665,7 +665,7 @@
return ret;
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret;
diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c
index e66aedd..3355253 100644
--- a/arch/arm26/kernel/time.c
+++ b/arch/arm26/kernel/time.c
@@ -34,10 +34,6 @@
#include <asm/irq.h>
#include <asm/ioc.h>
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
extern unsigned long wall_jiffies;
/* this needs a better home */
diff --git a/arch/arm26/mm/memc.c b/arch/arm26/mm/memc.c
index 8e8a2bb2..34def63 100644
--- a/arch/arm26/mm/memc.c
+++ b/arch/arm26/mm/memc.c
@@ -79,12 +79,6 @@
goto no_pgd;
/*
- * This lock is here just to satisfy pmd_alloc and pte_lock
- * FIXME: I bet we could avoid taking it pretty much altogether
- */
- spin_lock(&mm->page_table_lock);
-
- /*
* On ARM, first page must always be allocated since it contains
* the machine vectors.
*/
@@ -92,7 +86,7 @@
if (!new_pmd)
goto no_pmd;
- new_pte = pte_alloc_kernel(mm, new_pmd, 0);
+ new_pte = pte_alloc_map(mm, new_pmd, 0);
if (!new_pte)
goto no_pte;
@@ -101,6 +95,7 @@
init_pte = pte_offset(init_pmd, 0);
set_pte(new_pte, *init_pte);
+ pte_unmap(new_pte);
/*
* the page table entries are zeroed
@@ -112,23 +107,14 @@
memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
(PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
- spin_unlock(&mm->page_table_lock);
-
/* update MEMC tables */
cpu_memc_update_all(new_pgd);
return new_pgd;
no_pte:
- spin_unlock(&mm->page_table_lock);
pmd_free(new_pmd);
- free_pgd_slow(new_pgd);
- return NULL;
-
no_pmd:
- spin_unlock(&mm->page_table_lock);
free_pgd_slow(new_pgd);
- return NULL;
-
no_pgd:
return NULL;
}
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index 11ab383..56b038c 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -140,6 +140,7 @@
#include <linux/kernel.h>
#include <linux/config.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/mtd/concat.h>
#include <linux/mtd/map.h>
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index 78ed52b..b679f98 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -20,6 +20,7 @@
#include <linux/kernel.h>
#include <linux/config.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/mtd/concat.h>
#include <linux/mtd/map.h>
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 8233406..b08a28b 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -175,6 +175,8 @@
return 0;
}
+static DEFINE_SPINLOCK(mmu_context_lock);
+
/* Called in schedule() just before actually doing the switch_to. */
void
switch_mm(struct mm_struct *prev, struct mm_struct *next,
@@ -183,10 +185,10 @@
int cpu = smp_processor_id();
/* Make sure there is a MMU context. */
- spin_lock(&next->page_table_lock);
+ spin_lock(&mmu_context_lock);
get_mmu_context(next);
cpu_set(cpu, next->cpu_vm_mask);
- spin_unlock(&next->page_table_lock);
+ spin_unlock(&mmu_context_lock);
/*
* Remember the pgd for the fault handlers. Keep a seperate copy of it
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index a2d99b4..66ba889 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -31,10 +31,7 @@
#include <linux/timex.h>
#include <linux/init.h>
#include <linux/profile.h>
-
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
+#include <linux/sched.h> /* just for sched_clock() - funny that */
int have_rtc; /* used to remember if we have an RTC or not */;
diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c
index ebba11e..a92ac98 100644
--- a/arch/cris/mm/ioremap.c
+++ b/arch/cris/mm/ioremap.c
@@ -52,7 +52,7 @@
if (address >= end)
BUG();
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, prot);
@@ -74,7 +74,6 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
pud_t *pud;
pmd_t *pmd;
@@ -94,7 +93,6 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return error;
}
diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c
index cbe03cb..cb335a1 100644
--- a/arch/frv/kernel/ptrace.c
+++ b/arch/frv/kernel/ptrace.c
@@ -106,7 +106,7 @@
child->thread.frame0->__status |= REG__STATUS_STEP;
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
unsigned long tmp;
diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c
index 8d6558b..2e97412 100644
--- a/arch/frv/kernel/time.c
+++ b/arch/frv/kernel/time.c
@@ -34,9 +34,6 @@
extern unsigned long wall_jiffies;
-u64 jiffies_64 = INITIAL_JIFFIES;
-EXPORT_SYMBOL(jiffies_64);
-
unsigned long __nongprelbss __clkin_clock_speed_HZ;
unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
unsigned long __nongprelbss __res_bus_clock_speed_HZ;
@@ -221,6 +218,7 @@
clock_was_set();
return 0;
}
+EXPORT_SYMBOL(do_settimeofday);
/*
* Scheduler clock - returns current time in nanosec units.
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 819895c..2082a96 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -33,7 +33,7 @@
static DEFINE_SPINLOCK(dma_alloc_lock);
static LIST_HEAD(dma_alloc_list);
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
{
struct dma_alloc_record *new;
struct list_head *this = &dma_alloc_list;
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 27eb120..86fbdad 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -17,7 +17,7 @@
#include <linux/highmem.h>
#include <asm/io.h>
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c
index 4b38d45..342823a 100644
--- a/arch/frv/mm/dma-alloc.c
+++ b/arch/frv/mm/dma-alloc.c
@@ -55,21 +55,18 @@
pte_t *pte;
int err = -ENOMEM;
- spin_lock(&init_mm.page_table_lock);
-
/* Use upper 10 bits of VA to index the first level map */
pge = pgd_offset_k(va);
pue = pud_offset(pge, va);
pme = pmd_offset(pue, va);
/* Use middle 10 bits of VA to index the second-level map */
- pte = pte_alloc_kernel(&init_mm, pme, va);
+ pte = pte_alloc_kernel(pme, va);
if (pte != 0) {
err = 0;
set_pte(pte, mk_pte_phys(pa & PAGE_MASK, prot));
}
- spin_unlock(&init_mm.page_table_lock);
return err;
}
@@ -81,7 +78,7 @@
* portions of the kernel with single large page TLB entries, and
* still get unique uncached pages for consistent DMA.
*/
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
{
struct vm_struct *area;
unsigned long page, va, pa;
diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c
index 4eaec0f..2c67dfe 100644
--- a/arch/frv/mm/pgalloc.c
+++ b/arch/frv/mm/pgalloc.c
@@ -87,14 +87,14 @@
if (pgd_list)
pgd_list->private = (unsigned long) &page->index;
pgd_list = page;
- page->private = (unsigned long) &pgd_list;
+ set_page_private(page, (unsigned long)&pgd_list);
}
static inline void pgd_list_del(pgd_t *pgd)
{
struct page *next, **pprev, *page = virt_to_page(pgd);
next = (struct page *) page->index;
- pprev = (struct page **) page->private;
+ pprev = (struct page **)page_private(page);
*pprev = next;
if (next)
next->private = (unsigned long) pprev;
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
index 05c15e8..a569fe4 100644
--- a/arch/h8300/kernel/ptrace.c
+++ b/arch/h8300/kernel/ptrace.c
@@ -57,7 +57,7 @@
h8300_disable_trace(child);
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret;
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index af8c5d2..688a510 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -32,10 +32,6 @@
#define TICK_SIZE (tick_nsec / 1000)
-u64 jiffies_64;
-
-EXPORT_SYMBOL(jiffies_64);
-
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index d2703cd..5383e5e 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -5,7 +5,7 @@
mainmenu "Linux Kernel Configuration"
-config X86
+config X86_32
bool
default y
help
@@ -18,6 +18,10 @@
bool
default y
+config X86
+ bool
+ default y
+
config MMU
bool
default y
@@ -151,304 +155,7 @@
default y
depends on SMP && X86_ES7000 && MPENTIUMIII
-if !X86_ELAN
-
-choice
- prompt "Processor family"
- default M686
-
-config M386
- bool "386"
- ---help---
- This is the processor type of your CPU. This information is used for
- optimizing purposes. In order to compile a kernel that can run on
- all x86 CPU types (albeit not optimally fast), you can specify
- "386" here.
-
- The kernel will not necessarily run on earlier architectures than
- the one you have chosen, e.g. a Pentium optimized kernel will run on
- a PPro, but not necessarily on a i486.
-
- Here are the settings recommended for greatest speed:
- - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
- 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels
- will run on a 386 class machine.
- - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
- SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
- - "586" for generic Pentium CPUs lacking the TSC
- (time stamp counter) register.
- - "Pentium-Classic" for the Intel Pentium.
- - "Pentium-MMX" for the Intel Pentium MMX.
- - "Pentium-Pro" for the Intel Pentium Pro.
- - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
- - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
- - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
- - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
- - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
- - "Crusoe" for the Transmeta Crusoe series.
- - "Efficeon" for the Transmeta Efficeon series.
- - "Winchip-C6" for original IDT Winchip.
- - "Winchip-2" for IDT Winchip 2.
- - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
- - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
- - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
- - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
-
- If you don't know what to do, choose "386".
-
-config M486
- bool "486"
- help
- Select this for a 486 series processor, either Intel or one of the
- compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
- DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
- U5S.
-
-config M586
- bool "586/K5/5x86/6x86/6x86MX"
- help
- Select this for an 586 or 686 series processor such as the AMD K5,
- the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
- assume the RDTSC (Read Time Stamp Counter) instruction.
-
-config M586TSC
- bool "Pentium-Classic"
- help
- Select this for a Pentium Classic processor with the RDTSC (Read
- Time Stamp Counter) instruction for benchmarking.
-
-config M586MMX
- bool "Pentium-MMX"
- help
- Select this for a Pentium with the MMX graphics/multimedia
- extended instructions.
-
-config M686
- bool "Pentium-Pro"
- help
- Select this for Intel Pentium Pro chips. This enables the use of
- Pentium Pro extended instructions, and disables the init-time guard
- against the f00f bug found in earlier Pentiums.
-
-config MPENTIUMII
- bool "Pentium-II/Celeron(pre-Coppermine)"
- help
- Select this for Intel chips based on the Pentium-II and
- pre-Coppermine Celeron core. This option enables an unaligned
- copy optimization, compiles the kernel with optimization flags
- tailored for the chip, and applies any applicable Pentium Pro
- optimizations.
-
-config MPENTIUMIII
- bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
- help
- Select this for Intel chips based on the Pentium-III and
- Celeron-Coppermine core. This option enables use of some
- extended prefetch instructions in addition to the Pentium II
- extensions.
-
-config MPENTIUMM
- bool "Pentium M"
- help
- Select this for Intel Pentium M (not Pentium-4 M)
- notebook chips.
-
-config MPENTIUM4
- bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
- help
- Select this for Intel Pentium 4 chips. This includes the
- Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
- (not Pentium M) chips. This option enables compile flags
- optimized for the chip, uses the correct cache shift, and
- applies any applicable Pentium III optimizations.
-
-config MK6
- bool "K6/K6-II/K6-III"
- help
- Select this for an AMD K6-family processor. Enables use of
- some extended instructions, and passes appropriate optimization
- flags to GCC.
-
-config MK7
- bool "Athlon/Duron/K7"
- help
- Select this for an AMD Athlon K7-family processor. Enables use of
- some extended instructions, and passes appropriate optimization
- flags to GCC.
-
-config MK8
- bool "Opteron/Athlon64/Hammer/K8"
- help
- Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables
- use of some extended instructions, and passes appropriate optimization
- flags to GCC.
-
-config MCRUSOE
- bool "Crusoe"
- help
- Select this for a Transmeta Crusoe processor. Treats the processor
- like a 586 with TSC, and sets some GCC optimization flags (like a
- Pentium Pro with no alignment requirements).
-
-config MEFFICEON
- bool "Efficeon"
- help
- Select this for a Transmeta Efficeon processor.
-
-config MWINCHIPC6
- bool "Winchip-C6"
- help
- Select this for an IDT Winchip C6 chip. Linux and GCC
- treat this chip as a 586TSC with some extended instructions
- and alignment requirements.
-
-config MWINCHIP2
- bool "Winchip-2"
- help
- Select this for an IDT Winchip-2. Linux and GCC
- treat this chip as a 586TSC with some extended instructions
- and alignment requirements.
-
-config MWINCHIP3D
- bool "Winchip-2A/Winchip-3"
- help
- Select this for an IDT Winchip-2A or 3. Linux and GCC
- treat this chip as a 586TSC with some extended instructions
- and alignment reqirements. Also enable out of order memory
- stores for this CPU, which can increase performance of some
- operations.
-
-config MGEODEGX1
- bool "GeodeGX1"
- help
- Select this for a Geode GX1 (Cyrix MediaGX) chip.
-
-config MCYRIXIII
- bool "CyrixIII/VIA-C3"
- help
- Select this for a Cyrix III or C3 chip. Presently Linux and GCC
- treat this chip as a generic 586. Whilst the CPU is 686 class,
- it lacks the cmov extension which gcc assumes is present when
- generating 686 code.
- Note that Nehemiah (Model 9) and above will not boot with this
- kernel due to them lacking the 3DNow! instructions used in earlier
- incarnations of the CPU.
-
-config MVIAC3_2
- bool "VIA C3-2 (Nehemiah)"
- help
- Select this for a VIA C3 "Nehemiah". Selecting this enables usage
- of SSE and tells gcc to treat the CPU as a 686.
- Note, this kernel will not boot on older (pre model 9) C3s.
-
-endchoice
-
-config X86_GENERIC
- bool "Generic x86 support"
- help
- Instead of just including optimizations for the selected
- x86 variant (e.g. PII, Crusoe or Athlon), include some more
- generic optimizations as well. This will make the kernel
- perform better on x86 CPUs other than that selected.
-
- This is really intended for distributors who need more
- generic optimizations.
-
-endif
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_CMPXCHG
- bool
- depends on !M386
- default y
-
-config X86_XADD
- bool
- depends on !M386
- default y
-
-config X86_L1_CACHE_SHIFT
- int
- default "7" if MPENTIUM4 || X86_GENERIC
- default "4" if X86_ELAN || M486 || M386
- default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
- default "6" if MK7 || MK8 || MPENTIUMM
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- depends on M386
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- depends on !M386
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config X86_PPRO_FENCE
- bool
- depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
- default y
-
-config X86_F00F_BUG
- bool
- depends on M586MMX || M586TSC || M586 || M486 || M386
- default y
-
-config X86_WP_WORKS_OK
- bool
- depends on !M386
- default y
-
-config X86_INVLPG
- bool
- depends on !M386
- default y
-
-config X86_BSWAP
- bool
- depends on !M386
- default y
-
-config X86_POPAD_OK
- bool
- depends on !M386
- default y
-
-config X86_ALIGNMENT_16
- bool
- depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
- default y
-
-config X86_GOOD_APIC
- bool
- depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
- default y
-
-config X86_INTEL_USERCOPY
- bool
- depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
- default y
-
-config X86_USE_PPRO_CHECKSUM
- bool
- depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
- default y
-
-config X86_USE_3DNOW
- bool
- depends on MCYRIXIII || MK7
- default y
-
-config X86_OOSTORE
- bool
- depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
- default y
+source "arch/i386/Kconfig.cpu"
config HPET_TIMER
bool "HPET Timer Support"
@@ -561,11 +268,6 @@
depends on X86_VISWS
default y
-config X86_TSC
- bool
- depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
- default y
-
config X86_MCE
bool "Machine Check Exception"
depends on !X86_VOYAGER
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
new file mode 100644
index 0000000..53bbb3c
--- /dev/null
+++ b/arch/i386/Kconfig.cpu
@@ -0,0 +1,309 @@
+# Put here option for CPU selection and depending optimization
+if !X86_ELAN
+
+choice
+ prompt "Processor family"
+ default M686
+
+config M386
+ bool "386"
+ ---help---
+ This is the processor type of your CPU. This information is used for
+ optimizing purposes. In order to compile a kernel that can run on
+ all x86 CPU types (albeit not optimally fast), you can specify
+ "386" here.
+
+ The kernel will not necessarily run on earlier architectures than
+ the one you have chosen, e.g. a Pentium optimized kernel will run on
+ a PPro, but not necessarily on a i486.
+
+ Here are the settings recommended for greatest speed:
+ - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
+ 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels
+ will run on a 386 class machine.
+ - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
+ SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
+ - "586" for generic Pentium CPUs lacking the TSC
+ (time stamp counter) register.
+ - "Pentium-Classic" for the Intel Pentium.
+ - "Pentium-MMX" for the Intel Pentium MMX.
+ - "Pentium-Pro" for the Intel Pentium Pro.
+ - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
+ - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
+ - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
+ - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
+ - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
+ - "Crusoe" for the Transmeta Crusoe series.
+ - "Efficeon" for the Transmeta Efficeon series.
+ - "Winchip-C6" for original IDT Winchip.
+ - "Winchip-2" for IDT Winchip 2.
+ - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+ - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
+ - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
+ - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+
+ If you don't know what to do, choose "386".
+
+config M486
+ bool "486"
+ help
+ Select this for a 486 series processor, either Intel or one of the
+ compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
+ DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
+ U5S.
+
+config M586
+ bool "586/K5/5x86/6x86/6x86MX"
+ help
+ Select this for an 586 or 686 series processor such as the AMD K5,
+ the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
+ assume the RDTSC (Read Time Stamp Counter) instruction.
+
+config M586TSC
+ bool "Pentium-Classic"
+ help
+ Select this for a Pentium Classic processor with the RDTSC (Read
+ Time Stamp Counter) instruction for benchmarking.
+
+config M586MMX
+ bool "Pentium-MMX"
+ help
+ Select this for a Pentium with the MMX graphics/multimedia
+ extended instructions.
+
+config M686
+ bool "Pentium-Pro"
+ help
+ Select this for Intel Pentium Pro chips. This enables the use of
+ Pentium Pro extended instructions, and disables the init-time guard
+ against the f00f bug found in earlier Pentiums.
+
+config MPENTIUMII
+ bool "Pentium-II/Celeron(pre-Coppermine)"
+ help
+ Select this for Intel chips based on the Pentium-II and
+ pre-Coppermine Celeron core. This option enables an unaligned
+ copy optimization, compiles the kernel with optimization flags
+ tailored for the chip, and applies any applicable Pentium Pro
+ optimizations.
+
+config MPENTIUMIII
+ bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+ help
+ Select this for Intel chips based on the Pentium-III and
+ Celeron-Coppermine core. This option enables use of some
+ extended prefetch instructions in addition to the Pentium II
+ extensions.
+
+config MPENTIUMM
+ bool "Pentium M"
+ help
+ Select this for Intel Pentium M (not Pentium-4 M)
+ notebook chips.
+
+config MPENTIUM4
+ bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+ help
+ Select this for Intel Pentium 4 chips. This includes the
+ Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
+ (not Pentium M) chips. This option enables compile flags
+ optimized for the chip, uses the correct cache shift, and
+ applies any applicable Pentium III optimizations.
+
+config MK6
+ bool "K6/K6-II/K6-III"
+ help
+ Select this for an AMD K6-family processor. Enables use of
+ some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MK7
+ bool "Athlon/Duron/K7"
+ help
+ Select this for an AMD Athlon K7-family processor. Enables use of
+ some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MK8
+ bool "Opteron/Athlon64/Hammer/K8"
+ help
+ Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables
+ use of some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MCRUSOE
+ bool "Crusoe"
+ help
+ Select this for a Transmeta Crusoe processor. Treats the processor
+ like a 586 with TSC, and sets some GCC optimization flags (like a
+ Pentium Pro with no alignment requirements).
+
+config MEFFICEON
+ bool "Efficeon"
+ help
+ Select this for a Transmeta Efficeon processor.
+
+config MWINCHIPC6
+ bool "Winchip-C6"
+ help
+ Select this for an IDT Winchip C6 chip. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment requirements.
+
+config MWINCHIP2
+ bool "Winchip-2"
+ help
+ Select this for an IDT Winchip-2. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment requirements.
+
+config MWINCHIP3D
+ bool "Winchip-2A/Winchip-3"
+ help
+ Select this for an IDT Winchip-2A or 3. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment reqirements. Also enable out of order memory
+ stores for this CPU, which can increase performance of some
+ operations.
+
+config MGEODEGX1
+ bool "GeodeGX1"
+ help
+ Select this for a Geode GX1 (Cyrix MediaGX) chip.
+
+config MCYRIXIII
+ bool "CyrixIII/VIA-C3"
+ help
+ Select this for a Cyrix III or C3 chip. Presently Linux and GCC
+ treat this chip as a generic 586. Whilst the CPU is 686 class,
+ it lacks the cmov extension which gcc assumes is present when
+ generating 686 code.
+ Note that Nehemiah (Model 9) and above will not boot with this
+ kernel due to them lacking the 3DNow! instructions used in earlier
+ incarnations of the CPU.
+
+config MVIAC3_2
+ bool "VIA C3-2 (Nehemiah)"
+ help
+ Select this for a VIA C3 "Nehemiah". Selecting this enables usage
+ of SSE and tells gcc to treat the CPU as a 686.
+ Note, this kernel will not boot on older (pre model 9) C3s.
+
+endchoice
+
+config X86_GENERIC
+ bool "Generic x86 support"
+ help
+ Instead of just including optimizations for the selected
+ x86 variant (e.g. PII, Crusoe or Athlon), include some more
+ generic optimizations as well. This will make the kernel
+ perform better on x86 CPUs other than that selected.
+
+ This is really intended for distributors who need more
+ generic optimizations.
+
+endif
+
+#
+# Define implied options from the CPU selection here
+#
+config X86_CMPXCHG
+ bool
+ depends on !M386
+ default y
+
+config X86_XADD
+ bool
+ depends on !M386
+ default y
+
+config X86_L1_CACHE_SHIFT
+ int
+ default "7" if MPENTIUM4 || X86_GENERIC
+ default "4" if X86_ELAN || M486 || M386
+ default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
+ default "6" if MK7 || MK8 || MPENTIUMM
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ depends on M386
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ depends on !M386
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config X86_PPRO_FENCE
+ bool
+ depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
+ default y
+
+config X86_F00F_BUG
+ bool
+ depends on M586MMX || M586TSC || M586 || M486 || M386
+ default y
+
+config X86_WP_WORKS_OK
+ bool
+ depends on !M386
+ default y
+
+config X86_INVLPG
+ bool
+ depends on !M386
+ default y
+
+config X86_BSWAP
+ bool
+ depends on !M386
+ default y
+
+config X86_POPAD_OK
+ bool
+ depends on !M386
+ default y
+
+config X86_CMPXCHG64
+ bool
+ depends on !M386 && !M486
+ default y
+
+config X86_ALIGNMENT_16
+ bool
+ depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+ default y
+
+config X86_GOOD_APIC
+ bool
+ depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
+ default y
+
+config X86_INTEL_USERCOPY
+ bool
+ depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
+ default y
+
+config X86_USE_PPRO_CHECKSUM
+ bool
+ depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
+ default y
+
+config X86_USE_3DNOW
+ bool
+ depends on MCYRIXIII || MK7
+ default y
+
+config X86_OOSTORE
+ bool
+ depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+ default y
+
+config X86_TSC
+ bool
+ depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
+ default y
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 0995199..d121ea1 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -34,35 +34,8 @@
# prevent gcc from keeping the stack 16 byte aligned
CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
-align := $(cc-option-align)
-cflags-$(CONFIG_M386) += -march=i386
-cflags-$(CONFIG_M486) += -march=i486
-cflags-$(CONFIG_M586) += -march=i586
-cflags-$(CONFIG_M586TSC) += -march=i586
-cflags-$(CONFIG_M586MMX) += $(call cc-option,-march=pentium-mmx,-march=i586)
-cflags-$(CONFIG_M686) += -march=i686
-cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call cc-option,-mtune=pentium2)
-cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call cc-option,-mtune=pentium4)
-cflags-$(CONFIG_MK6) += -march=k6
-# Please note, that patches that add -march=athlon-xp and friends are pointless.
-# They make zero difference whatsosever to performance at this time.
-cflags-$(CONFIG_MK7) += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
-cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
-cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586)
-cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686)
-
-# AMD Elan support
-cflags-$(CONFIG_X86_ELAN) += -march=i486
-
-# Geode GX1 support
-cflags-$(CONFIG_MGEODEGX1) += $(call cc-option,-march=pentium-mmx,-march=i486)
+# CPU-specific tuning. Anything which can be shared with UML should go here.
+include $(srctree)/arch/i386/Makefile.cpu
# -mregparm=3 works ok on gcc-3.0 and later
#
diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu
new file mode 100644
index 0000000..8e51456
--- /dev/null
+++ b/arch/i386/Makefile.cpu
@@ -0,0 +1,41 @@
+# CPU tuning section - shared with UML.
+# Must change only cflags-y (or [yn]), not CFLAGS! That makes a difference for UML.
+
+#-mtune exists since gcc 3.4, and some -mcpu flavors didn't exist in gcc 2.95.
+HAS_MTUNE := $(call cc-option-yn, -mtune=i386)
+ifeq ($(HAS_MTUNE),y)
+tune = $(call cc-option,-mtune=$(1),)
+else
+tune = $(call cc-option,-mcpu=$(1),)
+endif
+
+align := $(cc-option-align)
+cflags-$(CONFIG_M386) += -march=i386
+cflags-$(CONFIG_M486) += -march=i486
+cflags-$(CONFIG_M586) += -march=i586
+cflags-$(CONFIG_M586TSC) += -march=i586
+cflags-$(CONFIG_M586MMX) += $(call cc-option,-march=pentium-mmx,-march=i586)
+cflags-$(CONFIG_M686) += -march=i686
+cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call tune,pentium2)
+cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call tune,pentium3)
+cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call tune,pentium3)
+cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call tune,pentium4)
+cflags-$(CONFIG_MK6) += -march=k6
+# Please note, that patches that add -march=athlon-xp and friends are pointless.
+# They make zero difference whatsosever to performance at this time.
+cflags-$(CONFIG_MK7) += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
+cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
+cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call tune,pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586)
+cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686)
+
+# AMD Elan support
+cflags-$(CONFIG_X86_ELAN) += -march=i486
+
+# Geode GX1 support
+cflags-$(CONFIG_MGEODEGX1) += $(call cc-option,-march=pentium-mmx,-march=i486)
+
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 5546dde..9204be6 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -803,6 +803,7 @@
void __init init_apic_mappings(void)
{
+ unsigned int orig_apicid;
unsigned long apic_phys;
/*
@@ -824,8 +825,11 @@
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ orig_apicid = boot_cpu_physical_apicid;
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ if ((orig_apicid != -1U) && (orig_apicid != boot_cpu_physical_apicid))
+ printk(KERN_WARNING "Boot APIC ID in local APIC unexpected (%d vs %d)",
+ orig_apicid, boot_cpu_physical_apicid);
#ifdef CONFIG_X86_IO_APIC
{
@@ -1046,10 +1050,11 @@
void __init setup_boot_APIC_clock(void)
{
+ unsigned long flags;
apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
using_apic_timer = 1;
- local_irq_disable();
+ local_irq_save(flags);
calibration_result = calibrate_APIC_clock();
/*
@@ -1057,7 +1062,7 @@
*/
setup_APIC_timer(calibration_result);
- local_irq_enable();
+ local_irq_restore(flags);
}
void __devinit setup_secondary_APIC_clock(void)
@@ -1254,40 +1259,81 @@
}
/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
+ * This initializes the IO-APIC and APIC hardware.
*/
-int __init APIC_init_uniprocessor (void)
+int __init APIC_init(void)
{
- if (enable_local_apic < 0)
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
-
- if (!smp_found_config && !cpu_has_apic)
+ if (enable_local_apic < 0) {
+ printk(KERN_INFO "APIC disabled\n");
return -1;
+ }
+
+ /* See if we have a SMP configuration or have forced enabled
+ * the local apic.
+ */
+ if (!smp_found_config && !acpi_lapic && !cpu_has_apic) {
+ enable_local_apic = -1;
+ return -1;
+ }
/*
- * Complain if the BIOS pretends there is one.
+ * Complain if the BIOS pretends there is an apic.
+ * Then get out because we don't have an a local apic.
*/
if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
+ printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
+ enable_local_apic = -1;
return -1;
}
verify_local_APIC();
+ /*
+ * Should not be necessary because the MP table should list the boot
+ * CPU too, but we do it for the sake of robustness anyway.
+ * Makes no sense to do this check in clustered apic mode, so skip it
+ */
+ if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+ printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
+ boot_cpu_physical_apicid);
+ physid_set(boot_cpu_physical_apicid, phys_cpu_present_map);
+ }
+
+ /*
+ * Switch from PIC to APIC mode.
+ */
connect_bsp_APIC();
-
- phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
-
setup_local_APIC();
#ifdef CONFIG_X86_IO_APIC
- if (smp_found_config)
- if (!skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
+ /*
+ * Now start the IO-APICs
+ */
+ if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
+ setup_IO_APIC();
+#endif
+ return 0;
+}
+
+void __init APIC_late_time_init(void)
+{
+ /* Improve our loops per jiffy estimate */
+ loops_per_jiffy = ((1000 + HZ - 1)/HZ)*cpu_khz;
+ boot_cpu_data.loops_per_jiffy = loops_per_jiffy;
+ cpu_data[0].loops_per_jiffy = loops_per_jiffy;
+
+ /* setup_apic_nmi_watchdog doesn't work properly before cpu_khz is
+ * initialized. So redo it here to ensure the boot cpu is setup
+ * properly.
+ */
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ setup_apic_nmi_watchdog();
+
+#ifdef CONFIG_X86_IO_APIC
+ if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
+ IO_APIC_late_time_init();
#endif
setup_boot_APIC_clock();
-
- return 0;
}
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index d7811c4..d2ef0c2 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -597,12 +597,14 @@
cpumask_t cpus;
int cpu;
struct desc_struct save_desc_40;
+ struct desc_struct *gdt;
cpus = apm_save_cpus();
cpu = get_cpu();
- save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
- per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+ gdt = get_cpu_gdt_table(cpu);
+ save_desc_40 = gdt[0x40 / 8];
+ gdt[0x40 / 8] = bad_bios_desc;
local_save_flags(flags);
APM_DO_CLI;
@@ -610,7 +612,7 @@
apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi);
APM_DO_RESTORE_SEGS;
local_irq_restore(flags);
- per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = save_desc_40;
+ gdt[0x40 / 8] = save_desc_40;
put_cpu();
apm_restore_cpus(cpus);
@@ -639,13 +641,14 @@
cpumask_t cpus;
int cpu;
struct desc_struct save_desc_40;
-
+ struct desc_struct *gdt;
cpus = apm_save_cpus();
cpu = get_cpu();
- save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
- per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+ gdt = get_cpu_gdt_table(cpu);
+ save_desc_40 = gdt[0x40 / 8];
+ gdt[0x40 / 8] = bad_bios_desc;
local_save_flags(flags);
APM_DO_CLI;
@@ -653,7 +656,7 @@
error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax);
APM_DO_RESTORE_SEGS;
local_irq_restore(flags);
- __get_cpu_var(cpu_gdt_table)[0x40 / 8] = save_desc_40;
+ gdt[0x40 / 8] = save_desc_40;
put_cpu();
apm_restore_cpus(cpus);
return error;
@@ -2295,35 +2298,36 @@
apm_bios_entry.segment = APM_CS;
for (i = 0; i < NR_CPUS; i++) {
- set_base(per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+ struct desc_struct *gdt = get_cpu_gdt_table(i);
+ set_base(gdt[APM_CS >> 3],
__va((unsigned long)apm_info.bios.cseg << 4));
- set_base(per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+ set_base(gdt[APM_CS_16 >> 3],
__va((unsigned long)apm_info.bios.cseg_16 << 4));
- set_base(per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+ set_base(gdt[APM_DS >> 3],
__va((unsigned long)apm_info.bios.dseg << 4));
#ifndef APM_RELAX_SEGMENTS
if (apm_info.bios.version == 0x100) {
#endif
/* For ASUS motherboard, Award BIOS rev 110 (and others?) */
- _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 - 1);
+ _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 - 1);
/* For some unknown machine. */
- _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], 64 * 1024 - 1);
+ _set_limit((char *)&gdt[APM_CS_16 >> 3], 64 * 1024 - 1);
/* For the DEC Hinote Ultra CT475 (and others?) */
- _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], 64 * 1024 - 1);
+ _set_limit((char *)&gdt[APM_DS >> 3], 64 * 1024 - 1);
#ifndef APM_RELAX_SEGMENTS
} else {
- _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+ _set_limit((char *)&gdt[APM_CS >> 3],
(apm_info.bios.cseg_len - 1) & 0xffff);
- _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+ _set_limit((char *)&gdt[APM_CS_16 >> 3],
(apm_info.bios.cseg_16_len - 1) & 0xffff);
- _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+ _set_limit((char *)&gdt[APM_DS >> 3],
(apm_info.bios.dseg_len - 1) & 0xffff);
/* workaround for broken BIOSes */
if (apm_info.bios.cseg_len <= apm_info.bios.offset)
- _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 -1);
+ _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 -1);
if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */
/* for the BIOS that assumes granularity = 1 */
- per_cpu(cpu_gdt_table, i)[APM_DS >> 3].b |= 0x800000;
+ gdt[APM_DS >> 3].b |= 0x800000;
printk(KERN_NOTICE "apm: we set the granularity of dseg.\n");
}
}
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 9ad43be..74145a3 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -573,6 +573,7 @@
int cpu = smp_processor_id();
struct tss_struct * t = &per_cpu(init_tss, cpu);
struct thread_struct *thread = ¤t->thread;
+ struct desc_struct *gdt = get_cpu_gdt_table(cpu);
__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
if (cpu_test_and_set(cpu, cpu_initialized)) {
@@ -594,24 +595,16 @@
* Initialize the per-CPU GDT with the boot GDT,
* and set up the GDT descriptor:
*/
- memcpy(&per_cpu(cpu_gdt_table, cpu), cpu_gdt_table,
- GDT_SIZE);
+ memcpy(gdt, cpu_gdt_table, GDT_SIZE);
/* Set up GDT entry for 16bit stack */
- *(__u64 *)&(per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_ESPFIX_SS]) |=
+ *(__u64 *)(&gdt[GDT_ENTRY_ESPFIX_SS]) |=
((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
(CPU_16BIT_STACK_SIZE - 1);
cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
- cpu_gdt_descr[cpu].address =
- (unsigned long)&per_cpu(cpu_gdt_table, cpu);
-
- /*
- * Set up the per-thread TLS descriptor cache:
- */
- memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu),
- GDT_ENTRY_TLS_ENTRIES * 8);
+ cpu_gdt_descr[cpu].address = (unsigned long)gdt;
load_gdt(&cpu_gdt_descr[cpu]);
load_idt(&idt_descr);
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 822c8ce..caa9f77 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -32,6 +32,7 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/compiler.h>
+#include <linux/sched.h> /* current */
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
index aa622d5..270f218 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -28,6 +28,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/cpumask.h>
+#include <linux/sched.h> /* current / set_cpus_allowed() */
#include <asm/processor.h>
#include <asm/msr.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 58ca98f..2d5c9ad 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -32,6 +32,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/cpumask.h>
+#include <linux/sched.h> /* for current / set_cpus_allowed() */
#include <asm/msr.h>
#include <asm/io.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index c397b62..1465974 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/config.h>
+#include <linux/sched.h> /* current */
#include <linux/delay.h>
#include <linux/compiler.h>
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index 9e0d5f8..4dc42a1 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -3,6 +3,7 @@
*
* Changes:
* Venkatesh Pallipadi : Adding cache identification through cpuid(4)
+ * Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
*/
#include <linux/init.h>
@@ -10,6 +11,7 @@
#include <linux/device.h>
#include <linux/compiler.h>
#include <linux/cpu.h>
+#include <linux/sched.h>
#include <asm/processor.h>
#include <asm/smp.h>
@@ -28,7 +30,7 @@
};
/* all the cache descriptor types we care about (no TLB or trace cache entries) */
-static struct _cache_table cache_table[] __devinitdata =
+static struct _cache_table cache_table[] __cpuinitdata =
{
{ 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */
{ 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */
@@ -117,10 +119,9 @@
cpumask_t shared_cpu_map;
};
-#define MAX_CACHE_LEAVES 4
static unsigned short num_cache_leaves;
-static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
{
unsigned int eax, ebx, ecx, edx;
union _cpuid4_leaf_eax cache_eax;
@@ -144,23 +145,18 @@
{
unsigned int eax, ebx, ecx, edx;
union _cpuid4_leaf_eax cache_eax;
- int i;
- int retval;
+ int i = -1;
- retval = MAX_CACHE_LEAVES;
- /* Do cpuid(4) loop to find out num_cache_leaves */
- for (i = 0; i < MAX_CACHE_LEAVES; i++) {
+ do {
+ ++i;
+ /* Do cpuid(4) loop to find out num_cache_leaves */
cpuid_count(4, i, &eax, &ebx, &ecx, &edx);
cache_eax.full = eax;
- if (cache_eax.split.type == CACHE_TYPE_NULL) {
- retval = i;
- break;
- }
- }
- return retval;
+ } while (cache_eax.split.type != CACHE_TYPE_NULL);
+ return i;
}
-unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
+unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
{
unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
@@ -284,13 +280,7 @@
if ( l3 )
printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
- /*
- * This assumes the L3 cache is shared; it typically lives in
- * the northbridge. The L1 caches are included by the L2
- * cache, and so should not be included for the purpose of
- * SMP switching weights.
- */
- c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+ c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d));
}
return l2;
@@ -301,7 +291,7 @@
#define CPUID4_INFO_IDX(x,y) (&((cpuid4_info[x])[y]))
#ifdef CONFIG_SMP
-static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
{
struct _cpuid4_info *this_leaf;
unsigned long num_threads_sharing;
@@ -334,7 +324,7 @@
cpuid4_info[cpu] = NULL;
}
-static int __devinit detect_cache_attributes(unsigned int cpu)
+static int __cpuinit detect_cache_attributes(unsigned int cpu)
{
struct _cpuid4_info *this_leaf;
unsigned long j;
@@ -511,7 +501,7 @@
free_cache_attributes(cpu);
}
-static int __devinit cpuid4_cache_sysfs_init(unsigned int cpu)
+static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu)
{
if (num_cache_leaves == 0)
@@ -542,7 +532,7 @@
}
/* Add/Remove cache interface for CPU device */
-static int __devinit cache_add_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
{
unsigned int cpu = sys_dev->id;
unsigned long i, j;
@@ -579,7 +569,7 @@
return retval;
}
-static int __devexit cache_remove_dev(struct sys_device * sys_dev)
+static void __cpuexit cache_remove_dev(struct sys_device * sys_dev)
{
unsigned int cpu = sys_dev->id;
unsigned long i;
@@ -588,24 +578,49 @@
kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
kobject_unregister(cache_kobject[cpu]);
cpuid4_cache_sysfs_exit(cpu);
- return 0;
+ return;
}
-static struct sysdev_driver cache_sysdev_driver = {
- .add = cache_add_dev,
- .remove = __devexit_p(cache_remove_dev),
+static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ cache_add_dev(sys_dev);
+ break;
+ case CPU_DEAD:
+ cache_remove_dev(sys_dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cacheinfo_cpu_notifier =
+{
+ .notifier_call = cacheinfo_cpu_callback,
};
-/* Register/Unregister the cpu_cache driver */
-static int __devinit cache_register_driver(void)
+static int __cpuinit cache_sysfs_init(void)
{
+ int i;
+
if (num_cache_leaves == 0)
return 0;
- return sysdev_driver_register(&cpu_sysdev_class,&cache_sysdev_driver);
+ register_cpu_notifier(&cacheinfo_cpu_notifier);
+
+ for_each_online_cpu(i) {
+ cacheinfo_cpu_callback(&cacheinfo_cpu_notifier, CPU_ONLINE,
+ (void *)(long)i);
+ }
+
+ return 0;
}
-device_initcall(cache_register_driver);
+device_initcall(cache_sysfs_init);
#endif
-
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c
index 3c035b8..979b18b 100644
--- a/arch/i386/kernel/cpu/mcheck/p6.c
+++ b/arch/i386/kernel/cpu/mcheck/p6.c
@@ -102,11 +102,16 @@
wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
- /* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
- for (i=1; i<nr_mce_banks; i++) {
+ /*
+ * Following the example in IA-32 SDM Vol 3:
+ * - MC0_CTL should not be written
+ * - Status registers on all banks should be cleared on reset
+ */
+ for (i=1; i<nr_mce_banks; i++)
wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+
+ for (i=0; i<nr_mce_banks; i++)
wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
- }
set_in_cr4 (X86_CR4_MCE);
printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c
index 1923e0a..cf39e20 100644
--- a/arch/i386/kernel/cpu/mtrr/if.c
+++ b/arch/i386/kernel/cpu/mtrr/if.c
@@ -149,60 +149,89 @@
return -EINVAL;
}
-static int
-mtrr_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long __arg)
+static long
+mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
{
- int err;
+ int err = 0;
mtrr_type type;
struct mtrr_sentry sentry;
struct mtrr_gentry gentry;
void __user *arg = (void __user *) __arg;
switch (cmd) {
+ case MTRRIOC_ADD_ENTRY:
+ case MTRRIOC_SET_ENTRY:
+ case MTRRIOC_DEL_ENTRY:
+ case MTRRIOC_KILL_ENTRY:
+ case MTRRIOC_ADD_PAGE_ENTRY:
+ case MTRRIOC_SET_PAGE_ENTRY:
+ case MTRRIOC_DEL_PAGE_ENTRY:
+ case MTRRIOC_KILL_PAGE_ENTRY:
+ if (copy_from_user(&sentry, arg, sizeof sentry))
+ return -EFAULT;
+ break;
+ case MTRRIOC_GET_ENTRY:
+ case MTRRIOC_GET_PAGE_ENTRY:
+ if (copy_from_user(&gentry, arg, sizeof gentry))
+ return -EFAULT;
+ break;
+#ifdef CONFIG_COMPAT
+ case MTRRIOC32_ADD_ENTRY:
+ case MTRRIOC32_SET_ENTRY:
+ case MTRRIOC32_DEL_ENTRY:
+ case MTRRIOC32_KILL_ENTRY:
+ case MTRRIOC32_ADD_PAGE_ENTRY:
+ case MTRRIOC32_SET_PAGE_ENTRY:
+ case MTRRIOC32_DEL_PAGE_ENTRY:
+ case MTRRIOC32_KILL_PAGE_ENTRY: {
+ struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg;
+ err = get_user(sentry.base, &s32->base);
+ err |= get_user(sentry.size, &s32->size);
+ err |= get_user(sentry.type, &s32->type);
+ if (err)
+ return err;
+ break;
+ }
+ case MTRRIOC32_GET_ENTRY:
+ case MTRRIOC32_GET_PAGE_ENTRY: {
+ struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+ err = get_user(gentry.regnum, &g32->regnum);
+ err |= get_user(gentry.base, &g32->base);
+ err |= get_user(gentry.size, &g32->size);
+ err |= get_user(gentry.type, &g32->type);
+ if (err)
+ return err;
+ break;
+ }
+#endif
+ }
+
+ switch (cmd) {
default:
return -ENOTTY;
case MTRRIOC_ADD_ENTRY:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (copy_from_user(&sentry, arg, sizeof sentry))
- return -EFAULT;
err =
mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
file, 0);
- if (err < 0)
- return err;
break;
case MTRRIOC_SET_ENTRY:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (copy_from_user(&sentry, arg, sizeof sentry))
- return -EFAULT;
err = mtrr_add(sentry.base, sentry.size, sentry.type, 0);
- if (err < 0)
- return err;
break;
case MTRRIOC_DEL_ENTRY:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (copy_from_user(&sentry, arg, sizeof sentry))
- return -EFAULT;
err = mtrr_file_del(sentry.base, sentry.size, file, 0);
- if (err < 0)
- return err;
break;
case MTRRIOC_KILL_ENTRY:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (copy_from_user(&sentry, arg, sizeof sentry))
- return -EFAULT;
err = mtrr_del(-1, sentry.base, sentry.size);
- if (err < 0)
- return err;
break;
case MTRRIOC_GET_ENTRY:
- if (copy_from_user(&gentry, arg, sizeof gentry))
- return -EFAULT;
if (gentry.regnum >= num_var_ranges)
return -EINVAL;
mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
@@ -217,60 +246,59 @@
gentry.type = type;
}
- if (copy_to_user(arg, &gentry, sizeof gentry))
- return -EFAULT;
break;
case MTRRIOC_ADD_PAGE_ENTRY:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (copy_from_user(&sentry, arg, sizeof sentry))
- return -EFAULT;
err =
mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
file, 1);
- if (err < 0)
- return err;
break;
case MTRRIOC_SET_PAGE_ENTRY:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (copy_from_user(&sentry, arg, sizeof sentry))
- return -EFAULT;
err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0);
- if (err < 0)
- return err;
break;
case MTRRIOC_DEL_PAGE_ENTRY:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (copy_from_user(&sentry, arg, sizeof sentry))
- return -EFAULT;
err = mtrr_file_del(sentry.base, sentry.size, file, 1);
- if (err < 0)
- return err;
break;
case MTRRIOC_KILL_PAGE_ENTRY:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (copy_from_user(&sentry, arg, sizeof sentry))
- return -EFAULT;
err = mtrr_del_page(-1, sentry.base, sentry.size);
- if (err < 0)
- return err;
break;
case MTRRIOC_GET_PAGE_ENTRY:
- if (copy_from_user(&gentry, arg, sizeof gentry))
- return -EFAULT;
if (gentry.regnum >= num_var_ranges)
return -EINVAL;
mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
gentry.type = type;
-
- if (copy_to_user(arg, &gentry, sizeof gentry))
- return -EFAULT;
break;
}
- return 0;
+
+ if (err)
+ return err;
+
+ switch(cmd) {
+ case MTRRIOC_GET_ENTRY:
+ case MTRRIOC_GET_PAGE_ENTRY:
+ if (copy_to_user(arg, &gentry, sizeof gentry))
+ err = -EFAULT;
+ break;
+#ifdef CONFIG_COMPAT
+ case MTRRIOC32_GET_ENTRY:
+ case MTRRIOC32_GET_PAGE_ENTRY: {
+ struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+ err = put_user(gentry.base, &g32->base);
+ err |= put_user(gentry.size, &g32->size);
+ err |= put_user(gentry.regnum, &g32->regnum);
+ err |= put_user(gentry.type, &g32->type);
+ break;
+ }
+#endif
+ }
+ return err;
}
static int
@@ -310,7 +338,8 @@
.read = seq_read,
.llseek = seq_lseek,
.write = mtrr_write,
- .ioctl = mtrr_ioctl,
+ .unlocked_ioctl = mtrr_ioctl,
+ .compat_ioctl = mtrr_ioctl,
.release = mtrr_close,
};
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
index 8bd77d9..41b871e 100644
--- a/arch/i386/kernel/cpu/proc.c
+++ b/arch/i386/kernel/cpu/proc.c
@@ -44,7 +44,7 @@
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
- "pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est",
"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c
index 4647db4..13bae79 100644
--- a/arch/i386/kernel/cpuid.c
+++ b/arch/i386/kernel/cpuid.c
@@ -163,7 +163,7 @@
int err = 0;
struct class_device *class_err;
- class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
+ class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
if (IS_ERR(class_err))
err = PTR_ERR(class_err);
return err;
diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c
index 0248e08..af809cc 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/i386/kernel/crash.c
@@ -21,7 +21,6 @@
#include <asm/hardirq.h>
#include <asm/nmi.h>
#include <asm/hw_irq.h>
-#include <asm/apic.h>
#include <mach_ipi.h>
@@ -148,7 +147,6 @@
regs = &fixed_regs;
}
crash_save_this_cpu(regs, cpu);
- disable_local_APIC();
atomic_dec(&waiting_for_crash_ipi);
/* Assume hlt works */
halt();
@@ -188,7 +186,6 @@
}
/* Leave the nmi callback set */
- disable_local_APIC();
}
#else
static void nmi_shootdown_cpus(void)
@@ -213,9 +210,5 @@
/* Make a note of crashing cpu. Will be used in NMI callback.*/
crashing_cpu = smp_processor_id();
nmi_shootdown_cpus();
- lapic_shutdown();
-#if defined(CONFIG_X86_IO_APIC)
- disable_IO_APIC();
-#endif
crash_save_self(regs);
}
diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
index 323ef8a..d86f249 100644
--- a/arch/i386/kernel/i8259.c
+++ b/arch/i386/kernel/i8259.c
@@ -435,4 +435,8 @@
setup_irq(FPU_IRQ, &fpu_irq);
irq_ctx_init(smp_processor_id());
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ APIC_init();
+#endif
}
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index fb3991e..5a77c52 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -46,6 +46,9 @@
int (*ioapic_renumber_irq)(int ioapic, int irq);
atomic_t irq_mis_count;
+/* Where if anywhere is the i8259 connect in external int mode */
+static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
+
static DEFINE_SPINLOCK(ioapic_lock);
/*
@@ -738,7 +741,7 @@
/*
* Find the pin to which IRQ[irq] (ISA) is connected
*/
-static int find_isa_irq_pin(int irq, int type)
+static int __init find_isa_irq_pin(int irq, int type)
{
int i;
@@ -758,6 +761,33 @@
return -1;
}
+static int __init find_isa_irq_apic(int irq, int type)
+{
+ int i;
+
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].mpc_srcbus;
+
+ if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+ ) &&
+ (mp_irqs[i].mpc_irqtype == type) &&
+ (mp_irqs[i].mpc_srcbusirq == irq))
+ break;
+ }
+ if (i < mp_irq_entries) {
+ int apic;
+ for(apic = 0; apic < nr_ioapics; apic++) {
+ if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+ return apic;
+ }
+ }
+
+ return -1;
+}
+
/*
* Find a specific PCI IRQ entry.
* Not an __init, possibly needed by modules
@@ -1253,7 +1283,7 @@
/*
* Set up the 8259A-master output pin:
*/
-static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
{
struct IO_APIC_route_entry entry;
unsigned long flags;
@@ -1287,8 +1317,8 @@
* Add it to the IO-APIC irq-routing table:
*/
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+ io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
spin_unlock_irqrestore(&ioapic_lock, flags);
enable_8259A_irq(0);
@@ -1595,7 +1625,8 @@
static void __init enable_IO_APIC(void)
{
union IO_APIC_reg_01 reg_01;
- int i;
+ int i8259_apic, i8259_pin;
+ int i, apic;
unsigned long flags;
for (i = 0; i < PIN_MAP_SIZE; i++) {
@@ -1609,11 +1640,52 @@
/*
* The number of IO-APIC IRQ registers (== #pins):
*/
- for (i = 0; i < nr_ioapics; i++) {
+ for (apic = 0; apic < nr_ioapics; apic++) {
spin_lock_irqsave(&ioapic_lock, flags);
- reg_01.raw = io_apic_read(i, 1);
+ reg_01.raw = io_apic_read(apic, 1);
spin_unlock_irqrestore(&ioapic_lock, flags);
- nr_ioapic_registers[i] = reg_01.bits.entries+1;
+ nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+ }
+ for(apic = 0; apic < nr_ioapics; apic++) {
+ int pin;
+ /* See if any of the pins is in ExtINT mode */
+ for(pin = 0; pin < nr_ioapic_registers[i]; pin++) {
+ struct IO_APIC_route_entry entry;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+ *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+
+ /* If the interrupt line is enabled and in ExtInt mode
+ * I have found the pin where the i8259 is connected.
+ */
+ if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
+ ioapic_i8259.apic = apic;
+ ioapic_i8259.pin = pin;
+ goto found_i8259;
+ }
+ }
+ }
+ found_i8259:
+ /* Look to see what if the MP table has reported the ExtINT */
+ /* If we could not find the appropriate pin by looking at the ioapic
+ * the i8259 probably is not connected the ioapic but give the
+ * mptable a chance anyway.
+ */
+ i8259_pin = find_isa_irq_pin(0, mp_ExtINT);
+ i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
+ /* Trust the MP table if nothing is setup in the hardware */
+ if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
+ printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+ ioapic_i8259.pin = i8259_pin;
+ ioapic_i8259.apic = i8259_apic;
+ }
+ /* Complain if the MP table and the hardware disagree */
+ if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
+ (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+ {
+ printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
}
/*
@@ -1627,7 +1699,6 @@
*/
void disable_IO_APIC(void)
{
- int pin;
/*
* Clear the IO-APIC before rebooting:
*/
@@ -1638,8 +1709,7 @@
* Put that IOAPIC in virtual wire mode
* so legacy interrupts can be delivered.
*/
- pin = find_isa_irq_pin(0, mp_ExtINT);
- if (pin != -1) {
+ if (ioapic_i8259.pin != -1) {
struct IO_APIC_route_entry entry;
unsigned long flags;
@@ -1650,7 +1720,7 @@
entry.polarity = 0; /* High */
entry.delivery_status = 0;
entry.dest_mode = 0; /* Physical */
- entry.delivery_mode = 7; /* ExtInt */
+ entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
entry.dest.physical.physical_dest = 0;
@@ -1659,11 +1729,13 @@
* Add it to the IO-APIC irq-routing table:
*/
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+ io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
+ *(((int *)&entry)+1));
+ io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
+ *(((int *)&entry)+0));
spin_unlock_irqrestore(&ioapic_lock, flags);
}
- disconnect_bsp_APIC(pin != -1);
+ disconnect_bsp_APIC(ioapic_i8259.pin != -1);
}
/*
@@ -2113,20 +2185,21 @@
*/
static inline void unlock_ExtINT_logic(void)
{
- int pin, i;
+ int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
unsigned char save_control, save_freq_select;
unsigned long flags;
- pin = find_isa_irq_pin(8, mp_INT);
+ pin = find_isa_irq_pin(8, mp_INT);
+ apic = find_isa_irq_apic(8, mp_INT);
if (pin == -1)
return;
spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
- *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+ *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+ *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
spin_unlock_irqrestore(&ioapic_lock, flags);
- clear_IO_APIC_pin(0, pin);
+ clear_IO_APIC_pin(apic, pin);
memset(&entry1, 0, sizeof(entry1));
@@ -2139,8 +2212,8 @@
entry1.vector = 0;
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
- io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+ io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+ io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
spin_unlock_irqrestore(&ioapic_lock, flags);
save_control = CMOS_READ(RTC_CONTROL);
@@ -2158,11 +2231,11 @@
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
- clear_IO_APIC_pin(0, pin);
+ clear_IO_APIC_pin(apic, pin);
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
- io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+ io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+ io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -2174,7 +2247,7 @@
*/
static inline void check_timer(void)
{
- int pin1, pin2;
+ int apic1, pin1, apic2, pin2;
int vector;
/*
@@ -2196,10 +2269,13 @@
timer_ack = 1;
enable_8259A_irq(0);
- pin1 = find_isa_irq_pin(0, mp_INT);
- pin2 = find_isa_irq_pin(0, mp_ExtINT);
+ pin1 = find_isa_irq_pin(0, mp_INT);
+ apic1 = find_isa_irq_apic(0, mp_INT);
+ pin2 = ioapic_i8259.pin;
+ apic2 = ioapic_i8259.apic;
- printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
+ printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+ vector, apic1, pin1, apic2, pin2);
if (pin1 != -1) {
/*
@@ -2216,8 +2292,9 @@
clear_IO_APIC_pin(0, pin1);
return;
}
- clear_IO_APIC_pin(0, pin1);
- printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
+ clear_IO_APIC_pin(apic1, pin1);
+ printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
+ "IO-APIC\n");
}
printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
@@ -2226,13 +2303,13 @@
/*
* legacy devices should be connected to IO APIC #0
*/
- setup_ExtINT_IRQ0_pin(pin2, vector);
+ setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
if (timer_irq_works()) {
printk("works.\n");
if (pin1 != -1)
- replace_pin_at_irq(0, 0, pin1, 0, pin2);
+ replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
else
- add_pin_to_irq(0, 0, pin2);
+ add_pin_to_irq(0, apic2, pin2);
if (nmi_watchdog == NMI_IO_APIC) {
setup_nmi();
}
@@ -2241,7 +2318,7 @@
/*
* Cleanup, just in case ...
*/
- clear_IO_APIC_pin(0, pin2);
+ clear_IO_APIC_pin(apic2, pin2);
}
printk(" failed.\n");
@@ -2310,11 +2387,15 @@
sync_Arb_IDs();
setup_IO_APIC_irqs();
init_IO_APIC_traps();
- check_timer();
if (!acpi_ioapic)
print_IO_APIC();
}
+void __init IO_APIC_late_time_init(void)
+{
+ check_timer();
+}
+
/*
* Called after all the initialization is done. If we didnt find any
* APIC bugs then we can allow the modify fast path
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
index ce66dcc..1a201a9 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/i386/kernel/irq.c
@@ -218,7 +218,7 @@
if (i == 0) {
seq_printf(p, " ");
- for_each_cpu(j)
+ for_each_online_cpu(j)
seq_printf(p, "CPU%d ",j);
seq_putc(p, '\n');
}
@@ -232,7 +232,7 @@
#ifndef CONFIG_SMP
seq_printf(p, "%10u ", kstat_irqs(i));
#else
- for_each_cpu(j)
+ for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
#endif
seq_printf(p, " %14s", irq_desc[i].handler->typename);
@@ -246,12 +246,12 @@
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
seq_printf(p, "NMI: ");
- for_each_cpu(j)
+ for_each_online_cpu(j)
seq_printf(p, "%10u ", nmi_count(j));
seq_putc(p, '\n');
#ifdef CONFIG_X86_LOCAL_APIC
seq_printf(p, "LOC: ");
- for_each_cpu(j)
+ for_each_online_cpu(j)
seq_printf(p, "%10u ",
per_cpu(irq_stat,j).apic_timer_irqs);
seq_putc(p, '\n');
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index 27aabfc..8f767d9 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -69,7 +69,7 @@
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
/* Internal processor count */
-static unsigned int __initdata num_processors;
+static unsigned int __devinitdata num_processors;
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map;
@@ -119,7 +119,7 @@
}
#endif
-static void __init MP_processor_info (struct mpc_config_processor *m)
+static void __devinit MP_processor_info (struct mpc_config_processor *m)
{
int ver, apicid;
physid_mask_t phys_cpu;
@@ -182,17 +182,6 @@
boot_cpu_physical_apicid = m->mpc_apicid;
}
- if (num_processors >= NR_CPUS) {
- printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
- " Processor ignored.\n", NR_CPUS);
- return;
- }
-
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
ver = m->mpc_apicver;
if (!MP_valid_apicid(apicid, ver)) {
@@ -201,11 +190,6 @@
return;
}
- cpu_set(num_processors, cpu_possible_map);
- num_processors++;
- phys_cpu = apicid_to_cpu_present(apicid);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
/*
* Validate version
*/
@@ -216,6 +200,25 @@
ver = 0x10;
}
apic_version[m->mpc_apicid] = ver;
+
+ phys_cpu = apicid_to_cpu_present(apicid);
+ physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+ if (num_processors >= NR_CPUS) {
+ printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+ " Processor ignored.\n", NR_CPUS);
+ return;
+ }
+
+ if (num_processors >= maxcpus) {
+ printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+ " Processor ignored.\n", maxcpus);
+ return;
+ }
+
+ cpu_set(num_processors, cpu_possible_map);
+ num_processors++;
+
if ((num_processors > 8) &&
APIC_XAPIC(ver) &&
(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL))
@@ -834,7 +837,7 @@
}
-void __init mp_register_lapic (
+void __devinit mp_register_lapic (
u8 id,
u8 enabled)
{
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
index 03100d6..44470fe 100644
--- a/arch/i386/kernel/msr.c
+++ b/arch/i386/kernel/msr.c
@@ -246,7 +246,7 @@
int err = 0;
struct class_device *class_err;
- class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
+ class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
if (IS_ERR(class_err))
err = PTR_ERR(class_err);
return err;
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
index 72515b8..d661703 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/i386/kernel/nmi.c
@@ -100,16 +100,44 @@
(P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \
P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+#ifdef CONFIG_SMP
+/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
+{
+ volatile int *endflag = data;
+ local_irq_enable();
+ /* Intentionally don't use cpu_relax here. This is
+ to make sure that the performance counter really ticks,
+ even if there is a simulator or similar that catches the
+ pause instruction. On a real HT machine this is fine because
+ all other CPUs are busy with "useless" delay loops and don't
+ care if they get somewhat less cycles. */
+ while (*endflag == 0)
+ barrier();
+}
+#endif
+
static int __init check_nmi_watchdog(void)
{
- unsigned int prev_nmi_count[NR_CPUS];
+ volatile int endflag = 0;
+ unsigned int *prev_nmi_count;
int cpu;
if (nmi_watchdog == NMI_NONE)
return 0;
+ prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+ if (!prev_nmi_count)
+ return -1;
+
printk(KERN_INFO "Testing NMI watchdog ... ");
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+
for (cpu = 0; cpu < NR_CPUS; cpu++)
prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
local_irq_enable();
@@ -123,12 +151,18 @@
continue;
#endif
if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
- printk("CPU#%d: NMI appears to be stuck!\n", cpu);
+ endflag = 1;
+ printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+ cpu,
+ prev_nmi_count[cpu],
+ nmi_count(cpu));
nmi_active = 0;
lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+ kfree(prev_nmi_count);
return -1;
}
}
+ endflag = 1;
printk("OK.\n");
/* now that we know it works we can reduce NMI frequency to
@@ -136,6 +170,7 @@
if (nmi_watchdog == NMI_LOCAL_APIC)
nmi_hz = 1;
+ kfree(prev_nmi_count);
return 0;
}
/* This needs to happen later in boot so counters are working */
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
index 7b6368b..efd11f0 100644
--- a/arch/i386/kernel/ptrace.c
+++ b/arch/i386/kernel/ptrace.c
@@ -354,7 +354,7 @@
return 0;
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
struct user * dummy = NULL;
diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c
index 1b183b3..c9b8733 100644
--- a/arch/i386/kernel/reboot_fixups.c
+++ b/arch/i386/kernel/reboot_fixups.c
@@ -44,7 +44,7 @@
for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) {
cur = &(fixups_table[i]);
- dev = pci_get_device(cur->vendor, cur->device, 0);
+ dev = pci_get_device(cur->vendor, cur->device, NULL);
if (!dev)
continue;
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 9b8c8a1..b48ac63 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -389,14 +389,24 @@
}
}
for (i = 0; i < e820.nr_map; i++) {
- if (e820.map[i].type == E820_RAM) {
- current_addr = e820.map[i].addr + e820.map[i].size;
- if (current_addr >= size) {
- e820.map[i].size -= current_addr-size;
- e820.nr_map = i + 1;
- return;
- }
+ current_addr = e820.map[i].addr + e820.map[i].size;
+ if (current_addr < size)
+ continue;
+
+ if (e820.map[i].type != E820_RAM)
+ continue;
+
+ if (e820.map[i].addr >= size) {
+ /*
+ * This region starts past the end of the
+ * requested size, skip it completely.
+ */
+ e820.nr_map = i;
+ } else {
+ e820.nr_map = i + 1;
+ e820.map[i].size -= current_addr - size;
}
+ return;
}
}
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 1fb26d0..5a2bbe0 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -87,7 +87,11 @@
cpumask_t cpu_callin_map;
cpumask_t cpu_callout_map;
EXPORT_SYMBOL(cpu_callout_map);
+#ifdef CONFIG_HOTPLUG_CPU
+cpumask_t cpu_possible_map = CPU_MASK_ALL;
+#else
cpumask_t cpu_possible_map;
+#endif
EXPORT_SYMBOL(cpu_possible_map);
static cpumask_t smp_commenced_mask;
@@ -1074,6 +1078,16 @@
EXPORT_SYMBOL(xquad_portio);
#endif
+/*
+ * Fall back to non SMP mode after errors.
+ *
+ */
+static __init void disable_smp(void)
+{
+ cpu_set(0, cpu_sibling_map[0]);
+ cpu_set(0, cpu_core_map[0]);
+}
+
static void __init smp_boot_cpus(unsigned int max_cpus)
{
int apicid, cpu, bit, kicked;
@@ -1086,7 +1100,6 @@
printk("CPU%d: ", 0);
print_cpu_info(&cpu_data[0]);
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
boot_cpu_logical_apicid = logical_smp_processor_id();
x86_cpu_to_apicid[0] = boot_cpu_physical_apicid;
@@ -1098,68 +1111,27 @@
cpus_clear(cpu_core_map[0]);
cpu_set(0, cpu_core_map[0]);
+ map_cpu_to_logical_apicid();
+
/*
* If we couldn't find an SMP configuration at boot time,
* get out of here now!
*/
if (!smp_found_config && !acpi_lapic) {
printk(KERN_NOTICE "SMP motherboard not detected.\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- if (APIC_init_uniprocessor())
- printk(KERN_NOTICE "Local APIC not detected."
- " Using dummy APIC emulation.\n");
- map_cpu_to_logical_apicid();
- cpu_set(0, cpu_sibling_map[0]);
- cpu_set(0, cpu_core_map[0]);
+ disable_smp();
return;
}
/*
- * Should not be necessary because the MP table should list the boot
- * CPU too, but we do it for the sake of robustness anyway.
- * Makes no sense to do this check in clustered apic mode, so skip it
- */
- if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
- printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
- boot_cpu_physical_apicid);
- physid_set(hard_smp_processor_id(), phys_cpu_present_map);
- }
-
- /*
- * If we couldn't find a local APIC, then get out of here now!
- */
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
- printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
- boot_cpu_physical_apicid);
- printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- cpu_set(0, cpu_sibling_map[0]);
- cpu_set(0, cpu_core_map[0]);
- return;
- }
-
- verify_local_APIC();
-
- /*
* If SMP should be disabled, then really disable it!
*/
- if (!max_cpus) {
- smp_found_config = 0;
- printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- cpu_set(0, cpu_sibling_map[0]);
- cpu_set(0, cpu_core_map[0]);
+ if (!max_cpus || (enable_local_apic < 0)) {
+ printk(KERN_INFO "SMP mode deactivated.\n");
+ disable_smp();
return;
}
- connect_bsp_APIC();
- setup_local_APIC();
- map_cpu_to_logical_apicid();
-
-
setup_portio_remap();
/*
@@ -1240,10 +1212,6 @@
cpu_set(0, cpu_sibling_map[0]);
cpu_set(0, cpu_core_map[0]);
- smpboot_setup_io_apic();
-
- setup_boot_APIC_clock();
-
/*
* Synchronize the TSC with the AP
*/
diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c
index 516bf56..8de658d 100644
--- a/arch/i386/kernel/srat.c
+++ b/arch/i386/kernel/srat.c
@@ -327,7 +327,12 @@
int tables = 0;
int i = 0;
- acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, rsdp_address);
+ if (ACPI_FAILURE(acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING,
+ rsdp_address))) {
+ printk("%s: System description tables not found\n",
+ __FUNCTION__);
+ goto out_err;
+ }
if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) {
printk("%s: assigning address to rsdp\n", __FUNCTION__);
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index 2883a4d..07471bb 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -74,10 +74,6 @@
#include "do_timer.h"
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
unsigned int cpu_khz; /* Detected as we calibrate the TSC */
EXPORT_SYMBOL(cpu_khz);
@@ -444,8 +440,8 @@
device_initcall(time_init_device);
-#ifdef CONFIG_HPET_TIMER
extern void (*late_time_init)(void);
+#ifdef CONFIG_HPET_TIMER
/* Duplicate of time_init() below, with hpet_enable part added */
static void __init hpet_time_init(void)
{
@@ -462,6 +458,11 @@
printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
time_init_hook();
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (enable_local_apic >= 0)
+ APIC_late_time_init();
+#endif
}
#endif
@@ -486,4 +487,9 @@
printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
time_init_hook();
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (enable_local_apic >= 0)
+ late_time_init = APIC_late_time_init;
+#endif
}
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
index 658c062..9caeaa3 100644
--- a/arch/i386/kernel/time_hpet.c
+++ b/arch/i386/kernel/time_hpet.c
@@ -275,6 +275,7 @@
static unsigned long PIE_count;
static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+static unsigned int hpet_t1_cmp; /* cached comparator register */
/*
* Timer 1 for RTC, we do not use periodic interrupt feature,
@@ -306,10 +307,12 @@
cnt = hpet_readl(HPET_COUNTER);
cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
hpet_writel(cnt, HPET_T1_CMP);
+ hpet_t1_cmp = cnt;
local_irq_restore(flags);
cfg = hpet_readl(HPET_T1_CFG);
- cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+ cfg &= ~HPET_TN_PERIODIC;
+ cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T1_CFG);
return 1;
@@ -319,8 +322,12 @@
{
unsigned int cfg, cnt;
- if (!(PIE_on | AIE_on | UIE_on))
+ if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
+ cfg = hpet_readl(HPET_T1_CFG);
+ cfg &= ~HPET_TN_ENABLE;
+ hpet_writel(cfg, HPET_T1_CFG);
return;
+ }
if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
hpet_rtc_int_freq = PIE_freq;
@@ -328,15 +335,10 @@
hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
/* It is more accurate to use the comparator value than current count.*/
- cnt = hpet_readl(HPET_T1_CMP);
+ cnt = hpet_t1_cmp;
cnt += hpet_tick*HZ/hpet_rtc_int_freq;
hpet_writel(cnt, HPET_T1_CMP);
-
- cfg = hpet_readl(HPET_T1_CFG);
- cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
- hpet_writel(cfg, HPET_T1_CFG);
-
- return;
+ hpet_t1_cmp = cnt;
}
/*
diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c
index d973a8b..be24272 100644
--- a/arch/i386/kernel/timers/timer_hpet.c
+++ b/arch/i386/kernel/timers/timer_hpet.c
@@ -30,23 +30,28 @@
* basic equation:
* ns = cycles / (freq / ns_per_sec)
* ns = cycles * (ns_per_sec / freq)
- * ns = cycles * (10^9 / (cpu_mhz * 10^6))
- * ns = cycles * (10^3 / cpu_mhz)
+ * ns = cycles * (10^9 / (cpu_khz * 10^3))
+ * ns = cycles * (10^6 / cpu_khz)
*
* Then we use scaling math (suggested by george@mvista.com) to get:
- * ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ * ns = cycles * (10^6 * SC / cpu_khz) / SC
* ns = cycles * cyc2ns_scale / SC
*
* And since SC is a constant power of two, we can convert the div
* into a shift.
+ *
+ * We can use khz divisor instead of mhz to keep a better percision, since
+ * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ * (mathieu.desnoyers@polymtl.ca)
+ *
* -johnstul@us.ibm.com "math is hard, lets go shopping!"
*/
static unsigned long cyc2ns_scale;
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
{
- cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+ cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
}
static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -163,7 +168,7 @@
printk("Detected %u.%03u MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
}
- set_cyc2ns_scale(cpu_khz/1000);
+ set_cyc2ns_scale(cpu_khz);
}
/* set this only when cpu_has_tsc */
timer_hpet.read_timer = read_timer_tsc;
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 6dd470c..d395e3b 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -49,23 +49,28 @@
* basic equation:
* ns = cycles / (freq / ns_per_sec)
* ns = cycles * (ns_per_sec / freq)
- * ns = cycles * (10^9 / (cpu_mhz * 10^6))
- * ns = cycles * (10^3 / cpu_mhz)
+ * ns = cycles * (10^9 / (cpu_khz * 10^3))
+ * ns = cycles * (10^6 / cpu_khz)
*
* Then we use scaling math (suggested by george@mvista.com) to get:
- * ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ * ns = cycles * (10^6 * SC / cpu_khz) / SC
* ns = cycles * cyc2ns_scale / SC
*
* And since SC is a constant power of two, we can convert the div
- * into a shift.
+ * into a shift.
+ *
+ * We can use khz divisor instead of mhz to keep a better percision, since
+ * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ * (mathieu.desnoyers@polymtl.ca)
+ *
* -johnstul@us.ibm.com "math is hard, lets go shopping!"
*/
static unsigned long cyc2ns_scale;
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
{
- cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+ cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
}
static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -286,7 +291,7 @@
if (use_tsc) {
if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
- set_cyc2ns_scale(cpu_khz/1000);
+ set_cyc2ns_scale(cpu_khz);
}
}
#endif
@@ -536,7 +541,7 @@
printk("Detected %u.%03u MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
}
- set_cyc2ns_scale(cpu_khz/1000);
+ set_cyc2ns_scale(cpu_khz);
return 0;
}
}
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 19e90bd..c34d1bf 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -488,6 +488,7 @@
tss->io_bitmap_max - thread->io_bitmap_max);
tss->io_bitmap_max = thread->io_bitmap_max;
tss->io_bitmap_base = IO_BITMAP_OFFSET;
+ tss->io_bitmap_owner = thread;
put_cpu();
return;
}
diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c
index 16b4850..fc19935 100644
--- a/arch/i386/kernel/vm86.c
+++ b/arch/i386/kernel/vm86.c
@@ -134,17 +134,16 @@
return ret;
}
-static void mark_screen_rdonly(struct task_struct * tsk)
+static void mark_screen_rdonly(struct mm_struct *mm)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
- pte_t *pte, *mapped;
+ pte_t *pte;
+ spinlock_t *ptl;
int i;
- preempt_disable();
- spin_lock(&tsk->mm->page_table_lock);
- pgd = pgd_offset(tsk->mm, 0xA0000);
+ pgd = pgd_offset(mm, 0xA0000);
if (pgd_none_or_clear_bad(pgd))
goto out;
pud = pud_offset(pgd, 0xA0000);
@@ -153,16 +152,14 @@
pmd = pmd_offset(pud, 0xA0000);
if (pmd_none_or_clear_bad(pmd))
goto out;
- pte = mapped = pte_offset_map(pmd, 0xA0000);
+ pte = pte_offset_map_lock(mm, pmd, 0xA0000, &ptl);
for (i = 0; i < 32; i++) {
if (pte_present(*pte))
set_pte(pte, pte_wrprotect(*pte));
pte++;
}
- pte_unmap(mapped);
+ pte_unmap_unlock(pte, ptl);
out:
- spin_unlock(&tsk->mm->page_table_lock);
- preempt_enable();
flush_tlb();
}
@@ -306,7 +303,7 @@
tsk->thread.screen_bitmap = info->screen_bitmap;
if (info->flags & VM86_SCREEN_BITMAP)
- mark_screen_rdonly(tsk);
+ mark_screen_rdonly(tsk->mm);
__asm__ __volatile__(
"xorl %%eax,%%eax; movl %%eax,%%fs; movl %%eax,%%gs\n\t"
"movl %0,%%esp\n\t"
diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h
index 898ed90..f1e3204 100644
--- a/arch/i386/mach-es7000/es7000.h
+++ b/arch/i386/mach-es7000/es7000.h
@@ -24,6 +24,15 @@
* http://www.unisys.com
*/
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS 0
+#define ES7000_CLASSIC 1
+#define ES7000_ZORRO 2
+
+
#define MIP_REG 1
#define MIP_PSAI_REG 4
@@ -106,6 +115,6 @@
extern int parse_unisys_oem (char *oemptr);
extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void setup_unisys ();
+extern void setup_unisys(void);
extern int es7000_start_cpu(int cpu, unsigned long eip);
extern void es7000_sw_apic(void);
diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c
index dc66605..a9ab064 100644
--- a/arch/i386/mach-es7000/es7000plat.c
+++ b/arch/i386/mach-es7000/es7000plat.c
@@ -62,6 +62,9 @@
static int
es7000_rename_gsi(int ioapic, int gsi)
{
+ if (es7000_plat == ES7000_ZORRO)
+ return gsi;
+
if (!base) {
int i;
for (i = 0; i < nr_ioapics; i++)
@@ -76,7 +79,7 @@
#endif /* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */
void __init
-setup_unisys ()
+setup_unisys(void)
{
/*
* Determine the generation of the ES7000 currently running.
@@ -86,9 +89,9 @@
*
*/
if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
- es7000_plat = 2;
+ es7000_plat = ES7000_ZORRO;
else
- es7000_plat = 1;
+ es7000_plat = ES7000_CLASSIC;
ioapic_renumber_irq = es7000_rename_gsi;
}
@@ -151,7 +154,7 @@
}
if (success < 2) {
- es7000_plat = 0;
+ es7000_plat = NON_UNISYS;
} else
setup_unisys();
return es7000_plat;
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
index 244d8ec..c4af963 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/i386/mm/discontig.c
@@ -98,7 +98,7 @@
extern unsigned long find_max_low_pfn(void);
extern void find_max_pfn(void);
-extern void one_highpage_init(struct page *, int, int);
+extern void add_one_highpage_init(struct page *, int, int);
extern struct e820map e820;
extern unsigned long init_pg_tables_end;
@@ -427,7 +427,7 @@
if (!pfn_valid(node_pfn))
continue;
page = pfn_to_page(node_pfn);
- one_highpage_init(page, node_pfn, bad_ppro);
+ add_one_highpage_init(page, node_pfn, bad_ppro);
}
}
totalram_pages += totalhigh_pages;
diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c
index 9edd448..cf572d9 100644
--- a/arch/i386/mm/fault.c
+++ b/arch/i386/mm/fault.c
@@ -108,7 +108,7 @@
desc = (void *)desc + (seg & ~7);
} else {
/* Must disable preemption while reading the GDT. */
- desc = (u32 *)&per_cpu(cpu_gdt_table, get_cpu());
+ desc = (u32 *)get_cpu_gdt_table(get_cpu());
desc = (void *)desc + (seg & ~7);
}
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index 2ebaf75..542d929 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/efi.h>
+#include <linux/memory_hotplug.h>
#include <asm/processor.h>
#include <asm/system.h>
@@ -266,17 +267,46 @@
pkmap_page_table = pte;
}
-void __init one_highpage_init(struct page *page, int pfn, int bad_ppro)
+void __devinit free_new_highpage(struct page *page)
+{
+ set_page_count(page, 1);
+ __free_page(page);
+ totalhigh_pages++;
+}
+
+void __init add_one_highpage_init(struct page *page, int pfn, int bad_ppro)
{
if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn))) {
ClearPageReserved(page);
- set_page_count(page, 1);
- __free_page(page);
- totalhigh_pages++;
+ free_new_highpage(page);
} else
SetPageReserved(page);
}
+static int add_one_highpage_hotplug(struct page *page, unsigned long pfn)
+{
+ free_new_highpage(page);
+ totalram_pages++;
+#ifdef CONFIG_FLATMEM
+ max_mapnr = max(pfn, max_mapnr);
+#endif
+ num_physpages++;
+ return 0;
+}
+
+/*
+ * Not currently handling the NUMA case.
+ * Assuming single node and all memory that
+ * has been added dynamically that would be
+ * onlined here is in HIGHMEM
+ */
+void online_page(struct page *page)
+{
+ ClearPageReserved(page);
+ add_one_highpage_hotplug(page, page_to_pfn(page));
+}
+
+
#ifdef CONFIG_NUMA
extern void set_highmem_pages_init(int);
#else
@@ -284,7 +314,7 @@
{
int pfn;
for (pfn = highstart_pfn; pfn < highend_pfn; pfn++)
- one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
+ add_one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
totalram_pages += totalhigh_pages;
}
#endif /* CONFIG_FLATMEM */
@@ -615,6 +645,28 @@
#endif
}
+/*
+ * this is for the non-NUMA, single node SMP system case.
+ * Specifically, in the case of x86, we will always add
+ * memory to the highmem for now.
+ */
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+int add_memory(u64 start, u64 size)
+{
+ struct pglist_data *pgdata = &contig_page_data;
+ struct zone *zone = pgdata->node_zones + MAX_NR_ZONES-1;
+ unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long nr_pages = size >> PAGE_SHIFT;
+
+ return __add_pages(zone, start_pfn, nr_pages);
+}
+
+int remove_memory(u64 start, u64 size)
+{
+ return -EINVAL;
+}
+#endif
+
kmem_cache_t *pgd_cache;
kmem_cache_t *pmd_cache;
diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c
index f379b8d..5d09de8 100644
--- a/arch/i386/mm/ioremap.c
+++ b/arch/i386/mm/ioremap.c
@@ -28,7 +28,7 @@
unsigned long pfn;
pfn = phys_addr >> PAGE_SHIFT;
- pte = pte_alloc_kernel(&init_mm, pmd, addr);
+ pte = pte_alloc_kernel(pmd, addr);
if (!pte)
return -ENOMEM;
do {
@@ -87,14 +87,12 @@
flush_cache_all();
phys_addr -= addr;
pgd = pgd_offset_k(addr);
- spin_lock(&init_mm.page_table_lock);
do {
next = pgd_addr_end(addr, end);
err = ioremap_pud_range(pgd, addr, next, phys_addr+addr, flags);
if (err)
break;
} while (pgd++, addr = next, addr != end);
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return err;
}
diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c
index dcdce2c..9db3242 100644
--- a/arch/i386/mm/pgtable.c
+++ b/arch/i386/mm/pgtable.c
@@ -31,11 +31,13 @@
pg_data_t *pgdat;
unsigned long i;
struct page_state ps;
+ unsigned long flags;
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_pgdat(pgdat) {
+ pgdat_resize_lock(pgdat, &flags);
for (i = 0; i < pgdat->node_spanned_pages; ++i) {
page = pgdat_page_nr(pgdat, i);
total++;
@@ -48,6 +50,7 @@
else if (page_count(page))
shared += page_count(page) - 1;
}
+ pgdat_resize_unlock(pgdat, &flags);
}
printk(KERN_INFO "%d pages of RAM\n", total);
printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
@@ -188,19 +191,19 @@
struct page *page = virt_to_page(pgd);
page->index = (unsigned long)pgd_list;
if (pgd_list)
- pgd_list->private = (unsigned long)&page->index;
+ set_page_private(pgd_list, (unsigned long)&page->index);
pgd_list = page;
- page->private = (unsigned long)&pgd_list;
+ set_page_private(page, (unsigned long)&pgd_list);
}
static inline void pgd_list_del(pgd_t *pgd)
{
struct page *next, **pprev, *page = virt_to_page(pgd);
next = (struct page *)page->index;
- pprev = (struct page **)page->private;
+ pprev = (struct page **)page_private(page);
*pprev = next;
if (next)
- next->private = (unsigned long)pprev;
+ set_page_private(next, (unsigned long)pprev);
}
void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused)
diff --git a/arch/i386/oprofile/backtrace.c b/arch/i386/oprofile/backtrace.c
index 65dfd2e..21654be 100644
--- a/arch/i386/oprofile/backtrace.c
+++ b/arch/i386/oprofile/backtrace.c
@@ -12,6 +12,7 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/ptrace.h>
+#include <asm/uaccess.h>
struct frame_head {
struct frame_head * ebp;
@@ -21,26 +22,22 @@
static struct frame_head *
dump_backtrace(struct frame_head * head)
{
- oprofile_add_trace(head->ret);
+ struct frame_head bufhead[2];
+
+ /* Also check accessibility of one struct frame_head beyond */
+ if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
+ return NULL;
+ if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
+ return NULL;
+
+ oprofile_add_trace(bufhead[0].ret);
/* frame pointers should strictly progress back up the stack
* (towards higher addresses) */
- if (head >= head->ebp)
+ if (head >= bufhead[0].ebp)
return NULL;
- return head->ebp;
-}
-
-/* check that the page(s) containing the frame head are present */
-static int pages_present(struct frame_head * head)
-{
- struct mm_struct * mm = current->mm;
-
- /* FIXME: only necessary once per page */
- if (!check_user_page_readable(mm, (unsigned long)head))
- return 0;
-
- return check_user_page_readable(mm, (unsigned long)(head + 1));
+ return bufhead[0].ebp;
}
/*
@@ -97,15 +94,6 @@
return;
}
-#ifdef CONFIG_SMP
- if (!spin_trylock(¤t->mm->page_table_lock))
- return;
-#endif
-
- while (depth-- && head && pages_present(head))
+ while (depth-- && head)
head = dump_backtrace(head);
-
-#ifdef CONFIG_SMP
- spin_unlock(¤t->mm->page_table_lock);
-#endif
}
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index 8e8e895..330fd2b 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -2,6 +2,8 @@
* Exceptions for specific devices. Usually work-arounds for fatal design flaws.
*/
+#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/init.h>
#include "pci.h"
@@ -384,3 +386,60 @@
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
+
+/*
+ * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
+ *
+ * We pretend to bring them out of full D3 state, and restore the proper
+ * IRQ, PCI cache line size, and BARs, otherwise the device won't function
+ * properly. In some cases, the device will generate an interrupt on
+ * the wrong IRQ line, causing any devices sharing the the line it's
+ * *supposed* to use to be disabled by the kernel's IRQ debug code.
+ */
+static u16 toshiba_line_size;
+
+static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = {
+ {
+ .ident = "Toshiba PS5 based laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"),
+ },
+ },
+ {
+ .ident = "Toshiba PSM4 based laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
+ },
+ },
+ { }
+};
+
+static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
+{
+ if (!dmi_check_system(toshiba_ohci1394_dmi_table))
+ return; /* only applies to certain Toshibas (so far) */
+
+ dev->current_state = PCI_D3cold;
+ pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
+ pci_pre_fixup_toshiba_ohci1394);
+
+static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
+{
+ if (!dmi_check_system(toshiba_ohci1394_dmi_table))
+ return; /* only applies to certain Toshibas (so far) */
+
+ /* Restore config space on Toshiba laptops */
+ mdelay(10);
+ pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size);
+ pci_write_config_word(dev, PCI_INTERRUPT_LINE, dev->irq);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+ pci_resource_start(dev, 0));
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
+ pci_resource_start(dev, 1));
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
+ pci_post_fixup_toshiba_ohci1394);
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index cddafe3..19e6f48 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -547,31 +547,48 @@
return 0;
}
-static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int via_router_probe(struct irq_router *r,
+ struct pci_dev *router, u16 device)
{
/* FIXME: We should move some of the quirk fixup stuff here */
- if (router->device == PCI_DEVICE_ID_VIA_82C686 &&
- device == PCI_DEVICE_ID_VIA_82C586_0) {
- /* Asus k7m bios wrongly reports 82C686A as 586-compatible */
- device = PCI_DEVICE_ID_VIA_82C686;
+ /*
+ * work arounds for some buggy BIOSes
+ */
+ if (device == PCI_DEVICE_ID_VIA_82C586_0) {
+ switch(router->device) {
+ case PCI_DEVICE_ID_VIA_82C686:
+ /*
+ * Asus k7m bios wrongly reports 82C686A
+ * as 586-compatible
+ */
+ device = PCI_DEVICE_ID_VIA_82C686;
+ break;
+ case PCI_DEVICE_ID_VIA_8235:
+ /**
+ * Asus a7v-x bios wrongly reports 8235
+ * as 586-compatible
+ */
+ device = PCI_DEVICE_ID_VIA_8235;
+ break;
+ }
}
- switch(device)
- {
- case PCI_DEVICE_ID_VIA_82C586_0:
- r->name = "VIA";
- r->get = pirq_via586_get;
- r->set = pirq_via586_set;
- return 1;
- case PCI_DEVICE_ID_VIA_82C596:
- case PCI_DEVICE_ID_VIA_82C686:
- case PCI_DEVICE_ID_VIA_8231:
+ switch(device) {
+ case PCI_DEVICE_ID_VIA_82C586_0:
+ r->name = "VIA";
+ r->get = pirq_via586_get;
+ r->set = pirq_via586_set;
+ return 1;
+ case PCI_DEVICE_ID_VIA_82C596:
+ case PCI_DEVICE_ID_VIA_82C686:
+ case PCI_DEVICE_ID_VIA_8231:
+ case PCI_DEVICE_ID_VIA_8235:
/* FIXME: add new ones for 8233/5 */
- r->name = "VIA";
- r->get = pirq_via_get;
- r->set = pirq_via_set;
- return 1;
+ r->name = "VIA";
+ r->get = pirq_via_get;
+ r->set = pirq_via_set;
+ return 1;
}
return 0;
}
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index b27c5ac..1f15726 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -51,16 +51,14 @@
__save_processor_state(&saved_context);
}
-static void
-do_fpu_end(void)
+static void do_fpu_end(void)
{
- /* restore FPU regs if necessary */
- /* Do it out of line so that gcc does not move cr0 load to some stupid place */
- kernel_fpu_end();
- mxcsr_feature_mask_init();
+ /*
+ * Restore FPU regs if necessary.
+ */
+ kernel_fpu_end();
}
-
static void fix_processor_context(void)
{
int cpu = smp_processor_id();
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 945c15a..1642375 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -63,8 +63,6 @@
select ACPI
select NUMA
select ACPI_NUMA
- select VIRTUAL_MEM_MAP
- select DISCONTIGMEM
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
@@ -176,40 +174,6 @@
default "6" if ITANIUM
# align cache-sensitive data to 64 bytes
-config NUMA
- bool "NUMA support"
- depends on !IA64_HP_SIM
- default y if IA64_SGI_SN2
- select ACPI_NUMA
- help
- Say Y to compile the kernel to support NUMA (Non-Uniform Memory
- Access). This option is for configuring high-end multiprocessor
- server systems. If in doubt, say N.
-
-config VIRTUAL_MEM_MAP
- bool "Virtual mem map"
- default y if !IA64_HP_SIM
- help
- Say Y to compile the kernel with support for a virtual mem map.
- This code also only takes effect if a memory hole of greater than
- 1 Gb is found during boot. You must turn this option on if you
- require the DISCONTIGMEM option for your machine. If you are
- unsure, say Y.
-
-config HOLES_IN_ZONE
- bool
- default y if VIRTUAL_MEM_MAP
-
-config ARCH_DISCONTIGMEM_ENABLE
- bool "Discontiguous memory support"
- depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
- default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
- help
- Say Y to support efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
-
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
@@ -232,8 +196,10 @@
based on a network adapter and DMA messaging.
config FORCE_MAX_ZONEORDER
- int
- default "18"
+ int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
+ range 11 17 if !HUGETLB_PAGE
+ default "17" if HUGETLB_PAGE
+ default "11"
config SMP
bool "Symmetric multi-processing support"
@@ -254,8 +220,8 @@
If you don't know what to do here, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-512)"
- range 2 512
+ int "Maximum number of CPUs (2-1024)"
+ range 2 1024
depends on SMP
default "64"
help
@@ -298,6 +264,58 @@
source "mm/Kconfig"
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ help
+ Say Y to support efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config NUMA
+ bool "NUMA support"
+ depends on !IA64_HP_SIM && !FLATMEM
+ default y if IA64_SGI_SN2
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server systems. If in doubt, say N.
+
+# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
+# VIRTUAL_MEM_MAP has been retained for historical reasons.
+config VIRTUAL_MEM_MAP
+ bool "Virtual mem map"
+ depends on !SPARSEMEM
+ default y if !IA64_HP_SIM
+ help
+ Say Y to compile the kernel with support for a virtual mem map.
+ This code also only takes effect if a memory hole of greater than
+ 1 Gb is found during boot. You must turn this option on if you
+ require the DISCONTIGMEM option for your machine. If you are
+ unsure, say Y.
+
+config HOLES_IN_ZONE
+ bool
+ default y if VIRTUAL_MEM_MAP
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
config IA32_SUPPORT
bool "Support for Linux/x86 binaries"
help
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 3b65cbb..b40672b 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Mon Nov 29 13:27:48 2004
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:18:49 2005
#
#
@@ -10,34 +10,40 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -58,12 +64,15 @@
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
CONFIG_ITANIUM=y
@@ -72,17 +81,30 @@
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
# CONFIG_NUMA is not set
# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -95,6 +117,7 @@
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -102,18 +125,26 @@
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
@@ -122,7 +153,7 @@
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
@@ -135,8 +166,70 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
+# Networking
#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -151,6 +244,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -163,7 +261,13 @@
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
@@ -172,14 +276,15 @@
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -189,6 +294,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -211,7 +317,8 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=m
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
@@ -233,6 +340,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -250,6 +358,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -261,6 +370,7 @@
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -274,6 +384,8 @@
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -288,18 +400,13 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
@@ -309,7 +416,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -332,11 +440,14 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -349,72 +460,14 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
@@ -422,6 +475,11 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -443,7 +501,6 @@
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -465,13 +522,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -496,6 +557,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -525,18 +588,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -554,6 +605,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -571,7 +633,6 @@
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -579,6 +640,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -603,14 +665,22 @@
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
-CONFIG_DRM=y
+CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -635,7 +705,7 @@
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -651,41 +721,16 @@
# CONFIG_I2C_PCA_ISA is not set
#
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -697,10 +742,55 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -752,11 +842,12 @@
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -768,6 +859,8 @@
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS4281=m
# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
@@ -775,9 +868,10 @@
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
@@ -791,13 +885,14 @@
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
@@ -807,6 +902,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
@@ -818,35 +915,38 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-CONFIG_USB_AUDIO=m
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_BLUETOOTH_TTY=m
-CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@@ -863,19 +963,23 @@
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
@@ -894,6 +998,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -909,7 +1014,6 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
@@ -918,10 +1022,12 @@
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -930,10 +1036,25 @@
# CONFIG_USB_GADGET is not set
#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -945,17 +1066,20 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -982,14 +1106,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1013,15 +1134,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -1031,9 +1155,11 @@
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1103,8 +1229,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
@@ -1115,14 +1245,20 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1149,6 +1285,7 @@
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -1164,3 +1301,7 @@
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
new file mode 100644
index 0000000..80f8663
--- /dev/null
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -0,0 +1,1319 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Wed Sep 28 08:27:29 2005
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_GENERIC=y
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
+CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_SMP=y
+CONFIG_NR_CPUS=512
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_SCHED_SMT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SGIIOC4=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+CONFIG_SCSI_SATA_VITESSE=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_MMTIMER=y
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND_EMU10K1=m
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_FM801=m
+# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_MTHCA=m
+# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+
+#
+# SN Devices
+#
+CONFIG_SGI_IOC4=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index d452e18..9bc8bca 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6-tiger-smp
-# Wed Aug 17 10:19:51 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:17:57 2005
#
#
@@ -16,6 +16,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -27,6 +28,7 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
@@ -103,6 +105,7 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -115,6 +118,7 @@
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -122,20 +126,27 @@
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
-# CONFIG_ACPI_HOTPLUG_CPU is not set
+CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
@@ -144,7 +155,6 @@
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -188,14 +198,19 @@
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -218,9 +233,11 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -235,6 +252,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -247,7 +269,13 @@
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
@@ -266,7 +294,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -299,7 +326,8 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
@@ -339,6 +367,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -366,6 +395,7 @@
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -454,6 +484,7 @@
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
@@ -461,6 +492,11 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -481,6 +517,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
@@ -512,6 +549,7 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -521,6 +559,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -618,6 +657,7 @@
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
@@ -675,6 +715,7 @@
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
@@ -691,7 +732,6 @@
# I2C support
#
# CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
@@ -702,6 +742,7 @@
# Hardware Monitoring support
#
CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -709,6 +750,10 @@
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -800,9 +845,11 @@
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -902,16 +949,12 @@
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -919,6 +962,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -947,13 +991,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1003,6 +1045,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1072,10 +1115,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
@@ -1089,6 +1134,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 80b0e9e..0856ca6 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Wed Aug 17 10:02:43 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:15:01 2005
#
#
@@ -18,6 +18,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -29,6 +30,7 @@
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -103,6 +105,7 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -115,6 +118,7 @@
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
@@ -122,28 +126,34 @@
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -187,8 +197,8 @@
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
@@ -204,7 +214,6 @@
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
@@ -212,6 +221,11 @@
# CONFIG_IP_NF_ARP_MANGLE is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -234,9 +248,11 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -251,6 +267,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -263,7 +284,13 @@
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
@@ -282,7 +309,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -315,7 +341,8 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
@@ -354,6 +381,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -381,6 +409,7 @@
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -457,6 +486,7 @@
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
@@ -464,6 +494,11 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -485,6 +520,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
@@ -516,6 +552,7 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -525,6 +562,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -650,12 +688,12 @@
CONFIG_AGP_HP_ZX1=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
@@ -689,7 +727,6 @@
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -703,7 +740,6 @@
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
#
# Miscellaneous I2C Chip support
@@ -730,12 +766,17 @@
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
@@ -806,6 +847,7 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_S1D13XXX is not set
@@ -862,11 +904,12 @@
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -890,7 +933,7 @@
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
@@ -952,9 +995,8 @@
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
@@ -971,6 +1013,7 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@@ -987,9 +1030,11 @@
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -1088,10 +1133,6 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1100,6 +1141,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -1126,13 +1168,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1177,6 +1217,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1246,10 +1287,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
@@ -1263,6 +1306,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 5da2081..6e3f147 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Tue Jun 21 11:30:42 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:13:03 2005
#
#
@@ -16,6 +16,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -27,6 +28,7 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
@@ -80,6 +82,10 @@
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_NUMA=y
CONFIG_VIRTUAL_MEM_MAP=y
@@ -87,12 +93,21 @@
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -105,6 +120,7 @@
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -112,30 +128,36 @@
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -147,6 +169,7 @@
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -154,6 +177,73 @@
# CONFIG_PCCARD is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -162,10 +252,15 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -178,7 +273,13 @@
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
@@ -197,7 +298,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -230,7 +330,8 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
@@ -252,6 +353,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -270,6 +372,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -297,6 +400,7 @@
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -314,6 +418,7 @@
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
@@ -335,7 +440,6 @@
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -344,6 +448,7 @@
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -390,74 +495,14 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
@@ -465,6 +510,11 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -485,6 +535,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
@@ -516,6 +567,7 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -525,6 +577,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -549,6 +602,10 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@@ -607,9 +664,7 @@
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
#
# Character devices
@@ -620,6 +675,7 @@
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
@@ -641,7 +697,6 @@
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -650,8 +705,8 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
-CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -684,6 +739,8 @@
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
@@ -708,10 +765,21 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -753,6 +821,7 @@
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@@ -764,11 +833,12 @@
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -790,9 +860,10 @@
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
@@ -844,6 +915,7 @@
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -853,9 +925,8 @@
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
@@ -888,12 +959,17 @@
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -918,7 +994,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -944,10 +1020,11 @@
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -964,6 +1041,8 @@
# InfiniBand support
#
CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
@@ -981,6 +1060,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -996,22 +1076,20 @@
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -1040,14 +1118,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1071,15 +1146,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -1094,6 +1172,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1163,10 +1242,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
@@ -1187,6 +1268,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1194,6 +1276,7 @@
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1215,7 +1298,7 @@
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 80f8ef0..a5a5637 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -17,7 +17,7 @@
#include <asm/machvec.h>
/* swiotlb declarations & definitions: */
-extern void swiotlb_init_with_default_size (size_t size);
+extern int swiotlb_late_init_with_default_size (size_t size);
extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent;
extern ia64_mv_dma_free_coherent swiotlb_free_coherent;
extern ia64_mv_dma_map_single swiotlb_map_single;
@@ -67,11 +67,20 @@
hwsw_init (void)
{
/* default to a smallish 2MB sw I/O TLB */
- swiotlb_init_with_default_size (2 * (1<<20));
+ if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) {
+#ifdef CONFIG_IA64_GENERIC
+ /* Better to have normal DMA than panic */
+ printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
+ " reverting to hpzx1 platform vector\n", __FUNCTION__);
+ machvec_init("hpzx1");
+#else
+ panic("Unable to initialize software I/O TLB services");
+#endif
+ }
}
void *
-hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
{
if (use_swiotlb(dev))
return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 1195759..bdccd0b 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1076,7 +1076,7 @@
* See Documentation/DMA-mapping.txt
*/
void *
-sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
{
struct ioc *ioc;
void *addr;
@@ -2028,10 +2028,41 @@
static int __init
sba_init(void)
{
- acpi_bus_register_driver(&acpi_sba_ioc_driver);
- if (!ioc_list)
+ if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
return 0;
+ acpi_bus_register_driver(&acpi_sba_ioc_driver);
+ if (!ioc_list) {
+#ifdef CONFIG_IA64_GENERIC
+ extern int swiotlb_late_init_with_default_size (size_t size);
+
+ /*
+ * If we didn't find something sba_iommu can claim, we
+ * need to setup the swiotlb and switch to the dig machvec.
+ */
+ if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0)
+ panic("Unable to find SBA IOMMU or initialize "
+ "software I/O TLB: Try machvec=dig boot option");
+ machvec_init("dig");
+#else
+ panic("Unable to find SBA IOMMU: Try a generic or DIG kernel");
+#endif
+ return 0;
+ }
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+ /*
+ * hpzx1_swiotlb needs to have a fairly small swiotlb bounce
+ * buffer setup to support devices with smaller DMA masks than
+ * sba_iommu can handle.
+ */
+ if (ia64_platform_is("hpzx1_swiotlb")) {
+ extern void hwsw_init(void);
+
+ hwsw_init();
+ }
+#endif
+
#ifdef CONFIG_PCI
{
struct pci_bus *b = NULL;
@@ -2048,18 +2079,6 @@
subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
-extern void dig_setup(char**);
-/*
- * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good,
- * so we use the platform_setup hook to fix it up.
- */
-void __init
-sba_setup(char **cmdline_p)
-{
- MAX_DMA_ADDRESS = ~0UL;
- dig_setup(cmdline_p);
-}
-
static int __init
nosbagart(char *str)
{
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index a18983a..a3fe975 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -205,10 +205,11 @@
char buf[512];
/*
- * This is a bit kludgey: the simulator doesn't provide a direct way of determining
- * the disk size, so we do a binary search, assuming a maximum disk size of 4GB.
+ * This is a bit kludgey: the simulator doesn't provide a
+ * direct way of determining the disk size, so we do a binary
+ * search, assuming a maximum disk size of 128GB.
*/
- for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) {
+ for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
req.addr = __pa(&buf);
req.len = sizeof(buf);
ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
@@ -225,8 +226,10 @@
{
unsigned long offset;
- offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16)
- | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512;
+ offset = (((unsigned long)sc->cmnd[2] << 24)
+ | ((unsigned long)sc->cmnd[3] << 16)
+ | ((unsigned long)sc->cmnd[4] << 8)
+ | ((unsigned long)sc->cmnd[5] << 0))*512UL;
if (sc->use_sg > 0)
simscsi_sg_readwrite(sc, mode, offset);
else
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 3fa67ec..dc28271 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -36,6 +36,7 @@
#include <linux/uio.h>
#include <linux/nfs_fs.h>
#include <linux/quota.h>
+#include <linux/syscalls.h>
#include <linux/sunrpc/svc.h>
#include <linux/nfsd/nfsd.h>
#include <linux/nfsd/cache.h>
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 7e92647..9ad94dd 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -838,7 +838,7 @@
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
#ifdef CONFIG_ACPI_NUMA
-acpi_status __devinit
+static acpi_status __devinit
acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -890,7 +890,16 @@
map_iosapic_to_node(gsi_base, node);
return AE_OK;
}
-#endif /* CONFIG_NUMA */
+
+static int __init
+acpi_map_iosapics (void)
+{
+ acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
+ return 0;
+}
+
+fs_initcall(acpi_map_iosapics);
+#endif /* CONFIG_ACPI_NUMA */
int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
{
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 768c7e4..6ade379 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -2,6 +2,7 @@
#include <linux/smp.h>
#include <linux/time.h>
#include <linux/errno.h>
+#include <linux/timex.h>
#include <asm/io.h>
/* IBM Summit (EXA) Cyclone counter code*/
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 179f230..f72ea6a 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -239,57 +239,30 @@
return 0;
}
-/*
- * Trim descriptor MD so its starts at address START_ADDR. If the descriptor covers
- * memory that is normally available to the kernel, issue a warning that some memory
- * is being ignored.
- */
-static void
-trim_bottom (efi_memory_desc_t *md, u64 start_addr)
-{
- u64 num_skipped_pages;
+typedef struct kern_memdesc {
+ u64 attribute;
+ u64 start;
+ u64 num_pages;
+} kern_memdesc_t;
- if (md->phys_addr >= start_addr || !md->num_pages)
- return;
-
- num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
- if (num_skipped_pages > md->num_pages)
- num_skipped_pages = md->num_pages;
-
- if (is_available_memory(md))
- printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
- "at 0x%lx\n", __FUNCTION__,
- (num_skipped_pages << EFI_PAGE_SHIFT) >> 10,
- md->phys_addr, start_addr - IA64_GRANULE_SIZE);
- /*
- * NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory
- * descriptor list to become unsorted. In such a case, md->num_pages will be
- * zero, so the Right Thing will happen.
- */
- md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT;
- md->num_pages -= num_skipped_pages;
-}
+static kern_memdesc_t *kern_memmap;
static void
-trim_top (efi_memory_desc_t *md, u64 end_addr)
+walk (efi_freemem_callback_t callback, void *arg, u64 attr)
{
- u64 num_dropped_pages, md_end_addr;
+ kern_memdesc_t *k;
+ u64 start, end, voff;
- md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
-
- if (md_end_addr <= end_addr || !md->num_pages)
- return;
-
- num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT;
- if (num_dropped_pages > md->num_pages)
- num_dropped_pages = md->num_pages;
-
- if (is_available_memory(md))
- printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
- "at 0x%lx\n", __FUNCTION__,
- (num_dropped_pages << EFI_PAGE_SHIFT) >> 10,
- md->phys_addr, end_addr);
- md->num_pages -= num_dropped_pages;
+ voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET;
+ for (k = kern_memmap; k->start != ~0UL; k++) {
+ if (k->attribute != attr)
+ continue;
+ start = PAGE_ALIGN(k->start);
+ end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK;
+ if (start < end)
+ if ((*callback)(start + voff, end + voff, arg) < 0)
+ return;
+ }
}
/*
@@ -299,148 +272,19 @@
void
efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
{
- int prev_valid = 0;
- struct range {
- u64 start;
- u64 end;
- } prev, curr;
- void *efi_map_start, *efi_map_end, *p, *q;
- efi_memory_desc_t *md, *check_md;
- u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0;
- unsigned long total_mem = 0;
-
- efi_map_start = __va(ia64_boot_param->efi_memmap);
- efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
- efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
- for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
- md = p;
-
- /* skip over non-WB memory descriptors; that's all we're interested in... */
- if (!(md->attribute & EFI_MEMORY_WB))
- continue;
-
- /*
- * granule_addr is the base of md's first granule.
- * [granule_addr - first_non_wb_addr) is guaranteed to
- * be contiguous WB memory.
- */
- granule_addr = GRANULEROUNDDOWN(md->phys_addr);
- first_non_wb_addr = max(first_non_wb_addr, granule_addr);
-
- if (first_non_wb_addr < md->phys_addr) {
- trim_bottom(md, granule_addr + IA64_GRANULE_SIZE);
- granule_addr = GRANULEROUNDDOWN(md->phys_addr);
- first_non_wb_addr = max(first_non_wb_addr, granule_addr);
- }
-
- for (q = p; q < efi_map_end; q += efi_desc_size) {
- check_md = q;
-
- if ((check_md->attribute & EFI_MEMORY_WB) &&
- (check_md->phys_addr == first_non_wb_addr))
- first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT;
- else
- break; /* non-WB or hole */
- }
-
- last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr);
- if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT))
- trim_top(md, last_granule_addr);
-
- if (is_available_memory(md)) {
- if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) {
- if (md->phys_addr >= max_addr)
- continue;
- md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
- first_non_wb_addr = max_addr;
- }
-
- if (total_mem >= mem_limit)
- continue;
-
- if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
- unsigned long limit_addr = md->phys_addr;
-
- limit_addr += mem_limit - total_mem;
- limit_addr = GRANULEROUNDDOWN(limit_addr);
-
- if (md->phys_addr > limit_addr)
- continue;
-
- md->num_pages = (limit_addr - md->phys_addr) >>
- EFI_PAGE_SHIFT;
- first_non_wb_addr = max_addr = md->phys_addr +
- (md->num_pages << EFI_PAGE_SHIFT);
- }
- total_mem += (md->num_pages << EFI_PAGE_SHIFT);
-
- if (md->num_pages == 0)
- continue;
-
- curr.start = PAGE_OFFSET + md->phys_addr;
- curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
-
- if (!prev_valid) {
- prev = curr;
- prev_valid = 1;
- } else {
- if (curr.start < prev.start)
- printk(KERN_ERR "Oops: EFI memory table not ordered!\n");
-
- if (prev.end == curr.start) {
- /* merge two consecutive memory ranges */
- prev.end = curr.end;
- } else {
- start = PAGE_ALIGN(prev.start);
- end = prev.end & PAGE_MASK;
- if ((end > start) && (*callback)(start, end, arg) < 0)
- return;
- prev = curr;
- }
- }
- }
- }
- if (prev_valid) {
- start = PAGE_ALIGN(prev.start);
- end = prev.end & PAGE_MASK;
- if (end > start)
- (*callback)(start, end, arg);
- }
+ walk(callback, arg, EFI_MEMORY_WB);
}
/*
- * Walk the EFI memory map to pull out leftover pages in the lower
- * memory regions which do not end up in the regular memory map and
- * stick them into the uncached allocator
- *
- * The regular walk function is significantly more complex than the
- * uncached walk which means it really doesn't make sense to try and
- * marge the two.
+ * Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that
+ * has memory that is available for uncached allocator.
*/
-void __init
-efi_memmap_walk_uc (efi_freemem_callback_t callback)
+void
+efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg)
{
- void *efi_map_start, *efi_map_end, *p;
- efi_memory_desc_t *md;
- u64 efi_desc_size, start, end;
-
- efi_map_start = __va(ia64_boot_param->efi_memmap);
- efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
- efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
- for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
- md = p;
- if (md->attribute == EFI_MEMORY_UC) {
- start = PAGE_ALIGN(md->phys_addr);
- end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK);
- if ((*callback)(start, end, NULL) < 0)
- return;
- }
- }
+ walk(callback, arg, EFI_MEMORY_UC);
}
-
/*
* Look for the PAL_CODE region reported by EFI and maps it using an
* ITR to enable safe PAL calls in virtual mode. See IA-64 Processor
@@ -862,3 +706,307 @@
printk(KERN_ERR "Malformed %s value\n", name);
return 0;
}
+
+#define efi_md_size(md) (md->num_pages << EFI_PAGE_SHIFT)
+
+static inline u64
+kmd_end(kern_memdesc_t *kmd)
+{
+ return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT));
+}
+
+static inline u64
+efi_md_end(efi_memory_desc_t *md)
+{
+ return (md->phys_addr + efi_md_size(md));
+}
+
+static inline int
+efi_wb(efi_memory_desc_t *md)
+{
+ return (md->attribute & EFI_MEMORY_WB);
+}
+
+static inline int
+efi_uc(efi_memory_desc_t *md)
+{
+ return (md->attribute & EFI_MEMORY_UC);
+}
+
+/*
+ * Look for the first granule aligned memory descriptor memory
+ * that is big enough to hold EFI memory map. Make sure this
+ * descriptor is atleast granule sized so it does not get trimmed
+ */
+struct kern_memdesc *
+find_memmap_space (void)
+{
+ u64 contig_low=0, contig_high=0;
+ u64 as = 0, ae;
+ void *efi_map_start, *efi_map_end, *p, *q;
+ efi_memory_desc_t *md, *pmd = NULL, *check_md;
+ u64 space_needed, efi_desc_size;
+ unsigned long total_mem = 0;
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ /*
+ * Worst case: we need 3 kernel descriptors for each efi descriptor
+ * (if every entry has a WB part in the middle, and UC head and tail),
+ * plus one for the end marker.
+ */
+ space_needed = sizeof(kern_memdesc_t) *
+ (3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1);
+
+ for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+ md = p;
+ if (!efi_wb(md)) {
+ continue;
+ }
+ if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+ contig_low = GRANULEROUNDUP(md->phys_addr);
+ contig_high = efi_md_end(md);
+ for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+ check_md = q;
+ if (!efi_wb(check_md))
+ break;
+ if (contig_high != check_md->phys_addr)
+ break;
+ contig_high = efi_md_end(check_md);
+ }
+ contig_high = GRANULEROUNDDOWN(contig_high);
+ }
+ if (!is_available_memory(md) || md->type == EFI_LOADER_DATA)
+ continue;
+
+ /* Round ends inward to granule boundaries */
+ as = max(contig_low, md->phys_addr);
+ ae = min(contig_high, efi_md_end(md));
+
+ /* keep within max_addr= command line arg */
+ ae = min(ae, max_addr);
+ if (ae <= as)
+ continue;
+
+ /* avoid going over mem= command line arg */
+ if (total_mem + (ae - as) > mem_limit)
+ ae -= total_mem + (ae - as) - mem_limit;
+
+ if (ae <= as)
+ continue;
+
+ if (ae - as > space_needed)
+ break;
+ }
+ if (p >= efi_map_end)
+ panic("Can't allocate space for kernel memory descriptors");
+
+ return __va(as);
+}
+
+/*
+ * Walk the EFI memory map and gather all memory available for kernel
+ * to use. We can allocate partial granules only if the unavailable
+ * parts exist, and are WB.
+ */
+void
+efi_memmap_init(unsigned long *s, unsigned long *e)
+{
+ struct kern_memdesc *k, *prev = 0;
+ u64 contig_low=0, contig_high=0;
+ u64 as, ae, lim;
+ void *efi_map_start, *efi_map_end, *p, *q;
+ efi_memory_desc_t *md, *pmd = NULL, *check_md;
+ u64 efi_desc_size;
+ unsigned long total_mem = 0;
+
+ k = kern_memmap = find_memmap_space();
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+ md = p;
+ if (!efi_wb(md)) {
+ if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY ||
+ md->type == EFI_BOOT_SERVICES_DATA)) {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = md->phys_addr;
+ k->num_pages = md->num_pages;
+ k++;
+ }
+ continue;
+ }
+ if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+ contig_low = GRANULEROUNDUP(md->phys_addr);
+ contig_high = efi_md_end(md);
+ for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+ check_md = q;
+ if (!efi_wb(check_md))
+ break;
+ if (contig_high != check_md->phys_addr)
+ break;
+ contig_high = efi_md_end(check_md);
+ }
+ contig_high = GRANULEROUNDDOWN(contig_high);
+ }
+ if (!is_available_memory(md))
+ continue;
+
+ /*
+ * Round ends inward to granule boundaries
+ * Give trimmings to uncached allocator
+ */
+ if (md->phys_addr < contig_low) {
+ lim = min(efi_md_end(md), contig_low);
+ if (efi_uc(md)) {
+ if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC &&
+ kmd_end(k-1) == md->phys_addr) {
+ (k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+ } else {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = md->phys_addr;
+ k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+ k++;
+ }
+ }
+ as = contig_low;
+ } else
+ as = md->phys_addr;
+
+ if (efi_md_end(md) > contig_high) {
+ lim = max(md->phys_addr, contig_high);
+ if (efi_uc(md)) {
+ if (lim == md->phys_addr && k > kern_memmap &&
+ (k-1)->attribute == EFI_MEMORY_UC &&
+ kmd_end(k-1) == md->phys_addr) {
+ (k-1)->num_pages += md->num_pages;
+ } else {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = lim;
+ k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT;
+ k++;
+ }
+ }
+ ae = contig_high;
+ } else
+ ae = efi_md_end(md);
+
+ /* keep within max_addr= command line arg */
+ ae = min(ae, max_addr);
+ if (ae <= as)
+ continue;
+
+ /* avoid going over mem= command line arg */
+ if (total_mem + (ae - as) > mem_limit)
+ ae -= total_mem + (ae - as) - mem_limit;
+
+ if (ae <= as)
+ continue;
+ if (prev && kmd_end(prev) == md->phys_addr) {
+ prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT;
+ total_mem += ae - as;
+ continue;
+ }
+ k->attribute = EFI_MEMORY_WB;
+ k->start = as;
+ k->num_pages = (ae - as) >> EFI_PAGE_SHIFT;
+ total_mem += ae - as;
+ prev = k++;
+ }
+ k->start = ~0L; /* end-marker */
+
+ /* reserve the memory we are using for kern_memmap */
+ *s = (u64)kern_memmap;
+ *e = (u64)++k;
+}
+
+void
+efi_initialize_iomem_resources(struct resource *code_resource,
+ struct resource *data_resource)
+{
+ struct resource *res;
+ void *efi_map_start, *efi_map_end, *p;
+ efi_memory_desc_t *md;
+ u64 efi_desc_size;
+ char *name;
+ unsigned long flags;
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ res = NULL;
+
+ for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
+ md = p;
+
+ if (md->num_pages == 0) /* should not happen */
+ continue;
+
+ flags = IORESOURCE_MEM;
+ switch (md->type) {
+
+ case EFI_MEMORY_MAPPED_IO:
+ case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+ continue;
+
+ case EFI_LOADER_CODE:
+ case EFI_LOADER_DATA:
+ case EFI_BOOT_SERVICES_DATA:
+ case EFI_BOOT_SERVICES_CODE:
+ case EFI_CONVENTIONAL_MEMORY:
+ if (md->attribute & EFI_MEMORY_WP) {
+ name = "System ROM";
+ flags |= IORESOURCE_READONLY;
+ } else {
+ name = "System RAM";
+ }
+ break;
+
+ case EFI_ACPI_MEMORY_NVS:
+ name = "ACPI Non-volatile Storage";
+ flags |= IORESOURCE_BUSY;
+ break;
+
+ case EFI_UNUSABLE_MEMORY:
+ name = "reserved";
+ flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED;
+ break;
+
+ case EFI_RESERVED_TYPE:
+ case EFI_RUNTIME_SERVICES_CODE:
+ case EFI_RUNTIME_SERVICES_DATA:
+ case EFI_ACPI_RECLAIM_MEMORY:
+ default:
+ name = "reserved";
+ flags |= IORESOURCE_BUSY;
+ break;
+ }
+
+ if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) {
+ printk(KERN_ERR "failed to alocate resource for iomem\n");
+ return;
+ }
+
+ res->name = name;
+ res->start = md->phys_addr;
+ res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+ res->flags = flags;
+
+ if (insert_resource(&iomem_resource, res) < 0)
+ kfree(res);
+ else {
+ /*
+ * We don't know which region contains
+ * kernel data so we try it repeatedly and
+ * let the resource manager test it.
+ */
+ insert_resource(res, code_resource);
+ insert_resource(res, data_resource);
+ }
+ }
+}
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 205d980..d33244c 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -57,9 +57,9 @@
if (i == 0) {
seq_printf(p, " ");
- for (j=0; j<NR_CPUS; j++)
- if (cpu_online(j))
- seq_printf(p, "CPU%d ",j);
+ for_each_online_cpu(j) {
+ seq_printf(p, "CPU%d ",j);
+ }
seq_putc(p, '\n');
}
@@ -72,9 +72,9 @@
#ifndef CONFIG_SMP
seq_printf(p, "%10u ", kstat_irqs(i));
#else
- for (j = 0; j < NR_CPUS; j++)
- if (cpu_online(j))
- seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+ for_each_online_cpu(j) {
+ seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+ }
#endif
seq_printf(p, " %14s", irq_desc[i].handler->typename);
seq_printf(p, " %s", action->name);
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index d0a5106..52c47da 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -508,9 +508,7 @@
int cpu;
/* Clear the Rendez checkin flag for all cpus */
- for(cpu = 0; cpu < NR_CPUS; cpu++) {
- if (!cpu_online(cpu))
- continue;
+ for_each_online_cpu(cpu) {
if (ia64_mc_info.imi_rendez_checkin[cpu] == IA64_MCA_RENDEZ_CHECKIN_DONE)
ia64_mca_wakeup(cpu);
}
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index f1aca7c..7a2f0a7 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -947,8 +947,8 @@
percpu_modcopy (void *pcpudst, const void *src, unsigned long size)
{
unsigned int i;
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_possible(i))
- memcpy(pcpudst + __per_cpu_offset[i], src, size);
+ for_each_cpu(i) {
+ memcpy(pcpudst + __per_cpu_offset[i], src, size);
+ }
}
#endif /* CONFIG_SMP */
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index 367804a..6a4ac7d 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -64,22 +64,30 @@
void
ia64_patch_imm64 (u64 insn_addr, u64 val)
{
- ia64_patch(insn_addr,
+ /* The assembler may generate offset pointing to either slot 1
+ or slot 2 for a long (2-slot) instruction, occupying slots 1
+ and 2. */
+ insn_addr &= -16UL;
+ ia64_patch(insn_addr + 2,
0x01fffefe000UL, ( ((val & 0x8000000000000000UL) >> 27) /* bit 63 -> 36 */
| ((val & 0x0000000000200000UL) << 0) /* bit 21 -> 21 */
| ((val & 0x00000000001f0000UL) << 6) /* bit 16 -> 22 */
| ((val & 0x000000000000ff80UL) << 20) /* bit 7 -> 27 */
| ((val & 0x000000000000007fUL) << 13) /* bit 0 -> 13 */));
- ia64_patch(insn_addr - 1, 0x1ffffffffffUL, val >> 22);
+ ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22);
}
void
ia64_patch_imm60 (u64 insn_addr, u64 val)
{
- ia64_patch(insn_addr,
+ /* The assembler may generate offset pointing to either slot 1
+ or slot 2 for a long (2-slot) instruction, occupying slots 1
+ and 2. */
+ insn_addr &= -16UL;
+ ia64_patch(insn_addr + 2,
0x011ffffe000UL, ( ((val & 0x0800000000000000UL) >> 23) /* bit 59 -> 36 */
| ((val & 0x00000000000fffffUL) << 13) /* bit 0 -> 13 */));
- ia64_patch(insn_addr - 1, 0x1fffffffffcUL, val >> 18);
+ ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18);
}
/*
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index d71731e..f7dfc10 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2352,7 +2352,8 @@
insert_vm_struct(mm, vma);
mm->total_vm += size >> PAGE_SHIFT;
- vm_stat_account(vma);
+ vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
+ vma_pages(vma));
up_write(&task->mm->mmap_sem);
/*
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index bbb8bc7..4b19d04 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -587,8 +587,9 @@
static struct task_struct *
find_thread_for_addr (struct task_struct *child, unsigned long addr)
{
- struct task_struct *g, *p;
+ struct task_struct *p;
struct mm_struct *mm;
+ struct list_head *this, *next;
int mm_users;
if (!(mm = get_task_mm(child)))
@@ -600,28 +601,21 @@
goto out; /* not multi-threaded */
/*
- * First, traverse the child's thread-list. Good for scalability with
- * NPTL-threads.
+ * Traverse the current process' children list. Every task that
+ * one attaches to becomes a child. And it is only attached children
+ * of the debugger that are of interest (ptrace_check_attach checks
+ * for this).
*/
- p = child;
- do {
- if (thread_matches(p, addr)) {
- child = p;
- goto out;
- }
- if (mm_users-- <= 1)
- goto out;
- } while ((p = next_thread(p)) != child);
-
- do_each_thread(g, p) {
- if (child->mm != mm)
+ list_for_each_safe(this, next, ¤t->children) {
+ p = list_entry(this, struct task_struct, sibling);
+ if (p->mm != mm)
continue;
-
if (thread_matches(p, addr)) {
child = p;
goto out;
}
- } while_each_thread(g, p);
+ }
+
out:
mmput(mm);
return child;
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 1f5c26d..fc56ca2 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -78,6 +78,19 @@
unsigned long vga_console_iobase;
unsigned long vga_console_membase;
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+extern void efi_initialize_iomem_resources(struct resource *,
+ struct resource *);
+extern char _text[], _end[], _etext[];
+
unsigned long ia64_max_cacheline_size;
unsigned long ia64_iobase; /* virtual address for I/O accesses */
EXPORT_SYMBOL(ia64_iobase);
@@ -171,6 +184,22 @@
}
}
+/*
+ * Request address space for all standard resources
+ */
+static int __init register_memory(void)
+{
+ code_resource.start = ia64_tpa(_text);
+ code_resource.end = ia64_tpa(_etext) - 1;
+ data_resource.start = ia64_tpa(_etext);
+ data_resource.end = ia64_tpa(_end) - 1;
+ efi_initialize_iomem_resources(&code_resource, &data_resource);
+
+ return 0;
+}
+
+__initcall(register_memory);
+
/**
* reserve_memory - setup reserved memory areas
*
@@ -211,6 +240,9 @@
}
#endif
+ efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
+ n++;
+
/* end of memory marker */
rsvd_region[n].start = ~0UL;
rsvd_region[n].end = ~0UL;
@@ -244,28 +276,31 @@
static void __init
io_port_init (void)
{
- extern unsigned long ia64_iobase;
unsigned long phys_iobase;
/*
- * Set `iobase' to the appropriate address in region 6 (uncached access range).
+ * Set `iobase' based on the EFI memory map or, failing that, the
+ * value firmware left in ar.k0.
*
- * The EFI memory map is the "preferred" location to get the I/O port space base,
- * rather the relying on AR.KR0. This should become more clear in future SAL
- * specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
- * found in the memory map.
+ * Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute
+ * the port's virtual address, so ia32_load_state() loads it with a
+ * user virtual address. But in ia64 mode, glibc uses the
+ * *physical* address in ar.k0 to mmap the appropriate area from
+ * /dev/mem, and the inX()/outX() interfaces use MMIO. In both
+ * cases, user-mode can only use the legacy 0-64K I/O port space.
+ *
+ * ar.k0 is not involved in kernel I/O port accesses, which can use
+ * any of the I/O port spaces and are done via MMIO using the
+ * virtual mmio_base from the appropriate io_space[].
*/
phys_iobase = efi_get_iobase();
- if (phys_iobase)
- /* set AR.KR0 since this is all we use it for anyway */
- ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
- else {
+ if (!phys_iobase) {
phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
- printk(KERN_INFO "No I/O port range found in EFI memory map, falling back "
- "to AR.KR0\n");
- printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase);
+ printk(KERN_INFO "No I/O port range found in EFI memory map, "
+ "falling back to AR.KR0 (0x%lx)\n", phys_iobase);
}
ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
+ ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
/* setup legacy IO port space */
io_space[0].mmio_base = ia64_iobase;
@@ -526,7 +561,7 @@
c->itc_freq / 1000000, c->itc_freq % 1000000,
lpj*HZ/500000, (lpj*HZ/5000) % 100);
#ifdef CONFIG_SMP
- seq_printf(m, "siblings : %u\n", c->num_log);
+ seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum]));
if (c->threads_per_core > 1 || c->cores_per_socket > 1)
seq_printf(m,
"physical id: %u\n"
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 0166a98..657ac99 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -185,8 +185,8 @@
{
unsigned int i;
- for (i = 0; i < NR_CPUS; i++) {
- if (cpu_online(i) && i != smp_processor_id())
+ for_each_online_cpu(i) {
+ if (i != smp_processor_id())
send_IPI_single(i, op);
}
}
@@ -199,9 +199,9 @@
{
int i;
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_online(i))
- send_IPI_single(i, op);
+ for_each_online_cpu(i) {
+ send_IPI_single(i, op);
+ }
}
/*
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 7d72c0d..400a489 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -694,9 +694,9 @@
* Allow the user to impress friends.
*/
- for (cpu = 0; cpu < NR_CPUS; cpu++)
- if (cpu_online(cpu))
- bogosum += cpu_data(cpu)->loops_per_jiffy;
+ for_each_online_cpu(cpu) {
+ bogosum += cpu_data(cpu)->loops_per_jiffy;
+ }
printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
(int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 8b8a5a4..5b7e736 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -32,10 +32,6 @@
extern unsigned long wall_jiffies;
-u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
#define TIME_KEEPER_ID 0 /* smp_processor_id() of time-keeper */
#ifdef CONFIG_IA64_DEBUG_IRQ
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index 4e9d06c..c6d4044 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -205,23 +205,18 @@
static int __init
uncached_build_memmap(unsigned long start, unsigned long end, void *arg)
{
- long length;
- unsigned long vstart, vend;
+ long length = end - start;
int node;
- length = end - start;
- vstart = start + __IA64_UNCACHED_OFFSET;
- vend = end + __IA64_UNCACHED_OFFSET;
-
dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end);
- memset((char *)vstart, 0, length);
+ memset((char *)start, 0, length);
- node = paddr_to_nid(start);
+ node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET);
- for (; vstart < vend ; vstart += PAGE_SIZE) {
- dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart);
- gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE);
+ for (; start < end ; start += PAGE_SIZE) {
+ dprintk(KERN_INFO "sticking %lx into the pool!\n", start);
+ gen_pool_free(uncached_pool[node], start, PAGE_SIZE);
}
return 0;
diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c
index a604efc..96edcc0 100644
--- a/arch/ia64/lib/swiotlb.c
+++ b/arch/ia64/lib/swiotlb.c
@@ -49,6 +49,15 @@
*/
#define IO_TLB_SHIFT 11
+#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
+
+/*
+ * Minimum IO TLB size to bother booting with. Systems with mainly
+ * 64bit capable cards will only lightly use the swiotlb. If we can't
+ * allocate a contiguous 1MB, we're probably in trouble anyway.
+ */
+#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
+
int swiotlb_force;
/*
@@ -154,6 +163,99 @@
swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */
}
+/*
+ * Systems with larger DMA zones (those that don't support ISA) can
+ * initialize the swiotlb later using the slab allocator if needed.
+ * This should be just like above, but with some error catching.
+ */
+int
+swiotlb_late_init_with_default_size (size_t default_size)
+{
+ unsigned long i, req_nslabs = io_tlb_nslabs;
+ unsigned int order;
+
+ if (!io_tlb_nslabs) {
+ io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
+ io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
+ }
+
+ /*
+ * Get IO TLB memory from the low pages
+ */
+ order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ io_tlb_nslabs = SLABS_PER_PAGE << order;
+
+ while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
+ io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
+ order);
+ if (io_tlb_start)
+ break;
+ order--;
+ }
+
+ if (!io_tlb_start)
+ goto cleanup1;
+
+ if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) {
+ printk(KERN_WARNING "Warning: only able to allocate %ld MB "
+ "for software IO TLB\n", (PAGE_SIZE << order) >> 20);
+ io_tlb_nslabs = SLABS_PER_PAGE << order;
+ }
+ io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
+ memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+
+ /*
+ * Allocate and initialize the free list array. This array is used
+ * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
+ * between io_tlb_start and io_tlb_end.
+ */
+ io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
+ get_order(io_tlb_nslabs * sizeof(int)));
+ if (!io_tlb_list)
+ goto cleanup2;
+
+ for (i = 0; i < io_tlb_nslabs; i++)
+ io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
+ io_tlb_index = 0;
+
+ io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL,
+ get_order(io_tlb_nslabs * sizeof(char *)));
+ if (!io_tlb_orig_addr)
+ goto cleanup3;
+
+ memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *));
+
+ /*
+ * Get the overflow emergency buffer
+ */
+ io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
+ get_order(io_tlb_overflow));
+ if (!io_tlb_overflow_buffer)
+ goto cleanup4;
+
+ printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - "
+ "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20,
+ virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
+
+ return 0;
+
+cleanup4:
+ free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs *
+ sizeof(char *)));
+ io_tlb_orig_addr = NULL;
+cleanup3:
+ free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
+ sizeof(int)));
+ io_tlb_list = NULL;
+ io_tlb_end = NULL;
+cleanup2:
+ free_pages((unsigned long)io_tlb_start, order);
+ io_tlb_start = NULL;
+cleanup1:
+ io_tlb_nslabs = req_nslabs;
+ return -ENOMEM;
+}
+
static inline int
address_needs_mapping(struct device *hwdev, dma_addr_t addr)
{
@@ -314,7 +416,7 @@
void *
swiotlb_alloc_coherent(struct device *hwdev, size_t size,
- dma_addr_t *dma_handle, int flags)
+ dma_addr_t *dma_handle, gfp_t flags)
{
unsigned long dev_addr;
void *ret;
diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile
index 7078f67..d78d20f 100644
--- a/arch/ia64/mm/Makefile
+++ b/arch/ia64/mm/Makefile
@@ -7,6 +7,5 @@
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
-ifndef CONFIG_DISCONTIGMEM
-obj-y += contig.o
-endif
+obj-$(CONFIG_SPARSEMEM) += discontig.o
+obj-$(CONFIG_FLATMEM) += contig.o
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 91a055f..acaaec4 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -269,7 +269,7 @@
efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
if (max_gap < LARGE_GAP) {
vmem_map = (struct page *) 0;
- free_area_init_node(0, &contig_page_data, zones_size, 0,
+ free_area_init_node(0, NODE_DATA(0), zones_size, 0,
zholes_size);
} else {
unsigned long map_size;
@@ -282,7 +282,7 @@
efi_memmap_walk(create_mem_map_page_table, NULL);
NODE_DATA(0)->node_mem_map = vmem_map;
- free_area_init_node(0, &contig_page_data, zones_size,
+ free_area_init_node(0, NODE_DATA(0), zones_size,
0, zholes_size);
printk("Virtual mem_map starts at 0x%p\n", mem_map);
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index b5c90e5..a88cdb7 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -421,6 +421,37 @@
return;
}
+#ifdef CONFIG_SPARSEMEM
+/**
+ * register_sparse_mem - notify SPARSEMEM that this memory range exists.
+ * @start: physical start of range
+ * @end: physical end of range
+ * @arg: unused
+ *
+ * Simply calls SPARSEMEM to register memory section(s).
+ */
+static int __init register_sparse_mem(unsigned long start, unsigned long end,
+ void *arg)
+{
+ int nid;
+
+ start = __pa(start) >> PAGE_SHIFT;
+ end = __pa(end) >> PAGE_SHIFT;
+ nid = early_pfn_to_nid(start);
+ memory_present(nid, start, end);
+
+ return 0;
+}
+
+static void __init arch_sparse_init(void)
+{
+ efi_memmap_walk(register_sparse_mem, NULL);
+ sparse_init();
+}
+#else
+#define arch_sparse_init() do {} while (0)
+#endif
+
/**
* find_memory - walk the EFI memory map and setup the bootmem allocator
*
@@ -524,12 +555,18 @@
show_free_areas();
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_pgdat(pgdat) {
- unsigned long present = pgdat->node_present_pages;
+ unsigned long present;
+ unsigned long flags;
int shared = 0, cached = 0, reserved = 0;
+
printk("Node ID: %d\n", pgdat->node_id);
+ pgdat_resize_lock(pgdat, &flags);
+ present = pgdat->node_present_pages;
for(i = 0; i < pgdat->node_spanned_pages; i++) {
- struct page *page = pgdat_page_nr(pgdat, i);
- if (!ia64_pfn_valid(pgdat->node_start_pfn+i))
+ struct page *page;
+ if (pfn_valid(pgdat->node_start_pfn + i))
+ page = pfn_to_page(pgdat->node_start_pfn + i);
+ else
continue;
if (PageReserved(page))
reserved++;
@@ -538,6 +575,7 @@
else if (page_count(page))
shared += page_count(page)-1;
}
+ pgdat_resize_unlock(pgdat, &flags);
total_present += present;
total_reserved += reserved;
total_cached += cached;
@@ -648,12 +686,16 @@
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ arch_sparse_init();
+
efi_memmap_walk(filter_rsvd_memory, count_node_pages);
+#ifdef CONFIG_VIRTUAL_MEM_MAP
vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page));
vmem_map = (struct page *) vmalloc_end;
efi_memmap_walk(create_mem_map_page_table, NULL);
printk("Virtual mem_map starts at 0x%p\n", vmem_map);
+#endif
for_each_online_node(node) {
memset(zones_size, 0, sizeof(zones_size));
@@ -690,7 +732,9 @@
pfn_offset = mem_data[node].min_pfn;
+#ifdef CONFIG_VIRTUAL_MEM_MAP
NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
+#endif
free_area_init_node(node, NODE_DATA(node), zones_size,
pfn_offset, zholes_size);
}
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 3c32af9..af7eb08 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -20,32 +20,6 @@
extern void die (char *, struct pt_regs *, long);
/*
- * This routine is analogous to expand_stack() but instead grows the
- * register backing store (which grows towards higher addresses).
- * Since the register backing store is access sequentially, we
- * disallow growing the RBS by more than a page at a time. Note that
- * the VM_GROWSUP flag can be set on any VM area but that's fine
- * because the total process size is still limited by RLIMIT_STACK and
- * RLIMIT_AS.
- */
-static inline long
-expand_backing_store (struct vm_area_struct *vma, unsigned long address)
-{
- unsigned long grow;
-
- grow = PAGE_SIZE >> PAGE_SHIFT;
- if (address - vma->vm_start > current->signal->rlim[RLIMIT_STACK].rlim_cur
- || (((vma->vm_mm->total_vm + grow) << PAGE_SHIFT) > current->signal->rlim[RLIMIT_AS].rlim_cur))
- return -ENOMEM;
- vma->vm_end += PAGE_SIZE;
- vma->vm_mm->total_vm += grow;
- if (vma->vm_flags & VM_LOCKED)
- vma->vm_mm->locked_vm += grow;
- __vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file, grow);
- return 0;
-}
-
-/*
* Return TRUE if ADDRESS points at a page in the kernel's mapped segment
* (inside region 5, on ia64) and that page is present.
*/
@@ -185,7 +159,13 @@
if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
|| REGION_OFFSET(address) >= RGN_MAP_LIMIT)
goto bad_area;
- if (expand_backing_store(vma, address))
+ /*
+ * Since the register backing store is accessed sequentially,
+ * we disallow growing it by more than a page at a time.
+ */
+ if (address > vma->vm_end + PAGE_SIZE - sizeof(long))
+ goto bad_area;
+ if (expand_upwards(vma, address))
goto bad_area;
}
goto good_area;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 1281c60..e3215ba 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -158,7 +158,7 @@
vma->vm_start = current->thread.rbs_bot & PAGE_MASK;
vma->vm_end = vma->vm_start + PAGE_SIZE;
vma->vm_page_prot = protection_map[VM_DATA_DEFAULT_FLAGS & 0x7];
- vma->vm_flags = VM_DATA_DEFAULT_FLAGS | VM_GROWSUP;
+ vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT;
down_write(¤t->mm->mmap_sem);
if (insert_vm_struct(current->mm, vma)) {
up_write(¤t->mm->mmap_sem);
@@ -275,26 +275,21 @@
pgd = pgd_offset_k(address); /* note: this is NOT pgd_offset()! */
- spin_lock(&init_mm.page_table_lock);
{
pud = pud_alloc(&init_mm, pgd, address);
if (!pud)
goto out;
-
pmd = pmd_alloc(&init_mm, pud, address);
if (!pmd)
goto out;
- pte = pte_alloc_map(&init_mm, pmd, address);
+ pte = pte_alloc_kernel(pmd, address);
if (!pte)
goto out;
- if (!pte_none(*pte)) {
- pte_unmap(pte);
+ if (!pte_none(*pte))
goto out;
- }
set_pte(pte, mk_pte(page, pgprot));
- pte_unmap(pte);
}
- out: spin_unlock(&init_mm.page_table_lock);
+ out:
/* no need for flush_tlb */
return page;
}
@@ -593,7 +588,7 @@
platform_dma_init();
#endif
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
if (!mem_map)
BUG();
max_mapnr = max_low_pfn;
diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index 77118bb..4e5c8b3 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -47,3 +47,27 @@
return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
}
+
+#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
+/*
+ * Because of holes evaluate on section limits.
+ * If the section of memory exists, then return the node where the section
+ * resides. Otherwise return node 0 as the default. This is used by
+ * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
+ * the section resides.
+ */
+int early_pfn_to_nid(unsigned long pfn)
+{
+ int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
+
+ for (i = 0; i < num_node_memblks; i++) {
+ ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT;
+ esec = (node_memblk[i].start_paddr + node_memblk[i].size +
+ ((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT;
+ if (section >= ssec && section < esec)
+ return node_memblk[i].nid;
+ }
+
+ return 0;
+}
+#endif
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 464557e..c79a9b9 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -77,19 +77,25 @@
/* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */
{
int cpu = get_cpu(); /* prevent preemption/migration */
- for (i = 0; i < NR_CPUS; ++i)
- if (cpu_online(i) && (i != cpu))
+ for_each_online_cpu(i) {
+ if (i != cpu)
per_cpu(ia64_need_tlb_flush, i) = 1;
+ }
put_cpu();
}
local_flush_tlb_all();
}
void
-ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits)
+ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long nbits)
{
static DEFINE_SPINLOCK(ptcg_lock);
+ if (mm != current->active_mm) {
+ flush_tlb_all();
+ return;
+ }
+
/* HW requires global serialization of ptc.ga. */
spin_lock(&ptcg_lock);
{
@@ -135,15 +141,12 @@
unsigned long size = end - start;
unsigned long nbits;
+#ifndef CONFIG_SMP
if (mm != current->active_mm) {
- /* this does happen, but perhaps it's not worth optimizing for? */
-#ifdef CONFIG_SMP
- flush_tlb_all();
-#else
mm->context = 0;
-#endif
return;
}
+#endif
nbits = ia64_fls(size + 0xfff);
while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits))
@@ -153,12 +156,14 @@
start &= ~((1UL << nbits) - 1);
# ifdef CONFIG_SMP
- platform_global_tlb_purge(start, end, nbits);
+ platform_global_tlb_purge(mm, start, end, nbits);
# else
+ preempt_disable();
do {
ia64_ptcl(start, (nbits<<2));
start += (1UL << nbits);
} while (start < end);
+ preempt_enable();
# endif
ia64_srlz_i(); /* srlz.i implies srlz.d */
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 9b5de58..017cfc3 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -120,29 +120,6 @@
.write = pci_write,
};
-#ifdef CONFIG_NUMA
-extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **);
-static void acpi_map_iosapics(void)
-{
- acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
-}
-#else
-static void acpi_map_iosapics(void)
-{
- return;
-}
-#endif /* CONFIG_NUMA */
-
-static int __init
-pci_acpi_init (void)
-{
- acpi_map_iosapics();
-
- return 0;
-}
-
-subsys_initcall(pci_acpi_init);
-
/* Called by ACPI when it finds a new root bus. */
static struct pci_controller * __devinit
@@ -191,6 +168,29 @@
return IO_SPACE_BASE(i);
}
+static acpi_status __devinit resource_to_window(struct acpi_resource *resource,
+ struct acpi_resource_address64 *addr)
+{
+ acpi_status status;
+
+ /*
+ * We're only interested in _CRS descriptors that are
+ * - address space descriptors for memory or I/O space
+ * - non-zero size
+ * - producers, i.e., the address space is routed downstream,
+ * not consumed by the bridge itself
+ */
+ status = acpi_resource_to_address64(resource, addr);
+ if (ACPI_SUCCESS(status) &&
+ (addr->resource_type == ACPI_MEMORY_RANGE ||
+ addr->resource_type == ACPI_IO_RANGE) &&
+ addr->address_length &&
+ addr->producer_consumer == ACPI_PRODUCER)
+ return AE_OK;
+
+ return AE_ERROR;
+}
+
static acpi_status __devinit
count_window (struct acpi_resource *resource, void *data)
{
@@ -198,11 +198,9 @@
struct acpi_resource_address64 addr;
acpi_status status;
- status = acpi_resource_to_address64(resource, &addr);
+ status = resource_to_window(resource, &addr);
if (ACPI_SUCCESS(status))
- if (addr.resource_type == ACPI_MEMORY_RANGE ||
- addr.resource_type == ACPI_IO_RANGE)
- (*windows)++;
+ (*windows)++;
return AE_OK;
}
@@ -221,13 +219,11 @@
unsigned long flags, offset = 0;
struct resource *root;
- status = acpi_resource_to_address64(res, &addr);
+ /* Return AE_OK for non-window resources to keep scanning for more */
+ status = resource_to_window(res, &addr);
if (!ACPI_SUCCESS(status))
return AE_OK;
- if (!addr.address_length)
- return AE_OK;
-
if (addr.resource_type == ACPI_MEMORY_RANGE) {
flags = IORESOURCE_MEM;
root = &iomem_resource;
diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c
index 45854c6..d71f4de 100644
--- a/arch/ia64/sn/kernel/bte.c
+++ b/arch/ia64/sn/kernel/bte.c
@@ -87,7 +87,7 @@
unsigned long irq_flags;
unsigned long itc_end = 0;
int nasid_to_try[MAX_NODES_TO_TRY];
- int my_nasid = get_nasid();
+ int my_nasid = cpuid_to_nasid(raw_smp_processor_id());
int bte_if_index, nasid_index;
int bte_first, btes_per_node = BTES_PER_NODE;
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 906622d..b4f5053 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -22,8 +22,6 @@
#include "xtalk/hubdev.h"
#include "xtalk/xwidgetdev.h"
-nasid_t master_nasid = INVALID_NASID; /* Partition Master */
-
static struct list_head sn_sysdata_list;
/* sysdata list struct */
@@ -165,7 +163,7 @@
* Get SGI Specific HUB chipset information.
* Inform Prom that this kernel can support domain bus numbering.
*/
- for (i = 0; i < numionodes; i++) {
+ for (i = 0; i < num_cnodes; i++) {
hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
nasid = cnodeid_to_nasid(i);
hubdev->max_segment_number = 0xffffffff;
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 6f8c588..0fb579e 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -59,8 +59,6 @@
#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */
-lboard_t *root_lboard[MAX_COMPACT_NODES];
-
extern void bte_init_node(nodepda_t *, cnodeid_t);
extern void sn_timer_init(void);
@@ -97,15 +95,15 @@
EXPORT_SYMBOL(sn_region_size);
int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
-short physical_node_map[MAX_PHYSNODE_ID];
+short physical_node_map[MAX_NUMALINK_NODES];
static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS];
EXPORT_SYMBOL(physical_node_map);
-int numionodes;
+int num_cnodes;
static void sn_init_pdas(char **);
-static void scan_for_ionodes(void);
+static void build_cnode_tables(void);
static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
@@ -140,19 +138,6 @@
#endif
/*
- * Get nasid of current cpu early in boot before nodepda is initialized
- */
-static int
-boot_get_nasid(void)
-{
- int nasid;
-
- if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL))
- BUG();
- return nasid;
-}
-
-/*
* This routine can only be used during init, since
* smp_boot_data is an init data structure.
* We have to use smp_boot_data.cpu_phys_id to find
@@ -223,7 +208,6 @@
}
extern int platform_intr_list[];
-extern nasid_t master_nasid;
static int __initdata shub_1_1_found = 0;
/*
@@ -269,7 +253,6 @@
void __init sn_setup(char **cmdline_p)
{
long status, ticks_per_sec, drift;
- int pxm;
u32 version = sn_sal_rev();
extern void sn_cpu_init(void);
@@ -300,11 +283,10 @@
MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
- memset(physical_node_map, -1, sizeof(physical_node_map));
- for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++)
- if (pxm_to_nid_map[pxm] != -1)
- physical_node_map[pxm_to_nasid(pxm)] =
- pxm_to_nid_map[pxm];
+ /*
+ * Build the tables for managing cnodes.
+ */
+ build_cnode_tables();
/*
* Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
@@ -319,8 +301,6 @@
printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
- master_nasid = boot_get_nasid();
-
status =
ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
&drift);
@@ -378,15 +358,6 @@
{
cnodeid_t cnode;
- memset(sn_cnodeid_to_nasid, -1,
- sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
- for_each_online_node(cnode)
- sn_cnodeid_to_nasid[cnode] =
- pxm_to_nasid(nid_to_pxm_map[cnode]);
-
- numionodes = num_online_nodes();
- scan_for_ionodes();
-
/*
* Allocate & initalize the nodepda for each node.
*/
@@ -402,7 +373,7 @@
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
- for (cnode = num_online_nodes(); cnode < numionodes; cnode++) {
+ for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
@@ -411,7 +382,7 @@
/*
* Now copy the array of nodepda pointers to each nodepda.
*/
- for (cnode = 0; cnode < numionodes; cnode++)
+ for (cnode = 0; cnode < num_cnodes; cnode++)
memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
sizeof(nodepdaindr));
@@ -428,7 +399,7 @@
* Initialize the per node hubdev. This includes IO Nodes and
* headless/memless nodes.
*/
- for (cnode = 0; cnode < numionodes; cnode++) {
+ for (cnode = 0; cnode < num_cnodes; cnode++) {
hubdev_init_node(nodepdaindr[cnode], cnode);
}
}
@@ -553,87 +524,58 @@
}
/*
- * Scan klconfig for ionodes. Add the nasids to the
- * physical_node_map and the pda and increment numionodes.
+ * Build tables for converting between NASIDs and cnodes.
*/
-
-static void __init scan_for_ionodes(void)
+static inline int __init board_needs_cnode(int type)
{
- int nasid = 0;
+ return (type == KLTYPE_SNIA || type == KLTYPE_TIO);
+}
+
+void __init build_cnode_tables(void)
+{
+ int nasid;
+ int node;
lboard_t *brd;
+ memset(physical_node_map, -1, sizeof(physical_node_map));
+ memset(sn_cnodeid_to_nasid, -1,
+ sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
+
+ /*
+ * First populate the tables with C/M bricks. This ensures that
+ * cnode == node for all C & M bricks.
+ */
+ for_each_online_node(node) {
+ nasid = pxm_to_nasid(nid_to_pxm_map[node]);
+ sn_cnodeid_to_nasid[node] = nasid;
+ physical_node_map[nasid] = node;
+ }
+
+ /*
+ * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node
+ * limit on the number of nodes, we can't use the generic node numbers
+ * for this. Note that num_cnodes is incremented below as TIOs or
+ * headless/memoryless nodes are discovered.
+ */
+ num_cnodes = num_online_nodes();
+
/* fakeprom does not support klgraph */
if (IS_RUNNING_ON_FAKE_PROM())
return;
- /* Setup ionodes with memory */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- char *klgraph_header;
- cnodeid_t cnodeid;
-
- if (physical_node_map[nasid] == -1)
- continue;
-
- cnodeid = -1;
- klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
- if (!klgraph_header) {
- BUG(); /* All nodes must have klconfig tables! */
- }
- cnodeid = nasid_to_cnodeid(nasid);
- root_lboard[cnodeid] = (lboard_t *)
- NODE_OFFSET_TO_LBOARD((nasid),
- ((kl_config_hdr_t
- *) (klgraph_header))->
- ch_board_info);
- }
-
- /* Scan headless/memless IO Nodes. */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- /* if there's no nasid, don't try to read the klconfig on the node */
- if (physical_node_map[nasid] == -1)
- continue;
- brd = find_lboard_any((lboard_t *)
- root_lboard[nasid_to_cnodeid(nasid)],
- KLTYPE_SNIA);
- if (brd) {
- brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */
- if (!brd)
- continue;
- }
-
- brd = find_lboard_any(brd, KLTYPE_SNIA);
-
+ /* Find TIOs & headless/memoryless nodes and add them to the tables */
+ for_each_online_node(node) {
+ kl_config_hdr_t *klgraph_header;
+ nasid = cnodeid_to_nasid(node);
+ if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
+ BUG();
+ brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
while (brd) {
- sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
- physical_node_map[brd->brd_nasid] = numionodes;
- root_lboard[numionodes] = brd;
- numionodes++;
- brd = KLCF_NEXT_ANY(brd);
- if (!brd)
- break;
-
- brd = find_lboard_any(brd, KLTYPE_SNIA);
- }
- }
-
- /* Scan for TIO nodes. */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- /* if there's no nasid, don't try to read the klconfig on the node */
- if (physical_node_map[nasid] == -1)
- continue;
- brd = find_lboard_any((lboard_t *)
- root_lboard[nasid_to_cnodeid(nasid)],
- KLTYPE_TIO);
- while (brd) {
- sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
- physical_node_map[brd->brd_nasid] = numionodes;
- root_lboard[numionodes] = brd;
- numionodes++;
- brd = KLCF_NEXT_ANY(brd);
- if (!brd)
- break;
-
- brd = find_lboard_any(brd, KLTYPE_TIO);
+ if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
+ sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid;
+ physical_node_map[brd->brd_nasid] = num_cnodes++;
+ }
+ brd = find_lboard_next(brd);
}
}
}
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index 0a4ee50..49b530c 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -177,6 +177,7 @@
/**
* sn2_global_tlb_purge - globally purge translation cache of virtual address range
+ * @mm: mm_struct containing virtual address range
* @start: start of virtual address range
* @end: end of virtual address range
* @nbits: specifies number of bytes to purge per instruction (num = 1<<(nbits & 0xfc))
@@ -188,21 +189,22 @@
* - cpu_vm_mask is a bit mask that indicates which cpus have loaded the context.
* - cpu_vm_mask is converted into a nodemask of the nodes containing the
* cpus in cpu_vm_mask.
- * - if only one bit is set in cpu_vm_mask & it is the current cpu,
- * then only the local TLB needs to be flushed. This flushing can be done
- * using ptc.l. This is the common case & avoids the global spinlock.
+ * - if only one bit is set in cpu_vm_mask & it is the current cpu & the
+ * process is purging its own virtual address range, then only the
+ * local TLB needs to be flushed. This flushing can be done using
+ * ptc.l. This is the common case & avoids the global spinlock.
* - if multiple cpus have loaded the context, then flushing has to be
* done with ptc.g/MMRs under protection of the global ptc_lock.
*/
void
-sn2_global_tlb_purge(unsigned long start, unsigned long end,
- unsigned long nbits)
+sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
+ unsigned long end, unsigned long nbits)
{
int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
+ int mymm = (mm == current->active_mm);
volatile unsigned long *ptc0, *ptc1;
- unsigned long itc, itc2, flags, data0 = 0, data1 = 0;
- struct mm_struct *mm = current->active_mm;
+ unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value;
short nasids[MAX_NUMNODES], nix;
nodemask_t nodes_flushed;
@@ -216,9 +218,12 @@
i++;
}
+ if (i == 0)
+ return;
+
preempt_disable();
- if (likely(i == 1 && lcpu == smp_processor_id())) {
+ if (likely(i == 1 && lcpu == smp_processor_id() && mymm)) {
do {
ia64_ptcl(start, nbits << 2);
start += (1UL << nbits);
@@ -229,7 +234,7 @@
return;
}
- if (atomic_read(&mm->mm_users) == 1) {
+ if (atomic_read(&mm->mm_users) == 1 && mymm) {
flush_tlb_mm(mm);
__get_cpu_var(ptcstats).change_rid++;
preempt_enable();
@@ -241,11 +246,13 @@
for_each_node_mask(cnode, nodes_flushed)
nasids[nix++] = cnodeid_to_nasid(cnode);
+ rr_value = (mm->context << 3) | REGION_NUMBER(start);
+
shub1 = is_shub1();
if (shub1) {
data0 = (1UL << SH1_PTC_0_A_SHFT) |
(nbits << SH1_PTC_0_PS_SHFT) |
- ((ia64_get_rr(start) >> 8) << SH1_PTC_0_RID_SHFT) |
+ (rr_value << SH1_PTC_0_RID_SHFT) |
(1UL << SH1_PTC_0_START_SHFT);
ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_0);
ptc1 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_1);
@@ -254,7 +261,7 @@
(nbits << SH2_PTC_PS_SHFT) |
(1UL << SH2_PTC_START_SHFT);
ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH2_PTC +
- ((ia64_get_rr(start) >> 8) << SH2_PTC_RID_SHFT) );
+ (rr_value << SH2_PTC_RID_SHFT));
ptc1 = NULL;
}
@@ -275,7 +282,7 @@
data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
for (i = 0; i < nix; i++) {
nasid = nasids[i];
- if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) {
+ if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) {
ia64_ptcga(start, nbits << 2);
ia64_srlz_i();
} else {
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 0513aac..6c6fbca 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -476,8 +476,8 @@
for_each_online_cpu(j) {
seq_printf(s, j ? ":%d" : ", dist %d",
node_distance(
- cpuid_to_cnodeid(i),
- cpuid_to_cnodeid(j)));
+ cpu_to_node(i),
+ cpu_to_node(j)));
}
seq_putc(s, '\n');
}
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index b45db51..0d8592a 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -183,11 +183,12 @@
* @part_num: device's part number
* @mfg_num: device's manufacturer number
* @hubdev: hub info associated with this device
+ * @bt: board type of the device
*
*/
int
cx_device_register(nasid_t nasid, int part_num, int mfg_num,
- struct hubdev_info *hubdev)
+ struct hubdev_info *hubdev, int bt)
{
struct cx_dev *cx_dev;
@@ -200,6 +201,7 @@
cx_dev->cx_id.mfg_num = mfg_num;
cx_dev->cx_id.nasid = nasid;
cx_dev->hubdev = hubdev;
+ cx_dev->bt = bt;
cx_dev->dev.parent = NULL;
cx_dev->dev.bus = &tiocx_bus_type;
@@ -238,7 +240,8 @@
{
cx_device_unregister(cx_dev);
return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
- cx_dev->cx_id.mfg_num, cx_dev->hubdev);
+ cx_dev->cx_id.mfg_num, cx_dev->hubdev,
+ cx_dev->bt);
}
static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget,
@@ -365,26 +368,20 @@
udelay(2000);
}
-static int tiocx_btchar_get(int nasid)
+static int is_fpga_tio(int nasid, int *bt)
{
- moduleid_t module_id;
- geoid_t geoid;
- int cnodeid;
+ int ioboard_type;
- cnodeid = nasid_to_cnodeid(nasid);
- geoid = cnodeid_get_geoid(cnodeid);
- module_id = geo_module(geoid);
- return MODULE_GET_BTCHAR(module_id);
-}
+ ioboard_type = ia64_sn_sysctl_ioboard_get(nasid);
-static int is_fpga_brick(int nasid)
-{
- switch (tiocx_btchar_get(nasid)) {
+ switch (ioboard_type) {
case L1_BRICKTYPE_SA:
case L1_BRICKTYPE_ATHENA:
- case L1_BRICKTYPE_DAYTONA:
+ case L1_BOARDTYPE_DAYTONA:
+ *bt = ioboard_type;
return 1;
}
+
return 0;
}
@@ -407,16 +404,22 @@
if (bitstream_loaded(nasid)) {
uint64_t cx_id;
+ int rv;
- cx_id =
- *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+ rv = ia64_sn_sysctl_tio_clock_reset(nasid);
+ if (rv) {
+ printk(KERN_ALERT "CX port JTAG reset failed.\n");
+ } else {
+ cx_id = *(volatile uint64_t *)
+ (TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
WIDGET_ID);
- part_num = XWIDGET_PART_NUM(cx_id);
- mfg_num = XWIDGET_MFG_NUM(cx_id);
- DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
- /* just ignore it if it's a CE */
- if (part_num == TIO_CE_ASIC_PARTNUM)
- return 0;
+ part_num = XWIDGET_PART_NUM(cx_id);
+ mfg_num = XWIDGET_MFG_NUM(cx_id);
+ DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
+ /* just ignore it if it's a CE */
+ if (part_num == TIO_CE_ASIC_PARTNUM)
+ return 0;
+ }
}
cx_dev->cx_id.part_num = part_num;
@@ -436,10 +439,10 @@
{
struct cx_dev *cx_dev = to_cx_dev(dev);
- return sprintf(buf, "0x%x 0x%x 0x%x %d\n",
+ return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n",
cx_dev->cx_id.nasid,
cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num,
- tiocx_btchar_get(cx_dev->cx_id.nasid));
+ cx_dev->bt);
}
static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf,
@@ -486,13 +489,13 @@
bus_register(&tiocx_bus_type);
- for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) {
+ for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) {
nasid_t nasid;
+ int bt;
- if ((nasid = cnodeid_to_nasid(cnodeid)) < 0)
- break; /* No more nasids .. bail out of loop */
+ nasid = cnodeid_to_nasid(cnodeid);
- if ((nasid & 0x1) && is_fpga_brick(nasid)) {
+ if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) {
struct hubdev_info *hubdev;
struct xwidget_info *widgetp;
@@ -512,7 +515,7 @@
if (cx_device_register
(nasid, widgetp->xwi_hwid.part_num,
- widgetp->xwi_hwid.mfg_num, hubdev) < 0)
+ widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0)
return -ENXIO;
else
found_tiocx_device++;
diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h
index d0ee635..fbcedc7 100644
--- a/arch/ia64/sn/kernel/xpc.h
+++ b/arch/ia64/sn/kernel/xpc.h
@@ -57,7 +57,7 @@
#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
#define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */
-#define XPC_HB_CHECK_DEFAULT_TIMEOUT 20 /* check HB every x secs */
+#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */
/* define the process name of HB checker and the CPU it is pinned to */
#define XPC_HB_CHECK_THREAD_NAME "xpc_hb"
@@ -67,34 +67,82 @@
#define XPC_DISCOVERY_THREAD_NAME "xpc_discovery"
-#define XPC_HB_ALLOWED(_p, _v) ((_v)->heartbeating_to_mask & (1UL << (_p)))
-#define XPC_ALLOW_HB(_p, _v) (_v)->heartbeating_to_mask |= (1UL << (_p))
-#define XPC_DISALLOW_HB(_p, _v) (_v)->heartbeating_to_mask &= (~(1UL << (_p)))
-
-
/*
- * Reserved Page provided by SAL.
+ * the reserved page
*
- * SAL provides one page per partition of reserved memory. When SAL
- * initialization is complete, SAL_signature, SAL_version, partid,
- * part_nasids, and mach_nasids are set.
+ * SAL reserves one page of memory per partition for XPC. Though a full page
+ * in length (16384 bytes), its starting address is not page aligned, but it
+ * is cacheline aligned. The reserved page consists of the following:
+ *
+ * reserved page header
+ *
+ * The first cacheline of the reserved page contains the header
+ * (struct xpc_rsvd_page). Before SAL initialization has completed,
+ * SAL has set up the following fields of the reserved page header:
+ * SAL_signature, SAL_version, partid, and nasids_size. The other
+ * fields are set up by XPC. (xpc_rsvd_page points to the local
+ * partition's reserved page.)
+ *
+ * part_nasids mask
+ * mach_nasids mask
+ *
+ * SAL also sets up two bitmaps (or masks), one that reflects the actual
+ * nasids in this partition (part_nasids), and the other that reflects
+ * the actual nasids in the entire machine (mach_nasids). We're only
+ * interested in the even numbered nasids (which contain the processors
+ * and/or memory), so we only need half as many bits to represent the
+ * nasids. The part_nasids mask is located starting at the first cacheline
+ * following the reserved page header. The mach_nasids mask follows right
+ * after the part_nasids mask. The size in bytes of each mask is reflected
+ * by the reserved page header field 'nasids_size'. (Local partition's
+ * mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *
+ * vars
+ * vars part
+ *
+ * Immediately following the mach_nasids mask are the XPC variables
+ * required by other partitions. First are those that are generic to all
+ * partitions (vars), followed on the next available cacheline by those
+ * which are partition specific (vars part). These are setup by XPC.
+ * (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
*
* Note: Until vars_pa is set, the partition XPC code has not been initialized.
*/
struct xpc_rsvd_page {
- u64 SAL_signature; /* SAL unique signature */
- u64 SAL_version; /* SAL specified version */
- u8 partid; /* partition ID from SAL */
+ u64 SAL_signature; /* SAL: unique signature */
+ u64 SAL_version; /* SAL: version */
+ u8 partid; /* SAL: partition ID */
u8 version;
- u8 pad[6]; /* pad to u64 align */
+ u8 pad1[6]; /* align to next u64 in cacheline */
volatile u64 vars_pa;
- u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
- u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
+ struct timespec stamp; /* time when reserved page was setup by XPC */
+ u64 pad2[9]; /* align to last u64 in cacheline */
+ u64 nasids_size; /* SAL: size of each nasid mask in bytes */
};
-#define XPC_RP_VERSION _XPC_VERSION(1,0) /* version 1.0 of the reserved page */
-#define XPC_RSVD_PAGE_ALIGNED_SIZE \
- (L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)))
+#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */
+
+#define XPC_SUPPORTS_RP_STAMP(_version) \
+ (_version >= _XPC_VERSION(1,1))
+
+/*
+ * compare stamps - the return value is:
+ *
+ * < 0, if stamp1 < stamp2
+ * = 0, if stamp1 == stamp2
+ * > 0, if stamp1 > stamp2
+ */
+static inline int
+xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
+{
+ int ret;
+
+
+ if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) {
+ ret = stamp1->tv_nsec - stamp2->tv_nsec;
+ }
+ return ret;
+}
/*
@@ -121,11 +169,58 @@
u64 vars_part_pa;
u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */
AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */
- AMO_t *act_amos; /* pointer to the first activation AMO */
};
-#define XPC_V_VERSION _XPC_VERSION(3,0) /* version 3.0 of the cross vars */
-#define XPC_VARS_ALIGNED_SIZE (L1_CACHE_ALIGN(sizeof(struct xpc_vars)))
+#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */
+
+#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
+ (_version >= _XPC_VERSION(3,1))
+
+
+static inline int
+xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
+{
+ return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
+}
+
+static inline void
+xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
+{
+ u64 old_mask, new_mask;
+
+ do {
+ old_mask = vars->heartbeating_to_mask;
+ new_mask = (old_mask | (1UL << partid));
+ } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+ old_mask);
+}
+
+static inline void
+xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
+{
+ u64 old_mask, new_mask;
+
+ do {
+ old_mask = vars->heartbeating_to_mask;
+ new_mask = (old_mask & ~(1UL << partid));
+ } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+ old_mask);
+}
+
+
+/*
+ * The AMOs page consists of a number of AMO variables which are divided into
+ * four groups, The first two groups are used to identify an IRQ's sender.
+ * These two groups consist of 64 and 128 AMO variables respectively. The last
+ * two groups, consisting of just one AMO variable each, are used to identify
+ * the remote partitions that are currently engaged (from the viewpoint of
+ * the XPC running on the remote partition).
+ */
+#define XPC_NOTIFY_IRQ_AMOS 0
+#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
+#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
+#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1)
+
/*
* The following structure describes the per partition specific variables.
@@ -165,6 +260,16 @@
#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
+/* the reserved page sizes and offsets */
+
+#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
+#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+
+#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE)
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS(_rp) ((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS_PART(_rp) (struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE)
+
/*
* Functions registered by add_timer() or called by kernel_thread() only
@@ -349,6 +454,9 @@
atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */
wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */
+ u8 delayed_IPI_flags; /* IPI flags received, but delayed */
+ /* action until channel disconnected */
+
/* queue of msg senders who want to be notified when msg received */
atomic_t n_to_notify; /* #of msg senders to notify */
@@ -358,7 +466,7 @@
void *key; /* pointer to user's key */
struct semaphore msg_to_pull_sema; /* next msg to pull serialization */
- struct semaphore teardown_sema; /* wait for teardown completion */
+ struct semaphore wdisconnect_sema; /* wait for channel disconnect */
struct xpc_openclose_args *local_openclose_args; /* args passed on */
/* opening or closing of channel */
@@ -410,6 +518,8 @@
#define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */
#define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */
+#define XPC_C_DISCONNECTCALLOUT 0x00008000 /* chan disconnected callout made */
+#define XPC_C_WDISCONNECT 0x00010000 /* waiting for channel disconnect */
@@ -422,6 +532,8 @@
/* XPC HB infrastructure */
+ u8 remote_rp_version; /* version# of partition's rsvd pg */
+ struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */
u64 remote_rp_pa; /* phys addr of partition's rsvd pg */
u64 remote_vars_pa; /* phys addr of partition's vars */
u64 remote_vars_part_pa; /* phys addr of partition's vars part */
@@ -432,14 +544,18 @@
u32 act_IRQ_rcvd; /* IRQs since activation */
spinlock_t act_lock; /* protect updating of act_state */
u8 act_state; /* from XPC HB viewpoint */
+ u8 remote_vars_version; /* version# of partition's vars */
enum xpc_retval reason; /* reason partition is deactivating */
int reason_line; /* line# deactivation initiated from */
int reactivate_nasid; /* nasid in partition to reactivate */
+ unsigned long disengage_request_timeout; /* timeout in jiffies */
+ struct timer_list disengage_request_timer;
+
/* XPC infrastructure referencing and teardown control */
- volatile u8 setup_state; /* infrastructure setup state */
+ volatile u8 setup_state; /* infrastructure setup state */
wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */
atomic_t references; /* #of references to infrastructure */
@@ -454,6 +570,7 @@
u8 nchannels; /* #of defined channels supported */
atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */
+ atomic_t nchannels_engaged;/* #of channels engaged with remote part */
struct xpc_channel *channels;/* array of channel structures */
void *local_GPs_base; /* base address of kmalloc'd space */
@@ -518,6 +635,7 @@
#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */
+
/*
* struct xpc_partition IPI_timer #of seconds to wait before checking for
* dropped IPIs. These occur whenever an IPI amo write doesn't complete until
@@ -526,6 +644,13 @@
#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ)
+/* number of seconds to wait for other partitions to disengage */
+#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90
+
+/* interval in seconds to print 'waiting disengagement' messages */
+#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10
+
+
#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0]))
@@ -534,24 +659,20 @@
extern struct xpc_registration xpc_registrations[];
-/* >>> found in xpc_main.c only */
+/* found in xpc_main.c */
extern struct device *xpc_part;
extern struct device *xpc_chan;
+extern int xpc_disengage_request_timelimit;
extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *);
extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
extern void xpc_create_kthreads(struct xpc_channel *, int);
extern void xpc_disconnect_wait(int);
-/* found in xpc_main.c and efi-xpc.c */
-extern void xpc_activate_partition(struct xpc_partition *);
-
-
/* found in xpc_partition.c */
extern int xpc_exiting;
-extern int xpc_hb_interval;
-extern int xpc_hb_check_interval;
extern struct xpc_vars *xpc_vars;
extern struct xpc_rsvd_page *xpc_rsvd_page;
extern struct xpc_vars_part *xpc_vars_part;
@@ -561,6 +682,7 @@
extern void xpc_allow_IPI_ops(void);
extern void xpc_restrict_IPI_ops(void);
extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_partition_disengaged(struct xpc_partition *);
extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
extern void xpc_mark_partition_inactive(struct xpc_partition *);
extern void xpc_discovery(void);
@@ -585,8 +707,8 @@
extern void xpc_deliver_msg(struct xpc_channel *);
extern void xpc_disconnect_channel(const int, struct xpc_channel *,
enum xpc_retval, unsigned long *);
-extern void xpc_disconnected_callout(struct xpc_channel *);
-extern void xpc_partition_down(struct xpc_partition *, enum xpc_retval);
+extern void xpc_disconnecting_callout(struct xpc_channel *);
+extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
extern void xpc_teardown_infrastructure(struct xpc_partition *);
@@ -674,6 +796,157 @@
/*
+ * This next set of inlines are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static inline void
+xpc_mark_partition_engaged(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* set bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+ (1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_mark_partition_disengaged(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* clear bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~(1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_request_partition_disengage(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* set bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+ (1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_cancel_partition_disengage_request(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* clear bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~(1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline u64
+xpc_partition_engaged(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+ /* return our partition's AMO variable ANDed with partid_mask */
+ return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+ partid_mask);
+}
+
+static inline u64
+xpc_partition_disengage_requested(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+ /* return our partition's AMO variable ANDed with partid_mask */
+ return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+ partid_mask);
+}
+
+static inline void
+xpc_clear_partition_engaged(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+ /* clear bit(s) based on partid_mask in our partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~partid_mask);
+}
+
+static inline void
+xpc_clear_partition_disengage_request(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+ /* clear bit(s) based on partid_mask in our partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~partid_mask);
+}
+
+
+
+/*
* The following set of macros and inlines are used for the sending and
* receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
* one that is associated with partition activity (SGI_XPC_ACTIVATE) and
@@ -722,13 +995,13 @@
* Flag the appropriate AMO variable and send an IPI to the specified node.
*/
static inline void
-xpc_activate_IRQ_send(u64 amos_page, int from_nasid, int to_nasid,
+xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
int to_phys_cpuid)
{
int w_index = XPC_NASID_W_INDEX(from_nasid);
int b_index = XPC_NASID_B_INDEX(from_nasid);
- AMO_t *amos = (AMO_t *) __va(amos_page +
- (XP_MAX_PARTITIONS * sizeof(AMO_t)));
+ AMO_t *amos = (AMO_t *) __va(amos_page_pa +
+ (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
(void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
@@ -756,6 +1029,13 @@
xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
}
+static inline void
+xpc_IPI_send_disengage(struct xpc_partition *part)
+{
+ xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
+ part->remote_act_nasid, part->remote_act_phys_cpuid);
+}
+
/*
* IPIs associated with SGI_XPC_NOTIFY IRQ.
@@ -836,6 +1116,7 @@
/* given an AMO variable and a channel#, get its associated IPI flags */
#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff))
+#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8))
#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f)
#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010)
@@ -903,17 +1184,18 @@
* cacheable mapping for the entire region. This will prevent speculative
* reading of cached copies of our lines from being issued which will cause
* a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * (XP_MAX_PARTITIONS) AMO variables for message notification (xpc_main.c)
- * and an additional 16 AMO variables for partition activation (xpc_hb.c).
+ * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
+ * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
+ * activation and 2 AMO variables for partition deactivation.
*/
static inline AMO_t *
-xpc_IPI_init(partid_t partid)
+xpc_IPI_init(int index)
{
- AMO_t *part_amo = xpc_vars->amos_page + partid;
+ AMO_t *amo = xpc_vars->amos_page + index;
- xpc_IPI_receive(part_amo);
- return part_amo;
+ (void) xpc_IPI_receive(amo); /* clear AMO variable */
+ return amo;
}
@@ -939,7 +1221,7 @@
static inline void *
-xpc_kmalloc_cacheline_aligned(size_t size, int flags, void **base)
+xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
{
/* see if kmalloc will give us cachline aligned memory by default */
*base = kmalloc(size, flags);
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index 94698be..abf4fc2 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -57,6 +57,7 @@
spin_lock_init(&ch->lock);
sema_init(&ch->msg_to_pull_sema, 1); /* mutex */
+ sema_init(&ch->wdisconnect_sema, 0); /* event wait */
atomic_set(&ch->n_on_msg_allocate_wq, 0);
init_waitqueue_head(&ch->msg_allocate_wq);
@@ -166,6 +167,7 @@
xpc_initialize_channels(part, partid);
atomic_set(&part->nchannels_active, 0);
+ atomic_set(&part->nchannels_engaged, 0);
/* local_IPI_amo were set to 0 by an earlier memset() */
@@ -555,8 +557,6 @@
sema_init(&ch->notify_queue[i].sema, 0);
}
- sema_init(&ch->teardown_sema, 0); /* event wait */
-
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_SETUP;
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -626,6 +626,55 @@
/*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
+{
+ struct xpc_notify *notify;
+ u8 notify_type;
+ s64 get = ch->w_remote_GP.get - 1;
+
+
+ while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+ notify = &ch->notify_queue[get % ch->local_nentries];
+
+ /*
+ * See if the notify entry indicates it was associated with
+ * a message who's sender wants to be notified. It is possible
+ * that it is, but someone else is doing or has done the
+ * notification.
+ */
+ notify_type = notify->type;
+ if (notify_type == 0 ||
+ cmpxchg(¬ify->type, notify_type, 0) !=
+ notify_type) {
+ continue;
+ }
+
+ DBUG_ON(notify_type != XPC_N_CALL);
+
+ atomic_dec(&ch->n_to_notify);
+
+ if (notify->func != NULL) {
+ dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
+ "msg_number=%ld, partid=%d, channel=%d\n",
+ (void *) notify, get, ch->partid, ch->number);
+
+ notify->func(reason, ch->partid, ch->number,
+ notify->key);
+
+ dev_dbg(xpc_chan, "notify->func() returned, "
+ "notify=0x%p, msg_number=%ld, partid=%d, "
+ "channel=%d\n", (void *) notify, get,
+ ch->partid, ch->number);
+ }
+ }
+}
+
+
+/*
* Free up message queues and other stuff that were allocated for the specified
* channel.
*
@@ -669,9 +718,6 @@
ch->remote_msgqueue = NULL;
kfree(ch->notify_queue);
ch->notify_queue = NULL;
-
- /* in case someone is waiting for the teardown to complete */
- up(&ch->teardown_sema);
}
}
@@ -683,7 +729,7 @@
xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
{
struct xpc_partition *part = &xpc_partitions[ch->partid];
- u32 ch_flags = ch->flags;
+ u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED);
DBUG_ON(!spin_is_locked(&ch->lock));
@@ -701,12 +747,13 @@
}
DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0);
- /* it's now safe to free the channel's message queues */
+ if (part->act_state == XPC_P_DEACTIVATING) {
+ /* can't proceed until the other side disengages from us */
+ if (xpc_partition_engaged(1UL << ch->partid)) {
+ return;
+ }
- xpc_free_msgqueues(ch);
- DBUG_ON(ch->flags & XPC_C_SETUP);
-
- if (part->act_state != XPC_P_DEACTIVATING) {
+ } else {
/* as long as the other side is up do the full protocol */
@@ -724,16 +771,42 @@
}
}
+ /* wake those waiting for notify completion */
+ if (atomic_read(&ch->n_to_notify) > 0) {
+ /* >>> we do callout while holding ch->lock */
+ xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+ }
+
/* both sides are disconnected now */
- ch->flags = XPC_C_DISCONNECTED; /* clear all flags, but this one */
+ /* it's now safe to free the channel's message queues */
+ xpc_free_msgqueues(ch);
+
+ /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+ ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
atomic_dec(&part->nchannels_active);
- if (ch_flags & XPC_C_WASCONNECTED) {
+ if (channel_was_connected) {
dev_info(xpc_chan, "channel %d to partition %d disconnected, "
"reason=%d\n", ch->number, ch->partid, ch->reason);
}
+
+ if (ch->flags & XPC_C_WDISCONNECT) {
+ spin_unlock_irqrestore(&ch->lock, *irq_flags);
+ up(&ch->wdisconnect_sema);
+ spin_lock_irqsave(&ch->lock, *irq_flags);
+
+ } else if (ch->delayed_IPI_flags) {
+ if (part->act_state != XPC_P_DEACTIVATING) {
+ /* time to take action on any delayed IPI flags */
+ spin_lock(&part->IPI_lock);
+ XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
+ ch->delayed_IPI_flags);
+ spin_unlock(&part->IPI_lock);
+ }
+ ch->delayed_IPI_flags = 0;
+ }
}
@@ -754,6 +827,19 @@
spin_lock_irqsave(&ch->lock, irq_flags);
+again:
+
+ if ((ch->flags & XPC_C_DISCONNECTED) &&
+ (ch->flags & XPC_C_WDISCONNECT)) {
+ /*
+ * Delay processing IPI flags until thread waiting disconnect
+ * has had a chance to see that the channel is disconnected.
+ */
+ ch->delayed_IPI_flags |= IPI_flags;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
+
if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
@@ -764,7 +850,7 @@
/*
* If RCLOSEREQUEST is set, we're probably waiting for
* RCLOSEREPLY. We should find it and a ROPENREQUEST packed
- * with this RCLOSEQREUQEST in the IPI_flags.
+ * with this RCLOSEREQUEST in the IPI_flags.
*/
if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -779,14 +865,22 @@
/* both sides have finished disconnecting */
xpc_process_disconnect(ch, &irq_flags);
+ DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
+ goto again;
}
if (ch->flags & XPC_C_DISCONNECTED) {
- // >>> explain this section
-
if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
- DBUG_ON(part->act_state !=
- XPC_P_DEACTIVATING);
+ if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
+ ch_number) & XPC_IPI_OPENREQUEST)) {
+
+ DBUG_ON(ch->delayed_IPI_flags != 0);
+ spin_lock(&part->IPI_lock);
+ XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+ ch_number,
+ XPC_IPI_CLOSEREQUEST);
+ spin_unlock(&part->IPI_lock);
+ }
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
@@ -816,9 +910,13 @@
}
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
- } else {
- xpc_process_disconnect(ch, &irq_flags);
+
+ DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
}
+
+ xpc_process_disconnect(ch, &irq_flags);
}
@@ -834,7 +932,20 @@
}
DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
- DBUG_ON(!(ch->flags & XPC_C_RCLOSEREQUEST));
+
+ if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
+ if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
+ & XPC_IPI_CLOSEREQUEST)) {
+
+ DBUG_ON(ch->delayed_IPI_flags != 0);
+ spin_lock(&part->IPI_lock);
+ XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+ ch_number, XPC_IPI_CLOSEREPLY);
+ spin_unlock(&part->IPI_lock);
+ }
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
ch->flags |= XPC_C_RCLOSEREPLY;
@@ -852,8 +963,14 @@
"channel=%d\n", args->msg_size, args->local_nentries,
ch->partid, ch->number);
- if ((ch->flags & XPC_C_DISCONNECTING) ||
- part->act_state == XPC_P_DEACTIVATING) {
+ if (part->act_state == XPC_P_DEACTIVATING ||
+ (ch->flags & XPC_C_ROPENREQUEST)) {
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
+
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
+ ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
@@ -867,8 +984,11 @@
* msg_size = size of channel's messages in bytes
* local_nentries = remote partition's local_nentries
*/
- DBUG_ON(args->msg_size == 0);
- DBUG_ON(args->local_nentries == 0);
+ if (args->msg_size == 0 || args->local_nentries == 0) {
+ /* assume OPENREQUEST was delayed by mistake */
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
ch->remote_nentries = args->local_nentries;
@@ -906,7 +1026,13 @@
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
- DBUG_ON(!(ch->flags & XPC_C_OPENREQUEST));
+ if (!(ch->flags & XPC_C_OPENREQUEST)) {
+ XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError,
+ &irq_flags);
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
+
DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
DBUG_ON(ch->flags & XPC_C_CONNECTED);
@@ -960,8 +1086,8 @@
struct xpc_registration *registration = &xpc_registrations[ch->number];
- if (down_interruptible(®istration->sema) != 0) {
- return xpcInterrupted;
+ if (down_trylock(®istration->sema) != 0) {
+ return xpcRetry;
}
if (!XPC_CHANNEL_REGISTERED(ch->number)) {
@@ -1040,55 +1166,6 @@
/*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
-{
- struct xpc_notify *notify;
- u8 notify_type;
- s64 get = ch->w_remote_GP.get - 1;
-
-
- while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
- notify = &ch->notify_queue[get % ch->local_nentries];
-
- /*
- * See if the notify entry indicates it was associated with
- * a message who's sender wants to be notified. It is possible
- * that it is, but someone else is doing or has done the
- * notification.
- */
- notify_type = notify->type;
- if (notify_type == 0 ||
- cmpxchg(¬ify->type, notify_type, 0) !=
- notify_type) {
- continue;
- }
-
- DBUG_ON(notify_type != XPC_N_CALL);
-
- atomic_dec(&ch->n_to_notify);
-
- if (notify->func != NULL) {
- dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
- "msg_number=%ld, partid=%d, channel=%d\n",
- (void *) notify, get, ch->partid, ch->number);
-
- notify->func(reason, ch->partid, ch->number,
- notify->key);
-
- dev_dbg(xpc_chan, "notify->func() returned, "
- "notify=0x%p, msg_number=%ld, partid=%d, "
- "channel=%d\n", (void *) notify, get,
- ch->partid, ch->number);
- }
- }
-}
-
-
-/*
* Clear some of the msg flags in the local message queue.
*/
static inline void
@@ -1240,6 +1317,7 @@
u64 IPI_amo, IPI_flags;
struct xpc_channel *ch;
int ch_number;
+ u32 ch_flags;
IPI_amo = xpc_get_IPI_flags(part);
@@ -1266,8 +1344,9 @@
xpc_process_openclose_IPI(part, ch_number, IPI_flags);
}
+ ch_flags = ch->flags; /* need an atomic snapshot of flags */
- if (ch->flags & XPC_C_DISCONNECTING) {
+ if (ch_flags & XPC_C_DISCONNECTING) {
spin_lock_irqsave(&ch->lock, irq_flags);
xpc_process_disconnect(ch, &irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1278,9 +1357,9 @@
continue;
}
- if (!(ch->flags & XPC_C_CONNECTED)) {
- if (!(ch->flags & XPC_C_OPENREQUEST)) {
- DBUG_ON(ch->flags & XPC_C_SETUP);
+ if (!(ch_flags & XPC_C_CONNECTED)) {
+ if (!(ch_flags & XPC_C_OPENREQUEST)) {
+ DBUG_ON(ch_flags & XPC_C_SETUP);
(void) xpc_connect_channel(ch);
} else {
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -1305,8 +1384,8 @@
/*
- * XPC's heartbeat code calls this function to inform XPC that a partition has
- * gone down. XPC responds by tearing down the XPartition Communication
+ * XPC's heartbeat code calls this function to inform XPC that a partition is
+ * going down. XPC responds by tearing down the XPartition Communication
* infrastructure used for the just downed partition.
*
* XPC's heartbeat code will never call this function and xpc_partition_up()
@@ -1314,7 +1393,7 @@
* at the same time.
*/
void
-xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
+xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason)
{
unsigned long irq_flags;
int ch_number;
@@ -1330,12 +1409,11 @@
}
- /* disconnect all channels associated with the downed partition */
+ /* disconnect channels associated with the partition going down */
for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
ch = &part->channels[ch_number];
-
xpc_msgqueue_ref(ch);
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -1370,6 +1448,7 @@
* this partition.
*/
+ DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
DBUG_ON(atomic_read(&part->nchannels_active) != 0);
DBUG_ON(part->setup_state != XPC_P_SETUP);
part->setup_state = XPC_P_WTEARDOWN;
@@ -1428,19 +1507,11 @@
if (xpc_part_ref(part)) {
ch = &part->channels[ch_number];
- if (!(ch->flags & XPC_C_DISCONNECTING)) {
- DBUG_ON(ch->flags & XPC_C_OPENREQUEST);
- DBUG_ON(ch->flags & XPC_C_CONNECTED);
- DBUG_ON(ch->flags & XPC_C_SETUP);
-
- /*
- * Initiate the establishment of a connection
- * on the newly registered channel to the
- * remote partition.
- */
- xpc_wakeup_channel_mgr(part);
- }
-
+ /*
+ * Initiate the establishment of a connection on the
+ * newly registered channel to the remote partition.
+ */
+ xpc_wakeup_channel_mgr(part);
xpc_part_deref(part);
}
}
@@ -1450,9 +1521,6 @@
void
xpc_connected_callout(struct xpc_channel *ch)
{
- unsigned long irq_flags;
-
-
/* let the registerer know that a connection has been established */
if (ch->func != NULL) {
@@ -1465,10 +1533,6 @@
dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
}
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- ch->flags |= XPC_C_CONNECTCALLOUT;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
}
@@ -1506,8 +1570,12 @@
spin_lock_irqsave(&ch->lock, irq_flags);
- XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
+ if (!(ch->flags & XPC_C_DISCONNECTED)) {
+ ch->flags |= XPC_C_WDISCONNECT;
+
+ XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
&irq_flags);
+ }
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1523,8 +1591,9 @@
/*
* To disconnect a channel, and reflect it back to all who may be waiting.
*
- * >>> An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
- * >>> xpc_free_msgqueues().
+ * An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
+ * xpc_process_disconnect(), and if set, XPC_C_WDISCONNECT is cleared by
+ * xpc_disconnect_wait().
*
* THE CHANNEL IS TO BE LOCKED BY THE CALLER AND WILL REMAIN LOCKED UPON RETURN.
*/
@@ -1532,7 +1601,7 @@
xpc_disconnect_channel(const int line, struct xpc_channel *ch,
enum xpc_retval reason, unsigned long *irq_flags)
{
- u32 flags;
+ u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED);
DBUG_ON(!spin_is_locked(&ch->lock));
@@ -1547,37 +1616,28 @@
XPC_SET_REASON(ch, reason, line);
- flags = ch->flags;
+ ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
/* some of these may not have been set */
ch->flags &= ~(XPC_C_OPENREQUEST | XPC_C_OPENREPLY |
XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
XPC_C_CONNECTING | XPC_C_CONNECTED);
- ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
xpc_IPI_send_closerequest(ch, irq_flags);
- if (flags & XPC_C_CONNECTED) {
+ if (channel_was_connected) {
ch->flags |= XPC_C_WASCONNECTED;
}
- if (atomic_read(&ch->kthreads_idle) > 0) {
- /* wake all idle kthreads so they can exit */
- wake_up_all(&ch->idle_wq);
- }
-
spin_unlock_irqrestore(&ch->lock, *irq_flags);
-
- /* wake those waiting to allocate an entry from the local msg queue */
-
- if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) {
- wake_up(&ch->msg_allocate_wq);
+ /* wake all idle kthreads so they can exit */
+ if (atomic_read(&ch->kthreads_idle) > 0) {
+ wake_up_all(&ch->idle_wq);
}
- /* wake those waiting for notify completion */
-
- if (atomic_read(&ch->n_to_notify) > 0) {
- xpc_notify_senders(ch, reason, ch->w_local_GP.put);
+ /* wake those waiting to allocate an entry from the local msg queue */
+ if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) {
+ wake_up(&ch->msg_allocate_wq);
}
spin_lock_irqsave(&ch->lock, *irq_flags);
@@ -1585,23 +1645,24 @@
void
-xpc_disconnected_callout(struct xpc_channel *ch)
+xpc_disconnecting_callout(struct xpc_channel *ch)
{
/*
- * Let the channel's registerer know that the channel is now
+ * Let the channel's registerer know that the channel is being
* disconnected. We don't want to do this if the registerer was never
- * informed of a connection being made, unless the disconnect was for
- * abnormal reasons.
+ * informed of a connection being made.
*/
if (ch->func != NULL) {
- dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, "
- "channel=%d\n", ch->reason, ch->partid, ch->number);
+ dev_dbg(xpc_chan, "ch->func() called, reason=xpcDisconnecting,"
+ " partid=%d, channel=%d\n", ch->partid, ch->number);
- ch->func(ch->reason, ch->partid, ch->number, NULL, ch->key);
+ ch->func(xpcDisconnecting, ch->partid, ch->number, NULL,
+ ch->key);
- dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, "
- "channel=%d\n", ch->reason, ch->partid, ch->number);
+ dev_dbg(xpc_chan, "ch->func() returned, reason="
+ "xpcDisconnecting, partid=%d, channel=%d\n",
+ ch->partid, ch->number);
}
}
@@ -1848,7 +1909,7 @@
xpc_notify_func func, void *key)
{
enum xpc_retval ret = xpcSuccess;
- struct xpc_notify *notify = NULL; // >>> to keep the compiler happy!!
+ struct xpc_notify *notify = notify;
s64 put, msg_number = msg->number;
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index ed7c215..cece3c7 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -54,6 +54,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/reboot.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn_sal.h>
#include <asm/uaccess.h>
@@ -82,11 +83,17 @@
/* systune related variables for /proc/sys directories */
-static int xpc_hb_min = 1;
-static int xpc_hb_max = 10;
+static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
+static int xpc_hb_min_interval = 1;
+static int xpc_hb_max_interval = 10;
-static int xpc_hb_check_min = 10;
-static int xpc_hb_check_max = 120;
+static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
+static int xpc_hb_check_min_interval = 10;
+static int xpc_hb_check_max_interval = 120;
+
+int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
+static int xpc_disengage_request_min_timelimit = 0;
+static int xpc_disengage_request_max_timelimit = 120;
static ctl_table xpc_sys_xpc_hb_dir[] = {
{
@@ -99,7 +106,8 @@
&proc_dointvec_minmax,
&sysctl_intvec,
NULL,
- &xpc_hb_min, &xpc_hb_max
+ &xpc_hb_min_interval,
+ &xpc_hb_max_interval
},
{
2,
@@ -111,7 +119,8 @@
&proc_dointvec_minmax,
&sysctl_intvec,
NULL,
- &xpc_hb_check_min, &xpc_hb_check_max
+ &xpc_hb_check_min_interval,
+ &xpc_hb_check_max_interval
},
{0}
};
@@ -124,6 +133,19 @@
0555,
xpc_sys_xpc_hb_dir
},
+ {
+ 2,
+ "disengage_request_timelimit",
+ &xpc_disengage_request_timelimit,
+ sizeof(int),
+ 0644,
+ NULL,
+ &proc_dointvec_minmax,
+ &sysctl_intvec,
+ NULL,
+ &xpc_disengage_request_min_timelimit,
+ &xpc_disengage_request_max_timelimit
+ },
{0}
};
static ctl_table xpc_sys_dir[] = {
@@ -148,10 +170,10 @@
static unsigned long xpc_hb_check_timeout;
-/* xpc_hb_checker thread exited notification */
+/* notification that the xpc_hb_checker thread has exited */
static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited);
-/* xpc_discovery thread exited notification */
+/* notification that the xpc_discovery thread has exited */
static DECLARE_MUTEX_LOCKED(xpc_discovery_exited);
@@ -161,6 +183,30 @@
static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
+static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
+static struct notifier_block xpc_reboot_notifier = {
+ .notifier_call = xpc_system_reboot,
+};
+
+
+/*
+ * Timer function to enforce the timelimit on the partition disengage request.
+ */
+static void
+xpc_timeout_partition_disengage_request(unsigned long data)
+{
+ struct xpc_partition *part = (struct xpc_partition *) data;
+
+
+ DBUG_ON(jiffies < part->disengage_request_timeout);
+
+ (void) xpc_partition_disengaged(part);
+
+ DBUG_ON(part->disengage_request_timeout != 0);
+ DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
+}
+
+
/*
* Notify the heartbeat check thread that an IRQ has been received.
*/
@@ -214,12 +260,6 @@
while (!(volatile int) xpc_exiting) {
- /* wait for IRQ or timeout */
- (void) wait_event_interruptible(xpc_act_IRQ_wq,
- (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
- jiffies >= xpc_hb_check_timeout ||
- (volatile int) xpc_exiting));
-
dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
"been received\n",
(int) (xpc_hb_check_timeout - jiffies),
@@ -240,6 +280,7 @@
}
+ /* check for outstanding IRQs */
new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
force_IRQ = 0;
@@ -257,12 +298,18 @@
xpc_hb_check_timeout = jiffies +
(xpc_hb_check_interval * HZ);
}
+
+ /* wait for IRQ or timeout */
+ (void) wait_event_interruptible(xpc_act_IRQ_wq,
+ (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
+ jiffies >= xpc_hb_check_timeout ||
+ (volatile int) xpc_exiting));
}
dev_dbg(xpc_part, "heartbeat checker is exiting\n");
- /* mark this thread as inactive */
+ /* mark this thread as having exited */
up(&xpc_hb_checker_exited);
return 0;
}
@@ -282,7 +329,7 @@
dev_dbg(xpc_part, "discovery thread is exiting\n");
- /* mark this thread as inactive */
+ /* mark this thread as having exited */
up(&xpc_discovery_exited);
return 0;
}
@@ -309,7 +356,7 @@
"partition %d\n", XPC_PARTID(part));
/* wait a 1/4 of a second or so */
- msleep_interruptible(250);
+ (void) msleep_interruptible(250);
if (part->act_state == XPC_P_DEACTIVATING) {
return part->reason;
@@ -336,7 +383,8 @@
xpc_channel_mgr(struct xpc_partition *part)
{
while (part->act_state != XPC_P_DEACTIVATING ||
- atomic_read(&part->nchannels_active) > 0) {
+ atomic_read(&part->nchannels_active) > 0 ||
+ !xpc_partition_disengaged(part)) {
xpc_process_channel_activity(part);
@@ -360,7 +408,8 @@
(volatile u64) part->local_IPI_amo != 0 ||
((volatile u8) part->act_state ==
XPC_P_DEACTIVATING &&
- atomic_read(&part->nchannels_active) == 0)));
+ atomic_read(&part->nchannels_active) == 0 &&
+ xpc_partition_disengaged(part))));
atomic_set(&part->channel_mgr_requests, 1);
// >>> Does it need to wakeup periodically as well? In case we
@@ -482,7 +531,7 @@
return 0;
}
- XPC_ALLOW_HB(partid, xpc_vars);
+ xpc_allow_hb(partid, xpc_vars);
xpc_IPI_send_activated(part);
@@ -492,6 +541,7 @@
*/
(void) xpc_partition_up(part);
+ xpc_disallow_hb(partid, xpc_vars);
xpc_mark_partition_inactive(part);
if (part->reason == xpcReactivating) {
@@ -670,6 +720,7 @@
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
int n_needed;
+ unsigned long irq_flags;
daemonize("xpc%02dc%d", partid, ch_number);
@@ -680,11 +731,14 @@
ch = &part->channels[ch_number];
if (!(ch->flags & XPC_C_DISCONNECTING)) {
- DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
/* let registerer know that connection has been established */
- if (atomic_read(&ch->kthreads_assigned) == 1) {
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if (!(ch->flags & XPC_C_CONNECTCALLOUT)) {
+ ch->flags |= XPC_C_CONNECTCALLOUT;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+
xpc_connected_callout(ch);
/*
@@ -699,16 +753,28 @@
!(ch->flags & XPC_C_DISCONNECTING)) {
xpc_activate_kthreads(ch, n_needed);
}
+ } else {
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
}
xpc_kthread_waitmsgs(part, ch);
}
- if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
- ((ch->flags & XPC_C_CONNECTCALLOUT) ||
- (ch->reason != xpcUnregistering &&
- ch->reason != xpcOtherUnregistering))) {
- xpc_disconnected_callout(ch);
+ if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if ((ch->flags & XPC_C_CONNECTCALLOUT) &&
+ !(ch->flags & XPC_C_DISCONNECTCALLOUT)) {
+ ch->flags |= XPC_C_DISCONNECTCALLOUT;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ xpc_disconnecting_callout(ch);
+ } else {
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ }
+ if (atomic_dec_return(&part->nchannels_engaged) == 0) {
+ xpc_mark_partition_disengaged(part);
+ xpc_IPI_send_disengage(part);
+ }
}
@@ -740,12 +806,33 @@
unsigned long irq_flags;
pid_t pid;
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
+ struct xpc_partition *part = &xpc_partitions[ch->partid];
while (needed-- > 0) {
+
+ /*
+ * The following is done on behalf of the newly created
+ * kthread. That kthread is responsible for doing the
+ * counterpart to the following before it exits.
+ */
+ (void) xpc_part_ref(part);
+ xpc_msgqueue_ref(ch);
+ if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+ atomic_inc_return(&part->nchannels_engaged) == 1) {
+ xpc_mark_partition_engaged(part);
+ }
+
pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0);
if (pid < 0) {
/* the fork failed */
+ if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+ atomic_dec_return(&part->nchannels_engaged) == 0) {
+ xpc_mark_partition_disengaged(part);
+ xpc_IPI_send_disengage(part);
+ }
+ xpc_msgqueue_deref(ch);
+ xpc_part_deref(part);
if (atomic_read(&ch->kthreads_assigned) <
ch->kthreads_idle_limit) {
@@ -765,14 +852,6 @@
break;
}
- /*
- * The following is done on behalf of the newly created
- * kthread. That kthread is responsible for doing the
- * counterpart to the following before it exits.
- */
- (void) xpc_part_ref(&xpc_partitions[ch->partid]);
- xpc_msgqueue_ref(ch);
- atomic_inc(&ch->kthreads_assigned);
ch->kthreads_created++; // >>> temporary debug only!!!
}
}
@@ -781,87 +860,142 @@
void
xpc_disconnect_wait(int ch_number)
{
+ unsigned long irq_flags;
partid_t partid;
struct xpc_partition *part;
struct xpc_channel *ch;
+ int wakeup_channel_mgr;
/* now wait for all callouts to the caller's function to cease */
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
part = &xpc_partitions[partid];
- if (xpc_part_ref(part)) {
- ch = &part->channels[ch_number];
-
-// >>> how do we keep from falling into the window between our check and going
-// >>> down and coming back up where sema is re-inited?
- if (ch->flags & XPC_C_SETUP) {
- (void) down(&ch->teardown_sema);
- }
-
- xpc_part_deref(part);
+ if (!xpc_part_ref(part)) {
+ continue;
}
+
+ ch = &part->channels[ch_number];
+
+ if (!(ch->flags & XPC_C_WDISCONNECT)) {
+ xpc_part_deref(part);
+ continue;
+ }
+
+ (void) down(&ch->wdisconnect_sema);
+
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
+ wakeup_channel_mgr = 0;
+
+ if (ch->delayed_IPI_flags) {
+ if (part->act_state != XPC_P_DEACTIVATING) {
+ spin_lock(&part->IPI_lock);
+ XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+ ch->number, ch->delayed_IPI_flags);
+ spin_unlock(&part->IPI_lock);
+ wakeup_channel_mgr = 1;
+ }
+ ch->delayed_IPI_flags = 0;
+ }
+
+ ch->flags &= ~XPC_C_WDISCONNECT;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ if (wakeup_channel_mgr) {
+ xpc_wakeup_channel_mgr(part);
+ }
+
+ xpc_part_deref(part);
}
}
static void
-xpc_do_exit(void)
+xpc_do_exit(enum xpc_retval reason)
{
partid_t partid;
int active_part_count;
struct xpc_partition *part;
+ unsigned long printmsg_time;
- /* now it's time to eliminate our heartbeat */
- del_timer_sync(&xpc_hb_timer);
- xpc_vars->heartbeating_to_mask = 0;
-
- /* indicate to others that our reserved page is uninitialized */
- xpc_rsvd_page->vars_pa = 0;
+ /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
+ DBUG_ON(xpc_exiting == 1);
/*
- * Ignore all incoming interrupts. Without interupts the heartbeat
- * checker won't activate any new partitions that may come up.
- */
- free_irq(SGI_XPC_ACTIVATE, NULL);
-
- /*
- * Cause the heartbeat checker and the discovery threads to exit.
- * We don't want them attempting to activate new partitions as we
- * try to deactivate the existing ones.
+ * Let the heartbeat checker thread and the discovery thread
+ * (if one is running) know that they should exit. Also wake up
+ * the heartbeat checker thread in case it's sleeping.
*/
xpc_exiting = 1;
wake_up_interruptible(&xpc_act_IRQ_wq);
- /* wait for the heartbeat checker thread to mark itself inactive */
- down(&xpc_hb_checker_exited);
+ /* ignore all incoming interrupts */
+ free_irq(SGI_XPC_ACTIVATE, NULL);
- /* wait for the discovery thread to mark itself inactive */
+ /* wait for the discovery thread to exit */
down(&xpc_discovery_exited);
+ /* wait for the heartbeat checker thread to exit */
+ down(&xpc_hb_checker_exited);
- msleep_interruptible(300);
+
+ /* sleep for a 1/3 of a second or so */
+ (void) msleep_interruptible(300);
/* wait for all partitions to become inactive */
+ printmsg_time = jiffies;
+
do {
active_part_count = 0;
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
part = &xpc_partitions[partid];
- if (part->act_state != XPC_P_INACTIVE) {
- active_part_count++;
- XPC_DEACTIVATE_PARTITION(part, xpcUnloading);
+ if (xpc_partition_disengaged(part) &&
+ part->act_state == XPC_P_INACTIVE) {
+ continue;
}
+
+ active_part_count++;
+
+ XPC_DEACTIVATE_PARTITION(part, reason);
}
- if (active_part_count)
- msleep_interruptible(300);
- } while (active_part_count > 0);
+ if (active_part_count == 0) {
+ break;
+ }
+ if (jiffies >= printmsg_time) {
+ dev_info(xpc_part, "waiting for partitions to "
+ "deactivate/disengage, active count=%d, remote "
+ "engaged=0x%lx\n", active_part_count,
+ xpc_partition_engaged(1UL << partid));
+
+ printmsg_time = jiffies +
+ (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+ }
+
+ /* sleep for a 1/3 of a second or so */
+ (void) msleep_interruptible(300);
+
+ } while (1);
+
+ DBUG_ON(xpc_partition_engaged(-1UL));
+
+
+ /* indicate to others that our reserved page is uninitialized */
+ xpc_rsvd_page->vars_pa = 0;
+
+ /* now it's time to eliminate our heartbeat */
+ del_timer_sync(&xpc_hb_timer);
+ DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+
+ /* take ourselves off of the reboot_notifier_list */
+ (void) unregister_reboot_notifier(&xpc_reboot_notifier);
/* close down protections for IPI operations */
xpc_restrict_IPI_ops();
@@ -876,6 +1010,34 @@
}
+/*
+ * This function is called when the system is being rebooted.
+ */
+static int
+xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
+{
+ enum xpc_retval reason;
+
+
+ switch (event) {
+ case SYS_RESTART:
+ reason = xpcSystemReboot;
+ break;
+ case SYS_HALT:
+ reason = xpcSystemHalt;
+ break;
+ case SYS_POWER_OFF:
+ reason = xpcSystemPoweroff;
+ break;
+ default:
+ reason = xpcSystemGoingDown;
+ }
+
+ xpc_do_exit(reason);
+ return NOTIFY_DONE;
+}
+
+
int __init
xpc_init(void)
{
@@ -891,11 +1053,11 @@
/*
* xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
- * both a partition's reserved page and its XPC variables. Its size was
- * based on the size of a reserved page. So we need to ensure that the
- * XPC variables will fit as well.
+ * various portions of a partition's reserved page. Its size is based
+ * on the size of the reserved page header and part_nasids mask. So we
+ * need to ensure that the other items will fit as well.
*/
- if (XPC_VARS_ALIGNED_SIZE > XPC_RSVD_PAGE_ALIGNED_SIZE) {
+ if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
return -EPERM;
}
@@ -924,6 +1086,12 @@
spin_lock_init(&part->act_lock);
part->act_state = XPC_P_INACTIVE;
XPC_SET_REASON(part, 0, 0);
+
+ init_timer(&part->disengage_request_timer);
+ part->disengage_request_timer.function =
+ xpc_timeout_partition_disengage_request;
+ part->disengage_request_timer.data = (unsigned long) part;
+
part->setup_state = XPC_P_UNSET;
init_waitqueue_head(&part->teardown_wq);
atomic_set(&part->references, 0);
@@ -980,6 +1148,13 @@
}
+ /* add ourselves to the reboot_notifier_list */
+ ret = register_reboot_notifier(&xpc_reboot_notifier);
+ if (ret != 0) {
+ dev_warn(xpc_part, "can't register reboot notifier\n");
+ }
+
+
/*
* Set the beating to other partitions into motion. This is
* the last requirement for other partitions' discovery to
@@ -1001,6 +1176,9 @@
/* indicate to others that our reserved page is uninitialized */
xpc_rsvd_page->vars_pa = 0;
+ /* take ourselves off of the reboot_notifier_list */
+ (void) unregister_reboot_notifier(&xpc_reboot_notifier);
+
del_timer_sync(&xpc_hb_timer);
free_irq(SGI_XPC_ACTIVATE, NULL);
xpc_restrict_IPI_ops();
@@ -1024,7 +1202,7 @@
/* mark this new thread as a non-starter */
up(&xpc_discovery_exited);
- xpc_do_exit();
+ xpc_do_exit(xpcUnloading);
return -EBUSY;
}
@@ -1043,7 +1221,7 @@
void __exit
xpc_exit(void)
{
- xpc_do_exit();
+ xpc_do_exit(xpcUnloading);
}
module_exit(xpc_exit);
@@ -1060,3 +1238,7 @@
MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
"heartbeat checks.");
+module_param(xpc_disengage_request_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
+ "for disengage request to complete.");
+
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 578265e..581e113 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -44,16 +44,19 @@
/* original protection values for each node */
-u64 xpc_prot_vec[MAX_COMPACT_NODES];
+u64 xpc_prot_vec[MAX_NUMNODES];
-/* this partition's reserved page */
+/* this partition's reserved page pointers */
struct xpc_rsvd_page *xpc_rsvd_page;
-
-/* this partition's XPC variables (within the reserved page) */
+static u64 *xpc_part_nasids;
+static u64 *xpc_mach_nasids;
struct xpc_vars *xpc_vars;
struct xpc_vars_part *xpc_vars_part;
+static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */
+static int xp_nasid_mask_words; /* actual size in words of nasid mask */
+
/*
* For performance reasons, each entry of xpc_partitions[] is cacheline
@@ -65,20 +68,16 @@
/*
- * Generic buffer used to store a local copy of the remote partitions
- * reserved page or XPC variables.
+ * Generic buffer used to store a local copy of portions of a remote
+ * partition's reserved page (either its header and part_nasids mask,
+ * or its vars).
*
* xpc_discovery runs only once and is a seperate thread that is
* very likely going to be processing in parallel with receiving
* interrupts.
*/
-char ____cacheline_aligned
- xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE];
-
-
-/* systune related variables */
-int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
-int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
+char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
+ XP_NASID_MASK_BYTES];
/*
@@ -86,13 +85,16 @@
* for that nasid. This function returns 0 on any error.
*/
static u64
-xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
+xpc_get_rsvd_page_pa(int nasid)
{
bte_result_t bte_res;
s64 status;
u64 cookie = 0;
u64 rp_pa = nasid; /* seed with nasid */
u64 len = 0;
+ u64 buf = buf;
+ u64 buf_len = 0;
+ void *buf_base = NULL;
while (1) {
@@ -108,13 +110,22 @@
break;
}
- if (len > buf_size) {
- dev_err(xpc_part, "len (=0x%016lx) > buf_size\n", len);
- status = SALRET_ERROR;
- break;
+ if (L1_CACHE_ALIGN(len) > buf_len) {
+ if (buf_base != NULL) {
+ kfree(buf_base);
+ }
+ buf_len = L1_CACHE_ALIGN(len);
+ buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len,
+ GFP_KERNEL, &buf_base);
+ if (buf_base == NULL) {
+ dev_err(xpc_part, "unable to kmalloc "
+ "len=0x%016lx\n", buf_len);
+ status = SALRET_ERROR;
+ break;
+ }
}
- bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_size,
+ bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bte_res != BTE_SUCCESS) {
dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
@@ -123,6 +134,10 @@
}
}
+ if (buf_base != NULL) {
+ kfree(buf_base);
+ }
+
if (status != SALRET_OK) {
rp_pa = 0;
}
@@ -141,15 +156,15 @@
{
struct xpc_rsvd_page *rp;
AMO_t *amos_page;
- u64 rp_pa, next_cl, nasid_array = 0;
+ u64 rp_pa, nasid_array = 0;
int i, ret;
/* get the local reserved page's address */
- rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0),
- (u64) xpc_remote_copy_buffer,
- XPC_RSVD_PAGE_ALIGNED_SIZE);
+ preempt_disable();
+ rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+ preempt_enable();
if (rp_pa == 0) {
dev_err(xpc_part, "SAL failed to locate the reserved page\n");
return NULL;
@@ -164,12 +179,19 @@
rp->version = XPC_RP_VERSION;
- /*
- * Place the XPC variables on the cache line following the
- * reserved page structure.
- */
- next_cl = (u64) rp + XPC_RSVD_PAGE_ALIGNED_SIZE;
- xpc_vars = (struct xpc_vars *) next_cl;
+ /* establish the actual sizes of the nasid masks */
+ if (rp->SAL_version == 1) {
+ /* SAL_version 1 didn't set the nasids_size field */
+ rp->nasids_size = 128;
+ }
+ xp_nasid_mask_bytes = rp->nasids_size;
+ xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+
+ /* setup the pointers to the various items in the reserved page */
+ xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
+ xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
+ xpc_vars = XPC_RP_VARS(rp);
+ xpc_vars_part = XPC_RP_VARS_PART(rp);
/*
* Before clearing xpc_vars, see if a page of AMOs had been previously
@@ -221,33 +243,32 @@
amos_page = (AMO_t *) TO_AMO((u64) amos_page);
}
+ /* clear xpc_vars */
memset(xpc_vars, 0, sizeof(struct xpc_vars));
- /*
- * Place the XPC per partition specific variables on the cache line
- * following the XPC variables structure.
- */
- next_cl += XPC_VARS_ALIGNED_SIZE;
- memset((u64 *) next_cl, 0, sizeof(struct xpc_vars_part) *
- XP_MAX_PARTITIONS);
- xpc_vars_part = (struct xpc_vars_part *) next_cl;
- xpc_vars->vars_part_pa = __pa(next_cl);
-
xpc_vars->version = XPC_V_VERSION;
xpc_vars->act_nasid = cpuid_to_nasid(0);
xpc_vars->act_phys_cpuid = cpu_physical_id(0);
+ xpc_vars->vars_part_pa = __pa(xpc_vars_part);
+ xpc_vars->amos_page_pa = ia64_tpa((u64) amos_page);
xpc_vars->amos_page = amos_page; /* save for next load of XPC */
- /*
- * Initialize the activation related AMO variables.
- */
- xpc_vars->act_amos = xpc_IPI_init(XP_MAX_PARTITIONS);
- for (i = 1; i < XP_NASID_MASK_WORDS; i++) {
- xpc_IPI_init(i + XP_MAX_PARTITIONS);
+ /* clear xpc_vars_part */
+ memset((u64 *) xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
+ XP_MAX_PARTITIONS);
+
+ /* initialize the activate IRQ related AMO variables */
+ for (i = 0; i < xp_nasid_mask_words; i++) {
+ (void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
}
- /* export AMO page's physical address to other partitions */
- xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page);
+
+ /* initialize the engaged remote partitions related AMO variables */
+ (void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
+ (void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
+
+ /* timestamp of when reserved page was setup by XPC */
+ rp->stamp = CURRENT_TIME;
/*
* This signifies to the remote partition that our reserved
@@ -387,6 +408,11 @@
remote_vars = (struct xpc_vars *) xpc_remote_copy_buffer;
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+
+ if (xpc_exiting) {
+ break;
+ }
+
if (partid == sn_partition_id) {
continue;
}
@@ -401,7 +427,7 @@
/* pull the remote_hb cache line */
bres = xp_bte_copy(part->remote_vars_pa,
ia64_tpa((u64) remote_vars),
- XPC_VARS_ALIGNED_SIZE,
+ XPC_RP_VARS_SIZE,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
XPC_DEACTIVATE_PARTITION(part,
@@ -417,7 +443,7 @@
if (((remote_vars->heartbeat == part->last_heartbeat) &&
(remote_vars->kdb_status == 0)) ||
- !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
+ !xpc_hb_allowed(sn_partition_id, remote_vars)) {
XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat);
continue;
@@ -429,31 +455,31 @@
/*
- * Get a copy of the remote partition's rsvd page.
+ * Get a copy of a portion of the remote partition's rsvd page.
*
* remote_rp points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RSVD_PAGE_ALIGNED_SIZE.
+ * is large enough to contain a copy of their reserved page header and
+ * part_nasids mask.
*/
static enum xpc_retval
xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
- struct xpc_rsvd_page *remote_rp, u64 *remote_rsvd_page_pa)
+ struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
{
int bres, i;
/* get the reserved page's physical address */
- *remote_rsvd_page_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp,
- XPC_RSVD_PAGE_ALIGNED_SIZE);
- if (*remote_rsvd_page_pa == 0) {
+ *remote_rp_pa = xpc_get_rsvd_page_pa(nasid);
+ if (*remote_rp_pa == 0) {
return xpcNoRsvdPageAddr;
}
- /* pull over the reserved page structure */
+ /* pull over the reserved page header and part_nasids mask */
- bres = xp_bte_copy(*remote_rsvd_page_pa, ia64_tpa((u64) remote_rp),
- XPC_RSVD_PAGE_ALIGNED_SIZE,
+ bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
+ XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
return xpc_map_bte_errors(bres);
@@ -461,8 +487,11 @@
if (discovered_nasids != NULL) {
- for (i = 0; i < XP_NASID_MASK_WORDS; i++) {
- discovered_nasids[i] |= remote_rp->part_nasids[i];
+ u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
+
+
+ for (i = 0; i < xp_nasid_mask_words; i++) {
+ discovered_nasids[i] |= remote_part_nasids[i];
}
}
@@ -489,10 +518,10 @@
/*
- * Get a copy of the remote partition's XPC variables.
+ * Get a copy of the remote partition's XPC variables from the reserved page.
*
* remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_VARS_ALIGNED_SIZE.
+ * assumed to be of size XPC_RP_VARS_SIZE.
*/
static enum xpc_retval
xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
@@ -508,7 +537,7 @@
/* pull over the cross partition variables */
bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
- XPC_VARS_ALIGNED_SIZE,
+ XPC_RP_VARS_SIZE,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
return xpc_map_bte_errors(bres);
@@ -524,7 +553,56 @@
/*
- * Prior code has determine the nasid which generated an IPI. Inspect
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
+ struct timespec *remote_rp_stamp, u64 remote_rp_pa,
+ u64 remote_vars_pa, struct xpc_vars *remote_vars)
+{
+ part->remote_rp_version = remote_rp_version;
+ dev_dbg(xpc_part, " remote_rp_version = 0x%016lx\n",
+ part->remote_rp_version);
+
+ part->remote_rp_stamp = *remote_rp_stamp;
+ dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
+ part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
+
+ part->remote_rp_pa = remote_rp_pa;
+ dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+ part->remote_vars_pa = remote_vars_pa;
+ dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
+ part->remote_vars_pa);
+
+ part->last_heartbeat = remote_vars->heartbeat;
+ dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
+ part->last_heartbeat);
+
+ part->remote_vars_part_pa = remote_vars->vars_part_pa;
+ dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n",
+ part->remote_vars_part_pa);
+
+ part->remote_act_nasid = remote_vars->act_nasid;
+ dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n",
+ part->remote_act_nasid);
+
+ part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
+ dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n",
+ part->remote_act_phys_cpuid);
+
+ part->remote_amos_page_pa = remote_vars->amos_page_pa;
+ dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n",
+ part->remote_amos_page_pa);
+
+ part->remote_vars_version = remote_vars->version;
+ dev_dbg(xpc_part, " remote_vars_version = 0x%x\n",
+ part->remote_vars_version);
+}
+
+
+/*
+ * Prior code has determined the nasid which generated an IPI. Inspect
* that nasid to determine if its partition needs to be activated or
* deactivated.
*
@@ -542,8 +620,12 @@
{
struct xpc_rsvd_page *remote_rp;
struct xpc_vars *remote_vars;
- u64 remote_rsvd_page_pa;
+ u64 remote_rp_pa;
u64 remote_vars_pa;
+ int remote_rp_version;
+ int reactivate = 0;
+ int stamp_diff;
+ struct timespec remote_rp_stamp = { 0, 0 };
partid_t partid;
struct xpc_partition *part;
enum xpc_retval ret;
@@ -553,7 +635,7 @@
remote_rp = (struct xpc_rsvd_page *) xpc_remote_copy_buffer;
- ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rsvd_page_pa);
+ ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
if (ret != xpcSuccess) {
dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
"which sent interrupt, reason=%d\n", nasid, ret);
@@ -561,6 +643,10 @@
}
remote_vars_pa = remote_rp->vars_pa;
+ remote_rp_version = remote_rp->version;
+ if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+ remote_rp_stamp = remote_rp->stamp;
+ }
partid = remote_rp->partid;
part = &xpc_partitions[partid];
@@ -586,44 +672,117 @@
"%ld:0x%lx\n", (int) nasid, (int) partid, part->act_IRQ_rcvd,
remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
+ if (xpc_partition_disengaged(part) &&
+ part->act_state == XPC_P_INACTIVE) {
- if (part->act_state == XPC_P_INACTIVE) {
+ xpc_update_partition_info(part, remote_rp_version,
+ &remote_rp_stamp, remote_rp_pa,
+ remote_vars_pa, remote_vars);
- part->remote_rp_pa = remote_rsvd_page_pa;
- dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n",
- part->remote_rp_pa);
-
- part->remote_vars_pa = remote_vars_pa;
- dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
- part->remote_vars_pa);
-
- part->last_heartbeat = remote_vars->heartbeat;
- dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
- part->last_heartbeat);
-
- part->remote_vars_part_pa = remote_vars->vars_part_pa;
- dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n",
- part->remote_vars_part_pa);
-
- part->remote_act_nasid = remote_vars->act_nasid;
- dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n",
- part->remote_act_nasid);
-
- part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
- dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n",
- part->remote_act_phys_cpuid);
-
- part->remote_amos_page_pa = remote_vars->amos_page_pa;
- dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n",
- part->remote_amos_page_pa);
+ if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+ if (xpc_partition_disengage_requested(1UL << partid)) {
+ /*
+ * Other side is waiting on us to disengage,
+ * even though we already have.
+ */
+ return;
+ }
+ } else {
+ /* other side doesn't support disengage requests */
+ xpc_clear_partition_disengage_request(1UL << partid);
+ }
xpc_activate_partition(part);
+ return;
+ }
- } else if (part->remote_amos_page_pa != remote_vars->amos_page_pa ||
- !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
+ DBUG_ON(part->remote_rp_version == 0);
+ DBUG_ON(part->remote_vars_version == 0);
+ if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
+ DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
+ remote_vars_version));
+
+ if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+ DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
+ version));
+ /* see if the other side rebooted */
+ if (part->remote_amos_page_pa ==
+ remote_vars->amos_page_pa &&
+ xpc_hb_allowed(sn_partition_id,
+ remote_vars)) {
+ /* doesn't look that way, so ignore the IPI */
+ return;
+ }
+ }
+
+ /*
+ * Other side rebooted and previous XPC didn't support the
+ * disengage request, so we don't need to do anything special.
+ */
+
+ xpc_update_partition_info(part, remote_rp_version,
+ &remote_rp_stamp, remote_rp_pa,
+ remote_vars_pa, remote_vars);
part->reactivate_nasid = nasid;
XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+ return;
+ }
+
+ DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
+
+ if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+ DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
+
+ /*
+ * Other side rebooted and previous XPC did support the
+ * disengage request, but the new one doesn't.
+ */
+
+ xpc_clear_partition_engaged(1UL << partid);
+ xpc_clear_partition_disengage_request(1UL << partid);
+
+ xpc_update_partition_info(part, remote_rp_version,
+ &remote_rp_stamp, remote_rp_pa,
+ remote_vars_pa, remote_vars);
+ reactivate = 1;
+
+ } else {
+ DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
+
+ stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
+ &remote_rp_stamp);
+ if (stamp_diff != 0) {
+ DBUG_ON(stamp_diff >= 0);
+
+ /*
+ * Other side rebooted and the previous XPC did support
+ * the disengage request, as does the new one.
+ */
+
+ DBUG_ON(xpc_partition_engaged(1UL << partid));
+ DBUG_ON(xpc_partition_disengage_requested(1UL <<
+ partid));
+
+ xpc_update_partition_info(part, remote_rp_version,
+ &remote_rp_stamp, remote_rp_pa,
+ remote_vars_pa, remote_vars);
+ reactivate = 1;
+ }
+ }
+
+ if (!xpc_partition_disengaged(part)) {
+ /* still waiting on other side to disengage from us */
+ return;
+ }
+
+ if (reactivate) {
+ part->reactivate_nasid = nasid;
+ XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+
+ } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
+ xpc_partition_disengage_requested(1UL << partid)) {
+ XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown);
}
}
@@ -643,14 +802,17 @@
u64 nasid; /* remote nasid */
int n_IRQs_detected = 0;
AMO_t *act_amos;
- struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
- act_amos = xpc_vars->act_amos;
+ act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
/* scan through act AMO variable looking for non-zero entries */
- for (word = 0; word < XP_NASID_MASK_WORDS; word++) {
+ for (word = 0; word < xp_nasid_mask_words; word++) {
+
+ if (xpc_exiting) {
+ break;
+ }
nasid_mask = xpc_IPI_receive(&act_amos[word]);
if (nasid_mask == 0) {
@@ -668,7 +830,7 @@
* remote nasid in our reserved pages machine mask.
* This is used in the event of module reload.
*/
- rp->mach_nasids[word] |= nasid_mask;
+ xpc_mach_nasids[word] |= nasid_mask;
/* locate the nasid(s) which sent interrupts */
@@ -688,6 +850,55 @@
/*
+ * See if the other side has responded to a partition disengage request
+ * from us.
+ */
+int
+xpc_partition_disengaged(struct xpc_partition *part)
+{
+ partid_t partid = XPC_PARTID(part);
+ int disengaged;
+
+
+ disengaged = (xpc_partition_engaged(1UL << partid) == 0);
+ if (part->disengage_request_timeout) {
+ if (!disengaged) {
+ if (jiffies < part->disengage_request_timeout) {
+ /* timelimit hasn't been reached yet */
+ return 0;
+ }
+
+ /*
+ * Other side hasn't responded to our disengage
+ * request in a timely fashion, so assume it's dead.
+ */
+
+ xpc_clear_partition_engaged(1UL << partid);
+ disengaged = 1;
+ }
+ part->disengage_request_timeout = 0;
+
+ /* cancel the timer function, provided it's not us */
+ if (!in_interrupt()) {
+ del_singleshot_timer_sync(&part->
+ disengage_request_timer);
+ }
+
+ DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
+ part->act_state != XPC_P_INACTIVE);
+ if (part->act_state != XPC_P_INACTIVE) {
+ xpc_wakeup_channel_mgr(part);
+ }
+
+ if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+ xpc_cancel_partition_disengage_request(part);
+ }
+ }
+ return disengaged;
+}
+
+
+/*
* Mark specified partition as active.
*/
enum xpc_retval
@@ -721,7 +932,6 @@
enum xpc_retval reason)
{
unsigned long irq_flags;
- partid_t partid = XPC_PARTID(part);
spin_lock_irqsave(&part->act_lock, irq_flags);
@@ -749,17 +959,27 @@
spin_unlock_irqrestore(&part->act_lock, irq_flags);
- XPC_DISALLOW_HB(partid, xpc_vars);
+ if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+ xpc_request_partition_disengage(part);
+ xpc_IPI_send_disengage(part);
- dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid,
- reason);
+ /* set a timelimit on the disengage request */
+ part->disengage_request_timeout = jiffies +
+ (xpc_disengage_request_timelimit * HZ);
+ part->disengage_request_timer.expires =
+ part->disengage_request_timeout;
+ add_timer(&part->disengage_request_timer);
+ }
- xpc_partition_down(part, reason);
+ dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
+ XPC_PARTID(part), reason);
+
+ xpc_partition_going_down(part, reason);
}
/*
- * Mark specified partition as active.
+ * Mark specified partition as inactive.
*/
void
xpc_mark_partition_inactive(struct xpc_partition *part)
@@ -792,9 +1012,10 @@
void *remote_rp_base;
struct xpc_rsvd_page *remote_rp;
struct xpc_vars *remote_vars;
- u64 remote_rsvd_page_pa;
+ u64 remote_rp_pa;
u64 remote_vars_pa;
int region;
+ int region_size;
int max_regions;
int nasid;
struct xpc_rsvd_page *rp;
@@ -804,7 +1025,8 @@
enum xpc_retval ret;
- remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RSVD_PAGE_ALIGNED_SIZE,
+ remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
+ xp_nasid_mask_bytes,
GFP_KERNEL, &remote_rp_base);
if (remote_rp == NULL) {
return;
@@ -812,13 +1034,13 @@
remote_vars = (struct xpc_vars *) remote_rp;
- discovered_nasids = kmalloc(sizeof(u64) * XP_NASID_MASK_WORDS,
+ discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words,
GFP_KERNEL);
if (discovered_nasids == NULL) {
kfree(remote_rp_base);
return;
}
- memset(discovered_nasids, 0, sizeof(u64) * XP_NASID_MASK_WORDS);
+ memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words);
rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
@@ -827,11 +1049,19 @@
* nodes that can comprise an access protection grouping. The access
* protection is in regards to memory, IOI and IPI.
*/
-//>>> move the next two #defines into either include/asm-ia64/sn/arch.h or
-//>>> include/asm-ia64/sn/addrs.h
-#define SH1_MAX_REGIONS 64
-#define SH2_MAX_REGIONS 256
- max_regions = is_shub2() ? SH2_MAX_REGIONS : SH1_MAX_REGIONS;
+ max_regions = 64;
+ region_size = sn_region_size;
+
+ switch (region_size) {
+ case 128:
+ max_regions *= 2;
+ case 64:
+ max_regions *= 2;
+ case 32:
+ max_regions *= 2;
+ region_size = 16;
+ DBUG_ON(!is_shub2());
+ }
for (region = 0; region < max_regions; region++) {
@@ -841,8 +1071,8 @@
dev_dbg(xpc_part, "searching region %d\n", region);
- for (nasid = (region * sn_region_size * 2);
- nasid < ((region + 1) * sn_region_size * 2);
+ for (nasid = (region * region_size * 2);
+ nasid < ((region + 1) * region_size * 2);
nasid += 2) {
if ((volatile int) xpc_exiting) {
@@ -852,14 +1082,14 @@
dev_dbg(xpc_part, "checking nasid %d\n", nasid);
- if (XPC_NASID_IN_ARRAY(nasid, rp->part_nasids)) {
+ if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
dev_dbg(xpc_part, "PROM indicates Nasid %d is "
"part of the local partition; skipping "
"region\n", nasid);
break;
}
- if (!(XPC_NASID_IN_ARRAY(nasid, rp->mach_nasids))) {
+ if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
dev_dbg(xpc_part, "PROM indicates Nasid %d was "
"not on Numa-Link network at reset\n",
nasid);
@@ -877,7 +1107,7 @@
/* pull over the reserved page structure */
ret = xpc_get_remote_rp(nasid, discovered_nasids,
- remote_rp, &remote_rsvd_page_pa);
+ remote_rp, &remote_rp_pa);
if (ret != xpcSuccess) {
dev_dbg(xpc_part, "unable to get reserved page "
"from nasid %d, reason=%d\n", nasid,
@@ -948,6 +1178,13 @@
remote_vars->act_nasid,
remote_vars->act_phys_cpuid);
+ if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
+ version)) {
+ part->remote_amos_page_pa =
+ remote_vars->amos_page_pa;
+ xpc_mark_partition_disengaged(part);
+ xpc_cancel_partition_disengage_request(part);
+ }
xpc_IPI_send_activate(remote_vars);
}
}
@@ -974,12 +1211,12 @@
return xpcPartitionDown;
}
- part_nasid_pa = part->remote_rp_pa +
- (u64) &((struct xpc_rsvd_page *) 0)->part_nasids;
+ memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
+
+ part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
- L1_CACHE_ALIGN(XP_NASID_MASK_BYTES),
- (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+ xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
return xpc_map_bte_errors(bte_res);
}
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 0e4b9ad..9bf9f23 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -75,7 +75,7 @@
* more information.
*/
void *sn_dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int flags)
+ dma_addr_t * dma_handle, gfp_t flags)
{
void *cpuaddr;
unsigned long phys_addr;
@@ -326,6 +326,29 @@
{
unsigned long addr;
int ret;
+ struct ia64_sal_retval isrv;
+
+ /*
+ * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+ * around hw issues at the pci bus level. SGI proms older than
+ * 4.10 don't implment this.
+ */
+
+ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+ pci_domain_nr(bus), bus->number,
+ 0, /* io */
+ 0, /* read */
+ port, size, __pa(val));
+
+ if (isrv.status == 0)
+ return size;
+
+ /*
+ * If the above failed, retry using the SAL_PROBE call which should
+ * be present in all proms (but which cannot work round PCI chipset
+ * bugs). This code is retained for compatability with old
+ * pre-4.10 proms, and should be removed at some point in the future.
+ */
if (!SN_PCIBUS_BUSSOFT(bus))
return -ENODEV;
@@ -349,6 +372,29 @@
int ret = size;
unsigned long paddr;
unsigned long *addr;
+ struct ia64_sal_retval isrv;
+
+ /*
+ * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+ * around hw issues at the pci bus level. SGI proms older than
+ * 4.10 don't implment this.
+ */
+
+ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+ pci_domain_nr(bus), bus->number,
+ 0, /* io */
+ 1, /* write */
+ port, size, __pa(&val));
+
+ if (isrv.status == 0)
+ return size;
+
+ /*
+ * If the above failed, retry using the SAL_PROBE call which should
+ * be present in all proms (but which cannot work round PCI chipset
+ * bugs). This code is retained for compatability with old
+ * pre-4.10 proms, and should be removed at some point in the future.
+ */
if (!SN_PCIBUS_BUSSOFT(bus)) {
ret = -ENODEV;
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
index 21426d0..4f718c3 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
@@ -8,6 +8,7 @@
#include <linux/interrupt.h>
#include <linux/types.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcibr_provider.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/pcidev.h>
@@ -29,10 +30,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_control &= ~bits;
+ __sn_clrq_relaxed(&ptr->tio.cp_control, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_wid_control &= ~bits;
+ __sn_clrq_relaxed(&ptr->pic.p_wid_control, bits);
break;
default:
panic
@@ -49,10 +50,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_control |= bits;
+ __sn_setq_relaxed(&ptr->tio.cp_control, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_wid_control |= bits;
+ __sn_setq_relaxed(&ptr->pic.p_wid_control, bits);
break;
default:
panic
@@ -73,10 +74,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_tflush;
+ ret = __sn_readq_relaxed(&ptr->tio.cp_tflush);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_wid_tflush;
+ ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush);
break;
default:
panic
@@ -103,10 +104,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_int_status;
+ ret = __sn_readq_relaxed(&ptr->tio.cp_int_status);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_int_status;
+ ret = __sn_readq_relaxed(&ptr->pic.p_int_status);
break;
default:
panic
@@ -127,10 +128,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_enable &= ~bits;
+ __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_enable &= ~bits;
+ __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits);
break;
default:
panic
@@ -147,10 +148,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_enable |= bits;
+ __sn_setq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_enable |= bits;
+ __sn_setq_relaxed(&ptr->pic.p_int_enable, bits);
break;
default:
panic
@@ -171,14 +172,16 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR;
- ptr->tio.cp_int_addr[int_n] |=
- (addr & TIOCP_HOST_INTR_ADDR);
+ __sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n],
+ TIOCP_HOST_INTR_ADDR);
+ __sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n],
+ (addr & TIOCP_HOST_INTR_ADDR));
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR;
- ptr->pic.p_int_addr[int_n] |=
- (addr & PIC_HOST_INTR_ADDR);
+ __sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n],
+ PIC_HOST_INTR_ADDR);
+ __sn_setq_relaxed(&ptr->pic.p_int_addr[int_n],
+ (addr & PIC_HOST_INTR_ADDR));
break;
default:
panic
@@ -198,10 +201,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_force_pin[int_n] = 1;
+ writeq(1, &ptr->tio.cp_force_pin[int_n]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_force_pin[int_n] = 1;
+ writeq(1, &ptr->pic.p_force_pin[int_n]);
break;
default:
panic
@@ -222,10 +225,12 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_wr_req_buf[device];
+ ret =
+ __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_wr_req_buf[device];
+ ret =
+ __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]);
break;
default:
panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr);
@@ -244,10 +249,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val;
+ writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val;
+ writeq(val, &ptr->pic.p_int_ate_ram[ate_index]);
break;
default:
panic
@@ -265,12 +270,10 @@
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret =
- (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]);
+ ret = &ptr->tio.cp_int_ate_ram[ate_index];
break;
case PCIBR_BRIDGETYPE_PIC:
- ret =
- (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]);
+ ret = &ptr->pic.p_int_ate_ram[ate_index];
break;
default:
panic
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 19bced3..46b646a 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioca_provider.h>
@@ -37,7 +38,7 @@
uint64_t offset;
struct page *tmp;
struct tioca_common *tioca_common;
- volatile struct tioca *ca_base;
+ struct tioca *ca_base;
tioca_common = tioca_kern->ca_common;
ca_base = (struct tioca *)tioca_common->ca_common.bs_base;
@@ -174,27 +175,29 @@
* DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029
*/
- ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY; /* PV895469 ? */
- ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
- ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT);
+ __sn_setq_relaxed(&ca_base->ca_control1,
+ CA_AGPDMA_OP_ENB_COMBDELAY); /* PV895469 ? */
+ __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+ __sn_setq_relaxed(&ca_base->ca_control2,
+ (0x2ull << CA_GART_MEM_PARAM_SHFT));
tioca_kern->ca_gart_iscoherent = 1;
- ca_base->ca_control2 &=
- ~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB);
+ __sn_clrq_relaxed(&ca_base->ca_control2,
+ (CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB));
/*
* Unmask GART fetch error interrupts. Clear residual errors first.
*/
- ca_base->ca_int_status_alias = CA_GART_FETCH_ERR;
- ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR;
- ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR;
+ writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias);
+ writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias);
+ __sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR);
/*
* Program the aperature and gart registers in TIOCA
*/
- ca_base->ca_gart_aperature = ap_reg;
- ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1;
+ writeq(ap_reg, &ca_base->ca_gart_aperature);
+ writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table);
return 0;
}
@@ -211,7 +214,6 @@
tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
{
int cap_ptr;
- uint64_t ca_control1;
uint32_t reg;
struct tioca *tioca_base;
struct pci_dev *pdev;
@@ -256,9 +258,7 @@
*/
tioca_base = (struct tioca *)common->ca_common.bs_base;
- ca_control1 = tioca_base->ca_control1;
- ca_control1 |= CA_AGP_FW_ENABLE;
- tioca_base->ca_control1 = ca_control1;
+ __sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE);
}
EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */
@@ -345,7 +345,7 @@
return 0;
}
- agp_dma_extn = ca_base->ca_agp_dma_addr_extn;
+ agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn);
if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
printk(KERN_ERR "%s: coretalk upper node (%u) "
"mismatch with ca_agp_dma_addr_extn (%lu)\n",
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 8e75db2..9f03d4e 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioce_provider.h>
@@ -227,7 +228,7 @@
ate = ATE_MAKE(addr, pagesize);
ate_shadow[i + j] = ate;
- ate_reg[i + j] = ate;
+ writeq(ate, &ate_reg[i + j]);
addr += pagesize;
}
@@ -268,10 +269,10 @@
pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
- volatile uint64_t tmp;
+ uint64_t tmp;
ce_kern->ce_port[port].dirmap_shadow = ct_upper;
- ce_mmr->ce_ure_dir_map[port] = ct_upper;
+ writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
tmp = ce_mmr->ce_ure_dir_map[port];
dma_ok = 1;
} else
@@ -343,7 +344,7 @@
if (TIOCE_D32_ADDR(bus_addr)) {
if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
ce_kern->ce_port[port].dirmap_shadow = 0;
- ce_mmr->ce_ure_dir_map[port] = 0;
+ writeq(0, &ce_mmr->ce_ure_dir_map[port]);
}
} else {
struct tioce_dmamap *map;
@@ -582,18 +583,18 @@
*/
tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
- tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK;
- tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE;
+ __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
+ __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
tioce_kern->ce_ate3240_pagesize = KB(256);
for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
tioce_kern->ce_ate40_shadow[i] = 0;
- tioce_mmr->ce_ure_ate40[i] = 0;
+ writeq(0, &tioce_mmr->ce_ure_ate40[i]);
}
for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
tioce_kern->ce_ate3240_shadow[i] = 0;
- tioce_mmr->ce_ure_ate3240[i] = 0;
+ writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
}
return tioce_kern;
@@ -665,7 +666,7 @@
default:
return;
}
- ce_mmr->ce_adm_force_int = force_int_val;
+ writeq(force_int_val, &ce_mmr->ce_adm_force_int);
}
/**
@@ -686,6 +687,7 @@
struct tioce_common *ce_common;
struct tioce *ce_mmr;
int bit;
+ uint64_t vector;
pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
if (!pcidev_info)
@@ -696,11 +698,11 @@
bit = sn_irq_info->irq_int_bit;
- ce_mmr->ce_adm_int_mask |= (1UL << bit);
- ce_mmr->ce_adm_int_dest[bit] =
- ((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) |
- sn_irq_info->irq_xtalkaddr;
- ce_mmr->ce_adm_int_mask &= ~(1UL << bit);
+ __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+ vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+ vector |= sn_irq_info->irq_xtalkaddr;
+ writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
+ __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
tioce_force_interrupt(sn_irq_info);
}
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 85920fb..396c942 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -653,8 +653,6 @@
SAVE_ALL
mvfc r0, bpc
ld r1, @r0
- seth r0, #0xa0f0
- st r1, @r0
ldi r1, #0x20 ; error_code
mv r0, sp ; pt_regs
bl do_rie_handler
diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/kernel/io_m32700ut.c
index e545b06..eda9f96 100644
--- a/arch/m32r/kernel/io_m32700ut.c
+++ b/arch/m32r/kernel/io_m32700ut.c
@@ -64,11 +64,11 @@
* from 0x10000000 to 0x13ffffff on physical address.
* The base address of LAN controller(LAN91C111) is 0x300.
*/
-#define LAN_IOSTART 0x300
-#define LAN_IOEND 0x320
+#define LAN_IOSTART 0xa0000300
+#define LAN_IOEND 0xa0000320
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+ return (void *)(port + 0x10000000);
}
static inline void *_port2addr_usb(unsigned long port)
{
diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/kernel/io_mappi.c
index 7803316..3c3da04 100644
--- a/arch/m32r/kernel/io_mappi.c
+++ b/arch/m32r/kernel/io_mappi.c
@@ -31,7 +31,7 @@
static inline void *_port2addr(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET);
+ return (void *)(port | (NONCACHE_OFFSET));
}
static inline void *_port2addr_ne(unsigned long port)
diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/kernel/io_mappi2.c
index 5c03504..df3c729 100644
--- a/arch/m32r/kernel/io_mappi2.c
+++ b/arch/m32r/kernel/io_mappi2.c
@@ -33,12 +33,9 @@
static inline void *_port2addr(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET);
+ return (void *)(port | (NONCACHE_OFFSET));
}
-#define LAN_IOSTART 0x300
-#define LAN_IOEND 0x320
-
#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
static inline void *__port2addr_ata(unsigned long port)
{
@@ -59,15 +56,17 @@
}
#endif
+#define LAN_IOSTART 0xa0000300
+#define LAN_IOEND 0xa0000320
#ifdef CONFIG_CHIP_OPSP
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+ return (void *)(port + 0x10000000);
}
#else
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x04000000);
+ return (void *)(port + 0x04000000);
}
#endif
static inline void *_port2addr_usb(unsigned long port)
diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c
index c80bde6..6716ffe 100644
--- a/arch/m32r/kernel/io_mappi3.c
+++ b/arch/m32r/kernel/io_mappi3.c
@@ -36,9 +36,6 @@
return (void *)(port + NONCACHE_OFFSET);
}
-#define LAN_IOSTART 0x300
-#define LAN_IOEND 0x320
-
#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
static inline void *__port2addr_ata(unsigned long port)
{
@@ -59,9 +56,11 @@
}
#endif
+#define LAN_IOSTART 0xa0000300
+#define LAN_IOEND 0xa0000320
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+ return (void *)(port + 0x10000000);
}
static inline void *_port2addr_usb(unsigned long port)
diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/kernel/io_oaks32r.c
index 9997ddd..8be3239 100644
--- a/arch/m32r/kernel/io_oaks32r.c
+++ b/arch/m32r/kernel/io_oaks32r.c
@@ -16,7 +16,7 @@
static inline void *_port2addr(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET);
+ return (void *)(port | (NONCACHE_OFFSET));
}
static inline void *_port2addr_ne(unsigned long port)
diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/kernel/io_opsput.c
index e34951e..4793bd1 100644
--- a/arch/m32r/kernel/io_opsput.c
+++ b/arch/m32r/kernel/io_opsput.c
@@ -36,7 +36,7 @@
static inline void *_port2addr(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET);
+ return (void *)(port | (NONCACHE_OFFSET));
}
/*
@@ -44,11 +44,11 @@
* from 0x10000000 to 0x13ffffff on physical address.
* The base address of LAN controller(LAN91C111) is 0x300.
*/
-#define LAN_IOSTART 0x300
-#define LAN_IOEND 0x320
+#define LAN_IOSTART 0xa0000300
+#define LAN_IOEND 0xa0000320
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+ return (void *)(port + 0x10000000);
}
static inline void *_port2addr_usb(unsigned long port)
{
diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/kernel/io_usrv.c
index 9eb161d..39a379a 100644
--- a/arch/m32r/kernel/io_usrv.c
+++ b/arch/m32r/kernel/io_usrv.c
@@ -47,7 +47,7 @@
else if (port >= UART1_IOSTART && port <= UART1_IOEND)
port = ((port - UART1_IOSTART) << 1) + UART1_REGSTART;
#endif /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */
- return (void *)(port + NONCACHE_OFFSET);
+ return (void *)(port | (NONCACHE_OFFSET));
}
static inline void delay(void)
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 124f7c1..078d2a0 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -756,7 +756,7 @@
return ret;
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret;
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
index ec56747..f722ec8 100644
--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -305,19 +305,19 @@
seq_printf(m, "processor\t: %ld\n", cpu);
-#ifdef CONFIG_CHIP_VDEC2
+#if defined(CONFIG_CHIP_VDEC2)
seq_printf(m, "cpu family\t: VDEC2\n"
"cache size\t: Unknown\n");
-#elif CONFIG_CHIP_M32700
+#elif defined(CONFIG_CHIP_M32700)
seq_printf(m,"cpu family\t: M32700\n"
"cache size\t: I-8KB/D-8KB\n");
-#elif CONFIG_CHIP_M32102
+#elif defined(CONFIG_CHIP_M32102)
seq_printf(m,"cpu family\t: M32102\n"
"cache size\t: I-8KB\n");
-#elif CONFIG_CHIP_OPSP
+#elif defined(CONFIG_CHIP_OPSP)
seq_printf(m,"cpu family\t: OPSP\n"
"cache size\t: I-8KB/D-8KB\n");
-#elif CONFIG_CHIP_MP
+#elif defined(CONFIG_CHIP_MP)
seq_printf(m, "cpu family\t: M32R-MP\n"
"cache size\t: I-xxKB/D-xxKB\n");
#else
@@ -326,19 +326,19 @@
seq_printf(m, "bogomips\t: %lu.%02lu\n",
c->loops_per_jiffy/(500000/HZ),
(c->loops_per_jiffy/(5000/HZ)) % 100);
-#ifdef CONFIG_PLAT_MAPPI
+#if defined(CONFIG_PLAT_MAPPI)
seq_printf(m, "Machine\t\t: Mappi Evaluation board\n");
-#elif CONFIG_PLAT_MAPPI2
+#elif defined(CONFIG_PLAT_MAPPI2)
seq_printf(m, "Machine\t\t: Mappi-II Evaluation board\n");
-#elif CONFIG_PLAT_MAPPI3
+#elif defined(CONFIG_PLAT_MAPPI3)
seq_printf(m, "Machine\t\t: Mappi-III Evaluation board\n");
-#elif CONFIG_PLAT_M32700UT
+#elif defined(CONFIG_PLAT_M32700UT)
seq_printf(m, "Machine\t\t: M32700UT Evaluation board\n");
-#elif CONFIG_PLAT_OPSPUT
+#elif defined(CONFIG_PLAT_OPSPUT)
seq_printf(m, "Machine\t\t: OPSPUT Evaluation board\n");
-#elif CONFIG_PLAT_USRV
+#elif defined(CONFIG_PLAT_USRV)
seq_printf(m, "Machine\t\t: uServer\n");
-#elif CONFIG_PLAT_OAKS32R
+#elif defined(CONFIG_PLAT_OAKS32R)
seq_printf(m, "Machine\t\t: OAKS32R\n");
#else
seq_printf(m, "Machine\t\t: Unknown\n");
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 539c562..2ebce20 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -39,10 +39,6 @@
extern void smp_local_timer_interrupt(struct pt_regs *);
#endif
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
extern unsigned long wall_jiffies;
#define TICK_SIZE (tick_nsec / 1000)
diff --git a/arch/m32r/lib/csum_partial_copy.c b/arch/m32r/lib/csum_partial_copy.c
index ddb16a8..3d5f061 100644
--- a/arch/m32r/lib/csum_partial_copy.c
+++ b/arch/m32r/lib/csum_partial_copy.c
@@ -18,10 +18,10 @@
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/string.h>
#include <net/checksum.h>
#include <asm/byteorder.h>
-#include <asm/string.h>
#include <asm/uaccess.h>
/*
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index d9a40b1..6facf15 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -48,6 +48,8 @@
show_free_areas();
printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
for_each_pgdat(pgdat) {
+ unsigned long flags;
+ pgdat_resize_lock(pgdat, &flags);
for (i = 0; i < pgdat->node_spanned_pages; ++i) {
page = pgdat_page_nr(pgdat, i);
total++;
@@ -60,6 +62,7 @@
else if (page_count(page))
shared += page_count(page) - 1;
}
+ pgdat_resize_unlock(pgdat, &flags);
}
printk("%d pages of RAM\n", total);
printk("%d pages of HIGHMEM\n",highmem);
@@ -150,10 +153,14 @@
int reservedpages, nid, i;
reservedpages = 0;
- for_each_online_node(nid)
+ for_each_online_node(nid) {
+ unsigned long flags;
+ pgdat_resize_lock(NODE_DATA(nid), &flags);
for (i = 0 ; i < MAX_LOW_PFN(nid) - START_PFN(nid) ; i++)
if (PageReserved(nid_page_nr(nid, i)))
reservedpages++;
+ pgdat_resize_unlock(NODE_DATA(nid), &flags);
+ }
return reservedpages;
}
diff --git a/arch/m32r/mm/ioremap.c b/arch/m32r/mm/ioremap.c
index 70c5905..a151849 100644
--- a/arch/m32r/mm/ioremap.c
+++ b/arch/m32r/mm/ioremap.c
@@ -67,7 +67,7 @@
if (address >= end)
BUG();
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -90,7 +90,6 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
pmd_t *pmd;
pmd = pmd_alloc(&init_mm, dir, address);
@@ -104,7 +103,6 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return error;
}
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index ba960bb..1dd5d18 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -388,33 +388,11 @@
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
600. If you intend to use pcmcia cards say Y; otherwise say N.
-config STRAM_SWAP
- bool "Support for ST-RAM as swap space"
- depends on ATARI && BROKEN
- ---help---
- Some Atari 68k machines (including the 520STF and 1020STE) divide
- their addressable memory into ST and TT sections. The TT section
- (up to 512MB) is the main memory; the ST section (up to 4MB) is
- accessible to the built-in graphics board, runs slower, and is
- present mainly for backward compatibility with older machines.
-
- This enables support for using (parts of) ST-RAM as swap space,
- instead of as normal system memory. This can first enhance system
- performance if you have lots of alternate RAM (compared to the size
- of ST-RAM), because executable code always will reside in faster
- memory. ST-RAM will remain as ultra-fast swap space. On the other
- hand, it allows much improved dynamic allocations of ST-RAM buffers
- for device driver modules (e.g. floppy, ACSI, SLM printer, DMA
- sound). The probability that such allocations at module load time
- fail is drastically reduced.
-
config STRAM_PROC
bool "ST-RAM statistics in /proc"
depends on ATARI
help
- Say Y here to report ST-RAM usage statistics in /proc/stram. See
- the help for CONFIG_STRAM_SWAP for discussion of ST-RAM and its
- uses.
+ Say Y here to report ST-RAM usage statistics in /proc/stram.
config HEARTBEAT
bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c
index 5a3c106..22e0481 100644
--- a/arch/m68k/atari/stram.c
+++ b/arch/m68k/atari/stram.c
@@ -15,11 +15,9 @@
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/init.h>
-#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
-#include <linux/shm.h>
#include <linux/bootmem.h>
#include <linux/mount.h>
#include <linux/blkdev.h>
@@ -33,8 +31,6 @@
#include <asm/io.h>
#include <asm/semaphore.h>
-#include <linux/swapops.h>
-
#undef DEBUG
#ifdef DEBUG
@@ -49,8 +45,7 @@
#include <linux/proc_fs.h>
#endif
-/* Pre-swapping comments:
- *
+/*
* ++roman:
*
* New version of ST-Ram buffer allocation. Instead of using the
@@ -75,76 +70,6 @@
*
*/
-/*
- * New Nov 1997: Use ST-RAM as swap space!
- *
- * In the past, there were often problems with modules that require ST-RAM
- * buffers. Such drivers have to use __get_dma_pages(), which unfortunately
- * often isn't very successful in allocating more than 1 page :-( [1] The net
- * result was that most of the time you couldn't insmod such modules (ataflop,
- * ACSI, SCSI on Falcon, Atari internal framebuffer, not to speak of acsi_slm,
- * which needs a 1 MB buffer... :-).
- *
- * To overcome this limitation, ST-RAM can now be turned into a very
- * high-speed swap space. If a request for an ST-RAM buffer comes, the kernel
- * now tries to unswap some pages on that swap device to make some free (and
- * contiguous) space. This works much better in comparison to
- * __get_dma_pages(), since used swap pages can be selectively freed by either
- * moving them to somewhere else in swap space, or by reading them back into
- * system memory. Ok, there operation of unswapping isn't really cheap (for
- * each page, one has to go through the page tables of all processes), but it
- * doesn't happen that often (only when allocation ST-RAM, i.e. when loading a
- * module that needs ST-RAM). But it at least makes it possible to load such
- * modules!
- *
- * It could also be that overall system performance increases a bit due to
- * ST-RAM swapping, since slow ST-RAM isn't used anymore for holding data or
- * executing code in. It's then just a (very fast, compared to disk) back
- * storage for not-so-often needed data. (But this effect must be compared
- * with the loss of total memory...) Don't know if the effect is already
- * visible on a TT, where the speed difference between ST- and TT-RAM isn't
- * that dramatic, but it should on machines where TT-RAM is really much faster
- * (e.g. Afterburner).
- *
- * [1]: __get_free_pages() does a fine job if you only want one page, but if
- * you want more (contiguous) pages, it can give you such a block only if
- * there's already a free one. The algorithm can't try to free buffers or swap
- * out something in order to make more free space, since all that page-freeing
- * mechanisms work "target-less", i.e. they just free something, but not in a
- * specific place. I.e., __get_free_pages() can't do anything to free
- * *adjacent* pages :-( This situation becomes even worse for DMA memory,
- * since the freeing algorithms are also blind to DMA capability of pages.
- */
-
-/* 1998-10-20: ++andreas
- unswap_by_move disabled because it does not handle swapped shm pages.
-*/
-
-/* 2000-05-01: ++andreas
- Integrated with bootmem. Remove all traces of unswap_by_move.
-*/
-
-#ifdef CONFIG_STRAM_SWAP
-#define ALIGN_IF_SWAP(x) PAGE_ALIGN(x)
-#else
-#define ALIGN_IF_SWAP(x) (x)
-#endif
-
-/* get index of swap page at address 'addr' */
-#define SWAP_NR(addr) (((addr) - swap_start) >> PAGE_SHIFT)
-
-/* get address of swap page #'nr' */
-#define SWAP_ADDR(nr) (swap_start + ((nr) << PAGE_SHIFT))
-
-/* get number of pages for 'n' bytes (already page-aligned) */
-#define N_PAGES(n) ((n) >> PAGE_SHIFT)
-
-/* The following two numbers define the maximum fraction of ST-RAM in total
- * memory, below that the kernel would automatically use ST-RAM as swap
- * space. This decision can be overridden with stram_swap= */
-#define MAX_STRAM_FRACTION_NOM 1
-#define MAX_STRAM_FRACTION_DENOM 3
-
/* Start and end (virtual) of ST-RAM */
static void *stram_start, *stram_end;
@@ -164,10 +89,9 @@
} BLOCK;
/* values for flags field */
-#define BLOCK_FREE 0x01 /* free structure in the BLOCKs pool */
+#define BLOCK_FREE 0x01 /* free structure in the BLOCKs pool */
#define BLOCK_KMALLOCED 0x02 /* structure allocated by kmalloc() */
-#define BLOCK_GFP 0x08 /* block allocated with __get_dma_pages() */
-#define BLOCK_INSWAP 0x10 /* block allocated in swap space */
+#define BLOCK_GFP 0x08 /* block allocated with __get_dma_pages() */
/* list of allocated blocks */
static BLOCK *alloc_list;
@@ -179,60 +103,8 @@
#define N_STATIC_BLOCKS 20
static BLOCK static_blocks[N_STATIC_BLOCKS];
-#ifdef CONFIG_STRAM_SWAP
-/* max. number of bytes to use for swapping
- * 0 = no ST-RAM swapping
- * -1 = do swapping (to whole ST-RAM) if it's less than MAX_STRAM_FRACTION of
- * total memory
- */
-static int max_swap_size = -1;
-
-/* start and end of swapping area */
-static void *swap_start, *swap_end;
-
-/* The ST-RAM's swap info structure */
-static struct swap_info_struct *stram_swap_info;
-
-/* The ST-RAM's swap type */
-static int stram_swap_type;
-
-/* Semaphore for get_stram_region. */
-static DECLARE_MUTEX(stram_swap_sem);
-
-/* major and minor device number of the ST-RAM device; for the major, we use
- * the same as Amiga z2ram, which is really similar and impossible on Atari,
- * and for the minor a relatively odd number to avoid the user creating and
- * using that device. */
-#define STRAM_MAJOR Z2RAM_MAJOR
-#define STRAM_MINOR 13
-
-/* Some impossible pointer value */
-#define MAGIC_FILE_P (struct file *)0xffffdead
-
-#ifdef DO_PROC
-static unsigned stat_swap_read;
-static unsigned stat_swap_write;
-static unsigned stat_swap_force;
-#endif /* DO_PROC */
-
-#endif /* CONFIG_STRAM_SWAP */
-
/***************************** Prototypes *****************************/
-#ifdef CONFIG_STRAM_SWAP
-static int swap_init(void *start_mem, void *swap_data);
-static void *get_stram_region( unsigned long n_pages );
-static void free_stram_region( unsigned long offset, unsigned long n_pages
- );
-static int in_some_region(void *addr);
-static unsigned long find_free_region( unsigned long n_pages, unsigned long
- *total_free, unsigned long
- *region_free );
-static void do_stram_request(request_queue_t *);
-static int stram_open( struct inode *inode, struct file *filp );
-static int stram_release( struct inode *inode, struct file *filp );
-static void reserve_region(void *start, void *end);
-#endif
static BLOCK *add_region( void *addr, unsigned long size );
static BLOCK *find_region( void *addr );
static int remove_region( BLOCK *block );
@@ -279,84 +151,11 @@
*/
void __init atari_stram_reserve_pages(void *start_mem)
{
-#ifdef CONFIG_STRAM_SWAP
- /* if max_swap_size is negative (i.e. no stram_swap= option given),
- * determine at run time whether to use ST-RAM swapping */
- if (max_swap_size < 0)
- /* Use swapping if ST-RAM doesn't make up more than MAX_STRAM_FRACTION
- * of total memory. In that case, the max. size is set to 16 MB,
- * because ST-RAM can never be bigger than that.
- * Also, never use swapping on a Hades, there's no separate ST-RAM in
- * that machine. */
- max_swap_size =
- (!MACH_IS_HADES &&
- (N_PAGES(stram_end-stram_start)*MAX_STRAM_FRACTION_DENOM <=
- ((unsigned long)high_memory>>PAGE_SHIFT)*MAX_STRAM_FRACTION_NOM)) ? 16*1024*1024 : 0;
- DPRINTK( "atari_stram_reserve_pages: max_swap_size = %d\n", max_swap_size );
-#endif
-
/* always reserve first page of ST-RAM, the first 2 kB are
* supervisor-only! */
if (!kernel_in_stram)
reserve_bootmem (0, PAGE_SIZE);
-#ifdef CONFIG_STRAM_SWAP
- {
- void *swap_data;
-
- start_mem = (void *) PAGE_ALIGN ((unsigned long) start_mem);
- /* determine first page to use as swap: if the kernel is
- in TT-RAM, this is the first page of (usable) ST-RAM;
- otherwise just use the end of kernel data (= start_mem) */
- swap_start = !kernel_in_stram ? stram_start + PAGE_SIZE : start_mem;
- /* decrement by one page, rest of kernel assumes that first swap page
- * is always reserved and maybe doesn't handle swp_entry == 0
- * correctly */
- swap_start -= PAGE_SIZE;
- swap_end = stram_end;
- if (swap_end-swap_start > max_swap_size)
- swap_end = swap_start + max_swap_size;
- DPRINTK( "atari_stram_reserve_pages: swapping enabled; "
- "swap=%p-%p\n", swap_start, swap_end);
-
- /* reserve some amount of memory for maintainance of
- * swapping itself: one page for each 2048 (PAGE_SIZE/2)
- * swap pages. (2 bytes for each page) */
- swap_data = start_mem;
- start_mem += ((SWAP_NR(swap_end) + PAGE_SIZE/2 - 1)
- >> (PAGE_SHIFT-1)) << PAGE_SHIFT;
- /* correct swap_start if necessary */
- if (swap_start + PAGE_SIZE == swap_data)
- swap_start = start_mem - PAGE_SIZE;
-
- if (!swap_init( start_mem, swap_data )) {
- printk( KERN_ERR "ST-RAM swap space initialization failed\n" );
- max_swap_size = 0;
- return;
- }
- /* reserve region for swapping meta-data */
- reserve_region(swap_data, start_mem);
- /* reserve swapping area itself */
- reserve_region(swap_start + PAGE_SIZE, swap_end);
-
- /*
- * If the whole ST-RAM is used for swapping, there are no allocatable
- * dma pages left. But unfortunately, some shared parts of the kernel
- * (particularly the SCSI mid-level) call __get_dma_pages()
- * unconditionally :-( These calls then fail, and scsi.c even doesn't
- * check for NULL return values and just crashes. The quick fix for
- * this (instead of doing much clean up work in the SCSI code) is to
- * pretend all pages are DMA-able by setting mach_max_dma_address to
- * ULONG_MAX. This doesn't change any functionality so far, since
- * get_dma_pages() shouldn't be used on Atari anyway anymore (better
- * use atari_stram_alloc()), and the Atari SCSI drivers don't need DMA
- * memory. But unfortunately there's now no kind of warning (even not
- * a NULL return value) if you use get_dma_pages() nevertheless :-(
- * You just will get non-DMA-able memory...
- */
- mach_max_dma_address = 0xffffffff;
- }
-#endif
}
void atari_stram_mem_init_hook (void)
@@ -367,7 +166,6 @@
/*
* This is main public interface: somehow allocate a ST-RAM block
- * There are three strategies:
*
* - If we're before mem_init(), we have to make a static allocation. The
* region is taken in the kernel data area (if the kernel is in ST-RAM) or
@@ -375,14 +173,9 @@
* rsvd_stram_* region. The ST-RAM is somewhere in the middle of kernel
* address space in the latter case.
*
- * - If mem_init() already has been called and ST-RAM swapping is enabled,
- * try to get the memory from the (pseudo) swap-space, either free already
- * or by moving some other pages out of the swap.
- *
- * - If mem_init() already has been called, and ST-RAM swapping is not
- * enabled, the only possibility is to try with __get_dma_pages(). This has
- * the disadvantage that it's very hard to get more than 1 page, and it is
- * likely to fail :-(
+ * - If mem_init() already has been called, try with __get_dma_pages().
+ * This has the disadvantage that it's very hard to get more than 1 page,
+ * and it is likely to fail :-(
*
*/
void *atari_stram_alloc(long size, const char *owner)
@@ -393,27 +186,13 @@
DPRINTK("atari_stram_alloc(size=%08lx,owner=%s)\n", size, owner);
- size = ALIGN_IF_SWAP(size);
- DPRINTK( "atari_stram_alloc: rounded size = %08lx\n", size );
-#ifdef CONFIG_STRAM_SWAP
- if (max_swap_size) {
- /* If swapping is active: make some free space in the swap
- "device". */
- DPRINTK( "atari_stram_alloc: after mem_init, swapping ok, "
- "calling get_region\n" );
- addr = get_stram_region( N_PAGES(size) );
- flags = BLOCK_INSWAP;
- }
- else
-#endif
if (!mem_init_done)
return alloc_bootmem_low(size);
else {
- /* After mem_init() and no swapping: can only resort to
- * __get_dma_pages() */
+ /* After mem_init(): can only resort to __get_dma_pages() */
addr = (void *)__get_dma_pages(GFP_KERNEL, get_order(size));
flags = BLOCK_GFP;
- DPRINTK( "atari_stram_alloc: after mem_init, swapping off, "
+ DPRINTK( "atari_stram_alloc: after mem_init, "
"get_pages=%p\n", addr );
}
@@ -422,12 +201,7 @@
/* out of memory for BLOCK structure :-( */
DPRINTK( "atari_stram_alloc: out of mem for BLOCK -- "
"freeing again\n" );
-#ifdef CONFIG_STRAM_SWAP
- if (flags == BLOCK_INSWAP)
- free_stram_region( SWAP_NR(addr), N_PAGES(size) );
- else
-#endif
- free_pages((unsigned long)addr, get_order(size));
+ free_pages((unsigned long)addr, get_order(size));
return( NULL );
}
block->owner = owner;
@@ -451,25 +225,12 @@
DPRINTK( "atari_stram_free: found block (%p): size=%08lx, owner=%s, "
"flags=%02x\n", block, block->size, block->owner, block->flags );
-#ifdef CONFIG_STRAM_SWAP
- if (!max_swap_size) {
-#endif
- if (block->flags & BLOCK_GFP) {
- DPRINTK("atari_stram_free: is kmalloced, order_size=%d\n",
- get_order(block->size));
- free_pages((unsigned long)addr, get_order(block->size));
- }
- else
- goto fail;
-#ifdef CONFIG_STRAM_SWAP
- }
- else if (block->flags & BLOCK_INSWAP) {
- DPRINTK( "atari_stram_free: is swap-alloced\n" );
- free_stram_region( SWAP_NR(block->start), N_PAGES(block->size) );
- }
- else
+ if (!(block->flags & BLOCK_GFP))
goto fail;
-#endif
+
+ DPRINTK("atari_stram_free: is kmalloced, order_size=%d\n",
+ get_order(block->size));
+ free_pages((unsigned long)addr, get_order(block->size));
remove_region( block );
return;
@@ -478,612 +239,6 @@
"(called from %p)\n", addr, __builtin_return_address(0) );
}
-
-#ifdef CONFIG_STRAM_SWAP
-
-
-/* ------------------------------------------------------------------------ */
-/* Main Swapping Functions */
-/* ------------------------------------------------------------------------ */
-
-
-/*
- * Initialize ST-RAM swap device
- * (lots copied and modified from sys_swapon() in mm/swapfile.c)
- */
-static int __init swap_init(void *start_mem, void *swap_data)
-{
- static struct dentry fake_dentry;
- static struct vfsmount fake_vfsmnt;
- struct swap_info_struct *p;
- struct inode swap_inode;
- unsigned int type;
- void *addr;
- int i, j, k, prev;
-
- DPRINTK("swap_init(start_mem=%p, swap_data=%p)\n",
- start_mem, swap_data);
-
- /* need at least one page for swapping to (and this also isn't very
- * much... :-) */
- if (swap_end - swap_start < 2*PAGE_SIZE) {
- printk( KERN_WARNING "stram_swap_init: swap space too small\n" );
- return( 0 );
- }
-
- /* find free slot in swap_info */
- for( p = swap_info, type = 0; type < nr_swapfiles; type++, p++ )
- if (!(p->flags & SWP_USED))
- break;
- if (type >= MAX_SWAPFILES) {
- printk( KERN_WARNING "stram_swap_init: max. number of "
- "swap devices exhausted\n" );
- return( 0 );
- }
- if (type >= nr_swapfiles)
- nr_swapfiles = type+1;
-
- stram_swap_info = p;
- stram_swap_type = type;
-
- /* fake some dir cache entries to give us some name in /dev/swaps */
- fake_dentry.d_parent = &fake_dentry;
- fake_dentry.d_name.name = "stram (internal)";
- fake_dentry.d_name.len = 16;
- fake_vfsmnt.mnt_parent = &fake_vfsmnt;
-
- p->flags = SWP_USED;
- p->swap_file = &fake_dentry;
- p->swap_vfsmnt = &fake_vfsmnt;
- p->swap_map = swap_data;
- p->cluster_nr = 0;
- p->next = -1;
- p->prio = 0x7ff0; /* a rather high priority, but not the higest
- * to give the user a chance to override */
-
- /* call stram_open() directly, avoids at least the overhead in
- * constructing a dummy file structure... */
- swap_inode.i_rdev = MKDEV( STRAM_MAJOR, STRAM_MINOR );
- stram_open( &swap_inode, MAGIC_FILE_P );
- p->max = SWAP_NR(swap_end);
-
- /* initialize swap_map: set regions that are already allocated or belong
- * to kernel data space to SWAP_MAP_BAD, otherwise to free */
- j = 0; /* # of free pages */
- k = 0; /* # of already allocated pages (from pre-mem_init stram_alloc()) */
- p->lowest_bit = 0;
- p->highest_bit = 0;
- for( i = 1, addr = SWAP_ADDR(1); i < p->max;
- i++, addr += PAGE_SIZE ) {
- if (in_some_region( addr )) {
- p->swap_map[i] = SWAP_MAP_BAD;
- ++k;
- }
- else if (kernel_in_stram && addr < start_mem ) {
- p->swap_map[i] = SWAP_MAP_BAD;
- }
- else {
- p->swap_map[i] = 0;
- ++j;
- if (!p->lowest_bit) p->lowest_bit = i;
- p->highest_bit = i;
- }
- }
- /* first page always reserved (and doesn't really belong to swap space) */
- p->swap_map[0] = SWAP_MAP_BAD;
-
- /* now swapping to this device ok */
- p->pages = j + k;
- swap_list_lock();
- nr_swap_pages += j;
- p->flags = SWP_WRITEOK;
-
- /* insert swap space into swap_list */
- prev = -1;
- for (i = swap_list.head; i >= 0; i = swap_info[i].next) {
- if (p->prio >= swap_info[i].prio) {
- break;
- }
- prev = i;
- }
- p->next = i;
- if (prev < 0) {
- swap_list.head = swap_list.next = p - swap_info;
- } else {
- swap_info[prev].next = p - swap_info;
- }
- swap_list_unlock();
-
- printk( KERN_INFO "Using %dk (%d pages) of ST-RAM as swap space.\n",
- p->pages << 2, p->pages );
- return( 1 );
-}
-
-
-/*
- * The swap entry has been read in advance, and we return 1 to indicate
- * that the page has been used or is no longer needed.
- *
- * Always set the resulting pte to be nowrite (the same as COW pages
- * after one process has exited). We don't know just how many PTEs will
- * share this swap entry, so be cautious and let do_wp_page work out
- * what to do if a write is requested later.
- */
-static inline void unswap_pte(struct vm_area_struct * vma, unsigned long
- address, pte_t *dir, swp_entry_t entry,
- struct page *page)
-{
- pte_t pte = *dir;
-
- if (pte_none(pte))
- return;
- if (pte_present(pte)) {
- /* If this entry is swap-cached, then page must already
- hold the right address for any copies in physical
- memory */
- if (pte_page(pte) != page)
- return;
- /* We will be removing the swap cache in a moment, so... */
- set_pte(dir, pte_mkdirty(pte));
- return;
- }
- if (pte_val(pte) != entry.val)
- return;
-
- DPRINTK("unswap_pte: replacing entry %08lx by new page %p",
- entry.val, page);
- set_pte(dir, pte_mkdirty(mk_pte(page, vma->vm_page_prot)));
- swap_free(entry);
- get_page(page);
- inc_mm_counter(vma->vm_mm, rss);
-}
-
-static inline void unswap_pmd(struct vm_area_struct * vma, pmd_t *dir,
- unsigned long address, unsigned long size,
- unsigned long offset, swp_entry_t entry,
- struct page *page)
-{
- pte_t * pte;
- unsigned long end;
-
- if (pmd_none(*dir))
- return;
- if (pmd_bad(*dir)) {
- pmd_ERROR(*dir);
- pmd_clear(dir);
- return;
- }
- pte = pte_offset_kernel(dir, address);
- offset += address & PMD_MASK;
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- do {
- unswap_pte(vma, offset+address-vma->vm_start, pte, entry, page);
- address += PAGE_SIZE;
- pte++;
- } while (address < end);
-}
-
-static inline void unswap_pgd(struct vm_area_struct * vma, pgd_t *dir,
- unsigned long address, unsigned long size,
- swp_entry_t entry, struct page *page)
-{
- pmd_t * pmd;
- unsigned long offset, end;
-
- if (pgd_none(*dir))
- return;
- if (pgd_bad(*dir)) {
- pgd_ERROR(*dir);
- pgd_clear(dir);
- return;
- }
- pmd = pmd_offset(dir, address);
- offset = address & PGDIR_MASK;
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- do {
- unswap_pmd(vma, pmd, address, end - address, offset, entry,
- page);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address < end);
-}
-
-static void unswap_vma(struct vm_area_struct * vma, pgd_t *pgdir,
- swp_entry_t entry, struct page *page)
-{
- unsigned long start = vma->vm_start, end = vma->vm_end;
-
- do {
- unswap_pgd(vma, pgdir, start, end - start, entry, page);
- start = (start + PGDIR_SIZE) & PGDIR_MASK;
- pgdir++;
- } while (start < end);
-}
-
-static void unswap_process(struct mm_struct * mm, swp_entry_t entry,
- struct page *page)
-{
- struct vm_area_struct* vma;
-
- /*
- * Go through process' page directory.
- */
- if (!mm)
- return;
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- pgd_t * pgd = pgd_offset(mm, vma->vm_start);
- unswap_vma(vma, pgd, entry, page);
- }
-}
-
-
-static int unswap_by_read(unsigned short *map, unsigned long max,
- unsigned long start, unsigned long n_pages)
-{
- struct task_struct *p;
- struct page *page;
- swp_entry_t entry;
- unsigned long i;
-
- DPRINTK( "unswapping %lu..%lu by reading in\n",
- start, start+n_pages-1 );
-
- for( i = start; i < start+n_pages; ++i ) {
- if (map[i] == SWAP_MAP_BAD) {
- printk( KERN_ERR "get_stram_region: page %lu already "
- "reserved??\n", i );
- continue;
- }
-
- if (map[i]) {
- entry = swp_entry(stram_swap_type, i);
- DPRINTK("unswap: map[i=%lu]=%u nr_swap=%ld\n",
- i, map[i], nr_swap_pages);
-
- swap_device_lock(stram_swap_info);
- map[i]++;
- swap_device_unlock(stram_swap_info);
- /* Get a page for the entry, using the existing
- swap cache page if there is one. Otherwise,
- get a clean page and read the swap into it. */
- page = read_swap_cache_async(entry, NULL, 0);
- if (!page) {
- swap_free(entry);
- return -ENOMEM;
- }
- read_lock(&tasklist_lock);
- for_each_process(p)
- unswap_process(p->mm, entry, page);
- read_unlock(&tasklist_lock);
- shmem_unuse(entry, page);
- /* Now get rid of the extra reference to the
- temporary page we've been using. */
- if (PageSwapCache(page))
- delete_from_swap_cache(page);
- __free_page(page);
- #ifdef DO_PROC
- stat_swap_force++;
- #endif
- }
-
- DPRINTK( "unswap: map[i=%lu]=%u nr_swap=%ld\n",
- i, map[i], nr_swap_pages );
- swap_list_lock();
- swap_device_lock(stram_swap_info);
- map[i] = SWAP_MAP_BAD;
- if (stram_swap_info->lowest_bit == i)
- stram_swap_info->lowest_bit++;
- if (stram_swap_info->highest_bit == i)
- stram_swap_info->highest_bit--;
- --nr_swap_pages;
- swap_device_unlock(stram_swap_info);
- swap_list_unlock();
- }
-
- return 0;
-}
-
-/*
- * reserve a region in ST-RAM swap space for an allocation
- */
-static void *get_stram_region( unsigned long n_pages )
-{
- unsigned short *map = stram_swap_info->swap_map;
- unsigned long max = stram_swap_info->max;
- unsigned long start, total_free, region_free;
- int err;
- void *ret = NULL;
-
- DPRINTK( "get_stram_region(n_pages=%lu)\n", n_pages );
-
- down(&stram_swap_sem);
-
- /* disallow writing to the swap device now */
- stram_swap_info->flags = SWP_USED;
-
- /* find a region of n_pages pages in the swap space including as much free
- * pages as possible (and excluding any already-reserved pages). */
- if (!(start = find_free_region( n_pages, &total_free, ®ion_free )))
- goto end;
- DPRINTK( "get_stram_region: region starts at %lu, has %lu free pages\n",
- start, region_free );
-
- err = unswap_by_read(map, max, start, n_pages);
- if (err)
- goto end;
-
- ret = SWAP_ADDR(start);
- end:
- /* allow using swap device again */
- stram_swap_info->flags = SWP_WRITEOK;
- up(&stram_swap_sem);
- DPRINTK( "get_stram_region: returning %p\n", ret );
- return( ret );
-}
-
-
-/*
- * free a reserved region in ST-RAM swap space
- */
-static void free_stram_region( unsigned long offset, unsigned long n_pages )
-{
- unsigned short *map = stram_swap_info->swap_map;
-
- DPRINTK( "free_stram_region(offset=%lu,n_pages=%lu)\n", offset, n_pages );
-
- if (offset < 1 || offset + n_pages > stram_swap_info->max) {
- printk( KERN_ERR "free_stram_region: Trying to free non-ST-RAM\n" );
- return;
- }
-
- swap_list_lock();
- swap_device_lock(stram_swap_info);
- /* un-reserve the freed pages */
- for( ; n_pages > 0; ++offset, --n_pages ) {
- if (map[offset] != SWAP_MAP_BAD)
- printk( KERN_ERR "free_stram_region: Swap page %lu was not "
- "reserved\n", offset );
- map[offset] = 0;
- }
-
- /* update swapping meta-data */
- if (offset < stram_swap_info->lowest_bit)
- stram_swap_info->lowest_bit = offset;
- if (offset+n_pages-1 > stram_swap_info->highest_bit)
- stram_swap_info->highest_bit = offset+n_pages-1;
- if (stram_swap_info->prio > swap_info[swap_list.next].prio)
- swap_list.next = swap_list.head;
- nr_swap_pages += n_pages;
- swap_device_unlock(stram_swap_info);
- swap_list_unlock();
-}
-
-
-/* ------------------------------------------------------------------------ */
-/* Utility Functions for Swapping */
-/* ------------------------------------------------------------------------ */
-
-
-/* is addr in some of the allocated regions? */
-static int in_some_region(void *addr)
-{
- BLOCK *p;
-
- for( p = alloc_list; p; p = p->next ) {
- if (p->start <= addr && addr < p->start + p->size)
- return( 1 );
- }
- return( 0 );
-}
-
-
-static unsigned long find_free_region(unsigned long n_pages,
- unsigned long *total_free,
- unsigned long *region_free)
-{
- unsigned short *map = stram_swap_info->swap_map;
- unsigned long max = stram_swap_info->max;
- unsigned long head, tail, max_start;
- long nfree, max_free;
-
- /* first scan the swap space for a suitable place for the allocation */
- head = 1;
- max_start = 0;
- max_free = -1;
- *total_free = 0;
-
- start_over:
- /* increment tail until final window size reached, and count free pages */
- nfree = 0;
- for( tail = head; tail-head < n_pages && tail < max; ++tail ) {
- if (map[tail] == SWAP_MAP_BAD) {
- head = tail+1;
- goto start_over;
- }
- if (!map[tail]) {
- ++nfree;
- ++*total_free;
- }
- }
- if (tail-head < n_pages)
- goto out;
- if (nfree > max_free) {
- max_start = head;
- max_free = nfree;
- if (max_free >= n_pages)
- /* don't need more free pages... :-) */
- goto out;
- }
-
- /* now shift the window and look for the area where as much pages as
- * possible are free */
- while( tail < max ) {
- nfree -= (map[head++] == 0);
- if (map[tail] == SWAP_MAP_BAD) {
- head = tail+1;
- goto start_over;
- }
- if (!map[tail]) {
- ++nfree;
- ++*total_free;
- }
- ++tail;
- if (nfree > max_free) {
- max_start = head;
- max_free = nfree;
- if (max_free >= n_pages)
- /* don't need more free pages... :-) */
- goto out;
- }
- }
-
- out:
- if (max_free < 0) {
- printk( KERN_NOTICE "get_stram_region: ST-RAM too full or fragmented "
- "-- can't allocate %lu pages\n", n_pages );
- return( 0 );
- }
-
- *region_free = max_free;
- return( max_start );
-}
-
-
-/* setup parameters from command line */
-void __init stram_swap_setup(char *str, int *ints)
-{
- if (ints[0] >= 1)
- max_swap_size = ((ints[1] < 0 ? 0 : ints[1]) * 1024) & PAGE_MASK;
-}
-
-
-/* ------------------------------------------------------------------------ */
-/* ST-RAM device */
-/* ------------------------------------------------------------------------ */
-
-static int refcnt;
-
-static void do_stram_request(request_queue_t *q)
-{
- struct request *req;
-
- while ((req = elv_next_request(q)) != NULL) {
- void *start = swap_start + (req->sector << 9);
- unsigned long len = req->current_nr_sectors << 9;
- if ((start + len) > swap_end) {
- printk( KERN_ERR "stram: bad access beyond end of device: "
- "block=%ld, count=%d\n",
- req->sector,
- req->current_nr_sectors );
- end_request(req, 0);
- continue;
- }
-
- if (req->cmd == READ) {
- memcpy(req->buffer, start, len);
-#ifdef DO_PROC
- stat_swap_read += N_PAGES(len);
-#endif
- }
- else {
- memcpy(start, req->buffer, len);
-#ifdef DO_PROC
- stat_swap_write += N_PAGES(len);
-#endif
- }
- end_request(req, 1);
- }
-}
-
-
-static int stram_open( struct inode *inode, struct file *filp )
-{
- if (filp != MAGIC_FILE_P) {
- printk( KERN_NOTICE "Only kernel can open ST-RAM device\n" );
- return( -EPERM );
- }
- if (refcnt)
- return( -EBUSY );
- ++refcnt;
- return( 0 );
-}
-
-static int stram_release( struct inode *inode, struct file *filp )
-{
- if (filp != MAGIC_FILE_P) {
- printk( KERN_NOTICE "Only kernel can close ST-RAM device\n" );
- return( -EPERM );
- }
- if (refcnt > 0)
- --refcnt;
- return( 0 );
-}
-
-
-static struct block_device_operations stram_fops = {
- .open = stram_open,
- .release = stram_release,
-};
-
-static struct gendisk *stram_disk;
-static struct request_queue *stram_queue;
-static DEFINE_SPINLOCK(stram_lock);
-
-int __init stram_device_init(void)
-{
- if (!MACH_IS_ATARI)
- /* no point in initializing this, I hope */
- return -ENXIO;
-
- if (!max_swap_size)
- /* swapping not enabled */
- return -ENXIO;
- stram_disk = alloc_disk(1);
- if (!stram_disk)
- return -ENOMEM;
-
- if (register_blkdev(STRAM_MAJOR, "stram")) {
- put_disk(stram_disk);
- return -ENXIO;
- }
-
- stram_queue = blk_init_queue(do_stram_request, &stram_lock);
- if (!stram_queue) {
- unregister_blkdev(STRAM_MAJOR, "stram");
- put_disk(stram_disk);
- return -ENOMEM;
- }
-
- stram_disk->major = STRAM_MAJOR;
- stram_disk->first_minor = STRAM_MINOR;
- stram_disk->fops = &stram_fops;
- stram_disk->queue = stram_queue;
- sprintf(stram_disk->disk_name, "stram");
- set_capacity(stram_disk, (swap_end - swap_start)/512);
- add_disk(stram_disk);
- return 0;
-}
-
-
-
-/* ------------------------------------------------------------------------ */
-/* Misc Utility Functions */
-/* ------------------------------------------------------------------------ */
-
-/* reserve a range of pages */
-static void reserve_region(void *start, void *end)
-{
- reserve_bootmem (virt_to_phys(start), end - start);
-}
-
-#endif /* CONFIG_STRAM_SWAP */
-
/* ------------------------------------------------------------------------ */
/* Region Management */
@@ -1173,50 +328,9 @@
{
int len = 0;
BLOCK *p;
-#ifdef CONFIG_STRAM_SWAP
- int i;
- unsigned short *map = stram_swap_info->swap_map;
- unsigned long max = stram_swap_info->max;
- unsigned free = 0, used = 0, rsvd = 0;
-#endif
-#ifdef CONFIG_STRAM_SWAP
- if (max_swap_size) {
- for( i = 1; i < max; ++i ) {
- if (!map[i])
- ++free;
- else if (map[i] == SWAP_MAP_BAD)
- ++rsvd;
- else
- ++used;
- }
- PRINT_PROC(
- "Total ST-RAM: %8u kB\n"
- "Total ST-RAM swap: %8lu kB\n"
- "Free swap: %8u kB\n"
- "Used swap: %8u kB\n"
- "Allocated swap: %8u kB\n"
- "Swap Reads: %8u\n"
- "Swap Writes: %8u\n"
- "Swap Forced Reads: %8u\n",
- (stram_end - stram_start) >> 10,
- (max-1) << (PAGE_SHIFT-10),
- free << (PAGE_SHIFT-10),
- used << (PAGE_SHIFT-10),
- rsvd << (PAGE_SHIFT-10),
- stat_swap_read,
- stat_swap_write,
- stat_swap_force );
- }
- else {
-#endif
- PRINT_PROC( "ST-RAM swapping disabled\n" );
- PRINT_PROC("Total ST-RAM: %8u kB\n",
+ PRINT_PROC("Total ST-RAM: %8u kB\n",
(stram_end - stram_start) >> 10);
-#ifdef CONFIG_STRAM_SWAP
- }
-#endif
-
PRINT_PROC( "Allocated regions:\n" );
for( p = alloc_list; p; p = p->next ) {
if (len + 50 >= PAGE_SIZE)
@@ -1227,8 +341,6 @@
p->owner);
if (p->flags & BLOCK_GFP)
PRINT_PROC( "page-alloced)\n" );
- else if (p->flags & BLOCK_INSWAP)
- PRINT_PROC( "in swap)\n" );
else
PRINT_PROC( "??)\n" );
}
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 8ed1b01..f7f1d2e 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -121,7 +121,7 @@
child->thread.work.syscall_trace = 0;
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
unsigned long tmp;
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 4ec95e3..98e4b1a 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -27,10 +27,6 @@
#include <linux/timex.h>
#include <linux/profile.h>
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
static inline int set_rtc_mmss(unsigned long nowtime)
{
if (mach_set_clock_mmss)
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 5dcb3fa..fe2383e 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -201,7 +201,7 @@
virtaddr += PTRTREESIZE;
size -= PTRTREESIZE;
} else {
- pte_dir = pte_alloc_kernel(&init_mm, pmd_dir, virtaddr);
+ pte_dir = pte_alloc_kernel(pmd_dir, virtaddr);
if (!pte_dir) {
printk("ioremap: no mem for pte_dir\n");
return NULL;
diff --git a/arch/m68k/sun3x/dvma.c b/arch/m68k/sun3x/dvma.c
index 32e55ad..117481e 100644
--- a/arch/m68k/sun3x/dvma.c
+++ b/arch/m68k/sun3x/dvma.c
@@ -116,7 +116,7 @@
pte_t *pte;
unsigned long end3;
- if((pte = pte_alloc_kernel(&init_mm, pmd, vaddr)) == NULL) {
+ if((pte = pte_alloc_kernel(pmd, vaddr)) == NULL) {
ret = -ENOMEM;
goto out;
}
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index 9724e1c..621d7b9 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -101,7 +101,7 @@
put_reg(child, PT_SR, tmp);
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret;
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index b17c1ec..b9d8abb 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -27,10 +27,6 @@
#define TICK_SIZE (tick_nsec / 1000)
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
extern unsigned long wall_jiffies;
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4cd724c..0097a0d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -4,15 +4,1318 @@
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
-# shouldn't it be per-subarchitecture?
-config ARCH_MAY_HAVE_PC_FDC
- bool
- default y
-
mainmenu "Linux/MIPS Kernel Configuration"
source "init/Kconfig"
+menu "Machine selection"
+
+choice
+ prompt "System type"
+ default SGI_IP22
+
+config MIPS_MTX1
+ bool "Support for 4G Systems MTX-1 board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SOC_AU1500
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_BOSPORUS
+ bool "AMD Alchemy Bosporus board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1000
+ bool "AMD Alchemy PB1000 board"
+ select SOC_AU1000
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1100
+ bool "AMD Alchemy PB1100 board"
+ select SOC_AU1100
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1500
+ bool "AMD Alchemy PB1500 board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1550
+ bool "AMD Alchemy PB1550 board"
+ select SOC_AU1550
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1200
+ bool "AMD Alchemy PB1200 board"
+ select SOC_AU1200
+ select DMA_NONCOHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1000
+ bool "AMD Alchemy DB1000 board"
+ select SOC_AU1000
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1100
+ bool "AMD Alchemy DB1100 board"
+ select SOC_AU1100
+ select DMA_NONCOHERENT
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1500
+ bool "AMD Alchemy DB1500 board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1550
+ bool "AMD Alchemy DB1550 board"
+ select SOC_AU1550
+ select HW_HAS_PCI
+ select DMA_NONCOHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1200
+ bool "AMD Alchemy DB1200 board"
+ select SOC_AU1200
+ select DMA_COHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_MIRAGE
+ bool "AMD Alchemy Mirage board"
+ select DMA_NONCOHERENT
+ select SOC_AU1500
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_COBALT
+ bool "Support for Cobalt Server"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select I8259
+ select IRQ_CPU
+ select MIPS_GT64111
+ select SYS_HAS_CPU_NEVADA
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MACH_DECSTATION
+ bool "Support for DECstations"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select EARLY_PRINTK
+ select IRQ_CPU
+ select SYS_HAS_CPU_R3000
+ select SYS_HAS_CPU_R4X00
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for DEC's MIPS based workstations. For details
+ see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
+ DECstation porting pages on <http://decstation.unix-ag.org/>.
+
+ If you have one of the following DECstation Models you definitely
+ want to choose R4xx0 for the CPU Type:
+
+ DECstation 5000/50
+ DECstation 5000/150
+ DECstation 5000/260
+ DECsystem 5900/260
+
+ otherwise choose R3000.
+
+config MIPS_EV64120
+ bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_GT64120
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ This is an evaluation board based on the Galileo GT-64120
+ single-chip system controller that contains a MIPS R5000 compatible
+ core running at 75/100MHz. Their website is located at
+ <http://www.marvell.com/>. Say Y here if you wish to build a
+ kernel for this platform.
+
+config MIPS_EV96100
+ bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select MIPS_GT96100
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_R5000
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ This is an evaluation board based on the Galileo GT-96100 LAN/WAN
+ communications controllers containing a MIPS R5000 compatible core
+ running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
+ here if you wish to build a kernel for this platform.
+
+config MIPS_IVR
+ bool "Support for Globespan IVR board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select ITE_BOARD_GEN
+ select SYS_HAS_CPU_NEVADA
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This is an evaluation board built by Globespan to showcase thir
+ iVR (Internet Video Recorder) design. It utilizes a QED RM5231
+ R5000 MIPS core. More information can be found out their website
+ located at <http://www.globespan.net/>. Say Y here if you wish to
+ build a kernel for this platform.
+
+config MIPS_ITE8172
+ bool "Support for ITE 8172G board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select ITE_BOARD_GEN
+ select SYS_HAS_CPU_R5432
+ select SYS_HAS_CPU_NEVADA
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
+ with ATX form factor that utilizes a MIPS R5000 to work with its
+ ITE8172G companion internet appliance chip. The MIPS core can be
+ either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
+ a kernel for this platform.
+
+config MACH_JAZZ
+ bool "Support for the Jazz family of machines"
+ select ARC
+ select ARC32
+ select ARCH_MAY_HAVE_PC_FDC
+ select GENERIC_ISA_DMA
+ select I8259
+ select ISA
+ select SYS_HAS_CPU_R4X00
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ help
+ This a family of machines based on the MIPS R4030 chipset which was
+ used by several vendors to build RISC/os and Windows NT workstations.
+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+ Olivetti M700-10 workstations.
+
+config LASAT
+ bool "Support for LASAT Networks platforms"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_GT64120
+ select MIPS_NILE4
+ select R5000_CPU_SCACHE
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_ATLAS
+ bool "Support for MIPS Atlas board"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select HW_HAS_PCI
+ select MIPS_BOARDS_GEN
+ select MIPS_BONITO64
+ select MIPS_GT64120
+ select MIPS_MSC
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the MIPS Technologies Atlas evaluation
+ board.
+
+config MIPS_MALTA
+ bool "Support for MIPS Malta board"
+ select ARCH_MAY_HAVE_PC_FDC
+ select BOOT_ELF32
+ select HAVE_STD_PC_SERIAL_PORT
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select GENERIC_ISA_DMA
+ select HW_HAS_PCI
+ select I8259
+ select MIPS_BOARDS_GEN
+ select MIPS_BONITO64
+ select MIPS_GT64120
+ select MIPS_MSC
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the MIPS Technologies Malta evaluation
+ board.
+
+config MIPS_SEAD
+ bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select IRQ_CPU
+ select DMA_NONCOHERENT
+ select MIPS_BOARDS_GEN
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the MIPS Technologies SEAD evaluation
+ board.
+
+config MIPS_SIM
+ bool 'Support for MIPS simulator (MIPSsim)'
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This option enables support for MIPS Technologies MIPSsim software
+ emulator.
+
+config MOMENCO_JAGUAR_ATX
+ bool "Support for Momentum Jaguar board"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_MV64340
+ select LIMITED_DMA
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT
+ bool "Support for Momentum Ocelot board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select MIPS_GT64120
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT_3
+ bool "Support for Momentum Ocelot-3 board"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_MV64340
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Ocelot-3 is based off Discovery III System Controller and
+ PMC-Sierra Rm79000 core.
+
+config MOMENCO_OCELOT_C
+ bool "Support for Momentum Ocelot-C board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_MV64340
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+
+config MOMENCO_OCELOT_G
+ bool "Support for Momentum Ocelot-G board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select PCI_MARVELL
+ select RM7000_CPU_SCACHE
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+ Momentum Computer <http://www.momenco.com/>.
+
+config MIPS_XXS1500
+ bool "Support for MyCable XXS1500 board"
+ select DMA_NONCOHERENT
+ select SOC_AU1500
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_V2PCI
+ bool "Support for Philips PNX8550 based Viper2-PCI board"
+ select PNX8550
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_JBS
+ bool "Support for Philips PNX8550 based JBS board"
+ select PNX8550
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config DDB5074
+ bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DDB5XXX_COMMON
+ select DMA_NONCOHERENT
+ select HAVE_STD_PC_SERIAL_PORT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select I8259
+ select ISA
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the VR5000-based NEC DDB Vrc-5074
+ evaluation board.
+
+config DDB5476
+ bool "Support for NEC DDB Vrc-5476"
+ select DDB5XXX_COMMON
+ select DMA_NONCOHERENT
+ select HAVE_STD_PC_SERIAL_PORT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select I8259
+ select ISA
+ select SYS_HAS_CPU_R5432
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the R5432-based NEC DDB Vrc-5476
+ evaluation board.
+
+ Features : kernel debugging, serial terminal, NFS root fs, on-board
+ ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
+ IDE controller, PS2 keyboard, PS2 mouse, etc.
+
+config DDB5477
+ bool "Support for NEC DDB Vrc-5477"
+ select DDB5XXX_COMMON
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select I8259
+ select IRQ_CPU
+ select SYS_HAS_CPU_R5432
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the R5432-based NEC DDB Vrc-5477,
+ or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
+
+ Features : kernel debugging, serial terminal, NFS root fs, on-board
+ ether port USB, AC97, PCI, etc.
+
+config MACH_VR41XX
+ bool "Support for NEC VR4100 series based machines"
+ select SYS_HAS_CPU_VR41XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+
+config PMC_YOSEMITE
+ bool "Support for PMC-Sierra Yosemite eval board"
+ select DMA_COHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_CPU_RM9K
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ help
+ Yosemite is an evaluation board for the RM9000x2 processor
+ manufactured by PMC-Sierra.
+
+config QEMU
+ bool "Support for Qemu"
+ select DMA_COHERENT
+ select GENERIC_ISA_DMA
+ select HAVE_STD_PC_SERIAL_PORT
+ select I8259
+ select ISA
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ Qemu is a software emulator which among other architectures also
+ can simulate a MIPS32 4Kc system. This patch adds support for the
+ system architecture that currently is being simulated by Qemu. It
+ will eventually be removed again when Qemu has the capability to
+ simulate actual MIPS hardware platforms. More information on Qemu
+ can be found at http://www.linux-mips.org/wiki/Qemu.
+
+config SGI_IP22
+ bool "Support for SGI IP22 (Indy/Indigo2)"
+ select ARC
+ select ARC32
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_EISA
+ select IP22_CPU_SCACHE
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_R4X00
+ select SYS_HAS_CPU_R5000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ This are the SGI Indy, Challenge S and Indigo2, as well as certain
+ OEM variants like the Tandem CMN B006S. To compile a Linux kernel
+ that runs on these, say Y here.
+
+config SGI_IP27
+ bool "Support for SGI IP27 (Origin200/2000)"
+ select ARC
+ select ARC64
+ select BOOT_ELF64
+ select DMA_IP27
+ select HW_HAS_PCI
+ select PCI_DOMAINS
+ select SYS_HAS_CPU_R10000
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
+ workstations. To compile a Linux kernel that runs on these, say Y
+ here.
+
+config SGI_IP32
+ bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select ARC
+ select ARC32
+ select BOOT_ELF32
+ select OWN_DMA
+ select DMA_IP32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select R5000_CPU_SCACHE
+ select RM7000_CPU_SCACHE
+ select SYS_HAS_CPU_R5000
+ select SYS_HAS_CPU_R10000 if BROKEN
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ If you want this kernel to run on SGI O2 workstation, say Y here.
+
+config SIBYTE_BIGSUR
+ bool "Support for Sibyte BigSur"
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select PCI_DOMAINS
+ select SIBYTE_BCM1x80
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_SWARM
+ bool "Support for Sibyte BCM91250A-SWARM"
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_SENTOSA
+ bool "Support for Sibyte BCM91250E-Sentosa"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_RHONE
+ bool "Support for Sibyte BCM91125E-Rhone"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1125H
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_CARMEL
+ bool "Support for Sibyte BCM91120x-Carmel"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1120
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_PTSWARM
+ bool "Support for Sibyte BCM91250PT-PTSWARM"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_LITTLESUR
+ bool "Support for Sibyte BCM91250C2-LittleSur"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_SB1250
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_CRHINE
+ bool "Support for Sibyte BCM91120C-CRhine"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1120
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SIBYTE_CRHONE
+ bool "Support for Sibyte BCM91125C-CRhone"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1125
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_SB1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config SNI_RM200_PCI
+ bool "Support for SNI RM200 PCI"
+ select ARC
+ select ARC32
+ select ARCH_MAY_HAVE_PC_FDC
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select GENERIC_ISA_DMA
+ select HAVE_STD_PC_SERIAL_PORT
+ select HW_HAS_EISA
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select SYS_HAS_CPU_R4X00
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
+ Nixdorf Informationssysteme (SNI), parent company of Pyramid
+ Technology and now in turn merged with Fujitsu. Say Y here to
+ support this machine type.
+
+config TOSHIBA_JMR3927
+ bool "Support for Toshiba JMR-TX3927 board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_TX3927
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX39XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select TOSHIBA_BOARDS
+
+config TOSHIBA_RBTX4927
+ bool "Support for Toshiba TBTX49[23]7 board"
+ select DMA_NONCOHERENT
+ select HAS_TXX9_SERIAL
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX49XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select TOSHIBA_BOARDS
+ help
+ This Toshiba board is based on the TX4927 processor. Say Y here to
+ support this machine type
+
+config TOSHIBA_RBTX4938
+ bool "Support for Toshiba RBTX4938 board"
+ select HAVE_STD_PC_SERIAL_PORT
+ select DMA_NONCOHERENT
+ select GENERIC_ISA_DMA
+ select HAS_TXX9_SERIAL
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX49XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select TOSHIBA_BOARDS
+ help
+ This Toshiba board is based on the TX4938 processor. Say Y here to
+ support this machine type
+
+endchoice
+
+source "arch/mips/ddb5xxx/Kconfig"
+source "arch/mips/gt64120/ev64120/Kconfig"
+source "arch/mips/jazz/Kconfig"
+source "arch/mips/ite-boards/Kconfig"
+source "arch/mips/lasat/Kconfig"
+source "arch/mips/momentum/Kconfig"
+source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/sgi-ip27/Kconfig"
+source "arch/mips/sibyte/Kconfig"
+source "arch/mips/tx4927/Kconfig"
+source "arch/mips/tx4938/Kconfig"
+source "arch/mips/vr41xx/Kconfig"
+source "arch/mips/philips/pnx8550/common/Kconfig"
+
+endmenu
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+#
+# Select some configuration options automatically based on user selections.
+#
+config ARC
+ bool
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+
+config DMA_COHERENT
+ bool
+
+config DMA_IP27
+ bool
+
+config DMA_IP32
+ bool
+ select DMA_NEED_PCI_MAP_STATE
+
+config DMA_NONCOHERENT
+ bool
+ select DMA_NEED_PCI_MAP_STATE
+
+config DMA_NEED_PCI_MAP_STATE
+ bool
+
+config OWN_DMA
+ bool
+
+config EARLY_PRINTK
+ bool
+
+config GENERIC_ISA_DMA
+ bool
+
+config I8259
+ bool
+
+config LIMITED_DMA
+ bool
+ select HIGHMEM
+ select SYS_SUPPORTS_HIGHMEM
+
+config MIPS_BONITO64
+ bool
+
+config MIPS_MSC
+ bool
+
+config MIPS_NILE4
+ bool
+
+config MIPS_DISABLE_OBSOLETE_IDE
+ bool
+
+#
+# Endianess selection. Suffiently obscure so many users don't know what to
+# answer,so we try hard to limit the available choices. Also the use of a
+# choice statement should be more obvious to the user.
+#
+choice
+ prompt "Endianess selection"
+ help
+ Some MIPS machines can be configured for either little or big endian
+ byte order. These modes require different kernels and a different
+ Linux distribution. In general there is one prefered byteorder for a
+ particular system but some systems are just as commonly used in the
+ one or the other endianess.
+
+config CPU_BIG_ENDIAN
+ bool "Big endian"
+ depends on SYS_SUPPORTS_BIG_ENDIAN
+
+config CPU_LITTLE_ENDIAN
+ bool "Little endian"
+ depends on SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+
+endchoice
+
+config SYS_SUPPORTS_BIG_ENDIAN
+ bool
+
+config SYS_SUPPORTS_LITTLE_ENDIAN
+ bool
+
+config IRQ_CPU
+ bool
+
+config IRQ_CPU_RM7K
+ bool
+
+config IRQ_CPU_RM9K
+ bool
+
+config IRQ_MV64340
+ bool
+
+config DDB5XXX_COMMON
+ bool
+
+config MIPS_BOARDS_GEN
+ bool
+
+config MIPS_GT64111
+ bool
+
+config MIPS_GT64120
+ bool
+
+config MIPS_TX3927
+ bool
+ select HAS_TXX9_SERIAL
+
+config PCI_MARVELL
+ bool
+
+config ITE_BOARD_GEN
+ bool
+
+config SOC_AU1000
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1100
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1500
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1550
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1200
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1X00
+ bool
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+
+config PNX8550
+ bool
+ select SOC_PNX8550
+
+config SOC_PNX8550
+ bool
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SYS_HAS_CPU_R4X00
+ select SYS_SUPPORTS_32BIT_KERNEL
+
+config SWAP_IO_SPACE
+ bool
+
+#
+# Unfortunately not all GT64120 systems run the chip at the same clock.
+# As the user for the clock rate and try to minimize the available options.
+#
+choice
+ prompt "Galileo Chip Clock"
+ #default SYSCLK_83 if MIPS_EV64120
+ depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
+ default SYSCLK_83 if MIPS_EV64120
+ default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
+
+config SYSCLK_75
+ bool "75" if MIPS_EV64120
+
+config SYSCLK_83
+ bool "83.3" if MIPS_EV64120
+
+config SYSCLK_100
+ bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
+
+endchoice
+
+config ARC32
+ bool
+
+config AU1X00_USB_DEVICE
+ bool
+ depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
+ default n
+
+config MIPS_GT96100
+ bool
+ select MIPS_GT64120
+
+config IT8172_CIR
+ bool
+ depends on MIPS_ITE8172 || MIPS_IVR
+ default y
+
+config IT8712
+ bool
+ depends on MIPS_ITE8172
+ default y
+
+config BOOT_ELF32
+ bool
+
+config MIPS_L1_CACHE_SHIFT
+ int
+ default "4" if MACH_DECSTATION
+ default "7" if SGI_IP27
+ default "5"
+
+config HAVE_STD_PC_SERIAL_PORT
+ bool
+
+config ARC_CONSOLE
+ bool "ARC console support"
+ depends on SGI_IP22 || SNI_RM200_PCI
+
+config ARC_MEMORY
+ bool
+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
+ default y
+
+config ARC_PROMLIB
+ bool
+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
+ default y
+
+config ARC64
+ bool
+
+config BOOT_ELF64
+ bool
+
+config TOSHIBA_BOARDS
+ bool
+
+menu "CPU selection"
+
+choice
+ prompt "CPU type"
+ default CPU_R4X00
+
+config CPU_MIPS32_R1
+ bool "MIPS32 Release 1"
+ depends on SYS_HAS_CPU_MIPS32_R1
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ help
+ Choose this option to build a kernel for release 1 or later of the
+ MIPS32 architecture. Most modern embedded systems with a 32-bit
+ MIPS processor are based on a MIPS32 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+ Release 2 of the MIPS32 architecture is available since several
+ years so chances are you even have a MIPS32 Release 2 processor
+ in which case you should choose CPU_MIPS32_R2 instead for better
+ performance.
+
+config CPU_MIPS32_R2
+ bool "MIPS32 Release 2"
+ depends on SYS_HAS_CPU_MIPS32_R2
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ help
+ Choose this option to build a kernel for release 2 or later of the
+ MIPS32 architecture. Most modern embedded systems with a 32-bit
+ MIPS processor are based on a MIPS32 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+
+config CPU_MIPS64_R1
+ bool "MIPS64 Release 1"
+ depends on SYS_HAS_CPU_MIPS64_R1
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ Choose this option to build a kernel for release 1 or later of the
+ MIPS64 architecture. Many modern embedded systems with a 64-bit
+ MIPS processor are based on a MIPS64 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+ Release 2 of the MIPS64 architecture is available since several
+ years so chances are you even have a MIPS64 Release 2 processor
+ in which case you should choose CPU_MIPS64_R2 instead for better
+ performance.
+
+config CPU_MIPS64_R2
+ bool "MIPS64 Release 2"
+ depends on SYS_HAS_CPU_MIPS64_R2
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ Choose this option to build a kernel for release 2 or later of the
+ MIPS64 architecture. Many modern embedded systems with a 64-bit
+ MIPS processor are based on a MIPS64 processor. If you know the
+ specific type of processor in your system, choose those that one
+ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+
+config CPU_R3000
+ bool "R3000"
+ depends on SYS_HAS_CPU_R3000
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ help
+ Please make sure to pick the right CPU type. Linux/MIPS is not
+ designed to be generic, i.e. Kernels compiled for R3000 CPUs will
+ *not* work on R4000 machines and vice versa. However, since most
+ of the supported machines have an R4000 (or similar) CPU, R4x00
+ might be a safe bet. If the resulting kernel does not work,
+ try to recompile with R3000.
+
+config CPU_TX39XX
+ bool "R39XX"
+ depends on SYS_HAS_CPU_TX39XX
+ select CPU_SUPPORTS_32BIT_KERNEL
+
+config CPU_VR41XX
+ bool "R41xx"
+ depends on SYS_HAS_CPU_VR41XX
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ The options selects support for the NEC VR4100 series of processors.
+ Only choose this option if you have one of these processors as a
+ kernel built with this option will not run on any other type of
+ processor or vice versa.
+
+config CPU_R4300
+ bool "R4300"
+ depends on SYS_HAS_CPU_R4300
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ MIPS Technologies R4300-series processors.
+
+config CPU_R4X00
+ bool "R4x00"
+ depends on SYS_HAS_CPU_R4X00
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ MIPS Technologies R4000-series processors other than 4300, including
+ the R4000, R4400, R4600, and 4700.
+
+config CPU_TX49XX
+ bool "R49XX"
+ depends on SYS_HAS_CPU_TX49XX
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+
+config CPU_R5000
+ bool "R5000"
+ depends on SYS_HAS_CPU_R5000
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ MIPS Technologies R5000-series processors other than the Nevada.
+
+config CPU_R5432
+ bool "R5432"
+ depends on SYS_HAS_CPU_R5432
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+
+config CPU_R6000
+ bool "R6000"
+ depends on EXPERIMENTAL
+ depends on SYS_HAS_CPU_R6000
+ select CPU_SUPPORTS_32BIT_KERNEL
+ help
+ MIPS Technologies R6000 and R6000A series processors. Note these
+ processors are extremly rare and the support for them is incomplete.
+
+config CPU_NEVADA
+ bool "RM52xx"
+ depends on SYS_HAS_CPU_NEVADA
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ QED / PMC-Sierra RM52xx-series ("Nevada") processors.
+
+config CPU_R8000
+ bool "R8000"
+ depends on EXPERIMENTAL
+ depends on SYS_HAS_CPU_R8000
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_64BIT_KERNEL
+ help
+ MIPS Technologies R8000 processors. Note these processors are
+ uncommon and the support for them is incomplete.
+
+config CPU_R10000
+ bool "R10000"
+ depends on SYS_HAS_CPU_R10000
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ help
+ MIPS Technologies R10000-series processors.
+
+config CPU_RM7000
+ bool "RM7000"
+ depends on SYS_HAS_CPU_RM7000
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
+config CPU_RM9000
+ bool "RM9000"
+ depends on SYS_HAS_CPU_RM9000
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
+config CPU_SB1
+ bool "SB1"
+ depends on SYS_HAS_CPU_SB1
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
+endchoice
+
+config SYS_HAS_CPU_MIPS32_R1
+ bool
+
+config SYS_HAS_CPU_MIPS32_R2
+ bool
+
+config SYS_HAS_CPU_MIPS64_R1
+ bool
+
+config SYS_HAS_CPU_MIPS64_R2
+ bool
+
+config SYS_HAS_CPU_R3000
+ bool
+
+config SYS_HAS_CPU_TX39XX
+ bool
+
+config SYS_HAS_CPU_VR41XX
+ bool
+
+config SYS_HAS_CPU_R4300
+ bool
+
+config SYS_HAS_CPU_R4X00
+ bool
+
+config SYS_HAS_CPU_TX49XX
+ bool
+
+config SYS_HAS_CPU_R5000
+ bool
+
+config SYS_HAS_CPU_R5432
+ bool
+
+config SYS_HAS_CPU_R6000
+ bool
+
+config SYS_HAS_CPU_NEVADA
+ bool
+
+config SYS_HAS_CPU_R8000
+ bool
+
+config SYS_HAS_CPU_R10000
+ bool
+
+config SYS_HAS_CPU_RM7000
+ bool
+
+config SYS_HAS_CPU_RM9000
+ bool
+
+config SYS_HAS_CPU_SB1
+ bool
+
+endmenu
+
+#
+# These two indicate any levelof the MIPS32 and MIPS64 architecture
+#
+config CPU_MIPS32
+ bool
+ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
+
+config CPU_MIPS64
+ bool
+ default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
+
+#
+# These two indicate the revision of the architecture, either 32 bot 64 bit.
+#
+config CPU_MIPSR1
+ bool
+ default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
+
+config CPU_MIPSR2
+ bool
+ default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
+
config SYS_SUPPORTS_32BIT_KERNEL
bool
config SYS_SUPPORTS_64BIT_KERNEL
@@ -39,7 +1342,6 @@
select TRAD_SIGNALS
help
Select this option if you want to build a 32-bit kernel.
-
config 64BIT
bool "64-bit kernel"
depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
@@ -48,1306 +1350,6 @@
endchoice
-endmenu
-
-menu "Machine selection"
-
-config MACH_JAZZ
- bool "Support for the Jazz family of machines"
- select ARC
- select ARC32
- select GENERIC_ISA_DMA
- select I8259
- select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- This a family of machines based on the MIPS R4030 chipset which was
- used by several vendors to build RISC/os and Windows NT workstations.
- Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
- Olivetti M700-10 workstations.
-
-config ACER_PICA_61
- bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
- depends on MACH_JAZZ && EXPERIMENTAL
- select DMA_NONCOHERENT
- help
- This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
- kernel that runs on these, say Y here. For details about Linux on
- the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
- <http://www.linux-mips.org/>.
-
-config MIPS_MAGNUM_4000
- bool "Support for MIPS Magnum 4000"
- depends on MACH_JAZZ
- select DMA_NONCOHERENT
- help
- This is a machine with a R4000 100 MHz CPU. To compile a Linux
- kernel that runs on these, say Y here. For details about Linux on
- the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
- <http://www.linux-mips.org/>.
-
-config OLIVETTI_M700
- bool "Support for Olivetti M700-10"
- depends on MACH_JAZZ
- select DMA_NONCOHERENT
- help
- This is a machine with a R4000 100 MHz CPU. To compile a Linux
- kernel that runs on these, say Y here. For details about Linux on
- the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
- <http://www.linux-mips.org/>.
-
-config MACH_VR41XX
- bool "Support for NEC VR4100 series based machines"
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config NEC_CMBVR4133
- bool "Support for NEC CMB-VR4133"
- depends on MACH_VR41XX
- select CPU_VR41XX
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
-
-config ROCKHOPPER
- bool "Support for Rockhopper baseboard"
- depends on NEC_CMBVR4133
- select I8259
- select HAVE_STD_PC_SERIAL_PORT
-
-config CASIO_E55
- bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select ISA
-
-config IBM_WORKPAD
- bool "Support for IBM WorkPad z50"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select ISA
-
-config TANBAC_TB022X
- bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
- help
- The TANBAC VR4131 multichip module(TB0225) and
- the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
- manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/>
- about VR4131 multichip module and VR4131DIMM.
-
-config TANBAC_TB0226
- bool "Support for TANBAC Mbase(TB0226)"
- depends on TANBAC_TB022X
- select GPIO_VR41XX
- help
- The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/> about Mbase.
-
-config TANBAC_TB0287
- bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
- depends on TANBAC_TB022X
- help
- The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
-
-config VICTOR_MPC30X
- bool "Support for Victor MP-C303/304"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
-
-config ZAO_CAPCELLA
- bool "Support for ZAO Networks Capcella"
- depends on MACH_VR41XX
- select CPU_LITTLE_ENDIAN
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
-
-config PCI_VR41XX
- bool "Add PCI control unit support of NEC VR4100 series"
- depends on MACH_VR41XX && HW_HAS_PCI
- default y
- select PCI
-
-config VRC4173
- tristate "Add NEC VRC4173 companion chip support"
- depends on MACH_VR41XX && PCI_VR41XX
- ---help---
- The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
-
-config TOSHIBA_JMR3927
- bool "Support for Toshiba JMR-TX3927 board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
-
-config MIPS_COBALT
- bool "Support for Cobalt Server"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select I8259
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config MACH_DECSTATION
- bool "Support for DECstations"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- ---help---
- This enables support for DEC's MIPS based workstations. For details
- see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
- DECstation porting pages on <http://decstation.unix-ag.org/>.
-
- If you have one of the following DECstation Models you definitely
- want to choose R4xx0 for the CPU Type:
-
- DECstation 5000/50
- DECstation 5000/150
- DECstation 5000/260
- DECsystem 5900/260
-
- otherwise choose R3000.
-
-config MIPS_EV64120
- bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_GT64120
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This is an evaluation board based on the Galileo GT-64120
- single-chip system controller that contains a MIPS R5000 compatible
- core running at 75/100MHz. Their website is located at
- <http://www.marvell.com/>. Say Y here if you wish to build a
- kernel for this platform.
-
-config EVB_PCI1
- bool "Enable Second PCI (PCI1)"
- depends on MIPS_EV64120
-
-config MIPS_EV96100
- bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select MIPS_GT96100
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This is an evaluation board based on the Galileo GT-96100 LAN/WAN
- communications controllers containing a MIPS R5000 compatible core
- running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
- here if you wish to build a kernel for this platform.
-
-config MIPS_IVR
- bool "Support for Globespan IVR board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- This is an evaluation board built by Globespan to showcase thir
- iVR (Internet Video Recorder) design. It utilizes a QED RM5231
- R5000 MIPS core. More information can be found out their website
- located at <http://www.globespan.net/>. Say Y here if you wish to
- build a kernel for this platform.
-
-config LASAT
- bool "Support for LASAT Networks platforms"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_GT64120
- select R5000_CPU_SCACHE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config PICVUE
- tristate "PICVUE LCD display driver"
- depends on LASAT
-
-config PICVUE_PROC
- tristate "PICVUE LCD display driver /proc interface"
- depends on PICVUE
-
-config DS1603
- bool "DS1603 RTC driver"
- depends on LASAT
-
-config LASAT_SYSCTL
- bool "LASAT sysctl interface"
- depends on LASAT
-
-config MIPS_ITE8172
- bool "Support for ITE 8172G board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
- with ATX form factor that utilizes a MIPS R5000 to work with its
- ITE8172G companion internet appliance chip. The MIPS core can be
- either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
- a kernel for this platform.
-
-config IT8172_REVC
- bool "Support for older IT8172 (Rev C)"
- depends on MIPS_ITE8172
- help
- Say Y here to support the older, Revision C version of the Integrated
- Technology Express, Inc. ITE8172 SBC. Vendor page at
- <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-
-config MIPS_ATLAS
- bool "Support for MIPS Atlas board"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_GT64120
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This enables support for the QED R5231-based MIPS Atlas evaluation
- board.
-
-config MIPS_MALTA
- bool "Support for MIPS Malta board"
- select BOOT_ELF32
- select HAVE_STD_PC_SERIAL_PORT
- select DMA_NONCOHERENT
- select GENERIC_ISA_DMA
- select HW_HAS_PCI
- select I8259
- select MIPS_GT64120
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This enables support for the VR5000-based MIPS Malta evaluation
- board.
-
-config MIPS_SEAD
- bool "Support for MIPS SEAD board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select IRQ_CPU
- select DMA_NONCOHERENT
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
-
-config MOMENCO_OCELOT
- bool "Support for Momentum Ocelot board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select MIPS_GT64120
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config MOMENCO_OCELOT_G
- bool "Support for Momentum Ocelot-G board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config MOMENCO_OCELOT_C
- bool "Support for Momentum Ocelot-C board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_MV64340
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config MOMENCO_OCELOT_3
- bool "Support for Momentum Ocelot-3 board"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_MV64340
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Ocelot-3 is based off Discovery III System Controller and
- PMC-Sierra Rm79000 core.
-
-config MOMENCO_JAGUAR_ATX
- bool "Support for Momentum Jaguar board"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_MV64340
- select LIMITED_DMA
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config JAGUAR_DMALOW
- bool "Low DMA Mode"
- depends on MOMENCO_JAGUAR_ATX
- help
- Select to Y if jump JP5 is set on your board, N otherwise. Normally
- the jumper is set, so if you feel unsafe, just say Y.
-
-config PMC_YOSEMITE
- bool "Support for PMC-Sierra Yosemite eval board"
- select DMA_COHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_CPU_RM9K
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- Yosemite is an evaluation board for the RM9000x2 processor
- manufactured by PMC-Sierra
-
-config HYPERTRANSPORT
- bool "Hypertransport Support for PMC-Sierra Yosemite"
- depends on PMC_YOSEMITE
-
-config DDB5074
- bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This enables support for the VR5000-based NEC DDB Vrc-5074
- evaluation board.
-
-config DDB5476
- bool "Support for NEC DDB Vrc-5476"
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- This enables support for the R5432-based NEC DDB Vrc-5476
- evaluation board.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
- IDE controller, PS2 keyboard, PS2 mouse, etc.
-
-config DDB5477
- bool "Support for NEC DDB Vrc-5477"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select I8259
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- This enables support for the R5432-based NEC DDB Vrc-5477,
- or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, etc.
-
-config DDB5477_BUS_FREQUENCY
- int "bus frequency (in kHZ, 0 for auto-detect)"
- depends on DDB5477
- default 0
-
-config QEMU
- bool "Support for Qemu"
- select DMA_COHERENT
- select GENERIC_ISA_DMA
- select HAVE_STD_PC_SERIAL_PORT
- select I8259
- select ISA
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- help
- Qemu is a software emulator which among other architectures also
- can simulate a MIPS32 4Kc system. This patch adds support for the
- system architecture that currently is being simulated by Qemu. It
- will eventually be removed again when Qemu has the capability to
- simulate actual MIPS hardware platforms. More information on Qemu
- can be found at http://www.linux-mips.org/wiki/Qemu.
-
-config SGI_IP22
- bool "Support for SGI IP22 (Indy/Indigo2)"
- select ARC
- select ARC32
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select IP22_CPU_SCACHE
- select IRQ_CPU
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This are the SGI Indy, Challenge S and Indigo2, as well as certain
- OEM variants like the Tandem CMN B006S. To compile a Linux kernel
- that runs on these, say Y here.
-
-config SGI_IP27
- bool "Support for SGI IP27 (Origin200/2000)"
- select ARC
- select ARC64
- select DMA_IP27
- select HW_HAS_PCI
- select PCI_DOMAINS
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
- workstations. To compile a Linux kernel that runs on these, say Y
- here.
-
-#config SGI_SN0_XXL
-# bool "IP27 XXL"
-# depends on SGI_IP27
-# This options adds support for userspace processes upto 16TB size.
-# Normally the limit is just .5TB.
-
-config SGI_SN0_N_MODE
- bool "IP27 N-Mode"
- depends on SGI_IP27
- help
- The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
- configured in either N-Modes which allows for more nodes or M-Mode
- which allows for more memory. Your system is most probably
- running in M-Mode, so you should say N here.
-
-config ARCH_DISCONTIGMEM_ENABLE
- bool
- default y if SGI_IP27
- help
- Say Y to upport efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
-
-config NUMA
- bool "NUMA Support"
- depends on SGI_IP27
- help
- Say Y to compile the kernel to support NUMA (Non-Uniform Memory
- Access). This option is for configuring high-end multiprocessor
- server machines. If in doubt, say N.
-
-config MAPPED_KERNEL
- bool "Mapped kernel support"
- depends on SGI_IP27
- help
- Change the way a Linux kernel is loaded into memory on a MIPS64
- machine. This is required in order to support text replication and
- NUMA. If you need to understand it, read the source code.
-
-config REPLICATE_KTEXT
- bool "Kernel text replication support"
- depends on SGI_IP27
- help
- Say Y here to enable replicating the kernel text across multiple
- nodes in a NUMA cluster. This trades memory for speed.
-
-config REPLICATE_EXHANDLERS
- bool "Exception handler replication support"
- depends on SGI_IP27
- help
- Say Y here to enable replicating the kernel exception handlers
- across multiple nodes in a NUMA cluster. This trades memory for
- speed.
-
-config SGI_IP32
- bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select ARC
- select ARC32
- select BOOT_ELF32
- select OWN_DMA
- select DMA_IP32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select R5000_CPU_SCACHE
- select RM7000_CPU_SCACHE
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- If you want this kernel to run on SGI O2 workstation, say Y here.
-
-config SOC_AU1X00
- bool "Support for AMD/Alchemy Au1X00 SOCs"
- select SYS_SUPPORTS_32BIT_KERNEL
-
-choice
- prompt "Au1X00 SOC Type"
- depends on SOC_AU1X00
- help
- Say Y here to enable support for one of three AMD/Alchemy
- SOCs. For additional documentation see www.amd.com.
-
-config SOC_AU1000
- bool "SOC_AU1000"
-config SOC_AU1100
- bool "SOC_AU1100"
-config SOC_AU1500
- bool "SOC_AU1500"
-config SOC_AU1550
- bool "SOC_AU1550"
-
-endchoice
-
-choice
- prompt "AMD/Alchemy Au1x00 board support"
- depends on SOC_AU1X00
- help
- These are evaluation boards built by AMD/Alchemy to
- showcase their Au1X00 Internet Edge Processors. The SOC design
- is based on the MIPS32 architecture running at 266/400/500MHz
- with many integrated peripherals. Further information can be
- found at their website, <http://www.amd.com/>. Say Y here if you
- wish to build a kernel for this platform.
-
-config MIPS_PB1000
- bool "PB1000 board"
- depends on SOC_AU1000
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SWAP_IO_SPACE
-
-config MIPS_PB1100
- bool "PB1100 board"
- depends on SOC_AU1100
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select SWAP_IO_SPACE
-
-config MIPS_PB1500
- bool "PB1500 board"
- depends on SOC_AU1500
- select DMA_COHERENT
- select HW_HAS_PCI
-
-config MIPS_PB1550
- bool "PB1550 board"
- depends on SOC_AU1550
- select DMA_COHERENT
- select HW_HAS_PCI
- select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1000
- bool "DB1000 board"
- depends on SOC_AU1000
- select DMA_NONCOHERENT
- select HW_HAS_PCI
-
-config MIPS_DB1100
- bool "DB1100 board"
- depends on SOC_AU1100
- select DMA_NONCOHERENT
-
-config MIPS_DB1500
- bool "DB1500 board"
- depends on SOC_AU1500
- select DMA_COHERENT
- select HW_HAS_PCI
- select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1550
- bool "DB1550 board"
- depends on SOC_AU1550
- select HW_HAS_PCI
- select DMA_COHERENT
- select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_BOSPORUS
- bool "Bosporus board"
- depends on SOC_AU1500
- select DMA_NONCOHERENT
-
-config MIPS_MIRAGE
- bool "Mirage board"
- depends on SOC_AU1500
- select DMA_NONCOHERENT
-
-config MIPS_XXS1500
- bool "MyCable XXS1500 board"
- depends on SOC_AU1500
- select DMA_NONCOHERENT
-
-config MIPS_MTX1
- bool "4G Systems MTX-1 board"
- depends on SOC_AU1500
- select HW_HAS_PCI
- select DMA_NONCOHERENT
-
-endchoice
-
-config SIBYTE_SB1xxx_SOC
- bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select BOOT_ELF32
- select DMA_COHERENT
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
-
-choice
- prompt "BCM1xxx SOC-based board"
- depends on SIBYTE_SB1xxx_SOC
- default SIBYTE_SWARM
- help
- Enable support for boards based on the SiByte line of SOCs
- from Broadcom. There are configurations for the known
- evaluation boards, or you can choose "Other" and add your
- own board support code.
-
-config SIBYTE_SWARM
- bool "BCM91250A-SWARM"
- select SIBYTE_SB1250
-
-config SIBYTE_SENTOSA
- bool "BCM91250E-Sentosa"
- select SIBYTE_SB1250
-
-config SIBYTE_RHONE
- bool "BCM91125E-Rhone"
- select SIBYTE_BCM1125H
-
-config SIBYTE_CARMEL
- bool "BCM91120x-Carmel"
- select SIBYTE_BCM1120
-
-config SIBYTE_PTSWARM
- bool "BCM91250PT-PTSWARM"
- select SIBYTE_SB1250
-
-config SIBYTE_LITTLESUR
- bool "BCM91250C2-LittleSur"
- select SIBYTE_SB1250
-
-config SIBYTE_CRHINE
- bool "BCM91120C-CRhine"
- select SIBYTE_BCM1120
-
-config SIBYTE_CRHONE
- bool "BCM91125C-CRhone"
- select SIBYTE_BCM1125
-
-config SIBYTE_UNKNOWN
- bool "Other"
-
-endchoice
-
-config SIBYTE_BOARD
- bool
- depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
- default y
-
-choice
- prompt "BCM1xxx SOC Type"
- depends on SIBYTE_UNKNOWN
- default SIBYTE_UNK_BCM1250
- help
- Since you haven't chosen a known evaluation board from
- Broadcom, you must explicitly pick the SOC this kernel is
- targetted for.
-
-config SIBYTE_UNK_BCM1250
- bool "BCM1250"
- select SIBYTE_SB1250
-
-config SIBYTE_UNK_BCM1120
- bool "BCM1120"
- select SIBYTE_BCM1120
-
-config SIBYTE_UNK_BCM1125
- bool "BCM1125"
- select SIBYTE_BCM1125
-
-config SIBYTE_UNK_BCM1125H
- bool "BCM1125H"
- select SIBYTE_BCM1125H
-
-endchoice
-
-config SIBYTE_SB1250
- bool
- select HW_HAS_PCI
-
-config SIBYTE_BCM1120
- bool
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125
- bool
- select HW_HAS_PCI
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125H
- bool
- select HW_HAS_PCI
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM112X
- bool
-
-choice
- prompt "SiByte SOC Stepping"
- depends on SIBYTE_SB1xxx_SOC
-
-config CPU_SB1_PASS_1
- bool "1250 Pass1"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
-
-config CPU_SB1_PASS_2_1250
- bool "1250 An"
- depends on SIBYTE_SB1250
- select CPU_SB1_PASS_2
- help
- Also called BCM1250 Pass 2
-
-config CPU_SB1_PASS_2_2
- bool "1250 Bn"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
- help
- Also called BCM1250 Pass 2.2
-
-config CPU_SB1_PASS_4
- bool "1250 Cn"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
- help
- Also called BCM1250 Pass 3
-
-config CPU_SB1_PASS_2_112x
- bool "112x Hybrid"
- depends on SIBYTE_BCM112X
- select CPU_SB1_PASS_2
-
-config CPU_SB1_PASS_3
- bool "112x An"
- depends on SIBYTE_BCM112X
- select CPU_HAS_PREFETCH
-
-endchoice
-
-config CPU_SB1_PASS_2
- bool
-
-config SIBYTE_HAS_LDT
- bool
- depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
- default y
-
-config SIMULATION
- bool "Running under simulation"
- depends on SIBYTE_SB1xxx_SOC
- help
- Build a kernel suitable for running under the GDB simulator.
- Primarily adjusts the kernel's notion of time.
-
-config SIBYTE_CFE
- bool "Booting from CFE"
- depends on SIBYTE_SB1xxx_SOC
- help
- Make use of the CFE API for enumerating available memory,
- controlling secondary CPUs, and possibly console output.
-
-config SIBYTE_CFE_CONSOLE
- bool "Use firmware console"
- depends on SIBYTE_CFE
- help
- Use the CFE API's console write routines during boot. Other console
- options (VT console, sb1250 duart console, etc.) should not be
- configured.
-
-config SIBYTE_STANDALONE
- bool
- depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
- default y
-
-config SIBYTE_STANDALONE_RAM_SIZE
- int "Memory size (in megabytes)"
- depends on SIBYTE_STANDALONE
- default "32"
-
-config SIBYTE_BUS_WATCHER
- bool "Support for Bus Watcher statistics"
- depends on SIBYTE_SB1xxx_SOC
- help
- Handle and keep statistics on the bus error interrupts (COR_ECC,
- BAD_ECC, IO_BUS).
-
-config SIBYTE_BW_TRACE
- bool "Capture bus trace before bus error"
- depends on SIBYTE_BUS_WATCHER
- help
- Run a continuous bus trace, dumping the raw data as soon as
- a ZBbus error is detected. Cannot work if ZBbus profiling
- is turned on, and also will interfere with JTAG-based trace
- buffer activity. Raw buffer data is dumped to console, and
- must be processed off-line.
-
-config SIBYTE_SB1250_PROF
- bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
- depends on SIBYTE_SB1xxx_SOC
-
-config SIBYTE_TBPROF
- bool "Support for ZBbus profiling"
- depends on SIBYTE_SB1xxx_SOC
-
-config SNI_RM200_PCI
- bool "Support for SNI RM200 PCI"
- select ARC
- select ARC32
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select GENERIC_ISA_DMA
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select I8259
- select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- help
- The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
- Nixdorf Informationssysteme (SNI), parent company of Pyramid
- Technology and now in turn merged with Fujitsu. Say Y here to
- support this machine type.
-
-config TOSHIBA_RBTX4927
- bool "Support for Toshiba TBTX49[23]7 board"
- select DMA_NONCOHERENT
- select HAS_TXX9_SERIAL
- select HW_HAS_PCI
- select I8259
- select ISA
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- help
- This Toshiba board is based on the TX4927 processor. Say Y here to
- support this machine type
-
-config TOSHIBA_FPCIB0
- bool "FPCIB0 Backplane Support"
- depends on TOSHIBA_RBTX4927
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-#
-# Select some configuration options automatically based on user selections.
-#
-config ARC
- bool
- depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
- default y
-
-config DMA_COHERENT
- bool
-
-config DMA_IP27
- bool
-
-config DMA_IP32
- bool
- select DMA_NEED_PCI_MAP_STATE
-
-config DMA_NONCOHERENT
- bool
- select DMA_NEED_PCI_MAP_STATE
-
-config DMA_NEED_PCI_MAP_STATE
- bool
-
-config EARLY_PRINTK
- bool
- depends on MACH_DECSTATION
- default y
-
-config GENERIC_ISA_DMA
- bool
- depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
- default y
-
-config I8259
- bool
- depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
- default y
-
-config LIMITED_DMA
- bool
- select HIGHMEM
-
-config MIPS_BONITO64
- bool
- depends on MIPS_ATLAS || MIPS_MALTA
- default y
-
-config MIPS_MSC
- bool
- depends on MIPS_ATLAS || MIPS_MALTA
- default y
-
-config MIPS_NILE4
- bool
- depends on LASAT
- default y
-
-config MIPS_DISABLE_OBSOLETE_IDE
- bool
-
-config CPU_LITTLE_ENDIAN
- bool "Generate little endian code"
- default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
- default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
- help
- Some MIPS machines can be configured for either little or big endian
- byte order. These modes require different kernels. Say Y if your
- machine is little endian, N if it's a big endian machine.
-
-config IRQ_CPU
- bool
-
-config IRQ_CPU_RM7K
- bool
-
-config IRQ_MV64340
- bool
-
-config DDB5XXX_COMMON
- bool
- depends on DDB5074 || DDB5476 || DDB5477
- default y
-
-config MIPS_BOARDS_GEN
- bool
- depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
- default y
-
-config MIPS_GT64111
- bool
- depends on MIPS_COBALT
- default y
-
-config MIPS_GT64120
- bool
- depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
- default y
-
-config MIPS_TX3927
- bool
- depends on TOSHIBA_JMR3927
- select HAS_TXX9_SERIAL
- default y
-
-config PCI_MARVELL
- bool
-
-config ITE_BOARD_GEN
- bool
- depends on MIPS_IVR || MIPS_ITE8172
- default y
-
-config SWAP_IO_SPACE
- bool
-
-#
-# Unfortunately not all GT64120 systems run the chip at the same clock.
-# As the user for the clock rate and try to minimize the available options.
-#
-choice
- prompt "Galileo Chip Clock"
- #default SYSCLK_83 if MIPS_EV64120
- depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
- default SYSCLK_83 if MIPS_EV64120
- default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
-
-config SYSCLK_75
- bool "75" if MIPS_EV64120
-
-config SYSCLK_83
- bool "83.3" if MIPS_EV64120
-
-config SYSCLK_100
- bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
-
-endchoice
-
-config AU1X00_USB_DEVICE
- bool
- depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
- default n
-
-config MIPS_GT96100
- bool
- depends on MIPS_EV96100
- default y
- help
- Say Y here to support the Galileo Technology GT96100 communications
- controller card. There is a web page at <http://www.galileot.com/>.
-
-config IT8172_CIR
- bool
- depends on MIPS_ITE8172 || MIPS_IVR
- default y
-
-config IT8712
- bool
- depends on MIPS_ITE8172
- default y
-
-config BOOT_ELF32
- bool
- depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
- default y
-
-config MIPS_L1_CACHE_SHIFT
- int
- default "4" if MACH_DECSTATION
- default "7" if SGI_IP27
- default "5"
-
-config ARC32
- bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
- default y
-
-config HAVE_STD_PC_SERIAL_PORT
- bool
-
-config ARC_CONSOLE
- bool "ARC console support"
- depends on SGI_IP22 || SNI_RM200_PCI
-
-config ARC_MEMORY
- bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
- default y
-
-config ARC_PROMLIB
- bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
- default y
-
-config ARC64
- bool
- depends on SGI_IP27
- default y
-
-config BOOT_ELF64
- bool
- depends on SGI_IP27
- default y
-
-#config MAPPED_PCI_IO y
-# bool
-# depends on SGI_IP27
-# default y
-
-config QL_ISP_A64
- bool
- depends on SGI_IP27
- default y
-
-config TOSHIBA_BOARDS
- bool
- depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
- default y
-
-endmenu
-
-menu "CPU selection"
-
-choice
- prompt "CPU type"
- default CPU_R4X00
-
-config CPU_MIPS32
- bool "MIPS32"
- select CPU_SUPPORTS_32BIT_KERNEL
-
-config CPU_MIPS64
- bool "MIPS64"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-config CPU_R3000
- bool "R3000"
- select CPU_SUPPORTS_32BIT_KERNEL
- help
- Please make sure to pick the right CPU type. Linux/MIPS is not
- designed to be generic, i.e. Kernels compiled for R3000 CPUs will
- *not* work on R4000 machines and vice versa. However, since most
- of the supported machines have an R4000 (or similar) CPU, R4x00
- might be a safe bet. If the resulting kernel does not work,
- try to recompile with R3000.
-
-config CPU_TX39XX
- bool "R39XX"
- select CPU_SUPPORTS_32BIT_KERNEL
-
-config CPU_VR41XX
- bool "R41xx"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- The options selects support for the NEC VR41xx series of processors.
- Only choose this option if you have one of these processors as a
- kernel built with this option will not run on any other type of
- processor or vice versa.
-
-config CPU_R4300
- bool "R4300"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R4300-series processors.
-
-config CPU_R4X00
- bool "R4x00"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R4000-series processors other than 4300, including
- the R4000, R4400, R4600, and 4700.
-
-config CPU_TX49XX
- bool "R49XX"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-config CPU_R5000
- bool "R5000"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R5000-series processors other than the Nevada.
-
-config CPU_R5432
- bool "R5432"
-
-config CPU_R6000
- bool "R6000"
- depends on EXPERIMENTAL
- select CPU_SUPPORTS_32BIT_KERNEL
- help
- MIPS Technologies R6000 and R6000A series processors. Note these
- processors are extremly rare and the support for them is incomplete.
-
-config CPU_NEVADA
- bool "RM52xx"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- QED / PMC-Sierra RM52xx-series ("Nevada") processors.
-
-config CPU_R8000
- bool "R8000"
- depends on EXPERIMENTAL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R8000 processors. Note these processors are
- uncommon and the support for them is incomplete.
-
-config CPU_R10000
- bool "R10000"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- help
- MIPS Technologies R10000-series processors.
-
-config CPU_RM7000
- bool "RM7000"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-config CPU_RM9000
- bool "RM9000"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-config CPU_SB1
- bool "SB1"
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
-
-endchoice
-
choice
prompt "Kernel page size"
default PAGE_SIZE_4KB
@@ -1416,12 +1418,43 @@
SiByte Linux port. Seems to give a small performance benefit.
config CPU_HAS_PREFETCH
- bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
- default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
+ bool
-config VTAG_ICACHE
- bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
- default y if CPU_SB1
+config MIPS_MT
+ bool "Enable MIPS MT"
+
+choice
+ prompt "MIPS MT options"
+ depends on MIPS_MT
+
+config MIPS_MT_SMP
+ bool "Use 1 TC on each available VPE for SMP"
+ select SMP
+
+config MIPS_VPE_LOADER
+ bool "VPE loader support."
+ depends on MIPS_MT
+ help
+ Includes a loader for loading an elf relocatable object
+ onto another VPE and running it.
+
+endchoice
+
+config MIPS_VPE_LOADER_TOM
+ bool "Load VPE program into memory hidden from linux"
+ depends on MIPS_VPE_LOADER
+ default y
+ help
+ The loader can use memory that is present but has been hidden from
+ Linux using the kernel command line option "mem=xxMB". It's up to
+ you to ensure the amount you put in the option and the space your
+ program requires is less or equal to the amount physically present.
+
+# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
+config MIPS_VPE_APSP_API
+ bool "Enable support for AP/SP API (RTLX)"
+ depends on MIPS_VPE_LOADER
+ help
config SB1_PASS_1_WORKAROUNDS
bool
@@ -1440,7 +1473,7 @@
config 64BIT_PHYS_ADDR
bool "Support for 64-bit physical address space"
- depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+ depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32_R1 || CPU_MIPS64_R1) && 32BIT
config CPU_ADVANCED
bool "Override CPU Options"
@@ -1463,7 +1496,7 @@
config CPU_HAS_LLDSCD
bool "lld/scd Instructions available" if CPU_ADVANCED
- default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32_R1
help
Say Y here if your CPU has the lld and scd instructions, the 64-bit
equivalents of ll and sc. Say Y here for better performance, N if
@@ -1477,12 +1510,52 @@
machines which require flushing of write buffers in software. Saying
Y is the safe option; N may result in kernel malfunction and crashes.
+menu "MIPSR2 Interrupt handling"
+ depends on CPU_MIPSR2 && CPU_ADVANCED
+
+config CPU_MIPSR2_IRQ_VI
+ bool "Vectored interrupt mode"
+ help
+ Vectored interrupt mode allowing faster dispatching of interrupts.
+ The board support code needs to be written to take advantage of this
+ mode. Compatibility code is included to allow the kernel to run on
+ a CPU that does not support vectored interrupts. It's safe to
+ say Y here.
+
+config CPU_MIPSR2_IRQ_EI
+ bool "External interrupt controller mode"
+ help
+ Extended interrupt mode takes advantage of an external interrupt
+ controller to allow fast dispatching from many possible interrupt
+ sources. Say N unless you know that external interrupt support is
+ required.
+
+config CPU_MIPSR2_SRS
+ bool "Make shadow set registers available for interrupt handlers"
+ depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI
+ help
+ Allow the kernel to use shadow register sets for fast interrupts.
+ Interrupt handlers must be specially written to use shadow sets.
+ Say N unless you know that shadow register set upport is needed.
+endmenu
+
config CPU_HAS_SYNC
bool
depends on !CPU_R3000
default y
#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
# caches such as R3000, SB1, R7000 or those that look like they're virtually
@@ -1491,14 +1564,19 @@
# where it's known to be safe. This will not offer highmem on a few systems
# such as MIPS32 and MIPS64 CPUs which may have virtual and physically
# indexed CPUs but we're playing safe.
-# - We should not offer highmem for system of which we already know that they
-# don't have memory configurations that could gain from highmem support in
-# the kernel because they don't support configurations with RAM at physical
-# addresses > 0x20000000.
+# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
+# know they might have memory configurations that could make use of highmem
+# support.
#
config HIGHMEM
bool "High Memory Support"
- depends on 32BIT && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
+ depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM
+
+config CPU_SUPPORTS_HIGHMEM
+ bool
+
+config SYS_SUPPORTS_HIGHMEM
+ bool
config ARCH_FLATMEM_ENABLE
def_bool y
@@ -1508,7 +1586,7 @@
config SMP
bool "Multi-Processing support"
- depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
+ depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -1543,14 +1621,7 @@
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
-config PREEMPT
- bool "Preemptible Kernel"
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
+source "kernel/Kconfig.preempt"
config RTC_DS1742
bool "DS1742 BRAM/RTC support"
@@ -1566,14 +1637,16 @@
This will result in additional memory usage, so it is not
recommended for normal users.
+endmenu
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
-endmenu
-
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
+config HW_HAS_EISA
+ bool
config HW_HAS_PCI
bool
@@ -1607,7 +1680,7 @@
config EISA
bool "EISA support"
- depends on SGI_IP22 || SNI_RM200_PCI
+ depends on HW_HAS_EISA
select ISA
---help---
The Extended Industry Standard Architecture (EISA) bus was
@@ -1641,12 +1714,6 @@
bool
default y
-config MCA
- bool
-
-config SBUS
- bool
-
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
@@ -1659,7 +1726,6 @@
config TRAD_SIGNALS
bool
- default y if 32BIT
config BUILD_ELF64
bool "Use 64-bit ELF format for building"
@@ -1678,7 +1744,7 @@
config BINFMT_IRIX
bool "Include IRIX binary compatibility"
- depends on !CPU_LITTLE_ENDIAN && 32BIT && BROKEN
+ depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
config MIPS32_COMPAT
bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
@@ -1718,9 +1784,26 @@
bool
default y if MIPS32_O32 || MIPS32_N32
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS && BROKEN
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
config PM
bool "Power Management support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MACH_AU1X00
+ depends on EXPERIMENTAL && SOC_AU1X00
endmenu
@@ -1730,6 +1813,8 @@
source "fs/Kconfig"
+source "arch/mips/oprofile/Kconfig"
+
source "arch/mips/Kconfig.debug"
source "security/Kconfig"
@@ -1737,18 +1822,3 @@
source "crypto/Kconfig"
source "lib/Kconfig"
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
-config ISA_DMA_API
- bool
- default y
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 346e803..0269202 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -52,6 +52,21 @@
CROSS_COMPILE := $(tool-prefix)
endif
+CHECKFLAGS-y += -D__linux__ -D__mips__ \
+ -D_ABIO32=1 \
+ -D_ABIN32=2 \
+ -D_ABI64=3
+CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \
+ -D_MIPS_SZLONG=32 \
+ -D__PTRDIFF_TYPE__=int
+CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \
+ -D_MIPS_SZLONG=64 \
+ -D__PTRDIFF_TYPE__="long int"
+CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__
+CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__
+
+CHECKFLAGS = $(CHECKFLAGS-y)
+
ifdef CONFIG_BUILD_ELF64
gas-abi = 64
ld-emul = $(64bit-emul)
@@ -79,9 +94,18 @@
cflags-y += -I $(TOPDIR)/include/asm/gcc
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
cflags-y += $(call cc-option, -finline-limit=100000)
-LDFLAGS_vmlinux += -G 0 -static -n
+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
MODFLAGS += -mlong-calls
+#
+# We explicitly add the endianness specifier if needed, this allows
+# to compile kernels with a toolchain for the other endianness. We
+# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
+# when fed the toolchain default!
+#
+cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
+
cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
#
@@ -167,14 +191,22 @@
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32) += \
+cflags-$(CONFIG_CPU_MIPS32_R1) += \
$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-Wa,--trap
-cflags-$(CONFIG_CPU_MIPS64) += \
+cflags-$(CONFIG_CPU_MIPS32_R2) += \
+ $(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
+ -Wa,--trap
+
+cflags-$(CONFIG_CPU_MIPS64_R1) += \
$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R2) += \
+ $(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
+ -Wa,--trap
+
cflags-$(CONFIG_CPU_R5000) += \
$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
-Wa,--trap
@@ -196,6 +228,7 @@
$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
-Wa,--trap
+
cflags-$(CONFIG_CPU_SB1) += \
$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
-Wa,--trap
@@ -266,6 +299,13 @@
load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000
#
+# AMD Alchemy Pb1200 eval board
+#
+libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00
+load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000
+
+#
# AMD Alchemy Db1000 eval board
#
libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/
@@ -294,6 +334,13 @@
load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
#
+# AMD Alchemy Db1200 eval board
+#
+libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00
+load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
+
+#
# AMD Alchemy Bosporus eval board
#
libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/
@@ -323,6 +370,7 @@
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
+cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/cobalt
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
#
@@ -389,6 +437,13 @@
load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000
#
+# MIPS SIM
+#
+core-$(CONFIG_MIPS_SIM) += arch/mips/mips-boards/sim/
+cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim
+load-$(CONFIG_MIPS_SIM) += 0x80100000
+
+#
# Momentum Ocelot board
#
# The Ocelot setup.o must be linked early - it does the ioremap() for the
@@ -514,6 +569,19 @@
load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000
#
+# Common Philips PNX8550
+#
+core-$(CONFIG_SOC_PNX8550) += arch/mips/philips/pnx8550/common/
+cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550
+
+#
+# Philips PNX8550 JBS board
+#
+libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/
+#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
+load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
+
+#
# SGI IP22 (Indy/Indigo2)
#
# Set the load address to >= 0xffffffff88069000 if you want to leave space for
@@ -582,10 +650,20 @@
# removed (as happens, even if they have __initcall/module_init)
#
core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
#
# Sibyte BCM91120x (Carmel) board
@@ -593,6 +671,7 @@
# Sibyte BCM91125C (CRhone) board
# Sibyte BCM91125E (Rhone) board
# Sibyte SWARM board
+# Sibyte BCM91x80 (BigSur) board
#
libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
@@ -606,6 +685,8 @@
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
+libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
+load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
# SNI RM200 PCI
@@ -629,6 +710,13 @@
core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/
load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000
+#
+# Toshiba RBTX4938 board
+#
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
+load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+
cflags-y += -Iinclude/asm-mips/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
@@ -701,10 +789,29 @@
all: $(vmlinux-64)
endif
+ifdef CONFIG_MIPS_ATLAS
+all: vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_MALTA
+all: vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_SEAD
+all: vmlinux.srec
+endif
+
+ifdef CONFIG_QEMU
+all: vmlinux.bin
+endif
+
ifdef CONFIG_SNI_RM200_PCI
all: vmlinux.ecoff
endif
+vmlinux.bin: $(vmlinux-32)
+ +@$(call makeboot,$@)
+
vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
+@$(call makeboot,$@)
@@ -720,7 +827,6 @@
@$(MAKE) $(clean)=arch/mips/boot
@$(MAKE) $(clean)=arch/mips/lasat
-
CLEAN_FILES += vmlinux.32 \
vmlinux.64 \
vmlinux.ecoff
diff --git a/arch/mips/arc/Makefile b/arch/mips/arc/Makefile
index e842493..4f349ec 100644
--- a/arch/mips/arc/Makefile
+++ b/arch/mips/arc/Makefile
@@ -3,7 +3,7 @@
#
lib-y += cmdline.o env.o file.o identify.o init.o \
- misc.o time.o tree.o
+ misc.o salone.o time.o tree.o
lib-$(CONFIG_ARC_MEMORY) += memory.o
lib-$(CONFIG_ARC_CONSOLE) += arc_con.o
diff --git a/arch/mips/arc/identify.c b/arch/mips/arc/identify.c
index 0dd7a34..1bd6199 100644
--- a/arch/mips/arc/identify.c
+++ b/arch/mips/arc/identify.c
@@ -44,6 +44,11 @@
MACH_GROUP_SGI,
MACH_SGI_IP28,
PROM_FLAG_ARCS
+ }, { "SGI-IP30",
+ "SGI Octane",
+ MACH_GROUP_SGI,
+ MACH_SGI_IP30,
+ PROM_FLAG_ARCS
}, { "SGI-IP32",
"SGI O2",
MACH_GROUP_SGI,
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index 594b75e..a1edfd1 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -8,7 +8,7 @@
obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
- sleeper.o cputable.o dma.o dbdma.o
+ sleeper.o cputable.o dma.o dbdma.o gpio.o
obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o
obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 8a0f39f..0b2c03c 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -173,14 +173,14 @@
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
@@ -201,14 +201,14 @@
{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index f5521df..4dbde82 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -37,7 +37,8 @@
{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
- { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 },
+ { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
+ { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
};
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index adfc317..d00e824 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -29,6 +29,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
+
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -38,10 +39,12 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/system.h>
+
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
/*
@@ -61,37 +64,10 @@
*/
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
-static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized;
+static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static int dbdma_initialized=0;
static void au1xxx_dbdma_init(void);
-typedef struct dbdma_device_table {
- u32 dev_id;
- u32 dev_flags;
- u32 dev_tsize;
- u32 dev_devwidth;
- u32 dev_physaddr; /* If FIFO */
- u32 dev_intlevel;
- u32 dev_intpolarity;
-} dbdev_tab_t;
-
-typedef struct dbdma_chan_config {
- u32 chan_flags;
- u32 chan_index;
- dbdev_tab_t *chan_src;
- dbdev_tab_t *chan_dest;
- au1x_dma_chan_t *chan_ptr;
- au1x_ddma_desc_t *chan_desc_base;
- au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
- void *chan_callparam;
- void (*chan_callback)(int, void *, struct pt_regs *);
-} chan_tab_t;
-
-#define DEV_FLAGS_INUSE (1 << 0)
-#define DEV_FLAGS_ANYUSE (1 << 1)
-#define DEV_FLAGS_OUT (1 << 2)
-#define DEV_FLAGS_IN (1 << 3)
-
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
/* UARTS */
@@ -157,25 +133,25 @@
{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+ { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
+ { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+ { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
- { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+ { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
- { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
- { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
+ { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+ { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
{ DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
- { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
+ { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+ { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+ { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+ { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
@@ -184,6 +160,24 @@
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+ /* Provide 16 user definable device types */
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
};
#define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
@@ -203,6 +197,36 @@
return NULL;
}
+void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+{
+ return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+}
+EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
+
+u32
+au1xxx_ddma_add_device(dbdev_tab_t *dev)
+{
+ u32 ret = 0;
+ dbdev_tab_t *p=NULL;
+ static u16 new_id=0x1000;
+
+ p = find_dbdev_id(0);
+ if ( NULL != p )
+ {
+ memcpy(p, dev, sizeof(dbdev_tab_t));
+ p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+ ret = p->dev_id;
+ new_id++;
+#if 0
+ printk("add_device: id:%x flags:%x padd:%x\n",
+ p->dev_id, p->dev_flags, p->dev_physaddr );
+#endif
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(au1xxx_ddma_add_device);
+
/* Allocate a channel and return a non-zero descriptor if successful.
*/
u32
@@ -215,7 +239,7 @@
int i;
dbdev_tab_t *stp, *dtp;
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
/* We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
@@ -225,9 +249,6 @@
au1xxx_dbdma_init();
dbdma_initialized = 1;
- if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS))
- return 0;
-
if ((stp = find_dbdev_id(srcid)) == NULL) return 0;
if ((dtp = find_dbdev_id(destid)) == NULL) return 0;
@@ -271,7 +292,6 @@
*/
ctp = kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
chan_tab_ptr[i] = ctp;
- ctp->chan_index = chan = i;
break;
}
}
@@ -279,10 +299,11 @@
if (ctp != NULL) {
memset(ctp, 0, sizeof(chan_tab_t));
+ ctp->chan_index = chan = i;
dcp = DDMA_CHANNEL_BASE;
dcp += (0x0100 * chan);
ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
- cp = (volatile au1x_dma_chan_t *)dcp;
+ cp = (au1x_dma_chan_t *)dcp;
ctp->chan_src = stp;
ctp->chan_dest = dtp;
ctp->chan_callback = callback;
@@ -299,6 +320,9 @@
i |= DDMA_CFG_DED;
if (dtp->dev_intpolarity)
i |= DDMA_CFG_DP;
+ if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+ (dtp->dev_flags & DEV_FLAGS_SYNC))
+ i |= DDMA_CFG_SYNC;
cp->ddma_cfg = i;
au_sync();
@@ -309,14 +333,14 @@
rv = (u32)(&chan_tab_ptr[chan]);
}
else {
- /* Release devices.
- */
+ /* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
}
}
return rv;
}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
/* Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
@@ -344,6 +368,7 @@
return rv;
}
+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
/* Allocate a descriptor ring, initializing as much as possible.
*/
@@ -370,7 +395,8 @@
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
- desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
+ desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
+ GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
@@ -381,7 +407,7 @@
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
+ if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
@@ -403,7 +429,13 @@
cmd0 |= DSCR_CMD0_SID(srcid);
cmd0 |= DSCR_CMD0_DID(destid);
cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
- cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_CURRENT);
+ cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
+
+ /* is it mem to mem transfer? */
+ if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+ ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
+ cmd0 |= DSCR_CMD0_MEM;
+ }
switch (stp->dev_devwidth) {
case 8:
@@ -461,9 +493,14 @@
/* If source input is fifo, set static address.
*/
if (stp->dev_flags & DEV_FLAGS_IN) {
- src0 = stp->dev_physaddr;
+ if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
+ else
src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+
}
+ if (stp->dev_physaddr)
+ src0 = stp->dev_physaddr;
/* Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
@@ -487,10 +524,18 @@
/* If destination output is fifo, set static address.
*/
if (dtp->dev_flags & DEV_FLAGS_OUT) {
- dest0 = dtp->dev_physaddr;
+ if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+ else
dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
+ if (dtp->dev_physaddr)
+ dest0 = dtp->dev_physaddr;
+#if 0
+ printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+#endif
for (i=0; i<entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
@@ -499,6 +544,8 @@
dp->dscr_dest0 = dest0;
dp->dscr_dest1 = dest1;
dp->dscr_stat = 0;
+ dp->sw_context = 0;
+ dp->sw_status = 0;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
dp++;
}
@@ -511,13 +558,14 @@
return (u32)(ctp->chan_desc_base);
}
+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
/* Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
u32
-au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -544,8 +592,24 @@
*/
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
- ctp->chan_ptr->ddma_dbell = 0xffffffff; /* Make it go */
+ /* Check flags */
+ if (flags & DDMA_FLAGS_IE)
+ dp->dscr_cmd0 |= DSCR_CMD0_IE;
+ if (flags & DDMA_FLAGS_NOIE)
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
+ /*
+ * There is an errata on the Au1200/Au1550 parts that could result
+ * in "stale" data being DMA'd. It has to do with the snoop logic on
+ * the dache eviction buffer. NONCOHERENT_IO is on by default for
+ * these parts. If it is fixedin the future, these dma_cache_inv will
+ * just be nothing more than empty macros. See io.h.
+ * */
+ dma_cache_wback_inv((unsigned long)buf, nbytes);
+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ au_sync();
+ dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+ ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer.
*/
@@ -555,13 +619,14 @@
*/
return nbytes;
}
+EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
/* Put a destination buffer into the DMA ring.
* This updates the destination pointer and byte count. Normally used
* to place an empty buffer into the ring for fifo to memory transfers.
*/
u32
-au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -583,11 +648,33 @@
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Load up buffer address and byte count.
- */
+ /* Load up buffer address and byte count */
+
+ /* Check flags */
+ if (flags & DDMA_FLAGS_IE)
+ dp->dscr_cmd0 |= DSCR_CMD0_IE;
+ if (flags & DDMA_FLAGS_NOIE)
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
+#if 0
+ printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+#endif
+ /*
+ * There is an errata on the Au1200/Au1550 parts that could result in
+ * "stale" data being DMA'd. It has to do with the snoop logic on the
+ * dache eviction buffer. NONCOHERENT_IO is on by default for these
+ * parts. If it is fixedin the future, these dma_cache_inv will just
+ * be nothing more than empty macros. See io.h.
+ * */
+ dma_cache_inv((unsigned long)buf,nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ au_sync();
+ dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+ ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer.
*/
@@ -597,6 +684,7 @@
*/
return nbytes;
}
+EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
/* Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
@@ -646,7 +734,7 @@
au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
int halt_timeout = 0;
ctp = *((chan_tab_t **)chanid);
@@ -666,6 +754,7 @@
cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
au_sync();
}
+EXPORT_SYMBOL(au1xxx_dbdma_stop);
/* Start using the current descriptor pointer. If the dbdma encounters
* a not valid descriptor, it will stop. In this case, we can just
@@ -675,17 +764,17 @@
au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
ctp = *((chan_tab_t **)chanid);
-
cp = ctp->chan_ptr;
cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
au_sync();
- cp->ddma_dbell = 0xffffffff; /* Make it go */
+ cp->ddma_dbell = 0;
au_sync();
}
+EXPORT_SYMBOL(au1xxx_dbdma_start);
void
au1xxx_dbdma_reset(u32 chanid)
@@ -704,15 +793,21 @@
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
+ /* reset our SW status -- this is used to determine
+ * if a descriptor is in use by upper level SW. Since
+ * posting can reset 'V' bit.
+ */
+ dp->sw_status = 0;
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
+EXPORT_SYMBOL(au1xxx_dbdma_reset);
u32
au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
u32 rv;
ctp = *((chan_tab_t **)chanid);
@@ -738,8 +833,7 @@
au1xxx_dbdma_stop(chanid);
- if (ctp->chan_desc_base != NULL)
- kfree(ctp->chan_desc_base);
+ kfree((void *)ctp->chan_desc_base);
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -747,15 +841,16 @@
kfree(ctp);
}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
static irqreturn_t
dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- u32 intstat;
- u32 chan_index;
+ u32 intstat;
+ u32 chan_index;
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
intstat = dbdma_gptr->ddma_intstat;
au_sync();
@@ -774,19 +869,27 @@
(ctp->chan_callback)(irq, ctp->chan_callparam, regs);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
-
- return IRQ_HANDLED;
+ return IRQ_RETVAL(1);
}
-static void
-au1xxx_dbdma_init(void)
+static void au1xxx_dbdma_init(void)
{
+ int irq_nr;
+
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
- if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT,
+#if defined(CONFIG_SOC_AU1550)
+ irq_nr = AU1550_DDMA_INT;
+#elif defined(CONFIG_SOC_AU1200)
+ irq_nr = AU1200_DDMA_INT;
+#else
+ #error Unknown Au1x00 SOC
+#endif
+
+ if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
"Au1xxx dbdma", (void *)dbdma_gptr))
printk("Can't get 1550 dbdma irq");
}
@@ -797,7 +900,8 @@
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
dbdev_tab_t *stp, *dtp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
+ u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
@@ -822,15 +926,64 @@
dp = ctp->chan_desc_base;
do {
- printk("dp %08x, cmd0 %08x, cmd1 %08x\n",
- (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
- printk("src0 %08x, src1 %08x, dest0 %08x\n",
- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0);
- printk("dest1 %08x, stat %08x, nxtptr %08x\n",
- dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr);
+ printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+ printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+ dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
+ printk("stat %08x, nxtptr %08x\n",
+ dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
+/* Put a descriptor into the DMA ring.
+ * This updates the source/destination pointers and byte count.
+ */
+u32
+au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+{
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+ u32 nbytes=0;
+
+ /* I guess we could check this to be within the
+ * range of the table......
+ */
+ ctp = *((chan_tab_t **)chanid);
+
+ /* We should have multiple callers for a particular channel,
+ * an interrupt doesn't affect this pointer nor the descriptor,
+ * so no locking should be needed.
+ */
+ dp = ctp->put_ptr;
+
+ /* If the descriptor is valid, we are way ahead of the DMA
+ * engine, so just return an error condition.
+ */
+ if (dp->dscr_cmd0 & DSCR_CMD0_V)
+ return 0;
+
+ /* Load up buffer addresses and byte count.
+ */
+ dp->dscr_dest0 = dscr->dscr_dest0;
+ dp->dscr_source0 = dscr->dscr_source0;
+ dp->dscr_dest1 = dscr->dscr_dest1;
+ dp->dscr_source1 = dscr->dscr_source1;
+ dp->dscr_cmd1 = dscr->dscr_cmd1;
+ nbytes = dscr->dscr_cmd1;
+ /* Allow the caller to specifiy if an interrupt is generated */
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+ dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
+ ctp->chan_ptr->ddma_dbell = 0;
+
+ /* Get next descriptor pointer.
+ */
+ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+ /* return something not zero.
+ */
+ return nbytes;
+}
+
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 372c33f..1905c6b 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -39,7 +39,6 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
new file mode 100644
index 0000000..5f5915b
--- /dev/null
+++ b/arch/mips/au1000/common/gpio.c
@@ -0,0 +1,119 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <au1000.h>
+#include <au1xxx_gpio.h>
+
+#define gpio1 sys
+#if !defined(CONFIG_SOC_AU1000)
+static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
+
+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+
+int au1xxx_gpio2_read(int signal)
+{
+ signal -= 200;
+/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */
+ return ((gpio2->pinstate >> signal) & 0x01);
+}
+
+void au1xxx_gpio2_write(int signal, int value)
+{
+ signal -= 200;
+
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
+ (value << signal);
+}
+
+void au1xxx_gpio2_tristate(int signal)
+{
+ signal -= 200;
+ gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */
+}
+#endif
+
+int au1xxx_gpio1_read(int signal)
+{
+/* gpio1->trioutclr |= (0x01 << signal); */
+ return ((gpio1->pinstaterd >> signal) & 0x01);
+}
+
+void au1xxx_gpio1_write(int signal, int value)
+{
+ if(value)
+ gpio1->outputset = (0x01 << signal);
+ else
+ gpio1->outputclr = (0x01 << signal); /* Output a Zero */
+}
+
+void au1xxx_gpio1_tristate(int signal)
+{
+ gpio1->trioutclr = (0x01 << signal); /* Tristate signal */
+}
+
+
+int au1xxx_gpio_read(int signal)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ return 0;
+#else
+ return au1xxx_gpio2_read(signal);
+#endif
+ else
+ return au1xxx_gpio1_read(signal);
+}
+
+void au1xxx_gpio_write(int signal, int value)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ ;
+#else
+ au1xxx_gpio2_write(signal, value);
+#endif
+ else
+ au1xxx_gpio1_write(signal, value);
+}
+
+void au1xxx_gpio_tristate(int signal)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ ;
+#else
+ au1xxx_gpio2_tristate(signal);
+#endif
+ else
+ au1xxx_gpio1_tristate(signal);
+}
+
+void au1xxx_gpio1_set_inputs(void)
+{
+ gpio1->pininputen = 0;
+}
+
+EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
+EXPORT_SYMBOL(au1xxx_gpio_tristate);
+EXPORT_SYMBOL(au1xxx_gpio_write);
+EXPORT_SYMBOL(au1xxx_gpio_read);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index d1eb5a4..1339a09 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -83,7 +83,7 @@
void (*board_init_irq)(void);
#ifdef CONFIG_PM
-extern void counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
#endif
static DEFINE_SPINLOCK(irq_lock);
@@ -253,52 +253,72 @@
static struct hw_interrupt_type rise_edge_irq_type = {
- "Au1000 Rise Edge",
- startup_irq,
- shutdown_irq,
- local_enable_irq,
- local_disable_irq,
- mask_and_ack_rise_edge_irq,
- end_irq,
- NULL
+ .typename = "Au1000 Rise Edge",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = local_enable_irq,
+ .disable = local_disable_irq,
+ .ack = mask_and_ack_rise_edge_irq,
+ .end = end_irq,
};
static struct hw_interrupt_type fall_edge_irq_type = {
- "Au1000 Fall Edge",
- startup_irq,
- shutdown_irq,
- local_enable_irq,
- local_disable_irq,
- mask_and_ack_fall_edge_irq,
- end_irq,
- NULL
+ .typename = "Au1000 Fall Edge",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = local_enable_irq,
+ .disable = local_disable_irq,
+ .ack = mask_and_ack_fall_edge_irq,
+ .end = end_irq,
};
static struct hw_interrupt_type either_edge_irq_type = {
- "Au1000 Rise or Fall Edge",
- startup_irq,
- shutdown_irq,
- local_enable_irq,
- local_disable_irq,
- mask_and_ack_either_edge_irq,
- end_irq,
- NULL
+ .typename = "Au1000 Rise or Fall Edge",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = local_enable_irq,
+ .disable = local_disable_irq,
+ .ack = mask_and_ack_either_edge_irq,
+ .end = end_irq,
};
static struct hw_interrupt_type level_irq_type = {
- "Au1000 Level",
- startup_irq,
- shutdown_irq,
- local_enable_irq,
- local_disable_irq,
- mask_and_ack_level_irq,
- end_irq,
- NULL
+ .typename = "Au1000 Level",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = local_enable_irq,
+ .disable = local_disable_irq,
+ .ack = mask_and_ack_level_irq,
+ .end = end_irq,
};
#ifdef CONFIG_PM
-void startup_match20_interrupt(void)
+void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *))
{
+ struct irq_desc *desc = &irq_desc[AU1000_TOY_MATCH2_INT];
+
+ static struct irqaction action;
+ memset(&action, 0, sizeof(struct irqaction));
+
+ /* This is a big problem.... since we didn't use request_irq
+ * when kernel/irq.c calls probe_irq_xxx this interrupt will
+ * be probed for usage. This will end up disabling the device :(
+ * Give it a bogus "action" pointer -- this will keep it from
+ * getting auto-probed!
+ *
+ * By setting the status to match that of request_irq() we
+ * can avoid it. --cgray
+ */
+ action.dev_id = handler;
+ action.flags = SA_INTERRUPT;
+ cpus_clear(action.mask);
+ action.name = "Au1xxx TOY";
+ action.handler = handler;
+ action.next = NULL;
+
+ desc->action = &action;
+ desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
+
local_enable_irq(AU1000_TOY_MATCH2_INT);
}
#endif
@@ -426,7 +446,6 @@
extern int au1xxx_ic0_nr_irqs;
cp0_status = read_c0_status();
- memset(irq_desc, 0, sizeof(irq_desc));
set_except_vector(0, au1000_IRQ);
/* Initialize interrupt controllers to a safe state.
@@ -492,7 +511,7 @@
intc0_req0 |= au_readl(IC0_REQ0INT);
if (!intc0_req0) return;
-
+#ifdef AU1000_USB_DEV_REQ_INT
/*
* Because of the tight timing of SETUP token to reply
* transactions, the USB devices-side packet complete
@@ -503,7 +522,7 @@
do_IRQ(AU1000_USB_DEV_REQ_INT, regs);
return;
}
-
+#endif
irq = au_ffs(intc0_req0) - 1;
intc0_req0 &= ~(1<<irq);
do_IRQ(irq, regs);
@@ -521,17 +540,7 @@
irq = au_ffs(intc0_req1) - 1;
intc0_req1 &= ~(1<<irq);
-#ifdef CONFIG_PM
- if (irq == AU1000_TOY_MATCH2_INT) {
- mask_and_ack_rise_edge_irq(irq);
- counter0_irq(irq, NULL, regs);
- local_enable_irq(irq);
- }
- else
-#endif
- {
- do_IRQ(irq, regs);
- }
+ do_IRQ(irq, regs);
}
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 0776b2d..1f7b465 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -7,13 +7,15 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
+#include <linux/config.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/resource.h>
-#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx.h>
+/* OHCI (USB full speed host controller) */
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
.start = USB_OHCI_BASE,
@@ -41,8 +43,252 @@
.resource = au1xxx_usb_ohci_resources,
};
+/*** AU1100 LCD controller ***/
+
+#ifdef CONFIG_FB_AU1100
+static struct resource au1100_lcd_resources[] = {
+ [0] = {
+ .start = LCD_PHYS_ADDR,
+ .end = LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1100_LCD_INT,
+ .end = AU1100_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1100_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1100_lcd_device = {
+ .name = "au1100-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1100_lcd_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1100_lcd_resources),
+ .resource = au1100_lcd_resources,
+};
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+/* EHCI (USB high speed host controller) */
+static struct resource au1xxx_usb_ehci_resources[] = {
+ [0] = {
+ .start = USB_EHCI_BASE,
+ .end = USB_EHCI_BASE + USB_EHCI_LEN - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1000_USB_HOST_INT,
+ .end = AU1000_USB_HOST_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_ehci_device = {
+ .name = "au1xxx-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources),
+ .resource = au1xxx_usb_ehci_resources,
+};
+
+/* Au1200 UDC (USB gadget controller) */
+static struct resource au1xxx_usb_gdt_resources[] = {
+ [0] = {
+ .start = USB_UDC_BASE,
+ .end = USB_UDC_BASE + USB_UDC_LEN - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_USB_INT,
+ .end = AU1200_USB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource au1xxx_mmc_resources[] = {
+ [0] = {
+ .start = SD0_PHYS_ADDR,
+ .end = SD0_PHYS_ADDR + 0x40,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SD1_PHYS_ADDR,
+ .end = SD1_PHYS_ADDR + 0x40,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AU1200_SD_INT,
+ .end = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_gdt_device = {
+ .name = "au1xxx-udc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &udc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources),
+ .resource = au1xxx_usb_gdt_resources,
+};
+
+/* Au1200 UOC (USB OTG controller) */
+static struct resource au1xxx_usb_otg_resources[] = {
+ [0] = {
+ .start = USB_UOC_BASE,
+ .end = USB_UOC_BASE + USB_UOC_LEN - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_USB_INT,
+ .end = AU1200_USB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 uoc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_otg_device = {
+ .name = "au1xxx-uoc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &uoc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources),
+ .resource = au1xxx_usb_otg_resources,
+};
+
+static struct resource au1200_lcd_resources[] = {
+ [0] = {
+ .start = LCD_PHYS_ADDR,
+ .end = LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_LCD_INT,
+ .end = AU1200_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource au1200_ide0_resources[] = {
+ [0] = {
+ .start = AU1XXX_ATA_PHYS_ADDR,
+ .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1XXX_ATA_INT,
+ .end = AU1XXX_ATA_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1200_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1200_lcd_device = {
+ .name = "au1200-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1200_lcd_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1200_lcd_resources),
+ .resource = au1200_lcd_resources,
+};
+
+
+static u64 ide0_dmamask = ~(u32)0;
+
+static struct platform_device au1200_ide0_device = {
+ .name = "au1200-ide",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ide0_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1200_ide0_resources),
+ .resource = au1200_ide0_resources,
+};
+
+static u64 au1xxx_mmc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_mmc_device = {
+ .name = "au1xxx-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1xxx_mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(au1xxx_mmc_resources),
+ .resource = au1xxx_mmc_resources,
+};
+#endif /* #ifdef CONFIG_SOC_AU1200 */
+
+static struct platform_device au1x00_pcmcia_device = {
+ .name = "au1x00-pcmcia",
+ .id = 0,
+};
+
+#ifdef CONFIG_MIPS_DB1200
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = AU1XXX_SMC91111_PHYS_ADDR,
+ .end = AU1XXX_SMC91111_PHYS_ADDR + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1XXX_SMC91111_IRQ,
+ .end = AU1XXX_SMC91111_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+#endif
+
static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xxx_usb_ohci_device,
+ &au1x00_pcmcia_device,
+#ifdef CONFIG_FB_AU1100
+ &au1100_lcd_device,
+#endif
+#ifdef CONFIG_SOC_AU1200
+#if 0 /* fixme */
+ &au1xxx_usb_ehci_device,
+#endif
+ &au1xxx_usb_gdt_device,
+ &au1xxx_usb_otg_device,
+ &au1200_lcd_device,
+ &au1200_ide0_device,
+ &au1xxx_mmc_device,
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ &smc91x_device,
+#endif
};
int au1xxx_platform_init(void)
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index c40dacc..f85093b 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -34,11 +34,13 @@
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
+#include <linux/jiffies.h>
#include <asm/string.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
+#include <asm/cacheflush.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_PM
@@ -50,7 +52,7 @@
# define DPRINTK(fmt, args...)
#endif
-static void calibrate_delay(void);
+static void au1000_calibrate_delay(void);
extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1x00_speed(void);
@@ -260,7 +262,7 @@
}
static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
- void *buffer, size_t * len)
+ void __user *buffer, size_t * len, loff_t *ppos)
{
int retval = 0;
#ifdef SLEEP_TEST_TIMEOUT
@@ -294,10 +296,9 @@
}
static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
- void *buffer, size_t * len)
+ void __user *buffer, size_t * len, loff_t *ppos)
{
int retval = 0;
- void au1k_wait(void);
if (!write) {
*len = 0;
@@ -306,7 +307,7 @@
if (retval)
return retval;
suspend_mode = 1;
- au1k_wait();
+
retval = pm_send_all(PM_RESUME, (void *) 0);
}
return retval;
@@ -314,7 +315,7 @@
static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
- void *buffer, size_t * len)
+ void __user *buffer, size_t * len, loff_t *ppos)
{
int retval = 0, i;
unsigned long val, pll;
@@ -409,14 +410,14 @@
/* We don't want _any_ interrupts other than
- * match20. Otherwise our calibrate_delay()
+ * match20. Otherwise our au1000_calibrate_delay()
* calculation will be off, potentially a lot.
*/
intc0_mask = save_local_and_disable(0);
intc1_mask = save_local_and_disable(1);
local_enable_irq(AU1000_TOY_MATCH2_INT);
spin_unlock_irqrestore(&pm_lock, flags);
- calibrate_delay();
+ au1000_calibrate_delay();
restore_local_and_enable(0, intc0_mask);
restore_local_and_enable(1, intc1_mask);
return retval;
@@ -456,7 +457,7 @@
better than 1% */
#define LPS_PREC 8
-static void calibrate_delay(void)
+static void au1000_calibrate_delay(void)
{
unsigned long ticks, loopbit;
int lps_precision = LPS_PREC;
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index 22e5a85..9c171af 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -75,7 +75,8 @@
}
if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
--cp;
- *cp = '\0';
+ if (prom_argc > 1)
+ *cp = '\0';
}
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c
index c2ae462..2705829 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/au1000/common/puts.c
@@ -39,7 +39,6 @@
#define TIMEOUT 0xffffff
#define SLOW_DOWN
-static const char digits[16] = "0123456789abcdef";
static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
@@ -54,7 +53,7 @@
#endif
void
-putch(const unsigned char c)
+prom_putchar(const unsigned char c)
{
unsigned char ch;
int i = 0;
@@ -69,77 +68,3 @@
} while (0 == (ch & TX_BUSY));
com1[SER_DATA] = c;
}
-
-void
-puts(unsigned char *cp)
-{
- unsigned char ch;
- int i = 0;
-
- while (*cp) {
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = *cp++;
- }
- putch('\r');
- putch('\n');
-}
-
-void
-fputs(const char *cp)
-{
- unsigned char ch;
- int i = 0;
-
- while (*cp) {
-
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = *cp++;
- }
-}
-
-
-void
-put64(uint64_t ul)
-{
- int cnt;
- unsigned ch;
-
- cnt = 16; /* 16 nibbles in a 64 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char)(ul >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
-
-void
-put32(unsigned u)
-{
- int cnt;
- unsigned ch;
-
- cnt = 8; /* 8 nibbles in a 32 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char)(u >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index eff89e1..1ef15d5 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -32,6 +32,7 @@
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
@@ -57,7 +58,7 @@
extern void au1xxx_timer_setup(struct irqaction *irq);
extern void set_cpuspec(void);
-static int __init au1x00_setup(void)
+void __init plat_setup(void)
{
struct cpu_spec *sp;
char *argptr;
@@ -106,8 +107,6 @@
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
#ifdef CONFIG_MIPS_HYDROGEN3
strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor");
-#else
- strcat(argptr, " video=au1100fb:panel:s10,nohwcursor");
#endif
}
#endif
@@ -153,15 +152,11 @@
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
au_writel(0, SYS_TOYTRIM);
-
- return 0;
}
-early_initcall(au1x00_setup);
-
#if defined(CONFIG_64BIT_PHYS_ADDR)
/* This routine should be valid for all Au1x based boards */
-phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
u32 start, end;
@@ -192,4 +187,5 @@
/* default nop */
return phys_addr;
}
+EXPORT_SYMBOL(__fixup_bigphys_addr);
#endif
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index 57675b4..883d3f3 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -50,7 +50,6 @@
#include <linux/mc146818rtc.h>
#include <linux/timex.h>
-extern void startup_match20_interrupt(void);
extern void do_softirq(void);
extern volatile unsigned long wall_jiffies;
unsigned long missed_heart_beats = 0;
@@ -58,14 +57,17 @@
static unsigned long r4k_offset; /* Amount to increment compare reg each time */
static unsigned long r4k_cur; /* What counter should be at next timer irq */
int no_au1xxx_32khz;
-void (*au1k_wait_ptr)(void);
+extern int allow_au1k_wait; /* default off for CP0 Counter */
/* Cycle counter value at the previous timer interrupt.. */
static unsigned int timerhi = 0, timerlo = 0;
#ifdef CONFIG_PM
-#define MATCH20_INC 328
-extern void startup_match20_interrupt(void);
+#if HZ < 100 || HZ > 1000
+#error "unsupported HZ value! Must be in [100,1000]"
+#endif
+#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
+extern void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *));
static unsigned long last_pc0, last_match20;
#endif
@@ -117,17 +119,16 @@
}
#ifdef CONFIG_PM
-void counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long pc0;
int time_elapsed;
static int jiffie_drift = 0;
- kstat.irqs[0][irq]++;
if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
/* should never happen! */
- printk(KERN_WARNING "counter 0 w status eror\n");
- return;
+ printk(KERN_WARNING "counter 0 w status error\n");
+ return IRQ_NONE;
}
pc0 = au_readl(SYS_TOYREAD);
@@ -164,6 +165,8 @@
update_process_times(user_mode(regs));
#endif
}
+
+ return IRQ_HANDLED;
}
/* When we wakeup from sleep, we have to "catch up" on all of the
@@ -388,7 +391,6 @@
{
unsigned int est_freq;
extern unsigned long (*do_gettimeoffset)(void);
- extern void au1k_wait(void);
printk("calculating r4koff... ");
r4k_offset = cal_r4koff();
@@ -441,18 +443,18 @@
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- /* setup match20 to interrupt once every 10ms */
+ /* setup match20 to interrupt once every HZ */
last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- startup_match20_interrupt();
+ startup_match20_interrupt(counter0_irq);
do_gettimeoffset = do_fast_pm_gettimeoffset;
/* We can use the real 'wait' instruction.
*/
- au1k_wait_ptr = au1k_wait;
+ allow_au1k_wait = 1;
}
#else
diff --git a/arch/mips/au1000/common/usbdev.c b/arch/mips/au1000/common/usbdev.c
index 447a9a4..0b21bed 100644
--- a/arch/mips/au1000/common/usbdev.c
+++ b/arch/mips/au1000/common/usbdev.c
@@ -1005,11 +1005,11 @@
#endif
dev->ep0_stage = SETUP_STAGE;
break;
- }
+ }
spin_unlock(&ep0->lock);
- // we're done processing the packet, free it
- kfree(pkt);
+ // we're done processing the packet, free it
+ kfree(pkt);
}
@@ -1072,8 +1072,7 @@
clear_dma_done1(ep0->indma);
pkt = send_packet_complete(ep0);
- if (pkt)
- kfree(pkt);
+ kfree(pkt);
}
/*
@@ -1302,8 +1301,7 @@
endpoint_flush(ep);
}
- if (usbdev.full_conf_desc)
- kfree(usbdev.full_conf_desc);
+ kfree(usbdev.full_conf_desc);
}
int
diff --git a/arch/mips/au1000/csb250/init.c b/arch/mips/au1000/csb250/init.c
index bd99733..a4898b1 100644
--- a/arch/mips/au1000/csb250/init.c
+++ b/arch/mips/au1000/csb250/init.c
@@ -35,7 +35,6 @@
#include <asm/bootinfo.h>
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index 8f6ef0d..f63024a 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -48,6 +48,38 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
+#ifdef CONFIG_MIPS_DB1500
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
+ [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
+ [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
+ [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
+};
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
+ [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+};
+#endif
+
+
au1xxx_irq_map_t au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c
index ade35e4..c29852c 100644
--- a/arch/mips/au1000/db1x00/mirage_ts.c
+++ b/arch/mips/au1000/db1x00/mirage_ts.c
@@ -102,15 +102,15 @@
} mirage_ts_cal =
{
#if 0
- xscale: 84,
- xtrans: -157,
- yscale: 66,
- ytrans: -150,
+ .xscale = 84,
+ .xtrans = -157,
+ .yscale = 66,
+ .ytrans = -150,
#else
- xscale: 84,
- xtrans: -150,
- yscale: 66,
- ytrans: -146,
+ .xscale = 84,
+ .xtrans = -150,
+ .yscale = 66,
+ .ytrans = -146,
#endif
};
diff --git a/arch/mips/au1000/hydrogen3/init.c b/arch/mips/au1000/hydrogen3/init.c
index 8cc9879..01ab284 100644
--- a/arch/mips/au1000/hydrogen3/init.c
+++ b/arch/mips/au1000/hydrogen3/init.c
@@ -37,7 +37,6 @@
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 02e7dbc..88f2b6d 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -33,7 +33,6 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index ddcb9d0..f9a0a8b 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -47,6 +47,17 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
+char irq_tab_alchemy[][5] __initdata = {
+ [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 34713c5..e9fa1ba 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -65,5 +65,4 @@
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
- return 0;
}
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
new file mode 100644
index 0000000..22b673c
--- /dev/null
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Alchemy Semiconductor PB1200 board.
+#
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
new file mode 100644
index 0000000..a45b175
--- /dev/null
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -0,0 +1,193 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Alchemy Pb1200/Db1200 board setup.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+#include <linux/ide.h>
+#endif
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_ETH_INT DB1200_ETH_INT
+#define PB1200_IDE_INT DB1200_IDE_INT
+#endif
+
+extern void _board_init_irq(void);
+extern void (*board_init_irq)(void);
+
+void board_reset (void)
+{
+ bcsr->resets = 0;
+ bcsr->system = 0;
+}
+
+void __init board_setup(void)
+{
+ char *argptr = NULL;
+ u32 pin_func;
+
+#if 0
+ /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
+
+ au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_sync();
+#endif
+
+#if defined(CONFIG_I2C_AU1550)
+ {
+ u32 freq0, clksrc;
+
+ /* Select SMBUS in CPLD */
+ bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
+
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(3<<17 | 1<<4);
+ /* Set GPIOs correctly */
+ pin_func |= 2<<17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
+
+ /* The i2c driver depends on 50Mhz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= (3<<SYS_FC_FRDIV1_BIT);
+ /* 396Mhz / (3+1)*2 == 49.5Mhz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~0x01f00000;
+ /* bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= (0x3 << 22);
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1200
+ argptr = prom_getcmdline();
+#ifdef CONFIG_MIPS_PB1200
+ strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#endif
+
+ /* The Pb1200 development board uses external MUX for PSC0 to
+ support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
+#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
+ #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
+ Refer to Pb1200/Db1200 documentation.
+#elif defined( CONFIG_AU1XXX_PSC_SPI )
+ bcsr->resets |= BCSR_RESETS_PCS0MUX;
+ /*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/
+ bcsr->resets =0x900f;
+#elif defined( CONFIG_I2C_AU1550 )
+ bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+#endif
+ au_sync();
+
+#ifdef CONFIG_MIPS_PB1200
+ printk("AMD Alchemy Pb1200 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ printk("AMD Alchemy Db1200 Board\n");
+#endif
+
+ /* Setup Pb1200 External Interrupt Controller */
+ {
+ extern void (*board_init_irq)(void);
+ extern void _board_init_irq(void);
+ board_init_irq = _board_init_irq;
+ }
+}
+
+int
+board_au1200fb_panel (void)
+{
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ int p;
+
+ p = bcsr->switches;
+ p >>= 8;
+ p &= 0x0F;
+ return p;
+}
+
+int
+board_au1200fb_panel_init (void)
+{
+ /* Apply power */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+ /*printk("board_au1200fb_panel_init()\n"); */
+ return 0;
+}
+
+int
+board_au1200fb_panel_shutdown (void)
+{
+ /* Remove power */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+ /*printk("board_au1200fb_panel_shutdown()\n"); */
+ return 0;
+}
+
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
new file mode 100644
index 0000000..27f09e3
--- /dev/null
+++ b/arch/mips/au1000/pb1200/init.c
@@ -0,0 +1,69 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PB1200 board setup
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+ return "Alchemy Pb1200";
+}
+
+void __init prom_init(void)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = (int) fw_arg0;
+ prom_argv = (char **) fw_arg1;
+ prom_envp = (char **) fw_arg2;
+
+ mips_machgroup = MACH_GROUP_ALCHEMY;
+ mips_machtype = MACH_PB1200;
+
+ prom_init_cmdline();
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ memsize = 0x08000000;
+ } else {
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
new file mode 100644
index 0000000..59e70e5
--- /dev/null
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -0,0 +1,182 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Au1xxx irq map table
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+
+/*
+ * Support for External interrupts on the PbAu1200 Development platform.
+ */
+static volatile int pb1200_cascade_en=0;
+
+irqreturn_t pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned short bisr = bcsr->int_status;
+ int extirq_nr = 0;
+
+ /* Clear all the edge interrupts. This has no effect on level */
+ bcsr->int_status = bisr;
+ for( ; bisr; bisr &= (bisr-1) )
+ {
+ extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
+ /* Ack and dispatch IRQ */
+ do_IRQ(extirq_nr,regs);
+ }
+ return IRQ_RETVAL(1);
+}
+
+inline void pb1200_enable_irq(unsigned int irq_nr)
+{
+ bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+inline void pb1200_disable_irq(unsigned int irq_nr)
+{
+ bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+{
+ if (++pb1200_cascade_en == 1)
+ {
+ request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
+#ifdef CONFIG_MIPS_PB1200
+ /* We have a problem with CPLD rev3. Enable a workaround */
+ if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
+ {
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
+ printk("updated to latest revision. This software will not\n");
+ printk("work on anything less than CPLD rev4\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ while(1);
+ }
+#endif
+ }
+ pb1200_enable_irq(irq_nr);
+ return 0;
+}
+
+static void pb1200_shutdown_irq( unsigned int irq_nr )
+{
+ pb1200_disable_irq(irq_nr);
+ if (--pb1200_cascade_en == 0)
+ {
+ free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
+ }
+ return;
+}
+
+static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
+{
+ pb1200_disable_irq( irq_nr );
+}
+
+static void pb1200_end_irq(unsigned int irq_nr)
+{
+ if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+ pb1200_enable_irq(irq_nr);
+ }
+}
+
+static struct hw_interrupt_type external_irq_type =
+{
+#ifdef CONFIG_MIPS_PB1200
+ "Pb1200 Ext",
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ "Db1200 Ext",
+#endif
+ pb1200_startup_irq,
+ pb1200_shutdown_irq,
+ pb1200_enable_irq,
+ pb1200_disable_irq,
+ pb1200_mask_and_ack_irq,
+ pb1200_end_irq,
+ NULL
+};
+
+void _board_init_irq(void)
+{
+ int irq_nr;
+
+ for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
+ {
+ irq_desc[irq_nr].handler = &external_irq_type;
+ pb1200_disable_irq(irq_nr);
+ }
+
+ /* GPIO_7 can not be hooked here, so it is hooked upon first
+ request of any source attached to the cascade */
+}
+
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 476e250..8cb76c2 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -47,6 +47,11 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+};
+
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index 889d494..47c7a1c 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -47,6 +47,11 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+};
+
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index efbeac3..0dc8441 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -33,6 +33,9 @@
$(obj)/elf2ecoff: $(obj)/elf2ecoff.c
$(HOSTCC) -o $@ $^
+vmlinux.bin: $(VMLINUX)
+ $(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin
+
vmlinux.srec: $(VMLINUX)
$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
@@ -45,5 +48,6 @@
clean-files += addinitrd \
elf2ecoff \
+ vmlinux.bin \
vmlinux.ecoff \
vmlinux.srec
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index a5e6554..3b6b757 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,6 +2,6 @@
# Makefile for the Cobalt micro systems family specific parts of the kernel
#
-obj-y := irq.o int-handler.o reset.o setup.o promcon.o
+obj-y := irq.o int-handler.o reset.o setup.o
EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S
index 1a21dec..f92608e 100644
--- a/arch/mips/cobalt/int-handler.S
+++ b/arch/mips/cobalt/int-handler.S
@@ -18,8 +18,8 @@
SAVE_ALL
CLI
- la ra, ret_from_irq
- move a1, sp
+ PTR_LA ra, ret_from_irq
+ move a0, sp
j cobalt_irq
END(cobalt_handle_int)
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index 6d2a815..0d90851 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -10,6 +10,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
#include <asm/i8259.h>
#include <asm/irq_cpu.h>
@@ -25,8 +27,8 @@
* the CPU interrupt lines, and ones that come in on the via chip. The CPU
* mappings are:
*
- * 16, - Software interrupt 0 (unused) IE_SW0
- * 17 - Software interrupt 1 (unused) IE_SW0
+ * 16 - Software interrupt 0 (unused) IE_SW0
+ * 17 - Software interrupt 1 (unused) IE_SW1
* 18 - Galileo chip (timer) IE_IRQ0
* 19 - Tulip 0 + NCR SCSI IE_IRQ1
* 20 - Tulip 1 IE_IRQ2
@@ -42,61 +44,94 @@
* 15 - IDE1
*/
-asmlinkage void cobalt_irq(struct pt_regs *regs)
+static inline void galileo_irq(struct pt_regs *regs)
{
- unsigned int pending = read_c0_status() & read_c0_cause();
+ unsigned int mask, pending, devfn;
- if (pending & CAUSEF_IP2) { /* int 18 */
- unsigned long irq_src = GALILEO_INL(GT_INTRCAUSE_OFS);
+ mask = GALILEO_INL(GT_INTRMASK_OFS);
+ pending = GALILEO_INL(GT_INTRCAUSE_OFS) & mask;
- /* Check for timer irq ... */
- if (irq_src & GALILEO_T0EXP) {
- /* Clear the int line */
- GALILEO_OUTL(0, GT_INTRCAUSE_OFS);
- do_IRQ(COBALT_TIMER_IRQ, regs);
- }
- return;
- }
+ if (pending & GALILEO_INTR_T0EXP) {
- if (pending & CAUSEF_IP6) { /* int 22 */
- int irq = i8259_irq();
+ GALILEO_OUTL(~GALILEO_INTR_T0EXP, GT_INTRCAUSE_OFS);
+ do_IRQ(COBALT_GALILEO_IRQ, regs);
- if (irq >= 0)
- do_IRQ(irq, regs);
- return;
- }
+ } else if (pending & GALILEO_INTR_RETRY_CTR) {
- if (pending & CAUSEF_IP3) { /* int 19 */
- do_IRQ(COBALT_ETH0_IRQ, regs);
- return;
- }
+ devfn = GALILEO_INL(GT_PCI0_CFGADDR_OFS) >> 8;
+ GALILEO_OUTL(~GALILEO_INTR_RETRY_CTR, GT_INTRCAUSE_OFS);
+ printk(KERN_WARNING "Galileo: PCI retry count exceeded (%02x.%u)\n",
+ PCI_SLOT(devfn), PCI_FUNC(devfn));
- if (pending & CAUSEF_IP4) { /* int 20 */
- do_IRQ(COBALT_ETH1_IRQ, regs);
- return;
- }
+ } else {
- if (pending & CAUSEF_IP5) { /* int 21 */
- do_IRQ(COBALT_SERIAL_IRQ, regs);
- return;
- }
-
- if (pending & CAUSEF_IP7) { /* int 23 */
- do_IRQ(COBALT_QUBE_SLOT_IRQ, regs);
- return;
+ GALILEO_OUTL(mask & ~pending, GT_INTRMASK_OFS);
+ printk(KERN_WARNING "Galileo: masking unexpected interrupt %08x\n", pending);
}
}
+static inline void via_pic_irq(struct pt_regs *regs)
+{
+ int irq;
+
+ irq = i8259_irq();
+ if (irq >= 0)
+ do_IRQ(irq, regs);
+}
+
+asmlinkage void cobalt_irq(struct pt_regs *regs)
+{
+ unsigned pending;
+
+ pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP2) /* COBALT_GALILEO_IRQ (18) */
+
+ galileo_irq(regs);
+
+ else if (pending & CAUSEF_IP6) /* COBALT_VIA_IRQ (22) */
+
+ via_pic_irq(regs);
+
+ else if (pending & CAUSEF_IP3) /* COBALT_ETH0_IRQ (19) */
+
+ do_IRQ(COBALT_CPU_IRQ + 3, regs);
+
+ else if (pending & CAUSEF_IP4) /* COBALT_ETH1_IRQ (20) */
+
+ do_IRQ(COBALT_CPU_IRQ + 4, regs);
+
+ else if (pending & CAUSEF_IP5) /* COBALT_SERIAL_IRQ (21) */
+
+ do_IRQ(COBALT_CPU_IRQ + 5, regs);
+
+ else if (pending & CAUSEF_IP7) /* IRQ 23 */
+
+ do_IRQ(COBALT_CPU_IRQ + 7, regs);
+}
+
+static struct irqaction irq_via = {
+ no_action, 0, { { 0, } }, "cascade", NULL, NULL
+};
+
void __init arch_init_irq(void)
{
+ /*
+ * Mask all Galileo interrupts. The Galileo
+ * handler is set in cobalt_timer_setup()
+ */
+ GALILEO_OUTL(0, GT_INTRMASK_OFS);
+
set_except_vector(0, cobalt_handle_int);
init_i8259_irqs(); /* 0 ... 15 */
- mips_cpu_irq_init(16); /* 16 ... 23 */
+ mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */
/*
* Mask all cpu interrupts
* (except IE4, we already masked those at VIA level)
*/
change_c0_status(ST0_IM, IE_IRQ4);
+
+ setup_irq(COBALT_VIA_IRQ, &irq_via);
}
diff --git a/arch/mips/cobalt/promcon.c b/arch/mips/cobalt/promcon.c
deleted file mode 100644
index f03df76..0000000
--- a/arch/mips/cobalt/promcon.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * PROM console for Cobalt Raq2
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997 by Ralf Baechle
- * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv)
- *
- */
-
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/serial_reg.h>
-
-#include <asm/delay.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static unsigned long port = 0xc800000;
-
-static __inline__ void ns16550_cons_put_char(char ch, unsigned long ioaddr)
-{
- char lsr;
-
- do {
- lsr = inb(ioaddr + UART_LSR);
- } while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
- outb(ch, ioaddr + UART_TX);
-}
-
-static __inline__ char ns16550_cons_get_char(unsigned long ioaddr)
-{
- while ((inb(ioaddr + UART_LSR) & UART_LSR_DR) == 0)
- udelay(1);
- return inb(ioaddr + UART_RX);
-}
-
-void ns16550_console_write(struct console *co, const char *s, unsigned count)
-{
- char lsr, ier;
- unsigned i;
-
- ier = inb(port + UART_IER);
- outb(0x00, port + UART_IER);
- for (i=0; i < count; i++, s++) {
-
- if(*s == '\n')
- ns16550_cons_put_char('\r', port);
- ns16550_cons_put_char(*s, port);
- }
-
- do {
- lsr = inb(port + UART_LSR);
- } while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
-
- outb(ier, port + UART_IER);
-}
-
-char getDebugChar(void)
-{
- return ns16550_cons_get_char(port);
-}
-
-void putDebugChar(char kgdb_char)
-{
- ns16550_cons_put_char(kgdb_char, port);
-}
-
-static struct console ns16550_console = {
- .name = "prom",
- .setup = NULL,
- .write = ns16550_console_write,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init ns16550_setup_console(void)
-{
- register_console(&ns16550_console);
-
- return 0;
-}
-
-console_initcall(ns16550_setup_console);
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 084c8e5..805a0e8 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -16,48 +16,45 @@
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
-
-void cobalt_machine_restart(char *command)
-{
- *(volatile char *)0xbc000000 = 0x0f;
-
- /*
- * Ouch, we're still alive ... This time we take the silver bullet ...
- * ... and find that we leave the hardware in a state in which the
- * kernel in the flush locks up somewhen during of after the PCI
- * detection stuff.
- */
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
- __asm__ __volatile__(
- "jr\t%0"
- :
- : "r" (0xbfc00000));
-}
-
-extern int led_state;
-#define kLED 0xBC000000
-#define LEDSet(x) (*(volatile unsigned char *) kLED) = (( unsigned char)x)
+#include <asm/cobalt/cobalt.h>
void cobalt_machine_halt(void)
{
- int mark;
+ int state, last, diff;
+ unsigned long mark;
- /* Blink our cute? little LED (number 3)... */
- while (1) {
- led_state = led_state | ( 1 << 3 );
- LEDSet(led_state);
- mark = jiffies;
- while (jiffies<(mark+HZ));
- led_state = led_state & ~( 1 << 3 );
- LEDSet(led_state);
- mark = jiffies;
- while (jiffies<(mark+HZ));
+ /*
+ * turn off bar on Qube, flash power off LED on RaQ (0.5Hz)
+ *
+ * restart if ENTER and SELECT are pressed
+ */
+
+ last = COBALT_KEY_PORT;
+
+ for (state = 0;;) {
+
+ state ^= COBALT_LED_POWER_OFF;
+ COBALT_LED_PORT = state;
+
+ diff = COBALT_KEY_PORT ^ last;
+ last ^= diff;
+
+ if((diff & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)) && !(~last & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)))
+ COBALT_LED_PORT = COBALT_LED_RESET;
+
+ for (mark = jiffies; jiffies - mark < HZ;)
+ ;
}
}
+void cobalt_machine_restart(char *command)
+{
+ COBALT_LED_PORT = COBALT_LED_RESET;
+
+ /* we should never get here */
+ cobalt_machine_halt();
+}
+
/*
* This triggers the luser mode device driver for the power switch ;-)
*/
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index 6b4737e..d358a11 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -13,6 +13,8 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
@@ -21,6 +23,7 @@
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
+#include <asm/serial.h>
#include <asm/cobalt/cobalt.h>
@@ -30,45 +33,44 @@
int cobalt_board_id;
-static char my_cmdline[CL_SIZE] = {
- "console=ttyS0,115200 "
-#ifdef CONFIG_IP_PNP
- "ip=on "
-#endif
-#ifdef CONFIG_ROOT_NFS
- "root=/dev/nfs "
-#else
- "root=/dev/hda1 "
-#endif
- };
-
const char *get_system_type(void)
{
+ switch (cobalt_board_id) {
+ case COBALT_BRD_ID_QUBE1:
+ return "Cobalt Qube";
+ case COBALT_BRD_ID_RAQ1:
+ return "Cobalt RaQ";
+ case COBALT_BRD_ID_QUBE2:
+ return "Cobalt Qube2";
+ case COBALT_BRD_ID_RAQ2:
+ return "Cobalt RaQ2";
+ }
return "MIPS Cobalt";
}
static void __init cobalt_timer_setup(struct irqaction *irq)
{
- /* Load timer value for 150 Hz */
- GALILEO_OUTL(500000, GT_TC0_OFS);
+ /* Load timer value for 1KHz (TCLK is 50MHz) */
+ GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS);
- /* Register our timer interrupt */
- setup_irq(COBALT_TIMER_IRQ, irq);
+ /* Enable timer */
+ GALILEO_OUTL(GALILEO_ENTC0 | GALILEO_SELTC0, GT_TC_CONTROL_OFS);
- /* Enable timer ints */
- GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);
- /* Unmask timer int */
- GALILEO_OUTL(0x100, GT_INTRMASK_OFS);
+ /* Register interrupt */
+ setup_irq(COBALT_GALILEO_IRQ, irq);
+
+ /* Enable interrupt */
+ GALILEO_OUTL(GALILEO_INTR_T0EXP | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
}
extern struct pci_ops gt64111_pci_ops;
static struct resource cobalt_mem_resource = {
- "GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM
+ "PCI memory", GT64111_MEM_BASE, GT64111_MEM_END, IORESOURCE_MEM
};
static struct resource cobalt_io_resource = {
- "GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO
+ "PCI I/O", 0x1000, 0xffff, IORESOURCE_IO
};
static struct resource cobalt_io_resources[] = {
@@ -86,11 +88,12 @@
.mem_resource = &cobalt_mem_resource,
.mem_offset = 0,
.io_resource = &cobalt_io_resource,
- .io_offset = 0x00001000UL - GT64111_IO_BASE
+ .io_offset = 0 - GT64111_IO_BASE
};
-static void __init cobalt_setup(void)
+void __init plat_setup(void)
{
+ static struct uart_port uart;
unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
int i;
@@ -100,7 +103,10 @@
board_timer_setup = cobalt_timer_setup;
- set_io_port_base(KSEG1ADDR(GT64111_IO_BASE));
+ set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
+
+ /* I/O port resource must include UART and LCD/buttons */
+ ioport_resource.end = 0x0fffffff;
/*
* This is a prom style console. We just poke at the
@@ -120,27 +126,61 @@
cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);
+ printk("Cobalt board ID: %d\n", cobalt_board_id);
+
#ifdef CONFIG_PCI
register_pci_controller(&cobalt_pci_controller);
#endif
-}
-early_initcall(cobalt_setup);
+#ifdef CONFIG_SERIAL_8250
+ if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
+
+ uart.line = 0;
+ uart.type = PORT_UNKNOWN;
+ uart.uartclk = 18432000;
+ uart.irq = COBALT_SERIAL_IRQ;
+ uart.flags = STD_COM_FLAGS;
+ uart.iobase = 0xc800000;
+ uart.iotype = UPIO_PORT;
+
+ early_serial_setup(&uart);
+ }
+#endif
+}
/*
* Prom init. We read our one and only communication with the firmware.
- * Grab the amount of installed memory
+ * Grab the amount of installed memory.
+ * Better boot loaders (CoLo) pass a command line too :-)
*/
void __init prom_init(void)
{
- int argc = fw_arg0;
-
- strcpy(arcs_cmdline, my_cmdline);
+ int narg, indx, posn, nchr;
+ unsigned long memsz;
+ char **argv;
mips_machgroup = MACH_GROUP_COBALT;
- add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);
+ memsz = fw_arg0 & 0x7fff0000;
+ narg = fw_arg0 & 0x0000ffff;
+
+ if (narg) {
+ arcs_cmdline[0] = '\0';
+ argv = (char **) fw_arg1;
+ posn = 0;
+ for (indx = 1; indx < narg; ++indx) {
+ nchr = strlen(argv[indx]);
+ if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
+ break;
+ if (posn)
+ arcs_cmdline[posn++] = ' ';
+ strcpy(arcs_cmdline + posn, argv[indx]);
+ posn += nchr;
+ }
+ }
+
+ add_memory_region(0x0, memsz, BOOT_MEM_RAM);
}
unsigned long __init prom_free_prom_memory(void)
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 3120a02..132ec3d 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:13 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,42 +59,72 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
CONFIG_MIPS_ATLAS=y
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_BONITO64=y
CONFIG_MIPS_MSC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_BOARDS_GEN=y
CONFIG_MIPS_GT64120=y
CONFIG_SWAP_IO_SPACE=y
@@ -101,8 +134,10 @@
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -118,15 +153,46 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -135,7 +201,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -144,10 +209,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -160,6 +221,305 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_NET_DIVERT=y
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -171,6 +531,11 @@
CONFIG_FW_LOADER=y
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -187,7 +552,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -201,7 +565,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -247,6 +610,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -259,6 +623,7 @@
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -273,6 +638,7 @@
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -288,12 +654,8 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -303,7 +665,6 @@
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -312,6 +673,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -335,11 +698,15 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -352,284 +719,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -637,6 +733,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -681,13 +792,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -700,6 +815,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -712,6 +829,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -741,19 +860,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -766,6 +872,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -786,6 +903,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -812,6 +930,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -822,10 +945,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -845,7 +978,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -855,13 +987,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -879,10 +1007,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -903,12 +1036,14 @@
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
@@ -916,6 +1051,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -943,12 +1079,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -974,16 +1108,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -992,6 +1129,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1051,7 +1189,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -1073,6 +1213,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -1097,9 +1238,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
new file mode 100644
index 0000000..25e8a08
--- /dev/null
+++ b/arch/mips/configs/bigsur_defconfig
@@ -0,0 +1,881 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:17 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+CONFIG_SIBYTE_BIGSUR=y
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_SIBYTE_BCM1x80=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_CPU_SB1_PASS_1 is not set
+# CONFIG_CPU_SB1_PASS_2_1250 is not set
+# CONFIG_CPU_SB1_PASS_2_2 is not set
+# CONFIG_CPU_SB1_PASS_4 is not set
+# CONFIG_CPU_SB1_PASS_2_112x is not set
+# CONFIG_CPU_SB1_PASS_3 is not set
+# CONFIG_SIMULATION is not set
+# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_CONFIG_SB1_CERR_STALL is not set
+CONFIG_SIBYTE_CFE=y
+# CONFIG_SIBYTE_CFE_CONSOLE is not set
+# CONFIG_SIBYTE_BUS_WATCHER is not set
+# CONFIG_SIBYTE_SB1250_PROF is not set
+# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_SIBYTE_DMA_PAGEOPS is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_DEBUG=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BUILD_ELF64=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=y
+CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDE_SWARM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SIBYTE_SB1250_DUART=y
+CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGO_SIBYTE=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+CONFIG_I2C_SIBYTE=y
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+CONFIG_SENSORS_DS1374=y
+CONFIG_SENSORS_EEPROM=y
+CONFIG_SENSORS_PCF8574=y
+CONFIG_SENSORS_PCA9539=y
+CONFIG_SENSORS_PCF8591=y
+CONFIG_SENSORS_RTC8564=y
+CONFIG_SENSORS_MAX6875=y
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_SB1XXX_CORELIS is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_TEA=m
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 158e716..bfbaa08 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:20 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,57 +59,86 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-CONFIG_ZAO_CAPCELLA=y
-CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+CONFIG_ZAO_CAPCELLA=y
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -122,12 +154,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -136,7 +192,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -145,10 +200,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -161,6 +212,81 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -169,7 +295,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -188,7 +319,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -199,11 +329,8 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -244,6 +371,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -254,6 +382,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -266,79 +395,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -346,10 +409,25 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
@@ -359,7 +437,30 @@
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
#
# Ethernet (1000 Mbit)
@@ -371,12 +472,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -389,6 +495,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -400,6 +508,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -419,29 +529,13 @@
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -451,6 +545,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -461,16 +561,16 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -483,19 +583,7 @@
#
# Watchdog Cards
#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
+# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
@@ -506,9 +594,15 @@
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -519,10 +613,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -542,7 +646,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -552,13 +655,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -576,21 +675,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -611,12 +718,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -648,6 +753,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -656,6 +762,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -676,9 +783,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
#
# Security options
@@ -690,7 +799,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -700,7 +833,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 4302c6f..4b4d1dd 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:23 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,41 +53,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_GT64111=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -92,8 +123,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -109,14 +142,38 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -125,7 +182,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -134,10 +190,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -150,6 +202,77 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -161,6 +284,11 @@
CONFIG_FW_LOADER=y
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -177,7 +305,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -189,7 +316,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -234,6 +360,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -244,6 +371,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -256,75 +384,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -332,6 +398,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -357,12 +438,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -375,6 +460,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -386,6 +473,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -415,19 +504,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -437,6 +513,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -457,6 +544,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -483,6 +571,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -493,10 +586,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -516,7 +619,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -526,13 +628,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -550,12 +648,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
@@ -565,10 +668,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -589,12 +694,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -622,7 +725,7 @@
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -631,6 +734,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -651,7 +755,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -665,7 +771,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -675,7 +805,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 962fc14..6501144 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:26 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,79 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+CONFIG_MIPS_DB1000=y
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-CONFIG_SOC_AU1000=y
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-CONFIG_MIPS_DB1000=y
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1000=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +147,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -152,6 +195,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
@@ -169,6 +214,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -179,12 +318,86 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -198,14 +411,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -228,6 +439,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -238,6 +450,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -248,94 +461,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -389,6 +536,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -418,18 +567,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -439,6 +576,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -473,14 +620,14 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -489,6 +636,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -499,10 +650,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -522,7 +683,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -532,12 +692,9 @@
#
# USB support
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -552,7 +709,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -561,6 +721,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -579,10 +740,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -603,13 +766,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -621,6 +781,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -641,6 +803,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -650,6 +813,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -709,7 +873,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -725,26 +891,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -756,9 +923,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 6a528d4..b8cd2cd 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:29 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,79 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+CONFIG_MIPS_DB1100=y
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-CONFIG_SOC_AU1100=y
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-CONFIG_MIPS_DB1100=y
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +147,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -147,15 +190,7 @@
#
# PCCARD (PCMCIA/CardBus) support
#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
-# CONFIG_PCMCIA_AU1X00 is not set
+# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
@@ -167,6 +202,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -180,9 +309,83 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -196,14 +399,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -226,6 +427,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -236,6 +438,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -246,101 +449,35 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_MIPS_AU1X00_ENET=y
#
# Ethernet (1000 Mbit)
@@ -360,19 +497,6 @@
# CONFIG_NET_RADIO is not set
#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
# Wan interfaces
#
# CONFIG_WAN is not set
@@ -387,6 +511,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -416,18 +542,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -437,6 +551,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=m
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -454,7 +578,10 @@
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_AU1X00=y
+CONFIG_SERIAL_AU1X00_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -468,20 +595,19 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
#
-# PCMCIA character devices
+# TPM devices
#
-CONFIG_SYNCLINK_CS=m
-# CONFIG_RAW_DRIVER is not set
#
# I2C support
@@ -494,10 +620,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -510,13 +646,43 @@
#
# Graphics support
#
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_AU1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -527,12 +693,9 @@
#
# USB support
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -547,7 +710,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -556,6 +722,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -574,10 +741,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -598,13 +767,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -616,6 +782,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -636,6 +804,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -645,6 +814,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -704,7 +874,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -720,26 +892,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -751,9 +924,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
new file mode 100644
index 0000000..530b6c2
--- /dev/null
+++ b/arch/mips/configs/db1200_defconfig
@@ -0,0 +1,987 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:32 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+CONFIG_MIPS_DB1200=y
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_AU1X00=m
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
+# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
+# CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON is not set
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_MIPS_AU1X00_ENET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_AU1X00_GPIO is not set
+# CONFIG_TS_AU1X00_ADS7846 is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AU1X00=y
+CONFIG_SERIAL_AU1X00_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_AU1200=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AU1X=y
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+CONFIG_JFS_FS=y
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="mem=48M"
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index fed6f2f..1c2784d 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:36 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,81 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+CONFIG_MIPS_DB1500=y
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-CONFIG_SOC_AU1500=y
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-CONFIG_MIPS_DB1500=y
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +149,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -145,7 +190,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -154,6 +198,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -176,6 +222,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -186,15 +326,20 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -232,16 +377,14 @@
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_DB1X00=y
-CONFIG_MTD_DB1X00_BOOT=y
-CONFIG_MTD_DB1X00_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -277,7 +420,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -290,7 +432,6 @@
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -336,6 +477,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -346,6 +488,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -358,94 +501,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -453,6 +515,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -479,12 +556,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -497,6 +578,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -520,6 +603,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -549,19 +634,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -571,6 +643,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -590,6 +673,7 @@
CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -603,7 +687,8 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -620,6 +705,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -630,10 +720,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -647,7 +747,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -680,7 +779,6 @@
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
@@ -689,6 +787,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -699,23 +799,23 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
@@ -733,12 +833,17 @@
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+CONFIG_USB_YEALINK=m
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -762,6 +867,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -786,9 +892,10 @@
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_LD=m
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -807,12 +914,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -831,10 +943,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -855,13 +969,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -895,6 +1006,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -904,6 +1016,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -963,7 +1076,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -979,26 +1094,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -1010,9 +1126,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 178c0ad..64248e2 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:39 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,80 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+CONFIG_MIPS_DB1550=y
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-CONFIG_SOC_AU1550=y
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-CONFIG_MIPS_DB1550=y
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -145,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -154,6 +197,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -176,6 +221,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -186,15 +325,20 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -238,9 +382,8 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_DB1550=y
-CONFIG_MTD_DB1550_BOOT=y
-CONFIG_MTD_DB1550_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -281,7 +424,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -293,7 +435,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -350,6 +491,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -367,6 +509,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -377,6 +520,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -389,94 +533,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -484,6 +547,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -510,12 +588,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -528,6 +610,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -559,6 +643,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -588,19 +674,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -610,6 +683,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -629,6 +713,7 @@
CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -660,6 +745,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -670,10 +760,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -687,7 +787,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -697,13 +796,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -721,12 +816,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -745,10 +845,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -769,13 +871,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -809,6 +908,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -818,6 +918,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -877,7 +978,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -893,26 +996,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -924,9 +1028,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig
index 70addc7..b260e51 100644
--- a/arch/mips/configs/ddb5476_defconfig
+++ b/arch/mips/configs/ddb5476_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:42 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,41 +53,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
CONFIG_DDB5476=y
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DDB5XXX_COMMON=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,8 +124,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -110,14 +143,38 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -126,7 +183,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_MMU=y
@@ -136,11 +192,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -153,6 +204,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -161,7 +286,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -181,8 +311,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -193,7 +321,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -239,6 +366,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -254,6 +382,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -266,78 +395,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -345,6 +409,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -352,7 +431,6 @@
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
@@ -377,12 +455,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -395,6 +477,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -406,6 +490,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -435,19 +521,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -457,6 +530,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -477,6 +561,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -503,6 +588,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -513,10 +603,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -530,6 +630,11 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -537,6 +642,7 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -549,8 +655,11 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -575,13 +684,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -599,21 +704,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -634,12 +747,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -668,7 +779,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -677,6 +788,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -697,7 +809,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="ip=any"
@@ -711,7 +825,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -721,7 +859,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index 6029280..c2a01df 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:45 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,42 +53,70 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
CONFIG_DDB5477=y
-CONFIG_DDB5477_BUS_FREQUENCY=0
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_DDB5477_BUS_FREQUENCY=0
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DDB5XXX_COMMON=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,8 +124,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -110,14 +143,38 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -126,7 +183,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -135,10 +191,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -151,6 +203,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -159,7 +285,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -178,7 +309,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -189,7 +319,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -212,6 +341,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -222,6 +352,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -234,78 +365,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -313,6 +379,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -357,13 +438,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -376,6 +461,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -387,6 +474,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -416,19 +505,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -438,6 +514,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -458,6 +545,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -484,6 +572,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -494,10 +587,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -517,7 +620,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -527,13 +629,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -551,21 +649,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -586,12 +692,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -623,6 +727,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -631,6 +736,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -651,7 +757,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="ip=any"
@@ -665,7 +773,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -675,7 +807,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 66ec1f4..5bc885b 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:48 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -49,48 +53,76 @@
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=4
@@ -98,8 +130,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_R3000=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -115,12 +149,37 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R3000=y
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_WB=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -135,10 +194,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -150,6 +205,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -159,6 +288,12 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -177,17 +312,14 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -196,7 +328,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -206,6 +338,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -213,10 +346,12 @@
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
+CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -228,9 +363,10 @@
#
# SCSI Transport Attributes
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -248,6 +384,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -258,78 +395,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -363,6 +450,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -377,48 +466,22 @@
#
# Input device support
#
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_SERIAL_DEC=y
+CONFIG_SERIAL_DEC_CONSOLE=y
+CONFIG_ZS=y
#
# Serial drivers
@@ -445,18 +508,20 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
+CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -467,10 +532,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -483,13 +558,29 @@
#
# Graphics support
#
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_PMAG_AA is not set
+CONFIG_FB_PMAG_BA=y
+CONFIG_FB_PMAGB_B=y
+# CONFIG_FB_MAXINE is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
#
-# Console display driver support
+# Logo configuration
#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DEC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -504,10 +595,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -520,7 +607,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -529,6 +619,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
@@ -538,10 +629,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -562,12 +655,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -584,19 +675,31 @@
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=y
+CONFIG_UFS_FS_WRITE=y
#
# Network File Systems
#
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -631,9 +734,24 @@
#
# Kernel hacking
#
-# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
#
# Security options
@@ -645,7 +763,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -655,7 +797,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index ba2ec01..c0d06ea 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:51 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,56 +59,84 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-CONFIG_CASIO_E55=y
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_VRC4171 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+CONFIG_CASIO_E55=y
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -121,12 +152,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -141,11 +196,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
# PCI Hotplug Support
#
@@ -157,6 +207,78 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -168,6 +290,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -185,18 +312,13 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -205,7 +327,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -237,6 +359,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -252,6 +375,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -262,76 +386,13 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -339,12 +400,26 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
@@ -380,6 +455,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -401,26 +478,14 @@
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -430,6 +495,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -440,16 +515,15 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -484,10 +558,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -498,10 +576,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -522,7 +610,6 @@
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -536,10 +623,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -552,24 +635,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -590,12 +680,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -617,16 +705,17 @@
#
# Network File Systems
#
-CONFIG_NFS_FS=y
+CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
+CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
+CONFIG_LOCKD=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -634,6 +723,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -654,9 +744,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M"
#
# Security options
@@ -668,7 +760,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -678,7 +794,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig
index 17e87f7..f1309d8 100644
--- a/arch/mips/configs/ev64120_defconfig
+++ b/arch/mips/configs/ev64120_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:54 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,41 +59,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
CONFIG_MIPS_EV64120=y
-# CONFIG_EVB_PCI1 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_EVB_PCI1 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_MIPS_GT64120=y
# CONFIG_SYSCLK_75 is not set
# CONFIG_SYSCLK_83 is not set
@@ -100,8 +131,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -117,15 +150,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -134,7 +191,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -143,10 +199,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -159,6 +211,79 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -167,7 +292,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -186,7 +316,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -197,7 +326,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -220,6 +348,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -230,6 +359,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -242,77 +372,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -320,6 +386,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -345,12 +426,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -363,6 +448,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -381,6 +468,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -410,19 +499,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -432,6 +508,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -452,6 +539,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -478,6 +566,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -488,10 +581,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -511,7 +614,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -521,13 +623,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -545,21 +643,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -580,12 +686,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -614,7 +718,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -623,6 +727,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -643,7 +748,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::"
@@ -657,7 +764,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -667,7 +798,8 @@
# Library routines
#
CONFIG_CRC_CCITT=y
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig
index 9da4140..8ac55b7 100644
--- a/arch/mips/configs/ev96100_defconfig
+++ b/arch/mips/configs/ev96100_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:57 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,40 +59,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_MIPS_EV96100=y
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_GT64120=y
CONFIG_SWAP_IO_SPACE=y
@@ -99,8 +130,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -116,6 +149,18 @@
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -123,11 +168,25 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -143,10 +202,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -158,6 +213,79 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -169,6 +297,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -185,13 +318,11 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -214,6 +345,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -224,6 +356,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -234,77 +367,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -338,6 +422,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -367,18 +453,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -388,6 +462,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -429,10 +513,13 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -443,10 +530,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -466,7 +563,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -480,10 +576,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -496,24 +588,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -534,12 +633,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -568,7 +665,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -577,6 +674,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -597,7 +695,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -611,7 +711,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -621,7 +745,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 17fa5c4..3ae3838 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:01 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,25 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,41 +60,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
CONFIG_SGI_IP22=y
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_ARC32=y
@@ -103,8 +134,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -120,22 +153,48 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_IP22_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
+CONFIG_HW_HAS_EISA=y
# CONFIG_EISA is not set
CONFIG_MMU=y
@@ -145,10 +204,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -160,115 +215,7 @@
CONFIG_TRAD_SIGNALS=y
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -277,12 +224,14 @@
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
@@ -296,8 +245,10 @@
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -341,6 +292,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
#
# IP: Netfilter Configuration
@@ -348,11 +302,15 @@
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -376,9 +334,12 @@
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -395,12 +356,14 @@
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -410,7 +373,7 @@
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -429,11 +392,16 @@
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -456,10 +424,6 @@
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
@@ -479,6 +443,7 @@
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
@@ -489,6 +454,7 @@
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
@@ -496,17 +462,153 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-CONFIG_ETHERTAP=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -540,6 +642,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -569,18 +673,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -598,6 +690,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -644,11 +746,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -659,10 +764,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -693,7 +808,6 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -707,10 +821,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -723,13 +833,17 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -741,12 +855,14 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
@@ -754,6 +870,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -781,12 +898,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -811,15 +926,20 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -835,6 +955,7 @@
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -908,7 +1029,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -931,6 +1054,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -942,10 +1066,10 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -955,9 +1079,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index b2a67da..d962f61 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,11 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:04 2005
#
CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
#
# Code maturity level options
@@ -13,25 +11,31 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +45,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,55 +62,85 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
CONFIG_SGI_IP27=y
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SGI_SN0_N_MODE is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_NUMA=y
# CONFIG_MAPPED_KERNEL is not set
# CONFIG_REPLICATE_KTEXT is not set
# CONFIG_REPLICATE_EXHANDLERS is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_IP27=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_MIPS_L1_CACHE_SHIFT=7
CONFIG_ARC64=y
CONFIG_BOOT_ELF64=y
-CONFIG_QL_ISP_A64=y
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -121,17 +156,42 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R10000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=64
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
# CONFIG_MIPS_INSANE_LARGE is not set
#
@@ -141,7 +201,6 @@
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -150,10 +209,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -163,7 +218,7 @@
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
+CONFIG_BUILD_ELF64=y
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
@@ -171,6 +226,111 @@
CONFIG_BINFMT_ELF32=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_CLK_JIFFIES is not set
+CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -179,7 +339,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -198,7 +363,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -210,7 +374,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -232,6 +395,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -241,8 +405,10 @@
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -256,7 +422,8 @@
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -271,26 +438,24 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_ISP=y
# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLOGIC_1280_1040=y
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -313,11 +478,15 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -330,107 +499,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -438,13 +513,25 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_SGI_IOC3_ETH=y
-CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
-CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
@@ -466,12 +553,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -484,6 +575,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -496,6 +589,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -513,25 +608,15 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -549,7 +634,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -557,6 +641,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -584,6 +669,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -594,10 +684,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -611,7 +711,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -621,13 +720,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -645,12 +740,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -662,17 +762,19 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -693,12 +795,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -722,13 +822,14 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -738,6 +839,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -772,7 +874,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -788,28 +892,29 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -819,9 +924,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index b26e117..bf8fb95 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,11 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:07 2005
#
CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
#
# Code maturity level options
@@ -13,11 +11,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -25,13 +25,16 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,42 +54,71 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_IP32=y
-CONFIG_OWN_DMA=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_OWN_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -95,8 +128,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -112,6 +147,17 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -119,9 +165,22 @@
CONFIG_BOARD_SCACHE=y
CONFIG_R5000_CPU_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
@@ -130,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -139,10 +197,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -160,6 +214,80 @@
CONFIG_BINFMT_ELF32=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -168,7 +296,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -187,7 +320,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -199,7 +331,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -221,6 +352,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -233,6 +365,7 @@
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -244,9 +377,10 @@
#
# SCSI Transport Attributes
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
#
# SCSI low-level drivers
@@ -266,18 +400,13 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -286,6 +415,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -299,6 +430,8 @@
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -311,78 +444,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -390,6 +458,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -416,12 +499,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -434,6 +521,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -446,6 +535,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -475,20 +566,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_MACEPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -498,6 +575,18 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_MACEPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -518,6 +607,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -544,6 +634,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -554,10 +649,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -577,7 +682,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -587,13 +691,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -611,21 +711,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -646,13 +754,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -676,13 +781,14 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -691,6 +797,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -721,7 +828,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -735,7 +844,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -745,7 +878,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig
index 08bd3ad..0940771 100644
--- a/arch/mips/configs/it8172_defconfig
+++ b/arch/mips/configs/it8172_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:09 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,11 +11,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -26,13 +25,16 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,41 +60,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
CONFIG_MIPS_ITE8172=y
-# CONFIG_IT8172_REVC is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_IT8172_REVC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_ITE_BOARD_GEN=y
CONFIG_IT8172_CIR=y
CONFIG_IT8712=y
@@ -100,8 +131,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -117,14 +150,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -140,10 +198,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -155,6 +209,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -166,12 +294,17 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
@@ -207,7 +340,6 @@
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
@@ -217,6 +349,7 @@
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x2000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -251,14 +384,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -302,6 +433,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -312,6 +444,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -322,78 +455,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -426,6 +509,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -455,18 +540,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -476,6 +549,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -521,10 +604,13 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -535,10 +621,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -558,7 +654,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -574,15 +669,9 @@
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
CONFIG_SOUND_IT8172=y
-# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_AD1980 is not set
#
@@ -592,10 +681,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -608,24 +693,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -646,12 +738,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -682,7 +772,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -691,6 +781,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -711,7 +802,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -725,7 +818,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -735,7 +852,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig
index 583ef5c..9ba61dfc 100644
--- a/arch/mips/configs/ivr_defconfig
+++ b/arch/mips/configs/ivr_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:12 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,11 +11,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -26,13 +25,16 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,40 +60,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
CONFIG_MIPS_IVR=y
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_ITE_BOARD_GEN=y
CONFIG_IT8172_CIR=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -98,8 +129,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -115,14 +148,38 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -131,7 +188,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -140,10 +196,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -156,6 +208,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -164,7 +290,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -183,7 +314,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -194,7 +324,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -239,6 +368,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -249,6 +379,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -261,78 +392,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -340,6 +406,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -365,12 +446,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -383,6 +468,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -394,6 +481,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -423,19 +512,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -445,6 +521,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -467,6 +554,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -492,6 +580,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -502,10 +595,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -525,7 +628,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -535,13 +637,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -559,21 +657,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -594,12 +700,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -628,7 +732,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -637,6 +741,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -657,7 +762,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -671,7 +778,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -681,7 +812,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
index 8abb5a0..21b2b80 100644
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ b/arch/mips/configs/jaguar-atx_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:14 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -54,36 +57,70 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
CONFIG_MOMENCO_JAGUAR_ATX=y
-CONFIG_JAGUAR_DMALOW=y
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_JAGUAR_DMALOW=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_LIMITED_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_IRQ_MV64340=y
@@ -95,8 +132,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -112,6 +151,17 @@
# CONFIG_CPU_RM7000 is not set
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -119,13 +169,24 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -134,7 +195,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -143,10 +203,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -158,6 +214,68 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -166,7 +284,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -185,7 +308,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -195,7 +317,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -218,6 +339,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -228,6 +350,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -240,58 +363,8 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -304,6 +377,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -343,9 +431,11 @@
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
CONFIG_MV643XX_ETH=y
CONFIG_MV643XX_ETH_0=y
CONFIG_MV643XX_ETH_1=y
@@ -354,6 +444,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -366,6 +457,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -374,6 +467,8 @@
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -391,20 +486,10 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -425,6 +510,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -451,6 +537,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -461,10 +551,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -478,7 +578,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -488,13 +587,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -512,6 +607,10 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -519,13 +618,16 @@
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -546,10 +648,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -570,7 +672,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
@@ -591,7 +693,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -605,7 +709,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -615,7 +743,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index da5d9ee..9a728c2 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:06 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:17 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,40 +53,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_TOSHIBA_JMR3927=y
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+CONFIG_TOSHIBA_JMR3927=y
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_MIPS_TX3927=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -92,8 +123,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
CONFIG_CPU_TX39XX=y
# CONFIG_CPU_VR41XX is not set
@@ -109,12 +142,34 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX39XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RTC_DS1742=y
@@ -124,7 +179,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -133,10 +187,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -149,6 +199,80 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -157,7 +281,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -176,7 +305,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -187,7 +315,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -210,6 +337,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -220,6 +348,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -232,78 +361,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -311,6 +375,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -336,12 +415,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -354,6 +437,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -365,6 +450,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -394,19 +481,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -416,6 +490,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -426,11 +511,9 @@
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
@@ -438,10 +521,6 @@
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
-# CONFIG_SERIAL_TX3912 is not set
-CONFIG_TXX927_SERIAL=y
-CONFIG_TXX927_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_TXX9 is not set
#
# Serial drivers
@@ -451,6 +530,8 @@
#
# Non-8250 serial port support
#
+CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_JSM is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -477,6 +558,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -487,10 +573,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -504,6 +600,11 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -511,6 +612,7 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -523,8 +625,11 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -548,13 +653,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -572,6 +673,10 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -579,13 +684,16 @@
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -606,10 +714,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -638,7 +746,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -647,6 +755,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -667,7 +776,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -681,7 +792,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -691,7 +826,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index 8d600ae..03cd0ca 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:06 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:19 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,53 +59,83 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
CONFIG_LASAT=y
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_PICVUE=y
CONFIG_PICVUE_PROC=y
CONFIG_DS1603=y
CONFIG_LASAT_SYSCTL=y
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_NILE4=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_MIPS_GT64120=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -118,17 +151,41 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_R5000_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -137,7 +194,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
CONFIG_MMU=y
#
@@ -146,10 +202,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +214,76 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -170,15 +292,20 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -223,6 +350,7 @@
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_LASAT=y
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -258,7 +386,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -269,7 +396,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -326,6 +452,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -343,6 +470,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -353,6 +481,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -365,68 +494,8 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -439,6 +508,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -464,12 +548,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -482,6 +570,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -493,6 +583,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -522,19 +614,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -544,6 +623,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -564,6 +654,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -590,6 +681,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -600,10 +696,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -623,7 +729,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -633,13 +738,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -657,10 +758,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -670,13 +776,16 @@
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -697,12 +806,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -728,12 +835,13 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -742,6 +850,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -762,7 +871,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -776,7 +887,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -786,7 +921,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 79519ac..2acdec9 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:53:14 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:22 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,44 +59,75 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
CONFIG_MIPS_MALTA=y
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_I8259=y
CONFIG_MIPS_BONITO64=y
CONFIG_MIPS_MSC=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_BOARDS_GEN=y
CONFIG_MIPS_GT64120=y
CONFIG_SWAP_IO_SPACE=y
@@ -104,8 +138,10 @@
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -121,14 +157,48 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_MIPS_VPE_APSP_API=y
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -137,7 +207,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -146,10 +215,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +227,305 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_NET_DIVERT=y
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -173,6 +537,11 @@
CONFIG_FW_LOADER=y
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -203,7 +572,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -261,6 +629,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -278,6 +647,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
@@ -290,6 +660,7 @@
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -304,6 +675,7 @@
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -324,18 +696,13 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
@@ -344,6 +711,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -367,11 +736,15 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -384,284 +757,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -669,6 +771,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -713,13 +830,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -732,6 +853,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -744,6 +867,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -773,19 +898,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -795,6 +907,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -815,6 +938,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -840,6 +964,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -850,10 +979,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -873,7 +1012,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -883,13 +1021,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -907,10 +1041,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -931,12 +1070,14 @@
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
@@ -944,6 +1085,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -971,12 +1113,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -1002,16 +1142,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1020,6 +1163,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1079,7 +1223,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -1101,6 +1247,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -1125,9 +1272,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
new file mode 100644
index 0000000..fb9bdd9
--- /dev/null
+++ b/arch/mips/configs/mipssim_defconfig
@@ -0,0 +1,775 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:25 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+CONFIG_MIPS_SIM=y
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_MIPS_VPE_APSP_API=y
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_NET_DIVERT=y
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_POLICE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_MIPS_SIM_NET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 0fea57e..e2c0821 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:28 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,57 +59,86 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-CONFIG_VICTOR_MPC30X=y
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+CONFIG_VICTOR_MPC30X=y
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+CONFIG_VRC4173=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -122,12 +154,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -136,17 +192,26 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_VRC4173=y
#
# PCI Hotplug Support
@@ -161,6 +226,78 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -169,7 +306,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -188,7 +330,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -197,13 +338,11 @@
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -217,11 +356,35 @@
#
# ATA/ATAPI/MFM/RLL support
#
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -232,6 +395,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -244,79 +408,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -324,20 +422,14 @@
# CONFIG_ARCNET is not set
#
-# Ethernet (10 or 100Mbit)
+# PHY device support
#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
#
-# Tulip family network device support
+# Ethernet (10 or 100Mbit)
#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=m
#
# Ethernet (1000 Mbit)
@@ -349,12 +441,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -366,7 +462,59 @@
#
# Wireless LAN (non-hamradio)
#
-# CONFIG_NET_RADIO is not set
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
@@ -378,6 +526,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -407,19 +557,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -429,6 +566,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -439,16 +587,16 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -472,9 +620,20 @@
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -485,10 +644,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -508,7 +677,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -518,13 +686,120 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -542,21 +817,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -577,12 +860,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -609,9 +890,8 @@
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -620,6 +900,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -640,9 +921,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,19200"
#
# Security options
@@ -656,26 +939,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -687,9 +971,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index b4cf97a..ffb23fc 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:30 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,25 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,40 +60,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-CONFIG_MOMENCO_OCELOT_3=y
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+CONFIG_MOMENCO_OCELOT_3=y
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_IRQ_MV64340=y
@@ -102,8 +133,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -119,6 +152,17 @@
# CONFIG_CPU_RM7000 is not set
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -126,13 +170,26 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -141,7 +198,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -150,10 +206,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -166,6 +218,110 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -174,7 +330,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -193,7 +354,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -205,7 +365,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -226,6 +385,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
@@ -237,6 +397,7 @@
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -251,6 +412,7 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -266,18 +428,13 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
@@ -286,6 +443,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -300,6 +459,8 @@
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -312,105 +473,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -418,6 +487,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -440,7 +524,6 @@
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -463,9 +546,12 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
CONFIG_MV643XX_ETH=y
CONFIG_MV643XX_ETH_0=y
CONFIG_MV643XX_ETH_1=y
@@ -474,6 +560,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -486,6 +573,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -505,6 +594,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -531,19 +622,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -553,6 +631,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -573,6 +662,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -598,6 +688,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -608,10 +703,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -625,6 +730,11 @@
# Graphics support
#
CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -632,6 +742,7 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -644,8 +755,11 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -675,13 +789,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -699,10 +809,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -715,17 +830,21 @@
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -746,15 +865,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -778,16 +892,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -797,6 +914,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -856,7 +974,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="ip=any root=nfs"
@@ -869,7 +989,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -879,9 +1023,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
index a38903d..d3a5fee 100644
--- a/arch/mips/configs/ocelot_c_defconfig
+++ b/arch/mips/configs/ocelot_c_defconfig
@@ -1,11 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:33 2005
#
CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
#
# Code maturity level options
@@ -13,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -40,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -49,39 +53,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-CONFIG_MOMENCO_OCELOT_C=y
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+CONFIG_MOMENCO_OCELOT_C=y
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_MV64340=y
CONFIG_PCI_MARVELL=y
@@ -91,8 +124,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -108,6 +143,17 @@
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -115,9 +161,23 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -126,7 +186,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -135,10 +194,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -156,6 +211,79 @@
CONFIG_BINFMT_ELF32=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -164,7 +292,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -183,7 +316,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -194,7 +326,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -216,6 +347,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -226,6 +358,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -238,77 +371,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -316,6 +385,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -341,13 +425,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -360,6 +448,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -371,6 +461,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -400,19 +492,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -422,6 +501,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -442,6 +532,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -468,6 +559,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -478,10 +574,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -501,7 +607,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -511,13 +616,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -535,21 +636,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -570,12 +679,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -607,6 +714,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -615,6 +723,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -635,7 +744,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -649,7 +760,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -659,7 +794,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index 920d59b..1edde12 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:35 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -50,40 +53,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-CONFIG_MOMENCO_OCELOT=y
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+CONFIG_MOMENCO_OCELOT=y
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_MIPS_GT64120=y
@@ -96,8 +127,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -113,6 +146,17 @@
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -120,11 +164,25 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -140,10 +198,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -155,6 +209,79 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -166,6 +293,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -182,13 +314,11 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -211,6 +341,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -221,6 +352,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -231,77 +363,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
#
# Ethernet (10 or 100Mbit)
@@ -334,6 +417,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -363,18 +448,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -384,6 +457,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -425,10 +508,13 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -439,10 +525,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -462,7 +558,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -476,10 +571,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -492,24 +583,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -530,12 +628,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -567,6 +663,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -575,6 +672,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -595,7 +693,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -609,7 +709,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -619,7 +743,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig
index ef5ea50..e2d5188 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/ocelot_g_defconfig
@@ -1,11 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:38 2005
#
CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
#
# Code maturity level options
@@ -13,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -40,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -49,39 +53,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-CONFIG_MOMENCO_OCELOT_G=y
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+CONFIG_MOMENCO_OCELOT_G=y
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_PCI_MARVELL=y
@@ -94,8 +127,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -111,6 +146,17 @@
CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
@@ -118,9 +164,23 @@
CONFIG_BOARD_SCACHE=y
CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -129,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -138,10 +197,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -159,6 +214,79 @@
CONFIG_BINFMT_ELF32=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
# Device Drivers
#
@@ -167,7 +295,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
@@ -186,7 +319,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -197,7 +329,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -219,6 +350,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -229,6 +361,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -241,77 +374,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -319,6 +388,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -345,12 +429,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -363,6 +451,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
#
# Wan interfaces
@@ -374,6 +464,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -403,19 +495,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -425,6 +504,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -445,6 +535,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -471,6 +562,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -481,10 +577,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -504,7 +610,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -514,13 +619,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -538,21 +639,29 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -573,12 +682,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -610,6 +717,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -618,6 +726,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -638,7 +747,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -652,7 +763,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -662,7 +797,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 813e3a8..47247ad 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:41 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,56 +59,70 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+CONFIG_MIPS_PB1100=y
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-CONFIG_SOC_AU1100=y
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-CONFIG_MIPS_PB1100=y
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
CONFIG_SWAP_IO_SPACE=y
# CONFIG_AU1X00_USB_DEVICE is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -113,8 +130,10 @@
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -130,15 +149,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -154,6 +197,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
@@ -171,6 +216,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -181,15 +320,20 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -233,9 +377,8 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PB1100=y
-CONFIG_MTD_PB1500_BOOT=y
-CONFIG_MTD_PB1500_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -270,14 +413,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -300,6 +441,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -310,6 +452,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -320,94 +463,28 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -453,6 +530,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -482,18 +561,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -503,6 +570,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -534,14 +611,14 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -550,6 +627,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -560,10 +641,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -583,7 +674,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -593,12 +683,9 @@
#
# USB support
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -613,7 +700,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -622,6 +712,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -640,10 +731,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -664,13 +757,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -704,6 +794,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -713,6 +804,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -772,7 +864,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -788,26 +882,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -819,9 +914,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 49e52834..f91a4ea 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:44 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,80 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+CONFIG_MIPS_PB1500=y
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-CONFIG_SOC_AU1500=y
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
# CONFIG_AU1X00_USB_DEVICE is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -145,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -154,6 +197,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -177,6 +222,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -187,12 +326,87 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -206,7 +420,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -218,7 +431,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -275,6 +487,7 @@
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -292,6 +505,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -302,6 +516,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -314,94 +529,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -409,6 +543,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -435,12 +584,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -453,6 +606,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -484,6 +639,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -513,19 +670,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -535,6 +679,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -554,6 +709,7 @@
CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -585,6 +741,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -595,10 +756,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -612,7 +783,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -622,13 +792,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -646,12 +812,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -670,10 +841,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -694,13 +867,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -712,6 +882,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -732,6 +904,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -741,6 +914,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -800,7 +974,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -816,27 +992,28 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
@@ -847,9 +1024,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 8e42677..bbad27c 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:47 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,63 +59,80 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+CONFIG_MIPS_PB1550=y
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-CONFIG_SOC_AU1550=y
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-CONFIG_MIPS_PB1550=y
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -145,7 +189,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -154,6 +197,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -177,6 +222,100 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -187,12 +326,87 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -206,7 +420,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -218,7 +431,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -275,6 +487,7 @@
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -292,6 +505,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -302,6 +516,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -314,94 +529,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -409,6 +543,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -435,12 +584,16 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -453,6 +606,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -476,6 +631,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -505,19 +662,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -527,6 +671,17 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_VT is not set
@@ -546,6 +701,7 @@
CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -577,6 +733,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -587,10 +748,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -604,7 +775,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -614,13 +784,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -638,12 +804,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -662,10 +833,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -686,13 +859,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -704,6 +874,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -724,6 +896,7 @@
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -733,6 +906,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -792,7 +966,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -808,26 +984,27 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
@@ -839,9 +1016,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
new file mode 100644
index 0000000..95f84d7
--- /dev/null
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -0,0 +1,1069 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:50 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+CONFIG_PNX8550_JBS=y
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+CONFIG_CPU_R4X00=y
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig
new file mode 100644
index 0000000..deb24c2
--- /dev/null
+++ b/arch/mips/configs/pnx8550-v2pci_defconfig
@@ -0,0 +1,1251 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:53 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_PNX8550_V2PCI=y
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+CONFIG_CPU_R4X00=y
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_CPU_ADVANCED=y
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=y
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index b6568e42..741a9a9 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug 8 11:49:54 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:56 2005
#
CONFIG_MIPS=y
@@ -17,6 +17,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
@@ -25,6 +26,7 @@
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -74,6 +76,7 @@
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
@@ -91,6 +94,7 @@
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
@@ -105,7 +109,6 @@
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_I8259=y
@@ -119,7 +122,7 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
@@ -127,7 +130,7 @@
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
-CONFIG_CPU_R4X00=y
+# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
@@ -138,9 +141,11 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
@@ -151,15 +156,18 @@
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -214,8 +222,8 @@
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
@@ -232,9 +240,15 @@
#
# Network testing
#
+# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -248,6 +262,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -265,13 +284,12 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -291,6 +309,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -331,6 +350,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -470,7 +504,6 @@
# I2C support
#
# CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
@@ -481,12 +514,17 @@
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -532,7 +570,6 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
#
# SN Devices
@@ -547,10 +584,6 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -559,6 +592,7 @@
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -576,11 +610,13 @@
#
# Pseudo filesystems
#
-# CONFIG_PROC_FS is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -634,12 +670,35 @@
# Security options
#
# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -649,7 +708,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
new file mode 100644
index 0000000..2bc61ca
--- /dev/null
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -0,0 +1,1259 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:59 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+# CONFIG_KOBJECT_UEVENT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+CONFIG_TOSHIBA_RBTX4938=y
+
+#
+# Multiplex Pin Select
+#
+CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+CONFIG_TOSHIBA_BOARDS=y
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_TX49XX=y
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX49XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_ADVANCED=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+# CONFIG_SCSI is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+# CONFIG_EWRK3 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=y
+# CONFIG_SEEQ8005 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_ARLAN is not set
+# CONFIG_WAVELAN is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+# CONFIG_FB_ATY_XL_INIT is not set
+# CONFIG_FB_ATY_GX is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+CONFIG_USB_YEALINK=m
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 17d4fce..988a058 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:03 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,11 +11,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -26,14 +25,17 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -43,6 +45,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -58,43 +61,73 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
CONFIG_SNI_RM200_PCI=y
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -106,8 +139,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -123,24 +158,49 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
+CONFIG_HW_HAS_EISA=y
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
CONFIG_ISA=y
# CONFIG_EISA is not set
CONFIG_MMU=y
@@ -151,11 +211,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -168,6 +223,281 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# DECnet: Netfilter Configuration
+#
+CONFIG_DECNET_NF_GRABULATOR=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+CONFIG_AX25_DAMA_SLAVE=y
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_YAM is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -176,7 +506,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -188,11 +523,11 @@
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
@@ -204,7 +539,6 @@
# Block devices
#
CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
@@ -249,7 +583,6 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -272,6 +605,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -284,6 +618,7 @@
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -297,17 +632,16 @@
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -318,13 +652,9 @@
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
@@ -344,7 +674,6 @@
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -353,11 +682,12 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
@@ -384,11 +714,15 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -401,266 +735,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# DECnet: Netfilter Configuration
-#
-CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-# CONFIG_VLAN_8021Q is not set
-CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-CONFIG_AX25_DAMA_SLAVE=y
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-# CONFIG_DMASCC is not set
-# CONFIG_SCC is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_YAM is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-CONFIG_ETHERTAP=m
#
# ARCnet devices
@@ -668,6 +749,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -675,7 +771,6 @@
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
@@ -696,7 +791,6 @@
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=m
-# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
@@ -733,13 +827,17 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -752,6 +850,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -765,6 +865,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -794,20 +896,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_PARKBD=m
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -828,6 +916,18 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_PARKBD=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -844,13 +944,13 @@
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -881,6 +981,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -891,15 +996,26 @@
CONFIG_W1=m
CONFIG_W1_MATROX=m
CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
+# CONFIG_W1_DS9490_BRIDGE is not set
CONFIG_W1_THERM=m
CONFIG_W1_SMEM=m
+# CONFIG_W1_DS2433 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -920,7 +1036,6 @@
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -930,6 +1045,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
@@ -940,8 +1057,6 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@@ -949,7 +1064,10 @@
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
@@ -965,11 +1083,10 @@
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -992,12 +1109,17 @@
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
+CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -1022,30 +1144,15 @@
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -1057,9 +1164,11 @@
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1088,6 +1197,7 @@
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_TI is not set
@@ -1110,10 +1220,13 @@
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_SISUSBVGA_CON is not set
+CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -1132,10 +1245,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -1152,17 +1270,20 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -1192,12 +1313,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -1224,15 +1343,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -1256,6 +1378,7 @@
CONFIG_CODA_FS_OLD_API=y
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1329,7 +1452,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -1352,6 +1477,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -1360,13 +1486,13 @@
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -1376,9 +1502,12 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1dc935f3..4365d9c 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:10 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:05 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,32 +61,49 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
CONFIG_SIBYTE_SWARM=y
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
@@ -91,9 +112,12 @@
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_UNKNOWN is not set
-CONFIG_SIBYTE_BOARD=y
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_SIBYTE_SB1250=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
CONFIG_CPU_SB1_PASS_1=y
# CONFIG_CPU_SB1_PASS_2_1250 is not set
# CONFIG_CPU_SB1_PASS_2_2 is not set
@@ -102,18 +126,20 @@
# CONFIG_CPU_SB1_PASS_3 is not set
CONFIG_SIBYTE_HAS_LDT=y
# CONFIG_SIMULATION is not set
+# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_CONFIG_SB1_CERR_STALL is not set
CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_SB1250_PROF is not set
# CONFIG_SIBYTE_TBPROF is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -121,8 +147,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -138,22 +166,46 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_SIBYTE_DMA_PAGEOPS is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
CONFIG_SB1_PASS_1_WORKAROUNDS=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -161,7 +213,6 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
@@ -170,10 +221,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -183,7 +230,86 @@
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -194,7 +320,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -213,7 +344,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -226,8 +356,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=9220
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -263,7 +391,7 @@
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
-CONFIG_BLK_DEV_IDE_SWARM=y
+# CONFIG_BLK_DEV_IDE_SWARM is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
@@ -272,6 +400,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -282,6 +411,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -294,78 +424,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -373,6 +438,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -399,12 +479,16 @@
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -417,6 +501,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -428,6 +514,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -445,25 +533,15 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -472,11 +550,13 @@
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
# CONFIG_STALDRV is not set
CONFIG_SIBYTE_SB1250_DUART=y
CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
@@ -489,6 +569,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -515,6 +596,11 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -525,10 +611,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -542,7 +638,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -552,13 +647,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -576,12 +667,17 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
@@ -591,10 +687,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -615,11 +713,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -643,13 +740,14 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -658,6 +756,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -678,7 +777,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_SB1XXX_CORELIS is not set
@@ -695,27 +796,28 @@
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
@@ -726,9 +828,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index dd07e86..d835f6d 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:10 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:07 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,22 +11,26 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -39,6 +40,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -48,40 +50,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_SEAD=y
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_BOARDS_GEN=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -89,8 +120,10 @@
#
# CPU selection
#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -106,15 +139,42 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -128,10 +188,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -143,6 +199,11 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
# Device Drivers
#
@@ -154,6 +215,10 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -170,7 +235,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -178,11 +242,8 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=18432
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -200,6 +261,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
#
@@ -210,6 +272,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -220,9 +283,8 @@
#
#
-# Networking support
+# Network device support
#
-# CONFIG_NET is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -238,47 +300,18 @@
#
# Input device support
#
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -294,7 +327,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
+CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -315,10 +348,13 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -329,10 +365,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -347,13 +393,6 @@
# CONFIG_FB is not set
#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
# Sound
#
# CONFIG_SOUND is not set
@@ -365,10 +404,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -381,28 +416,31 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
@@ -423,10 +461,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
#
# Miscellaneous filesystems
@@ -448,8 +486,18 @@
#
# Partition Types
#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
@@ -464,15 +512,16 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
#
# Security options
#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
@@ -488,7 +537,6 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index c9d3f83..bf60a17 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:10 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,55 +59,87 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-CONFIG_TANBAC_TB0226=y
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+CONFIG_TANBAC_TB022X=y
+CONFIG_TANBAC_TB0226=y
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -120,19 +155,44 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_MMU=y
#
@@ -141,12 +201,9 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
+# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
@@ -156,6 +213,87 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -167,6 +305,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -183,19 +326,21 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -209,33 +354,12 @@
#
# ATA/ATAPI/MFM/RLL support
#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_IDE is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -245,15 +369,15 @@
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
@@ -262,11 +386,42 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
@@ -277,131 +432,132 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_IEEE1394 is not set
#
# I2O device support
#
+# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
#
# Ethernet (1000 Mbit)
#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
#
# Token Ring devices
#
+# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW2200 is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -421,28 +577,13 @@
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -452,6 +593,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -462,16 +609,16 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -489,14 +636,22 @@
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_TANBAC_TB0219 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -507,10 +662,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -523,48 +688,147 @@
#
# Graphics support
#
-CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SOUND is not set
#
# USB support
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -582,39 +846,41 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
+# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
@@ -623,13 +889,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -653,16 +916,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -673,6 +939,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -732,9 +999,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
#
# Security options
@@ -746,7 +1015,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -756,9 +1049,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig
index 2cb6691..ac8b64e 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0229_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:13 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,58 +59,87 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0229=y
-CONFIG_TANBAC_TB0219=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+CONFIG_TANBAC_TB022X=y
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -123,12 +155,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -136,8 +192,7 @@
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_MMU=y
#
@@ -146,10 +201,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +213,88 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -170,7 +303,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -189,7 +327,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -199,11 +336,11 @@
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -226,6 +363,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -236,6 +374,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -248,83 +387,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -332,6 +401,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -346,7 +430,7 @@
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
+# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -358,7 +442,11 @@
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -375,14 +463,19 @@
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -395,6 +488,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -416,6 +511,8 @@
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -435,29 +532,13 @@
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -467,6 +548,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -477,16 +564,16 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -505,14 +592,21 @@
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
+CONFIG_TANBAC_TB0219=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -523,10 +617,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -546,7 +650,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -556,13 +659,122 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -580,10 +792,15 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -597,18 +814,22 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -635,13 +856,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -665,16 +883,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -685,6 +906,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -744,9 +966,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,38400 ip=bootp root=/dev/nfs"
+CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
#
# Security options
@@ -758,7 +982,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -768,9 +1016,8 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 17b9f2f..9534483 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep 1 22:58:34 2005
+# Linux kernel version: 2.6.14-rc5-mm1
+# Tue Oct 25 00:20:22 2005
#
CONFIG_MIPS=y
@@ -19,6 +19,7 @@
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
+CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
@@ -55,25 +56,67 @@
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
#
# Machine selection
#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
CONFIG_TANBAC_TB022X=y
# CONFIG_TANBAC_TB0226 is not set
CONFIG_TANBAC_TB0287=y
@@ -81,48 +124,23 @@
# CONFIG_ZAO_CAPCELLA is not set
CONFIG_PCI_VR41XX=y
# CONFIG_VRC4173 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -138,12 +156,25 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -152,6 +183,9 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -262,7 +296,6 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -280,6 +313,11 @@
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -296,7 +334,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -312,6 +349,7 @@
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -321,6 +359,11 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ATA_OVER_ETH is not set
#
@@ -410,13 +453,20 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI Transport Layers
+#
+# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -425,12 +475,10 @@
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -462,6 +510,7 @@
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -529,6 +578,7 @@
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -572,6 +622,7 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
#
# Wan interfaces
@@ -682,6 +733,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -770,12 +822,15 @@
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -891,6 +946,11 @@
#
#
+# EDAC - error detection and reporting (RAS)
+#
+# CONFIG_EDAC is not set
+
+#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
@@ -901,20 +961,22 @@
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
@@ -948,8 +1010,8 @@
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1004,6 +1066,11 @@
# CONFIG_NLS is not set
#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
@@ -1036,6 +1103,3 @@
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ISA_DMA_API=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 16e07fc..ab13621 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:16 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,24 +11,29 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,56 +59,84 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-CONFIG_IBM_WORKPAD=y
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_VRC4171=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+CONFIG_IBM_WORKPAD=y
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
CONFIG_CPU_VR41XX=y
@@ -121,12 +152,36 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
@@ -138,11 +193,17 @@
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
@@ -157,6 +218,78 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -165,7 +298,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
@@ -185,18 +323,13 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
@@ -219,6 +352,7 @@
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -237,6 +371,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -252,6 +387,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -262,76 +398,13 @@
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -339,12 +412,26 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
@@ -373,6 +460,19 @@
# CONFIG_NET_RADIO is not set
#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+
+#
# Wan interfaces
#
# CONFIG_WAN is not set
@@ -380,6 +480,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -409,18 +511,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -430,6 +520,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -440,16 +540,15 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -484,10 +583,19 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_GPIO_VR41XX is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -498,10 +606,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -522,7 +640,6 @@
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -536,10 +653,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -552,7 +665,10 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
@@ -561,6 +677,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
@@ -570,10 +687,12 @@
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -594,12 +713,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -630,6 +747,7 @@
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -638,6 +756,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -658,9 +777,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M"
#
# Security options
@@ -672,7 +793,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -682,7 +827,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 6d22907..5b0b7f3 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:13 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:18 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,25 +11,31 @@
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +45,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -56,34 +60,68 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-CONFIG_PMC_YOSEMITE=y
-# CONFIG_HYPERTRANSPORT is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_PMC_YOSEMITE=y
+# CONFIG_QEMU is not set
# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_HYPERTRANSPORT is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_IRQ_CPU_RM9K=y
@@ -93,8 +131,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -110,20 +150,43 @@
# CONFIG_CPU_RM7000 is not set
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -131,7 +194,7 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_MMU=y
#
@@ -140,10 +203,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -155,6 +214,69 @@
CONFIG_TRAD_SIGNALS=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
# Device Drivers
#
@@ -163,10 +285,15 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -183,7 +310,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -193,7 +319,6 @@
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -216,6 +341,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
@@ -226,6 +352,7 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -238,59 +365,8 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -303,6 +379,21 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -327,13 +418,16 @@
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
CONFIG_TITAN_GE=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -346,6 +440,8 @@
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
#
# Wan interfaces
@@ -354,6 +450,8 @@
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -371,20 +469,10 @@
# CONFIG_INPUT is not set
#
-# Userland interfaces
+# Hardware I/O ports
#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -405,6 +493,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -432,6 +521,10 @@
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -442,10 +535,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -459,7 +562,6 @@
# Graphics support
#
# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -469,13 +571,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -493,6 +591,10 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -500,13 +602,16 @@
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -527,11 +632,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -552,7 +656,7 @@
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
@@ -573,8 +677,11 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -599,7 +706,31 @@
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -609,7 +740,8 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/ddb5xxx/Kconfig b/arch/mips/ddb5xxx/Kconfig
new file mode 100644
index 0000000..e9b5de4
--- /dev/null
+++ b/arch/mips/ddb5xxx/Kconfig
@@ -0,0 +1,4 @@
+config DDB5477_BUS_FREQUENCY
+ int "bus frequency (in kHZ, 0 for auto-detect)"
+ depends on DDB5477
+ default 0
diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
index 68c127c..8743ffc 100644
--- a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
+++ b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
@@ -209,14 +209,13 @@
#define nile4_irq_shutdown nile4_disable_irq
static hw_irq_controller nile4_irq_controller = {
- "nile4",
- nile4_irq_startup,
- nile4_irq_shutdown,
- nile4_enable_irq,
- nile4_disable_irq,
- nile4_ack_irq,
- nile4_irq_end,
- NULL
+ .typename = "nile4",
+ .startup = nile4_irq_startup,
+ .shutdown = nile4_irq_shutdown,
+ .enable = nile4_enable_irq,
+ .disable = nile4_disable_irq,
+ .ack = nile4_ack_irq,
+ .end = nile4_irq_end,
};
void nile4_irq_setup(u32 base) {
diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c
index a73a597..11535be 100644
--- a/arch/mips/ddb5xxx/ddb5074/setup.c
+++ b/arch/mips/ddb5xxx/ddb5074/setup.c
@@ -85,7 +85,7 @@
-static void __init ddb5074_setup(void)
+void __init plat_setup(void)
{
set_io_port_base(NILE4_PCI_IO_BASE);
isa_slot_offset = NILE4_PCI_MEM_BASE;
@@ -106,8 +106,6 @@
panic_timeout = 180;
}
-early_initcall(ddb5074_setup);
-
#define USE_NILE4_SERIAL 0
#if USE_NILE4_SERIAL
diff --git a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c
index 71531f8..f4e480a 100644
--- a/arch/mips/ddb5xxx/ddb5476/setup.c
+++ b/arch/mips/ddb5xxx/ddb5476/setup.c
@@ -124,7 +124,7 @@
static void ddb5476_board_init(void);
-static void __init ddb5476_setup(void)
+void __init plat_setup(void)
{
set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
@@ -158,8 +158,6 @@
ddb5476_board_init();
}
-early_initcall(ddb5476_setup);
-
/*
* We don't trust bios. We essentially does hardware re-initialization
* as complete as possible, as far as we know we can safely do.
diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
index a77682b..f66fe5b 100644
--- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
+++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
@@ -53,14 +53,13 @@
}
static hw_irq_controller vrc5476_irq_controller = {
- "vrc5476",
- vrc5476_irq_startup,
- vrc5476_irq_shutdown,
- vrc5476_irq_enable,
- vrc5476_irq_disable,
- vrc5476_irq_ack,
- vrc5476_irq_end,
- NULL /* no affinity stuff for UP */
+ .typename = "vrc5476",
+ .startup = vrc5476_irq_startup,
+ .shutdown = vrc5476_irq_shutdown,
+ .enable = vrc5476_irq_enable,
+ .disable = vrc5476_irq_disable,
+ .ack = vrc5476_irq_ack,
+ .end = vrc5476_irq_end
};
void __init
diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
index 0d5e706..5fcd5f0 100644
--- a/arch/mips/ddb5xxx/ddb5477/irq_5477.c
+++ b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
@@ -90,14 +90,13 @@
}
hw_irq_controller vrc5477_irq_controller = {
- "vrc5477_irq",
- vrc5477_irq_startup,
- vrc5477_irq_shutdown,
- vrc5477_irq_enable,
- vrc5477_irq_disable,
- vrc5477_irq_ack,
- vrc5477_irq_end,
- NULL /* no affinity stuff for UP */
+ .typename = "vrc5477_irq",
+ .startup = vrc5477_irq_startup,
+ .shutdown = vrc5477_irq_shutdown,
+ .enable = vrc5477_irq_enable,
+ .disable = vrc5477_irq_disable,
+ .ack = vrc5477_irq_ack,
+ .end = vrc5477_irq_end
};
void __init vrc5477_irq_init(u32 irq_base)
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index d62f5a7..8116335 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -170,7 +170,7 @@
extern struct pci_controller ddb5477_ext_controller;
extern struct pci_controller ddb5477_io_controller;
-static int ddb5477_setup(void)
+void __init plat_setup(void)
{
/* initialize board - we don't trust the loader */
ddb5477_board_init();
@@ -193,12 +193,8 @@
register_pci_controller (&ddb5477_ext_controller);
register_pci_controller (&ddb5477_io_controller);
-
- return 0;
}
-early_initcall(ddb5477_setup);
-
static void __init ddb5477_board_init(void)
{
/* ----------- setup PDARs ------------ */
diff --git a/arch/mips/dec/Makefile b/arch/mips/dec/Makefile
index 688757a..ed181fd 100644
--- a/arch/mips/dec/Makefile
+++ b/arch/mips/dec/Makefile
@@ -2,8 +2,8 @@
# Makefile for the DECstation family specific parts of the kernel
#
-obj-y := ecc-berr.o int-handler.o ioasic-irq.o kn02-irq.o reset.o \
- setup.o time.o
+obj-y := ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
+ kn02-irq.o kn02xa-berr.o reset.o setup.o time.o
obj-$(CONFIG_PROM_CONSOLE) += promcon.o
obj-$(CONFIG_CPU_HAS_WB) += wbflush.o
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 6dbce92..cc24c5e 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -6,7 +6,7 @@
* 5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
* 5900/260 (KN05) systems.
*
- * Copyright (c) 2003 Maciej W. Rozycki
+ * Copyright (c) 2003, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -15,6 +15,7 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
@@ -57,7 +58,7 @@
const char *kind, *agent, *cycle, *event;
const char *status = "", *xbit = "", *fmt = "";
- dma_addr_t address;
+ unsigned long address;
u16 syn = 0, sngl;
int i = 0;
@@ -66,7 +67,7 @@
u32 chksyn = *kn0x_chksyn;
int action = MIPS_BE_FATAL;
- /* For non-ECC ack ASAP, so any subsequent errors get caught. */
+ /* For non-ECC ack ASAP, so that any subsequent errors get caught. */
if ((erraddr & (KN0X_EAR_VALID | KN0X_EAR_ECCERR)) == KN0X_EAR_VALID)
dec_ecc_be_ack();
@@ -74,7 +75,7 @@
if (!(erraddr & KN0X_EAR_VALID)) {
/* No idea what happened. */
- printk(KERN_ALERT "Unidentified bus error %s.\n", kind);
+ printk(KERN_ALERT "Unidentified bus error %s\n", kind);
return action;
}
@@ -126,7 +127,7 @@
/* Ack now, no rewrite will happen. */
dec_ecc_be_ack();
- fmt = KERN_ALERT "%s" "invalid.\n";
+ fmt = KERN_ALERT "%s" "invalid\n";
} else {
sngl = syn & KN0X_ESR_SNGLO;
syn &= KN0X_ESR_SYNLO;
@@ -144,7 +145,8 @@
} else if (!sngl) {
status = dbestr;
} else {
- volatile u32 *ptr = (void *)KSEG1ADDR(address);
+ volatile u32 *ptr =
+ (void *)CKSEG1ADDR(address);
*ptr = *ptr; /* Rewrite. */
iob();
@@ -160,12 +162,12 @@
if (syn == 0x01) {
fmt = KERN_ALERT "%s"
"%#04x -- %s bit error "
- "at check bit C%s.\n";
+ "at check bit C%s\n";
xbit = "X";
} else {
fmt = KERN_ALERT "%s"
"%#04x -- %s bit error "
- "at check bit C%s%u.\n";
+ "at check bit C%s%u\n";
}
i = syn >> 2;
} else {
@@ -175,16 +177,16 @@
if (i < 32)
fmt = KERN_ALERT "%s"
"%#04x -- %s bit error "
- "at data bit D%s%u.\n";
+ "at data bit D%s%u\n";
else
fmt = KERN_ALERT "%s"
- "%#04x -- %s bit error.\n";
+ "%#04x -- %s bit error\n";
}
}
}
if (action != MIPS_BE_FIXUP)
- printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx.\n",
+ printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
kind, agent, cycle, event, address);
if (action != MIPS_BE_FIXUP && erraddr & KN0X_EAR_ECCERR)
@@ -203,11 +205,11 @@
int action = dec_ecc_be_backend(regs, 0, 1);
if (action == MIPS_BE_DISCARD)
- return IRQ_NONE;
+ return IRQ_HANDLED;
/*
- * FIXME: Find affected processes and kill them, otherwise we
- * must die.
+ * FIXME: Find the affected processes and kill them, otherwise
+ * we must die.
*
* The interrupt is asynchronously delivered thus EPC and RA
* may be irrelevant, but are printed for a reference.
@@ -225,16 +227,16 @@
*/
static inline void dec_kn02_be_init(void)
{
- volatile u32 *csr = (void *)KN02_CSR_BASE;
+ volatile u32 *csr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
unsigned long flags;
- kn0x_erraddr = (void *)(KN02_SLOT_BASE + KN02_ERRADDR);
- kn0x_chksyn = (void *)(KN02_SLOT_BASE + KN02_CHKSYN);
+ kn0x_erraddr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_ERRADDR);
+ kn0x_chksyn = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CHKSYN);
spin_lock_irqsave(&kn02_lock, flags);
/* Preset write-only bits of the Control Register cache. */
- cached_kn02_csr = *csr | KN03_CSR_LEDS;
+ cached_kn02_csr = *csr | KN02_CSR_LEDS;
/* Set normal ECC detection and generation. */
cached_kn02_csr &= ~(KN02_CSR_DIAGCHK | KN02_CSR_DIAGGEN);
@@ -248,11 +250,11 @@
static inline void dec_kn03_be_init(void)
{
- volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR);
- volatile u32 *mbcs = (void *)(KN03_SLOT_BASE + KN05_MB_CSR);
+ volatile u32 *mcr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
+ volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
- kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
- kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
+ kn0x_erraddr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_ERRADDR);
+ kn0x_chksyn = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_CHKSYN);
/*
* Set normal ECC detection and generation, enable ECC correction.
@@ -264,7 +266,7 @@
*mcr = (*mcr & ~(KN03_MCR_DIAGCHK | KN03_MCR_DIAGGEN)) |
KN03_MCR_CORRECT;
if (current_cpu_data.cputype == CPU_R4400SC)
- *mbcs |= KN05_MB_CSR_EE;
+ *mbcs |= KN4K_MB_CSR_EE;
fast_iob();
}
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index c89768d..41fa372 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -2,9 +2,9 @@
* arch/mips/dec/int-handler.S
*
* Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
*
- * Written by Ralf Baechle and Andreas Busse, modified for DECStation
+ * Written by Ralf Baechle and Andreas Busse, modified for DECstation
* support by Paul Antoine and Harald Koerfgen.
*
* completly rewritten:
@@ -14,11 +14,12 @@
* by Maciej W. Rozycki.
*/
#include <linux/config.h>
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
+
#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
#include <asm/dec/interrupts.h>
#include <asm/dec/ioasic_addrs.h>
@@ -28,11 +29,14 @@
#include <asm/dec/kn02xa.h>
#include <asm/dec/kn03.h>
+#define KN02_CSR_BASE CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR)
+#define KN02XA_IOASIC_BASE CKSEG1ADDR(KN02XA_SLOT_BASE + IOASIC_IOCTL)
+#define KN03_IOASIC_BASE CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_IOCTL)
.text
.set noreorder
/*
- * decstation_handle_int: Interrupt handler for DECStations
+ * decstation_handle_int: Interrupt handler for DECstations
*
* We follow the model in the Indy interrupt code by David Miller, where he
* says: a lot of complication here is taken away because:
@@ -48,7 +52,7 @@
* 3) Linux only thinks in terms of all IRQs on or all IRQs
* off, nothing in between like BSD spl() brain-damage.
*
- * Furthermore, the IRQs on the DECStations look basically (barring
+ * Furthermore, the IRQs on the DECstations look basically (barring
* software IRQs which we don't use at all) like...
*
* DS2100/3100's, aka kn01, aka Pmax:
@@ -61,7 +65,7 @@
* 3 Lance Ethernet
* 4 DZ11 serial
* 5 RTC
- * 6 Memory Controller
+ * 6 Memory Controller & Video
* 7 FPU
*
* DS5000/200, aka kn02, aka 3max:
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
new file mode 100644
index 0000000..b9271db
--- /dev/null
+++ b/arch/mips/dec/kn01-berr.c
@@ -0,0 +1,201 @@
+/*
+ * linux/arch/mips/dec/kn01-berr.c
+ *
+ * Bus error event handling code for DECstation/DECsystem 3100
+ * and 2100 (KN01) systems equipped with parity error detection
+ * logic.
+ *
+ * Copyright (c) 2005 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/inst.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+
+#include <asm/dec/kn01.h>
+
+
+/* CP0 hazard avoidance. */
+#define BARRIER \
+ __asm__ __volatile__( \
+ ".set push\n\t" \
+ ".set noreorder\n\t" \
+ "nop\n\t" \
+ ".set pop\n\t")
+
+/*
+ * Bits 7:0 of the Control Register are write-only -- the
+ * corresponding bits of the Status Register have a different
+ * meaning. Hence we use a cache. It speeds up things a bit
+ * as well.
+ *
+ * There is no default value -- it has to be initialized.
+ */
+u16 cached_kn01_csr;
+DEFINE_SPINLOCK(kn01_lock);
+
+
+static inline void dec_kn01_be_ack(void)
+{
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+ unsigned long flags;
+
+ spin_lock_irqsave(&kn01_lock, flags);
+
+ *csr = cached_kn01_csr | KN01_CSR_MEMERR; /* Clear bus IRQ. */
+ iob();
+
+ spin_unlock_irqrestore(&kn01_lock, flags);
+}
+
+static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
+{
+ volatile u32 *kn01_erraddr = (void *)CKSEG1ADDR(KN01_SLOT_BASE +
+ KN01_ERRADDR);
+
+ static const char excstr[] = "exception";
+ static const char intstr[] = "interrupt";
+ static const char cpustr[] = "CPU";
+ static const char mreadstr[] = "memory read";
+ static const char readstr[] = "read";
+ static const char writestr[] = "write";
+ static const char timestr[] = "timeout";
+ static const char paritystr[] = "parity error";
+
+ int data = regs->cp0_cause & 4;
+ unsigned int __user *pc = (unsigned int __user *)regs->cp0_epc +
+ ((regs->cp0_cause & CAUSEF_BD) != 0);
+ union mips_instruction insn;
+ unsigned long entrylo, offset;
+ long asid, entryhi, vaddr;
+
+ const char *kind, *agent, *cycle, *event;
+ unsigned long address;
+
+ u32 erraddr = *kn01_erraddr;
+ int action = MIPS_BE_FATAL;
+
+ /* Ack ASAP, so that any subsequent errors get caught. */
+ dec_kn01_be_ack();
+
+ kind = invoker ? intstr : excstr;
+
+ agent = cpustr;
+
+ if (invoker)
+ address = erraddr;
+ else {
+ /* Bloody hardware doesn't record the address for reads... */
+ if (data) {
+ /* This never faults. */
+ __get_user(insn.word, pc);
+ vaddr = regs->regs[insn.i_format.rs] +
+ insn.i_format.simmediate;
+ } else
+ vaddr = (long)pc;
+ if (KSEGX(vaddr) == CKSEG0 || KSEGX(vaddr) == CKSEG1)
+ address = CPHYSADDR(vaddr);
+ else {
+ /* Peek at what physical address the CPU used. */
+ asid = read_c0_entryhi();
+ entryhi = asid & (PAGE_SIZE - 1);
+ entryhi |= vaddr & ~(PAGE_SIZE - 1);
+ write_c0_entryhi(entryhi);
+ BARRIER;
+ tlb_probe();
+ /* No need to check for presence. */
+ tlb_read();
+ entrylo = read_c0_entrylo0();
+ write_c0_entryhi(asid);
+ offset = vaddr & (PAGE_SIZE - 1);
+ address = (entrylo & ~(PAGE_SIZE - 1)) | offset;
+ }
+ }
+
+ /* Treat low 256MB as memory, high -- as I/O. */
+ if (address < 0x10000000) {
+ cycle = mreadstr;
+ event = paritystr;
+ } else {
+ cycle = invoker ? writestr : readstr;
+ event = timestr;
+ }
+
+ if (is_fixup)
+ action = MIPS_BE_FIXUP;
+
+ if (action != MIPS_BE_FIXUP)
+ printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
+ kind, agent, cycle, event, address);
+
+ return action;
+}
+
+int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ return dec_kn01_be_backend(regs, is_fixup, 0);
+}
+
+irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+ int action;
+
+ if (!(*csr & KN01_CSR_MEMERR))
+ return IRQ_NONE; /* Must have been video. */
+
+ action = dec_kn01_be_backend(regs, 0, 1);
+
+ if (action == MIPS_BE_DISCARD)
+ return IRQ_HANDLED;
+
+ /*
+ * FIXME: Find the affected processes and kill them, otherwise
+ * we must die.
+ *
+ * The interrupt is asynchronously delivered thus EPC and RA
+ * may be irrelevant, but are printed for a reference.
+ */
+ printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+ regs->cp0_epc, regs->regs[31]);
+ die("Unrecoverable bus error", regs);
+}
+
+
+void __init dec_kn01_be_init(void)
+{
+ volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+ unsigned long flags;
+
+ spin_lock_irqsave(&kn01_lock, flags);
+
+ /* Preset write-only bits of the Control Register cache. */
+ cached_kn01_csr = *csr;
+ cached_kn01_csr &= KN01_CSR_STATUS | KN01_CSR_PARDIS | KN01_CSR_TXDIS;
+ cached_kn01_csr |= KN01_CSR_LEDS;
+
+ /* Enable parity error detection. */
+ cached_kn01_csr &= ~KN01_CSR_PARDIS;
+ *csr = cached_kn01_csr;
+ iob();
+
+ spin_unlock_irqrestore(&kn01_lock, flags);
+
+ /* Clear any leftover errors from the firmware. */
+ dec_kn01_be_ack();
+}
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index e0bfcd1..898bed5 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -4,7 +4,7 @@
* DECstation 5000/200 (KN02) Control and Status Register
* interrupts.
*
- * Copyright (c) 2002, 2003 Maciej W. Rozycki
+ * Copyright (c) 2002, 2003, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -37,7 +37,8 @@
static inline void unmask_kn02_irq(unsigned int irq)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
cached_kn02_csr |= (1 << (irq - kn02_irq_base + 16));
*csr = cached_kn02_csr;
@@ -45,7 +46,8 @@
static inline void mask_kn02_irq(unsigned int irq)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
cached_kn02_csr &= ~(1 << (irq - kn02_irq_base + 16));
*csr = cached_kn02_csr;
@@ -105,13 +107,14 @@
void __init init_kn02_irqs(int base)
{
- volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+ volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+ KN02_CSR);
unsigned long flags;
int i;
/* Mask interrupts. */
spin_lock_irqsave(&kn02_lock, flags);
- cached_kn02_csr &= ~KN03_CSR_IOINTEN;
+ cached_kn02_csr &= ~KN02_CSR_IOINTEN;
*csr = cached_kn02_csr;
iob();
spin_unlock_irqrestore(&kn02_lock, flags);
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
new file mode 100644
index 0000000..6cd3f94
--- /dev/null
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/mips/dec/kn02xa-berr.c
+ *
+ * Bus error event handling code for 5000-series systems equipped
+ * with parity error detection logic, i.e. DECstation/DECsystem
+ * 5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
+ * DECstation/DECsystem 5000/20, /25, /33 (KN02-CA), 5000/50
+ * (KN04-CA) systems.
+ *
+ * Copyright (c) 2005 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+#include <asm/dec/kn02ca.h>
+#include <asm/dec/kn02xa.h>
+#include <asm/dec/kn05.h>
+
+static inline void dec_kn02xa_be_ack(void)
+{
+ volatile u32 *mer = (void *)CKSEG1ADDR(KN02XA_MER);
+ volatile u32 *mem_intr = (void *)CKSEG1ADDR(KN02XA_MEM_INTR);
+
+ *mer = KN02CA_MER_INTR; /* Clear errors; keep the ARC IRQ. */
+ *mem_intr = 0; /* Any write clears the bus IRQ. */
+ iob();
+}
+
+static int dec_kn02xa_be_backend(struct pt_regs *regs, int is_fixup,
+ int invoker)
+{
+ volatile u32 *kn02xa_mer = (void *)CKSEG1ADDR(KN02XA_MER);
+ volatile u32 *kn02xa_ear = (void *)CKSEG1ADDR(KN02XA_EAR);
+
+ static const char excstr[] = "exception";
+ static const char intstr[] = "interrupt";
+ static const char cpustr[] = "CPU";
+ static const char mreadstr[] = "memory read";
+ static const char readstr[] = "read";
+ static const char writestr[] = "write";
+ static const char timestr[] = "timeout";
+ static const char paritystr[] = "parity error";
+ static const char lanestat[][4] = { " OK", "BAD" };
+
+ const char *kind, *agent, *cycle, *event;
+ unsigned long address;
+
+ u32 mer = *kn02xa_mer;
+ u32 ear = *kn02xa_ear;
+ int action = MIPS_BE_FATAL;
+
+ /* Ack ASAP, so that any subsequent errors get caught. */
+ dec_kn02xa_be_ack();
+
+ kind = invoker ? intstr : excstr;
+
+ /* No DMA errors? */
+ agent = cpustr;
+
+ address = ear & KN02XA_EAR_ADDRESS;
+
+ /* Low 256MB is decoded as memory, high -- as TC. */
+ if (address < 0x10000000) {
+ cycle = mreadstr;
+ event = paritystr;
+ } else {
+ cycle = invoker ? writestr : readstr;
+ event = timestr;
+ }
+
+ if (is_fixup)
+ action = MIPS_BE_FIXUP;
+
+ if (action != MIPS_BE_FIXUP)
+ printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
+ kind, agent, cycle, event, address);
+
+ if (action != MIPS_BE_FIXUP && address < 0x10000000)
+ printk(KERN_ALERT " Byte lane status %#3x -- "
+ "#3: %s, #2: %s, #1: %s, #0: %s\n",
+ (mer & KN02XA_MER_BYTERR) >> 8,
+ lanestat[(mer & KN02XA_MER_BYTERR_3) != 0],
+ lanestat[(mer & KN02XA_MER_BYTERR_2) != 0],
+ lanestat[(mer & KN02XA_MER_BYTERR_1) != 0],
+ lanestat[(mer & KN02XA_MER_BYTERR_0) != 0]);
+
+ return action;
+}
+
+int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ return dec_kn02xa_be_backend(regs, is_fixup, 0);
+}
+
+irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ int action = dec_kn02xa_be_backend(regs, 0, 1);
+
+ if (action == MIPS_BE_DISCARD)
+ return IRQ_HANDLED;
+
+ /*
+ * FIXME: Find the affected processes and kill them, otherwise
+ * we must die.
+ *
+ * The interrupt is asynchronously delivered thus EPC and RA
+ * may be irrelevant, but are printed for a reference.
+ */
+ printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+ regs->cp0_epc, regs->regs[31]);
+ die("Unrecoverable bus error", regs);
+}
+
+
+void __init dec_kn02xa_be_init(void)
+{
+ volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
+
+ /* For KN04 we need to make sure EE (?) is enabled in the MB. */
+ if (current_cpu_data.cputype == CPU_R4000SC)
+ *mbcs |= KN4K_MB_CSR_EE;
+ fast_iob();
+
+ /* Clear any leftover errors from the firmware. */
+ dec_kn02xa_be_ack();
+}
diff --git a/arch/mips/dec/prom/identify.c b/arch/mips/dec/prom/identify.c
index 9380588..81d5e87 100644
--- a/arch/mips/dec/prom/identify.c
+++ b/arch/mips/dec/prom/identify.c
@@ -2,7 +2,7 @@
* identify.c: machine identification code.
*
* Copyright (C) 1998 Harald Koerfgen and Paul M. Antoine
- * Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005 Maciej W. Rozycki
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <asm/bootinfo.h>
+
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/kn01.h>
@@ -21,6 +22,7 @@
#include <asm/dec/kn03.h>
#include <asm/dec/kn230.h>
#include <asm/dec/prom.h>
+#include <asm/dec/system.h>
#include "dectypes.h"
@@ -68,34 +70,44 @@
static inline void prom_init_kn01(void)
{
- dec_rtc_base = (void *)KN01_RTC_BASE;
+ dec_kn_slot_base = KN01_SLOT_BASE;
dec_kn_slot_size = KN01_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
}
static inline void prom_init_kn230(void)
{
- dec_rtc_base = (void *)KN01_RTC_BASE;
+ dec_kn_slot_base = KN01_SLOT_BASE;
dec_kn_slot_size = KN01_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
}
static inline void prom_init_kn02(void)
{
- dec_rtc_base = (void *)KN02_RTC_BASE;
+ dec_kn_slot_base = KN02_SLOT_BASE;
dec_kn_slot_size = KN02_SLOT_SIZE;
+
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN02_RTC);
}
static inline void prom_init_kn02xa(void)
{
- ioasic_base = (void *)KN02XA_IOASIC_BASE;
- dec_rtc_base = (void *)KN02XA_RTC_BASE;
+ dec_kn_slot_base = KN02XA_SLOT_BASE;
dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+ ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
}
static inline void prom_init_kn03(void)
{
- ioasic_base = (void *)KN03_IOASIC_BASE;
- dec_rtc_base = (void *)KN03_RTC_BASE;
+ dec_kn_slot_base = KN03_SLOT_BASE;
dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+ ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+ dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
}
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index 60f7425..32a7cc7 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -6,6 +6,8 @@
*/
#include <linux/config.h>
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/linkage.h>
#include <linux/smp.h>
#include <linux/string.h>
#include <linux/types.h>
@@ -85,17 +87,13 @@
void __init prom_init(void)
{
- extern void dec_machine_halt(void);
+ extern void ATTRIB_NORET dec_machine_halt(void);
static char cpu_msg[] __initdata =
"Sorry, this kernel is compiled for a wrong CPU type!\n";
- static char r3k_msg[] __initdata =
- "Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
- static char r4k_msg[] __initdata =
- "Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
s32 argc = fw_arg0;
- s32 argv = fw_arg1;
+ s32 *argv = (void *)fw_arg1;
u32 magic = fw_arg2;
- s32 prom_vec = fw_arg3;
+ s32 *prom_vec = (void *)fw_arg3;
/*
* Determine which PROM we have
@@ -113,6 +111,8 @@
#if defined(CONFIG_CPU_R3000)
if ((current_cpu_data.cputype == CPU_R4000SC) ||
(current_cpu_data.cputype == CPU_R4400SC)) {
+ static char r4k_msg[] __initdata =
+ "Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
printk(cpu_msg);
printk(r4k_msg);
dec_machine_halt();
@@ -122,6 +122,8 @@
#if defined(CONFIG_CPU_R4X00)
if ((current_cpu_data.cputype == CPU_R3000) ||
(current_cpu_data.cputype == CPU_R3000A)) {
+ static char r3k_msg[] __initdata =
+ "Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
printk(cpu_msg);
printk(r3k_msg);
dec_machine_halt();
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index e4f6f26..83d4556 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -35,22 +35,22 @@
extern char genexcept_early;
/* Install exception handler */
- memcpy(&old_handler, (void *)(KSEG0 + 0x80), 0x80);
- memcpy((void *)(KSEG0 + 0x80), &genexcept_early, 0x80);
+ memcpy(&old_handler, (void *)(CKSEG0 + 0x80), 0x80);
+ memcpy((void *)(CKSEG0 + 0x80), &genexcept_early, 0x80);
/* read unmapped and uncached (KSEG1)
* DECstations have at least 4MB RAM
* Assume less than 480MB of RAM, as this is max for 5000/2xx
* FIXME this should be replaced by the first free page!
*/
- for (memory_page = (unsigned char *) KSEG1 + CHUNK_SIZE;
- (mem_err== 0) && (memory_page < ((unsigned char *) KSEG1+0x1E000000));
+ for (memory_page = (unsigned char *)CKSEG1 + CHUNK_SIZE;
+ mem_err == 0 && memory_page < (unsigned char *)CKSEG1 + 0x1e00000;
memory_page += CHUNK_SIZE) {
dummy = *memory_page;
}
- memcpy((void *)(KSEG0 + 0x80), &old_handler, 0x80);
+ memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80);
- add_memory_region(0, (unsigned long)memory_page - KSEG1 - CHUNK_SIZE,
+ add_memory_region(0, (unsigned long)memory_page - CKSEG1 - CHUNK_SIZE,
BOOT_MEM_RAM);
}
@@ -65,7 +65,7 @@
memmap *bm;
/* some free 64k */
- bm = (memmap *)KSEG0ADDR(0x28000);
+ bm = (memmap *)CKSEG0ADDR(0x28000);
bitmap_size = rex_getbitmap(bm);
diff --git a/arch/mips/dec/reset.c b/arch/mips/dec/reset.c
index 7e4d34d..f78c6da 100644
--- a/arch/mips/dec/reset.c
+++ b/arch/mips/dec/reset.c
@@ -14,7 +14,7 @@
static inline void ATTRIB_NORET back_to_prom(void)
{
- noret_func_t func = (void *) KSEG1ADDR(0x1fc00000);
+ noret_func_t func = (void *)CKSEG1ADDR(0x1fc00000);
func();
}
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 6a69309..9ef54fe 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -1,19 +1,20 @@
/*
- * Setup the interrupt stuff.
+ * System-specific setup, especially interrupts.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1998 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
*/
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/param.h>
#include <linux/console.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
@@ -38,6 +39,7 @@
#include <asm/dec/kn02ca.h>
#include <asm/dec/kn03.h>
#include <asm/dec/kn230.h>
+#include <asm/dec/system.h>
extern void dec_machine_restart(char *command);
@@ -47,10 +49,16 @@
extern asmlinkage void decstation_handle_int(void);
+unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+EXPORT_SYMBOL(dec_kn_slot_base);
+EXPORT_SYMBOL(dec_kn_slot_size);
+
spinlock_t ioasic_ssr_lock;
volatile u32 *ioasic_base;
-unsigned long dec_kn_slot_size;
+
+EXPORT_SYMBOL(ioasic_base);
/*
* IRQ routing and priority tables. Priorites are set as follows:
@@ -77,6 +85,9 @@
int dec_interrupt[DEC_NR_INTS] = {
[0 ... DEC_NR_INTS - 1] = -1
};
+
+EXPORT_SYMBOL(dec_interrupt);
+
int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2] = {
{ { .i = ~0 }, { .p = dec_intr_unimplemented } },
};
@@ -108,11 +119,20 @@
/*
* Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
*/
-void __init dec_be_init(void)
+static void __init dec_be_init(void)
{
switch (mips_machtype) {
case MACH_DS23100: /* DS2100/DS3100 Pmin/Pmax */
+ board_be_handler = dec_kn01_be_handler;
+ busirq.handler = dec_kn01_be_interrupt;
busirq.flags |= SA_SHIRQ;
+ dec_kn01_be_init();
+ break;
+ case MACH_DS5000_1XX: /* DS5000/1xx 3min */
+ case MACH_DS5000_XX: /* DS5000/xx Maxine */
+ board_be_handler = dec_kn02xa_be_handler;
+ busirq.handler = dec_kn02xa_be_interrupt;
+ dec_kn02xa_be_init();
break;
case MACH_DS5000_200: /* DS5000/200 3max */
case MACH_DS5000_2X0: /* DS5000/240 3max+ */
@@ -128,7 +148,7 @@
extern void dec_time_init(void);
extern void dec_timer_setup(struct irqaction *);
-static void __init decstation_setup(void)
+void __init plat_setup(void)
{
board_be_init = dec_be_init;
board_time_init = dec_time_init;
@@ -139,9 +159,10 @@
_machine_restart = dec_machine_restart;
_machine_halt = dec_machine_halt;
_machine_power_off = dec_machine_power_off;
-}
-early_initcall(decstation_setup);
+ ioport_resource.start = ~0UL;
+ ioport_resource.end = 0UL;
+}
/*
* Machine-specific initialisation for KN01, aka DS2100 (aka Pmin)
@@ -206,7 +227,7 @@
{ .p = cpu_all_int } },
};
-void __init dec_init_kn01(void)
+static void __init dec_init_kn01(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn01_interrupt,
@@ -281,7 +302,7 @@
{ .p = cpu_all_int } },
};
-void __init dec_init_kn230(void)
+static void __init dec_init_kn230(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn230_interrupt,
@@ -371,7 +392,7 @@
{ .p = kn02_all_int } },
};
-void __init dec_init_kn02(void)
+static void __init dec_init_kn02(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02_interrupt,
@@ -472,7 +493,7 @@
{ .p = asic_all_int } },
};
-void __init dec_init_kn02ba(void)
+static void __init dec_init_kn02ba(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02ba_interrupt,
@@ -569,7 +590,7 @@
{ .p = asic_all_int } },
};
-void __init dec_init_kn02ca(void)
+static void __init dec_init_kn02ca(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn02ca_interrupt,
@@ -670,7 +691,7 @@
{ .p = asic_all_int } },
};
-void __init dec_init_kn03(void)
+static void __init dec_init_kn03(void)
{
/* IRQ routing. */
memcpy(&dec_interrupt, &kn03_interrupt,
@@ -744,7 +765,3 @@
if (dec_interrupt[DEC_IRQ_HALT] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
}
-
-EXPORT_SYMBOL(ioasic_base);
-EXPORT_SYMBOL(dec_kn_slot_size);
-EXPORT_SYMBOL(dec_interrupt);
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index 20f84b1..4b585e6 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,12 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:48:59 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:09 2005
#
CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
#
# Code maturity level options
@@ -14,25 +11,30 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -57,41 +60,69 @@
#
# Machine selection
#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
CONFIG_SGI_IP22=y
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_ARC=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_ARC32=y
@@ -103,8 +134,10 @@
#
# CPU selection
#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
@@ -120,22 +153,48 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
CONFIG_IP22_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
+CONFIG_HW_HAS_EISA=y
# CONFIG_EISA is not set
CONFIG_MMU=y
@@ -145,10 +204,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
@@ -160,115 +215,7 @@
CONFIG_TRAD_SIGNALS=y
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -277,12 +224,14 @@
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
@@ -296,8 +245,10 @@
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -341,6 +292,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
#
# IP: Netfilter Configuration
@@ -348,11 +302,15 @@
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -376,9 +334,12 @@
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -395,12 +356,14 @@
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -410,7 +373,7 @@
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -429,11 +392,16 @@
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -456,10 +424,6 @@
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
@@ -479,6 +443,7 @@
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
@@ -489,6 +454,7 @@
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
@@ -496,17 +462,153 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-CONFIG_ETHERTAP=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
@@ -540,6 +642,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -569,18 +673,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -598,6 +690,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -644,11 +746,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -659,10 +764,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -693,7 +808,6 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -707,10 +821,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -723,13 +833,17 @@
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -741,12 +855,14 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
@@ -754,6 +870,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -781,12 +898,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -811,15 +926,20 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -835,6 +955,7 @@
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -908,7 +1029,9 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
@@ -931,6 +1054,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -942,10 +1066,10 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
@@ -955,9 +1079,12 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/galileo-boards/ev96100/setup.c b/arch/mips/galileo-boards/ev96100/setup.c
index 28bd908..78dbb18 100644
--- a/arch/mips/galileo-boards/ev96100/setup.c
+++ b/arch/mips/galileo-boards/ev96100/setup.c
@@ -55,7 +55,7 @@
unsigned char mac_0_1[12];
-static void __init ev96100_setup(void)
+void __init plat_setup(void)
{
unsigned int config = read_c0_config();
unsigned int status = read_c0_status();
@@ -142,8 +142,6 @@
tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
}
-early_initcall(ev96100_setup);
-
unsigned short get_gt_devid(void)
{
u32 gt_devid;
diff --git a/arch/mips/gt64120/ev64120/Kconfig b/arch/mips/gt64120/ev64120/Kconfig
new file mode 100644
index 0000000..d691762
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/Kconfig
@@ -0,0 +1,3 @@
+config EVB_PCI1
+ bool "Enable Second PCI (PCI1)"
+ depends on MIPS_EV64120
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
index dba0961..98b5a96 100644
--- a/arch/mips/gt64120/ev64120/setup.c
+++ b/arch/mips/gt64120/ev64120/setup.c
@@ -69,7 +69,7 @@
*/
extern void gt64120_time_init(void);
-static void __init ev64120_setup(void)
+void __init plat_setup(void)
{
_machine_restart = galileo_machine_restart;
_machine_halt = galileo_machine_halt;
@@ -79,8 +79,6 @@
set_io_port_base(KSEG1);
}
-early_initcall(ev64120_setup);
-
const char *get_system_type(void)
{
return "Galileo EV64120A";
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index d610f8c..0d07c33 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -150,7 +150,7 @@
gt64120_base = 0xe0000000;
}
-static void __init momenco_ocelot_setup(void)
+void __init plat_setup(void)
{
void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
unsigned int tmpword;
@@ -307,8 +307,6 @@
GT_WRITE(GT_DEV_B3_OFS, 0xfef73);
}
-early_initcall(momenco_ocelot_setup);
-
extern int rm7k_tcache_enabled;
/*
* This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
diff --git a/arch/mips/ite-boards/Kconfig b/arch/mips/ite-boards/Kconfig
new file mode 100644
index 0000000..a6d59ad
--- /dev/null
+++ b/arch/mips/ite-boards/Kconfig
@@ -0,0 +1,8 @@
+config IT8172_REVC
+ bool "Support for older IT8172 (Rev C)"
+ depends on MIPS_ITE8172
+ help
+ Say Y here to support the older, Revision C version of the Integrated
+ Technology Express, Inc. ITE8172 SBC. Vendor page at
+ <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c
index cb71b90..e67f961 100644
--- a/arch/mips/ite-boards/generic/irq.c
+++ b/arch/mips/ite-boards/generic/irq.c
@@ -138,14 +138,13 @@
}
static struct hw_interrupt_type it8172_irq_type = {
- "ITE8172",
- startup_ite_irq,
- shutdown_ite_irq,
- enable_it8172_irq,
- disable_it8172_irq,
- mask_and_ack_ite_irq,
- end_ite_irq,
- NULL
+ .typename = "ITE8172",
+ .startup = startup_ite_irq,
+ .shutdown = shutdown_ite_irq,
+ .enable = enable_it8172_irq,
+ .disable = disable_it8172_irq,
+ .ack = mask_and_ack_ite_irq,
+ .end = end_ite_irq,
};
@@ -159,13 +158,13 @@
#define end_none enable_none
static struct hw_interrupt_type cp0_irq_type = {
- "CP0 Count",
- startup_none,
- shutdown_none,
- enable_none,
- disable_none,
- ack_none,
- end_none
+ .typename = "CP0 Count",
+ .startup = startup_none,
+ .shutdown = shutdown_none,
+ .enable = enable_none,
+ .disable = disable_none,
+ .ack = ack_none,
+ .end = end_none
};
void enable_cpu_timer(void)
@@ -182,7 +181,6 @@
int i;
unsigned long flags;
- memset(irq_desc, 0, sizeof(irq_desc));
set_except_vector(0, it8172_IRQ);
/* mask all interrupts */
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
index a5f6d84..062429d 100644
--- a/arch/mips/ite-boards/generic/it8172_setup.c
+++ b/arch/mips/ite-boards/generic/it8172_setup.c
@@ -105,7 +105,7 @@
it8172_resources.ram.end = memsize;
}
-static void __init it8172_setup(void)
+void __init plat_setup(void)
{
unsigned short dsr;
char *argptr;
@@ -251,8 +251,6 @@
#endif /* CONFIG_IT8172_SCR1 */
}
-early_initcall(it8172_setup);
-
#ifdef CONFIG_SERIO_I8042
/*
* According to the ITE Special BIOS Note for waking up the
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
new file mode 100644
index 0000000..1f372b0
--- /dev/null
+++ b/arch/mips/jazz/Kconfig
@@ -0,0 +1,33 @@
+config ACER_PICA_61
+ bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
+ depends on MACH_JAZZ && EXPERIMENTAL
+ select DMA_NONCOHERENT
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
+ kernel that runs on these, say Y here. For details about Linux on
+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+ <http://www.linux-mips.org/>.
+
+config MIPS_MAGNUM_4000
+ bool "Support for MIPS Magnum 4000"
+ depends on MACH_JAZZ
+ select DMA_NONCOHERENT
+ select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This is a machine with a R4000 100 MHz CPU. To compile a Linux
+ kernel that runs on these, say Y here. For details about Linux on
+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+ <http://www.linux-mips.org/>.
+
+config OLIVETTI_M700
+ bool "Support for Olivetti M700-10"
+ depends on MACH_JAZZ
+ select DMA_NONCOHERENT
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This is a machine with a R4000 100 MHz CPU. To compile a Linux
+ kernel that runs on these, say Y here. For details about Linux on
+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+ <http://www.linux-mips.org/>.
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index 0b608fa..b309b1b 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -58,14 +58,13 @@
}
static struct hw_interrupt_type r4030_irq_type = {
- "R4030",
- startup_r4030_irq,
- shutdown_r4030_irq,
- enable_r4030_irq,
- disable_r4030_irq,
- mask_and_ack_r4030_irq,
- end_r4030_irq,
- NULL
+ .typename = "R4030",
+ .startup = startup_r4030_irq,
+ .shutdown = shutdown_r4030_irq,
+ .enable = enable_r4030_irq,
+ .disable = disable_r4030_irq,
+ .ack = mask_and_ack_r4030_irq,
+ .end = end_r4030_irq,
};
void __init init_r4030_ints(void)
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index fccb06f..044df9d 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -50,7 +50,7 @@
{ "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
};
-static void __init jazz_setup(void)
+void __init plat_setup(void)
{
int i;
@@ -97,5 +97,3 @@
vdma_init();
}
-
-early_initcall(jazz_setup);
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
index b9799b8..7cbe144 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/jmr3927/rbhma3100/irq.c
@@ -412,13 +412,13 @@
}
static hw_irq_controller jmr3927_irq_controller = {
- "jmr3927_irq",
- jmr3927_irq_startup,
- jmr3927_irq_shutdown,
- jmr3927_irq_enable,
- jmr3927_irq_disable,
- jmr3927_irq_ack,
- jmr3927_irq_end,
+ .typename = "jmr3927_irq",
+ .startup = jmr3927_irq_startup,
+ .shutdown = jmr3927_irq_shutdown,
+ .enable = jmr3927_irq_enable,
+ .disable = jmr3927_irq_disable,
+ .ack = jmr3927_irq_ack,
+ .end = jmr3927_irq_end,
};
void jmr3927_irq_init(u32 irq_base)
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 32039bb..3e2fbdc 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -44,6 +44,11 @@
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
#include <asm/addrspace.h>
#include <asm/time.h>
@@ -193,7 +198,7 @@
extern struct resource pci_io_resource;
extern struct resource pci_mem_resource;
-static void __init jmr3927_setup(void)
+void __init plat_setup(void)
{
char *argptr;
@@ -211,8 +216,8 @@
*/
ioport_resource.start = pci_io_resource.start;
ioport_resource.end = pci_io_resource.end;
- iomem_resource.start = pci_mem_resource.start;
- iomem_resource.end = pci_mem_resource.end;
+ iomem_resource.start = 0;
+ iomem_resource.end = 0xffffffff;
/* Reboot on panic */
panic_timeout = 180;
@@ -265,18 +270,35 @@
strcat(argptr, " ip=bootp");
}
-#ifdef CONFIG_TXX927_SERIAL_CONSOLE
+#ifdef CONFIG_SERIAL_TXX9
+ {
+ extern int early_serial_txx9_setup(struct uart_port *port);
+ int i;
+ struct uart_port req;
+ for(i = 0; i < 2; i++) {
+ memset(&req, 0, sizeof(req));
+ req.line = i;
+ req.iotype = UPIO_MEM;
+ req.membase = (char *)TX3927_SIO_REG(i);
+ req.mapbase = TX3927_SIO_REG(i);
+ req.irq = i == 0 ?
+ JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
+ if (i == 0)
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ req.uartclk = JMR3927_IMCLK;
+ early_serial_txx9_setup(&req);
+ }
+ }
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "console=")) == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS1,115200");
}
#endif
+#endif
}
-early_initcall(jmr3927_setup);
-
-
static void tx3927_setup(void);
#ifdef CONFIG_PCI
@@ -335,7 +357,7 @@
jmr3927_io_dipsw());
}
-static void __init tx3927_setup(void)
+void __init plat_setup(void)
{
int i;
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d330358..72f2126 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,11 +11,7 @@
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
irix5sys.o sysirix.o
-ifdef CONFIG_MODULES
-obj-y += mips_ksyms.o module.o
-obj-$(CONFIG_32BIT) += module-elf32.o
-obj-$(CONFIG_64BIT) += module-elf64.o
-endif
+obj-$(CONFIG_MODULES) += mips_ksyms.o module.o
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o
@@ -38,12 +34,18 @@
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_MIPS_MT_SMP) += smp_mt.o
+
+obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
+obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+
obj-$(CONFIG_NO_ISA) += dma-no-isa.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o
obj-$(CONFIG_IRQ_MV64340) += irq-mv6434x.o
+obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o
obj-$(CONFIG_32BIT) += scall32-o32.o
obj-$(CONFIG_64BIT) += scall64-64.o
@@ -57,8 +59,6 @@
obj-$(CONFIG_64BIT) += cpu-bugs64.o
-obj-$(CONFIG_GEN_RTC) += genrtc.o
-
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
CFLAGS_ioctl32.o += -Ifs/
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 2c11abb..ca6b03c 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -95,6 +95,7 @@
offset("#define TI_PRE_COUNT ", struct thread_info, preempt_count);
offset("#define TI_ADDR_LIMIT ", struct thread_info, addr_limit);
offset("#define TI_RESTART_BLOCK ", struct thread_info, restart_block);
+ offset("#define TI_TP_VALUE ", struct thread_info, tp_value);
constant("#define _THREAD_SIZE_ORDER ", THREAD_SIZE_ORDER);
constant("#define _THREAD_SIZE ", THREAD_SIZE);
constant("#define _THREAD_MASK ", THREAD_MASK);
@@ -240,6 +241,7 @@
linefeed;
}
+#ifdef CONFIG_32BIT
void output_sc_defines(void)
{
text("/* Linux sigcontext offsets. */");
@@ -251,10 +253,29 @@
offset("#define SC_STATUS ", struct sigcontext, sc_status);
offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
offset("#define SC_FPC_EIR ", struct sigcontext, sc_fpc_eir);
- offset("#define SC_CAUSE ", struct sigcontext, sc_cause);
- offset("#define SC_BADVADDR ", struct sigcontext, sc_badvaddr);
+ offset("#define SC_HI1 ", struct sigcontext, sc_hi1);
+ offset("#define SC_LO1 ", struct sigcontext, sc_lo1);
+ offset("#define SC_HI2 ", struct sigcontext, sc_hi2);
+ offset("#define SC_LO2 ", struct sigcontext, sc_lo2);
+ offset("#define SC_HI3 ", struct sigcontext, sc_hi3);
+ offset("#define SC_LO3 ", struct sigcontext, sc_lo3);
linefeed;
}
+#endif
+
+#ifdef CONFIG_64BIT
+void output_sc_defines(void)
+{
+ text("/* Linux sigcontext offsets. */");
+ offset("#define SC_REGS ", struct sigcontext, sc_regs);
+ offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
+ offset("#define SC_MDHI ", struct sigcontext, sc_hi);
+ offset("#define SC_MDLO ", struct sigcontext, sc_lo);
+ offset("#define SC_PC ", struct sigcontext, sc_pc);
+ offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
+ linefeed;
+}
+#endif
#ifdef CONFIG_MIPS32_COMPAT
void output_sc32_defines(void)
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 6b645fb..d8e2674a1 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -52,7 +52,6 @@
#include <asm/processor.h>
#include <linux/module.h>
-#include <linux/config.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
@@ -116,4 +115,7 @@
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
#include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index b4075e9..cec5f32 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -54,7 +54,6 @@
#include <asm/processor.h>
#include <linux/module.h>
-#include <linux/config.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
@@ -98,7 +97,7 @@
#define init_elf_binfmt init_elf32_binfmt
#define jiffies_to_timeval jiffies_to_compat_timeval
-static __inline__ void
+static inline void
jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
{
/*
@@ -113,21 +112,26 @@
#undef ELF_CORE_COPY_REGS
#define ELF_CORE_COPY_REGS(_dest,_regs) elf32_core_copy_regs(_dest,_regs);
-void elf32_core_copy_regs(elf_gregset_t _dest, struct pt_regs *_regs)
+void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
{
int i;
- memset(_dest, 0, sizeof(elf_gregset_t));
-
- /* XXXKW the 6 is from EF_REG0 in gdb/gdb/mips-linux-tdep.c, include/asm-mips/reg.h */
- for (i=6; i<38; i++)
- _dest[i] = (elf_greg_t) _regs->regs[i-6];
- _dest[i++] = (elf_greg_t) _regs->lo;
- _dest[i++] = (elf_greg_t) _regs->hi;
- _dest[i++] = (elf_greg_t) _regs->cp0_epc;
- _dest[i++] = (elf_greg_t) _regs->cp0_badvaddr;
- _dest[i++] = (elf_greg_t) _regs->cp0_status;
- _dest[i++] = (elf_greg_t) _regs->cp0_cause;
+ for (i = 0; i < EF_R0; i++)
+ grp[i] = 0;
+ grp[EF_R0] = 0;
+ for (i = 1; i <= 31; i++)
+ grp[EF_R0 + i] = (elf_greg_t) regs->regs[i];
+ grp[EF_R26] = 0;
+ grp[EF_R27] = 0;
+ grp[EF_LO] = (elf_greg_t) regs->lo;
+ grp[EF_HI] = (elf_greg_t) regs->hi;
+ grp[EF_CP0_EPC] = (elf_greg_t) regs->cp0_epc;
+ grp[EF_CP0_BADVADDR] = (elf_greg_t) regs->cp0_badvaddr;
+ grp[EF_CP0_STATUS] = (elf_greg_t) regs->cp0_status;
+ grp[EF_CP0_CAUSE] = (elf_greg_t) regs->cp0_cause;
+#ifdef EF_UNUSED0
+ grp[EF_UNUSED0] = 0;
+#endif
}
MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
@@ -136,4 +140,7 @@
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
#include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 01117e9..374de83 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -12,6 +12,7 @@
#include <asm/branch.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
+#include <asm/fpu.h>
#include <asm/inst.h>
#include <asm/ptrace.h>
#include <asm/uaccess.h>
@@ -21,7 +22,7 @@
*/
int __compute_return_epc(struct pt_regs *regs)
{
- unsigned int *addr, bit, fcr31;
+ unsigned int *addr, bit, fcr31, dspcontrol;
long epc;
union mips_instruction insn;
@@ -98,6 +99,18 @@
epc += 8;
regs->cp0_epc = epc;
break;
+ case bposge32_op:
+ if (!cpu_has_dsp)
+ goto sigill;
+
+ dspcontrol = rddsp(0x01);
+
+ if (dspcontrol >= 32) {
+ epc = epc + 4 + (insn.i_format.simmediate << 2);
+ } else
+ epc += 8;
+ regs->cp0_epc = epc;
+ break;
}
break;
@@ -161,10 +174,13 @@
* And now the FPA/cp1 branch instructions.
*/
case cop1_op:
- if (!cpu_has_fpu)
- fcr31 = current->thread.fpu.soft.fcr31;
- else
+ preempt_disable();
+ if (is_fpu_owner())
asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+ else
+ fcr31 = current->thread.fpu.hard.fcr31;
+ preempt_enable();
+
bit = (insn.i_format.rt >> 2);
bit += (bit != 0);
bit += 23;
@@ -196,4 +212,9 @@
printk("%s: unaligned epc - sending SIGBUS.\n", current->comm);
force_sig(SIGBUS, current);
return -EFAULT;
+
+sigill:
+ printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm);
+ force_sig(SIGBUS, current);
+ return -EFAULT;
}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 7685f8b..a263fb7 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -2,9 +2,9 @@
* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
- * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
* Copyright (C) 1994 - 2003 Ralf Baechle
- * Copyright (C) 2001 MIPS Inc.
+ * Copyright (C) 2001, 2004 MIPS Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -17,7 +17,6 @@
#include <linux/ptrace.h>
#include <linux/stddef.h>
-#include <asm/bugs.h>
#include <asm/cpu.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
@@ -51,36 +50,48 @@
".set\tmips0");
}
-/*
- * The Au1xxx wait is available only if we run CONFIG_PM and
- * the timer setup found we had a 32KHz counter available.
- * There are still problems with functions that may call au1k_wait
- * directly, but that will be discovered pretty quickly.
- */
-extern void (*au1k_wait_ptr)(void);
+/* The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter. */
+int allow_au1k_wait;
-void au1k_wait(void)
+static void au1k_wait(void)
{
-#ifdef CONFIG_PM
/* using the wait instruction makes CP0 counter unusable */
- __asm__(".set\tmips3\n\t"
+ __asm__(".set mips3\n\t"
+ "cache 0x14, 0(%0)\n\t"
+ "cache 0x14, 32(%0)\n\t"
+ "sync\n\t"
+ "nop\n\t"
"wait\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
- ".set\tmips0");
-#else
- __asm__("nop\n\t"
- "nop");
-#endif
+ ".set mips0\n\t"
+ : : "r" (au1k_wait));
}
+static int __initdata nowait = 0;
+
+int __init wait_disable(char *s)
+{
+ nowait = 1;
+
+ return 1;
+}
+
+__setup("nowait", wait_disable);
+
static inline void check_wait(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
printk("Checking for 'wait' instruction... ");
+ if (nowait) {
+ printk (" disabled.\n");
+ return;
+ }
+
switch (c->cputype) {
case CPU_R3081:
case CPU_R3081E:
@@ -109,22 +120,22 @@
/* case CPU_20KC:*/
case CPU_24K:
case CPU_25KF:
+ case CPU_34K:
+ case CPU_PR4450:
cpu_wait = r4k_wait;
printk(" available.\n");
break;
-#ifdef CONFIG_PM
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
- if (au1k_wait_ptr != NULL) {
- cpu_wait = au1k_wait_ptr;
+ case CPU_AU1550:
+ case CPU_AU1200:
+ if (allow_au1k_wait) {
+ cpu_wait = au1k_wait;
printk(" available.\n");
- }
- else {
+ } else
printk(" unavailable.\n");
- }
break;
-#endif
default:
printk(" unavailable.\n");
break;
@@ -180,7 +191,7 @@
return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
}
-#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4KTLB \
+#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
@@ -189,7 +200,8 @@
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+ MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
@@ -203,7 +215,8 @@
else
c->cputype = CPU_R3000;
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+ MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
@@ -266,7 +279,8 @@
case PRID_IMP_R4600:
c->cputype = CPU_R4600;
c->isa_level = MIPS_CPU_ISA_III;
- c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
+ c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
#if 0
@@ -285,7 +299,7 @@
#endif
case PRID_IMP_TX39:
c->isa_level = MIPS_CPU_ISA_I;
- c->options = MIPS_CPU_TLB;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
c->cputype = CPU_TX3927;
@@ -421,74 +435,147 @@
}
}
-static inline void decode_config1(struct cpuinfo_mips *c)
+static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
- unsigned long config0 = read_c0_config();
- unsigned long config1;
+ unsigned int config0;
+ int isa;
- if ((config0 & (1 << 31)) == 0)
- return; /* actually wort a panic() */
+ config0 = read_c0_config();
- /* MIPS32 or MIPS64 compliant CPU. Read Config 1 register. */
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
- MIPS_CPU_4KTLB | MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
- MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+ if (((config0 & MIPS_CONF_MT) >> 7) == 1)
+ c->options |= MIPS_CPU_TLB;
+ isa = (config0 & MIPS_CONF_AT) >> 13;
+ switch (isa) {
+ case 0:
+ c->isa_level = MIPS_CPU_ISA_M32;
+ break;
+ case 2:
+ c->isa_level = MIPS_CPU_ISA_M64;
+ break;
+ default:
+ panic("Unsupported ISA type, cp0.config0.at: %d.", isa);
+ }
+
+ return config0 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config1(struct cpuinfo_mips *c)
+{
+ unsigned int config1;
+
config1 = read_c0_config1();
- if (config1 & (1 << 3))
+
+ if (config1 & MIPS_CONF1_MD)
+ c->ases |= MIPS_ASE_MDMX;
+ if (config1 & MIPS_CONF1_WR)
c->options |= MIPS_CPU_WATCH;
- if (config1 & (1 << 2))
- c->options |= MIPS_CPU_MIPS16;
- if (config1 & (1 << 1))
+ if (config1 & MIPS_CONF1_CA)
+ c->ases |= MIPS_ASE_MIPS16;
+ if (config1 & MIPS_CONF1_EP)
c->options |= MIPS_CPU_EJTAG;
- if (config1 & 1) {
+ if (config1 & MIPS_CONF1_FP) {
c->options |= MIPS_CPU_FPU;
c->options |= MIPS_CPU_32FPR;
}
+ if (cpu_has_tlb)
+ c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
+
+ return config1 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config2(struct cpuinfo_mips *c)
+{
+ unsigned int config2;
+
+ config2 = read_c0_config2();
+
+ if (config2 & MIPS_CONF2_SL)
+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+ return config2 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config3(struct cpuinfo_mips *c)
+{
+ unsigned int config3;
+
+ config3 = read_c0_config3();
+
+ if (config3 & MIPS_CONF3_SM)
+ c->ases |= MIPS_ASE_SMARTMIPS;
+ if (config3 & MIPS_CONF3_DSP)
+ c->ases |= MIPS_ASE_DSP;
+ if (config3 & MIPS_CONF3_VINT)
+ c->options |= MIPS_CPU_VINT;
+ if (config3 & MIPS_CONF3_VEIC)
+ c->options |= MIPS_CPU_VEIC;
+ if (config3 & MIPS_CONF3_MT)
+ c->ases |= MIPS_ASE_MIPSMT;
+
+ return config3 & MIPS_CONF_M;
+}
+
+static inline void decode_configs(struct cpuinfo_mips *c)
+{
+ /* MIPS32 or MIPS64 compliant CPU. */
+ c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
+ MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
- c->tlbsize = ((config1 >> 25) & 0x3f) + 1;
+ /* Read Config registers. */
+ if (!decode_config0(c))
+ return; /* actually worth a panic() */
+ if (!decode_config1(c))
+ return;
+ if (!decode_config2(c))
+ return;
+ if (!decode_config3(c))
+ return;
}
static inline void cpu_probe_mips(struct cpuinfo_mips *c)
{
- decode_config1(c);
+ decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
- c->isa_level = MIPS_CPU_ISA_M32;
break;
case PRID_IMP_4KEC:
c->cputype = CPU_4KEC;
- c->isa_level = MIPS_CPU_ISA_M32;
+ break;
+ case PRID_IMP_4KECR2:
+ c->cputype = CPU_4KEC;
break;
case PRID_IMP_4KSC:
+ case PRID_IMP_4KSD:
c->cputype = CPU_4KSC;
- c->isa_level = MIPS_CPU_ISA_M32;
break;
case PRID_IMP_5KC:
c->cputype = CPU_5KC;
- c->isa_level = MIPS_CPU_ISA_M64;
break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
- c->isa_level = MIPS_CPU_ISA_M64;
break;
case PRID_IMP_24K:
+ case PRID_IMP_24KE:
c->cputype = CPU_24K;
- c->isa_level = MIPS_CPU_ISA_M32;
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
- c->isa_level = MIPS_CPU_ISA_M64;
/* Probe for L2 cache */
c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
break;
+ case PRID_IMP_34K:
+ c->cputype = CPU_34K;
+ c->isa_level = MIPS_CPU_ISA_M32;
+ break;
}
}
static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
{
- decode_config1(c);
+ decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_AU1_REV1:
case PRID_IMP_AU1_REV2:
@@ -505,50 +592,70 @@
case 3:
c->cputype = CPU_AU1550;
break;
+ case 4:
+ c->cputype = CPU_AU1200;
+ break;
default:
panic("Unknown Au Core!");
break;
}
- c->isa_level = MIPS_CPU_ISA_M32;
break;
}
}
static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
{
- decode_config1(c);
+ decode_configs(c);
+
+ /*
+ * For historical reasons the SB1 comes with it's own variant of
+ * cache code which eventually will be folded into c-r4k.c. Until
+ * then we pretend it's got it's own cache architecture.
+ */
+ c->options &= ~MIPS_CPU_4K_CACHE;
+ c->options |= MIPS_CPU_SB1_CACHE;
+
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
- c->isa_level = MIPS_CPU_ISA_M64;
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
- MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
- MIPS_CPU_MCHECK | MIPS_CPU_EJTAG |
- MIPS_CPU_WATCH | MIPS_CPU_LLSC;
-#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
+#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
/* FPU in pass1 is known to have issues. */
- c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
+ c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
#endif
break;
+ case PRID_IMP_SB1A:
+ c->cputype = CPU_SB1A;
+ break;
}
}
static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
{
- decode_config1(c);
+ decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
- c->isa_level = MIPS_CPU_ISA_M64;
- c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
- MIPS_CPU_4KTLB | MIPS_CPU_FPU |
- MIPS_CPU_COUNTER | MIPS_CPU_MCHECK;
c->scache.ways = 8;
c->tlbsize = 64;
break;
}
}
+static inline void cpu_probe_philips(struct cpuinfo_mips *c)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_PR4450:
+ c->cputype = CPU_PR4450;
+ c->isa_level = MIPS_CPU_ISA_M32;
+ break;
+ default:
+ panic("Unknown Philips Core!"); /* REVISIT: die? */
+ break;
+ }
+}
+
+
__init void cpu_probe(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
@@ -571,15 +678,24 @@
case PRID_COMP_SIBYTE:
cpu_probe_sibyte(c);
break;
-
case PRID_COMP_SANDCRAFT:
cpu_probe_sandcraft(c);
break;
+ case PRID_COMP_PHILIPS:
+ cpu_probe_philips(c);
+ break;
default:
c->cputype = CPU_UNKNOWN;
}
- if (c->options & MIPS_CPU_FPU)
+ if (c->options & MIPS_CPU_FPU) {
c->fpu_id = cpu_get_fpu_id();
+
+ if (c->isa_level == MIPS_CPU_ISA_M32 ||
+ c->isa_level == MIPS_CPU_ISA_M64) {
+ if (c->fpu_id & MIPS_FPIR_3D)
+ c->ases |= MIPS_ASE_MIPS3D;
+ }
+ }
}
__init void cpu_report(void)
diff --git a/arch/mips/kernel/dma-no-isa.c b/arch/mips/kernel/dma-no-isa.c
new file mode 100644
index 0000000..6df8b07
--- /dev/null
+++ b/arch/mips/kernel/dma-no-isa.c
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * Dummy ISA DMA functions for systems that don't have ISA but share drivers
+ * with ISA such as legacy free PCI.
+ */
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(dma_spin_lock);
+
+int request_dma(unsigned int dmanr, const char * device_id)
+{
+ return -EINVAL;
+}
+
+void free_dma(unsigned int dmanr)
+{
+}
+
+EXPORT_SYMBOL(dma_spin_lock);
+EXPORT_SYMBOL(request_dma);
+EXPORT_SYMBOL(free_dma);
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index 5eb4291..83c87fe 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -19,11 +19,11 @@
#include <asm/war.h>
#ifdef CONFIG_PREEMPT
- .macro preempt_stop reg=t0
+ .macro preempt_stop
.endm
#else
- .macro preempt_stop reg=t0
- local_irq_disable \reg
+ .macro preempt_stop
+ local_irq_disable
.endm
#define resume_kernel restore_all
#endif
@@ -37,17 +37,18 @@
andi t0, t0, KU_USER
beqz t0, resume_kernel
-FEXPORT(resume_userspace)
- local_irq_disable t0 # make sure we dont miss an
+resume_userspace:
+ local_irq_disable # make sure we dont miss an
# interrupt setting need_resched
# between sampling and return
LONG_L a2, TI_FLAGS($28) # current->work
- andi a2, _TIF_WORK_MASK # (ignoring syscall_trace)
- bnez a2, work_pending
+ andi t0, a2, _TIF_WORK_MASK # (ignoring syscall_trace)
+ bnez t0, work_pending
j restore_all
#ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
+resume_kernel:
+ local_irq_disable
lw t0, TI_PRE_COUNT($28)
bnez t0, restore_all
need_resched:
@@ -57,12 +58,7 @@
LONG_L t0, PT_STATUS(sp) # Interrupts off?
andi t0, 1
beqz t0, restore_all
- li t0, PREEMPT_ACTIVE
- sw t0, TI_PRE_COUNT($28)
- local_irq_enable t0
- jal schedule
- sw zero, TI_PRE_COUNT($28)
- local_irq_disable t0
+ jal preempt_schedule_irq
b need_resched
#endif
@@ -88,13 +84,13 @@
RESTORE_SP_AND_RET
.set at
-FEXPORT(work_pending)
- andi t0, a2, _TIF_NEED_RESCHED
+work_pending:
+ andi t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS
beqz t0, work_notifysig
work_resched:
jal schedule
- local_irq_disable t0 # make sure need_resched and
+ local_irq_disable # make sure need_resched and
# signals dont change between
# sampling and return
LONG_L a2, TI_FLAGS($28)
@@ -109,15 +105,14 @@
move a0, sp
li a1, 0
jal do_notify_resume # a2 already loaded
- j restore_all
+ j resume_userspace
FEXPORT(syscall_exit_work_partial)
SAVE_STATIC
-FEXPORT(syscall_exit_work)
- LONG_L t0, TI_FLAGS($28)
- li t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
- and t0, t1
- beqz t0, work_pending # trace bit is set
+syscall_exit_work:
+ li t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+ and t0, a2 # a2 is preloaded with TI_FLAGS
+ beqz t0, work_pending # trace bit set?
local_irq_enable # could let do_syscall_trace()
# call schedule() instead
move a0, sp
@@ -128,28 +123,25 @@
/*
* Common spurious interrupt handler.
*/
- .text
- .align 5
LEAF(spurious_interrupt)
/*
* Someone tried to fool us by sending an interrupt but we
* couldn't find a cause for it.
*/
+ PTR_LA t1, irq_err_count
#ifdef CONFIG_SMP
- lui t1, %hi(irq_err_count)
-1: ll t0, %lo(irq_err_count)(t1)
+1: ll t0, (t1)
addiu t0, 1
- sc t0, %lo(irq_err_count)(t1)
+ sc t0, (t1)
#if R10000_LLSC_WAR
beqzl t0, 1b
#else
beqz t0, 1b
#endif
#else
- lui t1, %hi(irq_err_count)
- lw t0, %lo(irq_err_count)(t1)
+ lw t0, (t1)
addiu t0, 1
- sw t0, %lo(irq_err_count)(t1)
+ sw t0, (t1)
#endif
j ret_from_irq
END(spurious_interrupt)
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 512bedb..83b8986 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -52,16 +52,15 @@
/*
* Called from user mode, go somewhere else.
*/
- lui k1, %hi(saved_vectors)
mfc0 k0, CP0_CAUSE
andi k0, k0, 0x7c
add k1, k1, k0
- lw k0, %lo(saved_vectors)(k1)
+ PTR_L k0, saved_vectors(k1)
jr k0
nop
1:
move k0, sp
- subu sp, k1, GDB_FR_SIZE*2 # see comment above
+ PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above
LONG_S k0, GDB_FR_REG29(sp)
LONG_S $2, GDB_FR_REG2(sp)
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index d3fd1ab..96d18c4 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -176,8 +176,10 @@
/*
* spin locks for smp case
*/
-static spinlock_t kgdb_lock = SPIN_LOCK_UNLOCKED;
-static spinlock_t kgdb_cpulock[NR_CPUS] = { [0 ... NR_CPUS-1] = SPIN_LOCK_UNLOCKED};
+static DEFINE_SPINLOCK(kgdb_lock);
+static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
+ [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED;
+};
/*
* BUFMAX defines the maximum number of characters in inbound/outbound buffers
@@ -637,29 +639,32 @@
* and only one can be active at a time.
*/
extern spinlock_t smp_call_lock;
+
void set_async_breakpoint(unsigned long *epc)
{
/* skip breaking into userland */
if ((*epc & 0x80000000) == 0)
return;
+#ifdef CONFIG_SMP
/* avoid deadlock if someone is make IPC */
if (spin_is_locked(&smp_call_lock))
return;
+#endif
async_bp.addr = *epc;
*epc = (unsigned long)async_breakpoint;
}
-void kgdb_wait(void *arg)
+static void kgdb_wait(void *arg)
{
unsigned flags;
int cpu = smp_processor_id();
local_irq_save(flags);
- spin_lock(&kgdb_cpulock[cpu]);
- spin_unlock(&kgdb_cpulock[cpu]);
+ __raw_spin_lock(&kgdb_cpulock[cpu]);
+ __raw_spin_unlock(&kgdb_cpulock[cpu]);
local_irq_restore(flags);
}
@@ -707,7 +712,7 @@
* acquire the CPU spinlocks
*/
for (i = num_online_cpus()-1; i >= 0; i--)
- if (spin_trylock(&kgdb_cpulock[i]) == 0)
+ if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
panic("kgdb: couldn't get cpulock %d\n", i);
/*
@@ -982,7 +987,7 @@
exit_kgdb_exception:
/* release locks so other CPUs can go */
for (i = num_online_cpus()-1; i >= 0; i--)
- spin_unlock(&kgdb_cpulock[i]);
+ __raw_spin_unlock(&kgdb_cpulock[i]);
spin_unlock(&kgdb_lock);
__flush_cache_all();
@@ -1036,12 +1041,12 @@
* malloc is needed by gdb client in "call func()", even a private one
* will make gdb happy
*/
-static void *malloc(size_t size)
+static void * __attribute_used__ malloc(size_t size)
{
return kmalloc(size, GFP_ATOMIC);
}
-static void free(void *where)
+static void __attribute_used__ free (void *where)
{
kfree(where);
}
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index e7f6c1b..aa18a8b 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -82,7 +82,7 @@
li k0, 14<<2
beq k1, k0, handle_vcei
#ifdef CONFIG_64BIT
- dsll k1, k1, 1
+ dsll k1, k1, 1
#endif
.set pop
PTR_L k0, exception_handlers(k1)
@@ -90,17 +90,17 @@
/*
* Big shit, we now may have two dirty primary cache lines for the same
- * physical address. We can savely invalidate the line pointed to by
+ * physical address. We can safely invalidate the line pointed to by
* c0_badvaddr because after return from this exception handler the
* load / store will be re-executed.
*/
handle_vced:
- DMFC0 k0, CP0_BADVADDR
+ MFC0 k0, CP0_BADVADDR
li k1, -4 # Is this ...
and k0, k1 # ... really needed?
mtc0 zero, CP0_TAGLO
- cache Index_Store_Tag_D,(k0)
- cache Hit_Writeback_Inv_SD,(k0)
+ cache Index_Store_Tag_D, (k0)
+ cache Hit_Writeback_Inv_SD, (k0)
#ifdef CONFIG_PROC_FS
PTR_LA k0, vced_count
lw k1, (k0)
@@ -148,6 +148,38 @@
__FINIT
/*
+ * Vectored interrupt handler.
+ * This prototype is copied to ebase + n*IntCtl.VS and patched
+ * to invoke the handler
+ */
+NESTED(except_vec_vi, 0, sp)
+ SAVE_SOME
+ SAVE_AT
+ .set push
+ .set noreorder
+EXPORT(except_vec_vi_lui)
+ lui v0, 0 /* Patched */
+ j except_vec_vi_handler
+EXPORT(except_vec_vi_ori)
+ ori v0, 0 /* Patched */
+ .set pop
+ END(except_vec_vi)
+EXPORT(except_vec_vi_end)
+
+/*
+ * Common Vectored Interrupt code
+ * Complete the register saves and invoke the handler which is passed in $v0
+ */
+NESTED(except_vec_vi_handler, 0, sp)
+ SAVE_TEMP
+ SAVE_STATIC
+ CLI
+ move a0, sp
+ jalr v0
+ j ret_from_irq
+ END(except_vec_vi_handler)
+
+/*
* EJTAG debug exception handler.
*/
NESTED(ejtag_debug_handler, PT_SIZE, sp)
@@ -291,6 +323,8 @@
BUILD_HANDLER mdmx mdmx sti silent /* #22 */
BUILD_HANDLER watch watch sti verbose /* #23 */
BUILD_HANDLER mcheck mcheck cli verbose /* #24 */
+ BUILD_HANDLER mt mt sti verbose /* #25 */
+ BUILD_HANDLER dsp dsp sti silent /* #26 */
BUILD_HANDLER reserved reserved sti verbose /* others */
#ifdef CONFIG_64BIT
diff --git a/arch/mips/kernel/genrtc.c b/arch/mips/kernel/genrtc.c
deleted file mode 100644
index 71416e7..0000000
--- a/arch/mips/kernel/genrtc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * A glue layer that provides RTC read/write to drivers/char/genrtc.c driver
- * based on MIPS internal RTC routines. It does take care locking
- * issues so that we are SMP/Preemption safe.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Please read the COPYING file for all license details.
- */
-
-#include <linux/spinlock.h>
-
-#include <asm/rtc.h>
-#include <asm/time.h>
-
-static DEFINE_SPINLOCK(mips_rtc_lock);
-
-unsigned int get_rtc_time(struct rtc_time *time)
-{
- unsigned long nowtime;
-
- spin_lock(&mips_rtc_lock);
- nowtime = rtc_get_time();
- to_tm(nowtime, time);
- time->tm_year -= 1900;
- spin_unlock(&mips_rtc_lock);
-
- return RTC_24H;
-}
-
-int set_rtc_time(struct rtc_time *time)
-{
- unsigned long nowtime;
- int ret;
-
- spin_lock(&mips_rtc_lock);
- nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
- time->tm_mday, time->tm_hour, time->tm_min,
- time->tm_sec);
- ret = rtc_set_time(nowtime);
- spin_unlock(&mips_rtc_lock);
-
- return ret;
-}
-
-unsigned int get_rtc_ss(void)
-{
- struct rtc_time h;
-
- get_rtc_time(&h);
- return h.tm_sec;
-}
-
-int get_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-
-int set_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 2a1b45d..2e9122a 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,11 +22,8 @@
#include <asm/page.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
-#ifdef CONFIG_SGI_IP27
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hubni.h>
-#include <asm/sn/klkernvars.h>
-#endif
+
+#include <kernel-entry-init.h>
.macro ARC64_TWIDDLE_PC
#if defined(CONFIG_ARC64) || defined(CONFIG_MAPPED_KERNEL)
@@ -38,18 +35,6 @@
#endif
.endm
-#ifdef CONFIG_SGI_IP27
- /*
- * outputs the local nasid into res. IP27 stuff.
- */
- .macro GET_NASID_ASM res
- dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
- ld \res, (\res)
- and \res, NSRI_NODEID_MASK
- dsrl \res, NSRI_NODEID_SHFT
- .endm
-#endif /* CONFIG_SGI_IP27 */
-
/*
* inputs are the text nasid in t1, data nasid in t2.
*/
@@ -131,16 +116,21 @@
EXPORT(stext) # used for profiling
EXPORT(_stext)
+#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM)
+ /*
+ * Give us a fighting chance of running if execution beings at the
+ * kernel load address. This is needed because this platform does
+ * not have a ELF loader yet.
+ */
+ j kernel_entry
+#endif
__INIT
NESTED(kernel_entry, 16, sp) # kernel entry point
- setup_c0_status_pri
-#ifdef CONFIG_SGI_IP27
- GET_NASID_ASM t1
- move t2, t1 # text and data are here
- MAPPED_KERNEL_SETUP_TLB
-#endif /* IP27 */
+ kernel_entry_setup # cpu specific setup
+
+ setup_c0_status_pri
ARC64_TWIDDLE_PC
@@ -157,6 +147,7 @@
LONG_S a2, fw_arg2
LONG_S a3, fw_arg3
+ MTC0 zero, CP0_CONTEXT # clear context register
PTR_LA $28, init_thread_union
PTR_ADDIU sp, $28, _THREAD_SIZE - 32
set_saved_sp sp, t0, t1
@@ -165,6 +156,10 @@
j start_kernel
END(kernel_entry)
+#ifdef CONFIG_QEMU
+ __INIT
+#endif
+
#ifdef CONFIG_SMP
/*
* SMP slave cpus entry point. Board specific code for bootstrap calls this
@@ -172,20 +167,7 @@
*/
NESTED(smp_bootstrap, 16, sp)
setup_c0_status_sec
-
-#ifdef CONFIG_SGI_IP27
- GET_NASID_ASM t1
- dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
- KLDIR_OFF_POINTER + CAC_BASE
- dsll t1, NASID_SHFT
- or t0, t0, t1
- ld t0, 0(t0) # t0 points to kern_vars struct
- lh t1, KV_RO_NASID_OFFSET(t0)
- lh t2, KV_RW_NASID_OFFSET(t0)
- MAPPED_KERNEL_SETUP_TLB
- ARC64_TWIDDLE_PC
-#endif /* CONFIG_SGI_IP27 */
-
+ smp_slave_setup
j start_secondary
END(smp_bootstrap)
#endif /* CONFIG_SMP */
@@ -200,19 +182,13 @@
.comm fw_arg2, SZREG, SZREG
.comm fw_arg3, SZREG, SZREG
- .macro page name, order=0
- .globl \name
-\name: .size \name, (_PAGE_SIZE << \order)
- .org . + (_PAGE_SIZE << \order)
- .type \name, @object
+ .macro page name, order
+ .comm \name, (_PAGE_SIZE << \order), (_PAGE_SIZE << \order)
.endm
- .data
- .align PAGE_SHIFT
-
/*
- * ... but on 64-bit we've got three-level pagetables with a
- * slightly different layout ...
+ * On 64-bit we've got three-level pagetables with a slightly
+ * different layout ...
*/
page swapper_pg_dir, _PGD_ORDER
#ifdef CONFIG_64BIT
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 4477592..b974ac9 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -31,7 +31,7 @@
* moves to arch independent land
*/
-spinlock_t DEFINE_SPINLOCK(i8259A_lock);
+DEFINE_SPINLOCK(i8259A_lock);
static void end_8259A_irq (unsigned int irq)
{
@@ -52,14 +52,13 @@
}
static struct hw_interrupt_type i8259A_irq_type = {
- "XT-PIC",
- startup_8259A_irq,
- shutdown_8259A_irq,
- enable_8259A_irq,
- disable_8259A_irq,
- mask_and_ack_8259A,
- end_8259A_irq,
- NULL
+ .typename = "XT-PIC",
+ .startup = startup_8259A_irq,
+ .shutdown = shutdown_8259A_irq,
+ .enable = enable_8259A_irq,
+ .disable = disable_8259A_irq,
+ .ack = mask_and_ack_8259A,
+ .end = end_8259A_irq,
};
/*
@@ -308,7 +307,7 @@
/*
* On systems with i8259-style interrupt controllers we assume for
- * driver compatibility reasons interrupts 0 - 15 to be the i8295
+ * driver compatibility reasons interrupts 0 - 15 to be the i8259
* interrupts even if the hardware uses a different interrupt numbering.
*/
void __init init_i8259_irqs (void)
@@ -322,7 +321,7 @@
for (i = 0; i < 16; i++) {
irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
+ irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].handler = &i8259A_irq_type;
}
diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c
index c069719..ed9b2da 100644
--- a/arch/mips/kernel/ioctl32.c
+++ b/arch/mips/kernel/ioctl32.c
@@ -41,12 +41,6 @@
#define DECLARES
#include "compat_ioctl.c"
-#ifdef CONFIG_SIBYTE_TBPROF
-COMPATIBLE_IOCTL(SBPROF_ZBSTART)
-COMPATIBLE_IOCTL(SBPROF_ZBSTOP)
-COMPATIBLE_IOCTL(SBPROF_ZBWAITFULL)
-#endif /* CONFIG_SIBYTE_TBPROF */
-
/*HANDLE_IOCTL(RTC_IRQP_READ, w_long)
COMPATIBLE_IOCTL(RTC_IRQP_SET)
HANDLE_IOCTL(RTC_EPOCH_READ, w_long)
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 4af20cd..10d3644 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -8,7 +8,7 @@
*
* Copyright (C) 1993 - 1994 Eric Youngdale <ericy@cais.com>
* Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 Steven J. Hill <sjhill@realitydiluted.com>
+ * Copyright (C) 2004 - 2005 Steven J. Hill <sjhill@realitydiluted.com>
*/
#include <linux/module.h>
#include <linux/fs.h>
@@ -31,15 +31,16 @@
#include <linux/elfcore.h>
#include <linux/smp_lock.h>
-#include <asm/uaccess.h>
#include <asm/mipsregs.h>
+#include <asm/namei.h>
#include <asm/prctl.h>
+#include <asm/uaccess.h>
#define DLINFO_ITEMS 12
#include <linux/elf.h>
-#undef DEBUG_ELF
+#undef DEBUG
static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs);
static int load_irix_library(struct file *);
@@ -55,7 +56,7 @@
#define elf_addr_t unsigned long
#endif
-#ifdef DEBUG_ELF
+#ifdef DEBUG
/* Debugging routines. */
static char *get_elf_p_type(Elf32_Word p_type)
{
@@ -120,7 +121,7 @@
print_phdr(i, ep);
}
}
-#endif /* (DEBUG_ELF) */
+#endif /* DEBUG */
static void set_brk(unsigned long start, unsigned long end)
{
@@ -146,20 +147,20 @@
nbyte = elf_bss & (PAGE_SIZE-1);
if (nbyte) {
nbyte = PAGE_SIZE - nbyte;
- clear_user((void *) elf_bss, nbyte);
+ clear_user((void __user *) elf_bss, nbyte);
}
}
-unsigned long * create_irix_tables(char * p, int argc, int envc,
- struct elfhdr * exec, unsigned int load_addr,
- unsigned int interp_load_addr,
- struct pt_regs *regs, struct elf_phdr *ephdr)
+static unsigned long * create_irix_tables(char * p, int argc, int envc,
+ struct elfhdr * exec, unsigned int load_addr,
+ unsigned int interp_load_addr, struct pt_regs *regs,
+ struct elf_phdr *ephdr)
{
elf_addr_t *argv;
elf_addr_t *envp;
elf_addr_t *sp, *csp;
-#ifdef DEBUG_ELF
+#ifdef DEBUG
printk("create_irix_tables: p[%p] argc[%d] envc[%d] "
"load_addr[%08x] interp_load_addr[%08x]\n",
p, argc, envc, load_addr, interp_load_addr);
@@ -248,14 +249,13 @@
last_bss = 0;
error = load_addr = 0;
-#ifdef DEBUG_ELF
+#ifdef DEBUG
print_elfhdr(interp_elf_ex);
#endif
/* First of all, some simple consistency checks */
if ((interp_elf_ex->e_type != ET_EXEC &&
interp_elf_ex->e_type != ET_DYN) ||
- !irix_elf_check_arch(interp_elf_ex) ||
!interpreter->f_op->mmap) {
printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type);
return 0xffffffff;
@@ -290,7 +290,7 @@
(char *) elf_phdata,
sizeof(struct elf_phdr) * interp_elf_ex->e_phnum);
-#ifdef DEBUG_ELF
+#ifdef DEBUG
dump_phdrs(elf_phdata, interp_elf_ex->e_phnum);
#endif
@@ -306,13 +306,11 @@
elf_type |= MAP_FIXED;
vaddr = eppnt->p_vaddr;
-#ifdef DEBUG_ELF
- printk("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
+ pr_debug("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
interpreter, vaddr,
(unsigned long) (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
(unsigned long) elf_prot, (unsigned long) elf_type,
(unsigned long) (eppnt->p_offset & 0xfffff000));
-#endif
down_write(¤t->mm->mmap_sem);
error = do_mmap(interpreter, vaddr,
eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
@@ -324,14 +322,10 @@
printk("Aieee IRIX interp mmap error=%d\n", error);
break; /* Real error */
}
-#ifdef DEBUG_ELF
- printk("error=%08lx ", (unsigned long) error);
-#endif
+ pr_debug("error=%08lx ", (unsigned long) error);
if(!load_addr && interp_elf_ex->e_type == ET_DYN) {
load_addr = error;
-#ifdef DEBUG_ELF
- printk("load_addr = error ");
-#endif
+ pr_debug("load_addr = error ");
}
/* Find the end of the file mapping for this phdr, and keep
@@ -345,17 +339,13 @@
*/
k = eppnt->p_memsz + eppnt->p_vaddr;
if(k > last_bss) last_bss = k;
-#ifdef DEBUG_ELF
- printk("\n");
-#endif
+ pr_debug("\n");
}
}
/* Now use mmap to map the library into memory. */
if(error < 0 && error > -1024) {
-#ifdef DEBUG_ELF
- printk("got error %d\n", error);
-#endif
+ pr_debug("got error %d\n", error);
kfree(elf_phdata);
return 0xffffffff;
}
@@ -365,16 +355,12 @@
* that there are zero-mapped pages up to and including the
* last bss page.
*/
-#ifdef DEBUG_ELF
- printk("padzero(%08lx) ", (unsigned long) (elf_bss));
-#endif
+ pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss));
padzero(elf_bss);
len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */
-#ifdef DEBUG_ELF
- printk("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
- (unsigned long) len);
-#endif
+ pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
+ (unsigned long) len);
/* Map the last of the bss segment */
if (last_bss > len) {
@@ -396,12 +382,7 @@
/* First of all, some simple consistency checks */
if((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
- !irix_elf_check_arch(ehp) || !bprm->file->f_op->mmap) {
- return -ENOEXEC;
- }
-
- /* Only support MIPS ARCH2 or greater IRIX binaries for now. */
- if(!(ehp->e_flags & EF_MIPS_ARCH) && !(ehp->e_flags & 0x04)) {
+ !bprm->file->f_op->mmap) {
return -ENOEXEC;
}
@@ -411,16 +392,17 @@
* XXX all registers as 64bits on cpu's capable of this at
* XXX exception time plus frob the XTLB exception vector.
*/
- if((ehp->e_flags & 0x20)) {
+ if((ehp->e_flags & EF_MIPS_ABI2))
return -ENOEXEC;
- }
- return 0; /* It's ok. */
+ return 0;
}
-#define IRIX_INTERP_PREFIX "/usr/gnemul/irix"
-
-/* Look for an IRIX ELF interpreter. */
+/*
+ * This is where the detailed check is performed. Irix binaries
+ * use interpreters with 'libc.so' in the name, so this function
+ * can differentiate between Linux and Irix binaries.
+ */
static inline int look_for_irix_interpreter(char **name,
struct file **interpreter,
struct elfhdr *interp_elf_ex,
@@ -440,12 +422,11 @@
if (*name != NULL)
goto out;
- *name = kmalloc((epp->p_filesz + strlen(IRIX_INTERP_PREFIX)),
- GFP_KERNEL);
+ *name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL);
if (!*name)
return -ENOMEM;
- strcpy(*name, IRIX_INTERP_PREFIX);
+ strcpy(*name, IRIX_EMUL);
retval = kernel_read(bprm->file, epp->p_offset, (*name + 16),
epp->p_filesz);
if (retval < 0)
@@ -562,7 +543,7 @@
* process and the system, here we map the page and fill the
* structure
*/
-void irix_map_prda_page (void)
+static void irix_map_prda_page(void)
{
unsigned long v;
struct prda *pp;
@@ -601,14 +582,33 @@
load_addr = 0;
has_interp = has_ephdr = 0;
- elf_ihdr = elf_ephdr = 0;
+ elf_ihdr = elf_ephdr = NULL;
elf_ex = *((struct elfhdr *) bprm->buf);
retval = -ENOEXEC;
if (verify_binary(&elf_ex, bprm))
goto out;
-#ifdef DEBUG_ELF
+ /*
+ * Telling -o32 static binaries from Linux and Irix apart from each
+ * other is difficult. There are 2 differences to be noted for static
+ * binaries from the 2 operating systems:
+ *
+ * 1) Irix binaries have their .text section before their .init
+ * section. Linux binaries are just the opposite.
+ *
+ * 2) Irix binaries usually have <= 12 sections and Linux
+ * binaries have > 20.
+ *
+ * We will use Method #2 since Method #1 would require us to read in
+ * the section headers which is way too much overhead. This appears
+ * to work for everything we have ran into so far. If anyone has a
+ * better method to tell the binaries apart, I'm listening.
+ */
+ if (elf_ex.e_shnum > 20)
+ goto out;
+
+#ifdef DEBUG
print_elfhdr(&elf_ex);
#endif
@@ -623,11 +623,10 @@
}
retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
-
if (retval < 0)
goto out_free_ph;
-#ifdef DEBUG_ELF
+#ifdef DEBUG
dump_phdrs(elf_phdata, elf_ex.e_phnum);
#endif
@@ -644,9 +643,8 @@
break;
};
}
-#ifdef DEBUG_ELF
- printk("\n");
-#endif
+
+ pr_debug("\n");
elf_bss = 0;
elf_brk = 0;
@@ -657,12 +655,19 @@
end_code = 0;
end_data = 0;
- retval = look_for_irix_interpreter(&elf_interpreter,
- &interpreter,
+ /*
+ * If we get a return value, we change the value to be ENOEXEC
+ * so that we can exit gracefully and the main binary format
+ * search loop in 'fs/exec.c' will move onto the next handler
+ * which should be the normal ELF binary handler.
+ */
+ retval = look_for_irix_interpreter(&elf_interpreter, &interpreter,
&interp_elf_ex, elf_phdata, bprm,
elf_ex.e_phnum);
- if (retval)
+ if (retval) {
+ retval = -ENOEXEC;
goto out_free_file;
+ }
if (elf_interpreter) {
retval = verify_irix_interpreter(&interp_elf_ex);
@@ -692,7 +697,6 @@
/* Do this so that we can load the interpreter, if need be. We will
* change some of these later.
*/
- set_mm_counter(current->mm, rss, 0);
setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
current->mm->start_stack = bprm->p;
@@ -746,18 +750,16 @@
* IRIX maps a page at 0x200000 which holds some system
* information. Programs depend on this.
*/
- irix_map_prda_page ();
+ irix_map_prda_page();
padzero(elf_bss);
-#ifdef DEBUG_ELF
- printk("(start_brk) %lx\n" , (long) current->mm->start_brk);
- printk("(end_code) %lx\n" , (long) current->mm->end_code);
- printk("(start_code) %lx\n" , (long) current->mm->start_code);
- printk("(end_data) %lx\n" , (long) current->mm->end_data);
- printk("(start_stack) %lx\n" , (long) current->mm->start_stack);
- printk("(brk) %lx\n" , (long) current->mm->brk);
-#endif
+ pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk);
+ pr_debug("(end_code) %lx\n" , (long) current->mm->end_code);
+ pr_debug("(start_code) %lx\n" , (long) current->mm->start_code);
+ pr_debug("(end_data) %lx\n" , (long) current->mm->end_data);
+ pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack);
+ pr_debug("(brk) %lx\n" , (long) current->mm->brk);
#if 0 /* XXX No fucking way dude... */
/* Why this, you ask??? Well SVr4 maps page 0 as read-only,
@@ -782,8 +784,7 @@
allow_write_access(interpreter);
fput(interpreter);
out_free_interp:
- if (elf_interpreter)
- kfree(elf_interpreter);
+ kfree(elf_interpreter);
out_free_file:
out_free_ph:
kfree (elf_phdata);
@@ -813,7 +814,7 @@
/* First of all, some simple consistency checks. */
if(elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
- !irix_elf_check_arch(&elf_ex) || !file->f_op->mmap)
+ !file->f_op->mmap)
return -ENOEXEC;
/* Now read in all of the header information. */
@@ -874,35 +875,36 @@
* phdrs there are in the USER_PHDRP array. We return the vaddr the
* first phdr was successfully mapped to.
*/
-unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt)
+unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt)
{
- struct elf_phdr *hp;
+ unsigned long type, vaddr, filesz, offset, flags;
+ struct elf_phdr __user *hp;
struct file *filp;
int i, retval;
-#ifdef DEBUG_ELF
- printk("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
- fd, user_phdrp, cnt);
-#endif
+ pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
+ fd, user_phdrp, cnt);
/* First get the verification out of the way. */
hp = user_phdrp;
if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) {
-#ifdef DEBUG_ELF
- printk("irix_mapelf: access_ok fails!\n");
-#endif
+ pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n");
+
return -EFAULT;
}
-#ifdef DEBUG_ELF
+#ifdef DEBUG
dump_phdrs(user_phdrp, cnt);
#endif
- for(i = 0; i < cnt; i++, hp++)
- if(hp->p_type != PT_LOAD) {
+ for (i = 0; i < cnt; i++, hp++) {
+ if (__get_user(type, &hp->p_type))
+ return -EFAULT;
+ if (type != PT_LOAD) {
printk("irix_mapelf: One section is not PT_LOAD!\n");
return -ENOEXEC;
}
+ }
filp = fget(fd);
if (!filp)
@@ -917,29 +919,40 @@
for(i = 0; i < cnt; i++, hp++) {
int prot;
- prot = (hp->p_flags & PF_R) ? PROT_READ : 0;
- prot |= (hp->p_flags & PF_W) ? PROT_WRITE : 0;
- prot |= (hp->p_flags & PF_X) ? PROT_EXEC : 0;
+ retval = __get_user(vaddr, &hp->p_vaddr);
+ retval |= __get_user(filesz, &hp->p_filesz);
+ retval |= __get_user(offset, &hp->p_offset);
+ retval |= __get_user(flags, &hp->p_flags);
+ if (retval)
+ return retval;
+
+ prot = (flags & PF_R) ? PROT_READ : 0;
+ prot |= (flags & PF_W) ? PROT_WRITE : 0;
+ prot |= (flags & PF_X) ? PROT_EXEC : 0;
+
down_write(¤t->mm->mmap_sem);
- retval = do_mmap(filp, (hp->p_vaddr & 0xfffff000),
- (hp->p_filesz + (hp->p_vaddr & 0xfff)),
+ retval = do_mmap(filp, (vaddr & 0xfffff000),
+ (filesz + (vaddr & 0xfff)),
prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE),
- (hp->p_offset & 0xfffff000));
+ (offset & 0xfffff000));
up_write(¤t->mm->mmap_sem);
- if(retval != (hp->p_vaddr & 0xfffff000)) {
+ if (retval != (vaddr & 0xfffff000)) {
printk("irix_mapelf: do_mmap fails with %d!\n", retval);
fput(filp);
return retval;
}
}
-#ifdef DEBUG_ELF
- printk("irix_mapelf: Success, returning %08lx\n",
- (unsigned long) user_phdrp->p_vaddr);
-#endif
+ pr_debug("irix_mapelf: Success, returning %08lx\n",
+ (unsigned long) user_phdrp->p_vaddr);
+
fput(filp);
- return user_phdrp->p_vaddr;
+
+ if (__get_user(vaddr, &user_phdrp->p_vaddr))
+ return -EFAULT;
+
+ return vaddr;
}
/*
@@ -952,9 +965,9 @@
/* These are the only things you should do on a core-file: use only these
* functions to write out all the necessary info.
*/
-static int dump_write(struct file *file, const void *addr, int nr)
+static int dump_write(struct file *file, const void __user *addr, int nr)
{
- return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+ return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr;
}
static int dump_seek(struct file *file, off_t off)
@@ -1064,8 +1077,8 @@
struct elfhdr elf;
off_t offset = 0, dataoff;
int limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
- int numnote = 4;
- struct memelfnote notes[4];
+ int numnote = 3;
+ struct memelfnote notes[3];
struct elf_prstatus prstatus; /* NT_PRSTATUS */
elf_fpregset_t fpu; /* NT_PRFPREG */
struct elf_prpsinfo psinfo; /* NT_PRPSINFO */
@@ -1073,7 +1086,7 @@
/* Count what's needed to dump, up to the limit of coredump size. */
segs = 0;
size = 0;
- for(vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
+ for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
if (maydump(vma))
{
int sz = vma->vm_end-vma->vm_start;
@@ -1187,9 +1200,9 @@
len = current->mm->arg_end - current->mm->arg_start;
len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len;
- copy_from_user(&psinfo.pr_psargs,
- (const char *)current->mm->arg_start, len);
- for(i = 0; i < len; i++)
+ (void *) copy_from_user(&psinfo.pr_psargs,
+ (const char __user *)current->mm->arg_start, len);
+ for (i = 0; i < len; i++)
if (psinfo.pr_psargs[i] == 0)
psinfo.pr_psargs[i] = ' ';
psinfo.pr_psargs[len] = 0;
@@ -1198,20 +1211,15 @@
}
strlcpy(psinfo.pr_fname, current->comm, sizeof(psinfo.pr_fname));
- notes[2].name = "CORE";
- notes[2].type = NT_TASKSTRUCT;
- notes[2].datasz = sizeof(*current);
- notes[2].data = current;
-
/* Try to dump the FPU. */
prstatus.pr_fpvalid = dump_fpu (regs, &fpu);
if (!prstatus.pr_fpvalid) {
numnote--;
} else {
- notes[3].name = "CORE";
- notes[3].type = NT_PRFPREG;
- notes[3].datasz = sizeof(fpu);
- notes[3].data = &fpu;
+ notes[2].name = "CORE";
+ notes[2].type = NT_PRFPREG;
+ notes[2].datasz = sizeof(fpu);
+ notes[2].data = &fpu;
}
/* Write notes phdr entry. */
@@ -1256,8 +1264,10 @@
phdr.p_memsz = sz;
offset += phdr.p_filesz;
phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
- if (vma->vm_flags & VM_WRITE) phdr.p_flags |= PF_W;
- if (vma->vm_flags & VM_EXEC) phdr.p_flags |= PF_X;
+ if (vma->vm_flags & VM_WRITE)
+ phdr.p_flags |= PF_W;
+ if (vma->vm_flags & VM_EXEC)
+ phdr.p_flags |= PF_X;
phdr.p_align = PAGE_SIZE;
DUMP_WRITE(&phdr, sizeof(phdr));
@@ -1283,7 +1293,7 @@
#ifdef DEBUG
printk("elf_core_dump: writing %08lx %lx\n", addr, len);
#endif
- DUMP_WRITE((void *)addr, len);
+ DUMP_WRITE((void __user *)addr, len);
}
if ((off_t) file->f_pos != offset) {
@@ -1299,7 +1309,7 @@
static int __init init_irix_binfmt(void)
{
- int init_inventory(void);
+ extern int init_inventory(void);
extern asmlinkage unsigned long sys_call_table;
extern asmlinkage unsigned long sys_call_table_irix5;
@@ -1318,7 +1328,9 @@
static void __exit exit_irix_binfmt(void)
{
- /* Remove the IRIX ELF loaders. */
+ /*
+ * Remove the Irix ELF loader.
+ */
unregister_binfmt(&irix_format);
}
diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c
index 60aa98c..de8584f6 100644
--- a/arch/mips/kernel/irixinv.c
+++ b/arch/mips/kernel/irixinv.c
@@ -30,10 +30,10 @@
inventory_items++;
}
-int dump_inventory_to_user (void *userbuf, int size)
+int dump_inventory_to_user (void __user *userbuf, int size)
{
inventory_t *inv = &inventory [0];
- inventory_t *user = userbuf;
+ inventory_t __user *user = userbuf;
int v;
if (!access_ok(VERIFY_WRITE, userbuf, size))
@@ -41,7 +41,8 @@
for (v = 0; v < inventory_items; v++){
inv = &inventory [v];
- copy_to_user (user, inv, sizeof (inventory_t));
+ if (copy_to_user (user, inv, sizeof (inventory_t)))
+ return -EFAULT;
user++;
}
return inventory_items * sizeof (inventory_t);
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
index 3cdc223..e286382 100644
--- a/arch/mips/kernel/irixioctl.c
+++ b/arch/mips/kernel/irixioctl.c
@@ -59,7 +59,7 @@
{
struct tty_struct *tp, *rtp;
mm_segment_t old_fs;
- int error = 0;
+ int i, error = 0;
#ifdef DEBUG_IOCTLS
printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd);
@@ -74,12 +74,13 @@
case 0x0000540d: {
struct termios kt;
- struct irix_termios *it = (struct irix_termios *) arg;
+ struct irix_termios __user *it =
+ (struct irix_termios __user *) arg;
#ifdef DEBUG_IOCTLS
printk("TCGETS, %08lx) ", arg);
#endif
- if(!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
+ if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
error = -EFAULT;
break;
}
@@ -88,13 +89,14 @@
set_fs(old_fs);
if (error)
break;
- __put_user(kt.c_iflag, &it->c_iflag);
- __put_user(kt.c_oflag, &it->c_oflag);
- __put_user(kt.c_cflag, &it->c_cflag);
- __put_user(kt.c_lflag, &it->c_lflag);
- for(error = 0; error < NCCS; error++)
- __put_user(kt.c_cc[error], &it->c_cc[error]);
- error = 0;
+
+ error = __put_user(kt.c_iflag, &it->c_iflag);
+ error |= __put_user(kt.c_oflag, &it->c_oflag);
+ error |= __put_user(kt.c_cflag, &it->c_cflag);
+ error |= __put_user(kt.c_lflag, &it->c_lflag);
+
+ for (i = 0; i < NCCS; i++)
+ error |= __put_user(kt.c_cc[i], &it->c_cc[i]);
break;
}
@@ -112,14 +114,19 @@
old_fs = get_fs(); set_fs(get_ds());
error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
set_fs(old_fs);
- if(error)
+ if (error)
break;
- __get_user(kt.c_iflag, &it->c_iflag);
- __get_user(kt.c_oflag, &it->c_oflag);
- __get_user(kt.c_cflag, &it->c_cflag);
- __get_user(kt.c_lflag, &it->c_lflag);
- for(error = 0; error < NCCS; error++)
- __get_user(kt.c_cc[error], &it->c_cc[error]);
+
+ error = __get_user(kt.c_iflag, &it->c_iflag);
+ error |= __get_user(kt.c_oflag, &it->c_oflag);
+ error |= __get_user(kt.c_cflag, &it->c_cflag);
+ error |= __get_user(kt.c_lflag, &it->c_lflag);
+
+ for (i = 0; i < NCCS; i++)
+ error |= __get_user(kt.c_cc[i], &it->c_cc[i]);
+
+ if (error)
+ break;
old_fs = get_fs(); set_fs(get_ds());
error = sys_ioctl(fd, TCSETS, (unsigned long) &kt);
set_fs(old_fs);
@@ -153,7 +160,7 @@
#ifdef DEBUG_IOCTLS
printk("rtp->session=%d ", rtp->session);
#endif
- error = put_user(rtp->session, (unsigned long *) arg);
+ error = put_user(rtp->session, (unsigned long __user *) arg);
break;
case 0x746e:
@@ -195,50 +202,32 @@
break;
case 0x8004667e:
-#ifdef DEBUG_IOCTLS
- printk("FIONBIO, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, FIONBIO, arg);
break;
case 0x80047476:
-#ifdef DEBUG_IOCTLS
- printk("TIOCSPGRP, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, TIOCSPGRP, arg);
break;
case 0x8020690c:
-#ifdef DEBUG_IOCTLS
- printk("SIOCSIFADDR, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, SIOCSIFADDR, arg);
break;
case 0x80206910:
-#ifdef DEBUG_IOCTLS
- printk("SIOCSIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, SIOCSIFFLAGS, arg);
break;
case 0xc0206911:
-#ifdef DEBUG_IOCTLS
- printk("SIOCGIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, SIOCGIFFLAGS, arg);
break;
case 0xc020691b:
-#ifdef DEBUG_IOCTLS
- printk("SIOCGIFMETRIC, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
error = sys_ioctl(fd, SIOCGIFMETRIC, arg);
break;
default: {
#ifdef DEBUG_MISSING_IOCTL
- char *msg = "Unimplemented IOCTL cmd tell linux@engr.sgi.com\n";
+ char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n";
#ifdef DEBUG_IOCTLS
printk("UNIMP_IOCTL, %08lx)\n", arg);
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index eff8932..908e636 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -76,36 +76,39 @@
}
#endif
-static void setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
- int signr, sigset_t *oldmask)
+static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
+ int signr, sigset_t *oldmask)
{
+ struct sigctx_irix5 __user *ctx;
unsigned long sp;
- struct sigctx_irix5 *ctx;
- int i;
+ int error, i;
sp = regs->regs[29];
sp -= sizeof(struct sigctx_irix5);
sp &= ~(0xf);
- ctx = (struct sigctx_irix5 *) sp;
+ ctx = (struct sigctx_irix5 __user *) sp;
if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
goto segv_and_exit;
- __put_user(0, &ctx->weird_fpu_thing);
- __put_user(~(0x00000001), &ctx->rmask);
- __put_user(0, &ctx->regs[0]);
+ error = __put_user(0, &ctx->weird_fpu_thing);
+ error |= __put_user(~(0x00000001), &ctx->rmask);
+ error |= __put_user(0, &ctx->regs[0]);
for(i = 1; i < 32; i++)
- __put_user((u64) regs->regs[i], &ctx->regs[i]);
+ error |= __put_user((u64) regs->regs[i], &ctx->regs[i]);
- __put_user((u64) regs->hi, &ctx->hi);
- __put_user((u64) regs->lo, &ctx->lo);
- __put_user((u64) regs->cp0_epc, &ctx->pc);
- __put_user(!!used_math(), &ctx->usedfp);
- __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
- __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
+ error |= __put_user((u64) regs->hi, &ctx->hi);
+ error |= __put_user((u64) regs->lo, &ctx->lo);
+ error |= __put_user((u64) regs->cp0_epc, &ctx->pc);
+ error |= __put_user(!!used_math(), &ctx->usedfp);
+ error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
+ error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
- __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
+ error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
- __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t));
+ error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0;
+
+ if (error)
+ goto segv_and_exit;
#ifdef DEBUG_SIG
dump_irix5_sigctx(ctx);
@@ -117,13 +120,14 @@
regs->regs[7] = (unsigned long) ka->sa.sa_handler;
regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer;
- return;
+ return 1;
segv_and_exit:
force_sigsegv(signr, current);
+ return 0;
}
-static void inline
+static int inline
setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *oldmask, siginfo_t *info)
{
@@ -131,9 +135,11 @@
do_exit(SIGSEGV);
}
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
{
+ int ret;
+
switch(regs->regs[0]) {
case ERESTARTNOHAND:
regs->regs[2] = EINTR;
@@ -151,9 +157,9 @@
regs->regs[0] = 0; /* Don't deal with this again. */
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_irix_rt_frame(ka, regs, sig, oldset, info);
+ ret = setup_irix_rt_frame(ka, regs, sig, oldset, info);
else
- setup_irix_frame(ka, regs, sig, oldset);
+ ret = setup_irix_frame(ka, regs, sig, oldset);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
@@ -161,6 +167,8 @@
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ return ret;
}
asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
@@ -184,10 +192,8 @@
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- handle_signal(signr, &info, &ka, oldset, regs);
- return 1;
- }
+ if (signr > 0)
+ return handle_signal(signr, &info, &ka, oldset, regs);
no_signal:
/*
@@ -208,10 +214,11 @@
asmlinkage void
irix_sigreturn(struct pt_regs *regs)
{
- struct sigctx_irix5 *context, *magic;
+ struct sigctx_irix5 __user *context, *magic;
unsigned long umask, mask;
u64 *fregs;
- int sig, i, base = 0;
+ u32 usedfp;
+ int error, sig, i, base = 0;
sigset_t blocked;
/* Always make any pending restarted system calls return -EINTR */
@@ -220,8 +227,8 @@
if (regs->regs[2] == 1000)
base = 1;
- context = (struct sigctx_irix5 *) regs->regs[base + 4];
- magic = (struct sigctx_irix5 *) regs->regs[base + 5];
+ context = (struct sigctx_irix5 __user *) regs->regs[base + 4];
+ magic = (struct sigctx_irix5 __user *) regs->regs[base + 5];
sig = (int) regs->regs[base + 6];
#ifdef DEBUG_SIG
printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n",
@@ -236,25 +243,31 @@
dump_irix5_sigctx(context);
#endif
- __get_user(regs->cp0_epc, &context->pc);
- umask = context->rmask; mask = 2;
- for (i = 1; i < 32; i++, mask <<= 1) {
- if(umask & mask)
- __get_user(regs->regs[i], &context->regs[i]);
- }
- __get_user(regs->hi, &context->hi);
- __get_user(regs->lo, &context->lo);
+ error = __get_user(regs->cp0_epc, &context->pc);
+ error |= __get_user(umask, &context->rmask);
- if ((umask & 1) && context->usedfp) {
+ mask = 2;
+ for (i = 1; i < 32; i++, mask <<= 1) {
+ if (umask & mask)
+ error |= __get_user(regs->regs[i], &context->regs[i]);
+ }
+ error |= __get_user(regs->hi, &context->hi);
+ error |= __get_user(regs->lo, &context->lo);
+
+ error |= __get_user(usedfp, &context->usedfp);
+ if ((umask & 1) && usedfp) {
fregs = (u64 *) ¤t->thread.fpu;
+
for(i = 0; i < 32; i++)
- fregs[i] = (u64) context->fpregs[i];
- __get_user(current->thread.fpu.hard.fcr31, &context->fpcsr);
+ error |= __get_user(fregs[i], &context->fpregs[i]);
+ error |= __get_user(current->thread.fpu.hard.fcr31, &context->fpcsr);
}
/* XXX do sigstack crapola here... XXX */
- if (__copy_from_user(&blocked, &context->sigset, sizeof(blocked)))
+ error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0;
+
+ if (error)
goto badframe;
sigdelsetmask(&blocked, ~_BLOCKABLE);
@@ -296,8 +309,8 @@
#endif
asmlinkage int
-irix_sigaction(int sig, const struct sigaction *act,
- struct sigaction *oact, void *trampoline)
+irix_sigaction(int sig, const struct sigaction __user *act,
+ struct sigaction __user *oact, void __user *trampoline)
{
struct k_sigaction new_ka, old_ka;
int ret;
@@ -311,12 +324,16 @@
#endif
if (act) {
sigset_t mask;
- if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
- __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_flags, &act->sa_flags))
- return -EFAULT;
+ int err;
- __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t));
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)))
+ return -EFAULT;
+ err = __get_user(new_ka.sa.sa_handler, &act->sa_handler);
+ err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+
+ err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0;
+ if (err)
+ return err;
/*
* Hmmm... methinks IRIX libc always passes a valid trampoline
@@ -330,30 +347,37 @@
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
- if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
+ int err;
+
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
return -EFAULT;
- __copy_to_user(&old_ka.sa.sa_mask, &oact->sa_mask,
- sizeof(sigset_t));
+
+ err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
+ err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask,
+ sizeof(sigset_t)) ? -EFAULT : 0;
+ if (err)
+ return -EFAULT;
}
return ret;
}
-asmlinkage int irix_sigpending(irix_sigset_t *set)
+asmlinkage int irix_sigpending(irix_sigset_t __user *set)
{
return do_sigpending(set, sizeof(*set));
}
-asmlinkage int irix_sigprocmask(int how, irix_sigset_t *new, irix_sigset_t *old)
+asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new,
+ irix_sigset_t __user *old)
{
sigset_t oldbits, newbits;
if (new) {
if (!access_ok(VERIFY_READ, new, sizeof(*new)))
return -EFAULT;
- __copy_from_user(&newbits, new, sizeof(unsigned long)*4);
+ if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4))
+ return -EFAULT;
sigdelsetmask(&newbits, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
@@ -381,20 +405,19 @@
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
}
- if(old) {
- if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
- return -EFAULT;
- __copy_to_user(old, ¤t->blocked, sizeof(unsigned long)*4);
- }
+ if (old)
+ return copy_to_user(old, ¤t->blocked,
+ sizeof(unsigned long)*4) ? -EFAULT : 0;
return 0;
}
asmlinkage int irix_sigsuspend(struct pt_regs *regs)
{
- sigset_t *uset, saveset, newset;
+ sigset_t saveset, newset;
+ sigset_t __user *uset;
- uset = (sigset_t *) regs->regs[4];
+ uset = (sigset_t __user *) regs->regs[4];
if (copy_from_user(&newset, uset, sizeof(sigset_t)))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -440,12 +463,13 @@
} stuff;
};
-asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
- struct timespec *tp)
+asmlinkage int irix_sigpoll_sys(unsigned long __user *set,
+ struct irix5_siginfo __user *info, struct timespec __user *tp)
{
long expire = MAX_SCHEDULE_TIMEOUT;
sigset_t kset;
int i, sig, error, timeo = 0;
+ struct timespec ktp;
#ifdef DEBUG_SIG
printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n",
@@ -456,14 +480,8 @@
if (!set)
return -EINVAL;
- if (!access_ok(VERIFY_READ, set, sizeof(kset))) {
- error = -EFAULT;
- goto out;
- }
-
- __copy_from_user(&kset, set, sizeof(set));
- if (error)
- goto out;
+ if (copy_from_user(&kset, set, sizeof(set)))
+ return -EFAULT;
if (info && clear_user(info, sizeof(*info))) {
error = -EFAULT;
@@ -471,19 +489,21 @@
}
if (tp) {
- if (!access_ok(VERIFY_READ, tp, sizeof(*tp)))
+ if (copy_from_user(&ktp, tp, sizeof(*tp)))
return -EFAULT;
- if (!tp->tv_sec && !tp->tv_nsec) {
- error = -EINVAL;
- goto out;
- }
- expire = timespec_to_jiffies(tp) + (tp->tv_sec||tp->tv_nsec);
+
+ if (!ktp.tv_sec && !ktp.tv_nsec)
+ return -EINVAL;
+
+ expire = timespec_to_jiffies(&ktp) +
+ (ktp.tv_sec || ktp.tv_nsec);
}
while(1) {
long tmp = 0;
- expire = schedule_timeout_interruptible(expire);
+ current->state = TASK_INTERRUPTIBLE;
+ expire = schedule_timeout(expire);
for (i=0; i<=4; i++)
tmp |= (current->pending.signal.sig[i] & kset.sig[i]);
@@ -500,15 +520,14 @@
if (timeo)
return -EAGAIN;
- for(sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
+ for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
if (sigismember (&kset, sig))
continue;
if (sigismember (¤t->pending.signal, sig)) {
/* XXX need more than this... */
if (info)
- info->sig = sig;
- error = 0;
- goto out;
+ return copy_to_user(&info->sig, &sig, sizeof(sig));
+ return 0;
}
}
@@ -534,8 +553,9 @@
#define W_MASK (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG)
-asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info,
- int options, struct rusage *ru)
+asmlinkage int irix_waitsys(int type, int pid,
+ struct irix5_siginfo __user *info, int options,
+ struct rusage __user *ru)
{
int flag, retval;
DECLARE_WAITQUEUE(wait, current);
@@ -543,28 +563,22 @@
struct task_struct *p;
struct list_head *_p;
- if (!info) {
- retval = -EINVAL;
- goto out;
- }
- if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) {
- retval = -EFAULT;
- goto out;
- }
- if (ru) {
- if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru))) {
- retval = -EFAULT;
- goto out;
- }
- }
- if (options & ~(W_MASK)) {
- retval = -EINVAL;
- goto out;
- }
- if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL) {
- retval = -EINVAL;
- goto out;
- }
+ if (!info)
+ return -EINVAL;
+
+ if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
+ return -EFAULT;
+
+ if (ru)
+ if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru)))
+ return -EFAULT;
+
+ if (options & ~W_MASK)
+ return -EINVAL;
+
+ if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL)
+ return -EINVAL;
+
add_wait_queue(¤t->signal->wait_chldexit, &wait);
repeat:
flag = 0;
@@ -595,18 +609,20 @@
add_parent(p, p->parent);
write_unlock_irq(&tasklist_lock);
retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
- if (!retval && ru) {
- retval |= __put_user(SIGCHLD, &info->sig);
- retval |= __put_user(0, &info->code);
- retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
- retval |= __put_user((p->exit_code >> 8) & 0xff,
- &info->stuff.procinfo.procdata.child.status);
- retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
- retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
- }
- if (!retval) {
- p->exit_code = 0;
- }
+ if (retval)
+ goto end_waitsys;
+
+ retval = __put_user(SIGCHLD, &info->sig);
+ retval |= __put_user(0, &info->code);
+ retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+ retval |= __put_user((p->exit_code >> 8) & 0xff,
+ &info->stuff.procinfo.procdata.child.status);
+ retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
+ retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
+ if (retval)
+ goto end_waitsys;
+
+ p->exit_code = 0;
goto end_waitsys;
case EXIT_ZOMBIE:
@@ -614,16 +630,18 @@
current->signal->cstime += p->stime + p->signal->cstime;
if (ru != NULL)
getrusage(p, RUSAGE_BOTH, ru);
- __put_user(SIGCHLD, &info->sig);
- __put_user(1, &info->code); /* CLD_EXITED */
- __put_user(p->pid, &info->stuff.procinfo.pid);
- __put_user((p->exit_code >> 8) & 0xff,
+ retval = __put_user(SIGCHLD, &info->sig);
+ retval |= __put_user(1, &info->code); /* CLD_EXITED */
+ retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+ retval |= __put_user((p->exit_code >> 8) & 0xff,
&info->stuff.procinfo.procdata.child.status);
- __put_user(p->utime,
+ retval |= __put_user(p->utime,
&info->stuff.procinfo.procdata.child.utime);
- __put_user(p->stime,
+ retval |= __put_user(p->stime,
&info->stuff.procinfo.procdata.child.stime);
- retval = 0;
+ if (retval)
+ return retval;
+
if (p->real_parent != p->parent) {
write_lock_irq(&tasklist_lock);
remove_parent(p);
@@ -656,7 +674,6 @@
current->state = TASK_RUNNING;
remove_wait_queue(¤t->signal->wait_chldexit, &wait);
-out:
return retval;
}
@@ -675,39 +692,39 @@
asmlinkage int irix_getcontext(struct pt_regs *regs)
{
- int i, base = 0;
- struct irix5_context *ctx;
+ int error, i, base = 0;
+ struct irix5_context __user *ctx;
unsigned long flags;
if (regs->regs[2] == 1000)
base = 1;
- ctx = (struct irix5_context *) regs->regs[base + 4];
+ ctx = (struct irix5_context __user *) regs->regs[base + 4];
#ifdef DEBUG_SIG
printk("[%s:%d] irix_getcontext(%p)\n",
current->comm, current->pid, ctx);
#endif
- if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
+ if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)));
return -EFAULT;
- __put_user(current->thread.irix_oldctx, &ctx->link);
+ error = __put_user(current->thread.irix_oldctx, &ctx->link);
- __copy_to_user(&ctx->sigmask, ¤t->blocked, sizeof(irix_sigset_t));
+ error |= __copy_to_user(&ctx->sigmask, ¤t->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0;
/* XXX Do sigstack stuff someday... */
- __put_user(0, &ctx->stack.sp);
- __put_user(0, &ctx->stack.size);
- __put_user(0, &ctx->stack.flags);
+ error |= __put_user(0, &ctx->stack.sp);
+ error |= __put_user(0, &ctx->stack.size);
+ error |= __put_user(0, &ctx->stack.flags);
- __put_user(0, &ctx->weird_graphics_thing);
- __put_user(0, &ctx->regs[0]);
+ error |= __put_user(0, &ctx->weird_graphics_thing);
+ error |= __put_user(0, &ctx->regs[0]);
for (i = 1; i < 32; i++)
- __put_user(regs->regs[i], &ctx->regs[i]);
- __put_user(regs->lo, &ctx->regs[32]);
- __put_user(regs->hi, &ctx->regs[33]);
- __put_user(regs->cp0_cause, &ctx->regs[34]);
- __put_user(regs->cp0_epc, &ctx->regs[35]);
+ error |= __put_user(regs->regs[i], &ctx->regs[i]);
+ error |= __put_user(regs->lo, &ctx->regs[32]);
+ error |= __put_user(regs->hi, &ctx->regs[33]);
+ error |= __put_user(regs->cp0_cause, &ctx->regs[34]);
+ error |= __put_user(regs->cp0_epc, &ctx->regs[35]);
flags = 0x0f;
if (!used_math()) {
@@ -716,119 +733,124 @@
/* XXX wheee... */
printk("Wheee, no code for saving IRIX FPU context yet.\n");
}
- __put_user(flags, &ctx->flags);
+ error |= __put_user(flags, &ctx->flags);
- return 0;
+ return error;
}
-asmlinkage unsigned long irix_setcontext(struct pt_regs *regs)
+asmlinkage void irix_setcontext(struct pt_regs *regs)
{
- int error, base = 0;
- struct irix5_context *ctx;
+ struct irix5_context __user *ctx;
+ int err, base = 0;
+ u32 flags;
- if(regs->regs[2] == 1000)
+ if (regs->regs[2] == 1000)
base = 1;
- ctx = (struct irix5_context *) regs->regs[base + 4];
+ ctx = (struct irix5_context __user *) regs->regs[base + 4];
#ifdef DEBUG_SIG
printk("[%s:%d] irix_setcontext(%p)\n",
current->comm, current->pid, ctx);
#endif
- if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))) {
- error = -EFAULT;
- goto out;
- }
+ if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)))
+ goto segv_and_exit;
- if (ctx->flags & 0x02) {
+ err = __get_user(flags, &ctx->flags);
+ if (flags & 0x02) {
/* XXX sigstack garbage, todo... */
printk("Wheee, cannot do sigstack stuff in setcontext\n");
}
- if (ctx->flags & 0x04) {
+ if (flags & 0x04) {
int i;
/* XXX extra control block stuff... todo... */
- for(i = 1; i < 32; i++)
- regs->regs[i] = ctx->regs[i];
- regs->lo = ctx->regs[32];
- regs->hi = ctx->regs[33];
- regs->cp0_epc = ctx->regs[35];
+ for (i = 1; i < 32; i++)
+ err |= __get_user(regs->regs[i], &ctx->regs[i]);
+ err |= __get_user(regs->lo, &ctx->regs[32]);
+ err |= __get_user(regs->hi, &ctx->regs[33]);
+ err |= __get_user(regs->cp0_epc, &ctx->regs[35]);
}
- if (ctx->flags & 0x08) {
+ if (flags & 0x08)
/* XXX fpu context, blah... */
- printk("Wheee, cannot restore FPU context yet...\n");
- }
- current->thread.irix_oldctx = ctx->link;
- error = regs->regs[2];
+ printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n");
-out:
- return error;
+ err |= __get_user(current->thread.irix_oldctx, &ctx->link);
+ if (err)
+ goto segv_and_exit;
+
+ /*
+ * Don't let your children do this ...
+ */
+ if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
+ do_syscall_trace(regs, 1);
+ __asm__ __volatile__(
+ "move\t$29,%0\n\t"
+ "j\tsyscall_exit"
+ :/* no outputs */
+ :"r" (®s));
+ /* Unreached */
+
+segv_and_exit:
+ force_sigsegv(SIGSEGV, current);
}
-struct irix_sigstack { unsigned long sp; int status; };
+struct irix_sigstack {
+ unsigned long sp;
+ int status;
+};
-asmlinkage int irix_sigstack(struct irix_sigstack *new, struct irix_sigstack *old)
+asmlinkage int irix_sigstack(struct irix_sigstack __user *new,
+ struct irix_sigstack __user *old)
{
- int error = -EFAULT;
-
#ifdef DEBUG_SIG
printk("[%s:%d] irix_sigstack(%p,%p)\n",
current->comm, current->pid, new, old);
#endif
- if(new) {
- if (!access_ok(VERIFY_READ, new, sizeof(*new)))
- goto out;
- }
-
- if(old) {
- if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
- goto out;
- }
- error = 0;
-
-out:
- return error;
-}
-
-struct irix_sigaltstack { unsigned long sp; int size; int status; };
-
-asmlinkage int irix_sigaltstack(struct irix_sigaltstack *new,
- struct irix_sigaltstack *old)
-{
- int error = -EFAULT;
-
-#ifdef DEBUG_SIG
- printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
- current->comm, current->pid, new, old);
-#endif
if (new) {
if (!access_ok(VERIFY_READ, new, sizeof(*new)))
- goto out;
+ return -EFAULT;
}
if (old) {
if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
- goto out;
+ return -EFAULT;
}
- error = 0;
-out:
- error = 0;
+ return 0;
+}
- return error;
+struct irix_sigaltstack { unsigned long sp; int size; int status; };
+
+asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new,
+ struct irix_sigaltstack __user *old)
+{
+#ifdef DEBUG_SIG
+ printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
+ current->comm, current->pid, new, old);
+#endif
+ if (new)
+ if (!access_ok(VERIFY_READ, new, sizeof(*new)))
+ return -EFAULT;
+
+ if (old) {
+ if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
+ return -EFAULT;
+ }
+
+ return 0;
}
struct irix_procset {
int cmd, ltype, lid, rtype, rid;
};
-asmlinkage int irix_sigsendset(struct irix_procset *pset, int sig)
+asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig)
{
if (!access_ok(VERIFY_READ, pset, sizeof(*pset)))
return -EFAULT;
-
#ifdef DEBUG_SIG
printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n",
current->comm, current->pid,
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 43c00ac..3f653c7 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -74,7 +74,7 @@
static void level_mask_and_ack_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
- if (!cpu_has_ei)
+ if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
}
@@ -84,7 +84,7 @@
static void edge_mask_and_ack_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
- if (!cpu_has_ei)
+ if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
else {
u32 r;
@@ -129,25 +129,23 @@
#define shutdown_msc_irq disable_msc_irq
struct hw_interrupt_type msc_levelirq_type = {
- "SOC-it-Level",
- startup_msc_irq,
- shutdown_msc_irq,
- enable_msc_irq,
- disable_msc_irq,
- level_mask_and_ack_msc_irq,
- end_msc_irq,
- NULL
+ .typename = "SOC-it-Level",
+ .startup = startup_msc_irq,
+ .shutdown = shutdown_msc_irq,
+ .enable = enable_msc_irq,
+ .disable = disable_msc_irq,
+ .ack = level_mask_and_ack_msc_irq,
+ .end = end_msc_irq,
};
struct hw_interrupt_type msc_edgeirq_type = {
- "SOC-it-Edge",
- startup_msc_irq,
- shutdown_msc_irq,
- enable_msc_irq,
- disable_msc_irq,
- edge_mask_and_ack_msc_irq,
- end_msc_irq,
- NULL
+ .typename = "SOC-it-Edge",
+ .startup =startup_msc_irq,
+ .shutdown = shutdown_msc_irq,
+ .enable = enable_msc_irq,
+ .disable = disable_msc_irq,
+ .ack = edge_mask_and_ack_msc_irq,
+ .end = end_msc_irq,
};
@@ -168,14 +166,14 @@
switch (imp->im_type) {
case MSC01_IRQ_EDGE:
irq_desc[base+n].handler = &msc_edgeirq_type;
- if (cpu_has_ei)
+ if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
break;
case MSC01_IRQ_LEVEL:
irq_desc[base+n].handler = &msc_levelirq_type;
- if (cpu_has_ei)
+ if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl);
diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c
index 088bbbc..0ac067f 100644
--- a/arch/mips/kernel/irq-mv6434x.c
+++ b/arch/mips/kernel/irq-mv6434x.c
@@ -135,14 +135,13 @@
#define shutdown_mv64340_irq disable_mv64340_irq
struct hw_interrupt_type mv64340_irq_type = {
- "MV-64340",
- startup_mv64340_irq,
- shutdown_mv64340_irq,
- enable_mv64340_irq,
- disable_mv64340_irq,
- mask_and_ack_mv64340_irq,
- end_mv64340_irq,
- NULL
+ .typename = "MV-64340",
+ .startup = startup_mv64340_irq,
+ .shutdown = shutdown_mv64340_irq,
+ .enable = enable_mv64340_irq,
+ .disable = disable_mv64340_irq,
+ .ack = mask_and_ack_mv64340_irq,
+ .end = end_mv64340_irq,
};
void __init mv64340_irq_init(unsigned int base)
diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c
index f5d779f..0b130c5 100644
--- a/arch/mips/kernel/irq-rm7000.c
+++ b/arch/mips/kernel/irq-rm7000.c
@@ -72,13 +72,13 @@
}
static hw_irq_controller rm7k_irq_controller = {
- "RM7000",
- rm7k_cpu_irq_startup,
- rm7k_cpu_irq_shutdown,
- rm7k_cpu_irq_enable,
- rm7k_cpu_irq_disable,
- rm7k_cpu_irq_ack,
- rm7k_cpu_irq_end,
+ .typename = "RM7000",
+ .startup = rm7k_cpu_irq_startup,
+ .shutdown = rm7k_cpu_irq_shutdown,
+ .enable = rm7k_cpu_irq_enable,
+ .disable = rm7k_cpu_irq_disable,
+ .ack = rm7k_cpu_irq_ack,
+ .end = rm7k_cpu_irq_end,
};
void __init rm7k_cpu_irq_init(int base)
diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c
index bdd1302..9b5f20c 100644
--- a/arch/mips/kernel/irq-rm9000.c
+++ b/arch/mips/kernel/irq-rm9000.c
@@ -106,23 +106,23 @@
}
static hw_irq_controller rm9k_irq_controller = {
- "RM9000",
- rm9k_cpu_irq_startup,
- rm9k_cpu_irq_shutdown,
- rm9k_cpu_irq_enable,
- rm9k_cpu_irq_disable,
- rm9k_cpu_irq_ack,
- rm9k_cpu_irq_end,
+ .typename = "RM9000",
+ .startup = rm9k_cpu_irq_startup,
+ .shutdown = rm9k_cpu_irq_shutdown,
+ .enable = rm9k_cpu_irq_enable,
+ .disable = rm9k_cpu_irq_disable,
+ .ack = rm9k_cpu_irq_ack,
+ .end = rm9k_cpu_irq_end,
};
static hw_irq_controller rm9k_perfcounter_irq = {
- "RM9000",
- rm9k_perfcounter_irq_startup,
- rm9k_perfcounter_irq_shutdown,
- rm9k_cpu_irq_enable,
- rm9k_cpu_irq_disable,
- rm9k_cpu_irq_ack,
- rm9k_cpu_irq_end,
+ .typename = "RM9000",
+ .startup = rm9k_perfcounter_irq_startup,
+ .shutdown = rm9k_perfcounter_irq_shutdown,
+ .enable = rm9k_cpu_irq_enable,
+ .disable = rm9k_cpu_irq_disable,
+ .ack = rm9k_cpu_irq_ack,
+ .end = rm9k_cpu_irq_end,
};
unsigned int rm9000_perfcount_irq;
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 2b936cf..5db67e3 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -3,6 +3,8 @@
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
*
* This file define the irq handler for MIPS CPU interrupts.
*
@@ -31,19 +33,21 @@
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/system.h>
static int mips_cpu_irq_base;
static inline void unmask_mips_irq(unsigned int irq)
{
- clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
set_c0_status(0x100 << (irq - mips_cpu_irq_base));
+ irq_enable_hazard();
}
static inline void mask_mips_irq(unsigned int irq)
{
clear_c0_status(0x100 << (irq - mips_cpu_irq_base));
+ irq_disable_hazard();
}
static inline void mips_cpu_irq_enable(unsigned int irq)
@@ -52,6 +56,7 @@
local_irq_save(flags);
unmask_mips_irq(irq);
+ back_to_back_c0_hazard();
local_irq_restore(flags);
}
@@ -61,6 +66,7 @@
local_irq_save(flags);
mask_mips_irq(irq);
+ back_to_back_c0_hazard();
local_irq_restore(flags);
}
@@ -71,7 +77,7 @@
return 0;
}
-#define mips_cpu_irq_shutdown mips_cpu_irq_disable
+#define mips_cpu_irq_shutdown mips_cpu_irq_disable
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
@@ -79,9 +85,6 @@
*/
static void mips_cpu_irq_ack(unsigned int irq)
{
- /* Only necessary for soft interrupts */
- clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
-
mask_mips_irq(irq);
}
@@ -92,22 +95,82 @@
}
static hw_irq_controller mips_cpu_irq_controller = {
- "MIPS",
- mips_cpu_irq_startup,
- mips_cpu_irq_shutdown,
- mips_cpu_irq_enable,
- mips_cpu_irq_disable,
- mips_cpu_irq_ack,
- mips_cpu_irq_end,
- NULL /* no affinity stuff for UP */
+ .typename = "MIPS",
+ .startup = mips_cpu_irq_startup,
+ .shutdown = mips_cpu_irq_shutdown,
+ .enable = mips_cpu_irq_enable,
+ .disable = mips_cpu_irq_disable,
+ .ack = mips_cpu_irq_ack,
+ .end = mips_cpu_irq_end,
};
+/*
+ * Basically the same as above but taking care of all the MT stuff
+ */
+
+#define unmask_mips_mt_irq unmask_mips_irq
+#define mask_mips_mt_irq mask_mips_irq
+#define mips_mt_cpu_irq_enable mips_cpu_irq_enable
+#define mips_mt_cpu_irq_disable mips_cpu_irq_disable
+
+static unsigned int mips_mt_cpu_irq_startup(unsigned int irq)
+{
+ unsigned int vpflags = dvpe();
+
+ clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+ evpe(vpflags);
+ mips_mt_cpu_irq_enable(irq);
+
+ return 0;
+}
+
+#define mips_mt_cpu_irq_shutdown mips_mt_cpu_irq_disable
+
+/*
+ * While we ack the interrupt interrupts are disabled and thus we don't need
+ * to deal with concurrency issues. Same for mips_cpu_irq_end.
+ */
+static void mips_mt_cpu_irq_ack(unsigned int irq)
+{
+ unsigned int vpflags = dvpe();
+ clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+ evpe(vpflags);
+ mask_mips_mt_irq(irq);
+}
+
+#define mips_mt_cpu_irq_end mips_cpu_irq_end
+
+static hw_irq_controller mips_mt_cpu_irq_controller = {
+ .typename = "MIPS",
+ .startup = mips_mt_cpu_irq_startup,
+ .shutdown = mips_mt_cpu_irq_shutdown,
+ .enable = mips_mt_cpu_irq_enable,
+ .disable = mips_mt_cpu_irq_disable,
+ .ack = mips_mt_cpu_irq_ack,
+ .end = mips_mt_cpu_irq_end,
+};
void __init mips_cpu_irq_init(int irq_base)
{
int i;
- for (i = irq_base; i < irq_base + 8; i++) {
+ /* Mask interrupts. */
+ clear_c0_status(ST0_IM);
+ clear_c0_cause(CAUSEF_IP);
+
+ /*
+ * Only MT is using the software interrupts currently, so we just
+ * leave them uninitialized for other processors.
+ */
+ if (cpu_has_mipsmt)
+ for (i = irq_base; i < irq_base + 2; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &mips_mt_cpu_irq_controller;
+ }
+
+ for (i = irq_base + 2; i < irq_base + 8; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index ece4564..330cf84 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -215,81 +215,32 @@
return(n);
}
-struct rusage32 {
- struct compat_timeval ru_utime;
- struct compat_timeval ru_stime;
- int ru_maxrss;
- int ru_ixrss;
- int ru_idrss;
- int ru_isrss;
- int ru_minflt;
- int ru_majflt;
- int ru_nswap;
- int ru_inblock;
- int ru_oublock;
- int ru_msgsnd;
- int ru_msgrcv;
- int ru_nsignals;
- int ru_nvcsw;
- int ru_nivcsw;
-};
-
-static int
-put_rusage (struct rusage32 *ru, struct rusage *r)
-{
- int err;
-
- if (!access_ok(VERIFY_WRITE, ru, sizeof *ru))
- return -EFAULT;
-
- err = __put_user (r->ru_utime.tv_sec, &ru->ru_utime.tv_sec);
- err |= __put_user (r->ru_utime.tv_usec, &ru->ru_utime.tv_usec);
- err |= __put_user (r->ru_stime.tv_sec, &ru->ru_stime.tv_sec);
- err |= __put_user (r->ru_stime.tv_usec, &ru->ru_stime.tv_usec);
- err |= __put_user (r->ru_maxrss, &ru->ru_maxrss);
- err |= __put_user (r->ru_ixrss, &ru->ru_ixrss);
- err |= __put_user (r->ru_idrss, &ru->ru_idrss);
- err |= __put_user (r->ru_isrss, &ru->ru_isrss);
- err |= __put_user (r->ru_minflt, &ru->ru_minflt);
- err |= __put_user (r->ru_majflt, &ru->ru_majflt);
- err |= __put_user (r->ru_nswap, &ru->ru_nswap);
- err |= __put_user (r->ru_inblock, &ru->ru_inblock);
- err |= __put_user (r->ru_oublock, &ru->ru_oublock);
- err |= __put_user (r->ru_msgsnd, &ru->ru_msgsnd);
- err |= __put_user (r->ru_msgrcv, &ru->ru_msgrcv);
- err |= __put_user (r->ru_nsignals, &ru->ru_nsignals);
- err |= __put_user (r->ru_nvcsw, &ru->ru_nvcsw);
- err |= __put_user (r->ru_nivcsw, &ru->ru_nivcsw);
-
- return err;
-}
-
-asmlinkage int
-sys32_wait4(compat_pid_t pid, unsigned int * stat_addr, int options,
- struct rusage32 * ru)
-{
- if (!ru)
- return sys_wait4(pid, stat_addr, options, NULL);
- else {
- struct rusage r;
- int ret;
- unsigned int status;
- mm_segment_t old_fs = get_fs();
-
- set_fs(KERNEL_DS);
- ret = sys_wait4(pid, stat_addr ? &status : NULL, options, &r);
- set_fs(old_fs);
- if (put_rusage (ru, &r)) return -EFAULT;
- if (stat_addr && put_user (status, stat_addr))
- return -EFAULT;
- return ret;
- }
-}
-
asmlinkage int
sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
{
- return sys32_wait4(pid, stat_addr, options, NULL);
+ return compat_sys_wait4(pid, stat_addr, options, NULL);
+}
+
+asmlinkage long
+sysn32_waitid(int which, compat_pid_t pid,
+ siginfo_t __user *uinfo, int options,
+ struct compat_rusage __user *uru)
+{
+ struct rusage ru;
+ long ret;
+ mm_segment_t old_fs = get_fs();
+
+ set_fs (KERNEL_DS);
+ ret = sys_waitid(which, pid, uinfo, options,
+ uru ? (struct rusage __user *) &ru : NULL);
+ set_fs (old_fs);
+
+ if (ret < 0 || uinfo->si_signo == 0)
+ return ret;
+
+ if (uru)
+ ret = put_compat_rusage(&ru, uru);
+ return ret;
}
struct sysinfo32 {
@@ -1467,3 +1418,80 @@
}
return err;
}
+
+struct sigevent32 {
+ u32 sigev_value;
+ u32 sigev_signo;
+ u32 sigev_notify;
+ u32 payload[(64 / 4) - 3];
+};
+
+extern asmlinkage long
+sys_timer_create(clockid_t which_clock,
+ struct sigevent __user *timer_event_spec,
+ timer_t __user * created_timer_id);
+
+long
+sys32_timer_create(u32 clock, struct sigevent32 __user *se32, timer_t __user *timer_id)
+{
+ struct sigevent __user *p = NULL;
+ if (se32) {
+ struct sigevent se;
+ p = compat_alloc_user_space(sizeof(struct sigevent));
+ memset(&se, 0, sizeof(struct sigevent));
+ if (get_user(se.sigev_value.sival_int, &se32->sigev_value) ||
+ __get_user(se.sigev_signo, &se32->sigev_signo) ||
+ __get_user(se.sigev_notify, &se32->sigev_notify) ||
+ __copy_from_user(&se._sigev_un._pad, &se32->payload,
+ sizeof(se32->payload)) ||
+ copy_to_user(p, &se, sizeof(se)))
+ return -EFAULT;
+ }
+ return sys_timer_create(clock, p, timer_id);
+}
+
+asmlinkage long
+sysn32_rt_sigtimedwait(const sigset_t __user *uthese,
+ siginfo_t __user *uinfo,
+ const struct compat_timespec __user *uts32,
+ size_t sigsetsize)
+{
+ struct timespec __user *uts = NULL;
+
+ if (uts32) {
+ struct timespec ts;
+ uts = compat_alloc_user_space(sizeof(struct timespec));
+ if (get_user(ts.tv_sec, &uts32->tv_sec) ||
+ get_user(ts.tv_nsec, &uts32->tv_nsec) ||
+ copy_to_user (uts, &ts, sizeof (ts)))
+ return -EFAULT;
+ }
+ return sys_rt_sigtimedwait(uthese, uinfo, uts, sigsetsize);
+}
+
+save_static_function(sys32_clone);
+__attribute_used__ noinline static int
+_sys32_clone(nabi_no_regargs struct pt_regs regs)
+{
+ unsigned long clone_flags;
+ unsigned long newsp;
+ int __user *parent_tidptr, *child_tidptr;
+
+ clone_flags = regs.regs[4];
+ newsp = regs.regs[5];
+ if (!newsp)
+ newsp = regs.regs[29];
+ parent_tidptr = (int *) regs.regs[6];
+
+ /* Use __dummy4 instead of getting it off the stack, so that
+ syscall() works. */
+ child_tidptr = (int __user *) __dummy4;
+ return do_fork(clone_flags, newsp, ®s, 0,
+ parent_tidptr, child_tidptr);
+}
+
+extern asmlinkage void sys_set_thread_area(u32 addr);
+asmlinkage void sys32_set_thread_area(u32 addr)
+{
+ sys_set_thread_area(AA(addr));
+}
diff --git a/arch/mips/kernel/module-elf32.c b/arch/mips/kernel/module-elf32.c
deleted file mode 100644
index ffd216d..0000000
--- a/arch/mips/kernel/module-elf32.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2001 Rusty Russell.
- * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#undef DEBUG
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-struct mips_hi16 {
- struct mips_hi16 *next;
- Elf32_Addr *addr;
- Elf32_Addr value;
-};
-
-static struct mips_hi16 *mips_hi16_list;
-
-void *module_alloc(unsigned long size)
-{
- if (size == 0)
- return NULL;
- return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
- vfree(module_region);
- /* FIXME: If module_region == mod->init_region, trim exception
- table entries. */
-}
-
-int module_frob_arch_sections(Elf_Ehdr *hdr,
- Elf_Shdr *sechdrs,
- char *secstrings,
- struct module *mod)
-{
- return 0;
-}
-
-static int apply_r_mips_none(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- return 0;
-}
-
-static int apply_r_mips_32(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- *location += v;
-
- return 0;
-}
-
-static int apply_r_mips_26(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- if (v % 4) {
- printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
- return -ENOEXEC;
- }
-
- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
- printk(KERN_ERR
- "module %s: relocation overflow\n",
- me->name);
- return -ENOEXEC;
- }
-
- *location = (*location & ~0x03ffffff) |
- ((*location + (v >> 2)) & 0x03ffffff);
-
- return 0;
-}
-
-static int apply_r_mips_hi16(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- struct mips_hi16 *n;
-
- /*
- * We cannot relocate this one now because we don't know the value of
- * the carry we need to add. Save the information, and let LO16 do the
- * actual relocation.
- */
- n = kmalloc(sizeof *n, GFP_KERNEL);
- if (!n)
- return -ENOMEM;
-
- n->addr = location;
- n->value = v;
- n->next = mips_hi16_list;
- mips_hi16_list = n;
-
- return 0;
-}
-
-static int apply_r_mips_lo16(struct module *me, uint32_t *location,
- Elf32_Addr v)
-{
- unsigned long insnlo = *location;
- Elf32_Addr val, vallo;
-
- /* Sign extend the addend we extract from the lo insn. */
- vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
- if (mips_hi16_list != NULL) {
- struct mips_hi16 *l;
-
- l = mips_hi16_list;
- while (l != NULL) {
- struct mips_hi16 *next;
- unsigned long insn;
-
- /*
- * The value for the HI16 had best be the same.
- */
- if (v != l->value)
- goto out_danger;
-
- /*
- * Do the HI16 relocation. Note that we actually don't
- * need to know anything about the LO16 itself, except
- * where to find the low 16 bits of the addend needed
- * by the LO16.
- */
- insn = *l->addr;
- val = ((insn & 0xffff) << 16) + vallo;
- val += v;
-
- /*
- * Account for the sign extension that will happen in
- * the low bits.
- */
- val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
- insn = (insn & ~0xffff) | val;
- *l->addr = insn;
-
- next = l->next;
- kfree(l);
- l = next;
- }
-
- mips_hi16_list = NULL;
- }
-
- /*
- * Ok, we're done with the HI16 relocs. Now deal with the LO16.
- */
- val = v + vallo;
- insnlo = (insnlo & ~0xffff) | (val & 0xffff);
- *location = insnlo;
-
- return 0;
-
-out_danger:
- printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
- return -ENOEXEC;
-}
-
-static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
- Elf32_Addr v) = {
- [R_MIPS_NONE] = apply_r_mips_none,
- [R_MIPS_32] = apply_r_mips_32,
- [R_MIPS_26] = apply_r_mips_26,
- [R_MIPS_HI16] = apply_r_mips_hi16,
- [R_MIPS_LO16] = apply_r_mips_lo16
-};
-
-int apply_relocate(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
- Elf32_Sym *sym;
- uint32_t *location;
- unsigned int i;
- Elf32_Addr v;
- int res;
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
-
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- Elf32_Word r_info = rel[i].r_info;
-
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to */
- sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
- + ELF32_R_SYM(r_info);
- if (!sym->st_value) {
- printk(KERN_WARNING "%s: Unknown symbol %s\n",
- me->name, strtab + sym->st_name);
- return -ENOENT;
- }
-
- v = sym->st_value;
-
- res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
- if (res)
- return res;
- }
-
- return 0;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- /*
- * Current binutils always generate .rela relocations. Keep smiling
- * if it's empty, abort otherwise.
- */
- if (!sechdrs[relsec].sh_size)
- return 0;
-
- printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
- me->name);
- return -ENOEXEC;
-}
diff --git a/arch/mips/kernel/module-elf64.c b/arch/mips/kernel/module-elf64.c
deleted file mode 100644
index e804792..0000000
--- a/arch/mips/kernel/module-elf64.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2001 Rusty Russell.
- * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#undef DEBUG
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-struct mips_hi16 {
- struct mips_hi16 *next;
- Elf32_Addr *addr;
- Elf64_Addr value;
-};
-
-static struct mips_hi16 *mips_hi16_list;
-
-void *module_alloc(unsigned long size)
-{
- if (size == 0)
- return NULL;
- return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
- vfree(module_region);
- /* FIXME: If module_region == mod->init_region, trim exception
- table entries. */
-}
-
-int module_frob_arch_sections(Elf_Ehdr *hdr,
- Elf_Shdr *sechdrs,
- char *secstrings,
- struct module *mod)
-{
- return 0;
-}
-
-int apply_relocate(Elf64_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- /*
- * We don't want to deal with REL relocations - RELA is so much saner.
- */
- if (!sechdrs[relsec].sh_size)
- return 0;
-
- printk(KERN_ERR "module %s: REL relocation unsupported\n",
- me->name);
- return -ENOEXEC;
-}
-
-static int apply_r_mips_none(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- return 0;
-}
-
-static int apply_r_mips_32(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- *location = v;
-
- return 0;
-}
-
-static int apply_r_mips_26(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- if (v % 4) {
- printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
- return -ENOEXEC;
- }
-
- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
- printk(KERN_ERR
- "module %s: relocation overflow\n",
- me->name);
- return -ENOEXEC;
- }
-
- *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
-
- return 0;
-}
-
-static int apply_r_mips_hi16(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- struct mips_hi16 *n;
-
- /*
- * We cannot relocate this one now because we don't know the value of
- * the carry we need to add. Save the information, and let LO16 do the
- * actual relocation.
- */
- n = kmalloc(sizeof *n, GFP_KERNEL);
- if (!n)
- return -ENOMEM;
-
- n->addr = location;
- n->value = v;
- n->next = mips_hi16_list;
- mips_hi16_list = n;
-
- return 0;
-}
-
-static int apply_r_mips_lo16(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- unsigned long insnlo = *location;
- Elf32_Addr val, vallo;
-
- /* Sign extend the addend we extract from the lo insn. */
- vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
- if (mips_hi16_list != NULL) {
- struct mips_hi16 *l;
-
- l = mips_hi16_list;
- while (l != NULL) {
- struct mips_hi16 *next;
- unsigned long insn;
-
- /*
- * The value for the HI16 had best be the same.
- */
- if (v != l->value)
- goto out_danger;
-
- /*
- * Do the HI16 relocation. Note that we actually don't
- * need to know anything about the LO16 itself, except
- * where to find the low 16 bits of the addend needed
- * by the LO16.
- */
- insn = *l->addr;
- val = ((insn & 0xffff) << 16) + vallo;
- val += v;
-
- /*
- * Account for the sign extension that will happen in
- * the low bits.
- */
- val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
- insn = (insn & ~0xffff) | val;
- *l->addr = insn;
-
- next = l->next;
- kfree(l);
- l = next;
- }
-
- mips_hi16_list = NULL;
- }
-
- /*
- * Ok, we're done with the HI16 relocs. Now deal with the LO16.
- */
- insnlo = (insnlo & ~0xffff) | (v & 0xffff);
- *location = insnlo;
-
- return 0;
-
-out_danger:
- printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
- return -ENOEXEC;
-}
-
-static int apply_r_mips_64(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- *(uint64_t *) location = v;
-
- return 0;
-}
-
-
-static int apply_r_mips_higher(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- *location = (*location & 0xffff0000) |
- ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
-
- return 0;
-}
-
-static int apply_r_mips_highest(struct module *me, uint32_t *location,
- Elf64_Addr v)
-{
- *location = (*location & 0xffff0000) |
- ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
-
- return 0;
-}
-
-static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
- Elf64_Addr v) = {
- [R_MIPS_NONE] = apply_r_mips_none,
- [R_MIPS_32] = apply_r_mips_32,
- [R_MIPS_26] = apply_r_mips_26,
- [R_MIPS_HI16] = apply_r_mips_hi16,
- [R_MIPS_LO16] = apply_r_mips_lo16,
- [R_MIPS_64] = apply_r_mips_64,
- [R_MIPS_HIGHER] = apply_r_mips_higher,
- [R_MIPS_HIGHEST] = apply_r_mips_highest
-};
-
-int apply_relocate_add(Elf64_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- Elf64_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
- Elf64_Sym *sym;
- uint32_t *location;
- unsigned int i;
- Elf64_Addr v;
- int res;
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
-
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to */
- sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + rel[i].r_sym;
- if (!sym->st_value) {
- printk(KERN_WARNING "%s: Unknown symbol %s\n",
- me->name, strtab + sym->st_name);
- return -ENOENT;
- }
-
- v = sym->st_value;
-
- res = reloc_handlers[rel[i].r_type](me, location, v);
- if (res)
- return res;
- }
-
- return 0;
-}
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 458af3c..e54a7f4 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -1,9 +1,345 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2001 Rusty Russell.
+ * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005 Thiemo Seufer
+ */
+
+#undef DEBUG
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+struct mips_hi16 {
+ struct mips_hi16 *next;
+ Elf_Addr *addr;
+ Elf_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+
static LIST_HEAD(dbe_list);
static DEFINE_SPINLOCK(dbe_lock);
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ table entries. */
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ char *secstrings, struct module *mod)
+{
+ return 0;
+}
+
+static int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
+{
+ return 0;
+}
+
+static int apply_r_mips_32_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ *location += v;
+
+ return 0;
+}
+
+static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ *location = v;
+
+ return 0;
+}
+
+static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ if (v % 4) {
+ printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+ return -ENOEXEC;
+ }
+
+ if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ printk(KERN_ERR
+ "module %s: relocation overflow\n",
+ me->name);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & ~0x03ffffff) |
+ ((*location + (v >> 2)) & 0x03ffffff);
+
+ return 0;
+}
+
+static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ if (v % 4) {
+ printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+ return -ENOEXEC;
+ }
+
+ if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ printk(KERN_ERR
+ "module %s: relocation overflow\n",
+ me->name);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
+
+ return 0;
+}
+
+static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ struct mips_hi16 *n;
+
+ /*
+ * We cannot relocate this one now because we don't know the value of
+ * the carry we need to add. Save the information, and let LO16 do the
+ * actual relocation.
+ */
+ n = kmalloc(sizeof *n, GFP_KERNEL);
+ if (!n)
+ return -ENOMEM;
+
+ n->addr = (Elf_Addr *)location;
+ n->value = v;
+ n->next = mips_hi16_list;
+ mips_hi16_list = n;
+
+ return 0;
+}
+
+static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ *location = (*location & 0xffff0000) |
+ ((((long long) v + 0x8000LL) >> 16) & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ unsigned long insnlo = *location;
+ Elf_Addr val, vallo;
+
+ /* Sign extend the addend we extract from the lo insn. */
+ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+ if (mips_hi16_list != NULL) {
+ struct mips_hi16 *l;
+
+ l = mips_hi16_list;
+ while (l != NULL) {
+ struct mips_hi16 *next;
+ unsigned long insn;
+
+ /*
+ * The value for the HI16 had best be the same.
+ */
+ if (v != l->value)
+ goto out_danger;
+
+ /*
+ * Do the HI16 relocation. Note that we actually don't
+ * need to know anything about the LO16 itself, except
+ * where to find the low 16 bits of the addend needed
+ * by the LO16.
+ */
+ insn = *l->addr;
+ val = ((insn & 0xffff) << 16) + vallo;
+ val += v;
+
+ /*
+ * Account for the sign extension that will happen in
+ * the low bits.
+ */
+ val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+ insn = (insn & ~0xffff) | val;
+ *l->addr = insn;
+
+ next = l->next;
+ kfree(l);
+ l = next;
+ }
+
+ mips_hi16_list = NULL;
+ }
+
+ /*
+ * Ok, we're done with the HI16 relocs. Now deal with the LO16.
+ */
+ val = v + vallo;
+ insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+ *location = insnlo;
+
+ return 0;
+
+out_danger:
+ printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+ return -ENOEXEC;
+}
+
+static int apply_r_mips_lo16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ *location = (*location & 0xffff0000) | (v & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_64_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ *(Elf_Addr *)location = v;
+
+ return 0;
+}
+
+static int apply_r_mips_higher_rela(struct module *me, u32 *location,
+ Elf_Addr v)
+{
+ *location = (*location & 0xffff0000) |
+ ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_highest_rela(struct module *me, u32 *location,
+ Elf_Addr v)
+{
+ *location = (*location & 0xffff0000) |
+ ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
+
+ return 0;
+}
+
+static int (*reloc_handlers_rel[]) (struct module *me, u32 *location,
+ Elf_Addr v) = {
+ [R_MIPS_NONE] = apply_r_mips_none,
+ [R_MIPS_32] = apply_r_mips_32_rel,
+ [R_MIPS_26] = apply_r_mips_26_rel,
+ [R_MIPS_HI16] = apply_r_mips_hi16_rel,
+ [R_MIPS_LO16] = apply_r_mips_lo16_rel
+};
+
+static int (*reloc_handlers_rela[]) (struct module *me, u32 *location,
+ Elf_Addr v) = {
+ [R_MIPS_NONE] = apply_r_mips_none,
+ [R_MIPS_32] = apply_r_mips_32_rela,
+ [R_MIPS_26] = apply_r_mips_26_rela,
+ [R_MIPS_HI16] = apply_r_mips_hi16_rela,
+ [R_MIPS_LO16] = apply_r_mips_lo16_rela,
+ [R_MIPS_64] = apply_r_mips_64_rela,
+ [R_MIPS_HIGHER] = apply_r_mips_higher_rela,
+ [R_MIPS_HIGHEST] = apply_r_mips_highest_rela
+};
+
+int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *me)
+{
+ Elf_Mips_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+ Elf_Sym *sym;
+ u32 *location;
+ unsigned int i;
+ Elf_Addr v;
+ int res;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to */
+ sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ + ELF_MIPS_R_SYM(rel[i]);
+ if (!sym->st_value) {
+ printk(KERN_WARNING "%s: Unknown symbol %s\n",
+ me->name, strtab + sym->st_name);
+ return -ENOENT;
+ }
+
+ v = sym->st_value;
+
+ res = reloc_handlers_rel[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *me)
+{
+ Elf_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
+ Elf_Sym *sym;
+ u32 *location;
+ unsigned int i;
+ Elf_Addr v;
+ int res;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to */
+ sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ + ELF_MIPS_R_SYM(rel[i]);
+ if (!sym->st_value) {
+ printk(KERN_WARNING "%s: Unknown symbol %s\n",
+ me->name, strtab + sym->st_name);
+ return -ENOENT;
+ }
+
+ v = sym->st_value + rel[i].r_addend;
+
+ res = reloc_handlers_rela[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
/* Given an address, look for it in the module exception tables. */
const struct exception_table_entry *search_module_dbetables(unsigned long addr)
{
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 0f159f3..86fe15b 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -2,7 +2,8 @@
* linux/arch/mips/kernel/proc.c
*
* Copyright (C) 1995, 1996, 2001 Ralf Baechle
- * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#include <linux/config.h>
#include <linux/delay.h>
@@ -19,63 +20,69 @@
unsigned int vced_count, vcei_count;
static const char *cpu_name[] = {
- [CPU_UNKNOWN] "unknown",
- [CPU_R2000] "R2000",
- [CPU_R3000] "R3000",
- [CPU_R3000A] "R3000A",
- [CPU_R3041] "R3041",
- [CPU_R3051] "R3051",
- [CPU_R3052] "R3052",
- [CPU_R3081] "R3081",
- [CPU_R3081E] "R3081E",
- [CPU_R4000PC] "R4000PC",
- [CPU_R4000SC] "R4000SC",
- [CPU_R4000MC] "R4000MC",
- [CPU_R4200] "R4200",
- [CPU_R4400PC] "R4400PC",
- [CPU_R4400SC] "R4400SC",
- [CPU_R4400MC] "R4400MC",
- [CPU_R4600] "R4600",
- [CPU_R6000] "R6000",
- [CPU_R6000A] "R6000A",
- [CPU_R8000] "R8000",
- [CPU_R10000] "R10000",
- [CPU_R12000] "R12000",
- [CPU_R4300] "R4300",
- [CPU_R4650] "R4650",
- [CPU_R4700] "R4700",
- [CPU_R5000] "R5000",
- [CPU_R5000A] "R5000A",
- [CPU_R4640] "R4640",
- [CPU_NEVADA] "Nevada",
- [CPU_RM7000] "RM7000",
- [CPU_RM9000] "RM9000",
- [CPU_R5432] "R5432",
- [CPU_4KC] "MIPS 4Kc",
- [CPU_5KC] "MIPS 5Kc",
- [CPU_R4310] "R4310",
- [CPU_SB1] "SiByte SB1",
- [CPU_TX3912] "TX3912",
- [CPU_TX3922] "TX3922",
- [CPU_TX3927] "TX3927",
- [CPU_AU1000] "Au1000",
- [CPU_AU1500] "Au1500",
- [CPU_4KEC] "MIPS 4KEc",
- [CPU_4KSC] "MIPS 4KSc",
- [CPU_VR41XX] "NEC Vr41xx",
- [CPU_R5500] "R5500",
- [CPU_TX49XX] "TX49xx",
- [CPU_20KC] "MIPS 20Kc",
- [CPU_24K] "MIPS 24K",
- [CPU_25KF] "MIPS 25Kf",
- [CPU_VR4111] "NEC VR4111",
- [CPU_VR4121] "NEC VR4121",
- [CPU_VR4122] "NEC VR4122",
- [CPU_VR4131] "NEC VR4131",
- [CPU_VR4133] "NEC VR4133",
- [CPU_VR4181] "NEC VR4181",
- [CPU_VR4181A] "NEC VR4181A",
- [CPU_SR71000] "Sandcraft SR71000"
+ [CPU_UNKNOWN] = "unknown",
+ [CPU_R2000] = "R2000",
+ [CPU_R3000] = "R3000",
+ [CPU_R3000A] = "R3000A",
+ [CPU_R3041] = "R3041",
+ [CPU_R3051] = "R3051",
+ [CPU_R3052] = "R3052",
+ [CPU_R3081] = "R3081",
+ [CPU_R3081E] = "R3081E",
+ [CPU_R4000PC] = "R4000PC",
+ [CPU_R4000SC] = "R4000SC",
+ [CPU_R4000MC] = "R4000MC",
+ [CPU_R4200] = "R4200",
+ [CPU_R4400PC] = "R4400PC",
+ [CPU_R4400SC] = "R4400SC",
+ [CPU_R4400MC] = "R4400MC",
+ [CPU_R4600] = "R4600",
+ [CPU_R6000] = "R6000",
+ [CPU_R6000A] = "R6000A",
+ [CPU_R8000] = "R8000",
+ [CPU_R10000] = "R10000",
+ [CPU_R12000] = "R12000",
+ [CPU_R4300] = "R4300",
+ [CPU_R4650] = "R4650",
+ [CPU_R4700] = "R4700",
+ [CPU_R5000] = "R5000",
+ [CPU_R5000A] = "R5000A",
+ [CPU_R4640] = "R4640",
+ [CPU_NEVADA] = "Nevada",
+ [CPU_RM7000] = "RM7000",
+ [CPU_RM9000] = "RM9000",
+ [CPU_R5432] = "R5432",
+ [CPU_4KC] = "MIPS 4Kc",
+ [CPU_5KC] = "MIPS 5Kc",
+ [CPU_R4310] = "R4310",
+ [CPU_SB1] = "SiByte SB1",
+ [CPU_SB1A] = "SiByte SB1A",
+ [CPU_TX3912] = "TX3912",
+ [CPU_TX3922] = "TX3922",
+ [CPU_TX3927] = "TX3927",
+ [CPU_AU1000] = "Au1000",
+ [CPU_AU1500] = "Au1500",
+ [CPU_AU1100] = "Au1100",
+ [CPU_AU1550] = "Au1550",
+ [CPU_AU1200] = "Au1200",
+ [CPU_4KEC] = "MIPS 4KEc",
+ [CPU_4KSC] = "MIPS 4KSc",
+ [CPU_VR41XX] = "NEC Vr41xx",
+ [CPU_R5500] = "R5500",
+ [CPU_TX49XX] = "TX49xx",
+ [CPU_20KC] = "MIPS 20Kc",
+ [CPU_24K] = "MIPS 24K",
+ [CPU_25KF] = "MIPS 25Kf",
+ [CPU_34K] = "MIPS 34K",
+ [CPU_VR4111] = "NEC VR4111",
+ [CPU_VR4121] = "NEC VR4121",
+ [CPU_VR4122] = "NEC VR4122",
+ [CPU_VR4131] = "NEC VR4131",
+ [CPU_VR4133] = "NEC VR4133",
+ [CPU_VR4181] = "NEC VR4181",
+ [CPU_VR4181A] = "NEC VR4181A",
+ [CPU_SR71000] = "Sandcraft SR71000",
+ [CPU_PR4450] = "Philips PR4450",
};
@@ -105,8 +112,8 @@
(version >> 4) & 0x0f, version & 0x0f,
(fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
- loops_per_jiffy / (500000/HZ),
- (loops_per_jiffy / (5000/HZ)) % 100);
+ cpu_data[n].udelay_val / (500000/HZ),
+ (cpu_data[n].udelay_val / (5000/HZ)) % 100);
seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
seq_printf(m, "microsecond timers\t: %s\n",
cpu_has_counter ? "yes" : "no");
@@ -115,6 +122,14 @@
cpu_has_divec ? "yes" : "no");
seq_printf(m, "hardware watchpoint\t: %s\n",
cpu_has_watch ? "yes" : "no");
+ seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n",
+ cpu_has_mips16 ? " mips16" : "",
+ cpu_has_mdmx ? " mdmx" : "",
+ cpu_has_mips3d ? " mips3d" : "",
+ cpu_has_smartmips ? " smartmips" : "",
+ cpu_has_dsp ? " dsp" : "",
+ cpu_has_mipsmt ? " mt" : ""
+ );
sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
cpu_has_vce ? "%u" : "not available");
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index e4f2f80..4fe3d57 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -25,8 +25,10 @@
#include <linux/init.h>
#include <linux/completion.h>
+#include <asm/abi.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
+#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -39,14 +41,6 @@
#include <asm/inst.h>
/*
- * We use this if we don't have any better idle routine..
- * (This to kill: kernel/platform.c.
- */
-void default_idle (void)
-{
-}
-
-/*
* The idle thread. There's no useful work to be done, so just try to conserve
* power and have a low exit latency (ie sit in a loop waiting for somebody to
* say that they'd like to reschedule)
@@ -62,6 +56,54 @@
}
}
+extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
+
+/*
+ * Native o32 and N64 ABI without DSP ASE
+ */
+extern int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set);
+extern int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi = {
+ .do_signal = do_signal,
+#ifdef CONFIG_TRAD_SIGNALS
+ .setup_frame = setup_frame,
+#endif
+ .setup_rt_frame = setup_rt_frame
+};
+
+#ifdef CONFIG_MIPS32_O32
+/*
+ * o32 compatibility on 64-bit kernels, without DSP ASE
+ */
+extern int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set);
+extern int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi_32 = {
+ .do_signal = do_signal32,
+ .setup_frame = setup_frame_32,
+ .setup_rt_frame = setup_rt_frame_32
+};
+#endif /* CONFIG_MIPS32_O32 */
+
+#ifdef CONFIG_MIPS32_N32
+/*
+ * N32 on 64-bit kernels, without DSP ASE
+ */
+extern int setup_rt_frame_n32(struct k_sigaction * ka, struct pt_regs *regs,
+ int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi_n32 = {
+ .do_signal = do_signal,
+ .setup_rt_frame = setup_rt_frame_n32
+};
+#endif /* CONFIG_MIPS32_N32 */
+
asmlinkage void ret_from_fork(void);
void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
@@ -78,6 +120,8 @@
regs->cp0_status = status;
clear_used_math();
lose_fpu();
+ if (cpu_has_dsp)
+ __init_dsp();
regs->cp0_epc = pc;
regs->regs[29] = sp;
current_thread_info()->addr_limit = USER_DS;
@@ -97,14 +141,17 @@
struct thread_info *ti = p->thread_info;
struct pt_regs *childregs;
long childksp;
+ p->set_child_tid = p->clear_child_tid = NULL;
childksp = (unsigned long)ti + THREAD_SIZE - 32;
preempt_disable();
- if (is_fpu_owner()) {
+ if (is_fpu_owner())
save_fp(p);
- }
+
+ if (cpu_has_dsp)
+ save_dsp(p);
preempt_enable();
@@ -142,6 +189,9 @@
childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
clear_tsk_thread_flag(p, TIF_USEDFPU);
+ if (clone_flags & CLONE_SETTLS)
+ ti->tp_value = regs->regs[7];
+
return 0;
}
@@ -175,6 +225,14 @@
#endif
}
+int dump_task_regs (struct task_struct *tsk, elf_gregset_t *regs)
+{
+ struct thread_info *ti = tsk->thread_info;
+ long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+ dump_regs(&(*regs)[0], (struct pt_regs *) ksp - 1);
+ return 1;
+}
+
int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr)
{
memcpy(fpr, &t->thread.fpu, sizeof(current->thread.fpu));
@@ -211,22 +269,48 @@
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
}
-struct mips_frame_info {
+static struct mips_frame_info {
+ void *func;
+ int omit_fp; /* compiled without fno-omit-frame-pointer */
int frame_offset;
int pc_offset;
+} schedule_frame, mfinfo[] = {
+ { schedule, 0 }, /* must be first */
+ /* arch/mips/kernel/semaphore.c */
+ { __down, 1 },
+ { __down_interruptible, 1 },
+ /* kernel/sched.c */
+#ifdef CONFIG_PREEMPT
+ { preempt_schedule, 0 },
+#endif
+ { wait_for_completion, 0 },
+ { interruptible_sleep_on, 0 },
+ { interruptible_sleep_on_timeout, 0 },
+ { sleep_on, 0 },
+ { sleep_on_timeout, 0 },
+ { yield, 0 },
+ { io_schedule, 0 },
+ { io_schedule_timeout, 0 },
+#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT)
+ { __preempt_spin_lock, 0 },
+ { __preempt_write_lock, 0 },
+#endif
+ /* kernel/timer.c */
+ { schedule_timeout, 1 },
+/* { nanosleep_restart, 1 }, */
+ /* lib/rwsem-spinlock.c */
+ { __down_read, 1 },
+ { __down_write, 1 },
};
-static struct mips_frame_info schedule_frame;
-static struct mips_frame_info schedule_timeout_frame;
-static struct mips_frame_info sleep_on_frame;
-static struct mips_frame_info sleep_on_timeout_frame;
-static struct mips_frame_info wait_for_completion_frame;
+
static int mips_frame_info_initialized;
-static int __init get_frame_info(struct mips_frame_info *info, void *func)
+static int __init get_frame_info(struct mips_frame_info *info)
{
int i;
+ void *func = info->func;
union mips_instruction *ip = (union mips_instruction *)func;
info->pc_offset = -1;
- info->frame_offset = -1;
+ info->frame_offset = info->omit_fp ? 0 : -1;
for (i = 0; i < 128; i++, ip++) {
/* if jal, jalr, jr, stop. */
if (ip->j_format.opcode == jal_op ||
@@ -247,14 +331,16 @@
/* sw / sd $ra, offset($sp) */
if (ip->i_format.rt == 31) {
if (info->pc_offset != -1)
- break;
+ continue;
info->pc_offset =
ip->i_format.simmediate / sizeof(long);
}
/* sw / sd $s8, offset($sp) */
if (ip->i_format.rt == 30) {
+//#if 0 /* gcc 3.4 does aggressive optimization... */
if (info->frame_offset != -1)
- break;
+ continue;
+//#endif
info->frame_offset =
ip->i_format.simmediate / sizeof(long);
}
@@ -272,13 +358,25 @@
static int __init frame_info_init(void)
{
- mips_frame_info_initialized =
- !get_frame_info(&schedule_frame, schedule) &&
- !get_frame_info(&schedule_timeout_frame, schedule_timeout) &&
- !get_frame_info(&sleep_on_frame, sleep_on) &&
- !get_frame_info(&sleep_on_timeout_frame, sleep_on_timeout) &&
- !get_frame_info(&wait_for_completion_frame, wait_for_completion);
-
+ int i, found;
+ for (i = 0; i < ARRAY_SIZE(mfinfo); i++)
+ if (get_frame_info(&mfinfo[i]))
+ return -1;
+ schedule_frame = mfinfo[0];
+ /* bubble sort */
+ do {
+ struct mips_frame_info tmp;
+ found = 0;
+ for (i = 1; i < ARRAY_SIZE(mfinfo); i++) {
+ if (mfinfo[i-1].func > mfinfo[i].func) {
+ tmp = mfinfo[i];
+ mfinfo[i] = mfinfo[i-1];
+ mfinfo[i-1] = tmp;
+ found = 1;
+ }
+ }
+ } while (found);
+ mips_frame_info_initialized = 1;
return 0;
}
@@ -303,60 +401,39 @@
/* get_wchan - a maintenance nightmare^W^Wpain in the ass ... */
unsigned long get_wchan(struct task_struct *p)
{
+ unsigned long stack_page;
unsigned long frame, pc;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
- if (!mips_frame_info_initialized)
+ stack_page = (unsigned long)p->thread_info;
+ if (!stack_page || !mips_frame_info_initialized)
return 0;
+
pc = thread_saved_pc(p);
if (!in_sched_functions(pc))
- goto out;
+ return pc;
- if (pc >= (unsigned long) sleep_on_timeout)
- goto schedule_timeout_caller;
- if (pc >= (unsigned long) sleep_on)
- goto schedule_caller;
- if (pc >= (unsigned long) interruptible_sleep_on_timeout)
- goto schedule_timeout_caller;
- if (pc >= (unsigned long)interruptible_sleep_on)
- goto schedule_caller;
- if (pc >= (unsigned long)wait_for_completion)
- goto schedule_caller;
- goto schedule_timeout_caller;
-
-schedule_caller:
frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
- if (pc >= (unsigned long) sleep_on)
- pc = ((unsigned long *)frame)[sleep_on_frame.pc_offset];
- else
- pc = ((unsigned long *)frame)[wait_for_completion_frame.pc_offset];
- goto out;
+ do {
+ int i;
-schedule_timeout_caller:
- /*
- * The schedule_timeout frame
- */
- frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
+ if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32)
+ return 0;
- /*
- * frame now points to sleep_on_timeout's frame
- */
- pc = ((unsigned long *)frame)[schedule_timeout_frame.pc_offset];
+ for (i = ARRAY_SIZE(mfinfo) - 1; i >= 0; i--) {
+ if (pc >= (unsigned long) mfinfo[i].func)
+ break;
+ }
+ if (i < 0)
+ break;
- if (in_sched_functions(pc)) {
- /* schedule_timeout called by [interruptible_]sleep_on_timeout */
- frame = ((unsigned long *)frame)[schedule_timeout_frame.frame_offset];
- pc = ((unsigned long *)frame)[sleep_on_timeout_frame.pc_offset];
- }
-
-out:
-
-#ifdef CONFIG_64BIT
- if (current->thread.mflags & MF_32BIT_REGS) /* Kludge for 32-bit ps */
- pc &= 0xffffffffUL;
-#endif
+ if (mfinfo[i].omit_fp)
+ break;
+ pc = ((unsigned long *)frame)[mfinfo[i].pc_offset];
+ frame = ((unsigned long *)frame)[mfinfo[i].frame_offset];
+ } while (in_sched_functions(pc));
return pc;
}
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 0b571a5..f1b0f3e 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -28,14 +28,18 @@
#include <linux/security.h>
#include <linux/signal.h>
+#include <asm/byteorder.h>
#include <asm/cpu.h>
+#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
+#include <asm/reg.h>
/*
* Called by kernel/ptrace.c when detaching..
@@ -47,7 +51,130 @@
/* Nothing to do.. */
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+/*
+ * Read a general register set. We always use the 64-bit format, even
+ * for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
+ * Registers are sign extended to fill the available space.
+ */
+int ptrace_getregs (struct task_struct *child, __s64 __user *data)
+{
+ struct pt_regs *regs;
+ int i;
+
+ if (!access_ok(VERIFY_WRITE, data, 38 * 8))
+ return -EIO;
+
+ regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+ THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+ for (i = 0; i < 32; i++)
+ __put_user (regs->regs[i], data + i);
+ __put_user (regs->lo, data + EF_LO - EF_R0);
+ __put_user (regs->hi, data + EF_HI - EF_R0);
+ __put_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+ __put_user (regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
+ __put_user (regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
+ __put_user (regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
+
+ return 0;
+}
+
+/*
+ * Write a general register set. As for PTRACE_GETREGS, we always use
+ * the 64-bit format. On a 32-bit kernel only the lower order half
+ * (according to endianness) will be used.
+ */
+int ptrace_setregs (struct task_struct *child, __s64 __user *data)
+{
+ struct pt_regs *regs;
+ int i;
+
+ if (!access_ok(VERIFY_READ, data, 38 * 8))
+ return -EIO;
+
+ regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+ THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+ for (i = 0; i < 32; i++)
+ __get_user (regs->regs[i], data + i);
+ __get_user (regs->lo, data + EF_LO - EF_R0);
+ __get_user (regs->hi, data + EF_HI - EF_R0);
+ __get_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+
+ /* badvaddr, status, and cause may not be written. */
+
+ return 0;
+}
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data)
+{
+ int i;
+
+ if (!access_ok(VERIFY_WRITE, data, 33 * 8))
+ return -EIO;
+
+ if (tsk_used_math(child)) {
+ fpureg_t *fregs = get_fpu_regs(child);
+ for (i = 0; i < 32; i++)
+ __put_user (fregs[i], i + (__u64 __user *) data);
+ } else {
+ for (i = 0; i < 32; i++)
+ __put_user ((__u64) -1, i + (__u64 __user *) data);
+ }
+
+ if (cpu_has_fpu) {
+ unsigned int flags, tmp;
+
+ __put_user (child->thread.fpu.hard.fcr31, data + 64);
+
+ preempt_disable();
+ if (cpu_has_mipsmt) {
+ unsigned int vpflags = dvpe();
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+ write_c0_status(flags);
+ evpe(vpflags);
+ } else {
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+ write_c0_status(flags);
+ }
+ preempt_enable();
+ __put_user (tmp, data + 65);
+ } else {
+ __put_user (child->thread.fpu.soft.fcr31, data + 64);
+ __put_user ((__u32) 0, data + 65);
+ }
+
+ return 0;
+}
+
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data)
+{
+ fpureg_t *fregs;
+ int i;
+
+ if (!access_ok(VERIFY_READ, data, 33 * 8))
+ return -EIO;
+
+ fregs = get_fpu_regs(child);
+
+ for (i = 0; i < 32; i++)
+ __get_user (fregs[i], i + (__u64 __user *) data);
+
+ if (cpu_has_fpu)
+ __get_user (child->thread.fpu.hard.fcr31, data + 64);
+ else
+ __get_user (child->thread.fpu.soft.fcr31, data + 64);
+
+ /* FIR may not be written. */
+
+ return 0;
+}
+
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret;
@@ -103,7 +230,7 @@
ret = -EIO;
if (copied != sizeof(tmp))
break;
- ret = put_user(tmp,(unsigned long *) data);
+ ret = put_user(tmp,(unsigned long __user *) data);
break;
}
@@ -169,18 +296,53 @@
if (!cpu_has_fpu)
break;
- flags = read_c0_status();
- __enable_fpu();
- __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
- write_c0_status(flags);
+ preempt_disable();
+ if (cpu_has_mipsmt) {
+ unsigned int vpflags = dvpe();
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+ write_c0_status(flags);
+ evpe(vpflags);
+ } else {
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+ write_c0_status(flags);
+ }
+ preempt_enable();
break;
}
+ case DSP_BASE ... DSP_BASE + 5: {
+ dspreg_t *dregs;
+
+ if (!cpu_has_dsp) {
+ tmp = 0;
+ ret = -EIO;
+ goto out_tsk;
+ }
+ if (child->thread.dsp.used_dsp) {
+ dregs = __get_dsp_regs(child);
+ tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+ } else {
+ tmp = -1; /* DSP registers yet used */
+ }
+ break;
+ }
+ case DSP_CONTROL:
+ if (!cpu_has_dsp) {
+ tmp = 0;
+ ret = -EIO;
+ goto out_tsk;
+ }
+ tmp = child->thread.dsp.dspcontrol;
+ break;
default:
tmp = 0;
ret = -EIO;
goto out_tsk;
}
- ret = put_user(tmp, (unsigned long *) data);
+ ret = put_user(tmp, (unsigned long __user *) data);
break;
}
@@ -247,6 +409,25 @@
else
child->thread.fpu.soft.fcr31 = data;
break;
+ case DSP_BASE ... DSP_BASE + 5: {
+ dspreg_t *dregs;
+
+ if (!cpu_has_dsp) {
+ ret = -EIO;
+ break;
+ }
+
+ dregs = __get_dsp_regs(child);
+ dregs[addr - DSP_BASE] = data;
+ break;
+ }
+ case DSP_CONTROL:
+ if (!cpu_has_dsp) {
+ ret = -EIO;
+ break;
+ }
+ child->thread.dsp.dspcontrol = data;
+ break;
default:
/* The rest are not allowed. */
ret = -EIO;
@@ -255,6 +436,22 @@
break;
}
+ case PTRACE_GETREGS:
+ ret = ptrace_getregs (child, (__u64 __user *) data);
+ break;
+
+ case PTRACE_SETREGS:
+ ret = ptrace_setregs (child, (__u64 __user *) data);
+ break;
+
+ case PTRACE_GETFPREGS:
+ ret = ptrace_getfpregs (child, (__u32 __user *) data);
+ break;
+
+ case PTRACE_SETFPREGS:
+ ret = ptrace_setfpregs (child, (__u32 __user *) data);
+ break;
+
case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
case PTRACE_CONT: { /* restart after signal. */
ret = -EIO;
@@ -289,6 +486,11 @@
ret = ptrace_detach(child, data);
break;
+ case PTRACE_GET_THREAD_AREA:
+ ret = put_user(child->thread_info->tp_value,
+ (unsigned long __user *) data);
+ break;
+
default:
ret = ptrace_request(child, request, addr, data);
break;
@@ -303,21 +505,14 @@
static inline int audit_arch(void)
{
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ int arch = EM_MIPS;
#ifdef CONFIG_64BIT
- if (!(current->thread.mflags & MF_32BIT_REGS))
- return AUDIT_ARCH_MIPSEL64;
-#endif /* MIPS64 */
- return AUDIT_ARCH_MIPSEL;
-
-#else /* big endian... */
-#ifdef CONFIG_64BIT
- if (!(current->thread.mflags & MF_32BIT_REGS))
- return AUDIT_ARCH_MIPS64;
-#endif /* MIPS64 */
- return AUDIT_ARCH_MIPS;
-
-#endif /* endian */
+ arch |= __AUDIT_ARCH_64BIT;
+#endif
+#if defined(__LITTLE_ENDIAN)
+ arch |= __AUDIT_ARCH_LE;
+#endif
+ return arch;
}
/*
@@ -327,12 +522,13 @@
asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
{
if (unlikely(current->audit_context) && entryexit)
- audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]), regs->regs[2]);
+ audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]),
+ regs->regs[2]);
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- goto out;
if (!(current->ptrace & PT_PTRACED))
goto out;
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ goto out;
/* The 0x80 provides a way for the tracing parent to distinguish
between a syscall stop and SIGTRAP delivery */
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index eee2079..9a9b049 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -24,17 +24,24 @@
#include <linux/smp_lock.h>
#include <linux/user.h>
#include <linux/security.h>
-#include <linux/signal.h>
#include <asm/cpu.h>
+#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
+int ptrace_getregs (struct task_struct *child, __s64 __user *data);
+int ptrace_setregs (struct task_struct *child, __s64 __user *data);
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data);
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data);
+
/*
* Tracing a 32-bit process with a 64-bit strace and vice versa will not
* work. I don't know how to fix this.
@@ -99,6 +106,35 @@
break;
}
+ /*
+ * Read 4 bytes of the other process' storage
+ * data is a pointer specifying where the user wants the
+ * 4 bytes copied into
+ * addr is a pointer in the user's storage that contains an 8 byte
+ * address in the other process of the 4 bytes that is to be read
+ * (this is run in a 32-bit process looking at a 64-bit process)
+ * when I and D space are separate, these will need to be fixed.
+ */
+ case PTRACE_PEEKTEXT_3264:
+ case PTRACE_PEEKDATA_3264: {
+ u32 tmp;
+ int copied;
+ u32 __user * addrOthers;
+
+ ret = -EIO;
+
+ /* Get the addr in the other process that we want to read */
+ if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+ break;
+
+ copied = access_process_vm(child, (u64)addrOthers, &tmp,
+ sizeof(tmp), 0);
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (u32 __user *) (unsigned long) data);
+ break;
+ }
+
/* Read the word at location addr in the USER area. */
case PTRACE_PEEKUSR: {
struct pt_regs *regs;
@@ -156,12 +192,44 @@
if (!cpu_has_fpu)
break;
- flags = read_c0_status();
- __enable_fpu();
- __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
- write_c0_status(flags);
+ preempt_disable();
+ if (cpu_has_mipsmt) {
+ unsigned int vpflags = dvpe();
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+ write_c0_status(flags);
+ evpe(vpflags);
+ } else {
+ flags = read_c0_status();
+ __enable_fpu();
+ __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+ write_c0_status(flags);
+ }
+ preempt_enable();
break;
}
+ case DSP_BASE ... DSP_BASE + 5:
+ if (!cpu_has_dsp) {
+ tmp = 0;
+ ret = -EIO;
+ goto out_tsk;
+ }
+ if (child->thread.dsp.used_dsp) {
+ dspreg_t *dregs = __get_dsp_regs(child);
+ tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+ } else {
+ tmp = -1; /* DSP registers yet used */
+ }
+ break;
+ case DSP_CONTROL:
+ if (!cpu_has_dsp) {
+ tmp = 0;
+ ret = -EIO;
+ goto out_tsk;
+ }
+ tmp = child->thread.dsp.dspcontrol;
+ break;
default:
tmp = 0;
ret = -EIO;
@@ -181,6 +249,31 @@
ret = -EIO;
break;
+ /*
+ * Write 4 bytes into the other process' storage
+ * data is the 4 bytes that the user wants written
+ * addr is a pointer in the user's storage that contains an
+ * 8 byte address in the other process where the 4 bytes
+ * that is to be written
+ * (this is run in a 32-bit process looking at a 64-bit process)
+ * when I and D space are separate, these will need to be fixed.
+ */
+ case PTRACE_POKETEXT_3264:
+ case PTRACE_POKEDATA_3264: {
+ u32 __user * addrOthers;
+
+ /* Get the addr in the other process that we want to write into */
+ ret = -EIO;
+ if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+ break;
+ ret = 0;
+ if (access_process_vm(child, (u64)addrOthers, &data,
+ sizeof(data), 1) == sizeof(data))
+ break;
+ ret = -EIO;
+ break;
+ }
+
case PTRACE_POKEUSR: {
struct pt_regs *regs;
ret = 0;
@@ -231,6 +324,22 @@
else
child->thread.fpu.soft.fcr31 = data;
break;
+ case DSP_BASE ... DSP_BASE + 5:
+ if (!cpu_has_dsp) {
+ ret = -EIO;
+ break;
+ }
+
+ dspreg_t *dregs = __get_dsp_regs(child);
+ dregs[addr - DSP_BASE] = data;
+ break;
+ case DSP_CONTROL:
+ if (!cpu_has_dsp) {
+ ret = -EIO;
+ break;
+ }
+ child->thread.dsp.dspcontrol = data;
+ break;
default:
/* The rest are not allowed. */
ret = -EIO;
@@ -239,6 +348,22 @@
break;
}
+ case PTRACE_GETREGS:
+ ret = ptrace_getregs (child, (__u64 __user *) (__u64) data);
+ break;
+
+ case PTRACE_SETREGS:
+ ret = ptrace_setregs (child, (__u64 __user *) (__u64) data);
+ break;
+
+ case PTRACE_GETFPREGS:
+ ret = ptrace_getfpregs (child, (__u32 __user *) (__u64) data);
+ break;
+
+ case PTRACE_SETFPREGS:
+ ret = ptrace_setfpregs (child, (__u32 __user *) (__u64) data);
+ break;
+
case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
case PTRACE_CONT: { /* restart after signal. */
ret = -EIO;
@@ -269,10 +394,25 @@
wake_up_process(child);
break;
+ case PTRACE_GET_THREAD_AREA:
+ ret = put_user(child->thread_info->tp_value,
+ (unsigned int __user *) (unsigned long) data);
+ break;
+
case PTRACE_DETACH: /* detach a process that was attached. */
ret = ptrace_detach(child, data);
break;
+ case PTRACE_GETEVENTMSG:
+ ret = put_user(child->ptrace_message,
+ (unsigned int __user *) (unsigned long) data);
+ break;
+
+ case PTRACE_GET_THREAD_AREA_3264:
+ ret = put_user(child->thread_info->tp_value,
+ (unsigned long __user *) (unsigned long) data);
+ break;
+
default:
ret = ptrace_request(child, request, addr, data);
break;
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 1a14c6b..283a985 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -32,7 +32,7 @@
.set noreorder
.set mips3
- /* Save floating point context */
+
LEAF(_save_fp_context)
cfc1 t1, fcr31
@@ -74,9 +74,6 @@
EX sdc1 $f28, SC_FPREGS+224(a0)
EX sdc1 $f30, SC_FPREGS+240(a0)
EX sw t1, SC_FPC_CSR(a0)
- cfc1 t0, $0 # implementation/version
- EX sw t0, SC_FPC_EIR(a0)
-
jr ra
li v0, 0 # success
END(_save_fp_context)
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
new file mode 100644
index 0000000..8c81f3c
--- /dev/null
+++ b/arch/mips/kernel/rtlx.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/rtlx.h>
+
+#define RTLX_MAJOR 64
+#define RTLX_TARG_VPE 1
+
+struct rtlx_info *rtlx;
+static int major;
+static char module_name[] = "rtlx";
+static inline int spacefree(int read, int write, int size);
+
+static struct chan_waitqueues {
+ wait_queue_head_t rt_queue;
+ wait_queue_head_t lx_queue;
+} channel_wqs[RTLX_CHANNELS];
+
+static struct irqaction irq;
+static int irq_num;
+
+extern void *vpe_get_shared(int index);
+
+static void rtlx_dispatch(struct pt_regs *regs)
+{
+ do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs);
+}
+
+irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ irqreturn_t r = IRQ_HANDLED;
+ int i;
+
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ struct rtlx_channel *chan = &rtlx->channel[i];
+
+ if (chan->lx_read != chan->lx_write)
+ wake_up_interruptible(&channel_wqs[i].lx_queue);
+ }
+
+ return r;
+}
+
+void dump_rtlx(void)
+{
+ int i;
+
+ printk("id 0x%lx state %d\n", rtlx->id, rtlx->state);
+
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ struct rtlx_channel *chan = &rtlx->channel[i];
+
+ printk(" rt_state %d lx_state %d buffer_size %d\n",
+ chan->rt_state, chan->lx_state, chan->buffer_size);
+
+ printk(" rt_read %d rt_write %d\n",
+ chan->rt_read, chan->rt_write);
+
+ printk(" lx_read %d lx_write %d\n",
+ chan->lx_read, chan->lx_write);
+
+ printk(" rt_buffer <%s>\n", chan->rt_buffer);
+ printk(" lx_buffer <%s>\n", chan->lx_buffer);
+ }
+}
+
+/* call when we have the address of the shared structure from the SP side. */
+static int rtlx_init(struct rtlx_info *rtlxi)
+{
+ int i;
+
+ if (rtlxi->id != RTLX_ID) {
+ printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi);
+ return (-ENOEXEC);
+ }
+
+ /* initialise the wait queues */
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ init_waitqueue_head(&channel_wqs[i].rt_queue);
+ init_waitqueue_head(&channel_wqs[i].lx_queue);
+ }
+
+ /* set up for interrupt handling */
+ memset(&irq, 0, sizeof(struct irqaction));
+
+ if (cpu_has_vint) {
+ set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+ }
+
+ irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
+ irq.handler = rtlx_interrupt;
+ irq.flags = SA_INTERRUPT;
+ irq.name = "RTLX";
+ irq.dev_id = rtlx;
+ setup_irq(irq_num, &irq);
+
+ rtlx = rtlxi;
+ return (0);
+}
+
+/* only allow one open process at a time to open each channel */
+static int rtlx_open(struct inode *inode, struct file *filp)
+{
+ int minor, ret;
+ struct rtlx_channel *chan;
+
+ /* assume only 1 device at the mo. */
+ minor = MINOR(inode->i_rdev);
+
+ if (rtlx == NULL) {
+ struct rtlx_info **p;
+ if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
+ printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n");
+ return (-EFAULT);
+ }
+
+ if (*p == NULL) {
+ printk(" vpe_shared %p %p\n", p, *p);
+ return (-EFAULT);
+ }
+
+ if ((ret = rtlx_init(*p)) < 0)
+ return (ret);
+ }
+
+ chan = &rtlx->channel[minor];
+
+ /* already open? */
+ if (chan->lx_state == RTLX_STATE_OPENED)
+ return (-EBUSY);
+
+ chan->lx_state = RTLX_STATE_OPENED;
+ return (0);
+}
+
+static int rtlx_release(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED;
+ return (0);
+}
+
+static unsigned int rtlx_poll(struct file *file, poll_table * wait)
+{
+ int minor;
+ unsigned int mask = 0;
+ struct rtlx_channel *chan;
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ chan = &rtlx->channel[minor];
+
+ poll_wait(file, &channel_wqs[minor].rt_queue, wait);
+ poll_wait(file, &channel_wqs[minor].lx_queue, wait);
+
+ /* data available to read? */
+ if (chan->lx_read != chan->lx_write)
+ mask |= POLLIN | POLLRDNORM;
+
+ /* space to write */
+ if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size))
+ mask |= POLLOUT | POLLWRNORM;
+
+ return (mask);
+}
+
+static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count,
+ loff_t * ppos)
+{
+ size_t fl = 0L;
+ int minor;
+ struct rtlx_channel *lx;
+ DECLARE_WAITQUEUE(wait, current);
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ lx = &rtlx->channel[minor];
+
+ /* data available? */
+ if (lx->lx_write == lx->lx_read) {
+ if (file->f_flags & O_NONBLOCK)
+ return (0); // -EAGAIN makes cat whinge
+
+ /* go to sleep */
+ add_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ while (lx->lx_write == lx->lx_read)
+ schedule();
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+
+ /* back running */
+ }
+
+ /* find out how much in total */
+ count = min( count,
+ (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size);
+
+ /* then how much from the read pointer onwards */
+ fl = min( count, (size_t)lx->buffer_size - lx->lx_read);
+
+ copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl);
+
+ /* and if there is anything left at the beginning of the buffer */
+ if ( count - fl )
+ copy_to_user (buffer + fl, lx->lx_buffer, count - fl);
+
+ /* update the index */
+ lx->lx_read += count;
+ lx->lx_read %= lx->buffer_size;
+
+ return (count);
+}
+
+static inline int spacefree(int read, int write, int size)
+{
+ if (read == write) {
+ /* never fill the buffer completely, so indexes are always equal if empty
+ and only empty, or !equal if data available */
+ return (size - 1);
+ }
+
+ return ((read + size - write) % size) - 1;
+}
+
+static ssize_t rtlx_write(struct file *file, const char __user * buffer,
+ size_t count, loff_t * ppos)
+{
+ int minor;
+ struct rtlx_channel *rt;
+ size_t fl;
+ DECLARE_WAITQUEUE(wait, current);
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ rt = &rtlx->channel[minor];
+
+ /* any space left... */
+ if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) {
+
+ if (file->f_flags & O_NONBLOCK)
+ return (-EAGAIN);
+
+ add_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size))
+ schedule();
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+ }
+
+ /* total number of bytes to copy */
+ count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) );
+
+ /* first bit from write pointer to the end of the buffer, or count */
+ fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
+
+ copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl);
+
+ /* if there's any left copy to the beginning of the buffer */
+ if( count - fl )
+ copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
+
+ rt->rt_write += count;
+ rt->rt_write %= rt->buffer_size;
+
+ return(count);
+}
+
+static struct file_operations rtlx_fops = {
+ .owner = THIS_MODULE,
+ .open = rtlx_open,
+ .release = rtlx_release,
+ .write = rtlx_write,
+ .read = rtlx_read,
+ .poll = rtlx_poll
+};
+
+static int rtlx_module_init(void)
+{
+ if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) {
+ printk("rtlx_module_init: unable to register device\n");
+ return (-EBUSY);
+ }
+
+ if (major == 0)
+ major = RTLX_MAJOR;
+
+ return (0);
+}
+
+static void rtlx_module_exit(void)
+{
+ unregister_chrdev(major, module_name);
+}
+
+module_init(rtlx_module_init);
+module_exit(rtlx_module_exit);
+MODULE_DESCRIPTION("MIPS RTLX");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 17b5030..4dd8e8b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -578,7 +578,7 @@
sys sys_fremovexattr 2 /* 4235 */
sys sys_tkill 2
sys sys_sendfile64 5
- sys sys_futex 2
+ sys sys_futex 6
sys sys_sched_setaffinity 3
sys sys_sched_getaffinity 3 /* 4240 */
sys sys_io_setup 2
@@ -587,7 +587,7 @@
sys sys_io_submit 3
sys sys_io_cancel 3 /* 4245 */
sys sys_exit_group 1
- sys sys_lookup_dcookie 3
+ sys sys_lookup_dcookie 4
sys sys_epoll_create 1
sys sys_epoll_ctl 4
sys sys_epoll_wait 3 /* 4250 */
@@ -618,12 +618,15 @@
sys sys_mq_notify 2 /* 4275 */
sys sys_mq_getsetattr 3
sys sys_ni_syscall 0 /* sys_vserver */
- sys sys_waitid 4
+ sys sys_waitid 5
sys sys_ni_syscall 0 /* available, was setaltroot */
- sys sys_add_key 5
+ sys sys_add_key 5 /* 4280 */
sys sys_request_key 4
sys sys_keyctl 5
-
+ sys sys_set_thread_area 1
+ sys sys_inotify_init 0
+ sys sys_inotify_add_watch 3 /* 4285 */
+ sys sys_inotify_rm_watch 2
.endm
/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index ffb22a2..9085838 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -449,3 +449,7 @@
PTR sys_add_key
PTR sys_request_key /* 5240 */
PTR sys_keyctl
+ PTR sys_set_thread_area
+ PTR sys_inotify_init
+ PTR sys_inotify_add_watch
+ PTR sys_inotify_rm_watch /* 5245 */
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e52049c..7e66eb8 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -176,7 +176,7 @@
PTR sys_fork
PTR sys32_execve
PTR sys_exit
- PTR sys32_wait4
+ PTR compat_sys_wait4
PTR sys_kill /* 6060 */
PTR sys32_newuname
PTR sys_semget
@@ -216,7 +216,7 @@
PTR compat_sys_getrusage
PTR sys32_sysinfo
PTR compat_sys_times
- PTR sys_ptrace
+ PTR sys32_ptrace
PTR sys_getuid /* 6100 */
PTR sys_syslog
PTR sys_getgid
@@ -243,14 +243,14 @@
PTR sys_capget
PTR sys_capset
PTR sys32_rt_sigpending /* 6125 */
- PTR compat_sys_rt_sigtimedwait
- PTR sys32_rt_sigqueueinfo
+ PTR sysn32_rt_sigtimedwait
+ PTR sys_rt_sigqueueinfo
PTR sys32_rt_sigsuspend
PTR sys32_sigaltstack
PTR compat_sys_utime /* 6130 */
PTR sys_mknod
PTR sys32_personality
- PTR sys_ustat
+ PTR sys32_ustat
PTR compat_sys_statfs
PTR compat_sys_fstatfs /* 6135 */
PTR sys_sysfs
@@ -329,7 +329,7 @@
PTR sys_epoll_wait
PTR sys_remap_file_pages /* 6210 */
PTR sysn32_rt_sigreturn
- PTR sys_fcntl
+ PTR compat_sys_fcntl64
PTR sys_set_tid_address
PTR sys_restart_syscall
PTR sys_semtimedop /* 6215 */
@@ -337,15 +337,15 @@
PTR compat_sys_statfs64
PTR compat_sys_fstatfs64
PTR sys_sendfile64
- PTR sys_timer_create /* 6220 */
- PTR sys_timer_settime
- PTR sys_timer_gettime
+ PTR sys32_timer_create /* 6220 */
+ PTR compat_sys_timer_settime
+ PTR compat_sys_timer_gettime
PTR sys_timer_getoverrun
PTR sys_timer_delete
- PTR sys_clock_settime /* 6225 */
- PTR sys_clock_gettime
- PTR sys_clock_getres
- PTR sys_clock_nanosleep
+ PTR compat_sys_clock_settime /* 6225 */
+ PTR compat_sys_clock_gettime
+ PTR compat_sys_clock_getres
+ PTR compat_sys_clock_nanosleep
PTR sys_tgkill
PTR compat_sys_utimes /* 6230 */
PTR sys_ni_syscall /* sys_mbind */
@@ -358,8 +358,12 @@
PTR compat_sys_mq_notify
PTR compat_sys_mq_getsetattr
PTR sys_ni_syscall /* 6240, sys_vserver */
- PTR sys_waitid
+ PTR sysn32_waitid
PTR sys_ni_syscall /* available, was setaltroot */
PTR sys_add_key
PTR sys_request_key
PTR sys_keyctl /* 6245 */
+ PTR sys_set_thread_area
+ PTR sys_inotify_init
+ PTR sys_inotify_add_watch
+ PTR sys_inotify_rm_watch
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 739f399..5a16401 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -316,13 +316,13 @@
PTR sys_vhangup
PTR sys_ni_syscall /* was sys_idle */
PTR sys_ni_syscall /* sys_vm86 */
- PTR sys32_wait4
+ PTR compat_sys_wait4
PTR sys_swapoff /* 4115 */
PTR sys32_sysinfo
PTR sys32_ipc
PTR sys_fsync
PTR sys32_sigreturn
- PTR sys_clone /* 4120 */
+ PTR sys32_clone /* 4120 */
PTR sys_setdomainname
PTR sys32_newuname
PTR sys_ni_syscall /* sys_modify_ldt */
@@ -391,7 +391,7 @@
PTR sys_getresuid
PTR sys_ni_syscall /* was query_module */
PTR sys_poll
- PTR sys_nfsservctl
+ PTR compat_sys_nfsservctl
PTR sys_setresgid /* 4190 */
PTR sys_getresgid
PTR sys_prctl
@@ -459,7 +459,7 @@
PTR sys_fadvise64_64
PTR compat_sys_statfs64 /* 4255 */
PTR compat_sys_fstatfs64
- PTR sys_timer_create
+ PTR sys32_timer_create
PTR compat_sys_timer_settime
PTR compat_sys_timer_gettime
PTR sys_timer_getoverrun /* 4260 */
@@ -480,9 +480,13 @@
PTR compat_sys_mq_notify /* 4275 */
PTR compat_sys_mq_getsetattr
PTR sys_ni_syscall /* sys_vserver */
- PTR sys_waitid
+ PTR sys32_waitid
PTR sys_ni_syscall /* available, was setaltroot */
PTR sys_add_key /* 4280 */
PTR sys_request_key
PTR sys_keyctl
+ PTR sys_set_thread_area
+ PTR sys_inotify_init
+ PTR sys_inotify_add_watch /* 4285 */
+ PTR sys_inotify_rm_watch
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/semaphore.c b/arch/mips/kernel/semaphore.c
index 9c40fe5..1265358 100644
--- a/arch/mips/kernel/semaphore.c
+++ b/arch/mips/kernel/semaphore.c
@@ -42,24 +42,28 @@
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
- "1: ll %0, %2 \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 # __sem_update_count \n"
" sra %1, %0, 31 \n"
" not %1 \n"
" and %1, %0, %1 \n"
- " add %1, %1, %3 \n"
+ " addu %1, %1, %3 \n"
" sc %1, %2 \n"
" beqzl %1, 1b \n"
+ " .set mips0 \n"
: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
: "r" (incr), "m" (sem->count));
} else if (cpu_has_llsc) {
__asm__ __volatile__(
- "1: ll %0, %2 \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 # __sem_update_count \n"
" sra %1, %0, 31 \n"
" not %1 \n"
" and %1, %0, %1 \n"
- " add %1, %1, %3 \n"
+ " addu %1, %1, %3 \n"
" sc %1, %2 \n"
" beqz %1, 1b \n"
+ " .set mips0 \n"
: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
: "r" (incr), "m" (sem->count));
} else {
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 12b531c..d86affa 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -37,12 +37,13 @@
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
+#include <asm/cache.h>
#include <asm/cpu.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/system.h>
-struct cpuinfo_mips cpu_data[NR_CPUS];
+struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(cpu_data);
@@ -62,8 +63,8 @@
*
* These are initialized so they are in the .data section
*/
-unsigned long mips_machtype = MACH_UNKNOWN;
-unsigned long mips_machgroup = MACH_GROUP_UNKNOWN;
+unsigned long mips_machtype __read_mostly = MACH_UNKNOWN;
+unsigned long mips_machgroup __read_mostly = MACH_GROUP_UNKNOWN;
EXPORT_SYMBOL(mips_machtype);
EXPORT_SYMBOL(mips_machgroup);
@@ -77,7 +78,7 @@
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
*/
-const unsigned long mips_io_port_base = -1;
+const unsigned long mips_io_port_base __read_mostly = -1;
EXPORT_SYMBOL(mips_io_port_base);
/*
@@ -510,31 +511,7 @@
#undef MAXMEM
#undef MAXMEM_PFN
-static int __initdata earlyinit_debug;
-
-static int __init earlyinit_debug_setup(char *str)
-{
- earlyinit_debug = 1;
- return 1;
-}
-__setup("earlyinit_debug", earlyinit_debug_setup);
-
-extern initcall_t __earlyinitcall_start, __earlyinitcall_end;
-
-static void __init do_earlyinitcalls(void)
-{
- initcall_t *call, *start, *end;
-
- start = &__earlyinitcall_start;
- end = &__earlyinitcall_end;
-
- for (call = start; call < end; call++) {
- if (earlyinit_debug)
- printk("calling earlyinitcall 0x%p\n", *call);
-
- (*call)();
- }
-}
+extern void plat_setup(void);
void __init setup_arch(char **cmdline_p)
{
@@ -551,7 +528,7 @@
#endif
/* call board setup routine */
- do_earlyinitcalls();
+ plat_setup();
strlcpy(command_line, arcs_cmdline, sizeof(command_line));
strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
@@ -573,3 +550,12 @@
}
__setup("nofpu", fpu_disable);
+
+int __init dsp_disable(char *s)
+{
+ cpu_data[0].ases &= ~MIPS_ASE_DSP;
+
+ return 1;
+}
+
+__setup("nodsp", dsp_disable);
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index f9234df..0f66ae58 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -8,13 +8,14 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
+#include <linux/config.h>
+
static inline int
setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
{
int err = 0;
err |= __put_user(regs->cp0_epc, &sc->sc_pc);
- err |= __put_user(regs->cp0_status, &sc->sc_status);
#define save_gp_reg(i) do { \
err |= __put_user(regs->regs[i], &sc->sc_regs[i]); \
@@ -30,10 +31,32 @@
save_gp_reg(31);
#undef save_gp_reg
+#ifdef CONFIG_32BIT
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
- err |= __put_user(regs->cp0_cause, &sc->sc_cause);
- err |= __put_user(regs->cp0_badvaddr, &sc->sc_badvaddr);
+ if (cpu_has_dsp) {
+ err |= __put_user(mfhi1(), &sc->sc_hi1);
+ err |= __put_user(mflo1(), &sc->sc_lo1);
+ err |= __put_user(mfhi2(), &sc->sc_hi2);
+ err |= __put_user(mflo2(), &sc->sc_lo2);
+ err |= __put_user(mfhi3(), &sc->sc_hi3);
+ err |= __put_user(mflo3(), &sc->sc_lo3);
+ err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+ }
+#endif
+#ifdef CONFIG_64BIT
+ err |= __put_user(regs->hi, &sc->sc_hi[0]);
+ err |= __put_user(regs->lo, &sc->sc_lo[0]);
+ if (cpu_has_dsp) {
+ err |= __put_user(mfhi1(), &sc->sc_hi[1]);
+ err |= __put_user(mflo1(), &sc->sc_lo[1]);
+ err |= __put_user(mfhi2(), &sc->sc_hi[2]);
+ err |= __put_user(mflo2(), &sc->sc_lo[2]);
+ err |= __put_user(mfhi3(), &sc->sc_hi[3]);
+ err |= __put_user(mflo3(), &sc->sc_lo[3]);
+ err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+ }
+#endif
err |= __put_user(!!used_math(), &sc->sc_used_math);
@@ -61,15 +84,40 @@
static inline int
restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
{
- int err = 0;
unsigned int used_math;
+ unsigned long treg;
+ int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+#ifdef CONFIG_32BIT
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
+ if (cpu_has_dsp) {
+ err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+ err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+ err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+ err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+ err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+ err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+ err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+ }
+#endif
+#ifdef CONFIG_64BIT
+ err |= __get_user(regs->hi, &sc->sc_hi[0]);
+ err |= __get_user(regs->lo, &sc->sc_lo[0]);
+ if (cpu_has_dsp) {
+ err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
+ err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
+ err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
+ err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
+ err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
+ err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
+ err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+ }
+#endif
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \
@@ -112,7 +160,7 @@
static inline void *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
- unsigned long sp, almask;
+ unsigned long sp;
/* Default to using normal stack */
sp = regs->regs[29];
@@ -128,10 +176,32 @@
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
sp = current->sas_ss_sp + current->sas_ss_size;
- if (PLAT_TRAMPOLINE_STUFF_LINE)
- almask = ~(PLAT_TRAMPOLINE_STUFF_LINE - 1);
- else
- almask = ALMASK;
+ return (void *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
+}
- return (void *)((sp - frame_size) & almask);
+static inline int install_sigtramp(unsigned int __user *tramp,
+ unsigned int syscall)
+{
+ int err;
+
+ /*
+ * Set up the return code ...
+ *
+ * li v0, __NR__foo_sigreturn
+ * syscall
+ */
+
+ err = __put_user(0x24020000 + syscall, tramp + 0);
+ err |= __put_user(0x0000000c , tramp + 1);
+ if (ICACHE_REFILLS_WORKAROUND_WAR) {
+ err |= __put_user(0, tramp + 2);
+ err |= __put_user(0, tramp + 3);
+ err |= __put_user(0, tramp + 4);
+ err |= __put_user(0, tramp + 5);
+ err |= __put_user(0, tramp + 6);
+ err |= __put_user(0, tramp + 7);
+ }
+ flush_cache_sigtramp((unsigned long) tramp);
+
+ return err;
}
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 0209c1d..9202a17 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -8,6 +8,7 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/config.h>
+#include <linux/cache.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/personality.h>
@@ -21,6 +22,7 @@
#include <linux/unistd.h>
#include <linux/compiler.h>
+#include <asm/abi.h>
#include <asm/asm.h>
#include <linux/bitops.h>
#include <asm/cacheflush.h>
@@ -29,6 +31,7 @@
#include <asm/uaccess.h>
#include <asm/ucontext.h>
#include <asm/cpu-features.h>
+#include <asm/war.h>
#include "signal-common.h"
@@ -36,7 +39,7 @@
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-static int do_signal(sigset_t *oldset, struct pt_regs *regs);
+int do_signal(sigset_t *oldset, struct pt_regs *regs);
/*
* Atomically swap in the new signal mask, and wait for a signal.
@@ -47,9 +50,10 @@
__attribute_used__ noinline static int
_sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- sigset_t *uset, saveset, newset;
+ sigset_t saveset, newset;
+ sigset_t __user *uset;
- uset = (sigset_t *) regs.regs[4];
+ uset = (sigset_t __user *) regs.regs[4];
if (copy_from_user(&newset, uset, sizeof(sigset_t)))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -75,7 +79,8 @@
__attribute_used__ noinline static int
_sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- sigset_t *unewset, saveset, newset;
+ sigset_t saveset, newset;
+ sigset_t __user *unewset;
size_t sigsetsize;
/* XXX Don't preclude handling different sized sigset_t's. */
@@ -83,7 +88,7 @@
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
- unewset = (sigset_t *) regs.regs[4];
+ unewset = (sigset_t __user *) regs.regs[4];
if (copy_from_user(&newset, unewset, sizeof(newset)))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -147,33 +152,46 @@
asmlinkage int sys_sigaltstack(nabi_no_regargs struct pt_regs regs)
{
- const stack_t *uss = (const stack_t *) regs.regs[4];
- stack_t *uoss = (stack_t *) regs.regs[5];
+ const stack_t __user *uss = (const stack_t __user *) regs.regs[4];
+ stack_t __user *uoss = (stack_t __user *) regs.regs[5];
unsigned long usp = regs.regs[29];
return do_sigaltstack(uss, uoss, usp);
}
-#if PLAT_TRAMPOLINE_STUFF_LINE
-#define __tramp __attribute__((aligned(PLAT_TRAMPOLINE_STUFF_LINE)))
-#else
-#define __tramp
-#endif
-
+/*
+ * Horribly complicated - with the bloody RM9000 workarounds enabled
+ * the signal trampolines is moving to the end of the structure so we can
+ * increase the alignment without breaking software compatibility.
+ */
#ifdef CONFIG_TRAD_SIGNALS
struct sigframe {
u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_code[2] __tramp; /* signal trampoline */
- struct sigcontext sf_sc __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 sf_pad[2];
+#else
+ u32 sf_code[2]; /* signal trampoline */
+#endif
+ struct sigcontext sf_sc;
sigset_t sf_mask;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */
+#endif
};
#endif
struct rt_sigframe {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2] __tramp; /* signal trampoline */
- struct siginfo rs_info __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_pad[2];
+#else
+ u32 rs_code[2]; /* signal trampoline */
+#endif
+ struct siginfo rs_info;
struct ucontext rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */
+#endif
};
#ifdef CONFIG_TRAD_SIGNALS
@@ -214,7 +232,7 @@
badframe:
force_sig(SIGSEGV, current);
}
-#endif
+#endif /* CONFIG_TRAD_SIGNALS */
save_static_function(sys_rt_sigreturn);
__attribute_used__ noinline static void
@@ -260,7 +278,7 @@
}
#ifdef CONFIG_TRAD_SIGNALS
-static void inline setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set)
{
struct sigframe *frame;
@@ -270,17 +288,7 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- /*
- * Set up the return code ...
- *
- * li v0, __NR_sigreturn
- * syscall
- */
- if (PLAT_TRAMPOLINE_STUFF_LINE)
- __clear_user(frame->sf_code, PLAT_TRAMPOLINE_STUFF_LINE);
- err |= __put_user(0x24020000 + __NR_sigreturn, frame->sf_code + 0);
- err |= __put_user(0x0000000c , frame->sf_code + 1);
- flush_cache_sigtramp((unsigned long) frame->sf_code);
+ install_sigtramp(frame->sf_code, __NR_sigreturn);
err |= setup_sigcontext(regs, &frame->sf_sc);
err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
@@ -309,14 +317,15 @@
current->comm, current->pid,
frame, regs->cp0_epc, frame->regs[31]);
#endif
- return;
+ return 1;
give_sigsegv:
force_sigsegv(signr, current);
+ return 0;
}
#endif
-static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe *frame;
@@ -326,17 +335,7 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- /*
- * Set up the return code ...
- *
- * li v0, __NR_rt_sigreturn
- * syscall
- */
- if (PLAT_TRAMPOLINE_STUFF_LINE)
- __clear_user(frame->rs_code, PLAT_TRAMPOLINE_STUFF_LINE);
- err |= __put_user(0x24020000 + __NR_rt_sigreturn, frame->rs_code + 0);
- err |= __put_user(0x0000000c , frame->rs_code + 1);
- flush_cache_sigtramp((unsigned long) frame->rs_code);
+ install_sigtramp(frame->rs_code, __NR_rt_sigreturn);
/* Create siginfo. */
err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -378,18 +377,21 @@
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
- return;
+ return 1;
give_sigsegv:
force_sigsegv(signr, current);
+ return 0;
}
extern void setup_rt_frame_n32(struct k_sigaction * ka,
struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info);
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
{
+ int ret;
+
switch(regs->regs[0]) {
case ERESTART_RESTARTBLOCK:
case ERESTARTNOHAND:
@@ -408,22 +410,10 @@
regs->regs[0] = 0; /* Don't deal with this again. */
-#ifdef CONFIG_TRAD_SIGNALS
- if (ka->sa.sa_flags & SA_SIGINFO) {
-#else
- if (1) {
-#endif
-#ifdef CONFIG_MIPS32_N32
- if ((current->thread.mflags & MF_ABI_MASK) == MF_N32)
- setup_rt_frame_n32 (ka, regs, sig, oldset, info);
- else
-#endif
- setup_rt_frame(ka, regs, sig, oldset, info);
- }
-#ifdef CONFIG_TRAD_SIGNALS
+ if (sig_uses_siginfo(ka))
+ ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
else
- setup_frame(ka, regs, sig, oldset);
-#endif
+ ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
@@ -431,23 +421,16 @@
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ return ret;
}
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
-extern int do_irix_signal(sigset_t *oldset, struct pt_regs *regs);
-
-static int do_signal(sigset_t *oldset, struct pt_regs *regs)
+int do_signal(sigset_t *oldset, struct pt_regs *regs)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
-#ifdef CONFIG_BINFMT_ELF32
- if ((current->thread.mflags & MF_ABI_MASK) == MF_O32) {
- return do_signal32(oldset, regs);
- }
-#endif
-
/*
* We want the common case to go fast, which is why we may in certain
* cases get here from kernel mode. Just return without doing anything
@@ -463,10 +446,8 @@
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- handle_signal(signr, &info, &ka, oldset, regs);
- return 1;
- }
+ if (signr > 0)
+ return handle_signal(signr, &info, &ka, oldset, regs);
no_signal:
/*
@@ -499,18 +480,6 @@
{
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING) {
-#ifdef CONFIG_BINFMT_ELF32
- if (likely((current->thread.mflags & MF_ABI_MASK) == MF_O32)) {
- do_signal32(oldset, regs);
- return;
- }
-#endif
-#ifdef CONFIG_BINFMT_IRIX
- if (unlikely(current->personality != PER_LINUX)) {
- do_irix_signal(oldset, regs);
- return;
- }
-#endif
- do_signal(oldset, regs);
+ current->thread.abi->do_signal(oldset, regs);
}
}
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 8ddfbd8..dbe8213 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -7,6 +7,7 @@
* Copyright (C) 1994 - 2000 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
+#include <linux/cache.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
@@ -21,6 +22,7 @@
#include <linux/suspend.h>
#include <linux/compiler.h>
+#include <asm/abi.h>
#include <asm/asm.h>
#include <linux/bitops.h>
#include <asm/cacheflush.h>
@@ -29,6 +31,7 @@
#include <asm/ucontext.h>
#include <asm/system.h>
#include <asm/fpu.h>
+#include <asm/war.h>
#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3)
@@ -76,8 +79,10 @@
/* POSIX.1b timers */
struct {
- unsigned int _timer1;
- unsigned int _timer2;
+ timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ compat_sigval_t _sigval;/* same as below */
+ int _sys_private; /* not to be passed to user */
} _timer;
/* POSIX.1b signals */
@@ -259,11 +264,12 @@
if (act) {
old_sigset_t mask;
+ s32 handler;
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
- err |= __get_user((u32)(u64)new_ka.sa.sa_handler,
- &act->sa_handler);
+ err |= __get_user(handler, &act->sa_handler);
+ new_ka.sa.sa_handler = (void*)(s64)handler;
err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
err |= __get_user(mask, &act->sa_mask.sig[0]);
if (err)
@@ -331,8 +337,9 @@
static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
{
+ u32 used_math;
int err = 0;
- __u32 used_math;
+ s32 treg;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
@@ -340,6 +347,15 @@
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
+ if (cpu_has_dsp) {
+ err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+ err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+ err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+ err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+ err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+ err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+ err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+ }
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \
@@ -378,16 +394,30 @@
struct sigframe {
u32 sf_ass[4]; /* argument save space for o32 */
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 sf_pad[2];
+#else
u32 sf_code[2]; /* signal trampoline */
+#endif
struct sigcontext32 sf_sc;
sigset_t sf_mask;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */
+#endif
};
struct rt_sigframe32 {
u32 rs_ass[4]; /* argument save space for o32 */
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_pad[2];
+#else
u32 rs_code[2]; /* signal trampoline */
+#endif
compat_siginfo_t rs_info;
struct ucontext32 rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_code[8] __attribute__((aligned(32))); /* signal trampoline */
+#endif
};
int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from)
@@ -411,6 +441,11 @@
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
switch (from->si_code >> 16) {
+ case __SI_TIMER >> 16:
+ err |= __put_user(from->si_tid, &to->si_tid);
+ err |= __put_user(from->si_overrun, &to->si_overrun);
+ err |= __put_user(from->si_int, &to->si_int);
+ break;
case __SI_CHLD >> 16:
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
@@ -480,6 +515,7 @@
_sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
struct rt_sigframe32 *frame;
+ mm_segment_t old_fs;
sigset_t set;
stack_t st;
s32 sp;
@@ -510,7 +546,10 @@
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
+ old_fs = get_fs();
+ set_fs (KERNEL_DS);
do_sigaltstack(&st, NULL, regs.regs[29]);
+ set_fs (old_fs);
/*
* Don't let your children do this ...
@@ -550,8 +589,15 @@
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
- err |= __put_user(regs->cp0_cause, &sc->sc_cause);
- err |= __put_user(regs->cp0_badvaddr, &sc->sc_badvaddr);
+ if (cpu_has_dsp) {
+ err |= __put_user(rddsp(DSP_MASK), &sc->sc_hi1);
+ err |= __put_user(mfhi1(), &sc->sc_hi1);
+ err |= __put_user(mflo1(), &sc->sc_lo1);
+ err |= __put_user(mfhi2(), &sc->sc_hi2);
+ err |= __put_user(mflo2(), &sc->sc_lo2);
+ err |= __put_user(mfhi3(), &sc->sc_hi3);
+ err |= __put_user(mflo3(), &sc->sc_lo3);
+ }
err |= __put_user(!!used_math(), &sc->sc_used_math);
@@ -601,7 +647,7 @@
return (void *)((sp - frame_size) & ALMASK);
}
-static inline void setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
int signr, sigset_t *set)
{
struct sigframe *frame;
@@ -654,9 +700,7 @@
force_sigsegv(signr, current);
}
-static inline void setup_rt_frame(struct k_sigaction * ka,
- struct pt_regs *regs, int signr,
- sigset_t *set, siginfo_t *info)
+void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe32 *frame;
int err = 0;
@@ -725,9 +769,11 @@
force_sigsegv(signr, current);
}
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
{
+ int ret;
+
switch (regs->regs[0]) {
case ERESTART_RESTARTBLOCK:
case ERESTARTNOHAND:
@@ -747,9 +793,9 @@
regs->regs[0] = 0; /* Don't deal with this again. */
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame(ka, regs, sig, oldset, info);
+ ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
else
- setup_frame(ka, regs, sig, oldset);
+ ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
@@ -757,6 +803,8 @@
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ return ret;
}
int do_signal32(sigset_t *oldset, struct pt_regs *regs)
@@ -780,10 +828,8 @@
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- handle_signal(signr, &info, &ka, oldset, regs);
- return 1;
- }
+ if (signr > 0)
+ return handle_signal(signr, &info, &ka, oldset, regs);
no_signal:
/*
@@ -819,12 +865,13 @@
goto out;
if (act) {
+ s32 handler;
int err = 0;
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
- err |= __get_user((u32)(u64)new_sa.sa.sa_handler,
- &act->sa_handler);
+ err |= __get_user(handler, &act->sa_handler);
+ new_sa.sa.sa_handler = (void*)(s64)handler;
err |= __get_user(new_sa.sa.sa_flags, &act->sa_flags);
err |= get_sigset(&new_sa.sa.sa_mask, &act->sa_mask);
if (err)
@@ -902,3 +949,30 @@
set_fs (old_fs);
return ret;
}
+
+asmlinkage long
+sys32_waitid(int which, compat_pid_t pid,
+ compat_siginfo_t __user *uinfo, int options,
+ struct compat_rusage __user *uru)
+{
+ siginfo_t info;
+ struct rusage ru;
+ long ret;
+ mm_segment_t old_fs = get_fs();
+
+ info.si_signo = 0;
+ set_fs (KERNEL_DS);
+ ret = sys_waitid(which, pid, (siginfo_t __user *) &info, options,
+ uru ? (struct rusage __user *) &ru : NULL);
+ set_fs (old_fs);
+
+ if (ret < 0 || info.si_signo == 0)
+ return ret;
+
+ if (uru && (ret = put_compat_rusage(&ru, uru)))
+ return ret;
+
+ BUG_ON(info.si_code & __SI_MASK);
+ info.si_code |= __SI_CHLD;
+ return copy_siginfo_to_user32(uinfo, &info);
+}
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 3544208..ec61b26 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -15,6 +15,8 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/cache.h>
+#include <linux/sched.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
@@ -36,6 +38,7 @@
#include <asm/system.h>
#include <asm/fpu.h>
#include <asm/cpu-features.h>
+#include <asm/war.h>
#include "signal-common.h"
@@ -62,17 +65,18 @@
sigset_t uc_sigmask; /* mask last for extensibility */
};
-#if PLAT_TRAMPOLINE_STUFF_LINE
-#define __tramp __attribute__((aligned(PLAT_TRAMPOLINE_STUFF_LINE)))
-#else
-#define __tramp
-#endif
-
struct rt_sigframe_n32 {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2] __tramp; /* signal trampoline */
- struct siginfo rs_info __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_pad[2];
+#else
+ u32 rs_code[2]; /* signal trampoline */
+#endif
+ struct siginfo rs_info;
struct ucontextn32 rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+ u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */
+#endif
};
save_static_function(sysn32_rt_sigreturn);
@@ -126,7 +130,7 @@
force_sig(SIGSEGV, current);
}
-void setup_rt_frame_n32(struct k_sigaction * ka,
+int setup_rt_frame_n32(struct k_sigaction * ka,
struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe_n32 *frame;
@@ -137,17 +141,7 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- /*
- * Set up the return code ...
- *
- * li v0, __NR_rt_sigreturn
- * syscall
- */
- if (PLAT_TRAMPOLINE_STUFF_LINE)
- __clear_user(frame->rs_code, PLAT_TRAMPOLINE_STUFF_LINE);
- err |= __put_user(0x24020000 + __NR_N32_rt_sigreturn, frame->rs_code + 0);
- err |= __put_user(0x0000000c , frame->rs_code + 1);
- flush_cache_sigtramp((unsigned long) frame->rs_code);
+ install_sigtramp(frame->rs_code, __NR_N32_rt_sigreturn);
/* Create siginfo. */
err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -190,8 +184,9 @@
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
#endif
- return;
+ return 1;
give_sigsegv:
force_sigsegv(signr, current);
+ return 0;
}
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index af5cd3b..fcacf1a 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -50,7 +50,6 @@
{
struct cache_desc *cd = ¤t_cpu_data.scache;
unsigned long cachesize; /* kB */
- unsigned long bandwidth = 350; /* MB/s */
unsigned long cpu_khz;
/*
@@ -121,7 +120,19 @@
* or are or have executed.
*
* You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
+ * hardware interrupt handler or from a bottom half handler:
+ *
+ * CPU A CPU B
+ * Disable interrupts
+ * smp_call_function()
+ * Take call_lock
+ * Send IPIs
+ * Wait for all cpus to acknowledge IPI
+ * CPU A has not responded, spin waiting
+ * for cpu A to respond, holding call_lock
+ * smp_call_function()
+ * Spin waiting for call_lock
+ * Deadlock Deadlock
*/
int smp_call_function (void (*func) (void *info), void *info, int retry,
int wait)
@@ -130,6 +141,11 @@
int i, cpus = num_online_cpus() - 1;
int cpu = smp_processor_id();
+ /*
+ * Can die spectacularly if this CPU isn't yet marked online
+ */
+ BUG_ON(!cpu_online(cpu));
+
if (!cpus)
return 0;
@@ -214,7 +230,6 @@
/* called from main before smp_init() */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
- cpu_data[0].udelay_val = loops_per_jiffy;
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
smp_tune_scheduling();
@@ -236,44 +251,32 @@
}
/*
- * Startup the CPU with this logical number
- */
-static int __init do_boot_cpu(int cpu)
-{
- struct task_struct *idle;
-
- /*
- * The following code is purely to make sure
- * Linux can schedule processes on this slave.
- */
- idle = fork_idle(cpu);
- if (IS_ERR(idle))
- panic("failed fork for CPU %d\n", cpu);
-
- prom_boot_secondary(cpu, idle);
-
- /* XXXKW timeout */
- while (!cpu_isset(cpu, cpu_callin_map))
- udelay(100);
-
- cpu_set(cpu, cpu_online_map);
-
- return 0;
-}
-
-/*
* Called once for each "cpu_possible(cpu)". Needs to spin up the cpu
* and keep control until "cpu_online(cpu)" is set. Note: cpu is
* physical, not logical.
*/
int __devinit __cpu_up(unsigned int cpu)
{
- int ret;
+ struct task_struct *idle;
- /* Processor goes to start_secondary(), sets online flag */
- ret = do_boot_cpu(cpu);
- if (ret < 0)
- return ret;
+ /*
+ * Processor goes to start_secondary(), sets online flag
+ * The following code is purely to make sure
+ * Linux can schedule processes on this slave.
+ */
+ idle = fork_idle(cpu);
+ if (IS_ERR(idle))
+ panic(KERN_ERR "Fork failed for CPU %d", cpu);
+
+ prom_boot_secondary(cpu, idle);
+
+ /*
+ * Trust is futile. We should really have timeouts ...
+ */
+ while (!cpu_isset(cpu, cpu_callin_map))
+ udelay(100);
+
+ cpu_set(cpu, cpu_online_map);
return 0;
}
diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c
new file mode 100644
index 0000000..d429544
--- /dev/null
+++ b/arch/mips/kernel/smp_mt.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * Elizabeth Clarke (beth@mips.com)
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/mips-boards/maltaint.h>
+
+#define MIPS_CPU_IPI_RESCHED_IRQ 0
+#define MIPS_CPU_IPI_CALL_IRQ 1
+
+static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
+
+#if 0
+static void dump_mtregisters(int vpe, int tc)
+{
+ printk("vpe %d tc %d\n", vpe, tc);
+
+ settc(tc);
+
+ printk(" c0 status 0x%lx\n", read_vpe_c0_status());
+ printk(" vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol());
+ printk(" vpeconf0 0x%lx\n", read_vpe_c0_vpeconf0());
+ printk(" tcstatus 0x%lx\n", read_tc_c0_tcstatus());
+ printk(" tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+ printk(" tcbind 0x%lx\n", read_tc_c0_tcbind());
+ printk(" tchalt 0x%lx\n", read_tc_c0_tchalt());
+}
+#endif
+
+void __init sanitize_tlb_entries(void)
+{
+ int i, tlbsiz;
+ unsigned long mvpconf0, ncpu;
+
+ if (!cpu_has_mipsmt)
+ return;
+
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* Disable TLB sharing */
+ clear_c0_mvpcontrol(MVPCONTROL_STLB);
+
+ mvpconf0 = read_c0_mvpconf0();
+
+ printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0,
+ (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT,
+ (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT);
+
+ tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT;
+ ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+
+ printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu);
+
+ if (tlbsiz > 0) {
+ /* share them out across the vpe's */
+ tlbsiz /= ncpu;
+
+ printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz);
+
+ for (i = 0; i < ncpu; i++) {
+ settc(i);
+
+ if (i == 0)
+ write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25));
+ else
+ write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) |
+ (tlbsiz << 25));
+ }
+ }
+
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+}
+
+#if 0
+/*
+ * Use c0_MVPConf0 to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ */
+void __init prom_build_cpu_map(void)
+{
+ int i, num, ncpus;
+
+ cpus_clear(phys_cpu_present_map);
+
+ /* assume we boot on cpu 0.... */
+ cpu_set(0, phys_cpu_present_map);
+ __cpu_number_map[0] = 0;
+ __cpu_logical_map[0] = 0;
+
+ if (cpu_has_mipsmt) {
+ ncpus = ((read_c0_mvpconf0() & (MVPCONF0_PVPE)) >> MVPCONF0_PVPE_SHIFT) + 1;
+ for (i=1, num=0; i< NR_CPUS && i<ncpus; i++) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
+ }
+
+ printk(KERN_INFO "%i available secondary CPU(s)\n", num);
+ }
+}
+#endif
+
+static void ipi_resched_dispatch (struct pt_regs *regs)
+{
+ do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
+}
+
+static void ipi_call_dispatch (struct pt_regs *regs)
+{
+ do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs);
+}
+
+irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ return IRQ_HANDLED;
+}
+
+irqreturn_t ipi_call_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ smp_call_function_interrupt();
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+ .handler = ipi_resched_interrupt,
+ .flags = SA_INTERRUPT,
+ .name = "IPI_resched"
+};
+
+static struct irqaction irq_call = {
+ .handler = ipi_call_interrupt,
+ .flags = SA_INTERRUPT,
+ .name = "IPI_call"
+};
+
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondarys
+ */
+void prom_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned long val;
+ int i, num;
+
+ if (!cpu_has_mipsmt)
+ return;
+
+ /* disable MT so we can configure */
+ dvpe();
+ dmt();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ val = read_c0_mvpconf0();
+
+ /* we'll always have more TC's than VPE's, so loop setting everything
+ to a sensible state */
+ for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) {
+ settc(i);
+
+ /* VPE's */
+ if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) {
+
+ /* deactivate all but vpe0 */
+ if (i != 0) {
+ unsigned long tmp = read_vpe_c0_vpeconf0();
+
+ tmp &= ~VPECONF0_VPA;
+
+ /* master VPE */
+ tmp |= VPECONF0_MVP;
+ write_vpe_c0_vpeconf0(tmp);
+
+ /* Record this as available CPU */
+ if (i < max_cpus) {
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
+ }
+ }
+
+ /* disable multi-threading with TC's */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+ if (i != 0) {
+ write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
+ write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP);
+
+ /* set config to be the same as vpe0, particularly kseg0 coherency alg */
+ write_vpe_c0_config( read_c0_config());
+ }
+
+ }
+
+ /* TC's */
+
+ if (i != 0) {
+ unsigned long tmp;
+
+ /* bind a TC to each VPE, May as well put all excess TC's
+ on the last VPE */
+ if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) )
+ write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) );
+ else {
+ write_tc_c0_tcbind( read_tc_c0_tcbind() | i);
+
+ /* and set XTC */
+ write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT));
+ }
+
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+ }
+ }
+
+ /* Release config state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* We'll wait until starting the secondaries before starting MVPE */
+
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+
+ /* set up ipi interrupts */
+ if (cpu_has_vint) {
+ set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+ set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+ }
+
+ cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+ cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
+
+ setup_irq(cpu_ipi_resched_irq, &irq_resched);
+ setup_irq(cpu_ipi_call_irq, &irq_call);
+
+ /* need to mark IPI's as IRQ_PER_CPU */
+ irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU;
+ irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU;
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ * assumes a 1:1 mapping of TC => VPE
+ */
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+ dvpe();
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ settc(cpu);
+
+ /* restart */
+ write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
+
+ /* enable the tc this vpe/cpu will be running */
+ write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A);
+
+ write_tc_c0_tchalt(0);
+
+ /* enable the VPE */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+
+ /* stack pointer */
+ write_tc_gpr_sp( __KSTK_TOS(idle));
+
+ /* global pointer */
+ write_tc_gpr_gp((unsigned long)idle->thread_info);
+
+ flush_icache_range((unsigned long)idle->thread_info,
+ (unsigned long)idle->thread_info +
+ sizeof(struct thread_info));
+
+ /* finally out of configuration and into chaos */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ evpe(EVPE_ENABLE);
+}
+
+void prom_init_secondary(void)
+{
+ write_c0_status((read_c0_status() & ~ST0_IM ) |
+ (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7));
+}
+
+void prom_smp_finish(void)
+{
+ write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+
+ local_irq_enable();
+}
+
+void prom_cpus_done(void)
+{
+}
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+ int i;
+ unsigned long flags;
+ int vpflags;
+
+ local_irq_save (flags);
+
+ vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */
+
+ switch (action) {
+ case SMP_CALL_FUNCTION:
+ i = C_SW1;
+ break;
+
+ case SMP_RESCHEDULE_YOURSELF:
+ default:
+ i = C_SW0;
+ break;
+ }
+
+ /* 1:1 mapping of vpe and tc... */
+ settc(cpu);
+ write_vpe_c0_cause(read_vpe_c0_cause() | i);
+ evpe(vpflags);
+
+ local_irq_restore(flags);
+}
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 21e3e13..ee98eeb 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -7,6 +7,7 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
+#include <linux/config.h>
#include <linux/a.out.h>
#include <linux/errno.h>
#include <linux/linkage.h>
@@ -26,6 +27,7 @@
#include <linux/msg.h>
#include <linux/shm.h>
#include <linux/compiler.h>
+#include <linux/module.h>
#include <asm/branch.h>
#include <asm/cachectl.h>
@@ -56,6 +58,8 @@
unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
+EXPORT_SYMBOL(shm_align_mask);
+
#define COLOUR_ALIGN(addr,pgoff) \
((((addr) + shm_align_mask) & ~shm_align_mask) + \
(((pgoff) << PAGE_SHIFT) & shm_align_mask))
@@ -173,14 +177,28 @@
{
unsigned long clone_flags;
unsigned long newsp;
- int *parent_tidptr, *child_tidptr;
+ int __user *parent_tidptr, *child_tidptr;
clone_flags = regs.regs[4];
newsp = regs.regs[5];
if (!newsp)
newsp = regs.regs[29];
- parent_tidptr = (int *) regs.regs[6];
- child_tidptr = (int *) regs.regs[7];
+ parent_tidptr = (int __user *) regs.regs[6];
+#ifdef CONFIG_32BIT
+ /* We need to fetch the fifth argument off the stack. */
+ child_tidptr = NULL;
+ if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) {
+ int __user *__user *usp = (int __user *__user *) regs.regs[29];
+ if (regs.regs[2] == __NR_syscall) {
+ if (get_user (child_tidptr, &usp[5]))
+ return -EFAULT;
+ }
+ else if (get_user (child_tidptr, &usp[4]))
+ return -EFAULT;
+ }
+#else
+ child_tidptr = (int __user *) regs.regs[8];
+#endif
return do_fork(clone_flags, newsp, ®s, 0,
parent_tidptr, child_tidptr);
}
@@ -242,6 +260,16 @@
return error;
}
+void sys_set_thread_area(unsigned long addr)
+{
+ struct thread_info *ti = current->thread_info;
+
+ ti->tp_value = addr;
+
+ /* If some future MIPS implementation has this register in hardware,
+ * we will need to update it here (and in context switches). */
+}
+
asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
{
int tmp, len;
diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c
index 7ae4af4..52924f8 100644
--- a/arch/mips/kernel/sysirix.c
+++ b/arch/mips/kernel/sysirix.c
@@ -73,32 +73,30 @@
}
/* The prctl commands. */
-#define PR_MAXPROCS 1 /* Tasks/user. */
-#define PR_ISBLOCKED 2 /* If blocked, return 1. */
-#define PR_SETSTACKSIZE 3 /* Set largest task stack size. */
-#define PR_GETSTACKSIZE 4 /* Get largest task stack size. */
-#define PR_MAXPPROCS 5 /* Num parallel tasks. */
-#define PR_UNBLKONEXEC 6 /* When task exec/exit's, unblock. */
-#define PR_SETEXITSIG 8 /* When task exit's, set signal. */
-#define PR_RESIDENT 9 /* Make task unswappable. */
-#define PR_ATTACHADDR 10 /* (Re-)Connect a vma to a task. */
-#define PR_DETACHADDR 11 /* Disconnect a vma from a task. */
-#define PR_TERMCHILD 12 /* When parent sleeps with fishes, kill child. */
-#define PR_GETSHMASK 13 /* Get the sproc() share mask. */
-#define PR_GETNSHARE 14 /* Number of share group members. */
-#define PR_COREPID 15 /* Add task pid to name when it core. */
-#define PR_ATTACHADDRPERM 16 /* (Re-)Connect vma, with specified prot. */
-#define PR_PTHREADEXIT 17 /* Kill a pthread without prejudice. */
+#define PR_MAXPROCS 1 /* Tasks/user. */
+#define PR_ISBLOCKED 2 /* If blocked, return 1. */
+#define PR_SETSTACKSIZE 3 /* Set largest task stack size. */
+#define PR_GETSTACKSIZE 4 /* Get largest task stack size. */
+#define PR_MAXPPROCS 5 /* Num parallel tasks. */
+#define PR_UNBLKONEXEC 6 /* When task exec/exit's, unblock. */
+#define PR_SETEXITSIG 8 /* When task exit's, set signal. */
+#define PR_RESIDENT 9 /* Make task unswappable. */
+#define PR_ATTACHADDR 10 /* (Re-)Connect a vma to a task. */
+#define PR_DETACHADDR 11 /* Disconnect a vma from a task. */
+#define PR_TERMCHILD 12 /* Kill child if the parent dies. */
+#define PR_GETSHMASK 13 /* Get the sproc() share mask. */
+#define PR_GETNSHARE 14 /* Number of share group members. */
+#define PR_COREPID 15 /* Add task pid to name when it core. */
+#define PR_ATTACHADDRPERM 16 /* (Re-)Connect vma, with specified prot. */
+#define PR_PTHREADEXIT 17 /* Kill a pthread, only for IRIX 6.[234] */
-asmlinkage int irix_prctl(struct pt_regs *regs)
+asmlinkage int irix_prctl(unsigned option, ...)
{
- unsigned long cmd;
- int error = 0, base = 0;
+ va_list args;
+ int error = 0;
- if (regs->regs[2] == 1000)
- base = 1;
- cmd = regs->regs[base + 4];
- switch (cmd) {
+ va_start(args, option);
+ switch (option) {
case PR_MAXPROCS:
printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
current->comm, current->pid);
@@ -111,7 +109,7 @@
printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n",
current->comm, current->pid);
read_lock(&tasklist_lock);
- task = find_task_by_pid(regs->regs[base + 5]);
+ task = find_task_by_pid(va_arg(args, pid_t));
error = -ESRCH;
if (error)
error = (task->run_list.next != NULL);
@@ -121,7 +119,7 @@
}
case PR_SETSTACKSIZE: {
- long value = regs->regs[base + 5];
+ long value = va_arg(args, long);
printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n",
current->comm, current->pid, (unsigned long) value);
@@ -222,24 +220,20 @@
error = -EINVAL;
break;
- case PR_PTHREADEXIT:
- printk("irix_prctl[%s:%d]: Wants PR_PTHREADEXIT\n",
- current->comm, current->pid);
- do_exit(regs->regs[base + 5]);
-
default:
printk("irix_prctl[%s:%d]: Non-existant opcode %d\n",
- current->comm, current->pid, (int)cmd);
+ current->comm, current->pid, option);
error = -EINVAL;
break;
}
+ va_end(args);
return error;
}
#undef DEBUG_PROCGRPS
-extern unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt);
+extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt);
extern int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
extern char *prom_getenv(char *name);
extern long prom_setenv(char *name, char *value);
@@ -276,23 +270,19 @@
cmd = regs->regs[base + 4];
switch(cmd) {
case SGI_SYSID: {
- char *buf = (char *) regs->regs[base + 5];
+ char __user *buf = (char __user *) regs->regs[base + 5];
/* XXX Use ethernet addr.... */
- retval = clear_user(buf, 64);
+ retval = clear_user(buf, 64) ? -EFAULT : 0;
break;
}
#if 0
case SGI_RDNAME: {
int pid = (int) regs->regs[base + 5];
- char *buf = (char *) regs->regs[base + 6];
+ char __user *buf = (char __user *) regs->regs[base + 6];
struct task_struct *p;
char tcomm[sizeof(current->comm)];
- if (!access_ok(VERIFY_WRITE, buf, sizeof(tcomm))) {
- retval = -EFAULT;
- break;
- }
read_lock(&tasklist_lock);
p = find_task_by_pid(pid);
if (!p) {
@@ -304,34 +294,28 @@
read_unlock(&tasklist_lock);
/* XXX Need to check sizes. */
- copy_to_user(buf, tcomm, sizeof(tcomm));
- retval = 0;
+ retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0;
break;
}
case SGI_GETNVRAM: {
- char *name = (char *) regs->regs[base+5];
- char *buf = (char *) regs->regs[base+6];
+ char __user *name = (char __user *) regs->regs[base+5];
+ char __user *buf = (char __user *) regs->regs[base+6];
char *value;
return -EINVAL; /* til I fix it */
- if (!access_ok(VERIFY_WRITE, buf, 128)) {
- retval = -EFAULT;
- break;
- }
value = prom_getenv(name); /* PROM lock? */
if (!value) {
retval = -EINVAL;
break;
}
/* Do I strlen() for the length? */
- copy_to_user(buf, value, 128);
- retval = 0;
+ retval = copy_to_user(buf, value, 128) ? -EFAULT : 0;
break;
}
case SGI_SETNVRAM: {
- char *name = (char *) regs->regs[base+5];
- char *value = (char *) regs->regs[base+6];
+ char __user *name = (char __user *) regs->regs[base+5];
+ char __user *value = (char __user *) regs->regs[base+6];
return -EINVAL; /* til I fix it */
retval = prom_setenv(name, value);
/* XXX make sure retval conforms to syssgi(2) */
@@ -407,16 +391,16 @@
case SGI_SETGROUPS:
retval = sys_setgroups((int) regs->regs[base + 5],
- (gid_t *) regs->regs[base + 6]);
+ (gid_t __user *) regs->regs[base + 6]);
break;
case SGI_GETGROUPS:
retval = sys_getgroups((int) regs->regs[base + 5],
- (gid_t *) regs->regs[base + 6]);
+ (gid_t __user *) regs->regs[base + 6]);
break;
case SGI_RUSAGE: {
- struct rusage *ru = (struct rusage *) regs->regs[base + 6];
+ struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6];
switch((int) regs->regs[base + 5]) {
case 0:
@@ -453,7 +437,7 @@
case SGI_ELFMAP:
retval = irix_mapelf((int) regs->regs[base + 5],
- (struct elf_phdr *) regs->regs[base + 6],
+ (struct elf_phdr __user *) regs->regs[base + 6],
(int) regs->regs[base + 7]);
break;
@@ -468,24 +452,24 @@
case SGI_PHYSP: {
unsigned long addr = regs->regs[base + 5];
- int *pageno = (int *) (regs->regs[base + 6]);
+ int __user *pageno = (int __user *) (regs->regs[base + 6]);
struct mm_struct *mm = current->mm;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
- if (!access_ok(VERIFY_WRITE, pageno, sizeof(int)))
- return -EFAULT;
-
down_read(&mm->mmap_sem);
pgdp = pgd_offset(mm, addr);
- pmdp = pmd_offset(pgdp, addr);
+ pudp = pud_offset(pgdp, addr);
+ pmdp = pmd_offset(pudp, addr);
ptep = pte_offset(pmdp, addr);
retval = -EINVAL;
if (ptep) {
pte_t pte = *ptep;
if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) {
+ /* b0rked on 64-bit */
retval = put_user((pte_val(pte) & PAGE_MASK) >>
PAGE_SHIFT, pageno);
}
@@ -496,7 +480,7 @@
case SGI_INVENT: {
int arg1 = (int) regs->regs [base + 5];
- void *buffer = (void *) regs->regs [base + 6];
+ void __user *buffer = (void __user *) regs->regs [base + 6];
int count = (int) regs->regs [base + 7];
switch (arg1) {
@@ -692,8 +676,8 @@
}
/* XXX need more than this... */
-asmlinkage int irix_mount(char *dev_name, char *dir_name, unsigned long flags,
- char *type, void *data, int datalen)
+asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name,
+ unsigned long flags, char __user *type, void __user *data, int datalen)
{
printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n",
current->comm, current->pid,
@@ -708,8 +692,8 @@
char f_fname[6], f_fpack[6];
};
-asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf,
- int len, int fs_type)
+asmlinkage int irix_statfs(const char __user *path,
+ struct irix_statfs __user *buf, int len, int fs_type)
{
struct nameidata nd;
struct kstatfs kbuf;
@@ -724,6 +708,7 @@
error = -EFAULT;
goto out;
}
+
error = user_path_walk(path, &nd);
if (error)
goto out;
@@ -732,18 +717,17 @@
if (error)
goto dput_and_out;
- __put_user(kbuf.f_type, &buf->f_type);
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error = __put_user(kbuf.f_type, &buf->f_type);
+ error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
for (i = 0; i < 6; i++) {
- __put_user(0, &buf->f_fname[i]);
- __put_user(0, &buf->f_fpack[i]);
+ error |= __put_user(0, &buf->f_fname[i]);
+ error |= __put_user(0, &buf->f_fpack[i]);
}
- error = 0;
dput_and_out:
path_release(&nd);
@@ -751,7 +735,7 @@
return error;
}
-asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf)
+asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf)
{
struct kstatfs kbuf;
struct file *file;
@@ -761,6 +745,7 @@
error = -EFAULT;
goto out;
}
+
if (!(file = fget(fd))) {
error = -EBADF;
goto out;
@@ -770,16 +755,17 @@
if (error)
goto out_f;
- __put_user(kbuf.f_type, &buf->f_type);
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- for(i = 0; i < 6; i++) {
- __put_user(0, &buf->f_fname[i]);
- __put_user(0, &buf->f_fpack[i]);
+ error = __put_user(kbuf.f_type, &buf->f_type);
+ error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+
+ for (i = 0; i < 6; i++) {
+ error |= __put_user(0, &buf->f_fname[i]);
+ error |= __put_user(0, &buf->f_fpack[i]);
}
out_f:
@@ -806,14 +792,15 @@
return error;
}
-asmlinkage int irix_times(struct tms * tbuf)
+asmlinkage int irix_times(struct tms __user *tbuf)
{
int err = 0;
if (tbuf) {
if (!access_ok(VERIFY_WRITE,tbuf,sizeof *tbuf))
return -EFAULT;
- err |= __put_user(current->utime, &tbuf->tms_utime);
+
+ err = __put_user(current->utime, &tbuf->tms_utime);
err |= __put_user(current->stime, &tbuf->tms_stime);
err |= __put_user(current->signal->cutime, &tbuf->tms_cutime);
err |= __put_user(current->signal->cstime, &tbuf->tms_cstime);
@@ -829,13 +816,13 @@
if(regs->regs[2] == 1000)
base = 1;
- filename = getname((char *) (long)regs->regs[base + 4]);
+ filename = getname((char __user *) (long)regs->regs[base + 4]);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
- error = do_execve(filename, (char **) (long)regs->regs[base + 5],
- (char **) 0, regs);
+ error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
+ NULL, regs);
putname(filename);
return error;
@@ -848,12 +835,12 @@
if (regs->regs[2] == 1000)
base = 1;
- filename = getname((char *) (long)regs->regs[base + 4]);
+ filename = getname((char __user *) (long)regs->regs[base + 4]);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
- error = do_execve(filename, (char **) (long)regs->regs[base + 5],
- (char **) (long)regs->regs[base + 6], regs);
+ error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
+ (char __user * __user *) (long)regs->regs[base + 6], regs);
putname(filename);
return error;
@@ -909,22 +896,17 @@
return sys_socket(family, type, protocol);
}
-asmlinkage int irix_getdomainname(char *name, int len)
+asmlinkage int irix_getdomainname(char __user *name, int len)
{
- int error;
-
- if (!access_ok(VERIFY_WRITE, name, len))
- return -EFAULT;
+ int err;
down_read(&uts_sem);
if (len > __NEW_UTS_LEN)
len = __NEW_UTS_LEN;
- error = 0;
- if (copy_to_user(name, system_utsname.domainname, len))
- error = -EFAULT;
+ err = copy_to_user(name, system_utsname.domainname, len) ? -EFAULT : 0;
up_read(&uts_sem);
- return error;
+ return err;
}
asmlinkage unsigned long irix_getpagesize(void)
@@ -940,12 +922,13 @@
case 0:
return sys_msgget((key_t) arg0, (int) arg1);
case 1:
- return sys_msgctl((int) arg0, (int) arg1, (struct msqid_ds *)arg2);
+ return sys_msgctl((int) arg0, (int) arg1,
+ (struct msqid_ds __user *)arg2);
case 2:
- return sys_msgrcv((int) arg0, (struct msgbuf *) arg1,
+ return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1,
(size_t) arg2, (long) arg3, (int) arg4);
case 3:
- return sys_msgsnd((int) arg0, (struct msgbuf *) arg1,
+ return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1,
(size_t) arg2, (int) arg3);
default:
return -EINVAL;
@@ -957,12 +940,13 @@
{
switch (opcode) {
case 0:
- return do_shmat((int) arg0, (char *)arg1, (int) arg2,
+ return do_shmat((int) arg0, (char __user *) arg1, (int) arg2,
(unsigned long *) arg3);
case 1:
- return sys_shmctl((int)arg0, (int)arg1, (struct shmid_ds *)arg2);
+ return sys_shmctl((int)arg0, (int)arg1,
+ (struct shmid_ds __user *)arg2);
case 2:
- return sys_shmdt((char *)arg0);
+ return sys_shmdt((char __user *)arg0);
case 3:
return sys_shmget((key_t) arg0, (int) arg1, (int) arg2);
default:
@@ -980,7 +964,7 @@
case 1:
return sys_semget((key_t) arg0, (int) arg1, (int) arg2);
case 2:
- return sys_semop((int) arg0, (struct sembuf *)arg1,
+ return sys_semop((int) arg0, (struct sembuf __user *)arg1,
(unsigned int) arg2);
default:
return -EINVAL;
@@ -998,15 +982,16 @@
lock_kernel();
retval = fn(file, offset, origin);
unlock_kernel();
+
return retval;
}
asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow,
int origin)
{
- int retval;
struct file * file;
loff_t offset;
+ int retval;
retval = -EBADF;
file = fget(fd);
@@ -1031,12 +1016,12 @@
return 0;
}
-asmlinkage int irix_sgikopt(char *istring, char *ostring, int len)
+asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len)
{
return -EINVAL;
}
-asmlinkage int irix_gettimeofday(struct timeval *tv)
+asmlinkage int irix_gettimeofday(struct timeval __user *tv)
{
time_t sec;
long nsec, seq;
@@ -1077,7 +1062,7 @@
if (max_size > file->f_dentry->d_inode->i_size) {
old_pos = sys_lseek (fd, max_size - 1, 0);
- sys_write (fd, "", 1);
+ sys_write (fd, (void __user *) "", 1);
sys_lseek (fd, old_pos, 0);
}
}
@@ -1102,7 +1087,7 @@
return -EINVAL;
}
-asmlinkage int irix_pagelock(char *addr, int len, int op)
+asmlinkage int irix_pagelock(char __user *addr, int len, int op)
{
printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n",
current->comm, current->pid, addr, len, op);
@@ -1142,7 +1127,7 @@
return error;
}
-asmlinkage int irix_systeminfo(int cmd, char *buf, int cnt)
+asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt)
{
printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n",
current->comm, current->pid, cmd, buf, cnt);
@@ -1158,14 +1143,14 @@
char _unused3[257], _unused4[257], _unused5[257];
};
-asmlinkage int irix_uname(struct iuname *buf)
+asmlinkage int irix_uname(struct iuname __user *buf)
{
down_read(&uts_sem);
- if (copy_to_user(system_utsname.sysname, buf->sysname, 65)
- || copy_to_user(system_utsname.nodename, buf->nodename, 65)
- || copy_to_user(system_utsname.release, buf->release, 65)
- || copy_to_user(system_utsname.version, buf->version, 65)
- || copy_to_user(system_utsname.machine, buf->machine, 65)) {
+ if (copy_from_user(system_utsname.sysname, buf->sysname, 65)
+ || copy_from_user(system_utsname.nodename, buf->nodename, 65)
+ || copy_from_user(system_utsname.release, buf->release, 65)
+ || copy_from_user(system_utsname.version, buf->version, 65)
+ || copy_from_user(system_utsname.machine, buf->machine, 65)) {
return -EFAULT;
}
up_read(&uts_sem);
@@ -1175,7 +1160,7 @@
#undef DEBUG_XSTAT
-static int irix_xstat32_xlate(struct kstat *stat, void *ubuf)
+static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf)
{
struct xstat32 {
u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid;
@@ -1215,7 +1200,7 @@
return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0;
}
-static int irix_xstat64_xlate(struct kstat *stat, void *ubuf)
+static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf)
{
struct xstat64 {
u32 st_dev; s32 st_pad1[3];
@@ -1265,7 +1250,7 @@
return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0;
}
-asmlinkage int irix_xstat(int version, char *filename, struct stat *statbuf)
+asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf)
{
int retval;
struct kstat stat;
@@ -1291,7 +1276,7 @@
return retval;
}
-asmlinkage int irix_lxstat(int version, char *filename, struct stat *statbuf)
+asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf)
{
int error;
struct kstat stat;
@@ -1318,7 +1303,7 @@
return error;
}
-asmlinkage int irix_fxstat(int version, int fd, struct stat *statbuf)
+asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf)
{
int error;
struct kstat stat;
@@ -1344,7 +1329,7 @@
return error;
}
-asmlinkage int irix_xmknod(int ver, char *filename, int mode, unsigned dev)
+asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev)
{
int retval;
printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n",
@@ -1364,7 +1349,7 @@
return retval;
}
-asmlinkage int irix_swapctl(int cmd, char *arg)
+asmlinkage int irix_swapctl(int cmd, char __user *arg)
{
printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n",
current->comm, current->pid, cmd, arg);
@@ -1380,7 +1365,7 @@
char f_fstr[32]; u32 f_filler[16];
};
-asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf)
+asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
{
struct nameidata nd;
struct kstatfs kbuf;
@@ -1388,10 +1373,9 @@
printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n",
current->comm, current->pid, fname, buf);
- if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
- error = -EFAULT;
- goto out;
- }
+ if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
+ return -EFAULT;
+
error = user_path_walk(fname, &nd);
if (error)
goto out;
@@ -1399,27 +1383,25 @@
if (error)
goto dput_and_out;
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
#ifdef __MIPSEB__
- __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
#else
- __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
#endif
for (i = 0; i < 16; i++)
- __put_user(0, &buf->f_basetype[i]);
- __put_user(0, &buf->f_flag);
- __put_user(kbuf.f_namelen, &buf->f_namemax);
+ error |= __put_user(0, &buf->f_basetype[i]);
+ error |= __put_user(0, &buf->f_flag);
+ error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
for (i = 0; i < 32; i++)
- __put_user(0, &buf->f_fstr[i]);
-
- error = 0;
+ error |= __put_user(0, &buf->f_fstr[i]);
dput_and_out:
path_release(&nd);
@@ -1427,7 +1409,7 @@
return error;
}
-asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf)
+asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf)
{
struct kstatfs kbuf;
struct file *file;
@@ -1436,10 +1418,9 @@
printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n",
current->comm, current->pid, fd, buf);
- if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
- error = -EFAULT;
- goto out;
- }
+ if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
+ return -EFAULT;
+
if (!(file = fget(fd))) {
error = -EBADF;
goto out;
@@ -1448,24 +1429,24 @@
if (error)
goto out_f;
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+ error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
#ifdef __MIPSEB__
- __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
#else
- __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
#endif
for(i = 0; i < 16; i++)
- __put_user(0, &buf->f_basetype[i]);
- __put_user(0, &buf->f_flag);
- __put_user(kbuf.f_namelen, &buf->f_namemax);
- __clear_user(&buf->f_fstr, sizeof(buf->f_fstr));
+ error |= __put_user(0, &buf->f_basetype[i]);
+ error |= __put_user(0, &buf->f_flag);
+ error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
+ error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0;
out_f:
fput(file);
@@ -1489,7 +1470,7 @@
return -EINVAL;
}
-asmlinkage int irix_truncate64(char *name, int pad, int size1, int size2)
+asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2)
{
int retval;
@@ -1522,6 +1503,7 @@
int len, prot, flags, fd, off1, off2, error, base = 0;
unsigned long addr, pgoff, *sp;
struct file *file = NULL;
+ int err;
if (regs->regs[2] == 1000)
base = 1;
@@ -1531,36 +1513,31 @@
prot = regs->regs[base + 6];
if (!base) {
flags = regs->regs[base + 7];
- if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long)))) {
- error = -EFAULT;
- goto out;
- }
+ if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long))))
+ return -EFAULT;
fd = sp[0];
- __get_user(off1, &sp[1]);
- __get_user(off2, &sp[2]);
+ err = __get_user(off1, &sp[1]);
+ err |= __get_user(off2, &sp[2]);
} else {
- if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long)))) {
- error = -EFAULT;
- goto out;
- }
- __get_user(flags, &sp[0]);
- __get_user(fd, &sp[1]);
- __get_user(off1, &sp[2]);
- __get_user(off2, &sp[3]);
+ if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long))))
+ return -EFAULT;
+ err = __get_user(flags, &sp[0]);
+ err |= __get_user(fd, &sp[1]);
+ err |= __get_user(off1, &sp[2]);
+ err |= __get_user(off2, &sp[3]);
}
- if (off1 & PAGE_MASK) {
- error = -EOVERFLOW;
- goto out;
- }
+ if (err)
+ return err;
+
+ if (off1 & PAGE_MASK)
+ return -EOVERFLOW;
pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT);
if (!(flags & MAP_ANONYMOUS)) {
- if (!(file = fget(fd))) {
- error = -EBADF;
- goto out;
- }
+ if (!(file = fget(fd)))
+ return -EBADF;
/* Ok, bad taste hack follows, try to think in something else
when reading this */
@@ -1570,7 +1547,7 @@
if (max_size > file->f_dentry->d_inode->i_size) {
old_pos = sys_lseek (fd, max_size - 1, 0);
- sys_write (fd, "", 1);
+ sys_write (fd, (void __user *) "", 1);
sys_lseek (fd, old_pos, 0);
}
}
@@ -1585,7 +1562,6 @@
if (file)
fput(file);
-out:
return error;
}
@@ -1597,7 +1573,7 @@
return -EINVAL;
}
-asmlinkage int irix_pread(int fd, char *buf, int cnt, int off64,
+asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64,
int off1, int off2)
{
printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n",
@@ -1606,7 +1582,7 @@
return -EINVAL;
}
-asmlinkage int irix_pwrite(int fd, char *buf, int cnt, int off64,
+asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64,
int off1, int off2)
{
printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n",
@@ -1638,7 +1614,7 @@
u32 f_filler[16];
};
-asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
+asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf)
{
struct nameidata nd;
struct kstatfs kbuf;
@@ -1650,6 +1626,7 @@
error = -EFAULT;
goto out;
}
+
error = user_path_walk(fname, &nd);
if (error)
goto out;
@@ -1657,27 +1634,25 @@
if (error)
goto dput_and_out;
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+ error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
#ifdef __MIPSEB__
- __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
#else
- __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
#endif
for(i = 0; i < 16; i++)
- __put_user(0, &buf->f_basetype[i]);
- __put_user(0, &buf->f_flag);
- __put_user(kbuf.f_namelen, &buf->f_namemax);
+ error |= __put_user(0, &buf->f_basetype[i]);
+ error |= __put_user(0, &buf->f_flag);
+ error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
for(i = 0; i < 32; i++)
- __put_user(0, &buf->f_fstr[i]);
-
- error = 0;
+ error |= __put_user(0, &buf->f_fstr[i]);
dput_and_out:
path_release(&nd);
@@ -1685,7 +1660,7 @@
return error;
}
-asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf)
+asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf)
{
struct kstatfs kbuf;
struct file *file;
@@ -1706,24 +1681,24 @@
if (error)
goto out_f;
- __put_user(kbuf.f_bsize, &buf->f_bsize);
- __put_user(kbuf.f_frsize, &buf->f_frsize);
- __put_user(kbuf.f_blocks, &buf->f_blocks);
- __put_user(kbuf.f_bfree, &buf->f_bfree);
- __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
- __put_user(kbuf.f_files, &buf->f_files);
- __put_user(kbuf.f_ffree, &buf->f_ffree);
- __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+ error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+ error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+ error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+ error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+ error |= __put_user(kbuf.f_files, &buf->f_files);
+ error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+ error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
#ifdef __MIPSEB__
- __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
#else
- __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+ error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
#endif
for(i = 0; i < 16; i++)
- __put_user(0, &buf->f_basetype[i]);
- __put_user(0, &buf->f_flag);
- __put_user(kbuf.f_namelen, &buf->f_namemax);
- __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i]));
+ error |= __put_user(0, &buf->f_basetype[i]);
+ error |= __put_user(0, &buf->f_flag);
+ error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
+ error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0;
out_f:
fput(file);
@@ -1731,9 +1706,9 @@
return error;
}
-asmlinkage int irix_getmountid(char *fname, unsigned long *midbuf)
+asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf)
{
- int err = 0;
+ int err;
printk("[%s:%d] irix_getmountid(%s, %p)\n",
current->comm, current->pid, fname, midbuf);
@@ -1746,7 +1721,7 @@
* fsid of the filesystem to try and make the right decision, but
* we don't have this so for now. XXX
*/
- err |= __put_user(0, &midbuf[0]);
+ err = __put_user(0, &midbuf[0]);
err |= __put_user(0, &midbuf[1]);
err |= __put_user(0, &midbuf[2]);
err |= __put_user(0, &midbuf[3]);
@@ -1773,8 +1748,8 @@
};
struct irix_dirent32_callback {
- struct irix_dirent32 *current_dir;
- struct irix_dirent32 *previous;
+ struct irix_dirent32 __user *current_dir;
+ struct irix_dirent32 __user *previous;
int count;
int error;
};
@@ -1782,13 +1757,13 @@
#define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de)))
#define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1))
-static int irix_filldir32(void *__buf, const char *name, int namlen,
- loff_t offset, ino_t ino, unsigned int d_type)
+static int irix_filldir32(void *__buf, const char *name,
+ int namlen, loff_t offset, ino_t ino, unsigned int d_type)
{
- struct irix_dirent32 *dirent;
- struct irix_dirent32_callback *buf =
- (struct irix_dirent32_callback *)__buf;
+ struct irix_dirent32 __user *dirent;
+ struct irix_dirent32_callback *buf = __buf;
unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1);
+ int err = 0;
#ifdef DEBUG_GETDENTS
printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]",
@@ -1799,25 +1774,26 @@
return -EINVAL;
dirent = buf->previous;
if (dirent)
- __put_user(offset, &dirent->d_off);
+ err = __put_user(offset, &dirent->d_off);
dirent = buf->current_dir;
- buf->previous = dirent;
- __put_user(ino, &dirent->d_ino);
- __put_user(reclen, &dirent->d_reclen);
- copy_to_user(dirent->d_name, name, namlen);
- __put_user(0, &dirent->d_name[namlen]);
- ((char *) dirent) += reclen;
+ err |= __put_user(dirent, &buf->previous);
+ err |= __put_user(ino, &dirent->d_ino);
+ err |= __put_user(reclen, &dirent->d_reclen);
+ err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0;
+ err |= __put_user(0, &dirent->d_name[namlen]);
+ dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen);
+
buf->current_dir = dirent;
buf->count -= reclen;
- return 0;
+ return err;
}
-asmlinkage int irix_ngetdents(unsigned int fd, void * dirent,
- unsigned int count, int *eob)
+asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent,
+ unsigned int count, int __user *eob)
{
struct file *file;
- struct irix_dirent32 *lastdirent;
+ struct irix_dirent32 __user *lastdirent;
struct irix_dirent32_callback buf;
int error;
@@ -1830,7 +1806,7 @@
if (!file)
goto out;
- buf.current_dir = (struct irix_dirent32 *) dirent;
+ buf.current_dir = (struct irix_dirent32 __user *) dirent;
buf.previous = NULL;
buf.count = count;
buf.error = 0;
@@ -1870,8 +1846,8 @@
};
struct irix_dirent64_callback {
- struct irix_dirent64 *curr;
- struct irix_dirent64 *previous;
+ struct irix_dirent64 __user *curr;
+ struct irix_dirent64 __user *previous;
int count;
int error;
};
@@ -1879,37 +1855,44 @@
#define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de)))
#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
-static int irix_filldir64(void * __buf, const char * name, int namlen,
- loff_t offset, ino_t ino, unsigned int d_type)
+static int irix_filldir64(void *__buf, const char *name,
+ int namlen, loff_t offset, ino_t ino, unsigned int d_type)
{
- struct irix_dirent64 *dirent;
- struct irix_dirent64_callback * buf =
- (struct irix_dirent64_callback *) __buf;
+ struct irix_dirent64 __user *dirent;
+ struct irix_dirent64_callback * buf = __buf;
unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1);
+ int err = 0;
- buf->error = -EINVAL; /* only used if we fail.. */
+ if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf)))
+ return -EFAULT;
+
+ if (__put_user(-EINVAL, &buf->error)) /* only used if we fail.. */
+ return -EFAULT;
if (reclen > buf->count)
return -EINVAL;
dirent = buf->previous;
if (dirent)
- __put_user(offset, &dirent->d_off);
+ err = __put_user(offset, &dirent->d_off);
dirent = buf->curr;
buf->previous = dirent;
- __put_user(ino, &dirent->d_ino);
- __put_user(reclen, &dirent->d_reclen);
- __copy_to_user(dirent->d_name, name, namlen);
- __put_user(0, &dirent->d_name[namlen]);
- ((char *) dirent) += reclen;
+ err |= __put_user(ino, &dirent->d_ino);
+ err |= __put_user(reclen, &dirent->d_reclen);
+ err |= __copy_to_user((char __user *)dirent->d_name, name, namlen)
+ ? -EFAULT : 0;
+ err |= __put_user(0, &dirent->d_name[namlen]);
+
+ dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen);
+
buf->curr = dirent;
buf->count -= reclen;
- return 0;
+ return err;
}
-asmlinkage int irix_getdents64(int fd, void *dirent, int cnt)
+asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt)
{
struct file *file;
- struct irix_dirent64 *lastdirent;
+ struct irix_dirent64 __user *lastdirent;
struct irix_dirent64_callback buf;
int error;
@@ -1929,7 +1912,7 @@
if (cnt < (sizeof(struct irix_dirent64) + 255))
goto out_f;
- buf.curr = (struct irix_dirent64 *) dirent;
+ buf.curr = (struct irix_dirent64 __user *) dirent;
buf.previous = NULL;
buf.count = cnt;
buf.error = 0;
@@ -1941,7 +1924,8 @@
error = buf.error;
goto out_f;
}
- lastdirent->d_off = (u64) file->f_pos;
+ if (put_user(file->f_pos, &lastdirent->d_off))
+ return -EFAULT;
#ifdef DEBUG_GETDENTS
printk("returning %d\n", cnt - buf.count);
#endif
@@ -1953,10 +1937,10 @@
return error;
}
-asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob)
+asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob)
{
struct file *file;
- struct irix_dirent64 *lastdirent;
+ struct irix_dirent64 __user *lastdirent;
struct irix_dirent64_callback buf;
int error;
@@ -1978,7 +1962,7 @@
goto out_f;
*eob = 0;
- buf.curr = (struct irix_dirent64 *) dirent;
+ buf.curr = (struct irix_dirent64 __user *) dirent;
buf.previous = NULL;
buf.count = cnt;
buf.error = 0;
@@ -1990,7 +1974,8 @@
error = buf.error;
goto out_f;
}
- lastdirent->d_off = (u64) file->f_pos;
+ if (put_user(file->f_pos, &lastdirent->d_off))
+ return -EFAULT;
#ifdef DEBUG_GETDENTS
printk("eob=%d returning %d\n", *eob, cnt - buf.count);
#endif
@@ -2053,14 +2038,14 @@
return retval;
}
-asmlinkage int irix_utssys(char *inbuf, int arg, int type, char *outbuf)
+asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf)
{
int retval;
switch(type) {
case 0:
/* uname() */
- retval = irix_uname((struct iuname *)inbuf);
+ retval = irix_uname((struct iuname __user *)inbuf);
goto out;
case 2:
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 0dd0df7a..787ed54 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -11,6 +11,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -25,6 +26,7 @@
#include <linux/module.h>
#include <asm/bootinfo.h>
+#include <asm/cache.h>
#include <asm/compiler.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -43,10 +45,6 @@
#define TICK_SIZE (tick_nsec / 1000)
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
/*
* forward reference
*/
@@ -76,7 +74,7 @@
static unsigned int sll32_usecs_per_cycle;
/* how many counter cycles in a jiffy */
-static unsigned long cycles_per_jiffy;
+static unsigned long cycles_per_jiffy __read_mostly;
/* Cycle counter value at the previous timer interrupt.. */
static unsigned int timerhi, timerlo;
@@ -98,7 +96,10 @@
return 0;
}
-static void null_hpt_init(unsigned int count) { /* nothing */ }
+static void null_hpt_init(unsigned int count)
+{
+ /* nothing */
+}
/*
@@ -108,8 +109,10 @@
{
unsigned int count;
+#ifndef CONFIG_SOC_PNX8550 /* pnx8550 resets to zero */
/* Ack this timer interrupt and set the next one. */
expirelo += cycles_per_jiffy;
+#endif
write_c0_compare(expirelo);
/* Check to see if we have missed any timer interrupts. */
@@ -224,7 +227,6 @@
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
ntp_clear();
-
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return 0;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index a53b1ed..6f3ff96 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -9,7 +9,7 @@
* Copyright (C) 1999 Silicon Graphics, Inc.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000, 01 MIPS Technologies, Inc.
- * Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005 Maciej W. Rozycki
*/
#include <linux/config.h>
#include <linux/init.h>
@@ -20,12 +20,16 @@
#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/kallsyms.h>
+#include <linux/bootmem.h>
#include <asm/bootinfo.h>
#include <asm/branch.h>
#include <asm/break.h>
#include <asm/cpu.h>
+#include <asm/dsp.h>
#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
#include <asm/module.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
@@ -54,14 +58,19 @@
extern asmlinkage void handle_fpe(void);
extern asmlinkage void handle_mdmx(void);
extern asmlinkage void handle_watch(void);
+extern asmlinkage void handle_mt(void);
+extern asmlinkage void handle_dsp(void);
extern asmlinkage void handle_mcheck(void);
extern asmlinkage void handle_reserved(void);
-extern int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
+extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_soft_struct *ctx);
void (*board_be_init)(void);
int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+void (*board_nmi_handler_setup)(void);
+void (*board_ejtag_handler_setup)(void);
+void (*board_bind_eic_interrupt)(int irq, int regset);
/*
* These constant is for searching for possible module text segments.
@@ -201,32 +210,47 @@
printk("Status: %08x ", (uint32_t) regs->cp0_status);
- if (regs->cp0_status & ST0_KX)
- printk("KX ");
- if (regs->cp0_status & ST0_SX)
- printk("SX ");
- if (regs->cp0_status & ST0_UX)
- printk("UX ");
- switch (regs->cp0_status & ST0_KSU) {
- case KSU_USER:
- printk("USER ");
- break;
- case KSU_SUPERVISOR:
- printk("SUPERVISOR ");
- break;
- case KSU_KERNEL:
- printk("KERNEL ");
- break;
- default:
- printk("BAD_MODE ");
- break;
+ if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) {
+ if (regs->cp0_status & ST0_KUO)
+ printk("KUo ");
+ if (regs->cp0_status & ST0_IEO)
+ printk("IEo ");
+ if (regs->cp0_status & ST0_KUP)
+ printk("KUp ");
+ if (regs->cp0_status & ST0_IEP)
+ printk("IEp ");
+ if (regs->cp0_status & ST0_KUC)
+ printk("KUc ");
+ if (regs->cp0_status & ST0_IEC)
+ printk("IEc ");
+ } else {
+ if (regs->cp0_status & ST0_KX)
+ printk("KX ");
+ if (regs->cp0_status & ST0_SX)
+ printk("SX ");
+ if (regs->cp0_status & ST0_UX)
+ printk("UX ");
+ switch (regs->cp0_status & ST0_KSU) {
+ case KSU_USER:
+ printk("USER ");
+ break;
+ case KSU_SUPERVISOR:
+ printk("SUPERVISOR ");
+ break;
+ case KSU_KERNEL:
+ printk("KERNEL ");
+ break;
+ default:
+ printk("BAD_MODE ");
+ break;
+ }
+ if (regs->cp0_status & ST0_ERL)
+ printk("ERL ");
+ if (regs->cp0_status & ST0_EXL)
+ printk("EXL ");
+ if (regs->cp0_status & ST0_IE)
+ printk("IE ");
}
- if (regs->cp0_status & ST0_ERL)
- printk("ERL ");
- if (regs->cp0_status & ST0_EXL)
- printk("EXL ");
- if (regs->cp0_status & ST0_IE)
- printk("IE ");
printk("\n");
printk("Cause : %08x\n", cause);
@@ -252,29 +276,18 @@
static DEFINE_SPINLOCK(die_lock);
-NORET_TYPE void __die(const char * str, struct pt_regs * regs,
- const char * file, const char * func, unsigned long line)
+NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs)
{
static int die_counter;
console_verbose();
spin_lock_irq(&die_lock);
- printk("%s", str);
- if (file && func)
- printk(" in %s:%s, line %ld", file, func, line);
- printk("[#%d]:\n", ++die_counter);
+ printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
spin_unlock_irq(&die_lock);
do_exit(SIGSEGV);
}
-void __die_if_kernel(const char * str, struct pt_regs * regs,
- const char * file, const char * func, unsigned long line)
-{
- if (!user_mode(regs))
- __die(str, regs, file, func, line);
-}
-
extern const struct exception_table_entry __start___dbe_table[];
extern const struct exception_table_entry __stop___dbe_table[];
@@ -339,9 +352,9 @@
static inline int get_insn_opcode(struct pt_regs *regs, unsigned int *opcode)
{
- unsigned int *epc;
+ unsigned int __user *epc;
- epc = (unsigned int *) regs->cp0_epc +
+ epc = (unsigned int __user *) regs->cp0_epc +
((regs->cp0_cause & CAUSEF_BD) != 0);
if (!get_user(*opcode, epc))
return 0;
@@ -360,6 +373,10 @@
#define OFFSET 0x0000ffff
#define LL 0xc0000000
#define SC 0xe0000000
+#define SPEC3 0x7c000000
+#define RD 0x0000f800
+#define FUNC 0x0000003f
+#define RDHWR 0x0000003b
/*
* The ll_bit is cleared by r*_switch.S
@@ -371,7 +388,7 @@
static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode)
{
- unsigned long value, *vaddr;
+ unsigned long value, __user *vaddr;
long offset;
int signal = 0;
@@ -385,7 +402,8 @@
offset <<= 16;
offset >>= 16;
- vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+ vaddr = (unsigned long __user *)
+ ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
if ((unsigned long)vaddr & 3) {
signal = SIGBUS;
@@ -407,9 +425,10 @@
preempt_enable();
+ compute_return_epc(regs);
+
regs->regs[(opcode & RT) >> 16] = value;
- compute_return_epc(regs);
return;
sig:
@@ -418,7 +437,8 @@
static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
{
- unsigned long *vaddr, reg;
+ unsigned long __user *vaddr;
+ unsigned long reg;
long offset;
int signal = 0;
@@ -432,7 +452,8 @@
offset <<= 16;
offset >>= 16;
- vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+ vaddr = (unsigned long __user *)
+ ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
reg = (opcode & RT) >> 16;
if ((unsigned long)vaddr & 3) {
@@ -443,9 +464,9 @@
preempt_disable();
if (ll_bit == 0 || ll_task != current) {
+ compute_return_epc(regs);
regs->regs[reg] = 0;
preempt_enable();
- compute_return_epc(regs);
return;
}
@@ -456,9 +477,9 @@
goto sig;
}
+ compute_return_epc(regs);
regs->regs[reg] = 1;
- compute_return_epc(regs);
return;
sig:
@@ -491,6 +512,37 @@
return -EFAULT; /* Strange things going on ... */
}
+/*
+ * Simulate trapping 'rdhwr' instructions to provide user accessible
+ * registers not implemented in hardware. The only current use of this
+ * is the thread area pointer.
+ */
+static inline int simulate_rdhwr(struct pt_regs *regs)
+{
+ struct thread_info *ti = current->thread_info;
+ unsigned int opcode;
+
+ if (unlikely(get_insn_opcode(regs, &opcode)))
+ return -EFAULT;
+
+ if (unlikely(compute_return_epc(regs)))
+ return -EFAULT;
+
+ if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) {
+ int rd = (opcode & RD) >> 11;
+ int rt = (opcode & RT) >> 16;
+ switch (rd) {
+ case 29:
+ regs->regs[rt] = ti->tp_value;
+ break;
+ default:
+ return -EFAULT;
+ }
+ }
+
+ return 0;
+}
+
asmlinkage void do_ov(struct pt_regs *regs)
{
siginfo_t info;
@@ -498,7 +550,7 @@
info.si_code = FPE_INTOVF;
info.si_signo = SIGFPE;
info.si_errno = 0;
- info.si_addr = (void *)regs->cp0_epc;
+ info.si_addr = (void __user *) regs->cp0_epc;
force_sig_info(SIGFPE, &info, current);
}
@@ -512,6 +564,14 @@
preempt_disable();
+#ifdef CONFIG_PREEMPT
+ if (!is_fpu_owner()) {
+ /* We might lose fpu before disabling preempt... */
+ own_fpu();
+ BUG_ON(!used_math());
+ restore_fp(current);
+ }
+#endif
/*
* Unimplemented operation exception. If we've got the full
* software emulator on-board, let's use it...
@@ -523,11 +583,18 @@
* a bit extreme for what should be an infrequent event.
*/
save_fp(current);
+ /* Ensure 'resume' not overwrite saved fp context again. */
+ lose_fpu();
+
+ preempt_enable();
/* Run the emulator */
- sig = fpu_emulator_cop1Handler (0, regs,
+ sig = fpu_emulator_cop1Handler (regs,
¤t->thread.fpu.soft);
+ preempt_disable();
+
+ own_fpu(); /* Using the FPU again. */
/*
* We can't allow the emulated instruction to leave any of
* the cause bit set in $fcr31.
@@ -584,7 +651,7 @@
info.si_code = FPE_INTOVF;
info.si_signo = SIGFPE;
info.si_errno = 0;
- info.si_addr = (void *)regs->cp0_epc;
+ info.si_addr = (void __user *) regs->cp0_epc;
force_sig_info(SIGFPE, &info, current);
break;
default:
@@ -621,7 +688,7 @@
info.si_code = FPE_INTOVF;
info.si_signo = SIGFPE;
info.si_errno = 0;
- info.si_addr = (void *)regs->cp0_epc;
+ info.si_addr = (void __user *) regs->cp0_epc;
force_sig_info(SIGFPE, &info, current);
break;
default:
@@ -637,6 +704,9 @@
if (!simulate_llsc(regs))
return;
+ if (!simulate_rdhwr(regs))
+ return;
+
force_sig(SIGILL, current);
}
@@ -650,11 +720,13 @@
switch (cpid) {
case 0:
- if (cpu_has_llsc)
- break;
+ if (!cpu_has_llsc)
+ if (!simulate_llsc(regs))
+ return;
- if (!simulate_llsc(regs))
+ if (!simulate_rdhwr(regs))
return;
+
break;
case 1:
@@ -668,15 +740,15 @@
set_used_math();
}
+ preempt_enable();
+
if (!cpu_has_fpu) {
- int sig = fpu_emulator_cop1Handler(0, regs,
+ int sig = fpu_emulator_cop1Handler(regs,
¤t->thread.fpu.soft);
if (sig)
force_sig(sig, current);
}
- preempt_enable();
-
return;
case 2:
@@ -716,6 +788,22 @@
(regs->cp0_status & ST0_TS) ? "" : "not ");
}
+asmlinkage void do_mt(struct pt_regs *regs)
+{
+ die_if_kernel("MIPS MT Thread exception in kernel", regs);
+
+ force_sig(SIGILL, current);
+}
+
+
+asmlinkage void do_dsp(struct pt_regs *regs)
+{
+ if (cpu_has_dsp)
+ panic("Unexpected DSP exception\n");
+
+ force_sig(SIGILL, current);
+}
+
asmlinkage void do_reserved(struct pt_regs *regs)
{
/*
@@ -728,6 +816,12 @@
(regs->cp0_cause & 0x7f) >> 2);
}
+asmlinkage void do_default_vi(struct pt_regs *regs)
+{
+ show_regs(regs);
+ panic("Caught unexpected vectored interrupt.");
+}
+
/*
* Some MIPS CPUs can enable/disable for cache parity detection, but do
* it different ways.
@@ -736,16 +830,12 @@
{
switch (current_cpu_data.cputype) {
case CPU_24K:
- /* 24K cache parity not currently implemented in FPGA */
- printk(KERN_INFO "Disable cache parity protection for "
- "MIPS 24K CPU.\n");
- write_c0_ecc(read_c0_ecc() & ~0x80000000);
- break;
case CPU_5KC:
- /* Set the PE bit (bit 31) in the c0_ecc register. */
- printk(KERN_INFO "Enable cache parity protection for "
- "MIPS 5KC/24K CPUs.\n");
- write_c0_ecc(read_c0_ecc() | 0x80000000);
+ write_c0_ecc(0x80000000);
+ back_to_back_c0_hazard();
+ /* Set the PE bit (bit 31) in the c0_errctl register. */
+ printk(KERN_INFO "Cache parity protection %sabled\n",
+ (read_c0_ecc() & 0x80000000) ? "en" : "dis");
break;
case CPU_20KC:
case CPU_25KF:
@@ -783,7 +873,7 @@
reg_val & (1<<22) ? "E0 " : "");
printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
-#if defined(CONFIG_CPU_MIPS32) || defined (CONFIG_CPU_MIPS64)
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
if (reg_val & (1<<22))
printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
@@ -840,7 +930,11 @@
while(1) ;
}
+#define VECTORSPACING 0x100 /* for EI/VI mode */
+
+unsigned long ebase;
unsigned long exception_handlers[32];
+unsigned long vi_handlers[64];
/*
* As a side effect of the way this is implemented we're limited
@@ -854,13 +948,156 @@
exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
- *(volatile u32 *)(CAC_BASE + 0x200) = 0x08000000 |
+ *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
(0x03ffffff & (handler >> 2));
- flush_icache_range(CAC_BASE + 0x200, CAC_BASE + 0x204);
+ flush_icache_range(ebase + 0x200, ebase + 0x204);
}
return (void *)old_handler;
}
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Shadow register allocation
+ * FIXME: SMP...
+ */
+
+/* MIPSR2 shadow register sets */
+struct shadow_registers {
+ spinlock_t sr_lock; /* */
+ int sr_supported; /* Number of shadow register sets supported */
+ int sr_allocated; /* Bitmap of allocated shadow registers */
+} shadow_registers;
+
+void mips_srs_init(void)
+{
+#ifdef CONFIG_CPU_MIPSR2_SRS
+ shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+ printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported);
+#else
+ shadow_registers.sr_supported = 1;
+#endif
+ shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */
+ spin_lock_init(&shadow_registers.sr_lock);
+}
+
+int mips_srs_max(void)
+{
+ return shadow_registers.sr_supported;
+}
+
+int mips_srs_alloc (void)
+{
+ struct shadow_registers *sr = &shadow_registers;
+ unsigned long flags;
+ int set;
+
+ spin_lock_irqsave(&sr->sr_lock, flags);
+
+ for (set = 0; set < sr->sr_supported; set++) {
+ if ((sr->sr_allocated & (1 << set)) == 0) {
+ sr->sr_allocated |= 1 << set;
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+ return set;
+ }
+ }
+
+ /* None available */
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+ return -1;
+}
+
+void mips_srs_free (int set)
+{
+ struct shadow_registers *sr = &shadow_registers;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sr->sr_lock, flags);
+ sr->sr_allocated &= ~(1 << set);
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+}
+
+void *set_vi_srs_handler (int n, void *addr, int srs)
+{
+ unsigned long handler;
+ unsigned long old_handler = vi_handlers[n];
+ u32 *w;
+ unsigned char *b;
+
+ if (!cpu_has_veic && !cpu_has_vint)
+ BUG();
+
+ if (addr == NULL) {
+ handler = (unsigned long) do_default_vi;
+ srs = 0;
+ }
+ else
+ handler = (unsigned long) addr;
+ vi_handlers[n] = (unsigned long) addr;
+
+ b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
+
+ if (srs >= mips_srs_max())
+ panic("Shadow register set %d not supported", srs);
+
+ if (cpu_has_veic) {
+ if (board_bind_eic_interrupt)
+ board_bind_eic_interrupt (n, srs);
+ }
+ else if (cpu_has_vint) {
+ /* SRSMap is only defined if shadow sets are implemented */
+ if (mips_srs_max() > 1)
+ change_c0_srsmap (0xf << n*4, srs << n*4);
+ }
+
+ if (srs == 0) {
+ /*
+ * If no shadow set is selected then use the default handler
+ * that does normal register saving and a standard interrupt exit
+ */
+
+ extern char except_vec_vi, except_vec_vi_lui;
+ extern char except_vec_vi_ori, except_vec_vi_end;
+ const int handler_len = &except_vec_vi_end - &except_vec_vi;
+ const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
+ const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+
+ if (handler_len > VECTORSPACING) {
+ /*
+ * Sigh... panicing won't help as the console
+ * is probably not configured :(
+ */
+ panic ("VECTORSPACING too small");
+ }
+
+ memcpy (b, &except_vec_vi, handler_len);
+ w = (u32 *)(b + lui_offset);
+ *w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
+ w = (u32 *)(b + ori_offset);
+ *w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
+ flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+ }
+ else {
+ /*
+ * In other cases jump directly to the interrupt handler
+ *
+ * It is the handlers responsibility to save registers if required
+ * (eg hi/lo) and return from the exception using "eret"
+ */
+ w = (u32 *)b;
+ *w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
+ *w = 0;
+ flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+ }
+
+ return (void *)old_handler;
+}
+
+void *set_vi_handler (int n, void *addr)
+{
+ return set_vi_srs_handler (n, addr, 0);
+}
+#endif
+
/*
* This is used by native signal handling
*/
@@ -912,6 +1149,7 @@
extern void cpu_cache_init(void);
extern void tlb_init(void);
+extern void flush_tlb_handlers(void);
void __init per_cpu_trap_init(void)
{
@@ -929,15 +1167,32 @@
#endif
if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
status_set |= ST0_XX;
- change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+ change_c0_status(ST0_CU|ST0_MX|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
status_set);
+ if (cpu_has_dsp)
+ set_c0_status(ST0_MX);
+
+#ifdef CONFIG_CPU_MIPSR2
+ write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
+#endif
+
/*
- * Some MIPS CPUs have a dedicated interrupt vector which reduces the
- * interrupt processing overhead. Use it where available.
+ * Interrupt handling.
*/
- if (cpu_has_divec)
- set_c0_cause(CAUSEF_IV);
+ if (cpu_has_veic || cpu_has_vint) {
+ write_c0_ebase (ebase);
+ /* Setting vector spacing enables EI/VI mode */
+ change_c0_intctl (0x3e0, VECTORSPACING);
+ }
+ if (cpu_has_divec) {
+ if (cpu_has_mipsmt) {
+ unsigned int vpflags = dvpe();
+ set_c0_cause(CAUSEF_IV);
+ evpe(vpflags);
+ } else
+ set_c0_cause(CAUSEF_IV);
+ }
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
TLBMISS_HANDLER_SETUP();
@@ -951,13 +1206,41 @@
tlb_init();
}
+/* Install CPU exception handler */
+void __init set_handler (unsigned long offset, void *addr, unsigned long size)
+{
+ memcpy((void *)(ebase + offset), addr, size);
+ flush_icache_range(ebase + offset, ebase + offset + size);
+}
+
+/* Install uncached CPU exception handler */
+void __init set_uncached_handler (unsigned long offset, void *addr, unsigned long size)
+{
+#ifdef CONFIG_32BIT
+ unsigned long uncached_ebase = KSEG1ADDR(ebase);
+#endif
+#ifdef CONFIG_64BIT
+ unsigned long uncached_ebase = TO_UNCAC(ebase);
+#endif
+
+ memcpy((void *)(uncached_ebase + offset), addr, size);
+}
+
void __init trap_init(void)
{
extern char except_vec3_generic, except_vec3_r4000;
- extern char except_vec_ejtag_debug;
extern char except_vec4;
unsigned long i;
+ if (cpu_has_veic || cpu_has_vint)
+ ebase = (unsigned long) alloc_bootmem_low_pages (0x200 + VECTORSPACING*64);
+ else
+ ebase = CAC_BASE;
+
+#ifdef CONFIG_CPU_MIPSR2
+ mips_srs_init();
+#endif
+
per_cpu_trap_init();
/*
@@ -965,7 +1248,7 @@
* This will be overriden later as suitable for a particular
* configuration.
*/
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+ set_handler(0x180, &except_vec3_generic, 0x80);
/*
* Setup default vectors
@@ -977,8 +1260,8 @@
* Copy the EJTAG debug exception vector handler code to it's final
* destination.
*/
- if (cpu_has_ejtag)
- memcpy((void *)(CAC_BASE + 0x300), &except_vec_ejtag_debug, 0x80);
+ if (cpu_has_ejtag && board_ejtag_handler_setup)
+ board_ejtag_handler_setup ();
/*
* Only some CPUs have the watch exceptions.
@@ -987,11 +1270,15 @@
set_except_vector(23, handle_watch);
/*
- * Some MIPS CPUs have a dedicated interrupt vector which reduces the
- * interrupt processing overhead. Use it where available.
+ * Initialise interrupt handlers
*/
- if (cpu_has_divec)
- memcpy((void *)(CAC_BASE + 0x200), &except_vec4, 0x8);
+ if (cpu_has_veic || cpu_has_vint) {
+ int nvec = cpu_has_veic ? 64 : 8;
+ for (i = 0; i < nvec; i++)
+ set_vi_handler (i, NULL);
+ }
+ else if (cpu_has_divec)
+ set_handler(0x200, &except_vec4, 0x8);
/*
* Some CPUs can enable/disable for cache parity detection, but does
@@ -1023,21 +1310,6 @@
set_except_vector(11, handle_cpu);
set_except_vector(12, handle_ov);
set_except_vector(13, handle_tr);
- set_except_vector(22, handle_mdmx);
-
- if (cpu_has_fpu && !cpu_has_nofpuex)
- set_except_vector(15, handle_fpe);
-
- if (cpu_has_mcheck)
- set_except_vector(24, handle_mcheck);
-
- if (cpu_has_vce)
- /* Special exception: R4[04]00 uses also the divec space. */
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
- else if (cpu_has_4kex)
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
- else
- memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
if (current_cpu_data.cputype == CPU_R6000 ||
current_cpu_data.cputype == CPU_R6000A) {
@@ -1053,10 +1325,37 @@
//set_except_vector(15, handle_ndc);
}
+
+ if (board_nmi_handler_setup)
+ board_nmi_handler_setup();
+
+ if (cpu_has_fpu && !cpu_has_nofpuex)
+ set_except_vector(15, handle_fpe);
+
+ set_except_vector(22, handle_mdmx);
+
+ if (cpu_has_mcheck)
+ set_except_vector(24, handle_mcheck);
+
+ if (cpu_has_mipsmt)
+ set_except_vector(25, handle_mt);
+
+ if (cpu_has_dsp)
+ set_except_vector(26, handle_dsp);
+
+ if (cpu_has_vce)
+ /* Special exception: R4[04]00 uses also the divec space. */
+ memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
+ else if (cpu_has_4kex)
+ memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+ else
+ memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
+
signal_init();
#ifdef CONFIG_MIPS32_COMPAT
signal32_init();
#endif
- flush_icache_range(CAC_BASE, CAC_BASE + 0x400);
+ flush_icache_range(ebase, ebase + 0x400);
+ flush_tlb_handlers();
}
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 36c5212..5b5a373 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -94,7 +94,7 @@
#endif
static inline int emulate_load_store_insn(struct pt_regs *regs,
- void *addr, unsigned long pc,
+ void __user *addr, unsigned int __user *pc,
unsigned long **regptr, unsigned long *newvalue)
{
union mips_instruction insn;
@@ -107,7 +107,7 @@
/*
* This load never faults.
*/
- __get_user(insn.word, (unsigned int *)pc);
+ __get_user(insn.word, pc);
switch (insn.i_format.opcode) {
/*
@@ -494,8 +494,8 @@
{
unsigned long *regptr, newval;
extern int do_dsemulret(struct pt_regs *);
+ unsigned int __user *pc;
mm_segment_t seg;
- unsigned long pc;
/*
* Address errors may be deliberately induced by the FPU emulator to
@@ -515,7 +515,7 @@
if ((regs->cp0_badvaddr == regs->cp0_epc) || (regs->cp0_epc & 0x1))
goto sigbus;
- pc = exception_epc(regs);
+ pc = (unsigned int __user *) exception_epc(regs);
if ((current->thread.mflags & MF_FIXADE) == 0)
goto sigbus;
@@ -526,7 +526,7 @@
seg = get_fs();
if (!user_mode(regs))
set_fs(KERNEL_DS);
- if (!emulate_load_store_insn(regs, (void *)regs->cp0_badvaddr, pc,
+ if (!emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc,
®ptr, &newval)) {
compute_return_epc(regs);
/*
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 482ac31..25cc856 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -54,13 +54,6 @@
*(.data)
- /* Align the initial ramdisk image (INITRD) on page boundaries. */
- . = ALIGN(4096);
- __rd_start = .;
- *(.initrd)
- . = ALIGN(4096);
- __rd_end = .;
-
CONSTRUCTORS
}
_gp = . + 0x8000;
@@ -96,12 +89,6 @@
.init.setup : { *(.init.setup) }
__setup_end = .;
- .early_initcall.init : {
- __earlyinitcall_start = .;
- *(.initcall.early1.init)
- }
- __earlyinitcall_end = .;
-
__initcall_start = .;
.initcall.init : {
*(.initcall1.init)
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
new file mode 100644
index 0000000..97fefcc
--- /dev/null
+++ b/arch/mips/kernel/vpe.c
@@ -0,0 +1,1296 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * VPE support module
+ *
+ * Provides support for loading a MIPS SP program on VPE1.
+ * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
+ * (or partially linked). You should initialise your stack in the startup
+ * code. This loader looks for the symbol __start and sets up
+ * execution to resume from there. The MIPS SDE kit contains suitable examples.
+ *
+ * To load and run, simply cat a SP 'program file' to /dev/vpe1.
+ * i.e cat spapp >/dev/vpe1.
+ *
+ * You'll need to have the following device files.
+ * mknod /dev/vpe0 c 63 0
+ * mknod /dev/vpe1 c 63 1
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/bootmem.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+
+typedef void *vpe_handle;
+
+// defined here because the kernel module loader doesn't have
+// anything to do with it.
+#define SHN_MIPS_SCOMMON 0xff03
+
+#ifndef ARCH_SHF_SMALL
+#define ARCH_SHF_SMALL 0
+#endif
+
+/* If this is set, the section belongs in the init part of the module */
+#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
+
+// temp number,
+#define VPE_MAJOR 63
+
+static char module_name[] = "vpe";
+static int major = 0;
+
+/* grab the likely amount of memory we will need. */
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+#define P_SIZE (2 * 1024 * 1024)
+#else
+/* add an overhead to the max kmalloc size for non-striped symbols/etc */
+#define P_SIZE (256 * 1024)
+#endif
+
+#define MAX_VPES 16
+
+enum vpe_state {
+ VPE_STATE_UNUSED = 0,
+ VPE_STATE_INUSE,
+ VPE_STATE_RUNNING
+};
+
+enum tc_state {
+ TC_STATE_UNUSED = 0,
+ TC_STATE_INUSE,
+ TC_STATE_RUNNING,
+ TC_STATE_DYNAMIC
+};
+
+struct vpe;
+typedef struct tc {
+ enum tc_state state;
+ int index;
+
+ /* parent VPE */
+ struct vpe *pvpe;
+
+ /* The list of TC's with this VPE */
+ struct list_head tc;
+
+ /* The global list of tc's */
+ struct list_head list;
+} tc_t;
+
+typedef struct vpe {
+ enum vpe_state state;
+
+ /* (device) minor associated with this vpe */
+ int minor;
+
+ /* elfloader stuff */
+ void *load_addr;
+ u32 len;
+ char *pbuffer;
+ u32 plen;
+
+ unsigned long __start;
+
+ /* tc's associated with this vpe */
+ struct list_head tc;
+
+ /* The list of vpe's */
+ struct list_head list;
+
+ /* shared symbol address */
+ void *shared_ptr;
+} vpe_t;
+
+struct vpecontrol_ {
+ /* Virtual processing elements */
+ struct list_head vpe_list;
+
+ /* Thread contexts */
+ struct list_head tc_list;
+} vpecontrol;
+
+static void release_progmem(void *ptr);
+static void dump_vpe(vpe_t * v);
+extern void save_gp_address(unsigned int secbase, unsigned int rel);
+
+/* get the vpe associated with this minor */
+struct vpe *get_vpe(int minor)
+{
+ struct vpe *v;
+
+ list_for_each_entry(v, &vpecontrol.vpe_list, list) {
+ if (v->minor == minor)
+ return v;
+ }
+
+ printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor);
+ return NULL;
+}
+
+/* get the vpe associated with this minor */
+struct tc *get_tc(int index)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ if (t->index == index)
+ return t;
+ }
+
+ printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index);
+
+ return NULL;
+}
+
+struct tc *get_tc_unused(void)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ if (t->state == TC_STATE_UNUSED)
+ return t;
+ }
+
+ printk(KERN_DEBUG "VPE: All TC's are in use\n");
+
+ return NULL;
+}
+
+/* allocate a vpe and associate it with this minor (or index) */
+struct vpe *alloc_vpe(int minor)
+{
+ struct vpe *v;
+
+ if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+ printk(KERN_WARNING "VPE: alloc_vpe no mem\n");
+ return NULL;
+ }
+
+ memset(v, 0, sizeof(struct vpe));
+
+ INIT_LIST_HEAD(&v->tc);
+ list_add_tail(&v->list, &vpecontrol.vpe_list);
+
+ v->minor = minor;
+ return v;
+}
+
+/* allocate a tc. At startup only tc0 is running, all other can be halted. */
+struct tc *alloc_tc(int index)
+{
+ struct tc *t;
+
+ if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
+ printk(KERN_WARNING "VPE: alloc_tc no mem\n");
+ return NULL;
+ }
+
+ memset(t, 0, sizeof(struct tc));
+
+ INIT_LIST_HEAD(&t->tc);
+ list_add_tail(&t->list, &vpecontrol.tc_list);
+
+ t->index = index;
+
+ return t;
+}
+
+/* clean up and free everything */
+void release_vpe(struct vpe *v)
+{
+ list_del(&v->list);
+ if (v->load_addr)
+ release_progmem(v);
+ kfree(v);
+}
+
+void dump_mtregs(void)
+{
+ unsigned long val;
+
+ val = read_c0_config3();
+ printk("config3 0x%lx MT %ld\n", val,
+ (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
+
+ val = read_c0_mvpconf0();
+ printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
+ (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
+ val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
+
+ val = read_c0_mvpcontrol();
+ printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
+ (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
+ (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
+ (val & MVPCONTROL_EVP));
+
+ val = read_c0_vpeconf0();
+ printk("VPEConf0 0x%lx MVP %ld\n", val,
+ (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
+}
+
+/* Find some VPE program space */
+static void *alloc_progmem(u32 len)
+{
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ /* this means you must tell linux to use less memory than you physically have */
+ return (void *)((max_pfn * PAGE_SIZE) + KSEG0);
+#else
+ // simple grab some mem for now
+ return kmalloc(len, GFP_KERNEL);
+#endif
+}
+
+static void release_progmem(void *ptr)
+{
+#ifndef CONFIG_MIPS_VPE_LOADER_TOM
+ kfree(ptr);
+#endif
+}
+
+/* Update size with this section: return offset. */
+static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
+{
+ long ret;
+
+ ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
+ *size = ret + sechdr->sh_size;
+ return ret;
+}
+
+/* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
+ might -- code, read-only data, read-write data, small data. Tally
+ sizes, and place the offsets into sh_entsize fields: high bit means it
+ belongs in init. */
+static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
+ Elf_Shdr * sechdrs, const char *secstrings)
+{
+ static unsigned long const masks[][2] = {
+ /* NOTE: all executable code must be the first section
+ * in this array; otherwise modify the text_size
+ * finder in the two loops below */
+ {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
+ {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
+ {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
+ {ARCH_SHF_SMALL | SHF_ALLOC, 0}
+ };
+ unsigned int m, i;
+
+ for (i = 0; i < hdr->e_shnum; i++)
+ sechdrs[i].sh_entsize = ~0UL;
+
+ for (m = 0; m < ARRAY_SIZE(masks); ++m) {
+ for (i = 0; i < hdr->e_shnum; ++i) {
+ Elf_Shdr *s = &sechdrs[i];
+
+ // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
+ if ((s->sh_flags & masks[m][0]) != masks[m][0]
+ || (s->sh_flags & masks[m][1])
+ || s->sh_entsize != ~0UL)
+ continue;
+ s->sh_entsize = get_offset(&mod->core_size, s);
+ }
+
+ if (m == 0)
+ mod->core_text_size = mod->core_size;
+
+ }
+}
+
+
+/* from module-elf32.c, but subverted a little */
+
+struct mips_hi16 {
+ struct mips_hi16 *next;
+ Elf32_Addr *addr;
+ Elf32_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+static unsigned int gp_offs, gp_addr;
+
+static int apply_r_mips_none(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ return 0;
+}
+
+static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ int rel;
+
+ if( !(*location & 0xffff) ) {
+ rel = (int)v - gp_addr;
+ }
+ else {
+ /* .sbss + gp(relative) + offset */
+ /* kludge! */
+ rel = (int)(short)((int)v + gp_offs +
+ (int)(short)(*location & 0xffff) - gp_addr);
+ }
+
+ if( (rel > 32768) || (rel < -32768) ) {
+ printk(KERN_ERR
+ "apply_r_mips_gprel16: relative address out of range 0x%x %d\n",
+ rel, rel);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & 0xffff0000) | (rel & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_pc16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ int rel;
+ rel = (((unsigned int)v - (unsigned int)location));
+ rel >>= 2; // because the offset is in _instructions_ not bytes.
+ rel -= 1; // and one instruction less due to the branch delay slot.
+
+ if( (rel > 32768) || (rel < -32768) ) {
+ printk(KERN_ERR
+ "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & 0xffff0000) | (rel & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_32(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ *location += v;
+
+ return 0;
+}
+
+static int apply_r_mips_26(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ if (v % 4) {
+ printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name);
+ return -ENOEXEC;
+ }
+
+/* Not desperately convinced this is a good check of an overflow condition
+ anyway. But it gets in the way of handling undefined weak symbols which
+ we want to set to zero.
+ if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ printk(KERN_ERR
+ "module %s: relocation overflow\n",
+ me->name);
+ return -ENOEXEC;
+ }
+*/
+
+ *location = (*location & ~0x03ffffff) |
+ ((*location + (v >> 2)) & 0x03ffffff);
+ return 0;
+}
+
+static int apply_r_mips_hi16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ struct mips_hi16 *n;
+
+ /*
+ * We cannot relocate this one now because we don't know the value of
+ * the carry we need to add. Save the information, and let LO16 do the
+ * actual relocation.
+ */
+ n = kmalloc(sizeof *n, GFP_KERNEL);
+ if (!n)
+ return -ENOMEM;
+
+ n->addr = location;
+ n->value = v;
+ n->next = mips_hi16_list;
+ mips_hi16_list = n;
+
+ return 0;
+}
+
+static int apply_r_mips_lo16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ unsigned long insnlo = *location;
+ Elf32_Addr val, vallo;
+
+ /* Sign extend the addend we extract from the lo insn. */
+ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+ if (mips_hi16_list != NULL) {
+ struct mips_hi16 *l;
+
+ l = mips_hi16_list;
+ while (l != NULL) {
+ struct mips_hi16 *next;
+ unsigned long insn;
+
+ /*
+ * The value for the HI16 had best be the same.
+ */
+ if (v != l->value) {
+ printk("%d != %d\n", v, l->value);
+ goto out_danger;
+ }
+
+
+ /*
+ * Do the HI16 relocation. Note that we actually don't
+ * need to know anything about the LO16 itself, except
+ * where to find the low 16 bits of the addend needed
+ * by the LO16.
+ */
+ insn = *l->addr;
+ val = ((insn & 0xffff) << 16) + vallo;
+ val += v;
+
+ /*
+ * Account for the sign extension that will happen in
+ * the low bits.
+ */
+ val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+ insn = (insn & ~0xffff) | val;
+ *l->addr = insn;
+
+ next = l->next;
+ kfree(l);
+ l = next;
+ }
+
+ mips_hi16_list = NULL;
+ }
+
+ /*
+ * Ok, we're done with the HI16 relocs. Now deal with the LO16.
+ */
+ val = v + vallo;
+ insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+ *location = insnlo;
+
+ return 0;
+
+out_danger:
+ printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+ return -ENOEXEC;
+}
+
+static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
+ Elf32_Addr v) = {
+ [R_MIPS_NONE] = apply_r_mips_none,
+ [R_MIPS_32] = apply_r_mips_32,
+ [R_MIPS_26] = apply_r_mips_26,
+ [R_MIPS_HI16] = apply_r_mips_hi16,
+ [R_MIPS_LO16] = apply_r_mips_lo16,
+ [R_MIPS_GPREL16] = apply_r_mips_gprel16,
+ [R_MIPS_PC16] = apply_r_mips_pc16
+};
+
+
+int apply_relocations(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+ unsigned int i;
+ Elf32_Addr v;
+ int res;
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ Elf32_Word r_info = rel[i].r_info;
+
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(r_info);
+
+ if (!sym->st_value) {
+ printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
+ me->name, strtab + sym->st_name);
+ /* just print the warning, dont barf */
+ }
+
+ v = sym->st_value;
+
+ res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
+ if( res ) {
+ printk(KERN_DEBUG
+ "relocation error 0x%x sym refer <%s> value 0x%x "
+ "type 0x%x r_info 0x%x\n",
+ (unsigned int)location, strtab + sym->st_name, v,
+ r_info, ELF32_R_TYPE(r_info));
+ }
+
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+void save_gp_address(unsigned int secbase, unsigned int rel)
+{
+ gp_addr = secbase + rel;
+ gp_offs = gp_addr - (secbase & 0xffff0000);
+}
+/* end module-elf32.c */
+
+
+
+/* Change all symbols so that sh_value encodes the pointer directly. */
+static int simplify_symbols(Elf_Shdr * sechdrs,
+ unsigned int symindex,
+ const char *strtab,
+ const char *secstrings,
+ unsigned int nsecs, struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned long secbase, bssbase = 0;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+ int ret = 0, size;
+
+ /* find the .bss section for COMMON symbols */
+ for (i = 0; i < nsecs; i++) {
+ if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0)
+ bssbase = sechdrs[i].sh_addr;
+ }
+
+ for (i = 1; i < n; i++) {
+ switch (sym[i].st_shndx) {
+ case SHN_COMMON:
+ /* Allocate space for the symbol in the .bss section. st_value is currently size.
+ We want it to have the address of the symbol. */
+
+ size = sym[i].st_value;
+ sym[i].st_value = bssbase;
+
+ bssbase += size;
+ break;
+
+ case SHN_ABS:
+ /* Don't need to do anything */
+ break;
+
+ case SHN_UNDEF:
+ /* ret = -ENOENT; */
+ break;
+
+ case SHN_MIPS_SCOMMON:
+
+ printk(KERN_DEBUG
+ "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
+ strtab + sym[i].st_name, sym[i].st_shndx);
+
+ // .sbss section
+ break;
+
+ default:
+ secbase = sechdrs[sym[i].st_shndx].sh_addr;
+
+ if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
+ save_gp_address(secbase, sym[i].st_value);
+ }
+
+ sym[i].st_value += secbase;
+ break;
+ }
+
+ }
+
+ return ret;
+}
+
+#ifdef DEBUG_ELFLOADER
+static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
+ const char *strtab, struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+ printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
+ for (i = 1; i < n; i++) {
+ printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
+ strtab + sym[i].st_name, sym[i].st_value);
+ }
+}
+#endif
+
+static void dump_tc(struct tc *t)
+{
+ printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n",
+ t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt());
+ printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+}
+
+static void dump_tclist(void)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ dump_tc(t);
+ }
+}
+
+/* We are prepared so configure and start the VPE... */
+int vpe_run(vpe_t * v)
+{
+ unsigned long val;
+ struct tc *t;
+
+ /* check we are the Master VPE */
+ val = read_c0_vpeconf0();
+ if (!(val & VPECONF0_MVP)) {
+ printk(KERN_WARNING
+ "VPE: only Master VPE's are allowed to configure MT\n");
+ return -1;
+ }
+
+ /* disable MT (using dvpe) */
+ dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ if (!list_empty(&v->tc)) {
+ if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+ printk(KERN_WARNING "VPE: TC %d is already in use.\n",
+ t->index);
+ return -ENOEXEC;
+ }
+ } else {
+ printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n",
+ v->minor);
+ return -ENOEXEC;
+ }
+
+ settc(t->index);
+
+ val = read_vpe_c0_vpeconf0();
+
+ /* should check it is halted, and not activated */
+ if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
+ printk(KERN_WARNING "VPE: TC %d is already doing something!\n",
+ t->index);
+
+ dump_tclist();
+ return -ENOEXEC;
+ }
+
+ /* Write the address we want it to start running from in the TCPC register. */
+ write_tc_c0_tcrestart((unsigned long)v->__start);
+
+ /* write the sivc_info address to tccontext */
+ write_tc_c0_tccontext((unsigned long)0);
+
+ /* Set up the XTC bit in vpeconf0 to point at our tc */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT));
+
+ /* mark the TC as activated, not interrupt exempt and not dynamically allocatable */
+ val = read_tc_c0_tcstatus();
+ val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
+ write_tc_c0_tcstatus(val);
+
+ write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+
+ /* set up VPE1 */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); // no multiple TC's
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); // enable this VPE
+
+ /*
+ * The sde-kit passes 'memsize' to __start in $a3, so set something
+ * here...
+ * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and
+ * DFLT_HEAP_SIZE when you compile your program
+ */
+
+ mttgpr(7, 0);
+
+ /* set config to be the same as vpe0, particularly kseg0 coherency alg */
+ write_vpe_c0_config(read_c0_config());
+
+ /* clear out any left overs from a previous program */
+ write_vpe_c0_cause(0);
+
+ /* take system out of configuration state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */
+ write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL));
+
+ /* set it running */
+ evpe(EVPE_ENABLE);
+
+ return 0;
+}
+
+static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs,
+ unsigned int symindex, const char *strtab,
+ struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+ for (i = 1; i < n; i++) {
+ if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
+ v->__start = sym[i].st_value;
+ }
+
+ if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
+ v->shared_ptr = (void *)sym[i].st_value;
+ }
+ }
+
+ return 0;
+}
+
+/* Allocates a VPE with some program code space(the load address), copies the contents
+ of the program (p)buffer performing relocatations/etc, free's it when finished.
+*/
+int vpe_elfload(vpe_t * v)
+{
+ Elf_Ehdr *hdr;
+ Elf_Shdr *sechdrs;
+ long err = 0;
+ char *secstrings, *strtab = NULL;
+ unsigned int len, i, symindex = 0, strindex = 0;
+
+ struct module mod; // so we can re-use the relocations code
+
+ memset(&mod, 0, sizeof(struct module));
+ strcpy(mod.name, "VPE dummy prog module");
+
+ hdr = (Elf_Ehdr *) v->pbuffer;
+ len = v->plen;
+
+ /* Sanity checks against insmoding binaries or wrong arch,
+ weird elf version */
+ if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ || hdr->e_type != ET_REL || !elf_check_arch(hdr)
+ || hdr->e_shentsize != sizeof(*sechdrs)) {
+ printk(KERN_WARNING
+ "VPE program, wrong arch or weird elf version\n");
+
+ return -ENOEXEC;
+ }
+
+ if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
+ printk(KERN_ERR "VPE program length %u truncated\n", len);
+ return -ENOEXEC;
+ }
+
+ /* Convenience variables */
+ sechdrs = (void *)hdr + hdr->e_shoff;
+ secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+ sechdrs[0].sh_addr = 0;
+
+ /* And these should exist, but gcc whinges if we don't init them */
+ symindex = strindex = 0;
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+
+ if (sechdrs[i].sh_type != SHT_NOBITS
+ && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
+ printk(KERN_ERR "VPE program length %u truncated\n",
+ len);
+ return -ENOEXEC;
+ }
+
+ /* Mark all sections sh_addr with their address in the
+ temporary image. */
+ sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+
+ /* Internal symbols and strings. */
+ if (sechdrs[i].sh_type == SHT_SYMTAB) {
+ symindex = i;
+ strindex = sechdrs[i].sh_link;
+ strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+ }
+ }
+
+ layout_sections(&mod, hdr, sechdrs, secstrings);
+
+ v->load_addr = alloc_progmem(mod.core_size);
+ memset(v->load_addr, 0, mod.core_size);
+
+ printk("VPE elf_loader: loading to %p\n", v->load_addr);
+
+ for (i = 0; i < hdr->e_shnum; i++) {
+ void *dest;
+
+ if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+ continue;
+
+ dest = v->load_addr + sechdrs[i].sh_entsize;
+
+ if (sechdrs[i].sh_type != SHT_NOBITS)
+ memcpy(dest, (void *)sechdrs[i].sh_addr,
+ sechdrs[i].sh_size);
+ /* Update sh_addr to point to copy in image. */
+ sechdrs[i].sh_addr = (unsigned long)dest;
+ }
+
+ /* Fix up syms, so that st_value is a pointer to location. */
+ err =
+ simplify_symbols(sechdrs, symindex, strtab, secstrings,
+ hdr->e_shnum, &mod);
+ if (err < 0) {
+ printk(KERN_WARNING "VPE: unable to simplify symbols\n");
+ goto cleanup;
+ }
+
+ /* Now do relocations. */
+ for (i = 1; i < hdr->e_shnum; i++) {
+ const char *strtab = (char *)sechdrs[strindex].sh_addr;
+ unsigned int info = sechdrs[i].sh_info;
+
+ /* Not a valid relocation section? */
+ if (info >= hdr->e_shnum)
+ continue;
+
+ /* Don't bother with non-allocated sections */
+ if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+ continue;
+
+ if (sechdrs[i].sh_type == SHT_REL)
+ err =
+ apply_relocations(sechdrs, strtab, symindex, i, &mod);
+ else if (sechdrs[i].sh_type == SHT_RELA)
+ err = apply_relocate_add(sechdrs, strtab, symindex, i,
+ &mod);
+ if (err < 0) {
+ printk(KERN_WARNING
+ "vpe_elfload: error in relocations err %ld\n",
+ err);
+ goto cleanup;
+ }
+ }
+
+ /* make sure it's physically written out */
+ flush_icache_range((unsigned long)v->load_addr,
+ (unsigned long)v->load_addr + v->len);
+
+ if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
+
+ printk(KERN_WARNING
+ "VPE: program doesn't contain __start or vpe_shared symbols\n");
+ err = -ENOEXEC;
+ }
+
+ printk(" elf loaded\n");
+
+cleanup:
+ return err;
+}
+
+static void dump_vpe(vpe_t * v)
+{
+ struct tc *t;
+
+ printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
+ printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ dump_tc(t);
+ }
+}
+
+/* checks for VPE is unused and gets ready to load program */
+static int vpe_open(struct inode *inode, struct file *filp)
+{
+ int minor;
+ vpe_t *v;
+
+ /* assume only 1 device at the mo. */
+ if ((minor = MINOR(inode->i_rdev)) != 1) {
+ printk(KERN_WARNING "VPE: only vpe1 is supported\n");
+ return -ENODEV;
+ }
+
+ if ((v = get_vpe(minor)) == NULL) {
+ printk(KERN_WARNING "VPE: unable to get vpe\n");
+ return -ENODEV;
+ }
+
+ if (v->state != VPE_STATE_UNUSED) {
+ unsigned long tmp;
+ struct tc *t;
+
+ printk(KERN_WARNING "VPE: device %d already in use\n", minor);
+
+ dvpe();
+ dump_vpe(v);
+
+ printk(KERN_WARNING "VPE: re-initialising %d\n", minor);
+
+ release_progmem(v->load_addr);
+
+ t = get_tc(minor);
+ settc(minor);
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+
+ }
+
+ // allocate it so when we get write ops we know it's expected.
+ v->state = VPE_STATE_INUSE;
+
+ /* this of-course trashes what was there before... */
+ v->pbuffer = vmalloc(P_SIZE);
+ v->plen = P_SIZE;
+ v->load_addr = NULL;
+ v->len = 0;
+
+ return 0;
+}
+
+static int vpe_release(struct inode *inode, struct file *filp)
+{
+ int minor, ret = 0;
+ vpe_t *v;
+ Elf_Ehdr *hdr;
+
+ minor = MINOR(inode->i_rdev);
+ if ((v = get_vpe(minor)) == NULL)
+ return -ENODEV;
+
+ // simple case of fire and forget, so tell the VPE to run...
+
+ hdr = (Elf_Ehdr *) v->pbuffer;
+ if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+ if (vpe_elfload(v) >= 0)
+ vpe_run(v);
+ else {
+ printk(KERN_WARNING "VPE: ELF load failed.\n");
+ ret = -ENOEXEC;
+ }
+ } else {
+ printk(KERN_WARNING "VPE: only elf files are supported\n");
+ ret = -ENOEXEC;
+ }
+
+ // cleanup any temp buffers
+ if (v->pbuffer)
+ vfree(v->pbuffer);
+ v->plen = 0;
+ return ret;
+}
+
+static ssize_t vpe_write(struct file *file, const char __user * buffer,
+ size_t count, loff_t * ppos)
+{
+ int minor;
+ size_t ret = count;
+ vpe_t *v;
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ if ((v = get_vpe(minor)) == NULL)
+ return -ENODEV;
+
+ if (v->pbuffer == NULL) {
+ printk(KERN_ERR "vpe_write: no pbuffer\n");
+ return -ENOMEM;
+ }
+
+ if ((count + v->len) > v->plen) {
+ printk(KERN_WARNING
+ "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n");
+ return -ENOMEM;
+ }
+
+ count -= copy_from_user(v->pbuffer + v->len, buffer, count);
+ if (!count) {
+ printk("vpe_write: copy_to_user failed\n");
+ return -EFAULT;
+ }
+
+ v->len += count;
+ return ret;
+}
+
+static struct file_operations vpe_fops = {
+ .owner = THIS_MODULE,
+ .open = vpe_open,
+ .release = vpe_release,
+ .write = vpe_write
+};
+
+/* module wrapper entry points */
+/* give me a vpe */
+vpe_handle vpe_alloc(void)
+{
+ int i;
+ struct vpe *v;
+
+ /* find a vpe */
+ for (i = 1; i < MAX_VPES; i++) {
+ if ((v = get_vpe(i)) != NULL) {
+ v->state = VPE_STATE_INUSE;
+ return v;
+ }
+ }
+ return NULL;
+}
+
+EXPORT_SYMBOL(vpe_alloc);
+
+/* start running from here */
+int vpe_start(vpe_handle vpe, unsigned long start)
+{
+ struct vpe *v = vpe;
+
+ v->__start = start;
+ return vpe_run(v);
+}
+
+EXPORT_SYMBOL(vpe_start);
+
+/* halt it for now */
+int vpe_stop(vpe_handle vpe)
+{
+ struct vpe *v = vpe;
+ struct tc *t;
+ unsigned int evpe_flags;
+
+ evpe_flags = dvpe();
+
+ if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
+
+ settc(t->index);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+ }
+
+ evpe(evpe_flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(vpe_stop);
+
+/* I've done with it thank you */
+int vpe_free(vpe_handle vpe)
+{
+ struct vpe *v = vpe;
+ struct tc *t;
+ unsigned int evpe_flags;
+
+ if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+ return -ENOEXEC;
+ }
+
+ evpe_flags = dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ settc(t->index);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+
+ /* mark the TC unallocated and halt'ed */
+ write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+ write_tc_c0_tchalt(TCHALT_H);
+
+ v->state = VPE_STATE_UNUSED;
+
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ evpe(evpe_flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(vpe_free);
+
+void *vpe_get_shared(int index)
+{
+ struct vpe *v;
+
+ if ((v = get_vpe(index)) == NULL) {
+ printk(KERN_WARNING "vpe: invalid vpe index %d\n", index);
+ return NULL;
+ }
+
+ return v->shared_ptr;
+}
+
+EXPORT_SYMBOL(vpe_get_shared);
+
+static int __init vpe_module_init(void)
+{
+ struct vpe *v = NULL;
+ struct tc *t;
+ unsigned long val;
+ int i;
+
+ if (!cpu_has_mipsmt) {
+ printk("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
+
+ if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) {
+ printk("VPE loader: unable to register character device\n");
+ return -EBUSY;
+ }
+
+ if (major == 0)
+ major = VPE_MAJOR;
+
+ dmt();
+ dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ /* dump_mtregs(); */
+
+ INIT_LIST_HEAD(&vpecontrol.vpe_list);
+ INIT_LIST_HEAD(&vpecontrol.tc_list);
+
+ val = read_c0_mvpconf0();
+ for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
+ t = alloc_tc(i);
+
+ /* VPE's */
+ if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) {
+ settc(i);
+
+ if ((v = alloc_vpe(i)) == NULL) {
+ printk(KERN_WARNING "VPE: unable to allocate VPE\n");
+ return -ENODEV;
+ }
+
+ list_add(&t->tc, &v->tc); /* add the tc to the list of this vpe's tc's. */
+
+ /* deactivate all but vpe0 */
+ if (i != 0) {
+ unsigned long tmp = read_vpe_c0_vpeconf0();
+
+ tmp &= ~VPECONF0_VPA;
+
+ /* master VPE */
+ tmp |= VPECONF0_MVP;
+ write_vpe_c0_vpeconf0(tmp);
+ }
+
+ /* disable multi-threading with TC's */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+ if (i != 0) {
+ write_vpe_c0_status((read_c0_status() &
+ ~(ST0_IM | ST0_IE | ST0_KSU))
+ | ST0_CU0);
+
+ /* set config to be the same as vpe0, particularly kseg0 coherency alg */
+ write_vpe_c0_config(read_c0_config());
+ }
+
+ }
+
+ /* TC's */
+ t->pvpe = v; /* set the parent vpe */
+
+ if (i != 0) {
+ unsigned long tmp;
+
+ /* tc 0 will of course be running.... */
+ if (i == 0)
+ t->state = TC_STATE_RUNNING;
+
+ settc(i);
+
+ /* bind a TC to each VPE, May as well put all excess TC's
+ on the last VPE */
+ if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1))
+ write_tc_c0_tcbind(read_tc_c0_tcbind() |
+ ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
+ else
+ write_tc_c0_tcbind(read_tc_c0_tcbind() | i);
+
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+ }
+ }
+
+ /* release config state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+ return 0;
+}
+
+static void __exit vpe_module_exit(void)
+{
+ struct vpe *v, *n;
+
+ list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+ if (v->state != VPE_STATE_UNUSED) {
+ release_vpe(v);
+ }
+ }
+
+ unregister_chrdev(major, module_name);
+}
+
+module_init(vpe_module_init);
+module_exit(vpe_module_exit);
+MODULE_DESCRIPTION("MIPS VPE Loader");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
new file mode 100644
index 0000000..1d2ee8a
--- /dev/null
+++ b/arch/mips/lasat/Kconfig
@@ -0,0 +1,15 @@
+config PICVUE
+ tristate "PICVUE LCD display driver"
+ depends on LASAT
+
+config PICVUE_PROC
+ tristate "PICVUE LCD display driver /proc interface"
+ depends on PICVUE
+
+config DS1603
+ bool "DS1603 RTC driver"
+ depends on LASAT
+
+config LASAT_SYSCTL
+ bool "LASAT sysctl interface"
+ depends on LASAT
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index c90da16..852a419 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -71,14 +71,13 @@
}
static struct hw_interrupt_type lasat_irq_type = {
- "Lasat",
- startup_lasat_irq,
- shutdown_lasat_irq,
- enable_lasat_irq,
- disable_lasat_irq,
- mask_and_ack_lasat_irq,
- end_lasat_irq,
- NULL
+ .typename = "Lasat",
+ .startup = startup_lasat_irq,
+ .shutdown = shutdown_lasat_irq,
+ .enable = enable_lasat_irq,
+ .disable = disable_lasat_irq,
+ .ack = mask_and_ack_lasat_irq,
+ .end = end_lasat_irq,
};
static inline int ls1bit32(unsigned int x)
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index f2604fa..dcd819d 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -155,7 +155,7 @@
}
#endif
-static int __init lasat_setup(void)
+void __init plat_setup(void)
{
int i;
lasat_misc = &lasat_misc_info[mips_machtype];
@@ -185,8 +185,4 @@
change_c0_status(ST0_BEV,0);
prom_printf("Lasat specific initialization complete\n");
-
- return 0;
}
-
-early_initcall(lasat_setup);
diff --git a/arch/mips/lib-32/dump_tlb.c b/arch/mips/lib-32/dump_tlb.c
index 019ac8f..46519f4 100644
--- a/arch/mips/lib-32/dump_tlb.c
+++ b/arch/mips/lib-32/dump_tlb.c
@@ -20,16 +20,25 @@
static inline const char *msk2str(unsigned int mask)
{
switch (mask) {
- case PM_4K: return "4kb";
- case PM_16K: return "16kb";
- case PM_64K: return "64kb";
- case PM_256K: return "256kb";
+ case PM_4K:
+ return "4kb";
+ case PM_16K:
+ return "16kb";
+ case PM_64K:
+ return "64kb";
+ case PM_256K:
+ return "256kb";
#ifndef CONFIG_CPU_VR41XX
- case PM_1M: return "1Mb";
- case PM_4M: return "4Mb";
- case PM_16M: return "16Mb";
- case PM_64M: return "64Mb";
- case PM_256M: return "256Mb";
+ case PM_1M:
+ return "1Mb";
+ case PM_4M:
+ return "4Mb";
+ case PM_16M:
+ return "16Mb";
+ case PM_64M:
+ return "64Mb";
+ case PM_256M:
+ return "256Mb";
#endif
}
@@ -47,7 +56,7 @@
unsigned int pagemask, c0, c1, asid;
unsigned long long entrylo0, entrylo1;
unsigned long entryhi;
- int i;
+ int i;
asid = read_c0_entryhi() & 0xff;
@@ -58,7 +67,7 @@
tlb_read();
BARRIER();
pagemask = read_c0_pagemask();
- entryhi = read_c0_entryhi();
+ entryhi = read_c0_entryhi();
entrylo0 = read_c0_entrylo0();
entrylo1 = read_c0_entrylo1();
@@ -78,13 +87,11 @@
printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n",
(entrylo0 << 6) & PAGE_MASK, c0,
(entrylo0 & 4) ? 1 : 0,
- (entrylo0 & 2) ? 1 : 0,
- (entrylo0 & 1));
+ (entrylo0 & 2) ? 1 : 0, (entrylo0 & 1));
printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n",
(entrylo1 << 6) & PAGE_MASK, c1,
(entrylo1 & 4) ? 1 : 0,
- (entrylo1 & 2) ? 1 : 0,
- (entrylo1 & 1));
+ (entrylo1 & 2) ? 1 : 0, (entrylo1 & 1));
printk("\n");
}
}
@@ -99,7 +106,7 @@
void dump_tlb_wired(void)
{
- int wired;
+ int wired;
wired = read_c0_wired();
printk("Wired: %d", wired);
@@ -138,9 +145,10 @@
void dump_list_process(struct task_struct *t, void *address)
{
- pgd_t *page_dir, *pgd;
- pmd_t *pmd;
- pte_t *pte, page;
+ pgd_t *page_dir, *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte, page;
unsigned long addr, val;
addr = (unsigned long) address;
@@ -152,21 +160,27 @@
if (addr > KSEG0)
page_dir = pgd_offset_k(0);
- else
+ else if (t->mm) {
page_dir = pgd_offset(t->mm, 0);
- printk("page_dir == %08x\n", (unsigned int) page_dir);
+ printk("page_dir == %08x\n", (unsigned int) page_dir);
+ } else
+ printk("Current thread has no mm\n");
if (addr > KSEG0)
pgd = pgd_offset_k(addr);
- else
+ else if (t->mm) {
pgd = pgd_offset(t->mm, addr);
- printk("pgd == %08x, ", (unsigned int) pgd);
+ printk("pgd == %08x, ", (unsigned int) pgd);
+ pud = pud_offset(pgd, addr);
+ printk("pud == %08x, ", (unsigned int) pud);
- pmd = pmd_offset(pgd, addr);
- printk("pmd == %08x, ", (unsigned int) pmd);
+ pmd = pmd_offset(pud, addr);
+ printk("pmd == %08x, ", (unsigned int) pmd);
- pte = pte_offset(pmd, addr);
- printk("pte == %08x, ", (unsigned int) pte);
+ pte = pte_offset(pmd, addr);
+ printk("pte == %08x, ", (unsigned int) pte);
+ } else
+ printk("Current thread has no mm\n");
page = *pte;
#ifdef CONFIG_64BIT_PHYS_ADDR
@@ -176,14 +190,22 @@
#endif
val = pte_val(page);
- if (val & _PAGE_PRESENT) printk("present ");
- if (val & _PAGE_READ) printk("read ");
- if (val & _PAGE_WRITE) printk("write ");
- if (val & _PAGE_ACCESSED) printk("accessed ");
- if (val & _PAGE_MODIFIED) printk("modified ");
- if (val & _PAGE_R4KBUG) printk("r4kbug ");
- if (val & _PAGE_GLOBAL) printk("global ");
- if (val & _PAGE_VALID) printk("valid ");
+ if (val & _PAGE_PRESENT)
+ printk("present ");
+ if (val & _PAGE_READ)
+ printk("read ");
+ if (val & _PAGE_WRITE)
+ printk("write ");
+ if (val & _PAGE_ACCESSED)
+ printk("accessed ");
+ if (val & _PAGE_MODIFIED)
+ printk("modified ");
+ if (val & _PAGE_R4KBUG)
+ printk("r4kbug ");
+ if (val & _PAGE_GLOBAL)
+ printk("global ");
+ if (val & _PAGE_VALID)
+ printk("valid ");
printk("\n");
}
@@ -194,14 +216,16 @@
unsigned int vtop(void *address)
{
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *pte;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
unsigned int addr, paddr;
addr = (unsigned long) address;
pgd = pgd_offset(current->mm, addr);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
pte = pte_offset(pmd, addr);
paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
paddr |= (addr & ~PAGE_MASK);
@@ -214,9 +238,9 @@
int i;
for (i = 0; i < 8; i++) {
- printk("*%08lx == %08lx, ", (unsigned long)p, *p);
+ printk("*%08lx == %08lx, ", (unsigned long) p, *p);
p++;
- printk("*%08lx == %08lx\n", (unsigned long)p, *p);
+ printk("*%08lx == %08lx\n", (unsigned long) p, *p);
p++;
}
}
diff --git a/arch/mips/lib-32/r3k_dump_tlb.c b/arch/mips/lib-32/r3k_dump_tlb.c
index a878224..4f2cb74 100644
--- a/arch/mips/lib-32/r3k_dump_tlb.c
+++ b/arch/mips/lib-32/r3k_dump_tlb.c
@@ -105,6 +105,7 @@
void dump_list_process(struct task_struct *t, void *address)
{
pgd_t *page_dir, *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte, page;
unsigned int addr;
@@ -121,7 +122,10 @@
pgd = pgd_offset(t->mm, addr);
printk("pgd == %08x, ", (unsigned int) pgd);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ printk("pud == %08x, ", (unsigned int) pud);
+
+ pmd = pmd_offset(pud, addr);
printk("pmd == %08x, ", (unsigned int) pmd);
pte = pte_offset(pmd, addr);
@@ -149,13 +153,15 @@
unsigned int vtop(void *address)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
unsigned int addr, paddr;
addr = (unsigned long) address;
pgd = pgd_offset(current->mm, addr);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
pte = pte_offset(pmd, addr);
paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
paddr |= (addr & ~PAGE_MASK);
diff --git a/arch/mips/lib-64/dump_tlb.c b/arch/mips/lib-64/dump_tlb.c
index 42f88e0..11a5f01 100644
--- a/arch/mips/lib-64/dump_tlb.c
+++ b/arch/mips/lib-64/dump_tlb.c
@@ -140,6 +140,7 @@
void dump_list_process(struct task_struct *t, void *address)
{
pgd_t *page_dir, *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte, page;
unsigned long addr, val;
@@ -155,7 +156,10 @@
pgd = pgd_offset(t->mm, addr);
printk("pgd == %016lx\n", (unsigned long) pgd);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ printk("pud == %016lx\n", (unsigned long) pud);
+
+ pmd = pmd_offset(pud, addr);
printk("pmd == %016lx\n", (unsigned long) pmd);
pte = pte_offset(pmd, addr);
@@ -184,13 +188,15 @@
unsigned int vtop(void *address)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
unsigned int addr, paddr;
addr = (unsigned long) address;
pgd = pgd_offset(current->mm, addr);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
pte = pte_offset(pmd, addr);
paddr = (CKSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
paddr |= (addr & ~PAGE_MASK);
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 03730341..cf12caf 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,8 +2,8 @@
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial_copy.o memcpy.o promlib.o \
- strlen_user.o strncpy_user.o strnlen_user.o
+lib-y += csum_partial_copy.o memcpy.o promlib.o strlen_user.o strncpy_user.o \
+ strnlen_user.o uncached.o
obj-y += iomap.o
diff --git a/arch/mips/lib/csum_partial_copy.c b/arch/mips/lib/csum_partial_copy.c
index ffed0a6..6e9f366 100644
--- a/arch/mips/lib/csum_partial_copy.c
+++ b/arch/mips/lib/csum_partial_copy.c
@@ -16,8 +16,8 @@
/*
* copy while checksumming, otherwise like csum_partial
*/
-unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst,
- int len, unsigned int sum)
+unsigned int csum_partial_copy_nocheck(const unsigned char *src,
+ unsigned char *dst, int len, unsigned int sum)
{
/*
* It's 2:30 am and I don't feel like doing it real ...
@@ -33,8 +33,8 @@
* Copy from userspace and compute checksum. If we catch an exception
* then zero the rest of the buffer.
*/
-unsigned int csum_partial_copy_from_user (const unsigned char *src, unsigned char *dst,
- int len, unsigned int sum, int *err_ptr)
+unsigned int csum_partial_copy_from_user (const unsigned char __user *src,
+ unsigned char *dst, int len, unsigned int sum, int *err_ptr)
{
int missing;
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index a78865f..7f9aafa 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -13,6 +13,21 @@
* Mnemonic names for arguments to memcpy/__copy_user
*/
#include <linux/config.h>
+
+/*
+ * Hack to resolve longstanding prefetch issue
+ *
+ * Prefetching may be fatal on some systems if we're prefetching beyond the
+ * end of memory on some systems. It's also a seriously bad idea on non
+ * dma-coherent systems.
+ */
+#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c
new file mode 100644
index 0000000..98ce89f
--- /dev/null
+++ b/arch/mips/lib/uncached.c
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Thiemo Seufer
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
+ */
+
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/bug.h>
+
+#ifndef CKSEG2
+#define CKSEG2 CKSSEG
+#endif
+#ifndef TO_PHYS_MASK
+#define TO_PHYS_MASK -1
+#endif
+
+/*
+ * FUNC is executed in one of the uncached segments, depending on its
+ * original address as follows:
+ *
+ * 1. If the original address is in CKSEG0 or CKSEG1, then the uncached
+ * segment used is CKSEG1.
+ * 2. If the original address is in XKPHYS, then the uncached segment
+ * used is XKPHYS(2).
+ * 3. Otherwise it's a bug.
+ *
+ * The same remapping is done with the stack pointer. Stack handling
+ * works because we don't handle stack arguments or more complex return
+ * values, so we can avoid sharing the same stack area between a cached
+ * and the uncached mode.
+ */
+unsigned long __init run_uncached(void *func)
+{
+ register long sp __asm__("$sp");
+ register long ret __asm__("$2");
+ long lfunc = (long)func, ufunc;
+ long usp;
+
+ if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
+ usp = CKSEG1ADDR(sp);
+ else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
+ (long long)sp < (long long)PHYS_TO_XKPHYS(8LL, 0))
+ usp = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
+ XKPHYS_TO_PHYS((long long)sp));
+ else {
+ BUG();
+ usp = sp;
+ }
+ if (lfunc >= (long)CKSEG0 && lfunc < (long)CKSEG2)
+ ufunc = CKSEG1ADDR(lfunc);
+ else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
+ (long long)lfunc < (long long)PHYS_TO_XKPHYS(8LL, 0))
+ ufunc = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
+ XKPHYS_TO_PHYS((long long)lfunc));
+ else {
+ BUG();
+ ufunc = lfunc;
+ }
+
+ __asm__ __volatile__ (
+ " move $16, $sp\n"
+ " move $sp, %1\n"
+ " jalr %2\n"
+ " move $sp, $16"
+ : "=r" (ret)
+ : "r" (usp), "r" (ufunc)
+ : "$16", "$31");
+
+ return ret;
+}
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 99c5506..aa5818a 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -70,7 +70,7 @@
/* Further private data for which no space exists in mips_fpu_soft_struct */
-struct mips_fpu_emulator_private fpuemuprivate;
+struct mips_fpu_emulator_stats fpuemustats;
/* Control registers */
@@ -79,7 +79,17 @@
/* Convert Mips rounding mode (0..3) to IEEE library modes. */
static const unsigned char ieee_rm[4] = {
- IEEE754_RN, IEEE754_RZ, IEEE754_RU, IEEE754_RD
+ [FPU_CSR_RN] = IEEE754_RN,
+ [FPU_CSR_RZ] = IEEE754_RZ,
+ [FPU_CSR_RU] = IEEE754_RU,
+ [FPU_CSR_RD] = IEEE754_RD,
+};
+/* Convert IEEE library modes to Mips rounding mode (0..3). */
+static const unsigned char mips_rm[4] = {
+ [IEEE754_RN] = FPU_CSR_RN,
+ [IEEE754_RZ] = FPU_CSR_RZ,
+ [IEEE754_RD] = FPU_CSR_RD,
+ [IEEE754_RU] = FPU_CSR_RU,
};
#if __mips >= 4
@@ -196,11 +206,11 @@
static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
{
mips_instruction ir;
- vaddr_t emulpc, contpc;
+ void * emulpc, *contpc;
unsigned int cond;
- if (get_user(ir, (mips_instruction *) xcp->cp0_epc)) {
- fpuemuprivate.stats.errors++;
+ if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+ fpuemustats.errors++;
return SIGBUS;
}
@@ -221,41 +231,39 @@
* Linux MIPS branch emulator operates on context, updating the
* cp0_epc.
*/
- emulpc = REG_TO_VA(xcp->cp0_epc + 4); /* Snapshot emulation target */
+ emulpc = (void *) (xcp->cp0_epc + 4); /* Snapshot emulation target */
if (__compute_return_epc(xcp)) {
#ifdef CP1DBG
printk("failed to emulate branch at %p\n",
- REG_TO_VA(xcp->cp0_epc));
+ (void *) (xcp->cp0_epc));
#endif
return SIGILL;
}
- if (get_user(ir, (mips_instruction *) emulpc)) {
- fpuemuprivate.stats.errors++;
+ if (get_user(ir, (mips_instruction __user *) emulpc)) {
+ fpuemustats.errors++;
return SIGBUS;
}
/* __compute_return_epc() will have updated cp0_epc */
- contpc = REG_TO_VA xcp->cp0_epc;
+ contpc = (void *) xcp->cp0_epc;
/* In order not to confuse ptrace() et al, tweak context */
- xcp->cp0_epc = VA_TO_REG emulpc - 4;
- }
- else {
- emulpc = REG_TO_VA xcp->cp0_epc;
- contpc = REG_TO_VA(xcp->cp0_epc + 4);
+ xcp->cp0_epc = (unsigned long) emulpc - 4;
+ } else {
+ emulpc = (void *) xcp->cp0_epc;
+ contpc = (void *) (xcp->cp0_epc + 4);
}
emul:
- fpuemuprivate.stats.emulated++;
+ fpuemustats.emulated++;
switch (MIPSInst_OPCODE(ir)) {
-#ifndef SINGLE_ONLY_FPU
case ldc1_op:{
- u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+ u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
MIPSInst_SIMM(ir));
u64 val;
- fpuemuprivate.stats.loads++;
+ fpuemustats.loads++;
if (get_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
DITOREG(val, MIPSInst_RT(ir));
@@ -263,55 +271,42 @@
}
case sdc1_op:{
- u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+ u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
MIPSInst_SIMM(ir));
u64 val;
- fpuemuprivate.stats.stores++;
+ fpuemustats.stores++;
DIFROMREG(val, MIPSInst_RT(ir));
if (put_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
break;
}
-#endif
case lwc1_op:{
- u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+ u32 __user *va = (u32 __user *) (xcp->regs[MIPSInst_RS(ir)] +
MIPSInst_SIMM(ir));
u32 val;
- fpuemuprivate.stats.loads++;
+ fpuemustats.loads++;
if (get_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_RT(ir) & 1) {
- /* illegal register in single-float mode */
- return SIGILL;
- }
-#endif
SITOREG(val, MIPSInst_RT(ir));
break;
}
case swc1_op:{
- u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+ u32 __user *va = (u32 __user *) (xcp->regs[MIPSInst_RS(ir)] +
MIPSInst_SIMM(ir));
u32 val;
- fpuemuprivate.stats.stores++;
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_RT(ir) & 1) {
- /* illegal register in single-float mode */
- return SIGILL;
- }
-#endif
+ fpuemustats.stores++;
SIFROMREG(val, MIPSInst_RT(ir));
if (put_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
break;
@@ -320,7 +315,7 @@
case cop1_op:
switch (MIPSInst_RS(ir)) {
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case dmfc_op:
/* copregister fs -> gpr[rt] */
if (MIPSInst_RT(ir) != 0) {
@@ -337,12 +332,6 @@
case mfc_op:
/* copregister rd -> gpr[rt] */
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_RD(ir) & 1) {
- /* illegal register in single-float mode */
- return SIGILL;
- }
-#endif
if (MIPSInst_RT(ir) != 0) {
SIFROMREG(xcp->regs[MIPSInst_RT(ir)],
MIPSInst_RD(ir));
@@ -351,12 +340,6 @@
case mtc_op:
/* copregister rd <- rt */
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_RD(ir) & 1) {
- /* illegal register in single-float mode */
- return SIGILL;
- }
-#endif
SITOREG(xcp->regs[MIPSInst_RT(ir)], MIPSInst_RD(ir));
break;
@@ -369,9 +352,10 @@
}
if (MIPSInst_RD(ir) == FPCREG_CSR) {
value = ctx->fcr31;
+ value = (value & ~0x3) | mips_rm[value & 0x3];
#ifdef CSRTRACE
printk("%p gpr[%d]<-csr=%08x\n",
- REG_TO_VA(xcp->cp0_epc),
+ (void *) (xcp->cp0_epc),
MIPSInst_RT(ir), value);
#endif
}
@@ -398,14 +382,13 @@
if (MIPSInst_RD(ir) == FPCREG_CSR) {
#ifdef CSRTRACE
printk("%p gpr[%d]->csr=%08x\n",
- REG_TO_VA(xcp->cp0_epc),
+ (void *) (xcp->cp0_epc),
MIPSInst_RT(ir), value);
#endif
- ctx->fcr31 = value;
- /* copy new rounding mode and
- flush bit to ieee library state! */
- ieee754_csr.nod = (ctx->fcr31 & 0x1000000) != 0;
- ieee754_csr.rm = ieee_rm[value & 0x3];
+ value &= (FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
+ ctx->fcr31 &= ~(FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
+ /* convert to ieee library modes */
+ ctx->fcr31 |= (value & ~0x3) | ieee_rm[value & 0x3];
}
if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
return SIGFPE;
@@ -445,20 +428,20 @@
* instruction
*/
xcp->cp0_epc += 4;
- contpc = REG_TO_VA
+ contpc = (void *)
(xcp->cp0_epc +
(MIPSInst_SIMM(ir) << 2));
- if (get_user(ir, (mips_instruction *)
- REG_TO_VA xcp->cp0_epc)) {
- fpuemuprivate.stats.errors++;
+ if (get_user(ir,
+ (mips_instruction __user *) xcp->cp0_epc)) {
+ fpuemustats.errors++;
return SIGBUS;
}
switch (MIPSInst_OPCODE(ir)) {
case lwc1_op:
case swc1_op:
-#if (__mips >= 2 || __mips64) && !defined(SINGLE_ONLY_FPU)
+#if (__mips >= 2 || defined(__mips64))
case ldc1_op:
case sdc1_op:
#endif
@@ -480,7 +463,7 @@
* Single step the non-cp1
* instruction in the dslot
*/
- return mips_dsemul(xcp, ir, VA_TO_REG contpc);
+ return mips_dsemul(xcp, ir, (unsigned long) contpc);
}
else {
/* branch not taken */
@@ -539,8 +522,9 @@
}
/* we did it !! */
- xcp->cp0_epc = VA_TO_REG(contpc);
+ xcp->cp0_epc = (unsigned long) contpc;
xcp->cp0_cause &= ~CAUSEF_BD;
+
return 0;
}
@@ -570,7 +554,7 @@
static ieee754##p fpemu_##p##_##name (ieee754##p r, ieee754##p s, \
ieee754##p t) \
{ \
- struct ieee754_csr ieee754_csr_save; \
+ struct _ieee754_csr ieee754_csr_save; \
s = f1 (s, t); \
ieee754_csr_save = ieee754_csr; \
s = f2 (s, r); \
@@ -616,54 +600,38 @@
{
unsigned rcsr = 0; /* resulting csr */
- fpuemuprivate.stats.cp1xops++;
+ fpuemustats.cp1xops++;
switch (MIPSInst_FMA_FFMT(ir)) {
case s_fmt:{ /* 0 */
ieee754sp(*handler) (ieee754sp, ieee754sp, ieee754sp);
ieee754sp fd, fr, fs, ft;
- u32 *va;
+ u32 __user *va;
u32 val;
switch (MIPSInst_FUNC(ir)) {
case lwxc1_op:
- va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+ va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
xcp->regs[MIPSInst_FT(ir)]);
- fpuemuprivate.stats.loads++;
+ fpuemustats.loads++;
if (get_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_FD(ir) & 1) {
- /* illegal register in single-float
- * mode
- */
- return SIGILL;
- }
-#endif
SITOREG(val, MIPSInst_FD(ir));
break;
case swxc1_op:
- va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+ va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
xcp->regs[MIPSInst_FT(ir)]);
- fpuemuprivate.stats.stores++;
-#ifdef SINGLE_ONLY_FPU
- if (MIPSInst_FS(ir) & 1) {
- /* illegal register in single-float
- * mode
- */
- return SIGILL;
- }
-#endif
+ fpuemustats.stores++;
SIFROMREG(val, MIPSInst_FS(ir));
if (put_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
break;
@@ -699,8 +667,6 @@
rcsr |= FPU_CSR_INV_X | FPU_CSR_INV_S;
ctx->fcr31 = (ctx->fcr31 & ~FPU_CSR_ALL_X) | rcsr;
- if (ieee754_csr.nod)
- ctx->fcr31 |= 0x1000000;
if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
/*printk ("SIGFPE: fpu csr = %08x\n",
ctx->fcr31); */
@@ -715,34 +681,33 @@
break;
}
-#ifndef SINGLE_ONLY_FPU
case d_fmt:{ /* 1 */
ieee754dp(*handler) (ieee754dp, ieee754dp, ieee754dp);
ieee754dp fd, fr, fs, ft;
- u64 *va;
+ u64 __user *va;
u64 val;
switch (MIPSInst_FUNC(ir)) {
case ldxc1_op:
- va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+ va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
xcp->regs[MIPSInst_FT(ir)]);
- fpuemuprivate.stats.loads++;
+ fpuemustats.loads++;
if (get_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
DITOREG(val, MIPSInst_FD(ir));
break;
case sdxc1_op:
- va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+ va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
xcp->regs[MIPSInst_FT(ir)]);
- fpuemuprivate.stats.stores++;
+ fpuemustats.stores++;
DIFROMREG(val, MIPSInst_FS(ir));
if (put_user(val, va)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
break;
@@ -773,7 +738,6 @@
}
break;
}
-#endif
case 0x7: /* 7 */
if (MIPSInst_FUNC(ir) != pfetch_op) {
@@ -810,7 +774,7 @@
#endif
} rv; /* resulting value */
- fpuemuprivate.stats.cp1ops++;
+ fpuemustats.cp1ops++;
switch (rfmt = (MIPSInst_FFMT(ir) & 0xf)) {
case s_fmt:{ /* 0 */
union {
@@ -834,7 +798,7 @@
goto scopbop;
/* unary ops */
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
case fsqrt_op:
handler.u = ieee754sp_sqrt;
goto scopuop;
@@ -913,9 +877,6 @@
case fcvts_op:
return SIGILL; /* not defined */
case fcvtd_op:{
-#ifdef SINGLE_ONLY_FPU
- return SIGILL; /* not defined */
-#else
ieee754sp fs;
SPFROMREG(fs, MIPSInst_FS(ir));
@@ -923,7 +884,6 @@
rfmt = d_fmt;
goto copcsr;
}
-#endif
case fcvtw_op:{
ieee754sp fs;
@@ -933,7 +893,7 @@
goto copcsr;
}
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
case fround_op:
case ftrunc_op:
case fceil_op:
@@ -950,7 +910,7 @@
}
#endif /* __mips >= 2 */
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case fcvtl_op:{
ieee754sp fs;
@@ -974,7 +934,7 @@
rfmt = l_fmt;
goto copcsr;
}
-#endif /* __mips64 && !fpu(single) */
+#endif /* defined(__mips64) */
default:
if (MIPSInst_FUNC(ir) >= fcmp_op) {
@@ -1001,7 +961,6 @@
break;
}
-#ifndef SINGLE_ONLY_FPU
case d_fmt:{
union {
ieee754dp(*b) (ieee754dp, ieee754dp);
@@ -1024,7 +983,7 @@
goto dcopbop;
/* unary ops */
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
case fsqrt_op:
handler.u = ieee754dp_sqrt;
goto dcopuop;
@@ -1108,7 +1067,7 @@
goto copcsr;
}
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
case fround_op:
case ftrunc_op:
case fceil_op:
@@ -1125,7 +1084,7 @@
}
#endif
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case fcvtl_op:{
ieee754dp fs;
@@ -1149,7 +1108,7 @@
rfmt = l_fmt;
goto copcsr;
}
-#endif /* __mips >= 3 && !fpu(single) */
+#endif /* __mips >= 3 */
default:
if (MIPSInst_FUNC(ir) >= fcmp_op) {
@@ -1177,7 +1136,6 @@
}
break;
}
-#endif /* ifndef SINGLE_ONLY_FPU */
case w_fmt:{
ieee754sp fs;
@@ -1189,21 +1147,19 @@
rv.s = ieee754sp_fint(fs.bits);
rfmt = s_fmt;
goto copcsr;
-#ifndef SINGLE_ONLY_FPU
case fcvtd_op:
/* convert word to double precision real */
SPFROMREG(fs, MIPSInst_FS(ir));
rv.d = ieee754dp_fint(fs.bits);
rfmt = d_fmt;
goto copcsr;
-#endif
default:
return SIGILL;
}
break;
}
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case l_fmt:{
switch (MIPSInst_FUNC(ir)) {
case fcvts_op:
@@ -1256,18 +1212,16 @@
ctx->fcr31 &= ~cond;
break;
}
-#ifndef SINGLE_ONLY_FPU
case d_fmt:
DPTOREG(rv.d, MIPSInst_FD(ir));
break;
-#endif
case s_fmt:
SPTOREG(rv.s, MIPSInst_FD(ir));
break;
case w_fmt:
SITOREG(rv.w, MIPSInst_FD(ir));
break;
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
case l_fmt:
DITOREG(rv.l, MIPSInst_FD(ir));
break;
@@ -1279,10 +1233,10 @@
return 0;
}
-int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
+int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_soft_struct *ctx)
{
- gpreg_t oldepc, prevepc;
+ unsigned long oldepc, prevepc;
mips_instruction insn;
int sig = 0;
@@ -1290,19 +1244,24 @@
do {
prevepc = xcp->cp0_epc;
- if (get_user(insn, (mips_instruction *) xcp->cp0_epc)) {
- fpuemuprivate.stats.errors++;
+ if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+ fpuemustats.errors++;
return SIGBUS;
}
if (insn == 0)
xcp->cp0_epc += 4; /* skip nops */
else {
- /* Update ieee754_csr. Only relevant if we have a
- h/w FPU */
- ieee754_csr.nod = (ctx->fcr31 & 0x1000000) != 0;
- ieee754_csr.rm = ieee_rm[ctx->fcr31 & 0x3];
- ieee754_csr.cx = (ctx->fcr31 >> 12) & 0x1f;
+ /*
+ * The 'ieee754_csr' is an alias of
+ * ctx->fcr31. No need to copy ctx->fcr31 to
+ * ieee754_csr. But ieee754_csr.rm is ieee
+ * library modes. (not mips rounding mode)
+ */
+ /* convert to ieee library modes */
+ ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
sig = cop1Emulate(xcp, ctx);
+ /* revert to mips rounding mode */
+ ieee754_csr.rm = mips_rm[ieee754_csr.rm];
}
if (cpu_has_fpu)
diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c
index c35e871..032328c 100644
--- a/arch/mips/math-emu/dp_sqrt.c
+++ b/arch/mips/math-emu/dp_sqrt.c
@@ -37,7 +37,7 @@
ieee754dp ieee754dp_sqrt(ieee754dp x)
{
- struct ieee754_csr oldcsr;
+ struct _ieee754_csr oldcsr;
ieee754dp y, z, t;
unsigned scalx, yh;
COMPXDP;
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index aa989c2..8079f3d 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -28,9 +28,6 @@
#endif
#define __mips 4
-extern struct mips_fpu_emulator_private fpuemuprivate;
-
-
/*
* Emulate the arbritrary instruction ir at xcp->cp0_epc. Required when
* we have to emulate the instruction in a COP1 branch delay slot. Do
@@ -52,10 +49,10 @@
mips_instruction emul;
mips_instruction badinst;
mips_instruction cookie;
- gpreg_t epc;
+ unsigned long epc;
};
-int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
+int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
{
extern asmlinkage void handle_dsemulret(void);
mips_instruction *dsemul_insns;
@@ -91,7 +88,7 @@
*/
/* Ensure that the two instructions are in the same cache line */
- dsemul_insns = (mips_instruction *) REG_TO_VA ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
+ dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
fr = (struct emuframe *) dsemul_insns;
/* Verify that the stack pointer is not competely insane */
@@ -104,11 +101,11 @@
err |= __put_user(cpc, &fr->epc);
if (unlikely(err)) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return SIGBUS;
}
- regs->cp0_epc = VA_TO_REG & fr->emul;
+ regs->cp0_epc = (unsigned long) &fr->emul;
flush_cache_sigtramp((unsigned long)&fr->badinst);
@@ -118,7 +115,7 @@
int do_dsemulret(struct pt_regs *xcp)
{
struct emuframe *fr;
- gpreg_t epc;
+ unsigned long epc;
u32 insn, cookie;
int err = 0;
@@ -141,7 +138,7 @@
err |= __get_user(cookie, &fr->cookie);
if (unlikely(err || (insn != BADINST) || (cookie != BD_COOKIE))) {
- fpuemuprivate.stats.errors++;
+ fpuemustats.errors++;
return 0;
}
diff --git a/arch/mips/math-emu/dsemul.h b/arch/mips/math-emu/dsemul.h
index dbd85f9..091f0e7 100644
--- a/arch/mips/math-emu/dsemul.h
+++ b/arch/mips/math-emu/dsemul.h
@@ -1,11 +1,5 @@
-typedef long gpreg_t;
-typedef void *vaddr_t;
-
-#define REG_TO_VA (vaddr_t)
-#define VA_TO_REG (gpreg_t)
-
-int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc);
-int do_dsemulret(struct pt_regs *xcp);
+extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc);
+extern int do_dsemulret(struct pt_regs *xcp);
/* Instruction which will always cause an address error */
#define AdELOAD 0x8c000001 /* lw $0,1($0) */
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index f0a364a..a93c45d 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -31,6 +31,8 @@
#include "ieee754int.h"
+#include "ieee754sp.h"
+#include "ieee754dp.h"
#define DP_EBIAS 1023
#define DP_EMIN (-1022)
@@ -40,20 +42,6 @@
#define SP_EMIN (-126)
#define SP_EMAX 127
-/* indexed by class */
-const char *const ieee754_cname[] = {
- "Normal",
- "Zero",
- "Denormal",
- "Infinity",
- "QNaN",
- "SNaN",
-};
-
-/* the control status register
-*/
-struct ieee754_csr ieee754_csr;
-
/* special constants
*/
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index b8772f4..171f177 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -1,13 +1,8 @@
-/* single and double precision fp ops
- * missing extended precision.
-*/
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
* http://www.algor.co.uk
*
- * ########################################################################
- *
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
@@ -21,20 +16,18 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
- * ########################################################################
- */
-
-/**************************************************************************
* Nov 7, 2000
* Modification to allow integration with Linux kernel
*
* Kevin D. Kissell, kevink@mips.com and Carsten Langgard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *************************************************************************/
+ */
+#ifndef __ARCH_MIPS_MATH_EMU_IEEE754_H
+#define __ARCH_MIPS_MATH_EMU_IEEE754_H
-#ifdef __KERNEL__
-/* Going from Algorithmics to Linux native environment, add this */
+#include <asm/byteorder.h>
#include <linux/types.h>
+#include <linux/sched.h>
/*
* Not very pretty, but the Linux kernel's normal va_list definition
@@ -44,18 +37,7 @@
#include <stdarg.h>
#endif
-#else
-
-/* Note that __KERNEL__ is taken to mean Linux kernel */
-
-#if #system(OpenBSD)
-#include <machine/types.h>
-#endif
-#include <machine/endian.h>
-
-#endif /* __KERNEL__ */
-
-#if (defined(BYTE_ORDER) && BYTE_ORDER == LITTLE_ENDIAN) || defined(__MIPSEL__)
+#ifdef __LITTLE_ENDIAN
struct ieee754dp_konst {
unsigned mantlo:32;
unsigned manthi:20;
@@ -86,13 +68,14 @@
} ieee754sp;
#endif
-#if (defined(BYTE_ORDER) && BYTE_ORDER == BIG_ENDIAN) || defined(__MIPSEB__)
+#ifdef __BIG_ENDIAN
struct ieee754dp_konst {
unsigned sign:1;
unsigned bexp:11;
unsigned manthi:20;
unsigned mantlo:32;
};
+
typedef union _ieee754dp {
struct ieee754dp_konst oparts;
struct {
@@ -222,7 +205,6 @@
#define IEEE754_CLASS_INF 0x03
#define IEEE754_CLASS_SNAN 0x04
#define IEEE754_CLASS_QNAN 0x05
-extern const char *const ieee754_cname[];
/* exception numbers */
#define IEEE754_INEXACT 0x01
@@ -251,93 +233,109 @@
/* "normal" comparisons
*/
-static __inline int ieee754sp_eq(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_eq(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CEQ, 0);
}
-static __inline int ieee754sp_ne(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_ne(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y,
IEEE754_CLT | IEEE754_CGT | IEEE754_CUN, 0);
}
-static __inline int ieee754sp_lt(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_lt(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CLT, 0);
}
-static __inline int ieee754sp_le(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_le(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CLT | IEEE754_CEQ, 0);
}
-static __inline int ieee754sp_gt(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_gt(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CGT, 0);
}
-static __inline int ieee754sp_ge(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_ge(ieee754sp x, ieee754sp y)
{
return ieee754sp_cmp(x, y, IEEE754_CGT | IEEE754_CEQ, 0);
}
-static __inline int ieee754dp_eq(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_eq(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CEQ, 0);
}
-static __inline int ieee754dp_ne(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_ne(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y,
IEEE754_CLT | IEEE754_CGT | IEEE754_CUN, 0);
}
-static __inline int ieee754dp_lt(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_lt(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CLT, 0);
}
-static __inline int ieee754dp_le(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_le(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CLT | IEEE754_CEQ, 0);
}
-static __inline int ieee754dp_gt(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_gt(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CGT, 0);
}
-static __inline int ieee754dp_ge(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_ge(ieee754dp x, ieee754dp y)
{
return ieee754dp_cmp(x, y, IEEE754_CGT | IEEE754_CEQ, 0);
}
-/* like strtod
-*/
+/*
+ * Like strtod
+ */
ieee754dp ieee754dp_fstr(const char *s, char **endp);
char *ieee754dp_tstr(ieee754dp x, int prec, int fmt, int af);
-/* the control status register
-*/
-struct ieee754_csr {
- unsigned pad:13;
+/*
+ * The control status register
+ */
+struct _ieee754_csr {
+#ifdef __BIG_ENDIAN
+ unsigned pad0:7;
unsigned nod:1; /* set 1 for no denormalised numbers */
- unsigned cx:5; /* exceptions this operation */
+ unsigned c:1; /* condition */
+ unsigned pad1:5;
+ unsigned cx:6; /* exceptions this operation */
unsigned mx:5; /* exception enable mask */
unsigned sx:5; /* exceptions total */
unsigned rm:2; /* current rounding mode */
+#endif
+#ifdef __LITTLE_ENDIAN
+ unsigned rm:2; /* current rounding mode */
+ unsigned sx:5; /* exceptions total */
+ unsigned mx:5; /* exception enable mask */
+ unsigned cx:6; /* exceptions this operation */
+ unsigned pad1:5;
+ unsigned c:1; /* condition */
+ unsigned nod:1; /* set 1 for no denormalised numbers */
+ unsigned pad0:7;
+#endif
};
-extern struct ieee754_csr ieee754_csr;
+#define ieee754_csr (*(struct _ieee754_csr *)(¤t->thread.fpu.soft.fcr31))
-static __inline unsigned ieee754_getrm(void)
+static inline unsigned ieee754_getrm(void)
{
return (ieee754_csr.rm);
}
-static __inline unsigned ieee754_setrm(unsigned rm)
+static inline unsigned ieee754_setrm(unsigned rm)
{
return (ieee754_csr.rm = rm);
}
@@ -345,14 +343,14 @@
/*
* get current exceptions
*/
-static __inline unsigned ieee754_getcx(void)
+static inline unsigned ieee754_getcx(void)
{
return (ieee754_csr.cx);
}
/* test for current exception condition
*/
-static __inline int ieee754_cxtest(unsigned n)
+static inline int ieee754_cxtest(unsigned n)
{
return (ieee754_csr.cx & n);
}
@@ -360,21 +358,21 @@
/*
* get sticky exceptions
*/
-static __inline unsigned ieee754_getsx(void)
+static inline unsigned ieee754_getsx(void)
{
return (ieee754_csr.sx);
}
/* clear sticky conditions
*/
-static __inline unsigned ieee754_clrsx(void)
+static inline unsigned ieee754_clrsx(void)
{
return (ieee754_csr.sx = 0);
}
/* test for sticky exception condition
*/
-static __inline int ieee754_sxtest(unsigned n)
+static inline int ieee754_sxtest(unsigned n)
{
return (ieee754_csr.sx & n);
}
@@ -406,52 +404,34 @@
#define ieee754dp_spcvals ((const ieee754dp *)__ieee754dp_spcvals)
#define ieee754sp_spcvals ((const ieee754sp *)__ieee754sp_spcvals)
-/* return infinity with given sign
-*/
-#define ieee754dp_inf(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
-#define ieee754dp_zero(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
-#define ieee754dp_one(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
-#define ieee754dp_ten(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754dp_indef() \
- (ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
-#define ieee754dp_max(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
-#define ieee754dp_min(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
-#define ieee754dp_mind(sn) \
- (ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
-#define ieee754dp_1e31() \
- (ieee754dp_spcvals[IEEE754_SPCVAL_P1E31])
-#define ieee754dp_1e63() \
- (ieee754dp_spcvals[IEEE754_SPCVAL_P1E63])
+/*
+ * Return infinity with given sign
+ */
+#define ieee754dp_inf(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
+#define ieee754dp_zero(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
+#define ieee754dp_one(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
+#define ieee754dp_ten(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
+#define ieee754dp_indef() (ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754dp_max(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
+#define ieee754dp_min(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
+#define ieee754dp_mind(sn) (ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
+#define ieee754dp_1e31() (ieee754dp_spcvals[IEEE754_SPCVAL_P1E31])
+#define ieee754dp_1e63() (ieee754dp_spcvals[IEEE754_SPCVAL_P1E63])
-#define ieee754sp_inf(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
-#define ieee754sp_zero(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
-#define ieee754sp_one(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
-#define ieee754sp_ten(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754sp_indef() \
- (ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
-#define ieee754sp_max(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
-#define ieee754sp_min(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
-#define ieee754sp_mind(sn) \
- (ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
-#define ieee754sp_1e31() \
- (ieee754sp_spcvals[IEEE754_SPCVAL_P1E31])
-#define ieee754sp_1e63() \
- (ieee754sp_spcvals[IEEE754_SPCVAL_P1E63])
+#define ieee754sp_inf(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
+#define ieee754sp_zero(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
+#define ieee754sp_one(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
+#define ieee754sp_ten(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
+#define ieee754sp_indef() (ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754sp_max(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
+#define ieee754sp_min(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
+#define ieee754sp_mind(sn) (ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
+#define ieee754sp_1e31() (ieee754sp_spcvals[IEEE754_SPCVAL_P1E31])
+#define ieee754sp_1e63() (ieee754sp_spcvals[IEEE754_SPCVAL_P1E63])
-/* indefinite integer value
-*/
+/*
+ * Indefinite integer value
+ */
#define ieee754si_indef() INT_MAX
#ifdef LONG_LONG_MAX
#define ieee754di_indef() LONG_LONG_MAX
@@ -487,3 +467,5 @@
/* compat */
#define ieee754dp_fix(x) ieee754dp_tint(x)
#define ieee754sp_fix(x) ieee754sp_tint(x)
+
+#endif /* __ARCH_MIPS_MATH_EMU_IEEE754_H */
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index 4002f0c..d187ab7 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -27,8 +27,6 @@
#include <asm/fpu_emulator.h>
-extern struct mips_fpu_emulator_private fpuemuprivate;
-
#define SIGNALLING_NAN 0x7ff800007ff80000LL
void fpu_emulator_init_fpu(void)
@@ -65,7 +63,6 @@
&sc->sc_fpregs[i]);
}
err |= __put_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
- err |= __put_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
return err;
}
@@ -81,7 +78,6 @@
&sc->sc_fpregs[i]);
}
err |= __get_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
- err |= __get_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
return err;
}
@@ -102,7 +98,6 @@
&sc->sc_fpregs[i]);
}
err |= __put_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
- err |= __put_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
return err;
}
@@ -118,7 +113,6 @@
&sc->sc_fpregs[i]);
}
err |= __get_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
- err |= __get_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
return err;
}
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index 19d4b07..bc0ebc6 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -76,14 +76,13 @@
}
static struct hw_interrupt_type atlas_irq_type = {
- "Atlas",
- startup_atlas_irq,
- shutdown_atlas_irq,
- enable_atlas_irq,
- disable_atlas_irq,
- mask_and_ack_atlas_irq,
- end_atlas_irq,
- NULL
+ .typename = "Atlas",
+ .startup = startup_atlas_irq,
+ .shutdown = shutdown_atlas_irq,
+ .enable = enable_atlas_irq,
+ .disable = disable_atlas_irq,
+ .ack = mask_and_ack_atlas_irq,
+ .end = end_atlas_irq,
};
static inline int ls1bit32(unsigned int x)
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 0a1dd9b..625843b 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -50,8 +50,10 @@
return "MIPS Atlas";
}
-static int __init atlas_setup(void)
+void __init plat_setup(void)
{
+ mips_pcibios_init();
+
ioport_resource.end = 0x7fffffff;
serial_init ();
@@ -64,12 +66,8 @@
board_time_init = mips_time_init;
board_timer_setup = mips_timer_setup;
rtc_get_time = mips_rtc_get_time;
-
- return 0;
}
-early_initcall(atlas_setup);
-
static void __init serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index 311155d..eab5a70 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -22,18 +24,19 @@
#include <linux/string.h>
#include <linux/kernel.h>
-#include <asm/io.h>
#include <asm/bootinfo.h>
+#include <asm/gt64120.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
#include <asm/mips-boards/prom.h>
#include <asm/mips-boards/generic.h>
-#ifdef CONFIG_MIPS_GT64120
-#include <asm/gt64120.h>
-#endif
-#include <asm/mips-boards/msc01_pci.h>
#include <asm/mips-boards/bonito64.h>
-#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/msc01_pci.h>
+
#include <asm/mips-boards/malta.h>
-#endif
#ifdef CONFIG_KGDB
extern int rs_kgdb_hook(int, int);
@@ -223,8 +226,34 @@
}
#endif
+void __init mips_nmi_setup (void)
+{
+ void *base;
+ extern char except_vec_nmi;
+
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa80) :
+ (void *)(CAC_BASE + 0x380);
+ memcpy(base, &except_vec_nmi, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+void __init mips_ejtag_setup (void)
+{
+ void *base;
+ extern char except_vec_ejtag_debug;
+
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa00) :
+ (void *)(CAC_BASE + 0x300);
+ memcpy(base, &except_vec_ejtag_debug, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
void __init prom_init(void)
{
+ u32 start, map, mask, data;
+
prom_argc = fw_arg0;
_prom_argv = (int *) fw_arg1;
_prom_envp = (int *) fw_arg2;
@@ -266,12 +295,15 @@
#else
GT_WRITE(GT_PCI0_CMD_OFS, 0);
#endif
+ /* Fix up PCI I/O mapping if necessary (for Atlas). */
+ start = GT_READ(GT_PCI0IOLD_OFS);
+ map = GT_READ(GT_PCI0IOREMAP_OFS);
+ if ((start & map) != 0) {
+ map &= ~start;
+ GT_WRITE(GT_PCI0IOREMAP_OFS, map);
+ }
-#ifdef CONFIG_MIPS_MALTA
set_io_port_base(MALTA_GT_PORT_BASE);
-#else
- set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
break;
case MIPS_REVISION_CORID_CORE_EMUL_BON:
@@ -300,18 +332,21 @@
BONITO_BONGENCFG_BYTESWAP;
#endif
-#ifdef CONFIG_MIPS_MALTA
set_io_port_base(MALTA_BONITO_PORT_BASE);
-#else
- set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
break;
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
_pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
+ mb();
+ MSC_READ(MSC01_PCI_CFG, data);
+ MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT);
+ wmb();
+
+ /* Fix up lane swapping. */
#ifdef CONFIG_CPU_LITTLE_ENDIAN
MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
#else
@@ -320,12 +355,23 @@
MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
#endif
+ /* Fix up target memory mapping. */
+ MSC_READ(MSC01_PCI_BAR0, mask);
+ MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
-#ifdef CONFIG_MIPS_MALTA
+ /* Don't handle target retries indefinitely. */
+ if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
+ MSC01_PCI_CFG_MAXRTRY_MSK)
+ data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK <<
+ MSC01_PCI_CFG_MAXRTRY_SHF)) |
+ ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) <<
+ MSC01_PCI_CFG_MAXRTRY_SHF);
+
+ wmb();
+ MSC_WRITE(MSC01_PCI_CFG, data);
+ mb();
+
set_io_port_base(MALTA_MSC_PORT_BASE);
-#else
- set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
break;
default:
@@ -334,6 +380,9 @@
while(1); /* We die here... */
}
#endif
+ board_nmi_handler_setup = mips_nmi_setup;
+ board_ejtag_handler_setup = mips_ejtag_setup;
+
prom_printf("\nLINUX started...\n");
prom_init_cmdline();
prom_meminit();
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index 5ae2b43..2c8afd7 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
+#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
@@ -55,18 +56,30 @@
{
char *memsize_str;
unsigned int memsize;
+ char cmdline[CL_SIZE], *ptr;
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
- prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
- memsize = 0x02000000;
- } else {
-#ifdef DEBUG
- prom_printf("prom_memsize = %s\n", memsize_str);
-#endif
- memsize = simple_strtol(memsize_str, NULL, 0);
+ /* Check the command line first for a memsize directive */
+ strcpy(cmdline, arcs_cmdline);
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr) {
+ memsize = memparse(ptr + 8, &ptr);
}
-
+ else {
+ /* otherwise look in the environment */
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+ memsize = 0x02000000;
+ } else {
+#ifdef DEBUG
+ prom_printf("prom_memsize = %s\n", memsize_str);
+#endif
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+ }
memset(mdesc, 0, sizeof(mdesc));
mdesc[0].type = yamon_dontuse;
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
index 131f49b..a397ecb 100644
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -29,6 +29,20 @@
#include <asm/regdef.h>
#include <asm/stackframe.h>
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#define CASCADE_IRQ MIPSCPU_INT_ATLAS
+#define CASCADE_DISPATCH atlas_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/maltaint.h>
+#define CASCADE_IRQ MIPSCPU_INT_I8259A
+#define CASCADE_DISPATCH malta_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_SEAD
+#include <asm/mips-boards/seadint.h>
+#endif
+
/* A lot of complication here is taken away because:
*
* 1) We handle one interrupt and return, sitting in a loop and moving across
@@ -80,74 +94,62 @@
mfc0 s0, CP0_CAUSE # get irq bits
mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
and s0, s1
- /* First we check for r4k counter/timer IRQ. */
- andi a0, s0, CAUSEF_IP7
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
-
- /* Wheee, a timer interrupt. */
- move a0, sp
- jal mips_timer_interrupt
- nop
-
- j ret_from_irq
- nop
-
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
#else
- beq a0, zero, 1f # delay slot, check hw3 interrupt
- andi a0, s0, CAUSEF_IP5
+ beqz s0, spurious
+ li a0, 7
+
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
#endif
- /* Wheee, combined hardware level zero interrupt. */
-#if defined(CONFIG_MIPS_ATLAS)
- jal atlas_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_MALTA)
- jal malta_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_SEAD)
- jal sead_hw0_irqdispatch
+#ifdef CASCADE_IRQ
+ li a1, CASCADE_IRQ
+ bne a0, a1, 1f
+ addu a0, MIPSCPU_INT_BASE
+
+ jal CASCADE_DISPATCH
+ move a0, sp
+
+ j ret_from_irq
+ nop
+1:
#else
-#error "MIPS board not supported\n"
+ addu a0, MIPSCPU_INT_BASE
#endif
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
+ jal do_IRQ
+ move a1, sp
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt
- jal sead_hw1_irqdispatch
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
-1:
-#endif
-#if defined(CONFIG_MIPS_MALTA)
- beq a0, zero, 1f # check hw3 (coreHI) interrupt
- nop
- jal corehi_irqdispatch
- move a0, sp
j ret_from_irq
nop
-1:
-#endif
- /*
- * Here by mistake? This is possible, what can happen is that by the
- * time we take the exception the IRQ pin goes low, so just leave if
- * this is the case.
- */
- move a1,s0
- PRINT("Got interrupt: c0_cause = %08x\n")
- mfc0 a1, CP0_EPC
- PRINT("c0_epc = %08x\n")
- j ret_from_irq
+
+spurious:
+ j spurious_interrupt
nop
END(mipsIRQ)
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c
index 92c34bd..1f6f9df 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mips-boards/generic/pci.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
@@ -19,65 +21,46 @@
*
* MIPS boards specific PCI support.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/mips-boards/generic.h>
#include <asm/gt64120.h>
+
+#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/bonito64.h>
#include <asm/mips-boards/msc01_pci.h>
-#ifdef CONFIG_MIPS_MALTA
-#include <asm/mips-boards/malta.h>
-#endif
static struct resource bonito64_mem_resource = {
.name = "Bonito PCI MEM",
- .start = 0x10000000UL,
- .end = 0x1bffffffUL,
.flags = IORESOURCE_MEM,
};
static struct resource bonito64_io_resource = {
- .name = "Bonito IO MEM",
- .start = 0x00002000UL, /* avoid conflicts with YAMON allocated I/O addresses */
+ .name = "Bonito PCI I/O",
+ .start = 0x00000000UL,
.end = 0x000fffffUL,
.flags = IORESOURCE_IO,
};
static struct resource gt64120_mem_resource = {
- .name = "GT64120 PCI MEM",
- .start = 0x10000000UL,
- .end = 0x1bdfffffUL,
+ .name = "GT-64120 PCI MEM",
.flags = IORESOURCE_MEM,
};
static struct resource gt64120_io_resource = {
- .name = "GT64120 IO MEM",
-#ifdef CONFIG_MIPS_ATLAS
- .start = 0x18000000UL,
- .end = 0x181fffffUL,
-#endif
-#ifdef CONFIG_MIPS_MALTA
- .start = 0x00002000UL,
- .end = 0x001fffffUL,
-#endif
+ .name = "GT-64120 PCI I/O",
.flags = IORESOURCE_IO,
};
static struct resource msc_mem_resource = {
.name = "MSC PCI MEM",
- .start = 0x10000000UL,
- .end = 0x1fffffffUL,
.flags = IORESOURCE_MEM,
};
static struct resource msc_io_resource = {
- .name = "MSC IO MEM",
- .start = 0x00002000UL,
- .end = 0x007fffffUL,
+ .name = "MSC PCI I/O",
.flags = IORESOURCE_IO,
};
@@ -89,7 +72,6 @@
.pci_ops = &bonito64_pci_ops,
.io_resource = &bonito64_io_resource,
.mem_resource = &bonito64_mem_resource,
- .mem_offset = 0x10000000UL,
.io_offset = 0x00000000UL,
};
@@ -97,21 +79,18 @@
.pci_ops = >64120_pci_ops,
.io_resource = >64120_io_resource,
.mem_resource = >64120_mem_resource,
- .mem_offset = 0x00000000UL,
- .io_offset = 0x00000000UL,
};
-static struct pci_controller msc_controller = {
+static struct pci_controller msc_controller = {
.pci_ops = &msc_pci_ops,
.io_resource = &msc_io_resource,
.mem_resource = &msc_mem_resource,
- .mem_offset = 0x10000000UL,
- .io_offset = 0x00000000UL,
};
-static int __init pcibios_init(void)
+void __init mips_pcibios_init(void)
{
struct pci_controller *controller;
+ unsigned long start, end, map, start1, end1, map1, map2, map3, mask;
switch (mips_revision_corid) {
case MIPS_REVISION_CORID_QED_RM5261:
@@ -130,34 +109,140 @@
(0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */
(0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/
((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/
- GT_PCI0_CFGADDR_CONFIGEN_BIT );
+ GT_PCI0_CFGADDR_CONFIGEN_BIT);
/* Perform the write */
GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE));
+ /* Set up resource ranges from the controller's registers. */
+ start = GT_READ(GT_PCI0M0LD_OFS);
+ end = GT_READ(GT_PCI0M0HD_OFS);
+ map = GT_READ(GT_PCI0M0REMAP_OFS);
+ end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+ start1 = GT_READ(GT_PCI0M1LD_OFS);
+ end1 = GT_READ(GT_PCI0M1HD_OFS);
+ map1 = GT_READ(GT_PCI0M1REMAP_OFS);
+ end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK);
+ /* Cannot support multiple windows, use the wider. */
+ if (end1 - start1 > end - start) {
+ start = start1;
+ end = end1;
+ map = map1;
+ }
+ mask = ~(start ^ end);
+ /* We don't support remapping with a discontiguous mask. */
+ BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+ mask != ~((mask & -mask) - 1));
+ gt64120_mem_resource.start = start;
+ gt64120_mem_resource.end = end;
+ gt64120_controller.mem_offset = (start & mask) - (map & mask);
+ /* Addresses are 36-bit, so do shifts in the destinations. */
+ gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF;
+ gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF;
+ gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+ gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF;
+
+ start = GT_READ(GT_PCI0IOLD_OFS);
+ end = GT_READ(GT_PCI0IOHD_OFS);
+ map = GT_READ(GT_PCI0IOREMAP_OFS);
+ end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+ mask = ~(start ^ end);
+ /* We don't support remapping with a discontiguous mask. */
+ BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+ mask != ~((mask & -mask) - 1));
+ gt64120_io_resource.start = map & mask;
+ gt64120_io_resource.end = (map & mask) | ~mask;
+ gt64120_controller.io_offset = 0;
+ /* Addresses are 36-bit, so do shifts in the destinations. */
+ gt64120_io_resource.start <<= GT_PCI_DCRM_SHF;
+ gt64120_io_resource.end <<= GT_PCI_DCRM_SHF;
+ gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+
controller = >64120_controller;
break;
case MIPS_REVISION_CORID_BONITO64:
case MIPS_REVISION_CORID_CORE_20K:
case MIPS_REVISION_CORID_CORE_EMUL_BON:
+ /* Set up resource ranges from the controller's registers. */
+ map = BONITO_PCIMAP;
+ map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >>
+ BONITO_PCIMAP_PCIMAP_LO0_SHIFT;
+ map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >>
+ BONITO_PCIMAP_PCIMAP_LO1_SHIFT;
+ map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >>
+ BONITO_PCIMAP_PCIMAP_LO2_SHIFT;
+ /* Combine as many adjacent windows as possible. */
+ map = map1;
+ start = BONITO_PCILO0_BASE;
+ end = 1;
+ if (map3 == map2 + 1) {
+ map = map2;
+ start = BONITO_PCILO1_BASE;
+ end++;
+ }
+ if (map2 == map1 + 1) {
+ map = map1;
+ start = BONITO_PCILO0_BASE;
+ end++;
+ }
+ bonito64_mem_resource.start = start;
+ bonito64_mem_resource.end = start +
+ BONITO_PCIMAP_WINBASE(end) - 1;
+ bonito64_controller.mem_offset = start -
+ BONITO_PCIMAP_WINBASE(map);
+
controller = &bonito64_controller;
break;
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ /* Set up resource ranges from the controller's registers. */
+ MSC_READ(MSC01_PCI_SC2PMBASL, start);
+ MSC_READ(MSC01_PCI_SC2PMMSKL, mask);
+ MSC_READ(MSC01_PCI_SC2PMMAPL, map);
+ msc_mem_resource.start = start & mask;
+ msc_mem_resource.end = (start & mask) | ~mask;
+ msc_controller.mem_offset = (start & mask) - (map & mask);
+
+ MSC_READ(MSC01_PCI_SC2PIOBASL, start);
+ MSC_READ(MSC01_PCI_SC2PIOMSKL, mask);
+ MSC_READ(MSC01_PCI_SC2PIOMAPL, map);
+ msc_io_resource.start = map & mask;
+ msc_io_resource.end = (map & mask) | ~mask;
+ msc_controller.io_offset = 0;
+ ioport_resource.end = ~mask;
+
+ /* If ranges overlap I/O takes precedence. */
+ start = start & mask;
+ end = start | ~mask;
+ if ((start >= msc_mem_resource.start &&
+ start <= msc_mem_resource.end) ||
+ (end >= msc_mem_resource.start &&
+ end <= msc_mem_resource.end)) {
+ /* Use the larger space. */
+ start = max(start, msc_mem_resource.start);
+ end = min(end, msc_mem_resource.end);
+ if (start - msc_mem_resource.start >=
+ msc_mem_resource.end - end)
+ msc_mem_resource.end = start - 1;
+ else
+ msc_mem_resource.start = end + 1;
+ }
+
controller = &msc_controller;
break;
default:
- return 1;
+ return;
}
+ if (controller->io_resource->start < 0x00001000UL) /* FIXME */
+ controller->io_resource->start = 0x00001000UL;
+
+ iomem_resource.end &= 0xfffffffffULL; /* 64 GB */
ioport_resource.end = controller->io_resource->end;
register_pci_controller (controller);
-
- return 0;
}
-
-early_initcall(pcibios_init);
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 1631544..72a12d9 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -31,22 +31,21 @@
#include <asm/mipsregs.h>
#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/cpu.h>
#include <asm/time.h>
#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/mc146818-time.h>
unsigned long cpu_khz;
-#if defined(CONFIG_MIPS_SEAD)
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ5)
-#else
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-#endif
-
#if defined(CONFIG_MIPS_ATLAS)
static char display_string[] = " LINUX ON ATLAS ";
#endif
@@ -59,20 +58,61 @@
static unsigned int display_count = 0;
#define MAX_DISPLAY_COUNT (sizeof(display_string) - 8)
-#define MIPS_CPU_TIMER_IRQ (NR_IRQS-1)
-
static unsigned int timer_tick_count=0;
+static int mips_cpu_timer_irq;
-void mips_timer_interrupt(struct pt_regs *regs)
+static inline void scroll_display_message(void)
{
if ((timer_tick_count++ % HZ) == 0) {
mips_display_message(&display_string[display_count++]);
if (display_count == MAX_DISPLAY_COUNT)
- display_count = 0;
+ display_count = 0;
+ }
+}
+static void mips_timer_dispatch (struct pt_regs *regs)
+{
+ do_IRQ (mips_cpu_timer_irq, regs);
+}
+
+irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+ int cpu = smp_processor_id();
+
+ if (cpu == 0) {
+ /*
+ * CPU 0 handles the global timer interrupt job and process accounting
+ * resets count/compare registers to trigger next timer int.
+ */
+ (void) timer_interrupt(irq, dev_id, regs);
+ scroll_display_message();
+ }
+ else {
+ /* Everyone else needs to reset the timer int here as
+ ll_local_timer_interrupt doesn't */
+ /*
+ * FIXME: need to cope with counter underflow.
+ * More support needs to be added to kernel/time for
+ * counter/timer interrupts on multiple CPU's
+ */
+ write_c0_compare (read_c0_count() + (mips_hpt_frequency/HZ));
+ /*
+ * other CPUs should do profiling and process accounting
+ */
+ local_timer_interrupt (irq, dev_id, regs);
}
- ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs);
+ return IRQ_HANDLED;
+#else
+ irqreturn_t r;
+
+ r = timer_interrupt(irq, dev_id, regs);
+
+ scroll_display_message();
+
+ return r;
+#endif
}
/*
@@ -140,10 +180,8 @@
local_irq_save(flags);
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
/* Set Data mode - binary. */
CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-#endif
est_freq = estimate_cpu_frequency ();
@@ -157,11 +195,29 @@
void __init mips_timer_setup(struct irqaction *irq)
{
+ if (cpu_has_veic) {
+ set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+ }
+ else {
+ if (cpu_has_vint)
+ set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+ }
+
+
/* we are using the cpu counter for timer interrupts */
- irq->handler = no_action; /* we use our own handler */
- setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+ irq->handler = mips_timer_interrupt; /* we use our own handler */
+ setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+ /* irq_desc(riptor) is a global resource, when the interrupt overlaps
+ on seperate cpu's the first one tries to handle the second interrupt.
+ The effect is that the int remains disabled on the second cpu.
+ Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+ irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
+#endif
/* to generate the first timer interrupt */
write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
- set_c0_status(ALLINTS);
}
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index dd2db35..d06dc5ad 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -30,6 +30,7 @@
#include <linux/random.h>
#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
#include <asm/io.h>
#include <asm/mips-boards/malta.h>
#include <asm/mips-boards/maltaint.h>
@@ -37,8 +38,10 @@
#include <asm/gt64120.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/msc01_pci.h>
+#include <asm/msc01_ic.h>
extern asmlinkage void mipsIRQ(void);
+extern void mips_timer_interrupt(void);
static DEFINE_SPINLOCK(mips_irq_lock);
@@ -54,6 +57,7 @@
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
MSC_READ(MSC01_PCI_IACK, irq);
irq &= 0xff;
@@ -91,88 +95,86 @@
return irq;
}
-static inline int get_int(int *irq)
+static inline int get_int(void)
{
unsigned long flags;
-
+ int irq;
spin_lock_irqsave(&mips_irq_lock, flags);
- *irq = mips_pcibios_iack();
+ irq = mips_pcibios_iack();
/*
- * IRQ7 is used to detect spurious interrupts.
- * The interrupt acknowledge cycle returns IRQ7, if no
- * interrupts is requested.
- * We can differentiate between this situation and a
- * "Normal" IRQ7 by reading the ISR.
+ * The only way we can decide if an interrupt is spurious
+ * is by checking the 8259 registers. This needs a spinlock
+ * on an SMP system, so leave it up to the generic code...
*/
- if (*irq == 7)
- {
- outb(PIIX4_OCW3_SEL | PIIX4_OCW3_ISR,
- PIIX4_ICTLR1_OCW3);
- if (!(inb(PIIX4_ICTLR1_OCW3) & (1 << 7))) {
- spin_unlock_irqrestore(&mips_irq_lock, flags);
- printk("We got a spurious interrupt from PIIX4.\n");
- atomic_inc(&irq_err_count);
- return -1; /* Spurious interrupt. */
- }
- }
spin_unlock_irqrestore(&mips_irq_lock, flags);
- return 0;
+ return irq;
}
void malta_hw0_irqdispatch(struct pt_regs *regs)
{
int irq;
- if (get_int(&irq))
- return; /* interrupt has already been cleared */
+ irq = get_int();
+ if (irq < 0)
+ return; /* interrupt has already been cleared */
- do_IRQ(irq, regs);
+ do_IRQ(MALTA_INT_BASE+irq, regs);
}
void corehi_irqdispatch(struct pt_regs *regs)
{
- unsigned int data,datahi;
-
- /* Mask out corehi interrupt. */
- clear_c0_status(IE_IRQ3);
+ unsigned int intrcause,datalo,datahi;
+ unsigned int pcimstat, intisr, inten, intpol, intedge, intsteer, pcicmd, pcibadaddr;
printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n");
printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n"
, regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr);
+
+ /* Read all the registers and then print them as there is a
+ problem with interspersed printk's upsetting the Bonito controller.
+ Do it for the others too.
+ */
+
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
- case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ ll_msc_irq(regs);
break;
case MIPS_REVISION_CORID_QED_RM5261:
case MIPS_REVISION_CORID_CORE_LV:
case MIPS_REVISION_CORID_CORE_FPGA:
case MIPS_REVISION_CORID_CORE_FPGAR2:
- data = GT_READ(GT_INTRCAUSE_OFS);
- printk("GT_INTRCAUSE = %08x\n", data);
- data = GT_READ(GT_CPUERR_ADDRLO_OFS);
+ intrcause = GT_READ(GT_INTRCAUSE_OFS);
+ datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
- printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, data);
+ printk("GT_INTRCAUSE = %08x\n", intrcause);
+ printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, datalo);
break;
case MIPS_REVISION_CORID_BONITO64:
case MIPS_REVISION_CORID_CORE_20K:
case MIPS_REVISION_CORID_CORE_EMUL_BON:
- data = BONITO_INTISR;
- printk("BONITO_INTISR = %08x\n", data);
- data = BONITO_INTEN;
- printk("BONITO_INTEN = %08x\n", data);
- data = BONITO_INTPOL;
- printk("BONITO_INTPOL = %08x\n", data);
- data = BONITO_INTEDGE;
- printk("BONITO_INTEDGE = %08x\n", data);
- data = BONITO_INTSTEER;
- printk("BONITO_INTSTEER = %08x\n", data);
- data = BONITO_PCICMD;
- printk("BONITO_PCICMD = %08x\n", data);
+ pcibadaddr = BONITO_PCIBADADDR;
+ pcimstat = BONITO_PCIMSTAT;
+ intisr = BONITO_INTISR;
+ inten = BONITO_INTEN;
+ intpol = BONITO_INTPOL;
+ intedge = BONITO_INTEDGE;
+ intsteer = BONITO_INTSTEER;
+ pcicmd = BONITO_PCICMD;
+ printk("BONITO_INTISR = %08x\n", intisr);
+ printk("BONITO_INTEN = %08x\n", inten);
+ printk("BONITO_INTPOL = %08x\n", intpol);
+ printk("BONITO_INTEDGE = %08x\n", intedge);
+ printk("BONITO_INTSTEER = %08x\n", intsteer);
+ printk("BONITO_PCICMD = %08x\n", pcicmd);
+ printk("BONITO_PCIBADADDR = %08x\n", pcibadaddr);
+ printk("BONITO_PCIMSTAT = %08x\n", pcimstat);
break;
}
@@ -180,8 +182,71 @@
die("CoreHi interrupt", regs);
}
+static struct irqaction i8259irq = {
+ .handler = no_action,
+ .name = "XT-PIC cascade"
+};
+
+static struct irqaction corehi_irqaction = {
+ .handler = no_action,
+ .name = "CoreHi"
+};
+
+msc_irqmap_t __initdata msc_irqmap[] = {
+ {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
+};
+int __initdata msc_nr_irqs = sizeof(msc_irqmap)/sizeof(msc_irqmap_t);
+
+msc_irqmap_t __initdata msc_eicirqmap[] = {
+ {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
+};
+int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t);
+
void __init arch_init_irq(void)
{
set_except_vector(0, mipsIRQ);
init_i8259_irqs();
+
+ if (!cpu_has_veic)
+ mips_cpu_irq_init (MIPSCPU_INT_BASE);
+
+ switch(mips_revision_corid) {
+ case MIPS_REVISION_CORID_CORE_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ if (cpu_has_veic)
+ init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
+ else
+ init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
+ }
+
+ if (cpu_has_veic) {
+ set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch);
+ set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch);
+ setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
+ setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
+ }
+ else if (cpu_has_vint) {
+ set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
+ set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
+
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+ }
+ else {
+ set_except_vector(0, mipsIRQ);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+ }
}
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index df6db64..2209e8a 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -111,10 +111,12 @@
}
#endif
-static int __init malta_setup(void)
+void __init plat_setup(void)
{
unsigned int i;
+ mips_pcibios_init();
+
/* Request I/O space for devices used on the Malta board. */
for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
request_resource(&ioport_resource, standard_io_resources+i);
@@ -224,8 +226,4 @@
board_time_init = mips_time_init;
board_timer_setup = mips_timer_setup;
rtc_get_time = mips_rtc_get_time;
-
- return 0;
}
-
-early_initcall(malta_setup);
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
index e510965..e1dd7e0 100644
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ b/arch/mips/mips-boards/sead/sead_int.c
@@ -2,6 +2,7 @@
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2004 Maciej W. Rozycki
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -21,7 +22,9 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
-#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/system.h>
#include <asm/mips-boards/seadint.h>
@@ -39,13 +42,8 @@
void __init arch_init_irq(void)
{
- /*
- * Mask out all interrupt
- */
- clear_c0_status(0x0000ff00);
+ mips_cpu_irq_init(0);
/* Now safe to set the exception vector. */
set_except_vector(0, mipsIRQ);
-
- mips_cpu_irq_init(0);
}
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
index 29892b8..de90bec 100644
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -57,8 +57,6 @@
mips_reboot_setup();
}
-early_initcall(sead_setup);
-
static void __init serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
diff --git a/arch/mips/mips-boards/sim/Makefile b/arch/mips/mips-boards/sim/Makefile
new file mode 100644
index 0000000..5b977de
--- /dev/null
+++ b/arch/mips/mips-boards/sim/Makefile
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+
+obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_irq.o \
+ sim_cmdline.o
+obj-$(CONFIG_SMP) += sim_smp.o
diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c
new file mode 100644
index 0000000..fef9fbd
--- /dev/null
+++ b/arch/mips/mips-boards/sim/cmdline.c
@@ -0,0 +1,59 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+extern int prom_argc;
+extern int *_prom_argv;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
+
+char arcs_cmdline[CL_SIZE];
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+
+void __init prom_init_cmdline(void)
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while(actr < prom_argc) {
+ strcpy(cp, prom_argv(actr));
+ cp += strlen(prom_argv(actr));
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+}
diff --git a/arch/mips/mips-boards/sim/sim_IRQ.c b/arch/mips/mips-boards/sim/sim_IRQ.c
new file mode 100644
index 0000000..9987a85
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_IRQ.c
@@ -0,0 +1,148 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ * all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ * common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ * would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ * between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Combined hardware interrupt (hw0)
+ * 3 Hardware (ignored)
+ * 4 Hardware (ignored)
+ * 5 Hardware (ignored)
+ * 6 Hardware (ignored)
+ * 7 R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ * wired to UART1.
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Lowest ---- Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(mipsIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE # get irq bits
+ mfc0 s1, CP0_STATUS # get irq mask
+ and s0, s1
+
+ /* First we check for r4k counter/timer IRQ. */
+ andi a0, s0, CAUSEF_IP7
+ beq a0, zero, 1f
+ andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
+
+ /* Wheee, a timer interrupt. */
+ move a0, sp
+ jal mips_timer_interrupt
+ nop
+
+ j ret_from_irq
+ nop
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+ beq a0, zero, 1f
+ andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt
+#else
+ beq a0, zero, 1f # delay slot, check hw3 interrupt
+ andi a0, s0, CAUSEF_IP5
+#endif
+
+ /* Wheee, combined hardware level zero interrupt. */
+#if defined(CONFIG_MIPS_ATLAS)
+ jal atlas_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_MALTA)
+ jal malta_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_SEAD)
+ jal sead_hw0_irqdispatch
+#else
+#error "MIPS board not supported\n"
+#endif
+ move a0, sp # delay slot
+
+ j ret_from_irq
+ nop # delay slot
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+ beq a0, zero, 1f
+ andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt
+ jal sead_hw1_irqdispatch
+ move a0, sp # delay slot
+ j ret_from_irq
+ nop # delay slot
+1:
+#endif
+#if defined(CONFIG_MIPS_MALTA)
+ beq a0, zero, 1f # check hw3 (coreHI) interrupt
+ nop
+ jal corehi_irqdispatch
+ move a0, sp
+ j ret_from_irq
+ nop
+1:
+#endif
+ /*
+ * Here by mistake? This is possible, what can happen is that by the
+ * time we take the exception the IRQ pin goes low, so just leave if
+ * this is the case.
+ */
+ move a1,s0
+ PRINT("Got interrupt: c0_cause = %08x\n")
+ mfc0 a1, CP0_EPC
+ PRINT("c0_epc = %08x\n")
+
+ j ret_from_irq
+ nop
+ END(mipsIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c
new file mode 100644
index 0000000..9df37c6
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_cmdline.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/bootinfo.h>
+
+extern char arcs_cmdline[];
+
+char * __init prom_getcmdline(void)
+{
+ return arcs_cmdline;
+}
+
+
+void __init prom_init_cmdline(void)
+{
+ /* nothing to do */
+}
diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c
new file mode 100644
index 0000000..a4d0a2c
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_int.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <asm/mips-boards/simint.h>
+
+
+extern void mips_cpu_irq_init(int);
+
+extern asmlinkage void simIRQ(void);
+
+asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs)
+{
+ do_IRQ(2, regs);
+}
+
+void __init arch_init_irq(void)
+{
+ /* Now safe to set the exception vector. */
+ set_except_vector(0, simIRQ);
+
+ mips_cpu_irq_init(MIPSCPU_INT_BASE);
+}
diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S
new file mode 100644
index 0000000..835f038
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_irq.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#include <asm/mips-boards/simint.h>
+
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(simIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE # get irq bits
+ mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
+ and s0, s1
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
+#else
+ beqz s0, spurious
+ li a0, 7
+
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
+#endif
+
+#ifdef CASCADE_IRQ
+ li a1, CASCADE_IRQ
+ bne a0, a1, 1f
+ addu a0, MIPSCPU_INT_BASE
+
+ jal CASCADE_DISPATCH
+ move a0, sp
+
+ j ret_from_irq
+ nop
+1:
+#else
+ addu a0, MIPSCPU_INT_BASE
+#endif
+
+ jal do_IRQ
+ move a1, sp
+
+ j ret_from_irq
+ nop
+
+
+spurious:
+ j spurious_interrupt
+ nop
+ END(simIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c
new file mode 100644
index 0000000..0dbd743
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_mem.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+
+#include <asm/mips-boards/prom.h>
+
+/*#define DEBUG*/
+
+enum simmem_memtypes {
+ simmem_reserved = 0,
+ simmem_free,
+};
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+#ifdef DEBUG
+static char *mtypes[3] = {
+ "SIM reserved memory",
+ "SIM free memory",
+};
+#endif
+
+/* References to section boundaries */
+extern char _end;
+
+#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+
+struct prom_pmemblock * __init prom_getmdesc(void)
+{
+ unsigned int memsize;
+
+ memsize = 0x02000000;
+ prom_printf("Setting default memory size 0x%08x\n", memsize);
+
+ memset(mdesc, 0, sizeof(mdesc));
+
+ mdesc[0].type = simmem_reserved;
+ mdesc[0].base = 0x00000000;
+ mdesc[0].size = 0x00001000;
+
+ mdesc[1].type = simmem_free;
+ mdesc[1].base = 0x00001000;
+ mdesc[1].size = 0x000ff000;
+
+ mdesc[2].type = simmem_reserved;
+ mdesc[2].base = 0x00100000;
+ mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base;
+
+ mdesc[3].type = simmem_free;
+ mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end));
+ mdesc[3].size = memsize - mdesc[3].base;
+
+ return &mdesc[0];
+}
+
+static int __init prom_memtype_classify (unsigned int type)
+{
+ switch (type) {
+ case simmem_free:
+ return BOOT_MEM_RAM;
+ case simmem_reserved:
+ default:
+ return BOOT_MEM_RESERVED;
+ }
+}
+
+void __init prom_meminit(void)
+{
+ struct prom_pmemblock *p;
+
+ p = prom_getmdesc();
+
+ while (p->size) {
+ long type;
+ unsigned long base, size;
+
+ type = prom_memtype_classify (p->type);
+ base = p->base;
+ size = p->size;
+
+ add_memory_region(base, size, type);
+ p++;
+ }
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ int i;
+ unsigned long freed = 0;
+ unsigned long addr;
+
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+ continue;
+
+ addr = boot_mem_map.map[i].addr;
+ while (addr < boot_mem_map.map[i].addr
+ + boot_mem_map.map[i].size) {
+ ClearPageReserved(virt_to_page(__va(addr)));
+ set_page_count(virt_to_page(__va(addr)), 1);
+ free_page((unsigned long)__va(addr));
+ addr += PAGE_SIZE;
+ freed += PAGE_SIZE;
+ }
+ }
+ printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
+
+ return freed;
+}
diff --git a/arch/mips/mips-boards/sim/sim_printf.c b/arch/mips/mips-boards/sim/sim_printf.c
new file mode 100644
index 0000000..3ee5a0b
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_printf.c
@@ -0,0 +1,74 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+static inline unsigned int serial_in(int offset)
+{
+ return inb(0x3f8 + offset);
+}
+
+static inline void serial_out(int offset, int value)
+{
+ outb(value, 0x3f8 + offset);
+}
+
+int putPromChar(char c)
+{
+ while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
+ ;
+
+ serial_out(UART_TX, c);
+
+ return 1;
+}
+
+char getPromChar(void)
+{
+ while (!(serial_in(UART_LSR) & 1))
+ ;
+
+ return serial_in(UART_RX);
+}
+
+void prom_printf(char *fmt, ...)
+{
+ va_list args;
+ int l;
+ char *p, *buf_end;
+ char buf[1024];
+
+ va_start(args, fmt);
+ l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+ va_end(args);
+
+ buf_end = buf + l;
+
+ for (p = buf; p < buf_end; p++) {
+ /* Crude cr/nl handling is better than none */
+ if (*p == '\n')
+ putPromChar('\r');
+ putPromChar(*p);
+ }
+}
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
new file mode 100644
index 0000000..485d5a5
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/serial.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mips-boards/sim.h>
+#include <asm/mips-boards/simint.h>
+
+
+extern void sim_time_init(void);
+extern void sim_timer_setup(struct irqaction *irq);
+static void __init serial_init(void);
+unsigned int _isbonito = 0;
+
+extern void __init sanitize_tlb_entries(void);
+
+
+const char *get_system_type(void)
+{
+ return "MIPSsim";
+}
+
+void __init plat_setup(void)
+{
+ set_io_port_base(0xbfd00000);
+
+ serial_init();
+
+ board_time_init = sim_time_init;
+ board_timer_setup = sim_timer_setup;
+ prom_printf("Linux started...\n");
+
+#ifdef CONFIG_MT_SMP
+ sanitize_tlb_entries();
+#endif
+}
+
+void prom_init(void)
+{
+ set_io_port_base(0xbfd00000);
+
+ prom_printf("\nLINUX started...\n");
+ prom_init_cmdline();
+ prom_meminit();
+}
+
+
+static void __init serial_init(void)
+{
+#ifdef CONFIG_SERIAL_8250
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+
+ s.iobase = 0x3f8;
+
+ /* hardware int 4 - the serial int, is CPU int 6
+ but poll for now */
+ s.irq = 0;
+ s.uartclk = BASE_BAUD * 16;
+ s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
+ s.regshift = 0;
+ s.timeout = 4;
+
+ if (early_serial_setup(&s) != 0) {
+ prom_printf(KERN_ERR "Serial setup failed!\n");
+ }
+
+#endif
+}
diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c
new file mode 100644
index 0000000..1982435
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_smp.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+/*
+ * Simulator Platform-specific hooks for SMP operation
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/smtc_ipi.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+#if !defined(CONFIG_MIPS_MT_SMP)
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_send_ipi(int, int, unsigned int);
+
+ smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+#endif /* CONFIG_MIPS_MT_SMTC */
+/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+
+}
+
+/*
+ * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map
+ */
+
+void __init prom_build_cpu_map(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ extern int mipsmt_build_cpu_map(int startslot);
+ int nextslot;
+
+ cpus_clear(phys_cpu_present_map);
+
+ /* Register the boot CPU */
+
+ smp_prepare_boot_cpu();
+
+ /*
+ * As of November, 2004, MIPSsim only simulates one core
+ * at a time. However, that core may be a MIPS MT core
+ * with multiple virtual processors and thread contexts.
+ */
+
+ if (read_c0_config3() & (1<<2)) {
+ nextslot = mipsmt_build_cpu_map(1);
+ }
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+
+ smtc_boot_secondary(cpu, idle);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+
+void prom_init_secondary(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_init_secondary(void);
+
+ smtc_init_secondary();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform SMP pre-initialization
+ */
+
+void prom_prepare_cpus(unsigned int max_cpus)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void mipsmt_prepare_cpus(int c);
+ /*
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
+ */
+
+ if (read_c0_config3() & (1<<2)) {
+ mipsmt_prepare_cpus(max_cpus);
+ }
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+
+void prom_smp_finish(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_smp_finish(void);
+
+ smtc_smp_finish();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+void prom_cpus_done(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+#endif /* CONFIG_MIPS32R2_MT_SMP */
diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c
new file mode 100644
index 0000000..18b968c
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_time.c
@@ -0,0 +1,215 @@
+#include <linux/types.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/timex.h>
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/simint.h>
+#include <asm/mc146818-time.h>
+#include <asm/smp.h>
+
+
+unsigned long cpu_khz;
+
+extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
+
+irqreturn_t sim_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+ int cpu = smp_processor_id();
+
+ /*
+ * CPU 0 handles the global timer interrupt job
+ * resets count/compare registers to trigger next timer int.
+ */
+#ifndef CONFIG_MIPS_MT_SMTC
+ if (cpu == 0) {
+ timer_interrupt(irq, dev_id, regs);
+ }
+ else {
+ /* Everyone else needs to reset the timer int here as
+ ll_local_timer_interrupt doesn't */
+ /*
+ * FIXME: need to cope with counter underflow.
+ * More support needs to be added to kernel/time for
+ * counter/timer interrupts on multiple CPU's
+ */
+ write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+ }
+#else /* SMTC */
+ /*
+ * In SMTC system, one Count/Compare set exists per VPE.
+ * Which TC within a VPE gets the interrupt is essentially
+ * random - we only know that it shouldn't be one with
+ * IXMT set. Whichever TC gets the interrupt needs to
+ * send special interprocessor interrupts to the other
+ * TCs to make sure that they schedule, etc.
+ *
+ * That code is specific to the SMTC kernel, not to
+ * the simulation platform, so it's invoked from
+ * the general MIPS timer_interrupt routine.
+ *
+ * We have a problem in that the interrupt vector code
+ * had to turn off the timer IM bit to avoid redundant
+ * entries, but we may never get to mips_cpu_irq_end
+ * to turn it back on again if the scheduler gets
+ * involved. So we clear the pending timer here,
+ * and re-enable the mask...
+ */
+
+ int vpflags = dvpe();
+ write_c0_compare (read_c0_count() - 1);
+ clear_c0_cause(0x100 << MIPSCPU_INT_CPUCTR);
+ set_c0_status(0x100 << MIPSCPU_INT_CPUCTR);
+ irq_enable_hazard();
+ evpe(vpflags);
+
+ if(cpu_data[cpu].vpe_id == 0) timer_interrupt(irq, dev_id, regs);
+ else write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+ smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+ /*
+ * every CPU should do profiling and process accounting
+ */
+ local_timer_interrupt (irq, dev_id, regs);
+ return IRQ_HANDLED;
+#else
+ return timer_interrupt (irq, dev_id, regs);
+#endif
+}
+
+
+
+/*
+ * Estimate CPU frequency. Sets mips_counter_frequency as a side-effect
+ */
+static unsigned int __init estimate_cpu_frequency(void)
+{
+ unsigned int prid = read_c0_prid() & 0xffff00;
+ unsigned int count;
+
+#if 1
+ /*
+ * hardwire the board frequency to 12MHz.
+ */
+
+ if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
+ (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
+ count = 12000000;
+ else
+ count = 6000000;
+#else
+ unsigned int flags;
+
+ local_irq_save(flags);
+
+ /* Start counter exactly on falling edge of update flag */
+ while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+ while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+ /* Start r4k counter. */
+ write_c0_count(0);
+
+ /* Read counter exactly on falling edge of update flag */
+ while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+ while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+ count = read_c0_count();
+
+ /* restore interrupts */
+ local_irq_restore(flags);
+#endif
+
+ mips_hpt_frequency = count;
+
+ if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+ (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+ count *= 2;
+
+ count += 5000; /* round */
+ count -= count%10000;
+
+ return count;
+}
+
+void __init sim_time_init(void)
+{
+ unsigned int est_freq, flags;
+
+ local_irq_save(flags);
+
+
+ /* Set Data mode - binary. */
+ CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+
+ est_freq = estimate_cpu_frequency ();
+
+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+ (est_freq%1000000)*100/1000000);
+
+ cpu_khz = est_freq / 1000;
+
+ local_irq_restore(flags);
+}
+
+static int mips_cpu_timer_irq;
+
+static void mips_timer_dispatch (struct pt_regs *regs)
+{
+ do_IRQ (mips_cpu_timer_irq, regs);
+}
+
+
+void __init sim_timer_setup(struct irqaction *irq)
+{
+ if (cpu_has_veic) {
+ set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+ }
+ else {
+ if (cpu_has_vint)
+ set_vi_handler(MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+ }
+
+ /* we are using the cpu counter for timer interrupts */
+ irq->handler = sim_timer_interrupt;
+ setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+ /* irq_desc(riptor) is a global resource, when the interrupt overlaps
+ on seperate cpu's the first one tries to handle the second interrupt.
+ The effect is that the int remains disabled on the second cpu.
+ Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+ irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
+#endif
+
+ /* to generate the first timer interrupt */
+ write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
+}
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index b56a0ab..b0178da 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -22,7 +22,7 @@
obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_SB1) += c-sb1.o cerr-sb1.o cex-sb1.o pg-sb1.o \
- tlb-sb1.o
+ tlb-r4k.o
obj-$(CONFIG_CPU_TX39XX) += c-tx39.o pg-r4k.o tlb-r3k.o
obj-$(CONFIG_CPU_TX49XX) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index c659f99..27f4fa2 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -221,12 +221,14 @@
struct mm_struct *mm)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
unsigned long physpage;
pgd = pgd_offset(mm, addr);
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
pte = pte_offset(pmd, addr);
if ((physpage = pte_val(*pte)) & _PAGE_VALID)
@@ -317,7 +319,7 @@
r3k_flush_dcache_range(start, start + size);
}
-void __init ld_mmu_r23000(void)
+void __init r3k_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5ea84bc..38223b4 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -16,6 +16,7 @@
#include <asm/bcache.h>
#include <asm/bootinfo.h>
+#include <asm/cache.h>
#include <asm/cacheops.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -26,8 +27,14 @@
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/war.h>
+#include <asm/cacheflush.h> /* for run_uncached() */
-static unsigned long icache_size, dcache_size, scache_size;
+/*
+ * Must die.
+ */
+static unsigned long icache_size __read_mostly;
+static unsigned long dcache_size __read_mostly;
+static unsigned long scache_size __read_mostly;
/*
* Dummy cache handling routines for machines without boardcaches
@@ -43,8 +50,8 @@
struct bcache_ops *bcops = &no_sc_ops;
-#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x2010)
-#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x2020)
+#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
#define R4600_HIT_CACHEOP_WAR_IMPL \
do { \
@@ -190,12 +197,12 @@
if (ic_lsize == 16)
r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
else if (ic_lsize == 32) {
- if (TX49XX_ICACHE_INDEX_INV_WAR)
- r4k_blast_icache_page_indexed =
- tx49_blast_icache32_page_indexed;
- else if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
+ if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
r4k_blast_icache_page_indexed =
blast_icache32_r4600_v1_page_indexed;
+ else if (TX49XX_ICACHE_INDEX_INV_WAR)
+ r4k_blast_icache_page_indexed =
+ tx49_blast_icache32_page_indexed;
else
r4k_blast_icache_page_indexed =
blast_icache32_page_indexed;
@@ -361,24 +368,33 @@
struct flush_cache_page_args {
struct vm_area_struct *vma;
- unsigned long page;
+ unsigned long addr;
};
static inline void local_r4k_flush_cache_page(void *args)
{
struct flush_cache_page_args *fcp_args = args;
struct vm_area_struct *vma = fcp_args->vma;
- unsigned long page = fcp_args->page;
+ unsigned long addr = fcp_args->addr;
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
- page &= PAGE_MASK;
- pgdp = pgd_offset(mm, page);
- pmdp = pmd_offset(pgdp, page);
- ptep = pte_offset(pmdp, page);
+ /*
+ * If ownes no valid ASID yet, cannot possibly have gotten
+ * this page into the cache.
+ */
+ if (cpu_context(smp_processor_id(), mm) == 0)
+ return;
+
+ addr &= PAGE_MASK;
+ pgdp = pgd_offset(mm, addr);
+ pudp = pud_offset(pgdp, addr);
+ pmdp = pmd_offset(pudp, addr);
+ ptep = pte_offset(pmdp, addr);
/*
* If the page isn't marked valid, the page cannot possibly be
@@ -395,12 +411,12 @@
*/
if ((mm == current->active_mm) && (pte_val(*ptep) & _PAGE_VALID)) {
if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
- r4k_blast_dcache_page(page);
+ r4k_blast_dcache_page(addr);
if (exec && !cpu_icache_snoops_remote_store)
- r4k_blast_scache_page(page);
+ r4k_blast_scache_page(addr);
}
if (exec)
- r4k_blast_icache_page(page);
+ r4k_blast_icache_page(addr);
return;
}
@@ -409,36 +425,30 @@
* Do indexed flush, too much work to get the (possible) TLB refills
* to work correctly.
*/
- page = INDEX_BASE + (page & (dcache_size - 1));
+ addr = INDEX_BASE + (addr & (dcache_size - 1));
if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
- r4k_blast_dcache_page_indexed(page);
+ r4k_blast_dcache_page_indexed(addr);
if (exec && !cpu_icache_snoops_remote_store)
- r4k_blast_scache_page_indexed(page);
+ r4k_blast_scache_page_indexed(addr);
}
if (exec) {
if (cpu_has_vtag_icache) {
int cpu = smp_processor_id();
- if (cpu_context(cpu, vma->vm_mm) != 0)
- drop_mmu_context(vma->vm_mm, cpu);
+ if (cpu_context(cpu, mm) != 0)
+ drop_mmu_context(mm, cpu);
} else
- r4k_blast_icache_page_indexed(page);
+ r4k_blast_icache_page_indexed(addr);
}
}
-static void r4k_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
+static void r4k_flush_cache_page(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long pfn)
{
struct flush_cache_page_args args;
- /*
- * If ownes no valid ASID yet, cannot possibly have gotten
- * this page into the cache.
- */
- if (cpu_context(smp_processor_id(), vma->vm_mm) == 0)
- return;
-
args.vma = vma;
- args.page = page;
+ args.addr = addr;
on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
}
@@ -454,16 +464,16 @@
}
struct flush_icache_range_args {
- unsigned long start;
- unsigned long end;
+ unsigned long __user start;
+ unsigned long __user end;
};
static inline void local_r4k_flush_icache_range(void *args)
{
struct flush_icache_range_args *fir_args = args;
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- unsigned long ic_lsize = current_cpu_data.icache.linesz;
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
+ unsigned long dc_lsize = cpu_dcache_line_size();
+ unsigned long ic_lsize = cpu_icache_line_size();
+ unsigned long sc_lsize = cpu_scache_line_size();
unsigned long start = fir_args->start;
unsigned long end = fir_args->end;
unsigned long addr, aend;
@@ -472,6 +482,7 @@
if (end - start > dcache_size) {
r4k_blast_dcache();
} else {
+ R4600_HIT_CACHEOP_WAR_IMPL;
addr = start & ~(dc_lsize - 1);
aend = (end - 1) & ~(dc_lsize - 1);
@@ -492,7 +503,7 @@
aend = (end - 1) & ~(sc_lsize - 1);
while (1) {
- /* Hit_Writeback_Inv_D */
+ /* Hit_Writeback_Inv_SD */
protected_writeback_scache_line(addr);
if (addr == aend)
break;
@@ -517,7 +528,8 @@
}
}
-static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+static void r4k_flush_icache_range(unsigned long __user start,
+ unsigned long __user end)
{
struct flush_icache_range_args args;
@@ -525,6 +537,7 @@
args.end = end;
on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+ instruction_hazard();
}
/*
@@ -613,7 +626,7 @@
BUG_ON(size == 0);
if (cpu_has_subset_pcaches) {
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
+ unsigned long sc_lsize = cpu_scache_line_size();
if (size >= scache_size) {
r4k_blast_scache();
@@ -639,7 +652,7 @@
if (size >= dcache_size) {
r4k_blast_dcache();
} else {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+ unsigned long dc_lsize = cpu_dcache_line_size();
R4600_HIT_CACHEOP_WAR_IMPL;
a = addr & ~(dc_lsize - 1);
@@ -663,7 +676,7 @@
BUG_ON(size == 0);
if (cpu_has_subset_pcaches) {
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
+ unsigned long sc_lsize = cpu_scache_line_size();
if (size >= scache_size) {
r4k_blast_scache();
@@ -684,7 +697,7 @@
if (size >= dcache_size) {
r4k_blast_dcache();
} else {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+ unsigned long dc_lsize = cpu_dcache_line_size();
R4600_HIT_CACHEOP_WAR_IMPL;
a = addr & ~(dc_lsize - 1);
@@ -708,9 +721,9 @@
*/
static void local_r4k_flush_cache_sigtramp(void * arg)
{
- unsigned long ic_lsize = current_cpu_data.icache.linesz;
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
+ unsigned long ic_lsize = cpu_icache_line_size();
+ unsigned long dc_lsize = cpu_dcache_line_size();
+ unsigned long sc_lsize = cpu_scache_line_size();
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
@@ -762,6 +775,7 @@
for (addr = INDEX_BASE; addr <= INDEX_BASE + 4096; addr += ic_lsize) {
__asm__ __volatile__ (
+ ".set push\n\t"
".set noreorder\n\t"
".set mips3\n\t"
"cache\t%1, 0(%0)\n\t"
@@ -776,8 +790,7 @@
"cache\t%1, 0x1000(%0)\n\t"
"cache\t%1, 0x2000(%0)\n\t"
"cache\t%1, 0x3000(%0)\n\t"
- ".set\tmips0\n\t"
- ".set\treorder\n\t"
+ ".set pop\n"
:
: "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill));
}
@@ -1011,9 +1024,19 @@
* normally they'd suffer from aliases but magic in the hardware deals
* with that for us so we don't need to take care ourselves.
*/
- if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000)
- if (c->dcache.waysize > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
+ switch (c->cputype) {
+ case CPU_20KC:
+ case CPU_25KF:
+ case CPU_R10000:
+ case CPU_R12000:
+ case CPU_SB1:
+ break;
+ case CPU_24K:
+ if (!(read_c0_config7() & (1 << 16)))
+ default:
+ if (c->dcache.waysize > PAGE_SIZE)
+ c->dcache.flags |= MIPS_CACHE_ALIASES;
+ }
switch (c->cputype) {
case CPU_20KC:
@@ -1024,7 +1047,11 @@
c->icache.flags |= MIPS_CACHE_VTAG;
break;
+ case CPU_AU1000:
case CPU_AU1500:
+ case CPU_AU1100:
+ case CPU_AU1550:
+ case CPU_AU1200:
c->icache.flags |= MIPS_CACHE_IC_F_DC;
break;
}
@@ -1102,7 +1129,6 @@
return 1;
}
-typedef int (*probe_func_t)(unsigned long);
extern int r5k_sc_init(void);
extern int rm7k_sc_init(void);
@@ -1110,7 +1136,6 @@
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int config = read_c0_config();
- probe_func_t probe_scache_kseg1;
int sc_present = 0;
/*
@@ -1123,8 +1148,7 @@
case CPU_R4000MC:
case CPU_R4400SC:
case CPU_R4400MC:
- probe_scache_kseg1 = (probe_func_t) (CKSEG1ADDR(&probe_scache));
- sc_present = probe_scache_kseg1(config);
+ sc_present = run_uncached(probe_scache);
if (sc_present)
c->options |= MIPS_CPU_CACHE_CDEX_S;
break;
@@ -1198,7 +1222,7 @@
}
}
-void __init ld_mmu_r4xx0(void)
+void __init r4k_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
@@ -1206,15 +1230,11 @@
struct cpuinfo_mips *c = ¤t_cpu_data;
/* Default cache error handler for R4000 and R5000 family */
- memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x80);
- memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_generic, 0x80);
+ set_uncached_handler (0x100, &except_vec2_generic, 0x80);
probe_pcache();
setup_scache();
- if (c->dcache.sets * c->dcache.ways > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
-
r4k_blast_dcache_page_setup();
r4k_blast_dcache_page_indexed_setup();
r4k_blast_dcache_setup();
@@ -1252,9 +1272,8 @@
_dma_cache_inv = r4k_dma_cache_inv;
#endif
- __flush_cache_all();
- coherency_setup();
-
build_clear_page();
build_copy_page();
+ local_r4k___flush_cache_all(NULL);
+ coherency_setup();
}
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index 502f68c..2f08b53 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -235,7 +235,7 @@
/*
* Invalidate all caches on this CPU
*/
-static void local_sb1___flush_cache_all(void)
+static void __attribute_used__ local_sb1___flush_cache_all(void)
{
__sb1_writeback_inv_dcache_all();
__sb1_flush_icache_all();
@@ -492,19 +492,17 @@
}
/*
- * This is called from loadmmu.c. We have to set up all the
+ * This is called from cache.c. We have to set up all the
* memory management function pointers, as well as initialize
* the caches and tlbs
*/
-void ld_mmu_sb1(void)
+void sb1_cache_init(void)
{
extern char except_vec2_sb1;
extern char handle_vec2_sb1;
/* Special cache error handler for SB1 */
- memcpy((void *)(CAC_BASE + 0x100), &except_vec2_sb1, 0x80);
- memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_sb1, 0x80);
- memcpy((void *)CKSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80);
+ set_uncached_handler (0x100, &except_vec2_sb1, 0x80);
probe_cache_sizes();
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index ff5afab..0a97a94 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -167,15 +167,16 @@
static void tx39_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- struct mm_struct *mm = vma->vm_mm;
+ int exec;
- if (!cpu_has_dc_aliases)
+ if (!(cpu_context(smp_processor_id(), vma->vm_mm)))
return;
- if (cpu_context(smp_processor_id(), mm) != 0) {
+ exec = vma->vm_flags & VM_EXEC;
+ if (cpu_has_dc_aliases || exec)
tx39_blast_dcache();
+ if (exec)
tx39_blast_icache();
- }
}
static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
@@ -183,6 +184,7 @@
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
@@ -195,7 +197,8 @@
page &= PAGE_MASK;
pgdp = pgd_offset(mm, page);
- pmdp = pmd_offset(pgdp, page);
+ pudp = pud_offset(pgdp, page);
+ pmdp = pmd_offset(pudp, page);
ptep = pte_offset(pmdp, page);
/*
@@ -407,7 +410,7 @@
}
}
-void __init ld_mmu_tx39(void)
+void __init tx39_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
@@ -490,4 +493,5 @@
build_clear_page();
build_copy_page();
+ tx39h_flush_icache_all();
}
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 1d95cdb..314701a 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -23,8 +23,10 @@
void (*flush_cache_mm)(struct mm_struct *mm);
void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
-void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
-void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
+ unsigned long pfn);
+void (*flush_icache_range)(unsigned long __user start,
+ unsigned long __user end);
void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page);
/* MIPS specific cache operations */
@@ -32,6 +34,8 @@
void (*flush_data_cache_page)(unsigned long addr);
void (*flush_icache_all)(void);
+EXPORT_SYMBOL(flush_data_cache_page);
+
#ifdef CONFIG_DMA_NONCOHERENT
/* DMA cache operations. */
@@ -49,10 +53,12 @@
* We could optimize the case where the cache argument is not BCACHE but
* that seems very atypical use ...
*/
-asmlinkage int sys_cacheflush(unsigned long addr, unsigned long int bytes,
- unsigned int cache)
+asmlinkage int sys_cacheflush(unsigned long __user addr,
+ unsigned long bytes, unsigned int cache)
{
- if (!access_ok(VERIFY_WRITE, (void *) addr, bytes))
+ if (bytes == 0)
+ return 0;
+ if (!access_ok(VERIFY_WRITE, (void __user *) addr, bytes))
return -EFAULT;
flush_icache_range(addr, addr + bytes);
@@ -100,58 +106,48 @@
}
}
-extern void ld_mmu_r23000(void);
-extern void ld_mmu_r4xx0(void);
-extern void ld_mmu_tx39(void);
-extern void ld_mmu_r6000(void);
-extern void ld_mmu_tfp(void);
-extern void ld_mmu_andes(void);
-extern void ld_mmu_sb1(void);
+#define __weak __attribute__((weak))
+
+static char cache_panic[] __initdata = "Yeee, unsupported cache architecture.";
void __init cpu_cache_init(void)
{
- if (cpu_has_4ktlb) {
-#if defined(CONFIG_CPU_R4X00) || defined(CONFIG_CPU_VR41XX) || \
- defined(CONFIG_CPU_R4300) || defined(CONFIG_CPU_R5000) || \
- defined(CONFIG_CPU_NEVADA) || defined(CONFIG_CPU_R5432) || \
- defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_MIPS32) || \
- defined(CONFIG_CPU_MIPS64) || defined(CONFIG_CPU_TX49XX) || \
- defined(CONFIG_CPU_RM7000) || defined(CONFIG_CPU_RM9000)
- ld_mmu_r4xx0();
-#endif
- } else switch (current_cpu_data.cputype) {
-#ifdef CONFIG_CPU_R3000
- case CPU_R2000:
- case CPU_R3000:
- case CPU_R3000A:
- case CPU_R3081E:
- ld_mmu_r23000();
- break;
-#endif
-#ifdef CONFIG_CPU_TX39XX
- case CPU_TX3912:
- case CPU_TX3922:
- case CPU_TX3927:
- ld_mmu_tx39();
- break;
-#endif
-#ifdef CONFIG_CPU_R10000
- case CPU_R10000:
- case CPU_R12000:
- ld_mmu_r4xx0();
- break;
-#endif
-#ifdef CONFIG_CPU_SB1
- case CPU_SB1:
- ld_mmu_sb1();
- break;
-#endif
+ if (cpu_has_3k_cache) {
+ extern void __weak r3k_cache_init(void);
- case CPU_R8000:
- panic("R8000 is unsupported");
- break;
-
- default:
- panic("Yeee, unsupported cache architecture.");
+ r3k_cache_init();
+ return;
}
+ if (cpu_has_6k_cache) {
+ extern void __weak r6k_cache_init(void);
+
+ r6k_cache_init();
+ return;
+ }
+ if (cpu_has_4k_cache) {
+ extern void __weak r4k_cache_init(void);
+
+ r4k_cache_init();
+ return;
+ }
+ if (cpu_has_8k_cache) {
+ extern void __weak r8k_cache_init(void);
+
+ r8k_cache_init();
+ return;
+ }
+ if (cpu_has_tx39_cache) {
+ extern void __weak tx39_cache_init(void);
+
+ tx39_cache_init();
+ return;
+ }
+ if (cpu_has_sb1_cache) {
+ extern void __weak sb1_cache_init(void);
+
+ sb1_cache_init();
+ return;
+ }
+
+ panic(cache_panic);
}
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index 7166ffe..1cf3c60 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -19,13 +19,19 @@
#include <linux/sched.h>
#include <asm/mipsregs.h>
#include <asm/sibyte/sb1250.h>
-
-#ifndef CONFIG_SIBYTE_BUS_WATCHER
-#include <asm/io.h>
#include <asm/sibyte/sb1250_regs.h>
+
+#if !defined(CONFIG_SIBYTE_BUS_WATCHER) || defined(CONFIG_SIBYTE_BW_TRACE)
+#include <asm/io.h>
#include <asm/sibyte/sb1250_scd.h>
#endif
+/*
+ * We'd like to dump the L2_ECC_TAG register on errors, but errata make
+ * that unsafe... So for now we don't. (BCM1250/BCM112x erratum SOC-48.)
+ */
+#undef DUMP_L2_ECC_TAG_ON_ERROR
+
/* SB1 definitions */
/* XXX should come from config1 XXX */
@@ -139,12 +145,18 @@
static void check_bus_watcher(void)
{
uint32_t status, l2_err, memio_err;
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ uint64_t l2_tag;
+#endif
/* Destructive read, clears register and interrupt */
status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
/* Bit 31 is always on, but there's no #define for that */
if (status & ~(1UL << 31)) {
l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+#endif
memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
prom_printf("\nLast recorded signature:\n");
@@ -153,6 +165,9 @@
(int)(G_SCD_BERR_TID(status) >> 6),
(int)G_SCD_BERR_RID(status),
(int)G_SCD_BERR_DCODE(status));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ prom_printf("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
+#endif
} else {
prom_printf("Bus watcher indicates no error\n");
}
@@ -166,6 +181,16 @@
uint64_t cerr_dpa;
uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res;
+#ifdef CONFIG_SIBYTE_BW_TRACE
+ /* Freeze the trace buffer now */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#else
+ csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#endif
+ prom_printf("Trace buffer frozen\n");
+#endif
+
prom_printf("Cache error exception on CPU %x:\n",
(read_c0_prid() >> 25) & 0x7);
@@ -229,11 +254,19 @@
check_bus_watcher();
- while (1);
/*
- * This tends to make things get really ugly; let's just stall instead.
- * panic("Can't handle the cache error!");
+ * Calling panic() when a fatal cache error occurs scrambles the
+ * state of the system (and the cache), making it difficult to
+ * investigate after the fact. However, if you just stall the CPU,
+ * the other CPU may keep on running, which is typically very
+ * undesirable.
*/
+#ifdef CONFIG_SB1_CERR_STALL
+ while (1)
+ ;
+#else
+ panic("unhandled cache error");
+#endif
}
@@ -434,7 +467,8 @@
};
#define DC_TAG_VALID(state) \
- (((state) == 0xf) || ((state) == 0x13) || ((state) == 0x19) || ((state == 0x16)) || ((state) == 0x1c))
+ (((state) == 0x0) || ((state) == 0xf) || ((state) == 0x13) || \
+ ((state) == 0x19) || ((state) == 0x16) || ((state) == 0x1c))
static char *dc_state_str(unsigned char state)
{
@@ -505,6 +539,7 @@
uint64_t datalo;
uint32_t datalohi, datalolo, datahi;
int offset;
+ char bad_ecc = 0;
for (offset = 0; offset < 4; offset++) {
/* Index-load-data-D */
@@ -525,8 +560,7 @@
ecc = dc_ecc(datalo);
if (ecc != datahi) {
int bits = 0;
- prom_printf(" ** bad ECC (%02x %02x) ->",
- datahi, ecc);
+ bad_ecc |= 1 << (3-offset);
ecc ^= datahi;
while (ecc) {
if (ecc & 1) bits++;
@@ -537,6 +571,10 @@
prom_printf(" %02X-%016llX", datahi, datalo);
}
prom_printf("\n");
+ if (bad_ecc)
+ prom_printf(" dwords w/ bad ECC: %d %d %d %d\n",
+ !!(bad_ecc & 8), !!(bad_ecc & 4),
+ !!(bad_ecc & 2), !!(bad_ecc & 1));
}
}
return res;
diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S
index 2c3a23a..0e71580 100644
--- a/arch/mips/mm/cex-sb1.S
+++ b/arch/mips/mm/cex-sb1.S
@@ -64,6 +64,10 @@
sd k0,0x170($0)
sd k1,0x178($0)
+#if CONFIG_SB1_CEX_ALWAYS_FATAL
+ j handle_vec2_sb1
+ nop
+#else
/*
* M_ERRCTL_RECOVERABLE is bit 31, which makes it easy to tell
* if we can fast-path out of here for a h/w-recovered error.
@@ -134,6 +138,7 @@
/* Unrecoverable Icache or Dcache error; log it and/or fail */
j handle_vec2_sb1
nop
+#endif
END(except_vec2_sb1)
diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c
index 97a50d3..f6b3c72 100644
--- a/arch/mips/mm/dma-coherent.c
+++ b/arch/mips/mm/dma-coherent.c
@@ -9,16 +9,16 @@
*/
#include <linux/config.h>
#include <linux/types.h>
+#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/string.h>
-#include <linux/pci.h>
#include <asm/cache.h>
#include <asm/io.h>
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
/* ignore region specifiers */
@@ -39,7 +39,7 @@
EXPORT_SYMBOL(dma_alloc_noncoherent);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
__attribute__((alias("dma_alloc_noncoherent")));
EXPORT_SYMBOL(dma_alloc_coherent);
diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c
index aa7c94b..8da19fd 100644
--- a/arch/mips/mm/dma-ip27.c
+++ b/arch/mips/mm/dma-ip27.c
@@ -22,7 +22,7 @@
pdev_to_baddr(to_pci_dev(dev), (addr))
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
@@ -44,7 +44,7 @@
EXPORT_SYMBOL(dma_alloc_noncoherent);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
__attribute__((alias("dma_alloc_noncoherent")));
EXPORT_SYMBOL(dma_alloc_coherent);
diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c
index 2cbe196..a7e3072 100644
--- a/arch/mips/mm/dma-ip32.c
+++ b/arch/mips/mm/dma-ip32.c
@@ -37,7 +37,7 @@
#define RAM_OFFSET_MASK 0x3fffffff
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
/* ignore region specifiers */
@@ -61,7 +61,7 @@
EXPORT_SYMBOL(dma_alloc_noncoherent);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index 59e54f1..cd4ea84 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -24,7 +24,7 @@
*/
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
/* ignore region specifiers */
@@ -45,7 +45,7 @@
EXPORT_SYMBOL(dma_alloc_noncoherent);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
@@ -105,22 +105,7 @@
{
unsigned long addr = (unsigned long) ptr;
- switch (direction) {
- case DMA_TO_DEVICE:
- dma_cache_wback(addr, size);
- break;
-
- case DMA_FROM_DEVICE:
- dma_cache_inv(addr, size);
- break;
-
- case DMA_BIDIRECTIONAL:
- dma_cache_wback_inv(addr, size);
- break;
-
- default:
- BUG();
- }
+ __dma_sync(addr, size, direction);
return virt_to_phys(ptr);
}
@@ -133,22 +118,7 @@
unsigned long addr;
addr = dma_addr + PAGE_OFFSET;
- switch (direction) {
- case DMA_TO_DEVICE:
- //dma_cache_wback(addr, size);
- break;
-
- case DMA_FROM_DEVICE:
- //dma_cache_inv(addr, size);
- break;
-
- case DMA_BIDIRECTIONAL:
- //dma_cache_wback_inv(addr, size);
- break;
-
- default:
- BUG();
- }
+ //__dma_sync(addr, size, direction);
}
EXPORT_SYMBOL(dma_unmap_single);
@@ -164,10 +134,11 @@
unsigned long addr;
addr = (unsigned long) page_address(sg->page);
- if (addr)
+ if (addr) {
__dma_sync(addr + sg->offset, sg->length, direction);
- sg->dma_address = (dma_addr_t)
- (page_to_phys(sg->page) + sg->offset);
+ sg->dma_address = (dma_addr_t)page_to_phys(sg->page)
+ + sg->offset;
+ }
}
return nents;
@@ -218,9 +189,8 @@
for (i = 0; i < nhwentries; i++, sg++) {
addr = (unsigned long) page_address(sg->page);
- if (!addr)
- continue;
- dma_cache_wback_inv(addr + sg->offset, sg->length);
+ if (addr)
+ __dma_sync(addr + sg->offset, sg->length, direction);
}
}
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index ec8077c..2d9624f 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -25,6 +25,7 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
+#include <asm/highmem.h> /* For VMALLOC_END */
/*
* This routine handles page faults. It determines the address,
@@ -57,7 +58,7 @@
* only copy the information from the master page table,
* nothing more.
*/
- if (unlikely(address >= VMALLOC_START))
+ if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
goto vmalloc_fault;
/*
@@ -140,7 +141,7 @@
info.si_signo = SIGSEGV;
info.si_errno = 0;
/* info.si_code has been set above */
- info.si_addr = (void *) address;
+ info.si_addr = (void __user *) address;
force_sig_info(SIGSEGV, &info, tsk);
return;
}
@@ -196,7 +197,7 @@
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_ADRERR;
- info.si_addr = (void *) address;
+ info.si_addr = (void __user *) address;
force_sig_info(SIGBUS, &info, tsk);
return;
@@ -212,6 +213,7 @@
*/
int offset = __pgd_offset(address);
pgd_t *pgd, *pgd_k;
+ pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pte_t *pte_k;
@@ -222,8 +224,13 @@
goto no_context;
set_pgd(pgd, *pgd_k);
- pmd = pmd_offset(pgd, address);
- pmd_k = pmd_offset(pgd_k, address);
+ pud = pud_offset(pgd, address);
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+
+ pmd = pmd_offset(pud, address);
+ pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
goto no_context;
set_pmd(pmd, *pmd_k);
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index dd5e2e3..1f7b37b 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -83,6 +83,25 @@
preempt_check_resched();
}
+/*
+ * This is the same as kmap_atomic() but can map memory that doesn't
+ * have a struct page associated with it.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+
+ inc_preempt_count();
+
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+ flush_tlb_one(vaddr);
+
+ return (void*) vaddr;
+}
+
struct page *__kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long)ptr;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index dc6830b..f75ab74 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -83,7 +83,7 @@
pgprot_t kmap_prot;
#define kmap_get_fixmap_pte(vaddr) \
- pte_offset_kernel(pmd_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr))
+ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
static void __init kmap_init(void)
{
@@ -96,36 +96,42 @@
kmap_prot = PAGE_KERNEL;
}
-#ifdef CONFIG_64BIT
-static void __init fixrange_init(unsigned long start, unsigned long end,
+#ifdef CONFIG_32BIT
+void __init fixrange_init(unsigned long start, unsigned long end,
pgd_t *pgd_base)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
- int i, j;
+ int i, j, k;
unsigned long vaddr;
vaddr = start;
i = __pgd_offset(vaddr);
- j = __pmd_offset(vaddr);
+ j = __pud_offset(vaddr);
+ k = __pmd_offset(vaddr);
pgd = pgd_base + i;
for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
- pmd = (pmd_t *)pgd;
- for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
- if (pmd_none(*pmd)) {
- pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
- set_pmd(pmd, __pmd(pte));
- if (pte != pte_offset_kernel(pmd, 0))
- BUG();
+ pud = (pud_t *)pgd;
+ for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+ pmd = (pmd_t *)pud;
+ for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
+ if (pmd_none(*pmd)) {
+ pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+ set_pmd(pmd, __pmd(pte));
+ if (pte != pte_offset_kernel(pmd, 0))
+ BUG();
+ }
+ vaddr += PMD_SIZE;
}
- vaddr += PMD_SIZE;
+ k = 0;
}
j = 0;
}
}
-#endif /* CONFIG_64BIT */
+#endif /* CONFIG_32BIT */
#endif /* CONFIG_HIGHMEM */
#ifndef CONFIG_NEED_MULTIPLE_NODES
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index adf3522..3101d1d 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -55,7 +55,7 @@
if (address >= end)
BUG();
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -77,11 +77,15 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
+ pud_t *pud;
pmd_t *pmd;
- pmd = pmd_alloc(&init_mm, dir, address);
+
error = -ENOMEM;
+ pud = pud_alloc(&init_mm, dir, address);
+ if (!pud)
+ break;
+ pmd = pmd_alloc(&init_mm, pud, address);
if (!pmd)
break;
if (remap_area_pmd(pmd, address, end - address,
@@ -91,21 +95,11 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return error;
}
/*
- * Allow physical addresses to be fixed up to help 36 bit peripherals.
- */
-phys_t __attribute__ ((weak))
-fixup_bigphys_addr(phys_t phys_addr, phys_t size)
-{
- return phys_addr;
-}
-
-/*
* Generic mapping function (not visible outside):
*/
@@ -121,7 +115,7 @@
#define IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
-void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
+void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
{
struct vm_struct * area;
unsigned long offset;
@@ -141,7 +135,7 @@
*/
if (IS_LOW512(phys_addr) && IS_LOW512(last_addr) &&
flags == _CACHE_UNCACHED)
- return (void *) KSEG1ADDR(phys_addr);
+ return (void __iomem *) CKSEG1ADDR(phys_addr);
/*
* Don't allow anybody to remap normal RAM that we're using..
@@ -177,10 +171,10 @@
return NULL;
}
- return (void *) (offset + (char *)addr);
+ return (void __iomem *) (offset + (char *)addr);
}
-#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == KSEG1)
+#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
void __iounmap(volatile void __iomem *addr)
{
@@ -190,10 +184,8 @@
return;
p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
- if (!p) {
+ if (!p)
printk(KERN_ERR "iounmap: bad address %p\n", addr);
- return;
- }
kfree(p);
}
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index 9f8b165..f51e180 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -25,7 +25,10 @@
#include <asm/cpu.h>
#include <asm/war.h>
-#define half_scache_line_size() (cpu_scache_line_size() >> 1)
+#define half_scache_line_size() (cpu_scache_line_size() >> 1)
+#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
+
/*
* Maximum sizes:
@@ -198,15 +201,15 @@
if (store_offset & (cpu_dcache_line_size() - 1))
return;
- if (R4600_V1_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2010)) {
+ if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
build_nop();
build_nop();
build_nop();
build_nop();
}
- if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
- build_insn_word(0x8c200000); /* lw $zero, ($at) */
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ build_insn_word(0x3c01a000); /* lui $at, 0xa000 */
mi.c_format.opcode = cache_op;
mi.c_format.rs = 4; /* $a0 */
@@ -361,7 +364,7 @@
build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_clear : 0));
- if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
build_insn_word(0x3c01a000); /* lui $at, 0xa000 */
dest = label();
@@ -404,9 +407,6 @@
build_jr_ra();
- flush_icache_range((unsigned long)&clear_page_array,
- (unsigned long) epc);
-
BUG_ON(epc > clear_page_array + ARRAY_SIZE(clear_page_array));
}
@@ -420,7 +420,7 @@
build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_copy : 0));
- if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
build_insn_word(0x3c01a000); /* lui $at, 0xa000 */
dest = label();
@@ -482,8 +482,5 @@
build_jr_ra();
- flush_icache_range((unsigned long)©_page_array,
- (unsigned long) epc);
-
BUG_ON(epc > copy_page_array + ARRAY_SIZE(copy_page_array));
}
diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index 1b6df71..148c65b 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -60,7 +60,8 @@
" .set noreorder \n"
#ifdef CONFIG_CPU_HAS_PREFETCH
" daddiu %0, %0, 128 \n"
- " pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%0) \n" /* Prefetch the first 4 lines */
+ " pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%0) \n"
+ /* Prefetch the first 4 lines */
" pref " SB1_PREF_STORE_STREAMED_HINT ", -96(%0) \n"
" pref " SB1_PREF_STORE_STREAMED_HINT ", -64(%0) \n"
" pref " SB1_PREF_STORE_STREAMED_HINT ", -32(%0) \n"
@@ -106,7 +107,8 @@
#ifdef CONFIG_CPU_HAS_PREFETCH
" daddiu %0, %0, 128 \n"
" daddiu %1, %1, 128 \n"
- " pref " SB1_PREF_LOAD_STREAMED_HINT ", -128(%0)\n" /* Prefetch the first 4 lines */
+ " pref " SB1_PREF_LOAD_STREAMED_HINT ", -128(%0)\n"
+ /* Prefetch the first 4 lines */
" pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%1)\n"
" pref " SB1_PREF_LOAD_STREAMED_HINT ", -96(%0)\n"
" pref " SB1_PREF_STORE_STREAMED_HINT ", -96(%1)\n"
@@ -207,66 +209,73 @@
u64 pad_b;
} dmadscr_t;
-static dmadscr_t page_descr[NR_CPUS] __attribute__((aligned(SMP_CACHE_BYTES)));
+static dmadscr_t page_descr[DM_NUM_CHANNELS]
+ __attribute__((aligned(SMP_CACHE_BYTES)));
void sb1_dma_init(void)
{
- int cpu = smp_processor_id();
- u64 base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1);
+ int i;
- bus_writeq(base_val,
- (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
- bus_writeq(base_val | M_DM_DSCR_BASE_RESET,
- (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
- bus_writeq(base_val | M_DM_DSCR_BASE_ENABL,
- (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+ for (i = 0; i < DM_NUM_CHANNELS; i++) {
+ const u64 base_val = CPHYSADDR(&page_descr[i]) |
+ V_DM_DSCR_BASE_RINGSZ(1);
+ volatile void *base_reg =
+ IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
+
+ __raw_writeq(base_val, base_reg);
+ __raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg);
+ __raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, base_reg);
+ }
}
void clear_page(void *page)
{
- int cpu = smp_processor_id();
+ u64 to_phys = CPHYSADDR(page);
+ unsigned int cpu = smp_processor_id();
- /* if the page is above Kseg0, use old way */
+ /* if the page is not in KSEG0, use old way */
if ((long)KSEGX(page) != (long)CKSEG0)
return clear_page_cpu(page);
- page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
+ page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM |
+ M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
- bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+ __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
/*
* Don't really want to do it this way, but there's no
* reliable way to delay completion detection.
*/
- while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
- M_DM_DSCR_BASE_INTERRUPT))))
+ while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+ & M_DM_DSCR_BASE_INTERRUPT))
;
- bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+ __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
}
void copy_page(void *to, void *from)
{
- unsigned long from_phys = CPHYSADDR(from);
- unsigned long to_phys = CPHYSADDR(to);
- int cpu = smp_processor_id();
+ u64 from_phys = CPHYSADDR(from);
+ u64 to_phys = CPHYSADDR(to);
+ unsigned int cpu = smp_processor_id();
- /* if either page is above Kseg0, use old way */
+ /* if any page is not in KSEG0, use old way */
if ((long)KSEGX(to) != (long)CKSEG0
|| (long)KSEGX(from) != (long)CKSEG0)
return copy_page_cpu(to, from);
- page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
- page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
- bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+ page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST |
+ M_DM_DSCRA_INTERRUPT;
+ page_descr[cpu].dscr_b = from_phys | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
+ __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
/*
* Don't really want to do it this way, but there's no
* reliable way to delay completion detection.
*/
- while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
- M_DM_DSCR_BASE_INTERRUPT))))
+ while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+ & M_DM_DSCR_BASE_INTERRUPT))
;
- bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+ __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
}
#else /* !CONFIG_SIBYTE_DMA_PAGEOPS */
diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c
index 4f07f81..4a3c491 100644
--- a/arch/mips/mm/pgtable-32.c
+++ b/arch/mips/mm/pgtable-32.c
@@ -10,6 +10,7 @@
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
+#include <asm/fixmap.h>
#include <asm/pgtable.h>
void pgd_init(unsigned long page)
@@ -29,42 +30,12 @@
}
}
-#ifdef CONFIG_HIGHMEM
-static void __init fixrange_init (unsigned long start, unsigned long end,
- pgd_t *pgd_base)
-{
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *pte;
- int i, j;
- unsigned long vaddr;
-
- vaddr = start;
- i = __pgd_offset(vaddr);
- j = __pmd_offset(vaddr);
- pgd = pgd_base + i;
-
- for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
- pmd = (pmd_t *)pgd;
- for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
- if (pmd_none(*pmd)) {
- pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
- set_pmd(pmd, __pmd((unsigned long)pte));
- if (pte != pte_offset_kernel(pmd, 0))
- BUG();
- }
- vaddr += PMD_SIZE;
- }
- j = 0;
- }
-}
-#endif
-
void __init pagetable_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long vaddr;
pgd_t *pgd, *pgd_base;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
#endif
@@ -90,7 +61,8 @@
fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
pgd = swapper_pg_dir + __pgd_offset(vaddr);
- pmd = pmd_offset(pgd, vaddr);
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
pte = pte_offset_kernel(pmd, vaddr);
pkmap_page_table = pte;
#endif
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index 4e92f93..9e8ff8b 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -15,6 +15,7 @@
#include <asm/cacheops.h>
#include <asm/mipsregs.h>
#include <asm/processor.h>
+#include <asm/cacheflush.h> /* for run_uncached() */
/* Primary cache parameters. */
#define sc_lsize 32
@@ -96,25 +97,13 @@
}
/*
- * This function is executed in the uncached segment CKSEG1.
- * It must not touch the stack, because the stack pointer still points
- * into CKSEG0.
- *
- * Three options:
- * - Write it in assembly and guarantee that we don't use the stack.
- * - Disable caching for CKSEG0 before calling it.
- * - Pray that GCC doesn't randomly start using the stack.
- *
- * This being Linux, we obviously take the least sane of those options -
- * following DaveM's lead in c-r4k.c
- *
- * It seems we get our kicks from relying on unguaranteed behaviour in GCC
+ * This function is executed in uncached address space.
*/
static __init void __rm7k_sc_enable(void)
{
int i;
- set_c0_config(1 << 3); /* CONF_SE */
+ set_c0_config(RM7K_CONF_SE);
write_c0_taglo(0);
write_c0_taghi(0);
@@ -127,24 +116,22 @@
".set mips0\n\t"
".set reorder"
:
- : "r" (KSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
+ : "r" (CKSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
}
}
static __init void rm7k_sc_enable(void)
{
- void (*func)(void) = (void *) KSEG1ADDR(&__rm7k_sc_enable);
-
- if (read_c0_config() & 0x08) /* CONF_SE */
+ if (read_c0_config() & RM7K_CONF_SE)
return;
- printk(KERN_INFO "Enabling secondary cache...");
- func();
+ printk(KERN_INFO "Enabling secondary cache...\n");
+ run_uncached(__rm7k_sc_enable);
}
static void rm7k_sc_disable(void)
{
- clear_c0_config(1<<3); /* CONF_SE */
+ clear_c0_config(RM7K_CONF_SE);
}
struct bcache_ops rm7k_sc_ops = {
@@ -158,19 +145,19 @@
{
unsigned int config = read_c0_config();
- if ((config >> 31) & 1) /* Bit 31 set -> no S-Cache */
+ if ((config & RM7K_CONF_SC))
return;
printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
(scache_size >> 10), sc_lsize);
- if (!((config >> 3) & 1)) /* CONF_SE */
+ if (!(config & RM7K_CONF_SE))
rm7k_sc_enable();
/*
* While we're at it let's deal with the tertiary cache.
*/
- if (!((config >> 17) & 1)) {
+ if (!(config & RM7K_CONF_TC)) {
/*
* We can't enable the L3 cache yet. There may be board-specific
@@ -183,9 +170,9 @@
* to probe it.
*/
printk(KERN_INFO "Tertiary cache present, %s enabled\n",
- config&(1<<12) ? "already" : "not (yet)");
+ (config & RM7K_CONF_TE) ? "already" : "not (yet)");
- if ((config >> 12) & 1)
+ if ((config & RM7K_CONF_TE))
rm7k_tcache_enabled = 1;
}
diff --git a/arch/mips/mm/tlb-andes.c b/arch/mips/mm/tlb-andes.c
index 167e08e..3f422a8 100644
--- a/arch/mips/mm/tlb-andes.c
+++ b/arch/mips/mm/tlb-andes.c
@@ -195,6 +195,7 @@
{
unsigned long flags;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
int idx, pid;
@@ -220,7 +221,8 @@
write_c0_entryhi(address | (pid));
pgdp = pgd_offset(vma->vm_mm, address);
tlb_probe();
- pmdp = pmd_offset(pgdp, address);
+ pudp = pud_offset(pgdp, address);
+ pmdp = pmd_offset(pudp, address);
idx = read_c0_index();
ptep = pte_offset_map(pmdp, address);
write_c0_entrylo0(pte_val(*ptep++) >> 6);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 59d38bc..8297970 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -21,6 +21,12 @@
extern void build_tlb_refill_handler(void);
+/*
+ * Make sure all entries differ. If they're not different
+ * MIPS32 will take revenge ...
+ */
+#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
+
/* CP0 hazard avoidance. */
#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
"nop; nop; nop; nop; nop; nop;\n\t" \
@@ -42,11 +48,8 @@
/* Blast 'em all away. */
while (entry < current_cpu_data.tlbsize) {
- /*
- * Make sure all entries differ. If they're not different
- * MIPS32 will take revenge ...
- */
- write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
+ /* Make sure all entries differ. */
+ write_c0_entryhi(UNIQUE_ENTRYHI(entry));
write_c0_index(entry);
mtc0_tlbw_hazard();
tlb_write_indexed();
@@ -57,12 +60,21 @@
local_irq_restore(flags);
}
+/* All entries common to a mm share an asid. To effectively flush
+ these entries, we just bump the asid. */
void local_flush_tlb_mm(struct mm_struct *mm)
{
- int cpu = smp_processor_id();
+ int cpu;
- if (cpu_context(cpu, mm) != 0)
- drop_mmu_context(mm,cpu);
+ preempt_disable();
+
+ cpu = smp_processor_id();
+
+ if (cpu_context(cpu, mm) != 0) {
+ drop_mmu_context(mm, cpu);
+ }
+
+ preempt_enable();
}
void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
@@ -75,9 +87,9 @@
unsigned long flags;
int size;
- local_irq_save(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
+ local_irq_save(flags);
if (size <= current_cpu_data.tlbsize/2) {
int oldpid = read_c0_entryhi();
int newpid = cpu_asid(cpu, mm);
@@ -99,8 +111,7 @@
if (idx < 0)
continue;
/* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0 +
- (idx << (PAGE_SHIFT + 1)));
+ write_c0_entryhi(UNIQUE_ENTRYHI(idx));
mtc0_tlbw_hazard();
tlb_write_indexed();
}
@@ -118,9 +129,9 @@
unsigned long flags;
int size;
- local_irq_save(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
+ local_irq_save(flags);
if (size <= current_cpu_data.tlbsize / 2) {
int pid = read_c0_entryhi();
@@ -142,7 +153,7 @@
if (idx < 0)
continue;
/* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+ write_c0_entryhi(UNIQUE_ENTRYHI(idx));
mtc0_tlbw_hazard();
tlb_write_indexed();
}
@@ -176,7 +187,7 @@
if (idx < 0)
goto finish;
/* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+ write_c0_entryhi(UNIQUE_ENTRYHI(idx));
mtc0_tlbw_hazard();
tlb_write_indexed();
tlbw_use_hazard();
@@ -197,8 +208,8 @@
int oldpid, idx;
local_irq_save(flags);
- page &= (PAGE_MASK << 1);
oldpid = read_c0_entryhi();
+ page &= (PAGE_MASK << 1);
write_c0_entryhi(page);
mtc0_tlbw_hazard();
tlb_probe();
@@ -208,7 +219,7 @@
write_c0_entrylo1(0);
if (idx >= 0) {
/* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+ write_c0_entryhi(UNIQUE_ENTRYHI(idx));
mtc0_tlbw_hazard();
tlb_write_indexed();
tlbw_use_hazard();
@@ -227,6 +238,7 @@
{
unsigned long flags;
pgd_t *pgdp;
+ pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
int idx, pid;
@@ -237,35 +249,34 @@
if (current->active_mm != vma->vm_mm)
return;
- pid = read_c0_entryhi() & ASID_MASK;
-
local_irq_save(flags);
+
+ pid = read_c0_entryhi() & ASID_MASK;
address &= (PAGE_MASK << 1);
write_c0_entryhi(address | pid);
pgdp = pgd_offset(vma->vm_mm, address);
mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
- pmdp = pmd_offset(pgdp, address);
+ pudp = pud_offset(pgdp, address);
+ pmdp = pmd_offset(pudp, address);
idx = read_c0_index();
ptep = pte_offset_map(pmdp, address);
- #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
- write_c0_entrylo0(ptep->pte_high);
- ptep++;
- write_c0_entrylo1(ptep->pte_high);
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+ write_c0_entrylo0(ptep->pte_high);
+ ptep++;
+ write_c0_entrylo1(ptep->pte_high);
#else
- write_c0_entrylo0(pte_val(*ptep++) >> 6);
- write_c0_entrylo1(pte_val(*ptep) >> 6);
+ write_c0_entrylo0(pte_val(*ptep++) >> 6);
+ write_c0_entrylo1(pte_val(*ptep) >> 6);
#endif
- write_c0_entryhi(address | pid);
mtc0_tlbw_hazard();
if (idx < 0)
tlb_write_random();
else
tlb_write_indexed();
tlbw_use_hazard();
- write_c0_entryhi(pid);
local_irq_restore(flags);
}
@@ -357,7 +368,8 @@
old_pagemask = read_c0_pagemask();
wired = read_c0_wired();
if (--temp_tlb_entry < wired) {
- printk(KERN_WARNING "No TLB space left for add_temporary_entry\n");
+ printk(KERN_WARNING
+ "No TLB space left for add_temporary_entry\n");
ret = -ENOSPC;
goto out;
}
@@ -388,7 +400,7 @@
* is not supported, we assume R4k style. Cpu probing already figured
* out the number of tlb entries.
*/
- if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
+ if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
return;
reg = read_c0_config1();
diff --git a/arch/mips/mm/tlb-sb1.c b/arch/mips/mm/tlb-sb1.c
deleted file mode 100644
index 6256caf..0000000
--- a/arch/mips/mm/tlb-sb1.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- * Copyright (C) 1997, 2001 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <asm/mmu_context.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-
-extern void build_tlb_refill_handler(void);
-
-#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-
-/* Dump the current entry* and pagemask registers */
-static inline void dump_cur_tlb_regs(void)
-{
- unsigned int entryhihi, entryhilo, entrylo0hi, entrylo0lo, entrylo1hi;
- unsigned int entrylo1lo, pagemask;
-
- __asm__ __volatile__ (
- ".set push \n"
- ".set noreorder \n"
- ".set mips64 \n"
- ".set noat \n"
- " tlbr \n"
- " dmfc0 $1, $10 \n"
- " dsrl32 %0, $1, 0 \n"
- " sll %1, $1, 0 \n"
- " dmfc0 $1, $2 \n"
- " dsrl32 %2, $1, 0 \n"
- " sll %3, $1, 0 \n"
- " dmfc0 $1, $3 \n"
- " dsrl32 %4, $1, 0 \n"
- " sll %5, $1, 0 \n"
- " mfc0 %6, $5 \n"
- ".set pop \n"
- : "=r" (entryhihi), "=r" (entryhilo),
- "=r" (entrylo0hi), "=r" (entrylo0lo),
- "=r" (entrylo1hi), "=r" (entrylo1lo),
- "=r" (pagemask));
-
- printk("%08X%08X %08X%08X %08X%08X %08X",
- entryhihi, entryhilo,
- entrylo0hi, entrylo0lo,
- entrylo1hi, entrylo1lo,
- pagemask);
-}
-
-void sb1_dump_tlb(void)
-{
- unsigned long old_ctx;
- unsigned long flags;
- int entry;
- local_irq_save(flags);
- old_ctx = read_c0_entryhi();
- printk("Current TLB registers state:\n"
- " EntryHi EntryLo0 EntryLo1 PageMask Index\n"
- "--------------------------------------------------------------------\n");
- dump_cur_tlb_regs();
- printk(" %08X\n", read_c0_index());
- printk("\n\nFull TLB Dump:\n"
- "Idx EntryHi EntryLo0 EntryLo1 PageMask\n"
- "--------------------------------------------------------------\n");
- for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
- write_c0_index(entry);
- printk("\n%02i ", entry);
- dump_cur_tlb_regs();
- }
- printk("\n");
- write_c0_entryhi(old_ctx);
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags;
- unsigned long old_ctx;
- int entry;
-
- local_irq_save(flags);
- /* Save old context and create impossible VPN2 value */
- old_ctx = read_c0_entryhi() & ASID_MASK;
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
-
- entry = read_c0_wired();
- while (entry < current_cpu_data.tlbsize) {
- write_c0_entryhi(UNIQUE_ENTRYHI(entry));
- write_c0_index(entry);
- tlb_write_indexed();
- entry++;
- }
- write_c0_entryhi(old_ctx);
- local_irq_restore(flags);
-}
-
-
-/*
- * Use a bogus region of memory (starting at 0) to sanitize the TLB's.
- * Use increments of the maximum page size (16MB), and check for duplicate
- * entries before doing a given write. Then, when we're safe from collisions
- * with the firmware, go back and give all the entries invalid addresses with
- * the normal flush routine. Wired entries will be killed as well!
- */
-static void __init sb1_sanitize_tlb(void)
-{
- int entry;
- long addr = 0;
-
- long inc = 1<<24; /* 16MB */
- /* Save old context and create impossible VPN2 value */
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
- do {
- addr += inc;
- write_c0_entryhi(addr);
- tlb_probe();
- } while ((int)(read_c0_index()) >= 0);
- write_c0_index(entry);
- tlb_write_indexed();
- }
- /* Now that we know we're safe from collisions, we can safely flush
- the TLB with the "normal" routine. */
- local_flush_tlb_all();
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
- unsigned long flags;
- int cpu;
-
- local_irq_save(flags);
- cpu = smp_processor_id();
- if (cpu_context(cpu, mm) != 0) {
- int size;
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- size = (size + 1) >> 1;
- if (size <= (current_cpu_data.tlbsize/2)) {
- int oldpid = read_c0_entryhi() & ASID_MASK;
- int newpid = cpu_asid(cpu, mm);
-
- start &= (PAGE_MASK << 1);
- end += ((PAGE_SIZE << 1) - 1);
- end &= (PAGE_MASK << 1);
- while (start < end) {
- int idx;
-
- write_c0_entryhi(start | newpid);
- start += (PAGE_SIZE << 1);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- write_c0_entryhi(UNIQUE_ENTRYHI(idx));
- if (idx < 0)
- continue;
- tlb_write_indexed();
- }
- write_c0_entryhi(oldpid);
- } else {
- drop_mmu_context(mm, cpu);
- }
- }
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- unsigned long flags;
- int size;
-
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- size = (size + 1) >> 1;
-
- local_irq_save(flags);
- if (size <= (current_cpu_data.tlbsize/2)) {
- int pid = read_c0_entryhi();
-
- start &= (PAGE_MASK << 1);
- end += ((PAGE_SIZE << 1) - 1);
- end &= (PAGE_MASK << 1);
-
- while (start < end) {
- int idx;
-
- write_c0_entryhi(start);
- start += (PAGE_SIZE << 1);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- write_c0_entryhi(UNIQUE_ENTRYHI(idx));
- if (idx < 0)
- continue;
- tlb_write_indexed();
- }
- write_c0_entryhi(pid);
- } else {
- local_flush_tlb_all();
- }
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- unsigned long flags;
- int cpu = smp_processor_id();
-
- local_irq_save(flags);
- if (cpu_context(cpu, vma->vm_mm) != 0) {
- int oldpid, newpid, idx;
- newpid = cpu_asid(cpu, vma->vm_mm);
- page &= (PAGE_MASK << 1);
- oldpid = read_c0_entryhi() & ASID_MASK;
- write_c0_entryhi(page | newpid);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- if (idx < 0)
- goto finish;
- /* Make sure all entries differ. */
- write_c0_entryhi(UNIQUE_ENTRYHI(idx));
- tlb_write_indexed();
- finish:
- write_c0_entryhi(oldpid);
- }
- local_irq_restore(flags);
-}
-
-/*
- * Remove one kernel space TLB entry. This entry is assumed to be marked
- * global so we don't do the ASID thing.
- */
-void local_flush_tlb_one(unsigned long page)
-{
- unsigned long flags;
- int oldpid, idx;
-
- page &= (PAGE_MASK << 1);
- oldpid = read_c0_entryhi() & ASID_MASK;
-
- local_irq_save(flags);
- write_c0_entryhi(page);
- tlb_probe();
- idx = read_c0_index();
- if (idx >= 0) {
- /* Make sure all entries differ. */
- write_c0_entryhi(UNIQUE_ENTRYHI(idx));
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- tlb_write_indexed();
- }
-
- write_c0_entryhi(oldpid);
- local_irq_restore(flags);
-}
-
-/* All entries common to a mm share an asid. To effectively flush
- these entries, we just bump the asid. */
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- int cpu;
-
- preempt_disable();
-
- cpu = smp_processor_id();
-
- if (cpu_context(cpu, mm) != 0) {
- drop_mmu_context(mm, cpu);
- }
-
- preempt_enable();
-}
-
-/* Stolen from mips32 routines */
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags;
- pgd_t *pgdp;
- pmd_t *pmdp;
- pte_t *ptep;
- int idx, pid;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- pid = read_c0_entryhi() & ASID_MASK;
- address &= (PAGE_MASK << 1);
- write_c0_entryhi(address | (pid));
- pgdp = pgd_offset(vma->vm_mm, address);
- tlb_probe();
- pmdp = pmd_offset(pgdp, address);
- idx = read_c0_index();
- ptep = pte_offset_map(pmdp, address);
- write_c0_entrylo0(pte_val(*ptep++) >> 6);
- write_c0_entrylo1(pte_val(*ptep) >> 6);
- if (idx < 0) {
- tlb_write_random();
- } else {
- tlb_write_indexed();
- }
- local_irq_restore(flags);
-}
-
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
-{
- unsigned long flags;
- unsigned long wired;
- unsigned long old_pagemask;
- unsigned long old_ctx;
-
- local_irq_save(flags);
- old_ctx = read_c0_entryhi() & 0xff;
- old_pagemask = read_c0_pagemask();
- wired = read_c0_wired();
- write_c0_wired(wired + 1);
- write_c0_index(wired);
-
- write_c0_pagemask(pagemask);
- write_c0_entryhi(entryhi);
- write_c0_entrylo0(entrylo0);
- write_c0_entrylo1(entrylo1);
- tlb_write_indexed();
-
- write_c0_entryhi(old_ctx);
- write_c0_pagemask(old_pagemask);
-
- local_flush_tlb_all();
- local_irq_restore(flags);
-}
-
-/*
- * This is called from loadmmu.c. We have to set up all the
- * memory management function pointers, as well as initialize
- * the caches and tlbs
- */
-void tlb_init(void)
-{
- write_c0_pagemask(PM_DEFAULT_MASK);
- write_c0_wired(0);
-
- /*
- * We don't know what state the firmware left the TLB's in, so this is
- * the ultra-conservative way to flush the TLB's and avoid machine
- * check exceptions due to duplicate TLB entries
- */
- sb1_sanitize_tlb();
-
- build_tlb_refill_handler();
-}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 6569be3..0f94858 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -6,6 +6,7 @@
* Synthesize TLB refill handlers at runtime.
*
* Copyright (C) 2004,2005 by Thiemo Seufer
+ * Copyright (C) 2005 Maciej W. Rozycki
*/
#include <stdarg.h>
@@ -91,7 +92,7 @@
insn_addu, insn_addiu, insn_and, insn_andi, insn_beq,
insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
insn_bne, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0,
- insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32,
+ insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld,
insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0,
insn_ori, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
@@ -134,7 +135,6 @@
{ insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE },
{ insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE },
{ insn_dsrl, M(spec_op,0,0,0,0,dsrl_op), RT | RD | RE },
- { insn_dsrl32, M(spec_op,0,0,0,0,dsrl32_op), RT | RD | RE },
{ insn_dsubu, M(spec_op,0,0,0,0,dsubu_op), RS | RT | RD },
{ insn_eret, M(cop0_op,cop_op,0,0,0,eret_op), 0 },
{ insn_j, M(j_op,0,0,0,0,0), JIMM },
@@ -366,7 +366,6 @@
I_u2u1u3(_dsll32);
I_u2u1u3(_dsra);
I_u2u1u3(_dsrl);
-I_u2u1u3(_dsrl32);
I_u3u1u2(_dsubu);
I_0(_eret);
I_u1(_j);
@@ -412,7 +411,6 @@
label_nopage_tlbm,
label_smp_pgtable_change,
label_r3000_write_probe_fail,
- label_r3000_write_probe_ok
};
struct label {
@@ -445,7 +443,6 @@
L_LA(_nopage_tlbm)
L_LA(_smp_pgtable_change)
L_LA(_r3000_write_probe_fail)
-L_LA(_r3000_write_probe_ok)
/* convenience macros for instructions */
#ifdef CONFIG_64BIT
@@ -490,7 +487,7 @@
static __init int __attribute__((unused)) in_compat_space_p(long addr)
{
/* Is this address in 32bit compat space? */
- return (((addr) & 0xffffffff00000000) == 0xffffffff00000000);
+ return (((addr) & 0xffffffff00000000L) == 0xffffffff00000000L);
}
static __init int __attribute__((unused)) rel_highest(long val)
@@ -734,7 +731,7 @@
if (p > tlb_handler + 32)
panic("TLB refill handler space exceeded");
- printk("Synthesized TLB handler (%u instructions).\n",
+ printk("Synthesized TLB refill handler (%u instructions).\n",
(unsigned int)(p - tlb_handler));
#ifdef DEBUG_TLB
{
@@ -746,7 +743,6 @@
#endif
memcpy((void *)CAC_BASE, tlb_handler, 0x80);
- flush_icache_range(CAC_BASE, CAC_BASE + 0x80);
}
/*
@@ -783,6 +779,8 @@
static __init void __attribute__((unused)) build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_data.cputype) {
+ /* Found by experiment: R4600 v2.0 needs this, too. */
+ case CPU_R4600:
case CPU_R5000:
case CPU_R5000A:
case CPU_NEVADA:
@@ -834,12 +832,20 @@
case CPU_R4700:
case CPU_R5000:
case CPU_R5000A:
+ i_nop(p);
+ tlbw(p);
+ i_nop(p);
+ break;
+
+ case CPU_R4300:
case CPU_5KC:
case CPU_TX49XX:
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
case CPU_AU1550:
+ case CPU_AU1200:
+ case CPU_PR4450:
i_nop(p);
tlbw(p);
break;
@@ -848,6 +854,7 @@
case CPU_R12000:
case CPU_4KC:
case CPU_SB1:
+ case CPU_SB1A:
case CPU_4KSC:
case CPU_20KC:
case CPU_25KF:
@@ -875,6 +882,7 @@
case CPU_4KEC:
case CPU_24K:
+ case CPU_34K:
i_ehb(p);
tlbw(p);
break;
@@ -911,6 +919,7 @@
case CPU_VR4131:
case CPU_VR4133:
+ case CPU_R5432:
i_nop(p);
i_nop(p);
tlbw(p);
@@ -942,34 +951,29 @@
/* No i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_SMP
+# ifdef CONFIG_BUILD_ELF64
/*
- * 64 bit SMP has the lower part of &pgd_current[smp_processor_id()]
+ * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
*/
- if (in_compat_space_p(pgdc)) {
- i_dmfc0(p, ptr, C0_CONTEXT);
- i_dsra(p, ptr, ptr, 23);
- i_ld(p, ptr, 0, ptr);
- } else {
-#ifdef CONFIG_BUILD_ELF64
- i_dmfc0(p, ptr, C0_CONTEXT);
- i_dsrl(p, ptr, ptr, 23);
- i_dsll(p, ptr, ptr, 3);
- i_LA_mostly(p, tmp, pgdc);
- i_daddu(p, ptr, ptr, tmp);
- i_dmfc0(p, tmp, C0_BADVADDR);
- i_ld(p, ptr, rel_lo(pgdc), ptr);
-#else
- i_dmfc0(p, ptr, C0_CONTEXT);
- i_lui(p, tmp, rel_highest(pgdc));
- i_dsll(p, ptr, ptr, 9);
- i_daddiu(p, tmp, tmp, rel_higher(pgdc));
- i_dsrl32(p, ptr, ptr, 0);
- i_and(p, ptr, ptr, tmp);
- i_dmfc0(p, tmp, C0_BADVADDR);
- i_ld(p, ptr, 0, ptr);
-#endif
- }
+ i_dmfc0(p, ptr, C0_CONTEXT);
+ i_dsrl(p, ptr, ptr, 23);
+ i_LA_mostly(p, tmp, pgdc);
+ i_daddu(p, ptr, ptr, tmp);
+ i_dmfc0(p, tmp, C0_BADVADDR);
+ i_ld(p, ptr, rel_lo(pgdc), ptr);
+# else
+ /*
+ * 64 bit SMP running in compat space has the lower part of
+ * &pgd_current[smp_processor_id()] stored in CONTEXT.
+ */
+ if (!in_compat_space_p(pgdc))
+ panic("Invalid page directory address!");
+
+ i_dmfc0(p, ptr, C0_CONTEXT);
+ i_dsra(p, ptr, ptr, 23);
+ i_ld(p, ptr, 0, ptr);
+# endif
#else
i_LA_mostly(p, ptr, pgdc);
i_ld(p, ptr, rel_lo(pgdc), ptr);
@@ -1026,7 +1030,6 @@
i_mfc0(p, ptr, C0_CONTEXT);
i_LA_mostly(p, tmp, pgdc);
i_srl(p, ptr, ptr, 23);
- i_sll(p, ptr, ptr, 2);
i_addu(p, ptr, tmp, ptr);
#else
i_LA_mostly(p, ptr, pgdc);
@@ -1245,13 +1248,19 @@
{
int i;
- for (i = 0; i < 64; i++)
- printk("%08x\n", final_handler[i]);
+ f = final_handler;
+#ifdef CONFIG_64BIT
+ if (final_len > 32)
+ final_len = 64;
+ else
+ f = final_handler + 32;
+#endif /* CONFIG_64BIT */
+ for (i = 0; i < final_len; i++)
+ printk("%08x\n", f[i]);
}
#endif
memcpy((void *)CAC_BASE, final_handler, 0x100);
- flush_icache_range(CAC_BASE, CAC_BASE + 0x100);
}
/*
@@ -1277,37 +1286,41 @@
u32 __tlb_handler_align handle_tlbm[FASTPATH_SIZE];
static void __init
-iPTE_LW(u32 **p, struct label **l, unsigned int pte, int offset,
- unsigned int ptr)
+iPTE_LW(u32 **p, struct label **l, unsigned int pte, unsigned int ptr)
{
#ifdef CONFIG_SMP
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
- i_lld(p, pte, offset, ptr);
+ i_lld(p, pte, 0, ptr);
else
# endif
- i_LL(p, pte, offset, ptr);
+ i_LL(p, pte, 0, ptr);
#else
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
- i_ld(p, pte, offset, ptr);
+ i_ld(p, pte, 0, ptr);
else
# endif
- i_LW(p, pte, offset, ptr);
+ i_LW(p, pte, 0, ptr);
#endif
}
static void __init
-iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, int offset,
- unsigned int ptr)
+iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, unsigned int ptr,
+ unsigned int mode)
{
+#ifdef CONFIG_64BIT_PHYS_ADDR
+ unsigned int hwmode = mode & (_PAGE_VALID | _PAGE_DIRTY);
+#endif
+
+ i_ori(p, pte, pte, mode);
#ifdef CONFIG_SMP
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
- i_scd(p, pte, offset, ptr);
+ i_scd(p, pte, 0, ptr);
else
# endif
- i_SC(p, pte, offset, ptr);
+ i_SC(p, pte, 0, ptr);
if (r10000_llsc_war())
il_beqzl(p, r, pte, label_smp_pgtable_change);
@@ -1318,7 +1331,7 @@
if (!cpu_has_64bits) {
/* no i_nop needed */
i_ll(p, pte, sizeof(pte_t) / 2, ptr);
- i_ori(p, pte, pte, _PAGE_VALID);
+ i_ori(p, pte, pte, hwmode);
i_sc(p, pte, sizeof(pte_t) / 2, ptr);
il_beqz(p, r, pte, label_smp_pgtable_change);
/* no i_nop needed */
@@ -1331,15 +1344,15 @@
#else
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
- i_sd(p, pte, offset, ptr);
+ i_sd(p, pte, 0, ptr);
else
# endif
- i_SW(p, pte, offset, ptr);
+ i_SW(p, pte, 0, ptr);
# ifdef CONFIG_64BIT_PHYS_ADDR
if (!cpu_has_64bits) {
i_lw(p, pte, sizeof(pte_t) / 2, ptr);
- i_ori(p, pte, pte, _PAGE_VALID);
+ i_ori(p, pte, pte, hwmode);
i_sw(p, pte, sizeof(pte_t) / 2, ptr);
i_lw(p, pte, 0, ptr);
}
@@ -1359,7 +1372,7 @@
i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
il_bnez(p, r, pte, lid);
- iPTE_LW(p, l, pte, 0, ptr);
+ iPTE_LW(p, l, pte, ptr);
}
/* Make PTE valid, store result in PTR. */
@@ -1367,8 +1380,9 @@
build_make_valid(u32 **p, struct reloc **r, unsigned int pte,
unsigned int ptr)
{
- i_ori(p, pte, pte, _PAGE_VALID | _PAGE_ACCESSED);
- iPTE_SW(p, r, pte, 0, ptr);
+ unsigned int mode = _PAGE_VALID | _PAGE_ACCESSED;
+
+ iPTE_SW(p, r, pte, ptr, mode);
}
/*
@@ -1382,7 +1396,7 @@
i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
il_bnez(p, r, pte, lid);
- iPTE_LW(p, l, pte, 0, ptr);
+ iPTE_LW(p, l, pte, ptr);
}
/* Make PTE writable, update software status bits as well, then store
@@ -1392,9 +1406,10 @@
build_make_write(u32 **p, struct reloc **r, unsigned int pte,
unsigned int ptr)
{
- i_ori(p, pte, pte,
- _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
- iPTE_SW(p, r, pte, 0, ptr);
+ unsigned int mode = (_PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID
+ | _PAGE_DIRTY);
+
+ iPTE_SW(p, r, pte, ptr, mode);
}
/*
@@ -1407,41 +1422,48 @@
{
i_andi(p, pte, pte, _PAGE_WRITE);
il_beqz(p, r, pte, lid);
- iPTE_LW(p, l, pte, 0, ptr);
+ iPTE_LW(p, l, pte, ptr);
}
/*
* R3000 style TLB load/store/modify handlers.
*/
-/* This places the pte in the page table at PTR into ENTRYLO0. */
+/*
+ * This places the pte into ENTRYLO0 and writes it with tlbwi.
+ * Then it returns.
+ */
static void __init
-build_r3000_pte_reload(u32 **p, unsigned int ptr)
+build_r3000_pte_reload_tlbwi(u32 **p, unsigned int pte, unsigned int tmp)
{
- i_lw(p, ptr, 0, ptr);
- i_nop(p); /* load delay */
- i_mtc0(p, ptr, C0_ENTRYLO0);
- i_nop(p); /* cp0 delay */
+ i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
+ i_mfc0(p, tmp, C0_EPC); /* cp0 delay */
+ i_tlbwi(p);
+ i_jr(p, tmp);
+ i_rfe(p); /* branch delay */
}
/*
- * The index register may have the probe fail bit set,
- * because we would trap on access kseg2, i.e. without refill.
+ * This places the pte into ENTRYLO0 and writes it with tlbwi
+ * or tlbwr as appropriate. This is because the index register
+ * may have the probe fail bit set as a result of a trap on a
+ * kseg2 access, i.e. without refill. Then it returns.
*/
static void __init
-build_r3000_tlb_write(u32 **p, struct label **l, struct reloc **r,
- unsigned int tmp)
+build_r3000_tlb_reload_write(u32 **p, struct label **l, struct reloc **r,
+ unsigned int pte, unsigned int tmp)
{
i_mfc0(p, tmp, C0_INDEX);
- i_nop(p); /* cp0 delay */
- il_bltz(p, r, tmp, label_r3000_write_probe_fail);
- i_nop(p); /* branch delay */
- i_tlbwi(p);
- il_b(p, r, label_r3000_write_probe_ok);
- i_nop(p); /* branch delay */
+ i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
+ il_bltz(p, r, tmp, label_r3000_write_probe_fail); /* cp0 delay */
+ i_mfc0(p, tmp, C0_EPC); /* branch delay */
+ i_tlbwi(p); /* cp0 delay */
+ i_jr(p, tmp);
+ i_rfe(p); /* branch delay */
l_r3000_write_probe_fail(l, *p);
- i_tlbwr(p);
- l_r3000_write_probe_ok(l, *p);
+ i_tlbwr(p); /* cp0 delay */
+ i_jr(p, tmp);
+ i_rfe(p); /* branch delay */
}
static void __init
@@ -1461,17 +1483,7 @@
i_andi(p, pte, pte, 0xffc); /* load delay */
i_addu(p, ptr, ptr, pte);
i_lw(p, pte, 0, ptr);
- i_nop(p); /* load delay */
- i_tlbp(p);
-}
-
-static void __init
-build_r3000_tlbchange_handler_tail(u32 **p, unsigned int tmp)
-{
- i_mfc0(p, tmp, C0_EPC);
- i_nop(p); /* cp0 delay */
- i_jr(p, tmp);
- i_rfe(p); /* branch delay */
+ i_tlbp(p); /* load delay */
}
static void __init build_r3000_tlb_load_handler(void)
@@ -1486,10 +1498,9 @@
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl);
+ i_nop(&p); /* load delay */
build_make_valid(&p, &r, K0, K1);
- build_r3000_pte_reload(&p, K1);
- build_r3000_tlb_write(&p, &l, &r, K0);
- build_r3000_tlbchange_handler_tail(&p, K0);
+ build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
l_nopage_tlbl(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff);
@@ -1506,13 +1517,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbl); i++)
printk("%08x\n", handle_tlbl[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbl,
- (unsigned long)handle_tlbl + FASTPATH_SIZE * sizeof(u32));
}
static void __init build_r3000_tlb_store_handler(void)
@@ -1527,10 +1535,9 @@
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs);
+ i_nop(&p); /* load delay */
build_make_write(&p, &r, K0, K1);
- build_r3000_pte_reload(&p, K1);
- build_r3000_tlb_write(&p, &l, &r, K0);
- build_r3000_tlbchange_handler_tail(&p, K0);
+ build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
l_nopage_tlbs(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
@@ -1547,13 +1554,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbs); i++)
printk("%08x\n", handle_tlbs[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbs,
- (unsigned long)handle_tlbs + FASTPATH_SIZE * sizeof(u32));
}
static void __init build_r3000_tlb_modify_handler(void)
@@ -1568,10 +1572,9 @@
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm);
+ i_nop(&p); /* load delay */
build_make_write(&p, &r, K0, K1);
- build_r3000_pte_reload(&p, K1);
- i_tlbwi(&p);
- build_r3000_tlbchange_handler_tail(&p, K0);
+ build_r3000_pte_reload_tlbwi(&p, K0, K1);
l_nopage_tlbm(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
@@ -1588,13 +1591,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbm); i++)
printk("%08x\n", handle_tlbm[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbm,
- (unsigned long)handle_tlbm + FASTPATH_SIZE * sizeof(u32));
}
/*
@@ -1620,7 +1620,7 @@
#ifdef CONFIG_SMP
l_smp_pgtable_change(l, *p);
# endif
- iPTE_LW(p, l, pte, 0, ptr); /* get even pte */
+ iPTE_LW(p, l, pte, ptr); /* get even pte */
build_tlb_probe_entry(p);
}
@@ -1680,13 +1680,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbl); i++)
printk("%08x\n", handle_tlbl[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbl,
- (unsigned long)handle_tlbl + FASTPATH_SIZE * sizeof(u32));
}
static void __init build_r4000_tlb_store_handler(void)
@@ -1719,13 +1716,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbs); i++)
printk("%08x\n", handle_tlbs[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbs,
- (unsigned long)handle_tlbs + FASTPATH_SIZE * sizeof(u32));
}
static void __init build_r4000_tlb_modify_handler(void)
@@ -1759,13 +1753,10 @@
{
int i;
- for (i = 0; i < FASTPATH_SIZE; i++)
+ for (i = 0; i < (p - handle_tlbm); i++)
printk("%08x\n", handle_tlbm[i]);
}
#endif
-
- flush_icache_range((unsigned long)handle_tlbm,
- (unsigned long)handle_tlbm + FASTPATH_SIZE * sizeof(u32));
}
void __init build_tlb_refill_handler(void)
@@ -1813,3 +1804,13 @@
}
}
}
+
+void __init flush_tlb_handlers(void)
+{
+ flush_icache_range((unsigned long)handle_tlbl,
+ (unsigned long)handle_tlbl + sizeof(handle_tlbl));
+ flush_icache_range((unsigned long)handle_tlbs,
+ (unsigned long)handle_tlbs + sizeof(handle_tlbs));
+ flush_icache_range((unsigned long)handle_tlbm,
+ (unsigned long)handle_tlbm + sizeof(handle_tlbm));
+}
diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig
new file mode 100644
index 0000000..70a61cf
--- /dev/null
+++ b/arch/mips/momentum/Kconfig
@@ -0,0 +1,6 @@
+config JAGUAR_DMALOW
+ bool "Low DMA Mode"
+ depends on MOMENCO_JAGUAR_ATX
+ help
+ Select to Y if jump JP5 is set on your board, N otherwise. Normally
+ the jumper is set, so if you feel unsafe, just say Y.
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
index 14ae2e7..aae7a80 100644
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ b/arch/mips/momentum/jaguar_atx/prom.c
@@ -236,8 +236,9 @@
#endif
}
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
{
+ return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 90288cf..768bf44 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -351,7 +351,7 @@
arch_initcall(ja_pci_init);
-static int __init momenco_jaguar_atx_setup(void)
+void __init plat_setup(void)
{
unsigned int tmpword;
@@ -467,8 +467,4 @@
}
#endif
-
- return 0;
}
-
-early_initcall(momenco_jaguar_atx_setup);
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
index c4fa9c5..9803daa 100644
--- a/arch/mips/momentum/ocelot_3/prom.c
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -239,8 +239,9 @@
#endif
}
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
{
+ return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index ce2efcb..a7803e0 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -307,7 +307,7 @@
arch_initcall(ja_pci_init);
-static int __init momenco_ocelot_3_setup(void)
+void __init plat_setup(void)
{
unsigned int tmpword;
@@ -391,8 +391,4 @@
/* Support for 128 MB memory */
add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM);
-
- return 0;
}
-
-early_initcall(momenco_ocelot_3_setup);
diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
index dea48b3..bd88578 100644
--- a/arch/mips/momentum/ocelot_c/cpci-irq.c
+++ b/arch/mips/momentum/ocelot_c/cpci-irq.c
@@ -129,14 +129,13 @@
#define shutdown_cpci_irq disable_cpci_irq
struct hw_interrupt_type cpci_irq_type = {
- "CPCI/FPGA",
- startup_cpci_irq,
- shutdown_cpci_irq,
- enable_cpci_irq,
- disable_cpci_irq,
- mask_and_ack_cpci_irq,
- end_cpci_irq,
- NULL
+ .typename = "CPCI/FPGA",
+ .startup = startup_cpci_irq,
+ .shutdown = shutdown_cpci_irq,
+ .enable = enable_cpci_irq,
+ .disable = disable_cpci_irq,
+ .ack = mask_and_ack_cpci_irq,
+ .end = end_cpci_irq,
};
void cpci_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 844ddd0..ce70fc9 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -222,7 +222,7 @@
rtc_set_time = m48t37y_set_time;
}
-static void __init momenco_ocelot_c_setup(void)
+void __init plat_setup(void)
{
unsigned int tmpword;
@@ -340,8 +340,6 @@
}
}
-early_initcall(momenco_ocelot_c_setup);
-
#ifndef CONFIG_64BIT
/* This needs to be one of the first initcalls, because no I/O port access
can work before this */
diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c
index ebe1507..755bde5 100644
--- a/arch/mips/momentum/ocelot_c/uart-irq.c
+++ b/arch/mips/momentum/ocelot_c/uart-irq.c
@@ -122,14 +122,13 @@
#define shutdown_uart_irq disable_uart_irq
struct hw_interrupt_type uart_irq_type = {
- "UART/FPGA",
- startup_uart_irq,
- shutdown_uart_irq,
- enable_uart_irq,
- disable_uart_irq,
- mask_and_ack_uart_irq,
- end_uart_irq,
- NULL
+ .typename = "UART/FPGA",
+ .startup = startup_uart_irq,
+ .shutdown = shutdown_uart_irq,
+ .enable = enable_uart_irq,
+ .disable = disable_uart_irq,
+ .ack = mask_and_ack_uart_irq,
+ .end = end_uart_irq,
};
void uart_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 38a78ab..6336751 100644
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -160,7 +160,7 @@
printk("Done\n");
}
-static int __init momenco_ocelot_g_setup(void)
+void __init plat_setup(void)
{
void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
unsigned int tmpword;
@@ -240,12 +240,8 @@
/* FIXME: Fix up the DiskOnChip mapping */
MV_WRITE(0x468, 0xfef73);
-
- return 0;
}
-early_initcall(momenco_ocelot_g_setup);
-
/* This needs to be one of the first initcalls, because no I/O port access
can work before this */
diff --git a/arch/mips/oprofile/Kconfig b/arch/mips/oprofile/Kconfig
index 19d3773..55feaf7 100644
--- a/arch/mips/oprofile/Kconfig
+++ b/arch/mips/oprofile/Kconfig
@@ -11,7 +11,7 @@
config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
- depends on PROFILING
+ depends on PROFILING && EXPERIMENTAL
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index ab65ce3..dd2cc42 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -3,7 +3,8 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004 by Ralf Baechle
+ * Copyright (C) 2004, 2005 Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc.
*/
#include <linux/errno.h>
#include <linux/init.h>
@@ -45,10 +46,10 @@
oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
- /* Dummies. */
oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
oprofilefs_create_ulong(sb, dir, "exl", &ctr[i].exl);
+ /* Dummy. */
oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
}
@@ -68,9 +69,10 @@
on_each_cpu(model->cpu_stop, NULL, 0, 1);
}
-void __init oprofile_arch_init(struct oprofile_operations *ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
struct op_mips_model *lmodel = NULL;
+ int res;
switch (current_cpu_data.cputype) {
case CPU_24K:
@@ -83,21 +85,25 @@
};
if (!lmodel)
- return;
+ return -ENODEV;
- if (lmodel->init())
- return;
+ res = lmodel->init();
+ if (res)
+ return res;
model = lmodel;
- ops->create_files = op_mips_create_files;
- ops->setup = op_mips_setup;
- ops->start = op_mips_start;
- ops->stop = op_mips_stop;
- ops->cpu_type = lmodel->cpu_type;
+ ops->create_files = op_mips_create_files;
+ ops->setup = op_mips_setup;
+ //ops->shutdown = op_mips_shutdown;
+ ops->start = op_mips_start;
+ ops->stop = op_mips_stop;
+ ops->cpu_type = lmodel->cpu_type;
printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
lmodel->cpu_type);
+
+ return 0;
}
void oprofile_arch_exit(void)
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
index 9f5cdff..f012155 100644
--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@@ -10,6 +10,11 @@
#ifndef OP_IMPL_H
#define OP_IMPL_H 1
+struct pt_regs;
+
+extern void null_perf_irq(struct pt_regs *regs);
+extern void (*perf_irq)(struct pt_regs *regs);
+
/* Per-counter configuration as set via oprofilefs. */
struct op_counter_config {
unsigned long enabled;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
new file mode 100644
index 0000000..d36b64d
--- /dev/null
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -0,0 +1,215 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 by Ralf Baechle
+ * Copyright (C) 2005 by MIPS Technologies, Inc.
+ */
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include "op_impl.h"
+
+#define M_PERFCTL_EXL (1UL << 0)
+#define M_PERFCTL_KERNEL (1UL << 1)
+#define M_PERFCTL_SUPERVISOR (1UL << 2)
+#define M_PERFCTL_USER (1UL << 3)
+#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
+#define M_PERFCTL_EVENT(event) ((event) << 5)
+#define M_PERFCTL_WIDE (1UL << 30)
+#define M_PERFCTL_MORE (1UL << 31)
+
+#define M_COUNTER_OVERFLOW (1UL << 31)
+
+struct op_mips_model op_model_mipsxx;
+
+static struct mipsxx_register_config {
+ unsigned int control[4];
+ unsigned int counter[4];
+} reg;
+
+/* Compute all of the registers in preparation for enabling profiling. */
+
+static void mipsxx_reg_setup(struct op_counter_config *ctr)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+ int i;
+
+ /* Compute the performance counter control word. */
+ /* For now count kernel and user mode */
+ for (i = 0; i < counters; i++) {
+ reg.control[i] = 0;
+ reg.counter[i] = 0;
+
+ if (!ctr[i].enabled)
+ continue;
+
+ reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
+ M_PERFCTL_INTERRUPT_ENABLE;
+ if (ctr[i].kernel)
+ reg.control[i] |= M_PERFCTL_KERNEL;
+ if (ctr[i].user)
+ reg.control[i] |= M_PERFCTL_USER;
+ if (ctr[i].exl)
+ reg.control[i] |= M_PERFCTL_EXL;
+ reg.counter[i] = 0x80000000 - ctr[i].count;
+ }
+}
+
+/* Program all of the registers in preparation for enabling profiling. */
+
+static void mipsxx_cpu_setup (void *args)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+
+ switch (counters) {
+ case 4:
+ write_c0_perfctrl3(0);
+ write_c0_perfcntr3(reg.counter[3]);
+ case 3:
+ write_c0_perfctrl2(0);
+ write_c0_perfcntr2(reg.counter[2]);
+ case 2:
+ write_c0_perfctrl1(0);
+ write_c0_perfcntr1(reg.counter[1]);
+ case 1:
+ write_c0_perfctrl0(0);
+ write_c0_perfcntr0(reg.counter[0]);
+ }
+}
+
+/* Start all counters on current CPU */
+static void mipsxx_cpu_start(void *args)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+
+ switch (counters) {
+ case 4:
+ write_c0_perfctrl3(reg.control[3]);
+ case 3:
+ write_c0_perfctrl2(reg.control[2]);
+ case 2:
+ write_c0_perfctrl1(reg.control[1]);
+ case 1:
+ write_c0_perfctrl0(reg.control[0]);
+ }
+}
+
+/* Stop all counters on current CPU */
+static void mipsxx_cpu_stop(void *args)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+
+ switch (counters) {
+ case 4:
+ write_c0_perfctrl3(0);
+ case 3:
+ write_c0_perfctrl2(0);
+ case 2:
+ write_c0_perfctrl1(0);
+ case 1:
+ write_c0_perfctrl0(0);
+ }
+}
+
+static void mipsxx_perfcount_handler(struct pt_regs *regs)
+{
+ unsigned int counters = op_model_mipsxx.num_counters;
+ unsigned int control;
+ unsigned int counter;
+
+ switch (counters) {
+#define HANDLE_COUNTER(n) \
+ case n + 1: \
+ control = read_c0_perfctrl ## n(); \
+ counter = read_c0_perfcntr ## n(); \
+ if ((control & M_PERFCTL_INTERRUPT_ENABLE) && \
+ (counter & M_COUNTER_OVERFLOW)) { \
+ oprofile_add_sample(regs, n); \
+ write_c0_perfcntr ## n(reg.counter[n]); \
+ }
+ HANDLE_COUNTER(3)
+ HANDLE_COUNTER(2)
+ HANDLE_COUNTER(1)
+ HANDLE_COUNTER(0)
+ }
+}
+
+#define M_CONFIG1_PC (1 << 4)
+
+static inline int n_counters(void)
+{
+ if (!(read_c0_config1() & M_CONFIG1_PC))
+ return 0;
+ if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
+ return 1;
+ if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
+ return 2;
+ if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
+ return 3;
+
+ return 4;
+}
+
+static inline void reset_counters(int counters)
+{
+ switch (counters) {
+ case 4:
+ write_c0_perfctrl3(0);
+ write_c0_perfcntr3(0);
+ case 3:
+ write_c0_perfctrl2(0);
+ write_c0_perfcntr2(0);
+ case 2:
+ write_c0_perfctrl1(0);
+ write_c0_perfcntr1(0);
+ case 1:
+ write_c0_perfctrl0(0);
+ write_c0_perfcntr0(0);
+ }
+}
+
+static int __init mipsxx_init(void)
+{
+ int counters;
+
+ counters = n_counters();
+ if (counters == 0)
+ return -ENODEV;
+
+ reset_counters(counters);
+
+ op_model_mipsxx.num_counters = counters;
+ switch (current_cpu_data.cputype) {
+ case CPU_24K:
+ op_model_mipsxx.cpu_type = "mips/24K";
+ break;
+
+ default:
+ printk(KERN_ERR "Profiling unsupported for this CPU\n");
+
+ return -ENODEV;
+ }
+
+ perf_irq = mipsxx_perfcount_handler;
+
+ return 0;
+}
+
+static void mipsxx_exit(void)
+{
+ reset_counters(op_model_mipsxx.num_counters);
+
+ perf_irq = null_perf_irq;
+}
+
+struct op_mips_model op_model_mipsxx = {
+ .reg_setup = mipsxx_reg_setup,
+ .cpu_setup = mipsxx_cpu_setup,
+ .init = mipsxx_init,
+ .exit = mipsxx_exit,
+ .cpu_start = mipsxx_cpu_start,
+ .cpu_stop = mipsxx_cpu_stop,
+};
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index bee4779..9b75e41 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -5,6 +5,7 @@
*
* Copyright (C) 2004 by Ralf Baechle
*/
+#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
@@ -114,7 +115,7 @@
return IRQ_HANDLED;
}
-static int rm9000_init(void)
+static int __init rm9000_init(void)
{
return request_irq(rm9000_perfcount_irq, rm9000_perfcount_handler,
0, "Perfcounter", NULL);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 83d81c9..7b74683 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -34,6 +34,7 @@
obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
+obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
@@ -45,11 +46,13 @@
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
+obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o
obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o
+obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-tx4938.o ops-tx4938.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
index 2406835..87920b2 100644
--- a/arch/mips/pci/fixup-atlas.c
+++ b/arch/mips/pci/fixup-atlas.c
@@ -1,14 +1,37 @@
+/*
+ * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
#include <linux/config.h>
#include <linux/init.h>
#include <linux/pci.h>
+
#include <asm/mips-boards/atlasint.h>
-#define INTD ATLASINT_INTD
-#define INTC ATLASINT_INTC
-#define INTB ATLASINT_INTB
+#define PCIA ATLASINT_PCIA
+#define PCIB ATLASINT_PCIB
+#define PCIC ATLASINT_PCIC
+#define PCID ATLASINT_PCID
#define INTA ATLASINT_INTA
-#define SCSI ATLASINT_SCSI
+#define INTB ATLASINT_INTB
#define ETH ATLASINT_ETH
+#define INTC ATLASINT_INTC
+#define SCSI ATLASINT_SCSI
+#define INTD ATLASINT_INTD
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
@@ -27,13 +50,13 @@
{0, 0, 0, 0, 0 }, /* 12: Unused */
{0, 0, 0, 0, 0 }, /* 13: Unused */
{0, 0, 0, 0, 0 }, /* 14: Unused */
- {0, 0, 0, 0, 0 }, /* 15: Unused */
+ {0, PCIA, PCIB, PCIC, PCID }, /* 15: cPCI (behind 21150) */
{0, SCSI, 0, 0, 0 }, /* 16: SYM53C810A SCSI */
{0, 0, 0, 0, 0 }, /* 17: Core */
- {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot 1 */
- {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Ethernet */
- {0, 0, 0, 0, 0 }, /* 20: PCI Slot 3 */
- {0, 0, 0, 0, 0 } /* 21: PCI Slot 4 */
+ {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot */
+ {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Eth. et al. */
+ {0, 0, 0, 0, 0 }, /* 20: Unused */
+ {0, 0, 0, 0, 0 } /* 21: Unused */
};
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 39fe2b1..c2f8304 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -26,7 +26,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -34,82 +33,7 @@
#include <asm/mach-au1x00/au1000.h>
-/*
- * Shortcut
- */
-#ifdef CONFIG_SOC_AU1500
-#define INTA AU1000_PCI_INTA
-#define INTB AU1000_PCI_INTB
-#define INTC AU1000_PCI_INTC
-#define INTD AU1000_PCI_INTD
-#endif
-
-#ifdef CONFIG_SOC_AU1550
-#define INTA AU1550_PCI_INTA
-#define INTB AU1550_PCI_INTB
-#define INTC AU1550_PCI_INTC
-#define INTD AU1550_PCI_INTD
-#endif
-
-#define INTX 0xFF /* not valid */
-
-#ifdef CONFIG_MIPS_DB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
-};
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MTX1
-static char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-#endif
+extern char irq_tab_alchemy[][5];
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 57e1ca2..909292f 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -21,6 +21,20 @@
extern int cobalt_board_id;
+static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
+{
+ if (dev->devfn == PCI_DEVFN(0, 0) &&
+ (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
+
+ dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff);
+
+ printk(KERN_INFO "Galileo: fixed bridge class\n");
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
+ qube_raq_galileo_early_fixup);
+
static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
{
unsigned short cfgword;
@@ -48,6 +62,9 @@
{
unsigned short galileo_id;
+ if (dev->devfn != PCI_DEVFN(0, 0))
+ return;
+
/* Fix PCI latency-timer and cache-line-size values in Galileo
* host bridge.
*/
@@ -55,6 +72,13 @@
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
/*
+ * The code described by the comment below has been removed
+ * as it causes bus mastering by the Ethernet controllers
+ * to break under any kind of network load. We always set
+ * the retry timeouts to their maximum.
+ *
+ * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
+ *
* On all machines prior to Q2, we had the STOP line disconnected
* from Galileo to VIA on PCI. The new Galileo does not function
* correctly unless we have it connected.
@@ -64,21 +88,43 @@
*/
pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
galileo_id &= 0xff; /* mask off class info */
+
+ printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
+
+#if 0
if (galileo_id >= 0x10) {
/* New Galileo, assumes PCI stop line to VIA is connected. */
GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS);
- } else if (galileo_id == 0x1 || galileo_id == 0x2) {
+ } else if (galileo_id == 0x1 || galileo_id == 0x2)
+#endif
+ {
signed int timeo;
/* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */
timeo = GALILEO_INL(GT_PCI0_TOR_OFS);
/* Old Galileo, assumes PCI STOP line to VIA is disconnected. */
- GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS);
+ GALILEO_OUTL(
+ (0xff << 16) | /* retry count */
+ (0xff << 8) | /* timeout 1 */
+ 0xff, /* timeout 0 */
+ GT_PCI0_TOR_OFS);
+
+ /* enable PCI retry exceeded interrupt */
+ GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID,
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
qube_raq_galileo_fixup);
+static char irq_tab_qube1[] __initdata = {
+ [COBALT_PCICONF_CPU] = 0,
+ [COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ,
+ [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
+ [COBALT_PCICONF_VIA] = 0,
+ [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
+ [COBALT_PCICONF_ETH1] = 0
+};
+
static char irq_tab_cobalt[] __initdata = {
[COBALT_PCICONF_CPU] = 0,
[COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ,
@@ -99,6 +145,9 @@
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
+ return irq_tab_qube1[slot];
+
if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
return irq_tab_raq2[slot];
diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c
new file mode 100644
index 0000000..4256b3b
--- /dev/null
+++ b/arch/mips/pci/fixup-pnx8550.c
@@ -0,0 +1,57 @@
+/*
+ * Philips PNX8550 pci fixups.
+ *
+ * Copyright 2005 Embedded Alley Solutions, Inc
+ * source@embeddealley.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/int.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern char irq_tab_jbs[][5];
+
+void __init pcibios_fixup_resources(struct pci_dev *dev)
+{
+ /* no need to fixup IO resources */
+}
+
+void __init pcibios_fixup(void)
+{
+ /* nothing to do here */
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return irq_tab_jbs[slot][pin];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c
new file mode 100644
index 0000000..f455520
--- /dev/null
+++ b/arch/mips/pci/fixup-tx4938.c
@@ -0,0 +1,92 @@
+/*
+ * Toshiba rbtx4938 pci routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/tx4938/rbtx4938.h>
+
+extern struct pci_controller tx4938_pci_controller[];
+
+int pci_get_irq(struct pci_dev *dev, int pin)
+{
+ int irq = pin;
+ u8 slot = PCI_SLOT(dev->devfn);
+ struct pci_controller *controller = (struct pci_controller *)dev->sysdata;
+
+ if (controller == &tx4938_pci_controller[1]) {
+ /* TX4938 PCIC1 */
+ switch (slot) {
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL)
+ return RBTX4938_IRQ_IRC + TX4938_IR_ETH0;
+ break;
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL)
+ return RBTX4938_IRQ_IRC + TX4938_IR_ETH1;
+ break;
+ }
+ return 0;
+ }
+
+ /* IRQ rotation */
+ irq--; /* 0-3 */
+ if (dev->bus->parent == NULL &&
+ (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) {
+ /* PCI CardSlot (IDSEL=A23) */
+ /* PCIA => PCIA (IDSEL=A23) */
+ irq = (irq + 0 + slot) % 4;
+ } else {
+ /* PCI Backplane */
+ irq = (irq + 33 - slot) % 4;
+ }
+ irq++; /* 1-4 */
+
+ switch (irq) {
+ case 1:
+ irq = RBTX4938_IRQ_IOC_PCIA;
+ break;
+ case 2:
+ irq = RBTX4938_IRQ_IOC_PCIB;
+ break;
+ case 3:
+ irq = RBTX4938_IRQ_IOC_PCIC;
+ break;
+ case 4:
+ irq = RBTX4938_IRQ_IOC_PCID;
+ break;
+ }
+ return irq;
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ unsigned char irq = 0;
+
+ irq = pci_get_irq(dev, pin);
+
+ printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n",
+ dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn),
+ PCI_FUNC(dev->devfn), irq);
+
+ return irq;
+}
+
+/*
+ * Do platform specific device initialization at pci_enable_device() time
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index c1c91ca..be14201 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -50,11 +50,6 @@
int (*board_pci_idsel)(unsigned int devsel, int assert);
-/* CP0 hazard avoidance. */
-#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
- "nop; nop; nop; nop;\t" \
- ".set reorder\n\t")
-
void mod_wired_entry(int entry, unsigned long entrylo0,
unsigned long entrylo1, unsigned long entryhi,
unsigned long pagemask)
@@ -66,16 +61,12 @@
old_ctx = read_c0_entryhi() & 0xff;
old_pagemask = read_c0_pagemask();
write_c0_index(entry);
- BARRIER;
write_c0_pagemask(pagemask);
write_c0_entryhi(entryhi);
write_c0_entrylo0(entrylo0);
write_c0_entrylo1(entrylo1);
- BARRIER;
tlb_write_indexed();
- BARRIER;
write_c0_entryhi(old_ctx);
- BARRIER;
write_c0_pagemask(old_pagemask);
}
@@ -128,9 +119,8 @@
last_entryLo0 = last_entryLo1 = 0xffffffff;
}
- /* Since the Au1xxx doesn't do the idsel timing exactly to spec,
- * many board vendors implement their own off-chip idsel, so call
- * it now. If it doesn't succeed, may as well bail out at this point.
+ /* Allow board vendors to implement their own off-chip idsel.
+ * If it doesn't succeed, may as well bail out at this point.
*/
if (board_pci_idsel) {
if (board_pci_idsel(device, 1) == 0) {
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index 4b4e086..dc35270 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -17,7 +19,6 @@
*
* MIPS boards specific PCI support.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -57,13 +58,6 @@
return -1;
}
-#ifdef CONFIG_MIPS_BOARDS_GEN
- if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
- /* MIPS Core boards have Bonito connected as device 17 */
- return -1;
- }
-#endif
-
/* Clear cause register bits */
BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR |
BONITO_PCICMD_MTABORT_CLR);
diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c
index c5b0fc1..c180793 100644
--- a/arch/mips/pci/ops-gt64111.c
+++ b/arch/mips/pci/ops-gt64111.c
@@ -18,15 +18,15 @@
#include <asm/cobalt/cobalt.h>
/*
- * Accessing device 31 hangs the GT64120. Not sure if this will also hang
- * the GT64111, let's be paranoid for now.
+ * Device 31 on the GT64111 is used to generate PCI special
+ * cycles, so we shouldn't expected to find a device there ...
*/
static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn)
{
- if (bus->number == 0 && devfn == PCI_DEVFN(31, 0))
- return -1;
+ if (bus->number == 0 && PCI_SLOT(devfn) < 31)
+ return 0;
- return 0;
+ return -1;
}
static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn,
diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64120.c
index 7b99dfa..6335844 100644
--- a/arch/mips/pci/ops-gt64120.c
+++ b/arch/mips/pci/ops-gt64120.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -43,10 +45,6 @@
unsigned char busnum = bus->number;
u32 intr;
- if ((busnum == 0) && (PCI_SLOT(devfn) == 0))
- /* Galileo itself is devfn 0, don't move it around */
- return -1;
-
if ((busnum == 0) && (devfn >= PCI_DEVFN(31, 0)))
return -1; /* Because of a bug in the galileo (for slot 31). */
diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c
index 7bc0996..5d9fbb0 100644
--- a/arch/mips/pci/ops-msc.c
+++ b/arch/mips/pci/ops-msc.c
@@ -21,7 +21,6 @@
* MIPS boards specific PCI support.
*
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -49,34 +48,17 @@
struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
{
unsigned char busnum = bus->number;
- unsigned char type;
u32 intr;
-#ifdef CONFIG_MIPS_BOARDS_GEN
- if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
- /* MIPS Core boards have SOCit connected as device 17 */
- return -1;
- }
-#endif
-
/* Clear status register bits. */
MSC_WRITE(MSC01_PCI_INTSTAT,
(MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
- /* Setup address */
- if (busnum == 0)
- type = 0; /* Type 0 */
- else
- type = 1; /* Type 1 */
-
MSC_WRITE(MSC01_PCI_CFGADDR,
((busnum << MSC01_PCI_CFGADDR_BNUM_SHF) |
- (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF)
- | (PCI_FUNC(devfn) <<
- MSC01_PCI_CFGADDR_FNUM_SHF) | ((where /
- 4) <<
- MSC01_PCI_CFGADDR_RNUM_SHF)
- | (type)));
+ (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) |
+ (PCI_FUNC(devfn) << MSC01_PCI_CFGADDR_FNUM_SHF) |
+ ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF)));
/* Perform access */
if (access_type == PCI_ACCESS_WRITE)
@@ -86,15 +68,12 @@
/* Detect Master/Target abort */
MSC_READ(MSC01_PCI_INTSTAT, intr);
- if (intr & (MSC01_PCI_INTCFG_MA_BIT |
- MSC01_PCI_INTCFG_TA_BIT)) {
+ if (intr & (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)) {
/* Error occurred */
/* Clear bits */
- MSC_READ(MSC01_PCI_INTSTAT, intr);
MSC_WRITE(MSC01_PCI_INTSTAT,
- (MSC01_PCI_INTCFG_MA_BIT |
- MSC01_PCI_INTCFG_TA_BIT));
+ (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
return -1;
}
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
index a716992..a8d38dc 100644
--- a/arch/mips/pci/ops-nile4.c
+++ b/arch/mips/pci/ops-nile4.c
@@ -15,7 +15,7 @@
volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
-static spinlock_t nile4_pci_lock;
+static DEFINE_SPINLOCK(nile4_pci_lock);
static int nile4_pcibios_config_access(unsigned char access_type,
struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
new file mode 100644
index 0000000..454b65c
--- /dev/null
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -0,0 +1,284 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ * Based on:
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/glb.h>
+#include <asm/debug.h>
+
+
+static inline void clear_status(void)
+{
+ unsigned long pci_stat;
+
+ pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS);
+ outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR);
+}
+
+static inline unsigned int
+calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where)
+{
+ unsigned int addr;
+
+ addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0);
+ addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc);
+
+ return addr;
+}
+
+static int
+config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val)
+{
+ unsigned int flags;
+ unsigned long loops = 0;
+ unsigned long ioaddr = calc_cfg_addr(bus, devfn, where);
+
+ local_irq_save(flags);
+ /*Clear pending interrupt status */
+ if (inl(PCI_BASE | PCI_GPPM_STATUS)) {
+ clear_status();
+ while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ;
+ }
+
+ outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR);
+
+ if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE))
+ outl(*val, PCI_BASE | PCI_GPPM_WDAT);
+
+ outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK),
+ PCI_BASE | PCI_GPPM_CTRL);
+
+ loops =
+ ((loops_per_jiffy *
+ PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT));
+ while (1) {
+ if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) {
+ if ((pci_cmd == PCI_CMD_IOR) ||
+ (pci_cmd == PCI_CMD_CONFIG_READ))
+ *val = inl(PCI_BASE | PCI_GPPM_RDAT);
+ clear_status();
+ local_irq_restore(flags);
+ return PCIBIOS_SUCCESSFUL;
+ } else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) {
+ break;
+ }
+
+ loops--;
+ if (loops == 0) {
+ printk("%s : Arbiter Locked.\n", __FUNCTION__);
+ }
+ }
+
+ clear_status();
+ if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
+ printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
+ __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
+ pci_cmd);
+ }
+
+ if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ))
+ *val = 0xffffffff;
+ local_irq_restore(flags);
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int
+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
+{
+ unsigned int data = 0;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+ switch (where & 0x03) {
+ case 0:
+ *val = (unsigned char)(data & 0x000000ff);
+ break;
+ case 1:
+ *val = (unsigned char)((data & 0x0000ff00) >> 8);
+ break;
+ case 2:
+ *val = (unsigned char)((data & 0x00ff0000) >> 16);
+ break;
+ case 3:
+ *val = (unsigned char)((data & 0xff000000) >> 24);
+ break;
+ }
+
+ return err;
+}
+
+static int
+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
+{
+ unsigned int data = 0;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x01)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data);
+ switch (where & 0x02) {
+ case 0:
+ *val = (unsigned short)(data & 0x0000ffff);
+ break;
+ case 2:
+ *val = (unsigned short)((data & 0xffff0000) >> 16);
+ break;
+ }
+
+ return err;
+}
+
+static int
+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
+{
+ int err;
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x03)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val);
+
+ return err;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
+{
+ unsigned int data = (unsigned int)val;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ switch (where & 0x03) {
+ case 1:
+ data = (data << 8);
+ break;
+ case 2:
+ data = (data << 16);
+ break;
+ case 3:
+ data = (data << 24);
+ break;
+ default:
+ break;
+ }
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+
+ return err;
+}
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
+{
+ unsigned int data = (unsigned int)val;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x01)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ switch (where & 0x02) {
+ case 2:
+ data = (data << 16);
+ break;
+ default:
+ break;
+ }
+ err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data);
+
+ return err;
+}
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
+{
+ int err;
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x03)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val);
+
+ return err;
+}
+
+static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+ switch (size) {
+ case 1: {
+ u8 _val;
+ int rc = read_config_byte(bus, devfn, where, &_val);
+ *val = _val;
+ return rc;
+ }
+ case 2: {
+ u16 _val;
+ int rc = read_config_word(bus, devfn, where, &_val);
+ *val = _val;
+ return rc;
+ }
+ default:
+ return read_config_dword(bus, devfn, where, val);
+ }
+}
+
+static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return write_config_byte(bus, devfn, where, (u8) val);
+ case 2:
+ return write_config_word(bus, devfn, where, (u16) val);
+ default:
+ return write_config_dword(bus, devfn, where, val);
+ }
+}
+
+struct pci_ops pnx8550_pci_ops = {
+ config_read,
+ config_write
+};
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
new file mode 100644
index 0000000..4c0dcfc
--- /dev/null
+++ b/arch/mips/pci/ops-tx4938.c
@@ -0,0 +1,198 @@
+/*
+ * Define the pci_ops for the Toshiba rbtx4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/* initialize in setup */
+struct resource pci_io_resource = {
+ .name = "pci IO space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO
+};
+
+/* initialize in setup */
+struct resource pci_mem_resource = {
+ .name = "pci memory space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+};
+
+struct resource tx4938_pcic1_pci_io_resource = {
+ .name = "PCI1 IO",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO
+};
+struct resource tx4938_pcic1_pci_mem_resource = {
+ .name = "PCI1 mem",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+};
+
+static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
+{
+ if (bus > 0) {
+ /* Type 1 configuration */
+ tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+ ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
+ } else {
+ if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0))
+ return -1;
+
+ /* Type 0 configuration */
+ tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+ ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
+ }
+ /* clear M_ABORT and Disable M_ABORT Int. */
+ tx4938_pcicptr->pcistatus =
+ (tx4938_pcicptr->pcistatus & 0x0000ffff) |
+ (PCI_STATUS_REC_MASTER_ABORT << 16);
+ tx4938_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
+
+ return 0;
+}
+
+static int check_abort(int flags)
+{
+ int code = PCIBIOS_SUCCESSFUL;
+ /* wait write cycle completion before checking error status */
+ while (tx4938_pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB)
+ ;
+ if (tx4938_pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+ tx4938_pcicptr->pcistatus =
+ (tx4938_pcicptr->
+ pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
+ << 16);
+ tx4938_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
+ code = PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ return code;
+}
+
+static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ int flags, retval, dev, busno, func;
+
+ dev = PCI_SLOT(devfn);
+ func = PCI_FUNC(devfn);
+
+ /* check if the bus is top-level */
+ if (bus->parent != NULL)
+ busno = bus->number;
+ else {
+ busno = 0;
+ }
+
+ if (mkaddr(busno, devfn, where, &flags))
+ return -1;
+
+ switch (size) {
+ case 1:
+ *val = *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 3));
+#else
+ (where & 3));
+#endif
+ break;
+ case 2:
+ *val = *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 2));
+#else
+ (where & 3));
+#endif
+ break;
+ case 4:
+ *val = tx4938_pcicptr->g2pcfgdata;
+ break;
+ }
+
+ retval = check_abort(flags);
+ if (retval == PCIBIOS_DEVICE_NOT_FOUND)
+ *val = 0xffffffff;
+
+ return retval;
+}
+
+static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ int flags, dev, busno, func;
+
+ busno = bus->number;
+ dev = PCI_SLOT(devfn);
+ func = PCI_FUNC(devfn);
+
+ /* check if the bus is top-level */
+ if (bus->parent != NULL) {
+ busno = bus->number;
+ } else {
+ busno = 0;
+ }
+
+ if (mkaddr(busno, devfn, where, &flags))
+ return -1;
+
+ switch (size) {
+ case 1:
+ *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 3)) = val;
+#else
+ (where & 3)) = val;
+#endif
+ break;
+ case 2:
+ *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 0x3) ^ 0x2)) = val;
+#else
+ (where & 3)) = val;
+#endif
+ break;
+ case 4:
+ tx4938_pcicptr->g2pcfgdata = val;
+ break;
+ }
+
+ return check_abort(flags);
+}
+
+struct pci_ops tx4938_pci_ops = {
+ tx4938_pcibios_read_config,
+ tx4938_pcibios_write_config
+};
+
+struct pci_controller tx4938_pci_controller[] = {
+ /* h/w only supports devices 0x00 to 0x14 */
+ {
+ .pci_ops = &tx4938_pci_ops,
+ .io_resource = &pci_io_resource,
+ .mem_resource = &pci_mem_resource,
+ },
+ /* h/w only supports devices 0x00 to 0x14 */
+ {
+ .pci_ops = &tx4938_pci_ops,
+ .io_resource = &tx4938_pcic1_pci_io_resource,
+ .mem_resource = &tx4938_pcic1_pci_mem_resource,
+ }
+};
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
new file mode 100644
index 0000000..f194b4e
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1x80/1x55-specific PCI support
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(cfg_space + (addr & ~3)) = data;
+}
+
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return dev->irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ else
+ return 1;
+ } else
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480_pci_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480_pci_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops bcm1480_pci_ops = {
+ bcm1480_pcibios_read,
+ bcm1480_pcibios_write,
+};
+
+static struct resource bcm1480_mem_resource = {
+ .name = "BCM1480 PCI MEM",
+ .start = 0x30000000UL,
+ .end = 0x3fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480_io_resource = {
+ .name = "BCM1480 PCI I/O",
+ .start = 0x2c000000UL,
+ .end = 0x2dffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480_controller = {
+ .pci_ops = &bcm1480_pci_ops,
+ .mem_resource = &bcm1480_mem_resource,
+ .io_resource = &bcm1480_io_resource,
+};
+
+
+static int __init bcm1480_pcibios_init(void)
+{
+ uint32_t cmdreg;
+ uint64_t reg;
+ extern int pci_probe_only;
+
+ /* CFE will assign PCI resources */
+ pci_probe_only = 1;
+
+ /* Avoid ISA compat ranges. */
+ PCIBIOS_MIN_IO = 0x00008000UL;
+ PCIBIOS_MIN_MEM = 0x01000000UL;
+
+ /* Set I/O resource limits. - unlimited for now to accomodate HT */
+ ioport_resource.end = 0xffffffffUL;
+ iomem_resource.end = 0xffffffffUL;
+
+ cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+ if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
+ bcm1480_bus_status |= PCI_DEVICE_MODE;
+ } else {
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk
+ ("PCI: Skipping PCI probe. Bus is not initialized.\n");
+ iounmap(cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480_bus_status |= PCI_BUS_ENABLED;
+ }
+
+ /* turn on ExpMemEn */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ printk("PCIFeatureCtrl = %x\n", cmdreg);
+ WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
+ cmdreg | 0x10);
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ printk("PCIFeatureCtrl = %x\n", cmdreg);
+
+ /*
+ * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
+ * space. Use "match bytes" policy to make everything look
+ * little-endian. So, you need to also set
+ * CONFIG_SWAP_IO_SPACE, but this is the combination that
+ * works correctly with most of Linux's drivers.
+ * XXX ehs: Should this happen in PCI Device mode?
+ */
+
+ set_io_port_base((unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536));
+ isa_slot_offset = (unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
+
+ register_pci_controller(&bcm1480_controller);
+
+#ifdef CONFIG_VGA_CONSOLE
+ take_over_console(&vga_con,0,MAX_NR_CONSOLES-1,1);
+#endif
+ return 0;
+}
+
+arch_initcall(bcm1480_pcibios_init);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
new file mode 100644
index 0000000..aca4a2e
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+#define HT_BRIDGE_DEVICE 1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480ht_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480ht_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+ return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+ .read = bcm1480ht_pcibios_read,
+ .write = bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+ .name = "BCM1480 HT MEM",
+ .start = 0x40000000UL,
+ .end = 0x5fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+ .name = "BCM1480 HT I/O",
+ .start = 0x00000000UL,
+ .end = 0x01ffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+ .pci_ops = &bcm1480ht_pci_ops,
+ .mem_resource = &bcm1480ht_mem_resource,
+ .io_resource = &bcm1480ht_io_resource,
+ .index = 1,
+ .get_busno = bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+ uint32_t cmdreg;
+
+ ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk("HT: Skipping HT probe. Bus is not initialized.\n");
+ iounmap(ht_cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+ ht_eoi_space = (unsigned long)
+ ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+ 4 * 1024 * 1024);
+
+ register_pci_controller(&bcm1480ht_controller);
+
+ return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 068e0e5..efc96ce 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -485,5 +485,12 @@
pci_disable_swapping(d);
}
+int pcibus_to_node(struct pci_bus *bus)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+
+ return bc->nasid;
+}
+
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c
index 000dc6a..180af89 100644
--- a/arch/mips/pci/pci-ip32.c
+++ b/arch/mips/pci/pci-ip32.c
@@ -136,7 +136,9 @@
BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0,
"MACE PCI error", NULL));
- ioport_resource.end = mace_pci_io_resource.end;
+ iomem_resource = mace_pci_mem_resource;
+ ioport_resource = mace_pci_io_resource;
+
register_pci_controller(&mace_pci_controller);
return 0;
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index ae3cc4b..88fb191 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -7,12 +7,8 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
#include <asm/bootinfo.h>
extern struct pci_ops nile4_pci_ops;
@@ -20,14 +16,14 @@
static struct resource lasat_pci_mem_resource = {
.name = "LASAT PCI MEM",
.start = 0x18000000,
- .end = 0x19FFFFFF,
+ .end = 0x19ffffff,
.flags = IORESOURCE_MEM,
};
static struct resource lasat_pci_io_resource = {
.name = "LASAT PCI IO",
.start = 0x1a000000,
- .end = 0x1bFFFFFF,
+ .end = 0x1bffffff,
.flags = IORESOURCE_IO,
};
@@ -38,23 +34,25 @@
static int __init lasat_pci_setup(void)
{
- printk("PCI: starting\n");
+ printk("PCI: starting\n");
- switch (mips_machtype) {
- case MACH_LASAT_100:
+ switch (mips_machtype) {
+ case MACH_LASAT_100:
lasat_pci_controller.pci_ops = >64120_pci_ops;
break;
- case MACH_LASAT_200:
+ case MACH_LASAT_200:
lasat_pci_controller.pci_ops = &nile4_pci_ops;
break;
- default:
+ default:
panic("pcibios_init: mips_machtype incorrect");
}
register_pci_controller(&lasat_pci_controller);
- return 0;
+
+ return 0;
}
-early_initcall(lasat_pci_setup);
+
+arch_initcall(lasat_pci_setup);
#define LASATINT_ETH1 0
#define LASATINT_ETH0 1
@@ -68,24 +66,22 @@
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
- switch (slot) {
- case 1:
- return LASATINT_PCIA; /* Expansion Module 0 */
- case 2:
- return LASATINT_PCIB; /* Expansion Module 1 */
- case 3:
- return LASATINT_PCIC; /* Expansion Module 2 */
- case 4:
- return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */
- case 5:
- return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */
- case 6:
- return LASATINT_HDC; /* IDE controller */
- default:
- return 0xff; /* Illegal */
- }
+ switch (slot) {
+ case 1:
+ case 2:
+ case 3:
+ return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4);
+ case 4:
+ return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */
+ case 5:
+ return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */
+ case 6:
+ return LASATINT_HDC; /* IDE controller */
+ default:
+ return 0xff; /* Illegal */
+ }
- return -1;
+ return -1;
}
/* Do platform specific device initialization at pci_enable_device() time */
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index a8d499b..21402ff 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -127,15 +127,20 @@
if (!hose->iommu)
PCI_DMA_BUS_IS_PHYS = 1;
+ if (hose->get_busno && pci_probe_only)
+ next_busno = (*hose->get_busno)();
+
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
hose->bus = bus;
hose->need_domain_info = need_domain_info;
- next_busno = bus->subordinate + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
}
continue;
@@ -164,7 +169,7 @@
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
/* Only set up the requested stuff */
if (!(mask & (1<<idx)))
continue;
diff --git a/arch/mips/philips/pnx8550/common/Kconfig b/arch/mips/philips/pnx8550/common/Kconfig
new file mode 100644
index 0000000..072572d
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Kconfig
@@ -0,0 +1 @@
+# Place holder
diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile
new file mode 100644
index 0000000..6e38f3b
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Makefile
@@ -0,0 +1,27 @@
+#
+# Per Hallsmark, per.hallsmark@mvista.com
+#
+# ########################################################################
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# #######################################################################
+#
+# Makefile for the PNX8550 specific kernel interface routines
+# under Linux.
+#
+
+obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_KGDB) += gdb_hook.o
diff --git a/arch/mips/philips/pnx8550/common/gdb_hook.c b/arch/mips/philips/pnx8550/common/gdb_hook.c
new file mode 100644
index 0000000..ad4624f
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/gdb_hook.c
@@ -0,0 +1,109 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * This is the interface to the remote debugger stub.
+ *
+ */
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/serial.h>
+#include <asm/io.h>
+
+#include <uart.h>
+
+static struct serial_state rs_table[IP3106_NR_PORTS] = {
+};
+static struct async_struct kdb_port_info = {0};
+
+void rs_kgdb_hook(int tty_no)
+{
+ struct serial_state *ser = &rs_table[tty_no];
+
+ kdb_port_info.state = ser;
+ kdb_port_info.magic = SERIAL_MAGIC;
+ kdb_port_info.port = tty_no;
+ kdb_port_info.flags = ser->flags;
+
+ /*
+ * Clear all interrupts
+ */
+ /* Clear all the transmitter FIFO counters (pointer and status) */
+ ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
+ /* Clear all the receiver FIFO counters (pointer and status) */
+ ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
+ /* Clear all interrupts */
+ ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
+ IP3106_UART_INT_ALLTX;
+
+ /*
+ * Now, initialize the UART
+ */
+ ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
+ ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
+}
+
+int putDebugChar(char c)
+{
+ /* Wait until FIFO not full */
+ while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+ ;
+ /* Send one char */
+ ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
+
+ return 1;
+}
+
+char getDebugChar(void)
+{
+ char ch;
+
+ /* Wait until there is a char in the FIFO */
+ while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
+ IP3106_UART_FIFO_RXFIFO) >> 8))
+ ;
+ /* Read one char */
+ ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
+ IP3106_UART_FIFO_RBRTHR;
+ /* Advance the RX FIFO read pointer */
+ ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
+ return (ch);
+}
+
+void rs_disable_debug_interrupts(void)
+{
+ ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
+}
+
+void rs_enable_debug_interrupts(void)
+{
+ /* Clear all the transmitter FIFO counters (pointer and status) */
+ ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
+ /* Clear all the receiver FIFO counters (pointer and status) */
+ ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
+ /* Clear all interrupts */
+ ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
+ IP3106_UART_INT_ALLTX;
+ ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
+}
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
new file mode 100644
index 0000000..5461449
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Ported to 2.6.
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ *
+ * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+extern asmlinkage void cp0_irqdispatch(void);
+
+static DEFINE_SPINLOCK(irq_lock);
+
+/* default prio for interrupts */
+/* first one is a no-no so therefore always prio 0 (disabled) */
+static char gic_prio[PNX8550_INT_GIC_TOTINT] = {
+ 0, 1, 1, 1, 1, 15, 1, 1, 1, 1, // 0 - 9
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 10 - 19
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 20 - 29
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 30 - 39
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 40 - 49
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, // 50 - 59
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 60 - 69
+ 1 // 70
+};
+
+void hw0_irqdispatch(int irq, struct pt_regs *regs)
+{
+ /* find out which interrupt */
+ irq = PNX8550_GIC_VECTOR_0 >> 3;
+
+ if (irq == 0) {
+ printk("hw0_irqdispatch: irq 0, spurious interrupt?\n");
+ return;
+ }
+ do_IRQ(PNX8550_INT_GIC_MIN + irq, regs);
+}
+
+
+void timer_irqdispatch(int irq, struct pt_regs *regs)
+{
+ irq = (0x01c0 & read_c0_config7()) >> 6;
+
+ if (irq == 0) {
+ printk("timer_irqdispatch: irq 0, spurious interrupt?\n");
+ return;
+ }
+
+ if (irq & 0x1) {
+ do_IRQ(PNX8550_INT_TIMER1, regs);
+ }
+ if (irq & 0x2) {
+ do_IRQ(PNX8550_INT_TIMER2, regs);
+ }
+ if (irq & 0x4) {
+ do_IRQ(PNX8550_INT_TIMER3, regs);
+ }
+}
+
+static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
+{
+ unsigned long status = read_c0_status();
+
+ status &= ~((clr_mask & 0xFF) << 8);
+ status |= (set_mask & 0xFF) << 8;
+
+ write_c0_status(status);
+}
+
+static inline void mask_gic_int(unsigned int irq_nr)
+{
+ /* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */
+ PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */
+}
+
+static inline void unmask_gic_int(unsigned int irq_nr)
+{
+ /* set prio mask to lower four bits and enable interrupt */
+ PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr];
+}
+
+static inline void mask_irq(unsigned int irq_nr)
+{
+ if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+ modify_cp0_intmask(1 << irq_nr, 0);
+ } else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+ (irq_nr <= PNX8550_INT_GIC_MAX)) {
+ mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+ } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+ (irq_nr <= PNX8550_INT_TIMER_MAX)) {
+ modify_cp0_intmask(1 << 7, 0);
+ } else {
+ printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+ }
+}
+
+static inline void unmask_irq(unsigned int irq_nr)
+{
+ if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+ modify_cp0_intmask(0, 1 << irq_nr);
+ } else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+ (irq_nr <= PNX8550_INT_GIC_MAX)) {
+ unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+ } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+ (irq_nr <= PNX8550_INT_TIMER_MAX)) {
+ modify_cp0_intmask(0, 1 << 7);
+ } else {
+ printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+ }
+}
+
+#define pnx8550_disable pnx8550_ack
+static void pnx8550_ack(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_lock, flags);
+ mask_irq(irq);
+ spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+#define pnx8550_enable pnx8550_unmask
+static void pnx8550_unmask(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_lock, flags);
+ unmask_irq(irq);
+ spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static unsigned int startup_irq(unsigned int irq_nr)
+{
+ pnx8550_unmask(irq_nr);
+ return 0;
+}
+
+static void shutdown_irq(unsigned int irq_nr)
+{
+ pnx8550_ack(irq_nr);
+ return;
+}
+
+int pnx8550_set_gic_priority(int irq, int priority)
+{
+ int gic_irq = irq-PNX8550_INT_GIC_MIN;
+ int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf;
+
+ gic_prio[gic_irq] = priority;
+ PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]);
+
+ return prev_priority;
+}
+
+static inline void mask_and_ack_level_irq(unsigned int irq)
+{
+ pnx8550_disable(irq);
+ return;
+}
+
+static void end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+ pnx8550_enable(irq);
+ }
+}
+
+static struct hw_interrupt_type level_irq_type = {
+ .typename = "PNX Level IRQ",
+ .startup = startup_irq,
+ .shutdown = shutdown_irq,
+ .enable = pnx8550_enable,
+ .disable = pnx8550_disable,
+ .ack = mask_and_ack_level_irq,
+ .end = end_irq,
+};
+
+static struct irqaction gic_action = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .name = "GIC",
+};
+
+static struct irqaction timer_action = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .name = "Timer",
+};
+
+void __init arch_init_irq(void)
+{
+ int i;
+ int configPR;
+
+ /* init of cp0 interrupts */
+ set_except_vector(0, cp0_irqdispatch);
+
+ for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) {
+ irq_desc[i].handler = &level_irq_type;
+ pnx8550_ack(i); /* mask the irq just in case */
+ }
+
+ /* init of GIC/IPC interrupts */
+ /* should be done before cp0 since cp0 init enables the GIC int */
+ for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) {
+ int gic_int_line = i - PNX8550_INT_GIC_MIN;
+ if (gic_int_line == 0 )
+ continue; // don't fiddle with int 0
+ /*
+ * enable change of TARGET, ENABLE and ACTIVE_LOW bits
+ * set TARGET 0 to route through hw0 interrupt
+ * set ACTIVE_LOW 0 active high (correct?)
+ *
+ * We really should setup an interrupt description table
+ * to do this nicely.
+ * Note, PCI INTA is active low on the bus, but inverted
+ * in the GIC, so to us it's active high.
+ */
+#ifdef CONFIG_PNX8550_V2PCI
+ if (gic_int_line == (PNX8550_INT_GPIO0 - PNX8550_INT_GIC_MIN)) {
+ /* PCI INT through gpio 8, which is setup in
+ * pnx8550_setup.c and routed to GPIO
+ * Interrupt Level 0 (GPIO Connection 58).
+ * Set it active low. */
+
+ PNX8550_GIC_REQ(gic_int_line) = 0x1E020000;
+ } else
+#endif
+ {
+ PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000;
+ }
+
+ /* mask/priority is still 0 so we will not get any
+ * interrupts until it is unmasked */
+
+ irq_desc[i].handler = &level_irq_type;
+ }
+
+ /* Priority level 0 */
+ PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0;
+
+ /* Set int vector table address */
+ PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0;
+
+ irq_desc[MIPS_CPU_GIC_IRQ].handler = &level_irq_type;
+ setup_irq(MIPS_CPU_GIC_IRQ, &gic_action);
+
+ /* init of Timer interrupts */
+ for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) {
+ irq_desc[i].handler = &level_irq_type;
+ }
+
+ /* Stop Timer 1-3 */
+ configPR = read_c0_config7();
+ configPR |= 0x00000038;
+ write_c0_config7(configPR);
+
+ irq_desc[MIPS_CPU_TIMER_IRQ].handler = &level_irq_type;
+ setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action);
+}
+
+EXPORT_SYMBOL(pnx8550_set_gic_priority);
diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S
new file mode 100644
index 0000000..338bffd
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/mipsIRQ.S
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2002 Philips, Inc. All rights.
+ * Copyright (c) 2002 Red Hat, Inc. All rights.
+ *
+ * This software may be freely redistributed under the terms of the
+ * GNU General Public License.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon arch/mips/galileo-boards/ev64240/int-handler.S
+ *
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * cp0_irqdispatch
+ *
+ * Code to handle in-core interrupt exception.
+ */
+
+ .align 5
+ .set reorder
+ .set noat
+ NESTED(cp0_irqdispatch, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ mfc0 t0,CP0_CAUSE
+ mfc0 t2,CP0_STATUS
+
+ and t0,t2
+
+ andi t1,t0,STATUSF_IP2 /* int0 hardware line */
+ bnez t1,ll_hw0_irq
+ nop
+
+ andi t1,t0,STATUSF_IP7 /* int5 hardware line */
+ bnez t1,ll_timer_irq
+ nop
+
+ /* wrong alarm or masked ... */
+
+ j spurious_interrupt
+ nop
+ END(cp0_irqdispatch)
+
+ .align 5
+ .set reorder
+ll_hw0_irq:
+ li a0,2
+ move a1,sp
+ jal hw0_irqdispatch
+ nop
+ j ret_from_irq
+ nop
+
+ .align 5
+ .set reorder
+ll_timer_irq:
+ mfc0 t3,CP0_CONFIG,7
+ andi t4,t3,0x01c0
+ beqz t4,ll_timer_out
+ nop
+ li a0,7
+ move a1,sp
+ jal timer_irqdispatch
+ nop
+
+ll_timer_out: j ret_from_irq
+ nop
diff --git a/arch/mips/philips/pnx8550/common/pci.c b/arch/mips/philips/pnx8550/common/pci.c
new file mode 100644
index 0000000..baa6905
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/pci.c
@@ -0,0 +1,133 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <pci.h>
+#include <glb.h>
+#include <nand.h>
+
+static struct resource pci_io_resource = {
+ "pci IO space",
+ (u32)(PNX8550_PCIIO + 0x1000), /* reserve regacy I/O space */
+ (u32)(PNX8550_PCIIO + PNX8550_PCIIO_SIZE),
+ IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+ "pci memory space",
+ (u32)(PNX8550_PCIMEM),
+ (u32)(PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1),
+ IORESOURCE_MEM
+};
+
+extern struct pci_ops pnx8550_pci_ops;
+
+static struct pci_controller pnx8550_controller = {
+ .pci_ops = &pnx8550_pci_ops,
+ .io_resource = &pci_io_resource,
+ .mem_resource = &pci_mem_resource,
+};
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+static inline unsigned long get_system_mem_size(void)
+{
+ /* Read IP2031_RANK0_ADDR_LO */
+ unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+ /* Read IP2031_RANK1_ADDR_HI */
+ unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+ return dram_r1_hi - dram_r0_lo + 1;
+}
+
+static int __init pnx8550_pci_setup(void)
+{
+ int pci_mem_code;
+ int mem_size = get_system_mem_size() >> 20;
+
+ /* Clear the Global 2 Register, PCI Inta Output Enable Registers
+ Bit 1:Enable DAC Powerdown
+ -> 0:DACs are enabled and are working normally
+ 1:DACs are powerdown
+ Bit 0:Enable of PCI inta output
+ -> 0 = Disable PCI inta output
+ 1 = Enable PCI inta output
+ */
+ PNX8550_GLB2_ENAB_INTA_O = 0;
+
+ /* Calc the PCI mem size code */
+ if (mem_size >= 128)
+ pci_mem_code = SIZE_128M;
+ else if (mem_size >= 64)
+ pci_mem_code = SIZE_64M;
+ else if (mem_size >= 32)
+ pci_mem_code = SIZE_32M;
+ else
+ pci_mem_code = SIZE_16M;
+
+ /* Set PCI_XIO registers */
+ outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
+ outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
+ outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
+ outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
+
+ /* Send memory transaction via PCI_BASE2 */
+ outl(0x00000001, PCI_BASE | PCI_IO);
+
+ /* Unlock the setup register */
+ outl(0xca, PCI_BASE | PCI_UNLOCKREG);
+
+ /*
+ * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
+ * to work, and in order for bus_to_baddr to work without any
+ * hacks.
+ */
+ outl(0x00000000, PCI_BASE | PCI_BASE10);
+
+ /*
+ *These two bars are set by default or the boot code.
+ * However, it's safer to set them here so we're not boot
+ * code dependent.
+ */
+ outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
+ outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
+
+ outl(PCI_EN_TA |
+ PCI_EN_PCI2MMI |
+ PCI_EN_XIO |
+ PCI_SETUP_BASE18_SIZE(SIZE_32M) |
+ PCI_SETUP_BASE18_EN |
+ PCI_SETUP_BASE14_EN |
+ PCI_SETUP_BASE10_PREF |
+ PCI_SETUP_BASE10_SIZE(pci_mem_code) |
+ PCI_SETUP_CFGMANAGE_EN |
+ PCI_SETUP_PCIARB_EN,
+ PCI_BASE |
+ PCI_SETUP); /* PCI_SETUP */
+ outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
+
+ register_pci_controller(&pnx8550_controller);
+
+ return 0;
+}
+
+arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c
new file mode 100644
index 0000000..8aa9bd6
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/platform.c
@@ -0,0 +1,135 @@
+/*
+ * Platform device support for Philips PNX8550 SoCs
+ *
+ * Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ * Based on arch/mips/au1000/common/platform.c
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial.h>
+#include <linux/serial_ip3106.h>
+
+#include <int.h>
+#include <usb.h>
+#include <uart.h>
+
+extern struct uart_ops ip3106_pops;
+
+static struct resource pnx8550_usb_ohci_resources[] = {
+ [0] = {
+ .start = PNX8550_USB_OHCI_OP_BASE,
+ .end = PNX8550_USB_OHCI_OP_BASE +
+ PNX8550_USB_OHCI_OP_LEN,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PNX8550_INT_USB,
+ .end = PNX8550_INT_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource pnx8550_uart_resources[] = {
+ [0] = {
+ .start = PNX8550_UART_PORT0,
+ .end = PNX8550_UART_PORT0 + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PNX8550_UART_INT(0),
+ .end = PNX8550_UART_INT(0),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = PNX8550_UART_PORT1,
+ .end = PNX8550_UART_PORT1 + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .start = PNX8550_UART_INT(1),
+ .end = PNX8550_UART_INT(1),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct ip3106_port ip3106_ports[] = {
+ [0] = {
+ .port = {
+ .type = PORT_IP3106,
+ .iotype = SERIAL_IO_MEM,
+ .membase = (void __iomem *)PNX8550_UART_PORT0,
+ .mapbase = PNX8550_UART_PORT0,
+ .irq = PNX8550_UART_INT(0),
+ .uartclk = 3692300,
+ .fifosize = 16,
+ .ops = &ip3106_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ },
+ [1] = {
+ .port = {
+ .type = PORT_IP3106,
+ .iotype = SERIAL_IO_MEM,
+ .membase = (void __iomem *)PNX8550_UART_PORT1,
+ .mapbase = PNX8550_UART_PORT1,
+ .irq = PNX8550_UART_INT(1),
+ .uartclk = 3692300,
+ .fifosize = 16,
+ .ops = &ip3106_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ },
+};
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static u64 uart_dmamask = ~(u32)0;
+
+static struct platform_device pnx8550_usb_ohci_device = {
+ .name = "pnx8550-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources),
+ .resource = pnx8550_usb_ohci_resources,
+};
+
+static struct platform_device pnx8550_uart_device = {
+ .name = "ip3106-uart",
+ .id = -1,
+ .dev = {
+ .dma_mask = &uart_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = ip3106_ports,
+ },
+ .num_resources = ARRAY_SIZE(pnx8550_uart_resources),
+ .resource = pnx8550_uart_resources,
+};
+
+static struct platform_device *pnx8550_platform_devices[] __initdata = {
+ &pnx8550_usb_ohci_device,
+ &pnx8550_uart_device,
+};
+
+int pnx8550_platform_init(void)
+{
+ return platform_add_devices(pnx8550_platform_devices,
+ ARRAY_SIZE(pnx8550_platform_devices));
+}
+
+arch_initcall(pnx8550_platform_init);
diff --git a/arch/mips/philips/pnx8550/common/proc.c b/arch/mips/philips/pnx8550/common/proc.c
new file mode 100644
index 0000000..72a0167
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/proc.c
@@ -0,0 +1,113 @@
+/*
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+
+static int pnx8550_timers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+ int len = 0;
+ int configPR = read_c0_config7();
+
+ if (offset==0) {
+ len += sprintf(&page[len],"Timer: count, compare, tc, status\n");
+ len += sprintf(&page[len]," 1: %11i, %8i, %1i, %s\n",
+ read_c0_count(), read_c0_compare(),
+ (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on");
+ len += sprintf(&page[len]," 2: %11i, %8i, %1i, %s\n",
+ read_c0_count2(), read_c0_compare2(),
+ (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on");
+ len += sprintf(&page[len]," 3: %11i, %8i, %1i, %s\n",
+ read_c0_count3(), read_c0_compare3(),
+ (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on");
+ }
+
+ return len;
+}
+
+static int pnx8550_registers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+ int len = 0;
+
+ if (offset==0) {
+ len += sprintf(&page[len],"config1: %#10.8x\n",read_c0_config1());
+ len += sprintf(&page[len],"config2: %#10.8x\n",read_c0_config2());
+ len += sprintf(&page[len],"config3: %#10.8x\n",read_c0_config3());
+ len += sprintf(&page[len],"configPR: %#10.8x\n",read_c0_config7());
+ len += sprintf(&page[len],"status: %#10.8x\n",read_c0_status());
+ len += sprintf(&page[len],"cause: %#10.8x\n",read_c0_cause());
+ len += sprintf(&page[len],"count: %#10.8x\n",read_c0_count());
+ len += sprintf(&page[len],"count_2: %#10.8x\n",read_c0_count2());
+ len += sprintf(&page[len],"count_3: %#10.8x\n",read_c0_count3());
+ len += sprintf(&page[len],"compare: %#10.8x\n",read_c0_compare());
+ len += sprintf(&page[len],"compare_2: %#10.8x\n",read_c0_compare2());
+ len += sprintf(&page[len],"compare_3: %#10.8x\n",read_c0_compare3());
+ }
+
+ return len;
+}
+
+static struct proc_dir_entry* pnx8550_dir = NULL;
+static struct proc_dir_entry* pnx8550_timers = NULL;
+static struct proc_dir_entry* pnx8550_registers = NULL;
+
+static int pnx8550_proc_init( void )
+{
+
+ // Create /proc/pnx8550
+ pnx8550_dir = create_proc_entry("pnx8550", S_IFDIR|S_IRUGO, NULL);
+ if (pnx8550_dir){
+ pnx8550_dir->nlink = 1;
+ }
+ else {
+ printk(KERN_ERR "Can't create pnx8550 proc dir\n");
+ return -1;
+ }
+
+ // Create /proc/pnx8550/timers
+ pnx8550_timers = create_proc_entry("timers", S_IFREG|S_IRUGO, pnx8550_dir );
+ if (pnx8550_timers){
+ pnx8550_timers->nlink = 1;
+ pnx8550_timers->read_proc = pnx8550_timers_read;
+ }
+ else {
+ printk(KERN_ERR "Can't create pnx8550 timers proc file\n");
+ }
+
+ // Create /proc/pnx8550/registers
+ pnx8550_registers = create_proc_entry("registers", S_IFREG|S_IRUGO, pnx8550_dir );
+ if (pnx8550_registers){
+ pnx8550_registers->nlink = 1;
+ pnx8550_registers->read_proc = pnx8550_registers_read;
+ }
+ else {
+ printk(KERN_ERR "Can't create pnx8550 registers proc file\n");
+ }
+
+ return 0;
+}
+
+__initcall(pnx8550_proc_init);
diff --git a/arch/mips/philips/pnx8550/common/prom.c b/arch/mips/philips/pnx8550/common/prom.c
new file mode 100644
index 0000000..70aac97
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/prom.c
@@ -0,0 +1,138 @@
+/*
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ *
+ * Based on jmr3927/common/prom.c
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/bootinfo.h>
+#include <uart.h>
+
+/* #define DEBUG_CMDLINE */
+
+extern int prom_argc;
+extern char **prom_argv, **prom_envp;
+
+typedef struct
+{
+ char *name;
+/* char *val; */
+}t_env_var;
+
+
+char * prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+void prom_init_cmdline(void)
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while(actr < prom_argc) {
+ strcpy(cp, prom_argv[actr]);
+ cp += strlen(prom_argv[actr]);
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+}
+
+char *prom_getenv(char *envname)
+{
+ /*
+ * Return a pointer to the given environment variable.
+ * Environment variables are stored in the form of "memsize=64".
+ */
+
+ t_env_var *env = (t_env_var *)prom_envp;
+ int i;
+
+ i = strlen(envname);
+
+ while(env->name) {
+ if(strncmp(envname, env->name, i) == 0) {
+ return(env->name + strlen(envname) + 1);
+ }
+ env++;
+ }
+ return(NULL);
+}
+
+inline unsigned char str2hexnum(unsigned char c)
+{
+ if(c >= '0' && c <= '9')
+ return c - '0';
+ if(c >= 'a' && c <= 'f')
+ return c - 'a' + 10;
+ if(c >= 'A' && c <= 'F')
+ return c - 'A' + 10;
+ return 0; /* foo */
+}
+
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+ int i;
+
+ for(i = 0; i < 6; i++) {
+ unsigned char num;
+
+ if((*str == '.') || (*str == ':'))
+ str++;
+ num = str2hexnum(*str++) << 4;
+ num |= (str2hexnum(*str++));
+ ea[i] = num;
+ }
+}
+
+int get_ethernet_addr(char *ethernet_addr)
+{
+ char *ethaddr_str;
+
+ ethaddr_str = prom_getenv("ethaddr");
+ if (!ethaddr_str) {
+ printk("ethaddr not set in boot prom\n");
+ return -1;
+ }
+ str2eaddr(ethernet_addr, ethaddr_str);
+ return 0;
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
+
+extern int pnx8550_console_port;
+
+/* used by prom_printf */
+void prom_putchar(char c)
+{
+ if (pnx8550_console_port != -1) {
+ /* Wait until FIFO not full */
+ while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+ ;
+ /* Send one char */
+ ip3106_fifo(UART_BASE, pnx8550_console_port) = c;
+ }
+}
+
+EXPORT_SYMBOL(prom_getcmdline);
+EXPORT_SYMBOL(get_ethernet_addr);
+EXPORT_SYMBOL(str2eaddr);
diff --git a/arch/mips/philips/pnx8550/common/reset.c b/arch/mips/philips/pnx8550/common/reset.c
new file mode 100644
index 0000000..7b2cbc5
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/reset.c
@@ -0,0 +1,49 @@
+/*.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Reset the PNX8550 board.
+ *
+ */
+#include <linux/slab.h>
+#include <asm/reboot.h>
+#include <glb.h>
+
+void pnx8550_machine_restart(char *command)
+{
+ char head[] = "************* Machine restart *************";
+ char foot[] = "*******************************************";
+
+ printk("\n\n");
+ printk("%s\n", head);
+ if (command != NULL)
+ printk("* %s\n", command);
+ printk("%s\n", foot);
+
+ PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
+}
+
+void pnx8550_machine_halt(void)
+{
+ printk("*** Machine halt. (Not implemented) ***\n");
+}
+
+void pnx8550_machine_power_off(void)
+{
+ printk("*** Machine power off. (Not implemented) ***\n");
+}
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c
new file mode 100644
index 0000000..ee6bf72
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/setup.c
@@ -0,0 +1,149 @@
+/*
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ * Based on Per Hallsmark, per.hallsmark@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/time.h>
+
+#include <glb.h>
+#include <int.h>
+#include <pci.h>
+#include <uart.h>
+#include <nand.h>
+
+extern void prom_printf(char *fmt, ...);
+
+extern void __init board_setup(void);
+extern void pnx8550_machine_restart(char *);
+extern void pnx8550_machine_halt(void);
+extern void pnx8550_machine_power_off(void);
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+extern void (*board_time_init)(void);
+extern void pnx8550_time_init(void);
+extern void (*board_timer_setup)(struct irqaction *irq);
+extern void pnx8550_timer_setup(struct irqaction *irq);
+extern void rs_kgdb_hook(int tty_no);
+extern void prom_printf(char *fmt, ...);
+extern char *prom_getcmdline(void);
+
+struct resource standard_io_resources[] = {
+ {"dma1", 0x00, 0x1f, IORESOURCE_BUSY},
+ {"timer", 0x40, 0x5f, IORESOURCE_BUSY},
+ {"dma page reg", 0x80, 0x8f, IORESOURCE_BUSY},
+ {"dma2", 0xc0, 0xdf, IORESOURCE_BUSY},
+};
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+extern struct resource pci_io_resource;
+extern struct resource pci_mem_resource;
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+unsigned long get_system_mem_size(void)
+{
+ /* Read IP2031_RANK0_ADDR_LO */
+ unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+ /* Read IP2031_RANK1_ADDR_HI */
+ unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+ return dram_r1_hi - dram_r0_lo + 1;
+}
+
+int pnx8550_console_port = -1;
+
+void __init plat_setup(void)
+{
+ int i;
+ char* argptr;
+
+ board_setup(); /* board specific setup */
+
+ _machine_restart = pnx8550_machine_restart;
+ _machine_halt = pnx8550_machine_halt;
+ _machine_power_off = pnx8550_machine_power_off;
+
+ board_time_init = pnx8550_time_init;
+ board_timer_setup = pnx8550_timer_setup;
+
+ /* Clear the Global 2 Register, PCI Inta Output Enable Registers
+ Bit 1:Enable DAC Powerdown
+ -> 0:DACs are enabled and are working normally
+ 1:DACs are powerdown
+ Bit 0:Enable of PCI inta output
+ -> 0 = Disable PCI inta output
+ 1 = Enable PCI inta output
+ */
+ PNX8550_GLB2_ENAB_INTA_O = 0;
+
+ /* IO/MEM resources. */
+ set_io_port_base(KSEG1);
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
+ iomem_resource.start = 0;
+ iomem_resource.end = ~0;
+
+ /* Request I/O space for devices on this board */
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource, standard_io_resources + i);
+
+ /* Place the Mode Control bit for GPIO pin 16 in primary function */
+ /* Pin 16 is used by UART1, UA1_TX */
+ outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
+ (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
+ PNX8550_GPIO_MC1);
+
+ argptr = prom_getcmdline();
+ if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
+ argptr += strlen("console=ttyS");
+ pnx8550_console_port = *argptr == '0' ? 0 : 1;
+
+ /* We must initialize the UART (console) before prom_printf */
+ /* Set LCR to 8-bit and BAUD to 38400 (no 5) */
+ ip3106_lcr(UART_BASE, pnx8550_console_port) =
+ IP3106_UART_LCR_8BIT;
+ ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
+ }
+
+#ifdef CONFIG_KGDB
+ argptr = prom_getcmdline();
+ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
+ int line;
+ argptr += strlen("kgdb=ttyS");
+ line = *argptr == '0' ? 0 : 1;
+ rs_kgdb_hook(line);
+ prom_printf("KGDB: Using ttyS%i for session, "
+ "please connect your debugger\n", line ? 1 : 0);
+ }
+#endif
+ return;
+}
diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c
new file mode 100644
index 0000000..70664ea
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/time.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2001, 2002, 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Common time service routines for MIPS machines. See
+ * Documents/MIPS/README.txt.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/debug.h>
+
+#include <int.h>
+#include <cm.h>
+
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * pnx8550_time_init() - it does the following things:
+ *
+ * 1) board_time_init() -
+ * a) (optional) set up RTC routines,
+ * b) (optional) calibrate and set the mips_hpt_frequency
+ * (only needed if you intended to use fixed_rate_gettimeoffset
+ * or use cpu counter as timer interrupt source)
+ */
+
+void pnx8550_time_init(void)
+{
+ unsigned int n;
+ unsigned int m;
+ unsigned int p;
+ unsigned int pow2p;
+
+ /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
+ /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */
+
+ n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16;
+ m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8;
+ p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2;
+ pow2p = (1 << p);
+
+ db_assert(m != 0 && pow2p != 0);
+
+ /*
+ * Compute the frequency as in the PNX8550 User Manual 1.0, p.186
+ * (a.k.a. 8-10). Divide by HZ for a timer offset that results in
+ * HZ timer interrupts per second.
+ */
+ mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
+}
+
+/*
+ * pnx8550_timer_setup() - it does the following things:
+ *
+ * 5) board_timer_setup() -
+ * a) (optional) over-write any choices made above by time_init().
+ * b) machine specific code should setup the timer irqaction.
+ * c) enable the timer interrupt
+ */
+
+void __init pnx8550_timer_setup(struct irqaction *irq)
+{
+ int configPR;
+
+ setup_irq(PNX8550_INT_TIMER1, irq);
+
+ /* Start timer1 */
+ configPR = read_c0_config7();
+ configPR &= ~0x00000008;
+ write_c0_config7(configPR);
+
+ /* Timer 2 stop */
+ configPR = read_c0_config7();
+ configPR |= 0x00000010;
+ write_c0_config7(configPR);
+
+ write_c0_count2(0);
+ write_c0_compare2(0xffffffff);
+
+ /* Timer 3 stop */
+ configPR = read_c0_config7();
+ configPR |= 0x00000020;
+ write_c0_config7(configPR);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/Makefile b/arch/mips/philips/pnx8550/jbs/Makefile
new file mode 100644
index 0000000..e8228db
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/Makefile
@@ -0,0 +1,4 @@
+
+# Makefile for the Philips JBS Board.
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/philips/pnx8550/jbs/board_setup.c b/arch/mips/philips/pnx8550/jbs/board_setup.c
new file mode 100644
index 0000000..f92826e
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/board_setup.c
@@ -0,0 +1,65 @@
+/*
+ * JBS Specific board startup routines.
+ *
+ * Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+
+#include <glb.h>
+
+/* CP0 hazard avoidance. */
+#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
+void __init board_setup(void)
+{
+ unsigned long config0, configpr;
+
+ config0 = read_c0_config();
+
+ /* clear all three cache coherency fields */
+ config0 &= ~(0x7 | (7<<25) | (7<<28));
+ config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
+ (CONF_CM_DEFAULT<<28));
+ write_c0_config(config0);
+ BARRIER;
+
+ configpr = read_c0_config7();
+ configpr |= (1<<19); /* enable tlb */
+ write_c0_config7(configpr);
+ BARRIER;
+}
diff --git a/arch/mips/philips/pnx8550/jbs/init.c b/arch/mips/philips/pnx8550/jbs/init.c
new file mode 100644
index 0000000..85f4491
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/init.c
@@ -0,0 +1,57 @@
+/*
+ *
+ * Copyright 2005 Embedded Alley Solutions, Inc
+ * source@embeddedalley.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+ return "Philips PNX8550/JBS";
+}
+
+void __init prom_init(void)
+{
+
+ unsigned long memsize;
+
+ mips_machgroup = MACH_GROUP_PHILIPS;
+ mips_machtype = MACH_PHILIPS_JBS;
+
+ //memsize = 0x02800000; /* Trimedia uses memory above */
+ memsize = 0x08000000; /* Trimedia uses memory above */
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/irqmap.c b/arch/mips/philips/pnx8550/jbs/irqmap.c
new file mode 100644
index 0000000..f78e042
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/irqmap.c
@@ -0,0 +1,36 @@
+/*
+ * Philips JBS board irqmap.
+ *
+ * Copyright 2005 Embedded Alley Solutions, Inc
+ * source@embeddealley.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <int.h>
+
+char irq_tab_jbs[][5] __initdata = {
+ [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+};
+
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
new file mode 100644
index 0000000..24d514c
--- /dev/null
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -0,0 +1,3 @@
+config HYPERTRANSPORT
+ bool "Hypertransport Support for PMC-Sierra Yosemite"
+ depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
index c19f01a..a312883 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
@@ -34,7 +34,6 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <asm/pci.h>
#include <asm/io.h>
#include <linux/init.h>
diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c
index d22c9ff..5aec405 100644
--- a/arch/mips/pmc-sierra/yosemite/ht-irq.c
+++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c
@@ -26,7 +26,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <asm/pci.h>
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index dad228d..54b65a8 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -28,7 +28,6 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <asm/pci.h>
#include <asm/io.h>
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 1fb3e69..555bfacf 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -132,8 +132,9 @@
prom_grab_secondary();
}
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
{
+ return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 7225bbf..bdc2ab5 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -212,7 +212,7 @@
py_rtc_setup();
}
-static int __init pmc_yosemite_setup(void)
+void __init plat_setup(void)
{
board_time_init = yosemite_time_init;
late_time_init = py_late_time_init;
@@ -228,8 +228,4 @@
OCD_WRITE(RM9000x2_OCD_HTBAR0, HYPERTRANSPORT_BAR0_ADDR);
OCD_WRITE(RM9000x2_OCD_HTMASK0, HYPERTRANSPORT_SIZE0);
#endif
-
- return 0;
}
-
-early_initcall(pmc_yosemite_setup);
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 1d3b073..0527170 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -9,7 +9,7 @@
#define LAUNCHSTACK_SIZE 256
-static spinlock_t launch_lock __initdata;
+static __initdata DEFINE_SPINLOCK(launch_lock);
static unsigned long secondary_sp __initdata;
static unsigned long secondary_gp __initdata;
diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c
index 1a80eee..022eb1a 100644
--- a/arch/mips/qemu/q-setup.c
+++ b/arch/mips/qemu/q-setup.c
@@ -4,6 +4,11 @@
#define QEMU_PORT_BASE 0xb4000000
+const char *get_system_type(void)
+{
+ return "Qemu";
+}
+
static void __init qemu_timer_setup(struct irqaction *irq)
{
/* set the clock to 100 Hz */
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index fa0e719..b198201 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -29,6 +29,7 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
@@ -37,42 +38,29 @@
#include <asm/sgi/mc.h>
#include <asm/sgi/ip22.h>
-#define EISA_MAX_SLOTS 4
+/* I2 has four EISA slots. */
+#define IP22_EISA_MAX_SLOTS 4
#define EISA_MAX_IRQ 16
-#define EISA_TO_PHYS(x) (0x00080000 | (x))
-#define EISA_TO_KSEG1(x) ((void *) KSEG1ADDR(EISA_TO_PHYS((x))))
+#define EIU_MODE_REG 0x0001ffc0
+#define EIU_STAT_REG 0x0001ffc4
+#define EIU_PREMPT_REG 0x0001ffc8
+#define EIU_QUIET_REG 0x0001ffcc
+#define EIU_INTRPT_ACK 0x00010004
-#define EIU_MODE_REG 0x0009ffc0
-#define EIU_STAT_REG 0x0009ffc4
-#define EIU_PREMPT_REG 0x0009ffc8
-#define EIU_QUIET_REG 0x0009ffcc
-#define EIU_INTRPT_ACK 0x00090004
-
-#define EISA_DMA1_STATUS 8
-#define EISA_INT1_CTRL 0x20
-#define EISA_INT1_MASK 0x21
-#define EISA_INT2_CTRL 0xA0
-#define EISA_INT2_MASK 0xA1
-#define EISA_DMA2_STATUS 0xD0
-#define EISA_DMA2_WRITE_SINGLE 0xD4
-#define EISA_EXT_NMI_RESET_CTRL 0x461
-#define EISA_INT1_EDGE_LEVEL 0x4D0
-#define EISA_INT2_EDGE_LEVEL 0x4D1
-#define EISA_VENDOR_ID_OFFSET 0xC80
-
-#define EIU_WRITE_32(x,y) { *((u32 *) KSEG1ADDR(x)) = (u32) (y); mb(); }
-#define EIU_READ_8(x) *((u8 *) KSEG1ADDR(x))
-#define EISA_WRITE_8(x,y) { *((u8 *) EISA_TO_KSEG1(x)) = (u8) (y); mb(); }
-#define EISA_READ_8(x) *((u8 *) EISA_TO_KSEG1(x))
-
-static char *decode_eisa_sig(u8 * sig)
+static char __init *decode_eisa_sig(unsigned long addr)
{
- static char sig_str[8];
- u16 rev;
+ static char sig_str[EISA_SIG_LEN];
+ u8 sig[4];
+ u16 rev;
+ int i;
- if (sig[0] & 0x80)
- return NULL;
+ for (i = 0; i < 4; i++) {
+ sig[i] = inb (addr + i);
+
+ if (!i && (sig[0] & 0x80))
+ return NULL;
+ }
sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
@@ -83,23 +71,26 @@
return sig_str;
}
-static void ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
{
u8 eisa_irq;
u8 dma1, dma2;
- eisa_irq = EIU_READ_8(EIU_INTRPT_ACK);
- dma1 = EISA_READ_8(EISA_DMA1_STATUS);
- dma2 = EISA_READ_8(EISA_DMA2_STATUS);
+ eisa_irq = inb(EIU_INTRPT_ACK);
+ dma1 = inb(EISA_DMA1_STATUS);
+ dma2 = inb(EISA_DMA2_STATUS);
- if (eisa_irq >= EISA_MAX_IRQ) {
- /* Oops, Bad Stuff Happened... */
- printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
-
- EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
- EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
- } else
+ if (eisa_irq < EISA_MAX_IRQ) {
do_IRQ(eisa_irq, regs);
+ return IRQ_HANDLED;
+ }
+
+ /* Oops, Bad Stuff Happened... */
+ printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
+
+ outb(0x20, EISA_INT2_CTRL);
+ outb(0x20, EISA_INT1_CTRL);
+ return IRQ_NONE;
}
static void enable_eisa1_irq(unsigned int irq)
@@ -109,9 +100,9 @@
local_irq_save(flags);
- mask = EISA_READ_8(EISA_INT1_MASK);
+ mask = inb(EISA_INT1_MASK);
mask &= ~((u8) (1 << irq));
- EISA_WRITE_8(EISA_INT1_MASK, mask);
+ outb(mask, EISA_INT1_MASK);
local_irq_restore(flags);
}
@@ -122,9 +113,9 @@
/* Only use edge interrupts for EISA */
- edge = EISA_READ_8(EISA_INT1_EDGE_LEVEL);
+ edge = inb(EISA_INT1_EDGE_LEVEL);
edge &= ~((u8) (1 << irq));
- EISA_WRITE_8(EISA_INT1_EDGE_LEVEL, edge);
+ outb(edge, EISA_INT1_EDGE_LEVEL);
enable_eisa1_irq(irq);
return 0;
@@ -134,9 +125,9 @@
{
u8 mask;
- mask = EISA_READ_8(EISA_INT1_MASK);
+ mask = inb(EISA_INT1_MASK);
mask |= ((u8) (1 << irq));
- EISA_WRITE_8(EISA_INT1_MASK, mask);
+ outb(mask, EISA_INT1_MASK);
}
#define shutdown_eisa1_irq disable_eisa1_irq
@@ -145,7 +136,7 @@
{
disable_eisa1_irq(irq);
- EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+ outb(0x20, EISA_INT1_CTRL);
}
static void end_eisa1_irq(unsigned int irq)
@@ -171,9 +162,9 @@
local_irq_save(flags);
- mask = EISA_READ_8(EISA_INT2_MASK);
+ mask = inb(EISA_INT2_MASK);
mask &= ~((u8) (1 << (irq - 8)));
- EISA_WRITE_8(EISA_INT2_MASK, mask);
+ outb(mask, EISA_INT2_MASK);
local_irq_restore(flags);
}
@@ -184,9 +175,9 @@
/* Only use edge interrupts for EISA */
- edge = EISA_READ_8(EISA_INT2_EDGE_LEVEL);
+ edge = inb(EISA_INT2_EDGE_LEVEL);
edge &= ~((u8) (1 << (irq - 8)));
- EISA_WRITE_8(EISA_INT2_EDGE_LEVEL, edge);
+ outb(edge, EISA_INT2_EDGE_LEVEL);
enable_eisa2_irq(irq);
return 0;
@@ -196,9 +187,9 @@
{
u8 mask;
- mask = EISA_READ_8(EISA_INT2_MASK);
+ mask = inb(EISA_INT2_MASK);
mask |= ((u8) (1 << (irq - 8)));
- EISA_WRITE_8(EISA_INT2_MASK, mask);
+ outb(mask, EISA_INT2_MASK);
}
#define shutdown_eisa2_irq disable_eisa2_irq
@@ -207,8 +198,7 @@
{
disable_eisa2_irq(irq);
- EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
- EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+ outb(0x20, EISA_INT2_CTRL);
}
static void end_eisa2_irq(unsigned int irq)
@@ -241,7 +231,6 @@
{
int i, c;
char *str;
- u8 *slot_addr;
if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
printk(KERN_INFO "EISA: bus not present.\n");
@@ -249,11 +238,8 @@
}
printk(KERN_INFO "EISA: Probing bus...\n");
- for (c = 0, i = 1; i <= EISA_MAX_SLOTS; i++) {
- slot_addr =
- (u8 *) EISA_TO_KSEG1((0x1000 * i) +
- EISA_VENDOR_ID_OFFSET);
- if ((str = decode_eisa_sig(slot_addr))) {
+ for (c = 0, i = 1; i <= IP22_EISA_MAX_SLOTS; i++) {
+ if ((str = decode_eisa_sig(0x1000 * i + EISA_VENDOR_ID_OFFSET))) {
printk(KERN_INFO "EISA: slot %d : %s detected.\n",
i, str);
c++;
@@ -268,25 +254,25 @@
Please wave your favorite dead chicken over the busses */
/* First say hello to the EIU */
- EIU_WRITE_32(EIU_PREMPT_REG, 0x0000FFFF);
- EIU_WRITE_32(EIU_QUIET_REG, 1);
- EIU_WRITE_32(EIU_MODE_REG, 0x40f3c07F);
+ outl(0x0000FFFF, EIU_PREMPT_REG);
+ outl(1, EIU_QUIET_REG);
+ outl(0x40f3c07F, EIU_MODE_REG);
/* Now be nice to the EISA chipset */
- EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 1);
- for (i = 0; i < 10000; i++); /* Wait long enough for the dust to settle */
- EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 0);
- EISA_WRITE_8(EISA_INT1_CTRL, 0x11);
- EISA_WRITE_8(EISA_INT2_CTRL, 0x11);
- EISA_WRITE_8(EISA_INT1_MASK, 0);
- EISA_WRITE_8(EISA_INT2_MASK, 8);
- EISA_WRITE_8(EISA_INT1_MASK, 4);
- EISA_WRITE_8(EISA_INT2_MASK, 2);
- EISA_WRITE_8(EISA_INT1_MASK, 1);
- EISA_WRITE_8(EISA_INT2_MASK, 1);
- EISA_WRITE_8(EISA_INT1_MASK, 0xfb);
- EISA_WRITE_8(EISA_INT2_MASK, 0xff);
- EISA_WRITE_8(EISA_DMA2_WRITE_SINGLE, 0);
+ outb(1, EISA_EXT_NMI_RESET_CTRL);
+ udelay(50); /* Wait long enough for the dust to settle */
+ outb(0, EISA_EXT_NMI_RESET_CTRL);
+ outb(0x11, EISA_INT1_CTRL);
+ outb(0x11, EISA_INT2_CTRL);
+ outb(0, EISA_INT1_MASK);
+ outb(8, EISA_INT2_MASK);
+ outb(4, EISA_INT1_MASK);
+ outb(2, EISA_INT2_MASK);
+ outb(1, EISA_INT1_MASK);
+ outb(1, EISA_INT2_MASK);
+ outb(0xfb, EISA_INT1_MASK);
+ outb(0xff, EISA_INT2_MASK);
+ outb(0, EISA_DMA2_WRITE_SINGLE);
for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) {
irq_desc[i].status = IRQ_DISABLED;
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 0e96a5d..5e59b4c 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -53,7 +53,7 @@
extern void ip22_be_init(void) __init;
extern void ip22_time_init(void) __init;
-static int __init ip22_setup(void)
+void __init plat_setup(void)
{
char *ctype;
@@ -137,8 +137,4 @@
}
}
#endif
-
- return 0;
}
-
-early_initcall(ip22_setup);
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
new file mode 100644
index 0000000..7b0bc44
--- /dev/null
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -0,0 +1,54 @@
+#config SGI_SN0_XXL
+# bool "IP27 XXL"
+# depends on SGI_IP27
+# This options adds support for userspace processes upto 16TB size.
+# Normally the limit is just .5TB.
+
+config SGI_SN0_N_MODE
+ bool "IP27 N-Mode"
+ depends on SGI_IP27
+ help
+ The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
+ configured in either N-Modes which allows for more nodes or M-Mode
+ which allows for more memory. Your system is most probably
+ running in M-Mode, so you should say N here.
+
+config ARCH_DISCONTIGMEM_ENABLE
+ bool
+ default y if SGI_IP27
+ help
+ Say Y to upport efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config NUMA
+ bool "NUMA Support"
+ depends on SGI_IP27
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server machines. If in doubt, say N.
+
+config MAPPED_KERNEL
+ bool "Mapped kernel support"
+ depends on SGI_IP27
+ help
+ Change the way a Linux kernel is loaded into memory on a MIPS64
+ machine. This is required in order to support text replication and
+ NUMA. If you need to understand it, read the source code.
+
+config REPLICATE_KTEXT
+ bool "Kernel text replication support"
+ depends on SGI_IP27
+ help
+ Say Y here to enable replicating the kernel text across multiple
+ nodes in a NUMA cluster. This trades memory for speed.
+
+config REPLICATE_EXHANDLERS
+ bool "Exception handler replication support"
+ depends on SGI_IP27
+ help
+ Say Y here to enable replicating the kernel exception handlers
+ across multiple nodes in a NUMA cluster. This trades memory for
+ speed.
diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c
index e1829a5..07631a9 100644
--- a/arch/mips/sgi-ip27/ip27-berr.c
+++ b/arch/mips/sgi-ip27/ip27-berr.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/signal.h> /* for SIGBUS */
#include <asm/module.h>
#include <asm/sn/addrs.h>
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index d97f5b5..3e1ac29 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -30,8 +30,10 @@
static inline struct ioc3_uartregs *console_uart(void)
{
struct ioc3 *ioc3;
+ nasid_t nasid;
- ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
+ nasid = (master_nasid == INVALID_NASID) ? get_nasid() : master_nasid;
+ ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(nasid)->memory_base;
return &ioc3->sregs.uarta;
}
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 6dcee5c..8651a0e 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -56,12 +56,12 @@
{
struct hub_data *hub = hub_data(cnode);
nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
+ int i;
cpu_set(smp_processor_id(), hub->h_cpus);
if (test_and_set_bit(cnode, hub_init_mask))
return;
-
/*
* Set CRB timeout at 5ms, (< PI timeout of 10ms)
*/
@@ -88,6 +88,24 @@
__flush_cache_all();
}
#endif
+
+ /*
+ * Some interrupts are reserved by hardware or by software convention.
+ * Mark these as reserved right away so they won't be used accidently
+ * later.
+ */
+ for (i = 0; i <= BASE_PCI_IRQ; i++) {
+ __set_bit(i, hub->irq_alloc_mask);
+ LOCAL_HUB_CLR_INTR(INT_PEND0_BASELVL + i);
+ }
+
+ __set_bit(IP_PEND0_6_63, hub->irq_alloc_mask);
+ LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
+
+ for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
+ __set_bit(i, hub->irq_alloc_mask);
+ LOCAL_HUB_CLR_INTR(INT_PEND1_BASELVL + i);
+ }
}
void __init per_cpu_init(void)
@@ -104,30 +122,12 @@
clear_c0_status(ST0_IM);
+ per_hub_init(cnode);
+
for (i = 0; i < LEVELS_PER_SLICE; i++)
si->level_to_irq[i] = -1;
/*
- * Some interrupts are reserved by hardware or by software convention.
- * Mark these as reserved right away so they won't be used accidently
- * later.
- */
- for (i = 0; i <= BASE_PCI_IRQ; i++) {
- __set_bit(i, si->irq_alloc_mask);
- LOCAL_HUB_S(PI_INT_PEND_MOD, i);
- }
-
- __set_bit(IP_PEND0_6_63, si->irq_alloc_mask);
- LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
-
- for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
- __set_bit(i, si->irq_alloc_mask + 1);
- LOCAL_HUB_S(PI_INT_PEND_MOD, i);
- }
-
- LOCAL_HUB_L(PI_INT_PEND0);
-
- /*
* We use this so we can find the local hub's data as fast as only
* possible.
*/
@@ -140,8 +140,6 @@
install_cpu_nmi_handler(cputoslice(cpu));
set_c0_status(SRB_DEV0 | SRB_DEV1);
-
- per_hub_init(cnode);
}
/*
@@ -198,7 +196,7 @@
extern void ip27_time_init(void);
extern void ip27_reboot_setup(void);
-static int __init ip27_setup(void)
+void __init plat_setup(void)
{
hubreg_t p, e, n_mode;
nasid_t nid;
@@ -245,8 +243,4 @@
set_io_port_base(IO_BASE);
board_time_init = ip27_time_init;
-
- return 0;
}
-
-early_initcall(ip27_setup);
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 61817a1..73e5e52 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -5,6 +5,9 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 1999 - 2001 Kanoj Sarcar
*/
+
+#undef DEBUG
+
#include <linux/config.h>
#include <linux/init.h>
#include <linux/irq.h>
@@ -14,11 +17,11 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/irq.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/smp_lock.h>
+#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/delay.h>
#include <linux/bitops.h>
@@ -37,13 +40,6 @@
#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
-#undef DEBUG_IRQ
-#ifdef DEBUG_IRQ
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
/*
* Linux has a controller-independent x86 interrupt architecture.
* every controller has a 'controller-template', that is used
@@ -74,14 +70,15 @@
static inline int alloc_level(int cpu, int irq)
{
+ struct hub_data *hub = hub_data(cpu_to_node(cpu));
struct slice_data *si = cpu_data[cpu].data;
- int level; /* pre-allocated entries */
+ int level;
- level = find_first_zero_bit(si->irq_alloc_mask, LEVELS_PER_SLICE);
+ level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
if (level >= LEVELS_PER_SLICE)
panic("Cpu %d flooded with devices\n", cpu);
- __set_bit(level, si->irq_alloc_mask);
+ __set_bit(level, hub->irq_alloc_mask);
si->level_to_irq[level] = irq;
return level;
@@ -216,9 +213,11 @@
{
nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
struct slice_data *si = cpu_data[cpu].data;
+ unsigned long flags;
- __set_bit(bit, si->irq_enable_mask);
+ set_bit(bit, si->irq_enable_mask);
+ local_irq_save(flags);
if (!cputoslice(cpu)) {
REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
@@ -226,6 +225,7 @@
REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
}
+ local_irq_restore(flags);
return 0;
}
@@ -235,7 +235,7 @@
nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
struct slice_data *si = cpu_data[cpu].data;
- __clear_bit(bit, si->irq_enable_mask);
+ clear_bit(bit, si->irq_enable_mask);
if (!cputoslice(cpu)) {
REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
@@ -261,7 +261,7 @@
bc = IRQ_TO_BRIDGE(irq);
bridge = bc->base;
- DBG("bridge_startup(): irq= 0x%x pin=%d\n", irq, pin);
+ pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", irq, pin);
/*
* "map" irq to a swlevel greater than 6 since the first 6 bits
* of INT_PEND0 are taken
@@ -298,12 +298,13 @@
static void shutdown_bridge_irq(unsigned int irq)
{
struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
+ struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu));
bridge_t *bridge = bc->base;
struct slice_data *si = cpu_data[bc->irq_cpu].data;
int pin, swlevel;
cpuid_t cpu;
- DBG("bridge_shutdown: irq 0x%x\n", irq);
+ pr_debug("bridge_shutdown: irq 0x%x\n", irq);
pin = SLOT_FROM_PCI_IRQ(irq);
/*
@@ -313,7 +314,7 @@
swlevel = find_level(&cpu, irq);
intr_disconnect_level(cpu, swlevel);
- __clear_bit(swlevel, si->irq_alloc_mask);
+ __clear_bit(swlevel, hub->irq_alloc_mask);
si->level_to_irq[swlevel] = -1;
bridge->b_int_enable &= ~(1 << pin);
@@ -433,25 +434,24 @@
int slice = LOCAL_HUB_L(PI_CPU_NUM);
int cpu = smp_processor_id();
struct slice_data *si = cpu_data[cpu].data;
- hubreg_t mask, set;
+ struct hub_data *hub = hub_data(cpu_to_node(cpu));
+ int resched, call;
+
+ resched = CPU_RESCHED_A_IRQ + slice;
+ __set_bit(resched, hub->irq_alloc_mask);
+ __set_bit(resched, si->irq_enable_mask);
+ LOCAL_HUB_CLR_INTR(resched);
+
+ call = CPU_CALL_A_IRQ + slice;
+ __set_bit(call, hub->irq_alloc_mask);
+ __set_bit(call, si->irq_enable_mask);
+ LOCAL_HUB_CLR_INTR(call);
if (slice == 0) {
- LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
- LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
- mask = LOCAL_HUB_L(PI_INT_MASK0_A); /* Slice A */
- set = (1UL << CPU_RESCHED_A_IRQ) | (1UL << CPU_CALL_A_IRQ);
- mask |= set;
- si->irq_enable_mask[0] |= set;
- si->irq_alloc_mask[0] |= set;
- LOCAL_HUB_S(PI_INT_MASK0_A, mask);
+ LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]);
+ LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]);
} else {
- LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
- LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
- mask = LOCAL_HUB_L(PI_INT_MASK0_B); /* Slice B */
- set = (1UL << CPU_RESCHED_B_IRQ) | (1UL << CPU_CALL_B_IRQ);
- mask |= set;
- si->irq_enable_mask[1] |= set;
- si->irq_alloc_mask[1] |= set;
- LOCAL_HUB_S(PI_INT_MASK0_B, mask);
+ LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]);
+ LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]);
}
}
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 17f768c..3a8291b 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -127,37 +127,28 @@
printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes());
}
-static void intr_clear_bits(nasid_t nasid, volatile hubreg_t *pend,
- int base_level)
+static __init void intr_clear_all(nasid_t nasid)
{
- volatile hubreg_t bits;
int i;
- /* Check pending interrupts */
- if ((bits = HUB_L(pend)) != 0)
- for (i = 0; i < N_INTPEND_BITS; i++)
- if (bits & (1 << i))
- LOCAL_HUB_CLR_INTR(base_level + i);
-}
-
-static void intr_clear_all(nasid_t nasid)
-{
REMOTE_HUB_S(nasid, PI_INT_MASK0_A, 0);
REMOTE_HUB_S(nasid, PI_INT_MASK0_B, 0);
REMOTE_HUB_S(nasid, PI_INT_MASK1_A, 0);
REMOTE_HUB_S(nasid, PI_INT_MASK1_B, 0);
- intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND0),
- INT_PEND0_BASELVL);
- intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND1),
- INT_PEND1_BASELVL);
+
+ for (i = 0; i < 128; i++)
+ REMOTE_HUB_CLR_INTR(nasid, i);
}
void __init prom_prepare_cpus(unsigned int max_cpus)
{
cnodeid_t cnode;
- for_each_online_node(cnode)
+ for_each_online_node(cnode) {
+ if (cnode == 0)
+ continue;
intr_clear_all(COMPACT_TO_NASID_NODEID(cnode));
+ }
replicate_kernel_text();
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index fc3a8e9..2eb22d69 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -163,14 +163,13 @@
#define mask_and_ack_cpu_irq disable_cpu_irq
static struct hw_interrupt_type ip32_cpu_interrupt = {
- "IP32 CPU",
- startup_cpu_irq,
- shutdown_cpu_irq,
- enable_cpu_irq,
- disable_cpu_irq,
- mask_and_ack_cpu_irq,
- end_cpu_irq,
- NULL
+ .typename = "IP32 CPU",
+ .startup = startup_cpu_irq,
+ .shutdown = shutdown_cpu_irq,
+ .enable = enable_cpu_irq,
+ .disable = disable_cpu_irq,
+ .ack = mask_and_ack_cpu_irq,
+ .end = end_cpu_irq,
};
/*
@@ -234,14 +233,13 @@
#define shutdown_crime_irq disable_crime_irq
static struct hw_interrupt_type ip32_crime_interrupt = {
- "IP32 CRIME",
- startup_crime_irq,
- shutdown_crime_irq,
- enable_crime_irq,
- disable_crime_irq,
- mask_and_ack_crime_irq,
- end_crime_irq,
- NULL
+ .typename = "IP32 CRIME",
+ .startup = startup_crime_irq,
+ .shutdown = shutdown_crime_irq,
+ .enable = enable_crime_irq,
+ .disable = disable_crime_irq,
+ .ack = mask_and_ack_crime_irq,
+ .end = end_crime_irq,
};
/*
@@ -294,14 +292,13 @@
#define mask_and_ack_macepci_irq disable_macepci_irq
static struct hw_interrupt_type ip32_macepci_interrupt = {
- "IP32 MACE PCI",
- startup_macepci_irq,
- shutdown_macepci_irq,
- enable_macepci_irq,
- disable_macepci_irq,
- mask_and_ack_macepci_irq,
- end_macepci_irq,
- NULL
+ .typename = "IP32 MACE PCI",
+ .startup = startup_macepci_irq,
+ .shutdown = shutdown_macepci_irq,
+ .enable = enable_macepci_irq,
+ .disable = disable_macepci_irq,
+ .ack = mask_and_ack_macepci_irq,
+ .end = end_macepci_irq,
};
/* This is used for MACE ISA interrupts. That means bits 4-6 in the
@@ -425,14 +422,13 @@
#define shutdown_maceisa_irq disable_maceisa_irq
static struct hw_interrupt_type ip32_maceisa_interrupt = {
- "IP32 MACE ISA",
- startup_maceisa_irq,
- shutdown_maceisa_irq,
- enable_maceisa_irq,
- disable_maceisa_irq,
- mask_and_ack_maceisa_irq,
- end_maceisa_irq,
- NULL
+ .typename = "IP32 MACE ISA",
+ .startup = startup_maceisa_irq,
+ .shutdown = shutdown_maceisa_irq,
+ .enable = enable_maceisa_irq,
+ .disable = disable_maceisa_irq,
+ .ack = mask_and_ack_maceisa_irq,
+ .end = end_maceisa_irq,
};
/* This is used for regular non-ISA, non-PCI MACE interrupts. That means
@@ -476,14 +472,13 @@
#define mask_and_ack_mace_irq disable_mace_irq
static struct hw_interrupt_type ip32_mace_interrupt = {
- "IP32 MACE",
- startup_mace_irq,
- shutdown_mace_irq,
- enable_mace_irq,
- disable_mace_irq,
- mask_and_ack_mace_irq,
- end_mace_irq,
- NULL
+ .typename = "IP32 MACE",
+ .startup = startup_mace_irq,
+ .shutdown = shutdown_mace_irq,
+ .enable = enable_mace_irq,
+ .disable = disable_mace_irq,
+ .ack = mask_and_ack_mace_irq,
+ .end = end_mace_irq,
};
static void ip32_unknown_interrupt(struct pt_regs *regs)
diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c
index fc76ca9..d37d40a 100644
--- a/arch/mips/sgi-ip32/ip32-memory.c
+++ b/arch/mips/sgi-ip32/ip32-memory.c
@@ -36,8 +36,8 @@
if (base + size > (256 << 20))
base += CRIME_HI_MEM_BASE;
- printk("CRIME MC: bank %u base 0x%016lx size %luMB\n",
- bank, base, size);
+ printk("CRIME MC: bank %u base 0x%016lx size %luMiB\n",
+ bank, base, size >> 20);
add_memory_region (base, size, BOOT_MEM_RAM);
}
}
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 8d270be..d10a269 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -92,7 +92,7 @@
setup_irq(IP32_R4K_TIMER_IRQ, irq);
}
-static int __init ip32_setup(void)
+void __init plat_setup(void)
{
board_be_init = ip32_be_init;
@@ -152,8 +152,4 @@
}
}
#endif
-
- return 0;
}
-
-early_initcall(ip32_setup);
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
new file mode 100644
index 0000000..de46f62
--- /dev/null
+++ b/arch/mips/sibyte/Kconfig
@@ -0,0 +1,161 @@
+config SIBYTE_SB1250
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_HAS_LDT
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1120
+ bool
+ select SIBYTE_BCM112X
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_BCM112X
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125H
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_BCM112X
+ select SIBYTE_HAS_LDT
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM112X
+ bool
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x80
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x55
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_SB1xxx_SOC
+ bool
+ depends on EXPERIMENTAL
+ select DMA_COHERENT
+ select SIBYTE_CFE
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+
+choice
+ prompt "SiByte SOC Stepping"
+ depends on SIBYTE_SB1xxx_SOC
+
+config CPU_SB1_PASS_1
+ bool "1250 Pass1"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+
+config CPU_SB1_PASS_2_1250
+ bool "1250 An"
+ depends on SIBYTE_SB1250
+ select CPU_SB1_PASS_2
+ help
+ Also called BCM1250 Pass 2
+
+config CPU_SB1_PASS_2_2
+ bool "1250 Bn"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+ help
+ Also called BCM1250 Pass 2.2
+
+config CPU_SB1_PASS_4
+ bool "1250 Cn"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+ help
+ Also called BCM1250 Pass 3
+
+config CPU_SB1_PASS_2_112x
+ bool "112x Hybrid"
+ depends on SIBYTE_BCM112X
+ select CPU_SB1_PASS_2
+
+config CPU_SB1_PASS_3
+ bool "112x An"
+ depends on SIBYTE_BCM112X
+ select CPU_HAS_PREFETCH
+
+endchoice
+
+config CPU_SB1_PASS_2
+ bool
+
+config SIBYTE_HAS_LDT
+ bool
+ depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
+ default y
+
+config SIMULATION
+ bool "Running under simulation"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Build a kernel suitable for running under the GDB simulator.
+ Primarily adjusts the kernel's notion of time.
+
+config CONFIG_SB1_CEX_ALWAYS_FATAL
+ bool "All cache exceptions considered fatal (no recovery attempted)"
+ depends on SIBYTE_SB1xxx_SOC
+
+config CONFIG_SB1_CERR_STALL
+ bool "Stall (rather than panic) on fatal cache error"
+ depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_CFE
+ bool "Booting from CFE"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Make use of the CFE API for enumerating available memory,
+ controlling secondary CPUs, and possibly console output.
+
+config SIBYTE_CFE_CONSOLE
+ bool "Use firmware console"
+ depends on SIBYTE_CFE
+ help
+ Use the CFE API's console write routines during boot. Other console
+ options (VT console, sb1250 duart console, etc.) should not be
+ configured.
+
+config SIBYTE_STANDALONE
+ bool
+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
+ default y
+
+config SIBYTE_STANDALONE_RAM_SIZE
+ int "Memory size (in megabytes)"
+ depends on SIBYTE_STANDALONE
+ default "32"
+
+config SIBYTE_BUS_WATCHER
+ bool "Support for Bus Watcher statistics"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Handle and keep statistics on the bus error interrupts (COR_ECC,
+ BAD_ECC, IO_BUS).
+
+config SIBYTE_BW_TRACE
+ bool "Capture bus trace before bus error"
+ depends on SIBYTE_BUS_WATCHER
+ help
+ Run a continuous bus trace, dumping the raw data as soon as
+ a ZBbus error is detected. Cannot work if ZBbus profiling
+ is turned on, and also will interfere with JTAG-based trace
+ buffer activity. Raw buffer data is dumped to console, and
+ must be processed off-line.
+
+config SIBYTE_SB1250_PROF
+ bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
+ depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_TBPROF
+ bool "Support for ZBbus profiling"
+ depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile
new file mode 100644
index 0000000..538d5a5
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/Makefile
@@ -0,0 +1,5 @@
+obj-y := setup.o irq.o irq_handler.o time.o
+
+obj-$(CONFIG_SMP) += smp.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
new file mode 100644
index 0000000..b2a1ba5
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -0,0 +1,476 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/errno.h>
+#include <asm/signal.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250.h>
+
+/*
+ * These are the routines that handle all the low level interrupt stuff.
+ * Actions handled here are: initialization of the interrupt map, requesting of
+ * interrupt lines by handlers, dispatching if interrupts to handlers, probing
+ * for interrupt lines
+ */
+
+
+#define shutdown_bcm1480_irq disable_bcm1480_irq
+static void end_bcm1480_irq(unsigned int irq);
+static void enable_bcm1480_irq(unsigned int irq);
+static void disable_bcm1480_irq(unsigned int irq);
+static unsigned int startup_bcm1480_irq(unsigned int irq);
+static void ack_bcm1480_irq(unsigned int irq);
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
+#endif
+
+#ifdef CONFIG_PCI
+extern unsigned long ht_eoi_space;
+#endif
+
+#ifdef CONFIG_KGDB
+#include <asm/gdb-stub.h>
+extern void breakpoint(void);
+static int kgdb_irq;
+#ifdef CONFIG_GDB_CONSOLE
+extern void register_gdb_console(void);
+#endif
+
+/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */
+static int kgdb_flag = 1;
+static int __init nokgdb(char *str)
+{
+ kgdb_flag = 0;
+ return 1;
+}
+__setup("nokgdb", nokgdb);
+
+/* Default to UART1 */
+int kgdb_port = 1;
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+extern char sb1250_duart_present[];
+#endif
+#endif
+
+static struct hw_interrupt_type bcm1480_irq_type = {
+ .typename = "BCM1480-IMR",
+ .startup = startup_bcm1480_irq,
+ .shutdown = shutdown_bcm1480_irq,
+ .enable = enable_bcm1480_irq,
+ .disable = disable_bcm1480_irq,
+ .ack = ack_bcm1480_irq,
+ .end = end_bcm1480_irq,
+#ifdef CONFIG_SMP
+ .set_affinity = bcm1480_set_affinity
+#endif
+};
+
+/* Store the CPU id (not the logical number) */
+int bcm1480_irq_owner[BCM1480_NR_IRQS];
+
+DEFINE_SPINLOCK(bcm1480_imr_lock);
+
+void bcm1480_mask_irq(int cpu, int irq)
+{
+ unsigned long flags;
+ u64 cur_ints,hl_spacing;
+
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ hl_spacing = 0;
+ if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+ hl_spacing = BCM1480_IMR_HL_SPACING;
+ irq -= BCM1480_NR_IRQS_HALF;
+ }
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ cur_ints |= (((u64) 1) << irq);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+void bcm1480_unmask_irq(int cpu, int irq)
+{
+ unsigned long flags;
+ u64 cur_ints,hl_spacing;
+
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ hl_spacing = 0;
+ if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+ hl_spacing = BCM1480_IMR_HL_SPACING;
+ irq -= BCM1480_NR_IRQS_HALF;
+ }
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ cur_ints &= ~(((u64) 1) << irq);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
+{
+ int i = 0, old_cpu, cpu, int_on;
+ u64 cur_ints;
+ irq_desc_t *desc = irq_desc + irq;
+ unsigned long flags;
+ unsigned int irq_dirty;
+
+ i = first_cpu(mask);
+ if (next_cpu(i, mask) <= NR_CPUS) {
+ printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
+ return;
+ }
+
+ /* Convert logical CPU to physical CPU */
+ cpu = cpu_logical_map(i);
+
+ /* Protect against other affinity changers and IMR manipulation */
+ spin_lock_irqsave(&desc->lock, flags);
+ spin_lock(&bcm1480_imr_lock);
+
+ /* Swizzle each CPU's IMR (but leave the IP selection alone) */
+ old_cpu = bcm1480_irq_owner[irq];
+ irq_dirty = irq;
+ if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+ irq_dirty -= BCM1480_NR_IRQS_HALF;
+ }
+
+ int k;
+ for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ int_on = !(cur_ints & (((u64) 1) << irq_dirty));
+ if (int_on) {
+ /* If it was on, mask it */
+ cur_ints |= (((u64) 1) << irq_dirty);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ }
+ bcm1480_irq_owner[irq] = cpu;
+ if (int_on) {
+ /* unmask for the new CPU */
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ cur_ints &= ~(((u64) 1) << irq_dirty);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ }
+ }
+ spin_unlock(&bcm1480_imr_lock);
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+#endif
+
+
+/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */
+extern void bcm1480_irq_handler(void);
+
+/*****************************************************************************/
+
+static unsigned int startup_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+
+ return 0; /* never anything pending */
+}
+
+
+static void disable_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+static void enable_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void ack_bcm1480_irq(unsigned int irq)
+{
+ u64 pending;
+ unsigned int irq_dirty;
+
+ /*
+ * If the interrupt was an HT interrupt, now is the time to
+ * clear it. NOTE: we assume the HT bridge was set up to
+ * deliver the interrupts to all CPUs (which makes affinity
+ * changing easier for us)
+ */
+ irq_dirty = irq;
+ if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+ irq_dirty -= BCM1480_NR_IRQS_HALF;
+ }
+ int k;
+ for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
+ pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
+ R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
+ pending &= ((u64)1 << (irq_dirty));
+ if (pending) {
+#ifdef CONFIG_SMP
+ int i;
+ for (i=0; i<NR_CPUS; i++) {
+ /*
+ * Clear for all CPUs so an affinity switch
+ * doesn't find an old status
+ */
+ __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
+ R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+ }
+#else
+ __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+#endif
+
+ /*
+ * Generate EOI. For Pass 1 parts, EOI is a nop. For
+ * Pass 2, the LDT world may be edge-triggered, but
+ * this EOI shouldn't hurt. If they are
+ * level-sensitive, the EOI is required.
+ */
+#ifdef CONFIG_PCI
+ if (ht_eoi_space)
+ *(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
+#endif
+ }
+ }
+ bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void end_bcm1480_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+ }
+}
+
+
+void __init init_bcm1480_irqs(void)
+{
+ int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ if (i < BCM1480_NR_IRQS) {
+ irq_desc[i].handler = &bcm1480_irq_type;
+ bcm1480_irq_owner[i] = 0;
+ } else {
+ irq_desc[i].handler = &no_irq_type;
+ }
+ }
+}
+
+
+static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ return IRQ_NONE;
+}
+
+static struct irqaction bcm1480_dummy_action = {
+ .handler = bcm1480_dummy_handler,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = "bcm1480-private",
+ .next = NULL,
+ .dev_id = 0
+};
+
+int bcm1480_steal_irq(int irq)
+{
+ irq_desc_t *desc = irq_desc + irq;
+ unsigned long flags;
+ int retval = 0;
+
+ if (irq >= BCM1480_NR_IRQS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&desc->lock,flags);
+ /* Don't allow sharing at all for these */
+ if (desc->action != NULL)
+ retval = -EBUSY;
+ else {
+ desc->action = &bcm1480_dummy_action;
+ desc->depth = 0;
+ }
+ spin_unlock_irqrestore(&desc->lock,flags);
+ return 0;
+}
+
+/*
+ * init_IRQ is called early in the boot sequence from init/main.c. It
+ * is responsible for setting up the interrupt mapper and installing the
+ * handler that will be responsible for dispatching interrupts to the
+ * "right" place.
+ */
+/*
+ * For now, map all interrupts to IP[2]. We could save
+ * some cycles by parceling out system interrupts to different
+ * IP lines, but keep it simple for bringup. We'll also direct
+ * all interrupts to a single CPU; we should probably route
+ * PCI and LDT to one cpu and everything else to the other
+ * to balance the load a bit.
+ *
+ * On the second cpu, everything is set to IP5, which is
+ * ignored, EXCEPT the mailbox interrupt. That one is
+ * set to IP[2] so it is handled. This is needed so we
+ * can do cross-cpu function calls, as requred by SMP
+ */
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+#define IMR_IP5_VAL K_BCM1480_INT_MAP_I3
+#define IMR_IP6_VAL K_BCM1480_INT_MAP_I4
+
+void __init arch_init_irq(void)
+{
+
+ unsigned int i, cpu;
+ u64 tmp;
+ unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+ STATUSF_IP1 | STATUSF_IP0;
+
+ /* Default everything to IP2 */
+ /* Start with _high registers which has no bit 0 interrupt source */
+ for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
+ }
+ }
+
+ /* Now do _low registers */
+ for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
+ }
+ }
+
+ init_bcm1480_irqs();
+
+ /*
+ * Map the high 16 bits of mailbox_0 registers to IP[3], for
+ * inter-cpu messages
+ */
+ /* Was I1 */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+ (K_BCM1480_INT_MBOX_0_0 << 3)));
+ }
+
+
+ /* Clear the mailboxes. The firmware may leave them dirty */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
+ }
+
+
+ /* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
+ tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
+ }
+ tmp = ~((u64) 0);
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
+ }
+
+ bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0);
+
+ /*
+ * Note that the timer interrupts are also mapped, but this is
+ * done in bcm1480_time_init(). Also, the profiling driver
+ * does its own management of IP7.
+ */
+
+#ifdef CONFIG_KGDB
+ imask |= STATUSF_IP6;
+#endif
+ /* Enable necessary IPs, disable the rest */
+ change_c0_status(ST0_IM, imask);
+ set_except_vector(0, bcm1480_irq_handler);
+
+#ifdef CONFIG_KGDB
+ if (kgdb_flag) {
+ kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
+
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+ sb1250_duart_present[kgdb_port] = 0;
+#endif
+ /* Setup uart 1 settings, mapper */
+ /* QQQ FIXME */
+ __raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+
+ bcm1480_steal_irq(kgdb_irq);
+ __raw_writeq(IMR_IP6_VAL,
+ IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+ (kgdb_irq<<3));
+ bcm1480_unmask_irq(0, kgdb_irq);
+
+#ifdef CONFIG_GDB_CONSOLE
+ register_gdb_console();
+#endif
+ prom_printf("Waiting for GDB on UART port %d\n", kgdb_port);
+ set_debug_traps();
+ breakpoint();
+ }
+#endif
+}
+
+#ifdef CONFIG_KGDB
+
+#include <linux/delay.h>
+
+#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+
+void bcm1480_kgdb_interrupt(struct pt_regs *regs)
+{
+ /*
+ * Clear break-change status (allow some time for the remote
+ * host to stop the break, since we would see another
+ * interrupt on the end-of-break too)
+ */
+ kstat.irqs[smp_processor_id()][kgdb_irq]++;
+ mdelay(500);
+ duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
+ M_DUART_RX_EN | M_DUART_TX_EN);
+ set_async_breakpoint(®s->cp0_epc);
+}
+
+#endif /* CONFIG_KGDB */
diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S
new file mode 100644
index 0000000..408db88
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq_handler.S
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * bcm1480_irq_handler() is the routine that is actually called when an
+ * interrupt occurs. It is installed as the exception vector handler in
+ * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
+ *
+ * In the handle we figure out which interrupts need handling, and use that
+ * to call the dispatcher, which will take care of actually calling
+ * registered handlers
+ *
+ * Note that we take care of all raised interrupts in one go at the handler.
+ * This is more BSDish than the Indy code, and also, IMHO, more sane.
+ */
+#include <linux/config.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+/*
+ * What a pain. We have to be really careful saving the upper 32 bits of any
+ * register across function calls if we don't want them trashed--since were
+ * running in -o32, the calling routing never saves the full 64 bits of a
+ * register across a function call. Being the interrupt handler, we're
+ * guaranteed that interrupts are disabled during this code so we don't have
+ * to worry about random interrupts blasting the high 32 bits.
+ */
+
+ .text
+ .set push
+ .set noreorder
+ .set noat
+ .set mips64
+ #.set mips4
+ .align 5
+ NESTED(bcm1480_irq_handler, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Set compare to count to silence count/compare timer interrupts */
+ mfc0 t1, CP0_COUNT
+ mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
+#endif
+ /* Read cause */
+ mfc0 s0, CP0_CAUSE
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Cpu performance counter interrupt is routed to IP[7] */
+ andi t1, s0, CAUSEF_IP7
+ beqz t1, 0f
+ srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */
+ and t1, t1, 0x4 /* mask to get just BD bit */
+#ifdef CONFIG_MIPS64
+ dmfc0 a0, CP0_EPC
+ daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
+#else
+ mfc0 a0, CP0_EPC
+ addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
+#endif
+ jal sbprof_cpu_intr
+ nop
+ j ret_from_irq
+ nop
+0:
+#endif
+
+ /* Timer interrupt is routed to IP[4] */
+ andi t1, s0, CAUSEF_IP4
+ beqz t1, 1f
+ nop
+ jal bcm1480_timer_interrupt
+ move a0, sp /* Pass the registers along */
+ j ret_from_irq
+ nop /* delay slot */
+1:
+
+#ifdef CONFIG_SMP
+ /* Mailbox interrupt is routed to IP[3] */
+ andi t1, s0, CAUSEF_IP3
+ beqz t1, 2f
+ nop
+ jal bcm1480_mailbox_interrupt
+ move a0, sp
+ j ret_from_irq
+ nop /* delay slot */
+2:
+#endif
+
+#ifdef CONFIG_KGDB
+ /* KGDB (uart 1) interrupt is routed to IP[6] */
+ andi t1, s0, CAUSEF_IP6
+ beqz t1, 3f
+ nop /* delay slot */
+ jal bcm1480_kgdb_interrupt
+ move a0, sp
+ j ret_from_irq
+ nop /* delay slot */
+3:
+#endif
+
+ and t1, s0, CAUSEF_IP2
+ beqz t1, 9f
+ nop
+
+ /*
+ * Default...we've hit an IP[2] interrupt, which means we've got
+ * to check the 1480 interrupt registers to figure out what to do
+ * Need to detect which CPU we're on, now that smp_affinity is
+ * supported.
+ */
+ PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
+#ifdef CONFIG_SMP
+ lw t1, TI_CPU($28)
+ sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
+ addu v0, v0, t1
+#endif
+
+ /* Read IP[2] status (get both high and low halves of status) */
+ ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
+ ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
+
+ move s2, zero /* intr number */
+ li s3, 64
+
+ beqz s0, 9f /* No interrupts. Return. */
+ move a1, sp
+
+ xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */
+ movz s2, s3, s4 /* start the intr number at 64, and */
+ movz s0, s1, s4 /* look at the low status value. */
+
+ dclz s1, s0 /* Find the next interrupt. */
+ dsubu a0, zero, s1
+ daddiu a0, a0, 63
+ jal do_IRQ
+ daddu a0, a0, s2
+
+9: j ret_from_irq
+ nop
+
+ .set pop
+ END(bcm1480_irq_handler)
diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c
new file mode 100644
index 0000000..d90a0b8
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/setup.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+unsigned int sb1_pass;
+unsigned int soc_pass;
+unsigned int soc_type;
+unsigned int periph_rev;
+unsigned int zbbus_mhz;
+
+static unsigned int part_type;
+
+static char *soc_str;
+static char *pass_str;
+
+static inline int setup_bcm1x80_bcm1x55(void);
+
+/* Setup code likely to be common to all SiByte platforms */
+
+static inline int sys_rev_decode(void)
+{
+ int ret = 0;
+
+ switch (soc_type) {
+ case K_SYS_SOC_TYPE_BCM1x80:
+ if (part_type == K_SYS_PART_BCM1480)
+ soc_str = "BCM1480";
+ else if (part_type == K_SYS_PART_BCM1280)
+ soc_str = "BCM1280";
+ else
+ soc_str = "BCM1x80";
+ ret = setup_bcm1x80_bcm1x55();
+ break;
+
+ case K_SYS_SOC_TYPE_BCM1x55:
+ if (part_type == K_SYS_PART_BCM1455)
+ soc_str = "BCM1455";
+ else if (part_type == K_SYS_PART_BCM1255)
+ soc_str = "BCM1255";
+ else
+ soc_str = "BCM1x55";
+ ret = setup_bcm1x80_bcm1x55();
+ break;
+
+ default:
+ prom_printf("Unknown part type %x\n", part_type);
+ ret = 1;
+ break;
+ }
+ return ret;
+}
+
+static inline int setup_bcm1x80_bcm1x55(void)
+{
+ int ret = 0;
+
+ switch (soc_pass) {
+ case K_SYS_REVISION_BCM1480_S0:
+ periph_rev = 1;
+ pass_str = "S0 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A1:
+ periph_rev = 1;
+ pass_str = "A1 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A2:
+ periph_rev = 1;
+ pass_str = "A2 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A3:
+ periph_rev = 1;
+ pass_str = "A3 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_B0:
+ periph_rev = 1;
+ pass_str = "B0 (pass2)";
+ break;
+ default:
+ prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+ periph_rev = 1;
+ pass_str = "Unknown Revision";
+ break;
+ }
+ return ret;
+}
+
+void bcm1480_setup(void)
+{
+ uint64_t sys_rev;
+ int plldiv;
+
+ sb1_pass = read_c0_prid() & 0xff;
+ sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+ soc_type = SYS_SOC_TYPE(sys_rev);
+ part_type = G_SYS_PART(sys_rev);
+ soc_pass = G_SYS_REVISION(sys_rev);
+
+ if (sys_rev_decode()) {
+ prom_printf("Restart after failure to identify SiByte chip\n");
+ machine_restart(NULL);
+ }
+
+ plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
+
+ prom_printf("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
+ soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
+ prom_printf("Board type: %s\n", get_system_type());
+}
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
new file mode 100644
index 0000000..584a4b3
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2001,2002,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+extern void smp_call_function_interrupt(void);
+
+/*
+ * These are routines for dealing with the bcm1480 smp capabilities
+ * independent of board/firmware
+ */
+
+static void *mailbox_0_set_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+};
+
+static void *mailbox_0_clear_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+};
+
+static void *mailbox_0_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+};
+
+/*
+ * SMP init and finish on secondary CPUs
+ */
+void bcm1480_smp_init(void)
+{
+ unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+ STATUSF_IP1 | STATUSF_IP0;
+
+ /* Set interrupt mask, but don't enable */
+ change_c0_status(ST0_IM, imask);
+}
+
+void bcm1480_smp_finish(void)
+{
+ extern void bcm1480_time_init(void);
+ bcm1480_time_init();
+ local_irq_enable();
+}
+
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+void core_send_ipi(int cpu, unsigned int action)
+{
+ __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+}
+
+void bcm1480_mailbox_interrupt(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ unsigned int action;
+
+ kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++;
+ /* Load the mailbox register to figure out what we're supposed to do */
+ action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
+
+ /* Clear the mailbox to clear the interrupt */
+ __raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
+
+ /*
+ * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
+ * interrupt will do the reschedule for us
+ */
+
+ if (action & SMP_CALL_FUNCTION)
+ smp_call_function_interrupt();
+}
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
new file mode 100644
index 0000000..e545752
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * These are routines to set up and handle interrupts from the
+ * bcm1480 general purpose timer 0. We're using the timer as a
+ * system clock, so we set it up to run at 100 Hz. On every
+ * interrupt, we update our idea of what the time of day is,
+ * then call do_timer() in the architecture-independent kernel
+ * code to do general bookkeeping (e.g. update jiffies, run
+ * bottom halves, etc.)
+ */
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+#include <asm/addrspace.h>
+#include <asm/time.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+
+extern int bcm1480_steal_irq(int irq);
+
+void bcm1480_time_init(void)
+{
+ int cpu = smp_processor_id();
+ int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+ /* Only have 4 general purpose timers */
+ if (cpu > 3) {
+ BUG();
+ }
+
+ if (!cpu) {
+ /* Use our own gettimeoffset() routine */
+ do_gettimeoffset = bcm1480_gettimeoffset;
+ }
+
+ bcm1480_mask_irq(cpu, irq);
+
+ /* Map the timer interrupt to ip[4] of this cpu */
+ __raw_writeq(IMR_IP4_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H)
+ + (irq<<3)));
+
+ /* the general purpose timer ticks at 1 Mhz independent of the rest of the system */
+ /* Disable the timer and set up the count */
+ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ __raw_writeq(
+#ifndef CONFIG_SIMULATION
+ 1000000/HZ
+#else
+ 50000/HZ
+#endif
+ , IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+
+ /* Set the timer running */
+ __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+ bcm1480_unmask_irq(cpu, irq);
+ bcm1480_steal_irq(irq);
+ /*
+ * This interrupt is "special" in that it doesn't use the request_irq
+ * way to hook the irq line. The timer interrupt is initialized early
+ * enough to make this a major pain, and it's also firing enough to
+ * warrant a bit of special case code. bcm1480_timer_interrupt is
+ * called directly from irq_handler.S when IP[4] is set during an
+ * interrupt
+ */
+}
+
+#include <asm/sibyte/sb1250.h>
+
+void bcm1480_timer_interrupt(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+ /* Reset the timer */
+ __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+ /*
+ * CPU 0 handles the global timer interrupt job
+ */
+ if (cpu == 0) {
+ ll_timer_interrupt(irq, regs);
+ }
+
+ /*
+ * every CPU should do profiling and process accouting
+ */
+ ll_local_timer_interrupt(irq, regs);
+}
+
+/*
+ * We use our own do_gettimeoffset() instead of the generic one,
+ * because the generic one does not work for SMP case.
+ * In addition, since we use general timer 0 for system time,
+ * we can get accurate intra-jiffy offset without calibration.
+ */
+unsigned long bcm1480_gettimeoffset(void)
+{
+ unsigned long count =
+ __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+
+ return 1000000/HZ - count;
+}
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
index e44ce1a..e848512 100644
--- a/arch/mips/sibyte/cfe/smp.c
+++ b/arch/mips/sibyte/cfe/smp.c
@@ -70,8 +70,15 @@
*/
void prom_init_secondary(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ extern void bcm1480_smp_init(void);
+ bcm1480_smp_init();
+#elif defined(CONFIG_SIBYTE_SB1250)
extern void sb1250_smp_init(void);
sb1250_smp_init();
+#else
+#error invalid SMP configuration
+#endif
}
/*
@@ -80,8 +87,15 @@
*/
void prom_smp_finish(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ extern void bcm1480_smp_finish(void);
+ bcm1480_smp_finish();
+#elif defined(CONFIG_SIBYTE_SB1250)
extern void sb1250_smp_finish(void);
sb1250_smp_finish();
+#else
+#error invalid SMP configuration
+#endif
}
/*
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
index 7f813ae..992e0d8 100644
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
@@ -28,6 +28,8 @@
#include <linux/fs.h>
#include <linux/errno.h>
#include <linux/reboot.h>
+#include <linux/smp_lock.h>
+#include <linux/wait.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
@@ -64,24 +66,25 @@
u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
/* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
trigger start of trace. XXX vary sampling period */
- bus_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
- scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+ __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
+ scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
/* Unfortunately, in Pass 2 we must clear all counters to knock down
a previous interrupt request. This means that bus profiling
requires ALL of the SCD perf counters. */
- bus_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is
- M_SPC_CFG_ENABLE | // enable counting
- M_SPC_CFG_CLEAR | // clear all counters
- V_SPC_CFG_SRC1(1), // counter 1 counts cycles
- IOADDR(A_SCD_PERF_CNT_CFG));
- bus_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+ __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+ // keep counters 0,2,3 as is
+ M_SPC_CFG_ENABLE | // enable counting
+ M_SPC_CFG_CLEAR | // clear all counters
+ V_SPC_CFG_SRC1(1), // counter 1 counts cycles
+ IOADDR(A_SCD_PERF_CNT_CFG));
+ __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
/* Reset the trace buffer */
- bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
#if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
/* XXXKW may want to expose control to the data-collector */
tb_options |= M_SCD_TRACE_CFG_FORCECNT;
#endif
- bus_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 1;
}
@@ -93,23 +96,30 @@
/* XXX should use XKPHYS to make writes bypass L2 */
u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
/* Read out trace */
- bus_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(M_SCD_TRACE_CFG_START_READ,
+ IOADDR(A_SCD_TRACE_CFG));
__asm__ __volatile__ ("sync" : : : "memory");
/* Loop runs backwards because bundles are read out in reverse order */
for (i = 256 * 6; i > 0; i -= 6) {
// Subscripts decrease to put bundle in the order
// t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
- p[i-1] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi
- p[i-2] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo
- p[i-3] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi
- p[i-4] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo
- p[i-5] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi
- p[i-6] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo
+ p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t2 hi
+ p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t2 lo
+ p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t1 hi
+ p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t1 lo
+ p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t0 hi
+ p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ // read t0 lo
}
if (!sbp.tb_enable) {
DBG(printk(DEVNAME ": tb_intr shutdown\n"));
- bus_writeq(M_SCD_TRACE_CFG_RESET,
- IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(M_SCD_TRACE_CFG_RESET,
+ IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0;
wake_up(&sbp.tb_sync);
} else {
@@ -118,7 +128,7 @@
} else {
/* No more trace buffer samples */
DBG(printk(DEVNAME ": tb_intr full\n"));
- bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+ __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0;
if (!sbp.tb_enable) {
wake_up(&sbp.tb_sync);
@@ -152,13 +162,11 @@
return -EBUSY;
}
/* Make sure there isn't a perf-cnt interrupt waiting */
- scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+ scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
/* Disable and clear counters, override SRC_1 */
- bus_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
- M_SPC_CFG_ENABLE |
- M_SPC_CFG_CLEAR |
- V_SPC_CFG_SRC1(1),
- IOADDR(A_SCD_PERF_CNT_CFG));
+ __raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
+ M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
+ IOADDR(A_SCD_PERF_CNT_CFG));
/* We grab this interrupt to prevent others from trying to use
it, even though we don't want to service the interrupts
@@ -172,55 +180,55 @@
/* I need the core to mask these, but the interrupt mapper to
pass them through. I am exploiting my knowledge that
cp0_status masks out IP[5]. krw */
- bus_writeq(K_INT_MAP_I3,
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
- (K_INT_PERF_CNT << 3)));
+ __raw_writeq(K_INT_MAP_I3,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+ (K_INT_PERF_CNT << 3)));
/* Initialize address traps */
- bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
- bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
/* Initialize Trace Event 0-7 */
// when interrupt
- bus_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
- bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
+ __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
/* Initialize Trace Sequence 0-7 */
// Start on event 0 (interrupt)
- bus_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
- IOADDR(A_SCD_TRACE_SEQUENCE_0));
+ __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
+ IOADDR(A_SCD_TRACE_SEQUENCE_0));
// dsamp when d used | asamp when a used
- bus_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
- K_SCD_TRSEQ_TRIGGER_ALL,
- IOADDR(A_SCD_TRACE_SEQUENCE_1));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
- bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
+ __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
+ K_SCD_TRSEQ_TRIGGER_ALL,
+ IOADDR(A_SCD_TRACE_SEQUENCE_1));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
- bus_writeq((1ULL << K_INT_PERF_CNT),
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
+ __raw_writeq(1ULL << K_INT_PERF_CNT,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
arm_tb();
@@ -231,6 +239,7 @@
int sbprof_zbprof_stop(void)
{
+ DEFINE_WAIT(wait);
DBG(printk(DEVNAME ": stopping\n"));
if (sbp.tb_enable) {
@@ -240,7 +249,9 @@
this sleep happens. */
if (sbp.tb_armed) {
DBG(printk(DEVNAME ": wait for disarm\n"));
- interruptible_sleep_on(&sbp.tb_sync);
+ prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE);
+ schedule();
+ finish_wait(&sbp.tb_sync, &wait);
DBG(printk(DEVNAME ": disarm complete\n"));
}
free_irq(K_INT_TRACE_FREEZE, &sbp);
@@ -333,13 +344,13 @@
return count;
}
-static int sbprof_tb_ioctl(struct inode *inode,
- struct file *filp,
- unsigned int command,
- unsigned long arg)
+static long sbprof_tb_ioctl(struct file *filp,
+ unsigned int command,
+ unsigned long arg)
{
int error = 0;
+ lock_kernel();
switch (command) {
case SBPROF_ZBSTART:
error = sbprof_zbprof_start(filp);
@@ -348,13 +359,17 @@
error = sbprof_zbprof_stop();
break;
case SBPROF_ZBWAITFULL:
- interruptible_sleep_on(&sbp.tb_read);
+ DEFINE_WAIT(wait);
+ prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE);
+ schedule();
+ finish_wait(&sbp.tb_read, &wait);
/* XXXKW check if interrupted? */
return put_user(TB_FULL, (int *) arg);
default:
error = -EINVAL;
break;
}
+ unlock_kernel();
return error;
}
@@ -364,7 +379,8 @@
.open = sbprof_tb_open,
.release = sbprof_tb_release,
.read = sbprof_tb_read,
- .ioctl = sbprof_tb_ioctl,
+ .unlocked_ioctl = sbprof_tb_ioctl,
+ .compat_ioctl = sbprof_tb_ioctl,
.mmap = NULL,
};
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
index 1a97e31..482dee0 100644
--- a/arch/mips/sibyte/sb1250/bus_watcher.c
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -189,7 +189,7 @@
for (i=0; i<256*6; i++)
printk("%016llx\n",
- (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ)));
+ (long long)__raw_readq(IOADDR(A_SCD_TRACE_READ)));
csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 2725b26..589537b 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -53,7 +53,7 @@
static unsigned int startup_sb1250_irq(unsigned int irq);
static void ack_sb1250_irq(unsigned int irq);
#ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, unsigned long mask);
+static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
#endif
#ifdef CONFIG_SIBYTE_HAS_LDT
@@ -71,17 +71,15 @@
#endif
static struct hw_interrupt_type sb1250_irq_type = {
- "SB1250-IMR",
- startup_sb1250_irq,
- shutdown_sb1250_irq,
- enable_sb1250_irq,
- disable_sb1250_irq,
- ack_sb1250_irq,
- end_sb1250_irq,
+ .typename = "SB1250-IMR",
+ .startup = startup_sb1250_irq,
+ .shutdown = shutdown_sb1250_irq,
+ .enable = enable_sb1250_irq,
+ .disable = disable_sb1250_irq,
+ .ack = ack_sb1250_irq,
+ .end = end_sb1250_irq,
#ifdef CONFIG_SMP
- sb1250_set_affinity
-#else
- NULL
+ .set_affinity = sb1250_set_affinity
#endif
};
@@ -96,11 +94,11 @@
u64 cur_ints;
spin_lock_irqsave(&sb1250_imr_lock, flags);
- cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
cur_ints |= (((u64) 1) << irq);
- __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}
@@ -110,32 +108,25 @@
u64 cur_ints;
spin_lock_irqsave(&sb1250_imr_lock, flags);
- cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
cur_ints &= ~(((u64) 1) << irq);
- __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}
#ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, unsigned long mask)
+static void sb1250_set_affinity(unsigned int irq, cpumask_t mask)
{
int i = 0, old_cpu, cpu, int_on;
u64 cur_ints;
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
- while (mask) {
- if (mask & 1) {
- mask >>= 1;
- break;
- }
- mask >>= 1;
- i++;
- }
+ i = first_cpu(mask);
- if (mask) {
+ if (cpus_weight(mask) > 1) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
return;
}
@@ -149,23 +140,23 @@
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = sb1250_irq_owner[irq];
- cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
- R_IMR_INTERRUPT_MASK));
+ cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
+ R_IMR_INTERRUPT_MASK));
int_on = !(cur_ints & (((u64) 1) << irq));
if (int_on) {
/* If it was on, mask it */
cur_ints |= (((u64) 1) << irq);
- __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
- R_IMR_INTERRUPT_MASK));
+ ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
+ R_IMR_INTERRUPT_MASK));
}
sb1250_irq_owner[irq] = cpu;
if (int_on) {
/* unmask for the new CPU */
- cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
cur_ints &= ~(((u64) 1) << irq);
- __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
- R_IMR_INTERRUPT_MASK));
+ ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+ R_IMR_INTERRUPT_MASK));
}
spin_unlock(&sb1250_imr_lock);
spin_unlock_irqrestore(&desc->lock, flags);
@@ -208,8 +199,8 @@
* deliver the interrupts to all CPUs (which makes affinity
* changing easier for us)
*/
- pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
- R_IMR_LDT_INTERRUPT)));
+ pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
+ R_IMR_LDT_INTERRUPT)));
pending &= ((u64)1 << (irq));
if (pending) {
int i;
@@ -224,8 +215,8 @@
* Clear for all CPUs so an affinity switch
* doesn't find an old status
*/
- bus_writeq(pending,
- IOADDR(A_IMR_REGISTER(cpu,
+ __raw_writeq(pending,
+ IOADDR(A_IMR_REGISTER(cpu,
R_IMR_LDT_INTERRUPT_CLR)));
}
@@ -340,12 +331,14 @@
/* Default everything to IP2 */
for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */
- bus_writeq(IMR_IP2_VAL,
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
- (i << 3)));
- bus_writeq(IMR_IP2_VAL,
- IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
- (i << 3)));
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_IMR_REGISTER(0,
+ R_IMR_INTERRUPT_MAP_BASE) +
+ (i << 3)));
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_IMR_REGISTER(1,
+ R_IMR_INTERRUPT_MAP_BASE) +
+ (i << 3)));
}
init_sb1250_irqs();
@@ -355,23 +348,23 @@
* inter-cpu messages
*/
/* Was I1 */
- bus_writeq(IMR_IP3_VAL,
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
- (K_INT_MBOX_0 << 3)));
- bus_writeq(IMR_IP3_VAL,
- IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
- (K_INT_MBOX_0 << 3)));
+ __raw_writeq(IMR_IP3_VAL,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+ (K_INT_MBOX_0 << 3)));
+ __raw_writeq(IMR_IP3_VAL,
+ IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
+ (K_INT_MBOX_0 << 3)));
/* Clear the mailboxes. The firmware may leave them dirty */
- bus_writeq(0xffffffffffffffffULL,
- IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
- bus_writeq(0xffffffffffffffffULL,
- IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
/* Mask everything except the mailbox registers for both cpus */
tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
- bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
- bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
+ __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
+ __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
sb1250_steal_irq(K_INT_MBOX_0);
@@ -396,12 +389,14 @@
sb1250_duart_present[kgdb_port] = 0;
#endif
/* Setup uart 1 settings, mapper */
- bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
+ __raw_writeq(M_DUART_IMR_BRK,
+ IOADDR(A_DUART_IMRREG(kgdb_port)));
sb1250_steal_irq(kgdb_irq);
- bus_writeq(IMR_IP6_VAL,
- IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
- (kgdb_irq<<3)));
+ __raw_writeq(IMR_IP6_VAL,
+ IOADDR(A_IMR_REGISTER(0,
+ R_IMR_INTERRUPT_MAP_BASE) +
+ (kgdb_irq << 3)));
sb1250_unmask_irq(0, kgdb_irq);
}
#endif
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index f8c605b..df2e266 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -153,7 +153,7 @@
int bad_config = 0;
sb1_pass = read_c0_prid() & 0xff;
- sys_rev = bus_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+ sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
soc_type = SYS_SOC_TYPE(sys_rev);
soc_pass = G_SYS_REVISION(sys_rev);
@@ -162,7 +162,7 @@
machine_restart(NULL);
}
- plldiv = G_SYS_PLL_DIV(bus_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index be91b39..f859db0 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -29,18 +29,18 @@
#include <asm/sibyte/sb1250_int.h>
static void *mailbox_set_regs[] = {
- (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
- (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
+ IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
+ IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
};
static void *mailbox_clear_regs[] = {
- (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
- (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
+ IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
+ IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
};
static void *mailbox_regs[] = {
- (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
- (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
+ IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
+ IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
};
/*
@@ -73,7 +73,7 @@
*/
void core_send_ipi(int cpu, unsigned int action)
{
- bus_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+ __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
}
void sb1250_mailbox_interrupt(struct pt_regs *regs)
@@ -83,10 +83,10 @@
kstat_this_cpu.irqs[K_INT_MBOX_0]++;
/* Load the mailbox register to figure out what we're supposed to do */
- action = (__bus_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
+ action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
/* Clear the mailbox to clear the interrupt */
- __bus_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
+ ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
/*
* Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index 8b4c848..511c89d 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -67,24 +67,24 @@
sb1250_mask_irq(cpu, irq);
/* Map the timer interrupt to ip[4] of this cpu */
- bus_writeq(IMR_IP4_VAL,
- IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
- (irq << 3)));
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+ (irq << 3)));
/* the general purpose timer ticks at 1 Mhz independent if the rest of the system */
/* Disable the timer and set up the count */
- bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
#ifdef CONFIG_SIMULATION
- bus_writeq(50000 / HZ,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+ __raw_writeq(50000 / HZ,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
#else
- bus_writeq(1000000/HZ,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+ __raw_writeq(1000000 / HZ,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
#endif
/* Set the timer running */
- bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
sb1250_unmask_irq(cpu, irq);
sb1250_steal_irq(irq);
@@ -100,25 +100,25 @@
void sb1250_timer_interrupt(struct pt_regs *regs)
{
- extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
int cpu = smp_processor_id();
int irq = K_INT_TIMER_0 + cpu;
/* Reset the timer */
- __bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
- /*
- * CPU 0 handles the global timer interrupt job
- */
if (cpu == 0) {
+ /*
+ * CPU 0 handles the global timer interrupt job
+ */
ll_timer_interrupt(irq, regs);
}
-
- /*
- * every CPU should do profiling and process accouting
- */
- ll_local_timer_interrupt(irq, regs);
+ else {
+ /*
+ * other CPUs should just do profiling and process accounting
+ */
+ ll_local_timer_interrupt(irq, regs);
+ }
}
/*
@@ -130,7 +130,7 @@
unsigned long sb1250_gettimeoffset(void)
{
unsigned long count =
- bus_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+ __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
return 1000000/HZ - count;
}
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index a686bb7..5b4fc26 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -82,59 +82,60 @@
#define M41T81REG_SQW 0x13 /* square wave register */
#define M41T81_CCR_ADDRESS 0x68
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg))
static int m41t81_read(uint8_t addr)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
- bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+ __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
}
- return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+ return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
}
static int m41t81_write(uint8_t addr, int b)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD));
- bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA));
- bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
- SMB_CSR(R_SMB_START));
+ __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+ __raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
}
/* read the same byte again to make sure it is written */
- bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
- SMB_CSR(R_SMB_START));
+ __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
return 0;
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index 981d21f..d9ff932 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -57,52 +57,52 @@
#define X1241_CCR_ADDRESS 0x6F
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg))
static int xicor_read(uint8_t addr)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
- bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
- bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+ __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
}
- return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+ return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
}
static int xicor_write(uint8_t addr, int b)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq(addr, SMB_CSR(R_SMB_CMD));
- bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
- bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
- SMB_CSR(R_SMB_START));
+ __raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+ __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
} else {
return 0;
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 4daeaa4..b614ca0 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or
@@ -39,11 +39,23 @@
#include <asm/time.h>
#include <asm/traps.h>
#include <asm/sibyte/sb1250.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
+#else
+#error invalid SiByte board configuation
+#endif
#include <asm/sibyte/sb1250_genbus.h>
#include <asm/sibyte/board.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+extern void bcm1480_setup(void);
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
extern void sb1250_setup(void);
+#else
+#error invalid SiByte board configuation
+#endif
extern int xicor_probe(void);
extern int xicor_set_time(unsigned long);
@@ -66,27 +78,34 @@
*/
/* We only need to setup the generic timer */
- sb1250_time_init();
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ bcm1480_time_init();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+ sb1250_time_init();
+#else
+#error invalid SiByte board configuation
+#endif
}
int swarm_be_handler(struct pt_regs *regs, int is_fixup)
{
if (!is_fixup && (regs->cp0_cause & 4)) {
/* Data bus error - print PA */
-#ifdef CONFIG_64BIT
- printk("DBE physical address: %010lx\n",
+ printk("DBE physical address: %010Lx\n",
__read_64bit_c0_register($26, 1));
-#else
- printk("DBE physical address: %010llx\n",
- __read_64bit_c0_split($26, 1));
-#endif
}
return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
}
-static int __init swarm_setup(void)
+void __init plat_setup(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ bcm1480_setup();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
sb1250_setup();
+#else
+#error invalid SiByte board configuation
+#endif
panic_timeout = 5; /* For debug. */
@@ -133,12 +152,8 @@
};
/* XXXKW for CFE, get lines/cols from environment */
#endif
-
- return 0;
}
-early_initcall(swarm_setup);
-
#ifdef LEDS_PHYS
#ifdef CONFIG_SIBYTE_CARMEL
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
index c1f1a9d..97c73c7 100644
--- a/arch/mips/sibyte/swarm/time.c
+++ b/arch/mips/sibyte/swarm/time.c
@@ -79,48 +79,48 @@
static int xicor_read(uint8_t addr)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
- bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
- bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+ __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
- SMB_CSR(R_SMB_START));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
}
- return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+ return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
}
static int xicor_write(uint8_t addr, int b)
{
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- bus_writeq(addr, SMB_CSR(R_SMB_CMD));
- bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
- bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
- SMB_CSR(R_SMB_START));
+ __raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+ __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+ __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+ SMB_CSR(R_SMB_START));
- while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
- if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
- bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
} else {
return 0;
@@ -228,8 +228,8 @@
/* Establish communication with the Xicor 1241 RTC */
/* XXXKW how do I share the SMBus with the I2C subsystem? */
- bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
- bus_writeq(0, SMB_CSR(R_SMB_CONTROL));
+ __raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
+ __raw_writeq(0, SMB_CSR(R_SMB_CONTROL));
if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
printk("x1241: couldn't detect on SWARM SMBus 1\n");
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 141a310..952038a 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -58,14 +58,13 @@
}
static struct hw_interrupt_type pciasic_irq_type = {
- "ASIC-PCI",
- startup_pciasic_irq,
- shutdown_pciasic_irq,
- enable_pciasic_irq,
- disable_pciasic_irq,
- mask_and_ack_pciasic_irq,
- end_pciasic_irq,
- NULL
+ .typename = "ASIC-PCI",
+ .startup = startup_pciasic_irq,
+ .shutdown = shutdown_pciasic_irq,
+ .enable = enable_pciasic_irq,
+ .disable = disable_pciasic_irq,
+ .ack = mask_and_ack_pciasic_irq,
+ .end = end_pciasic_irq,
};
/*
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 1b3f8a0..262c856 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -167,7 +167,7 @@
rtc_set_time = mc146818_set_rtc_mmss;
}
-static int __init sni_rm200_pci_setup(void)
+void __init plat_setup(void)
{
sni_pcimt_detect();
sni_pcimt_sc_init();
@@ -196,8 +196,4 @@
#ifdef CONFIG_PCI
register_pci_controller(&sni_controller);
#endif
-
- return 0;
}
-
-early_initcall(sni_rm200_pci_setup);
diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig
new file mode 100644
index 0000000..5fbbe12
--- /dev/null
+++ b/arch/mips/tx4927/Kconfig
@@ -0,0 +1,3 @@
+config TOSHIBA_FPCIB0
+ bool "FPCIB0 Backplane Support"
+ depends on TOSHIBA_RBTX4927
diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c
index 26d7c53..77c3b66 100644
--- a/arch/mips/tx4927/common/tx4927_setup.c
+++ b/arch/mips/tx4927/common/tx4927_setup.c
@@ -64,7 +64,7 @@
}
-static void __init tx4927_setup(void)
+void __init plat_setup(void)
{
board_time_init = tx4927_time_init;
board_timer_setup = tx4927_timer_setup;
@@ -76,12 +76,8 @@
toshiba_rbtx4927_setup();
}
#endif
-
- return;
}
-early_initcall(tx4927_setup);
-
void __init tx4927_time_init(void)
{
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index fc07205..990fcb2 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -77,6 +77,11 @@
#include <linux/hdreg.h>
#include <linux/ide.h>
#endif
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
#undef TOSHIBA_RBTX4927_SETUP_DEBUG
@@ -920,12 +925,30 @@
#endif /* CONFIG_PCI */
+#ifdef CONFIG_SERIAL_TXX9
+ {
+ extern int early_serial_txx9_setup(struct uart_port *port);
+ int i;
+ struct uart_port req;
+ for(i = 0; i < 2; i++) {
+ memset(&req, 0, sizeof(req));
+ req.line = i;
+ req.iotype = UPIO_MEM;
+ req.membase = (char *)(0xff1ff300 + i * 0x100);
+ req.mapbase = 0xff1ff300 + i * 0x100;
+ req.irq = 32 + i;
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ req.uartclk = 50000000;
+ early_serial_txx9_setup(&req);
+ }
+ }
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
if (strstr(argptr, "console=") == NULL) {
strcat(argptr, " console=ttyS0,38400");
}
#endif
+#endif
#ifdef CONFIG_ROOT_NFS
argptr = prom_getcmdline();
diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig
new file mode 100644
index 0000000..d90e9cd
--- /dev/null
+++ b/arch/mips/tx4938/Kconfig
@@ -0,0 +1,24 @@
+if TOSHIBA_RBTX4938
+
+comment "Multiplex Pin Select"
+choice
+ prompt "PIO[58:61]"
+ default TOSHIBA_RBTX4938_MPLEX_PIO58_61
+
+config TOSHIBA_RBTX4938_MPLEX_PIO58_61
+ bool "PIO"
+config TOSHIBA_RBTX4938_MPLEX_NAND
+ bool "NAND"
+config TOSHIBA_RBTX4938_MPLEX_ATA
+ bool "ATA"
+
+endchoice
+
+config TX4938_NAND_BOOT
+ depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
+ bool "NAND Boot Support (EXPERIMENTAL)"
+ help
+ This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
+ Select this option if you need to use NAND boot.
+
+endif
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
new file mode 100644
index 0000000..74c95c5
--- /dev/null
+++ b/arch/mips/tx4938/common/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for common code for Toshiba TX4927 based systems
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y += prom.o setup.o irq.o irq_handler.o rtc_rx5c348.o
+obj-$(CONFIG_KGDB) += dbgio.o
+
diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c
new file mode 100644
index 0000000..bea59ff
--- /dev/null
+++ b/arch/mips/tx4938/common/dbgio.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/mips/tx4938/common/dbgio.c
+ *
+ * kgdb interface for gdb
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
+ */
+
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/tx4938/tx4938_mips.h>
+
+extern u8 txx9_sio_kdbg_rd(void);
+extern int txx9_sio_kdbg_wr( u8 ch );
+
+u8 getDebugChar(void)
+{
+ return (txx9_sio_kdbg_rd());
+}
+
+int putDebugChar(u8 byte)
+{
+ return (txx9_sio_kdbg_wr(byte));
+}
+
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
new file mode 100644
index 0000000..4f90d7f
--- /dev/null
+++ b/arch/mips/tx4938/common/irq.c
@@ -0,0 +1,424 @@
+/*
+ * linux/arch/mps/tx4938/common/irq.c
+ *
+ * Common tx4938 irq handler
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/**********************************************************************************/
+/* Forwad definitions for all pic's */
+/**********************************************************************************/
+
+static unsigned int tx4938_irq_cp0_startup(unsigned int irq);
+static void tx4938_irq_cp0_shutdown(unsigned int irq);
+static void tx4938_irq_cp0_enable(unsigned int irq);
+static void tx4938_irq_cp0_disable(unsigned int irq);
+static void tx4938_irq_cp0_mask_and_ack(unsigned int irq);
+static void tx4938_irq_cp0_end(unsigned int irq);
+
+static unsigned int tx4938_irq_pic_startup(unsigned int irq);
+static void tx4938_irq_pic_shutdown(unsigned int irq);
+static void tx4938_irq_pic_enable(unsigned int irq);
+static void tx4938_irq_pic_disable(unsigned int irq);
+static void tx4938_irq_pic_mask_and_ack(unsigned int irq);
+static void tx4938_irq_pic_end(unsigned int irq);
+
+/**********************************************************************************/
+/* Kernel structs for all pic's */
+/**********************************************************************************/
+DEFINE_SPINLOCK(tx4938_cp0_lock);
+DEFINE_SPINLOCK(tx4938_pic_lock);
+
+#define TX4938_CP0_NAME "TX4938-CP0"
+static struct hw_interrupt_type tx4938_irq_cp0_type = {
+ .typename = TX4938_CP0_NAME,
+ .startup = tx4938_irq_cp0_startup,
+ .shutdown = tx4938_irq_cp0_shutdown,
+ .enable = tx4938_irq_cp0_enable,
+ .disable = tx4938_irq_cp0_disable,
+ .ack = tx4938_irq_cp0_mask_and_ack,
+ .end = tx4938_irq_cp0_end,
+ .set_affinity = NULL
+};
+
+#define TX4938_PIC_NAME "TX4938-PIC"
+static struct hw_interrupt_type tx4938_irq_pic_type = {
+ .typename = TX4938_PIC_NAME,
+ .startup = tx4938_irq_pic_startup,
+ .shutdown = tx4938_irq_pic_shutdown,
+ .enable = tx4938_irq_pic_enable,
+ .disable = tx4938_irq_pic_disable,
+ .ack = tx4938_irq_pic_mask_and_ack,
+ .end = tx4938_irq_pic_end,
+ .set_affinity = NULL
+};
+
+static struct irqaction tx4938_irq_pic_action = {
+ .handler = no_action,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = TX4938_PIC_NAME
+};
+
+/**********************************************************************************/
+/* Functions for cp0 */
+/**********************************************************************************/
+
+#define tx4938_irq_cp0_mask(irq) ( 1 << ( irq-TX4938_IRQ_CP0_BEG+8 ) )
+
+static void __init
+tx4938_irq_cp0_init(void)
+{
+ int i;
+
+ for (i = TX4938_IRQ_CP0_BEG; i <= TX4938_IRQ_CP0_END; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &tx4938_irq_cp0_type;
+ }
+
+ return;
+}
+
+static unsigned int
+tx4938_irq_cp0_startup(unsigned int irq)
+{
+ tx4938_irq_cp0_enable(irq);
+
+ return (0);
+}
+
+static void
+tx4938_irq_cp0_shutdown(unsigned int irq)
+{
+ tx4938_irq_cp0_disable(irq);
+}
+
+static void
+tx4938_irq_cp0_enable(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx4938_cp0_lock, flags);
+
+ set_c0_status(tx4938_irq_cp0_mask(irq));
+
+ spin_unlock_irqrestore(&tx4938_cp0_lock, flags);
+}
+
+static void
+tx4938_irq_cp0_disable(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx4938_cp0_lock, flags);
+
+ clear_c0_status(tx4938_irq_cp0_mask(irq));
+
+ spin_unlock_irqrestore(&tx4938_cp0_lock, flags);
+
+ return;
+}
+
+static void
+tx4938_irq_cp0_mask_and_ack(unsigned int irq)
+{
+ tx4938_irq_cp0_disable(irq);
+
+ return;
+}
+
+static void
+tx4938_irq_cp0_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ tx4938_irq_cp0_enable(irq);
+ }
+
+ return;
+}
+
+/**********************************************************************************/
+/* Functions for pic */
+/**********************************************************************************/
+
+u32
+tx4938_irq_pic_addr(int irq)
+{
+ /* MVMCP -- need to formulize this */
+ irq -= TX4938_IRQ_PIC_BEG;
+
+ switch (irq) {
+ case 17:
+ case 16:
+ case 1:
+ case 0:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL0));
+ }
+ case 19:
+ case 18:
+ case 3:
+ case 2:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL1));
+ }
+ case 21:
+ case 20:
+ case 5:
+ case 4:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL2));
+ }
+ case 23:
+ case 22:
+ case 7:
+ case 6:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL3));
+ }
+ case 25:
+ case 24:
+ case 9:
+ case 8:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL4));
+ }
+ case 27:
+ case 26:
+ case 11:
+ case 10:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL5));
+ }
+ case 29:
+ case 28:
+ case 13:
+ case 12:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL6));
+ }
+ case 31:
+ case 30:
+ case 15:
+ case 14:{
+ return (TX4938_MKA(TX4938_IRC_IRLVL7));
+ }
+ }
+
+ return (0);
+}
+
+u32
+tx4938_irq_pic_mask(int irq)
+{
+ /* MVMCP -- need to formulize this */
+ irq -= TX4938_IRQ_PIC_BEG;
+
+ switch (irq) {
+ case 31:
+ case 29:
+ case 27:
+ case 25:
+ case 23:
+ case 21:
+ case 19:
+ case 17:{
+ return (0x07000000);
+ }
+ case 30:
+ case 28:
+ case 26:
+ case 24:
+ case 22:
+ case 20:
+ case 18:
+ case 16:{
+ return (0x00070000);
+ }
+ case 15:
+ case 13:
+ case 11:
+ case 9:
+ case 7:
+ case 5:
+ case 3:
+ case 1:{
+ return (0x00000700);
+ }
+ case 14:
+ case 12:
+ case 10:
+ case 8:
+ case 6:
+ case 4:
+ case 2:
+ case 0:{
+ return (0x00000007);
+ }
+ }
+ return (0x00000000);
+}
+
+static void
+tx4938_irq_pic_modify(unsigned pic_reg, unsigned clr_bits, unsigned set_bits)
+{
+ unsigned long val = 0;
+
+ val = TX4938_RD(pic_reg);
+ val &= (~clr_bits);
+ val |= (set_bits);
+ TX4938_WR(pic_reg, val);
+ mmiowb();
+ TX4938_RD(pic_reg);
+
+ return;
+}
+
+static void __init
+tx4938_irq_pic_init(void)
+{
+ unsigned long flags;
+ int i;
+
+ for (i = TX4938_IRQ_PIC_BEG; i <= TX4938_IRQ_PIC_END; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 2;
+ irq_desc[i].handler = &tx4938_irq_pic_type;
+ }
+
+ setup_irq(TX4938_IRQ_NEST_PIC_ON_CP0, &tx4938_irq_pic_action);
+
+ spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+ TX4938_WR(0xff1ff640, 0x6); /* irq level mask -- only accept hightest */
+ TX4938_WR(0xff1ff600, TX4938_RD(0xff1ff600) | 0x1); /* irq enable */
+
+ spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+ return;
+}
+
+static unsigned int
+tx4938_irq_pic_startup(unsigned int irq)
+{
+ tx4938_irq_pic_enable(irq);
+
+ return (0);
+}
+
+static void
+tx4938_irq_pic_shutdown(unsigned int irq)
+{
+ tx4938_irq_pic_disable(irq);
+
+ return;
+}
+
+static void
+tx4938_irq_pic_enable(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+ tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq), 0,
+ tx4938_irq_pic_mask(irq));
+
+ spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+ return;
+}
+
+static void
+tx4938_irq_pic_disable(unsigned int irq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+ tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq),
+ tx4938_irq_pic_mask(irq), 0);
+
+ spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+ return;
+}
+
+static void
+tx4938_irq_pic_mask_and_ack(unsigned int irq)
+{
+ tx4938_irq_pic_disable(irq);
+
+ return;
+}
+
+static void
+tx4938_irq_pic_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ tx4938_irq_pic_enable(irq);
+ }
+
+ return;
+}
+
+/**********************************************************************************/
+/* Main init functions */
+/**********************************************************************************/
+
+void __init
+tx4938_irq_init(void)
+{
+ extern asmlinkage void tx4938_irq_handler(void);
+
+ tx4938_irq_cp0_init();
+ tx4938_irq_pic_init();
+ set_except_vector(0, tx4938_irq_handler);
+
+ return;
+}
+
+int
+tx4938_irq_nested(void)
+{
+ int sw_irq = 0;
+ u32 level2;
+
+ level2 = TX4938_RD(0xff1ff6a0);
+ if ((level2 & 0x10000) == 0) {
+ level2 &= 0x1f;
+ sw_irq = TX4938_IRQ_PIC_BEG + level2;
+ if (sw_irq == 26) {
+ {
+ extern int toshiba_rbtx4938_irq_nested(int sw_irq);
+ sw_irq = toshiba_rbtx4938_irq_nested(sw_irq);
+ }
+ }
+ }
+
+ wbflush();
+ return (sw_irq);
+}
diff --git a/arch/mips/tx4938/common/irq_handler.S b/arch/mips/tx4938/common/irq_handler.S
new file mode 100644
index 0000000..1b2f72b
--- /dev/null
+++ b/arch/mips/tx4938/common/irq_handler.S
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/mips/tx4938/common/handler.S
+ *
+ * Primary interrupt handler for tx4938 based systems
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/tx4938/rbtx4938.h>
+
+
+ .align 5
+ NESTED(tx4938_irq_handler, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 t0, CP0_CAUSE
+ mfc0 t1, CP0_STATUS
+ and t0, t1
+
+ andi t1, t0, STATUSF_IP7 /* cpu timer */
+ bnez t1, ll_ip7
+
+ /* IP6..IP3 multiplexed -- do not use */
+
+ andi t1, t0, STATUSF_IP2 /* tx4938 pic */
+ bnez t1, ll_ip2
+
+ andi t1, t0, STATUSF_IP1 /* user line 1 */
+ bnez t1, ll_ip1
+
+ andi t1, t0, STATUSF_IP0 /* user line 0 */
+ bnez t1, ll_ip0
+
+ .set reorder
+
+ nop
+ END(tx4938_irq_handler)
+
+ .align 5
+
+
+ll_ip7:
+ li a0, TX4938_IRQ_CPU_TIMER
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+
+ll_ip2:
+ jal tx4938_irq_nested
+ nop
+ beqz v0, goto_spurious_interrupt
+ nop
+ move a0, v0
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+goto_spurious_interrupt:
+ j ret_from_irq
+
+ll_ip1:
+ li a0, TX4938_IRQ_USER1
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_ip0:
+ li a0, TX4938_IRQ_USER0
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c
new file mode 100644
index 0000000..3189a65
--- /dev/null
+++ b/arch/mips/tx4938/common/prom.c
@@ -0,0 +1,129 @@
+/*
+ * linux/arch/mips/tx4938/common/prom.c
+ *
+ * common tx4938 memory interface
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/tx4938.h>
+
+static unsigned int __init
+tx4938_process_sdccr(u64 * addr)
+{
+ u64 val;
+ unsigned int sdccr_ce;
+ unsigned int sdccr_rs;
+ unsigned int sdccr_cs;
+ unsigned int sdccr_mw;
+ unsigned int rs = 0;
+ unsigned int cs = 0;
+ unsigned int mw = 0;
+ unsigned int bc = 4;
+ unsigned int msize = 0;
+
+ val = (*((vu64 *) (addr)));
+
+ /* MVMCP -- need #defs for these bits masks */
+ sdccr_ce = ((val & (1 << 10)) >> 10);
+ sdccr_rs = ((val & (3 << 5)) >> 5);
+ sdccr_cs = ((val & (7 << 2)) >> 2);
+ sdccr_mw = ((val & (1 << 0)) >> 0);
+
+ if (sdccr_ce) {
+ switch (sdccr_rs) {
+ case 0:{
+ rs = 2048;
+ break;
+ }
+ case 1:{
+ rs = 4096;
+ break;
+ }
+ case 2:{
+ rs = 8192;
+ break;
+ }
+ default:{
+ rs = 0;
+ break;
+ }
+ }
+ switch (sdccr_cs) {
+ case 0:{
+ cs = 256;
+ break;
+ }
+ case 1:{
+ cs = 512;
+ break;
+ }
+ case 2:{
+ cs = 1024;
+ break;
+ }
+ case 3:{
+ cs = 2048;
+ break;
+ }
+ case 4:{
+ cs = 4096;
+ break;
+ }
+ default:{
+ cs = 0;
+ break;
+ }
+ }
+ switch (sdccr_mw) {
+ case 0:{
+ mw = 8;
+ break;
+ } /* 8 bytes = 64 bits */
+ case 1:{
+ mw = 4;
+ break;
+ } /* 4 bytes = 32 bits */
+ }
+ }
+
+ /* bytes per chip MB per chip bank count */
+ msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));
+
+ /* MVMCP -- bc hard coded to 4 from table 9.3.1 */
+ /* boad supports bc=2 but no way to detect */
+
+ return (msize);
+}
+
+unsigned int __init
+tx4938_get_mem_size(void)
+{
+ unsigned int c0;
+ unsigned int c1;
+ unsigned int c2;
+ unsigned int c3;
+ unsigned int total;
+
+ /* MVMCP -- need #defs for these registers */
+ c0 = tx4938_process_sdccr((u64 *) 0xff1f8000);
+ c1 = tx4938_process_sdccr((u64 *) 0xff1f8008);
+ c2 = tx4938_process_sdccr((u64 *) 0xff1f8010);
+ c3 = tx4938_process_sdccr((u64 *) 0xff1f8018);
+ total = c0 + c1 + c2 + c3;
+
+ return (total);
+}
diff --git a/arch/mips/tx4938/common/rtc_rx5c348.c b/arch/mips/tx4938/common/rtc_rx5c348.c
new file mode 100644
index 0000000..d249edb
--- /dev/null
+++ b/arch/mips/tx4938/common/rtc_rx5c348.c
@@ -0,0 +1,202 @@
+/*
+ * RTC routines for RICOH Rx5C348 SPI chip.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/rtc.h>
+#include <linux/time.h>
+#include <asm/time.h>
+#include <asm/tx4938/spi.h>
+
+#define EPOCH 2000
+
+/* registers */
+#define Rx5C348_REG_SECOND 0
+#define Rx5C348_REG_MINUTE 1
+#define Rx5C348_REG_HOUR 2
+#define Rx5C348_REG_WEEK 3
+#define Rx5C348_REG_DAY 4
+#define Rx5C348_REG_MONTH 5
+#define Rx5C348_REG_YEAR 6
+#define Rx5C348_REG_ADJUST 7
+#define Rx5C348_REG_ALARM_W_MIN 8
+#define Rx5C348_REG_ALARM_W_HOUR 9
+#define Rx5C348_REG_ALARM_W_WEEK 10
+#define Rx5C348_REG_ALARM_D_MIN 11
+#define Rx5C348_REG_ALARM_D_HOUR 12
+#define Rx5C348_REG_CTL1 14
+#define Rx5C348_REG_CTL2 15
+
+/* register bits */
+#define Rx5C348_BIT_PM 0x20 /* REG_HOUR */
+#define Rx5C348_BIT_Y2K 0x80 /* REG_MONTH */
+#define Rx5C348_BIT_24H 0x20 /* REG_CTL1 */
+#define Rx5C348_BIT_XSTP 0x10 /* REG_CTL2 */
+
+/* commands */
+#define Rx5C348_CMD_W(addr) (((addr) << 4) | 0x08) /* single write */
+#define Rx5C348_CMD_R(addr) (((addr) << 4) | 0x0c) /* single read */
+#define Rx5C348_CMD_MW(addr) (((addr) << 4) | 0x00) /* burst write */
+#define Rx5C348_CMD_MR(addr) (((addr) << 4) | 0x04) /* burst read */
+
+static struct spi_dev_desc srtc_dev_desc = {
+ .baud = 1000000, /* 1.0Mbps @ Vdd 2.0V */
+ .tcss = 31,
+ .tcsh = 1,
+ .tcsr = 62,
+ /* 31us for Tcss (62us for Tcsr) is required for carry operation) */
+ .byteorder = 1, /* MSB-First */
+ .polarity = 0, /* High-Active */
+ .phase = 1, /* Shift-Then-Sample */
+
+};
+static int srtc_chipid;
+static int srtc_24h;
+
+static inline int
+spi_rtc_io(unsigned char *inbuf, unsigned char *outbuf, unsigned int count)
+{
+ unsigned char *inbufs[1], *outbufs[1];
+ unsigned int incounts[2], outcounts[2];
+ inbufs[0] = inbuf;
+ incounts[0] = count;
+ incounts[1] = 0;
+ outbufs[0] = outbuf;
+ outcounts[0] = count;
+ outcounts[1] = 0;
+ return txx9_spi_io(srtc_chipid, &srtc_dev_desc,
+ inbufs, incounts, outbufs, outcounts, 0);
+}
+
+/*
+ * Conversion between binary and BCD.
+ */
+#ifndef BCD_TO_BIN
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#endif
+
+#ifndef BIN_TO_BCD
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+#endif
+
+/* RTC-dependent code for time.c */
+
+static int
+rtc_rx5c348_set_time(unsigned long t)
+{
+ unsigned char inbuf[8];
+ struct rtc_time tm;
+ u8 year, month, day, hour, minute, second, century;
+
+ /* convert */
+ to_tm(t, &tm);
+
+ year = tm.tm_year % 100;
+ month = tm.tm_mon+1; /* tm_mon starts from 0 to 11 */
+ day = tm.tm_mday;
+ hour = tm.tm_hour;
+ minute = tm.tm_min;
+ second = tm.tm_sec;
+ century = tm.tm_year / 100;
+
+ inbuf[0] = Rx5C348_CMD_MW(Rx5C348_REG_SECOND);
+ BIN_TO_BCD(second);
+ inbuf[1] = second;
+ BIN_TO_BCD(minute);
+ inbuf[2] = minute;
+
+ if (srtc_24h) {
+ BIN_TO_BCD(hour);
+ inbuf[3] = hour;
+ } else {
+ /* hour 0 is AM12, noon is PM12 */
+ inbuf[3] = 0;
+ if (hour >= 12)
+ inbuf[3] = Rx5C348_BIT_PM;
+ hour = (hour + 11) % 12 + 1;
+ BIN_TO_BCD(hour);
+ inbuf[3] |= hour;
+ }
+ inbuf[4] = 0; /* ignore week */
+ BIN_TO_BCD(day);
+ inbuf[5] = day;
+ BIN_TO_BCD(month);
+ inbuf[6] = month;
+ if (century >= 20)
+ inbuf[6] |= Rx5C348_BIT_Y2K;
+ BIN_TO_BCD(year);
+ inbuf[7] = year;
+ /* write in one transfer to avoid data inconsistency */
+ return spi_rtc_io(inbuf, NULL, 8);
+}
+
+static unsigned long
+rtc_rx5c348_get_time(void)
+{
+ unsigned char inbuf[8], outbuf[8];
+ unsigned int year, month, day, hour, minute, second;
+
+ inbuf[0] = Rx5C348_CMD_MR(Rx5C348_REG_SECOND);
+ memset(inbuf + 1, 0, 7);
+ /* read in one transfer to avoid data inconsistency */
+ if (spi_rtc_io(inbuf, outbuf, 8))
+ return 0;
+ second = outbuf[1];
+ BCD_TO_BIN(second);
+ minute = outbuf[2];
+ BCD_TO_BIN(minute);
+ if (srtc_24h) {
+ hour = outbuf[3];
+ BCD_TO_BIN(hour);
+ } else {
+ hour = outbuf[3] & ~Rx5C348_BIT_PM;
+ BCD_TO_BIN(hour);
+ hour %= 12;
+ if (outbuf[3] & Rx5C348_BIT_PM)
+ hour += 12;
+ }
+ day = outbuf[5];
+ BCD_TO_BIN(day);
+ month = outbuf[6] & ~Rx5C348_BIT_Y2K;
+ BCD_TO_BIN(month);
+ year = outbuf[7];
+ BCD_TO_BIN(year);
+ year += EPOCH;
+
+ return mktime(year, month, day, hour, minute, second);
+}
+
+void __init
+rtc_rx5c348_init(int chipid)
+{
+ unsigned char inbuf[2], outbuf[2];
+ srtc_chipid = chipid;
+ /* turn on RTC if it is not on */
+ inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL2);
+ inbuf[1] = 0;
+ spi_rtc_io(inbuf, outbuf, 2);
+ if (outbuf[1] & Rx5C348_BIT_XSTP) {
+ inbuf[0] = Rx5C348_CMD_W(Rx5C348_REG_CTL2);
+ inbuf[1] = 0;
+ spi_rtc_io(inbuf, NULL, 2);
+ }
+
+ inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL1);
+ inbuf[1] = 0;
+ spi_rtc_io(inbuf, outbuf, 2);
+ if (outbuf[1] & Rx5C348_BIT_24H)
+ srtc_24h = 1;
+
+ /* set the function pointers */
+ rtc_get_time = rtc_rx5c348_get_time;
+ rtc_set_time = rtc_rx5c348_set_time;
+}
diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c
new file mode 100644
index 0000000..fc99295
--- /dev/null
+++ b/arch/mips/tx4938/common/setup.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/mips/tx4938/common/setup.c
+ *
+ * common tx4938 setup routines
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/time.h>
+#include <asm/tx4938/rbtx4938.h>
+
+extern void toshiba_rbtx4938_setup(void);
+extern void rbtx4938_time_init(void);
+
+void __init tx4938_setup(void);
+void __init tx4938_time_init(void);
+void __init tx4938_timer_setup(struct irqaction *irq);
+void dump_cp0(char *key);
+
+void (*__wbflush) (void);
+
+static void
+tx4938_write_buffer_flush(void)
+{
+ mmiowb();
+
+ __asm__ __volatile__(
+ ".set push\n\t"
+ ".set noreorder\n\t"
+ "lw $0,%0\n\t"
+ "nop\n\t"
+ ".set pop"
+ : /* no output */
+ : "m" (*(int *)KSEG1)
+ : "memory");
+}
+
+void __init
+plat_setup(void)
+{
+ board_time_init = tx4938_time_init;
+ board_timer_setup = tx4938_timer_setup;
+ __wbflush = tx4938_write_buffer_flush;
+ toshiba_rbtx4938_setup();
+}
+
+void __init
+tx4938_time_init(void)
+{
+ rbtx4938_time_init();
+}
+
+void __init
+tx4938_timer_setup(struct irqaction *irq)
+{
+ u32 count;
+ u32 c1;
+ u32 c2;
+
+ setup_irq(TX4938_IRQ_CPU_TIMER, irq);
+
+ c1 = read_c0_count();
+ count = c1 + (mips_hpt_frequency / HZ);
+ write_c0_compare(count);
+ c2 = read_c0_count();
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
new file mode 100644
index 0000000..2269412
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for common code for Toshiba TX4927 based systems
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y += prom.o setup.o irq.o spi_eeprom.o spi_txx9.o
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
new file mode 100644
index 0000000..230f5a9
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
@@ -0,0 +1,244 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c
+ *
+ * Toshiba RBTX4938 specific interrupt handlers
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+/*
+IRQ Device
+
+16 TX4938-CP0/00 Software 0
+17 TX4938-CP0/01 Software 1
+18 TX4938-CP0/02 Cascade TX4938-CP0
+19 TX4938-CP0/03 Multiplexed -- do not use
+20 TX4938-CP0/04 Multiplexed -- do not use
+21 TX4938-CP0/05 Multiplexed -- do not use
+22 TX4938-CP0/06 Multiplexed -- do not use
+23 TX4938-CP0/07 CPU TIMER
+
+24 TX4938-PIC/00
+25 TX4938-PIC/01
+26 TX4938-PIC/02 Cascade RBTX4938-IOC
+27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
+28 TX4938-PIC/04
+29 TX4938-PIC/05 TX4938 ETH1
+30 TX4938-PIC/06 TX4938 ETH0
+31 TX4938-PIC/07
+32 TX4938-PIC/08 TX4938 SIO 0
+33 TX4938-PIC/09 TX4938 SIO 1
+34 TX4938-PIC/10 TX4938 DMA0
+35 TX4938-PIC/11 TX4938 DMA1
+36 TX4938-PIC/12 TX4938 DMA2
+37 TX4938-PIC/13 TX4938 DMA3
+38 TX4938-PIC/14
+39 TX4938-PIC/15
+40 TX4938-PIC/16 TX4938 PCIC
+41 TX4938-PIC/17 TX4938 TMR0
+42 TX4938-PIC/18 TX4938 TMR1
+43 TX4938-PIC/19 TX4938 TMR2
+44 TX4938-PIC/20
+45 TX4938-PIC/21
+46 TX4938-PIC/22 TX4938 PCIERR
+47 TX4938-PIC/23
+48 TX4938-PIC/24
+49 TX4938-PIC/25
+50 TX4938-PIC/26
+51 TX4938-PIC/27
+52 TX4938-PIC/28
+53 TX4938-PIC/29
+54 TX4938-PIC/30
+55 TX4938-PIC/31 TX4938 SPI
+
+56 RBTX4938-IOC/00 PCI-D
+57 RBTX4938-IOC/01 PCI-C
+58 RBTX4938-IOC/02 PCI-B
+59 RBTX4938-IOC/03 PCI-A
+60 RBTX4938-IOC/04 RTC
+61 RBTX4938-IOC/05 ATA
+62 RBTX4938-IOC/06 MODEM
+63 RBTX4938-IOC/07 SWINT
+*/
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/version.h>
+#include <linux/bootmem.h>
+#include <asm/tx4938/rbtx4938.h>
+
+static unsigned int toshiba_rbtx4938_irq_ioc_startup(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_shutdown(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_mask_and_ack(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_end(unsigned int irq);
+
+DEFINE_SPINLOCK(toshiba_rbtx4938_ioc_lock);
+
+#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
+static struct hw_interrupt_type toshiba_rbtx4938_irq_ioc_type = {
+ .typename = TOSHIBA_RBTX4938_IOC_NAME,
+ .startup = toshiba_rbtx4938_irq_ioc_startup,
+ .shutdown = toshiba_rbtx4938_irq_ioc_shutdown,
+ .enable = toshiba_rbtx4938_irq_ioc_enable,
+ .disable = toshiba_rbtx4938_irq_ioc_disable,
+ .ack = toshiba_rbtx4938_irq_ioc_mask_and_ack,
+ .end = toshiba_rbtx4938_irq_ioc_end,
+ .set_affinity = NULL
+};
+
+#define TOSHIBA_RBTX4938_IOC_INTR_ENAB 0xb7f02000
+#define TOSHIBA_RBTX4938_IOC_INTR_STAT 0xb7f0200a
+
+int
+toshiba_rbtx4938_irq_nested(int sw_irq)
+{
+ u8 level3;
+
+ level3 = reg_rd08(TOSHIBA_RBTX4938_IOC_INTR_STAT) & 0xff;
+ if (level3) {
+ /* must use fls so onboard ATA has priority */
+ sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
+ }
+
+ wbflush();
+ return sw_irq;
+}
+
+static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
+ .handler = no_action,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = TOSHIBA_RBTX4938_IOC_NAME,
+};
+
+/**********************************************************************************/
+/* Functions for ioc */
+/**********************************************************************************/
+static void __init
+toshiba_rbtx4938_irq_ioc_init(void)
+{
+ int i;
+
+ for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
+ i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 3;
+ irq_desc[i].handler = &toshiba_rbtx4938_irq_ioc_type;
+ }
+
+ setup_irq(RBTX4938_IRQ_IOCINT,
+ &toshiba_rbtx4938_irq_ioc_action);
+}
+
+static unsigned int
+toshiba_rbtx4938_irq_ioc_startup(unsigned int irq)
+{
+ toshiba_rbtx4938_irq_ioc_enable(irq);
+
+ return 0;
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_shutdown(unsigned int irq)
+{
+ toshiba_rbtx4938_irq_ioc_disable(irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
+{
+ unsigned long flags;
+ volatile unsigned char v;
+
+ spin_lock_irqsave(&toshiba_rbtx4938_ioc_lock, flags);
+
+ v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+ v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+ TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v);
+ mmiowb();
+ TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+
+ spin_unlock_irqrestore(&toshiba_rbtx4938_ioc_lock, flags);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
+{
+ unsigned long flags;
+ volatile unsigned char v;
+
+ spin_lock_irqsave(&toshiba_rbtx4938_ioc_lock, flags);
+
+ v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+ v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+ TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v);
+ mmiowb();
+ TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+
+ spin_unlock_irqrestore(&toshiba_rbtx4938_ioc_lock, flags);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_mask_and_ack(unsigned int irq)
+{
+ toshiba_rbtx4938_irq_ioc_disable(irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ toshiba_rbtx4938_irq_ioc_enable(irq);
+ }
+}
+
+extern void __init txx9_spi_irqinit(int irc_irq);
+
+void __init arch_init_irq(void)
+{
+ extern void tx4938_irq_init(void);
+
+ /* Now, interrupt control disabled, */
+ /* all IRC interrupts are masked, */
+ /* all IRC interrupt mode are Low Active. */
+
+ /* mask all IOC interrupts */
+ *rbtx4938_imask_ptr = 0;
+
+ /* clear SoftInt interrupts */
+ *rbtx4938_softint_ptr = 0;
+ tx4938_irq_init();
+ toshiba_rbtx4938_irq_ioc_init();
+ /* Onboard 10M Ether: High Active */
+ TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000040);
+
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_SPI_SEL) {
+ txx9_spi_irqinit(RBTX4938_IRQ_IRC_SPI);
+ }
+
+ wbflush();
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
new file mode 100644
index 0000000..7df8b32
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c
+ *
+ * rbtx4938 specific prom routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/tx4938.h>
+
+void __init prom_init_cmdline(void)
+{
+ int argc = (int) fw_arg0;
+ char **argv = (char **) fw_arg1;
+ int i;
+
+ /* ignore all built-in args if any f/w args given */
+ if (argc > 1) {
+ *arcs_cmdline = '\0';
+ }
+
+ for (i = 1; i < argc; i++) {
+ if (i != 1) {
+ strcat(arcs_cmdline, " ");
+ }
+ strcat(arcs_cmdline, argv[i]);
+ }
+}
+
+void __init prom_init(void)
+{
+ extern int tx4938_get_mem_size(void);
+ int msize;
+#ifndef CONFIG_TX4938_NAND_BOOT
+ prom_init_cmdline();
+#endif
+ mips_machgroup = MACH_GROUP_TOSHIBA;
+ mips_machtype = MACH_TOSHIBA_RBTX4938;
+
+ msize = tx4938_get_mem_size();
+ add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+
+ return;
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+ return;
+}
+
+const char *get_system_type(void)
+{
+ return "Toshiba RBTX4938";
+}
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
new file mode 100644
index 0000000..9f1dcc8
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -0,0 +1,1035 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+ *
+ * Setup pointers to hardware-dependent routines.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <asm/wbflush.h>
+#include <asm/reboot.h>
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/rbtx4938.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
+
+extern void rbtx4938_time_init(void) __init;
+extern char * __init prom_getcmdline(void);
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
+
+/* These functions are used for rebooting or halting the machine*/
+extern void rbtx4938_machine_restart(char *command);
+extern void rbtx4938_machine_halt(void);
+extern void rbtx4938_machine_power_off(void);
+
+/* clocks */
+unsigned int txx9_master_clock;
+unsigned int txx9_cpu_clock;
+unsigned int txx9_gbus_clock;
+
+unsigned long rbtx4938_ce_base[8];
+unsigned long rbtx4938_ce_size[8];
+int txboard_pci66_mode;
+static int tx4938_pcic_trdyto; /* default: disabled */
+static int tx4938_pcic_retryto; /* default: disabled */
+static int tx4938_ccfg_toeon = 1;
+
+struct tx4938_pcic_reg *pcicptrs[4] = {
+ tx4938_pcicptr /* default setting for TX4938 */
+};
+
+static struct {
+ unsigned long base;
+ unsigned long size;
+} phys_regions[16] __initdata;
+static int num_phys_regions __initdata;
+
+#define PHYS_REGION_MINSIZE 0x10000
+
+void rbtx4938_machine_halt(void)
+{
+ printk(KERN_NOTICE "System Halted\n");
+ local_irq_disable();
+
+ while (1)
+ __asm__(".set\tmips3\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+}
+
+void rbtx4938_machine_power_off(void)
+{
+ rbtx4938_machine_halt();
+ /* no return */
+}
+
+void rbtx4938_machine_restart(char *command)
+{
+ local_irq_disable();
+
+ printk("Rebooting...");
+ *rbtx4938_softresetlock_ptr = 1;
+ *rbtx4938_sfvol_ptr = 1;
+ *rbtx4938_softreset_ptr = 1;
+ wbflush();
+
+ while(1);
+}
+
+void __init
+txboard_add_phys_region(unsigned long base, unsigned long size)
+{
+ if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
+ printk("phys_region overflow\n");
+ return;
+ }
+ phys_regions[num_phys_regions].base = base;
+ phys_regions[num_phys_regions].size = size;
+ num_phys_regions++;
+}
+unsigned long __init
+txboard_find_free_phys_region(unsigned long begin, unsigned long end,
+ unsigned long size)
+{
+ unsigned long base;
+ int i;
+
+ for (base = begin / size * size; base < end; base += size) {
+ for (i = 0; i < num_phys_regions; i++) {
+ if (phys_regions[i].size &&
+ base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
+ base + (size - 1) >= phys_regions[i].base)
+ break;
+ }
+ if (i == num_phys_regions)
+ return base;
+ }
+ return 0;
+}
+unsigned long __init
+txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
+ unsigned long *size)
+{
+ unsigned long sz, base;
+ for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
+ base = txboard_find_free_phys_region(begin, end, sz);
+ if (base) {
+ *size = sz;
+ return base;
+ }
+ }
+ return 0;
+}
+unsigned long __init
+txboard_request_phys_region_range(unsigned long begin, unsigned long end,
+ unsigned long size)
+{
+ unsigned long base;
+ base = txboard_find_free_phys_region(begin, end, size);
+ if (base)
+ txboard_add_phys_region(base, size);
+ return base;
+}
+unsigned long __init
+txboard_request_phys_region(unsigned long size)
+{
+ unsigned long base;
+ unsigned long begin = 0, end = 0x20000000; /* search low 512MB */
+ base = txboard_find_free_phys_region(begin, end, size);
+ if (base)
+ txboard_add_phys_region(base, size);
+ return base;
+}
+unsigned long __init
+txboard_request_phys_region_shrink(unsigned long *size)
+{
+ unsigned long base;
+ unsigned long begin = 0, end = 0x20000000; /* search low 512MB */
+ base = txboard_find_free_phys_region_shrink(begin, end, size);
+ if (base)
+ txboard_add_phys_region(base, *size);
+ return base;
+}
+
+#ifdef CONFIG_PCI
+void __init
+tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
+ struct pci_controller *channel,
+ unsigned long pci_io_base,
+ int extarb)
+{
+ int i;
+
+ /* Disable All Initiator Space */
+ pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
+ TX4938_PCIC_PCICCFG_G2PMEN(1)|
+ TX4938_PCIC_PCICCFG_G2PMEN(2)|
+ TX4938_PCIC_PCICCFG_G2PIOEN);
+
+ /* GB->PCI mappings */
+ pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
+ pcicptr->g2piogbase = pci_io_base |
+#ifdef __BIG_ENDIAN
+ TX4938_PCIC_G2PIOGBASE_ECHG
+#else
+ TX4938_PCIC_G2PIOGBASE_BSDIS
+#endif
+ ;
+ pcicptr->g2piopbase = 0;
+ for (i = 0; i < 3; i++) {
+ pcicptr->g2pmmask[i] = 0;
+ pcicptr->g2pmgbase[i] = 0;
+ pcicptr->g2pmpbase[i] = 0;
+ }
+ if (channel->mem_resource->end) {
+ pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
+ pcicptr->g2pmgbase[0] = channel->mem_resource->start |
+#ifdef __BIG_ENDIAN
+ TX4938_PCIC_G2PMnGBASE_ECHG
+#else
+ TX4938_PCIC_G2PMnGBASE_BSDIS
+#endif
+ ;
+ pcicptr->g2pmpbase[0] = channel->mem_resource->start;
+ }
+ /* PCI->GB mappings (I/O 256B) */
+ pcicptr->p2giopbase = 0; /* 256B */
+ pcicptr->p2giogbase = 0;
+ /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
+ pcicptr->p2gm0plbase = 0;
+ pcicptr->p2gm0pubase = 0;
+ pcicptr->p2gmgbase[0] = 0 |
+ TX4938_PCIC_P2GMnGBASE_TMEMEN |
+#ifdef __BIG_ENDIAN
+ TX4938_PCIC_P2GMnGBASE_TECHG
+#else
+ TX4938_PCIC_P2GMnGBASE_TBSDIS
+#endif
+ ;
+ /* PCI->GB mappings (MEM 16MB) */
+ pcicptr->p2gm1plbase = 0xffffffff;
+ pcicptr->p2gm1pubase = 0xffffffff;
+ pcicptr->p2gmgbase[1] = 0;
+ /* PCI->GB mappings (MEM 1MB) */
+ pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
+ pcicptr->p2gmgbase[2] = 0;
+
+ pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
+ /* Enable Initiator Memory Space */
+ if (channel->mem_resource->end)
+ pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
+ /* Enable Initiator I/O Space */
+ if (channel->io_resource->end)
+ pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
+ /* Enable Initiator Config */
+ pcicptr->pciccfg |=
+ TX4938_PCIC_PCICCFG_ICAEN |
+ TX4938_PCIC_PCICCFG_TCAR;
+
+ /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
+ pcicptr->pcicfg1 = 0;
+
+ pcicptr->g2ptocnt &= ~0xffff;
+
+ if (tx4938_pcic_trdyto >= 0) {
+ pcicptr->g2ptocnt &= ~0xff;
+ pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
+ }
+
+ if (tx4938_pcic_retryto >= 0) {
+ pcicptr->g2ptocnt &= ~0xff00;
+ pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
+ }
+
+ /* Clear All Local Bus Status */
+ pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
+ /* Enable All Local Bus Interrupts */
+ pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
+ /* Clear All Initiator Status */
+ pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
+ /* Enable All Initiator Interrupts */
+ pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
+ /* Clear All PCI Status Error */
+ pcicptr->pcistatus =
+ (pcicptr->pcistatus & 0x0000ffff) |
+ (TX4938_PCIC_PCISTATUS_ALL << 16);
+ /* Enable All PCI Status Error Interrupts */
+ pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
+
+ if (!extarb) {
+ /* Reset Bus Arbiter */
+ pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
+ pcicptr->pbabm = 0;
+ /* Enable Bus Arbiter */
+ pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
+ }
+
+ /* PCIC Int => IRC IRQ16 */
+ pcicptr->pcicfg2 =
+ (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
+
+ pcicptr->pcistatus = PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+}
+
+int __init
+tx4938_report_pciclk(void)
+{
+ unsigned long pcode = TX4938_REV_PCODE();
+ int pciclk = 0;
+ printk("TX%lx PCIC --%s PCICLK:",
+ pcode,
+ (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+
+ switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
+ case TX4938_CCFG_PCIDIVMODE_4:
+ pciclk = txx9_cpu_clock / 4; break;
+ case TX4938_CCFG_PCIDIVMODE_4_5:
+ pciclk = txx9_cpu_clock * 2 / 9; break;
+ case TX4938_CCFG_PCIDIVMODE_5:
+ pciclk = txx9_cpu_clock / 5; break;
+ case TX4938_CCFG_PCIDIVMODE_5_5:
+ pciclk = txx9_cpu_clock * 2 / 11; break;
+ case TX4938_CCFG_PCIDIVMODE_8:
+ pciclk = txx9_cpu_clock / 8; break;
+ case TX4938_CCFG_PCIDIVMODE_9:
+ pciclk = txx9_cpu_clock / 9; break;
+ case TX4938_CCFG_PCIDIVMODE_10:
+ pciclk = txx9_cpu_clock / 10; break;
+ case TX4938_CCFG_PCIDIVMODE_11:
+ pciclk = txx9_cpu_clock / 11; break;
+ }
+ printk("Internal(%dMHz)", pciclk / 1000000);
+ } else {
+ printk("External");
+ pciclk = -1;
+ }
+ printk("\n");
+ return pciclk;
+}
+
+void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
+{
+ pcicptrs[ch] = pcicptr;
+}
+
+struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
+{
+ return pcicptrs[ch];
+}
+
+static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
+ int top_bus, int busnr, int devfn)
+{
+ static struct pci_dev dev;
+ static struct pci_bus bus;
+
+ dev.sysdata = (void *)hose;
+ dev.devfn = devfn;
+ bus.number = busnr;
+ bus.ops = hose->pci_ops;
+ bus.parent = NULL;
+ dev.bus = &bus;
+
+ return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+static int early_##rw##_config_##size(struct pci_controller *hose, \
+ int top_bus, int bus, int devfn, int offset, type value) \
+{ \
+ return pci_##rw##_config_##size( \
+ fake_pci_dev(hose, top_bus, bus, devfn), \
+ offset, value); \
+}
+
+EARLY_PCI_OP(read, word, u16 *)
+
+int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
+{
+ u32 pci_devfn;
+ unsigned short vid;
+ int devfn_start = 0;
+ int devfn_stop = 0xff;
+ int cap66 = -1;
+ u16 stat;
+
+ printk("PCI: Checking 66MHz capabilities...\n");
+
+ for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
+ early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+ PCI_VENDOR_ID, &vid);
+
+ if (vid == 0xffff) continue;
+
+ /* check 66MHz capability */
+ if (cap66 < 0)
+ cap66 = 1;
+ if (cap66) {
+ early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+ PCI_STATUS, &stat);
+ if (!(stat & PCI_STATUS_66MHZ)) {
+ printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
+ current_bus, pci_devfn);
+ cap66 = 0;
+ break;
+ }
+ }
+ }
+ return cap66 > 0;
+}
+
+int __init
+tx4938_pciclk66_setup(void)
+{
+ int pciclk;
+
+ /* Assert M66EN */
+ tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
+ /* Double PCICLK (if possible) */
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+ unsigned int pcidivmode =
+ tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
+ switch (pcidivmode) {
+ case TX4938_CCFG_PCIDIVMODE_8:
+ case TX4938_CCFG_PCIDIVMODE_4:
+ pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
+ pciclk = txx9_cpu_clock / 4;
+ break;
+ case TX4938_CCFG_PCIDIVMODE_9:
+ case TX4938_CCFG_PCIDIVMODE_4_5:
+ pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
+ pciclk = txx9_cpu_clock * 2 / 9;
+ break;
+ case TX4938_CCFG_PCIDIVMODE_10:
+ case TX4938_CCFG_PCIDIVMODE_5:
+ pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
+ pciclk = txx9_cpu_clock / 5;
+ break;
+ case TX4938_CCFG_PCIDIVMODE_11:
+ case TX4938_CCFG_PCIDIVMODE_5_5:
+ default:
+ pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
+ pciclk = txx9_cpu_clock * 2 / 11;
+ break;
+ }
+ tx4938_ccfgptr->ccfg =
+ (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
+ | pcidivmode;
+ printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+ (unsigned long)tx4938_ccfgptr->ccfg);
+ } else {
+ pciclk = -1;
+ }
+ return pciclk;
+}
+
+extern struct pci_controller tx4938_pci_controller[];
+static int __init tx4938_pcibios_init(void)
+{
+ unsigned long mem_base[2];
+ unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0,TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
+ unsigned long io_base[2];
+ unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0,TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
+ /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
+ int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
+
+ PCIBIOS_MIN_IO = 0x00001000UL;
+ PCIBIOS_MIN_MEM = 0x01000000UL;
+
+ mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
+ io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
+
+ printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+ (unsigned short)(tx4938_pcicptr->pciid >> 16),
+ (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
+ (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
+ extarb ? "External" : "Internal");
+
+ /* setup PCI area */
+ tx4938_pci_controller[0].io_resource->start = io_base[0];
+ tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
+ tx4938_pci_controller[0].mem_resource->start = mem_base[0];
+ tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
+
+ set_tx4938_pcicptr(0, tx4938_pcicptr);
+
+ register_pci_controller(&tx4938_pci_controller[0]);
+
+ if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
+ printk("TX4938_CCFG_PCI66 already configured\n");
+ txboard_pci66_mode = -1; /* already configured */
+ }
+
+ /* Reset PCI Bus */
+ *rbtx4938_pcireset_ptr = 0;
+ /* Reset PCIC */
+ tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+ if (txboard_pci66_mode > 0)
+ tx4938_pciclk66_setup();
+ mdelay(10);
+ /* clear PCIC reset */
+ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+ *rbtx4938_pcireset_ptr = 1;
+ wbflush();
+ tx4938_report_pcic_status1(tx4938_pcicptr);
+
+ tx4938_report_pciclk();
+ tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+ if (txboard_pci66_mode == 0 &&
+ txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
+ /* Reset PCI Bus */
+ *rbtx4938_pcireset_ptr = 0;
+ /* Reset PCIC */
+ tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+ tx4938_pciclk66_setup();
+ mdelay(10);
+ /* clear PCIC reset */
+ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+ *rbtx4938_pcireset_ptr = 1;
+ wbflush();
+ /* Reinitialize PCIC */
+ tx4938_report_pciclk();
+ tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+ }
+
+ mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
+ io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
+ /* Reset PCIC1 */
+ tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
+ /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
+ if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
+ tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
+ else
+ tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
+ mdelay(10);
+ /* clear PCIC1 reset */
+ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+ tx4938_report_pcic_status1(tx4938_pcic1ptr);
+
+ printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
+ (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
+ (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
+ (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
+ printk("%s PCICLK:%dMHz\n",
+ (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
+ txx9_gbus_clock /
+ ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
+ 1000000);
+
+ /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
+ tx4938_pci_controller[1].io_resource->start =
+ io_base[1] - io_base[0];
+ tx4938_pci_controller[1].io_resource->end =
+ io_base[1] - io_base[0] + io_size[1] - 1;
+ tx4938_pci_controller[1].mem_resource->start = mem_base[1];
+ tx4938_pci_controller[1].mem_resource->end =
+ mem_base[1] + mem_size[1] - 1;
+ set_tx4938_pcicptr(1, tx4938_pcic1ptr);
+
+ register_pci_controller(&tx4938_pci_controller[1]);
+
+ tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
+
+ /* map ioport 0 to PCI I/O space address 0 */
+ set_io_port_base(KSEG1 + io_base[0]);
+
+ return 0;
+}
+
+arch_initcall(tx4938_pcibios_init);
+
+#endif /* CONFIG_PCI */
+
+/* SPI support */
+
+/* chip select for SPI devices */
+#define SEEPROM1_CS 7 /* PIO7 */
+#define SEEPROM2_CS 0 /* IOC */
+#define SEEPROM3_CS 1 /* IOC */
+#define SRTC_CS 2 /* IOC */
+
+static int rbtx4938_spi_cs_func(int chipid, int on)
+{
+ unsigned char bit;
+ switch (chipid) {
+ case RBTX4938_SEEPROM1_CHIPID:
+ if (on)
+ tx4938_pioptr->dout &= ~(1 << SEEPROM1_CS);
+ else
+ tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
+ return 0;
+ break;
+ case RBTX4938_SEEPROM2_CHIPID:
+ bit = (1 << SEEPROM2_CS);
+ break;
+ case RBTX4938_SEEPROM3_CHIPID:
+ bit = (1 << SEEPROM3_CS);
+ break;
+ case RBTX4938_SRTC_CHIPID:
+ bit = (1 << SRTC_CS);
+ break;
+ default:
+ return -ENODEV;
+ }
+ /* bit1,2,4 are low active, bit3 is high active */
+ *rbtx4938_spics_ptr =
+ (*rbtx4938_spics_ptr & ~bit) |
+ ((on ? (bit ^ 0x0b) : ~(bit ^ 0x0b)) & bit);
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
+
+int rbtx4938_get_tx4938_ethaddr(struct pci_dev *dev, unsigned char *addr)
+{
+ struct pci_controller *channel = (struct pci_controller *)dev->bus->sysdata;
+ static unsigned char dat[17];
+ static int read_dat = 0;
+ int ch = 0;
+
+ if (channel != &tx4938_pci_controller[1])
+ return -ENODEV;
+ /* TX4938 PCIC1 */
+ switch (PCI_SLOT(dev->devfn)) {
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+ ch = 0;
+ break;
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+ ch = 1;
+ break;
+ default:
+ return -ENODEV;
+ }
+ if (!read_dat) {
+ unsigned char sum;
+ int i;
+ read_dat = 1;
+ /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
+ if (spi_eeprom_read(RBTX4938_SEEPROM1_CHIPID,
+ 0, dat, sizeof(dat))) {
+ printk(KERN_ERR "seeprom: read error.\n");
+ } else {
+ if (strcmp(dat, "MAC") != 0)
+ printk(KERN_WARNING "seeprom: bad signature.\n");
+ for (i = 0, sum = 0; i < sizeof(dat); i++)
+ sum += dat[i];
+ if (sum)
+ printk(KERN_WARNING "seeprom: bad checksum.\n");
+ }
+ }
+ memcpy(addr, &dat[4 + 6 * ch], 6);
+ return 0;
+}
+#endif /* CONFIG_PCI */
+
+extern void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on));
+static void __init rbtx4938_spi_setup(void)
+{
+ /* set SPI_SEL */
+ tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
+ /* chip selects for SPI devices */
+ tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
+ tx4938_pioptr->dir |= (1 << SEEPROM1_CS);
+ txx9_spi_init(TX4938_SPI_REG, rbtx4938_spi_cs_func);
+}
+
+static struct resource rbtx4938_fpga_resource;
+
+static char pcode_str[8];
+static struct resource tx4938_reg_resource = {
+ pcode_str, TX4938_REG_BASE, TX4938_REG_BASE+TX4938_REG_SIZE, IORESOURCE_MEM
+};
+
+void __init tx4938_board_setup(void)
+{
+ int i;
+ unsigned long divmode;
+ int cpuclk = 0;
+ unsigned long pcode = TX4938_REV_PCODE();
+
+ ioport_resource.start = 0x1000;
+ ioport_resource.end = 0xffffffff;
+ iomem_resource.start = 0x1000;
+ iomem_resource.end = 0xffffffff; /* expand to 4GB */
+
+ sprintf(pcode_str, "TX%lx", pcode);
+ /* SDRAMC,EBUSC are configured by PROM */
+ for (i = 0; i < 8; i++) {
+ if (!(tx4938_ebuscptr->cr[i] & 0x8))
+ continue; /* disabled */
+ rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
+ txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
+ }
+
+ /* clocks */
+ if (txx9_master_clock) {
+ /* calculate gbus_clock and cpu_clock from master_clock */
+ divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+ switch (divmode) {
+ case TX4938_CCFG_DIVMODE_8:
+ case TX4938_CCFG_DIVMODE_10:
+ case TX4938_CCFG_DIVMODE_12:
+ case TX4938_CCFG_DIVMODE_16:
+ case TX4938_CCFG_DIVMODE_18:
+ txx9_gbus_clock = txx9_master_clock * 4; break;
+ default:
+ txx9_gbus_clock = txx9_master_clock;
+ }
+ switch (divmode) {
+ case TX4938_CCFG_DIVMODE_2:
+ case TX4938_CCFG_DIVMODE_8:
+ cpuclk = txx9_gbus_clock * 2; break;
+ case TX4938_CCFG_DIVMODE_2_5:
+ case TX4938_CCFG_DIVMODE_10:
+ cpuclk = txx9_gbus_clock * 5 / 2; break;
+ case TX4938_CCFG_DIVMODE_3:
+ case TX4938_CCFG_DIVMODE_12:
+ cpuclk = txx9_gbus_clock * 3; break;
+ case TX4938_CCFG_DIVMODE_4:
+ case TX4938_CCFG_DIVMODE_16:
+ cpuclk = txx9_gbus_clock * 4; break;
+ case TX4938_CCFG_DIVMODE_4_5:
+ case TX4938_CCFG_DIVMODE_18:
+ cpuclk = txx9_gbus_clock * 9 / 2; break;
+ }
+ txx9_cpu_clock = cpuclk;
+ } else {
+ if (txx9_cpu_clock == 0) {
+ txx9_cpu_clock = 300000000; /* 300MHz */
+ }
+ /* calculate gbus_clock and master_clock from cpu_clock */
+ cpuclk = txx9_cpu_clock;
+ divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+ switch (divmode) {
+ case TX4938_CCFG_DIVMODE_2:
+ case TX4938_CCFG_DIVMODE_8:
+ txx9_gbus_clock = cpuclk / 2; break;
+ case TX4938_CCFG_DIVMODE_2_5:
+ case TX4938_CCFG_DIVMODE_10:
+ txx9_gbus_clock = cpuclk * 2 / 5; break;
+ case TX4938_CCFG_DIVMODE_3:
+ case TX4938_CCFG_DIVMODE_12:
+ txx9_gbus_clock = cpuclk / 3; break;
+ case TX4938_CCFG_DIVMODE_4:
+ case TX4938_CCFG_DIVMODE_16:
+ txx9_gbus_clock = cpuclk / 4; break;
+ case TX4938_CCFG_DIVMODE_4_5:
+ case TX4938_CCFG_DIVMODE_18:
+ txx9_gbus_clock = cpuclk * 2 / 9; break;
+ }
+ switch (divmode) {
+ case TX4938_CCFG_DIVMODE_8:
+ case TX4938_CCFG_DIVMODE_10:
+ case TX4938_CCFG_DIVMODE_12:
+ case TX4938_CCFG_DIVMODE_16:
+ case TX4938_CCFG_DIVMODE_18:
+ txx9_master_clock = txx9_gbus_clock / 4; break;
+ default:
+ txx9_master_clock = txx9_gbus_clock;
+ }
+ }
+ /* change default value to udelay/mdelay take reasonable time */
+ loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+ /* CCFG */
+ /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
+ tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
+ /* clear PCIC1 reset */
+ if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
+ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+
+ /* enable Timeout BusError */
+ if (tx4938_ccfg_toeon)
+ tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
+
+ /* DMA selection */
+ tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
+
+ /* Use external clock for external arbiter */
+ if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
+ tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
+
+ printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
+ pcode_str,
+ cpuclk / 1000000, txx9_master_clock / 1000000,
+ (unsigned long)tx4938_ccfgptr->crir,
+ tx4938_ccfgptr->ccfg,
+ tx4938_ccfgptr->pcfg);
+
+ printk("%s SDRAMC --", pcode_str);
+ for (i = 0; i < 4; i++) {
+ unsigned long long cr = tx4938_sdramcptr->cr[i];
+ unsigned long ram_base, ram_size;
+ if (!((unsigned long)cr & 0x00000400))
+ continue; /* disabled */
+ ram_base = (unsigned long)(cr >> 49) << 21;
+ ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
+ if (ram_base >= 0x20000000)
+ continue; /* high memory (ignore) */
+ printk(" CR%d:%016Lx", i, cr);
+ txboard_add_phys_region(ram_base, ram_size);
+ }
+ printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
+
+ /* SRAM */
+ if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
+ unsigned int size = 0x800;
+ unsigned long base =
+ (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
+ txboard_add_phys_region(base, size);
+ }
+
+ /* IRC */
+ /* disable interrupt control */
+ tx4938_ircptr->cer = 0;
+
+ /* TMR */
+ /* disable all timers */
+ for (i = 0; i < TX4938_NR_TMR; i++) {
+ tx4938_tmrptr(i)->tcr = 0x00000020;
+ tx4938_tmrptr(i)->tisr = 0;
+ tx4938_tmrptr(i)->cpra = 0xffffffff;
+ tx4938_tmrptr(i)->itmr = 0;
+ tx4938_tmrptr(i)->ccdr = 0;
+ tx4938_tmrptr(i)->pgmr = 0;
+ }
+
+ /* enable DMA */
+ TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN);
+ TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN);
+
+ /* PIO */
+ tx4938_pioptr->maskcpu = 0;
+ tx4938_pioptr->maskext = 0;
+
+ /* TX4938 internal registers */
+ if (request_resource(&iomem_resource, &tx4938_reg_resource))
+ printk("request resource for internal registers failed\n");
+}
+
+#ifdef CONFIG_PCI
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
+{
+ unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
+ unsigned long g2pstatus = pcicptr->g2pstatus;
+ unsigned long pcicstatus = pcicptr->pcicstatus;
+ static struct {
+ unsigned long flag;
+ const char *str;
+ } pcistat_tbl[] = {
+ { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" },
+ { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" },
+ { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" },
+ { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" },
+ { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" },
+ { PCI_STATUS_PARITY, "MasterParityError" },
+ }, g2pstat_tbl[] = {
+ { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" },
+ { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" },
+ }, pcicstat_tbl[] = {
+ { TX4938_PCIC_PCICSTATUS_PME, "PME" },
+ { TX4938_PCIC_PCICSTATUS_TLB, "TLB" },
+ { TX4938_PCIC_PCICSTATUS_NIB, "NIB" },
+ { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" },
+ { TX4938_PCIC_PCICSTATUS_PERR, "PERR" },
+ { TX4938_PCIC_PCICSTATUS_SERR, "SERR" },
+ { TX4938_PCIC_PCICSTATUS_GBE, "GBE" },
+ { TX4938_PCIC_PCICSTATUS_IWB, "IWB" },
+ };
+ int i;
+
+ printk("pcistat:%04x(", pcistatus);
+ for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
+ if (pcistatus & pcistat_tbl[i].flag)
+ printk("%s ", pcistat_tbl[i].str);
+ printk("), g2pstatus:%08lx(", g2pstatus);
+ for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
+ if (g2pstatus & g2pstat_tbl[i].flag)
+ printk("%s ", g2pstat_tbl[i].str);
+ printk("), pcicstatus:%08lx(", pcicstatus);
+ for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
+ if (pcicstatus & pcicstat_tbl[i].flag)
+ printk("%s ", pcicstat_tbl[i].str);
+ printk(")\n");
+}
+
+void tx4938_report_pcic_status(void)
+{
+ int i;
+ struct tx4938_pcic_reg *pcicptr;
+ for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
+ tx4938_report_pcic_status1(pcicptr);
+}
+
+#endif /* CONFIG_PCI */
+
+/* We use onchip r4k counter or TMR timer as our system wide timer
+ * interrupt running at 100HZ. */
+
+extern void __init rtc_rx5c348_init(int chipid);
+void __init rbtx4938_time_init(void)
+{
+ rtc_rx5c348_init(RBTX4938_SRTC_CHIPID);
+ mips_hpt_frequency = txx9_cpu_clock / 2;
+}
+
+void __init toshiba_rbtx4938_setup(void)
+{
+ unsigned long long pcfg;
+ char *argptr;
+
+ iomem_resource.end = 0xffffffff; /* 4GB */
+
+ if (txx9_master_clock == 0)
+ txx9_master_clock = 25000000; /* 25MHz */
+ tx4938_board_setup();
+ /* setup irq stuff */
+ TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000000); /* irq trigger */
+ TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM1), 0x00000000); /* irq trigger */
+ /* setup serial stuff */
+ TX4938_WR(0xff1ff314, 0x00000000); /* h/w flow control off */
+ TX4938_WR(0xff1ff414, 0x00000000); /* h/w flow control off */
+
+#ifndef CONFIG_PCI
+ set_io_port_base(RBTX4938_ETHER_BASE);
+#endif
+
+#ifdef CONFIG_SERIAL_TXX9
+ {
+ extern int early_serial_txx9_setup(struct uart_port *port);
+ int i;
+ struct uart_port req;
+ for(i = 0; i < 2; i++) {
+ memset(&req, 0, sizeof(req));
+ req.line = i;
+ req.iotype = UPIO_MEM;
+ req.membase = (char *)(0xff1ff300 + i * 0x100);
+ req.mapbase = 0xff1ff300 + i * 0x100;
+ req.irq = 32 + i;
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ req.uartclk = 50000000;
+ early_serial_txx9_setup(&req);
+ }
+ }
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+ argptr = prom_getcmdline();
+ if (strstr(argptr, "console=") == NULL) {
+ strcat(argptr, " console=ttyS0,38400");
+ }
+#endif
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
+ printk("PIOSEL: disabling both ata and nand selection\n");
+ local_irq_disable();
+ tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
+ printk("PIOSEL: enabling nand selection\n");
+ tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
+ tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
+ printk("PIOSEL: enabling ata selection\n");
+ tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
+ tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
+#endif
+
+#ifdef CONFIG_IP_PNP
+ argptr = prom_getcmdline();
+ if (strstr(argptr, "ip=") == NULL) {
+ strcat(argptr, " ip=any");
+ }
+#endif
+
+
+#ifdef CONFIG_FB
+ {
+ conswitchp = &dummy_con;
+ }
+#endif
+
+ rbtx4938_spi_setup();
+ pcfg = tx4938_ccfgptr->pcfg; /* updated */
+ /* fixup piosel */
+ if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+ TX4938_PCFG_ATA_SEL) {
+ *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x04;
+ }
+ else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+ TX4938_PCFG_NDF_SEL) {
+ *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x08;
+ }
+ else {
+ *rbtx4938_piosel_ptr &= ~(0x08 | 0x04);
+ }
+
+ rbtx4938_fpga_resource.name = "FPGA Registers";
+ rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
+ rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
+ rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
+ printk("request resource for fpga failed\n");
+
+ /* disable all OnBoard I/O interrupts */
+ *rbtx4938_imask_ptr = 0;
+
+ _machine_restart = rbtx4938_machine_restart;
+ _machine_halt = rbtx4938_machine_halt;
+ _machine_power_off = rbtx4938_machine_power_off;
+
+ *rbtx4938_led_ptr = 0xff;
+ printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
+ printk(" DIPSW:%02x,%02x\n",
+ *rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr);
+}
+
+#ifdef CONFIG_PROC_FS
+extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid);
+static int __init tx4938_spi_proc_setup(void)
+{
+ struct proc_dir_entry *tx4938_spi_eeprom_dir;
+
+ tx4938_spi_eeprom_dir = proc_mkdir("spi_eeprom", 0);
+
+ if (!tx4938_spi_eeprom_dir)
+ return -ENOMEM;
+
+ /* don't allow user access to RBTX4938_SEEPROM1_CHIPID
+ * as it contains eth0 and eth1 MAC addresses
+ */
+ spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM2_CHIPID);
+ spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM3_CHIPID);
+
+ return 0;
+}
+
+__initcall(tx4938_spi_proc_setup);
+#endif
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
new file mode 100644
index 0000000..951a208
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
@@ -0,0 +1,219 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <asm/tx4938/spi.h>
+#include <asm/tx4938/tx4938.h>
+
+/* ATMEL 250x0 instructions */
+#define ATMEL_WREN 0x06
+#define ATMEL_WRDI 0x04
+#define ATMEL_RDSR 0x05
+#define ATMEL_WRSR 0x01
+#define ATMEL_READ 0x03
+#define ATMEL_WRITE 0x02
+
+#define ATMEL_SR_BSY 0x01
+#define ATMEL_SR_WEN 0x02
+#define ATMEL_SR_BP0 0x04
+#define ATMEL_SR_BP1 0x08
+
+DEFINE_SPINLOCK(spi_eeprom_lock);
+
+static struct spi_dev_desc seeprom_dev_desc = {
+ .baud = 1500000, /* 1.5Mbps */
+ .tcss = 1,
+ .tcsh = 1,
+ .tcsr = 1,
+ .byteorder = 1, /* MSB-First */
+ .polarity = 0, /* High-Active */
+ .phase = 0, /* Sample-Then-Shift */
+
+};
+static inline int
+spi_eeprom_io(int chipid,
+ unsigned char **inbufs, unsigned int *incounts,
+ unsigned char **outbufs, unsigned int *outcounts)
+{
+ return txx9_spi_io(chipid, &seeprom_dev_desc,
+ inbufs, incounts, outbufs, outcounts, 0);
+}
+
+int spi_eeprom_write_enable(int chipid, int enable)
+{
+ unsigned char inbuf[1];
+ unsigned char *inbufs[1];
+ unsigned int incounts[2];
+ unsigned long flags;
+ int stat;
+ inbuf[0] = enable ? ATMEL_WREN : ATMEL_WRDI;
+ inbufs[0] = inbuf;
+ incounts[0] = sizeof(inbuf);
+ incounts[1] = 0;
+ spin_lock_irqsave(&spi_eeprom_lock, flags);
+ stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL);
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ return stat;
+}
+
+static int spi_eeprom_read_status_nolock(int chipid)
+{
+ unsigned char inbuf[2], outbuf[2];
+ unsigned char *inbufs[1], *outbufs[1];
+ unsigned int incounts[2], outcounts[2];
+ int stat;
+ inbuf[0] = ATMEL_RDSR;
+ inbuf[1] = 0;
+ inbufs[0] = inbuf;
+ incounts[0] = sizeof(inbuf);
+ incounts[1] = 0;
+ outbufs[0] = outbuf;
+ outcounts[0] = sizeof(outbuf);
+ outcounts[1] = 0;
+ stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts);
+ if (stat < 0)
+ return stat;
+ return outbuf[1];
+}
+
+int spi_eeprom_read_status(int chipid)
+{
+ unsigned long flags;
+ int stat;
+ spin_lock_irqsave(&spi_eeprom_lock, flags);
+ stat = spi_eeprom_read_status_nolock(chipid);
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ return stat;
+}
+
+int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len)
+{
+ unsigned char inbuf[2];
+ unsigned char *inbufs[2], *outbufs[2];
+ unsigned int incounts[2], outcounts[3];
+ unsigned long flags;
+ int stat;
+ inbuf[0] = ATMEL_READ;
+ inbuf[1] = address;
+ inbufs[0] = inbuf;
+ inbufs[1] = NULL;
+ incounts[0] = sizeof(inbuf);
+ incounts[1] = 0;
+ outbufs[0] = NULL;
+ outbufs[1] = buf;
+ outcounts[0] = 2;
+ outcounts[1] = len;
+ outcounts[2] = 0;
+ spin_lock_irqsave(&spi_eeprom_lock, flags);
+ stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts);
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ return stat;
+}
+
+int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len)
+{
+ unsigned char inbuf[2];
+ unsigned char *inbufs[2];
+ unsigned int incounts[3];
+ unsigned long flags;
+ int i, stat;
+
+ if (address / 8 != (address + len - 1) / 8)
+ return -EINVAL;
+ stat = spi_eeprom_write_enable(chipid, 1);
+ if (stat < 0)
+ return stat;
+ stat = spi_eeprom_read_status(chipid);
+ if (stat < 0)
+ return stat;
+ if (!(stat & ATMEL_SR_WEN))
+ return -EPERM;
+
+ inbuf[0] = ATMEL_WRITE;
+ inbuf[1] = address;
+ inbufs[0] = inbuf;
+ inbufs[1] = buf;
+ incounts[0] = sizeof(inbuf);
+ incounts[1] = len;
+ incounts[2] = 0;
+ spin_lock_irqsave(&spi_eeprom_lock, flags);
+ stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL);
+ if (stat < 0)
+ goto unlock_return;
+
+ /* write start. max 10ms */
+ for (i = 10; i > 0; i--) {
+ int stat = spi_eeprom_read_status_nolock(chipid);
+ if (stat < 0)
+ goto unlock_return;
+ if (!(stat & ATMEL_SR_BSY))
+ break;
+ mdelay(1);
+ }
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ if (i == 0)
+ return -EIO;
+ return len;
+ unlock_return:
+ spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+ return stat;
+}
+
+#ifdef CONFIG_PROC_FS
+#define MAX_SIZE 0x80 /* for ATMEL 25010 */
+static int spi_eeprom_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ unsigned int size = MAX_SIZE;
+ if (spi_eeprom_read((int)data, 0, (unsigned char *)page, size) < 0)
+ size = 0;
+ return size;
+}
+
+static int spi_eeprom_write_proc(struct file *file, const char *buffer,
+ unsigned long count, void *data)
+{
+ unsigned int size = MAX_SIZE;
+ int i;
+ if (file->f_pos >= size)
+ return -EIO;
+ if (file->f_pos + count > size)
+ count = size - file->f_pos;
+ for (i = 0; i < count; i += 8) {
+ int len = count - i < 8 ? count - i : 8;
+ if (spi_eeprom_write((int)data, file->f_pos,
+ (unsigned char *)buffer, len) < 0) {
+ count = -EIO;
+ break;
+ }
+ buffer += len;
+ file->f_pos += len;
+ }
+ return count;
+}
+
+__init void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid)
+{
+ struct proc_dir_entry *entry;
+ char name[128];
+ sprintf(name, "seeprom-%d", chipid);
+ entry = create_proc_entry(name, 0600, dir);
+ if (entry) {
+ entry->read_proc = spi_eeprom_read_proc;
+ entry->write_proc = spi_eeprom_write_proc;
+ entry->data = (void *)chipid;
+ }
+}
+#endif /* CONFIG_PROC_FS */
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
new file mode 100644
index 0000000..fae3136
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
@@ -0,0 +1,159 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <asm/tx4938/spi.h>
+#include <asm/tx4938/tx4938.h>
+
+static int (*txx9_spi_cs_func)(int chipid, int on);
+static DEFINE_SPINLOCK(txx9_spi_lock);
+
+extern unsigned int txx9_gbus_clock;
+
+#define SPI_FIFO_SIZE 4
+
+void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on))
+{
+ txx9_spi_cs_func = cs_func;
+ /* enter config mode */
+ tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(txx9_spi_wait);
+static void txx9_spi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* disable rx intr */
+ tx4938_spiptr->cr0 &= ~TXx9_SPCR0_RBSIE;
+ wake_up(&txx9_spi_wait);
+}
+static struct irqaction txx9_spi_action = {
+ txx9_spi_interrupt, 0, 0, "spi", NULL, NULL,
+};
+
+void __init txx9_spi_irqinit(int irc_irq)
+{
+ setup_irq(irc_irq, &txx9_spi_action);
+}
+
+int txx9_spi_io(int chipid, struct spi_dev_desc *desc,
+ unsigned char **inbufs, unsigned int *incounts,
+ unsigned char **outbufs, unsigned int *outcounts,
+ int cansleep)
+{
+ unsigned int incount, outcount;
+ unsigned char *inp, *outp;
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&txx9_spi_lock, flags);
+ if ((tx4938_spiptr->mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE) {
+ spin_unlock_irqrestore(&txx9_spi_lock, flags);
+ return -EBUSY;
+ }
+ /* enter config mode */
+ tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+ tx4938_spiptr->cr0 =
+ (desc->byteorder ? TXx9_SPCR0_SBOS : 0) |
+ (desc->polarity ? TXx9_SPCR0_SPOL : 0) |
+ (desc->phase ? TXx9_SPCR0_SPHA : 0) |
+ 0x08;
+ tx4938_spiptr->cr1 =
+ (((TXX9_IMCLK + desc->baud) / (2 * desc->baud) - 1) << 8) |
+ 0x08 /* 8 bit only */;
+ /* enter active mode */
+ tx4938_spiptr->mcr = TXx9_SPMCR_ACTIVE;
+ spin_unlock_irqrestore(&txx9_spi_lock, flags);
+
+ /* CS ON */
+ if ((ret = txx9_spi_cs_func(chipid, 1)) < 0) {
+ spin_unlock_irqrestore(&txx9_spi_lock, flags);
+ return ret;
+ }
+ udelay(desc->tcss);
+
+ /* do scatter IO */
+ inp = inbufs ? *inbufs : NULL;
+ outp = outbufs ? *outbufs : NULL;
+ incount = 0;
+ outcount = 0;
+ while (1) {
+ unsigned char data;
+ unsigned int count;
+ int i;
+ if (!incount) {
+ incount = incounts ? *incounts++ : 0;
+ inp = (incount && inbufs) ? *inbufs++ : NULL;
+ }
+ if (!outcount) {
+ outcount = outcounts ? *outcounts++ : 0;
+ outp = (outcount && outbufs) ? *outbufs++ : NULL;
+ }
+ if (!inp && !outp)
+ break;
+ count = SPI_FIFO_SIZE;
+ if (incount)
+ count = min(count, incount);
+ if (outcount)
+ count = min(count, outcount);
+
+ /* now tx must be idle... */
+ while (!(tx4938_spiptr->sr & TXx9_SPSR_SIDLE))
+ ;
+
+ tx4938_spiptr->cr0 =
+ (tx4938_spiptr->cr0 & ~TXx9_SPCR0_RXIFL_MASK) |
+ ((count - 1) << 12);
+ if (cansleep) {
+ /* enable rx intr */
+ tx4938_spiptr->cr0 |= TXx9_SPCR0_RBSIE;
+ }
+ /* send */
+ for (i = 0; i < count; i++)
+ tx4938_spiptr->dr = inp ? *inp++ : 0;
+ /* wait all rx data */
+ if (cansleep) {
+ wait_event(txx9_spi_wait,
+ tx4938_spiptr->sr & TXx9_SPSR_SRRDY);
+ } else {
+ while (!(tx4938_spiptr->sr & TXx9_SPSR_RBSI))
+ ;
+ }
+ /* receive */
+ for (i = 0; i < count; i++) {
+ data = tx4938_spiptr->dr;
+ if (outp)
+ *outp++ = data;
+ }
+ if (incount)
+ incount -= count;
+ if (outcount)
+ outcount -= count;
+ }
+
+ /* CS OFF */
+ udelay(desc->tcsh);
+ txx9_spi_cs_func(chipid, 0);
+ udelay(desc->tcsr);
+
+ spin_lock_irqsave(&txx9_spi_lock, flags);
+ /* enter config mode */
+ tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+ spin_unlock_irqrestore(&txx9_spi_lock, flags);
+
+ return 0;
+}
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
new file mode 100644
index 0000000..a7add16
--- /dev/null
+++ b/arch/mips/vr41xx/Kconfig
@@ -0,0 +1,88 @@
+config CASIO_E55
+ bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select ISA
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config IBM_WORKPAD
+ bool "Support for IBM WorkPad z50"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select ISA
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config NEC_CMBVR4133
+ bool "Support for NEC CMB-VR4133"
+ depends on MACH_VR41XX
+ select CPU_VR41XX
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select HW_HAS_PCI
+
+config ROCKHOPPER
+ bool "Support for Rockhopper baseboard"
+ depends on NEC_CMBVR4133
+ select I8259
+ select HAVE_STD_PC_SERIAL_PORT
+
+config TANBAC_TB022X
+ bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ The TANBAC VR4131 multichip module(TB0225) and
+ the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/>
+ about VR4131 multichip module and VR4131DIMM.
+
+config TANBAC_TB0226
+ bool "Support for TANBAC Mbase(TB0226)"
+ depends on TANBAC_TB022X
+ select GPIO_VR41XX
+ help
+ The TANBAC Mbase(TB0226) is a MIPS-based platform
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/> about Mbase.
+
+config TANBAC_TB0287
+ bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
+ depends on TANBAC_TB022X
+ help
+ The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
+
+config VICTOR_MPC30X
+ bool "Support for Victor MP-C303/304"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config ZAO_CAPCELLA
+ bool "Support for ZAO Networks Capcella"
+ depends on MACH_VR41XX
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PCI_VR41XX
+ bool "Add PCI control unit support of NEC VR4100 series"
+ depends on MACH_VR41XX && HW_HAS_PCI
+ default y
+ select PCI
+
+config VRC4173
+ tristate "Add NEC VRC4173 companion chip support"
+ depends on MACH_VR41XX && PCI_VR41XX
+ help
+ The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index fcd3cb8..d758e43 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -69,7 +69,7 @@
static void __iomem *cmu_base;
static uint16_t cmuclkmsk, cmuclkmsk2;
-static spinlock_t cmu_lock;
+static DEFINE_SPINLOCK(cmu_lock);
#define cmu_read(offset) readw(cmu_base + (offset))
#define cmu_write(offset, value) writew((value), cmu_base + (offset))
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index e03be89..578f649 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -58,6 +58,14 @@
board_timer_setup = setup_timer_irq;
}
+void __init plat_setup(void)
+{
+ vr41xx_calculate_clock_frequency();
+
+ timer_init();
+ iomem_resource_init();
+}
+
void __init prom_init(void)
{
int argc, i;
@@ -71,12 +79,6 @@
if (i < (argc - 1))
strcat(arcs_cmdline, " ");
}
-
- vr41xx_calculate_clock_frequency();
-
- timer_init();
-
- iomem_resource_init();
}
unsigned long __init prom_free_prom_memory (void)
diff --git a/arch/mips/vr41xx/common/vrc4173.c b/arch/mips/vr41xx/common/vrc4173.c
index ba58764..462a9af 100644
--- a/arch/mips/vr41xx/common/vrc4173.c
+++ b/arch/mips/vr41xx/common/vrc4173.c
@@ -81,8 +81,8 @@
static int vrc4173_initialized;
static uint16_t vrc4173_cmuclkmsk;
static uint16_t vrc4173_selectreg;
-static spinlock_t vrc4173_cmu_lock;
-static spinlock_t vrc4173_giu_lock;
+static DEFINE_SPINLOCK(vrc4173_cmu_lock);
+static DEFINE_SPINLOCK(vrc4173_giu_lock);
static inline void set_cmusrst(uint16_t val)
{
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
index db686ce..53272a5 100644
--- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c
+++ b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
@@ -56,7 +56,7 @@
extern void i8259_init(void);
-static int __init nec_cmbvr4133_setup(void)
+static void __init nec_cmbvr4133_setup(void)
{
#ifdef CONFIG_ROCKHOPPER
extern void disable_pcnet(void);
@@ -90,7 +90,4 @@
#ifdef CONFIG_ROCKHOPPER
i8259_init();
#endif
- return 0;
}
-
-early_initcall(nec_cmbvr4133_setup);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 0b07922..874a283 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,10 +47,10 @@
config ISA_DMA_API
bool
- default y
config ARCH_MAY_HAVE_PC_FDC
bool
+ depends on BROKEN
default y
source "init/Kconfig"
@@ -154,13 +154,14 @@
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous memory support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on 64BIT && EXPERIMENTAL
help
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
+source "kernel/Kconfig.hz"
source "mm/Kconfig"
config PREEMPT
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 3b339b1..9b7e424 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -20,7 +20,8 @@
CHECKFLAGS += -D__hppa__=1
ifdef CONFIG_64BIT
-CROSS_COMPILE := hppa64-linux-
+CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
+ echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
else
@@ -34,6 +35,14 @@
OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
+GCC_VERSION := $(call cc-version)
+ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),)
+$(error Sorry, couldn't find ($(cc-version)).)
+endif
+ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),)
+$(error Sorry, your compiler is too old ($(GCC_VERSION)). GCC v3.3 or above is required.)
+endif
+
cflags-y := -pipe
# These flags should be implied by an hppa-linux configuration, but they
@@ -43,7 +52,7 @@
# Currently we save and restore fpregs on all kernel entry/interruption paths.
# If that gets optimized, we might need to disable the use of fpregs in the
# kernel.
-#cflags-y += -mdisable-fpregs
+cflags-y += -mdisable-fpregs
# Without this, "ld -r" results in .text sections that are too big
# (> 0x40000) for branches to reach stubs.
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 6efaa92..3e013f5 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,12 +1,16 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:20:32 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:34 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -15,35 +19,40 @@
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -65,9 +74,18 @@
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -81,8 +99,6 @@
# CONFIG_GSC_WAX is not set
# CONFIG_EISA is not set
# CONFIG_PCI is not set
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -90,12 +106,15 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
+# PCI Hotplug Support
#
#
-# PCI Hotplug Support
+# PA-RISC specific drivers
#
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -104,137 +123,7 @@
CONFIG_BINFMT_MISC=m
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_ZALON is not set
-CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -243,12 +132,14 @@
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -262,8 +153,10 @@
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -272,6 +165,7 @@
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
@@ -279,11 +173,14 @@
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -307,21 +204,23 @@
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
@@ -333,6 +232,7 @@
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -340,10 +240,11 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -362,10 +263,6 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -373,17 +270,162 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+CONFIG_SCSI_LASI700=y
+CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_ZALON is not set
+CONFIG_SCSI_DEBUG=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
@@ -391,6 +433,7 @@
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@@ -414,6 +457,7 @@
#
# CONFIG_STRIP is not set
# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Wan interfaces
@@ -431,6 +475,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -460,19 +506,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -483,6 +516,7 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
@@ -494,6 +528,19 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -511,7 +558,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -546,12 +592,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -562,10 +610,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -579,28 +637,36 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
#
# Logo configuration
@@ -610,6 +676,7 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -657,10 +724,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -671,10 +734,20 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
@@ -682,20 +755,24 @@
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -722,14 +799,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -754,16 +828,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -778,6 +855,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -838,13 +916,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -865,6 +949,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -882,9 +967,14 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 30fc03e..955ef50 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc4-pa1
-# Wed Feb 16 11:32:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:54 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -10,6 +10,7 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -19,26 +20,32 @@
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -74,7 +82,19 @@
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
CONFIG_COMPAT=y
CONFIG_NR_CPUS=8
@@ -85,7 +105,7 @@
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
@@ -96,6 +116,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -104,7 +126,6 @@
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
-CONFIG_TCIC=m
CONFIG_PCCARD_NONSTATIC=m
#
@@ -127,6 +148,203 @@
# CONFIG_BINFMT_MISC is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -139,6 +357,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -169,7 +392,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -189,6 +411,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -201,6 +424,7 @@
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -215,6 +439,7 @@
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -229,14 +454,12 @@
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -246,8 +469,6 @@
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
@@ -258,7 +479,9 @@
# CONFIG_SCSI_QLA22XX is not set
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
@@ -288,8 +511,11 @@
#
# Fusion MPT device support
#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
@@ -303,153 +529,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -457,12 +543,18 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
@@ -479,6 +571,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
@@ -489,48 +582,43 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
+# CONFIG_EEPRO100 is not set
CONFIG_E100=m
-CONFIG_E100_NAPI=y
# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
-CONFIG_EPIC100=m
+# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_DL2K=m
+# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
-CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
-# CONFIG_2BUFF_MODE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
#
# Token Ring devices
@@ -560,6 +648,7 @@
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
+# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
@@ -567,6 +656,7 @@
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
@@ -574,6 +664,7 @@
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
@@ -607,6 +698,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -633,13 +726,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -649,6 +735,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -667,7 +759,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -677,6 +768,7 @@
CONFIG_PDC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
@@ -708,6 +800,11 @@
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -718,10 +815,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -742,6 +849,7 @@
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
+# CONFIG_STI_CONSOLE is not set
#
# Sound
@@ -751,13 +859,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -772,17 +876,18 @@
#
# InfiniBand support
#
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
@@ -794,22 +899,20 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -836,13 +939,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -867,15 +968,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -890,6 +994,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -906,15 +1011,15 @@
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
+# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
-CONFIG_NLS_CODEPAGE_863=m
+# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
-CONFIG_NLS_CODEPAGE_865=m
+# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
@@ -926,10 +1031,10 @@
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
@@ -950,11 +1055,15 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
@@ -974,25 +1083,26 @@
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
@@ -1004,6 +1114,7 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 46c9511..8819e7e 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,12 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:35:54 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:10 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
@@ -14,33 +17,39 @@
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -60,8 +69,14 @@
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -78,11 +93,25 @@
CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
# CONFIG_PCI_LBA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# PA-RISC specific drivers
+#
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -91,6 +120,64 @@
# CONFIG_BINFMT_MISC is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -99,9 +186,15 @@
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -111,10 +204,8 @@
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
@@ -125,19 +216,17 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -149,6 +238,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=y
#
# ATA/ATAPI/MFM/RLL support
@@ -158,6 +248,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -170,6 +261,7 @@
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -183,16 +275,16 @@
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -202,14 +294,11 @@
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
@@ -219,7 +308,6 @@
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -231,7 +319,6 @@
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -240,12 +327,12 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
@@ -263,6 +350,7 @@
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
@@ -271,6 +359,9 @@
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -283,58 +374,8 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -347,6 +388,11 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -354,8 +400,8 @@
# CONFIG_LASI_82596 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
@@ -369,6 +415,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
@@ -384,12 +431,15 @@
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -413,12 +463,12 @@
#
# Wireless 802.11b ISA/PCI cards support
#
-# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
@@ -435,6 +485,8 @@
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -464,23 +516,12 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-# CONFIG_HP_SDC is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
+# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
@@ -488,7 +529,7 @@
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
@@ -502,6 +543,19 @@
# CONFIG_HP_SDC_RTC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+# CONFIG_HP_SDC is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -519,8 +573,11 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
#
# Non-8250 serial port support
@@ -529,6 +586,7 @@
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -555,11 +613,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -570,10 +631,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -587,6 +658,11 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -595,6 +671,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -606,18 +683,19 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -630,6 +708,7 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -639,13 +718,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -658,23 +733,36 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -697,11 +785,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -719,15 +806,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -785,13 +876,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -815,6 +912,7 @@
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -832,8 +930,13 @@
# CONFIG_CRYPTO_TEST is not set
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 67aca6c..9d86b6b 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,12 +1,16 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:26:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:31 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -15,26 +19,31 @@
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +53,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -66,10 +76,19 @@
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
-# CONFIG_PARISC64 is not set
# CONFIG_64BIT is not set
# CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -79,13 +98,10 @@
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-CONFIG_SUPERIO=y
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -93,21 +109,205 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
+# PA-RISC specific drivers
+#
+CONFIG_SUPERIO=y
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
+
+#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_DEBUG=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+CONFIG_IP6_NF_MATCH_OWNER=m
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -120,6 +320,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -141,14 +346,14 @@
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -158,6 +363,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -201,6 +407,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -218,6 +425,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -230,6 +438,7 @@
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -242,7 +451,9 @@
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -258,25 +469,26 @@
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=m
+# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -286,20 +498,17 @@
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA6322=m
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -316,19 +525,24 @@
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
-CONFIG_MD_MULTIPATH=y
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
#
# Fusion MPT device support
#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
@@ -342,151 +556,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_DEBUG=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -494,12 +570,18 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-CONFIG_HAPPYMEAL=m
+# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -514,28 +596,22 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
+# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
-CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
-CONFIG_B44=m
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-# CONFIG_EEPRO100_PIO is not set
+# CONFIG_EEPRO100 is not set
CONFIG_E100=m
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -554,15 +630,18 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-CONFIG_IXGB=y
-CONFIG_IXGB_NAPI=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
@@ -593,6 +672,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -622,16 +703,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -649,6 +720,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -666,7 +747,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -676,6 +756,7 @@
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -698,12 +779,16 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -714,10 +799,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -731,6 +826,11 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -739,6 +839,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -751,18 +852,20 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -775,6 +878,7 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -784,7 +888,78 @@
#
# Advanced Linux Sound Architecture
#
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
@@ -794,6 +969,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
@@ -804,23 +981,23 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
@@ -829,12 +1006,11 @@
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -846,21 +1022,25 @@
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-CONFIG_USB_KBTAB=m
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
@@ -879,6 +1059,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -894,7 +1075,6 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
@@ -903,10 +1083,12 @@
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -920,27 +1102,41 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -966,13 +1162,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -996,16 +1190,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1014,6 +1211,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1074,13 +1272,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -1092,21 +1296,22 @@
# Cryptographic options
#
CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
@@ -1117,9 +1322,14 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index fdae21c5..f38a462 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,38 +1,56 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:01:33 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -45,10 +63,21 @@
CONFIG_PA7000=y
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
+# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -65,14 +94,29 @@
# CONFIG_ISA is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PA-RISC specific drivers
+#
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -81,15 +125,97 @@
# CONFIG_BINFMT_MISC is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
#
# Generic Driver Options
#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -99,12 +225,10 @@
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
@@ -114,18 +238,31 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -135,6 +272,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -147,53 +285,59 @@
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -202,7 +346,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -217,15 +362,20 @@
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -238,80 +388,23 @@
# CONFIG_I2O is not set
#
-# Macintosh device drivers
+# Network device support
#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
@@ -321,6 +414,7 @@
CONFIG_LASI_82596=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
@@ -336,6 +430,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
@@ -361,30 +456,37 @@
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
-# CONFIG_ACENIC is not set
-CONFIG_DL2K=y
+CONFIG_ACENIC=y
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
@@ -399,38 +501,30 @@
#
# Wireless 802.11b ISA/PCI cards support
#
-CONFIG_AIRO=y
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
#
-# Token Ring devices
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -460,10 +554,56 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
+# Input Device Drivers
#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_HIL is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=y
+
+#
+# Hardware I/O ports
+#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
@@ -471,38 +611,8 @@
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_HIL=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_HIL is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDDLER is not set
-# CONFIG_JOYSTICK_DB9 is not set
-# CONFIG_JOYSTICK_GAMECON is not set
-# CONFIG_JOYSTICK_TURBOGRAFX is not set
-# CONFIG_INPUT_JOYDUMP is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -522,16 +632,16 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_MUX is not set
-# CONFIG_PDC_CONSOLE is not set
+CONFIG_SERIAL_MUX=y
+CONFIG_SERIAL_MUX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -541,12 +651,6 @@
# CONFIG_TIPAR is not set
#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
@@ -555,7 +659,6 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
@@ -565,21 +668,40 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -593,34 +715,45 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -629,6 +762,7 @@
# Logo configuration
#
# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -638,17 +772,94 @@
#
# Advanced Linux Sound Architecture
#
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# GSC devices
+#
+CONFIG_SND_HARMONY=y
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
-# CONFIG_SOUND_HARMONY is not set
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
@@ -658,26 +869,36 @@
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
# CONFIG_USB_STORAGE is not set
#
-# USB Human Interface Devices (HID)
+# USB Input Devices
#
# CONFIG_USB_HID is not set
@@ -688,16 +909,23 @@
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
@@ -709,13 +937,15 @@
#
#
-# USB Network adaptors
+# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -732,12 +962,21 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -745,22 +984,41 @@
# CONFIG_USB_GADGET is not set
#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -773,7 +1031,8 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
@@ -781,11 +1040,11 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -809,23 +1068,28 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -861,6 +1125,7 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -885,17 +1150,24 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_RWLOCK is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
@@ -909,6 +1181,8 @@
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -916,11 +1190,23 @@
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index f46a07a..a065349 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -27,6 +27,7 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
+#include <asm/sections.h>
int split_tlb;
int dcache_stride;
@@ -207,6 +208,9 @@
/* "New and Improved" version from Jim Hull
* (1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift))
+ * The following CAFL_STRIDE is an optimized version, see
+ * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html
+ * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html
*/
#define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift))
dcache_stride = CAFL_STRIDE(cache_info.dc_conf);
@@ -266,7 +270,6 @@
unsigned long offset;
unsigned long addr;
pgoff_t pgoff;
- pte_t *pte;
unsigned long pfn = page_to_pfn(page);
@@ -297,21 +300,16 @@
* taking a page fault if the pte doesn't exist.
* This is just for speed. If the page translation
* isn't there, there's no point exciting the
- * nadtlb handler into a nullification frenzy */
-
-
- if(!(pte = translation_exists(mpnt, addr)))
- continue;
-
- /* make sure we really have this page: the private
+ * nadtlb handler into a nullification frenzy.
+ *
+ * Make sure we really have this page: the private
* mappings may cover this area but have COW'd this
- * particular page */
- if(pte_pfn(*pte) != pfn)
- continue;
-
- __flush_cache_page(mpnt, addr);
-
- break;
+ * particular page.
+ */
+ if (translation_exists(mpnt, addr, pfn)) {
+ __flush_cache_page(mpnt, addr);
+ break;
+ }
}
flush_dcache_mmap_unlock(mapping);
}
@@ -339,17 +337,15 @@
void parisc_setup_cache_timing(void)
{
unsigned long rangetime, alltime;
- extern char _text; /* start of kernel code, defined by linker */
- extern char _end; /* end of BSS, defined by linker */
unsigned long size;
alltime = mfctl(16);
flush_data_cache();
alltime = mfctl(16) - alltime;
- size = (unsigned long)(&_end - _text);
+ size = (unsigned long)(_end - _text);
rangetime = mfctl(16);
- flush_kernel_dcache_range((unsigned long)&_text, size);
+ flush_kernel_dcache_range((unsigned long)_text, size);
rangetime = mfctl(16) - rangetime;
printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n",
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index d34bbe7..988844a 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -46,36 +46,51 @@
.bus_id = "parisc",
};
-#define for_each_padev(padev) \
- for (padev = next_dev(&root); padev != NULL; \
- padev = next_dev(&padev->dev))
+static inline int check_dev(struct device *dev)
+{
+ if (dev->bus == &parisc_bus_type) {
+ struct parisc_device *pdev;
+ pdev = to_parisc_device(dev);
+ return pdev->id.hw_type != HPHW_FAULTY;
+ }
+ return 1;
+}
-#define check_dev(padev) \
- (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev)
+static struct device *
+parse_tree_node(struct device *parent, int index, struct hardware_path *modpath);
+
+struct recurse_struct {
+ void * obj;
+ int (*fn)(struct device *, void *);
+};
+
+static int descend_children(struct device * dev, void * data)
+{
+ struct recurse_struct * recurse_data = (struct recurse_struct *)data;
+
+ if (recurse_data->fn(dev, recurse_data->obj))
+ return 1;
+ else
+ return device_for_each_child(dev, recurse_data, descend_children);
+}
/**
- * next_dev - enumerates registered devices
- * @dev: the previous device returned from next_dev
+ * for_each_padev - Iterate over all devices in the tree
+ * @fn: Function to call for each device.
+ * @data: Data to pass to the called function.
*
- * next_dev does a depth-first search of the tree, returning parents
- * before children. Returns NULL when there are no more devices.
+ * This performs a depth-first traversal of the tree, calling the
+ * function passed for each node. It calls the function for parents
+ * before children.
*/
-static struct parisc_device *next_dev(struct device *dev)
+
+static int for_each_padev(int (*fn)(struct device *, void *), void * data)
{
- if (!list_empty(&dev->children)) {
- dev = list_to_dev(dev->children.next);
- return check_dev(to_parisc_device(dev));
- }
-
- while (dev != &root) {
- if (dev->node.next != &dev->parent->children) {
- dev = list_to_dev(dev->node.next);
- return to_parisc_device(dev);
- }
- dev = dev->parent;
- }
-
- return NULL;
+ struct recurse_struct recurse_data = {
+ .obj = data,
+ .fn = fn,
+ };
+ return device_for_each_child(&root, &recurse_data, descend_children);
}
/**
@@ -105,12 +120,6 @@
return 0;
}
-static void claim_device(struct parisc_driver *driver, struct parisc_device *dev)
-{
- dev->driver = driver;
- request_mem_region(dev->hpa, 0x1000, driver->name);
-}
-
static int parisc_driver_probe(struct device *dev)
{
int rc;
@@ -119,8 +128,8 @@
rc = pa_drv->probe(pa_dev);
- if(!rc)
- claim_device(pa_drv, pa_dev);
+ if (!rc)
+ pa_dev->driver = pa_drv;
return rc;
}
@@ -131,7 +140,6 @@
struct parisc_driver *pa_drv = to_parisc_driver(dev->driver);
if (pa_drv->remove)
pa_drv->remove(pa_dev);
- release_mem_region(pa_dev->hpa, 0x1000);
return 0;
}
@@ -173,6 +181,24 @@
}
EXPORT_SYMBOL(register_parisc_driver);
+
+struct match_count {
+ struct parisc_driver * driver;
+ int count;
+};
+
+static int match_and_count(struct device * dev, void * data)
+{
+ struct match_count * m = data;
+ struct parisc_device * pdev = to_parisc_device(dev);
+
+ if (check_dev(dev)) {
+ if (match_device(m->driver, pdev))
+ m->count++;
+ }
+ return 0;
+}
+
/**
* count_parisc_driver - count # of devices this driver would match
* @driver: the PA-RISC driver to try
@@ -182,15 +208,14 @@
*/
int count_parisc_driver(struct parisc_driver *driver)
{
- struct parisc_device *device;
- int cnt = 0;
+ struct match_count m = {
+ .driver = driver,
+ .count = 0,
+ };
- for_each_padev(device) {
- if (match_device(driver, device))
- cnt++;
- }
+ for_each_padev(match_and_count, &m);
- return cnt;
+ return m.count;
}
@@ -206,14 +231,34 @@
}
EXPORT_SYMBOL(unregister_parisc_driver);
+struct find_data {
+ unsigned long hpa;
+ struct parisc_device * dev;
+};
+
+static int find_device(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+ struct find_data * d = (struct find_data*)data;
+
+ if (check_dev(dev)) {
+ if (pdev->hpa.start == d->hpa) {
+ d->dev = pdev;
+ return 1;
+ }
+ }
+ return 0;
+}
+
static struct parisc_device *find_device_by_addr(unsigned long hpa)
{
- struct parisc_device *dev;
- for_each_padev(dev) {
- if (dev->hpa == hpa)
- return dev;
- }
- return NULL;
+ struct find_data d = {
+ .hpa = hpa,
+ };
+ int ret;
+
+ ret = for_each_padev(find_device, &d);
+ return ret ? d.dev : NULL;
}
/**
@@ -387,6 +432,23 @@
return dev;
}
+struct match_id_data {
+ char id;
+ struct parisc_device * dev;
+};
+
+static int match_by_id(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+ struct match_id_data * d = data;
+
+ if (pdev->hw_path == d->id) {
+ d->dev = pdev;
+ return 1;
+ }
+ return 0;
+}
+
/**
* alloc_tree_node - returns a device entry in the iotree
* @parent: the parent node in the tree
@@ -397,15 +459,13 @@
*/
static struct parisc_device * alloc_tree_node(struct device *parent, char id)
{
- struct device *dev;
-
- list_for_each_entry(dev, &parent->children, node) {
- struct parisc_device *padev = to_parisc_device(dev);
- if (padev->hw_path == id)
- return padev;
- }
-
- return create_tree_node(id, parent);
+ struct match_id_data d = {
+ .id = id,
+ };
+ if (device_for_each_child(parent, &d, match_by_id))
+ return d.dev;
+ else
+ return create_tree_node(id, parent);
}
static struct parisc_device *create_parisc_device(struct hardware_path *modpath)
@@ -439,10 +499,8 @@
dev = create_parisc_device(mod_path);
if (dev->id.hw_type != HPHW_FAULTY) {
- char p[64];
- print_pa_hwpath(dev, p);
printk("Two devices have hardware path %s. Please file a bug with HP.\n"
- "In the meantime, you could try rearranging your cards.\n", p);
+ "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev));
return NULL;
}
@@ -451,12 +509,27 @@
dev->id.hversion_rev = iodc_data[1] & 0x0f;
dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) |
(iodc_data[5] << 8) | iodc_data[6];
- dev->hpa = hpa;
+ dev->hpa.name = parisc_pathname(dev);
+ dev->hpa.start = hpa;
+ if (hpa == 0xf4000000 || hpa == 0xf6000000 ||
+ hpa == 0xf8000000 || hpa == 0xfa000000) {
+ dev->hpa.end = hpa + 0x01ffffff;
+ } else {
+ dev->hpa.end = hpa + 0xfff;
+ }
+ dev->hpa.flags = IORESOURCE_MEM;
name = parisc_hardware_description(&dev->id);
if (name) {
strlcpy(dev->name, name, sizeof(dev->name));
}
+ /* Silently fail things like mouse ports which are subsumed within
+ * the keyboard controller
+ */
+ if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa))
+ printk("Unable to claim HPA %lx for device %s\n",
+ hpa, name);
+
return dev;
}
@@ -555,6 +628,33 @@
return (curr->hw_path == id);
}
+struct parse_tree_data {
+ int index;
+ struct hardware_path * modpath;
+ struct device * dev;
+};
+
+static int check_parent(struct device * dev, void * data)
+{
+ struct parse_tree_data * d = data;
+
+ if (check_dev(dev)) {
+ if (dev->bus == &parisc_bus_type) {
+ if (match_parisc_device(dev, d->index, d->modpath))
+ d->dev = dev;
+ } else if (is_pci_dev(dev)) {
+ if (match_pci_device(dev, d->index, d->modpath))
+ d->dev = dev;
+ } else if (dev->bus == NULL) {
+ /* we are on a bus bridge */
+ struct device *new = parse_tree_node(dev, d->index, d->modpath);
+ if (new)
+ d->dev = new;
+ }
+ }
+ return d->dev != NULL;
+}
+
/**
* parse_tree_node - returns a device entry in the iotree
* @parent: the parent node in the tree
@@ -568,24 +668,18 @@
static struct device *
parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
{
- struct device *device;
-
- list_for_each_entry(device, &parent->children, node) {
- if (device->bus == &parisc_bus_type) {
- if (match_parisc_device(device, index, modpath))
- return device;
- } else if (is_pci_dev(device)) {
- if (match_pci_device(device, index, modpath))
- return device;
- } else if (device->bus == NULL) {
- /* we are on a bus bridge */
- struct device *new = parse_tree_node(device, index, modpath);
- if (new)
- return new;
- }
- }
+ struct parse_tree_data d = {
+ .index = index,
+ .modpath = modpath,
+ };
- return NULL;
+ struct recurse_struct recurse_data = {
+ .obj = &d,
+ .fn = check_parent,
+ };
+
+ device_for_each_child(parent, &recurse_data, descend_children);
+ return d.dev;
}
/**
@@ -636,7 +730,7 @@
((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT))
#define IS_LOWER_PORT(dev) \
- ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \
+ ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \
& BC_PORT_MASK) == BC_LOWER_PORT)
#define MAX_NATIVE_DEVICES 64
@@ -645,8 +739,8 @@
#define FLEX_MASK F_EXTEND(0xfffc0000)
#define IO_IO_LOW offsetof(struct bc_module, io_io_low)
#define IO_IO_HIGH offsetof(struct bc_module, io_io_high)
-#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW)
-#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH)
+#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW)
+#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH)
static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high,
struct device *parent);
@@ -655,10 +749,10 @@
{
unsigned long io_io_low, io_io_high;
- if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
+ if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
return;
- if(dev->id.hw_type == HPHW_IOA) {
+ if (dev->id.hw_type == HPHW_IOA) {
io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16);
io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET;
} else {
@@ -731,7 +825,7 @@
print_pa_hwpath(dev, hw_path);
printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
- ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type,
+ ++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type,
dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
if (dev->num_addrs) {
@@ -753,13 +847,20 @@
get_device(&root);
}
+
+static int print_one_device(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+
+ if (check_dev(dev))
+ print_parisc_device(pdev);
+ return 0;
+}
+
/**
* print_parisc_devices - Print out a list of devices found in this system
*/
void print_parisc_devices(void)
{
- struct parisc_device *dev;
- for_each_padev(dev) {
- print_parisc_device(dev);
- }
+ for_each_padev(print_one_device, NULL);
}
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index be0f07f..c7e66ee 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -30,14 +30,14 @@
* - save registers to kernel stack and handle in assembly or C */
+#include <asm/psw.h>
#include <asm/assembly.h> /* for LDREG/STREG defines */
#include <asm/pgtable.h>
-#include <asm/psw.h>
#include <asm/signal.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define CMPIB cmpib,*
#define CMPB cmpb,*
#define COND(x) *x
@@ -67,19 +67,22 @@
/* Switch to virtual mapping, trashing only %r1 */
.macro virt_map
- rsm PSW_SM_Q,%r0
- tovirt_r1 %r29
- mfsp %sr7, %r1
- or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
- mtsp %r1, %sr3
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */
mtsp %r0, %sr4
mtsp %r0, %sr5
+ mfsp %sr7, %r1
+ or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
+ mtsp %r1, %sr3
+ tovirt_r1 %r29
+ load32 KERNEL_PSW, %r1
+
+ rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */
mtsp %r0, %sr6
mtsp %r0, %sr7
- load32 KERNEL_PSW, %r1
- mtctl %r1, %cr22
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
+ mtctl %r1, %ipsw
load32 4f, %r1
mtctl %r1, %cr18 /* Set IIAOQ tail */
ldo 4(%r1), %r1
@@ -214,7 +217,7 @@
va = r8 /* virtual address for which the trap occured */
spc = r24 /* space for which the trap occured */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* itlb miss interruption handler (parisc 1.1 - 32 bit)
@@ -236,7 +239,7 @@
.macro itlb_20 code
mfctl %pcsq, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b itlb_miss_20w
#else
b itlb_miss_20
@@ -246,7 +249,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* naitlb miss interruption handler (parisc 1.1 - 32 bit)
*
@@ -283,7 +286,7 @@
.macro naitlb_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b itlb_miss_20w
#else
b itlb_miss_20
@@ -296,7 +299,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* dtlb miss interruption handler (parisc 1.1 - 32 bit)
*/
@@ -318,7 +321,7 @@
.macro dtlb_20 code
mfctl %isr, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b dtlb_miss_20w
#else
b dtlb_miss_20
@@ -328,7 +331,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */
.macro nadtlb_11 code
@@ -346,7 +349,7 @@
.macro nadtlb_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b nadtlb_miss_20w
#else
b nadtlb_miss_20
@@ -356,7 +359,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* dirty bit trap interruption handler (parisc 1.1 - 32 bit)
*/
@@ -378,7 +381,7 @@
.macro dbit_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b dbit_trap_20w
#else
b dbit_trap_20
@@ -391,7 +394,7 @@
/* The following are simple 32 vs 64 bit instruction
* abstractions for the macros */
.macro EXTR reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u \reg1,32+\start,\length,\reg2
#else
extrw,u \reg1,\start,\length,\reg2
@@ -399,7 +402,7 @@
.endm
.macro DEP reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depd \reg1,32+\start,\length,\reg2
#else
depw \reg1,\start,\length,\reg2
@@ -407,7 +410,7 @@
.endm
.macro DEPI val,start,length,reg
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi \val,32+\start,\length,\reg
#else
depwi \val,\start,\length,\reg
@@ -418,7 +421,7 @@
* fault. We have to extract this and place it in the va,
* zeroing the corresponding bits in the space register */
.macro space_adjust spc,va,tmp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u \spc,63,SPACEID_SHIFT,\tmp
depd %r0,63,SPACEID_SHIFT,\spc
depd \tmp,31,SPACEID_SHIFT,\va
@@ -476,7 +479,7 @@
bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault
DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
copy \pmd,%r9
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r9,PxD_VALUE_SHIFT,\pmd
#else
shlw %r9,PxD_VALUE_SHIFT,\pmd
@@ -607,7 +610,7 @@
.macro do_alias spc,tmp,tmp1,va,pte,prot,fault
cmpib,COND(<>),n 0,\spc,\fault
ldil L%(TMPALIAS_MAP_START),\tmp
-#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000)
+#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000)
/* on LP64, ldi will sign extend into the upper 32 bits,
* which is behaviour we don't want */
depdi 0,31,32,\tmp
@@ -621,7 +624,7 @@
* OK, it is in the temp alias region, check whether "from" or "to".
* Check "subtle" note in pacache.S re: r23/r26.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u,*= \va,41,1,%r0
#else
extrw,u,= \va,9,1,%r0
@@ -688,7 +691,7 @@
def 30
def 31
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.export fault_vector_11
@@ -761,7 +764,7 @@
copy %r30, %r1
ldo PT_SZ_ALGN(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Yo, function pointers in wide mode are little structs... -PB */
ldd 24(%r26), %r2
STREG %r2, PT_GR27(%r1) /* Store childs %dp */
@@ -777,7 +780,7 @@
or %r26, %r24, %r26 /* will have kernel mappings. */
ldi 1, %r25 /* stack_start, signals kernel thread */
stw %r0, -52(%r30) /* user_tid */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL do_fork, %r2
@@ -806,7 +809,7 @@
LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1
LDREG TASK_PT_GR25(%r1), %r26
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG TASK_PT_GR27(%r1), %r27
LDREG TASK_PT_GR22(%r1), %r22
#endif
@@ -814,11 +817,16 @@
ble 0(%sr7, %r1)
copy %r31, %r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
loadgp /* Thread could have been in a module */
#endif
+#ifndef CONFIG_64BIT
b sys_exit
+#else
+ load32 sys_exit, %r1
+ bv %r0(%r1)
+#endif
ldi 0, %r26
.import sys_execve, code
@@ -830,7 +838,7 @@
STREG %r26, PT_GR26(%r16)
STREG %r25, PT_GR25(%r16)
STREG %r24, PT_GR24(%r16)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL sys_execve, %r2
@@ -855,6 +863,7 @@
_switch_to:
STREG %r2, -RP_OFFSET(%r30)
+ callee_save_float
callee_save
load32 _switch_to_ret, %r2
@@ -871,6 +880,7 @@
_switch_to_ret:
mtctl %r0, %cr0 /* Needed for single stepping */
callee_rest
+ callee_rest_float
LDREG -RP_OFFSET(%r30), %r2
bv %r0(%r2)
@@ -888,9 +898,6 @@
* this way, then we will need to copy %sr3 in to PT_SR[3..7], and
* adjust IASQ[0..1].
*
- * Note that the following code uses a "relied upon translation".
- * See the parisc ACD for details. The ssm is necessary due to a
- * PCXT bug.
*/
.align 4096
@@ -911,7 +918,7 @@
STREG %r19,PT_IAOQ1(%r16)
LDREG PT_PSW(%r16),%r19
load32 USER_PSW_MASK,%r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
load32 USER_PSW_HI_MASK,%r20
depd %r20,31,32,%r1
#endif
@@ -955,7 +962,7 @@
/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount
** irq_stat[] is defined using ____cacheline_aligned.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r1, 6, %r20
#else
shlw %r1, 5, %r20
@@ -963,9 +970,6 @@
add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */
#endif /* CONFIG_SMP */
- LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */
- cmpib,<>,n 0,%r20,intr_do_softirq /* forward */
-
intr_check_resched:
/* check for reschedule */
@@ -985,24 +989,19 @@
rest_fp %r1
rest_general %r29
- /* Create a "relied upon translation" PA 2.0 Arch. F-5 */
- ssm 0,%r0
- nop
- nop
- nop
- nop
- nop
- nop
- nop
+ /* inverse of virt_map */
+ pcxt_ssm_bug
+ rsm PSW_SM_QUIET,%r0 /* prepare for rfi */
tophys_r1 %r29
- rsm (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0
/* Restore space id's and special cr's from PT_REGS
- * structure pointed to by r29 */
+ * structure pointed to by r29
+ */
rest_specials %r29
- /* Important: Note that rest_stack restores r29
- * last (we are using it)! It also restores r1 and r30. */
+ /* IMPORTANT: rest_stack restores r29 last (we are using it)!
+ * It also restores r1 and r30.
+ */
rest_stack
rfi
@@ -1015,17 +1014,6 @@
nop
nop
- .import do_softirq,code
-intr_do_softirq:
- bl do_softirq,%r2
-#ifdef __LP64__
- ldo -16(%r30),%r29 /* Reference param save area */
-#else
- nop
-#endif
- b intr_check_resched
- nop
-
.import schedule,code
intr_do_resched:
/* Only do reschedule if we are returning to user space */
@@ -1036,12 +1024,17 @@
CMPIB= 0,%r20,intr_restore /* backward */
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
ldil L%intr_check_sig, %r2
+#ifndef CONFIG_64BIT
b schedule
+#else
+ load32 schedule, %r20
+ bv %r0(%r20)
+#endif
ldo R%intr_check_sig(%r2), %r2
@@ -1064,7 +1057,7 @@
copy %r0, %r24 /* unsigned long in_syscall */
copy %r16, %r25 /* struct pt_regs *regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1088,7 +1081,7 @@
mfctl %cr31,%r1
copy %r30,%r17
/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi 0,63,15,%r17
#else
depi 0,31,15,%r17
@@ -1115,7 +1108,7 @@
ldil L%intr_return, %r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1153,15 +1146,17 @@
CMPIB=,n 6,%r26,skip_save_ior
- /* save_specials left ipsw value in r8 for us to test */
mfctl %cr20, %r16 /* isr */
+ nop /* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */
mfctl %cr21, %r17 /* ior */
-#ifdef __LP64__
+
+#ifdef CONFIG_64BIT
/*
* If the interrupted code was running with W bit off (32 bit),
* clear the b bits (bits 0 & 1) in the ior.
+ * save_specials left ipsw value in r8 for us to test.
*/
extrd,u,*<> %r8,PSW_W_BIT,1,%r0
depdi 0,1,2,%r17
@@ -1192,7 +1187,7 @@
loadgp
copy %r29, %r25 /* arg1 is pt_regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1230,7 +1225,7 @@
spc = r24 /* space for which the trap occured */
ptp = r25 /* page directory/page table pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
dtlb_miss_20w:
space_adjust spc,va,t0
@@ -1487,10 +1482,10 @@
add,l %r1,%r24,%r1 /* doesn't affect c/b bits */
nadtlb_nullify:
- mfctl %cr22,%r8 /* Get ipsw */
+ mfctl %ipsw,%r8
ldil L%PSW_N,%r9
or %r8,%r9,%r8 /* Set PSW_N */
- mtctl %r8,%cr22
+ mtctl %r8,%ipsw
rfir
nop
@@ -1521,7 +1516,7 @@
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
itlb_miss_20w:
/*
@@ -1588,7 +1583,7 @@
#endif
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
dbit_trap_20w:
space_adjust spc,va,t0
@@ -1797,7 +1792,7 @@
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1847,7 +1842,7 @@
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1869,7 +1864,7 @@
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1897,10 +1892,10 @@
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl \execve,%r2
+ BL \execve,%r2
copy %r1,%arg0
ldo -FRAME_SIZE(%r30),%r30
@@ -1923,7 +1918,7 @@
sys_execve_wrapper:
execve_wrapper sys_execve
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.export sys32_execve_wrapper
.import sys32_execve
@@ -1937,7 +1932,7 @@
ldo TASK_REGS(%r26),%r26 /* get pt regs */
/* Don't save regs, we are going to restore them from sigcontext. */
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
BL sys_rt_sigreturn,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -1968,7 +1963,7 @@
ldo TASK_REGS(%r1),%r24 /* get pt regs */
LDREG TASK_PT_GR30(%r24),%r24
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
b,l do_sigaltstack,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -1982,7 +1977,7 @@
bv %r0(%r2)
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.export sys32_sigaltstack_wrapper
sys32_sigaltstack_wrapper:
/* Get the user stack pointer */
@@ -2006,7 +2001,7 @@
reg_save %r24
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
b,l sys_rt_sigsuspend,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -2079,7 +2074,7 @@
ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */
/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r26, 6, %r20
#else
shlw %r26, 5, %r20
@@ -2087,9 +2082,6 @@
add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */
#endif /* CONFIG_SMP */
- LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */
- cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */
-
syscall_check_resched:
/* check for reschedule */
@@ -2144,7 +2136,7 @@
depi 3,31,2,%r31 /* ensure return to user mode. */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* decide whether to reset the wide mode bit
*
* For a syscall, the W bit is stored in the lowest bit
@@ -2227,20 +2219,10 @@
b intr_restore
nop
- .import do_softirq,code
-syscall_do_softirq:
- bl do_softirq,%r2
- nop
- /* NOTE: We enable I-bit incase we schedule later,
- * and we might be going back to userspace if we were
- * traced. */
- b syscall_check_resched
- ssm PSW_SM_I, %r0 /* do_softirq returns with I bit off */
-
.import schedule,code
syscall_do_resched:
BL schedule,%r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#else
nop
@@ -2260,7 +2242,7 @@
ldi 1, %r24 /* unsigned long in_syscall */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL do_signal,%r2
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index f244fb2..553f8fe 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -83,15 +83,15 @@
int parisc_narrow_firmware = 1;
#endif
-/* on all currently-supported platforms, IODC I/O calls are always
- * 32-bit calls, and MEM_PDC calls are always the same width as the OS.
- * This means Cxxx boxes can't run wide kernels right now. -PB
+/* On most currently-supported platforms, IODC I/O calls are 32-bit calls
+ * and MEM_PDC calls are always the same width as the OS.
+ * Some PAT boxes may have 64-bit IODC I/O.
*
- * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on
- * systems with 32-bit MEM_PDC calls. This will allow wide kernels to
- * run on Cxxx boxes now. -RB
- *
- * Note that some PAT boxes may have 64-bit IODC I/O...
+ * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow
+ * 64-bit kernels to run on systems with 32-bit MEM_PDC calls.
+ * This allowed wide kernels to run on Cxxx boxes.
+ * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode
+ * when running a 64-bit kernel on such boxes (e.g. C200 or C360).
*/
#ifdef __LP64__
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 28405ed..0b47afc 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -12,7 +12,7 @@
* Initial Version 04-23-1999 by Helge Deller <deller@gmx.de>
*/
-#include <linux/autoconf.h> /* for CONFIG_SMP */
+#include <linux/config.h> /* for CONFIG_SMP */
#include <asm/asm-offsets.h>
#include <asm/psw.h>
@@ -36,10 +36,10 @@
.align 4
.import init_thread_union,data
.import fault_vector_20,code /* IVA parisc 2.0 32 bit */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.import fault_vector_11,code /* IVA parisc 1.1 32 bit */
.import $global$ /* forward declaration */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
.export stext
.export _stext,data /* Kernel want it this way! */
_stext:
@@ -76,7 +76,7 @@
mtctl %r4,%cr24 /* Initialize kernel root pointer */
mtctl %r4,%cr25 /* Initialize user root pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Set pmd in pgd */
load32 PA(pmd0),%r5
shrd %r5,PxD_VALUE_SHIFT,%r3
@@ -99,7 +99,7 @@
stw %r3,0(%r4)
ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
addib,> -1,%r1,1b
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo ASM_PMD_ENTRY_SIZE(%r4),%r4
#else
ldo ASM_PGD_ENTRY_SIZE(%r4),%r4
@@ -170,7 +170,7 @@
stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */
#endif /*CONFIG_SMP*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
tophys_r1 %sp
/* Save the rfi target address */
@@ -224,8 +224,6 @@
mtctl %r0,%cr12
mtctl %r0,%cr13
- /* Prepare to RFI! Man all the cannons! */
-
/* Initialize the global data pointer */
loadgp
@@ -235,7 +233,7 @@
* following short sequence of instructions can determine this
* (without being illegal on a PA1.1 machine).
*/
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
ldi 32,%r10
mtctl %r10,%cr11
.level 2.0
@@ -248,52 +246,22 @@
$is_pa20:
.level LEVEL /* restore 1.1 || 2.0w */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
load32 PA(fault_vector_20),%r10
$install_iva:
mtctl %r10,%cr14
-#ifdef __LP64__
- b aligned_rfi
+ b aligned_rfi /* Prepare to RFI! Man all the cannons! */
nop
- .align 256
+ .align 128
aligned_rfi:
- ssm 0,0
- nop /* 1 */
- nop /* 2 */
- nop /* 3 */
- nop /* 4 */
- nop /* 5 */
- nop /* 6 */
- nop /* 7 */
- nop /* 8 */
-#endif
+ pcxt_ssm_bug
-#ifdef __LP64__ /* move to psw.h? */
-#define PSW_BITS PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R
-#else
-#define PSW_BITS PSW_SM_Q
-#endif
+ rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */
+ /* Don't need NOPs, have 8 compliant insn before rfi */
-$rfi:
- /* turn off troublesome PSW bits */
- rsm PSW_BITS,%r0
-
- /* kernel PSW:
- * - no interruptions except HPMC and TOC (which are handled by PDC)
- * - Q bit set (IODC / PDC interruptions)
- * - big-endian
- * - virtually mapped
- */
- load32 KERNEL_PSW,%r10
- mtctl %r10,%ipsw
-
- /* Set the space pointers for the post-RFI world
- ** Clear the two-level IIA Space Queue, effectively setting
- ** Kernel space.
- */
mtctl %r0,%cr17 /* Clear IIASQ tail */
mtctl %r0,%cr17 /* Clear IIASQ head */
@@ -301,8 +269,11 @@
mtctl %r11,%cr18 /* IIAOQ head */
ldo 4(%r11),%r11
mtctl %r11,%cr18 /* IIAOQ tail */
+
+ load32 KERNEL_PSW,%r10
+ mtctl %r10,%ipsw
- /* Jump to hyperspace */
+ /* Jump through hyperspace to Virt Mode */
rfi
nop
@@ -313,7 +284,7 @@
.import smp_init_current_idle_task,data
.import smp_callin,code
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
smp_callin_rtn:
.proc
.callinfo
@@ -321,7 +292,7 @@
nop
nop
.procend
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
/***************************************************************************
* smp_slave_stext is executed by all non-monarch Processors when the Monarch
@@ -356,7 +327,7 @@
mtctl %r4,%cr24 /* Initialize kernel root pointer */
mtctl %r4,%cr25 /* Initialize user root pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Setup PDCE_PROC entry */
copy %arg0,%r3
#else
@@ -373,7 +344,7 @@
.procend
#endif /* CONFIG_SMP */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.data
.align 4
@@ -383,4 +354,4 @@
.size $global$,4
$global$:
.word 0
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c
index 1d3824b..0a33110 100644
--- a/arch/parisc/kernel/ioctl32.c
+++ b/arch/parisc/kernel/ioctl32.c
@@ -104,12 +104,9 @@
}
out:
- if (kversion.name)
- kfree(kversion.name);
- if (kversion.date)
- kfree(kversion.date);
- if (kversion.desc)
- kfree(kversion.desc);
+ kfree(kversion.name);
+ kfree(kversion.date);
+ kfree(kversion.desc);
return ret;
}
@@ -166,9 +163,7 @@
ret = -EFAULT;
}
- if (karg.unique != NULL)
- kfree(karg.unique);
-
+ kfree(karg.unique);
return ret;
}
@@ -265,7 +260,6 @@
}
kfree(karg.list);
-
return ret;
}
@@ -305,7 +299,6 @@
out:
kfree(karg.list);
-
return ret;
}
@@ -494,15 +487,10 @@
}
out:
- if (karg.send_indices)
- kfree(karg.send_indices);
- if (karg.send_sizes)
- kfree(karg.send_sizes);
- if (karg.request_indices)
- kfree(karg.request_indices);
- if (karg.request_sizes)
- kfree(karg.request_sizes);
-
+ kfree(karg.send_indices);
+ kfree(karg.send_sizes);
+ kfree(karg.request_indices);
+ kfree(karg.request_sizes);
return ret;
}
@@ -555,9 +543,7 @@
ret = -EFAULT;
}
- if (karg.contexts)
- kfree(karg.contexts);
-
+ kfree(karg.contexts);
return ret;
}
@@ -575,11 +561,6 @@
#define DECLARES
#include "compat_ioctl.c"
-/* Might be moved to compat_ioctl.h with some ifdefs... */
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
-
/* PA-specific ioctls */
COMPATIBLE_IOCTL(PA_PERF_ON)
COMPATIBLE_IOCTL(PA_PERF_OFF)
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 77e03bc..9534ee1 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -26,7 +26,7 @@
* can be used.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define ADDIB addib,*
#define CMPB cmpb,*
#define ANDCM andcm,*
@@ -40,8 +40,10 @@
.level 2.0
#endif
-#include <asm/assembly.h>
+#include <linux/config.h>
+
#include <asm/psw.h>
+#include <asm/assembly.h>
#include <asm/pgtable.h>
#include <asm/cache.h>
@@ -62,32 +64,23 @@
* to happen in real mode with all interruptions disabled.
*/
- /*
- * Once again, we do the rfi dance ... some day we need examine
- * all of our uses of this type of code and see what can be
- * consolidated.
- */
+ /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */
+ rsm PSW_SM_I, %r19 /* save I-bit state */
+ load32 PA(1f), %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- rsm PSW_SM_I, %r19 /* relied upon translation! PA 2.0 Arch. F-5 */
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- rsm PSW_SM_Q, %r0 /* Turn off Q bit to load iia queue */
- ldil L%REAL_MODE_PSW, %r1
- ldo R%REAL_MODE_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%PA(1f), %r1
- ldo R%PA(1f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 REAL_MODE_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
@@ -178,29 +171,36 @@
ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */
add %r21, %r20, %r20 /* increment space */
+
fdtdone:
+ /*
+ * Switch back to virtual mode
+ */
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0
+ load32 2f, %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- /* Switch back to virtual mode */
-
- rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */
- ldil L%KERNEL_PSW, %r1
- ldo R%KERNEL_PSW(%r1), %r1
- or %r1, %r19, %r1 /* Set I bit if set on entry */
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%(2f), %r1
- ldo R%(2f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 KERNEL_PSW, %r1
+ or %r1, %r19, %r1 /* I-bit to state on entry */
+ mtctl %r1, %ipsw /* restore I-bit (entire PSW) */
rfi
nop
2: bv %r0(%r2)
nop
- .exit
+ .exit
.procend
.export flush_instruction_cache_local,code
@@ -227,7 +227,7 @@
fimanyloop: /* Loop if LOOP >= 2 */
ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */
- fice 0(%sr1, %arg0)
+ fice %r0(%sr1, %arg0)
fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */
movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */
ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */
@@ -238,7 +238,7 @@
fisync:
sync
- mtsm %r22
+ mtsm %r22 /* restore I-bit */
bv %r0(%r2)
nop
.exit
@@ -269,7 +269,7 @@
fdmanyloop: /* Loop if LOOP >= 2 */
ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */
- fdce 0(%sr1, %arg0)
+ fdce %r0(%sr1, %arg0)
fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */
movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */
ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */
@@ -281,7 +281,7 @@
fdsync:
syncdma
sync
- mtsm %r22
+ mtsm %r22 /* restore I-bit */
bv %r0(%r2)
nop
.exit
@@ -296,7 +296,7 @@
.callinfo NO_CALLS
.entry
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* PA8x00 CPUs can consume 2 loads or 1 store per cycle.
* Unroll the loop by hand and arrange insn appropriately.
* GCC probably can do this just as well.
@@ -351,7 +351,11 @@
std %r22, 120(%r26)
ldo 128(%r26), %r26
- ADDIB> -1, %r1, 1b /* bundle 10 */
+ /* conditional branches nullify on forward taken branch, and on
+ * non-taken backward branch. Note that .+4 is a backwards branch.
+ * The ldd should only get executed if the branch is taken.
+ */
+ ADDIB>,n -1, %r1, 1b /* bundle 10 */
ldd 0(%r25), %r19 /* start next loads */
#else
@@ -363,10 +367,10 @@
* the full 64 bit register values on interrupt, we can't
* use ldd/std on a 32 bit kernel.
*/
+ ldw 0(%r25), %r19
ldi 64, %r1 /* PAGE_SIZE/64 == 64 */
1:
- ldw 0(%r25), %r19
ldw 4(%r25), %r20
ldw 8(%r25), %r21
ldw 12(%r25), %r22
@@ -396,11 +400,12 @@
ldw 60(%r25), %r22
stw %r19, 48(%r26)
stw %r20, 52(%r26)
+ ldo 64(%r25), %r25
stw %r21, 56(%r26)
stw %r22, 60(%r26)
ldo 64(%r26), %r26
- ADDIB> -1, %r1, 1b
- ldo 64(%r25), %r25
+ ADDIB>,n -1, %r1, 1b
+ ldw 0(%r25), %r19
#endif
bv %r0(%r2)
nop
@@ -456,7 +461,7 @@
sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */
extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */
depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */
@@ -543,7 +548,7 @@
tophys_r1 %r26
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#if (TMPALIAS_MAP_START >= 0x80000000)
depdi 0, 31,32, %r28 /* clear any sign extension */
#endif
@@ -560,7 +565,7 @@
pdtlb 0(%r28)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldi 32, %r1 /* PAGE_SIZE/128 == 32 */
/* PREFETCH (Write) has not (yet) been proven to help here */
@@ -585,7 +590,7 @@
ADDIB> -1, %r1, 1b
ldo 128(%r28), %r28
-#else /* ! __LP64 */
+#else /* ! CONFIG_64BIT */
ldi 64, %r1 /* PAGE_SIZE/64 == 64 */
@@ -608,7 +613,7 @@
stw %r0, 60(%r28)
ADDIB> -1, %r1, 1b
ldo 64(%r28), %r28
-#endif /* __LP64 */
+#endif /* CONFIG_64BIT */
bv %r0(%r2)
nop
@@ -626,7 +631,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -670,7 +675,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1,63-PAGE_SHIFT,1, %r25
#else
depwi,z 1,31-PAGE_SHIFT,1, %r25
@@ -714,7 +719,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -759,7 +764,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -807,7 +812,7 @@
tophys_r1 %r26
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */
depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */
depdi 0, 63,12, %r28 /* Clear any offset bits */
@@ -824,7 +829,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r29
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r29
@@ -935,7 +940,7 @@
ldil L%icache_stride, %r1
ldw R%icache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -944,23 +949,23 @@
sub %r25, %r23, %r25
-1: fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
+1: fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
CMPB<< %r26, %r25, 1b
- fic,m %r23(%r26)
+ fic,m %r23(%sr4, %r26)
sync
bv %r0(%r2)
@@ -982,17 +987,18 @@
ANDCM %r26, %r21, %r26
1: CMPB<<,n %r26, %r25, 1b
- fic,m %r23(%r26)
+ fic,m %r23(%sr4, %r26)
sync
bv %r0(%r2)
nop
.exit
-
.procend
- .align 128
-
+ /* align should cover use of rfi in disable_sr_hashing_asm and
+ * srdis_done.
+ */
+ .align 256
.export disable_sr_hashing_asm,code
disable_sr_hashing_asm:
@@ -1000,28 +1006,26 @@
.callinfo NO_CALLS
.entry
- /* Switch to real mode */
+ /*
+ * Switch to real mode
+ */
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0
+ load32 PA(1f), %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- ssm 0, %r0 /* relied upon translation! */
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- rsm (PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */
- ldil L%REAL_MODE_PSW, %r1
- ldo R%REAL_MODE_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%PA(1f), %r1
- ldo R%PA(1f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 REAL_MODE_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
@@ -1053,27 +1057,31 @@
srdis_pa20:
- /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */
+ /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */
.word 0x144008bc /* mfdiag %dr2, %r28 */
depdi 0, 54,1, %r28 /* clear DIAG_SPHASH_ENAB (bit 54) */
.word 0x145c1840 /* mtdiag %r28, %dr2 */
+
srdis_done:
-
/* Switch back to virtual mode */
+ rsm PSW_SM_I, %r0 /* prep to load iia queue */
+ load32 2f, %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */
- ldil L%KERNEL_PSW, %r1
- ldo R%KERNEL_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%(2f), %r1
- ldo R%(2f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 KERNEL_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 368cc09..f94a02e 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -31,7 +31,7 @@
#include <asm/page.h> /* get_order */
#include <asm/pgalloc.h>
#include <asm/uaccess.h>
-
+#include <asm/tlbflush.h> /* for purge_tlb_*() macros */
static struct proc_dir_entry * proc_gsc_root = NULL;
static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length);
@@ -114,7 +114,7 @@
if (end > PGDIR_SIZE)
end = PGDIR_SIZE;
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, vaddr);
+ pte_t * pte = pte_alloc_kernel(pmd, vaddr);
if (!pte)
return -ENOMEM;
if (map_pte_uncached(pte, orig_vaddr, end - vaddr, paddr_ptr))
@@ -333,23 +333,33 @@
static int __init
pcxl_dma_init(void)
{
- if (pcxl_dma_start == 0)
- return 0;
+ if (pcxl_dma_start == 0)
+ return 0;
- spin_lock_init(&pcxl_res_lock);
- pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
- pcxl_res_hint = 0;
- pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
+ spin_lock_init(&pcxl_res_lock);
+ pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
+ pcxl_res_hint = 0;
+ pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
get_order(pcxl_res_size));
- memset(pcxl_res_map, 0, pcxl_res_size);
- proc_gsc_root = proc_mkdir("gsc", 0);
- create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info);
- return 0;
+ memset(pcxl_res_map, 0, pcxl_res_size);
+ proc_gsc_root = proc_mkdir("gsc", 0);
+ if (!proc_gsc_root)
+ printk(KERN_WARNING
+ "pcxl_dma_init: Unable to create gsc /proc dir entry\n");
+ else {
+ struct proc_dir_entry* ent;
+ ent = create_proc_info_entry("pcxl_dma", 0,
+ proc_gsc_root, pcxl_proc_info);
+ if (!ent)
+ printk(KERN_WARNING
+ "pci-dma.c: Unable to create pcxl_dma /proc entry.\n");
+ }
+ return 0;
}
__initcall(pcxl_dma_init);
-static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag)
+static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag)
{
unsigned long vaddr;
unsigned long paddr;
@@ -502,13 +512,13 @@
};
static void *fail_alloc_consistent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
return NULL;
}
static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
void *addr = NULL;
@@ -545,16 +555,16 @@
static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
{
+#if 0
u_long i = 0;
unsigned long *res_ptr = (u_long *)pcxl_res_map;
- unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */
+#endif
+ unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */
- sprintf(buf, "\nDMA Mapping Area size : %d bytes (%d pages)\n",
- PCXL_DMA_MAP_SIZE,
- (pcxl_res_size << 3) ); /* 1 bit per page */
+ sprintf(buf, "\nDMA Mapping Area size : %d bytes (%ld pages)\n",
+ PCXL_DMA_MAP_SIZE, total_pages);
- sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n",
- buf, pcxl_res_size, pcxl_res_size << 3); /* 8 bits per byte */
+ sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size);
strcat(buf, " total: free: used: % used:\n");
sprintf(buf, "%sblocks %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size,
@@ -564,7 +574,8 @@
sprintf(buf, "%spages %8ld %8ld %8ld %8ld%%\n", buf, total_pages,
total_pages - pcxl_used_pages, pcxl_used_pages,
(pcxl_used_pages * 100 / total_pages));
-
+
+#if 0
strcat(buf, "\nResource bitmap:");
for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) {
@@ -572,6 +583,7 @@
strcat(buf,"\n ");
sprintf(buf, "%s %08lx", buf, *res_ptr);
}
+#endif
strcat(buf, "\n");
return strlen(buf);
}
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index e6a891a..88cba49 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -202,7 +202,8 @@
pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
{
if (!r->parent) {
- printk(KERN_EMERG "PCI: Tell willy he's wrong\n");
+ printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n",
+ r->start, r->end);
r->parent = hba_res;
/* reverse link is harder *sigh* */
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 01f676d..215d78c 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -41,7 +41,7 @@
/* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems.
* On production kernels EARLY_BOOTUP_DEBUG should be undefined. */
-#undef EARLY_BOOTUP_DEBUG
+#define EARLY_BOOTUP_DEBUG
#include <linux/config.h>
@@ -49,14 +49,8 @@
#include <linux/console.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/tty.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/system.h>
#include <asm/pdc.h> /* for iodc_call() proto and friends */
@@ -96,7 +90,6 @@
}
#if defined(CONFIG_PDC_CONSOLE)
-#define PDC_CONSOLE_DEVICE pdc_console_device
static struct tty_driver * pdc_console_device (struct console *c, int *index)
{
extern struct tty_driver console_driver;
@@ -104,22 +97,19 @@
return &console_driver;
}
#else
-#define PDC_CONSOLE_DEVICE NULL
+#define pdc_console_device NULL
#endif
static struct console pdc_cons = {
.name = "ttyB",
.write = pdc_console_write,
- .device = PDC_CONSOLE_DEVICE,
+ .device = pdc_console_device,
.setup = pdc_console_setup,
- .flags = CON_BOOT|CON_PRINTBUFFER|CON_ENABLED,
+ .flags = CON_BOOT | CON_PRINTBUFFER | CON_ENABLED,
.index = -1,
};
static int pdc_console_initialized;
-extern unsigned long con_start; /* kernel/printk.c */
-extern unsigned long log_end; /* kernel/printk.c */
-
static void pdc_console_init_force(void)
{
@@ -146,27 +136,11 @@
}
-/* Unregister the pdc console with the printk console layer */
-void pdc_console_die(void)
-{
- if (!pdc_console_initialized)
- return;
- --pdc_console_initialized;
-
- printk(KERN_INFO "Switching from PDC console\n");
-
- /* Don't repeat what we've already printed */
- con_start = log_end;
-
- unregister_console(&pdc_cons);
-}
-
-
/*
* Used for emergencies. Currently only used if an HPMC occurs. If an
* HPMC occurs, it is possible that the current console may not be
- * properly initialed after the PDC IO reset. This routine unregisters all
- * of the current consoles, reinitializes the pdc console and
+ * properly initialised after the PDC IO reset. This routine unregisters
+ * all of the current consoles, reinitializes the pdc console and
* registers it.
*/
@@ -177,13 +151,13 @@
if (pdc_console_initialized)
return;
+ /* If we've already seen the output, don't bother to print it again */
+ if (console_drivers != NULL)
+ pdc_cons.flags &= ~CON_PRINTBUFFER;
+
while ((console = console_drivers) != NULL)
unregister_console(console_drivers);
- /* Don't repeat what we've already printed */
- con_start = log_end;
-
/* force registering the pdc console */
pdc_console_init_force();
}
-
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index b3ad0a5..44670d6 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -746,7 +746,8 @@
uint64_t *bptr;
uint32_t dwords;
uint32_t *intrigue_rdr;
- uint64_t *intrigue_bitmask, tmp64, proc_hpa;
+ uint64_t *intrigue_bitmask, tmp64;
+ void __iomem *runway;
struct rdr_tbl_ent *tentry;
int i;
@@ -798,15 +799,16 @@
return -1;
}
- proc_hpa = cpu_device->hpa;
+ runway = ioremap(cpu_device->hpa.start, 4096);
/* Merge intrigue bits into Runway STATUS 0 */
- tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful;
- __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS);
+ tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
+ __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul),
+ runway + RUNWAY_STATUS);
/* Write RUNWAY DEBUG registers */
for (i = 0; i < 8; i++) {
- __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i);
+ __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG);
}
return 0;
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 46b7593..7fdca87 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -9,7 +9,7 @@
* Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org>
* Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com>
- * Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org>
+ * Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org>
* Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
* Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org>
* Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
@@ -245,7 +245,17 @@
sys_clone(unsigned long clone_flags, unsigned long usp,
struct pt_regs *regs)
{
- int __user *user_tid = (int __user *)regs->gr[26];
+ /* Arugments from userspace are:
+ r26 = Clone flags.
+ r25 = Child stack.
+ r24 = parent_tidptr.
+ r23 = Is the TLS storage descriptor
+ r22 = child_tidptr
+
+ However, these last 3 args are only examined
+ if the proper flags are set. */
+ int __user *child_tidptr;
+ int __user *parent_tidptr;
/* usp must be word aligned. This also prevents users from
* passing in the value 1 (which is the signal for a special
@@ -253,10 +263,20 @@
usp = ALIGN(usp, 4);
/* A zero value for usp means use the current stack */
- if(usp == 0)
- usp = regs->gr[30];
+ if (usp == 0)
+ usp = regs->gr[30];
- return do_fork(clone_flags, usp, regs, 0, user_tid, NULL);
+ if (clone_flags & CLONE_PARENT_SETTID)
+ parent_tidptr = (int __user *)regs->gr[24];
+ else
+ parent_tidptr = NULL;
+
+ if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID))
+ child_tidptr = (int __user *)regs->gr[22];
+ else
+ child_tidptr = NULL;
+
+ return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr);
}
int
@@ -332,6 +352,10 @@
} else {
cregs->kpc = (unsigned long) &child_return;
}
+ /* Setup thread TLS area from the 4th parameter in clone */
+ if (clone_flags & CLONE_SETTLS)
+ cregs->cr27 = pregs->gr[23];
+
}
return 0;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index 13b721c..4f5bbcf 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -92,7 +92,7 @@
* May get overwritten by PAT code.
*/
cpuid = boot_cpu_data.cpu_count;
- txn_addr = dev->hpa; /* for legacy PDC */
+ txn_addr = dev->hpa.start; /* for legacy PDC */
#ifdef __LP64__
if (is_pdc_pat()) {
@@ -122,7 +122,7 @@
* boot time (ie shutdown a CPU from an OS perspective).
*/
/* get the cpu number */
- status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa);
+ status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start);
BUG_ON(PDC_OK != status);
@@ -130,7 +130,7 @@
printk(KERN_WARNING "IGNORING CPU at 0x%x,"
" cpu_slot_id > NR_CPUS"
" (%ld > %d)\n",
- dev->hpa, cpu_info.cpu_num, NR_CPUS);
+ dev->hpa.start, cpu_info.cpu_num, NR_CPUS);
/* Ignore CPU since it will only crash */
boot_cpu_data.cpu_count--;
return 1;
@@ -149,7 +149,7 @@
p->loops_per_jiffy = loops_per_jiffy;
p->dev = dev; /* Save IODC data in case we need it */
- p->hpa = dev->hpa; /* save CPU hpa */
+ p->hpa = dev->hpa.start; /* save CPU hpa */
p->cpuid = cpuid; /* save CPU id */
p->txn_addr = txn_addr; /* save CPU IRQ address */
#ifdef CONFIG_SMP
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index f3428e5..18130c3 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -78,7 +78,7 @@
pa_psw(child)->l = 0;
}
-long sys_ptrace(long request, pid_t pid, long addr, long data)
+long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
long ret;
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 8dd5def..8c2859c 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -7,8 +7,10 @@
* Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com)
*
*/
-#include <asm/assembly.h>
+#include <linux/config.h>
+
#include <asm/psw.h>
+#include <asm/assembly.h>
.section .bss
.export real_stack
@@ -20,7 +22,7 @@
real64_stack:
.block 8192
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
# define REG_SZ 8
#else
# define REG_SZ 4
@@ -50,7 +52,7 @@
real32_call_asm:
STREG %rp, -RP_OFFSET(%sp) /* save RP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
callee_save
ldo 2*REG_SZ(%sp), %sp /* room for a couple more saves */
STREG %r27, -1*REG_SZ(%sp)
@@ -77,7 +79,7 @@
b,l save_control_regs,%r2 /* modifies r1, r2, r28 */
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
rsm PSW_SM_W, %r0 /* go narrow */
#endif
@@ -85,7 +87,7 @@
bv 0(%r31)
nop
ric_ret:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ssm PSW_SM_W, %r0 /* go wide */
#endif
/* restore CRs before going virtual in case we page fault */
@@ -97,7 +99,7 @@
tovirt_r1 %sp
LDREG -REG_SZ(%sp), %sp /* restore SP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG -1*REG_SZ(%sp), %r27
LDREG -2*REG_SZ(%sp), %r29
ldo -2*REG_SZ(%sp), %sp
@@ -143,24 +145,21 @@
/* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
* more general-purpose use by the several places which need RFIs
*/
- .align 128
.text
+ .align 128
rfi_virt2real:
/* switch to real mode... */
- ssm 0,0 /* See "relied upon translation" */
- nop /* PA 2.0 Arch. F-5 */
- nop
- nop
+ rsm PSW_SM_I,%r0
+ load32 PA(rfi_v2r_1), %r1
nop
nop
nop
nop
nop
- rsm (PSW_SM_Q|PSW_SM_I),%r0 /* disable Q & I bits to load iia queue */
+ rsm PSW_SM_Q,%r0 /* disable Q & I bits to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- load32 PA(rfi_v2r_1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
@@ -184,10 +183,8 @@
.text
.align 128
rfi_real2virt:
- ssm 0,0 /* See "relied upon translation" */
- nop /* PA 2.0 Arch. F-5 */
- nop
- nop
+ rsm PSW_SM_I,%r0
+ load32 (rfi_r2v_1), %r1
nop
nop
nop
@@ -197,7 +194,6 @@
rsm PSW_SM_Q,%r0 /* disable Q bit to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- load32 (rfi_r2v_1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
@@ -218,7 +214,7 @@
bv 0(%r2)
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/************************ 64-bit real-mode calls ***********************/
/* This is only usable in wide kernels right now and will probably stay so */
@@ -296,7 +292,7 @@
** comparing function pointers.
*/
__canonicalize_funcptr_for_compare:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
bve (%r2)
#else
bv %r0(%r2)
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 0224651..82c24e6 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -490,15 +490,7 @@
give_sigsegv:
DBG(1,"setup_rt_frame: sending SIGSEGV\n");
- if (sig == SIGSEGV)
- ka->sa.sa_handler = SIG_DFL;
- si.si_signo = SIGSEGV;
- si.si_errno = 0;
- si.si_code = SI_KERNEL;
- si.si_pid = current->pid;
- si.si_uid = current->uid;
- si.si_addr = frame;
- force_sig_info(SIGSEGV, &si, current);
+ force_sigsegv(sig, current);
return 0;
}
@@ -633,10 +625,14 @@
put_user(0xe0008200, &usp[3]);
put_user(0x34140000, &usp[4]);
- /* Stack is 64-byte aligned, and we only
- * need to flush 1 cache line */
- asm("fdc 0(%%sr3, %0)\n"
- "fic 0(%%sr3, %0)\n"
+ /* Stack is 64-byte aligned, and we only need
+ * to flush 1 cache line.
+ * Flushing one cacheline is cheap.
+ * "sync" on bigger (> 4 way) boxes is not.
+ */
+ asm("fdc %%r0(%%sr3, %0)\n"
+ "sync\n"
+ "fic %%r0(%%sr3, %0)\n"
"sync\n"
: : "r"(regs->gr[30]));
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index bcc7e83..5db3be4 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -18,7 +18,7 @@
*/
#undef ENTRY_SYS_CPUS /* syscall support for iCOD-like functionality */
-#include <linux/autoconf.h>
+#include <linux/config.h>
#include <linux/types.h>
#include <linux/spinlock.h>
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 8c7a718..b29b76b4 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -6,6 +6,7 @@
* thanks to Philipp Rumpf, Mike Shaver and various others
* sorry about the wall, puffin..
*/
+#include <linux/config.h> /* for CONFIG_SMP */
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
@@ -22,15 +23,13 @@
*/
#define KILL_INSN break 0,0
-#include <linux/config.h> /* for CONFIG_SMP */
-
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.level 2.0w
#else
.level 1.1
#endif
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.macro fixup_branch,lbl
b \lbl
.endm
@@ -103,7 +102,7 @@
mfsp %sr7,%r1 /* save user sr7 */
mtsp %r1,%sr3 /* and store it in sr3 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* for now we can *always* set the W bit on entry to the syscall
* since we don't support wide userland processes. We could
* also save the current SM other than in r0 and restore it on
@@ -155,7 +154,7 @@
STREG %r19, TASK_PT_GR19(%r1)
LDREGM -FRAME_SIZE(%r30), %r2 /* get users sp back */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r2,63,1,%r19 /* W hidden in bottom bit */
#if 0
xor %r19,%r2,%r2 /* clear bottom bit */
@@ -186,7 +185,7 @@
loadgp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
copy %r19,%r2 /* W bit back to r2 */
#else
@@ -205,7 +204,7 @@
/* Note! We cannot use the syscall table that is mapped
nearby since the gateway page is mapped execute-only. */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldil L%sys_call_table, %r1
or,= %r2,%r2,%r2
addil L%(sys_call_table64-sys_call_table), %r1
@@ -321,7 +320,7 @@
LDREG TASK_PT_GR25(%r1), %r25
LDREG TASK_PT_GR24(%r1), %r24
LDREG TASK_PT_GR23(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG TASK_PT_GR22(%r1), %r22
LDREG TASK_PT_GR21(%r1), %r21
ldo -16(%r30),%r29 /* Reference param save area */
@@ -350,7 +349,7 @@
tracesys_exit:
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
bl syscall_trace, %r2
@@ -371,7 +370,7 @@
tracesys_sigexit:
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG 0(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
bl syscall_trace, %r2
@@ -404,7 +403,7 @@
gate .+8, %r0
depi 3, 31, 2, %r31 /* Ensure we return to userspace */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* FIXME: If we are a 64-bit kernel just
* turn this on unconditionally.
*/
@@ -440,7 +439,7 @@
/* Fall through: Return to userspace */
lws_exit:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* decide whether to reset the wide mode bit
*
* For a syscall, the W bit is stored in the lowest bit
@@ -486,7 +485,7 @@
/* ELF64 Process entry path */
lws_compare_and_swap64:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b,n lws_compare_and_swap
#else
/* If we are not a 64-bit kernel, then we don't
@@ -497,7 +496,7 @@
/* ELF32 Process entry path */
lws_compare_and_swap32:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Clip all the input registers */
depdi 0, 31, 32, %r26
depdi 0, 31, 32, %r25
@@ -608,7 +607,7 @@
the other for the store. Either return -EFAULT.
Each of the entries must be relocated. */
.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Pad the address calculation */
.word 0,(2b - linux_gateway_page)
.word 0,(3b - linux_gateway_page)
@@ -619,7 +618,7 @@
.previous
.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Pad the address calculation */
.word 0,(1b - linux_gateway_page)
.word 0,(3b - linux_gateway_page)
@@ -638,7 +637,7 @@
/* Relocate symbols assuming linux_gateway_page is mapped
to virtual address 0x0 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* FIXME: The code will always be on the gateay page
and thus it will be on the first 4k, the
assembler seems to think that the final
@@ -666,7 +665,7 @@
sys_call_table:
#include "syscall_table.S"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.align 4096
.export sys_call_table64
.Lsys_call_table64:
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index dcfa4d3..32cbc04 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -35,7 +35,7 @@
#undef ENTRY_UHOH
#undef ENTRY_COMP
#undef ENTRY_OURS
-#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT)
+#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT)
/* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and
* narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific
* implementation is required on wide palinux. Use ENTRY_COMP where
@@ -46,7 +46,7 @@
#define ENTRY_UHOH(_name_) .dword sys32_##unimplemented
#define ENTRY_OURS(_name_) .dword parisc_##_name_
#define ENTRY_COMP(_name_) .dword compat_sys_##_name_
-#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT)
+#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT)
#define ENTRY_SAME(_name_) .dword sys_##_name_
#define ENTRY_DIFF(_name_) .dword sys_##_name_
#define ENTRY_UHOH(_name_) .dword sys_##_name_
@@ -368,5 +368,11 @@
ENTRY_COMP(mbind) /* 260 */
ENTRY_COMP(get_mempolicy)
ENTRY_COMP(set_mempolicy)
+ ENTRY_SAME(ni_syscall) /* 263: reserved for vserver */
+ ENTRY_SAME(add_key)
+ ENTRY_SAME(request_key) /* 265 */
+ ENTRY_SAME(keyctl)
+ ENTRY_SAME(ioprio_set)
+ ENTRY_SAME(ioprio_get)
/* Nothing yet */
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 7ff67f8..cded256 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -33,10 +33,6 @@
#include <linux/timex.h>
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
/* xtime and wall_jiffies keep wall-clock time */
extern unsigned long wall_jiffies;
@@ -89,14 +85,6 @@
}
}
-#ifdef CONFIG_CHASSIS_LCD_LED
- /* Only schedule the led tasklet on cpu 0, and only if it
- * is enabled.
- */
- if (cpu == 0 && !atomic_read(&led_tasklet.count))
- tasklet_schedule(&led_tasklet);
-#endif
-
/* check soft power switch status */
if (cpu == 0 && !atomic_read(&power_tasklet.count))
tasklet_schedule(&power_tasklet);
@@ -104,6 +92,24 @@
return IRQ_HANDLED;
}
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+
+ if (regs->gr[0] & PSW_N)
+ pc -= 4;
+
+#ifdef CONFIG_SMP
+ if (in_lock_functions(pc))
+ pc = regs->gr[2];
+#endif
+
+ return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+
/*** converted from ia64 ***/
/*
* Return the number of micro-seconds that elapsed since the last
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index d2e5b22..15914f0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -74,7 +74,10 @@
char *level;
unsigned long cr30;
unsigned long cr31;
-
+ /* carlos says that gcc understands better memory in a struct,
+ * and it makes our life easier with fpregs -- T-Bone */
+ struct { u32 sw[2]; } s;
+
level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
printk("%s\n", level); /* don't want to have that pretty register dump messed up */
@@ -103,11 +106,33 @@
printk("%s\n", buf);
}
-#if RIDICULOUSLY_VERBOSE
- for (i = 0; i < 32; i += 2)
- printk("%sFR%02d : %016lx FR%2d : %016lx", level, i,
- regs->fr[i], i+1, regs->fr[i+1]);
-#endif
+ /* FR are 64bit everywhere. Need to use asm to get the content
+ * of fpsr/fper1, and we assume that we won't have a FP Identify
+ * in our way, otherwise we're screwed.
+ * The fldd is used to restore the T-bit if there was one, as the
+ * store clears it anyway.
+ * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */
+ __asm__ (
+ "fstd %%fr0,0(%1) \n\t"
+ "fldd 0(%1),%%fr0 \n\t"
+ : "=m" (s) : "r" (&s) : "%r0"
+ );
+
+ printk("%s\n", level);
+ printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level);
+ printbinary(buf, s.sw[0], 32);
+ printk("%sFPSR: %s\n", level, buf);
+ printk("%sFPER1: %08x\n", level, s.sw[1]);
+
+ /* here we'll print fr0 again, tho it'll be meaningless */
+ for (i = 0; i < 32; i += 4) {
+ int j;
+ p = buf;
+ p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3);
+ for (j = 0; j < 4; j++)
+ p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]);
+ printk("%s\n", buf);
+ }
cr30 = mfctl(30);
cr31 = mfctl(31);
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index 62eea35..eaae8a0 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -513,15 +513,18 @@
register int flop=0; /* true if this is a flop */
/* log a message with pacing */
- if (user_mode(regs))
- {
- if (unaligned_count > 5 && jiffies - last_time > 5*HZ)
- {
+ if (user_mode(regs)) {
+ if (current->thread.flags & PARISC_UAC_SIGBUS) {
+ goto force_sigbus;
+ }
+
+ if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
unaligned_count = 0;
last_time = jiffies;
}
- if (++unaligned_count < 5)
- {
+
+ if (!(current->thread.flags & PARISC_UAC_NOPRINT)
+ && ++unaligned_count < 5) {
char buf[256];
sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n",
current->comm, current->pid, regs->ior, regs->iaoq[0]);
@@ -530,6 +533,7 @@
show_regs(regs);
#endif
}
+
if (!unaligned_enabled)
goto force_sigbus;
}
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 1b91612..e0661c2 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -35,7 +35,7 @@
extrd,u \t2,63,32,\t2
#endif
/* t2 = &__per_cpu_offset[smp_processor_id()]; */
- LDREG,s \t2(\t1),\t2
+ LDREGX \t2(\t1),\t2
addil LT%per_cpu__exception_data,%r27
LDREG RT%per_cpu__exception_data(%r1),\t1
/* t1 = &__get_cpu_var(exception_data) */
@@ -53,6 +53,8 @@
.endm
#endif
+ .level LEVEL
+
.text
.section .fixup, "ax"
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index feb1b9f..b709803 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -339,6 +339,7 @@
pds = (double *)pcs;
pdd = (double *)pcd;
+#if 0
/* Copy 8 doubles at a time */
while (len >= 8*sizeof(double)) {
register double r1, r2, r3, r4, r5, r6, r7, r8;
@@ -366,6 +367,7 @@
fstdma(d_space, r8, pdd, pmc_store_exc);
len -= 8*sizeof(double);
}
+#endif
pws = (unsigned int *)pds;
pwd = (unsigned int *)pdd;
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 2886ad7..29b998e 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -505,7 +505,9 @@
for (j = node_start_pfn(i); j < node_end_pfn(i); j++) {
struct page *p;
+ unsigned long flags;
+ pgdat_resize_lock(NODE_DATA(i), &flags);
p = nid_page_nr(i, j) - node_start_pfn(i);
total++;
@@ -517,6 +519,7 @@
free++;
else
shared += page_count(p) - 1;
+ pgdat_resize_unlock(NODE_DATA(i), &flags);
}
}
#endif
diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c
index f2df502..5c7a1b3 100644
--- a/arch/parisc/mm/ioremap.c
+++ b/arch/parisc/mm/ioremap.c
@@ -52,7 +52,7 @@
if (address >= end)
BUG();
do {
- pte_t * pte = pte_alloc_kernel(NULL, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -75,10 +75,9 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
pmd_t *pmd;
- pmd = pmd_alloc(dir, address);
+ pmd = pmd_alloc(&init_mm, dir, address);
error = -ENOMEM;
if (!pmd)
break;
@@ -89,7 +88,6 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return error;
}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index e43e8ef..117b000 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -102,6 +102,83 @@
}
EXPORT_SYMBOL(phys_mem_access_prot);
+#ifdef CONFIG_MEMORY_HOTPLUG
+
+void online_page(struct page *page)
+{
+ ClearPageReserved(page);
+ free_cold_page(page);
+ totalram_pages++;
+ num_physpages++;
+}
+
+/*
+ * This works only for the non-NUMA case. Later, we'll need a lookup
+ * to convert from real physical addresses to nid, that doesn't use
+ * pfn_to_nid().
+ */
+int __devinit add_memory(u64 start, u64 size)
+{
+ struct pglist_data *pgdata = NODE_DATA(0);
+ struct zone *zone;
+ unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long nr_pages = size >> PAGE_SHIFT;
+
+ /* this should work for most non-highmem platforms */
+ zone = pgdata->node_zones;
+
+ return __add_pages(zone, start_pfn, nr_pages);
+
+ return 0;
+}
+
+/*
+ * First pass at this code will check to determine if the remove
+ * request is within the RMO. Do not allow removal within the RMO.
+ */
+int __devinit remove_memory(u64 start, u64 size)
+{
+ struct zone *zone;
+ unsigned long start_pfn, end_pfn, nr_pages;
+
+ start_pfn = start >> PAGE_SHIFT;
+ nr_pages = size >> PAGE_SHIFT;
+ end_pfn = start_pfn + nr_pages;
+
+ printk("%s(): Attempting to remove memoy in range "
+ "%lx to %lx\n", __func__, start, start+size);
+ /*
+ * check for range within RMO
+ */
+ zone = page_zone(pfn_to_page(start_pfn));
+
+ printk("%s(): memory will be removed from "
+ "the %s zone\n", __func__, zone->name);
+
+ /*
+ * not handling removing memory ranges that
+ * overlap multiple zones yet
+ */
+ if (end_pfn > (zone->zone_start_pfn + zone->spanned_pages))
+ goto overlap;
+
+ /* make sure it is NOT in RMO */
+ if ((start < lmb.rmo_size) || ((start+size) < lmb.rmo_size)) {
+ printk("%s(): range to be removed must NOT be in RMO!\n",
+ __func__);
+ goto in_rmo;
+ }
+
+ return __remove_pages(zone, start_pfn, nr_pages);
+
+overlap:
+ printk("%s(): memory range to be removed overlaps "
+ "multiple zones!!!\n", __func__);
+in_rmo:
+ return -1;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
void show_mem(void)
{
unsigned long total = 0, reserved = 0;
@@ -115,6 +192,8 @@
show_free_areas();
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_pgdat(pgdat) {
+ unsigned long flags;
+ pgdat_resize_lock(pgdat, &flags);
for (i = 0; i < pgdat->node_spanned_pages; i++) {
page = pgdat_page_nr(pgdat, i);
total++;
@@ -127,6 +206,7 @@
else if (page_count(page))
shared += page_count(page) - 1;
}
+ pgdat_resize_unlock(pgdat, &flags);
}
printk("%ld pages of RAM\n", total);
#ifdef CONFIG_HIGHMEM
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 484d24f..b79a782 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -104,7 +104,6 @@
unsigned long vsid;
if (mem_init_done) {
- spin_lock(&init_mm.page_table_lock);
pgdp = pgd_offset_k(ea);
pudp = pud_alloc(&init_mm, pgdp, ea);
if (!pudp)
@@ -112,12 +111,11 @@
pmdp = pmd_alloc(&init_mm, pudp, ea);
if (!pmdp)
return -ENOMEM;
- ptep = pte_alloc_kernel(&init_mm, pmdp, ea);
+ ptep = pte_alloc_kernel(pmdp, ea);
if (!ptep)
return -ENOMEM;
set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
__pgprot(flags)));
- spin_unlock(&init_mm.page_table_lock);
} else {
unsigned long va, vpn, hash, hpteg;
diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h
index a3c38c5..f1c7392 100644
--- a/arch/ppc/8xx_io/cs4218.h
+++ b/arch/ppc/8xx_io/cs4218.h
@@ -78,7 +78,7 @@
const char *name2;
void (*open)(void);
void (*release)(void);
- void *(*dma_alloc)(unsigned int, int);
+ void *(*dma_alloc)(unsigned int, gfp_t);
void (*dma_free)(void *, unsigned int);
int (*irqinit)(void);
#ifdef MODULE
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
index 2ca9ec7..532caa3 100644
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -318,7 +318,7 @@
static struct cs_sound_settings sound;
-static void *CS_Alloc(unsigned int size, int flags);
+static void *CS_Alloc(unsigned int size, gfp_t flags);
static void CS_Free(void *ptr, unsigned int size);
static int CS_IrqInit(void);
#ifdef MODULE
@@ -959,7 +959,7 @@
/*** Low level stuff *********************************************************/
-static void *CS_Alloc(unsigned int size, int flags)
+static void *CS_Alloc(unsigned int size, gfp_t flags)
{
int order;
diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c
index 8edee80..685fd0d 100644
--- a/arch/ppc/kernel/dma-mapping.c
+++ b/arch/ppc/kernel/dma-mapping.c
@@ -115,7 +115,7 @@
};
static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
{
unsigned long addr = head->vm_start, end = head->vm_end - size;
unsigned long flags;
@@ -173,7 +173,7 @@
* virtual and bus address for that space.
*/
void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp)
+__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
{
struct page *page;
struct vm_region *c;
@@ -335,8 +335,6 @@
pte_t *pte;
int ret = 0;
- spin_lock(&init_mm.page_table_lock);
-
do {
pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
@@ -347,7 +345,7 @@
}
WARN_ON(!pmd_none(*pmd));
- pte = pte_alloc_kernel(&init_mm, pmd, CONSISTENT_BASE);
+ pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
if (!pte) {
printk(KERN_ERR "%s: no pte tables\n", __func__);
ret = -ENOMEM;
@@ -357,8 +355,6 @@
consistent_pte = pte;
} while (0);
- spin_unlock(&init_mm.page_table_lock);
-
return ret;
}
diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c
index 76f44ce..53ea723 100644
--- a/arch/ppc/kernel/time.c
+++ b/arch/ppc/kernel/time.c
@@ -66,11 +66,6 @@
#include <asm/time.h>
-/* XXX false sharing with below? */
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
unsigned long disarm_decr[NR_CPUS];
extern struct timezone sys_tz;
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
index b7bcbc2..4d006aa 100644
--- a/arch/ppc/mm/4xx_mmu.c
+++ b/arch/ppc/mm/4xx_mmu.c
@@ -110,13 +110,11 @@
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
- spin_lock(&init_mm.page_table_lock);
pmdp = pmd_offset(pgd_offset_k(v), v);
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
- spin_unlock(&init_mm.page_table_lock);
v += LARGE_PAGE_SIZE_16M;
p += LARGE_PAGE_SIZE_16M;
@@ -127,10 +125,8 @@
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
- spin_lock(&init_mm.page_table_lock);
pmdp = pmd_offset(pgd_offset_k(v), v);
pmd_val(*pmdp) = val;
- spin_unlock(&init_mm.page_table_lock);
v += LARGE_PAGE_SIZE_4M;
p += LARGE_PAGE_SIZE_4M;
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 81a3d74..6ea9185 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -114,9 +114,9 @@
struct page *ptepage;
#ifdef CONFIG_HIGHPTE
- int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+ gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
#else
- int flags = GFP_KERNEL | __GFP_REPEAT;
+ gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
#endif
ptepage = alloc_pages(flags, 0);
@@ -280,18 +280,16 @@
pte_t *pg;
int err = -ENOMEM;
- spin_lock(&init_mm.page_table_lock);
/* Use upper 10 bits of VA to index the first level map */
pd = pmd_offset(pgd_offset_k(va), va);
/* Use middle 10 bits of VA to index the second-level map */
- pg = pte_alloc_kernel(&init_mm, pd, va);
+ pg = pte_alloc_kernel(pd, va);
if (pg != 0) {
err = 0;
set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
if (mem_init_done)
flush_HPTE(0, va, pmd_val(*pd));
}
- spin_unlock(&init_mm.page_table_lock);
return err;
}
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index 2cc12b0..b6a66d5 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -609,11 +609,6 @@
}
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-static int hdpu_ide_check_region(ide_ioreg_t from, unsigned int extent)
-{
- return check_region(from, extent);
-}
-
static void
hdpu_ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
{
diff --git a/arch/ppc64/kernel/hvcserver.c b/arch/ppc64/kernel/hvcserver.c
index bde8f42..4d58417 100644
--- a/arch/ppc64/kernel/hvcserver.c
+++ b/arch/ppc64/kernel/hvcserver.c
@@ -22,6 +22,8 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
+
#include <asm/hvcall.h>
#include <asm/hvcserver.h>
#include <asm/io.h>
diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/ppc64/kernel/ioctl32.c
index a8005db..ba4a899 100644
--- a/arch/ppc64/kernel/ioctl32.c
+++ b/arch/ppc64/kernel/ioctl32.c
@@ -39,9 +39,7 @@
#include <linux/compat_ioctl.h>
#define DECLARES
#include "compat_ioctl.c"
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
+
/* Little p (/dev/rtc, /dev/envctrl, etc.) */
COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */
COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */
diff --git a/arch/ppc64/kernel/vdso.c b/arch/ppc64/kernel/vdso.c
index efa985f..4aacf52 100644
--- a/arch/ppc64/kernel/vdso.c
+++ b/arch/ppc64/kernel/vdso.c
@@ -176,13 +176,13 @@
return NOPAGE_SIGBUS;
/*
- * Last page is systemcfg, special handling here, no get_page() a
- * this is a reserved page
+ * Last page is systemcfg.
*/
if ((vma->vm_end - address) <= PAGE_SIZE)
- return virt_to_page(systemcfg);
+ pg = virt_to_page(systemcfg);
+ else
+ pg = virt_to_page(vbase + offset);
- pg = virt_to_page(vbase + offset);
get_page(pg);
DBG(" ->page count: %d\n", page_count(pg));
@@ -259,7 +259,7 @@
* gettimeofday will be totally dead. It's fine to use that for setting
* breakpoints in the vDSO code pages though
*/
- vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
+ vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | VM_RESERVED;
vma->vm_flags |= mm->def_flags;
vma->vm_page_prot = protection_map[vma->vm_flags & 0x7];
vma->vm_ops = &vdso_vmops;
@@ -603,6 +603,8 @@
ClearPageReserved(pg);
get_page(pg);
}
+
+ get_page(virt_to_page(systemcfg));
}
int in_gate_area_no_task(unsigned long addr)
diff --git a/arch/s390/kernel/compat_ioctl.c b/arch/s390/kernel/compat_ioctl.c
index 24a1e9f..6504c4e 100644
--- a/arch/s390/kernel/compat_ioctl.c
+++ b/arch/s390/kernel/compat_ioctl.c
@@ -18,6 +18,8 @@
#include <asm/dasd.h>
#include <asm/cmb.h>
#include <asm/tape390.h>
+#include <asm/ccwdev.h>
+#include "../../../drivers/s390/char/raw3270.h"
static int do_ioctl32_pointer(unsigned int fd, unsigned int cmd,
unsigned long arg, struct file *f)
@@ -62,6 +64,13 @@
COMPATIBLE_IOCTL(BIODASDCMFDISABLE)
COMPATIBLE_IOCTL(BIODASDREADALLCMB)
+COMPATIBLE_IOCTL(TUBICMD)
+COMPATIBLE_IOCTL(TUBOCMD)
+COMPATIBLE_IOCTL(TUBGETI)
+COMPATIBLE_IOCTL(TUBGETO)
+COMPATIBLE_IOCTL(TUBSETMOD)
+COMPATIBLE_IOCTL(TUBGETMOD)
+
COMPATIBLE_IOCTL(TAPE390_DISPLAY)
/* s390 doesn't need handlers here */
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 55654b6..039354d 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -485,7 +485,9 @@
#
.org 0x10000
startup:basr %r13,0 # get base
-.LPG1: lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
+.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13)
+ basr %r14, %r1
+ lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
la %r12,_pstart-.LPG1(%r13) # pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
@@ -560,6 +562,9 @@
mr %r2,%r1 # mem size in bytes in %r3
b .Lfchunk-.LPG1(%r13)
+ .align 4
+.Lget_ipl_device_addr:
+ .long .Lget_ipl_device
.Lpmask:
.byte 0
.align 8
@@ -755,6 +760,63 @@
.global _pend
_pend:
+.Lget_ipl_device:
+ basr %r12,0
+.LPG2: l %r1,0xb8 # get sid
+ sll %r1,15 # test if subchannel is enabled
+ srl %r1,31
+ ltr %r1,%r1
+ bz 0(%r14) # subchannel disabled
+ l %r1,0xb8
+ la %r5,.Lipl_schib-.LPG2(%r12)
+ stsch 0(%r5) # get schib of subchannel
+ bnz 0(%r14) # schib not available
+ tm 5(%r5),0x01 # devno valid?
+ bno 0(%r14)
+ la %r6,ipl_parameter_flags-.LPG2(%r12)
+ oi 3(%r6),0x01 # set flag
+ la %r2,ipl_devno-.LPG2(%r12)
+ mvc 0(2,%r2),6(%r5) # store devno
+ tm 4(%r5),0x80 # qdio capable device?
+ bno 0(%r14)
+ oi 3(%r6),0x02 # set flag
+
+ # copy ipl parameters
+
+ lhi %r0,4096
+ l %r2,20(%r0) # get address of parameter list
+ lhi %r3,IPL_PARMBLOCK_ORIGIN
+ st %r3,20(%r0)
+ lhi %r4,1
+ cr %r2,%r3 # start parameters < destination ?
+ jl 0f
+ lhi %r1,1 # copy direction is upwards
+ j 1f
+0: lhi %r1,-1 # copy direction is downwards
+ ar %r2,%r0
+ ar %r3,%r0
+ ar %r2,%r1
+ ar %r3,%r1
+1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters
+ ar %r3,%r1
+ ar %r2,%r1
+ sr %r0,%r4
+ jne 1b
+ b 0(%r14)
+
+ .align 4
+.Lipl_schib:
+ .rept 13
+ .long 0
+ .endr
+
+ .globl ipl_parameter_flags
+ipl_parameter_flags:
+ .long 0
+ .globl ipl_devno
+ipl_devno:
+ .word 0
+
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
@@ -764,11 +826,11 @@
#
.globl _stext
_stext: basr %r13,0 # get base
-.LPG2:
+.LPG3:
#
# Setup stack
#
- l %r15,.Linittu-.LPG2(%r13)
+ l %r15,.Linittu-.LPG3(%r13)
mvc __LC_CURRENT(4),__TI_task(%r15)
ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
st %r15,__LC_KERNEL_STACK # set end of kernel stack
@@ -782,8 +844,8 @@
lctl %c0,%c15,0(%r15)
#
- lam 0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
- l %r14,.Lstart-.LPG2(%r13)
+ lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
+ l %r14,.Lstart-.LPG3(%r13)
basr %r14,%r14 # call start_kernel
#
# We returned from start_kernel ?!? PANIK
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index c9ff040..193aafa 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -484,6 +484,8 @@
startup:basr %r13,0 # get base
.LPG1: sll %r13,1 # remove high order bit
srl %r13,1
+ l %r1,.Lget_ipl_device_addr-.LPG1(%r13)
+ basr %r14,%r1
lhi %r1,1 # mode 1 = esame
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,0x12 # switch to esame mode
@@ -556,6 +558,9 @@
mlgr %r2,%r1 # mem size in bytes in %r3
b .Lfchunk-.LPG1(%r13)
+ .align 4
+.Lget_ipl_device_addr:
+ .long .Lget_ipl_device
.Lpmask:
.byte 0
.align 8
@@ -746,6 +751,63 @@
.global _pend
_pend:
+.Lget_ipl_device:
+ basr %r12,0
+.LPG2: l %r1,0xb8 # get sid
+ sll %r1,15 # test if subchannel is enabled
+ srl %r1,31
+ ltr %r1,%r1
+ bz 0(%r14) # subchannel disabled
+ l %r1,0xb8
+ la %r5,.Lipl_schib-.LPG2(%r12)
+ stsch 0(%r5) # get schib of subchannel
+ bnz 0(%r14) # schib not available
+ tm 5(%r5),0x01 # devno valid?
+ bno 0(%r14)
+ la %r6,ipl_parameter_flags-.LPG2(%r12)
+ oi 3(%r6),0x01 # set flag
+ la %r2,ipl_devno-.LPG2(%r12)
+ mvc 0(2,%r2),6(%r5) # store devno
+ tm 4(%r5),0x80 # qdio capable device?
+ bno 0(%r14)
+ oi 3(%r6),0x02 # set flag
+
+ # copy ipl parameters
+
+ lhi %r0,4096
+ l %r2,20(%r0) # get address of parameter list
+ lhi %r3,IPL_PARMBLOCK_ORIGIN
+ st %r3,20(%r0)
+ lhi %r4,1
+ cr %r2,%r3 # start parameters < destination ?
+ jl 0f
+ lhi %r1,1 # copy direction is upwards
+ j 1f
+0: lhi %r1,-1 # copy direction is downwards
+ ar %r2,%r0
+ ar %r3,%r0
+ ar %r2,%r1
+ ar %r3,%r1
+1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters
+ ar %r3,%r1
+ ar %r2,%r1
+ sr %r0,%r4
+ jne 1b
+ b 0(%r14)
+
+ .align 4
+.Lipl_schib:
+ .rept 13
+ .long 0
+ .endr
+
+ .globl ipl_parameter_flags
+ipl_parameter_flags:
+ .long 0
+ .globl ipl_devno
+ipl_devno:
+ .word 0
+
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
@@ -755,7 +817,7 @@
#
.globl _stext
_stext: basr %r13,0 # get base
-.LPG2:
+.LPG3:
#
# Setup stack
#
@@ -774,7 +836,7 @@
lctlg %c0,%c15,0(%r15)
#
- lam 0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
+ lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
brasl %r14,start_kernel # go to C code
#
# We returned from start_kernel ?!? PANIK
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 5204778..31e7b19 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -36,6 +36,7 @@
#include <linux/console.h>
#include <linux/seq_file.h>
#include <linux/kernel_stat.h>
+#include <linux/device.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -685,3 +686,188 @@
.show = show_cpuinfo,
};
+#define DEFINE_IPL_ATTR(_name, _format, _value) \
+static ssize_t ipl_##_name##_show(struct subsystem *subsys, \
+ char *page) \
+{ \
+ return sprintf(page, _format, _value); \
+} \
+static struct subsys_attribute ipl_##_name##_attr = \
+ __ATTR(_name, S_IRUGO, ipl_##_name##_show, NULL);
+
+DEFINE_IPL_ATTR(wwpn, "0x%016llx\n", (unsigned long long)
+ IPL_PARMBLOCK_START->fcp.wwpn);
+DEFINE_IPL_ATTR(lun, "0x%016llx\n", (unsigned long long)
+ IPL_PARMBLOCK_START->fcp.lun);
+DEFINE_IPL_ATTR(bootprog, "%lld\n", (unsigned long long)
+ IPL_PARMBLOCK_START->fcp.bootprog);
+DEFINE_IPL_ATTR(br_lba, "%lld\n", (unsigned long long)
+ IPL_PARMBLOCK_START->fcp.br_lba);
+
+enum ipl_type_type {
+ ipl_type_unknown,
+ ipl_type_ccw,
+ ipl_type_fcp,
+};
+
+static enum ipl_type_type
+get_ipl_type(void)
+{
+ struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
+
+ if (!IPL_DEVNO_VALID)
+ return ipl_type_unknown;
+ if (!IPL_PARMBLOCK_VALID)
+ return ipl_type_ccw;
+ if (ipl->hdr.header.version > IPL_MAX_SUPPORTED_VERSION)
+ return ipl_type_unknown;
+ if (ipl->fcp.pbt != IPL_TYPE_FCP)
+ return ipl_type_unknown;
+ return ipl_type_fcp;
+}
+
+static ssize_t
+ipl_type_show(struct subsystem *subsys, char *page)
+{
+ switch (get_ipl_type()) {
+ case ipl_type_ccw:
+ return sprintf(page, "ccw\n");
+ case ipl_type_fcp:
+ return sprintf(page, "fcp\n");
+ default:
+ return sprintf(page, "unknown\n");
+ }
+}
+
+static struct subsys_attribute ipl_type_attr = __ATTR_RO(ipl_type);
+
+static ssize_t
+ipl_device_show(struct subsystem *subsys, char *page)
+{
+ struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
+
+ switch (get_ipl_type()) {
+ case ipl_type_ccw:
+ return sprintf(page, "0.0.%04x\n", ipl_devno);
+ case ipl_type_fcp:
+ return sprintf(page, "0.0.%04x\n", ipl->fcp.devno);
+ default:
+ return 0;
+ }
+}
+
+static struct subsys_attribute ipl_device_attr =
+ __ATTR(device, S_IRUGO, ipl_device_show, NULL);
+
+static struct attribute *ipl_fcp_attrs[] = {
+ &ipl_type_attr.attr,
+ &ipl_device_attr.attr,
+ &ipl_wwpn_attr.attr,
+ &ipl_lun_attr.attr,
+ &ipl_bootprog_attr.attr,
+ &ipl_br_lba_attr.attr,
+ NULL,
+};
+
+static struct attribute_group ipl_fcp_attr_group = {
+ .attrs = ipl_fcp_attrs,
+};
+
+static struct attribute *ipl_ccw_attrs[] = {
+ &ipl_type_attr.attr,
+ &ipl_device_attr.attr,
+ NULL,
+};
+
+static struct attribute_group ipl_ccw_attr_group = {
+ .attrs = ipl_ccw_attrs,
+};
+
+static struct attribute *ipl_unknown_attrs[] = {
+ &ipl_type_attr.attr,
+ NULL,
+};
+
+static struct attribute_group ipl_unknown_attr_group = {
+ .attrs = ipl_unknown_attrs,
+};
+
+static ssize_t
+ipl_parameter_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+ unsigned int size = IPL_PARMBLOCK_SIZE;
+
+ if (off > size)
+ return 0;
+ if (off + count > size)
+ count = size - off;
+
+ memcpy(buf, (void *) IPL_PARMBLOCK_START + off, count);
+ return count;
+}
+
+static struct bin_attribute ipl_parameter_attr = {
+ .attr = {
+ .name = "binary_parameter",
+ .mode = S_IRUGO,
+ .owner = THIS_MODULE,
+ },
+ .size = PAGE_SIZE,
+ .read = &ipl_parameter_read,
+};
+
+static ssize_t
+ipl_scp_data_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+ unsigned int size = IPL_PARMBLOCK_START->fcp.scp_data_len;
+ void *scp_data = &IPL_PARMBLOCK_START->fcp.scp_data;
+
+ if (off > size)
+ return 0;
+ if (off + count > size)
+ count = size - off;
+
+ memcpy(buf, scp_data + off, count);
+ return count;
+}
+
+static struct bin_attribute ipl_scp_data_attr = {
+ .attr = {
+ .name = "scp_data",
+ .mode = S_IRUGO,
+ .owner = THIS_MODULE,
+ },
+ .size = PAGE_SIZE,
+ .read = &ipl_scp_data_read,
+};
+
+static decl_subsys(ipl, NULL, NULL);
+
+static int __init
+ipl_device_sysfs_register(void) {
+ int rc;
+
+ rc = firmware_register(&ipl_subsys);
+ if (rc)
+ return rc;
+
+ switch (get_ipl_type()) {
+ case ipl_type_ccw:
+ sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_ccw_attr_group);
+ break;
+ case ipl_type_fcp:
+ sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group);
+ sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+ &ipl_parameter_attr);
+ sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+ &ipl_scp_data_attr);
+ break;
+ default:
+ sysfs_create_group(&ipl_subsys.kset.kobj,
+ &ipl_unknown_attr_group);
+ break;
+ }
+ return 0;
+}
+
+__initcall(ipl_device_sysfs_register);
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 2fd75da..9a1d958 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -49,10 +49,6 @@
#define TICK_SIZE tick
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
static ext_int_info_t ext_int_info_cc;
static u64 init_timer_cc;
static u64 jiffies_timer_cc;
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index fa07265..22a895e 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -24,7 +24,6 @@
#include <asm/s390_ext.h>
#include <asm/timer.h>
-#define VTIMER_MAGIC (TIMER_MAGIC + 1)
static ext_int_info_t ext_int_info_timer;
DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer);
@@ -277,20 +276,12 @@
void init_virt_timer(struct vtimer_list *timer)
{
- timer->magic = VTIMER_MAGIC;
timer->function = NULL;
INIT_LIST_HEAD(&timer->entry);
spin_lock_init(&timer->lock);
}
EXPORT_SYMBOL(init_virt_timer);
-static inline int check_vtimer(struct vtimer_list *timer)
-{
- if (timer->magic != VTIMER_MAGIC)
- return -EINVAL;
- return 0;
-}
-
static inline int vtimer_pending(struct vtimer_list *timer)
{
return (!list_empty(&timer->entry));
@@ -346,7 +337,7 @@
static inline int prepare_vtimer(struct vtimer_list *timer)
{
- if (check_vtimer(timer) || !timer->function) {
+ if (!timer->function) {
printk("add_virt_timer: uninitialized timer\n");
return -EINVAL;
}
@@ -414,7 +405,7 @@
unsigned long flags;
int cpu;
- if (check_vtimer(timer) || !timer->function) {
+ if (!timer->function) {
printk("mod_virt_timer: uninitialized timer\n");
return -EINVAL;
}
@@ -481,11 +472,6 @@
unsigned long flags;
struct vtimer_queue *vt_list;
- if (check_vtimer(timer)) {
- printk("del_virt_timer: timer not initialized\n");
- return -EINVAL;
- }
-
/* check if timer is pending */
if (!vtimer_pending(timer))
return 0;
diff --git a/arch/s390/mm/ioremap.c b/arch/s390/mm/ioremap.c
index c6c39d8..0f6e9ec 100644
--- a/arch/s390/mm/ioremap.c
+++ b/arch/s390/mm/ioremap.c
@@ -58,7 +58,7 @@
if (address >= end)
BUG();
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -80,7 +80,6 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
pmd_t *pmd;
pmd = pmd_alloc(&init_mm, dir, address);
@@ -94,7 +93,6 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return 0;
}
diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c
index 1efc18e..6107405 100644
--- a/arch/sh/boards/renesas/rts7751r2d/mach.c
+++ b/arch/sh/boards/renesas/rts7751r2d/mach.c
@@ -23,7 +23,7 @@
extern void *rts7751r2d_ioremap(unsigned long, unsigned long);
extern int rts7751r2d_irq_demux(int irq);
-extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, int);
+extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
/*
diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c
index 5b92585..3d9a02c 100644
--- a/arch/sh/cchips/voyagergx/consistent.c
+++ b/arch/sh/cchips/voyagergx/consistent.c
@@ -31,7 +31,7 @@
#define OHCI_SRAM_SIZE 0x10000
void *voyagergx_consistent_alloc(struct device *dev, size_t size,
- dma_addr_t *handle, int flag)
+ dma_addr_t *handle, gfp_t flag)
{
struct list_head *list = &voya_alloc_list;
struct voya_alloc_entry *entry;
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 71a6d4e..6e3b58b 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/module.h>
+#include <linux/string.h>
#include <asm/dma.h>
static struct sysdev_class dma_sysclass = {
diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c
index 83de7ef..e12418b 100644
--- a/arch/sh/drivers/pci/dma-dreamcast.c
+++ b/arch/sh/drivers/pci/dma-dreamcast.c
@@ -33,7 +33,7 @@
static int gapspci_dma_used = 0;
void *dreamcast_consistent_alloc(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
unsigned long buf;
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
index e0b384b..47abf6e 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/arch/sh/kernel/cpufreq.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/cpumask.h>
#include <linux/smp.h>
+#include <linux/sched.h> /* set_cpus_allowed() */
#include <asm/processor.h>
#include <asm/watchdog.h>
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index b28919b..1fbe5a4 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -80,7 +80,7 @@
/* nothing to do.. */
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
struct user * dummy = NULL;
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 02ca699..671b876 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -56,10 +56,6 @@
#define TICK_SIZE (tick_nsec / 1000)
DEFINE_SPINLOCK(tmu0_lock);
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
/* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want
* these routines anywhere... */
#ifdef CONFIG_SH_RTC
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 1f7af0c..df3a9e4 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -11,7 +11,7 @@
#include <linux/dma-mapping.h>
#include <asm/io.h>
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle)
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle)
{
struct page *page, *end, *free;
void *ret;
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 7abba21..775f86c 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -194,10 +194,13 @@
unsigned long address)
{
unsigned long addrmax = P4SEG;
- pgd_t *dir;
+ pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
pte_t entry;
+ struct mm_struct *mm;
+ spinlock_t *ptl;
+ int ret = 1;
#ifdef CONFIG_SH_KGDB
if (kgdb_nofault && kgdb_bus_err_hook)
@@ -208,28 +211,28 @@
addrmax = P4SEG_STORE_QUE + 0x04000000;
#endif
- if (address >= P3SEG && address < addrmax)
- dir = pgd_offset_k(address);
- else if (address >= TASK_SIZE)
+ if (address >= P3SEG && address < addrmax) {
+ pgd = pgd_offset_k(address);
+ mm = NULL;
+ } else if (address >= TASK_SIZE)
return 1;
- else if (!current->mm)
+ else if (!(mm = current->mm))
return 1;
else
- dir = pgd_offset(current->mm, address);
+ pgd = pgd_offset(mm, address);
- pmd = pmd_offset(dir, address);
- if (pmd_none(*pmd))
+ pmd = pmd_offset(pgd, address);
+ if (pmd_none_or_clear_bad(pmd))
return 1;
- if (pmd_bad(*pmd)) {
- pmd_ERROR(*pmd);
- pmd_clear(pmd);
- return 1;
- }
- pte = pte_offset_kernel(pmd, address);
+ if (mm)
+ pte = pte_offset_map_lock(mm, pmd, address, &ptl);
+ else
+ pte = pte_offset_kernel(pmd, address);
+
entry = *pte;
if (pte_none(entry) || pte_not_present(entry)
|| (writeaccess && !pte_write(entry)))
- return 1;
+ goto unlock;
if (writeaccess)
entry = pte_mkdirty(entry);
@@ -251,8 +254,11 @@
set_pte(pte, entry);
update_mmu_cache(NULL, address, entry);
-
- return 0;
+ ret = 0;
+unlock:
+ if (mm)
+ pte_unmap_unlock(pte, ptl);
+ return ret;
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 95bb1a6..6b7a768 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -54,8 +54,6 @@
return pte;
}
-#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0)
-
void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t entry)
{
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
index 9f490c2..e794e27 100644
--- a/arch/sh/mm/ioremap.c
+++ b/arch/sh/mm/ioremap.c
@@ -57,7 +57,7 @@
if (address >= end)
BUG();
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -79,7 +79,6 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
pmd_t *pmd;
pmd = pmd_alloc(&init_mm, dir, address);
@@ -93,7 +92,6 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return error;
}
diff --git a/arch/sh64/kernel/ptrace.c b/arch/sh64/kernel/ptrace.c
index fd20009..71f2eec 100644
--- a/arch/sh64/kernel/ptrace.c
+++ b/arch/sh64/kernel/ptrace.c
@@ -121,7 +121,7 @@
return 0;
}
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
extern void poke_real_address_q(unsigned long long addr, unsigned long long data);
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
index f4a62a1..870fe53 100644
--- a/arch/sh64/kernel/time.c
+++ b/arch/sh64/kernel/time.c
@@ -116,8 +116,6 @@
extern unsigned long wall_jiffies;
-u64 jiffies_64 = INITIAL_JIFFIES;
-
static unsigned long tmu_base, rtc_base;
unsigned long cprc_base;
@@ -253,6 +251,7 @@
return 0;
}
+EXPORT_SYMBOL(do_settimeofday);
static int set_rtc_time(unsigned long nowtime)
{
diff --git a/arch/sh64/mm/cache.c b/arch/sh64/mm/cache.c
index 3b87e25..c0c1b21 100644
--- a/arch/sh64/mm/cache.c
+++ b/arch/sh64/mm/cache.c
@@ -584,32 +584,36 @@
}
}
-static void sh64_dcache_purge_user_page(struct mm_struct *mm, unsigned long eaddr)
+static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
+ unsigned long addr, unsigned long end)
{
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
pte_t entry;
+ spinlock_t *ptl;
unsigned long paddr;
- /* NOTE : all the callers of this have mm->page_table_lock held, so the
- following page table traversal is safe even on SMP/pre-emptible. */
+ if (!mm)
+ return; /* No way to find physical address of page */
- if (!mm) return; /* No way to find physical address of page */
- pgd = pgd_offset(mm, eaddr);
- if (pgd_bad(*pgd)) return;
+ pgd = pgd_offset(mm, addr);
+ if (pgd_bad(*pgd))
+ return;
- pmd = pmd_offset(pgd, eaddr);
- if (pmd_none(*pmd) || pmd_bad(*pmd)) return;
+ pmd = pmd_offset(pgd, addr);
+ if (pmd_none(*pmd) || pmd_bad(*pmd))
+ return;
- pte = pte_offset_kernel(pmd, eaddr);
- entry = *pte;
- if (pte_none(entry) || !pte_present(entry)) return;
-
- paddr = pte_val(entry) & PAGE_MASK;
-
- sh64_dcache_purge_coloured_phy_page(paddr, eaddr);
-
+ pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ do {
+ entry = *pte;
+ if (pte_none(entry) || !pte_present(entry))
+ continue;
+ paddr = pte_val(entry) & PAGE_MASK;
+ sh64_dcache_purge_coloured_phy_page(paddr, addr);
+ } while (pte++, addr += PAGE_SIZE, addr != end);
+ pte_unmap_unlock(pte - 1, ptl);
}
/****************************************************************************/
@@ -668,7 +672,7 @@
int n_pages;
n_pages = ((end - start) >> PAGE_SHIFT);
- if (n_pages >= 64) {
+ if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) {
#if 1
sh64_dcache_purge_all();
#else
@@ -707,20 +711,10 @@
}
#endif
} else {
- /* 'Small' range */
- unsigned long aligned_start;
- unsigned long eaddr;
- unsigned long last_page_start;
-
- aligned_start = start & PAGE_MASK;
- /* 'end' is 1 byte beyond the end of the range */
- last_page_start = (end - 1) & PAGE_MASK;
-
- eaddr = aligned_start;
- while (eaddr <= last_page_start) {
- sh64_dcache_purge_user_page(mm, eaddr);
- eaddr += PAGE_SIZE;
- }
+ /* Small range, covered by a single page table page */
+ start &= PAGE_MASK; /* should already be so */
+ end = PAGE_ALIGN(end); /* should already be so */
+ sh64_dcache_purge_user_pages(mm, start, end);
}
return;
}
@@ -880,9 +874,7 @@
addresses from the user address space specified by mm, after writing
back any dirty data.
- Note(1), 'end' is 1 byte beyond the end of the range to flush.
-
- Note(2), this is called with mm->page_table_lock held.*/
+ Note, 'end' is 1 byte beyond the end of the range to flush. */
sh64_dcache_purge_user_range(mm, start, end);
sh64_icache_inv_user_page_range(mm, start, end);
@@ -898,7 +890,7 @@
the I-cache must be searched too in case the page in question is
both writable and being executed from (e.g. stack trampolines.)
- Note(1), this is called with mm->page_table_lock held.
+ Note, this is called with pte lock held.
*/
sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
diff --git a/arch/sh64/mm/hugetlbpage.c b/arch/sh64/mm/hugetlbpage.c
index dcd9c8a..ed6a505 100644
--- a/arch/sh64/mm/hugetlbpage.c
+++ b/arch/sh64/mm/hugetlbpage.c
@@ -54,41 +54,31 @@
return pte;
}
-#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0)
-
-static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma,
- struct page *page, pte_t * page_table, int write_access)
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t entry)
{
- unsigned long i;
- pte_t entry;
-
- add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE);
-
- if (write_access)
- entry = pte_mkwrite(pte_mkdirty(mk_pte(page,
- vma->vm_page_prot)));
- else
- entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot));
- entry = pte_mkyoung(entry);
- mk_pte_huge(entry);
+ int i;
for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
- set_pte(page_table, entry);
- page_table++;
-
+ set_pte_at(mm, addr, ptep, entry);
+ ptep++;
+ addr += PAGE_SIZE;
pte_val(entry) += PAGE_SIZE;
}
}
-pte_t huge_ptep_get_and_clear(pte_t *ptep)
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
{
pte_t entry;
+ int i;
entry = *ptep;
for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
- pte_clear(pte);
- pte++;
+ pte_clear(mm, addr, ptep);
+ addr += PAGE_SIZE;
+ ptep++;
}
return entry;
@@ -106,79 +96,6 @@
return 0;
}
-int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
- struct vm_area_struct *vma)
-{
- pte_t *src_pte, *dst_pte, entry;
- struct page *ptepage;
- unsigned long addr = vma->vm_start;
- unsigned long end = vma->vm_end;
- int i;
-
- while (addr < end) {
- dst_pte = huge_pte_alloc(dst, addr);
- if (!dst_pte)
- goto nomem;
- src_pte = huge_pte_offset(src, addr);
- BUG_ON(!src_pte || pte_none(*src_pte));
- entry = *src_pte;
- ptepage = pte_page(entry);
- get_page(ptepage);
- for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
- set_pte(dst_pte, entry);
- pte_val(entry) += PAGE_SIZE;
- dst_pte++;
- }
- add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE);
- addr += HPAGE_SIZE;
- }
- return 0;
-
-nomem:
- return -ENOMEM;
-}
-
-int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
- struct page **pages, struct vm_area_struct **vmas,
- unsigned long *position, int *length, int i)
-{
- unsigned long vaddr = *position;
- int remainder = *length;
-
- WARN_ON(!is_vm_hugetlb_page(vma));
-
- while (vaddr < vma->vm_end && remainder) {
- if (pages) {
- pte_t *pte;
- struct page *page;
-
- pte = huge_pte_offset(mm, vaddr);
-
- /* hugetlb should be locked, and hence, prefaulted */
- BUG_ON(!pte || pte_none(*pte));
-
- page = pte_page(*pte);
-
- WARN_ON(!PageCompound(page));
-
- get_page(page);
- pages[i] = page;
- }
-
- if (vmas)
- vmas[i] = vma;
-
- vaddr += PAGE_SIZE;
- --remainder;
- ++i;
- }
-
- *length = remainder;
- *position = vaddr;
-
- return i;
-}
-
struct page *follow_huge_addr(struct mm_struct *mm,
unsigned long address, int write)
{
@@ -195,84 +112,3 @@
{
return NULL;
}
-
-void unmap_hugepage_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
- unsigned long address;
- pte_t *pte;
- struct page *page;
- int i;
-
- BUG_ON(start & (HPAGE_SIZE - 1));
- BUG_ON(end & (HPAGE_SIZE - 1));
-
- for (address = start; address < end; address += HPAGE_SIZE) {
- pte = huge_pte_offset(mm, address);
- BUG_ON(!pte);
- if (pte_none(*pte))
- continue;
- page = pte_page(*pte);
- put_page(page);
- for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
- pte_clear(mm, address+(i*PAGE_SIZE), pte);
- pte++;
- }
- }
- add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT));
- flush_tlb_range(vma, start, end);
-}
-
-int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma)
-{
- struct mm_struct *mm = current->mm;
- unsigned long addr;
- int ret = 0;
-
- BUG_ON(vma->vm_start & ~HPAGE_MASK);
- BUG_ON(vma->vm_end & ~HPAGE_MASK);
-
- spin_lock(&mm->page_table_lock);
- for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
- unsigned long idx;
- pte_t *pte = huge_pte_alloc(mm, addr);
- struct page *page;
-
- if (!pte) {
- ret = -ENOMEM;
- goto out;
- }
- if (!pte_none(*pte))
- continue;
-
- idx = ((addr - vma->vm_start) >> HPAGE_SHIFT)
- + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
- page = find_get_page(mapping, idx);
- if (!page) {
- /* charge the fs quota first */
- if (hugetlb_get_quota(mapping)) {
- ret = -ENOMEM;
- goto out;
- }
- page = alloc_huge_page();
- if (!page) {
- hugetlb_put_quota(mapping);
- ret = -ENOMEM;
- goto out;
- }
- ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC);
- if (! ret) {
- unlock_page(page);
- } else {
- hugetlb_put_quota(mapping);
- free_huge_page(page);
- goto out;
- }
- }
- set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE);
- }
-out:
- spin_unlock(&mm->page_table_lock);
- return ret;
-}
diff --git a/arch/sh64/mm/ioremap.c b/arch/sh64/mm/ioremap.c
index f4003da..fb1866f 100644
--- a/arch/sh64/mm/ioremap.c
+++ b/arch/sh64/mm/ioremap.c
@@ -79,7 +79,7 @@
BUG();
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -101,7 +101,6 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
error = -ENOMEM;
@@ -115,7 +114,6 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
dir++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return 0;
}
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 36a4069..25e31d5 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -497,8 +497,8 @@
* CheerIO makes a similar conversion.
* See ebus.c for details.
*
- * Note that check_region()/request_region()
- * work for these devices.
+ * Note that request_region()
+ * works for these devices.
*
* XXX Neat trick, but it's a *bad* idea
* to shit into regions like that.
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 279a626..24814d5 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -45,10 +45,6 @@
extern unsigned long wall_jiffies;
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
DEFINE_SPINLOCK(rtc_lock);
enum sparc_clock_type sp_clock_typ;
DEFINE_SPINLOCK(mostek_lock);
diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c
index 20ccb95..9604893 100644
--- a/arch/sparc/mm/generic.c
+++ b/arch/sparc/mm/generic.c
@@ -73,14 +73,16 @@
int space = GET_IOSPACE(pfn);
unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+ /* See comment in mm/memory.c remap_pfn_range */
+ vma->vm_flags |= VM_IO | VM_RESERVED;
+
prot = __pgprot(pg_iobits);
offset -= from;
dir = pgd_offset(mm, from);
flush_cache_range(vma, beg, end);
- spin_lock(&mm->page_table_lock);
while (from < end) {
- pmd_t *pmd = pmd_alloc(current->mm, dir, from);
+ pmd_t *pmd = pmd_alloc(mm, dir, from);
error = -ENOMEM;
if (!pmd)
break;
@@ -90,7 +92,6 @@
from = (from + PGDIR_SIZE) & PGDIR_MASK;
dir++;
}
- spin_unlock(&mm->page_table_lock);
flush_tlb_range(vma, beg, end);
return error;
diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c
index b2854ef..edf52d0 100644
--- a/arch/sparc64/kernel/binfmt_aout32.c
+++ b/arch/sparc64/kernel/binfmt_aout32.c
@@ -241,7 +241,6 @@
current->mm->brk = ex.a_bss +
(current->mm->start_brk = N_BSSADDR(ex));
- set_mm_counter(current->mm, rss, 0);
current->mm->mmap = NULL;
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
diff --git a/arch/sparc64/kernel/ioctl32.c b/arch/sparc64/kernel/ioctl32.c
index 43fc317..e6a0032 100644
--- a/arch/sparc64/kernel/ioctl32.c
+++ b/arch/sparc64/kernel/ioctl32.c
@@ -475,9 +475,6 @@
#include <linux/compat_ioctl.h>
#define DECLARES
#include "compat_ioctl.c"
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
COMPATIBLE_IOCTL(FBIOGTYPE)
COMPATIBLE_IOCTL(FBIOSATTR)
COMPATIBLE_IOCTL(FBIOGATTR)
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index 3f08a32..38c5525 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -55,10 +55,6 @@
extern unsigned long wall_jiffies;
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
static void __iomem *mstk48t08_regs;
static void __iomem *mstk48t59_regs;
diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c
index c954d91..112c316 100644
--- a/arch/sparc64/mm/generic.c
+++ b/arch/sparc64/mm/generic.c
@@ -127,14 +127,16 @@
int space = GET_IOSPACE(pfn);
unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+ /* See comment in mm/memory.c remap_pfn_range */
+ vma->vm_flags |= VM_IO | VM_RESERVED;
+
prot = __pgprot(pg_iobits);
offset -= from;
dir = pgd_offset(mm, from);
flush_cache_range(vma, beg, end);
- spin_lock(&mm->page_table_lock);
while (from < end) {
- pud_t *pud = pud_alloc(current->mm, dir, from);
+ pud_t *pud = pud_alloc(mm, dir, from);
error = -ENOMEM;
if (!pud)
break;
@@ -144,8 +146,7 @@
from = (from + PGDIR_SIZE) & PGDIR_MASK;
dir++;
}
- flush_tlb_range(vma, beg, end);
- spin_unlock(&mm->page_table_lock);
+ flush_tlb_range(vma, beg, end);
return error;
}
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index 90ca99d..8b104be 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -18,8 +18,7 @@
/* Heavily inspired by the ppc64 code. */
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) =
- { NULL, 0, 0, 0, 0, 0, { 0 }, { NULL }, };
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, };
void flush_tlb_pending(void)
{
@@ -72,7 +71,7 @@
no_cache_flush:
- if (mp->tlb_frozen)
+ if (mp->fullmm)
return;
nr = mp->tlb_nr;
@@ -97,7 +96,7 @@
unsigned long nr = mp->tlb_nr;
long s = start, e = end, vpte_base;
- if (mp->tlb_frozen)
+ if (mp->fullmm)
return;
/* If start is greater than end, that is a real problem. */
diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c
index d7c1c76..fc6669e 100644
--- a/arch/sparc64/solaris/socksys.c
+++ b/arch/sparc64/solaris/socksys.c
@@ -49,7 +49,7 @@
#else
-extern void * mykmalloc(size_t s, int gfp);
+extern void * mykmalloc(size_t s, gfp_t gfp);
extern void mykfree(void *);
#endif
diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c
index aaad29c..b84e545 100644
--- a/arch/sparc64/solaris/timod.c
+++ b/arch/sparc64/solaris/timod.c
@@ -39,7 +39,7 @@
#else
-void * mykmalloc(size_t s, int gfp)
+void * mykmalloc(size_t s, gfp_t gfp)
{
static char * page;
static size_t free;
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 684e1f8..cd06ed7 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -27,10 +27,6 @@
bool
default y
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
config GENERIC_CALIBRATE_DELAY
bool
default y
@@ -40,6 +36,12 @@
bool
default y
+menu "Host processor type and features"
+
+source "arch/i386/Kconfig.cpu"
+
+endmenu
+
menu "UML-specific options"
config MODE_TT
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
index bd35e59..aae19bc 100644
--- a/arch/um/Kconfig.x86_64
+++ b/arch/um/Kconfig.x86_64
@@ -6,6 +6,11 @@
bool
default y
+#XXX: this is so in the underlying arch, but it's wrong!!!
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
config SEMAPHORE_SLEEPERS
bool
default y
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
index 2ee8a28..aef7c50 100644
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@@ -29,6 +29,12 @@
CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH)
-ifneq ($(CONFIG_GPROF),y)
-ARCH_CFLAGS += -DUM_FASTCALL
-endif
+# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
+include $(srctree)/arch/i386/Makefile.cpu
+
+# prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
+cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
+
+CFLAGS += $(cflags-y)
+USER_CFLAGS += $(cflags-y)
+
diff --git a/arch/um/include/sysdep-i386/syscalls.h b/arch/um/include/sysdep-i386/syscalls.h
index a0d5b74..57bd79e 100644
--- a/arch/um/include/sysdep-i386/syscalls.h
+++ b/arch/um/include/sysdep-i386/syscalls.h
@@ -11,7 +11,6 @@
/* Not declared on x86, incompatible declarations on x86_64, so these have
* to go here rather than in sys_call_table.c
*/
-extern syscall_handler_t sys_ptrace;
extern syscall_handler_t sys_rt_sigaction;
extern syscall_handler_t old_mmap_i386;
diff --git a/arch/um/include/tlb.h b/arch/um/include/tlb.h
index 45d7da6..8efc1e0 100644
--- a/arch/um/include/tlb.h
+++ b/arch/um/include/tlb.h
@@ -34,7 +34,6 @@
} u;
};
-extern void mprotect_kernel_vm(int w);
extern void force_flush_all(void);
extern void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
unsigned long end_addr, int force,
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index ea008b0..462cc9d 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -252,7 +252,7 @@
#endif
}
-struct page *arch_validate(struct page *page, int mask, int order)
+struct page *arch_validate(struct page *page, gfp_t mask, int order)
{
unsigned long addr, zero = 0;
int i;
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index ea65db6..34b54a3 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -80,7 +80,7 @@
unsigned long alloc_stack(int order, int atomic)
{
unsigned long page;
- int flags = GFP_KERNEL;
+ gfp_t flags = GFP_KERNEL;
if (atomic)
flags = GFP_ATOMIC;
@@ -222,6 +222,7 @@
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
+ pte_t ptent;
if(task->mm == NULL)
return(ERR_PTR(-EINVAL));
@@ -238,12 +239,13 @@
return(ERR_PTR(-EINVAL));
pte = pte_offset_kernel(pmd, addr);
- if(!pte_present(*pte))
+ ptent = *pte;
+ if(!pte_present(ptent))
return(ERR_PTR(-EINVAL));
if(pte_out != NULL)
- *pte_out = *pte;
- return((void *) (pte_val(*pte) & PAGE_MASK) + (addr & ~PAGE_MASK));
+ *pte_out = ptent;
+ return((void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK));
}
char *current_cmd(void)
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index 240143b..9e5e39c 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -28,7 +28,6 @@
pmd_t *pmd;
pte_t *pte;
- spin_lock(&mm->page_table_lock);
pgd = pgd_offset(mm, proc);
pud = pud_alloc(mm, pgd, proc);
if (!pud)
@@ -63,7 +62,6 @@
*pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT));
*pte = pte_mkexec(*pte);
*pte = pte_wrprotect(*pte);
- spin_unlock(&mm->page_table_lock);
return(0);
out_pmd:
@@ -71,7 +69,6 @@
out_pte:
pmd_free(pmd);
out:
- spin_unlock(&mm->page_table_lock);
return(-ENOMEM);
}
@@ -147,6 +144,7 @@
if(!proc_mm || !ptrace_faultinfo){
free_page(mmu->id.stack);
+ pte_lock_deinit(virt_to_page(mmu->last_page_table));
pte_free_kernel((pte_t *) mmu->last_page_table);
dec_page_state(nr_page_table_pages);
#ifdef CONFIG_3_LEVEL_PGTABLES
diff --git a/arch/um/kernel/time_kern.c b/arch/um/kernel/time_kern.c
index 4e08f75..020ca79 100644
--- a/arch/um/kernel/time_kern.c
+++ b/arch/um/kernel/time_kern.c
@@ -22,10 +22,6 @@
#include "mode.h"
#include "os.h"
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
int hz(void)
{
return(HZ);
diff --git a/arch/um/kernel/tt/tlb.c b/arch/um/kernel/tt/tlb.c
index f1d85db..ae6217c 100644
--- a/arch/um/kernel/tt/tlb.c
+++ b/arch/um/kernel/tt/tlb.c
@@ -74,42 +74,6 @@
atomic_inc(&vmchange_seq);
}
-static void protect_vm_page(unsigned long addr, int w, int must_succeed)
-{
- int err;
-
- err = protect_memory(addr, PAGE_SIZE, 1, w, 1, must_succeed);
- if(err == 0) return;
- else if((err == -EFAULT) || (err == -ENOMEM)){
- flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
- protect_vm_page(addr, w, 1);
- }
- else panic("protect_vm_page : protect failed, errno = %d\n", err);
-}
-
-void mprotect_kernel_vm(int w)
-{
- struct mm_struct *mm;
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- unsigned long addr;
-
- mm = &init_mm;
- for(addr = start_vm; addr < end_vm;){
- pgd = pgd_offset(mm, addr);
- pud = pud_offset(pgd, addr);
- pmd = pmd_offset(pud, addr);
- if(pmd_present(*pmd)){
- pte = pte_offset_kernel(pmd, addr);
- if(pte_present(*pte)) protect_vm_page(addr, w, 0);
- addr += PAGE_SIZE;
- }
- else addr += PMD_SIZE;
- }
-}
-
void flush_tlb_kernel_vm_tt(void)
{
flush_tlb_kernel_range(start_vm, end_vm);
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
index 4726b87..d6077ff 100644
--- a/arch/v850/kernel/ptrace.c
+++ b/arch/v850/kernel/ptrace.c
@@ -113,7 +113,7 @@
return 1;
}
-int sys_ptrace(long request, long pid, long addr, long data)
+long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int rval;
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
index ea3fd88..c1e85c2 100644
--- a/arch/v850/kernel/time.c
+++ b/arch/v850/kernel/time.c
@@ -26,10 +26,6 @@
#include "mach.h"
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
#define TICK_SIZE (tick_nsec / 1000)
/*
diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c
index 3e6780f..93c60f4 100644
--- a/arch/x86_64/ia32/ia32_aout.c
+++ b/arch/x86_64/ia32/ia32_aout.c
@@ -314,7 +314,6 @@
current->mm->free_area_cache = TASK_UNMAPPED_BASE;
current->mm->cached_hole_size = 0;
- set_mm_counter(current->mm, rss, 0);
current->mm->mmap = NULL;
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c
index 419758f..4ba0e29 100644
--- a/arch/x86_64/ia32/ia32_ioctl.c
+++ b/arch/x86_64/ia32/ia32_ioctl.c
@@ -12,40 +12,11 @@
#define INCLUDES
#include <linux/syscalls.h>
#include "compat_ioctl.c"
-#include <asm/mtrr.h>
#include <asm/ia32.h>
#define CODE
#include "compat_ioctl.c"
-#ifndef TIOCGDEV
-#define TIOCGDEV _IOR('T',0x32, unsigned int)
-#endif
-static int tiocgdev(unsigned fd, unsigned cmd, unsigned int __user *ptr)
-{
-
- struct file *file;
- struct tty_struct *real_tty;
- int fput_needed, ret;
-
- file = fget_light(fd, &fput_needed);
- if (!file)
- return -EBADF;
-
- ret = -EINVAL;
- if (file->f_op->ioctl != tty_ioctl)
- goto out;
- real_tty = (struct tty_struct *)file->private_data;
- if (!real_tty)
- goto out;
-
- ret = put_user(new_encode_dev(tty_devnum(real_tty)), ptr);
-
-out:
- fput_light(file, fput_needed);
- return ret;
-}
-
#define RTC_IRQP_READ32 _IOR('p', 0x0b, unsigned int) /* Read IRQ rate */
#define RTC_IRQP_SET32 _IOW('p', 0x0c, unsigned int) /* Set IRQ rate */
#define RTC_EPOCH_READ32 _IOR('p', 0x0d, unsigned) /* Read epoch */
@@ -85,90 +56,6 @@
return sys_ioctl(fd,cmd,arg);
}
-/* /proc/mtrr ioctls */
-
-
-struct mtrr_sentry32
-{
- compat_ulong_t base; /* Base address */
- compat_uint_t size; /* Size of region */
- compat_uint_t type; /* Type of region */
-};
-
-struct mtrr_gentry32
-{
- compat_ulong_t regnum; /* Register number */
- compat_uint_t base; /* Base address */
- compat_uint_t size; /* Size of region */
- compat_uint_t type; /* Type of region */
-};
-
-#define MTRR_IOCTL_BASE 'M'
-
-#define MTRRIOC32_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry32)
-#define MTRRIOC32_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry32)
-#define MTRRIOC32_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry32)
-#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry32)
-#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry32)
-#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry32)
-
-
-static int mtrr_ioctl32(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
- struct mtrr_gentry g;
- struct mtrr_sentry s;
- int get = 0, err = 0;
- struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)arg;
- mm_segment_t oldfs = get_fs();
-
- switch (cmd) {
-#define SET(x) case MTRRIOC32_ ## x ## _ENTRY: cmd = MTRRIOC_ ## x ## _ENTRY; break
-#define GET(x) case MTRRIOC32_ ## x ## _ENTRY: cmd = MTRRIOC_ ## x ## _ENTRY; get=1; break
- SET(ADD);
- SET(SET);
- SET(DEL);
- GET(GET);
- SET(KILL);
- SET(ADD_PAGE);
- SET(SET_PAGE);
- SET(DEL_PAGE);
- GET(GET_PAGE);
- SET(KILL_PAGE);
- }
-
- if (get) {
- err = get_user(g.regnum, &g32->regnum);
- err |= get_user(g.base, &g32->base);
- err |= get_user(g.size, &g32->size);
- err |= get_user(g.type, &g32->type);
-
- arg = (unsigned long)&g;
- } else {
- struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)arg;
- err = get_user(s.base, &s32->base);
- err |= get_user(s.size, &s32->size);
- err |= get_user(s.type, &s32->type);
-
- arg = (unsigned long)&s;
- }
- if (err) return err;
-
- set_fs(KERNEL_DS);
- err = sys_ioctl(fd, cmd, arg);
- set_fs(oldfs);
-
- if (!err && get) {
- err = put_user(g.base, &g32->base);
- err |= put_user(g.size, &g32->size);
- err |= put_user(g.regnum, &g32->regnum);
- err |= put_user(g.type, &g32->type);
- }
- return err;
-}
#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler) },
#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl)
@@ -185,7 +72,6 @@
COMPATIBLE_IOCTL(FIOQSIZE)
/* And these ioctls need translation */
-HANDLE_IOCTL(TIOCGDEV, tiocgdev)
/* realtime device */
HANDLE_IOCTL(RTC_IRQP_READ, rtc32_ioctl)
HANDLE_IOCTL(RTC_IRQP_READ32,rtc32_ioctl)
@@ -193,17 +79,6 @@
HANDLE_IOCTL(RTC_EPOCH_READ32, rtc32_ioctl)
HANDLE_IOCTL(RTC_EPOCH_SET32, rtc32_ioctl)
/* take care of sizeof(sizeof()) breakage */
-/* mtrr */
-HANDLE_IOCTL(MTRRIOC32_ADD_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_SET_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_DEL_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_GET_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_KILL_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_ADD_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_SET_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_DEL_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_GET_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_KILL_PAGE_ENTRY, mtrr_ioctl32)
};
int ioctl_table_size = ARRAY_SIZE(ioctl_start);
diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c
index b2a238b..c6c9791 100644
--- a/arch/x86_64/kernel/i8259.c
+++ b/arch/x86_64/kernel/i8259.c
@@ -494,7 +494,7 @@
void thermal_interrupt(void);
void i8254_timer_resume(void);
-static void setup_timer(void)
+static void setup_timer_hardware(void)
{
outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
udelay(10);
@@ -505,13 +505,13 @@
static int timer_resume(struct sys_device *dev)
{
- setup_timer();
+ setup_timer_hardware();
return 0;
}
void i8254_timer_resume(void)
{
- setup_timer();
+ setup_timer_hardware();
}
static struct sysdev_class timer_sysclass = {
@@ -594,7 +594,7 @@
* Set the clock to HZ Hz, we already have a valid
* vector now:
*/
- setup_timer();
+ setup_timer_hardware();
if (!acpi_ioapic)
setup_irq(2, &irq2);
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index cf0a031..88be97c 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -187,7 +187,7 @@
/* Allocate DMA memory on node near device */
noinline
-static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order)
+static void *dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
{
struct page *page;
int node;
@@ -204,7 +204,7 @@
*/
void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- unsigned gfp)
+ gfp_t gfp)
{
void *memory;
unsigned long dma_mask = 0;
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index 67d90b8..5a981dc 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -24,7 +24,7 @@
*/
void *dma_alloc_coherent(struct device *hwdev, size_t size,
- dma_addr_t *dma_handle, unsigned gfp)
+ dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
u64 mask;
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index cb28df1..da0bc3e 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -1213,7 +1213,7 @@
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
- "pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est",
"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c
index f066c6a..fd2bef7 100644
--- a/arch/x86_64/kernel/suspend.c
+++ b/arch/x86_64/kernel/suspend.c
@@ -63,13 +63,12 @@
__save_processor_state(&saved_context);
}
-static void
-do_fpu_end(void)
+static void do_fpu_end(void)
{
- /* restore FPU regs if necessary */
- /* Do it out of line so that gcc does not move cr0 load to some stupid place */
- kernel_fpu_end();
- mxcsr_feature_mask_init();
+ /*
+ * Restore FPU regs if necessary
+ */
+ kernel_fpu_end();
}
void __restore_processor_state(struct saved_context *ctxt)
@@ -148,57 +147,7 @@
pgd_t *temp_level4_pgt;
-static void **pages;
-
-static inline void *__add_page(void)
-{
- void **c;
-
- c = (void **)get_usable_page(GFP_ATOMIC);
- if (c) {
- *c = pages;
- pages = c;
- }
- return c;
-}
-
-static inline void *__next_page(void)
-{
- void **c;
-
- c = pages;
- if (c) {
- pages = *c;
- *c = NULL;
- }
- return c;
-}
-
-/*
- * Try to allocate as many usable pages as needed and daisy chain them.
- * If one allocation fails, free the pages allocated so far
- */
-static int alloc_usable_pages(unsigned long n)
-{
- void *p;
-
- pages = NULL;
- do
- if (!__add_page())
- break;
- while (--n);
- if (n) {
- p = __next_page();
- while (p) {
- free_page((unsigned long)p);
- p = __next_page();
- }
- return -ENOMEM;
- }
- return 0;
-}
-
-static void res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
{
long i, j;
@@ -212,7 +161,9 @@
if (paddr >= end)
break;
- pmd = (pmd_t *)__next_page();
+ pmd = (pmd_t *)get_safe_page(GFP_ATOMIC);
+ if (!pmd)
+ return -ENOMEM;
set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
unsigned long pe;
@@ -224,13 +175,17 @@
set_pmd(pmd, __pmd(pe));
}
}
+ return 0;
}
-static void set_up_temporary_mappings(void)
+static int set_up_temporary_mappings(void)
{
unsigned long start, end, next;
+ int error;
- temp_level4_pgt = (pgd_t *)__next_page();
+ temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC);
+ if (!temp_level4_pgt)
+ return -ENOMEM;
/* It is safe to reuse the original kernel mapping */
set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
@@ -241,29 +196,27 @@
end = (unsigned long)pfn_to_kaddr(end_pfn);
for (; start < end; start = next) {
- pud_t *pud = (pud_t *)__next_page();
+ pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);
+ if (!pud)
+ return -ENOMEM;
next = start + PGDIR_SIZE;
if (next > end)
next = end;
- res_phys_pud_init(pud, __pa(start), __pa(next));
+ if ((error = res_phys_pud_init(pud, __pa(start), __pa(next))))
+ return error;
set_pgd(temp_level4_pgt + pgd_index(start),
mk_kernel_pgd(__pa(pud)));
}
+ return 0;
}
int swsusp_arch_resume(void)
{
- unsigned long n;
+ int error;
- n = ((end_pfn << PAGE_SHIFT) + PUD_SIZE - 1) >> PUD_SHIFT;
- n += (n + PTRS_PER_PUD - 1) / PTRS_PER_PUD + 1;
- pr_debug("swsusp_arch_resume(): pages needed = %lu\n", n);
- if (alloc_usable_pages(n)) {
- free_eaten_memory();
- return -ENOMEM;
- }
/* We have got enough memory and from now on we cannot recover */
- set_up_temporary_mappings();
+ if ((error = set_up_temporary_mappings()))
+ return error;
restore_image();
return 0;
}
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 703acde..fdaddc4 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -42,10 +42,6 @@
#include <asm/apic.h>
#endif
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
#ifdef CONFIG_CPU_FREQ
static void cpufreq_delayed_get(void);
#endif
@@ -481,9 +477,9 @@
static unsigned int cyc2ns_scale;
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
{
- cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+ cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
}
static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -655,7 +651,7 @@
vxtime.tsc_quot = (1000L << 32) / cpu_khz;
}
- set_cyc2ns_scale(cpu_khz_ref / 1000);
+ set_cyc2ns_scale(cpu_khz_ref);
return 0;
}
@@ -939,7 +935,7 @@
rdtscll_sync(&vxtime.last_tsc);
setup_irq(0, &irq0);
- set_cyc2ns_scale(cpu_khz / 1000);
+ set_cyc2ns_scale(cpu_khz);
#ifndef CONFIG_SMP
time_init_gtod();
@@ -1093,6 +1089,7 @@
static unsigned long PIE_count;
static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+static unsigned int hpet_t1_cmp; /* cached comparator register */
int is_hpet_enabled(void)
{
@@ -1129,10 +1126,12 @@
cnt = hpet_readl(HPET_COUNTER);
cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
hpet_writel(cnt, HPET_T1_CMP);
+ hpet_t1_cmp = cnt;
local_irq_restore(flags);
cfg = hpet_readl(HPET_T1_CFG);
- cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+ cfg &= ~HPET_TN_PERIODIC;
+ cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T1_CFG);
return 1;
@@ -1142,8 +1141,12 @@
{
unsigned int cfg, cnt;
- if (!(PIE_on | AIE_on | UIE_on))
+ if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
+ cfg = hpet_readl(HPET_T1_CFG);
+ cfg &= ~HPET_TN_ENABLE;
+ hpet_writel(cfg, HPET_T1_CFG);
return;
+ }
if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
hpet_rtc_int_freq = PIE_freq;
@@ -1151,15 +1154,10 @@
hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
/* It is more accurate to use the comparator value than current count.*/
- cnt = hpet_readl(HPET_T1_CMP);
+ cnt = hpet_t1_cmp;
cnt += hpet_tick*HZ/hpet_rtc_int_freq;
hpet_writel(cnt, HPET_T1_CMP);
-
- cfg = hpet_readl(HPET_T1_CFG);
- cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
- hpet_writel(cfg, HPET_T1_CFG);
-
- return;
+ hpet_t1_cmp = cnt;
}
/*
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c
index 6972df4..ecf7acb 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86_64/mm/ioremap.c
@@ -60,7 +60,7 @@
if (address >= end)
BUG();
do {
- pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ pte_t * pte = pte_alloc_kernel(pmd, address);
if (!pte)
return -ENOMEM;
remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -105,7 +105,6 @@
flush_cache_all();
if (address >= end)
BUG();
- spin_lock(&init_mm.page_table_lock);
do {
pud_t *pud;
pud = pud_alloc(&init_mm, pgd, address);
@@ -119,7 +118,6 @@
address = (address + PGDIR_SIZE) & PGDIR_MASK;
pgd++;
} while (address && (address < end));
- spin_unlock(&init_mm.page_table_lock);
flush_tlb_all();
return error;
}
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 84fde25..1ff8226 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -29,7 +29,7 @@
*/
void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
{
void *ret;
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index 03674da..a179307 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -18,6 +18,7 @@
#include <linux/time.h>
#include <asm/platform.h>
#include <asm/timex.h>
+#include <asm/param.h> /* HZ */
#define _F(r,f,a,b) \
r __platform_##f a b; \
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 2659efd..1446074 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -45,7 +45,7 @@
/* Nothing to do.. */
}
-int sys_ptrace(long request, long pid, long addr, long data)
+long sys_ptrace(long request, long pid, long addr, long data)
{
struct task_struct *child;
int ret = -EPERM;
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 8e423d1..cb6e38e 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -29,9 +29,6 @@
extern volatile unsigned long wall_jiffies;
-u64 jiffies_64 = INITIAL_JIFFIES;
-EXPORT_SYMBOL(jiffies_64);
-
spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED;
EXPORT_SYMBOL(rtc_lock);
diff --git a/crypto/api.c b/crypto/api.c
index 959c4e5..40ae42e 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -215,7 +215,10 @@
if (alg->cra_alignmask & (alg->cra_alignmask + 1))
return -EINVAL;
- if (alg->cra_alignmask > PAGE_SIZE)
+ if (alg->cra_alignmask & alg->cra_blocksize)
+ return -EINVAL;
+
+ if (alg->cra_blocksize > PAGE_SIZE)
return -EINVAL;
down_write(&crypto_alg_sem);
diff --git a/crypto/hmac.c b/crypto/hmac.c
index da0456b..46120de 100644
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -18,18 +18,15 @@
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/slab.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include "internal.h"
static void hash_key(struct crypto_tfm *tfm, u8 *key, unsigned int keylen)
{
struct scatterlist tmp;
- tmp.page = virt_to_page(key);
- tmp.offset = offset_in_page(key);
- tmp.length = keylen;
+ sg_set_buf(&tmp, key, keylen);
crypto_digest_digest(tfm, &tmp, 1, key);
-
}
int crypto_alloc_hmac_block(struct crypto_tfm *tfm)
@@ -69,9 +66,7 @@
for (i = 0; i < crypto_tfm_alg_blocksize(tfm); i++)
ipad[i] ^= 0x36;
- tmp.page = virt_to_page(ipad);
- tmp.offset = offset_in_page(ipad);
- tmp.length = crypto_tfm_alg_blocksize(tfm);
+ sg_set_buf(&tmp, ipad, crypto_tfm_alg_blocksize(tfm));
crypto_digest_init(tfm);
crypto_digest_update(tfm, &tmp, 1);
@@ -103,16 +98,12 @@
for (i = 0; i < crypto_tfm_alg_blocksize(tfm); i++)
opad[i] ^= 0x5c;
- tmp.page = virt_to_page(opad);
- tmp.offset = offset_in_page(opad);
- tmp.length = crypto_tfm_alg_blocksize(tfm);
+ sg_set_buf(&tmp, opad, crypto_tfm_alg_blocksize(tfm));
crypto_digest_init(tfm);
crypto_digest_update(tfm, &tmp, 1);
- tmp.page = virt_to_page(out);
- tmp.offset = offset_in_page(out);
- tmp.length = crypto_tfm_alg_digestsize(tfm);
+ sg_set_buf(&tmp, out, crypto_tfm_alg_digestsize(tfm));
crypto_digest_update(tfm, &tmp, 1);
crypto_digest_final(tfm, out);
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 6863941..53f4ee8 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -21,7 +21,7 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/string.h>
#include <linux/crypto.h>
#include <linux/highmem.h>
@@ -86,7 +86,6 @@
static void test_hash(char *algo, struct hash_testvec *template,
unsigned int tcount)
{
- char *p;
unsigned int i, j, k, temp;
struct scatterlist sg[8];
char result[64];
@@ -116,10 +115,7 @@
printk("test %u:\n", i + 1);
memset(result, 0, 64);
- p = hash_tv[i].plaintext;
- sg[0].page = virt_to_page(p);
- sg[0].offset = offset_in_page(p);
- sg[0].length = hash_tv[i].psize;
+ sg_set_buf(&sg[0], hash_tv[i].plaintext, hash_tv[i].psize);
crypto_digest_init(tfm);
if (tfm->crt_u.digest.dit_setkey) {
@@ -154,10 +150,8 @@
hash_tv[i].plaintext + temp,
hash_tv[i].tap[k]);
temp += hash_tv[i].tap[k];
- p = &xbuf[IDX[k]];
- sg[k].page = virt_to_page(p);
- sg[k].offset = offset_in_page(p);
- sg[k].length = hash_tv[i].tap[k];
+ sg_set_buf(&sg[k], &xbuf[IDX[k]],
+ hash_tv[i].tap[k]);
}
crypto_digest_digest(tfm, sg, hash_tv[i].np, result);
@@ -179,7 +173,6 @@
static void test_hmac(char *algo, struct hmac_testvec *template,
unsigned int tcount)
{
- char *p;
unsigned int i, j, k, temp;
struct scatterlist sg[8];
char result[64];
@@ -210,11 +203,8 @@
printk("test %u:\n", i + 1);
memset(result, 0, sizeof (result));
- p = hmac_tv[i].plaintext;
klen = hmac_tv[i].ksize;
- sg[0].page = virt_to_page(p);
- sg[0].offset = offset_in_page(p);
- sg[0].length = hmac_tv[i].psize;
+ sg_set_buf(&sg[0], hmac_tv[i].plaintext, hmac_tv[i].psize);
crypto_hmac(tfm, hmac_tv[i].key, &klen, sg, 1, result);
@@ -243,10 +233,8 @@
hmac_tv[i].plaintext + temp,
hmac_tv[i].tap[k]);
temp += hmac_tv[i].tap[k];
- p = &xbuf[IDX[k]];
- sg[k].page = virt_to_page(p);
- sg[k].offset = offset_in_page(p);
- sg[k].length = hmac_tv[i].tap[k];
+ sg_set_buf(&sg[k], &xbuf[IDX[k]],
+ hmac_tv[i].tap[k]);
}
crypto_hmac(tfm, hmac_tv[i].key, &klen, sg,
@@ -270,7 +258,7 @@
{
unsigned int ret, i, j, k, temp;
unsigned int tsize;
- char *p, *q;
+ char *q;
struct crypto_tfm *tfm;
char *key;
struct cipher_testvec *cipher_tv;
@@ -330,10 +318,8 @@
goto out;
}
- p = cipher_tv[i].input;
- sg[0].page = virt_to_page(p);
- sg[0].offset = offset_in_page(p);
- sg[0].length = cipher_tv[i].ilen;
+ sg_set_buf(&sg[0], cipher_tv[i].input,
+ cipher_tv[i].ilen);
if (!mode) {
crypto_cipher_set_iv(tfm, cipher_tv[i].iv,
@@ -389,10 +375,8 @@
cipher_tv[i].input + temp,
cipher_tv[i].tap[k]);
temp += cipher_tv[i].tap[k];
- p = &xbuf[IDX[k]];
- sg[k].page = virt_to_page(p);
- sg[k].offset = offset_in_page(p);
- sg[k].length = cipher_tv[i].tap[k];
+ sg_set_buf(&sg[k], &xbuf[IDX[k]],
+ cipher_tv[i].tap[k]);
}
if (!mode) {
@@ -431,14 +415,12 @@
static int test_cipher_jiffies(struct crypto_tfm *tfm, int enc, char *p,
int blen, int sec)
{
- struct scatterlist sg[8];
+ struct scatterlist sg[1];
unsigned long start, end;
int bcount;
int ret;
- sg[0].page = virt_to_page(p);
- sg[0].offset = offset_in_page(p);
- sg[0].length = blen;
+ sg_set_buf(sg, p, blen);
for (start = jiffies, end = start + sec * HZ, bcount = 0;
time_before(jiffies, end); bcount++) {
@@ -459,14 +441,12 @@
static int test_cipher_cycles(struct crypto_tfm *tfm, int enc, char *p,
int blen)
{
- struct scatterlist sg[8];
+ struct scatterlist sg[1];
unsigned long cycles = 0;
int ret = 0;
int i;
- sg[0].page = virt_to_page(p);
- sg[0].offset = offset_in_page(p);
- sg[0].length = blen;
+ sg_set_buf(sg, p, blen);
local_bh_disable();
local_irq_disable();
@@ -709,9 +689,7 @@
for (i = 0; i < NUMVEC; i++) {
for (j = 0; j < VECSIZE; j++)
test_vec[i][j] = ++b;
- sg[i].page = virt_to_page(test_vec[i]);
- sg[i].offset = offset_in_page(test_vec[i]);
- sg[i].length = VECSIZE;
+ sg_set_buf(&sg[i], test_vec[i], VECSIZE);
}
seed = SEEDTESTVAL;
diff --git a/drivers/Makefile b/drivers/Makefile
index 1a109a6..65670be 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,7 +5,7 @@
# Rewritten to use lists instead of if-statements.
#
-obj-$(CONFIG_PCI) += pci/
+obj-$(CONFIG_PCI) += pci/ usb/
obj-$(CONFIG_PARISC) += parisc/
obj-y += video/
obj-$(CONFIG_ACPI) += acpi/
diff --git a/drivers/acorn/char/pcf8583.c b/drivers/acorn/char/pcf8583.c
index 2b850e5..e26f007 100644
--- a/drivers/acorn/char/pcf8583.c
+++ b/drivers/acorn/char/pcf8583.c
@@ -9,6 +9,7 @@
*
* Driver for PCF8583 RTC & RAM chip
*/
+#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -32,7 +33,8 @@
.forces = forces,
};
-#define DAT(x) ((unsigned int)(x->dev.driver_data))
+#define set_ctrl(x, v) i2c_set_clientdata(x, (void *)(unsigned int)(v))
+#define get_ctrl(x) ((unsigned int)i2c_get_clientdata(x))
static int
pcf8583_attach(struct i2c_adapter *adap, int addr, int kind)
@@ -40,8 +42,17 @@
struct i2c_client *c;
unsigned char buf[1], ad[1] = { 0 };
struct i2c_msg msgs[2] = {
- { addr, 0, 1, ad },
- { addr, I2C_M_RD, 1, buf }
+ {
+ .addr = addr,
+ .flags = 0,
+ .len = 1,
+ .buf = ad,
+ }, {
+ .addr = addr,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = buf,
+ }
};
c = kmalloc(sizeof(*c), GFP_KERNEL);
@@ -54,7 +65,7 @@
c->driver = &pcf8583_driver;
if (i2c_transfer(c->adapter, msgs, 2) == 2)
- DAT(c) = buf[0];
+ set_ctrl(c, buf[0]);
return i2c_attach_client(c);
}
@@ -78,8 +89,17 @@
{
unsigned char buf[8], addr[1] = { 1 };
struct i2c_msg msgs[2] = {
- { client->addr, 0, 1, addr },
- { client->addr, I2C_M_RD, 6, buf }
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = addr,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = 6,
+ .buf = buf,
+ }
};
int ret = -EIO;
@@ -113,7 +133,7 @@
int ret, len = 6;
buf[0] = 0;
- buf[1] = DAT(client) | 0x80;
+ buf[1] = get_ctrl(client) | 0x80;
buf[2] = BIN_TO_BCD(dt->cs);
buf[3] = BIN_TO_BCD(dt->secs);
buf[4] = BIN_TO_BCD(dt->mins);
@@ -129,7 +149,7 @@
if (ret == len)
ret = 0;
- buf[1] = DAT(client);
+ buf[1] = get_ctrl(client);
i2c_master_send(client, (char *)buf, 2);
return ret;
@@ -138,7 +158,7 @@
static int
pcf8583_get_ctrl(struct i2c_client *client, unsigned char *ctrl)
{
- *ctrl = DAT(client);
+ *ctrl = get_ctrl(client);
return 0;
}
@@ -149,7 +169,7 @@
buf[0] = 0;
buf[1] = *ctrl;
- DAT(client) = *ctrl;
+ set_ctrl(client, *ctrl);
return i2c_master_send(client, (char *)buf, 2);
}
@@ -159,15 +179,23 @@
{
unsigned char addr[1];
struct i2c_msg msgs[2] = {
- { client->addr, 0, 1, addr },
- { client->addr, I2C_M_RD, 0, mem->data }
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = addr,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = mem->nr,
+ .buf = mem->data,
+ }
};
if (mem->loc < 8)
return -EINVAL;
addr[0] = mem->loc;
- msgs[1].len = mem->nr;
return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
}
@@ -177,15 +205,23 @@
{
unsigned char addr[1];
struct i2c_msg msgs[2] = {
- { client->addr, 0, 1, addr },
- { client->addr, 0, 0, mem->data }
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = addr,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_NOSTART,
+ .len = mem->nr,
+ .buf = mem->data,
+ }
};
if (mem->loc < 8)
return -EINVAL;
addr[0] = mem->loc;
- msgs[1].len = mem->nr;
return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
}
@@ -234,4 +270,14 @@
return i2c_add_driver(&pcf8583_driver);
}
-__initcall(pcf8583_init);
+static __exit void pcf8583_exit(void)
+{
+ i2c_del_driver(&pcf8583_driver);
+}
+
+module_init(pcf8583_init);
+module_exit(pcf8583_exit);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("PCF8583 I2C RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 01a1bd2..2143609 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -200,8 +200,7 @@
* Note: Assume that this function returns zero on success
*/
result = add_memory(mem_device->start_addr,
- (mem_device->end_addr - mem_device->start_addr) + 1,
- mem_device->read_write_attribute);
+ (mem_device->end_addr - mem_device->start_addr) + 1);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "\nadd_memory failed\n"));
mem_device->state = MEMORY_INVALID_STATE;
@@ -259,7 +258,7 @@
* Ask the VM to offline this memory range.
* Note: Assume that this function returns zero on success
*/
- result = remove_memory(start, len, attr);
+ result = remove_memory(start, len);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Hot-Remove failed.\n"));
return_VALUE(result);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 26a3a40..161db4a 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -37,6 +37,7 @@
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/moduleparam.h>
+#include <linux/sched.h> /* need_resched() */
#include <asm/io.h>
#include <asm/uaccess.h>
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index aee50b4..930427f 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -158,7 +158,15 @@
return -EINVAL;
}
+static int acpi_pm_state_valid(suspend_state_t pm_state)
+{
+ u32 acpi_state = acpi_suspend_states[pm_state];
+
+ return sleep_states[acpi_state];
+}
+
static struct pm_ops acpi_pm_ops = {
+ .valid = acpi_pm_state_valid,
.prepare = acpi_pm_prepare,
.enter = acpi_pm_enter,
.finish = acpi_pm_finish,
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 66d9c46..f12898d 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -7,6 +7,7 @@
obj-y += power/
obj-$(CONFIG_FW_LOADER) += firmware_class.o
obj-$(CONFIG_NUMA) += node.o
+obj-$(CONFIG_MEMORY_HOTPLUG) += memory.o
ifeq ($(CONFIG_DEBUG_DRIVER),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c
index 6b2eb6f..2a7d7ae 100644
--- a/drivers/base/attribute_container.c
+++ b/drivers/base/attribute_container.c
@@ -19,6 +19,8 @@
#include <linux/list.h>
#include <linux/module.h>
+#include "base.h"
+
/* This is a private structure used to tie the classdev and the
* container .. it should never be visible outside this file */
struct internal_container {
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 783752b..e3b548d 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -1,3 +1,15 @@
+
+/* initialisation functions */
+
+extern int devices_init(void);
+extern int buses_init(void);
+extern int classes_init(void);
+extern int firmware_init(void);
+extern int platform_bus_init(void);
+extern int system_bus_init(void);
+extern int cpu_dev_init(void);
+extern int attribute_container_init(void);
+
extern int bus_add_device(struct device * dev);
extern void bus_remove_device(struct device * dev);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index ce23dc8..db65fd0 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -17,6 +17,7 @@
#include <linux/string.h>
#include <linux/kdev_t.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include "base.h"
#define to_class_attr(_attr) container_of(_attr, struct class_attribute, attr)
@@ -99,7 +100,8 @@
void class_put(struct class * cls)
{
- subsys_put(&cls->subsys);
+ if (cls)
+ subsys_put(&cls->subsys);
}
@@ -165,14 +167,25 @@
static void class_create_release(struct class *cls)
{
+ pr_debug("%s called for %s\n", __FUNCTION__, cls->name);
kfree(cls);
}
static void class_device_create_release(struct class_device *class_dev)
{
+ pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id);
kfree(class_dev);
}
+/* needed to allow these devices to have parent class devices */
+static int class_device_create_hotplug(struct class_device *class_dev,
+ char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id);
+ return 0;
+}
+
/**
* class_create - create a struct class structure
* @owner: pointer to the module that is to "own" this struct class
@@ -301,10 +314,12 @@
kfree(cd->devt_attr);
cd->devt_attr = NULL;
- if (cls->release)
+ if (cd->release)
+ cd->release(cd);
+ else if (cls->release)
cls->release(cd);
else {
- printk(KERN_ERR "Device class '%s' does not have a release() function, "
+ printk(KERN_ERR "Class Device '%s' does not have a release() function, "
"it is broken and must be fixed.\n",
cd->class_id);
WARN_ON(1);
@@ -382,14 +397,18 @@
buffer = &buffer[length];
buffer_size -= length;
- if (class_dev->class->hotplug) {
- /* have the bus specific function add its stuff */
- retval = class_dev->class->hotplug (class_dev, envp, num_envp,
- buffer, buffer_size);
- if (retval) {
- pr_debug ("%s - hotplug() returned %d\n",
- __FUNCTION__, retval);
- }
+ if (class_dev->hotplug) {
+ /* have the class device specific function add its stuff */
+ retval = class_dev->hotplug(class_dev, envp, num_envp,
+ buffer, buffer_size);
+ if (retval)
+ pr_debug("class_dev->hotplug() returned %d\n", retval);
+ } else if (class_dev->class->hotplug) {
+ /* have the class specific function add its stuff */
+ retval = class_dev->class->hotplug(class_dev, envp, num_envp,
+ buffer, buffer_size);
+ if (retval)
+ pr_debug("class->hotplug() returned %d\n", retval);
}
return retval;
@@ -442,6 +461,13 @@
return print_dev_t(buf, class_dev->devt);
}
+static ssize_t store_uevent(struct class_device *class_dev,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
+ return count;
+}
+
void class_device_initialize(struct class_device *class_dev)
{
kobj_set_kset_s(class_dev, class_obj_subsys);
@@ -469,34 +495,45 @@
int class_device_add(struct class_device *class_dev)
{
- struct class * parent = NULL;
- struct class_interface * class_intf;
+ struct class *parent_class = NULL;
+ struct class_device *parent_class_dev = NULL;
+ struct class_interface *class_intf;
char *class_name = NULL;
- int error;
+ int error = -EINVAL;
class_dev = class_device_get(class_dev);
if (!class_dev)
return -EINVAL;
- if (!strlen(class_dev->class_id)) {
- error = -EINVAL;
+ if (!strlen(class_dev->class_id))
goto register_done;
- }
- parent = class_get(class_dev->class);
+ parent_class = class_get(class_dev->class);
+ if (!parent_class)
+ goto register_done;
+ parent_class_dev = class_device_get(class_dev->parent);
pr_debug("CLASS: registering class device: ID = '%s'\n",
class_dev->class_id);
/* first, register with generic layer. */
kobject_set_name(&class_dev->kobj, "%s", class_dev->class_id);
- if (parent)
- class_dev->kobj.parent = &parent->subsys.kset.kobj;
+ if (parent_class_dev)
+ class_dev->kobj.parent = &parent_class_dev->kobj;
+ else
+ class_dev->kobj.parent = &parent_class->subsys.kset.kobj;
- if ((error = kobject_add(&class_dev->kobj)))
+ error = kobject_add(&class_dev->kobj);
+ if (error)
goto register_done;
/* add the needed attributes to this device */
+ class_dev->uevent_attr.attr.name = "uevent";
+ class_dev->uevent_attr.attr.mode = S_IWUSR;
+ class_dev->uevent_attr.attr.owner = parent_class->owner;
+ class_dev->uevent_attr.store = store_uevent;
+ class_device_create_file(class_dev, &class_dev->uevent_attr);
+
if (MAJOR(class_dev->devt)) {
struct class_device_attribute *attr;
attr = kzalloc(sizeof(*attr), GFP_KERNEL);
@@ -505,12 +542,10 @@
kobject_del(&class_dev->kobj);
goto register_done;
}
-
attr->attr.name = "dev";
attr->attr.mode = S_IRUGO;
- attr->attr.owner = parent->owner;
+ attr->attr.owner = parent_class->owner;
attr->show = show_dev;
- attr->store = NULL;
class_device_create_file(class_dev, attr);
class_dev->devt_attr = attr;
}
@@ -524,20 +559,23 @@
class_name);
}
- /* notify any interfaces this device is now here */
- if (parent) {
- down(&parent->sem);
- list_add_tail(&class_dev->node, &parent->children);
- list_for_each_entry(class_intf, &parent->interfaces, node)
- if (class_intf->add)
- class_intf->add(class_dev);
- up(&parent->sem);
- }
kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
+ /* notify any interfaces this device is now here */
+ if (parent_class) {
+ down(&parent_class->sem);
+ list_add_tail(&class_dev->node, &parent_class->children);
+ list_for_each_entry(class_intf, &parent_class->interfaces, node)
+ if (class_intf->add)
+ class_intf->add(class_dev, class_intf);
+ up(&parent_class->sem);
+ }
+
register_done:
- if (error && parent)
- class_put(parent);
+ if (error) {
+ class_put(parent_class);
+ class_device_put(parent_class_dev);
+ }
class_device_put(class_dev);
kfree(class_name);
return error;
@@ -552,21 +590,28 @@
/**
* class_device_create - creates a class device and registers it with sysfs
* @cs: pointer to the struct class that this device should be registered to.
+ * @parent: pointer to the parent struct class_device of this new device, if any.
* @dev: the dev_t for the char device to be added.
* @device: a pointer to a struct device that is assiociated with this class device.
* @fmt: string for the class device's name
*
* This function can be used by char device classes. A struct
* class_device will be created in sysfs, registered to the specified
- * class. A "dev" file will be created, showing the dev_t for the
- * device. The pointer to the struct class_device will be returned from
- * the call. Any further sysfs files that might be required can be
- * created using this pointer.
+ * class.
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct class_device is passed in, the newly
+ * created struct class_device will be a child of that device in sysfs.
+ * The pointer to the struct class_device will be returned from the
+ * call. Any further sysfs files that might be required can be created
+ * using this pointer.
*
* Note: the struct class passed to this function must have previously
* been created with a call to class_create().
*/
-struct class_device *class_device_create(struct class *cls, dev_t devt,
+struct class_device *class_device_create(struct class *cls,
+ struct class_device *parent,
+ dev_t devt,
struct device *device, char *fmt, ...)
{
va_list args;
@@ -585,6 +630,9 @@
class_dev->devt = devt;
class_dev->dev = device;
class_dev->class = cls;
+ class_dev->parent = parent;
+ class_dev->release = class_device_create_release;
+ class_dev->hotplug = class_device_create_hotplug;
va_start(args, fmt);
vsnprintf(class_dev->class_id, BUS_ID_SIZE, fmt, args);
@@ -602,17 +650,18 @@
void class_device_del(struct class_device *class_dev)
{
- struct class * parent = class_dev->class;
- struct class_interface * class_intf;
+ struct class *parent_class = class_dev->class;
+ struct class_device *parent_device = class_dev->parent;
+ struct class_interface *class_intf;
char *class_name = NULL;
- if (parent) {
- down(&parent->sem);
+ if (parent_class) {
+ down(&parent_class->sem);
list_del_init(&class_dev->node);
- list_for_each_entry(class_intf, &parent->interfaces, node)
+ list_for_each_entry(class_intf, &parent_class->interfaces, node)
if (class_intf->remove)
- class_intf->remove(class_dev);
- up(&parent->sem);
+ class_intf->remove(class_dev, class_intf);
+ up(&parent_class->sem);
}
if (class_dev->dev) {
@@ -620,6 +669,7 @@
sysfs_remove_link(&class_dev->kobj, "device");
sysfs_remove_link(&class_dev->dev->kobj, class_name);
}
+ class_device_remove_file(class_dev, &class_dev->uevent_attr);
if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
class_device_remove_attrs(class_dev);
@@ -627,8 +677,8 @@
kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
kobject_del(&class_dev->kobj);
- if (parent)
- class_put(parent);
+ class_device_put(parent_device);
+ class_put(parent_class);
kfree(class_name);
}
@@ -708,7 +758,8 @@
void class_device_put(struct class_device *class_dev)
{
- kobject_put(&class_dev->kobj);
+ if (class_dev)
+ kobject_put(&class_dev->kobj);
}
@@ -728,7 +779,7 @@
list_add_tail(&class_intf->node, &parent->interfaces);
if (class_intf->add) {
list_for_each_entry(class_dev, &parent->children, node)
- class_intf->add(class_dev);
+ class_intf->add(class_dev, class_intf);
}
up(&parent->sem);
@@ -747,7 +798,7 @@
list_del_init(&class_intf->node);
if (class_intf->remove) {
list_for_each_entry(class_dev, &parent->children, node)
- class_intf->remove(class_dev);
+ class_intf->remove(class_dev, class_intf);
}
up(&parent->sem);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 6ab73f5..8615b42 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -154,6 +154,13 @@
.hotplug = dev_hotplug,
};
+static ssize_t store_uevent(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&dev->kobj, KOBJ_ADD);
+ return count;
+}
+
/**
* device_subsys - structure to be registered with kobject core.
*/
@@ -225,6 +232,7 @@
klist_children_put);
INIT_LIST_HEAD(&dev->dma_pools);
init_MUTEX(&dev->sem);
+ device_init_wakeup(dev, 0);
}
/**
@@ -258,6 +266,14 @@
if ((error = kobject_add(&dev->kobj)))
goto Error;
+
+ dev->uevent_attr.attr.name = "uevent";
+ dev->uevent_attr.attr.mode = S_IWUSR;
+ if (dev->driver)
+ dev->uevent_attr.attr.owner = dev->driver->owner;
+ dev->uevent_attr.store = store_uevent;
+ device_create_file(dev, &dev->uevent_attr);
+
kobject_hotplug(&dev->kobj, KOBJ_ADD);
if ((error = device_pm_add(dev)))
goto PMError;
@@ -349,6 +365,7 @@
if (parent)
klist_del(&dev->knode_parent);
+ device_remove_file(dev, &dev->uevent_attr);
/* Notify the platform of the removal, in case they
* need to do anything...
@@ -390,11 +407,11 @@
/**
* device_for_each_child - device child iterator.
- * @dev: parent struct device.
+ * @parent: parent struct device.
* @data: data for the callback.
* @fn: function to be called for each device.
*
- * Iterate over @dev's child devices, and call @fn for each,
+ * Iterate over @parent's child devices, and call @fn for each,
* passing it @data.
*
* We check the return of @fn each time. If it returns anything
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index b79badd..a958447 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -9,12 +9,15 @@
#include <linux/topology.h>
#include <linux/device.h>
+#include "base.h"
struct sysdev_class cpu_sysdev_class = {
set_kset_name("cpu"),
};
EXPORT_SYMBOL(cpu_sysdev_class);
+static struct sys_device *cpu_sys_devices[NR_CPUS];
+
#ifdef CONFIG_HOTPLUG_CPU
int __attribute__((weak)) smp_prepare_cpu (int cpu)
{
@@ -63,6 +66,7 @@
}
void unregister_cpu(struct cpu *cpu, struct node *root)
{
+ int logical_cpu = cpu->sysdev.id;
if (root)
sysfs_remove_link(&root->sysdev.kobj,
@@ -70,7 +74,7 @@
sysdev_remove_file(&cpu->sysdev, &attr_online);
sysdev_unregister(&cpu->sysdev);
-
+ cpu_sys_devices[logical_cpu] = NULL;
return;
}
#else /* ... !CONFIG_HOTPLUG_CPU */
@@ -102,10 +106,19 @@
kobject_name(&cpu->sysdev.kobj));
if (!error && !cpu->no_control)
register_cpu_control(cpu);
+ if (!error)
+ cpu_sys_devices[num] = &cpu->sysdev;
return error;
}
-
+struct sys_device *get_cpu_sysdev(int cpu)
+{
+ if (cpu < NR_CPUS)
+ return cpu_sys_devices[cpu];
+ else
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(get_cpu_sysdev);
int __init cpu_dev_init(void)
{
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index ef3fe51..161f3a3 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -28,6 +28,7 @@
/**
* driver_for_each_device - Iterator for devices bound to a driver.
* @drv: Driver we're iterating.
+ * @start: Device to begin with
* @data: Data to pass to the callback.
* @fn: Function to call for each device.
*
@@ -57,7 +58,7 @@
/**
* driver_find_device - device iterator for locating a particular device.
- * @driver: The device's driver
+ * @drv: The device's driver
* @start: Device to begin with
* @data: Data to pass to match function
* @match: Callback function to check device
diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c
index 88ab044..cb1b98a 100644
--- a/drivers/base/firmware.c
+++ b/drivers/base/firmware.c
@@ -11,6 +11,9 @@
#include <linux/kobject.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/device.h>
+
+#include "base.h"
static decl_subsys(firmware, NULL, NULL);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 4acb2c5..98f6c02 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -62,14 +62,16 @@
}
/**
- * firmware_timeout_store:
- * Description:
+ * firmware_timeout_store - set number of seconds to wait for firmware
+ * @class: device class pointer
+ * @buf: buffer to scan for timeout value
+ * @count: number of bytes in @buf
+ *
* Sets the number of seconds to wait for the firmware. Once
- * this expires an error will be return to the driver and no
+ * this expires an error will be returned to the driver and no
* firmware will be provided.
*
- * Note: zero means 'wait for ever'
- *
+ * Note: zero means 'wait forever'.
**/
static ssize_t
firmware_timeout_store(struct class *class, const char *buf, size_t count)
@@ -123,12 +125,15 @@
}
/**
- * firmware_loading_store: - loading control file
- * Description:
+ * firmware_loading_store - set value in the 'loading' control file
+ * @class_dev: class_device pointer
+ * @buf: buffer to scan for loading control value
+ * @count: number of bytes in @buf
+ *
* The relevant values are:
*
* 1: Start a load, discarding any previous partial load.
- * 0: Conclude the load and handle the data to the driver code.
+ * 0: Conclude the load and hand the data to the driver code.
* -1: Conclude the load with an error and discard any written data.
**/
static ssize_t
@@ -201,6 +206,7 @@
up(&fw_lock);
return ret_count;
}
+
static int
fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
{
@@ -227,11 +233,13 @@
}
/**
- * firmware_data_write:
+ * firmware_data_write - write method for firmware
+ * @kobj: kobject for the class_device
+ * @buffer: buffer being written
+ * @offset: buffer offset for write in total data store area
+ * @count: buffer size
*
- * Description:
- *
- * Data written to the 'data' attribute will be later handled to
+ * Data written to the 'data' attribute will be later handed to
* the driver as a firmware image.
**/
static ssize_t
@@ -264,6 +272,7 @@
up(&fw_lock);
return retval;
}
+
static struct bin_attribute firmware_attr_data_tmpl = {
.attr = {.name = "data", .mode = 0644, .owner = THIS_MODULE},
.size = 0,
@@ -448,13 +457,16 @@
/**
* request_firmware: - request firmware to hotplug and wait for it
- * Description:
- * @firmware will be used to return a firmware image by the name
+ * @firmware_p: pointer to firmware image
+ * @name: name of firmware file
+ * @device: device for which firmware is being loaded
+ *
+ * @firmware_p will be used to return a firmware image by the name
* of @name for device @device.
*
* Should be called from user context where sleeping is allowed.
*
- * @name will be use as $FIRMWARE in the hotplug environment and
+ * @name will be used as $FIRMWARE in the hotplug environment and
* should be distinctive enough not to be confused with any other
* firmware image for this or any other device.
**/
@@ -468,6 +480,7 @@
/**
* release_firmware: - release the resource associated with a firmware image
+ * @fw: firmware resource to release
**/
void
release_firmware(const struct firmware *fw)
@@ -480,8 +493,10 @@
/**
* register_firmware: - provide a firmware image for later usage
+ * @name: name of firmware image file
+ * @data: buffer pointer for the firmware image
+ * @size: size of the data buffer area
*
- * Description:
* Make sure that @data will be available by requesting firmware @name.
*
* Note: This will not be possible until some kind of persistence
@@ -526,21 +541,19 @@
}
/**
- * request_firmware_nowait:
+ * request_firmware_nowait: asynchronous version of request_firmware
+ * @module: module requesting the firmware
+ * @hotplug: invokes hotplug event to copy the firmware image if this flag
+ * is non-zero else the firmware copy must be done manually.
+ * @name: name of firmware file
+ * @device: device for which firmware is being loaded
+ * @context: will be passed over to @cont, and
+ * @fw may be %NULL if firmware request fails.
+ * @cont: function will be called asynchronously when the firmware
+ * request is over.
*
- * Description:
* Asynchronous variant of request_firmware() for contexts where
* it is not possible to sleep.
- *
- * @hotplug invokes hotplug event to copy the firmware image if this flag
- * is non-zero else the firmware copy must be done manually.
- *
- * @cont will be called asynchronously when the firmware request is over.
- *
- * @context will be passed over to @cont.
- *
- * @fw may be %NULL if firmware request fails.
- *
**/
int
request_firmware_nowait(
diff --git a/drivers/base/init.c b/drivers/base/init.c
index a76ae5a..c648914 100644
--- a/drivers/base/init.c
+++ b/drivers/base/init.c
@@ -9,15 +9,10 @@
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/memory.h>
-extern int devices_init(void);
-extern int buses_init(void);
-extern int classes_init(void);
-extern int firmware_init(void);
-extern int platform_bus_init(void);
-extern int system_bus_init(void);
-extern int cpu_dev_init(void);
-extern int attribute_container_init(void);
+#include "base.h"
+
/**
* driver_init - initialize driver model.
*
@@ -39,5 +34,6 @@
platform_bus_init();
system_bus_init();
cpu_dev_init();
+ memory_dev_init();
attribute_container_init();
}
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
new file mode 100644
index 0000000..b7ddd65
--- /dev/null
+++ b/drivers/base/memory.c
@@ -0,0 +1,452 @@
+/*
+ * drivers/base/memory.c - basic Memory class support
+ *
+ * Written by Matt Tolentino <matthew.e.tolentino@intel.com>
+ * Dave Hansen <haveblue@us.ibm.com>
+ *
+ * This file provides the necessary infrastructure to represent
+ * a SPARSEMEM-memory-model system's physical memory in /sysfs.
+ * All arch-independent code that assumes MEMORY_HOTPLUG requires
+ * SPARSEMEM should be contained here, or in mm/memory_hotplug.c.
+ */
+
+#include <linux/sysdev.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h> /* capable() */
+#include <linux/topology.h>
+#include <linux/device.h>
+#include <linux/memory.h>
+#include <linux/kobject.h>
+#include <linux/memory_hotplug.h>
+#include <linux/mm.h>
+#include <asm/atomic.h>
+#include <asm/uaccess.h>
+
+#define MEMORY_CLASS_NAME "memory"
+
+static struct sysdev_class memory_sysdev_class = {
+ set_kset_name(MEMORY_CLASS_NAME),
+};
+EXPORT_SYMBOL(memory_sysdev_class);
+
+static char *memory_hotplug_name(struct kset *kset, struct kobject *kobj)
+{
+ return MEMORY_CLASS_NAME;
+}
+
+static int memory_hotplug(struct kset *kset, struct kobject *kobj, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ int retval = 0;
+
+ return retval;
+}
+
+static struct kset_hotplug_ops memory_hotplug_ops = {
+ .name = memory_hotplug_name,
+ .hotplug = memory_hotplug,
+};
+
+static struct notifier_block *memory_chain;
+
+static int register_memory_notifier(struct notifier_block *nb)
+{
+ return notifier_chain_register(&memory_chain, nb);
+}
+
+static void unregister_memory_notifier(struct notifier_block *nb)
+{
+ notifier_chain_unregister(&memory_chain, nb);
+}
+
+/*
+ * register_memory - Setup a sysfs device for a memory block
+ */
+static int
+register_memory(struct memory_block *memory, struct mem_section *section,
+ struct node *root)
+{
+ int error;
+
+ memory->sysdev.cls = &memory_sysdev_class;
+ memory->sysdev.id = __section_nr(section);
+
+ error = sysdev_register(&memory->sysdev);
+
+ if (root && !error)
+ error = sysfs_create_link(&root->sysdev.kobj,
+ &memory->sysdev.kobj,
+ kobject_name(&memory->sysdev.kobj));
+
+ return error;
+}
+
+static void
+unregister_memory(struct memory_block *memory, struct mem_section *section,
+ struct node *root)
+{
+ BUG_ON(memory->sysdev.cls != &memory_sysdev_class);
+ BUG_ON(memory->sysdev.id != __section_nr(section));
+
+ sysdev_unregister(&memory->sysdev);
+ if (root)
+ sysfs_remove_link(&root->sysdev.kobj,
+ kobject_name(&memory->sysdev.kobj));
+}
+
+/*
+ * use this as the physical section index that this memsection
+ * uses.
+ */
+
+static ssize_t show_mem_phys_index(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ return sprintf(buf, "%08lx\n", mem->phys_index);
+}
+
+/*
+ * online, offline, going offline, etc.
+ */
+static ssize_t show_mem_state(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ ssize_t len = 0;
+
+ /*
+ * We can probably put these states in a nice little array
+ * so that they're not open-coded
+ */
+ switch (mem->state) {
+ case MEM_ONLINE:
+ len = sprintf(buf, "online\n");
+ break;
+ case MEM_OFFLINE:
+ len = sprintf(buf, "offline\n");
+ break;
+ case MEM_GOING_OFFLINE:
+ len = sprintf(buf, "going-offline\n");
+ break;
+ default:
+ len = sprintf(buf, "ERROR-UNKNOWN-%ld\n",
+ mem->state);
+ WARN_ON(1);
+ break;
+ }
+
+ return len;
+}
+
+static inline int memory_notify(unsigned long val, void *v)
+{
+ return notifier_call_chain(&memory_chain, val, v);
+}
+
+/*
+ * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
+ * OK to have direct references to sparsemem variables in here.
+ */
+static int
+memory_block_action(struct memory_block *mem, unsigned long action)
+{
+ int i;
+ unsigned long psection;
+ unsigned long start_pfn, start_paddr;
+ struct page *first_page;
+ int ret;
+ int old_state = mem->state;
+
+ psection = mem->phys_index;
+ first_page = pfn_to_page(psection << PFN_SECTION_SHIFT);
+
+ /*
+ * The probe routines leave the pages reserved, just
+ * as the bootmem code does. Make sure they're still
+ * that way.
+ */
+ if (action == MEM_ONLINE) {
+ for (i = 0; i < PAGES_PER_SECTION; i++) {
+ if (PageReserved(first_page+i))
+ continue;
+
+ printk(KERN_WARNING "section number %ld page number %d "
+ "not reserved, was it already online? \n",
+ psection, i);
+ return -EBUSY;
+ }
+ }
+
+ switch (action) {
+ case MEM_ONLINE:
+ start_pfn = page_to_pfn(first_page);
+ ret = online_pages(start_pfn, PAGES_PER_SECTION);
+ break;
+ case MEM_OFFLINE:
+ mem->state = MEM_GOING_OFFLINE;
+ memory_notify(MEM_GOING_OFFLINE, NULL);
+ start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
+ ret = remove_memory(start_paddr,
+ PAGES_PER_SECTION << PAGE_SHIFT);
+ if (ret) {
+ mem->state = old_state;
+ break;
+ }
+ memory_notify(MEM_MAPPING_INVALID, NULL);
+ break;
+ default:
+ printk(KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
+ __FUNCTION__, mem, action, action);
+ WARN_ON(1);
+ ret = -EINVAL;
+ }
+ /*
+ * For now, only notify on successful memory operations
+ */
+ if (!ret)
+ memory_notify(action, NULL);
+
+ return ret;
+}
+
+static int memory_block_change_state(struct memory_block *mem,
+ unsigned long to_state, unsigned long from_state_req)
+{
+ int ret = 0;
+ down(&mem->state_sem);
+
+ if (mem->state != from_state_req) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = memory_block_action(mem, to_state);
+ if (!ret)
+ mem->state = to_state;
+
+out:
+ up(&mem->state_sem);
+ return ret;
+}
+
+static ssize_t
+store_mem_state(struct sys_device *dev, const char *buf, size_t count)
+{
+ struct memory_block *mem;
+ unsigned int phys_section_nr;
+ int ret = -EINVAL;
+
+ mem = container_of(dev, struct memory_block, sysdev);
+ phys_section_nr = mem->phys_index;
+
+ if (!valid_section_nr(phys_section_nr))
+ goto out;
+
+ if (!strncmp(buf, "online", min((int)count, 6)))
+ ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
+ else if(!strncmp(buf, "offline", min((int)count, 7)))
+ ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE);
+out:
+ if (ret)
+ return ret;
+ return count;
+}
+
+/*
+ * phys_device is a bad name for this. What I really want
+ * is a way to differentiate between memory ranges that
+ * are part of physical devices that constitute
+ * a complete removable unit or fru.
+ * i.e. do these ranges belong to the same physical device,
+ * s.t. if I offline all of these sections I can then
+ * remove the physical device?
+ */
+static ssize_t show_phys_device(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ return sprintf(buf, "%d\n", mem->phys_device);
+}
+
+static SYSDEV_ATTR(phys_index, 0444, show_mem_phys_index, NULL);
+static SYSDEV_ATTR(state, 0644, show_mem_state, store_mem_state);
+static SYSDEV_ATTR(phys_device, 0444, show_phys_device, NULL);
+
+#define mem_create_simple_file(mem, attr_name) \
+ sysdev_create_file(&mem->sysdev, &attr_##attr_name)
+#define mem_remove_simple_file(mem, attr_name) \
+ sysdev_remove_file(&mem->sysdev, &attr_##attr_name)
+
+/*
+ * Block size attribute stuff
+ */
+static ssize_t
+print_block_size(struct class *class, char *buf)
+{
+ return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+}
+
+static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+
+static int block_size_init(void)
+{
+ sysfs_create_file(&memory_sysdev_class.kset.kobj,
+ &class_attr_block_size_bytes.attr);
+ return 0;
+}
+
+/*
+ * Some architectures will have custom drivers to do this, and
+ * will not need to do it from userspace. The fake hot-add code
+ * as well as ppc64 will do all of their discovery in userspace
+ * and will require this interface.
+ */
+#ifdef CONFIG_ARCH_MEMORY_PROBE
+static ssize_t
+memory_probe_store(struct class *class, const char __user *buf, size_t count)
+{
+ u64 phys_addr;
+ int ret;
+
+ phys_addr = simple_strtoull(buf, NULL, 0);
+
+ ret = add_memory(phys_addr, PAGES_PER_SECTION << PAGE_SHIFT);
+
+ if (ret)
+ count = ret;
+
+ return count;
+}
+static CLASS_ATTR(probe, 0700, NULL, memory_probe_store);
+
+static int memory_probe_init(void)
+{
+ sysfs_create_file(&memory_sysdev_class.kset.kobj,
+ &class_attr_probe.attr);
+ return 0;
+}
+#else
+#define memory_probe_init(...) do {} while (0)
+#endif
+
+/*
+ * Note that phys_device is optional. It is here to allow for
+ * differentiation between which *physical* devices each
+ * section belongs to...
+ */
+
+static int add_memory_block(unsigned long node_id, struct mem_section *section,
+ unsigned long state, int phys_device)
+{
+ struct memory_block *mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+ int ret = 0;
+
+ if (!mem)
+ return -ENOMEM;
+
+ mem->phys_index = __section_nr(section);
+ mem->state = state;
+ init_MUTEX(&mem->state_sem);
+ mem->phys_device = phys_device;
+
+ ret = register_memory(mem, section, NULL);
+ if (!ret)
+ ret = mem_create_simple_file(mem, phys_index);
+ if (!ret)
+ ret = mem_create_simple_file(mem, state);
+ if (!ret)
+ ret = mem_create_simple_file(mem, phys_device);
+
+ return ret;
+}
+
+/*
+ * For now, we have a linear search to go find the appropriate
+ * memory_block corresponding to a particular phys_index. If
+ * this gets to be a real problem, we can always use a radix
+ * tree or something here.
+ *
+ * This could be made generic for all sysdev classes.
+ */
+static struct memory_block *find_memory_block(struct mem_section *section)
+{
+ struct kobject *kobj;
+ struct sys_device *sysdev;
+ struct memory_block *mem;
+ char name[sizeof(MEMORY_CLASS_NAME) + 9 + 1];
+
+ /*
+ * This only works because we know that section == sysdev->id
+ * slightly redundant with sysdev_register()
+ */
+ sprintf(&name[0], "%s%d", MEMORY_CLASS_NAME, __section_nr(section));
+
+ kobj = kset_find_obj(&memory_sysdev_class.kset, name);
+ if (!kobj)
+ return NULL;
+
+ sysdev = container_of(kobj, struct sys_device, kobj);
+ mem = container_of(sysdev, struct memory_block, sysdev);
+
+ return mem;
+}
+
+int remove_memory_block(unsigned long node_id, struct mem_section *section,
+ int phys_device)
+{
+ struct memory_block *mem;
+
+ mem = find_memory_block(section);
+ mem_remove_simple_file(mem, phys_index);
+ mem_remove_simple_file(mem, state);
+ mem_remove_simple_file(mem, phys_device);
+ unregister_memory(mem, section, NULL);
+
+ return 0;
+}
+
+/*
+ * need an interface for the VM to add new memory regions,
+ * but without onlining it.
+ */
+int register_new_memory(struct mem_section *section)
+{
+ return add_memory_block(0, section, MEM_OFFLINE, 0);
+}
+
+int unregister_memory_section(struct mem_section *section)
+{
+ if (!valid_section(section))
+ return -EINVAL;
+
+ return remove_memory_block(0, section, 0);
+}
+
+/*
+ * Initialize the sysfs support for memory devices...
+ */
+int __init memory_dev_init(void)
+{
+ unsigned int i;
+ int ret;
+
+ memory_sysdev_class.kset.hotplug_ops = &memory_hotplug_ops;
+ ret = sysdev_class_register(&memory_sysdev_class);
+
+ /*
+ * Create entries for memory sections that were found
+ * during boot and have been initialized
+ */
+ for (i = 0; i < NR_MEM_SECTIONS; i++) {
+ if (!valid_section_nr(i))
+ continue;
+ add_memory_block(0, __nr_to_section(i), MEM_ONLINE, 0);
+ }
+
+ memory_probe_init();
+ block_size_init();
+
+ return ret;
+}
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 361e204..08d9cc9 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -16,6 +16,9 @@
#include <linux/dma-mapping.h>
#include <linux/bootmem.h>
#include <linux/err.h>
+#include <linux/slab.h>
+
+#include "base.h"
struct device platform_bus = {
.bus_id = "platform",
@@ -279,13 +282,9 @@
{
int ret = 0;
- if (dev->driver && dev->driver->suspend) {
- ret = dev->driver->suspend(dev, state, SUSPEND_DISABLE);
- if (ret == 0)
- ret = dev->driver->suspend(dev, state, SUSPEND_SAVE_STATE);
- if (ret == 0)
- ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN);
- }
+ if (dev->driver && dev->driver->suspend)
+ ret = dev->driver->suspend(dev, state);
+
return ret;
}
@@ -293,13 +292,9 @@
{
int ret = 0;
- if (dev->driver && dev->driver->resume) {
- ret = dev->driver->resume(dev, RESUME_POWER_ON);
- if (ret == 0)
- ret = dev->driver->resume(dev, RESUME_RESTORE_STATE);
- if (ret == 0)
- ret = dev->driver->resume(dev, RESUME_ENABLE);
- }
+ if (dev->driver && dev->driver->resume)
+ ret = dev->driver->resume(dev);
+
return ret;
}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 15e6a8f..0d2e101 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -30,23 +30,6 @@
DECLARE_MUTEX(dpm_sem);
DECLARE_MUTEX(dpm_list_sem);
-/*
- * PM Reference Counting.
- */
-
-static inline void device_pm_hold(struct device * dev)
-{
- if (dev)
- atomic_inc(&dev->power.pm_users);
-}
-
-static inline void device_pm_release(struct device * dev)
-{
- if (dev)
- atomic_dec(&dev->power.pm_users);
-}
-
-
/**
* device_pm_set_parent - Specify power dependency.
* @dev: Device who needs power.
@@ -62,10 +45,8 @@
void device_pm_set_parent(struct device * dev, struct device * parent)
{
- struct device * old_parent = dev->power.pm_parent;
- device_pm_release(old_parent);
- dev->power.pm_parent = parent;
- device_pm_hold(parent);
+ put_device(dev->power.pm_parent);
+ dev->power.pm_parent = get_device(parent);
}
EXPORT_SYMBOL_GPL(device_pm_set_parent);
@@ -75,7 +56,6 @@
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus", dev->kobj.name);
- atomic_set(&dev->power.pm_users, 0);
down(&dpm_list_sem);
list_add_tail(&dev->power.entry, &dpm_active);
device_pm_set_parent(dev, dev->parent);
@@ -91,7 +71,7 @@
dev->bus ? dev->bus->name : "No Bus", dev->kobj.name);
down(&dpm_list_sem);
dpm_sysfs_remove(dev);
- device_pm_release(dev->power.pm_parent);
+ put_device(dev->power.pm_parent);
list_del_init(&dev->power.entry);
up(&dpm_list_sem);
}
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index 2e700d7..fb3d35a 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -67,9 +67,6 @@
* runtime.c
*/
-extern int dpm_runtime_suspend(struct device *, pm_message_t);
-extern void dpm_runtime_resume(struct device *);
-
#else /* CONFIG_PM */
@@ -82,14 +79,4 @@
}
-static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state)
-{
- return 0;
-}
-
-static inline void dpm_runtime_resume(struct device * dev)
-{
-
-}
-
#endif
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index e8f0519..adbc314 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -36,6 +36,7 @@
runtime_resume(dev);
up(&dpm_sem);
}
+EXPORT_SYMBOL(dpm_runtime_resume);
/**
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 8d04fb4..89c5787 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -48,8 +48,81 @@
static DEVICE_ATTR(state, 0644, state_show, state_store);
+/*
+ * wakeup - Report/change current wakeup option for device
+ *
+ * Some devices support "wakeup" events, which are hardware signals
+ * used to activate devices from suspended or low power states. Such
+ * devices have one of three values for the sysfs power/wakeup file:
+ *
+ * + "enabled\n" to issue the events;
+ * + "disabled\n" not to do so; or
+ * + "\n" for temporary or permanent inability to issue wakeup.
+ *
+ * (For example, unconfigured USB devices can't issue wakeups.)
+ *
+ * Familiar examples of devices that can issue wakeup events include
+ * keyboards and mice (both PS2 and USB styles), power buttons, modems,
+ * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events
+ * will wake the entire system from a suspend state; others may just
+ * wake up the device (if the system as a whole is already active).
+ * Some wakeup events use normal IRQ lines; other use special out
+ * of band signaling.
+ *
+ * It is the responsibility of device drivers to enable (or disable)
+ * wakeup signaling as part of changing device power states, respecting
+ * the policy choices provided through the driver model.
+ *
+ * Devices may not be able to generate wakeup events from all power
+ * states. Also, the events may be ignored in some configurations;
+ * for example, they might need help from other devices that aren't
+ * active, or which may have wakeup disabled. Some drivers rely on
+ * wakeup events internally (unless they are disabled), keeping
+ * their hardware in low power modes whenever they're unused. This
+ * saves runtime power, without requiring system-wide sleep states.
+ */
+
+static const char enabled[] = "enabled";
+static const char disabled[] = "disabled";
+
+static ssize_t
+wake_show(struct device * dev, struct device_attribute *attr, char * buf)
+{
+ return sprintf(buf, "%s\n", device_can_wakeup(dev)
+ ? (device_may_wakeup(dev) ? enabled : disabled)
+ : "");
+}
+
+static ssize_t
+wake_store(struct device * dev, struct device_attribute *attr,
+ const char * buf, size_t n)
+{
+ char *cp;
+ int len = n;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ cp = memchr(buf, '\n', n);
+ if (cp)
+ len = cp - buf;
+ if (len == sizeof enabled - 1
+ && strncmp(buf, enabled, sizeof enabled - 1) == 0)
+ device_set_wakeup_enable(dev, 1);
+ else if (len == sizeof disabled - 1
+ && strncmp(buf, disabled, sizeof disabled - 1) == 0)
+ device_set_wakeup_enable(dev, 0);
+ else
+ return -EINVAL;
+ return n;
+}
+
+static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
+
+
static struct attribute * power_attrs[] = {
&dev_attr_state.attr,
+ &dev_attr_wakeup.attr,
NULL,
};
static struct attribute_group pm_attr_group = {
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 3431eb6..66ed8f2 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -21,6 +21,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/pm.h>
+#include <asm/semaphore.h>
extern struct subsystem devices_subsys;
diff --git a/drivers/block/Kconfig.iosched b/drivers/block/Kconfig.iosched
index 6070a48..5b90d2f 100644
--- a/drivers/block/Kconfig.iosched
+++ b/drivers/block/Kconfig.iosched
@@ -38,4 +38,32 @@
among all processes in the system. It should provide a fair
working environment, suitable for desktop systems.
+choice
+ prompt "Default I/O scheduler"
+ default DEFAULT_AS
+ help
+ Select the I/O scheduler which will be used by default for all
+ block devices.
+
+ config DEFAULT_AS
+ bool "Anticipatory" if IOSCHED_AS
+
+ config DEFAULT_DEADLINE
+ bool "Deadline" if IOSCHED_DEADLINE
+
+ config DEFAULT_CFQ
+ bool "CFQ" if IOSCHED_CFQ
+
+ config DEFAULT_NOOP
+ bool "No-op"
+
+endchoice
+
+config DEFAULT_IOSCHED
+ string
+ default "anticipatory" if DEFAULT_AS
+ default "deadline" if DEFAULT_DEADLINE
+ default "cfq" if DEFAULT_CFQ
+ default "noop" if DEFAULT_NOOP
+
endmenu
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index 0e9e586..881c48d 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -1,5 +1,5 @@
/* Copyright (c) 2004 Coraid, Inc. See COPYING for GPL terms. */
-#define VERSION "12"
+#define VERSION "14"
#define AOE_MAJOR 152
#define DEVICE_NAME "aoe"
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index 45a2430..41ae0ed 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -224,7 +224,7 @@
return PTR_ERR(aoe_class);
}
for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
- class_device_create(aoe_class,
+ class_device_create(aoe_class, NULL,
MKDEV(AOE_MAJOR, chardevs[i].minor),
NULL, chardevs[i].name);
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index b5be4b7..5c9c7c1 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -8,6 +8,7 @@
#include <linux/blkdev.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
+#include <asm/unaligned.h>
#include "aoe.h"
#define TIMERTICK (HZ / 10)
@@ -311,16 +312,16 @@
u16 n;
/* word 83: command set supported */
- n = le16_to_cpup((__le16 *) &id[83<<1]);
+ n = le16_to_cpu(get_unaligned((__le16 *) &id[83<<1]));
/* word 86: command set/feature enabled */
- n |= le16_to_cpup((__le16 *) &id[86<<1]);
+ n |= le16_to_cpu(get_unaligned((__le16 *) &id[86<<1]));
if (n & (1<<10)) { /* bit 10: LBA 48 */
d->flags |= DEVFL_EXT;
/* word 100: number lba48 sectors */
- ssize = le64_to_cpup((__le64 *) &id[100<<1]);
+ ssize = le64_to_cpu(get_unaligned((__le64 *) &id[100<<1]));
/* set as in ide-disk.c:init_idedisk_capacity */
d->geo.cylinders = ssize;
@@ -331,12 +332,12 @@
d->flags &= ~DEVFL_EXT;
/* number lba28 sectors */
- ssize = le32_to_cpup((__le32 *) &id[60<<1]);
+ ssize = le32_to_cpu(get_unaligned((__le32 *) &id[60<<1]));
/* NOTE: obsolete in ATA 6 */
- d->geo.cylinders = le16_to_cpup((__le16 *) &id[54<<1]);
- d->geo.heads = le16_to_cpup((__le16 *) &id[55<<1]);
- d->geo.sectors = le16_to_cpup((__le16 *) &id[56<<1]);
+ d->geo.cylinders = le16_to_cpu(get_unaligned((__le16 *) &id[54<<1]));
+ d->geo.heads = le16_to_cpu(get_unaligned((__le16 *) &id[55<<1]));
+ d->geo.sectors = le16_to_cpu(get_unaligned((__le16 *) &id[56<<1]));
}
d->ssize = ssize;
d->geo.start = 0;
diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c
index 95c0a36..c6744ff 100644
--- a/drivers/block/as-iosched.c
+++ b/drivers/block/as-iosched.c
@@ -98,7 +98,6 @@
struct as_rq *next_arq[2]; /* next in sort order */
sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */
- struct list_head *dispatch; /* driver dispatch queue */
struct list_head *hash; /* request hash */
unsigned long exit_prob; /* probability a task will exit while
@@ -239,6 +238,25 @@
return ioc;
}
+static void as_put_io_context(struct as_rq *arq)
+{
+ struct as_io_context *aic;
+
+ if (unlikely(!arq->io_context))
+ return;
+
+ aic = arq->io_context->aic;
+
+ if (arq->is_sync == REQ_SYNC && aic) {
+ spin_lock(&aic->lock);
+ set_bit(AS_TASK_IORUNNING, &aic->state);
+ aic->last_end_request = jiffies;
+ spin_unlock(&aic->lock);
+ }
+
+ put_io_context(arq->io_context);
+}
+
/*
* the back merge hash support functions
*/
@@ -261,14 +279,6 @@
__as_del_arq_hash(arq);
}
-static void as_remove_merge_hints(request_queue_t *q, struct as_rq *arq)
-{
- as_del_arq_hash(arq);
-
- if (q->last_merge == arq->request)
- q->last_merge = NULL;
-}
-
static void as_add_arq_hash(struct as_data *ad, struct as_rq *arq)
{
struct request *rq = arq->request;
@@ -312,7 +322,7 @@
BUG_ON(!arq->on_hash);
if (!rq_mergeable(__rq)) {
- as_remove_merge_hints(ad->q, arq);
+ as_del_arq_hash(arq);
continue;
}
@@ -950,23 +960,12 @@
WARN_ON(!list_empty(&rq->queuelist));
- if (arq->state == AS_RQ_PRESCHED) {
- WARN_ON(arq->io_context);
- goto out;
- }
-
- if (arq->state == AS_RQ_MERGED)
- goto out_ioc;
-
if (arq->state != AS_RQ_REMOVED) {
printk("arq->state %d\n", arq->state);
WARN_ON(1);
goto out;
}
- if (!blk_fs_request(rq))
- goto out;
-
if (ad->changed_batch && ad->nr_dispatched == 1) {
kblockd_schedule_work(&ad->antic_work);
ad->changed_batch = 0;
@@ -1001,21 +1000,7 @@
}
}
-out_ioc:
- if (!arq->io_context)
- goto out;
-
- if (arq->is_sync == REQ_SYNC) {
- struct as_io_context *aic = arq->io_context->aic;
- if (aic) {
- spin_lock(&aic->lock);
- set_bit(AS_TASK_IORUNNING, &aic->state);
- aic->last_end_request = jiffies;
- spin_unlock(&aic->lock);
- }
- }
-
- put_io_context(arq->io_context);
+ as_put_io_context(arq);
out:
arq->state = AS_RQ_POSTSCHED;
}
@@ -1047,73 +1032,11 @@
ad->next_arq[data_dir] = as_find_next_arq(ad, arq);
list_del_init(&arq->fifo);
- as_remove_merge_hints(q, arq);
+ as_del_arq_hash(arq);
as_del_arq_rb(ad, arq);
}
/*
- * as_remove_dispatched_request is called to remove a request which has gone
- * to the dispatch list.
- */
-static void as_remove_dispatched_request(request_queue_t *q, struct request *rq)
-{
- struct as_rq *arq = RQ_DATA(rq);
- struct as_io_context *aic;
-
- if (!arq) {
- WARN_ON(1);
- return;
- }
-
- WARN_ON(arq->state != AS_RQ_DISPATCHED);
- WARN_ON(ON_RB(&arq->rb_node));
- if (arq->io_context && arq->io_context->aic) {
- aic = arq->io_context->aic;
- if (aic) {
- WARN_ON(!atomic_read(&aic->nr_dispatched));
- atomic_dec(&aic->nr_dispatched);
- }
- }
-}
-
-/*
- * as_remove_request is called when a driver has finished with a request.
- * This should be only called for dispatched requests, but for some reason
- * a POWER4 box running hwscan it does not.
- */
-static void as_remove_request(request_queue_t *q, struct request *rq)
-{
- struct as_rq *arq = RQ_DATA(rq);
-
- if (unlikely(arq->state == AS_RQ_NEW))
- goto out;
-
- if (ON_RB(&arq->rb_node)) {
- if (arq->state != AS_RQ_QUEUED) {
- printk("arq->state %d\n", arq->state);
- WARN_ON(1);
- goto out;
- }
- /*
- * We'll lose the aliased request(s) here. I don't think this
- * will ever happen, but if it does, hopefully someone will
- * report it.
- */
- WARN_ON(!list_empty(&rq->queuelist));
- as_remove_queued_request(q, rq);
- } else {
- if (arq->state != AS_RQ_DISPATCHED) {
- printk("arq->state %d\n", arq->state);
- WARN_ON(1);
- goto out;
- }
- as_remove_dispatched_request(q, rq);
- }
-out:
- arq->state = AS_RQ_REMOVED;
-}
-
-/*
* as_fifo_expired returns 0 if there are no expired reads on the fifo,
* 1 otherwise. It is ratelimited so that we only perform the check once per
* `fifo_expire' interval. Otherwise a large number of expired requests
@@ -1165,7 +1088,6 @@
static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq)
{
struct request *rq = arq->request;
- struct list_head *insert;
const int data_dir = arq->is_sync;
BUG_ON(!ON_RB(&arq->rb_node));
@@ -1198,13 +1120,13 @@
/*
* take it off the sort and fifo list, add to dispatch queue
*/
- insert = ad->dispatch->prev;
-
while (!list_empty(&rq->queuelist)) {
struct request *__rq = list_entry_rq(rq->queuelist.next);
struct as_rq *__arq = RQ_DATA(__rq);
- list_move_tail(&__rq->queuelist, ad->dispatch);
+ list_del(&__rq->queuelist);
+
+ elv_dispatch_add_tail(ad->q, __rq);
if (__arq->io_context && __arq->io_context->aic)
atomic_inc(&__arq->io_context->aic->nr_dispatched);
@@ -1218,7 +1140,8 @@
as_remove_queued_request(ad->q, rq);
WARN_ON(arq->state != AS_RQ_QUEUED);
- list_add(&rq->queuelist, insert);
+ elv_dispatch_sort(ad->q, rq);
+
arq->state = AS_RQ_DISPATCHED;
if (arq->io_context && arq->io_context->aic)
atomic_inc(&arq->io_context->aic->nr_dispatched);
@@ -1230,12 +1153,42 @@
* read/write expire, batch expire, etc, and moves it to the dispatch
* queue. Returns 1 if a request was found, 0 otherwise.
*/
-static int as_dispatch_request(struct as_data *ad)
+static int as_dispatch_request(request_queue_t *q, int force)
{
+ struct as_data *ad = q->elevator->elevator_data;
struct as_rq *arq;
const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]);
const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]);
+ if (unlikely(force)) {
+ /*
+ * Forced dispatch, accounting is useless. Reset
+ * accounting states and dump fifo_lists. Note that
+ * batch_data_dir is reset to REQ_SYNC to avoid
+ * screwing write batch accounting as write batch
+ * accounting occurs on W->R transition.
+ */
+ int dispatched = 0;
+
+ ad->batch_data_dir = REQ_SYNC;
+ ad->changed_batch = 0;
+ ad->new_batch = 0;
+
+ while (ad->next_arq[REQ_SYNC]) {
+ as_move_to_dispatch(ad, ad->next_arq[REQ_SYNC]);
+ dispatched++;
+ }
+ ad->last_check_fifo[REQ_SYNC] = jiffies;
+
+ while (ad->next_arq[REQ_ASYNC]) {
+ as_move_to_dispatch(ad, ad->next_arq[REQ_ASYNC]);
+ dispatched++;
+ }
+ ad->last_check_fifo[REQ_ASYNC] = jiffies;
+
+ return dispatched;
+ }
+
/* Signal that the write batch was uncontended, so we can't time it */
if (ad->batch_data_dir == REQ_ASYNC && !reads) {
if (ad->current_write_count == 0 || !writes)
@@ -1359,20 +1312,6 @@
return 1;
}
-static struct request *as_next_request(request_queue_t *q)
-{
- struct as_data *ad = q->elevator->elevator_data;
- struct request *rq = NULL;
-
- /*
- * if there are still requests on the dispatch queue, grab the first
- */
- if (!list_empty(ad->dispatch) || as_dispatch_request(ad))
- rq = list_entry_rq(ad->dispatch->next);
-
- return rq;
-}
-
/*
* Add arq to a list behind alias
*/
@@ -1404,17 +1343,26 @@
/*
* Don't want to have to handle merges.
*/
- as_remove_merge_hints(ad->q, arq);
+ as_del_arq_hash(arq);
+ arq->request->flags |= REQ_NOMERGE;
}
/*
* add arq to rbtree and fifo
*/
-static void as_add_request(struct as_data *ad, struct as_rq *arq)
+static void as_add_request(request_queue_t *q, struct request *rq)
{
+ struct as_data *ad = q->elevator->elevator_data;
+ struct as_rq *arq = RQ_DATA(rq);
struct as_rq *alias;
int data_dir;
+ if (arq->state != AS_RQ_PRESCHED) {
+ printk("arq->state: %d\n", arq->state);
+ WARN_ON(1);
+ }
+ arq->state = AS_RQ_NEW;
+
if (rq_data_dir(arq->request) == READ
|| current->flags&PF_SYNCWRITE)
arq->is_sync = 1;
@@ -1437,12 +1385,8 @@
arq->expires = jiffies + ad->fifo_expire[data_dir];
list_add_tail(&arq->fifo, &ad->fifo_list[data_dir]);
- if (rq_mergeable(arq->request)) {
+ if (rq_mergeable(arq->request))
as_add_arq_hash(ad, arq);
-
- if (!ad->q->last_merge)
- ad->q->last_merge = arq->request;
- }
as_update_arq(ad, arq); /* keep state machine up to date */
} else {
@@ -1463,96 +1407,24 @@
arq->state = AS_RQ_QUEUED;
}
+static void as_activate_request(request_queue_t *q, struct request *rq)
+{
+ struct as_rq *arq = RQ_DATA(rq);
+
+ WARN_ON(arq->state != AS_RQ_DISPATCHED);
+ arq->state = AS_RQ_REMOVED;
+ if (arq->io_context && arq->io_context->aic)
+ atomic_dec(&arq->io_context->aic->nr_dispatched);
+}
+
static void as_deactivate_request(request_queue_t *q, struct request *rq)
{
- struct as_data *ad = q->elevator->elevator_data;
struct as_rq *arq = RQ_DATA(rq);
- if (arq) {
- if (arq->state == AS_RQ_REMOVED) {
- arq->state = AS_RQ_DISPATCHED;
- if (arq->io_context && arq->io_context->aic)
- atomic_inc(&arq->io_context->aic->nr_dispatched);
- }
- } else
- WARN_ON(blk_fs_request(rq)
- && (!(rq->flags & (REQ_HARDBARRIER|REQ_SOFTBARRIER))) );
-
- /* Stop anticipating - let this request get through */
- as_antic_stop(ad);
-}
-
-/*
- * requeue the request. The request has not been completed, nor is it a
- * new request, so don't touch accounting.
- */
-static void as_requeue_request(request_queue_t *q, struct request *rq)
-{
- as_deactivate_request(q, rq);
- list_add(&rq->queuelist, &q->queue_head);
-}
-
-/*
- * Account a request that is inserted directly onto the dispatch queue.
- * arq->io_context->aic->nr_dispatched should not need to be incremented
- * because only new requests should come through here: requeues go through
- * our explicit requeue handler.
- */
-static void as_account_queued_request(struct as_data *ad, struct request *rq)
-{
- if (blk_fs_request(rq)) {
- struct as_rq *arq = RQ_DATA(rq);
- arq->state = AS_RQ_DISPATCHED;
- ad->nr_dispatched++;
- }
-}
-
-static void
-as_insert_request(request_queue_t *q, struct request *rq, int where)
-{
- struct as_data *ad = q->elevator->elevator_data;
- struct as_rq *arq = RQ_DATA(rq);
-
- if (arq) {
- if (arq->state != AS_RQ_PRESCHED) {
- printk("arq->state: %d\n", arq->state);
- WARN_ON(1);
- }
- arq->state = AS_RQ_NEW;
- }
-
- /* barriers must flush the reorder queue */
- if (unlikely(rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)
- && where == ELEVATOR_INSERT_SORT)) {
- WARN_ON(1);
- where = ELEVATOR_INSERT_BACK;
- }
-
- switch (where) {
- case ELEVATOR_INSERT_BACK:
- while (ad->next_arq[REQ_SYNC])
- as_move_to_dispatch(ad, ad->next_arq[REQ_SYNC]);
-
- while (ad->next_arq[REQ_ASYNC])
- as_move_to_dispatch(ad, ad->next_arq[REQ_ASYNC]);
-
- list_add_tail(&rq->queuelist, ad->dispatch);
- as_account_queued_request(ad, rq);
- as_antic_stop(ad);
- break;
- case ELEVATOR_INSERT_FRONT:
- list_add(&rq->queuelist, ad->dispatch);
- as_account_queued_request(ad, rq);
- as_antic_stop(ad);
- break;
- case ELEVATOR_INSERT_SORT:
- BUG_ON(!blk_fs_request(rq));
- as_add_request(ad, arq);
- break;
- default:
- BUG();
- return;
- }
+ WARN_ON(arq->state != AS_RQ_REMOVED);
+ arq->state = AS_RQ_DISPATCHED;
+ if (arq->io_context && arq->io_context->aic)
+ atomic_inc(&arq->io_context->aic->nr_dispatched);
}
/*
@@ -1565,12 +1437,8 @@
{
struct as_data *ad = q->elevator->elevator_data;
- if (!list_empty(&ad->fifo_list[REQ_ASYNC])
- || !list_empty(&ad->fifo_list[REQ_SYNC])
- || !list_empty(ad->dispatch))
- return 0;
-
- return 1;
+ return list_empty(&ad->fifo_list[REQ_ASYNC])
+ && list_empty(&ad->fifo_list[REQ_SYNC]);
}
static struct request *
@@ -1608,15 +1476,6 @@
int ret;
/*
- * try last_merge to avoid going to hash
- */
- ret = elv_try_last_merge(q, bio);
- if (ret != ELEVATOR_NO_MERGE) {
- __rq = q->last_merge;
- goto out_insert;
- }
-
- /*
* see if the merge hash can satisfy a back merge
*/
__rq = as_find_arq_hash(ad, bio->bi_sector);
@@ -1644,9 +1503,6 @@
return ELEVATOR_NO_MERGE;
out:
- if (rq_mergeable(__rq))
- q->last_merge = __rq;
-out_insert:
if (ret) {
if (rq_mergeable(__rq))
as_hot_arq_hash(ad, RQ_DATA(__rq));
@@ -1693,9 +1549,6 @@
* behind the disk head. We currently don't bother adjusting.
*/
}
-
- if (arq->on_hash)
- q->last_merge = req;
}
static void
@@ -1763,6 +1616,7 @@
* kill knowledge of next, this one is a goner
*/
as_remove_queued_request(q, next);
+ as_put_io_context(anext);
anext->state = AS_RQ_MERGED;
}
@@ -1782,7 +1636,7 @@
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
- if (as_next_request(q))
+ if (!as_queue_empty(q))
q->request_fn(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
@@ -1797,7 +1651,9 @@
return;
}
- if (arq->state != AS_RQ_POSTSCHED && arq->state != AS_RQ_PRESCHED) {
+ if (unlikely(arq->state != AS_RQ_POSTSCHED &&
+ arq->state != AS_RQ_PRESCHED &&
+ arq->state != AS_RQ_MERGED)) {
printk("arq->state %d\n", arq->state);
WARN_ON(1);
}
@@ -1807,7 +1663,7 @@
}
static int as_set_request(request_queue_t *q, struct request *rq,
- struct bio *bio, int gfp_mask)
+ struct bio *bio, gfp_t gfp_mask)
{
struct as_data *ad = q->elevator->elevator_data;
struct as_rq *arq = mempool_alloc(ad->arq_pool, gfp_mask);
@@ -1907,7 +1763,6 @@
INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]);
ad->sort_list[REQ_SYNC] = RB_ROOT;
ad->sort_list[REQ_ASYNC] = RB_ROOT;
- ad->dispatch = &q->queue_head;
ad->fifo_expire[REQ_SYNC] = default_read_expire;
ad->fifo_expire[REQ_ASYNC] = default_write_expire;
ad->antic_expire = default_antic_expire;
@@ -2072,10 +1927,9 @@
.elevator_merge_fn = as_merge,
.elevator_merged_fn = as_merged_request,
.elevator_merge_req_fn = as_merged_requests,
- .elevator_next_req_fn = as_next_request,
- .elevator_add_req_fn = as_insert_request,
- .elevator_remove_req_fn = as_remove_request,
- .elevator_requeue_req_fn = as_requeue_request,
+ .elevator_dispatch_fn = as_dispatch_request,
+ .elevator_add_req_fn = as_add_request,
+ .elevator_activate_req_fn = as_activate_request,
.elevator_deactivate_req_fn = as_deactivate_request,
.elevator_queue_empty_fn = as_queue_empty,
.elevator_completed_req_fn = as_completed_request,
@@ -2119,8 +1973,8 @@
static void __exit as_exit(void)
{
- kmem_cache_destroy(arq_pool);
elv_unregister(&iosched_as);
+ kmem_cache_destroy(arq_pool);
}
module_init(as_init);
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e183a3e..ec27976 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -28,13 +28,17 @@
through the array controller. Note in particular, neither
physical nor logical disks are presented through the scsi layer. */
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/atomic.h>
+
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
-#include <asm/atomic.h>
-#include <linux/timer.h>
-#include <linux/completion.h>
#include "cciss_scsi.h"
diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c
index cd056e7..5281f8e 100644
--- a/drivers/block/cfq-iosched.c
+++ b/drivers/block/cfq-iosched.c
@@ -84,7 +84,6 @@
(node)->rb_left = NULL; \
} while (0)
#define RB_CLEAR_ROOT(root) ((root)->rb_node = NULL)
-#define ON_RB(node) ((node)->rb_color != RB_NONE)
#define rb_entry_crq(node) rb_entry((node), struct cfq_rq, rb_node)
#define rq_rb_key(rq) (rq)->sector
@@ -271,10 +270,7 @@
#undef CFQ_CFQQ_FNS
enum cfq_rq_state_flags {
- CFQ_CRQ_FLAG_in_flight = 0,
- CFQ_CRQ_FLAG_in_driver,
- CFQ_CRQ_FLAG_is_sync,
- CFQ_CRQ_FLAG_requeued,
+ CFQ_CRQ_FLAG_is_sync = 0,
};
#define CFQ_CRQ_FNS(name) \
@@ -291,14 +287,11 @@
return (crq->crq_flags & (1 << CFQ_CRQ_FLAG_##name)) != 0; \
}
-CFQ_CRQ_FNS(in_flight);
-CFQ_CRQ_FNS(in_driver);
CFQ_CRQ_FNS(is_sync);
-CFQ_CRQ_FNS(requeued);
#undef CFQ_CRQ_FNS
static struct cfq_queue *cfq_find_cfq_hash(struct cfq_data *, unsigned int, unsigned short);
-static void cfq_dispatch_sort(request_queue_t *, struct cfq_rq *);
+static void cfq_dispatch_insert(request_queue_t *, struct cfq_rq *);
static void cfq_put_cfqd(struct cfq_data *cfqd);
#define process_sync(tsk) ((tsk)->flags & PF_SYNCWRITE)
@@ -311,14 +304,6 @@
hlist_del_init(&crq->hash);
}
-static void cfq_remove_merge_hints(request_queue_t *q, struct cfq_rq *crq)
-{
- cfq_del_crq_hash(crq);
-
- if (q->last_merge == crq->request)
- q->last_merge = NULL;
-}
-
static inline void cfq_add_crq_hash(struct cfq_data *cfqd, struct cfq_rq *crq)
{
const int hash_idx = CFQ_MHASH_FN(rq_hash_key(crq->request));
@@ -347,18 +332,13 @@
return NULL;
}
-static inline int cfq_pending_requests(struct cfq_data *cfqd)
-{
- return !list_empty(&cfqd->queue->queue_head) || cfqd->busy_queues;
-}
-
/*
* scheduler run of queue, if there are requests pending and no one in the
* driver that will restart queueing
*/
static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
{
- if (!cfqd->rq_in_driver && cfq_pending_requests(cfqd))
+ if (!cfqd->rq_in_driver && cfqd->busy_queues)
kblockd_schedule_work(&cfqd->unplug_work);
}
@@ -366,7 +346,7 @@
{
struct cfq_data *cfqd = q->elevator->elevator_data;
- return !cfq_pending_requests(cfqd);
+ return !cfqd->busy_queues;
}
/*
@@ -386,11 +366,6 @@
if (crq2 == NULL)
return crq1;
- if (cfq_crq_requeued(crq1) && !cfq_crq_requeued(crq2))
- return crq1;
- else if (cfq_crq_requeued(crq2) && !cfq_crq_requeued(crq1))
- return crq2;
-
if (cfq_crq_is_sync(crq1) && !cfq_crq_is_sync(crq2))
return crq1;
else if (cfq_crq_is_sync(crq2) && !cfq_crq_is_sync(crq1))
@@ -461,10 +436,7 @@
struct cfq_rq *crq_next = NULL, *crq_prev = NULL;
struct rb_node *rbnext, *rbprev;
- rbnext = NULL;
- if (ON_RB(&last->rb_node))
- rbnext = rb_next(&last->rb_node);
- if (!rbnext) {
+ if (!(rbnext = rb_next(&last->rb_node))) {
rbnext = rb_first(&cfqq->sort_list);
if (rbnext == &last->rb_node)
rbnext = NULL;
@@ -545,13 +517,13 @@
* the pending list according to last request service
*/
static inline void
-cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq, int requeue)
+cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
BUG_ON(cfq_cfqq_on_rr(cfqq));
cfq_mark_cfqq_on_rr(cfqq);
cfqd->busy_queues++;
- cfq_resort_rr_list(cfqq, requeue);
+ cfq_resort_rr_list(cfqq, 0);
}
static inline void
@@ -571,22 +543,19 @@
static inline void cfq_del_crq_rb(struct cfq_rq *crq)
{
struct cfq_queue *cfqq = crq->cfq_queue;
+ struct cfq_data *cfqd = cfqq->cfqd;
+ const int sync = cfq_crq_is_sync(crq);
- if (ON_RB(&crq->rb_node)) {
- struct cfq_data *cfqd = cfqq->cfqd;
- const int sync = cfq_crq_is_sync(crq);
+ BUG_ON(!cfqq->queued[sync]);
+ cfqq->queued[sync]--;
- BUG_ON(!cfqq->queued[sync]);
- cfqq->queued[sync]--;
+ cfq_update_next_crq(crq);
- cfq_update_next_crq(crq);
+ rb_erase(&crq->rb_node, &cfqq->sort_list);
+ RB_CLEAR_COLOR(&crq->rb_node);
- rb_erase(&crq->rb_node, &cfqq->sort_list);
- RB_CLEAR_COLOR(&crq->rb_node);
-
- if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY(&cfqq->sort_list))
- cfq_del_cfqq_rr(cfqd, cfqq);
- }
+ if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY(&cfqq->sort_list))
+ cfq_del_cfqq_rr(cfqd, cfqq);
}
static struct cfq_rq *
@@ -627,12 +596,12 @@
* if that happens, put the alias on the dispatch list
*/
while ((__alias = __cfq_add_crq_rb(crq)) != NULL)
- cfq_dispatch_sort(cfqd->queue, __alias);
+ cfq_dispatch_insert(cfqd->queue, __alias);
rb_insert_color(&crq->rb_node, &cfqq->sort_list);
if (!cfq_cfqq_on_rr(cfqq))
- cfq_add_cfqq_rr(cfqd, cfqq, cfq_crq_requeued(crq));
+ cfq_add_cfqq_rr(cfqd, cfqq);
/*
* check if this request is a better next-serve candidate
@@ -643,10 +612,8 @@
static inline void
cfq_reposition_crq_rb(struct cfq_queue *cfqq, struct cfq_rq *crq)
{
- if (ON_RB(&crq->rb_node)) {
- rb_erase(&crq->rb_node, &cfqq->sort_list);
- cfqq->queued[cfq_crq_is_sync(crq)]--;
- }
+ rb_erase(&crq->rb_node, &cfqq->sort_list);
+ cfqq->queued[cfq_crq_is_sync(crq)]--;
cfq_add_crq_rb(crq);
}
@@ -676,49 +643,28 @@
return NULL;
}
+static void cfq_activate_request(request_queue_t *q, struct request *rq)
+{
+ struct cfq_data *cfqd = q->elevator->elevator_data;
+
+ cfqd->rq_in_driver++;
+}
+
static void cfq_deactivate_request(request_queue_t *q, struct request *rq)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
- struct cfq_rq *crq = RQ_DATA(rq);
- if (crq) {
- struct cfq_queue *cfqq = crq->cfq_queue;
-
- if (cfq_crq_in_driver(crq)) {
- cfq_clear_crq_in_driver(crq);
- WARN_ON(!cfqd->rq_in_driver);
- cfqd->rq_in_driver--;
- }
- if (cfq_crq_in_flight(crq)) {
- const int sync = cfq_crq_is_sync(crq);
-
- cfq_clear_crq_in_flight(crq);
- WARN_ON(!cfqq->on_dispatch[sync]);
- cfqq->on_dispatch[sync]--;
- }
- cfq_mark_crq_requeued(crq);
- }
+ WARN_ON(!cfqd->rq_in_driver);
+ cfqd->rq_in_driver--;
}
-/*
- * make sure the service time gets corrected on reissue of this request
- */
-static void cfq_requeue_request(request_queue_t *q, struct request *rq)
-{
- cfq_deactivate_request(q, rq);
- list_add(&rq->queuelist, &q->queue_head);
-}
-
-static void cfq_remove_request(request_queue_t *q, struct request *rq)
+static void cfq_remove_request(struct request *rq)
{
struct cfq_rq *crq = RQ_DATA(rq);
- if (crq) {
- list_del_init(&rq->queuelist);
- cfq_del_crq_rb(crq);
- cfq_remove_merge_hints(q, crq);
-
- }
+ list_del_init(&rq->queuelist);
+ cfq_del_crq_rb(crq);
+ cfq_del_crq_hash(crq);
}
static int
@@ -728,12 +674,6 @@
struct request *__rq;
int ret;
- ret = elv_try_last_merge(q, bio);
- if (ret != ELEVATOR_NO_MERGE) {
- __rq = q->last_merge;
- goto out_insert;
- }
-
__rq = cfq_find_rq_hash(cfqd, bio->bi_sector);
if (__rq && elv_rq_merge_ok(__rq, bio)) {
ret = ELEVATOR_BACK_MERGE;
@@ -748,8 +688,6 @@
return ELEVATOR_NO_MERGE;
out:
- q->last_merge = __rq;
-out_insert:
*req = __rq;
return ret;
}
@@ -762,14 +700,12 @@
cfq_del_crq_hash(crq);
cfq_add_crq_hash(cfqd, crq);
- if (ON_RB(&crq->rb_node) && (rq_rb_key(req) != crq->rb_key)) {
+ if (rq_rb_key(req) != crq->rb_key) {
struct cfq_queue *cfqq = crq->cfq_queue;
cfq_update_next_crq(crq);
cfq_reposition_crq_rb(cfqq, crq);
}
-
- q->last_merge = req;
}
static void
@@ -785,7 +721,7 @@
time_before(next->start_time, rq->start_time))
list_move(&rq->queuelist, &next->queuelist);
- cfq_remove_request(q, next);
+ cfq_remove_request(next);
}
static inline void
@@ -992,53 +928,15 @@
return 1;
}
-/*
- * we dispatch cfqd->cfq_quantum requests in total from the rr_list queues,
- * this function sector sorts the selected request to minimize seeks. we start
- * at cfqd->last_sector, not 0.
- */
-static void cfq_dispatch_sort(request_queue_t *q, struct cfq_rq *crq)
+static void cfq_dispatch_insert(request_queue_t *q, struct cfq_rq *crq)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_queue *cfqq = crq->cfq_queue;
- struct list_head *head = &q->queue_head, *entry = head;
- struct request *__rq;
- sector_t last;
-
- list_del(&crq->request->queuelist);
-
- last = cfqd->last_sector;
- list_for_each_entry_reverse(__rq, head, queuelist) {
- struct cfq_rq *__crq = RQ_DATA(__rq);
-
- if (blk_barrier_rq(__rq))
- break;
- if (!blk_fs_request(__rq))
- break;
- if (cfq_crq_requeued(__crq))
- break;
-
- if (__rq->sector <= crq->request->sector)
- break;
- if (__rq->sector > last && crq->request->sector < last) {
- last = crq->request->sector + crq->request->nr_sectors;
- break;
- }
- entry = &__rq->queuelist;
- }
-
- cfqd->last_sector = last;
cfqq->next_crq = cfq_find_next_crq(cfqd, cfqq, crq);
-
- cfq_del_crq_rb(crq);
- cfq_remove_merge_hints(q, crq);
-
- cfq_mark_crq_in_flight(crq);
- cfq_clear_crq_requeued(crq);
-
+ cfq_remove_request(crq->request);
cfqq->on_dispatch[cfq_crq_is_sync(crq)]++;
- list_add_tail(&crq->request->queuelist, entry);
+ elv_dispatch_sort(q, crq->request);
}
/*
@@ -1159,7 +1057,7 @@
/*
* finally, insert request into driver dispatch list
*/
- cfq_dispatch_sort(cfqd->queue, crq);
+ cfq_dispatch_insert(cfqd->queue, crq);
cfqd->dispatch_slice++;
dispatched++;
@@ -1194,7 +1092,7 @@
}
static int
-cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force)
+cfq_dispatch_requests(request_queue_t *q, int force)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_queue *cfqq;
@@ -1204,12 +1102,25 @@
cfqq = cfq_select_queue(cfqd, force);
if (cfqq) {
+ int max_dispatch;
+
+ /*
+ * if idle window is disabled, allow queue buildup
+ */
+ if (!cfq_cfqq_idle_window(cfqq) &&
+ cfqd->rq_in_driver >= cfqd->cfq_max_depth)
+ return 0;
+
cfq_clear_cfqq_must_dispatch(cfqq);
cfq_clear_cfqq_wait_request(cfqq);
del_timer(&cfqd->idle_slice_timer);
- if (cfq_class_idle(cfqq))
- max_dispatch = 1;
+ if (!force) {
+ max_dispatch = cfqd->cfq_quantum;
+ if (cfq_class_idle(cfqq))
+ max_dispatch = 1;
+ } else
+ max_dispatch = INT_MAX;
return __cfq_dispatch_requests(cfqd, cfqq, max_dispatch);
}
@@ -1217,93 +1128,6 @@
return 0;
}
-static inline void cfq_account_dispatch(struct cfq_rq *crq)
-{
- struct cfq_queue *cfqq = crq->cfq_queue;
- struct cfq_data *cfqd = cfqq->cfqd;
-
- if (unlikely(!blk_fs_request(crq->request)))
- return;
-
- /*
- * accounted bit is necessary since some drivers will call
- * elv_next_request() many times for the same request (eg ide)
- */
- if (cfq_crq_in_driver(crq))
- return;
-
- cfq_mark_crq_in_driver(crq);
- cfqd->rq_in_driver++;
-}
-
-static inline void
-cfq_account_completion(struct cfq_queue *cfqq, struct cfq_rq *crq)
-{
- struct cfq_data *cfqd = cfqq->cfqd;
- unsigned long now;
-
- if (!cfq_crq_in_driver(crq))
- return;
-
- now = jiffies;
-
- WARN_ON(!cfqd->rq_in_driver);
- cfqd->rq_in_driver--;
-
- if (!cfq_class_idle(cfqq))
- cfqd->last_end_request = now;
-
- if (!cfq_cfqq_dispatched(cfqq)) {
- if (cfq_cfqq_on_rr(cfqq)) {
- cfqq->service_last = now;
- cfq_resort_rr_list(cfqq, 0);
- }
- if (cfq_cfqq_expired(cfqq)) {
- __cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
- }
-
- if (cfq_crq_is_sync(crq))
- crq->io_context->last_end_request = now;
-}
-
-static struct request *cfq_next_request(request_queue_t *q)
-{
- struct cfq_data *cfqd = q->elevator->elevator_data;
- struct request *rq;
-
- if (!list_empty(&q->queue_head)) {
- struct cfq_rq *crq;
-dispatch:
- rq = list_entry_rq(q->queue_head.next);
-
- crq = RQ_DATA(rq);
- if (crq) {
- struct cfq_queue *cfqq = crq->cfq_queue;
-
- /*
- * if idle window is disabled, allow queue buildup
- */
- if (!cfq_crq_in_driver(crq) &&
- !cfq_cfqq_idle_window(cfqq) &&
- !blk_barrier_rq(rq) &&
- cfqd->rq_in_driver >= cfqd->cfq_max_depth)
- return NULL;
-
- cfq_remove_merge_hints(q, crq);
- cfq_account_dispatch(crq);
- }
-
- return rq;
- }
-
- if (cfq_dispatch_requests(q, cfqd->cfq_quantum, 0))
- goto dispatch;
-
- return NULL;
-}
-
/*
* task holds one reference to the queue, dropped when task exits. each crq
* in-flight on this queue also holds a reference, dropped when crq is freed.
@@ -1422,7 +1246,7 @@
}
static struct cfq_io_context *
-cfq_alloc_io_context(struct cfq_data *cfqd, int gfp_mask)
+cfq_alloc_io_context(struct cfq_data *cfqd, gfp_t gfp_mask)
{
struct cfq_io_context *cic = kmem_cache_alloc(cfq_ioc_pool, gfp_mask);
@@ -1517,7 +1341,7 @@
static struct cfq_queue *
cfq_get_queue(struct cfq_data *cfqd, unsigned int key, unsigned short ioprio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
const int hashval = hash_long(key, CFQ_QHASH_SHIFT);
struct cfq_queue *cfqq, *new_cfqq = NULL;
@@ -1578,7 +1402,7 @@
* cfqq, so we don't need to worry about it disappearing
*/
static struct cfq_io_context *
-cfq_get_io_context(struct cfq_data *cfqd, pid_t pid, int gfp_mask)
+cfq_get_io_context(struct cfq_data *cfqd, pid_t pid, gfp_t gfp_mask)
{
struct io_context *ioc = NULL;
struct cfq_io_context *cic;
@@ -1816,8 +1640,9 @@
}
}
-static void cfq_enqueue(struct cfq_data *cfqd, struct request *rq)
+static void cfq_insert_request(request_queue_t *q, struct request *rq)
{
+ struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_rq *crq = RQ_DATA(rq);
struct cfq_queue *cfqq = crq->cfq_queue;
@@ -1827,66 +1652,43 @@
list_add_tail(&rq->queuelist, &cfqq->fifo);
- if (rq_mergeable(rq)) {
+ if (rq_mergeable(rq))
cfq_add_crq_hash(cfqd, crq);
- if (!cfqd->queue->last_merge)
- cfqd->queue->last_merge = rq;
- }
-
cfq_crq_enqueued(cfqd, cfqq, crq);
}
-static void
-cfq_insert_request(request_queue_t *q, struct request *rq, int where)
-{
- struct cfq_data *cfqd = q->elevator->elevator_data;
-
- switch (where) {
- case ELEVATOR_INSERT_BACK:
- while (cfq_dispatch_requests(q, INT_MAX, 1))
- ;
- list_add_tail(&rq->queuelist, &q->queue_head);
- /*
- * If we were idling with pending requests on
- * inactive cfqqs, force dispatching will
- * remove the idle timer and the queue won't
- * be kicked by __make_request() afterward.
- * Kick it here.
- */
- cfq_schedule_dispatch(cfqd);
- break;
- case ELEVATOR_INSERT_FRONT:
- list_add(&rq->queuelist, &q->queue_head);
- break;
- case ELEVATOR_INSERT_SORT:
- BUG_ON(!blk_fs_request(rq));
- cfq_enqueue(cfqd, rq);
- break;
- default:
- printk("%s: bad insert point %d\n", __FUNCTION__,where);
- return;
- }
-}
-
static void cfq_completed_request(request_queue_t *q, struct request *rq)
{
struct cfq_rq *crq = RQ_DATA(rq);
- struct cfq_queue *cfqq;
+ struct cfq_queue *cfqq = crq->cfq_queue;
+ struct cfq_data *cfqd = cfqq->cfqd;
+ const int sync = cfq_crq_is_sync(crq);
+ unsigned long now;
- if (unlikely(!blk_fs_request(rq)))
- return;
+ now = jiffies;
- cfqq = crq->cfq_queue;
+ WARN_ON(!cfqd->rq_in_driver);
+ WARN_ON(!cfqq->on_dispatch[sync]);
+ cfqd->rq_in_driver--;
+ cfqq->on_dispatch[sync]--;
- if (cfq_crq_in_flight(crq)) {
- const int sync = cfq_crq_is_sync(crq);
+ if (!cfq_class_idle(cfqq))
+ cfqd->last_end_request = now;
- WARN_ON(!cfqq->on_dispatch[sync]);
- cfqq->on_dispatch[sync]--;
+ if (!cfq_cfqq_dispatched(cfqq)) {
+ if (cfq_cfqq_on_rr(cfqq)) {
+ cfqq->service_last = now;
+ cfq_resort_rr_list(cfqq, 0);
+ }
+ if (cfq_cfqq_expired(cfqq)) {
+ __cfq_slice_expired(cfqd, cfqq, 0);
+ cfq_schedule_dispatch(cfqd);
+ }
}
- cfq_account_completion(cfqq, crq);
+ if (cfq_crq_is_sync(crq))
+ crq->io_context->last_end_request = now;
}
static struct request *
@@ -2075,7 +1877,7 @@
*/
static int
cfq_set_request(request_queue_t *q, struct request *rq, struct bio *bio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
struct task_struct *tsk = current;
@@ -2118,9 +1920,6 @@
INIT_HLIST_NODE(&crq->hash);
crq->cfq_queue = cfqq;
crq->io_context = cic;
- cfq_clear_crq_in_flight(crq);
- cfq_clear_crq_in_driver(crq);
- cfq_clear_crq_requeued(crq);
if (rw == READ || process_sync(tsk))
cfq_mark_crq_is_sync(crq);
@@ -2201,7 +2000,7 @@
* only expire and reinvoke request handler, if there are
* other queues with pending requests
*/
- if (!cfq_pending_requests(cfqd)) {
+ if (!cfqd->busy_queues) {
cfqd->idle_slice_timer.expires = min(now + cfqd->cfq_slice_idle, cfqq->slice_end);
add_timer(&cfqd->idle_slice_timer);
goto out_cont;
@@ -2576,10 +2375,9 @@
.elevator_merge_fn = cfq_merge,
.elevator_merged_fn = cfq_merged_request,
.elevator_merge_req_fn = cfq_merged_requests,
- .elevator_next_req_fn = cfq_next_request,
+ .elevator_dispatch_fn = cfq_dispatch_requests,
.elevator_add_req_fn = cfq_insert_request,
- .elevator_remove_req_fn = cfq_remove_request,
- .elevator_requeue_req_fn = cfq_requeue_request,
+ .elevator_activate_req_fn = cfq_activate_request,
.elevator_deactivate_req_fn = cfq_deactivate_request,
.elevator_queue_empty_fn = cfq_queue_empty,
.elevator_completed_req_fn = cfq_completed_request,
@@ -2620,28 +2418,8 @@
static void __exit cfq_exit(void)
{
- struct task_struct *g, *p;
- unsigned long flags;
-
- read_lock_irqsave(&tasklist_lock, flags);
-
- /*
- * iterate each process in the system, removing our io_context
- */
- do_each_thread(g, p) {
- struct io_context *ioc = p->io_context;
-
- if (ioc && ioc->cic) {
- ioc->cic->exit(ioc->cic);
- cfq_free_io_context(ioc->cic);
- ioc->cic = NULL;
- }
- } while_each_thread(g, p);
-
- read_unlock_irqrestore(&tasklist_lock, flags);
-
- cfq_slab_kill();
elv_unregister(&iosched_cfq);
+ cfq_slab_kill();
}
module_init(cfq_init);
diff --git a/drivers/block/deadline-iosched.c b/drivers/block/deadline-iosched.c
index 52a3ae5..7929471 100644
--- a/drivers/block/deadline-iosched.c
+++ b/drivers/block/deadline-iosched.c
@@ -50,7 +50,6 @@
* next in sort order. read, write or both are NULL
*/
struct deadline_rq *next_drq[2];
- struct list_head *dispatch; /* driver dispatch queue */
struct list_head *hash; /* request hash */
unsigned int batching; /* number of sequential requests made */
sector_t last_sector; /* head position */
@@ -113,15 +112,6 @@
__deadline_del_drq_hash(drq);
}
-static void
-deadline_remove_merge_hints(request_queue_t *q, struct deadline_rq *drq)
-{
- deadline_del_drq_hash(drq);
-
- if (q->last_merge == drq->request)
- q->last_merge = NULL;
-}
-
static inline void
deadline_add_drq_hash(struct deadline_data *dd, struct deadline_rq *drq)
{
@@ -239,10 +229,9 @@
dd->next_drq[data_dir] = rb_entry_drq(rbnext);
}
- if (ON_RB(&drq->rb_node)) {
- rb_erase(&drq->rb_node, DRQ_RB_ROOT(dd, drq));
- RB_CLEAR(&drq->rb_node);
- }
+ BUG_ON(!ON_RB(&drq->rb_node));
+ rb_erase(&drq->rb_node, DRQ_RB_ROOT(dd, drq));
+ RB_CLEAR(&drq->rb_node);
}
static struct request *
@@ -286,7 +275,7 @@
/*
* add drq to rbtree and fifo
*/
-static inline void
+static void
deadline_add_request(struct request_queue *q, struct request *rq)
{
struct deadline_data *dd = q->elevator->elevator_data;
@@ -301,12 +290,8 @@
drq->expires = jiffies + dd->fifo_expire[data_dir];
list_add_tail(&drq->fifo, &dd->fifo_list[data_dir]);
- if (rq_mergeable(rq)) {
+ if (rq_mergeable(rq))
deadline_add_drq_hash(dd, drq);
-
- if (!q->last_merge)
- q->last_merge = rq;
- }
}
/*
@@ -315,14 +300,11 @@
static void deadline_remove_request(request_queue_t *q, struct request *rq)
{
struct deadline_rq *drq = RQ_DATA(rq);
+ struct deadline_data *dd = q->elevator->elevator_data;
- if (drq) {
- struct deadline_data *dd = q->elevator->elevator_data;
-
- list_del_init(&drq->fifo);
- deadline_remove_merge_hints(q, drq);
- deadline_del_drq_rb(dd, drq);
- }
+ list_del_init(&drq->fifo);
+ deadline_del_drq_rb(dd, drq);
+ deadline_del_drq_hash(drq);
}
static int
@@ -333,15 +315,6 @@
int ret;
/*
- * try last_merge to avoid going to hash
- */
- ret = elv_try_last_merge(q, bio);
- if (ret != ELEVATOR_NO_MERGE) {
- __rq = q->last_merge;
- goto out_insert;
- }
-
- /*
* see if the merge hash can satisfy a back merge
*/
__rq = deadline_find_drq_hash(dd, bio->bi_sector);
@@ -373,8 +346,6 @@
return ELEVATOR_NO_MERGE;
out:
- q->last_merge = __rq;
-out_insert:
if (ret)
deadline_hot_drq_hash(dd, RQ_DATA(__rq));
*req = __rq;
@@ -399,8 +370,6 @@
deadline_del_drq_rb(dd, drq);
deadline_add_drq_rb(dd, drq);
}
-
- q->last_merge = req;
}
static void
@@ -452,7 +421,7 @@
request_queue_t *q = drq->request->q;
deadline_remove_request(q, drq->request);
- list_add_tail(&drq->request->queuelist, dd->dispatch);
+ elv_dispatch_add_tail(q, drq->request);
}
/*
@@ -502,8 +471,9 @@
* deadline_dispatch_requests selects the best request according to
* read/write expire, fifo_batch, etc
*/
-static int deadline_dispatch_requests(struct deadline_data *dd)
+static int deadline_dispatch_requests(request_queue_t *q, int force)
{
+ struct deadline_data *dd = q->elevator->elevator_data;
const int reads = !list_empty(&dd->fifo_list[READ]);
const int writes = !list_empty(&dd->fifo_list[WRITE]);
struct deadline_rq *drq;
@@ -597,65 +567,12 @@
return 1;
}
-static struct request *deadline_next_request(request_queue_t *q)
-{
- struct deadline_data *dd = q->elevator->elevator_data;
- struct request *rq;
-
- /*
- * if there are still requests on the dispatch queue, grab the first one
- */
- if (!list_empty(dd->dispatch)) {
-dispatch:
- rq = list_entry_rq(dd->dispatch->next);
- return rq;
- }
-
- if (deadline_dispatch_requests(dd))
- goto dispatch;
-
- return NULL;
-}
-
-static void
-deadline_insert_request(request_queue_t *q, struct request *rq, int where)
-{
- struct deadline_data *dd = q->elevator->elevator_data;
-
- /* barriers must flush the reorder queue */
- if (unlikely(rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)
- && where == ELEVATOR_INSERT_SORT))
- where = ELEVATOR_INSERT_BACK;
-
- switch (where) {
- case ELEVATOR_INSERT_BACK:
- while (deadline_dispatch_requests(dd))
- ;
- list_add_tail(&rq->queuelist, dd->dispatch);
- break;
- case ELEVATOR_INSERT_FRONT:
- list_add(&rq->queuelist, dd->dispatch);
- break;
- case ELEVATOR_INSERT_SORT:
- BUG_ON(!blk_fs_request(rq));
- deadline_add_request(q, rq);
- break;
- default:
- printk("%s: bad insert point %d\n", __FUNCTION__,where);
- return;
- }
-}
-
static int deadline_queue_empty(request_queue_t *q)
{
struct deadline_data *dd = q->elevator->elevator_data;
- if (!list_empty(&dd->fifo_list[WRITE])
- || !list_empty(&dd->fifo_list[READ])
- || !list_empty(dd->dispatch))
- return 0;
-
- return 1;
+ return list_empty(&dd->fifo_list[WRITE])
+ && list_empty(&dd->fifo_list[READ]);
}
static struct request *
@@ -733,7 +650,6 @@
INIT_LIST_HEAD(&dd->fifo_list[WRITE]);
dd->sort_list[READ] = RB_ROOT;
dd->sort_list[WRITE] = RB_ROOT;
- dd->dispatch = &q->queue_head;
dd->fifo_expire[READ] = read_expire;
dd->fifo_expire[WRITE] = write_expire;
dd->writes_starved = writes_starved;
@@ -748,15 +664,13 @@
struct deadline_data *dd = q->elevator->elevator_data;
struct deadline_rq *drq = RQ_DATA(rq);
- if (drq) {
- mempool_free(drq, dd->drq_pool);
- rq->elevator_private = NULL;
- }
+ mempool_free(drq, dd->drq_pool);
+ rq->elevator_private = NULL;
}
static int
deadline_set_request(request_queue_t *q, struct request *rq, struct bio *bio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct deadline_data *dd = q->elevator->elevator_data;
struct deadline_rq *drq;
@@ -917,9 +831,8 @@
.elevator_merge_fn = deadline_merge,
.elevator_merged_fn = deadline_merged_request,
.elevator_merge_req_fn = deadline_merged_requests,
- .elevator_next_req_fn = deadline_next_request,
- .elevator_add_req_fn = deadline_insert_request,
- .elevator_remove_req_fn = deadline_remove_request,
+ .elevator_dispatch_fn = deadline_dispatch_requests,
+ .elevator_add_req_fn = deadline_add_request,
.elevator_queue_empty_fn = deadline_queue_empty,
.elevator_former_req_fn = deadline_former_request,
.elevator_latter_req_fn = deadline_latter_request,
diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c
index 98f0126..36f1057 100644
--- a/drivers/block/elevator.c
+++ b/drivers/block/elevator.c
@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/compiler.h>
+#include <linux/delay.h>
#include <asm/uaccess.h>
@@ -83,21 +84,11 @@
}
EXPORT_SYMBOL(elv_try_merge);
-inline int elv_try_last_merge(request_queue_t *q, struct bio *bio)
-{
- if (q->last_merge)
- return elv_try_merge(q->last_merge, bio);
-
- return ELEVATOR_NO_MERGE;
-}
-EXPORT_SYMBOL(elv_try_last_merge);
-
static struct elevator_type *elevator_find(const char *name)
{
struct elevator_type *e = NULL;
struct list_head *entry;
- spin_lock_irq(&elv_list_lock);
list_for_each(entry, &elv_list) {
struct elevator_type *__e;
@@ -108,7 +99,6 @@
break;
}
}
- spin_unlock_irq(&elv_list_lock);
return e;
}
@@ -120,12 +110,15 @@
static struct elevator_type *elevator_get(const char *name)
{
- struct elevator_type *e = elevator_find(name);
+ struct elevator_type *e;
- if (!e)
- return NULL;
- if (!try_module_get(e->elevator_owner))
- return NULL;
+ spin_lock_irq(&elv_list_lock);
+
+ e = elevator_find(name);
+ if (e && !try_module_get(e->elevator_owner))
+ e = NULL;
+
+ spin_unlock_irq(&elv_list_lock);
return e;
}
@@ -139,8 +132,6 @@
eq->ops = &e->ops;
eq->elevator_type = e;
- INIT_LIST_HEAD(&q->queue_head);
- q->last_merge = NULL;
q->elevator = eq;
if (eq->ops->elevator_init_fn)
@@ -153,23 +144,20 @@
static void elevator_setup_default(void)
{
- /*
- * check if default is set and exists
- */
- if (chosen_elevator[0] && elevator_find(chosen_elevator))
- return;
+ struct elevator_type *e;
-#if defined(CONFIG_IOSCHED_AS)
- strcpy(chosen_elevator, "anticipatory");
-#elif defined(CONFIG_IOSCHED_DEADLINE)
- strcpy(chosen_elevator, "deadline");
-#elif defined(CONFIG_IOSCHED_CFQ)
- strcpy(chosen_elevator, "cfq");
-#elif defined(CONFIG_IOSCHED_NOOP)
- strcpy(chosen_elevator, "noop");
-#else
-#error "You must build at least 1 IO scheduler into the kernel"
-#endif
+ /*
+ * If default has not been set, use the compiled-in selection.
+ */
+ if (!chosen_elevator[0])
+ strcpy(chosen_elevator, CONFIG_DEFAULT_IOSCHED);
+
+ /*
+ * If the given scheduler is not available, fall back to no-op.
+ */
+ if (!(e = elevator_find(chosen_elevator)))
+ strcpy(chosen_elevator, "noop");
+ elevator_put(e);
}
static int __init elevator_setup(char *str)
@@ -186,6 +174,11 @@
struct elevator_queue *eq;
int ret = 0;
+ INIT_LIST_HEAD(&q->queue_head);
+ q->last_merge = NULL;
+ q->end_sector = 0;
+ q->boundary_rq = NULL;
+
elevator_setup_default();
if (!name)
@@ -220,9 +213,52 @@
kfree(e);
}
+/*
+ * Insert rq into dispatch queue of q. Queue lock must be held on
+ * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be
+ * appended to the dispatch queue. To be used by specific elevators.
+ */
+void elv_dispatch_sort(request_queue_t *q, struct request *rq)
+{
+ sector_t boundary;
+ struct list_head *entry;
+
+ if (q->last_merge == rq)
+ q->last_merge = NULL;
+
+ boundary = q->end_sector;
+
+ list_for_each_prev(entry, &q->queue_head) {
+ struct request *pos = list_entry_rq(entry);
+
+ if (pos->flags & (REQ_SOFTBARRIER|REQ_HARDBARRIER|REQ_STARTED))
+ break;
+ if (rq->sector >= boundary) {
+ if (pos->sector < boundary)
+ continue;
+ } else {
+ if (pos->sector >= boundary)
+ break;
+ }
+ if (rq->sector >= pos->sector)
+ break;
+ }
+
+ list_add(&rq->queuelist, entry);
+}
+
int elv_merge(request_queue_t *q, struct request **req, struct bio *bio)
{
elevator_t *e = q->elevator;
+ int ret;
+
+ if (q->last_merge) {
+ ret = elv_try_merge(q->last_merge, bio);
+ if (ret != ELEVATOR_NO_MERGE) {
+ *req = q->last_merge;
+ return ret;
+ }
+ }
if (e->ops->elevator_merge_fn)
return e->ops->elevator_merge_fn(q, req, bio);
@@ -236,6 +272,8 @@
if (e->ops->elevator_merged_fn)
e->ops->elevator_merged_fn(q, rq);
+
+ q->last_merge = rq;
}
void elv_merge_requests(request_queue_t *q, struct request *rq,
@@ -243,20 +281,13 @@
{
elevator_t *e = q->elevator;
- if (q->last_merge == next)
- q->last_merge = NULL;
-
if (e->ops->elevator_merge_req_fn)
e->ops->elevator_merge_req_fn(q, rq, next);
+
+ q->last_merge = rq;
}
-/*
- * For careful internal use by the block layer. Essentially the same as
- * a requeue in that it tells the io scheduler that this request is not
- * active in the driver or hardware anymore, but we don't want the request
- * added back to the scheduler. Function is not exported.
- */
-void elv_deactivate_request(request_queue_t *q, struct request *rq)
+void elv_requeue_request(request_queue_t *q, struct request *rq)
{
elevator_t *e = q->elevator;
@@ -264,19 +295,14 @@
* it already went through dequeue, we need to decrement the
* in_flight count again
*/
- if (blk_account_rq(rq))
+ if (blk_account_rq(rq)) {
q->in_flight--;
+ if (blk_sorted_rq(rq) && e->ops->elevator_deactivate_req_fn)
+ e->ops->elevator_deactivate_req_fn(q, rq);
+ }
rq->flags &= ~REQ_STARTED;
- if (e->ops->elevator_deactivate_req_fn)
- e->ops->elevator_deactivate_req_fn(q, rq);
-}
-
-void elv_requeue_request(request_queue_t *q, struct request *rq)
-{
- elv_deactivate_request(q, rq);
-
/*
* if this is the flush, requeue the original instead and drop the flush
*/
@@ -285,31 +311,27 @@
rq = rq->end_io_data;
}
- /*
- * the request is prepped and may have some resources allocated.
- * allowing unprepped requests to pass this one may cause resource
- * deadlock. turn on softbarrier.
- */
- rq->flags |= REQ_SOFTBARRIER;
-
- /*
- * if iosched has an explicit requeue hook, then use that. otherwise
- * just put the request at the front of the queue
- */
- if (q->elevator->ops->elevator_requeue_req_fn)
- q->elevator->ops->elevator_requeue_req_fn(q, rq);
- else
- __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
+ __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
}
void __elv_add_request(request_queue_t *q, struct request *rq, int where,
int plug)
{
- /*
- * barriers implicitly indicate back insertion
- */
- if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER) &&
- where == ELEVATOR_INSERT_SORT)
+ if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
+ /*
+ * barriers implicitly indicate back insertion
+ */
+ if (where == ELEVATOR_INSERT_SORT)
+ where = ELEVATOR_INSERT_BACK;
+
+ /*
+ * this request is scheduling boundary, update end_sector
+ */
+ if (blk_fs_request(rq)) {
+ q->end_sector = rq_end_sector(rq);
+ q->boundary_rq = rq;
+ }
+ } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT)
where = ELEVATOR_INSERT_BACK;
if (plug)
@@ -317,23 +339,54 @@
rq->q = q;
- if (!test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)) {
- q->elevator->ops->elevator_add_req_fn(q, rq, where);
+ switch (where) {
+ case ELEVATOR_INSERT_FRONT:
+ rq->flags |= REQ_SOFTBARRIER;
- if (blk_queue_plugged(q)) {
- int nrq = q->rq.count[READ] + q->rq.count[WRITE]
- - q->in_flight;
+ list_add(&rq->queuelist, &q->queue_head);
+ break;
- if (nrq >= q->unplug_thresh)
- __generic_unplug_device(q);
- }
- } else
+ case ELEVATOR_INSERT_BACK:
+ rq->flags |= REQ_SOFTBARRIER;
+
+ while (q->elevator->ops->elevator_dispatch_fn(q, 1))
+ ;
+ list_add_tail(&rq->queuelist, &q->queue_head);
/*
- * if drain is set, store the request "locally". when the drain
- * is finished, the requests will be handed ordered to the io
- * scheduler
+ * We kick the queue here for the following reasons.
+ * - The elevator might have returned NULL previously
+ * to delay requests and returned them now. As the
+ * queue wasn't empty before this request, ll_rw_blk
+ * won't run the queue on return, resulting in hang.
+ * - Usually, back inserted requests won't be merged
+ * with anything. There's no point in delaying queue
+ * processing.
*/
- list_add_tail(&rq->queuelist, &q->drain_list);
+ blk_remove_plug(q);
+ q->request_fn(q);
+ break;
+
+ case ELEVATOR_INSERT_SORT:
+ BUG_ON(!blk_fs_request(rq));
+ rq->flags |= REQ_SORTED;
+ q->elevator->ops->elevator_add_req_fn(q, rq);
+ if (q->last_merge == NULL && rq_mergeable(rq))
+ q->last_merge = rq;
+ break;
+
+ default:
+ printk(KERN_ERR "%s: bad insertion point %d\n",
+ __FUNCTION__, where);
+ BUG();
+ }
+
+ if (blk_queue_plugged(q)) {
+ int nrq = q->rq.count[READ] + q->rq.count[WRITE]
+ - q->in_flight;
+
+ if (nrq >= q->unplug_thresh)
+ __generic_unplug_device(q);
+ }
}
void elv_add_request(request_queue_t *q, struct request *rq, int where,
@@ -348,13 +401,19 @@
static inline struct request *__elv_next_request(request_queue_t *q)
{
- struct request *rq = q->elevator->ops->elevator_next_req_fn(q);
+ struct request *rq;
+
+ if (unlikely(list_empty(&q->queue_head) &&
+ !q->elevator->ops->elevator_dispatch_fn(q, 0)))
+ return NULL;
+
+ rq = list_entry_rq(q->queue_head.next);
/*
* if this is a barrier write and the device has to issue a
* flush sequence to support it, check how far we are
*/
- if (rq && blk_fs_request(rq) && blk_barrier_rq(rq)) {
+ if (blk_fs_request(rq) && blk_barrier_rq(rq)) {
BUG_ON(q->ordered == QUEUE_ORDERED_NONE);
if (q->ordered == QUEUE_ORDERED_FLUSH &&
@@ -371,15 +430,30 @@
int ret;
while ((rq = __elv_next_request(q)) != NULL) {
- /*
- * just mark as started even if we don't start it, a request
- * that has been delayed should not be passed by new incoming
- * requests
- */
- rq->flags |= REQ_STARTED;
+ if (!(rq->flags & REQ_STARTED)) {
+ elevator_t *e = q->elevator;
- if (rq == q->last_merge)
- q->last_merge = NULL;
+ /*
+ * This is the first time the device driver
+ * sees this request (possibly after
+ * requeueing). Notify IO scheduler.
+ */
+ if (blk_sorted_rq(rq) &&
+ e->ops->elevator_activate_req_fn)
+ e->ops->elevator_activate_req_fn(q, rq);
+
+ /*
+ * just mark as started even if we don't start
+ * it, a request that has been delayed should
+ * not be passed by new incoming requests
+ */
+ rq->flags |= REQ_STARTED;
+ }
+
+ if (!q->boundary_rq || q->boundary_rq == rq) {
+ q->end_sector = rq_end_sector(rq);
+ q->boundary_rq = NULL;
+ }
if ((rq->flags & REQ_DONTPREP) || !q->prep_rq_fn)
break;
@@ -391,9 +465,9 @@
/*
* the request may have been (partially) prepped.
* we need to keep this request in the front to
- * avoid resource deadlock. turn on softbarrier.
+ * avoid resource deadlock. REQ_STARTED will
+ * prevent other fs requests from passing this one.
*/
- rq->flags |= REQ_SOFTBARRIER;
rq = NULL;
break;
} else if (ret == BLKPREP_KILL) {
@@ -416,42 +490,32 @@
return rq;
}
-void elv_remove_request(request_queue_t *q, struct request *rq)
+void elv_dequeue_request(request_queue_t *q, struct request *rq)
{
- elevator_t *e = q->elevator;
+ BUG_ON(list_empty(&rq->queuelist));
+
+ list_del_init(&rq->queuelist);
/*
* the time frame between a request being removed from the lists
* and to it is freed is accounted as io that is in progress at
- * the driver side. note that we only account requests that the
- * driver has seen (REQ_STARTED set), to avoid false accounting
- * for request-request merges
+ * the driver side.
*/
if (blk_account_rq(rq))
q->in_flight++;
-
- /*
- * the main clearing point for q->last_merge is on retrieval of
- * request by driver (it calls elv_next_request()), but it _can_
- * also happen here if a request is added to the queue but later
- * deleted without ever being given to driver (merged with another
- * request).
- */
- if (rq == q->last_merge)
- q->last_merge = NULL;
-
- if (e->ops->elevator_remove_req_fn)
- e->ops->elevator_remove_req_fn(q, rq);
}
int elv_queue_empty(request_queue_t *q)
{
elevator_t *e = q->elevator;
+ if (!list_empty(&q->queue_head))
+ return 0;
+
if (e->ops->elevator_queue_empty_fn)
return e->ops->elevator_queue_empty_fn(q);
- return list_empty(&q->queue_head);
+ return 1;
}
struct request *elv_latter_request(request_queue_t *q, struct request *rq)
@@ -487,7 +551,7 @@
}
int elv_set_request(request_queue_t *q, struct request *rq, struct bio *bio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
elevator_t *e = q->elevator;
@@ -523,11 +587,11 @@
/*
* request is released from the driver, io must be done
*/
- if (blk_account_rq(rq))
+ if (blk_account_rq(rq)) {
q->in_flight--;
-
- if (e->ops->elevator_completed_req_fn)
- e->ops->elevator_completed_req_fn(q, rq);
+ if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn)
+ e->ops->elevator_completed_req_fn(q, rq);
+ }
}
int elv_register_queue(struct request_queue *q)
@@ -555,10 +619,9 @@
int elv_register(struct elevator_type *e)
{
+ spin_lock_irq(&elv_list_lock);
if (elevator_find(e->elevator_name))
BUG();
-
- spin_lock_irq(&elv_list_lock);
list_add_tail(&e->list, &elv_list);
spin_unlock_irq(&elv_list_lock);
@@ -572,6 +635,27 @@
void elv_unregister(struct elevator_type *e)
{
+ struct task_struct *g, *p;
+
+ /*
+ * Iterate every thread in the process to remove the io contexts.
+ */
+ read_lock(&tasklist_lock);
+ do_each_thread(g, p) {
+ struct io_context *ioc = p->io_context;
+ if (ioc && ioc->cic) {
+ ioc->cic->exit(ioc->cic);
+ ioc->cic->dtor(ioc->cic);
+ ioc->cic = NULL;
+ }
+ if (ioc && ioc->aic) {
+ ioc->aic->exit(ioc->aic);
+ ioc->aic->dtor(ioc->aic);
+ ioc->aic = NULL;
+ }
+ } while_each_thread(g, p);
+ read_unlock(&tasklist_lock);
+
spin_lock_irq(&elv_list_lock);
list_del_init(&e->list);
spin_unlock_irq(&elv_list_lock);
@@ -582,25 +666,36 @@
* switch to new_e io scheduler. be careful not to introduce deadlocks -
* we don't free the old io scheduler, before we have allocated what we
* need for the new one. this way we have a chance of going back to the old
- * one, if the new one fails init for some reason. we also do an intermediate
- * switch to noop to ensure safety with stack-allocated requests, since they
- * don't originate from the block layer allocator. noop is safe here, because
- * it never needs to touch the elevator itself for completion events. DRAIN
- * flags will make sure we don't touch it for additions either.
+ * one, if the new one fails init for some reason.
*/
static void elevator_switch(request_queue_t *q, struct elevator_type *new_e)
{
- elevator_t *e = kmalloc(sizeof(elevator_t), GFP_KERNEL);
- struct elevator_type *noop_elevator = NULL;
- elevator_t *old_elevator;
+ elevator_t *old_elevator, *e;
+ /*
+ * Allocate new elevator
+ */
+ e = kmalloc(sizeof(elevator_t), GFP_KERNEL);
if (!e)
goto error;
/*
- * first step, drain requests from the block freelist
+ * Turn on BYPASS and drain all requests w/ elevator private data
*/
- blk_wait_queue_drained(q, 0);
+ spin_lock_irq(q->queue_lock);
+
+ set_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
+
+ while (q->elevator->ops->elevator_dispatch_fn(q, 1))
+ ;
+
+ while (q->rq.elvpriv) {
+ spin_unlock_irq(q->queue_lock);
+ msleep(10);
+ spin_lock_irq(q->queue_lock);
+ }
+
+ spin_unlock_irq(q->queue_lock);
/*
* unregister old elevator data
@@ -609,18 +704,6 @@
old_elevator = q->elevator;
/*
- * next step, switch to noop since it uses no private rq structures
- * and doesn't allocate any memory for anything. then wait for any
- * non-fs requests in-flight
- */
- noop_elevator = elevator_get("noop");
- spin_lock_irq(q->queue_lock);
- elevator_attach(q, noop_elevator, e);
- spin_unlock_irq(q->queue_lock);
-
- blk_wait_queue_drained(q, 1);
-
- /*
* attach and start new elevator
*/
if (elevator_attach(q, new_e, e))
@@ -630,11 +713,10 @@
goto fail_register;
/*
- * finally exit old elevator and start queue again
+ * finally exit old elevator and turn off BYPASS.
*/
elevator_exit(old_elevator);
- blk_finish_queue_drain(q);
- elevator_put(noop_elevator);
+ clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
return;
fail_register:
@@ -643,13 +725,13 @@
* one again (along with re-adding the sysfs dir)
*/
elevator_exit(e);
+ e = NULL;
fail:
q->elevator = old_elevator;
elv_register_queue(q);
- blk_finish_queue_drain(q);
+ clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
+ kfree(e);
error:
- if (noop_elevator)
- elevator_put(noop_elevator);
elevator_put(new_e);
printk(KERN_ERR "elevator: switch to %s failed\n",new_e->elevator_name);
}
@@ -671,8 +753,10 @@
return -EINVAL;
}
- if (!strcmp(elevator_name, q->elevator->elevator_type->elevator_name))
+ if (!strcmp(elevator_name, q->elevator->elevator_type->elevator_name)) {
+ elevator_put(e);
return count;
+ }
elevator_switch(q, e);
return count;
@@ -701,11 +785,12 @@
return len;
}
+EXPORT_SYMBOL(elv_dispatch_sort);
EXPORT_SYMBOL(elv_add_request);
EXPORT_SYMBOL(__elv_add_request);
EXPORT_SYMBOL(elv_requeue_request);
EXPORT_SYMBOL(elv_next_request);
-EXPORT_SYMBOL(elv_remove_request);
+EXPORT_SYMBOL(elv_dequeue_request);
EXPORT_SYMBOL(elv_queue_empty);
EXPORT_SYMBOL(elv_completed_request);
EXPORT_SYMBOL(elevator_exit);
diff --git a/drivers/block/genhd.c b/drivers/block/genhd.c
index d42840c..486ce1f 100644
--- a/drivers/block/genhd.c
+++ b/drivers/block/genhd.c
@@ -337,10 +337,30 @@
return ret;
}
+static ssize_t disk_attr_store(struct kobject * kobj, struct attribute * attr,
+ const char *page, size_t count)
+{
+ struct gendisk *disk = to_disk(kobj);
+ struct disk_attribute *disk_attr =
+ container_of(attr,struct disk_attribute,attr);
+ ssize_t ret = 0;
+
+ if (disk_attr->store)
+ ret = disk_attr->store(disk, page, count);
+ return ret;
+}
+
static struct sysfs_ops disk_sysfs_ops = {
.show = &disk_attr_show,
+ .store = &disk_attr_store,
};
+static ssize_t disk_uevent_store(struct gendisk * disk,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&disk->kobj, KOBJ_ADD);
+ return count;
+}
static ssize_t disk_dev_read(struct gendisk * disk, char *page)
{
dev_t base = MKDEV(disk->major, disk->first_minor);
@@ -382,6 +402,10 @@
jiffies_to_msecs(disk_stat_read(disk, io_ticks)),
jiffies_to_msecs(disk_stat_read(disk, time_in_queue)));
}
+static struct disk_attribute disk_attr_uevent = {
+ .attr = {.name = "uevent", .mode = S_IWUSR },
+ .store = disk_uevent_store
+};
static struct disk_attribute disk_attr_dev = {
.attr = {.name = "dev", .mode = S_IRUGO },
.show = disk_dev_read
@@ -404,6 +428,7 @@
};
static struct attribute * default_attrs[] = {
+ &disk_attr_uevent.attr,
&disk_attr_dev.attr,
&disk_attr_range.attr,
&disk_attr_removable.attr,
diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c
index baedac5..0af7351 100644
--- a/drivers/block/ll_rw_blk.c
+++ b/drivers/block/ll_rw_blk.c
@@ -263,8 +263,6 @@
blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
blk_queue_activity_fn(q, NULL, NULL);
-
- INIT_LIST_HEAD(&q->drain_list);
}
EXPORT_SYMBOL(blk_queue_make_request);
@@ -353,6 +351,8 @@
struct request *rq = flush_rq->end_io_data;
request_queue_t *q = rq->q;
+ elv_completed_request(q, flush_rq);
+
rq->flags |= REQ_BAR_PREFLUSH;
if (!flush_rq->errors)
@@ -369,6 +369,8 @@
struct request *rq = flush_rq->end_io_data;
request_queue_t *q = rq->q;
+ elv_completed_request(q, flush_rq);
+
rq->flags |= REQ_BAR_POSTFLUSH;
q->end_flush_fn(q, flush_rq);
@@ -408,8 +410,6 @@
if (!list_empty(&rq->queuelist))
blkdev_dequeue_request(rq);
- elv_deactivate_request(q, rq);
-
flush_rq->end_io_data = rq;
flush_rq->end_io = blk_pre_flush_end_io;
@@ -1040,6 +1040,7 @@
static char *rq_flags[] = {
"REQ_RW",
"REQ_FAILFAST",
+ "REQ_SORTED",
"REQ_SOFTBARRIER",
"REQ_HARDBARRIER",
"REQ_CMD",
@@ -1047,6 +1048,7 @@
"REQ_STARTED",
"REQ_DONTPREP",
"REQ_QUEUED",
+ "REQ_ELVPRIV",
"REQ_PC",
"REQ_BLOCK_PC",
"REQ_SENSE",
@@ -1637,9 +1639,9 @@
rl->count[READ] = rl->count[WRITE] = 0;
rl->starved[READ] = rl->starved[WRITE] = 0;
+ rl->elvpriv = 0;
init_waitqueue_head(&rl->wait[READ]);
init_waitqueue_head(&rl->wait[WRITE]);
- init_waitqueue_head(&rl->drain);
rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab,
mempool_free_slab, request_cachep, q->node);
@@ -1652,13 +1654,13 @@
static int __make_request(request_queue_t *, struct bio *);
-request_queue_t *blk_alloc_queue(int gfp_mask)
+request_queue_t *blk_alloc_queue(gfp_t gfp_mask)
{
return blk_alloc_queue_node(gfp_mask, -1);
}
EXPORT_SYMBOL(blk_alloc_queue);
-request_queue_t *blk_alloc_queue_node(int gfp_mask, int node_id)
+request_queue_t *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
{
request_queue_t *q;
@@ -1782,12 +1784,14 @@
static inline void blk_free_request(request_queue_t *q, struct request *rq)
{
- elv_put_request(q, rq);
+ if (rq->flags & REQ_ELVPRIV)
+ elv_put_request(q, rq);
mempool_free(rq, q->rq.rq_pool);
}
static inline struct request *
-blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask)
+blk_alloc_request(request_queue_t *q, int rw, struct bio *bio,
+ int priv, gfp_t gfp_mask)
{
struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
@@ -1800,11 +1804,15 @@
*/
rq->flags = rw;
- if (!elv_set_request(q, rq, bio, gfp_mask))
- return rq;
+ if (priv) {
+ if (unlikely(elv_set_request(q, rq, bio, gfp_mask))) {
+ mempool_free(rq, q->rq.rq_pool);
+ return NULL;
+ }
+ rq->flags |= REQ_ELVPRIV;
+ }
- mempool_free(rq, q->rq.rq_pool);
- return NULL;
+ return rq;
}
/*
@@ -1860,22 +1868,18 @@
* A request has just been released. Account for it, update the full and
* congestion status, wake up any waiters. Called under q->queue_lock.
*/
-static void freed_request(request_queue_t *q, int rw)
+static void freed_request(request_queue_t *q, int rw, int priv)
{
struct request_list *rl = &q->rq;
rl->count[rw]--;
+ if (priv)
+ rl->elvpriv--;
__freed_request(q, rw);
if (unlikely(rl->starved[rw ^ 1]))
__freed_request(q, rw ^ 1);
-
- if (!rl->count[READ] && !rl->count[WRITE]) {
- smp_mb();
- if (unlikely(waitqueue_active(&rl->drain)))
- wake_up(&rl->drain);
- }
}
#define blkdev_free_rq(list) list_entry((list)->next, struct request, queuelist)
@@ -1885,14 +1889,12 @@
* Returns !NULL on success, with queue_lock *not held*.
*/
static struct request *get_request(request_queue_t *q, int rw, struct bio *bio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct request *rq = NULL;
struct request_list *rl = &q->rq;
struct io_context *ioc = current_io_context(GFP_ATOMIC);
-
- if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)))
- goto out;
+ int priv;
if (rl->count[rw]+1 >= q->nr_requests) {
/*
@@ -1937,9 +1939,14 @@
rl->starved[rw] = 0;
if (rl->count[rw] >= queue_congestion_on_threshold(q))
set_queue_congested(q, rw);
+
+ priv = !test_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
+ if (priv)
+ rl->elvpriv++;
+
spin_unlock_irq(q->queue_lock);
- rq = blk_alloc_request(q, rw, bio, gfp_mask);
+ rq = blk_alloc_request(q, rw, bio, priv, gfp_mask);
if (!rq) {
/*
* Allocation failed presumably due to memory. Undo anything
@@ -1949,7 +1956,7 @@
* wait queue, but this is pretty rare.
*/
spin_lock_irq(q->queue_lock);
- freed_request(q, rw);
+ freed_request(q, rw, priv);
/*
* in the very unlikely event that allocation failed and no
@@ -2019,7 +2026,7 @@
return rq;
}
-struct request *blk_get_request(request_queue_t *q, int rw, int gfp_mask)
+struct request *blk_get_request(request_queue_t *q, int rw, gfp_t gfp_mask)
{
struct request *rq;
@@ -2251,7 +2258,7 @@
* @gfp_mask: memory allocation flags
*/
int blk_rq_map_kern(request_queue_t *q, struct request *rq, void *kbuf,
- unsigned int len, unsigned int gfp_mask)
+ unsigned int len, gfp_t gfp_mask)
{
struct bio *bio;
@@ -2433,13 +2440,15 @@
{
unsigned long now = jiffies;
- __disk_stat_add(disk, time_in_queue,
- disk->in_flight * (now - disk->stamp));
- disk->stamp = now;
+ if (now == disk->stamp)
+ return;
- if (disk->in_flight)
- __disk_stat_add(disk, io_ticks, (now - disk->stamp_idle));
- disk->stamp_idle = now;
+ if (disk->in_flight) {
+ __disk_stat_add(disk, time_in_queue,
+ disk->in_flight * (now - disk->stamp));
+ __disk_stat_add(disk, io_ticks, (now - disk->stamp));
+ }
+ disk->stamp = now;
}
/*
@@ -2454,6 +2463,8 @@
if (unlikely(--req->ref_count))
return;
+ elv_completed_request(q, req);
+
req->rq_status = RQ_INACTIVE;
req->rl = NULL;
@@ -2463,26 +2474,25 @@
*/
if (rl) {
int rw = rq_data_dir(req);
-
- elv_completed_request(q, req);
+ int priv = req->flags & REQ_ELVPRIV;
BUG_ON(!list_empty(&req->queuelist));
blk_free_request(q, req);
- freed_request(q, rw);
+ freed_request(q, rw, priv);
}
}
void blk_put_request(struct request *req)
{
- /*
- * if req->rl isn't set, this request didnt originate from the
- * block layer, so it's safe to just disregard it
- */
- if (req->rl) {
- unsigned long flags;
- request_queue_t *q = req->q;
+ unsigned long flags;
+ request_queue_t *q = req->q;
+ /*
+ * Gee, IDE calls in w/ NULL q. Fix IDE and remove the
+ * following if (q) test.
+ */
+ if (q) {
spin_lock_irqsave(q->queue_lock, flags);
__blk_put_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
@@ -2797,97 +2807,6 @@
}
}
-void blk_finish_queue_drain(request_queue_t *q)
-{
- struct request_list *rl = &q->rq;
- struct request *rq;
- int requeued = 0;
-
- spin_lock_irq(q->queue_lock);
- clear_bit(QUEUE_FLAG_DRAIN, &q->queue_flags);
-
- while (!list_empty(&q->drain_list)) {
- rq = list_entry_rq(q->drain_list.next);
-
- list_del_init(&rq->queuelist);
- elv_requeue_request(q, rq);
- requeued++;
- }
-
- if (requeued)
- q->request_fn(q);
-
- spin_unlock_irq(q->queue_lock);
-
- wake_up(&rl->wait[0]);
- wake_up(&rl->wait[1]);
- wake_up(&rl->drain);
-}
-
-static int wait_drain(request_queue_t *q, struct request_list *rl, int dispatch)
-{
- int wait = rl->count[READ] + rl->count[WRITE];
-
- if (dispatch)
- wait += !list_empty(&q->queue_head);
-
- return wait;
-}
-
-/*
- * We rely on the fact that only requests allocated through blk_alloc_request()
- * have io scheduler private data structures associated with them. Any other
- * type of request (allocated on stack or through kmalloc()) should not go
- * to the io scheduler core, but be attached to the queue head instead.
- */
-void blk_wait_queue_drained(request_queue_t *q, int wait_dispatch)
-{
- struct request_list *rl = &q->rq;
- DEFINE_WAIT(wait);
-
- spin_lock_irq(q->queue_lock);
- set_bit(QUEUE_FLAG_DRAIN, &q->queue_flags);
-
- while (wait_drain(q, rl, wait_dispatch)) {
- prepare_to_wait(&rl->drain, &wait, TASK_UNINTERRUPTIBLE);
-
- if (wait_drain(q, rl, wait_dispatch)) {
- __generic_unplug_device(q);
- spin_unlock_irq(q->queue_lock);
- io_schedule();
- spin_lock_irq(q->queue_lock);
- }
-
- finish_wait(&rl->drain, &wait);
- }
-
- spin_unlock_irq(q->queue_lock);
-}
-
-/*
- * block waiting for the io scheduler being started again.
- */
-static inline void block_wait_queue_running(request_queue_t *q)
-{
- DEFINE_WAIT(wait);
-
- while (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) {
- struct request_list *rl = &q->rq;
-
- prepare_to_wait_exclusive(&rl->drain, &wait,
- TASK_UNINTERRUPTIBLE);
-
- /*
- * re-check the condition. avoids using prepare_to_wait()
- * in the fast path (queue is running)
- */
- if (test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))
- io_schedule();
-
- finish_wait(&rl->drain, &wait);
- }
-}
-
static void handle_bad_sector(struct bio *bio)
{
char b[BDEVNAME_SIZE];
@@ -2983,8 +2902,6 @@
if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
goto end_io;
- block_wait_queue_running(q);
-
/*
* If this device has partitions, remap block n
* of partition p to block n+start(p) of the disk.
@@ -3393,7 +3310,7 @@
* but since the current task itself holds a reference, the context can be
* used in general code, so long as it stays within `current` context.
*/
-struct io_context *current_io_context(int gfp_flags)
+struct io_context *current_io_context(gfp_t gfp_flags)
{
struct task_struct *tsk = current;
struct io_context *ret;
@@ -3424,7 +3341,7 @@
*
* This is always called in the context of the task which submitted the I/O.
*/
-struct io_context *get_io_context(int gfp_flags)
+struct io_context *get_io_context(gfp_t gfp_flags)
{
struct io_context *ret;
ret = current_io_context(gfp_flags);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index b35e088..96c664a 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -881,7 +881,7 @@
static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev)
{
struct file *filp = lo->lo_backing_file;
- int gfp = lo->old_gfp_mask;
+ gfp_t gfp = lo->old_gfp_mask;
if (lo->lo_state != Lo_bound)
return -ENXIO;
diff --git a/drivers/block/noop-iosched.c b/drivers/block/noop-iosched.c
index b1730b6..f56b8ed 100644
--- a/drivers/block/noop-iosched.c
+++ b/drivers/block/noop-iosched.c
@@ -7,57 +7,19 @@
#include <linux/module.h>
#include <linux/init.h>
-/*
- * See if we can find a request that this buffer can be coalesced with.
- */
-static int elevator_noop_merge(request_queue_t *q, struct request **req,
- struct bio *bio)
+static void elevator_noop_add_request(request_queue_t *q, struct request *rq)
{
- int ret;
-
- ret = elv_try_last_merge(q, bio);
- if (ret != ELEVATOR_NO_MERGE)
- *req = q->last_merge;
-
- return ret;
+ elv_dispatch_add_tail(q, rq);
}
-static void elevator_noop_merge_requests(request_queue_t *q, struct request *req,
- struct request *next)
+static int elevator_noop_dispatch(request_queue_t *q, int force)
{
- list_del_init(&next->queuelist);
-}
-
-static void elevator_noop_add_request(request_queue_t *q, struct request *rq,
- int where)
-{
- if (where == ELEVATOR_INSERT_FRONT)
- list_add(&rq->queuelist, &q->queue_head);
- else
- list_add_tail(&rq->queuelist, &q->queue_head);
-
- /*
- * new merges must not precede this barrier
- */
- if (rq->flags & REQ_HARDBARRIER)
- q->last_merge = NULL;
- else if (!q->last_merge)
- q->last_merge = rq;
-}
-
-static struct request *elevator_noop_next_request(request_queue_t *q)
-{
- if (!list_empty(&q->queue_head))
- return list_entry_rq(q->queue_head.next);
-
- return NULL;
+ return 0;
}
static struct elevator_type elevator_noop = {
.ops = {
- .elevator_merge_fn = elevator_noop_merge,
- .elevator_merge_req_fn = elevator_noop_merge_requests,
- .elevator_next_req_fn = elevator_noop_next_request,
+ .elevator_dispatch_fn = elevator_noop_dispatch,
.elevator_add_req_fn = elevator_noop_add_request,
},
.elevator_name = "noop",
diff --git a/drivers/block/paride/paride.c b/drivers/block/paride/paride.c
index 1fef136..ce94aa1 100644
--- a/drivers/block/paride/paride.c
+++ b/drivers/block/paride/paride.c
@@ -29,6 +29,7 @@
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
+#include <linux/sched.h> /* TASK_* */
#ifdef CONFIG_PARPORT_MODULE
#define CONFIG_PARPORT
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index 94af920..e9746af2 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -807,10 +807,6 @@
return 1;
spin_lock_irqsave(&pf_spin_lock, saved_flags);
pf_end_request(1);
- if (pf_req) {
- pf_count = pf_req->current_nr_sectors;
- pf_buf = pf_req->buffer;
- }
spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
return 1;
}
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index b398239..6f5df0f 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -162,6 +162,8 @@
#include <linux/mtio.h>
#include <linux/pg.h>
#include <linux/device.h>
+#include <linux/sched.h> /* current, TASK_* */
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
@@ -674,7 +676,7 @@
for (unit = 0; unit < PG_UNITS; unit++) {
struct pg *dev = &devices[unit];
if (dev->present) {
- class_device_create(pg_class, MKDEV(major, unit),
+ class_device_create(pg_class, NULL, MKDEV(major, unit),
NULL, "pg%u", unit);
err = devfs_mk_cdev(MKDEV(major, unit),
S_IFCHR | S_IRUSR | S_IWUSR, "pg/%u",
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
index d8d3523..715ae5d 100644
--- a/drivers/block/paride/pt.c
+++ b/drivers/block/paride/pt.c
@@ -146,6 +146,7 @@
#include <linux/slab.h>
#include <linux/mtio.h>
#include <linux/device.h>
+#include <linux/sched.h> /* current, TASK_*, schedule_timeout() */
#include <asm/uaccess.h>
@@ -971,7 +972,7 @@
devfs_mk_dir("pt");
for (unit = 0; unit < PT_UNITS; unit++)
if (pt[unit].present) {
- class_device_create(pt_class, MKDEV(major, unit),
+ class_device_create(pt_class, NULL, MKDEV(major, unit),
NULL, "pt%d", unit);
err = devfs_mk_cdev(MKDEV(major, unit),
S_IFCHR | S_IRUSR | S_IWUSR,
@@ -980,7 +981,7 @@
class_device_destroy(pt_class, MKDEV(major, unit));
goto out_class;
}
- class_device_create(pt_class, MKDEV(major, unit + 128),
+ class_device_create(pt_class, NULL, MKDEV(major, unit + 128),
NULL, "pt%dn", unit);
err = devfs_mk_cdev(MKDEV(major, unit + 128),
S_IFCHR | S_IRUSR | S_IWUSR,
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 145c1fb..68c60a5 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -348,7 +348,7 @@
struct block_device *bdev = inode->i_bdev;
struct address_space *mapping;
unsigned bsize;
- int gfp_mask;
+ gfp_t gfp_mask;
inode = igrab(bdev->bd_inode);
rd_bdev[unit] = bdev;
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index d57007b9..1ded3b4 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -1,7 +1,7 @@
/*
* sx8.c: Driver for Promise SATA SX8 looks-like-I2O hardware
*
- * Copyright 2004 Red Hat, Inc.
+ * Copyright 2004-2005 Red Hat, Inc.
*
* Author/maintainer: Jeff Garzik <jgarzik@pobox.com>
*
@@ -31,10 +31,6 @@
#include <asm/semaphore.h>
#include <asm/uaccess.h>
-MODULE_AUTHOR("Jeff Garzik");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Promise SATA SX8 block driver");
-
#if 0
#define CARM_DEBUG
#define CARM_VERBOSE_DEBUG
@@ -45,9 +41,35 @@
#undef CARM_NDEBUG
#define DRV_NAME "sx8"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "1.0"
#define PFX DRV_NAME ": "
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Promise SATA SX8 block driver");
+MODULE_VERSION(DRV_VERSION);
+
+/*
+ * SX8 hardware has a single message queue for all ATA ports.
+ * When this driver was written, the hardware (firmware?) would
+ * corrupt data eventually, if more than one request was outstanding.
+ * As one can imagine, having 8 ports bottlenecking on a single
+ * command hurts performance.
+ *
+ * Based on user reports, later versions of the hardware (firmware?)
+ * seem to be able to survive with more than one command queued.
+ *
+ * Therefore, we default to the safe option -- 1 command -- but
+ * allow the user to increase this.
+ *
+ * SX8 should be able to support up to ~60 queued commands (CARM_MAX_REQ),
+ * but problems seem to occur when you exceed ~30, even on newer hardware.
+ */
+static int max_queue = 1;
+module_param(max_queue, int, 0444);
+MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30, safe==1)");
+
+
#define NEXT_RESP(idx) ((idx + 1) % RMSG_Q_LEN)
/* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */
@@ -90,12 +112,10 @@
/* command message queue limits */
CARM_MAX_REQ = 64, /* max command msgs per host */
- CARM_MAX_Q = 1, /* one command at a time */
CARM_MSG_LOW_WATER = (CARM_MAX_REQ / 4), /* refill mark */
/* S/G limits, host-wide and per-request */
CARM_MAX_REQ_SG = 32, /* max s/g entries per request */
- CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */
CARM_MAX_HOST_SG = 600, /* max s/g entries per host */
CARM_SG_LOW_WATER = (CARM_MAX_HOST_SG / 4), /* re-fill mark */
@@ -181,6 +201,10 @@
FL_DYN_MAJOR = (1 << 17),
};
+enum {
+ CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */
+};
+
enum scatter_gather_types {
SGT_32BIT = 0,
SGT_64BIT = 1,
@@ -218,7 +242,6 @@
struct carm_port {
unsigned int port_no;
- unsigned int n_queued;
struct gendisk *disk;
struct carm_host *host;
@@ -448,7 +471,7 @@
for (i = 0; i < ARRAY_SIZE(msg_sizes); i++)
if (msg_size <= msg_sizes[i])
return i;
-
+
return -ENOENT;
}
@@ -509,7 +532,7 @@
if (host->hw_sg_used >= (CARM_MAX_HOST_SG - CARM_MAX_REQ_SG))
return NULL;
- for (i = 0; i < CARM_MAX_Q; i++)
+ for (i = 0; i < max_queue; i++)
if ((host->msg_alloc & (1ULL << i)) == 0) {
struct carm_request *crq = &host->req[i];
crq->port = NULL;
@@ -521,14 +544,14 @@
assert(host->n_msgs <= CARM_MAX_REQ);
return crq;
}
-
+
DPRINTK("no request available, returning NULL\n");
return NULL;
}
static int carm_put_request(struct carm_host *host, struct carm_request *crq)
{
- assert(crq->tag < CARM_MAX_Q);
+ assert(crq->tag < max_queue);
if (unlikely((host->msg_alloc & (1ULL << crq->tag)) == 0))
return -EINVAL; /* tried to clear a tag that was not active */
@@ -791,7 +814,7 @@
int is_ok)
{
carm_end_request_queued(host, crq, is_ok);
- if (CARM_MAX_Q == 1)
+ if (max_queue == 1)
carm_round_robin(host);
else if ((host->n_msgs <= CARM_MSG_LOW_WATER) &&
(host->hw_sg_used <= CARM_SG_LOW_WATER)) {
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index ed4d500..bfb23d5 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1512,7 +1512,7 @@
scmd->nsg = 1;
sg = &scmd->sgv[0];
sg->page = virt_to_page(sc->top_sense);
- sg->offset = (unsigned int)sc->top_sense & (PAGE_SIZE-1);
+ sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1);
sg->length = UB_SENSE_SIZE;
scmd->len = UB_SENSE_SIZE;
scmd->lun = cmd->lun;
@@ -1891,7 +1891,7 @@
cmd->nsg = 1;
sg = &cmd->sgv[0];
sg->page = virt_to_page(p);
- sg->offset = (unsigned int)p & (PAGE_SIZE-1);
+ sg->offset = (unsigned long)p & (PAGE_SIZE-1);
sg->length = 8;
cmd->len = 8;
cmd->lun = lun;
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 543f93e..b9fbe6e 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -55,14 +55,6 @@
Say Y here to compile support for HCI BCSP protocol.
-config BT_HCIUART_BCSP_TXCRC
- bool "Transmit CRC with every BCSP packet"
- depends on BT_HCIUART_BCSP
- help
- If you say Y here, a 16-bit CRC checksum will be transmitted along with
- every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip.
- This increases reliability, but slightly reduces efficiency.
-
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index 4fa8523..0db0400 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -550,6 +550,9 @@
if (ignore)
return -ENODEV;
+ if (intf->cur_altsetting->desc.bInterfaceNumber > 0)
+ return -ENODEV;
+
data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
BT_ERR("Can't allocate data structure");
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 0ee324e..0a47614 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -1,35 +1,27 @@
-/*
- BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ).
- Copyright 2002 by Fabrizio Gennari <fabrizio.gennari@philips.com>
-
- Based on
- hci_h4.c by Maxim Krasnyansky <maxk@qualcomm.com>
- ABCSP by Carl Orsborn <cjo@csr.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $
+ *
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2002-2003 Fabrizio Gennari <fabrizio.gennari@philips.com>
+ * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#define VERSION "0.2"
-
#include <linux/config.h>
#include <linux/module.h>
@@ -52,16 +44,56 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
+
#include "hci_uart.h"
-#include "hci_bcsp.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
+#define VERSION "0.3"
+
+static int txcrc = 1;
static int hciextn = 1;
+#define BCSP_TXWINSIZE 4
+
+#define BCSP_ACK_PKT 0x05
+#define BCSP_LE_PKT 0x06
+
+struct bcsp_struct {
+ struct sk_buff_head unack; /* Unack'ed packets queue */
+ struct sk_buff_head rel; /* Reliable packets queue */
+ struct sk_buff_head unrel; /* Unreliable packets queue */
+
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ u8 rxseq_txack; /* rxseq == txack. */
+ u8 rxack; /* Last packet sent by us that the peer ack'ed */
+ struct timer_list tbcsp;
+
+ enum {
+ BCSP_W4_PKT_DELIMITER,
+ BCSP_W4_PKT_START,
+ BCSP_W4_BCSP_HDR,
+ BCSP_W4_DATA,
+ BCSP_W4_CRC
+ } rx_state;
+
+ enum {
+ BCSP_ESCSTATE_NOESC,
+ BCSP_ESCSTATE_ESC
+ } rx_esc_state;
+
+ u8 use_crc;
+ u16 message_crc;
+ u8 txack_req; /* Do we need to send ack's to the peer? */
+
+ /* Reliable packet sequence number - used to assign seq to each rel pkt. */
+ u8 msgq_txseq;
+};
+
/* ---- BCSP CRC calculation ---- */
/* Table for calculating CRC for polynomial 0x1021, LSB processed first,
@@ -111,6 +143,7 @@
rev |= (crc & 1);
crc = crc >> 1;
}
+
return (rev);
}
@@ -119,6 +152,7 @@
static void bcsp_slip_msgdelim(struct sk_buff *skb)
{
const char pkt_delim = 0xc0;
+
memcpy(skb_put(skb, 1), &pkt_delim, 1);
}
@@ -173,11 +207,8 @@
{
struct sk_buff *nskb;
u8 hdr[4], chan;
- int rel, i;
-
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
u16 BCSP_CRC_INIT(bcsp_txmsg_crc);
-#endif
+ int rel, i;
switch (pkt_type) {
case HCI_ACLDATA_PKT:
@@ -240,9 +271,9 @@
BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq);
bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07;
}
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- hdr[0] |= 0x40;
-#endif
+
+ if (bcsp->use_crc)
+ hdr[0] |= 0x40;
hdr[1] = ((len << 4) & 0xff) | chan;
hdr[2] = len >> 4;
@@ -251,25 +282,25 @@
/* Put BCSP header */
for (i = 0; i < 4; i++) {
bcsp_slip_one_byte(nskb, hdr[i]);
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
-#endif
+
+ if (bcsp->use_crc)
+ bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
}
/* Put payload */
for (i = 0; i < len; i++) {
bcsp_slip_one_byte(nskb, data[i]);
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
-#endif
+
+ if (bcsp->use_crc)
+ bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
}
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
/* Put CRC */
- bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc);
- bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
- bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
-#endif
+ if (bcsp->use_crc) {
+ bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc);
+ bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
+ bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
+ }
bcsp_slip_msgdelim(nskb);
return nskb;
@@ -317,7 +348,6 @@
spin_unlock_irqrestore(&bcsp->unack.lock, flags);
-
/* We could not send a reliable packet, either because there are
none or because there are too many unack'ed pkts. Did we receive
any packets we have not acknowledged yet ? */
@@ -363,7 +393,7 @@
BT_ERR("Peer acked invalid packet");
BT_DBG("Removing %u pkts out of %u, up to seqno %u",
- pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07);
+ pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07);
for (i = 0, skb = ((struct sk_buff *) &bcsp->unack)->next; i < pkts_to_be_removed
&& skb != (struct sk_buff *) &bcsp->unack; i++) {
@@ -374,8 +404,10 @@
kfree_skb(skb);
skb = nskb;
}
+
if (bcsp->unack.qlen == 0)
del_timer(&bcsp->tbcsp);
+
spin_unlock_irqrestore(&bcsp->unack.lock, flags);
if (i != pkts_to_be_removed)
@@ -530,6 +562,7 @@
hci_recv_frame(bcsp->rx_skb);
}
+
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
bcsp->rx_skb = NULL;
}
@@ -598,8 +631,8 @@
BT_ERR ("Checksum failed: computed %04x received %04x",
bcsp_crc_reverse(bcsp->message_crc),
- (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) +
- bcsp->rx_skb->data[bcsp->rx_skb->len - 1]);
+ (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) +
+ bcsp->rx_skb->data[bcsp->rx_skb->len - 1]);
kfree_skb(bcsp->rx_skb);
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@@ -633,7 +666,7 @@
bcsp->rx_count = 4;
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
BCSP_CRC_INIT(bcsp->message_crc);
-
+
/* Do not increment ptr or decrement count
* Allocate packet. Max len of a BCSP pkt=
* 0xFFF (payload) +4 (header) +2 (crc) */
@@ -698,6 +731,9 @@
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+ if (txcrc)
+ bcsp->use_crc = 1;
+
return 0;
}
@@ -718,18 +754,19 @@
}
static struct hci_uart_proto bcsp = {
- .id = HCI_UART_BCSP,
- .open = bcsp_open,
- .close = bcsp_close,
- .enqueue = bcsp_enqueue,
- .dequeue = bcsp_dequeue,
- .recv = bcsp_recv,
- .flush = bcsp_flush
+ .id = HCI_UART_BCSP,
+ .open = bcsp_open,
+ .close = bcsp_close,
+ .enqueue = bcsp_enqueue,
+ .dequeue = bcsp_dequeue,
+ .recv = bcsp_recv,
+ .flush = bcsp_flush
};
int bcsp_init(void)
{
int err = hci_uart_register_proto(&bcsp);
+
if (!err)
BT_INFO("HCI BCSP protocol initialized");
else
@@ -743,5 +780,8 @@
return hci_uart_unregister_proto(&bcsp);
}
+module_param(txcrc, bool, 0644);
+MODULE_PARM_DESC(txcrc, "Transmit CRC with every BCSP packet");
+
module_param(hciextn, bool, 0644);
MODULE_PARM_DESC(hciextn, "Convert HCI Extensions into BCSP packets");
diff --git a/drivers/bluetooth/hci_bcsp.h b/drivers/bluetooth/hci_bcsp.h
deleted file mode 100644
index a2b3bb9..0000000
--- a/drivers/bluetooth/hci_bcsp.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ).
- Copyright 2002 by Fabrizio Gennari <fabrizio.gennari@philips.com>
-
- Based on
- hci_h4.c by Maxim Krasnyansky <maxk@qualcomm.com>
- ABCSP by Carl Orsborn <cjo@csr.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-/*
- * $Id: hci_bcsp.h,v 1.2 2002/09/26 05:05:14 maxk Exp $
- */
-
-#ifndef __HCI_BCSP_H__
-#define __HCI_BCSP_H__
-
-#define BCSP_TXWINSIZE 4
-
-#define BCSP_ACK_PKT 0x05
-#define BCSP_LE_PKT 0x06
-
-struct bcsp_struct {
- struct sk_buff_head unack; /* Unack'ed packets queue */
- struct sk_buff_head rel; /* Reliable packets queue */
- struct sk_buff_head unrel; /* Unreliable packets queue */
-
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- u8 rxseq_txack; /* rxseq == txack. */
- u8 rxack; /* Last packet sent by us that the peer ack'ed */
- struct timer_list tbcsp;
-
- enum {
- BCSP_W4_PKT_DELIMITER,
- BCSP_W4_PKT_START,
- BCSP_W4_BCSP_HDR,
- BCSP_W4_DATA,
- BCSP_W4_CRC
- } rx_state;
-
- enum {
- BCSP_ESCSTATE_NOESC,
- BCSP_ESCSTATE_ESC
- } rx_esc_state;
-
- u16 message_crc;
- u8 txack_req; /* Do we need to send ack's to the peer? */
-
- /* Reliable packet sequence number - used to assign seq to each rel pkt. */
- u8 msgq_txseq;
-};
-
-#endif /* __HCI_BCSP_H__ */
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index cf8a22d..12e369a 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -1,33 +1,27 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * Bluetooth HCI UART(H4) protocol.
*
- * $Id: hci_h4.c,v 1.3 2002/09/09 01:17:32 maxk Exp $
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#define VERSION "1.2"
#include <linux/config.h>
#include <linux/module.h>
@@ -51,24 +45,41 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
+
#include "hci_uart.h"
-#include "hci_h4.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
+#define VERSION "1.2"
+
+struct h4_struct {
+ unsigned long rx_state;
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+};
+
+/* H4 receiver States */
+#define H4_W4_PACKET_TYPE 0
+#define H4_W4_EVENT_HDR 1
+#define H4_W4_ACL_HDR 2
+#define H4_W4_SCO_HDR 3
+#define H4_W4_DATA 4
+
/* Initialize protocol */
static int h4_open(struct hci_uart *hu)
{
struct h4_struct *h4;
-
+
BT_DBG("hu %p", hu);
-
+
h4 = kmalloc(sizeof(*h4), GFP_ATOMIC);
if (!h4)
return -ENOMEM;
+
memset(h4, 0, sizeof(*h4));
skb_queue_head_init(&h4->txq);
@@ -83,7 +94,9 @@
struct h4_struct *h4 = hu->priv;
BT_DBG("hu %p", hu);
+
skb_queue_purge(&h4->txq);
+
return 0;
}
@@ -91,16 +104,19 @@
static int h4_close(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
+
hu->priv = NULL;
BT_DBG("hu %p", hu);
skb_queue_purge(&h4->txq);
+
if (h4->rx_skb)
kfree_skb(h4->rx_skb);
hu->priv = NULL;
kfree(h4);
+
return 0;
}
@@ -114,6 +130,7 @@
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
skb_queue_tail(&h4->txq, skb);
+
return 0;
}
@@ -122,6 +139,7 @@
register int room = skb_tailroom(h4->rx_skb);
BT_DBG("len %d room %d", len, room);
+
if (!len) {
hci_recv_frame(h4->rx_skb);
} else if (len > room) {
@@ -136,6 +154,7 @@
h4->rx_state = H4_W4_PACKET_TYPE;
h4->rx_skb = NULL;
h4->rx_count = 0;
+
return 0;
}
@@ -228,6 +247,7 @@
ptr++; count--;
continue;
};
+
ptr++; count--;
/* Allocate packet */
@@ -238,9 +258,11 @@
h4->rx_count = 0;
return 0;
}
+
h4->rx_skb->dev = (void *) hu->hdev;
bt_cb(h4->rx_skb)->pkt_type = type;
}
+
return count;
}
@@ -251,23 +273,24 @@
}
static struct hci_uart_proto h4p = {
- .id = HCI_UART_H4,
- .open = h4_open,
- .close = h4_close,
- .recv = h4_recv,
- .enqueue = h4_enqueue,
- .dequeue = h4_dequeue,
- .flush = h4_flush,
+ .id = HCI_UART_H4,
+ .open = h4_open,
+ .close = h4_close,
+ .recv = h4_recv,
+ .enqueue = h4_enqueue,
+ .dequeue = h4_dequeue,
+ .flush = h4_flush,
};
-
+
int h4_init(void)
{
int err = hci_uart_register_proto(&h4p);
+
if (!err)
BT_INFO("HCI H4 protocol initialized");
else
BT_ERR("HCI H4 protocol registration failed");
-
+
return err;
}
diff --git a/drivers/bluetooth/hci_h4.h b/drivers/bluetooth/hci_h4.h
deleted file mode 100644
index b95ff54..0000000
--- a/drivers/bluetooth/hci_h4.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-/*
- * $Id: hci_h4.h,v 1.2 2002/09/09 01:17:32 maxk Exp $
- */
-
-#ifdef __KERNEL__
-struct h4_struct {
- unsigned long rx_state;
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- struct sk_buff_head txq;
-};
-
-/* H4 receiver States */
-#define H4_W4_PACKET_TYPE 0
-#define H4_W4_EVENT_HDR 1
-#define H4_W4_ACL_HDR 2
-#define H4_W4_SCO_HDR 3
-#define H4_W4_DATA 4
-
-#endif /* __KERNEL__ */
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index aed80cc..4a775f6 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -1,33 +1,27 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * Bluetooth HCI UART driver.
*
- * $Id: hci_ldisc.c,v 1.5 2002/10/02 18:37:20 maxk Exp $
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#define VERSION "2.1"
#include <linux/config.h>
#include <linux/module.h>
@@ -59,6 +53,8 @@
#define BT_DBG( A... )
#endif
+#define VERSION "2.2"
+
static int reset = 0;
static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
@@ -72,6 +68,7 @@
return -EEXIST;
hup[p->id] = p;
+
return 0;
}
@@ -84,6 +81,7 @@
return -EINVAL;
hup[p->id] = NULL;
+
return 0;
}
@@ -91,13 +89,14 @@
{
if (id >= HCI_UART_MAX_PROTO)
return NULL;
+
return hup[id];
}
static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
{
struct hci_dev *hdev = hu->hdev;
-
+
/* Update HCI stat counters */
switch (pkt_type) {
case HCI_COMMAND_PKT:
@@ -117,10 +116,12 @@
static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
{
struct sk_buff *skb = hu->tx_skb;
+
if (!skb)
skb = hu->proto->dequeue(hu);
else
hu->tx_skb = NULL;
+
return skb;
}
@@ -129,7 +130,7 @@
struct tty_struct *tty = hu->tty;
struct hci_dev *hdev = hu->hdev;
struct sk_buff *skb;
-
+
if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
return 0;
@@ -142,7 +143,7 @@
while ((skb = hci_uart_dequeue(hu))) {
int len;
-
+
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
len = tty->driver->write(tty, skb->data, skb->len);
hdev->stat.byte_tx += len;
@@ -152,11 +153,11 @@
hu->tx_skb = skb;
break;
}
-
+
hci_uart_tx_complete(hu, bt_cb(skb)->pkt_type);
kfree_skb(skb);
- }
-
+ }
+
if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state))
goto restart;
@@ -173,6 +174,7 @@
/* Nothing to do for UART driver */
set_bit(HCI_RUNNING, &hdev->flags);
+
return 0;
}
@@ -234,6 +236,7 @@
hu->proto->enqueue(hu, skb);
hci_uart_tx_wakeup(hu);
+
return 0;
}
@@ -241,7 +244,8 @@
{
struct hci_uart *hu;
- if (!hdev) return;
+ if (!hdev)
+ return;
BT_DBG("%s", hdev->name);
@@ -272,6 +276,7 @@
BT_ERR("Can't allocate controll structure");
return -ENFILE;
}
+
memset(hu, 0, sizeof(struct hci_uart));
tty->disc_data = hu;
@@ -280,8 +285,10 @@
spin_lock_init(&hu->rx_lock);
/* Flush any pending characters in the driver and line discipline. */
+
/* FIXME: why is this needed. Note don't use ldisc_ref here as the
open path is before the ldisc is referencable */
+
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
@@ -372,13 +379,13 @@
static void hci_uart_tty_receive(struct tty_struct *tty, const __u8 *data, char *flags, int count)
{
struct hci_uart *hu = (void *)tty->disc_data;
-
+
if (!hu || tty != hu->tty)
return;
if (!test_bit(HCI_UART_PROTO_SET, &hu->flags))
return;
-
+
spin_lock(&hu->rx_lock);
hu->proto->recv(hu, (void *) data, count);
hu->hdev->stat.byte_rx += count;
@@ -429,8 +436,8 @@
static int hci_uart_set_proto(struct hci_uart *hu, int id)
{
struct hci_uart_proto *p;
- int err;
-
+ int err;
+
p = hci_uart_get_proto(id);
if (!p)
return -EPROTONOSUPPORT;
@@ -446,6 +453,7 @@
p->close(hu);
return err;
}
+
return 0;
}
@@ -463,7 +471,7 @@
* Return Value: Command dependent
*/
static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
struct hci_uart *hu = (void *)tty->disc_data;
int err = 0;
@@ -483,14 +491,14 @@
return err;
}
tty->low_latency = 1;
- } else
+ } else
return -EBUSY;
case HCIUARTGETPROTO:
if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
return hu->proto->id;
return -EUNATCH;
-
+
default:
err = n_tty_ioctl(tty, file, cmd, arg);
break;
@@ -502,27 +510,23 @@
/*
* We don't provide read/write/poll interface for user space.
*/
-static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, unsigned char __user *buf, size_t nr)
-{
- return 0;
-}
-static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count)
-{
- return 0;
-}
-static unsigned int hci_uart_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait)
+static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
+ unsigned char __user *buf, size_t nr)
{
return 0;
}
-#ifdef CONFIG_BT_HCIUART_H4
-int h4_init(void);
-int h4_deinit(void);
-#endif
-#ifdef CONFIG_BT_HCIUART_BCSP
-int bcsp_init(void);
-int bcsp_deinit(void);
-#endif
+static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
+ const unsigned char *data, size_t count)
+{
+ return 0;
+}
+
+static unsigned int hci_uart_tty_poll(struct tty_struct *tty,
+ struct file *filp, poll_table *wait)
+{
+ return 0;
+}
static int __init hci_uart_init(void)
{
@@ -534,18 +538,18 @@
/* Register the tty discipline */
memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
- hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
- hci_uart_ldisc.name = "n_hci";
- hci_uart_ldisc.open = hci_uart_tty_open;
- hci_uart_ldisc.close = hci_uart_tty_close;
- hci_uart_ldisc.read = hci_uart_tty_read;
- hci_uart_ldisc.write = hci_uart_tty_write;
- hci_uart_ldisc.ioctl = hci_uart_tty_ioctl;
- hci_uart_ldisc.poll = hci_uart_tty_poll;
- hci_uart_ldisc.receive_room= hci_uart_tty_room;
- hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
- hci_uart_ldisc.write_wakeup= hci_uart_tty_wakeup;
- hci_uart_ldisc.owner = THIS_MODULE;
+ hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
+ hci_uart_ldisc.name = "n_hci";
+ hci_uart_ldisc.open = hci_uart_tty_open;
+ hci_uart_ldisc.close = hci_uart_tty_close;
+ hci_uart_ldisc.read = hci_uart_tty_read;
+ hci_uart_ldisc.write = hci_uart_tty_write;
+ hci_uart_ldisc.ioctl = hci_uart_tty_ioctl;
+ hci_uart_ldisc.poll = hci_uart_tty_poll;
+ hci_uart_ldisc.receive_room = hci_uart_tty_room;
+ hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
+ hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup;
+ hci_uart_ldisc.owner = THIS_MODULE;
if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
BT_ERR("HCI line discipline registration failed. (%d)", err);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 0a57d727..b250e67 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -1,32 +1,29 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * $Id: hci_uart.h,v 1.2 2002/09/09 01:17:32 maxk Exp $
+ *
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#ifndef N_HCI
+#ifndef N_HCI
#define N_HCI 15
#endif
@@ -42,7 +39,6 @@
#define HCI_UART_3WIRE 2
#define HCI_UART_H4DS 3
-#ifdef __KERNEL__
struct hci_uart;
struct hci_uart_proto {
@@ -56,27 +52,35 @@
};
struct hci_uart {
- struct tty_struct *tty;
- struct hci_dev *hdev;
- unsigned long flags;
+ struct tty_struct *tty;
+ struct hci_dev *hdev;
+ unsigned long flags;
- struct hci_uart_proto *proto;
- void *priv;
-
- struct sk_buff *tx_skb;
- unsigned long tx_state;
- spinlock_t rx_lock;
+ struct hci_uart_proto *proto;
+ void *priv;
+
+ struct sk_buff *tx_skb;
+ unsigned long tx_state;
+ spinlock_t rx_lock;
};
/* HCI_UART flag bits */
-#define HCI_UART_PROTO_SET 0
+#define HCI_UART_PROTO_SET 0
/* TX states */
-#define HCI_UART_SENDING 1
-#define HCI_UART_TX_WAKEUP 2
+#define HCI_UART_SENDING 1
+#define HCI_UART_TX_WAKEUP 2
int hci_uart_register_proto(struct hci_uart_proto *p);
int hci_uart_unregister_proto(struct hci_uart_proto *p);
int hci_uart_tx_wakeup(struct hci_uart *hu);
-#endif /* __KERNEL__ */
+#ifdef CONFIG_BT_HCIUART_H4
+int h4_init(void);
+int h4_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_BCSP
+int bcsp_init(void);
+int bcsp_deinit(void);
+#endif
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index c29365d..fdf4370 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -661,7 +661,7 @@
config NVRAM
tristate "/dev/nvram support"
- depends on ATARI || X86 || X86_64 || ARM || GENERIC_NVRAM
+ depends on ATARI || X86 || ARM || GENERIC_NVRAM
---help---
If you say Y here and create a character special file /dev/nvram
with major number 10 and minor number 144 using mknod ("man mknod"),
@@ -985,7 +985,7 @@
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86_64 || X86 || IA64 || PPC64 || ARCH_S390
+ depends on X86 || IA64 || PPC64 || ARCH_S390
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
@@ -1001,5 +1001,17 @@
source "drivers/char/tpm/Kconfig"
+config TELCLOCK
+ tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+ depends on EXPERIMENTAL
+ default n
+ help
+ The telecom clock device is specific to the MPBL0010 ATCA computer and
+ allows direct userspace access to the configuration of the telecom clock
+ configuration settings. This device is used for hardware synchronization
+ across the ATCA backplane fabric. Upon loading, the driver exports a
+ sysfs directory, /sys/devices/platform/telco_clock, with a number of
+ files for controlling the behavior of this hardware.
+
endmenu
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 08f6928..4aeae68 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -82,6 +82,7 @@
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
+obj-$(CONFIG_TELCLOCK) += tlclk.o
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MWAVE) += mwave/
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 7f8c1b5..486ed8a 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -27,7 +27,7 @@
config AGP_ALI
tristate "ALI chipset support"
- depends on AGP && X86 && !X86_64
+ depends on AGP && X86_32
---help---
This option gives you AGP support for the GLX component of
XFree86 4.x on the following ALi chipsets. The supported chipsets
@@ -45,7 +45,7 @@
config AGP_ATI
tristate "ATI chipset support"
- depends on AGP && X86 && !X86_64
+ depends on AGP && X86_32
---help---
This option gives you AGP support for the GLX component of
XFree86 4.x on the ATI RadeonIGP family of chipsets.
@@ -55,7 +55,7 @@
config AGP_AMD
tristate "AMD Irongate, 761, and 762 chipset support"
- depends on AGP && X86 && !X86_64
+ depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
XFree86 4.x on AMD Irongate, 761, and 762 chipsets.
@@ -91,7 +91,7 @@
config AGP_NVIDIA
tristate "NVIDIA nForce/nForce2 chipset support"
- depends on AGP && X86 && !X86_64
+ depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
XFree86 4.x on the following NVIDIA chipsets. The supported chipsets
@@ -99,7 +99,7 @@
config AGP_SIS
tristate "SiS chipset support"
- depends on AGP && X86 && !X86_64
+ depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
XFree86 4.x on Silicon Integrated Systems [SiS] chipsets.
@@ -111,14 +111,14 @@
config AGP_SWORKS
tristate "Serverworks LE/HE chipset support"
- depends on AGP && X86 && !X86_64
+ depends on AGP && X86_32
help
Say Y here to support the Serverworks AGP card. See
<http://www.serverworks.com/> for product descriptions and images.
config AGP_VIA
tristate "VIA chipset support"
- depends on AGP && X86 && !X86_64
+ depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
XFree86 4.x on VIA MVP3/Apollo Pro chipsets.
@@ -154,7 +154,7 @@
config AGP_EFFICEON
tristate "Transmeta Efficeon support"
- depends on AGP && X86 && !X86_64
+ depends on AGP && X86_32
help
This option gives you AGP support for the Transmeta Efficeon
series processors with integrated northbridges.
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index 9c9c9c2..b02fc22 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -7,6 +7,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
+#include <asm/page.h> /* PAGE_SIZE */
#include "agp.h"
#define ALI_AGPCTRL 0xb8
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 0a7624a..0e6c3a3 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -13,6 +13,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
+#include <asm/page.h> /* PAGE_SIZE */
#include "agp.h"
/* Will need to be increased if AMD64 ever goes >8-way. */
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index e572ced..0b6e726 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -6,6 +6,8 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/agp_backend.h>
#include <asm/agp.h>
#include "agp.h"
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index 9494329..a2d9e5e 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -10,6 +10,8 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/agp_backend.h>
#include "agp.h"
diff --git a/drivers/char/agp/isoch.c b/drivers/char/agp/isoch.c
index c9ac731..4008324 100644
--- a/drivers/char/agp/isoch.c
+++ b/drivers/char/agp/isoch.c
@@ -6,6 +6,7 @@
#include <linux/pci.h>
#include <linux/agp_backend.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "agp.h"
diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c
index d3aa159..7957fc9 100644
--- a/drivers/char/agp/sgi-agp.c
+++ b/drivers/char/agp/sgi-agp.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/agp_backend.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioca_provider.h>
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index a9fb12c..71ea59a 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -5,6 +5,8 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/agp_backend.h>
#include "agp.h"
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index cf4c364..c7f818c 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -281,7 +281,7 @@
* make sure "cyc" appears in all kernel messages; all soft interrupts
* handled by same routine; recognize out-of-band reception; comment
* out some diagnostic messages; leave RTS/CTS flow control to hardware;
- * fix race condition in -Z buffer management; only -Y needs to explictly
+ * fix race condition in -Z buffer management; only -Y needs to explicitly
* flush chars; tidy up some startup messages;
*
* Revision 1.36.4.18 1996/07/25 18:57:31 bentson
diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c
index 475cc5e..6d34497 100644
--- a/drivers/char/drm/drm_sysfs.c
+++ b/drivers/char/drm/drm_sysfs.c
@@ -15,6 +15,8 @@
#include <linux/device.h>
#include <linux/kdev_t.h>
#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/string.h>
#include "drm_core.h"
#include "drmP.h"
diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c
index 26271e3..8693835 100644
--- a/drivers/char/dsp56k.c
+++ b/drivers/char/dsp56k.c
@@ -515,7 +515,7 @@
err = PTR_ERR(dsp56k_class);
goto out_chrdev;
}
- class_device_create(dsp56k_class, MKDEV(DSP56K_MAJOR, 0), NULL, "dsp56k");
+ class_device_create(dsp56k_class, NULL, MKDEV(DSP56K_MAJOR, 0), NULL, "dsp56k");
err = devfs_mk_cdev(MKDEV(DSP56K_MAJOR, 0),
S_IFCHR | S_IRUSR | S_IWUSR, "dsp56k");
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 407708a..b7a0e4d 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -3113,6 +3113,7 @@
int __init init_PCI (void)
{ /* Begin init_PCI */
memset (&epca_driver, 0, sizeof (epca_driver));
+ epca_driver.owner = THIS_MODULE;
epca_driver.name = "epca";
epca_driver.id_table = epca_pci_tbl;
epca_driver.probe = epca_init_one;
diff --git a/drivers/char/ftape/zftape/zftape-init.c b/drivers/char/ftape/zftape/zftape-init.c
index 5745b74..821357c 100644
--- a/drivers/char/ftape/zftape/zftape-init.c
+++ b/drivers/char/ftape/zftape/zftape-init.c
@@ -331,27 +331,27 @@
zft_class = class_create(THIS_MODULE, "zft");
for (i = 0; i < 4; i++) {
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i),
S_IFCHR | S_IRUSR | S_IWUSR,
"qft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 4),
S_IFCHR | S_IRUSR | S_IWUSR,
"nqft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 16),
S_IFCHR | S_IRUSR | S_IWUSR,
"zqft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 20),
S_IFCHR | S_IRUSR | S_IWUSR,
"nzqft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 32),
S_IFCHR | S_IRUSR | S_IWUSR,
"rawqft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 36),
S_IFCHR | S_IRUSR | S_IWUSR,
"nrawqft%i", i);
diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c
index a54bc93..66e53dd 100644
--- a/drivers/char/hangcheck-timer.c
+++ b/drivers/char/hangcheck-timer.c
@@ -117,7 +117,7 @@
__setup("hcheck_dump_tasks", hangcheck_parse_dump_tasks);
#endif /* not MODULE */
-#if defined(CONFIG_X86) || defined(CONFIG_X86_64)
+#if defined(CONFIG_X86)
# define HAVE_MONOTONIC
# define TIMER_FREQ 1000000000ULL
#elif defined(CONFIG_ARCH_S390)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index c055bb6..3808d95 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -49,7 +49,9 @@
#define HPET_USER_FREQ (64)
#define HPET_DRIFT (500)
-static u32 hpet_ntimer, hpet_nhpet, hpet_max_freq = HPET_USER_FREQ;
+#define HPET_RANGE_SIZE 1024 /* from HPET spec */
+
+static u32 hpet_nhpet, hpet_max_freq = HPET_USER_FREQ;
/* A lock for concurrent access by app and isr hpet activity. */
static DEFINE_SPINLOCK(hpet_lock);
@@ -78,7 +80,7 @@
struct hpet __iomem *hp_hpet;
unsigned long hp_hpet_phys;
struct time_interpolator *hp_interpolator;
- unsigned long hp_period;
+ unsigned long long hp_tick_freq;
unsigned long hp_delta;
unsigned int hp_ntimer;
unsigned int hp_which;
@@ -90,6 +92,7 @@
#define HPET_OPEN 0x0001
#define HPET_IE 0x0002 /* interrupt enabled */
#define HPET_PERIODIC 0x0004
+#define HPET_SHARED_IRQ 0x0008
#if BITS_PER_LONG == 64
#define write_counter(V, MC) writeq(V, MC)
@@ -120,6 +123,11 @@
unsigned long isr;
devp = data;
+ isr = 1 << (devp - devp->hd_hpets->hp_dev);
+
+ if ((devp->hd_flags & HPET_SHARED_IRQ) &&
+ !(isr & readl(&devp->hd_hpet->hpet_isr)))
+ return IRQ_NONE;
spin_lock(&hpet_lock);
devp->hd_irqdata++;
@@ -137,8 +145,8 @@
&devp->hd_timer->hpet_compare);
}
- isr = (1 << (devp - devp->hd_hpets->hp_dev));
- writeq(isr, &devp->hd_hpet->hpet_isr);
+ if (devp->hd_flags & HPET_SHARED_IRQ)
+ writel(isr, &devp->hd_hpet->hpet_isr);
spin_unlock(&hpet_lock);
spin_lock(&hpet_task_lock);
@@ -276,7 +284,8 @@
if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT,
PAGE_SIZE, vma->vm_page_prot)) {
- printk(KERN_ERR "remap_pfn_range failed in hpet.c\n");
+ printk(KERN_ERR "%s: io_remap_pfn_range failed\n",
+ __FUNCTION__);
return -EAGAIN;
}
@@ -364,7 +373,9 @@
hpet = devp->hd_hpet;
hpetp = devp->hd_hpets;
- v = readq(&timer->hpet_config);
+ if (!devp->hd_ireqfreq)
+ return -EIO;
+
spin_lock_irq(&hpet_lock);
if (devp->hd_flags & HPET_IE) {
@@ -373,16 +384,21 @@
}
devp->hd_flags |= HPET_IE;
+
+ if (readl(&timer->hpet_config) & Tn_INT_TYPE_CNF_MASK)
+ devp->hd_flags |= HPET_SHARED_IRQ;
spin_unlock_irq(&hpet_lock);
- t = readq(&timer->hpet_config);
irq = devp->hd_hdwirq;
if (irq) {
- sprintf(devp->hd_name, "hpet%d", (int)(devp - hpetp->hp_dev));
+ unsigned long irq_flags;
- if (request_irq
- (irq, hpet_interrupt, SA_INTERRUPT, devp->hd_name, (void *)devp)) {
+ sprintf(devp->hd_name, "hpet%d", (int)(devp - hpetp->hp_dev));
+ irq_flags = devp->hd_flags & HPET_SHARED_IRQ
+ ? SA_SHIRQ : SA_INTERRUPT;
+ if (request_irq(irq, hpet_interrupt, irq_flags,
+ devp->hd_name, (void *)devp)) {
printk(KERN_ERR "hpet: IRQ %d is not free\n", irq);
irq = 0;
}
@@ -416,20 +432,24 @@
write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
}
- isr = (1 << (devp - hpets->hp_dev));
- writeq(isr, &hpet->hpet_isr);
+ if (devp->hd_flags & HPET_SHARED_IRQ) {
+ isr = 1 << (devp - devp->hd_hpets->hp_dev);
+ writel(isr, &hpet->hpet_isr);
+ }
writeq(g, &timer->hpet_config);
local_irq_restore(flags);
return 0;
}
-static inline unsigned long hpet_time_div(unsigned long dis)
+/* converts Hz to number of timer ticks */
+static inline unsigned long hpet_time_div(struct hpets *hpets,
+ unsigned long dis)
{
- unsigned long long m = 1000000000000000ULL;
+ unsigned long long m;
+ m = hpets->hp_tick_freq + (dis >> 1);
do_div(m, dis);
-
return (unsigned long)m;
}
@@ -477,14 +497,21 @@
{
struct hpet_info info;
- info.hi_ireqfreq = hpet_time_div(hpetp->hp_period *
- devp->hd_ireqfreq);
+ if (devp->hd_ireqfreq)
+ info.hi_ireqfreq =
+ hpet_time_div(hpetp, devp->hd_ireqfreq);
+ else
+ info.hi_ireqfreq = 0;
info.hi_flags =
readq(&timer->hpet_config) & Tn_PER_INT_CAP_MASK;
- info.hi_hpet = devp->hd_hpets->hp_which;
- info.hi_timer = devp - devp->hd_hpets->hp_dev;
- if (copy_to_user((void __user *)arg, &info, sizeof(info)))
- err = -EFAULT;
+ info.hi_hpet = hpetp->hp_which;
+ info.hi_timer = devp - hpetp->hp_dev;
+ if (kernel)
+ memcpy((void *)arg, &info, sizeof(info));
+ else
+ if (copy_to_user((void __user *)arg, &info,
+ sizeof(info)))
+ err = -EFAULT;
break;
}
case HPET_EPI:
@@ -516,12 +543,12 @@
break;
}
- if (arg & (arg - 1)) {
+ if (!arg) {
err = -EINVAL;
break;
}
- devp->hd_ireqfreq = hpet_time_div(hpetp->hp_period * arg);
+ devp->hd_ireqfreq = hpet_time_div(hpetp, arg);
}
return err;
@@ -539,6 +566,17 @@
.mmap = hpet_mmap,
};
+static int hpet_is_known(struct hpet_data *hdp)
+{
+ struct hpets *hpetp;
+
+ for (hpetp = hpets; hpetp; hpetp = hpetp->hp_next)
+ if (hpetp->hp_hpet_phys == hdp->hd_phys_address)
+ return 1;
+
+ return 0;
+}
+
EXPORT_SYMBOL(hpet_alloc);
EXPORT_SYMBOL(hpet_register);
EXPORT_SYMBOL(hpet_unregister);
@@ -563,6 +601,8 @@
return -EINVAL;
}
+ tp->ht_opaque = NULL;
+
spin_lock_irq(&hpet_task_lock);
spin_lock(&hpet_lock);
@@ -702,15 +742,14 @@
#ifdef CONFIG_TIME_INTERPOLATION
struct time_interpolator *ti;
- ti = kmalloc(sizeof(*ti), GFP_KERNEL);
+ ti = kzalloc(sizeof(*ti), GFP_KERNEL);
if (!ti)
return;
- memset(ti, 0, sizeof(*ti));
ti->source = TIME_SOURCE_MMIO64;
ti->shift = 10;
ti->addr = &hpetp->hp_hpet->hpet_mc;
- ti->frequency = hpet_time_div(hpets->hp_period);
+ ti->frequency = hpetp->hp_tick_freq;
ti->drift = HPET_DRIFT;
ti->mask = -1;
@@ -743,11 +782,11 @@
if (!timer)
return 0;
- hpet = hpets->hp_hpet;
+ hpet = hpetp->hp_hpet;
t = read_counter(&timer->hpet_compare);
i = 0;
- count = hpet_time_div(hpetp->hp_period * TICK_CALIBRATE);
+ count = hpet_time_div(hpetp, TICK_CALIBRATE);
local_irq_save(flags);
@@ -771,28 +810,29 @@
struct hpets *hpetp;
size_t siz;
struct hpet __iomem *hpet;
- static struct hpets *last = (struct hpets *)0;
- unsigned long ns;
+ static struct hpets *last = NULL;
+ unsigned long period;
+ unsigned long long temp;
/*
* hpet_alloc can be called by platform dependent code.
- * if platform dependent code has allocated the hpet
- * ACPI also reports hpet, then we catch it here.
+ * If platform dependent code has allocated the hpet that
+ * ACPI has also reported, then we catch it here.
*/
- for (hpetp = hpets; hpetp; hpetp = hpetp->hp_next)
- if (hpetp->hp_hpet == hdp->hd_address)
- return 0;
+ if (hpet_is_known(hdp)) {
+ printk(KERN_DEBUG "%s: duplicate HPET ignored\n",
+ __FUNCTION__);
+ return 0;
+ }
siz = sizeof(struct hpets) + ((hdp->hd_nirqs - 1) *
sizeof(struct hpet_dev));
- hpetp = kmalloc(siz, GFP_KERNEL);
+ hpetp = kzalloc(siz, GFP_KERNEL);
if (!hpetp)
return -ENOMEM;
- memset(hpetp, 0, siz);
-
hpetp->hp_which = hpet_nhpet++;
hpetp->hp_hpet = hdp->hd_address;
hpetp->hp_hpet_phys = hdp->hd_phys_address;
@@ -822,21 +862,23 @@
last = hpetp;
- hpetp->hp_period = (cap & HPET_COUNTER_CLK_PERIOD_MASK) >>
- HPET_COUNTER_CLK_PERIOD_SHIFT;
+ period = (cap & HPET_COUNTER_CLK_PERIOD_MASK) >>
+ HPET_COUNTER_CLK_PERIOD_SHIFT; /* fs, 10^-15 */
+ temp = 1000000000000000uLL; /* 10^15 femtoseconds per second */
+ temp += period >> 1; /* round */
+ do_div(temp, period);
+ hpetp->hp_tick_freq = temp; /* ticks per second */
- printk(KERN_INFO "hpet%d: at MMIO 0x%lx, IRQ%s",
- hpetp->hp_which, hdp->hd_phys_address,
+ printk(KERN_INFO "hpet%d: at MMIO 0x%lx (virtual 0x%p), IRQ%s",
+ hpetp->hp_which, hdp->hd_phys_address, hdp->hd_address,
hpetp->hp_ntimer > 1 ? "s" : "");
for (i = 0; i < hpetp->hp_ntimer; i++)
printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
printk("\n");
- ns = hpetp->hp_period; /* femptoseconds, 10^-15 */
- ns /= 1000000; /* convert to nanoseconds, 10^-9 */
- printk(KERN_INFO "hpet%d: %ldns tick, %d %d-bit timers\n",
- hpetp->hp_which, ns, hpetp->hp_ntimer,
- cap & HPET_COUNTER_SIZE_MASK ? 64 : 32);
+ printk(KERN_INFO "hpet%u: %u %d-bit timers, %Lu Hz\n",
+ hpetp->hp_which, hpetp->hp_ntimer,
+ cap & HPET_COUNTER_SIZE_MASK ? 64 : 32, hpetp->hp_tick_freq);
mcfg = readq(&hpet->hpet_config);
if ((mcfg & HPET_ENABLE_CNF_MASK) == 0) {
@@ -845,13 +887,10 @@
writeq(mcfg, &hpet->hpet_config);
}
- for (i = 0, devp = hpetp->hp_dev; i < hpetp->hp_ntimer;
- i++, hpet_ntimer++, devp++) {
- unsigned long v;
+ for (i = 0, devp = hpetp->hp_dev; i < hpetp->hp_ntimer; i++, devp++) {
struct hpet_timer __iomem *timer;
timer = &hpet->hpet_timers[devp - hpetp->hp_dev];
- v = readq(&timer->hpet_config);
devp->hd_hpets = hpetp;
devp->hd_hpet = hpet;
@@ -880,7 +919,6 @@
struct hpet_data *hdp;
acpi_status status;
struct acpi_resource_address64 addr;
- struct hpets *hpetp;
hdp = data;
@@ -893,9 +931,29 @@
hdp->hd_phys_address = addr.min_address_range;
hdp->hd_address = ioremap(addr.min_address_range, size);
- for (hpetp = hpets; hpetp; hpetp = hpetp->hp_next)
- if (hpetp->hp_hpet == hdp->hd_address)
- return -EBUSY;
+ if (hpet_is_known(hdp)) {
+ printk(KERN_DEBUG "%s: 0x%lx is busy\n",
+ __FUNCTION__, hdp->hd_phys_address);
+ iounmap(hdp->hd_address);
+ return -EBUSY;
+ }
+ } else if (res->id == ACPI_RSTYPE_FIXED_MEM32) {
+ struct acpi_resource_fixed_mem32 *fixmem32;
+
+ fixmem32 = &res->data.fixed_memory32;
+ if (!fixmem32)
+ return -EINVAL;
+
+ hdp->hd_phys_address = fixmem32->range_base_address;
+ hdp->hd_address = ioremap(fixmem32->range_base_address,
+ HPET_RANGE_SIZE);
+
+ if (hpet_is_known(hdp)) {
+ printk(KERN_DEBUG "%s: 0x%lx is busy\n",
+ __FUNCTION__, hdp->hd_phys_address);
+ iounmap(hdp->hd_address);
+ return -EBUSY;
+ }
} else if (res->id == ACPI_RSTYPE_EXT_IRQ) {
struct acpi_resource_ext_irq *irqp;
int i;
diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c
index 9e4e26a..d815d19 100644
--- a/drivers/char/ip2main.c
+++ b/drivers/char/ip2main.c
@@ -721,8 +721,9 @@
}
if ( NULL != ( pB = i2BoardPtrTable[i] ) ) {
- class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR,
- 4 * i), NULL, "ipl%d", i);
+ class_device_create(ip2_class, NULL,
+ MKDEV(IP2_IPL_MAJOR, 4 * i),
+ NULL, "ipl%d", i);
err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i),
S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR,
"ip2/ipl%d", i);
@@ -732,8 +733,9 @@
goto out_class;
}
- class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR,
- 4 * i + 1), NULL, "stat%d", i);
+ class_device_create(ip2_class, NULL,
+ MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
+ NULL, "stat%d", i);
err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR,
"ip2/stat%d", i);
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index a09ff10..7c0684d 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -798,7 +798,7 @@
devfs_mk_cdev(dev, S_IFCHR | S_IRUSR | S_IWUSR,
"ipmidev/%d", if_num);
- class_device_create(ipmi_class, dev, NULL, "ipmi%d", if_num);
+ class_device_create(ipmi_class, NULL, dev, NULL, "ipmi%d", if_num);
}
static void ipmi_smi_gone(int if_num)
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 9c19e54..e3ddbdb 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -5246,7 +5246,8 @@
devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i),
S_IFCHR | S_IRUSR | S_IWUSR,
"staliomem/%d", i);
- class_device_create(istallion_class, MKDEV(STL_SIOMEMMAJOR, i),
+ class_device_create(istallion_class, NULL,
+ MKDEV(STL_SIOMEMMAJOR, i),
NULL, "staliomem%d", i);
}
diff --git a/drivers/char/lcd.c b/drivers/char/lcd.c
index b771611..29963d8 100644
--- a/drivers/char/lcd.c
+++ b/drivers/char/lcd.c
@@ -575,8 +575,8 @@
static int lcd_waiters = 0;
-static long lcd_read(struct inode *inode, struct file *file, char *buf,
- unsigned long count)
+static ssize_t lcd_read(struct file *file, char *buf,
+ size_t count, loff_t *ofs)
{
long buttons_now;
diff --git a/drivers/char/lcd.h b/drivers/char/lcd.h
index 878a952..a8d4ae7 100644
--- a/drivers/char/lcd.h
+++ b/drivers/char/lcd.h
@@ -22,7 +22,7 @@
#define MAX_IDLE_TIME 120
struct lcd_display {
- unsigned long buttons;
+ unsigned buttons;
int size1;
int size2;
unsigned char line1[LCD_CHARS_PER_LINE];
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index 2afb903..e572605 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -805,7 +805,7 @@
if (reset)
lp_reset(nr);
- class_device_create(lp_class, MKDEV(LP_MAJOR, nr), NULL,
+ class_device_create(lp_class, NULL, MKDEV(LP_MAJOR, nr), NULL,
"lp%d", nr);
devfs_mk_cdev(MKDEV(LP_MAJOR, nr), S_IFCHR | S_IRUGO | S_IWUGO,
"printers/%d", nr);
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 9df928d..91dd669 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -918,7 +918,8 @@
mem_class = class_create(THIS_MODULE, "mem");
for (i = 0; i < ARRAY_SIZE(devlist); i++) {
- class_device_create(mem_class, MKDEV(MEM_MAJOR, devlist[i].minor),
+ class_device_create(mem_class, NULL,
+ MKDEV(MEM_MAJOR, devlist[i].minor),
NULL, devlist[i].name);
devfs_mk_cdev(MKDEV(MEM_MAJOR, devlist[i].minor),
S_IFCHR | devlist[i].mode, devlist[i].name);
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index 0c83751..3e4c041 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -234,7 +234,7 @@
}
dev = MKDEV(MISC_MAJOR, misc->minor);
- misc->class = class_device_create(misc_class, dev, misc->dev,
+ misc->class = class_device_create(misc_class, NULL, dev, misc->dev,
"%s", misc->name);
if (IS_ERR(misc->class)) {
err = PTR_ERR(misc->class);
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index 1200618..78c89a3 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -441,7 +441,7 @@
mmtimer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
int i;
- mmtimer_t *base = timers + cpuid_to_cnodeid(smp_processor_id()) *
+ mmtimer_t *base = timers + cpu_to_node(smp_processor_id()) *
NUM_COMPARATORS;
unsigned long expires = 0;
int result = IRQ_NONE;
@@ -608,7 +608,7 @@
*/
preempt_disable();
- nodeid = cpuid_to_cnodeid(smp_processor_id());
+ nodeid = cpu_to_node(smp_processor_id());
base = timers + nodeid * NUM_COMPARATORS;
retry:
/* Don't use an allocated timer, or a deleted one that's pending */
diff --git a/drivers/char/mwave/3780i.c b/drivers/char/mwave/3780i.c
index 613aed9..d1fe05e 100644
--- a/drivers/char/mwave/3780i.c
+++ b/drivers/char/mwave/3780i.c
@@ -53,6 +53,8 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/sched.h> /* cond_resched() */
+
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index c9bdf54..c556f4d 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -62,7 +62,7 @@
static inline unsigned char *alloc_buf(void)
{
- unsigned int prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
+ gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
if (PAGE_SIZE != N_TTY_BUF_SIZE)
return kmalloc(N_TTY_BUF_SIZE, prio);
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index 1af733d..9e24bbd 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -32,9 +32,11 @@
* added changelog
* 1.2 Erik Gilling: Cobalt Networks support
* Tim Hockin: general cleanup, Cobalt support
+ * 1.3 Jon Ringle: Comdial MP1000 support
+ *
*/
-#define NVRAM_VERSION "1.2"
+#define NVRAM_VERSION "1.3"
#include <linux/module.h>
#include <linux/config.h>
@@ -45,6 +47,7 @@
#define PC 1
#define ATARI 2
#define COBALT 3
+#define MP1000 4
/* select machine configuration */
#if defined(CONFIG_ATARI)
@@ -54,6 +57,9 @@
# if defined(CONFIG_COBALT)
# include <linux/cobalt-nvram.h>
# define MACH COBALT
+# elif defined(CONFIG_MACH_MP1000)
+# undef MACH
+# define MACH MP1000
# else
# define MACH PC
# endif
@@ -112,6 +118,23 @@
#endif
+#if MACH == MP1000
+
+/* RTC in a MP1000 */
+#define CHECK_DRIVER_INIT() 1
+
+#define MP1000_CKS_RANGE_START 0
+#define MP1000_CKS_RANGE_END 111
+#define MP1000_CKS_LOC 112
+
+#define NVRAM_BYTES (128-NVRAM_FIRST_BYTE)
+
+#define mach_check_checksum mp1000_check_checksum
+#define mach_set_checksum mp1000_set_checksum
+#define mach_proc_infos mp1000_proc_infos
+
+#endif
+
/* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
* rtc_lock held. Due to the index-port/data-port design of the RTC, we
* don't want two different things trying to get to it at once. (e.g. the
@@ -915,6 +938,91 @@
#endif /* MACH == ATARI */
+#if MACH == MP1000
+
+static int
+mp1000_check_checksum(void)
+{
+ int i;
+ unsigned short sum = 0;
+ unsigned short expect;
+
+ for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i)
+ sum += __nvram_read_byte(i);
+
+ expect = __nvram_read_byte(MP1000_CKS_LOC+1)<<8 |
+ __nvram_read_byte(MP1000_CKS_LOC);
+ return ((sum & 0xffff) == expect);
+}
+
+static void
+mp1000_set_checksum(void)
+{
+ int i;
+ unsigned short sum = 0;
+
+ for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i)
+ sum += __nvram_read_byte(i);
+ __nvram_write_byte(sum >> 8, MP1000_CKS_LOC + 1);
+ __nvram_write_byte(sum & 0xff, MP1000_CKS_LOC);
+}
+
+#ifdef CONFIG_PROC_FS
+
+#define SERVER_N_LEN 32
+#define PATH_N_LEN 32
+#define FILE_N_LEN 32
+#define NVRAM_MAGIC_SIG 0xdead
+
+typedef struct NvRamImage
+{
+ unsigned short int magic;
+ unsigned short int mode;
+ char fname[FILE_N_LEN];
+ char path[PATH_N_LEN];
+ char server[SERVER_N_LEN];
+ char pad[12];
+} NvRam;
+
+static int
+mp1000_proc_infos(unsigned char *nvram, char *buffer, int *len,
+ off_t *begin, off_t offset, int size)
+{
+ int checksum;
+ NvRam* nv = (NvRam*)nvram;
+
+ spin_lock_irq(&rtc_lock);
+ checksum = __nvram_check_checksum();
+ spin_unlock_irq(&rtc_lock);
+
+ PRINT_PROC("Checksum status: %svalid\n", checksum ? "" : "not ");
+
+ switch( nv->mode )
+ {
+ case 0 :
+ PRINT_PROC( "\tMode 0, tftp prompt\n" );
+ break;
+ case 1 :
+ PRINT_PROC( "\tMode 1, booting from disk\n" );
+ break;
+ case 2 :
+ PRINT_PROC( "\tMode 2, Alternate boot from disk /boot/%s\n", nv->fname );
+ break;
+ case 3 :
+ PRINT_PROC( "\tMode 3, Booting from net:\n" );
+ PRINT_PROC( "\t\t%s:%s%s\n",nv->server, nv->path, nv->fname );
+ break;
+ default:
+ PRINT_PROC( "\tInconsistant nvram?\n" );
+ break;
+ }
+
+ return 1;
+}
+#endif
+
+#endif /* MACH == MP1000 */
+
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(__nvram_read_byte);
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index 0e22880..306ee0f 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -752,7 +752,7 @@
static void pp_attach(struct parport *port)
{
- class_device_create(ppdev_class, MKDEV(PP_MAJOR, port->number),
+ class_device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number),
NULL, "parport%d", port->number);
}
diff --git a/drivers/char/qtronix.c b/drivers/char/qtronix.c
index 40a3cf6..601d09b 100644
--- a/drivers/char/qtronix.c
+++ b/drivers/char/qtronix.c
@@ -591,6 +591,11 @@
return retval;
queue = (struct aux_queue *) kmalloc(sizeof(*queue), GFP_KERNEL);
+ if (!queue) {
+ misc_deregister(&psaux_mouse);
+ return -ENOMEM;
+ }
+
memset(queue, 0, sizeof(*queue));
queue->head = queue->tail = 0;
init_waitqueue_head(&queue->proc_list);
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index f13e5de..30e4cbe 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -128,7 +128,7 @@
static void bind_device(struct raw_config_request *rq)
{
class_device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor));
- class_device_create(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor),
+ class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor),
NULL, "raw%d", rq->raw_minor);
}
@@ -307,7 +307,7 @@
unregister_chrdev_region(dev, MAX_RAW_MINORS);
goto error;
}
- class_device_create(raw_class, MKDEV(RAW_MAJOR, 0), NULL, "rawctl");
+ class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl");
devfs_mk_cdev(MKDEV(RAW_MAJOR, 0),
S_IFCHR | S_IRUGO | S_IWUGO,
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 5b1d368..928b850 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -256,7 +256,6 @@
static int sReadAiopID(ByteIO_t io);
static int sReadAiopNumChan(WordIO_t io);
-#ifdef MODULE
MODULE_AUTHOR("Theodore Ts'o");
MODULE_DESCRIPTION("Comtrol RocketPort driver");
module_param(board1, ulong, 0);
@@ -288,17 +287,14 @@
module_param_array(pc104_4, ulong, NULL, 0);
MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
-int rp_init(void);
+static int rp_init(void);
static void rp_cleanup_module(void);
module_init(rp_init);
module_exit(rp_cleanup_module);
-#endif
-#ifdef MODULE_LICENSE
MODULE_LICENSE("Dual BSD/GPL");
-#endif
/*************************************************************************/
/* Module code starts here */
@@ -2378,7 +2374,7 @@
/*
* The module "startup" routine; it's run when the module is loaded.
*/
-int __init rp_init(void)
+static int __init rp_init(void)
{
int retval, pci_boards_found, isa_boards_found, i;
@@ -2502,7 +2498,6 @@
return 0;
}
-#ifdef MODULE
static void rp_cleanup_module(void)
{
@@ -2530,7 +2525,6 @@
if (controller)
release_region(controller, 4);
}
-#endif
/***************************************************************************
Function: sInitController
diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c
index e1a90d9..887b8b2 100644
--- a/drivers/char/s3c2410-rtc.c
+++ b/drivers/char/s3c2410-rtc.c
@@ -519,30 +519,28 @@
static int ticnt_save;
-static int s3c2410_rtc_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s3c2410_rtc_suspend(struct device *dev, pm_message_t state)
{
struct rtc_time tm;
struct timespec time;
time.tv_nsec = 0;
- if (level == SUSPEND_POWER_DOWN) {
- /* save TICNT for anyone using periodic interrupts */
+ /* save TICNT for anyone using periodic interrupts */
- ticnt_save = readb(S3C2410_TICNT);
+ ticnt_save = readb(S3C2410_TICNT);
- /* calculate time delta for suspend */
+ /* calculate time delta for suspend */
- s3c2410_rtc_gettime(&tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- save_time_delta(&s3c2410_rtc_delta, &time);
- s3c2410_rtc_enable(dev, 0);
- }
+ s3c2410_rtc_gettime(&tm);
+ rtc_tm_to_time(&tm, &time.tv_sec);
+ save_time_delta(&s3c2410_rtc_delta, &time);
+ s3c2410_rtc_enable(dev, 0);
return 0;
}
-static int s3c2410_rtc_resume(struct device *dev, u32 level)
+static int s3c2410_rtc_resume(struct device *dev)
{
struct rtc_time tm;
struct timespec time;
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 6b4e9d1..dda30e4 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -790,7 +790,7 @@
}
- printk("Total: %d A2232 boards initialized.\n.", nr_a2232); /* Some status report if no card was found */
+ printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */
a2232_init_portstructs();
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index 261a41b..0e7d216 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -377,7 +377,7 @@
dev_t first_dev, dev;
nasid_t event_nasid = ia64_sn_get_console_nasid();
- if (alloc_chrdev_region(&first_dev, 0, numionodes,
+ if (alloc_chrdev_region(&first_dev, 0, num_cnodes,
SYSCTL_BASENAME) < 0) {
printk("%s: failed to register SN system controller device\n",
__FUNCTION__);
@@ -385,7 +385,7 @@
}
snsc_class = class_create(THIS_MODULE, SYSCTL_BASENAME);
- for (cnode = 0; cnode < numionodes; cnode++) {
+ for (cnode = 0; cnode < num_cnodes; cnode++) {
geoid = cnodeid_get_geoid(cnode);
devnamep = devname;
format_module_id(devnamep, geo_module(geoid),
@@ -437,7 +437,7 @@
continue;
}
- class_device_create(snsc_class, dev, NULL,
+ class_device_create(snsc_class, NULL, dev, NULL,
"%s", devname);
ia64_sn_irtr_intr_enable(scd->scd_nasid,
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 36ae9ad..f86c155 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -424,10 +424,6 @@
#define SONYPI_BUF_SIZE 128
-/* The name of the devices for the input device drivers */
-#define SONYPI_JOG_INPUTNAME "Sony Vaio Jogdial"
-#define SONYPI_KEY_INPUTNAME "Sony Vaio Keys"
-
/* Correspondance table between sonypi events and input layer events */
static struct {
int sonypiev;
@@ -490,8 +486,8 @@
struct fasync_struct *fifo_async;
int open_count;
int model;
- struct input_dev input_jog_dev;
- struct input_dev input_key_dev;
+ struct input_dev *input_jog_dev;
+ struct input_dev *input_key_dev;
struct work_struct input_work;
struct kfifo *input_fifo;
spinlock_t input_fifo_lock;
@@ -779,8 +775,8 @@
static void sonypi_report_input_event(u8 event)
{
- struct input_dev *jog_dev = &sonypi_device.input_jog_dev;
- struct input_dev *key_dev = &sonypi_device.input_key_dev;
+ struct input_dev *jog_dev = sonypi_device.input_jog_dev;
+ struct input_dev *key_dev = sonypi_device.input_key_dev;
struct sonypi_keypress kp = { NULL };
int i;
@@ -1171,19 +1167,17 @@
#ifdef CONFIG_PM
static int old_camera_power;
-static int sonypi_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sonypi_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_DISABLE) {
- old_camera_power = sonypi_device.camera_power;
- sonypi_disable();
- }
+ old_camera_power = sonypi_device.camera_power;
+ sonypi_disable();
+
return 0;
}
-static int sonypi_resume(struct device *dev, u32 level)
+static int sonypi_resume(struct device *dev)
{
- if (level == RESUME_ENABLE)
- sonypi_enable(old_camera_power);
+ sonypi_enable(old_camera_power);
return 0;
}
#endif
@@ -1203,6 +1197,47 @@
.shutdown = sonypi_shutdown,
};
+static int __devinit sonypi_create_input_devices(void)
+{
+ struct input_dev *jog_dev;
+ struct input_dev *key_dev;
+ int i;
+
+ sonypi_device.input_jog_dev = jog_dev = input_allocate_device();
+ if (!jog_dev)
+ return -ENOMEM;
+
+ jog_dev->name = "Sony Vaio Jogdial";
+ jog_dev->id.bustype = BUS_ISA;
+ jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
+
+ jog_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ jog_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_MIDDLE);
+ jog_dev->relbit[0] = BIT(REL_WHEEL);
+
+ sonypi_device.input_key_dev = key_dev = input_allocate_device();
+ if (!key_dev) {
+ input_free_device(jog_dev);
+ sonypi_device.input_jog_dev = NULL;
+ return -ENOMEM;
+ }
+
+ key_dev->name = "Sony Vaio Keys";
+ key_dev->id.bustype = BUS_ISA;
+ key_dev->id.vendor = PCI_VENDOR_ID_SONY;
+
+ /* Initialize the Input Drivers: special keys */
+ key_dev->evbit[0] = BIT(EV_KEY);
+ for (i = 0; sonypi_inputkeys[i].sonypiev; i++)
+ if (sonypi_inputkeys[i].inputev)
+ set_bit(sonypi_inputkeys[i].inputev, key_dev->keybit);
+
+ input_register_device(jog_dev);
+ input_register_device(key_dev);
+
+ return 0;
+}
+
static int __devinit sonypi_probe(void)
{
int i, ret;
@@ -1298,34 +1333,10 @@
}
if (useinput) {
- /* Initialize the Input Drivers: jogdial */
- int i;
- sonypi_device.input_jog_dev.evbit[0] =
- BIT(EV_KEY) | BIT(EV_REL);
- sonypi_device.input_jog_dev.keybit[LONG(BTN_MOUSE)] =
- BIT(BTN_MIDDLE);
- sonypi_device.input_jog_dev.relbit[0] = BIT(REL_WHEEL);
- sonypi_device.input_jog_dev.name = SONYPI_JOG_INPUTNAME;
- sonypi_device.input_jog_dev.id.bustype = BUS_ISA;
- sonypi_device.input_jog_dev.id.vendor = PCI_VENDOR_ID_SONY;
- input_register_device(&sonypi_device.input_jog_dev);
- printk(KERN_INFO "%s input method installed.\n",
- sonypi_device.input_jog_dev.name);
-
- /* Initialize the Input Drivers: special keys */
- sonypi_device.input_key_dev.evbit[0] = BIT(EV_KEY);
- for (i = 0; sonypi_inputkeys[i].sonypiev; i++)
- if (sonypi_inputkeys[i].inputev)
- set_bit(sonypi_inputkeys[i].inputev,
- sonypi_device.input_key_dev.keybit);
- sonypi_device.input_key_dev.name = SONYPI_KEY_INPUTNAME;
- sonypi_device.input_key_dev.id.bustype = BUS_ISA;
- sonypi_device.input_key_dev.id.vendor = PCI_VENDOR_ID_SONY;
-
- input_register_device(&sonypi_device.input_key_dev);
- printk(KERN_INFO "%s input method installed.\n",
- sonypi_device.input_key_dev.name);
+ ret = sonypi_create_input_devices();
+ if (ret)
+ goto out_inputdevices;
spin_lock_init(&sonypi_device.input_fifo_lock);
sonypi_device.input_fifo =
@@ -1375,8 +1386,9 @@
out_platformdev:
kfifo_free(sonypi_device.input_fifo);
out_infifo:
- input_unregister_device(&sonypi_device.input_key_dev);
- input_unregister_device(&sonypi_device.input_jog_dev);
+ input_unregister_device(sonypi_device.input_key_dev);
+ input_unregister_device(sonypi_device.input_jog_dev);
+out_inputdevices:
free_irq(sonypi_device.irq, sonypi_irq);
out_reqirq:
release_region(sonypi_device.ioport1, sonypi_device.region_size);
@@ -1402,8 +1414,8 @@
platform_device_unregister(sonypi_device.pdev);
if (useinput) {
- input_unregister_device(&sonypi_device.input_key_dev);
- input_unregister_device(&sonypi_device.input_jog_dev);
+ input_unregister_device(sonypi_device.input_key_dev);
+ input_unregister_device(sonypi_device.input_jog_dev);
kfifo_free(sonypi_device.input_fifo);
}
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 50e0b61..352547e 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -38,19 +38,19 @@
*
* Revision 1.0: April 1st 1997.
* Initial release for alpha testing.
- * Revision 1.1: April 14th 1997.
- * Incorporated Richard Hudsons suggestions,
+ * Revision 1.1: April 14th 1997.
+ * Incorporated Richard Hudsons suggestions,
* removed some debugging printk's.
* Revision 1.2: April 15th 1997.
* Ported to 2.1.x kernels.
- * Revision 1.3: April 17th 1997
- * Backported to 2.0. (Compatibility macros).
+ * Revision 1.3: April 17th 1997
+ * Backported to 2.0. (Compatibility macros).
* Revision 1.4: April 18th 1997
- * Fixed DTR/RTS bug that caused the card to indicate
- * "don't send data" to a modem after the password prompt.
+ * Fixed DTR/RTS bug that caused the card to indicate
+ * "don't send data" to a modem after the password prompt.
* Fixed bug for premature (fake) interrupts.
* Revision 1.5: April 19th 1997
- * fixed a minor typo in the header file, cleanup a little.
+ * fixed a minor typo in the header file, cleanup a little.
* performance warnings are now MAXed at once per minute.
* Revision 1.6: May 23 1997
* Changed the specialix=... format to include interrupt.
@@ -60,10 +60,10 @@
* port to linux-2.1.43 kernel.
* Revision 1.9: Oct 9 1998
* Added stuff for the IO8+/PCI version.
- * Revision 1.10: Oct 22 1999 / Jan 21 2000.
- * Added stuff for setserial.
+ * Revision 1.10: Oct 22 1999 / Jan 21 2000.
+ * Added stuff for setserial.
* Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr)
- *
+ *
*/
#define VERSION "1.11"
@@ -154,7 +154,7 @@
-/*
+/*
* The following defines are mostly for testing purposes. But if you need
* some nice reporting in your syslog, you can define them also.
*/
@@ -188,7 +188,7 @@
static unsigned long baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 0,
+ 9600, 19200, 38400, 57600, 115200, 0,
};
static struct specialix_board sx_board[SX_NBOARD] = {
@@ -216,7 +216,7 @@
KERN_ERR "sx: Warning: bad specialix port magic number for device %s in %s\n";
static const char *badinfo =
KERN_ERR "sx: Warning: null specialix port for device %s in %s\n";
-
+
if (!port) {
printk(badinfo, name, routine);
return 1;
@@ -231,9 +231,9 @@
/*
- *
+ *
* Service functions for specialix IO8+ driver.
- *
+ *
*/
/* Get board number from pointer */
@@ -246,7 +246,7 @@
/* Get port number from pointer */
static inline int port_No (struct specialix_port const * port)
{
- return SX_PORT(port - sx_port);
+ return SX_PORT(port - sx_port);
}
@@ -309,7 +309,7 @@
return;
udelay (1);
}
-
+
printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
}
@@ -329,7 +329,7 @@
return;
udelay (1);
}
-
+
printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
}
@@ -338,34 +338,28 @@
* specialix IO8+ IO range functions.
*/
-static inline int sx_check_io_range(struct specialix_board * bp)
+static inline int sx_request_io_range(struct specialix_board * bp)
{
- return check_region (bp->base, SX_IO_SPACE);
-}
-
-
-static inline void sx_request_io_range(struct specialix_board * bp)
-{
- request_region(bp->base,
- bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE,
- "specialix IO8+" );
+ return request_region(bp->base,
+ bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
+ "specialix IO8+") == NULL;
}
static inline void sx_release_io_range(struct specialix_board * bp)
{
- release_region(bp->base,
+ release_region(bp->base,
bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE);
}
-
+
/* Must be called with enabled interrupts */
-/* Ugly. Very ugly. Don't use this for anything else than initialization
+/* Ugly. Very ugly. Don't use this for anything else than initialization
code */
static inline void sx_long_delay(unsigned long delay)
{
unsigned long i;
-
+
for (i = jiffies + delay; time_after(i, jiffies); ) ;
}
@@ -378,7 +372,7 @@
int i;
unsigned long flags;
- if (bp->flags & SX_BOARD_IS_PCI)
+ if (bp->flags & SX_BOARD_IS_PCI)
return 1;
switch (bp->irq) {
/* In the same order as in the docs... */
@@ -420,7 +414,7 @@
sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */
/* Set RegAckEn */
sx_out_off(bp, CD186x_SRCR, sx_in (bp, CD186x_SRCR) | SRCR_REGACKEN);
-
+
/* Setting up prescaler. We need 4 ticks per 1 ms */
scaler = SX_OSCFREQ/SPECIALIX_TPS;
@@ -448,7 +442,7 @@
spin_lock_irqsave(&bp->lock, flags);
for (i=0, t=0;i<8;i++) {
sx_out_off (bp, CD186x_CAR, i);
- if (sx_in_off (bp, reg) & bit)
+ if (sx_in_off (bp, reg) & bit)
t |= 1 << i;
}
spin_unlock_irqrestore(&bp->lock, flags);
@@ -472,7 +466,7 @@
spin_unlock_irqrestore(&bp->lock, flags);
if (irq) {
printk (KERN_INFO "Missed interrupt... Calling int from timer. \n");
- sx_interrupt (((struct specialix_board *)data)->irq,
+ sx_interrupt (((struct specialix_board *)data)->irq,
(void*)data, NULL);
}
missed_irq_timer.expires = jiffies + sx_poll;
@@ -495,7 +489,7 @@
func_enter();
- if (sx_check_io_range(bp)) {
+ if (sx_request_io_range(bp)) {
func_exit();
return 1;
}
@@ -509,15 +503,16 @@
short_pause ();
val2 = sx_in_off(bp, CD186x_PPRL);
-
+
if ((val1 != 0x5a) || (val2 != 0xa5)) {
printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
board_No(bp), bp->base);
+ sx_release_io_range(bp);
func_exit();
return 1;
}
- /* Check the DSR lines that Specialix uses as board
+ /* Check the DSR lines that Specialix uses as board
identification */
val1 = read_cross_byte (bp, CD186x_MSVR, MSVR_DSR);
val2 = read_cross_byte (bp, CD186x_MSVR, MSVR_RTS);
@@ -532,6 +527,7 @@
if (val1 != val2) {
printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
board_No(bp), val2, bp->base, val1);
+ sx_release_io_range(bp);
func_exit();
return 1;
}
@@ -546,7 +542,7 @@
sx_wait_CCR(bp);
sx_out(bp, CD186x_CCR, CCR_TXEN); /* Enable transmitter */
sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr */
- sx_long_delay(HZ/20);
+ sx_long_delay(HZ/20);
irqs = probe_irq_off(irqs);
dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
@@ -561,14 +557,15 @@
}
dprintk (SX_DEBUG_INIT "val1 = %02x, val2 = %02x, val3 = %02x.\n",
- val1, val2, val3);
-
+ val1, val2, val3);
+
}
-
+
#if 0
if (irqs <= 0) {
printk(KERN_ERR "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
board_No(bp), bp->base);
+ sx_release_io_range(bp);
func_exit();
return 1;
}
@@ -579,19 +576,20 @@
#endif
/* Reset CD186x again */
if (!sx_init_CD186x(bp)) {
+ sx_release_io_range(bp);
func_exit();
- return -EIO;
+ return 1;
}
sx_request_io_range(bp);
bp->flags |= SX_BOARD_PRESENT;
-
+
/* Chip revcode pkgtype
GFRCR SRCR bit 7
CD180 rev B 0x81 0
CD180 rev C 0x82 0
CD1864 rev A 0x82 1
- CD1865 rev A 0x83 1 -- Do not use!!! Does not work.
+ CD1865 rev A 0x83 1 -- Do not use!!! Does not work.
CD1865 rev B 0x84 1
-- Thanks to Gwen Wang, Cirrus Logic.
*/
@@ -623,8 +621,8 @@
return 0;
}
-/*
- *
+/*
+ *
* Interrupt processing routines.
* */
@@ -657,7 +655,7 @@
return port;
}
}
- printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n",
+ printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n",
board_No(bp), what, channel);
return NULL;
}
@@ -681,7 +679,7 @@
tty = port->tty;
dprintk (SX_DEBUG_RX, "port: %p count: %d BUFF_SIZE: %d\n",
port, tty->flip.count, TTY_FLIPBUF_SIZE);
-
+
status = sx_in(bp, CD186x_RCSR);
dprintk (SX_DEBUG_RX, "status: 0x%x\n", status);
@@ -707,30 +705,30 @@
return;
}
if (status & RCSR_TOUT) {
- printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
+ printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
board_No(bp), port_No(port));
func_exit();
return;
-
+
} else if (status & RCSR_BREAK) {
dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
*tty->flip.flag_buf_ptr++ = TTY_BREAK;
if (port->flags & ASYNC_SAK)
do_SAK(tty);
-
- } else if (status & RCSR_PE)
+
+ } else if (status & RCSR_PE)
*tty->flip.flag_buf_ptr++ = TTY_PARITY;
-
- else if (status & RCSR_FE)
+
+ else if (status & RCSR_FE)
*tty->flip.flag_buf_ptr++ = TTY_FRAME;
-
+
else if (status & RCSR_OE)
*tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
-
+
else
*tty->flip.flag_buf_ptr++ = 0;
-
+
*tty->flip.char_buf_ptr++ = ch;
tty->flip.count++;
schedule_delayed_work(&tty->flip.work, 1);
@@ -746,18 +744,18 @@
unsigned char count;
func_enter();
-
+
if (!(port = sx_get_port(bp, "Receive"))) {
dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
func_exit();
return;
}
tty = port->tty;
-
+
count = sx_in(bp, CD186x_RDCR);
dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
port->hits[count > 8 ? 9 : count]++;
-
+
while (count--) {
if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
printk(KERN_INFO "sx%d: port %d: Working around flip buffer overflow.\n",
@@ -787,7 +785,7 @@
}
dprintk (SX_DEBUG_TX, "port: %p\n", port);
tty = port->tty;
-
+
if (port->IER & IER_TXEMPTY) {
/* FIFO drained */
sx_out(bp, CD186x_CAR, port_No(port));
@@ -796,7 +794,7 @@
func_exit();
return;
}
-
+
if ((port->xmit_cnt <= 0 && !port->break_length)
|| tty->stopped || tty->hw_stopped) {
sx_out(bp, CD186x_CAR, port_No(port));
@@ -805,7 +803,7 @@
func_exit();
return;
}
-
+
if (port->break_length) {
if (port->break_length > 0) {
if (port->COR2 & COR2_ETC) {
@@ -831,7 +829,7 @@
func_exit();
return;
}
-
+
count = CD186x_NFIFO;
do {
sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]);
@@ -839,7 +837,7 @@
if (--port->xmit_cnt <= 0)
break;
} while (--count > 0);
-
+
if (port->xmit_cnt <= 0) {
sx_out(bp, CD186x_CAR, port_No(port));
port->IER &= ~IER_TXRDY;
@@ -862,9 +860,9 @@
dprintk (SX_DEBUG_SIGNALS, "Modem intr. ");
if (!(port = sx_get_port(bp, "Modem")))
return;
-
+
tty = port->tty;
-
+
mcr = sx_in(bp, CD186x_MCR);
printk ("mcr = %02x.\n", mcr);
@@ -879,7 +877,7 @@
schedule_work(&port->tqueue_hangup);
}
}
-
+
#ifdef SPECIALIX_BRAIN_DAMAGED_CTS
if (mcr & MCR_CTSCHG) {
if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) {
@@ -906,7 +904,7 @@
sx_out(bp, CD186x_IER, port->IER);
}
#endif /* SPECIALIX_BRAIN_DAMAGED_CTS */
-
+
/* Clear change bits */
sx_out(bp, CD186x_MCR, 0);
}
@@ -940,7 +938,7 @@
while ((++loop < 16) && (status = (sx_in(bp, CD186x_SRSR) &
(SRSR_RREQint |
SRSR_TREQint |
- SRSR_MREQint)))) {
+ SRSR_MREQint)))) {
if (status & SRSR_RREQint) {
ack = sx_in(bp, CD186x_RRAR);
@@ -951,7 +949,7 @@
else
printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
board_No(bp), status, ack);
-
+
} else if (status & SRSR_TREQint) {
ack = sx_in(bp, CD186x_TRAR);
@@ -963,13 +961,13 @@
} else if (status & SRSR_MREQint) {
ack = sx_in(bp, CD186x_MRAR);
- if (ack == (SX_ID | GIVR_IT_MODEM))
+ if (ack == (SX_ID | GIVR_IT_MODEM))
sx_check_modem(bp);
else
printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
board_No(bp), status, ack);
-
- }
+
+ }
sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */
}
@@ -1026,7 +1024,7 @@
{
int error;
- if (bp->flags & SX_BOARD_ACTIVE)
+ if (bp->flags & SX_BOARD_ACTIVE)
return 0;
if (bp->flags & SX_BOARD_IS_PCI)
@@ -1034,7 +1032,7 @@
else
error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT, "specialix IO8+", bp);
- if (error)
+ if (error)
return error;
turn_ints_on (bp);
@@ -1055,7 +1053,7 @@
}
bp->flags &= ~SX_BOARD_ACTIVE;
-
+
dprintk (SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
bp->irq, board_No (bp));
free_irq(bp->irq, bp);
@@ -1068,7 +1066,7 @@
/*
- * Setting up port characteristics.
+ * Setting up port characteristics.
* Must be called with disabled interrupts
*/
static void sx_change_speed(struct specialix_board *bp, struct specialix_port *port)
@@ -1103,10 +1101,10 @@
spin_unlock_irqrestore(&bp->lock, flags);
dprintk (SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
baud = C_BAUD(tty);
-
+
if (baud & CBAUDEX) {
baud &= ~CBAUDEX;
- if (baud < 1 || baud > 2)
+ if (baud < 1 || baud > 2)
port->tty->termios->c_cflag &= ~CBAUDEX;
else
baud += 15;
@@ -1117,8 +1115,8 @@
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
baud += 2;
}
-
-
+
+
if (!baud_table[baud]) {
/* Drop DTR & exit */
dprintk (SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n");
@@ -1127,7 +1125,7 @@
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_MSVR, port->MSVR );
spin_unlock_irqrestore(&bp->lock, flags);
- }
+ }
else
dprintk (SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
return;
@@ -1137,9 +1135,9 @@
port ->MSVR |= MSVR_DTR;
}
}
-
+
/*
- * Now we must calculate some speed depended things
+ * Now we must calculate some speed depended things
*/
/* Set baud rate for port */
@@ -1152,7 +1150,7 @@
tmp = (((SX_OSCFREQ + baud_table[baud]/2) / baud_table[baud] +
CD186x_TPC/2) / CD186x_TPC);
- if ((tmp < 0x10) && time_before(again, jiffies)) {
+ if ((tmp < 0x10) && time_before(again, jiffies)) {
again = jiffies + HZ * 60;
/* Page 48 of version 2.0 of the CL-CD1865 databook */
if (tmp >= 12) {
@@ -1164,27 +1162,27 @@
printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
"Warning: overstressing Cirrus chip. "
"This might not work.\n"
- "Read specialix.txt for more info.\n",
+ "Read specialix.txt for more info.\n",
port_No (port), tmp);
}
}
spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff);
- sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff);
- sx_out(bp, CD186x_RBPRL, tmp & 0xff);
+ sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff);
+ sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff);
+ sx_out(bp, CD186x_RBPRL, tmp & 0xff);
sx_out(bp, CD186x_TBPRL, tmp & 0xff);
spin_unlock_irqrestore(&bp->lock, flags);
if (port->custom_divisor) {
baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor;
baud = ( baud + 5 ) / 10;
- } else
+ } else
baud = (baud_table[baud] + 5) / 10; /* Estimated CPS */
/* Two timer ticks seems enough to wakeup something like SLIP driver */
- tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
+ tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
SERIAL_XMIT_SIZE - 1 : tmp);
-
+
/* Receiver timeout will be transmission time for 1.5 chars */
tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud;
tmp = (tmp > 0xff) ? 0xff : tmp;
@@ -1205,29 +1203,29 @@
cor1 |= COR1_8BITS;
break;
}
-
- if (C_CSTOPB(tty))
+
+ if (C_CSTOPB(tty))
cor1 |= COR1_2SB;
-
+
cor1 |= COR1_IGNORE;
if (C_PARENB(tty)) {
cor1 |= COR1_NORMPAR;
- if (C_PARODD(tty))
+ if (C_PARODD(tty))
cor1 |= COR1_ODDP;
- if (I_INPCK(tty))
+ if (I_INPCK(tty))
cor1 &= ~COR1_IGNORE;
}
/* Set marking of some errors */
port->mark_mask = RCSR_OE | RCSR_TOUT;
- if (I_INPCK(tty))
+ if (I_INPCK(tty))
port->mark_mask |= RCSR_FE | RCSR_PE;
- if (I_BRKINT(tty) || I_PARMRK(tty))
+ if (I_BRKINT(tty) || I_PARMRK(tty))
port->mark_mask |= RCSR_BREAK;
- if (I_IGNPAR(tty))
+ if (I_IGNPAR(tty))
port->mark_mask &= ~(RCSR_FE | RCSR_PE);
if (I_IGNBRK(tty)) {
port->mark_mask &= ~RCSR_BREAK;
- if (I_IGNPAR(tty))
+ if (I_IGNPAR(tty))
/* Real raw mode. Ignore all */
port->mark_mask &= ~RCSR_OE;
}
@@ -1241,7 +1239,7 @@
tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR));
spin_unlock_irqrestore(&bp->lock, flags);
#else
- port->COR2 |= COR2_CTSAE;
+ port->COR2 |= COR2_CTSAE;
#endif
}
/* Enable Software Flow Control. FIXME: I'm not sure about this */
@@ -1264,11 +1262,11 @@
mcor1 |= MCOR1_CDZD;
mcor2 |= MCOR2_CDOD;
}
-
- if (C_CREAD(tty))
+
+ if (C_CREAD(tty))
/* Enable receiver */
port->IER |= IER_RXD;
-
+
/* Set input FIFO size (1-8 bytes) */
cor3 |= sx_rxfifo;
/* Setting up CD186x channel registers */
@@ -1311,11 +1309,11 @@
func_exit();
return 0;
}
-
+
if (!port->xmit_buf) {
/* We may sleep in get_zeroed_page() */
unsigned long tmp;
-
+
if (!(tmp = get_zeroed_page(GFP_KERNEL))) {
func_exit();
return -ENOMEM;
@@ -1328,10 +1326,10 @@
}
port->xmit_buf = (unsigned char *) tmp;
}
-
+
spin_lock_irqsave(&port->lock, flags);
- if (port->tty)
+ if (port->tty)
clear_bit(TTY_IO_ERROR, &port->tty->flags);
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
@@ -1340,7 +1338,7 @@
spin_unlock_irqrestore(&port->lock, flags);
-
+
func_exit();
return 0;
}
@@ -1352,14 +1350,14 @@
struct tty_struct *tty;
int i;
unsigned long flags;
-
+
func_enter();
if (!(port->flags & ASYNC_INITIALIZED)) {
func_exit();
return;
}
-
+
if (sx_debug & SX_DEBUG_FIFO) {
dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ",
board_No(bp), port_No(port), port->overrun);
@@ -1394,13 +1392,13 @@
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
port->flags &= ~ASYNC_INITIALIZED;
-
- if (!bp->count)
+
+ if (!bp->count)
sx_shutdown_board(bp);
func_exit();
}
-
+
static int block_til_ready(struct tty_struct *tty, struct file * filp,
struct specialix_port *port)
{
@@ -1427,7 +1425,7 @@
return -ERESTARTSYS;
}
}
-
+
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
@@ -1477,7 +1475,7 @@
if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
- retval = -ERESTARTSYS;
+ retval = -ERESTARTSYS;
break;
}
if (!(port->flags & ASYNC_CLOSING) &&
@@ -1506,7 +1504,7 @@
port->flags |= ASYNC_NORMAL_ACTIVE;
func_exit();
return 0;
-}
+}
static int sx_open(struct tty_struct * tty, struct file * filp)
@@ -1526,7 +1524,7 @@
func_exit();
return -ENODEV;
}
-
+
bp = &sx_board[board];
port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
port->overrun = 0;
@@ -1557,7 +1555,7 @@
func_enter();
return error;
}
-
+
if ((error = block_til_ready(tty, filp, port))) {
func_enter();
return error;
@@ -1574,7 +1572,7 @@
struct specialix_board *bp;
unsigned long flags;
unsigned long timeout;
-
+
func_enter();
if (!port || sx_paranoia_check(port, tty->name, "close")) {
func_exit();
@@ -1587,7 +1585,7 @@
func_exit();
return;
}
-
+
bp = port_Board(port);
if ((tty->count == 1) && (port->count != 1)) {
printk(KERN_ERR "sx%d: sx_close: bad port count;"
@@ -1607,7 +1605,7 @@
}
port->flags |= ASYNC_CLOSING;
/*
- * Now we wait for the transmit buffer to clear; and we notify
+ * Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
@@ -1681,7 +1679,7 @@
}
-static int sx_write(struct tty_struct * tty,
+static int sx_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
@@ -1694,7 +1692,7 @@
func_exit();
return 0;
}
-
+
bp = port_Board(port);
if (!tty || !port->xmit_buf || !tmp_buf) {
@@ -1824,7 +1822,7 @@
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
func_enter();
-
+
if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) {
func_exit();
return 0;
@@ -1881,13 +1879,13 @@
port_No(port), status, sx_in (bp, CD186x_CAR));
dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
if (SX_CRTSCTS(port->tty)) {
- result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
+ result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
| ((status & MSVR_DTR) ? TIOCM_RTS : 0)
| ((status & MSVR_CD) ? TIOCM_CAR : 0)
|/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
| ((status & MSVR_CTS) ? TIOCM_CTS : 0);
} else {
- result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
+ result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
| ((status & MSVR_DTR) ? TIOCM_DTR : 0)
| ((status & MSVR_CD) ? TIOCM_CAR : 0)
|/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
@@ -1955,7 +1953,7 @@
{
struct specialix_board *bp = port_Board(port);
unsigned long flags;
-
+
func_enter();
spin_lock_irqsave (&port->lock, flags);
@@ -1996,8 +1994,8 @@
func_enter();
return -EFAULT;
}
-
-#if 0
+
+#if 0
if ((tmp.irq != bp->irq) ||
(tmp.port != bp->base) ||
(tmp.type != PORT_CIRRUS) ||
@@ -2008,12 +2006,12 @@
func_exit();
return -EINVAL;
}
-#endif
+#endif
change_speed = ((port->flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
change_speed |= (tmp.custom_divisor != port->custom_divisor);
-
+
if (!capable(CAP_SYS_ADMIN)) {
if ((tmp.close_delay != port->close_delay) ||
(tmp.closing_wait != port->closing_wait) ||
@@ -2045,7 +2043,7 @@
{
struct serial_struct tmp;
struct specialix_board *bp = port_Board(port);
-
+
func_enter();
/*
@@ -2074,7 +2072,7 @@
}
-static int sx_ioctl(struct tty_struct * tty, struct file * filp,
+static int sx_ioctl(struct tty_struct * tty, struct file * filp,
unsigned int cmd, unsigned long arg)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
@@ -2087,7 +2085,7 @@
func_exit();
return -ENODEV;
}
-
+
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
@@ -2129,7 +2127,7 @@
case TIOCGSERIAL:
func_exit();
return sx_get_serial_info(port, argp);
- case TIOCSSERIAL:
+ case TIOCSSERIAL:
func_exit();
return sx_set_serial_info(port, argp);
default:
@@ -2153,16 +2151,16 @@
func_exit();
return;
}
-
+
bp = port_Board(port);
-
+
/* Use DTR instead of RTS ! */
- if (SX_CRTSCTS (tty))
+ if (SX_CRTSCTS (tty))
port->MSVR &= ~MSVR_DTR;
else {
/* Auch!!! I think the system shouldn't call this then. */
/* Or maybe we're supposed (allowed?) to do our side of hw
- handshake anyway, even when hardware handshake is off.
+ handshake anyway, even when hardware handshake is off.
When you see this in your logs, please report.... */
printk (KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n",
port_No (port));
@@ -2193,14 +2191,14 @@
unsigned long flags;
func_enter();
-
+
if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) {
func_exit();
return;
}
-
+
bp = port_Board(port);
-
+
spin_lock_irqsave(&port->lock, flags);
/* XXXX Use DTR INSTEAD???? */
if (SX_CRTSCTS(tty)) {
@@ -2234,14 +2232,14 @@
unsigned long flags;
func_enter();
-
+
if (sx_paranoia_check(port, tty->name, "sx_stop")) {
func_exit();
return;
}
bp = port_Board(port);
-
+
spin_lock_irqsave(&port->lock, flags);
port->IER &= ~IER_TXRDY;
spin_lock_irqsave(&bp->lock, flags);
@@ -2261,14 +2259,14 @@
unsigned long flags;
func_enter();
-
+
if (sx_paranoia_check(port, tty->name, "sx_start")) {
func_exit();
return;
}
-
+
bp = port_Board(port);
-
+
spin_lock_irqsave(&port->lock, flags);
if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
@@ -2290,13 +2288,13 @@
*
* serial interrupt routine -> (workqueue) ->
* do_sx_hangup() -> tty->hangup() -> sx_hangup()
- *
+ *
*/
static void do_sx_hangup(void *private_)
{
struct specialix_port *port = (struct specialix_port *) private_;
struct tty_struct *tty;
-
+
func_enter();
tty = port->tty;
@@ -2319,9 +2317,9 @@
func_exit();
return;
}
-
+
bp = port_Board(port);
-
+
sx_shutdown_port(bp, port);
spin_lock_irqsave(&port->lock, flags);
port->event = 0;
@@ -2346,10 +2344,10 @@
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
struct specialix_board * bp;
-
+
if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
return;
-
+
if (tty->termios->c_cflag == old_termios->c_cflag &&
tty->termios->c_iflag == old_termios->c_iflag)
return;
@@ -2420,7 +2418,7 @@
func_exit();
return 1;
}
-
+
if (!(tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL))) {
printk(KERN_ERR "sx: Couldn't get free page.\n");
put_tty_driver(specialix_driver);
@@ -2457,7 +2455,7 @@
init_waitqueue_head(&sx_port[i].close_wait);
spin_lock_init(&sx_port[i].lock);
}
-
+
func_exit();
return 0;
}
@@ -2472,8 +2470,8 @@
func_exit();
}
-/*
- * This routine must be called by kernel at boot time
+/*
+ * This routine must be called by kernel at boot time
*/
static int __init specialix_init(void)
{
@@ -2489,7 +2487,7 @@
#else
printk (KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
#endif
-
+
for (i = 0; i < SX_NBOARD; i++)
sx_board[i].lock = SPIN_LOCK_UNLOCKED;
@@ -2498,7 +2496,7 @@
return -EIO;
}
- for (i = 0; i < SX_NBOARD; i++)
+ for (i = 0; i < SX_NBOARD; i++)
if (sx_board[i].base && !sx_probe(&sx_board[i]))
found++;
@@ -2512,8 +2510,8 @@
i++;
continue;
}
- pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX,
- PCI_DEVICE_ID_SPECIALIX_IO8,
+ pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX,
+ PCI_DEVICE_ID_SPECIALIX_IO8,
pdev);
if (!pdev) break;
@@ -2557,10 +2555,10 @@
/*
* You can setup up to 4 boards.
* by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter.
- * You should specify the IRQs too in that case "irq=....,...".
- *
+ * You should specify the IRQs too in that case "irq=....,...".
+ *
* More than 4 boards in one computer is not possible, as the card can
- * only use 4 different interrupts.
+ * only use 4 different interrupts.
*
*/
static int __init specialix_init_module(void)
@@ -2583,16 +2581,16 @@
return specialix_init();
}
-
+
static void __exit specialix_exit_module(void)
{
int i;
-
+
func_enter();
sx_release_drivers();
for (i = 0; i < SX_NBOARD; i++)
- if (sx_board[i].flags & SX_BOARD_PRESENT)
+ if (sx_board[i].flags & SX_BOARD_PRESENT)
sx_release_io_range(&sx_board[i]);
#ifdef SPECIALIX_TIMER
del_timer (&missed_irq_timer);
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 951545a..1c68641 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -3095,7 +3095,9 @@
devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i),
S_IFCHR|S_IRUSR|S_IWUSR,
"staliomem/%d", i);
- class_device_create(stallion_class, MKDEV(STL_SIOMEMMAJOR, i), NULL, "staliomem%d", i);
+ class_device_create(stallion_class, NULL,
+ MKDEV(STL_SIOMEMMAJOR, i), NULL,
+ "staliomem%d", i);
}
stl_serial->owner = THIS_MODULE;
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index ea2d54b..0133dc0 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -912,6 +912,7 @@
MODULE_LICENSE("GPL");
static struct pci_driver synclink_pci_driver = {
+ .owner = THIS_MODULE,
.name = "synclink",
.id_table = synclink_pci_tbl,
.probe = synclink_init_one,
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 6fb165c..f185724 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -500,6 +500,7 @@
MODULE_LICENSE("GPL");
static struct pci_driver synclinkmp_pci_driver = {
+ .owner = THIS_MODULE,
.name = "synclinkmp",
.id_table = synclinkmp_pci_tbl,
.probe = synclinkmp_init_one,
diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c
index ec78d2f..41a94bc 100644
--- a/drivers/char/tipar.c
+++ b/drivers/char/tipar.c
@@ -436,7 +436,7 @@
goto out;
}
- class_device_create(tipar_class, MKDEV(TIPAR_MAJOR,
+ class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR,
TIPAR_MINOR + nr), NULL, "par%d", nr);
/* Use devfs, tree: /dev/ticables/par/[0..2] */
err = devfs_mk_cdev(MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr),
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
new file mode 100644
index 0000000..18cdd43
--- /dev/null
+++ b/drivers/char/tlclk.c
@@ -0,0 +1,896 @@
+/*
+ * Telecom Clock driver for Intel NetStructure(tm) MPCBL0010
+ *
+ * Copyright (C) 2005 Kontron Canada
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <sebastien.bouchard@ca.kontron.com> and the current
+ * Maintainer <mark.gross@intel.com>
+ *
+ * Description : This is the TELECOM CLOCK module driver for the ATCA
+ * MPCBL0010 ATCA computer.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h> /* printk() */
+#include <linux/fs.h> /* everything... */
+#include <linux/errno.h> /* error codes */
+#include <linux/delay.h> /* udelay */
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <asm/io.h> /* inb/outb */
+#include <asm/uaccess.h>
+
+MODULE_AUTHOR("Sebastien Bouchard <sebastien.bouchard@ca.kontron.com>");
+MODULE_LICENSE("GPL");
+
+/*Hardware Reset of the PLL */
+#define RESET_ON 0x00
+#define RESET_OFF 0x01
+
+/* MODE SELECT */
+#define NORMAL_MODE 0x00
+#define HOLDOVER_MODE 0x10
+#define FREERUN_MODE 0x20
+
+/* FILTER SELECT */
+#define FILTER_6HZ 0x04
+#define FILTER_12HZ 0x00
+
+/* SELECT REFERENCE FREQUENCY */
+#define REF_CLK1_8kHz 0x00
+#define REF_CLK2_19_44MHz 0x02
+
+/* Select primary or secondary redundant clock */
+#define PRIMARY_CLOCK 0x00
+#define SECONDARY_CLOCK 0x01
+
+/* CLOCK TRANSMISSION DEFINE */
+#define CLK_8kHz 0xff
+#define CLK_16_384MHz 0xfb
+
+#define CLK_1_544MHz 0x00
+#define CLK_2_048MHz 0x01
+#define CLK_4_096MHz 0x02
+#define CLK_6_312MHz 0x03
+#define CLK_8_192MHz 0x04
+#define CLK_19_440MHz 0x06
+
+#define CLK_8_592MHz 0x08
+#define CLK_11_184MHz 0x09
+#define CLK_34_368MHz 0x0b
+#define CLK_44_736MHz 0x0a
+
+/* RECEIVED REFERENCE */
+#define AMC_B1 0
+#define AMC_B2 1
+
+/* HARDWARE SWITCHING DEFINE */
+#define HW_ENABLE 0x80
+#define HW_DISABLE 0x00
+
+/* HARDWARE SWITCHING MODE DEFINE */
+#define PLL_HOLDOVER 0x40
+#define LOST_CLOCK 0x00
+
+/* ALARMS DEFINE */
+#define UNLOCK_MASK 0x10
+#define HOLDOVER_MASK 0x20
+#define SEC_LOST_MASK 0x40
+#define PRI_LOST_MASK 0x80
+
+/* INTERRUPT CAUSE DEFINE */
+
+#define PRI_LOS_01_MASK 0x01
+#define PRI_LOS_10_MASK 0x02
+
+#define SEC_LOS_01_MASK 0x04
+#define SEC_LOS_10_MASK 0x08
+
+#define HOLDOVER_01_MASK 0x10
+#define HOLDOVER_10_MASK 0x20
+
+#define UNLOCK_01_MASK 0x40
+#define UNLOCK_10_MASK 0x80
+
+struct tlclk_alarms {
+ __u32 lost_clocks;
+ __u32 lost_primary_clock;
+ __u32 lost_secondary_clock;
+ __u32 primary_clock_back;
+ __u32 secondary_clock_back;
+ __u32 switchover_primary;
+ __u32 switchover_secondary;
+ __u32 pll_holdover;
+ __u32 pll_end_holdover;
+ __u32 pll_lost_sync;
+ __u32 pll_sync;
+};
+/* Telecom clock I/O register definition */
+#define TLCLK_BASE 0xa08
+#define TLCLK_REG0 TLCLK_BASE
+#define TLCLK_REG1 (TLCLK_BASE+1)
+#define TLCLK_REG2 (TLCLK_BASE+2)
+#define TLCLK_REG3 (TLCLK_BASE+3)
+#define TLCLK_REG4 (TLCLK_BASE+4)
+#define TLCLK_REG5 (TLCLK_BASE+5)
+#define TLCLK_REG6 (TLCLK_BASE+6)
+#define TLCLK_REG7 (TLCLK_BASE+7)
+
+#define SET_PORT_BITS(port, mask, val) outb(((inb(port) & mask) | val), port)
+
+/* 0 = Dynamic allocation of the major device number */
+#define TLCLK_MAJOR 0
+
+/* sysfs interface definition:
+Upon loading the driver will create a sysfs directory under
+/sys/devices/platform/telco_clock.
+
+This directory exports the following interfaces. There operation is
+documented in the MCPBL0010 TPS under the Telecom Clock API section, 11.4.
+alarms :
+current_ref :
+enable_clk3a_output :
+enable_clk3b_output :
+enable_clka0_output :
+enable_clka1_output :
+enable_clkb0_output :
+enable_clkb1_output :
+filter_select :
+hardware_switching :
+hardware_switching_mode :
+interrupt_switch :
+mode_select :
+refalign :
+reset :
+select_amcb1_transmit_clock :
+select_amcb2_transmit_clock :
+select_redundant_clock :
+select_ref_frequency :
+test_mode :
+
+All sysfs interfaces are integers in hex format, i.e echo 99 > refalign
+has the same effect as echo 0x99 > refalign.
+*/
+
+static unsigned int telclk_interrupt;
+
+static int int_events; /* Event that generate a interrupt */
+static int got_event; /* if events processing have been done */
+
+static void switchover_timeout(unsigned long data);
+static struct timer_list switchover_timer =
+ TIMER_INITIALIZER(switchover_timeout , 0, 0);
+
+static struct tlclk_alarms *alarm_events;
+
+static DEFINE_SPINLOCK(event_lock);
+
+static int tlclk_major = TLCLK_MAJOR;
+
+static irqreturn_t tlclk_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+static int tlclk_open(struct inode *inode, struct file *filp)
+{
+ int result;
+
+ /* Make sure there is no interrupt pending while
+ * initialising interrupt handler */
+ inb(TLCLK_REG6);
+
+ /* This device is wired through the FPGA IO space of the ATCA blade
+ * we can't share this IRQ */
+ result = request_irq(telclk_interrupt, &tlclk_interrupt,
+ SA_INTERRUPT, "telco_clock", tlclk_interrupt);
+ if (result == -EBUSY) {
+ printk(KERN_ERR "telco_clock: Interrupt can't be reserved!\n");
+ return -EBUSY;
+ }
+ inb(TLCLK_REG6); /* Clear interrupt events */
+
+ return 0;
+}
+
+static int tlclk_release(struct inode *inode, struct file *filp)
+{
+ free_irq(telclk_interrupt, tlclk_interrupt);
+
+ return 0;
+}
+
+ssize_t tlclk_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *f_pos)
+{
+ if (count < sizeof(struct tlclk_alarms))
+ return -EIO;
+
+ wait_event_interruptible(wq, got_event);
+ if (copy_to_user(buf, alarm_events, sizeof(struct tlclk_alarms)))
+ return -EFAULT;
+
+ memset(alarm_events, 0, sizeof(struct tlclk_alarms));
+ got_event = 0;
+
+ return sizeof(struct tlclk_alarms);
+}
+
+ssize_t tlclk_write(struct file *filp, const char __user *buf, size_t count,
+ loff_t *f_pos)
+{
+ return 0;
+}
+
+static struct file_operations tlclk_fops = {
+ .read = tlclk_read,
+ .write = tlclk_write,
+ .open = tlclk_open,
+ .release = tlclk_release,
+
+};
+
+static struct miscdevice tlclk_miscdev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "telco_clock",
+ .fops = &tlclk_fops,
+};
+
+static ssize_t show_current_ref(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned long ret_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ ret_val = ((inb(TLCLK_REG1) & 0x08) >> 3);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static DEVICE_ATTR(current_ref, S_IRUGO, show_current_ref, NULL);
+
+
+static ssize_t show_interrupt_switch(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned long ret_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ ret_val = inb(TLCLK_REG6);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static DEVICE_ATTR(interrupt_switch, S_IRUGO,
+ show_interrupt_switch, NULL);
+
+static ssize_t show_alarms(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned long ret_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ ret_val = (inb(TLCLK_REG2) & 0xf0);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t store_enable_clk3b_output(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, ": tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG3, 0x7f, val << 7);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(enable_clk3b_output, S_IWUGO, NULL,
+ store_enable_clk3b_output);
+
+static ssize_t store_enable_clk3a_output(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG3, 0xbf, val << 6);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(enable_clk3a_output, S_IWUGO, NULL,
+ store_enable_clk3a_output);
+
+static ssize_t store_enable_clkb1_output(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG2, 0xf7, val << 3);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(enable_clkb1_output, S_IWUGO, NULL,
+ store_enable_clkb1_output);
+
+
+static ssize_t store_enable_clka1_output(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG2, 0xfb, val << 2);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(enable_clka1_output, S_IWUGO, NULL,
+ store_enable_clka1_output);
+
+static ssize_t store_enable_clkb0_output(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG2, 0xfd, val << 1);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(enable_clkb0_output, S_IWUGO, NULL,
+ store_enable_clkb0_output);
+
+static ssize_t store_enable_clka0_output(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG2, 0xfe, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(enable_clka0_output, S_IWUGO, NULL,
+ store_enable_clka0_output);
+
+static ssize_t store_test_mode(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG4, 0xfd, 2);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(test_mode, S_IWUGO, NULL, store_test_mode);
+
+static ssize_t store_select_amcb2_transmit_clock(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long flags;
+ unsigned long tmp;
+ unsigned char val;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x28);
+ SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
+ } else if (val >= CLK_8_592MHz) {
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x38);
+ switch (val) {
+ case CLK_8_592MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+ break;
+ case CLK_11_184MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
+ break;
+ case CLK_34_368MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
+ break;
+ case CLK_44_736MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+ break;
+ }
+ } else
+ SET_PORT_BITS(TLCLK_REG3, 0xc7, val << 3);
+
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(select_amcb2_transmit_clock, S_IWUGO, NULL,
+ store_select_amcb2_transmit_clock);
+
+static ssize_t store_select_amcb1_transmit_clock(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x5);
+ SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
+ } else if (val >= CLK_8_592MHz) {
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x7);
+ switch (val) {
+ case CLK_8_592MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+ break;
+ case CLK_11_184MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
+ break;
+ case CLK_34_368MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
+ break;
+ case CLK_44_736MHz:
+ SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+ break;
+ }
+ } else
+ SET_PORT_BITS(TLCLK_REG3, 0xf8, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(select_amcb1_transmit_clock, S_IWUGO, NULL,
+ store_select_amcb1_transmit_clock);
+
+static ssize_t store_select_redundant_clock(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG1, 0xfe, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(select_redundant_clock, S_IWUGO, NULL,
+ store_select_redundant_clock);
+
+static ssize_t store_select_ref_frequency(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG1, 0xfd, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(select_ref_frequency, S_IWUGO, NULL,
+ store_select_ref_frequency);
+
+static ssize_t store_filter_select(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0xfb, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(filter_select, S_IWUGO, NULL, store_filter_select);
+
+static ssize_t store_hardware_switching_mode(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0xbf, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(hardware_switching_mode, S_IWUGO, NULL,
+ store_hardware_switching_mode);
+
+static ssize_t store_hardware_switching(struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0x7f, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(hardware_switching, S_IWUGO, NULL,
+ store_hardware_switching);
+
+static ssize_t store_refalign (struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
+ udelay(2);
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0x08);
+ udelay(2);
+ SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(refalign, S_IWUGO, NULL, store_refalign);
+
+static ssize_t store_mode_select (struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG0, 0xcf, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(mode_select, S_IWUGO, NULL, store_mode_select);
+
+static ssize_t store_reset (struct device *d,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+ unsigned char val;
+ unsigned long flags;
+
+ sscanf(buf, "%lX", &tmp);
+ dev_dbg(d, "tmp = 0x%lX\n", tmp);
+
+ val = (unsigned char)tmp;
+ spin_lock_irqsave(&event_lock, flags);
+ SET_PORT_BITS(TLCLK_REG4, 0xfd, val);
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(reset, S_IWUGO, NULL, store_reset);
+
+static struct attribute *tlclk_sysfs_entries[] = {
+ &dev_attr_current_ref.attr,
+ &dev_attr_interrupt_switch.attr,
+ &dev_attr_alarms.attr,
+ &dev_attr_enable_clk3a_output.attr,
+ &dev_attr_enable_clk3b_output.attr,
+ &dev_attr_enable_clkb1_output.attr,
+ &dev_attr_enable_clka1_output.attr,
+ &dev_attr_enable_clkb0_output.attr,
+ &dev_attr_enable_clka0_output.attr,
+ &dev_attr_test_mode.attr,
+ &dev_attr_select_amcb1_transmit_clock.attr,
+ &dev_attr_select_amcb2_transmit_clock.attr,
+ &dev_attr_select_redundant_clock.attr,
+ &dev_attr_select_ref_frequency.attr,
+ &dev_attr_filter_select.attr,
+ &dev_attr_hardware_switching_mode.attr,
+ &dev_attr_hardware_switching.attr,
+ &dev_attr_refalign.attr,
+ &dev_attr_mode_select.attr,
+ &dev_attr_reset.attr,
+ NULL
+};
+
+static struct attribute_group tlclk_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = tlclk_sysfs_entries,
+};
+
+static struct platform_device *tlclk_device;
+
+static int __init tlclk_init(void)
+{
+ int ret;
+
+ ret = register_chrdev(tlclk_major, "telco_clock", &tlclk_fops);
+ if (ret < 0) {
+ printk(KERN_ERR "telco_clock: can't get major! %d\n", tlclk_major);
+ return ret;
+ }
+ alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
+ if (!alarm_events)
+ goto out1;
+
+ /* Read telecom clock IRQ number (Set by BIOS) */
+ if (!request_region(TLCLK_BASE, 8, "telco_clock")) {
+ printk(KERN_ERR "tlclk: request_region failed! 0x%X\n",
+ TLCLK_BASE);
+ ret = -EBUSY;
+ goto out2;
+ }
+ telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
+
+ if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
+ printk(KERN_ERR "telclk_interrup = 0x%x non-mcpbl0010 hw\n",
+ telclk_interrupt);
+ ret = -ENXIO;
+ goto out3;
+ }
+
+ init_timer(&switchover_timer);
+
+ ret = misc_register(&tlclk_miscdev);
+ if (ret < 0) {
+ printk(KERN_ERR " misc_register retruns %d\n", ret);
+ ret = -EBUSY;
+ goto out3;
+ }
+
+ tlclk_device = platform_device_register_simple("telco_clock",
+ -1, NULL, 0);
+ if (!tlclk_device) {
+ printk(KERN_ERR " platform_device_register retruns 0x%X\n",
+ (unsigned int) tlclk_device);
+ ret = -EBUSY;
+ goto out4;
+ }
+
+ ret = sysfs_create_group(&tlclk_device->dev.kobj,
+ &tlclk_attribute_group);
+ if (ret) {
+ printk(KERN_ERR "failed to create sysfs device attributes\n");
+ sysfs_remove_group(&tlclk_device->dev.kobj,
+ &tlclk_attribute_group);
+ goto out5;
+ }
+
+ return 0;
+out5:
+ platform_device_unregister(tlclk_device);
+out4:
+ misc_deregister(&tlclk_miscdev);
+out3:
+ release_region(TLCLK_BASE, 8);
+out2:
+ kfree(alarm_events);
+out1:
+ unregister_chrdev(tlclk_major, "telco_clock");
+ return ret;
+}
+
+static void __exit tlclk_cleanup(void)
+{
+ sysfs_remove_group(&tlclk_device->dev.kobj, &tlclk_attribute_group);
+ platform_device_unregister(tlclk_device);
+ misc_deregister(&tlclk_miscdev);
+ unregister_chrdev(tlclk_major, "telco_clock");
+
+ release_region(TLCLK_BASE, 8);
+ del_timer_sync(&switchover_timer);
+ kfree(alarm_events);
+
+}
+
+static void switchover_timeout(unsigned long data)
+{
+ if ((data & 1)) {
+ if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+ alarm_events->switchover_primary++;
+ } else {
+ if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+ alarm_events->switchover_secondary++;
+ }
+
+ /* Alarm processing is done, wake up read task */
+ del_timer(&switchover_timer);
+ got_event = 1;
+ wake_up(&wq);
+}
+
+static irqreturn_t tlclk_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&event_lock, flags);
+ /* Read and clear interrupt events */
+ int_events = inb(TLCLK_REG6);
+
+ /* Primary_Los changed from 0 to 1 ? */
+ if (int_events & PRI_LOS_01_MASK) {
+ if (inb(TLCLK_REG2) & SEC_LOST_MASK)
+ alarm_events->lost_clocks++;
+ else
+ alarm_events->lost_primary_clock++;
+ }
+
+ /* Primary_Los changed from 1 to 0 ? */
+ if (int_events & PRI_LOS_10_MASK) {
+ alarm_events->primary_clock_back++;
+ SET_PORT_BITS(TLCLK_REG1, 0xFE, 1);
+ }
+ /* Secondary_Los changed from 0 to 1 ? */
+ if (int_events & SEC_LOS_01_MASK) {
+ if (inb(TLCLK_REG2) & PRI_LOST_MASK)
+ alarm_events->lost_clocks++;
+ else
+ alarm_events->lost_secondary_clock++;
+ }
+ /* Secondary_Los changed from 1 to 0 ? */
+ if (int_events & SEC_LOS_10_MASK) {
+ alarm_events->secondary_clock_back++;
+ SET_PORT_BITS(TLCLK_REG1, 0xFE, 0);
+ }
+ if (int_events & HOLDOVER_10_MASK)
+ alarm_events->pll_end_holdover++;
+
+ if (int_events & UNLOCK_01_MASK)
+ alarm_events->pll_lost_sync++;
+
+ if (int_events & UNLOCK_10_MASK)
+ alarm_events->pll_sync++;
+
+ /* Holdover changed from 0 to 1 ? */
+ if (int_events & HOLDOVER_01_MASK) {
+ alarm_events->pll_holdover++;
+
+ /* TIMEOUT in ~10ms */
+ switchover_timer.expires = jiffies + msecs_to_jiffies(10);
+ switchover_timer.data = inb(TLCLK_REG1);
+ add_timer(&switchover_timer);
+ } else {
+ got_event = 1;
+ wake_up(&wq);
+ }
+ spin_unlock_irqrestore(&event_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+module_init(tlclk_init);
+module_exit(tlclk_cleanup);
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 049d128..303f158 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -64,7 +64,7 @@
if (count == 0)
return -ENODATA;
if (count > bufsiz) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"invalid count value %x %zx \n", count, bufsiz);
return -E2BIG;
}
@@ -72,21 +72,21 @@
down(&chip->tpm_mutex);
if ((rc = chip->vendor->send(chip, (u8 *) buf, count)) < 0) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"tpm_transmit: tpm_send: error %zd\n", rc);
goto out;
}
stop = jiffies + 2 * 60 * HZ;
do {
- u8 status = inb(chip->vendor->base + 1);
+ u8 status = chip->vendor->status(chip);
if ((status & chip->vendor->req_complete_mask) ==
chip->vendor->req_complete_val) {
goto out_recv;
}
if ((status == chip->vendor->req_canceled)) {
- dev_err(&chip->pci_dev->dev, "Operation Canceled\n");
+ dev_err(chip->dev, "Operation Canceled\n");
rc = -ECANCELED;
goto out;
}
@@ -97,14 +97,14 @@
chip->vendor->cancel(chip);
- dev_err(&chip->pci_dev->dev, "Operation Timed out\n");
+ dev_err(chip->dev, "Operation Timed out\n");
rc = -ETIME;
goto out;
out_recv:
rc = chip->vendor->recv(chip, (u8 *) buf, bufsiz);
if (rc < 0)
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"tpm_transmit: tpm_recv: error %zd\n", rc);
out:
up(&chip->tpm_mutex);
@@ -139,15 +139,14 @@
__be32 index;
char *str = buf;
- struct tpm_chip *chip =
- pci_get_drvdata(to_pci_dev(dev));
+ struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL)
return -ENODEV;
memcpy(data, cap_pcr, sizeof(cap_pcr));
if ((len = tpm_transmit(chip, data, sizeof(data)))
< CAP_PCR_RESULT_SIZE) {
- dev_dbg(&chip->pci_dev->dev, "A TPM error (%d) occurred "
+ dev_dbg(chip->dev, "A TPM error (%d) occurred "
"attempting to determine the number of PCRS\n",
be32_to_cpu(*((__be32 *) (data + 6))));
return 0;
@@ -161,9 +160,10 @@
memcpy(data + 10, &index, 4);
if ((len = tpm_transmit(chip, data, sizeof(data)))
< READ_PCR_RESULT_SIZE){
- dev_dbg(&chip->pci_dev->dev, "A TPM error (%d) occurred"
+ dev_dbg(chip->dev, "A TPM error (%d) occurred"
" attempting to read PCR %d of %d\n",
- be32_to_cpu(*((__be32 *) (data + 6))), i, num_pcrs);
+ be32_to_cpu(*((__be32 *) (data + 6))),
+ i, num_pcrs);
goto out;
}
str += sprintf(str, "PCR-%02d: ", i);
@@ -191,21 +191,19 @@
int i, rc;
char *str = buf;
- struct tpm_chip *chip =
- pci_get_drvdata(to_pci_dev(dev));
+ struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL)
return -ENODEV;
- data = kmalloc(READ_PUBEK_RESULT_SIZE, GFP_KERNEL);
+ data = kzalloc(READ_PUBEK_RESULT_SIZE, GFP_KERNEL);
if (!data)
return -ENOMEM;
memcpy(data, readpubek, sizeof(readpubek));
- memset(data + sizeof(readpubek), 0, 20); /* zero nonce */
if ((len = tpm_transmit(chip, data, READ_PUBEK_RESULT_SIZE)) <
READ_PUBEK_RESULT_SIZE) {
- dev_dbg(&chip->pci_dev->dev, "A TPM error (%d) occurred "
+ dev_dbg(chip->dev, "A TPM error (%d) occurred "
"attempting to read the PUBEK\n",
be32_to_cpu(*((__be32 *) (data + 6))));
rc = 0;
@@ -245,7 +243,6 @@
kfree(data);
return rc;
}
-
EXPORT_SYMBOL_GPL(tpm_show_pubek);
#define CAP_VER_RESULT_SIZE 18
@@ -274,8 +271,7 @@
ssize_t len;
char *str = buf;
- struct tpm_chip *chip =
- pci_get_drvdata(to_pci_dev(dev));
+ struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL)
return -ENODEV;
@@ -315,7 +311,6 @@
}
EXPORT_SYMBOL_GPL(tpm_store_cancel);
-
/*
* Device file system interface to the TPM
*/
@@ -339,21 +334,20 @@
}
if (chip->num_opens) {
- dev_dbg(&chip->pci_dev->dev,
- "Another process owns this TPM\n");
+ dev_dbg(chip->dev, "Another process owns this TPM\n");
rc = -EBUSY;
goto err_out;
}
chip->num_opens++;
- pci_dev_get(chip->pci_dev);
+ get_device(chip->dev);
spin_unlock(&driver_lock);
chip->data_buffer = kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL);
if (chip->data_buffer == NULL) {
chip->num_opens--;
- pci_dev_put(chip->pci_dev);
+ put_device(chip->dev);
return -ENOMEM;
}
@@ -366,7 +360,6 @@
spin_unlock(&driver_lock);
return rc;
}
-
EXPORT_SYMBOL_GPL(tpm_open);
int tpm_release(struct inode *inode, struct file *file)
@@ -378,15 +371,14 @@
chip->num_opens--;
del_singleshot_timer_sync(&chip->user_read_timer);
atomic_set(&chip->data_pending, 0);
- pci_dev_put(chip->pci_dev);
+ put_device(chip->dev);
kfree(chip->data_buffer);
spin_unlock(&driver_lock);
return 0;
}
-
EXPORT_SYMBOL_GPL(tpm_release);
-ssize_t tpm_write(struct file * file, const char __user * buf,
+ssize_t tpm_write(struct file *file, const char __user *buf,
size_t size, loff_t * off)
{
struct tpm_chip *chip = file->private_data;
@@ -422,7 +414,7 @@
EXPORT_SYMBOL_GPL(tpm_write);
-ssize_t tpm_read(struct file * file, char __user * buf,
+ssize_t tpm_read(struct file * file, char __user *buf,
size_t size, loff_t * off)
{
struct tpm_chip *chip = file->private_data;
@@ -444,15 +436,14 @@
return ret_size;
}
-
EXPORT_SYMBOL_GPL(tpm_read);
-void __devexit tpm_remove(struct pci_dev *pci_dev)
+void tpm_remove_hardware(struct device *dev)
{
- struct tpm_chip *chip = pci_get_drvdata(pci_dev);
+ struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL) {
- dev_err(&pci_dev->dev, "No device data found\n");
+ dev_err(dev, "No device data found\n");
return;
}
@@ -462,22 +453,20 @@
spin_unlock(&driver_lock);
- pci_set_drvdata(pci_dev, NULL);
+ dev_set_drvdata(dev, NULL);
misc_deregister(&chip->vendor->miscdev);
kfree(chip->vendor->miscdev.name);
- sysfs_remove_group(&pci_dev->dev.kobj, chip->vendor->attr_group);
+ sysfs_remove_group(&dev->kobj, chip->vendor->attr_group);
- pci_disable_device(pci_dev);
-
- dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES ] &= !(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES));
+ dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES ] &=
+ !(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES));
kfree(chip);
- pci_dev_put(pci_dev);
+ put_device(dev);
}
-
-EXPORT_SYMBOL_GPL(tpm_remove);
+EXPORT_SYMBOL_GPL(tpm_remove_hardware);
static u8 savestate[] = {
0, 193, /* TPM_TAG_RQU_COMMAND */
@@ -489,32 +478,30 @@
* We are about to suspend. Save the TPM state
* so that it can be restored.
*/
-int tpm_pm_suspend(struct pci_dev *pci_dev, pm_message_t pm_state)
+int tpm_pm_suspend(struct device *dev, pm_message_t pm_state)
{
- struct tpm_chip *chip = pci_get_drvdata(pci_dev);
+ struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL)
return -ENODEV;
tpm_transmit(chip, savestate, sizeof(savestate));
return 0;
}
-
EXPORT_SYMBOL_GPL(tpm_pm_suspend);
/*
* Resume from a power safe. The BIOS already restored
* the TPM state.
*/
-int tpm_pm_resume(struct pci_dev *pci_dev)
+int tpm_pm_resume(struct device *dev)
{
- struct tpm_chip *chip = pci_get_drvdata(pci_dev);
+ struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL)
return -ENODEV;
return 0;
}
-
EXPORT_SYMBOL_GPL(tpm_pm_resume);
/*
@@ -524,8 +511,7 @@
* upon errant exit from this function specific probe function should call
* pci_disable_device
*/
-int tpm_register_hardware(struct pci_dev *pci_dev,
- struct tpm_vendor_specific *entry)
+int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry)
{
#define DEVNAME_SIZE 7
@@ -534,12 +520,10 @@
int i, j;
/* Driver specific per-device data */
- chip = kmalloc(sizeof(*chip), GFP_KERNEL);
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
- memset(chip, 0, sizeof(struct tpm_chip));
-
init_MUTEX(&chip->buffer_mutex);
init_MUTEX(&chip->tpm_mutex);
INIT_LIST_HEAD(&chip->list);
@@ -563,8 +547,7 @@
dev_num_search_complete:
if (chip->dev_num < 0) {
- dev_err(&pci_dev->dev,
- "No available tpm device numbers\n");
+ dev_err(dev, "No available tpm device numbers\n");
kfree(chip);
return -ENODEV;
} else if (chip->dev_num == 0)
@@ -576,15 +559,15 @@
scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm", chip->dev_num);
chip->vendor->miscdev.name = devname;
- chip->vendor->miscdev.dev = &(pci_dev->dev);
- chip->pci_dev = pci_dev_get(pci_dev);
+ chip->vendor->miscdev.dev = dev;
+ chip->dev = get_device(dev);
if (misc_register(&chip->vendor->miscdev)) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"unable to misc_register %s, minor %d\n",
chip->vendor->miscdev.name,
chip->vendor->miscdev.minor);
- pci_dev_put(pci_dev);
+ put_device(dev);
kfree(chip);
dev_mask[i] &= !(1 << j);
return -ENODEV;
@@ -592,17 +575,16 @@
spin_lock(&driver_lock);
- pci_set_drvdata(pci_dev, chip);
+ dev_set_drvdata(dev, chip);
list_add(&chip->list, &tpm_chip_list);
spin_unlock(&driver_lock);
- sysfs_create_group(&pci_dev->dev.kobj, chip->vendor->attr_group);
+ sysfs_create_group(&dev->kobj, chip->vendor->attr_group);
return 0;
}
-
EXPORT_SYMBOL_GPL(tpm_register_hardware);
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 373b41f..024814b 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -55,12 +55,13 @@
int (*recv) (struct tpm_chip *, u8 *, size_t);
int (*send) (struct tpm_chip *, u8 *, size_t);
void (*cancel) (struct tpm_chip *);
+ u8 (*status) (struct tpm_chip *);
struct miscdevice miscdev;
struct attribute_group *attr_group;
};
struct tpm_chip {
- struct pci_dev *pci_dev; /* PCI device stuff */
+ struct device *dev; /* Device stuff */
int dev_num; /* /dev/tpm# */
int num_opens; /* only one allowed */
@@ -91,13 +92,13 @@
outb(value & 0xFF, base+1);
}
-extern int tpm_register_hardware(struct pci_dev *,
+extern int tpm_register_hardware(struct device *,
struct tpm_vendor_specific *);
extern int tpm_open(struct inode *, struct file *);
extern int tpm_release(struct inode *, struct file *);
extern ssize_t tpm_write(struct file *, const char __user *, size_t,
loff_t *);
extern ssize_t tpm_read(struct file *, char __user *, size_t, loff_t *);
-extern void __devexit tpm_remove(struct pci_dev *);
-extern int tpm_pm_suspend(struct pci_dev *, pm_message_t);
-extern int tpm_pm_resume(struct pci_dev *);
+extern void tpm_remove_hardware(struct device *);
+extern int tpm_pm_suspend(struct device *, pm_message_t);
+extern int tpm_pm_resume(struct device *);
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index c0d6491..8cb42e8 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -40,7 +40,7 @@
ATML_STATUS_READY = 0x08
};
-static int tpm_atml_recv(struct tpm_chip *chip, u8 * buf, size_t count)
+static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
u8 status, *hdr = buf;
u32 size;
@@ -54,7 +54,7 @@
for (i = 0; i < 6; i++) {
status = inb(chip->vendor->base + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"error reading header\n");
return -EIO;
}
@@ -66,12 +66,12 @@
size = be32_to_cpu(*native_size);
if (count < size) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"Recv size(%d) less than available space\n", size);
for (; i < size; i++) { /* clear the waiting data anyway */
status = inb(chip->vendor->base + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"error reading data\n");
return -EIO;
}
@@ -83,7 +83,7 @@
for (; i < size; i++) {
status = inb(chip->vendor->base + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"error reading data\n");
return -EIO;
}
@@ -93,20 +93,20 @@
/* make sure data available is gone */
status = inb(chip->vendor->base + 1);
if (status & ATML_STATUS_DATA_AVAIL) {
- dev_err(&chip->pci_dev->dev, "data available is stuck\n");
+ dev_err(chip->dev, "data available is stuck\n");
return -EIO;
}
return size;
}
-static int tpm_atml_send(struct tpm_chip *chip, u8 * buf, size_t count)
+static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
{
int i;
- dev_dbg(&chip->pci_dev->dev, "tpm_atml_send: ");
+ dev_dbg(chip->dev, "tpm_atml_send:\n");
for (i = 0; i < count; i++) {
- dev_dbg(&chip->pci_dev->dev, "0x%x(%d) ", buf[i], buf[i]);
+ dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]);
outb(buf[i], chip->vendor->base);
}
@@ -118,6 +118,11 @@
outb(ATML_STATUS_ABORT, chip->vendor->base + 1);
}
+static u8 tpm_atml_status(struct tpm_chip *chip)
+{
+ return inb(chip->vendor->base + 1);
+}
+
static struct file_operations atmel_ops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -137,7 +142,7 @@
&dev_attr_pcrs.attr,
&dev_attr_caps.attr,
&dev_attr_cancel.attr,
- 0,
+ NULL,
};
static struct attribute_group atmel_attr_grp = { .attrs = atmel_attrs };
@@ -146,6 +151,7 @@
.recv = tpm_atml_recv,
.send = tpm_atml_send,
.cancel = tpm_atml_cancel,
+ .status = tpm_atml_status,
.req_complete_mask = ATML_STATUS_BUSY | ATML_STATUS_DATA_AVAIL,
.req_complete_val = ATML_STATUS_DATA_AVAIL,
.req_canceled = ATML_STATUS_READY,
@@ -153,86 +159,94 @@
.miscdev = { .fops = &atmel_ops, },
};
-static int __devinit tpm_atml_init(struct pci_dev *pci_dev,
- const struct pci_device_id *pci_id)
+static struct platform_device *pdev;
+
+static void __devexit tpm_atml_remove(struct device *dev)
{
- u8 version[4];
- int rc = 0;
- int lo, hi;
-
- if (pci_enable_device(pci_dev))
- return -EIO;
-
- lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
- hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
-
- tpm_atmel.base = (hi<<8)|lo;
- dev_dbg( &pci_dev->dev, "Operating with base: 0x%x\n", tpm_atmel.base);
-
- /* verify that it is an Atmel part */
- if (tpm_read_index(TPM_ADDR, 4) != 'A' || tpm_read_index(TPM_ADDR, 5) != 'T'
- || tpm_read_index(TPM_ADDR, 6) != 'M' || tpm_read_index(TPM_ADDR, 7) != 'L') {
- rc = -ENODEV;
- goto out_err;
+ struct tpm_chip *chip = dev_get_drvdata(dev);
+ if (chip) {
+ release_region(chip->vendor->base, 2);
+ tpm_remove_hardware(chip->dev);
}
-
- /* query chip for its version number */
- if ((version[0] = tpm_read_index(TPM_ADDR, 0x00)) != 0xFF) {
- version[1] = tpm_read_index(TPM_ADDR, 0x01);
- version[2] = tpm_read_index(TPM_ADDR, 0x02);
- version[3] = tpm_read_index(TPM_ADDR, 0x03);
- } else {
- dev_info(&pci_dev->dev, "version query failed\n");
- rc = -ENODEV;
- goto out_err;
- }
-
- if ((rc = tpm_register_hardware(pci_dev, &tpm_atmel)) < 0)
- goto out_err;
-
- dev_info(&pci_dev->dev,
- "Atmel TPM version %d.%d.%d.%d\n", version[0], version[1],
- version[2], version[3]);
-
- return 0;
-out_err:
- pci_disable_device(pci_dev);
- return rc;
}
-static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
- {PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6LPC)},
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
-
-static struct pci_driver atmel_pci_driver = {
+static struct device_driver atml_drv = {
.name = "tpm_atmel",
- .id_table = tpm_pci_tbl,
- .probe = tpm_atml_init,
- .remove = __devexit_p(tpm_remove),
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
.suspend = tpm_pm_suspend,
.resume = tpm_pm_resume,
};
static int __init init_atmel(void)
{
- return pci_register_driver(&atmel_pci_driver);
+ int rc = 0;
+ int lo, hi;
+
+ driver_register(&atml_drv);
+
+ lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
+ hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
+
+ tpm_atmel.base = (hi<<8)|lo;
+
+ /* verify that it is an Atmel part */
+ if (tpm_read_index(TPM_ADDR, 4) != 'A' || tpm_read_index(TPM_ADDR, 5) != 'T'
+ || tpm_read_index(TPM_ADDR, 6) != 'M' || tpm_read_index(TPM_ADDR, 7) != 'L') {
+ return -ENODEV;
+ }
+
+ /* verify chip version number is 1.1 */
+ if ( (tpm_read_index(TPM_ADDR, 0x00) != 0x01) ||
+ (tpm_read_index(TPM_ADDR, 0x01) != 0x01 ))
+ return -ENODEV;
+
+ pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ if ( !pdev )
+ return -ENOMEM;
+
+ pdev->name = "tpm_atmel0";
+ pdev->id = -1;
+ pdev->num_resources = 0;
+ pdev->dev.release = tpm_atml_remove;
+ pdev->dev.driver = &atml_drv;
+
+ if ((rc = platform_device_register(pdev)) < 0) {
+ kfree(pdev);
+ pdev = NULL;
+ return rc;
+ }
+
+ if (request_region(tpm_atmel.base, 2, "tpm_atmel0") == NULL ) {
+ platform_device_unregister(pdev);
+ kfree(pdev);
+ pdev = NULL;
+ return -EBUSY;
+ }
+
+ if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0) {
+ release_region(tpm_atmel.base, 2);
+ platform_device_unregister(pdev);
+ kfree(pdev);
+ pdev = NULL;
+ return rc;
+ }
+
+ dev_info(&pdev->dev, "Atmel TPM 1.1, Base Address: 0x%x\n",
+ tpm_atmel.base);
+ return 0;
}
static void __exit cleanup_atmel(void)
{
- pci_unregister_driver(&atmel_pci_driver);
+ if (pdev) {
+ tpm_atml_remove(&pdev->dev);
+ platform_device_unregister(pdev);
+ kfree(pdev);
+ pdev = NULL;
+ }
+
+ driver_unregister(&atml_drv);
}
module_init(init_atmel);
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 939e51e..8198dbb 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -5,6 +5,7 @@
* Specifications at www.trustedcomputinggroup.org
*
* Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de>
+ * Sirrix AG - security technologies, http://www.sirrix.com and
* Applied Data Security Group, Ruhr-University Bochum, Germany
* Project-Homepage: http://www.prosec.rub.de/tpm
*
@@ -29,9 +30,10 @@
#define TPM_INFINEON_DEV_VEN_VALUE 0x15D1
/* These values will be filled after PnP-call */
-static int TPM_INF_DATA = 0;
-static int TPM_INF_ADDR = 0;
-static int pnp_registered = 0;
+static int TPM_INF_DATA;
+static int TPM_INF_ADDR;
+static int TPM_INF_BASE;
+static int TPM_INF_PORT_LEN;
/* TPM header definitions */
enum infineon_tpm_header {
@@ -143,11 +145,9 @@
}
if (i == TPM_MAX_TRIES) { /* timeout occurs */
if (wait_for_bit == STAT_XFE)
- dev_err(&chip->pci_dev->dev,
- "Timeout in wait(STAT_XFE)\n");
+ dev_err(chip->dev, "Timeout in wait(STAT_XFE)\n");
if (wait_for_bit == STAT_RDA)
- dev_err(&chip->pci_dev->dev,
- "Timeout in wait(STAT_RDA)\n");
+ dev_err(chip->dev, "Timeout in wait(STAT_RDA)\n");
return -EIO;
}
return 0;
@@ -170,7 +170,7 @@
static void tpm_wtx(struct tpm_chip *chip)
{
number_of_wtx++;
- dev_info(&chip->pci_dev->dev, "Granting WTX (%02d / %02d)\n",
+ dev_info(chip->dev, "Granting WTX (%02d / %02d)\n",
number_of_wtx, TPM_MAX_WTX_PACKAGES);
wait_and_send(chip, TPM_VL_VER);
wait_and_send(chip, TPM_CTRL_WTX);
@@ -181,7 +181,7 @@
static void tpm_wtx_abort(struct tpm_chip *chip)
{
- dev_info(&chip->pci_dev->dev, "Aborting WTX\n");
+ dev_info(chip->dev, "Aborting WTX\n");
wait_and_send(chip, TPM_VL_VER);
wait_and_send(chip, TPM_CTRL_WTX_ABORT);
wait_and_send(chip, 0x00);
@@ -206,7 +206,7 @@
}
if (buf[0] != TPM_VL_VER) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"Wrong transport protocol implementation!\n");
return -EIO;
}
@@ -221,8 +221,7 @@
}
if ((size == 0x6D00) && (buf[1] == 0x80)) {
- dev_err(&chip->pci_dev->dev,
- "Error handling on vendor layer!\n");
+ dev_err(chip->dev, "Error handling on vendor layer!\n");
return -EIO;
}
@@ -234,7 +233,7 @@
}
if (buf[1] == TPM_CTRL_WTX) {
- dev_info(&chip->pci_dev->dev, "WTX-package received\n");
+ dev_info(chip->dev, "WTX-package received\n");
if (number_of_wtx < TPM_MAX_WTX_PACKAGES) {
tpm_wtx(chip);
goto recv_begin;
@@ -245,14 +244,14 @@
}
if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) {
- dev_info(&chip->pci_dev->dev, "WTX-abort acknowledged\n");
+ dev_info(chip->dev, "WTX-abort acknowledged\n");
return size;
}
if (buf[1] == TPM_CTRL_ERROR) {
- dev_err(&chip->pci_dev->dev, "ERROR-package received:\n");
+ dev_err(chip->dev, "ERROR-package received:\n");
if (buf[4] == TPM_INF_NAK)
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"-> Negative acknowledgement"
" - retransmit command!\n");
return -EIO;
@@ -271,7 +270,7 @@
ret = empty_fifo(chip, 1);
if (ret) {
- dev_err(&chip->pci_dev->dev, "Timeout while clearing FIFO\n");
+ dev_err(chip->dev, "Timeout while clearing FIFO\n");
return -EIO;
}
@@ -316,6 +315,11 @@
*/
}
+static u8 tpm_inf_status(struct tpm_chip *chip)
+{
+ return inb(chip->vendor->base + STAT);
+}
+
static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
@@ -344,6 +348,7 @@
.recv = tpm_inf_recv,
.send = tpm_inf_send,
.cancel = tpm_inf_cancel,
+ .status = tpm_inf_status,
.req_complete_mask = 0,
.req_complete_val = 0,
.attr_group = &inf_attr_grp,
@@ -356,30 +361,11 @@
{"IFX0102", 0},
{"", 0}
};
+
MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
- const struct pnp_device_id *dev_id)
-{
- if (pnp_port_valid(dev, 0)) {
- TPM_INF_ADDR = (pnp_port_start(dev, 0) & 0xff);
- TPM_INF_DATA = ((TPM_INF_ADDR + 1) & 0xff);
- tpm_inf.base = pnp_port_start(dev, 1);
- dev_info(&dev->dev, "Found %s with ID %s\n",
- dev->name, dev_id->id);
- return 0;
- }
- return -ENODEV;
-}
-
-static struct pnp_driver tpm_inf_pnp = {
- .name = "tpm_inf_pnp",
- .id_table = tpm_pnp_tbl,
- .probe = tpm_inf_pnp_probe,
-};
-
-static int __devinit tpm_inf_probe(struct pci_dev *pci_dev,
- const struct pci_device_id *pci_id)
+ const struct pnp_device_id *dev_id)
{
int rc = 0;
u8 iol, ioh;
@@ -388,30 +374,28 @@
int productid[2];
char chipname[20];
- rc = pci_enable_device(pci_dev);
- if (rc)
- return rc;
-
- dev_info(&pci_dev->dev, "LPC-bus found at 0x%x\n", pci_id->device);
-
- /* read IO-ports from PnP */
- rc = pnp_register_driver(&tpm_inf_pnp);
- if (rc < 0) {
- dev_err(&pci_dev->dev,
- "Error %x from pnp_register_driver!\n",rc);
- goto error2;
- }
- if (!rc) {
- dev_info(&pci_dev->dev, "No Infineon TPM found!\n");
- goto error;
+ /* read IO-ports through PnP */
+ if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
+ !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
+ TPM_INF_ADDR = pnp_port_start(dev, 0);
+ TPM_INF_DATA = (TPM_INF_ADDR + 1);
+ TPM_INF_BASE = pnp_port_start(dev, 1);
+ TPM_INF_PORT_LEN = pnp_port_len(dev, 1);
+ if (!TPM_INF_PORT_LEN)
+ return -EINVAL;
+ dev_info(&dev->dev, "Found %s with ID %s\n",
+ dev->name, dev_id->id);
+ if (!((TPM_INF_BASE >> 8) & 0xff))
+ return -EINVAL;
+ /* publish my base address and request region */
+ tpm_inf.base = TPM_INF_BASE;
+ if (request_region
+ (tpm_inf.base, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
+ release_region(tpm_inf.base, TPM_INF_PORT_LEN);
+ return -EINVAL;
+ }
} else {
- pnp_registered = 1;
- }
-
- /* Make sure, we have received valid config ports */
- if (!TPM_INF_ADDR) {
- dev_err(&pci_dev->dev, "No valid IO-ports received!\n");
- goto error;
+ return -EINVAL;
}
/* query chip for its vendor, its version number a.s.o. */
@@ -443,10 +427,6 @@
if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
- if (tpm_inf.base == 0) {
- dev_err(&pci_dev->dev, "No IO-ports found!\n");
- goto error;
- }
/* configure TPM with IO-ports */
outb(IOLIMH, TPM_INF_ADDR);
outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA);
@@ -460,10 +440,11 @@
iol = inb(TPM_INF_DATA);
if ((ioh << 8 | iol) != tpm_inf.base) {
- dev_err(&pci_dev->dev,
+ dev_err(&dev->dev,
"Could not set IO-ports to %04x\n",
tpm_inf.base);
- goto error;
+ release_region(tpm_inf.base, TPM_INF_PORT_LEN);
+ return -EIO;
}
/* activate register */
@@ -475,7 +456,7 @@
outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD);
/* Finally, we're done, print some infos */
- dev_info(&pci_dev->dev, "TPM found: "
+ dev_info(&dev->dev, "TPM found: "
"config base 0x%x, "
"io base 0x%x, "
"chip version %02x%02x, "
@@ -483,59 +464,53 @@
"product id %02x%02x"
"%s\n",
TPM_INF_ADDR,
- tpm_inf.base,
+ TPM_INF_BASE,
version[0], version[1],
vendorid[0], vendorid[1],
productid[0], productid[1], chipname);
- rc = tpm_register_hardware(pci_dev, &tpm_inf);
- if (rc < 0)
- goto error;
+ rc = tpm_register_hardware(&dev->dev, &tpm_inf);
+ if (rc < 0) {
+ release_region(tpm_inf.base, TPM_INF_PORT_LEN);
+ return -ENODEV;
+ }
return 0;
} else {
- dev_info(&pci_dev->dev, "No Infineon TPM found!\n");
-error:
- pnp_unregister_driver(&tpm_inf_pnp);
-error2:
- pci_disable_device(pci_dev);
- pnp_registered = 0;
+ dev_info(&dev->dev, "No Infineon TPM found!\n");
return -ENODEV;
}
}
-static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2)},
- {0,}
-};
+static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
+{
+ struct tpm_chip *chip = pnp_get_drvdata(dev);
-MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
+ if (chip) {
+ release_region(chip->vendor->base, TPM_INF_PORT_LEN);
+ tpm_remove_hardware(chip->dev);
+ }
+}
-static struct pci_driver inf_pci_driver = {
- .name = "tpm_inf",
- .id_table = tpm_pci_tbl,
- .probe = tpm_inf_probe,
- .remove = __devexit_p(tpm_remove),
- .suspend = tpm_pm_suspend,
- .resume = tpm_pm_resume,
+static struct pnp_driver tpm_inf_pnp = {
+ .name = "tpm_inf_pnp",
+ .driver = {
+ .owner = THIS_MODULE,
+ .suspend = tpm_pm_suspend,
+ .resume = tpm_pm_resume,
+ },
+ .id_table = tpm_pnp_tbl,
+ .probe = tpm_inf_pnp_probe,
+ .remove = tpm_inf_pnp_remove,
};
static int __init init_inf(void)
{
- return pci_register_driver(&inf_pci_driver);
+ return pnp_register_driver(&tpm_inf_pnp);
}
static void __exit cleanup_inf(void)
{
- if (pnp_registered)
- pnp_unregister_driver(&tpm_inf_pnp);
- pci_unregister_driver(&inf_pci_driver);
+ pnp_unregister_driver(&tpm_inf_pnp);
}
module_init(init_inf);
@@ -543,5 +518,5 @@
MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>");
MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
-MODULE_VERSION("1.5");
+MODULE_VERSION("1.6");
MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index b412734..253871b 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -111,7 +111,7 @@
}
while (time_before(jiffies, stop));
- dev_info(&chip->pci_dev->dev, "wait for ready failed\n");
+ dev_info(chip->dev, "wait for ready failed\n");
return -EBUSY;
}
@@ -127,12 +127,12 @@
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) {
- dev_err(&chip->pci_dev->dev, "F0 timeout\n");
+ dev_err(chip->dev, "F0 timeout\n");
return -EIO;
}
if ((data =
inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
- dev_err(&chip->pci_dev->dev, "not in normal mode (0x%x)\n",
+ dev_err(chip->dev, "not in normal mode (0x%x)\n",
data);
return -EIO;
}
@@ -141,7 +141,7 @@
for (p = buffer; p < &buffer[count]; p++) {
if (wait_for_stat
(chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"OBF timeout (while reading data)\n");
return -EIO;
}
@@ -152,11 +152,11 @@
if ((data & NSC_STATUS_F0) == 0 &&
(wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) {
- dev_err(&chip->pci_dev->dev, "F0 not set\n");
+ dev_err(chip->dev, "F0 not set\n");
return -EIO;
}
if ((data = inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_EOC) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"expected end of command(0x%x)\n", data);
return -EIO;
}
@@ -187,19 +187,19 @@
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
- dev_err(&chip->pci_dev->dev, "IBF timeout\n");
+ dev_err(chip->dev, "IBF timeout\n");
return -EIO;
}
outb(NSC_COMMAND_NORMAL, chip->vendor->base + NSC_COMMAND);
if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
- dev_err(&chip->pci_dev->dev, "IBR timeout\n");
+ dev_err(chip->dev, "IBR timeout\n");
return -EIO;
}
for (i = 0; i < count; i++) {
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"IBF timeout (while writing data)\n");
return -EIO;
}
@@ -207,7 +207,7 @@
}
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
- dev_err(&chip->pci_dev->dev, "IBF timeout\n");
+ dev_err(chip->dev, "IBF timeout\n");
return -EIO;
}
outb(NSC_COMMAND_EOC, chip->vendor->base + NSC_COMMAND);
@@ -220,6 +220,11 @@
outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
}
+static u8 tpm_nsc_status(struct tpm_chip *chip)
+{
+ return inb(chip->vendor->base + NSC_STATUS);
+}
+
static struct file_operations nsc_ops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -239,7 +244,7 @@
&dev_attr_pcrs.attr,
&dev_attr_caps.attr,
&dev_attr_cancel.attr,
- 0,
+ NULL,
};
static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs };
@@ -248,6 +253,7 @@
.recv = tpm_nsc_recv,
.send = tpm_nsc_send,
.cancel = tpm_nsc_cancel,
+ .status = tpm_nsc_status,
.req_complete_mask = NSC_STATUS_OBF,
.req_complete_val = NSC_STATUS_OBF,
.req_canceled = NSC_STATUS_RDY,
@@ -255,16 +261,32 @@
.miscdev = { .fops = &nsc_ops, },
};
-static int __devinit tpm_nsc_init(struct pci_dev *pci_dev,
- const struct pci_device_id *pci_id)
+static struct platform_device *pdev = NULL;
+
+static void __devexit tpm_nsc_remove(struct device *dev)
+{
+ struct tpm_chip *chip = dev_get_drvdata(dev);
+ if ( chip ) {
+ release_region(chip->vendor->base, 2);
+ tpm_remove_hardware(chip->dev);
+ }
+}
+
+static struct device_driver nsc_drv = {
+ .name = "tpm_nsc",
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
+ .suspend = tpm_pm_suspend,
+ .resume = tpm_pm_resume,
+};
+
+static int __init init_nsc(void)
{
int rc = 0;
int lo, hi;
int nscAddrBase = TPM_ADDR;
-
- if (pci_enable_device(pci_dev))
- return -EIO;
+ driver_register(&nsc_drv);
/* select PM channel 1 */
tpm_write_index(nscAddrBase,NSC_LDN_INDEX, 0x12);
@@ -273,37 +295,71 @@
if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)|
(tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE);
- if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6) {
- rc = -ENODEV;
- goto out_err;
- }
+ if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6)
+ return -ENODEV;
}
hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
tpm_nsc.base = (hi<<8) | lo;
- dev_dbg(&pci_dev->dev, "NSC TPM detected\n");
- dev_dbg(&pci_dev->dev,
+ /* enable the DPM module */
+ tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
+
+ pdev = kmalloc(sizeof(struct platform_device), GFP_KERNEL);
+ if ( !pdev )
+ return -ENOMEM;
+
+ memset(pdev, 0, sizeof(struct platform_device));
+
+ pdev->name = "tpm_nscl0";
+ pdev->id = -1;
+ pdev->num_resources = 0;
+ pdev->dev.release = tpm_nsc_remove;
+ pdev->dev.driver = &nsc_drv;
+
+ if ((rc=platform_device_register(pdev)) < 0) {
+ kfree(pdev);
+ pdev = NULL;
+ return rc;
+ }
+
+ if (request_region(tpm_nsc.base, 2, "tpm_nsc0") == NULL ) {
+ platform_device_unregister(pdev);
+ kfree(pdev);
+ pdev = NULL;
+ return -EBUSY;
+ }
+
+ if ((rc = tpm_register_hardware(&pdev->dev, &tpm_nsc)) < 0) {
+ release_region(tpm_nsc.base, 2);
+ platform_device_unregister(pdev);
+ kfree(pdev);
+ pdev = NULL;
+ return rc;
+ }
+
+ dev_dbg(&pdev->dev, "NSC TPM detected\n");
+ dev_dbg(&pdev->dev,
"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20),
tpm_read_index(nscAddrBase,0x27));
- dev_dbg(&pci_dev->dev,
+ dev_dbg(&pdev->dev,
"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25),
tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28));
- dev_dbg(&pci_dev->dev, "NSC IO Base0 0x%x\n",
+ dev_dbg(&pdev->dev, "NSC IO Base0 0x%x\n",
(tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61));
- dev_dbg(&pci_dev->dev, "NSC IO Base1 0x%x\n",
+ dev_dbg(&pdev->dev, "NSC IO Base1 0x%x\n",
(tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63));
- dev_dbg(&pci_dev->dev, "NSC Interrupt number and wakeup 0x%x\n",
+ dev_dbg(&pdev->dev, "NSC Interrupt number and wakeup 0x%x\n",
tpm_read_index(nscAddrBase,0x70));
- dev_dbg(&pci_dev->dev, "NSC IRQ type select 0x%x\n",
+ dev_dbg(&pdev->dev, "NSC IRQ type select 0x%x\n",
tpm_read_index(nscAddrBase,0x71));
- dev_dbg(&pci_dev->dev,
+ dev_dbg(&pdev->dev,
"NSC DMA channel select0 0x%x, select1 0x%x\n",
tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75));
- dev_dbg(&pci_dev->dev,
+ dev_dbg(&pdev->dev,
"NSC Config "
"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1),
@@ -312,55 +368,23 @@
tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7),
tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9));
- dev_info(&pci_dev->dev,
+ dev_info(&pdev->dev,
"NSC TPM revision %d\n",
tpm_read_index(nscAddrBase, 0x27) & 0x1F);
- /* enable the DPM module */
- tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
-
- if ((rc = tpm_register_hardware(pci_dev, &tpm_nsc)) < 0)
- goto out_err;
-
return 0;
-
-out_err:
- pci_disable_device(pci_dev);
- return rc;
-}
-
-static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
-
-static struct pci_driver nsc_pci_driver = {
- .name = "tpm_nsc",
- .id_table = tpm_pci_tbl,
- .probe = tpm_nsc_init,
- .remove = __devexit_p(tpm_remove),
- .suspend = tpm_pm_suspend,
- .resume = tpm_pm_resume,
-};
-
-static int __init init_nsc(void)
-{
- return pci_register_driver(&nsc_pci_driver);
}
static void __exit cleanup_nsc(void)
{
- pci_unregister_driver(&nsc_pci_driver);
+ if (pdev) {
+ tpm_nsc_remove(&pdev->dev);
+ platform_device_unregister(pdev);
+ kfree(pdev);
+ pdev = NULL;
+ }
+
+ driver_unregister(&nsc_drv);
}
module_init(init_nsc);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e5953f3..c586bfa 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -809,7 +809,7 @@
check_tty_count(tty, "do_tty_hangup");
file_list_lock();
/* This breaks for file handles being sent over AF_UNIX sockets ? */
- list_for_each_entry(filp, &tty->tty_files, f_list) {
+ list_for_each_entry(filp, &tty->tty_files, f_u.fu_list) {
if (filp->f_op->write == redirected_tty_write)
cons_filp = filp;
if (filp->f_op->write != tty_write)
@@ -2728,7 +2728,7 @@
pty_line_name(driver, index, name);
else
tty_line_name(driver, index, name);
- class_device_create(tty_class, dev, device, name);
+ class_device_create(tty_class, NULL, dev, device, "%s", name);
}
/**
@@ -2983,14 +2983,14 @@
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
panic("Couldn't register /dev/tty driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 0), S_IFCHR|S_IRUGO|S_IWUGO, "tty");
- class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
+ class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
cdev_init(&console_cdev, &console_fops);
if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
panic("Couldn't register /dev/console driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 1), S_IFCHR|S_IRUSR|S_IWUSR, "console");
- class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 1), NULL, "console");
+ class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL, "console");
#ifdef CONFIG_UNIX98_PTYS
cdev_init(&ptmx_cdev, &ptmx_fops);
@@ -2998,7 +2998,7 @@
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
panic("Couldn't register /dev/ptmx driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 2), S_IFCHR|S_IRUGO|S_IWUGO, "ptmx");
- class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
+ class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
#endif
#ifdef CONFIG_VT
@@ -3007,7 +3007,7 @@
register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
panic("Couldn't register /dev/tty0 driver\n");
devfs_mk_cdev(MKDEV(TTY_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vc/0");
- class_device_create(tty_class, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+ class_device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
vty_init();
#endif
diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c
index 79c2928..f66c7ad 100644
--- a/drivers/char/vc_screen.c
+++ b/drivers/char/vc_screen.c
@@ -484,8 +484,10 @@
devfs_mk_cdev(MKDEV(VCS_MAJOR, tty->index + 129),
S_IFCHR|S_IRUSR|S_IWUSR,
"vcc/a%u", tty->index + 1);
- class_device_create(vc_class, MKDEV(VCS_MAJOR, tty->index + 1), NULL, "vcs%u", tty->index + 1);
- class_device_create(vc_class, MKDEV(VCS_MAJOR, tty->index + 129), NULL, "vcsa%u", tty->index + 1);
+ class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1),
+ NULL, "vcs%u", tty->index + 1);
+ class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129),
+ NULL, "vcsa%u", tty->index + 1);
}
void vcs_remove_devfs(struct tty_struct *tty)
{
@@ -503,7 +505,7 @@
devfs_mk_cdev(MKDEV(VCS_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/0");
devfs_mk_cdev(MKDEV(VCS_MAJOR, 128), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/a0");
- class_device_create(vc_class, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
- class_device_create(vc_class, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
+ class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
+ class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
return 0;
}
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index d92a056..51abd3d 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -956,9 +956,9 @@
state[i].cur_part = 0;
for (j = 0; j < MAX_PARTITIONS; ++j)
state[i].part_stat_rwi[j] = VIOT_IDLE;
- class_device_create(tape_class, MKDEV(VIOTAPE_MAJOR, i), NULL,
+ class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), NULL,
"iseries!vt%d", i);
- class_device_create(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80),
+ class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80),
NULL, "iseries!nvt%d", i);
devfs_mk_cdev(MKDEV(VIOTAPE_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR,
"iseries/vt%d", i);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 1d44f69..003dda1 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -192,6 +192,9 @@
int i, j, k;
int ret;
+ if (!capable(CAP_SYS_TTY_CONFIG))
+ return -EPERM;
+
kbs = kmalloc(sizeof(*kbs), GFP_KERNEL);
if (!kbs) {
ret = -ENOMEM;
diff --git a/drivers/char/watchdog/cpu5wdt.c b/drivers/char/watchdog/cpu5wdt.c
index 2865dac..e75045f 100644
--- a/drivers/char/watchdog/cpu5wdt.c
+++ b/drivers/char/watchdog/cpu5wdt.c
@@ -28,6 +28,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/timer.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include <asm/uaccess.h>
diff --git a/drivers/char/watchdog/mixcomwd.c b/drivers/char/watchdog/mixcomwd.c
index 7fc2188..d8dede5 100644
--- a/drivers/char/watchdog/mixcomwd.c
+++ b/drivers/char/watchdog/mixcomwd.c
@@ -45,6 +45,8 @@
#include <linux/fs.h>
#include <linux/reboot.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
#include <asm/uaccess.h>
#include <asm/io.h>
diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c
index 427ad51..37c9e13 100644
--- a/drivers/char/watchdog/pcwd.c
+++ b/drivers/char/watchdog/pcwd.c
@@ -66,7 +66,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/reboot.h>
-
+#include <linux/sched.h> /* TASK_INTERRUPTIBLE, set_current_state() and friends */
#include <asm/uaccess.h>
#include <asm/io.h>
diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c
index 0b8e493..5308e5c 100644
--- a/drivers/char/watchdog/pcwd_pci.c
+++ b/drivers/char/watchdog/pcwd_pci.c
@@ -753,6 +753,7 @@
MODULE_DEVICE_TABLE(pci, pcipcwd_pci_tbl);
static struct pci_driver pcipcwd_driver = {
+ .owner = THIS_MODULE,
.name = WATCHDOG_NAME,
.id_table = pcipcwd_pci_tbl,
.probe = pcipcwd_card_init,
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 3625b26..b732020 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -464,32 +464,28 @@
static unsigned long wtcon_save;
static unsigned long wtdat_save;
-static int s3c2410wdt_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s3c2410wdt_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- /* Save watchdog state, and turn it off. */
- wtcon_save = readl(wdt_base + S3C2410_WTCON);
- wtdat_save = readl(wdt_base + S3C2410_WTDAT);
+ /* Save watchdog state, and turn it off. */
+ wtcon_save = readl(wdt_base + S3C2410_WTCON);
+ wtdat_save = readl(wdt_base + S3C2410_WTDAT);
- /* Note that WTCNT doesn't need to be saved. */
- s3c2410wdt_stop();
- }
+ /* Note that WTCNT doesn't need to be saved. */
+ s3c2410wdt_stop();
return 0;
}
-static int s3c2410wdt_resume(struct device *dev, u32 level)
+static int s3c2410wdt_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- /* Restore watchdog state. */
+ /* Restore watchdog state. */
- writel(wtdat_save, wdt_base + S3C2410_WTDAT);
- writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
- writel(wtcon_save, wdt_base + S3C2410_WTCON);
+ writel(wtdat_save, wdt_base + S3C2410_WTDAT);
+ writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
+ writel(wtcon_save, wdt_base + S3C2410_WTCON);
- printk(KERN_INFO PFX "watchdog %sabled\n",
- (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
- }
+ printk(KERN_INFO PFX "watchdog %sabled\n",
+ (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
return 0;
}
diff --git a/drivers/char/watchdog/sc520_wdt.c b/drivers/char/watchdog/sc520_wdt.c
index 72501be..4ee9974 100644
--- a/drivers/char/watchdog/sc520_wdt.c
+++ b/drivers/char/watchdog/sc520_wdt.c
@@ -63,6 +63,7 @@
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include <asm/uaccess.h>
diff --git a/drivers/char/watchdog/softdog.c b/drivers/char/watchdog/softdog.c
index 20e5eb8..a91edaf 100644
--- a/drivers/char/watchdog/softdog.c
+++ b/drivers/char/watchdog/softdog.c
@@ -47,6 +47,8 @@
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
+
#include <asm/uaccess.h>
#define PFX "SoftDog: "
diff --git a/drivers/char/watchdog/wdt_pci.c b/drivers/char/watchdog/wdt_pci.c
index 4b33119..dc9370f 100644
--- a/drivers/char/watchdog/wdt_pci.c
+++ b/drivers/char/watchdog/wdt_pci.c
@@ -711,6 +711,7 @@
static struct pci_driver wdtpci_driver = {
+ .owner = THIS_MODULE,
.name = "wdt_pci",
.id_table = wdtpci_pci_tbl,
.probe = wdtpci_init_one,
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 109d62c..6c6121b 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -4,6 +4,9 @@
* Copyright (C) 2001 Russell King
* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
*
+ * Oct 2005 - Ashok Raj <ashok.raj@intel.com>
+ * Added handling for CPU hotplug
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -36,13 +39,6 @@
static DEFINE_SPINLOCK(cpufreq_driver_lock);
-/* we keep a copy of all ->add'ed CPU's struct sys_device here;
- * as it is only accessed in ->add and ->remove, no lock or reference
- * count is necessary.
- */
-static struct sys_device *cpu_sys_devices[NR_CPUS];
-
-
/* internal prototypes */
static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event);
static void handle_update(void *data);
@@ -574,6 +570,9 @@
unsigned long flags;
unsigned int j;
+ if (cpu_is_offline(cpu))
+ return 0;
+
cpufreq_debug_disable_ratelimit();
dprintk("adding CPU %u\n", cpu);
@@ -582,7 +581,6 @@
* CPU because it is in the same boat. */
policy = cpufreq_cpu_get(cpu);
if (unlikely(policy)) {
- cpu_sys_devices[cpu] = sys_dev;
dprintk("CPU already managed, adding link\n");
sysfs_create_link(&sys_dev->kobj, &policy->kobj, "cpufreq");
cpufreq_debug_enable_ratelimit();
@@ -657,7 +655,6 @@
}
module_put(cpufreq_driver->owner);
- cpu_sys_devices[cpu] = sys_dev;
dprintk("initialization complete\n");
cpufreq_debug_enable_ratelimit();
@@ -682,7 +679,7 @@
nomem_out:
module_put(cpufreq_driver->owner);
- module_out:
+module_out:
cpufreq_debug_enable_ratelimit();
return ret;
}
@@ -698,6 +695,7 @@
unsigned int cpu = sys_dev->id;
unsigned long flags;
struct cpufreq_policy *data;
+ struct sys_device *cpu_sys_dev;
#ifdef CONFIG_SMP
unsigned int j;
#endif
@@ -710,7 +708,6 @@
if (!data) {
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- cpu_sys_devices[cpu] = NULL;
cpufreq_debug_enable_ratelimit();
return -EINVAL;
}
@@ -725,14 +722,12 @@
dprintk("removing link\n");
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
sysfs_remove_link(&sys_dev->kobj, "cpufreq");
- cpu_sys_devices[cpu] = NULL;
cpufreq_cpu_put(data);
cpufreq_debug_enable_ratelimit();
return 0;
}
#endif
- cpu_sys_devices[cpu] = NULL;
if (!kobject_get(&data->kobj)) {
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
@@ -761,7 +756,8 @@
if (j == cpu)
continue;
dprintk("removing link for cpu %u\n", j);
- sysfs_remove_link(&cpu_sys_devices[j]->kobj, "cpufreq");
+ cpu_sys_dev = get_cpu_sysdev(j);
+ sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq");
cpufreq_cpu_put(data);
}
}
@@ -772,7 +768,6 @@
down(&data->lock);
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- cpufreq_driver->target = NULL;
up(&data->lock);
kobject_unregister(&data->kobj);
@@ -1119,17 +1114,30 @@
unsigned int relation)
{
int retval = -EINVAL;
- lock_cpu_hotplug();
+
+ /*
+ * Converted the lock_cpu_hotplug to preempt_disable()
+ * and preempt_enable(). This is a bit kludgy and relies on how cpu
+ * hotplug works. All we need is a guarantee that cpu hotplug won't make
+ * progress on any cpu. Once we do preempt_disable(), this would ensure
+ * that hotplug threads don't get onto this cpu, thereby delaying
+ * the cpu remove process.
+ *
+ * We removed the lock_cpu_hotplug since we need to call this function
+ * via cpu hotplug callbacks, which result in locking the cpu hotplug
+ * thread itself. Agree this is not very clean, cpufreq community
+ * could improve this if required. - Ashok Raj <ashok.raj@intel.com>
+ */
+ preempt_disable();
dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
target_freq, relation);
if (cpu_online(policy->cpu) && cpufreq_driver->target)
retval = cpufreq_driver->target(policy, target_freq, relation);
- unlock_cpu_hotplug();
+ preempt_enable();
return retval;
}
EXPORT_SYMBOL_GPL(__cpufreq_driver_target);
-
int cpufreq_driver_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
@@ -1416,6 +1424,45 @@
}
EXPORT_SYMBOL(cpufreq_update_policy);
+static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct cpufreq_policy *policy;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+
+ if (sys_dev) {
+ switch (action) {
+ case CPU_ONLINE:
+ cpufreq_add_dev(sys_dev);
+ break;
+ case CPU_DOWN_PREPARE:
+ /*
+ * We attempt to put this cpu in lowest frequency
+ * possible before going down. This will permit
+ * hardware-managed P-State to switch other related
+ * threads to min or higher speeds if possible.
+ */
+ policy = cpufreq_cpu_data[cpu];
+ if (policy) {
+ cpufreq_driver_target(policy, policy->min,
+ CPUFREQ_RELATION_H);
+ }
+ break;
+ case CPU_DEAD:
+ cpufreq_remove_dev(sys_dev);
+ break;
+ }
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cpufreq_cpu_notifier =
+{
+ .notifier_call = cpufreq_cpu_callback,
+};
/*********************************************************************
* REGISTER / UNREGISTER CPUFREQ DRIVER *
@@ -1476,6 +1523,7 @@
}
if (!ret) {
+ register_cpu_notifier(&cpufreq_cpu_notifier);
dprintk("driver %s up and running\n", driver_data->name);
cpufreq_debug_enable_ratelimit();
}
@@ -1507,6 +1555,7 @@
dprintk("unregistering driver %s\n", driver->name);
sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
+ unregister_cpu_notifier(&cpufreq_cpu_notifier);
spin_lock_irqsave(&cpufreq_driver_lock, flags);
cpufreq_driver = NULL;
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 741b6b1..3597f25 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -19,6 +19,7 @@
#include <linux/percpu.h>
#include <linux/kobject.h>
#include <linux/spinlock.h>
+#include <linux/notifier.h>
#include <asm/cputime.h>
static spinlock_t cpufreq_stats_lock;
@@ -298,6 +299,27 @@
return 0;
}
+static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+
+ switch (action) {
+ case CPU_ONLINE:
+ cpufreq_update_policy(cpu);
+ break;
+ case CPU_DEAD:
+ cpufreq_stats_free_table(cpu);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cpufreq_stat_cpu_notifier =
+{
+ .notifier_call = cpufreq_stat_cpu_callback,
+};
+
static struct notifier_block notifier_policy_block = {
.notifier_call = cpufreq_stat_notifier_policy
};
@@ -311,6 +333,7 @@
{
int ret;
unsigned int cpu;
+
spin_lock_init(&cpufreq_stats_lock);
if ((ret = cpufreq_register_notifier(¬ifier_policy_block,
CPUFREQ_POLICY_NOTIFIER)))
@@ -323,20 +346,31 @@
return ret;
}
- for_each_cpu(cpu)
- cpufreq_update_policy(cpu);
+ register_cpu_notifier(&cpufreq_stat_cpu_notifier);
+ lock_cpu_hotplug();
+ for_each_online_cpu(cpu) {
+ cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_ONLINE,
+ (void *)(long)cpu);
+ }
+ unlock_cpu_hotplug();
return 0;
}
static void
__exit cpufreq_stats_exit(void)
{
unsigned int cpu;
+
cpufreq_unregister_notifier(¬ifier_policy_block,
CPUFREQ_POLICY_NOTIFIER);
cpufreq_unregister_notifier(¬ifier_trans_block,
CPUFREQ_TRANSITION_NOTIFIER);
- for_each_cpu(cpu)
- cpufreq_stats_free_table(cpu);
+ unregister_cpu_notifier(&cpufreq_stat_cpu_notifier);
+ lock_cpu_hotplug();
+ for_each_online_cpu(cpu) {
+ cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_DEAD,
+ (void *)(long)cpu);
+ }
+ unlock_cpu_hotplug();
}
MODULE_AUTHOR ("Zou Nan hai <nanhai.zou@intel.com>");
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 094835c..4263935 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -2,7 +2,7 @@
config CRYPTO_DEV_PADLOCK
tristate "Support for VIA PadLock ACE"
- depends on CRYPTO && X86 && !X86_64
+ depends on CRYPTO && X86_32
help
Some VIA processors come with an integrated crypto engine
(so called VIA PadLock ACE, Advanced Cryptography Engine)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 327b58e..b6815c6 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -70,8 +70,7 @@
config DCDBAS
tristate "Dell Systems Management Base Driver"
- depends on X86 || X86_64
- default m
+ depends on X86
help
The Dell Systems Management Base Driver provides a sysfs interface
for systems management software to perform System Management
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index e928cdb..8102876 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -121,7 +121,7 @@
static struct adm1021_data *adm1021_update_device(struct device *dev);
/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
-static int read_only = 0;
+static int read_only;
/* This is the driver that will be inserted */
@@ -204,11 +204,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access adm1021_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
err = -ENOMEM;
goto error0;
}
- memset(data, 0, sizeof(struct adm1021_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 526b7ff..3ec1242 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -331,11 +331,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm1025_data));
/* The common I2C client data is placed right before the
ADM1025-specific data. */
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 6251581..e0f5654 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -315,7 +315,7 @@
.detach_client = adm1026_detach_client,
};
-int adm1026_attach_adapter(struct i2c_adapter *adapter)
+static int adm1026_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON)) {
return 0;
@@ -323,7 +323,7 @@
return i2c_probe(adapter, &addr_data, adm1026_detect);
}
-int adm1026_detach_client(struct i2c_client *client)
+static int adm1026_detach_client(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->class_dev);
@@ -332,7 +332,7 @@
return 0;
}
-int adm1026_read_value(struct i2c_client *client, u8 reg)
+static int adm1026_read_value(struct i2c_client *client, u8 reg)
{
int res;
@@ -346,7 +346,7 @@
return res;
}
-int adm1026_write_value(struct i2c_client *client, u8 reg, int value)
+static int adm1026_write_value(struct i2c_client *client, u8 reg, int value)
{
int res;
@@ -360,7 +360,7 @@
return res;
}
-void adm1026_init_client(struct i2c_client *client)
+static void adm1026_init_client(struct i2c_client *client)
{
int value, i;
struct adm1026_data *data = i2c_get_clientdata(client);
@@ -460,7 +460,7 @@
}
}
-void adm1026_print_gpio(struct i2c_client *client)
+static void adm1026_print_gpio(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
int i;
@@ -492,7 +492,7 @@
}
}
-void adm1026_fixup_gpio(struct i2c_client *client)
+static void adm1026_fixup_gpio(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
int i;
@@ -1452,8 +1452,8 @@
static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
-int adm1026_detect(struct i2c_adapter *adapter, int address,
- int kind)
+static int adm1026_detect(struct i2c_adapter *adapter, int address,
+ int kind)
{
int company, verstep;
struct i2c_client *new_client;
@@ -1470,13 +1470,11 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access adm1026_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct adm1026_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm1026_data));
-
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 58338ed..7c545d5 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -740,11 +740,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm1031_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index bc7faef..11dc95f 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -45,6 +45,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
@@ -69,8 +70,7 @@
#define ADM9240_REG_INT(nr) (0x41 + (nr))
#define ADM9240_REG_INT_MASK(nr) (0x43 + (nr))
#define ADM9240_REG_TEMP 0x27
-#define ADM9240_REG_TEMP_HIGH 0x39
-#define ADM9240_REG_TEMP_HYST 0x3a
+#define ADM9240_REG_TEMP_MAX(nr) (0x39 + (nr)) /* 0, 1 = high, hyst */
#define ADM9240_REG_ANALOG_OUT 0x19
#define ADM9240_REG_CHASSIS_CLEAR 0x46
#define ADM9240_REG_VID_FAN_DIV 0x47
@@ -162,177 +162,155 @@
u8 fan_min[2]; /* rw fan1_min */
u8 fan_div[2]; /* rw fan1_div, read-only accessor */
s16 temp; /* ro temp1_input, 9-bit sign-extended */
- s8 temp_high; /* rw temp1_max */
- s8 temp_hyst; /* rw temp1_max_hyst */
+ s8 temp_max[2]; /* rw 0 -> temp_max, 1 -> temp_max_hyst */
u16 alarms; /* ro alarms */
u8 aout; /* rw aout_output */
u8 vid; /* ro vid */
u8 vrm; /* -- vrm set on startup, no accessor */
};
-/* i2c byte read/write interface */
-static int adm9240_read_value(struct i2c_client *client, u8 reg)
-{
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
/*** sysfs accessors ***/
/* temperature */
-#define show_temp(value, scale) \
-static ssize_t show_##value(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- struct adm9240_data *data = adm9240_update_device(dev); \
- return sprintf(buf, "%d\n", data->value * scale); \
-}
-show_temp(temp_high, 1000);
-show_temp(temp_hyst, 1000);
-show_temp(temp, 500); /* 0.5'C per bit */
-
-#define set_temp(value, reg) \
-static ssize_t set_##value(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct adm9240_data *data = adm9240_update_device(dev); \
- long temp = simple_strtoul(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->value = TEMP_TO_REG(temp); \
- adm9240_write_value(client, reg, data->value); \
- up(&data->update_lock); \
- return count; \
+static ssize_t show_temp(struct device *dev, struct device_attribute *dummy,
+ char *buf)
+{
+ struct adm9240_data *data = adm9240_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp * 500); /* 9-bit value */
}
-set_temp(temp_high, ADM9240_REG_TEMP_HIGH);
-set_temp(temp_hyst, ADM9240_REG_TEMP_HYST);
+static ssize_t show_max(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adm9240_data *data = adm9240_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_max[attr->index] * 1000);
+}
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
- show_temp_high, set_temp_high);
-static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
- show_temp_hyst, set_temp_hyst);
+static ssize_t set_max(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm9240_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_max[attr->index] = TEMP_TO_REG(val);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index),
+ data->temp_max[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+ show_max, set_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
+ show_max, set_max, 1);
/* voltage */
-static ssize_t show_in(struct device *dev, char *buf, int nr)
+static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
+ char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr));
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index],
+ attr->index));
}
-static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+static ssize_t show_in_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr));
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index],
+ attr->index));
}
-static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+static ssize_t show_in_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr));
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index],
+ attr->index));
}
-static ssize_t set_in_min(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_in_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
- data->in_min[nr] = IN_TO_REG(val, nr);
- adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]);
+ data->in_min[attr->index] = IN_TO_REG(val, attr->index);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index),
+ data->in_min[attr->index]);
up(&data->update_lock);
return count;
}
-static ssize_t set_in_max(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_in_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
- data->in_max[nr] = IN_TO_REG(val, nr);
- adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]);
+ data->in_max[attr->index] = IN_TO_REG(val, attr->index);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index),
+ data->in_max[attr->index]);
up(&data->update_lock);
return count;
}
-#define show_in_offset(offset) \
-static ssize_t show_in##offset(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_in(dev, buf, offset); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); \
-static ssize_t show_in##offset##_min(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_in_min(dev, buf, offset); \
-} \
-static ssize_t show_in##offset##_max(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_in_max(dev, buf, offset); \
-} \
-static ssize_t \
-set_in##offset##_min(struct device *dev, \
- struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- return set_in_min(dev, buf, count, offset); \
-} \
-static ssize_t \
-set_in##offset##_max(struct device *dev, \
- struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- return set_in_max(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in##offset##_min, set_in##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in##offset##_max, set_in##offset##_max);
+#define vin(nr) \
+static SENSOR_DEVICE_ATTR(in##nr##_input, S_IRUGO, \
+ show_in, NULL, nr); \
+static SENSOR_DEVICE_ATTR(in##nr##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, nr); \
+static SENSOR_DEVICE_ATTR(in##nr##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, nr);
-show_in_offset(0);
-show_in_offset(1);
-show_in_offset(2);
-show_in_offset(3);
-show_in_offset(4);
-show_in_offset(5);
+vin(0);
+vin(1);
+vin(2);
+vin(3);
+vin(4);
+vin(5);
/* fans */
-static ssize_t show_fan(struct device *dev, char *buf, int nr)
+static ssize_t show_fan(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
- 1 << data->fan_div[nr]));
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
+ 1 << data->fan_div[attr->index]));
}
-static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+static ssize_t show_fan_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
- 1 << data->fan_div[nr]));
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[attr->index],
+ 1 << data->fan_div[attr->index]));
}
-static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+static ssize_t show_fan_div(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", 1 << data->fan_div[nr]);
+ return sprintf(buf, "%d\n", 1 << data->fan_div[attr->index]);
}
/* write new fan div, callers must hold data->update_lock */
@@ -341,16 +319,16 @@
{
u8 reg, old, shift = (nr + 2) * 2;
- reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
+ reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
old = (reg >> shift) & 3;
reg &= ~(3 << shift);
reg |= (fan_div << shift);
- adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg);
dev_dbg(&client->dev, "fan%d clock divider changed from %u "
"to %u\n", nr + 1, 1 << old, 1 << fan_div);
}
-/*
+/*
* set fan speed low limit:
*
* - value is zero: disable fan speed low limit alarm
@@ -361,12 +339,15 @@
* - otherwise: select fan clock divider to suit fan speed low limit,
* measurement code may adjust registers to ensure fan speed reading
*/
-static ssize_t set_fan_min(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_fan_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
+ int nr = attr->index;
u8 new_div;
down(&data->update_lock);
@@ -406,50 +387,27 @@
data->fan_div[nr] = new_div;
adm9240_write_fan_div(client, nr, new_div);
}
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr),
+ i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr),
data->fan_min[nr]);
up(&data->update_lock);
return count;
}
-#define show_fan_offset(offset) \
-static ssize_t show_fan_##offset (struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
-return show_fan(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_div (struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
-return show_fan_div(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_min (struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
-return show_fan_min(dev, buf, offset - 1); \
-} \
-static ssize_t set_fan_##offset##_min (struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
-return set_fan_min(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
- show_fan_##offset, NULL); \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
- show_fan_##offset##_div, NULL); \
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_##offset##_min, set_fan_##offset##_min);
+#define fan(nr) \
+static SENSOR_DEVICE_ATTR(fan##nr##_input, S_IRUGO, \
+ show_fan, NULL, nr - 1); \
+static SENSOR_DEVICE_ATTR(fan##nr##_div, S_IRUGO, \
+ show_fan_div, NULL, nr - 1); \
+static SENSOR_DEVICE_ATTR(fan##nr##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, nr - 1);
-show_fan_offset(1);
-show_fan_offset(2);
+fan(1);
+fan(2);
/* alarms */
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
return sprintf(buf, "%u\n", data->alarms);
@@ -457,7 +415,8 @@
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
/* vid */
-static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vid(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
@@ -465,13 +424,16 @@
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
/* analog output */
-static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_aout(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout));
}
-static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t set_aout(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
@@ -479,20 +441,23 @@
down(&data->update_lock);
data->aout = AOUT_TO_REG(val);
- adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout);
up(&data->update_lock);
return count;
}
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
/* chassis_clear */
-static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t chassis_clear(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned long val = simple_strtol(buf, NULL, 10);
if (val == 1) {
- adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_CHASSIS_CLEAR, 0x80);
dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
}
return count;
@@ -513,11 +478,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm9240_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -533,7 +497,7 @@
if (kind < 0) {
/* verify chip: reg address should match i2c address */
- if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR)
+ if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
!= address) {
dev_err(&adapter->dev, "detect fail: address match, "
"0x%02x\n", address);
@@ -541,8 +505,8 @@
}
/* check known chip manufacturer */
- man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID);
-
+ man_id = i2c_smbus_read_byte_data(new_client,
+ ADM9240_REG_MAN_ID);
if (man_id == 0x23) {
kind = adm9240;
} else if (man_id == 0xda) {
@@ -556,7 +520,8 @@
}
/* successful detect, print chip info */
- die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV);
+ die_rev = i2c_smbus_read_byte_data(new_client,
+ ADM9240_REG_DIE_REV);
dev_info(&adapter->dev, "found %s revision %u\n",
man_id == 0x23 ? "ADM9240" :
man_id == 0xda ? "DS1780" : "LM81", die_rev);
@@ -588,33 +553,59 @@
goto exit_detach;
}
- device_create_file(&new_client->dev, &dev_attr_in0_input);
- device_create_file(&new_client->dev, &dev_attr_in0_min);
- device_create_file(&new_client->dev, &dev_attr_in0_max);
- device_create_file(&new_client->dev, &dev_attr_in1_input);
- device_create_file(&new_client->dev, &dev_attr_in1_min);
- device_create_file(&new_client->dev, &dev_attr_in1_max);
- device_create_file(&new_client->dev, &dev_attr_in2_input);
- device_create_file(&new_client->dev, &dev_attr_in2_min);
- device_create_file(&new_client->dev, &dev_attr_in2_max);
- device_create_file(&new_client->dev, &dev_attr_in3_input);
- device_create_file(&new_client->dev, &dev_attr_in3_min);
- device_create_file(&new_client->dev, &dev_attr_in3_max);
- device_create_file(&new_client->dev, &dev_attr_in4_input);
- device_create_file(&new_client->dev, &dev_attr_in4_min);
- device_create_file(&new_client->dev, &dev_attr_in4_max);
- device_create_file(&new_client->dev, &dev_attr_in5_input);
- device_create_file(&new_client->dev, &dev_attr_in5_min);
- device_create_file(&new_client->dev, &dev_attr_in5_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in0_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in0_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in0_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in1_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in1_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in1_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in2_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in2_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in2_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in3_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in3_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in3_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in4_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in4_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in4_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in5_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in5_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in5_max.dev_attr);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_fan1_input);
- device_create_file(&new_client->dev, &dev_attr_fan1_div);
- device_create_file(&new_client->dev, &dev_attr_fan1_min);
- device_create_file(&new_client->dev, &dev_attr_fan2_input);
- device_create_file(&new_client->dev, &dev_attr_fan2_div);
- device_create_file(&new_client->dev, &dev_attr_fan2_min);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp1_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_div.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_div.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_min.dev_attr);
device_create_file(&new_client->dev, &dev_attr_alarms);
device_create_file(&new_client->dev, &dev_attr_aout_output);
device_create_file(&new_client->dev, &dev_attr_chassis_clear);
@@ -654,8 +645,8 @@
static void adm9240_init_client(struct i2c_client *client)
{
struct adm9240_data *data = i2c_get_clientdata(client);
- u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG);
- u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3;
+ u8 conf = i2c_smbus_read_byte_data(client, ADM9240_REG_CONFIG);
+ u8 mode = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF) & 3;
data->vrm = vid_which_vrm(); /* need this to report vid as mV */
@@ -672,18 +663,22 @@
for (i = 0; i < 6; i++)
{
- adm9240_write_value(client,
+ i2c_smbus_write_byte_data(client,
ADM9240_REG_IN_MIN(i), 0);
- adm9240_write_value(client,
+ i2c_smbus_write_byte_data(client,
ADM9240_REG_IN_MAX(i), 255);
}
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255);
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255);
- adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127);
- adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_FAN_MIN(0), 255);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_FAN_MIN(1), 255);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_TEMP_MAX(0), 127);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_TEMP_MAX(1), 127);
/* start measurement cycle */
- adm9240_write_value(client, ADM9240_REG_CONFIG, 1);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1);
dev_info(&client->dev, "cold start: config was 0x%02x "
"mode %u\n", conf, mode);
@@ -704,25 +699,25 @@
for (i = 0; i < 6; i++) /* read voltages */
{
- data->in[i] = adm9240_read_value(client,
+ data->in[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN(i));
}
- data->alarms = adm9240_read_value(client,
+ data->alarms = i2c_smbus_read_byte_data(client,
ADM9240_REG_INT(0)) |
- adm9240_read_value(client,
+ i2c_smbus_read_byte_data(client,
ADM9240_REG_INT(1)) << 8;
/* read temperature: assume temperature changes less than
* 0.5'C per two measurement cycles thus ignore possible
* but unlikely aliasing error on lsb reading. --Grant */
- data->temp = ((adm9240_read_value(client,
+ data->temp = ((i2c_smbus_read_byte_data(client,
ADM9240_REG_TEMP) << 8) |
- adm9240_read_value(client,
+ i2c_smbus_read_byte_data(client,
ADM9240_REG_TEMP_CONF)) / 128;
for (i = 0; i < 2; i++) /* read fans */
{
- data->fan[i] = adm9240_read_value(client,
+ data->fan[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_FAN(i));
/* adjust fan clock divider on overflow */
@@ -747,30 +742,30 @@
for (i = 0; i < 6; i++)
{
- data->in_min[i] = adm9240_read_value(client,
+ data->in_min[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN_MIN(i));
- data->in_max[i] = adm9240_read_value(client,
+ data->in_max[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN_MAX(i));
}
for (i = 0; i < 2; i++)
{
- data->fan_min[i] = adm9240_read_value(client,
+ data->fan_min[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_FAN_MIN(i));
}
- data->temp_high = adm9240_read_value(client,
- ADM9240_REG_TEMP_HIGH);
- data->temp_hyst = adm9240_read_value(client,
- ADM9240_REG_TEMP_HYST);
+ data->temp_max[0] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_MAX(0));
+ data->temp_max[1] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_MAX(1));
/* read fan divs and 5-bit VID */
- i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
+ i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
data->fan_div[0] = (i >> 4) & 3;
data->fan_div[1] = (i >> 6) & 3;
data->vid = i & 0x0f;
- data->vid |= (adm9240_read_value(client,
+ data->vid |= (i2c_smbus_read_byte_data(client,
ADM9240_REG_VID4) & 1) << 4;
/* read analog out */
- data->aout = adm9240_read_value(client,
+ data->aout = i2c_smbus_read_byte_data(client,
ADM9240_REG_ANALOG_OUT);
data->last_updated_config = jiffies;
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 8e34855..52c4697 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -629,19 +629,17 @@
int i, id, err;
struct asb100_data *data = i2c_get_clientdata(new_client);
- data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[0])) {
err = -ENOMEM;
goto ERROR_SC_0;
}
- memset(data->lm75[0], 0x00, sizeof(struct i2c_client));
- data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[1])) {
err = -ENOMEM;
goto ERROR_SC_1;
}
- memset(data->lm75[1], 0x00, sizeof(struct i2c_client));
id = i2c_adapter_id(adapter);
@@ -724,12 +722,11 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access asb100_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
- pr_debug("asb100.o: detect failed, kmalloc failed!\n");
+ if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
+ pr_debug("asb100.o: detect failed, kzalloc failed!\n");
err = -ENOMEM;
goto ERROR0;
}
- memset(data, 0, sizeof(struct asb100_data));
new_client = &data->client;
init_MUTEX(&data->lock);
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index deb4d34..53324f5 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -253,6 +253,8 @@
static int atxp1_attach_adapter(struct i2c_adapter *adapter)
{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
return i2c_probe(adapter, &addr_data, &atxp1_detect);
};
@@ -266,12 +268,11 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct atxp1_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct atxp1_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index b0199e0..34f71b7 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -180,12 +180,14 @@
static int ds1621_attach_adapter(struct i2c_adapter *adapter)
{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
return i2c_probe(adapter, &addr_data, ds1621_detect);
}
/* This function is called by i2c_probe */
-int ds1621_detect(struct i2c_adapter *adapter, int address,
- int kind)
+static int ds1621_detect(struct i2c_adapter *adapter, int address,
+ int kind)
{
int conf, temp;
struct i2c_client *new_client;
@@ -200,11 +202,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access ds1621_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct ds1621_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index eef6061..a02e1c3 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -303,11 +303,10 @@
/* OK. For now, we presume we have a valid client. We now create the
* client structure, even though we cannot fill it completely yet.
* But it allows us to access i2c_smbus_read_byte_data. */
- if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct fscher_data));
/* The common I2C client data is placed right before the
* Hermes-specific data. */
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 5fc77a5..64e4edc 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -438,7 +438,7 @@
return i2c_probe(adapter, &addr_data, fscpos_detect);
}
-int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
+static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct fscpos_data *data;
@@ -453,11 +453,10 @@
* But it allows us to access fscpos_{read,write}_value.
*/
- if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct fscpos_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 256b932..2f178db 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -365,11 +365,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access gl518_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct gl518_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 12fd757..c39ba12 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -536,11 +536,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access gl520_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct gl520_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index 7f01076..0015da5 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -296,11 +296,9 @@
return 0;
}
-static int hdaps_resume(struct device *dev, u32 level)
+static int hdaps_resume(struct device *dev)
{
- if (level == RESUME_ENABLE)
- return hdaps_device_init();
- return 0;
+ return hdaps_device_init();
}
static struct device_driver hdaps_driver = {
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 9b41c9b..6f48579 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -45,7 +45,7 @@
return ERR_PTR(-ENOMEM);
id = id & MAX_ID_MASK;
- cdev = class_device_create(hwmon_class, MKDEV(0,0), dev,
+ cdev = class_device_create(hwmon_class, NULL, MKDEV(0,0), dev,
HWMON_ID_FORMAT, id);
if (IS_ERR(cdev))
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 53cc2b6..6c41e25 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -2,7 +2,7 @@
it87.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring.
- Supports: IT8705F Super I/O chip w/LPC interface & SMBus
+ Supports: IT8705F Super I/O chip w/LPC interface
IT8712F Super I/O chip w/LPC interface & SMBus
Sis950 A clone of the IT8705F
@@ -47,7 +47,7 @@
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned short isa_address = 0x290;
+static unsigned short isa_address;
/* Insmod parameters */
I2C_CLIENT_INSMOD_2(it87, it8712);
@@ -706,7 +706,7 @@
}
/* SuperIO detection - will change isa_address if a chip is found */
-static int __init it87_find(int *address)
+static int __init it87_find(unsigned short *address)
{
int err = -ENODEV;
@@ -738,7 +738,7 @@
}
/* This function is called by i2c_probe */
-int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i;
struct i2c_client *new_client;
@@ -757,42 +757,14 @@
if (!request_region(address, IT87_EXTENT, it87_isa_driver.name))
goto ERROR0;
- /* Probe whether there is anything available on this address. Already
- done for SMBus and Super-I/O clients */
- if (kind < 0) {
- if (is_isa && !chip_type) {
-#define REALLY_SLOW_IO
- /* We need the timeouts for at least some IT87-like chips. But only
- if we read 'undefined' registers. */
- i = inb_p(address + 1);
- if (inb_p(address + 2) != i
- || inb_p(address + 3) != i
- || inb_p(address + 7) != i) {
- err = -ENODEV;
- goto ERROR1;
- }
-#undef REALLY_SLOW_IO
-
- /* Let's just hope nothing breaks here */
- i = inb_p(address + 5) & 0x7f;
- outb_p(~i & 0x7f, address + 5);
- if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) {
- outb_p(i, address + 5);
- err = -ENODEV;
- goto ERROR1;
- }
- }
- }
-
- /* OK. For now, we presume we have a valid client. We now create the
+ /* For now, we presume we have a valid client. We create the
client structure, even though we cannot fill it completely yet.
But it allows us to access it87_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- memset(data, 0, sizeof(struct it87_data));
new_client = &data->client;
if (is_isa)
@@ -1182,20 +1154,18 @@
static int __init sm_it87_init(void)
{
- int addr, res;
-
- if (!it87_find(&addr)) {
- isa_address = addr;
- }
+ int res;
res = i2c_add_driver(&it87_driver);
if (res)
return res;
- res = i2c_isa_add_driver(&it87_isa_driver);
- if (res) {
- i2c_del_driver(&it87_driver);
- return res;
+ if (!it87_find(&isa_address)) {
+ res = i2c_isa_add_driver(&it87_isa_driver);
+ if (res) {
+ i2c_del_driver(&it87_driver);
+ return res;
+ }
}
return 0;
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index be5c709..954ec24 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -375,11 +375,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm63_data));
/* The common I2C client data is placed right before the
LM63-specific data. */
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 9a3ebdf..d70f4c8 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -127,11 +127,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access lm75_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm75_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 866eab9..9380fda 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -226,11 +226,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access lm77_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm77_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm77_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index f6730dc..bde0cda 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -480,7 +480,7 @@
}
/* This function is called by i2c_probe */
-int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
+static int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i, err;
struct i2c_client *new_client;
@@ -540,11 +540,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access lm78_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- memset(data, 0, sizeof(struct lm78_data));
new_client = &data->client;
if (is_isa)
@@ -726,7 +725,6 @@
return i2c_smbus_write_byte_data(client, reg, value);
}
-/* Called when we have found a new LM78. It should set limits, etc. */
static void lm78_init_client(struct i2c_client *client)
{
u8 config = lm78_read_value(client, LM78_REG_CONFIG);
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 83af8b3..c359fde 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -393,7 +393,7 @@
return i2c_probe(adapter, &addr_data, lm80_detect);
}
-int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
+static int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i, cur;
struct i2c_client *new_client;
@@ -407,11 +407,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access lm80_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm80_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index d74b2c2..9a70611 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -230,11 +230,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm83_data));
/* The common I2C client data is placed right after the
* LM83-specific data. */
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index ab214df..d1070ed 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1007,14 +1007,14 @@
temp_auto(2);
temp_auto(3);
-int lm85_attach_adapter(struct i2c_adapter *adapter)
+static int lm85_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
return i2c_probe(adapter, &addr_data, lm85_detect);
}
-int lm85_detect(struct i2c_adapter *adapter, int address,
+static int lm85_detect(struct i2c_adapter *adapter, int address,
int kind)
{
int company, verstep ;
@@ -1033,11 +1033,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access lm85_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
- memset(data, 0, sizeof(struct lm85_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -1236,7 +1235,7 @@
return err;
}
-int lm85_detach_client(struct i2c_client *client)
+static int lm85_detach_client(struct i2c_client *client)
{
struct lm85_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->class_dev);
@@ -1246,7 +1245,7 @@
}
-int lm85_read_value(struct i2c_client *client, u8 reg)
+static int lm85_read_value(struct i2c_client *client, u8 reg)
{
int res;
@@ -1276,7 +1275,7 @@
return res ;
}
-int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+static int lm85_write_value(struct i2c_client *client, u8 reg, int value)
{
int res ;
@@ -1305,7 +1304,7 @@
return res ;
}
-void lm85_init_client(struct i2c_client *client)
+static void lm85_init_client(struct i2c_client *client)
{
int value;
struct lm85_data *data = i2c_get_clientdata(client);
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index dca996d..eeec1817 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -554,11 +554,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm87_data));
/* The common I2C client data is placed right before the
LM87-specific data. */
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 14de05f..83cf2e1 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -31,7 +31,7 @@
* Devices. That chip is similar to the LM90, with a few differences
* that are not handled by this driver. Complete datasheet can be
* obtained from Analog's website at:
- * http://products.analog.com/products/info.asp?product=ADM1032
+ * http://www.analog.com/en/prod/0,2877,ADM1032,00.html
* Among others, it has a higher accuracy than the LM90, much like the
* LM86 does.
*
@@ -49,7 +49,7 @@
* register values are decoded differently) it is ignored by this
* driver. Complete datasheet can be obtained from Analog's website
* at:
- * http://products.analog.com/products/info.asp?product=ADT7461
+ * http://www.analog.com/en/prod/0,2877,ADT7461,00.html
*
* Since the LM90 was the first chipset supported by this driver, most
* comments will refer to this chipset, but are actually general and
@@ -83,10 +83,10 @@
* Addresses to scan
* Address is fully defined internally and cannot be changed except for
* MAX6659.
- * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c.
- * LM89-1, and LM99-1 have address 0x4d.
+ * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658
+ * have address 0x4c.
+ * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d.
* MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
- * ADT7461 always has address 0x4c.
*/
static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
@@ -345,10 +345,74 @@
static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+/* pec used for ADM1032 only */
+static ssize_t show_pec(struct device *dev, struct device_attribute *dummy,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return sprintf(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC));
+}
+
+static ssize_t set_pec(struct device *dev, struct device_attribute *dummy,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ long val = simple_strtol(buf, NULL, 10);
+
+ switch (val) {
+ case 0:
+ client->flags &= ~I2C_CLIENT_PEC;
+ break;
+ case 1:
+ client->flags |= I2C_CLIENT_PEC;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec);
+
/*
* Real code
*/
+/* The ADM1032 supports PEC but not on write byte transactions, so we need
+ to explicitely ask for a transaction without PEC. */
+static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
+{
+ return i2c_smbus_xfer(client->adapter, client->addr,
+ client->flags & ~I2C_CLIENT_PEC,
+ I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+}
+
+/* It is assumed that client->update_lock is held (unless we are in
+ detection or initialization steps). This matters when PEC is enabled,
+ because we don't want the address pointer to change between the write
+ byte and the read byte transactions. */
+static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value)
+{
+ int err;
+
+ if (client->flags & I2C_CLIENT_PEC) {
+ err = adm1032_write_byte(client, reg);
+ if (err >= 0)
+ err = i2c_smbus_read_byte(client);
+ } else
+ err = i2c_smbus_read_byte_data(client, reg);
+
+ if (err < 0) {
+ dev_warn(&client->dev, "Register %#02x read failed (%d)\n",
+ reg, err);
+ return err;
+ }
+ *value = err;
+
+ return 0;
+}
+
static int lm90_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON))
@@ -370,11 +434,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm90_data));
/* The common I2C client data is placed right before the
LM90-specific data. */
@@ -403,20 +466,22 @@
if (kind < 0) { /* detection and identification */
u8 man_id, chip_id, reg_config1, reg_convrate;
- man_id = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CHIP_ID);
- reg_config1 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG1);
- reg_convrate = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONVRATE);
+ if (lm90_read_reg(new_client, LM90_REG_R_MAN_ID,
+ &man_id) < 0
+ || lm90_read_reg(new_client, LM90_REG_R_CHIP_ID,
+ &chip_id) < 0
+ || lm90_read_reg(new_client, LM90_REG_R_CONFIG1,
+ ®_config1) < 0
+ || lm90_read_reg(new_client, LM90_REG_R_CONVRATE,
+ ®_convrate) < 0)
+ goto exit_free;
if (man_id == 0x01) { /* National Semiconductor */
u8 reg_config2;
- reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG2);
+ if (lm90_read_reg(new_client, LM90_REG_R_CONFIG2,
+ ®_config2) < 0)
+ goto exit_free;
if ((reg_config1 & 0x2A) == 0x00
&& (reg_config2 & 0xF8) == 0x00
@@ -435,14 +500,12 @@
}
} else
if (man_id == 0x41) { /* Analog Devices */
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x40 /* ADM1032 */
+ if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
&& (reg_config1 & 0x3F) == 0x00
&& reg_convrate <= 0x0A) {
kind = adm1032;
} else
- if (address == 0x4c
- && chip_id == 0x51 /* ADT7461 */
+ if (chip_id == 0x51 /* ADT7461 */
&& (reg_config1 & 0x1F) == 0x00 /* check compat mode */
&& reg_convrate <= 0x0A) {
kind = adt7461;
@@ -477,6 +540,10 @@
name = "lm90";
} else if (kind == adm1032) {
name = "adm1032";
+ /* The ADM1032 supports PEC, but only if combined
+ transactions are not used. */
+ if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ new_client->flags |= I2C_CLIENT_PEC;
} else if (kind == lm99) {
name = "lm99";
} else if (kind == lm86) {
@@ -529,6 +596,9 @@
&sensor_dev_attr_temp2_crit_hyst.dev_attr);
device_create_file(&new_client->dev, &dev_attr_alarms);
+ if (new_client->flags & I2C_CLIENT_PEC)
+ device_create_file(&new_client->dev, &dev_attr_pec);
+
return 0;
exit_detach:
@@ -548,7 +618,10 @@
*/
i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
5); /* 2 Hz */
- config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
+ if (lm90_read_reg(client, LM90_REG_R_CONFIG1, &config) < 0) {
+ dev_warn(&client->dev, "Initialization failed!\n");
+ return;
+ }
if (config & 0x40)
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
config & 0xBF); /* run */
@@ -576,21 +649,15 @@
down(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
- u8 oldh, newh;
+ u8 oldh, newh, l;
dev_dbg(&client->dev, "Updating lm90 data.\n");
- data->temp8[0] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_LOCAL_TEMP);
- data->temp8[1] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_LOCAL_LOW);
- data->temp8[2] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_LOCAL_HIGH);
- data->temp8[3] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_LOCAL_CRIT);
- data->temp8[4] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_CRIT);
- data->temp_hyst = i2c_smbus_read_byte_data(client,
- LM90_REG_R_TCRIT_HYST);
+ lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, &data->temp8[0]);
+ lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[1]);
+ lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[2]);
+ lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[3]);
+ lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[4]);
+ lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
/*
* There is a trick here. We have to read two registers to
@@ -606,36 +673,20 @@
* then we have a valid reading. Else we have to read the low
* byte again, and now we believe we have a correct reading.
*/
- oldh = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPH);
- data->temp11[0] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPL);
- newh = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPH);
- if (newh != oldh) {
- data->temp11[0] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPL);
-#ifdef DEBUG
- oldh = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPH);
- /* oldh is actually newer */
- if (newh != oldh)
- dev_warn(&client->dev, "Remote temperature may be "
- "wrong.\n");
-#endif
- }
- data->temp11[0] |= (newh << 8);
+ if (lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &oldh) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &newh) == 0
+ && (newh == oldh
+ || lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0))
+ data->temp11[0] = (newh << 8) | l;
- data->temp11[1] = (i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_LOWH) << 8) +
- i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_LOWL);
- data->temp11[2] = (i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_HIGHH) << 8) +
- i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_HIGHL);
- data->alarms = i2c_smbus_read_byte_data(client,
- LM90_REG_R_STATUS);
+ if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &newh) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL, &l) == 0)
+ data->temp11[1] = (newh << 8) | l;
+ if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &newh) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, &l) == 0)
+ data->temp11[2] = (newh << 8) | l;
+ lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
data->last_updated = jiffies;
data->valid = 1;
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index 647b7c7..7a4b370 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -300,11 +300,10 @@
| I2C_FUNC_SMBUS_WORD_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm92_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm92_data));
/* Fill in enough client fields so that we can read from the chip,
which is required for identication */
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 16bf71f..6a82ffa 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -197,11 +197,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct max1619_data));
/* The common I2C client data is placed right before the
MAX1619-specific data. */
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index cf2a357..17f745a 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -754,9 +754,8 @@
const char *name = "pc87360";
int use_thermistors = 0;
- if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
+ if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
return -ENOMEM;
- memset(data, 0x00, sizeof(struct pc87360_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 21aa9a4..9c6cade 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -518,11 +518,10 @@
goto exit_release;
}
- if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- memset(data, 0, sizeof(struct sis5595_data));
new_client = &data->client;
new_client->addr = address;
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 7fe7157..2a3e21b 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -244,11 +244,10 @@
return -EBUSY;
}
- if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
err = -ENOMEM;
goto error_release;
}
- memset(data, 0x00, sizeof(struct smsc47b397_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -299,7 +298,7 @@
superio_enter();
id = superio_inb(SUPERIO_REG_DEVID);
- if (id != 0x6f) {
+ if ((id != 0x6f) && (id != 0x81)) {
superio_exit();
return -ENODEV;
}
@@ -310,8 +309,9 @@
*addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
| superio_inb(SUPERIO_REG_BASE_LSB);
- printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC "
- "(base address 0x%04x, revision %u)\n", *addr, rev);
+ printk(KERN_INFO "smsc47b397: found SMSC %s "
+ "(base address 0x%04x, revision %u)\n",
+ id == 0x81 ? "SCH5307-NS" : "LPC47B397-NC", *addr, rev);
superio_exit();
return 0;
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index c9cc683..5905c1a 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -3,7 +3,7 @@
for hardware monitoring
Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x,
- LPC47M15x and LPC47M192 Super-I/O chips.
+ LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
@@ -356,6 +356,8 @@
* 0x5F) and LPC47B27x (device id 0x51) have fan control.
* The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
* can do much more besides (device id 0x60).
+ * The LPC47M997 is undocumented, but seems to be compatible with
+ * the LPC47M192, and has the same device id.
*/
if (val == 0x51)
printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
@@ -364,7 +366,8 @@
else if (val == 0x5F)
printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
else if (val == 0x60)
- printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n");
+ printk(KERN_INFO "smsc47m1: Found SMSC "
+ "LPC47M15x/LPC47M192/LPC47M997\n");
else {
superio_exit();
return -ENODEV;
@@ -396,11 +399,10 @@
return -EBUSY;
}
- if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
err = -ENOMEM;
goto error_release;
}
- memset(data, 0x00, sizeof(struct smsc47m1_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 05ddc88..6f696f8 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -44,7 +44,7 @@
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static unsigned short force_addr = 0;
+static unsigned short force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
@@ -198,7 +198,7 @@
but the function is very linear in the useful range (0-80 deg C), so
we'll just use linear interpolation for 10-bit readings.) So, tempLUT
is the temp at via register values 0-255: */
-static const long tempLUT[] =
+static const s16 tempLUT[] =
{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
-503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
-362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
@@ -270,7 +270,7 @@
}
/* for 8-bit temperature hyst and over registers */
-#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100)
+#define TEMP_FROM_REG(val) ((long)tempLUT[val] * 100)
/* for 10-bit temperature readings */
static inline long TEMP_FROM_REG10(u16 val)
@@ -589,10 +589,8 @@
u16 val;
/* 8231 requires multiple of 256, we enforce that on 686 as well */
- if (force_addr)
- address = force_addr & 0xFF00;
-
if (force_addr) {
+ address = force_addr & 0xFF00;
dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
address);
if (PCIBIOS_SUCCESSFUL !=
@@ -603,11 +601,17 @@
pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
return -ENODEV;
if (!(val & 0x0001)) {
- dev_warn(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
- val | 0x0001))
+ if (force_addr) {
+ dev_info(&adapter->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
+ } else {
+ dev_warn(&adapter->dev, "sensors disabled - enable "
+ "with force_addr=0x%x\n", address);
return -ENODEV;
+ }
}
/* Reserve the ISA region */
@@ -617,11 +621,10 @@
return -ENODEV;
}
- if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- memset(data, 0, sizeof(struct via686a_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -708,7 +711,6 @@
return 0;
}
-/* Called when we have found a new VIA686A. Set limits, etc. */
static void via686a_init_client(struct i2c_client *client)
{
u8 reg;
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index b60efe8..eee22a5 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -105,7 +105,9 @@
* ISA constants
*/
-#define REGION_LENGTH 8
+#define REGION_ALIGNMENT ~7
+#define REGION_OFFSET 5
+#define REGION_LENGTH 2
#define ADDR_REG_OFFSET 5
#define DATA_REG_OFFSET 6
@@ -673,16 +675,16 @@
struct w83627ehf_data *data;
int i, err = 0;
- if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) {
+ if (!request_region(address + REGION_OFFSET, REGION_LENGTH,
+ w83627ehf_driver.name)) {
err = -EBUSY;
goto exit;
}
- if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- memset(data, 0, sizeof(struct w83627ehf_data));
client = &data->client;
i2c_set_clientdata(client, data);
@@ -762,7 +764,7 @@
exit_free:
kfree(data);
exit_release:
- release_region(address, REGION_LENGTH);
+ release_region(address + REGION_OFFSET, REGION_LENGTH);
exit:
return err;
}
@@ -776,7 +778,7 @@
if ((err = i2c_detach_client(client)))
return err;
- release_region(client->addr, REGION_LENGTH);
+ release_region(client->addr + REGION_OFFSET, REGION_LENGTH);
kfree(data);
return 0;
@@ -807,7 +809,7 @@
superio_select(W83627EHF_LD_HWM);
val = (superio_inb(SIO_REG_ADDR) << 8)
| superio_inb(SIO_REG_ADDR + 1);
- *addr = val & ~(REGION_LENGTH - 1);
+ *addr = val & REGION_ALIGNMENT;
if (*addr == 0) {
superio_exit();
return -ENODEV;
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 3479dc5..70ef926 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -142,10 +142,14 @@
#define WINB_BASE_REG 0x60
/* Constants specified below */
-/* Length of ISA address segment */
-#define WINB_EXTENT 8
+/* Alignment of the base address */
+#define WINB_ALIGNMENT ~7
-/* Where are the ISA address/data registers relative to the base address */
+/* Offset & size of I/O region we are interested in */
+#define WINB_REGION_OFFSET 5
+#define WINB_REGION_SIZE 2
+
+/* Where are the sensors address/data registers relative to the base address */
#define W83781D_ADDR_REG_OFFSET 5
#define W83781D_DATA_REG_OFFSET 6
@@ -197,7 +201,6 @@
#define W83627HF_REG_PWM1 0x5A
#define W83627HF_REG_PWM2 0x5B
-#define W83627HF_REG_PWMCLK12 0x5C
#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */
#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */
@@ -981,7 +984,7 @@
superio_select(W83627HF_LD_HWM);
val = (superio_inb(WINB_BASE_REG) << 8) |
superio_inb(WINB_BASE_REG + 1);
- *addr = val & ~(WINB_EXTENT - 1);
+ *addr = val & WINB_ALIGNMENT;
if (*addr == 0 && force_addr == 0) {
superio_exit();
return -ENODEV;
@@ -1000,9 +1003,10 @@
const char *client_name = "";
if(force_addr)
- address = force_addr & ~(WINB_EXTENT - 1);
+ address = force_addr & WINB_ALIGNMENT;
- if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) {
+ if (!request_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE,
+ w83627hf_driver.name)) {
err = -EBUSY;
goto ERROR0;
}
@@ -1041,11 +1045,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access w83627hf_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- memset(data, 0, sizeof(struct w83627hf_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -1148,7 +1151,7 @@
ERROR2:
kfree(data);
ERROR1:
- release_region(address, WINB_EXTENT);
+ release_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE);
ERROR0:
return err;
}
@@ -1163,7 +1166,7 @@
if ((err = i2c_detach_client(client)))
return err;
- release_region(client->addr, WINB_EXTENT);
+ release_region(client->addr + WINB_REGION_OFFSET, WINB_REGION_SIZE);
kfree(data);
return 0;
@@ -1275,7 +1278,6 @@
return 0;
}
-/* Called when we have found a new W83781D. It should set limits, etc. */
static void w83627hf_init_client(struct i2c_client *client)
{
struct w83627hf_data *data = i2c_get_clientdata(client);
@@ -1369,12 +1371,6 @@
}
}
- if (type == w83627hf) {
- /* enable PWM2 control (can't hurt since PWM reg
- should have been reset to 0xff) */
- w83627hf_write_value(client, W83627HF_REG_PWMCLK12,
- 0x19);
- }
/* enable comparator mode for temp2 and temp3 so
alarm indication will work correctly */
i = w83627hf_read_value(client, W83781D_REG_IRQ);
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 4c43337..9265f32 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -889,12 +889,11 @@
const char *client_name = "";
struct w83781d_data *data = i2c_get_clientdata(new_client);
- data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[0])) {
err = -ENOMEM;
goto ERROR_SC_0;
}
- memset(data->lm75[0], 0x00, sizeof (struct i2c_client));
id = i2c_adapter_id(adapter);
@@ -919,13 +918,11 @@
}
if (kind != w83783s) {
-
- data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[1])) {
err = -ENOMEM;
goto ERROR_SC_1;
}
- memset(data->lm75[1], 0x0, sizeof(struct i2c_client));
if (force_subclients[0] == id &&
force_subclients[1] == address) {
@@ -1064,11 +1061,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access w83781d_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- memset(data, 0, sizeof(struct w83781d_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -1451,7 +1447,6 @@
return 0;
}
-/* Called when we have found a new W83781D. It should set limits, etc. */
static void
w83781d_init_client(struct i2c_client *client)
{
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index ba0c280..4be59db 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1086,11 +1086,10 @@
int err;
struct i2c_client *sub_client;
- (*sub_cli) = sub_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ (*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(sub_client)) {
return -ENOMEM;
}
- memset(sub_client, 0x00, sizeof(struct i2c_client));
sub_client->addr = 0x48 + addr;
i2c_set_clientdata(sub_client, NULL);
sub_client->adapter = adapter;
@@ -1184,11 +1183,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access w83792d_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct w83792d_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
- memset(data, 0, sizeof(struct w83792d_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -1429,7 +1427,6 @@
return 0;
}
-/* Called when we have found a new W83792D. It should set limits, etc. */
static void
w83792d_init_client(struct i2c_client *client)
{
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 133e34a..f495b63 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -37,6 +37,7 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
/* How many retries on register read error */
@@ -73,7 +74,7 @@
* The W83L785TS-S uses signed 8-bit values.
*/
-#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000)
+#define TEMP_FROM_REG(val) ((val) * 1000)
/*
* Functions declaration
@@ -111,27 +112,24 @@
unsigned long last_updated; /* in jiffies */
/* registers values */
- u8 temp, temp_over;
+ s8 temp[2]; /* 0: input
+ 1: critical limit */
};
/*
* Sysfs stuff
*/
-static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+ char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct w83l785ts_data *data = w83l785ts_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
}
-static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83l785ts_data *data = w83l785ts_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
-}
-
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
-static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1);
/*
* Real code
@@ -158,12 +156,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct w83l785ts_data));
-
/* The common I2C client data is placed right before the
* W83L785TS-specific data. */
@@ -228,7 +224,7 @@
init_MUTEX(&data->update_lock);
/* Default values in case the first read fails (unlikely). */
- data->temp_over = data->temp = 0;
+ data->temp[1] = data->temp[0] = 0;
/* Tell the I2C layer a new client has arrived. */
if ((err = i2c_attach_client(new_client)))
@@ -246,8 +242,10 @@
goto exit_detach;
}
- device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp1_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp1_max.dev_attr);
return 0;
@@ -305,10 +303,10 @@
if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
dev_dbg(&client->dev, "Updating w83l785ts data.\n");
- data->temp = w83l785ts_read_value(client,
- W83L785TS_REG_TEMP, data->temp);
- data->temp_over = w83l785ts_read_value(client,
- W83L785TS_REG_TEMP_OVER, data->temp_over);
+ data->temp[0] = w83l785ts_read_value(client,
+ W83L785TS_REG_TEMP, data->temp[0]);
+ data->temp[1] = w83l785ts_read_value(client,
+ W83L785TS_REG_TEMP_OVER, data->temp[1]);
data->last_updated = jiffies;
data->valid = 1;
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index beb10ed..82946ac 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -34,7 +34,7 @@
#define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0)
#define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0)
-static int i2c_debug=0;
+static int i2c_debug;
#define pca_outw(adap, reg, val) adap->write_byte(adap, reg, val)
#define pca_inw(adap, reg) adap->read_byte(adap, reg)
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 8ed5ad1..938848a 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -42,7 +42,7 @@
/* module parameters:
*/
-static int bit_scan=0; /* have a look at what's hanging 'round */
+static int bit_scan; /* have a look at what's hanging 'round */
static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 3badfec..4010fe9 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -135,11 +135,12 @@
help
If you say yes to this option, support will be included for the Intel
810/815 family of mainboard I2C interfaces. Specifically, the
- following versions of the chipset is supported:
+ following versions of the chipset are supported:
i810AA
i810AB
i810E
i815
+ i845G
This driver can also be built as a module. If so, the module
will be called i2c-i810.
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index f021acd..ba90f51 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -134,7 +134,7 @@
/* -> Read = 1 */
#define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */
-
+static struct pci_driver ali1535_driver;
static unsigned short ali1535_smba;
static DECLARE_MUTEX(i2c_ali1535_sem);
@@ -162,7 +162,8 @@
goto exit;
}
- if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) {
+ if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+ ali1535_driver.name)) {
dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
ali1535_smba);
goto exit;
@@ -480,7 +481,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id ali1535_ids[] = {
@@ -513,6 +513,7 @@
}
static struct pci_driver ali1535_driver = {
+ .owner = THIS_MODULE,
.name = "ali1535_smbus",
.id_table = ali1535_ids,
.probe = ali1535_probe,
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 8694750..f1a62d8 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -60,6 +60,7 @@
#define HST_CNTL2_SIZEMASK 0x38
+static struct pci_driver ali1563_pci_driver;
static unsigned short ali1563_smba;
static int ali1563_transaction(struct i2c_adapter * a, int size)
@@ -350,7 +351,8 @@
dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
goto Err;
}
- if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) {
+ if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+ ali1563_pci_driver.name)) {
dev_warn(&dev->dev,"Could not allocate I/O space");
goto Err;
}
@@ -406,7 +408,8 @@
MODULE_DEVICE_TABLE (pci, ali1563_id_table);
static struct pci_driver ali1563_pci_driver = {
- .name = "ali1563_i2c",
+ .owner = THIS_MODULE,
+ .name = "ali1563_smbus",
.id_table = ali1563_id_table,
.probe = ali1563_probe,
.remove = __devexit_p(ali1563_remove),
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index b3f50bf..400b08e 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -125,12 +125,13 @@
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the i2c controller");
-static unsigned short ali15x3_smba = 0;
+static struct pci_driver ali15x3_driver;
+static unsigned short ali15x3_smba;
static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
{
@@ -166,7 +167,8 @@
if(force_addr)
ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
- if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) {
+ if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+ ali15x3_driver.name)) {
dev_err(&ALI15X3_dev->dev,
"ALI15X3_smb region 0x%x already in use!\n",
ali15x3_smba);
@@ -470,7 +472,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id ali15x3_ids[] = {
@@ -503,6 +504,7 @@
}
static struct pci_driver ali15x3_driver = {
+ .owner = THIS_MODULE,
.name = "ali15x3_smbus",
.id_table = ali15x3_ids,
.probe = ali15x3_probe,
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 4e553e8..f51ab65 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -169,12 +169,12 @@
init_MUTEX(&amd756_lock);
/* Define the 5 virtual adapters and algorithms structures */
- if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter),
+ if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter),
GFP_KERNEL))) {
error = -ENOMEM;
goto ERROR1;
}
- if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm),
+ if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm),
GFP_KERNEL))) {
error = -ENOMEM;
goto ERROR2;
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 6ad0603..de035d1 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -85,8 +85,8 @@
#define AMD756_PROCESS_CALL 0x04
#define AMD756_BLOCK_DATA 0x05
-
-static unsigned short amd756_ioport = 0;
+static struct pci_driver amd756_driver;
+static unsigned short amd756_ioport;
/*
SMBUS event = I/O 28-29 bit 11
@@ -303,7 +303,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
@@ -365,7 +364,7 @@
amd756_ioport += SMB_ADDR_OFFSET;
}
- if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) {
+ if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
amd756_ioport);
return -ENODEV;
@@ -402,6 +401,7 @@
}
static struct pci_driver amd756_driver = {
+ .owner = THIS_MODULE,
.name = "amd756_smbus",
.id_table = amd756_ids,
.probe = amd756_probe,
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 45ea24b..f3b79a6 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -30,6 +30,8 @@
int size;
};
+static struct pci_driver amd8111_driver;
+
/*
* AMD PCI control registers definitions.
*/
@@ -242,7 +244,6 @@
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
- protocol |= pec;
len = min_t(u8, data->block[0], 31);
amd_ec_write(smbus, AMD_SMB_CMD, command);
amd_ec_write(smbus, AMD_SMB_BCNT, len);
@@ -252,13 +253,6 @@
read_write = I2C_SMBUS_READ;
break;
- case I2C_SMBUS_WORD_DATA_PEC:
- case I2C_SMBUS_BLOCK_DATA_PEC:
- case I2C_SMBUS_PROC_CALL_PEC:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
- return -1;
-
default:
dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -343,16 +337,15 @@
if (~pci_resource_flags(dev, 0) & IORESOURCE_IO)
return -ENODEV;
- smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL);
+ smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL);
if (!smbus)
return -ENOMEM;
- memset(smbus, 0, sizeof(struct amd_smbus));
smbus->dev = dev;
smbus->base = pci_resource_start(dev, 0);
smbus->size = pci_resource_len(dev, 0);
- if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0"))
+ if (!request_region(smbus->base, smbus->size, amd8111_driver.name))
goto out_kfree;
smbus->adapter.owner = THIS_MODULE;
@@ -391,6 +384,7 @@
}
static struct pci_driver amd8111_driver = {
+ .owner = THIS_MODULE,
.name = "amd8111_smbus2",
.id_table = amd8111_ids,
.probe = amd8111_probe,
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 6930b66..59f8308 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -22,7 +22,7 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
Frodo Looijaard <frodol@dds.nl> */
-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
+/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
for Alpha Processor Inc. UP-2000(+) boards */
#include <linux/kernel.h>
@@ -46,12 +46,14 @@
#define DEFAULT_BASE 0x330
static int base;
+static u8 __iomem *base_iomem;
+
static int irq;
static int clock = 0x1c;
static int own = 0x55;
static int mmapped;
-/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
+/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
this module in real supports only one device, due to missing arguments
in some functions, called from the algo-pcf module. Sometimes it's
need to be rewriten - but for now just remove this for simpler reading */
@@ -60,40 +62,33 @@
static int pcf_pending;
static spinlock_t lock;
+static struct i2c_adapter pcf_isa_ops;
+
/* ----- local functions ---------------------------------------------- */
static void pcf_isa_setbyte(void *data, int ctl, int val)
{
- int address = ctl ? (base + 1) : base;
+ u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
/* enable irq if any specified for serial operation */
if (ctl && irq && (val & I2C_PCF_ESO)) {
val |= I2C_PCF_ENI;
}
- pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255);
-
- switch (mmapped) {
- case 0: /* regular I/O */
- outb(val, address);
- break;
- case 2: /* double mapped I/O needed for UP2000 board,
- I don't know why this... */
- writeb(val, (void *)address);
- /* fall */
- case 1: /* memory mapped I/O */
- writeb(val, (void *)address);
- break;
- }
+ pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val);
+ iowrite8(val, address);
+#ifdef __alpha__
+ /* API UP2000 needs some hardware fudging to make the write stick */
+ iowrite8(val, address);
+#endif
}
static int pcf_isa_getbyte(void *data, int ctl)
{
- int address = ctl ? (base + 1) : base;
- int val = mmapped ? readb((void *)address) : inb(address);
+ u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
+ int val = ioread8(address);
- pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val);
-
+ pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val);
return (val);
}
@@ -149,16 +144,40 @@
{
spin_lock_init(&lock);
if (!mmapped) {
- if (!request_region(base, 2, "i2c (isa bus adapter)")) {
- printk(KERN_ERR
- "i2c-elektor: requested I/O region (0x%X:2) "
- "is in use.\n", base);
+ if (!request_region(base, 2, pcf_isa_ops.name)) {
+ printk(KERN_ERR "%s: requested I/O region (%#x:2) is "
+ "in use\n", pcf_isa_ops.name, base);
+ return -ENODEV;
+ }
+ base_iomem = ioport_map(base, 2);
+ if (!base_iomem) {
+ printk(KERN_ERR "%s: remap of I/O region %#x failed\n",
+ pcf_isa_ops.name, base);
+ release_region(base, 2);
+ return -ENODEV;
+ }
+ } else {
+ if (!request_mem_region(base, 2, pcf_isa_ops.name)) {
+ printk(KERN_ERR "%s: requested memory region (%#x:2) "
+ "is in use\n", pcf_isa_ops.name, base);
+ return -ENODEV;
+ }
+ base_iomem = ioremap(base, 2);
+ if (base_iomem == NULL) {
+ printk(KERN_ERR "%s: remap of memory region %#x "
+ "failed\n", pcf_isa_ops.name, base);
+ release_mem_region(base, 2);
return -ENODEV;
}
}
+ pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base,
+ base_iomem);
+
if (irq > 0) {
- if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) {
- printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq);
+ if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name,
+ NULL) < 0) {
+ printk(KERN_ERR "%s: Request irq%d failed\n",
+ pcf_isa_ops.name, irq);
irq = 0;
} else
enable_irq(irq);
@@ -186,47 +205,49 @@
.class = I2C_CLASS_HWMON,
.id = I2C_HW_P_ELEK,
.algo_data = &pcf_isa_data,
- .name = "PCF8584 ISA adapter",
+ .name = "i2c-elektor",
};
-static int __init i2c_pcfisa_init(void)
+static int __init i2c_pcfisa_init(void)
{
#ifdef __alpha__
- /* check to see we have memory mapped PCF8584 connected to the
+ /* check to see we have memory mapped PCF8584 connected to the
Cypress cy82c693 PCI-ISA bridge as on UP2000 board */
if (base == 0) {
struct pci_dev *cy693_dev;
-
- cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
+
+ cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
PCI_DEVICE_ID_CONTAQ_82C693, NULL);
if (cy693_dev) {
- char config;
+ unsigned char config;
/* yeap, we've found cypress, let's check config */
if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
-
- pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config);
+
+ pr_debug("%s: found cy82c693, config "
+ "register 0x47 = 0x%02x\n",
+ pcf_isa_ops.name, config);
/* UP2000 board has this register set to 0xe1,
- but the most significant bit as seems can be
+ but the most significant bit as seems can be
reset during the proper initialisation
- sequence if guys from API decides to do that
- (so, we can even enable Tsunami Pchip
- window for the upper 1 Gb) */
+ sequence if guys from API decides to do that
+ (so, we can even enable Tsunami Pchip
+ window for the upper 1 Gb) */
/* so just check for ROMCS at 0xe0000,
- ROMCS enabled for writes
+ ROMCS enabled for writes
and external XD Bus buffer in use. */
if ((config & 0x7f) == 0x61) {
/* seems to be UP2000 like board */
base = 0xe0000;
- /* I don't know why we need to
- write twice */
- mmapped = 2;
- /* UP2000 drives ISA with
+ mmapped = 1;
+ /* UP2000 drives ISA with
8.25 MHz (PCI/4) clock
(this can be read from cypress) */
clock = I2C_PCF_CLK | I2C_PCF_TRNS90;
- printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n");
+ pr_info("%s: found API UP2000 like "
+ "board, will probe PCF8584 "
+ "later\n", pcf_isa_ops.name);
}
}
pci_dev_put(cy693_dev);
@@ -236,12 +257,11 @@
/* sanity checks for mmapped I/O */
if (mmapped && base < 0xc8000) {
- printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base);
+ printk(KERN_ERR "%s: incorrect base address (%#x) specified "
+ "for mmapped I/O\n", pcf_isa_ops.name, base);
return -ENODEV;
}
- printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n");
-
if (base == 0) {
base = DEFAULT_BASE;
}
@@ -251,8 +271,8 @@
return -ENODEV;
if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
goto fail;
-
- printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base);
+
+ dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base);
return 0;
@@ -262,8 +282,13 @@
free_irq(irq, NULL);
}
- if (!mmapped)
- release_region(base , 2);
+ if (!mmapped) {
+ ioport_unmap(base_iomem);
+ release_region(base, 2);
+ } else {
+ iounmap(base_iomem);
+ release_mem_region(base, 2);
+ }
return -ENODEV;
}
@@ -276,8 +301,13 @@
free_irq(irq, NULL);
}
- if (!mmapped)
- release_region(base , 2);
+ if (!mmapped) {
+ ioport_unmap(base_iomem);
+ release_region(base, 2);
+ } else {
+ iounmap(base_iomem);
+ release_mem_region(base, 2);
+ }
}
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index e0cb3b0..1b5354e 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -155,6 +155,7 @@
static struct pci_driver hydra_driver = {
+ .owner = THIS_MODULE,
.name = "hydra_smbus",
.id_table = hydra_ids,
.probe = hydra_probe,
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 709beab..4f63195 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -52,10 +52,6 @@
#include <linux/i2c.h>
#include <asm/io.h>
-#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC
-#define HAVE_PEC
-#endif
-
/* I801 SMBus address offsets */
#define SMBHSTSTS (0 + i801_smba)
#define SMBHSTCNT (2 + i801_smba)
@@ -106,10 +102,11 @@
"EXTREMELY DANGEROUS!");
static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data,
- char read_write, int command);
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+ int command, int hwpec);
static unsigned short i801_smba;
+static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
static int isich4;
@@ -143,7 +140,7 @@
}
}
- if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) {
+ if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
i801_smba);
error_return = -EBUSY;
@@ -252,7 +249,7 @@
/* All-inclusive block transaction function */
static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command)
+ int command, int hwpec)
{
int i, len;
int smbcmd;
@@ -391,8 +388,7 @@
goto END;
}
-#ifdef HAVE_PEC
- if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) {
+ if (hwpec) {
/* wait for INTR bit as advised by Intel */
timeout = 0;
do {
@@ -406,7 +402,6 @@
}
outb_p(temp, SMBHSTSTS);
}
-#endif
result = 0;
END:
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
@@ -421,14 +416,13 @@
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data * data)
{
- int hwpec = 0;
+ int hwpec;
int block = 0;
int ret, xact = 0;
-#ifdef HAVE_PEC
- if(isich4)
- hwpec = (flags & I2C_CLIENT_PEC) != 0;
-#endif
+ hwpec = isich4 && (flags & I2C_CLIENT_PEC)
+ && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA;
switch (size) {
case I2C_SMBUS_QUICK:
@@ -463,11 +457,6 @@
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_I2C_BLOCK_DATA:
-#ifdef HAVE_PEC
- case I2C_SMBUS_BLOCK_DATA_PEC:
- if(hwpec && size == I2C_SMBUS_BLOCK_DATA)
- size = I2C_SMBUS_BLOCK_DATA_PEC;
-#endif
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
SMBHSTADD);
outb_p(command, SMBHSTCMD);
@@ -479,27 +468,18 @@
return -1;
}
-#ifdef HAVE_PEC
- if(isich4 && hwpec) {
- if(size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- outb_p(1, SMBAUXCTL); /* enable HW PEC */
- }
-#endif
+ if (hwpec)
+ outb_p(1, SMBAUXCTL); /* enable hardware PEC */
+
if(block)
- ret = i801_block_transaction(data, read_write, size);
+ ret = i801_block_transaction(data, read_write, size, hwpec);
else {
outb_p(xact | ENABLE_INT9, SMBHSTCNT);
ret = i801_transaction();
}
-#ifdef HAVE_PEC
- if(isich4 && hwpec) {
- if(size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- outb_p(0, SMBAUXCTL);
- }
-#endif
+ if (hwpec)
+ outb_p(0, SMBAUXCTL); /* disable hardware PEC */
if(block)
return ret;
@@ -526,12 +506,7 @@
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
-#ifdef HAVE_PEC
- | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC |
- I2C_FUNC_SMBUS_HWPEC_CALC
- : 0)
-#endif
- ;
+ | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0);
}
static struct i2c_algorithm smbus_algorithm = {
@@ -543,7 +518,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id i801_ids[] = {
@@ -586,6 +560,7 @@
}
static struct pci_driver i801_driver = {
+ .owner = THIS_MODULE,
.name = "i801_smbus",
.id_table = i801_ids,
.probe = i801_probe,
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
index 0ff7016..52bc305 100644
--- a/drivers/i2c/busses/i2c-i810.c
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -32,6 +32,7 @@
i810AB 7123
i810E 7125
i815 1132
+ i845G 2562
*/
#include <linux/kernel.h>
@@ -232,6 +233,7 @@
}
static struct pci_driver i810_driver = {
+ .owner = THIS_MODULE,
.name = "i810_smbus",
.id_table = i810_ids,
.probe = i810_probe,
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index a3ed959..1a58725 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -672,13 +672,12 @@
printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
ocp->def->index);
- if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
+ if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) {
printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
ocp->def->index);
return -ENOMEM;
}
- memset(dev, 0, sizeof(*dev));
dev->idx = ocp->def->index;
ocp_set_drvdata(ocp, dev);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 7bd9102..9888fae 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -43,7 +43,7 @@
#include "i2c-iop3xx.h"
/* global unit counter */
-static int i2c_id = 0;
+static int i2c_id;
static inline unsigned char
iic_cook_addr(struct i2c_msg *msg)
@@ -440,19 +440,17 @@
struct i2c_adapter *new_adapter;
struct i2c_algo_iop3xx_data *adapter_data;
- new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
if (!new_adapter) {
ret = -ENOMEM;
goto out;
}
- memset((void*)new_adapter, 0, sizeof(*new_adapter));
- adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
+ adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
if (!adapter_data) {
ret = -ENOMEM;
goto free_adapter;
}
- memset((void*)adapter_data, 0, sizeof(*adapter_data));
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -525,6 +523,7 @@
static struct device_driver iop3xx_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "IOP3xx-I2C",
.bus = &platform_bus_type,
.probe = iop3xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index bdc6806..4fdc024 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -92,6 +92,7 @@
/* Add the driver to the list of i2c drivers in the driver core */
driver->driver.name = driver->name;
+ driver->driver.owner = driver->owner;
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_isa_device_probe;
driver->driver.remove = i2c_isa_device_remove;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 1956af3..42016ee 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -36,6 +36,8 @@
#include <asm/hardware.h> /* Pick up IXP2000-specific bits */
#include <asm/arch/gpio.h>
+static struct device_driver ixp2000_i2c_driver;
+
static inline int ixp2000_scl_pin(void *data)
{
return ((struct ixp2000_i2c_pins*)data)->scl_pin;
@@ -104,11 +106,10 @@
struct platform_device *plat_dev = to_platform_device(dev);
struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
struct ixp2000_i2c_data *drv_data =
- kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
+ kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
- memzero(drv_data, sizeof(*drv_data));
drv_data->gpio_pins = gpio;
drv_data->algo_data.data = gpio;
@@ -121,6 +122,8 @@
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP2000,
+ strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name,
+ I2C_NAME_SIZE);
drv_data->adapter.algo_data = &drv_data->algo_data,
drv_data->adapter.dev.parent = &plat_dev->dev;
@@ -142,6 +145,7 @@
}
static struct device_driver ixp2000_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "IXP2000-I2C",
.bus = &platform_bus_type,
.probe = ixp2000_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index f6f5ca3..69303ab 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -35,6 +35,8 @@
#include <asm/hardware.h> /* Pick up IXP4xx-specific bits */
+static struct device_driver ixp4xx_i2c_driver;
+
static inline int ixp4xx_scl_pin(void *data)
{
return ((struct ixp4xx_i2c_pins*)data)->scl_pin;
@@ -105,12 +107,11 @@
struct platform_device *plat_dev = to_platform_device(dev);
struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data;
struct ixp4xx_i2c_data *drv_data =
- kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
+ kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
if(!drv_data)
return -ENOMEM;
- memzero(drv_data, sizeof(struct ixp4xx_i2c_data));
drv_data->gpio_pins = gpio;
/*
@@ -129,6 +130,8 @@
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP4XX;
+ strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name,
+ I2C_NAME_SIZE);
drv_data->adapter.algo_data = &drv_data->algo_data;
drv_data->adapter.dev.parent = &plat_dev->dev;
@@ -151,6 +154,7 @@
}
static struct device_driver ixp4xx_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "IXP4XX-I2C",
.bus = &platform_bus_type,
.probe = ixp4xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
index eff5896..d61f748 100644
--- a/drivers/i2c/busses/i2c-keywest.c
+++ b/drivers/i2c/busses/i2c-keywest.c
@@ -535,13 +535,12 @@
tsize = sizeof(struct keywest_iface) +
(sizeof(struct keywest_chan) + 4) * nchan;
- iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL);
+ iface = kzalloc(tsize, GFP_KERNEL);
if (iface == NULL) {
printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
pmac_low_i2c_unlock(np);
return -ENOMEM;
}
- memset(iface, 0, tsize);
spin_lock_init(&iface->lock);
init_completion(&iface->complete);
iface->node = of_node_get(np);
@@ -716,6 +715,7 @@
static struct macio_driver i2c_keywest_macio_driver =
{
+ .owner = THIS_MODULE,
.name = "i2c-keywest",
.match_table = i2c_keywest_match,
.probe = create_iface_macio,
@@ -724,6 +724,7 @@
static struct of_platform_driver i2c_keywest_of_platform_driver =
{
+ .owner = THIS_MODULE,
.name = "i2c-keywest",
.match_table = i2c_keywest_match,
.probe = create_iface_of_platform,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f065583..8491633 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -296,10 +296,9 @@
pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
- if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
+ if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) {
return -ENOMEM;
}
- memset(i2c, 0, sizeof(*i2c));
i2c->irq = platform_get_irq(pdev, 0);
i2c->flags = pdata->device_flags;
@@ -361,6 +360,7 @@
/* Structure for a device driver */
static struct device_driver fsl_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "fsl-i2c",
.bus = &platform_bus_type,
.probe = fsl_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 99abca4..d0d2a6f 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -500,13 +500,10 @@
if ((pd->id != 0) || !pdata)
return -ENODEV;
- drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
-
+ drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
- memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data));
-
if (mv64xxx_i2c_map_regs(pd, drv_data)) {
rc = -ENODEV;
goto exit_kfree;
@@ -570,6 +567,7 @@
}
static struct device_driver mv64xxx_i2c_driver = {
+ .owner = THIS_MODULE,
.name = MV64XXX_I2C_CTLR_NAME,
.bus = &platform_bus_type,
.probe = mv64xxx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index fe9c0f4..fd26036 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -97,6 +97,7 @@
#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
#define NVIDIA_SMB_PRTCL_PEC 0x80
+static struct pci_driver nforce2_driver;
static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
@@ -113,7 +114,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
/* Return -1 on error. See smbus.h for more information */
@@ -188,13 +188,6 @@
dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
return -1;
- case I2C_SMBUS_WORD_DATA_PEC:
- case I2C_SMBUS_BLOCK_DATA_PEC:
- case I2C_SMBUS_PROC_CALL_PEC:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
- return -1;
-
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -285,7 +278,7 @@
smbus->base = iobase & 0xfffc;
smbus->size = 8;
- if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) {
+ if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
smbus->base, smbus->base+smbus->size-1, name);
return -1;
@@ -313,10 +306,8 @@
int res1, res2;
/* we support 2 SMBus adapters */
- if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus),
- GFP_KERNEL)))
+ if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL)))
return -ENOMEM;
- memset (smbuses, 0, 2*sizeof(struct nforce2_smbus));
pci_set_drvdata(dev, smbuses);
/* SMBus adapter 1 */
@@ -356,6 +347,7 @@
}
static struct pci_driver nforce2_driver = {
+ .owner = THIS_MODULE,
.name = "nForce2_smbus",
.id_table = nforce2_ids,
.probe = nforce2_probe,
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 71a2502..2854d85 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -155,12 +155,11 @@
{
struct i2c_par *adapter;
- adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL);
+ adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
if (adapter == NULL) {
- printk(KERN_ERR "i2c-parport: Failed to kmalloc\n");
+ printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
return;
}
- memset(adapter, 0x00, sizeof(struct i2c_par));
pr_debug("i2c-parport: attaching to %s\n", port->name);
adapter->pdev = parport_register_device(port, "i2c-parport",
@@ -232,7 +231,7 @@
}
}
-static struct parport_driver i2c_driver = {
+static struct parport_driver i2c_parport_driver = {
.name = "i2c-parport",
.attach = i2c_parport_attach,
.detach = i2c_parport_detach,
@@ -250,12 +249,12 @@
type = 0;
}
- return parport_register_driver(&i2c_driver);
+ return parport_register_driver(&i2c_parport_driver);
}
static void __exit i2c_parport_exit(void)
{
- parport_unregister_driver(&i2c_driver);
+ parport_unregister_driver(&i2c_parport_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 6d48a4d..7d63eec 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -90,13 +90,13 @@
/* If force is set to anything different from 0, we forcibly enable the
PIIX4. DANGEROUS! */
-static int force = 0;
+static int force;
module_param (force, int, 0);
MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
/* If force_addr is set to anything different from 0, we forcibly enable
the PIIX4 at the given address. VERY DANGEROUS! */
-static int force_addr = 0;
+static int force_addr;
module_param (force_addr, int, 0);
MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
@@ -104,14 +104,15 @@
/* If fix_hstcfg is set to anything different from 0, we reset one of the
registers to be a valid value. */
-static int fix_hstcfg = 0;
+static int fix_hstcfg;
module_param (fix_hstcfg, int, 0);
MODULE_PARM_DESC(fix_hstcfg,
"Fix config register. Needed on some boards (Force CPCI735).");
static int piix4_transaction(void);
-static unsigned short piix4_smba = 0;
+static unsigned short piix4_smba;
+static struct pci_driver piix4_driver;
static struct i2c_adapter piix4_adapter;
static struct dmi_system_id __devinitdata piix4_dmi_table[] = {
@@ -157,7 +158,7 @@
}
}
- if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) {
+ if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
piix4_smba);
return -ENODEV;
@@ -407,7 +408,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id piix4_ids[] = {
@@ -462,6 +462,7 @@
}
static struct pci_driver piix4_driver = {
+ .owner = THIS_MODULE,
.name = "piix4_smbus",
.id_table = piix4_ids,
.probe = piix4_probe,
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
index 8a9f564..bfefe7f 100644
--- a/drivers/i2c/busses/i2c-pmac-smu.c
+++ b/drivers/i2c/busses/i2c-pmac-smu.c
@@ -211,12 +211,11 @@
}
busid = *reg;
- iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL);
+ iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
if (iface == NULL) {
printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
return -ENOMEM;
}
- memset(iface, 0, sizeof(struct smu_iface));
init_completion(&iface->complete);
iface->busid = busid;
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
index 83fd16d..42cb1d8 100644
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ b/drivers/i2c/busses/i2c-prosavage.c
@@ -83,11 +83,6 @@
/*
* i2c configuration
*/
-#ifndef I2C_HW_B_S3VIA
-#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */
-#endif
-
-/* delays */
#define CYCLE_DELAY 10
#define TIMEOUT (HZ / 2)
@@ -241,14 +236,12 @@
struct s_i2c_chip *chip;
struct s_i2c_bus *bus;
- pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
+ pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
if (chip == NULL) {
return -ENOMEM;
}
- memset(chip, 0, sizeof(struct s_i2c_chip));
-
base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
len = dev->resource[0].end - base + 1;
chip->mmio = ioremap_nocache(base, len);
@@ -308,6 +301,7 @@
MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
static struct pci_driver prosavage_driver = {
+ .owner = THIS_MODULE,
.name = "prosavage_smbus",
.id_table = prosavage_pci_tbl,
.probe = prosavage_probe,
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 73a092f..6ced28e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -879,14 +879,12 @@
}
#ifdef CONFIG_PM
-static int s3c24xx_i2c_resume(struct device *dev, u32 level)
+static int s3c24xx_i2c_resume(struct device *dev)
{
struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
-
- if (i2c != NULL && level == RESUME_ENABLE) {
- dev_dbg(dev, "resume: level %d\n", level);
+
+ if (i2c != NULL)
s3c24xx_i2c_init(i2c);
- }
return 0;
}
@@ -898,6 +896,7 @@
/* device driver for platform bus bits */
static struct device_driver s3c2410_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "s3c2410-i2c",
.bus = &platform_bus_type,
.probe = s3c24xx_i2c_probe,
@@ -906,6 +905,7 @@
};
static struct device_driver s3c2440_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "s3c2440-i2c",
.bus = &platform_bus_type,
.probe = s3c24xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
index 0c85182..aebe87b 100644
--- a/drivers/i2c/busses/i2c-savage4.c
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -179,6 +179,7 @@
}
static struct pci_driver savage4_driver = {
+ .owner = THIS_MODULE,
.name = "savage4_smbus",
.id_table = savage4_ids,
.probe = savage4_probe,
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 080318d..3ad27c3 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -123,11 +123,12 @@
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
-static unsigned short sis5595_base = 0;
+static struct pci_driver sis5595_driver;
+static unsigned short sis5595_base;
static u8 sis5595_read(u8 reg)
{
@@ -172,7 +173,8 @@
/* NB: We grab just the two SMBus registers here, but this may still
* interfere with ACPI :-( */
- if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) {
+ if (!request_region(sis5595_base + SMB_INDEX, 2,
+ sis5595_driver.name)) {
dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
return -ENODEV;
@@ -364,7 +366,6 @@
static struct i2c_adapter sis5595_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
- .name = "unset",
.algo = &smbus_algorithm,
};
@@ -397,6 +398,7 @@
}
static struct pci_driver sis5595_driver = {
+ .owner = THIS_MODULE,
.name = "sis5595_smbus",
.id_table = sis5595_ids,
.probe = sis5595_probe,
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 86f0f44..7f49e5f 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -92,6 +92,8 @@
#define SIS630_PCALL 0x04
#define SIS630_BLOCK_DATA 0x05
+static struct pci_driver sis630_driver;
+
/* insmod parameters */
static int high_clock;
static int force;
@@ -101,7 +103,7 @@
MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
/* acpi base address */
-static unsigned short acpi_base = 0;
+static unsigned short acpi_base;
/* supported chips */
static int supported[] = {
@@ -432,7 +434,8 @@
dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
/* Everything is happy, let's grab the memory and set things up. */
- if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) {
+ if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+ sis630_driver.name)) {
dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
"in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
goto exit;
@@ -455,7 +458,6 @@
static struct i2c_adapter sis630_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
- .name = "unset",
.algo = &smbus_algorithm,
};
@@ -494,6 +496,7 @@
static struct pci_driver sis630_driver = {
+ .owner = THIS_MODULE,
.name = "sis630_smbus",
.id_table = sis630_ids,
.probe = sis630_probe,
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index ead2ff3..6a134c0 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -82,8 +82,9 @@
#define SIS96x_PROC_CALL 0x04
#define SIS96x_BLOCK_DATA 0x05
+static struct pci_driver sis96x_driver;
static struct i2c_adapter sis96x_adapter;
-static u16 sis96x_smbus_base = 0;
+static u16 sis96x_smbus_base;
static inline u8 sis96x_read(u8 reg)
{
@@ -257,7 +258,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id sis96x_ids[] = {
@@ -294,7 +294,8 @@
sis96x_smbus_base);
/* Everything is happy, let's grab the memory and set things up. */
- if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) {
+ if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
+ sis96x_driver.name)) {
dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
"already in use!\n", sis96x_smbus_base,
sis96x_smbus_base + SMB_IOSIZE - 1);
@@ -328,6 +329,7 @@
}
static struct pci_driver sis96x_driver = {
+ .owner = THIS_MODULE,
.name = "sis96x_smbus",
.id_table = sis96x_ids,
.probe = sis96x_probe,
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 040b8ab..544a38e 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -43,9 +43,9 @@
/* io-region reservation */
#define IOSPACE 0x06
-#define IOTEXT "via-i2c"
-static u16 pm_io_base = 0;
+static struct pci_driver vt586b_driver;
+static u16 pm_io_base;
/*
It does not appear from the datasheet that the GPIO pins are
@@ -130,7 +130,7 @@
pci_read_config_word(dev, base, &pm_io_base);
pm_io_base &= (0xff << 8);
- if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) {
+ if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) {
dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE);
return -ENODEV;
}
@@ -159,6 +159,7 @@
static struct pci_driver vt586b_driver = {
+ .owner = THIS_MODULE,
.name = "vt586b_smbus",
.id_table = vt586b_ids,
.probe = vt586b_probe,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 99d209e..c9366b5 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -1,9 +1,10 @@
/*
i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
- Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
+ Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -21,15 +22,19 @@
*/
/*
- Supports Via devices:
- 82C596A/B (0x3050)
- 82C596B (0x3051)
- 82C686A/B
- 8231
- 8233
- 8233A (0x3147 and 0x3177)
- 8235
- 8237
+ Supports the following VIA south bridges:
+
+ Chip name PCI ID REV I2C block
+ VT82C596A 0x3050 no
+ VT82C596B 0x3051 no
+ VT82C686A 0x3057 0x30 no
+ VT82C686B 0x3057 0x40 yes
+ VT8231 0x8235 no?
+ VT8233 0x3074 yes
+ VT8233A 0x3147 yes?
+ VT8235 0x3177 yes
+ VT8237R 0x3227 yes
+
Note: we assume there can only be one device, with one SMBus interface.
*/
@@ -38,7 +43,6 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
-#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -46,48 +50,37 @@
static struct pci_dev *vt596_pdev;
-#define SMBBA1 0x90
-#define SMBBA2 0x80
-#define SMBBA3 0xD0
+#define SMBBA1 0x90
+#define SMBBA2 0x80
+#define SMBBA3 0xD0
/* SMBus address offsets */
static unsigned short vt596_smba;
#define SMBHSTSTS (vt596_smba + 0)
-#define SMBHSLVSTS (vt596_smba + 1)
#define SMBHSTCNT (vt596_smba + 2)
#define SMBHSTCMD (vt596_smba + 3)
#define SMBHSTADD (vt596_smba + 4)
#define SMBHSTDAT0 (vt596_smba + 5)
#define SMBHSTDAT1 (vt596_smba + 6)
#define SMBBLKDAT (vt596_smba + 7)
-#define SMBSLVCNT (vt596_smba + 8)
-#define SMBSHDWCMD (vt596_smba + 9)
-#define SMBSLVEVT (vt596_smba + 0xA)
-#define SMBSLVDAT (vt596_smba + 0xC)
/* PCI Address Constants */
/* SMBus data in configuration space can be found in two places,
- We try to select the better one*/
+ We try to select the better one */
-static unsigned short smb_cf_hstcfg = 0xD2;
-
-#define SMBHSTCFG (smb_cf_hstcfg)
-#define SMBSLVC (smb_cf_hstcfg + 1)
-#define SMBSHDW1 (smb_cf_hstcfg + 2)
-#define SMBSHDW2 (smb_cf_hstcfg + 3)
-#define SMBREV (smb_cf_hstcfg + 4)
+static unsigned short SMBHSTCFG = 0xD2;
/* Other settings */
#define MAX_TIMEOUT 500
-#define ENABLE_INT9 0
/* VT82C596 constants */
-#define VT596_QUICK 0x00
-#define VT596_BYTE 0x04
-#define VT596_BYTE_DATA 0x08
-#define VT596_WORD_DATA 0x0C
-#define VT596_BLOCK_DATA 0x14
+#define VT596_QUICK 0x00
+#define VT596_BYTE 0x04
+#define VT596_BYTE_DATA 0x08
+#define VT596_WORD_DATA 0x0C
+#define VT596_BLOCK_DATA 0x14
+#define VT596_I2C_BLOCK_DATA 0x34
/* If force is set to anything different from 0, we forcibly enable the
@@ -105,40 +98,65 @@
"EXTREMELY DANGEROUS!");
+static struct pci_driver vt596_driver;
static struct i2c_adapter vt596_adapter;
-/* Another internally used function */
-static int vt596_transaction(void)
+#define FEATURE_I2CBLOCK (1<<0)
+static unsigned int vt596_features;
+
+#ifdef DEBUG
+static void vt596_dump_regs(const char *msg, u8 size)
+{
+ dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
+ "DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
+ inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+ inb_p(SMBHSTDAT1));
+
+ if (size == VT596_BLOCK_DATA
+ || size == VT596_I2C_BLOCK_DATA) {
+ int i;
+
+ dev_dbg(&vt596_adapter.dev, "BLK=");
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
+ printk("%02x,", inb_p(SMBBLKDAT));
+ printk("\n");
+ dev_dbg(&vt596_adapter.dev, " ");
+ for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
+ printk("%02x,", inb_p(SMBBLKDAT));
+ printk("%02x\n", inb_p(SMBBLKDAT));
+ }
+}
+#else
+static inline void vt596_dump_regs(const char *msg, u8 size) { }
+#endif
+
+/* Return -1 on error, 0 on success */
+static int vt596_transaction(u8 size)
{
int temp;
int result = 0;
int timeout = 0;
- dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
+ vt596_dump_regs("Transaction (pre)", size);
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
- "Resetting...\n", temp);
-
+ "Resetting... ", temp);
+
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp);
-
+ printk("Failed! (0x%02x)\n", temp);
return -1;
} else {
- dev_dbg(&vt596_adapter.dev, "Successfull!\n");
+ printk("Successful!\n");
}
}
- /* start the transaction by setting bit 6 */
- outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+ /* Start the transaction by setting bit 6 */
+ outb_p(0x40 | (size & 0x3C), SMBHSTCNT);
- /* We will always wait for a fraction of a second!
- I don't know if VIA needs this, Intel did */
+ /* We will always wait for a fraction of a second */
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
@@ -147,77 +165,61 @@
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n");
+ dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
if (temp & 0x10) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n");
+ dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
+ inb_p(SMBHSTCNT) & 0x3C);
}
if (temp & 0x08) {
result = -1;
- dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be "
- "locked until next hard\nreset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
+ dev_err(&vt596_adapter.dev, "SMBus collision!\n");
}
if (temp & 0x04) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: no response!\n");
+ /* Quick commands are used to probe for chips, so
+ errors are expected, and we don't want to frighten the
+ user. */
+ if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK)
+ dev_err(&vt596_adapter.dev, "Transaction error!\n");
}
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+ /* Resetting status register */
+ if (temp & 0x1F)
outb_p(temp, SMBHSTSTS);
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_warn(&vt596_adapter.dev, "Failed reset at end "
- "of transaction (%02x)\n", temp);
- }
- }
- dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
-
+ vt596_dump_regs("Transaction (post)", size);
+
return result;
}
-/* Return -1 on error. */
+/* Return -1 on error, 0 on success */
static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data *data)
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
{
- int i, len;
+ int i;
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_info(&vt596_adapter.dev,
- "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
case I2C_SMBUS_QUICK:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
size = VT596_QUICK;
break;
case I2C_SMBUS_BYTE:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(command, SMBHSTCMD);
size = VT596_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(data->byte, SMBHSTDAT0);
size = VT596_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0);
@@ -225,28 +227,33 @@
}
size = VT596_WORD_DATA;
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (!(vt596_features & FEATURE_I2CBLOCK))
+ goto exit_unsupported;
+ if (read_write == I2C_SMBUS_READ)
+ outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
+ /* Fall through */
case I2C_SMBUS_BLOCK_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 0)
- len = 0;
+ u8 len = data->block[0];
if (len > I2C_SMBUS_BLOCK_MAX)
len = I2C_SMBUS_BLOCK_MAX;
outb_p(len, SMBHSTDAT0);
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= len; i++)
outb_p(data->block[i], SMBBLKDAT);
}
- size = VT596_BLOCK_DATA;
+ size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
+ VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
break;
+ default:
+ goto exit_unsupported;
}
- outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+ outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
- if (vt596_transaction()) /* Error in transaction */
+ if (vt596_transaction(size)) /* Error in transaction */
return -1;
if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
@@ -254,35 +261,39 @@
switch (size) {
case VT596_BYTE:
- /* Where is the result put? I assume here it is in
- * SMBHSTDAT0 but it might just as well be in the
- * SMBHSTCMD. No clue in the docs
- */
- data->byte = inb_p(SMBHSTDAT0);
- break;
case VT596_BYTE_DATA:
data->byte = inb_p(SMBHSTDAT0);
break;
case VT596_WORD_DATA:
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
break;
+ case VT596_I2C_BLOCK_DATA:
case VT596_BLOCK_DATA:
data->block[0] = inb_p(SMBHSTDAT0);
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
data->block[0] = I2C_SMBUS_BLOCK_MAX;
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= data->block[0]; i++)
data->block[i] = inb_p(SMBBLKDAT);
break;
}
return 0;
+
+exit_unsupported:
+ dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+ size);
+ return -1;
}
static u32 vt596_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA;
+
+ if (vt596_features & FEATURE_I2CBLOCK)
+ func |= I2C_FUNC_SMBUS_I2C_BLOCK;
+ return func;
}
static struct i2c_algorithm smbus_algorithm = {
@@ -294,7 +305,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static int __devinit vt596_probe(struct pci_dev *pdev,
@@ -302,7 +312,7 @@
{
unsigned char temp;
int error = -ENODEV;
-
+
/* Determine the address of the SMBus areas */
if (force_addr) {
vt596_smba = force_addr & 0xfff0;
@@ -311,12 +321,12 @@
}
if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
- !(vt596_smba & 0x1)) {
+ !(vt596_smba & 0x0001)) {
/* try 2nd address and config reg. for 596 */
if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
!pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
- (vt596_smba & 0x1)) {
- smb_cf_hstcfg = 0x84;
+ (vt596_smba & 0x0001)) {
+ SMBHSTCFG = 0x84;
} else {
/* no matches at all */
dev_err(&pdev->dev, "Cannot configure "
@@ -333,10 +343,10 @@
return -ENODEV;
}
- found:
- if (!request_region(vt596_smba, 8, "viapro-smbus")) {
+found:
+ if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
- vt596_smba);
+ vt596_smba);
return -ENODEV;
}
@@ -348,16 +358,16 @@
pci_write_config_word(pdev, id->driver_data, vt596_smba);
pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
- "address 0x%04x!\n", vt596_smba);
- } else if ((temp & 1) == 0) {
+ "address 0x%04x!\n", vt596_smba);
+ } else if (!(temp & 0x01)) {
if (force) {
- /* NOTE: This assumes I/O space and other allocations
- * WERE done by the Bios! Don't complain if your
- * hardware does weird things after enabling this.
- * :') Check for Bios updates before resorting to
+ /* NOTE: This assumes I/O space and other allocations
+ * WERE done by the Bios! Don't complain if your
+ * hardware does weird things after enabling this.
+ * :') Check for Bios updates before resorting to
* this.
*/
- pci_write_config_byte(pdev, SMBHSTCFG, temp | 1);
+ pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_info(&pdev->dev, "Enabling SMBus device\n");
} else {
dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
@@ -367,22 +377,28 @@
}
}
- if ((temp & 0x0E) == 8)
- dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n");
- else if ((temp & 0x0E) == 0)
- dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n");
- else
- dev_dbg(&pdev->dev, "Illegal Interrupt configuration "
- "(or code out of date)!\n");
-
- pci_read_config_byte(pdev, SMBREV, &temp);
- dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_VIA_8237:
+ case PCI_DEVICE_ID_VIA_8235:
+ case PCI_DEVICE_ID_VIA_8233A:
+ case PCI_DEVICE_ID_VIA_8233_0:
+ vt596_features |= FEATURE_I2CBLOCK;
+ break;
+ case PCI_DEVICE_ID_VIA_82C686_4:
+ /* The VT82C686B (rev 0x40) does support I2C block
+ transactions, but the VT82C686A (rev 0x30) doesn't */
+ if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
+ && temp >= 0x40)
+ vt596_features |= FEATURE_I2CBLOCK;
+ break;
+ }
+
vt596_adapter.dev.parent = &pdev->dev;
snprintf(vt596_adapter.name, I2C_NAME_SIZE,
- "SMBus Via Pro adapter at %04x", vt596_smba);
-
+ "SMBus Via Pro adapter at %04x", vt596_smba);
+
vt596_pdev = pci_dev_get(pdev);
if (i2c_add_adapter(&vt596_adapter)) {
pci_dev_put(vt596_pdev);
@@ -395,7 +411,7 @@
*/
return -ENODEV;
- release_region:
+release_region:
release_region(vt596_smba, 8);
return error;
}
@@ -420,9 +436,10 @@
{ 0, }
};
-MODULE_DEVICE_TABLE (pci, vt596_ids);
+MODULE_DEVICE_TABLE(pci, vt596_ids);
static struct pci_driver vt596_driver = {
+ .owner = THIS_MODULE,
.name = "vt596_smbus",
.id_table = vt596_ids,
.probe = vt596_probe,
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index b675773..650c3eb 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -225,6 +225,7 @@
}
static struct pci_driver voodoo3_driver = {
+ .owner = THIS_MODULE,
.name = "voodoo3_smbus",
.id_table = voodoo3_ids,
.probe = voodoo3_probe,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index a1d580e..d3478e0 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -442,14 +442,13 @@
int rc = 0;
char description[64];
- iface = kmalloc(sizeof(*iface), GFP_KERNEL);
+ iface = kzalloc(sizeof(*iface), GFP_KERNEL);
if (!iface) {
printk(KERN_ERR NAME ": can't allocate memory\n");
rc = -ENOMEM;
goto errout;
}
- memset(iface, 0, sizeof(*iface));
adapter = &iface->adapter;
i2c_set_adapdata(adapter, iface);
snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 6bd44a4..f9fae28 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,4 +126,13 @@
This driver can also be built as a module. If so, the module
will be called max6875.
+config RTC_X1205_I2C
+ tristate "Xicor X1205 RTC chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Xicor X1205 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called x1205.
+
endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index a876dd4..46178b5 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
+obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 9d3175c..01b0370 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -243,11 +243,10 @@
I2C_FUNC_I2C))
goto exit;
- if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct ds1337_data));
INIT_LIST_HEAD(&data->list);
/* The common I2C client data is placed right before the
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index 0936327..da488b7 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -167,7 +167,8 @@
static ulong new_time;
-DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time);
+static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet,
+ (ulong) & new_time);
int ds1374_set_rtc_time(ulong nowtime)
{
@@ -193,13 +194,11 @@
struct i2c_client *client;
int rc;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!client)
return -ENOMEM;
- memset(client, 0, sizeof(struct i2c_client));
strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
- client->flags = I2C_DF_NOTIFY;
client->addr = addr;
client->adapter = adap;
client->driver = &ds1374_driver;
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index d58403a..4baf573 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -88,8 +88,8 @@
dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX)
- if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX)
+ for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX)
+ if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX)
goto exit;
} else {
if (i2c_smbus_write_byte(client, slice << 5)) {
@@ -155,7 +155,7 @@
}
/* This function is called by i2c_probe */
-int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
+static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct eeprom_data *data;
@@ -171,11 +171,10 @@
| I2C_FUNC_SMBUS_BYTE))
goto exit;
- if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct eeprom_data));
new_client = &data->client;
memset(data->data, 0xff, EEPROM_SIZE);
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 8ee56d4..eaa4742 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -888,6 +888,7 @@
}
struct device_driver omap_otg_driver = {
+ .owner = THIS_MODULE,
.name = "omap_otg",
.bus = &platform_bus_type,
.probe = otg_probe,
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index 3f14528..3df309a 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -174,13 +174,11 @@
struct i2c_client *client;
int rc;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!client)
return -ENOMEM;
- memset(client, 0, sizeof(struct i2c_client));
strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
- client->flags = I2C_DF_NOTIFY;
client->addr = addr;
client->adapter = adap;
client->driver = &m41t00_driver;
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 9e1aeb6..b376a00 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -179,16 +179,14 @@
if (address & 1)
return 0;
- if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL)))
+ if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
return -ENOMEM;
- memset(data, 0, sizeof(struct max6875_data));
/* A fake client is created on the odd address */
- if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+ if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_kfree1;
}
- memset(fake_client, 0, sizeof(struct i2c_client));
/* Init real i2c_client */
real_client = &data->client;
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 225577f..59a9303 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -122,11 +122,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pca9539_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index 6525743..c323c2d 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -115,7 +115,7 @@
}
/* This function is called by i2c_probe */
-int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct pcf8574_data *data;
@@ -127,11 +127,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pcf8574_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index 80f1df9..ce420a6 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -166,7 +166,7 @@
}
/* This function is called by i2c_probe */
-int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct pcf8591_data *data;
@@ -178,11 +178,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pcf8591_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c
index 0b5385c..916cdc1 100644
--- a/drivers/i2c/chips/rtc8564.c
+++ b/drivers/i2c/chips/rtc8564.c
@@ -148,17 +148,16 @@
{addr, I2C_M_RD, 2, data}
};
- d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
+ d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
if (!d) {
ret = -ENOMEM;
goto done;
}
- memset(d, 0, sizeof(struct rtc8564_data));
new_client = &d->client;
strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE);
i2c_set_clientdata(new_client, d);
- new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY;
+ new_client->flags = I2C_CLIENT_ALLOW_USE;
new_client->addr = addr;
new_client->adapter = adap;
new_client->driver = &rtc8564_driver;
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 280e963..280dd7a 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -500,11 +500,10 @@
return 0;
}
- tps = kmalloc(sizeof *tps, GFP_KERNEL);
+ tps = kzalloc(sizeof *tps, GFP_KERNEL);
if (!tps)
return 0;
- memset(tps, 0, sizeof *tps);
init_MUTEX(&tps->lock);
INIT_WORK(&tps->work, tps65010_work, tps);
tps->irq = -1;
diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c
new file mode 100644
index 0000000..7da366c
--- /dev/null
+++ b/drivers/i2c/chips/x1205.c
@@ -0,0 +1,698 @@
+/*
+ * x1205.c - An i2c driver for the Xicor X1205 RTC
+ * Copyright 2004 Karen Spearel
+ * Copyright 2005 Alessandro Zummo
+ *
+ * please send all reports to:
+ * kas11 at tampabay dot rr dot com
+ * a dot zummo at towertech dot it
+ *
+ * based on the other drivers in this same directory.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/list.h>
+
+#include <linux/x1205.h>
+
+#define DRV_VERSION "0.9.9"
+
+/* Addresses to scan: none. This chip is located at
+ * 0x6f and uses a two bytes register addressing.
+ * Two bytes need to be written to read a single register,
+ * while most other chips just require one and take the second
+ * one as the data to be written. To prevent corrupting
+ * unknown chips, the user must explicitely set the probe parameter.
+ */
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD;
+I2C_CLIENT_MODULE_PARM(hctosys,
+ "Set the system time from the hardware clock upon initialization");
+
+/* offsets into CCR area */
+
+#define CCR_SEC 0
+#define CCR_MIN 1
+#define CCR_HOUR 2
+#define CCR_MDAY 3
+#define CCR_MONTH 4
+#define CCR_YEAR 5
+#define CCR_WDAY 6
+#define CCR_Y2K 7
+
+#define X1205_REG_SR 0x3F /* status register */
+#define X1205_REG_Y2K 0x37
+#define X1205_REG_DW 0x36
+#define X1205_REG_YR 0x35
+#define X1205_REG_MO 0x34
+#define X1205_REG_DT 0x33
+#define X1205_REG_HR 0x32
+#define X1205_REG_MN 0x31
+#define X1205_REG_SC 0x30
+#define X1205_REG_DTR 0x13
+#define X1205_REG_ATR 0x12
+#define X1205_REG_INT 0x11
+#define X1205_REG_0 0x10
+#define X1205_REG_Y2K1 0x0F
+#define X1205_REG_DWA1 0x0E
+#define X1205_REG_YRA1 0x0D
+#define X1205_REG_MOA1 0x0C
+#define X1205_REG_DTA1 0x0B
+#define X1205_REG_HRA1 0x0A
+#define X1205_REG_MNA1 0x09
+#define X1205_REG_SCA1 0x08
+#define X1205_REG_Y2K0 0x07
+#define X1205_REG_DWA0 0x06
+#define X1205_REG_YRA0 0x05
+#define X1205_REG_MOA0 0x04
+#define X1205_REG_DTA0 0x03
+#define X1205_REG_HRA0 0x02
+#define X1205_REG_MNA0 0x01
+#define X1205_REG_SCA0 0x00
+
+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
+
+#define X1205_SR_RTCF 0x01 /* Clock failure */
+#define X1205_SR_WEL 0x02 /* Write Enable Latch */
+#define X1205_SR_RWEL 0x04 /* Register Write Enable */
+
+#define X1205_DTR_DTR0 0x01
+#define X1205_DTR_DTR1 0x02
+#define X1205_DTR_DTR2 0x04
+
+#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+
+/* Prototypes */
+static int x1205_attach(struct i2c_adapter *adapter);
+static int x1205_detach(struct i2c_client *client);
+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
+static int x1205_command(struct i2c_client *client, unsigned int cmd,
+ void *arg);
+
+static struct i2c_driver x1205_driver = {
+ .owner = THIS_MODULE,
+ .name = "x1205",
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = &x1205_attach,
+ .detach_client = &x1205_detach,
+};
+
+struct x1205_data {
+ struct i2c_client client;
+ struct list_head list;
+ unsigned int epoch;
+};
+
+static const unsigned char days_in_mo[] =
+ { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+static LIST_HEAD(x1205_clients);
+
+/* Workaround until the I2C subsytem will allow to send
+ * commands to a specific client. This function will send the command
+ * to the first client.
+ */
+int x1205_do_command(unsigned int cmd, void *arg)
+{
+ struct list_head *walk;
+ struct list_head *tmp;
+ struct x1205_data *data;
+
+ list_for_each_safe(walk, tmp, &x1205_clients) {
+ data = list_entry(walk, struct x1205_data, list);
+ return x1205_command(&data->client, cmd, arg);
+ }
+
+ return -ENODEV;
+}
+
+#define is_leap(year) \
+ ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+/* make sure the rtc_time values are in bounds */
+static int x1205_validate_tm(struct rtc_time *tm)
+{
+ int year = tm->tm_year + 1900;
+
+ if ((tm->tm_year < 70) || (tm->tm_year > 255))
+ return -EINVAL;
+
+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
+ return -EINVAL;
+
+ if (tm->tm_mday > days_in_mo[tm->tm_mon]
+ + ((tm->tm_mon == 1) && is_leap(year)))
+ return -EINVAL;
+
+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * In the routines that deal directly with the x1205 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
+ * Epoch is initialized as 2000. Time is set to UTC.
+ */
+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
+ u8 reg_base)
+{
+ unsigned char dt_addr[2] = { 0, reg_base };
+ static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
+
+ unsigned char buf[8], sr;
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &sr }, /* read status */
+ { client->addr, 0, 2, dt_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 8, buf }, /* read date */
+ };
+
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ /* read status register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ /* check for battery failure */
+ if (sr & X1205_SR_RTCF) {
+ dev_warn(&client->dev,
+ "Clock had a power failure, you must set the date.\n");
+ return -EINVAL;
+ }
+
+ /* read date registers */
+ if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev,
+ "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
+ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
+ __FUNCTION__,
+ buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7]);
+
+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
+ data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
+ tm->tm_wday = buf[CCR_WDAY];
+
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ return 0;
+}
+
+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
+ int datetoo, u8 reg_base)
+{
+ int i, err, xfer;
+
+ unsigned char buf[8];
+
+ static const unsigned char wel[3] = { 0, X1205_REG_SR,
+ X1205_SR_WEL };
+
+ static const unsigned char rwel[3] = { 0, X1205_REG_SR,
+ X1205_SR_WEL | X1205_SR_RWEL };
+
+ static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
+
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ /* check if all values in the tm struct are correct */
+ if ((err = x1205_validate_tm(tm)) < 0)
+ return err;
+
+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
+
+ /* set hour and 24hr bit */
+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
+
+ /* should we also set the date? */
+ if (datetoo) {
+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
+
+ /* month, 0 - 11 */
+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
+
+ /* year, since 1900 */
+ buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
+ buf[CCR_WDAY] = tm->tm_wday & 0x07;
+ buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
+ }
+
+ /* this sequence is required to unlock the chip */
+ xfer = i2c_master_send(client, wel, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ xfer = i2c_master_send(client, rwel, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ /* write register's data */
+ for (i = 0; i < (datetoo ? 8 : 3); i++) {
+ unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
+
+ xfer = i2c_master_send(client, rdata, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev,
+ "%s: xfer=%d addr=%02x, data=%02x\n",
+ __FUNCTION__,
+ xfer, rdata[1], rdata[2]);
+ return -EIO;
+ }
+ };
+
+ /* disable further writes */
+ xfer = i2c_master_send(client, diswe, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
+{
+ unsigned char dtr;
+ static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
+ };
+
+ /* read dtr register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
+
+ *trim = 0;
+
+ if (dtr & X1205_DTR_DTR0)
+ *trim += 20;
+
+ if (dtr & X1205_DTR_DTR1)
+ *trim += 10;
+
+ if (dtr & X1205_DTR_DTR2)
+ *trim = -*trim;
+
+ return 0;
+}
+
+static int x1205_get_atrim(struct i2c_client *client, int *trim)
+{
+ s8 atr;
+ static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, atr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
+ };
+
+ /* read atr register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
+
+ /* atr is a two's complement value on 6 bits,
+ * perform sign extension. The formula is
+ * Catr = (atr * 0.25pF) + 11.00pF.
+ */
+ if (atr & 0x20)
+ atr |= 0xC0;
+
+ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
+
+ *trim = (atr * 250) + 11000;
+
+ dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
+
+ return 0;
+}
+
+static int x1205_hctosys(struct i2c_client *client)
+{
+ int err;
+
+ struct rtc_time tm;
+ struct timespec tv;
+
+ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
+
+ if (err) {
+ dev_err(&client->dev,
+ "Unable to set the system clock\n");
+ return err;
+ }
+
+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
+ * whether it stores the most close value or the value with partial
+ * seconds truncated. However, it is important that we use it to store
+ * the truncated value. This is because otherwise it is necessary,
+ * in an rtc sync function, to read both xtime.tv_sec and
+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
+ * of >32bits is not possible. So storing the most close value would
+ * slow down the sync API. So here we have the truncated value and
+ * the best guess is to add 0.5s.
+ */
+
+ tv.tv_nsec = NSEC_PER_SEC >> 1;
+
+ /* WARNING: this is not the C library 'mktime' call, it is a built in
+ * inline function from include/linux/time.h. It expects (requires)
+ * the month to be in the range 1-12
+ */
+
+ tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
+ tm.tm_mday, tm.tm_hour,
+ tm.tm_min, tm.tm_sec);
+
+ do_settimeofday(&tv);
+
+ dev_info(&client->dev,
+ "setting the system clock to %d-%d-%d %d:%d:%d\n",
+ tm.tm_year + 1900, tm.tm_mon + 1,
+ tm.tm_mday, tm.tm_hour, tm.tm_min,
+ tm.tm_sec);
+
+ return 0;
+}
+
+struct x1205_limit
+{
+ unsigned char reg;
+ unsigned char mask;
+ unsigned char min;
+ unsigned char max;
+};
+
+static int x1205_validate_client(struct i2c_client *client)
+{
+ int i, xfer;
+
+ /* Probe array. We will read the register at the specified
+ * address and check if the given bits are zero.
+ */
+ static const unsigned char probe_zero_pattern[] = {
+ /* register, mask */
+ X1205_REG_SR, 0x18,
+ X1205_REG_DTR, 0xF8,
+ X1205_REG_ATR, 0xC0,
+ X1205_REG_INT, 0x18,
+ X1205_REG_0, 0xFF,
+ };
+
+ static const struct x1205_limit probe_limits_pattern[] = {
+ /* register, mask, min, max */
+ { X1205_REG_Y2K, 0xFF, 19, 20 },
+ { X1205_REG_DW, 0xFF, 0, 6 },
+ { X1205_REG_YR, 0xFF, 0, 99 },
+ { X1205_REG_MO, 0xFF, 0, 12 },
+ { X1205_REG_DT, 0xFF, 0, 31 },
+ { X1205_REG_HR, 0x7F, 0, 23 },
+ { X1205_REG_MN, 0xFF, 0, 59 },
+ { X1205_REG_SC, 0xFF, 0, 59 },
+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
+ };
+
+ /* check that registers have bits a 0 where expected */
+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
+ unsigned char buf;
+
+ unsigned char addr[2] = { 0, probe_zero_pattern[i] };
+
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 2, addr },
+ { client->addr, I2C_M_RD, 1, &buf },
+ };
+
+ xfer = i2c_transfer(client->adapter, msgs, 2);
+ if (xfer != 2) {
+ dev_err(&client->adapter->dev,
+ "%s: could not read register %x\n",
+ __FUNCTION__, addr[1]);
+
+ return -EIO;
+ }
+
+ if ((buf & probe_zero_pattern[i+1]) != 0) {
+ dev_err(&client->adapter->dev,
+ "%s: register=%02x, zero pattern=%d, value=%x\n",
+ __FUNCTION__, addr[1], i, buf);
+
+ return -ENODEV;
+ }
+ }
+
+ /* check limits (only registers with bcd values) */
+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
+ unsigned char reg, value;
+
+ unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
+
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 2, addr },
+ { client->addr, I2C_M_RD, 1, ® },
+ };
+
+ xfer = i2c_transfer(client->adapter, msgs, 2);
+
+ if (xfer != 2) {
+ dev_err(&client->adapter->dev,
+ "%s: could not read register %x\n",
+ __FUNCTION__, addr[1]);
+
+ return -EIO;
+ }
+
+ value = BCD2BIN(reg & probe_limits_pattern[i].mask);
+
+ if (value > probe_limits_pattern[i].max ||
+ value < probe_limits_pattern[i].min) {
+ dev_dbg(&client->adapter->dev,
+ "%s: register=%x, lim pattern=%d, value=%d\n",
+ __FUNCTION__, addr[1], i, value);
+
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+static int x1205_attach(struct i2c_adapter *adapter)
+{
+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+ return i2c_probe(adapter, &addr_data, x1205_probe);
+}
+
+int x1205_direct_attach(int adapter_id,
+ struct i2c_client_address_data *address_data)
+{
+ int err;
+ struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
+
+ if (adapter) {
+ err = i2c_probe(adapter,
+ address_data, x1205_probe);
+
+ i2c_put_adapter(adapter);
+
+ return err;
+ }
+
+ return -ENODEV;
+}
+
+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct x1205_data *data;
+
+ int err = 0;
+
+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ /* Initialize our structures */
+ data->epoch = 2000;
+
+ client = &data->client;
+ client->addr = address;
+ client->driver = &x1205_driver;
+ client->adapter = adapter;
+
+ strlcpy(client->name, "x1205", I2C_NAME_SIZE);
+
+ i2c_set_clientdata(client, data);
+
+ /* Verify the chip is really an X1205 */
+ if (kind < 0) {
+ if (x1205_validate_client(client) < 0) {
+ err = -ENODEV;
+ goto exit_kfree;
+ }
+ }
+
+ /* Inform the i2c layer */
+ if ((err = i2c_attach_client(client)))
+ goto exit_kfree;
+
+ list_add(&data->list, &x1205_clients);
+
+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+ /* If requested, set the system time */
+ if (hctosys)
+ x1205_hctosys(client);
+
+ return 0;
+
+exit_kfree:
+ kfree(data);
+
+exit:
+ return err;
+}
+
+static int x1205_detach(struct i2c_client *client)
+{
+ int err;
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ list_del(&data->list);
+
+ kfree(data);
+
+ return 0;
+}
+
+static int x1205_command(struct i2c_client *client, unsigned int cmd,
+ void *param)
+{
+ if (param == NULL)
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+
+ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
+
+ switch (cmd) {
+ case X1205_CMD_GETDATETIME:
+ return x1205_get_datetime(client, param, X1205_CCR_BASE);
+
+ case X1205_CMD_SETTIME:
+ return x1205_set_datetime(client, param, 0,
+ X1205_CCR_BASE);
+
+ case X1205_CMD_SETDATETIME:
+ return x1205_set_datetime(client, param, 1,
+ X1205_CCR_BASE);
+
+ case X1205_CMD_GETALARM:
+ return x1205_get_datetime(client, param, X1205_ALM0_BASE);
+
+ case X1205_CMD_SETALARM:
+ return x1205_set_datetime(client, param, 1,
+ X1205_ALM0_BASE);
+
+ case X1205_CMD_GETDTRIM:
+ return x1205_get_dtrim(client, param);
+
+ case X1205_CMD_GETATRIM:
+ return x1205_get_atrim(client, param);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int __init x1205_init(void)
+{
+ return i2c_add_driver(&x1205_driver);
+}
+
+static void __exit x1205_exit(void)
+{
+ i2c_del_driver(&x1205_driver);
+}
+
+MODULE_AUTHOR(
+ "Karen Spearel <kas11@tampabay.rr.com>, "
+ "Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("Xicor X1205 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+EXPORT_SYMBOL_GPL(x1205_do_command);
+EXPORT_SYMBOL_GPL(x1205_direct_attach);
+
+module_init(x1205_init);
+module_exit(x1205_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index dda472e..02e335a 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -19,7 +19,8 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
- SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> */
+ SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
+ Jean Delvare <khali@linux-fr.org> */
#include <linux/module.h>
#include <linux/kernel.h>
@@ -48,7 +49,7 @@
int rc = 0;
if (dev->driver && dev->driver->suspend)
- rc = dev->driver->suspend(dev,state,0);
+ rc = dev->driver->suspend(dev, state);
return rc;
}
@@ -57,7 +58,7 @@
int rc = 0;
if (dev->driver && dev->driver->resume)
- rc = dev->driver->resume(dev,0);
+ rc = dev->driver->resume(dev);
return rc;
}
@@ -85,6 +86,7 @@
}
struct device_driver i2c_adapter_driver = {
+ .owner = THIS_MODULE,
.name = "i2c_adapter",
.bus = &i2c_bus_type,
.probe = i2c_device_probe,
@@ -98,6 +100,7 @@
}
struct class i2c_adapter_class = {
+ .owner = THIS_MODULE,
.name = "i2c-adapter",
.release = &i2c_adapter_class_dev_release,
};
@@ -291,6 +294,7 @@
down(&core_lists);
/* add the driver to the list of i2c drivers in the driver core */
+ driver->driver.owner = driver->owner;
driver->driver.name = driver->name;
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_device_probe;
@@ -706,10 +710,6 @@
int i, err;
int adap_id = i2c_adapter_id(adapter);
- /* Forget it if we can't probe using SMBUS_QUICK */
- if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK))
- return -1;
-
/* Force entries are done first, and are not affected by ignore
entries */
if (address_data->forces) {
@@ -736,6 +736,17 @@
}
}
+ /* Stop here if we can't use SMBUS_QUICK */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+ if (address_data->probe[0] == I2C_CLIENT_END
+ && address_data->normal_i2c[0] == I2C_CLIENT_END)
+ return 0;
+
+ dev_warn(&adapter->dev, "SMBus Quick command not supported, "
+ "can't probe for chips\n");
+ return -1;
+ }
+
/* Probe entries are done second, and are not affected by ignore
entries either */
for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
@@ -820,101 +831,44 @@
return (u8)(data >> 8);
}
-/* CRC over count bytes in the first array plus the bytes in the rest
- array if it is non-null. rest[0] is the (length of rest) - 1
- and is included. */
-static u8 i2c_smbus_partial_pec(u8 crc, int count, u8 *first, u8 *rest)
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
{
int i;
for(i = 0; i < count; i++)
- crc = crc8((crc ^ first[i]) << 8);
- if(rest != NULL)
- for(i = 0; i <= rest[0]; i++)
- crc = crc8((crc ^ rest[i]) << 8);
+ crc = crc8((crc ^ p[i]) << 8);
return crc;
}
-static u8 i2c_smbus_pec(int count, u8 *first, u8 *rest)
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
{
- return i2c_smbus_partial_pec(0, count, first, rest);
+ /* The address will be sent first */
+ u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD);
+ pec = i2c_smbus_pec(pec, &addr, 1);
+
+ /* The data buffer follows */
+ return i2c_smbus_pec(pec, msg->buf, msg->len);
}
-/* Returns new "size" (transaction type)
- Note that we convert byte to byte_data and byte_data to word_data
- rather than invent new xxx_PEC transactions. */
-static int i2c_smbus_add_pec(u16 addr, u8 command, int size,
- union i2c_smbus_data *data)
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
{
- u8 buf[3];
-
- buf[0] = addr << 1;
- buf[1] = command;
- switch(size) {
- case I2C_SMBUS_BYTE:
- data->byte = i2c_smbus_pec(2, buf, NULL);
- size = I2C_SMBUS_BYTE_DATA;
- break;
- case I2C_SMBUS_BYTE_DATA:
- buf[2] = data->byte;
- data->word = buf[2] ||
- (i2c_smbus_pec(3, buf, NULL) << 8);
- size = I2C_SMBUS_WORD_DATA;
- break;
- case I2C_SMBUS_WORD_DATA:
- /* unsupported */
- break;
- case I2C_SMBUS_BLOCK_DATA:
- data->block[data->block[0] + 1] =
- i2c_smbus_pec(2, buf, data->block);
- size = I2C_SMBUS_BLOCK_DATA_PEC;
- break;
- }
- return size;
+ msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+ msg->len++;
}
-static int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial,
- union i2c_smbus_data *data)
+/* Return <0 on CRC error
+ If there was a write before this read (most cases) we need to take the
+ partial CRC from the write part into account.
+ Note that this function does modify the message (we need to decrease the
+ message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
{
- u8 buf[3], rpec, cpec;
+ u8 rpec = msg->buf[--msg->len];
+ cpec = i2c_smbus_msg_pec(cpec, msg);
- buf[1] = command;
- switch(size) {
- case I2C_SMBUS_BYTE_DATA:
- buf[0] = (addr << 1) | 1;
- cpec = i2c_smbus_pec(2, buf, NULL);
- rpec = data->byte;
- break;
- case I2C_SMBUS_WORD_DATA:
- buf[0] = (addr << 1) | 1;
- buf[2] = data->word & 0xff;
- cpec = i2c_smbus_pec(3, buf, NULL);
- rpec = data->word >> 8;
- break;
- case I2C_SMBUS_WORD_DATA_PEC:
- /* unsupported */
- cpec = rpec = 0;
- break;
- case I2C_SMBUS_PROC_CALL_PEC:
- /* unsupported */
- cpec = rpec = 0;
- break;
- case I2C_SMBUS_BLOCK_DATA_PEC:
- buf[0] = (addr << 1);
- buf[2] = (addr << 1) | 1;
- cpec = i2c_smbus_pec(3, buf, data->block);
- rpec = data->block[data->block[0] + 1];
- break;
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- buf[0] = (addr << 1) | 1;
- rpec = i2c_smbus_partial_pec(partial, 1,
- buf, data->block);
- cpec = data->block[data->block[0] + 1];
- break;
- default:
- cpec = rpec = 0;
- break;
- }
if (rpec != cpec) {
pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
rpec, cpec);
@@ -941,9 +895,8 @@
s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
{
- union i2c_smbus_data data; /* only for PEC */
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
- I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data);
+ I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
}
s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
@@ -1026,13 +979,14 @@
need to use only one message; when reading, we need two. We initialize
most things with sane defaults, to keep the code below somewhat
simpler. */
- unsigned char msgbuf0[34];
- unsigned char msgbuf1[34];
+ unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+ unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
int num = read_write == I2C_SMBUS_READ?2:1;
struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
{ addr, flags | I2C_M_RD, 0, msgbuf1 }
};
int i;
+ u8 partial_pec = 0;
msgbuf0[0] = command;
switch(size) {
@@ -1075,7 +1029,6 @@
msgbuf0[2] = (data->word >> 8) & 0xff;
break;
case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_DATA_PEC:
if (read_write == I2C_SMBUS_READ) {
dev_err(&adapter->dev, "Block read not supported "
"under I2C emulation!\n");
@@ -1088,23 +1041,20 @@
data->block[0]);
return -1;
}
- if(size == I2C_SMBUS_BLOCK_DATA_PEC)
- (msg[0].len)++;
- for (i = 1; i <= msg[0].len; i++)
+ for (i = 1; i < msg[0].len; i++)
msgbuf0[i] = data->block[i-1];
}
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
dev_dbg(&adapter->dev, "Block process call not supported "
"under I2C emulation!\n");
return -1;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
- msg[1].len = I2C_SMBUS_I2C_BLOCK_MAX;
+ msg[1].len = I2C_SMBUS_BLOCK_MAX;
} else {
msg[0].len = data->block[0] + 1;
- if (msg[0].len > I2C_SMBUS_I2C_BLOCK_MAX + 1) {
+ if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with "
"invalid block write size (%d)\n",
data->block[0]);
@@ -1120,9 +1070,30 @@
return -1;
}
+ i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA);
+ if (i) {
+ /* Compute PEC if first message is a write */
+ if (!(msg[0].flags & I2C_M_RD)) {
+ if (num == 1) /* Write only */
+ i2c_smbus_add_pec(&msg[0]);
+ else /* Write followed by read */
+ partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+ }
+ /* Ask for PEC if last message is a read */
+ if (msg[num-1].flags & I2C_M_RD)
+ msg[num-1].len++;
+ }
+
if (i2c_transfer(adapter, msg, num) < 0)
return -1;
+ /* Check PEC if last message is a read */
+ if (i && (msg[num-1].flags & I2C_M_RD)) {
+ if (i2c_smbus_check_pec(partial_pec, &msg[num-1]) < 0)
+ return -1;
+ }
+
if (read_write == I2C_SMBUS_READ)
switch(size) {
case I2C_SMBUS_BYTE:
@@ -1137,8 +1108,8 @@
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
/* fixed at 32 for now */
- data->block[0] = I2C_SMBUS_I2C_BLOCK_MAX;
- for (i = 0; i < I2C_SMBUS_I2C_BLOCK_MAX; i++)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
data->block[i+1] = msgbuf1[i];
break;
}
@@ -1151,28 +1122,8 @@
union i2c_smbus_data * data)
{
s32 res;
- int swpec = 0;
- u8 partial = 0;
flags &= I2C_M_TEN | I2C_CLIENT_PEC;
- if((flags & I2C_CLIENT_PEC) &&
- !(i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HWPEC_CALC))) {
- swpec = 1;
- if(read_write == I2C_SMBUS_READ &&
- size == I2C_SMBUS_BLOCK_DATA)
- size = I2C_SMBUS_BLOCK_DATA_PEC;
- else if(size == I2C_SMBUS_PROC_CALL)
- size = I2C_SMBUS_PROC_CALL_PEC;
- else if(size == I2C_SMBUS_BLOCK_PROC_CALL) {
- i2c_smbus_add_pec(addr, command,
- I2C_SMBUS_BLOCK_DATA, data);
- partial = data->block[data->block[0] + 1];
- size = I2C_SMBUS_BLOCK_PROC_CALL_PEC;
- } else if(read_write == I2C_SMBUS_WRITE &&
- size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- size = i2c_smbus_add_pec(addr, command, size, data);
- }
if (adapter->algo->smbus_xfer) {
down(&adapter->bus_lock);
@@ -1183,13 +1134,6 @@
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
command,size,data);
- if(res >= 0 && swpec &&
- size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA &&
- (read_write == I2C_SMBUS_READ || size == I2C_SMBUS_PROC_CALL_PEC ||
- size == I2C_SMBUS_BLOCK_PROC_CALL_PEC)) {
- if(i2c_smbus_check_pec(addr, command, size, partial, data))
- return -1;
- }
return res;
}
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index aa7a4fa..ea14c8f 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -26,15 +26,11 @@
/* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
-/* The devfs code is contributed by Philipp Matthias Hahn
- <pmhahn@titan.lahn.de> */
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
@@ -80,10 +76,9 @@
{
struct i2c_dev *i2c_dev;
- i2c_dev = kmalloc(sizeof(*i2c_dev), GFP_KERNEL);
+ i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL);
if (!i2c_dev)
return ERR_PTR(-ENOMEM);
- memset(i2c_dev, 0x00, sizeof(*i2c_dev));
spin_lock(&i2c_dev_array_lock);
if (i2c_dev_array[adap->nr]) {
@@ -177,8 +172,8 @@
int i,datasize,res;
unsigned long funcs;
- dev_dbg(&client->adapter->dev, "i2c-%d ioctl, cmd: 0x%x, arg: %lx.\n",
- iminor(inode),cmd, arg);
+ dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n",
+ cmd, arg);
switch ( cmd ) {
case I2C_SLAVE:
@@ -432,8 +427,6 @@
if (IS_ERR(i2c_dev))
return PTR_ERR(i2c_dev);
- devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor),
- S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor);
pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
adap->name, i2c_dev->minor);
@@ -466,7 +459,6 @@
return -ENODEV;
init_completion(&i2c_dev->released);
- devfs_remove("i2c/%d", i2c_dev->minor);
return_i2c_dev(i2c_dev);
class_device_unregister(&i2c_dev->class_dev);
wait_for_completion(&i2c_dev->released);
@@ -522,8 +514,6 @@
if (res)
goto out_unreg_class;
- devfs_mk_dir("i2c");
-
return 0;
out_unreg_class:
@@ -539,7 +529,6 @@
{
i2c_del_driver(&i2cdev_driver);
class_unregister(&i2c_dev_class);
- devfs_remove("i2c");
unregister_chrdev(I2C_MAJOR,"i2c");
}
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1cadd2c..a737886 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -778,6 +778,35 @@
This option enables the use of the sleep LED as a hard drive
activity LED.
+config BLK_DEV_IDE_AU1XXX
+ bool "IDE for AMD Alchemy Au1200"
+ depends on SOC_AU1200
+choice
+ prompt "IDE Mode for AMD Alchemy Au1200"
+ default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+
+config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
+
+config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
+ depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+endchoice
+
+config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ bool "Enable burstable Mode on DbDMA"
+ default false
+ depends BLK_DEV_IDE_AU1XXX
+ help
+ This option enable the burstable Flag on DbDMA controller
+ (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY").
+
+config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
+ int "Maximum transfer size (KB) per request (up to 128)"
+ default "128"
+ depends BLK_DEV_IDE_AU1XXX
+
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
@@ -1013,7 +1042,7 @@
endif
config BLK_DEV_IDEDMA
- def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS
+ def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
config IDEDMA_IVB
bool "IGNORE word93 Validation BITS"
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 74af7e0..8b9d855 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -2211,13 +2211,12 @@
if (toc == NULL) {
/* Try to allocate space. */
- toc = (struct atapi_toc *) kmalloc (sizeof (struct atapi_toc),
- GFP_KERNEL);
- info->toc = toc;
+ toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
if (toc == NULL) {
printk (KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name);
return -ENOMEM;
}
+ info->toc = toc;
}
/* Check to see if the existing data is still valid.
@@ -2240,7 +2239,8 @@
/* First read just the header, so we know how long the TOC is. */
stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
sizeof(struct atapi_toc_header), sense);
- if (stat) return stat;
+ if (stat)
+ return stat;
#if ! STANDARD_ATAPI
if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
@@ -2324,7 +2324,8 @@
/* Read the multisession information. */
stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
sizeof(ms_tmp), sense);
- if (stat) return stat;
+ if (stat)
+ return stat;
toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
} else {
@@ -2460,7 +2461,7 @@
struct packet_command *cgc)
{
struct request req;
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
if (cgc->timeout <= 0)
cgc->timeout = ATAPI_WAIT_PC;
@@ -2537,7 +2538,7 @@
unsigned int cmd, void *arg)
{
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
struct cdrom_info *info = drive->driver_data;
int stat;
@@ -2548,7 +2549,7 @@
*/
case CDROMPLAYTRKIND: {
unsigned long lba_start, lba_end;
- struct cdrom_ti *ti = (struct cdrom_ti *)arg;
+ struct cdrom_ti *ti = arg;
struct atapi_toc_entry *first_toc, *last_toc;
stat = cdrom_get_toc_entry(drive, ti->cdti_trk0, &first_toc);
@@ -2571,12 +2572,13 @@
}
case CDROMREADTOCHDR: {
- struct cdrom_tochdr *tochdr = (struct cdrom_tochdr *) arg;
+ struct cdrom_tochdr *tochdr = arg;
struct atapi_toc *toc;
/* Make sure our saved TOC is valid. */
stat = cdrom_read_toc(drive, NULL);
- if (stat) return stat;
+ if (stat)
+ return stat;
toc = info->toc;
tochdr->cdth_trk0 = toc->hdr.first_track;
@@ -2586,11 +2588,12 @@
}
case CDROMREADTOCENTRY: {
- struct cdrom_tocentry *tocentry = (struct cdrom_tocentry*) arg;
+ struct cdrom_tocentry *tocentry = arg;
struct atapi_toc_entry *toce;
stat = cdrom_get_toc_entry(drive, tocentry->cdte_track, &toce);
- if (stat) return stat;
+ if (stat)
+ return stat;
tocentry->cdte_ctrl = toce->control;
tocentry->cdte_adr = toce->adr;
@@ -2613,7 +2616,7 @@
static
int ide_cdrom_reset (struct cdrom_device_info *cdi)
{
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
struct request_sense sense;
struct request req;
int ret;
@@ -2636,12 +2639,13 @@
static
int ide_cdrom_tray_move (struct cdrom_device_info *cdi, int position)
{
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
struct request_sense sense;
if (position) {
int stat = cdrom_lockdoor(drive, 0, &sense);
- if (stat) return stat;
+ if (stat)
+ return stat;
}
return cdrom_eject(drive, !position, &sense);
@@ -2650,7 +2654,7 @@
static
int ide_cdrom_lock_door (struct cdrom_device_info *cdi, int lock)
{
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
return cdrom_lockdoor(drive, lock, NULL);
}
@@ -2700,7 +2704,7 @@
static
int ide_cdrom_select_speed (struct cdrom_device_info *cdi, int speed)
{
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
struct request_sense sense;
struct atapi_capabilities_page cap;
int stat;
@@ -2723,7 +2727,7 @@
static
int ide_cdrom_drive_status (struct cdrom_device_info *cdi, int slot_nr)
{
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
struct media_event_desc med;
struct request_sense sense;
int stat;
@@ -2769,7 +2773,7 @@
struct cdrom_multisession *ms_info)
{
struct atapi_toc *toc;
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
struct cdrom_info *info = drive->driver_data;
struct request_sense sense;
int ret;
@@ -2791,7 +2795,7 @@
{
int stat;
char mcnbuf[24];
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
/* get MCN */
if ((stat = cdrom_read_subchannel(drive, 2, mcnbuf, sizeof (mcnbuf), NULL)))
@@ -2815,7 +2819,7 @@
int ide_cdrom_check_media_change_real (struct cdrom_device_info *cdi,
int slot_nr)
{
- ide_drive_t *drive = (ide_drive_t*) cdi->handle;
+ ide_drive_t *drive = cdi->handle;
int retval;
if (slot_nr == CDSL_CURRENT) {
@@ -2886,7 +2890,7 @@
devinfo->mask = 0;
devinfo->speed = CDROM_STATE_FLAGS(drive)->current_speed;
devinfo->capacity = nslots;
- devinfo->handle = (void *) drive;
+ devinfo->handle = drive;
strcpy(devinfo->name, drive->name);
/* set capability mask to match the probe. */
@@ -2942,7 +2946,7 @@
* registered with the Uniform layer yet, it can't do this.
* Same goes for cdi->ops.
*/
- cdi->handle = (ide_drive_t *) drive;
+ cdi->handle = drive;
cdi->ops = &ide_cdrom_dops;
if (ide_cdrom_get_capabilities(drive, &cap))
@@ -3254,6 +3258,7 @@
return 0;
}
+#ifdef CONFIG_PROC_FS
static
sector_t ide_cdrom_capacity (ide_drive_t *drive)
{
@@ -3264,6 +3269,7 @@
return capacity * sectors_per_frame;
}
+#endif
static int ide_cd_remove(struct device *dev)
{
@@ -3309,7 +3315,7 @@
static int proc_idecd_read_capacity
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
- ide_drive_t*drive = (ide_drive_t *)data;
+ ide_drive_t *drive = data;
int len;
len = sprintf(page,"%llu\n", (long long)ide_cdrom_capacity(drive));
@@ -3449,7 +3455,7 @@
printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi emulation.\n", drive->name);
goto failed;
}
- info = (struct cdrom_info *) kmalloc (sizeof (struct cdrom_info), GFP_KERNEL);
+ info = kmalloc(sizeof(struct cdrom_info), GFP_KERNEL);
if (info == NULL) {
printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", drive->name);
goto failed;
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 4063d2c..84665e2 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -64,6 +64,7 @@
case ide_cy82c693: name = "cy82c693"; break;
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
+ case ide_au1xxx: name = "au1xxx"; break;
default: name = "(unknown)"; break;
}
len = sprintf(page, "%s\n", name);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index ee38e6b..47f2b83 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1013,6 +1013,8 @@
static DECLARE_MUTEX(idetape_ref_sem);
+static struct class *idetape_sysfs_class;
+
#define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref)
#define ide_tape_g(disk) \
@@ -4704,6 +4706,10 @@
drive->dsc_overlap = 0;
drive->driver_data = NULL;
+ class_device_destroy(idetape_sysfs_class,
+ MKDEV(IDETAPE_MAJOR, tape->minor));
+ class_device_destroy(idetape_sysfs_class,
+ MKDEV(IDETAPE_MAJOR, tape->minor + 128));
devfs_remove("%s/mt", drive->devfs_name);
devfs_remove("%s/mtn", drive->devfs_name);
devfs_unregister_tape(g->number);
@@ -4878,6 +4884,11 @@
idetape_setup(drive, tape, minor);
+ class_device_create(idetape_sysfs_class, NULL,
+ MKDEV(IDETAPE_MAJOR, minor), dev, "%s", tape->name);
+ class_device_create(idetape_sysfs_class, NULL,
+ MKDEV(IDETAPE_MAJOR, minor + 128), dev, "n%s", tape->name);
+
devfs_mk_cdev(MKDEV(HWIF(drive)->major, minor),
S_IFCHR | S_IRUGO | S_IWUGO,
"%s/mt", drive->devfs_name);
@@ -4903,6 +4914,7 @@
static void __exit idetape_exit (void)
{
driver_unregister(&idetape_driver.gen_driver);
+ class_destroy(idetape_sysfs_class);
unregister_chrdev(IDETAPE_MAJOR, "ht");
}
@@ -4911,11 +4923,33 @@
*/
static int idetape_init (void)
{
+ int error = 1;
+ idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape");
+ if (IS_ERR(idetape_sysfs_class)) {
+ idetape_sysfs_class = NULL;
+ printk(KERN_ERR "Unable to create sysfs class for ide tapes\n");
+ error = -EBUSY;
+ goto out;
+ }
+
if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
printk(KERN_ERR "ide-tape: Failed to register character device interface\n");
- return -EBUSY;
+ error = -EBUSY;
+ goto out_free_class;
}
- return driver_register(&idetape_driver.gen_driver);
+
+ error = driver_register(&idetape_driver.gen_driver);
+ if (error)
+ goto out_free_driver;
+
+ return 0;
+
+out_free_driver:
+ driver_unregister(&idetape_driver.gen_driver);
+out_free_class:
+ class_destroy(idetape_sysfs_class);
+out:
+ return error;
}
module_init(idetape_init);
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
new file mode 100644
index 0000000..2b6327c
--- /dev/null
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -0,0 +1,1250 @@
+/*
+ * linux/drivers/ide/mips/au1xxx-ide.c version 01.30.00 Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ * Interface and Linux Device Driver" Application Note.
+ */
+#undef REALLY_SLOW_IO /* most systems can safely undef this */
+
+#include <linux/config.h> /* for CONFIG_BLK_DEV_IDEPCI */
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/hdreg.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/sysdev.h>
+
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+#if CONFIG_PM
+#include <asm/mach-au1x00/au1xxx_pm.h>
+#endif
+
+#include <asm/mach-au1x00/au1xxx_ide.h>
+
+#define DRV_NAME "au1200-ide"
+#define DRV_VERSION "1.0"
+#define DRV_AUTHOR "AMD PCS / Pete Popov <ppopov@embeddedalley.com>"
+#define DRV_DESC "Au1200 IDE"
+
+static _auide_hwif auide_hwif;
+static spinlock_t ide_tune_drive_spin_lock = SPIN_LOCK_UNLOCKED;
+static spinlock_t ide_tune_chipset_spin_lock = SPIN_LOCK_UNLOCKED;
+static int dbdma_init_done = 0;
+
+/*
+ * local I/O functions
+ */
+u8 auide_inb(unsigned long port)
+{
+ return (au_readb(port));
+}
+
+u16 auide_inw(unsigned long port)
+{
+ return (au_readw(port));
+}
+
+u32 auide_inl(unsigned long port)
+{
+ return (au_readl(port));
+}
+
+void auide_insw(unsigned long port, void *addr, u32 count)
+{
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+
+ _auide_hwif *ahwif = &auide_hwif;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+
+ if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1,
+ DDMA_FLAGS_NOIE)) {
+ printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
+ return;
+ }
+ ctp = *((chan_tab_t **)ahwif->rx_chan);
+ dp = ctp->cur_ptr;
+ while (dp->dscr_cmd0 & DSCR_CMD0_V)
+ ;
+ ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
+#else
+ while (count--)
+ {
+ *(u16 *)addr = au_readw(port);
+ addr +=2 ;
+ }
+#endif
+}
+
+void auide_insl(unsigned long port, void *addr, u32 count)
+{
+ while (count--)
+ {
+ *(u32 *)addr = au_readl(port);
+ /* NOTE: For IDE interfaces over PCMCIA,
+ * 32-bit access does not work
+ */
+ addr += 4;
+ }
+}
+
+void auide_outb(u8 addr, unsigned long port)
+{
+ return (au_writeb(addr, port));
+}
+
+void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port)
+{
+ return (au_writeb(addr, port));
+}
+
+void auide_outw(u16 addr, unsigned long port)
+{
+ return (au_writew(addr, port));
+}
+
+void auide_outl(u32 addr, unsigned long port)
+{
+ return (au_writel(addr, port));
+}
+
+void auide_outsw(unsigned long port, void *addr, u32 count)
+{
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+ _auide_hwif *ahwif = &auide_hwif;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+
+ if(!put_source_flags(ahwif->tx_chan, (void*)addr,
+ count << 1, DDMA_FLAGS_NOIE)) {
+ printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
+ return;
+ }
+ ctp = *((chan_tab_t **)ahwif->tx_chan);
+ dp = ctp->cur_ptr;
+ while (dp->dscr_cmd0 & DSCR_CMD0_V)
+ ;
+ ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
+#else
+ while (count--)
+ {
+ au_writew(*(u16 *)addr, port);
+ addr += 2;
+ }
+#endif
+}
+
+void auide_outsl(unsigned long port, void *addr, u32 count)
+{
+ while (count--)
+ {
+ au_writel(*(u32 *)addr, port);
+ /* NOTE: For IDE interfaces over PCMCIA,
+ * 32-bit access does not work
+ */
+ addr += 4;
+ }
+}
+
+static void auide_tune_drive(ide_drive_t *drive, byte pio)
+{
+ int mem_sttime;
+ int mem_stcfg;
+ unsigned long flags;
+ u8 speed;
+
+ /* get the best pio mode for the drive */
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+
+ printk("%s: setting Au1XXX IDE to PIO mode%d\n",
+ drive->name, pio);
+
+ spin_lock_irqsave(&ide_tune_drive_spin_lock, flags);
+
+ mem_sttime = 0;
+ mem_stcfg = au_readl(MEM_STCFG2);
+
+ /* set pio mode! */
+ switch(pio) {
+ case 0:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO0_TWCS
+ | SBC_IDE_PIO0_TCSH
+ | SBC_IDE_PIO0_TCSOFF
+ | SBC_IDE_PIO0_TWP
+ | SBC_IDE_PIO0_TCSW
+ | SBC_IDE_PIO0_TPM
+ | SBC_IDE_PIO0_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+ break;
+
+ case 1:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO1_TWCS
+ | SBC_IDE_PIO1_TCSH
+ | SBC_IDE_PIO1_TCSOFF
+ | SBC_IDE_PIO1_TWP
+ | SBC_IDE_PIO1_TCSW
+ | SBC_IDE_PIO1_TPM
+ | SBC_IDE_PIO1_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
+ break;
+
+ case 2:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO2_TWCS
+ | SBC_IDE_PIO2_TCSH
+ | SBC_IDE_PIO2_TCSOFF
+ | SBC_IDE_PIO2_TWP
+ | SBC_IDE_PIO2_TCSW
+ | SBC_IDE_PIO2_TPM
+ | SBC_IDE_PIO2_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
+ break;
+
+ case 3:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO3_TWCS
+ | SBC_IDE_PIO3_TCSH
+ | SBC_IDE_PIO3_TCSOFF
+ | SBC_IDE_PIO3_TWP
+ | SBC_IDE_PIO3_TCSW
+ | SBC_IDE_PIO3_TPM
+ | SBC_IDE_PIO3_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;
+
+ break;
+
+ case 4:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_PIO4_TWCS
+ | SBC_IDE_PIO4_TCSH
+ | SBC_IDE_PIO4_TCSOFF
+ | SBC_IDE_PIO4_TWP
+ | SBC_IDE_PIO4_TCSW
+ | SBC_IDE_PIO4_TPM
+ | SBC_IDE_PIO4_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
+ break;
+ }
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+
+ spin_unlock_irqrestore(&ide_tune_drive_spin_lock, flags);
+
+ speed = pio + XFER_PIO_0;
+ ide_config_drive_speed(drive, speed);
+}
+
+static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
+{
+ u8 mode = 0;
+ int mem_sttime;
+ int mem_stcfg;
+ unsigned long flags;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ struct hd_driveid *id = drive->id;
+
+ /*
+ * Now see what the current drive is capable of,
+ * selecting UDMA only if the mate said it was ok.
+ */
+ if (id && (id->capability & 1) && drive->autodma &&
+ !__ide_dma_bad_drive(drive)) {
+ if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
+ if (id->dma_mword & 4)
+ mode = XFER_MW_DMA_2;
+ else if (id->dma_mword & 2)
+ mode = XFER_MW_DMA_1;
+ else if (id->dma_mword & 1)
+ mode = XFER_MW_DMA_0;
+ }
+ }
+#endif
+
+ spin_lock_irqsave(&ide_tune_chipset_spin_lock, flags);
+
+ mem_sttime = 0;
+ mem_stcfg = au_readl(MEM_STCFG2);
+
+ switch(speed) {
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ auide_tune_drive(drive, (speed - XFER_PIO_0));
+ break;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ case XFER_MW_DMA_2:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA2_TWCS
+ | SBC_IDE_MDMA2_TCSH
+ | SBC_IDE_MDMA2_TCSOFF
+ | SBC_IDE_MDMA2_TWP
+ | SBC_IDE_MDMA2_TCSW
+ | SBC_IDE_MDMA2_TPM
+ | SBC_IDE_MDMA2_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;
+
+ mode = XFER_MW_DMA_2;
+ break;
+ case XFER_MW_DMA_1:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA1_TWCS
+ | SBC_IDE_MDMA1_TCSH
+ | SBC_IDE_MDMA1_TCSOFF
+ | SBC_IDE_MDMA1_TWP
+ | SBC_IDE_MDMA1_TCSW
+ | SBC_IDE_MDMA1_TPM
+ | SBC_IDE_MDMA1_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg &= ~TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;
+
+ mode = XFER_MW_DMA_1;
+ break;
+ case XFER_MW_DMA_0:
+ /* set timing parameters for RCS2# */
+ mem_sttime = SBC_IDE_MDMA0_TWCS
+ | SBC_IDE_MDMA0_TCSH
+ | SBC_IDE_MDMA0_TCSOFF
+ | SBC_IDE_MDMA0_TWP
+ | SBC_IDE_MDMA0_TCSW
+ | SBC_IDE_MDMA0_TPM
+ | SBC_IDE_MDMA0_TA;
+ /* set configuration for RCS2# */
+ mem_stcfg |= TS_MASK;
+ mem_stcfg &= ~TCSOE_MASK;
+ mem_stcfg &= ~TOECS_MASK;
+ mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;
+
+ mode = XFER_MW_DMA_0;
+ break;
+#endif
+ default:
+ return 1;
+ }
+
+ /*
+ * Tell the drive to switch to the new mode; abort on failure.
+ */
+ if (!mode || ide_config_drive_speed(drive, mode))
+ {
+ return 1; /* failure */
+ }
+
+
+ au_writel(mem_sttime,MEM_STTIME2);
+ au_writel(mem_stcfg,MEM_STCFG2);
+
+ spin_unlock_irqrestore(&ide_tune_chipset_spin_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Multi-Word DMA + DbDMA functions
+ */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+
+static int in_drive_list(struct hd_driveid *id,
+ const struct drive_list_entry *drive_table)
+{
+ for ( ; drive_table->id_model ; drive_table++){
+ if ((!strcmp(drive_table->id_model, id->model)) &&
+ ((strstr(drive_table->id_firmware, id->fw_rev)) ||
+ (!strcmp(drive_table->id_firmware, "ALL")))
+ )
+ return 1;
+ }
+ return 0;
+}
+
+static int auide_build_sglist(ide_drive_t *drive, struct request *rq)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+ struct scatterlist *sg = hwif->sg_table;
+
+ ide_map_sg(drive, rq);
+
+ if (rq_data_dir(rq) == READ)
+ hwif->sg_dma_direction = DMA_FROM_DEVICE;
+ else
+ hwif->sg_dma_direction = DMA_TO_DEVICE;
+
+ return dma_map_sg(ahwif->dev, sg, hwif->sg_nents,
+ hwif->sg_dma_direction);
+}
+
+static int auide_build_dmatable(ide_drive_t *drive)
+{
+ int i, iswrite, count = 0;
+ ide_hwif_t *hwif = HWIF(drive);
+
+ struct request *rq = HWGROUP(drive)->rq;
+
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+ struct scatterlist *sg;
+
+ iswrite = (rq_data_dir(rq) == WRITE);
+ /* Save for interrupt context */
+ ahwif->drive = drive;
+
+ /* Build sglist */
+ hwif->sg_nents = i = auide_build_sglist(drive, rq);
+
+ if (!i)
+ return 0;
+
+ /* fill the descriptors */
+ sg = hwif->sg_table;
+ while (i && sg_dma_len(sg)) {
+ u32 cur_addr;
+ u32 cur_len;
+
+ cur_addr = sg_dma_address(sg);
+ cur_len = sg_dma_len(sg);
+
+ while (cur_len) {
+ u32 flags = DDMA_FLAGS_NOIE;
+ unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
+
+ if (++count >= PRD_ENTRIES) {
+ printk(KERN_WARNING "%s: DMA table too small\n",
+ drive->name);
+ goto use_pio_instead;
+ }
+
+ /* Lets enable intr for the last descriptor only */
+ if (1==i)
+ flags = DDMA_FLAGS_IE;
+ else
+ flags = DDMA_FLAGS_NOIE;
+
+ if (iswrite) {
+ if(!put_source_flags(ahwif->tx_chan,
+ (void*)(page_address(sg->page)
+ + sg->offset),
+ tc, flags)) {
+ printk(KERN_ERR "%s failed %d\n",
+ __FUNCTION__, __LINE__);
+ }
+ } else
+ {
+ if(!put_dest_flags(ahwif->rx_chan,
+ (void*)(page_address(sg->page)
+ + sg->offset),
+ tc, flags)) {
+ printk(KERN_ERR "%s failed %d\n",
+ __FUNCTION__, __LINE__);
+ }
+ }
+
+ cur_addr += tc;
+ cur_len -= tc;
+ }
+ sg++;
+ i--;
+ }
+
+ if (count)
+ return 1;
+
+use_pio_instead:
+ dma_unmap_sg(ahwif->dev,
+ hwif->sg_table,
+ hwif->sg_nents,
+ hwif->sg_dma_direction);
+
+ return 0; /* revert to PIO for this request */
+}
+
+static int auide_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
+
+ if (hwif->sg_nents) {
+ dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents,
+ hwif->sg_dma_direction);
+ hwif->sg_nents = 0;
+ }
+
+ return 0;
+}
+
+static void auide_dma_start(ide_drive_t *drive )
+{
+// printk("%s\n", __FUNCTION__);
+}
+
+ide_startstop_t auide_dma_intr(ide_drive_t *drive)
+{
+ //printk("%s\n", __FUNCTION__);
+
+ u8 stat = 0, dma_stat = 0;
+
+ dma_stat = HWIF(drive)->ide_dma_end(drive);
+ stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */
+ if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
+ if (!dma_stat) {
+ struct request *rq = HWGROUP(drive)->rq;
+
+ ide_end_request(drive, 1, rq->nr_sectors);
+ return ide_stopped;
+ }
+ printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n",
+ drive->name, dma_stat);
+ }
+ return ide_error(drive, "dma_intr", stat);
+}
+
+static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+{
+ //printk("%s\n", __FUNCTION__);
+
+ /* issue cmd to drive */
+ ide_execute_command(drive, command, &auide_dma_intr,
+ (2*WAIT_CMD), NULL);
+}
+
+static int auide_dma_setup(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ if (drive->media != ide_disk)
+ return 1;
+
+ if (!auide_build_dmatable(drive))
+ /* try PIO instead of DMA */
+ return 1;
+
+ drive->waiting_for_dma = 1;
+
+ return 0;
+}
+
+static int auide_dma_check(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ if( !dbdma_init_done ){
+ auide_hwif.white_list = in_drive_list(drive->id,
+ dma_white_list);
+ auide_hwif.black_list = in_drive_list(drive->id,
+ dma_black_list);
+ auide_hwif.drive = drive;
+ auide_ddma_init(&auide_hwif);
+ dbdma_init_done = 1;
+ }
+#endif
+
+ /* Is the drive in our DMA black list? */
+ if ( auide_hwif.black_list ) {
+ drive->using_dma = 0;
+ printk("%s found in dma_blacklist[]! Disabling DMA.\n",
+ drive->id->model);
+ }
+ else
+ drive->using_dma = 1;
+
+ return HWIF(drive)->ide_dma_host_on(drive);
+}
+
+static int auide_dma_test_irq(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ if (!drive->waiting_for_dma)
+ printk(KERN_WARNING "%s: ide_dma_test_irq \
+ called while not waiting\n", drive->name);
+
+ /* If dbdma didn't execute the STOP command yet, the
+ * active bit is still set
+ */
+ drive->waiting_for_dma++;
+ if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
+ printk(KERN_WARNING "%s: timeout waiting for ddma to \
+ complete\n", drive->name);
+ return 1;
+ }
+ udelay(10);
+ return 0;
+}
+
+static int auide_dma_host_on(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ return 0;
+}
+
+static int auide_dma_on(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ drive->using_dma = 1;
+ return auide_dma_host_on(drive);
+}
+
+
+static int auide_dma_host_off(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ return 0;
+}
+
+static int auide_dma_off_quietly(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+ drive->using_dma = 0;
+ return auide_dma_host_off(drive);
+}
+
+static int auide_dma_lostirq(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ printk(KERN_ERR "%s: IRQ lost\n", drive->name);
+ return 0;
+}
+
+static void auide_ddma_tx_callback(int irq, void *param, struct pt_regs *regs)
+{
+// printk("%s\n", __FUNCTION__);
+
+ _auide_hwif *ahwif = (_auide_hwif*)param;
+ ahwif->drive->waiting_for_dma = 0;
+ return;
+}
+
+static void auide_ddma_rx_callback(int irq, void *param, struct pt_regs *regs)
+{
+// printk("%s\n", __FUNCTION__);
+
+ _auide_hwif *ahwif = (_auide_hwif*)param;
+ ahwif->drive->waiting_for_dma = 0;
+ return;
+}
+
+static int auide_dma_timeout(ide_drive_t *drive)
+{
+// printk("%s\n", __FUNCTION__);
+
+ printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
+
+ if (HWIF(drive)->ide_dma_test_irq(drive))
+ return 0;
+
+ return HWIF(drive)->ide_dma_end(drive);
+}
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+
+
+static int auide_ddma_init( _auide_hwif *auide )
+{
+// printk("%s\n", __FUNCTION__);
+
+ dbdev_tab_t source_dev_tab;
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ dbdev_tab_t target_dev_tab;
+ ide_hwif_t *hwif = auide->hwif;
+ char warning_output [2][80];
+ int i;
+#endif
+
+ /* Add our custom device to DDMA device table */
+ /* Create our new device entries in the table */
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ source_dev_tab.dev_id = AU1XXX_ATA_DDMA_REQ;
+
+ if( auide->white_list || auide->black_list ){
+ source_dev_tab.dev_tsize = 8;
+ source_dev_tab.dev_devwidth = 32;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+
+ /* init device table for target - static bus controller - */
+ target_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ target_dev_tab.dev_tsize = 8;
+ target_dev_tab.dev_devwidth = 32;
+ target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ target_dev_tab.dev_intlevel = 0;
+ target_dev_tab.dev_intpolarity = 0;
+ target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE;
+ }
+ else{
+ source_dev_tab.dev_tsize = 1;
+ source_dev_tab.dev_devwidth = 16;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+
+ /* init device table for target - static bus controller - */
+ target_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ target_dev_tab.dev_tsize = 1;
+ target_dev_tab.dev_devwidth = 16;
+ target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ target_dev_tab.dev_intlevel = 0;
+ target_dev_tab.dev_intpolarity = 0;
+ target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE;
+
+ sprintf(&warning_output[0][0],
+ "%s is not on ide driver white list.",
+ auide_hwif.drive->id->model);
+ for ( i=strlen(&warning_output[0][0]) ; i<76; i++ ){
+ sprintf(&warning_output[0][i]," ");
+ }
+
+ sprintf(&warning_output[1][0],
+ "To add %s please read 'Documentation/mips/AU1xxx_IDE.README'.",
+ auide_hwif.drive->id->model);
+ for ( i=strlen(&warning_output[1][0]) ; i<76; i++ ){
+ sprintf(&warning_output[1][i]," ");
+ }
+
+ printk("\n****************************************");
+ printk("****************************************\n");
+ printk("* %s *\n",&warning_output[0][0]);
+ printk("* Switch to safe MWDMA Mode! ");
+ printk(" *\n");
+ printk("* %s *\n",&warning_output[1][0]);
+ printk("****************************************");
+ printk("****************************************\n\n");
+ }
+#else
+ source_dev_tab.dev_id = DSCR_CMD0_ALWAYS;
+ source_dev_tab.dev_tsize = 8;
+ source_dev_tab.dev_devwidth = 32;
+ source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR;
+ source_dev_tab.dev_intlevel = 0;
+ source_dev_tab.dev_intpolarity = 0;
+#endif
+
+#if CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ /* set flags for tx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_OUT
+ | DEV_FLAGS_SYNC
+ | DEV_FLAGS_BURSTABLE;
+ auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+ /* set flags for rx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_IN
+ | DEV_FLAGS_SYNC
+ | DEV_FLAGS_BURSTABLE;
+ auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+#else
+ /* set flags for tx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_OUT | DEV_FLAGS_SYNC;
+ auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+ /* set flags for rx channel */
+ source_dev_tab.dev_flags = DEV_FLAGS_IN | DEV_FLAGS_SYNC;
+ auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+
+ auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);
+
+ /* Get a channel for TX */
+ auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
+ auide->tx_dev_id,
+ auide_ddma_tx_callback,
+ (void*)auide);
+ /* Get a channel for RX */
+ auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
+ auide->target_dev_id,
+ auide_ddma_rx_callback,
+ (void*)auide);
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+ /*
+ * Note: if call back is not enabled, update ctp->cur_ptr manually
+ */
+ auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
+ auide->tx_dev_id,
+ NULL,
+ (void*)auide);
+ auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
+ DSCR_CMD0_ALWAYS,
+ NULL,
+ (void*)auide);
+#endif
+ auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
+ NUM_DESCRIPTORS);
+ auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
+ NUM_DESCRIPTORS);
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ hwif->dmatable_cpu = dma_alloc_coherent(auide->dev,
+ PRD_ENTRIES * PRD_BYTES, /* 1 Page */
+ &hwif->dmatable_dma, GFP_KERNEL);
+
+ auide->sg_table = kmalloc(sizeof(struct scatterlist) * PRD_ENTRIES,
+ GFP_KERNEL|GFP_DMA);
+ if (auide->sg_table == NULL) {
+ return -ENOMEM;
+ }
+#endif
+ au1xxx_dbdma_start( auide->tx_chan );
+ au1xxx_dbdma_start( auide->rx_chan );
+ return 0;
+}
+
+static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
+{
+ int i;
+#define ide_ioreg_t unsigned long
+ ide_ioreg_t *ata_regs = hw->io_ports;
+
+ /* fixme */
+ for (i = 0; i < IDE_CONTROL_OFFSET; i++) {
+ *ata_regs++ = (ide_ioreg_t) ahwif->regbase
+ + (ide_ioreg_t)(i << AU1XXX_ATA_REG_OFFSET);
+ }
+
+ /* set the Alternative Status register */
+ *ata_regs = (ide_ioreg_t) ahwif->regbase
+ + (ide_ioreg_t)(14 << AU1XXX_ATA_REG_OFFSET);
+}
+
+static int au_ide_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ _auide_hwif *ahwif = &auide_hwif;
+ ide_hwif_t *hwif;
+ struct resource *res;
+ int ret = 0;
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+ char *mode = "MWDMA2";
+#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+ char *mode = "PIO+DDMA(offload)";
+#endif
+
+ memset(&auide_hwif, 0, sizeof(_auide_hwif));
+ auide_hwif.dev = 0;
+
+ ahwif->dev = dev;
+ ahwif->irq = platform_get_irq(pdev, 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (res == NULL) {
+ pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
+ pr_debug("%s: request_mem_region failed\n", DRV_NAME);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
+ if (ahwif->regbase == 0) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ hwif = &ide_hwifs[pdev->id];
+ hw_regs_t *hw = &hwif->hw;
+ hwif->irq = hw->irq = ahwif->irq;
+ hwif->chipset = ide_au1xxx;
+
+ auide_setup_ports(hw, ahwif);
+ memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
+ hwif->rqsize = CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ;
+ hwif->rqsize = ((hwif->rqsize > AU1XXX_ATA_RQSIZE)
+ || (hwif->rqsize < 32)) ? AU1XXX_ATA_RQSIZE : hwif->rqsize;
+#else /* if kernel config is not set */
+ hwif->rqsize = AU1XXX_ATA_RQSIZE;
+#endif
+
+ hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */
+ hwif->swdma_mask = 0x07;
+#else
+ hwif->mwdma_mask = 0x0;
+ hwif->swdma_mask = 0x0;
+#endif
+ //hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
+ hwif->noprobe = 0;
+ hwif->drives[0].unmask = 1;
+ hwif->drives[1].unmask = 1;
+
+ /* hold should be on in all cases */
+ hwif->hold = 1;
+ hwif->mmio = 2;
+
+ /* set up local I/O function entry points */
+ hwif->INB = auide_inb;
+ hwif->INW = auide_inw;
+ hwif->INL = auide_inl;
+ hwif->INSW = auide_insw;
+ hwif->INSL = auide_insl;
+ hwif->OUTB = auide_outb;
+ hwif->OUTBSYNC = auide_outbsync;
+ hwif->OUTW = auide_outw;
+ hwif->OUTL = auide_outl;
+ hwif->OUTSW = auide_outsw;
+ hwif->OUTSL = auide_outsl;
+
+ hwif->tuneproc = &auide_tune_drive;
+ hwif->speedproc = &auide_tune_chipset;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ hwif->ide_dma_off_quietly = &auide_dma_off_quietly;
+ hwif->ide_dma_timeout = &auide_dma_timeout;
+
+ hwif->ide_dma_check = &auide_dma_check;
+ hwif->dma_exec_cmd = &auide_dma_exec_cmd;
+ hwif->dma_start = &auide_dma_start;
+ hwif->ide_dma_end = &auide_dma_end;
+ hwif->dma_setup = &auide_dma_setup;
+ hwif->ide_dma_test_irq = &auide_dma_test_irq;
+ hwif->ide_dma_host_off = &auide_dma_host_off;
+ hwif->ide_dma_host_on = &auide_dma_host_on;
+ hwif->ide_dma_lostirq = &auide_dma_lostirq;
+ hwif->ide_dma_on = &auide_dma_on;
+
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+ hwif->atapi_dma = 1;
+ hwif->drives[0].using_dma = 1;
+ hwif->drives[1].using_dma = 1;
+#else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+ hwif->autodma = 0;
+ hwif->channel = 0;
+ hwif->hold = 1;
+ hwif->select_data = 0; /* no chipset-specific code */
+ hwif->config_data = 0; /* no chipset-specific code */
+
+ hwif->drives[0].autodma = 0;
+ hwif->drives[0].drive_data = 0; /* no drive data */
+ hwif->drives[0].using_dma = 0;
+ hwif->drives[0].waiting_for_dma = 0;
+ hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */
+ /* secondary hdd not supported */
+ hwif->drives[1].autodma = 0;
+
+ hwif->drives[1].drive_data = 0;
+ hwif->drives[1].using_dma = 0;
+ hwif->drives[1].waiting_for_dma = 0;
+ hwif->drives[1].autotune = 2; /* 1=autotune, 2=noautotune, 0=default */
+#endif
+ hwif->drives[0].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+ hwif->drives[1].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+
+ /*Register Driver with PM Framework*/
+#ifdef CONFIG_PM
+ auide_hwif.pm.lock = SPIN_LOCK_UNLOCKED;
+ auide_hwif.pm.stopped = 0;
+
+ auide_hwif.pm.dev = new_au1xxx_power_device( "ide",
+ &au1200ide_pm_callback,
+ NULL);
+ if ( auide_hwif.pm.dev == NULL )
+ printk(KERN_INFO "Unable to create a power management \
+ device entry for the au1200-IDE.\n");
+ else
+ printk(KERN_INFO "Power management device entry for the \
+ au1200-IDE loaded.\n");
+#endif
+
+ auide_hwif.hwif = hwif;
+ hwif->hwif_data = &auide_hwif;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ auide_ddma_init(&auide_hwif);
+ dbdma_init_done = 1;
+#endif
+
+ probe_hwif_init(hwif);
+ dev_set_drvdata(dev, hwif);
+
+ printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
+
+out:
+ return ret;
+}
+
+static int au_ide_remove(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+ ide_hwif_t *hwif = dev_get_drvdata(dev);
+ _auide_hwif *ahwif = &auide_hwif;
+
+ ide_unregister(hwif - ide_hwifs);
+
+ iounmap((void *)ahwif->regbase);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start);
+
+ return 0;
+}
+
+static struct device_driver au1200_ide_driver = {
+ .name = "au1200-ide",
+ .bus = &platform_bus_type,
+ .probe = au_ide_probe,
+ .remove = au_ide_remove,
+};
+
+static int __init au_ide_init(void)
+{
+ return driver_register(&au1200_ide_driver);
+}
+
+static void __init au_ide_exit(void)
+{
+ driver_unregister(&au1200_ide_driver);
+}
+
+#ifdef CONFIG_PM
+int au1200ide_pm_callback( au1xxx_power_dev_t *dev,\
+ au1xxx_request_t request, void *data) {
+
+ unsigned int d, err = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(auide_hwif.pm.lock, flags);
+
+ switch (request){
+ case AU1XXX_PM_SLEEP:
+ err = au1xxxide_pm_sleep(dev);
+ break;
+ case AU1XXX_PM_WAKEUP:
+ d = *((unsigned int*)data);
+ if ( d > 0 && d <= 99) {
+ err = au1xxxide_pm_standby(dev);
+ }
+ else {
+ err = au1xxxide_pm_resume(dev);
+ }
+ break;
+ case AU1XXX_PM_GETSTATUS:
+ err = au1xxxide_pm_getstatus(dev);
+ break;
+ case AU1XXX_PM_ACCESS:
+ err = au1xxxide_pm_access(dev);
+ break;
+ case AU1XXX_PM_IDLE:
+ err = au1xxxide_pm_idle(dev);
+ break;
+ case AU1XXX_PM_CLEANUP:
+ err = au1xxxide_pm_cleanup(dev);
+ break;
+ default:
+ err = -1;
+ break;
+ }
+
+ spin_unlock_irqrestore(auide_hwif.pm.lock, flags);
+
+ return err;
+}
+
+static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+
+static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev ) {
+
+ int retval;
+ ide_hwif_t *hwif = auide_hwif.hwif;
+ struct request rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+
+ if(auide_hwif.pm.stopped)
+ return -1;
+
+ /*
+ * wait until hard disc is ready
+ */
+ if ( wait_for_ready(&hwif->drives[0], 35000) ) {
+ printk("Wait for drive sleep timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * sequenz to tell the high level ide driver that pm is resuming
+ */
+ memset(&rq, 0, sizeof(rq));
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq.flags = REQ_PM_SUSPEND;
+ rq.special = &args;
+ rq.pm = &rqpm;
+ rqpm.pm_step = ide_pm_state_start_suspend;
+ rqpm.pm_state = PMSG_SUSPEND;
+
+ retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_wait);
+
+ if (wait_for_ready (&hwif->drives[0], 35000)) {
+ printk("Wait for drive sleep timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * stop dbdma channels
+ */
+ au1xxx_dbdma_reset(auide_hwif.tx_chan);
+ au1xxx_dbdma_reset(auide_hwif.rx_chan);
+
+ auide_hwif.pm.stopped = 1;
+
+ return retval;
+}
+
+static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev ) {
+
+ int retval;
+ ide_hwif_t *hwif = auide_hwif.hwif;
+ struct request rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+
+ if(!auide_hwif.pm.stopped)
+ return -1;
+
+ /*
+ * start dbdma channels
+ */
+ au1xxx_dbdma_start(auide_hwif.tx_chan);
+ au1xxx_dbdma_start(auide_hwif.rx_chan);
+
+ /*
+ * wait until hard disc is ready
+ */
+ if (wait_for_ready ( &hwif->drives[0], 35000)) {
+ printk("Wait for drive wake up timeout!\n");
+ retval = -1;
+ }
+
+ /*
+ * sequenz to tell the high level ide driver that pm is resuming
+ */
+ memset(&rq, 0, sizeof(rq));
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq.flags = REQ_PM_RESUME;
+ rq.special = &args;
+ rq.pm = &rqpm;
+ rqpm.pm_step = ide_pm_state_start_resume;
+ rqpm.pm_state = PMSG_ON;
+
+ retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_head_wait);
+
+ /*
+ * wait for hard disc
+ */
+ if ( wait_for_ready(&hwif->drives[0], 35000) ) {
+ printk("Wait for drive wake up timeout!\n");
+ retval = -1;
+ }
+
+ auide_hwif.pm.stopped = 0;
+
+ return retval;
+}
+
+static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev ) {
+ return dev->cur_state;
+}
+
+static int au1xxxide_pm_access( au1xxx_power_dev_t *dev ) {
+ if (dev->cur_state != AWAKE_STATE)
+ return 0;
+ else
+ return -1;
+}
+
+static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+
+static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev ) {
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AU1200 IDE driver");
+
+module_init(au_ide_init);
+module_exit(au_ide_exit);
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index e34730c..cbbbe14 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -2361,7 +2361,7 @@
ohci = (struct ti_ohci *)host->hostdata;
- class_device_create(hpsb_protocol_class, MKDEV(
+ class_device_create(hpsb_protocol_class, NULL, MKDEV(
IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)),
NULL, "dv1394-%d", id);
devfs_mk_dir("ieee1394/dv/host%d", id);
diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c
index 4802bbb..c9e92d8 100644
--- a/drivers/ieee1394/eth1394.c
+++ b/drivers/ieee1394/eth1394.c
@@ -1630,7 +1630,7 @@
/* Transmit a packet (called by kernel) */
static int ether1394_tx (struct sk_buff *skb, struct net_device *dev)
{
- int kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
+ gfp_t kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
struct eth1394hdr *eth;
struct eth1394_priv *priv = netdev_priv(dev);
int proto;
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 347ece6..7fff5a1 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1292,7 +1292,7 @@
if (ud->device.driver &&
(!ud->device.driver->suspend ||
- ud->device.driver->suspend(&ud->device, PMSG_SUSPEND, 0)))
+ ud->device.driver->suspend(&ud->device, PMSG_SUSPEND)))
device_release_driver(&ud->device);
}
up_write(&ne->device.bus->subsys.rwsem);
@@ -1315,7 +1315,7 @@
continue;
if (ud->device.driver && ud->device.driver->resume)
- ud->device.driver->resume(&ud->device, 0);
+ ud->device.driver->resume(&ud->device);
}
up_read(&ne->device.bus->subsys.rwsem);
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index 0470f77..24411e6 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -2912,7 +2912,7 @@
hpsb_register_highlevel(&raw1394_highlevel);
- if (IS_ERR(class_device_create(hpsb_protocol_class, MKDEV(
+ if (IS_ERR(class_device_create(hpsb_protocol_class, NULL, MKDEV(
IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16),
NULL, RAW1394_DEVICE_NAME))) {
ret = -EFAULT;
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 11be9c9..23911da 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -1370,7 +1370,7 @@
hpsb_set_hostinfo_key(&video1394_highlevel, host, ohci->host->id);
minor = IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id;
- class_device_create(hpsb_protocol_class, MKDEV(
+ class_device_create(hpsb_protocol_class, NULL, MKDEV(
IEEE1394_MAJOR, minor),
NULL, "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
devfs_mk_cdev(MKDEV(IEEE1394_MAJOR, minor),
diff --git a/drivers/infiniband/core/agent.c b/drivers/infiniband/core/agent.c
index 5ac86f5..0c3c695 100644
--- a/drivers/infiniband/core/agent.c
+++ b/drivers/infiniband/core/agent.c
@@ -37,58 +37,41 @@
* $Id: agent.c 1389 2004-12-27 22:56:47Z roland $
*/
-#include <linux/dma-mapping.h>
-
-#include <asm/bug.h>
-
-#include <rdma/ib_smi.h>
-
-#include "smi.h"
-#include "agent_priv.h"
-#include "mad_priv.h"
#include "agent.h"
+#include "smi.h"
-spinlock_t ib_agent_port_list_lock;
+#define SPFX "ib_agent: "
+
+struct ib_agent_port_private {
+ struct list_head port_list;
+ struct ib_mad_agent *agent[2];
+};
+
+static DEFINE_SPINLOCK(ib_agent_port_list_lock);
static LIST_HEAD(ib_agent_port_list);
-/*
- * Caller must hold ib_agent_port_list_lock
- */
-static inline struct ib_agent_port_private *
-__ib_get_agent_port(struct ib_device *device, int port_num,
- struct ib_mad_agent *mad_agent)
+static struct ib_agent_port_private *
+__ib_get_agent_port(struct ib_device *device, int port_num)
{
struct ib_agent_port_private *entry;
- BUG_ON(!(!!device ^ !!mad_agent)); /* Exactly one MUST be (!NULL) */
-
- if (device) {
- list_for_each_entry(entry, &ib_agent_port_list, port_list) {
- if (entry->smp_agent->device == device &&
- entry->port_num == port_num)
- return entry;
- }
- } else {
- list_for_each_entry(entry, &ib_agent_port_list, port_list) {
- if ((entry->smp_agent == mad_agent) ||
- (entry->perf_mgmt_agent == mad_agent))
- return entry;
- }
+ list_for_each_entry(entry, &ib_agent_port_list, port_list) {
+ if (entry->agent[0]->device == device &&
+ entry->agent[0]->port_num == port_num)
+ return entry;
}
return NULL;
}
-static inline struct ib_agent_port_private *
-ib_get_agent_port(struct ib_device *device, int port_num,
- struct ib_mad_agent *mad_agent)
+static struct ib_agent_port_private *
+ib_get_agent_port(struct ib_device *device, int port_num)
{
struct ib_agent_port_private *entry;
unsigned long flags;
spin_lock_irqsave(&ib_agent_port_list_lock, flags);
- entry = __ib_get_agent_port(device, port_num, mad_agent);
+ entry = __ib_get_agent_port(device, port_num);
spin_unlock_irqrestore(&ib_agent_port_list_lock, flags);
-
return entry;
}
@@ -100,192 +83,76 @@
if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)
return 1;
- port_priv = ib_get_agent_port(device, port_num, NULL);
+
+ port_priv = ib_get_agent_port(device, port_num);
if (!port_priv) {
printk(KERN_DEBUG SPFX "smi_check_local_dr_smp %s port %d "
- "not open\n",
- device->name, port_num);
+ "not open\n", device->name, port_num);
return 1;
}
- return smi_check_local_smp(port_priv->smp_agent, smp);
+ return smi_check_local_smp(port_priv->agent[0], smp);
}
-static int agent_mad_send(struct ib_mad_agent *mad_agent,
- struct ib_agent_port_private *port_priv,
- struct ib_mad_private *mad_priv,
- struct ib_grh *grh,
- struct ib_wc *wc)
-{
- struct ib_agent_send_wr *agent_send_wr;
- struct ib_sge gather_list;
- struct ib_send_wr send_wr;
- struct ib_send_wr *bad_send_wr;
- struct ib_ah_attr ah_attr;
- unsigned long flags;
- int ret = 1;
-
- agent_send_wr = kmalloc(sizeof(*agent_send_wr), GFP_KERNEL);
- if (!agent_send_wr)
- goto out;
- agent_send_wr->mad = mad_priv;
-
- gather_list.addr = dma_map_single(mad_agent->device->dma_device,
- &mad_priv->mad,
- sizeof(mad_priv->mad),
- DMA_TO_DEVICE);
- gather_list.length = sizeof(mad_priv->mad);
- gather_list.lkey = mad_agent->mr->lkey;
-
- send_wr.next = NULL;
- send_wr.opcode = IB_WR_SEND;
- send_wr.sg_list = &gather_list;
- send_wr.num_sge = 1;
- send_wr.wr.ud.remote_qpn = wc->src_qp; /* DQPN */
- send_wr.wr.ud.timeout_ms = 0;
- send_wr.send_flags = IB_SEND_SIGNALED | IB_SEND_SOLICITED;
-
- ah_attr.dlid = wc->slid;
- ah_attr.port_num = mad_agent->port_num;
- ah_attr.src_path_bits = wc->dlid_path_bits;
- ah_attr.sl = wc->sl;
- ah_attr.static_rate = 0;
- ah_attr.ah_flags = 0; /* No GRH */
- if (mad_priv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT) {
- if (wc->wc_flags & IB_WC_GRH) {
- ah_attr.ah_flags = IB_AH_GRH;
- /* Should sgid be looked up ? */
- ah_attr.grh.sgid_index = 0;
- ah_attr.grh.hop_limit = grh->hop_limit;
- ah_attr.grh.flow_label = be32_to_cpu(
- grh->version_tclass_flow) & 0xfffff;
- ah_attr.grh.traffic_class = (be32_to_cpu(
- grh->version_tclass_flow) >> 20) & 0xff;
- memcpy(ah_attr.grh.dgid.raw,
- grh->sgid.raw,
- sizeof(ah_attr.grh.dgid));
- }
- }
-
- agent_send_wr->ah = ib_create_ah(mad_agent->qp->pd, &ah_attr);
- if (IS_ERR(agent_send_wr->ah)) {
- printk(KERN_ERR SPFX "No memory for address handle\n");
- kfree(agent_send_wr);
- goto out;
- }
-
- send_wr.wr.ud.ah = agent_send_wr->ah;
- if (mad_priv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT) {
- send_wr.wr.ud.pkey_index = wc->pkey_index;
- send_wr.wr.ud.remote_qkey = IB_QP1_QKEY;
- } else { /* for SMPs */
- send_wr.wr.ud.pkey_index = 0;
- send_wr.wr.ud.remote_qkey = 0;
- }
- send_wr.wr.ud.mad_hdr = &mad_priv->mad.mad.mad_hdr;
- send_wr.wr_id = (unsigned long)agent_send_wr;
-
- pci_unmap_addr_set(agent_send_wr, mapping, gather_list.addr);
-
- /* Send */
- spin_lock_irqsave(&port_priv->send_list_lock, flags);
- if (ib_post_send_mad(mad_agent, &send_wr, &bad_send_wr)) {
- spin_unlock_irqrestore(&port_priv->send_list_lock, flags);
- dma_unmap_single(mad_agent->device->dma_device,
- pci_unmap_addr(agent_send_wr, mapping),
- sizeof(mad_priv->mad),
- DMA_TO_DEVICE);
- ib_destroy_ah(agent_send_wr->ah);
- kfree(agent_send_wr);
- } else {
- list_add_tail(&agent_send_wr->send_list,
- &port_priv->send_posted_list);
- spin_unlock_irqrestore(&port_priv->send_list_lock, flags);
- ret = 0;
- }
-
-out:
- return ret;
-}
-
-int agent_send(struct ib_mad_private *mad,
- struct ib_grh *grh,
- struct ib_wc *wc,
- struct ib_device *device,
- int port_num)
+int agent_send_response(struct ib_mad *mad, struct ib_grh *grh,
+ struct ib_wc *wc, struct ib_device *device,
+ int port_num, int qpn)
{
struct ib_agent_port_private *port_priv;
- struct ib_mad_agent *mad_agent;
+ struct ib_mad_agent *agent;
+ struct ib_mad_send_buf *send_buf;
+ struct ib_ah *ah;
+ int ret;
- port_priv = ib_get_agent_port(device, port_num, NULL);
+ port_priv = ib_get_agent_port(device, port_num);
if (!port_priv) {
- printk(KERN_DEBUG SPFX "agent_send %s port %d not open\n",
- device->name, port_num);
- return 1;
+ printk(KERN_ERR SPFX "Unable to find port agent\n");
+ return -ENODEV;
}
- /* Get mad agent based on mgmt_class in MAD */
- switch (mad->mad.mad.mad_hdr.mgmt_class) {
- case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE:
- case IB_MGMT_CLASS_SUBN_LID_ROUTED:
- mad_agent = port_priv->smp_agent;
- break;
- case IB_MGMT_CLASS_PERF_MGMT:
- mad_agent = port_priv->perf_mgmt_agent;
- break;
- default:
- return 1;
+ agent = port_priv->agent[qpn];
+ ah = ib_create_ah_from_wc(agent->qp->pd, wc, grh, port_num);
+ if (IS_ERR(ah)) {
+ ret = PTR_ERR(ah);
+ printk(KERN_ERR SPFX "ib_create_ah_from_wc error:%d\n", ret);
+ return ret;
}
- return agent_mad_send(mad_agent, port_priv, mad, grh, wc);
+ send_buf = ib_create_send_mad(agent, wc->src_qp, wc->pkey_index, 0,
+ IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA,
+ GFP_KERNEL);
+ if (IS_ERR(send_buf)) {
+ ret = PTR_ERR(send_buf);
+ printk(KERN_ERR SPFX "ib_create_send_mad error:%d\n", ret);
+ goto err1;
+ }
+
+ memcpy(send_buf->mad, mad, sizeof *mad);
+ send_buf->ah = ah;
+ if ((ret = ib_post_send_mad(send_buf, NULL))) {
+ printk(KERN_ERR SPFX "ib_post_send_mad error:%d\n", ret);
+ goto err2;
+ }
+ return 0;
+err2:
+ ib_free_send_mad(send_buf);
+err1:
+ ib_destroy_ah(ah);
+ return ret;
}
static void agent_send_handler(struct ib_mad_agent *mad_agent,
struct ib_mad_send_wc *mad_send_wc)
{
- struct ib_agent_port_private *port_priv;
- struct ib_agent_send_wr *agent_send_wr;
- unsigned long flags;
-
- /* Find matching MAD agent */
- port_priv = ib_get_agent_port(NULL, 0, mad_agent);
- if (!port_priv) {
- printk(KERN_ERR SPFX "agent_send_handler: no matching MAD "
- "agent %p\n", mad_agent);
- return;
- }
-
- agent_send_wr = (struct ib_agent_send_wr *)(unsigned long)mad_send_wc->wr_id;
- spin_lock_irqsave(&port_priv->send_list_lock, flags);
- /* Remove completed send from posted send MAD list */
- list_del(&agent_send_wr->send_list);
- spin_unlock_irqrestore(&port_priv->send_list_lock, flags);
-
- dma_unmap_single(mad_agent->device->dma_device,
- pci_unmap_addr(agent_send_wr, mapping),
- sizeof(agent_send_wr->mad->mad),
- DMA_TO_DEVICE);
-
- ib_destroy_ah(agent_send_wr->ah);
-
- /* Release allocated memory */
- kmem_cache_free(ib_mad_cache, agent_send_wr->mad);
- kfree(agent_send_wr);
+ ib_destroy_ah(mad_send_wc->send_buf->ah);
+ ib_free_send_mad(mad_send_wc->send_buf);
}
int ib_agent_port_open(struct ib_device *device, int port_num)
{
- int ret;
struct ib_agent_port_private *port_priv;
unsigned long flags;
-
- /* First, check if port already open for SMI */
- port_priv = ib_get_agent_port(device, port_num, NULL);
- if (port_priv) {
- printk(KERN_DEBUG SPFX "%s port %d already open\n",
- device->name, port_num);
- return 0;
- }
+ int ret;
/* Create new device info */
port_priv = kmalloc(sizeof *port_priv, GFP_KERNEL);
@@ -294,32 +161,25 @@
ret = -ENOMEM;
goto error1;
}
-
memset(port_priv, 0, sizeof *port_priv);
- port_priv->port_num = port_num;
- spin_lock_init(&port_priv->send_list_lock);
- INIT_LIST_HEAD(&port_priv->send_posted_list);
- /* Obtain send only MAD agent for SM class (SMI QP) */
- port_priv->smp_agent = ib_register_mad_agent(device, port_num,
- IB_QPT_SMI,
- NULL, 0,
+ /* Obtain send only MAD agent for SMI QP */
+ port_priv->agent[0] = ib_register_mad_agent(device, port_num,
+ IB_QPT_SMI, NULL, 0,
&agent_send_handler,
- NULL, NULL);
-
- if (IS_ERR(port_priv->smp_agent)) {
- ret = PTR_ERR(port_priv->smp_agent);
+ NULL, NULL);
+ if (IS_ERR(port_priv->agent[0])) {
+ ret = PTR_ERR(port_priv->agent[0]);
goto error2;
}
- /* Obtain send only MAD agent for PerfMgmt class (GSI QP) */
- port_priv->perf_mgmt_agent = ib_register_mad_agent(device, port_num,
- IB_QPT_GSI,
- NULL, 0,
- &agent_send_handler,
- NULL, NULL);
- if (IS_ERR(port_priv->perf_mgmt_agent)) {
- ret = PTR_ERR(port_priv->perf_mgmt_agent);
+ /* Obtain send only MAD agent for GSI QP */
+ port_priv->agent[1] = ib_register_mad_agent(device, port_num,
+ IB_QPT_GSI, NULL, 0,
+ &agent_send_handler,
+ NULL, NULL);
+ if (IS_ERR(port_priv->agent[1])) {
+ ret = PTR_ERR(port_priv->agent[1]);
goto error3;
}
@@ -330,7 +190,7 @@
return 0;
error3:
- ib_unregister_mad_agent(port_priv->smp_agent);
+ ib_unregister_mad_agent(port_priv->agent[0]);
error2:
kfree(port_priv);
error1:
@@ -343,7 +203,7 @@
unsigned long flags;
spin_lock_irqsave(&ib_agent_port_list_lock, flags);
- port_priv = __ib_get_agent_port(device, port_num, NULL);
+ port_priv = __ib_get_agent_port(device, port_num);
if (port_priv == NULL) {
spin_unlock_irqrestore(&ib_agent_port_list_lock, flags);
printk(KERN_ERR SPFX "Port %d not found\n", port_num);
@@ -352,9 +212,8 @@
list_del(&port_priv->port_list);
spin_unlock_irqrestore(&ib_agent_port_list_lock, flags);
- ib_unregister_mad_agent(port_priv->perf_mgmt_agent);
- ib_unregister_mad_agent(port_priv->smp_agent);
+ ib_unregister_mad_agent(port_priv->agent[1]);
+ ib_unregister_mad_agent(port_priv->agent[0]);
kfree(port_priv);
-
return 0;
}
diff --git a/drivers/infiniband/core/agent.h b/drivers/infiniband/core/agent.h
index d942684..86d72fa 100644
--- a/drivers/infiniband/core/agent.h
+++ b/drivers/infiniband/core/agent.h
@@ -39,17 +39,15 @@
#ifndef __AGENT_H_
#define __AGENT_H_
-extern spinlock_t ib_agent_port_list_lock;
+#include <linux/err.h>
+#include <rdma/ib_mad.h>
-extern int ib_agent_port_open(struct ib_device *device,
- int port_num);
+extern int ib_agent_port_open(struct ib_device *device, int port_num);
extern int ib_agent_port_close(struct ib_device *device, int port_num);
-extern int agent_send(struct ib_mad_private *mad,
- struct ib_grh *grh,
- struct ib_wc *wc,
- struct ib_device *device,
- int port_num);
+extern int agent_send_response(struct ib_mad *mad, struct ib_grh *grh,
+ struct ib_wc *wc, struct ib_device *device,
+ int port_num, int qpn);
#endif /* __AGENT_H_ */
diff --git a/drivers/infiniband/core/agent_priv.h b/drivers/infiniband/core/agent_priv.h
deleted file mode 100644
index 2ec6d7f..0000000
--- a/drivers/infiniband/core/agent_priv.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2004, 2005 Mellanox Technologies Ltd. All rights reserved.
- * Copyright (c) 2004, 2005 Infinicon Corporation. All rights reserved.
- * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved.
- * Copyright (c) 2004, 2005 Topspin Corporation. All rights reserved.
- * Copyright (c) 2004, 2005 Voltaire Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * $Id: agent_priv.h 1640 2005-01-24 22:39:02Z halr $
- */
-
-#ifndef __IB_AGENT_PRIV_H__
-#define __IB_AGENT_PRIV_H__
-
-#include <linux/pci.h>
-
-#define SPFX "ib_agent: "
-
-struct ib_agent_send_wr {
- struct list_head send_list;
- struct ib_ah *ah;
- struct ib_mad_private *mad;
- DECLARE_PCI_UNMAP_ADDR(mapping)
-};
-
-struct ib_agent_port_private {
- struct list_head port_list;
- struct list_head send_posted_list;
- spinlock_t send_list_lock;
- int port_num;
- struct ib_mad_agent *smp_agent; /* SM class */
- struct ib_mad_agent *perf_mgmt_agent; /* PerfMgmt class */
-};
-
-#endif /* __IB_AGENT_PRIV_H__ */
diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c
index f014e63..c57a387 100644
--- a/drivers/infiniband/core/cache.c
+++ b/drivers/infiniband/core/cache.c
@@ -38,6 +38,7 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/slab.h>
+#include <linux/sched.h> /* INIT_WORK, schedule_work(), flush_scheduled_work() */
#include <rdma/ib_cache.h>
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 54db6d4..580c3a2 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -135,6 +135,7 @@
__be64 tid;
__be32 local_qpn;
__be32 remote_qpn;
+ enum ib_qp_type qp_type;
__be32 sq_psn;
__be32 rq_psn;
int timeout_ms;
@@ -175,8 +176,7 @@
m = ib_create_send_mad(mad_agent, cm_id_priv->id.remote_cm_qpn,
cm_id_priv->av.pkey_index,
- ah, 0, sizeof(struct ib_mad_hdr),
- sizeof(struct ib_mad)-sizeof(struct ib_mad_hdr),
+ 0, IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA,
GFP_ATOMIC);
if (IS_ERR(m)) {
ib_destroy_ah(ah);
@@ -184,7 +184,8 @@
}
/* Timeout set by caller if response is expected. */
- m->send_wr.wr.ud.retries = cm_id_priv->max_cm_retries;
+ m->ah = ah;
+ m->retries = cm_id_priv->max_cm_retries;
atomic_inc(&cm_id_priv->refcount);
m->context[0] = cm_id_priv;
@@ -205,20 +206,20 @@
return PTR_ERR(ah);
m = ib_create_send_mad(port->mad_agent, 1, mad_recv_wc->wc->pkey_index,
- ah, 0, sizeof(struct ib_mad_hdr),
- sizeof(struct ib_mad)-sizeof(struct ib_mad_hdr),
+ 0, IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA,
GFP_ATOMIC);
if (IS_ERR(m)) {
ib_destroy_ah(ah);
return PTR_ERR(m);
}
+ m->ah = ah;
*msg = m;
return 0;
}
static void cm_free_msg(struct ib_mad_send_buf *msg)
{
- ib_destroy_ah(msg->send_wr.wr.ud.ah);
+ ib_destroy_ah(msg->ah);
if (msg->context[0])
cm_deref_id(msg->context[0]);
ib_free_send_mad(msg);
@@ -366,9 +367,15 @@
cur_cm_id_priv = rb_entry(parent, struct cm_id_private,
service_node);
if ((cur_cm_id_priv->id.service_mask & service_id) ==
- (service_mask & cur_cm_id_priv->id.service_id))
- return cm_id_priv;
- if (service_id < cur_cm_id_priv->id.service_id)
+ (service_mask & cur_cm_id_priv->id.service_id) &&
+ (cm_id_priv->id.device == cur_cm_id_priv->id.device))
+ return cur_cm_id_priv;
+
+ if (cm_id_priv->id.device < cur_cm_id_priv->id.device)
+ link = &(*link)->rb_left;
+ else if (cm_id_priv->id.device > cur_cm_id_priv->id.device)
+ link = &(*link)->rb_right;
+ else if (service_id < cur_cm_id_priv->id.service_id)
link = &(*link)->rb_left;
else
link = &(*link)->rb_right;
@@ -378,7 +385,8 @@
return NULL;
}
-static struct cm_id_private * cm_find_listen(__be64 service_id)
+static struct cm_id_private * cm_find_listen(struct ib_device *device,
+ __be64 service_id)
{
struct rb_node *node = cm.listen_service_table.rb_node;
struct cm_id_private *cm_id_priv;
@@ -386,9 +394,15 @@
while (node) {
cm_id_priv = rb_entry(node, struct cm_id_private, service_node);
if ((cm_id_priv->id.service_mask & service_id) ==
- (cm_id_priv->id.service_mask & cm_id_priv->id.service_id))
+ cm_id_priv->id.service_id &&
+ (cm_id_priv->id.device == device))
return cm_id_priv;
- if (service_id < cm_id_priv->id.service_id)
+
+ if (device < cm_id_priv->id.device)
+ node = node->rb_left;
+ else if (device > cm_id_priv->id.device)
+ node = node->rb_right;
+ else if (service_id < cm_id_priv->id.service_id)
node = node->rb_left;
else
node = node->rb_right;
@@ -523,7 +537,8 @@
ib_send_cm_sidr_rep(&cm_id_priv->id, ¶m);
}
-struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler,
+struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
+ ib_cm_handler cm_handler,
void *context)
{
struct cm_id_private *cm_id_priv;
@@ -535,6 +550,7 @@
memset(cm_id_priv, 0, sizeof *cm_id_priv);
cm_id_priv->id.state = IB_CM_IDLE;
+ cm_id_priv->id.device = device;
cm_id_priv->id.cm_handler = cm_handler;
cm_id_priv->id.context = context;
cm_id_priv->id.remote_cm_qpn = 1;
@@ -662,8 +678,7 @@
break;
case IB_CM_SIDR_REQ_SENT:
cm_id->state = IB_CM_IDLE;
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
break;
case IB_CM_SIDR_REQ_RCVD:
@@ -674,8 +689,7 @@
case IB_CM_MRA_REQ_RCVD:
case IB_CM_REP_SENT:
case IB_CM_MRA_REP_RCVD:
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
/* Fall through */
case IB_CM_REQ_RCVD:
case IB_CM_MRA_REQ_SENT:
@@ -692,8 +706,7 @@
ib_send_cm_dreq(cm_id, NULL, 0);
goto retest;
case IB_CM_DREQ_SENT:
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
cm_enter_timewait(cm_id_priv);
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
break;
@@ -867,7 +880,6 @@
struct ib_cm_req_param *param)
{
struct cm_id_private *cm_id_priv;
- struct ib_send_wr *bad_send_wr;
struct cm_req_msg *req_msg;
unsigned long flags;
int ret;
@@ -911,6 +923,7 @@
cm_id_priv->responder_resources = param->responder_resources;
cm_id_priv->retry_count = param->retry_count;
cm_id_priv->path_mtu = param->primary_path->mtu;
+ cm_id_priv->qp_type = param->qp_type;
ret = cm_alloc_msg(cm_id_priv, &cm_id_priv->msg);
if (ret)
@@ -919,7 +932,7 @@
req_msg = (struct cm_req_msg *) cm_id_priv->msg->mad;
cm_format_req(req_msg, cm_id_priv, param);
cm_id_priv->tid = req_msg->hdr.tid;
- cm_id_priv->msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms;
+ cm_id_priv->msg->timeout_ms = cm_id_priv->timeout_ms;
cm_id_priv->msg->context[1] = (void *) (unsigned long) IB_CM_REQ_SENT;
cm_id_priv->local_qpn = cm_req_get_local_qpn(req_msg);
@@ -928,8 +941,7 @@
cm_req_get_primary_local_ack_timeout(req_msg);
spin_lock_irqsave(&cm_id_priv->lock, flags);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &cm_id_priv->msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(cm_id_priv->msg, NULL);
if (ret) {
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
goto error2;
@@ -952,7 +964,6 @@
void *ari, u8 ari_length)
{
struct ib_mad_send_buf *msg = NULL;
- struct ib_send_wr *bad_send_wr;
struct cm_rej_msg *rej_msg, *rcv_msg;
int ret;
@@ -975,7 +986,7 @@
memcpy(rej_msg->ari, ari, ari_length);
}
- ret = ib_post_send_mad(port->mad_agent, &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret)
cm_free_msg(msg);
@@ -1047,7 +1058,6 @@
req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad;
param = &work->cm_event.param.req_rcvd;
param->listen_id = listen_id;
- param->device = cm_id_priv->av.port->mad_agent->device;
param->port = cm_id_priv->av.port->port_num;
param->primary_path = &work->path[0];
if (req_msg->alt_local_lid)
@@ -1156,7 +1166,6 @@
struct cm_id_private *cm_id_priv)
{
struct ib_mad_send_buf *msg = NULL;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -1185,8 +1194,7 @@
}
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr,
- &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret)
goto free;
return;
@@ -1226,7 +1234,8 @@
}
/* Find matching listen request. */
- listen_cm_id_priv = cm_find_listen(req_msg->service_id);
+ listen_cm_id_priv = cm_find_listen(cm_id_priv->id.device,
+ req_msg->service_id);
if (!listen_cm_id_priv) {
spin_unlock_irqrestore(&cm.lock, flags);
cm_issue_rej(work->port, work->mad_recv_wc,
@@ -1254,7 +1263,7 @@
req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad;
- cm_id = ib_create_cm_id(NULL, NULL);
+ cm_id = ib_create_cm_id(work->port->cm_dev->device, NULL, NULL);
if (IS_ERR(cm_id))
return PTR_ERR(cm_id);
@@ -1305,6 +1314,7 @@
cm_req_get_primary_local_ack_timeout(req_msg);
cm_id_priv->retry_count = cm_req_get_retry_count(req_msg);
cm_id_priv->rnr_retry_count = cm_req_get_rnr_retry_count(req_msg);
+ cm_id_priv->qp_type = cm_req_get_qp_type(req_msg);
cm_format_req_event(work, cm_id_priv, &listen_cm_id_priv->id);
cm_process_work(cm_id_priv, work);
@@ -1349,7 +1359,6 @@
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
struct cm_rep_msg *rep_msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -1371,11 +1380,10 @@
rep_msg = (struct cm_rep_msg *) msg->mad;
cm_format_rep(rep_msg, cm_id_priv, param);
- msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms;
+ msg->timeout_ms = cm_id_priv->timeout_ms;
msg->context[1] = (void *) (unsigned long) IB_CM_REP_SENT;
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret) {
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
cm_free_msg(msg);
@@ -1413,7 +1421,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
void *data;
int ret;
@@ -1440,8 +1447,7 @@
cm_format_rtu((struct cm_rtu_msg *) msg->mad, cm_id_priv,
private_data, private_data_len);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret) {
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
cm_free_msg(msg);
@@ -1486,7 +1492,6 @@
struct cm_id_private *cm_id_priv;
struct cm_rep_msg *rep_msg;
struct ib_mad_send_buf *msg = NULL;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -1514,8 +1519,7 @@
goto unlock;
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr,
- &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret)
goto free;
goto deref;
@@ -1583,8 +1587,7 @@
/* todo: handle peer_to_peer */
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
ret = atomic_inc_and_test(&cm_id_priv->work_count);
if (!ret)
list_add_tail(&work->list, &cm_id_priv->work_list);
@@ -1618,8 +1621,7 @@
goto out;
}
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
ret = atomic_inc_and_test(&cm_id_priv->work_count);
if (!ret)
list_add_tail(&work->list, &cm_id_priv->work_list);
@@ -1658,8 +1660,7 @@
}
cm_id_priv->id.state = IB_CM_ESTABLISHED;
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
ret = atomic_inc_and_test(&cm_id_priv->work_count);
if (!ret)
list_add_tail(&work->list, &cm_id_priv->work_list);
@@ -1696,7 +1697,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -1718,11 +1718,10 @@
cm_format_dreq((struct cm_dreq_msg *) msg->mad, cm_id_priv,
private_data, private_data_len);
- msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms;
+ msg->timeout_ms = cm_id_priv->timeout_ms;
msg->context[1] = (void *) (unsigned long) IB_CM_DREQ_SENT;
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret) {
cm_enter_timewait(cm_id_priv);
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
@@ -1756,7 +1755,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
void *data;
int ret;
@@ -1786,8 +1784,7 @@
cm_format_drep((struct cm_drep_msg *) msg->mad, cm_id_priv,
private_data, private_data_len);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr,
- &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret) {
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
cm_free_msg(msg);
@@ -1804,7 +1801,6 @@
struct cm_id_private *cm_id_priv;
struct cm_dreq_msg *dreq_msg;
struct ib_mad_send_buf *msg = NULL;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -1823,8 +1819,7 @@
switch (cm_id_priv->id.state) {
case IB_CM_REP_SENT:
case IB_CM_DREQ_SENT:
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
break;
case IB_CM_ESTABLISHED:
case IB_CM_MRA_REP_RCVD:
@@ -1838,8 +1833,7 @@
cm_id_priv->private_data_len);
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
- if (ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr))
+ if (ib_post_send_mad(msg, NULL))
cm_free_msg(msg);
goto deref;
default:
@@ -1886,8 +1880,7 @@
}
cm_enter_timewait(cm_id_priv);
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
ret = atomic_inc_and_test(&cm_id_priv->work_count);
if (!ret)
list_add_tail(&work->list, &cm_id_priv->work_list);
@@ -1912,7 +1905,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -1956,8 +1948,7 @@
if (ret)
goto out;
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret)
cm_free_msg(msg);
@@ -2033,8 +2024,7 @@
case IB_CM_MRA_REQ_RCVD:
case IB_CM_REP_SENT:
case IB_CM_MRA_REP_RCVD:
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
/* fall through */
case IB_CM_REQ_RCVD:
case IB_CM_MRA_REQ_SENT:
@@ -2044,8 +2034,7 @@
cm_reset_to_idle(cm_id_priv);
break;
case IB_CM_DREQ_SENT:
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
/* fall through */
case IB_CM_REP_RCVD:
case IB_CM_MRA_REP_SENT:
@@ -2080,7 +2069,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
void *data;
unsigned long flags;
int ret;
@@ -2104,8 +2092,7 @@
cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv,
CM_MSG_RESPONSE_REQ, service_timeout,
private_data, private_data_len);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret)
goto error2;
cm_id->state = IB_CM_MRA_REQ_SENT;
@@ -2118,8 +2105,7 @@
cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv,
CM_MSG_RESPONSE_REP, service_timeout,
private_data, private_data_len);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret)
goto error2;
cm_id->state = IB_CM_MRA_REP_SENT;
@@ -2132,8 +2118,7 @@
cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv,
CM_MSG_RESPONSE_OTHER, service_timeout,
private_data, private_data_len);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret)
goto error2;
cm_id->lap_state = IB_CM_MRA_LAP_SENT;
@@ -2195,14 +2180,14 @@
case IB_CM_REQ_SENT:
if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_REQ ||
ib_modify_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg, timeout))
+ cm_id_priv->msg, timeout))
goto out;
cm_id_priv->id.state = IB_CM_MRA_REQ_RCVD;
break;
case IB_CM_REP_SENT:
if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_REP ||
ib_modify_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg, timeout))
+ cm_id_priv->msg, timeout))
goto out;
cm_id_priv->id.state = IB_CM_MRA_REP_RCVD;
break;
@@ -2210,7 +2195,7 @@
if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_OTHER ||
cm_id_priv->id.lap_state != IB_CM_LAP_SENT ||
ib_modify_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg, timeout))
+ cm_id_priv->msg, timeout))
goto out;
cm_id_priv->id.lap_state = IB_CM_MRA_LAP_RCVD;
break;
@@ -2273,7 +2258,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -2294,11 +2278,10 @@
cm_format_lap((struct cm_lap_msg *) msg->mad, cm_id_priv,
alternate_path, private_data, private_data_len);
- msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms;
+ msg->timeout_ms = cm_id_priv->timeout_ms;
msg->context[1] = (void *) (unsigned long) IB_CM_ESTABLISHED;
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret) {
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
cm_free_msg(msg);
@@ -2342,7 +2325,6 @@
struct cm_lap_msg *lap_msg;
struct ib_cm_lap_event_param *param;
struct ib_mad_send_buf *msg = NULL;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -2376,8 +2358,7 @@
cm_id_priv->private_data_len);
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
- if (ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr))
+ if (ib_post_send_mad(msg, NULL))
cm_free_msg(msg);
goto deref;
default:
@@ -2433,7 +2414,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -2456,8 +2436,7 @@
cm_format_apr((struct cm_apr_msg *) msg->mad, cm_id_priv, status,
info, info_length, private_data, private_data_len);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret) {
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
cm_free_msg(msg);
@@ -2496,8 +2475,7 @@
goto out;
}
cm_id_priv->id.lap_state = IB_CM_LAP_IDLE;
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
cm_id_priv->msg = NULL;
ret = atomic_inc_and_test(&cm_id_priv->work_count);
@@ -2572,7 +2550,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -2595,13 +2572,12 @@
cm_format_sidr_req((struct cm_sidr_req_msg *) msg->mad, cm_id_priv,
param);
- msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms;
+ msg->timeout_ms = cm_id_priv->timeout_ms;
msg->context[1] = (void *) (unsigned long) IB_CM_SIDR_REQ_SENT;
spin_lock_irqsave(&cm_id_priv->lock, flags);
if (cm_id->state == IB_CM_IDLE)
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
else
ret = -EINVAL;
@@ -2629,7 +2605,6 @@
param = &work->cm_event.param.sidr_req_rcvd;
param->pkey = __be16_to_cpu(sidr_req_msg->pkey);
param->listen_id = listen_id;
- param->device = work->port->mad_agent->device;
param->port = work->port->port_num;
work->cm_event.private_data = &sidr_req_msg->private_data;
}
@@ -2642,7 +2617,7 @@
struct ib_wc *wc;
unsigned long flags;
- cm_id = ib_create_cm_id(NULL, NULL);
+ cm_id = ib_create_cm_id(work->port->cm_dev->device, NULL, NULL);
if (IS_ERR(cm_id))
return PTR_ERR(cm_id);
cm_id_priv = container_of(cm_id, struct cm_id_private, id);
@@ -2666,7 +2641,8 @@
spin_unlock_irqrestore(&cm.lock, flags);
goto out; /* Duplicate message. */
}
- cur_cm_id_priv = cm_find_listen(sidr_req_msg->service_id);
+ cur_cm_id_priv = cm_find_listen(cm_id->device,
+ sidr_req_msg->service_id);
if (!cur_cm_id_priv) {
rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table);
spin_unlock_irqrestore(&cm.lock, flags);
@@ -2715,7 +2691,6 @@
{
struct cm_id_private *cm_id_priv;
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
unsigned long flags;
int ret;
@@ -2737,8 +2712,7 @@
cm_format_sidr_rep((struct cm_sidr_rep_msg *) msg->mad, cm_id_priv,
param);
- ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent,
- &msg->send_wr, &bad_send_wr);
+ ret = ib_post_send_mad(msg, NULL);
if (ret) {
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
cm_free_msg(msg);
@@ -2791,8 +2765,7 @@
goto out;
}
cm_id_priv->id.state = IB_CM_IDLE;
- ib_cancel_mad(cm_id_priv->av.port->mad_agent,
- (unsigned long) cm_id_priv->msg);
+ ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
spin_unlock_irqrestore(&cm_id_priv->lock, flags);
cm_format_sidr_rep_event(work);
@@ -2860,9 +2833,7 @@
static void cm_send_handler(struct ib_mad_agent *mad_agent,
struct ib_mad_send_wc *mad_send_wc)
{
- struct ib_mad_send_buf *msg;
-
- msg = (struct ib_mad_send_buf *)(unsigned long)mad_send_wc->wr_id;
+ struct ib_mad_send_buf *msg = mad_send_wc->send_buf;
switch (mad_send_wc->status) {
case IB_WC_SUCCESS:
@@ -3064,10 +3035,10 @@
case IB_CM_ESTABLISHED:
*qp_attr_mask = IB_QP_STATE | IB_QP_ACCESS_FLAGS |
IB_QP_PKEY_INDEX | IB_QP_PORT;
- qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE;
+ qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE |
+ IB_ACCESS_REMOTE_WRITE;
if (cm_id_priv->responder_resources)
- qp_attr->qp_access_flags |= IB_ACCESS_REMOTE_WRITE |
- IB_ACCESS_REMOTE_READ;
+ qp_attr->qp_access_flags |= IB_ACCESS_REMOTE_READ;
qp_attr->pkey_index = cm_id_priv->av.pkey_index;
qp_attr->port_num = cm_id_priv->av.port->port_num;
ret = 0;
@@ -3097,14 +3068,18 @@
case IB_CM_MRA_REP_RCVD:
case IB_CM_ESTABLISHED:
*qp_attr_mask = IB_QP_STATE | IB_QP_AV | IB_QP_PATH_MTU |
- IB_QP_DEST_QPN | IB_QP_RQ_PSN |
- IB_QP_MAX_DEST_RD_ATOMIC | IB_QP_MIN_RNR_TIMER;
+ IB_QP_DEST_QPN | IB_QP_RQ_PSN;
qp_attr->ah_attr = cm_id_priv->av.ah_attr;
qp_attr->path_mtu = cm_id_priv->path_mtu;
qp_attr->dest_qp_num = be32_to_cpu(cm_id_priv->remote_qpn);
qp_attr->rq_psn = be32_to_cpu(cm_id_priv->rq_psn);
- qp_attr->max_dest_rd_atomic = cm_id_priv->responder_resources;
- qp_attr->min_rnr_timer = 0;
+ if (cm_id_priv->qp_type == IB_QPT_RC) {
+ *qp_attr_mask |= IB_QP_MAX_DEST_RD_ATOMIC |
+ IB_QP_MIN_RNR_TIMER;
+ qp_attr->max_dest_rd_atomic =
+ cm_id_priv->responder_resources;
+ qp_attr->min_rnr_timer = 0;
+ }
if (cm_id_priv->alt_av.ah_attr.dlid) {
*qp_attr_mask |= IB_QP_ALT_PATH;
qp_attr->alt_ah_attr = cm_id_priv->alt_av.ah_attr;
@@ -3133,14 +3108,17 @@
case IB_CM_REP_SENT:
case IB_CM_MRA_REP_RCVD:
case IB_CM_ESTABLISHED:
- *qp_attr_mask = IB_QP_STATE | IB_QP_TIMEOUT | IB_QP_RETRY_CNT |
- IB_QP_RNR_RETRY | IB_QP_SQ_PSN |
- IB_QP_MAX_QP_RD_ATOMIC;
- qp_attr->timeout = cm_id_priv->local_ack_timeout;
- qp_attr->retry_cnt = cm_id_priv->retry_count;
- qp_attr->rnr_retry = cm_id_priv->rnr_retry_count;
+ *qp_attr_mask = IB_QP_STATE | IB_QP_SQ_PSN;
qp_attr->sq_psn = be32_to_cpu(cm_id_priv->sq_psn);
- qp_attr->max_rd_atomic = cm_id_priv->initiator_depth;
+ if (cm_id_priv->qp_type == IB_QPT_RC) {
+ *qp_attr_mask |= IB_QP_TIMEOUT | IB_QP_RETRY_CNT |
+ IB_QP_RNR_RETRY |
+ IB_QP_MAX_QP_RD_ATOMIC;
+ qp_attr->timeout = cm_id_priv->local_ack_timeout;
+ qp_attr->retry_cnt = cm_id_priv->retry_count;
+ qp_attr->rnr_retry = cm_id_priv->rnr_retry_count;
+ qp_attr->max_rd_atomic = cm_id_priv->initiator_depth;
+ }
if (cm_id_priv->alt_av.ah_attr.dlid) {
*qp_attr_mask |= IB_QP_PATH_MIG_STATE;
qp_attr->path_mig_state = IB_MIG_REARM;
@@ -3323,6 +3301,7 @@
flush_workqueue(cm.wq);
destroy_workqueue(cm.wq);
ib_unregister_client(&cm_client);
+ idr_destroy(&cm.local_id_table);
}
module_init(ib_cm_init);
diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h
index 813ab70..4d3aee9 100644
--- a/drivers/infiniband/core/cm_msgs.h
+++ b/drivers/infiniband/core/cm_msgs.h
@@ -186,6 +186,7 @@
req_msg->offset40 = cpu_to_be32((be32_to_cpu(
req_msg->offset40) &
0xFFFFFFF9) | 0x2);
+ break;
default:
req_msg->offset40 = cpu_to_be32(be32_to_cpu(
req_msg->offset40) &
diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index d3cf84e..5a6e449 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -514,6 +514,12 @@
u8 port_num,
struct ib_port_attr *port_attr)
{
+ if (device->node_type == IB_NODE_SWITCH) {
+ if (port_num)
+ return -EINVAL;
+ } else if (port_num < 1 || port_num > device->phys_port_cnt)
+ return -EINVAL;
+
return device->query_port(device, port_num, port_attr);
}
EXPORT_SYMBOL(ib_query_port);
@@ -583,6 +589,12 @@
u8 port_num, int port_modify_mask,
struct ib_port_modify *port_modify)
{
+ if (device->node_type == IB_NODE_SWITCH) {
+ if (port_num)
+ return -EINVAL;
+ } else if (port_num < 1 || port_num > device->phys_port_cnt)
+ return -EINVAL;
+
return device->modify_port(device, port_num, port_modify_mask,
port_modify);
}
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index a14ca87..88f9f8c 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -579,7 +579,7 @@
}
static void snoop_send(struct ib_mad_qp_info *qp_info,
- struct ib_send_wr *send_wr,
+ struct ib_mad_send_buf *send_buf,
struct ib_mad_send_wc *mad_send_wc,
int mad_snoop_flags)
{
@@ -597,7 +597,7 @@
atomic_inc(&mad_snoop_priv->refcount);
spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
mad_snoop_priv->agent.snoop_handler(&mad_snoop_priv->agent,
- send_wr, mad_send_wc);
+ send_buf, mad_send_wc);
if (atomic_dec_and_test(&mad_snoop_priv->refcount))
wake_up(&mad_snoop_priv->wait);
spin_lock_irqsave(&qp_info->snoop_lock, flags);
@@ -654,10 +654,10 @@
* Return < 0 if error
*/
static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv,
- struct ib_smp *smp,
- struct ib_send_wr *send_wr)
+ struct ib_mad_send_wr_private *mad_send_wr)
{
int ret;
+ struct ib_smp *smp = mad_send_wr->send_buf.mad;
unsigned long flags;
struct ib_mad_local_private *local;
struct ib_mad_private *mad_priv;
@@ -666,6 +666,7 @@
struct ib_device *device = mad_agent_priv->agent.device;
u8 port_num = mad_agent_priv->agent.port_num;
struct ib_wc mad_wc;
+ struct ib_send_wr *send_wr = &mad_send_wr->send_wr;
if (!smi_handle_dr_smp_send(smp, device->node_type, port_num)) {
ret = -EINVAL;
@@ -745,13 +746,7 @@
goto out;
}
- local->send_wr = *send_wr;
- local->send_wr.sg_list = local->sg_list;
- memcpy(local->sg_list, send_wr->sg_list,
- sizeof *send_wr->sg_list * send_wr->num_sge);
- local->send_wr.next = NULL;
- local->tid = send_wr->wr.ud.mad_hdr->tid;
- local->wr_id = send_wr->wr_id;
+ local->mad_send_wr = mad_send_wr;
/* Reference MAD agent until send side of local completion handled */
atomic_inc(&mad_agent_priv->refcount);
/* Queue local completion to local list */
@@ -781,17 +776,17 @@
struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
u32 remote_qpn, u16 pkey_index,
- struct ib_ah *ah, int rmpp_active,
+ int rmpp_active,
int hdr_len, int data_len,
gfp_t gfp_mask)
{
struct ib_mad_agent_private *mad_agent_priv;
- struct ib_mad_send_buf *send_buf;
+ struct ib_mad_send_wr_private *mad_send_wr;
int buf_size;
void *buf;
- mad_agent_priv = container_of(mad_agent,
- struct ib_mad_agent_private, agent);
+ mad_agent_priv = container_of(mad_agent, struct ib_mad_agent_private,
+ agent);
buf_size = get_buf_length(hdr_len, data_len);
if ((!mad_agent->rmpp_version &&
@@ -799,45 +794,40 @@
(!rmpp_active && buf_size > sizeof(struct ib_mad)))
return ERR_PTR(-EINVAL);
- buf = kmalloc(sizeof *send_buf + buf_size, gfp_mask);
+ buf = kmalloc(sizeof *mad_send_wr + buf_size, gfp_mask);
if (!buf)
return ERR_PTR(-ENOMEM);
- memset(buf, 0, sizeof *send_buf + buf_size);
+ memset(buf, 0, sizeof *mad_send_wr + buf_size);
- send_buf = buf + buf_size;
- send_buf->mad = buf;
+ mad_send_wr = buf + buf_size;
+ mad_send_wr->send_buf.mad = buf;
- send_buf->sge.addr = dma_map_single(mad_agent->device->dma_device,
- buf, buf_size, DMA_TO_DEVICE);
- pci_unmap_addr_set(send_buf, mapping, send_buf->sge.addr);
- send_buf->sge.length = buf_size;
- send_buf->sge.lkey = mad_agent->mr->lkey;
+ mad_send_wr->mad_agent_priv = mad_agent_priv;
+ mad_send_wr->sg_list[0].length = buf_size;
+ mad_send_wr->sg_list[0].lkey = mad_agent->mr->lkey;
- send_buf->send_wr.wr_id = (unsigned long) send_buf;
- send_buf->send_wr.sg_list = &send_buf->sge;
- send_buf->send_wr.num_sge = 1;
- send_buf->send_wr.opcode = IB_WR_SEND;
- send_buf->send_wr.send_flags = IB_SEND_SIGNALED;
- send_buf->send_wr.wr.ud.ah = ah;
- send_buf->send_wr.wr.ud.mad_hdr = &send_buf->mad->mad_hdr;
- send_buf->send_wr.wr.ud.remote_qpn = remote_qpn;
- send_buf->send_wr.wr.ud.remote_qkey = IB_QP_SET_QKEY;
- send_buf->send_wr.wr.ud.pkey_index = pkey_index;
+ mad_send_wr->send_wr.wr_id = (unsigned long) mad_send_wr;
+ mad_send_wr->send_wr.sg_list = mad_send_wr->sg_list;
+ mad_send_wr->send_wr.num_sge = 1;
+ mad_send_wr->send_wr.opcode = IB_WR_SEND;
+ mad_send_wr->send_wr.send_flags = IB_SEND_SIGNALED;
+ mad_send_wr->send_wr.wr.ud.remote_qpn = remote_qpn;
+ mad_send_wr->send_wr.wr.ud.remote_qkey = IB_QP_SET_QKEY;
+ mad_send_wr->send_wr.wr.ud.pkey_index = pkey_index;
if (rmpp_active) {
- struct ib_rmpp_mad *rmpp_mad;
- rmpp_mad = (struct ib_rmpp_mad *)send_buf->mad;
+ struct ib_rmpp_mad *rmpp_mad = mad_send_wr->send_buf.mad;
rmpp_mad->rmpp_hdr.paylen_newwin = cpu_to_be32(hdr_len -
- offsetof(struct ib_rmpp_mad, data) + data_len);
+ IB_MGMT_RMPP_HDR + data_len);
rmpp_mad->rmpp_hdr.rmpp_version = mad_agent->rmpp_version;
rmpp_mad->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_DATA;
ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr,
IB_MGMT_RMPP_FLAG_ACTIVE);
}
- send_buf->mad_agent = mad_agent;
+ mad_send_wr->send_buf.mad_agent = mad_agent;
atomic_inc(&mad_agent_priv->refcount);
- return send_buf;
+ return &mad_send_wr->send_buf;
}
EXPORT_SYMBOL(ib_create_send_mad);
@@ -847,10 +837,6 @@
mad_agent_priv = container_of(send_buf->mad_agent,
struct ib_mad_agent_private, agent);
-
- dma_unmap_single(send_buf->mad_agent->device->dma_device,
- pci_unmap_addr(send_buf, mapping),
- send_buf->sge.length, DMA_TO_DEVICE);
kfree(send_buf->mad);
if (atomic_dec_and_test(&mad_agent_priv->refcount))
@@ -861,8 +847,10 @@
int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr)
{
struct ib_mad_qp_info *qp_info;
- struct ib_send_wr *bad_send_wr;
struct list_head *list;
+ struct ib_send_wr *bad_send_wr;
+ struct ib_mad_agent *mad_agent;
+ struct ib_sge *sge;
unsigned long flags;
int ret;
@@ -871,10 +859,17 @@
mad_send_wr->send_wr.wr_id = (unsigned long)&mad_send_wr->mad_list;
mad_send_wr->mad_list.mad_queue = &qp_info->send_queue;
+ mad_agent = mad_send_wr->send_buf.mad_agent;
+ sge = mad_send_wr->sg_list;
+ sge->addr = dma_map_single(mad_agent->device->dma_device,
+ mad_send_wr->send_buf.mad, sge->length,
+ DMA_TO_DEVICE);
+ pci_unmap_addr_set(mad_send_wr, mapping, sge->addr);
+
spin_lock_irqsave(&qp_info->send_queue.lock, flags);
if (qp_info->send_queue.count < qp_info->send_queue.max_active) {
- ret = ib_post_send(mad_send_wr->mad_agent_priv->agent.qp,
- &mad_send_wr->send_wr, &bad_send_wr);
+ ret = ib_post_send(mad_agent->qp, &mad_send_wr->send_wr,
+ &bad_send_wr);
list = &qp_info->send_queue.list;
} else {
ret = 0;
@@ -886,6 +881,11 @@
list_add_tail(&mad_send_wr->mad_list.list, list);
}
spin_unlock_irqrestore(&qp_info->send_queue.lock, flags);
+ if (ret)
+ dma_unmap_single(mad_agent->device->dma_device,
+ pci_unmap_addr(mad_send_wr, mapping),
+ sge->length, DMA_TO_DEVICE);
+
return ret;
}
@@ -893,45 +893,28 @@
* ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated
* with the registered client
*/
-int ib_post_send_mad(struct ib_mad_agent *mad_agent,
- struct ib_send_wr *send_wr,
- struct ib_send_wr **bad_send_wr)
+int ib_post_send_mad(struct ib_mad_send_buf *send_buf,
+ struct ib_mad_send_buf **bad_send_buf)
{
- int ret = -EINVAL;
struct ib_mad_agent_private *mad_agent_priv;
-
- /* Validate supplied parameters */
- if (!bad_send_wr)
- goto error1;
-
- if (!mad_agent || !send_wr)
- goto error2;
-
- if (!mad_agent->send_handler)
- goto error2;
-
- mad_agent_priv = container_of(mad_agent,
- struct ib_mad_agent_private,
- agent);
+ struct ib_mad_send_buf *next_send_buf;
+ struct ib_mad_send_wr_private *mad_send_wr;
+ unsigned long flags;
+ int ret = -EINVAL;
/* Walk list of send WRs and post each on send list */
- while (send_wr) {
- unsigned long flags;
- struct ib_send_wr *next_send_wr;
- struct ib_mad_send_wr_private *mad_send_wr;
- struct ib_smp *smp;
+ for (; send_buf; send_buf = next_send_buf) {
- /* Validate more parameters */
- if (send_wr->num_sge > IB_MAD_SEND_REQ_MAX_SG)
- goto error2;
+ mad_send_wr = container_of(send_buf,
+ struct ib_mad_send_wr_private,
+ send_buf);
+ mad_agent_priv = mad_send_wr->mad_agent_priv;
- if (send_wr->wr.ud.timeout_ms && !mad_agent->recv_handler)
- goto error2;
-
- if (!send_wr->wr.ud.mad_hdr) {
- printk(KERN_ERR PFX "MAD header must be supplied "
- "in WR %p\n", send_wr);
- goto error2;
+ if (!send_buf->mad_agent->send_handler ||
+ (send_buf->timeout_ms &&
+ !send_buf->mad_agent->recv_handler)) {
+ ret = -EINVAL;
+ goto error;
}
/*
@@ -939,40 +922,24 @@
* current one completes, and the user modifies the work
* request associated with the completion
*/
- next_send_wr = (struct ib_send_wr *)send_wr->next;
+ next_send_buf = send_buf->next;
+ mad_send_wr->send_wr.wr.ud.ah = send_buf->ah;
- smp = (struct ib_smp *)send_wr->wr.ud.mad_hdr;
- if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) {
- ret = handle_outgoing_dr_smp(mad_agent_priv, smp,
- send_wr);
+ if (((struct ib_mad_hdr *) send_buf->mad)->mgmt_class ==
+ IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) {
+ ret = handle_outgoing_dr_smp(mad_agent_priv,
+ mad_send_wr);
if (ret < 0) /* error */
- goto error2;
+ goto error;
else if (ret == 1) /* locally consumed */
- goto next;
+ continue;
}
- /* Allocate MAD send WR tracking structure */
- mad_send_wr = kmalloc(sizeof *mad_send_wr, GFP_ATOMIC);
- if (!mad_send_wr) {
- printk(KERN_ERR PFX "No memory for "
- "ib_mad_send_wr_private\n");
- ret = -ENOMEM;
- goto error2;
- }
- memset(mad_send_wr, 0, sizeof *mad_send_wr);
-
- mad_send_wr->send_wr = *send_wr;
- mad_send_wr->send_wr.sg_list = mad_send_wr->sg_list;
- memcpy(mad_send_wr->sg_list, send_wr->sg_list,
- sizeof *send_wr->sg_list * send_wr->num_sge);
- mad_send_wr->wr_id = send_wr->wr_id;
- mad_send_wr->tid = send_wr->wr.ud.mad_hdr->tid;
- mad_send_wr->mad_agent_priv = mad_agent_priv;
+ mad_send_wr->tid = ((struct ib_mad_hdr *) send_buf->mad)->tid;
/* Timeout will be updated after send completes */
- mad_send_wr->timeout = msecs_to_jiffies(send_wr->wr.
- ud.timeout_ms);
- mad_send_wr->retries = mad_send_wr->send_wr.wr.ud.retries;
- /* One reference for each work request to QP + response */
+ mad_send_wr->timeout = msecs_to_jiffies(send_buf->timeout_ms);
+ mad_send_wr->retries = send_buf->retries;
+ /* Reference for work request to QP + response */
mad_send_wr->refcount = 1 + (mad_send_wr->timeout > 0);
mad_send_wr->status = IB_WC_SUCCESS;
@@ -995,16 +962,13 @@
list_del(&mad_send_wr->agent_list);
spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
atomic_dec(&mad_agent_priv->refcount);
- goto error2;
+ goto error;
}
-next:
- send_wr = next_send_wr;
}
return 0;
-
-error2:
- *bad_send_wr = send_wr;
-error1:
+error:
+ if (bad_send_buf)
+ *bad_send_buf = send_buf;
return ret;
}
EXPORT_SYMBOL(ib_post_send_mad);
@@ -1447,8 +1411,7 @@
* of MAD.
*/
hi_tid = be64_to_cpu(mad->mad_hdr.tid) >> 32;
- list_for_each_entry(entry, &port_priv->agent_list,
- agent_list) {
+ list_for_each_entry(entry, &port_priv->agent_list, agent_list) {
if (entry->agent.hi_tid == hi_tid) {
mad_agent = entry;
break;
@@ -1571,8 +1534,7 @@
*/
list_for_each_entry(mad_send_wr, &mad_agent_priv->send_list,
agent_list) {
- if (is_data_mad(mad_agent_priv,
- mad_send_wr->send_wr.wr.ud.mad_hdr) &&
+ if (is_data_mad(mad_agent_priv, mad_send_wr->send_buf.mad) &&
mad_send_wr->tid == tid && mad_send_wr->timeout) {
/* Verify request has not been canceled */
return (mad_send_wr->status == IB_WC_SUCCESS) ?
@@ -1628,14 +1590,14 @@
spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
/* Defined behavior is to complete response before request */
- mad_recv_wc->wc->wr_id = mad_send_wr->wr_id;
+ mad_recv_wc->wc->wr_id = (unsigned long) &mad_send_wr->send_buf;
mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent,
mad_recv_wc);
atomic_dec(&mad_agent_priv->refcount);
mad_send_wc.status = IB_WC_SUCCESS;
mad_send_wc.vendor_err = 0;
- mad_send_wc.wr_id = mad_send_wr->wr_id;
+ mad_send_wc.send_buf = &mad_send_wr->send_buf;
ib_mad_complete_send_wr(mad_send_wr, &mad_send_wc);
} else {
mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent,
@@ -1728,11 +1690,11 @@
if (ret & IB_MAD_RESULT_CONSUMED)
goto out;
if (ret & IB_MAD_RESULT_REPLY) {
- /* Send response */
- if (!agent_send(response, &recv->grh, wc,
- port_priv->device,
- port_priv->port_num))
- response = NULL;
+ agent_send_response(&response->mad.mad,
+ &recv->grh, wc,
+ port_priv->device,
+ port_priv->port_num,
+ qp_info->qp->qp_num);
goto out;
}
}
@@ -1866,15 +1828,15 @@
if (mad_send_wr->status != IB_WC_SUCCESS )
mad_send_wc->status = mad_send_wr->status;
- if (ret != IB_RMPP_RESULT_INTERNAL)
+ if (ret == IB_RMPP_RESULT_INTERNAL)
+ ib_rmpp_send_handler(mad_send_wc);
+ else
mad_agent_priv->agent.send_handler(&mad_agent_priv->agent,
mad_send_wc);
/* Release reference on agent taken when sending */
if (atomic_dec_and_test(&mad_agent_priv->refcount))
wake_up(&mad_agent_priv->wait);
-
- kfree(mad_send_wr);
return;
done:
spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
@@ -1888,6 +1850,7 @@
struct ib_mad_qp_info *qp_info;
struct ib_mad_queue *send_queue;
struct ib_send_wr *bad_send_wr;
+ struct ib_mad_send_wc mad_send_wc;
unsigned long flags;
int ret;
@@ -1898,6 +1861,9 @@
qp_info = send_queue->qp_info;
retry:
+ dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device,
+ pci_unmap_addr(mad_send_wr, mapping),
+ mad_send_wr->sg_list[0].length, DMA_TO_DEVICE);
queued_send_wr = NULL;
spin_lock_irqsave(&send_queue->lock, flags);
list_del(&mad_list->list);
@@ -1914,17 +1880,17 @@
}
spin_unlock_irqrestore(&send_queue->lock, flags);
- /* Restore client wr_id in WC and complete send */
- wc->wr_id = mad_send_wr->wr_id;
+ mad_send_wc.send_buf = &mad_send_wr->send_buf;
+ mad_send_wc.status = wc->status;
+ mad_send_wc.vendor_err = wc->vendor_err;
if (atomic_read(&qp_info->snoop_count))
- snoop_send(qp_info, &mad_send_wr->send_wr,
- (struct ib_mad_send_wc *)wc,
+ snoop_send(qp_info, &mad_send_wr->send_buf, &mad_send_wc,
IB_MAD_SNOOP_SEND_COMPLETIONS);
- ib_mad_complete_send_wr(mad_send_wr, (struct ib_mad_send_wc *)wc);
+ ib_mad_complete_send_wr(mad_send_wr, &mad_send_wc);
if (queued_send_wr) {
ret = ib_post_send(qp_info->qp, &queued_send_wr->send_wr,
- &bad_send_wr);
+ &bad_send_wr);
if (ret) {
printk(KERN_ERR PFX "ib_post_send failed: %d\n", ret);
mad_send_wr = queued_send_wr;
@@ -2066,38 +2032,37 @@
list_for_each_entry_safe(mad_send_wr, temp_mad_send_wr,
&cancel_list, agent_list) {
- mad_send_wc.wr_id = mad_send_wr->wr_id;
+ mad_send_wc.send_buf = &mad_send_wr->send_buf;
+ list_del(&mad_send_wr->agent_list);
mad_agent_priv->agent.send_handler(&mad_agent_priv->agent,
&mad_send_wc);
-
- list_del(&mad_send_wr->agent_list);
- kfree(mad_send_wr);
atomic_dec(&mad_agent_priv->refcount);
}
}
static struct ib_mad_send_wr_private*
-find_send_by_wr_id(struct ib_mad_agent_private *mad_agent_priv, u64 wr_id)
+find_send_wr(struct ib_mad_agent_private *mad_agent_priv,
+ struct ib_mad_send_buf *send_buf)
{
struct ib_mad_send_wr_private *mad_send_wr;
list_for_each_entry(mad_send_wr, &mad_agent_priv->wait_list,
agent_list) {
- if (mad_send_wr->wr_id == wr_id)
+ if (&mad_send_wr->send_buf == send_buf)
return mad_send_wr;
}
list_for_each_entry(mad_send_wr, &mad_agent_priv->send_list,
agent_list) {
- if (is_data_mad(mad_agent_priv,
- mad_send_wr->send_wr.wr.ud.mad_hdr) &&
- mad_send_wr->wr_id == wr_id)
+ if (is_data_mad(mad_agent_priv, mad_send_wr->send_buf.mad) &&
+ &mad_send_wr->send_buf == send_buf)
return mad_send_wr;
}
return NULL;
}
-int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms)
+int ib_modify_mad(struct ib_mad_agent *mad_agent,
+ struct ib_mad_send_buf *send_buf, u32 timeout_ms)
{
struct ib_mad_agent_private *mad_agent_priv;
struct ib_mad_send_wr_private *mad_send_wr;
@@ -2107,7 +2072,7 @@
mad_agent_priv = container_of(mad_agent, struct ib_mad_agent_private,
agent);
spin_lock_irqsave(&mad_agent_priv->lock, flags);
- mad_send_wr = find_send_by_wr_id(mad_agent_priv, wr_id);
+ mad_send_wr = find_send_wr(mad_agent_priv, send_buf);
if (!mad_send_wr || mad_send_wr->status != IB_WC_SUCCESS) {
spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
return -EINVAL;
@@ -2119,7 +2084,7 @@
mad_send_wr->refcount -= (mad_send_wr->timeout > 0);
}
- mad_send_wr->send_wr.wr.ud.timeout_ms = timeout_ms;
+ mad_send_wr->send_buf.timeout_ms = timeout_ms;
if (active)
mad_send_wr->timeout = msecs_to_jiffies(timeout_ms);
else
@@ -2130,9 +2095,10 @@
}
EXPORT_SYMBOL(ib_modify_mad);
-void ib_cancel_mad(struct ib_mad_agent *mad_agent, u64 wr_id)
+void ib_cancel_mad(struct ib_mad_agent *mad_agent,
+ struct ib_mad_send_buf *send_buf)
{
- ib_modify_mad(mad_agent, wr_id, 0);
+ ib_modify_mad(mad_agent, send_buf, 0);
}
EXPORT_SYMBOL(ib_cancel_mad);
@@ -2166,10 +2132,9 @@
* Defined behavior is to complete response
* before request
*/
- build_smp_wc(local->wr_id,
+ build_smp_wc((unsigned long) local->mad_send_wr,
be16_to_cpu(IB_LID_PERMISSIVE),
- 0 /* pkey index */,
- recv_mad_agent->agent.port_num, &wc);
+ 0, recv_mad_agent->agent.port_num, &wc);
local->mad_priv->header.recv_wc.wc = &wc;
local->mad_priv->header.recv_wc.mad_len =
@@ -2196,11 +2161,11 @@
/* Complete send */
mad_send_wc.status = IB_WC_SUCCESS;
mad_send_wc.vendor_err = 0;
- mad_send_wc.wr_id = local->wr_id;
+ mad_send_wc.send_buf = &local->mad_send_wr->send_buf;
if (atomic_read(&mad_agent_priv->qp_info->snoop_count))
- snoop_send(mad_agent_priv->qp_info, &local->send_wr,
- &mad_send_wc,
- IB_MAD_SNOOP_SEND_COMPLETIONS);
+ snoop_send(mad_agent_priv->qp_info,
+ &local->mad_send_wr->send_buf,
+ &mad_send_wc, IB_MAD_SNOOP_SEND_COMPLETIONS);
mad_agent_priv->agent.send_handler(&mad_agent_priv->agent,
&mad_send_wc);
@@ -2221,8 +2186,7 @@
if (!mad_send_wr->retries--)
return -ETIMEDOUT;
- mad_send_wr->timeout = msecs_to_jiffies(mad_send_wr->send_wr.
- wr.ud.timeout_ms);
+ mad_send_wr->timeout = msecs_to_jiffies(mad_send_wr->send_buf.timeout_ms);
if (mad_send_wr->mad_agent_priv->agent.rmpp_version) {
ret = ib_retry_rmpp(mad_send_wr);
@@ -2285,11 +2249,10 @@
mad_send_wc.status = IB_WC_RESP_TIMEOUT_ERR;
else
mad_send_wc.status = mad_send_wr->status;
- mad_send_wc.wr_id = mad_send_wr->wr_id;
+ mad_send_wc.send_buf = &mad_send_wr->send_buf;
mad_agent_priv->agent.send_handler(&mad_agent_priv->agent,
&mad_send_wc);
- kfree(mad_send_wr);
atomic_dec(&mad_agent_priv->refcount);
spin_lock_irqsave(&mad_agent_priv->lock, flags);
}
@@ -2683,40 +2646,47 @@
static void ib_mad_init_device(struct ib_device *device)
{
- int num_ports, cur_port, i;
+ int start, end, i;
if (device->node_type == IB_NODE_SWITCH) {
- num_ports = 1;
- cur_port = 0;
+ start = 0;
+ end = 0;
} else {
- num_ports = device->phys_port_cnt;
- cur_port = 1;
+ start = 1;
+ end = device->phys_port_cnt;
}
- for (i = 0; i < num_ports; i++, cur_port++) {
- if (ib_mad_port_open(device, cur_port)) {
+
+ for (i = start; i <= end; i++) {
+ if (ib_mad_port_open(device, i)) {
printk(KERN_ERR PFX "Couldn't open %s port %d\n",
- device->name, cur_port);
- goto error_device_open;
+ device->name, i);
+ goto error;
}
- if (ib_agent_port_open(device, cur_port)) {
+ if (ib_agent_port_open(device, i)) {
printk(KERN_ERR PFX "Couldn't open %s port %d "
"for agents\n",
- device->name, cur_port);
- goto error_device_open;
+ device->name, i);
+ goto error_agent;
}
}
return;
-error_device_open:
- while (i > 0) {
- cur_port--;
- if (ib_agent_port_close(device, cur_port))
+error_agent:
+ if (ib_mad_port_close(device, i))
+ printk(KERN_ERR PFX "Couldn't close %s port %d\n",
+ device->name, i);
+
+error:
+ i--;
+
+ while (i >= start) {
+ if (ib_agent_port_close(device, i))
printk(KERN_ERR PFX "Couldn't close %s port %d "
"for agents\n",
- device->name, cur_port);
- if (ib_mad_port_close(device, cur_port))
+ device->name, i);
+ if (ib_mad_port_close(device, i))
printk(KERN_ERR PFX "Couldn't close %s port %d\n",
- device->name, cur_port);
+ device->name, i);
i--;
}
}
@@ -2754,7 +2724,6 @@
int ret;
spin_lock_init(&ib_mad_port_list_lock);
- spin_lock_init(&ib_agent_port_list_lock);
ib_mad_cache = kmem_cache_create("ib_mad",
sizeof(struct ib_mad_private),
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index f1ba794..570f786 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -118,9 +118,10 @@
struct ib_mad_list_head mad_list;
struct list_head agent_list;
struct ib_mad_agent_private *mad_agent_priv;
+ struct ib_mad_send_buf send_buf;
+ DECLARE_PCI_UNMAP_ADDR(mapping)
struct ib_send_wr send_wr;
struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG];
- u64 wr_id; /* client WR ID */
__be64 tid;
unsigned long timeout;
int retries;
@@ -141,10 +142,7 @@
struct list_head completion_list;
struct ib_mad_private *mad_priv;
struct ib_mad_agent_private *recv_mad_agent;
- struct ib_send_wr send_wr;
- struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG];
- u64 wr_id; /* client WR ID */
- __be64 tid;
+ struct ib_mad_send_wr_private *mad_send_wr;
};
struct ib_mad_mgmt_method_table {
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index e23836d..3249e1d 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -103,12 +103,12 @@
static int data_offset(u8 mgmt_class)
{
if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM)
- return offsetof(struct ib_sa_mad, data);
+ return IB_MGMT_SA_HDR;
else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) &&
(mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END))
- return offsetof(struct ib_vendor_mad, data);
+ return IB_MGMT_VENDOR_HDR;
else
- return offsetof(struct ib_rmpp_mad, data);
+ return IB_MGMT_RMPP_HDR;
}
static void format_ack(struct ib_rmpp_mad *ack,
@@ -135,55 +135,52 @@
struct ib_mad_recv_wc *recv_wc)
{
struct ib_mad_send_buf *msg;
- struct ib_send_wr *bad_send_wr;
- int hdr_len, ret;
+ int ret;
- hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr);
msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp,
- recv_wc->wc->pkey_index, rmpp_recv->ah, 1,
- hdr_len, sizeof(struct ib_rmpp_mad) - hdr_len,
- GFP_KERNEL);
+ recv_wc->wc->pkey_index, 1, IB_MGMT_RMPP_HDR,
+ IB_MGMT_RMPP_DATA, GFP_KERNEL);
if (!msg)
return;
- format_ack((struct ib_rmpp_mad *) msg->mad,
- (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, rmpp_recv);
- ret = ib_post_send_mad(&rmpp_recv->agent->agent, &msg->send_wr,
- &bad_send_wr);
+ format_ack(msg->mad, (struct ib_rmpp_mad *) recv_wc->recv_buf.mad,
+ rmpp_recv);
+ msg->ah = rmpp_recv->ah;
+ ret = ib_post_send_mad(msg, NULL);
if (ret)
ib_free_send_mad(msg);
}
-static int alloc_response_msg(struct ib_mad_agent *agent,
- struct ib_mad_recv_wc *recv_wc,
- struct ib_mad_send_buf **msg)
+static struct ib_mad_send_buf *alloc_response_msg(struct ib_mad_agent *agent,
+ struct ib_mad_recv_wc *recv_wc)
{
- struct ib_mad_send_buf *m;
+ struct ib_mad_send_buf *msg;
struct ib_ah *ah;
- int hdr_len;
ah = ib_create_ah_from_wc(agent->qp->pd, recv_wc->wc,
recv_wc->recv_buf.grh, agent->port_num);
if (IS_ERR(ah))
- return PTR_ERR(ah);
+ return (void *) ah;
- hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr);
- m = ib_create_send_mad(agent, recv_wc->wc->src_qp,
- recv_wc->wc->pkey_index, ah, 1, hdr_len,
- sizeof(struct ib_rmpp_mad) - hdr_len,
- GFP_KERNEL);
- if (IS_ERR(m)) {
+ msg = ib_create_send_mad(agent, recv_wc->wc->src_qp,
+ recv_wc->wc->pkey_index, 1,
+ IB_MGMT_RMPP_HDR, IB_MGMT_RMPP_DATA,
+ GFP_KERNEL);
+ if (IS_ERR(msg))
ib_destroy_ah(ah);
- return PTR_ERR(m);
- }
- *msg = m;
- return 0;
+ else
+ msg->ah = ah;
+
+ return msg;
}
-static void free_msg(struct ib_mad_send_buf *msg)
+void ib_rmpp_send_handler(struct ib_mad_send_wc *mad_send_wc)
{
- ib_destroy_ah(msg->send_wr.wr.ud.ah);
- ib_free_send_mad(msg);
+ struct ib_rmpp_mad *rmpp_mad = mad_send_wc->send_buf->mad;
+
+ if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_ACK)
+ ib_destroy_ah(mad_send_wc->send_buf->ah);
+ ib_free_send_mad(mad_send_wc->send_buf);
}
static void nack_recv(struct ib_mad_agent_private *agent,
@@ -191,14 +188,13 @@
{
struct ib_mad_send_buf *msg;
struct ib_rmpp_mad *rmpp_mad;
- struct ib_send_wr *bad_send_wr;
int ret;
- ret = alloc_response_msg(&agent->agent, recv_wc, &msg);
- if (ret)
+ msg = alloc_response_msg(&agent->agent, recv_wc);
+ if (IS_ERR(msg))
return;
- rmpp_mad = (struct ib_rmpp_mad *) msg->mad;
+ rmpp_mad = msg->mad;
memcpy(rmpp_mad, recv_wc->recv_buf.mad,
data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class));
@@ -210,9 +206,11 @@
rmpp_mad->rmpp_hdr.seg_num = 0;
rmpp_mad->rmpp_hdr.paylen_newwin = 0;
- ret = ib_post_send_mad(&agent->agent, &msg->send_wr, &bad_send_wr);
- if (ret)
- free_msg(msg);
+ ret = ib_post_send_mad(msg, NULL);
+ if (ret) {
+ ib_destroy_ah(msg->ah);
+ ib_free_send_mad(msg);
+ }
}
static void recv_timeout_handler(void *data)
@@ -585,7 +583,7 @@
int timeout;
u32 paylen;
- rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr;
+ rmpp_mad = mad_send_wr->send_buf.mad;
ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE);
rmpp_mad->rmpp_hdr.seg_num = cpu_to_be32(mad_send_wr->seg_num);
@@ -612,7 +610,7 @@
}
/* 2 seconds for an ACK until we can find the packet lifetime */
- timeout = mad_send_wr->send_wr.wr.ud.timeout_ms;
+ timeout = mad_send_wr->send_buf.timeout_ms;
if (!timeout || timeout > 2000)
mad_send_wr->timeout = msecs_to_jiffies(2000);
mad_send_wr->seg_num++;
@@ -640,7 +638,7 @@
wc.status = IB_WC_REM_ABORT_ERR;
wc.vendor_err = rmpp_status;
- wc.wr_id = mad_send_wr->wr_id;
+ wc.send_buf = &mad_send_wr->send_buf;
ib_mad_complete_send_wr(mad_send_wr, &wc);
return;
out:
@@ -694,12 +692,12 @@
if (seg_num > mad_send_wr->last_ack) {
mad_send_wr->last_ack = seg_num;
- mad_send_wr->retries = mad_send_wr->send_wr.wr.ud.retries;
+ mad_send_wr->retries = mad_send_wr->send_buf.retries;
}
mad_send_wr->newwin = newwin;
if (mad_send_wr->last_ack == mad_send_wr->total_seg) {
/* If no response is expected, the ACK completes the send */
- if (!mad_send_wr->send_wr.wr.ud.timeout_ms) {
+ if (!mad_send_wr->send_buf.timeout_ms) {
struct ib_mad_send_wc wc;
ib_mark_mad_done(mad_send_wr);
@@ -707,13 +705,13 @@
wc.status = IB_WC_SUCCESS;
wc.vendor_err = 0;
- wc.wr_id = mad_send_wr->wr_id;
+ wc.send_buf = &mad_send_wr->send_buf;
ib_mad_complete_send_wr(mad_send_wr, &wc);
return;
}
if (mad_send_wr->refcount == 1)
- ib_reset_mad_timeout(mad_send_wr, mad_send_wr->
- send_wr.wr.ud.timeout_ms);
+ ib_reset_mad_timeout(mad_send_wr,
+ mad_send_wr->send_buf.timeout_ms);
} else if (mad_send_wr->refcount == 1 &&
mad_send_wr->seg_num < mad_send_wr->newwin &&
mad_send_wr->seg_num <= mad_send_wr->total_seg) {
@@ -842,7 +840,7 @@
struct ib_rmpp_mad *rmpp_mad;
int i, total_len, ret;
- rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr;
+ rmpp_mad = mad_send_wr->send_buf.mad;
if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
IB_MGMT_RMPP_FLAG_ACTIVE))
return IB_RMPP_RESULT_UNHANDLED;
@@ -863,7 +861,7 @@
mad_send_wr->total_seg = (total_len - mad_send_wr->data_offset) /
(sizeof(struct ib_rmpp_mad) - mad_send_wr->data_offset);
- mad_send_wr->pad = total_len - offsetof(struct ib_rmpp_mad, data) -
+ mad_send_wr->pad = total_len - IB_MGMT_RMPP_HDR -
be32_to_cpu(rmpp_mad->rmpp_hdr.paylen_newwin);
/* We need to wait for the final ACK even if there isn't a response */
@@ -878,23 +876,15 @@
struct ib_mad_send_wc *mad_send_wc)
{
struct ib_rmpp_mad *rmpp_mad;
- struct ib_mad_send_buf *msg;
int ret;
- rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr;
+ rmpp_mad = mad_send_wr->send_buf.mad;
if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
IB_MGMT_RMPP_FLAG_ACTIVE))
return IB_RMPP_RESULT_UNHANDLED; /* RMPP not active */
- if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA) {
- msg = (struct ib_mad_send_buf *) (unsigned long)
- mad_send_wc->wr_id;
- if (rmpp_mad->rmpp_hdr.rmpp_type == IB_MGMT_RMPP_TYPE_ACK)
- ib_free_send_mad(msg);
- else
- free_msg(msg);
+ if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA)
return IB_RMPP_RESULT_INTERNAL; /* ACK, STOP, or ABORT */
- }
if (mad_send_wc->status != IB_WC_SUCCESS ||
mad_send_wr->status != IB_WC_SUCCESS)
@@ -905,7 +895,7 @@
if (mad_send_wr->last_ack == mad_send_wr->total_seg) {
mad_send_wr->timeout =
- msecs_to_jiffies(mad_send_wr->send_wr.wr.ud.timeout_ms);
+ msecs_to_jiffies(mad_send_wr->send_buf.timeout_ms);
return IB_RMPP_RESULT_PROCESSED; /* Send done */
}
@@ -926,7 +916,7 @@
struct ib_rmpp_mad *rmpp_mad;
int ret;
- rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr;
+ rmpp_mad = mad_send_wr->send_buf.mad;
if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
IB_MGMT_RMPP_FLAG_ACTIVE))
return IB_RMPP_RESULT_UNHANDLED; /* RMPP not active */
diff --git a/drivers/infiniband/core/mad_rmpp.h b/drivers/infiniband/core/mad_rmpp.h
index c4924df..f0616fd 100644
--- a/drivers/infiniband/core/mad_rmpp.h
+++ b/drivers/infiniband/core/mad_rmpp.h
@@ -51,6 +51,8 @@
int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr,
struct ib_mad_send_wc *mad_send_wc);
+void ib_rmpp_send_handler(struct ib_mad_send_wc *mad_send_wc);
+
void ib_cancel_rmpp_recvs(struct ib_mad_agent_private *agent);
int ib_retry_rmpp(struct ib_mad_send_wr_private *mad_send_wr);
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index 2626182..acda7d6 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -43,6 +43,7 @@
#include <linux/dma-mapping.h>
#include <linux/kref.h>
#include <linux/idr.h>
+#include <linux/workqueue.h>
#include <rdma/ib_pack.h>
#include <rdma/ib_sa.h>
@@ -73,11 +74,10 @@
struct ib_sa_query {
void (*callback)(struct ib_sa_query *, int, struct ib_sa_mad *);
void (*release)(struct ib_sa_query *);
- struct ib_sa_port *port;
- struct ib_sa_mad *mad;
- struct ib_sa_sm_ah *sm_ah;
- DECLARE_PCI_UNMAP_ADDR(mapping)
- int id;
+ struct ib_sa_port *port;
+ struct ib_mad_send_buf *mad_buf;
+ struct ib_sa_sm_ah *sm_ah;
+ int id;
};
struct ib_sa_service_query {
@@ -426,6 +426,7 @@
{
unsigned long flags;
struct ib_mad_agent *agent;
+ struct ib_mad_send_buf *mad_buf;
spin_lock_irqsave(&idr_lock, flags);
if (idr_find(&query_idr, id) != query) {
@@ -433,9 +434,10 @@
return;
}
agent = query->port->agent;
+ mad_buf = query->mad_buf;
spin_unlock_irqrestore(&idr_lock, flags);
- ib_cancel_mad(agent, id);
+ ib_cancel_mad(agent, mad_buf);
}
EXPORT_SYMBOL(ib_sa_cancel_query);
@@ -457,71 +459,46 @@
static int send_mad(struct ib_sa_query *query, int timeout_ms)
{
- struct ib_sa_port *port = query->port;
unsigned long flags;
- int ret;
- struct ib_sge gather_list;
- struct ib_send_wr *bad_wr, wr = {
- .opcode = IB_WR_SEND,
- .sg_list = &gather_list,
- .num_sge = 1,
- .send_flags = IB_SEND_SIGNALED,
- .wr = {
- .ud = {
- .mad_hdr = &query->mad->mad_hdr,
- .remote_qpn = 1,
- .remote_qkey = IB_QP1_QKEY,
- .timeout_ms = timeout_ms,
- }
- }
- };
+ int ret, id;
retry:
if (!idr_pre_get(&query_idr, GFP_ATOMIC))
return -ENOMEM;
spin_lock_irqsave(&idr_lock, flags);
- ret = idr_get_new(&query_idr, query, &query->id);
+ ret = idr_get_new(&query_idr, query, &id);
spin_unlock_irqrestore(&idr_lock, flags);
if (ret == -EAGAIN)
goto retry;
if (ret)
return ret;
- wr.wr_id = query->id;
+ query->mad_buf->timeout_ms = timeout_ms;
+ query->mad_buf->context[0] = query;
+ query->id = id;
- spin_lock_irqsave(&port->ah_lock, flags);
- kref_get(&port->sm_ah->ref);
- query->sm_ah = port->sm_ah;
- wr.wr.ud.ah = port->sm_ah->ah;
- spin_unlock_irqrestore(&port->ah_lock, flags);
+ spin_lock_irqsave(&query->port->ah_lock, flags);
+ kref_get(&query->port->sm_ah->ref);
+ query->sm_ah = query->port->sm_ah;
+ spin_unlock_irqrestore(&query->port->ah_lock, flags);
- gather_list.addr = dma_map_single(port->agent->device->dma_device,
- query->mad,
- sizeof (struct ib_sa_mad),
- DMA_TO_DEVICE);
- gather_list.length = sizeof (struct ib_sa_mad);
- gather_list.lkey = port->agent->mr->lkey;
- pci_unmap_addr_set(query, mapping, gather_list.addr);
+ query->mad_buf->ah = query->sm_ah->ah;
- ret = ib_post_send_mad(port->agent, &wr, &bad_wr);
+ ret = ib_post_send_mad(query->mad_buf, NULL);
if (ret) {
- dma_unmap_single(port->agent->device->dma_device,
- pci_unmap_addr(query, mapping),
- sizeof (struct ib_sa_mad),
- DMA_TO_DEVICE);
- kref_put(&query->sm_ah->ref, free_sm_ah);
spin_lock_irqsave(&idr_lock, flags);
- idr_remove(&query_idr, query->id);
+ idr_remove(&query_idr, id);
spin_unlock_irqrestore(&idr_lock, flags);
+
+ kref_put(&query->sm_ah->ref, free_sm_ah);
}
/*
* It's not safe to dereference query any more, because the
* send may already have completed and freed the query in
- * another context. So use wr.wr_id, which has a copy of the
- * query's id.
+ * another context.
*/
- return ret ? ret : wr.wr_id;
+ return ret ? ret : id;
}
static void ib_sa_path_rec_callback(struct ib_sa_query *sa_query,
@@ -543,7 +520,6 @@
static void ib_sa_path_rec_release(struct ib_sa_query *sa_query)
{
- kfree(sa_query->mad);
kfree(container_of(sa_query, struct ib_sa_path_query, sa_query));
}
@@ -583,44 +559,59 @@
{
struct ib_sa_path_query *query;
struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
- struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port];
- struct ib_mad_agent *agent = port->agent;
+ struct ib_sa_port *port;
+ struct ib_mad_agent *agent;
+ struct ib_sa_mad *mad;
int ret;
+ if (!sa_dev)
+ return -ENODEV;
+
+ port = &sa_dev->port[port_num - sa_dev->start_port];
+ agent = port->agent;
+
query = kmalloc(sizeof *query, gfp_mask);
if (!query)
return -ENOMEM;
- query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask);
- if (!query->sa_query.mad) {
- kfree(query);
- return -ENOMEM;
+
+ query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0,
+ 0, IB_MGMT_SA_HDR,
+ IB_MGMT_SA_DATA, gfp_mask);
+ if (!query->sa_query.mad_buf) {
+ ret = -ENOMEM;
+ goto err1;
}
query->callback = callback;
query->context = context;
- init_mad(query->sa_query.mad, agent);
+ mad = query->sa_query.mad_buf->mad;
+ init_mad(mad, agent);
- query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL;
- query->sa_query.release = ib_sa_path_rec_release;
- query->sa_query.port = port;
- query->sa_query.mad->mad_hdr.method = IB_MGMT_METHOD_GET;
- query->sa_query.mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_PATH_REC);
- query->sa_query.mad->sa_hdr.comp_mask = comp_mask;
+ query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL;
+ query->sa_query.release = ib_sa_path_rec_release;
+ query->sa_query.port = port;
+ mad->mad_hdr.method = IB_MGMT_METHOD_GET;
+ mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_PATH_REC);
+ mad->sa_hdr.comp_mask = comp_mask;
- ib_pack(path_rec_table, ARRAY_SIZE(path_rec_table),
- rec, query->sa_query.mad->data);
+ ib_pack(path_rec_table, ARRAY_SIZE(path_rec_table), rec, mad->data);
*sa_query = &query->sa_query;
ret = send_mad(&query->sa_query, timeout_ms);
- if (ret < 0) {
- *sa_query = NULL;
- kfree(query->sa_query.mad);
- kfree(query);
- }
+ if (ret < 0)
+ goto err2;
return ret;
+
+err2:
+ *sa_query = NULL;
+ ib_free_send_mad(query->sa_query.mad_buf);
+
+err1:
+ kfree(query);
+ return ret;
}
EXPORT_SYMBOL(ib_sa_path_rec_get);
@@ -643,7 +634,6 @@
static void ib_sa_service_rec_release(struct ib_sa_query *sa_query)
{
- kfree(sa_query->mad);
kfree(container_of(sa_query, struct ib_sa_service_query, sa_query));
}
@@ -685,10 +675,17 @@
{
struct ib_sa_service_query *query;
struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
- struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port];
- struct ib_mad_agent *agent = port->agent;
+ struct ib_sa_port *port;
+ struct ib_mad_agent *agent;
+ struct ib_sa_mad *mad;
int ret;
+ if (!sa_dev)
+ return -ENODEV;
+
+ port = &sa_dev->port[port_num - sa_dev->start_port];
+ agent = port->agent;
+
if (method != IB_MGMT_METHOD_GET &&
method != IB_MGMT_METHOD_SET &&
method != IB_SA_METHOD_DELETE)
@@ -697,38 +694,46 @@
query = kmalloc(sizeof *query, gfp_mask);
if (!query)
return -ENOMEM;
- query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask);
- if (!query->sa_query.mad) {
- kfree(query);
- return -ENOMEM;
+
+ query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0,
+ 0, IB_MGMT_SA_HDR,
+ IB_MGMT_SA_DATA, gfp_mask);
+ if (!query->sa_query.mad_buf) {
+ ret = -ENOMEM;
+ goto err1;
}
query->callback = callback;
query->context = context;
- init_mad(query->sa_query.mad, agent);
+ mad = query->sa_query.mad_buf->mad;
+ init_mad(mad, agent);
- query->sa_query.callback = callback ? ib_sa_service_rec_callback : NULL;
- query->sa_query.release = ib_sa_service_rec_release;
- query->sa_query.port = port;
- query->sa_query.mad->mad_hdr.method = method;
- query->sa_query.mad->mad_hdr.attr_id =
- cpu_to_be16(IB_SA_ATTR_SERVICE_REC);
- query->sa_query.mad->sa_hdr.comp_mask = comp_mask;
+ query->sa_query.callback = callback ? ib_sa_service_rec_callback : NULL;
+ query->sa_query.release = ib_sa_service_rec_release;
+ query->sa_query.port = port;
+ mad->mad_hdr.method = method;
+ mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_SERVICE_REC);
+ mad->sa_hdr.comp_mask = comp_mask;
ib_pack(service_rec_table, ARRAY_SIZE(service_rec_table),
- rec, query->sa_query.mad->data);
+ rec, mad->data);
*sa_query = &query->sa_query;
ret = send_mad(&query->sa_query, timeout_ms);
- if (ret < 0) {
- *sa_query = NULL;
- kfree(query->sa_query.mad);
- kfree(query);
- }
+ if (ret < 0)
+ goto err2;
return ret;
+
+err2:
+ *sa_query = NULL;
+ ib_free_send_mad(query->sa_query.mad_buf);
+
+err1:
+ kfree(query);
+ return ret;
}
EXPORT_SYMBOL(ib_sa_service_rec_query);
@@ -751,7 +756,6 @@
static void ib_sa_mcmember_rec_release(struct ib_sa_query *sa_query)
{
- kfree(sa_query->mad);
kfree(container_of(sa_query, struct ib_sa_mcmember_query, sa_query));
}
@@ -768,60 +772,69 @@
{
struct ib_sa_mcmember_query *query;
struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
- struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port];
- struct ib_mad_agent *agent = port->agent;
+ struct ib_sa_port *port;
+ struct ib_mad_agent *agent;
+ struct ib_sa_mad *mad;
int ret;
+ if (!sa_dev)
+ return -ENODEV;
+
+ port = &sa_dev->port[port_num - sa_dev->start_port];
+ agent = port->agent;
+
query = kmalloc(sizeof *query, gfp_mask);
if (!query)
return -ENOMEM;
- query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask);
- if (!query->sa_query.mad) {
- kfree(query);
- return -ENOMEM;
+
+ query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0,
+ 0, IB_MGMT_SA_HDR,
+ IB_MGMT_SA_DATA, gfp_mask);
+ if (!query->sa_query.mad_buf) {
+ ret = -ENOMEM;
+ goto err1;
}
query->callback = callback;
query->context = context;
- init_mad(query->sa_query.mad, agent);
+ mad = query->sa_query.mad_buf->mad;
+ init_mad(mad, agent);
- query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL;
- query->sa_query.release = ib_sa_mcmember_rec_release;
- query->sa_query.port = port;
- query->sa_query.mad->mad_hdr.method = method;
- query->sa_query.mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_MC_MEMBER_REC);
- query->sa_query.mad->sa_hdr.comp_mask = comp_mask;
+ query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL;
+ query->sa_query.release = ib_sa_mcmember_rec_release;
+ query->sa_query.port = port;
+ mad->mad_hdr.method = method;
+ mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_MC_MEMBER_REC);
+ mad->sa_hdr.comp_mask = comp_mask;
ib_pack(mcmember_rec_table, ARRAY_SIZE(mcmember_rec_table),
- rec, query->sa_query.mad->data);
+ rec, mad->data);
*sa_query = &query->sa_query;
ret = send_mad(&query->sa_query, timeout_ms);
- if (ret < 0) {
- *sa_query = NULL;
- kfree(query->sa_query.mad);
- kfree(query);
- }
+ if (ret < 0)
+ goto err2;
return ret;
+
+err2:
+ *sa_query = NULL;
+ ib_free_send_mad(query->sa_query.mad_buf);
+
+err1:
+ kfree(query);
+ return ret;
}
EXPORT_SYMBOL(ib_sa_mcmember_rec_query);
static void send_handler(struct ib_mad_agent *agent,
struct ib_mad_send_wc *mad_send_wc)
{
- struct ib_sa_query *query;
+ struct ib_sa_query *query = mad_send_wc->send_buf->context[0];
unsigned long flags;
- spin_lock_irqsave(&idr_lock, flags);
- query = idr_find(&query_idr, mad_send_wc->wr_id);
- spin_unlock_irqrestore(&idr_lock, flags);
-
- if (!query)
- return;
-
if (query->callback)
switch (mad_send_wc->status) {
case IB_WC_SUCCESS:
@@ -838,30 +851,25 @@
break;
}
- dma_unmap_single(agent->device->dma_device,
- pci_unmap_addr(query, mapping),
- sizeof (struct ib_sa_mad),
- DMA_TO_DEVICE);
- kref_put(&query->sm_ah->ref, free_sm_ah);
-
- query->release(query);
-
spin_lock_irqsave(&idr_lock, flags);
- idr_remove(&query_idr, mad_send_wc->wr_id);
+ idr_remove(&query_idr, query->id);
spin_unlock_irqrestore(&idr_lock, flags);
+
+ ib_free_send_mad(mad_send_wc->send_buf);
+ kref_put(&query->sm_ah->ref, free_sm_ah);
+ query->release(query);
}
static void recv_handler(struct ib_mad_agent *mad_agent,
struct ib_mad_recv_wc *mad_recv_wc)
{
struct ib_sa_query *query;
- unsigned long flags;
+ struct ib_mad_send_buf *mad_buf;
- spin_lock_irqsave(&idr_lock, flags);
- query = idr_find(&query_idr, mad_recv_wc->wc->wr_id);
- spin_unlock_irqrestore(&idr_lock, flags);
+ mad_buf = (void *) (unsigned long) mad_recv_wc->wc->wr_id;
+ query = mad_buf->context[0];
- if (query && query->callback) {
+ if (query->callback) {
if (mad_recv_wc->wc->status == IB_WC_SUCCESS)
query->callback(query,
mad_recv_wc->recv_buf.mad->mad_hdr.status ?
@@ -975,6 +983,7 @@
static void __exit ib_sa_cleanup(void)
{
ib_unregister_client(&sa_client);
+ idr_destroy(&query_idr);
}
module_init(ib_sa_init);
diff --git a/drivers/infiniband/core/smi.h b/drivers/infiniband/core/smi.h
index db25503..2b3c401 100644
--- a/drivers/infiniband/core/smi.h
+++ b/drivers/infiniband/core/smi.h
@@ -39,6 +39,8 @@
#ifndef __SMI_H_
#define __SMI_H_
+#include <rdma/ib_smi.h>
+
int smi_handle_dr_smp_recv(struct ib_smp *smp,
u8 node_type,
int port_num,
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 211ba32..7ce7a6c 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -65,6 +65,11 @@
int index;
};
+static inline int ibdev_is_alive(const struct ib_device *dev)
+{
+ return dev->reg_state == IB_DEV_REGISTERED;
+}
+
static ssize_t port_attr_show(struct kobject *kobj,
struct attribute *attr, char *buf)
{
@@ -74,6 +79,8 @@
if (!port_attr->show)
return -EIO;
+ if (!ibdev_is_alive(p->ibdev))
+ return -ENODEV;
return port_attr->show(p, port_attr, buf);
}
@@ -581,6 +588,9 @@
{
struct ib_device *dev = container_of(cdev, struct ib_device, class_dev);
+ if (!ibdev_is_alive(dev))
+ return -ENODEV;
+
switch (dev->node_type) {
case IB_NODE_CA: return sprintf(buf, "%d: CA\n", dev->node_type);
case IB_NODE_SWITCH: return sprintf(buf, "%d: switch\n", dev->node_type);
@@ -595,6 +605,9 @@
struct ib_device_attr attr;
ssize_t ret;
+ if (!ibdev_is_alive(dev))
+ return -ENODEV;
+
ret = ib_query_device(dev, &attr);
if (ret)
return ret;
@@ -612,6 +625,9 @@
struct ib_device_attr attr;
ssize_t ret;
+ if (!ibdev_is_alive(dev))
+ return -ENODEV;
+
ret = ib_query_device(dev, &attr);
if (ret)
return ret;
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index d0f0b0a..2847756 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -41,37 +41,81 @@
#include <linux/file.h>
#include <linux/mount.h>
#include <linux/cdev.h>
+#include <linux/idr.h>
#include <asm/uaccess.h>
-#include "ucm.h"
+#include <rdma/ib_cm.h>
+#include <rdma/ib_user_cm.h>
MODULE_AUTHOR("Libor Michalek");
MODULE_DESCRIPTION("InfiniBand userspace Connection Manager access");
MODULE_LICENSE("Dual BSD/GPL");
-static int ucm_debug_level;
+struct ib_ucm_device {
+ int devnum;
+ struct cdev dev;
+ struct class_device class_dev;
+ struct ib_device *ib_dev;
+};
-module_param_named(debug_level, ucm_debug_level, int, 0644);
-MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0");
+struct ib_ucm_file {
+ struct semaphore mutex;
+ struct file *filp;
+ struct ib_ucm_device *device;
+
+ struct list_head ctxs;
+ struct list_head events;
+ wait_queue_head_t poll_wait;
+};
+
+struct ib_ucm_context {
+ int id;
+ wait_queue_head_t wait;
+ atomic_t ref;
+ int events_reported;
+
+ struct ib_ucm_file *file;
+ struct ib_cm_id *cm_id;
+ __u64 uid;
+
+ struct list_head events; /* list of pending events. */
+ struct list_head file_list; /* member in file ctx list */
+};
+
+struct ib_ucm_event {
+ struct ib_ucm_context *ctx;
+ struct list_head file_list; /* member in file event list */
+ struct list_head ctx_list; /* member in ctx event list */
+
+ struct ib_cm_id *cm_id;
+ struct ib_ucm_event_resp resp;
+ void *data;
+ void *info;
+ int data_len;
+ int info_len;
+};
enum {
IB_UCM_MAJOR = 231,
- IB_UCM_MINOR = 255
+ IB_UCM_BASE_MINOR = 224,
+ IB_UCM_MAX_DEVICES = 32
};
-#define IB_UCM_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_MINOR)
+#define IB_UCM_BASE_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_BASE_MINOR)
-#define PFX "UCM: "
+static void ib_ucm_add_one(struct ib_device *device);
+static void ib_ucm_remove_one(struct ib_device *device);
-#define ucm_dbg(format, arg...) \
- do { \
- if (ucm_debug_level > 0) \
- printk(KERN_DEBUG PFX format, ## arg); \
- } while (0)
+static struct ib_client ucm_client = {
+ .name = "ucm",
+ .add = ib_ucm_add_one,
+ .remove = ib_ucm_remove_one
+};
-static struct semaphore ctx_id_mutex;
-static struct idr ctx_id_table;
+static DECLARE_MUTEX(ctx_id_mutex);
+static DEFINE_IDR(ctx_id_table);
+static DECLARE_BITMAP(dev_map, IB_UCM_MAX_DEVICES);
static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id)
{
@@ -152,17 +196,13 @@
goto error;
list_add_tail(&ctx->file_list, &file->ctxs);
- ucm_dbg("Allocated CM ID <%d>\n", ctx->id);
return ctx;
error:
kfree(ctx);
return NULL;
}
-/*
- * Event portion of the API, handle CM events
- * and allow event polling.
- */
+
static void ib_ucm_event_path_get(struct ib_ucm_path_rec *upath,
struct ib_sa_path_rec *kpath)
{
@@ -209,6 +249,7 @@
ureq->retry_count = kreq->retry_count;
ureq->rnr_retry_count = kreq->rnr_retry_count;
ureq->srq = kreq->srq;
+ ureq->port = kreq->port;
ib_ucm_event_path_get(&ureq->primary_path, kreq->primary_path);
ib_ucm_event_path_get(&ureq->alternate_path, kreq->alternate_path);
@@ -295,6 +336,8 @@
case IB_CM_SIDR_REQ_RECEIVED:
uvt->resp.u.sidr_req_resp.pkey =
evt->param.sidr_req_rcvd.pkey;
+ uvt->resp.u.sidr_req_resp.port =
+ evt->param.sidr_req_rcvd.port;
uvt->data_len = IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE;
break;
case IB_CM_SIDR_REP_RECEIVED:
@@ -387,9 +430,7 @@
if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
return -EFAULT;
- /*
- * wait
- */
+
down(&file->mutex);
while (list_empty(&file->events)) {
@@ -471,7 +512,6 @@
return result;
}
-
static ssize_t ib_ucm_create_id(struct ib_ucm_file *file,
const char __user *inbuf,
int in_len, int out_len)
@@ -494,29 +534,27 @@
return -ENOMEM;
ctx->uid = cmd.uid;
- ctx->cm_id = ib_create_cm_id(ib_ucm_event_handler, ctx);
+ ctx->cm_id = ib_create_cm_id(file->device->ib_dev,
+ ib_ucm_event_handler, ctx);
if (IS_ERR(ctx->cm_id)) {
result = PTR_ERR(ctx->cm_id);
- goto err;
+ goto err1;
}
resp.id = ctx->id;
if (copy_to_user((void __user *)(unsigned long)cmd.response,
&resp, sizeof(resp))) {
result = -EFAULT;
- goto err;
+ goto err2;
}
-
return 0;
-err:
+err2:
+ ib_destroy_cm_id(ctx->cm_id);
+err1:
down(&ctx_id_mutex);
idr_remove(&ctx_id_table, ctx->id);
up(&ctx_id_mutex);
-
- if (!IS_ERR(ctx->cm_id))
- ib_destroy_cm_id(ctx->cm_id);
-
kfree(ctx);
return result;
}
@@ -1184,9 +1222,6 @@
if (copy_from_user(&hdr, buf, sizeof(hdr)))
return -EFAULT;
- ucm_dbg("Write. cmd <%d> in <%d> out <%d> len <%Zu>\n",
- hdr.cmd, hdr.in, hdr.out, len);
-
if (hdr.cmd < 0 || hdr.cmd >= ARRAY_SIZE(ucm_cmd_table))
return -EINVAL;
@@ -1231,8 +1266,7 @@
filp->private_data = file;
file->filp = filp;
-
- ucm_dbg("Created struct\n");
+ file->device = container_of(inode->i_cdev, struct ib_ucm_device, dev);
return 0;
}
@@ -1263,7 +1297,17 @@
return 0;
}
-static struct file_operations ib_ucm_fops = {
+static void ib_ucm_release_class_dev(struct class_device *class_dev)
+{
+ struct ib_ucm_device *dev;
+
+ dev = container_of(class_dev, struct ib_ucm_device, class_dev);
+ cdev_del(&dev->dev);
+ clear_bit(dev->devnum, dev_map);
+ kfree(dev);
+}
+
+static struct file_operations ucm_fops = {
.owner = THIS_MODULE,
.open = ib_ucm_open,
.release = ib_ucm_close,
@@ -1271,55 +1315,142 @@
.poll = ib_ucm_poll,
};
+static struct class ucm_class = {
+ .name = "infiniband_cm",
+ .release = ib_ucm_release_class_dev
+};
-static struct class *ib_ucm_class;
-static struct cdev ib_ucm_cdev;
+static ssize_t show_dev(struct class_device *class_dev, char *buf)
+{
+ struct ib_ucm_device *dev;
+
+ dev = container_of(class_dev, struct ib_ucm_device, class_dev);
+ return print_dev_t(buf, dev->dev.dev);
+}
+static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL);
+
+static ssize_t show_ibdev(struct class_device *class_dev, char *buf)
+{
+ struct ib_ucm_device *dev;
+
+ dev = container_of(class_dev, struct ib_ucm_device, class_dev);
+ return sprintf(buf, "%s\n", dev->ib_dev->name);
+}
+static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL);
+
+static void ib_ucm_add_one(struct ib_device *device)
+{
+ struct ib_ucm_device *ucm_dev;
+
+ if (!device->alloc_ucontext)
+ return;
+
+ ucm_dev = kmalloc(sizeof *ucm_dev, GFP_KERNEL);
+ if (!ucm_dev)
+ return;
+
+ memset(ucm_dev, 0, sizeof *ucm_dev);
+ ucm_dev->ib_dev = device;
+
+ ucm_dev->devnum = find_first_zero_bit(dev_map, IB_UCM_MAX_DEVICES);
+ if (ucm_dev->devnum >= IB_UCM_MAX_DEVICES)
+ goto err;
+
+ set_bit(ucm_dev->devnum, dev_map);
+
+ cdev_init(&ucm_dev->dev, &ucm_fops);
+ ucm_dev->dev.owner = THIS_MODULE;
+ kobject_set_name(&ucm_dev->dev.kobj, "ucm%d", ucm_dev->devnum);
+ if (cdev_add(&ucm_dev->dev, IB_UCM_BASE_DEV + ucm_dev->devnum, 1))
+ goto err;
+
+ ucm_dev->class_dev.class = &ucm_class;
+ ucm_dev->class_dev.dev = device->dma_device;
+ snprintf(ucm_dev->class_dev.class_id, BUS_ID_SIZE, "ucm%d",
+ ucm_dev->devnum);
+ if (class_device_register(&ucm_dev->class_dev))
+ goto err_cdev;
+
+ if (class_device_create_file(&ucm_dev->class_dev,
+ &class_device_attr_dev))
+ goto err_class;
+ if (class_device_create_file(&ucm_dev->class_dev,
+ &class_device_attr_ibdev))
+ goto err_class;
+
+ ib_set_client_data(device, &ucm_client, ucm_dev);
+ return;
+
+err_class:
+ class_device_unregister(&ucm_dev->class_dev);
+err_cdev:
+ cdev_del(&ucm_dev->dev);
+ clear_bit(ucm_dev->devnum, dev_map);
+err:
+ kfree(ucm_dev);
+ return;
+}
+
+static void ib_ucm_remove_one(struct ib_device *device)
+{
+ struct ib_ucm_device *ucm_dev = ib_get_client_data(device, &ucm_client);
+
+ if (!ucm_dev)
+ return;
+
+ class_device_unregister(&ucm_dev->class_dev);
+}
+
+static ssize_t show_abi_version(struct class *class, char *buf)
+{
+ return sprintf(buf, "%d\n", IB_USER_CM_ABI_VERSION);
+}
+static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
static int __init ib_ucm_init(void)
{
- int result;
+ int ret;
- result = register_chrdev_region(IB_UCM_DEV, 1, "infiniband_cm");
- if (result) {
- ucm_dbg("Error <%d> registering dev\n", result);
- goto err_chr;
+ ret = register_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES,
+ "infiniband_cm");
+ if (ret) {
+ printk(KERN_ERR "ucm: couldn't register device number\n");
+ goto err;
}
- cdev_init(&ib_ucm_cdev, &ib_ucm_fops);
-
- result = cdev_add(&ib_ucm_cdev, IB_UCM_DEV, 1);
- if (result) {
- ucm_dbg("Error <%d> adding cdev\n", result);
- goto err_cdev;
+ ret = class_register(&ucm_class);
+ if (ret) {
+ printk(KERN_ERR "ucm: couldn't create class infiniband_cm\n");
+ goto err_chrdev;
}
- ib_ucm_class = class_create(THIS_MODULE, "infiniband_cm");
- if (IS_ERR(ib_ucm_class)) {
- result = PTR_ERR(ib_ucm_class);
- ucm_dbg("Error <%d> creating class\n", result);
+ ret = class_create_file(&ucm_class, &class_attr_abi_version);
+ if (ret) {
+ printk(KERN_ERR "ucm: couldn't create abi_version attribute\n");
goto err_class;
}
- class_device_create(ib_ucm_class, IB_UCM_DEV, NULL, "ucm");
-
- idr_init(&ctx_id_table);
- init_MUTEX(&ctx_id_mutex);
-
+ ret = ib_register_client(&ucm_client);
+ if (ret) {
+ printk(KERN_ERR "ucm: couldn't register client\n");
+ goto err_class;
+ }
return 0;
+
err_class:
- cdev_del(&ib_ucm_cdev);
-err_cdev:
- unregister_chrdev_region(IB_UCM_DEV, 1);
-err_chr:
- return result;
+ class_unregister(&ucm_class);
+err_chrdev:
+ unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES);
+err:
+ return ret;
}
static void __exit ib_ucm_cleanup(void)
{
- class_device_destroy(ib_ucm_class, IB_UCM_DEV);
- class_destroy(ib_ucm_class);
- cdev_del(&ib_ucm_cdev);
- unregister_chrdev_region(IB_UCM_DEV, 1);
+ ib_unregister_client(&ucm_client);
+ class_unregister(&ucm_class);
+ unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES);
+ idr_destroy(&ctx_id_table);
}
module_init(ib_ucm_init);
diff --git a/drivers/infiniband/core/ucm.h b/drivers/infiniband/core/ucm.h
deleted file mode 100644
index f46f37b..0000000
--- a/drivers/infiniband/core/ucm.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (c) 2005 Topspin Communications. All rights reserved.
- * Copyright (c) 2005 Intel Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * $Id: ucm.h 2208 2005-04-22 23:24:31Z libor $
- */
-
-#ifndef UCM_H
-#define UCM_H
-
-#include <linux/fs.h>
-#include <linux/device.h>
-#include <linux/cdev.h>
-#include <linux/idr.h>
-
-#include <rdma/ib_cm.h>
-#include <rdma/ib_user_cm.h>
-
-struct ib_ucm_file {
- struct semaphore mutex;
- struct file *filp;
-
- struct list_head ctxs; /* list of active connections */
- struct list_head events; /* list of pending events */
- wait_queue_head_t poll_wait;
-};
-
-struct ib_ucm_context {
- int id;
- wait_queue_head_t wait;
- atomic_t ref;
- int events_reported;
-
- struct ib_ucm_file *file;
- struct ib_cm_id *cm_id;
- __u64 uid;
-
- struct list_head events; /* list of pending events. */
- struct list_head file_list; /* member in file ctx list */
-};
-
-struct ib_ucm_event {
- struct ib_ucm_context *ctx;
- struct list_head file_list; /* member in file event list */
- struct list_head ctx_list; /* member in ctx event list */
-
- struct ib_cm_id *cm_id;
- struct ib_ucm_event_resp resp;
- void *data;
- void *info;
- int data_len;
- int info_len;
-};
-
-#endif /* UCM_H */
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index a64d6b4..97128e2 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -64,18 +64,39 @@
IB_UMAD_MINOR_BASE = 0
};
-struct ib_umad_port {
- int devnum;
- struct cdev dev;
- struct class_device class_dev;
+/*
+ * Our lifetime rules for these structs are the following: each time a
+ * device special file is opened, we look up the corresponding struct
+ * ib_umad_port by minor in the umad_port[] table while holding the
+ * port_lock. If this lookup succeeds, we take a reference on the
+ * ib_umad_port's struct ib_umad_device while still holding the
+ * port_lock; if the lookup fails, we fail the open(). We drop these
+ * references in the corresponding close().
+ *
+ * In addition to references coming from open character devices, there
+ * is one more reference to each ib_umad_device representing the
+ * module's reference taken when allocating the ib_umad_device in
+ * ib_umad_add_one().
+ *
+ * When destroying an ib_umad_device, we clear all of its
+ * ib_umad_ports from umad_port[] while holding port_lock before
+ * dropping the module's reference to the ib_umad_device. This is
+ * always safe because any open() calls will either succeed and obtain
+ * a reference before we clear the umad_port[] entries, or fail after
+ * we clear the umad_port[] entries.
+ */
- int sm_devnum;
- struct cdev sm_dev;
- struct class_device sm_class_dev;
+struct ib_umad_port {
+ struct cdev *dev;
+ struct class_device *class_dev;
+
+ struct cdev *sm_dev;
+ struct class_device *sm_class_dev;
struct semaphore sm_sem;
struct ib_device *ib_dev;
struct ib_umad_device *umad_dev;
+ int dev_num;
u8 port_num;
};
@@ -96,21 +117,31 @@
};
struct ib_umad_packet {
- struct ib_ah *ah;
struct ib_mad_send_buf *msg;
struct list_head list;
int length;
- DECLARE_PCI_UNMAP_ADDR(mapping)
struct ib_user_mad mad;
};
+static struct class *umad_class;
+
static const dev_t base_dev = MKDEV(IB_UMAD_MAJOR, IB_UMAD_MINOR_BASE);
-static spinlock_t map_lock;
+
+static DEFINE_SPINLOCK(port_lock);
+static struct ib_umad_port *umad_port[IB_UMAD_MAX_PORTS];
static DECLARE_BITMAP(dev_map, IB_UMAD_MAX_PORTS * 2);
static void ib_umad_add_one(struct ib_device *device);
static void ib_umad_remove_one(struct ib_device *device);
+static void ib_umad_release_dev(struct kref *ref)
+{
+ struct ib_umad_device *dev =
+ container_of(ref, struct ib_umad_device, ref);
+
+ kfree(dev);
+}
+
static int queue_packet(struct ib_umad_file *file,
struct ib_mad_agent *agent,
struct ib_umad_packet *packet)
@@ -139,22 +170,19 @@
struct ib_mad_send_wc *send_wc)
{
struct ib_umad_file *file = agent->context;
- struct ib_umad_packet *timeout, *packet =
- (void *) (unsigned long) send_wc->wr_id;
+ struct ib_umad_packet *timeout;
+ struct ib_umad_packet *packet = send_wc->send_buf->context[0];
- ib_destroy_ah(packet->msg->send_wr.wr.ud.ah);
+ ib_destroy_ah(packet->msg->ah);
ib_free_send_mad(packet->msg);
if (send_wc->status == IB_WC_RESP_TIMEOUT_ERR) {
- timeout = kmalloc(sizeof *timeout + sizeof (struct ib_mad_hdr),
- GFP_KERNEL);
+ timeout = kzalloc(sizeof *timeout + IB_MGMT_MAD_HDR, GFP_KERNEL);
if (!timeout)
goto out;
- memset(timeout, 0, sizeof *timeout + sizeof (struct ib_mad_hdr));
-
- timeout->length = sizeof (struct ib_mad_hdr);
- timeout->mad.hdr.id = packet->mad.hdr.id;
+ timeout->length = IB_MGMT_MAD_HDR;
+ timeout->mad.hdr.id = packet->mad.hdr.id;
timeout->mad.hdr.status = ETIMEDOUT;
memcpy(timeout->mad.data, packet->mad.data,
sizeof (struct ib_mad_hdr));
@@ -177,11 +205,10 @@
goto out;
length = mad_recv_wc->mad_len;
- packet = kmalloc(sizeof *packet + length, GFP_KERNEL);
+ packet = kzalloc(sizeof *packet + length, GFP_KERNEL);
if (!packet)
goto out;
- memset(packet, 0, sizeof *packet + length);
packet->length = length;
ib_coalesce_recv_mad(mad_recv_wc, packet->mad.data);
@@ -247,7 +274,7 @@
else
ret = -ENOSPC;
} else if (copy_to_user(buf, &packet->mad,
- packet->length + sizeof (struct ib_user_mad)))
+ packet->length + sizeof (struct ib_user_mad)))
ret = -EFAULT;
else
ret = packet->length + sizeof (struct ib_user_mad);
@@ -268,26 +295,23 @@
struct ib_umad_packet *packet;
struct ib_mad_agent *agent;
struct ib_ah_attr ah_attr;
- struct ib_send_wr *bad_wr;
+ struct ib_ah *ah;
struct ib_rmpp_mad *rmpp_mad;
u8 method;
__be64 *tid;
- int ret, length, hdr_len, data_len, rmpp_hdr_size;
+ int ret, length, hdr_len, copy_offset;
int rmpp_active = 0;
if (count < sizeof (struct ib_user_mad))
return -EINVAL;
length = count - sizeof (struct ib_user_mad);
- packet = kmalloc(sizeof *packet + sizeof(struct ib_mad_hdr) +
- sizeof(struct ib_rmpp_hdr), GFP_KERNEL);
+ packet = kmalloc(sizeof *packet + IB_MGMT_RMPP_HDR, GFP_KERNEL);
if (!packet)
return -ENOMEM;
if (copy_from_user(&packet->mad, buf,
- sizeof (struct ib_user_mad) +
- sizeof(struct ib_mad_hdr) +
- sizeof(struct ib_rmpp_hdr))) {
+ sizeof (struct ib_user_mad) + IB_MGMT_RMPP_HDR)) {
ret = -EFAULT;
goto err;
}
@@ -298,8 +322,6 @@
goto err;
}
- packet->length = length;
-
down_read(&file->agent_mutex);
agent = file->agent[packet->mad.hdr.id];
@@ -321,9 +343,9 @@
ah_attr.grh.traffic_class = packet->mad.hdr.traffic_class;
}
- packet->ah = ib_create_ah(agent->qp->pd, &ah_attr);
- if (IS_ERR(packet->ah)) {
- ret = PTR_ERR(packet->ah);
+ ah = ib_create_ah(agent->qp->pd, &ah_attr);
+ if (IS_ERR(ah)) {
+ ret = PTR_ERR(ah);
goto err_up;
}
@@ -337,64 +359,44 @@
/* Validate that the management class can support RMPP */
if (rmpp_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_ADM) {
- hdr_len = offsetof(struct ib_sa_mad, data);
- data_len = length - hdr_len;
+ hdr_len = IB_MGMT_SA_HDR;
} else if ((rmpp_mad->mad_hdr.mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) &&
(rmpp_mad->mad_hdr.mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)) {
- hdr_len = offsetof(struct ib_vendor_mad, data);
- data_len = length - hdr_len;
+ hdr_len = IB_MGMT_VENDOR_HDR;
} else {
ret = -EINVAL;
goto err_ah;
}
rmpp_active = 1;
+ copy_offset = IB_MGMT_RMPP_HDR;
} else {
- if (length > sizeof(struct ib_mad)) {
- ret = -EINVAL;
- goto err_ah;
- }
- hdr_len = offsetof(struct ib_mad, data);
- data_len = length - hdr_len;
+ hdr_len = IB_MGMT_MAD_HDR;
+ copy_offset = IB_MGMT_MAD_HDR;
}
packet->msg = ib_create_send_mad(agent,
be32_to_cpu(packet->mad.hdr.qpn),
- 0, packet->ah, rmpp_active,
- hdr_len, data_len,
+ 0, rmpp_active,
+ hdr_len, length - hdr_len,
GFP_KERNEL);
if (IS_ERR(packet->msg)) {
ret = PTR_ERR(packet->msg);
goto err_ah;
}
- packet->msg->send_wr.wr.ud.timeout_ms = packet->mad.hdr.timeout_ms;
- packet->msg->send_wr.wr.ud.retries = packet->mad.hdr.retries;
+ packet->msg->ah = ah;
+ packet->msg->timeout_ms = packet->mad.hdr.timeout_ms;
+ packet->msg->retries = packet->mad.hdr.retries;
+ packet->msg->context[0] = packet;
- /* Override send WR WRID initialized in ib_create_send_mad */
- packet->msg->send_wr.wr_id = (unsigned long) packet;
-
- if (!rmpp_active) {
- /* Copy message from user into send buffer */
- if (copy_from_user(packet->msg->mad,
- buf + sizeof(struct ib_user_mad), length)) {
- ret = -EFAULT;
- goto err_msg;
- }
- } else {
- rmpp_hdr_size = sizeof(struct ib_mad_hdr) +
- sizeof(struct ib_rmpp_hdr);
-
- /* Only copy MAD headers (RMPP header in place) */
- memcpy(packet->msg->mad, packet->mad.data,
- sizeof(struct ib_mad_hdr));
-
- /* Now, copy rest of message from user into send buffer */
- if (copy_from_user(((struct ib_rmpp_mad *) packet->msg->mad)->data,
- buf + sizeof (struct ib_user_mad) + rmpp_hdr_size,
- length - rmpp_hdr_size)) {
- ret = -EFAULT;
- goto err_msg;
- }
+ /* Copy MAD headers (RMPP header in place) */
+ memcpy(packet->msg->mad, packet->mad.data, IB_MGMT_MAD_HDR);
+ /* Now, copy rest of message from user into send buffer */
+ if (copy_from_user(packet->msg->mad + copy_offset,
+ buf + sizeof (struct ib_user_mad) + copy_offset,
+ length - copy_offset)) {
+ ret = -EFAULT;
+ goto err_msg;
}
/*
@@ -403,29 +405,29 @@
* transaction ID matches the agent being used to send the
* MAD.
*/
- method = packet->msg->mad->mad_hdr.method;
+ method = ((struct ib_mad_hdr *) packet->msg->mad)->method;
if (!(method & IB_MGMT_METHOD_RESP) &&
method != IB_MGMT_METHOD_TRAP_REPRESS &&
method != IB_MGMT_METHOD_SEND) {
- tid = &packet->msg->mad->mad_hdr.tid;
+ tid = &((struct ib_mad_hdr *) packet->msg->mad)->tid;
*tid = cpu_to_be64(((u64) agent->hi_tid) << 32 |
(be64_to_cpup(tid) & 0xffffffff));
}
- ret = ib_post_send_mad(agent, &packet->msg->send_wr, &bad_wr);
+ ret = ib_post_send_mad(packet->msg, NULL);
if (ret)
goto err_msg;
up_read(&file->agent_mutex);
- return sizeof (struct ib_user_mad_hdr) + packet->length;
+ return count;
err_msg:
ib_free_send_mad(packet->msg);
err_ah:
- ib_destroy_ah(packet->ah);
+ ib_destroy_ah(ah);
err_up:
up_read(&file->agent_mutex);
@@ -565,15 +567,23 @@
static int ib_umad_open(struct inode *inode, struct file *filp)
{
- struct ib_umad_port *port =
- container_of(inode->i_cdev, struct ib_umad_port, dev);
+ struct ib_umad_port *port;
struct ib_umad_file *file;
- file = kmalloc(sizeof *file, GFP_KERNEL);
- if (!file)
- return -ENOMEM;
+ spin_lock(&port_lock);
+ port = umad_port[iminor(inode) - IB_UMAD_MINOR_BASE];
+ if (port)
+ kref_get(&port->umad_dev->ref);
+ spin_unlock(&port_lock);
- memset(file, 0, sizeof *file);
+ if (!port)
+ return -ENXIO;
+
+ file = kzalloc(sizeof *file, GFP_KERNEL);
+ if (!file) {
+ kref_put(&port->umad_dev->ref, ib_umad_release_dev);
+ return -ENOMEM;
+ }
spin_lock_init(&file->recv_lock);
init_rwsem(&file->agent_mutex);
@@ -589,6 +599,7 @@
static int ib_umad_close(struct inode *inode, struct file *filp)
{
struct ib_umad_file *file = filp->private_data;
+ struct ib_umad_device *dev = file->port->umad_dev;
struct ib_umad_packet *packet, *tmp;
int i;
@@ -603,6 +614,8 @@
kfree(file);
+ kref_put(&dev->ref, ib_umad_release_dev);
+
return 0;
}
@@ -619,30 +632,46 @@
static int ib_umad_sm_open(struct inode *inode, struct file *filp)
{
- struct ib_umad_port *port =
- container_of(inode->i_cdev, struct ib_umad_port, sm_dev);
+ struct ib_umad_port *port;
struct ib_port_modify props = {
.set_port_cap_mask = IB_PORT_SM
};
int ret;
+ spin_lock(&port_lock);
+ port = umad_port[iminor(inode) - IB_UMAD_MINOR_BASE - IB_UMAD_MAX_PORTS];
+ if (port)
+ kref_get(&port->umad_dev->ref);
+ spin_unlock(&port_lock);
+
+ if (!port)
+ return -ENXIO;
+
if (filp->f_flags & O_NONBLOCK) {
- if (down_trylock(&port->sm_sem))
- return -EAGAIN;
+ if (down_trylock(&port->sm_sem)) {
+ ret = -EAGAIN;
+ goto fail;
+ }
} else {
- if (down_interruptible(&port->sm_sem))
- return -ERESTARTSYS;
+ if (down_interruptible(&port->sm_sem)) {
+ ret = -ERESTARTSYS;
+ goto fail;
+ }
}
ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props);
if (ret) {
up(&port->sm_sem);
- return ret;
+ goto fail;
}
filp->private_data = port;
return 0;
+
+fail:
+ kref_put(&port->umad_dev->ref, ib_umad_release_dev);
+ return ret;
}
static int ib_umad_sm_close(struct inode *inode, struct file *filp)
@@ -656,6 +685,8 @@
ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props);
up(&port->sm_sem);
+ kref_put(&port->umad_dev->ref, ib_umad_release_dev);
+
return ret;
}
@@ -671,21 +702,13 @@
.remove = ib_umad_remove_one
};
-static ssize_t show_dev(struct class_device *class_dev, char *buf)
-{
- struct ib_umad_port *port = class_get_devdata(class_dev);
-
- if (class_dev == &port->class_dev)
- return print_dev_t(buf, port->dev.dev);
- else
- return print_dev_t(buf, port->sm_dev.dev);
-}
-static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL);
-
static ssize_t show_ibdev(struct class_device *class_dev, char *buf)
{
struct ib_umad_port *port = class_get_devdata(class_dev);
+ if (!port)
+ return -ENODEV;
+
return sprintf(buf, "%s\n", port->ib_dev->name);
}
static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL);
@@ -694,38 +717,13 @@
{
struct ib_umad_port *port = class_get_devdata(class_dev);
+ if (!port)
+ return -ENODEV;
+
return sprintf(buf, "%d\n", port->port_num);
}
static CLASS_DEVICE_ATTR(port, S_IRUGO, show_port, NULL);
-static void ib_umad_release_dev(struct kref *ref)
-{
- struct ib_umad_device *dev =
- container_of(ref, struct ib_umad_device, ref);
-
- kfree(dev);
-}
-
-static void ib_umad_release_port(struct class_device *class_dev)
-{
- struct ib_umad_port *port = class_get_devdata(class_dev);
-
- if (class_dev == &port->class_dev) {
- cdev_del(&port->dev);
- clear_bit(port->devnum, dev_map);
- } else {
- cdev_del(&port->sm_dev);
- clear_bit(port->sm_devnum, dev_map);
- }
-
- kref_put(&port->umad_dev->ref, ib_umad_release_dev);
-}
-
-static struct class umad_class = {
- .name = "infiniband_mad",
- .release = ib_umad_release_port
-};
-
static ssize_t show_abi_version(struct class *class, char *buf)
{
return sprintf(buf, "%d\n", IB_USER_MAD_ABI_VERSION);
@@ -735,91 +733,102 @@
static int ib_umad_init_port(struct ib_device *device, int port_num,
struct ib_umad_port *port)
{
- spin_lock(&map_lock);
- port->devnum = find_first_zero_bit(dev_map, IB_UMAD_MAX_PORTS);
- if (port->devnum >= IB_UMAD_MAX_PORTS) {
- spin_unlock(&map_lock);
+ spin_lock(&port_lock);
+ port->dev_num = find_first_zero_bit(dev_map, IB_UMAD_MAX_PORTS);
+ if (port->dev_num >= IB_UMAD_MAX_PORTS) {
+ spin_unlock(&port_lock);
return -1;
}
- port->sm_devnum = find_next_zero_bit(dev_map, IB_UMAD_MAX_PORTS * 2, IB_UMAD_MAX_PORTS);
- if (port->sm_devnum >= IB_UMAD_MAX_PORTS * 2) {
- spin_unlock(&map_lock);
- return -1;
- }
- set_bit(port->devnum, dev_map);
- set_bit(port->sm_devnum, dev_map);
- spin_unlock(&map_lock);
+ set_bit(port->dev_num, dev_map);
+ spin_unlock(&port_lock);
port->ib_dev = device;
port->port_num = port_num;
init_MUTEX(&port->sm_sem);
- cdev_init(&port->dev, &umad_fops);
- port->dev.owner = THIS_MODULE;
- kobject_set_name(&port->dev.kobj, "umad%d", port->devnum);
- if (cdev_add(&port->dev, base_dev + port->devnum, 1))
+ port->dev = cdev_alloc();
+ if (!port->dev)
return -1;
-
- port->class_dev.class = &umad_class;
- port->class_dev.dev = device->dma_device;
-
- snprintf(port->class_dev.class_id, BUS_ID_SIZE, "umad%d", port->devnum);
-
- if (class_device_register(&port->class_dev))
+ port->dev->owner = THIS_MODULE;
+ port->dev->ops = &umad_fops;
+ kobject_set_name(&port->dev->kobj, "umad%d", port->dev_num);
+ if (cdev_add(port->dev, base_dev + port->dev_num, 1))
goto err_cdev;
- class_set_devdata(&port->class_dev, port);
- kref_get(&port->umad_dev->ref);
+ port->class_dev = class_device_create(umad_class, NULL, port->dev->dev,
+ device->dma_device,
+ "umad%d", port->dev_num);
+ if (IS_ERR(port->class_dev))
+ goto err_cdev;
- if (class_device_create_file(&port->class_dev, &class_device_attr_dev))
+ if (class_device_create_file(port->class_dev, &class_device_attr_ibdev))
goto err_class;
- if (class_device_create_file(&port->class_dev, &class_device_attr_ibdev))
- goto err_class;
- if (class_device_create_file(&port->class_dev, &class_device_attr_port))
+ if (class_device_create_file(port->class_dev, &class_device_attr_port))
goto err_class;
- cdev_init(&port->sm_dev, &umad_sm_fops);
- port->sm_dev.owner = THIS_MODULE;
- kobject_set_name(&port->dev.kobj, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS);
- if (cdev_add(&port->sm_dev, base_dev + port->sm_devnum, 1))
- return -1;
-
- port->sm_class_dev.class = &umad_class;
- port->sm_class_dev.dev = device->dma_device;
-
- snprintf(port->sm_class_dev.class_id, BUS_ID_SIZE, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS);
-
- if (class_device_register(&port->sm_class_dev))
+ port->sm_dev = cdev_alloc();
+ if (!port->sm_dev)
+ goto err_class;
+ port->sm_dev->owner = THIS_MODULE;
+ port->sm_dev->ops = &umad_sm_fops;
+ kobject_set_name(&port->dev->kobj, "issm%d", port->dev_num);
+ if (cdev_add(port->sm_dev, base_dev + port->dev_num + IB_UMAD_MAX_PORTS, 1))
goto err_sm_cdev;
- class_set_devdata(&port->sm_class_dev, port);
- kref_get(&port->umad_dev->ref);
+ port->sm_class_dev = class_device_create(umad_class, NULL, port->sm_dev->dev,
+ device->dma_device,
+ "issm%d", port->dev_num);
+ if (IS_ERR(port->sm_class_dev))
+ goto err_sm_cdev;
- if (class_device_create_file(&port->sm_class_dev, &class_device_attr_dev))
+ class_set_devdata(port->class_dev, port);
+ class_set_devdata(port->sm_class_dev, port);
+
+ if (class_device_create_file(port->sm_class_dev, &class_device_attr_ibdev))
goto err_sm_class;
- if (class_device_create_file(&port->sm_class_dev, &class_device_attr_ibdev))
+ if (class_device_create_file(port->sm_class_dev, &class_device_attr_port))
goto err_sm_class;
- if (class_device_create_file(&port->sm_class_dev, &class_device_attr_port))
- goto err_sm_class;
+
+ spin_lock(&port_lock);
+ umad_port[port->dev_num] = port;
+ spin_unlock(&port_lock);
return 0;
err_sm_class:
- class_device_unregister(&port->sm_class_dev);
+ class_device_destroy(umad_class, port->sm_dev->dev);
err_sm_cdev:
- cdev_del(&port->sm_dev);
+ cdev_del(port->sm_dev);
err_class:
- class_device_unregister(&port->class_dev);
+ class_device_destroy(umad_class, port->dev->dev);
err_cdev:
- cdev_del(&port->dev);
- clear_bit(port->devnum, dev_map);
+ cdev_del(port->dev);
+ clear_bit(port->dev_num, dev_map);
return -1;
}
+static void ib_umad_kill_port(struct ib_umad_port *port)
+{
+ class_set_devdata(port->class_dev, NULL);
+ class_set_devdata(port->sm_class_dev, NULL);
+
+ class_device_destroy(umad_class, port->dev->dev);
+ class_device_destroy(umad_class, port->sm_dev->dev);
+
+ cdev_del(port->dev);
+ cdev_del(port->sm_dev);
+
+ spin_lock(&port_lock);
+ umad_port[port->dev_num] = NULL;
+ spin_unlock(&port_lock);
+
+ clear_bit(port->dev_num, dev_map);
+}
+
static void ib_umad_add_one(struct ib_device *device)
{
struct ib_umad_device *umad_dev;
@@ -832,15 +841,12 @@
e = device->phys_port_cnt;
}
- umad_dev = kmalloc(sizeof *umad_dev +
+ umad_dev = kzalloc(sizeof *umad_dev +
(e - s + 1) * sizeof (struct ib_umad_port),
GFP_KERNEL);
if (!umad_dev)
return;
- memset(umad_dev, 0, sizeof *umad_dev +
- (e - s + 1) * sizeof (struct ib_umad_port));
-
kref_init(&umad_dev->ref);
umad_dev->start_port = s;
@@ -858,10 +864,8 @@
return;
err:
- while (--i >= s) {
- class_device_unregister(&umad_dev->port[i - s].class_dev);
- class_device_unregister(&umad_dev->port[i - s].sm_class_dev);
- }
+ while (--i >= s)
+ ib_umad_kill_port(&umad_dev->port[i]);
kref_put(&umad_dev->ref, ib_umad_release_dev);
}
@@ -874,10 +878,8 @@
if (!umad_dev)
return;
- for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i) {
- class_device_unregister(&umad_dev->port[i].class_dev);
- class_device_unregister(&umad_dev->port[i].sm_class_dev);
- }
+ for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i)
+ ib_umad_kill_port(&umad_dev->port[i]);
kref_put(&umad_dev->ref, ib_umad_release_dev);
}
@@ -886,8 +888,6 @@
{
int ret;
- spin_lock_init(&map_lock);
-
ret = register_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2,
"infiniband_mad");
if (ret) {
@@ -895,13 +895,14 @@
goto out;
}
- ret = class_register(&umad_class);
- if (ret) {
+ umad_class = class_create(THIS_MODULE, "infiniband_mad");
+ if (IS_ERR(umad_class)) {
+ ret = PTR_ERR(umad_class);
printk(KERN_ERR "user_mad: couldn't create class infiniband_mad\n");
goto out_chrdev;
}
- ret = class_create_file(&umad_class, &class_attr_abi_version);
+ ret = class_create_file(umad_class, &class_attr_abi_version);
if (ret) {
printk(KERN_ERR "user_mad: couldn't create abi_version attribute\n");
goto out_class;
@@ -916,7 +917,7 @@
return 0;
out_class:
- class_unregister(&umad_class);
+ class_destroy(umad_class);
out_chrdev:
unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2);
@@ -928,7 +929,7 @@
static void __exit ib_umad_cleanup(void)
{
ib_unregister_client(&umad_client);
- class_unregister(&umad_class);
+ class_destroy(umad_class);
unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2);
}
diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h
index cc12434..031cdf3 100644
--- a/drivers/infiniband/core/uverbs.h
+++ b/drivers/infiniband/core/uverbs.h
@@ -3,6 +3,7 @@
* Copyright (c) 2005 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
* Copyright (c) 2005 Voltaire, Inc. All rights reserved.
+ * Copyright (c) 2005 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -38,29 +39,47 @@
#ifndef UVERBS_H
#define UVERBS_H
-/* Include device.h and fs.h until cdev.h is self-sufficient */
-#include <linux/fs.h>
-#include <linux/device.h>
-#include <linux/cdev.h>
#include <linux/kref.h>
#include <linux/idr.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_user_verbs.h>
+/*
+ * Our lifetime rules for these structs are the following:
+ *
+ * struct ib_uverbs_device: One reference is held by the module and
+ * released in ib_uverbs_remove_one(). Another reference is taken by
+ * ib_uverbs_open() each time the character special file is opened,
+ * and released in ib_uverbs_release_file() when the file is released.
+ *
+ * struct ib_uverbs_file: One reference is held by the VFS and
+ * released when the file is closed. Another reference is taken when
+ * an asynchronous event queue file is created and released when the
+ * event file is closed.
+ *
+ * struct ib_uverbs_event_file: One reference is held by the VFS and
+ * released when the file is closed. For asynchronous event files,
+ * another reference is held by the corresponding main context file
+ * and released when that file is closed. For completion event files,
+ * a reference is taken when a CQ is created that uses the file, and
+ * released when the CQ is destroyed.
+ */
+
struct ib_uverbs_device {
+ struct kref ref;
int devnum;
- struct cdev dev;
- struct class_device class_dev;
+ struct cdev *dev;
+ struct class_device *class_dev;
struct ib_device *ib_dev;
- int num_comp;
+ int num_comp_vectors;
};
struct ib_uverbs_event_file {
struct kref ref;
+ struct file *file;
struct ib_uverbs_file *uverbs_file;
spinlock_t lock;
- int fd;
int is_async;
wait_queue_head_t poll_wait;
struct fasync_struct *async_queue;
@@ -73,8 +92,7 @@
struct ib_uverbs_device *device;
struct ib_ucontext *ucontext;
struct ib_event_handler event_handler;
- struct ib_uverbs_event_file async_file;
- struct ib_uverbs_event_file comp_file[1];
+ struct ib_uverbs_event_file *async_file;
};
struct ib_uverbs_event {
@@ -110,10 +128,23 @@
extern struct idr ib_uverbs_qp_idr;
extern struct idr ib_uverbs_srq_idr;
+struct file *ib_uverbs_alloc_event_file(struct ib_uverbs_file *uverbs_file,
+ int is_async, int *fd);
+void ib_uverbs_release_event_file(struct kref *ref);
+struct ib_uverbs_event_file *ib_uverbs_lookup_comp_file(int fd);
+
+void ib_uverbs_release_ucq(struct ib_uverbs_file *file,
+ struct ib_uverbs_event_file *ev_file,
+ struct ib_ucq_object *uobj);
+void ib_uverbs_release_uevent(struct ib_uverbs_file *file,
+ struct ib_uevent_object *uobj);
+
void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context);
void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr);
void ib_uverbs_qp_event_handler(struct ib_event *event, void *context_ptr);
void ib_uverbs_srq_event_handler(struct ib_event *event, void *context_ptr);
+void ib_uverbs_event_handler(struct ib_event_handler *handler,
+ struct ib_event *event);
int ib_umem_get(struct ib_device *dev, struct ib_umem *mem,
void *addr, size_t size, int write);
@@ -125,21 +156,26 @@
const char __user *buf, int in_len, \
int out_len)
-IB_UVERBS_DECLARE_CMD(query_params);
IB_UVERBS_DECLARE_CMD(get_context);
IB_UVERBS_DECLARE_CMD(query_device);
IB_UVERBS_DECLARE_CMD(query_port);
-IB_UVERBS_DECLARE_CMD(query_gid);
-IB_UVERBS_DECLARE_CMD(query_pkey);
IB_UVERBS_DECLARE_CMD(alloc_pd);
IB_UVERBS_DECLARE_CMD(dealloc_pd);
IB_UVERBS_DECLARE_CMD(reg_mr);
IB_UVERBS_DECLARE_CMD(dereg_mr);
+IB_UVERBS_DECLARE_CMD(create_comp_channel);
IB_UVERBS_DECLARE_CMD(create_cq);
+IB_UVERBS_DECLARE_CMD(poll_cq);
+IB_UVERBS_DECLARE_CMD(req_notify_cq);
IB_UVERBS_DECLARE_CMD(destroy_cq);
IB_UVERBS_DECLARE_CMD(create_qp);
IB_UVERBS_DECLARE_CMD(modify_qp);
IB_UVERBS_DECLARE_CMD(destroy_qp);
+IB_UVERBS_DECLARE_CMD(post_send);
+IB_UVERBS_DECLARE_CMD(post_recv);
+IB_UVERBS_DECLARE_CMD(post_srq_recv);
+IB_UVERBS_DECLARE_CMD(create_ah);
+IB_UVERBS_DECLARE_CMD(destroy_ah);
IB_UVERBS_DECLARE_CMD(attach_mcast);
IB_UVERBS_DECLARE_CMD(detach_mcast);
IB_UVERBS_DECLARE_CMD(create_srq);
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index 5624451..8c89abc 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -1,6 +1,7 @@
/*
* Copyright (c) 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -33,6 +34,9 @@
* $Id: uverbs_cmd.c 2708 2005-06-24 17:27:21Z roland $
*/
+#include <linux/file.h>
+#include <linux/fs.h>
+
#include <asm/uaccess.h>
#include "uverbs.h"
@@ -45,29 +49,6 @@
(udata)->outlen = (olen); \
} while (0)
-ssize_t ib_uverbs_query_params(struct ib_uverbs_file *file,
- const char __user *buf,
- int in_len, int out_len)
-{
- struct ib_uverbs_query_params cmd;
- struct ib_uverbs_query_params_resp resp;
-
- if (out_len < sizeof resp)
- return -ENOSPC;
-
- if (copy_from_user(&cmd, buf, sizeof cmd))
- return -EFAULT;
-
- memset(&resp, 0, sizeof resp);
-
- resp.num_cq_events = file->device->num_comp;
-
- if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp))
- return -EFAULT;
-
- return in_len;
-}
-
ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
@@ -77,7 +58,7 @@
struct ib_udata udata;
struct ib_device *ibdev = file->device->ib_dev;
struct ib_ucontext *ucontext;
- int i;
+ struct file *filp;
int ret;
if (out_len < sizeof resp)
@@ -110,26 +91,42 @@
INIT_LIST_HEAD(&ucontext->srq_list);
INIT_LIST_HEAD(&ucontext->ah_list);
- resp.async_fd = file->async_file.fd;
- for (i = 0; i < file->device->num_comp; ++i)
- if (copy_to_user((void __user *) (unsigned long) cmd.cq_fd_tab +
- i * sizeof (__u32),
- &file->comp_file[i].fd, sizeof (__u32))) {
- ret = -EFAULT;
- goto err_free;
- }
+ resp.num_comp_vectors = file->device->num_comp_vectors;
+
+ filp = ib_uverbs_alloc_event_file(file, 1, &resp.async_fd);
+ if (IS_ERR(filp)) {
+ ret = PTR_ERR(filp);
+ goto err_free;
+ }
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
- goto err_free;
+ goto err_file;
}
+ file->async_file = filp->private_data;
+
+ INIT_IB_EVENT_HANDLER(&file->event_handler, file->device->ib_dev,
+ ib_uverbs_event_handler);
+ ret = ib_register_event_handler(&file->event_handler);
+ if (ret)
+ goto err_file;
+
+ kref_get(&file->async_file->ref);
+ kref_get(&file->ref);
file->ucontext = ucontext;
+
+ fd_install(resp.async_fd, filp);
+
up(&file->mutex);
return in_len;
+err_file:
+ put_unused_fd(resp.async_fd);
+ fput(filp);
+
err_free:
ibdev->dealloc_ucontext(ucontext);
@@ -255,62 +252,6 @@
return in_len;
}
-ssize_t ib_uverbs_query_gid(struct ib_uverbs_file *file,
- const char __user *buf,
- int in_len, int out_len)
-{
- struct ib_uverbs_query_gid cmd;
- struct ib_uverbs_query_gid_resp resp;
- int ret;
-
- if (out_len < sizeof resp)
- return -ENOSPC;
-
- if (copy_from_user(&cmd, buf, sizeof cmd))
- return -EFAULT;
-
- memset(&resp, 0, sizeof resp);
-
- ret = ib_query_gid(file->device->ib_dev, cmd.port_num, cmd.index,
- (union ib_gid *) resp.gid);
- if (ret)
- return ret;
-
- if (copy_to_user((void __user *) (unsigned long) cmd.response,
- &resp, sizeof resp))
- return -EFAULT;
-
- return in_len;
-}
-
-ssize_t ib_uverbs_query_pkey(struct ib_uverbs_file *file,
- const char __user *buf,
- int in_len, int out_len)
-{
- struct ib_uverbs_query_pkey cmd;
- struct ib_uverbs_query_pkey_resp resp;
- int ret;
-
- if (out_len < sizeof resp)
- return -ENOSPC;
-
- if (copy_from_user(&cmd, buf, sizeof cmd))
- return -EFAULT;
-
- memset(&resp, 0, sizeof resp);
-
- ret = ib_query_pkey(file->device->ib_dev, cmd.port_num, cmd.index,
- &resp.pkey);
- if (ret)
- return ret;
-
- if (copy_to_user((void __user *) (unsigned long) cmd.response,
- &resp, sizeof resp))
- return -EFAULT;
-
- return in_len;
-}
-
ssize_t ib_uverbs_alloc_pd(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
@@ -349,24 +290,20 @@
pd->uobject = uobj;
atomic_set(&pd->usecnt, 0);
+ down(&ib_uverbs_idr_mutex);
+
retry:
if (!idr_pre_get(&ib_uverbs_pd_idr, GFP_KERNEL)) {
ret = -ENOMEM;
- goto err_pd;
+ goto err_up;
}
- down(&ib_uverbs_idr_mutex);
ret = idr_get_new(&ib_uverbs_pd_idr, pd, &uobj->id);
- up(&ib_uverbs_idr_mutex);
if (ret == -EAGAIN)
goto retry;
if (ret)
- goto err_pd;
-
- down(&file->mutex);
- list_add_tail(&uobj->list, &file->ucontext->pd_list);
- up(&file->mutex);
+ goto err_up;
memset(&resp, 0, sizeof resp);
resp.pd_handle = uobj->id;
@@ -374,21 +311,22 @@
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
- goto err_list;
+ goto err_idr;
}
+ down(&file->mutex);
+ list_add_tail(&uobj->list, &file->ucontext->pd_list);
+ up(&file->mutex);
+
+ up(&ib_uverbs_idr_mutex);
+
return in_len;
-err_list:
- down(&file->mutex);
- list_del(&uobj->list);
- up(&file->mutex);
-
- down(&ib_uverbs_idr_mutex);
+err_idr:
idr_remove(&ib_uverbs_pd_idr, uobj->id);
- up(&ib_uverbs_idr_mutex);
-err_pd:
+err_up:
+ up(&ib_uverbs_idr_mutex);
ib_dealloc_pd(pd);
err:
@@ -459,6 +397,14 @@
if ((cmd.start & ~PAGE_MASK) != (cmd.hca_va & ~PAGE_MASK))
return -EINVAL;
+ /*
+ * Local write permission is required if remote write or
+ * remote atomic permission is also requested.
+ */
+ if (cmd.access_flags & (IB_ACCESS_REMOTE_ATOMIC | IB_ACCESS_REMOTE_WRITE) &&
+ !(cmd.access_flags & IB_ACCESS_LOCAL_WRITE))
+ return -EINVAL;
+
obj = kmalloc(sizeof *obj, GFP_KERNEL);
if (!obj)
return -ENOMEM;
@@ -524,24 +470,22 @@
resp.mr_handle = obj->uobject.id;
- down(&file->mutex);
- list_add_tail(&obj->uobject.list, &file->ucontext->mr_list);
- up(&file->mutex);
-
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
- goto err_list;
+ goto err_idr;
}
+ down(&file->mutex);
+ list_add_tail(&obj->uobject.list, &file->ucontext->mr_list);
+ up(&file->mutex);
+
up(&ib_uverbs_idr_mutex);
return in_len;
-err_list:
- down(&file->mutex);
- list_del(&obj->uobject.list);
- up(&file->mutex);
+err_idr:
+ idr_remove(&ib_uverbs_mr_idr, obj->uobject.id);
err_unreg:
ib_dereg_mr(mr);
@@ -595,6 +539,35 @@
return ret ? ret : in_len;
}
+ssize_t ib_uverbs_create_comp_channel(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_create_comp_channel cmd;
+ struct ib_uverbs_create_comp_channel_resp resp;
+ struct file *filp;
+
+ if (out_len < sizeof resp)
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ filp = ib_uverbs_alloc_event_file(file, 0, &resp.fd);
+ if (IS_ERR(filp))
+ return PTR_ERR(filp);
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp)) {
+ put_unused_fd(resp.fd);
+ fput(filp);
+ return -EFAULT;
+ }
+
+ fd_install(resp.fd, filp);
+ return in_len;
+}
+
ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
@@ -603,6 +576,7 @@
struct ib_uverbs_create_cq_resp resp;
struct ib_udata udata;
struct ib_ucq_object *uobj;
+ struct ib_uverbs_event_file *ev_file = NULL;
struct ib_cq *cq;
int ret;
@@ -616,9 +590,12 @@
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
- if (cmd.event_handler >= file->device->num_comp)
+ if (cmd.comp_vector >= file->device->num_comp_vectors)
return -EINVAL;
+ if (cmd.comp_channel >= 0)
+ ev_file = ib_uverbs_lookup_comp_file(cmd.comp_channel);
+
uobj = kmalloc(sizeof *uobj, GFP_KERNEL);
if (!uobj)
return -ENOMEM;
@@ -641,27 +618,23 @@
cq->uobject = &uobj->uobject;
cq->comp_handler = ib_uverbs_comp_handler;
cq->event_handler = ib_uverbs_cq_event_handler;
- cq->cq_context = file;
+ cq->cq_context = ev_file;
atomic_set(&cq->usecnt, 0);
+ down(&ib_uverbs_idr_mutex);
+
retry:
if (!idr_pre_get(&ib_uverbs_cq_idr, GFP_KERNEL)) {
ret = -ENOMEM;
- goto err_cq;
+ goto err_up;
}
- down(&ib_uverbs_idr_mutex);
ret = idr_get_new(&ib_uverbs_cq_idr, cq, &uobj->uobject.id);
- up(&ib_uverbs_idr_mutex);
if (ret == -EAGAIN)
goto retry;
if (ret)
- goto err_cq;
-
- down(&file->mutex);
- list_add_tail(&uobj->uobject.list, &file->ucontext->cq_list);
- up(&file->mutex);
+ goto err_up;
memset(&resp, 0, sizeof resp);
resp.cq_handle = uobj->uobject.id;
@@ -670,21 +643,22 @@
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
- goto err_list;
+ goto err_idr;
}
+ down(&file->mutex);
+ list_add_tail(&uobj->uobject.list, &file->ucontext->cq_list);
+ up(&file->mutex);
+
+ up(&ib_uverbs_idr_mutex);
+
return in_len;
-err_list:
- down(&file->mutex);
- list_del(&uobj->uobject.list);
- up(&file->mutex);
-
- down(&ib_uverbs_idr_mutex);
+err_idr:
idr_remove(&ib_uverbs_cq_idr, uobj->uobject.id);
- up(&ib_uverbs_idr_mutex);
-err_cq:
+err_up:
+ up(&ib_uverbs_idr_mutex);
ib_destroy_cq(cq);
err:
@@ -692,6 +666,93 @@
return ret;
}
+ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_poll_cq cmd;
+ struct ib_uverbs_poll_cq_resp *resp;
+ struct ib_cq *cq;
+ struct ib_wc *wc;
+ int ret = 0;
+ int i;
+ int rsize;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ wc = kmalloc(cmd.ne * sizeof *wc, GFP_KERNEL);
+ if (!wc)
+ return -ENOMEM;
+
+ rsize = sizeof *resp + cmd.ne * sizeof(struct ib_uverbs_wc);
+ resp = kmalloc(rsize, GFP_KERNEL);
+ if (!resp) {
+ ret = -ENOMEM;
+ goto out_wc;
+ }
+
+ down(&ib_uverbs_idr_mutex);
+ cq = idr_find(&ib_uverbs_cq_idr, cmd.cq_handle);
+ if (!cq || cq->uobject->context != file->ucontext) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ resp->count = ib_poll_cq(cq, cmd.ne, wc);
+
+ for (i = 0; i < resp->count; i++) {
+ resp->wc[i].wr_id = wc[i].wr_id;
+ resp->wc[i].status = wc[i].status;
+ resp->wc[i].opcode = wc[i].opcode;
+ resp->wc[i].vendor_err = wc[i].vendor_err;
+ resp->wc[i].byte_len = wc[i].byte_len;
+ resp->wc[i].imm_data = wc[i].imm_data;
+ resp->wc[i].qp_num = wc[i].qp_num;
+ resp->wc[i].src_qp = wc[i].src_qp;
+ resp->wc[i].wc_flags = wc[i].wc_flags;
+ resp->wc[i].pkey_index = wc[i].pkey_index;
+ resp->wc[i].slid = wc[i].slid;
+ resp->wc[i].sl = wc[i].sl;
+ resp->wc[i].dlid_path_bits = wc[i].dlid_path_bits;
+ resp->wc[i].port_num = wc[i].port_num;
+ }
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response, resp, rsize))
+ ret = -EFAULT;
+
+out:
+ up(&ib_uverbs_idr_mutex);
+ kfree(resp);
+
+out_wc:
+ kfree(wc);
+ return ret ? ret : in_len;
+}
+
+ssize_t ib_uverbs_req_notify_cq(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_req_notify_cq cmd;
+ struct ib_cq *cq;
+ int ret = -EINVAL;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ down(&ib_uverbs_idr_mutex);
+ cq = idr_find(&ib_uverbs_cq_idr, cmd.cq_handle);
+ if (cq && cq->uobject->context == file->ucontext) {
+ ib_req_notify_cq(cq, cmd.solicited_only ?
+ IB_CQ_SOLICITED : IB_CQ_NEXT_COMP);
+ ret = in_len;
+ }
+ up(&ib_uverbs_idr_mutex);
+
+ return ret;
+}
+
ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
@@ -700,7 +761,7 @@
struct ib_uverbs_destroy_cq_resp resp;
struct ib_cq *cq;
struct ib_ucq_object *uobj;
- struct ib_uverbs_event *evt, *tmp;
+ struct ib_uverbs_event_file *ev_file;
u64 user_handle;
int ret = -EINVAL;
@@ -716,7 +777,8 @@
goto out;
user_handle = cq->uobject->user_handle;
- uobj = container_of(cq->uobject, struct ib_ucq_object, uobject);
+ uobj = container_of(cq->uobject, struct ib_ucq_object, uobject);
+ ev_file = cq->cq_context;
ret = ib_destroy_cq(cq);
if (ret)
@@ -728,19 +790,7 @@
list_del(&uobj->uobject.list);
up(&file->mutex);
- spin_lock_irq(&file->comp_file[0].lock);
- list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) {
- list_del(&evt->list);
- kfree(evt);
- }
- spin_unlock_irq(&file->comp_file[0].lock);
-
- spin_lock_irq(&file->async_file.lock);
- list_for_each_entry_safe(evt, tmp, &uobj->async_list, obj_list) {
- list_del(&evt->list);
- kfree(evt);
- }
- spin_unlock_irq(&file->async_file.lock);
+ ib_uverbs_release_ucq(file, ev_file, uobj);
resp.comp_events_reported = uobj->comp_events_reported;
resp.async_events_reported = uobj->async_events_reported;
@@ -859,24 +909,22 @@
resp.qp_handle = uobj->uobject.id;
- down(&file->mutex);
- list_add_tail(&uobj->uobject.list, &file->ucontext->qp_list);
- up(&file->mutex);
-
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
- goto err_list;
+ goto err_idr;
}
+ down(&file->mutex);
+ list_add_tail(&uobj->uobject.list, &file->ucontext->qp_list);
+ up(&file->mutex);
+
up(&ib_uverbs_idr_mutex);
return in_len;
-err_list:
- down(&file->mutex);
- list_del(&uobj->uobject.list);
- up(&file->mutex);
+err_idr:
+ idr_remove(&ib_uverbs_qp_idr, uobj->uobject.id);
err_destroy:
ib_destroy_qp(qp);
@@ -979,7 +1027,6 @@
struct ib_uverbs_destroy_qp_resp resp;
struct ib_qp *qp;
struct ib_uevent_object *uobj;
- struct ib_uverbs_event *evt, *tmp;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
@@ -1005,12 +1052,7 @@
list_del(&uobj->uobject.list);
up(&file->mutex);
- spin_lock_irq(&file->async_file.lock);
- list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) {
- list_del(&evt->list);
- kfree(evt);
- }
- spin_unlock_irq(&file->async_file.lock);
+ ib_uverbs_release_uevent(file, uobj);
resp.events_reported = uobj->events_reported;
@@ -1026,6 +1068,468 @@
return ret ? ret : in_len;
}
+ssize_t ib_uverbs_post_send(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_post_send cmd;
+ struct ib_uverbs_post_send_resp resp;
+ struct ib_uverbs_send_wr *user_wr;
+ struct ib_send_wr *wr = NULL, *last, *next, *bad_wr;
+ struct ib_qp *qp;
+ int i, sg_ind;
+ ssize_t ret = -EINVAL;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ if (in_len < sizeof cmd + cmd.wqe_size * cmd.wr_count +
+ cmd.sge_count * sizeof (struct ib_uverbs_sge))
+ return -EINVAL;
+
+ if (cmd.wqe_size < sizeof (struct ib_uverbs_send_wr))
+ return -EINVAL;
+
+ user_wr = kmalloc(cmd.wqe_size, GFP_KERNEL);
+ if (!user_wr)
+ return -ENOMEM;
+
+ down(&ib_uverbs_idr_mutex);
+
+ qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle);
+ if (!qp || qp->uobject->context != file->ucontext)
+ goto out;
+
+ sg_ind = 0;
+ last = NULL;
+ for (i = 0; i < cmd.wr_count; ++i) {
+ if (copy_from_user(user_wr,
+ buf + sizeof cmd + i * cmd.wqe_size,
+ cmd.wqe_size)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ if (user_wr->num_sge + sg_ind > cmd.sge_count) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) +
+ user_wr->num_sge * sizeof (struct ib_sge),
+ GFP_KERNEL);
+ if (!next) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (!last)
+ wr = next;
+ else
+ last->next = next;
+ last = next;
+
+ next->next = NULL;
+ next->wr_id = user_wr->wr_id;
+ next->num_sge = user_wr->num_sge;
+ next->opcode = user_wr->opcode;
+ next->send_flags = user_wr->send_flags;
+ next->imm_data = user_wr->imm_data;
+
+ if (qp->qp_type == IB_QPT_UD) {
+ next->wr.ud.ah = idr_find(&ib_uverbs_ah_idr,
+ user_wr->wr.ud.ah);
+ if (!next->wr.ud.ah) {
+ ret = -EINVAL;
+ goto out;
+ }
+ next->wr.ud.remote_qpn = user_wr->wr.ud.remote_qpn;
+ next->wr.ud.remote_qkey = user_wr->wr.ud.remote_qkey;
+ } else {
+ switch (next->opcode) {
+ case IB_WR_RDMA_WRITE:
+ case IB_WR_RDMA_WRITE_WITH_IMM:
+ case IB_WR_RDMA_READ:
+ next->wr.rdma.remote_addr =
+ user_wr->wr.rdma.remote_addr;
+ next->wr.rdma.rkey =
+ user_wr->wr.rdma.rkey;
+ break;
+ case IB_WR_ATOMIC_CMP_AND_SWP:
+ case IB_WR_ATOMIC_FETCH_AND_ADD:
+ next->wr.atomic.remote_addr =
+ user_wr->wr.atomic.remote_addr;
+ next->wr.atomic.compare_add =
+ user_wr->wr.atomic.compare_add;
+ next->wr.atomic.swap = user_wr->wr.atomic.swap;
+ next->wr.atomic.rkey = user_wr->wr.atomic.rkey;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (next->num_sge) {
+ next->sg_list = (void *) next +
+ ALIGN(sizeof *next, sizeof (struct ib_sge));
+ if (copy_from_user(next->sg_list,
+ buf + sizeof cmd +
+ cmd.wr_count * cmd.wqe_size +
+ sg_ind * sizeof (struct ib_sge),
+ next->num_sge * sizeof (struct ib_sge))) {
+ ret = -EFAULT;
+ goto out;
+ }
+ sg_ind += next->num_sge;
+ } else
+ next->sg_list = NULL;
+ }
+
+ resp.bad_wr = 0;
+ ret = qp->device->post_send(qp, wr, &bad_wr);
+ if (ret)
+ for (next = wr; next; next = next->next) {
+ ++resp.bad_wr;
+ if (next == bad_wr)
+ break;
+ }
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp))
+ ret = -EFAULT;
+
+out:
+ up(&ib_uverbs_idr_mutex);
+
+ while (wr) {
+ next = wr->next;
+ kfree(wr);
+ wr = next;
+ }
+
+ kfree(user_wr);
+
+ return ret ? ret : in_len;
+}
+
+static struct ib_recv_wr *ib_uverbs_unmarshall_recv(const char __user *buf,
+ int in_len,
+ u32 wr_count,
+ u32 sge_count,
+ u32 wqe_size)
+{
+ struct ib_uverbs_recv_wr *user_wr;
+ struct ib_recv_wr *wr = NULL, *last, *next;
+ int sg_ind;
+ int i;
+ int ret;
+
+ if (in_len < wqe_size * wr_count +
+ sge_count * sizeof (struct ib_uverbs_sge))
+ return ERR_PTR(-EINVAL);
+
+ if (wqe_size < sizeof (struct ib_uverbs_recv_wr))
+ return ERR_PTR(-EINVAL);
+
+ user_wr = kmalloc(wqe_size, GFP_KERNEL);
+ if (!user_wr)
+ return ERR_PTR(-ENOMEM);
+
+ sg_ind = 0;
+ last = NULL;
+ for (i = 0; i < wr_count; ++i) {
+ if (copy_from_user(user_wr, buf + i * wqe_size,
+ wqe_size)) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ if (user_wr->num_sge + sg_ind > sge_count) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) +
+ user_wr->num_sge * sizeof (struct ib_sge),
+ GFP_KERNEL);
+ if (!next) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (!last)
+ wr = next;
+ else
+ last->next = next;
+ last = next;
+
+ next->next = NULL;
+ next->wr_id = user_wr->wr_id;
+ next->num_sge = user_wr->num_sge;
+
+ if (next->num_sge) {
+ next->sg_list = (void *) next +
+ ALIGN(sizeof *next, sizeof (struct ib_sge));
+ if (copy_from_user(next->sg_list,
+ buf + wr_count * wqe_size +
+ sg_ind * sizeof (struct ib_sge),
+ next->num_sge * sizeof (struct ib_sge))) {
+ ret = -EFAULT;
+ goto err;
+ }
+ sg_ind += next->num_sge;
+ } else
+ next->sg_list = NULL;
+ }
+
+ kfree(user_wr);
+ return wr;
+
+err:
+ kfree(user_wr);
+
+ while (wr) {
+ next = wr->next;
+ kfree(wr);
+ wr = next;
+ }
+
+ return ERR_PTR(ret);
+}
+
+ssize_t ib_uverbs_post_recv(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_post_recv cmd;
+ struct ib_uverbs_post_recv_resp resp;
+ struct ib_recv_wr *wr, *next, *bad_wr;
+ struct ib_qp *qp;
+ ssize_t ret = -EINVAL;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ wr = ib_uverbs_unmarshall_recv(buf + sizeof cmd,
+ in_len - sizeof cmd, cmd.wr_count,
+ cmd.sge_count, cmd.wqe_size);
+ if (IS_ERR(wr))
+ return PTR_ERR(wr);
+
+ down(&ib_uverbs_idr_mutex);
+
+ qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle);
+ if (!qp || qp->uobject->context != file->ucontext)
+ goto out;
+
+ resp.bad_wr = 0;
+ ret = qp->device->post_recv(qp, wr, &bad_wr);
+ if (ret)
+ for (next = wr; next; next = next->next) {
+ ++resp.bad_wr;
+ if (next == bad_wr)
+ break;
+ }
+
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp))
+ ret = -EFAULT;
+
+out:
+ up(&ib_uverbs_idr_mutex);
+
+ while (wr) {
+ next = wr->next;
+ kfree(wr);
+ wr = next;
+ }
+
+ return ret ? ret : in_len;
+}
+
+ssize_t ib_uverbs_post_srq_recv(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_post_srq_recv cmd;
+ struct ib_uverbs_post_srq_recv_resp resp;
+ struct ib_recv_wr *wr, *next, *bad_wr;
+ struct ib_srq *srq;
+ ssize_t ret = -EINVAL;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ wr = ib_uverbs_unmarshall_recv(buf + sizeof cmd,
+ in_len - sizeof cmd, cmd.wr_count,
+ cmd.sge_count, cmd.wqe_size);
+ if (IS_ERR(wr))
+ return PTR_ERR(wr);
+
+ down(&ib_uverbs_idr_mutex);
+
+ srq = idr_find(&ib_uverbs_srq_idr, cmd.srq_handle);
+ if (!srq || srq->uobject->context != file->ucontext)
+ goto out;
+
+ resp.bad_wr = 0;
+ ret = srq->device->post_srq_recv(srq, wr, &bad_wr);
+ if (ret)
+ for (next = wr; next; next = next->next) {
+ ++resp.bad_wr;
+ if (next == bad_wr)
+ break;
+ }
+
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp))
+ ret = -EFAULT;
+
+out:
+ up(&ib_uverbs_idr_mutex);
+
+ while (wr) {
+ next = wr->next;
+ kfree(wr);
+ wr = next;
+ }
+
+ return ret ? ret : in_len;
+}
+
+ssize_t ib_uverbs_create_ah(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_create_ah cmd;
+ struct ib_uverbs_create_ah_resp resp;
+ struct ib_uobject *uobj;
+ struct ib_pd *pd;
+ struct ib_ah *ah;
+ struct ib_ah_attr attr;
+ int ret;
+
+ if (out_len < sizeof resp)
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ uobj = kmalloc(sizeof *uobj, GFP_KERNEL);
+ if (!uobj)
+ return -ENOMEM;
+
+ down(&ib_uverbs_idr_mutex);
+
+ pd = idr_find(&ib_uverbs_pd_idr, cmd.pd_handle);
+ if (!pd || pd->uobject->context != file->ucontext) {
+ ret = -EINVAL;
+ goto err_up;
+ }
+
+ uobj->user_handle = cmd.user_handle;
+ uobj->context = file->ucontext;
+
+ attr.dlid = cmd.attr.dlid;
+ attr.sl = cmd.attr.sl;
+ attr.src_path_bits = cmd.attr.src_path_bits;
+ attr.static_rate = cmd.attr.static_rate;
+ attr.port_num = cmd.attr.port_num;
+ attr.grh.flow_label = cmd.attr.grh.flow_label;
+ attr.grh.sgid_index = cmd.attr.grh.sgid_index;
+ attr.grh.hop_limit = cmd.attr.grh.hop_limit;
+ attr.grh.traffic_class = cmd.attr.grh.traffic_class;
+ memcpy(attr.grh.dgid.raw, cmd.attr.grh.dgid, 16);
+
+ ah = ib_create_ah(pd, &attr);
+ if (IS_ERR(ah)) {
+ ret = PTR_ERR(ah);
+ goto err_up;
+ }
+
+ ah->uobject = uobj;
+
+retry:
+ if (!idr_pre_get(&ib_uverbs_ah_idr, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto err_destroy;
+ }
+
+ ret = idr_get_new(&ib_uverbs_ah_idr, ah, &uobj->id);
+
+ if (ret == -EAGAIN)
+ goto retry;
+ if (ret)
+ goto err_destroy;
+
+ resp.ah_handle = uobj->id;
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp)) {
+ ret = -EFAULT;
+ goto err_idr;
+ }
+
+ down(&file->mutex);
+ list_add_tail(&uobj->list, &file->ucontext->ah_list);
+ up(&file->mutex);
+
+ up(&ib_uverbs_idr_mutex);
+
+ return in_len;
+
+err_idr:
+ idr_remove(&ib_uverbs_ah_idr, uobj->id);
+
+err_destroy:
+ ib_destroy_ah(ah);
+
+err_up:
+ up(&ib_uverbs_idr_mutex);
+
+ kfree(uobj);
+ return ret;
+}
+
+ssize_t ib_uverbs_destroy_ah(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len, int out_len)
+{
+ struct ib_uverbs_destroy_ah cmd;
+ struct ib_ah *ah;
+ struct ib_uobject *uobj;
+ int ret = -EINVAL;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ down(&ib_uverbs_idr_mutex);
+
+ ah = idr_find(&ib_uverbs_ah_idr, cmd.ah_handle);
+ if (!ah || ah->uobject->context != file->ucontext)
+ goto out;
+
+ uobj = ah->uobject;
+
+ ret = ib_destroy_ah(ah);
+ if (ret)
+ goto out;
+
+ idr_remove(&ib_uverbs_ah_idr, cmd.ah_handle);
+
+ down(&file->mutex);
+ list_del(&uobj->list);
+ up(&file->mutex);
+
+ kfree(uobj);
+
+out:
+ up(&ib_uverbs_idr_mutex);
+
+ return ret ? ret : in_len;
+}
+
ssize_t ib_uverbs_attach_mcast(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
@@ -1148,24 +1652,22 @@
resp.srq_handle = uobj->uobject.id;
- down(&file->mutex);
- list_add_tail(&uobj->uobject.list, &file->ucontext->srq_list);
- up(&file->mutex);
-
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
- goto err_list;
+ goto err_idr;
}
+ down(&file->mutex);
+ list_add_tail(&uobj->uobject.list, &file->ucontext->srq_list);
+ up(&file->mutex);
+
up(&ib_uverbs_idr_mutex);
return in_len;
-err_list:
- down(&file->mutex);
- list_del(&uobj->uobject.list);
- up(&file->mutex);
+err_idr:
+ idr_remove(&ib_uverbs_srq_idr, uobj->uobject.id);
err_destroy:
ib_destroy_srq(srq);
@@ -1217,7 +1719,6 @@
struct ib_uverbs_destroy_srq_resp resp;
struct ib_srq *srq;
struct ib_uevent_object *uobj;
- struct ib_uverbs_event *evt, *tmp;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
@@ -1243,12 +1744,7 @@
list_del(&uobj->uobject.list);
up(&file->mutex);
- spin_lock_irq(&file->async_file.lock);
- list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) {
- list_del(&evt->list);
- kfree(evt);
- }
- spin_unlock_irq(&file->async_file.lock);
+ ib_uverbs_release_uevent(file, uobj);
resp.events_reported = uobj->events_reported;
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 1251180..0eb38f4 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -3,6 +3,7 @@
* Copyright (c) 2005 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
* Copyright (c) 2005 Voltaire, Inc. All rights reserved.
+ * Copyright (c) 2005 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -43,6 +44,7 @@
#include <linux/poll.h>
#include <linux/file.h>
#include <linux/mount.h>
+#include <linux/cdev.h>
#include <asm/uaccess.h>
@@ -62,6 +64,8 @@
#define IB_UVERBS_BASE_DEV MKDEV(IB_UVERBS_MAJOR, IB_UVERBS_BASE_MINOR)
+static struct class *uverbs_class;
+
DECLARE_MUTEX(ib_uverbs_idr_mutex);
DEFINE_IDR(ib_uverbs_pd_idr);
DEFINE_IDR(ib_uverbs_mr_idr);
@@ -72,31 +76,37 @@
DEFINE_IDR(ib_uverbs_srq_idr);
static spinlock_t map_lock;
+static struct ib_uverbs_device *dev_table[IB_UVERBS_MAX_DEVICES];
static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES);
static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len) = {
- [IB_USER_VERBS_CMD_QUERY_PARAMS] = ib_uverbs_query_params,
- [IB_USER_VERBS_CMD_GET_CONTEXT] = ib_uverbs_get_context,
- [IB_USER_VERBS_CMD_QUERY_DEVICE] = ib_uverbs_query_device,
- [IB_USER_VERBS_CMD_QUERY_PORT] = ib_uverbs_query_port,
- [IB_USER_VERBS_CMD_QUERY_GID] = ib_uverbs_query_gid,
- [IB_USER_VERBS_CMD_QUERY_PKEY] = ib_uverbs_query_pkey,
- [IB_USER_VERBS_CMD_ALLOC_PD] = ib_uverbs_alloc_pd,
- [IB_USER_VERBS_CMD_DEALLOC_PD] = ib_uverbs_dealloc_pd,
- [IB_USER_VERBS_CMD_REG_MR] = ib_uverbs_reg_mr,
- [IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr,
- [IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq,
- [IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq,
- [IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp,
- [IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp,
- [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp,
- [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast,
- [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast,
- [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq,
- [IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq,
- [IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq,
+ [IB_USER_VERBS_CMD_GET_CONTEXT] = ib_uverbs_get_context,
+ [IB_USER_VERBS_CMD_QUERY_DEVICE] = ib_uverbs_query_device,
+ [IB_USER_VERBS_CMD_QUERY_PORT] = ib_uverbs_query_port,
+ [IB_USER_VERBS_CMD_ALLOC_PD] = ib_uverbs_alloc_pd,
+ [IB_USER_VERBS_CMD_DEALLOC_PD] = ib_uverbs_dealloc_pd,
+ [IB_USER_VERBS_CMD_REG_MR] = ib_uverbs_reg_mr,
+ [IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr,
+ [IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL] = ib_uverbs_create_comp_channel,
+ [IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq,
+ [IB_USER_VERBS_CMD_POLL_CQ] = ib_uverbs_poll_cq,
+ [IB_USER_VERBS_CMD_REQ_NOTIFY_CQ] = ib_uverbs_req_notify_cq,
+ [IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq,
+ [IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp,
+ [IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp,
+ [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp,
+ [IB_USER_VERBS_CMD_POST_SEND] = ib_uverbs_post_send,
+ [IB_USER_VERBS_CMD_POST_RECV] = ib_uverbs_post_recv,
+ [IB_USER_VERBS_CMD_POST_SRQ_RECV] = ib_uverbs_post_srq_recv,
+ [IB_USER_VERBS_CMD_CREATE_AH] = ib_uverbs_create_ah,
+ [IB_USER_VERBS_CMD_DESTROY_AH] = ib_uverbs_destroy_ah,
+ [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast,
+ [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast,
+ [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq,
+ [IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq,
+ [IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq,
};
static struct vfsmount *uverbs_event_mnt;
@@ -104,7 +114,54 @@
static void ib_uverbs_add_one(struct ib_device *device);
static void ib_uverbs_remove_one(struct ib_device *device);
-static int ib_dealloc_ucontext(struct ib_ucontext *context)
+static void ib_uverbs_release_dev(struct kref *ref)
+{
+ struct ib_uverbs_device *dev =
+ container_of(ref, struct ib_uverbs_device, ref);
+
+ kfree(dev);
+}
+
+void ib_uverbs_release_ucq(struct ib_uverbs_file *file,
+ struct ib_uverbs_event_file *ev_file,
+ struct ib_ucq_object *uobj)
+{
+ struct ib_uverbs_event *evt, *tmp;
+
+ if (ev_file) {
+ spin_lock_irq(&ev_file->lock);
+ list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) {
+ list_del(&evt->list);
+ kfree(evt);
+ }
+ spin_unlock_irq(&ev_file->lock);
+
+ kref_put(&ev_file->ref, ib_uverbs_release_event_file);
+ }
+
+ spin_lock_irq(&file->async_file->lock);
+ list_for_each_entry_safe(evt, tmp, &uobj->async_list, obj_list) {
+ list_del(&evt->list);
+ kfree(evt);
+ }
+ spin_unlock_irq(&file->async_file->lock);
+}
+
+void ib_uverbs_release_uevent(struct ib_uverbs_file *file,
+ struct ib_uevent_object *uobj)
+{
+ struct ib_uverbs_event *evt, *tmp;
+
+ spin_lock_irq(&file->async_file->lock);
+ list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) {
+ list_del(&evt->list);
+ kfree(evt);
+ }
+ spin_unlock_irq(&file->async_file->lock);
+}
+
+static int ib_uverbs_cleanup_ucontext(struct ib_uverbs_file *file,
+ struct ib_ucontext *context)
{
struct ib_uobject *uobj, *tmp;
@@ -113,30 +170,46 @@
down(&ib_uverbs_idr_mutex);
- /* XXX Free AHs */
+ list_for_each_entry_safe(uobj, tmp, &context->ah_list, list) {
+ struct ib_ah *ah = idr_find(&ib_uverbs_ah_idr, uobj->id);
+ idr_remove(&ib_uverbs_ah_idr, uobj->id);
+ ib_destroy_ah(ah);
+ list_del(&uobj->list);
+ kfree(uobj);
+ }
list_for_each_entry_safe(uobj, tmp, &context->qp_list, list) {
struct ib_qp *qp = idr_find(&ib_uverbs_qp_idr, uobj->id);
+ struct ib_uevent_object *uevent =
+ container_of(uobj, struct ib_uevent_object, uobject);
idr_remove(&ib_uverbs_qp_idr, uobj->id);
ib_destroy_qp(qp);
list_del(&uobj->list);
- kfree(container_of(uobj, struct ib_uevent_object, uobject));
+ ib_uverbs_release_uevent(file, uevent);
+ kfree(uevent);
}
list_for_each_entry_safe(uobj, tmp, &context->cq_list, list) {
struct ib_cq *cq = idr_find(&ib_uverbs_cq_idr, uobj->id);
+ struct ib_uverbs_event_file *ev_file = cq->cq_context;
+ struct ib_ucq_object *ucq =
+ container_of(uobj, struct ib_ucq_object, uobject);
idr_remove(&ib_uverbs_cq_idr, uobj->id);
ib_destroy_cq(cq);
list_del(&uobj->list);
- kfree(container_of(uobj, struct ib_ucq_object, uobject));
+ ib_uverbs_release_ucq(file, ev_file, ucq);
+ kfree(ucq);
}
list_for_each_entry_safe(uobj, tmp, &context->srq_list, list) {
struct ib_srq *srq = idr_find(&ib_uverbs_srq_idr, uobj->id);
+ struct ib_uevent_object *uevent =
+ container_of(uobj, struct ib_uevent_object, uobject);
idr_remove(&ib_uverbs_srq_idr, uobj->id);
ib_destroy_srq(srq);
list_del(&uobj->list);
- kfree(container_of(uobj, struct ib_uevent_object, uobject));
+ ib_uverbs_release_uevent(file, uevent);
+ kfree(uevent);
}
/* XXX Free MWs */
@@ -175,6 +248,8 @@
container_of(ref, struct ib_uverbs_file, ref);
module_put(file->device->ib_dev->owner);
+ kref_put(&file->device->ref, ib_uverbs_release_dev);
+
kfree(file);
}
@@ -188,25 +263,19 @@
spin_lock_irq(&file->lock);
- while (list_empty(&file->event_list) && file->fd >= 0) {
+ while (list_empty(&file->event_list)) {
spin_unlock_irq(&file->lock);
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
if (wait_event_interruptible(file->poll_wait,
- !list_empty(&file->event_list) ||
- file->fd < 0))
+ !list_empty(&file->event_list)))
return -ERESTARTSYS;
spin_lock_irq(&file->lock);
}
- if (file->fd < 0) {
- spin_unlock_irq(&file->lock);
- return -ENODEV;
- }
-
event = list_entry(file->event_list.next, struct ib_uverbs_event, list);
if (file->is_async)
@@ -248,26 +317,19 @@
poll_wait(filp, &file->poll_wait, wait);
spin_lock_irq(&file->lock);
- if (file->fd < 0)
- pollflags = POLLERR;
- else if (!list_empty(&file->event_list))
+ if (!list_empty(&file->event_list))
pollflags = POLLIN | POLLRDNORM;
spin_unlock_irq(&file->lock);
return pollflags;
}
-static void ib_uverbs_event_release(struct ib_uverbs_event_file *file)
+void ib_uverbs_release_event_file(struct kref *ref)
{
- struct ib_uverbs_event *entry, *tmp;
+ struct ib_uverbs_event_file *file =
+ container_of(ref, struct ib_uverbs_event_file, ref);
- spin_lock_irq(&file->lock);
- if (file->fd != -1) {
- file->fd = -1;
- list_for_each_entry_safe(entry, tmp, &file->event_list, list)
- kfree(entry);
- }
- spin_unlock_irq(&file->lock);
+ kfree(file);
}
static int ib_uverbs_event_fasync(int fd, struct file *filp, int on)
@@ -280,21 +342,30 @@
static int ib_uverbs_event_close(struct inode *inode, struct file *filp)
{
struct ib_uverbs_event_file *file = filp->private_data;
+ struct ib_uverbs_event *entry, *tmp;
- ib_uverbs_event_release(file);
+ spin_lock_irq(&file->lock);
+ file->file = NULL;
+ list_for_each_entry_safe(entry, tmp, &file->event_list, list) {
+ if (entry->counter)
+ list_del(&entry->obj_list);
+ kfree(entry);
+ }
+ spin_unlock_irq(&file->lock);
+
ib_uverbs_event_fasync(-1, filp, 0);
- kref_put(&file->uverbs_file->ref, ib_uverbs_release_file);
+
+ if (file->is_async) {
+ ib_unregister_event_handler(&file->uverbs_file->event_handler);
+ kref_put(&file->uverbs_file->ref, ib_uverbs_release_file);
+ }
+ kref_put(&file->ref, ib_uverbs_release_event_file);
return 0;
}
static struct file_operations uverbs_event_fops = {
- /*
- * No .owner field since we artificially create event files,
- * so there is no increment to the module reference count in
- * the open path. All event files come from a uverbs command
- * file, which already takes a module reference, so this is OK.
- */
+ .owner = THIS_MODULE,
.read = ib_uverbs_event_read,
.poll = ib_uverbs_event_poll,
.release = ib_uverbs_event_close,
@@ -303,27 +374,37 @@
void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context)
{
- struct ib_uverbs_file *file = cq_context;
- struct ib_ucq_object *uobj;
- struct ib_uverbs_event *entry;
- unsigned long flags;
+ struct ib_uverbs_event_file *file = cq_context;
+ struct ib_ucq_object *uobj;
+ struct ib_uverbs_event *entry;
+ unsigned long flags;
+
+ if (!file)
+ return;
+
+ spin_lock_irqsave(&file->lock, flags);
+ if (!file->file) {
+ spin_unlock_irqrestore(&file->lock, flags);
+ return;
+ }
entry = kmalloc(sizeof *entry, GFP_ATOMIC);
- if (!entry)
+ if (!entry) {
+ spin_unlock_irqrestore(&file->lock, flags);
return;
+ }
uobj = container_of(cq->uobject, struct ib_ucq_object, uobject);
entry->desc.comp.cq_handle = cq->uobject->user_handle;
entry->counter = &uobj->comp_events_reported;
- spin_lock_irqsave(&file->comp_file[0].lock, flags);
- list_add_tail(&entry->list, &file->comp_file[0].event_list);
+ list_add_tail(&entry->list, &file->event_list);
list_add_tail(&entry->obj_list, &uobj->comp_list);
- spin_unlock_irqrestore(&file->comp_file[0].lock, flags);
+ spin_unlock_irqrestore(&file->lock, flags);
- wake_up_interruptible(&file->comp_file[0].poll_wait);
- kill_fasync(&file->comp_file[0].async_queue, SIGIO, POLL_IN);
+ wake_up_interruptible(&file->poll_wait);
+ kill_fasync(&file->async_queue, SIGIO, POLL_IN);
}
static void ib_uverbs_async_handler(struct ib_uverbs_file *file,
@@ -334,32 +415,40 @@
struct ib_uverbs_event *entry;
unsigned long flags;
- entry = kmalloc(sizeof *entry, GFP_ATOMIC);
- if (!entry)
+ spin_lock_irqsave(&file->async_file->lock, flags);
+ if (!file->async_file->file) {
+ spin_unlock_irqrestore(&file->async_file->lock, flags);
return;
+ }
+
+ entry = kmalloc(sizeof *entry, GFP_ATOMIC);
+ if (!entry) {
+ spin_unlock_irqrestore(&file->async_file->lock, flags);
+ return;
+ }
entry->desc.async.element = element;
entry->desc.async.event_type = event;
entry->counter = counter;
- spin_lock_irqsave(&file->async_file.lock, flags);
- list_add_tail(&entry->list, &file->async_file.event_list);
+ list_add_tail(&entry->list, &file->async_file->event_list);
if (obj_list)
list_add_tail(&entry->obj_list, obj_list);
- spin_unlock_irqrestore(&file->async_file.lock, flags);
+ spin_unlock_irqrestore(&file->async_file->lock, flags);
- wake_up_interruptible(&file->async_file.poll_wait);
- kill_fasync(&file->async_file.async_queue, SIGIO, POLL_IN);
+ wake_up_interruptible(&file->async_file->poll_wait);
+ kill_fasync(&file->async_file->async_queue, SIGIO, POLL_IN);
}
void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr)
{
+ struct ib_uverbs_event_file *ev_file = context_ptr;
struct ib_ucq_object *uobj;
uobj = container_of(event->element.cq->uobject,
struct ib_ucq_object, uobject);
- ib_uverbs_async_handler(context_ptr, uobj->uobject.user_handle,
+ ib_uverbs_async_handler(ev_file->uverbs_file, uobj->uobject.user_handle,
event->event, &uobj->async_list,
&uobj->async_events_reported);
@@ -389,8 +478,8 @@
&uobj->events_reported);
}
-static void ib_uverbs_event_handler(struct ib_event_handler *handler,
- struct ib_event *event)
+void ib_uverbs_event_handler(struct ib_event_handler *handler,
+ struct ib_event *event)
{
struct ib_uverbs_file *file =
container_of(handler, struct ib_uverbs_file, event_handler);
@@ -399,38 +488,90 @@
NULL, NULL);
}
-static int ib_uverbs_event_init(struct ib_uverbs_event_file *file,
- struct ib_uverbs_file *uverbs_file)
+struct file *ib_uverbs_alloc_event_file(struct ib_uverbs_file *uverbs_file,
+ int is_async, int *fd)
{
+ struct ib_uverbs_event_file *ev_file;
struct file *filp;
+ int ret;
- spin_lock_init(&file->lock);
- INIT_LIST_HEAD(&file->event_list);
- init_waitqueue_head(&file->poll_wait);
- file->uverbs_file = uverbs_file;
- file->async_queue = NULL;
+ ev_file = kmalloc(sizeof *ev_file, GFP_KERNEL);
+ if (!ev_file)
+ return ERR_PTR(-ENOMEM);
- file->fd = get_unused_fd();
- if (file->fd < 0)
- return file->fd;
+ kref_init(&ev_file->ref);
+ spin_lock_init(&ev_file->lock);
+ INIT_LIST_HEAD(&ev_file->event_list);
+ init_waitqueue_head(&ev_file->poll_wait);
+ ev_file->uverbs_file = uverbs_file;
+ ev_file->async_queue = NULL;
+ ev_file->is_async = is_async;
+
+ *fd = get_unused_fd();
+ if (*fd < 0) {
+ ret = *fd;
+ goto err;
+ }
filp = get_empty_filp();
if (!filp) {
- put_unused_fd(file->fd);
- return -ENFILE;
+ ret = -ENFILE;
+ goto err_fd;
}
- filp->f_op = &uverbs_event_fops;
+ ev_file->file = filp;
+
+ /*
+ * fops_get() can't fail here, because we're coming from a
+ * system call on a uverbs file, which will already have a
+ * module reference.
+ */
+ filp->f_op = fops_get(&uverbs_event_fops);
filp->f_vfsmnt = mntget(uverbs_event_mnt);
filp->f_dentry = dget(uverbs_event_mnt->mnt_root);
filp->f_mapping = filp->f_dentry->d_inode->i_mapping;
filp->f_flags = O_RDONLY;
filp->f_mode = FMODE_READ;
- filp->private_data = file;
+ filp->private_data = ev_file;
- fd_install(file->fd, filp);
+ return filp;
- return 0;
+err_fd:
+ put_unused_fd(*fd);
+
+err:
+ kfree(ev_file);
+ return ERR_PTR(ret);
+}
+
+/*
+ * Look up a completion event file by FD. If lookup is successful,
+ * takes a ref to the event file struct that it returns; if
+ * unsuccessful, returns NULL.
+ */
+struct ib_uverbs_event_file *ib_uverbs_lookup_comp_file(int fd)
+{
+ struct ib_uverbs_event_file *ev_file = NULL;
+ struct file *filp;
+
+ filp = fget(fd);
+ if (!filp)
+ return NULL;
+
+ if (filp->f_op != &uverbs_event_fops)
+ goto out;
+
+ ev_file = filp->private_data;
+ if (ev_file->is_async) {
+ ev_file = NULL;
+ goto out;
+ }
+
+ kref_get(&ev_file->ref);
+
+out:
+ fput(filp);
+ return ev_file;
}
static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf,
@@ -450,11 +591,11 @@
if (hdr.command < 0 ||
hdr.command >= ARRAY_SIZE(uverbs_cmd_table) ||
- !uverbs_cmd_table[hdr.command])
+ !uverbs_cmd_table[hdr.command] ||
+ !(file->device->ib_dev->uverbs_cmd_mask & (1ull << hdr.command)))
return -EINVAL;
- if (!file->ucontext &&
- hdr.command != IB_USER_VERBS_CMD_QUERY_PARAMS &&
+ if (!file->ucontext &&
hdr.command != IB_USER_VERBS_CMD_GET_CONTEXT)
return -EINVAL;
@@ -474,84 +615,57 @@
static int ib_uverbs_open(struct inode *inode, struct file *filp)
{
- struct ib_uverbs_device *dev =
- container_of(inode->i_cdev, struct ib_uverbs_device, dev);
+ struct ib_uverbs_device *dev;
struct ib_uverbs_file *file;
- int i = 0;
int ret;
- if (!try_module_get(dev->ib_dev->owner))
- return -ENODEV;
+ spin_lock(&map_lock);
+ dev = dev_table[iminor(inode) - IB_UVERBS_BASE_MINOR];
+ if (dev)
+ kref_get(&dev->ref);
+ spin_unlock(&map_lock);
- file = kmalloc(sizeof *file +
- (dev->num_comp - 1) * sizeof (struct ib_uverbs_event_file),
- GFP_KERNEL);
- if (!file) {
- ret = -ENOMEM;
+ if (!dev)
+ return -ENXIO;
+
+ if (!try_module_get(dev->ib_dev->owner)) {
+ ret = -ENODEV;
goto err;
}
- file->device = dev;
+ file = kmalloc(sizeof *file, GFP_KERNEL);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err_module;
+ }
+
+ file->device = dev;
+ file->ucontext = NULL;
+ file->async_file = NULL;
kref_init(&file->ref);
init_MUTEX(&file->mutex);
- file->ucontext = NULL;
-
- kref_get(&file->ref);
- ret = ib_uverbs_event_init(&file->async_file, file);
- if (ret)
- goto err_kref;
-
- file->async_file.is_async = 1;
-
- for (i = 0; i < dev->num_comp; ++i) {
- kref_get(&file->ref);
- ret = ib_uverbs_event_init(&file->comp_file[i], file);
- if (ret)
- goto err_async;
- file->comp_file[i].is_async = 0;
- }
-
-
filp->private_data = file;
- INIT_IB_EVENT_HANDLER(&file->event_handler, dev->ib_dev,
- ib_uverbs_event_handler);
- if (ib_register_event_handler(&file->event_handler))
- goto err_async;
-
return 0;
-err_async:
- while (i--)
- ib_uverbs_event_release(&file->comp_file[i]);
-
- ib_uverbs_event_release(&file->async_file);
-
-err_kref:
- /*
- * One extra kref_put() because we took a reference before the
- * event file creation that failed and got us here.
- */
- kref_put(&file->ref, ib_uverbs_release_file);
- kref_put(&file->ref, ib_uverbs_release_file);
+err_module:
+ module_put(dev->ib_dev->owner);
err:
- module_put(dev->ib_dev->owner);
+ kref_put(&dev->ref, ib_uverbs_release_dev);
+
return ret;
}
static int ib_uverbs_close(struct inode *inode, struct file *filp)
{
struct ib_uverbs_file *file = filp->private_data;
- int i;
- ib_unregister_event_handler(&file->event_handler);
- ib_uverbs_event_release(&file->async_file);
- ib_dealloc_ucontext(file->ucontext);
+ ib_uverbs_cleanup_ucontext(file, file->ucontext);
- for (i = 0; i < file->device->num_comp; ++i)
- ib_uverbs_event_release(&file->comp_file[i]);
+ if (file->async_file)
+ kref_put(&file->async_file->ref, ib_uverbs_release_event_file);
kref_put(&file->ref, ib_uverbs_release_file);
@@ -581,27 +695,25 @@
static ssize_t show_ibdev(struct class_device *class_dev, char *buf)
{
- struct ib_uverbs_device *dev =
- container_of(class_dev, struct ib_uverbs_device, class_dev);
+ struct ib_uverbs_device *dev = class_get_devdata(class_dev);
+
+ if (!dev)
+ return -ENODEV;
return sprintf(buf, "%s\n", dev->ib_dev->name);
}
static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL);
-static void ib_uverbs_release_class_dev(struct class_device *class_dev)
+static ssize_t show_dev_abi_version(struct class_device *class_dev, char *buf)
{
- struct ib_uverbs_device *dev =
- container_of(class_dev, struct ib_uverbs_device, class_dev);
+ struct ib_uverbs_device *dev = class_get_devdata(class_dev);
- cdev_del(&dev->dev);
- clear_bit(dev->devnum, dev_map);
- kfree(dev);
+ if (!dev)
+ return -ENODEV;
+
+ return sprintf(buf, "%d\n", dev->ib_dev->uverbs_abi_ver);
}
-
-static struct class uverbs_class = {
- .name = "infiniband_verbs",
- .release = ib_uverbs_release_class_dev
-};
+static CLASS_DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL);
static ssize_t show_abi_version(struct class *class, char *buf)
{
@@ -622,6 +734,8 @@
memset(uverbs_dev, 0, sizeof *uverbs_dev);
+ kref_init(&uverbs_dev->ref);
+
spin_lock(&map_lock);
uverbs_dev->devnum = find_first_zero_bit(dev_map, IB_UVERBS_MAX_DEVICES);
if (uverbs_dev->devnum >= IB_UVERBS_MAX_DEVICES) {
@@ -631,41 +745,49 @@
set_bit(uverbs_dev->devnum, dev_map);
spin_unlock(&map_lock);
- uverbs_dev->ib_dev = device;
- uverbs_dev->num_comp = 1;
+ uverbs_dev->ib_dev = device;
+ uverbs_dev->num_comp_vectors = 1;
- if (device->mmap)
- cdev_init(&uverbs_dev->dev, &uverbs_mmap_fops);
- else
- cdev_init(&uverbs_dev->dev, &uverbs_fops);
- uverbs_dev->dev.owner = THIS_MODULE;
- kobject_set_name(&uverbs_dev->dev.kobj, "uverbs%d", uverbs_dev->devnum);
- if (cdev_add(&uverbs_dev->dev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1))
+ uverbs_dev->dev = cdev_alloc();
+ if (!uverbs_dev->dev)
goto err;
-
- uverbs_dev->class_dev.class = &uverbs_class;
- uverbs_dev->class_dev.dev = device->dma_device;
- uverbs_dev->class_dev.devt = uverbs_dev->dev.dev;
- snprintf(uverbs_dev->class_dev.class_id, BUS_ID_SIZE, "uverbs%d", uverbs_dev->devnum);
- if (class_device_register(&uverbs_dev->class_dev))
+ uverbs_dev->dev->owner = THIS_MODULE;
+ uverbs_dev->dev->ops = device->mmap ? &uverbs_mmap_fops : &uverbs_fops;
+ kobject_set_name(&uverbs_dev->dev->kobj, "uverbs%d", uverbs_dev->devnum);
+ if (cdev_add(uverbs_dev->dev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1))
goto err_cdev;
- if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_ibdev))
+ uverbs_dev->class_dev = class_device_create(uverbs_class, NULL,
+ uverbs_dev->dev->dev,
+ device->dma_device,
+ "uverbs%d", uverbs_dev->devnum);
+ if (IS_ERR(uverbs_dev->class_dev))
+ goto err_cdev;
+
+ class_set_devdata(uverbs_dev->class_dev, uverbs_dev);
+
+ if (class_device_create_file(uverbs_dev->class_dev, &class_device_attr_ibdev))
goto err_class;
+ if (class_device_create_file(uverbs_dev->class_dev, &class_device_attr_abi_version))
+ goto err_class;
+
+ spin_lock(&map_lock);
+ dev_table[uverbs_dev->devnum] = uverbs_dev;
+ spin_unlock(&map_lock);
ib_set_client_data(device, &uverbs_client, uverbs_dev);
return;
err_class:
- class_device_unregister(&uverbs_dev->class_dev);
+ class_device_destroy(uverbs_class, uverbs_dev->dev->dev);
err_cdev:
- cdev_del(&uverbs_dev->dev);
+ cdev_del(uverbs_dev->dev);
clear_bit(uverbs_dev->devnum, dev_map);
err:
- kfree(uverbs_dev);
+ kref_put(&uverbs_dev->ref, ib_uverbs_release_dev);
return;
}
@@ -676,7 +798,16 @@
if (!uverbs_dev)
return;
- class_device_unregister(&uverbs_dev->class_dev);
+ class_set_devdata(uverbs_dev->class_dev, NULL);
+ class_device_destroy(uverbs_class, uverbs_dev->dev->dev);
+ cdev_del(uverbs_dev->dev);
+
+ spin_lock(&map_lock);
+ dev_table[uverbs_dev->devnum] = NULL;
+ spin_unlock(&map_lock);
+
+ clear_bit(uverbs_dev->devnum, dev_map);
+ kref_put(&uverbs_dev->ref, ib_uverbs_release_dev);
}
static struct super_block *uverbs_event_get_sb(struct file_system_type *fs_type, int flags,
@@ -706,13 +837,14 @@
goto out;
}
- ret = class_register(&uverbs_class);
- if (ret) {
+ uverbs_class = class_create(THIS_MODULE, "infiniband_verbs");
+ if (IS_ERR(uverbs_class)) {
+ ret = PTR_ERR(uverbs_class);
printk(KERN_ERR "user_verbs: couldn't create class infiniband_verbs\n");
goto out_chrdev;
}
- ret = class_create_file(&uverbs_class, &class_attr_abi_version);
+ ret = class_create_file(uverbs_class, &class_attr_abi_version);
if (ret) {
printk(KERN_ERR "user_verbs: couldn't create abi_version attribute\n");
goto out_class;
@@ -746,7 +878,7 @@
unregister_filesystem(&uverbs_event_fs);
out_class:
- class_unregister(&uverbs_class);
+ class_destroy(uverbs_class);
out_chrdev:
unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES);
@@ -760,8 +892,15 @@
ib_unregister_client(&uverbs_client);
mntput(uverbs_event_mnt);
unregister_filesystem(&uverbs_event_fs);
- class_unregister(&uverbs_class);
+ class_destroy(uverbs_class);
unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES);
+ idr_destroy(&ib_uverbs_pd_idr);
+ idr_destroy(&ib_uverbs_mr_idr);
+ idr_destroy(&ib_uverbs_mw_idr);
+ idr_destroy(&ib_uverbs_ah_idr);
+ idr_destroy(&ib_uverbs_cq_idr);
+ idr_destroy(&ib_uverbs_qp_idr);
+ idr_destroy(&ib_uverbs_srq_idr);
}
module_init(ib_uverbs_init);
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 5081d90..72d3ef7 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -523,16 +523,22 @@
int ib_attach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid)
{
- return qp->device->attach_mcast ?
- qp->device->attach_mcast(qp, gid, lid) :
- -ENOSYS;
+ if (!qp->device->attach_mcast)
+ return -ENOSYS;
+ if (gid->raw[0] != 0xff || qp->qp_type != IB_QPT_UD)
+ return -EINVAL;
+
+ return qp->device->attach_mcast(qp, gid, lid);
}
EXPORT_SYMBOL(ib_attach_mcast);
int ib_detach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid)
{
- return qp->device->detach_mcast ?
- qp->device->detach_mcast(qp, gid, lid) :
- -ENOSYS;
+ if (!qp->device->detach_mcast)
+ return -ENOSYS;
+ if (gid->raw[0] != 0xff || qp->qp_type != IB_QPT_UD)
+ return -EINVAL;
+
+ return qp->device->detach_mcast(qp, gid, lid);
}
EXPORT_SYMBOL(ib_detach_mcast);
diff --git a/drivers/infiniband/hw/mthca/Makefile b/drivers/infiniband/hw/mthca/Makefile
index c44f7ba..47ec5a7 100644
--- a/drivers/infiniband/hw/mthca/Makefile
+++ b/drivers/infiniband/hw/mthca/Makefile
@@ -7,4 +7,5 @@
ib_mthca-y := mthca_main.o mthca_cmd.o mthca_profile.o mthca_reset.o \
mthca_allocator.o mthca_eq.o mthca_pd.o mthca_cq.o \
mthca_mr.o mthca_qp.o mthca_av.o mthca_mcg.o mthca_mad.o \
- mthca_provider.o mthca_memfree.o mthca_uar.o mthca_srq.o
+ mthca_provider.o mthca_memfree.o mthca_uar.o mthca_srq.o \
+ mthca_catas.o
diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c
index 889e850..22fdc44 100644
--- a/drivers/infiniband/hw/mthca/mthca_av.c
+++ b/drivers/infiniband/hw/mthca/mthca_av.c
@@ -34,6 +34,8 @@
*/
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_cache.h>
diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c
new file mode 100644
index 0000000..7ac52af
--- /dev/null
+++ b/drivers/infiniband/hw/mthca/mthca_catas.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include "mthca_dev.h"
+
+enum {
+ MTHCA_CATAS_POLL_INTERVAL = 5 * HZ,
+
+ MTHCA_CATAS_TYPE_INTERNAL = 0,
+ MTHCA_CATAS_TYPE_UPLINK = 3,
+ MTHCA_CATAS_TYPE_DDR = 4,
+ MTHCA_CATAS_TYPE_PARITY = 5,
+};
+
+static DEFINE_SPINLOCK(catas_lock);
+
+static void handle_catas(struct mthca_dev *dev)
+{
+ struct ib_event event;
+ const char *type;
+ int i;
+
+ event.device = &dev->ib_dev;
+ event.event = IB_EVENT_DEVICE_FATAL;
+ event.element.port_num = 0;
+
+ ib_dispatch_event(&event);
+
+ switch (swab32(readl(dev->catas_err.map)) >> 24) {
+ case MTHCA_CATAS_TYPE_INTERNAL:
+ type = "internal error";
+ break;
+ case MTHCA_CATAS_TYPE_UPLINK:
+ type = "uplink bus error";
+ break;
+ case MTHCA_CATAS_TYPE_DDR:
+ type = "DDR data error";
+ break;
+ case MTHCA_CATAS_TYPE_PARITY:
+ type = "internal parity error";
+ break;
+ default:
+ type = "unknown error";
+ break;
+ }
+
+ mthca_err(dev, "Catastrophic error detected: %s\n", type);
+ for (i = 0; i < dev->catas_err.size; ++i)
+ mthca_err(dev, " buf[%02x]: %08x\n",
+ i, swab32(readl(dev->catas_err.map + i)));
+}
+
+static void poll_catas(unsigned long dev_ptr)
+{
+ struct mthca_dev *dev = (struct mthca_dev *) dev_ptr;
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i < dev->catas_err.size; ++i)
+ if (readl(dev->catas_err.map + i)) {
+ handle_catas(dev);
+ return;
+ }
+
+ spin_lock_irqsave(&catas_lock, flags);
+ if (dev->catas_err.stop)
+ mod_timer(&dev->catas_err.timer,
+ jiffies + MTHCA_CATAS_POLL_INTERVAL);
+ spin_unlock_irqrestore(&catas_lock, flags);
+
+ return;
+}
+
+void mthca_start_catas_poll(struct mthca_dev *dev)
+{
+ unsigned long addr;
+
+ init_timer(&dev->catas_err.timer);
+ dev->catas_err.stop = 0;
+ dev->catas_err.map = NULL;
+
+ addr = pci_resource_start(dev->pdev, 0) +
+ ((pci_resource_len(dev->pdev, 0) - 1) &
+ dev->catas_err.addr);
+
+ if (!request_mem_region(addr, dev->catas_err.size * 4,
+ DRV_NAME)) {
+ mthca_warn(dev, "couldn't request catastrophic error region "
+ "at 0x%lx/0x%x\n", addr, dev->catas_err.size * 4);
+ return;
+ }
+
+ dev->catas_err.map = ioremap(addr, dev->catas_err.size * 4);
+ if (!dev->catas_err.map) {
+ mthca_warn(dev, "couldn't map catastrophic error region "
+ "at 0x%lx/0x%x\n", addr, dev->catas_err.size * 4);
+ release_mem_region(addr, dev->catas_err.size * 4);
+ return;
+ }
+
+ dev->catas_err.timer.data = (unsigned long) dev;
+ dev->catas_err.timer.function = poll_catas;
+ dev->catas_err.timer.expires = jiffies + MTHCA_CATAS_POLL_INTERVAL;
+ add_timer(&dev->catas_err.timer);
+}
+
+void mthca_stop_catas_poll(struct mthca_dev *dev)
+{
+ spin_lock_irq(&catas_lock);
+ dev->catas_err.stop = 1;
+ spin_unlock_irq(&catas_lock);
+
+ del_timer_sync(&dev->catas_err.timer);
+
+ if (dev->catas_err.map) {
+ iounmap(dev->catas_err.map);
+ release_mem_region(pci_resource_start(dev->pdev, 0) +
+ ((pci_resource_len(dev->pdev, 0) - 1) &
+ dev->catas_err.addr),
+ dev->catas_err.size * 4);
+ }
+}
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index f6a8ac0..49f211d 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -1,6 +1,7 @@
/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -524,7 +525,7 @@
}
struct mthca_mailbox *mthca_alloc_mailbox(struct mthca_dev *dev,
- unsigned int gfp_mask)
+ gfp_t gfp_mask)
{
struct mthca_mailbox *mailbox;
@@ -706,9 +707,13 @@
MTHCA_GET(lg, outbox, QUERY_FW_MAX_CMD_OFFSET);
dev->cmd.max_cmds = 1 << lg;
+ MTHCA_GET(dev->catas_err.addr, outbox, QUERY_FW_ERR_START_OFFSET);
+ MTHCA_GET(dev->catas_err.size, outbox, QUERY_FW_ERR_SIZE_OFFSET);
mthca_dbg(dev, "FW version %012llx, max commands %d\n",
(unsigned long long) dev->fw_ver, dev->cmd.max_cmds);
+ mthca_dbg(dev, "Catastrophic error buffer at 0x%llx, size 0x%x\n",
+ (unsigned long long) dev->catas_err.addr, dev->catas_err.size);
if (mthca_is_memfree(dev)) {
MTHCA_GET(dev->fw.arbel.fw_pages, outbox, QUERY_FW_SIZE_OFFSET);
@@ -933,9 +938,9 @@
goto out;
MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_SRQ_SZ_OFFSET);
- dev_lim->max_srq_sz = 1 << field;
+ dev_lim->max_srq_sz = (1 << field) - 1;
MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_QP_SZ_OFFSET);
- dev_lim->max_qp_sz = 1 << field;
+ dev_lim->max_qp_sz = (1 << field) - 1;
MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_QP_OFFSET);
dev_lim->reserved_qps = 1 << (field & 0xf);
MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_QP_OFFSET);
@@ -1045,6 +1050,8 @@
dev_lim->max_pds, dev_lim->reserved_pds, dev_lim->reserved_uars);
mthca_dbg(dev, "Max QP/MCG: %d, reserved MGMs: %d\n",
dev_lim->max_pds, dev_lim->reserved_mgms);
+ mthca_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n",
+ dev_lim->max_cq_sz, dev_lim->max_qp_sz, dev_lim->max_srq_sz);
mthca_dbg(dev, "Flags: %08x\n", dev_lim->flags);
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h
index 65f976a..18175be 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.h
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.h
@@ -248,7 +248,7 @@
u8 status, u64 out_param);
struct mthca_mailbox *mthca_alloc_mailbox(struct mthca_dev *dev,
- unsigned int gfp_mask);
+ gfp_t gfp_mask);
void mthca_free_mailbox(struct mthca_dev *dev, struct mthca_mailbox *mailbox);
int mthca_SYS_EN(struct mthca_dev *dev, u8 *status);
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 7bff5a8..7e68bd4 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -83,6 +83,8 @@
/* Arbel FW gives us these, but we need them for Tavor */
MTHCA_MPT_ENTRY_SIZE = 0x40,
MTHCA_MTT_SEG_SIZE = 0x40,
+
+ MTHCA_QP_PER_MGM = 4 * (MTHCA_MGM_ENTRY_SIZE / 16 - 2)
};
enum {
@@ -128,12 +130,16 @@
int num_uars;
int max_sg;
int num_qps;
+ int max_wqes;
+ int max_qp_init_rdma;
int reserved_qps;
int num_srqs;
+ int max_srq_wqes;
int reserved_srqs;
int num_eecs;
int reserved_eecs;
int num_cqs;
+ int max_cqes;
int reserved_cqs;
int num_eqs;
int reserved_eqs;
@@ -148,6 +154,7 @@
int reserved_mcgs;
int num_pds;
int reserved_pds;
+ u32 flags;
u8 port_width_cap;
};
@@ -251,6 +258,14 @@
struct mthca_icm_table *table;
};
+struct mthca_catas_err {
+ u64 addr;
+ u32 __iomem *map;
+ unsigned long stop;
+ u32 size;
+ struct timer_list timer;
+};
+
struct mthca_dev {
struct ib_device ib_dev;
struct pci_dev *pdev;
@@ -311,6 +326,8 @@
struct mthca_av_table av_table;
struct mthca_mcg_table mcg_table;
+ struct mthca_catas_err catas_err;
+
struct mthca_uar driver_uar;
struct mthca_db_table *db_tab;
struct mthca_pd driver_pd;
@@ -398,6 +415,9 @@
int mthca_register_device(struct mthca_dev *dev);
void mthca_unregister_device(struct mthca_dev *dev);
+void mthca_start_catas_poll(struct mthca_dev *dev);
+void mthca_stop_catas_poll(struct mthca_dev *dev);
+
int mthca_uar_alloc(struct mthca_dev *dev, struct mthca_uar *uar);
void mthca_uar_free(struct mthca_dev *dev, struct mthca_uar *uar);
@@ -447,6 +467,8 @@
int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd,
struct ib_srq_attr *attr, struct mthca_srq *srq);
void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq);
+int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
+ enum ib_srq_attr_mask attr_mask);
void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
enum ib_event_type event_type);
void mthca_free_srq_wqe(struct mthca_srq *srq, u32 wqe_addr);
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index 8dfafda..e5a047a 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -83,7 +83,8 @@
MTHCA_EVENT_TYPE_PATH_MIG = 0x01,
MTHCA_EVENT_TYPE_COMM_EST = 0x02,
MTHCA_EVENT_TYPE_SQ_DRAINED = 0x03,
- MTHCA_EVENT_TYPE_SRQ_LAST_WQE = 0x13,
+ MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE = 0x13,
+ MTHCA_EVENT_TYPE_SRQ_LIMIT = 0x14,
MTHCA_EVENT_TYPE_CQ_ERROR = 0x04,
MTHCA_EVENT_TYPE_WQ_CATAS_ERROR = 0x05,
MTHCA_EVENT_TYPE_EEC_CATAS_ERROR = 0x06,
@@ -110,8 +111,9 @@
(1ULL << MTHCA_EVENT_TYPE_LOCAL_CATAS_ERROR) | \
(1ULL << MTHCA_EVENT_TYPE_PORT_CHANGE) | \
(1ULL << MTHCA_EVENT_TYPE_ECC_DETECT))
-#define MTHCA_SRQ_EVENT_MASK (1ULL << MTHCA_EVENT_TYPE_SRQ_CATAS_ERROR) | \
- (1ULL << MTHCA_EVENT_TYPE_SRQ_LAST_WQE)
+#define MTHCA_SRQ_EVENT_MASK ((1ULL << MTHCA_EVENT_TYPE_SRQ_CATAS_ERROR) | \
+ (1ULL << MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE) | \
+ (1ULL << MTHCA_EVENT_TYPE_SRQ_LIMIT))
#define MTHCA_CMD_EVENT_MASK (1ULL << MTHCA_EVENT_TYPE_CMD)
#define MTHCA_EQ_DB_INC_CI (1 << 24)
@@ -142,6 +144,9 @@
__be32 qpn;
} __attribute__((packed)) qp;
struct {
+ __be32 srqn;
+ } __attribute__((packed)) srq;
+ struct {
__be32 cqn;
u32 reserved1;
u8 reserved2[3];
@@ -305,6 +310,16 @@
IB_EVENT_SQ_DRAINED);
break;
+ case MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE:
+ mthca_qp_event(dev, be32_to_cpu(eqe->event.qp.qpn) & 0xffffff,
+ IB_EVENT_QP_LAST_WQE_REACHED);
+ break;
+
+ case MTHCA_EVENT_TYPE_SRQ_LIMIT:
+ mthca_srq_event(dev, be32_to_cpu(eqe->event.srq.srqn) & 0xffffff,
+ IB_EVENT_SRQ_LIMIT_REACHED);
+ break;
+
case MTHCA_EVENT_TYPE_WQ_CATAS_ERROR:
mthca_qp_event(dev, be32_to_cpu(eqe->event.qp.qpn) & 0xffffff,
IB_EVENT_QP_FATAL);
diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c
index 9804174..1229c60 100644
--- a/drivers/infiniband/hw/mthca/mthca_mad.c
+++ b/drivers/infiniband/hw/mthca/mthca_mad.c
@@ -34,6 +34,9 @@
* $Id: mthca_mad.c 1349 2004-12-16 21:09:43Z roland $
*/
+#include <linux/string.h>
+#include <linux/slab.h>
+
#include <rdma/ib_verbs.h>
#include <rdma/ib_mad.h>
#include <rdma/ib_smi.h>
@@ -46,11 +49,6 @@
MTHCA_VENDOR_CLASS2 = 0xa
};
-struct mthca_trap_mad {
- struct ib_mad *mad;
- DECLARE_PCI_UNMAP_ADDR(mapping)
-};
-
static void update_sm_ah(struct mthca_dev *dev,
u8 port_num, u16 lid, u8 sl)
{
@@ -116,49 +114,14 @@
struct ib_mad *mad)
{
int qpn = mad->mad_hdr.mgmt_class != IB_MGMT_CLASS_SUBN_LID_ROUTED;
- struct mthca_trap_mad *tmad;
- struct ib_sge gather_list;
- struct ib_send_wr *bad_wr, wr = {
- .opcode = IB_WR_SEND,
- .sg_list = &gather_list,
- .num_sge = 1,
- .send_flags = IB_SEND_SIGNALED,
- .wr = {
- .ud = {
- .remote_qpn = qpn,
- .remote_qkey = qpn ? IB_QP1_QKEY : 0,
- .timeout_ms = 0
- }
- }
- };
+ struct ib_mad_send_buf *send_buf;
struct ib_mad_agent *agent = dev->send_agent[port_num - 1][qpn];
int ret;
unsigned long flags;
if (agent) {
- tmad = kmalloc(sizeof *tmad, GFP_KERNEL);
- if (!tmad)
- return;
-
- tmad->mad = kmalloc(sizeof *tmad->mad, GFP_KERNEL);
- if (!tmad->mad) {
- kfree(tmad);
- return;
- }
-
- memcpy(tmad->mad, mad, sizeof *mad);
-
- wr.wr.ud.mad_hdr = &tmad->mad->mad_hdr;
- wr.wr_id = (unsigned long) tmad;
-
- gather_list.addr = dma_map_single(agent->device->dma_device,
- tmad->mad,
- sizeof *tmad->mad,
- DMA_TO_DEVICE);
- gather_list.length = sizeof *tmad->mad;
- gather_list.lkey = to_mpd(agent->qp->pd)->ntmr.ibmr.lkey;
- pci_unmap_addr_set(tmad, mapping, gather_list.addr);
-
+ send_buf = ib_create_send_mad(agent, qpn, 0, 0, IB_MGMT_MAD_HDR,
+ IB_MGMT_MAD_DATA, GFP_ATOMIC);
/*
* We rely here on the fact that MLX QPs don't use the
* address handle after the send is posted (this is
@@ -166,21 +129,15 @@
* it's OK for our devices).
*/
spin_lock_irqsave(&dev->sm_lock, flags);
- wr.wr.ud.ah = dev->sm_ah[port_num - 1];
- if (wr.wr.ud.ah)
- ret = ib_post_send_mad(agent, &wr, &bad_wr);
+ memcpy(send_buf->mad, mad, sizeof *mad);
+ if ((send_buf->ah = dev->sm_ah[port_num - 1]))
+ ret = ib_post_send_mad(send_buf, NULL);
else
ret = -EINVAL;
spin_unlock_irqrestore(&dev->sm_lock, flags);
- if (ret) {
- dma_unmap_single(agent->device->dma_device,
- pci_unmap_addr(tmad, mapping),
- sizeof *tmad->mad,
- DMA_TO_DEVICE);
- kfree(tmad->mad);
- kfree(tmad);
- }
+ if (ret)
+ ib_free_send_mad(send_buf);
}
}
@@ -267,15 +224,7 @@
static void send_handler(struct ib_mad_agent *agent,
struct ib_mad_send_wc *mad_send_wc)
{
- struct mthca_trap_mad *tmad =
- (void *) (unsigned long) mad_send_wc->wr_id;
-
- dma_unmap_single(agent->device->dma_device,
- pci_unmap_addr(tmad, mapping),
- sizeof *tmad->mad,
- DMA_TO_DEVICE);
- kfree(tmad->mad);
- kfree(tmad);
+ ib_free_send_mad(mad_send_wc->send_buf);
}
int mthca_create_agents(struct mthca_dev *dev)
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 23a3f56..883d1e5 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -162,9 +162,18 @@
mdev->limits.pkey_table_len = dev_lim->max_pkeys;
mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay;
mdev->limits.max_sg = dev_lim->max_sg;
+ mdev->limits.max_wqes = dev_lim->max_qp_sz;
+ mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp;
mdev->limits.reserved_qps = dev_lim->reserved_qps;
+ mdev->limits.max_srq_wqes = dev_lim->max_srq_sz;
mdev->limits.reserved_srqs = dev_lim->reserved_srqs;
mdev->limits.reserved_eecs = dev_lim->reserved_eecs;
+ /*
+ * Subtract 1 from the limit because we need to allocate a
+ * spare CQE so the HCA HW can tell the difference between an
+ * empty CQ and a full CQ.
+ */
+ mdev->limits.max_cqes = dev_lim->max_cq_sz - 1;
mdev->limits.reserved_cqs = dev_lim->reserved_cqs;
mdev->limits.reserved_eqs = dev_lim->reserved_eqs;
mdev->limits.reserved_mtts = dev_lim->reserved_mtts;
@@ -172,6 +181,7 @@
mdev->limits.reserved_uars = dev_lim->reserved_uars;
mdev->limits.reserved_pds = dev_lim->reserved_pds;
mdev->limits.port_width_cap = dev_lim->max_port_width;
+ mdev->limits.flags = dev_lim->flags;
/* IB_DEVICE_RESIZE_MAX_WR not supported by driver.
May be doable since hardware supports it for SRQ.
@@ -1186,6 +1196,7 @@
static struct pci_driver mthca_driver = {
.name = DRV_NAME,
+ .owner = THIS_MODULE,
.id_table = mthca_pci_table,
.probe = mthca_init_one,
.remove = __devexit_p(mthca_remove_one)
diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c
index a270760..2fc449d 100644
--- a/drivers/infiniband/hw/mthca/mthca_mcg.c
+++ b/drivers/infiniband/hw/mthca/mthca_mcg.c
@@ -33,14 +33,12 @@
*/
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "mthca_dev.h"
#include "mthca_cmd.h"
-enum {
- MTHCA_QP_PER_MGM = 4 * (MTHCA_MGM_ENTRY_SIZE / 16 - 2)
-};
-
struct mthca_mgm {
__be32 next_gid_index;
u32 reserved[3];
@@ -189,7 +187,12 @@
}
for (i = 0; i < MTHCA_QP_PER_MGM; ++i)
- if (!(mgm->qp[i] & cpu_to_be32(1 << 31))) {
+ if (mgm->qp[i] == cpu_to_be32(ibqp->qp_num | (1 << 31))) {
+ mthca_dbg(dev, "QP %06x already a member of MGM\n",
+ ibqp->qp_num);
+ err = 0;
+ goto out;
+ } else if (!(mgm->qp[i] & cpu_to_be32(1 << 31))) {
mgm->qp[i] = cpu_to_be32(ibqp->qp_num | (1 << 31));
break;
}
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index 7bd7a4b..d72fe95 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -82,7 +82,7 @@
}
struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages,
- unsigned int gfp_mask)
+ gfp_t gfp_mask)
{
struct mthca_icm *icm;
struct mthca_icm_chunk *chunk = NULL;
@@ -487,7 +487,8 @@
}
}
-int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, __be32 **db)
+int mthca_alloc_db(struct mthca_dev *dev, enum mthca_db_type type,
+ u32 qn, __be32 **db)
{
int group;
int start, end, dir;
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h
index bafa515..4fdca26 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.h
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.h
@@ -77,7 +77,7 @@
struct mthca_dev;
struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages,
- unsigned int gfp_mask);
+ gfp_t gfp_mask);
void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm);
struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev,
@@ -173,7 +173,8 @@
int mthca_init_db_tab(struct mthca_dev *dev);
void mthca_cleanup_db_tab(struct mthca_dev *dev);
-int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, __be32 **db);
+int mthca_alloc_db(struct mthca_dev *dev, enum mthca_db_type type,
+ u32 qn, __be32 **db);
void mthca_free_db(struct mthca_dev *dev, int type, int db_index);
#endif /* MTHCA_MEMFREE_H */
diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c
index 0576056..bd13386 100644
--- a/drivers/infiniband/hw/mthca/mthca_profile.c
+++ b/drivers/infiniband/hw/mthca/mthca_profile.c
@@ -35,6 +35,8 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "mthca_profile.h"
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 3f5319a..1b9477e 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -37,6 +37,7 @@
*/
#include <rdma/ib_smi.h>
+#include <rdma/ib_user_verbs.h>
#include <linux/mm.h>
#include "mthca_dev.h"
@@ -90,15 +91,26 @@
props->max_mr_size = ~0ull;
props->max_qp = mdev->limits.num_qps - mdev->limits.reserved_qps;
- props->max_qp_wr = 0xffff;
+ props->max_qp_wr = mdev->limits.max_wqes;
props->max_sge = mdev->limits.max_sg;
props->max_cq = mdev->limits.num_cqs - mdev->limits.reserved_cqs;
- props->max_cqe = 0xffff;
+ props->max_cqe = mdev->limits.max_cqes;
props->max_mr = mdev->limits.num_mpts - mdev->limits.reserved_mrws;
props->max_pd = mdev->limits.num_pds - mdev->limits.reserved_pds;
props->max_qp_rd_atom = 1 << mdev->qp_table.rdb_shift;
- props->max_qp_init_rd_atom = 1 << mdev->qp_table.rdb_shift;
+ props->max_qp_init_rd_atom = mdev->limits.max_qp_init_rdma;
+ props->max_res_rd_atom = props->max_qp_rd_atom * props->max_qp;
+ props->max_srq = mdev->limits.num_srqs - mdev->limits.reserved_srqs;
+ props->max_srq_wr = mdev->limits.max_srq_wqes;
+ props->max_srq_sge = mdev->limits.max_sg;
props->local_ca_ack_delay = mdev->limits.local_ca_ack_delay;
+ props->atomic_cap = mdev->limits.flags & DEV_LIM_FLAG_ATOMIC ?
+ IB_ATOMIC_HCA : IB_ATOMIC_NONE;
+ props->max_pkeys = mdev->limits.pkey_table_len;
+ props->max_mcast_grp = mdev->limits.num_mgms + mdev->limits.num_amgms;
+ props->max_mcast_qp_attach = MTHCA_QP_PER_MGM;
+ props->max_total_mcast_qp_attach = props->max_mcast_qp_attach *
+ props->max_mcast_grp;
err = 0;
out:
@@ -150,9 +162,13 @@
props->gid_tbl_len = to_mdev(ibdev)->limits.gid_table_len;
props->max_msg_sz = 0x80000000;
props->pkey_tbl_len = to_mdev(ibdev)->limits.pkey_table_len;
+ props->bad_pkey_cntr = be16_to_cpup((__be16 *) (out_mad->data + 46));
props->qkey_viol_cntr = be16_to_cpup((__be16 *) (out_mad->data + 48));
props->active_width = out_mad->data[31] & 0xf;
props->active_speed = out_mad->data[35] >> 4;
+ props->max_mtu = out_mad->data[41] & 0xf;
+ props->active_mtu = out_mad->data[36] >> 4;
+ props->subnet_timeout = out_mad->data[51] & 0x1f;
out:
kfree(in_mad);
@@ -634,6 +650,9 @@
int nent;
int err;
+ if (entries < 1 || entries > to_mdev(ibdev)->limits.max_cqes)
+ return ERR_PTR(-EINVAL);
+
if (context) {
if (ib_copy_from_udata(&ucmd, udata, sizeof ucmd))
return ERR_PTR(-EFAULT);
@@ -1058,6 +1077,26 @@
strlcpy(dev->ib_dev.name, "mthca%d", IB_DEVICE_NAME_MAX);
dev->ib_dev.owner = THIS_MODULE;
+ dev->ib_dev.uverbs_abi_ver = MTHCA_UVERBS_ABI_VERSION;
+ dev->ib_dev.uverbs_cmd_mask =
+ (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_PORT) |
+ (1ull << IB_USER_VERBS_CMD_ALLOC_PD) |
+ (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) |
+ (1ull << IB_USER_VERBS_CMD_REG_MR) |
+ (1ull << IB_USER_VERBS_CMD_DEREG_MR) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
+ (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_QP) |
+ (1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
+ (1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
+ (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) |
+ (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ);
dev->ib_dev.node_type = IB_NODE_CA;
dev->ib_dev.phys_port_cnt = dev->limits.num_ports;
dev->ib_dev.dma_device = &dev->pdev->dev;
@@ -1077,6 +1116,7 @@
if (dev->mthca_flags & MTHCA_FLAG_SRQ) {
dev->ib_dev.create_srq = mthca_create_srq;
+ dev->ib_dev.modify_srq = mthca_modify_srq;
dev->ib_dev.destroy_srq = mthca_destroy_srq;
if (mthca_is_memfree(dev))
@@ -1135,10 +1175,13 @@
}
}
+ mthca_start_catas_poll(dev);
+
return 0;
}
void mthca_unregister_device(struct mthca_dev *dev)
{
+ mthca_stop_catas_poll(dev);
ib_unregister_device(&dev->ib_dev);
}
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 5fa0066..7c9afde 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -36,6 +36,8 @@
*/
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_cache.h>
@@ -338,8 +340,7 @@
[UC] = (IB_QP_AV |
IB_QP_PATH_MTU |
IB_QP_DEST_QPN |
- IB_QP_RQ_PSN |
- IB_QP_MAX_DEST_RD_ATOMIC),
+ IB_QP_RQ_PSN),
[RC] = (IB_QP_AV |
IB_QP_PATH_MTU |
IB_QP_DEST_QPN |
@@ -368,8 +369,7 @@
.trans = MTHCA_TRANS_RTR2RTS,
.req_param = {
[UD] = IB_QP_SQ_PSN,
- [UC] = (IB_QP_SQ_PSN |
- IB_QP_MAX_QP_RD_ATOMIC),
+ [UC] = IB_QP_SQ_PSN,
[RC] = (IB_QP_TIMEOUT |
IB_QP_RETRY_CNT |
IB_QP_RNR_RETRY |
@@ -446,8 +446,6 @@
[UD] = (IB_QP_PKEY_INDEX |
IB_QP_QKEY),
[UC] = (IB_QP_AV |
- IB_QP_MAX_QP_RD_ATOMIC |
- IB_QP_MAX_DEST_RD_ATOMIC |
IB_QP_CUR_STATE |
IB_QP_ALT_PATH |
IB_QP_ACCESS_FLAGS |
@@ -478,7 +476,7 @@
.opt_param = {
[UD] = (IB_QP_CUR_STATE |
IB_QP_QKEY),
- [UC] = (IB_QP_CUR_STATE),
+ [UC] = IB_QP_CUR_STATE,
[RC] = (IB_QP_CUR_STATE |
IB_QP_MIN_RNR_TIMER),
[MLX] = (IB_QP_CUR_STATE |
@@ -1112,8 +1110,10 @@
struct mthca_qp *qp)
{
/* Sanity check QP size before proceeding */
- if (cap->max_send_wr > 65536 || cap->max_recv_wr > 65536 ||
- cap->max_send_sge > 64 || cap->max_recv_sge > 64)
+ if (cap->max_send_wr > dev->limits.max_wqes ||
+ cap->max_recv_wr > dev->limits.max_wqes ||
+ cap->max_send_sge > dev->limits.max_sg ||
+ cap->max_recv_sge > dev->limits.max_sg)
return -EINVAL;
if (mthca_is_memfree(dev)) {
diff --git a/drivers/infiniband/hw/mthca/mthca_reset.c b/drivers/infiniband/hw/mthca/mthca_reset.c
index 4f99539..df5e494 100644
--- a/drivers/infiniband/hw/mthca/mthca_reset.c
+++ b/drivers/infiniband/hw/mthca/mthca_reset.c
@@ -37,6 +37,7 @@
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "mthca_dev.h"
#include "mthca_cmd.h"
diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c
index 18998d4..64f70aa 100644
--- a/drivers/infiniband/hw/mthca/mthca_srq.c
+++ b/drivers/infiniband/hw/mthca/mthca_srq.c
@@ -186,7 +186,8 @@
int err;
/* Sanity check SRQ size before proceeding */
- if (attr->max_wr > 16 << 20 || attr->max_sge > 64)
+ if (attr->max_wr > dev->limits.max_srq_wqes ||
+ attr->max_sge > dev->limits.max_sg)
return -EINVAL;
srq->max = attr->max_wr;
@@ -332,6 +333,29 @@
mthca_free_mailbox(dev, mailbox);
}
+int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
+ enum ib_srq_attr_mask attr_mask)
+{
+ struct mthca_dev *dev = to_mdev(ibsrq->device);
+ struct mthca_srq *srq = to_msrq(ibsrq);
+ int ret;
+ u8 status;
+
+ /* We don't support resizing SRQs (yet?) */
+ if (attr_mask & IB_SRQ_MAX_WR)
+ return -EINVAL;
+
+ if (attr_mask & IB_SRQ_LIMIT) {
+ ret = mthca_ARM_SRQ(dev, srq->srqn, attr->srq_limit, &status);
+ if (ret)
+ return ret;
+ if (status)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
enum ib_event_type event_type)
{
@@ -354,7 +378,7 @@
event.device = &dev->ib_dev;
event.event = event_type;
- event.element.srq = &srq->ibsrq;
+ event.element.srq = &srq->ibsrq;
srq->ibsrq.event_handler(&event, srq->ibsrq.srq_context);
out:
@@ -415,6 +439,14 @@
wqe = get_wqe(srq, ind);
next_ind = *wqe_to_link(wqe);
+
+ if (next_ind < 0) {
+ mthca_err(dev, "SRQ %06x full\n", srq->srqn);
+ err = -ENOMEM;
+ *bad_wr = wr;
+ break;
+ }
+
prev_wqe = srq->last;
srq->last = wqe;
@@ -506,6 +538,13 @@
wqe = get_wqe(srq, ind);
next_ind = *wqe_to_link(wqe);
+ if (next_ind < 0) {
+ mthca_err(dev, "SRQ %06x full\n", srq->srqn);
+ err = -ENOMEM;
+ *bad_wr = wr;
+ break;
+ }
+
((struct mthca_next_seg *) wqe)->nda_op =
cpu_to_be32((next_ind << srq->wqe_shift) | 1);
((struct mthca_next_seg *) wqe)->ee_nds = 0;
diff --git a/drivers/infiniband/hw/mthca/mthca_uar.c b/drivers/infiniband/hw/mthca/mthca_uar.c
index 1c8791d..8e92198 100644
--- a/drivers/infiniband/hw/mthca/mthca_uar.c
+++ b/drivers/infiniband/hw/mthca/mthca_uar.c
@@ -32,6 +32,8 @@
* $Id$
*/
+#include <asm/page.h> /* PAGE_SHIFT */
+
#include "mthca_dev.h"
#include "mthca_memfree.h"
diff --git a/drivers/infiniband/hw/mthca/mthca_user.h b/drivers/infiniband/hw/mthca/mthca_user.h
index 41613ec..bb015c6 100644
--- a/drivers/infiniband/hw/mthca/mthca_user.h
+++ b/drivers/infiniband/hw/mthca/mthca_user.h
@@ -38,6 +38,12 @@
#include <linux/types.h>
/*
+ * Increment this value if any changes that break userspace ABI
+ * compatibility are made.
+ */
+#define MTHCA_UVERBS_ABI_VERSION 1
+
+/*
* Make sure that all structs defined in this file remain laid out so
* that they pack the same way on 32-bit and 64-bit architectures (to
* avoid incompatibility between 32-bit userspace and 64-bit kernels).
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 4ea1c1c..c994a91 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -100,7 +100,12 @@
struct ipoib_mcast;
-struct ipoib_buf {
+struct ipoib_rx_buf {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+};
+
+struct ipoib_tx_buf {
struct sk_buff *skb;
DECLARE_PCI_UNMAP_ADDR(mapping)
};
@@ -150,14 +155,14 @@
unsigned int admin_mtu;
unsigned int mcast_mtu;
- struct ipoib_buf *rx_ring;
+ struct ipoib_rx_buf *rx_ring;
- spinlock_t tx_lock;
- struct ipoib_buf *tx_ring;
- unsigned tx_head;
- unsigned tx_tail;
- struct ib_sge tx_sge;
- struct ib_send_wr tx_wr;
+ spinlock_t tx_lock;
+ struct ipoib_tx_buf *tx_ring;
+ unsigned tx_head;
+ unsigned tx_tail;
+ struct ib_sge tx_sge;
+ struct ib_send_wr tx_wr;
struct ib_wc ibwc[IPOIB_NUM_WC];
@@ -277,7 +282,7 @@
int ipoib_mcast_detach(struct net_device *dev, u16 mlid,
union ib_gid *mgid);
-int ipoib_qp_create(struct net_device *dev);
+int ipoib_init_qp(struct net_device *dev);
int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca);
void ipoib_transport_dev_cleanup(struct net_device *dev);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index f744009..192fef8 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -95,65 +95,77 @@
}
}
-static inline int ipoib_ib_receive(struct ipoib_dev_priv *priv,
- unsigned int wr_id,
- dma_addr_t addr)
-{
- struct ib_sge list = {
- .addr = addr,
- .length = IPOIB_BUF_SIZE,
- .lkey = priv->mr->lkey,
- };
- struct ib_recv_wr param = {
- .wr_id = wr_id | IPOIB_OP_RECV,
- .sg_list = &list,
- .num_sge = 1,
- };
- struct ib_recv_wr *bad_wr;
-
- return ib_post_recv(priv->qp, ¶m, &bad_wr);
-}
-
static int ipoib_ib_post_receive(struct net_device *dev, int id)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
- struct sk_buff *skb;
- dma_addr_t addr;
+ struct ib_sge list;
+ struct ib_recv_wr param;
+ struct ib_recv_wr *bad_wr;
int ret;
- skb = dev_alloc_skb(IPOIB_BUF_SIZE + 4);
- if (!skb) {
- ipoib_warn(priv, "failed to allocate receive buffer\n");
+ list.addr = priv->rx_ring[id].mapping;
+ list.length = IPOIB_BUF_SIZE;
+ list.lkey = priv->mr->lkey;
- priv->rx_ring[id].skb = NULL;
- return -ENOMEM;
- }
- skb_reserve(skb, 4); /* 16 byte align IP header */
- priv->rx_ring[id].skb = skb;
- addr = dma_map_single(priv->ca->dma_device,
- skb->data, IPOIB_BUF_SIZE,
- DMA_FROM_DEVICE);
- pci_unmap_addr_set(&priv->rx_ring[id], mapping, addr);
+ param.next = NULL;
+ param.wr_id = id | IPOIB_OP_RECV;
+ param.sg_list = &list;
+ param.num_sge = 1;
- ret = ipoib_ib_receive(priv, id, addr);
- if (ret) {
- ipoib_warn(priv, "ipoib_ib_receive failed for buf %d (%d)\n",
- id, ret);
- dma_unmap_single(priv->ca->dma_device, addr,
+ ret = ib_post_recv(priv->qp, ¶m, &bad_wr);
+ if (unlikely(ret)) {
+ ipoib_warn(priv, "receive failed for buf %d (%d)\n", id, ret);
+ dma_unmap_single(priv->ca->dma_device,
+ priv->rx_ring[id].mapping,
IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
- dev_kfree_skb_any(skb);
+ dev_kfree_skb_any(priv->rx_ring[id].skb);
priv->rx_ring[id].skb = NULL;
}
return ret;
}
+static int ipoib_alloc_rx_skb(struct net_device *dev, int id)
+{
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb;
+ dma_addr_t addr;
+
+ skb = dev_alloc_skb(IPOIB_BUF_SIZE + 4);
+ if (!skb)
+ return -ENOMEM;
+
+ /*
+ * IB will leave a 40 byte gap for a GRH and IPoIB adds a 4 byte
+ * header. So we need 4 more bytes to get to 48 and align the
+ * IP header to a multiple of 16.
+ */
+ skb_reserve(skb, 4);
+
+ addr = dma_map_single(priv->ca->dma_device,
+ skb->data, IPOIB_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(addr))) {
+ dev_kfree_skb_any(skb);
+ return -EIO;
+ }
+
+ priv->rx_ring[id].skb = skb;
+ priv->rx_ring[id].mapping = addr;
+
+ return 0;
+}
+
static int ipoib_ib_post_receives(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
int i;
for (i = 0; i < IPOIB_RX_RING_SIZE; ++i) {
+ if (ipoib_alloc_rx_skb(dev, i)) {
+ ipoib_warn(priv, "failed to allocate receive buffer %d\n", i);
+ return -ENOMEM;
+ }
if (ipoib_ib_post_receive(dev, i)) {
ipoib_warn(priv, "ipoib_ib_post_receive failed for buf %d\n", i);
return -EIO;
@@ -176,28 +188,36 @@
wr_id &= ~IPOIB_OP_RECV;
if (wr_id < IPOIB_RX_RING_SIZE) {
- struct sk_buff *skb = priv->rx_ring[wr_id].skb;
+ struct sk_buff *skb = priv->rx_ring[wr_id].skb;
+ dma_addr_t addr = priv->rx_ring[wr_id].mapping;
- priv->rx_ring[wr_id].skb = NULL;
-
- dma_unmap_single(priv->ca->dma_device,
- pci_unmap_addr(&priv->rx_ring[wr_id],
- mapping),
- IPOIB_BUF_SIZE,
- DMA_FROM_DEVICE);
-
- if (wc->status != IB_WC_SUCCESS) {
+ if (unlikely(wc->status != IB_WC_SUCCESS)) {
if (wc->status != IB_WC_WR_FLUSH_ERR)
ipoib_warn(priv, "failed recv event "
"(status=%d, wrid=%d vend_err %x)\n",
wc->status, wr_id, wc->vendor_err);
+ dma_unmap_single(priv->ca->dma_device, addr,
+ IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
+ priv->rx_ring[wr_id].skb = NULL;
return;
}
+ /*
+ * If we can't allocate a new RX buffer, dump
+ * this packet and reuse the old buffer.
+ */
+ if (unlikely(ipoib_alloc_rx_skb(dev, wr_id))) {
+ ++priv->stats.rx_dropped;
+ goto repost;
+ }
+
ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n",
wc->byte_len, wc->slid);
+ dma_unmap_single(priv->ca->dma_device, addr,
+ IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
+
skb_put(skb, wc->byte_len);
skb_pull(skb, IB_GRH_BYTES);
@@ -220,8 +240,8 @@
dev_kfree_skb_any(skb);
}
- /* repost receive */
- if (ipoib_ib_post_receive(dev, wr_id))
+ repost:
+ if (unlikely(ipoib_ib_post_receive(dev, wr_id)))
ipoib_warn(priv, "ipoib_ib_post_receive failed "
"for buf %d\n", wr_id);
} else
@@ -229,7 +249,7 @@
wr_id);
} else {
- struct ipoib_buf *tx_req;
+ struct ipoib_tx_buf *tx_req;
unsigned long flags;
if (wr_id >= IPOIB_TX_RING_SIZE) {
@@ -302,7 +322,7 @@
struct ipoib_ah *address, u32 qpn)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
- struct ipoib_buf *tx_req;
+ struct ipoib_tx_buf *tx_req;
dma_addr_t addr;
if (skb->len > dev->mtu + INFINIBAND_ALEN) {
@@ -387,9 +407,9 @@
struct ipoib_dev_priv *priv = netdev_priv(dev);
int ret;
- ret = ipoib_qp_create(dev);
+ ret = ipoib_init_qp(dev);
if (ret) {
- ipoib_warn(priv, "ipoib_qp_create returned %d\n", ret);
+ ipoib_warn(priv, "ipoib_init_qp returned %d\n", ret);
return -1;
}
@@ -468,7 +488,7 @@
struct ib_qp_attr qp_attr;
int attr_mask;
unsigned long begin;
- struct ipoib_buf *tx_req;
+ struct ipoib_tx_buf *tx_req;
int i;
/* Kill the existing QP and allocate a new one */
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 6c5bf07..cd4f423 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -637,8 +637,11 @@
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
- ipoib_warn(priv, "transmit timeout: latency %ld\n",
- jiffies - dev->trans_start);
+ ipoib_warn(priv, "transmit timeout: latency %d msecs\n",
+ jiffies_to_msecs(jiffies - dev->trans_start));
+ ipoib_warn(priv, "queue stopped %d, tx_head %u, tx_tail %u\n",
+ netif_queue_stopped(dev),
+ priv->tx_head, priv->tx_tail);
/* XXX reset QP, etc. */
}
@@ -729,7 +732,7 @@
/* Allocate RX/TX "rings" to hold queued skbs */
- priv->rx_ring = kmalloc(IPOIB_RX_RING_SIZE * sizeof (struct ipoib_buf),
+ priv->rx_ring = kmalloc(IPOIB_RX_RING_SIZE * sizeof (struct ipoib_rx_buf),
GFP_KERNEL);
if (!priv->rx_ring) {
printk(KERN_WARNING "%s: failed to allocate RX ring (%d entries)\n",
@@ -737,9 +740,9 @@
goto out;
}
memset(priv->rx_ring, 0,
- IPOIB_RX_RING_SIZE * sizeof (struct ipoib_buf));
+ IPOIB_RX_RING_SIZE * sizeof (struct ipoib_rx_buf));
- priv->tx_ring = kmalloc(IPOIB_TX_RING_SIZE * sizeof (struct ipoib_buf),
+ priv->tx_ring = kmalloc(IPOIB_TX_RING_SIZE * sizeof (struct ipoib_tx_buf),
GFP_KERNEL);
if (!priv->tx_ring) {
printk(KERN_WARNING "%s: failed to allocate TX ring (%d entries)\n",
@@ -747,7 +750,7 @@
goto out_rx_ring_cleanup;
}
memset(priv->tx_ring, 0,
- IPOIB_TX_RING_SIZE * sizeof (struct ipoib_buf));
+ IPOIB_TX_RING_SIZE * sizeof (struct ipoib_tx_buf));
/* priv->tx_head & tx_tail are already 0 */
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
index 79f59d0..b5902a7 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
@@ -92,7 +92,7 @@
return ret;
}
-int ipoib_qp_create(struct net_device *dev)
+int ipoib_init_qp(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
int ret;
@@ -149,10 +149,11 @@
return 0;
out_fail:
- ib_destroy_qp(priv->qp);
- priv->qp = NULL;
+ qp_attr.qp_state = IB_QPS_RESET;
+ if (ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE))
+ ipoib_warn(priv, "Failed to modify QP to RESET state\n");
- return -EINVAL;
+ return ret;
}
int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 3738d17..a4696cd 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -20,7 +20,6 @@
#include <linux/major.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/compat.h>
struct evdev {
@@ -662,6 +661,7 @@
static struct input_handle *evdev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id)
{
struct evdev *evdev;
+ struct class_device *cdev;
int minor;
for (minor = 0; minor < EVDEV_MINORS && evdev_table[minor]; minor++);
@@ -687,11 +687,13 @@
evdev_table[minor] = evdev;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/event%d", minor);
- class_device_create(input_class,
+ cdev = class_device_create(&input_class, &dev->cdev,
MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor),
- dev->dev, "event%d", minor);
+ dev->cdev.dev, evdev->name);
+
+ /* temporary symlink to keep userspace happy */
+ sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj,
+ evdev->name);
return &evdev->handle;
}
@@ -701,9 +703,9 @@
struct evdev *evdev = handle->private;
struct evdev_list *list;
- class_device_destroy(input_class,
+ sysfs_remove_link(&input_class.subsys.kset.kobj, evdev->name);
+ class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor));
- devfs_remove("input/event%d", evdev->minor);
evdev->exist = 0;
if (evdev->open) {
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index ab09cf4..0506934 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -21,6 +21,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/sched.h> /* HZ */
/*#include <asm/io.h>*/
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 14ae558..3b1685f 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -22,12 +22,12 @@
#include <linux/interrupt.h>
#include <linux/poll.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("Input core");
MODULE_LICENSE("GPL");
+EXPORT_SYMBOL(input_allocate_device);
EXPORT_SYMBOL(input_register_device);
EXPORT_SYMBOL(input_unregister_device);
EXPORT_SYMBOL(input_register_handler);
@@ -39,7 +39,7 @@
EXPORT_SYMBOL(input_accept_process);
EXPORT_SYMBOL(input_flush_device);
EXPORT_SYMBOL(input_event);
-EXPORT_SYMBOL(input_class);
+EXPORT_SYMBOL_GPL(input_class);
#define INPUT_DEVICES 256
@@ -316,124 +316,21 @@
return NULL;
}
-
-/*
- * Input hotplugging interface - loading event handlers based on
- * device bitfields.
- */
-
-#ifdef CONFIG_HOTPLUG
-
-/*
- * Input hotplugging invokes what /proc/sys/kernel/hotplug says
- * (normally /sbin/hotplug) when input devices get added or removed.
- *
- * This invokes a user mode policy agent, typically helping to load driver
- * or other modules, configure the device, and more. Drivers can provide
- * a MODULE_DEVICE_TABLE to help with module loading subtasks.
- *
- */
-
-#define SPRINTF_BIT_A(bit, name, max) \
- do { \
- envp[i++] = scratch; \
- scratch += sprintf(scratch, name); \
- for (j = NBITS(max) - 1; j >= 0; j--) \
- if (dev->bit[j]) break; \
- for (; j >= 0; j--) \
- scratch += sprintf(scratch, "%lx ", dev->bit[j]); \
- scratch++; \
- } while (0)
-
-#define SPRINTF_BIT_A2(bit, name, max, ev) \
- do { \
- if (test_bit(ev, dev->evbit)) \
- SPRINTF_BIT_A(bit, name, max); \
- } while (0)
-
-static void input_call_hotplug(char *verb, struct input_dev *dev)
+static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap, int max)
{
- char *argv[3], **envp, *buf, *scratch;
- int i = 0, j, value;
+ int i;
+ int len = 0;
- if (!hotplug_path[0]) {
- printk(KERN_ERR "input.c: calling hotplug without a hotplug agent defined\n");
- return;
- }
- if (in_interrupt()) {
- printk(KERN_ERR "input.c: calling hotplug from interrupt\n");
- return;
- }
- if (!current->fs->root) {
- printk(KERN_WARNING "input.c: calling hotplug without valid filesystem\n");
- return;
- }
- if (!(envp = (char **) kmalloc(20 * sizeof(char *), GFP_KERNEL))) {
- printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n");
- return;
- }
- if (!(buf = kmalloc(1024, GFP_KERNEL))) {
- kfree (envp);
- printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n");
- return;
- }
+ for (i = NBITS(max) - 1; i > 0; i--)
+ if (bitmap[i])
+ break;
- argv[0] = hotplug_path;
- argv[1] = "input";
- argv[2] = NULL;
-
- envp[i++] = "HOME=/";
- envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-
- scratch = buf;
-
- envp[i++] = scratch;
- scratch += sprintf(scratch, "ACTION=%s", verb) + 1;
-
- envp[i++] = scratch;
- scratch += sprintf(scratch, "PRODUCT=%x/%x/%x/%x",
- dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1;
-
- if (dev->name) {
- envp[i++] = scratch;
- scratch += sprintf(scratch, "NAME=%s", dev->name) + 1;
- }
-
- if (dev->phys) {
- envp[i++] = scratch;
- scratch += sprintf(scratch, "PHYS=%s", dev->phys) + 1;
- }
-
- SPRINTF_BIT_A(evbit, "EV=", EV_MAX);
- SPRINTF_BIT_A2(keybit, "KEY=", KEY_MAX, EV_KEY);
- SPRINTF_BIT_A2(relbit, "REL=", REL_MAX, EV_REL);
- SPRINTF_BIT_A2(absbit, "ABS=", ABS_MAX, EV_ABS);
- SPRINTF_BIT_A2(mscbit, "MSC=", MSC_MAX, EV_MSC);
- SPRINTF_BIT_A2(ledbit, "LED=", LED_MAX, EV_LED);
- SPRINTF_BIT_A2(sndbit, "SND=", SND_MAX, EV_SND);
- SPRINTF_BIT_A2(ffbit, "FF=", FF_MAX, EV_FF);
- SPRINTF_BIT_A2(swbit, "SW=", SW_MAX, EV_SW);
-
- envp[i++] = NULL;
-
-#ifdef INPUT_DEBUG
- printk(KERN_DEBUG "input.c: calling %s %s [%s %s %s %s %s]\n",
- argv[0], argv[1], envp[0], envp[1], envp[2], envp[3], envp[4]);
-#endif
-
- value = call_usermodehelper(argv [0], argv, envp, 0);
-
- kfree(buf);
- kfree(envp);
-
-#ifdef INPUT_DEBUG
- if (value != 0)
- printk(KERN_DEBUG "input.c: hotplug returned %d\n", value);
-#endif
+ for (; i >= 0; i--)
+ len += snprintf(buf + len, max(buf_size - len, 0),
+ "%lx%s", bitmap[i], i > 0 ? " " : "");
+ return len;
}
-#endif
-
#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *proc_bus_input_dir;
@@ -455,37 +352,39 @@
return 0;
}
-#define SPRINTF_BIT_B(bit, name, max) \
- do { \
- len += sprintf(buf + len, "B: %s", name); \
- for (i = NBITS(max) - 1; i >= 0; i--) \
- if (dev->bit[i]) break; \
- for (; i >= 0; i--) \
- len += sprintf(buf + len, "%lx ", dev->bit[i]); \
- len += sprintf(buf + len, "\n"); \
+#define SPRINTF_BIT(ev, bm) \
+ do { \
+ len += sprintf(buf + len, "B: %s=", #ev); \
+ len += input_print_bitmap(buf + len, INT_MAX, \
+ dev->bm##bit, ev##_MAX); \
+ len += sprintf(buf + len, "\n"); \
} while (0)
-#define SPRINTF_BIT_B2(bit, name, max, ev) \
- do { \
- if (test_bit(ev, dev->evbit)) \
- SPRINTF_BIT_B(bit, name, max); \
+#define TEST_AND_SPRINTF_BIT(ev, bm) \
+ do { \
+ if (test_bit(EV_##ev, dev->evbit)) \
+ SPRINTF_BIT(ev, bm); \
} while (0)
static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
{
struct input_dev *dev;
struct input_handle *handle;
+ const char *path;
off_t at = 0;
- int i, len, cnt = 0;
+ int len, cnt = 0;
list_for_each_entry(dev, &input_dev_list, node) {
+ path = dev->dynalloc ? kobject_get_path(&dev->cdev.kobj, GFP_KERNEL) : NULL;
+
len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n",
dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version);
len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : "");
len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : "");
+ len += sprintf(buf + len, "S: Sysfs=%s\n", path ? path : "");
len += sprintf(buf + len, "H: Handlers=");
list_for_each_entry(handle, &dev->h_list, d_node)
@@ -493,15 +392,15 @@
len += sprintf(buf + len, "\n");
- SPRINTF_BIT_B(evbit, "EV=", EV_MAX);
- SPRINTF_BIT_B2(keybit, "KEY=", KEY_MAX, EV_KEY);
- SPRINTF_BIT_B2(relbit, "REL=", REL_MAX, EV_REL);
- SPRINTF_BIT_B2(absbit, "ABS=", ABS_MAX, EV_ABS);
- SPRINTF_BIT_B2(mscbit, "MSC=", MSC_MAX, EV_MSC);
- SPRINTF_BIT_B2(ledbit, "LED=", LED_MAX, EV_LED);
- SPRINTF_BIT_B2(sndbit, "SND=", SND_MAX, EV_SND);
- SPRINTF_BIT_B2(ffbit, "FF=", FF_MAX, EV_FF);
- SPRINTF_BIT_B2(swbit, "SW=", SW_MAX, EV_SW);
+ SPRINTF_BIT(EV, ev);
+ TEST_AND_SPRINTF_BIT(KEY, key);
+ TEST_AND_SPRINTF_BIT(REL, rel);
+ TEST_AND_SPRINTF_BIT(ABS, abs);
+ TEST_AND_SPRINTF_BIT(MSC, msc);
+ TEST_AND_SPRINTF_BIT(LED, led);
+ TEST_AND_SPRINTF_BIT(SND, snd);
+ TEST_AND_SPRINTF_BIT(FF, ff);
+ TEST_AND_SPRINTF_BIT(SW, sw);
len += sprintf(buf + len, "\n");
@@ -516,6 +415,8 @@
if (cnt >= count)
break;
}
+
+ kfree(path);
}
if (&dev->node == &input_dev_list)
@@ -606,6 +507,240 @@
static inline void input_proc_exit(void) { }
#endif
+#define INPUT_DEV_STRING_ATTR_SHOW(name) \
+static ssize_t input_dev_show_##name(struct class_device *dev, char *buf) \
+{ \
+ struct input_dev *input_dev = to_input_dev(dev); \
+ int retval; \
+ \
+ retval = down_interruptible(&input_dev->sem); \
+ if (retval) \
+ return retval; \
+ \
+ retval = sprintf(buf, "%s\n", input_dev->name ? input_dev->name : ""); \
+ \
+ up(&input_dev->sem); \
+ \
+ return retval; \
+} \
+static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL);
+
+INPUT_DEV_STRING_ATTR_SHOW(name);
+INPUT_DEV_STRING_ATTR_SHOW(phys);
+INPUT_DEV_STRING_ATTR_SHOW(uniq);
+
+static struct attribute *input_dev_attrs[] = {
+ &class_device_attr_name.attr,
+ &class_device_attr_phys.attr,
+ &class_device_attr_uniq.attr,
+ NULL
+};
+
+static struct attribute_group input_dev_group = {
+ .attrs = input_dev_attrs,
+};
+
+#define INPUT_DEV_ID_ATTR(name) \
+static ssize_t input_dev_show_id_##name(struct class_device *dev, char *buf) \
+{ \
+ struct input_dev *input_dev = to_input_dev(dev); \
+ return sprintf(buf, "%04x\n", input_dev->id.name); \
+} \
+static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL);
+
+INPUT_DEV_ID_ATTR(bustype);
+INPUT_DEV_ID_ATTR(vendor);
+INPUT_DEV_ID_ATTR(product);
+INPUT_DEV_ID_ATTR(version);
+
+static struct attribute *input_dev_id_attrs[] = {
+ &class_device_attr_bustype.attr,
+ &class_device_attr_vendor.attr,
+ &class_device_attr_product.attr,
+ &class_device_attr_version.attr,
+ NULL
+};
+
+static struct attribute_group input_dev_id_attr_group = {
+ .name = "id",
+ .attrs = input_dev_id_attrs,
+};
+
+#define INPUT_DEV_CAP_ATTR(ev, bm) \
+static ssize_t input_dev_show_cap_##bm(struct class_device *dev, char *buf) \
+{ \
+ struct input_dev *input_dev = to_input_dev(dev); \
+ return input_print_bitmap(buf, PAGE_SIZE, input_dev->bm##bit, ev##_MAX);\
+} \
+static CLASS_DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL);
+
+INPUT_DEV_CAP_ATTR(EV, ev);
+INPUT_DEV_CAP_ATTR(KEY, key);
+INPUT_DEV_CAP_ATTR(REL, rel);
+INPUT_DEV_CAP_ATTR(ABS, abs);
+INPUT_DEV_CAP_ATTR(MSC, msc);
+INPUT_DEV_CAP_ATTR(LED, led);
+INPUT_DEV_CAP_ATTR(SND, snd);
+INPUT_DEV_CAP_ATTR(FF, ff);
+INPUT_DEV_CAP_ATTR(SW, sw);
+
+static struct attribute *input_dev_caps_attrs[] = {
+ &class_device_attr_ev.attr,
+ &class_device_attr_key.attr,
+ &class_device_attr_rel.attr,
+ &class_device_attr_abs.attr,
+ &class_device_attr_msc.attr,
+ &class_device_attr_led.attr,
+ &class_device_attr_snd.attr,
+ &class_device_attr_ff.attr,
+ &class_device_attr_sw.attr,
+ NULL
+};
+
+static struct attribute_group input_dev_caps_attr_group = {
+ .name = "capabilities",
+ .attrs = input_dev_caps_attrs,
+};
+
+static void input_dev_release(struct class_device *class_dev)
+{
+ struct input_dev *dev = to_input_dev(class_dev);
+
+ kfree(dev);
+ module_put(THIS_MODULE);
+}
+
+/*
+ * Input hotplugging interface - loading event handlers based on
+ * device bitfields.
+ */
+static int input_add_hotplug_bm_var(char **envp, int num_envp, int *cur_index,
+ char *buffer, int buffer_size, int *cur_len,
+ const char *name, unsigned long *bitmap, int max)
+{
+ if (*cur_index >= num_envp - 1)
+ return -ENOMEM;
+
+ envp[*cur_index] = buffer + *cur_len;
+
+ *cur_len += snprintf(buffer + *cur_len, max(buffer_size - *cur_len, 0), name);
+ if (*cur_len > buffer_size)
+ return -ENOMEM;
+
+ *cur_len += input_print_bitmap(buffer + *cur_len,
+ max(buffer_size - *cur_len, 0),
+ bitmap, max) + 1;
+ if (*cur_len > buffer_size)
+ return -ENOMEM;
+
+ (*cur_index)++;
+ return 0;
+}
+
+#define INPUT_ADD_HOTPLUG_VAR(fmt, val...) \
+ do { \
+ int err = add_hotplug_env_var(envp, num_envp, &i, \
+ buffer, buffer_size, &len, \
+ fmt, val); \
+ if (err) \
+ return err; \
+ } while (0)
+
+#define INPUT_ADD_HOTPLUG_BM_VAR(name, bm, max) \
+ do { \
+ int err = input_add_hotplug_bm_var(envp, num_envp, &i, \
+ buffer, buffer_size, &len, \
+ name, bm, max); \
+ if (err) \
+ return err; \
+ } while (0)
+
+static int input_dev_hotplug(struct class_device *cdev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ struct input_dev *dev = to_input_dev(cdev);
+ int i = 0;
+ int len = 0;
+
+ INPUT_ADD_HOTPLUG_VAR("PRODUCT=%x/%x/%x/%x",
+ dev->id.bustype, dev->id.vendor,
+ dev->id.product, dev->id.version);
+ if (dev->name)
+ INPUT_ADD_HOTPLUG_VAR("NAME=\"%s\"", dev->name);
+ if (dev->phys)
+ INPUT_ADD_HOTPLUG_VAR("PHYS=\"%s\"", dev->phys);
+ if (dev->phys)
+ INPUT_ADD_HOTPLUG_VAR("UNIQ=\"%s\"", dev->uniq);
+
+ INPUT_ADD_HOTPLUG_BM_VAR("EV=", dev->evbit, EV_MAX);
+ if (test_bit(EV_KEY, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("KEY=", dev->keybit, KEY_MAX);
+ if (test_bit(EV_REL, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("REL=", dev->relbit, REL_MAX);
+ if (test_bit(EV_ABS, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("ABS=", dev->absbit, ABS_MAX);
+ if (test_bit(EV_MSC, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("MSC=", dev->mscbit, MSC_MAX);
+ if (test_bit(EV_LED, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("LED=", dev->ledbit, LED_MAX);
+ if (test_bit(EV_SND, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("SND=", dev->sndbit, SND_MAX);
+ if (test_bit(EV_FF, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("FF=", dev->ffbit, FF_MAX);
+ if (test_bit(EV_SW, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("SW=", dev->swbit, SW_MAX);
+
+ envp[i] = NULL;
+
+ return 0;
+}
+
+struct class input_class = {
+ .name = "input",
+ .release = input_dev_release,
+ .hotplug = input_dev_hotplug,
+};
+
+struct input_dev *input_allocate_device(void)
+{
+ struct input_dev *dev;
+
+ dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
+ if (dev) {
+ dev->dynalloc = 1;
+ dev->cdev.class = &input_class;
+ class_device_initialize(&dev->cdev);
+ INIT_LIST_HEAD(&dev->h_list);
+ INIT_LIST_HEAD(&dev->node);
+ }
+
+ return dev;
+}
+
+static void input_register_classdevice(struct input_dev *dev)
+{
+ static atomic_t input_no = ATOMIC_INIT(0);
+ const char *path;
+
+ __module_get(THIS_MODULE);
+
+ dev->dev = dev->cdev.dev;
+
+ snprintf(dev->cdev.class_id, sizeof(dev->cdev.class_id),
+ "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1);
+
+ path = kobject_get_path(&dev->cdev.class->subsys.kset.kobj, GFP_KERNEL);
+ printk(KERN_INFO "input: %s/%s as %s\n",
+ dev->name ? dev->name : "Unspecified device",
+ path ? path : "", dev->cdev.class_id);
+ kfree(path);
+
+ class_device_add(&dev->cdev);
+ sysfs_create_group(&dev->cdev.kobj, &input_dev_group);
+ sysfs_create_group(&dev->cdev.kobj, &input_dev_id_attr_group);
+ sysfs_create_group(&dev->cdev.kobj, &input_dev_caps_attr_group);
+}
+
void input_register_device(struct input_dev *dev)
{
struct input_handle *handle;
@@ -632,15 +767,15 @@
INIT_LIST_HEAD(&dev->h_list);
list_add_tail(&dev->node, &input_dev_list);
+ if (dev->dynalloc)
+ input_register_classdevice(dev);
+
list_for_each_entry(handler, &input_handler_list, node)
if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
if ((id = input_match_device(handler->id_table, dev)))
if ((handle = handler->connect(handler, dev, id)))
input_link_handle(handle);
-#ifdef CONFIG_HOTPLUG
- input_call_hotplug("add", dev);
-#endif
input_wakeup_procfs_readers();
}
@@ -660,12 +795,14 @@
handle->handler->disconnect(handle);
}
-#ifdef CONFIG_HOTPLUG
- input_call_hotplug("remove", dev);
-#endif
-
list_del_init(&dev->node);
+ if (dev->dynalloc) {
+ sysfs_remove_group(&dev->cdev.kobj, &input_dev_caps_attr_group);
+ sysfs_remove_group(&dev->cdev.kobj, &input_dev_id_attr_group);
+ class_device_unregister(&dev->cdev);
+ }
+
input_wakeup_procfs_readers();
}
@@ -748,16 +885,14 @@
.open = input_open_file,
};
-struct class *input_class;
-
static int __init input_init(void)
{
int err;
- input_class = class_create(THIS_MODULE, "input");
- if (IS_ERR(input_class)) {
- printk(KERN_ERR "input: unable to register input class\n");
- return PTR_ERR(input_class);
+ err = class_register(&input_class);
+ if (err) {
+ printk(KERN_ERR "input: unable to register input_dev class\n");
+ return err;
}
err = input_proc_init();
@@ -770,24 +905,18 @@
goto fail2;
}
- err = devfs_mk_dir("input");
- if (err)
- goto fail3;
-
return 0;
- fail3: unregister_chrdev(INPUT_MAJOR, "input");
fail2: input_proc_exit();
- fail1: class_destroy(input_class);
+ fail1: class_unregister(&input_class);
return err;
}
static void __exit input_exit(void)
{
input_proc_exit();
- devfs_remove("input");
unregister_chrdev(INPUT_MAJOR, "input");
- class_destroy(input_class);
+ class_unregister(&input_class);
}
subsys_initcall(input_init);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index e0938d1..20e2972 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -26,7 +26,6 @@
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Joystick device interfaces");
@@ -449,6 +448,7 @@
static struct input_handle *joydev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id)
{
struct joydev *joydev;
+ struct class_device *cdev;
int i, j, t, minor;
for (minor = 0; minor < JOYDEV_MINORS && joydev_table[minor]; minor++);
@@ -514,11 +514,13 @@
joydev_table[minor] = joydev;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/js%d", minor);
- class_device_create(input_class,
+ cdev = class_device_create(&input_class, &dev->cdev,
MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor),
- dev->dev, "js%d", minor);
+ dev->cdev.dev, joydev->name);
+
+ /* temporary symlink to keep userspace happy */
+ sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj,
+ joydev->name);
return &joydev->handle;
}
@@ -528,8 +530,8 @@
struct joydev *joydev = handle->private;
struct joydev_list *list;
- class_device_destroy(input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor));
- devfs_remove("input/js%d", joydev->minor);
+ sysfs_remove_link(&input_class.subsys.kset.kobj, joydev->name);
+ class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor));
joydev->exist = 0;
if (joydev->open) {
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index bf654301..4571ea3 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -34,6 +34,7 @@
#include <linux/init.h>
#include <linux/gameport.h>
#include <linux/input.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "FP-Gaming Assasin 3D joystick driver"
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index cf35ae6..704bf70 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -34,6 +34,7 @@
#include <linux/input.h>
#include <linux/gameport.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "Logitech ADI joystick family driver"
@@ -54,7 +55,7 @@
#define ADI_MIN_LENGTH 8
#define ADI_MIN_LEN_LENGTH 10
#define ADI_MIN_ID_LENGTH 66
-#define ADI_MAX_NAME_LENGTH 48
+#define ADI_MAX_NAME_LENGTH 64
#define ADI_MAX_CNAME_LENGTH 16
#define ADI_MAX_PHYS_LENGTH 64
@@ -106,7 +107,7 @@
*/
struct adi {
- struct input_dev dev;
+ struct input_dev *dev;
int length;
int ret;
int idx;
@@ -215,7 +216,7 @@
static int adi_decode(struct adi *adi)
{
- struct input_dev *dev = &adi->dev;
+ struct input_dev *dev = adi->dev;
char *abs = adi->abs;
short *key = adi->key;
int i, t;
@@ -318,7 +319,8 @@
for (i = 0; seq[i]; i++) {
gameport_trigger(gameport);
- if (seq[i] > 0) msleep(seq[i]);
+ if (seq[i] > 0)
+ msleep(seq[i]);
if (seq[i] < 0) {
mdelay(-seq[i]);
udelay(-seq[i]*14); /* It looks like mdelay() is off by approx 1.4% */
@@ -397,42 +399,46 @@
}
}
-static void adi_init_input(struct adi *adi, struct adi_port *port, int half)
+static int adi_init_input(struct adi *adi, struct adi_port *port, int half)
{
- int i, t;
+ struct input_dev *input_dev;
char buf[ADI_MAX_NAME_LENGTH];
+ int i, t;
- if (!adi->length) return;
-
- init_input_dev(&adi->dev);
+ adi->dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
t = adi->id < ADI_ID_MAX ? adi->id : ADI_ID_MAX;
snprintf(buf, ADI_MAX_PHYS_LENGTH, adi_names[t], adi->id);
- snprintf(adi->name, ADI_MAX_NAME_LENGTH, "Logitech %s", buf);
+ snprintf(adi->name, ADI_MAX_NAME_LENGTH, "Logitech %s [%s]", buf, adi->cname);
snprintf(adi->phys, ADI_MAX_PHYS_LENGTH, "%s/input%d", port->gameport->phys, half);
adi->abs = adi_abs[t];
adi->key = adi_key[t];
- adi->dev.open = adi_open;
- adi->dev.close = adi_close;
+ input_dev->name = adi->name;
+ input_dev->phys = adi->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_LOGITECH;
+ input_dev->id.product = adi->id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &port->gameport->dev;
+ input_dev->private = port;
- adi->dev.name = adi->name;
- adi->dev.phys = adi->phys;
- adi->dev.id.bustype = BUS_GAMEPORT;
- adi->dev.id.vendor = GAMEPORT_ID_VENDOR_LOGITECH;
- adi->dev.id.product = adi->id;
- adi->dev.id.version = 0x0100;
+ input_dev->open = adi_open;
+ input_dev->close = adi_close;
- adi->dev.private = port;
- adi->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++)
- set_bit(adi->abs[i], adi->dev.absbit);
+ set_bit(adi->abs[i], input_dev->absbit);
for (i = 0; i < adi->buttons; i++)
- set_bit(adi->key[i], adi->dev.keybit);
+ set_bit(adi->key[i], input_dev->keybit);
+
+ return 0;
}
static void adi_init_center(struct adi *adi)
@@ -445,17 +451,17 @@
for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) {
t = adi->abs[i];
- x = adi->dev.abs[t];
+ x = adi->dev->abs[t];
if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE)
x = i < adi->axes10 ? 512 : 128;
if (i < adi->axes10)
- input_set_abs_params(&adi->dev, t, 64, x * 2 - 64, 2, 16);
+ input_set_abs_params(adi->dev, t, 64, x * 2 - 64, 2, 16);
else if (i < adi->axes10 + adi->axes8)
- input_set_abs_params(&adi->dev, t, 48, x * 2 - 48, 1, 16);
+ input_set_abs_params(adi->dev, t, 48, x * 2 - 48, 1, 16);
else
- input_set_abs_params(&adi->dev, t, -1, 1, 0, 0);
+ input_set_abs_params(adi->dev, t, -1, 1, 0, 0);
}
}
@@ -469,7 +475,8 @@
int i;
int err;
- if (!(port = kzalloc(sizeof(struct adi_port), GFP_KERNEL)))
+ port = kzalloc(sizeof(struct adi_port), GFP_KERNEL);
+ if (!port)
return -ENOMEM;
port->gameport = gameport;
@@ -477,10 +484,8 @@
gameport_set_drvdata(gameport, port);
err = gameport_open(gameport, drv, GAMEPORT_MODE_RAW);
- if (err) {
- kfree(port);
- return err;
- }
+ if (err)
+ goto fail1;
adi_init_digital(gameport);
adi_read_packet(port);
@@ -490,13 +495,18 @@
for (i = 0; i < 2; i++) {
adi_id_decode(port->adi + i, port);
- adi_init_input(port->adi + i, port, i);
+
+ if (!port->adi[i].length)
+ continue;
+
+ err = adi_init_input(port->adi + i, port, i);
+ if (err)
+ goto fail2;
}
if (!port->adi[0].length && !port->adi[1].length) {
- gameport_close(gameport);
- kfree(port);
- return -ENODEV;
+ err = -ENODEV;
+ goto fail2;
}
gameport_set_poll_handler(gameport, adi_poll);
@@ -511,12 +521,18 @@
for (i = 0; i < 2; i++)
if (port->adi[i].length > 0) {
adi_init_center(port->adi + i);
- input_register_device(&port->adi[i].dev);
- printk(KERN_INFO "input: %s [%s] on %s\n",
- port->adi[i].name, port->adi[i].cname, gameport->phys);
+ input_register_device(port->adi[i].dev);
}
return 0;
+
+ fail2: for (i = 0; i < 2; i++)
+ if (port->adi[i].dev)
+ input_free_device(port->adi[i].dev);
+ gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
+ kfree(port);
+ return err;
}
static void adi_disconnect(struct gameport *gameport)
@@ -526,7 +542,7 @@
for (i = 0; i < 2; i++)
if (port->adi[i].length > 0)
- input_unregister_device(&port->adi[i].dev);
+ input_unregister_device(port->adi[i].dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(port);
diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
index e996183..8558a99 100644
--- a/drivers/input/joystick/amijoy.c
+++ b/drivers/input/joystick/amijoy.c
@@ -53,11 +53,9 @@
static int amijoy_used;
static DECLARE_MUTEX(amijoy_sem);
-static struct input_dev amijoy_dev[2];
+static struct input_dev *amijoy_dev[2];
static char *amijoy_phys[2] = { "amijoy/input0", "amijoy/input1" };
-static char *amijoy_name = "Amiga joystick";
-
static irqreturn_t amijoy_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
int i, data = 0, button = 0;
@@ -70,15 +68,15 @@
case 1: data = ~custom.joy1dat; button = (~ciaa.pra >> 7) & 1; break;
}
- input_regs(amijoy_dev + i, fp);
+ input_regs(amijoy_dev[i], fp);
- input_report_key(amijoy_dev + i, BTN_TRIGGER, button);
+ input_report_key(amijoy_dev[i], BTN_TRIGGER, button);
- input_report_abs(amijoy_dev + i, ABS_X, ((data >> 1) & 1) - ((data >> 9) & 1));
+ input_report_abs(amijoy_dev[i], ABS_X, ((data >> 1) & 1) - ((data >> 9) & 1));
data = ~(data ^ (data << 1));
- input_report_abs(amijoy_dev + i, ABS_Y, ((data >> 1) & 1) - ((data >> 9) & 1));
+ input_report_abs(amijoy_dev[i], ABS_Y, ((data >> 1) & 1) - ((data >> 9) & 1));
- input_sync(amijoy_dev + i);
+ input_sync(amijoy_dev[i]);
}
return IRQ_HANDLED;
}
@@ -114,39 +112,52 @@
static int __init amijoy_init(void)
{
int i, j;
+ int err;
- for (i = 0; i < 2; i++)
- if (amijoy[i]) {
- if (!request_mem_region(CUSTOM_PHYSADDR+10+i*2, 2,
- "amijoy [Denise]")) {
- if (i == 1 && amijoy[0]) {
- input_unregister_device(amijoy_dev);
- release_mem_region(CUSTOM_PHYSADDR+10, 2);
- }
- return -EBUSY;
- }
+ for (i = 0; i < 2; i++) {
+ if (!amijoy[i])
+ continue;
- amijoy_dev[i].open = amijoy_open;
- amijoy_dev[i].close = amijoy_close;
- amijoy_dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- amijoy_dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- amijoy_dev[i].keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- for (j = 0; j < 2; j++) {
- amijoy_dev[i].absmin[ABS_X + j] = -1;
- amijoy_dev[i].absmax[ABS_X + j] = 1;
- }
-
- amijoy_dev[i].name = amijoy_name;
- amijoy_dev[i].phys = amijoy_phys[i];
- amijoy_dev[i].id.bustype = BUS_AMIGA;
- amijoy_dev[i].id.vendor = 0x0001;
- amijoy_dev[i].id.product = 0x0003;
- amijoy_dev[i].id.version = 0x0100;
-
- input_register_device(amijoy_dev + i);
- printk(KERN_INFO "input: %s at joy%ddat\n", amijoy_name, i);
+ amijoy_dev[i] = input_allocate_device();
+ if (!amijoy_dev[i]) {
+ err = -ENOMEM;
+ goto fail;
}
+
+ if (!request_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2, "amijoy [Denise]")) {
+ input_free_device(amijoy_dev[i]);
+ err = -EBUSY;
+ goto fail;
+ }
+
+ amijoy_dev[i]->name = "Amiga joystick";
+ amijoy_dev[i]->phys = amijoy_phys[i];
+ amijoy_dev[i]->id.bustype = BUS_AMIGA;
+ amijoy_dev[i]->id.vendor = 0x0001;
+ amijoy_dev[i]->id.product = 0x0003;
+ amijoy_dev[i]->id.version = 0x0100;
+
+ amijoy_dev[i]->open = amijoy_open;
+ amijoy_dev[i]->close = amijoy_close;
+
+ amijoy_dev[i]->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ amijoy_dev[i]->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+ amijoy_dev[i]->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ for (j = 0; j < 2; j++) {
+ amijoy_dev[i]->absmin[ABS_X + j] = -1;
+ amijoy_dev[i]->absmax[ABS_X + j] = 1;
+ }
+
+ input_register_device(amijoy_dev[i]);
+ }
return 0;
+
+ fail: while (--i >= 0)
+ if (amijoy[i]) {
+ input_unregister_device(amijoy_dev[i]);
+ release_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2);
+ }
+ return err;
}
static void __exit amijoy_exit(void)
@@ -155,8 +166,8 @@
for (i = 0; i < 2; i++)
if (amijoy[i]) {
- input_unregister_device(amijoy_dev + i);
- release_mem_region(CUSTOM_PHYSADDR+10+i*2, 2);
+ input_unregister_device(amijoy_dev[i]);
+ release_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2);
}
}
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 64b1313..3121961 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -38,6 +38,7 @@
#include <linux/init.h>
#include <linux/input.h>
#include <linux/gameport.h>
+#include <linux/jiffies.h>
#include <asm/timex.h>
#define DRIVER_DESC "Analog joystick and gamepad driver"
@@ -111,7 +112,7 @@
static unsigned char analog_chf[] = { 0xf, 0x0, 0x1, 0x9, 0x2, 0x4, 0xc, 0x8, 0x3, 0x5, 0xb, 0x7, 0xd, 0xe, 0xa, 0x6 };
struct analog {
- struct input_dev dev;
+ struct input_dev *dev;
int mask;
short *buttons;
char name[ANALOG_MAX_NAME_LENGTH];
@@ -182,7 +183,7 @@
static void analog_decode(struct analog *analog, int *axes, int *initial, int buttons)
{
- struct input_dev *dev = &analog->dev;
+ struct input_dev *dev = analog->dev;
int i, j;
if (analog->mask & ANALOG_HAT_FCS)
@@ -428,27 +429,30 @@
* analog_init_device()
*/
-static void analog_init_device(struct analog_port *port, struct analog *analog, int index)
+static int analog_init_device(struct analog_port *port, struct analog *analog, int index)
{
+ struct input_dev *input_dev;
int i, j, t, v, w, x, y, z;
analog_name(analog);
sprintf(analog->phys, "%s/input%d", port->gameport->phys, index);
analog->buttons = (analog->mask & ANALOG_GAMEPAD) ? analog_pad_btn : analog_joy_btn;
- init_input_dev(&analog->dev);
+ analog->dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
- analog->dev.name = analog->name;
- analog->dev.phys = analog->phys;
- analog->dev.id.bustype = BUS_GAMEPORT;
- analog->dev.id.vendor = GAMEPORT_ID_VENDOR_ANALOG;
- analog->dev.id.product = analog->mask >> 4;
- analog->dev.id.version = 0x0100;
+ input_dev->name = analog->name;
+ input_dev->phys = analog->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_ANALOG;
+ input_dev->id.product = analog->mask >> 4;
+ input_dev->id.version = 0x0100;
- analog->dev.open = analog_open;
- analog->dev.close = analog_close;
- analog->dev.private = port;
- analog->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->open = analog_open;
+ input_dev->close = analog_close;
+ input_dev->private = port;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = j = 0; i < 4; i++)
if (analog->mask & (1 << i)) {
@@ -461,8 +465,6 @@
v = (x >> 3);
w = (x >> 3);
- set_bit(t, analog->dev.absbit);
-
if ((i == 2 || i == 3) && (j == 2 || j == 3) && (z > (y >> 3)))
x = y;
@@ -472,11 +474,7 @@
w = (x >> 4);
}
- analog->dev.absmax[t] = (x << 1) - v;
- analog->dev.absmin[t] = v;
- analog->dev.absfuzz[t] = port->fuzz;
- analog->dev.absflat[t] = w;
-
+ input_set_abs_params(input_dev, t, v, (x << 1) - v, port->fuzz, w);
j++;
}
@@ -484,41 +482,30 @@
if (analog->mask & analog_exts[i])
for (x = 0; x < 2; x++) {
t = analog_hats[j++];
- set_bit(t, analog->dev.absbit);
- analog->dev.absmax[t] = 1;
- analog->dev.absmin[t] = -1;
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
}
for (i = j = 0; i < 4; i++)
if (analog->mask & (0x10 << i))
- set_bit(analog->buttons[j++], analog->dev.keybit);
+ set_bit(analog->buttons[j++], input_dev->keybit);
if (analog->mask & ANALOG_BTNS_CHF)
for (i = 0; i < 2; i++)
- set_bit(analog->buttons[j++], analog->dev.keybit);
+ set_bit(analog->buttons[j++], input_dev->keybit);
if (analog->mask & ANALOG_HBTN_CHF)
for (i = 0; i < 4; i++)
- set_bit(analog->buttons[j++], analog->dev.keybit);
+ set_bit(analog->buttons[j++], input_dev->keybit);
for (i = 0; i < 4; i++)
if (analog->mask & (ANALOG_BTN_TL << i))
- set_bit(analog_pads[i], analog->dev.keybit);
+ set_bit(analog_pads[i], input_dev->keybit);
analog_decode(analog, port->axes, port->initial, port->buttons);
- input_register_device(&analog->dev);
+ input_register_device(analog->dev);
- printk(KERN_INFO "input: %s at %s", analog->name, port->gameport->phys);
-
- if (port->cooked)
- printk(" [ADC port]\n");
- else
- printk(" [%s timer, %d %sHz clock, %d ns res]\n", TIME_NAME,
- port->speed > 10000 ? (port->speed + 800) / 1000 : port->speed,
- port->speed > 10000 ? "M" : "k",
- port->speed > 10000 ? (port->loop * 1000) / (port->speed / 1000)
- : (port->loop * 1000000) / port->speed);
+ return 0;
}
/*
@@ -659,37 +646,41 @@
return - ENOMEM;
err = analog_init_port(gameport, drv, port);
- if (err) {
- kfree(port);
- return err;
- }
+ if (err)
+ goto fail1;
err = analog_init_masks(port);
- if (err) {
- gameport_close(gameport);
- gameport_set_drvdata(gameport, NULL);
- kfree(port);
- return err;
- }
+ if (err)
+ goto fail2;
gameport_set_poll_handler(gameport, analog_poll);
gameport_set_poll_interval(gameport, 10);
for (i = 0; i < 2; i++)
- if (port->analog[i].mask)
- analog_init_device(port, port->analog + i, i);
+ if (port->analog[i].mask) {
+ err = analog_init_device(port, port->analog + i, i);
+ if (err)
+ goto fail3;
+ }
return 0;
+
+ fail3: while (--i >= 0)
+ input_unregister_device(port->analog[i].dev);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
+ kfree(port);
+ return err;
}
static void analog_disconnect(struct gameport *gameport)
{
- int i;
struct analog_port *port = gameport_get_drvdata(gameport);
+ int i;
for (i = 0; i < 2; i++)
if (port->analog[i].mask)
- input_unregister_device(&port->analog[i].dev);
+ input_unregister_device(port->analog[i].dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
printk(KERN_INFO "analog.c: %d out of %d reads (%d%%) on %s failed\n",
diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c
index 0b2e9fa..1909f7e 100644
--- a/drivers/input/joystick/cobra.c
+++ b/drivers/input/joystick/cobra.c
@@ -34,6 +34,7 @@
#include <linux/init.h>
#include <linux/gameport.h>
#include <linux/input.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "Creative Labs Blaster GamePad Cobra driver"
@@ -44,13 +45,11 @@
#define COBRA_MAX_STROBE 45 /* 45 us max wait for first strobe */
#define COBRA_LENGTH 36
-static char* cobra_name = "Creative Labs Blaster GamePad Cobra";
-
static int cobra_btn[] = { BTN_START, BTN_SELECT, BTN_TL, BTN_TR, BTN_X, BTN_Y, BTN_Z, BTN_A, BTN_B, BTN_C, BTN_TL2, BTN_TR2, 0 };
struct cobra {
struct gameport *gameport;
- struct input_dev dev[2];
+ struct input_dev *dev[2];
int reads;
int bads;
unsigned char exists;
@@ -128,7 +127,7 @@
for (i = 0; i < 2; i++)
if (cobra->exists & r & (1 << i)) {
- dev = cobra->dev + i;
+ dev = cobra->dev[i];
input_report_abs(dev, ABS_X, ((data[i] >> 4) & 1) - ((data[i] >> 3) & 1));
input_report_abs(dev, ABS_Y, ((data[i] >> 2) & 1) - ((data[i] >> 1) & 1));
@@ -159,11 +158,13 @@
static int cobra_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct cobra *cobra;
+ struct input_dev *input_dev;
unsigned int data[2];
int i, j;
int err;
- if (!(cobra = kzalloc(sizeof(struct cobra), GFP_KERNEL)))
+ cobra = kzalloc(sizeof(struct cobra), GFP_KERNEL);
+ if (!cobra)
return -ENOMEM;
cobra->gameport = gameport;
@@ -191,38 +192,46 @@
gameport_set_poll_handler(gameport, cobra_poll);
gameport_set_poll_interval(gameport, 20);
- for (i = 0; i < 2; i++)
- if ((cobra->exists >> i) & 1) {
+ for (i = 0; i < 2; i++) {
+ if (~(cobra->exists >> i) & 1)
+ continue;
- sprintf(cobra->phys[i], "%s/input%d", gameport->phys, i);
-
- cobra->dev[i].private = cobra;
- cobra->dev[i].open = cobra_open;
- cobra->dev[i].close = cobra_close;
-
- cobra->dev[i].name = cobra_name;
- cobra->dev[i].phys = cobra->phys[i];
- cobra->dev[i].id.bustype = BUS_GAMEPORT;
- cobra->dev[i].id.vendor = GAMEPORT_ID_VENDOR_CREATIVE;
- cobra->dev[i].id.product = 0x0008;
- cobra->dev[i].id.version = 0x0100;
-
- cobra->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- input_set_abs_params(&cobra->dev[i], ABS_X, -1, 1, 0, 0);
- input_set_abs_params(&cobra->dev[i], ABS_Y, -1, 1, 0, 0);
-
- for (j = 0; cobra_btn[j]; j++)
- set_bit(cobra_btn[j], cobra->dev[i].keybit);
-
- input_register_device(&cobra->dev[i]);
- printk(KERN_INFO "input: %s on %s\n", cobra_name, gameport->phys);
+ cobra->dev[i] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ err = -ENOMEM;
+ goto fail3;
}
+ sprintf(cobra->phys[i], "%s/input%d", gameport->phys, i);
+
+ input_dev->name = "Creative Labs Blaster GamePad Cobra";
+ input_dev->phys = cobra->phys[i];
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_CREATIVE;
+ input_dev->id.product = 0x0008;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = cobra;
+
+ input_dev->open = cobra_open;
+ input_dev->close = cobra_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0);
+ for (j = 0; cobra_btn[j]; j++)
+ set_bit(cobra_btn[j], input_dev->keybit);
+
+ input_register_device(cobra->dev[i]);
+ }
+
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: for (i = 0; i < 2; i++)
+ if (cobra->dev[i])
+ input_unregister_device(cobra->dev[i]);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
kfree(cobra);
return err;
}
@@ -234,7 +243,7 @@
for (i = 0; i < 2; i++)
if ((cobra->exists >> i) & 1)
- input_unregister_device(cobra->dev + i);
+ input_unregister_device(cobra->dev[i]);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(cobra);
diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c
index 2a3e4bb2..499344c 100644
--- a/drivers/input/joystick/db9.c
+++ b/drivers/input/joystick/db9.c
@@ -43,25 +43,28 @@
MODULE_DESCRIPTION("Atari, Amstrad, Commodore, Amiga, Sega, etc. joystick driver");
MODULE_LICENSE("GPL");
-static int db9[] __initdata = { -1, 0 };
-static int db9_nargs __initdata = 0;
-module_param_array_named(dev, db9, int, &db9_nargs, 0);
+struct db9_config {
+ int args[2];
+ int nargs;
+};
+
+#define DB9_MAX_PORTS 3
+static struct db9_config db9[DB9_MAX_PORTS] __initdata;
+
+module_param_array_named(dev, db9[0].args, int, &db9[0].nargs, 0);
MODULE_PARM_DESC(dev, "Describes first attached device (<parport#>,<type>)");
-
-static int db9_2[] __initdata = { -1, 0 };
-static int db9_nargs_2 __initdata = 0;
-module_param_array_named(dev2, db9_2, int, &db9_nargs_2, 0);
+module_param_array_named(dev2, db9[1].args, int, &db9[0].nargs, 0);
MODULE_PARM_DESC(dev2, "Describes second attached device (<parport#>,<type>)");
-
-static int db9_3[] __initdata = { -1, 0 };
-static int db9_nargs_3 __initdata = 0;
-module_param_array_named(dev3, db9_3, int, &db9_nargs_3, 0);
+module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0);
MODULE_PARM_DESC(dev3, "Describes third attached device (<parport#>,<type>)");
__obsolete_setup("db9=");
__obsolete_setup("db9_2=");
__obsolete_setup("db9_3=");
+#define DB9_ARG_PARPORT 0
+#define DB9_ARG_MODE 1
+
#define DB9_MULTI_STICK 0x01
#define DB9_MULTI2_STICK 0x02
#define DB9_GENESIS_PAD 0x03
@@ -87,40 +90,53 @@
#define DB9_NORMAL 0x0a
#define DB9_NOSELECT 0x08
-#define DB9_MAX_DEVICES 2
-
#define DB9_GENESIS6_DELAY 14
#define DB9_REFRESH_TIME HZ/100
+#define DB9_MAX_DEVICES 2
+
+struct db9_mode_data {
+ const char *name;
+ const short *buttons;
+ int n_buttons;
+ int n_pads;
+ int n_axis;
+ int bidirectional;
+ int reverse;
+};
+
struct db9 {
- struct input_dev dev[DB9_MAX_DEVICES];
+ struct input_dev *dev[DB9_MAX_DEVICES];
struct timer_list timer;
struct pardevice *pd;
int mode;
int used;
struct semaphore sem;
- char phys[2][32];
+ char phys[DB9_MAX_DEVICES][32];
};
static struct db9 *db9_base[3];
-static short db9_multi_btn[] = { BTN_TRIGGER, BTN_THUMB };
-static short db9_genesis_btn[] = { BTN_START, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_MODE };
-static short db9_cd32_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START };
-
-static char db9_buttons[DB9_MAX_PAD] = { 0, 1, 2, 4, 0, 6, 8, 9, 1, 1, 7, 9, 9 };
-static short *db9_btn[DB9_MAX_PAD] = { NULL, db9_multi_btn, db9_multi_btn, db9_genesis_btn, NULL, db9_genesis_btn,
- db9_genesis_btn, db9_cd32_btn, db9_multi_btn, db9_multi_btn, db9_cd32_btn,
- db9_cd32_btn, db9_cd32_btn };
-static char *db9_name[DB9_MAX_PAD] = { NULL, "Multisystem joystick", "Multisystem joystick (2 fire)", "Genesis pad",
- NULL, "Genesis 5 pad", "Genesis 6 pad", "Saturn pad", "Multisystem (0.8.0.2) joystick",
- "Multisystem (0.8.0.2-dual) joystick", "Amiga CD-32 pad", "Saturn dpp", "Saturn dpp dual" };
-
-static const int db9_max_pads[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 6, 1, 2, 1, 6, 12 };
-static const int db9_num_axis[DB9_MAX_PAD] = { 0, 2, 2, 2, 0, 2, 2, 7, 2, 2, 2 ,7, 7 };
+static const short db9_multi_btn[] = { BTN_TRIGGER, BTN_THUMB };
+static const short db9_genesis_btn[] = { BTN_START, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_MODE };
+static const short db9_cd32_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START };
static const short db9_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_RZ, ABS_Z, ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y };
-static const int db9_bidirectional[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 0, 0 };
-static const int db9_reverse[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 0, 0 };
+
+static const struct db9_mode_data db9_modes[] = {
+ { NULL, NULL, 0, 0, 0, 0, 0 },
+ { "Multisystem joystick", db9_multi_btn, 1, 1, 2, 1, 1 },
+ { "Multisystem joystick (2 fire)", db9_multi_btn, 2, 1, 2, 1, 1 },
+ { "Genesis pad", db9_genesis_btn, 4, 1, 2, 1, 1 },
+ { NULL, NULL, 0, 0, 0, 0, 0 },
+ { "Genesis 5 pad", db9_genesis_btn, 6, 1, 2, 1, 1 },
+ { "Genesis 6 pad", db9_genesis_btn, 8, 1, 2, 1, 1 },
+ { "Saturn pad", db9_cd32_btn, 9, 6, 7, 0, 1 },
+ { "Multisystem (0.8.0.2) joystick", db9_multi_btn, 1, 1, 2, 1, 1 },
+ { "Multisystem (0.8.0.2-dual) joystick", db9_multi_btn, 1, 2, 2, 1, 1 },
+ { "Amiga CD-32 pad", db9_cd32_btn, 7, 1, 2, 1, 1 },
+ { "Saturn dpp", db9_cd32_btn, 9, 6, 7, 0, 0 },
+ { "Saturn dpp dual", db9_cd32_btn, 9, 12, 7, 0, 0 },
+};
/*
* Saturn controllers
@@ -342,7 +358,7 @@
default:
return -1;
}
- max_pads = min(db9_max_pads[mode], DB9_MAX_DEVICES);
+ max_pads = min(db9_modes[mode].n_pads, DB9_MAX_DEVICES);
for (tmp = 0, i = 0; i < n; i++) {
id = db9_saturn_read_packet(port, data, type + i, 1);
tmp = db9_saturn_report(id, data, dev, tmp, max_pads);
@@ -354,17 +370,18 @@
{
struct db9 *db9 = (void *) private;
struct parport *port = db9->pd->port;
- struct input_dev *dev = db9->dev;
+ struct input_dev *dev = db9->dev[0];
+ struct input_dev *dev2 = db9->dev[1];
int data, i;
- switch(db9->mode) {
+ switch (db9->mode) {
case DB9_MULTI_0802_2:
data = parport_read_data(port) >> 3;
- input_report_abs(dev + 1, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
- input_report_abs(dev + 1, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
- input_report_key(dev + 1, BTN_TRIGGER, ~data & DB9_FIRE1);
+ input_report_abs(dev2, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
+ input_report_abs(dev2, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
+ input_report_key(dev2, BTN_TRIGGER, ~data & DB9_FIRE1);
case DB9_MULTI_0802:
@@ -405,7 +422,7 @@
input_report_key(dev, BTN_C, ~data & DB9_FIRE2);
parport_write_control(port, DB9_NORMAL);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_key(dev, BTN_A, ~data & DB9_FIRE1);
input_report_key(dev, BTN_START, ~data & DB9_FIRE2);
@@ -414,7 +431,7 @@
case DB9_GENESIS5_PAD:
parport_write_control(port, DB9_NOSELECT);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
@@ -422,7 +439,7 @@
input_report_key(dev, BTN_C, ~data & DB9_FIRE2);
parport_write_control(port, DB9_NORMAL);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_key(dev, BTN_A, ~data & DB9_FIRE1);
input_report_key(dev, BTN_X, ~data & DB9_FIRE2);
@@ -434,7 +451,7 @@
parport_write_control(port, DB9_NOSELECT); /* 1 */
udelay(DB9_GENESIS6_DELAY);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
@@ -443,7 +460,7 @@
parport_write_control(port, DB9_NORMAL);
udelay(DB9_GENESIS6_DELAY);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_key(dev, BTN_A, ~data & DB9_FIRE1);
input_report_key(dev, BTN_START, ~data & DB9_FIRE2);
@@ -477,7 +494,7 @@
case DB9_CD32_PAD:
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
@@ -489,7 +506,7 @@
parport_write_control(port, 0x02);
parport_write_control(port, 0x0a);
input_report_key(dev, db9_cd32_btn[i], ~data & DB9_FIRE2);
- }
+ }
parport_write_control(port, 0x00);
break;
@@ -513,7 +530,7 @@
if (!db9->used++) {
parport_claim(db9->pd);
parport_write_data(port, 0xff);
- if (db9_reverse[db9->mode]) {
+ if (db9_modes[db9->mode].reverse) {
parport_data_reverse(port);
parport_write_control(port, DB9_NORMAL);
}
@@ -539,117 +556,160 @@
up(&db9->sem);
}
-static struct db9 __init *db9_probe(int *config, int nargs)
+static struct db9 __init *db9_probe(int parport, int mode)
{
struct db9 *db9;
+ const struct db9_mode_data *db9_mode;
struct parport *pp;
+ struct pardevice *pd;
+ struct input_dev *input_dev;
int i, j;
+ int err;
- if (config[0] < 0)
- return NULL;
-
- if (nargs < 2) {
- printk(KERN_ERR "db9.c: Device type must be specified.\n");
- return NULL;
+ if (mode < 1 || mode >= DB9_MAX_PAD || !db9_modes[mode].n_buttons) {
+ printk(KERN_ERR "db9.c: Bad device type %d\n", mode);
+ err = -EINVAL;
+ goto err_out;
}
- if (config[1] < 1 || config[1] >= DB9_MAX_PAD || !db9_buttons[config[1]]) {
- printk(KERN_ERR "db9.c: bad config\n");
- return NULL;
- }
+ db9_mode = &db9_modes[mode];
- pp = parport_find_number(config[0]);
+ pp = parport_find_number(parport);
if (!pp) {
printk(KERN_ERR "db9.c: no such parport\n");
- return NULL;
+ err = -ENODEV;
+ goto err_out;
}
- if (db9_bidirectional[config[1]]) {
- if (!(pp->modes & PARPORT_MODE_TRISTATE)) {
- printk(KERN_ERR "db9.c: specified parport is not bidirectional\n");
- parport_put_port(pp);
- return NULL;
- }
+ if (db9_mode[mode].bidirectional && !(pp->modes & PARPORT_MODE_TRISTATE)) {
+ printk(KERN_ERR "db9.c: specified parport is not bidirectional\n");
+ err = -EINVAL;
+ goto err_put_pp;
}
- if (!(db9 = kzalloc(sizeof(struct db9), GFP_KERNEL))) {
- parport_put_port(pp);
- return NULL;
+ pd = parport_register_device(pp, "db9", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+ if (!pd) {
+ printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n");
+ err = -EBUSY;
+ goto err_put_pp;
+ }
+
+ db9 = kzalloc(sizeof(struct db9), GFP_KERNEL);
+ if (!db9) {
+ printk(KERN_ERR "db9.c: Not enough memory\n");
+ err = -ENOMEM;
+ goto err_unreg_pardev;
}
init_MUTEX(&db9->sem);
- db9->mode = config[1];
+ db9->pd = pd;
+ db9->mode = mode;
init_timer(&db9->timer);
db9->timer.data = (long) db9;
db9->timer.function = db9_timer;
- db9->pd = parport_register_device(pp, "db9", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
- parport_put_port(pp);
+ for (i = 0; i < (min(db9_mode->n_pads, DB9_MAX_DEVICES)); i++) {
- if (!db9->pd) {
- printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n");
- kfree(db9);
- return NULL;
- }
-
- for (i = 0; i < (min(db9_max_pads[db9->mode], DB9_MAX_DEVICES)); i++) {
+ db9->dev[i] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "db9.c: Not enough memory for input device\n");
+ err = -ENOMEM;
+ goto err_free_devs;
+ }
sprintf(db9->phys[i], "%s/input%d", db9->pd->port->name, i);
- db9->dev[i].private = db9;
- db9->dev[i].open = db9_open;
- db9->dev[i].close = db9_close;
+ input_dev->name = db9_mode->name;
+ input_dev->phys = db9->phys[i];
+ input_dev->id.bustype = BUS_PARPORT;
+ input_dev->id.vendor = 0x0002;
+ input_dev->id.product = mode;
+ input_dev->id.version = 0x0100;
+ input_dev->private = db9;
- db9->dev[i].name = db9_name[db9->mode];
- db9->dev[i].phys = db9->phys[i];
- db9->dev[i].id.bustype = BUS_PARPORT;
- db9->dev[i].id.vendor = 0x0002;
- db9->dev[i].id.product = config[1];
- db9->dev[i].id.version = 0x0100;
+ input_dev->open = db9_open;
+ input_dev->close = db9_close;
- db9->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- for (j = 0; j < db9_buttons[db9->mode]; j++)
- set_bit(db9_btn[db9->mode][j], db9->dev[i].keybit);
- for (j = 0; j < db9_num_axis[db9->mode]; j++) {
- set_bit(db9_abs[j], db9->dev[i].absbit);
- if (j < 2) {
- db9->dev[i].absmin[db9_abs[j]] = -1;
- db9->dev[i].absmax[db9_abs[j]] = 1;
- } else {
- db9->dev[i].absmin[db9_abs[j]] = 1;
- db9->dev[i].absmax[db9_abs[j]] = 255;
- db9->dev[i].absflat[db9_abs[j]] = 0;
- }
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ for (j = 0; j < db9_mode->n_buttons; j++)
+ set_bit(db9_mode->buttons[j], input_dev->keybit);
+ for (j = 0; j < db9_mode->n_axis; j++) {
+ if (j < 2)
+ input_set_abs_params(input_dev, db9_abs[j], -1, 1, 0, 0);
+ else
+ input_set_abs_params(input_dev, db9_abs[j], 1, 255, 0, 0);
}
- input_register_device(db9->dev + i);
- printk(KERN_INFO "input: %s on %s\n", db9->dev[i].name, db9->pd->port->name);
+
+ input_register_device(input_dev);
}
+ parport_put_port(pp);
return db9;
+
+ err_free_devs:
+ while (--i >= 0)
+ input_unregister_device(db9->dev[i]);
+ kfree(db9);
+ err_unreg_pardev:
+ parport_unregister_device(pd);
+ err_put_pp:
+ parport_put_port(pp);
+ err_out:
+ return ERR_PTR(err);
+}
+
+static void __exit db9_remove(struct db9 *db9)
+{
+ int i;
+
+ for (i = 0; i < min(db9_modes[db9->mode].n_pads, DB9_MAX_DEVICES); i++)
+ input_unregister_device(db9->dev[i]);
+ parport_unregister_device(db9->pd);
+ kfree(db9);
}
static int __init db9_init(void)
{
- db9_base[0] = db9_probe(db9, db9_nargs);
- db9_base[1] = db9_probe(db9_2, db9_nargs_2);
- db9_base[2] = db9_probe(db9_3, db9_nargs_3);
+ int i;
+ int have_dev = 0;
+ int err = 0;
- if (db9_base[0] || db9_base[1] || db9_base[2])
- return 0;
+ for (i = 0; i < DB9_MAX_PORTS; i++) {
+ if (db9[i].nargs == 0 || db9[i].args[DB9_ARG_PARPORT] < 0)
+ continue;
- return -ENODEV;
+ if (db9[i].nargs < 2) {
+ printk(KERN_ERR "db9.c: Device type must be specified.\n");
+ err = -EINVAL;
+ break;
+ }
+
+ db9_base[i] = db9_probe(db9[i].args[DB9_ARG_PARPORT],
+ db9[i].args[DB9_ARG_MODE]);
+ if (IS_ERR(db9_base[i])) {
+ err = PTR_ERR(db9_base[i]);
+ break;
+ }
+
+ have_dev = 1;
+ }
+
+ if (err) {
+ while (--i >= 0)
+ db9_remove(db9_base[i]);
+ return err;
+ }
+
+ return have_dev ? 0 : -ENODEV;
}
static void __exit db9_exit(void)
{
- int i, j;
+ int i;
- for (i = 0; i < 3; i++)
- if (db9_base[i]) {
- for (j = 0; j < min(db9_max_pads[db9_base[i]->mode], DB9_MAX_DEVICES); j++)
- input_unregister_device(db9_base[i]->dev + j);
- parport_unregister_device(db9_base[i]->pd);
- }
+ for (i = 0; i < DB9_MAX_PORTS; i++)
+ if (db9_base[i])
+ db9_remove(db9_base[i]);
}
module_init(db9_init);
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index 5427bf9..7df2d82 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -41,20 +41,22 @@
MODULE_DESCRIPTION("NES, SNES, N64, MultiSystem, PSX gamepad driver");
MODULE_LICENSE("GPL");
-static int gc[] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_nargs __initdata = 0;
-module_param_array_named(map, gc, int, &gc_nargs, 0);
-MODULE_PARM_DESC(map, "Describers first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)");
+#define GC_MAX_PORTS 3
+#define GC_MAX_DEVICES 5
-static int gc_2[] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_nargs_2 __initdata = 0;
-module_param_array_named(map2, gc_2, int, &gc_nargs_2, 0);
-MODULE_PARM_DESC(map2, "Describers second set of devices");
+struct gc_config {
+ int args[GC_MAX_DEVICES + 1];
+ int nargs;
+};
-static int gc_3[] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_nargs_3 __initdata = 0;
-module_param_array_named(map3, gc_3, int, &gc_nargs_3, 0);
-MODULE_PARM_DESC(map3, "Describers third set of devices");
+static struct gc_config gc[GC_MAX_PORTS] __initdata;
+
+module_param_array_named(map, gc[0].args, int, &gc[0].nargs, 0);
+MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)");
+module_param_array_named(map2, gc[1].args, int, &gc[1].nargs, 0);
+MODULE_PARM_DESC(map2, "Describes second set of devices");
+module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0);
+MODULE_PARM_DESC(map3, "Describes third set of devices");
__obsolete_setup("gc=");
__obsolete_setup("gc_2=");
@@ -77,12 +79,12 @@
struct gc {
struct pardevice *pd;
- struct input_dev dev[5];
+ struct input_dev *dev[GC_MAX_DEVICES];
struct timer_list timer;
unsigned char pads[GC_MAX + 1];
int used;
struct semaphore sem;
- char phys[5][32];
+ char phys[GC_MAX_DEVICES][32];
};
static struct gc *gc_base[3];
@@ -330,7 +332,6 @@
static void gc_timer(unsigned long private)
{
struct gc *gc = (void *) private;
- struct input_dev *dev = gc->dev;
unsigned char data[GC_MAX_LENGTH];
unsigned char data_psx[5][GC_PSX_BYTES];
int i, j, s;
@@ -357,16 +358,16 @@
if (data[31 - j] & s) axes[1] |= 1 << j;
}
- input_report_abs(dev + i, ABS_X, axes[0]);
- input_report_abs(dev + i, ABS_Y, -axes[1]);
+ input_report_abs(gc->dev[i], ABS_X, axes[0]);
+ input_report_abs(gc->dev[i], ABS_Y, -axes[1]);
- input_report_abs(dev + i, ABS_HAT0X, !(s & data[6]) - !(s & data[7]));
- input_report_abs(dev + i, ABS_HAT0Y, !(s & data[4]) - !(s & data[5]));
+ input_report_abs(gc->dev[i], ABS_HAT0X, !(s & data[6]) - !(s & data[7]));
+ input_report_abs(gc->dev[i], ABS_HAT0Y, !(s & data[4]) - !(s & data[5]));
for (j = 0; j < 10; j++)
- input_report_key(dev + i, gc_n64_btn[j], s & data[gc_n64_bytes[j]]);
+ input_report_key(gc->dev[i], gc_n64_btn[j], s & data[gc_n64_bytes[j]]);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
}
}
}
@@ -384,19 +385,19 @@
s = gc_status_bit[i];
if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) {
- input_report_abs(dev + i, ABS_X, !(s & data[6]) - !(s & data[7]));
- input_report_abs(dev + i, ABS_Y, !(s & data[4]) - !(s & data[5]));
+ input_report_abs(gc->dev[i], ABS_X, !(s & data[6]) - !(s & data[7]));
+ input_report_abs(gc->dev[i], ABS_Y, !(s & data[4]) - !(s & data[5]));
}
if (s & gc->pads[GC_NES])
for (j = 0; j < 4; j++)
- input_report_key(dev + i, gc_snes_btn[j], s & data[gc_nes_bytes[j]]);
+ input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_nes_bytes[j]]);
if (s & gc->pads[GC_SNES])
for (j = 0; j < 8; j++)
- input_report_key(dev + i, gc_snes_btn[j], s & data[gc_snes_bytes[j]]);
+ input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_snes_bytes[j]]);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
}
}
@@ -413,15 +414,15 @@
s = gc_status_bit[i];
if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) {
- input_report_abs(dev + i, ABS_X, !(s & data[2]) - !(s & data[3]));
- input_report_abs(dev + i, ABS_Y, !(s & data[0]) - !(s & data[1]));
- input_report_key(dev + i, BTN_TRIGGER, s & data[4]);
+ input_report_abs(gc->dev[i], ABS_X, !(s & data[2]) - !(s & data[3]));
+ input_report_abs(gc->dev[i], ABS_Y, !(s & data[0]) - !(s & data[1]));
+ input_report_key(gc->dev[i], BTN_TRIGGER, s & data[4]);
}
if (s & gc->pads[GC_MULTI2])
- input_report_key(dev + i, BTN_THUMB, s & data[5]);
+ input_report_key(gc->dev[i], BTN_THUMB, s & data[5]);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
}
}
@@ -438,44 +439,44 @@
case GC_PSX_RUMBLE:
- input_report_key(dev + i, BTN_THUMBL, ~data_psx[i][0] & 0x04);
- input_report_key(dev + i, BTN_THUMBR, ~data_psx[i][0] & 0x02);
+ input_report_key(gc->dev[i], BTN_THUMBL, ~data_psx[i][0] & 0x04);
+ input_report_key(gc->dev[i], BTN_THUMBR, ~data_psx[i][0] & 0x02);
case GC_PSX_NEGCON:
case GC_PSX_ANALOG:
- if(gc->pads[GC_DDR] & gc_status_bit[i]) {
+ if (gc->pads[GC_DDR] & gc_status_bit[i]) {
for(j = 0; j < 4; j++)
- input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
+ input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
} else {
for (j = 0; j < 4; j++)
- input_report_abs(dev + i, gc_psx_abs[j+2], data_psx[i][j + 2]);
+ input_report_abs(gc->dev[i], gc_psx_abs[j+2], data_psx[i][j + 2]);
- input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
- input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
+ input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
+ input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
}
for (j = 0; j < 8; j++)
- input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
+ input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
- input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08);
- input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01);
+ input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08);
+ input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
break;
case GC_PSX_NORMAL:
- if(gc->pads[GC_DDR] & gc_status_bit[i]) {
+ if (gc->pads[GC_DDR] & gc_status_bit[i]) {
for(j = 0; j < 4; j++)
- input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
+ input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
} else {
- input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
- input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
+ input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
+ input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
/* for some reason if the extra axes are left unset they drift */
/* for (j = 0; j < 4; j++)
- input_report_abs(dev + i, gc_psx_abs[j+2], 128);
+ input_report_abs(gc->dev[i], gc_psx_abs[j+2], 128);
* This needs to be debugged properly,
* maybe fuzz processing needs to be done in input_sync()
* --vojtech
@@ -483,12 +484,12 @@
}
for (j = 0; j < 8; j++)
- input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
+ input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
- input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08);
- input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01);
+ input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08);
+ input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
break;
@@ -533,177 +534,212 @@
up(&gc->sem);
}
-static struct gc __init *gc_probe(int *config, int nargs)
+static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type)
+{
+ struct input_dev *input_dev;
+ int i;
+
+ if (!pad_type)
+ return 0;
+
+ if (pad_type < 1 || pad_type > GC_MAX) {
+ printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", pad_type);
+ return -EINVAL;
+ }
+
+ gc->dev[idx] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "gamecon.c: Not enough memory for input device\n");
+ return -ENOMEM;
+ }
+
+ input_dev->name = gc_names[pad_type];
+ input_dev->phys = gc->phys[idx];
+ input_dev->id.bustype = BUS_PARPORT;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = pad_type;
+ input_dev->id.version = 0x0100;
+ input_dev->private = gc;
+
+ input_dev->open = gc_open;
+ input_dev->close = gc_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; i < 2; i++)
+ input_set_abs_params(input_dev, ABS_X + i, -1, 1, 0, 0);
+
+ gc->pads[0] |= gc_status_bit[idx];
+ gc->pads[pad_type] |= gc_status_bit[idx];
+
+ switch (pad_type) {
+
+ case GC_N64:
+ for (i = 0; i < 10; i++)
+ set_bit(gc_n64_btn[i], input_dev->keybit);
+
+ for (i = 0; i < 2; i++) {
+ input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
+ input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
+ }
+
+ break;
+
+ case GC_SNES:
+ for (i = 4; i < 8; i++)
+ set_bit(gc_snes_btn[i], input_dev->keybit);
+ case GC_NES:
+ for (i = 0; i < 4; i++)
+ set_bit(gc_snes_btn[i], input_dev->keybit);
+ break;
+
+ case GC_MULTI2:
+ set_bit(BTN_THUMB, input_dev->keybit);
+ case GC_MULTI:
+ set_bit(BTN_TRIGGER, input_dev->keybit);
+ break;
+
+ case GC_PSX:
+ for (i = 0; i < 6; i++)
+ input_set_abs_params(input_dev, gc_psx_abs[i], 4, 252, 0, 2);
+ for (i = 0; i < 12; i++)
+ set_bit(gc_psx_btn[i], input_dev->keybit);
+
+ break;
+
+ case GC_DDR:
+ for (i = 0; i < 4; i++)
+ set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
+ for (i = 0; i < 12; i++)
+ set_bit(gc_psx_btn[i], input_dev->keybit);
+
+ break;
+ }
+
+ return 0;
+}
+
+static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
{
struct gc *gc;
struct parport *pp;
- int i, j;
+ struct pardevice *pd;
+ int i;
+ int err;
- if (config[0] < 0)
- return NULL;
-
- if (nargs < 2) {
- printk(KERN_ERR "gamecon.c: at least one device must be specified\n");
- return NULL;
- }
-
- pp = parport_find_number(config[0]);
-
+ pp = parport_find_number(parport);
if (!pp) {
printk(KERN_ERR "gamecon.c: no such parport\n");
- return NULL;
+ err = -EINVAL;
+ goto err_out;
}
- if (!(gc = kzalloc(sizeof(struct gc), GFP_KERNEL))) {
- parport_put_port(pp);
- return NULL;
+ pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+ if (!pd) {
+ printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n");
+ err = -EBUSY;
+ goto err_put_pp;
+ }
+
+ gc = kzalloc(sizeof(struct gc), GFP_KERNEL);
+ if (!gc) {
+ printk(KERN_ERR "gamecon.c: Not enough memory\n");
+ err = -ENOMEM;
+ goto err_unreg_pardev;
}
init_MUTEX(&gc->sem);
-
- gc->pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
-
- parport_put_port(pp);
-
- if (!gc->pd) {
- printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n");
- kfree(gc);
- return NULL;
- }
-
- parport_claim(gc->pd);
-
+ gc->pd = pd;
init_timer(&gc->timer);
gc->timer.data = (long) gc;
gc->timer.function = gc_timer;
- for (i = 0; i < nargs - 1; i++) {
-
- if (!config[i + 1])
+ for (i = 0; i < n_pads; i++) {
+ if (!pads[i])
continue;
- if (config[i + 1] < 1 || config[i + 1] > GC_MAX) {
- printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", config[i + 1]);
- continue;
- }
-
- gc->dev[i].private = gc;
- gc->dev[i].open = gc_open;
- gc->dev[i].close = gc_close;
-
- gc->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (j = 0; j < 2; j++) {
- set_bit(ABS_X + j, gc->dev[i].absbit);
- gc->dev[i].absmin[ABS_X + j] = -1;
- gc->dev[i].absmax[ABS_X + j] = 1;
- }
-
- gc->pads[0] |= gc_status_bit[i];
- gc->pads[config[i + 1]] |= gc_status_bit[i];
-
- switch(config[i + 1]) {
-
- case GC_N64:
- for (j = 0; j < 10; j++)
- set_bit(gc_n64_btn[j], gc->dev[i].keybit);
-
- for (j = 0; j < 2; j++) {
- set_bit(ABS_X + j, gc->dev[i].absbit);
- gc->dev[i].absmin[ABS_X + j] = -127;
- gc->dev[i].absmax[ABS_X + j] = 126;
- gc->dev[i].absflat[ABS_X + j] = 2;
- set_bit(ABS_HAT0X + j, gc->dev[i].absbit);
- gc->dev[i].absmin[ABS_HAT0X + j] = -1;
- gc->dev[i].absmax[ABS_HAT0X + j] = 1;
- }
-
- break;
-
- case GC_SNES:
- for (j = 4; j < 8; j++)
- set_bit(gc_snes_btn[j], gc->dev[i].keybit);
- case GC_NES:
- for (j = 0; j < 4; j++)
- set_bit(gc_snes_btn[j], gc->dev[i].keybit);
- break;
-
- case GC_MULTI2:
- set_bit(BTN_THUMB, gc->dev[i].keybit);
- case GC_MULTI:
- set_bit(BTN_TRIGGER, gc->dev[i].keybit);
- break;
-
- case GC_PSX:
- case GC_DDR:
- if(config[i + 1] == GC_DDR) {
- for (j = 0; j < 4; j++)
- set_bit(gc_psx_ddr_btn[j], gc->dev[i].keybit);
- } else {
- for (j = 0; j < 6; j++) {
- set_bit(gc_psx_abs[j], gc->dev[i].absbit);
- gc->dev[i].absmin[gc_psx_abs[j]] = 4;
- gc->dev[i].absmax[gc_psx_abs[j]] = 252;
- gc->dev[i].absflat[gc_psx_abs[j]] = 2;
- }
- }
-
- for (j = 0; j < 12; j++)
- set_bit(gc_psx_btn[j], gc->dev[i].keybit);
-
- break;
- }
-
sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i);
+ err = gc_setup_pad(gc, i, pads[i]);
+ if (err)
+ goto err_free_devs;
- gc->dev[i].name = gc_names[config[i + 1]];
- gc->dev[i].phys = gc->phys[i];
- gc->dev[i].id.bustype = BUS_PARPORT;
- gc->dev[i].id.vendor = 0x0001;
- gc->dev[i].id.product = config[i + 1];
- gc->dev[i].id.version = 0x0100;
+ input_register_device(gc->dev[i]);
}
- parport_release(gc->pd);
-
if (!gc->pads[0]) {
- parport_unregister_device(gc->pd);
- kfree(gc);
- return NULL;
+ printk(KERN_ERR "gamecon.c: No valid devices specified\n");
+ err = -EINVAL;
+ goto err_free_gc;
}
- for (i = 0; i < 5; i++)
- if (gc->pads[0] & gc_status_bit[i]) {
- input_register_device(gc->dev + i);
- printk(KERN_INFO "input: %s on %s\n", gc->dev[i].name, gc->pd->port->name);
- }
-
+ parport_put_port(pp);
return gc;
+
+ err_free_devs:
+ while (--i >= 0)
+ input_unregister_device(gc->dev[i]);
+ err_free_gc:
+ kfree(gc);
+ err_unreg_pardev:
+ parport_unregister_device(pd);
+ err_put_pp:
+ parport_put_port(pp);
+ err_out:
+ return ERR_PTR(err);
+}
+
+static void __exit gc_remove(struct gc *gc)
+{
+ int i;
+
+ for (i = 0; i < GC_MAX_DEVICES; i++)
+ if (gc->dev[i])
+ input_unregister_device(gc->dev[i]);
+ parport_unregister_device(gc->pd);
+ kfree(gc);
}
static int __init gc_init(void)
{
- gc_base[0] = gc_probe(gc, gc_nargs);
- gc_base[1] = gc_probe(gc_2, gc_nargs_2);
- gc_base[2] = gc_probe(gc_3, gc_nargs_3);
+ int i;
+ int have_dev = 0;
+ int err = 0;
- if (gc_base[0] || gc_base[1] || gc_base[2])
- return 0;
+ for (i = 0; i < GC_MAX_PORTS; i++) {
+ if (gc[i].nargs == 0 || gc[i].args[0] < 0)
+ continue;
- return -ENODEV;
+ if (gc[i].nargs < 2) {
+ printk(KERN_ERR "gamecon.c: at least one device must be specified\n");
+ err = -EINVAL;
+ break;
+ }
+
+ gc_base[i] = gc_probe(gc[i].args[0], gc[i].args + 1, gc[i].nargs - 1);
+ if (IS_ERR(gc_base[i])) {
+ err = PTR_ERR(gc_base[i]);
+ break;
+ }
+
+ have_dev = 1;
+ }
+
+ if (err) {
+ while (--i >= 0)
+ gc_remove(gc_base[i]);
+ return err;
+ }
+
+ return have_dev ? 0 : -ENODEV;
}
static void __exit gc_exit(void)
{
- int i, j;
+ int i;
- for (i = 0; i < 3; i++)
- if (gc_base[i]) {
- for (j = 0; j < 5; j++)
- if (gc_base[i]->pads[0] & gc_status_bit[j])
- input_unregister_device(gc_base[i]->dev + j);
- parport_unregister_device(gc_base[i]->pd);
- }
+ for (i = 0; i < GC_MAX_PORTS; i++)
+ if (gc_base[i])
+ gc_remove(gc_base[i]);
}
module_init(gc_init);
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 8e4f92b..8a3ad45 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -35,6 +35,7 @@
#include <linux/init.h>
#include <linux/input.h>
#include <linux/gameport.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "Genius Flight 2000 joystick driver"
@@ -81,7 +82,7 @@
struct gf2k {
struct gameport *gameport;
- struct input_dev dev;
+ struct input_dev *dev;
int reads;
int bads;
unsigned char id;
@@ -175,7 +176,7 @@
static void gf2k_read(struct gf2k *gf2k, unsigned char *data)
{
- struct input_dev *dev = &gf2k->dev;
+ struct input_dev *dev = gf2k->dev;
int i, t;
for (i = 0; i < 4 && i < gf2k_axes[gf2k->id]; i++)
@@ -239,13 +240,19 @@
static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct gf2k *gf2k;
+ struct input_dev *input_dev;
unsigned char data[GF2K_LENGTH];
int i, err;
- if (!(gf2k = kzalloc(sizeof(struct gf2k), GFP_KERNEL)))
- return -ENOMEM;
+ gf2k = kzalloc(sizeof(struct gf2k), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!gf2k || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
gf2k->gameport = gameport;
+ gf2k->dev = input_dev;
gameport_set_drvdata(gameport, gf2k);
@@ -295,53 +302,52 @@
gf2k->length = gf2k_lens[gf2k->id];
- init_input_dev(&gf2k->dev);
+ input_dev->name = gf2k_names[gf2k->id];
+ input_dev->phys = gf2k->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_GENIUS;
+ input_dev->id.product = gf2k->id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = gf2k;
- gf2k->dev.private = gf2k;
- gf2k->dev.open = gf2k_open;
- gf2k->dev.close = gf2k_close;
- gf2k->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- gf2k->dev.name = gf2k_names[gf2k->id];
- gf2k->dev.phys = gf2k->phys;
- gf2k->dev.id.bustype = BUS_GAMEPORT;
- gf2k->dev.id.vendor = GAMEPORT_ID_VENDOR_GENIUS;
- gf2k->dev.id.product = gf2k->id;
- gf2k->dev.id.version = 0x0100;
+ input_dev->open = gf2k_open;
+ input_dev->close = gf2k_close;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; i < gf2k_axes[gf2k->id]; i++)
- set_bit(gf2k_abs[i], gf2k->dev.absbit);
+ set_bit(gf2k_abs[i], input_dev->absbit);
for (i = 0; i < gf2k_hats[gf2k->id]; i++) {
- set_bit(ABS_HAT0X + i, gf2k->dev.absbit);
- gf2k->dev.absmin[ABS_HAT0X + i] = -1;
- gf2k->dev.absmax[ABS_HAT0X + i] = 1;
+ set_bit(ABS_HAT0X + i, input_dev->absbit);
+ input_dev->absmin[ABS_HAT0X + i] = -1;
+ input_dev->absmax[ABS_HAT0X + i] = 1;
}
for (i = 0; i < gf2k_joys[gf2k->id]; i++)
- set_bit(gf2k_btn_joy[i], gf2k->dev.keybit);
+ set_bit(gf2k_btn_joy[i], input_dev->keybit);
for (i = 0; i < gf2k_pads[gf2k->id]; i++)
- set_bit(gf2k_btn_pad[i], gf2k->dev.keybit);
+ set_bit(gf2k_btn_pad[i], input_dev->keybit);
gf2k_read_packet(gameport, gf2k->length, data);
gf2k_read(gf2k, data);
for (i = 0; i < gf2k_axes[gf2k->id]; i++) {
- gf2k->dev.absmax[gf2k_abs[i]] = (i < 2) ? gf2k->dev.abs[gf2k_abs[i]] * 2 - 32 :
- gf2k->dev.abs[gf2k_abs[0]] + gf2k->dev.abs[gf2k_abs[1]] - 32;
- gf2k->dev.absmin[gf2k_abs[i]] = 32;
- gf2k->dev.absfuzz[gf2k_abs[i]] = 8;
- gf2k->dev.absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
+ input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 :
+ input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32;
+ input_dev->absmin[gf2k_abs[i]] = 32;
+ input_dev->absfuzz[gf2k_abs[i]] = 8;
+ input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
}
- input_register_device(&gf2k->dev);
- printk(KERN_INFO "input: %s on %s\n", gf2k_names[gf2k->id], gameport->phys);
+ input_register_device(gf2k->dev);
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
+ input_free_device(input_dev);
kfree(gf2k);
return err;
}
@@ -350,7 +356,7 @@
{
struct gf2k *gf2k = gameport_get_drvdata(gameport);
- input_unregister_device(&gf2k->dev);
+ input_unregister_device(gf2k->dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(gf2k);
diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c
index 9d3f910..a936e7a 100644
--- a/drivers/input/joystick/grip.c
+++ b/drivers/input/joystick/grip.c
@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/input.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "Gravis GrIP protocol joystick driver"
@@ -55,7 +56,7 @@
struct grip {
struct gameport *gameport;
- struct input_dev dev[2];
+ struct input_dev *dev[2];
unsigned char mode[2];
int reads;
int bads;
@@ -190,7 +191,7 @@
for (i = 0; i < 2; i++) {
- dev = grip->dev + i;
+ dev = grip->dev[i];
grip->reads++;
switch (grip->mode[i]) {
@@ -297,6 +298,7 @@
static int grip_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct grip *grip;
+ struct input_dev *input_dev;
unsigned int data[GRIP_LENGTH_XT];
int i, j, t;
int err;
@@ -339,48 +341,56 @@
gameport_set_poll_handler(gameport, grip_poll);
gameport_set_poll_interval(gameport, 20);
- for (i = 0; i < 2; i++)
- if (grip->mode[i]) {
+ for (i = 0; i < 2; i++) {
+ if (!grip->mode[i])
+ continue;
- sprintf(grip->phys[i], "%s/input%d", gameport->phys, i);
-
- grip->dev[i].private = grip;
-
- grip->dev[i].open = grip_open;
- grip->dev[i].close = grip_close;
-
- grip->dev[i].name = grip_name[grip->mode[i]];
- grip->dev[i].phys = grip->phys[i];
- grip->dev[i].id.bustype = BUS_GAMEPORT;
- grip->dev[i].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
- grip->dev[i].id.product = grip->mode[i];
- grip->dev[i].id.version = 0x0100;
-
- grip->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (j = 0; (t = grip_abs[grip->mode[i]][j]) >= 0; j++) {
-
- if (j < grip_cen[grip->mode[i]])
- input_set_abs_params(&grip->dev[i], t, 14, 52, 1, 2);
- else if (j < grip_anx[grip->mode[i]])
- input_set_abs_params(&grip->dev[i], t, 3, 57, 1, 0);
- else
- input_set_abs_params(&grip->dev[i], t, -1, 1, 0, 0);
- }
-
- for (j = 0; (t = grip_btn[grip->mode[i]][j]) >= 0; j++)
- if (t > 0)
- set_bit(t, grip->dev[i].keybit);
-
- printk(KERN_INFO "input: %s on %s\n",
- grip_name[grip->mode[i]], gameport->phys);
- input_register_device(grip->dev + i);
+ grip->dev[i] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ err = -ENOMEM;
+ goto fail3;
}
+ sprintf(grip->phys[i], "%s/input%d", gameport->phys, i);
+
+ input_dev->name = grip_name[grip->mode[i]];
+ input_dev->phys = grip->phys[i];
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
+ input_dev->id.product = grip->mode[i];
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = grip;
+
+ input_dev->open = grip_open;
+ input_dev->close = grip_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (j = 0; (t = grip_abs[grip->mode[i]][j]) >= 0; j++) {
+
+ if (j < grip_cen[grip->mode[i]])
+ input_set_abs_params(input_dev, t, 14, 52, 1, 2);
+ else if (j < grip_anx[grip->mode[i]])
+ input_set_abs_params(input_dev, t, 3, 57, 1, 0);
+ else
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
+ }
+
+ for (j = 0; (t = grip_btn[grip->mode[i]][j]) >= 0; j++)
+ if (t > 0)
+ set_bit(t, input_dev->keybit);
+
+ input_register_device(grip->dev[i]);
+ }
+
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: for (i = 0; i < 2; i++)
+ if (grip->dev[i])
+ input_unregister_device(grip->dev[i]);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
kfree(grip);
return err;
}
@@ -391,8 +401,8 @@
int i;
for (i = 0; i < 2; i++)
- if (grip->mode[i])
- input_unregister_device(grip->dev + i);
+ if (grip->dev[i])
+ input_unregister_device(grip->dev[i]);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(grip);
diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c
index da17eee..51a9122 100644
--- a/drivers/input/joystick/grip_mp.c
+++ b/drivers/input/joystick/grip_mp.c
@@ -19,6 +19,7 @@
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "Gravis Grip Multiport driver"
@@ -32,23 +33,37 @@
#define dbg(format, arg...) do {} while (0)
#endif
+#define GRIP_MAX_PORTS 4
/*
* Grip multiport state
*/
+struct grip_port {
+ struct input_dev *dev;
+ int mode;
+ int registered;
+
+ /* individual gamepad states */
+ int buttons;
+ int xaxes;
+ int yaxes;
+ int dirty; /* has the state been updated? */
+};
+
struct grip_mp {
struct gameport *gameport;
- struct input_dev dev[4];
- int mode[4];
- int registered[4];
+ struct grip_port *port[GRIP_MAX_PORTS];
+// struct input_dev *dev[4];
+// int mode[4];
+// int registered[4];
int reads;
int bads;
/* individual gamepad states */
- int buttons[4];
- int xaxes[4];
- int yaxes[4];
- int dirty[4]; /* has the state been updated? */
+// int buttons[4];
+// int xaxes[4];
+// int yaxes[4];
+// int dirty[4]; /* has the state been updated? */
};
/*
@@ -85,16 +100,16 @@
#define GRIP_MODE_GP 2
#define GRIP_MODE_C64 3
-static int grip_btn_gp[] = { BTN_TR, BTN_TL, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, -1 };
-static int grip_btn_c64[] = { BTN_JOYSTICK, -1 };
+static const int grip_btn_gp[] = { BTN_TR, BTN_TL, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, -1 };
+static const int grip_btn_c64[] = { BTN_JOYSTICK, -1 };
-static int grip_abs_gp[] = { ABS_X, ABS_Y, -1 };
-static int grip_abs_c64[] = { ABS_X, ABS_Y, -1 };
+static const int grip_abs_gp[] = { ABS_X, ABS_Y, -1 };
+static const int grip_abs_c64[] = { ABS_X, ABS_Y, -1 };
-static int *grip_abs[] = { NULL, NULL, grip_abs_gp, grip_abs_c64 };
-static int *grip_btn[] = { NULL, NULL, grip_btn_gp, grip_btn_c64 };
+static const int *grip_abs[] = { NULL, NULL, grip_abs_gp, grip_abs_c64 };
+static const int *grip_btn[] = { NULL, NULL, grip_btn_gp, grip_btn_c64 };
-static char *grip_name[] = { NULL, NULL, "Gravis Grip Pad", "Commodore 64 Joystick" };
+static const char *grip_name[] = { NULL, NULL, "Gravis Grip Pad", "Commodore 64 Joystick" };
static const int init_seq[] = {
1, 0, 1, 1, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 1,
@@ -104,9 +119,9 @@
/* Maps multiport directional values to X,Y axis values (each axis encoded in 3 bits) */
-static int axis_map[] = { 5, 9, 1, 5, 6, 10, 2, 6, 4, 8, 0, 4, 5, 9, 1, 5 };
+static const int axis_map[] = { 5, 9, 1, 5, 6, 10, 2, 6, 4, 8, 0, 4, 5, 9, 1, 5 };
-static void register_slot(int i, struct grip_mp *grip);
+static int register_slot(int i, struct grip_mp *grip);
/*
* Returns whether an odd or even number of bits are on in pkt.
@@ -353,9 +368,10 @@
static int get_and_decode_packet(struct grip_mp *grip, int flags)
{
+ struct grip_port *port;
u32 packet;
int joytype = 0;
- int slot = 0;
+ int slot;
/* Get a packet and check for validity */
@@ -377,6 +393,8 @@
if ((slot < 0) || (slot > 3))
return flags;
+ port = grip->port[slot];
+
/*
* Handle "reset" packets, which occur at startup, and when gamepads
* are removed or plugged in. May contain configuration of a new gamepad.
@@ -385,14 +403,14 @@
joytype = (packet >> 16) & 0x1f;
if (!joytype) {
- if (grip->registered[slot]) {
+ if (port->registered) {
printk(KERN_INFO "grip_mp: removing %s, slot %d\n",
- grip_name[grip->mode[slot]], slot);
- input_unregister_device(grip->dev + slot);
- grip->registered[slot] = 0;
+ grip_name[port->mode], slot);
+ input_unregister_device(port->dev);
+ port->registered = 0;
}
dbg("Reset: grip multiport slot %d\n", slot);
- grip->mode[slot] = GRIP_MODE_RESET;
+ port->mode = GRIP_MODE_RESET;
flags |= IO_SLOT_CHANGE;
return flags;
}
@@ -402,17 +420,17 @@
if (joytype == 0x1f) {
int dir = (packet >> 8) & 0xf; /* eight way directional value */
- grip->buttons[slot] = (~packet) & 0xff;
- grip->yaxes[slot] = ((axis_map[dir] >> 2) & 3) - 1;
- grip->xaxes[slot] = (axis_map[dir] & 3) - 1;
- grip->dirty[slot] = 1;
+ port->buttons = (~packet) & 0xff;
+ port->yaxes = ((axis_map[dir] >> 2) & 3) - 1;
+ port->xaxes = (axis_map[dir] & 3) - 1;
+ port->dirty = 1;
- if (grip->mode[slot] == GRIP_MODE_RESET)
+ if (port->mode == GRIP_MODE_RESET)
flags |= IO_SLOT_CHANGE;
- grip->mode[slot] = GRIP_MODE_GP;
+ port->mode = GRIP_MODE_GP;
- if (!grip->registered[slot]) {
+ if (!port->registered) {
dbg("New Grip pad in multiport slot %d.\n", slot);
register_slot(slot, grip);
}
@@ -445,9 +463,9 @@
return 0;
for (slot = 0; slot < 4; slot++) {
- if (grip->mode[slot] == GRIP_MODE_RESET)
+ if (grip->port[slot]->mode == GRIP_MODE_RESET)
invalid = 1;
- if (grip->mode[slot] != GRIP_MODE_NONE)
+ if (grip->port[slot]->mode != GRIP_MODE_NONE)
active = 1;
}
@@ -484,7 +502,7 @@
/* Get packets, store multiport state, and check state's validity */
for (tries = 0; tries < 4096; tries++) {
- if ( slots_valid(grip) ) {
+ if (slots_valid(grip)) {
initialized = 1;
break;
}
@@ -499,24 +517,24 @@
static void report_slot(struct grip_mp *grip, int slot)
{
- struct input_dev *dev = &(grip->dev[slot]);
- int i, buttons = grip->buttons[slot];
+ struct grip_port *port = grip->port[slot];
+ int i;
/* Store button states with linux input driver */
for (i = 0; i < 8; i++)
- input_report_key(dev, grip_btn_gp[i], (buttons >> i) & 1);
+ input_report_key(port->dev, grip_btn_gp[i], (port->buttons >> i) & 1);
/* Store axis states with linux driver */
- input_report_abs(dev, ABS_X, grip->xaxes[slot]);
- input_report_abs(dev, ABS_Y, grip->yaxes[slot]);
+ input_report_abs(port->dev, ABS_X, port->xaxes);
+ input_report_abs(port->dev, ABS_Y, port->yaxes);
/* Tell the receiver of the events to process them */
- input_sync(dev);
+ input_sync(port->dev);
- grip->dirty[slot] = 0;
+ port->dirty = 0;
}
/*
@@ -540,7 +558,7 @@
}
for (i = 0; i < 4; i++)
- if (grip->dirty[i])
+ if (grip->port[i]->dirty)
report_slot(grip, i);
}
@@ -571,35 +589,43 @@
* Tell the linux input layer about a newly plugged-in gamepad.
*/
-static void register_slot(int slot, struct grip_mp *grip)
+static int register_slot(int slot, struct grip_mp *grip)
{
+ struct grip_port *port = grip->port[slot];
+ struct input_dev *input_dev;
int j, t;
- grip->dev[slot].private = grip;
- grip->dev[slot].open = grip_open;
- grip->dev[slot].close = grip_close;
- grip->dev[slot].name = grip_name[grip->mode[slot]];
- grip->dev[slot].id.bustype = BUS_GAMEPORT;
- grip->dev[slot].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
- grip->dev[slot].id.product = 0x0100 + grip->mode[slot];
- grip->dev[slot].id.version = 0x0100;
- grip->dev[slot].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ port->dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
- for (j = 0; (t = grip_abs[grip->mode[slot]][j]) >= 0; j++)
- input_set_abs_params(&grip->dev[slot], t, -1, 1, 0, 0);
+ input_dev->name = grip_name[port->mode];
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
+ input_dev->id.product = 0x0100 + port->mode;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &grip->gameport->dev;
+ input_dev->private = grip;
- for (j = 0; (t = grip_btn[grip->mode[slot]][j]) >= 0; j++)
+ input_dev->open = grip_open;
+ input_dev->close = grip_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (j = 0; (t = grip_abs[port->mode][j]) >= 0; j++)
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
+
+ for (j = 0; (t = grip_btn[port->mode][j]) >= 0; j++)
if (t > 0)
- set_bit(t, grip->dev[slot].keybit);
+ set_bit(t, input_dev->keybit);
- input_register_device(grip->dev + slot);
- grip->registered[slot] = 1;
+ input_register_device(port->dev);
+ port->registered = 1;
- if (grip->dirty[slot]) /* report initial state, if any */
+ if (port->dirty) /* report initial state, if any */
report_slot(grip, slot);
- printk(KERN_INFO "grip_mp: added %s, slot %d\n",
- grip_name[grip->mode[slot]], slot);
+ return 0;
}
static int grip_connect(struct gameport *gameport, struct gameport_driver *drv)
@@ -626,7 +652,7 @@
goto fail2;
}
- if (!grip->mode[0] && !grip->mode[1] && !grip->mode[2] && !grip->mode[3]) {
+ if (!grip->port[0]->mode && !grip->port[1]->mode && !grip->port[2]->mode && !grip->port[3]->mode) {
/* nothing plugged in */
err = -ENODEV;
goto fail2;
@@ -646,8 +672,8 @@
int i;
for (i = 0; i < 4; i++)
- if (grip->registered[i])
- input_unregister_device(grip->dev + i);
+ if (grip->port[i]->registered)
+ input_unregister_device(grip->port[i]->dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(grip);
diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c
index 6a70ec4..6e2c721 100644
--- a/drivers/input/joystick/guillemot.c
+++ b/drivers/input/joystick/guillemot.c
@@ -35,6 +35,7 @@
#include <linux/init.h>
#include <linux/gameport.h>
#include <linux/input.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "Guillemot Digital joystick driver"
@@ -67,7 +68,7 @@
struct guillemot {
struct gameport *gameport;
- struct input_dev dev;
+ struct input_dev *dev;
int bads;
int reads;
struct guillemot_type *type;
@@ -123,7 +124,7 @@
static void guillemot_poll(struct gameport *gameport)
{
struct guillemot *guillemot = gameport_get_drvdata(gameport);
- struct input_dev *dev = &guillemot->dev;
+ struct input_dev *dev = guillemot->dev;
u8 data[GUILLEMOT_MAX_LENGTH];
int i;
@@ -179,14 +180,20 @@
static int guillemot_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct guillemot *guillemot;
+ struct input_dev *input_dev;
u8 data[GUILLEMOT_MAX_LENGTH];
int i, t;
int err;
- if (!(guillemot = kzalloc(sizeof(struct guillemot), GFP_KERNEL)))
- return -ENOMEM;
+ guillemot = kzalloc(sizeof(struct guillemot), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!guillemot || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
guillemot->gameport = gameport;
+ guillemot->dev = input_dev;
gameport_set_drvdata(gameport, guillemot);
@@ -216,41 +223,40 @@
gameport_set_poll_interval(gameport, 20);
sprintf(guillemot->phys, "%s/input0", gameport->phys);
-
guillemot->type = guillemot_type + i;
- guillemot->dev.private = guillemot;
- guillemot->dev.open = guillemot_open;
- guillemot->dev.close = guillemot_close;
+ input_dev->name = guillemot_type[i].name;
+ input_dev->phys = guillemot->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT;
+ input_dev->id.product = guillemot_type[i].id;
+ input_dev->id.version = (int)data[14] << 8 | data[15];
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = guillemot;
- guillemot->dev.name = guillemot_type[i].name;
- guillemot->dev.phys = guillemot->phys;
- guillemot->dev.id.bustype = BUS_GAMEPORT;
- guillemot->dev.id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT;
- guillemot->dev.id.product = guillemot_type[i].id;
- guillemot->dev.id.version = (int)data[14] << 8 | data[15];
+ input_dev->open = guillemot_open;
+ input_dev->close = guillemot_close;
- guillemot->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; (t = guillemot->type->abs[i]) >= 0; i++)
- input_set_abs_params(&guillemot->dev, t, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
if (guillemot->type->hat) {
- input_set_abs_params(&guillemot->dev, ABS_HAT0X, -1, 1, 0, 0);
- input_set_abs_params(&guillemot->dev, ABS_HAT0Y, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0Y, -1, 1, 0, 0);
}
for (i = 0; (t = guillemot->type->btn[i]) >= 0; i++)
- set_bit(t, guillemot->dev.keybit);
+ set_bit(t, input_dev->keybit);
- input_register_device(&guillemot->dev);
- printk(KERN_INFO "input: %s ver %d.%02d on %s\n",
- guillemot->type->name, data[14], data[15], gameport->phys);
+ input_register_device(guillemot->dev);
return 0;
fail2: gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
+ input_free_device(input_dev);
kfree(guillemot);
return err;
}
@@ -260,7 +266,7 @@
struct guillemot *guillemot = gameport_get_drvdata(gameport);
printk(KERN_INFO "guillemot.c: Failed %d reads out of %d on %s\n", guillemot->reads, guillemot->bads, guillemot->phys);
- input_unregister_device(&guillemot->dev);
+ input_unregister_device(guillemot->dev);
gameport_close(gameport);
kfree(guillemot);
}
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index e31b7b9..64b9c31 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -144,7 +144,7 @@
int is_update;
/* Check this effect type is supported by this device */
- if (!test_bit(effect->type, iforce->dev.ffbit))
+ if (!test_bit(effect->type, iforce->dev->ffbit))
return -EINVAL;
/*
@@ -152,30 +152,31 @@
*/
if (effect->id == -1) {
- for (id=0; id < FF_EFFECTS_MAX; ++id)
- if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags)) break;
+ for (id = 0; id < FF_EFFECTS_MAX; ++id)
+ if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags))
+ break;
- if ( id == FF_EFFECTS_MAX || id >= iforce->dev.ff_effects_max)
+ if (id == FF_EFFECTS_MAX || id >= iforce->dev->ff_effects_max)
return -ENOMEM;
effect->id = id;
iforce->core_effects[id].owner = current->pid;
- iforce->core_effects[id].flags[0] = (1<<FF_CORE_IS_USED); /* Only IS_USED bit must be set */
+ iforce->core_effects[id].flags[0] = (1 << FF_CORE_IS_USED); /* Only IS_USED bit must be set */
is_update = FALSE;
}
else {
/* We want to update an effect */
- if (!CHECK_OWNERSHIP(effect->id, iforce)) return -EACCES;
+ if (!CHECK_OWNERSHIP(effect->id, iforce))
+ return -EACCES;
/* Parameter type cannot be updated */
if (effect->type != iforce->core_effects[effect->id].effect.type)
return -EINVAL;
/* Check the effect is not already being updated */
- if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags)) {
+ if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags))
return -EAGAIN;
- }
is_update = TRUE;
}
@@ -339,15 +340,19 @@
int iforce_init_device(struct iforce *iforce)
{
+ struct input_dev *input_dev;
unsigned char c[] = "CEOV";
int i;
+ input_dev = input_allocate_device();
+ if (input_dev)
+ return -ENOMEM;
+
init_waitqueue_head(&iforce->wait);
spin_lock_init(&iforce->xmit_lock);
init_MUTEX(&iforce->mem_mutex);
iforce->xmit.buf = iforce->xmit_data;
-
- iforce->dev.ff_effects_max = 10;
+ iforce->dev = input_dev;
/*
* Input device fields.
@@ -356,26 +361,27 @@
switch (iforce->bus) {
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
- iforce->dev.id.bustype = BUS_USB;
- iforce->dev.dev = &iforce->usbdev->dev;
+ input_dev->id.bustype = BUS_USB;
+ input_dev->cdev.dev = &iforce->usbdev->dev;
break;
#endif
#ifdef CONFIG_JOYSTICK_IFORCE_232
case IFORCE_232:
- iforce->dev.id.bustype = BUS_RS232;
- iforce->dev.dev = &iforce->serio->dev;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->cdev.dev = &iforce->serio->dev;
break;
#endif
}
- iforce->dev.private = iforce;
- iforce->dev.name = "Unknown I-Force device";
- iforce->dev.open = iforce_open;
- iforce->dev.close = iforce_release;
- iforce->dev.flush = iforce_flush;
- iforce->dev.event = iforce_input_event;
- iforce->dev.upload_effect = iforce_upload_effect;
- iforce->dev.erase_effect = iforce_erase_effect;
+ input_dev->private = iforce;
+ input_dev->name = "Unknown I-Force device";
+ input_dev->open = iforce_open;
+ input_dev->close = iforce_release;
+ input_dev->flush = iforce_flush;
+ input_dev->event = iforce_input_event;
+ input_dev->upload_effect = iforce_upload_effect;
+ input_dev->erase_effect = iforce_erase_effect;
+ input_dev->ff_effects_max = 10;
/*
* On-device memory allocation.
@@ -399,7 +405,8 @@
if (i == 20) { /* 5 seconds */
printk(KERN_ERR "iforce-main.c: Timeout waiting for response from device.\n");
- return -1;
+ input_free_device(input_dev);
+ return -ENODEV;
}
/*
@@ -407,12 +414,12 @@
*/
if (!iforce_get_id_packet(iforce, "M"))
- iforce->dev.id.vendor = (iforce->edata[2] << 8) | iforce->edata[1];
+ input_dev->id.vendor = (iforce->edata[2] << 8) | iforce->edata[1];
else
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet M\n");
if (!iforce_get_id_packet(iforce, "P"))
- iforce->dev.id.product = (iforce->edata[2] << 8) | iforce->edata[1];
+ input_dev->id.product = (iforce->edata[2] << 8) | iforce->edata[1];
else
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet P\n");
@@ -422,15 +429,15 @@
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet B\n");
if (!iforce_get_id_packet(iforce, "N"))
- iforce->dev.ff_effects_max = iforce->edata[1];
+ iforce->dev->ff_effects_max = iforce->edata[1];
else
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet N\n");
/* Check if the device can store more effects than the driver can really handle */
- if (iforce->dev.ff_effects_max > FF_EFFECTS_MAX) {
+ if (iforce->dev->ff_effects_max > FF_EFFECTS_MAX) {
printk(KERN_WARNING "input??: Device can handle %d effects, but N_EFFECTS_MAX is set to %d in iforce.h\n",
- iforce->dev.ff_effects_max, FF_EFFECTS_MAX);
- iforce->dev.ff_effects_max = FF_EFFECTS_MAX;
+ iforce->dev->ff_effects_max, FF_EFFECTS_MAX);
+ iforce->dev->ff_effects_max = FF_EFFECTS_MAX;
}
/*
@@ -453,29 +460,28 @@
*/
for (i = 0; iforce_device[i].idvendor; i++)
- if (iforce_device[i].idvendor == iforce->dev.id.vendor &&
- iforce_device[i].idproduct == iforce->dev.id.product)
+ if (iforce_device[i].idvendor == input_dev->id.vendor &&
+ iforce_device[i].idproduct == input_dev->id.product)
break;
iforce->type = iforce_device + i;
- iforce->dev.name = iforce->type->name;
+ input_dev->name = iforce->type->name;
/*
* Set input device bitfields and ranges.
*/
- iforce->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS);
for (i = 0; iforce->type->btn[i] >= 0; i++) {
signed short t = iforce->type->btn[i];
- set_bit(t, iforce->dev.keybit);
+ set_bit(t, input_dev->keybit);
}
- set_bit(BTN_DEAD, iforce->dev.keybit);
+ set_bit(BTN_DEAD, input_dev->keybit);
for (i = 0; iforce->type->abs[i] >= 0; i++) {
signed short t = iforce->type->abs[i];
- set_bit(t, iforce->dev.absbit);
switch (t) {
@@ -483,52 +489,42 @@
case ABS_Y:
case ABS_WHEEL:
- iforce->dev.absmax[t] = 1920;
- iforce->dev.absmin[t] = -1920;
- iforce->dev.absflat[t] = 128;
- iforce->dev.absfuzz[t] = 16;
-
- set_bit(t, iforce->dev.ffbit);
+ input_set_abs_params(input_dev, t, -1920, 1920, 16, 128);
+ set_bit(t, input_dev->ffbit);
break;
case ABS_THROTTLE:
case ABS_GAS:
case ABS_BRAKE:
- iforce->dev.absmax[t] = 255;
- iforce->dev.absmin[t] = 0;
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
break;
case ABS_RUDDER:
- iforce->dev.absmax[t] = 127;
- iforce->dev.absmin[t] = -128;
+ input_set_abs_params(input_dev, t, -128, 127, 0, 0);
break;
case ABS_HAT0X:
case ABS_HAT0Y:
case ABS_HAT1X:
case ABS_HAT1Y:
- iforce->dev.absmax[t] = 1;
- iforce->dev.absmin[t] = -1;
+
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
break;
}
}
for (i = 0; iforce->type->ff[i] >= 0; i++)
- set_bit(iforce->type->ff[i], iforce->dev.ffbit);
+ set_bit(iforce->type->ff[i], input_dev->ffbit);
/*
* Register input device.
*/
- input_register_device(&iforce->dev);
+ input_register_device(iforce->dev);
- printk(KERN_DEBUG "iforce->dev.open = %p\n", iforce->dev.open);
-
- printk(KERN_INFO "input: %s [%d effects, %ld bytes memory]\n",
- iforce->dev.name, iforce->dev.ff_effects_max,
- iforce->device_memory.end);
+ printk(KERN_DEBUG "iforce->dev->open = %p\n", iforce->dev->open);
return 0;
}
diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c
index e5a31e5..4a26292 100644
--- a/drivers/input/joystick/iforce/iforce-packets.c
+++ b/drivers/input/joystick/iforce/iforce-packets.c
@@ -139,7 +139,8 @@
static int mark_core_as_ready(struct iforce *iforce, unsigned short addr)
{
int i;
- for (i=0; i<iforce->dev.ff_effects_max; ++i) {
+
+ for (i = 0; i < iforce->dev->ff_effects_max; ++i) {
if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags) &&
(iforce->core_effects[i].mod1_chunk.start == addr ||
iforce->core_effects[i].mod2_chunk.start == addr)) {
@@ -153,7 +154,7 @@
void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data, struct pt_regs *regs)
{
- struct input_dev *dev = &iforce->dev;
+ struct input_dev *dev = iforce->dev;
int i;
static int being_used = 0;
diff --git a/drivers/input/joystick/iforce/iforce-serio.c b/drivers/input/joystick/iforce/iforce-serio.c
index 11f5190..64a78c5 100644
--- a/drivers/input/joystick/iforce/iforce-serio.c
+++ b/drivers/input/joystick/iforce/iforce-serio.c
@@ -131,11 +131,10 @@
struct iforce *iforce;
int err;
- if (!(iforce = kmalloc(sizeof(struct iforce), GFP_KERNEL)))
+ iforce = kzalloc(sizeof(struct iforce), GFP_KERNEL);
+ if (!iforce)
return -ENOMEM;
- memset(iforce, 0, sizeof(struct iforce));
-
iforce->bus = IFORCE_232;
iforce->serio = serio;
@@ -148,7 +147,8 @@
return err;
}
- if (iforce_init_device(iforce)) {
+ err = iforce_init_device(iforce);
+ if (err) {
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(iforce);
@@ -162,7 +162,7 @@
{
struct iforce *iforce = serio_get_drvdata(serio);
- input_unregister_device(&iforce->dev);
+ input_unregister_device(iforce->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(iforce);
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index 58600f9..64b4a30 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -135,28 +135,24 @@
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *epirq, *epout;
struct iforce *iforce;
+ int err = -ENOMEM;
interface = intf->cur_altsetting;
epirq = &interface->endpoint[0].desc;
epout = &interface->endpoint[1].desc;
- if (!(iforce = kmalloc(sizeof(struct iforce) + 32, GFP_KERNEL)))
+ if (!(iforce = kzalloc(sizeof(struct iforce) + 32, GFP_KERNEL)))
goto fail;
- memset(iforce, 0, sizeof(struct iforce));
-
- if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL))) {
+ if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
- }
- if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL))) {
+ if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
- }
- if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL))) {
+ if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
- }
iforce->bus = IFORCE_USB;
iforce->usbdev = dev;
@@ -174,7 +170,9 @@
usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0),
(void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce);
- if (iforce_init_device(iforce)) goto fail;
+ err = iforce_init_device(iforce);
+ if (err)
+ goto fail;
usb_set_intfdata(intf, iforce);
return 0;
@@ -187,7 +185,7 @@
kfree(iforce);
}
- return -ENODEV;
+ return err;
}
/* Called by iforce_delete() */
@@ -211,7 +209,7 @@
usb_set_intfdata(intf, NULL);
if (iforce) {
iforce->usbdev = NULL;
- input_unregister_device(&iforce->dev);
+ input_unregister_device(iforce->dev);
if (!open) {
iforce_delete_device(iforce);
diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h
index bce247b..146f406 100644
--- a/drivers/input/joystick/iforce/iforce.h
+++ b/drivers/input/joystick/iforce/iforce.h
@@ -117,7 +117,7 @@
};
struct iforce {
- struct input_dev dev; /* Input device interface */
+ struct input_dev *dev; /* Input device interface */
struct iforce_device *type;
int bus;
diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c
index d7b3472..c4ed017 100644
--- a/drivers/input/joystick/interact.c
+++ b/drivers/input/joystick/interact.c
@@ -38,6 +38,7 @@
#include <linux/init.h>
#include <linux/gameport.h>
#include <linux/input.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "InterAct digital joystick driver"
@@ -54,7 +55,7 @@
struct interact {
struct gameport *gameport;
- struct input_dev dev;
+ struct input_dev *dev;
int bads;
int reads;
unsigned char type;
@@ -130,7 +131,7 @@
static void interact_poll(struct gameport *gameport)
{
struct interact *interact = gameport_get_drvdata(gameport);
- struct input_dev *dev = &interact->dev;
+ struct input_dev *dev = interact->dev;
u32 data[3];
int i;
@@ -208,14 +209,20 @@
static int interact_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct interact *interact;
+ struct input_dev *input_dev;
__u32 data[3];
int i, t;
int err;
- if (!(interact = kzalloc(sizeof(struct interact), GFP_KERNEL)))
- return -ENOMEM;
+ interact = kzalloc(sizeof(struct interact), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!interact || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
interact->gameport = gameport;
+ interact->dev = input_dev;
gameport_set_drvdata(gameport, interact);
@@ -249,41 +256,40 @@
interact->type = i;
interact->length = interact_type[i].length;
- interact->dev.private = interact;
- interact->dev.open = interact_open;
- interact->dev.close = interact_close;
+ input_dev->name = interact_type[i].name;
+ input_dev->phys = interact->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_INTERACT;
+ input_dev->id.product = interact_type[i].id;
+ input_dev->id.version = 0x0100;
+ input_dev->private = interact;
- interact->dev.name = interact_type[i].name;
- interact->dev.phys = interact->phys;
- interact->dev.id.bustype = BUS_GAMEPORT;
- interact->dev.id.vendor = GAMEPORT_ID_VENDOR_INTERACT;
- interact->dev.id.product = interact_type[i].id;
- interact->dev.id.version = 0x0100;
+ input_dev->open = interact_open;
+ input_dev->close = interact_close;
- interact->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) {
- set_bit(t, interact->dev.absbit);
+ set_bit(t, input_dev->absbit);
if (i < interact_type[interact->type].b8) {
- interact->dev.absmin[t] = 0;
- interact->dev.absmax[t] = 255;
+ input_dev->absmin[t] = 0;
+ input_dev->absmax[t] = 255;
} else {
- interact->dev.absmin[t] = -1;
- interact->dev.absmax[t] = 1;
+ input_dev->absmin[t] = -1;
+ input_dev->absmax[t] = 1;
}
}
for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++)
- set_bit(t, interact->dev.keybit);
+ set_bit(t, input_dev->keybit);
- input_register_device(&interact->dev);
- printk(KERN_INFO "input: %s on %s\n",
- interact_type[interact->type].name, gameport->phys);
+ input_register_device(interact->dev);
return 0;
fail2: gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
+ input_free_device(input_dev);
kfree(interact);
return err;
}
@@ -292,7 +298,7 @@
{
struct interact *interact = gameport_get_drvdata(gameport);
- input_unregister_device(&interact->dev);
+ input_unregister_device(interact->dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(interact);
diff --git a/drivers/input/joystick/joydump.c b/drivers/input/joystick/joydump.c
index 4234cca..88ec5a91 100644
--- a/drivers/input/joystick/joydump.c
+++ b/drivers/input/joystick/joydump.c
@@ -34,6 +34,7 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/slab.h>
#define DRIVER_DESC "Gameport data dumper module"
diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c
index 1ba5036..ca3cc23 100644
--- a/drivers/input/joystick/magellan.c
+++ b/drivers/input/joystick/magellan.c
@@ -49,14 +49,13 @@
static int magellan_buttons[] = { BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 };
static int magellan_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ };
-static char *magellan_name = "LogiCad3D Magellan / SpaceMouse";
/*
* Per-Magellan data.
*/
struct magellan {
- struct input_dev dev;
+ struct input_dev *dev;
int idx;
unsigned char data[MAGELLAN_MAX_LENGTH];
char phys[32];
@@ -85,7 +84,7 @@
static void magellan_process_packet(struct magellan* magellan, struct pt_regs *regs)
{
- struct input_dev *dev = &magellan->dev;
+ struct input_dev *dev = magellan->dev;
unsigned char *data = magellan->data;
int i, t;
@@ -138,9 +137,9 @@
{
struct magellan* magellan = serio_get_drvdata(serio);
- input_unregister_device(&magellan->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(magellan->dev);
kfree(magellan);
}
@@ -153,52 +152,48 @@
static int magellan_connect(struct serio *serio, struct serio_driver *drv)
{
struct magellan *magellan;
- int i, t;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+ int i;
- if (!(magellan = kmalloc(sizeof(struct magellan), GFP_KERNEL)))
- return -ENOMEM;
+ magellan = kzalloc(sizeof(struct magellan), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!magellan || !input_dev)
+ goto fail;
- memset(magellan, 0, sizeof(struct magellan));
-
- magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (i = 0; i < 9; i++)
- set_bit(magellan_buttons[i], magellan->dev.keybit);
-
- for (i = 0; i < 6; i++) {
- t = magellan_axes[i];
- set_bit(t, magellan->dev.absbit);
- magellan->dev.absmin[t] = -360;
- magellan->dev.absmax[t] = 360;
- }
-
+ magellan->dev = input_dev;
sprintf(magellan->phys, "%s/input0", serio->phys);
- init_input_dev(&magellan->dev);
- magellan->dev.private = magellan;
- magellan->dev.name = magellan_name;
- magellan->dev.phys = magellan->phys;
- magellan->dev.id.bustype = BUS_RS232;
- magellan->dev.id.vendor = SERIO_MAGELLAN;
- magellan->dev.id.product = 0x0001;
- magellan->dev.id.version = 0x0100;
- magellan->dev.dev = &serio->dev;
+ input_dev->name = "LogiCad3D Magellan / SpaceMouse";
+ input_dev->phys = magellan->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_MAGELLAN;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = magellan;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; i < 9; i++)
+ set_bit(magellan_buttons[i], input_dev->keybit);
+
+ for (i = 0; i < 6; i++)
+ input_set_abs_params(input_dev, magellan_axes[i], -360, 360, 0, 0);
serio_set_drvdata(serio, magellan);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(magellan);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&magellan->dev);
-
- printk(KERN_INFO "input: %s on %s\n", magellan_name, serio->phys);
-
+ input_register_device(magellan->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(magellan);
+ return err;
}
/*
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index 9e03537..78dd163 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -33,6 +33,7 @@
#include <linux/init.h>
#include <linux/input.h>
#include <linux/gameport.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "Microsoft SideWinder joystick family driver"
@@ -113,7 +114,7 @@
struct sw {
struct gameport *gameport;
- struct input_dev dev[4];
+ struct input_dev *dev[4];
char name[64];
char phys[4][32];
int length;
@@ -301,7 +302,7 @@
static int sw_parse(unsigned char *buf, struct sw *sw)
{
int hat, i, j;
- struct input_dev *dev = sw->dev;
+ struct input_dev *dev;
switch (sw->type) {
@@ -310,6 +311,8 @@
if (sw_check(GB(0,64)) || (hat = (GB(6,1) << 3) | GB(60,3)) > 8)
return -1;
+ dev = sw->dev[0];
+
input_report_abs(dev, ABS_X, (GB( 3,3) << 7) | GB(16,7));
input_report_abs(dev, ABS_Y, (GB( 0,3) << 7) | GB(24,7));
input_report_abs(dev, ABS_RZ, (GB(35,2) << 7) | GB(40,7));
@@ -335,13 +338,13 @@
if (sw_parity(GB(i*15,15)))
return -1;
- input_report_abs(dev + i, ABS_X, GB(i*15+3,1) - GB(i*15+2,1));
- input_report_abs(dev + i, ABS_Y, GB(i*15+0,1) - GB(i*15+1,1));
+ input_report_abs(sw->dev[i], ABS_X, GB(i*15+3,1) - GB(i*15+2,1));
+ input_report_abs(sw->dev[i], ABS_Y, GB(i*15+0,1) - GB(i*15+1,1));
for (j = 0; j < 10; j++)
- input_report_key(dev + i, sw_btn[SW_ID_GP][j], !GB(i*15+j+4,1));
+ input_report_key(sw->dev[i], sw_btn[SW_ID_GP][j], !GB(i*15+j+4,1));
- input_sync(dev + i);
+ input_sync(sw->dev[i]);
}
return 0;
@@ -352,6 +355,7 @@
if (!sw_parity(GB(0,48)) || (hat = GB(42,4)) > 8)
return -1;
+ dev = sw->dev[0];
input_report_abs(dev, ABS_X, GB( 9,10));
input_report_abs(dev, ABS_Y, GB(19,10));
input_report_abs(dev, ABS_RZ, GB(36, 6));
@@ -372,6 +376,7 @@
if (!sw_parity(GB(0,43)) || (hat = GB(28,4)) > 8)
return -1;
+ dev = sw->dev[0];
input_report_abs(dev, ABS_X, GB( 0,10));
input_report_abs(dev, ABS_Y, GB(16,10));
input_report_abs(dev, ABS_THROTTLE, GB(32, 6));
@@ -396,6 +401,7 @@
if (!sw_parity(GB(0,33)))
return -1;
+ dev = sw->dev[0];
input_report_abs(dev, ABS_RX, GB( 0,10));
input_report_abs(dev, ABS_RUDDER, GB(10, 6));
input_report_abs(dev, ABS_THROTTLE, GB(16, 6));
@@ -581,6 +587,7 @@
static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct sw *sw;
+ struct input_dev *input_dev;
int i, j, k, l;
int err;
unsigned char *buf = NULL; /* [SW_LENGTH] */
@@ -729,42 +736,50 @@
sprintf(sw->name, "Microsoft SideWinder %s", sw_name[sw->type]);
sprintf(sw->phys[i], "%s/input%d", gameport->phys, i);
- sw->dev[i].private = sw;
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ err = -ENOMEM;
+ goto fail3;
+ }
- sw->dev[i].open = sw_open;
- sw->dev[i].close = sw_close;
+ input_dev->name = sw->name;
+ input_dev->phys = sw->phys[i];
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT;
+ input_dev->id.product = sw->type;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = sw;
- sw->dev[i].name = sw->name;
- sw->dev[i].phys = sw->phys[i];
- sw->dev[i].id.bustype = BUS_GAMEPORT;
- sw->dev[i].id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT;
- sw->dev[i].id.product = sw->type;
- sw->dev[i].id.version = 0x0100;
+ input_dev->open = sw_open;
+ input_dev->close = sw_close;
- sw->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (j = 0; (bits = sw_bit[sw->type][j]); j++) {
code = sw_abs[sw->type][j];
- set_bit(code, sw->dev[i].absbit);
- sw->dev[i].absmax[code] = (1 << bits) - 1;
- sw->dev[i].absmin[code] = (bits == 1) ? -1 : 0;
- sw->dev[i].absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0;
+ set_bit(code, input_dev->absbit);
+ input_dev->absmax[code] = (1 << bits) - 1;
+ input_dev->absmin[code] = (bits == 1) ? -1 : 0;
+ input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0;
if (code != ABS_THROTTLE)
- sw->dev[i].absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0;
+ input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0;
}
for (j = 0; (code = sw_btn[sw->type][j]); j++)
- set_bit(code, sw->dev[i].keybit);
+ set_bit(code, input_dev->keybit);
- input_register_device(sw->dev + i);
- printk(KERN_INFO "input: %s%s on %s [%d-bit id %d data %d]\n",
- sw->name, comment, gameport->phys, m, l, k);
+ dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k);
+
+ input_register_device(sw->dev[i]);
}
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: while (--i >= 0)
+ input_unregister_device(sw->dev[i]);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
kfree(sw);
kfree(buf);
kfree(idbuf);
@@ -777,7 +792,7 @@
int i;
for (i = 0; i < sw->number; i++)
- input_unregister_device(sw->dev + i);
+ input_unregister_device(sw->dev[i]);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(sw);
diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c
index a436f22..d6f8db8 100644
--- a/drivers/input/joystick/spaceball.c
+++ b/drivers/input/joystick/spaceball.c
@@ -70,8 +70,7 @@
*/
struct spaceball {
- struct input_dev dev;
- struct serio *serio;
+ struct input_dev *dev;
int idx;
int escape;
unsigned char data[SPACEBALL_MAX_LENGTH];
@@ -85,7 +84,7 @@
static void spaceball_process_packet(struct spaceball* spaceball, struct pt_regs *regs)
{
- struct input_dev *dev = &spaceball->dev;
+ struct input_dev *dev = spaceball->dev;
unsigned char *data = spaceball->data;
int i;
@@ -193,9 +192,9 @@
{
struct spaceball* spaceball = serio_get_drvdata(serio);
- input_unregister_device(&spaceball->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(spaceball->dev);
kfree(spaceball);
}
@@ -208,69 +207,62 @@
static int spaceball_connect(struct serio *serio, struct serio_driver *drv)
{
struct spaceball *spaceball;
- int i, t, id;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+ int i, id;
if ((id = serio->id.id) > SPACEBALL_MAX_ID)
return -ENODEV;
- if (!(spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL)))
- return - ENOMEM;
+ spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!spaceball || !input_dev)
+ goto fail;
- memset(spaceball, 0, sizeof(struct spaceball));
+ spaceball->dev = input_dev;
+ sprintf(spaceball->phys, "%s/input0", serio->phys);
- spaceball->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->name = spaceball_names[id];
+ input_dev->phys = spaceball->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_SPACEBALL;
+ input_dev->id.product = id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = spaceball;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
switch (id) {
case SPACEBALL_4000FLX:
case SPACEBALL_4000FLX_L:
- spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_9);
- spaceball->dev.keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE);
+ input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_9);
+ input_dev->keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE);
default:
- spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4)
+ input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4)
| BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7) | BIT(BTN_8);
case SPACEBALL_3003C:
- spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8);
+ input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8);
}
- for (i = 0; i < 6; i++) {
- t = spaceball_axes[i];
- set_bit(t, spaceball->dev.absbit);
- spaceball->dev.absmin[t] = i < 3 ? -8000 : -1600;
- spaceball->dev.absmax[t] = i < 3 ? 8000 : 1600;
- spaceball->dev.absflat[t] = i < 3 ? 40 : 8;
- spaceball->dev.absfuzz[t] = i < 3 ? 8 : 2;
+ for (i = 0; i < 3; i++) {
+ input_set_abs_params(input_dev, ABS_X + i, -8000, 8000, 8, 40);
+ input_set_abs_params(input_dev, ABS_RX + i, -1600, 1600, 2, 8);
}
- spaceball->serio = serio;
- spaceball->dev.private = spaceball;
-
- sprintf(spaceball->phys, "%s/input0", serio->phys);
-
- init_input_dev(&spaceball->dev);
- spaceball->dev.name = spaceball_names[id];
- spaceball->dev.phys = spaceball->phys;
- spaceball->dev.id.bustype = BUS_RS232;
- spaceball->dev.id.vendor = SERIO_SPACEBALL;
- spaceball->dev.id.product = id;
- spaceball->dev.id.version = 0x0100;
- spaceball->dev.dev = &serio->dev;
-
serio_set_drvdata(serio, spaceball);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(spaceball);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&spaceball->dev);
-
- printk(KERN_INFO "input: %s on serio%s\n",
- spaceball_names[id], serio->phys);
-
+ input_register_device(spaceball->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(spaceball);
+ return err;
}
/*
diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c
index 01fd2e4..7c123a0 100644
--- a/drivers/input/joystick/spaceorb.c
+++ b/drivers/input/joystick/spaceorb.c
@@ -52,15 +52,13 @@
static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A };
static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ };
-static char *spaceorb_name = "SpaceTec SpaceOrb 360 / Avenger";
/*
* Per-Orb data.
*/
struct spaceorb {
- struct input_dev dev;
- struct serio *serio;
+ struct input_dev *dev;
int idx;
unsigned char data[SPACEORB_MAX_LENGTH];
char phys[32];
@@ -78,7 +76,7 @@
static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *regs)
{
- struct input_dev *dev = &spaceorb->dev;
+ struct input_dev *dev = spaceorb->dev;
unsigned char *data = spaceorb->data;
unsigned char c = 0;
int axes[6];
@@ -95,8 +93,8 @@
case 'R': /* Reset packet */
spaceorb->data[spaceorb->idx - 1] = 0;
for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++);
- printk(KERN_INFO "input: %s [%s] on %s\n",
- spaceorb_name, spaceorb->data + i, spaceorb->serio->phys);
+ printk(KERN_INFO "input: %s [%s] is %s\n",
+ dev->name, spaceorb->data + i, spaceorb->phys);
break;
case 'D': /* Ball + button data */
@@ -123,7 +121,7 @@
case 'E': /* Error packet */
if (spaceorb->idx != 4) return;
- printk(KERN_ERR "joy-spaceorb: Device error. [ ");
+ printk(KERN_ERR "spaceorb: Device error. [ ");
for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]);
printk("]\n");
break;
@@ -154,9 +152,9 @@
{
struct spaceorb* spaceorb = serio_get_drvdata(serio);
- input_unregister_device(&spaceorb->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(spaceorb->dev);
kfree(spaceorb);
}
@@ -169,52 +167,48 @@
static int spaceorb_connect(struct serio *serio, struct serio_driver *drv)
{
struct spaceorb *spaceorb;
- int i, t;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+ int i;
- if (!(spaceorb = kmalloc(sizeof(struct spaceorb), GFP_KERNEL)))
- return -ENOMEM;
+ spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!spaceorb || !input_dev)
+ goto fail;
- memset(spaceorb, 0, sizeof(struct spaceorb));
-
- spaceorb->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (i = 0; i < 6; i++)
- set_bit(spaceorb_buttons[i], spaceorb->dev.keybit);
-
- for (i = 0; i < 6; i++) {
- t = spaceorb_axes[i];
- set_bit(t, spaceorb->dev.absbit);
- spaceorb->dev.absmin[t] = -508;
- spaceorb->dev.absmax[t] = 508;
- }
-
- spaceorb->serio = serio;
- spaceorb->dev.private = spaceorb;
-
+ spaceorb->dev = input_dev;
sprintf(spaceorb->phys, "%s/input0", serio->phys);
- init_input_dev(&spaceorb->dev);
- spaceorb->dev.name = spaceorb_name;
- spaceorb->dev.phys = spaceorb->phys;
- spaceorb->dev.id.bustype = BUS_RS232;
- spaceorb->dev.id.vendor = SERIO_SPACEORB;
- spaceorb->dev.id.product = 0x0001;
- spaceorb->dev.id.version = 0x0100;
- spaceorb->dev.dev = &serio->dev;
+ input_dev->name = "SpaceTec SpaceOrb 360 / Avenger";
+ input_dev->phys = spaceorb->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_SPACEORB;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = spaceorb;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; i < 6; i++)
+ set_bit(spaceorb_buttons[i], input_dev->keybit);
+
+ for (i = 0; i < 6; i++)
+ input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0);
serio_set_drvdata(serio, spaceorb);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(spaceorb);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&spaceorb->dev);
-
+ input_register_device(spaceorb->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(spaceorb);
+ return err;
}
/*
diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c
index 6f6e675..0a9ed1d 100644
--- a/drivers/input/joystick/stinger.c
+++ b/drivers/input/joystick/stinger.c
@@ -48,14 +48,12 @@
#define STINGER_MAX_LENGTH 8
-static char *stinger_name = "Gravis Stinger";
-
/*
* Per-Stinger data.
*/
struct stinger {
- struct input_dev dev;
+ struct input_dev *dev;
int idx;
unsigned char data[STINGER_MAX_LENGTH];
char phys[32];
@@ -68,7 +66,7 @@
static void stinger_process_packet(struct stinger *stinger, struct pt_regs *regs)
{
- struct input_dev *dev = &stinger->dev;
+ struct input_dev *dev = stinger->dev;
unsigned char *data = stinger->data;
if (!stinger->idx) return;
@@ -126,9 +124,9 @@
{
struct stinger *stinger = serio_get_drvdata(serio);
- input_unregister_device(&stinger->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(stinger->dev);
kfree(stinger);
}
@@ -141,53 +139,46 @@
static int stinger_connect(struct serio *serio, struct serio_driver *drv)
{
struct stinger *stinger;
- int i;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- if (!(stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL)))
- return -ENOMEM;
+ stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!stinger || !input_dev)
+ goto fail;
- memset(stinger, 0, sizeof(struct stinger));
-
- stinger->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- stinger->dev.keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) | \
- BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) | \
- BIT(BTN_START) | BIT(BTN_SELECT);
- stinger->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
-
+ stinger->dev = input_dev;
sprintf(stinger->phys, "%s/serio0", serio->phys);
- init_input_dev(&stinger->dev);
- stinger->dev.name = stinger_name;
- stinger->dev.phys = stinger->phys;
- stinger->dev.id.bustype = BUS_RS232;
- stinger->dev.id.vendor = SERIO_STINGER;
- stinger->dev.id.product = 0x0001;
- stinger->dev.id.version = 0x0100;
- stinger->dev.dev = &serio->dev;
+ input_dev->name = "Gravis Stinger";
+ input_dev->phys = stinger->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_STINGER;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = stinger;
- for (i = 0; i < 2; i++) {
- stinger->dev.absmax[ABS_X+i] = 64;
- stinger->dev.absmin[ABS_X+i] = -64;
- stinger->dev.absflat[ABS_X+i] = 4;
- }
-
- stinger->dev.private = stinger;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) |
+ BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) |
+ BIT(BTN_START) | BIT(BTN_SELECT);
+ input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 4);
+ input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 4);
serio_set_drvdata(serio, stinger);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(stinger);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&stinger->dev);
-
- printk(KERN_INFO "input: %s on %s\n", stinger_name, serio->phys);
-
+ input_register_device(stinger->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(stinger);
+ return err;
}
/*
diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c
index 7431efc..60e2aac 100644
--- a/drivers/input/joystick/tmdc.c
+++ b/drivers/input/joystick/tmdc.c
@@ -38,6 +38,7 @@
#include <linux/init.h>
#include <linux/gameport.h>
#include <linux/input.h>
+#include <linux/jiffies.h>
#define DRIVER_DESC "ThrustMaster DirectConnect joystick driver"
@@ -63,37 +64,70 @@
#define TMDC_ABS_HAT 4
#define TMDC_BTN 16
-static unsigned char tmdc_byte_a[16] = { 0, 1, 3, 4, 6, 7 };
-static unsigned char tmdc_byte_d[16] = { 2, 5, 8, 9 };
+static const unsigned char tmdc_byte_a[16] = { 0, 1, 3, 4, 6, 7 };
+static const unsigned char tmdc_byte_d[16] = { 2, 5, 8, 9 };
-static signed char tmdc_abs[TMDC_ABS] =
+static const signed char tmdc_abs[TMDC_ABS] =
{ ABS_X, ABS_Y, ABS_RUDDER, ABS_THROTTLE, ABS_RX, ABS_RY, ABS_RZ };
-static signed char tmdc_abs_hat[TMDC_ABS_HAT] =
+static const signed char tmdc_abs_hat[TMDC_ABS_HAT] =
{ ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y };
-static signed char tmdc_abs_at[TMDC_ABS] =
+static const signed char tmdc_abs_at[TMDC_ABS] =
{ ABS_X, ABS_Y, ABS_RUDDER, -1, ABS_THROTTLE };
-static signed char tmdc_abs_fm[TMDC_ABS] =
+static const signed char tmdc_abs_fm[TMDC_ABS] =
{ ABS_RX, ABS_RY, ABS_X, ABS_Y };
-static short tmdc_btn_pad[TMDC_BTN] =
+static const short tmdc_btn_pad[TMDC_BTN] =
{ BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_START, BTN_SELECT, BTN_TL, BTN_TR };
-static short tmdc_btn_joy[TMDC_BTN] =
+static const short tmdc_btn_joy[TMDC_BTN] =
{ BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN_BASE, BTN_BASE2, BTN_THUMB2, BTN_PINKIE,
BTN_BASE3, BTN_BASE4, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z };
-static short tmdc_btn_fm[TMDC_BTN] =
+static const short tmdc_btn_fm[TMDC_BTN] =
{ BTN_TRIGGER, BTN_C, BTN_B, BTN_A, BTN_THUMB, BTN_X, BTN_Y, BTN_Z, BTN_TOP, BTN_TOP2 };
-static short tmdc_btn_at[TMDC_BTN] =
+static const short tmdc_btn_at[TMDC_BTN] =
{ BTN_TRIGGER, BTN_THUMB2, BTN_PINKIE, BTN_THUMB, BTN_BASE6, BTN_BASE5, BTN_BASE4,
BTN_BASE3, BTN_BASE2, BTN_BASE };
-static struct {
+static const struct {
int x;
int y;
} tmdc_hat_to_axis[] = {{ 0, 0}, { 1, 0}, { 0,-1}, {-1, 0}, { 0, 1}};
+static const struct tmdc_model {
+ unsigned char id;
+ const char *name;
+ char abs;
+ char hats;
+ char btnc[4];
+ char btno[4];
+ const signed char *axes;
+ const short *buttons;
+} tmdc_models[] = {
+ { 1, "ThrustMaster Millenium 3D Inceptor", 6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy },
+ { 3, "ThrustMaster Rage 3D Gamepad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
+ { 4, "ThrustMaster Attack Throttle", 5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at },
+ { 8, "ThrustMaster FragMaster", 4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm },
+ { 163, "Thrustmaster Fusion GamePad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
+ { 0, "Unknown %d-axis, %d-button TM device %d", 0, 0, { 0, 0 }, { 0, 0 }, tmdc_abs, tmdc_btn_joy }
+};
+
+
+struct tmdc_port {
+ struct input_dev *dev;
+ char name[64];
+ char phys[32];
+ int mode;
+ const signed char *abs;
+ const short *btn;
+ unsigned char absc;
+ unsigned char btnc[4];
+ unsigned char btno[4];
+};
+
struct tmdc {
struct gameport *gameport;
- struct input_dev dev[2];
+ struct tmdc_port *port[2];
+#if 0
+ struct input_dev *dev[2];
char name[2][64];
char phys[2][32];
int mode[2];
@@ -102,6 +136,7 @@
unsigned char absc[2];
unsigned char btnc[2][4];
unsigned char btno[2][4];
+#endif
int reads;
int bads;
unsigned char exists;
@@ -156,6 +191,50 @@
return (i[0] == TMDC_MAX_LENGTH) | ((i[1] == TMDC_MAX_LENGTH) << 1);
}
+static int tmdc_parse_packet(struct tmdc_port *port, unsigned char *data)
+{
+ int i, k, l;
+
+ if (data[TMDC_BYTE_ID] != port->mode)
+ return -1;
+
+ for (i = 0; i < port->absc; i++) {
+ if (port->abs[i] < 0)
+ return 0;
+
+ input_report_abs(port->dev, port->abs[i], data[tmdc_byte_a[i]]);
+ }
+
+ switch (port->mode) {
+
+ case TMDC_MODE_M3DI:
+
+ i = tmdc_byte_d[0];
+ input_report_abs(port->dev, ABS_HAT0X, ((data[i] >> 3) & 1) - ((data[i] >> 1) & 1));
+ input_report_abs(port->dev, ABS_HAT0Y, ((data[i] >> 2) & 1) - ( data[i] & 1));
+ break;
+
+ case TMDC_MODE_AT:
+
+ i = tmdc_byte_a[3];
+ input_report_abs(port->dev, ABS_HAT0X, tmdc_hat_to_axis[(data[i] - 141) / 25].x);
+ input_report_abs(port->dev, ABS_HAT0Y, tmdc_hat_to_axis[(data[i] - 141) / 25].y);
+ break;
+
+ }
+
+ for (k = l = 0; k < 4; k++) {
+ for (i = 0; i < port->btnc[k]; i++)
+ input_report_key(port->dev, port->btn[i + l],
+ ((data[tmdc_byte_d[k]] >> (i + port->btno[k])) & 1));
+ l += port->btnc[k];
+ }
+
+ input_sync(port->dev);
+
+ return 0;
+}
+
/*
* tmdc_poll() reads and analyzes ThrustMaster joystick data.
*/
@@ -164,57 +243,21 @@
{
unsigned char data[2][TMDC_MAX_LENGTH];
struct tmdc *tmdc = gameport_get_drvdata(gameport);
- struct input_dev *dev;
unsigned char r, bad = 0;
- int i, j, k, l;
+ int i;
tmdc->reads++;
if ((r = tmdc_read_packet(tmdc->gameport, data)) != tmdc->exists)
bad = 1;
- else
+ else {
+ for (i = 0; i < 2; i++) {
+ if (r & (1 << i) & tmdc->exists) {
- for (j = 0; j < 2; j++)
- if (r & (1 << j) & tmdc->exists) {
-
- if (data[j][TMDC_BYTE_ID] != tmdc->mode[j]) {
- bad = 1;
- continue;
+ if (tmdc_parse_packet(tmdc->port[i], data[i]))
+ bad = 1;
}
-
- dev = tmdc->dev + j;
-
- for (i = 0; i < tmdc->absc[j]; i++) {
- if (tmdc->abs[j][i] < 0) continue;
- input_report_abs(dev, tmdc->abs[j][i], data[j][tmdc_byte_a[i]]);
- }
-
- switch (tmdc->mode[j]) {
-
- case TMDC_MODE_M3DI:
-
- i = tmdc_byte_d[0];
- input_report_abs(dev, ABS_HAT0X, ((data[j][i] >> 3) & 1) - ((data[j][i] >> 1) & 1));
- input_report_abs(dev, ABS_HAT0Y, ((data[j][i] >> 2) & 1) - ( data[j][i] & 1));
- break;
-
- case TMDC_MODE_AT:
-
- i = tmdc_byte_a[3];
- input_report_abs(dev, ABS_HAT0X, tmdc_hat_to_axis[(data[j][i] - 141) / 25].x);
- input_report_abs(dev, ABS_HAT0Y, tmdc_hat_to_axis[(data[j][i] - 141) / 25].y);
- break;
-
- }
-
- for (k = l = 0; k < 4; k++) {
- for (i = 0; i < tmdc->btnc[j][k]; i++)
- input_report_key(dev, tmdc->btn[j][i + l],
- ((data[j][tmdc_byte_d[k]] >> (i + tmdc->btno[j][k])) & 1));
- l += tmdc->btnc[j][k];
- }
-
- input_sync(dev);
+ }
}
tmdc->bads += bad;
@@ -235,31 +278,89 @@
gameport_stop_polling(tmdc->gameport);
}
+static int tmdc_setup_port(struct tmdc *tmdc, int idx, unsigned char *data)
+{
+ const struct tmdc_model *model;
+ struct tmdc_port *port;
+ struct input_dev *input_dev;
+ int i, j, b = 0;
+
+ tmdc->port[idx] = port = kzalloc(sizeof (struct tmdc_port), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!port || !input_dev) {
+ kfree(port);
+ input_free_device(input_dev);
+ return -ENOMEM;
+ }
+
+ port->mode = data[TMDC_BYTE_ID];
+
+ for (model = tmdc_models; model->id && model->id != port->mode; model++)
+ /* empty */;
+
+ port->abs = model->axes;
+ port->btn = model->buttons;
+
+ if (!model->id) {
+ port->absc = data[TMDC_BYTE_DEF] >> 4;
+ for (i = 0; i < 4; i++)
+ port->btnc[i] = i < (data[TMDC_BYTE_DEF] & 0xf) ? 8 : 0;
+ } else {
+ port->absc = model->abs;
+ for (i = 0; i < 4; i++)
+ port->btnc[i] = model->btnc[i];
+ }
+
+ for (i = 0; i < 4; i++)
+ port->btno[i] = model->btno[i];
+
+ snprintf(port->name, sizeof(port->name), model->name,
+ port->absc, (data[TMDC_BYTE_DEF] & 0xf) << 3, port->mode);
+ snprintf(port->phys, sizeof(port->phys), "%s/input%d", tmdc->gameport->phys, i);
+
+ port->dev = input_dev;
+
+ input_dev->name = port->name;
+ input_dev->phys = port->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER;
+ input_dev->id.product = model->id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &tmdc->gameport->dev;
+ input_dev->private = tmdc;
+
+ input_dev->open = tmdc_open;
+ input_dev->close = tmdc_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; i < port->absc && i < TMDC_ABS; i++)
+ if (port->abs[i] >= 0)
+ input_set_abs_params(input_dev, port->abs[i], 8, 248, 2, 4);
+
+ for (i = 0; i < model->hats && i < TMDC_ABS_HAT; i++)
+ input_set_abs_params(input_dev, tmdc_abs_hat[i], -1, 1, 0, 0);
+
+ for (i = 0; i < 4; i++) {
+ for (j = 0; j < port->btnc[i] && j < TMDC_BTN; j++)
+ set_bit(port->btn[j + b], input_dev->keybit);
+ b += port->btnc[i];
+ }
+
+ input_register_device(port->dev);
+
+ return 0;
+}
+
/*
* tmdc_probe() probes for ThrustMaster type joysticks.
*/
static int tmdc_connect(struct gameport *gameport, struct gameport_driver *drv)
{
- static struct models {
- unsigned char id;
- char *name;
- char abs;
- char hats;
- char btnc[4];
- char btno[4];
- signed char *axes;
- short *buttons;
- } models[] = { { 1, "ThrustMaster Millenium 3D Inceptor", 6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy },
- { 3, "ThrustMaster Rage 3D Gamepad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
- { 4, "ThrustMaster Attack Throttle", 5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at },
- { 8, "ThrustMaster FragMaster", 4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm },
- { 163, "Thrustmaster Fusion GamePad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
- { 0, "Unknown %d-axis, %d-button TM device %d", 0, 0, { 0, 0 }, { 0, 0 }, tmdc_abs, tmdc_btn_joy }};
-
unsigned char data[2][TMDC_MAX_LENGTH];
struct tmdc *tmdc;
- int i, j, k, l, m;
+ int i;
int err;
if (!(tmdc = kzalloc(sizeof(struct tmdc), GFP_KERNEL)))
@@ -281,68 +382,25 @@
gameport_set_poll_handler(gameport, tmdc_poll);
gameport_set_poll_interval(gameport, 20);
- for (j = 0; j < 2; j++)
- if (tmdc->exists & (1 << j)) {
+ for (i = 0; i < 2; i++) {
+ if (tmdc->exists & (1 << i)) {
- tmdc->mode[j] = data[j][TMDC_BYTE_ID];
-
- for (m = 0; models[m].id && models[m].id != tmdc->mode[j]; m++);
-
- tmdc->abs[j] = models[m].axes;
- tmdc->btn[j] = models[m].buttons;
-
- if (!models[m].id) {
- models[m].abs = data[j][TMDC_BYTE_DEF] >> 4;
- for (k = 0; k < 4; k++)
- models[m].btnc[k] = k < (data[j][TMDC_BYTE_DEF] & 0xf) ? 8 : 0;
- }
-
- tmdc->absc[j] = models[m].abs;
- for (k = 0; k < 4; k++) {
- tmdc->btnc[j][k] = models[m].btnc[k];
- tmdc->btno[j][k] = models[m].btno[k];
- }
-
- sprintf(tmdc->name[j], models[m].name, models[m].abs,
- (data[j][TMDC_BYTE_DEF] & 0xf) << 3, tmdc->mode[j]);
-
- sprintf(tmdc->phys[j], "%s/input%d", gameport->phys, j);
-
- tmdc->dev[j].private = tmdc;
- tmdc->dev[j].open = tmdc_open;
- tmdc->dev[j].close = tmdc_close;
-
- tmdc->dev[j].name = tmdc->name[j];
- tmdc->dev[j].phys = tmdc->phys[j];
- tmdc->dev[j].id.bustype = BUS_GAMEPORT;
- tmdc->dev[j].id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER;
- tmdc->dev[j].id.product = models[m].id;
- tmdc->dev[j].id.version = 0x0100;
-
- tmdc->dev[j].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (i = 0; i < models[m].abs && i < TMDC_ABS; i++)
- if (tmdc->abs[j][i] >= 0)
- input_set_abs_params(&tmdc->dev[j], tmdc->abs[j][i], 8, 248, 2, 4);
-
- for (i = 0; i < models[m].hats && i < TMDC_ABS_HAT; i++)
- input_set_abs_params(&tmdc->dev[j], tmdc_abs_hat[i], -1, 1, 0, 0);
-
-
- for (k = l = 0; k < 4; k++) {
- for (i = 0; i < models[m].btnc[k] && i < TMDC_BTN; i++)
- set_bit(tmdc->btn[j][i + l], tmdc->dev[j].keybit);
- l += models[m].btnc[k];
- }
-
- input_register_device(tmdc->dev + j);
- printk(KERN_INFO "input: %s on %s\n", tmdc->name[j], gameport->phys);
+ err = tmdc_setup_port(tmdc, i, data[i]);
+ if (err)
+ goto fail3;
}
+ }
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: while (--i >= 0) {
+ if (tmdc->port[i]) {
+ input_unregister_device(tmdc->port[i]->dev);
+ kfree(tmdc->port[i]);
+ }
+ }
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
kfree(tmdc);
return err;
}
@@ -352,9 +410,12 @@
struct tmdc *tmdc = gameport_get_drvdata(gameport);
int i;
- for (i = 0; i < 2; i++)
- if (tmdc->exists & (1 << i))
- input_unregister_device(tmdc->dev + i);
+ for (i = 0; i < 2; i++) {
+ if (tmdc->port[i]) {
+ input_unregister_device(tmdc->port[i]->dev);
+ kfree(tmdc->port[i]);
+ }
+ }
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(tmdc);
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index 0c5b9c8..7e97649 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -42,19 +42,21 @@
MODULE_DESCRIPTION("TurboGraFX parallel port interface driver");
MODULE_LICENSE("GPL");
-static int tgfx[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 };
-static int tgfx_nargs __initdata = 0;
-module_param_array_named(map, tgfx, int, &tgfx_nargs, 0);
+#define TGFX_MAX_PORTS 3
+#define TGFX_MAX_DEVICES 7
+
+struct tgfx_config {
+ int args[TGFX_MAX_DEVICES + 1];
+ int nargs;
+};
+
+static struct tgfx_config tgfx[TGFX_MAX_PORTS] __initdata;
+
+module_param_array_named(map, tgfx[0].args, int, &tgfx[0].nargs, 0);
MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<js1>,<js2>,..<js7>");
-
-static int tgfx_2[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 };
-static int tgfx_nargs_2 __initdata = 0;
-module_param_array_named(map2, tgfx_2, int, &tgfx_nargs_2, 0);
+module_param_array_named(map2, tgfx[1].args, int, &tgfx[1].nargs, 0);
MODULE_PARM_DESC(map2, "Describes second set of devices");
-
-static int tgfx_3[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 };
-static int tgfx_nargs_3 __initdata = 0;
-module_param_array_named(map3, tgfx_3, int, &tgfx_nargs_3, 0);
+module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0);
MODULE_PARM_DESC(map3, "Describes third set of devices");
__obsolete_setup("tgfx=");
@@ -75,17 +77,17 @@
#define TGFX_TOP2 0x08
static int tgfx_buttons[] = { BTN_TRIGGER, BTN_THUMB, BTN_THUMB2, BTN_TOP, BTN_TOP2 };
-static char *tgfx_name = "TurboGraFX Multisystem joystick";
static struct tgfx {
struct pardevice *pd;
struct timer_list timer;
- struct input_dev dev[7];
- char phys[7][32];
+ struct input_dev *dev[TGFX_MAX_DEVICES];
+ char name[TGFX_MAX_DEVICES][64];
+ char phys[TGFX_MAX_DEVICES][32];
int sticks;
int used;
struct semaphore sem;
-} *tgfx_base[3];
+} *tgfx_base[TGFX_MAX_PORTS];
/*
* tgfx_timer() reads and analyzes TurboGraFX joystick data.
@@ -100,7 +102,7 @@
for (i = 0; i < 7; i++)
if (tgfx->sticks & (1 << i)) {
- dev = tgfx->dev + i;
+ dev = tgfx->dev[i];
parport_write_data(tgfx->pd->port, ~(1 << i));
data1 = parport_read_status(tgfx->pd->port) ^ 0x7f;
@@ -153,118 +155,165 @@
up(&tgfx->sem);
}
+
+
/*
* tgfx_probe() probes for tg gamepads.
*/
-static struct tgfx __init *tgfx_probe(int *config, int nargs)
+static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
{
struct tgfx *tgfx;
+ struct input_dev *input_dev;
struct parport *pp;
+ struct pardevice *pd;
int i, j;
+ int err;
- if (config[0] < 0)
- return NULL;
-
- if (nargs < 2) {
- printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
- return NULL;
- }
-
- pp = parport_find_number(config[0]);
-
+ pp = parport_find_number(parport);
if (!pp) {
printk(KERN_ERR "turbografx.c: no such parport\n");
- return NULL;
+ err = -EINVAL;
+ goto err_out;
}
- if (!(tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL))) {
- parport_put_port(pp);
- return NULL;
+ pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+ if (!pd) {
+ printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n");
+ err = -EBUSY;
+ goto err_put_pp;
+ }
+
+ tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL);
+ if (!tgfx) {
+ printk(KERN_ERR "turbografx.c: Not enough memory\n");
+ err = -ENOMEM;
+ goto err_unreg_pardev;
}
init_MUTEX(&tgfx->sem);
-
- tgfx->pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
-
- parport_put_port(pp);
-
- if (!tgfx->pd) {
- printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n");
- kfree(tgfx);
- return NULL;
- }
-
+ tgfx->pd = pd;
init_timer(&tgfx->timer);
tgfx->timer.data = (long) tgfx;
tgfx->timer.function = tgfx_timer;
- tgfx->sticks = 0;
+ for (i = 0; i < n_devs; i++) {
+ if (n_buttons[i] < 1)
+ continue;
- for (i = 0; i < nargs - 1; i++)
- if (config[i+1] > 0 && config[i+1] < 6) {
-
- tgfx->sticks |= (1 << i);
-
- tgfx->dev[i].private = tgfx;
- tgfx->dev[i].open = tgfx_open;
- tgfx->dev[i].close = tgfx_close;
-
- sprintf(tgfx->phys[i], "%s/input0", tgfx->pd->port->name);
-
- tgfx->dev[i].name = tgfx_name;
- tgfx->dev[i].phys = tgfx->phys[i];
- tgfx->dev[i].id.bustype = BUS_PARPORT;
- tgfx->dev[i].id.vendor = 0x0003;
- tgfx->dev[i].id.product = config[i+1];
- tgfx->dev[i].id.version = 0x0100;
-
- tgfx->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- tgfx->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
-
- for (j = 0; j < config[i+1]; j++)
- set_bit(tgfx_buttons[j], tgfx->dev[i].keybit);
-
- tgfx->dev[i].absmin[ABS_X] = -1; tgfx->dev[i].absmax[ABS_X] = 1;
- tgfx->dev[i].absmin[ABS_Y] = -1; tgfx->dev[i].absmax[ABS_Y] = 1;
-
- input_register_device(tgfx->dev + i);
- printk(KERN_INFO "input: %d-button Multisystem joystick on %s\n",
- config[i+1], tgfx->pd->port->name);
+ if (n_buttons[i] > 6) {
+ printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]);
+ err = -EINVAL;
+ goto err_free_devs;
}
+ tgfx->dev[i] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "turbografx.c: Not enough memory for input device\n");
+ err = -ENOMEM;
+ goto err_free_devs;
+ }
+
+ tgfx->sticks |= (1 << i);
+ snprintf(tgfx->name[i], sizeof(tgfx->name[i]),
+ "TurboGraFX %d-button Multisystem joystick", n_buttons[i]);
+ snprintf(tgfx->phys[i], sizeof(tgfx->phys[i]),
+ "%s/input%d", tgfx->pd->port->name, i);
+
+ input_dev->name = tgfx->name[i];
+ input_dev->phys = tgfx->phys[i];
+ input_dev->id.bustype = BUS_PARPORT;
+ input_dev->id.vendor = 0x0003;
+ input_dev->id.product = n_buttons[i];
+ input_dev->id.version = 0x0100;
+
+ input_dev->private = tgfx;
+ input_dev->open = tgfx_open;
+ input_dev->close = tgfx_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0);
+
+ for (j = 0; j < n_buttons[i]; j++)
+ set_bit(tgfx_buttons[j], input_dev->keybit);
+
+ input_register_device(tgfx->dev[i]);
+ }
+
if (!tgfx->sticks) {
- parport_unregister_device(tgfx->pd);
- kfree(tgfx);
- return NULL;
+ printk(KERN_ERR "turbografx.c: No valid devices specified\n");
+ err = -EINVAL;
+ goto err_free_tgfx;
}
return tgfx;
+
+ err_free_devs:
+ while (--i >= 0)
+ input_unregister_device(tgfx->dev[i]);
+ err_free_tgfx:
+ kfree(tgfx);
+ err_unreg_pardev:
+ parport_unregister_device(pd);
+ err_put_pp:
+ parport_put_port(pp);
+ err_out:
+ return ERR_PTR(err);
+}
+
+static void __exit tgfx_remove(struct tgfx *tgfx)
+{
+ int i;
+
+ for (i = 0; i < TGFX_MAX_DEVICES; i++)
+ if (tgfx->dev[i])
+ input_unregister_device(tgfx->dev[i]);
+ parport_unregister_device(tgfx->pd);
+ kfree(tgfx);
}
static int __init tgfx_init(void)
{
- tgfx_base[0] = tgfx_probe(tgfx, tgfx_nargs);
- tgfx_base[1] = tgfx_probe(tgfx_2, tgfx_nargs_2);
- tgfx_base[2] = tgfx_probe(tgfx_3, tgfx_nargs_3);
+ int i;
+ int have_dev = 0;
+ int err = 0;
- if (tgfx_base[0] || tgfx_base[1] || tgfx_base[2])
- return 0;
+ for (i = 0; i < TGFX_MAX_PORTS; i++) {
+ if (tgfx[i].nargs == 0 || tgfx[i].args[0] < 0)
+ continue;
- return -ENODEV;
+ if (tgfx[i].nargs < 2) {
+ printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
+ err = -EINVAL;
+ break;
+ }
+
+ tgfx_base[i] = tgfx_probe(tgfx[i].args[0], tgfx[i].args + 1, tgfx[i].nargs - 1);
+ if (IS_ERR(tgfx_base[i])) {
+ err = PTR_ERR(tgfx_base[i]);
+ break;
+ }
+
+ have_dev = 1;
+ }
+
+ if (err) {
+ while (--i >= 0)
+ tgfx_remove(tgfx_base[i]);
+ return err;
+ }
+
+ return have_dev ? 0 : -ENODEV;
}
static void __exit tgfx_exit(void)
{
- int i, j;
+ int i;
- for (i = 0; i < 3; i++)
- if (tgfx_base[i]) {
- for (j = 0; j < 7; j++)
- if (tgfx_base[i]->sticks & (1 << j))
- input_unregister_device(tgfx_base[i]->dev + j);
- parport_unregister_device(tgfx_base[i]->pd);
- }
+ for (i = 0; i < TGFX_MAX_PORTS; i++)
+ if (tgfx_base[i])
+ tgfx_remove(tgfx_base[i]);
}
module_init(tgfx_init);
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
index 0379bc1..cd3a1e7 100644
--- a/drivers/input/joystick/twidjoy.c
+++ b/drivers/input/joystick/twidjoy.c
@@ -69,8 +69,6 @@
#define TWIDJOY_MAX_LENGTH 5
-static char *twidjoy_name = "Handykey Twiddler";
-
static struct twidjoy_button_spec {
int bitshift;
int bitmask;
@@ -95,7 +93,7 @@
*/
struct twidjoy {
- struct input_dev dev;
+ struct input_dev *dev;
int idx;
unsigned char data[TWIDJOY_MAX_LENGTH];
char phys[32];
@@ -108,37 +106,33 @@
static void twidjoy_process_packet(struct twidjoy *twidjoy, struct pt_regs *regs)
{
- if (twidjoy->idx == TWIDJOY_MAX_LENGTH) {
- struct input_dev *dev = &twidjoy->dev;
- unsigned char *data = twidjoy->data;
- struct twidjoy_button_spec *bp;
- int button_bits, abs_x, abs_y;
+ struct input_dev *dev = twidjoy->dev;
+ unsigned char *data = twidjoy->data;
+ struct twidjoy_button_spec *bp;
+ int button_bits, abs_x, abs_y;
- button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f);
+ button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f);
- input_regs(dev, regs);
+ input_regs(dev, regs);
- for (bp = twidjoy_buttons; bp->bitmask; bp++) {
- int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift;
- int i;
+ for (bp = twidjoy_buttons; bp->bitmask; bp++) {
+ int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift;
+ int i;
- for (i = 0; i < bp->bitmask; i++)
- input_report_key(dev, bp->buttons[i], i+1 == value);
- }
-
- abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2);
- if (data[4] & 0x08) abs_x -= 256;
-
- abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0);
- if (data[3] & 0x02) abs_y -= 256;
-
- input_report_abs(dev, ABS_X, -abs_x);
- input_report_abs(dev, ABS_Y, +abs_y);
-
- input_sync(dev);
+ for (i = 0; i < bp->bitmask; i++)
+ input_report_key(dev, bp->buttons[i], i+1 == value);
}
- return;
+ abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2);
+ if (data[4] & 0x08) abs_x -= 256;
+
+ abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0);
+ if (data[3] & 0x02) abs_y -= 256;
+
+ input_report_abs(dev, ABS_X, -abs_x);
+ input_report_abs(dev, ABS_Y, +abs_y);
+
+ input_sync(dev);
}
/*
@@ -179,9 +173,9 @@
{
struct twidjoy *twidjoy = serio_get_drvdata(serio);
- input_unregister_device(&twidjoy->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(twidjoy->dev);
kfree(twidjoy);
}
@@ -195,59 +189,49 @@
{
struct twidjoy_button_spec *bp;
struct twidjoy *twidjoy;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
int i;
- int err;
- if (!(twidjoy = kmalloc(sizeof(struct twidjoy), GFP_KERNEL)))
- return -ENOMEM;
+ twidjoy = kzalloc(sizeof(struct twidjoy), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!twidjoy || !input_dev)
+ goto fail;
- memset(twidjoy, 0, sizeof(struct twidjoy));
-
+ twidjoy->dev = input_dev;
sprintf(twidjoy->phys, "%s/input0", serio->phys);
- init_input_dev(&twidjoy->dev);
- twidjoy->dev.name = twidjoy_name;
- twidjoy->dev.phys = twidjoy->phys;
- twidjoy->dev.id.bustype = BUS_RS232;
- twidjoy->dev.id.vendor = SERIO_TWIDJOY;
- twidjoy->dev.id.product = 0x0001;
- twidjoy->dev.id.version = 0x0100;
- twidjoy->dev.dev = &serio->dev;
+ input_dev->name = "Handykey Twiddler";
+ input_dev->phys = twidjoy->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_TWIDJOY;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = twidjoy;
- twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+ input_set_abs_params(input_dev, ABS_X, -50, 50, 4, 4);
+ input_set_abs_params(input_dev, ABS_Y, -50, 50, 4, 4);
- for (bp = twidjoy_buttons; bp->bitmask; bp++) {
+ for (bp = twidjoy_buttons; bp->bitmask; bp++)
for (i = 0; i < bp->bitmask; i++)
- set_bit(bp->buttons[i], twidjoy->dev.keybit);
- }
-
- twidjoy->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
-
- for (i = 0; i < 2; i++) {
- twidjoy->dev.absmax[ABS_X+i] = 50;
- twidjoy->dev.absmin[ABS_X+i] = -50;
-
- /* TODO: arndt 20010708: Are these values appropriate? */
- twidjoy->dev.absfuzz[ABS_X+i] = 4;
- twidjoy->dev.absflat[ABS_X+i] = 4;
- }
-
- twidjoy->dev.private = twidjoy;
+ set_bit(bp->buttons[i], input_dev->keybit);
serio_set_drvdata(serio, twidjoy);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(twidjoy);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&twidjoy->dev);
-
- printk(KERN_INFO "input: %s on %s\n", twidjoy_name, serio->phys);
-
+ input_register_device(twidjoy->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(twidjoy);
+ return err;
}
/*
diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c
index 6976a21..99a642d 100644
--- a/drivers/input/joystick/warrior.c
+++ b/drivers/input/joystick/warrior.c
@@ -47,14 +47,13 @@
#define WARRIOR_MAX_LENGTH 16
static char warrior_lengths[] = { 0, 4, 12, 3, 4, 4, 0, 0 };
-static char *warrior_name = "Logitech WingMan Warrior";
/*
* Per-Warrior data.
*/
struct warrior {
- struct input_dev dev;
+ struct input_dev *dev;
int idx, len;
unsigned char data[WARRIOR_MAX_LENGTH];
char phys[32];
@@ -67,7 +66,7 @@
static void warrior_process_packet(struct warrior *warrior, struct pt_regs *regs)
{
- struct input_dev *dev = &warrior->dev;
+ struct input_dev *dev = warrior->dev;
unsigned char *data = warrior->data;
if (!warrior->idx) return;
@@ -131,9 +130,9 @@
{
struct warrior *warrior = serio_get_drvdata(serio);
- input_unregister_device(&warrior->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(warrior->dev);
kfree(warrior);
}
@@ -146,60 +145,48 @@
static int warrior_connect(struct serio *serio, struct serio_driver *drv)
{
struct warrior *warrior;
- int i;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- if (!(warrior = kmalloc(sizeof(struct warrior), GFP_KERNEL)))
- return -ENOMEM;
+ warrior = kzalloc(sizeof(struct warrior), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!warrior || !input_dev)
+ goto fail;
- memset(warrior, 0, sizeof(struct warrior));
-
- warrior->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
- warrior->dev.keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2);
- warrior->dev.relbit[0] = BIT(REL_DIAL);
- warrior->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_THROTTLE) | BIT(ABS_HAT0X) | BIT(ABS_HAT0Y);
-
+ warrior->dev = input_dev;
sprintf(warrior->phys, "%s/input0", serio->phys);
- init_input_dev(&warrior->dev);
- warrior->dev.name = warrior_name;
- warrior->dev.phys = warrior->phys;
- warrior->dev.id.bustype = BUS_RS232;
- warrior->dev.id.vendor = SERIO_WARRIOR;
- warrior->dev.id.product = 0x0001;
- warrior->dev.id.version = 0x0100;
- warrior->dev.dev = &serio->dev;
+ input_dev->name = "Logitech WingMan Warrior";
+ input_dev->phys = warrior->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_WARRIOR;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = warrior;
- for (i = 0; i < 2; i++) {
- warrior->dev.absmax[ABS_X+i] = -64;
- warrior->dev.absmin[ABS_X+i] = 64;
- warrior->dev.absflat[ABS_X+i] = 8;
- }
-
- warrior->dev.absmax[ABS_THROTTLE] = -112;
- warrior->dev.absmin[ABS_THROTTLE] = 112;
-
- for (i = 0; i < 2; i++) {
- warrior->dev.absmax[ABS_HAT0X+i] = -1;
- warrior->dev.absmin[ABS_HAT0X+i] = 1;
- }
-
- warrior->dev.private = warrior;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2);
+ input_dev->relbit[0] = BIT(REL_DIAL);
+ input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 8);
+ input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 8);
+ input_set_abs_params(input_dev, ABS_THROTTLE, -112, 112, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
serio_set_drvdata(serio, warrior);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(warrior);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&warrior->dev);
-
- printk(KERN_INFO "input: Logitech WingMan Warrior on %s\n", serio->phys);
-
+ input_register_device(warrior->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(warrior);
+ return err;
}
/*
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 4e8e8ea..4c8fb1f 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -155,10 +155,7 @@
[7] = KERN_WARNING "amikbd: keyboard interrupt\n"
};
-static struct input_dev amikbd_dev;
-
-static char *amikbd_name = "Amiga keyboard";
-static char *amikbd_phys = "amikbd/input0";
+static struct input_dev *amikbd_dev;
static irqreturn_t amikbd_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
@@ -176,16 +173,16 @@
scancode = amikbd_keycode[scancode];
- input_regs(&amikbd_dev, fp);
+ input_regs(amikbd_dev, fp);
if (scancode == KEY_CAPSLOCK) { /* CapsLock is a toggle switch key on Amiga */
- input_report_key(&amikbd_dev, scancode, 1);
- input_report_key(&amikbd_dev, scancode, 0);
- input_sync(&amikbd_dev);
+ input_report_key(amikbd_dev, scancode, 1);
+ input_report_key(amikbd_dev, scancode, 0);
} else {
- input_report_key(&amikbd_dev, scancode, down);
- input_sync(&amikbd_dev);
+ input_report_key(amikbd_dev, scancode, down);
}
+
+ input_sync(amikbd_dev);
} else /* scancodes >= 0x78 are error codes */
printk(amikbd_messages[scancode - 0x78]);
@@ -202,39 +199,41 @@
if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
return -EBUSY;
- init_input_dev(&amikbd_dev);
+ amikbd_dev = input_allocate_device();
+ if (!amikbd_dev) {
+ printk(KERN_ERR "amikbd: not enough memory for input device\n");
+ release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
+ return -ENOMEM;
+ }
- amikbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- amikbd_dev.keycode = amikbd_keycode;
- amikbd_dev.keycodesize = sizeof(unsigned char);
- amikbd_dev.keycodemax = ARRAY_SIZE(amikbd_keycode);
+ amikbd_dev->name = "Amiga Keyboard";
+ amikbd_dev->phys = "amikbd/input0";
+ amikbd_dev->id.bustype = BUS_AMIGA;
+ amikbd_dev->id.vendor = 0x0001;
+ amikbd_dev->id.product = 0x0001;
+ amikbd_dev->id.version = 0x0100;
+
+ amikbd_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ amikbd_dev->keycode = amikbd_keycode;
+ amikbd_dev->keycodesize = sizeof(unsigned char);
+ amikbd_dev->keycodemax = ARRAY_SIZE(amikbd_keycode);
for (i = 0; i < 0x78; i++)
if (amikbd_keycode[i])
- set_bit(amikbd_keycode[i], amikbd_dev.keybit);
+ set_bit(amikbd_keycode[i], amikbd_dev->keybit);
ciaa.cra &= ~0x41; /* serial data in, turn off TA */
request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd", amikbd_interrupt);
- amikbd_dev.name = amikbd_name;
- amikbd_dev.phys = amikbd_phys;
- amikbd_dev.id.bustype = BUS_AMIGA;
- amikbd_dev.id.vendor = 0x0001;
- amikbd_dev.id.product = 0x0001;
- amikbd_dev.id.version = 0x0100;
-
- input_register_device(&amikbd_dev);
-
- printk(KERN_INFO "input: %s\n", amikbd_name);
-
+ input_register_device(amikbd_dev);
return 0;
}
static void __exit amikbd_exit(void)
{
- input_unregister_device(&amikbd_dev);
free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
- release_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100);
+ input_unregister_device(amikbd_dev);
+ release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
}
module_init(amikbd_init);
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 1ad8c2e..820c7fd 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -185,12 +185,12 @@
struct atkbd {
- struct ps2dev ps2dev;
+ struct ps2dev ps2dev;
+ struct input_dev *dev;
/* Written only during init */
char name[64];
char phys[32];
- struct input_dev dev;
unsigned short id;
unsigned char keycode[512];
@@ -290,7 +290,7 @@
if (!atkbd->enabled)
goto out;
- input_event(&atkbd->dev, EV_MSC, MSC_RAW, code);
+ input_event(atkbd->dev, EV_MSC, MSC_RAW, code);
if (atkbd->translated) {
@@ -326,10 +326,10 @@
atkbd->release = 1;
goto out;
case ATKBD_RET_HANGUEL:
- atkbd_report_key(&atkbd->dev, regs, KEY_HANGUEL, 3);
+ atkbd_report_key(atkbd->dev, regs, KEY_HANGUEL, 3);
goto out;
case ATKBD_RET_HANJA:
- atkbd_report_key(&atkbd->dev, regs, KEY_HANJA, 3);
+ atkbd_report_key(atkbd->dev, regs, KEY_HANJA, 3);
goto out;
case ATKBD_RET_ERR:
printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
@@ -345,7 +345,7 @@
}
if (atkbd->keycode[code] != ATKBD_KEY_NULL)
- input_event(&atkbd->dev, EV_MSC, MSC_SCAN, code);
+ input_event(atkbd->dev, EV_MSC, MSC_SCAN, code);
switch (atkbd->keycode[code]) {
case ATKBD_KEY_NULL:
@@ -365,7 +365,7 @@
"to make it known.\n",
code & 0x80 ? "e0" : "", code & 0x7f);
}
- input_sync(&atkbd->dev);
+ input_sync(atkbd->dev);
break;
case ATKBD_SCR_1:
scroll = 1 - atkbd->release * 2;
@@ -390,7 +390,7 @@
break;
default:
value = atkbd->release ? 0 :
- (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev.key)));
+ (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev->key)));
switch (value) { /* Workaround Toshiba laptop multiple keypress */
case 0:
@@ -398,7 +398,7 @@
break;
case 1:
atkbd->last = code;
- atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev.rep[REP_DELAY]) / 2;
+ atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev->rep[REP_DELAY]) / 2;
break;
case 2:
if (!time_after(jiffies, atkbd->time) && atkbd->last == code)
@@ -406,16 +406,16 @@
break;
}
- atkbd_report_key(&atkbd->dev, regs, atkbd->keycode[code], value);
+ atkbd_report_key(atkbd->dev, regs, atkbd->keycode[code], value);
}
if (atkbd->scroll) {
- input_regs(&atkbd->dev, regs);
+ input_regs(atkbd->dev, regs);
if (click != -1)
- input_report_key(&atkbd->dev, BTN_MIDDLE, click);
- input_report_rel(&atkbd->dev, REL_WHEEL, scroll);
- input_report_rel(&atkbd->dev, REL_HWHEEL, hscroll);
- input_sync(&atkbd->dev);
+ input_report_key(atkbd->dev, BTN_MIDDLE, click);
+ input_report_rel(atkbd->dev, REL_WHEEL, scroll);
+ input_report_rel(atkbd->dev, REL_HWHEEL, hscroll);
+ input_sync(atkbd->dev);
}
atkbd->release = 0;
@@ -463,7 +463,6 @@
return 0;
-
case EV_REP:
if (atkbd->softrepeat) return 0;
@@ -693,7 +692,7 @@
device_remove_file(&serio->dev, &atkbd_attr_softrepeat);
device_remove_file(&serio->dev, &atkbd_attr_softraw);
- input_unregister_device(&atkbd->dev);
+ input_unregister_device(atkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(atkbd);
@@ -701,7 +700,7 @@
/*
- * atkbd_set_device_attrs() initializes keyboard's keycode table
+ * atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
*/
@@ -737,53 +736,58 @@
static void atkbd_set_device_attrs(struct atkbd *atkbd)
{
+ struct input_dev *input_dev = atkbd->dev;
int i;
- memset(&atkbd->dev, 0, sizeof(struct input_dev));
+ if (atkbd->extra)
+ sprintf(atkbd->name, "AT Set 2 Extra keyboard");
+ else
+ sprintf(atkbd->name, "AT %s Set %d keyboard",
+ atkbd->translated ? "Translated" : "Raw", atkbd->set);
- init_input_dev(&atkbd->dev);
+ sprintf(atkbd->phys, "%s/input0", atkbd->ps2dev.serio->phys);
- atkbd->dev.name = atkbd->name;
- atkbd->dev.phys = atkbd->phys;
- atkbd->dev.id.bustype = BUS_I8042;
- atkbd->dev.id.vendor = 0x0001;
- atkbd->dev.id.product = atkbd->translated ? 1 : atkbd->set;
- atkbd->dev.id.version = atkbd->id;
- atkbd->dev.event = atkbd_event;
- atkbd->dev.private = atkbd;
- atkbd->dev.dev = &atkbd->ps2dev.serio->dev;
+ input_dev->name = atkbd->name;
+ input_dev->phys = atkbd->phys;
+ input_dev->id.bustype = BUS_I8042;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = atkbd->translated ? 1 : atkbd->set;
+ input_dev->id.version = atkbd->id;
+ input_dev->event = atkbd_event;
+ input_dev->private = atkbd;
+ input_dev->cdev.dev = &atkbd->ps2dev.serio->dev;
- atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC);
if (atkbd->write) {
- atkbd->dev.evbit[0] |= BIT(EV_LED);
- atkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
+ input_dev->evbit[0] |= BIT(EV_LED);
+ input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
}
if (atkbd->extra)
- atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) |
+ input_dev->ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) |
BIT(LED_SLEEP) | BIT(LED_MUTE) | BIT(LED_MISC);
if (!atkbd->softrepeat) {
- atkbd->dev.rep[REP_DELAY] = 250;
- atkbd->dev.rep[REP_PERIOD] = 33;
+ input_dev->rep[REP_DELAY] = 250;
+ input_dev->rep[REP_PERIOD] = 33;
}
- atkbd->dev.mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN);
+ input_dev->mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN);
if (atkbd->scroll) {
- atkbd->dev.evbit[0] |= BIT(EV_REL);
- atkbd->dev.relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL);
- set_bit(BTN_MIDDLE, atkbd->dev.keybit);
+ input_dev->evbit[0] |= BIT(EV_REL);
+ input_dev->relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL);
+ set_bit(BTN_MIDDLE, input_dev->keybit);
}
- atkbd->dev.keycode = atkbd->keycode;
- atkbd->dev.keycodesize = sizeof(unsigned char);
- atkbd->dev.keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
+ input_dev->keycode = atkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
for (i = 0; i < 512; i++)
if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
- set_bit(atkbd->keycode[i], atkbd->dev.keybit);
+ set_bit(atkbd->keycode[i], input_dev->keybit);
}
/*
@@ -796,13 +800,15 @@
static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct atkbd *atkbd;
- int err;
+ struct input_dev *dev;
+ int err = -ENOMEM;
- if (!(atkbd = kmalloc(sizeof(struct atkbd), GFP_KERNEL)))
- return - ENOMEM;
+ atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL);
+ dev = input_allocate_device();
+ if (!atkbd || !dev)
+ goto fail;
- memset(atkbd, 0, sizeof(struct atkbd));
-
+ atkbd->dev = dev;
ps2_init(&atkbd->ps2dev, serio);
switch (serio->id.type) {
@@ -828,19 +834,15 @@
serio_set_drvdata(serio, atkbd);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(atkbd);
- return err;
- }
+ if (err)
+ goto fail;
if (atkbd->write) {
if (atkbd_probe(atkbd)) {
serio_close(serio);
- serio_set_drvdata(serio, NULL);
- kfree(atkbd);
- return -ENODEV;
+ err = -ENODEV;
+ goto fail;
}
atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
@@ -851,19 +853,9 @@
atkbd->id = 0xab00;
}
- if (atkbd->extra)
- sprintf(atkbd->name, "AT Set 2 Extra keyboard");
- else
- sprintf(atkbd->name, "AT %s Set %d keyboard",
- atkbd->translated ? "Translated" : "Raw", atkbd->set);
-
- sprintf(atkbd->phys, "%s/input0", serio->phys);
-
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
-
device_create_file(&serio->dev, &atkbd_attr_extra);
device_create_file(&serio->dev, &atkbd_attr_scroll);
device_create_file(&serio->dev, &atkbd_attr_set);
@@ -872,9 +864,14 @@
atkbd_enable(atkbd);
- printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys);
+ input_register_device(atkbd->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(dev);
+ kfree(atkbd);
+ return err;
}
/*
@@ -896,9 +893,9 @@
atkbd_disable(atkbd);
if (atkbd->write) {
- param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0)
- | (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0)
- | (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
+ param[0] = (test_bit(LED_SCROLLL, atkbd->dev->led) ? 1 : 0)
+ | (test_bit(LED_NUML, atkbd->dev->led) ? 2 : 0)
+ | (test_bit(LED_CAPSL, atkbd->dev->led) ? 4 : 0);
if (atkbd_probe(atkbd))
return -1;
@@ -1008,6 +1005,7 @@
static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1019,12 +1017,19 @@
return -EINVAL;
if (atkbd->extra != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ /*
+ * Since device's properties will change we need to
+ * unregister old device. But allocate new one first
+ * to make sure we have it.
+ */
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
atkbd_activate(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
return count;
}
@@ -1036,6 +1041,7 @@
static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1044,12 +1050,14 @@
return -EINVAL;
if (atkbd->scroll != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->scroll = value;
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
return count;
}
@@ -1061,6 +1069,7 @@
static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1072,13 +1081,15 @@
return -EINVAL;
if (atkbd->set != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
atkbd_activate(atkbd);
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
return count;
}
@@ -1090,6 +1101,7 @@
static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1101,15 +1113,16 @@
return -EINVAL;
if (atkbd->softrepeat != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->softrepeat = value;
if (atkbd->softrepeat)
atkbd->softraw = 1;
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
-
return count;
}
@@ -1121,6 +1134,7 @@
static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1129,11 +1143,13 @@
return -EINVAL;
if (atkbd->softraw != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->softraw = value;
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
return count;
}
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index cd4b6e7..3210d29 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -70,8 +70,7 @@
struct corgikbd {
unsigned char keycode[ARRAY_SIZE(corgikbd_keycode)];
- struct input_dev input;
- char phys[32];
+ struct input_dev *input;
spinlock_t lock;
struct timer_list timer;
@@ -147,7 +146,7 @@
spin_lock_irqsave(&corgikbd_data->lock, flags);
if (regs)
- input_regs(&corgikbd_data->input, regs);
+ input_regs(corgikbd_data->input, regs);
num_pressed = 0;
for (col = 0; col < KB_COLS; col++) {
@@ -169,14 +168,14 @@
scancode = SCANCODE(row, col);
pressed = rowd & KB_ROWMASK(row);
- input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], pressed);
+ input_report_key(corgikbd_data->input, corgikbd_data->keycode[scancode], pressed);
if (pressed)
num_pressed++;
if (pressed && (corgikbd_data->keycode[scancode] == CORGI_KEY_OFF)
&& time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) {
- input_event(&corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1);
+ input_event(corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1);
corgikbd_data->suspend_jiffies=jiffies;
}
}
@@ -185,7 +184,7 @@
corgikbd_activate_all();
- input_sync(&corgikbd_data->input);
+ input_sync(corgikbd_data->input);
/* if any keys are pressed, enable the timer */
if (num_pressed)
@@ -249,9 +248,9 @@
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&corgikbd_data->lock, flags);
- input_report_switch(&corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
- input_report_switch(&corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
- input_sync(&corgikbd_data->input);
+ input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
+ input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
+ input_sync(corgikbd_data->input);
spin_unlock_irqrestore(&corgikbd_data->lock, flags);
}
@@ -260,24 +259,22 @@
}
#ifdef CONFIG_PM
-static int corgikbd_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int corgikbd_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct corgikbd *corgikbd = dev_get_drvdata(dev);
- corgikbd->suspended = 1;
- }
+ struct corgikbd *corgikbd = dev_get_drvdata(dev);
+ corgikbd->suspended = 1;
+
return 0;
}
-static int corgikbd_resume(struct device *dev, uint32_t level)
+static int corgikbd_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct corgikbd *corgikbd = dev_get_drvdata(dev);
+ struct corgikbd *corgikbd = dev_get_drvdata(dev);
- /* Upon resume, ignore the suspend key for a short while */
- corgikbd->suspend_jiffies=jiffies;
- corgikbd->suspended = 0;
- }
+ /* Upon resume, ignore the suspend key for a short while */
+ corgikbd->suspend_jiffies=jiffies;
+ corgikbd->suspended = 0;
+
return 0;
}
#else
@@ -287,16 +284,21 @@
static int __init corgikbd_probe(struct device *dev)
{
- int i;
struct corgikbd *corgikbd;
+ struct input_dev *input_dev;
+ int i;
corgikbd = kzalloc(sizeof(struct corgikbd), GFP_KERNEL);
- if (!corgikbd)
+ input_dev = input_allocate_device();
+ if (!corgikbd || !input_dev) {
+ kfree(corgikbd);
+ input_free_device(input_dev);
return -ENOMEM;
+ }
- dev_set_drvdata(dev,corgikbd);
- strcpy(corgikbd->phys, "corgikbd/input0");
+ dev_set_drvdata(dev, corgikbd);
+ corgikbd->input = input_dev;
spin_lock_init(&corgikbd->lock);
/* Init Keyboard rescan timer */
@@ -311,28 +313,30 @@
corgikbd->suspend_jiffies=jiffies;
- init_input_dev(&corgikbd->input);
- corgikbd->input.private = corgikbd;
- corgikbd->input.name = "Corgi Keyboard";
- corgikbd->input.dev = dev;
- corgikbd->input.phys = corgikbd->phys;
- corgikbd->input.id.bustype = BUS_HOST;
- corgikbd->input.id.vendor = 0x0001;
- corgikbd->input.id.product = 0x0001;
- corgikbd->input.id.version = 0x0100;
- corgikbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
- corgikbd->input.keycode = corgikbd->keycode;
- corgikbd->input.keycodesize = sizeof(unsigned char);
- corgikbd->input.keycodemax = ARRAY_SIZE(corgikbd_keycode);
-
memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode));
- for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
- set_bit(corgikbd->keycode[i], corgikbd->input.keybit);
- clear_bit(0, corgikbd->input.keybit);
- set_bit(SW_0, corgikbd->input.swbit);
- set_bit(SW_1, corgikbd->input.swbit);
- input_register_device(&corgikbd->input);
+ input_dev->name = "Corgi Keyboard";
+ input_dev->phys = "corgikbd/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = dev;
+ input_dev->private = corgikbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
+ input_dev->keycode = corgikbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode);
+
+ for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
+ set_bit(corgikbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+ set_bit(SW_0, input_dev->swbit);
+ set_bit(SW_1, input_dev->swbit);
+
+ input_register_device(corgikbd->input);
+
mod_timer(&corgikbd->htimer, jiffies + HINGE_SCAN_INTERVAL);
/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
@@ -349,8 +353,6 @@
for (i = 0; i < CORGI_KEY_STROBE_NUM; i++)
pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
- printk(KERN_INFO "input: Corgi Keyboard Registered\n");
-
return 0;
}
@@ -365,7 +367,7 @@
del_timer_sync(&corgikbd->htimer);
del_timer_sync(&corgikbd->timer);
- input_unregister_device(&corgikbd->input);
+ input_unregister_device(corgikbd->input);
kfree(corgikbd);
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index ef78bff..0a90962 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -204,7 +204,7 @@
hil_packet packet;
int idx;
- kbd = (struct hil_kbd *)serio->private;
+ kbd = serio_get_drvdata(serio);
if (kbd == NULL) {
BUG();
return IRQ_HANDLED;
@@ -234,7 +234,7 @@
{
struct hil_kbd *kbd;
- kbd = (struct hil_kbd *)serio->private;
+ kbd = serio_get_drvdata(serio);
if (kbd == NULL) {
BUG();
return;
@@ -245,20 +245,20 @@
kfree(kbd);
}
-static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
+static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct hil_kbd *kbd;
uint8_t did, *idd;
int i;
- if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return;
-
- if (!(kbd = kmalloc(sizeof(struct hil_kbd), GFP_KERNEL))) return;
+ kbd = kmalloc(sizeof(*kbd), GFP_KERNEL);
+ if (!kbd)
+ return -ENOMEM;
memset(kbd, 0, sizeof(struct hil_kbd));
if (serio_open(serio, drv)) goto bail0;
- serio->private = kbd;
+ serio_set_drvdata(serio, kbd);
kbd->serio = serio;
kbd->dev.private = kbd;
@@ -342,19 +342,31 @@
down(&(kbd->sem));
up(&(kbd->sem));
- return;
+ return 0;
bail1:
serio_close(serio);
bail0:
kfree(kbd);
+ serio_set_drvdata(serio, NULL);
+ return -EIO;
}
+static struct serio_device_id hil_kbd_ids[] = {
+ {
+ .type = SERIO_HIL_MLC,
+ .proto = SERIO_HIL,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
struct serio_driver hil_kbd_serio_drv = {
.driver = {
.name = "hil_kbd",
},
.description = "HP HIL keyboard driver",
+ .id_table = hil_kbd_ids,
.connect = hil_kbd_connect,
.disconnect = hil_kbd_disconnect,
.interrupt = hil_kbd_interrupt
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index eecb77d..e95bc05 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -22,7 +22,7 @@
#include <linux/errno.h>
#include <linux/input.h>
#include <linux/init.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/hil.h>
#include <linux/spinlock.h>
@@ -278,11 +278,11 @@
hil_init_chip(struct parisc_device *dev)
{
if (!dev->irq) {
- printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa);
+ printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start);
return -ENODEV;
}
- hil_base = dev->hpa;
+ hil_base = dev->hpa.start;
hil_irq = dev->irq;
hil_dev.dev_id = dev;
@@ -299,7 +299,7 @@
MODULE_DEVICE_TABLE(parisc, hil_tbl);
static struct parisc_driver hil_driver = {
- .name = "HIL",
+ .name = "hil",
.id_table = hil_tbl,
.probe = hil_init_chip,
};
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index 098963c..7f06780 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -102,7 +102,7 @@
module_param (ctrlclick_volume, int, 0);
MODULE_PARM_DESC (ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
-static int lk201_compose_is_alt = 0;
+static int lk201_compose_is_alt;
module_param (lk201_compose_is_alt, int, 0);
MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key "
"will act as an Alt key");
@@ -274,7 +274,7 @@
};
#define CHECK_LED(LED, BITS) do { \
- if (test_bit (LED, lk->dev.led)) \
+ if (test_bit (LED, lk->dev->led)) \
leds_on |= BITS; \
else \
leds_off |= BITS; \
@@ -287,7 +287,7 @@
lk_keycode_t keycode[LK_NUM_KEYCODES];
int ignore_bytes;
unsigned char id[LK_NUM_IGNORE_BYTES];
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
struct work_struct tq;
char name[64];
@@ -423,8 +423,7 @@
DBG (KERN_INFO "Got byte 0x%02x\n", data);
if (lk->ignore_bytes > 0) {
- DBG (KERN_INFO "Ignoring a byte on %s\n",
- lk->name);
+ DBG (KERN_INFO "Ignoring a byte on %s\n", lk->name);
lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
if (lk->ignore_bytes == 0)
@@ -435,14 +434,14 @@
switch (data) {
case LK_ALL_KEYS_UP:
- input_regs (&lk->dev, regs);
+ input_regs (lk->dev, regs);
for (i = 0; i < ARRAY_SIZE (lkkbd_keycode); i++)
if (lk->keycode[i] != KEY_RESERVED)
- input_report_key (&lk->dev, lk->keycode[i], 0);
- input_sync (&lk->dev);
+ input_report_key (lk->dev, lk->keycode[i], 0);
+ input_sync (lk->dev);
break;
case LK_METRONOME:
- DBG (KERN_INFO "Got LK_METRONOME and don't "
+ DBG (KERN_INFO "Got %#d and don't "
"know how to handle...\n");
break;
case LK_OUTPUT_ERROR:
@@ -482,12 +481,12 @@
default:
if (lk->keycode[data] != KEY_RESERVED) {
- input_regs (&lk->dev, regs);
- if (!test_bit (lk->keycode[data], lk->dev.key))
- input_report_key (&lk->dev, lk->keycode[data], 1);
+ input_regs (lk->dev, regs);
+ if (!test_bit (lk->keycode[data], lk->dev->key))
+ input_report_key (lk->dev, lk->keycode[data], 1);
else
- input_report_key (&lk->dev, lk->keycode[data], 0);
- input_sync (&lk->dev);
+ input_report_key (lk->dev, lk->keycode[data], 0);
+ input_sync (lk->dev);
} else
printk (KERN_WARNING "%s: Unknown key with "
"scancode 0x%02x on %s.\n",
@@ -605,7 +604,7 @@
lk->serio->write (lk->serio, volume_to_hw (lk->bell_volume));
/* Enable/disable keyclick (and possibly set volume) */
- if (test_bit (SND_CLICK, lk->dev.snd)) {
+ if (test_bit (SND_CLICK, lk->dev->snd)) {
lk->serio->write (lk->serio, LK_CMD_ENABLE_KEYCLICK);
lk->serio->write (lk->serio, volume_to_hw (lk->keyclick_volume));
lk->serio->write (lk->serio, LK_CMD_ENABLE_CTRCLICK);
@@ -616,7 +615,7 @@
}
/* Sound the bell if needed */
- if (test_bit (SND_BELL, lk->dev.snd))
+ if (test_bit (SND_BELL, lk->dev->snd))
lk->serio->write (lk->serio, LK_CMD_SOUND_BELL);
}
@@ -627,71 +626,70 @@
lkkbd_connect (struct serio *serio, struct serio_driver *drv)
{
struct lkkbd *lk;
+ struct input_dev *input_dev;
int i;
int err;
- if (!(lk = kmalloc (sizeof (struct lkkbd), GFP_KERNEL)))
- return -ENOMEM;
-
- memset (lk, 0, sizeof (struct lkkbd));
-
- init_input_dev (&lk->dev);
- set_bit (EV_KEY, lk->dev.evbit);
- set_bit (EV_LED, lk->dev.evbit);
- set_bit (EV_SND, lk->dev.evbit);
- set_bit (EV_REP, lk->dev.evbit);
- set_bit (LED_CAPSL, lk->dev.ledbit);
- set_bit (LED_SLEEP, lk->dev.ledbit);
- set_bit (LED_COMPOSE, lk->dev.ledbit);
- set_bit (LED_SCROLLL, lk->dev.ledbit);
- set_bit (SND_BELL, lk->dev.sndbit);
- set_bit (SND_CLICK, lk->dev.sndbit);
+ lk = kzalloc (sizeof (struct lkkbd), GFP_KERNEL);
+ input_dev = input_allocate_device ();
+ if (!lk || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
+ }
lk->serio = serio;
-
+ lk->dev = input_dev;
INIT_WORK (&lk->tq, lkkbd_reinit, lk);
-
lk->bell_volume = bell_volume;
lk->keyclick_volume = keyclick_volume;
lk->ctrlclick_volume = ctrlclick_volume;
+ memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES);
- lk->dev.keycode = lk->keycode;
- lk->dev.keycodesize = sizeof (lk_keycode_t);
- lk->dev.keycodemax = LK_NUM_KEYCODES;
+ strlcpy (lk->name, "DEC LK keyboard", sizeof(lk->name));
+ snprintf (lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
- lk->dev.event = lkkbd_event;
- lk->dev.private = lk;
+ input_dev->name = lk->name;
+ input_dev->phys = lk->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_LKKBD;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->event = lkkbd_event;
+ input_dev->private = lk;
+
+ set_bit (EV_KEY, input_dev->evbit);
+ set_bit (EV_LED, input_dev->evbit);
+ set_bit (EV_SND, input_dev->evbit);
+ set_bit (EV_REP, input_dev->evbit);
+ set_bit (LED_CAPSL, input_dev->ledbit);
+ set_bit (LED_SLEEP, input_dev->ledbit);
+ set_bit (LED_COMPOSE, input_dev->ledbit);
+ set_bit (LED_SCROLLL, input_dev->ledbit);
+ set_bit (SND_BELL, input_dev->sndbit);
+ set_bit (SND_CLICK, input_dev->sndbit);
+
+ input_dev->keycode = lk->keycode;
+ input_dev->keycodesize = sizeof (lk_keycode_t);
+ input_dev->keycodemax = LK_NUM_KEYCODES;
+ for (i = 0; i < LK_NUM_KEYCODES; i++)
+ set_bit (lk->keycode[i], input_dev->keybit);
serio_set_drvdata (serio, lk);
err = serio_open (serio, drv);
- if (err) {
- serio_set_drvdata (serio, NULL);
- kfree (lk);
- return err;
- }
+ if (err)
+ goto fail;
- sprintf (lk->name, "DEC LK keyboard");
- sprintf (lk->phys, "%s/input0", serio->phys);
-
- memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES);
- for (i = 0; i < LK_NUM_KEYCODES; i++)
- set_bit (lk->keycode[i], lk->dev.keybit);
-
- lk->dev.name = lk->name;
- lk->dev.phys = lk->phys;
- lk->dev.id.bustype = BUS_RS232;
- lk->dev.id.vendor = SERIO_LKKBD;
- lk->dev.id.product = 0;
- lk->dev.id.version = 0x0100;
- lk->dev.dev = &serio->dev;
-
- input_register_device (&lk->dev);
-
- printk (KERN_INFO "input: %s on %s, initiating reset\n", lk->name, serio->phys);
+ input_register_device (lk->dev);
lk->serio->write (lk->serio, LK_CMD_POWERCYCLE_RESET);
return 0;
+
+ fail: serio_set_drvdata (serio, NULL);
+ input_free_device (input_dev);
+ kfree (lk);
+ return err;
}
/*
@@ -702,9 +700,11 @@
{
struct lkkbd *lk = serio_get_drvdata (serio);
- input_unregister_device (&lk->dev);
+ input_get_device (lk->dev);
+ input_unregister_device (lk->dev);
serio_close (serio);
serio_set_drvdata (serio, NULL);
+ input_put_device (lk->dev);
kfree (lk);
}
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index eecbde2..cc6aaf9 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -37,7 +37,7 @@
struct dc_kbd {
- struct input_dev dev;
+ struct input_dev *dev;
unsigned char new[8];
unsigned char old[8];
};
@@ -46,30 +46,24 @@
static void dc_scan_kbd(struct dc_kbd *kbd)
{
int i;
- struct input_dev *dev = &kbd->dev;
+ struct input_dev *dev = kbd->dev;
- for(i=0; i<8; i++)
- input_report_key(dev,
- dc_kbd_keycode[i+224],
- (kbd->new[0]>>i)&1);
+ for (i = 0; i < 8; i++)
+ input_report_key(dev, dc_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
- for(i=2; i<8; i++) {
+ for (i = 2; i < 8; i++) {
- if(kbd->old[i]>3&&memscan(kbd->new+2, kbd->old[i], 6)==NULL) {
- if(dc_kbd_keycode[kbd->old[i]])
- input_report_key(dev,
- dc_kbd_keycode[kbd->old[i]],
- 0);
+ if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == NULL) {
+ if (dc_kbd_keycode[kbd->old[i]])
+ input_report_key(dev, dc_kbd_keycode[kbd->old[i]], 0);
else
printk("Unknown key (scancode %#x) released.",
kbd->old[i]);
}
- if(kbd->new[i]>3&&memscan(kbd->old+2, kbd->new[i], 6)!=NULL) {
+ if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) != NULL) {
if(dc_kbd_keycode[kbd->new[i]])
- input_report_key(dev,
- dc_kbd_keycode[kbd->new[i]],
- 1);
+ input_report_key(dev, dc_kbd_keycode[kbd->new[i]], 1);
else
printk("Unknown key (scancode %#x) pressed.",
kbd->new[i]);
@@ -89,43 +83,39 @@
unsigned long *buf = mq->recvbuf;
if (buf[1] == mapledev->function) {
- memcpy(kbd->new, buf+2, 8);
+ memcpy(kbd->new, buf + 2, 8);
dc_scan_kbd(kbd);
}
}
static int dc_kbd_connect(struct maple_device *dev)
{
- int i;
- unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
struct dc_kbd *kbd;
+ struct input_dev *input_dev;
+ unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
+ int i;
- if (!(kbd = kmalloc(sizeof(struct dc_kbd), GFP_KERNEL)))
- return -1;
- memset(kbd, 0, sizeof(struct dc_kbd));
+ dev->private_data = kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!kbd || !input_dev) {
+ kfree(kbd);
+ input_free_device(input_dev);
+ return -ENOMEM;
+ }
- dev->private_data = kbd;
+ kbd->dev = input_dev;
- kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ input_dev->name = dev->product_name;
+ input_dev->id.bustype = BUS_MAPLE;
+ input_dev->private = kbd;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ for (i = 0; i < 255; i++)
+ set_bit(dc_kbd_keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
- init_input_dev(&kbd->dev);
-
- for (i=0; i<255; i++)
- set_bit(dc_kbd_keycode[i], kbd->dev.keybit);
-
- clear_bit(0, kbd->dev.keybit);
-
- kbd->dev.private = kbd;
-
- kbd->dev.name = dev->product_name;
- kbd->dev.id.bustype = BUS_MAPLE;
-
- input_register_device(&kbd->dev);
+ input_register_device(kbd->dev);
maple_getcond_callback(dev, dc_kbd_callback, 1, MAPLE_FUNC_KEYBOARD);
-
- printk(KERN_INFO "input: keyboard(0x%lx): %s\n", data, kbd->dev.name);
-
return 0;
}
@@ -134,7 +124,7 @@
{
struct dc_kbd *kbd = dev->private_data;
- input_unregister_device(&kbd->dev);
+ input_unregister_device(kbd->dev);
kfree(kbd);
}
diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c
index 2e8ce16..d10983c 100644
--- a/drivers/input/keyboard/newtonkbd.c
+++ b/drivers/input/keyboard/newtonkbd.c
@@ -57,11 +57,9 @@
KEY_LEFT, KEY_RIGHT, KEY_DOWN, KEY_UP, 0
};
-static char *nkbd_name = "Newton Keyboard";
-
struct nkbd {
unsigned char keycode[128];
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
char phys[32];
};
@@ -73,13 +71,13 @@
/* invalid scan codes are probably the init sequence, so we ignore them */
if (nkbd->keycode[data & NKBD_KEY]) {
- input_regs(&nkbd->dev, regs);
- input_report_key(&nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS);
- input_sync(&nkbd->dev);
+ input_regs(nkbd->dev, regs);
+ input_report_key(nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS);
+ input_sync(nkbd->dev);
}
else if (data == 0xe7) /* end of init sequence */
- printk(KERN_INFO "input: %s on %s\n", nkbd_name, serio->phys);
+ printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys);
return IRQ_HANDLED;
}
@@ -87,62 +85,59 @@
static int nkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct nkbd *nkbd;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
int i;
- int err;
- if (!(nkbd = kmalloc(sizeof(struct nkbd), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(nkbd, 0, sizeof(struct nkbd));
-
- nkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ nkbd = kzalloc(sizeof(struct nkbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!nkbd || !input_dev)
+ goto fail;
nkbd->serio = serio;
+ nkbd->dev = input_dev;
+ sprintf(nkbd->phys, "%s/input0", serio->phys);
+ memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode));
- init_input_dev(&nkbd->dev);
- nkbd->dev.keycode = nkbd->keycode;
- nkbd->dev.keycodesize = sizeof(unsigned char);
- nkbd->dev.keycodemax = ARRAY_SIZE(nkbd_keycode);
- nkbd->dev.private = nkbd;
+ input_dev->name = "Newton Keyboard";
+ input_dev->phys = nkbd->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_NEWTON;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = nkbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ input_dev->keycode = nkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(nkbd_keycode);
+ for (i = 0; i < 128; i++)
+ set_bit(nkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
serio_set_drvdata(serio, nkbd);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(nkbd);
- return err;
- }
+ if (err)
+ goto fail;
- memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode));
- for (i = 0; i < 128; i++)
- set_bit(nkbd->keycode[i], nkbd->dev.keybit);
- clear_bit(0, nkbd->dev.keybit);
-
- sprintf(nkbd->phys, "%s/input0", serio->phys);
-
- nkbd->dev.name = nkbd_name;
- nkbd->dev.phys = nkbd->phys;
- nkbd->dev.id.bustype = BUS_RS232;
- nkbd->dev.id.vendor = SERIO_NEWTON;
- nkbd->dev.id.product = 0x0001;
- nkbd->dev.id.version = 0x0100;
- nkbd->dev.dev = &serio->dev;
-
- input_register_device(&nkbd->dev);
-
- printk(KERN_INFO "input: %s on %s\n", nkbd_name, serio->phys);
-
+ input_register_device(nkbd->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(nkbd);
+ return err;
}
static void nkbd_disconnect(struct serio *serio)
{
struct nkbd *nkbd = serio_get_drvdata(serio);
- input_unregister_device(&nkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(nkbd->dev);
kfree(nkbd);
}
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 344f460..cee9c73 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -85,7 +85,7 @@
struct spitzkbd {
unsigned char keycode[ARRAY_SIZE(spitzkbd_keycode)];
- struct input_dev input;
+ struct input_dev *input;
char phys[32];
spinlock_t lock;
@@ -187,8 +187,7 @@
spin_lock_irqsave(&spitzkbd_data->lock, flags);
- if (regs)
- input_regs(&spitzkbd_data->input, regs);
+ input_regs(spitzkbd_data->input, regs);
num_pressed = 0;
for (col = 0; col < KB_COLS; col++) {
@@ -210,7 +209,7 @@
scancode = SCANCODE(row, col);
pressed = rowd & KB_ROWMASK(row);
- input_report_key(&spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed);
+ input_report_key(spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed);
if (pressed)
num_pressed++;
@@ -220,15 +219,15 @@
spitzkbd_activate_all();
- input_report_key(&spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 );
- input_report_key(&spitzkbd_data->input, KEY_SUSPEND, pwrkey);
+ input_report_key(spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 );
+ input_report_key(spitzkbd_data->input, KEY_SUSPEND, pwrkey);
if (pwrkey && time_after(jiffies, spitzkbd_data->suspend_jiffies + msecs_to_jiffies(1000))) {
- input_event(&spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1);
+ input_event(spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1);
spitzkbd_data->suspend_jiffies = jiffies;
}
- input_sync(&spitzkbd_data->input);
+ input_sync(spitzkbd_data->input);
/* if any keys are pressed, enable the timer */
if (num_pressed)
@@ -259,6 +258,7 @@
static void spitzkbd_timer_callback(unsigned long data)
{
struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
+
spitzkbd_scankeyboard(spitzkbd_data, NULL);
}
@@ -298,9 +298,9 @@
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&spitzkbd_data->lock, flags);
- input_report_switch(&spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
- input_report_switch(&spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
- input_sync(&spitzkbd_data->input);
+ input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+ input_sync(spitzkbd_data->input);
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
} else {
@@ -309,34 +309,32 @@
}
#ifdef CONFIG_PM
-static int spitzkbd_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int spitzkbd_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- int i;
- struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
- spitzkbd->suspended = 1;
+ int i;
+ struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
+ spitzkbd->suspended = 1;
- /* Set Strobe lines as inputs - *except* strobe line 0 leave this
- enabled so we can detect a power button press for resume */
- for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++)
- pxa_gpio_mode(spitz_strobes[i] | GPIO_IN);
- }
+ /* Set Strobe lines as inputs - *except* strobe line 0 leave this
+ enabled so we can detect a power button press for resume */
+ for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++)
+ pxa_gpio_mode(spitz_strobes[i] | GPIO_IN);
+
return 0;
}
-static int spitzkbd_resume(struct device *dev, uint32_t level)
+static int spitzkbd_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- int i;
- struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
+ int i;
+ struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
- for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
- pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
+ for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
+ pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
- /* Upon resume, ignore the suspend key for a short while */
- spitzkbd->suspend_jiffies = jiffies;
- spitzkbd->suspended = 0;
- }
+ /* Upon resume, ignore the suspend key for a short while */
+ spitzkbd->suspend_jiffies = jiffies;
+ spitzkbd->suspended = 0;
+
return 0;
}
#else
@@ -346,14 +344,21 @@
static int __init spitzkbd_probe(struct device *dev)
{
- int i;
struct spitzkbd *spitzkbd;
+ struct input_dev *input_dev;
+ int i;
spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL);
if (!spitzkbd)
return -ENOMEM;
- dev_set_drvdata(dev,spitzkbd);
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ kfree(spitzkbd);
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(dev, spitzkbd);
strcpy(spitzkbd->phys, "spitzkbd/input0");
spin_lock_init(&spitzkbd->lock);
@@ -368,30 +373,34 @@
spitzkbd->htimer.function = spitzkbd_hinge_timer;
spitzkbd->htimer.data = (unsigned long) spitzkbd;
- spitzkbd->suspend_jiffies=jiffies;
+ spitzkbd->suspend_jiffies = jiffies;
- init_input_dev(&spitzkbd->input);
- spitzkbd->input.private = spitzkbd;
- spitzkbd->input.name = "Spitz Keyboard";
- spitzkbd->input.dev = dev;
- spitzkbd->input.phys = spitzkbd->phys;
- spitzkbd->input.id.bustype = BUS_HOST;
- spitzkbd->input.id.vendor = 0x0001;
- spitzkbd->input.id.product = 0x0001;
- spitzkbd->input.id.version = 0x0100;
- spitzkbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
- spitzkbd->input.keycode = spitzkbd->keycode;
- spitzkbd->input.keycodesize = sizeof(unsigned char);
- spitzkbd->input.keycodemax = ARRAY_SIZE(spitzkbd_keycode);
+ spitzkbd->input = input_dev;
+
+ input_dev->private = spitzkbd;
+ input_dev->name = "Spitz Keyboard";
+ input_dev->phys = spitzkbd->phys;
+ input_dev->cdev.dev = dev;
+
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
+ input_dev->keycode = spitzkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(spitzkbd_keycode);
memcpy(spitzkbd->keycode, spitzkbd_keycode, sizeof(spitzkbd->keycode));
for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
- set_bit(spitzkbd->keycode[i], spitzkbd->input.keybit);
- clear_bit(0, spitzkbd->input.keybit);
- set_bit(SW_0, spitzkbd->input.swbit);
- set_bit(SW_1, spitzkbd->input.swbit);
+ set_bit(spitzkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+ set_bit(SW_0, input_dev->swbit);
+ set_bit(SW_1, input_dev->swbit);
- input_register_device(&spitzkbd->input);
+ input_register_device(input_dev);
+
mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
@@ -444,7 +453,7 @@
del_timer_sync(&spitzkbd->htimer);
del_timer_sync(&spitzkbd->timer);
- input_unregister_device(&spitzkbd->input);
+ input_unregister_device(spitzkbd->input);
kfree(spitzkbd);
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index 4bae5d8..b15b6d8 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -76,13 +76,14 @@
struct sunkbd {
unsigned char keycode[128];
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
struct work_struct tq;
wait_queue_head_t wait;
char name[64];
char phys[32];
char type;
+ unsigned char enabled;
volatile s8 reset;
volatile s8 layout;
};
@@ -124,10 +125,13 @@
break;
default:
+ if (!sunkbd->enabled)
+ break;
+
if (sunkbd->keycode[data & SUNKBD_KEY]) {
- input_regs(&sunkbd->dev, regs);
- input_report_key(&sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE));
- input_sync(&sunkbd->dev);
+ input_regs(sunkbd->dev, regs);
+ input_report_key(sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE));
+ input_sync(sunkbd->dev);
} else {
printk(KERN_WARNING "sunkbd.c: Unknown key (scancode %#x) %s.\n",
data & SUNKBD_KEY, data & SUNKBD_RELEASE ? "released" : "pressed");
@@ -184,7 +188,7 @@
sunkbd->reset = -2;
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_RESET);
wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
- if (sunkbd->reset <0)
+ if (sunkbd->reset < 0)
return -1;
sunkbd->type = sunkbd->reset;
@@ -213,10 +217,17 @@
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
sunkbd->serio->write(sunkbd->serio,
- (!!test_bit(LED_CAPSL, sunkbd->dev.led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev.led) << 2) |
- (!!test_bit(LED_COMPOSE, sunkbd->dev.led) << 1) | !!test_bit(LED_NUML, sunkbd->dev.led));
- sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev.snd));
- sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev.snd));
+ (!!test_bit(LED_CAPSL, sunkbd->dev->led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) |
+ (!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) | !!test_bit(LED_NUML, sunkbd->dev->led));
+ sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd));
+ sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd));
+}
+
+static void sunkbd_enable(struct sunkbd *sunkbd, int enable)
+{
+ serio_pause_rx(sunkbd->serio);
+ sunkbd->enabled = 1;
+ serio_continue_rx(sunkbd->serio);
}
/*
@@ -226,70 +237,64 @@
static int sunkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct sunkbd *sunkbd;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
int i;
- int err;
- if (!(sunkbd = kmalloc(sizeof(struct sunkbd), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(sunkbd, 0, sizeof(struct sunkbd));
-
- init_input_dev(&sunkbd->dev);
- init_waitqueue_head(&sunkbd->wait);
-
- sunkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP);
- sunkbd->dev.ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML);
- sunkbd->dev.sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL);
+ sunkbd = kzalloc(sizeof(struct sunkbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!sunkbd || !input_dev)
+ goto fail;
sunkbd->serio = serio;
-
+ sunkbd->dev = input_dev;
+ init_waitqueue_head(&sunkbd->wait);
INIT_WORK(&sunkbd->tq, sunkbd_reinit, sunkbd);
-
- sunkbd->dev.keycode = sunkbd->keycode;
- sunkbd->dev.keycodesize = sizeof(unsigned char);
- sunkbd->dev.keycodemax = ARRAY_SIZE(sunkbd_keycode);
-
- sunkbd->dev.event = sunkbd_event;
- sunkbd->dev.private = sunkbd;
+ snprintf(sunkbd->phys, sizeof(sunkbd->phys), "%s/input0", serio->phys);
serio_set_drvdata(serio, sunkbd);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(sunkbd);
- return err;
- }
+ if (err)
+ goto fail;
if (sunkbd_initialize(sunkbd) < 0) {
serio_close(serio);
- serio_set_drvdata(serio, NULL);
- kfree(sunkbd);
- return -ENODEV;
+ goto fail;
}
sprintf(sunkbd->name, "Sun Type %d keyboard", sunkbd->type);
-
memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode));
+
+ input_dev->name = sunkbd->name;
+ input_dev->phys = sunkbd->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_SUNKBD;
+ input_dev->id.product = sunkbd->type;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = sunkbd;
+ input_dev->event = sunkbd_event;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP);
+ input_dev->ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML);
+ input_dev->sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL);
+
+ input_dev->keycode = sunkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(sunkbd_keycode);
for (i = 0; i < 128; i++)
- set_bit(sunkbd->keycode[i], sunkbd->dev.keybit);
- clear_bit(0, sunkbd->dev.keybit);
+ set_bit(sunkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
- sprintf(sunkbd->phys, "%s/input0", serio->phys);
-
- sunkbd->dev.name = sunkbd->name;
- sunkbd->dev.phys = sunkbd->phys;
- sunkbd->dev.id.bustype = BUS_RS232;
- sunkbd->dev.id.vendor = SERIO_SUNKBD;
- sunkbd->dev.id.product = sunkbd->type;
- sunkbd->dev.id.version = 0x0100;
- sunkbd->dev.dev = &serio->dev;
-
- input_register_device(&sunkbd->dev);
-
- printk(KERN_INFO "input: %s on %s\n", sunkbd->name, serio->phys);
-
+ sunkbd_enable(sunkbd, 1);
+ input_register_device(sunkbd->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(sunkbd);
+ return err;
}
/*
@@ -299,7 +304,9 @@
static void sunkbd_disconnect(struct serio *serio)
{
struct sunkbd *sunkbd = serio_get_drvdata(serio);
- input_unregister_device(&sunkbd->dev);
+
+ sunkbd_enable(sunkbd, 0);
+ input_unregister_device(sunkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(sunkbd);
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
index 19eaec7..4135e3e 100644
--- a/drivers/input/keyboard/xtkbd.c
+++ b/drivers/input/keyboard/xtkbd.c
@@ -56,11 +56,9 @@
106
};
-static char *xtkbd_name = "XT Keyboard";
-
struct xtkbd {
unsigned char keycode[256];
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
char phys[32];
};
@@ -77,9 +75,9 @@
default:
if (xtkbd->keycode[data & XTKBD_KEY]) {
- input_regs(&xtkbd->dev, regs);
- input_report_key(&xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE));
- input_sync(&xtkbd->dev);
+ input_regs(xtkbd->dev, regs);
+ input_report_key(xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE));
+ input_sync(xtkbd->dev);
} else {
printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n",
data & XTKBD_KEY, data & XTKBD_RELEASE ? "released" : "pressed");
@@ -91,62 +89,60 @@
static int xtkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct xtkbd *xtkbd;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
int i;
- int err;
- if (!(xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(xtkbd, 0, sizeof(struct xtkbd));
-
- xtkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!xtkbd || !input_dev)
+ goto fail;
xtkbd->serio = serio;
+ xtkbd->dev = input_dev;
+ sprintf(xtkbd->phys, "%s/input0", serio->phys);
+ memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode));
- init_input_dev(&xtkbd->dev);
- xtkbd->dev.keycode = xtkbd->keycode;
- xtkbd->dev.keycodesize = sizeof(unsigned char);
- xtkbd->dev.keycodemax = ARRAY_SIZE(xtkbd_keycode);
- xtkbd->dev.private = xtkbd;
+ input_dev->name = "XT Keyboard";
+ input_dev->phys = xtkbd->phys;
+ input_dev->id.bustype = BUS_XTKBD;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = xtkbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ input_dev->keycode = xtkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(xtkbd_keycode);
+
+ for (i = 0; i < 255; i++)
+ set_bit(xtkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
serio_set_drvdata(serio, xtkbd);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(xtkbd);
- return err;
- }
+ if (err)
+ goto fail;
- memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode));
- for (i = 0; i < 255; i++)
- set_bit(xtkbd->keycode[i], xtkbd->dev.keybit);
- clear_bit(0, xtkbd->dev.keybit);
-
- sprintf(xtkbd->phys, "%s/input0", serio->phys);
-
- xtkbd->dev.name = xtkbd_name;
- xtkbd->dev.phys = xtkbd->phys;
- xtkbd->dev.id.bustype = BUS_XTKBD;
- xtkbd->dev.id.vendor = 0x0001;
- xtkbd->dev.id.product = 0x0001;
- xtkbd->dev.id.version = 0x0100;
- xtkbd->dev.dev = &serio->dev;
-
- input_register_device(&xtkbd->dev);
-
- printk(KERN_INFO "input: %s on %s\n", xtkbd_name, serio->phys);
-
+ input_register_device(xtkbd->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(xtkbd);
+ return err;
}
static void xtkbd_disconnect(struct serio *serio)
{
struct xtkbd *xtkbd = serio_get_drvdata(serio);
- input_unregister_device(&xtkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(xtkbd->dev);
kfree(xtkbd);
}
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index bb934e6..b3eaac1 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -14,7 +14,7 @@
config INPUT_PCSPKR
tristate "PC Speaker support"
- depends on ALPHA || X86 || X86_64 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
+ depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
help
Say Y here if you want the standard PC Speaker to be used for
bells and whistles.
diff --git a/drivers/input/misc/m68kspkr.c b/drivers/input/misc/m68kspkr.c
index 64abdd9..04489ad 100644
--- a/drivers/input/misc/m68kspkr.c
+++ b/drivers/input/misc/m68kspkr.c
@@ -24,9 +24,7 @@
MODULE_DESCRIPTION("m68k beeper driver");
MODULE_LICENSE("GPL");
-static char m68kspkr_name[] = "m68k beeper";
-static char m68kspkr_phys[] = "m68k/generic";
-static struct input_dev m68kspkr_dev;
+static struct input_dev *m68kspkr_dev;
static int m68kspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
@@ -51,32 +49,34 @@
static int __init m68kspkr_init(void)
{
- if (!mach_beep){
- printk("%s: no lowlevel beep support\n", m68kspkr_name);
- return -1;
+ if (!mach_beep) {
+ printk(KERN_INFO "m68kspkr: no lowlevel beep support\n");
+ return -ENODEV;
}
- m68kspkr_dev.evbit[0] = BIT(EV_SND);
- m68kspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
- m68kspkr_dev.event = m68kspkr_event;
+ m68kspkr_dev = input_allocate_device();
+ if (!m68kspkr_dev)
+ return -ENOMEM;
- m68kspkr_dev.name = m68kspkr_name;
- m68kspkr_dev.phys = m68kspkr_phys;
- m68kspkr_dev.id.bustype = BUS_HOST;
- m68kspkr_dev.id.vendor = 0x001f;
- m68kspkr_dev.id.product = 0x0001;
- m68kspkr_dev.id.version = 0x0100;
+ m68kspkr_dev->name = "m68k beeper";
+ m68kspkr_dev->phys = "m68k/generic";
+ m68kspkr_dev->id.bustype = BUS_HOST;
+ m68kspkr_dev->id.vendor = 0x001f;
+ m68kspkr_dev->id.product = 0x0001;
+ m68kspkr_dev->id.version = 0x0100;
- input_register_device(&m68kspkr_dev);
+ m68kspkr_dev->evbit[0] = BIT(EV_SND);
+ m68kspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ m68kspkr_dev->event = m68kspkr_event;
- printk(KERN_INFO "input: %s\n", m68kspkr_name);
+ input_register_device(m68kspkr_dev);
return 0;
}
static void __exit m68kspkr_exit(void)
{
- input_unregister_device(&m68kspkr_dev);
+ input_unregister_device(m68kspkr_dev);
}
module_init(m68kspkr_init);
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 3013194..e34633c 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -23,9 +23,7 @@
MODULE_DESCRIPTION("PC Speaker beeper driver");
MODULE_LICENSE("GPL");
-static char pcspkr_name[] = "PC Speaker";
-static char pcspkr_phys[] = "isa0061/input0";
-static struct input_dev pcspkr_dev;
+static struct input_dev *pcspkr_dev;
static DEFINE_SPINLOCK(i8253_beep_lock);
@@ -68,27 +66,29 @@
static int __init pcspkr_init(void)
{
- pcspkr_dev.evbit[0] = BIT(EV_SND);
- pcspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
- pcspkr_dev.event = pcspkr_event;
+ pcspkr_dev = input_allocate_device();
+ if (!pcspkr_dev)
+ return -ENOMEM;
- pcspkr_dev.name = pcspkr_name;
- pcspkr_dev.phys = pcspkr_phys;
- pcspkr_dev.id.bustype = BUS_ISA;
- pcspkr_dev.id.vendor = 0x001f;
- pcspkr_dev.id.product = 0x0001;
- pcspkr_dev.id.version = 0x0100;
+ pcspkr_dev->name = "PC Speaker";
+ pcspkr_dev->name = "isa0061/input0";
+ pcspkr_dev->id.bustype = BUS_ISA;
+ pcspkr_dev->id.vendor = 0x001f;
+ pcspkr_dev->id.product = 0x0001;
+ pcspkr_dev->id.version = 0x0100;
- input_register_device(&pcspkr_dev);
+ pcspkr_dev->evbit[0] = BIT(EV_SND);
+ pcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ pcspkr_dev->event = pcspkr_event;
- printk(KERN_INFO "input: %s\n", pcspkr_name);
+ input_register_device(pcspkr_dev);
return 0;
}
static void __exit pcspkr_exit(void)
{
- input_unregister_device(&pcspkr_dev);
+ input_unregister_device(pcspkr_dev);
/* turn off the speaker */
pcspkr_event(NULL, EV_SND, SND_BELL, 0);
}
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index cdc3fb3..29d97b1 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -17,28 +17,24 @@
#endif
MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
-MODULE_DESCRIPTION("PC Speaker beeper driver");
+MODULE_DESCRIPTION("Sparc Speaker beeper driver");
MODULE_LICENSE("GPL");
static unsigned long beep_iobase;
-
-static char *sparcspkr_isa_name = "Sparc ISA Speaker";
-static char *sparcspkr_ebus_name = "Sparc EBUS Speaker";
-static char *sparcspkr_phys = "sparc/input0";
-static struct input_dev sparcspkr_dev;
+static struct input_dev *sparcspkr_dev;
DEFINE_SPINLOCK(beep_lock);
static void __init init_sparcspkr_struct(void)
{
- sparcspkr_dev.evbit[0] = BIT(EV_SND);
- sparcspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ sparcspkr_dev->evbit[0] = BIT(EV_SND);
+ sparcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
- sparcspkr_dev.phys = sparcspkr_phys;
- sparcspkr_dev.id.bustype = BUS_ISA;
- sparcspkr_dev.id.vendor = 0x001f;
- sparcspkr_dev.id.product = 0x0001;
- sparcspkr_dev.id.version = 0x0100;
+ sparcspkr_dev->phys = "sparc/input0";
+ sparcspkr_dev->id.bustype = BUS_ISA;
+ sparcspkr_dev->id.vendor = 0x001f;
+ sparcspkr_dev->id.product = 0x0001;
+ sparcspkr_dev->id.version = 0x0100;
}
static int ebus_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
@@ -84,14 +80,15 @@
{
beep_iobase = edev->resource[0].start;
- init_sparcspkr_struct();
+ sparcspkr_dev = input_allocate_device();
+ if (!sparcspkr_dev)
+ return -ENOMEM;
- sparcspkr_dev.name = sparcspkr_ebus_name;
- sparcspkr_dev.event = ebus_spkr_event;
+ sparcspkr_dev->name = "Sparc EBUS Speaker";
+ sparcspkr_dev->event = ebus_spkr_event;
- input_register_device(&sparcspkr_dev);
+ input_register_device(sparcspkr_dev);
- printk(KERN_INFO "input: %s\n", sparcspkr_ebus_name);
return 0;
}
@@ -137,15 +134,17 @@
{
beep_iobase = isa_dev->resource.start;
+ sparcspkr_dev = input_allocate_device();
+ if (!sparcspkr_dev)
+ return -ENOMEM;
+
init_sparcspkr_struct();
- sparcspkr_dev.name = sparcspkr_isa_name;
- sparcspkr_dev.event = isa_spkr_event;
- sparcspkr_dev.id.bustype = BUS_ISA;
+ sparcspkr_dev->name = "Sparc ISA Speaker";
+ sparcspkr_dev->event = isa_spkr_event;
- input_register_device(&sparcspkr_dev);
+ input_register_device(sparcspkr_dev);
- printk(KERN_INFO "input: %s\n", sparcspkr_isa_name);
return 0;
}
#endif
@@ -182,7 +181,7 @@
static void __exit sparcspkr_exit(void)
{
- input_unregister_device(&sparcspkr_dev);
+ input_unregister_device(sparcspkr_dev);
}
module_init(sparcspkr_init);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index b20783f..4acc7fd 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -79,8 +79,8 @@
{
struct alps_data *priv = psmouse->private;
unsigned char *packet = psmouse->packet;
- struct input_dev *dev = &psmouse->dev;
- struct input_dev *dev2 = &priv->dev2;
+ struct input_dev *dev = psmouse->dev;
+ struct input_dev *dev2 = priv->dev2;
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
@@ -379,20 +379,24 @@
static void alps_disconnect(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
+
psmouse_reset(psmouse);
- input_unregister_device(&priv->dev2);
+ input_unregister_device(priv->dev2);
kfree(priv);
}
int alps_init(struct psmouse *psmouse)
{
struct alps_data *priv;
+ struct input_dev *dev1 = psmouse->dev, *dev2;
int version;
- psmouse->private = priv = kmalloc(sizeof(struct alps_data), GFP_KERNEL);
- if (!priv)
+ psmouse->private = priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
+ dev2 = input_allocate_device();
+ if (!priv || !dev2)
goto init_fail;
- memset(priv, 0, sizeof(struct alps_data));
+
+ priv->dev2 = dev2;
if (!(priv->i = alps_get_model(psmouse, &version)))
goto init_fail;
@@ -411,41 +415,39 @@
if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
goto init_fail;
- psmouse->dev.evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
- psmouse->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- psmouse->dev.keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
- psmouse->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+ dev1->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ dev1->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
+ dev1->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- psmouse->dev.evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
- input_set_abs_params(&psmouse->dev, ABS_X, 0, 1023, 0, 0);
- input_set_abs_params(&psmouse->dev, ABS_Y, 0, 767, 0, 0);
- input_set_abs_params(&psmouse->dev, ABS_PRESSURE, 0, 127, 0, 0);
+ dev1->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+ input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+ input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
if (priv->i->flags & ALPS_WHEEL) {
- psmouse->dev.evbit[LONG(EV_REL)] |= BIT(EV_REL);
- psmouse->dev.relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL);
+ dev1->evbit[LONG(EV_REL)] |= BIT(EV_REL);
+ dev1->relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL);
}
if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
- psmouse->dev.keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD);
- psmouse->dev.keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK);
+ dev1->keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD);
+ dev1->keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK);
}
sprintf(priv->phys, "%s/input1", psmouse->ps2dev.serio->phys);
- priv->dev2.phys = priv->phys;
- priv->dev2.name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
- priv->dev2.id.bustype = BUS_I8042;
- priv->dev2.id.vendor = 0x0002;
- priv->dev2.id.product = PSMOUSE_ALPS;
- priv->dev2.id.version = 0x0000;
+ dev2->phys = priv->phys;
+ dev2->name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
+ dev2->id.bustype = BUS_I8042;
+ dev2->id.vendor = 0x0002;
+ dev2->id.product = PSMOUSE_ALPS;
+ dev2->id.version = 0x0000;
- priv->dev2.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- priv->dev2.relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y);
- priv->dev2.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ dev2->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ dev2->relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y);
+ dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- input_register_device(&priv->dev2);
-
- printk(KERN_INFO "input: %s on %s\n", priv->dev2.name, psmouse->ps2dev.serio->phys);
+ input_register_device(priv->dev2);
psmouse->protocol_handler = alps_process_byte;
psmouse->disconnect = alps_disconnect;
@@ -455,6 +457,7 @@
return 0;
init_fail:
+ input_free_device(dev2);
kfree(priv);
return -1;
}
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index aba103d..e428f8d 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -22,7 +22,7 @@
};
struct alps_data {
- struct input_dev dev2; /* Relative device */
+ struct input_dev *dev2; /* Relative device */
char name[32]; /* Name */
char phys[32]; /* Phys */
struct alps_model_info *i; /* Info */
diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c
index e994849..d13d4c8 100644
--- a/drivers/input/mouse/amimouse.c
+++ b/drivers/input/mouse/amimouse.c
@@ -34,10 +34,7 @@
MODULE_LICENSE("GPL");
static int amimouse_lastx, amimouse_lasty;
-static struct input_dev amimouse_dev;
-
-static char *amimouse_name = "Amiga mouse";
-static char *amimouse_phys = "amimouse/input0";
+static struct input_dev *amimouse_dev;
static irqreturn_t amimouse_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
@@ -62,16 +59,16 @@
potgor = custom.potgor;
- input_regs(&amimouse_dev, fp);
+ input_regs(amimouse_dev, fp);
- input_report_rel(&amimouse_dev, REL_X, dx);
- input_report_rel(&amimouse_dev, REL_Y, dy);
+ input_report_rel(amimouse_dev, REL_X, dx);
+ input_report_rel(amimouse_dev, REL_Y, dy);
- input_report_key(&amimouse_dev, BTN_LEFT, ciaa.pra & 0x40);
- input_report_key(&amimouse_dev, BTN_MIDDLE, potgor & 0x0100);
- input_report_key(&amimouse_dev, BTN_RIGHT, potgor & 0x0400);
+ input_report_key(amimouse_dev, BTN_LEFT, ciaa.pra & 0x40);
+ input_report_key(amimouse_dev, BTN_MIDDLE, potgor & 0x0100);
+ input_report_key(amimouse_dev, BTN_RIGHT, potgor & 0x0400);
- input_sync(&amimouse_dev);
+ input_sync(amimouse_dev);
return IRQ_HANDLED;
}
@@ -103,28 +100,30 @@
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
return -ENODEV;
- amimouse_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- amimouse_dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- amimouse_dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- amimouse_dev.open = amimouse_open;
- amimouse_dev.close = amimouse_close;
+ if (!(amimouse_dev = input_allocate_device()))
+ return -ENOMEM;
- amimouse_dev.name = amimouse_name;
- amimouse_dev.phys = amimouse_phys;
- amimouse_dev.id.bustype = BUS_AMIGA;
- amimouse_dev.id.vendor = 0x0001;
- amimouse_dev.id.product = 0x0002;
- amimouse_dev.id.version = 0x0100;
+ amimouse_dev->name = "Amiga mouse";
+ amimouse_dev->phys = "amimouse/input0";
+ amimouse_dev->id.bustype = BUS_AMIGA;
+ amimouse_dev->id.vendor = 0x0001;
+ amimouse_dev->id.product = 0x0002;
+ amimouse_dev->id.version = 0x0100;
- input_register_device(&amimouse_dev);
+ amimouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ amimouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ amimouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ amimouse_dev->open = amimouse_open;
+ amimouse_dev->close = amimouse_close;
- printk(KERN_INFO "input: %s at joy0dat\n", amimouse_name);
+ input_register_device(amimouse_dev);
+
return 0;
}
static void __exit amimouse_exit(void)
{
- input_unregister_device(&amimouse_dev);
+ input_unregister_device(amimouse_dev);
}
module_init(amimouse_init);
diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c
index bc22849..c2bf2ed 100644
--- a/drivers/input/mouse/hil_ptr.c
+++ b/drivers/input/mouse/hil_ptr.c
@@ -196,7 +196,7 @@
hil_packet packet;
int idx;
- ptr = (struct hil_ptr *)serio->private;
+ ptr = serio_get_drvdata(serio);
if (ptr == NULL) {
BUG();
return IRQ_HANDLED;
@@ -227,7 +227,7 @@
{
struct hil_ptr *ptr;
- ptr = (struct hil_ptr *)serio->private;
+ ptr = serio_get_drvdata(serio);
if (ptr == NULL) {
BUG();
return;
@@ -238,21 +238,19 @@
kfree(ptr);
}
-static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
+static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
{
struct hil_ptr *ptr;
char *txt;
unsigned int i, naxsets, btntype;
uint8_t did, *idd;
- if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return;
-
- if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return;
+ if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return -ENOMEM;
memset(ptr, 0, sizeof(struct hil_ptr));
if (serio_open(serio, driver)) goto bail0;
- serio->private = ptr;
+ serio_set_drvdata(serio, ptr);
ptr->serio = serio;
ptr->dev.private = ptr;
@@ -380,23 +378,34 @@
(btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad",
did);
- return;
+ return 0;
bail1:
serio_close(serio);
bail0:
kfree(ptr);
- return;
+ serio_set_drvdata(serio, NULL);
+ return -ENODEV;
}
+static struct serio_device_id hil_ptr_ids[] = {
+ {
+ .type = SERIO_HIL_MLC,
+ .proto = SERIO_HIL,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
static struct serio_driver hil_ptr_serio_driver = {
.driver = {
.name = "hil_ptr",
},
.description = "HP HIL mouse/tablet driver",
- .connect = hil_ptr_connect,
- .disconnect = hil_ptr_disconnect,
- .interrupt = hil_ptr_interrupt
+ .id_table = hil_ptr_ids,
+ .connect = hil_ptr_connect,
+ .disconnect = hil_ptr_disconnect,
+ .interrupt = hil_ptr_interrupt
};
static int __init hil_ptr_init(void)
diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
index 1f62c01..afc66f5 100644
--- a/drivers/input/mouse/inport.c
+++ b/drivers/input/mouse/inport.c
@@ -87,7 +87,36 @@
__obsolete_setup("inport_irq=");
-static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct input_dev *inport_dev;
+
+static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned char buttons;
+
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+ input_regs(inport_dev, regs);
+
+ outb(INPORT_REG_X, INPORT_CONTROL_PORT);
+ input_report_rel(inport_dev, REL_X, inb(INPORT_DATA_PORT));
+
+ outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
+ input_report_rel(inport_dev, REL_Y, inb(INPORT_DATA_PORT));
+
+ outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
+ buttons = inb(INPORT_DATA_PORT);
+
+ input_report_key(inport_dev, BTN_MIDDLE, buttons & 1);
+ input_report_key(inport_dev, BTN_LEFT, buttons & 2);
+ input_report_key(inport_dev, BTN_RIGHT, buttons & 4);
+
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+ input_sync(inport_dev);
+ return IRQ_HANDLED;
+}
static int inport_open(struct input_dev *dev)
{
@@ -106,54 +135,9 @@
free_irq(inport_irq, NULL);
}
-static struct input_dev inport_dev = {
- .evbit = { BIT(EV_KEY) | BIT(EV_REL) },
- .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
- .relbit = { BIT(REL_X) | BIT(REL_Y) },
- .open = inport_open,
- .close = inport_close,
- .name = INPORT_NAME,
- .phys = "isa023c/input0",
- .id = {
- .bustype = BUS_ISA,
- .vendor = INPORT_VENDOR,
- .product = 0x0001,
- .version = 0x0100,
- },
-};
-
-static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned char buttons;
-
- outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
- outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
-
- input_regs(&inport_dev, regs);
-
- outb(INPORT_REG_X, INPORT_CONTROL_PORT);
- input_report_rel(&inport_dev, REL_X, inb(INPORT_DATA_PORT));
-
- outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
- input_report_rel(&inport_dev, REL_Y, inb(INPORT_DATA_PORT));
-
- outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
- buttons = inb(INPORT_DATA_PORT);
-
- input_report_key(&inport_dev, BTN_MIDDLE, buttons & 1);
- input_report_key(&inport_dev, BTN_LEFT, buttons & 2);
- input_report_key(&inport_dev, BTN_RIGHT, buttons & 4);
-
- outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
- outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
-
- input_sync(&inport_dev);
- return IRQ_HANDLED;
-}
-
static int __init inport_init(void)
{
- unsigned char a,b,c;
+ unsigned char a, b, c;
if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
@@ -163,26 +147,44 @@
a = inb(INPORT_SIGNATURE_PORT);
b = inb(INPORT_SIGNATURE_PORT);
c = inb(INPORT_SIGNATURE_PORT);
- if (( a == b ) || ( a != c )) {
+ if (a == b || a != c) {
release_region(INPORT_BASE, INPORT_EXTENT);
printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
return -ENODEV;
}
+ if (!(inport_dev = input_allocate_device())) {
+ printk(KERN_ERR "inport.c: Not enough memory for input device\n");
+ release_region(INPORT_BASE, INPORT_EXTENT);
+ return -ENOMEM;
+ }
+
+ inport_dev->name = INPORT_NAME;
+ inport_dev->phys = "isa023c/input0";
+ inport_dev->id.bustype = BUS_ISA;
+ inport_dev->id.vendor = INPORT_VENDOR;
+ inport_dev->id.product = 0x0001;
+ inport_dev->id.version = 0x0100;
+
+ inport_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ inport_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ inport_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+
+ inport_dev->open = inport_open;
+ inport_dev->close = inport_close;
+
outb(INPORT_RESET, INPORT_CONTROL_PORT);
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
- input_register_device(&inport_dev);
-
- printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n", INPORT_BASE, inport_irq);
+ input_register_device(inport_dev);
return 0;
}
static void __exit inport_exit(void)
{
- input_unregister_device(&inport_dev);
+ input_unregister_device(inport_dev);
release_region(INPORT_BASE, INPORT_EXTENT);
}
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index bd9df9b..5599142 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -34,7 +34,7 @@
static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
unsigned char *packet = psmouse->packet;
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
if (psmouse->pktcnt != 3)
return PSMOUSE_GOOD_DATA;
@@ -113,15 +113,17 @@
int lifebook_init(struct psmouse *psmouse)
{
+ struct input_dev *input_dev = psmouse->dev;
+
if (lifebook_absolute_mode(psmouse))
return -1;
- psmouse->dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL);
- psmouse->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- psmouse->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- input_set_abs_params(&psmouse->dev, ABS_X, 0, 1024, 0, 0);
- input_set_abs_params(&psmouse->dev, ABS_Y, 0, 1024, 0, 0);
+ input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_set_abs_params(input_dev, ABS_X, 0, 1024, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 1024, 0, 0);
psmouse->protocol_handler = lifebook_process_byte;
psmouse->set_resolution = lifebook_set_resolution;
diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c
index 8b52431..9c7ce38 100644
--- a/drivers/input/mouse/logibm.c
+++ b/drivers/input/mouse/logibm.c
@@ -77,39 +77,7 @@
__obsolete_setup("logibm_irq=");
-static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-
-static int logibm_open(struct input_dev *dev)
-{
- if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
- printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
- return -EBUSY;
- }
- outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
- return 0;
-}
-
-static void logibm_close(struct input_dev *dev)
-{
- outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
- free_irq(logibm_irq, NULL);
-}
-
-static struct input_dev logibm_dev = {
- .evbit = { BIT(EV_KEY) | BIT(EV_REL) },
- .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
- .relbit = { BIT(REL_X) | BIT(REL_Y) },
- .open = logibm_open,
- .close = logibm_close,
- .name = "Logitech bus mouse",
- .phys = "isa023c/input0",
- .id = {
- .bustype = BUS_ISA,
- .vendor = 0x0003,
- .product = 0x0001,
- .version = 0x0100,
- },
-};
+static struct input_dev *logibm_dev;
static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -127,18 +95,34 @@
dy |= (buttons & 0xf) << 4;
buttons = ~buttons >> 5;
- input_regs(&logibm_dev, regs);
- input_report_rel(&logibm_dev, REL_X, dx);
- input_report_rel(&logibm_dev, REL_Y, dy);
- input_report_key(&logibm_dev, BTN_RIGHT, buttons & 1);
- input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 2);
- input_report_key(&logibm_dev, BTN_LEFT, buttons & 4);
- input_sync(&logibm_dev);
+ input_regs(logibm_dev, regs);
+ input_report_rel(logibm_dev, REL_X, dx);
+ input_report_rel(logibm_dev, REL_Y, dy);
+ input_report_key(logibm_dev, BTN_RIGHT, buttons & 1);
+ input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2);
+ input_report_key(logibm_dev, BTN_LEFT, buttons & 4);
+ input_sync(logibm_dev);
outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
return IRQ_HANDLED;
}
+static int logibm_open(struct input_dev *dev)
+{
+ if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
+ printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
+ return -EBUSY;
+ }
+ outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
+ return 0;
+}
+
+static void logibm_close(struct input_dev *dev)
+{
+ outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
+ free_irq(logibm_irq, NULL);
+}
+
static int __init logibm_init(void)
{
if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) {
@@ -159,16 +143,34 @@
outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
- input_register_device(&logibm_dev);
+ if (!(logibm_dev = input_allocate_device())) {
+ printk(KERN_ERR "logibm.c: Not enough memory for input device\n");
+ release_region(LOGIBM_BASE, LOGIBM_EXTENT);
+ return -ENOMEM;
+ }
- printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq);
+ logibm_dev->name = "Logitech bus mouse";
+ logibm_dev->phys = "isa023c/input0";
+ logibm_dev->id.bustype = BUS_ISA;
+ logibm_dev->id.vendor = 0x0003;
+ logibm_dev->id.product = 0x0001;
+ logibm_dev->id.version = 0x0100;
+
+ logibm_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ logibm_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ logibm_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+
+ logibm_dev->open = logibm_open;
+ logibm_dev->close = logibm_close;
+
+ input_register_device(logibm_dev);
return 0;
}
static void __exit logibm_exit(void)
{
- input_unregister_device(&logibm_dev);
+ input_unregister_device(logibm_dev);
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
}
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 7df9652..0f69ff4 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -40,7 +40,7 @@
static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
if (psmouse->pktcnt < 3)
@@ -257,25 +257,27 @@
static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_info *model_info,
int using_ps2pp)
{
+ struct input_dev *input_dev = psmouse->dev;
+
if (model_info->features & PS2PP_SIDE_BTN)
- set_bit(BTN_SIDE, psmouse->dev.keybit);
+ set_bit(BTN_SIDE, input_dev->keybit);
if (model_info->features & PS2PP_EXTRA_BTN)
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
+ set_bit(BTN_EXTRA, input_dev->keybit);
if (model_info->features & PS2PP_TASK_BTN)
- set_bit(BTN_TASK, psmouse->dev.keybit);
+ set_bit(BTN_TASK, input_dev->keybit);
if (model_info->features & PS2PP_NAV_BTN) {
- set_bit(BTN_FORWARD, psmouse->dev.keybit);
- set_bit(BTN_BACK, psmouse->dev.keybit);
+ set_bit(BTN_FORWARD, input_dev->keybit);
+ set_bit(BTN_BACK, input_dev->keybit);
}
if (model_info->features & PS2PP_WHEEL)
- set_bit(REL_WHEEL, psmouse->dev.relbit);
+ set_bit(REL_WHEEL, input_dev->relbit);
if (model_info->features & PS2PP_HWHEEL)
- set_bit(REL_HWHEEL, psmouse->dev.relbit);
+ set_bit(REL_HWHEEL, input_dev->relbit);
switch (model_info->kind) {
case PS2PP_KIND_WHEEL:
@@ -387,7 +389,7 @@
}
if (buttons < 3)
- clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
+ clear_bit(BTN_MIDDLE, psmouse->dev->keybit);
if (model_info)
ps2pp_set_model_properties(psmouse, model_info, use_ps2pp);
diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c
index e90c60c..b5b34fe 100644
--- a/drivers/input/mouse/maplemouse.c
+++ b/drivers/input/mouse/maplemouse.c
@@ -41,13 +41,12 @@
unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
struct input_dev *input_dev;
- if (!(input_dev = kmalloc(sizeof(struct input_dev), GFP_KERNEL)))
- return -1;
+ dev->private_data = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
dev->private_data = input_dev;
- memset(input_dev, 0, sizeof(struct dc_mouse));
- init_input_dev(input_dev);
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL);
@@ -59,8 +58,6 @@
maple_getcond_callback(dev, dc_mouse_callback, 1, MAPLE_FUNC_MOUSE);
- printk(KERN_INFO "input: mouse(0x%lx): %s\n", data, input_dev->name);
-
return 0;
}
@@ -70,7 +67,6 @@
struct input_dev *input_dev = dev->private_data;
input_unregister_device(input_dev);
- kfree(input_dev);
}
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index 93393d5..d284ea7 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -53,13 +53,10 @@
static int pc110pad_irq = 10;
static int pc110pad_io = 0x15e0;
-static struct input_dev pc110pad_dev;
+static struct input_dev *pc110pad_dev;
static int pc110pad_data[3];
static int pc110pad_count;
-static char *pc110pad_name = "IBM PC110 TouchPad";
-static char *pc110pad_phys = "isa15e0/input0";
-
static irqreturn_t pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs)
{
int value = inb_p(pc110pad_io);
@@ -74,14 +71,14 @@
if (pc110pad_count < 3)
return IRQ_HANDLED;
- input_regs(&pc110pad_dev, regs);
- input_report_key(&pc110pad_dev, BTN_TOUCH,
+ input_regs(pc110pad_dev, regs);
+ input_report_key(pc110pad_dev, BTN_TOUCH,
pc110pad_data[0] & 0x01);
- input_report_abs(&pc110pad_dev, ABS_X,
+ input_report_abs(pc110pad_dev, ABS_X,
pc110pad_data[1] | ((pc110pad_data[0] << 3) & 0x80) | ((pc110pad_data[0] << 1) & 0x100));
- input_report_abs(&pc110pad_dev, ABS_Y,
+ input_report_abs(pc110pad_dev, ABS_Y,
pc110pad_data[2] | ((pc110pad_data[0] << 4) & 0x80));
- input_sync(&pc110pad_dev);
+ input_sync(pc110pad_dev);
pc110pad_count = 0;
return IRQ_HANDLED;
@@ -94,9 +91,9 @@
static int pc110pad_open(struct input_dev *dev)
{
- pc110pad_interrupt(0,NULL,NULL);
- pc110pad_interrupt(0,NULL,NULL);
- pc110pad_interrupt(0,NULL,NULL);
+ pc110pad_interrupt(0, NULL, NULL);
+ pc110pad_interrupt(0, NULL, NULL);
+ pc110pad_interrupt(0, NULL, NULL);
outb(PC110PAD_ON, pc110pad_io + 2);
pc110pad_count = 0;
@@ -127,45 +124,46 @@
outb(PC110PAD_OFF, pc110pad_io + 2);
- if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL))
- {
+ if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) {
release_region(pc110pad_io, 4);
printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq);
return -EBUSY;
}
- pc110pad_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- pc110pad_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- pc110pad_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ if (!(pc110pad_dev = input_allocate_device())) {
+ free_irq(pc110pad_irq, NULL);
+ release_region(pc110pad_io, 4);
+ printk(KERN_ERR "pc110pad: Not enough memory.\n");
+ return -ENOMEM;
+ }
- pc110pad_dev.absmax[ABS_X] = 0x1ff;
- pc110pad_dev.absmax[ABS_Y] = 0x0ff;
+ pc110pad_dev->name = "IBM PC110 TouchPad";
+ pc110pad_dev->phys = "isa15e0/input0";
+ pc110pad_dev->id.bustype = BUS_ISA;
+ pc110pad_dev->id.vendor = 0x0003;
+ pc110pad_dev->id.product = 0x0001;
+ pc110pad_dev->id.version = 0x0100;
- pc110pad_dev.open = pc110pad_open;
- pc110pad_dev.close = pc110pad_close;
+ pc110pad_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ pc110pad_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+ pc110pad_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- pc110pad_dev.name = pc110pad_name;
- pc110pad_dev.phys = pc110pad_phys;
- pc110pad_dev.id.bustype = BUS_ISA;
- pc110pad_dev.id.vendor = 0x0003;
- pc110pad_dev.id.product = 0x0001;
- pc110pad_dev.id.version = 0x0100;
+ pc110pad_dev->absmax[ABS_X] = 0x1ff;
+ pc110pad_dev->absmax[ABS_Y] = 0x0ff;
- input_register_device(&pc110pad_dev);
+ pc110pad_dev->open = pc110pad_open;
+ pc110pad_dev->close = pc110pad_close;
- printk(KERN_INFO "input: %s at %#x irq %d\n",
- pc110pad_name, pc110pad_io, pc110pad_irq);
+ input_register_device(pc110pad_dev);
return 0;
}
static void __exit pc110pad_exit(void)
{
- input_unregister_device(&pc110pad_dev);
-
outb(PC110PAD_OFF, pc110pad_io + 2);
-
free_irq(pc110pad_irq, NULL);
+ input_unregister_device(pc110pad_dev);
release_region(pc110pad_io, 4);
}
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index af24313..6ee9999 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -114,7 +114,7 @@
static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
if (psmouse->pktcnt < psmouse->pktsize)
@@ -333,12 +333,11 @@
return -1;
if (set_properties) {
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
- set_bit(BTN_SIDE, psmouse->dev.keybit);
- set_bit(REL_WHEEL, psmouse->dev.relbit);
+ set_bit(BTN_EXTRA, psmouse->dev->keybit);
+ set_bit(BTN_SIDE, psmouse->dev->keybit);
+ set_bit(REL_WHEEL, psmouse->dev->relbit);
psmouse->vendor = "Genius";
- psmouse->name = "Wheel Mouse";
psmouse->pktsize = 4;
}
@@ -365,8 +364,8 @@
return -1;
if (set_properties) {
- set_bit(BTN_MIDDLE, psmouse->dev.keybit);
- set_bit(REL_WHEEL, psmouse->dev.relbit);
+ set_bit(BTN_MIDDLE, psmouse->dev->keybit);
+ set_bit(REL_WHEEL, psmouse->dev->relbit);
if (!psmouse->vendor) psmouse->vendor = "Generic";
if (!psmouse->name) psmouse->name = "Wheel Mouse";
@@ -398,10 +397,10 @@
return -1;
if (set_properties) {
- set_bit(BTN_MIDDLE, psmouse->dev.keybit);
- set_bit(REL_WHEEL, psmouse->dev.relbit);
- set_bit(BTN_SIDE, psmouse->dev.keybit);
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
+ set_bit(BTN_MIDDLE, psmouse->dev->keybit);
+ set_bit(REL_WHEEL, psmouse->dev->relbit);
+ set_bit(BTN_SIDE, psmouse->dev->keybit);
+ set_bit(BTN_EXTRA, psmouse->dev->keybit);
if (!psmouse->vendor) psmouse->vendor = "Generic";
if (!psmouse->name) psmouse->name = "Explorer Mouse";
@@ -433,7 +432,7 @@
return -1;
if (set_properties) {
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
+ set_bit(BTN_EXTRA, psmouse->dev->keybit);
psmouse->vendor = "Kensington";
psmouse->name = "ThinkingMouse";
@@ -839,9 +838,9 @@
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- input_unregister_device(&psmouse->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(psmouse->dev);
kfree(psmouse);
if (parent)
@@ -852,16 +851,14 @@
static int psmouse_switch_protocol(struct psmouse *psmouse, struct psmouse_protocol *proto)
{
- memset(&psmouse->dev, 0, sizeof(struct input_dev));
+ struct input_dev *input_dev = psmouse->dev;
- init_input_dev(&psmouse->dev);
+ input_dev->private = psmouse;
+ input_dev->cdev.dev = &psmouse->ps2dev.serio->dev;
- psmouse->dev.private = psmouse;
- psmouse->dev.dev = &psmouse->ps2dev.serio->dev;
-
- psmouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- psmouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
psmouse->set_rate = psmouse_set_rate;
psmouse->set_resolution = psmouse_set_resolution;
@@ -883,12 +880,12 @@
sprintf(psmouse->devname, "%s %s %s",
psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name);
- psmouse->dev.name = psmouse->devname;
- psmouse->dev.phys = psmouse->phys;
- psmouse->dev.id.bustype = BUS_I8042;
- psmouse->dev.id.vendor = 0x0002;
- psmouse->dev.id.product = psmouse->type;
- psmouse->dev.id.version = psmouse->model;
+ input_dev->name = psmouse->devname;
+ input_dev->phys = psmouse->phys;
+ input_dev->id.bustype = BUS_I8042;
+ input_dev->id.vendor = 0x0002;
+ input_dev->id.product = psmouse->type;
+ input_dev->id.version = psmouse->model;
return 0;
}
@@ -900,7 +897,8 @@
static int psmouse_connect(struct serio *serio, struct serio_driver *drv)
{
struct psmouse *psmouse, *parent = NULL;
- int retval;
+ struct input_dev *input_dev;
+ int retval = -ENOMEM;
down(&psmouse_sem);
@@ -913,12 +911,13 @@
psmouse_deactivate(parent);
}
- if (!(psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL))) {
- retval = -ENOMEM;
+ psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!psmouse || !input_dev)
goto out;
- }
ps2_init(&psmouse->ps2dev, serio);
+ psmouse->dev = input_dev;
sprintf(psmouse->phys, "%s/input0", serio->phys);
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
@@ -926,16 +925,11 @@
serio_set_drvdata(serio, psmouse);
retval = serio_open(serio, drv);
- if (retval) {
- serio_set_drvdata(serio, NULL);
- kfree(psmouse);
+ if (retval)
goto out;
- }
if (psmouse_probe(psmouse) < 0) {
serio_close(serio);
- serio_set_drvdata(serio, NULL);
- kfree(psmouse);
retval = -ENODEV;
goto out;
}
@@ -947,13 +941,11 @@
psmouse_switch_protocol(psmouse, NULL);
- input_register_device(&psmouse->dev);
- printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys);
-
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
-
psmouse_initialize(psmouse);
+ input_register_device(psmouse->dev);
+
if (parent && parent->pt_activate)
parent->pt_activate(parent);
@@ -964,6 +956,12 @@
retval = 0;
out:
+ if (retval) {
+ serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(psmouse);
+ }
+
/* If this is a pass-through port the parent needs to be re-activated */
if (parent)
psmouse_activate(parent);
@@ -1161,6 +1159,7 @@
{
struct serio *serio = psmouse->ps2dev.serio;
struct psmouse *parent = NULL;
+ struct input_dev *new_dev;
struct psmouse_protocol *proto;
int retry = 0;
@@ -1170,9 +1169,13 @@
if (psmouse->type == proto->type)
return count;
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+
while (serio->child) {
if (++retry > 3) {
printk(KERN_WARNING "psmouse: failed to destroy child port, protocol change aborted.\n");
+ input_free_device(new_dev);
return -EIO;
}
@@ -1182,11 +1185,15 @@
serio_pin_driver_uninterruptible(serio);
down(&psmouse_sem);
- if (serio->drv != &psmouse_drv)
+ if (serio->drv != &psmouse_drv) {
+ input_free_device(new_dev);
return -ENODEV;
+ }
- if (psmouse->type == proto->type)
+ if (psmouse->type == proto->type) {
+ input_free_device(new_dev);
return count; /* switched by other thread */
+ }
}
if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) {
@@ -1199,8 +1206,9 @@
psmouse->disconnect(psmouse);
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- input_unregister_device(&psmouse->dev);
+ input_unregister_device(psmouse->dev);
+ psmouse->dev = new_dev;
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
if (psmouse_switch_protocol(psmouse, proto) < 0) {
@@ -1212,8 +1220,7 @@
psmouse_initialize(psmouse);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
- input_register_device(&psmouse->dev);
- printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys);
+ input_register_device(psmouse->dev);
if (parent && parent->pt_activate)
parent->pt_activate(parent);
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 45d2bd7..7c4192b 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -36,7 +36,7 @@
struct psmouse {
void *private;
- struct input_dev dev;
+ struct input_dev *dev;
struct ps2dev ps2dev;
char *vendor;
char *name;
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 8fe1212..09b6ffd 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -34,20 +34,7 @@
MODULE_LICENSE("GPL");
static short rpcmouse_lastx, rpcmouse_lasty;
-
-static struct input_dev rpcmouse_dev = {
- .evbit = { BIT(EV_KEY) | BIT(EV_REL) },
- .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
- .relbit = { BIT(REL_X) | BIT(REL_Y) },
- .name = "Acorn RiscPC Mouse",
- .phys = "rpcmouse/input0",
- .id = {
- .bustype = BUS_HOST,
- .vendor = 0x0005,
- .product = 0x0001,
- .version = 0x0100,
- },
-};
+static struct input_dev *rpcmouse_dev;
static irqreturn_t rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -78,29 +65,41 @@
return IRQ_HANDLED;
}
+
static int __init rpcmouse_init(void)
{
- init_input_dev(&rpcmouse_dev);
+ if (!(rpcmouse_dev = input_allocate_device()))
+ return -ENOMEM;
+
+ rpcmouse_dev->name = "Acorn RiscPC Mouse";
+ rpcmouse_dev->phys = "rpcmouse/input0";
+ rpcmouse_dev->id.bustype = BUS_HOST;
+ rpcmouse_dev->id.vendor = 0x0005;
+ rpcmouse_dev->id.product = 0x0001;
+ rpcmouse_dev->id.version = 0x0100;
+
+ rpcmouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ rpcmouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ rpcmouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
rpcmouse_lastx = (short) iomd_readl(IOMD_MOUSEX);
rpcmouse_lasty = (short) iomd_readl(IOMD_MOUSEY);
- if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", &rpcmouse_dev)) {
+ if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", rpcmouse_dev)) {
printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n");
- return -1;
+ input_free_device(rpcmouse_dev);
+ return -EBUSY;
}
- input_register_device(&rpcmouse_dev);
-
- printk(KERN_INFO "input: Acorn RiscPC mouse\n");
+ input_register_device(rpcmouse_dev);
return 0;
}
static void __exit rpcmouse_exit(void)
{
- input_unregister_device(&rpcmouse_dev);
- free_irq(IRQ_VSYNCPULSE, &rpcmouse_dev);
+ free_irq(IRQ_VSYNCPULSE, rpcmouse_dev);
+ input_unregister_device(rpcmouse_dev);
}
module_init(rpcmouse_init);
diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
index d12b93a..4bf5843 100644
--- a/drivers/input/mouse/sermouse.c
+++ b/drivers/input/mouse/sermouse.c
@@ -48,7 +48,7 @@
"Logitech MZ++ Mouse"};
struct sermouse {
- struct input_dev dev;
+ struct input_dev *dev;
signed char buf[8];
unsigned char count;
unsigned char type;
@@ -64,7 +64,7 @@
static void sermouse_process_msc(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
{
- struct input_dev *dev = &sermouse->dev;
+ struct input_dev *dev = sermouse->dev;
signed char *buf = sermouse->buf;
input_regs(dev, regs);
@@ -107,7 +107,7 @@
static void sermouse_process_ms(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
{
- struct input_dev *dev = &sermouse->dev;
+ struct input_dev *dev = sermouse->dev;
signed char *buf = sermouse->buf;
if (data & 0x40) sermouse->count = 0;
@@ -230,9 +230,9 @@
{
struct sermouse *sermouse = serio_get_drvdata(serio);
- input_unregister_device(&sermouse->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(sermouse->dev);
kfree(sermouse);
}
@@ -244,56 +244,52 @@
static int sermouse_connect(struct serio *serio, struct serio_driver *drv)
{
struct sermouse *sermouse;
- unsigned char c;
- int err;
+ struct input_dev *input_dev;
+ unsigned char c = serio->id.extra;
+ int err = -ENOMEM;
- if (!serio->id.proto || serio->id.proto > SERIO_MZPP)
- return -ENODEV;
+ sermouse = kzalloc(sizeof(struct sermouse), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!sermouse || !input_dev)
+ goto fail;
- if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(sermouse, 0, sizeof(struct sermouse));
-
- init_input_dev(&sermouse->dev);
- sermouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
- sermouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- sermouse->dev.private = sermouse;
-
- sermouse->type = serio->id.proto;
- c = serio->id.extra;
-
- if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit);
- if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit);
- if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit);
- if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit);
- if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit);
-
+ sermouse->dev = input_dev;
sprintf(sermouse->phys, "%s/input0", serio->phys);
+ sermouse->type = serio->id.proto;
- sermouse->dev.name = sermouse_protocols[sermouse->type];
- sermouse->dev.phys = sermouse->phys;
- sermouse->dev.id.bustype = BUS_RS232;
- sermouse->dev.id.vendor = sermouse->type;
- sermouse->dev.id.product = c;
- sermouse->dev.id.version = 0x0100;
- sermouse->dev.dev = &serio->dev;
+ input_dev->name = sermouse_protocols[sermouse->type];
+ input_dev->phys = sermouse->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = sermouse->type;
+ input_dev->id.product = c;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_dev->private = sermouse;
+
+ if (c & 0x01) set_bit(BTN_MIDDLE, input_dev->keybit);
+ if (c & 0x02) set_bit(BTN_SIDE, input_dev->keybit);
+ if (c & 0x04) set_bit(BTN_EXTRA, input_dev->keybit);
+ if (c & 0x10) set_bit(REL_WHEEL, input_dev->relbit);
+ if (c & 0x20) set_bit(REL_HWHEEL, input_dev->relbit);
serio_set_drvdata(serio, sermouse);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(sermouse);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&sermouse->dev);
-
- printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys);
+ input_register_device(sermouse->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(sermouse);
+ return err;
}
static struct serio_device_id sermouse_serio_ids[] = {
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 0293094..97cdfd6 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -342,7 +342,7 @@
*/
static void synaptics_process_packet(struct psmouse *psmouse)
{
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
struct synaptics_data *priv = psmouse->private;
struct synaptics_hw_state hw;
int num_fingers;
@@ -473,7 +473,7 @@
static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
struct synaptics_data *priv = psmouse->private;
input_regs(dev, regs);
@@ -645,7 +645,7 @@
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
priv->model_id, priv->capabilities, priv->ext_cap);
- set_input_params(&psmouse->dev, priv);
+ set_input_params(psmouse->dev, priv);
psmouse->protocol_handler = synaptics_process_byte;
psmouse->set_rate = synaptics_set_rate;
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index f024be9..36e9442 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -112,7 +112,7 @@
struct vsxxxaa {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
#define BUFLEN 15 /* At least 5 is needed for a full tablet packet */
unsigned char buf[BUFLEN];
@@ -211,7 +211,7 @@
static void
vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse, struct pt_regs *regs)
{
- struct input_dev *dev = &mouse->dev;
+ struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
int left, middle, right;
int dx, dy;
@@ -269,7 +269,7 @@
static void
vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse, struct pt_regs *regs)
{
- struct input_dev *dev = &mouse->dev;
+ struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
int left, middle, right, touch;
int x, y;
@@ -323,7 +323,7 @@
static void
vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse, struct pt_regs *regs)
{
- struct input_dev *dev = &mouse->dev;
+ struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
int left, middle, right;
unsigned char error;
@@ -483,9 +483,9 @@
{
struct vsxxxaa *mouse = serio_get_drvdata (serio);
- input_unregister_device (&mouse->dev);
serio_close (serio);
serio_set_drvdata (serio, NULL);
+ input_unregister_device (mouse->dev);
kfree (mouse);
}
@@ -493,61 +493,57 @@
vsxxxaa_connect (struct serio *serio, struct serio_driver *drv)
{
struct vsxxxaa *mouse;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- if (!(mouse = kmalloc (sizeof (struct vsxxxaa), GFP_KERNEL)))
- return -ENOMEM;
+ mouse = kzalloc (sizeof (struct vsxxxaa), GFP_KERNEL);
+ input_dev = input_allocate_device ();
+ if (!mouse || !input_dev)
+ goto fail;
- memset (mouse, 0, sizeof (struct vsxxxaa));
-
- init_input_dev (&mouse->dev);
- set_bit (EV_KEY, mouse->dev.evbit); /* We have buttons */
- set_bit (EV_REL, mouse->dev.evbit);
- set_bit (EV_ABS, mouse->dev.evbit);
- set_bit (BTN_LEFT, mouse->dev.keybit); /* We have 3 buttons */
- set_bit (BTN_MIDDLE, mouse->dev.keybit);
- set_bit (BTN_RIGHT, mouse->dev.keybit);
- set_bit (BTN_TOUCH, mouse->dev.keybit); /* ...and Tablet */
- set_bit (REL_X, mouse->dev.relbit);
- set_bit (REL_Y, mouse->dev.relbit);
- set_bit (ABS_X, mouse->dev.absbit);
- set_bit (ABS_Y, mouse->dev.absbit);
-
- mouse->dev.absmin[ABS_X] = 0;
- mouse->dev.absmax[ABS_X] = 1023;
- mouse->dev.absmin[ABS_Y] = 0;
- mouse->dev.absmax[ABS_Y] = 1023;
-
- mouse->dev.private = mouse;
-
+ mouse->dev = input_dev;
+ mouse->serio = serio;
sprintf (mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer");
sprintf (mouse->phys, "%s/input0", serio->phys);
- mouse->dev.name = mouse->name;
- mouse->dev.phys = mouse->phys;
- mouse->dev.id.bustype = BUS_RS232;
- mouse->dev.dev = &serio->dev;
- mouse->serio = serio;
+
+ input_dev->name = mouse->name;
+ input_dev->phys = mouse->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = mouse;
+
+ set_bit (EV_KEY, input_dev->evbit); /* We have buttons */
+ set_bit (EV_REL, input_dev->evbit);
+ set_bit (EV_ABS, input_dev->evbit);
+ set_bit (BTN_LEFT, input_dev->keybit); /* We have 3 buttons */
+ set_bit (BTN_MIDDLE, input_dev->keybit);
+ set_bit (BTN_RIGHT, input_dev->keybit);
+ set_bit (BTN_TOUCH, input_dev->keybit); /* ...and Tablet */
+ set_bit (REL_X, input_dev->relbit);
+ set_bit (REL_Y, input_dev->relbit);
+ input_set_abs_params (input_dev, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params (input_dev, ABS_Y, 0, 1023, 0, 0);
serio_set_drvdata (serio, mouse);
err = serio_open (serio, drv);
- if (err) {
- serio_set_drvdata (serio, NULL);
- kfree (mouse);
- return err;
- }
+ if (err)
+ goto fail;
/*
* Request selftest. Standard packet format and differential
* mode will be requested after the device ID'ed successfully.
*/
- mouse->serio->write (mouse->serio, 'T'); /* Test */
+ serio->write (serio, 'T'); /* Test */
- input_register_device (&mouse->dev);
-
- printk (KERN_INFO "input: %s on %s\n", mouse->name, mouse->phys);
+ input_register_device (input_dev);
return 0;
+
+ fail: serio_set_drvdata (serio, NULL);
+ input_free_device (input_dev);
+ kfree (mouse);
+ return err;
}
static struct serio_device_id vsxxaa_serio_ids[] = {
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index c6194a9..2d0af44 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -9,7 +9,7 @@
* the Free Software Foundation.
*/
-#define MOUSEDEV_MINOR_BASE 32
+#define MOUSEDEV_MINOR_BASE 32
#define MOUSEDEV_MINORS 32
#define MOUSEDEV_MIX 31
@@ -24,7 +24,6 @@
#include <linux/random.h>
#include <linux/major.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
#include <linux/miscdevice.h>
#endif
@@ -621,6 +620,7 @@
static struct input_handle *mousedev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id)
{
struct mousedev *mousedev;
+ struct class_device *cdev;
int minor = 0;
for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++);
@@ -649,11 +649,13 @@
mousedev_table[minor] = mousedev;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/mouse%d", minor);
- class_device_create(input_class,
+ cdev = class_device_create(&input_class, &dev->cdev,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor),
- dev->dev, "mouse%d", minor);
+ dev->cdev.dev, mousedev->name);
+
+ /* temporary symlink to keep userspace happy */
+ sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj,
+ mousedev->name);
return &mousedev->handle;
}
@@ -663,9 +665,9 @@
struct mousedev *mousedev = handle->private;
struct mousedev_list *list;
- class_device_destroy(input_class,
+ sysfs_remove_link(&input_class.subsys.kset.kobj, mousedev->name);
+ class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor));
- devfs_remove("input/mouse%d", mousedev->minor);
mousedev->exist = 0;
if (mousedev->open) {
@@ -738,9 +740,7 @@
mousedev_mix.exist = 1;
mousedev_mix.minor = MOUSEDEV_MIX;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/mice");
- class_device_create(input_class,
+ class_device_create(&input_class, NULL,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice");
#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
@@ -759,8 +759,7 @@
if (psaux_registered)
misc_deregister(&psaux_mouse);
#endif
- devfs_remove("input/mice");
- class_device_destroy(input_class,
+ class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX));
input_unregister_handler(&mousedev_handler);
}
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 897e4c1..a7b0de0 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -211,9 +211,6 @@
writeb(0xff, addr+GSC_RESET);
gscps2_flush(ps2port);
spin_unlock_irqrestore(&ps2port->lock, flags);
-
- /* enable it */
- gscps2_enable(ps2port, ENABLE);
}
static LIST_HEAD(ps2port_list);
@@ -307,6 +304,9 @@
gscps2_reset(ps2port);
+ /* enable it */
+ gscps2_enable(ps2port, ENABLE);
+
gscps2_interrupt(0, NULL, NULL);
return 0;
@@ -331,7 +331,7 @@
{
struct gscps2port *ps2port;
struct serio *serio;
- unsigned long hpa = dev->hpa;
+ unsigned long hpa = dev->hpa.start;
int ret;
if (!dev->irq)
@@ -370,8 +370,6 @@
serio->port_data = ps2port;
serio->dev.parent = &dev->dev;
- list_add_tail(&ps2port->node, &ps2port_list);
-
ret = -EBUSY;
if (request_irq(dev->irq, gscps2_interrupt, SA_SHIRQ, ps2port->port->name, ps2port))
goto fail_miserably;
@@ -396,15 +394,16 @@
serio_register_port(ps2port->port);
+ list_add_tail(&ps2port->node, &ps2port_list);
+
return 0;
fail:
free_irq(dev->irq, ps2port);
fail_miserably:
- list_del(&ps2port->node);
iounmap(ps2port->addr);
- release_mem_region(dev->hpa, GSC_STATUS + 4);
+ release_mem_region(dev->hpa.start, GSC_STATUS + 4);
fail_nomem:
kfree(ps2port);
@@ -444,7 +443,7 @@
};
static struct parisc_driver parisc_ps2_driver = {
- .name = "GSC PS2",
+ .name = "gsc_ps2",
.id_table = gscps2_device_tbl,
.probe = gscps2_probe,
.remove = gscps2_remove,
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index c243cb6f..5704204 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -801,7 +801,8 @@
struct hil_mlc_serio_map *map;
struct hil_mlc *mlc;
- if (serio->private != NULL) return -EBUSY;
+ if (serio_get_drvdata(serio) != NULL)
+ return -EBUSY;
map = serio->port_data;
if (map == NULL) {
@@ -832,11 +833,18 @@
return;
}
- serio->private = NULL;
+ serio_set_drvdata(serio, NULL);
serio->drv = NULL;
/* TODO wake up interruptable */
}
+static struct serio_device_id hil_mlc_serio_id = {
+ .type = SERIO_HIL_MLC,
+ .proto = SERIO_HIL,
+ .extra = SERIO_ANY,
+ .id = SERIO_ANY,
+};
+
int hil_mlc_register(hil_mlc *mlc) {
int i;
unsigned long flags;
@@ -867,7 +875,7 @@
mlc_serio = kmalloc(sizeof(*mlc_serio), GFP_KERNEL);
mlc->serio[i] = mlc_serio;
memset(mlc_serio, 0, sizeof(*mlc_serio));
- mlc_serio->type = SERIO_HIL | SERIO_HIL_MLC;
+ mlc_serio->id = hil_mlc_serio_id;
mlc_serio->write = hil_mlc_serio_write;
mlc_serio->open = hil_mlc_serio_open;
mlc_serio->close = hil_mlc_serio_close;
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 7629452..a10348b 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -764,7 +764,7 @@
static int __init hp_sdc_init_hppa(struct parisc_device *d);
static struct parisc_driver hp_sdc_driver = {
- .name = "HP SDC",
+ .name = "hp_sdc",
.id_table = hp_sdc_tbl,
.probe = hp_sdc_init_hppa,
};
@@ -875,9 +875,9 @@
hp_sdc.dev = d;
hp_sdc.irq = d->irq;
hp_sdc.nmi = d->aux_irq;
- hp_sdc.base_io = d->hpa;
- hp_sdc.data_io = d->hpa + 0x800;
- hp_sdc.status_io = d->hpa + 0x801;
+ hp_sdc.base_io = d->hpa.start;
+ hp_sdc.data_io = d->hpa.start + 0x800;
+ hp_sdc.status_io = d->hpa.start + 0x801;
return hp_sdc_init();
}
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index e3c44ff..1c9426f 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -40,6 +40,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/string.h>
+#include <asm/semaphore.h>
#define PREFIX "HP SDC MLC: "
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 40d451c..4bc40f1 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -911,12 +911,10 @@
* Here we try to restore the original BIOS settings
*/
-static int i8042_suspend(struct device *dev, pm_message_t state, u32 level)
+static int i8042_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_DISABLE) {
- del_timer_sync(&i8042_timer);
- i8042_controller_reset();
- }
+ del_timer_sync(&i8042_timer);
+ i8042_controller_reset();
return 0;
}
@@ -926,13 +924,10 @@
* Here we try to reset everything back to a state in which suspended
*/
-static int i8042_resume(struct device *dev, u32 level)
+static int i8042_resume(struct device *dev)
{
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
if (i8042_ctl_test())
return -1;
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 4c7fbe5..0ba3e65 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -41,8 +41,7 @@
};
struct corgi_ts {
- char phys[32];
- struct input_dev input;
+ struct input_dev *input;
struct timer_list timer;
struct ts_event tc;
int pendown;
@@ -182,14 +181,12 @@
if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0)
return;
- if (regs)
- input_regs(&corgi_ts->input, regs);
-
- input_report_abs(&corgi_ts->input, ABS_X, corgi_ts->tc.x);
- input_report_abs(&corgi_ts->input, ABS_Y, corgi_ts->tc.y);
- input_report_abs(&corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure);
- input_report_key(&corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0));
- input_sync(&corgi_ts->input);
+ input_regs(corgi_ts->input, regs);
+ input_report_abs(corgi_ts->input, ABS_X, corgi_ts->tc.x);
+ input_report_abs(corgi_ts->input, ABS_Y, corgi_ts->tc.y);
+ input_report_abs(corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure);
+ input_report_key(corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0));
+ input_sync(corgi_ts->input);
}
static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer, struct pt_regs *regs)
@@ -234,34 +231,32 @@
}
#ifdef CONFIG_PM
-static int corgits_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int corgits_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct corgi_ts *corgi_ts = dev_get_drvdata(dev);
+ struct corgi_ts *corgi_ts = dev_get_drvdata(dev);
- if (corgi_ts->pendown) {
- del_timer_sync(&corgi_ts->timer);
- corgi_ts->tc.pressure = 0;
- new_data(corgi_ts, NULL);
- corgi_ts->pendown = 0;
- }
- corgi_ts->power_mode = PWR_MODE_SUSPEND;
-
- corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
+ if (corgi_ts->pendown) {
+ del_timer_sync(&corgi_ts->timer);
+ corgi_ts->tc.pressure = 0;
+ new_data(corgi_ts, NULL);
+ corgi_ts->pendown = 0;
}
+ corgi_ts->power_mode = PWR_MODE_SUSPEND;
+
+ corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
+
return 0;
}
-static int corgits_resume(struct device *dev, uint32_t level)
+static int corgits_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct corgi_ts *corgi_ts = dev_get_drvdata(dev);
+ struct corgi_ts *corgi_ts = dev_get_drvdata(dev);
- corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
- /* Enable Falling Edge */
- set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
- corgi_ts->power_mode = PWR_MODE_ACTIVE;
- }
+ corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
+ /* Enable Falling Edge */
+ set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+ corgi_ts->power_mode = PWR_MODE_ACTIVE;
+
return 0;
}
#else
@@ -273,39 +268,44 @@
{
struct corgi_ts *corgi_ts;
struct platform_device *pdev = to_platform_device(dev);
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- if (!(corgi_ts = kmalloc(sizeof(struct corgi_ts), GFP_KERNEL)))
- return -ENOMEM;
+ corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!corgi_ts || !input_dev)
+ goto fail;
dev_set_drvdata(dev, corgi_ts);
- memset(corgi_ts, 0, sizeof(struct corgi_ts));
-
corgi_ts->machinfo = dev->platform_data;
corgi_ts->irq_gpio = platform_get_irq(pdev, 0);
if (corgi_ts->irq_gpio < 0) {
- kfree(corgi_ts);
- return -ENODEV;
+ err = -ENODEV;
+ goto fail;
}
- init_input_dev(&corgi_ts->input);
- corgi_ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- corgi_ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- input_set_abs_params(&corgi_ts->input, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
- input_set_abs_params(&corgi_ts->input, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
- input_set_abs_params(&corgi_ts->input, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0);
+ corgi_ts->input = input_dev;
- strcpy(corgi_ts->phys, "corgits/input0");
+ init_timer(&corgi_ts->timer);
+ corgi_ts->timer.data = (unsigned long) corgi_ts;
+ corgi_ts->timer.function = corgi_ts_timer;
- corgi_ts->input.private = corgi_ts;
- corgi_ts->input.name = "Corgi Touchscreen";
- corgi_ts->input.dev = dev;
- corgi_ts->input.phys = corgi_ts->phys;
- corgi_ts->input.id.bustype = BUS_HOST;
- corgi_ts->input.id.vendor = 0x0001;
- corgi_ts->input.id.product = 0x0002;
- corgi_ts->input.id.version = 0x0100;
+ input_dev->name = "Corgi Touchscreen";
+ input_dev->phys = "corgits/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0002;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = dev;
+ input_dev->private = corgi_ts;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0);
pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN);
@@ -319,25 +319,24 @@
corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
mdelay(5);
- init_timer(&corgi_ts->timer);
- corgi_ts->timer.data = (unsigned long) corgi_ts;
- corgi_ts->timer.function = corgi_ts_timer;
-
- input_register_device(&corgi_ts->input);
- corgi_ts->power_mode = PWR_MODE_ACTIVE;
-
if (request_irq(corgi_ts->irq_gpio, ts_interrupt, SA_INTERRUPT, "ts", corgi_ts)) {
- input_unregister_device(&corgi_ts->input);
- kfree(corgi_ts);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail;
}
+ input_register_device(corgi_ts->input);
+
+ corgi_ts->power_mode = PWR_MODE_ACTIVE;
+
/* Enable Falling Edge */
set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
- printk(KERN_INFO "input: Corgi Touchscreen Registered\n");
-
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(corgi_ts);
+ return err;
+
}
static int corgits_remove(struct device *dev)
@@ -347,7 +346,7 @@
free_irq(corgi_ts->irq_gpio, NULL);
del_timer_sync(&corgi_ts->timer);
corgi_ts->machinfo->put_hsync();
- input_unregister_device(&corgi_ts->input);
+ input_unregister_device(corgi_ts->input);
kfree(corgi_ts);
return 0;
}
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 3cdc9ca..c86a2eb 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -36,14 +36,12 @@
#define ELO_MAX_LENGTH 10
-static char *elo_name = "Elo Serial TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct elo {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
int id;
int idx;
@@ -54,7 +52,7 @@
static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
- struct input_dev *dev = &elo->dev;
+ struct input_dev *dev = elo->dev;
elo->csum += elo->data[elo->idx] = data;
@@ -80,7 +78,7 @@
input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
input_report_abs(dev, ABS_PRESSURE, (elo->data[8] << 8) | elo->data[7]);
- input_report_key(dev, BTN_TOUCH, elo->data[2] & 3);
+ input_report_key(dev, BTN_TOUCH, elo->data[8] || elo->data[7]);
input_sync(dev);
}
elo->idx = 0;
@@ -91,7 +89,7 @@
static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
- struct input_dev *dev = &elo->dev;
+ struct input_dev *dev = elo->dev;
elo->data[elo->idx] = data;
@@ -129,7 +127,7 @@
case 5:
if ((data & 0xf0) == 0) {
input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
- input_report_key(dev, BTN_TOUCH, elo->data[5]);
+ input_report_key(dev, BTN_TOUCH, !!elo->data[5]);
}
input_sync(dev);
elo->idx = 0;
@@ -139,7 +137,7 @@
static void elo_process_data_3(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
- struct input_dev *dev = &elo->dev;
+ struct input_dev *dev = elo->dev;
elo->data[elo->idx] = data;
@@ -191,7 +189,7 @@
{
struct elo* elo = serio_get_drvdata(serio);
- input_unregister_device(&elo->dev);
+ input_unregister_device(elo->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(elo);
@@ -206,67 +204,68 @@
static int elo_connect(struct serio *serio, struct serio_driver *drv)
{
struct elo *elo;
+ struct input_dev *input_dev;
int err;
- if (!(elo = kmalloc(sizeof(struct elo), GFP_KERNEL)))
- return -ENOMEM;
+ elo = kzalloc(sizeof(struct elo), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!elo || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
+ }
- memset(elo, 0, sizeof(struct elo));
-
- init_input_dev(&elo->dev);
- elo->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- elo->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
+ elo->serio = serio;
elo->id = serio->id.id;
+ elo->dev = input_dev;
+ snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys);
+
+ input_dev->private = elo;
+ input_dev->name = "Elo Serial TouchScreen";
+ input_dev->phys = elo->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_ELO;
+ input_dev->id.product = elo->id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
switch (elo->id) {
case 0: /* 10-byte protocol */
- input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0);
- input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0);
- input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
break;
case 1: /* 6-byte protocol */
- input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 15, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0);
case 2: /* 4-byte protocol */
- input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0);
- input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
break;
case 3: /* 3-byte protocol */
- input_set_abs_params(&elo->dev, ABS_X, 0, 255, 0, 0);
- input_set_abs_params(&elo->dev, ABS_Y, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0);
break;
}
- elo->serio = serio;
-
- sprintf(elo->phys, "%s/input0", serio->phys);
-
- elo->dev.private = elo;
- elo->dev.name = elo_name;
- elo->dev.phys = elo->phys;
- elo->dev.id.bustype = BUS_RS232;
- elo->dev.id.vendor = SERIO_ELO;
- elo->dev.id.product = elo->id;
- elo->dev.id.version = 0x0100;
-
serio_set_drvdata(serio, elo);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(elo);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&elo->dev);
-
- printk(KERN_INFO "input: %s on %s\n", elo_name, serio->phys);
-
+ input_register_device(elo->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(elo);
+ return err;
}
/*
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
index 53a27e4..466da19 100644
--- a/drivers/input/touchscreen/gunze.c
+++ b/drivers/input/touchscreen/gunze.c
@@ -48,14 +48,12 @@
#define GUNZE_MAX_LENGTH 10
-static char *gunze_name = "Gunze AHL-51S TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct gunze {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[GUNZE_MAX_LENGTH];
@@ -64,7 +62,7 @@
static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs)
{
- struct input_dev *dev = &gunze->dev;
+ struct input_dev *dev = gunze->dev;
if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
@@ -100,11 +98,13 @@
static void gunze_disconnect(struct serio *serio)
{
- struct gunze* gunze = serio_get_drvdata(serio);
+ struct gunze *gunze = serio_get_drvdata(serio);
- input_unregister_device(&gunze->dev);
+ input_get_device(gunze->dev);
+ input_unregister_device(gunze->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_put_device(gunze->dev);
kfree(gunze);
}
@@ -117,45 +117,45 @@
static int gunze_connect(struct serio *serio, struct serio_driver *drv)
{
struct gunze *gunze;
+ struct input_dev *input_dev;
int err;
- if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(gunze, 0, sizeof(struct gunze));
-
- init_input_dev(&gunze->dev);
- gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- input_set_abs_params(&gunze->dev, ABS_X, 24, 1000, 0, 0);
- input_set_abs_params(&gunze->dev, ABS_Y, 24, 1000, 0, 0);
+ gunze = kzalloc(sizeof(struct gunze), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!gunze || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
+ }
gunze->serio = serio;
-
+ gunze->dev = input_dev;
sprintf(gunze->phys, "%s/input0", serio->phys);
- gunze->dev.private = gunze;
- gunze->dev.name = gunze_name;
- gunze->dev.phys = gunze->phys;
- gunze->dev.id.bustype = BUS_RS232;
- gunze->dev.id.vendor = SERIO_GUNZE;
- gunze->dev.id.product = 0x0051;
- gunze->dev.id.version = 0x0100;
+ input_dev->private = gunze;
+ input_dev->name = "Gunze AHL-51S TouchScreen";
+ input_dev->phys = gunze->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_GUNZE;
+ input_dev->id.product = 0x0051;
+ input_dev->id.version = 0x0100;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0);
serio_set_drvdata(serio, gunze);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(gunze);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&gunze->dev);
-
- printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys);
-
+ input_register_device(gunze->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(gunze);
+ return err;
}
/*
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index bcfa1e3..a18d56b 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -39,7 +39,6 @@
#include <linux/serio.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/pm.h>
/* SA1100 serial defines */
#include <asm/arch/hardware.h>
@@ -93,16 +92,12 @@
#define H3600_SCANCODE_LEFT 8 /* 8 -> left */
#define H3600_SCANCODE_DOWN 9 /* 9 -> down */
-static char *h3600_name = "H3600 TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct h3600_dev {
- struct input_dev dev;
- struct pm_dev *pm_dev;
+ struct input_dev *dev;
struct serio *serio;
- struct pm_dev *pm_dev;
unsigned char event; /* event ID from packet */
unsigned char chksum;
unsigned char len;
@@ -163,33 +158,6 @@
return 0;
}
-static int suspended = 0;
-static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req,
- void *data)
-{
- struct input_dev *dev = (struct input_dev *) data;
-
- switch (req) {
- case PM_SUSPEND: /* enter D1-D3 */
- suspended = 1;
- h3600_flite_power(dev, FLITE_PWR_OFF);
- break;
- case PM_BLANK:
- if (!suspended)
- h3600_flite_power(dev, FLITE_PWR_OFF);
- break;
- case PM_RESUME: /* enter D0 */
- /* same as unblank */
- case PM_UNBLANK:
- if (suspended) {
- //initSerial();
- suspended = 0;
- }
- h3600_flite_power(dev, FLITE_PWR_ON);
- break;
- }
- return 0;
-}
#endif
/*
@@ -199,7 +167,7 @@
*/
static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
{
- struct input_dev *dev = &ts->dev;
+ struct input_dev *dev = ts->dev;
static int touched = 0;
int key, down = 0;
@@ -295,6 +263,7 @@
static int h3600ts_event(struct input_dev *dev, unsigned int type,
unsigned int code, int value)
{
+#if 0
struct h3600_dev *ts = dev->private;
switch (type) {
@@ -304,6 +273,8 @@
}
}
return -1;
+#endif
+ return 0;
}
/*
@@ -380,14 +351,48 @@
static int h3600ts_connect(struct serio *serio, struct serio_driver *drv)
{
struct h3600_dev *ts;
+ struct input_dev *input_dev;
int err;
- if (!(ts = kmalloc(sizeof(struct h3600_dev), GFP_KERNEL)))
- return -ENOMEM;
+ ts = kzalloc(sizeof(struct h3600_dev), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ts || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
- memset(ts, 0, sizeof(struct h3600_dev));
+ ts->serio = serio;
+ ts->dev = input_dev;
+ sprintf(ts->phys, "%s/input0", serio->phys);
- init_input_dev(&ts->dev);
+ input_dev->name = "H3600 TouchScreen";
+ input_dev->phys = ts->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_H3600;
+ input_dev->id.product = 0x0666; /* FIXME !!! We can ask the hardware */
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = ts;
+
+ input_dev->event = h3600ts_event;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR);
+ input_dev->ledbit[0] = BIT(LED_SLEEP);
+ input_set_abs_params(input_dev, ABS_X, 60, 985, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 35, 1024, 0, 0);
+
+ set_bit(KEY_RECORD, input_dev->keybit);
+ set_bit(KEY_Q, input_dev->keybit);
+ set_bit(KEY_PROG1, input_dev->keybit);
+ set_bit(KEY_PROG2, input_dev->keybit);
+ set_bit(KEY_PROG3, input_dev->keybit);
+ set_bit(KEY_UP, input_dev->keybit);
+ set_bit(KEY_RIGHT, input_dev->keybit);
+ set_bit(KEY_LEFT, input_dev->keybit);
+ set_bit(KEY_DOWN, input_dev->keybit);
+ set_bit(KEY_ENTER, input_dev->keybit);
+ set_bit(KEY_SUSPEND, input_dev->keybit);
+ set_bit(BTN_TOUCH, input_dev->keybit);
/* Device specific stuff */
set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES);
@@ -397,73 +402,35 @@
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_action", &ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
- kfree(ts);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail2;
}
if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_suspend", &ts->dev)) {
- free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
- kfree(ts);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail3;
}
- /* Now we have things going we setup our input device */
- ts->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR);
- ts->dev.ledbit[0] = BIT(LED_SLEEP);
- input_set_abs_params(&ts->dev, ABS_X, 60, 985, 0, 0);
- input_set_abs_params(&ts->dev, ABS_Y, 35, 1024, 0, 0);
-
- set_bit(KEY_RECORD, ts->dev.keybit);
- set_bit(KEY_Q, ts->dev.keybit);
- set_bit(KEY_PROG1, ts->dev.keybit);
- set_bit(KEY_PROG2, ts->dev.keybit);
- set_bit(KEY_PROG3, ts->dev.keybit);
- set_bit(KEY_UP, ts->dev.keybit);
- set_bit(KEY_RIGHT, ts->dev.keybit);
- set_bit(KEY_LEFT, ts->dev.keybit);
- set_bit(KEY_DOWN, ts->dev.keybit);
- set_bit(KEY_ENTER, ts->dev.keybit);
- ts->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- ts->dev.keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND);
-
- ts->serio = serio;
-
- sprintf(ts->phys, "%s/input0", serio->phys);
-
- ts->dev.event = h3600ts_event;
- ts->dev.private = ts;
- ts->dev.name = h3600_name;
- ts->dev.phys = ts->phys;
- ts->dev.id.bustype = BUS_RS232;
- ts->dev.id.vendor = SERIO_H3600;
- ts->dev.id.product = 0x0666; /* FIXME !!! We can ask the hardware */
- ts->dev.id.version = 0x0100;
-
serio_set_drvdata(serio, ts);
err = serio_open(serio, drv);
- if (err) {
- free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts);
- free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts);
- serio_set_drvdata(serio, NULL);
- kfree(ts);
+ if (err)
return err;
- }
//h3600_flite_control(1, 25); /* default brightness */
-#ifdef CONFIG_PM
- ts->pm_dev = pm_register(PM_ILLUMINATION_DEV, PM_SYS_LIGHT,
- h3600ts_pm_callback);
- printk("registered pm callback\n");
-#endif
- input_register_device(&ts->dev);
-
- printk(KERN_INFO "input: %s on %s\n", h3600_name, serio->phys);
+ input_register_device(ts->dev);
return 0;
+
+fail3: free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
+fail2: free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev);
+fail1: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(ts);
+ return err;
}
/*
@@ -476,9 +443,11 @@
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev);
- input_unregister_device(&ts->dev);
+ input_get_device(ts->dev);
+ input_unregister_device(ts->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_put_device(ts->dev);
kfree(ts);
}
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index 7e14044..957dd5a 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -21,10 +21,8 @@
static void do_softint(void *data);
-static struct input_dev hp680_ts_dev;
+static struct input_dev *hp680_ts_dev;
static DECLARE_WORK(work, do_softint, 0);
-static char *hp680_ts_name = "HP Jornada touchscreen";
-static char *hp680_ts_phys = "input0";
static void do_softint(void *data)
{
@@ -58,14 +56,14 @@
}
if (touched) {
- input_report_key(&hp680_ts_dev, BTN_TOUCH, 1);
- input_report_abs(&hp680_ts_dev, ABS_X, absx);
- input_report_abs(&hp680_ts_dev, ABS_Y, absy);
+ input_report_key(hp680_ts_dev, BTN_TOUCH, 1);
+ input_report_abs(hp680_ts_dev, ABS_X, absx);
+ input_report_abs(hp680_ts_dev, ABS_Y, absy);
} else {
- input_report_key(&hp680_ts_dev, BTN_TOUCH, 0);
+ input_report_key(hp680_ts_dev, BTN_TOUCH, 0);
}
- input_sync(&hp680_ts_dev);
+ input_sync(hp680_ts_dev);
enable_irq(HP680_TS_IRQ);
}
@@ -92,27 +90,29 @@
scpcr |= SCPCR_TS_ENABLE;
ctrl_outw(scpcr, SCPCR);
- memset(&hp680_ts_dev, 0, sizeof(hp680_ts_dev));
- init_input_dev(&hp680_ts_dev);
+ hp680_ts_dev = input_allocate_device();
+ if (!hp680_ts_dev)
+ return -ENOMEM;
- hp680_ts_dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
- hp680_ts_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- hp680_ts_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ hp680_ts_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
+ hp680_ts_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+ hp680_ts_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- hp680_ts_dev.absmin[ABS_X] = HP680_TS_ABS_X_MIN;
- hp680_ts_dev.absmin[ABS_Y] = HP680_TS_ABS_Y_MIN;
- hp680_ts_dev.absmax[ABS_X] = HP680_TS_ABS_X_MAX;
- hp680_ts_dev.absmax[ABS_Y] = HP680_TS_ABS_Y_MAX;
+ hp680_ts_dev->absmin[ABS_X] = HP680_TS_ABS_X_MIN;
+ hp680_ts_dev->absmin[ABS_Y] = HP680_TS_ABS_Y_MIN;
+ hp680_ts_dev->absmax[ABS_X] = HP680_TS_ABS_X_MAX;
+ hp680_ts_dev->absmax[ABS_Y] = HP680_TS_ABS_Y_MAX;
- hp680_ts_dev.name = hp680_ts_name;
- hp680_ts_dev.phys = hp680_ts_phys;
- input_register_device(&hp680_ts_dev);
+ hp680_ts_dev->name = "HP Jornada touchscreen";
+ hp680_ts_dev->phys = "hp680_ts/input0";
- if (request_irq
- (HP680_TS_IRQ, hp680_ts_interrupt, SA_INTERRUPT, MODNAME, 0) < 0) {
- printk(KERN_ERR "hp680_touchscreen.c : Can't allocate irq %d\n",
+ input_register_device(hp680_ts_dev);
+
+ if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt,
+ SA_INTERRUPT, MODNAME, 0) < 0) {
+ printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
HP680_TS_IRQ);
- input_unregister_device(&hp680_ts_dev);
+ input_unregister_device(hp680_ts_dev);
return -EBUSY;
}
@@ -124,7 +124,7 @@
free_irq(HP680_TS_IRQ, 0);
cancel_delayed_work(&work);
flush_scheduled_work();
- input_unregister_device(&hp680_ts_dev);
+ input_unregister_device(hp680_ts_dev);
}
module_init(hp680_ts_init);
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
index afaaebe..4844d25 100644
--- a/drivers/input/touchscreen/mk712.c
+++ b/drivers/input/touchscreen/mk712.c
@@ -77,7 +77,7 @@
#define MK712_READ_ONE_POINT 0x20
#define MK712_POWERUP 0x40
-static struct input_dev mk712_dev;
+static struct input_dev *mk712_dev;
static DEFINE_SPINLOCK(mk712_lock);
static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -88,7 +88,7 @@
static unsigned short last_y;
spin_lock(&mk712_lock);
- input_regs(&mk712_dev, regs);
+ input_regs(mk712_dev, regs);
status = inb(mk712_io + MK712_STATUS);
@@ -100,7 +100,7 @@
if (~status & MK712_STATUS_TOUCH)
{
debounce = 1;
- input_report_key(&mk712_dev, BTN_TOUCH, 0);
+ input_report_key(mk712_dev, BTN_TOUCH, 0);
goto end;
}
@@ -110,15 +110,15 @@
goto end;
}
- input_report_key(&mk712_dev, BTN_TOUCH, 1);
- input_report_abs(&mk712_dev, ABS_X, last_x);
- input_report_abs(&mk712_dev, ABS_Y, last_y);
+ input_report_key(mk712_dev, BTN_TOUCH, 1);
+ input_report_abs(mk712_dev, ABS_X, last_x);
+ input_report_abs(mk712_dev, ABS_Y, last_y);
end:
last_x = inw(mk712_io + MK712_X) & 0x0fff;
last_y = inw(mk712_io + MK712_Y) & 0x0fff;
- input_sync(&mk712_dev);
+ input_sync(mk712_dev);
spin_unlock(&mk712_lock);
return IRQ_HANDLED;
}
@@ -154,30 +154,11 @@
spin_unlock_irqrestore(&mk712_lock, flags);
}
-static struct input_dev mk712_dev = {
- .evbit = { BIT(EV_KEY) | BIT(EV_ABS) },
- .keybit = { [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) },
- .absbit = { BIT(ABS_X) | BIT(ABS_Y) },
- .open = mk712_open,
- .close = mk712_close,
- .name = "ICS MicroClock MK712 TouchScreen",
- .phys = "isa0260/input0",
- .absmin = { [ABS_X] = 0, [ABS_Y] = 0 },
- .absmax = { [ABS_X] = 0xfff, [ABS_Y] = 0xfff },
- .absfuzz = { [ABS_X] = 88, [ABS_Y] = 88 },
- .id = {
- .bustype = BUS_ISA,
- .vendor = 0x0005,
- .product = 0x0001,
- .version = 0x0100,
- },
-};
-
int __init mk712_init(void)
{
+ int err;
- if(!request_region(mk712_io, 8, "mk712"))
- {
+ if (!request_region(mk712_io, 8, "mk712")) {
printk(KERN_WARNING "mk712: unable to get IO region\n");
return -ENODEV;
}
@@ -188,28 +169,49 @@
(inw(mk712_io + MK712_Y) & 0xf000) ||
(inw(mk712_io + MK712_STATUS) & 0xf333)) {
printk(KERN_WARNING "mk712: device not present\n");
- release_region(mk712_io, 8);
- return -ENODEV;
+ err = -ENODEV;
+ goto fail;
}
- if(request_irq(mk712_irq, mk712_interrupt, 0, "mk712", &mk712_dev))
- {
+ if (!(mk712_dev = input_allocate_device())) {
+ printk(KERN_ERR "mk712: not enough memory\n");
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ mk712_dev->name = "ICS MicroClock MK712 TouchScreen";
+ mk712_dev->phys = "isa0260/input0";
+ mk712_dev->id.bustype = BUS_ISA;
+ mk712_dev->id.vendor = 0x0005;
+ mk712_dev->id.product = 0x0001;
+ mk712_dev->id.version = 0x0100;
+
+ mk712_dev->open = mk712_open;
+ mk712_dev->close = mk712_close;
+
+ mk712_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ mk712_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(mk712_dev, ABS_X, 0, 0xfff, 88, 0);
+ input_set_abs_params(mk712_dev, ABS_Y, 0, 0xfff, 88, 0);
+
+ if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) {
printk(KERN_WARNING "mk712: unable to get IRQ\n");
- release_region(mk712_io, 8);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail;
}
- input_register_device(&mk712_dev);
-
- printk(KERN_INFO "input: ICS MicroClock MK712 TouchScreen at %#x irq %d\n", mk712_io, mk712_irq);
-
+ input_register_device(mk712_dev);
return 0;
+
+ fail: input_free_device(mk712_dev);
+ release_region(mk712_io, 8);
+ return err;
}
static void __exit mk712_exit(void)
{
- input_unregister_device(&mk712_dev);
- free_irq(mk712_irq, &mk712_dev);
+ input_unregister_device(mk712_dev);
+ free_irq(mk712_irq, mk712_dev);
release_region(mk712_io, 8);
}
diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c
index aa8ee78..1d0d37e 100644
--- a/drivers/input/touchscreen/mtouch.c
+++ b/drivers/input/touchscreen/mtouch.c
@@ -51,14 +51,12 @@
#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])
#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])
-static char *mtouch_name = "MicroTouch Serial TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct mtouch {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[MTOUCH_MAX_LENGTH];
@@ -67,7 +65,7 @@
static void mtouch_process_format_tablet(struct mtouch *mtouch, struct pt_regs *regs)
{
- struct input_dev *dev = &mtouch->dev;
+ struct input_dev *dev = mtouch->dev;
if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
input_regs(dev, regs);
@@ -116,9 +114,11 @@
{
struct mtouch* mtouch = serio_get_drvdata(serio);
- input_unregister_device(&mtouch->dev);
+ input_get_device(mtouch->dev);
+ input_unregister_device(mtouch->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_put_device(mtouch->dev);
kfree(mtouch);
}
@@ -131,46 +131,46 @@
static int mtouch_connect(struct serio *serio, struct serio_driver *drv)
{
struct mtouch *mtouch;
+ struct input_dev *input_dev;
int err;
- if (!(mtouch = kmalloc(sizeof(*mtouch), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(mtouch, 0, sizeof(*mtouch));
-
- init_input_dev(&mtouch->dev);
- mtouch->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- mtouch->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- input_set_abs_params(&mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
- input_set_abs_params(&mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
+ mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!mtouch || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
+ }
mtouch->serio = serio;
-
+ mtouch->dev = input_dev;
sprintf(mtouch->phys, "%s/input0", serio->phys);
- mtouch->dev.private = mtouch;
- mtouch->dev.name = mtouch_name;
- mtouch->dev.phys = mtouch->phys;
- mtouch->dev.id.bustype = BUS_RS232;
- mtouch->dev.id.vendor = SERIO_MICROTOUCH;
- mtouch->dev.id.product = 0;
- mtouch->dev.id.version = 0x0100;
+ input_dev->private = mtouch;
+ input_dev->name = "MicroTouch Serial TouchScreen";
+ input_dev->phys = mtouch->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_MICROTOUCH;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0100;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
+ input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
serio_set_drvdata(serio, mtouch);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(mtouch);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&mtouch->dev);
-
- printk(KERN_INFO "input: %s on %s\n", mtouch->dev.name, serio->phys);
+ input_register_device(mtouch->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(mtouch);
+ return err;
}
/*
diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c
index 50c63a1..ca15479 100644
--- a/drivers/input/tsdev.c
+++ b/drivers/input/tsdev.c
@@ -53,7 +53,6 @@
#include <linux/random.h>
#include <linux/time.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
#ifndef CONFIG_INPUT_TSDEV_SCREEN_X
#define CONFIG_INPUT_TSDEV_SCREEN_X 240
@@ -369,6 +368,7 @@
struct input_device_id *id)
{
struct tsdev *tsdev;
+ struct class_device *cdev;
int minor, delta;
for (minor = 0; minor < TSDEV_MINORS/2 && tsdev_table[minor];
@@ -410,13 +410,13 @@
tsdev_table[minor] = tsdev;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/ts%d", minor);
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor + TSDEV_MINORS/2),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/tsraw%d", minor);
- class_device_create(input_class,
+ cdev = class_device_create(&input_class, &dev->cdev,
MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor),
- dev->dev, "ts%d", minor);
+ dev->cdev.dev, tsdev->name);
+
+ /* temporary symlink to keep userspace happy */
+ sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj,
+ tsdev->name);
return &tsdev->handle;
}
@@ -426,10 +426,9 @@
struct tsdev *tsdev = handle->private;
struct tsdev_list *list;
- class_device_destroy(input_class,
+ sysfs_remove_link(&input_class.subsys.kset.kobj, tsdev->name);
+ class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor));
- devfs_remove("input/ts%d", tsdev->minor);
- devfs_remove("input/tsraw%d", tsdev->minor);
tsdev->exist = 0;
if (tsdev->open) {
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 04fb606..11ae0fd 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1505,7 +1505,7 @@
return PTR_ERR(capi_class);
}
- class_device_create(capi_class, MKDEV(capi_major, 0), NULL, "capi");
+ class_device_create(capi_class, NULL, MKDEV(capi_major, 0), NULL, "capi");
devfs_mk_cdev(MKDEV(capi_major, 0), S_IFCHR | S_IRUSR | S_IWUSR,
"isdn/capi20");
diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
index 3abd7fc..7b564c0 100644
--- a/drivers/isdn/capi/capifs.c
+++ b/drivers/isdn/capi/capifs.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ctype.h>
+#include <linux/sched.h> /* current */
MODULE_DESCRIPTION("CAPI4Linux: /dev/capi/ filesystem");
MODULE_AUTHOR("Carsten Paeth");
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index 7333377a..e3866b0 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -1063,7 +1063,7 @@
Write_hfc8(l1->hw, A_INC_RES_FIFO, 1);
}
ack_len += skb->truesize;
- bch->tx_skb = 0;
+ bch->tx_skb = NULL;
bch->tx_cnt = 0;
dev_kfree_skb(skb);
} else
@@ -1659,10 +1659,10 @@
}
static struct pci_driver hfc4s8s_driver = {
- name:"hfc4s8s_l1",
- probe:hfc4s8s_probe,
- remove:__devexit_p(hfc4s8s_remove),
- id_table:hfc4s8s_ids,
+ .name = "hfc4s8s_l1",
+ .probe = hfc4s8s_probe,
+ .remove = __devexit_p(hfc4s8s_remove),
+ .id_table = hfc4s8s_ids,
};
/**********************/
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index c0dc1e3..d2ead17 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -905,5 +905,5 @@
adb_dev_class = class_create(THIS_MODULE, "adb");
if (IS_ERR(adb_dev_class))
return;
- class_device_create(adb_dev_class, MKDEV(ADB_MAJOR, 0), NULL, "adb");
+ class_device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL, "adb");
}
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index db654e8..cdb6d02 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -206,7 +206,7 @@
};
struct adbhid {
- struct input_dev input;
+ struct input_dev *input;
int id;
int default_id;
int original_handler_id;
@@ -291,10 +291,10 @@
switch (keycode) {
case ADB_KEY_CAPSLOCK: /* Generate down/up events for CapsLock everytime. */
- input_regs(&ahid->input, regs);
- input_report_key(&ahid->input, KEY_CAPSLOCK, 1);
- input_report_key(&ahid->input, KEY_CAPSLOCK, 0);
- input_sync(&ahid->input);
+ input_regs(ahid->input, regs);
+ input_report_key(ahid->input, KEY_CAPSLOCK, 1);
+ input_report_key(ahid->input, KEY_CAPSLOCK, 0);
+ input_sync(ahid->input);
return;
#ifdef CONFIG_PPC_PMAC
case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */
@@ -347,10 +347,10 @@
}
if (adbhid[id]->keycode[keycode]) {
- input_regs(&adbhid[id]->input, regs);
- input_report_key(&adbhid[id]->input,
+ input_regs(adbhid[id]->input, regs);
+ input_report_key(adbhid[id]->input,
adbhid[id]->keycode[keycode], !up_flag);
- input_sync(&adbhid[id]->input);
+ input_sync(adbhid[id]->input);
} else
printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode,
up_flag ? "released" : "pressed");
@@ -441,20 +441,20 @@
break;
}
- input_regs(&adbhid[id]->input, regs);
+ input_regs(adbhid[id]->input, regs);
- input_report_key(&adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1));
- input_report_key(&adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1));
+ input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1));
+ input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1));
if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD)
- input_report_key(&adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1));
+ input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1));
- input_report_rel(&adbhid[id]->input, REL_X,
+ input_report_rel(adbhid[id]->input, REL_X,
((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 ));
- input_report_rel(&adbhid[id]->input, REL_Y,
+ input_report_rel(adbhid[id]->input, REL_Y,
((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 ));
- input_sync(&adbhid[id]->input);
+ input_sync(adbhid[id]->input);
}
static void
@@ -467,7 +467,7 @@
return;
}
- input_regs(&adbhid[id]->input, regs);
+ input_regs(adbhid[id]->input, regs);
switch (adbhid[id]->original_handler_id) {
default:
@@ -477,19 +477,19 @@
switch (data[1] & 0x0f) {
case 0x0: /* microphone */
- input_report_key(&adbhid[id]->input, KEY_SOUND, down);
+ input_report_key(adbhid[id]->input, KEY_SOUND, down);
break;
case 0x1: /* mute */
- input_report_key(&adbhid[id]->input, KEY_MUTE, down);
+ input_report_key(adbhid[id]->input, KEY_MUTE, down);
break;
case 0x2: /* volume decrease */
- input_report_key(&adbhid[id]->input, KEY_VOLUMEDOWN, down);
+ input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
break;
case 0x3: /* volume increase */
- input_report_key(&adbhid[id]->input, KEY_VOLUMEUP, down);
+ input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
break;
default:
@@ -513,19 +513,19 @@
switch (data[1] & 0x0f) {
case 0x8: /* mute */
- input_report_key(&adbhid[id]->input, KEY_MUTE, down);
+ input_report_key(adbhid[id]->input, KEY_MUTE, down);
break;
case 0x7: /* volume decrease */
- input_report_key(&adbhid[id]->input, KEY_VOLUMEDOWN, down);
+ input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
break;
case 0x6: /* volume increase */
- input_report_key(&adbhid[id]->input, KEY_VOLUMEUP, down);
+ input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
break;
case 0xb: /* eject */
- input_report_key(&adbhid[id]->input, KEY_EJECTCD, down);
+ input_report_key(adbhid[id]->input, KEY_EJECTCD, down);
break;
case 0xa: /* brightness decrease */
@@ -539,7 +539,7 @@
}
}
#endif /* CONFIG_PMAC_BACKLIGHT */
- input_report_key(&adbhid[id]->input, KEY_BRIGHTNESSDOWN, down);
+ input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down);
break;
case 0x9: /* brightness increase */
@@ -553,19 +553,19 @@
}
}
#endif /* CONFIG_PMAC_BACKLIGHT */
- input_report_key(&adbhid[id]->input, KEY_BRIGHTNESSUP, down);
+ input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down);
break;
case 0xc: /* videomode switch */
- input_report_key(&adbhid[id]->input, KEY_SWITCHVIDEOMODE, down);
+ input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down);
break;
case 0xd: /* keyboard illumination toggle */
- input_report_key(&adbhid[id]->input, KEY_KBDILLUMTOGGLE, down);
+ input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down);
break;
case 0xe: /* keyboard illumination decrease */
- input_report_key(&adbhid[id]->input, KEY_KBDILLUMDOWN, down);
+ input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down);
break;
case 0xf:
@@ -573,7 +573,7 @@
case 0x8f:
case 0x0f:
/* keyboard illumination increase */
- input_report_key(&adbhid[id]->input, KEY_KBDILLUMUP, down);
+ input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down);
break;
case 0x7f:
@@ -596,7 +596,7 @@
break;
}
- input_sync(&adbhid[id]->input);
+ input_sync(adbhid[id]->input);
}
static struct adb_request led_request;
@@ -683,7 +683,7 @@
int i;
for (i = 1; i < 16; i++) {
if (adbhid[i])
- del_timer_sync(&adbhid[i]->input.timer);
+ del_timer_sync(&adbhid[i]->input->timer);
}
}
@@ -699,153 +699,163 @@
return NOTIFY_DONE;
}
-static void
+static int
adbhid_input_register(int id, int default_id, int original_handler_id,
int current_handler_id, int mouse_kind)
{
+ struct adbhid *hid;
+ struct input_dev *input_dev;
+ int err;
int i;
if (adbhid[id]) {
printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id);
- return;
+ return -EEXIST;
}
- if (!(adbhid[id] = kmalloc(sizeof(struct adbhid), GFP_KERNEL)))
- return;
+ adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!hid || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
- memset(adbhid[id], 0, sizeof(struct adbhid));
- sprintf(adbhid[id]->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
+ }
- init_input_dev(&adbhid[id]->input);
+ sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
- adbhid[id]->id = default_id;
- adbhid[id]->original_handler_id = original_handler_id;
- adbhid[id]->current_handler_id = current_handler_id;
- adbhid[id]->mouse_kind = mouse_kind;
- adbhid[id]->flags = 0;
- adbhid[id]->input.private = adbhid[id];
- adbhid[id]->input.name = adbhid[id]->name;
- adbhid[id]->input.phys = adbhid[id]->phys;
- adbhid[id]->input.id.bustype = BUS_ADB;
- adbhid[id]->input.id.vendor = 0x0001;
- adbhid[id]->input.id.product = (id << 12) | (default_id << 8) | original_handler_id;
- adbhid[id]->input.id.version = 0x0100;
+ hid->id = default_id;
+ hid->original_handler_id = original_handler_id;
+ hid->current_handler_id = current_handler_id;
+ hid->mouse_kind = mouse_kind;
+ hid->flags = 0;
+ input_dev->private = hid;
+ input_dev->name = hid->name;
+ input_dev->phys = hid->phys;
+ input_dev->id.bustype = BUS_ADB;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id;
+ input_dev->id.version = 0x0100;
switch (default_id) {
case ADB_KEYBOARD:
- if (!(adbhid[id]->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL))) {
- kfree(adbhid[id]);
- return;
+ hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL);
+ if (!hid->keycode) {
+ err = -ENOMEM;
+ goto fail;
}
- sprintf(adbhid[id]->name, "ADB keyboard");
+ sprintf(hid->name, "ADB keyboard");
- memcpy(adbhid[id]->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
+ memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
printk(KERN_INFO "Detected ADB keyboard, type ");
switch (original_handler_id) {
default:
printk("<unknown>.\n");
- adbhid[id]->input.id.version = ADB_KEYBOARD_UNKNOWN;
+ input_dev->id.version = ADB_KEYBOARD_UNKNOWN;
break;
case 0x01: case 0x02: case 0x03: case 0x06: case 0x08:
case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C:
case 0xC0: case 0xC3: case 0xC6:
printk("ANSI.\n");
- adbhid[id]->input.id.version = ADB_KEYBOARD_ANSI;
+ input_dev->id.version = ADB_KEYBOARD_ANSI;
break;
case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D:
case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1:
case 0xC4: case 0xC7:
printk("ISO, swapping keys.\n");
- adbhid[id]->input.id.version = ADB_KEYBOARD_ISO;
- i = adbhid[id]->keycode[10];
- adbhid[id]->keycode[10] = adbhid[id]->keycode[50];
- adbhid[id]->keycode[50] = i;
+ input_dev->id.version = ADB_KEYBOARD_ISO;
+ i = hid->keycode[10];
+ hid->keycode[10] = hid->keycode[50];
+ hid->keycode[50] = i;
break;
case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A:
case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9:
printk("JIS.\n");
- adbhid[id]->input.id.version = ADB_KEYBOARD_JIS;
+ input_dev->id.version = ADB_KEYBOARD_JIS;
break;
}
for (i = 0; i < 128; i++)
- if (adbhid[id]->keycode[i])
- set_bit(adbhid[id]->keycode[i], adbhid[id]->input.keybit);
+ if (hid->keycode[i])
+ set_bit(hid->keycode[i], input_dev->keybit);
- adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
- adbhid[id]->input.ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML);
- adbhid[id]->input.event = adbhid_kbd_event;
- adbhid[id]->input.keycodemax = 127;
- adbhid[id]->input.keycodesize = 1;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+ input_dev->ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML);
+ input_dev->event = adbhid_kbd_event;
+ input_dev->keycodemax = 127;
+ input_dev->keycodesize = 1;
break;
case ADB_MOUSE:
- sprintf(adbhid[id]->name, "ADB mouse");
+ sprintf(hid->name, "ADB mouse");
- adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- adbhid[id]->input.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- adbhid[id]->input.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
break;
case ADB_MISC:
switch (original_handler_id) {
case 0x02: /* Adjustable keyboard button device */
- sprintf(adbhid[id]->name, "ADB adjustable keyboard buttons");
- adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- set_bit(KEY_SOUND, adbhid[id]->input.keybit);
- set_bit(KEY_MUTE, adbhid[id]->input.keybit);
- set_bit(KEY_VOLUMEUP, adbhid[id]->input.keybit);
- set_bit(KEY_VOLUMEDOWN, adbhid[id]->input.keybit);
+ sprintf(hid->name, "ADB adjustable keyboard buttons");
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ set_bit(KEY_SOUND, input_dev->keybit);
+ set_bit(KEY_MUTE, input_dev->keybit);
+ set_bit(KEY_VOLUMEUP, input_dev->keybit);
+ set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
break;
case 0x1f: /* Powerbook button device */
- sprintf(adbhid[id]->name, "ADB Powerbook buttons");
- adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- set_bit(KEY_MUTE, adbhid[id]->input.keybit);
- set_bit(KEY_VOLUMEUP, adbhid[id]->input.keybit);
- set_bit(KEY_VOLUMEDOWN, adbhid[id]->input.keybit);
- set_bit(KEY_BRIGHTNESSUP, adbhid[id]->input.keybit);
- set_bit(KEY_BRIGHTNESSDOWN, adbhid[id]->input.keybit);
- set_bit(KEY_EJECTCD, adbhid[id]->input.keybit);
- set_bit(KEY_SWITCHVIDEOMODE, adbhid[id]->input.keybit);
- set_bit(KEY_KBDILLUMTOGGLE, adbhid[id]->input.keybit);
- set_bit(KEY_KBDILLUMDOWN, adbhid[id]->input.keybit);
- set_bit(KEY_KBDILLUMUP, adbhid[id]->input.keybit);
+ sprintf(hid->name, "ADB Powerbook buttons");
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ set_bit(KEY_MUTE, input_dev->keybit);
+ set_bit(KEY_VOLUMEUP, input_dev->keybit);
+ set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
+ set_bit(KEY_BRIGHTNESSUP, input_dev->keybit);
+ set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit);
+ set_bit(KEY_EJECTCD, input_dev->keybit);
+ set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit);
+ set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit);
+ set_bit(KEY_KBDILLUMDOWN, input_dev->keybit);
+ set_bit(KEY_KBDILLUMUP, input_dev->keybit);
break;
}
- if (adbhid[id]->name[0])
+ if (hid->name[0])
break;
/* else fall through */
default:
printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n");
- kfree(adbhid[id]);
- return;
+ err = -ENODEV;
+ goto fail;
}
- adbhid[id]->input.keycode = adbhid[id]->keycode;
+ input_dev->keycode = hid->keycode;
- input_register_device(&adbhid[id]->input);
-
- printk(KERN_INFO "input: %s on %s\n",
- adbhid[id]->name, adbhid[id]->phys);
+ input_register_device(input_dev);
if (default_id == ADB_KEYBOARD) {
/* HACK WARNING!! This should go away as soon there is an utility
* to control that for event devices.
*/
- adbhid[id]->input.rep[REP_DELAY] = 500; /* input layer default: 250 */
- adbhid[id]->input.rep[REP_PERIOD] = 66; /* input layer default: 33 */
+ input_dev->rep[REP_DELAY] = 500; /* input layer default: 250 */
+ input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */
}
+
+ return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(hid);
+ adbhid[id] = NULL;
+ return err;
}
static void adbhid_input_unregister(int id)
{
- input_unregister_device(&adbhid[id]->input);
+ input_unregister_device(adbhid[id]->input);
if (adbhid[id]->keycode)
kfree(adbhid[id]->keycode);
kfree(adbhid[id]);
@@ -858,7 +868,7 @@
int cur_handler_id, int mk)
{
if (adbhid[id]) {
- if (adbhid[id]->input.id.product !=
+ if (adbhid[id]->input->id.product !=
((id << 12)|(default_id << 8)|org_handler_id)) {
adbhid_input_unregister(id);
adbhid_input_register(id, default_id, org_handler_id,
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 5ad3a5a..a666361 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -16,8 +16,8 @@
#include <linux/module.h>
-static struct input_dev emumousebtn;
-static void emumousebtn_input_register(void);
+static struct input_dev *emumousebtn;
+static int emumousebtn_input_register(void);
static int mouse_emulate_buttons = 0;
static int mouse_button2_keycode = KEY_RIGHTCTRL; /* right control key */
static int mouse_button3_keycode = KEY_RIGHTALT; /* right option key */
@@ -90,10 +90,10 @@
&& (keycode == mouse_button2_keycode
|| keycode == mouse_button3_keycode)) {
if (mouse_emulate_buttons == 1) {
- input_report_key(&emumousebtn,
+ input_report_key(emumousebtn,
keycode == mouse_button2_keycode ? BTN_MIDDLE : BTN_RIGHT,
down);
- input_sync(&emumousebtn);
+ input_sync(emumousebtn);
return 1;
}
mouse_last_keycode = down ? keycode : 0;
@@ -105,30 +105,34 @@
EXPORT_SYMBOL(mac_hid_mouse_emulate_buttons);
-static void emumousebtn_input_register(void)
+static int emumousebtn_input_register(void)
{
- emumousebtn.name = "Macintosh mouse button emulation";
+ emumousebtn = input_allocate_device();
+ if (!emumousebtn)
+ return -ENOMEM;
- init_input_dev(&emumousebtn);
+ emumousebtn->name = "Macintosh mouse button emulation";
+ emumousebtn->id.bustype = BUS_ADB;
+ emumousebtn->id.vendor = 0x0001;
+ emumousebtn->id.product = 0x0001;
+ emumousebtn->id.version = 0x0100;
- emumousebtn.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- emumousebtn.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- emumousebtn.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ emumousebtn->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ emumousebtn->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ emumousebtn->relbit[0] = BIT(REL_X) | BIT(REL_Y);
- emumousebtn.id.bustype = BUS_ADB;
- emumousebtn.id.vendor = 0x0001;
- emumousebtn.id.product = 0x0001;
- emumousebtn.id.version = 0x0100;
+ input_register_device(emumousebtn);
- input_register_device(&emumousebtn);
-
- printk(KERN_INFO "input: Macintosh mouse button emulation\n");
+ return 0;
}
int __init mac_hid_init(void)
{
+ int err;
- emumousebtn_input_register();
+ err = emumousebtn_input_register();
+ if (err)
+ return err;
#if defined(CONFIG_SYSCTL)
mac_hid_sysctl_header = register_sysctl_table(mac_hid_root_dir, 1);
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 1ee0033..c34c96d 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -17,6 +17,8 @@
#include <linux/pci_ids.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
+
#include <asm/machdep.h>
#include <asm/macio.h>
#include <asm/pmac_feature.h>
diff --git a/drivers/mca/mca-device.c b/drivers/mca/mca-device.c
index 76d430a..e7adf89 100644
--- a/drivers/mca/mca-device.c
+++ b/drivers/mca/mca-device.c
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/mca.h>
+#include <linux/string.h>
/**
* mca_device_read_stored_pos - read POS register from stored data
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 2fba2bb..01654fc 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -91,7 +91,7 @@
#define WRITE_POOL_SIZE 256
/* mempool for queueing pending writes on the bitmap file */
-static void *write_pool_alloc(unsigned int gfp_flags, void *data)
+static void *write_pool_alloc(gfp_t gfp_flags, void *data)
{
return kmalloc(sizeof(struct page_list), gfp_flags);
}
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index b6148f6..cf66310 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -15,7 +15,7 @@
#include <linux/crypto.h>
#include <linux/workqueue.h>
#include <asm/atomic.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <asm/page.h>
#include "dm.h"
@@ -164,9 +164,7 @@
return -ENOMEM;
}
- sg.page = virt_to_page(cc->key);
- sg.offset = offset_in_page(cc->key);
- sg.length = cc->key_size;
+ sg_set_buf(&sg, cc->key, cc->key_size);
crypto_digest_digest(hash_tfm, &sg, 1, salt);
crypto_free_tfm(hash_tfm);
@@ -207,14 +205,12 @@
static int crypt_iv_essiv_gen(struct crypt_config *cc, u8 *iv, sector_t sector)
{
- struct scatterlist sg = { NULL, };
+ struct scatterlist sg;
memset(iv, 0, cc->iv_size);
*(u64 *)iv = cpu_to_le64(sector);
- sg.page = virt_to_page(iv);
- sg.offset = offset_in_page(iv);
- sg.length = cc->iv_size;
+ sg_set_buf(&sg, iv, cc->iv_size);
crypto_cipher_encrypt((struct crypto_tfm *)cc->iv_gen_private,
&sg, &sg, cc->iv_size);
@@ -331,7 +327,7 @@
{
struct bio *bio;
unsigned int nr_iovecs = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
- int gfp_mask = GFP_NOIO | __GFP_HIGHMEM;
+ gfp_t gfp_mask = GFP_NOIO | __GFP_HIGHMEM;
unsigned int i;
/*
diff --git a/drivers/media/common/ir-common.c b/drivers/media/common/ir-common.c
index a0e700d..31fccb4 100644
--- a/drivers/media/common/ir-common.c
+++ b/drivers/media/common/ir-common.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/string.h>
#include <media/ir-common.h>
/* -------------------------------------------------------------------------- */
@@ -252,7 +253,6 @@
if (ir_codes)
memcpy(ir->ir_codes, ir_codes, sizeof(ir->ir_codes));
- init_input_dev(dev);
dev->keycode = ir->ir_codes;
dev->keycodesize = sizeof(IR_KEYTAB_TYPE);
dev->keycodemax = IR_KEYTAB_SIZE;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 6db0929..a1607e7 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -137,7 +137,8 @@
struct urb *stream_urb [STREAM_URB_COUNT];
#ifdef ENABLE_RC
- struct input_dev rc_input_dev;
+ struct input_dev *rc_input_dev;
+ char phys[64];
struct work_struct rc_query_work;
int rc_input_event;
u32 rc_last_code;
@@ -683,6 +684,7 @@
};
#ifdef ENABLE_RC
+
static void cinergyt2_query_rc (void *data)
{
struct cinergyt2 *cinergyt2 = data;
@@ -703,7 +705,7 @@
/* stop key repeat */
if (cinergyt2->rc_input_event != KEY_MAX) {
dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event);
- input_report_key(&cinergyt2->rc_input_dev,
+ input_report_key(cinergyt2->rc_input_dev,
cinergyt2->rc_input_event, 0);
cinergyt2->rc_input_event = KEY_MAX;
}
@@ -722,7 +724,7 @@
/* keyrepeat bit -> just repeat last rc_input_event */
} else {
cinergyt2->rc_input_event = KEY_MAX;
- for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3) {
+ for (i = 0; i < ARRAY_SIZE(rc_keys); i += 3) {
if (rc_keys[i + 0] == rc_events[n].type &&
rc_keys[i + 1] == le32_to_cpu(rc_events[n].value)) {
cinergyt2->rc_input_event = rc_keys[i + 2];
@@ -736,11 +738,11 @@
cinergyt2->rc_last_code != ~0) {
/* emit a key-up so the double event is recognized */
dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event);
- input_report_key(&cinergyt2->rc_input_dev,
+ input_report_key(cinergyt2->rc_input_dev,
cinergyt2->rc_input_event, 0);
}
dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event);
- input_report_key(&cinergyt2->rc_input_dev,
+ input_report_key(cinergyt2->rc_input_dev,
cinergyt2->rc_input_event, 1);
cinergyt2->rc_last_code = rc_events[n].value;
}
@@ -752,7 +754,59 @@
up(&cinergyt2->sem);
}
-#endif
+
+static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2)
+{
+ struct input_dev *input_dev;
+ int i;
+
+ cinergyt2->rc_input_dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys));
+ strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys));
+ cinergyt2->rc_input_event = KEY_MAX;
+ cinergyt2->rc_last_code = ~0;
+ INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2);
+
+ input_dev->name = DRIVER_NAME " remote control";
+ input_dev->phys = cinergyt2->phys;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ for (i = 0; ARRAY_SIZE(rc_keys); i += 3)
+ set_bit(rc_keys[i + 2], input_dev->keybit);
+ input_dev->keycodesize = 0;
+ input_dev->keycodemax = 0;
+
+ input_register_device(cinergyt2->rc_input_dev);
+ schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
+}
+
+static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2)
+{
+ cancel_delayed_work(&cinergyt2->rc_query_work);
+ flush_scheduled_work();
+ input_unregister_device(cinergyt2->rc_input_dev);
+}
+
+static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2)
+{
+ cancel_delayed_work(&cinergyt2->rc_query_work);
+}
+
+static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2)
+{
+ schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
+}
+
+#else
+
+static inline int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) { return 0; }
+static inline void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) { }
+static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) { }
+static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) { }
+
+#endif /* ENABLE_RC */
static void cinergyt2_query (void *data)
{
@@ -789,9 +843,6 @@
{
struct cinergyt2 *cinergyt2;
int err;
-#ifdef ENABLE_RC
- int i;
-#endif
if (!(cinergyt2 = kmalloc (sizeof(struct cinergyt2), GFP_KERNEL))) {
dprintk(1, "out of memory?!?\n");
@@ -846,30 +897,17 @@
&cinergyt2_fe_template, cinergyt2,
DVB_DEVICE_FRONTEND);
-#ifdef ENABLE_RC
- cinergyt2->rc_input_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- cinergyt2->rc_input_dev.keycodesize = 0;
- cinergyt2->rc_input_dev.keycodemax = 0;
- cinergyt2->rc_input_dev.name = DRIVER_NAME " remote control";
+ err = cinergyt2_register_rc(cinergyt2);
+ if (err)
+ goto bailout;
- for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3)
- set_bit(rc_keys[i + 2], cinergyt2->rc_input_dev.keybit);
-
- input_register_device(&cinergyt2->rc_input_dev);
-
- cinergyt2->rc_input_event = KEY_MAX;
- cinergyt2->rc_last_code = ~0;
-
- INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2);
- schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
-#endif
return 0;
bailout:
dvb_dmxdev_release(&cinergyt2->dmxdev);
dvb_dmx_release(&cinergyt2->demux);
- dvb_unregister_adapter (&cinergyt2->adapter);
- cinergyt2_free_stream_urbs (cinergyt2);
+ dvb_unregister_adapter(&cinergyt2->adapter);
+ cinergyt2_free_stream_urbs(cinergyt2);
kfree(cinergyt2);
return -ENOMEM;
}
@@ -881,11 +919,7 @@
if (down_interruptible(&cinergyt2->sem))
return;
-#ifdef ENABLE_RC
- cancel_delayed_work(&cinergyt2->rc_query_work);
- flush_scheduled_work();
- input_unregister_device(&cinergyt2->rc_input_dev);
-#endif
+ cinergyt2_unregister_rc(cinergyt2);
cinergyt2->demux.dmx.close(&cinergyt2->demux.dmx);
dvb_net_release(&cinergyt2->dvbnet);
@@ -908,9 +942,8 @@
if (state.event > PM_EVENT_ON) {
struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf);
-#ifdef ENABLE_RC
- cancel_delayed_work(&cinergyt2->rc_query_work);
-#endif
+
+ cinergyt2_suspend_rc(cinergyt2);
cancel_delayed_work(&cinergyt2->query_work);
if (cinergyt2->streaming)
cinergyt2_stop_stream_xfer(cinergyt2);
@@ -938,9 +971,8 @@
schedule_delayed_work(&cinergyt2->query_work, HZ/2);
}
-#ifdef ENABLE_RC
- schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
-#endif
+ cinergyt2_resume_rc(cinergyt2);
+
up(&cinergyt2->sem);
return 0;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 88757e2..2aa767f 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -36,6 +36,7 @@
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/rwsem.h>
+#include <linux/sched.h>
#include "dvb_ca_en50221.h"
#include "dvb_ringbuffer.h"
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 4b7adca..477b4fa 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -235,7 +235,7 @@
S_IFCHR | S_IRUSR | S_IWUSR,
"dvb/adapter%d/%s%d", adap->num, dnames[type], id);
- class_device_create(dvb_class, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
+ class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
NULL, "dvb%d.%s%d", adap->num, dnames[type], id);
dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n",
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index 5aa12eb..b595476 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -151,7 +151,7 @@
.cold_ids = { &dtt200u_usb_table[0], NULL },
.warm_ids = { &dtt200u_usb_table[1], NULL },
},
- { 0 },
+ { NULL },
}
};
@@ -192,7 +192,7 @@
.cold_ids = { &dtt200u_usb_table[2], NULL },
.warm_ids = { &dtt200u_usb_table[3], NULL },
},
- { 0 },
+ { NULL },
}
};
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index fc7800f..e5c6d98 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -39,9 +39,9 @@
d->last_event = event;
case REMOTE_KEY_REPEAT:
deb_rc("key repeated\n");
- input_event(&d->rc_input_dev, EV_KEY, d->last_event, 1);
- input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0);
- input_sync(&d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, event, 1);
+ input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
+ input_sync(d->rc_input_dev);
break;
default:
break;
@@ -53,8 +53,8 @@
deb_rc("NO KEY PRESSED\n");
if (d->last_state != REMOTE_NO_KEY_PRESSED) {
deb_rc("releasing event %d\n",d->last_event);
- input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0);
- input_sync(&d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
+ input_sync(d->rc_input_dev);
}
d->last_state = REMOTE_NO_KEY_PRESSED;
d->last_event = 0;
@@ -63,8 +63,8 @@
deb_rc("KEY PRESSED\n");
deb_rc("pressing event %d\n",event);
- input_event(&d->rc_input_dev, EV_KEY, event, 1);
- input_sync(&d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, event, 1);
+ input_sync(d->rc_input_dev);
d->last_event = event;
d->last_state = REMOTE_KEY_PRESSED;
@@ -73,8 +73,8 @@
deb_rc("KEY_REPEAT\n");
if (d->last_state != REMOTE_NO_KEY_PRESSED) {
deb_rc("repeating event %d\n",d->last_event);
- input_event(&d->rc_input_dev, EV_KEY, d->last_event, 2);
- input_sync(&d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, d->last_event, 2);
+ input_sync(d->rc_input_dev);
d->last_state = REMOTE_KEY_REPEAT;
}
default:
@@ -89,24 +89,30 @@
int dvb_usb_remote_init(struct dvb_usb_device *d)
{
int i;
+
if (d->props.rc_key_map == NULL ||
d->props.rc_query == NULL ||
dvb_usb_disable_rc_polling)
return 0;
- /* Initialise the remote-control structures.*/
- init_input_dev(&d->rc_input_dev);
+ usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
+ strlcpy(d->rc_phys, "/ir0", sizeof(d->rc_phys));
- d->rc_input_dev.evbit[0] = BIT(EV_KEY);
- d->rc_input_dev.keycodesize = sizeof(unsigned char);
- d->rc_input_dev.keycodemax = KEY_MAX;
- d->rc_input_dev.name = "IR-receiver inside an USB DVB receiver";
+ d->rc_input_dev = input_allocate_device();
+ if (!d->rc_input_dev)
+ return -ENOMEM;
+
+ d->rc_input_dev->evbit[0] = BIT(EV_KEY);
+ d->rc_input_dev->keycodesize = sizeof(unsigned char);
+ d->rc_input_dev->keycodemax = KEY_MAX;
+ d->rc_input_dev->name = "IR-receiver inside an USB DVB receiver";
+ d->rc_input_dev->phys = d->rc_phys;
/* set the bits for the keys */
- deb_rc("key map size: %d\n",d->props.rc_key_map_size);
+ deb_rc("key map size: %d\n", d->props.rc_key_map_size);
for (i = 0; i < d->props.rc_key_map_size; i++) {
deb_rc("setting bit for event %d item %d\n",d->props.rc_key_map[i].event, i);
- set_bit(d->props.rc_key_map[i].event, d->rc_input_dev.keybit);
+ set_bit(d->props.rc_key_map[i].event, d->rc_input_dev->keybit);
}
/* Start the remote-control polling. */
@@ -114,14 +120,14 @@
d->props.rc_interval = 100; /* default */
/* setting these two values to non-zero, we have to manage key repeats */
- d->rc_input_dev.rep[REP_PERIOD] = d->props.rc_interval;
- d->rc_input_dev.rep[REP_DELAY] = d->props.rc_interval + 150;
+ d->rc_input_dev->rep[REP_PERIOD] = d->props.rc_interval;
+ d->rc_input_dev->rep[REP_DELAY] = d->props.rc_interval + 150;
- input_register_device(&d->rc_input_dev);
+ input_register_device(d->rc_input_dev);
INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d);
- info("schedule remote query interval to %d msecs.",d->props.rc_interval);
+ info("schedule remote query interval to %d msecs.", d->props.rc_interval);
schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval));
d->state |= DVB_USB_STATE_REMOTE;
@@ -134,7 +140,7 @@
if (d->state & DVB_USB_STATE_REMOTE) {
cancel_delayed_work(&d->rc_query_work);
flush_scheduled_work();
- input_unregister_device(&d->rc_input_dev);
+ input_unregister_device(d->rc_input_dev);
}
d->state &= ~DVB_USB_STATE_REMOTE;
return 0;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 0e4f103..b4a1a98 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -300,7 +300,8 @@
int (*fe_init) (struct dvb_frontend *);
/* remote control */
- struct input_dev rc_input_dev;
+ struct input_dev *rc_input_dev;
+ char rc_phys[64];
struct work_struct rc_query_work;
u32 last_event;
int last_state;
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 0f57abe..75765e3 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -247,7 +247,7 @@
.cold_ids = { &vp7045_usb_table[2], NULL },
.warm_ids = { &vp7045_usb_table[3], NULL },
},
- { 0 },
+ { NULL },
}
};
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index f5fdc5c..f6d4ee7 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -36,6 +36,9 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "bcm3510.h"
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index 21433e1..6b05536 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -27,6 +27,8 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dib3000-common.h"
#include "dib3000mb_priv.h"
diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
index 441de66..c024fad 100644
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ b/drivers/media/dvb/frontends/dib3000mc.c
@@ -26,6 +26,8 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dib3000-common.h"
#include "dib3000mc_priv.h"
diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c
index cff93b9..794be52 100644
--- a/drivers/media/dvb/frontends/dvb_dummy_fe.c
+++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c
@@ -22,6 +22,8 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "dvb_dummy_fe.h"
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index 7142b9c..8dde72b 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -37,6 +37,8 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index e455aec..e384549 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -29,6 +29,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "mt312_priv.h"
diff --git a/drivers/media/dvb/frontends/mt352.c b/drivers/media/dvb/frontends/mt352.c
index cc1bc0e..f0c610f 100644
--- a/drivers/media/dvb/frontends/mt352.c
+++ b/drivers/media/dvb/frontends/mt352.c
@@ -35,6 +35,8 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "mt352_priv.h"
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
index 35a1d60..30786b1 100644
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ b/drivers/media/dvb/frontends/nxt2002.c
@@ -32,6 +32,8 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "nxt2002.h"
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index b6d0eec..817b044 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -36,6 +36,8 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c
index ad56a99..8a9db23 100644
--- a/drivers/media/dvb/frontends/or51211.c
+++ b/drivers/media/dvb/frontends/or51211.c
@@ -34,6 +34,8 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index c7fe27f..f265418 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -26,6 +26,8 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <asm/div64.h>
#include "dvb_frontend.h"
#include "s5h1420.h"
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 764a95a..1c6b2e9 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -32,6 +32,8 @@
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "sp8870.h"
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index d868a69..73384e7 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -14,6 +14,8 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "sp887x.h"
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 8d09afd..6122ba7 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -24,6 +24,8 @@
#include <linux/module.h>
#include <linux/string.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "stv0297.h"
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 2d62931..889d925 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -48,6 +48,7 @@
#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <asm/div64.h>
#include "dvb_frontend.h"
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 74cea9f..3529c61 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -32,6 +32,10 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
#include "dvb_frontend.h"
#include "tda1004x.h"
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index 168e013..c05cf186 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -30,6 +30,7 @@
#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include "dvb_frontend.h"
#include "tda8083.h"
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 357a372..f5e59fc 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -15,7 +15,7 @@
static int av_cnt;
static struct av7110 *av_list[4];
-static struct input_dev input_dev;
+static struct input_dev *input_dev;
static u16 key_map [256] = {
KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7,
@@ -43,10 +43,10 @@
static void av7110_emit_keyup(unsigned long data)
{
- if (!data || !test_bit(data, input_dev.key))
+ if (!data || !test_bit(data, input_dev->key))
return;
- input_event(&input_dev, EV_KEY, data, !!0);
+ input_event(input_dev, EV_KEY, data, !!0);
}
@@ -112,13 +112,13 @@
if (timer_pending(&keyup_timer)) {
del_timer(&keyup_timer);
if (keyup_timer.data != keycode || new_toggle != old_toggle) {
- input_event(&input_dev, EV_KEY, keyup_timer.data, !!0);
- input_event(&input_dev, EV_KEY, keycode, !0);
+ input_event(input_dev, EV_KEY, keyup_timer.data, !!0);
+ input_event(input_dev, EV_KEY, keycode, !0);
} else
- input_event(&input_dev, EV_KEY, keycode, 2);
+ input_event(input_dev, EV_KEY, keycode, 2);
} else
- input_event(&input_dev, EV_KEY, keycode, !0);
+ input_event(input_dev, EV_KEY, keycode, !0);
keyup_timer.expires = jiffies + UP_TIMEOUT;
keyup_timer.data = keycode;
@@ -132,13 +132,13 @@
{
int i;
- memset(input_dev.keybit, 0, sizeof(input_dev.keybit));
+ memset(input_dev->keybit, 0, sizeof(input_dev->keybit));
- for (i = 0; i < sizeof(key_map) / sizeof(key_map[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(key_map); i++) {
if (key_map[i] > KEY_MAX)
key_map[i] = 0;
else if (key_map[i] > KEY_RESERVED)
- set_bit(key_map[i], input_dev.keybit);
+ set_bit(key_map[i], input_dev->keybit);
}
}
@@ -216,12 +216,17 @@
init_timer(&keyup_timer);
keyup_timer.data = 0;
- input_dev.name = "DVB on-card IR receiver";
- set_bit(EV_KEY, input_dev.evbit);
- set_bit(EV_REP, input_dev.evbit);
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ input_dev->name = "DVB on-card IR receiver";
+
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(EV_REP, input_dev->evbit);
input_register_keys();
- input_register_device(&input_dev);
- input_dev.timer.function = input_repeat_key;
+ input_register_device(input_dev);
+ input_dev->timer.function = input_repeat_key;
e = create_proc_entry("av7110_ir", S_IFREG | S_IRUGO | S_IWUSR, NULL);
if (e) {
@@ -256,7 +261,7 @@
if (av_cnt == 1) {
del_timer_sync(&keyup_timer);
remove_proc_entry("av7110_ir", NULL);
- input_unregister_device(&input_dev);
+ input_unregister_device(input_dev);
}
av_cnt--;
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 2980db3..51c30ba 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -64,7 +64,7 @@
struct budget_ci {
struct budget budget;
- struct input_dev input_dev;
+ struct input_dev *input_dev;
struct tasklet_struct msp430_irq_tasklet;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
@@ -145,7 +145,7 @@
static void msp430_ir_interrupt(unsigned long data)
{
struct budget_ci *budget_ci = (struct budget_ci *) data;
- struct input_dev *dev = &budget_ci->input_dev;
+ struct input_dev *dev = budget_ci->input_dev;
unsigned int code =
ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
@@ -181,25 +181,27 @@
static int msp430_ir_init(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
+ struct input_dev *input_dev;
int i;
- memset(&budget_ci->input_dev, 0, sizeof(struct input_dev));
+ budget_ci->input_dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
sprintf(budget_ci->ir_dev_name, "Budget-CI dvb ir receiver %s", saa->name);
- budget_ci->input_dev.name = budget_ci->ir_dev_name;
- set_bit(EV_KEY, budget_ci->input_dev.evbit);
+ input_dev->name = budget_ci->ir_dev_name;
- for (i = 0; i < sizeof(key_map) / sizeof(*key_map); i++)
+ set_bit(EV_KEY, input_dev->evbit);
+ for (i = 0; i < ARRAY_SIZE(key_map); i++)
if (key_map[i])
- set_bit(key_map[i], budget_ci->input_dev.keybit);
+ set_bit(key_map[i], input_dev->keybit);
- input_register_device(&budget_ci->input_dev);
+ input_register_device(budget_ci->input_dev);
- budget_ci->input_dev.timer.function = msp430_ir_debounce;
+ input_dev->timer.function = msp430_ir_debounce;
saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_06);
-
saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
return 0;
@@ -208,7 +210,7 @@
static void msp430_ir_deinit(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
- struct input_dev *dev = &budget_ci->input_dev;
+ struct input_dev *dev = budget_ci->input_dev;
saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_06);
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 3d08fc8..832d179 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -152,7 +152,8 @@
struct list_head filter_info_list;
spinlock_t filter_info_list_lock;
- struct input_dev rc_input_dev;
+ struct input_dev *rc_input_dev;
+ char rc_phys[64];
int active; /* Loaded successfully */
};
@@ -235,9 +236,9 @@
* this should/could be added later ...
* for now lets report each signal as a key down and up*/
dprintk("%s:rc signal:%d\n", __FUNCTION__, buffer[4]);
- input_report_key(&dec->rc_input_dev,rc_keys[buffer[4]-1],1);
- input_report_key(&dec->rc_input_dev,rc_keys[buffer[4]-1],0);
- input_sync(&dec->rc_input_dev);
+ input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1);
+ input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0);
+ input_sync(dec->rc_input_dev);
}
exit: retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1181,29 +1182,38 @@
(unsigned long)dec);
}
-static void ttusb_init_rc( struct ttusb_dec *dec)
+static int ttusb_init_rc(struct ttusb_dec *dec)
{
+ struct input_dev *input_dev;
u8 b[] = { 0x00, 0x01 };
int i;
- init_input_dev(&dec->rc_input_dev);
+ usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys));
+ strlcpy(dec->rc_phys, "/input0", sizeof(dec->rc_phys));
- dec->rc_input_dev.name = "ttusb_dec remote control";
- dec->rc_input_dev.evbit[0] = BIT(EV_KEY);
- dec->rc_input_dev.keycodesize = sizeof(u16);
- dec->rc_input_dev.keycodemax = 0x1a;
- dec->rc_input_dev.keycode = rc_keys;
+ dec->rc_input_dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
- for (i = 0; i < sizeof(rc_keys)/sizeof(rc_keys[0]); i++)
- set_bit(rc_keys[i], dec->rc_input_dev.keybit);
+ input_dev->name = "ttusb_dec remote control";
+ input_dev->phys = dec->rc_phys;
+ input_dev->evbit[0] = BIT(EV_KEY);
+ input_dev->keycodesize = sizeof(u16);
+ input_dev->keycodemax = 0x1a;
+ input_dev->keycode = rc_keys;
- input_register_device(&dec->rc_input_dev);
+ for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
+ set_bit(rc_keys[i], input_dev->keybit);
- if(usb_submit_urb(dec->irq_urb,GFP_KERNEL)) {
+ input_register_device(input_dev);
+
+ if (usb_submit_urb(dec->irq_urb, GFP_KERNEL))
printk("%s: usb_submit_urb failed\n",__FUNCTION__);
- }
+
/* enable irq pipe */
ttusb_dec_send_command(dec,0xb0,sizeof(b),b,NULL,NULL);
+
+ return 0;
}
static void ttusb_dec_init_v_pes(struct ttusb_dec *dec)
@@ -1513,7 +1523,7 @@
* As the irq is submitted after the interface is changed,
* this is the best method i figured out.
* Any others?*/
- if(dec->interface == TTUSB_DEC_INTERFACE_IN)
+ if (dec->interface == TTUSB_DEC_INTERFACE_IN)
usb_kill_urb(dec->irq_urb);
usb_free_urb(dec->irq_urb);
@@ -1521,7 +1531,10 @@
usb_buffer_free(dec->udev,IRQ_PACKET_SIZE,
dec->irq_buffer, dec->irq_dma_handle);
- input_unregister_device(&dec->rc_input_dev);
+ if (dec->rc_input_dev) {
+ input_unregister_device(dec->rc_input_dev);
+ dec->rc_input_dev = NULL;
+ }
}
@@ -1659,7 +1672,7 @@
ttusb_dec_set_interface(dec, TTUSB_DEC_INTERFACE_IN);
- if(enable_rc)
+ if (enable_rc)
ttusb_init_rc(dec);
return 0;
diff --git a/drivers/media/radio/miropcm20-rds.c b/drivers/media/radio/miropcm20-rds.c
index df79d5e..e092140 100644
--- a/drivers/media/radio/miropcm20-rds.c
+++ b/drivers/media/radio/miropcm20-rds.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
+#include <linux/sched.h> /* current, TASK_*, schedule_timeout() */
#include <linux/delay.h>
#include <asm/uaccess.h>
#include "miropcm20-rds-core.h"
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h
index 7a312f7..e0e7c7a 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bttvp.h
@@ -240,7 +240,7 @@
/* for gpio-connected remote control */
struct bttv_input {
- struct input_dev dev;
+ struct input_dev *dev;
struct ir_input_state ir;
char name[32];
char phys[32];
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index d81b21d..c27fe4c3 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -260,7 +260,7 @@
struct cx88_IR {
struct cx88_core *core;
- struct input_dev input;
+ struct input_dev *input;
struct ir_input_state ir;
char name[32];
char phys[32];
@@ -315,23 +315,23 @@
if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown) {
- ir_input_keydown(&ir->input, &ir->ir, data, data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input, &ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup)) {
- ir_input_keydown(&ir->input, &ir->ir, data, data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input, &ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else {
/* can't distinguish keydown/up :-/ */
- ir_input_keydown(&ir->input, &ir->ir, data, data);
- ir_input_nokey(&ir->input, &ir->ir);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_nokey(ir->input, &ir->ir);
}
}
@@ -357,13 +357,19 @@
int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
{
struct cx88_IR *ir;
+ struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
int ir_type = IR_TYPE_OTHER;
- ir = kmalloc(sizeof(*ir), GFP_KERNEL);
- if (NULL == ir)
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir, 0, sizeof(*ir));
+ }
+
+ ir->input = input_dev;
/* detect & configure */
switch (core->board) {
@@ -425,6 +431,7 @@
if (NULL == ir_codes) {
kfree(ir);
+ input_free_device(input_dev);
return -ENODEV;
}
@@ -433,19 +440,19 @@
cx88_boards[core->board].name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
- ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes);
- ir->input.name = ir->name;
- ir->input.phys = ir->phys;
- ir->input.id.bustype = BUS_PCI;
- ir->input.id.version = 1;
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
if (pci->subsystem_vendor) {
- ir->input.id.vendor = pci->subsystem_vendor;
- ir->input.id.product = pci->subsystem_device;
+ input_dev->id.vendor = pci->subsystem_vendor;
+ input_dev->id.product = pci->subsystem_device;
} else {
- ir->input.id.vendor = pci->vendor;
- ir->input.id.product = pci->device;
+ input_dev->id.vendor = pci->vendor;
+ input_dev->id.product = pci->device;
}
- ir->input.dev = &pci->dev;
+ input_dev->cdev.dev = &pci->dev;
/* record handles to ourself */
ir->core = core;
@@ -465,8 +472,7 @@
}
/* all done */
- input_register_device(&ir->input);
- printk("%s: registered IR remote control\n", core->name);
+ input_register_device(ir->input);
return 0;
}
@@ -484,7 +490,7 @@
flush_scheduled_work();
}
- input_unregister_device(&ir->input);
+ input_unregister_device(ir->input);
kfree(ir);
/* done */
@@ -515,7 +521,7 @@
if (!ir->scount) {
/* nothing to sample */
if (ir->ir.keypressed && time_after(jiffies, ir->release))
- ir_input_nokey(&ir->input, &ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
return;
}
@@ -557,7 +563,7 @@
ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f);
- ir_input_keydown(&ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff);
+ ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff);
ir->release = jiffies + msecs_to_jiffies(120);
break;
case CX88_BOARD_HAUPPAUGE:
@@ -566,7 +572,7 @@
ir_dprintk("biphase decoded: %x\n", ircode);
if ((ircode & 0xfffff000) != 0x3000)
break;
- ir_input_keydown(&ir->input, &ir->ir, ircode & 0x3f, ircode);
+ ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode);
ir->release = jiffies + msecs_to_jiffies(120);
break;
}
diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c
index b2b0384..26dd06e 100644
--- a/drivers/media/video/indycam.c
+++ b/drivers/media/video/indycam.c
@@ -9,16 +9,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/major.h>
-#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/videodev.h>
/* IndyCam decodes stream of photons into digital image representation ;-) */
@@ -44,8 +44,6 @@
#define indycam_regdump(client)
#endif
-#define VINO_ADAPTER (I2C_ALGO_SGI | I2C_HW_SGI_VINO)
-
struct indycam {
struct i2c_client *client;
int version;
@@ -300,7 +298,7 @@
static int indycam_probe(struct i2c_adapter *adap)
{
/* Indy specific crap */
- if (adap->id == VINO_ADAPTER)
+ if (adap->id == I2C_HW_SGI_VINO)
return indycam_attach(adap, INDYCAM_ADDR, 0);
/* Feel free to add probe here :-) */
return -ENODEV;
diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/ir-kbd-gpio.c
index cf292da..234151e 100644
--- a/drivers/media/video/ir-kbd-gpio.c
+++ b/drivers/media/video/ir-kbd-gpio.c
@@ -158,7 +158,7 @@
struct IR {
struct bttv_sub_device *sub;
- struct input_dev input;
+ struct input_dev *input;
struct ir_input_state ir;
char name[32];
char phys[32];
@@ -217,23 +217,23 @@
if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown) {
- ir_input_keydown(&ir->input,&ir->ir,data,data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup)) {
- ir_input_keydown(&ir->input,&ir->ir,data,data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else {
/* can't disturgissh keydown/up :-/ */
- ir_input_keydown(&ir->input,&ir->ir,data,data);
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_nokey(ir->input, &ir->ir);
}
}
@@ -268,13 +268,17 @@
{
struct bttv_sub_device *sub = to_bttv_sub_dev(dev);
struct IR *ir;
+ struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
int ir_type = IR_TYPE_OTHER;
- ir = kmalloc(sizeof(*ir),GFP_KERNEL);
- if (NULL == ir)
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir,0,sizeof(*ir));
+ }
/* detect & configure */
switch (sub->core->type) {
@@ -328,6 +332,7 @@
}
if (NULL == ir_codes) {
kfree(ir);
+ input_free_device(input_dev);
return -ENODEV;
}
@@ -341,19 +346,19 @@
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(sub->core->pci));
- ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes);
- ir->input.name = ir->name;
- ir->input.phys = ir->phys;
- ir->input.id.bustype = BUS_PCI;
- ir->input.id.version = 1;
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
if (sub->core->pci->subsystem_vendor) {
- ir->input.id.vendor = sub->core->pci->subsystem_vendor;
- ir->input.id.product = sub->core->pci->subsystem_device;
+ input_dev->id.vendor = sub->core->pci->subsystem_vendor;
+ input_dev->id.product = sub->core->pci->subsystem_device;
} else {
- ir->input.id.vendor = sub->core->pci->vendor;
- ir->input.id.product = sub->core->pci->device;
+ input_dev->id.vendor = sub->core->pci->vendor;
+ input_dev->id.product = sub->core->pci->device;
}
- ir->input.dev = &sub->core->pci->dev;
+ input_dev->cdev.dev = &sub->core->pci->dev;
if (ir->polling) {
INIT_WORK(&ir->work, ir_work, ir);
@@ -364,9 +369,8 @@
}
/* all done */
- dev_set_drvdata(dev,ir);
- input_register_device(&ir->input);
- printk(DEVNAME ": %s detected at %s\n",ir->input.name,ir->input.phys);
+ dev_set_drvdata(dev, ir);
+ input_register_device(ir->input);
return 0;
}
@@ -380,7 +384,7 @@
flush_scheduled_work();
}
- input_unregister_device(&ir->input);
+ input_unregister_device(ir->input);
kfree(ir);
return 0;
}
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 67105b9..9703d3d 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -121,10 +121,9 @@
};
-struct IR;
struct IR {
struct i2c_client c;
- struct input_dev input;
+ struct input_dev *input;
struct ir_input_state ir;
struct work_struct work;
@@ -271,9 +270,9 @@
}
if (0 == rc) {
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
} else {
- ir_input_keydown(&ir->input,&ir->ir, ir_key, ir_raw);
+ ir_input_keydown(ir->input, &ir->ir, ir_key, ir_raw);
}
}
@@ -318,11 +317,18 @@
char *name;
int ir_type;
struct IR *ir;
+ struct input_dev *input_dev;
- if (NULL == (ir = kmalloc(sizeof(struct IR),GFP_KERNEL)))
+ ir = kzalloc(sizeof(struct IR), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir,0,sizeof(*ir));
+ }
+
ir->c = client_template;
+ ir->input = input_dev;
i2c_set_clientdata(&ir->c, ir);
ir->c.adapter = adap;
@@ -375,13 +381,12 @@
ir->c.dev.bus_id);
/* init + register input device */
- ir_input_init(&ir->input,&ir->ir,ir_type,ir_codes);
- ir->input.id.bustype = BUS_I2C;
- ir->input.name = ir->c.name;
- ir->input.phys = ir->phys;
- input_register_device(&ir->input);
- printk(DEVNAME ": %s detected at %s [%s]\n",
- ir->input.name,ir->input.phys,adap->name);
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->name = ir->c.name;
+ input_dev->phys = ir->phys;
+
+ input_register_device(ir->input);
/* start polling via eventd */
INIT_WORK(&ir->work, ir_work, ir);
@@ -402,7 +407,7 @@
flush_scheduled_work();
/* unregister devices */
- input_unregister_device(&ir->input);
+ input_unregister_device(ir->input);
i2c_detach_client(&ir->c);
/* free memory */
diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c
index f0d43fc..262890c 100644
--- a/drivers/media/video/msp3400.c
+++ b/drivers/media/video/msp3400.c
@@ -1420,8 +1420,8 @@
static int msp_probe(struct i2c_adapter *adap);
static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg);
-static int msp_suspend(struct device * dev, pm_message_t state, u32 level);
-static int msp_resume(struct device * dev, u32 level);
+static int msp_suspend(struct device * dev, pm_message_t state);
+static int msp_resume(struct device * dev);
static void msp_wake_thread(struct i2c_client *client);
@@ -1821,7 +1821,7 @@
return 0;
}
-static int msp_suspend(struct device * dev, pm_message_t state, u32 level)
+static int msp_suspend(struct device * dev, pm_message_t state)
{
struct i2c_client *c = container_of(dev, struct i2c_client, dev);
@@ -1830,7 +1830,7 @@
return 0;
}
-static int msp_resume(struct device * dev, u32 level)
+static int msp_resume(struct device * dev)
{
struct i2c_client *c = container_of(dev, struct i2c_client, dev);
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 1f456c4..242cb23 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -425,9 +425,9 @@
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- ir_input_keydown(&ir->dev,&ir->ir,data,data);
+ ir_input_keydown(ir->dev, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->dev,&ir->ir);
+ ir_input_nokey(ir->dev, &ir->ir);
}
return 0;
}
@@ -456,6 +456,7 @@
int saa7134_input_init1(struct saa7134_dev *dev)
{
struct saa7134_ir *ir;
+ struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
u32 mask_keycode = 0;
u32 mask_keydown = 0;
@@ -535,10 +536,13 @@
return -ENODEV;
}
- ir = kmalloc(sizeof(*ir),GFP_KERNEL);
- if (NULL == ir)
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir,0,sizeof(*ir));
+ }
/* init hardware-specific stuff */
ir->mask_keycode = mask_keycode;
@@ -552,19 +556,19 @@
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(dev->pci));
- ir_input_init(&ir->dev, &ir->ir, ir_type, ir_codes);
- ir->dev.name = ir->name;
- ir->dev.phys = ir->phys;
- ir->dev.id.bustype = BUS_PCI;
- ir->dev.id.version = 1;
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
if (dev->pci->subsystem_vendor) {
- ir->dev.id.vendor = dev->pci->subsystem_vendor;
- ir->dev.id.product = dev->pci->subsystem_device;
+ input_dev->id.vendor = dev->pci->subsystem_vendor;
+ input_dev->id.product = dev->pci->subsystem_device;
} else {
- ir->dev.id.vendor = dev->pci->vendor;
- ir->dev.id.product = dev->pci->device;
+ input_dev->id.vendor = dev->pci->vendor;
+ input_dev->id.product = dev->pci->device;
}
- ir->dev.dev = &dev->pci->dev;
+ input_dev->cdev.dev = &dev->pci->dev;
/* all done */
dev->remote = ir;
@@ -576,8 +580,7 @@
add_timer(&ir->timer);
}
- input_register_device(&dev->remote->dev);
- printk("%s: registered input device for IR\n",dev->name);
+ input_register_device(ir->dev);
return 0;
}
@@ -586,9 +589,9 @@
if (NULL == dev->remote)
return;
- input_unregister_device(&dev->remote->dev);
if (dev->remote->polling)
del_timer_sync(&dev->remote->timer);
+ input_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
}
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 3ea0914..860b895 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -351,7 +351,7 @@
/* IR input */
struct saa7134_ir {
- struct input_dev dev;
+ struct input_dev *dev;
struct ir_input_state ir;
char name[32];
char phys[32];
diff --git a/drivers/media/video/saa7191.c b/drivers/media/video/saa7191.c
index 454f5c1..3ddbb62 100644
--- a/drivers/media/video/saa7191.c
+++ b/drivers/media/video/saa7191.c
@@ -9,16 +9,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/major.h>
-#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/videodev.h>
#include <linux/video_decoder.h>
@@ -33,8 +33,6 @@
MODULE_AUTHOR("Mikael Nousiainen <tmnousia@cc.hut.fi>");
MODULE_LICENSE("GPL");
-#define VINO_ADAPTER (I2C_ALGO_SGI | I2C_HW_SGI_VINO)
-
struct saa7191 {
struct i2c_client *client;
@@ -337,7 +335,7 @@
static int saa7191_probe(struct i2c_adapter *adap)
{
/* Always connected to VINO */
- if (adap->id == VINO_ADAPTER)
+ if (adap->id == I2C_HW_SGI_VINO)
return saa7191_attach(adap, SAA7191_ADDR, 0);
/* Feel free to add probe here :-) */
return -ENODEV;
@@ -364,7 +362,7 @@
cap->flags = VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC |
VIDEO_DECODER_SECAM | VIDEO_DECODER_AUTO;
- cap->inputs = (client->adapter->id == VINO_ADAPTER) ? 2 : 1;
+ cap->inputs = (client->adapter->id == I2C_HW_SGI_VINO) ? 2 : 1;
cap->outputs = 1;
break;
}
@@ -422,7 +420,7 @@
int *iarg = arg;
switch (client->adapter->id) {
- case VINO_ADAPTER:
+ case I2C_HW_SGI_VINO:
return saa7191_set_input(client, *iarg);
default:
if (*iarg != 0)
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 0456dda..94053f1 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -784,13 +784,13 @@
return 0;
}
-static int tda9887_suspend(struct device * dev, pm_message_t state, u32 level)
+static int tda9887_suspend(struct device * dev, pm_message_t state)
{
dprintk("tda9887: suspend\n");
return 0;
}
-static int tda9887_resume(struct device * dev, u32 level)
+static int tda9887_resume(struct device * dev)
{
struct i2c_client *c = container_of(dev, struct i2c_client, dev);
struct tda9887 *t = i2c_get_clientdata(c);
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 0557202..ad85bef 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -697,7 +697,7 @@
return 0;
}
-static int tuner_suspend(struct device *dev, pm_message_t state, u32 level)
+static int tuner_suspend(struct device *dev, pm_message_t state)
{
struct i2c_client *c = container_of (dev, struct i2c_client, dev);
struct tuner *t = i2c_get_clientdata (c);
@@ -707,7 +707,7 @@
return 0;
}
-static int tuner_resume(struct device *dev, u32 level)
+static int tuner_resume(struct device *dev)
{
struct i2c_client *c = container_of (dev, struct i2c_client, dev);
struct tuner *t = i2c_get_clientdata (c);
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index d8a0f76..ed4394e 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -26,14 +26,15 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/time.h>
#include <linux/moduleparam.h>
+#include <linux/time.h>
+#include <linux/version.h>
#ifdef CONFIG_KMOD
#include <linux/kmod.h>
diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h
index c5bcfd7..9eefedb 100644
--- a/drivers/message/i2o/core.h
+++ b/drivers/message/i2o/core.h
@@ -36,9 +36,6 @@
extern void i2o_device_remove(struct i2o_device *);
extern int i2o_device_parse_lct(struct i2o_controller *);
-extern int i2o_device_init(void);
-extern void i2o_device_exit(void);
-
/* IOP */
extern struct i2o_controller *i2o_iop_alloc(void);
extern void i2o_iop_free(struct i2o_controller *);
diff --git a/drivers/message/i2o/debug.c b/drivers/message/i2o/debug.c
index 018ca88..40d4ea8 100644
--- a/drivers/message/i2o/debug.c
+++ b/drivers/message/i2o/debug.c
@@ -90,7 +90,7 @@
};
if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE)
- printk(KERN_DEBUG "TRANSPORT_UNKNOWN_FAILURE (%0#2x)\n.",
+ printk(KERN_DEBUG "TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
req_status);
else
printk(KERN_DEBUG "TRANSPORT_%s.\n",
diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c
index 21f16ba..8eb50cd 100644
--- a/drivers/message/i2o/device.c
+++ b/drivers/message/i2o/device.c
@@ -16,6 +16,8 @@
#include <linux/module.h>
#include <linux/i2o.h>
#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "core.h"
/**
@@ -45,10 +47,10 @@
writel(type, &msg->body[0]);
return i2o_msg_post_wait(dev->iop, m, 60);
-};
+}
/**
- * i2o_device_claim - claim a device for use by an OSM
+ * i2o_device_claim - claim a device for use by an OSM
* @dev: I2O device to claim
* @drv: I2O driver which wants to claim the device
*
@@ -73,7 +75,7 @@
up(&dev->lock);
return rc;
-};
+}
/**
* i2o_device_claim_release - release a device that the OSM is using
@@ -119,7 +121,8 @@
up(&dev->lock);
return rc;
-};
+}
+
/**
* i2o_device_release - release the memory for a I2O device
@@ -135,39 +138,47 @@
pr_debug("i2o: device %s released\n", dev->bus_id);
kfree(i2o_dev);
-};
+}
+
/**
- * i2o_device_class_release - Remove I2O device attributes
- * @cd: I2O class device which is added to the I2O device class
+ * i2o_device_class_show_class_id - Displays class id of I2O device
+ * @cd: class device of which the class id should be displayed
+ * @buf: buffer into which the class id should be printed
*
- * Removes attributes from the I2O device again. Also search each device
- * on the controller for I2O devices which refert to this device as parent
- * or user and remove this links also.
+ * Returns the number of bytes which are printed into the buffer.
*/
-static void i2o_device_class_release(struct class_device *cd)
+static ssize_t i2o_device_show_class_id(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
- struct i2o_device *i2o_dev, *tmp;
- struct i2o_controller *c;
+ struct i2o_device *i2o_dev = to_i2o_device(dev);
- i2o_dev = to_i2o_device(cd->dev);
- c = i2o_dev->iop;
+ sprintf(buf, "0x%03x\n", i2o_dev->lct_data.class_id);
+ return strlen(buf) + 1;
+}
- sysfs_remove_link(&i2o_dev->device.kobj, "parent");
- sysfs_remove_link(&i2o_dev->device.kobj, "user");
+/**
+ * i2o_device_class_show_tid - Displays TID of I2O device
+ * @cd: class device of which the TID should be displayed
+ * @buf: buffer into which the class id should be printed
+ *
+ * Returns the number of bytes which are printed into the buffer.
+ */
+static ssize_t i2o_device_show_tid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2o_device *i2o_dev = to_i2o_device(dev);
- list_for_each_entry(tmp, &c->devices, list) {
- if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
- sysfs_remove_link(&tmp->device.kobj, "parent");
- if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
- sysfs_remove_link(&tmp->device.kobj, "user");
- }
-};
+ sprintf(buf, "0x%03x\n", i2o_dev->lct_data.tid);
+ return strlen(buf) + 1;
+}
-/* I2O device class */
-static struct class i2o_device_class = {
- .name = "i2o_device",
- .release = i2o_device_class_release
+struct device_attribute i2o_device_attrs[] = {
+ __ATTR(class_id, S_IRUGO, i2o_device_show_class_id, NULL),
+ __ATTR(tid, S_IRUGO, i2o_device_show_tid, NULL),
+ __ATTR_NULL
};
/**
@@ -193,11 +204,69 @@
dev->device.bus = &i2o_bus_type;
dev->device.release = &i2o_device_release;
- dev->classdev.class = &i2o_device_class;
- dev->classdev.dev = &dev->device;
return dev;
-};
+}
+
+/**
+ * i2o_setup_sysfs_links - Adds attributes to the I2O device
+ * @cd: I2O class device which is added to the I2O device class
+ *
+ * This function get called when a I2O device is added to the class. It
+ * creates the attributes for each device and creates user/parent symlink
+ * if necessary.
+ *
+ * Returns 0 on success or negative error code on failure.
+ */
+static void i2o_setup_sysfs_links(struct i2o_device *i2o_dev)
+{
+ struct i2o_controller *c = i2o_dev->iop;
+ struct i2o_device *tmp;
+
+ /* create user entries for this device */
+ tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid);
+ if (tmp && tmp != i2o_dev)
+ sysfs_create_link(&i2o_dev->device.kobj,
+ &tmp->device.kobj, "user");
+
+ /* create user entries refering to this device */
+ list_for_each_entry(tmp, &c->devices, list)
+ if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid &&
+ tmp != i2o_dev)
+ sysfs_create_link(&tmp->device.kobj,
+ &i2o_dev->device.kobj, "user");
+
+ /* create parent entries for this device */
+ tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid);
+ if (tmp && tmp != i2o_dev)
+ sysfs_create_link(&i2o_dev->device.kobj,
+ &tmp->device.kobj, "parent");
+
+ /* create parent entries refering to this device */
+ list_for_each_entry(tmp, &c->devices, list)
+ if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid &&
+ tmp != i2o_dev)
+ sysfs_create_link(&tmp->device.kobj,
+ &i2o_dev->device.kobj, "parent");
+}
+
+static void i2o_remove_sysfs_links(struct i2o_device *i2o_dev)
+{
+ struct i2o_controller *c = i2o_dev->iop;
+ struct i2o_device *tmp;
+
+ sysfs_remove_link(&i2o_dev->device.kobj, "parent");
+ sysfs_remove_link(&i2o_dev->device.kobj, "user");
+
+ list_for_each_entry(tmp, &c->devices, list) {
+ if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
+ sysfs_remove_link(&tmp->device.kobj, "parent");
+ if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
+ sysfs_remove_link(&tmp->device.kobj, "user");
+ }
+}
+
+
/**
* i2o_device_add - allocate a new I2O device and add it to the IOP
@@ -222,28 +291,25 @@
}
dev->lct_data = *entry;
+ dev->iop = c;
snprintf(dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit,
dev->lct_data.tid);
- snprintf(dev->classdev.class_id, BUS_ID_SIZE, "%d:%03x", c->unit,
- dev->lct_data.tid);
-
- dev->iop = c;
dev->device.parent = &c->device;
device_register(&dev->device);
list_add_tail(&dev->list, &c->devices);
- class_device_register(&dev->classdev);
+ i2o_setup_sysfs_links(dev);
i2o_driver_notify_device_add_all(dev);
pr_debug("i2o: device %s added\n", dev->device.bus_id);
return dev;
-};
+}
/**
* i2o_device_remove - remove an I2O device from the I2O core
@@ -256,10 +322,10 @@
void i2o_device_remove(struct i2o_device *i2o_dev)
{
i2o_driver_notify_device_remove_all(i2o_dev);
- class_device_unregister(&i2o_dev->classdev);
+ i2o_remove_sysfs_links(i2o_dev);
list_del(&i2o_dev->list);
device_unregister(&i2o_dev->device);
-};
+}
/**
* i2o_device_parse_lct - Parse a previously fetched LCT and create devices
@@ -337,99 +403,8 @@
up(&c->lct_lock);
return 0;
-};
+}
-/**
- * i2o_device_class_show_class_id - Displays class id of I2O device
- * @cd: class device of which the class id should be displayed
- * @buf: buffer into which the class id should be printed
- *
- * Returns the number of bytes which are printed into the buffer.
- */
-static ssize_t i2o_device_class_show_class_id(struct class_device *cd,
- char *buf)
-{
- struct i2o_device *dev = to_i2o_device(cd->dev);
-
- sprintf(buf, "0x%03x\n", dev->lct_data.class_id);
- return strlen(buf) + 1;
-};
-
-/**
- * i2o_device_class_show_tid - Displays TID of I2O device
- * @cd: class device of which the TID should be displayed
- * @buf: buffer into which the class id should be printed
- *
- * Returns the number of bytes which are printed into the buffer.
- */
-static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf)
-{
- struct i2o_device *dev = to_i2o_device(cd->dev);
-
- sprintf(buf, "0x%03x\n", dev->lct_data.tid);
- return strlen(buf) + 1;
-};
-
-/* I2O device class attributes */
-static CLASS_DEVICE_ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id,
- NULL);
-static CLASS_DEVICE_ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL);
-
-/**
- * i2o_device_class_add - Adds attributes to the I2O device
- * @cd: I2O class device which is added to the I2O device class
- *
- * This function get called when a I2O device is added to the class. It
- * creates the attributes for each device and creates user/parent symlink
- * if necessary.
- *
- * Returns 0 on success or negative error code on failure.
- */
-static int i2o_device_class_add(struct class_device *cd)
-{
- struct i2o_device *i2o_dev, *tmp;
- struct i2o_controller *c;
-
- i2o_dev = to_i2o_device(cd->dev);
- c = i2o_dev->iop;
-
- class_device_create_file(cd, &class_device_attr_class_id);
- class_device_create_file(cd, &class_device_attr_tid);
-
- /* create user entries for this device */
- tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid);
- if (tmp && (tmp != i2o_dev))
- sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj,
- "user");
-
- /* create user entries refering to this device */
- list_for_each_entry(tmp, &c->devices, list)
- if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
- && (tmp != i2o_dev))
- sysfs_create_link(&tmp->device.kobj,
- &i2o_dev->device.kobj, "user");
-
- /* create parent entries for this device */
- tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid);
- if (tmp && (tmp != i2o_dev))
- sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj,
- "parent");
-
- /* create parent entries refering to this device */
- list_for_each_entry(tmp, &c->devices, list)
- if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
- && (tmp != i2o_dev))
- sysfs_create_link(&tmp->device.kobj,
- &i2o_dev->device.kobj, "parent");
-
- return 0;
-};
-
-/* I2O device class interface */
-static struct class_interface i2o_device_class_interface = {
- .class = &i2o_device_class,
- .add = i2o_device_class_add
-};
/*
* Run time support routines
@@ -553,11 +528,11 @@
}
/*
- * if oper == I2O_PARAMS_TABLE_GET, get from all rows
- * if fieldcount == -1 return all fields
+ * if oper == I2O_PARAMS_TABLE_GET, get from all rows
+ * if fieldcount == -1 return all fields
* ibuf and ibuflen are unused (use NULL, 0)
- * else return specific fields
- * ibuf contains fieldindexes
+ * else return specific fields
+ * ibuf contains fieldindexes
*
* if oper == I2O_PARAMS_LIST_GET, get from specific rows
* if fieldcount == -1 return all fields
@@ -602,35 +577,6 @@
return size;
}
-/**
- * i2o_device_init - Initialize I2O devices
- *
- * Registers the I2O device class.
- *
- * Returns 0 on success or negative error code on failure.
- */
-int i2o_device_init(void)
-{
- int rc;
-
- rc = class_register(&i2o_device_class);
- if (rc)
- return rc;
-
- return class_interface_register(&i2o_device_class_interface);
-};
-
-/**
- * i2o_device_exit - I2O devices exit function
- *
- * Unregisters the I2O device class.
- */
-void i2o_device_exit(void)
-{
- class_interface_register(&i2o_device_class_interface);
- class_unregister(&i2o_device_class);
-};
-
EXPORT_SYMBOL(i2o_device_claim);
EXPORT_SYMBOL(i2o_device_claim_release);
EXPORT_SYMBOL(i2o_parm_field_get);
diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c
index 739bfde..0fb9c4e 100644
--- a/drivers/message/i2o/driver.c
+++ b/drivers/message/i2o/driver.c
@@ -17,6 +17,9 @@
#include <linux/module.h>
#include <linux/rwsem.h>
#include <linux/i2o.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "core.h"
#define OSM_NAME "i2o"
@@ -58,9 +61,12 @@
};
/* I2O bus type */
+extern struct device_attribute i2o_device_attrs[];
+
struct bus_type i2o_bus_type = {
.name = "i2o",
.match = i2o_bus_match,
+ .dev_attrs = i2o_device_attrs,
};
/**
diff --git a/drivers/message/i2o/exec-osm.c b/drivers/message/i2o/exec-osm.c
index bda2c62..b675b4e 100644
--- a/drivers/message/i2o/exec-osm.c
+++ b/drivers/message/i2o/exec-osm.c
@@ -30,6 +30,10 @@
#include <linux/module.h>
#include <linux/i2o.h>
#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <asm/param.h> /* HZ */
#include "core.h"
#define OSM_NAME "exec-osm"
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index 42f8b81..61b837d 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -28,6 +28,7 @@
#include <linux/module.h>
#include <linux/i2o.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include "core.h"
#define OSM_NAME "i2o"
@@ -833,6 +834,7 @@
list_for_each_entry_safe(dev, tmp, &c->devices, list)
i2o_device_remove(dev);
+ class_device_unregister(c->classdev);
device_del(&c->device);
/* Ask the IOP to switch to RESET state */
@@ -1077,9 +1079,7 @@
};
/* I2O controller class */
-static struct class i2o_controller_class = {
- .name = "i2o_controller",
-};
+static struct class *i2o_controller_class;
/**
* i2o_iop_alloc - Allocate and initialize a i2o_controller struct
@@ -1110,14 +1110,10 @@
sprintf(c->name, "iop%d", c->unit);
device_initialize(&c->device);
- class_device_initialize(&c->classdev);
c->device.release = &i2o_iop_release;
- c->classdev.class = &i2o_controller_class;
- c->classdev.dev = &c->device;
snprintf(c->device.bus_id, BUS_ID_SIZE, "iop%d", c->unit);
- snprintf(c->classdev.class_id, BUS_ID_SIZE, "iop%d", c->unit);
#if BITS_PER_LONG == 64
spin_lock_init(&c->context_list_lock);
@@ -1146,7 +1142,9 @@
goto iop_reset;
}
- if ((rc = class_device_add(&c->classdev))) {
+ c->classdev = class_device_create(i2o_controller_class, NULL, MKDEV(0,0),
+ &c->device, "iop%d", c->unit);
+ if (IS_ERR(c->classdev)) {
osm_err("%s: could not add controller class\n", c->name);
goto device_del;
}
@@ -1184,7 +1182,7 @@
return 0;
class_del:
- class_device_del(&c->classdev);
+ class_device_unregister(c->classdev);
device_del:
device_del(&c->device);
@@ -1246,13 +1244,10 @@
printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
- rc = i2o_device_init();
- if (rc)
- goto exit;
-
- if ((rc = class_register(&i2o_controller_class))) {
+ i2o_controller_class = class_create(THIS_MODULE, "i2o_controller");
+ if (IS_ERR(i2o_controller_class)) {
osm_err("can't register class i2o_controller\n");
- goto device_exit;
+ goto exit;
}
if ((rc = i2o_driver_init()))
@@ -1273,10 +1268,7 @@
i2o_driver_exit();
class_exit:
- class_unregister(&i2o_controller_class);
-
- device_exit:
- i2o_device_exit();
+ class_destroy(i2o_controller_class);
exit:
return rc;
@@ -1292,8 +1284,7 @@
i2o_pci_exit();
i2o_exec_exit();
i2o_driver_exit();
- class_unregister(&i2o_controller_class);
- i2o_device_exit();
+ class_destroy(i2o_controller_class);
};
module_init(i2o_iop_init);
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index e9806fb..720e7a3 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -219,26 +219,24 @@
return 0;
}
-static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state, u32 level)
+static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state)
{
struct mcp *mcp = dev_get_drvdata(dev);
- if (level == SUSPEND_DISABLE) {
- priv(mcp)->mccr0 = Ser4MCCR0;
- priv(mcp)->mccr1 = Ser4MCCR1;
- Ser4MCCR0 &= ~MCCR0_MCE;
- }
+ priv(mcp)->mccr0 = Ser4MCCR0;
+ priv(mcp)->mccr1 = Ser4MCCR1;
+ Ser4MCCR0 &= ~MCCR0_MCE;
+
return 0;
}
-static int mcp_sa11x0_resume(struct device *dev, u32 level)
+static int mcp_sa11x0_resume(struct device *dev)
{
struct mcp *mcp = dev_get_drvdata(dev);
- if (level == RESUME_RESTORE_STATE) {
- Ser4MCCR1 = priv(mcp)->mccr1;
- Ser4MCCR0 = priv(mcp)->mccr0;
- }
+ Ser4MCCR1 = priv(mcp)->mccr1;
+ Ser4MCCR0 = priv(mcp)->mccr0;
+
return 0;
}
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index a260f83..a984c0e 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -32,15 +32,18 @@
#include <linux/suspend.h>
#include <linux/slab.h>
#include <linux/kthread.h>
+#include <linux/delay.h>
#include <asm/dma.h>
#include <asm/semaphore.h>
+#include <asm/arch/collie.h>
+#include <asm/mach-types.h>
#include "ucb1x00.h"
struct ucb1x00_ts {
- struct input_dev idev;
+ struct input_dev *idev;
struct ucb1x00 *ucb;
wait_queue_head_t irq_wait;
@@ -56,16 +59,16 @@
static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y)
{
- input_report_abs(&ts->idev, ABS_X, x);
- input_report_abs(&ts->idev, ABS_Y, y);
- input_report_abs(&ts->idev, ABS_PRESSURE, pressure);
- input_sync(&ts->idev);
+ input_report_abs(ts->idev, ABS_X, x);
+ input_report_abs(ts->idev, ABS_Y, y);
+ input_report_abs(ts->idev, ABS_PRESSURE, pressure);
+ input_sync(ts->idev);
}
static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts)
{
- input_report_abs(&ts->idev, ABS_PRESSURE, 0);
- input_sync(&ts->idev);
+ input_report_abs(ts->idev, ABS_PRESSURE, 0);
+ input_sync(ts->idev);
}
/*
@@ -85,12 +88,23 @@
*/
static inline unsigned int ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts)
{
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ if (machine_is_collie()) {
+ ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0);
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW |
+ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
- return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
+ udelay(55);
+
+ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_AD2, ts->adcsync);
+ } else {
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+
+ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
+ }
}
/*
@@ -101,12 +115,16 @@
*/
static inline unsigned int ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts)
{
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ if (machine_is_collie())
+ ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
+ else {
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ }
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
@@ -124,12 +142,17 @@
*/
static inline unsigned int ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts)
{
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ if (machine_is_collie())
+ ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
+ else {
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ }
+
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
@@ -163,6 +186,15 @@
return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
}
+static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts)
+{
+ unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);
+ if (machine_is_collie())
+ return (!(val & (UCB_TS_CR_TSPX_LOW)));
+ else
+ return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+}
+
/*
* This is a RT kernel thread that handles the ADC accesses
* (mainly so we can use semaphores in the UCB1200 core code
@@ -186,7 +218,7 @@
add_wait_queue(&ts->irq_wait, &wait);
while (!kthread_should_stop()) {
- unsigned int x, y, p, val;
+ unsigned int x, y, p;
signed long timeout;
ts->restart = 0;
@@ -206,12 +238,12 @@
msleep(10);
ucb1x00_enable(ts->ucb);
- val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);
- if (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW)) {
+
+ if (ucb1x00_ts_pen_down(ts)) {
set_task_state(tsk, TASK_INTERRUPTIBLE);
- ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
+ ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
ucb1x00_disable(ts->ucb);
/*
@@ -341,26 +373,30 @@
{
struct ucb1x00_ts *ts;
- ts = kmalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
+ ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
if (!ts)
return -ENOMEM;
- memset(ts, 0, sizeof(struct ucb1x00_ts));
+ ts->idev = input_allocate_device();
+ if (!ts->idev) {
+ kfree(ts);
+ return -ENOMEM;
+ }
ts->ucb = dev->ucb;
ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
- ts->idev.name = "Touchscreen panel";
- ts->idev.id.product = ts->ucb->id;
- ts->idev.open = ucb1x00_ts_open;
- ts->idev.close = ucb1x00_ts_close;
+ ts->idev->name = "Touchscreen panel";
+ ts->idev->id.product = ts->ucb->id;
+ ts->idev->open = ucb1x00_ts_open;
+ ts->idev->close = ucb1x00_ts_close;
- __set_bit(EV_ABS, ts->idev.evbit);
- __set_bit(ABS_X, ts->idev.absbit);
- __set_bit(ABS_Y, ts->idev.absbit);
- __set_bit(ABS_PRESSURE, ts->idev.absbit);
+ __set_bit(EV_ABS, ts->idev->evbit);
+ __set_bit(ABS_X, ts->idev->absbit);
+ __set_bit(ABS_Y, ts->idev->absbit);
+ __set_bit(ABS_PRESSURE, ts->idev->absbit);
- input_register_device(&ts->idev);
+ input_register_device(ts->idev);
dev->priv = ts;
@@ -370,7 +406,8 @@
static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
{
struct ucb1x00_ts *ts = dev->priv;
- input_unregister_device(&ts->idev);
+
+ input_unregister_device(ts->idev);
kfree(ts);
}
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 4991bbd..c483a86 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -60,4 +60,13 @@
If unsure, say N.
+config MMC_AU1X
+ tristate "Alchemy AU1XX0 MMC Card Interface support"
+ depends on SOC_AU1X00 && MMC
+ help
+ This selects the AMD Alchemy(R) Multimedia card interface.
+ iIf you have a Alchemy platform with a MMC slot, say Y or M here.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 89510c2..e351e71 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -18,5 +18,6 @@
obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
+obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
mmc_core-y := mmc.o mmc_queue.o mmc_sysfs.o
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
new file mode 100644
index 0000000..aaf0463
--- /dev/null
+++ b/drivers/mmc/au1xmmc.c
@@ -0,0 +1,1026 @@
+/*
+ * linux/drivers/mmc/au1xmmc.c - AU1XX0 MMC driver
+ *
+ * Copyright (c) 2005, Advanced Micro Devices, Inc.
+ *
+ * Developed with help from the 2.4.30 MMC AU1XXX controller including
+ * the following copyright notices:
+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
+ * Portions Copyright (C) 2002 Embedix, Inc
+ * Copyright 2002 Hewlett-Packard Company
+
+ * 2.6 version of this driver inspired by:
+ * (drivers/mmc/wbsd.c) Copyright (C) 2004-2005 Pierre Ossman,
+ * All Rights Reserved.
+ * (drivers/mmc/pxa.c) Copyright (C) 2003 Russell King,
+ * All Rights Reserved.
+ *
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Why is a timer used to detect insert events?
+ *
+ * From the AU1100 MMC application guide:
+ * If the Au1100-based design is intended to support both MultiMediaCards
+ * and 1- or 4-data bit SecureDigital cards, then the solution is to
+ * connect a weak (560KOhm) pull-up resistor to connector pin 1.
+ * In doing so, a MMC card never enters SPI-mode communications,
+ * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective
+ * (the low to high transition will not occur).
+ *
+ * So we use the timer to check the status manually.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/protocol.h>
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/scatterlist.h>
+
+#include <au1xxx.h>
+#include "au1xmmc.h"
+
+#define DRIVER_NAME "au1xxx-mmc"
+
+/* Set this to enable special debugging macros */
+/* #define MMC_DEBUG */
+
+#ifdef MMC_DEBUG
+#define DEBUG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args)
+#else
+#define DEBUG(fmt, idx, args...)
+#endif
+
+const struct {
+ u32 iobase;
+ u32 tx_devid, rx_devid;
+ u16 bcsrpwr;
+ u16 bcsrstatus;
+ u16 wpstatus;
+} au1xmmc_card_table[] = {
+ { SD0_BASE, DSCR_CMD0_SDMS_TX0, DSCR_CMD0_SDMS_RX0,
+ BCSR_BOARD_SD0PWR, BCSR_INT_SD0INSERT, BCSR_STATUS_SD0WP },
+#ifndef CONFIG_MIPS_DB1200
+ { SD1_BASE, DSCR_CMD0_SDMS_TX1, DSCR_CMD0_SDMS_RX1,
+ BCSR_BOARD_DS1PWR, BCSR_INT_SD1INSERT, BCSR_STATUS_SD1WP }
+#endif
+};
+
+#define AU1XMMC_CONTROLLER_COUNT \
+ (sizeof(au1xmmc_card_table) / sizeof(au1xmmc_card_table[0]))
+
+/* This array stores pointers for the hosts (used by the IRQ handler) */
+struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT];
+static int dma = 1;
+
+#ifdef MODULE
+MODULE_PARM(dma, "i");
+MODULE_PARM_DESC(dma, "Use DMA engine for data transfers (0 = disabled)");
+#endif
+
+static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
+{
+ u32 val = au_readl(HOST_CONFIG(host));
+ val |= mask;
+ au_writel(val, HOST_CONFIG(host));
+ au_sync();
+}
+
+static inline void FLUSH_FIFO(struct au1xmmc_host *host)
+{
+ u32 val = au_readl(HOST_CONFIG2(host));
+
+ au_writel(val | SD_CONFIG2_FF, HOST_CONFIG2(host));
+ au_sync_delay(1);
+
+ /* SEND_STOP will turn off clock control - this re-enables it */
+ val &= ~SD_CONFIG2_DF;
+
+ au_writel(val, HOST_CONFIG2(host));
+ au_sync();
+}
+
+static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
+{
+ u32 val = au_readl(HOST_CONFIG(host));
+ val &= ~mask;
+ au_writel(val, HOST_CONFIG(host));
+ au_sync();
+}
+
+static inline void SEND_STOP(struct au1xmmc_host *host)
+{
+
+ /* We know the value of CONFIG2, so avoid a read we don't need */
+ u32 mask = SD_CONFIG2_EN;
+
+ WARN_ON(host->status != HOST_S_DATA);
+ host->status = HOST_S_STOP;
+
+ au_writel(mask | SD_CONFIG2_DF, HOST_CONFIG2(host));
+ au_sync();
+
+ /* Send the stop commmand */
+ au_writel(STOP_CMD, HOST_CMD(host));
+}
+
+static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
+{
+
+ u32 val = au1xmmc_card_table[host->id].bcsrpwr;
+
+ bcsr->board &= ~val;
+ if (state) bcsr->board |= val;
+
+ au_sync_delay(1);
+}
+
+static inline int au1xmmc_card_inserted(struct au1xmmc_host *host)
+{
+ return (bcsr->sig_status & au1xmmc_card_table[host->id].bcsrstatus)
+ ? 1 : 0;
+}
+
+static inline int au1xmmc_card_readonly(struct au1xmmc_host *host)
+{
+ return (bcsr->status & au1xmmc_card_table[host->id].wpstatus)
+ ? 1 : 0;
+}
+
+static void au1xmmc_finish_request(struct au1xmmc_host *host)
+{
+
+ struct mmc_request *mrq = host->mrq;
+
+ host->mrq = NULL;
+ host->flags &= HOST_F_ACTIVE;
+
+ host->dma.len = 0;
+ host->dma.dir = 0;
+
+ host->pio.index = 0;
+ host->pio.offset = 0;
+ host->pio.len = 0;
+
+ host->status = HOST_S_IDLE;
+
+ bcsr->disk_leds |= (1 << 8);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void au1xmmc_tasklet_finish(unsigned long param)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *) param;
+ au1xmmc_finish_request(host);
+}
+
+static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
+ struct mmc_command *cmd)
+{
+
+ u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
+
+ switch(cmd->flags) {
+ case MMC_RSP_R1:
+ mmccmd |= SD_CMD_RT_1;
+ break;
+ case MMC_RSP_R1B:
+ mmccmd |= SD_CMD_RT_1B;
+ break;
+ case MMC_RSP_R2:
+ mmccmd |= SD_CMD_RT_2;
+ break;
+ case MMC_RSP_R3:
+ mmccmd |= SD_CMD_RT_3;
+ break;
+ }
+
+ switch(cmd->opcode) {
+ case MMC_READ_SINGLE_BLOCK:
+ case SD_APP_SEND_SCR:
+ mmccmd |= SD_CMD_CT_2;
+ break;
+ case MMC_READ_MULTIPLE_BLOCK:
+ mmccmd |= SD_CMD_CT_4;
+ break;
+ case MMC_WRITE_BLOCK:
+ mmccmd |= SD_CMD_CT_1;
+ break;
+
+ case MMC_WRITE_MULTIPLE_BLOCK:
+ mmccmd |= SD_CMD_CT_3;
+ break;
+ case MMC_STOP_TRANSMISSION:
+ mmccmd |= SD_CMD_CT_7;
+ break;
+ }
+
+ au_writel(cmd->arg, HOST_CMDARG(host));
+ au_sync();
+
+ if (wait)
+ IRQ_OFF(host, SD_CONFIG_CR);
+
+ au_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
+ au_sync();
+
+ /* Wait for the command to go on the line */
+
+ while(1) {
+ if (!(au_readl(HOST_CMD(host)) & SD_CMD_GO))
+ break;
+ }
+
+ /* Wait for the command to come back */
+
+ if (wait) {
+ u32 status = au_readl(HOST_STATUS(host));
+
+ while(!(status & SD_STATUS_CR))
+ status = au_readl(HOST_STATUS(host));
+
+ /* Clear the CR status */
+ au_writel(SD_STATUS_CR, HOST_STATUS(host));
+
+ IRQ_ON(host, SD_CONFIG_CR);
+ }
+
+ return MMC_ERR_NONE;
+}
+
+static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
+{
+
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_data *data;
+ u32 crc;
+
+ WARN_ON(host->status != HOST_S_DATA && host->status != HOST_S_STOP);
+
+ if (host->mrq == NULL)
+ return;
+
+ data = mrq->cmd->data;
+
+ if (status == 0)
+ status = au_readl(HOST_STATUS(host));
+
+ /* The transaction is really over when the SD_STATUS_DB bit is clear */
+
+ while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
+ status = au_readl(HOST_STATUS(host));
+
+ data->error = MMC_ERR_NONE;
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
+
+ /* Process any errors */
+
+ crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
+ if (host->flags & HOST_F_XMIT)
+ crc |= ((status & 0x07) == 0x02) ? 0 : 1;
+
+ if (crc)
+ data->error = MMC_ERR_BADCRC;
+
+ /* Clear the CRC bits */
+ au_writel(SD_STATUS_WC | SD_STATUS_RC, HOST_STATUS(host));
+
+ data->bytes_xfered = 0;
+
+ if (data->error == MMC_ERR_NONE) {
+ if (host->flags & HOST_F_DMA) {
+ u32 chan = DMA_CHANNEL(host);
+
+ chan_tab_t *c = *((chan_tab_t **) chan);
+ au1x_dma_chan_t *cp = c->chan_ptr;
+ data->bytes_xfered = cp->ddma_bytecnt;
+ }
+ else
+ data->bytes_xfered =
+ (data->blocks * (1 << data->blksz_bits)) -
+ host->pio.len;
+ }
+
+ au1xmmc_finish_request(host);
+}
+
+static void au1xmmc_tasklet_data(unsigned long param)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *) param;
+
+ u32 status = au_readl(HOST_STATUS(host));
+ au1xmmc_data_complete(host, status);
+}
+
+#define AU1XMMC_MAX_TRANSFER 8
+
+static void au1xmmc_send_pio(struct au1xmmc_host *host)
+{
+
+ struct mmc_data *data = 0;
+ int sg_len, max, count = 0;
+ unsigned char *sg_ptr;
+ u32 status = 0;
+ struct scatterlist *sg;
+
+ data = host->mrq->data;
+
+ if (!(host->flags & HOST_F_XMIT))
+ return;
+
+ /* This is the pointer to the data buffer */
+ sg = &data->sg[host->pio.index];
+ sg_ptr = page_address(sg->page) + sg->offset + host->pio.offset;
+
+ /* This is the space left inside the buffer */
+ sg_len = data->sg[host->pio.index].length - host->pio.offset;
+
+ /* Check to if we need less then the size of the sg_buffer */
+
+ max = (sg_len > host->pio.len) ? host->pio.len : sg_len;
+ if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER;
+
+ for(count = 0; count < max; count++ ) {
+ unsigned char val;
+
+ status = au_readl(HOST_STATUS(host));
+
+ if (!(status & SD_STATUS_TH))
+ break;
+
+ val = *sg_ptr++;
+
+ au_writel((unsigned long) val, HOST_TXPORT(host));
+ au_sync();
+ }
+
+ host->pio.len -= count;
+ host->pio.offset += count;
+
+ if (count == sg_len) {
+ host->pio.index++;
+ host->pio.offset = 0;
+ }
+
+ if (host->pio.len == 0) {
+ IRQ_OFF(host, SD_CONFIG_TH);
+
+ if (host->flags & HOST_F_STOP)
+ SEND_STOP(host);
+
+ tasklet_schedule(&host->data_task);
+ }
+}
+
+static void au1xmmc_receive_pio(struct au1xmmc_host *host)
+{
+
+ struct mmc_data *data = 0;
+ int sg_len = 0, max = 0, count = 0;
+ unsigned char *sg_ptr = 0;
+ u32 status = 0;
+ struct scatterlist *sg;
+
+ data = host->mrq->data;
+
+ if (!(host->flags & HOST_F_RECV))
+ return;
+
+ max = host->pio.len;
+
+ if (host->pio.index < host->dma.len) {
+ sg = &data->sg[host->pio.index];
+ sg_ptr = page_address(sg->page) + sg->offset + host->pio.offset;
+
+ /* This is the space left inside the buffer */
+ sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset;
+
+ /* Check to if we need less then the size of the sg_buffer */
+ if (sg_len < max) max = sg_len;
+ }
+
+ if (max > AU1XMMC_MAX_TRANSFER)
+ max = AU1XMMC_MAX_TRANSFER;
+
+ for(count = 0; count < max; count++ ) {
+ u32 val;
+ status = au_readl(HOST_STATUS(host));
+
+ if (!(status & SD_STATUS_NE))
+ break;
+
+ if (status & SD_STATUS_RC) {
+ DEBUG("RX CRC Error [%d + %d].\n", host->id,
+ host->pio.len, count);
+ break;
+ }
+
+ if (status & SD_STATUS_RO) {
+ DEBUG("RX Overrun [%d + %d]\n", host->id,
+ host->pio.len, count);
+ break;
+ }
+ else if (status & SD_STATUS_RU) {
+ DEBUG("RX Underrun [%d + %d]\n", host->id,
+ host->pio.len, count);
+ break;
+ }
+
+ val = au_readl(HOST_RXPORT(host));
+
+ if (sg_ptr)
+ *sg_ptr++ = (unsigned char) (val & 0xFF);
+ }
+
+ host->pio.len -= count;
+ host->pio.offset += count;
+
+ if (sg_len && count == sg_len) {
+ host->pio.index++;
+ host->pio.offset = 0;
+ }
+
+ if (host->pio.len == 0) {
+ //IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF);
+ IRQ_OFF(host, SD_CONFIG_NE);
+
+ if (host->flags & HOST_F_STOP)
+ SEND_STOP(host);
+
+ tasklet_schedule(&host->data_task);
+ }
+}
+
+/* static void au1xmmc_cmd_complete
+ This is called when a command has been completed - grab the response
+ and check for errors. Then start the data transfer if it is indicated.
+*/
+
+static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
+{
+
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_command *cmd;
+ int trans;
+
+ if (!host->mrq)
+ return;
+
+ cmd = mrq->cmd;
+ cmd->error = MMC_ERR_NONE;
+
+ if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT) {
+
+ /* Techincally, we should be getting all 48 bits of the response
+ * (SD_RESP1 + SD_RESP2), but because our response omits the CRC,
+ * our data ends up being shifted 8 bits to the right. In this case,
+ * that means that the OSR data starts at bit 31, so we can just
+ * read RESP0 and return that
+ */
+
+ cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
+ }
+ else if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_LONG) {
+ u32 r[4];
+ int i;
+
+ r[0] = au_readl(host->iobase + SD_RESP3);
+ r[1] = au_readl(host->iobase + SD_RESP2);
+ r[2] = au_readl(host->iobase + SD_RESP1);
+ r[3] = au_readl(host->iobase + SD_RESP0);
+
+ /* The CRC is omitted from the response, so really we only got
+ * 120 bytes, but the engine expects 128 bits, so we have to shift
+ * things up
+ */
+
+ for(i = 0; i < 4; i++) {
+ cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
+ if (i != 3) cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
+ }
+ }
+
+ /* Figure out errors */
+
+ if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
+ cmd->error = MMC_ERR_BADCRC;
+
+ trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
+
+ if (!trans || cmd->error != MMC_ERR_NONE) {
+
+ IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF);
+ tasklet_schedule(&host->finish_task);
+ return;
+ }
+
+ host->status = HOST_S_DATA;
+
+ if (host->flags & HOST_F_DMA) {
+ u32 channel = DMA_CHANNEL(host);
+
+ /* Start the DMA as soon as the buffer gets something in it */
+
+ if (host->flags & HOST_F_RECV) {
+ u32 mask = SD_STATUS_DB | SD_STATUS_NE;
+
+ while((status & mask) != mask)
+ status = au_readl(HOST_STATUS(host));
+ }
+
+ au1xxx_dbdma_start(channel);
+ }
+}
+
+static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
+{
+
+ unsigned int pbus = get_au1x00_speed();
+ unsigned int divisor;
+ u32 config;
+
+ /* From databook:
+ divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
+ */
+
+ pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
+ pbus /= 2;
+
+ divisor = ((pbus / rate) / 2) - 1;
+
+ config = au_readl(HOST_CONFIG(host));
+
+ config &= ~(SD_CONFIG_DIV);
+ config |= (divisor & SD_CONFIG_DIV) | SD_CONFIG_DE;
+
+ au_writel(config, HOST_CONFIG(host));
+ au_sync();
+}
+
+static int
+au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
+{
+
+ int datalen = data->blocks * (1 << data->blksz_bits);
+
+ if (dma != 0)
+ host->flags |= HOST_F_DMA;
+
+ if (data->flags & MMC_DATA_READ)
+ host->flags |= HOST_F_RECV;
+ else
+ host->flags |= HOST_F_XMIT;
+
+ if (host->mrq->stop)
+ host->flags |= HOST_F_STOP;
+
+ host->dma.dir = DMA_BIDIRECTIONAL;
+
+ host->dma.len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, host->dma.dir);
+
+ if (host->dma.len == 0)
+ return MMC_ERR_TIMEOUT;
+
+ au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+
+ if (host->flags & HOST_F_DMA) {
+ int i;
+ u32 channel = DMA_CHANNEL(host);
+
+ au1xxx_dbdma_stop(channel);
+
+ for(i = 0; i < host->dma.len; i++) {
+ u32 ret = 0, flags = DDMA_FLAGS_NOIE;
+ struct scatterlist *sg = &data->sg[i];
+ int sg_len = sg->length;
+
+ int len = (datalen > sg_len) ? sg_len : datalen;
+
+ if (i == host->dma.len - 1)
+ flags = DDMA_FLAGS_IE;
+
+ if (host->flags & HOST_F_XMIT){
+ ret = au1xxx_dbdma_put_source_flags(channel,
+ (void *) (page_address(sg->page) +
+ sg->offset),
+ len, flags);
+ }
+ else {
+ ret = au1xxx_dbdma_put_dest_flags(channel,
+ (void *) (page_address(sg->page) +
+ sg->offset),
+ len, flags);
+ }
+
+ if (!ret)
+ goto dataerr;
+
+ datalen -= len;
+ }
+ }
+ else {
+ host->pio.index = 0;
+ host->pio.offset = 0;
+ host->pio.len = datalen;
+
+ if (host->flags & HOST_F_XMIT)
+ IRQ_ON(host, SD_CONFIG_TH);
+ else
+ IRQ_ON(host, SD_CONFIG_NE);
+ //IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF);
+ }
+
+ return MMC_ERR_NONE;
+
+ dataerr:
+ dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir);
+ return MMC_ERR_TIMEOUT;
+}
+
+/* static void au1xmmc_request
+ This actually starts a command or data transaction
+*/
+
+static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
+{
+
+ struct au1xmmc_host *host = mmc_priv(mmc);
+ int ret = MMC_ERR_NONE;
+
+ WARN_ON(irqs_disabled());
+ WARN_ON(host->status != HOST_S_IDLE);
+
+ host->mrq = mrq;
+ host->status = HOST_S_CMD;
+
+ bcsr->disk_leds &= ~(1 << 8);
+
+ if (mrq->data) {
+ FLUSH_FIFO(host);
+ ret = au1xmmc_prepare_data(host, mrq->data);
+ }
+
+ if (ret == MMC_ERR_NONE)
+ ret = au1xmmc_send_command(host, 0, mrq->cmd);
+
+ if (ret != MMC_ERR_NONE) {
+ mrq->cmd->error = ret;
+ au1xmmc_finish_request(host);
+ }
+}
+
+static void au1xmmc_reset_controller(struct au1xmmc_host *host)
+{
+
+ /* Apply the clock */
+ au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
+ au_sync_delay(1);
+
+ au_writel(SD_ENABLE_R | SD_ENABLE_CE, HOST_ENABLE(host));
+ au_sync_delay(5);
+
+ au_writel(~0, HOST_STATUS(host));
+ au_sync();
+
+ au_writel(0, HOST_BLKSIZE(host));
+ au_writel(0x001fffff, HOST_TIMEOUT(host));
+ au_sync();
+
+ au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
+ au_sync();
+
+ au_writel(SD_CONFIG2_EN | SD_CONFIG2_FF, HOST_CONFIG2(host));
+ au_sync_delay(1);
+
+ au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
+ au_sync();
+
+ /* Configure interrupts */
+ au_writel(AU1XMMC_INTERRUPTS, HOST_CONFIG(host));
+ au_sync();
+}
+
+
+static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
+{
+ struct au1xmmc_host *host = mmc_priv(mmc);
+
+ DEBUG("set_ios (power=%u, clock=%uHz, vdd=%u, mode=%u)\n",
+ host->id, ios->power_mode, ios->clock, ios->vdd,
+ ios->bus_mode);
+
+ if (ios->power_mode == MMC_POWER_OFF)
+ au1xmmc_set_power(host, 0);
+ else if (ios->power_mode == MMC_POWER_ON) {
+ au1xmmc_set_power(host, 1);
+ }
+
+ if (ios->clock && ios->clock != host->clock) {
+ au1xmmc_set_clock(host, ios->clock);
+ host->clock = ios->clock;
+ }
+}
+
+static void au1xmmc_dma_callback(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
+ u32 status;
+
+ /* Avoid spurious interrupts */
+
+ if (!host->mrq)
+ return;
+
+ if (host->flags & HOST_F_STOP)
+ SEND_STOP(host);
+
+ tasklet_schedule(&host->data_task);
+}
+
+#define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT)
+#define STATUS_DATA_IN (SD_STATUS_NE)
+#define STATUS_DATA_OUT (SD_STATUS_TH)
+
+static irqreturn_t au1xmmc_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+
+ u32 status;
+ int i, ret = 0;
+
+ disable_irq(AU1100_SD_IRQ);
+
+ for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
+ struct au1xmmc_host * host = au1xmmc_hosts[i];
+ u32 handled = 1;
+
+ status = au_readl(HOST_STATUS(host));
+
+ if (host->mrq && (status & STATUS_TIMEOUT)) {
+ if (status & SD_STATUS_RAT)
+ host->mrq->cmd->error = MMC_ERR_TIMEOUT;
+
+ else if (status & SD_STATUS_DT)
+ host->mrq->data->error = MMC_ERR_TIMEOUT;
+
+ /* In PIO mode, interrupts might still be enabled */
+ IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
+
+ //IRQ_OFF(host, SD_CONFIG_TH|SD_CONFIG_RA|SD_CONFIG_RF);
+ tasklet_schedule(&host->finish_task);
+ }
+#if 0
+ else if (status & SD_STATUS_DD) {
+
+ /* Sometimes we get a DD before a NE in PIO mode */
+
+ if (!(host->flags & HOST_F_DMA) &&
+ (status & SD_STATUS_NE))
+ au1xmmc_receive_pio(host);
+ else {
+ au1xmmc_data_complete(host, status);
+ //tasklet_schedule(&host->data_task);
+ }
+ }
+#endif
+ else if (status & (SD_STATUS_CR)) {
+ if (host->status == HOST_S_CMD)
+ au1xmmc_cmd_complete(host,status);
+ }
+ else if (!(host->flags & HOST_F_DMA)) {
+ if ((host->flags & HOST_F_XMIT) &&
+ (status & STATUS_DATA_OUT))
+ au1xmmc_send_pio(host);
+ else if ((host->flags & HOST_F_RECV) &&
+ (status & STATUS_DATA_IN))
+ au1xmmc_receive_pio(host);
+ }
+ else if (status & 0x203FBC70) {
+ DEBUG("Unhandled status %8.8x\n", host->id, status);
+ handled = 0;
+ }
+
+ au_writel(status, HOST_STATUS(host));
+ au_sync();
+
+ ret |= handled;
+ }
+
+ enable_irq(AU1100_SD_IRQ);
+ return ret;
+}
+
+static void au1xmmc_poll_event(unsigned long arg)
+{
+ struct au1xmmc_host *host = (struct au1xmmc_host *) arg;
+
+ int card = au1xmmc_card_inserted(host);
+ int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0;
+
+ if (card != controller) {
+ host->flags &= ~HOST_F_ACTIVE;
+ if (card) host->flags |= HOST_F_ACTIVE;
+ mmc_detect_change(host->mmc, 0);
+ }
+
+ if (host->mrq != NULL) {
+ u32 status = au_readl(HOST_STATUS(host));
+ DEBUG("PENDING - %8.8x\n", host->id, status);
+ }
+
+ mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT);
+}
+
+static dbdev_tab_t au1xmmc_mem_dbdev =
+{
+ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 8, 0x00000000, 0, 0
+};
+
+static void au1xmmc_init_dma(struct au1xmmc_host *host)
+{
+
+ u32 rxchan, txchan;
+
+ int txid = au1xmmc_card_table[host->id].tx_devid;
+ int rxid = au1xmmc_card_table[host->id].rx_devid;
+
+ /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+ of 8 bits. And since devices are shared, we need to create
+ our own to avoid freaking out other devices
+ */
+
+ int memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+
+ txchan = au1xxx_dbdma_chan_alloc(memid, txid,
+ au1xmmc_dma_callback, (void *) host);
+
+ rxchan = au1xxx_dbdma_chan_alloc(rxid, memid,
+ au1xmmc_dma_callback, (void *) host);
+
+ au1xxx_dbdma_set_devwidth(txchan, 8);
+ au1xxx_dbdma_set_devwidth(rxchan, 8);
+
+ au1xxx_dbdma_ring_alloc(txchan, AU1XMMC_DESCRIPTOR_COUNT);
+ au1xxx_dbdma_ring_alloc(rxchan, AU1XMMC_DESCRIPTOR_COUNT);
+
+ host->tx_chan = txchan;
+ host->rx_chan = rxchan;
+}
+
+struct mmc_host_ops au1xmmc_ops = {
+ .request = au1xmmc_request,
+ .set_ios = au1xmmc_set_ios,
+};
+
+static int au1xmmc_probe(struct device *dev)
+{
+
+ int i, ret = 0;
+
+ /* THe interrupt is shared among all controllers */
+ ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, SA_INTERRUPT, "MMC", 0);
+
+ if (ret) {
+ printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n",
+ AU1100_SD_IRQ, ret);
+ return -ENXIO;
+ }
+
+ disable_irq(AU1100_SD_IRQ);
+
+ for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
+ struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), dev);
+ struct au1xmmc_host *host = 0;
+
+ if (!mmc) {
+ printk(DRIVER_NAME "ERROR: no mem for host %d\n", i);
+ au1xmmc_hosts[i] = 0;
+ continue;
+ }
+
+ mmc->ops = &au1xmmc_ops;
+
+ mmc->f_min = 450000;
+ mmc->f_max = 24000000;
+
+ mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
+ mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
+
+ mmc->ocr_avail = AU1XMMC_OCR;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ host->id = i;
+ host->iobase = au1xmmc_card_table[host->id].iobase;
+ host->clock = 0;
+ host->power_mode = MMC_POWER_OFF;
+
+ host->flags = au1xmmc_card_inserted(host) ? HOST_F_ACTIVE : 0;
+ host->status = HOST_S_IDLE;
+
+ init_timer(&host->timer);
+
+ host->timer.function = au1xmmc_poll_event;
+ host->timer.data = (unsigned long) host;
+ host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT;
+
+ tasklet_init(&host->data_task, au1xmmc_tasklet_data,
+ (unsigned long) host);
+
+ tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
+ (unsigned long) host);
+
+ spin_lock_init(&host->lock);
+
+ if (dma != 0)
+ au1xmmc_init_dma(host);
+
+ au1xmmc_reset_controller(host);
+
+ mmc_add_host(mmc);
+ au1xmmc_hosts[i] = host;
+
+ add_timer(&host->timer);
+
+ printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X (mode=%s)\n",
+ host->id, host->iobase, dma ? "dma" : "pio");
+ }
+
+ enable_irq(AU1100_SD_IRQ);
+
+ return 0;
+}
+
+static int au1xmmc_remove(struct device *dev)
+{
+
+ int i;
+
+ disable_irq(AU1100_SD_IRQ);
+
+ for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
+ struct au1xmmc_host *host = au1xmmc_hosts[i];
+ if (!host) continue;
+
+ tasklet_kill(&host->data_task);
+ tasklet_kill(&host->finish_task);
+
+ del_timer_sync(&host->timer);
+ au1xmmc_set_power(host, 0);
+
+ mmc_remove_host(host->mmc);
+
+ au1xxx_dbdma_chan_free(host->tx_chan);
+ au1xxx_dbdma_chan_free(host->rx_chan);
+
+ au_writel(0x0, HOST_ENABLE(host));
+ au_sync();
+ }
+
+ free_irq(AU1100_SD_IRQ, 0);
+ return 0;
+}
+
+static struct device_driver au1xmmc_driver = {
+ .name = DRIVER_NAME,
+ .bus = &platform_bus_type,
+ .probe = au1xmmc_probe,
+ .remove = au1xmmc_remove,
+ .suspend = NULL,
+ .resume = NULL
+};
+
+static int __init au1xmmc_init(void)
+{
+ return driver_register(&au1xmmc_driver);
+}
+
+static void __exit au1xmmc_exit(void)
+{
+ driver_unregister(&au1xmmc_driver);
+}
+
+module_init(au1xmmc_init);
+module_exit(au1xmmc_exit);
+
+#ifdef MODULE
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX");
+MODULE_LICENSE("GPL");
+#endif
+
diff --git a/drivers/mmc/au1xmmc.h b/drivers/mmc/au1xmmc.h
new file mode 100644
index 0000000..341cbdf
--- /dev/null
+++ b/drivers/mmc/au1xmmc.h
@@ -0,0 +1,96 @@
+#ifndef _AU1XMMC_H_
+#define _AU1XMMC_H_
+
+/* Hardware definitions */
+
+#define AU1XMMC_DESCRIPTOR_COUNT 1
+#define AU1XMMC_DESCRIPTOR_SIZE 2048
+
+#define AU1XMMC_OCR ( MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
+ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
+
+/* Easy access macros */
+
+#define HOST_STATUS(h) ((h)->iobase + SD_STATUS)
+#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG)
+#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE)
+#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT)
+#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT)
+#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG)
+#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE)
+#define HOST_CMD(h) ((h)->iobase + SD_CMD)
+#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2)
+#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT)
+#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG)
+
+#define DMA_CHANNEL(h) \
+ ( ((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
+
+/* This gives us a hard value for the stop command that we can write directly
+ * to the command register
+ */
+
+#define STOP_CMD (SD_CMD_RT_1B|SD_CMD_CT_7|(0xC << SD_CMD_CI_SHIFT)|SD_CMD_GO)
+
+/* This is the set of interrupts that we configure by default */
+
+#if 0
+#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_DD | \
+ SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
+#endif
+
+#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | \
+ SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
+/* The poll event (looking for insert/remove events runs twice a second */
+#define AU1XMMC_DETECT_TIMEOUT (HZ/2)
+
+struct au1xmmc_host {
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+
+ u32 id;
+
+ u32 flags;
+ u32 iobase;
+ u32 clock;
+ u32 bus_width;
+ u32 power_mode;
+
+ int status;
+
+ struct {
+ int len;
+ int dir;
+ } dma;
+
+ struct {
+ int index;
+ int offset;
+ int len;
+ } pio;
+
+ u32 tx_chan;
+ u32 rx_chan;
+
+ struct timer_list timer;
+ struct tasklet_struct finish_task;
+ struct tasklet_struct data_task;
+
+ spinlock_t lock;
+};
+
+/* Status flags used by the host structure */
+
+#define HOST_F_XMIT 0x0001
+#define HOST_F_RECV 0x0002
+#define HOST_F_DMA 0x0010
+#define HOST_F_ACTIVE 0x0100
+#define HOST_F_STOP 0x1000
+
+#define HOST_S_IDLE 0x0001
+#define HOST_S_CMD 0x0002
+#define HOST_S_DATA 0x0003
+#define HOST_S_STOP 0x0004
+
+#endif
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index fa83f15..9b62985 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -85,6 +85,12 @@
up(&open_lock);
}
+static inline int mmc_blk_readonly(struct mmc_card *card)
+{
+ return mmc_card_readonly(card) ||
+ !(card->csd.cmdclass & CCC_BLOCK_WRITE);
+}
+
static int mmc_blk_open(struct inode *inode, struct file *filp)
{
struct mmc_blk_data *md;
@@ -97,7 +103,7 @@
ret = 0;
if ((filp->f_mode & FMODE_WRITE) &&
- mmc_card_readonly(md->queue.card))
+ mmc_blk_readonly(md->queue.card))
ret = -EROFS;
}
@@ -410,7 +416,7 @@
printk(KERN_INFO "%s: %s %s %dKiB %s\n",
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
(card->csd.capacity << card->csd.read_blkbits) / 1024,
- mmc_card_readonly(card)?"(ro)":"");
+ mmc_blk_readonly(card)?"(ro)":"");
mmc_set_drvdata(card, md);
add_disk(md->disk);
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 91c7484..1e6bdba 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -24,6 +24,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/scatterlist.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
#include <asm/mach/mmc.h>
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index b53af57..d575e3a 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -29,7 +29,6 @@
#include <asm/dma.h>
#include <asm/io.h>
-#include <asm/irq.h>
#include <asm/scatterlist.h>
#include <asm/sizes.h>
@@ -571,23 +570,23 @@
}
#ifdef CONFIG_PM
-static int pxamci_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxamci_suspend(struct device *dev, pm_message_t state)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
- if (mmc && level == SUSPEND_DISABLE)
+ if (mmc)
ret = mmc_suspend_host(mmc, state);
return ret;
}
-static int pxamci_resume(struct device *dev, u32 level)
+static int pxamci_resume(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
- if (mmc && level == RESUME_ENABLE)
+ if (mmc)
ret = mmc_resume_host(mmc);
return ret;
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 3cbca7c..3ace875 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -1033,13 +1033,16 @@
}
else
{
- setup &= ~WBSD_DAT3_H;
+ if (setup & WBSD_DAT3_H)
+ {
+ setup &= ~WBSD_DAT3_H;
- /*
- * We cannot resume card detection immediatly
- * because of capacitance and delays in the chip.
- */
- mod_timer(&host->ignore_timer, jiffies + HZ/100);
+ /*
+ * We cannot resume card detection immediatly
+ * because of capacitance and delays in the chip.
+ */
+ mod_timer(&host->ignore_timer, jiffies + HZ/100);
+ }
}
wbsd_write_index(host, WBSD_IDX_SETUP, setup);
@@ -1461,8 +1464,10 @@
{
id = 0xFFFF;
- outb(unlock_codes[j], config_ports[i]);
- outb(unlock_codes[j], config_ports[i]);
+ host->config = config_ports[i];
+ host->unlock_code = unlock_codes[j];
+
+ wbsd_unlock_config(host);
outb(WBSD_CONF_ID_HI, config_ports[i]);
id = inb(config_ports[i] + 1) << 8;
@@ -1470,13 +1475,13 @@
outb(WBSD_CONF_ID_LO, config_ports[i]);
id |= inb(config_ports[i] + 1);
+ wbsd_lock_config(host);
+
for (k = 0;k < sizeof(valid_ids)/sizeof(int);k++)
{
if (id == valid_ids[k])
{
host->chip_id = id;
- host->config = config_ports[i];
- host->unlock_code = unlock_codes[i];
return 0;
}
@@ -1487,13 +1492,14 @@
DBG("Unknown hardware (id %x) found at %x\n",
id, config_ports[i]);
}
-
- outb(LOCK_CODE, config_ports[i]);
}
release_region(config_ports[i], 2);
}
+ host->config = 0;
+ host->unlock_code = 0;
+
return -ENODEV;
}
@@ -1699,8 +1705,10 @@
* Configure the resources the chip should use.
*/
-static void __devinit wbsd_chip_config(struct wbsd_host* host)
+static void wbsd_chip_config(struct wbsd_host* host)
{
+ wbsd_unlock_config(host);
+
/*
* Reset the chip.
*/
@@ -1733,16 +1741,20 @@
*/
wbsd_write_config(host, WBSD_CONF_ENABLE, 1);
wbsd_write_config(host, WBSD_CONF_POWER, 0x20);
+
+ wbsd_lock_config(host);
}
/*
* Check that configured resources are correct.
*/
-static int __devinit wbsd_chip_validate(struct wbsd_host* host)
+static int wbsd_chip_validate(struct wbsd_host* host)
{
int base, irq, dma;
+ wbsd_unlock_config(host);
+
/*
* Select SD/MMC function.
*/
@@ -1758,6 +1770,8 @@
dma = wbsd_read_config(host, WBSD_CONF_DRQ);
+ wbsd_lock_config(host);
+
/*
* Validate against given configuration.
*/
@@ -1771,6 +1785,20 @@
return 1;
}
+/*
+ * Powers down the SD function
+ */
+
+static void wbsd_chip_poweroff(struct wbsd_host* host)
+{
+ wbsd_unlock_config(host);
+
+ wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
+ wbsd_write_config(host, WBSD_CONF_ENABLE, 0);
+
+ wbsd_lock_config(host);
+}
+
/*****************************************************************************\
* *
* Devices setup and shutdown *
@@ -1844,7 +1872,11 @@
*/
#ifdef CONFIG_PM
if (host->config)
+ {
+ wbsd_unlock_config(host);
wbsd_write_config(host, WBSD_CONF_PME, 0xA0);
+ wbsd_lock_config(host);
+ }
#endif
/*
* Allow device to initialise itself properly.
@@ -1885,16 +1917,11 @@
mmc_remove_host(mmc);
+ /*
+ * Power down the SD/MMC function.
+ */
if (!pnp)
- {
- /*
- * Power down the SD/MMC function.
- */
- wbsd_unlock_config(host);
- wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD);
- wbsd_write_config(host, WBSD_CONF_ENABLE, 0);
- wbsd_lock_config(host);
- }
+ wbsd_chip_poweroff(host);
wbsd_release_resources(host);
@@ -1955,23 +1982,59 @@
*/
#ifdef CONFIG_PM
-static int wbsd_suspend(struct device *dev, pm_message_t state, u32 level)
+
+static int wbsd_suspend(struct device *dev, pm_message_t state)
{
- DBGF("Not yet supported\n");
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct wbsd_host *host;
+ int ret;
+
+ if (!mmc)
+ return 0;
+
+ DBG("Suspending...\n");
+
+ ret = mmc_suspend_host(mmc, state);
+ if (!ret)
+ return ret;
+
+ host = mmc_priv(mmc);
+
+ wbsd_chip_poweroff(host);
return 0;
}
-static int wbsd_resume(struct device *dev, u32 level)
+static int wbsd_resume(struct device *dev)
{
- DBGF("Not yet supported\n");
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct wbsd_host *host;
- return 0;
+ if (!mmc)
+ return 0;
+
+ DBG("Resuming...\n");
+
+ host = mmc_priv(mmc);
+
+ wbsd_chip_config(host);
+
+ /*
+ * Allow device to initialise itself properly.
+ */
+ mdelay(5);
+
+ wbsd_init_device(host);
+
+ return mmc_resume_host(mmc);
}
-#else
+
+#else /* CONFIG_PM */
+
#define wbsd_suspend NULL
#define wbsd_resume NULL
-#endif
+
+#endif /* CONFIG_PM */
static struct platform_device *wbsd_device;
diff --git a/drivers/mtd/chips/jedec.c b/drivers/mtd/chips/jedec.c
index 62d235a..4f6778f3 100644
--- a/drivers/mtd/chips/jedec.c
+++ b/drivers/mtd/chips/jedec.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/mtd/jedec.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index dfd335e..df987a5 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -44,6 +44,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/string.h>
#include <linux/mtd/mtd.h>
#ifdef HAVE_PARTITIONS
#include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index a423a38..765c017 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -22,6 +22,7 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#define ERROR(fmt, args...) printk(KERN_ERR "phram: " fmt , ## args)
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
index 0ba0ff7..63104c7 100644
--- a/drivers/mtd/maps/bast-flash.c
+++ b/drivers/mtd/maps/bast-flash.c
@@ -33,6 +33,7 @@
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index da8584a..c68b31d 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -20,6 +20,7 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index 938c41f..e5b7416 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index 0bc79c9..f995196 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -30,12 +30,15 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/string.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
+#include <asm/io.h>
+
/*
** The DIL/NetPC keeps its BIOS in two distinct flash blocks.
** Destroying any of these blocks transforms the DNPC into
diff --git a/drivers/mtd/maps/epxa10db-flash.c b/drivers/mtd/maps/epxa10db-flash.c
index ab6dbe2..1df6188 100644
--- a/drivers/mtd/maps/epxa10db-flash.c
+++ b/drivers/mtd/maps/epxa10db-flash.c
@@ -27,12 +27,15 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/slab.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
+#include <asm/io.h>
#include <asm/hardware.h>
+
#ifdef CONFIG_EPXA10DB
#define BOARD_NAME "EPXA10DB"
#else
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
index 068bb6a..00f7bbe 100644
--- a/drivers/mtd/maps/fortunet.c
+++ b/drivers/mtd/maps/fortunet.c
@@ -7,11 +7,14 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/string.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+
#define MAX_NUM_REGIONS 4
#define MAX_NUM_PARTITIONS 8
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index a9f86c7..1e5d6e1 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -22,11 +22,13 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
#include <asm/io.h>
#include <asm/hardware.h>
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 3fcc328..da316e5 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -20,11 +20,14 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
+
#include <asm/io.h>
#include <asm/mach/flash.h>
diff --git a/drivers/mtd/maps/lubbock-flash.c b/drivers/mtd/maps/lubbock-flash.c
index 1298de4..2337e0c 100644
--- a/drivers/mtd/maps/lubbock-flash.c
+++ b/drivers/mtd/maps/lubbock-flash.c
@@ -15,10 +15,13 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
+
#include <linux/dma-mapping.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
+
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
diff --git a/drivers/mtd/maps/mainstone-flash.c b/drivers/mtd/maps/mainstone-flash.c
index 87e93fa..da0f8a6 100644
--- a/drivers/mtd/maps/mainstone-flash.c
+++ b/drivers/mtd/maps/mainstone-flash.c
@@ -16,9 +16,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
+
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
index 4961090..da36e8d 100644
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ b/drivers/mtd/maps/omap-toto-flash.c
@@ -12,9 +12,9 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index b17bca6..fa84566 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -36,6 +36,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 18dbd3a..d9c64e9 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 118b045..a0577ea 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -30,6 +30,7 @@
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 8dcaa35..c81bec7 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -21,6 +21,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>
@@ -129,20 +130,21 @@
char name[16];
struct map_info map;
struct mtd_info *mtd;
- struct flash_platform_data *data;
+ struct flash_platform_data *plat;
};
struct sa_info {
struct mtd_partition *parts;
struct mtd_info *mtd;
int num_subdev;
+ unsigned int nr_parts;
struct sa_subdev_info subdev[0];
};
static void sa1100_set_vpp(struct map_info *map, int on)
{
struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map);
- subdev->data->set_vpp(on);
+ subdev->plat->set_vpp(on);
}
static void sa1100_destroy_subdev(struct sa_subdev_info *subdev)
@@ -186,7 +188,7 @@
goto out;
}
- if (subdev->data->set_vpp)
+ if (subdev->plat->set_vpp)
subdev->map.set_vpp = sa1100_set_vpp;
subdev->map.phys = phys;
@@ -203,7 +205,7 @@
* Now let's probe for the actual flash. Do it here since
* specific machine settings might have been set above.
*/
- subdev->mtd = do_map_probe(subdev->data->map_name, &subdev->map);
+ subdev->mtd = do_map_probe(subdev->plat->map_name, &subdev->map);
if (subdev->mtd == NULL) {
ret = -ENXIO;
goto err;
@@ -222,13 +224,17 @@
return ret;
}
-static void sa1100_destroy(struct sa_info *info)
+static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *plat)
{
int i;
if (info->mtd) {
- del_mtd_partitions(info->mtd);
-
+ if (info->nr_parts == 0)
+ del_mtd_device(info->mtd);
+#ifdef CONFIG_MTD_PARTITIONS
+ else
+ del_mtd_partitions(info->mtd);
+#endif
#ifdef CONFIG_MTD_CONCAT
if (info->mtd != info->subdev[0].mtd)
mtd_concat_destroy(info->mtd);
@@ -241,10 +247,13 @@
for (i = info->num_subdev - 1; i >= 0; i--)
sa1100_destroy_subdev(&info->subdev[i]);
kfree(info);
+
+ if (plat->exit)
+ plat->exit();
}
static struct sa_info *__init
-sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash)
+sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
{
struct sa_info *info;
int nr, size, i, ret = 0;
@@ -274,6 +283,12 @@
memset(info, 0, size);
+ if (plat->init) {
+ ret = plat->init();
+ if (ret)
+ goto err;
+ }
+
/*
* Claim and then map the memory regions.
*/
@@ -286,8 +301,8 @@
break;
subdev->map.name = subdev->name;
- sprintf(subdev->name, "sa1100-%d", i);
- subdev->data = flash;
+ sprintf(subdev->name, "%s-%d", plat->name, i);
+ subdev->plat = plat;
ret = sa1100_probe_subdev(subdev, res);
if (ret)
@@ -308,7 +323,7 @@
* otherwise fail. Either way, it'll be called "sa1100".
*/
if (info->num_subdev == 1) {
- strcpy(info->subdev[0].name, "sa1100");
+ strcpy(info->subdev[0].name, plat->name);
info->mtd = info->subdev[0].mtd;
ret = 0;
} else if (info->num_subdev > 1) {
@@ -321,7 +336,7 @@
cdev[i] = info->subdev[i].mtd;
info->mtd = mtd_concat_create(cdev, info->num_subdev,
- "sa1100");
+ plat->name);
if (info->mtd == NULL)
ret = -ENXIO;
#else
@@ -335,7 +350,7 @@
return info;
err:
- sa1100_destroy(info);
+ sa1100_destroy(info, plat);
out:
return ERR_PTR(ret);
}
@@ -345,16 +360,16 @@
static int __init sa1100_mtd_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- struct flash_platform_data *flash = pdev->dev.platform_data;
+ struct flash_platform_data *plat = pdev->dev.platform_data;
struct mtd_partition *parts;
const char *part_type = NULL;
struct sa_info *info;
int err, nr_parts = 0;
- if (!flash)
+ if (!plat)
return -ENODEV;
- info = sa1100_setup_mtd(pdev, flash);
+ info = sa1100_setup_mtd(pdev, plat);
if (IS_ERR(info)) {
err = PTR_ERR(info);
goto out;
@@ -371,8 +386,8 @@
} else
#endif
{
- parts = flash->parts;
- nr_parts = flash->nr_parts;
+ parts = plat->parts;
+ nr_parts = plat->nr_parts;
part_type = "static";
}
@@ -386,6 +401,8 @@
add_mtd_partitions(info->mtd, parts, nr_parts);
}
+ info->nr_parts = nr_parts;
+
dev_set_drvdata(dev, info);
err = 0;
@@ -396,33 +413,44 @@
static int __exit sa1100_mtd_remove(struct device *dev)
{
struct sa_info *info = dev_get_drvdata(dev);
+ struct flash_platform_data *plat = dev->platform_data;
+
dev_set_drvdata(dev, NULL);
- sa1100_destroy(info);
+ sa1100_destroy(info, plat);
+
return 0;
}
#ifdef CONFIG_PM
-static int sa1100_mtd_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1100_mtd_suspend(struct device *dev, pm_message_t state)
{
struct sa_info *info = dev_get_drvdata(dev);
int ret = 0;
- if (info && level == SUSPEND_SAVE_STATE)
+ if (info)
ret = info->mtd->suspend(info->mtd);
return ret;
}
-static int sa1100_mtd_resume(struct device *dev, u32 level)
+static int sa1100_mtd_resume(struct device *dev)
{
struct sa_info *info = dev_get_drvdata(dev);
- if (info && level == RESUME_RESTORE_STATE)
+ if (info)
info->mtd->resume(info->mtd);
return 0;
}
+
+static void sa1100_mtd_shutdown(struct device *dev)
+{
+ struct sa_info *info = dev_get_drvdata(dev);
+ if (info && info->mtd->suspend(info->mtd) == 0)
+ info->mtd->resume(info->mtd);
+}
#else
#define sa1100_mtd_suspend NULL
#define sa1100_mtd_resume NULL
+#define sa1100_mtd_shutdown NULL
#endif
static struct device_driver sa1100_mtd_driver = {
@@ -432,6 +460,7 @@
.remove = __exit_p(sa1100_mtd_remove),
.suspend = sa1100_mtd_suspend,
.resume = sa1100_mtd_resume,
+ .shutdown = sa1100_mtd_shutdown,
};
static int __init sa1100_mtd_init(void)
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index 995e999..4e28b97 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -27,12 +27,14 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+
#define FLASH_ADDR 0x40000000
#define FLASH_SIZE 0x00800000
#define FLASH_BANK_MAX 4
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index b7c32c2..400dd9c 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/sched.h> /* TASK_* */
#include <linux/mtd/mtd.h>
#include <linux/mtd/blktrans.h>
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 1ed602a..16df1e4 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/fs.h>
+#include <linux/sched.h> /* TASK_* */
#include <asm/uaccess.h>
#include <linux/device.h>
@@ -24,10 +25,10 @@
if (!mtd)
return;
- class_device_create(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
+ class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
NULL, "mtd%d", mtd->index);
- class_device_create(mtd_class,
+ class_device_create(mtd_class, NULL,
MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
NULL, "mtd%dro", mtd->index);
}
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 8f66d09..f3e65af 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -14,7 +14,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/slab.h>
-
+#include <linux/sched.h> /* TASK_* */
#include <linux/mtd/mtd.h>
#include <linux/mtd/concat.h>
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index b47ebcb..b58ba23 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -51,6 +51,7 @@
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index bc53744..f822cd3 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1027,8 +1027,7 @@
if (!(cpr8(Cmd) & CmdReset))
return;
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout_uninterruptible(10);
}
printk(KERN_ERR "%s: hardware reset timeout\n", cp->dev->name);
@@ -1575,6 +1574,7 @@
.set_wol = cp_set_wol,
.get_strings = cp_get_strings,
.get_ethtool_stats = cp_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
@@ -1773,6 +1773,7 @@
for (i = 0; i < 3; i++)
((u16 *) (dev->dev_addr))[i] =
le16_to_cpu (read_eeprom (regs, i + 7, addr_len));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
dev->open = cp_open;
dev->stop = cp_close;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 4c2cf7b..30bee11 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -552,7 +552,8 @@
{ "RTL-8100B/8139D",
HW_REVID(1, 1, 1, 0, 1, 0, 1),
- HasLWake,
+ HasHltClk /* XXX undocumented? */
+ | HasLWake,
},
{ "RTL-8101",
@@ -970,6 +971,7 @@
for (i = 0; i < 3; i++)
((u16 *) (dev->dev_addr))[i] =
le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
/* The Rtl8139-specific entries in the device structure. */
dev->open = rtl8139_open;
@@ -2465,6 +2467,7 @@
.get_strings = rtl8139_get_strings,
.get_stats_count = rtl8139_get_stats_count,
.get_ethtool_stats = rtl8139_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c748b0e..6d4f9ce 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -475,6 +475,14 @@
the moment only acceleration of IPv4 is supported. This option
enables offloading for checksums on transmit. If unsure, say Y.
+config MIPS_SIM_NET
+ tristate "MIPS simulator Network device (EXPERIMENTAL)"
+ depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL
+ help
+ The MIPSNET device is a simple Ethernet network device which is
+ emulated by the MIPS Simulator.
+ If you are not using a MIPSsim or are unsure, say N.
+
config SGI_O2MACE_ETH
tristate "SGI O2 MACE Fast Ethernet support"
depends on NET_ETHERNET && SGI_IP32=y
@@ -1155,38 +1163,74 @@
be called ibmveth.
config IBM_EMAC
- bool "IBM PPC4xx EMAC driver support"
+ tristate "PowerPC 4xx on-chip Ethernet support"
depends on 4xx
- select CRC32
- ---help---
- This driver supports the IBM PPC4xx EMAC family of on-chip
- Ethernet controllers.
-
-config IBM_EMAC_ERRMSG
- bool "Verbose error messages"
- depends on IBM_EMAC && BROKEN
+ help
+ This driver supports the PowerPC 4xx EMAC family of on-chip
+ Ethernet controllers.
config IBM_EMAC_RXB
int "Number of receive buffers"
depends on IBM_EMAC
- default "128" if IBM_EMAC4
- default "64"
+ default "128"
config IBM_EMAC_TXB
int "Number of transmit buffers"
depends on IBM_EMAC
- default "128" if IBM_EMAC4
- default "8"
+ default "64"
-config IBM_EMAC_FGAP
- int "Frame gap"
+config IBM_EMAC_POLL_WEIGHT
+ int "MAL NAPI polling weight"
depends on IBM_EMAC
- default "8"
+ default "32"
-config IBM_EMAC_SKBRES
- int "Skb reserve amount"
+config IBM_EMAC_RX_COPY_THRESHOLD
+ int "RX skb copy threshold (bytes)"
+ depends on IBM_EMAC
+ default "256"
+
+config IBM_EMAC_RX_SKB_HEADROOM
+ int "Additional RX skb headroom (bytes)"
depends on IBM_EMAC
default "0"
+ help
+ Additional receive skb headroom. Note, that driver
+ will always reserve at least 2 bytes to make IP header
+ aligned, so usualy there is no need to add any additional
+ headroom.
+
+ If unsure, set to 0.
+
+config IBM_EMAC_PHY_RX_CLK_FIX
+ bool "PHY Rx clock workaround"
+ depends on IBM_EMAC && (405EP || 440GX || 440EP)
+ help
+ Enable this if EMAC attached to a PHY which doesn't generate
+ RX clock if there is no link, if this is the case, you will
+ see "TX disable timeout" or "RX disable timeout" in the system
+ log.
+
+ If unsure, say N.
+
+config IBM_EMAC_DEBUG
+ bool "Debugging"
+ depends on IBM_EMAC
+ default n
+
+config IBM_EMAC_ZMII
+ bool
+ depends on IBM_EMAC && (NP405H || NP405L || 44x)
+ default y
+
+config IBM_EMAC_RGMII
+ bool
+ depends on IBM_EMAC && 440GX
+ default y
+
+config IBM_EMAC_TAH
+ bool
+ depends on IBM_EMAC && 440GX
+ default y
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
@@ -1330,7 +1374,7 @@
config CS89x0
tristate "CS89x0 support"
- depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105
+ depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -1767,6 +1811,7 @@
controller on the Renesas H8/300 processor.
source "drivers/net/fec_8xx/Kconfig"
+source "drivers/net/fs_enet/Kconfig"
endmenu
@@ -2083,6 +2128,7 @@
config GIANFAR
tristate "Gianfar Ethernet"
depends on 85xx || 83xx
+ select PHYLIB
help
This driver supports the Gigabit TSEC on the MPC85xx
family of chips, and the FEC on the 8540
@@ -2192,8 +2238,8 @@
depends on PCI
---help---
This driver supports the 10Gbe XFrame NIC of S2IO.
- For help regarding driver compilation, installation and
- tuning please look into ~/drivers/net/s2io/README.txt.
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/s2io.txt>.
config S2IO_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
@@ -2243,6 +2289,20 @@
tristate "iSeries Virtual Ethernet driver support"
depends on PPC_ISERIES
+config RIONET
+ tristate "RapidIO Ethernet over messaging driver support"
+ depends on NETDEVICES && RAPIDIO
+
+config RIONET_TX_SIZE
+ int "Number of outbound queue entries"
+ depends on RIONET
+ default "128"
+
+config RIONET_RX_SIZE
+ int "Number of inbound queue entries"
+ depends on RIONET
+ default "128"
+
config FDDI
bool "FDDI driver support"
depends on (PCI || EISA)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 8aeec9f..7c313cb 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,7 +13,7 @@
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
-gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_phy.o
+gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_mii.o
#
# link order important here
@@ -64,6 +64,7 @@
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
+obj-$(CONFIG_RIONET) += rionet.o
#
# end link order section
@@ -166,6 +167,7 @@
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_GT96100ETH) += gt96100eth.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
+obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
@@ -201,3 +203,6 @@
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
+
+obj-$(CONFIG_FS_ENET) += fs_enet/
+
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index dbecc6b..b8953de 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -871,10 +871,8 @@
if (ap->info)
pci_free_consistent(ap->pdev, sizeof(struct ace_info),
ap->info, ap->info_dma);
- if (ap->skb)
- kfree(ap->skb);
- if (ap->trace_buf)
- kfree(ap->trace_buf);
+ kfree(ap->skb);
+ kfree(ap->trace_buf);
if (dev->irq)
free_irq(dev->irq, dev);
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
old mode 100755
new mode 100644
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
old mode 100755
new mode 100644
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index c56d86d..3d50e95 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -29,6 +29,7 @@
#include <asm/system.h>
#include <asm/irq.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#define TX_BUFFERS 15
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index c82b9cd..332e995 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -151,13 +151,6 @@
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
SUPPORTED_Autoneg
-static char *phy_link[] =
-{ "unknown",
- "10Base2", "10BaseT",
- "AUI",
- "100BaseT", "100BaseTX", "100BaseFX"
-};
-
int bcm_5201_init(struct net_device *dev, int phy_addr)
{
s16 data;
@@ -785,6 +778,7 @@
{"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0},
{"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0},
{"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1},
+ {"NS DP83847 PHY", 0x2000, 0x5c30, &bcm_5201_ops ,0},
{"AMD 79C901 HomePNA PHY",0x0000,0x35c8, &am79c901_ops,0},
{"AMD 79C874 10/100 BaseT PHY",0x0022,0x561b, &am79c874_ops,0},
{"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
@@ -1045,7 +1039,7 @@
#endif
if (aup->mii->chip_info == NULL) {
- printk(KERN_ERR "%s: Au1x No MII transceivers found!\n",
+ printk(KERN_ERR "%s: Au1x No known MII transceivers found!\n",
dev->name);
return -1;
}
@@ -1546,6 +1540,9 @@
printk(KERN_ERR "%s: out of memory\n", dev->name);
goto err_out;
}
+ aup->mii->next = NULL;
+ aup->mii->chip_info = NULL;
+ aup->mii->status = 0;
aup->mii->mii_control_reg = 0;
aup->mii->mii_data_reg = 0;
@@ -1609,8 +1606,7 @@
/* here we should have a valid dev plus aup-> register addresses
* so we can reset the mac properly.*/
reset_mac(dev);
- if (aup->mii)
- kfree(aup->mii);
+ kfree(aup->mii);
for (i = 0; i < NUM_RX_DMA; i++) {
if (aup->rx_db_inuse[i])
ReleaseDB(aup, aup->rx_db_inuse[i]);
@@ -1809,8 +1805,7 @@
if (dev) {
aup = (struct au1000_private *) dev->priv;
unregister_netdev(dev);
- if (aup->mii)
- kfree(aup->mii);
+ kfree(aup->mii);
for (j = 0; j < NUM_RX_DMA; j++) {
if (aup->rx_db_inuse[j])
ReleaseDB(aup, aup->rx_db_inuse[j]);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 94939f5..0ee3e27 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/version.h>
+#include <linux/dma-mapping.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -106,6 +107,29 @@
static void b44_poll_controller(struct net_device *dev);
#endif
+static int dma_desc_align_mask;
+static int dma_desc_sync_size;
+
+static inline void b44_sync_dma_desc_for_device(struct pci_dev *pdev,
+ dma_addr_t dma_base,
+ unsigned long offset,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_range_for_device(&pdev->dev, dma_base,
+ offset & dma_desc_align_mask,
+ dma_desc_sync_size, dir);
+}
+
+static inline void b44_sync_dma_desc_for_cpu(struct pci_dev *pdev,
+ dma_addr_t dma_base,
+ unsigned long offset,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_range_for_cpu(&pdev->dev, dma_base,
+ offset & dma_desc_align_mask,
+ dma_desc_sync_size, dir);
+}
+
static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
{
return readl(bp->regs + reg);
@@ -668,6 +692,11 @@
dp->ctrl = cpu_to_le32(ctrl);
dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
+ if (bp->flags & B44_FLAG_RX_RING_HACK)
+ b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
+ dest_idx * sizeof(dp),
+ DMA_BIDIRECTIONAL);
+
return RX_PKT_BUF_SZ;
}
@@ -692,6 +721,11 @@
pci_unmap_addr_set(dest_map, mapping,
pci_unmap_addr(src_map, mapping));
+ if (bp->flags & B44_FLAG_RX_RING_HACK)
+ b44_sync_dma_desc_for_cpu(bp->pdev, bp->rx_ring_dma,
+ src_idx * sizeof(src_desc),
+ DMA_BIDIRECTIONAL);
+
ctrl = src_desc->ctrl;
if (dest_idx == (B44_RX_RING_SIZE - 1))
ctrl |= cpu_to_le32(DESC_CTRL_EOT);
@@ -700,8 +734,14 @@
dest_desc->ctrl = ctrl;
dest_desc->addr = src_desc->addr;
+
src_map->skb = NULL;
+ if (bp->flags & B44_FLAG_RX_RING_HACK)
+ b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
+ dest_idx * sizeof(dest_desc),
+ DMA_BIDIRECTIONAL);
+
pci_dma_sync_single_for_device(bp->pdev, src_desc->addr,
RX_PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
@@ -959,6 +999,11 @@
bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl);
bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset);
+ if (bp->flags & B44_FLAG_TX_RING_HACK)
+ b44_sync_dma_desc_for_device(bp->pdev, bp->tx_ring_dma,
+ entry * sizeof(bp->tx_ring[0]),
+ DMA_TO_DEVICE);
+
entry = NEXT_TX(entry);
bp->tx_prod = entry;
@@ -1064,6 +1109,16 @@
memset(bp->rx_ring, 0, B44_RX_RING_BYTES);
memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
+ if (bp->flags & B44_FLAG_RX_RING_HACK)
+ dma_sync_single_for_device(&bp->pdev->dev, bp->rx_ring_dma,
+ DMA_TABLE_BYTES,
+ PCI_DMA_BIDIRECTIONAL);
+
+ if (bp->flags & B44_FLAG_TX_RING_HACK)
+ dma_sync_single_for_device(&bp->pdev->dev, bp->tx_ring_dma,
+ DMA_TABLE_BYTES,
+ PCI_DMA_TODEVICE);
+
for (i = 0; i < bp->rx_pending; i++) {
if (b44_alloc_rx_skb(bp, -1, i) < 0)
break;
@@ -1076,23 +1131,33 @@
*/
static void b44_free_consistent(struct b44 *bp)
{
- if (bp->rx_buffers) {
- kfree(bp->rx_buffers);
- bp->rx_buffers = NULL;
- }
- if (bp->tx_buffers) {
- kfree(bp->tx_buffers);
- bp->tx_buffers = NULL;
- }
+ kfree(bp->rx_buffers);
+ bp->rx_buffers = NULL;
+ kfree(bp->tx_buffers);
+ bp->tx_buffers = NULL;
if (bp->rx_ring) {
- pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
- bp->rx_ring, bp->rx_ring_dma);
+ if (bp->flags & B44_FLAG_RX_RING_HACK) {
+ dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma,
+ DMA_TABLE_BYTES,
+ DMA_BIDIRECTIONAL);
+ kfree(bp->rx_ring);
+ } else
+ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
+ bp->rx_ring, bp->rx_ring_dma);
bp->rx_ring = NULL;
+ bp->flags &= ~B44_FLAG_RX_RING_HACK;
}
if (bp->tx_ring) {
- pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
- bp->tx_ring, bp->tx_ring_dma);
+ if (bp->flags & B44_FLAG_TX_RING_HACK) {
+ dma_unmap_single(&bp->pdev->dev, bp->tx_ring_dma,
+ DMA_TABLE_BYTES,
+ DMA_TO_DEVICE);
+ kfree(bp->tx_ring);
+ } else
+ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
+ bp->tx_ring, bp->tx_ring_dma);
bp->tx_ring = NULL;
+ bp->flags &= ~B44_FLAG_TX_RING_HACK;
}
}
@@ -1118,12 +1183,56 @@
size = DMA_TABLE_BYTES;
bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma);
- if (!bp->rx_ring)
- goto out_err;
+ if (!bp->rx_ring) {
+ /* Allocation may have failed due to pci_alloc_consistent
+ insisting on use of GFP_DMA, which is more restrictive
+ than necessary... */
+ struct dma_desc *rx_ring;
+ dma_addr_t rx_ring_dma;
+
+ if (!(rx_ring = (struct dma_desc *)kmalloc(size, GFP_KERNEL)))
+ goto out_err;
+
+ memset(rx_ring, 0, size);
+ rx_ring_dma = dma_map_single(&bp->pdev->dev, rx_ring,
+ DMA_TABLE_BYTES,
+ DMA_BIDIRECTIONAL);
+
+ if (rx_ring_dma + size > B44_DMA_MASK) {
+ kfree(rx_ring);
+ goto out_err;
+ }
+
+ bp->rx_ring = rx_ring;
+ bp->rx_ring_dma = rx_ring_dma;
+ bp->flags |= B44_FLAG_RX_RING_HACK;
+ }
bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma);
- if (!bp->tx_ring)
- goto out_err;
+ if (!bp->tx_ring) {
+ /* Allocation may have failed due to pci_alloc_consistent
+ insisting on use of GFP_DMA, which is more restrictive
+ than necessary... */
+ struct dma_desc *tx_ring;
+ dma_addr_t tx_ring_dma;
+
+ if (!(tx_ring = (struct dma_desc *)kmalloc(size, GFP_KERNEL)))
+ goto out_err;
+
+ memset(tx_ring, 0, size);
+ tx_ring_dma = dma_map_single(&bp->pdev->dev, tx_ring,
+ DMA_TABLE_BYTES,
+ DMA_TO_DEVICE);
+
+ if (tx_ring_dma + size > B44_DMA_MASK) {
+ kfree(tx_ring);
+ goto out_err;
+ }
+
+ bp->tx_ring = tx_ring;
+ bp->tx_ring_dma = tx_ring_dma;
+ bp->flags |= B44_FLAG_TX_RING_HACK;
+ }
return 0;
@@ -1507,14 +1616,14 @@
cmd->advertising = 0;
if (bp->flags & B44_FLAG_ADV_10HALF)
- cmd->advertising |= ADVERTISE_10HALF;
+ cmd->advertising |= ADVERTISED_10baseT_Half;
if (bp->flags & B44_FLAG_ADV_10FULL)
- cmd->advertising |= ADVERTISE_10FULL;
+ cmd->advertising |= ADVERTISED_10baseT_Full;
if (bp->flags & B44_FLAG_ADV_100HALF)
- cmd->advertising |= ADVERTISE_100HALF;
+ cmd->advertising |= ADVERTISED_100baseT_Half;
if (bp->flags & B44_FLAG_ADV_100FULL)
- cmd->advertising |= ADVERTISE_100FULL;
- cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ cmd->advertising |= ADVERTISED_100baseT_Full;
+ cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
SPEED_100 : SPEED_10;
cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
@@ -1676,6 +1785,7 @@
.set_pauseparam = b44_set_pauseparam,
.get_msglevel = b44_get_msglevel,
.set_msglevel = b44_set_msglevel,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
@@ -1718,6 +1828,7 @@
bp->dev->dev_addr[3] = eeprom[80];
bp->dev->dev_addr[4] = eeprom[83];
bp->dev->dev_addr[5] = eeprom[82];
+ memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len);
bp->phy_addr = eeprom[90] & 0x1f;
@@ -1930,6 +2041,8 @@
b44_free_rings(bp);
spin_unlock_irq(&bp->lock);
+
+ free_irq(dev->irq, dev);
pci_disable_device(pdev);
return 0;
}
@@ -1946,6 +2059,9 @@
if (!netif_running(dev))
return 0;
+ if (request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev))
+ printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
+
spin_lock_irq(&bp->lock);
b44_init_rings(bp);
@@ -1971,6 +2087,12 @@
static int __init b44_init(void)
{
+ unsigned int dma_desc_align_size = dma_get_cache_alignment();
+
+ /* Setup paramaters for syncing RX/TX DMA descriptors */
+ dma_desc_align_mask = ~(dma_desc_align_size - 1);
+ dma_desc_sync_size = max(dma_desc_align_size, sizeof(struct dma_desc));
+
return pci_module_init(&b44_driver);
}
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index 11c40a2..593cb0a 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -400,6 +400,8 @@
#define B44_FLAG_ADV_100HALF 0x04000000
#define B44_FLAG_ADV_100FULL 0x08000000
#define B44_FLAG_INTERNAL_PHY 0x10000000
+#define B44_FLAG_RX_RING_HACK 0x20000000
+#define B44_FLAG_TX_RING_HACK 0x40000000
u32 rx_offset;
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 0ee2889..bbca8ae 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1690,10 +1690,8 @@
{
macio_unregister_driver(&bmac_driver);
- if (bmac_emergency_rxbuf != NULL) {
- kfree(bmac_emergency_rxbuf);
- bmac_emergency_rxbuf = NULL;
- }
+ kfree(bmac_emergency_rxbuf);
+ bmac_emergency_rxbuf = NULL;
}
MODULE_AUTHOR("Randy Gobbel/Paul Mackerras");
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 3a2ace0..11d2523 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -314,20 +314,16 @@
bp->tx_desc_ring, bp->tx_desc_mapping);
bp->tx_desc_ring = NULL;
}
- if (bp->tx_buf_ring) {
- kfree(bp->tx_buf_ring);
- bp->tx_buf_ring = NULL;
- }
+ kfree(bp->tx_buf_ring);
+ bp->tx_buf_ring = NULL;
if (bp->rx_desc_ring) {
pci_free_consistent(bp->pdev,
sizeof(struct rx_bd) * RX_DESC_CNT,
bp->rx_desc_ring, bp->rx_desc_mapping);
bp->rx_desc_ring = NULL;
}
- if (bp->rx_buf_ring) {
- kfree(bp->rx_buf_ring);
- bp->rx_buf_ring = NULL;
- }
+ kfree(bp->rx_buf_ring);
+ bp->rx_buf_ring = NULL;
}
static int
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index f264ff1..8032126 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4241,6 +4241,43 @@
return 0;
}
+static void bond_activebackup_xmit_copy(struct sk_buff *skb,
+ struct bonding *bond,
+ struct slave *slave)
+{
+ struct sk_buff *skb2 = skb_copy(skb, GFP_ATOMIC);
+ struct ethhdr *eth_data;
+ u8 *hwaddr;
+ int res;
+
+ if (!skb2) {
+ printk(KERN_ERR DRV_NAME ": Error: "
+ "bond_activebackup_xmit_copy(): skb_copy() failed\n");
+ return;
+ }
+
+ skb2->mac.raw = (unsigned char *)skb2->data;
+ eth_data = eth_hdr(skb2);
+
+ /* Pick an appropriate source MAC address
+ * -- use slave's perm MAC addr, unless used by bond
+ * -- otherwise, borrow active slave's perm MAC addr
+ * since that will not be used
+ */
+ hwaddr = slave->perm_hwaddr;
+ if (!memcmp(eth_data->h_source, hwaddr, ETH_ALEN))
+ hwaddr = bond->curr_active_slave->perm_hwaddr;
+
+ /* Set source MAC address appropriately */
+ memcpy(eth_data->h_source, hwaddr, ETH_ALEN);
+
+ res = bond_dev_queue_xmit(bond, skb2, slave->dev);
+ if (res)
+ dev_kfree_skb(skb2);
+
+ return;
+}
+
/*
* in active-backup mode, we know that bond->curr_active_slave is always valid if
* the bond has a usable interface.
@@ -4257,10 +4294,26 @@
goto out;
}
- if (bond->curr_active_slave) { /* one usable interface */
- res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev);
+ if (!bond->curr_active_slave)
+ goto out;
+
+ /* Xmit IGMP frames on all slaves to ensure rapid fail-over
+ for multicast traffic on snooping switches */
+ if (skb->protocol == __constant_htons(ETH_P_IP) &&
+ skb->nh.iph->protocol == IPPROTO_IGMP) {
+ struct slave *slave, *active_slave;
+ int i;
+
+ active_slave = bond->curr_active_slave;
+ bond_for_each_slave_from_to(bond, slave, i, active_slave->next,
+ active_slave->prev)
+ if (IS_UP(slave->dev) &&
+ (slave->link == BOND_LINK_UP))
+ bond_activebackup_xmit_copy(skb, bond, slave);
}
+ res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev);
+
out:
if (res) {
/* no suitable interface, frame not sent */
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 2e61742..50f43db 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -489,7 +489,7 @@
/* local page allocation routines for the receive buffers. jumbo pages
* require at least 8K contiguous and 8K aligned buffers.
*/
-static cas_page_t *cas_page_alloc(struct cas *cp, const int flags)
+static cas_page_t *cas_page_alloc(struct cas *cp, const gfp_t flags)
{
cas_page_t *page;
@@ -561,7 +561,7 @@
}
/* replenish spares if needed */
-static void cas_spare_recover(struct cas *cp, const int flags)
+static void cas_spare_recover(struct cas *cp, const gfp_t flags)
{
struct list_head list, *elem, *tmp;
int needed, i;
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index a6078ad..bfdae10 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -182,6 +182,10 @@
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
+#elif defined(CONFIG_MACH_MP1000)
+#include <asm/arch/mp1000-seprom.h>
+static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0};
+static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0};
#else
static unsigned int netcard_portlist[] __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
@@ -590,6 +594,10 @@
cnt -= j;
}
} else
+#elif defined(CONFIG_MACH_MP1000)
+ if (1) {
+ memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN);
+ } else
#endif
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
@@ -649,6 +657,10 @@
if (1) {
printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n");
} else
+#elif defined(CONFIG_MACH_MP1000)
+ if (1) {
+ lp->force |= FORCE_RJ45;
+ } else
#endif
if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
@@ -1231,7 +1243,7 @@
else
#endif
{
-#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105)
+#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h
index decea26..f19d1eb 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/cs89x0.h
@@ -16,7 +16,7 @@
#include <linux/config.h>
-#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
+#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000)
/* IXDP2401/IXDP2801 uses dword-aligned register addressing */
#define CS89x0_PORT(reg) ((reg) * 2)
#else
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 521c831..f130bda 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -5,7 +5,7 @@
*
* adopted from sunlance.c by Richard van den Berg
*
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*
* additional sources:
* - PMAD-AA TURBOchannel Ethernet Module Functional Specification,
@@ -57,13 +57,15 @@
#include <linux/string.h>
#include <asm/addrspace.h>
+#include <asm/system.h>
+
#include <asm/dec/interrupts.h>
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
#include <asm/dec/kn01.h>
#include <asm/dec/machtype.h>
+#include <asm/dec/system.h>
#include <asm/dec/tc.h>
-#include <asm/system.h>
static char version[] __devinitdata =
"declance.c: v0.009 by Linux MIPS DECstation task force\n";
@@ -79,10 +81,6 @@
#define PMAD_LANCE 2
#define PMAX_LANCE 3
-#ifndef CONFIG_TC
-unsigned long system_base;
-unsigned long dmaptr;
-#endif
#define LE_CSR0 0
#define LE_CSR1 1
@@ -237,7 +235,7 @@
/*
* This works *only* for the ring descriptors
*/
-#define LANCE_ADDR(x) (PHYSADDR(x) >> 1)
+#define LANCE_ADDR(x) (CPHYSADDR(x) >> 1)
struct lance_private {
struct net_device *next;
@@ -697,12 +695,13 @@
spin_unlock(&lp->lock);
}
-static void lance_dma_merr_int(const int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t lance_dma_merr_int(const int irq, void *dev_id,
+ struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_id;
printk("%s: DMA error\n", dev->name);
+ return IRQ_HANDLED;
}
static irqreturn_t
@@ -1026,10 +1025,6 @@
unsigned long esar_base;
unsigned char *esar;
-#ifndef CONFIG_TC
- system_base = KN01_LANCE_BASE;
-#endif
-
if (dec_lance_debug && version_printed++ == 0)
printk(version);
@@ -1062,16 +1057,16 @@
switch (type) {
#ifdef CONFIG_TC
case ASIC_LANCE:
- dev->base_addr = system_base + IOASIC_LANCE;
+ dev->base_addr = CKSEG1ADDR(dec_kn_slot_base + IOASIC_LANCE);
/* buffer space for the on-board LANCE shared memory */
/*
* FIXME: ugly hack!
*/
- dev->mem_start = KSEG1ADDR(0x00020000);
+ dev->mem_start = CKSEG1ADDR(0x00020000);
dev->mem_end = dev->mem_start + 0x00020000;
dev->irq = dec_interrupt[DEC_IRQ_LANCE];
- esar_base = system_base + IOASIC_ESAR;
+ esar_base = CKSEG1ADDR(dec_kn_slot_base + IOASIC_ESAR);
/* Workaround crash with booting KN04 2.1k from Disk */
memset((void *)dev->mem_start, 0,
@@ -1101,14 +1096,14 @@
/* Setup I/O ASIC LANCE DMA. */
lp->dma_irq = dec_interrupt[DEC_IRQ_LANCE_MERR];
ioasic_write(IO_REG_LANCE_DMA_P,
- PHYSADDR(dev->mem_start) << 3);
+ CPHYSADDR(dev->mem_start) << 3);
break;
case PMAD_LANCE:
claim_tc_card(slot);
- dev->mem_start = get_tc_base_addr(slot);
+ dev->mem_start = CKSEG1ADDR(get_tc_base_addr(slot));
dev->base_addr = dev->mem_start + 0x100000;
dev->irq = get_tc_irq_nr(slot);
esar_base = dev->mem_start + 0x1c0002;
@@ -1137,9 +1132,9 @@
case PMAX_LANCE:
dev->irq = dec_interrupt[DEC_IRQ_LANCE];
- dev->base_addr = KN01_LANCE_BASE;
- dev->mem_start = KN01_LANCE_BASE + 0x01000000;
- esar_base = KN01_RTC_BASE + 1;
+ dev->base_addr = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE);
+ dev->mem_start = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE_MEM);
+ esar_base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_ESAR + 1);
lp->dma_irq = -1;
/*
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index e54fc10..abce1f7 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1140,11 +1140,11 @@
}
static int
-dm9000_drv_suspend(struct device *dev, pm_message_t state, u32 level)
+dm9000_drv_suspend(struct device *dev, pm_message_t state)
{
struct net_device *ndev = dev_get_drvdata(dev);
- if (ndev && level == SUSPEND_DISABLE) {
+ if (ndev) {
if (netif_running(ndev)) {
netif_device_detach(ndev);
dm9000_shutdown(ndev);
@@ -1154,12 +1154,12 @@
}
static int
-dm9000_drv_resume(struct device *dev, u32 level)
+dm9000_drv_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
board_info_t *db = (board_info_t *) ndev->priv;
- if (ndev && level == RESUME_ENABLE) {
+ if (ndev) {
if (netif_running(ndev)) {
dm9000_reset(db);
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 40887f0..eb169a8 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2201,6 +2201,7 @@
.phys_id = e100_phys_id,
.get_stats_count = e100_get_stats_count,
.get_ethtool_stats = e100_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
@@ -2351,7 +2352,8 @@
e100_phy_init(nic);
memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
- if(!is_valid_ether_addr(netdev->dev_addr)) {
+ memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
+ if(!is_valid_ether_addr(netdev->perm_addr)) {
DPRINTK(PROBE, ERR, "Invalid MAC address from "
"EEPROM, aborting.\n");
err = -EAGAIN;
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 092757b..3f653a9 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -72,6 +72,10 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
+#ifdef CONFIG_E1000_MQ
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#endif
#define BAR_0 0
#define BAR_1 1
@@ -165,10 +169,33 @@
uint16_t next_to_watch;
};
-struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; };
-struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; };
+struct e1000_ps_page { struct page *ps_page[PS_PAGE_BUFFERS]; };
+struct e1000_ps_page_dma { uint64_t ps_page_dma[PS_PAGE_BUFFERS]; };
-struct e1000_desc_ring {
+struct e1000_tx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ struct e1000_buffer previous_buffer_info;
+ spinlock_t tx_lock;
+ uint16_t tdh;
+ uint16_t tdt;
+ uint64_t pkt;
+};
+
+struct e1000_rx_ring {
/* pointer to the descriptor ring memory */
void *desc;
/* physical address of the descriptor ring */
@@ -186,6 +213,10 @@
/* arrays of page information for packet split */
struct e1000_ps_page *ps_page;
struct e1000_ps_page_dma *ps_page_dma;
+
+ uint16_t rdh;
+ uint16_t rdt;
+ uint64_t pkt;
};
#define E1000_DESC_UNUSED(R) \
@@ -227,9 +258,10 @@
unsigned long led_status;
/* TX */
- struct e1000_desc_ring tx_ring;
- struct e1000_buffer previous_buffer_info;
- spinlock_t tx_lock;
+ struct e1000_tx_ring *tx_ring; /* One per active queue */
+#ifdef CONFIG_E1000_MQ
+ struct e1000_tx_ring **cpu_tx_ring; /* per-cpu */
+#endif
uint32_t txd_cmd;
uint32_t tx_int_delay;
uint32_t tx_abs_int_delay;
@@ -246,19 +278,33 @@
/* RX */
#ifdef CONFIG_E1000_NAPI
- boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done,
- int work_to_do);
+ boolean_t (*clean_rx) (struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
#else
- boolean_t (*clean_rx) (struct e1000_adapter *adapter);
+ boolean_t (*clean_rx) (struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
#endif
- void (*alloc_rx_buf) (struct e1000_adapter *adapter);
- struct e1000_desc_ring rx_ring;
+ void (*alloc_rx_buf) (struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+ struct e1000_rx_ring *rx_ring; /* One per active queue */
+#ifdef CONFIG_E1000_NAPI
+ struct net_device *polling_netdev; /* One per active queue */
+#endif
+#ifdef CONFIG_E1000_MQ
+ struct net_device **cpu_netdev; /* per-cpu */
+ struct call_async_data_struct rx_sched_call_data;
+ int cpu_for_queue[4];
+#endif
+ int num_queues;
+
uint64_t hw_csum_err;
uint64_t hw_csum_good;
+ uint64_t rx_hdr_split;
uint32_t rx_int_delay;
uint32_t rx_abs_int_delay;
boolean_t rx_csum;
- boolean_t rx_ps;
+ unsigned int rx_ps_pages;
uint32_t gorcl;
uint64_t gorcl_old;
uint16_t rx_ps_bsize0;
@@ -278,8 +324,8 @@
struct e1000_phy_stats phy_stats;
uint32_t test_icr;
- struct e1000_desc_ring test_tx_ring;
- struct e1000_desc_ring test_rx_ring;
+ struct e1000_tx_ring test_tx_ring;
+ struct e1000_rx_ring test_rx_ring;
int msg_enable;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index f133ff0..9c7feae 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -39,10 +39,10 @@
extern void e1000_down(struct e1000_adapter *adapter);
extern void e1000_reset(struct e1000_adapter *adapter);
extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
-extern int e1000_setup_rx_resources(struct e1000_adapter *adapter);
-extern int e1000_setup_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_rx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_tx_resources(struct e1000_adapter *adapter);
+extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
extern void e1000_update_stats(struct e1000_adapter *adapter);
struct e1000_stats {
@@ -91,7 +91,8 @@
{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
{ "rx_long_byte_count", E1000_STAT(stats.gorcl) },
{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
- { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }
+ { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
+ { "rx_header_split", E1000_STAT(rx_hdr_split) },
};
#define E1000_STATS_LEN \
sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats)
@@ -546,8 +547,10 @@
ret_val = e1000_write_eeprom(hw, first_word,
last_word - first_word + 1, eeprom_buff);
- /* Update the checksum over the first part of the EEPROM if needed */
- if((ret_val == 0) && first_word <= EEPROM_CHECKSUM_REG)
+ /* Update the checksum over the first part of the EEPROM if needed
+ * and flush shadow RAM for 82573 conrollers */
+ if((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
+ (hw->mac_type == e1000_82573)))
e1000_update_eeprom_checksum(hw);
kfree(eeprom_buff);
@@ -576,8 +579,8 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
e1000_mac_type mac_type = adapter->hw.mac_type;
- struct e1000_desc_ring *txdr = &adapter->tx_ring;
- struct e1000_desc_ring *rxdr = &adapter->rx_ring;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ struct e1000_rx_ring *rxdr = adapter->rx_ring;
ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
E1000_MAX_82544_RXD;
@@ -597,20 +600,40 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
e1000_mac_type mac_type = adapter->hw.mac_type;
- struct e1000_desc_ring *txdr = &adapter->tx_ring;
- struct e1000_desc_ring *rxdr = &adapter->rx_ring;
- struct e1000_desc_ring tx_old, tx_new, rx_old, rx_new;
- int err;
+ struct e1000_tx_ring *txdr, *tx_old, *tx_new;
+ struct e1000_rx_ring *rxdr, *rx_old, *rx_new;
+ int i, err, tx_ring_size, rx_ring_size;
+
+ tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_queues;
+ rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_queues;
+
+ if (netif_running(adapter->netdev))
+ e1000_down(adapter);
tx_old = adapter->tx_ring;
rx_old = adapter->rx_ring;
+ adapter->tx_ring = kmalloc(tx_ring_size, GFP_KERNEL);
+ if (!adapter->tx_ring) {
+ err = -ENOMEM;
+ goto err_setup_rx;
+ }
+ memset(adapter->tx_ring, 0, tx_ring_size);
+
+ adapter->rx_ring = kmalloc(rx_ring_size, GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ err = -ENOMEM;
+ goto err_setup_rx;
+ }
+ memset(adapter->rx_ring, 0, rx_ring_size);
+
+ txdr = adapter->tx_ring;
+ rxdr = adapter->rx_ring;
+
if((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
return -EINVAL;
- if(netif_running(adapter->netdev))
- e1000_down(adapter);
-
rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD);
rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ?
E1000_MAX_RXD : E1000_MAX_82544_RXD));
@@ -621,11 +644,16 @@
E1000_MAX_TXD : E1000_MAX_82544_TXD));
E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+ for (i = 0; i < adapter->num_queues; i++) {
+ txdr[i].count = txdr->count;
+ rxdr[i].count = rxdr->count;
+ }
+
if(netif_running(adapter->netdev)) {
/* Try to get new resources before deleting old */
- if((err = e1000_setup_rx_resources(adapter)))
+ if ((err = e1000_setup_all_rx_resources(adapter)))
goto err_setup_rx;
- if((err = e1000_setup_tx_resources(adapter)))
+ if ((err = e1000_setup_all_tx_resources(adapter)))
goto err_setup_tx;
/* save the new, restore the old in order to free it,
@@ -635,8 +663,10 @@
tx_new = adapter->tx_ring;
adapter->rx_ring = rx_old;
adapter->tx_ring = tx_old;
- e1000_free_rx_resources(adapter);
- e1000_free_tx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
+ e1000_free_all_tx_resources(adapter);
+ kfree(tx_old);
+ kfree(rx_old);
adapter->rx_ring = rx_new;
adapter->tx_ring = tx_new;
if((err = e1000_up(adapter)))
@@ -645,7 +675,7 @@
return 0;
err_setup_tx:
- e1000_free_rx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
err_setup_rx:
adapter->rx_ring = rx_old;
adapter->tx_ring = tx_old;
@@ -696,6 +726,11 @@
* Some bits that get toggled are ignored.
*/
switch (adapter->hw.mac_type) {
+ /* there are several bits on newer hardware that are r/w */
+ case e1000_82571:
+ case e1000_82572:
+ toggle = 0x7FFFF3FF;
+ break;
case e1000_82573:
toggle = 0x7FFFF033;
break;
@@ -898,8 +933,8 @@
static void
e1000_free_desc_rings(struct e1000_adapter *adapter)
{
- struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
- struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
int i;
@@ -930,19 +965,16 @@
if(rxdr->desc)
pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
- if(txdr->buffer_info)
- kfree(txdr->buffer_info);
- if(rxdr->buffer_info)
- kfree(rxdr->buffer_info);
-
+ kfree(txdr->buffer_info);
+ kfree(rxdr->buffer_info);
return;
}
static int
e1000_setup_desc_rings(struct e1000_adapter *adapter)
{
- struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
- struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
uint32_t rctl;
int size, i, ret_val;
@@ -1245,6 +1277,8 @@
case e1000_82541_rev_2:
case e1000_82547:
case e1000_82547_rev_2:
+ case e1000_82571:
+ case e1000_82572:
case e1000_82573:
return e1000_integrated_phy_loopback(adapter);
break;
@@ -1340,8 +1374,8 @@
static int
e1000_run_loopback_test(struct e1000_adapter *adapter)
{
- struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
- struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
int i, j, k, l, lc, good_cnt, ret_val=0;
unsigned long time;
@@ -1509,6 +1543,7 @@
data[2] = 0;
data[3] = 0;
}
+ msleep_interruptible(4 * 1000);
}
static void
@@ -1625,7 +1660,7 @@
if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
- if(adapter->hw.mac_type < e1000_82573) {
+ if(adapter->hw.mac_type < e1000_82571) {
if(!adapter->blink_timer.function) {
init_timer(&adapter->blink_timer);
adapter->blink_timer.function = e1000_led_blink_callback;
@@ -1739,6 +1774,7 @@
.phys_id = e1000_phys_id,
.get_stats_count = e1000_get_stats_count,
.get_ethtool_stats = e1000_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
void e1000_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 045f542..8fc876d 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -83,14 +83,14 @@
static const
uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
- { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43,
- 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58,
- 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74,
- 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90,
- 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108,
- 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124,
- 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128,
- 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128};
+ { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+ 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
+ 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
+ 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
+ 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
+ 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
+ 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
+ 104, 109, 114, 118, 121, 124};
/******************************************************************************
@@ -286,7 +286,6 @@
case E1000_DEV_ID_82546GB_FIBER:
case E1000_DEV_ID_82546GB_SERDES:
case E1000_DEV_ID_82546GB_PCIE:
- case E1000_DEV_ID_82546GB_QUAD_COPPER:
hw->mac_type = e1000_82546_rev_3;
break;
case E1000_DEV_ID_82541EI:
@@ -305,8 +304,19 @@
case E1000_DEV_ID_82547GI:
hw->mac_type = e1000_82547_rev_2;
break;
+ case E1000_DEV_ID_82571EB_COPPER:
+ case E1000_DEV_ID_82571EB_FIBER:
+ case E1000_DEV_ID_82571EB_SERDES:
+ hw->mac_type = e1000_82571;
+ break;
+ case E1000_DEV_ID_82572EI_COPPER:
+ case E1000_DEV_ID_82572EI_FIBER:
+ case E1000_DEV_ID_82572EI_SERDES:
+ hw->mac_type = e1000_82572;
+ break;
case E1000_DEV_ID_82573E:
case E1000_DEV_ID_82573E_IAMT:
+ case E1000_DEV_ID_82573L:
hw->mac_type = e1000_82573;
break;
default:
@@ -315,6 +325,8 @@
}
switch(hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
case e1000_82573:
hw->eeprom_semaphore_present = TRUE;
/* fall through */
@@ -351,6 +363,8 @@
switch (hw->device_id) {
case E1000_DEV_ID_82545GM_SERDES:
case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82572EI_SERDES:
hw->media_type = e1000_media_type_internal_serdes;
break;
default:
@@ -523,6 +537,8 @@
E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
E1000_WRITE_FLUSH(hw);
/* fall through */
+ case e1000_82571:
+ case e1000_82572:
ret_val = e1000_get_auto_rd_done(hw);
if(ret_val)
/* We don't want to continue accessing MAC registers. */
@@ -683,6 +699,9 @@
switch (hw->mac_type) {
default:
break;
+ case e1000_82571:
+ case e1000_82572:
+ ctrl |= (1 << 22);
case e1000_82573:
ctrl |= E1000_TXDCTL_COUNT_DESC;
break;
@@ -694,6 +713,26 @@
e1000_enable_tx_pkt_filtering(hw);
}
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ ctrl = E1000_READ_REG(hw, TXDCTL1);
+ ctrl &= ~E1000_TXDCTL_WTHRESH;
+ ctrl |= E1000_TXDCTL_COUNT_DESC | E1000_TXDCTL_FULL_TX_DESC_WB;
+ ctrl |= (1 << 22);
+ E1000_WRITE_REG(hw, TXDCTL1, ctrl);
+ break;
+ }
+
+
+
+ if (hw->mac_type == e1000_82573) {
+ uint32_t gcr = E1000_READ_REG(hw, GCR);
+ gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
+ E1000_WRITE_REG(hw, GCR, gcr);
+ }
/* Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
@@ -878,6 +917,14 @@
DEBUGFUNC("e1000_setup_fiber_serdes_link");
+ /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists
+ * until explicitly turned off or a power cycle is performed. A read to
+ * the register does not indicate its status. Therefore, we ensure
+ * loopback mode is disabled during initialization.
+ */
+ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572)
+ E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK);
+
/* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be
* set when the optics detect a signal. On older adapters, it will be
* cleared when there is a signal. This applies to fiber media only.
@@ -2943,6 +2990,8 @@
switch (hw->mac_type) {
case e1000_82541_rev_2:
+ case e1000_82571:
+ case e1000_82572:
ret_val = e1000_phy_hw_reset(hw);
if(ret_val)
return ret_val;
@@ -2981,6 +3030,16 @@
DEBUGFUNC("e1000_detect_gig_phy");
+ /* The 82571 firmware may still be configuring the PHY. In this
+ * case, we cannot access the PHY until the configuration is done. So
+ * we explicitly set the PHY values. */
+ if(hw->mac_type == e1000_82571 ||
+ hw->mac_type == e1000_82572) {
+ hw->phy_id = IGP01E1000_I_PHY_ID;
+ hw->phy_type = e1000_phy_igp_2;
+ return E1000_SUCCESS;
+ }
+
/* Read the PHY ID Registers to identify which PHY is onboard. */
ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
if(ret_val)
@@ -3334,6 +3393,21 @@
eeprom->use_eerd = FALSE;
eeprom->use_eewr = FALSE;
break;
+ case e1000_82571:
+ case e1000_82572:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = FALSE;
+ eeprom->use_eewr = FALSE;
+ break;
case e1000_82573:
eeprom->type = e1000_eeprom_spi;
eeprom->opcode_bits = 8;
@@ -3543,25 +3617,26 @@
eecd = E1000_READ_REG(hw, EECD);
if (hw->mac_type != e1000_82573) {
- /* Request EEPROM Access */
- if(hw->mac_type > e1000_82544) {
- eecd |= E1000_EECD_REQ;
- E1000_WRITE_REG(hw, EECD, eecd);
- eecd = E1000_READ_REG(hw, EECD);
- while((!(eecd & E1000_EECD_GNT)) &&
- (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
- i++;
- udelay(5);
- eecd = E1000_READ_REG(hw, EECD);
- }
- if(!(eecd & E1000_EECD_GNT)) {
- eecd &= ~E1000_EECD_REQ;
+ /* Request EEPROM Access */
+ if(hw->mac_type > e1000_82544) {
+ eecd |= E1000_EECD_REQ;
E1000_WRITE_REG(hw, EECD, eecd);
- DEBUGOUT("Could not acquire EEPROM grant\n");
- return -E1000_ERR_EEPROM;
+ eecd = E1000_READ_REG(hw, EECD);
+ while((!(eecd & E1000_EECD_GNT)) &&
+ (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
+ i++;
+ udelay(5);
+ eecd = E1000_READ_REG(hw, EECD);
+ }
+ if(!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ E1000_WRITE_REG(hw, EECD, eecd);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+ e1000_put_hw_eeprom_semaphore(hw);
+ return -E1000_ERR_EEPROM;
+ }
}
}
- }
/* Setup EEPROM for Read/Write */
@@ -4064,7 +4139,7 @@
return -E1000_ERR_EEPROM;
}
- /* 82573 reads only through eerd */
+ /* 82573 writes only through eewr */
if(eeprom->use_eewr == TRUE)
return e1000_write_eeprom_eewr(hw, offset, words, data);
@@ -4353,9 +4428,16 @@
hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF);
hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8);
}
- if(((hw->mac_type == e1000_82546) || (hw->mac_type == e1000_82546_rev_3)) &&
- (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1))
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82571:
+ if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
hw->perm_mac_addr[5] ^= 0x01;
+ break;
+ }
for(i = 0; i < NODE_ADDRESS_SIZE; i++)
hw->mac_addr[i] = hw->perm_mac_addr[i];
@@ -4385,6 +4467,12 @@
e1000_rar_set(hw, hw->mac_addr, 0);
rar_num = E1000_RAR_ENTRIES;
+
+ /* Reserve a spot for the Locally Administered Address to work around
+ * an 82571 issue in which a reset on one port will reload the MAC on
+ * the other port. */
+ if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE))
+ rar_num -= 1;
/* Zero out the other 15 receive addresses. */
DEBUGOUT("Clearing RAR[1-15]\n");
for(i = 1; i < rar_num; i++) {
@@ -4427,6 +4515,12 @@
/* Clear RAR[1-15] */
DEBUGOUT(" Clearing RAR[1-15]\n");
num_rar_entry = E1000_RAR_ENTRIES;
+ /* Reserve a spot for the Locally Administered Address to work around
+ * an 82571 issue in which a reset on one port will reload the MAC on
+ * the other port. */
+ if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE))
+ num_rar_entry -= 1;
+
for(i = rar_used_count; i < num_rar_entry; i++) {
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
@@ -4984,7 +5078,6 @@
temp = E1000_READ_REG(hw, ICTXQEC);
temp = E1000_READ_REG(hw, ICTXQMTC);
temp = E1000_READ_REG(hw, ICRXDMTC);
-
}
/******************************************************************************
@@ -5151,6 +5244,8 @@
hw->bus_speed = e1000_bus_speed_unknown;
hw->bus_width = e1000_bus_width_unknown;
break;
+ case e1000_82571:
+ case e1000_82572:
case e1000_82573:
hw->bus_type = e1000_bus_type_pci_express;
hw->bus_speed = e1000_bus_speed_2500;
@@ -5250,6 +5345,7 @@
int32_t ret_val;
uint16_t agc_value = 0;
uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ uint16_t max_agc = 0;
uint16_t i, phy_data;
uint16_t cable_length;
@@ -5338,6 +5434,40 @@
IGP01E1000_AGC_RANGE) : 0;
*max_length = e1000_igp_cable_length_table[agc_value] +
IGP01E1000_AGC_RANGE;
+ } else if (hw->phy_type == e1000_phy_igp_2) {
+ uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
+ {IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D};
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Getting bits 15:9, which represent the combination of course and
+ * fine gain values. The result is a number that can be put into
+ * the lookup table to obtain the approximate cable length. */
+ cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
+
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc])
+ min_agc = cur_agc;
+ if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc])
+ max_agc = cur_agc;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc];
+ }
+
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]);
+ agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+ /* Calculate cable length with the error range of +/- 10 meters. */
+ *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ *max_length = agc_value + IGP02E1000_AGC_RANGE;
}
return E1000_SUCCESS;
@@ -6465,6 +6595,8 @@
default:
msec_delay(5);
break;
+ case e1000_82571:
+ case e1000_82572:
case e1000_82573:
while(timeout) {
if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break;
@@ -6494,10 +6626,31 @@
int32_t
e1000_get_phy_cfg_done(struct e1000_hw *hw)
{
+ int32_t timeout = PHY_CFG_TIMEOUT;
+ uint32_t cfg_mask = E1000_EEPROM_CFG_DONE;
+
DEBUGFUNC("e1000_get_phy_cfg_done");
- /* Simply wait for 10ms */
- msec_delay(10);
+ switch (hw->mac_type) {
+ default:
+ msec_delay(10);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ while (timeout) {
+ if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask)
+ break;
+ else
+ msec_delay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("MNG configuration cycle has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+ break;
+ }
return E1000_SUCCESS;
}
@@ -6569,8 +6722,7 @@
return;
swsm = E1000_READ_REG(hw, SWSM);
- /* Release both semaphores. */
- swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+ swsm &= ~(E1000_SWSM_SWESMBI);
E1000_WRITE_REG(hw, SWSM, swsm);
}
@@ -6606,6 +6758,8 @@
* if this is the case. We read FWSM to determine the manageability mode.
*/
switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
case e1000_82573:
fwsm = E1000_READ_REG(hw, FWSM);
if((fwsm & E1000_FWSM_MODE_MASK) != 0)
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 51c2b3a..4f2c196 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -57,6 +57,8 @@
e1000_82541_rev_2,
e1000_82547,
e1000_82547_rev_2,
+ e1000_82571,
+ e1000_82572,
e1000_82573,
e1000_num_macs
} e1000_mac_type;
@@ -478,10 +480,16 @@
#define E1000_DEV_ID_82546GB_SERDES 0x107B
#define E1000_DEV_ID_82546GB_PCIE 0x108A
#define E1000_DEV_ID_82547EI 0x1019
+#define E1000_DEV_ID_82571EB_COPPER 0x105E
+#define E1000_DEV_ID_82571EB_FIBER 0x105F
+#define E1000_DEV_ID_82571EB_SERDES 0x1060
+#define E1000_DEV_ID_82572EI_COPPER 0x107D
+#define E1000_DEV_ID_82572EI_FIBER 0x107E
+#define E1000_DEV_ID_82572EI_SERDES 0x107F
#define E1000_DEV_ID_82573E 0x108B
#define E1000_DEV_ID_82573E_IAMT 0x108C
+#define E1000_DEV_ID_82573L 0x109A
-#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6
@@ -833,6 +841,8 @@
#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_DISABLE_SERDES_LOOPBACK 0x0400
+
/* Register Set. (82543, 82544)
*
* Registers are defined to be 32 bits and should be accessed as 32 bit values.
@@ -853,6 +863,7 @@
#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
#define E1000_FLA 0x0001C /* Flash Access - RW */
#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
#define E1000_FCT 0x00030 /* Flow Control Type - RW */
@@ -864,6 +875,12 @@
#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
+#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
+#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
+#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
+#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
+#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
@@ -895,6 +912,12 @@
#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
+#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
+#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
+#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
+#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
#define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */
#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
@@ -980,15 +1003,15 @@
#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
-#define E1000_IAC 0x4100 /* Interrupt Assertion Count */
-#define E1000_ICRXPTC 0x4104 /* Interrupt Cause Rx Packet Timer Expire Count */
-#define E1000_ICRXATC 0x4108 /* Interrupt Cause Rx Absolute Timer Expire Count */
-#define E1000_ICTXPTC 0x410C /* Interrupt Cause Tx Packet Timer Expire Count */
-#define E1000_ICTXATC 0x4110 /* Interrupt Cause Tx Absolute Timer Expire Count */
-#define E1000_ICTXQEC 0x4118 /* Interrupt Cause Tx Queue Empty Count */
-#define E1000_ICTXQMTC 0x411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
-#define E1000_ICRXDMTC 0x4120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
-#define E1000_ICRXOC 0x4124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
@@ -1018,6 +1041,14 @@
#define E1000_FWSM 0x05B54 /* FW Semaphore */
#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
#define E1000_HICR 0x08F00 /* Host Inteface Control */
+
+/* RSS registers */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
+#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
/* Register Set (82542)
*
* Some of the 82542 registers are located at different offsets than they are
@@ -1032,6 +1063,7 @@
#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
#define E1000_82542_FLA E1000_FLA
#define E1000_82542_MDIC E1000_MDIC
+#define E1000_82542_SCTL E1000_SCTL
#define E1000_82542_FCAL E1000_FCAL
#define E1000_82542_FCAH E1000_FCAH
#define E1000_82542_FCT E1000_FCT
@@ -1049,6 +1081,18 @@
#define E1000_82542_RDLEN 0x00118
#define E1000_82542_RDH 0x00120
#define E1000_82542_RDT 0x00128
+#define E1000_82542_RDTR0 E1000_82542_RDTR
+#define E1000_82542_RDBAL0 E1000_82542_RDBAL
+#define E1000_82542_RDBAH0 E1000_82542_RDBAH
+#define E1000_82542_RDLEN0 E1000_82542_RDLEN
+#define E1000_82542_RDH0 E1000_82542_RDH
+#define E1000_82542_RDT0 E1000_82542_RDT
+#define E1000_82542_RDTR1 0x00130
+#define E1000_82542_RDBAL1 0x00138
+#define E1000_82542_RDBAH1 0x0013C
+#define E1000_82542_RDLEN1 0x00140
+#define E1000_82542_RDH1 0x00148
+#define E1000_82542_RDT1 0x00150
#define E1000_82542_FCRTH 0x00160
#define E1000_82542_FCRTL 0x00168
#define E1000_82542_FCTTV E1000_FCTTV
@@ -1197,6 +1241,13 @@
#define E1000_82542_ICRXOC E1000_ICRXOC
#define E1000_82542_HICR E1000_HICR
+#define E1000_82542_CPUVEC E1000_CPUVEC
+#define E1000_82542_MRQC E1000_MRQC
+#define E1000_82542_RETA E1000_RETA
+#define E1000_82542_RSSRK E1000_RSSRK
+#define E1000_82542_RSSIM E1000_RSSIM
+#define E1000_82542_RSSIR E1000_RSSIR
+
/* Statistics counters collected by the MAC */
struct e1000_hw_stats {
uint64_t crcerrs;
@@ -1336,6 +1387,7 @@
boolean_t serdes_link_down;
boolean_t tbi_compatibility_en;
boolean_t tbi_compatibility_on;
+ boolean_t laa_is_present;
boolean_t phy_reset_disable;
boolean_t fc_send_xon;
boolean_t fc_strict_ieee;
@@ -1374,6 +1426,7 @@
#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
@@ -1491,6 +1544,8 @@
#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
@@ -1524,6 +1579,7 @@
#define E1000_LEDCTL_LED2_BLINK 0x00800000
#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
#define E1000_LEDCTL_LED3_IVRT 0x40000000
#define E1000_LEDCTL_LED3_BLINK 0x80000000
@@ -1784,6 +1840,16 @@
#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+/* Multiple Receive Queue Control */
+#define E1000_MRQC_ENABLE_MASK 0x00000003
+#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
+#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
/* Definitions for power management and wakeup registers */
/* Wake Up Control */
@@ -1928,6 +1994,7 @@
#define E1000_MDALIGN 4096
#define E1000_GCR_BEM32 0x00400000
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
/* Function Active and Power State to MNG */
#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
#define E1000_FACTPS_LAN0_VALID 0x00000004
@@ -1980,6 +2047,7 @@
/* EEPROM Word Offsets */
#define EEPROM_COMPAT 0x0003
#define EEPROM_ID_LED_SETTINGS 0x0004
+#define EEPROM_VERSION 0x0005
#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
#define EEPROM_PHY_CLASS_WORD 0x0007
#define EEPROM_INIT_CONTROL1_REG 0x000A
@@ -1990,6 +2058,8 @@
#define EEPROM_FLASH_VERSION 0x0032
#define EEPROM_CHECKSUM_REG 0x003F
+#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
+
/* Word definitions for ID LED Settings */
#define ID_LED_RESERVED_0000 0x0000
#define ID_LED_RESERVED_FFFF 0xFFFF
@@ -2108,6 +2178,8 @@
#define E1000_PBA_22K 0x0016
#define E1000_PBA_24K 0x0018
#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_38K 0x0026
#define E1000_PBA_40K 0x0028
#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
@@ -2592,11 +2664,11 @@
/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
-#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 128
+#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
/* The precision error of the cable length is +/- 10 meters */
#define IGP01E1000_AGC_RANGE 10
-#define IGP02E1000_AGC_RANGE 10
+#define IGP02E1000_AGC_RANGE 15
/* IGP01E1000 PCS Initialization register */
/* bits 3:6 in the PCS registers stores the channels polarity */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ee687c9..efbbda7 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -43,7 +43,7 @@
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "6.0.60-k2"DRIVERNAPI
+#define DRV_VERSION "6.1.16-k2"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
@@ -80,6 +80,9 @@
INTEL_E1000_ETHERNET_DEVICE(0x1026),
INTEL_E1000_ETHERNET_DEVICE(0x1027),
INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x105E),
+ INTEL_E1000_ETHERNET_DEVICE(0x105F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1060),
INTEL_E1000_ETHERNET_DEVICE(0x1075),
INTEL_E1000_ETHERNET_DEVICE(0x1076),
INTEL_E1000_ETHERNET_DEVICE(0x1077),
@@ -88,10 +91,13 @@
INTEL_E1000_ETHERNET_DEVICE(0x107A),
INTEL_E1000_ETHERNET_DEVICE(0x107B),
INTEL_E1000_ETHERNET_DEVICE(0x107C),
+ INTEL_E1000_ETHERNET_DEVICE(0x107D),
+ INTEL_E1000_ETHERNET_DEVICE(0x107E),
+ INTEL_E1000_ETHERNET_DEVICE(0x107F),
INTEL_E1000_ETHERNET_DEVICE(0x108A),
INTEL_E1000_ETHERNET_DEVICE(0x108B),
INTEL_E1000_ETHERNET_DEVICE(0x108C),
- INTEL_E1000_ETHERNET_DEVICE(0x1099),
+ INTEL_E1000_ETHERNET_DEVICE(0x109A),
/* required last entry */
{0,}
};
@@ -102,10 +108,18 @@
void e1000_down(struct e1000_adapter *adapter);
void e1000_reset(struct e1000_adapter *adapter);
int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
-int e1000_setup_tx_resources(struct e1000_adapter *adapter);
-int e1000_setup_rx_resources(struct e1000_adapter *adapter);
-void e1000_free_tx_resources(struct e1000_adapter *adapter);
-void e1000_free_rx_resources(struct e1000_adapter *adapter);
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr);
+int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr);
+void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
void e1000_update_stats(struct e1000_adapter *adapter);
/* Local Function Prototypes */
@@ -114,14 +128,22 @@
static void e1000_exit_module(void);
static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
static void __devexit e1000_remove(struct pci_dev *pdev);
+static int e1000_alloc_queues(struct e1000_adapter *adapter);
+#ifdef CONFIG_E1000_MQ
+static void e1000_setup_queue_mapping(struct e1000_adapter *adapter);
+#endif
static int e1000_sw_init(struct e1000_adapter *adapter);
static int e1000_open(struct net_device *netdev);
static int e1000_close(struct net_device *netdev);
static void e1000_configure_tx(struct e1000_adapter *adapter);
static void e1000_configure_rx(struct e1000_adapter *adapter);
static void e1000_setup_rctl(struct e1000_adapter *adapter);
-static void e1000_clean_tx_ring(struct e1000_adapter *adapter);
-static void e1000_clean_rx_ring(struct e1000_adapter *adapter);
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
static void e1000_set_multi(struct net_device *netdev);
static void e1000_update_phy_info(unsigned long data);
static void e1000_watchdog(unsigned long data);
@@ -132,19 +154,26 @@
static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
static irqreturn_t e1000_intr(int irq, void *data, struct pt_regs *regs);
-static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter);
+static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
#ifdef CONFIG_E1000_NAPI
-static int e1000_clean(struct net_device *netdev, int *budget);
+static int e1000_clean(struct net_device *poll_dev, int *budget);
static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do);
static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do);
#else
-static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter);
-static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter);
+static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
#endif
-static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter);
-static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter);
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd);
@@ -162,8 +191,8 @@
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
static void e1000_restore_vlan(struct e1000_adapter *adapter);
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
static int e1000_resume(struct pci_dev *pdev);
#endif
@@ -172,6 +201,11 @@
static void e1000_netpoll (struct net_device *netdev);
#endif
+#ifdef CONFIG_E1000_MQ
+/* for multiple Rx queues */
+void e1000_rx_schedule(void *data);
+#endif
+
/* Exported from other modules */
extern void e1000_check_options(struct e1000_adapter *adapter);
@@ -289,7 +323,7 @@
e1000_up(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- int err;
+ int i, err;
/* hardware has been reset, we need to reload some things */
@@ -308,7 +342,8 @@
e1000_configure_tx(adapter);
e1000_setup_rctl(adapter);
e1000_configure_rx(adapter);
- adapter->alloc_rx_buf(adapter);
+ for (i = 0; i < adapter->num_queues; i++)
+ adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]);
#ifdef CONFIG_PCI_MSI
if(adapter->hw.mac_type > e1000_82547_rev_2) {
@@ -344,6 +379,9 @@
struct net_device *netdev = adapter->netdev;
e1000_irq_disable(adapter);
+#ifdef CONFIG_E1000_MQ
+ while (atomic_read(&adapter->rx_sched_call_data.count) != 0);
+#endif
free_irq(adapter->pdev->irq, netdev);
#ifdef CONFIG_PCI_MSI
if(adapter->hw.mac_type > e1000_82547_rev_2 &&
@@ -363,11 +401,10 @@
netif_stop_queue(netdev);
e1000_reset(adapter);
- e1000_clean_tx_ring(adapter);
- e1000_clean_rx_ring(adapter);
+ e1000_clean_all_tx_rings(adapter);
+ e1000_clean_all_rx_rings(adapter);
- /* If WoL is not enabled
- * and management mode is not IAMT
+ /* If WoL is not enabled and management mode is not IAMT
* Power down the PHY so no link is implied when interface is down */
if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
adapter->hw.media_type == e1000_media_type_copper &&
@@ -398,6 +435,10 @@
case e1000_82547_rev_2:
pba = E1000_PBA_30K;
break;
+ case e1000_82571:
+ case e1000_82572:
+ pba = E1000_PBA_38K;
+ break;
case e1000_82573:
pba = E1000_PBA_12K;
break;
@@ -475,6 +516,7 @@
struct net_device *netdev;
struct e1000_adapter *adapter;
unsigned long mmio_start, mmio_len;
+ uint32_t ctrl_ext;
uint32_t swsm;
static int cards_found = 0;
@@ -614,8 +656,9 @@
if(e1000_read_mac_addr(&adapter->hw))
DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
- if(!is_valid_ether_addr(netdev->dev_addr)) {
+ if(!is_valid_ether_addr(netdev->perm_addr)) {
DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
err = -EIO;
goto err_eeprom;
@@ -687,6 +730,12 @@
/* Let firmware know the driver has taken over */
switch(adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+ break;
case e1000_82573:
swsm = E1000_READ_REG(&adapter->hw, SWSM);
E1000_WRITE_REG(&adapter->hw, SWSM,
@@ -731,7 +780,11 @@
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
+ uint32_t ctrl_ext;
uint32_t manc, swsm;
+#ifdef CONFIG_E1000_NAPI
+ int i;
+#endif
flush_scheduled_work();
@@ -745,6 +798,12 @@
}
switch(adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+ break;
case e1000_82573:
swsm = E1000_READ_REG(&adapter->hw, SWSM);
E1000_WRITE_REG(&adapter->hw, SWSM,
@@ -756,13 +815,27 @@
}
unregister_netdev(netdev);
+#ifdef CONFIG_E1000_NAPI
+ for (i = 0; i < adapter->num_queues; i++)
+ __dev_put(&adapter->polling_netdev[i]);
+#endif
if(!e1000_check_phy_reset_block(&adapter->hw))
e1000_phy_hw_reset(&adapter->hw);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+#ifdef CONFIG_E1000_NAPI
+ kfree(adapter->polling_netdev);
+#endif
+
iounmap(adapter->hw.hw_addr);
pci_release_regions(pdev);
+#ifdef CONFIG_E1000_MQ
+ free_percpu(adapter->cpu_netdev);
+ free_percpu(adapter->cpu_tx_ring);
+#endif
free_netdev(netdev);
pci_disable_device(pdev);
@@ -783,6 +856,9 @@
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
+#ifdef CONFIG_E1000_NAPI
+ int i;
+#endif
/* PCI config space info */
@@ -840,14 +916,123 @@
hw->master_slave = E1000_MASTER_SLAVE;
}
+#ifdef CONFIG_E1000_MQ
+ /* Number of supported queues */
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ adapter->num_queues = 2;
+ break;
+ default:
+ adapter->num_queues = 1;
+ break;
+ }
+ adapter->num_queues = min(adapter->num_queues, num_online_cpus());
+#else
+ adapter->num_queues = 1;
+#endif
+
+ if (e1000_alloc_queues(adapter)) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+#ifdef CONFIG_E1000_NAPI
+ for (i = 0; i < adapter->num_queues; i++) {
+ adapter->polling_netdev[i].priv = adapter;
+ adapter->polling_netdev[i].poll = &e1000_clean;
+ adapter->polling_netdev[i].weight = 64;
+ dev_hold(&adapter->polling_netdev[i]);
+ set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
+ }
+#endif
+
+#ifdef CONFIG_E1000_MQ
+ e1000_setup_queue_mapping(adapter);
+#endif
+
atomic_set(&adapter->irq_sem, 1);
spin_lock_init(&adapter->stats_lock);
- spin_lock_init(&adapter->tx_lock);
return 0;
}
/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time. The polling_netdev array is
+ * intended for Multiqueue, but should work fine with a single queue.
+ **/
+
+static int __devinit
+e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ int size;
+
+ size = sizeof(struct e1000_tx_ring) * adapter->num_queues;
+ adapter->tx_ring = kmalloc(size, GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+ memset(adapter->tx_ring, 0, size);
+
+ size = sizeof(struct e1000_rx_ring) * adapter->num_queues;
+ adapter->rx_ring = kmalloc(size, GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+ memset(adapter->rx_ring, 0, size);
+
+#ifdef CONFIG_E1000_NAPI
+ size = sizeof(struct net_device) * adapter->num_queues;
+ adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
+ if (!adapter->polling_netdev) {
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+ return -ENOMEM;
+ }
+ memset(adapter->polling_netdev, 0, size);
+#endif
+
+ return E1000_SUCCESS;
+}
+
+#ifdef CONFIG_E1000_MQ
+static void __devinit
+e1000_setup_queue_mapping(struct e1000_adapter *adapter)
+{
+ int i, cpu;
+
+ adapter->rx_sched_call_data.func = e1000_rx_schedule;
+ adapter->rx_sched_call_data.info = adapter->netdev;
+ cpus_clear(adapter->rx_sched_call_data.cpumask);
+
+ adapter->cpu_netdev = alloc_percpu(struct net_device *);
+ adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *);
+
+ lock_cpu_hotplug();
+ i = 0;
+ for_each_online_cpu(cpu) {
+ *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues];
+ /* This is incomplete because we'd like to assign separate
+ * physical cpus to these netdev polling structures and
+ * avoid saturating a subset of cpus.
+ */
+ if (i < adapter->num_queues) {
+ *per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i];
+ adapter->cpu_for_queue[i] = cpu;
+ } else
+ *per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL;
+
+ i++;
+ }
+ unlock_cpu_hotplug();
+}
+#endif
+
+/**
* e1000_open - Called when a network interface is made active
* @netdev: network interface device structure
*
@@ -868,12 +1053,12 @@
/* allocate transmit descriptors */
- if((err = e1000_setup_tx_resources(adapter)))
+ if ((err = e1000_setup_all_tx_resources(adapter)))
goto err_setup_tx;
/* allocate receive descriptors */
- if((err = e1000_setup_rx_resources(adapter)))
+ if ((err = e1000_setup_all_rx_resources(adapter)))
goto err_setup_rx;
if((err = e1000_up(adapter)))
@@ -887,9 +1072,9 @@
return E1000_SUCCESS;
err_up:
- e1000_free_rx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
err_setup_rx:
- e1000_free_tx_resources(adapter);
+ e1000_free_all_tx_resources(adapter);
err_setup_tx:
e1000_reset(adapter);
@@ -915,8 +1100,8 @@
e1000_down(adapter);
- e1000_free_tx_resources(adapter);
- e1000_free_rx_resources(adapter);
+ e1000_free_all_tx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
if((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
@@ -951,25 +1136,28 @@
/**
* e1000_setup_tx_resources - allocate Tx resources (Descriptors)
* @adapter: board private structure
+ * @txdr: tx descriptor ring (for a specific queue) to setup
*
* Return 0 on success, negative on failure
**/
int
-e1000_setup_tx_resources(struct e1000_adapter *adapter)
+e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr)
{
- struct e1000_desc_ring *txdr = &adapter->tx_ring;
struct pci_dev *pdev = adapter->pdev;
int size;
size = sizeof(struct e1000_buffer) * txdr->count;
- txdr->buffer_info = vmalloc(size);
+
+ txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
if(!txdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the transmit descriptor ring\n");
return -ENOMEM;
}
memset(txdr->buffer_info, 0, size);
+ memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer));
/* round up to nearest 4K */
@@ -1018,11 +1206,41 @@
txdr->next_to_use = 0;
txdr->next_to_clean = 0;
+ spin_lock_init(&txdr->tx_lock);
return 0;
}
/**
+ * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not). It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int
+e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_queues; i++) {
+ err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Tx Queue %u failed\n", i);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
* e1000_configure_tx - Configure 8254x Transmit Unit after Reset
* @adapter: board private structure
*
@@ -1032,23 +1250,43 @@
static void
e1000_configure_tx(struct e1000_adapter *adapter)
{
- uint64_t tdba = adapter->tx_ring.dma;
- uint32_t tdlen = adapter->tx_ring.count * sizeof(struct e1000_tx_desc);
- uint32_t tctl, tipg;
-
- E1000_WRITE_REG(&adapter->hw, TDBAL, (tdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(&adapter->hw, TDBAH, (tdba >> 32));
-
- E1000_WRITE_REG(&adapter->hw, TDLEN, tdlen);
+ uint64_t tdba;
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t tdlen, tctl, tipg, tarc;
/* Setup the HW Tx Head and Tail descriptor pointers */
- E1000_WRITE_REG(&adapter->hw, TDH, 0);
- E1000_WRITE_REG(&adapter->hw, TDT, 0);
+ switch (adapter->num_queues) {
+ case 2:
+ tdba = adapter->tx_ring[1].dma;
+ tdlen = adapter->tx_ring[1].count *
+ sizeof(struct e1000_tx_desc);
+ E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, TDBAH1, (tdba >> 32));
+ E1000_WRITE_REG(hw, TDLEN1, tdlen);
+ E1000_WRITE_REG(hw, TDH1, 0);
+ E1000_WRITE_REG(hw, TDT1, 0);
+ adapter->tx_ring[1].tdh = E1000_TDH1;
+ adapter->tx_ring[1].tdt = E1000_TDT1;
+ /* Fall Through */
+ case 1:
+ default:
+ tdba = adapter->tx_ring[0].dma;
+ tdlen = adapter->tx_ring[0].count *
+ sizeof(struct e1000_tx_desc);
+ E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
+ E1000_WRITE_REG(hw, TDLEN, tdlen);
+ E1000_WRITE_REG(hw, TDH, 0);
+ E1000_WRITE_REG(hw, TDT, 0);
+ adapter->tx_ring[0].tdh = E1000_TDH;
+ adapter->tx_ring[0].tdt = E1000_TDT;
+ break;
+ }
/* Set the default values for the Tx Inter Packet Gap timer */
- switch (adapter->hw.mac_type) {
+ switch (hw->mac_type) {
case e1000_82542_rev2_0:
case e1000_82542_rev2_1:
tipg = DEFAULT_82542_TIPG_IPGT;
@@ -1056,67 +1294,81 @@
tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
break;
default:
- if(adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes)
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes)
tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
else
tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
}
- E1000_WRITE_REG(&adapter->hw, TIPG, tipg);
+ E1000_WRITE_REG(hw, TIPG, tipg);
/* Set the Tx Interrupt Delay register */
- E1000_WRITE_REG(&adapter->hw, TIDV, adapter->tx_int_delay);
- if(adapter->hw.mac_type >= e1000_82540)
- E1000_WRITE_REG(&adapter->hw, TADV, adapter->tx_abs_int_delay);
+ E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= e1000_82540)
+ E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
/* Program the Transmit Control Register */
- tctl = E1000_READ_REG(&adapter->hw, TCTL);
+ tctl = E1000_READ_REG(hw, TCTL);
tctl &= ~E1000_TCTL_CT;
- tctl |= E1000_TCTL_EN | E1000_TCTL_PSP |
+ tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
- E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
+ E1000_WRITE_REG(hw, TCTL, tctl);
- e1000_config_collision_dist(&adapter->hw);
+ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
+ tarc = E1000_READ_REG(hw, TARC0);
+ tarc |= ((1 << 25) | (1 << 21));
+ E1000_WRITE_REG(hw, TARC0, tarc);
+ tarc = E1000_READ_REG(hw, TARC1);
+ tarc |= (1 << 25);
+ if (tctl & E1000_TCTL_MULR)
+ tarc &= ~(1 << 28);
+ else
+ tarc |= (1 << 28);
+ E1000_WRITE_REG(hw, TARC1, tarc);
+ }
+
+ e1000_config_collision_dist(hw);
/* Setup Transmit Descriptor Settings for eop descriptor */
adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
E1000_TXD_CMD_IFCS;
- if(adapter->hw.mac_type < e1000_82543)
+ if (hw->mac_type < e1000_82543)
adapter->txd_cmd |= E1000_TXD_CMD_RPS;
else
adapter->txd_cmd |= E1000_TXD_CMD_RS;
/* Cache if we're 82544 running in PCI-X because we'll
* need this to apply a workaround later in the send path. */
- if(adapter->hw.mac_type == e1000_82544 &&
- adapter->hw.bus_type == e1000_bus_type_pcix)
+ if (hw->mac_type == e1000_82544 &&
+ hw->bus_type == e1000_bus_type_pcix)
adapter->pcix_82544 = 1;
}
/**
* e1000_setup_rx_resources - allocate Rx resources (Descriptors)
* @adapter: board private structure
+ * @rxdr: rx descriptor ring (for a specific queue) to setup
*
* Returns 0 on success, negative on failure
**/
int
-e1000_setup_rx_resources(struct e1000_adapter *adapter)
+e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr)
{
- struct e1000_desc_ring *rxdr = &adapter->rx_ring;
struct pci_dev *pdev = adapter->pdev;
int size, desc_len;
size = sizeof(struct e1000_buffer) * rxdr->count;
- rxdr->buffer_info = vmalloc(size);
- if(!rxdr->buffer_info) {
+ rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+ if (!rxdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the receive descriptor ring\n");
return -ENOMEM;
@@ -1156,13 +1408,13 @@
rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
- if(!rxdr->desc) {
+ if (!rxdr->desc) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
setup_rx_desc_die:
vfree(rxdr->buffer_info);
kfree(rxdr->ps_page);
kfree(rxdr->ps_page_dma);
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the receive descriptor ring\n");
return -ENOMEM;
}
@@ -1174,9 +1426,12 @@
"at %p\n", rxdr->size, rxdr->desc);
/* Try again, without freeing the previous */
rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
- if(!rxdr->desc) {
/* Failed allocation, critical failure */
+ if (!rxdr->desc) {
pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory "
+ "for the receive descriptor ring\n");
goto setup_rx_desc_die;
}
@@ -1188,10 +1443,7 @@
DPRINTK(PROBE, ERR,
"Unable to allocate aligned memory "
"for the receive descriptor ring\n");
- vfree(rxdr->buffer_info);
- kfree(rxdr->ps_page);
- kfree(rxdr->ps_page_dma);
- return -ENOMEM;
+ goto setup_rx_desc_die;
} else {
/* Free old allocation, new allocation was successful */
pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
@@ -1206,15 +1458,48 @@
}
/**
+ * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not). It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int
+e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_queues; i++) {
+ err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Rx Queue %u failed\n", i);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
* e1000_setup_rctl - configure the receive control registers
* @adapter: Board private structure
**/
-
+#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
+ (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
static void
e1000_setup_rctl(struct e1000_adapter *adapter)
{
uint32_t rctl, rfctl;
uint32_t psrctl = 0;
+#ifdef CONFIG_E1000_PACKET_SPLIT
+ uint32_t pages = 0;
+#endif
rctl = E1000_READ_REG(&adapter->hw, RCTL);
@@ -1235,7 +1520,7 @@
rctl |= E1000_RCTL_LPE;
/* Setup buffer sizes */
- if(adapter->hw.mac_type == e1000_82573) {
+ if(adapter->hw.mac_type >= e1000_82571) {
/* We can now specify buffers in 1K increments.
* BSIZE and BSEX are ignored in this case. */
rctl |= adapter->rx_buffer_len << 0x11;
@@ -1268,11 +1553,14 @@
* followed by the page buffers. Therefore, skb->data is
* sized to hold the largest protocol header.
*/
- adapter->rx_ps = (adapter->hw.mac_type > e1000_82547_rev_2)
- && (adapter->netdev->mtu
- < ((3 * PAGE_SIZE) + adapter->rx_ps_bsize0));
+ pages = PAGE_USE_COUNT(adapter->netdev->mtu);
+ if ((adapter->hw.mac_type > e1000_82547_rev_2) && (pages <= 3) &&
+ PAGE_SIZE <= 16384)
+ adapter->rx_ps_pages = pages;
+ else
+ adapter->rx_ps_pages = 0;
#endif
- if(adapter->rx_ps) {
+ if (adapter->rx_ps_pages) {
/* Configure extra packet-split registers */
rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
rfctl |= E1000_RFCTL_EXTEN;
@@ -1284,12 +1572,19 @@
psrctl |= adapter->rx_ps_bsize0 >>
E1000_PSRCTL_BSIZE0_SHIFT;
- psrctl |= PAGE_SIZE >>
- E1000_PSRCTL_BSIZE1_SHIFT;
- psrctl |= PAGE_SIZE <<
- E1000_PSRCTL_BSIZE2_SHIFT;
- psrctl |= PAGE_SIZE <<
- E1000_PSRCTL_BSIZE3_SHIFT;
+
+ switch (adapter->rx_ps_pages) {
+ case 3:
+ psrctl |= PAGE_SIZE <<
+ E1000_PSRCTL_BSIZE3_SHIFT;
+ case 2:
+ psrctl |= PAGE_SIZE <<
+ E1000_PSRCTL_BSIZE2_SHIFT;
+ case 1:
+ psrctl |= PAGE_SIZE >>
+ E1000_PSRCTL_BSIZE1_SHIFT;
+ break;
+ }
E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
}
@@ -1307,91 +1602,181 @@
static void
e1000_configure_rx(struct e1000_adapter *adapter)
{
- uint64_t rdba = adapter->rx_ring.dma;
- uint32_t rdlen, rctl, rxcsum;
+ uint64_t rdba;
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t rdlen, rctl, rxcsum, ctrl_ext;
+#ifdef CONFIG_E1000_MQ
+ uint32_t reta, mrqc;
+ int i;
+#endif
- if(adapter->rx_ps) {
- rdlen = adapter->rx_ring.count *
+ if (adapter->rx_ps_pages) {
+ rdlen = adapter->rx_ring[0].count *
sizeof(union e1000_rx_desc_packet_split);
adapter->clean_rx = e1000_clean_rx_irq_ps;
adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
} else {
- rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc);
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
adapter->clean_rx = e1000_clean_rx_irq;
adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
}
/* disable receives while setting up the descriptors */
- rctl = E1000_READ_REG(&adapter->hw, RCTL);
- E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN);
+ rctl = E1000_READ_REG(hw, RCTL);
+ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
/* set the Receive Delay Timer Register */
- E1000_WRITE_REG(&adapter->hw, RDTR, adapter->rx_int_delay);
+ E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
- if(adapter->hw.mac_type >= e1000_82540) {
- E1000_WRITE_REG(&adapter->hw, RADV, adapter->rx_abs_int_delay);
+ if (hw->mac_type >= e1000_82540) {
+ E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
if(adapter->itr > 1)
- E1000_WRITE_REG(&adapter->hw, ITR,
+ E1000_WRITE_REG(hw, ITR,
1000000000 / (adapter->itr * 256));
}
- /* Setup the Base and Length of the Rx Descriptor Ring */
- E1000_WRITE_REG(&adapter->hw, RDBAL, (rdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(&adapter->hw, RDBAH, (rdba >> 32));
+ if (hw->mac_type >= e1000_82571) {
+ /* Reset delay timers after every interrupt */
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_CANC;
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH(hw);
+ }
- E1000_WRITE_REG(&adapter->hw, RDLEN, rdlen);
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ switch (adapter->num_queues) {
+#ifdef CONFIG_E1000_MQ
+ case 2:
+ rdba = adapter->rx_ring[1].dma;
+ E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, RDBAH1, (rdba >> 32));
+ E1000_WRITE_REG(hw, RDLEN1, rdlen);
+ E1000_WRITE_REG(hw, RDH1, 0);
+ E1000_WRITE_REG(hw, RDT1, 0);
+ adapter->rx_ring[1].rdh = E1000_RDH1;
+ adapter->rx_ring[1].rdt = E1000_RDT1;
+ /* Fall Through */
+#endif
+ case 1:
+ default:
+ rdba = adapter->rx_ring[0].dma;
+ E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
+ E1000_WRITE_REG(hw, RDLEN, rdlen);
+ E1000_WRITE_REG(hw, RDH, 0);
+ E1000_WRITE_REG(hw, RDT, 0);
+ adapter->rx_ring[0].rdh = E1000_RDH;
+ adapter->rx_ring[0].rdt = E1000_RDT;
+ break;
+ }
- /* Setup the HW Rx Head and Tail Descriptor Pointers */
- E1000_WRITE_REG(&adapter->hw, RDH, 0);
- E1000_WRITE_REG(&adapter->hw, RDT, 0);
+#ifdef CONFIG_E1000_MQ
+ if (adapter->num_queues > 1) {
+ uint32_t random[10];
+
+ get_random_bytes(&random[0], 40);
+
+ if (hw->mac_type <= e1000_82572) {
+ E1000_WRITE_REG(hw, RSSIR, 0);
+ E1000_WRITE_REG(hw, RSSIM, 0);
+ }
+
+ switch (adapter->num_queues) {
+ case 2:
+ default:
+ reta = 0x00800080;
+ mrqc = E1000_MRQC_ENABLE_RSS_2Q;
+ break;
+ }
+
+ /* Fill out redirection table */
+ for (i = 0; i < 32; i++)
+ E1000_WRITE_REG_ARRAY(hw, RETA, i, reta);
+ /* Fill out hash function seeds */
+ for (i = 0; i < 10; i++)
+ E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]);
+
+ mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP);
+ E1000_WRITE_REG(hw, MRQC, mrqc);
+ }
+
+ /* Multiqueue and packet checksumming are mutually exclusive. */
+ if (hw->mac_type >= e1000_82571) {
+ rxcsum = E1000_READ_REG(hw, RXCSUM);
+ rxcsum |= E1000_RXCSUM_PCSD;
+ E1000_WRITE_REG(hw, RXCSUM, rxcsum);
+ }
+
+#else
/* Enable 82543 Receive Checksum Offload for TCP and UDP */
- if(adapter->hw.mac_type >= e1000_82543) {
- rxcsum = E1000_READ_REG(&adapter->hw, RXCSUM);
+ if (hw->mac_type >= e1000_82543) {
+ rxcsum = E1000_READ_REG(hw, RXCSUM);
if(adapter->rx_csum == TRUE) {
rxcsum |= E1000_RXCSUM_TUOFL;
- /* Enable 82573 IPv4 payload checksum for UDP fragments
+ /* Enable 82571 IPv4 payload checksum for UDP fragments
* Must be used in conjunction with packet-split. */
- if((adapter->hw.mac_type > e1000_82547_rev_2) &&
- (adapter->rx_ps)) {
+ if ((hw->mac_type >= e1000_82571) &&
+ (adapter->rx_ps_pages)) {
rxcsum |= E1000_RXCSUM_IPPCSE;
}
} else {
rxcsum &= ~E1000_RXCSUM_TUOFL;
/* don't need to clear IPPCSE as it defaults to 0 */
}
- E1000_WRITE_REG(&adapter->hw, RXCSUM, rxcsum);
+ E1000_WRITE_REG(hw, RXCSUM, rxcsum);
}
+#endif /* CONFIG_E1000_MQ */
- if (adapter->hw.mac_type == e1000_82573)
- E1000_WRITE_REG(&adapter->hw, ERT, 0x0100);
+ if (hw->mac_type == e1000_82573)
+ E1000_WRITE_REG(hw, ERT, 0x0100);
/* Enable Receives */
- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ E1000_WRITE_REG(hw, RCTL, rctl);
}
/**
- * e1000_free_tx_resources - Free Tx Resources
+ * e1000_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+
+void
+e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_tx_resources - Free Tx Resources for All Queues
* @adapter: board private structure
*
* Free all transmit software resources
**/
void
-e1000_free_tx_resources(struct e1000_adapter *adapter)
+e1000_free_all_tx_resources(struct e1000_adapter *adapter)
{
- struct pci_dev *pdev = adapter->pdev;
+ int i;
- e1000_clean_tx_ring(adapter);
-
- vfree(adapter->tx_ring.buffer_info);
- adapter->tx_ring.buffer_info = NULL;
-
- pci_free_consistent(pdev, adapter->tx_ring.size,
- adapter->tx_ring.desc, adapter->tx_ring.dma);
-
- adapter->tx_ring.desc = NULL;
+ for (i = 0; i < adapter->num_queues; i++)
+ e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
}
static inline void
@@ -1414,21 +1799,22 @@
/**
* e1000_clean_tx_ring - Free Tx Buffers
* @adapter: board private structure
+ * @tx_ring: ring to be cleaned
**/
static void
-e1000_clean_tx_ring(struct e1000_adapter *adapter)
+e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
{
- struct e1000_desc_ring *tx_ring = &adapter->tx_ring;
struct e1000_buffer *buffer_info;
unsigned long size;
unsigned int i;
/* Free all the Tx ring sk_buffs */
- if (likely(adapter->previous_buffer_info.skb != NULL)) {
+ if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
e1000_unmap_and_free_tx_resource(adapter,
- &adapter->previous_buffer_info);
+ &tx_ring->previous_buffer_info);
}
for(i = 0; i < tx_ring->count; i++) {
@@ -1446,24 +1832,39 @@
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
- E1000_WRITE_REG(&adapter->hw, TDH, 0);
- E1000_WRITE_REG(&adapter->hw, TDT, 0);
+ writel(0, adapter->hw.hw_addr + tx_ring->tdh);
+ writel(0, adapter->hw.hw_addr + tx_ring->tdt);
+}
+
+/**
+ * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void
+e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_queues; i++)
+ e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
}
/**
* e1000_free_rx_resources - Free Rx Resources
* @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
*
* Free all receive software resources
**/
void
-e1000_free_rx_resources(struct e1000_adapter *adapter)
+e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
{
- struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
struct pci_dev *pdev = adapter->pdev;
- e1000_clean_rx_ring(adapter);
+ e1000_clean_rx_ring(adapter, rx_ring);
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
@@ -1478,14 +1879,31 @@
}
/**
- * e1000_clean_rx_ring - Free Rx Buffers
+ * e1000_free_all_rx_resources - Free Rx Resources for All Queues
* @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void
+e1000_free_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_queues; i++)
+ e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
**/
static void
-e1000_clean_rx_ring(struct e1000_adapter *adapter)
+e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
{
- struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
struct e1000_buffer *buffer_info;
struct e1000_ps_page *ps_page;
struct e1000_ps_page_dma *ps_page_dma;
@@ -1508,7 +1926,7 @@
dev_kfree_skb(buffer_info->skb);
buffer_info->skb = NULL;
- for(j = 0; j < PS_PAGE_BUFFERS; j++) {
+ for(j = 0; j < adapter->rx_ps_pages; j++) {
if(!ps_page->ps_page[j]) break;
pci_unmap_single(pdev,
ps_page_dma->ps_page_dma[j],
@@ -1534,8 +1952,22 @@
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
- E1000_WRITE_REG(&adapter->hw, RDH, 0);
- E1000_WRITE_REG(&adapter->hw, RDT, 0);
+ writel(0, adapter->hw.hw_addr + rx_ring->rdh);
+ writel(0, adapter->hw.hw_addr + rx_ring->rdt);
+}
+
+/**
+ * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void
+e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_queues; i++)
+ e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
}
/* The 82542 2.0 (revision 2) needs to have the receive unit in reset
@@ -1556,7 +1988,7 @@
mdelay(5);
if(netif_running(netdev))
- e1000_clean_rx_ring(adapter);
+ e1000_clean_all_rx_rings(adapter);
}
static void
@@ -1576,7 +2008,7 @@
if(netif_running(netdev)) {
e1000_configure_rx(adapter);
- e1000_alloc_rx_buffers(adapter);
+ e1000_alloc_rx_buffers(adapter, &adapter->rx_ring[0]);
}
}
@@ -1607,6 +2039,22 @@
e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
+ /* With 82571 controllers, LAA may be overwritten (with the default)
+ * due to controller reset from the other port. */
+ if (adapter->hw.mac_type == e1000_82571) {
+ /* activate the work around */
+ adapter->hw.laa_is_present = 1;
+
+ /* Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * gets fixed (in e1000_watchdog), the actual LAA is in one
+ * of the RARs and no incoming packets directed to this port
+ * are dropped. Eventaully the LAA will be in RAR[0] and
+ * RAR[14] */
+ e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
+ E1000_RAR_ENTRIES - 1);
+ }
+
if(adapter->hw.mac_type == e1000_82542_rev2_0)
e1000_leave_82542_rst(adapter);
@@ -1629,12 +2077,13 @@
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
struct dev_mc_list *mc_ptr;
- unsigned long flags;
uint32_t rctl;
uint32_t hash_value;
- int i;
+ int i, rar_entries = E1000_RAR_ENTRIES;
- spin_lock_irqsave(&adapter->tx_lock, flags);
+ /* reserve RAR[14] for LAA over-write work-around */
+ if (adapter->hw.mac_type == e1000_82571)
+ rar_entries--;
/* Check for Promiscuous and All Multicast modes */
@@ -1659,11 +2108,12 @@
/* load the first 14 multicast address into the exact filters 1-14
* RAR 0 is used for the station MAC adddress
* if there are not 14 addresses, go ahead and clear the filters
+ * -- with 82571 controllers only 0-13 entries are filled here
*/
mc_ptr = netdev->mc_list;
- for(i = 1; i < E1000_RAR_ENTRIES; i++) {
- if(mc_ptr) {
+ for(i = 1; i < rar_entries; i++) {
+ if (mc_ptr) {
e1000_rar_set(hw, mc_ptr->dmi_addr, i);
mc_ptr = mc_ptr->next;
} else {
@@ -1686,8 +2136,6 @@
if(hw->mac_type == e1000_82542_rev2_0)
e1000_leave_82542_rst(adapter);
-
- spin_unlock_irqrestore(&adapter->tx_lock, flags);
}
/* Need to wait a few seconds after link up to get diagnostic information from
@@ -1759,7 +2207,7 @@
e1000_watchdog_task(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- struct e1000_desc_ring *txdr = &adapter->tx_ring;
+ struct e1000_tx_ring *txdr = &adapter->tx_ring[0];
uint32_t link;
e1000_check_for_link(&adapter->hw);
@@ -1818,8 +2266,8 @@
e1000_update_adaptive(&adapter->hw);
- if(!netif_carrier_ok(netdev)) {
- if(E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ if (adapter->num_queues == 1 && !netif_carrier_ok(netdev)) {
+ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
/* We've lost link, so the controller stops DMA,
* but we've got queued Tx work that's never going
* to get done, so reset controller to flush Tx.
@@ -1847,6 +2295,11 @@
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = TRUE;
+ /* With 82571 controllers, LAA may be overwritten due to controller
+ * reset from the other port. Set the appropriate LAA in RAR[0] */
+ if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
+ e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
+
/* Reset the timer */
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
}
@@ -1859,7 +2312,8 @@
#define E1000_TX_FLAGS_VLAN_SHIFT 16
static inline int
-e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb)
+e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb)
{
#ifdef NETIF_F_TSO
struct e1000_context_desc *context_desc;
@@ -1910,8 +2364,8 @@
cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
- i = adapter->tx_ring.next_to_use;
- context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i);
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
context_desc->lower_setup.ip_fields.ipcss = ipcss;
context_desc->lower_setup.ip_fields.ipcso = ipcso;
@@ -1923,8 +2377,8 @@
context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
context_desc->cmd_and_length = cpu_to_le32(cmd_length);
- if(++i == adapter->tx_ring.count) i = 0;
- adapter->tx_ring.next_to_use = i;
+ if (++i == tx_ring->count) i = 0;
+ tx_ring->next_to_use = i;
return 1;
}
@@ -1934,7 +2388,8 @@
}
static inline boolean_t
-e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
+e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb)
{
struct e1000_context_desc *context_desc;
unsigned int i;
@@ -1943,8 +2398,8 @@
if(likely(skb->ip_summed == CHECKSUM_HW)) {
css = skb->h.raw - skb->data;
- i = adapter->tx_ring.next_to_use;
- context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i);
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
context_desc->upper_setup.tcp_fields.tucss = css;
context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
@@ -1952,8 +2407,8 @@
context_desc->tcp_seg_setup.data = 0;
context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
- if(unlikely(++i == adapter->tx_ring.count)) i = 0;
- adapter->tx_ring.next_to_use = i;
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ tx_ring->next_to_use = i;
return TRUE;
}
@@ -1965,11 +2420,10 @@
#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
static inline int
-e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb,
- unsigned int first, unsigned int max_per_txd,
- unsigned int nr_frags, unsigned int mss)
+e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
+ unsigned int nr_frags, unsigned int mss)
{
- struct e1000_desc_ring *tx_ring = &adapter->tx_ring;
struct e1000_buffer *buffer_info;
unsigned int len = skb->len;
unsigned int offset = 0, size, count = 0, i;
@@ -2065,9 +2519,9 @@
}
static inline void
-e1000_tx_queue(struct e1000_adapter *adapter, int count, int tx_flags)
+e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
+ int tx_flags, int count)
{
- struct e1000_desc_ring *tx_ring = &adapter->tx_ring;
struct e1000_tx_desc *tx_desc = NULL;
struct e1000_buffer *buffer_info;
uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
@@ -2113,7 +2567,7 @@
wmb();
tx_ring->next_to_use = i;
- E1000_WRITE_REG(&adapter->hw, TDT, i);
+ writel(i, adapter->hw.hw_addr + tx_ring->tdt);
}
/**
@@ -2206,6 +2660,7 @@
e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring;
unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
unsigned int tx_flags = 0;
@@ -2218,7 +2673,13 @@
unsigned int f;
len -= skb->data_len;
- if(unlikely(skb->len <= 0)) {
+#ifdef CONFIG_E1000_MQ
+ tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
+#else
+ tx_ring = adapter->tx_ring;
+#endif
+
+ if (unlikely(skb->len <= 0)) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
@@ -2262,21 +2723,42 @@
if(adapter->pcix_82544)
count += nr_frags;
- local_irq_save(flags);
- if (!spin_trylock(&adapter->tx_lock)) {
- /* Collision - tell upper layer to requeue */
- local_irq_restore(flags);
- return NETDEV_TX_LOCKED;
- }
+#ifdef NETIF_F_TSO
+ /* TSO Workaround for 82571/2 Controllers -- if skb->data
+ * points to just header, pull a few bytes of payload from
+ * frags into skb->data */
+ if (skb_shinfo(skb)->tso_size) {
+ uint8_t hdr_len;
+ hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
+ if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) &&
+ (adapter->hw.mac_type == e1000_82571 ||
+ adapter->hw.mac_type == e1000_82572)) {
+ unsigned int pull_size;
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ printk(KERN_ERR "__pskb_pull_tail failed.\n");
+ dev_kfree_skb_any(skb);
+ return -EFAULT;
+ }
+ }
+ }
+#endif
+
if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) )
e1000_transfer_dhcp_info(adapter, skb);
+ local_irq_save(flags);
+ if (!spin_trylock(&tx_ring->tx_lock)) {
+ /* Collision - tell upper layer to requeue */
+ local_irq_restore(flags);
+ return NETDEV_TX_LOCKED;
+ }
/* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time */
- if(unlikely(E1000_DESC_UNUSED(&adapter->tx_ring) < count + 2)) {
+ if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 2)) {
netif_stop_queue(netdev);
- spin_unlock_irqrestore(&adapter->tx_lock, flags);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_BUSY;
}
@@ -2284,7 +2766,7 @@
if(unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
netif_stop_queue(netdev);
mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
- spin_unlock_irqrestore(&adapter->tx_lock, flags);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_BUSY;
}
}
@@ -2294,37 +2776,37 @@
tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
}
- first = adapter->tx_ring.next_to_use;
+ first = tx_ring->next_to_use;
- tso = e1000_tso(adapter, skb);
+ tso = e1000_tso(adapter, tx_ring, skb);
if (tso < 0) {
dev_kfree_skb_any(skb);
- spin_unlock_irqrestore(&adapter->tx_lock, flags);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_OK;
}
if (likely(tso))
tx_flags |= E1000_TX_FLAGS_TSO;
- else if(likely(e1000_tx_csum(adapter, skb)))
+ else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
tx_flags |= E1000_TX_FLAGS_CSUM;
/* Old method was to assume IPv4 packet by default if TSO was enabled.
- * 82573 hardware supports TSO capabilities for IPv6 as well...
+ * 82571 hardware supports TSO capabilities for IPv6 as well...
* no longer assume, we must. */
- if(likely(skb->protocol == ntohs(ETH_P_IP)))
+ if (likely(skb->protocol == ntohs(ETH_P_IP)))
tx_flags |= E1000_TX_FLAGS_IPV4;
- e1000_tx_queue(adapter,
- e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss),
- tx_flags);
+ e1000_tx_queue(adapter, tx_ring, tx_flags,
+ e1000_tx_map(adapter, tx_ring, skb, first,
+ max_per_txd, nr_frags, mss));
netdev->trans_start = jiffies;
/* Make sure there is space in the ring for the next send. */
- if(unlikely(E1000_DESC_UNUSED(&adapter->tx_ring) < MAX_SKB_FRAGS + 2))
+ if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 2))
netif_stop_queue(netdev);
- spin_unlock_irqrestore(&adapter->tx_lock, flags);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_OK;
}
@@ -2388,9 +2870,18 @@
return -EINVAL;
}
-#define MAX_STD_JUMBO_FRAME_SIZE 9216
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
/* might want this to be bigger enum check... */
- if (adapter->hw.mac_type == e1000_82573 &&
+ /* 82571 controllers limit jumbo frame size to 10500 bytes */
+ if ((adapter->hw.mac_type == e1000_82571 ||
+ adapter->hw.mac_type == e1000_82572) &&
+ max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR, "MTU > 9216 bytes not supported "
+ "on 82571 and 82572 controllers.\n");
+ return -EINVAL;
+ }
+
+ if(adapter->hw.mac_type == e1000_82573 &&
max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
"on 82573\n");
@@ -2578,6 +3069,29 @@
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
+#ifdef CONFIG_E1000_MQ
+void
+e1000_rx_schedule(void *data)
+{
+ struct net_device *poll_dev, *netdev = data;
+ struct e1000_adapter *adapter = netdev->priv;
+ int this_cpu = get_cpu();
+
+ poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu);
+ if (poll_dev == NULL) {
+ put_cpu();
+ return;
+ }
+
+ if (likely(netif_rx_schedule_prep(poll_dev)))
+ __netif_rx_schedule(poll_dev);
+ else
+ e1000_irq_enable(adapter);
+
+ put_cpu();
+}
+#endif
+
/**
* e1000_intr - Interrupt Handler
* @irq: interrupt number
@@ -2592,8 +3106,8 @@
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
uint32_t icr = E1000_READ_REG(hw, ICR);
-#ifndef CONFIG_E1000_NAPI
- unsigned int i;
+#if defined(CONFIG_E1000_NAPI) && defined(CONFIG_E1000_MQ) || !defined(CONFIG_E1000_NAPI)
+ int i;
#endif
if(unlikely(!icr))
@@ -2605,17 +3119,31 @@
}
#ifdef CONFIG_E1000_NAPI
- if(likely(netif_rx_schedule_prep(netdev))) {
-
- /* Disable interrupts and register for poll. The flush
- of the posted write is intentionally left out.
- */
-
- atomic_inc(&adapter->irq_sem);
- E1000_WRITE_REG(hw, IMC, ~0);
- __netif_rx_schedule(netdev);
+ atomic_inc(&adapter->irq_sem);
+ E1000_WRITE_REG(hw, IMC, ~0);
+ E1000_WRITE_FLUSH(hw);
+#ifdef CONFIG_E1000_MQ
+ if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
+ cpu_set(adapter->cpu_for_queue[0],
+ adapter->rx_sched_call_data.cpumask);
+ for (i = 1; i < adapter->num_queues; i++) {
+ cpu_set(adapter->cpu_for_queue[i],
+ adapter->rx_sched_call_data.cpumask);
+ atomic_inc(&adapter->irq_sem);
+ }
+ atomic_set(&adapter->rx_sched_call_data.count, i);
+ smp_call_async_mask(&adapter->rx_sched_call_data);
+ } else {
+ printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count));
}
-#else
+#else /* if !CONFIG_E1000_MQ */
+ if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0])))
+ __netif_rx_schedule(&adapter->polling_netdev[0]);
+ else
+ e1000_irq_enable(adapter);
+#endif /* CONFIG_E1000_MQ */
+
+#else /* if !CONFIG_E1000_NAPI */
/* Writing IMC and IMS is needed for 82547.
Due to Hub Link bus being occupied, an interrupt
de-assertion message is not able to be sent.
@@ -2632,13 +3160,14 @@
}
for(i = 0; i < E1000_MAX_INTR; i++)
- if(unlikely(!adapter->clean_rx(adapter) &
- !e1000_clean_tx_irq(adapter)))
+ if(unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
+ !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
e1000_irq_enable(adapter);
-#endif
+
+#endif /* CONFIG_E1000_NAPI */
return IRQ_HANDLED;
}
@@ -2650,22 +3179,37 @@
**/
static int
-e1000_clean(struct net_device *netdev, int *budget)
+e1000_clean(struct net_device *poll_dev, int *budget)
{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- int work_to_do = min(*budget, netdev->quota);
- int tx_cleaned;
- int work_done = 0;
+ struct e1000_adapter *adapter;
+ int work_to_do = min(*budget, poll_dev->quota);
+ int tx_cleaned, i = 0, work_done = 0;
- tx_cleaned = e1000_clean_tx_irq(adapter);
- adapter->clean_rx(adapter, &work_done, work_to_do);
+ /* Must NOT use netdev_priv macro here. */
+ adapter = poll_dev->priv;
+
+ /* Keep link state information with original netdev */
+ if (!netif_carrier_ok(adapter->netdev))
+ goto quit_polling;
+
+ while (poll_dev != &adapter->polling_netdev[i]) {
+ i++;
+ if (unlikely(i == adapter->num_queues))
+ BUG();
+ }
+
+ tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[i]);
+ adapter->clean_rx(adapter, &adapter->rx_ring[i],
+ &work_done, work_to_do);
*budget -= work_done;
- netdev->quota -= work_done;
+ poll_dev->quota -= work_done;
- if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) {
/* If no Tx and not enough Rx work done, exit the polling mode */
- netif_rx_complete(netdev);
+ if((!tx_cleaned && (work_done == 0)) ||
+ !netif_running(adapter->netdev)) {
+quit_polling:
+ netif_rx_complete(poll_dev);
e1000_irq_enable(adapter);
return 0;
}
@@ -2680,9 +3224,9 @@
**/
static boolean_t
-e1000_clean_tx_irq(struct e1000_adapter *adapter)
+e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
{
- struct e1000_desc_ring *tx_ring = &adapter->tx_ring;
struct net_device *netdev = adapter->netdev;
struct e1000_tx_desc *tx_desc, *eop_desc;
struct e1000_buffer *buffer_info;
@@ -2693,12 +3237,12 @@
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
- while(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
+ while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
/* Premature writeback of Tx descriptors clear (free buffers
* and unmap pci_mapping) previous_buffer_info */
- if (likely(adapter->previous_buffer_info.skb != NULL)) {
+ if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
e1000_unmap_and_free_tx_resource(adapter,
- &adapter->previous_buffer_info);
+ &tx_ring->previous_buffer_info);
}
for(cleaned = FALSE; !cleaned; ) {
@@ -2714,7 +3258,7 @@
#ifdef NETIF_F_TSO
} else {
if (cleaned) {
- memcpy(&adapter->previous_buffer_info,
+ memcpy(&tx_ring->previous_buffer_info,
buffer_info,
sizeof(struct e1000_buffer));
memset(buffer_info, 0,
@@ -2732,6 +3276,8 @@
if(unlikely(++i == tx_ring->count)) i = 0;
}
+
+ tx_ring->pkt++;
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
@@ -2739,15 +3285,15 @@
tx_ring->next_to_clean = i;
- spin_lock(&adapter->tx_lock);
+ spin_lock(&tx_ring->tx_lock);
if(unlikely(cleaned && netif_queue_stopped(netdev) &&
netif_carrier_ok(netdev)))
netif_wake_queue(netdev);
- spin_unlock(&adapter->tx_lock);
- if(adapter->detect_tx_hung) {
+ spin_unlock(&tx_ring->tx_lock);
+ if (adapter->detect_tx_hung) {
/* Detect a transmit hang in hardware, this serializes the
* check with the clearing of time_stamp and movement of i */
adapter->detect_tx_hung = FALSE;
@@ -2771,8 +3317,8 @@
" next_to_watch <%x>\n"
" jiffies <%lx>\n"
" next_to_watch.status <%x>\n",
- E1000_READ_REG(&adapter->hw, TDH),
- E1000_READ_REG(&adapter->hw, TDT),
+ readl(adapter->hw.hw_addr + tx_ring->tdh),
+ readl(adapter->hw.hw_addr + tx_ring->tdt),
tx_ring->next_to_use,
i,
(unsigned long long)tx_ring->buffer_info[i].dma,
@@ -2784,12 +3330,10 @@
}
}
#ifdef NETIF_F_TSO
-
- if( unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
- time_after(jiffies, adapter->previous_buffer_info.time_stamp + HZ)))
+ if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ)))
e1000_unmap_and_free_tx_resource(
- adapter, &adapter->previous_buffer_info);
-
+ adapter, &tx_ring->previous_buffer_info);
#endif
return cleaned;
}
@@ -2852,13 +3396,14 @@
static boolean_t
#ifdef CONFIG_E1000_NAPI
-e1000_clean_rx_irq(struct e1000_adapter *adapter, int *work_done,
- int work_to_do)
+e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
#else
-e1000_clean_rx_irq(struct e1000_adapter *adapter)
+e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
#endif
{
- struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
struct e1000_rx_desc *rx_desc;
@@ -2944,6 +3489,7 @@
}
#endif /* CONFIG_E1000_NAPI */
netdev->last_rx = jiffies;
+ rx_ring->pkt++;
next_desc:
rx_desc->status = 0;
@@ -2953,7 +3499,7 @@
rx_desc = E1000_RX_DESC(*rx_ring, i);
}
rx_ring->next_to_clean = i;
- adapter->alloc_rx_buf(adapter);
+ adapter->alloc_rx_buf(adapter, rx_ring);
return cleaned;
}
@@ -2965,13 +3511,14 @@
static boolean_t
#ifdef CONFIG_E1000_NAPI
-e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done,
- int work_to_do)
+e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
#else
-e1000_clean_rx_irq_ps(struct e1000_adapter *adapter)
+e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
#endif
{
- struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
union e1000_rx_desc_packet_split *rx_desc;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
@@ -3027,7 +3574,7 @@
/* Good Receive */
skb_put(skb, length);
- for(j = 0; j < PS_PAGE_BUFFERS; j++) {
+ for(j = 0; j < adapter->rx_ps_pages; j++) {
if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j])))
break;
@@ -3048,11 +3595,13 @@
rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
skb->protocol = eth_type_trans(skb, netdev);
-#ifdef HAVE_RX_ZERO_COPY
if(likely(rx_desc->wb.upper.header_status &
- E1000_RXDPS_HDRSTAT_HDRSP))
+ E1000_RXDPS_HDRSTAT_HDRSP)) {
+ adapter->rx_hdr_split++;
+#ifdef HAVE_RX_ZERO_COPY
skb_shinfo(skb)->zero_copy = TRUE;
#endif
+ }
#ifdef CONFIG_E1000_NAPI
if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
@@ -3071,6 +3620,7 @@
}
#endif /* CONFIG_E1000_NAPI */
netdev->last_rx = jiffies;
+ rx_ring->pkt++;
next_desc:
rx_desc->wb.middle.status_error &= ~0xFF;
@@ -3081,7 +3631,7 @@
staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
}
rx_ring->next_to_clean = i;
- adapter->alloc_rx_buf(adapter);
+ adapter->alloc_rx_buf(adapter, rx_ring);
return cleaned;
}
@@ -3092,9 +3642,9 @@
**/
static void
-e1000_alloc_rx_buffers(struct e1000_adapter *adapter)
+e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
{
- struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
struct e1000_rx_desc *rx_desc;
@@ -3178,7 +3728,7 @@
* applicable for weak-ordered memory model archs,
* such as IA-64). */
wmb();
- E1000_WRITE_REG(&adapter->hw, RDT, i);
+ writel(i, adapter->hw.hw_addr + rx_ring->rdt);
}
if(unlikely(++i == rx_ring->count)) i = 0;
@@ -3194,9 +3744,9 @@
**/
static void
-e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter)
+e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
{
- struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
union e1000_rx_desc_packet_split *rx_desc;
@@ -3215,22 +3765,26 @@
rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
for(j = 0; j < PS_PAGE_BUFFERS; j++) {
- if(unlikely(!ps_page->ps_page[j])) {
- ps_page->ps_page[j] =
- alloc_page(GFP_ATOMIC);
- if(unlikely(!ps_page->ps_page[j]))
- goto no_buffers;
- ps_page_dma->ps_page_dma[j] =
- pci_map_page(pdev,
- ps_page->ps_page[j],
- 0, PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- }
- /* Refresh the desc even if buffer_addrs didn't
- * change because each write-back erases this info.
- */
- rx_desc->read.buffer_addr[j+1] =
- cpu_to_le64(ps_page_dma->ps_page_dma[j]);
+ if (j < adapter->rx_ps_pages) {
+ if (likely(!ps_page->ps_page[j])) {
+ ps_page->ps_page[j] =
+ alloc_page(GFP_ATOMIC);
+ if (unlikely(!ps_page->ps_page[j]))
+ goto no_buffers;
+ ps_page_dma->ps_page_dma[j] =
+ pci_map_page(pdev,
+ ps_page->ps_page[j],
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ }
+ /* Refresh the desc even if buffer_addrs didn't
+ * change because each write-back erases
+ * this info.
+ */
+ rx_desc->read.buffer_addr[j+1] =
+ cpu_to_le64(ps_page_dma->ps_page_dma[j]);
+ } else
+ rx_desc->read.buffer_addr[j+1] = ~0;
}
skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN);
@@ -3264,7 +3818,7 @@
* descriptors are 32 bytes...so we increment tail
* twice as much.
*/
- E1000_WRITE_REG(&adapter->hw, RDT, i<<1);
+ writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
}
if(unlikely(++i == rx_ring->count)) i = 0;
@@ -3640,6 +4194,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int
e1000_suspend(struct pci_dev *pdev, pm_message_t state)
{
@@ -3715,6 +4270,12 @@
}
switch(adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+ break;
case e1000_82573:
swsm = E1000_READ_REG(&adapter->hw, SWSM);
E1000_WRITE_REG(&adapter->hw, SWSM,
@@ -3730,13 +4291,13 @@
return 0;
}
-#ifdef CONFIG_PM
static int
e1000_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
uint32_t manc, ret_val, swsm;
+ uint32_t ctrl_ext;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
@@ -3762,6 +4323,12 @@
}
switch(adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+ break;
case e1000_82573:
swsm = E1000_READ_REG(&adapter->hw, SWSM);
E1000_WRITE_REG(&adapter->hw, SWSM,
@@ -3786,7 +4353,7 @@
struct e1000_adapter *adapter = netdev_priv(netdev);
disable_irq(adapter->pdev->irq);
e1000_intr(adapter->pdev->irq, netdev, NULL);
- e1000_clean_tx_irq(adapter);
+ e1000_clean_tx_irq(adapter, adapter->tx_ring);
enable_irq(adapter->pdev->irq);
}
#endif
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 676247f..38695d5 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -306,7 +306,8 @@
.def = E1000_DEFAULT_TXD,
.arg = { .r = { .min = E1000_MIN_TXD }}
};
- struct e1000_desc_ring *tx_ring = &adapter->tx_ring;
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+ int i;
e1000_mac_type mac_type = adapter->hw.mac_type;
opt.arg.r.max = mac_type < e1000_82544 ?
E1000_MAX_TXD : E1000_MAX_82544_TXD;
@@ -319,6 +320,8 @@
} else {
tx_ring->count = opt.def;
}
+ for (i = 0; i < adapter->num_queues; i++)
+ tx_ring[i].count = tx_ring->count;
}
{ /* Receive Descriptor Count */
struct e1000_option opt = {
@@ -329,7 +332,8 @@
.def = E1000_DEFAULT_RXD,
.arg = { .r = { .min = E1000_MIN_RXD }}
};
- struct e1000_desc_ring *rx_ring = &adapter->rx_ring;
+ struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+ int i;
e1000_mac_type mac_type = adapter->hw.mac_type;
opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
E1000_MAX_82544_RXD;
@@ -342,6 +346,8 @@
} else {
rx_ring->count = opt.def;
}
+ for (i = 0; i < adapter->num_queues; i++)
+ rx_ring[i].count = rx_ring->count;
}
{ /* Checksum Offload Enable/Disable */
struct e1000_option opt = {
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index dcb3028..a806dfe 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -552,8 +552,7 @@
{
unsigned short int WS[32]=WakeupSeq;
- if (check_region(WakeupPort, 2)==0) {
-
+ if (request_region(WakeupPort, 2, "eepro wakeup")) {
if (net_debug>5)
printk(KERN_DEBUG "Waking UP\n");
@@ -563,7 +562,10 @@
outb_p(WS[i],WakeupPort);
if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]);
}
- } else printk(KERN_WARNING "Checkregion Failed!\n");
+
+ release_region(WakeupPort, 2);
+ } else
+ printk(KERN_WARNING "PnP wakeup region busy!\n");
}
#endif
@@ -705,7 +707,7 @@
dev->name, (unsigned)dev->base_addr);
break;
case LAN595FX:
- printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
+ printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
dev->name, (unsigned)dev->base_addr);
break;
case LAN595TX:
@@ -713,7 +715,7 @@
dev->name, (unsigned)dev->base_addr);
break;
case LAN595:
- printk("%s: Intel 82595-based lan card at %#x,",
+ printk("%s: Intel 82595-based lan card at %#x,",
dev->name, (unsigned)dev->base_addr);
}
@@ -726,7 +728,7 @@
if (dev->irq > 2)
printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]);
- else
+ else
printk(", %s.\n", ifmap[dev->if_port]);
if (net_debug > 3) {
@@ -756,7 +758,7 @@
int err;
/* Grab the region so we can find another board if autoIRQ fails. */
- if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) {
+ if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) {
if (!autoprobe)
printk(KERN_WARNING "EEPRO: io-port 0x%04x in use \n",
ioaddr);
@@ -838,15 +840,15 @@
/* Mask off INT number */
int count = lp->word[1] & 7;
unsigned irqMask = lp->word[7];
-
+
while (count--)
irqMask &= irqMask - 1;
-
+
count = ffs(irqMask);
-
+
if (count)
dev->irq = count - 1;
-
+
if (dev->irq < 2) {
printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n");
goto exit;
@@ -854,7 +856,7 @@
dev->irq = 9;
}
}
-
+
dev->open = eepro_open;
dev->stop = eepro_close;
dev->hard_start_xmit = eepro_send_packet;
@@ -863,7 +865,7 @@
dev->tx_timeout = eepro_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
dev->ethtool_ops = &eepro_ethtool_ops;
-
+
/* print boot time info */
eepro_print_info(dev);
@@ -1047,8 +1049,8 @@
/* Initialize the RCV and XMT upper and lower limits */
- outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG);
- outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG);
+ outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG);
+ outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG);
outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg);
outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg);
@@ -1065,12 +1067,12 @@
eepro_clear_int(ioaddr);
/* Initialize RCV */
- outw(lp->rcv_lower_limit, ioaddr + RCV_BAR);
+ outw(lp->rcv_lower_limit, ioaddr + RCV_BAR);
lp->rx_start = lp->rcv_lower_limit;
- outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP);
+ outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP);
/* Initialize XMT */
- outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar);
+ outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar);
lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
lp->tx_last = 0;
@@ -1411,7 +1413,7 @@
outb(0x08, ioaddr + STATUS_REG);
if (i & 0x20) { /* command ABORTed */
- printk(KERN_NOTICE "%s: multicast setup failed.\n",
+ printk(KERN_NOTICE "%s: multicast setup failed.\n",
dev->name);
break;
} else if ((i & 0x0f) == 0x03) { /* MC-Done */
@@ -1512,7 +1514,7 @@
end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */
- if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) {
+ if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) {
/* Arrrr!!!, must keep the xmt header together,
several days were lost to chase this one down. */
last = lp->xmt_lower_limit;
@@ -1643,7 +1645,7 @@
else if (rcv_status & 0x0800)
lp->stats.rx_crc_errors++;
- printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
+ printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size);
}
@@ -1674,10 +1676,10 @@
{
struct eepro_local *lp = netdev_priv(dev);
short ioaddr = dev->base_addr;
- short boguscount = 25;
+ short boguscount = 25;
short xmt_status;
- while ((lp->tx_start != lp->tx_end) && boguscount--) {
+ while ((lp->tx_start != lp->tx_end) && boguscount--) {
outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG);
xmt_status = inw(ioaddr+IO_PORT);
@@ -1723,7 +1725,7 @@
{
struct eepro_local *lp = (struct eepro_local *)dev->priv;
- cmd->supported = SUPPORTED_10baseT_Half |
+ cmd->supported = SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_Autoneg;
cmd->advertising = ADVERTISED_10baseT_Half |
@@ -1797,10 +1799,9 @@
MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver");
MODULE_LICENSE("GPL");
-static int num_params;
-module_param_array(io, int, &num_params, 0);
-module_param_array(irq, int, &num_params, 0);
-module_param_array(mem, int, &num_params, 0);
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 87f5227..f119ec4 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -1334,7 +1334,7 @@
static int epic_poll(struct net_device *dev, int *budget)
{
struct epic_private *ep = dev->priv;
- int work_done, orig_budget;
+ int work_done = 0, orig_budget;
long ioaddr = dev->base_addr;
orig_budget = (*budget > dev->quota) ? dev->quota : *budget;
@@ -1343,7 +1343,7 @@
epic_tx(dev, ep);
- work_done = epic_rx(dev, *budget);
+ work_done += epic_rx(dev, *budget);
epic_rx_err(dev, ep);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index d6eefdb..22aec6e 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -95,6 +95,8 @@
* of nv_remove
* 0.42: 06 Aug 2005: Fix lack of link speed initialization
* in the second (and later) nv_open call
+ * 0.43: 10 Aug 2005: Add support for tx checksum.
+ * 0.44: 20 Aug 2005: Add support for scatter gather and segmentation.
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
@@ -106,7 +108,7 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#define FORCEDETH_VERSION "0.41"
+#define FORCEDETH_VERSION "0.44"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
@@ -145,6 +147,7 @@
#define DEV_NEED_LINKTIMER 0x0002 /* poll link settings. Relies on the timer irq */
#define DEV_HAS_LARGEDESC 0x0004 /* device supports jumbo frames and needs packet format 2 */
#define DEV_HAS_HIGH_DMA 0x0008 /* device supports 64bit dma */
+#define DEV_HAS_CHECKSUM 0x0010 /* device supports tx and rx checksum offloads */
enum {
NvRegIrqStatus = 0x000,
@@ -241,6 +244,9 @@
#define NVREG_TXRXCTL_IDLE 0x0008
#define NVREG_TXRXCTL_RESET 0x0010
#define NVREG_TXRXCTL_RXCHECK 0x0400
+#define NVREG_TXRXCTL_DESC_1 0
+#define NVREG_TXRXCTL_DESC_2 0x02100
+#define NVREG_TXRXCTL_DESC_3 0x02200
NvRegMIIStatus = 0x180,
#define NVREG_MIISTAT_ERROR 0x0001
#define NVREG_MIISTAT_LINKCHANGE 0x0008
@@ -335,6 +341,10 @@
/* error and valid are the same for both */
#define NV_TX2_ERROR (1<<30)
#define NV_TX2_VALID (1<<31)
+#define NV_TX2_TSO (1<<28)
+#define NV_TX2_TSO_SHIFT 14
+#define NV_TX2_CHECKSUM_L3 (1<<27)
+#define NV_TX2_CHECKSUM_L4 (1<<26)
#define NV_RX_DESCRIPTORVALID (1<<16)
#define NV_RX_MISSEDFRAME (1<<17)
@@ -417,14 +427,14 @@
/*
* desc_ver values:
- * This field has two purposes:
- * - Newer nics uses a different ring layout. The layout is selected by
- * comparing np->desc_ver with DESC_VER_xy.
- * - It contains bits that are forced on when writing to NvRegTxRxControl.
+ * The nic supports three different descriptor types:
+ * - DESC_VER_1: Original
+ * - DESC_VER_2: support for jumbo frames.
+ * - DESC_VER_3: 64-bit format.
*/
-#define DESC_VER_1 0x0
-#define DESC_VER_2 (0x02100|NVREG_TXRXCTL_RXCHECK)
-#define DESC_VER_3 (0x02200|NVREG_TXRXCTL_RXCHECK)
+#define DESC_VER_1 1
+#define DESC_VER_2 2
+#define DESC_VER_3 3
/* PHY defines */
#define PHY_OUI_MARVELL 0x5043
@@ -491,6 +501,7 @@
u32 orig_mac[2];
u32 irqmask;
u32 desc_ver;
+ u32 txrxctl_bits;
void __iomem *base;
@@ -534,7 +545,7 @@
static inline u8 __iomem *get_hwbase(struct net_device *dev)
{
- return get_nvpriv(dev)->base;
+ return ((struct fe_priv *)netdev_priv(dev))->base;
}
static inline void pci_push(u8 __iomem *base)
@@ -623,7 +634,7 @@
static int phy_reset(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u32 miicontrol;
unsigned int tries = 0;
@@ -726,7 +737,7 @@
static void nv_start_rx(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
dprintk(KERN_DEBUG "%s: nv_start_rx\n", dev->name);
@@ -782,14 +793,14 @@
static void nv_txrx_reset(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
dprintk(KERN_DEBUG "%s: nv_txrx_reset\n", dev->name);
- writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->desc_ver, base + NvRegTxRxControl);
+ writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->txrxctl_bits, base + NvRegTxRxControl);
pci_push(base);
udelay(NV_TXRX_RESET_DELAY);
- writel(NVREG_TXRXCTL_BIT2 | np->desc_ver, base + NvRegTxRxControl);
+ writel(NVREG_TXRXCTL_BIT2 | np->txrxctl_bits, base + NvRegTxRxControl);
pci_push(base);
}
@@ -801,7 +812,7 @@
*/
static struct net_device_stats *nv_get_stats(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
/* It seems that the nic always generates interrupts and doesn't
* accumulate errors internally. Thus the current values in np->stats
@@ -817,7 +828,7 @@
*/
static int nv_alloc_rx(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
unsigned int refill_rx = np->refill_rx;
int nr;
@@ -861,7 +872,7 @@
static void nv_do_rx_refill(unsigned long data)
{
struct net_device *dev = (struct net_device *) data;
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
disable_irq(dev->irq);
if (nv_alloc_rx(dev)) {
@@ -875,7 +886,7 @@
static void nv_init_rx(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
int i;
np->cur_rx = RX_RING;
@@ -889,15 +900,17 @@
static void nv_init_tx(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
int i;
np->next_tx = np->nic_tx = 0;
- for (i = 0; i < TX_RING; i++)
+ for (i = 0; i < TX_RING; i++) {
if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
np->tx_ring.orig[i].FlagLen = 0;
else
np->tx_ring.ex[i].FlagLen = 0;
+ np->tx_skbuff[i] = NULL;
+ }
}
static int nv_init_ring(struct net_device *dev)
@@ -907,21 +920,44 @@
return nv_alloc_rx(dev);
}
+static void nv_release_txskb(struct net_device *dev, unsigned int skbnr)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ struct sk_buff *skb = np->tx_skbuff[skbnr];
+ unsigned int j, entry, fragments;
+
+ dprintk(KERN_INFO "%s: nv_release_txskb for skbnr %d, skb %p\n",
+ dev->name, skbnr, np->tx_skbuff[skbnr]);
+
+ entry = skbnr;
+ if ((fragments = skb_shinfo(skb)->nr_frags) != 0) {
+ for (j = fragments; j >= 1; j--) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[j-1];
+ pci_unmap_page(np->pci_dev, np->tx_dma[entry],
+ frag->size,
+ PCI_DMA_TODEVICE);
+ entry = (entry - 1) % TX_RING;
+ }
+ }
+ pci_unmap_single(np->pci_dev, np->tx_dma[entry],
+ skb->len - skb->data_len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(skb);
+ np->tx_skbuff[skbnr] = NULL;
+}
+
static void nv_drain_tx(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
- int i;
+ struct fe_priv *np = netdev_priv(dev);
+ unsigned int i;
+
for (i = 0; i < TX_RING; i++) {
if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
np->tx_ring.orig[i].FlagLen = 0;
else
np->tx_ring.ex[i].FlagLen = 0;
if (np->tx_skbuff[i]) {
- pci_unmap_single(np->pci_dev, np->tx_dma[i],
- np->tx_skbuff[i]->len,
- PCI_DMA_TODEVICE);
- dev_kfree_skb(np->tx_skbuff[i]);
- np->tx_skbuff[i] = NULL;
+ nv_release_txskb(dev, i);
np->stats.tx_dropped++;
}
}
@@ -929,7 +965,7 @@
static void nv_drain_rx(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
int i;
for (i = 0; i < RX_RING; i++) {
if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
@@ -959,28 +995,69 @@
*/
static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
- int nr = np->next_tx % TX_RING;
-
- np->tx_skbuff[nr] = skb;
- np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data,skb->len,
- PCI_DMA_TODEVICE);
-
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
- np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
- else {
- np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
- np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
- }
+ struct fe_priv *np = netdev_priv(dev);
+ u32 tx_flags_extra = (np->desc_ver == DESC_VER_1 ? NV_TX_LASTPACKET : NV_TX2_LASTPACKET);
+ unsigned int fragments = skb_shinfo(skb)->nr_frags;
+ unsigned int nr = (np->next_tx + fragments) % TX_RING;
+ unsigned int i;
spin_lock_irq(&np->lock);
- wmb();
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
- np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags );
+
+ if ((np->next_tx - np->nic_tx + fragments) > TX_LIMIT_STOP) {
+ spin_unlock_irq(&np->lock);
+ netif_stop_queue(dev);
+ return NETDEV_TX_BUSY;
+ }
+
+ np->tx_skbuff[nr] = skb;
+
+ if (fragments) {
+ dprintk(KERN_DEBUG "%s: nv_start_xmit: buffer contains %d fragments\n", dev->name, fragments);
+ /* setup descriptors in reverse order */
+ for (i = fragments; i >= 1; i--) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i-1];
+ np->tx_dma[nr] = pci_map_page(np->pci_dev, frag->page, frag->page_offset, frag->size,
+ PCI_DMA_TODEVICE);
+
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
+ np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (frag->size-1) | np->tx_flags | tx_flags_extra);
+ } else {
+ np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
+ np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
+ np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (frag->size-1) | np->tx_flags | tx_flags_extra);
+ }
+
+ nr = (nr - 1) % TX_RING;
+
+ if (np->desc_ver == DESC_VER_1)
+ tx_flags_extra &= ~NV_TX_LASTPACKET;
+ else
+ tx_flags_extra &= ~NV_TX2_LASTPACKET;
+ }
+ }
+
+#ifdef NETIF_F_TSO
+ if (skb_shinfo(skb)->tso_size)
+ tx_flags_extra |= NV_TX2_TSO | (skb_shinfo(skb)->tso_size << NV_TX2_TSO_SHIFT);
else
- np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags );
- dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission.\n",
- dev->name, np->next_tx);
+#endif
+ tx_flags_extra |= (skb->ip_summed == CHECKSUM_HW ? (NV_TX2_CHECKSUM_L3|NV_TX2_CHECKSUM_L4) : 0);
+
+ np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->len-skb->data_len,
+ PCI_DMA_TODEVICE);
+
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
+ np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-skb->data_len-1) | np->tx_flags | tx_flags_extra);
+ } else {
+ np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
+ np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
+ np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-skb->data_len-1) | np->tx_flags | tx_flags_extra);
+ }
+
+ dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission. tx_flags_extra: %x\n",
+ dev->name, np->next_tx, tx_flags_extra);
{
int j;
for (j=0; j<64; j++) {
@@ -991,15 +1068,13 @@
dprintk("\n");
}
- np->next_tx++;
+ np->next_tx += 1 + fragments;
dev->trans_start = jiffies;
- if (np->next_tx - np->nic_tx >= TX_LIMIT_STOP)
- netif_stop_queue(dev);
spin_unlock_irq(&np->lock);
- writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl);
+ writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
pci_push(get_hwbase(dev));
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -1009,9 +1084,10 @@
*/
static void nv_tx_done(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u32 Flags;
- int i;
+ unsigned int i;
+ struct sk_buff *skb;
while (np->nic_tx != np->next_tx) {
i = np->nic_tx % TX_RING;
@@ -1026,35 +1102,38 @@
if (Flags & NV_TX_VALID)
break;
if (np->desc_ver == DESC_VER_1) {
- if (Flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION|
- NV_TX_UNDERFLOW|NV_TX_ERROR)) {
- if (Flags & NV_TX_UNDERFLOW)
- np->stats.tx_fifo_errors++;
- if (Flags & NV_TX_CARRIERLOST)
- np->stats.tx_carrier_errors++;
- np->stats.tx_errors++;
- } else {
- np->stats.tx_packets++;
- np->stats.tx_bytes += np->tx_skbuff[i]->len;
+ if (Flags & NV_TX_LASTPACKET) {
+ skb = np->tx_skbuff[i];
+ if (Flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION|
+ NV_TX_UNDERFLOW|NV_TX_ERROR)) {
+ if (Flags & NV_TX_UNDERFLOW)
+ np->stats.tx_fifo_errors++;
+ if (Flags & NV_TX_CARRIERLOST)
+ np->stats.tx_carrier_errors++;
+ np->stats.tx_errors++;
+ } else {
+ np->stats.tx_packets++;
+ np->stats.tx_bytes += skb->len;
+ }
+ nv_release_txskb(dev, i);
}
} else {
- if (Flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION|
- NV_TX2_UNDERFLOW|NV_TX2_ERROR)) {
- if (Flags & NV_TX2_UNDERFLOW)
- np->stats.tx_fifo_errors++;
- if (Flags & NV_TX2_CARRIERLOST)
- np->stats.tx_carrier_errors++;
- np->stats.tx_errors++;
- } else {
- np->stats.tx_packets++;
- np->stats.tx_bytes += np->tx_skbuff[i]->len;
+ if (Flags & NV_TX2_LASTPACKET) {
+ skb = np->tx_skbuff[i];
+ if (Flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION|
+ NV_TX2_UNDERFLOW|NV_TX2_ERROR)) {
+ if (Flags & NV_TX2_UNDERFLOW)
+ np->stats.tx_fifo_errors++;
+ if (Flags & NV_TX2_CARRIERLOST)
+ np->stats.tx_carrier_errors++;
+ np->stats.tx_errors++;
+ } else {
+ np->stats.tx_packets++;
+ np->stats.tx_bytes += skb->len;
+ }
+ nv_release_txskb(dev, i);
}
}
- pci_unmap_single(np->pci_dev, np->tx_dma[i],
- np->tx_skbuff[i]->len,
- PCI_DMA_TODEVICE);
- dev_kfree_skb_irq(np->tx_skbuff[i]);
- np->tx_skbuff[i] = NULL;
np->nic_tx++;
}
if (np->next_tx - np->nic_tx < TX_LIMIT_START)
@@ -1067,7 +1146,7 @@
*/
static void nv_tx_timeout(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name,
@@ -1200,7 +1279,7 @@
static void nv_rx_process(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u32 Flags;
for (;;) {
@@ -1355,7 +1434,7 @@
*/
static int nv_change_mtu(struct net_device *dev, int new_mtu)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
int old_mtu;
if (new_mtu < 64 || new_mtu > np->pkt_limit)
@@ -1408,7 +1487,7 @@
writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT),
base + NvRegRingSizes);
pci_push(base);
- writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl);
+ writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
pci_push(base);
/* restart rx engine */
@@ -1440,7 +1519,7 @@
*/
static int nv_set_mac_address(struct net_device *dev, void *addr)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
struct sockaddr *macaddr = (struct sockaddr*)addr;
if(!is_valid_ether_addr(macaddr->sa_data))
@@ -1475,7 +1554,7 @@
*/
static void nv_set_multicast(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
u32 addr[2];
u32 mask[2];
@@ -1535,7 +1614,7 @@
static int nv_update_linkspeed(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
int adv, lpa;
int newls = np->linkspeed;
@@ -1705,7 +1784,7 @@
static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) data;
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
u32 events;
int i;
@@ -1777,7 +1856,7 @@
static void nv_do_nic_poll(unsigned long data)
{
struct net_device *dev = (struct net_device *) data;
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
disable_irq(dev->irq);
@@ -1801,7 +1880,7 @@
static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
strcpy(info->driver, "forcedeth");
strcpy(info->version, FORCEDETH_VERSION);
strcpy(info->bus_info, pci_name(np->pci_dev));
@@ -1809,7 +1888,7 @@
static void nv_get_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
wolinfo->supported = WAKE_MAGIC;
spin_lock_irq(&np->lock);
@@ -1820,7 +1899,7 @@
static int nv_set_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
spin_lock_irq(&np->lock);
@@ -2021,7 +2100,7 @@
static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
u32 *rbuf = buf;
int i;
@@ -2035,7 +2114,7 @@
static int nv_nway_reset(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
int ret;
spin_lock_irq(&np->lock);
@@ -2065,11 +2144,12 @@
.get_regs_len = nv_get_regs_len,
.get_regs = nv_get_regs,
.nway_reset = nv_nway_reset,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static int nv_open(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
int ret, oom, i;
@@ -2114,9 +2194,9 @@
/* 5) continue setup */
writel(np->linkspeed, base + NvRegLinkSpeed);
writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
- writel(np->desc_ver, base + NvRegTxRxControl);
+ writel(np->txrxctl_bits, base + NvRegTxRxControl);
pci_push(base);
- writel(NVREG_TXRXCTL_BIT1|np->desc_ver, base + NvRegTxRxControl);
+ writel(NVREG_TXRXCTL_BIT1|np->txrxctl_bits, base + NvRegTxRxControl);
reg_delay(dev, NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31,
NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX,
KERN_INFO "open: SetupReg5, Bit 31 remained off\n");
@@ -2205,7 +2285,7 @@
static int nv_close(struct net_device *dev)
{
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base;
spin_lock_irq(&np->lock);
@@ -2261,7 +2341,7 @@
if (!dev)
goto out;
- np = get_nvpriv(dev);
+ np = netdev_priv(dev);
np->pci_dev = pci_dev;
spin_lock_init(&np->lock);
SET_MODULE_OWNER(dev);
@@ -2313,19 +2393,32 @@
if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
pci_name(pci_dev));
+ } else {
+ dev->features |= NETIF_F_HIGHDMA;
}
+ np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
} else if (id->driver_data & DEV_HAS_LARGEDESC) {
/* packet format 2: supports jumbo frames */
np->desc_ver = DESC_VER_2;
+ np->txrxctl_bits = NVREG_TXRXCTL_DESC_2;
} else {
/* original packet format */
np->desc_ver = DESC_VER_1;
+ np->txrxctl_bits = NVREG_TXRXCTL_DESC_1;
}
np->pkt_limit = NV_PKTLIMIT_1;
if (id->driver_data & DEV_HAS_LARGEDESC)
np->pkt_limit = NV_PKTLIMIT_2;
+ if (id->driver_data & DEV_HAS_CHECKSUM) {
+ np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
+ dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
+#ifdef NETIF_F_TSO
+ dev->features |= NETIF_F_TSO;
+#endif
+ }
+
err = -ENOMEM;
np->base = ioremap(addr, NV_PCI_REGSZ);
if (!np->base)
@@ -2377,8 +2470,9 @@
dev->dev_addr[3] = (np->orig_mac[0] >> 16) & 0xff;
dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff;
dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff;
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (!is_valid_ether_addr(dev->perm_addr)) {
/*
* Bad mac address. At least one bios sets the mac address
* to 01:23:45:67:89:ab
@@ -2403,9 +2497,9 @@
np->wolenabled = 0;
if (np->desc_ver == DESC_VER_1) {
- np->tx_flags = NV_TX_LASTPACKET|NV_TX_VALID;
+ np->tx_flags = NV_TX_VALID;
} else {
- np->tx_flags = NV_TX2_LASTPACKET|NV_TX2_VALID;
+ np->tx_flags = NV_TX2_VALID;
}
np->irqmask = NVREG_IRQMASK_WANTED;
if (id->driver_data & DEV_NEED_TIMERIRQ)
@@ -2494,7 +2588,7 @@
static void __devexit nv_remove(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
- struct fe_priv *np = get_nvpriv(dev);
+ struct fe_priv *np = netdev_priv(dev);
unregister_netdev(dev);
@@ -2525,35 +2619,35 @@
},
{ /* nForce3 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
},
{ /* nForce3 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
},
{ /* nForce3 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
},
{ /* nForce3 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
},
{ /* CK804 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
},
{ /* CK804 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
},
{ /* MCP04 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
},
{ /* MCP04 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
},
{ /* MCP51 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12),
@@ -2565,11 +2659,11 @@
},
{ /* MCP55 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
},
{ /* MCP55 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
},
{0,},
};
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
new file mode 100644
index 0000000..6aaee67
--- /dev/null
+++ b/drivers/net/fs_enet/Kconfig
@@ -0,0 +1,20 @@
+config FS_ENET
+ tristate "Freescale Ethernet Driver"
+ depends on NET_ETHERNET && (CPM1 || CPM2)
+ select MII
+
+config FS_ENET_HAS_SCC
+ bool "Chip has an SCC usable for ethernet"
+ depends on FS_ENET && (CPM1 || CPM2)
+ default y
+
+config FS_ENET_HAS_FCC
+ bool "Chip has an FCC usable for ethernet"
+ depends on FS_ENET && CPM2
+ default y
+
+config FS_ENET_HAS_FEC
+ bool "Chip has an FEC usable for ethernet"
+ depends on FS_ENET && CPM1
+ default y
+
diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile
new file mode 100644
index 0000000..d6dd3f2
--- /dev/null
+++ b/drivers/net/fs_enet/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the Freescale Ethernet controllers
+#
+
+obj-$(CONFIG_FS_ENET) += fs_enet.o
+
+obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o
+obj-$(CONFIG_8260) += mac-fcc.o
+
+fs_enet-objs := fs_enet-main.o fs_enet-mii.o mii-bitbang.o mii-fixed.o
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
new file mode 100644
index 0000000..44fac73
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -0,0 +1,1226 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Heavily based on original FEC driver by Dan Malek <dan@embeddededge.com>
+ * and modifications by Joakim Tjernlund <joakim.tjernlund@lumentis.se>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <linux/vmalloc.h>
+#include <asm/pgtable.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+static char version[] __devinitdata =
+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n";
+
+MODULE_AUTHOR("Pantelis Antoniou <panto@intracom.gr>");
+MODULE_DESCRIPTION("Freescale Ethernet Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+MODULE_PARM(fs_enet_debug, "i");
+MODULE_PARM_DESC(fs_enet_debug,
+ "Freescale bitmapped debugging message enable value");
+
+int fs_enet_debug = -1; /* -1 == use FS_ENET_DEF_MSG_ENABLE as value */
+
+static void fs_set_multicast_list(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ (*fep->ops->set_multicast_list)(dev);
+}
+
+/* NAPI receive function */
+static int fs_enet_rx_napi(struct net_device *dev, int *budget)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ cbd_t *bdp;
+ struct sk_buff *skb, *skbn, *skbt;
+ int received = 0;
+ u16 pkt_len, sc;
+ int curidx;
+ int rx_work_limit = 0; /* pacify gcc */
+
+ rx_work_limit = min(dev->quota, *budget);
+
+ if (!netif_running(dev))
+ return 0;
+
+ /*
+ * First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = fep->cur_rx;
+
+ /* clear RX status bits for napi*/
+ (*fep->ops->napi_clear_rx_event)(dev);
+
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) {
+
+ curidx = bdp - fep->rx_bd_base;
+
+ /*
+ * Since we have allocated space to hold a complete frame,
+ * the last indicator should be set.
+ */
+ if ((sc & BD_ENET_RX_LAST) == 0)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s rcv is not +last\n",
+ dev->name);
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL |
+ BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+ fep->stats.rx_errors++;
+ /* Frame too long or too short. */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
+ fep->stats.rx_length_errors++;
+ /* Frame alignment */
+ if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL))
+ fep->stats.rx_frame_errors++;
+ /* CRC Error */
+ if (sc & BD_ENET_RX_CR)
+ fep->stats.rx_crc_errors++;
+ /* FIFO overrun */
+ if (sc & BD_ENET_RX_OV)
+ fep->stats.rx_crc_errors++;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ skbn = skb;
+
+ } else {
+
+ /* napi, got packet but no quota */
+ if (--rx_work_limit < 0)
+ break;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ /*
+ * Process the incoming frame.
+ */
+ fep->stats.rx_packets++;
+ pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */
+ fep->stats.rx_bytes += pkt_len + 4;
+
+ if (pkt_len <= fpi->rx_copybreak) {
+ /* +2 to make IP header L1 cache aligned */
+ skbn = dev_alloc_skb(pkt_len + 2);
+ if (skbn != NULL) {
+ skb_reserve(skbn, 2); /* align IP header */
+ memcpy(skbn->data, skb->data, pkt_len);
+ /* swap */
+ skbt = skb;
+ skb = skbn;
+ skbn = skbt;
+ }
+ } else
+ skbn = dev_alloc_skb(ENET_RX_FRSIZE);
+
+ if (skbn != NULL) {
+ skb->dev = dev;
+ skb_put(skb, pkt_len); /* Make room */
+ skb->protocol = eth_type_trans(skb, dev);
+ received++;
+ netif_receive_skb(skb);
+ } else {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, dropping packet.\n",
+ dev->name);
+ fep->stats.rx_dropped++;
+ skbn = skb;
+ }
+ }
+
+ fep->rx_skbuff[curidx] = skbn;
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY);
+
+ /*
+ * Update BD pointer to next entry.
+ */
+ if ((sc & BD_ENET_RX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->rx_bd_base;
+
+ (*fep->ops->rx_bd_done)(dev);
+ }
+
+ fep->cur_rx = bdp;
+
+ dev->quota -= received;
+ *budget -= received;
+
+ if (rx_work_limit < 0)
+ return 1; /* not done */
+
+ /* done */
+ netif_rx_complete(dev);
+
+ (*fep->ops->napi_enable_rx)(dev);
+
+ return 0;
+}
+
+/* non NAPI receive function */
+static int fs_enet_rx_non_napi(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ cbd_t *bdp;
+ struct sk_buff *skb, *skbn, *skbt;
+ int received = 0;
+ u16 pkt_len, sc;
+ int curidx;
+ /*
+ * First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = fep->cur_rx;
+
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) {
+
+ curidx = bdp - fep->rx_bd_base;
+
+ /*
+ * Since we have allocated space to hold a complete frame,
+ * the last indicator should be set.
+ */
+ if ((sc & BD_ENET_RX_LAST) == 0)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s rcv is not +last\n",
+ dev->name);
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL |
+ BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+ fep->stats.rx_errors++;
+ /* Frame too long or too short. */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
+ fep->stats.rx_length_errors++;
+ /* Frame alignment */
+ if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL))
+ fep->stats.rx_frame_errors++;
+ /* CRC Error */
+ if (sc & BD_ENET_RX_CR)
+ fep->stats.rx_crc_errors++;
+ /* FIFO overrun */
+ if (sc & BD_ENET_RX_OV)
+ fep->stats.rx_crc_errors++;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ skbn = skb;
+
+ } else {
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ /*
+ * Process the incoming frame.
+ */
+ fep->stats.rx_packets++;
+ pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */
+ fep->stats.rx_bytes += pkt_len + 4;
+
+ if (pkt_len <= fpi->rx_copybreak) {
+ /* +2 to make IP header L1 cache aligned */
+ skbn = dev_alloc_skb(pkt_len + 2);
+ if (skbn != NULL) {
+ skb_reserve(skbn, 2); /* align IP header */
+ memcpy(skbn->data, skb->data, pkt_len);
+ /* swap */
+ skbt = skb;
+ skb = skbn;
+ skbn = skbt;
+ }
+ } else
+ skbn = dev_alloc_skb(ENET_RX_FRSIZE);
+
+ if (skbn != NULL) {
+ skb->dev = dev;
+ skb_put(skb, pkt_len); /* Make room */
+ skb->protocol = eth_type_trans(skb, dev);
+ received++;
+ netif_rx(skb);
+ } else {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, dropping packet.\n",
+ dev->name);
+ fep->stats.rx_dropped++;
+ skbn = skb;
+ }
+ }
+
+ fep->rx_skbuff[curidx] = skbn;
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY);
+
+ /*
+ * Update BD pointer to next entry.
+ */
+ if ((sc & BD_ENET_RX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->rx_bd_base;
+
+ (*fep->ops->rx_bd_done)(dev);
+ }
+
+ fep->cur_rx = bdp;
+
+ return 0;
+}
+
+static void fs_enet_tx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ struct sk_buff *skb;
+ int dirtyidx, do_wake, do_restart;
+ u16 sc;
+
+ spin_lock(&fep->lock);
+ bdp = fep->dirty_tx;
+
+ do_wake = do_restart = 0;
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) {
+
+ dirtyidx = bdp - fep->tx_bd_base;
+
+ if (fep->tx_free == fep->tx_ring)
+ break;
+
+ skb = fep->tx_skbuff[dirtyidx];
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) {
+
+ if (sc & BD_ENET_TX_HB) /* No heartbeat */
+ fep->stats.tx_heartbeat_errors++;
+ if (sc & BD_ENET_TX_LC) /* Late collision */
+ fep->stats.tx_window_errors++;
+ if (sc & BD_ENET_TX_RL) /* Retrans limit */
+ fep->stats.tx_aborted_errors++;
+ if (sc & BD_ENET_TX_UN) /* Underrun */
+ fep->stats.tx_fifo_errors++;
+ if (sc & BD_ENET_TX_CSL) /* Carrier lost */
+ fep->stats.tx_carrier_errors++;
+
+ if (sc & (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
+ fep->stats.tx_errors++;
+ do_restart = 1;
+ }
+ } else
+ fep->stats.tx_packets++;
+
+ if (sc & BD_ENET_TX_READY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s HEY! Enet xmit interrupt and TX_READY.\n",
+ dev->name);
+
+ /*
+ * Deferred means some collisions occurred during transmit,
+ * but we eventually sent the packet OK.
+ */
+ if (sc & BD_ENET_TX_DEF)
+ fep->stats.collisions++;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+ /*
+ * Free the sk buffer associated with this last transmit.
+ */
+ dev_kfree_skb_irq(skb);
+ fep->tx_skbuff[dirtyidx] = NULL;
+
+ /*
+ * Update pointer to next buffer descriptor to be transmitted.
+ */
+ if ((sc & BD_ENET_TX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->tx_bd_base;
+
+ /*
+ * Since we have freed up a buffer, the ring is no longer
+ * full.
+ */
+ if (!fep->tx_free++)
+ do_wake = 1;
+ }
+
+ fep->dirty_tx = bdp;
+
+ if (do_restart)
+ (*fep->ops->tx_restart)(dev);
+
+ spin_unlock(&fep->lock);
+
+ if (do_wake)
+ netif_wake_queue(dev);
+}
+
+/*
+ * The interrupt handler.
+ * This is called from the MPC core interrupt.
+ */
+static irqreturn_t
+fs_enet_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+ u32 int_events;
+ u32 int_clr_events;
+ int nr, napi_ok;
+ int handled;
+
+ fep = netdev_priv(dev);
+ fpi = fep->fpi;
+
+ nr = 0;
+ while ((int_events = (*fep->ops->get_int_events)(dev)) != 0) {
+
+ nr++;
+
+ int_clr_events = int_events;
+ if (fpi->use_napi)
+ int_clr_events &= ~fep->ev_napi_rx;
+
+ (*fep->ops->clear_int_events)(dev, int_clr_events);
+
+ if (int_events & fep->ev_err)
+ (*fep->ops->ev_error)(dev, int_events);
+
+ if (int_events & fep->ev_rx) {
+ if (!fpi->use_napi)
+ fs_enet_rx_non_napi(dev);
+ else {
+ napi_ok = netif_rx_schedule_prep(dev);
+
+ (*fep->ops->napi_disable_rx)(dev);
+ (*fep->ops->clear_int_events)(dev, fep->ev_napi_rx);
+
+ /* NOTE: it is possible for FCCs in NAPI mode */
+ /* to submit a spurious interrupt while in poll */
+ if (napi_ok)
+ __netif_rx_schedule(dev);
+ }
+ }
+
+ if (int_events & fep->ev_tx)
+ fs_enet_tx(dev);
+ }
+
+ handled = nr > 0;
+ return IRQ_RETVAL(handled);
+}
+
+void fs_init_bds(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ struct sk_buff *skb;
+ int i;
+
+ fs_cleanup_bds(dev);
+
+ fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
+ fep->tx_free = fep->tx_ring;
+ fep->cur_rx = fep->rx_bd_base;
+
+ /*
+ * Initialize the receive buffer descriptors.
+ */
+ for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) {
+ skb = dev_alloc_skb(ENET_RX_FRSIZE);
+ if (skb == NULL) {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, unable to allocate skb\n",
+ dev->name);
+ break;
+ }
+ fep->rx_skbuff[i] = skb;
+ skb->dev = dev;
+ CBDW_BUFADDR(bdp,
+ dma_map_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0); /* zero */
+ CBDW_SC(bdp, BD_ENET_RX_EMPTY |
+ ((i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP));
+ }
+ /*
+ * if we failed, fillup remainder
+ */
+ for (; i < fep->rx_ring; i++, bdp++) {
+ fep->rx_skbuff[i] = NULL;
+ CBDW_SC(bdp, (i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP);
+ }
+
+ /*
+ * ...and the same for transmit.
+ */
+ for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) {
+ fep->tx_skbuff[i] = NULL;
+ CBDW_BUFADDR(bdp, 0);
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (i < fep->tx_ring - 1) ? 0 : BD_SC_WRAP);
+ }
+}
+
+void fs_cleanup_bds(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct sk_buff *skb;
+ int i;
+
+ /*
+ * Reset SKB transmit buffers.
+ */
+ for (i = 0; i < fep->tx_ring; i++) {
+ if ((skb = fep->tx_skbuff[i]) == NULL)
+ continue;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+ fep->tx_skbuff[i] = NULL;
+ dev_kfree_skb(skb);
+ }
+
+ /*
+ * Reset SKB receive buffers
+ */
+ for (i = 0; i < fep->rx_ring; i++) {
+ if ((skb = fep->rx_skbuff[i]) == NULL)
+ continue;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ fep->rx_skbuff[i] = NULL;
+
+ dev_kfree_skb(skb);
+ }
+}
+
+/**********************************************************************************/
+
+static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ int curidx;
+ u16 sc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fep->tx_lock, flags);
+
+ /*
+ * Fill in a Tx ring entry
+ */
+ bdp = fep->cur_tx;
+
+ if (!fep->tx_free || (CBDR_SC(bdp) & BD_ENET_TX_READY)) {
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&fep->tx_lock, flags);
+
+ /*
+ * Ooops. All transmit buffers are full. Bail out.
+ * This should not happen, since the tx queue should be stopped.
+ */
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s tx queue full!.\n", dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ curidx = bdp - fep->tx_bd_base;
+ /*
+ * Clear all of the status flags.
+ */
+ CBDC_SC(bdp, BD_ENET_TX_STATS);
+
+ /*
+ * Save skb pointer.
+ */
+ fep->tx_skbuff[curidx] = skb;
+
+ fep->stats.tx_bytes += skb->len;
+
+ /*
+ * Push the data cache so the CPM does not get stale memory data.
+ */
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev,
+ skb->data, skb->len, DMA_TO_DEVICE));
+ CBDW_DATLEN(bdp, skb->len);
+
+ dev->trans_start = jiffies;
+
+ /*
+ * If this was the last BD in the ring, start at the beginning again.
+ */
+ if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0)
+ fep->cur_tx++;
+ else
+ fep->cur_tx = fep->tx_bd_base;
+
+ if (!--fep->tx_free)
+ netif_stop_queue(dev);
+
+ /* Trigger transmission start */
+ sc = BD_ENET_TX_READY | BD_ENET_TX_INTR |
+ BD_ENET_TX_LAST | BD_ENET_TX_TC;
+
+ /* note that while FEC does not have this bit
+ * it marks it as available for software use
+ * yay for hw reuse :) */
+ if (skb->len <= 60)
+ sc |= BD_ENET_TX_PAD;
+ CBDS_SC(bdp, sc);
+
+ (*fep->ops->tx_kickstart)(dev);
+
+ spin_unlock_irqrestore(&fep->tx_lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static int fs_request_irq(struct net_device *dev, int irq, const char *name,
+ irqreturn_t (*irqf)(int irq, void *dev_id, struct pt_regs *regs))
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ (*fep->ops->pre_request_irq)(dev, irq);
+ return request_irq(irq, irqf, SA_SHIRQ, name, dev);
+}
+
+static void fs_free_irq(struct net_device *dev, int irq)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ free_irq(irq, dev);
+ (*fep->ops->post_free_irq)(dev, irq);
+}
+
+/**********************************************************************************/
+
+/* This interrupt occurs when the PHY detects a link change. */
+static irqreturn_t
+fs_mii_link_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+
+ fep = netdev_priv(dev);
+ fpi = fep->fpi;
+
+ /*
+ * Acknowledge the interrupt if possible. If we have not
+ * found the PHY yet we can't process or acknowledge the
+ * interrupt now. Instead we ignore this interrupt for now,
+ * which we can do since it is edge triggered. It will be
+ * acknowledged later by fs_enet_open().
+ */
+ if (!fep->phy)
+ return IRQ_NONE;
+
+ fs_mii_ack_int(dev);
+ fs_mii_link_status_change_check(dev, 0);
+
+ return IRQ_HANDLED;
+}
+
+static void fs_timeout(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int wake = 0;
+
+ fep->stats.tx_errors++;
+
+ spin_lock_irqsave(&fep->lock, flags);
+
+ if (dev->flags & IFF_UP) {
+ (*fep->ops->stop)(dev);
+ (*fep->ops->restart)(dev);
+ }
+
+ wake = fep->tx_free && !(CBDR_SC(fep->cur_tx) & BD_ENET_TX_READY);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ if (wake)
+ netif_wake_queue(dev);
+}
+
+static int fs_enet_open(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ int r;
+
+ /* Install our interrupt handler. */
+ r = fs_request_irq(dev, fep->interrupt, "fs_enet-mac", fs_enet_interrupt);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Could not allocate FEC IRQ!", dev->name);
+ return -EINVAL;
+ }
+
+ /* Install our phy interrupt handler */
+ if (fpi->phy_irq != -1) {
+
+ r = fs_request_irq(dev, fpi->phy_irq, "fs_enet-phy", fs_mii_link_interrupt);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Could not allocate PHY IRQ!", dev->name);
+ fs_free_irq(dev, fep->interrupt);
+ return -EINVAL;
+ }
+ }
+
+ fs_mii_startup(dev);
+ netif_carrier_off(dev);
+ fs_mii_link_status_change_check(dev, 1);
+
+ return 0;
+}
+
+static int fs_enet_close(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ unsigned long flags;
+
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+ fs_mii_shutdown(dev);
+
+ spin_lock_irqsave(&fep->lock, flags);
+ (*fep->ops->stop)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ /* release any irqs */
+ if (fpi->phy_irq != -1)
+ fs_free_irq(dev, fpi->phy_irq);
+ fs_free_irq(dev, fep->interrupt);
+
+ return 0;
+}
+
+static struct net_device_stats *fs_enet_get_stats(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return &fep->stats;
+}
+
+/*************************************************************************/
+
+static void fs_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_MODULE_NAME);
+ strcpy(info->version, DRV_MODULE_VERSION);
+}
+
+static int fs_get_regs_len(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ return (*fep->ops->get_regs_len)(dev);
+}
+
+static void fs_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int r, len;
+
+ len = regs->len;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ r = (*fep->ops->get_regs)(dev, p, &len);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ if (r == 0)
+ regs->version = 0;
+}
+
+static int fs_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = mii_ethtool_gset(&fep->mii_if, cmd);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ return rc;
+}
+
+static int fs_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = mii_ethtool_sset(&fep->mii_if, cmd);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ return rc;
+}
+
+static int fs_nway_reset(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return mii_nway_restart(&fep->mii_if);
+}
+
+static u32 fs_get_msglevel(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return fep->msg_enable;
+}
+
+static void fs_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fep->msg_enable = value;
+}
+
+static struct ethtool_ops fs_ethtool_ops = {
+ .get_drvinfo = fs_get_drvinfo,
+ .get_regs_len = fs_get_regs_len,
+ .get_settings = fs_get_settings,
+ .set_settings = fs_set_settings,
+ .nway_reset = fs_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = fs_get_msglevel,
+ .set_msglevel = fs_set_msglevel,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum, /* local! */
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_regs = fs_get_regs,
+};
+
+static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data;
+ unsigned long flags;
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL);
+ spin_unlock_irqrestore(&fep->lock, flags);
+ return rc;
+}
+
+extern int fs_mii_connect(struct net_device *dev);
+extern void fs_mii_disconnect(struct net_device *dev);
+
+static struct net_device *fs_init_instance(struct device *dev,
+ const struct fs_platform_info *fpi)
+{
+ struct net_device *ndev = NULL;
+ struct fs_enet_private *fep = NULL;
+ int privsize, i, r, err = 0, registered = 0;
+
+ /* guard */
+ if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX)
+ return ERR_PTR(-EINVAL);
+
+ privsize = sizeof(*fep) + (sizeof(struct sk_buff **) *
+ (fpi->rx_ring + fpi->tx_ring));
+
+ ndev = alloc_etherdev(privsize);
+ if (!ndev) {
+ err = -ENOMEM;
+ goto err;
+ }
+ SET_MODULE_OWNER(ndev);
+
+ fep = netdev_priv(ndev);
+ memset(fep, 0, privsize); /* clear everything */
+
+ fep->dev = dev;
+ dev_set_drvdata(dev, ndev);
+ fep->fpi = fpi;
+ if (fpi->init_ioports)
+ fpi->init_ioports();
+
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ if (fs_get_fec_index(fpi->fs_no) >= 0)
+ fep->ops = &fs_fec_ops;
+#endif
+
+#ifdef CONFIG_FS_ENET_HAS_SCC
+ if (fs_get_scc_index(fpi->fs_no) >=0 )
+ fep->ops = &fs_scc_ops;
+#endif
+
+#ifdef CONFIG_FS_ENET_HAS_FCC
+ if (fs_get_fcc_index(fpi->fs_no) >= 0)
+ fep->ops = &fs_fcc_ops;
+#endif
+
+ if (fep->ops == NULL) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s No matching ops found (%d).\n",
+ ndev->name, fpi->fs_no);
+ err = -EINVAL;
+ goto err;
+ }
+
+ r = (*fep->ops->setup_data)(ndev);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s setup_data failed\n",
+ ndev->name);
+ err = r;
+ goto err;
+ }
+
+ /* point rx_skbuff, tx_skbuff */
+ fep->rx_skbuff = (struct sk_buff **)&fep[1];
+ fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring;
+
+ /* init locks */
+ spin_lock_init(&fep->lock);
+ spin_lock_init(&fep->tx_lock);
+
+ /*
+ * Set the Ethernet address.
+ */
+ for (i = 0; i < 6; i++)
+ ndev->dev_addr[i] = fpi->macaddr[i];
+
+ r = (*fep->ops->allocate_bd)(ndev);
+
+ if (fep->ring_base == NULL) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s buffer descriptor alloc failed (%d).\n", ndev->name, r);
+ err = r;
+ goto err;
+ }
+
+ /*
+ * Set receive and transmit descriptor base.
+ */
+ fep->rx_bd_base = fep->ring_base;
+ fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring;
+
+ /* initialize ring size variables */
+ fep->tx_ring = fpi->tx_ring;
+ fep->rx_ring = fpi->rx_ring;
+
+ /*
+ * The FEC Ethernet specific entries in the device structure.
+ */
+ ndev->open = fs_enet_open;
+ ndev->hard_start_xmit = fs_enet_start_xmit;
+ ndev->tx_timeout = fs_timeout;
+ ndev->watchdog_timeo = 2 * HZ;
+ ndev->stop = fs_enet_close;
+ ndev->get_stats = fs_enet_get_stats;
+ ndev->set_multicast_list = fs_set_multicast_list;
+ if (fpi->use_napi) {
+ ndev->poll = fs_enet_rx_napi;
+ ndev->weight = fpi->napi_weight;
+ }
+ ndev->ethtool_ops = &fs_ethtool_ops;
+ ndev->do_ioctl = fs_ioctl;
+
+ init_timer(&fep->phy_timer_list);
+
+ netif_carrier_off(ndev);
+
+ err = register_netdev(ndev);
+ if (err != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s register_netdev failed.\n", ndev->name);
+ goto err;
+ }
+ registered = 1;
+
+ err = fs_mii_connect(ndev);
+ if (err != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s fs_mii_connect failed.\n", ndev->name);
+ goto err;
+ }
+
+ return ndev;
+
+ err:
+ if (ndev != NULL) {
+
+ if (registered)
+ unregister_netdev(ndev);
+
+ if (fep != NULL) {
+ (*fep->ops->free_bd)(ndev);
+ (*fep->ops->cleanup_data)(ndev);
+ }
+
+ free_netdev(ndev);
+ }
+
+ dev_set_drvdata(dev, NULL);
+
+ return ERR_PTR(err);
+}
+
+static int fs_cleanup_instance(struct net_device *ndev)
+{
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+ struct device *dev;
+
+ if (ndev == NULL)
+ return -EINVAL;
+
+ fep = netdev_priv(ndev);
+ if (fep == NULL)
+ return -EINVAL;
+
+ fpi = fep->fpi;
+
+ fs_mii_disconnect(ndev);
+
+ unregister_netdev(ndev);
+
+ dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
+ fep->ring_base, fep->ring_mem_addr);
+
+ /* reset it */
+ (*fep->ops->cleanup_data)(ndev);
+
+ dev = fep->dev;
+ if (dev != NULL) {
+ dev_set_drvdata(dev, NULL);
+ fep->dev = NULL;
+ }
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+/**************************************************************************************/
+
+/* handy pointer to the immap */
+void *fs_enet_immap = NULL;
+
+static int setup_immap(void)
+{
+ phys_addr_t paddr = 0;
+ unsigned long size = 0;
+
+#ifdef CONFIG_CPM1
+ paddr = IMAP_ADDR;
+ size = 0x10000; /* map 64K */
+#endif
+
+#ifdef CONFIG_CPM2
+ paddr = CPM_MAP_ADDR;
+ size = 0x40000; /* map 256 K */
+#endif
+ fs_enet_immap = ioremap(paddr, size);
+ if (fs_enet_immap == NULL)
+ return -EBADF; /* XXX ahem; maybe just BUG_ON? */
+
+ return 0;
+}
+
+static void cleanup_immap(void)
+{
+ if (fs_enet_immap != NULL) {
+ iounmap(fs_enet_immap);
+ fs_enet_immap = NULL;
+ }
+}
+
+/**************************************************************************************/
+
+static int __devinit fs_enet_probe(struct device *dev)
+{
+ struct net_device *ndev;
+
+ /* no fixup - no device */
+ if (dev->platform_data == NULL) {
+ printk(KERN_INFO "fs_enet: "
+ "probe called with no platform data; "
+ "remove unused devices\n");
+ return -ENODEV;
+ }
+
+ ndev = fs_init_instance(dev, dev->platform_data);
+ if (IS_ERR(ndev))
+ return PTR_ERR(ndev);
+ return 0;
+}
+
+static int fs_enet_remove(struct device *dev)
+{
+ return fs_cleanup_instance(dev_get_drvdata(dev));
+}
+
+static struct device_driver fs_enet_fec_driver = {
+ .name = "fsl-cpm-fec",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static struct device_driver fs_enet_scc_driver = {
+ .name = "fsl-cpm-scc",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static struct device_driver fs_enet_fcc_driver = {
+ .name = "fsl-cpm-fcc",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static int __init fs_init(void)
+{
+ int r;
+
+ printk(KERN_INFO
+ "%s", version);
+
+ r = setup_immap();
+ if (r != 0)
+ return r;
+ r = driver_register(&fs_enet_fec_driver);
+ if (r != 0)
+ goto err;
+
+ r = driver_register(&fs_enet_fcc_driver);
+ if (r != 0)
+ goto err;
+
+ r = driver_register(&fs_enet_scc_driver);
+ if (r != 0)
+ goto err;
+
+ return 0;
+err:
+ cleanup_immap();
+ return r;
+
+}
+
+static void __exit fs_cleanup(void)
+{
+ driver_unregister(&fs_enet_fec_driver);
+ driver_unregister(&fs_enet_fcc_driver);
+ driver_unregister(&fs_enet_scc_driver);
+ cleanup_immap();
+}
+
+/**************************************************************************************/
+
+module_init(fs_init);
+module_exit(fs_cleanup);
diff --git a/drivers/net/fs_enet/fs_enet-mii.c b/drivers/net/fs_enet/fs_enet-mii.c
new file mode 100644
index 0000000..c677037
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet-mii.c
@@ -0,0 +1,507 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Heavily based on original FEC driver by Dan Malek <dan@embeddededge.com>
+ * and modifications by Joakim Tjernlund <joakim.tjernlund@lumentis.se>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+/*
+ * Generic PHY support.
+ * Should work for all PHYs, but link change is detected by polling
+ */
+
+static void generic_timer_callback(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->phy_timer_list.expires = jiffies + HZ / 2;
+
+ add_timer(&fep->phy_timer_list);
+
+ fs_mii_link_status_change_check(dev, 0);
+}
+
+static void generic_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */
+ fep->phy_timer_list.data = (unsigned long)dev;
+ fep->phy_timer_list.function = generic_timer_callback;
+ add_timer(&fep->phy_timer_list);
+}
+
+static void generic_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ del_timer_sync(&fep->phy_timer_list);
+}
+
+/* ------------------------------------------------------------------------- */
+/* The Davicom DM9161 is used on the NETTA board */
+
+/* register definitions */
+
+#define MII_DM9161_ANAR 4 /* Aux. Config Register */
+#define MII_DM9161_ACR 16 /* Aux. Config Register */
+#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */
+#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */
+#define MII_DM9161_INTR 21 /* Interrupt Register */
+#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */
+#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */
+
+static void dm9161_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000);
+ /* Start autonegotiation */
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_BMCR, 0x1200);
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ*8);
+}
+
+static void dm9161_ack_int(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR);
+}
+
+static void dm9161_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00);
+}
+
+/**********************************************************************************/
+
+static const struct phy_info phy_info[] = {
+ {
+ .id = 0x00181b88,
+ .name = "DM9161",
+ .startup = dm9161_startup,
+ .ack_int = dm9161_ack_int,
+ .shutdown = dm9161_shutdown,
+ }, {
+ .id = 0,
+ .name = "GENERIC",
+ .startup = generic_startup,
+ .shutdown = generic_shutdown,
+ },
+};
+
+/**********************************************************************************/
+
+static int phy_id_detect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ int i, r, start, end, phytype, physubtype;
+ const struct phy_info *phy;
+ int phy_hwid, phy_id;
+
+ phy_hwid = -1;
+ fep->phy = NULL;
+
+ /* auto-detect? */
+ if (fpi->phy_addr == -1) {
+ start = 1;
+ end = 32;
+ } else { /* direct */
+ start = fpi->phy_addr;
+ end = start + 1;
+ }
+
+ for (phy_id = start; phy_id < end; phy_id++) {
+ /* skip already used phy addresses on this bus */
+ if (bus->usage_map & (1 << phy_id))
+ continue;
+ r = fs_mii_read(dev, phy_id, MII_PHYSID1);
+ if (r == -1 || (phytype = (r & 0xffff)) == 0xffff)
+ continue;
+ r = fs_mii_read(dev, phy_id, MII_PHYSID2);
+ if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff)
+ continue;
+ phy_hwid = (phytype << 16) | physubtype;
+ if (phy_hwid != -1)
+ break;
+ }
+
+ if (phy_hwid == -1) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s No PHY detected! range=0x%02x-0x%02x\n",
+ dev->name, start, end);
+ return -1;
+ }
+
+ for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++)
+ if (phy->id == (phy_hwid >> 4) || phy->id == 0)
+ break;
+
+ if (i >= ARRAY_SIZE(phy_info)) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s PHY id 0x%08x is not supported!\n",
+ dev->name, phy_hwid);
+ return -1;
+ }
+
+ fep->phy = phy;
+
+ /* mark this address as used */
+ bus->usage_map |= (1 << phy_id);
+
+ printk(KERN_INFO DRV_MODULE_NAME
+ ": %s Phy @ 0x%x, type %s (0x%08x)%s\n",
+ dev->name, phy_id, fep->phy->name, phy_hwid,
+ fpi->phy_addr == -1 ? " (auto-detected)" : "");
+
+ return phy_id;
+}
+
+void fs_mii_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->startup)
+ (*fep->phy->startup) (dev);
+}
+
+void fs_mii_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->shutdown)
+ (*fep->phy->shutdown) (dev);
+}
+
+void fs_mii_ack_int(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->ack_int)
+ (*fep->phy->ack_int) (dev);
+}
+
+#define MII_LINK 0x0001
+#define MII_HALF 0x0002
+#define MII_FULL 0x0004
+#define MII_BASE4 0x0008
+#define MII_10M 0x0010
+#define MII_100M 0x0020
+#define MII_1G 0x0040
+#define MII_10G 0x0080
+
+/* return full mii info at one gulp, with a usable form */
+static unsigned int mii_full_status(struct mii_if_info *mii)
+{
+ unsigned int status;
+ int bmsr, adv, lpa, neg;
+ struct fs_enet_private* fep = netdev_priv(mii->dev);
+
+ /* first, a dummy read, needed to latch some MII phys */
+ (void)mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+ bmsr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+
+ /* no link */
+ if ((bmsr & BMSR_LSTATUS) == 0)
+ return 0;
+
+ status = MII_LINK;
+
+ /* Lets look what ANEG says if it's supported - otherwize we shall
+ take the right values from the platform info*/
+ if(!mii->force_media) {
+ /* autoneg not completed; don't bother */
+ if ((bmsr & BMSR_ANEGCOMPLETE) == 0)
+ return 0;
+
+ adv = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_ADVERTISE);
+ lpa = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_LPA);
+
+ neg = lpa & adv;
+ } else {
+ neg = fep->fpi->bus_info->lpa;
+ }
+
+ if (neg & LPA_100FULL)
+ status |= MII_FULL | MII_100M;
+ else if (neg & LPA_100BASE4)
+ status |= MII_FULL | MII_BASE4 | MII_100M;
+ else if (neg & LPA_100HALF)
+ status |= MII_HALF | MII_100M;
+ else if (neg & LPA_10FULL)
+ status |= MII_FULL | MII_10M;
+ else
+ status |= MII_HALF | MII_10M;
+
+ return status;
+}
+
+void fs_mii_link_status_change_check(struct net_device *dev, int init_media)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct mii_if_info *mii = &fep->mii_if;
+ unsigned int mii_status;
+ int ok_to_print, link, duplex, speed;
+ unsigned long flags;
+
+ ok_to_print = netif_msg_link(fep);
+
+ mii_status = mii_full_status(mii);
+
+ if (!init_media && mii_status == fep->last_mii_status)
+ return;
+
+ fep->last_mii_status = mii_status;
+
+ link = !!(mii_status & MII_LINK);
+ duplex = !!(mii_status & MII_FULL);
+ speed = (mii_status & MII_100M) ? 100 : 10;
+
+ if (link == 0) {
+ netif_carrier_off(mii->dev);
+ netif_stop_queue(dev);
+ if (!init_media) {
+ spin_lock_irqsave(&fep->lock, flags);
+ (*fep->ops->stop)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+ }
+
+ if (ok_to_print)
+ printk(KERN_INFO "%s: link down\n", mii->dev->name);
+
+ } else {
+
+ mii->full_duplex = duplex;
+
+ netif_carrier_on(mii->dev);
+
+ spin_lock_irqsave(&fep->lock, flags);
+ fep->duplex = duplex;
+ fep->speed = speed;
+ (*fep->ops->restart)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ netif_start_queue(dev);
+
+ if (ok_to_print)
+ printk(KERN_INFO "%s: link up, %dMbps, %s-duplex\n",
+ dev->name, speed, duplex ? "full" : "half");
+ }
+}
+
+/**********************************************************************************/
+
+int fs_mii_read(struct net_device *dev, int phy_id, int location)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&bus->mii_lock, flags);
+ ret = (*bus->mii_read)(bus, phy_id, location);
+ spin_unlock_irqrestore(&bus->mii_lock, flags);
+
+ return ret;
+}
+
+void fs_mii_write(struct net_device *dev, int phy_id, int location, int value)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bus->mii_lock, flags);
+ (*bus->mii_write)(bus, phy_id, location, value);
+ spin_unlock_irqrestore(&bus->mii_lock, flags);
+}
+
+/*****************************************************************************/
+
+/* list of all registered mii buses */
+static LIST_HEAD(fs_mii_bus_list);
+
+static struct fs_enet_mii_bus *lookup_bus(int method, int id)
+{
+ struct list_head *ptr;
+ struct fs_enet_mii_bus *bus;
+
+ list_for_each(ptr, &fs_mii_bus_list) {
+ bus = list_entry(ptr, struct fs_enet_mii_bus, list);
+ if (bus->bus_info->method == method &&
+ bus->bus_info->id == id)
+ return bus;
+ }
+ return NULL;
+}
+
+static struct fs_enet_mii_bus *create_bus(const struct fs_mii_bus_info *bi)
+{
+ struct fs_enet_mii_bus *bus;
+ int ret = 0;
+
+ bus = kmalloc(sizeof(*bus), GFP_KERNEL);
+ if (bus == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ memset(bus, 0, sizeof(*bus));
+ spin_lock_init(&bus->mii_lock);
+ bus->bus_info = bi;
+ bus->refs = 0;
+ bus->usage_map = 0;
+
+ /* perform initialization */
+ switch (bi->method) {
+
+ case fsmii_fixed:
+ ret = fs_mii_fixed_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+
+ case fsmii_bitbang:
+ ret = fs_mii_bitbang_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ case fsmii_fec:
+ ret = fs_mii_fec_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+#endif
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+
+ list_add(&bus->list, &fs_mii_bus_list);
+
+ return bus;
+
+err:
+ if (bus)
+ kfree(bus);
+ return ERR_PTR(ret);
+}
+
+static void destroy_bus(struct fs_enet_mii_bus *bus)
+{
+ /* remove from bus list */
+ list_del(&bus->list);
+
+ /* nothing more needed */
+ kfree(bus);
+}
+
+int fs_mii_connect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ struct fs_enet_mii_bus *bus = NULL;
+
+ /* check method validity */
+ switch (fpi->bus_info->method) {
+ case fsmii_fixed:
+ case fsmii_bitbang:
+ break;
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ case fsmii_fec:
+ break;
+#endif
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Unknown MII bus method (%d)!\n",
+ dev->name, fpi->bus_info->method);
+ return -EINVAL;
+ }
+
+ bus = lookup_bus(fpi->bus_info->method, fpi->bus_info->id);
+
+ /* if not found create new bus */
+ if (bus == NULL) {
+ bus = create_bus(fpi->bus_info);
+ if (IS_ERR(bus)) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s MII bus creation failure!\n", dev->name);
+ return PTR_ERR(bus);
+ }
+ }
+
+ bus->refs++;
+
+ fep->mii_bus = bus;
+
+ fep->mii_if.dev = dev;
+ fep->mii_if.phy_id_mask = 0x1f;
+ fep->mii_if.reg_num_mask = 0x1f;
+ fep->mii_if.mdio_read = fs_mii_read;
+ fep->mii_if.mdio_write = fs_mii_write;
+ fep->mii_if.force_media = fpi->bus_info->disable_aneg;
+ fep->mii_if.phy_id = phy_id_detect(dev);
+
+ return 0;
+}
+
+void fs_mii_disconnect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = NULL;
+
+ bus = fep->mii_bus;
+ fep->mii_bus = NULL;
+
+ if (--bus->refs <= 0)
+ destroy_bus(bus);
+}
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
new file mode 100644
index 0000000..1105543
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -0,0 +1,245 @@
+#ifndef FS_ENET_H
+#define FS_ENET_H
+
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/list.h>
+
+#include <linux/fs_enet_pd.h>
+
+#include <asm/dma-mapping.h>
+
+#ifdef CONFIG_CPM1
+#include <asm/commproc.h>
+#endif
+
+#ifdef CONFIG_CPM2
+#include <asm/cpm2.h>
+#endif
+
+/* hw driver ops */
+struct fs_ops {
+ int (*setup_data)(struct net_device *dev);
+ int (*allocate_bd)(struct net_device *dev);
+ void (*free_bd)(struct net_device *dev);
+ void (*cleanup_data)(struct net_device *dev);
+ void (*set_multicast_list)(struct net_device *dev);
+ void (*restart)(struct net_device *dev);
+ void (*stop)(struct net_device *dev);
+ void (*pre_request_irq)(struct net_device *dev, int irq);
+ void (*post_free_irq)(struct net_device *dev, int irq);
+ void (*napi_clear_rx_event)(struct net_device *dev);
+ void (*napi_enable_rx)(struct net_device *dev);
+ void (*napi_disable_rx)(struct net_device *dev);
+ void (*rx_bd_done)(struct net_device *dev);
+ void (*tx_kickstart)(struct net_device *dev);
+ u32 (*get_int_events)(struct net_device *dev);
+ void (*clear_int_events)(struct net_device *dev, u32 int_events);
+ void (*ev_error)(struct net_device *dev, u32 int_events);
+ int (*get_regs)(struct net_device *dev, void *p, int *sizep);
+ int (*get_regs_len)(struct net_device *dev);
+ void (*tx_restart)(struct net_device *dev);
+};
+
+struct phy_info {
+ unsigned int id;
+ const char *name;
+ void (*startup) (struct net_device * dev);
+ void (*shutdown) (struct net_device * dev);
+ void (*ack_int) (struct net_device * dev);
+};
+
+/* The FEC stores dest/src/type, data, and checksum for receive packets.
+ */
+#define MAX_MTU 1508 /* Allow fullsized pppoe packets over VLAN */
+#define MIN_MTU 46 /* this is data size */
+#define CRC_LEN 4
+
+#define PKT_MAXBUF_SIZE (MAX_MTU+ETH_HLEN+CRC_LEN)
+#define PKT_MINBUF_SIZE (MIN_MTU+ETH_HLEN+CRC_LEN)
+
+/* Must be a multiple of 32 (to cover both FEC & FCC) */
+#define PKT_MAXBLR_SIZE ((PKT_MAXBUF_SIZE + 31) & ~31)
+/* This is needed so that invalidate_xxx wont invalidate too much */
+#define ENET_RX_FRSIZE L1_CACHE_ALIGN(PKT_MAXBUF_SIZE)
+
+struct fs_enet_mii_bus {
+ struct list_head list;
+ spinlock_t mii_lock;
+ const struct fs_mii_bus_info *bus_info;
+ int refs;
+ u32 usage_map;
+
+ int (*mii_read)(struct fs_enet_mii_bus *bus,
+ int phy_id, int location);
+
+ void (*mii_write)(struct fs_enet_mii_bus *bus,
+ int phy_id, int location, int value);
+
+ union {
+ struct {
+ unsigned int mii_speed;
+ void *fecp;
+ } fec;
+
+ struct {
+ /* note that the actual port size may */
+ /* be different; cpm(s) handle it OK */
+ u8 mdio_msk;
+ u8 *mdio_dir;
+ u8 *mdio_dat;
+ u8 mdc_msk;
+ u8 *mdc_dir;
+ u8 *mdc_dat;
+ } bitbang;
+
+ struct {
+ u16 lpa;
+ } fixed;
+ };
+};
+
+int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus);
+int fs_mii_fixed_init(struct fs_enet_mii_bus *bus);
+int fs_mii_fec_init(struct fs_enet_mii_bus *bus);
+
+struct fs_enet_private {
+ struct device *dev; /* pointer back to the device (must be initialized first) */
+ spinlock_t lock; /* during all ops except TX pckt processing */
+ spinlock_t tx_lock; /* during fs_start_xmit and fs_tx */
+ const struct fs_platform_info *fpi;
+ const struct fs_ops *ops;
+ int rx_ring, tx_ring;
+ dma_addr_t ring_mem_addr;
+ void *ring_base;
+ struct sk_buff **rx_skbuff;
+ struct sk_buff **tx_skbuff;
+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
+ cbd_t *tx_bd_base;
+ cbd_t *dirty_tx; /* ring entries to be free()ed. */
+ cbd_t *cur_rx;
+ cbd_t *cur_tx;
+ int tx_free;
+ struct net_device_stats stats;
+ struct timer_list phy_timer_list;
+ const struct phy_info *phy;
+ u32 msg_enable;
+ struct mii_if_info mii_if;
+ unsigned int last_mii_status;
+ struct fs_enet_mii_bus *mii_bus;
+ int interrupt;
+
+ int duplex, speed; /* current settings */
+
+ /* event masks */
+ u32 ev_napi_rx; /* mask of NAPI rx events */
+ u32 ev_rx; /* rx event mask */
+ u32 ev_tx; /* tx event mask */
+ u32 ev_err; /* error event mask */
+
+ u16 bd_rx_empty; /* mask of BD rx empty */
+ u16 bd_rx_err; /* mask of BD rx errors */
+
+ union {
+ struct {
+ int idx; /* FEC1 = 0, FEC2 = 1 */
+ void *fecp; /* hw registers */
+ u32 hthi, htlo; /* state for multicast */
+ } fec;
+
+ struct {
+ int idx; /* FCC1-3 = 0-2 */
+ void *fccp; /* hw registers */
+ void *ep; /* parameter ram */
+ void *fcccp; /* hw registers cont. */
+ void *mem; /* FCC DPRAM */
+ u32 gaddrh, gaddrl; /* group address */
+ } fcc;
+
+ struct {
+ int idx; /* FEC1 = 0, FEC2 = 1 */
+ void *sccp; /* hw registers */
+ void *ep; /* parameter ram */
+ u32 hthi, htlo; /* state for multicast */
+ } scc;
+
+ };
+};
+
+/***************************************************************************/
+
+int fs_mii_read(struct net_device *dev, int phy_id, int location);
+void fs_mii_write(struct net_device *dev, int phy_id, int location, int value);
+
+void fs_mii_startup(struct net_device *dev);
+void fs_mii_shutdown(struct net_device *dev);
+void fs_mii_ack_int(struct net_device *dev);
+
+void fs_mii_link_status_change_check(struct net_device *dev, int init_media);
+
+void fs_init_bds(struct net_device *dev);
+void fs_cleanup_bds(struct net_device *dev);
+
+/***************************************************************************/
+
+#define DRV_MODULE_NAME "fs_enet"
+#define PFX DRV_MODULE_NAME ": "
+#define DRV_MODULE_VERSION "1.0"
+#define DRV_MODULE_RELDATE "Aug 8, 2005"
+
+/***************************************************************************/
+
+int fs_enet_platform_init(void);
+void fs_enet_platform_cleanup(void);
+
+/***************************************************************************/
+
+/* buffer descriptor access macros */
+
+/* access macros */
+#if defined(CONFIG_CPM1)
+/* for a a CPM1 __raw_xxx's are sufficient */
+#define __cbd_out32(addr, x) __raw_writel(x, addr)
+#define __cbd_out16(addr, x) __raw_writew(x, addr)
+#define __cbd_in32(addr) __raw_readl(addr)
+#define __cbd_in16(addr) __raw_readw(addr)
+#else
+/* for others play it safe */
+#define __cbd_out32(addr, x) out_be32(addr, x)
+#define __cbd_out16(addr, x) out_be16(addr, x)
+#define __cbd_in32(addr) in_be32(addr)
+#define __cbd_in16(addr) in_be16(addr)
+#endif
+
+/* write */
+#define CBDW_SC(_cbd, _sc) __cbd_out16(&(_cbd)->cbd_sc, (_sc))
+#define CBDW_DATLEN(_cbd, _datlen) __cbd_out16(&(_cbd)->cbd_datlen, (_datlen))
+#define CBDW_BUFADDR(_cbd, _bufaddr) __cbd_out32(&(_cbd)->cbd_bufaddr, (_bufaddr))
+
+/* read */
+#define CBDR_SC(_cbd) __cbd_in16(&(_cbd)->cbd_sc)
+#define CBDR_DATLEN(_cbd) __cbd_in16(&(_cbd)->cbd_datlen)
+#define CBDR_BUFADDR(_cbd) __cbd_in32(&(_cbd)->cbd_bufaddr)
+
+/* set bits */
+#define CBDS_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) | (_sc))
+
+/* clear bits */
+#define CBDC_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) & ~(_sc))
+
+/*******************************************************************/
+
+extern const struct fs_ops fs_fec_ops;
+extern const struct fs_ops fs_fcc_ops;
+extern const struct fs_ops fs_scc_ops;
+
+/*******************************************************************/
+
+/* handy pointer to the immap */
+extern void *fs_enet_immap;
+
+/*******************************************************************/
+
+#endif
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
new file mode 100644
index 0000000..a940b96
--- /dev/null
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -0,0 +1,578 @@
+/*
+ * FCC driver for Motorola MPC82xx (PQ2).
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+/* FCC access macros */
+
+#define __fcc_out32(addr, x) out_be32((unsigned *)addr, x)
+#define __fcc_out16(addr, x) out_be16((unsigned short *)addr, x)
+#define __fcc_out8(addr, x) out_8((unsigned char *)addr, x)
+#define __fcc_in32(addr) in_be32((unsigned *)addr)
+#define __fcc_in16(addr) in_be16((unsigned short *)addr)
+#define __fcc_in8(addr) in_8((unsigned char *)addr)
+
+/* parameter space */
+
+/* write, read, set bits, clear bits */
+#define W32(_p, _m, _v) __fcc_out32(&(_p)->_m, (_v))
+#define R32(_p, _m) __fcc_in32(&(_p)->_m)
+#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v))
+#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v))
+
+#define W16(_p, _m, _v) __fcc_out16(&(_p)->_m, (_v))
+#define R16(_p, _m) __fcc_in16(&(_p)->_m)
+#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v))
+#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v))
+
+#define W8(_p, _m, _v) __fcc_out8(&(_p)->_m, (_v))
+#define R8(_p, _m) __fcc_in8(&(_p)->_m)
+#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v))
+#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v))
+
+/*************************************************/
+
+#define FCC_MAX_MULTICAST_ADDRS 64
+
+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff))
+#define mk_mii_end 0
+
+#define MAX_CR_CMD_LOOPS 10000
+
+static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 mcn, u32 op)
+{
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ cpm2_map_t *immap = fs_enet_immap;
+ cpm_cpm2_t *cpmp = &immap->im_cpm;
+ u32 v;
+ int i;
+
+ /* Currently I don't know what feature call will look like. But
+ I guess there'd be something like do_cpm_cmd() which will require page & sblock */
+ v = mk_cr_cmd(fpi->cp_page, fpi->cp_block, mcn, op);
+ W32(cpmp, cp_cpcr, v | CPM_CR_FLG);
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((R32(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
+ break;
+
+ if (i >= MAX_CR_CMD_LOOPS) {
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n",
+ __FUNCTION__);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq(pdev, 0);
+
+ /* Attach the memory for the FCC Parameter RAM */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram");
+ fep->fcc.ep = (void *)r->start;
+
+ if (fep->fcc.ep == NULL)
+ return -EINVAL;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs");
+ fep->fcc.fccp = (void *)r->start;
+
+ if (fep->fcc.fccp == NULL)
+ return -EINVAL;
+
+ fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c;
+
+ if (fep->fcc.fcccp == NULL)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define FCC_NAPI_RX_EVENT_MSK (FCC_ENET_RXF | FCC_ENET_RXB)
+#define FCC_RX_EVENT (FCC_ENET_RXF)
+#define FCC_TX_EVENT (FCC_ENET_TXB)
+#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE | FCC_ENET_BSY)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->fcc.idx = fs_get_fcc_index(fpi->fs_no);
+ if ((unsigned int)fep->fcc.idx >= 3) /* max 3 FCCs */
+ return -EINVAL;
+
+ fep->fcc.mem = (void *)fpi->mem_offset;
+
+ if (do_pd_setup(fep) != 0)
+ return -EINVAL;
+
+ fep->ev_napi_rx = FCC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = FCC_RX_EVENT;
+ fep->ev_tx = FCC_TX_EVENT;
+ fep->ev_err = FCC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_base = dma_alloc_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), &fep->ring_mem_addr,
+ GFP_KERNEL);
+ if (fep->ring_base == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ if (fep->ring_base)
+ dma_free_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
+ fep->ring_base, fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ S32(fccp, fcc_fpsmr, FCC_PSMR_PRO);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_enet_t *ep = fep->fcc.ep;
+
+ W32(ep, fen_gaddrh, 0);
+ W32(ep, fen_gaddrl, 0);
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 *mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_enet_t *ep = fep->fcc.ep;
+ u16 taddrh, taddrm, taddrl;
+
+ taddrh = ((u16)mac[5] << 8) | mac[4];
+ taddrm = ((u16)mac[3] << 8) | mac[2];
+ taddrl = ((u16)mac[1] << 8) | mac[0];
+
+ W16(ep, fen_taddrh, taddrh);
+ W16(ep, fen_taddrm, taddrm);
+ W16(ep, fen_taddrl, taddrl);
+ fcc_cr_cmd(fep, 0x0C, CPM_CR_SET_GADDR);
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+ fcc_enet_t *ep = fep->fcc.ep;
+
+ /* clear promiscuous always */
+ C32(fccp, fcc_fpsmr, FCC_PSMR_PRO);
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > FCC_MAX_MULTICAST_ADDRS) {
+
+ W32(ep, fen_gaddrh, 0xffffffff);
+ W32(ep, fen_gaddrl, 0xffffffff);
+ }
+
+ /* read back */
+ fep->fcc.gaddrh = R32(ep, fen_gaddrh);
+ fep->fcc.gaddrl = R32(ep, fen_gaddrl);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+static void restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ fcc_t *fccp = fep->fcc.fccp;
+ fcc_c_t *fcccp = fep->fcc.fcccp;
+ fcc_enet_t *ep = fep->fcc.ep;
+ dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
+ u16 paddrh, paddrm, paddrl;
+ u16 mem_addr;
+ const unsigned char *mac;
+ int i;
+
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+
+ /* clear everything (slow & steady does it) */
+ for (i = 0; i < sizeof(*ep); i++)
+ __fcc_out8((char *)ep + i, 0);
+
+ /* get physical address */
+ rx_bd_base_phys = fep->ring_mem_addr;
+ tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring;
+
+ /* point to bds */
+ W32(ep, fen_genfcc.fcc_rbase, rx_bd_base_phys);
+ W32(ep, fen_genfcc.fcc_tbase, tx_bd_base_phys);
+
+ /* Set maximum bytes per receive buffer.
+ * It must be a multiple of 32.
+ */
+ W16(ep, fen_genfcc.fcc_mrblr, PKT_MAXBLR_SIZE);
+
+ W32(ep, fen_genfcc.fcc_rstate, (CPMFCR_GBL | CPMFCR_EB) << 24);
+ W32(ep, fen_genfcc.fcc_tstate, (CPMFCR_GBL | CPMFCR_EB) << 24);
+
+ /* Allocate space in the reserved FCC area of DPRAM for the
+ * internal buffers. No one uses this space (yet), so we
+ * can do this. Later, we will add resource management for
+ * this area.
+ */
+
+ mem_addr = (u32) fep->fcc.mem; /* de-fixup dpram offset */
+
+ W16(ep, fen_genfcc.fcc_riptr, (mem_addr & 0xffff));
+ W16(ep, fen_genfcc.fcc_tiptr, ((mem_addr + 32) & 0xffff));
+ W16(ep, fen_padptr, mem_addr + 64);
+
+ /* fill with special symbol... */
+ memset(fep->fcc.mem + fpi->dpram_offset + 64, 0x88, 32);
+
+ W32(ep, fen_genfcc.fcc_rbptr, 0);
+ W32(ep, fen_genfcc.fcc_tbptr, 0);
+ W32(ep, fen_genfcc.fcc_rcrc, 0);
+ W32(ep, fen_genfcc.fcc_tcrc, 0);
+ W16(ep, fen_genfcc.fcc_res1, 0);
+ W32(ep, fen_genfcc.fcc_res2, 0);
+
+ /* no CAM */
+ W32(ep, fen_camptr, 0);
+
+ /* Set CRC preset and mask */
+ W32(ep, fen_cmask, 0xdebb20e3);
+ W32(ep, fen_cpres, 0xffffffff);
+
+ W32(ep, fen_crcec, 0); /* CRC Error counter */
+ W32(ep, fen_alec, 0); /* alignment error counter */
+ W32(ep, fen_disfc, 0); /* discard frame counter */
+ W16(ep, fen_retlim, 15); /* Retry limit threshold */
+ W16(ep, fen_pper, 0); /* Normal persistence */
+
+ /* set group address */
+ W32(ep, fen_gaddrh, fep->fcc.gaddrh);
+ W32(ep, fen_gaddrl, fep->fcc.gaddrh);
+
+ /* Clear hash filter tables */
+ W32(ep, fen_iaddrh, 0);
+ W32(ep, fen_iaddrl, 0);
+
+ /* Clear the Out-of-sequence TxBD */
+ W16(ep, fen_tfcstat, 0);
+ W16(ep, fen_tfclen, 0);
+ W32(ep, fen_tfcptr, 0);
+
+ W16(ep, fen_mflr, PKT_MAXBUF_SIZE); /* maximum frame length register */
+ W16(ep, fen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */
+
+ /* set address */
+ mac = dev->dev_addr;
+ paddrh = ((u16)mac[5] << 8) | mac[4];
+ paddrm = ((u16)mac[3] << 8) | mac[2];
+ paddrl = ((u16)mac[1] << 8) | mac[0];
+
+ W16(ep, fen_paddrh, paddrh);
+ W16(ep, fen_paddrm, paddrm);
+ W16(ep, fen_paddrl, paddrl);
+
+ W16(ep, fen_taddrh, 0);
+ W16(ep, fen_taddrm, 0);
+ W16(ep, fen_taddrl, 0);
+
+ W16(ep, fen_maxd1, 1520); /* maximum DMA1 length */
+ W16(ep, fen_maxd2, 1520); /* maximum DMA2 length */
+
+ /* Clear stat counters, in case we ever enable RMON */
+ W32(ep, fen_octc, 0);
+ W32(ep, fen_colc, 0);
+ W32(ep, fen_broc, 0);
+ W32(ep, fen_mulc, 0);
+ W32(ep, fen_uspc, 0);
+ W32(ep, fen_frgc, 0);
+ W32(ep, fen_ospc, 0);
+ W32(ep, fen_jbrc, 0);
+ W32(ep, fen_p64c, 0);
+ W32(ep, fen_p65c, 0);
+ W32(ep, fen_p128c, 0);
+ W32(ep, fen_p256c, 0);
+ W32(ep, fen_p512c, 0);
+ W32(ep, fen_p1024c, 0);
+
+ W16(ep, fen_rfthr, 0); /* Suggested by manual */
+ W16(ep, fen_rfcnt, 0);
+ W16(ep, fen_cftype, 0);
+
+ fs_init_bds(dev);
+
+ /* adjust to speed (for RMII mode) */
+ if (fpi->use_rmii) {
+ if (fep->speed == 100)
+ C8(fcccp, fcc_gfemr, 0x20);
+ else
+ S8(fcccp, fcc_gfemr, 0x20);
+ }
+
+ fcc_cr_cmd(fep, 0x0c, CPM_CR_INIT_TRX);
+
+ /* clear events */
+ W16(fccp, fcc_fcce, 0xffff);
+
+ /* Enable interrupts we wish to service */
+ W16(fccp, fcc_fccm, FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB);
+
+ /* Set GFMR to enable Ethernet operating mode */
+ W32(fccp, fcc_gfmr, FCC_GFMR_TCI | FCC_GFMR_MODE_ENET);
+
+ /* set sync/delimiters */
+ W16(fccp, fcc_fdsr, 0xd555);
+
+ W32(fccp, fcc_fpsmr, FCC_PSMR_ENCRC);
+
+ if (fpi->use_rmii)
+ S32(fccp, fcc_fpsmr, FCC_PSMR_RMII);
+
+ /* adjust to duplex mode */
+ if (fep->duplex)
+ S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
+ else
+ C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
+
+ S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ /* stop ethernet */
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+
+ /* clear events */
+ W16(fccp, fcc_fcce, 0xffff);
+
+ /* clear interrupt mask */
+ W16(fccp, fcc_fccm, 0);
+
+ fs_cleanup_bds(dev);
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ W16(fccp, fcc_fcce, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ S16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ C16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ return (u32)R16(fccp, fcc_fcce);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ W16(fccp, fcc_fcce, int_events & 0xffff);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FS_ENET ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->fcc.fccp, sizeof(fcc_t));
+ p = (char *)p + sizeof(fcc_t);
+
+ memcpy_fromio(p, fep->fcc.fcccp, sizeof(fcc_c_t));
+ p = (char *)p + sizeof(fcc_c_t);
+
+ memcpy_fromio(p, fep->fcc.ep, sizeof(fcc_enet_t));
+
+ return 0;
+}
+
+int get_regs_len(struct net_device *dev)
+{
+ return sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t);
+}
+
+/* Some transmit errors cause the transmitter to shut
+ * down. We now issue a restart transmit. Since the
+ * errors close the BD and update the pointers, the restart
+ * _should_ pick up without having to reset any of our
+ * pointers either. Also, To workaround 8260 device erratum
+ * CPM37, we must disable and then re-enable the transmitter
+ * following a Late Collision, Underrun, or Retry Limit error.
+ */
+void tx_restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENT);
+ udelay(10);
+ S32(fccp, fcc_gfmr, FCC_GFMR_ENT);
+
+ fcc_cr_cmd(fep, 0x0C, CPM_CR_RESTART_TX);
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_fcc_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
new file mode 100644
index 0000000..5ef4e84
--- /dev/null
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -0,0 +1,653 @@
+/*
+ * Freescale Ethernet controllers
+ *
+ * Copyright (c) 2005 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+#endif
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+#if defined(CONFIG_CPM1)
+/* for a CPM1 __raw_xxx's are sufficient */
+#define __fs_out32(addr, x) __raw_writel(x, addr)
+#define __fs_out16(addr, x) __raw_writew(x, addr)
+#define __fs_in32(addr) __raw_readl(addr)
+#define __fs_in16(addr) __raw_readw(addr)
+#else
+/* for others play it safe */
+#define __fs_out32(addr, x) out_be32(addr, x)
+#define __fs_out16(addr, x) out_be16(addr, x)
+#define __fs_in32(addr) in_be32(addr)
+#define __fs_in16(addr) in_be16(addr)
+#endif
+
+/* write */
+#define FW(_fecp, _reg, _v) __fs_out32(&(_fecp)->fec_ ## _reg, (_v))
+
+/* read */
+#define FR(_fecp, _reg) __fs_in32(&(_fecp)->fec_ ## _reg)
+
+/* set bits */
+#define FS(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) | (_v))
+
+/* clear bits */
+#define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v))
+
+
+/* CRC polynomium used by the FEC for the multicast group filtering */
+#define FEC_CRC_POLY 0x04C11DB7
+
+#define FEC_MAX_MULTICAST_ADDRS 64
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */
+#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */
+#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */
+#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */
+#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */
+#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */
+#define FEC_ENET_RXF 0x02000000U /* Full frame received */
+#define FEC_ENET_RXB 0x01000000U /* A buffer was received */
+#define FEC_ENET_MII 0x00800000U /* MII interrupt */
+#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */
+
+#define FEC_ECNTRL_PINMUX 0x00000004
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+#define FEC_ECNTRL_RESET 0x00000001
+
+#define FEC_RCNTRL_BC_REJ 0x00000010
+#define FEC_RCNTRL_PROM 0x00000008
+#define FEC_RCNTRL_MII_MODE 0x00000004
+#define FEC_RCNTRL_DRT 0x00000002
+#define FEC_RCNTRL_LOOP 0x00000001
+
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_GTS 0x00000001
+
+
+/* Make MII read/write commands for the FEC.
+*/
+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff))
+#define mk_mii_end 0
+
+#define FEC_MII_LOOPS 10000
+
+/*
+ * Delay to wait for FEC reset command to complete (in us)
+ */
+#define FEC_RESET_DELAY 50
+
+static int whack_reset(fec_t * fecp)
+{
+ int i;
+
+ FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
+ for (i = 0; i < FEC_RESET_DELAY; i++) {
+ if ((FR(fecp, ecntrl) & FEC_ECNTRL_RESET) == 0)
+ return 0; /* OK */
+ udelay(1);
+ }
+
+ return -1;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq_byname(pdev,"interrupt");
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ fep->fec.fecp =(void*)r->start;
+
+ if(fep->fec.fecp == NULL)
+ return -EINVAL;
+
+ return 0;
+
+}
+
+#define FEC_NAPI_RX_EVENT_MSK (FEC_ENET_RXF | FEC_ENET_RXB)
+#define FEC_RX_EVENT (FEC_ENET_RXF)
+#define FEC_TX_EVENT (FEC_ENET_TXF)
+#define FEC_ERR_EVENT_MSK (FEC_ENET_HBERR | FEC_ENET_BABR | \
+ FEC_ENET_BABT | FEC_ENET_EBERR)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (do_pd_setup(fep) != 0)
+ return -EINVAL;
+
+ fep->fec.hthi = 0;
+ fep->fec.htlo = 0;
+
+ fep->ev_napi_rx = FEC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = FEC_RX_EVENT;
+ fep->ev_tx = FEC_TX_EVENT;
+ fep->ev_err = FEC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_base = dma_alloc_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), &fep->ring_mem_addr,
+ GFP_KERNEL);
+ if (fep->ring_base == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ if(fep->ring_base)
+ dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring)
+ * sizeof(cbd_t),
+ fep->ring_base,
+ fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FS(fecp, r_cntrl, FEC_RCNTRL_PROM);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->fec.hthi = 0;
+ fep->fec.htlo = 0;
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 *mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ int temp, hash_index, i, j;
+ u32 crc, csrVal;
+ u8 byte, msb;
+
+ crc = 0xffffffff;
+ for (i = 0; i < 6; i++) {
+ byte = mac[i];
+ for (j = 0; j < 8; j++) {
+ msb = crc >> 31;
+ crc <<= 1;
+ if (msb ^ (byte & 0x1))
+ crc ^= FEC_CRC_POLY;
+ byte >>= 1;
+ }
+ }
+
+ temp = (crc & 0x3f) >> 1;
+ hash_index = ((temp & 0x01) << 4) |
+ ((temp & 0x02) << 2) |
+ ((temp & 0x04)) |
+ ((temp & 0x08) >> 2) |
+ ((temp & 0x10) >> 4);
+ csrVal = 1 << hash_index;
+ if (crc & 1)
+ fep->fec.hthi |= csrVal;
+ else
+ fep->fec.htlo |= csrVal;
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > FEC_MAX_MULTICAST_ADDRS) {
+ fep->fec.hthi = 0xffffffffU;
+ fep->fec.htlo = 0xffffffffU;
+ }
+
+ FC(fecp, r_cntrl, FEC_RCNTRL_PROM);
+ FW(fecp, hash_table_high, fep->fec.hthi);
+ FW(fecp, hash_table_low, fep->fec.htlo);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+static void restart(struct net_device *dev)
+{
+#ifdef CONFIG_DUET
+ immap_t *immap = fs_enet_immap;
+ u32 cptr;
+#endif
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+ const struct fs_platform_info *fpi = fep->fpi;
+ dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
+ int r;
+ u32 addrhi, addrlo;
+
+ r = whack_reset(fep->fec.fecp);
+ if (r != 0)
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s FEC Reset FAILED!\n", dev->name);
+
+ /*
+ * Set station address.
+ */
+ addrhi = ((u32) dev->dev_addr[0] << 24) |
+ ((u32) dev->dev_addr[1] << 16) |
+ ((u32) dev->dev_addr[2] << 8) |
+ (u32) dev->dev_addr[3];
+ addrlo = ((u32) dev->dev_addr[4] << 24) |
+ ((u32) dev->dev_addr[5] << 16);
+ FW(fecp, addr_low, addrhi);
+ FW(fecp, addr_high, addrlo);
+
+ /*
+ * Reset all multicast.
+ */
+ FW(fecp, hash_table_high, fep->fec.hthi);
+ FW(fecp, hash_table_low, fep->fec.htlo);
+
+ /*
+ * Set maximum receive buffer size.
+ */
+ FW(fecp, r_buff_size, PKT_MAXBLR_SIZE);
+ FW(fecp, r_hash, PKT_MAXBUF_SIZE);
+
+ /* get physical address */
+ rx_bd_base_phys = fep->ring_mem_addr;
+ tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring;
+
+ /*
+ * Set receive and transmit descriptor base.
+ */
+ FW(fecp, r_des_start, rx_bd_base_phys);
+ FW(fecp, x_des_start, tx_bd_base_phys);
+
+ fs_init_bds(dev);
+
+ /*
+ * Enable big endian and don't care about SDMA FC.
+ */
+ FW(fecp, fun_code, 0x78000000);
+
+ /*
+ * Set MII speed.
+ */
+ FW(fecp, mii_speed, fep->mii_bus->fec.mii_speed);
+
+ /*
+ * Clear any outstanding interrupt.
+ */
+ FW(fecp, ievent, 0xffc0);
+ FW(fecp, ivec, (fep->interrupt / 2) << 29);
+
+
+ /*
+ * adjust to speed (only for DUET & RMII)
+ */
+#ifdef CONFIG_DUET
+ if (fpi->use_rmii) {
+ cptr = in_be32(&immap->im_cpm.cp_cptr);
+ switch (fs_get_fec_index(fpi->fs_no)) {
+ case 0:
+ cptr |= 0x100;
+ if (fep->speed == 10)
+ cptr |= 0x0000010;
+ else if (fep->speed == 100)
+ cptr &= ~0x0000010;
+ break;
+ case 1:
+ cptr |= 0x80;
+ if (fep->speed == 10)
+ cptr |= 0x0000008;
+ else if (fep->speed == 100)
+ cptr &= ~0x0000008;
+ break;
+ default:
+ BUG(); /* should never happen */
+ break;
+ }
+ out_be32(&immap->im_cpm.cp_cptr, cptr);
+ }
+#endif
+
+ FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ /*
+ * adjust to duplex mode
+ */
+ if (fep->duplex) {
+ FC(fecp, r_cntrl, FEC_RCNTRL_DRT);
+ FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */
+ } else {
+ FS(fecp, r_cntrl, FEC_RCNTRL_DRT);
+ FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
+ }
+
+ /*
+ * Enable interrupts we wish to service.
+ */
+ FW(fecp, imask, FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB);
+
+ /*
+ * And last, enable the transmit and receive processing.
+ */
+ FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, r_des_active, 0x01000000);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ int i;
+
+ if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0)
+ return; /* already down */
+
+ FW(fecp, x_cntrl, 0x01); /* Graceful transmit stop */
+ for (i = 0; ((FR(fecp, ievent) & 0x10000000) == 0) &&
+ i < FEC_RESET_DELAY; i++)
+ udelay(1);
+
+ if (i == FEC_RESET_DELAY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FEC timeout on graceful transmit stop\n",
+ dev->name);
+ /*
+ * Disable FEC. Let only MII interrupts.
+ */
+ FW(fecp, imask, 0);
+ FC(fecp, ecntrl, FEC_ECNTRL_ETHER_EN);
+
+ fs_cleanup_bds(dev);
+
+ /* shut down FEC1? that's where the mii bus is */
+ if (fep->fec.idx == 0 && bus->refs > 1 && bi->method == fsmii_fec) {
+ FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, ievent, FEC_ENET_MII);
+ FW(fecp, mii_speed, bus->fec.mii_speed);
+ }
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ immap_t *immap = fs_enet_immap;
+ u32 siel;
+
+ /* SIU interrupt */
+ if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) {
+
+ siel = in_be32(&immap->im_siu_conf.sc_siel);
+ if ((irq & 1) == 0)
+ siel |= (0x80000000 >> irq);
+ else
+ siel &= ~(0x80000000 >> (irq & ~1));
+ out_be32(&immap->im_siu_conf.sc_siel, siel);
+ }
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, ievent, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FS(fecp, imask, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FC(fecp, imask, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, r_des_active, 0x01000000);
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, x_des_active, 0x01000000);
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ return FR(fecp, ievent) & FR(fecp, imask);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, ievent, int_events);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FEC ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(fec_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->fec.fecp, sizeof(fec_t));
+
+ return 0;
+}
+
+int get_regs_len(struct net_device *dev)
+{
+ return sizeof(fec_t);
+}
+
+void tx_restart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_fec_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
+
+/***********************************************************************/
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ fec_t *fecp = bus->fec.fecp;
+ int i, ret = -1;
+
+ if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
+ BUG();
+
+ /* Add PHY address to register command. */
+ FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location));
+
+ for (i = 0; i < FEC_MII_LOOPS; i++)
+ if ((FR(fecp, ievent) & FEC_ENET_MII) != 0)
+ break;
+
+ if (i < FEC_MII_LOOPS) {
+ FW(fecp, ievent, FEC_ENET_MII);
+ ret = FR(fecp, mii_data) & 0xffff;
+ }
+
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int value)
+{
+ fec_t *fecp = bus->fec.fecp;
+ int i;
+
+ /* this must never happen */
+ if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
+ BUG();
+
+ /* Add PHY address to register command. */
+ FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value));
+
+ for (i = 0; i < FEC_MII_LOOPS; i++)
+ if ((FR(fecp, ievent) & FEC_ENET_MII) != 0)
+ break;
+
+ if (i < FEC_MII_LOOPS)
+ FW(fecp, ievent, FEC_ENET_MII);
+}
+
+int fs_mii_fec_init(struct fs_enet_mii_bus *bus)
+{
+ bd_t *bd = (bd_t *)__res;
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ fec_t *fecp;
+
+ if (bi->id != 0)
+ return -1;
+
+ bus->fec.fecp = &((immap_t *)fs_enet_immap)->im_cpm.cp_fec;
+ bus->fec.mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2)
+ & 0x3F) << 1;
+
+ fecp = bus->fec.fecp;
+
+ FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, ievent, FEC_ENET_MII);
+ FW(fecp, mii_speed, bus->fec.mii_speed);
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
new file mode 100644
index 0000000..d8c6e9c
--- /dev/null
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -0,0 +1,524 @@
+/*
+ * Ethernet on Serial Communications Controller (SCC) driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+#endif
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+#if defined(CONFIG_CPM1)
+/* for a 8xx __raw_xxx's are sufficient */
+#define __fs_out32(addr, x) __raw_writel(x, addr)
+#define __fs_out16(addr, x) __raw_writew(x, addr)
+#define __fs_out8(addr, x) __raw_writeb(x, addr)
+#define __fs_in32(addr) __raw_readl(addr)
+#define __fs_in16(addr) __raw_readw(addr)
+#define __fs_in8(addr) __raw_readb(addr)
+#else
+/* for others play it safe */
+#define __fs_out32(addr, x) out_be32(addr, x)
+#define __fs_out16(addr, x) out_be16(addr, x)
+#define __fs_in32(addr) in_be32(addr)
+#define __fs_in16(addr) in_be16(addr)
+#endif
+
+/* write, read, set bits, clear bits */
+#define W32(_p, _m, _v) __fs_out32(&(_p)->_m, (_v))
+#define R32(_p, _m) __fs_in32(&(_p)->_m)
+#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v))
+#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v))
+
+#define W16(_p, _m, _v) __fs_out16(&(_p)->_m, (_v))
+#define R16(_p, _m) __fs_in16(&(_p)->_m)
+#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v))
+#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v))
+
+#define W8(_p, _m, _v) __fs_out8(&(_p)->_m, (_v))
+#define R8(_p, _m) __fs_in8(&(_p)->_m)
+#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v))
+#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v))
+
+#define SCC_MAX_MULTICAST_ADDRS 64
+
+/*
+ * Delay to wait for SCC reset command to complete (in us)
+ */
+#define SCC_RESET_DELAY 50
+#define MAX_CR_CMD_LOOPS 10000
+
+static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op)
+{
+ cpm8xx_t *cpmp = &((immap_t *)fs_enet_immap)->im_cpm;
+ u32 v, ch;
+ int i = 0;
+
+ ch = fep->scc.idx << 2;
+ v = mk_cr_cmd(ch, op);
+ W16(cpmp, cp_cpcr, v | CPM_CR_FLG);
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((R16(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
+ break;
+
+ if (i >= MAX_CR_CMD_LOOPS) {
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n",
+ __FUNCTION__);
+ return 1;
+ }
+ return 0;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq_byname(pdev, "interrupt");
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ fep->scc.sccp = (void *)r->start;
+
+ if (fep->scc.sccp == NULL)
+ return -EINVAL;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram");
+ fep->scc.ep = (void *)r->start;
+
+ if (fep->scc.ep == NULL)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define SCC_NAPI_RX_EVENT_MSK (SCCE_ENET_RXF | SCCE_ENET_RXB)
+#define SCC_RX_EVENT (SCCE_ENET_RXF)
+#define SCC_TX_EVENT (SCCE_ENET_TXB)
+#define SCC_ERR_EVENT_MSK (SCCE_ENET_TXE | SCCE_ENET_BSY)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->scc.idx = fs_get_scc_index(fpi->fs_no);
+ if ((unsigned int)fep->fcc.idx > 4) /* max 4 SCCs */
+ return -EINVAL;
+
+ do_pd_setup(fep);
+
+ fep->scc.hthi = 0;
+ fep->scc.htlo = 0;
+
+ fep->ev_napi_rx = SCC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = SCC_RX_EVENT;
+ fep->ev_tx = SCC_TX_EVENT;
+ fep->ev_err = SCC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_mem_addr = cpm_dpalloc((fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), 8);
+ if (IS_DPERR(fep->ring_mem_addr))
+ return -ENOMEM;
+
+ fep->ring_base = cpm_dpram_addr(fep->ring_mem_addr);
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->ring_base)
+ cpm_dpfree(fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ S16(sccp, scc_psmr, SCC_PSMR_PRO);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_enet_t *ep = fep->scc.ep;
+
+ W16(ep, sen_gaddr1, 0);
+ W16(ep, sen_gaddr2, 0);
+ W16(ep, sen_gaddr3, 0);
+ W16(ep, sen_gaddr4, 0);
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 * mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_enet_t *ep = fep->scc.ep;
+ u16 taddrh, taddrm, taddrl;
+
+ taddrh = ((u16) mac[5] << 8) | mac[4];
+ taddrm = ((u16) mac[3] << 8) | mac[2];
+ taddrl = ((u16) mac[1] << 8) | mac[0];
+
+ W16(ep, sen_taddrh, taddrh);
+ W16(ep, sen_taddrm, taddrm);
+ W16(ep, sen_taddrl, taddrl);
+ scc_cr_cmd(fep, CPM_CR_SET_GADDR);
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ scc_enet_t *ep = fep->scc.ep;
+
+ /* clear promiscuous always */
+ C16(sccp, scc_psmr, SCC_PSMR_PRO);
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > SCC_MAX_MULTICAST_ADDRS) {
+
+ W16(ep, sen_gaddr1, 0xffff);
+ W16(ep, sen_gaddr2, 0xffff);
+ W16(ep, sen_gaddr3, 0xffff);
+ W16(ep, sen_gaddr4, 0xffff);
+ }
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+/*
+ * This function is called to start or restart the FEC during a link
+ * change. This only happens when switching between half and full
+ * duplex.
+ */
+static void restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ scc_enet_t *ep = fep->scc.ep;
+ const struct fs_platform_info *fpi = fep->fpi;
+ u16 paddrh, paddrm, paddrl;
+ const unsigned char *mac;
+ int i;
+
+ C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* clear everything (slow & steady does it) */
+ for (i = 0; i < sizeof(*ep); i++)
+ __fs_out8((char *)ep + i, 0);
+
+ /* point to bds */
+ W16(ep, sen_genscc.scc_rbase, fep->ring_mem_addr);
+ W16(ep, sen_genscc.scc_tbase,
+ fep->ring_mem_addr + sizeof(cbd_t) * fpi->rx_ring);
+
+ /* Initialize function code registers for big-endian.
+ */
+ W8(ep, sen_genscc.scc_rfcr, SCC_EB);
+ W8(ep, sen_genscc.scc_tfcr, SCC_EB);
+
+ /* Set maximum bytes per receive buffer.
+ * This appears to be an Ethernet frame size, not the buffer
+ * fragment size. It must be a multiple of four.
+ */
+ W16(ep, sen_genscc.scc_mrblr, 0x5f0);
+
+ /* Set CRC preset and mask.
+ */
+ W32(ep, sen_cpres, 0xffffffff);
+ W32(ep, sen_cmask, 0xdebb20e3);
+
+ W32(ep, sen_crcec, 0); /* CRC Error counter */
+ W32(ep, sen_alec, 0); /* alignment error counter */
+ W32(ep, sen_disfc, 0); /* discard frame counter */
+
+ W16(ep, sen_pads, 0x8888); /* Tx short frame pad character */
+ W16(ep, sen_retlim, 15); /* Retry limit threshold */
+
+ W16(ep, sen_maxflr, 0x5ee); /* maximum frame length register */
+
+ W16(ep, sen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */
+
+ W16(ep, sen_maxd1, 0x000005f0); /* maximum DMA1 length */
+ W16(ep, sen_maxd2, 0x000005f0); /* maximum DMA2 length */
+
+ /* Clear hash tables.
+ */
+ W16(ep, sen_gaddr1, 0);
+ W16(ep, sen_gaddr2, 0);
+ W16(ep, sen_gaddr3, 0);
+ W16(ep, sen_gaddr4, 0);
+ W16(ep, sen_iaddr1, 0);
+ W16(ep, sen_iaddr2, 0);
+ W16(ep, sen_iaddr3, 0);
+ W16(ep, sen_iaddr4, 0);
+
+ /* set address
+ */
+ mac = dev->dev_addr;
+ paddrh = ((u16) mac[5] << 8) | mac[4];
+ paddrm = ((u16) mac[3] << 8) | mac[2];
+ paddrl = ((u16) mac[1] << 8) | mac[0];
+
+ W16(ep, sen_paddrh, paddrh);
+ W16(ep, sen_paddrm, paddrm);
+ W16(ep, sen_paddrl, paddrl);
+
+ W16(ep, sen_pper, 0);
+ W16(ep, sen_taddrl, 0);
+ W16(ep, sen_taddrm, 0);
+ W16(ep, sen_taddrh, 0);
+
+ fs_init_bds(dev);
+
+ scc_cr_cmd(fep, CPM_CR_INIT_TRX);
+
+ W16(sccp, scc_scce, 0xffff);
+
+ /* Enable interrupts we wish to service.
+ */
+ W16(sccp, scc_sccm, SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
+
+ /* Set GSMR_H to enable all normal operating modes.
+ * Set GSMR_L to enable Ethernet to MC68160.
+ */
+ W32(sccp, scc_gsmrh, 0);
+ W32(sccp, scc_gsmrl,
+ SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 |
+ SCC_GSMRL_MODE_ENET);
+
+ /* Set sync/delimiters.
+ */
+ W16(sccp, scc_dsr, 0xd555);
+
+ /* Set processing mode. Use Ethernet CRC, catch broadcast, and
+ * start frame search 22 bit times after RENA.
+ */
+ W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
+
+ /* Set full duplex mode if needed */
+ if (fep->duplex)
+ S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE);
+
+ S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ int i;
+
+ for (i = 0; (R16(sccp, scc_sccm) == 0) && i < SCC_RESET_DELAY; i++)
+ udelay(1);
+
+ if (i == SCC_RESET_DELAY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s SCC timeout on graceful transmit stop\n",
+ dev->name);
+
+ W16(sccp, scc_sccm, 0);
+ C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ fs_cleanup_bds(dev);
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ immap_t *immap = fs_enet_immap;
+ u32 siel;
+
+ /* SIU interrupt */
+ if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) {
+
+ siel = in_be32(&immap->im_siu_conf.sc_siel);
+ if ((irq & 1) == 0)
+ siel |= (0x80000000 >> irq);
+ else
+ siel &= ~(0x80000000 >> (irq & ~1));
+ out_be32(&immap->im_siu_conf.sc_siel, siel);
+ }
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ W16(sccp, scc_scce, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ S16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ C16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ return (u32) R16(sccp, scc_scce);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ W16(sccp, scc_scce, int_events & 0xffff);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s SCC ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+static int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(scc_t) + sizeof(scc_enet_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->scc.sccp, sizeof(scc_t));
+ p = (char *)p + sizeof(scc_t);
+
+ memcpy_fromio(p, fep->scc.ep, sizeof(scc_enet_t));
+
+ return 0;
+}
+
+static int get_regs_len(struct net_device *dev)
+{
+ return sizeof(scc_t) + sizeof(scc_enet_t);
+}
+
+static void tx_restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ scc_cr_cmd(fep, CPM_CR_RESTART_TX);
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_scc_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
new file mode 100644
index 0000000..24a5e2e
--- /dev/null
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -0,0 +1,405 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+#ifdef CONFIG_8xx
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+ immap_t *im = (immap_t *)fs_enet_immap;
+ void *dir, *dat, *ppar;
+ int adv;
+ u8 msk;
+
+ switch (port) {
+ case fsiop_porta:
+ dir = &im->im_ioport.iop_padir;
+ dat = &im->im_ioport.iop_padat;
+ ppar = &im->im_ioport.iop_papar;
+ break;
+
+ case fsiop_portb:
+ dir = &im->im_cpm.cp_pbdir;
+ dat = &im->im_cpm.cp_pbdat;
+ ppar = &im->im_cpm.cp_pbpar;
+ break;
+
+ case fsiop_portc:
+ dir = &im->im_ioport.iop_pcdir;
+ dat = &im->im_ioport.iop_pcdat;
+ ppar = &im->im_ioport.iop_pcpar;
+ break;
+
+ case fsiop_portd:
+ dir = &im->im_ioport.iop_pddir;
+ dat = &im->im_ioport.iop_pddat;
+ ppar = &im->im_ioport.iop_pdpar;
+ break;
+
+ case fsiop_porte:
+ dir = &im->im_cpm.cp_pedir;
+ dat = &im->im_cpm.cp_pedat;
+ ppar = &im->im_cpm.cp_pepar;
+ break;
+
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ "Illegal port value %d!\n", port);
+ return -EINVAL;
+ }
+
+ adv = bit >> 3;
+ dir = (char *)dir + adv;
+ dat = (char *)dat + adv;
+ ppar = (char *)ppar + adv;
+
+ msk = 1 << (7 - (bit & 7));
+ if ((in_8(ppar) & msk) != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ "pin %d on port %d is not general purpose!\n", bit, port);
+ return -EINVAL;
+ }
+
+ *dirp = dir;
+ *datp = dat;
+ *mskp = msk;
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_8260
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+ iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport;
+ void *dir, *dat, *ppar;
+ int adv;
+ u8 msk;
+
+ switch (port) {
+ case fsiop_porta:
+ dir = &io->iop_pdira;
+ dat = &io->iop_pdata;
+ ppar = &io->iop_ppara;
+ break;
+
+ case fsiop_portb:
+ dir = &io->iop_pdirb;
+ dat = &io->iop_pdatb;
+ ppar = &io->iop_pparb;
+ break;
+
+ case fsiop_portc:
+ dir = &io->iop_pdirc;
+ dat = &io->iop_pdatc;
+ ppar = &io->iop_pparc;
+ break;
+
+ case fsiop_portd:
+ dir = &io->iop_pdird;
+ dat = &io->iop_pdatd;
+ ppar = &io->iop_ppard;
+ break;
+
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ "Illegal port value %d!\n", port);
+ return -EINVAL;
+ }
+
+ adv = bit >> 3;
+ dir = (char *)dir + adv;
+ dat = (char *)dat + adv;
+ ppar = (char *)ppar + adv;
+
+ msk = 1 << (7 - (bit & 7));
+ if ((in_8(ppar) & msk) != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ "pin %d on port %d is not general purpose!\n", bit, port);
+ return -EINVAL;
+ }
+
+ *dirp = dir;
+ *datp = dat;
+ *mskp = msk;
+
+ return 0;
+}
+#endif
+
+static inline void bb_set(u8 *p, u8 m)
+{
+ out_8(p, in_8(p) | m);
+}
+
+static inline void bb_clr(u8 *p, u8 m)
+{
+ out_8(p, in_8(p) & ~m);
+}
+
+static inline int bb_read(u8 *p, u8 m)
+{
+ return (in_8(p) & m) != 0;
+}
+
+static inline void mdio_active(struct fs_enet_mii_bus *bus)
+{
+ bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
+{
+ bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline int mdio_read(struct fs_enet_mii_bus *bus)
+{
+ return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio(struct fs_enet_mii_bus *bus, int what)
+{
+ if (what)
+ bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+ else
+ bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdc(struct fs_enet_mii_bus *bus, int what)
+{
+ if (what)
+ bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+ else
+ bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+}
+
+static inline void mii_delay(struct fs_enet_mii_bus *bus)
+{
+ udelay(bus->bus_info->i.bitbang.delay);
+}
+
+/* Utility to send the preamble, address, and register (common to read and write). */
+static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
+{
+ int j;
+
+ /*
+ * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
+ * The IEEE spec says this is a PHY optional requirement. The AMD
+ * 79C874 requires one after power up and one after a MII communications
+ * error. This means that we are doing more preambles than we need,
+ * but it is safer and will be much more robust.
+ */
+
+ mdio_active(bus);
+ mdio(bus, 1);
+ for (j = 0; j < 32; j++) {
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ }
+
+ /* send the start bit (01) and the read opcode (10) or write (10) */
+ mdc(bus, 0);
+ mdio(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, read);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, !read);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* send the PHY address */
+ for (j = 0; j < 5; j++) {
+ mdc(bus, 0);
+ mdio(bus, (addr & 0x10) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ addr <<= 1;
+ }
+
+ /* send the register address */
+ for (j = 0; j < 5; j++) {
+ mdc(bus, 0);
+ mdio(bus, (reg & 0x10) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ reg <<= 1;
+ }
+}
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ u16 rdreg;
+ int ret, j;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+
+ bitbang_pre(bus, 1, addr, reg);
+
+ /* tri-state our MDIO I/O pin so we can read */
+ mdc(bus, 0);
+ mdio_tristate(bus);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* check the turnaround bit: the PHY should be driving it to zero */
+ if (mdio_read(bus) != 0) {
+ /* PHY didn't drive TA low */
+ for (j = 0; j < 32; j++) {
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ }
+ ret = -1;
+ goto out;
+ }
+
+ mdc(bus, 0);
+ mii_delay(bus);
+
+ /* read 16 bits of register data, MSB first */
+ rdreg = 0;
+ for (j = 0; j < 16; j++) {
+ mdc(bus, 1);
+ mii_delay(bus);
+ rdreg <<= 1;
+ rdreg |= mdio_read(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ }
+
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ ret = rdreg;
+out:
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
+{
+ int j;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+ u16 value = val & 0xffff;
+
+ bitbang_pre(bus, 0, addr, reg);
+
+ /* send the turnaround (10) */
+ mdc(bus, 0);
+ mdio(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* write 16 bits of register data, MSB first */
+ for (j = 0; j < 16; j++) {
+ mdc(bus, 0);
+ mdio(bus, (value & 0x8000) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ value <<= 1;
+ }
+
+ /*
+ * Tri-state the MDIO line.
+ */
+ mdio_tristate(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+}
+
+int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
+{
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ int r;
+
+ r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
+ &bus->bitbang.mdio_dat,
+ &bus->bitbang.mdio_msk,
+ bi->i.bitbang.mdio_port,
+ bi->i.bitbang.mdio_bit);
+ if (r != 0)
+ return r;
+
+ r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
+ &bus->bitbang.mdc_dat,
+ &bus->bitbang.mdc_msk,
+ bi->i.bitbang.mdc_port,
+ bi->i.bitbang.mdc_bit);
+ if (r != 0)
+ return r;
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/fs_enet/mii-fixed.c b/drivers/net/fs_enet/mii-fixed.c
new file mode 100644
index 0000000..b3e192d
--- /dev/null
+++ b/drivers/net/fs_enet/mii-fixed.c
@@ -0,0 +1,92 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+static const u16 mii_regs[7] = {
+ 0x3100,
+ 0x786d,
+ 0x0fff,
+ 0x0fff,
+ 0x01e1,
+ 0x45e1,
+ 0x0003,
+};
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ int ret = 0;
+
+ if ((unsigned int)location >= ARRAY_SIZE(mii_regs))
+ return -1;
+
+ if (location != 5)
+ ret = mii_regs[location];
+ else
+ ret = bus->fixed.lpa;
+
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
+{
+ /* do nothing */
+}
+
+int fs_mii_fixed_init(struct fs_enet_mii_bus *bus)
+{
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+
+ bus->fixed.lpa = 0x45e1; /* default 100Mb, full duplex */
+
+ /* if speed is fixed at 10Mb, remove 100Mb modes */
+ if (bi->i.fixed.speed == 10)
+ bus->fixed.lpa &= ~LPA_100;
+
+ /* if duplex is half, remove full duplex modes */
+ if (bi->i.fixed.duplex == 0)
+ bus->fixed.lpa &= ~LPA_DUPLEX;
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 6518334..ae5a2ed 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -29,12 +29,7 @@
* define the configuration needed by the board are defined in a
* board structure in arch/ppc/platforms (though I do not
* discount the possibility that other architectures could one
- * day be supported. One assumption the driver currently makes
- * is that the PHY is configured in such a way to advertise all
- * capabilities. This is a sensible default, and on certain
- * PHYs, changing this default encounters substantial errata
- * issues. Future versions may remove this requirement, but for
- * now, it is best for the firmware to ensure this is the case.
+ * day be supported.
*
* The Gianfar Ethernet Controller uses a ring of buffer
* descriptors. The beginning is indicated by a register
@@ -47,7 +42,7 @@
* corresponding bit in the IMASK register is also set (if
* interrupt coalescing is active, then the interrupt may not
* happen immediately, but will wait until either a set number
- * of frames or amount of time have passed.). In NAPI, the
+ * of frames or amount of time have passed). In NAPI, the
* interrupt handler will signal there is work to be done, and
* exit. Without NAPI, the packet(s) will be handled
* immediately. Both methods will start at the last known empty
@@ -75,6 +70,7 @@
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
+#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
@@ -97,9 +93,11 @@
#include <linux/version.h>
#include <linux/dma-mapping.h>
#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
#include "gianfar.h"
-#include "gianfar_phy.h"
+#include "gianfar_mii.h"
#define TX_TIMEOUT (1*HZ)
#define SKB_ALLOC_TIMEOUT 1000000
@@ -113,9 +111,8 @@
#endif
const char gfar_driver_name[] = "Gianfar Ethernet";
-const char gfar_driver_version[] = "1.1";
+const char gfar_driver_version[] = "1.2";
-int startup_gfar(struct net_device *dev);
static int gfar_enet_open(struct net_device *dev);
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void gfar_timeout(struct net_device *dev);
@@ -126,17 +123,13 @@
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs);
-static irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static void gfar_phy_change(void *data);
-static void gfar_phy_timer(unsigned long data);
static void adjust_link(struct net_device *dev);
static void init_registers(struct net_device *dev);
static int init_phy(struct net_device *dev);
static int gfar_probe(struct device *device);
static int gfar_remove(struct device *device);
-void free_skb_resources(struct gfar_private *priv);
+static void free_skb_resources(struct gfar_private *priv);
static void gfar_set_multi(struct net_device *dev);
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
#ifdef CONFIG_GFAR_NAPI
@@ -144,7 +137,6 @@
#endif
int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length);
-static void gfar_phy_startup_timer(unsigned long data);
static void gfar_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp);
static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
@@ -162,6 +154,9 @@
else
return 0;
}
+
+/* Set up the ethernet device structure, private data,
+ * and anything else we need before we start */
static int gfar_probe(struct device *device)
{
u32 tempval;
@@ -175,7 +170,7 @@
einfo = (struct gianfar_platform_data *) pdev->dev.platform_data;
- if (einfo == NULL) {
+ if (NULL == einfo) {
printk(KERN_ERR "gfar %d: Missing additional data!\n",
pdev->id);
@@ -185,7 +180,7 @@
/* Create an ethernet device instance */
dev = alloc_etherdev(sizeof (*priv));
- if (dev == NULL)
+ if (NULL == dev)
return -ENOMEM;
priv = netdev_priv(dev);
@@ -207,20 +202,11 @@
priv->regs = (struct gfar *)
ioremap(r->start, sizeof (struct gfar));
- if (priv->regs == NULL) {
+ if (NULL == priv->regs) {
err = -ENOMEM;
goto regs_fail;
}
- /* Set the PHY base address */
- priv->phyregs = (struct gfar *)
- ioremap(einfo->phy_reg_addr, sizeof (struct gfar));
-
- if (priv->phyregs == NULL) {
- err = -ENOMEM;
- goto phy_regs_fail;
- }
-
spin_lock_init(&priv->lock);
dev_set_drvdata(device, dev);
@@ -386,12 +372,10 @@
return 0;
register_fail:
- iounmap((void *) priv->phyregs);
-phy_regs_fail:
iounmap((void *) priv->regs);
regs_fail:
free_netdev(dev);
- return -ENOMEM;
+ return err;
}
static int gfar_remove(struct device *device)
@@ -402,108 +386,41 @@
dev_set_drvdata(device, NULL);
iounmap((void *) priv->regs);
- iounmap((void *) priv->phyregs);
free_netdev(dev);
return 0;
}
-/* Configure the PHY for dev.
- * returns 0 if success. -1 if failure
+/* Initializes driver's PHY state, and attaches to the PHY.
+ * Returns 0 on success.
*/
static int init_phy(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct phy_info *curphy;
- unsigned int timeout = PHY_INIT_TIMEOUT;
- struct gfar *phyregs = priv->phyregs;
- struct gfar_mii_info *mii_info;
- int err;
+ uint gigabit_support =
+ priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
+ SUPPORTED_1000baseT_Full : 0;
+ struct phy_device *phydev;
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
- mii_info = kmalloc(sizeof(struct gfar_mii_info),
- GFP_KERNEL);
+ phydev = phy_connect(dev, priv->einfo->bus_id, &adjust_link, 0);
- if(NULL == mii_info) {
- if (netif_msg_ifup(priv))
- printk(KERN_ERR "%s: Could not allocate mii_info\n",
- dev->name);
- return -ENOMEM;
+ if (IS_ERR(phydev)) {
+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(phydev);
}
- mii_info->speed = SPEED_1000;
- mii_info->duplex = DUPLEX_FULL;
- mii_info->pause = 0;
- mii_info->link = 1;
+ /* Remove any features not supported by the controller */
+ phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
+ phydev->advertising = phydev->supported;
- mii_info->advertising = (ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Full);
- mii_info->autoneg = 1;
-
- spin_lock_init(&mii_info->mdio_lock);
-
- mii_info->mii_id = priv->einfo->phyid;
-
- mii_info->dev = dev;
-
- mii_info->mdio_read = &read_phy_reg;
- mii_info->mdio_write = &write_phy_reg;
-
- priv->mii_info = mii_info;
-
- /* Reset the management interface */
- gfar_write(&phyregs->miimcfg, MIIMCFG_RESET);
-
- /* Setup the MII Mgmt clock speed */
- gfar_write(&phyregs->miimcfg, MIIMCFG_INIT_VALUE);
-
- /* Wait until the bus is free */
- while ((gfar_read(&phyregs->miimind) & MIIMIND_BUSY) &&
- timeout--)
- cpu_relax();
-
- if(timeout <= 0) {
- printk(KERN_ERR "%s: The MII Bus is stuck!\n",
- dev->name);
- err = -1;
- goto bus_fail;
- }
-
- /* get info for this PHY */
- curphy = get_phy_info(priv->mii_info);
-
- if (curphy == NULL) {
- if (netif_msg_ifup(priv))
- printk(KERN_ERR "%s: No PHY found\n", dev->name);
- err = -1;
- goto no_phy;
- }
-
- mii_info->phyinfo = curphy;
-
- /* Run the commands which initialize the PHY */
- if(curphy->init) {
- err = curphy->init(priv->mii_info);
-
- if (err)
- goto phy_init_fail;
- }
+ priv->phydev = phydev;
return 0;
-
-phy_init_fail:
-no_phy:
-bus_fail:
- kfree(mii_info);
-
- return err;
}
static void init_registers(struct net_device *dev)
@@ -603,24 +520,13 @@
struct gfar *regs = priv->regs;
unsigned long flags;
+ phy_stop(priv->phydev);
+
/* Lock it down */
spin_lock_irqsave(&priv->lock, flags);
- /* Tell the kernel the link is down */
- priv->mii_info->link = 0;
- adjust_link(dev);
-
gfar_halt(dev);
- if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
- /* Clear any pending interrupts */
- mii_clear_phy_interrupt(priv->mii_info);
-
- /* Disable PHY Interrupts */
- mii_configure_phy_interrupt(priv->mii_info,
- MII_INTERRUPT_DISABLED);
- }
-
spin_unlock_irqrestore(&priv->lock, flags);
/* Free the IRQs */
@@ -629,13 +535,7 @@
free_irq(priv->interruptTransmit, dev);
free_irq(priv->interruptReceive, dev);
} else {
- free_irq(priv->interruptTransmit, dev);
- }
-
- if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
- free_irq(priv->einfo->interruptPHY, dev);
- } else {
- del_timer_sync(&priv->phy_info_timer);
+ free_irq(priv->interruptTransmit, dev);
}
free_skb_resources(priv);
@@ -649,7 +549,7 @@
/* If there are any tx skbs or rx skbs still around, free them.
* Then free tx_skbuff and rx_skbuff */
-void free_skb_resources(struct gfar_private *priv)
+static void free_skb_resources(struct gfar_private *priv)
{
struct rxbd8 *rxbdp;
struct txbd8 *txbdp;
@@ -770,7 +670,7 @@
(struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
priv->tx_ring_size, GFP_KERNEL);
- if (priv->tx_skbuff == NULL) {
+ if (NULL == priv->tx_skbuff) {
if (netif_msg_ifup(priv))
printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
dev->name);
@@ -785,7 +685,7 @@
(struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
priv->rx_ring_size, GFP_KERNEL);
- if (priv->rx_skbuff == NULL) {
+ if (NULL == priv->rx_skbuff) {
if (netif_msg_ifup(priv))
printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
dev->name);
@@ -879,13 +779,7 @@
}
}
- /* Set up the PHY change work queue */
- INIT_WORK(&priv->tq, gfar_phy_change, dev);
-
- init_timer(&priv->phy_info_timer);
- priv->phy_info_timer.function = &gfar_phy_startup_timer;
- priv->phy_info_timer.data = (unsigned long) priv->mii_info;
- mod_timer(&priv->phy_info_timer, jiffies + HZ);
+ phy_start(priv->phydev);
/* Configure the coalescing support */
if (priv->txcoalescing)
@@ -933,11 +827,6 @@
priv->tx_bd_base,
gfar_read(®s->tbase0));
- if (priv->mii_info->phyinfo->close)
- priv->mii_info->phyinfo->close(priv->mii_info);
-
- kfree(priv->mii_info);
-
return err;
}
@@ -1035,7 +924,7 @@
txbdp->status &= TXBD_WRAP;
/* Set up checksumming */
- if ((dev->features & NETIF_F_IP_CSUM)
+ if ((dev->features & NETIF_F_IP_CSUM)
&& (CHECKSUM_HW == skb->ip_summed)) {
fcb = gfar_add_fcb(skb, txbdp);
gfar_tx_checksum(skb, fcb);
@@ -1103,11 +992,9 @@
struct gfar_private *priv = netdev_priv(dev);
stop_gfar(dev);
- /* Shutdown the PHY */
- if (priv->mii_info->phyinfo->close)
- priv->mii_info->phyinfo->close(priv->mii_info);
-
- kfree(priv->mii_info);
+ /* Disconnect from the PHY */
+ phy_disconnect(priv->phydev);
+ priv->phydev = NULL;
netif_stop_queue(dev);
@@ -1343,7 +1230,7 @@
while ((!skb) && timeout--)
skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT);
- if (skb == NULL)
+ if (NULL == skb)
return NULL;
/* We need the data buffer to be aligned properly. We will reserve
@@ -1490,7 +1377,7 @@
struct gfar_private *priv = netdev_priv(dev);
struct rxfcb *fcb = NULL;
- if (skb == NULL) {
+ if (NULL == skb) {
if (netif_msg_rx_err(priv))
printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name);
priv->stats.rx_dropped++;
@@ -1718,131 +1605,9 @@
return IRQ_HANDLED;
}
-static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct gfar_private *priv = netdev_priv(dev);
-
- /* Clear the interrupt */
- mii_clear_phy_interrupt(priv->mii_info);
-
- /* Disable PHY interrupts */
- mii_configure_phy_interrupt(priv->mii_info,
- MII_INTERRUPT_DISABLED);
-
- /* Schedule the phy change */
- schedule_work(&priv->tq);
-
- return IRQ_HANDLED;
-}
-
-/* Scheduled by the phy_interrupt/timer to handle PHY changes */
-static void gfar_phy_change(void *data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct gfar_private *priv = netdev_priv(dev);
- int result = 0;
-
- /* Delay to give the PHY a chance to change the
- * register state */
- msleep(1);
-
- /* Update the link, speed, duplex */
- result = priv->mii_info->phyinfo->read_status(priv->mii_info);
-
- /* Adjust the known status as long as the link
- * isn't still coming up */
- if((0 == result) || (priv->mii_info->link == 0))
- adjust_link(dev);
-
- /* Reenable interrupts, if needed */
- if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR)
- mii_configure_phy_interrupt(priv->mii_info,
- MII_INTERRUPT_ENABLED);
-}
-
-/* Called every so often on systems that don't interrupt
- * the core for PHY changes */
-static void gfar_phy_timer(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct gfar_private *priv = netdev_priv(dev);
-
- schedule_work(&priv->tq);
-
- mod_timer(&priv->phy_info_timer, jiffies +
- GFAR_PHY_CHANGE_TIME * HZ);
-}
-
-/* Keep trying aneg for some time
- * If, after GFAR_AN_TIMEOUT seconds, it has not
- * finished, we switch to forced.
- * Either way, once the process has completed, we either
- * request the interrupt, or switch the timer over to
- * using gfar_phy_timer to check status */
-static void gfar_phy_startup_timer(unsigned long data)
-{
- int result;
- static int secondary = GFAR_AN_TIMEOUT;
- struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
- struct gfar_private *priv = netdev_priv(mii_info->dev);
-
- /* Configure the Auto-negotiation */
- result = mii_info->phyinfo->config_aneg(mii_info);
-
- /* If autonegotiation failed to start, and
- * we haven't timed out, reset the timer, and return */
- if (result && secondary--) {
- mod_timer(&priv->phy_info_timer, jiffies + HZ);
- return;
- } else if (result) {
- /* Couldn't start autonegotiation.
- * Try switching to forced */
- mii_info->autoneg = 0;
- result = mii_info->phyinfo->config_aneg(mii_info);
-
- /* Forcing failed! Give up */
- if(result) {
- if (netif_msg_link(priv))
- printk(KERN_ERR "%s: Forcing failed!\n",
- mii_info->dev->name);
- return;
- }
- }
-
- /* Kill the timer so it can be restarted */
- del_timer_sync(&priv->phy_info_timer);
-
- /* Grab the PHY interrupt, if necessary/possible */
- if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
- if (request_irq(priv->einfo->interruptPHY,
- phy_interrupt,
- SA_SHIRQ,
- "phy_interrupt",
- mii_info->dev) < 0) {
- if (netif_msg_intr(priv))
- printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n",
- mii_info->dev->name,
- priv->einfo->interruptPHY);
- } else {
- mii_configure_phy_interrupt(priv->mii_info,
- MII_INTERRUPT_ENABLED);
- return;
- }
- }
-
- /* Start the timer again, this time in order to
- * handle a change in status */
- init_timer(&priv->phy_info_timer);
- priv->phy_info_timer.function = &gfar_phy_timer;
- priv->phy_info_timer.data = (unsigned long) mii_info->dev;
- mod_timer(&priv->phy_info_timer, jiffies +
- GFAR_PHY_CHANGE_TIME * HZ);
-}
-
/* Called every time the controller might need to be made
* aware of new link state. The PHY code conveys this
- * information through variables in the priv structure, and this
+ * information through variables in the phydev structure, and this
* function converts those variables into the appropriate
* register values, and can bring down the device if needed.
*/
@@ -1850,84 +1615,68 @@
{
struct gfar_private *priv = netdev_priv(dev);
struct gfar *regs = priv->regs;
- u32 tempval;
- struct gfar_mii_info *mii_info = priv->mii_info;
+ unsigned long flags;
+ struct phy_device *phydev = priv->phydev;
+ int new_state = 0;
- if (mii_info->link) {
+ spin_lock_irqsave(&priv->lock, flags);
+ if (phydev->link) {
+ u32 tempval = gfar_read(®s->maccfg2);
+
/* Now we make sure that we can be in full duplex mode.
* If not, we operate in half-duplex mode. */
- if (mii_info->duplex != priv->oldduplex) {
- if (!(mii_info->duplex)) {
- tempval = gfar_read(®s->maccfg2);
+ if (phydev->duplex != priv->oldduplex) {
+ new_state = 1;
+ if (!(phydev->duplex))
tempval &= ~(MACCFG2_FULL_DUPLEX);
- gfar_write(®s->maccfg2, tempval);
-
- if (netif_msg_link(priv))
- printk(KERN_INFO "%s: Half Duplex\n",
- dev->name);
- } else {
- tempval = gfar_read(®s->maccfg2);
+ else
tempval |= MACCFG2_FULL_DUPLEX;
- gfar_write(®s->maccfg2, tempval);
- if (netif_msg_link(priv))
- printk(KERN_INFO "%s: Full Duplex\n",
- dev->name);
- }
-
- priv->oldduplex = mii_info->duplex;
+ priv->oldduplex = phydev->duplex;
}
- if (mii_info->speed != priv->oldspeed) {
- switch (mii_info->speed) {
+ if (phydev->speed != priv->oldspeed) {
+ new_state = 1;
+ switch (phydev->speed) {
case 1000:
- tempval = gfar_read(®s->maccfg2);
tempval =
((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
- gfar_write(®s->maccfg2, tempval);
break;
case 100:
case 10:
- tempval = gfar_read(®s->maccfg2);
tempval =
((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
- gfar_write(®s->maccfg2, tempval);
break;
default:
if (netif_msg_link(priv))
printk(KERN_WARNING
- "%s: Ack! Speed (%d) is not 10/100/1000!\n",
- dev->name, mii_info->speed);
+ "%s: Ack! Speed (%d) is not 10/100/1000!\n",
+ dev->name, phydev->speed);
break;
}
- if (netif_msg_link(priv))
- printk(KERN_INFO "%s: Speed %dBT\n", dev->name,
- mii_info->speed);
-
- priv->oldspeed = mii_info->speed;
+ priv->oldspeed = phydev->speed;
}
+ gfar_write(®s->maccfg2, tempval);
+
if (!priv->oldlink) {
- if (netif_msg_link(priv))
- printk(KERN_INFO "%s: Link is up\n", dev->name);
+ new_state = 1;
priv->oldlink = 1;
- netif_carrier_on(dev);
netif_schedule(dev);
}
- } else {
- if (priv->oldlink) {
- if (netif_msg_link(priv))
- printk(KERN_INFO "%s: Link is down\n",
- dev->name);
- priv->oldlink = 0;
- priv->oldspeed = 0;
- priv->oldduplex = -1;
- netif_carrier_off(dev);
- }
+ } else if (priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 0;
+ priv->oldspeed = 0;
+ priv->oldduplex = -1;
}
-}
+ if (new_state && netif_msg_link(priv))
+ phy_print_status(phydev);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
/* Update the hash table based on the current list of multicast
* addresses we subscribe to. Also, change the promiscuity of
@@ -2122,12 +1871,23 @@
static int __init gfar_init(void)
{
- return driver_register(&gfar_driver);
+ int err = gfar_mdio_init();
+
+ if (err)
+ return err;
+
+ err = driver_register(&gfar_driver);
+
+ if (err)
+ gfar_mdio_exit();
+
+ return err;
}
static void __exit gfar_exit(void)
{
driver_unregister(&gfar_driver);
+ gfar_mdio_exit();
}
module_init(gfar_init);
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 28af087..c77ca6c 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -17,7 +17,6 @@
*
* Still left to do:
* -Add support for module parameters
- * -Add support for ethtool -s
* -Add patch for ethtool phys id
*/
#ifndef __GIANFAR_H
@@ -37,7 +36,8 @@
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
-#include <linux/fsl_devices.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -48,7 +48,8 @@
#include <linux/workqueue.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
-#include "gianfar_phy.h"
+#include <linux/fsl_devices.h>
+#include "gianfar_mii.h"
/* The maximum number of packets to be handled in one call of gfar_poll */
#define GFAR_DEV_WEIGHT 64
@@ -73,7 +74,7 @@
#define PHY_INIT_TIMEOUT 100000
#define GFAR_PHY_CHANGE_TIME 2
-#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.1, "
+#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.2, "
#define DRV_NAME "gfar-enet"
extern const char gfar_driver_name[];
extern const char gfar_driver_version[];
@@ -578,12 +579,7 @@
u32 hafdup; /* 0x.50c - Half Duplex Register */
u32 maxfrm; /* 0x.510 - Maximum Frame Length Register */
u8 res18[12];
- u32 miimcfg; /* 0x.520 - MII Management Configuration Register */
- u32 miimcom; /* 0x.524 - MII Management Command Register */
- u32 miimadd; /* 0x.528 - MII Management Address Register */
- u32 miimcon; /* 0x.52c - MII Management Control Register */
- u32 miimstat; /* 0x.530 - MII Management Status Register */
- u32 miimind; /* 0x.534 - MII Management Indicator Register */
+ u8 gfar_mii_regs[24]; /* See gianfar_phy.h */
u8 res19[4];
u32 ifstat; /* 0x.53c - Interface Status Register */
u32 macstnaddr1; /* 0x.540 - Station Address Part 1 Register */
@@ -688,9 +684,6 @@
struct gfar *regs; /* Pointer to the GFAR memory mapped Registers */
u32 *hash_regs[16];
int hash_width;
- struct gfar *phyregs;
- struct work_struct tq;
- struct timer_list phy_info_timer;
struct net_device_stats stats; /* linux network statistics */
struct gfar_extra_stats extra_stats;
spinlock_t lock;
@@ -710,7 +703,8 @@
unsigned int interruptError;
struct gianfar_platform_data *einfo;
- struct gfar_mii_info *mii_info;
+ struct phy_device *phydev;
+ struct mii_bus *mii_bus;
int oldspeed;
int oldduplex;
int oldlink;
@@ -732,4 +726,12 @@
extern struct ethtool_ops *gfar_op_array[];
+extern irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
+extern int startup_gfar(struct net_device *dev);
+extern void stop_gfar(struct net_device *dev);
+extern void gfar_halt(struct net_device *dev);
+extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
+ int enable, u32 regnum, u32 read);
+void gfar_setup_stashing(struct net_device *dev);
+
#endif /* __GIANFAR_H */
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index a451de6..68e3578 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -39,17 +39,18 @@
#include <asm/types.h>
#include <asm/uaccess.h>
#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
#include "gianfar.h"
#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
-extern int startup_gfar(struct net_device *dev);
-extern void stop_gfar(struct net_device *dev);
-extern void gfar_halt(struct net_device *dev);
extern void gfar_start(struct net_device *dev);
extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
+#define GFAR_MAX_COAL_USECS 0xffff
+#define GFAR_MAX_COAL_FRAMES 0xff
static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
u64 * buf);
static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf);
@@ -182,38 +183,32 @@
drvinfo->eedump_len = 0;
}
+
+static int gfar_ssettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phydev;
+
+ if (NULL == phydev)
+ return -ENODEV;
+
+ return phy_ethtool_sset(phydev, cmd);
+}
+
+
/* Return the current settings in the ethtool_cmd structure */
static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct gfar_private *priv = netdev_priv(dev);
- uint gigabit_support =
- priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
- SUPPORTED_1000baseT_Full : 0;
- uint gigabit_advert =
- priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
- ADVERTISED_1000baseT_Full: 0;
+ struct phy_device *phydev = priv->phydev;
- cmd->supported = (SUPPORTED_10baseT_Half
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | gigabit_support | SUPPORTED_Autoneg);
-
- /* For now, we always advertise everything */
- cmd->advertising = (ADVERTISED_10baseT_Half
- | ADVERTISED_100baseT_Half
- | ADVERTISED_100baseT_Full
- | gigabit_advert | ADVERTISED_Autoneg);
-
- cmd->speed = priv->mii_info->speed;
- cmd->duplex = priv->mii_info->duplex;
- cmd->port = PORT_MII;
- cmd->phy_address = priv->mii_info->mii_id;
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->autoneg = AUTONEG_ENABLE;
+ if (NULL == phydev)
+ return -ENODEV;
+
cmd->maxtxpkt = priv->txcount;
cmd->maxrxpkt = priv->rxcount;
- return 0;
+ return phy_ethtool_gset(phydev, cmd);
}
/* Return the length of the register structure */
@@ -241,14 +236,14 @@
unsigned int count;
/* The timer is different, depending on the interface speed */
- switch (priv->mii_info->speed) {
- case 1000:
+ switch (priv->phydev->speed) {
+ case SPEED_1000:
count = GFAR_GBIT_TIME;
break;
- case 100:
+ case SPEED_100:
count = GFAR_100_TIME;
break;
- case 10:
+ case SPEED_10:
default:
count = GFAR_10_TIME;
break;
@@ -265,14 +260,14 @@
unsigned int count;
/* The timer is different, depending on the interface speed */
- switch (priv->mii_info->speed) {
- case 1000:
+ switch (priv->phydev->speed) {
+ case SPEED_1000:
count = GFAR_GBIT_TIME;
break;
- case 100:
+ case SPEED_100:
count = GFAR_100_TIME;
break;
- case 10:
+ case SPEED_10:
default:
count = GFAR_10_TIME;
break;
@@ -292,6 +287,9 @@
if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
return -EOPNOTSUPP;
+ if (NULL == priv->phydev)
+ return -ENODEV;
+
cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime);
cvals->rx_max_coalesced_frames = priv->rxcount;
@@ -348,6 +346,22 @@
else
priv->rxcoalescing = 1;
+ if (NULL == priv->phydev)
+ return -ENODEV;
+
+ /* Check the bounds of the values */
+ if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
+ pr_info("Coalescing is limited to %d microseconds\n",
+ GFAR_MAX_COAL_USECS);
+ return -EINVAL;
+ }
+
+ if (cvals->rx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
+ pr_info("Coalescing is limited to %d frames\n",
+ GFAR_MAX_COAL_FRAMES);
+ return -EINVAL;
+ }
+
priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs);
priv->rxcount = cvals->rx_max_coalesced_frames;
@@ -358,6 +372,19 @@
else
priv->txcoalescing = 1;
+ /* Check the bounds of the values */
+ if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
+ pr_info("Coalescing is limited to %d microseconds\n",
+ GFAR_MAX_COAL_USECS);
+ return -EINVAL;
+ }
+
+ if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
+ pr_info("Coalescing is limited to %d frames\n",
+ GFAR_MAX_COAL_FRAMES);
+ return -EINVAL;
+ }
+
priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs);
priv->txcount = cvals->tx_max_coalesced_frames;
@@ -536,6 +563,7 @@
struct ethtool_ops gfar_ethtool_ops = {
.get_settings = gfar_gsettings,
+ .set_settings = gfar_ssettings,
.get_drvinfo = gfar_gdrvinfo,
.get_regs_len = gfar_reglen,
.get_regs = gfar_get_regs,
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
new file mode 100644
index 0000000..1eca1db
--- /dev/null
+++ b/drivers/net/gianfar_mii.c
@@ -0,0 +1,219 @@
+/*
+ * drivers/net/gianfar_mii.c
+ *
+ * Gianfar Ethernet Driver -- MIIM bus implementation
+ * Provides Bus interface for MIIM regs
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <asm/ocp.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "gianfar.h"
+#include "gianfar_mii.h"
+
+/* Write value to the PHY at mii_id at register regnum,
+ * on the bus, waiting until the write is done before returning.
+ * All PHY configuration is done through the TSEC1 MIIM regs */
+int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+{
+ struct gfar_mii *regs = bus->priv;
+
+ /* Set the PHY address and the register address we want to write */
+ gfar_write(®s->miimadd, (mii_id << 8) | regnum);
+
+ /* Write out the value we want */
+ gfar_write(®s->miimcon, value);
+
+ /* Wait for the transaction to finish */
+ while (gfar_read(®s->miimind) & MIIMIND_BUSY)
+ cpu_relax();
+
+ return 0;
+}
+
+/* Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value. Clears miimcom first. All PHY
+ * configuration has to be done through the TSEC1 MIIM regs */
+int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct gfar_mii *regs = bus->priv;
+ u16 value;
+
+ /* Set the PHY address and the register address we want to read */
+ gfar_write(®s->miimadd, (mii_id << 8) | regnum);
+
+ /* Clear miimcom, and then initiate a read */
+ gfar_write(®s->miimcom, 0);
+ gfar_write(®s->miimcom, MII_READ_COMMAND);
+
+ /* Wait for the transaction to finish */
+ while (gfar_read(®s->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
+ cpu_relax();
+
+ /* Grab the value of the register from miimstat */
+ value = gfar_read(®s->miimstat);
+
+ return value;
+}
+
+
+/* Reset the MIIM registers, and wait for the bus to free */
+int gfar_mdio_reset(struct mii_bus *bus)
+{
+ struct gfar_mii *regs = bus->priv;
+ unsigned int timeout = PHY_INIT_TIMEOUT;
+
+ spin_lock_bh(&bus->mdio_lock);
+
+ /* Reset the management interface */
+ gfar_write(®s->miimcfg, MIIMCFG_RESET);
+
+ /* Setup the MII Mgmt clock speed */
+ gfar_write(®s->miimcfg, MIIMCFG_INIT_VALUE);
+
+ /* Wait until the bus is free */
+ while ((gfar_read(®s->miimind) & MIIMIND_BUSY) &&
+ timeout--)
+ cpu_relax();
+
+ spin_unlock_bh(&bus->mdio_lock);
+
+ if(timeout <= 0) {
+ printk(KERN_ERR "%s: The MII Bus is stuck!\n",
+ bus->name);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+
+int gfar_mdio_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gianfar_mdio_data *pdata;
+ struct gfar_mii *regs;
+ struct mii_bus *new_bus;
+ int err = 0;
+
+ if (NULL == dev)
+ return -EINVAL;
+
+ new_bus = kmalloc(sizeof(struct mii_bus), GFP_KERNEL);
+
+ if (NULL == new_bus)
+ return -ENOMEM;
+
+ new_bus->name = "Gianfar MII Bus",
+ new_bus->read = &gfar_mdio_read,
+ new_bus->write = &gfar_mdio_write,
+ new_bus->reset = &gfar_mdio_reset,
+ new_bus->id = pdev->id;
+
+ pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
+
+ if (NULL == pdata) {
+ printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
+ return -ENODEV;
+ }
+
+ /* Set the PHY base address */
+ regs = (struct gfar_mii *) ioremap(pdata->paddr,
+ sizeof (struct gfar_mii));
+
+ if (NULL == regs) {
+ err = -ENOMEM;
+ goto reg_map_fail;
+ }
+
+ new_bus->priv = regs;
+
+ new_bus->irq = pdata->irq;
+
+ new_bus->dev = dev;
+ dev_set_drvdata(dev, new_bus);
+
+ err = mdiobus_register(new_bus);
+
+ if (0 != err) {
+ printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
+ new_bus->name);
+ goto bus_register_fail;
+ }
+
+ return 0;
+
+bus_register_fail:
+ iounmap((void *) regs);
+reg_map_fail:
+ kfree(new_bus);
+
+ return err;
+}
+
+
+int gfar_mdio_remove(struct device *dev)
+{
+ struct mii_bus *bus = dev_get_drvdata(dev);
+
+ mdiobus_unregister(bus);
+
+ dev_set_drvdata(dev, NULL);
+
+ iounmap((void *) (&bus->priv));
+ bus->priv = NULL;
+ kfree(bus);
+
+ return 0;
+}
+
+static struct device_driver gianfar_mdio_driver = {
+ .name = "fsl-gianfar_mdio",
+ .bus = &platform_bus_type,
+ .probe = gfar_mdio_probe,
+ .remove = gfar_mdio_remove,
+};
+
+int __init gfar_mdio_init(void)
+{
+ return driver_register(&gianfar_mdio_driver);
+}
+
+void __exit gfar_mdio_exit(void)
+{
+ driver_unregister(&gianfar_mdio_driver);
+}
diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h
new file mode 100644
index 0000000..56e5665
--- /dev/null
+++ b/drivers/net/gianfar_mii.h
@@ -0,0 +1,45 @@
+/*
+ * drivers/net/gianfar_mii.h
+ *
+ * Gianfar Ethernet Driver -- MII Management Bus Implementation
+ * Driver for the MDIO bus controller in the Gianfar register space
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __GIANFAR_MII_H
+#define __GIANFAR_MII_H
+
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
+
+#define MII_READ_COMMAND 0x00000001
+
+#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \
+ | SUPPORTED_100baseT_Half \
+ | SUPPORTED_100baseT_Full \
+ | SUPPORTED_Autoneg \
+ | SUPPORTED_MII)
+
+struct gfar_mii {
+ u32 miimcfg; /* 0x.520 - MII Management Config Register */
+ u32 miimcom; /* 0x.524 - MII Management Command Register */
+ u32 miimadd; /* 0x.528 - MII Management Address Register */
+ u32 miimcon; /* 0x.52c - MII Management Control Register */
+ u32 miimstat; /* 0x.530 - MII Management Status Register */
+ u32 miimind; /* 0x.534 - MII Management Indicator Register */
+};
+
+int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
+int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
+int __init gfar_mdio_init(void);
+void __exit gfar_mdio_exit(void);
+#endif /* GIANFAR_PHY_H */
diff --git a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c
deleted file mode 100644
index 7c965f2..0000000
--- a/drivers/net/gianfar_phy.c
+++ /dev/null
@@ -1,661 +0,0 @@
-/*
- * drivers/net/gianfar_phy.c
- *
- * Gianfar Ethernet Driver -- PHY handling
- * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
- * Based on 8260_io/fcc_enet.c
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
- *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/crc32.h>
-#include <linux/mii.h>
-
-#include "gianfar.h"
-#include "gianfar_phy.h"
-
-static void config_genmii_advert(struct gfar_mii_info *mii_info);
-static void genmii_setup_forced(struct gfar_mii_info *mii_info);
-static void genmii_restart_aneg(struct gfar_mii_info *mii_info);
-static int gbit_config_aneg(struct gfar_mii_info *mii_info);
-static int genmii_config_aneg(struct gfar_mii_info *mii_info);
-static int genmii_update_link(struct gfar_mii_info *mii_info);
-static int genmii_read_status(struct gfar_mii_info *mii_info);
-u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum);
-void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val);
-
-/* Write value to the PHY for this device to the register at regnum, */
-/* waiting until the write is done before it returns. All PHY */
-/* configuration has to be done through the TSEC1 MIIM regs */
-void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
-{
- struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regbase = priv->phyregs;
-
- /* Set the PHY address and the register address we want to write */
- gfar_write(®base->miimadd, (mii_id << 8) | regnum);
-
- /* Write out the value we want */
- gfar_write(®base->miimcon, value);
-
- /* Wait for the transaction to finish */
- while (gfar_read(®base->miimind) & MIIMIND_BUSY)
- cpu_relax();
-}
-
-/* Reads from register regnum in the PHY for device dev, */
-/* returning the value. Clears miimcom first. All PHY */
-/* configuration has to be done through the TSEC1 MIIM regs */
-int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
-{
- struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regbase = priv->phyregs;
- u16 value;
-
- /* Set the PHY address and the register address we want to read */
- gfar_write(®base->miimadd, (mii_id << 8) | regnum);
-
- /* Clear miimcom, and then initiate a read */
- gfar_write(®base->miimcom, 0);
- gfar_write(®base->miimcom, MII_READ_COMMAND);
-
- /* Wait for the transaction to finish */
- while (gfar_read(®base->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
- cpu_relax();
-
- /* Grab the value of the register from miimstat */
- value = gfar_read(®base->miimstat);
-
- return value;
-}
-
-void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info)
-{
- if(mii_info->phyinfo->ack_interrupt)
- mii_info->phyinfo->ack_interrupt(mii_info);
-}
-
-
-void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts)
-{
- mii_info->interrupts = interrupts;
- if(mii_info->phyinfo->config_intr)
- mii_info->phyinfo->config_intr(mii_info);
-}
-
-
-/* Writes MII_ADVERTISE with the appropriate values, after
- * sanitizing advertise to make sure only supported features
- * are advertised
- */
-static void config_genmii_advert(struct gfar_mii_info *mii_info)
-{
- u32 advertise;
- u16 adv;
-
- /* Only allow advertising what this PHY supports */
- mii_info->advertising &= mii_info->phyinfo->features;
- advertise = mii_info->advertising;
-
- /* Setup standard advertisement */
- adv = phy_read(mii_info, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- phy_write(mii_info, MII_ADVERTISE, adv);
-}
-
-static void genmii_setup_forced(struct gfar_mii_info *mii_info)
-{
- u16 ctrl;
- u32 features = mii_info->phyinfo->features;
-
- ctrl = phy_read(mii_info, MII_BMCR);
-
- ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE);
- ctrl |= BMCR_RESET;
-
- switch(mii_info->speed) {
- case SPEED_1000:
- if(features & (SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full)) {
- ctrl |= BMCR_SPEED1000;
- break;
- }
- mii_info->speed = SPEED_100;
- case SPEED_100:
- if (features & (SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full)) {
- ctrl |= BMCR_SPEED100;
- break;
- }
- mii_info->speed = SPEED_10;
- case SPEED_10:
- if (features & (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full))
- break;
- default: /* Unsupported speed! */
- printk(KERN_ERR "%s: Bad speed!\n",
- mii_info->dev->name);
- break;
- }
-
- phy_write(mii_info, MII_BMCR, ctrl);
-}
-
-
-/* Enable and Restart Autonegotiation */
-static void genmii_restart_aneg(struct gfar_mii_info *mii_info)
-{
- u16 ctl;
-
- ctl = phy_read(mii_info, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(mii_info, MII_BMCR, ctl);
-}
-
-
-static int gbit_config_aneg(struct gfar_mii_info *mii_info)
-{
- u16 adv;
- u32 advertise;
-
- if(mii_info->autoneg) {
- /* Configure the ADVERTISE register */
- config_genmii_advert(mii_info);
- advertise = mii_info->advertising;
-
- adv = phy_read(mii_info, MII_1000BASETCONTROL);
- adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
- MII_1000BASETCONTROL_HALFDUPLEXCAP);
- if (advertise & SUPPORTED_1000baseT_Half)
- adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
- if (advertise & SUPPORTED_1000baseT_Full)
- adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
- phy_write(mii_info, MII_1000BASETCONTROL, adv);
-
- /* Start/Restart aneg */
- genmii_restart_aneg(mii_info);
- } else
- genmii_setup_forced(mii_info);
-
- return 0;
-}
-
-static int marvell_config_aneg(struct gfar_mii_info *mii_info)
-{
- /* The Marvell PHY has an errata which requires
- * that certain registers get written in order
- * to restart autonegotiation */
- phy_write(mii_info, MII_BMCR, BMCR_RESET);
-
- phy_write(mii_info, 0x1d, 0x1f);
- phy_write(mii_info, 0x1e, 0x200c);
- phy_write(mii_info, 0x1d, 0x5);
- phy_write(mii_info, 0x1e, 0);
- phy_write(mii_info, 0x1e, 0x100);
-
- gbit_config_aneg(mii_info);
-
- return 0;
-}
-static int genmii_config_aneg(struct gfar_mii_info *mii_info)
-{
- if (mii_info->autoneg) {
- config_genmii_advert(mii_info);
- genmii_restart_aneg(mii_info);
- } else
- genmii_setup_forced(mii_info);
-
- return 0;
-}
-
-
-static int genmii_update_link(struct gfar_mii_info *mii_info)
-{
- u16 status;
-
- /* Do a fake read */
- phy_read(mii_info, MII_BMSR);
-
- /* Read link and autonegotiation status */
- status = phy_read(mii_info, MII_BMSR);
- if ((status & BMSR_LSTATUS) == 0)
- mii_info->link = 0;
- else
- mii_info->link = 1;
-
- /* If we are autonegotiating, and not done,
- * return an error */
- if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
- return -EAGAIN;
-
- return 0;
-}
-
-static int genmii_read_status(struct gfar_mii_info *mii_info)
-{
- u16 status;
- int err;
-
- /* Update the link, but return if there
- * was an error */
- err = genmii_update_link(mii_info);
- if (err)
- return err;
-
- if (mii_info->autoneg) {
- status = phy_read(mii_info, MII_LPA);
-
- if (status & (LPA_10FULL | LPA_100FULL))
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
- if (status & (LPA_100FULL | LPA_100HALF))
- mii_info->speed = SPEED_100;
- else
- mii_info->speed = SPEED_10;
- mii_info->pause = 0;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-static int marvell_read_status(struct gfar_mii_info *mii_info)
-{
- u16 status;
- int err;
-
- /* Update the link, but return if there
- * was an error */
- err = genmii_update_link(mii_info);
- if (err)
- return err;
-
- /* If the link is up, read the speed and duplex */
- /* If we aren't autonegotiating, assume speeds
- * are as set */
- if (mii_info->autoneg && mii_info->link) {
- int speed;
- status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
-
-#if 0
- /* If speed and duplex aren't resolved,
- * return an error. Isn't this handled
- * by checking aneg?
- */
- if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
- return -EAGAIN;
-#endif
-
- /* Get the duplexity */
- if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
-
- /* Get the speed */
- speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
- switch(speed) {
- case MII_M1011_PHY_SPEC_STATUS_1000:
- mii_info->speed = SPEED_1000;
- break;
- case MII_M1011_PHY_SPEC_STATUS_100:
- mii_info->speed = SPEED_100;
- break;
- default:
- mii_info->speed = SPEED_10;
- break;
- }
- mii_info->pause = 0;
- }
-
- return 0;
-}
-
-
-static int cis820x_read_status(struct gfar_mii_info *mii_info)
-{
- u16 status;
- int err;
-
- /* Update the link, but return if there
- * was an error */
- err = genmii_update_link(mii_info);
- if (err)
- return err;
-
- /* If the link is up, read the speed and duplex */
- /* If we aren't autonegotiating, assume speeds
- * are as set */
- if (mii_info->autoneg && mii_info->link) {
- int speed;
-
- status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
- if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
-
- speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
-
- switch (speed) {
- case MII_CIS8201_AUXCONSTAT_GBIT:
- mii_info->speed = SPEED_1000;
- break;
- case MII_CIS8201_AUXCONSTAT_100:
- mii_info->speed = SPEED_100;
- break;
- default:
- mii_info->speed = SPEED_10;
- break;
- }
- }
-
- return 0;
-}
-
-static int marvell_ack_interrupt(struct gfar_mii_info *mii_info)
-{
- /* Clear the interrupts by reading the reg */
- phy_read(mii_info, MII_M1011_IEVENT);
-
- return 0;
-}
-
-static int marvell_config_intr(struct gfar_mii_info *mii_info)
-{
- if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
- else
- phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
-
- return 0;
-}
-
-static int cis820x_init(struct gfar_mii_info *mii_info)
-{
- phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
- MII_CIS8201_AUXCONSTAT_INIT);
- phy_write(mii_info, MII_CIS8201_EXT_CON1,
- MII_CIS8201_EXTCON1_INIT);
-
- return 0;
-}
-
-static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info)
-{
- phy_read(mii_info, MII_CIS8201_ISTAT);
-
- return 0;
-}
-
-static int cis820x_config_intr(struct gfar_mii_info *mii_info)
-{
- if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
- else
- phy_write(mii_info, MII_CIS8201_IMASK, 0);
-
- return 0;
-}
-
-#define DM9161_DELAY 10
-
-static int dm9161_read_status(struct gfar_mii_info *mii_info)
-{
- u16 status;
- int err;
-
- /* Update the link, but return if there
- * was an error */
- err = genmii_update_link(mii_info);
- if (err)
- return err;
-
- /* If the link is up, read the speed and duplex */
- /* If we aren't autonegotiating, assume speeds
- * are as set */
- if (mii_info->autoneg && mii_info->link) {
- status = phy_read(mii_info, MII_DM9161_SCSR);
- if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
- mii_info->speed = SPEED_100;
- else
- mii_info->speed = SPEED_10;
-
- if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
- }
-
- return 0;
-}
-
-
-static int dm9161_config_aneg(struct gfar_mii_info *mii_info)
-{
- struct dm9161_private *priv = mii_info->priv;
-
- if(0 == priv->resetdone)
- return -EAGAIN;
-
- return 0;
-}
-
-static void dm9161_timer(unsigned long data)
-{
- struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
- struct dm9161_private *priv = mii_info->priv;
- u16 status = phy_read(mii_info, MII_BMSR);
-
- if (status & BMSR_ANEGCOMPLETE) {
- priv->resetdone = 1;
- } else
- mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
-}
-
-static int dm9161_init(struct gfar_mii_info *mii_info)
-{
- struct dm9161_private *priv;
-
- /* Allocate the private data structure */
- priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
-
- if (NULL == priv)
- return -ENOMEM;
-
- mii_info->priv = priv;
-
- /* Reset is not done yet */
- priv->resetdone = 0;
-
- /* Isolate the PHY */
- phy_write(mii_info, MII_BMCR, BMCR_ISOLATE);
-
- /* Do not bypass the scrambler/descrambler */
- phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
-
- /* Clear 10BTCSR to default */
- phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
-
- /* Reconnect the PHY, and enable Autonegotiation */
- phy_write(mii_info, MII_BMCR, BMCR_ANENABLE);
-
- /* Start a timer for DM9161_DELAY seconds to wait
- * for the PHY to be ready */
- init_timer(&priv->timer);
- priv->timer.function = &dm9161_timer;
- priv->timer.data = (unsigned long) mii_info;
- mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
-
- return 0;
-}
-
-static void dm9161_close(struct gfar_mii_info *mii_info)
-{
- struct dm9161_private *priv = mii_info->priv;
-
- del_timer_sync(&priv->timer);
- kfree(priv);
-}
-
-#if 0
-static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info)
-{
- phy_read(mii_info, MII_DM9161_INTR);
-
- return 0;
-}
-#endif
-
-/* Cicada 820x */
-static struct phy_info phy_info_cis820x = {
- 0x000fc440,
- "Cicada Cis8204",
- 0x000fffc0,
- .features = MII_GBIT_FEATURES,
- .init = &cis820x_init,
- .config_aneg = &gbit_config_aneg,
- .read_status = &cis820x_read_status,
- .ack_interrupt = &cis820x_ack_interrupt,
- .config_intr = &cis820x_config_intr,
-};
-
-static struct phy_info phy_info_dm9161 = {
- .phy_id = 0x0181b880,
- .name = "Davicom DM9161E",
- .phy_id_mask = 0x0ffffff0,
- .init = dm9161_init,
- .config_aneg = dm9161_config_aneg,
- .read_status = dm9161_read_status,
- .close = dm9161_close,
-};
-
-static struct phy_info phy_info_marvell = {
- .phy_id = 0x01410c00,
- .phy_id_mask = 0xffffff00,
- .name = "Marvell 88E1101/88E1111",
- .features = MII_GBIT_FEATURES,
- .config_aneg = &marvell_config_aneg,
- .read_status = &marvell_read_status,
- .ack_interrupt = &marvell_ack_interrupt,
- .config_intr = &marvell_config_intr,
-};
-
-static struct phy_info phy_info_genmii= {
- .phy_id = 0x00000000,
- .phy_id_mask = 0x00000000,
- .name = "Generic MII",
- .features = MII_BASIC_FEATURES,
- .config_aneg = genmii_config_aneg,
- .read_status = genmii_read_status,
-};
-
-static struct phy_info *phy_info[] = {
- &phy_info_cis820x,
- &phy_info_marvell,
- &phy_info_dm9161,
- &phy_info_genmii,
- NULL
-};
-
-u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum)
-{
- u16 retval;
- unsigned long flags;
-
- spin_lock_irqsave(&mii_info->mdio_lock, flags);
- retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
- spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
-
- return retval;
-}
-
-void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&mii_info->mdio_lock, flags);
- mii_info->mdio_write(mii_info->dev,
- mii_info->mii_id,
- regnum, val);
- spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
-}
-
-/* Use the PHY ID registers to determine what type of PHY is attached
- * to device dev. return a struct phy_info structure describing that PHY
- */
-struct phy_info * get_phy_info(struct gfar_mii_info *mii_info)
-{
- u16 phy_reg;
- u32 phy_ID;
- int i;
- struct phy_info *theInfo = NULL;
- struct net_device *dev = mii_info->dev;
-
- /* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = phy_read(mii_info, MII_PHYSID1);
- phy_ID = (phy_reg & 0xffff) << 16;
-
- /* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = phy_read(mii_info, MII_PHYSID2);
- phy_ID |= (phy_reg & 0xffff);
-
- /* loop through all the known PHY types, and find one that */
- /* matches the ID we read from the PHY. */
- for (i = 0; phy_info[i]; i++)
- if (phy_info[i]->phy_id ==
- (phy_ID & phy_info[i]->phy_id_mask)) {
- theInfo = phy_info[i];
- break;
- }
-
- /* This shouldn't happen, as we have generic PHY support */
- if (theInfo == NULL) {
- printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
- return NULL;
- } else {
- printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
- phy_ID);
- }
-
- return theInfo;
-}
diff --git a/drivers/net/gianfar_phy.h b/drivers/net/gianfar_phy.h
deleted file mode 100644
index 1e9b3ab..0000000
--- a/drivers/net/gianfar_phy.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * drivers/net/gianfar_phy.h
- *
- * Gianfar Ethernet Driver -- PHY handling
- * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
- * Based on 8260_io/fcc_enet.c
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
- *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifndef __GIANFAR_PHY_H
-#define __GIANFAR_PHY_H
-
-#define MII_end ((u32)-2)
-#define MII_read ((u32)-1)
-
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
-
-#define GFAR_AN_TIMEOUT 2000
-
-/* 1000BT control (Marvell & BCM54xx at least) */
-#define MII_1000BASETCONTROL 0x09
-#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
-#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
-
-/* Cicada Extended Control Register 1 */
-#define MII_CIS8201_EXT_CON1 0x17
-#define MII_CIS8201_EXTCON1_INIT 0x0000
-
-/* Cicada Interrupt Mask Register */
-#define MII_CIS8201_IMASK 0x19
-#define MII_CIS8201_IMASK_IEN 0x8000
-#define MII_CIS8201_IMASK_SPEED 0x4000
-#define MII_CIS8201_IMASK_LINK 0x2000
-#define MII_CIS8201_IMASK_DUPLEX 0x1000
-#define MII_CIS8201_IMASK_MASK 0xf000
-
-/* Cicada Interrupt Status Register */
-#define MII_CIS8201_ISTAT 0x1a
-#define MII_CIS8201_ISTAT_STATUS 0x8000
-#define MII_CIS8201_ISTAT_SPEED 0x4000
-#define MII_CIS8201_ISTAT_LINK 0x2000
-#define MII_CIS8201_ISTAT_DUPLEX 0x1000
-
-/* Cicada Auxiliary Control/Status Register */
-#define MII_CIS8201_AUX_CONSTAT 0x1c
-#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
-#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
-#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
-#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
-#define MII_CIS8201_AUXCONSTAT_100 0x0008
-
-/* 88E1011 PHY Status Register */
-#define MII_M1011_PHY_SPEC_STATUS 0x11
-#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
-#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
-#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
-#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
-#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
-#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
-
-#define MII_M1011_IEVENT 0x13
-#define MII_M1011_IEVENT_CLEAR 0x0000
-
-#define MII_M1011_IMASK 0x12
-#define MII_M1011_IMASK_INIT 0x6400
-#define MII_M1011_IMASK_CLEAR 0x0000
-
-#define MII_DM9161_SCR 0x10
-#define MII_DM9161_SCR_INIT 0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MII_DM9161_SCSR 0x11
-#define MII_DM9161_SCSR_100F 0x8000
-#define MII_DM9161_SCSR_100H 0x4000
-#define MII_DM9161_SCSR_10F 0x2000
-#define MII_DM9161_SCSR_10H 0x1000
-
-/* DM9161 Interrupt Register */
-#define MII_DM9161_INTR 0x15
-#define MII_DM9161_INTR_PEND 0x8000
-#define MII_DM9161_INTR_DPLX_MASK 0x0800
-#define MII_DM9161_INTR_SPD_MASK 0x0400
-#define MII_DM9161_INTR_LINK_MASK 0x0200
-#define MII_DM9161_INTR_MASK 0x0100
-#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
-#define MII_DM9161_INTR_SPD_CHANGE 0x0008
-#define MII_DM9161_INTR_LINK_CHANGE 0x0004
-#define MII_DM9161_INTR_INIT 0x0000
-#define MII_DM9161_INTR_STOP \
-(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
- | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
-
-/* DM9161 10BT Configuration/Status */
-#define MII_DM9161_10BTCSR 0x12
-#define MII_DM9161_10BTCSR_INIT 0x7800
-
-#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
- SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | \
- SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | \
- SUPPORTED_TP | \
- SUPPORTED_MII)
-
-#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | \
- SUPPORTED_1000baseT_Full)
-
-#define MII_READ_COMMAND 0x00000001
-
-#define MII_INTERRUPT_DISABLED 0x0
-#define MII_INTERRUPT_ENABLED 0x1
-/* Taken from mii_if_info and sungem_phy.h */
-struct gfar_mii_info {
- /* Information about the PHY type */
- /* And management functions */
- struct phy_info *phyinfo;
-
- /* forced speed & duplex (no autoneg)
- * partner speed & duplex & pause (autoneg)
- */
- int speed;
- int duplex;
- int pause;
-
- /* The most recently read link state */
- int link;
-
- /* Enabled Interrupts */
- u32 interrupts;
-
- u32 advertising;
- int autoneg;
- int mii_id;
-
- /* private data pointer */
- /* For use by PHYs to maintain extra state */
- void *priv;
-
- /* Provided by host chip */
- struct net_device *dev;
-
- /* A lock to ensure that only one thing can read/write
- * the MDIO bus at a time */
- spinlock_t mdio_lock;
-
- /* Provided by ethernet driver */
- int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
- void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY. During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is. The 32-bit result
- * gotten from the PHY will be ANDed with phy_id_mask to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * There are 6 commands which take a gfar_mii_info structure.
- * Each PHY must declare config_aneg, and read_status.
- */
-struct phy_info {
- u32 phy_id;
- char *name;
- unsigned int phy_id_mask;
- u32 features;
-
- /* Called to initialize the PHY */
- int (*init)(struct gfar_mii_info *mii_info);
-
- /* Called to suspend the PHY for power */
- int (*suspend)(struct gfar_mii_info *mii_info);
-
- /* Reconfigures autonegotiation (or disables it) */
- int (*config_aneg)(struct gfar_mii_info *mii_info);
-
- /* Determines the negotiated speed and duplex */
- int (*read_status)(struct gfar_mii_info *mii_info);
-
- /* Clears any pending interrupts */
- int (*ack_interrupt)(struct gfar_mii_info *mii_info);
-
- /* Enables or disables interrupts */
- int (*config_intr)(struct gfar_mii_info *mii_info);
-
- /* Clears up any memory if needed */
- void (*close)(struct gfar_mii_info *mii_info);
-};
-
-struct phy_info *get_phy_info(struct gfar_mii_info *mii_info);
-int read_phy_reg(struct net_device *dev, int mii_id, int regnum);
-void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value);
-void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info);
-void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts);
-
-struct dm9161_private {
- struct timer_list timer;
- int resetdone;
-};
-
-#endif /* GIANFAR_PHY_H */
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index de087cd..896aa02 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -1,6 +1,7 @@
config MKISS
tristate "Serial port KISS driver"
depends on AX25
+ select CRC16
---help---
KISS is a protocol used for the exchange of data between a computer
and a Terminal Node Controller (a small embedded system commonly
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 1756f0e..cb43a9d 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -144,7 +144,7 @@
{
struct bpqdev *bpq;
- list_for_each_entry(bpq, &bpq_devices, bpq_list) {
+ list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list) {
if (bpq->ethdev == dev)
return bpq->axdev;
}
@@ -399,7 +399,7 @@
if (*pos == 0)
return SEQ_START_TOKEN;
- list_for_each_entry(bpqdev, &bpq_devices, bpq_list) {
+ list_for_each_entry_rcu(bpqdev, &bpq_devices, bpq_list) {
if (i == *pos)
return bpqdev;
}
@@ -418,7 +418,7 @@
p = ((struct bpqdev *)v)->bpq_list.next;
return (p == &bpq_devices) ? NULL
- : list_entry(p, struct bpqdev, bpq_list);
+ : rcu_dereference(list_entry(p, struct bpqdev, bpq_list));
}
static void bpq_seq_stop(struct seq_file *seq, void *v)
@@ -561,8 +561,6 @@
if (!dev_is_ethdev(dev))
return NOTIFY_DONE;
- rcu_read_lock();
-
switch (event) {
case NETDEV_UP: /* new ethernet device -> new BPQ interface */
if (bpq_get_ax25_dev(dev) == NULL)
@@ -581,7 +579,6 @@
default:
break;
}
- rcu_read_unlock();
return NOTIFY_DONE;
}
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index d9fe64b..3e9accf 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -14,13 +14,14 @@
*
* Copyright (C) Hans Alblas PE1AYX <hans@esrac.ele.tue.nl>
* Copyright (C) 2004, 05 Ralf Baechle DL5RB <ralf@linux-mips.org>
+ * Copyright (C) 2004, 05 Thomas Osterried DL9SAU <thomas@x-berg.in-berlin.de>
*/
-
#include <linux/config.h>
#include <linux/module.h>
#include <asm/system.h>
#include <linux/bitops.h>
#include <asm/uaccess.h>
+#include <linux/crc16.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
@@ -39,11 +40,6 @@
#include <net/ax25.h>
-#ifdef CONFIG_INET
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#endif
-
#define AX_MTU 236
/* SLIP/KISS protocol characters. */
@@ -80,9 +76,13 @@
int mode;
int crcmode; /* MW: for FlexNet, SMACK etc. */
-#define CRC_MODE_NONE 0
-#define CRC_MODE_FLEX 1
-#define CRC_MODE_SMACK 2
+ int crcauto; /* CRC auto mode */
+
+#define CRC_MODE_NONE 0
+#define CRC_MODE_FLEX 1
+#define CRC_MODE_SMACK 2
+#define CRC_MODE_FLEX_TEST 3
+#define CRC_MODE_SMACK_TEST 4
atomic_t refcnt;
struct semaphore dead_sem;
@@ -151,6 +151,21 @@
return 0;
}
+static int check_crc_16(unsigned char *cp, int size)
+{
+ unsigned short crc = 0x0000;
+
+ if (size < 3)
+ return -1;
+
+ crc = crc16(0, cp, size);
+
+ if (crc != 0x0000)
+ return -1;
+
+ return 0;
+}
+
/*
* Standard encapsulation
*/
@@ -237,19 +252,42 @@
spin_lock_bh(&ax->buflock);
if (ax->rbuff[0] > 0x0f) {
- if (ax->rbuff[0] & 0x20) {
- ax->crcmode = CRC_MODE_FLEX;
- if (check_crc_flex(ax->rbuff, ax->rcount) < 0) {
- ax->stats.rx_errors++;
+ if (ax->rbuff[0] & 0x80) {
+ if (check_crc_16(ax->rbuff, ax->rcount) < 0) {
+ ax->stats.rx_errors++;
+ spin_unlock_bh(&ax->buflock);
+
return;
}
+ if (ax->crcmode != CRC_MODE_SMACK && ax->crcauto) {
+ printk(KERN_INFO
+ "mkiss: %s: Switchting to crc-smack\n",
+ ax->dev->name);
+ ax->crcmode = CRC_MODE_SMACK;
+ }
ax->rcount -= 2;
- /* dl9sau bugfix: the trailling two bytes flexnet crc
- * will not be passed to the kernel. thus we have
- * to correct the kissparm signature, because it
- * indicates a crc but there's none
+ *ax->rbuff &= ~0x80;
+ } else if (ax->rbuff[0] & 0x20) {
+ if (check_crc_flex(ax->rbuff, ax->rcount) < 0) {
+ ax->stats.rx_errors++;
+ spin_unlock_bh(&ax->buflock);
+ return;
+ }
+ if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) {
+ printk(KERN_INFO
+ "mkiss: %s: Switchting to crc-flexnet\n",
+ ax->dev->name);
+ ax->crcmode = CRC_MODE_FLEX;
+ }
+ ax->rcount -= 2;
+
+ /*
+ * dl9sau bugfix: the trailling two bytes flexnet crc
+ * will not be passed to the kernel. thus we have to
+ * correct the kissparm signature, because it indicates
+ * a crc but there's none
*/
- *ax->rbuff &= ~0x20;
+ *ax->rbuff &= ~0x20;
}
}
spin_unlock_bh(&ax->buflock);
@@ -352,10 +390,8 @@
"MTU change cancelled.\n",
ax->dev->name);
dev->mtu = ax->mtu;
- if (xbuff != NULL)
- kfree(xbuff);
- if (rbuff != NULL)
- kfree(rbuff);
+ kfree(xbuff);
+ kfree(rbuff);
return;
}
@@ -417,20 +453,69 @@
p = icp;
spin_lock_bh(&ax->buflock);
- switch (ax->crcmode) {
- unsigned short crc;
+ if ((*p & 0x0f) != 0) {
+ /* Configuration Command (kissparms(1).
+ * Protocol spec says: never append CRC.
+ * This fixes a very old bug in the linux
+ * kiss driver. -- dl9sau */
+ switch (*p & 0xff) {
+ case 0x85:
+ /* command from userspace especially for us,
+ * not for delivery to the tnc */
+ if (len > 1) {
+ int cmd = (p[1] & 0xff);
+ switch(cmd) {
+ case 3:
+ ax->crcmode = CRC_MODE_SMACK;
+ break;
+ case 2:
+ ax->crcmode = CRC_MODE_FLEX;
+ break;
+ case 1:
+ ax->crcmode = CRC_MODE_NONE;
+ break;
+ case 0:
+ default:
+ ax->crcmode = CRC_MODE_SMACK_TEST;
+ cmd = 0;
+ }
+ ax->crcauto = (cmd ? 0 : 1);
+ printk(KERN_INFO "mkiss: %s: crc mode %s %d\n", ax->dev->name, (len) ? "set to" : "is", cmd);
+ }
+ spin_unlock_bh(&ax->buflock);
+ netif_start_queue(dev);
- case CRC_MODE_FLEX:
- *p |= 0x20;
- crc = calc_crc_flex(p, len);
- count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2);
- break;
+ return;
+ default:
+ count = kiss_esc(p, (unsigned char *)ax->xbuff, len);
+ }
+ } else {
+ unsigned short crc;
+ switch (ax->crcmode) {
+ case CRC_MODE_SMACK_TEST:
+ ax->crcmode = CRC_MODE_FLEX_TEST;
+ printk(KERN_INFO "mkiss: %s: Trying crc-smack\n", ax->dev->name);
+ // fall through
+ case CRC_MODE_SMACK:
+ *p |= 0x80;
+ crc = swab16(crc16(0, p, len));
+ count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2);
+ break;
+ case CRC_MODE_FLEX_TEST:
+ ax->crcmode = CRC_MODE_NONE;
+ printk(KERN_INFO "mkiss: %s: Trying crc-flexnet\n", ax->dev->name);
+ // fall through
+ case CRC_MODE_FLEX:
+ *p |= 0x20;
+ crc = calc_crc_flex(p, len);
+ count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2);
+ break;
- default:
- count = kiss_esc(p, (unsigned char *)ax->xbuff, len);
- break;
- }
-
+ default:
+ count = kiss_esc(p, (unsigned char *)ax->xbuff, len);
+ }
+ }
+
set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags);
actual = ax->tty->driver->write(ax->tty, ax->xbuff, count);
ax->stats.tx_packets++;
@@ -439,8 +524,6 @@
ax->dev->trans_start = jiffies;
ax->xleft = count - actual;
ax->xhead = ax->xbuff + actual;
-
- spin_unlock_bh(&ax->buflock);
}
/* Encapsulate an AX.25 packet and kick it into a TTY queue. */
@@ -622,7 +705,7 @@
* best way to fix this is to use a rwlock in the tty struct, but for now we
* use a single global rwlock for all ttys in ppp line discipline.
*/
-static rwlock_t disc_data_lock = RW_LOCK_UNLOCKED;
+static DEFINE_RWLOCK(disc_data_lock);
static struct mkiss *mkiss_get(struct tty_struct *tty)
{
@@ -643,6 +726,8 @@
up(&ax->dead_sem);
}
+static int crc_force = 0; /* Can be overridden with insmod */
+
static int mkiss_open(struct tty_struct *tty)
{
struct net_device *dev;
@@ -682,6 +767,33 @@
if (register_netdev(dev))
goto out_free_buffers;
+ /* after register_netdev() - because else printk smashes the kernel */
+ switch (crc_force) {
+ case 3:
+ ax->crcmode = CRC_MODE_SMACK;
+ printk(KERN_INFO "mkiss: %s: crc mode smack forced.\n",
+ ax->dev->name);
+ break;
+ case 2:
+ ax->crcmode = CRC_MODE_FLEX;
+ printk(KERN_INFO "mkiss: %s: crc mode flexnet forced.\n",
+ ax->dev->name);
+ break;
+ case 1:
+ ax->crcmode = CRC_MODE_NONE;
+ printk(KERN_INFO "mkiss: %s: crc mode disabled.\n",
+ ax->dev->name);
+ break;
+ case 0:
+ /* fall through */
+ default:
+ crc_force = 0;
+ printk(KERN_INFO "mkiss: %s: crc mode is auto.\n",
+ ax->dev->name);
+ ax->crcmode = CRC_MODE_SMACK_TEST;
+ }
+ ax->crcauto = (crc_force ? 0 : 1);
+
netif_start_queue(dev);
/* Done. We have linked the TTY line to a channel. */
@@ -765,7 +877,6 @@
case SIOCSIFHWADDR: {
char addr[AX25_ADDR_LEN];
-printk(KERN_INFO "In SIOCSIFHWADDR");
if (copy_from_user(&addr,
(void __user *) arg, AX25_ADDR_LEN)) {
@@ -864,6 +975,7 @@
}
static struct tty_ldisc ax_ldisc = {
+ .owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
.name = "mkiss",
.open = mkiss_open,
@@ -904,6 +1016,8 @@
MODULE_AUTHOR("Ralf Baechle DL5RB <ralf@linux-mips.org>");
MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs");
+MODULE_PARM(crc_force, "i");
+MODULE_PARM_DESC(crc_force, "crc [0 = auto | 1 = none | 2 = flexnet | 3 = smack]");
MODULE_LICENSE("GPL");
MODULE_ALIAS_LDISC(N_AX25);
diff --git a/drivers/net/hamradio/mkiss.h b/drivers/net/hamradio/mkiss.h
deleted file mode 100644
index 4ab7004..0000000
--- a/drivers/net/hamradio/mkiss.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/****************************************************************************
- * Defines for the Multi-KISS driver.
- ****************************************************************************/
-
-#define AX25_MAXDEV 16 /* MAX number of AX25 channels;
- This can be overridden with
- insmod -oax25_maxdev=nnn */
-#define AX_MTU 236
-
-/* SLIP/KISS protocol characters. */
-#define END 0300 /* indicates end of frame */
-#define ESC 0333 /* indicates byte stuffing */
-#define ESC_END 0334 /* ESC ESC_END means END 'data' */
-#define ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */
-
-struct ax_disp {
- int magic;
-
- /* Various fields. */
- struct tty_struct *tty; /* ptr to TTY structure */
- struct net_device *dev; /* easy for intr handling */
-
- /* These are pointers to the malloc()ed frame buffers. */
- unsigned char *rbuff; /* receiver buffer */
- int rcount; /* received chars counter */
- unsigned char *xbuff; /* transmitter buffer */
- unsigned char *xhead; /* pointer to next byte to XMIT */
- int xleft; /* bytes left in XMIT queue */
-
- /* SLIP interface statistics. */
- unsigned long rx_packets; /* inbound frames counter */
- unsigned long tx_packets; /* outbound frames counter */
- unsigned long rx_bytes; /* inbound bytes counter */
- unsigned long tx_bytes; /* outbound bytes counter */
- unsigned long rx_errors; /* Parity, etc. errors */
- unsigned long tx_errors; /* Planned stuff */
- unsigned long rx_dropped; /* No memory for skb */
- unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */
-
- /* Detailed SLIP statistics. */
- int mtu; /* Our mtu (to spot changes!) */
- int buffsize; /* Max buffers sizes */
-
-
- unsigned long flags; /* Flag values/ mode etc */
- /* long req'd: used by set_bit --RR */
-#define AXF_INUSE 0 /* Channel in use */
-#define AXF_ESCAPE 1 /* ESC received */
-#define AXF_ERROR 2 /* Parity, etc. error */
-#define AXF_KEEPTEST 3 /* Keepalive test flag */
-#define AXF_OUTWAIT 4 /* is outpacket was flag */
-
- int mode;
- int crcmode; /* MW: for FlexNet, SMACK etc. */
-#define CRC_MODE_NONE 0
-#define CRC_MODE_FLEX 1
-#define CRC_MODE_SMACK 2
- spinlock_t buflock; /* lock for rbuf and xbuf */
-};
-
-#define AX25_MAGIC 0x5316
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index cf0ac6f..b71fab6 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2517,10 +2517,8 @@
do {
if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
if (time_after_eq(jiffies, time)) /* no signal->no logout */
@@ -2536,10 +2534,8 @@
do {
if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
#ifdef HP100_DEBUG
@@ -2577,10 +2573,8 @@
do {
if (!(hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST))
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
hp100_orb(HP100_AUTO_MODE, MAC_CFG_3); /* Autosel back on */
@@ -2591,10 +2585,8 @@
do {
if ((hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) == 0)
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
if (time_before_eq(time, jiffies)) {
@@ -2606,10 +2598,8 @@
time = jiffies + (2 * HZ); /* This seems to take a while.... */
do {
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
return 0;
@@ -2659,10 +2649,8 @@
do {
if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
/* Start an addressed training and optionally request promiscuous port */
@@ -2697,10 +2685,8 @@
do {
if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_before(jiffies, time));
if (time_after_eq(jiffies, time)) {
@@ -2723,10 +2709,8 @@
#endif
break;
}
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
}
diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile
index 7f583a3..f98ddf0 100644
--- a/drivers/net/ibm_emac/Makefile
+++ b/drivers/net/ibm_emac/Makefile
@@ -1,12 +1,11 @@
#
-# Makefile for the IBM PPC4xx EMAC controllers
+# Makefile for the PowerPC 4xx on-chip ethernet driver
#
obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
-ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
-
-# Only need this if you want to see additional debug messages
-ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y)
-ibm_emac-objs += ibm_emac_debug.o
-endif
+ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
+ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o
+ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 15d5a0e..28c476f 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -1,110 +1,142 @@
/*
- * ibm_emac.h
+ * drivers/net/ibm_emac/ibm_emac.h
*
+ * Register definitions for PowerPC 4xx on-chip ethernet contoller
*
- * Armin Kuster akuster@mvista.com
- * June, 2002
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2002 MontaVista Softare Inc.
+ * Based on original work by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002-2004 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
+#ifndef __IBM_EMAC_H_
+#define __IBM_EMAC_H_
-#ifndef _IBM_EMAC_H_
-#define _IBM_EMAC_H_
-/* General defines needed for the driver */
+#include <linux/config.h>
+#include <linux/types.h>
-/* Emac */
-typedef struct emac_regs {
- u32 em0mr0;
- u32 em0mr1;
- u32 em0tmr0;
- u32 em0tmr1;
- u32 em0rmr;
- u32 em0isr;
- u32 em0iser;
- u32 em0iahr;
- u32 em0ialr;
- u32 em0vtpid;
- u32 em0vtci;
- u32 em0ptr;
- u32 em0iaht1;
- u32 em0iaht2;
- u32 em0iaht3;
- u32 em0iaht4;
- u32 em0gaht1;
- u32 em0gaht2;
- u32 em0gaht3;
- u32 em0gaht4;
- u32 em0lsah;
- u32 em0lsal;
- u32 em0ipgvr;
- u32 em0stacr;
- u32 em0trtr;
- u32 em0rwmr;
-} emac_t;
+/* This is a simple check to prevent use of this driver on non-tested SoCs */
+#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
+ !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
+ !defined(CONFIG_440EP) && !defined(CONFIG_NP405H)
+#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
+#endif
-/* MODE REG 0 */
-#define EMAC_M0_RXI 0x80000000
-#define EMAC_M0_TXI 0x40000000
-#define EMAC_M0_SRST 0x20000000
-#define EMAC_M0_TXE 0x10000000
-#define EMAC_M0_RXE 0x08000000
-#define EMAC_M0_WKE 0x04000000
+/* EMAC registers Write Access rules */
+struct emac_regs {
+ u32 mr0; /* special */
+ u32 mr1; /* Reset */
+ u32 tmr0; /* special */
+ u32 tmr1; /* special */
+ u32 rmr; /* Reset */
+ u32 isr; /* Always */
+ u32 iser; /* Reset */
+ u32 iahr; /* Reset, R, T */
+ u32 ialr; /* Reset, R, T */
+ u32 vtpid; /* Reset, R, T */
+ u32 vtci; /* Reset, R, T */
+ u32 ptr; /* Reset, T */
+ u32 iaht1; /* Reset, R */
+ u32 iaht2; /* Reset, R */
+ u32 iaht3; /* Reset, R */
+ u32 iaht4; /* Reset, R */
+ u32 gaht1; /* Reset, R */
+ u32 gaht2; /* Reset, R */
+ u32 gaht3; /* Reset, R */
+ u32 gaht4; /* Reset, R */
+ u32 lsah;
+ u32 lsal;
+ u32 ipgvr; /* Reset, T */
+ u32 stacr; /* special */
+ u32 trtr; /* special */
+ u32 rwmr; /* Reset */
+ u32 octx;
+ u32 ocrx;
+ u32 ipcr;
+};
-/* MODE Reg 1 */
-#define EMAC_M1_FDE 0x80000000
-#define EMAC_M1_ILE 0x40000000
-#define EMAC_M1_VLE 0x20000000
-#define EMAC_M1_EIFC 0x10000000
-#define EMAC_M1_APP 0x08000000
-#define EMAC_M1_AEMI 0x02000000
-#define EMAC_M1_IST 0x01000000
-#define EMAC_M1_MF_1000GPCS 0x00c00000 /* Internal GPCS */
-#define EMAC_M1_MF_1000MBPS 0x00800000 /* External GPCS */
-#define EMAC_M1_MF_100MBPS 0x00400000
-#define EMAC_M1_RFS_16K 0x00280000 /* 000 for 512 byte */
-#define EMAC_M1_TR 0x00008000
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_M1_RFS_8K 0x00200000
-#define EMAC_M1_RFS_4K 0x00180000
-#define EMAC_M1_RFS_2K 0x00100000
-#define EMAC_M1_RFS_1K 0x00080000
-#define EMAC_M1_TX_FIFO_16K 0x00050000 /* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_8K 0x00040000
-#define EMAC_M1_TX_FIFO_4K 0x00030000
-#define EMAC_M1_TX_FIFO_2K 0x00020000
-#define EMAC_M1_TX_FIFO_1K 0x00010000
-#define EMAC_M1_TX_TR 0x00008000
-#define EMAC_M1_TX_MWSW 0x00001000 /* 0 wait for status */
-#define EMAC_M1_JUMBO_ENABLE 0x00000800 /* Upt to 9Kr status */
-#define EMAC_M1_OPB_CLK_66 0x00000008 /* 66Mhz */
-#define EMAC_M1_OPB_CLK_83 0x00000010 /* 83Mhz */
-#define EMAC_M1_OPB_CLK_100 0x00000018 /* 100Mhz */
-#define EMAC_M1_OPB_CLK_100P 0x00000020 /* 100Mhz+ */
-#else /* CONFIG_IBM_EMAC4 */
-#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */
-#define EMAC_M1_RFS_2K 0x00200000
-#define EMAC_M1_RFS_1K 0x00100000
-#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_1K 0x00040000
-#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */
-#define EMAC_M1_TR1_DEPEND 0x00004000
-#define EMAC_M1_TR1_MULTI 0x00002000
-#define EMAC_M1_JUMBO_ENABLE 0x00001000
-#endif /* CONFIG_IBM_EMAC4 */
-#define EMAC_M1_BASE (EMAC_M1_TX_FIFO_2K | \
- EMAC_M1_APP | \
- EMAC_M1_TR | EMAC_M1_VLE)
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_ETHTOOL_REGS_VER 0
+#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32))
+#else
+#define EMAC_ETHTOOL_REGS_VER 1
+#define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs)
+#endif
-/* Transmit Mode Register 0 */
-#define EMAC_TMR0_GNP0 0x80000000
-#define EMAC_TMR0_GNP1 0x40000000
-#define EMAC_TMR0_GNPD 0x20000000
-#define EMAC_TMR0_FC 0x10000000
+/* EMACx_MR0 */
+#define EMAC_MR0_RXI 0x80000000
+#define EMAC_MR0_TXI 0x40000000
+#define EMAC_MR0_SRST 0x20000000
+#define EMAC_MR0_TXE 0x10000000
+#define EMAC_MR0_RXE 0x08000000
+#define EMAC_MR0_WKE 0x04000000
+
+/* EMACx_MR1 */
+#define EMAC_MR1_FDE 0x80000000
+#define EMAC_MR1_ILE 0x40000000
+#define EMAC_MR1_VLE 0x20000000
+#define EMAC_MR1_EIFC 0x10000000
+#define EMAC_MR1_APP 0x08000000
+#define EMAC_MR1_IST 0x01000000
+
+#define EMAC_MR1_MF_MASK 0x00c00000
+#define EMAC_MR1_MF_10 0x00000000
+#define EMAC_MR1_MF_100 0x00400000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_MR1_MF_1000 0x00000000
+#define EMAC_MR1_MF_1000GPCS 0x00000000
+#define EMAC_MR1_MF_IPPA(id) 0x00000000
+#else
+#define EMAC_MR1_MF_1000 0x00800000
+#define EMAC_MR1_MF_1000GPCS 0x00c00000
+#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6)
+#endif
+
+#define EMAC_TX_FIFO_SIZE 2048
+
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_MR1_RFS_4K 0x00300000
+#define EMAC_MR1_RFS_16K 0x00000000
+#define EMAC_RX_FIFO_SIZE(gige) 4096
+#define EMAC_MR1_TFS_2K 0x00080000
+#define EMAC_MR1_TR0_MULT 0x00008000
+#define EMAC_MR1_JPSM 0x00000000
+#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT)
+#else
+#define EMAC_MR1_RFS_4K 0x00180000
+#define EMAC_MR1_RFS_16K 0x00280000
+#define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096)
+#define EMAC_MR1_TFS_2K 0x00020000
+#define EMAC_MR1_TR 0x00008000
+#define EMAC_MR1_MWSW_001 0x00001000
+#define EMAC_MR1_JPSM 0x00000800
+#define EMAC_MR1_OBCI_MASK 0x00000038
+#define EMAC_MR1_OBCI_50 0x00000000
+#define EMAC_MR1_OBCI_66 0x00000008
+#define EMAC_MR1_OBCI_83 0x00000010
+#define EMAC_MR1_OBCI_100 0x00000018
+#define EMAC_MR1_OBCI_100P 0x00000020
+#define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \
+ (freq) <= 66 ? EMAC_MR1_OBCI_66 : \
+ (freq) <= 83 ? EMAC_MR1_OBCI_83 : \
+ (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P)
+#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \
+ EMAC_MR1_MWSW_001 | EMAC_MR1_OBCI(opb))
+#endif
+
+/* EMACx_TMR0 */
+#define EMAC_TMR0_GNP 0x80000000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TMR0_DEFAULT 0x00000000
+#else
#define EMAC_TMR0_TFAE_2_32 0x00000001
#define EMAC_TMR0_TFAE_4_64 0x00000002
#define EMAC_TMR0_TFAE_8_128 0x00000003
@@ -112,14 +144,36 @@
#define EMAC_TMR0_TFAE_32_512 0x00000005
#define EMAC_TMR0_TFAE_64_1024 0x00000006
#define EMAC_TMR0_TFAE_128_2048 0x00000007
+#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32
+#endif
+#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT)
-/* Receive Mode Register */
+/* EMACx_TMR1 */
+
+/* IBM manuals are not very clear here.
+ * This is my interpretation of how things are. --ebs
+ */
+#if defined(CONFIG_40x)
+#define EMAC_FIFO_ENTRY_SIZE 8
+#define EMAC_MAL_BURST_SIZE (16 * 4)
+#else
+#define EMAC_FIFO_ENTRY_SIZE 16
+#define EMAC_MAL_BURST_SIZE (64 * 4)
+#endif
+
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16))
+#else
+#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14))
+#endif
+
+/* EMACx_RMR */
#define EMAC_RMR_SP 0x80000000
#define EMAC_RMR_SFCS 0x40000000
-#define EMAC_RMR_ARRP 0x20000000
-#define EMAC_RMR_ARP 0x10000000
-#define EMAC_RMR_AROP 0x08000000
-#define EMAC_RMR_ARPI 0x04000000
+#define EMAC_RMR_RRP 0x20000000
+#define EMAC_RMR_RFP 0x10000000
+#define EMAC_RMR_ROP 0x08000000
+#define EMAC_RMR_RPIR 0x04000000
#define EMAC_RMR_PPP 0x02000000
#define EMAC_RMR_PME 0x01000000
#define EMAC_RMR_PMME 0x00800000
@@ -127,6 +181,9 @@
#define EMAC_RMR_MIAE 0x00200000
#define EMAC_RMR_BAE 0x00100000
#define EMAC_RMR_MAE 0x00080000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_RMR_BASE 0x00000000
+#else
#define EMAC_RMR_RFAF_2_32 0x00000001
#define EMAC_RMR_RFAF_4_64 0x00000002
#define EMAC_RMR_RFAF_8_128 0x00000003
@@ -134,9 +191,21 @@
#define EMAC_RMR_RFAF_32_512 0x00000005
#define EMAC_RMR_RFAF_64_1024 0x00000006
#define EMAC_RMR_RFAF_128_2048 0x00000007
-#define EMAC_RMR_BASE (EMAC_RMR_IAE | EMAC_RMR_BAE)
+#define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048
+#endif
-/* Interrupt Status & enable Regs */
+/* EMACx_ISR & EMACx_ISER */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_ISR_TXPE 0x00000000
+#define EMAC_ISR_RXPE 0x00000000
+#define EMAC_ISR_TXUE 0x00000000
+#define EMAC_ISR_RXOE 0x00000000
+#else
+#define EMAC_ISR_TXPE 0x20000000
+#define EMAC_ISR_RXPE 0x10000000
+#define EMAC_ISR_TXUE 0x08000000
+#define EMAC_ISR_RXOE 0x04000000
+#endif
#define EMAC_ISR_OVR 0x02000000
#define EMAC_ISR_PP 0x01000000
#define EMAC_ISR_BP 0x00800000
@@ -147,53 +216,62 @@
#define EMAC_ISR_PTLE 0x00040000
#define EMAC_ISR_ORE 0x00020000
#define EMAC_ISR_IRE 0x00010000
-#define EMAC_ISR_DBDM 0x00000200
-#define EMAC_ISR_DB0 0x00000100
-#define EMAC_ISR_SE0 0x00000080
-#define EMAC_ISR_TE0 0x00000040
-#define EMAC_ISR_DB1 0x00000020
-#define EMAC_ISR_SE1 0x00000010
-#define EMAC_ISR_TE1 0x00000008
+#define EMAC_ISR_SQE 0x00000080
+#define EMAC_ISR_TE 0x00000040
#define EMAC_ISR_MOS 0x00000002
#define EMAC_ISR_MOF 0x00000001
-/* STA CONTROL REG */
+/* EMACx_STACR */
+#define EMAC_STACR_PHYD_MASK 0xffff
+#define EMAC_STACR_PHYD_SHIFT 16
#define EMAC_STACR_OC 0x00008000
#define EMAC_STACR_PHYE 0x00004000
-#define EMAC_STACR_WRITE 0x00002000
-#define EMAC_STACR_READ 0x00001000
-#define EMAC_STACR_CLK_83MHZ 0x00000800 /* 0's for 50Mhz */
-#define EMAC_STACR_CLK_66MHZ 0x00000400
-#define EMAC_STACR_CLK_100MHZ 0x00000C00
+#define EMAC_STACR_STAC_MASK 0x00003000
+#define EMAC_STACR_STAC_READ 0x00001000
+#define EMAC_STACR_STAC_WRITE 0x00002000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_STACR_OPBC_MASK 0x00000C00
+#define EMAC_STACR_OPBC_50 0x00000000
+#define EMAC_STACR_OPBC_66 0x00000400
+#define EMAC_STACR_OPBC_83 0x00000800
+#define EMAC_STACR_OPBC_100 0x00000C00
+#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \
+ (freq) <= 66 ? EMAC_STACR_OPBC_66 : \
+ (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100)
+#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb)
+#else
+#define EMAC_STACR_BASE(opb) 0x00000000
+#endif
+#define EMAC_STACR_PCDA_MASK 0x1f
+#define EMAC_STACR_PCDA_SHIFT 5
+#define EMAC_STACR_PRA_MASK 0x1f
-/* Transmit Request Threshold Register */
-#define EMAC_TRTR_1600 0x18000000 /* 0's for 64 Bytes */
-#define EMAC_TRTR_1024 0x0f000000
-#define EMAC_TRTR_512 0x07000000
-#define EMAC_TRTR_256 0x03000000
-#define EMAC_TRTR_192 0x10000000
-#define EMAC_TRTR_128 0x01000000
+/* EMACx_TRTR */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TRTR_SHIFT 27
+#else
+#define EMAC_TRTR_SHIFT 24
+#endif
+#define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT)
+/* EMACx_RWMR */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7))
+#else
+#define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6))
+#endif
+
+/* EMAC specific TX descriptor control fields (write access) */
#define EMAC_TX_CTRL_GFCS 0x0200
#define EMAC_TX_CTRL_GP 0x0100
#define EMAC_TX_CTRL_ISA 0x0080
#define EMAC_TX_CTRL_RSA 0x0040
#define EMAC_TX_CTRL_IVT 0x0020
#define EMAC_TX_CTRL_RVT 0x0010
-#define EMAC_TX_CTRL_TAH_CSUM 0x000e /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG4 0x000a /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG3 0x0008 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG2 0x0006 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG1 0x0004 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG0 0x0002 /* TAH only */
-#define EMAC_TX_CTRL_TAH_DIS 0x0000 /* TAH only */
+#define EMAC_TX_CTRL_TAH_CSUM 0x000e
-#define EMAC_TX_CTRL_DFLT ( \
- MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP )
-
-/* madmal transmit status / Control bits */
+/* EMAC specific TX descriptor status fields (read access) */
#define EMAC_TX_ST_BFCS 0x0200
-#define EMAC_TX_ST_BPP 0x0100
#define EMAC_TX_ST_LCS 0x0080
#define EMAC_TX_ST_ED 0x0040
#define EMAC_TX_ST_EC 0x0020
@@ -202,8 +280,16 @@
#define EMAC_TX_ST_SC 0x0004
#define EMAC_TX_ST_UR 0x0002
#define EMAC_TX_ST_SQE 0x0001
+#if !defined(CONFIG_IBM_EMAC_TAH)
+#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
+ EMAC_TX_ST_EC | EMAC_TX_ST_LC | \
+ EMAC_TX_ST_MC | EMAC_TX_ST_UR))
+#else
+#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
+ EMAC_TX_ST_EC | EMAC_TX_ST_LC))
+#endif
-/* madmal receive status / Control bits */
+/* EMAC specific RX descriptor status fields (read access) */
#define EMAC_RX_ST_OE 0x0200
#define EMAC_RX_ST_PP 0x0100
#define EMAC_RX_ST_BP 0x0080
@@ -214,54 +300,10 @@
#define EMAC_RX_ST_PTL 0x0004
#define EMAC_RX_ST_ORE 0x0002
#define EMAC_RX_ST_IRE 0x0001
-#define EMAC_BAD_RX_PACKET 0x02ff
-#define EMAC_CSUM_VER_ERROR 0x0003
-
-/* identify a bad rx packet dependent on emac features */
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_IS_BAD_RX_PACKET(desc) \
- (((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \
- ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \
- ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE)))
-#else
-#define EMAC_IS_BAD_RX_PACKET(desc) \
- (desc & EMAC_BAD_RX_PACKET)
-#endif
-
-/* SoC implementation specific EMAC register defaults */
-#if defined(CONFIG_440GP)
-#define EMAC_RWMR_DEFAULT 0x80009000
-#define EMAC_TMR0_DEFAULT 0x00000000
-#define EMAC_TMR1_DEFAULT 0xf8640000
-#elif defined(CONFIG_440GX)
-#define EMAC_RWMR_DEFAULT 0x1000a200
-#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32
-#define EMAC_TMR1_DEFAULT 0xa00f0000
-#elif defined(CONFIG_440SP)
-#define EMAC_RWMR_DEFAULT 0x08002000
-#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_128_2048
-#define EMAC_TMR1_DEFAULT 0xf8200000
-#else
-#define EMAC_RWMR_DEFAULT 0x0f002000
-#define EMAC_TMR0_DEFAULT 0x00000000
-#define EMAC_TMR1_DEFAULT 0x380f0000
-#endif /* CONFIG_440GP */
-
-/* Revision specific EMAC register defaults */
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_M1_DEFAULT (EMAC_M1_BASE | \
- EMAC_M1_OPB_CLK_83 | \
- EMAC_M1_TX_MWSW)
-#define EMAC_RMR_DEFAULT (EMAC_RMR_BASE | \
- EMAC_RMR_RFAF_128_2048)
-#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP0 | \
- EMAC_TMR0_DEFAULT)
-#define EMAC_TRTR_DEFAULT EMAC_TRTR_1024
-#else /* !CONFIG_IBM_EMAC4 */
-#define EMAC_M1_DEFAULT EMAC_M1_BASE
-#define EMAC_RMR_DEFAULT EMAC_RMR_BASE
-#define EMAC_TMR0_XMIT EMAC_TMR0_GNP0
-#define EMAC_TRTR_DEFAULT EMAC_TRTR_1600
-#endif /* CONFIG_IBM_EMAC4 */
-
-#endif
+#define EMAC_RX_TAH_BAD_CSUM 0x0003
+#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \
+ EMAC_RX_ST_RP | EMAC_RX_ST_SE | \
+ EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \
+ EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \
+ EMAC_RX_ST_IRE )
+#endif /* __IBM_EMAC_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 14e9b631..943fbd1 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1,13 +1,14 @@
/*
- * ibm_emac_core.c
+ * drivers/net/ibm_emac/ibm_emac_core.c
*
- * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC
- * processors.
- *
- * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Driver for PowerPC 4xx on-chip ethernet controller.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
- *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Armin Kuster <akuster@mvista.com>
* Johnnie Peters <jpeters@mvista.com>
*
@@ -15,29 +16,24 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- * TODO
- * - Check for races in the "remove" code path
- * - Add some Power Management to the MAC and the PHY
- * - Audit remaining of non-rewritten code (--BenH)
- * - Cleanup message display using msglevel mecanism
- * - Address all errata
- * - Audit all register update paths to ensure they
- * are being written post soft reset if required.
+ *
*/
+
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ptrace.h>
#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/crc32.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/bitops.h>
@@ -45,1691 +41,1893 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/ocp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/crc32.h>
-
#include "ibm_emac_core.h"
-
-//#define MDIO_DEBUG(fmt) printk fmt
-#define MDIO_DEBUG(fmt)
-
-//#define LINK_DEBUG(fmt) printk fmt
-#define LINK_DEBUG(fmt)
-
-//#define PKT_DEBUG(fmt) printk fmt
-#define PKT_DEBUG(fmt)
-
-#define DRV_NAME "emac"
-#define DRV_VERSION "2.0"
-#define DRV_AUTHOR "Benjamin Herrenschmidt <benh@kernel.crashing.org>"
-#define DRV_DESC "IBM EMAC Ethernet driver"
+#include "ibm_emac_debug.h"
/*
- * When mdio_idx >= 0, contains a list of emac ocp_devs
- * that have had their initialization deferred until the
- * common MDIO controller has been initialized.
+ * Lack of dma_unmap_???? calls is intentional.
+ *
+ * API-correct usage requires additional support state information to be
+ * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
+ * EMAC design (e.g. TX buffer passed from network stack can be split into
+ * several BDs, dma_map_single/dma_map_page can be used to map particular BD),
+ * maintaining such information will add additional overhead.
+ * Current DMA API implementation for 4xx processors only ensures cache coherency
+ * and dma_unmap_???? routines are empty and are likely to stay this way.
+ * I decided to omit dma_unmap_??? calls because I don't want to add additional
+ * complexity just for the sake of following some abstract API, when it doesn't
+ * add any real benefit to the driver. I understand that this decision maybe
+ * controversial, but I really tried to make code API-correct and efficient
+ * at the same time and didn't come up with code I liked :(. --ebs
*/
-LIST_HEAD(emac_init_list);
-MODULE_AUTHOR(DRV_AUTHOR);
+#define DRV_NAME "emac"
+#define DRV_VERSION "3.53"
+#define DRV_DESC "PPC 4xx OCP EMAC driver"
+
MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR
+ ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
MODULE_LICENSE("GPL");
-static int skb_res = SKB_RES;
-module_param(skb_res, int, 0444);
-MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n"
- "The 405 handles a misaligned IP header fine but\n"
- "this can help if you are routing to a tunnel or a\n"
- "device that needs aligned data. 0..2");
+/* minimum number of free TX descriptors required to wake up TX process */
+#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4)
-#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev))
-
-static unsigned int rgmii_enable[] = {
- RGMII_RTBI,
- RGMII_RGMII,
- RGMII_TBI,
- RGMII_GMII
-};
-
-static unsigned int rgmii_speed_mask[] = {
- RGMII_MII2_SPDMASK,
- RGMII_MII3_SPDMASK
-};
-
-static unsigned int rgmii_speed100[] = {
- RGMII_MII2_100MB,
- RGMII_MII3_100MB
-};
-
-static unsigned int rgmii_speed1000[] = {
- RGMII_MII2_1000MB,
- RGMII_MII3_1000MB
-};
-
-#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev))
-
-static unsigned int zmii_enable[][4] = {
- {ZMII_SMII0, ZMII_RMII0, ZMII_MII0,
- ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)},
- {ZMII_SMII1, ZMII_RMII1, ZMII_MII1,
- ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)},
- {ZMII_SMII2, ZMII_RMII2, ZMII_MII2,
- ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)},
- {ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)}
-};
-
-static unsigned int mdi_enable[] = {
- ZMII_MDI0,
- ZMII_MDI1,
- ZMII_MDI2,
- ZMII_MDI3
-};
-
-static unsigned int zmii_speed = 0x0;
-static unsigned int zmii_speed100[] = {
- ZMII_MII0_100MB,
- ZMII_MII1_100MB,
- ZMII_MII2_100MB,
- ZMII_MII3_100MB
-};
+/* If packet size is less than this number, we allocate small skb and copy packet
+ * contents into it instead of just sending original big skb up
+ */
+#define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
/* Since multiple EMACs share MDIO lines in various ways, we need
* to avoid re-using the same PHY ID in cases where the arch didn't
* setup precise phy_map entries
*/
-static u32 busy_phy_map = 0;
+static u32 busy_phy_map;
-/* If EMACs share a common MDIO device, this points to it */
-static struct net_device *mdio_ndev = NULL;
-
-struct emac_def_dev {
- struct list_head link;
- struct ocp_device *ocpdev;
- struct ibm_ocp_mal *mal;
-};
-
-static struct net_device_stats *emac_stats(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- return &fep->stats;
-};
-
-static int
-emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev);
- const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" };
- int mode = -1;
-
- if (!rgmii) {
- rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
-
- if (rgmii == NULL) {
- printk(KERN_ERR
- "rgmii%d: Out of memory allocating RGMII structure!\n",
- rgmii_dev->def->index);
- return -ENOMEM;
- }
-
- memset(rgmii, 0, sizeof(*rgmii));
-
- rgmii->base =
- (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr,
- sizeof(*rgmii->base));
- if (rgmii->base == NULL) {
- printk(KERN_ERR
- "rgmii%d: Cannot ioremap bridge registers!\n",
- rgmii_dev->def->index);
-
- kfree(rgmii);
- return -ENOMEM;
- }
- ocp_set_drvdata(rgmii_dev, rgmii);
- }
-
- if (phy_mode) {
- switch (phy_mode) {
- case PHY_MODE_GMII:
- mode = GMII;
- break;
- case PHY_MODE_TBI:
- mode = TBI;
- break;
- case PHY_MODE_RTBI:
- mode = RTBI;
- break;
- case PHY_MODE_RGMII:
- default:
- mode = RGMII;
- }
- rgmii->base->fer &= ~RGMII_FER_MASK(input);
- rgmii->base->fer |= rgmii_enable[mode] << (4 * input);
- } else {
- switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 *
- input)) {
- case RGMII_RTBI:
- mode = RTBI;
- break;
- case RGMII_RGMII:
- mode = RGMII;
- break;
- case RGMII_TBI:
- mode = TBI;
- break;
- case RGMII_GMII:
- mode = GMII;
- }
- }
-
- /* Set mode to RGMII if nothing valid is detected */
- if (mode < 0)
- mode = RGMII;
-
- printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
- rgmii_dev->def->index, input, mode_name[mode]);
-
- rgmii->mode[input] = mode;
- rgmii->users++;
-
- return 0;
-}
-
-static void
-emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
- unsigned int rgmii_speed;
-
- rgmii_speed = in_be32(&rgmii->base->ssr);
-
- rgmii_speed &= ~rgmii_speed_mask[input];
-
- if (speed == 1000)
- rgmii_speed |= rgmii_speed1000[input];
- else if (speed == 100)
- rgmii_speed |= rgmii_speed100[input];
-
- out_be32(&rgmii->base->ssr, rgmii_speed);
-}
-
-static void emac_close_rgmii(struct ocp_device *ocpdev)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
- BUG_ON(!rgmii || rgmii->users == 0);
-
- if (!--rgmii->users) {
- ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)rgmii->base);
- kfree(rgmii);
- }
-}
-
-static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev);
- const char *mode_name[] = { "SMII", "RMII", "MII" };
- int mode = -1;
-
- if (!zmii) {
- zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
- if (zmii == NULL) {
- printk(KERN_ERR
- "zmii%d: Out of memory allocating ZMII structure!\n",
- zmii_dev->def->index);
- return -ENOMEM;
- }
- memset(zmii, 0, sizeof(*zmii));
-
- zmii->base =
- (struct zmii_regs *)ioremap(zmii_dev->def->paddr,
- sizeof(*zmii->base));
- if (zmii->base == NULL) {
- printk(KERN_ERR
- "zmii%d: Cannot ioremap bridge registers!\n",
- zmii_dev->def->index);
-
- kfree(zmii);
- return -ENOMEM;
- }
- ocp_set_drvdata(zmii_dev, zmii);
- }
-
- if (phy_mode) {
- switch (phy_mode) {
- case PHY_MODE_MII:
- mode = MII;
- break;
- case PHY_MODE_RMII:
- mode = RMII;
- break;
- case PHY_MODE_SMII:
- default:
- mode = SMII;
- }
- zmii->base->fer &= ~ZMII_FER_MASK(input);
- zmii->base->fer |= zmii_enable[input][mode];
- } else {
- switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) {
- case ZMII_MII0:
- mode = MII;
- break;
- case ZMII_RMII0:
- mode = RMII;
- break;
- case ZMII_SMII0:
- mode = SMII;
- }
- }
-
- /* Set mode to SMII if nothing valid is detected */
- if (mode < 0)
- mode = SMII;
-
- printk(KERN_NOTICE "zmii%d: input %d in %s mode\n",
- zmii_dev->def->index, input, mode_name[mode]);
-
- zmii->mode[input] = mode;
- zmii->users++;
-
- return 0;
-}
-
-static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input)
-{
- u32 mask;
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
-
- mask = in_be32(&zmii->base->fer);
- mask &= zmii_enable[input][MDI]; /* turn all non enabled MDI's off */
- mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input];
- out_be32(&zmii->base->fer, mask);
-}
-
-static void
-emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
-
- if (speed == 100)
- zmii_speed |= zmii_speed100[input];
- else
- zmii_speed &= ~zmii_speed100[input];
-
- out_be32(&zmii->base->ssr, zmii_speed);
-}
-
-static void emac_close_zmii(struct ocp_device *ocpdev)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
- BUG_ON(!zmii || zmii->users == 0);
-
- if (!--zmii->users) {
- ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)zmii->base);
- kfree(zmii);
- }
-}
-
-int emac_phy_read(struct net_device *dev, int mii_id, int reg)
-{
- int count;
- uint32_t stacr;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id,
- reg));
-
- /* Enable proper ZMII port */
- if (fep->zmii_dev)
- emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
-
- /* Use the EMAC that has the MDIO port */
- if (fep->mdio_dev) {
- dev = fep->mdio_dev;
- fep = dev->priv;
- emacp = fep->emacp;
- }
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
- return -1;
- }
-
- /* Clear the speed bits and make a read request to the PHY */
- stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
- stacr |= ((mii_id & 0x1F) << 5);
-
- out_be32(&emacp->em0stacr, stacr);
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
- return -1;
- }
-
- /* Check for a read error */
- if (stacr & EMAC_STACR_PHYE) {
- MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
- return -1;
- }
-
- MDIO_DEBUG((" -> 0x%x\n", stacr >> 16));
-
- return (stacr >> 16);
-}
-
-void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data)
-{
- int count;
- uint32_t stacr;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n",
- dev->name, mii_id, reg, data));
-
- /* Enable proper ZMII port */
- if (fep->zmii_dev)
- emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
-
- /* Use the EMAC that has the MDIO port */
- if (fep->mdio_dev) {
- dev = fep->mdio_dev;
- fep = dev->priv;
- emacp = fep->emacp;
- }
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
- return;
- }
-
- /* Clear the speed bits and make a read request to the PHY */
-
- stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
- stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
-
- out_be32(&emacp->em0stacr, stacr);
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0)
- printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
-
- /* Check for a write error */
- if ((stacr & EMAC_STACR_PHYE) != 0) {
- MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
- }
-}
-
-static void emac_txeob_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
- unsigned long flags;
-
- spin_lock_irqsave(&fep->lock, flags);
-
- PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt));
-
- while (fep->tx_cnt &&
- !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) {
-
- if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) {
- /* Tell the system the transmit completed. */
- dma_unmap_single(&fep->ocpdev->dev,
- fep->tx_desc[fep->ack_slot].data_ptr,
- fep->tx_desc[fep->ack_slot].data_len,
- DMA_TO_DEVICE);
- dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]);
-
- if (fep->tx_desc[fep->ack_slot].ctrl &
- (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC))
- fep->stats.collisions++;
- }
-
- fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL;
- if (++fep->ack_slot == NUM_TX_BUFF)
- fep->ack_slot = 0;
-
- fep->tx_cnt--;
- }
- if (fep->tx_cnt < NUM_TX_BUFF)
- netif_wake_queue(dev);
-
- PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt));
-
- spin_unlock_irqrestore(&fep->lock, flags);
-}
-
-/*
- Fill/Re-fill the rx chain with valid ctrl/ptrs.
- This function will fill from rx_slot up to the parm end.
- So to completely fill the chain pre-set rx_slot to 0 and
- pass in an end of 0.
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP))
+/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
+ * with PHY RX clock problem.
+ * 440EP has more sane SDR0_MFR register implementation than 440GX, which
+ * also allows controlling each EMAC clock
*/
-static void emac_rx_fill(struct net_device *dev, int end)
+static inline void EMAC_RX_CLK_TX(int idx)
{
- int i;
- struct ocp_enet_private *fep = dev->priv;
-
- i = fep->rx_slot;
- do {
- /* We don't want the 16 bytes skb_reserve done by dev_alloc_skb,
- * it breaks our cache line alignement. However, we still allocate
- * +16 so that we end up allocating the exact same size as
- * dev_alloc_skb() would do.
- * Also, because of the skb_res, the max DMA size we give to EMAC
- * is slighly wrong, causing it to potentially DMA 2 more bytes
- * from a broken/oversized packet. These 16 bytes will take care
- * that we don't walk on somebody else toes with that.
- */
- fep->rx_skb[i] =
- alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC);
-
- if (fep->rx_skb[i] == NULL) {
- /* Keep rx_slot here, the next time clean/fill is called
- * we will try again before the MAL wraps back here
- * If the MAL tries to use this descriptor with
- * the EMPTY bit off it will cause the
- * rxde interrupt. That is where we will
- * try again to allocate an sk_buff.
- */
- break;
-
- }
-
- if (skb_res)
- skb_reserve(fep->rx_skb[i], skb_res);
-
- /* We must NOT dma_map_single the cache line right after the
- * buffer, so we must crop our sync size to account for the
- * reserved space
- */
- fep->rx_desc[i].data_ptr =
- (unsigned char *)dma_map_single(&fep->ocpdev->dev,
- (void *)fep->rx_skb[i]->
- data,
- fep->rx_buffer_size -
- skb_res, DMA_FROM_DEVICE);
-
- /*
- * Some 4xx implementations use the previously
- * reserved bits in data_len to encode the MS
- * 4-bits of a 36-bit physical address (ERPN)
- * This must be initialized.
- */
- fep->rx_desc[i].data_len = 0;
- fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR |
- (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
-
- } while ((i = (i + 1) % NUM_RX_BUFF) != end);
-
- fep->rx_slot = i;
-}
-
-static void
-emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb)
-{
- struct ocp_enet_private *fep = dev->priv;
-
- /* Exit if interface has no TAH engine */
- if (!fep->tah_dev) {
- skb->ip_summed = CHECKSUM_NONE;
- return;
- }
-
- /* Check for TCP/UDP/IP csum error */
- if (ctrl & EMAC_CSUM_VER_ERROR) {
- /* Let the stack verify checksum errors */
- skb->ip_summed = CHECKSUM_NONE;
-/* adapter->hw_csum_err++; */
- } else {
- /* Csum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-/* adapter->hw_csum_good++; */
- }
-}
-
-static int emac_rx_clean(struct net_device *dev)
-{
- int i, b, bnum = 0, buf[6];
- int error, frame_length;
- struct ocp_enet_private *fep = dev->priv;
- unsigned short ctrl;
-
- i = fep->rx_slot;
-
- PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot));
-
- do {
- if (fep->rx_skb[i] == NULL)
- continue; /*we have already handled the packet but haved failed to alloc */
- /*
- since rx_desc is in uncached mem we don't keep reading it directly
- we pull out a local copy of ctrl and do the checks on the copy.
- */
- ctrl = fep->rx_desc[i].ctrl;
- if (ctrl & MAL_RX_CTRL_EMPTY)
- break; /*we don't have any more ready packets */
-
- if (EMAC_IS_BAD_RX_PACKET(ctrl)) {
- fep->stats.rx_errors++;
- fep->stats.rx_dropped++;
-
- if (ctrl & EMAC_RX_ST_OE)
- fep->stats.rx_fifo_errors++;
- if (ctrl & EMAC_RX_ST_AE)
- fep->stats.rx_frame_errors++;
- if (ctrl & EMAC_RX_ST_BFCS)
- fep->stats.rx_crc_errors++;
- if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL |
- EMAC_RX_ST_ORE | EMAC_RX_ST_IRE))
- fep->stats.rx_length_errors++;
- } else {
- if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) ==
- (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) {
- /* Single descriptor packet */
- emac_rx_csum(dev, ctrl, fep->rx_skb[i]);
- /* Send the skb up the chain. */
- frame_length = fep->rx_desc[i].data_len - 4;
- skb_put(fep->rx_skb[i], frame_length);
- fep->rx_skb[i]->dev = dev;
- fep->rx_skb[i]->protocol =
- eth_type_trans(fep->rx_skb[i], dev);
- error = netif_rx(fep->rx_skb[i]);
-
- if ((error == NET_RX_DROP) ||
- (error == NET_RX_BAD)) {
- fep->stats.rx_dropped++;
- } else {
- fep->stats.rx_packets++;
- fep->stats.rx_bytes += frame_length;
- }
- fep->rx_skb[i] = NULL;
- } else {
- /* Multiple descriptor packet */
- if (ctrl & MAL_RX_CTRL_FIRST) {
- if (fep->rx_desc[(i + 1) % NUM_RX_BUFF].
- ctrl & MAL_RX_CTRL_EMPTY)
- break;
- bnum = 0;
- buf[bnum] = i;
- ++bnum;
- continue;
- }
- if (((ctrl & MAL_RX_CTRL_FIRST) !=
- MAL_RX_CTRL_FIRST) &&
- ((ctrl & MAL_RX_CTRL_LAST) !=
- MAL_RX_CTRL_LAST)) {
- if (fep->rx_desc[(i + 1) %
- NUM_RX_BUFF].ctrl &
- MAL_RX_CTRL_EMPTY) {
- i = buf[0];
- break;
- }
- buf[bnum] = i;
- ++bnum;
- continue;
- }
- if (ctrl & MAL_RX_CTRL_LAST) {
- buf[bnum] = i;
- ++bnum;
- skb_put(fep->rx_skb[buf[0]],
- fep->rx_desc[buf[0]].data_len);
- for (b = 1; b < bnum; b++) {
- /*
- * MAL is braindead, we need
- * to copy the remainder
- * of the packet from the
- * latter descriptor buffers
- * to the first skb. Then
- * dispose of the source
- * skbs.
- *
- * Once the stack is fixed
- * to handle frags on most
- * protocols we can generate
- * a fragmented skb with
- * no copies.
- */
- memcpy(fep->rx_skb[buf[0]]->
- data +
- fep->rx_skb[buf[0]]->len,
- fep->rx_skb[buf[b]]->
- data,
- fep->rx_desc[buf[b]].
- data_len);
- skb_put(fep->rx_skb[buf[0]],
- fep->rx_desc[buf[b]].
- data_len);
- dma_unmap_single(&fep->ocpdev->
- dev,
- fep->
- rx_desc[buf
- [b]].
- data_ptr,
- fep->
- rx_desc[buf
- [b]].
- data_len,
- DMA_FROM_DEVICE);
- dev_kfree_skb(fep->
- rx_skb[buf[b]]);
- }
- emac_rx_csum(dev, ctrl,
- fep->rx_skb[buf[0]]);
-
- fep->rx_skb[buf[0]]->dev = dev;
- fep->rx_skb[buf[0]]->protocol =
- eth_type_trans(fep->rx_skb[buf[0]],
- dev);
- error = netif_rx(fep->rx_skb[buf[0]]);
-
- if ((error == NET_RX_DROP)
- || (error == NET_RX_BAD)) {
- fep->stats.rx_dropped++;
- } else {
- fep->stats.rx_packets++;
- fep->stats.rx_bytes +=
- fep->rx_skb[buf[0]]->len;
- }
- for (b = 0; b < bnum; b++)
- fep->rx_skb[buf[b]] = NULL;
- }
- }
- }
- } while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot);
-
- PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot));
-
- return i;
-}
-
-static void emac_rxeob_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
+ local_irq_save(flags);
+
+#if defined(CONFIG_405EP)
+ mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
+#else /* CONFIG_440EP */
+ SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
+#endif
+
+ local_irq_restore(flags);
+}
+
+static inline void EMAC_RX_CLK_DEFAULT(int idx)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+
+#if defined(CONFIG_405EP)
+ mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx));
+#else /* CONFIG_440EP */
+ SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx));
+#endif
+
+ local_irq_restore(flags);
+}
+#else
+#define EMAC_RX_CLK_TX(idx) ((void)0)
+#define EMAC_RX_CLK_DEFAULT(idx) ((void)0)
+#endif
+
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX)
+/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS],
+ * unfortunately this is less flexible than 440EP case, because it's a global
+ * setting for all EMACs, therefore we do this clock trick only during probe.
+ */
+#define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \
+ SDR_READ(DCRN_SDR_MFR) | 0x08000000)
+#define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \
+ SDR_READ(DCRN_SDR_MFR) & ~0x08000000)
+#else
+#define EMAC_CLK_INTERNAL ((void)0)
+#define EMAC_CLK_EXTERNAL ((void)0)
+#endif
+
+/* I don't want to litter system log with timeout errors
+ * when we have brain-damaged PHY.
+ */
+static inline void emac_report_timeout_error(struct ocp_enet_private *dev,
+ const char *error)
+{
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
+ DBG("%d: %s" NL, dev->def->index, error);
+#else
+ if (net_ratelimit())
+ printk(KERN_ERR "emac%d: %s\n", dev->def->index, error);
+#endif
+}
+
+/* PHY polling intervals */
+#define PHY_POLL_LINK_ON HZ
+#define PHY_POLL_LINK_OFF (HZ / 5)
+
+/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
+static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
+ "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
+ "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
+ "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
+ "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
+ "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
+ "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
+ "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
+ "rx_bad_packet", "rx_runt_packet", "rx_short_event",
+ "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
+ "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
+ "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
+ "tx_bd_excessive_collisions", "tx_bd_late_collision",
+ "tx_bd_multple_collisions", "tx_bd_single_collision",
+ "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
+ "tx_errors"
+};
+
+static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs);
+static void emac_clean_tx_ring(struct ocp_enet_private *dev);
+
+static inline int emac_phy_supports_gige(int phy_mode)
+{
+ return phy_mode == PHY_MODE_GMII ||
+ phy_mode == PHY_MODE_RGMII ||
+ phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline int emac_phy_gpcs(int phy_mode)
+{
+ return phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline void emac_tx_enable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: tx_enable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (!(r & EMAC_MR0_TXE))
+ out_be32(&p->mr0, r | EMAC_MR0_TXE);
+ local_irq_restore(flags);
+}
+
+static void emac_tx_disable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: tx_disable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_TXE) {
+ int n = 300;
+ out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
+ while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev, "TX disable timeout");
+ }
+ local_irq_restore(flags);
+}
+
+static void emac_rx_enable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+ if (unlikely(dev->commac.rx_stopped))
+ goto out;
+
+ DBG("%d: rx_enable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (!(r & EMAC_MR0_RXE)) {
+ if (unlikely(!(r & EMAC_MR0_RXI))) {
+ /* Wait if previous async disable is still in progress */
+ int n = 100;
+ while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev,
+ "RX disable timeout");
+ }
+ out_be32(&p->mr0, r | EMAC_MR0_RXE);
+ }
+ out:
+ local_irq_restore(flags);
+}
+
+static void emac_rx_disable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: rx_disable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_RXE) {
+ int n = 300;
+ out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
+ while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev, "RX disable timeout");
+ }
+ local_irq_restore(flags);
+}
+
+static inline void emac_rx_disable_async(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: rx_disable_async" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_RXE)
+ out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
+ local_irq_restore(flags);
+}
+
+static int emac_reset(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ int n = 20;
+
+ DBG("%d: reset" NL, dev->def->index);
+
+ local_irq_save(flags);
+
+ if (!dev->reset_failed) {
+ /* 40x erratum suggests stopping RX channel before reset,
+ * we stop TX as well
+ */
+ emac_rx_disable(dev);
+ emac_tx_disable(dev);
+ }
+
+ out_be32(&p->mr0, EMAC_MR0_SRST);
+ while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
+ --n;
+ local_irq_restore(flags);
+
+ if (n) {
+ dev->reset_failed = 0;
+ return 0;
+ } else {
+ emac_report_timeout_error(dev, "reset timeout");
+ dev->reset_failed = 1;
+ return -ETIMEDOUT;
+ }
+}
+
+static void emac_hash_mc(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ u16 gaht[4] = { 0 };
+ struct dev_mc_list *dmi;
+
+ DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count);
+
+ for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
+ int bit;
+ DBG2("%d: mc %02x:%02x:%02x:%02x:%02x:%02x" NL,
+ dev->def->index,
+ dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2],
+ dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]);
+
+ bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26);
+ gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f);
+ }
+ out_be32(&p->gaht1, gaht[0]);
+ out_be32(&p->gaht2, gaht[1]);
+ out_be32(&p->gaht3, gaht[2]);
+ out_be32(&p->gaht4, gaht[3]);
+}
+
+static inline u32 emac_iff2rmr(struct net_device *ndev)
+{
+ u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE |
+ EMAC_RMR_BASE;
+
+ if (ndev->flags & IFF_PROMISC)
+ r |= EMAC_RMR_PME;
+ else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32)
+ r |= EMAC_RMR_PMME;
+ else if (ndev->mc_count > 0)
+ r |= EMAC_RMR_MAE;
+
+ return r;
+}
+
+static inline int emac_opb_mhz(void)
+{
+ return (ocp_sys_info.opb_bus_freq + 500000) / 1000000;
+}
+
+/* BHs disabled */
+static int emac_configure(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ struct net_device *ndev = dev->ndev;
+ int gige;
+ u32 r;
+
+ DBG("%d: configure" NL, dev->def->index);
+
+ if (emac_reset(dev) < 0)
+ return -ETIMEDOUT;
+
+ tah_reset(dev->tah_dev);
+
+ /* Mode register */
+ r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST;
+ if (dev->phy.duplex == DUPLEX_FULL)
+ r |= EMAC_MR1_FDE;
+ switch (dev->phy.speed) {
+ case SPEED_1000:
+ if (emac_phy_gpcs(dev->phy.mode)) {
+ r |= EMAC_MR1_MF_1000GPCS |
+ EMAC_MR1_MF_IPPA(dev->phy.address);
+
+ /* Put some arbitrary OUI, Manuf & Rev IDs so we can
+ * identify this GPCS PHY later.
+ */
+ out_be32(&p->ipcr, 0xdeadbeef);
+ } else
+ r |= EMAC_MR1_MF_1000;
+ r |= EMAC_MR1_RFS_16K;
+ gige = 1;
+
+ if (dev->ndev->mtu > ETH_DATA_LEN)
+ r |= EMAC_MR1_JPSM;
+ break;
+ case SPEED_100:
+ r |= EMAC_MR1_MF_100;
+ /* Fall through */
+ default:
+ r |= EMAC_MR1_RFS_4K;
+ gige = 0;
+ break;
+ }
+
+ if (dev->rgmii_dev)
+ rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input,
+ dev->phy.speed);
+ else
+ zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed);
+
+#if !defined(CONFIG_40x)
+ /* on 40x erratum forces us to NOT use integrated flow control,
+ * let's hope it works on 44x ;)
+ */
+ if (dev->phy.duplex == DUPLEX_FULL) {
+ if (dev->phy.pause)
+ r |= EMAC_MR1_EIFC | EMAC_MR1_APP;
+ else if (dev->phy.asym_pause)
+ r |= EMAC_MR1_APP;
+ }
+#endif
+ out_be32(&p->mr1, r);
+
+ /* Set individual MAC address */
+ out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]);
+ out_be32(&p->ialr, (ndev->dev_addr[2] << 24) |
+ (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) |
+ ndev->dev_addr[5]);
+
+ /* VLAN Tag Protocol ID */
+ out_be32(&p->vtpid, 0x8100);
+
+ /* Receive mode register */
+ r = emac_iff2rmr(ndev);
+ if (r & EMAC_RMR_MAE)
+ emac_hash_mc(dev);
+ out_be32(&p->rmr, r);
+
+ /* FIFOs thresholds */
+ r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1,
+ EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE);
+ out_be32(&p->tmr1, r);
+ out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2));
+
+ /* PAUSE frame is sent when RX FIFO reaches its high-water mark,
+ there should be still enough space in FIFO to allow the our link
+ partner time to process this frame and also time to send PAUSE
+ frame itself.
+
+ Here is the worst case scenario for the RX FIFO "headroom"
+ (from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
+
+ 1) One maximum-length frame on TX 1522 bytes
+ 2) One PAUSE frame time 64 bytes
+ 3) PAUSE frame decode time allowance 64 bytes
+ 4) One maximum-length frame on RX 1522 bytes
+ 5) Round-trip propagation delay of the link (100Mb) 15 bytes
+ ----------
+ 3187 bytes
+
+ I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
+ low-water mark to RX_FIFO_SIZE / 8 (512 bytes)
+ */
+ r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE,
+ EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE);
+ out_be32(&p->rwmr, r);
+
+ /* Set PAUSE timer to the maximum */
+ out_be32(&p->ptr, 0xffff);
+
+ /* IRQ sources */
+ out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE |
+ EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE |
+ EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE |
+ EMAC_ISR_IRE | EMAC_ISR_TE);
+
+ /* We need to take GPCS PHY out of isolate mode after EMAC reset */
+ if (emac_phy_gpcs(dev->phy.mode))
+ mii_reset_phy(&dev->phy);
+
+ return 0;
+}
+
+/* BHs disabled */
+static void emac_reinitialize(struct ocp_enet_private *dev)
+{
+ DBG("%d: reinitialize" NL, dev->def->index);
+
+ if (!emac_configure(dev)) {
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+ }
+}
+
+/* BHs disabled */
+static void emac_full_tx_reset(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ DBG("%d: full_tx_reset" NL, dev->def->index);
+
+ emac_tx_disable(dev);
+ mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ emac_clean_tx_ring(dev);
+ dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0;
+
+ emac_configure(dev);
+
+ mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+
+ netif_wake_queue(ndev);
+}
+
+static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
+{
+ struct emac_regs *p = dev->emacp;
+ u32 r;
int n;
- spin_lock_irqsave(&fep->lock, flags);
- if ((n = emac_rx_clean(dev)) != fep->rx_slot)
- emac_rx_fill(dev, n);
- spin_unlock_irqrestore(&fep->lock, flags);
-}
+ DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg);
-/*
- * This interrupt should never occurr, we don't program
- * the MAL for contiunous mode.
- */
-static void emac_txde_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
+ /* Enable proper MDIO port */
+ zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
- printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name);
-
- emac_mac_dump(dev);
- emac_mal_dump(dev);
-
- /* Reenable the transmit channel */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-}
-
-/*
- * This interrupt should be very rare at best. This occurs when
- * the hardware has a problem with the receive descriptors. The manual
- * states that it occurs when the hardware cannot the receive descriptor
- * empty bit is not set. The recovery mechanism will be to
- * traverse through the descriptors, handle any that are marked to be
- * handled and reinitialize each along the way. At that point the driver
- * will be restarted.
- */
-static void emac_rxde_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
- unsigned long flags;
-
- if (net_ratelimit()) {
- printk(KERN_WARNING "%s: receive descriptor error\n",
- fep->ndev->name);
-
- emac_mac_dump(dev);
- emac_mal_dump(dev);
- emac_desc_dump(dev);
+ /* Wait for management interface to become idle */
+ n = 10;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
}
- /* Disable RX channel */
- spin_lock_irqsave(&fep->lock, flags);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
+ /* Issue read command */
+ out_be32(&p->stacr,
+ EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
+ (reg & EMAC_STACR_PRA_MASK)
+ | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT));
- /* For now, charge the error against all emacs */
- fep->stats.rx_errors++;
+ /* Wait for read to complete */
+ n = 100;
+ while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
- /* so do we have any good packets still? */
- emac_rx_clean(dev);
+ if (unlikely(r & EMAC_STACR_PHYE)) {
+ DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index,
+ id, reg);
+ return -EREMOTEIO;
+ }
- /* When the interface is restarted it resets processing to the
- * first descriptor in the table.
+ r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK);
+ DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r);
+ return r;
+ to:
+ DBG("%d: MII management interface timeout (read)" NL, dev->def->index);
+ return -ETIMEDOUT;
+}
+
+static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
+ u16 val)
+{
+ struct emac_regs *p = dev->emacp;
+ int n;
+
+ DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg,
+ val);
+
+ /* Enable proper MDIO port */
+ zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
+
+ /* Wait for management interface to be idle */
+ n = 10;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
+
+ /* Issue write command */
+ out_be32(&p->stacr,
+ EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
+ (reg & EMAC_STACR_PRA_MASK) |
+ ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
+ (val << EMAC_STACR_PHYD_SHIFT));
+
+ /* Wait for write to complete */
+ n = 100;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
+ return;
+ to:
+ DBG("%d: MII management interface timeout (write)" NL, dev->def->index);
+}
+
+static int emac_mdio_read(struct net_device *ndev, int id, int reg)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int res;
+
+ local_bh_disable();
+ res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
+ (u8) reg);
+ local_bh_enable();
+ return res;
+}
+
+static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ local_bh_disable();
+ __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
+ (u8) reg, (u16) val);
+ local_bh_enable();
+}
+
+/* BHs disabled */
+static void emac_set_multicast_list(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct emac_regs *p = dev->emacp;
+ u32 rmr = emac_iff2rmr(ndev);
+
+ DBG("%d: multicast %08x" NL, dev->def->index, rmr);
+ BUG_ON(!netif_running(dev->ndev));
+
+ /* I decided to relax register access rules here to avoid
+ * full EMAC reset.
+ *
+ * There is a real problem with EMAC4 core if we use MWSW_001 bit
+ * in MR1 register and do a full EMAC reset.
+ * One TX BD status update is delayed and, after EMAC reset, it
+ * never happens, resulting in TX hung (it'll be recovered by TX
+ * timeout handler eventually, but this is just gross).
+ * So we either have to do full TX reset or try to cheat here :)
+ *
+ * The only required change is to RX mode register, so I *think* all
+ * we need is just to stop RX channel. This seems to work on all
+ * tested SoCs. --ebs
*/
-
- fep->rx_slot = 0;
- emac_rx_fill(dev, 0);
-
- set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask);
- set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask);
-
- /* Reenable the receive channels */
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- spin_unlock_irqrestore(&fep->lock, flags);
+ emac_rx_disable(dev);
+ if (rmr & EMAC_RMR_MAE)
+ emac_hash_mc(dev);
+ out_be32(&p->rmr, rmr);
+ emac_rx_enable(dev);
}
-static irqreturn_t
-emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs)
+/* BHs disabled */
+static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu)
{
- struct net_device *dev = dev_instance;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- unsigned long tmp_em0isr;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+ int rx_sync_size = emac_rx_sync_size(new_mtu);
+ int rx_skb_size = emac_rx_skb_size(new_mtu);
+ int i, ret = 0;
- /* EMAC interrupt */
- tmp_em0isr = in_be32(&emacp->em0isr);
- if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) {
- /* This error is a hard transmit error - could retransmit */
- fep->stats.tx_errors++;
+ emac_rx_disable(dev);
+ mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
- /* Reenable the transmit channel */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-
- } else {
- fep->stats.rx_errors++;
+ if (dev->rx_sg_skb) {
+ ++dev->estats.rx_dropped_resize;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
}
- if (tmp_em0isr & EMAC_ISR_RP)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_ALE)
- fep->stats.rx_frame_errors++;
- if (tmp_em0isr & EMAC_ISR_BFCS)
- fep->stats.rx_crc_errors++;
- if (tmp_em0isr & EMAC_ISR_PTLE)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_ORE)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_TE0)
- fep->stats.tx_aborted_errors++;
+ /* Make a first pass over RX ring and mark BDs ready, dropping
+ * non-processed packets on the way. We need this as a separate pass
+ * to simplify error recovery in the case of allocation failure later.
+ */
+ for (i = 0; i < NUM_RX_BUFF; ++i) {
+ if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST)
+ ++dev->estats.rx_dropped_resize;
- emac_err_dump(dev, tmp_em0isr);
+ dev->rx_desc[i].data_len = 0;
+ dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY |
+ (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+ }
- out_be32(&emacp->em0isr, tmp_em0isr);
+ /* Reallocate RX ring only if bigger skb buffers are required */
+ if (rx_skb_size <= dev->rx_skb_size)
+ goto skip;
+
+ /* Second pass, allocate new skbs */
+ for (i = 0; i < NUM_RX_BUFF; ++i) {
+ struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
+ if (!skb) {
+ ret = -ENOMEM;
+ goto oom;
+ }
+
+ BUG_ON(!dev->rx_skb[i]);
+ dev_kfree_skb(dev->rx_skb[i]);
+
+ skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
+ dev->rx_desc[i].data_ptr =
+ dma_map_single(dev->ldev, skb->data - 2, rx_sync_size,
+ DMA_FROM_DEVICE) + 2;
+ dev->rx_skb[i] = skb;
+ }
+ skip:
+ /* Check if we need to change "Jumbo" bit in MR1 */
+ if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
+ /* This is to prevent starting RX channel in emac_rx_enable() */
+ dev->commac.rx_stopped = 1;
+
+ dev->ndev->mtu = new_mtu;
+ emac_full_tx_reset(dev->ndev);
+ }
+
+ mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu));
+ oom:
+ /* Restart RX */
+ dev->commac.rx_stopped = dev->rx_slot = 0;
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_rx_enable(dev);
+
+ return ret;
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_change_mtu(struct net_device *ndev, int new_mtu)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int ret = 0;
+
+ if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU)
+ return -EINVAL;
+
+ DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu);
+
+ local_bh_disable();
+ if (netif_running(ndev)) {
+ /* Check if we really need to reinitalize RX ring */
+ if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
+ ret = emac_resize_rx_ring(dev, new_mtu);
+ }
+
+ if (!ret) {
+ ndev->mtu = new_mtu;
+ dev->rx_skb_size = emac_rx_skb_size(new_mtu);
+ dev->rx_sync_size = emac_rx_sync_size(new_mtu);
+ }
+ local_bh_enable();
+
+ return ret;
+}
+
+static void emac_clean_tx_ring(struct ocp_enet_private *dev)
+{
+ int i;
+ for (i = 0; i < NUM_TX_BUFF; ++i) {
+ if (dev->tx_skb[i]) {
+ dev_kfree_skb(dev->tx_skb[i]);
+ dev->tx_skb[i] = NULL;
+ if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY)
+ ++dev->estats.tx_dropped;
+ }
+ dev->tx_desc[i].ctrl = 0;
+ dev->tx_desc[i].data_ptr = 0;
+ }
+}
+
+static void emac_clean_rx_ring(struct ocp_enet_private *dev)
+{
+ int i;
+ for (i = 0; i < NUM_RX_BUFF; ++i)
+ if (dev->rx_skb[i]) {
+ dev->rx_desc[i].ctrl = 0;
+ dev_kfree_skb(dev->rx_skb[i]);
+ dev->rx_skb[i] = NULL;
+ dev->rx_desc[i].data_ptr = 0;
+ }
+
+ if (dev->rx_sg_skb) {
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ }
+}
+
+static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot,
+ int flags)
+{
+ struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ dev->rx_skb[slot] = skb;
+ dev->rx_desc[slot].data_len = 0;
+
+ skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
+ dev->rx_desc[slot].data_ptr =
+ dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size,
+ DMA_FROM_DEVICE) + 2;
+ barrier();
+ dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
+ (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+
+ return 0;
+}
+
+static void emac_print_link_status(struct ocp_enet_private *dev)
+{
+ if (netif_carrier_ok(dev->ndev))
+ printk(KERN_INFO "%s: link is up, %d %s%s\n",
+ dev->ndev->name, dev->phy.speed,
+ dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX",
+ dev->phy.pause ? ", pause enabled" :
+ dev->phy.asym_pause ? ", assymetric pause enabled" : "");
+ else
+ printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_open(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+ int err, i;
+
+ DBG("%d: open" NL, dev->def->index);
+
+ /* Setup error IRQ handler */
+ err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to request IRQ %d\n",
+ ndev->name, dev->def->irq);
+ return err;
+ }
+
+ /* Allocate RX ring */
+ for (i = 0; i < NUM_RX_BUFF; ++i)
+ if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
+ printk(KERN_ERR "%s: failed to allocate RX ring\n",
+ ndev->name);
+ goto oom;
+ }
+
+ local_bh_disable();
+ dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot =
+ dev->commac.rx_stopped = 0;
+ dev->rx_sg_skb = NULL;
+
+ if (dev->phy.address >= 0) {
+ int link_poll_interval;
+ if (dev->phy.def->ops->poll_link(&dev->phy)) {
+ dev->phy.def->ops->read_link(&dev->phy);
+ EMAC_RX_CLK_DEFAULT(dev->def->index);
+ netif_carrier_on(dev->ndev);
+ link_poll_interval = PHY_POLL_LINK_ON;
+ } else {
+ EMAC_RX_CLK_TX(dev->def->index);
+ netif_carrier_off(dev->ndev);
+ link_poll_interval = PHY_POLL_LINK_OFF;
+ }
+ mod_timer(&dev->link_timer, jiffies + link_poll_interval);
+ emac_print_link_status(dev);
+ } else
+ netif_carrier_on(dev->ndev);
+
+ emac_configure(dev);
+ mal_poll_add(dev->mal, &dev->commac);
+ mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu));
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+ netif_start_queue(ndev);
+ local_bh_enable();
+
+ return 0;
+ oom:
+ emac_clean_rx_ring(dev);
+ free_irq(dev->def->irq, dev);
+ return -ENOMEM;
+}
+
+/* BHs disabled */
+static int emac_link_differs(struct ocp_enet_private *dev)
+{
+ u32 r = in_be32(&dev->emacp->mr1);
+
+ int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF;
+ int speed, pause, asym_pause;
+
+ if (r & (EMAC_MR1_MF_1000 | EMAC_MR1_MF_1000GPCS))
+ speed = SPEED_1000;
+ else if (r & EMAC_MR1_MF_100)
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+
+ switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) {
+ case (EMAC_MR1_EIFC | EMAC_MR1_APP):
+ pause = 1;
+ asym_pause = 0;
+ break;
+ case EMAC_MR1_APP:
+ pause = 0;
+ asym_pause = 1;
+ break;
+ default:
+ pause = asym_pause = 0;
+ }
+ return speed != dev->phy.speed || duplex != dev->phy.duplex ||
+ pause != dev->phy.pause || asym_pause != dev->phy.asym_pause;
+}
+
+/* BHs disabled */
+static void emac_link_timer(unsigned long data)
+{
+ struct ocp_enet_private *dev = (struct ocp_enet_private *)data;
+ int link_poll_interval;
+
+ DBG2("%d: link timer" NL, dev->def->index);
+
+ if (dev->phy.def->ops->poll_link(&dev->phy)) {
+ if (!netif_carrier_ok(dev->ndev)) {
+ EMAC_RX_CLK_DEFAULT(dev->def->index);
+
+ /* Get new link parameters */
+ dev->phy.def->ops->read_link(&dev->phy);
+
+ if (dev->tah_dev || emac_link_differs(dev))
+ emac_full_tx_reset(dev->ndev);
+
+ netif_carrier_on(dev->ndev);
+ emac_print_link_status(dev);
+ }
+ link_poll_interval = PHY_POLL_LINK_ON;
+ } else {
+ if (netif_carrier_ok(dev->ndev)) {
+ EMAC_RX_CLK_TX(dev->def->index);
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
+ emac_reinitialize(dev);
+#endif
+ netif_carrier_off(dev->ndev);
+ emac_print_link_status(dev);
+ }
+
+ /* Retry reset if the previous attempt failed.
+ * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX
+ * case, but I left it here because it shouldn't trigger for
+ * sane PHYs anyway.
+ */
+ if (unlikely(dev->reset_failed))
+ emac_reinitialize(dev);
+
+ link_poll_interval = PHY_POLL_LINK_OFF;
+ }
+ mod_timer(&dev->link_timer, jiffies + link_poll_interval);
+}
+
+/* BHs disabled */
+static void emac_force_link_update(struct ocp_enet_private *dev)
+{
+ netif_carrier_off(dev->ndev);
+ if (timer_pending(&dev->link_timer))
+ mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF);
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_close(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ DBG("%d: close" NL, dev->def->index);
+
+ local_bh_disable();
+
+ if (dev->phy.address >= 0)
+ del_timer_sync(&dev->link_timer);
+
+ netif_stop_queue(ndev);
+ emac_rx_disable(dev);
+ emac_tx_disable(dev);
+ mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ mal_poll_del(dev->mal, &dev->commac);
+ local_bh_enable();
+
+ emac_clean_tx_ring(dev);
+ emac_clean_rx_ring(dev);
+ free_irq(dev->def->irq, dev);
+
+ return 0;
+}
+
+static inline u16 emac_tx_csum(struct ocp_enet_private *dev,
+ struct sk_buff *skb)
+{
+#if defined(CONFIG_IBM_EMAC_TAH)
+ if (skb->ip_summed == CHECKSUM_HW) {
+ ++dev->stats.tx_packets_csum;
+ return EMAC_TX_CTRL_TAH_CSUM;
+ }
+#endif
+ return 0;
+}
+
+static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len)
+{
+ struct emac_regs *p = dev->emacp;
+ struct net_device *ndev = dev->ndev;
+
+ /* Send the packet out */
+ out_be32(&p->tmr0, EMAC_TMR0_XMIT);
+
+ if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) {
+ netif_stop_queue(ndev);
+ DBG2("%d: stopped TX queue" NL, dev->def->index);
+ }
+
+ ndev->trans_start = jiffies;
+ ++dev->stats.tx_packets;
+ dev->stats.tx_bytes += len;
+
+ return 0;
+}
+
+/* BHs disabled */
+static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ unsigned int len = skb->len;
+ int slot;
+
+ u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
+ MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb);
+
+ slot = dev->tx_slot++;
+ if (dev->tx_slot == NUM_TX_BUFF) {
+ dev->tx_slot = 0;
+ ctrl |= MAL_TX_CTRL_WRAP;
+ }
+
+ DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot);
+
+ dev->tx_skb[slot] = skb;
+ dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len,
+ DMA_TO_DEVICE);
+ dev->tx_desc[slot].data_len = (u16) len;
+ barrier();
+ dev->tx_desc[slot].ctrl = ctrl;
+
+ return emac_xmit_finish(dev, len);
+}
+
+#if defined(CONFIG_IBM_EMAC_TAH)
+static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot,
+ u32 pd, int len, int last, u16 base_ctrl)
+{
+ while (1) {
+ u16 ctrl = base_ctrl;
+ int chunk = min(len, MAL_MAX_TX_SIZE);
+ len -= chunk;
+
+ slot = (slot + 1) % NUM_TX_BUFF;
+
+ if (last && !len)
+ ctrl |= MAL_TX_CTRL_LAST;
+ if (slot == NUM_TX_BUFF - 1)
+ ctrl |= MAL_TX_CTRL_WRAP;
+
+ dev->tx_skb[slot] = NULL;
+ dev->tx_desc[slot].data_ptr = pd;
+ dev->tx_desc[slot].data_len = (u16) chunk;
+ dev->tx_desc[slot].ctrl = ctrl;
+ ++dev->tx_cnt;
+
+ if (!len)
+ break;
+
+ pd += chunk;
+ }
+ return slot;
+}
+
+/* BHs disabled (SG version for TAH equipped EMACs) */
+static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ int len = skb->len, chunk;
+ int slot, i;
+ u16 ctrl;
+ u32 pd;
+
+ /* This is common "fast" path */
+ if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE))
+ return emac_start_xmit(skb, ndev);
+
+ len -= skb->data_len;
+
+ /* Note, this is only an *estimation*, we can still run out of empty
+ * slots because of the additional fragmentation into
+ * MAL_MAX_TX_SIZE-sized chunks
+ */
+ if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF))
+ goto stop_queue;
+
+ ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
+ emac_tx_csum(dev, skb);
+ slot = dev->tx_slot;
+
+ /* skb data */
+ dev->tx_skb[slot] = NULL;
+ chunk = min(len, MAL_MAX_TX_SIZE);
+ dev->tx_desc[slot].data_ptr = pd =
+ dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE);
+ dev->tx_desc[slot].data_len = (u16) chunk;
+ len -= chunk;
+ if (unlikely(len))
+ slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags,
+ ctrl);
+ /* skb fragments */
+ for (i = 0; i < nr_frags; ++i) {
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+ len = frag->size;
+
+ if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF))
+ goto undo_frame;
+
+ pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len,
+ DMA_TO_DEVICE);
+
+ slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1,
+ ctrl);
+ }
+
+ DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len,
+ dev->tx_slot, slot);
+
+ /* Attach skb to the last slot so we don't release it too early */
+ dev->tx_skb[slot] = skb;
+
+ /* Send the packet out */
+ if (dev->tx_slot == NUM_TX_BUFF - 1)
+ ctrl |= MAL_TX_CTRL_WRAP;
+ barrier();
+ dev->tx_desc[dev->tx_slot].ctrl = ctrl;
+ dev->tx_slot = (slot + 1) % NUM_TX_BUFF;
+
+ return emac_xmit_finish(dev, skb->len);
+
+ undo_frame:
+ /* Well, too bad. Our previous estimation was overly optimistic.
+ * Undo everything.
+ */
+ while (slot != dev->tx_slot) {
+ dev->tx_desc[slot].ctrl = 0;
+ --dev->tx_cnt;
+ if (--slot < 0)
+ slot = NUM_TX_BUFF - 1;
+ }
+ ++dev->estats.tx_undo;
+
+ stop_queue:
+ netif_stop_queue(ndev);
+ DBG2("%d: stopped TX queue" NL, dev->def->index);
+ return 1;
+}
+#else
+# define emac_start_xmit_sg emac_start_xmit
+#endif /* !defined(CONFIG_IBM_EMAC_TAH) */
+
+/* BHs disabled */
+static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl)
+{
+ struct ibm_emac_error_stats *st = &dev->estats;
+ DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl);
+
+ ++st->tx_bd_errors;
+ if (ctrl & EMAC_TX_ST_BFCS)
+ ++st->tx_bd_bad_fcs;
+ if (ctrl & EMAC_TX_ST_LCS)
+ ++st->tx_bd_carrier_loss;
+ if (ctrl & EMAC_TX_ST_ED)
+ ++st->tx_bd_excessive_deferral;
+ if (ctrl & EMAC_TX_ST_EC)
+ ++st->tx_bd_excessive_collisions;
+ if (ctrl & EMAC_TX_ST_LC)
+ ++st->tx_bd_late_collision;
+ if (ctrl & EMAC_TX_ST_MC)
+ ++st->tx_bd_multple_collisions;
+ if (ctrl & EMAC_TX_ST_SC)
+ ++st->tx_bd_single_collision;
+ if (ctrl & EMAC_TX_ST_UR)
+ ++st->tx_bd_underrun;
+ if (ctrl & EMAC_TX_ST_SQE)
+ ++st->tx_bd_sqe;
+}
+
+static void emac_poll_tx(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt,
+ dev->ack_slot);
+
+ if (dev->tx_cnt) {
+ u16 ctrl;
+ int slot = dev->ack_slot, n = 0;
+ again:
+ ctrl = dev->tx_desc[slot].ctrl;
+ if (!(ctrl & MAL_TX_CTRL_READY)) {
+ struct sk_buff *skb = dev->tx_skb[slot];
+ ++n;
+
+ if (skb) {
+ dev_kfree_skb(skb);
+ dev->tx_skb[slot] = NULL;
+ }
+ slot = (slot + 1) % NUM_TX_BUFF;
+
+ if (unlikely(EMAC_IS_BAD_TX(ctrl)))
+ emac_parse_tx_error(dev, ctrl);
+
+ if (--dev->tx_cnt)
+ goto again;
+ }
+ if (n) {
+ dev->ack_slot = slot;
+ if (netif_queue_stopped(dev->ndev) &&
+ dev->tx_cnt < EMAC_TX_WAKEUP_THRESH)
+ netif_wake_queue(dev->ndev);
+
+ DBG2("%d: tx %d pkts" NL, dev->def->index, n);
+ }
+ }
+}
+
+static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot,
+ int len)
+{
+ struct sk_buff *skb = dev->rx_skb[slot];
+ DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len);
+
+ if (len)
+ dma_map_single(dev->ldev, skb->data - 2,
+ EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
+
+ dev->rx_desc[slot].data_len = 0;
+ barrier();
+ dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
+ (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+}
+
+static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl)
+{
+ struct ibm_emac_error_stats *st = &dev->estats;
+ DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl);
+
+ ++st->rx_bd_errors;
+ if (ctrl & EMAC_RX_ST_OE)
+ ++st->rx_bd_overrun;
+ if (ctrl & EMAC_RX_ST_BP)
+ ++st->rx_bd_bad_packet;
+ if (ctrl & EMAC_RX_ST_RP)
+ ++st->rx_bd_runt_packet;
+ if (ctrl & EMAC_RX_ST_SE)
+ ++st->rx_bd_short_event;
+ if (ctrl & EMAC_RX_ST_AE)
+ ++st->rx_bd_alignment_error;
+ if (ctrl & EMAC_RX_ST_BFCS)
+ ++st->rx_bd_bad_fcs;
+ if (ctrl & EMAC_RX_ST_PTL)
+ ++st->rx_bd_packet_too_long;
+ if (ctrl & EMAC_RX_ST_ORE)
+ ++st->rx_bd_out_of_range;
+ if (ctrl & EMAC_RX_ST_IRE)
+ ++st->rx_bd_in_range;
+}
+
+static inline void emac_rx_csum(struct ocp_enet_private *dev,
+ struct sk_buff *skb, u16 ctrl)
+{
+#if defined(CONFIG_IBM_EMAC_TAH)
+ if (!ctrl && dev->tah_dev) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ ++dev->stats.rx_packets_csum;
+ }
+#endif
+}
+
+static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot)
+{
+ if (likely(dev->rx_sg_skb != NULL)) {
+ int len = dev->rx_desc[slot].data_len;
+ int tot_len = dev->rx_sg_skb->len + len;
+
+ if (unlikely(tot_len + 2 > dev->rx_skb_size)) {
+ ++dev->estats.rx_dropped_mtu;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ } else {
+ cacheable_memcpy(dev->rx_sg_skb->tail,
+ dev->rx_skb[slot]->data, len);
+ skb_put(dev->rx_sg_skb, len);
+ emac_recycle_rx_skb(dev, slot, len);
+ return 0;
+ }
+ }
+ emac_recycle_rx_skb(dev, slot, 0);
+ return -1;
+}
+
+/* BHs disabled */
+static int emac_poll_rx(void *param, int budget)
+{
+ struct ocp_enet_private *dev = param;
+ int slot = dev->rx_slot, received = 0;
+
+ DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget);
+
+ again:
+ while (budget > 0) {
+ int len;
+ struct sk_buff *skb;
+ u16 ctrl = dev->rx_desc[slot].ctrl;
+
+ if (ctrl & MAL_RX_CTRL_EMPTY)
+ break;
+
+ skb = dev->rx_skb[slot];
+ barrier();
+ len = dev->rx_desc[slot].data_len;
+
+ if (unlikely(!MAL_IS_SINGLE_RX(ctrl)))
+ goto sg;
+
+ ctrl &= EMAC_BAD_RX_MASK;
+ if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
+ emac_parse_rx_error(dev, ctrl);
+ ++dev->estats.rx_dropped_error;
+ emac_recycle_rx_skb(dev, slot, 0);
+ len = 0;
+ goto next;
+ }
+
+ if (len && len < EMAC_RX_COPY_THRESH) {
+ struct sk_buff *copy_skb =
+ alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
+ if (unlikely(!copy_skb))
+ goto oom;
+
+ skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
+ cacheable_memcpy(copy_skb->data - 2, skb->data - 2,
+ len + 2);
+ emac_recycle_rx_skb(dev, slot, len);
+ skb = copy_skb;
+ } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
+ goto oom;
+
+ skb_put(skb, len);
+ push_packet:
+ skb->dev = dev->ndev;
+ skb->protocol = eth_type_trans(skb, dev->ndev);
+ emac_rx_csum(dev, skb, ctrl);
+
+ if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
+ ++dev->estats.rx_dropped_stack;
+ next:
+ ++dev->stats.rx_packets;
+ skip:
+ dev->stats.rx_bytes += len;
+ slot = (slot + 1) % NUM_RX_BUFF;
+ --budget;
+ ++received;
+ continue;
+ sg:
+ if (ctrl & MAL_RX_CTRL_FIRST) {
+ BUG_ON(dev->rx_sg_skb);
+ if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
+ DBG("%d: rx OOM %d" NL, dev->def->index, slot);
+ ++dev->estats.rx_dropped_oom;
+ emac_recycle_rx_skb(dev, slot, 0);
+ } else {
+ dev->rx_sg_skb = skb;
+ skb_put(skb, len);
+ }
+ } else if (!emac_rx_sg_append(dev, slot) &&
+ (ctrl & MAL_RX_CTRL_LAST)) {
+
+ skb = dev->rx_sg_skb;
+ dev->rx_sg_skb = NULL;
+
+ ctrl &= EMAC_BAD_RX_MASK;
+ if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
+ emac_parse_rx_error(dev, ctrl);
+ ++dev->estats.rx_dropped_error;
+ dev_kfree_skb(skb);
+ len = 0;
+ } else
+ goto push_packet;
+ }
+ goto skip;
+ oom:
+ DBG("%d: rx OOM %d" NL, dev->def->index, slot);
+ /* Drop the packet and recycle skb */
+ ++dev->estats.rx_dropped_oom;
+ emac_recycle_rx_skb(dev, slot, 0);
+ goto next;
+ }
+
+ if (received) {
+ DBG2("%d: rx %d BDs" NL, dev->def->index, received);
+ dev->rx_slot = slot;
+ }
+
+ if (unlikely(budget && dev->commac.rx_stopped)) {
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ barrier();
+ if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) {
+ DBG2("%d: rx restart" NL, dev->def->index);
+ received = 0;
+ goto again;
+ }
+
+ if (dev->rx_sg_skb) {
+ DBG2("%d: dropping partial rx packet" NL,
+ dev->def->index);
+ ++dev->estats.rx_dropped_error;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ }
+
+ dev->commac.rx_stopped = 0;
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_rx_enable(dev);
+ dev->rx_slot = 0;
+ }
+ return received;
+}
+
+/* BHs disabled */
+static int emac_peek_rx(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY);
+}
+
+/* BHs disabled */
+static int emac_peek_rx_sg(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ int slot = dev->rx_slot;
+ while (1) {
+ u16 ctrl = dev->rx_desc[slot].ctrl;
+ if (ctrl & MAL_RX_CTRL_EMPTY)
+ return 0;
+ else if (ctrl & MAL_RX_CTRL_LAST)
+ return 1;
+
+ slot = (slot + 1) % NUM_RX_BUFF;
+
+ /* I'm just being paranoid here :) */
+ if (unlikely(slot == dev->rx_slot))
+ return 0;
+ }
+}
+
+/* Hard IRQ */
+static void emac_rxde(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ ++dev->estats.rx_stopped;
+ emac_rx_disable_async(dev);
+}
+
+/* Hard IRQ */
+static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ocp_enet_private *dev = dev_instance;
+ struct emac_regs *p = dev->emacp;
+ struct ibm_emac_error_stats *st = &dev->estats;
+
+ u32 isr = in_be32(&p->isr);
+ out_be32(&p->isr, isr);
+
+ DBG("%d: isr = %08x" NL, dev->def->index, isr);
+
+ if (isr & EMAC_ISR_TXPE)
+ ++st->tx_parity;
+ if (isr & EMAC_ISR_RXPE)
+ ++st->rx_parity;
+ if (isr & EMAC_ISR_TXUE)
+ ++st->tx_underrun;
+ if (isr & EMAC_ISR_RXOE)
+ ++st->rx_fifo_overrun;
+ if (isr & EMAC_ISR_OVR)
+ ++st->rx_overrun;
+ if (isr & EMAC_ISR_BP)
+ ++st->rx_bad_packet;
+ if (isr & EMAC_ISR_RP)
+ ++st->rx_runt_packet;
+ if (isr & EMAC_ISR_SE)
+ ++st->rx_short_event;
+ if (isr & EMAC_ISR_ALE)
+ ++st->rx_alignment_error;
+ if (isr & EMAC_ISR_BFCS)
+ ++st->rx_bad_fcs;
+ if (isr & EMAC_ISR_PTLE)
+ ++st->rx_packet_too_long;
+ if (isr & EMAC_ISR_ORE)
+ ++st->rx_out_of_range;
+ if (isr & EMAC_ISR_IRE)
+ ++st->rx_in_range;
+ if (isr & EMAC_ISR_SQE)
+ ++st->tx_sqe;
+ if (isr & EMAC_ISR_TE)
+ ++st->tx_errors;
return IRQ_HANDLED;
}
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static struct net_device_stats *emac_stats(struct net_device *ndev)
{
- unsigned short ctrl;
- unsigned long flags;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- int len = skb->len;
- unsigned int offset = 0, size, f, tx_slot_first;
- unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ibm_emac_stats *st = &dev->stats;
+ struct ibm_emac_error_stats *est = &dev->estats;
+ struct net_device_stats *nst = &dev->nstats;
- spin_lock_irqsave(&fep->lock, flags);
+ DBG2("%d: stats" NL, dev->def->index);
- len -= skb->data_len;
+ /* Compute "legacy" statistics */
+ local_irq_disable();
+ nst->rx_packets = (unsigned long)st->rx_packets;
+ nst->rx_bytes = (unsigned long)st->rx_bytes;
+ nst->tx_packets = (unsigned long)st->tx_packets;
+ nst->tx_bytes = (unsigned long)st->tx_bytes;
+ nst->rx_dropped = (unsigned long)(est->rx_dropped_oom +
+ est->rx_dropped_error +
+ est->rx_dropped_resize +
+ est->rx_dropped_mtu);
+ nst->tx_dropped = (unsigned long)est->tx_dropped;
- if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) {
- PKT_DEBUG(("emac_start_xmit() stopping queue\n"));
- netif_stop_queue(dev);
- spin_unlock_irqrestore(&fep->lock, flags);
- return -EBUSY;
- }
+ nst->rx_errors = (unsigned long)est->rx_bd_errors;
+ nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun +
+ est->rx_fifo_overrun +
+ est->rx_overrun);
+ nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error +
+ est->rx_alignment_error);
+ nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs +
+ est->rx_bad_fcs);
+ nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet +
+ est->rx_bd_short_event +
+ est->rx_bd_packet_too_long +
+ est->rx_bd_out_of_range +
+ est->rx_bd_in_range +
+ est->rx_runt_packet +
+ est->rx_short_event +
+ est->rx_packet_too_long +
+ est->rx_out_of_range +
+ est->rx_in_range);
- tx_slot_first = fep->tx_slot;
-
- while (len) {
- size = min(len, DESC_BUF_SIZE);
-
- fep->tx_desc[fep->tx_slot].data_len = (short)size;
- fep->tx_desc[fep->tx_slot].data_ptr =
- (unsigned char *)dma_map_single(&fep->ocpdev->dev,
- (void *)((unsigned int)skb->
- data + offset),
- size, DMA_TO_DEVICE);
-
- ctrl = EMAC_TX_CTRL_DFLT;
- if (fep->tx_slot != tx_slot_first)
- ctrl |= MAL_TX_CTRL_READY;
- if ((NUM_TX_BUFF - 1) == fep->tx_slot)
- ctrl |= MAL_TX_CTRL_WRAP;
- if (!nr_frags && (len == size)) {
- ctrl |= MAL_TX_CTRL_LAST;
- fep->tx_skb[fep->tx_slot] = skb;
- }
- if (skb->ip_summed == CHECKSUM_HW)
- ctrl |= EMAC_TX_CTRL_TAH_CSUM;
-
- fep->tx_desc[fep->tx_slot].ctrl = ctrl;
-
- len -= size;
- offset += size;
-
- /* Bump tx count */
- if (++fep->tx_cnt == NUM_TX_BUFF)
- netif_stop_queue(dev);
-
- /* Next descriptor */
- if (++fep->tx_slot == NUM_TX_BUFF)
- fep->tx_slot = 0;
- }
-
- for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = frag->size;
- offset = 0;
-
- while (len) {
- size = min(len, DESC_BUF_SIZE);
-
- dma_map_page(&fep->ocpdev->dev,
- frag->page,
- frag->page_offset + offset,
- size, DMA_TO_DEVICE);
-
- ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY;
- if ((NUM_TX_BUFF - 1) == fep->tx_slot)
- ctrl |= MAL_TX_CTRL_WRAP;
- if ((f == (nr_frags - 1)) && (len == size)) {
- ctrl |= MAL_TX_CTRL_LAST;
- fep->tx_skb[fep->tx_slot] = skb;
- }
-
- if (skb->ip_summed == CHECKSUM_HW)
- ctrl |= EMAC_TX_CTRL_TAH_CSUM;
-
- fep->tx_desc[fep->tx_slot].data_len = (short)size;
- fep->tx_desc[fep->tx_slot].data_ptr =
- (char *)((page_to_pfn(frag->page) << PAGE_SHIFT) +
- frag->page_offset + offset);
- fep->tx_desc[fep->tx_slot].ctrl = ctrl;
-
- len -= size;
- offset += size;
-
- /* Bump tx count */
- if (++fep->tx_cnt == NUM_TX_BUFF)
- netif_stop_queue(dev);
-
- /* Next descriptor */
- if (++fep->tx_slot == NUM_TX_BUFF)
- fep->tx_slot = 0;
- }
- }
-
- /*
- * Deferred set READY on first descriptor of packet to
- * avoid TX MAL race.
- */
- fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY;
-
- /* Send the packet out. */
- out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT);
-
- fep->stats.tx_packets++;
- fep->stats.tx_bytes += skb->len;
-
- PKT_DEBUG(("emac_start_xmit() exitn"));
-
- spin_unlock_irqrestore(&fep->lock, flags);
-
- return 0;
+ nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors);
+ nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun +
+ est->tx_underrun);
+ nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss;
+ nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral +
+ est->tx_bd_excessive_collisions +
+ est->tx_bd_late_collision +
+ est->tx_bd_multple_collisions);
+ local_irq_enable();
+ return nst;
}
-static int emac_adjust_to_link(struct ocp_enet_private *fep)
+static void emac_remove(struct ocp_device *ocpdev)
{
- emac_t *emacp = fep->emacp;
- unsigned long mode_reg;
- int full_duplex, speed;
+ struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev);
- full_duplex = 0;
- speed = SPEED_10;
+ DBG("%d: remove" NL, dev->def->index);
- /* set mode register 1 defaults */
- mode_reg = EMAC_M1_DEFAULT;
+ ocp_set_drvdata(ocpdev, 0);
+ unregister_netdev(dev->ndev);
- /* Read link mode on PHY */
- if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) {
- /* If an error occurred, we don't deal with it yet */
- full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL);
- speed = fep->phy_mii.speed;
- }
+ tah_fini(dev->tah_dev);
+ rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
+ zmii_fini(dev->zmii_dev, dev->zmii_input);
+ emac_dbg_register(dev->def->index, 0);
- /* set speed (default is 10Mb) */
- switch (speed) {
- case SPEED_1000:
- mode_reg |= EMAC_M1_RFS_16K;
- if (fep->rgmii_dev) {
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev);
-
- if ((rgmii->mode[fep->rgmii_input] == RTBI)
- || (rgmii->mode[fep->rgmii_input] == TBI))
- mode_reg |= EMAC_M1_MF_1000GPCS;
- else
- mode_reg |= EMAC_M1_MF_1000MBPS;
-
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 1000);
- }
- break;
- case SPEED_100:
- mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K;
- if (fep->rgmii_dev)
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 100);
- if (fep->zmii_dev)
- emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
- 100);
- break;
- case SPEED_10:
- default:
- mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K;
- if (fep->rgmii_dev)
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 10);
- if (fep->zmii_dev)
- emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
- 10);
- }
-
- if (full_duplex)
- mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST;
- else
- mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE);
-
- LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n",
- fep->ndev->name, speed, full_duplex, fep->opened));
-
- printk(KERN_INFO "%s: Speed: %d, %s duplex.\n",
- fep->ndev->name, speed, full_duplex ? "Full" : "Half");
- if (fep->opened)
- out_be32(&emacp->em0mr1, mode_reg);
-
- return 0;
+ mal_unregister_commac(dev->mal, &dev->commac);
+ iounmap((void *)dev->emacp);
+ kfree(dev->ndev);
}
-static int emac_set_mac_address(struct net_device *ndev, void *p)
+static struct mal_commac_ops emac_commac_ops = {
+ .poll_tx = &emac_poll_tx,
+ .poll_rx = &emac_poll_rx,
+ .peek_rx = &emac_peek_rx,
+ .rxde = &emac_rxde,
+};
+
+static struct mal_commac_ops emac_commac_sg_ops = {
+ .poll_tx = &emac_poll_tx,
+ .poll_rx = &emac_poll_rx,
+ .peek_rx = &emac_peek_rx_sg,
+ .rxde = &emac_rxde,
+};
+
+/* Ethtool support */
+static int emac_ethtool_get_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
{
- struct ocp_enet_private *fep = ndev->priv;
- emac_t *emacp = fep->emacp;
- struct sockaddr *addr = p;
+ struct ocp_enet_private *dev = ndev->priv;
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
-
- /* set the high address */
- out_be32(&emacp->em0iahr,
- (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
-
- /* set the low address */
- out_be32(&emacp->em0ialr,
- (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
- | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
-
- return 0;
-}
-
-static int emac_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct ocp_enet_private *fep = dev->priv;
- int old_mtu = dev->mtu;
- unsigned long mode_reg;
- emac_t *emacp = fep->emacp;
- u32 em0mr0;
- int i, full;
- unsigned long flags;
-
- if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) {
- printk(KERN_ERR
- "emac: Invalid MTU setting, MTU must be between %d and %d\n",
- EMAC_MIN_MTU, EMAC_MAX_MTU);
- return -EINVAL;
- }
-
- if (old_mtu != new_mtu && netif_running(dev)) {
- /* Stop rx engine */
- em0mr0 = in_be32(&emacp->em0mr0);
- out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE);
-
- /* Wait for descriptors to be empty */
- do {
- full = 0;
- for (i = 0; i < NUM_RX_BUFF; i++)
- if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) {
- printk(KERN_NOTICE
- "emac: RX ring is still full\n");
- full = 1;
- }
- } while (full);
-
- spin_lock_irqsave(&fep->lock, flags);
-
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /* Destroy all old rx skbs */
- for (i = 0; i < NUM_RX_BUFF; i++) {
- dma_unmap_single(&fep->ocpdev->dev,
- fep->rx_desc[i].data_ptr,
- fep->rx_desc[i].data_len,
- DMA_FROM_DEVICE);
- dev_kfree_skb(fep->rx_skb[i]);
- fep->rx_skb[i] = NULL;
- }
-
- /* Set new rx_buffer_size, jumbo cap, and advertise new mtu */
- mode_reg = in_be32(&emacp->em0mr1);
- if (new_mtu > ENET_DEF_MTU_SIZE) {
- mode_reg |= EMAC_M1_JUMBO_ENABLE;
- fep->rx_buffer_size = EMAC_MAX_FRAME;
- } else {
- mode_reg &= ~EMAC_M1_JUMBO_ENABLE;
- fep->rx_buffer_size = ENET_DEF_BUF_SIZE;
- }
- dev->mtu = new_mtu;
- out_be32(&emacp->em0mr1, mode_reg);
-
- /* Re-init rx skbs */
- fep->rx_slot = 0;
- emac_rx_fill(dev, 0);
-
- /* Restart the rx engine */
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE);
-
- spin_unlock_irqrestore(&fep->lock, flags);
- }
-
- return 0;
-}
-
-static void __emac_set_multicast_list(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- u32 rmr = in_be32(&emacp->em0rmr);
-
- /* First clear all special bits, they can be set later */
- rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE);
-
- if (dev->flags & IFF_PROMISC) {
- rmr |= EMAC_RMR_PME;
- } else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) {
- /*
- * Must be setting up to use multicast
- * Now check for promiscuous multicast
- */
- rmr |= EMAC_RMR_PMME;
- } else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) {
- unsigned short em0gaht[4] = { 0, 0, 0, 0 };
- struct dev_mc_list *dmi;
-
- /* Need to hash on the multicast address. */
- for (dmi = dev->mc_list; dmi; dmi = dmi->next) {
- unsigned long mc_crc;
- unsigned int bit_number;
-
- mc_crc = ether_crc(6, (char *)dmi->dmi_addr);
- bit_number = 63 - (mc_crc >> 26); /* MSB: 0 LSB: 63 */
- em0gaht[bit_number >> 4] |=
- 0x8000 >> (bit_number & 0x0f);
- }
- emacp->em0gaht1 = em0gaht[0];
- emacp->em0gaht2 = em0gaht[1];
- emacp->em0gaht3 = em0gaht[2];
- emacp->em0gaht4 = em0gaht[3];
-
- /* Turn on multicast addressing */
- rmr |= EMAC_RMR_MAE;
- }
- out_be32(&emacp->em0rmr, rmr);
-}
-
-static int emac_init_tah(struct ocp_enet_private *fep)
-{
- tah_t *tahp;
-
- /* Initialize TAH and enable checksum verification */
- tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp));
-
- if (tahp == NULL) {
- printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n",
- fep->tah_dev->def->index);
-
- return -ENOMEM;
- }
-
- out_be32(&tahp->tah_mr, TAH_MR_SR);
-
- /* wait for reset to complete */
- while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ;
-
- /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
- out_be32(&tahp->tah_mr,
- TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
- TAH_MR_DIG);
-
- iounmap(tahp);
-
- return 0;
-}
-
-static void emac_init_rings(struct net_device *dev)
-{
- struct ocp_enet_private *ep = dev->priv;
- int loop;
-
- ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr +
- (ep->mal_tx_chan *
- MAL_DT_ALIGN));
- ep->rx_desc =
- (struct mal_descriptor *)((char *)ep->mal->rx_virt_addr +
- (ep->mal_rx_chan * MAL_DT_ALIGN));
-
- /* Fill in the transmit descriptor ring. */
- for (loop = 0; loop < NUM_TX_BUFF; loop++) {
- if (ep->tx_skb[loop]) {
- dma_unmap_single(&ep->ocpdev->dev,
- ep->tx_desc[loop].data_ptr,
- ep->tx_desc[loop].data_len,
- DMA_TO_DEVICE);
- dev_kfree_skb_irq(ep->tx_skb[loop]);
- }
- ep->tx_skb[loop] = NULL;
- ep->tx_desc[loop].ctrl = 0;
- ep->tx_desc[loop].data_len = 0;
- ep->tx_desc[loop].data_ptr = NULL;
- }
- ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP;
-
- /* Format the receive descriptor ring. */
- ep->rx_slot = 0;
- /* Default is MTU=1500 + Ethernet overhead */
- ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE;
- emac_rx_fill(dev, 0);
- if (ep->rx_slot != 0) {
- printk(KERN_ERR
- "%s: Not enough mem for RxChain durning Open?\n",
- dev->name);
- /*We couldn't fill the ring at startup?
- *We could clean up and fail to open but right now we will try to
- *carry on. It may be a sign of a bad NUM_RX_BUFF value
- */
- }
-
- ep->tx_cnt = 0;
- ep->tx_slot = 0;
- ep->ack_slot = 0;
-}
-
-static void emac_reset_configure(struct ocp_enet_private *fep)
-{
- emac_t *emacp = fep->emacp;
- int i;
-
- mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /*
- * Check for a link, some PHYs don't provide a clock if
- * no link is present. Some EMACs will not come out of
- * soft reset without a PHY clock present.
- */
- if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
- /* Reset the EMAC */
- out_be32(&emacp->em0mr0, EMAC_M0_SRST);
- udelay(20);
- for (i = 0; i < 100; i++) {
- if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0)
- break;
- udelay(10);
- }
-
- if (i >= 100) {
- printk(KERN_ERR "%s: Cannot reset EMAC\n",
- fep->ndev->name);
- return;
- }
- }
-
- /* Switch IRQs off for now */
- out_be32(&emacp->em0iser, 0);
-
- /* Configure MAL rx channel */
- mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG);
-
- /* set the high address */
- out_be32(&emacp->em0iahr,
- (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
-
- /* set the low address */
- out_be32(&emacp->em0ialr,
- (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
- | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
-
- /* Adjust to link */
- if (netif_carrier_ok(fep->ndev))
- emac_adjust_to_link(fep);
-
- /* enable broadcast/individual address and RX FIFO defaults */
- out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT);
-
- /* set transmit request threshold register */
- out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT);
-
- /* Reconfigure multicast */
- __emac_set_multicast_list(fep->ndev);
-
- /* Set receiver/transmitter defaults */
- out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT);
- out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT);
- out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT);
-
- /* set frame gap */
- out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP);
-
- /* set VLAN Tag Protocol Identifier */
- out_be32(&emacp->em0vtpid, 0x8100);
-
- /* Init ring buffers */
- emac_init_rings(fep->ndev);
-}
-
-static void emac_kick(struct ocp_enet_private *fep)
-{
- emac_t *emacp = fep->emacp;
- unsigned long emac_ier;
-
- emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP |
- EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE |
- EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
-
- out_be32(&emacp->em0iser, emac_ier);
-
- /* enable all MAL transmit and receive channels */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /* set transmit and receive enable */
- out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE);
-}
-
-static void
-emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep)
-{
- u32 advertise;
- int autoneg;
- int forced_speed;
- int forced_duplex;
-
- /* Default advertise */
- advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full;
- autoneg = fep->want_autoneg;
- forced_speed = fep->phy_mii.speed;
- forced_duplex = fep->phy_mii.duplex;
-
- /* Setup link parameters */
- if (ep) {
- if (ep->autoneg == AUTONEG_ENABLE) {
- advertise = ep->advertising;
- autoneg = 1;
- } else {
- autoneg = 0;
- forced_speed = ep->speed;
- forced_duplex = ep->duplex;
- }
- }
-
- /* Configure PHY & start aneg */
- fep->want_autoneg = autoneg;
- if (autoneg) {
- LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n",
- fep->ndev->name, advertise));
- fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise);
- } else {
- LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n",
- fep->ndev->name, forced_speed, forced_duplex));
- fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed,
- forced_duplex);
- }
- fep->timer_ticks = 0;
- mod_timer(&fep->link_timer, jiffies + HZ);
-}
-
-static void emac_link_timer(unsigned long data)
-{
- struct ocp_enet_private *fep = (struct ocp_enet_private *)data;
- int link;
-
- if (fep->going_away)
- return;
-
- spin_lock_irq(&fep->lock);
-
- link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii);
- LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link));
-
- if (link == netif_carrier_ok(fep->ndev)) {
- if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10)
- emac_start_link(fep, NULL);
- goto out;
- }
- printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name,
- link ? "Up" : "Down");
- if (link) {
- netif_carrier_on(fep->ndev);
- /* Chip needs a full reset on config change. That sucks, so I
- * should ultimately move that to some tasklet to limit
- * latency peaks caused by this code
- */
- emac_reset_configure(fep);
- if (fep->opened)
- emac_kick(fep);
- } else {
- fep->timer_ticks = 0;
- netif_carrier_off(fep->ndev);
- }
- out:
- mod_timer(&fep->link_timer, jiffies + HZ);
- spin_unlock_irq(&fep->lock);
-}
-
-static void emac_set_multicast_list(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
-
- spin_lock_irq(&fep->lock);
- __emac_set_multicast_list(dev);
- spin_unlock_irq(&fep->lock);
-}
-
-static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
-{
- struct ocp_enet_private *fep = ndev->priv;
-
- cmd->supported = fep->phy_mii.def->features;
+ cmd->supported = dev->phy.features;
cmd->port = PORT_MII;
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->phy_address = fep->mii_phy_addr;
- spin_lock_irq(&fep->lock);
- cmd->autoneg = fep->want_autoneg;
- cmd->speed = fep->phy_mii.speed;
- cmd->duplex = fep->phy_mii.duplex;
- spin_unlock_irq(&fep->lock);
+ cmd->phy_address = dev->phy.address;
+ cmd->transceiver =
+ dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL;
+
+ local_bh_disable();
+ cmd->advertising = dev->phy.advertising;
+ cmd->autoneg = dev->phy.autoneg;
+ cmd->speed = dev->phy.speed;
+ cmd->duplex = dev->phy.duplex;
+ local_bh_enable();
+
return 0;
}
-static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+static int emac_ethtool_set_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
{
- struct ocp_enet_private *fep = ndev->priv;
- unsigned long features = fep->phy_mii.def->features;
+ struct ocp_enet_private *dev = ndev->priv;
+ u32 f = dev->phy.features;
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
+ DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index,
+ cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
+ /* Basic sanity checks */
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
return -EINVAL;
if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
return -EINVAL;
- if (cmd->autoneg == AUTONEG_DISABLE)
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
switch (cmd->speed) {
case SPEED_10:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_10baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_10baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_10baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_10baseT_Full))
return -EINVAL;
break;
case SPEED_100:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_100baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_100baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_100baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_100baseT_Full))
return -EINVAL;
break;
case SPEED_1000:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_1000baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_1000baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_1000baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_1000baseT_Full))
return -EINVAL;
break;
default:
return -EINVAL;
- } else if ((features & SUPPORTED_Autoneg) == 0)
- return -EINVAL;
- spin_lock_irq(&fep->lock);
- emac_start_link(fep, cmd);
- spin_unlock_irq(&fep->lock);
+ }
+
+ local_bh_disable();
+ dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed,
+ cmd->duplex);
+
+ } else {
+ if (!(f & SUPPORTED_Autoneg))
+ return -EINVAL;
+
+ local_bh_disable();
+ dev->phy.def->ops->setup_aneg(&dev->phy,
+ (cmd->advertising & f) |
+ (dev->phy.advertising &
+ (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause)));
+ }
+ emac_force_link_update(dev);
+ local_bh_enable();
+
return 0;
}
-static void
-emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
+static void emac_ethtool_get_ringparam(struct net_device *ndev,
+ struct ethtool_ringparam *rp)
{
- struct ocp_enet_private *fep = ndev->priv;
+ rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF;
+ rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF;
+}
- strcpy(info->driver, DRV_NAME);
+static void emac_ethtool_get_pauseparam(struct net_device *ndev,
+ struct ethtool_pauseparam *pp)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ local_bh_disable();
+ if ((dev->phy.features & SUPPORTED_Autoneg) &&
+ (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause)))
+ pp->autoneg = 1;
+
+ if (dev->phy.duplex == DUPLEX_FULL) {
+ if (dev->phy.pause)
+ pp->rx_pause = pp->tx_pause = 1;
+ else if (dev->phy.asym_pause)
+ pp->tx_pause = 1;
+ }
+ local_bh_enable();
+}
+
+static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ return dev->tah_dev != 0;
+}
+
+static int emac_get_regs_len(struct ocp_enet_private *dev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE;
+}
+
+static int emac_ethtool_get_regs_len(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ return sizeof(struct emac_ethtool_regs_hdr) +
+ emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) +
+ zmii_get_regs_len(dev->zmii_dev) +
+ rgmii_get_regs_len(dev->rgmii_dev) +
+ tah_get_regs_len(dev->tah_dev);
+}
+
+static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf)
+{
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+
+ hdr->version = EMAC_ETHTOOL_REGS_VER;
+ hdr->index = dev->def->index;
+ memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE);
+ return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE);
+}
+
+static void emac_ethtool_get_regs(struct net_device *ndev,
+ struct ethtool_regs *regs, void *buf)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct emac_ethtool_regs_hdr *hdr = buf;
+
+ hdr->components = 0;
+ buf = hdr + 1;
+
+ local_irq_disable();
+ buf = mal_dump_regs(dev->mal, buf);
+ buf = emac_dump_regs(dev, buf);
+ if (dev->zmii_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_ZMII;
+ buf = zmii_dump_regs(dev->zmii_dev, buf);
+ }
+ if (dev->rgmii_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_RGMII;
+ buf = rgmii_dump_regs(dev->rgmii_dev, buf);
+ }
+ if (dev->tah_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_TAH;
+ buf = tah_dump_regs(dev->tah_dev, buf);
+ }
+ local_irq_enable();
+}
+
+static int emac_ethtool_nway_reset(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int res = 0;
+
+ DBG("%d: nway_reset" NL, dev->def->index);
+
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
+
+ local_bh_disable();
+ if (!dev->phy.autoneg) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising);
+ emac_force_link_update(dev);
+
+ out:
+ local_bh_enable();
+ return res;
+}
+
+static int emac_ethtool_get_stats_count(struct net_device *ndev)
+{
+ return EMAC_ETHTOOL_STATS_COUNT;
+}
+
+static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
+ u8 * buf)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys));
+}
+
+static void emac_ethtool_get_ethtool_stats(struct net_device *ndev,
+ struct ethtool_stats *estats,
+ u64 * tmp_stats)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ local_irq_disable();
+ memcpy(tmp_stats, &dev->stats, sizeof(dev->stats));
+ tmp_stats += sizeof(dev->stats) / sizeof(u64);
+ memcpy(tmp_stats, &dev->estats, sizeof(dev->estats));
+ local_irq_enable();
+}
+
+static void emac_ethtool_get_drvinfo(struct net_device *ndev,
+ struct ethtool_drvinfo *info)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ strcpy(info->driver, "ibm_emac");
strcpy(info->version, DRV_VERSION);
info->fw_version[0] = '\0';
- sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index);
- info->regdump_len = 0;
-}
-
-static int emac_nway_reset(struct net_device *ndev)
-{
- struct ocp_enet_private *fep = ndev->priv;
-
- if (!fep->want_autoneg)
- return -EINVAL;
- spin_lock_irq(&fep->lock);
- emac_start_link(fep, NULL);
- spin_unlock_irq(&fep->lock);
- return 0;
-}
-
-static u32 emac_get_link(struct net_device *ndev)
-{
- return netif_carrier_ok(ndev);
+ sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index);
+ info->n_stats = emac_ethtool_get_stats_count(ndev);
+ info->regdump_len = emac_ethtool_get_regs_len(ndev);
}
static struct ethtool_ops emac_ethtool_ops = {
- .get_settings = emac_get_settings,
- .set_settings = emac_set_settings,
- .get_drvinfo = emac_get_drvinfo,
- .nway_reset = emac_nway_reset,
- .get_link = emac_get_link
+ .get_settings = emac_ethtool_get_settings,
+ .set_settings = emac_ethtool_set_settings,
+ .get_drvinfo = emac_ethtool_get_drvinfo,
+
+ .get_regs_len = emac_ethtool_get_regs_len,
+ .get_regs = emac_ethtool_get_regs,
+
+ .nway_reset = emac_ethtool_nway_reset,
+
+ .get_ringparam = emac_ethtool_get_ringparam,
+ .get_pauseparam = emac_ethtool_get_pauseparam,
+
+ .get_rx_csum = emac_ethtool_get_rx_csum,
+
+ .get_strings = emac_ethtool_get_strings,
+ .get_stats_count = emac_ethtool_get_stats_count,
+ .get_ethtool_stats = emac_ethtool_get_ethtool_stats,
+
+ .get_link = ethtool_op_get_link,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .get_sg = ethtool_op_get_sg,
};
-static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
- struct ocp_enet_private *fep = dev->priv;
+ struct ocp_enet_private *dev = ndev->priv;
uint16_t *data = (uint16_t *) & rq->ifr_ifru;
+ DBG("%d: ioctl %08x" NL, dev->def->index, cmd);
+
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
+
switch (cmd) {
case SIOCGMIIPHY:
- data[0] = fep->mii_phy_addr;
+ case SIOCDEVPRIVATE:
+ data[0] = dev->phy.address;
/* Fall through */
case SIOCGMIIREG:
- data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]);
+ case SIOCDEVPRIVATE + 1:
+ data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
return 0;
+
case SIOCSMIIREG:
+ case SIOCDEVPRIVATE + 2:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
-
- emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]);
+ emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
return 0;
default:
return -EOPNOTSUPP;
}
}
-static int emac_open(struct net_device *dev)
+static int __init emac_probe(struct ocp_device *ocpdev)
{
- struct ocp_enet_private *fep = dev->priv;
- int rc;
-
- spin_lock_irq(&fep->lock);
-
- fep->opened = 1;
- netif_carrier_off(dev);
-
- /* Reset & configure the chip */
- emac_reset_configure(fep);
-
- spin_unlock_irq(&fep->lock);
-
- /* Request our interrupt lines */
- rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev);
- if (rc != 0) {
- printk("dev->irq %d failed\n", dev->irq);
- goto bail;
- }
- /* Kick the chip rx & tx channels into life */
- spin_lock_irq(&fep->lock);
- emac_kick(fep);
- spin_unlock_irq(&fep->lock);
-
- netif_start_queue(dev);
- bail:
- return rc;
-}
-
-static int emac_close(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- /* XXX Stop IRQ emitting here */
- spin_lock_irq(&fep->lock);
- fep->opened = 0;
- mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- netif_carrier_off(dev);
- netif_stop_queue(dev);
-
- /*
- * Check for a link, some PHYs don't provide a clock if
- * no link is present. Some EMACs will not come out of
- * soft reset without a PHY clock present.
- */
- if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
- out_be32(&emacp->em0mr0, EMAC_M0_SRST);
- udelay(10);
-
- if (emacp->em0mr0 & EMAC_M0_SRST) {
- /*not sure what to do here hopefully it clears before another open */
- printk(KERN_ERR
- "%s: Phy SoftReset didn't clear, no link?\n",
- dev->name);
- }
- }
-
- /* Free the irq's */
- free_irq(dev->irq, dev);
-
- spin_unlock_irq(&fep->lock);
-
- return 0;
-}
-
-static void emac_remove(struct ocp_device *ocpdev)
-{
- struct net_device *dev = ocp_get_drvdata(ocpdev);
- struct ocp_enet_private *ep = dev->priv;
-
- /* FIXME: locking, races, ... */
- ep->going_away = 1;
- ocp_set_drvdata(ocpdev, NULL);
- if (ep->rgmii_dev)
- emac_close_rgmii(ep->rgmii_dev);
- if (ep->zmii_dev)
- emac_close_zmii(ep->zmii_dev);
-
- unregister_netdev(dev);
- del_timer_sync(&ep->link_timer);
- mal_unregister_commac(ep->mal, &ep->commac);
- iounmap((void *)ep->emacp);
- kfree(dev);
-}
-
-struct mal_commac_ops emac_commac_ops = {
- .txeob = &emac_txeob_dev,
- .txde = &emac_txde_dev,
- .rxeob = &emac_rxeob_dev,
- .rxde = &emac_rxde_dev,
-};
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void emac_netpoll(struct net_device *ndev)
-{
- emac_rxeob_dev((void *)ndev, 0);
- emac_txeob_dev((void *)ndev, 0);
-}
-#endif
-
-static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
-{
- int deferred_init = 0;
- int rc = 0, i;
+ struct ocp_func_emac_data *emacdata = ocpdev->def->additions;
struct net_device *ndev;
- struct ocp_enet_private *ep;
- struct ocp_func_emac_data *emacdata;
- int commac_reg = 0;
- u32 phy_map;
+ struct ocp_device *maldev;
+ struct ocp_enet_private *dev;
+ int err, i;
- emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
+ DBG("%d: probe" NL, ocpdev->def->index);
+
if (!emacdata) {
printk(KERN_ERR "emac%d: Missing additional data!\n",
ocpdev->def->index);
@@ -1738,304 +1936,312 @@
/* Allocate our net_device structure */
ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
- if (ndev == NULL) {
- printk(KERN_ERR
- "emac%d: Could not allocate ethernet device.\n",
+ if (!ndev) {
+ printk(KERN_ERR "emac%d: could not allocate ethernet device!\n",
ocpdev->def->index);
return -ENOMEM;
}
- ep = ndev->priv;
- ep->ndev = ndev;
- ep->ocpdev = ocpdev;
- ndev->irq = ocpdev->def->irq;
- ep->wol_irq = emacdata->wol_irq;
- if (emacdata->mdio_idx >= 0) {
- if (emacdata->mdio_idx == ocpdev->def->index) {
- /* Set the common MDIO net_device */
- mdio_ndev = ndev;
- deferred_init = 1;
+ dev = ndev->priv;
+ dev->ndev = ndev;
+ dev->ldev = &ocpdev->dev;
+ dev->def = ocpdev->def;
+ SET_MODULE_OWNER(ndev);
+
+ /* Find MAL device we are connected to */
+ maldev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx);
+ if (!maldev) {
+ printk(KERN_ERR "emac%d: unknown mal%d device!\n",
+ dev->def->index, emacdata->mal_idx);
+ err = -ENODEV;
+ goto out;
+ }
+ dev->mal = ocp_get_drvdata(maldev);
+ if (!dev->mal) {
+ printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n",
+ dev->def->index, emacdata->mal_idx);
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* Register with MAL */
+ dev->commac.ops = &emac_commac_ops;
+ dev->commac.dev = dev;
+ dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan);
+ dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan);
+ err = mal_register_commac(dev->mal, &dev->commac);
+ if (err) {
+ printk(KERN_ERR "emac%d: failed to register with mal%d!\n",
+ dev->def->index, emacdata->mal_idx);
+ goto out;
+ }
+ dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
+ dev->rx_sync_size = emac_rx_sync_size(ndev->mtu);
+
+ /* Get pointers to BD rings */
+ dev->tx_desc =
+ dev->mal->bd_virt + mal_tx_bd_offset(dev->mal,
+ emacdata->mal_tx_chan);
+ dev->rx_desc =
+ dev->mal->bd_virt + mal_rx_bd_offset(dev->mal,
+ emacdata->mal_rx_chan);
+
+ DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc);
+ DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc);
+
+ /* Clean rings */
+ memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
+ memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
+
+ /* If we depend on another EMAC for MDIO, check whether it was probed already */
+ if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) {
+ struct ocp_device *mdiodev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC,
+ emacdata->mdio_idx);
+ if (!mdiodev) {
+ printk(KERN_ERR "emac%d: unknown emac%d device!\n",
+ dev->def->index, emacdata->mdio_idx);
+ err = -ENODEV;
+ goto out2;
}
- ep->mdio_dev = mdio_ndev;
- } else {
- ep->mdio_dev = ndev;
- }
-
- ocp_set_drvdata(ocpdev, ndev);
-
- spin_lock_init(&ep->lock);
-
- /* Fill out MAL informations and register commac */
- ep->mal = mal;
- ep->mal_tx_chan = emacdata->mal_tx_chan;
- ep->mal_rx_chan = emacdata->mal_rx_chan;
- ep->commac.ops = &emac_commac_ops;
- ep->commac.dev = ndev;
- ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan);
- ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan);
- rc = mal_register_commac(ep->mal, &ep->commac);
- if (rc != 0)
- goto bail;
- commac_reg = 1;
-
- /* Map our MMIOs */
- ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t));
-
- /* Check if we need to attach to a ZMII */
- if (emacdata->zmii_idx >= 0) {
- ep->zmii_input = emacdata->zmii_mux;
- ep->zmii_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII,
- emacdata->zmii_idx);
- if (ep->zmii_dev == NULL)
- printk(KERN_WARNING
- "emac%d: ZMII %d requested but not found !\n",
- ocpdev->def->index, emacdata->zmii_idx);
- else if ((rc =
- emac_init_zmii(ep->zmii_dev, ep->zmii_input,
- emacdata->phy_mode)) != 0)
- goto bail;
- }
-
- /* Check if we need to attach to a RGMII */
- if (emacdata->rgmii_idx >= 0) {
- ep->rgmii_input = emacdata->rgmii_mux;
- ep->rgmii_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII,
- emacdata->rgmii_idx);
- if (ep->rgmii_dev == NULL)
- printk(KERN_WARNING
- "emac%d: RGMII %d requested but not found !\n",
- ocpdev->def->index, emacdata->rgmii_idx);
- else if ((rc =
- emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input,
- emacdata->phy_mode)) != 0)
- goto bail;
- }
-
- /* Check if we need to attach to a TAH */
- if (emacdata->tah_idx >= 0) {
- ep->tah_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
- emacdata->tah_idx);
- if (ep->tah_dev == NULL)
- printk(KERN_WARNING
- "emac%d: TAH %d requested but not found !\n",
- ocpdev->def->index, emacdata->tah_idx);
- else if ((rc = emac_init_tah(ep)) != 0)
- goto bail;
- }
-
- if (deferred_init) {
- if (!list_empty(&emac_init_list)) {
- struct list_head *entry;
- struct emac_def_dev *ddev;
-
- list_for_each(entry, &emac_init_list) {
- ddev =
- list_entry(entry, struct emac_def_dev,
- link);
- emac_init_device(ddev->ocpdev, ddev->mal);
- }
+ dev->mdio_dev = ocp_get_drvdata(mdiodev);
+ if (!dev->mdio_dev) {
+ printk(KERN_ERR
+ "emac%d: emac%d hasn't been initialized yet!\n",
+ dev->def->index, emacdata->mdio_idx);
+ err = -ENODEV;
+ goto out2;
}
}
- /* Init link monitoring timer */
- init_timer(&ep->link_timer);
- ep->link_timer.function = emac_link_timer;
- ep->link_timer.data = (unsigned long)ep;
- ep->timer_ticks = 0;
+ /* Attach to ZMII, if needed */
+ if ((err = zmii_attach(dev)) != 0)
+ goto out2;
- /* Fill up the mii_phy structure */
- ep->phy_mii.dev = ndev;
- ep->phy_mii.mdio_read = emac_phy_read;
- ep->phy_mii.mdio_write = emac_phy_write;
- ep->phy_mii.mode = emacdata->phy_mode;
+ /* Attach to RGMII, if needed */
+ if ((err = rgmii_attach(dev)) != 0)
+ goto out3;
- /* Find PHY */
- phy_map = emacdata->phy_map | busy_phy_map;
- for (i = 0; i <= 0x1f; i++, phy_map >>= 1) {
- if ((phy_map & 0x1) == 0) {
- int val = emac_phy_read(ndev, i, MII_BMCR);
- if (val != 0xffff && val != -1)
- break;
- }
- }
- if (i == 0x20) {
- printk(KERN_WARNING "emac%d: Can't find PHY.\n",
- ocpdev->def->index);
- rc = -ENODEV;
- goto bail;
- }
- busy_phy_map |= 1 << i;
- ep->mii_phy_addr = i;
- rc = mii_phy_probe(&ep->phy_mii, i);
- if (rc) {
- printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n",
- ocpdev->def->index);
- rc = -ENODEV;
- goto bail;
- }
-
- /* Disable any PHY features not supported by the platform */
- ep->phy_mii.def->features &= ~emacdata->phy_feat_exc;
+ /* Attach to TAH, if needed */
+ if ((err = tah_attach(dev)) != 0)
+ goto out4;
- /* Setup initial PHY config & startup aneg */
- if (ep->phy_mii.def->ops->init)
- ep->phy_mii.def->ops->init(&ep->phy_mii);
- netif_carrier_off(ndev);
- if (ep->phy_mii.def->features & SUPPORTED_Autoneg)
- ep->want_autoneg = 1;
- else {
- ep->want_autoneg = 0;
-
- /* Select highest supported speed/duplex */
- if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) {
- ep->phy_mii.speed = SPEED_1000;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_1000baseT_Half) {
- ep->phy_mii.speed = SPEED_1000;
- ep->phy_mii.duplex = DUPLEX_HALF;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_100baseT_Full) {
- ep->phy_mii.speed = SPEED_100;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_100baseT_Half) {
- ep->phy_mii.speed = SPEED_100;
- ep->phy_mii.duplex = DUPLEX_HALF;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_10baseT_Full) {
- ep->phy_mii.speed = SPEED_10;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else {
- ep->phy_mii.speed = SPEED_10;
- ep->phy_mii.duplex = DUPLEX_HALF;
- }
+ /* Map EMAC regs */
+ dev->emacp =
+ (struct emac_regs *)ioremap(dev->def->paddr,
+ sizeof(struct emac_regs));
+ if (!dev->emacp) {
+ printk(KERN_ERR "emac%d: could not ioremap device registers!\n",
+ dev->def->index);
+ err = -ENOMEM;
+ goto out5;
}
- emac_start_link(ep, NULL);
- /* read the MAC Address */
- for (i = 0; i < 6; i++)
+ /* Fill in MAC address */
+ for (i = 0; i < 6; ++i)
ndev->dev_addr[i] = emacdata->mac_addr[i];
+ /* Set some link defaults before we can find out real parameters */
+ dev->phy.speed = SPEED_100;
+ dev->phy.duplex = DUPLEX_FULL;
+ dev->phy.autoneg = AUTONEG_DISABLE;
+ dev->phy.pause = dev->phy.asym_pause = 0;
+ init_timer(&dev->link_timer);
+ dev->link_timer.function = emac_link_timer;
+ dev->link_timer.data = (unsigned long)dev;
+
+ /* Find PHY if any */
+ dev->phy.dev = ndev;
+ dev->phy.mode = emacdata->phy_mode;
+ if (emacdata->phy_map != 0xffffffff) {
+ u32 phy_map = emacdata->phy_map | busy_phy_map;
+ u32 adv;
+
+ DBG("%d: PHY maps %08x %08x" NL, dev->def->index,
+ emacdata->phy_map, busy_phy_map);
+
+ EMAC_RX_CLK_TX(dev->def->index);
+
+ dev->phy.mdio_read = emac_mdio_read;
+ dev->phy.mdio_write = emac_mdio_write;
+
+ /* Configure EMAC with defaults so we can at least use MDIO
+ * This is needed mostly for 440GX
+ */
+ if (emac_phy_gpcs(dev->phy.mode)) {
+ /* XXX
+ * Make GPCS PHY address equal to EMAC index.
+ * We probably should take into account busy_phy_map
+ * and/or phy_map here.
+ */
+ dev->phy.address = dev->def->index;
+ }
+
+ emac_configure(dev);
+
+ for (i = 0; i < 0x20; phy_map >>= 1, ++i)
+ if (!(phy_map & 1)) {
+ int r;
+ busy_phy_map |= 1 << i;
+
+ /* Quick check if there is a PHY at the address */
+ r = emac_mdio_read(dev->ndev, i, MII_BMCR);
+ if (r == 0xffff || r < 0)
+ continue;
+ if (!mii_phy_probe(&dev->phy, i))
+ break;
+ }
+ if (i == 0x20) {
+ printk(KERN_WARNING "emac%d: can't find PHY!\n",
+ dev->def->index);
+ goto out6;
+ }
+
+ /* Init PHY */
+ if (dev->phy.def->ops->init)
+ dev->phy.def->ops->init(&dev->phy);
+
+ /* Disable any PHY features not supported by the platform */
+ dev->phy.def->features &= ~emacdata->phy_feat_exc;
+
+ /* Setup initial link parameters */
+ if (dev->phy.features & SUPPORTED_Autoneg) {
+ adv = dev->phy.features;
+#if !defined(CONFIG_40x)
+ adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+#endif
+ /* Restart autonegotiation */
+ dev->phy.def->ops->setup_aneg(&dev->phy, adv);
+ } else {
+ u32 f = dev->phy.def->features;
+ int speed = SPEED_10, fd = DUPLEX_HALF;
+
+ /* Select highest supported speed/duplex */
+ if (f & SUPPORTED_1000baseT_Full) {
+ speed = SPEED_1000;
+ fd = DUPLEX_FULL;
+ } else if (f & SUPPORTED_1000baseT_Half)
+ speed = SPEED_1000;
+ else if (f & SUPPORTED_100baseT_Full) {
+ speed = SPEED_100;
+ fd = DUPLEX_FULL;
+ } else if (f & SUPPORTED_100baseT_Half)
+ speed = SPEED_100;
+ else if (f & SUPPORTED_10baseT_Full)
+ fd = DUPLEX_FULL;
+
+ /* Force link parameters */
+ dev->phy.def->ops->setup_forced(&dev->phy, speed, fd);
+ }
+ } else {
+ emac_reset(dev);
+
+ /* PHY-less configuration.
+ * XXX I probably should move these settings to emacdata
+ */
+ dev->phy.address = -1;
+ dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
+ dev->phy.pause = 1;
+ }
+
/* Fill in the driver function table */
ndev->open = &emac_open;
- ndev->hard_start_xmit = &emac_start_xmit;
+ if (dev->tah_dev) {
+ ndev->hard_start_xmit = &emac_start_xmit_sg;
+ ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ } else
+ ndev->hard_start_xmit = &emac_start_xmit;
+ ndev->tx_timeout = &emac_full_tx_reset;
+ ndev->watchdog_timeo = 5 * HZ;
ndev->stop = &emac_close;
ndev->get_stats = &emac_stats;
- if (emacdata->jumbo)
- ndev->change_mtu = &emac_change_mtu;
- ndev->set_mac_address = &emac_set_mac_address;
ndev->set_multicast_list = &emac_set_multicast_list;
ndev->do_ioctl = &emac_ioctl;
+ if (emac_phy_supports_gige(emacdata->phy_mode)) {
+ ndev->change_mtu = &emac_change_mtu;
+ dev->commac.ops = &emac_commac_sg_ops;
+ }
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
- if (emacdata->tah_idx >= 0)
- ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- ndev->poll_controller = emac_netpoll;
-#endif
- SET_MODULE_OWNER(ndev);
+ netif_carrier_off(ndev);
+ netif_stop_queue(ndev);
- rc = register_netdev(ndev);
- if (rc != 0)
- goto bail;
+ err = register_netdev(ndev);
+ if (err) {
+ printk(KERN_ERR "emac%d: failed to register net device (%d)!\n",
+ dev->def->index, err);
+ goto out6;
+ }
- printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- ndev->name,
+ ocp_set_drvdata(ocpdev, dev);
+
+ printk("%s: emac%d, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ ndev->name, dev->def->index,
ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
- printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n",
- ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr);
- bail:
- if (rc && commac_reg)
- mal_unregister_commac(ep->mal, &ep->commac);
- if (rc && ndev)
- kfree(ndev);
+ if (dev->phy.address >= 0)
+ printk("%s: found %s PHY (0x%02x)\n", ndev->name,
+ dev->phy.def->name, dev->phy.address);
- return rc;
-}
-
-static int emac_probe(struct ocp_device *ocpdev)
-{
- struct ocp_device *maldev;
- struct ibm_ocp_mal *mal;
- struct ocp_func_emac_data *emacdata;
-
- emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
- if (emacdata == NULL) {
- printk(KERN_ERR "emac%d: Missing additional datas !\n",
- ocpdev->def->index);
- return -ENODEV;
- }
-
- /* Get the MAL device */
- maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx);
- if (maldev == NULL) {
- printk("No maldev\n");
- return -ENODEV;
- }
- /*
- * Get MAL driver data, it must be here due to link order.
- * When the driver is modularized, symbol dependencies will
- * ensure the MAL driver is already present if built as a
- * module.
- */
- mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev);
- if (mal == NULL) {
- printk("No maldrv\n");
- return -ENODEV;
- }
-
- /* If we depend on another EMAC for MDIO, wait for it to show up */
- if (emacdata->mdio_idx >= 0 &&
- (emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) {
- struct emac_def_dev *ddev;
- /* Add this index to the deferred init table */
- ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL);
- ddev->ocpdev = ocpdev;
- ddev->mal = mal;
- list_add_tail(&ddev->link, &emac_init_list);
- } else {
- emac_init_device(ocpdev, mal);
- }
+ emac_dbg_register(dev->def->index, dev);
return 0;
+ out6:
+ iounmap((void *)dev->emacp);
+ out5:
+ tah_fini(dev->tah_dev);
+ out4:
+ rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
+ out3:
+ zmii_fini(dev->zmii_dev, dev->zmii_input);
+ out2:
+ mal_unregister_commac(dev->mal, &dev->commac);
+ out:
+ kfree(ndev);
+ return err;
}
-/* Structure for a device driver */
static struct ocp_device_id emac_ids[] = {
- {.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC},
- {.vendor = OCP_VENDOR_INVALID}
+ { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC },
+ { .vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver emac_driver = {
.name = "emac",
.id_table = emac_ids,
-
.probe = emac_probe,
.remove = emac_remove,
};
static int __init emac_init(void)
{
- printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n");
- printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n");
+ printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
- if (skb_res > 2) {
- printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n",
- skb_res);
- skb_res = 2;
+ DBG(": init" NL);
+
+ if (mal_init())
+ return -ENODEV;
+
+ EMAC_CLK_INTERNAL;
+ if (ocp_register_driver(&emac_driver)) {
+ EMAC_CLK_EXTERNAL;
+ ocp_unregister_driver(&emac_driver);
+ mal_exit();
+ return -ENODEV;
}
+ EMAC_CLK_EXTERNAL;
- return ocp_register_driver(&emac_driver);
+ emac_init_debug();
+ return 0;
}
static void __exit emac_exit(void)
{
+ DBG(": exit" NL);
ocp_unregister_driver(&emac_driver);
+ mal_exit();
+ emac_fini_debug();
}
module_init(emac_init);
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h
index 97e6e1e..e9b44d0 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.h
+++ b/drivers/net/ibm_emac/ibm_emac_core.h
@@ -1,146 +1,221 @@
/*
- * ibm_emac_core.h
+ * drivers/net/ibm_emac/ibm_emac_core.h
*
- * Ethernet driver for the built in ethernet on the IBM 405 PowerPC
- * processor.
+ * Driver for PowerPC 4xx on-chip ethernet controller.
*
- * Armin Kuster akuster@mvista.com
- * Sept, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Orignial driver
- * Johnnie Peters
- * jpeters@mvista.com
- *
- * Copyright 2000 MontaVista Softare Inc.
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Johnnie Peters <jpeters@mvista.com>
+ * Copyright 2000, 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
+#ifndef __IBM_EMAC_CORE_H_
+#define __IBM_EMAC_CORE_H_
-#ifndef _IBM_EMAC_CORE_H_
-#define _IBM_EMAC_CORE_H_
-
+#include <linux/config.h>
#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
#include <asm/ocp.h>
-#include <asm/mmu.h> /* For phys_addr_t */
#include "ibm_emac.h"
#include "ibm_emac_phy.h"
-#include "ibm_emac_rgmii.h"
#include "ibm_emac_zmii.h"
+#include "ibm_emac_rgmii.h"
#include "ibm_emac_mal.h"
#include "ibm_emac_tah.h"
-#ifndef CONFIG_IBM_EMAC_TXB
-#define NUM_TX_BUFF 64
-#define NUM_RX_BUFF 64
-#else
-#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
-#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
+#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
+#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
+
+/* Simple sanity check */
+#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
+#error Invalid number of buffer descriptors (greater than 256)
#endif
-/* This does 16 byte alignment, exactly what we need.
- * The packet length includes FCS, but we don't want to
- * include that when passing upstream as it messes up
- * bridging applications.
+// XXX
+#define EMAC_MIN_MTU 46
+#define EMAC_MAX_MTU 9000
+
+/* Maximum L2 header length (VLAN tagged, no FCS) */
+#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4)
+
+/* RX BD size for the given MTU */
+static inline int emac_rx_size(int mtu)
+{
+ if (mtu > ETH_DATA_LEN)
+ return MAL_MAX_RX_SIZE;
+ else
+ return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
+}
+
+#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment())
+
+#define EMAC_RX_SKB_HEADROOM \
+ EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
+
+/* Size of RX skb for the given MTU */
+static inline int emac_rx_skb_size(int mtu)
+{
+ int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
+ return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
+}
+
+/* RX DMA sync size */
+static inline int emac_rx_sync_size(int mtu)
+{
+ return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
+}
+
+/* Driver statistcs is split into two parts to make it more cache friendly:
+ * - normal statistics (packet count, etc)
+ * - error statistics
+ *
+ * When statistics is requested by ethtool, these parts are concatenated,
+ * normal one goes first.
+ *
+ * Please, keep these structures in sync with emac_stats_keys.
*/
-#ifndef CONFIG_IBM_EMAC_SKBRES
-#define SKB_RES 2
-#else
-#define SKB_RES CONFIG_IBM_EMAC_SKBRES
-#endif
-/* Note about alignement. alloc_skb() returns a cache line
- * aligned buffer. However, dev_alloc_skb() will add 16 more
- * bytes and "reserve" them, so our buffer will actually end
- * on a half cache line. What we do is to use directly
- * alloc_skb, allocate 16 more bytes to match the total amount
- * allocated by dev_alloc_skb(), but we don't reserve.
- */
-#define MAX_NUM_BUF_DESC 255
-#define DESC_BUF_SIZE 4080 /* max 4096-16 */
-#define DESC_BUF_SIZE_REG (DESC_BUF_SIZE / 16)
+/* Normal TX/RX Statistics */
+struct ibm_emac_stats {
+ u64 rx_packets;
+ u64 rx_bytes;
+ u64 tx_packets;
+ u64 tx_bytes;
+ u64 rx_packets_csum;
+ u64 tx_packets_csum;
+};
-/* Transmitter timeout. */
-#define TX_TIMEOUT (2*HZ)
+/* Error statistics */
+struct ibm_emac_error_stats {
+ u64 tx_undo;
-/* MDIO latency delay */
-#define MDIO_DELAY 250
+ /* Software RX Errors */
+ u64 rx_dropped_stack;
+ u64 rx_dropped_oom;
+ u64 rx_dropped_error;
+ u64 rx_dropped_resize;
+ u64 rx_dropped_mtu;
+ u64 rx_stopped;
+ /* BD reported RX errors */
+ u64 rx_bd_errors;
+ u64 rx_bd_overrun;
+ u64 rx_bd_bad_packet;
+ u64 rx_bd_runt_packet;
+ u64 rx_bd_short_event;
+ u64 rx_bd_alignment_error;
+ u64 rx_bd_bad_fcs;
+ u64 rx_bd_packet_too_long;
+ u64 rx_bd_out_of_range;
+ u64 rx_bd_in_range;
+ /* EMAC IRQ reported RX errors */
+ u64 rx_parity;
+ u64 rx_fifo_overrun;
+ u64 rx_overrun;
+ u64 rx_bad_packet;
+ u64 rx_runt_packet;
+ u64 rx_short_event;
+ u64 rx_alignment_error;
+ u64 rx_bad_fcs;
+ u64 rx_packet_too_long;
+ u64 rx_out_of_range;
+ u64 rx_in_range;
-/* Power managment shift registers */
-#define IBM_CPM_EMMII 0 /* Shift value for MII */
-#define IBM_CPM_EMRX 1 /* Shift value for recv */
-#define IBM_CPM_EMTX 2 /* Shift value for MAC */
-#define IBM_CPM_EMAC(x) (((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX))
+ /* Software TX Errors */
+ u64 tx_dropped;
+ /* BD reported TX errors */
+ u64 tx_bd_errors;
+ u64 tx_bd_bad_fcs;
+ u64 tx_bd_carrier_loss;
+ u64 tx_bd_excessive_deferral;
+ u64 tx_bd_excessive_collisions;
+ u64 tx_bd_late_collision;
+ u64 tx_bd_multple_collisions;
+ u64 tx_bd_single_collision;
+ u64 tx_bd_underrun;
+ u64 tx_bd_sqe;
+ /* EMAC IRQ reported TX errors */
+ u64 tx_parity;
+ u64 tx_underrun;
+ u64 tx_sqe;
+ u64 tx_errors;
+};
-#define ENET_HEADER_SIZE 14
-#define ENET_FCS_SIZE 4
-#define ENET_DEF_MTU_SIZE 1500
-#define ENET_DEF_BUF_SIZE (ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE)
-#define EMAC_MIN_FRAME 64
-#define EMAC_MAX_FRAME 9018
-#define EMAC_MIN_MTU (EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-#define EMAC_MAX_MTU (EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-
-#ifdef CONFIG_IBM_EMAC_ERRMSG
-void emac_serr_dump_0(struct net_device *dev);
-void emac_serr_dump_1(struct net_device *dev);
-void emac_err_dump(struct net_device *dev, int em0isr);
-void emac_phy_dump(struct net_device *);
-void emac_desc_dump(struct net_device *);
-void emac_mac_dump(struct net_device *);
-void emac_mal_dump(struct net_device *);
-#else
-#define emac_serr_dump_0(dev) do { } while (0)
-#define emac_serr_dump_1(dev) do { } while (0)
-#define emac_err_dump(dev,x) do { } while (0)
-#define emac_phy_dump(dev) do { } while (0)
-#define emac_desc_dump(dev) do { } while (0)
-#define emac_mac_dump(dev) do { } while (0)
-#define emac_mal_dump(dev) do { } while (0)
-#endif
+#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \
+ sizeof(struct ibm_emac_error_stats)) \
+ / sizeof(u64))
struct ocp_enet_private {
- struct sk_buff *tx_skb[NUM_TX_BUFF];
- struct sk_buff *rx_skb[NUM_RX_BUFF];
- struct mal_descriptor *tx_desc;
- struct mal_descriptor *rx_desc;
- struct mal_descriptor *rx_dirty;
- struct net_device_stats stats;
- int tx_cnt;
- int rx_slot;
- int dirty_rx;
- int tx_slot;
- int ack_slot;
- int rx_buffer_size;
+ struct net_device *ndev; /* 0 */
+ struct emac_regs *emacp;
+
+ struct mal_descriptor *tx_desc;
+ int tx_cnt;
+ int tx_slot;
+ int ack_slot;
- struct mii_phy phy_mii;
- int mii_phy_addr;
- int want_autoneg;
- int timer_ticks;
- struct timer_list link_timer;
- struct net_device *mdio_dev;
+ struct mal_descriptor *rx_desc;
+ int rx_slot;
+ struct sk_buff *rx_sg_skb; /* 1 */
+ int rx_skb_size;
+ int rx_sync_size;
- struct ocp_device *rgmii_dev;
- int rgmii_input;
+ struct ibm_emac_stats stats;
+ struct ocp_device *tah_dev;
- struct ocp_device *zmii_dev;
- int zmii_input;
+ struct ibm_ocp_mal *mal;
+ struct mal_commac commac;
- struct ibm_ocp_mal *mal;
- int mal_tx_chan, mal_rx_chan;
- struct mal_commac commac;
+ struct sk_buff *tx_skb[NUM_TX_BUFF];
+ struct sk_buff *rx_skb[NUM_RX_BUFF];
- struct ocp_device *tah_dev;
+ struct ocp_device *zmii_dev;
+ int zmii_input;
+ struct ocp_enet_private *mdio_dev;
+ struct ocp_device *rgmii_dev;
+ int rgmii_input;
- int opened;
- int going_away;
- int wol_irq;
- emac_t *emacp;
- struct ocp_device *ocpdev;
- struct net_device *ndev;
- spinlock_t lock;
+ struct ocp_def *def;
+
+ struct mii_phy phy;
+ struct timer_list link_timer;
+ int reset_failed;
+
+ struct ibm_emac_error_stats estats;
+ struct net_device_stats nstats;
+
+ struct device* ldev;
};
-#endif /* _IBM_EMAC_CORE_H_ */
+
+/* Ethtool get_regs complex data.
+ * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
+ * when available.
+ *
+ * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
+ * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
+ * Each register component is preceded with emac_ethtool_regs_subhdr.
+ * Order of the optional headers follows their relative bit posititions
+ * in emac_ethtool_regs_hdr.components
+ */
+#define EMAC_ETHTOOL_REGS_ZMII 0x00000001
+#define EMAC_ETHTOOL_REGS_RGMII 0x00000002
+#define EMAC_ETHTOOL_REGS_TAH 0x00000004
+
+struct emac_ethtool_regs_hdr {
+ u32 components;
+};
+
+struct emac_ethtool_regs_subhdr {
+ u32 version;
+ u32 index;
+};
+
+#endif /* __IBM_EMAC_CORE_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c
index c851204..75d3b86 100644
--- a/drivers/net/ibm_emac/ibm_emac_debug.c
+++ b/drivers/net/ibm_emac/ibm_emac_debug.c
@@ -1,224 +1,213 @@
/*
- * ibm_ocp_debug.c
+ * drivers/net/ibm_emac/ibm_emac_debug.c
*
- * This has all the debug routines that where in *_enet.c
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
- * Armin Kuster akuster@mvista.com
- * April , 2002
- *
- * Copyright 2002 MontaVista Softare Inc.
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/sysrq.h>
#include <asm/io.h>
-#include "ibm_ocp_mal.h"
-#include "ibm_ocp_zmii.h"
-#include "ibm_ocp_enet.h"
-extern int emac_phy_read(struct net_device *dev, int mii_id, int reg);
+#include "ibm_emac_core.h"
-void emac_phy_dump(struct net_device *dev)
+static void emac_desc_dump(int idx, struct ocp_enet_private *p)
{
- struct ocp_enet_private *fep = dev->priv;
- unsigned long i;
- uint data;
+ int i;
+ printk("** EMAC%d TX BDs **\n"
+ " tx_cnt = %d tx_slot = %d ack_slot = %d\n",
+ idx, p->tx_cnt, p->tx_slot, p->ack_slot);
+ for (i = 0; i < NUM_TX_BUFF / 2; ++i)
+ printk
+ ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
+ i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ',
+ p->tx_desc[i].ctrl, p->tx_desc[i].data_len,
+ NUM_TX_BUFF / 2 + i,
+ p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr,
+ p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ',
+ p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl,
+ p->tx_desc[NUM_TX_BUFF / 2 + i].data_len);
- printk(KERN_DEBUG " Prepare for Phy dump....\n");
- for (i = 0; i < 0x1A; i++) {
- data = emac_phy_read(dev, fep->mii_phy_addr, i);
- printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data);
- if (i == 0x07)
- i = 0x0f;
+ printk("** EMAC%d RX BDs **\n"
+ " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n"
+ " rx_sg_skb = 0x%p\n",
+ idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size,
+ p->rx_sync_size, p->rx_sg_skb);
+ for (i = 0; i < NUM_RX_BUFF / 2; ++i)
+ printk
+ ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
+ i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ',
+ p->rx_desc[i].ctrl, p->rx_desc[i].data_len,
+ NUM_RX_BUFF / 2 + i,
+ p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr,
+ p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ',
+ p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl,
+ p->rx_desc[NUM_RX_BUFF / 2 + i].data_len);
+}
+
+static void emac_mac_dump(int idx, struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+
+ printk("** EMAC%d registers **\n"
+ "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
+ "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n"
+ "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n"
+ "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x "
+ "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "LSA = %04x%08x IPGVR = 0x%04x\n"
+ "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n"
+ "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n",
+ idx, in_be32(&p->mr0), in_be32(&p->mr1),
+ in_be32(&p->tmr0), in_be32(&p->tmr1),
+ in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser),
+ in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid),
+ in_be32(&p->vtci),
+ in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3),
+ in_be32(&p->iaht4),
+ in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3),
+ in_be32(&p->gaht4),
+ in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr),
+ in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr),
+ in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr)
+ );
+
+ emac_desc_dump(idx, dev);
+}
+
+static void emac_mal_dump(struct ibm_ocp_mal *mal)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ int i;
+
+ printk("** MAL%d Registers **\n"
+ "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n"
+ "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n"
+ "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n",
+ mal->def->index,
+ get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR),
+ get_mal_dcrn(mal, MAL_IER),
+ get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR),
+ get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR),
+ get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR),
+ get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR)
+ );
+
+ printk("TX|");
+ for (i = 0; i < maldata->num_tx_chans; ++i) {
+ if (i && !(i % 4))
+ printk("\n ");
+ printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i)));
}
-}
-
-void emac_desc_dump(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- int curr_slot;
-
- printk(KERN_DEBUG
- "dumping the receive descriptors: current slot is %d\n",
- fep->rx_slot);
- for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) {
- printk(KERN_DEBUG
- "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n",
- curr_slot, fep->rx_desc[curr_slot].ctrl,
- fep->rx_desc[curr_slot].data_len,
- (unsigned int)fep->rx_desc[curr_slot].data_ptr);
+ printk("\nRX|");
+ for (i = 0; i < maldata->num_rx_chans; ++i) {
+ if (i && !(i % 4))
+ printk("\n ");
+ printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i)));
}
-}
-
-void emac_mac_dump(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- volatile emac_t *emacp = fep->emacp;
-
- printk(KERN_DEBUG "EMAC DEBUG ********** \n");
- printk(KERN_DEBUG "EMAC_M0 ==> 0x%x\n", in_be32(&emacp->em0mr0));
- printk(KERN_DEBUG "EMAC_M1 ==> 0x%x\n", in_be32(&emacp->em0mr1));
- printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0));
- printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1));
- printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr));
- printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr));
- printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser));
- printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr));
- printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr));
- printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n",
- in_be32(&emacp->em0vtpid));
-}
-
-void emac_mal_dump(struct net_device *dev)
-{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
-
- printk(KERN_DEBUG " MAL DEBUG ********** \n");
- printk(KERN_DEBUG " MCR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALCR));
- printk(KERN_DEBUG " ESR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALESR));
- printk(KERN_DEBUG " IER ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALIER));
-#ifdef CONFIG_40x
- printk(KERN_DEBUG " DBR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALDBR));
-#endif /* CONFIG_40x */
- printk(KERN_DEBUG " TXCASR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCASR));
- printk(KERN_DEBUG " TXCARR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCARR));
- printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXEOBISR));
- printk(KERN_DEBUG " TXDEIR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXDEIR));
- printk(KERN_DEBUG " RXCASR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCASR));
- printk(KERN_DEBUG " RXCARR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCARR));
- printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXEOBISR));
- printk(KERN_DEBUG " RXDEIR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXDEIR));
- printk(KERN_DEBUG " TXCTP0R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP0R));
- printk(KERN_DEBUG " TXCTP1R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP1R));
- printk(KERN_DEBUG " TXCTP2R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP2R));
- printk(KERN_DEBUG " TXCTP3R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP3R));
- printk(KERN_DEBUG " RXCTP0R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP0R));
- printk(KERN_DEBUG " RXCTP1R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP1R));
- printk(KERN_DEBUG " RCBS0 ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS0));
- printk(KERN_DEBUG " RCBS1 ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS1));
-}
-
-void emac_serr_dump_0(struct net_device *dev)
-{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
- unsigned long int mal_error, plb_error, plb_addr;
-
- mal_error = get_mal_dcrn(mal, DCRN_MALESR);
- printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n",
- (mal_error & 0x40000000) ? "Receive" :
- "Transmit", (mal_error & 0x3e000000) >> 25);
- printk(KERN_DEBUG " ----- latched error -----\n");
- if (mal_error & MALESR_DE)
- printk(KERN_DEBUG " DE: descriptor error\n");
- if (mal_error & MALESR_OEN)
- printk(KERN_DEBUG " ONE: OPB non-fullword error\n");
- if (mal_error & MALESR_OTE)
- printk(KERN_DEBUG " OTE: OPB timeout error\n");
- if (mal_error & MALESR_OSE)
- printk(KERN_DEBUG " OSE: OPB slave error\n");
-
- if (mal_error & MALESR_PEIN) {
- plb_error = mfdcr(DCRN_PLB0_BESR);
- printk(KERN_DEBUG
- " PEIN: PLB error, PLB0_BESR is 0x%x\n",
- (unsigned int)plb_error);
- plb_addr = mfdcr(DCRN_PLB0_BEAR);
- printk(KERN_DEBUG
- " PEIN: PLB error, PLB0_BEAR is 0x%x\n",
- (unsigned int)plb_addr);
+ printk("\n ");
+ for (i = 0; i < maldata->num_rx_chans; ++i) {
+ u32 r = get_mal_dcrn(mal, MAL_RCBS(i));
+ if (i && !(i % 3))
+ printk("\n ");
+ printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16);
}
+ printk("\n");
}
-void emac_serr_dump_1(struct net_device *dev)
+static struct ocp_enet_private *__emacs[4];
+static struct ibm_ocp_mal *__mals[1];
+
+void emac_dbg_register(int idx, struct ocp_enet_private *dev)
{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
- int mal_error = get_mal_dcrn(mal, DCRN_MALESR);
+ unsigned long flags;
- printk(KERN_DEBUG " ----- cumulative errors -----\n");
- if (mal_error & MALESR_DEI)
- printk(KERN_DEBUG " DEI: descriptor error interrupt\n");
- if (mal_error & MALESR_ONEI)
- printk(KERN_DEBUG " OPB non-fullword error interrupt\n");
- if (mal_error & MALESR_OTEI)
- printk(KERN_DEBUG " OTEI: timeout error interrupt\n");
- if (mal_error & MALESR_OSEI)
- printk(KERN_DEBUG " OSEI: slave error interrupt\n");
- if (mal_error & MALESR_PBEI)
- printk(KERN_DEBUG " PBEI: PLB bus error interrupt\n");
+ if (idx >= sizeof(__emacs) / sizeof(__emacs[0])) {
+ printk(KERN_WARNING
+ "invalid index %d when registering EMAC for debugging\n",
+ idx);
+ return;
+ }
+
+ local_irq_save(flags);
+ __emacs[idx] = dev;
+ local_irq_restore(flags);
}
-void emac_err_dump(struct net_device *dev, int em0isr)
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal)
{
- printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name);
+ unsigned long flags;
- if (em0isr & EMAC_ISR_OVR)
- printk(KERN_DEBUG " OVR: overrun\n");
- if (em0isr & EMAC_ISR_PP)
- printk(KERN_DEBUG " PP: control pause packet\n");
- if (em0isr & EMAC_ISR_BP)
- printk(KERN_DEBUG " BP: packet error\n");
- if (em0isr & EMAC_ISR_RP)
- printk(KERN_DEBUG " RP: runt packet\n");
- if (em0isr & EMAC_ISR_SE)
- printk(KERN_DEBUG " SE: short event\n");
- if (em0isr & EMAC_ISR_ALE)
- printk(KERN_DEBUG " ALE: odd number of nibbles in packet\n");
- if (em0isr & EMAC_ISR_BFCS)
- printk(KERN_DEBUG " BFCS: bad FCS\n");
- if (em0isr & EMAC_ISR_PTLE)
- printk(KERN_DEBUG " PTLE: oversized packet\n");
- if (em0isr & EMAC_ISR_ORE)
- printk(KERN_DEBUG
- " ORE: packet length field > max allowed LLC\n");
- if (em0isr & EMAC_ISR_IRE)
- printk(KERN_DEBUG " IRE: In Range error\n");
- if (em0isr & EMAC_ISR_DBDM)
- printk(KERN_DEBUG " DBDM: xmit error or SQE\n");
- if (em0isr & EMAC_ISR_DB0)
- printk(KERN_DEBUG " DB0: xmit error or SQE on TX channel 0\n");
- if (em0isr & EMAC_ISR_SE0)
- printk(KERN_DEBUG
- " SE0: Signal Quality Error test failure from TX channel 0\n");
- if (em0isr & EMAC_ISR_TE0)
- printk(KERN_DEBUG " TE0: xmit channel 0 aborted\n");
- if (em0isr & EMAC_ISR_DB1)
- printk(KERN_DEBUG " DB1: xmit error or SQE on TX channel \n");
- if (em0isr & EMAC_ISR_SE1)
- printk(KERN_DEBUG
- " SE1: Signal Quality Error test failure from TX channel 1\n");
- if (em0isr & EMAC_ISR_TE1)
- printk(KERN_DEBUG " TE1: xmit channel 1 aborted\n");
- if (em0isr & EMAC_ISR_MOS)
- printk(KERN_DEBUG " MOS\n");
- if (em0isr & EMAC_ISR_MOF)
- printk(KERN_DEBUG " MOF\n");
+ if (idx >= sizeof(__mals) / sizeof(__mals[0])) {
+ printk(KERN_WARNING
+ "invalid index %d when registering MAL for debugging\n",
+ idx);
+ return;
+ }
- emac_mac_dump(dev);
- emac_mal_dump(dev);
+ local_irq_save(flags);
+ __mals[idx] = mal;
+ local_irq_restore(flags);
}
+
+void emac_dbg_dump_all(void)
+{
+ unsigned int i;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ for (i = 0; i < sizeof(__mals) / sizeof(__mals[0]); ++i)
+ if (__mals[i])
+ emac_mal_dump(__mals[i]);
+
+ for (i = 0; i < sizeof(__emacs) / sizeof(__emacs[0]); ++i)
+ if (__emacs[i])
+ emac_mac_dump(i, __emacs[i]);
+
+ local_irq_restore(flags);
+}
+
+#if defined(CONFIG_MAGIC_SYSRQ)
+static void emac_sysrq_handler(int key, struct pt_regs *pt_regs,
+ struct tty_struct *tty)
+{
+ emac_dbg_dump_all();
+}
+
+static struct sysrq_key_op emac_sysrq_op = {
+ .handler = emac_sysrq_handler,
+ .help_msg = "emaC",
+ .action_msg = "Show EMAC(s) status",
+};
+
+int __init emac_init_debug(void)
+{
+ return register_sysrq_key('c', &emac_sysrq_op);
+}
+
+void __exit emac_fini_debug(void)
+{
+ unregister_sysrq_key('c', &emac_sysrq_op);
+}
+
+#else
+int __init emac_init_debug(void)
+{
+ return 0;
+}
+void __exit emac_fini_debug(void)
+{
+}
+#endif /* CONFIG_MAGIC_SYSRQ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h
new file mode 100644
index 0000000..e85fbe0
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_debug.h
@@ -0,0 +1,63 @@
+/*
+ * drivers/net/ibm_emac/ibm_ocp_debug.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_DEBUG_H_
+#define __IBM_EMAC_DEBUG_H_
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include "ibm_emac_core.h"
+#include "ibm_emac_mal.h"
+
+#if defined(CONFIG_IBM_EMAC_DEBUG)
+void emac_dbg_register(int idx, struct ocp_enet_private *dev);
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal);
+int emac_init_debug(void) __init;
+void emac_fini_debug(void) __exit;
+void emac_dbg_dump_all(void);
+# define DBG_LEVEL 1
+#else
+# define emac_dbg_register(x,y) ((void)0)
+# define mal_dbg_register(x,y) ((void)0)
+# define emac_init_debug() ((void)0)
+# define emac_fini_debug() ((void)0)
+# define emac_dbg_dump_all() ((void)0)
+# define DBG_LEVEL 0
+#endif
+
+#if DBG_LEVEL > 0
+# define DBG(f,x...) printk("emac" f, ##x)
+# define MAL_DBG(f,x...) printk("mal" f, ##x)
+# define ZMII_DBG(f,x...) printk("zmii" f, ##x)
+# define RGMII_DBG(f,x...) printk("rgmii" f, ##x)
+# define NL "\n"
+#else
+# define DBG(f,x...) ((void)0)
+# define MAL_DBG(f,x...) ((void)0)
+# define ZMII_DBG(f,x...) ((void)0)
+# define RGMII_DBG(f,x...) ((void)0)
+#endif
+#if DBG_LEVEL > 1
+# define DBG2(f,x...) DBG(f, ##x)
+# define MAL_DBG2(f,x...) MAL_DBG(f, ##x)
+# define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x)
+# define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x)
+#else
+# define DBG2(f,x...) ((void)0)
+# define MAL_DBG2(f,x...) ((void)0)
+# define ZMII_DBG2(f,x...) ((void)0)
+# define RGMII_DBG2(f,x...) ((void)0)
+#endif
+
+#endif /* __IBM_EMAC_DEBUG_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c
index e59f57f..da88d43 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.c
+++ b/drivers/net/ibm_emac/ibm_emac_mal.c
@@ -1,436 +1,565 @@
/*
- * ibm_ocp_mal.c
+ * drivers/net/ibm_emac/ibm_emac_mal.c
*
- * Armin Kuster akuster@mvista.com
- * Juen, 2002
+ * Memory Access Layer (MAL) support
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2002 MontaVista Softare Inc.
+ * Based on original work by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>,
+ * David Gibson <hermes@gibson.dropbear.id.au>,
+ *
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
-#include <asm/irq.h>
#include <asm/ocp.h>
+#include "ibm_emac_core.h"
#include "ibm_emac_mal.h"
+#include "ibm_emac_debug.h"
-// Locking: Should we share a lock with the client ? The client could provide
-// a lock pointer (optionally) in the commac structure... I don't think this is
-// really necessary though
-
-/* This lock protects the commac list. On today UP implementations, it's
- * really only used as IRQ protection in mal_{register,unregister}_commac()
- */
-static DEFINE_RWLOCK(mal_list_lock);
-
-int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+int __init mal_register_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac)
{
unsigned long flags;
+ local_irq_save(flags);
- write_lock_irqsave(&mal_list_lock, flags);
+ MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index,
+ commac->tx_chan_mask, commac->rx_chan_mask);
- /* Don't let multiple commacs claim the same channel */
+ /* Don't let multiple commacs claim the same channel(s) */
if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
(mal->rx_chan_mask & commac->rx_chan_mask)) {
- write_unlock_irqrestore(&mal_list_lock, flags);
+ local_irq_restore(flags);
+ printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n",
+ mal->def->index);
return -EBUSY;
}
mal->tx_chan_mask |= commac->tx_chan_mask;
mal->rx_chan_mask |= commac->rx_chan_mask;
+ list_add(&commac->list, &mal->list);
- list_add(&commac->list, &mal->commac);
-
- write_unlock_irqrestore(&mal_list_lock, flags);
-
+ local_irq_restore(flags);
return 0;
}
-int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+void __exit mal_unregister_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac)
{
unsigned long flags;
+ local_irq_save(flags);
- write_lock_irqsave(&mal_list_lock, flags);
+ MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index,
+ commac->tx_chan_mask, commac->rx_chan_mask);
mal->tx_chan_mask &= ~commac->tx_chan_mask;
mal->rx_chan_mask &= ~commac->rx_chan_mask;
-
list_del_init(&commac->list);
- write_unlock_irqrestore(&mal_list_lock, flags);
-
- return 0;
+ local_irq_restore(flags);
}
int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
{
- switch (channel) {
- case 0:
- set_mal_dcrn(mal, DCRN_MALRCBS0, size);
- break;
-#ifdef DCRN_MALRCBS1
- case 1:
- set_mal_dcrn(mal, DCRN_MALRCBS1, size);
- break;
-#endif
-#ifdef DCRN_MALRCBS2
- case 2:
- set_mal_dcrn(mal, DCRN_MALRCBS2, size);
- break;
-#endif
-#ifdef DCRN_MALRCBS3
- case 3:
- set_mal_dcrn(mal, DCRN_MALRCBS3, size);
- break;
-#endif
- default:
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_rx_chans ||
+ size > MAL_MAX_RX_SIZE);
+
+ MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size);
+
+ if (size & 0xf) {
+ printk(KERN_WARNING
+ "mal%d: incorrect RX size %lu for the channel %d\n",
+ mal->def->index, size, channel);
return -EINVAL;
}
+ set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4);
return 0;
}
+int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_tx_chans);
+ return channel * NUM_TX_BUFF;
+}
+
+int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_rx_chans);
+ return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF;
+}
+
+void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ local_bh_disable();
+ MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel);
+ set_mal_dcrn(mal, MAL_TXCASR,
+ get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel));
+ local_bh_enable();
+}
+
+void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel));
+ MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel);
+}
+
+void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ local_bh_disable();
+ MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel);
+ set_mal_dcrn(mal, MAL_RXCASR,
+ get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel));
+ local_bh_enable();
+}
+
+void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
+ MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel);
+}
+
+void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+ local_bh_disable();
+ MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac);
+ list_add_tail(&commac->poll_list, &mal->poll_list);
+ local_bh_enable();
+}
+
+void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+ local_bh_disable();
+ MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac);
+ list_del(&commac->poll_list);
+ local_bh_enable();
+}
+
+/* synchronized by mal_poll() */
+static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal)
+{
+ MAL_DBG2("%d: enable_irq" NL, mal->def->index);
+ set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE);
+}
+
+/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */
+static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal)
+{
+ set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE);
+ MAL_DBG2("%d: disable_irq" NL, mal->def->index);
+}
+
static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- unsigned long mal_error;
-
- /*
- * This SERR applies to one of the devices on the MAL, here we charge
- * it against the first EMAC registered for the MAL.
- */
-
- mal_error = get_mal_dcrn(mal, DCRN_MALESR);
-
- printk(KERN_ERR "%s: System Error (MALESR=%lx)\n",
- "MAL" /* FIXME: get the name right */ , mal_error);
-
- /* FIXME: decipher error */
- /* DIXME: distribute to commacs, if possible */
+ u32 esr = get_mal_dcrn(mal, MAL_ESR);
/* Clear the error status register */
- set_mal_dcrn(mal, DCRN_MALESR, mal_error);
+ set_mal_dcrn(mal, MAL_ESR, esr);
+ MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr);
+
+ if (esr & MAL_ESR_EVB) {
+ if (esr & MAL_ESR_DE) {
+ /* We ignore Descriptor error,
+ * TXDE or RXDE interrupt will be generated anyway.
+ */
+ return IRQ_HANDLED;
+ }
+
+ if (esr & MAL_ESR_PEIN) {
+ /* PLB error, it's probably buggy hardware or
+ * incorrect physical address in BD (i.e. bug)
+ */
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: system error, PLB (ESR = 0x%08x)\n",
+ mal->def->index, esr);
+ return IRQ_HANDLED;
+ }
+
+ /* OPB error, it's probably buggy hardware or incorrect EBC setup */
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: system error, OPB (ESR = 0x%08x)\n",
+ mal->def->index, esr);
+ }
return IRQ_HANDLED;
}
+static inline void mal_schedule_poll(struct ibm_ocp_mal *mal)
+{
+ if (likely(netif_rx_schedule_prep(&mal->poll_dev))) {
+ MAL_DBG2("%d: schedule_poll" NL, mal->def->index);
+ mal_disable_eob_irq(mal);
+ __netif_rx_schedule(&mal->poll_dev);
+ } else
+ MAL_DBG2("%d: already in poll" NL, mal->def->index);
+}
+
static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long isr;
-
- isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR);
- set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (isr & mc->tx_chan_mask) {
- mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
-
+ u32 r = get_mal_dcrn(mal, MAL_TXEOBISR);
+ MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r);
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_TXEOBISR, r);
return IRQ_HANDLED;
}
static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long isr;
-
- isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR);
- set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (isr & mc->rx_chan_mask) {
- mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
-
+ u32 r = get_mal_dcrn(mal, MAL_RXEOBISR);
+ MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r);
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_RXEOBISR, r);
return IRQ_HANDLED;
}
static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long deir;
+ u32 deir = get_mal_dcrn(mal, MAL_TXDEIR);
+ set_mal_dcrn(mal, MAL_TXDEIR, deir);
- deir = get_mal_dcrn(mal, DCRN_MALTXDEIR);
+ MAL_DBG("%d: txde %08x" NL, mal->def->index, deir);
- /* FIXME: print which MAL correctly */
- printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n",
- "MAL", deir);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (deir & mc->tx_chan_mask) {
- mc->ops->txde(mc->dev, deir & mc->tx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n",
+ mal->def->index, deir);
return IRQ_HANDLED;
}
-/*
- * This interrupt should be very rare at best. This occurs when
- * the hardware has a problem with the receive descriptors. The manual
- * states that it occurs when the hardware cannot the receive descriptor
- * empty bit is not set. The recovery mechanism will be to
- * traverse through the descriptors, handle any that are marked to be
- * handled and reinitialize each along the way. At that point the driver
- * will be restarted.
- */
static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
struct list_head *l;
- unsigned long deir;
+ u32 deir = get_mal_dcrn(mal, MAL_RXDEIR);
- deir = get_mal_dcrn(mal, DCRN_MALRXDEIR);
+ MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir);
- /*
- * This really is needed. This case encountered in stress testing.
- */
- if (deir == 0)
- return IRQ_HANDLED;
-
- /* FIXME: print which MAL correctly */
- printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n",
- "MAL", deir);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
+ list_for_each(l, &mal->list) {
struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
if (deir & mc->rx_chan_mask) {
- mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask);
+ mc->rx_stopped = 1;
+ mc->ops->rxde(mc->dev);
}
}
- read_unlock(&mal_list_lock);
+
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_RXDEIR, deir);
return IRQ_HANDLED;
}
+static int mal_poll(struct net_device *ndev, int *budget)
+{
+ struct ibm_ocp_mal *mal = ndev->priv;
+ struct list_head *l;
+ int rx_work_limit = min(ndev->quota, *budget), received = 0, done;
+
+ MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget,
+ rx_work_limit);
+ again:
+ /* Process TX skbs */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ mc->ops->poll_tx(mc->dev);
+ }
+
+ /* Process RX skbs.
+ * We _might_ need something more smart here to enforce polling fairness.
+ */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ int n = mc->ops->poll_rx(mc->dev, rx_work_limit);
+ if (n) {
+ received += n;
+ rx_work_limit -= n;
+ if (rx_work_limit <= 0) {
+ done = 0;
+ goto more_work; // XXX What if this is the last one ?
+ }
+ }
+ }
+
+ /* We need to disable IRQs to protect from RXDE IRQ here */
+ local_irq_disable();
+ __netif_rx_complete(ndev);
+ mal_enable_eob_irq(mal);
+ local_irq_enable();
+
+ done = 1;
+
+ /* Check for "rotting" packet(s) */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) {
+ MAL_DBG2("%d: rotting packet" NL, mal->def->index);
+ if (netif_rx_reschedule(ndev, received))
+ mal_disable_eob_irq(mal);
+ else
+ MAL_DBG2("%d: already in poll list" NL,
+ mal->def->index);
+
+ if (rx_work_limit > 0)
+ goto again;
+ else
+ goto more_work;
+ }
+ mc->ops->poll_tx(mc->dev);
+ }
+
+ more_work:
+ ndev->quota -= received;
+ *budget -= received;
+
+ MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, *budget,
+ done ? 0 : 1);
+ return done ? 0 : 1;
+}
+
+static void mal_reset(struct ibm_ocp_mal *mal)
+{
+ int n = 10;
+ MAL_DBG("%d: reset" NL, mal->def->index);
+
+ set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR);
+
+ /* Wait for reset to complete (1 system clock) */
+ while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n)
+ --n;
+
+ if (unlikely(!n))
+ printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index);
+}
+
+int mal_get_regs_len(struct ibm_ocp_mal *mal)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct ibm_mal_regs);
+}
+
+void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf)
+{
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1);
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ int i;
+
+ hdr->version = MAL_VERSION;
+ hdr->index = mal->def->index;
+
+ regs->tx_count = maldata->num_tx_chans;
+ regs->rx_count = maldata->num_rx_chans;
+
+ regs->cfg = get_mal_dcrn(mal, MAL_CFG);
+ regs->esr = get_mal_dcrn(mal, MAL_ESR);
+ regs->ier = get_mal_dcrn(mal, MAL_IER);
+ regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR);
+ regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR);
+ regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR);
+ regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR);
+ regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR);
+ regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR);
+ regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR);
+ regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR);
+
+ for (i = 0; i < regs->tx_count; ++i)
+ regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i));
+
+ for (i = 0; i < regs->rx_count; ++i) {
+ regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i));
+ regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i));
+ }
+ return regs + 1;
+}
+
static int __init mal_probe(struct ocp_device *ocpdev)
{
- struct ibm_ocp_mal *mal = NULL;
+ struct ibm_ocp_mal *mal;
struct ocp_func_mal_data *maldata;
- int err = 0;
+ int err = 0, i, bd_size;
- maldata = (struct ocp_func_mal_data *)ocpdev->def->additions;
+ MAL_DBG("%d: probe" NL, ocpdev->def->index);
+
+ maldata = ocpdev->def->additions;
if (maldata == NULL) {
- printk(KERN_ERR "mal%d: Missing additional datas !\n",
+ printk(KERN_ERR "mal%d: missing additional data!\n",
ocpdev->def->index);
return -ENODEV;
}
- mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
- if (mal == NULL) {
+ mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
+ if (!mal) {
printk(KERN_ERR
- "mal%d: Out of memory allocating MAL structure !\n",
+ "mal%d: out of memory allocating MAL structure!\n",
ocpdev->def->index);
return -ENOMEM;
}
- memset(mal, 0, sizeof(*mal));
+ mal->dcrbase = maldata->dcr_base;
+ mal->def = ocpdev->def;
- switch (ocpdev->def->index) {
- case 0:
- mal->dcrbase = DCRN_MAL_BASE;
- break;
-#ifdef DCRN_MAL1_BASE
- case 1:
- mal->dcrbase = DCRN_MAL1_BASE;
- break;
-#endif
- default:
- BUG();
- }
+ INIT_LIST_HEAD(&mal->poll_list);
+ set_bit(__LINK_STATE_START, &mal->poll_dev.state);
+ mal->poll_dev.weight = CONFIG_IBM_EMAC_POLL_WEIGHT;
+ mal->poll_dev.poll = mal_poll;
+ mal->poll_dev.priv = mal;
+ atomic_set(&mal->poll_dev.refcnt, 1);
- /**************************/
+ INIT_LIST_HEAD(&mal->list);
- INIT_LIST_HEAD(&mal->commac);
-
- set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF);
- set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF);
-
- set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR); /* 384 */
- /* FIXME: Add delay */
+ /* Load power-on reset defaults */
+ mal_reset(mal);
/* Set the MAL configuration register */
- set_mal_dcrn(mal, DCRN_MALCR,
- MALCR_PLBB | MALCR_OPBBL | MALCR_LEA |
- MALCR_PLBLT_DEFAULT);
+ set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB |
+ MAL_CFG_OPBBL | MAL_CFG_LEA);
- /* It would be nice to allocate buffers separately for each
- * channel, but we can't because the channels share the upper
- * 13 bits of address lines. Each channels buffer must also
- * be 4k aligned, so we allocate 4k for each channel. This is
- * inefficient FIXME: do better, if possible */
- mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
- MAL_DT_ALIGN *
- maldata->num_tx_chans,
- &mal->tx_phys_addr, GFP_KERNEL);
- if (mal->tx_virt_addr == NULL) {
+ mal_enable_eob_irq(mal);
+
+ /* Allocate space for BD rings */
+ BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32);
+ BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32);
+ bd_size = sizeof(struct mal_descriptor) *
+ (NUM_TX_BUFF * maldata->num_tx_chans +
+ NUM_RX_BUFF * maldata->num_rx_chans);
+ mal->bd_virt =
+ dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL);
+
+ if (!mal->bd_virt) {
printk(KERN_ERR
- "mal%d: Out of memory allocating MAL descriptors !\n",
- ocpdev->def->index);
+ "mal%d: out of memory allocating RX/TX descriptors!\n",
+ mal->def->index);
err = -ENOMEM;
goto fail;
}
+ memset(mal->bd_virt, 0, bd_size);
- /* God, oh, god, I hate DCRs */
- set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr);
-#ifdef DCRN_MALTXCTP1R
- if (maldata->num_tx_chans > 1)
- set_mal_dcrn(mal, DCRN_MALTXCTP1R,
- mal->tx_phys_addr + MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP1R */
-#ifdef DCRN_MALTXCTP2R
- if (maldata->num_tx_chans > 2)
- set_mal_dcrn(mal, DCRN_MALTXCTP2R,
- mal->tx_phys_addr + 2 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP2R */
-#ifdef DCRN_MALTXCTP3R
- if (maldata->num_tx_chans > 3)
- set_mal_dcrn(mal, DCRN_MALTXCTP3R,
- mal->tx_phys_addr + 3 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP3R */
-#ifdef DCRN_MALTXCTP4R
- if (maldata->num_tx_chans > 4)
- set_mal_dcrn(mal, DCRN_MALTXCTP4R,
- mal->tx_phys_addr + 4 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP4R */
-#ifdef DCRN_MALTXCTP5R
- if (maldata->num_tx_chans > 5)
- set_mal_dcrn(mal, DCRN_MALTXCTP5R,
- mal->tx_phys_addr + 5 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP5R */
-#ifdef DCRN_MALTXCTP6R
- if (maldata->num_tx_chans > 6)
- set_mal_dcrn(mal, DCRN_MALTXCTP6R,
- mal->tx_phys_addr + 6 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP6R */
-#ifdef DCRN_MALTXCTP7R
- if (maldata->num_tx_chans > 7)
- set_mal_dcrn(mal, DCRN_MALTXCTP7R,
- mal->tx_phys_addr + 7 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP7R */
+ for (i = 0; i < maldata->num_tx_chans; ++i)
+ set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma +
+ sizeof(struct mal_descriptor) *
+ mal_tx_bd_offset(mal, i));
- mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
- MAL_DT_ALIGN *
- maldata->num_rx_chans,
- &mal->rx_phys_addr, GFP_KERNEL);
-
- set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr);
-#ifdef DCRN_MALRXCTP1R
- if (maldata->num_rx_chans > 1)
- set_mal_dcrn(mal, DCRN_MALRXCTP1R,
- mal->rx_phys_addr + MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP1R */
-#ifdef DCRN_MALRXCTP2R
- if (maldata->num_rx_chans > 2)
- set_mal_dcrn(mal, DCRN_MALRXCTP2R,
- mal->rx_phys_addr + 2 * MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP2R */
-#ifdef DCRN_MALRXCTP3R
- if (maldata->num_rx_chans > 3)
- set_mal_dcrn(mal, DCRN_MALRXCTP3R,
- mal->rx_phys_addr + 3 * MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP3R */
+ for (i = 0; i < maldata->num_rx_chans; ++i)
+ set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma +
+ sizeof(struct mal_descriptor) *
+ mal_rx_bd_offset(mal, i));
err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
if (err)
- goto fail;
- err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal);
+ goto fail2;
+ err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal);
if (err)
- goto fail;
+ goto fail3;
err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
if (err)
- goto fail;
+ goto fail4;
err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
if (err)
- goto fail;
+ goto fail5;
err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
if (err)
- goto fail;
+ goto fail6;
- set_mal_dcrn(mal, DCRN_MALIER,
- MALIER_DE | MALIER_NE | MALIER_TE |
- MALIER_OPBE | MALIER_PLBE);
+ /* Enable all MAL SERR interrupt sources */
+ set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS);
- /* Advertise me to the rest of the world */
+ /* Advertise this instance to the rest of the world */
ocp_set_drvdata(ocpdev, mal);
- printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n",
- ocpdev->def->index, maldata->num_tx_chans,
- maldata->num_rx_chans);
+ mal_dbg_register(mal->def->index, mal);
+ printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n",
+ mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans);
return 0;
+ fail6:
+ free_irq(maldata->rxde_irq, mal);
+ fail5:
+ free_irq(maldata->txeob_irq, mal);
+ fail4:
+ free_irq(maldata->txde_irq, mal);
+ fail3:
+ free_irq(maldata->serr_irq, mal);
+ fail2:
+ dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma);
fail:
- /* FIXME: dispose requested IRQs ! */
- if (err && mal)
- kfree(mal);
+ kfree(mal);
return err;
}
static void __exit mal_remove(struct ocp_device *ocpdev)
{
struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
- struct ocp_func_mal_data *maldata = ocpdev->def->additions;
+ struct ocp_func_mal_data *maldata = mal->def->additions;
- BUG_ON(!maldata);
+ MAL_DBG("%d: remove" NL, mal->def->index);
+
+ /* Syncronize with scheduled polling,
+ stolen from net/core/dev.c:dev_close()
+ */
+ clear_bit(__LINK_STATE_START, &mal->poll_dev.state);
+ netif_poll_disable(&mal->poll_dev);
+
+ if (!list_empty(&mal->list)) {
+ /* This is *very* bad */
+ printk(KERN_EMERG
+ "mal%d: commac list is not empty on remove!\n",
+ mal->def->index);
+ }
ocp_set_drvdata(ocpdev, NULL);
- /* FIXME: shut down the MAL, deal with dependency with emac */
free_irq(maldata->serr_irq, mal);
free_irq(maldata->txde_irq, mal);
free_irq(maldata->txeob_irq, mal);
free_irq(maldata->rxde_irq, mal);
free_irq(maldata->rxeob_irq, mal);
- if (mal->tx_virt_addr)
- dma_free_coherent(&ocpdev->dev,
- MAL_DT_ALIGN * maldata->num_tx_chans,
- mal->tx_virt_addr, mal->tx_phys_addr);
+ mal_reset(mal);
- if (mal->rx_virt_addr)
- dma_free_coherent(&ocpdev->dev,
- MAL_DT_ALIGN * maldata->num_rx_chans,
- mal->rx_virt_addr, mal->rx_phys_addr);
+ mal_dbg_register(mal->def->index, NULL);
+
+ dma_free_coherent(&ocpdev->dev,
+ sizeof(struct mal_descriptor) *
+ (NUM_TX_BUFF * maldata->num_tx_chans +
+ NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt,
+ mal->bd_dma);
kfree(mal);
}
/* Structure for a device driver */
static struct ocp_device_id mal_ids[] = {
- {.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL},
- {.vendor = OCP_VENDOR_INVALID}
+ { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL },
+ { .vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver mal_driver = {
@@ -441,23 +570,14 @@
.remove = mal_remove,
};
-static int __init init_mals(void)
+int __init mal_init(void)
{
- int rc;
-
- rc = ocp_register_driver(&mal_driver);
- if (rc < 0) {
- ocp_unregister_driver(&mal_driver);
- return -ENODEV;
- }
-
- return 0;
+ MAL_DBG(": init" NL);
+ return ocp_register_driver(&mal_driver);
}
-static void __exit exit_mals(void)
+void __exit mal_exit(void)
{
+ MAL_DBG(": exit" NL);
ocp_unregister_driver(&mal_driver);
}
-
-module_init(init_mals);
-module_exit(exit_mals);
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
index dd9f0da..15b0bda 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ b/drivers/net/ibm_emac/ibm_emac_mal.h
@@ -1,131 +1,267 @@
-#ifndef _IBM_EMAC_MAL_H
-#define _IBM_EMAC_MAL_H
+/*
+ * drivers/net/ibm_emac/ibm_emac_mal.h
+ *
+ * Memory Access Layer (MAL) support
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_MAL_H_
+#define __IBM_EMAC_MAL_H_
+#include <linux/config.h>
+#include <linux/init.h>
#include <linux/list.h>
+#include <linux/netdevice.h>
-#define MAL_DT_ALIGN (4096) /* Alignment for each channel's descriptor table */
+#include <asm/io.h>
-#define MAL_CHAN_MASK(chan) (0x80000000 >> (chan))
+/*
+ * These MAL "versions" probably aren't the real versions IBM uses for these
+ * MAL cores, I assigned them just to make #ifdefs in this file nicer and
+ * reflect the fact that 40x and 44x have slightly different MALs. --ebs
+ */
+#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_NP405H)
+#define MAL_VERSION 1
+#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#define MAL_VERSION 2
+#else
+#error "Unknown SoC, please check chip manual and choose MAL 'version'"
+#endif
+
+/* MALx DCR registers */
+#define MAL_CFG 0x00
+#define MAL_CFG_SR 0x80000000
+#define MAL_CFG_PLBB 0x00004000
+#define MAL_CFG_OPBBL 0x00000080
+#define MAL_CFG_EOPIE 0x00000004
+#define MAL_CFG_LEA 0x00000002
+#define MAL_CFG_SD 0x00000001
+#if MAL_VERSION == 1
+#define MAL_CFG_PLBP_MASK 0x00c00000
+#define MAL_CFG_PLBP_10 0x00800000
+#define MAL_CFG_GA 0x00200000
+#define MAL_CFG_OA 0x00100000
+#define MAL_CFG_PLBLE 0x00080000
+#define MAL_CFG_PLBT_MASK 0x00078000
+#define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK)
+#elif MAL_VERSION == 2
+#define MAL_CFG_RPP_MASK 0x00c00000
+#define MAL_CFG_RPP_10 0x00800000
+#define MAL_CFG_RMBS_MASK 0x00300000
+#define MAL_CFG_WPP_MASK 0x000c0000
+#define MAL_CFG_WPP_10 0x00080000
+#define MAL_CFG_WMBS_MASK 0x00030000
+#define MAL_CFG_PLBLE 0x00008000
+#define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \
+ MAL_CFG_RPP_10 | MAL_CFG_WPP_10)
+#else
+#error "Unknown MAL version"
+#endif
+
+#define MAL_ESR 0x01
+#define MAL_ESR_EVB 0x80000000
+#define MAL_ESR_CIDT 0x40000000
+#define MAL_ESR_CID_MASK 0x3e000000
+#define MAL_ESR_CID_SHIFT 25
+#define MAL_ESR_DE 0x00100000
+#define MAL_ESR_OTE 0x00040000
+#define MAL_ESR_OSE 0x00020000
+#define MAL_ESR_PEIN 0x00010000
+#define MAL_ESR_DEI 0x00000010
+#define MAL_ESR_OTEI 0x00000004
+#define MAL_ESR_OSEI 0x00000002
+#define MAL_ESR_PBEI 0x00000001
+#if MAL_VERSION == 1
+#define MAL_ESR_ONE 0x00080000
+#define MAL_ESR_ONEI 0x00000008
+#elif MAL_VERSION == 2
+#define MAL_ESR_PTE 0x00800000
+#define MAL_ESR_PRE 0x00400000
+#define MAL_ESR_PWE 0x00200000
+#define MAL_ESR_PTEI 0x00000080
+#define MAL_ESR_PREI 0x00000040
+#define MAL_ESR_PWEI 0x00000020
+#else
+#error "Unknown MAL version"
+#endif
+
+#define MAL_IER 0x02
+#define MAL_IER_DE 0x00000010
+#define MAL_IER_OTE 0x00000004
+#define MAL_IER_OE 0x00000002
+#define MAL_IER_PE 0x00000001
+#if MAL_VERSION == 1
+#define MAL_IER_NWE 0x00000008
+#define MAL_IER_SOC_EVENTS MAL_IER_NWE
+#elif MAL_VERSION == 2
+#define MAL_IER_PT 0x00000080
+#define MAL_IER_PRE 0x00000040
+#define MAL_IER_PWE 0x00000020
+#define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE)
+#else
+#error "Unknown MAL version"
+#endif
+#define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \
+ MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE)
+
+#define MAL_TXCASR 0x04
+#define MAL_TXCARR 0x05
+#define MAL_TXEOBISR 0x06
+#define MAL_TXDEIR 0x07
+#define MAL_RXCASR 0x10
+#define MAL_RXCARR 0x11
+#define MAL_RXEOBISR 0x12
+#define MAL_RXDEIR 0x13
+#define MAL_TXCTPR(n) ((n) + 0x20)
+#define MAL_RXCTPR(n) ((n) + 0x40)
+#define MAL_RCBS(n) ((n) + 0x60)
+
+/* In reality MAL can handle TX buffers up to 4095 bytes long,
+ * but this isn't a good round number :) --ebs
+ */
+#define MAL_MAX_TX_SIZE 4080
+#define MAL_MAX_RX_SIZE 4080
+
+static inline int mal_rx_size(int len)
+{
+ len = (len + 0xf) & ~0xf;
+ return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len;
+}
+
+static inline int mal_tx_chunks(int len)
+{
+ return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE;
+}
+
+#define MAL_CHAN_MASK(n) (0x80000000 >> (n))
/* MAL Buffer Descriptor structure */
struct mal_descriptor {
- unsigned short ctrl; /* MAL / Commac status control bits */
- short data_len; /* Max length is 4K-1 (12 bits) */
- unsigned char *data_ptr; /* pointer to actual data buffer */
-} __attribute__ ((packed));
+ u16 ctrl; /* MAL / Commac status control bits */
+ u16 data_len; /* Max length is 4K-1 (12 bits) */
+ u32 data_ptr; /* pointer to actual data buffer */
+};
/* the following defines are for the MadMAL status and control registers. */
/* MADMAL transmit and receive status/control bits */
-#define MAL_RX_CTRL_EMPTY 0x8000
-#define MAL_RX_CTRL_WRAP 0x4000
-#define MAL_RX_CTRL_CM 0x2000
-#define MAL_RX_CTRL_LAST 0x1000
-#define MAL_RX_CTRL_FIRST 0x0800
-#define MAL_RX_CTRL_INTR 0x0400
+#define MAL_RX_CTRL_EMPTY 0x8000
+#define MAL_RX_CTRL_WRAP 0x4000
+#define MAL_RX_CTRL_CM 0x2000
+#define MAL_RX_CTRL_LAST 0x1000
+#define MAL_RX_CTRL_FIRST 0x0800
+#define MAL_RX_CTRL_INTR 0x0400
+#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST)
+#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE)
-#define MAL_TX_CTRL_READY 0x8000
-#define MAL_TX_CTRL_WRAP 0x4000
-#define MAL_TX_CTRL_CM 0x2000
-#define MAL_TX_CTRL_LAST 0x1000
-#define MAL_TX_CTRL_INTR 0x0400
+#define MAL_TX_CTRL_READY 0x8000
+#define MAL_TX_CTRL_WRAP 0x4000
+#define MAL_TX_CTRL_CM 0x2000
+#define MAL_TX_CTRL_LAST 0x1000
+#define MAL_TX_CTRL_INTR 0x0400
struct mal_commac_ops {
- void (*txeob) (void *dev, u32 chanmask);
- void (*txde) (void *dev, u32 chanmask);
- void (*rxeob) (void *dev, u32 chanmask);
- void (*rxde) (void *dev, u32 chanmask);
+ void (*poll_tx) (void *dev);
+ int (*poll_rx) (void *dev, int budget);
+ int (*peek_rx) (void *dev);
+ void (*rxde) (void *dev);
};
struct mal_commac {
- struct mal_commac_ops *ops;
- void *dev;
- u32 tx_chan_mask, rx_chan_mask;
- struct list_head list;
+ struct mal_commac_ops *ops;
+ void *dev;
+ struct list_head poll_list;
+ int rx_stopped;
+
+ u32 tx_chan_mask;
+ u32 rx_chan_mask;
+ struct list_head list;
};
struct ibm_ocp_mal {
- int dcrbase;
+ int dcrbase;
- struct list_head commac;
- u32 tx_chan_mask, rx_chan_mask;
+ struct list_head poll_list;
+ struct net_device poll_dev;
- dma_addr_t tx_phys_addr;
- struct mal_descriptor *tx_virt_addr;
+ struct list_head list;
+ u32 tx_chan_mask;
+ u32 rx_chan_mask;
- dma_addr_t rx_phys_addr;
- struct mal_descriptor *rx_virt_addr;
+ dma_addr_t bd_dma;
+ struct mal_descriptor *bd_virt;
+
+ struct ocp_def *def;
};
-#define GET_MAL_STANZA(base,dcrn) \
- case base: \
- x = mfdcr(dcrn(base)); \
- break;
-
-#define SET_MAL_STANZA(base,dcrn, val) \
- case base: \
- mtdcr(dcrn(base), (val)); \
- break;
-
-#define GET_MAL0_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL_BASE,dcrn)
-#define SET_MAL0_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL_BASE,dcrn,val)
-
-#ifdef DCRN_MAL1_BASE
-#define GET_MAL1_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL1_BASE,dcrn)
-#define SET_MAL1_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL1_BASE,dcrn,val)
-#else /* ! DCRN_MAL1_BASE */
-#define GET_MAL1_STANZA(dcrn)
-#define SET_MAL1_STANZA(dcrn,val)
-#endif
-
-#define get_mal_dcrn(mal, dcrn) ({ \
- u32 x; \
- switch ((mal)->dcrbase) { \
- GET_MAL0_STANZA(dcrn) \
- GET_MAL1_STANZA(dcrn) \
- default: \
- x = 0; \
- BUG(); \
- } \
-x; })
-
-#define set_mal_dcrn(mal, dcrn, val) do { \
- switch ((mal)->dcrbase) { \
- SET_MAL0_STANZA(dcrn,val) \
- SET_MAL1_STANZA(dcrn,val) \
- default: \
- BUG(); \
- } } while (0)
-
-static inline void mal_enable_tx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
+static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg)
{
- set_mal_dcrn(mal, DCRN_MALTXCASR,
- get_mal_dcrn(mal, DCRN_MALTXCASR) | chanmask);
+ return mfdcr(mal->dcrbase + reg);
}
-static inline void mal_disable_tx_channels(struct ibm_ocp_mal *mal,
- u32 chanmask)
+static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val)
{
- set_mal_dcrn(mal, DCRN_MALTXCARR, chanmask);
+ mtdcr(mal->dcrbase + reg, val);
}
-static inline void mal_enable_rx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
-{
- set_mal_dcrn(mal, DCRN_MALRXCASR,
- get_mal_dcrn(mal, DCRN_MALRXCASR) | chanmask);
-}
+/* Register MAL devices */
+int mal_init(void) __init;
+void mal_exit(void) __exit;
-static inline void mal_disable_rx_channels(struct ibm_ocp_mal *mal,
- u32 chanmask)
-{
- set_mal_dcrn(mal, DCRN_MALRXCARR, chanmask);
-}
+int mal_register_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac) __init;
+void mal_unregister_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac) __exit;
+int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size);
-extern int mal_register_commac(struct ibm_ocp_mal *mal,
- struct mal_commac *commac);
-extern int mal_unregister_commac(struct ibm_ocp_mal *mal,
- struct mal_commac *commac);
+/* Returns BD ring offset for a particular channel
+ (in 'struct mal_descriptor' elements)
+*/
+int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel);
+int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel);
-extern int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel,
- unsigned long size);
+void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel);
-#endif /* _IBM_EMAC_MAL_H */
+/* Add/remove EMAC to/from MAL polling list */
+void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac);
+void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac);
+
+/* Ethtool MAL registers */
+struct ibm_mal_regs {
+ u32 tx_count;
+ u32 rx_count;
+
+ u32 cfg;
+ u32 esr;
+ u32 ier;
+ u32 tx_casr;
+ u32 tx_carr;
+ u32 tx_eobisr;
+ u32 tx_deir;
+ u32 rx_casr;
+ u32 rx_carr;
+ u32 rx_eobisr;
+ u32 rx_deir;
+ u32 tx_ctpr[32];
+ u32 rx_ctpr[32];
+ u32 rcbs[32];
+};
+
+int mal_get_regs_len(struct ibm_ocp_mal *mal);
+void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf);
+
+#endif /* __IBM_EMAC_MAL_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c
index 14213f0..a27e49c 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.c
+++ b/drivers/net/ibm_emac/ibm_emac_phy.c
@@ -1,61 +1,256 @@
/*
- * ibm_ocp_phy.c
+ * drivers/net/ibm_emac/ibm_emac_phy.c
*
- * PHY drivers for the ibm ocp ethernet driver. Borrowed
- * from sungem_phy.c, though I only kept the generic MII
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
+ * Borrowed from sungem_phy.c, though I only kept the generic MII
* driver for now.
*
* This file should be shared with other drivers or eventually
* merged as the "low level" part of miilib
*
* (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
*
*/
-
#include <linux/config.h>
-
#include <linux/module.h>
-
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/types.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
+#include <asm/ocp.h>
+
#include "ibm_emac_phy.h"
-static int reset_one_mii_phy(struct mii_phy *phy, int phy_id)
+static inline int phy_read(struct mii_phy *phy, int reg)
{
- u16 val;
+ return phy->mdio_read(phy->dev, phy->address, reg);
+}
+
+static inline void phy_write(struct mii_phy *phy, int reg, int val)
+{
+ phy->mdio_write(phy->dev, phy->address, reg, val);
+}
+
+int mii_reset_phy(struct mii_phy *phy)
+{
+ int val;
int limit = 10000;
- val = __phy_read(phy, phy_id, MII_BMCR);
+ val = phy_read(phy, MII_BMCR);
val &= ~BMCR_ISOLATE;
val |= BMCR_RESET;
- __phy_write(phy, phy_id, MII_BMCR, val);
+ phy_write(phy, MII_BMCR, val);
- udelay(100);
+ udelay(300);
while (limit--) {
- val = __phy_read(phy, phy_id, MII_BMCR);
- if ((val & BMCR_RESET) == 0)
+ val = phy_read(phy, MII_BMCR);
+ if (val >= 0 && (val & BMCR_RESET) == 0)
break;
udelay(10);
}
if ((val & BMCR_ISOLATE) && limit > 0)
- __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
+ phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
- return (limit <= 0);
+ return limit <= 0;
}
+static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ int ctl, adv;
+
+ phy->autoneg = AUTONEG_ENABLE;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+ phy->advertising = advertise;
+
+ /* Setup standard advertise */
+ adv = phy_read(phy, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
+ phy_write(phy, MII_ADVERTISE, adv);
+
+ if (phy->features &
+ (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+ adv = phy_read(phy, MII_CTRL1000);
+ if (adv < 0)
+ return adv;
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ if (advertise & ADVERTISED_1000baseT_Full)
+ adv |= ADVERTISE_1000FULL;
+ if (advertise & ADVERTISED_1000baseT_Half)
+ adv |= ADVERTISE_1000HALF;
+ phy_write(phy, MII_CTRL1000, adv);
+ }
+
+ /* Start/Restart aneg */
+ ctl = phy_read(phy, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ int ctl;
+
+ phy->autoneg = AUTONEG_DISABLE;
+ phy->speed = speed;
+ phy->duplex = fd;
+ phy->pause = phy->asym_pause = 0;
+
+ ctl = phy_read(phy, MII_BMCR);
+ if (ctl < 0)
+ return ctl;
+ ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
+
+ /* First reset the PHY */
+ phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+ /* Select speed & duplex */
+ switch (speed) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ ctl |= BMCR_SPEED100;
+ break;
+ case SPEED_1000:
+ ctl |= BMCR_SPEED1000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (fd == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_poll_link(struct mii_phy *phy)
+{
+ int status;
+
+ /* Clear latched value with dummy read */
+ phy_read(phy, MII_BMSR);
+ status = phy_read(phy, MII_BMSR);
+ if (status < 0 || (status & BMSR_LSTATUS) == 0)
+ return 0;
+ if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
+ return 0;
+ return 1;
+}
+
+static int genmii_read_link(struct mii_phy *phy)
+{
+ if (phy->autoneg == AUTONEG_ENABLE) {
+ int glpa = 0;
+ int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
+ if (lpa < 0)
+ return lpa;
+
+ if (phy->features &
+ (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+ int adv = phy_read(phy, MII_CTRL1000);
+ glpa = phy_read(phy, MII_STAT1000);
+
+ if (glpa < 0 || adv < 0)
+ return adv;
+
+ glpa &= adv << 2;
+ }
+
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+
+ if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
+ phy->speed = SPEED_1000;
+ if (glpa & LPA_1000FULL)
+ phy->duplex = DUPLEX_FULL;
+ } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phy->speed = SPEED_100;
+ if (lpa & LPA_100FULL)
+ phy->duplex = DUPLEX_FULL;
+ } else if (lpa & LPA_10FULL)
+ phy->duplex = DUPLEX_FULL;
+
+ if (phy->duplex == DUPLEX_FULL) {
+ phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phy, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phy->duplex = DUPLEX_FULL;
+ else
+ phy->duplex = DUPLEX_HALF;
+ if (bmcr & BMCR_SPEED1000)
+ phy->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phy->speed = SPEED_100;
+ else
+ phy->speed = SPEED_10;
+
+ phy->pause = phy->asym_pause = 0;
+ }
+ return 0;
+}
+
+/* Generic implementation for most 10/100/1000 PHYs */
+static struct mii_phy_ops generic_phy_ops = {
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def genmii_phy_def = {
+ .phy_id = 0x00000000,
+ .phy_id_mask = 0x00000000,
+ .name = "Generic MII",
+ .ops = &generic_phy_ops
+};
+
+/* CIS8201 */
+#define MII_CIS8201_EPCR 0x17
+#define EPCR_MODE_MASK 0x3000
+#define EPCR_GMII_MODE 0x0000
+#define EPCR_RGMII_MODE 0x1000
+#define EPCR_TBI_MODE 0x2000
+#define EPCR_RTBI_MODE 0x3000
+
static int cis8201_init(struct mii_phy *phy)
{
- u16 epcr;
+ int epcr;
epcr = phy_read(phy, MII_CIS8201_EPCR);
+ if (epcr < 0)
+ return epcr;
+
epcr &= ~EPCR_MODE_MASK;
switch (phy->mode) {
@@ -78,178 +273,19 @@
return 0;
}
-static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
- u16 ctl, adv;
-
- phy->autoneg = 1;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
- phy->advertising = advertise;
-
- /* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- phy_write(phy, MII_ADVERTISE, adv);
-
- /* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
- u16 ctl;
-
- phy->autoneg = 0;
- phy->speed = speed;
- phy->duplex = fd;
- phy->pause = 0;
-
- ctl = phy_read(phy, MII_BMCR);
- ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
-
- /* First reset the PHY */
- phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
-
- /* Select speed & duplex */
- switch (speed) {
- case SPEED_10:
- break;
- case SPEED_100:
- ctl |= BMCR_SPEED100;
- break;
- case SPEED_1000:
- default:
- return -EINVAL;
- }
- if (fd == DUPLEX_FULL)
- ctl |= BMCR_FULLDPLX;
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_poll_link(struct mii_phy *phy)
-{
- u16 status;
-
- (void)phy_read(phy, MII_BMSR);
- status = phy_read(phy, MII_BMSR);
- if ((status & BMSR_LSTATUS) == 0)
- return 0;
- if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
- return 0;
- return 1;
-}
-
-#define MII_CIS8201_ACSR 0x1c
-#define ACSR_DUPLEX_STATUS 0x0020
-#define ACSR_SPEED_1000BASET 0x0010
-#define ACSR_SPEED_100BASET 0x0008
-
-static int cis8201_read_link(struct mii_phy *phy)
-{
- u16 acsr;
-
- if (phy->autoneg) {
- acsr = phy_read(phy, MII_CIS8201_ACSR);
-
- if (acsr & ACSR_DUPLEX_STATUS)
- phy->duplex = DUPLEX_FULL;
- else
- phy->duplex = DUPLEX_HALF;
- if (acsr & ACSR_SPEED_1000BASET) {
- phy->speed = SPEED_1000;
- } else if (acsr & ACSR_SPEED_100BASET)
- phy->speed = SPEED_100;
- else
- phy->speed = SPEED_10;
- phy->pause = 0;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-static int genmii_read_link(struct mii_phy *phy)
-{
- u16 lpa;
-
- if (phy->autoneg) {
- lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
-
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
-
- if (lpa & (LPA_100FULL | LPA_100HALF)) {
- phy->speed = SPEED_100;
- if (lpa & LPA_100FULL)
- phy->duplex = DUPLEX_FULL;
- } else if (lpa & LPA_10FULL)
- phy->duplex = DUPLEX_FULL;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
-#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
-
-/* CIS8201 phy ops */
static struct mii_phy_ops cis8201_phy_ops = {
- init:cis8201_init,
- setup_aneg:genmii_setup_aneg,
- setup_forced:genmii_setup_forced,
- poll_link:genmii_poll_link,
- read_link:cis8201_read_link
-};
-
-/* Generic implementation for most 10/100 PHYs */
-static struct mii_phy_ops generic_phy_ops = {
- setup_aneg:genmii_setup_aneg,
- setup_forced:genmii_setup_forced,
- poll_link:genmii_poll_link,
- read_link:genmii_read_link
+ .init = cis8201_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
};
static struct mii_phy_def cis8201_phy_def = {
- phy_id:0x000fc410,
- phy_id_mask:0x000ffff0,
- name:"CIS8201 Gigabit Ethernet",
- features:MII_GBIT_FEATURES,
- magic_aneg:0,
- ops:&cis8201_phy_ops
-};
-
-static struct mii_phy_def genmii_phy_def = {
- phy_id:0x00000000,
- phy_id_mask:0x00000000,
- name:"Generic MII",
- features:MII_BASIC_FEATURES,
- magic_aneg:0,
- ops:&generic_phy_ops
+ .phy_id = 0x000fc410,
+ .phy_id_mask = 0x000ffff0,
+ .name = "CIS8201 Gigabit Ethernet",
+ .ops = &cis8201_phy_ops
};
static struct mii_phy_def *mii_phy_table[] = {
@@ -258,39 +294,60 @@
NULL
};
-int mii_phy_probe(struct mii_phy *phy, int mii_id)
+int mii_phy_probe(struct mii_phy *phy, int address)
{
- int rc;
- u32 id;
struct mii_phy_def *def;
int i;
+ u32 id;
- phy->autoneg = 0;
+ phy->autoneg = AUTONEG_DISABLE;
phy->advertising = 0;
- phy->mii_id = mii_id;
- phy->speed = 0;
- phy->duplex = 0;
- phy->pause = 0;
+ phy->address = address;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
- /* Take PHY out of isloate mode and reset it. */
- rc = reset_one_mii_phy(phy, mii_id);
- if (rc)
+ /* Take PHY out of isolate mode and reset it. */
+ if (mii_reset_phy(phy))
return -ENODEV;
/* Read ID and find matching entry */
- id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2))
- & 0xfffffff0;
+ id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
if ((id & def->phy_id_mask) == def->phy_id)
break;
/* Should never be NULL (we have a generic entry), but... */
- if (def == NULL)
+ if (!def)
return -ENODEV;
phy->def = def;
+ /* Determine PHY features if needed */
+ phy->features = def->features;
+ if (!phy->features) {
+ u16 bmsr = phy_read(phy, MII_BMSR);
+ if (bmsr & BMSR_ANEGCAPABLE)
+ phy->features |= SUPPORTED_Autoneg;
+ if (bmsr & BMSR_10HALF)
+ phy->features |= SUPPORTED_10baseT_Half;
+ if (bmsr & BMSR_10FULL)
+ phy->features |= SUPPORTED_10baseT_Full;
+ if (bmsr & BMSR_100HALF)
+ phy->features |= SUPPORTED_100baseT_Half;
+ if (bmsr & BMSR_100FULL)
+ phy->features |= SUPPORTED_100baseT_Full;
+ if (bmsr & BMSR_ESTATEN) {
+ u16 esr = phy_read(phy, MII_ESTATUS);
+ if (esr & ESTATUS_1000_TFULL)
+ phy->features |= SUPPORTED_1000baseT_Full;
+ if (esr & ESTATUS_1000_THALF)
+ phy->features |= SUPPORTED_1000baseT_Half;
+ }
+ phy->features |= SUPPORTED_MII;
+ }
+
/* Setup default advertising */
- phy->advertising = def->features;
+ phy->advertising = phy->features;
return 0;
}
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h
index 61afbea..a70e0fe 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.h
+++ b/drivers/net/ibm_emac/ibm_emac_phy.h
@@ -1,65 +1,25 @@
-
/*
- * ibm_emac_phy.h
+ * drivers/net/ibm_emac/ibm_emac_phy.h
*
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support
*
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * February 2003
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * February 2003
+ *
+ * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*
* This file basically duplicates sungem_phy.{c,h} with different PHYs
* supported. I'm looking into merging that in a single mii layer more
* flexible than mii.c
*/
-#ifndef _IBM_EMAC_PHY_H_
-#define _IBM_EMAC_PHY_H_
-
-/*
- * PHY mode settings
- * Used for multi-mode capable PHYs
- */
-#define PHY_MODE_NA 0
-#define PHY_MODE_MII 1
-#define PHY_MODE_RMII 2
-#define PHY_MODE_SMII 3
-#define PHY_MODE_RGMII 4
-#define PHY_MODE_TBI 5
-#define PHY_MODE_GMII 6
-#define PHY_MODE_RTBI 7
-#define PHY_MODE_SGMII 8
-
-/*
- * PHY specific registers/values
- */
-
-/* CIS8201 */
-#define MII_CIS8201_EPCR 0x17
-#define EPCR_MODE_MASK 0x3000
-#define EPCR_GMII_MODE 0x0000
-#define EPCR_RGMII_MODE 0x1000
-#define EPCR_TBI_MODE 0x2000
-#define EPCR_RTBI_MODE 0x3000
+#ifndef _IBM_OCP_PHY_H_
+#define _IBM_OCP_PHY_H_
struct mii_phy;
@@ -77,7 +37,8 @@
struct mii_phy_def {
u32 phy_id; /* Concatenated ID1 << 16 | ID2 */
u32 phy_id_mask; /* Significant bits */
- u32 features; /* Ethtool SUPPORTED_* defines */
+ u32 features; /* Ethtool SUPPORTED_* defines or
+ 0 for autodetect */
int magic_aneg; /* Autoneg does all speed test for us */
const char *name;
const struct mii_phy_ops *ops;
@@ -86,8 +47,11 @@
/* An instance of a PHY, partially borrowed from mii_if_info */
struct mii_phy {
struct mii_phy_def *def;
- int advertising;
- int mii_id;
+ u32 advertising; /* Ethtool ADVERTISED_* defines */
+ u32 features; /* Copied from mii_phy_def.features
+ or determined automaticaly */
+ int address; /* PHY address */
+ int mode; /* PHY mode */
/* 1: autoneg enabled, 0: disabled */
int autoneg;
@@ -98,40 +62,19 @@
int speed;
int duplex;
int pause;
-
- /* PHY mode - if needed */
- int mode;
+ int asym_pause;
/* Provided by host chip */
struct net_device *dev;
- int (*mdio_read) (struct net_device * dev, int mii_id, int reg);
- void (*mdio_write) (struct net_device * dev, int mii_id, int reg,
+ int (*mdio_read) (struct net_device * dev, int addr, int reg);
+ void (*mdio_write) (struct net_device * dev, int addr, int reg,
int val);
};
/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
* filled, the remaining fields will be filled on return
*/
-extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
+int mii_phy_probe(struct mii_phy *phy, int address);
+int mii_reset_phy(struct mii_phy *phy);
-static inline int __phy_read(struct mii_phy *phy, int id, int reg)
-{
- return phy->mdio_read(phy->dev, id, reg);
-}
-
-static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val)
-{
- phy->mdio_write(phy->dev, id, reg, val);
-}
-
-static inline int phy_read(struct mii_phy *phy, int reg)
-{
- return phy->mdio_read(phy->dev, phy->mii_id, reg);
-}
-
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
-{
- phy->mdio_write(phy->dev, phy->mii_id, reg, val);
-}
-
-#endif /* _IBM_EMAC_PHY_H_ */
+#endif /* _IBM_OCP_PHY_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c
new file mode 100644
index 0000000..f0b1ffb
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.c
@@ -0,0 +1,201 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* RGMIIx_FER */
+#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4))
+#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4))
+#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4))
+#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4))
+#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4))
+
+/* RGMIIx_SSR */
+#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8))
+#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8))
+#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8))
+
+/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
+static inline int rgmii_valid_mode(int phy_mode)
+{
+ return phy_mode == PHY_MODE_GMII ||
+ phy_mode == PHY_MODE_RGMII ||
+ phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline const char *rgmii_mode_name(int mode)
+{
+ switch (mode) {
+ case PHY_MODE_RGMII:
+ return "RGMII";
+ case PHY_MODE_TBI:
+ return "TBI";
+ case PHY_MODE_GMII:
+ return "GMII";
+ case PHY_MODE_RTBI:
+ return "RTBI";
+ default:
+ BUG();
+ }
+}
+
+static inline u32 rgmii_mode_mask(int mode, int input)
+{
+ switch (mode) {
+ case PHY_MODE_RGMII:
+ return RGMII_FER_RGMII(input);
+ case PHY_MODE_TBI:
+ return RGMII_FER_TBI(input);
+ case PHY_MODE_GMII:
+ return RGMII_FER_GMII(input);
+ case PHY_MODE_RTBI:
+ return RGMII_FER_RTBI(input);
+ default:
+ BUG();
+ }
+}
+
+static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ struct rgmii_regs *p;
+
+ RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode);
+
+ if (!dev) {
+ dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR
+ "rgmii%d: couldn't allocate device structure!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+
+ p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr,
+ sizeof(struct rgmii_regs));
+ if (!p) {
+ printk(KERN_ERR
+ "rgmii%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ kfree(dev);
+ return -ENOMEM;
+ }
+
+ dev->base = p;
+ ocp_set_drvdata(ocpdev, dev);
+
+ /* Disable all inputs by default */
+ out_be32(&p->fer, 0);
+ } else
+ p = dev->base;
+
+ /* Enable this input */
+ out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
+
+ printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
+ ocpdev->def->index, input, rgmii_mode_name(mode));
+
+ ++dev->users;
+ return 0;
+}
+
+int __init rgmii_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ /* Check if we need to attach to a RGMII */
+ if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) {
+ dev->rgmii_input = emacdata->rgmii_mux;
+ dev->rgmii_dev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII,
+ emacdata->rgmii_idx);
+ if (!dev->rgmii_dev) {
+ printk(KERN_ERR "emac%d: unknown rgmii%d!\n",
+ dev->def->index, emacdata->rgmii_idx);
+ return -ENODEV;
+ }
+ if (rgmii_init
+ (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) {
+ printk(KERN_ERR
+ "emac%d: rgmii%d initialization failed!\n",
+ dev->def->index, emacdata->rgmii_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input);
+
+ RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+ if (speed == SPEED_1000)
+ ssr |= RGMII_SSR_1000(input);
+ else if (speed == SPEED_100)
+ ssr |= RGMII_SSR_100(input);
+
+ out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ BUG_ON(!dev || dev->users == 0);
+
+ RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+ /* Disable this input */
+ out_be32(&dev->base->fer,
+ in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input));
+
+ if (!--dev->users) {
+ /* Free everything if this is the last user */
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)dev->base);
+ kfree(dev);
+ }
+}
+
+int __rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct rgmii_regs);
+}
+
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h
index 49f188f..a1ffb8a 100644
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h
@@ -1,5 +1,7 @@
/*
- * Defines for the IBM RGMII bridge
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
* Based on ocp_zmii.h/ibm_emac_zmii.h
* Armin Kuster akuster@mvista.com
@@ -7,6 +9,9 @@
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -19,47 +24,42 @@
#include <linux/config.h>
/* RGMII bridge */
-typedef struct rgmii_regs {
+struct rgmii_regs {
u32 fer; /* Function enable register */
u32 ssr; /* Speed select register */
-} rgmii_t;
-
-#define RGMII_INPUTS 4
+};
/* RGMII device */
struct ibm_ocp_rgmii {
struct rgmii_regs *base;
- int mode[RGMII_INPUTS];
int users; /* number of EMACs using this RGMII bridge */
};
-/* Fuctional Enable Reg */
-#define RGMII_FER_MASK(x) (0x00000007 << (4*x))
-#define RGMII_RTBI 0x00000004
-#define RGMII_RGMII 0x00000005
-#define RGMII_TBI 0x00000006
-#define RGMII_GMII 0x00000007
+#ifdef CONFIG_IBM_EMAC_RGMII
+int rgmii_attach(void *emac) __init;
-/* Speed Selection reg */
+void __rgmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __rgmii_fini(ocpdev, input);
+}
-#define RGMII_SP2_100 0x00000002
-#define RGMII_SP2_1000 0x00000004
-#define RGMII_SP3_100 0x00000200
-#define RGMII_SP3_1000 0x00000400
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
-#define RGMII_MII2_SPDMASK 0x00000007
-#define RGMII_MII3_SPDMASK 0x00000700
+int __rgmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0;
+}
-#define RGMII_MII2_100MB RGMII_SP2_100 & ~RGMII_SP2_1000
-#define RGMII_MII2_1000MB RGMII_SP2_1000 & ~RGMII_SP2_100
-#define RGMII_MII2_10MB ~(RGMII_SP2_100 | RGMII_SP2_1000)
-#define RGMII_MII3_100MB RGMII_SP3_100 & ~RGMII_SP3_1000
-#define RGMII_MII3_1000MB RGMII_SP3_1000 & ~RGMII_SP3_100
-#define RGMII_MII3_10MB ~(RGMII_SP3_100 | RGMII_SP3_1000)
-
-#define RTBI 0
-#define RGMII 1
-#define TBI 2
-#define GMII 3
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define rgmii_attach(x) 0
+# define rgmii_fini(x,y) ((void)0)
+# define rgmii_set_speed(x,y,z) ((void)0)
+# define rgmii_get_regs_len(x) 0
+# define rgmii_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_RGMII */
#endif /* _IBM_EMAC_RGMII_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c
new file mode 100644
index 0000000..af08afc
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_tah.c
@@ -0,0 +1,111 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_tah.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
+ *
+ * Copyright 2004 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+
+static int __init tah_init(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p;
+
+ if (ocp_get_drvdata(ocpdev)) {
+ printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index);
+ return -EBUSY;
+ }
+
+ /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
+ p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p));
+ if (!p) {
+ printk(KERN_ERR "tah%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+ ocp_set_drvdata(ocpdev, p);
+ __tah_reset(ocpdev);
+
+ return 0;
+}
+
+int __init tah_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ /* Check if we need to attach to a TAH */
+ if (emacdata->tah_idx >= 0) {
+ dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
+ emacdata->tah_idx);
+ if (!dev->tah_dev) {
+ printk(KERN_ERR "emac%d: unknown tah%d!\n",
+ dev->def->index, emacdata->tah_idx);
+ return -ENODEV;
+ }
+ if (tah_init(dev->tah_dev)) {
+ printk(KERN_ERR
+ "emac%d: tah%d initialization failed!\n",
+ dev->def->index, emacdata->tah_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void __exit __tah_fini(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p = ocp_get_drvdata(ocpdev);
+ BUG_ON(!p);
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)p);
+}
+
+void __tah_reset(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p = ocp_get_drvdata(ocpdev);
+ int n;
+
+ /* Reset TAH */
+ out_be32(&p->mr, TAH_MR_SR);
+ n = 100;
+ while ((in_be32(&p->mr) & TAH_MR_SR) && n)
+ --n;
+
+ if (unlikely(!n))
+ printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index);
+
+ /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
+ out_be32(&p->mr,
+ TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
+ TAH_MR_DIG);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct tah_regs);
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct tah_regs *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev, sizeof(struct tah_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h
index ecfc698..9299b5d 100644
--- a/drivers/net/ibm_emac/ibm_emac_tah.h
+++ b/drivers/net/ibm_emac/ibm_emac_tah.h
@@ -1,9 +1,13 @@
/*
- * Defines for the IBM TAH
+ * drivers/net/ibm_emac/ibm_emac_tah.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -13,36 +17,72 @@
#ifndef _IBM_EMAC_TAH_H
#define _IBM_EMAC_TAH_H
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+
/* TAH */
-typedef struct tah_regs {
- u32 tah_revid;
+struct tah_regs {
+ u32 revid;
u32 pad[3];
- u32 tah_mr;
- u32 tah_ssr0;
- u32 tah_ssr1;
- u32 tah_ssr2;
- u32 tah_ssr3;
- u32 tah_ssr4;
- u32 tah_ssr5;
- u32 tah_tsr;
-} tah_t;
+ u32 mr;
+ u32 ssr0;
+ u32 ssr1;
+ u32 ssr2;
+ u32 ssr3;
+ u32 ssr4;
+ u32 ssr5;
+ u32 tsr;
+};
/* TAH engine */
-#define TAH_MR_CVR 0x80000000
-#define TAH_MR_SR 0x40000000
-#define TAH_MR_ST_256 0x01000000
-#define TAH_MR_ST_512 0x02000000
-#define TAH_MR_ST_768 0x03000000
-#define TAH_MR_ST_1024 0x04000000
-#define TAH_MR_ST_1280 0x05000000
-#define TAH_MR_ST_1536 0x06000000
-#define TAH_MR_TFS_16KB 0x00000000
-#define TAH_MR_TFS_2KB 0x00200000
-#define TAH_MR_TFS_4KB 0x00400000
-#define TAH_MR_TFS_6KB 0x00600000
-#define TAH_MR_TFS_8KB 0x00800000
-#define TAH_MR_TFS_10KB 0x00a00000
-#define TAH_MR_DTFP 0x00100000
-#define TAH_MR_DIG 0x00080000
+#define TAH_MR_CVR 0x80000000
+#define TAH_MR_SR 0x40000000
+#define TAH_MR_ST_256 0x01000000
+#define TAH_MR_ST_512 0x02000000
+#define TAH_MR_ST_768 0x03000000
+#define TAH_MR_ST_1024 0x04000000
+#define TAH_MR_ST_1280 0x05000000
+#define TAH_MR_ST_1536 0x06000000
+#define TAH_MR_TFS_16KB 0x00000000
+#define TAH_MR_TFS_2KB 0x00200000
+#define TAH_MR_TFS_4KB 0x00400000
+#define TAH_MR_TFS_6KB 0x00600000
+#define TAH_MR_TFS_8KB 0x00800000
+#define TAH_MR_TFS_10KB 0x00a00000
+#define TAH_MR_DTFP 0x00100000
+#define TAH_MR_DIG 0x00080000
+
+#ifdef CONFIG_IBM_EMAC_TAH
+int tah_attach(void *emac) __init;
+
+void __tah_fini(struct ocp_device *ocpdev) __exit;
+static inline void tah_fini(struct ocp_device *ocpdev)
+{
+ if (ocpdev)
+ __tah_fini(ocpdev);
+}
+
+void __tah_reset(struct ocp_device *ocpdev);
+static inline void tah_reset(struct ocp_device *ocpdev)
+{
+ if (ocpdev)
+ __tah_reset(ocpdev);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev);
+static inline int tah_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __tah_get_regs_len(ocpdev) : 0;
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define tah_attach(x) 0
+# define tah_fini(x) ((void)0)
+# define tah_reset(x) ((void)0)
+# define tah_get_regs_len(x) 0
+# define tah_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_TAH */
#endif /* _IBM_EMAC_TAH_H */
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c
new file mode 100644
index 0000000..35c1185
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.c
@@ -0,0 +1,255 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_zmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2001 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* ZMIIx_FER */
+#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4))
+#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
+ ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
+
+#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4))
+#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4))
+#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4))
+
+/* ZMIIx_SSR */
+#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4))
+#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4))
+#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4))
+
+/* ZMII only supports MII, RMII and SMII
+ * we also support autodetection for backward compatibility
+ */
+static inline int zmii_valid_mode(int mode)
+{
+ return mode == PHY_MODE_MII ||
+ mode == PHY_MODE_RMII ||
+ mode == PHY_MODE_SMII ||
+ mode == PHY_MODE_NA;
+}
+
+static inline const char *zmii_mode_name(int mode)
+{
+ switch (mode) {
+ case PHY_MODE_MII:
+ return "MII";
+ case PHY_MODE_RMII:
+ return "RMII";
+ case PHY_MODE_SMII:
+ return "SMII";
+ default:
+ BUG();
+ }
+}
+
+static inline u32 zmii_mode_mask(int mode, int input)
+{
+ switch (mode) {
+ case PHY_MODE_MII:
+ return ZMII_FER_MII(input);
+ case PHY_MODE_RMII:
+ return ZMII_FER_RMII(input);
+ case PHY_MODE_SMII:
+ return ZMII_FER_SMII(input);
+ default:
+ return 0;
+ }
+}
+
+static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ struct zmii_regs *p;
+
+ ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
+
+ if (!dev) {
+ dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR
+ "zmii%d: couldn't allocate device structure!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+ dev->mode = PHY_MODE_NA;
+
+ p = (struct zmii_regs *)ioremap(ocpdev->def->paddr,
+ sizeof(struct zmii_regs));
+ if (!p) {
+ printk(KERN_ERR
+ "zmii%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ kfree(dev);
+ return -ENOMEM;
+ }
+ dev->base = p;
+ ocp_set_drvdata(ocpdev, dev);
+
+ /* We may need FER value for autodetection later */
+ dev->fer_save = in_be32(&p->fer);
+
+ /* Disable all inputs by default */
+ out_be32(&p->fer, 0);
+ } else
+ p = dev->base;
+
+ if (!zmii_valid_mode(*mode)) {
+ /* Probably an EMAC connected to RGMII,
+ * but it still may need ZMII for MDIO
+ */
+ goto out;
+ }
+
+ /* Autodetect ZMII mode if not specified.
+ * This is only for backward compatibility with the old driver.
+ * Please, always specify PHY mode in your board port to avoid
+ * any surprises.
+ */
+ if (dev->mode == PHY_MODE_NA) {
+ if (*mode == PHY_MODE_NA) {
+ u32 r = dev->fer_save;
+
+ ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
+ ocpdev->def->index, r);
+
+ if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
+ dev->mode = PHY_MODE_MII;
+ else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
+ dev->mode = PHY_MODE_RMII;
+ else
+ dev->mode = PHY_MODE_SMII;
+ } else
+ dev->mode = *mode;
+
+ printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
+ ocpdev->def->index, zmii_mode_name(dev->mode));
+ } else {
+ /* All inputs must use the same mode */
+ if (*mode != PHY_MODE_NA && *mode != dev->mode) {
+ printk(KERN_ERR
+ "zmii%d: invalid mode %d specified for input %d\n",
+ ocpdev->def->index, *mode, input);
+ return -EINVAL;
+ }
+ }
+
+ /* Report back correct PHY mode,
+ * it may be used during PHY initialization.
+ */
+ *mode = dev->mode;
+
+ /* Enable this input */
+ out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
+ out:
+ ++dev->users;
+ return 0;
+}
+
+int __init zmii_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ if (emacdata->zmii_idx >= 0) {
+ dev->zmii_input = emacdata->zmii_mux;
+ dev->zmii_dev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
+ emacdata->zmii_idx);
+ if (!dev->zmii_dev) {
+ printk(KERN_ERR "emac%d: unknown zmii%d!\n",
+ dev->def->index, emacdata->zmii_idx);
+ return -ENODEV;
+ }
+ if (zmii_init
+ (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
+ printk(KERN_ERR
+ "emac%d: zmii%d initialization failed!\n",
+ dev->def->index, emacdata->zmii_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
+
+ ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
+
+ out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
+}
+
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ u32 ssr = in_be32(&dev->base->ssr);
+
+ ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+ if (speed == SPEED_100)
+ ssr |= ZMII_SSR_SP(input);
+ else
+ ssr &= ~ZMII_SSR_SP(input);
+
+ out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __zmii_fini(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ BUG_ON(!dev || dev->users == 0);
+
+ ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+ /* Disable this input */
+ out_be32(&dev->base->fer,
+ in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
+
+ if (!--dev->users) {
+ /* Free everything if this is the last user */
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)dev->base);
+ kfree(dev);
+ }
+}
+
+int __zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct zmii_regs);
+}
+
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h
index 6f6cd2a..0bb2606 100644
--- a/drivers/net/ibm_emac/ibm_emac_zmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.h
@@ -1,23 +1,27 @@
/*
- * ocp_zmii.h
+ * drivers/net/ibm_emac/ibm_emac_zmii.h
*
- * Defines for the IBM ZMII bridge
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
- * Armin Kuster akuster@mvista.com
- * Dec, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2001 MontaVista Softare Inc.
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#ifndef _IBM_EMAC_ZMII_H_
#define _IBM_EMAC_ZMII_H_
#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
/* ZMII bridge registers */
struct zmii_regs {
@@ -26,68 +30,54 @@
u32 smiirs; /* SMII status reg */
};
-#define ZMII_INPUTS 4
-
/* ZMII device */
struct ibm_ocp_zmii {
struct zmii_regs *base;
- int mode[ZMII_INPUTS];
+ int mode; /* subset of PHY_MODE_XXXX */
int users; /* number of EMACs using this ZMII bridge */
+ u32 fer_save; /* FER value left by firmware */
};
-/* Fuctional Enable Reg */
+#ifdef CONFIG_IBM_EMAC_ZMII
+int zmii_attach(void *emac) __init;
-#define ZMII_FER_MASK(x) (0xf0000000 >> (4*x))
+void __zmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void zmii_fini(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __zmii_fini(ocpdev, input);
+}
-#define ZMII_MDI0 0x80000000
-#define ZMII_SMII0 0x40000000
-#define ZMII_RMII0 0x20000000
-#define ZMII_MII0 0x10000000
-#define ZMII_MDI1 0x08000000
-#define ZMII_SMII1 0x04000000
-#define ZMII_RMII1 0x02000000
-#define ZMII_MII1 0x01000000
-#define ZMII_MDI2 0x00800000
-#define ZMII_SMII2 0x00400000
-#define ZMII_RMII2 0x00200000
-#define ZMII_MII2 0x00100000
-#define ZMII_MDI3 0x00080000
-#define ZMII_SMII3 0x00040000
-#define ZMII_RMII3 0x00020000
-#define ZMII_MII3 0x00010000
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input);
+static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __zmii_enable_mdio(ocpdev, input);
+}
-/* Speed Selection reg */
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
+static inline void zmii_set_speed(struct ocp_device *ocpdev, int input,
+ int speed)
+{
+ if (ocpdev)
+ __zmii_set_speed(ocpdev, input, speed);
+}
-#define ZMII_SCI0 0x40000000
-#define ZMII_FSS0 0x20000000
-#define ZMII_SP0 0x10000000
-#define ZMII_SCI1 0x04000000
-#define ZMII_FSS1 0x02000000
-#define ZMII_SP1 0x01000000
-#define ZMII_SCI2 0x00400000
-#define ZMII_FSS2 0x00200000
-#define ZMII_SP2 0x00100000
-#define ZMII_SCI3 0x00040000
-#define ZMII_FSS3 0x00020000
-#define ZMII_SP3 0x00010000
+int __zmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __zmii_get_regs_len(ocpdev) : 0;
+}
-#define ZMII_MII0_100MB ZMII_SP0
-#define ZMII_MII0_10MB ~ZMII_SP0
-#define ZMII_MII1_100MB ZMII_SP1
-#define ZMII_MII1_10MB ~ZMII_SP1
-#define ZMII_MII2_100MB ZMII_SP2
-#define ZMII_MII2_10MB ~ZMII_SP2
-#define ZMII_MII3_100MB ZMII_SP3
-#define ZMII_MII3_10MB ~ZMII_SP3
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf);
-/* SMII Status reg */
-
-#define ZMII_STS0 0xFF000000 /* EMAC0 smii status mask */
-#define ZMII_STS1 0x00FF0000 /* EMAC1 smii status mask */
-
-#define SMII 0
-#define RMII 1
-#define MII 2
-#define MDI 3
+#else
+# define zmii_attach(x) 0
+# define zmii_fini(x,y) ((void)0)
+# define zmii_enable_mdio(x,y) ((void)0)
+# define zmii_set_speed(x,y,z) ((void)0)
+# define zmii_get_regs_len(x) 0
+# define zmii_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_ZMII */
#endif /* _IBM_EMAC_ZMII_H_ */
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index cbe9368..e5246f2 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -96,7 +96,7 @@
static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter);
static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter);
static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
-static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter*);
+static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter);
#ifdef CONFIG_PROC_FS
#define IBMVETH_PROC_DIR "net/ibmveth"
@@ -181,6 +181,7 @@
atomic_set(&pool->available, 0);
pool->producer_index = 0;
pool->consumer_index = 0;
+ pool->active = 0;
return 0;
}
@@ -236,7 +237,7 @@
lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
if(lpar_rc != H_Success) {
- pool->free_map[free_index] = IBM_VETH_INVALID_MAP;
+ pool->free_map[free_index] = index;
pool->skbuff[index] = NULL;
pool->consumer_index--;
dma_unmap_single(&adapter->vdev->dev,
@@ -255,37 +256,19 @@
atomic_add(buffers_added, &(pool->available));
}
-/* check if replenishing is needed. */
-static inline int ibmveth_is_replenishing_needed(struct ibmveth_adapter *adapter)
-{
- return ((atomic_read(&adapter->rx_buff_pool[0].available) < adapter->rx_buff_pool[0].threshold) ||
- (atomic_read(&adapter->rx_buff_pool[1].available) < adapter->rx_buff_pool[1].threshold) ||
- (atomic_read(&adapter->rx_buff_pool[2].available) < adapter->rx_buff_pool[2].threshold));
-}
-
-/* kick the replenish tasklet if we need replenishing and it isn't already running */
-static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter *adapter)
-{
- if(ibmveth_is_replenishing_needed(adapter) &&
- (atomic_dec_if_positive(&adapter->not_replenishing) == 0)) {
- schedule_work(&adapter->replenish_task);
- }
-}
-
-/* replenish tasklet routine */
+/* replenish routine */
static void ibmveth_replenish_task(struct ibmveth_adapter *adapter)
{
+ int i;
+
adapter->replenish_task_cycles++;
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[0]);
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[1]);
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[2]);
+ for(i = 0; i < IbmVethNumBufferPools; i++)
+ if(adapter->rx_buff_pool[i].active)
+ ibmveth_replenish_buffer_pool(adapter,
+ &adapter->rx_buff_pool[i]);
adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8);
-
- atomic_inc(&adapter->not_replenishing);
-
- ibmveth_schedule_replenishing(adapter);
}
/* empty and free ana buffer pool - also used to do cleanup in error paths */
@@ -293,10 +276,8 @@
{
int i;
- if(pool->free_map) {
- kfree(pool->free_map);
- pool->free_map = NULL;
- }
+ kfree(pool->free_map);
+ pool->free_map = NULL;
if(pool->skbuff && pool->dma_addr) {
for(i = 0; i < pool->size; ++i) {
@@ -321,6 +302,7 @@
kfree(pool->skbuff);
pool->skbuff = NULL;
}
+ pool->active = 0;
}
/* remove a buffer from a pool */
@@ -379,6 +361,12 @@
ibmveth_assert(pool < IbmVethNumBufferPools);
ibmveth_assert(index < adapter->rx_buff_pool[pool].size);
+ if(!adapter->rx_buff_pool[pool].active) {
+ ibmveth_rxq_harvest_buffer(adapter);
+ ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[pool]);
+ return;
+ }
+
desc.desc = 0;
desc.fields.valid = 1;
desc.fields.length = adapter->rx_buff_pool[pool].buff_size;
@@ -409,6 +397,8 @@
static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
{
+ int i;
+
if(adapter->buffer_list_addr != NULL) {
if(!dma_mapping_error(adapter->buffer_list_dma)) {
dma_unmap_single(&adapter->vdev->dev,
@@ -443,26 +433,24 @@
adapter->rx_queue.queue_addr = NULL;
}
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[0]);
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[1]);
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[2]);
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[i]);
}
static int ibmveth_open(struct net_device *netdev)
{
struct ibmveth_adapter *adapter = netdev->priv;
u64 mac_address = 0;
- int rxq_entries;
+ int rxq_entries = 1;
unsigned long lpar_rc;
int rc;
union ibmveth_buf_desc rxq_desc;
+ int i;
ibmveth_debug_printk("open starting\n");
- rxq_entries =
- adapter->rx_buff_pool[0].size +
- adapter->rx_buff_pool[1].size +
- adapter->rx_buff_pool[2].size + 1;
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ rxq_entries += adapter->rx_buff_pool[i].size;
adapter->buffer_list_addr = (void*) get_zeroed_page(GFP_KERNEL);
adapter->filter_list_addr = (void*) get_zeroed_page(GFP_KERNEL);
@@ -502,14 +490,8 @@
adapter->rx_queue.num_slots = rxq_entries;
adapter->rx_queue.toggle = 1;
- if(ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[0]) ||
- ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[1]) ||
- ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[2]))
- {
- ibmveth_error_printk("unable to allocate buffer pools\n");
- ibmveth_cleanup(adapter);
- return -ENOMEM;
- }
+ /* call change_mtu to init the buffer pools based in initial mtu */
+ ibmveth_change_mtu(netdev, netdev->mtu);
memcpy(&mac_address, netdev->dev_addr, netdev->addr_len);
mac_address = mac_address >> 16;
@@ -552,10 +534,10 @@
return rc;
}
- netif_start_queue(netdev);
+ ibmveth_debug_printk("initial replenish cycle\n");
+ ibmveth_replenish_task(adapter);
- ibmveth_debug_printk("scheduling initial replenish cycle\n");
- ibmveth_schedule_replenishing(adapter);
+ netif_start_queue(netdev);
ibmveth_debug_printk("open complete\n");
@@ -573,9 +555,6 @@
free_irq(netdev->irq, netdev);
- cancel_delayed_work(&adapter->replenish_task);
- flush_scheduled_work();
-
do {
lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
} while (H_isLongBusy(lpar_rc) || (lpar_rc == H_Busy));
@@ -640,12 +619,18 @@
unsigned long lpar_rc;
int nfrags = 0, curfrag;
unsigned long correlator;
+ unsigned long flags;
unsigned int retry_count;
+ unsigned int tx_dropped = 0;
+ unsigned int tx_bytes = 0;
+ unsigned int tx_packets = 0;
+ unsigned int tx_send_failed = 0;
+ unsigned int tx_map_failed = 0;
+
if ((skb_shinfo(skb)->nr_frags + 1) > IbmVethMaxSendFrags) {
- adapter->stats.tx_dropped++;
- dev_kfree_skb(skb);
- return 0;
+ tx_dropped++;
+ goto out;
}
memset(&desc, 0, sizeof(desc));
@@ -664,10 +649,9 @@
if(dma_mapping_error(desc[0].fields.address)) {
ibmveth_error_printk("tx: unable to map initial fragment\n");
- adapter->tx_map_failed++;
- adapter->stats.tx_dropped++;
- dev_kfree_skb(skb);
- return 0;
+ tx_map_failed++;
+ tx_dropped++;
+ goto out;
}
curfrag = nfrags;
@@ -684,8 +668,8 @@
if(dma_mapping_error(desc[curfrag+1].fields.address)) {
ibmveth_error_printk("tx: unable to map fragment %d\n", curfrag);
- adapter->tx_map_failed++;
- adapter->stats.tx_dropped++;
+ tx_map_failed++;
+ tx_dropped++;
/* Free all the mappings we just created */
while(curfrag < nfrags) {
dma_unmap_single(&adapter->vdev->dev,
@@ -694,8 +678,7 @@
DMA_TO_DEVICE);
curfrag++;
}
- dev_kfree_skb(skb);
- return 0;
+ goto out;
}
}
@@ -720,11 +703,12 @@
ibmveth_error_printk("tx: desc[%i] valid=%d, len=%d, address=0x%d\n", i,
desc[i].fields.valid, desc[i].fields.length, desc[i].fields.address);
}
- adapter->tx_send_failed++;
- adapter->stats.tx_dropped++;
+ tx_send_failed++;
+ tx_dropped++;
} else {
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += skb->len;
+ tx_packets++;
+ tx_bytes += skb->len;
+ netdev->trans_start = jiffies;
}
do {
@@ -733,6 +717,14 @@
desc[nfrags].fields.length, DMA_TO_DEVICE);
} while(--nfrags >= 0);
+out: spin_lock_irqsave(&adapter->stats_lock, flags);
+ adapter->stats.tx_dropped += tx_dropped;
+ adapter->stats.tx_bytes += tx_bytes;
+ adapter->stats.tx_packets += tx_packets;
+ adapter->tx_send_failed += tx_send_failed;
+ adapter->tx_map_failed += tx_map_failed;
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+
dev_kfree_skb(skb);
return 0;
}
@@ -776,13 +768,14 @@
adapter->stats.rx_packets++;
adapter->stats.rx_bytes += length;
frames_processed++;
+ netdev->last_rx = jiffies;
}
} else {
more_work = 0;
}
} while(more_work && (frames_processed < max_frames_to_process));
- ibmveth_schedule_replenishing(adapter);
+ ibmveth_replenish_task(adapter);
if(more_work) {
/* more work to do - return that we are not done yet */
@@ -883,17 +876,54 @@
static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
{
- if ((new_mtu < 68) || (new_mtu > (1<<20)))
+ struct ibmveth_adapter *adapter = dev->priv;
+ int i;
+ int prev_smaller = 1;
+
+ if ((new_mtu < 68) ||
+ (new_mtu > (pool_size[IbmVethNumBufferPools-1]) - IBMVETH_BUFF_OH))
return -EINVAL;
+
+ for(i = 0; i<IbmVethNumBufferPools; i++) {
+ int activate = 0;
+ if (new_mtu > (pool_size[i] - IBMVETH_BUFF_OH)) {
+ activate = 1;
+ prev_smaller= 1;
+ } else {
+ if (prev_smaller)
+ activate = 1;
+ prev_smaller= 0;
+ }
+
+ if (activate && !adapter->rx_buff_pool[i].active) {
+ struct ibmveth_buff_pool *pool =
+ &adapter->rx_buff_pool[i];
+ if(ibmveth_alloc_buffer_pool(pool)) {
+ ibmveth_error_printk("unable to alloc pool\n");
+ return -ENOMEM;
+ }
+ adapter->rx_buff_pool[i].active = 1;
+ } else if (!activate && adapter->rx_buff_pool[i].active) {
+ adapter->rx_buff_pool[i].active = 0;
+ h_free_logical_lan_buffer(adapter->vdev->unit_address,
+ (u64)pool_size[i]);
+ }
+
+ }
+
+ /* kick the interrupt handler so that the new buffer pools get
+ replenished or deallocated */
+ ibmveth_interrupt(dev->irq, dev, NULL);
+
dev->mtu = new_mtu;
return 0;
}
static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
{
- int rc;
+ int rc, i;
struct net_device *netdev;
- struct ibmveth_adapter *adapter;
+ struct ibmveth_adapter *adapter = NULL;
unsigned char *mac_addr_p;
unsigned int *mcastFilterSize_p;
@@ -960,23 +990,21 @@
netdev->ethtool_ops = &netdev_ethtool_ops;
netdev->change_mtu = ibmveth_change_mtu;
SET_NETDEV_DEV(netdev, &dev->dev);
+ netdev->features |= NETIF_F_LLTX;
+ spin_lock_init(&adapter->stats_lock);
memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[0], 0, IbmVethPool0DftCnt, IbmVethPool0DftSize);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[1], 1, IbmVethPool1DftCnt, IbmVethPool1DftSize);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[2], 2, IbmVethPool2DftCnt, IbmVethPool2DftSize);
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ ibmveth_init_buffer_pool(&adapter->rx_buff_pool[i], i,
+ pool_count[i], pool_size[i]);
ibmveth_debug_printk("adapter @ 0x%p\n", adapter);
- INIT_WORK(&adapter->replenish_task, (void*)ibmveth_replenish_task, (void*)adapter);
-
adapter->buffer_list_dma = DMA_ERROR_CODE;
adapter->filter_list_dma = DMA_ERROR_CODE;
adapter->rx_queue.queue_dma = DMA_ERROR_CODE;
- atomic_set(&adapter->not_replenishing, 1);
-
ibmveth_debug_printk("registering netdev...\n");
rc = register_netdev(netdev);
diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h
index 51a470d..46919a8 100644
--- a/drivers/net/ibmveth.h
+++ b/drivers/net/ibmveth.h
@@ -49,6 +49,7 @@
#define H_SEND_LOGICAL_LAN 0x120
#define H_MULTICAST_CTRL 0x130
#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
/* hcall macros */
#define h_register_logical_lan(ua, buflst, rxq, fltlst, mac) \
@@ -69,13 +70,15 @@
#define h_change_logical_lan_mac(ua, mac) \
plpar_hcall_norets(H_CHANGE_LOGICAL_LAN_MAC, ua, mac)
-#define IbmVethNumBufferPools 3
-#define IbmVethPool0DftSize (1024 * 2)
-#define IbmVethPool1DftSize (1024 * 4)
-#define IbmVethPool2DftSize (1024 * 10)
-#define IbmVethPool0DftCnt 256
-#define IbmVethPool1DftCnt 256
-#define IbmVethPool2DftCnt 256
+#define h_free_logical_lan_buffer(ua, bufsize) \
+ plpar_hcall_norets(H_FREE_LOGICAL_LAN_BUFFER, ua, bufsize)
+
+#define IbmVethNumBufferPools 5
+#define IBMVETH_BUFF_OH 22 /* Overhead: 14 ethernet header + 8 opaque handle */
+
+/* pool_size should be sorted */
+static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 };
+static int pool_count[] = { 256, 768, 256, 256, 256 };
#define IBM_VETH_INVALID_MAP ((u16)0xffff)
@@ -90,6 +93,7 @@
u16 *free_map;
dma_addr_t *dma_addr;
struct sk_buff **skbuff;
+ int active;
};
struct ibmveth_rx_q {
@@ -114,10 +118,6 @@
dma_addr_t filter_list_dma;
struct ibmveth_buff_pool rx_buff_pool[IbmVethNumBufferPools];
struct ibmveth_rx_q rx_queue;
- atomic_t not_replenishing;
-
- /* helper tasks */
- struct work_struct replenish_task;
/* adapter specific stats */
u64 replenish_task_cycles;
@@ -131,6 +131,7 @@
u64 tx_linearize_failed;
u64 tx_map_failed;
u64 tx_send_failed;
+ spinlock_t stats_lock;
};
struct ibmveth_buf_desc_fields {
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index ca59140..d54156f 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -400,5 +400,15 @@
To compile it as a module, choose M here: the module will be called
via-ircc.
+config PXA_FICP
+ tristate "Intel PXA2xx Internal FICP"
+ depends on ARCH_PXA && IRDA
+ help
+ Say Y or M here if you want to build support for the PXA2xx
+ built-in IRDA interface which can support both SIR and FIR.
+ This driver relies on platform specific helper routines so
+ available capabilities may vary from one PXA2xx target to
+ another.
+
endmenu
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 29a8bd8..e7a8b7f 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -18,6 +18,7 @@
obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
obj-$(CONFIG_VIA_FIR) += via-ircc.o
+obj-$(CONFIG_PXA_FICP) += pxaficp_ir.o
# Old dongle drivers for old SIR drivers
obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o
obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 0a08c53..0282771 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1695,11 +1695,9 @@
freebufs:
for (i = 0; i < TX_SLOTS; ++i)
- if (self->tx_bufs[i])
- kfree (self->tx_bufs[i]);
+ kfree (self->tx_bufs[i]);
for (i = 0; i < RX_SLOTS; ++i)
- if (self->rx_bufs[i])
- kfree (self->rx_bufs[i]);
+ kfree (self->rx_bufs[i]);
kfree(self->ringbuf);
freeregion:
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 6c766fd..c22c051 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1168,10 +1168,8 @@
unregister_netdev(self->netdev);
/* Remove the speed buffer */
- if (self->speed_buff != NULL) {
- kfree(self->speed_buff);
- self->speed_buff = NULL;
- }
+ kfree(self->speed_buff);
+ self->speed_buff = NULL;
}
/********************** USB CONFIG SUBROUTINES **********************/
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index 5971315..3d016a4 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -235,8 +235,7 @@
__FUNCTION__, self->io.sir_base);
release_region(self->io.sir_base, self->io.sir_ext);
- if (self->tx_buff.head)
- kfree(self->tx_buff.head);
+ kfree(self->tx_buff.head);
if (self->rx_buff.skb)
kfree_skb(self->rx_buff.skb);
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
new file mode 100644
index 0000000..b886b07
--- /dev/null
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -0,0 +1,865 @@
+/*
+ * linux/drivers/net/irda/pxaficp_ir.c
+ *
+ * Based on sa1100_ir.c by Russell King
+ *
+ * Changes copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Infra-red driver (SIR/FIR) for the PXA2xx embedded microprocessor
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/delay.h>
+#include <asm/hardware.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa-regs.h>
+
+#ifdef CONFIG_MACH_MAINSTONE
+#include <asm/arch/mainstone.h>
+#endif
+
+#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
+#define IrSR_RXPL_POS_IS_ZERO 0x0
+#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
+#define IrSR_TXPL_POS_IS_ZERO 0x0
+#define IrSR_XMODE_PULSE_1_6 (1<<2)
+#define IrSR_XMODE_PULSE_3_16 0x0
+#define IrSR_RCVEIR_IR_MODE (1<<1)
+#define IrSR_RCVEIR_UART_MODE 0x0
+#define IrSR_XMITIR_IR_MODE (1<<0)
+#define IrSR_XMITIR_UART_MODE 0x0
+
+#define IrSR_IR_RECEIVE_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_IR_MODE | \
+ IrSR_XMITIR_UART_MODE)
+
+#define IrSR_IR_TRANSMIT_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_UART_MODE | \
+ IrSR_XMITIR_IR_MODE)
+
+struct pxa_irda {
+ int speed;
+ int newspeed;
+ unsigned long last_oscr;
+
+ unsigned char *dma_rx_buff;
+ unsigned char *dma_tx_buff;
+ dma_addr_t dma_rx_buff_phy;
+ dma_addr_t dma_tx_buff_phy;
+ unsigned int dma_tx_buff_len;
+ int txdma;
+ int rxdma;
+
+ struct net_device_stats stats;
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ iobuff_t tx_buff;
+ iobuff_t rx_buff;
+
+ struct device *dev;
+ struct pxaficp_platform_data *pdata;
+};
+
+
+#define IS_FIR(si) ((si)->speed >= 4000000)
+#define IRDA_FRAME_SIZE_LIMIT 2047
+
+inline static void pxa_irda_fir_dma_rx_start(struct pxa_irda *si)
+{
+ DCSR(si->rxdma) = DCSR_NODESC;
+ DSADR(si->rxdma) = __PREG(ICDR);
+ DTADR(si->rxdma) = si->dma_rx_buff_phy;
+ DCMD(si->rxdma) = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_WIDTH1 | DCMD_BURST32 | IRDA_FRAME_SIZE_LIMIT;
+ DCSR(si->rxdma) |= DCSR_RUN;
+}
+
+inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si)
+{
+ DCSR(si->txdma) = DCSR_NODESC;
+ DSADR(si->txdma) = si->dma_tx_buff_phy;
+ DTADR(si->txdma) = __PREG(ICDR);
+ DCMD(si->txdma) = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_ENDIRQEN | DCMD_WIDTH1 | DCMD_BURST32 | si->dma_tx_buff_len;
+ DCSR(si->txdma) |= DCSR_RUN;
+}
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
+{
+ unsigned long flags;
+ unsigned int divisor;
+
+ switch (speed) {
+ case 9600: case 19200: case 38400:
+ case 57600: case 115200:
+
+ /* refer to PXA250/210 Developer's Manual 10-7 */
+ /* BaudRate = 14.7456 MHz / (16*Divisor) */
+ divisor = 14745600 / (16 * speed);
+
+ local_irq_save(flags);
+
+ if (IS_FIR(si)) {
+ /* stop RX DMA */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ /* disable FICP */
+ ICCR0 = 0;
+ pxa_set_cken(CKEN13_FICP, 0);
+
+ /* set board transceiver to SIR mode */
+ si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
+
+ /* configure GPIO46/47 */
+ pxa_gpio_mode(GPIO46_STRXD_MD);
+ pxa_gpio_mode(GPIO47_STTXD_MD);
+
+ /* enable the STUART clock */
+ pxa_set_cken(CKEN5_STUART, 1);
+ }
+
+ /* disable STUART first */
+ STIER = 0;
+
+ /* access DLL & DLH */
+ STLCR |= LCR_DLAB;
+ STDLL = divisor & 0xff;
+ STDLH = divisor >> 8;
+ STLCR &= ~LCR_DLAB;
+
+ si->speed = speed;
+ STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6;
+ STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE;
+
+ local_irq_restore(flags);
+ break;
+
+ case 4000000:
+ local_irq_save(flags);
+
+ /* disable STUART */
+ STIER = 0;
+ STISR = 0;
+ pxa_set_cken(CKEN5_STUART, 0);
+
+ /* disable FICP first */
+ ICCR0 = 0;
+
+ /* set board transceiver to FIR mode */
+ si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
+
+ /* configure GPIO46/47 */
+ pxa_gpio_mode(GPIO46_ICPRXD_MD);
+ pxa_gpio_mode(GPIO47_ICPTXD_MD);
+
+ /* enable the FICP clock */
+ pxa_set_cken(CKEN13_FICP, 1);
+
+ si->speed = speed;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+ local_irq_restore(flags);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* SIR interrupt service routine. */
+static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct pxa_irda *si = netdev_priv(dev);
+ int iir, lsr, data;
+
+ iir = STIIR;
+
+ switch (iir & 0x0F) {
+ case 0x06: /* Receiver Line Status */
+ lsr = STLSR;
+ while (lsr & LSR_FIFOE) {
+ data = STRBR;
+ if (lsr & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) {
+ printk(KERN_DEBUG "pxa_ir: sir receiving error\n");
+ si->stats.rx_errors++;
+ if (lsr & LSR_FE)
+ si->stats.rx_frame_errors++;
+ if (lsr & LSR_OE)
+ si->stats.rx_fifo_errors++;
+ } else {
+ si->stats.rx_bytes++;
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, data);
+ }
+ lsr = STLSR;
+ }
+ dev->last_rx = jiffies;
+ si->last_oscr = OSCR;
+ break;
+
+ case 0x04: /* Received Data Available */
+ /* forth through */
+
+ case 0x0C: /* Character Timeout Indication */
+ do {
+ si->stats.rx_bytes++;
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, STRBR);
+ } while (STLSR & LSR_DR);
+ dev->last_rx = jiffies;
+ si->last_oscr = OSCR;
+ break;
+
+ case 0x02: /* Transmit FIFO Data Request */
+ while ((si->tx_buff.len) && (STLSR & LSR_TDRQ)) {
+ STTHR = *si->tx_buff.data++;
+ si->tx_buff.len -= 1;
+ }
+
+ if (si->tx_buff.len == 0) {
+ si->stats.tx_packets++;
+ si->stats.tx_bytes += si->tx_buff.data -
+ si->tx_buff.head;
+
+ /* We need to ensure that the transmitter has finished. */
+ while ((STLSR & LSR_TEMT) == 0)
+ cpu_relax();
+ si->last_oscr = OSCR;
+
+ /*
+ * Ok, we've finished transmitting. Now enable
+ * the receiver. Sometimes we get a receive IRQ
+ * immediately after a transmit...
+ */
+ if (si->newspeed) {
+ pxa_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ } else {
+ /* enable IR Receiver, disable IR Transmitter */
+ STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6;
+ /* enable STUART and receive interrupts */
+ STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE;
+ }
+ /* I'm hungry! */
+ netif_wake_queue(dev);
+ }
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* FIR Receive DMA interrupt handler */
+static void pxa_irda_fir_dma_rx_irq(int channel, void *data, struct pt_regs *regs)
+{
+ int dcsr = DCSR(channel);
+
+ DCSR(channel) = dcsr & ~DCSR_RUN;
+
+ printk(KERN_DEBUG "pxa_ir: fir rx dma bus error %#x\n", dcsr);
+}
+
+/* FIR Transmit DMA interrupt handler */
+static void pxa_irda_fir_dma_tx_irq(int channel, void *data, struct pt_regs *regs)
+{
+ struct net_device *dev = data;
+ struct pxa_irda *si = netdev_priv(dev);
+ int dcsr;
+
+ dcsr = DCSR(channel);
+ DCSR(channel) = dcsr & ~DCSR_RUN;
+
+ if (dcsr & DCSR_ENDINTR) {
+ si->stats.tx_packets++;
+ si->stats.tx_bytes += si->dma_tx_buff_len;
+ } else {
+ si->stats.tx_errors++;
+ }
+
+ while (ICSR1 & ICSR1_TBY)
+ cpu_relax();
+ si->last_oscr = OSCR;
+
+ /*
+ * HACK: It looks like the TBY bit is dropped too soon.
+ * Without this delay things break.
+ */
+ udelay(120);
+
+ if (si->newspeed) {
+ pxa_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ } else {
+ ICCR0 = 0;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+ }
+ netif_wake_queue(dev);
+}
+
+/* EIF(Error in FIFO/End in Frame) handler for FIR */
+static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev)
+{
+ unsigned int len, stat, data;
+
+ /* Get the current data position. */
+ len = DTADR(si->rxdma) - si->dma_rx_buff_phy;
+
+ do {
+ /* Read Status, and then Data. */
+ stat = ICSR1;
+ rmb();
+ data = ICDR;
+
+ if (stat & (ICSR1_CRE | ICSR1_ROR)) {
+ si->stats.rx_errors++;
+ if (stat & ICSR1_CRE) {
+ printk(KERN_DEBUG "pxa_ir: fir receive CRC error\n");
+ si->stats.rx_crc_errors++;
+ }
+ if (stat & ICSR1_ROR) {
+ printk(KERN_DEBUG "pxa_ir: fir receive overrun\n");
+ si->stats.rx_frame_errors++;
+ }
+ } else {
+ si->dma_rx_buff[len++] = data;
+ }
+ /* If we hit the end of frame, there's no point in continuing. */
+ if (stat & ICSR1_EOF)
+ break;
+ } while (ICSR0 & ICSR0_EIF);
+
+ if (stat & ICSR1_EOF) {
+ /* end of frame. */
+ struct sk_buff *skb = alloc_skb(len+1,GFP_ATOMIC);
+ if (!skb) {
+ printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n");
+ si->stats.rx_dropped++;
+ return;
+ }
+
+ /* Align IP header to 20 bytes */
+ skb_reserve(skb, 1);
+ memcpy(skb->data, si->dma_rx_buff, len);
+ skb_put(skb, len);
+
+ /* Feed it to IrLAP */
+ skb->dev = dev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+
+ si->stats.rx_packets++;
+ si->stats.rx_bytes += len;
+
+ dev->last_rx = jiffies;
+ }
+}
+
+/* FIR interrupt handler */
+static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct pxa_irda *si = netdev_priv(dev);
+ int icsr0;
+
+ /* stop RX DMA */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ si->last_oscr = OSCR;
+ icsr0 = ICSR0;
+
+ if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) {
+ if (icsr0 & ICSR0_FRE) {
+ printk(KERN_DEBUG "pxa_ir: fir receive frame error\n");
+ si->stats.rx_frame_errors++;
+ } else {
+ printk(KERN_DEBUG "pxa_ir: fir receive abort\n");
+ si->stats.rx_errors++;
+ }
+ ICSR0 = icsr0 & (ICSR0_FRE | ICSR0_RAB);
+ }
+
+ if (icsr0 & ICSR0_EIF) {
+ /* An error in FIFO occured, or there is a end of frame */
+ pxa_irda_fir_irq_eif(si, dev);
+ }
+
+ ICCR0 = 0;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+ return IRQ_HANDLED;
+}
+
+/* hard_xmit interface of irda device */
+static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ int speed = irda_get_next_speed(skb);
+
+ /*
+ * Does this packet contain a request to change the interface
+ * speed? If so, remember it until we complete the transmission
+ * of this frame.
+ */
+ if (speed != si->speed && speed != -1)
+ si->newspeed = speed;
+
+ /*
+ * If this is an empty frame, we can bypass a lot.
+ */
+ if (skb->len == 0) {
+ if (si->newspeed) {
+ si->newspeed = 0;
+ pxa_irda_set_speed(si, speed);
+ }
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ netif_stop_queue(dev);
+
+ if (!IS_FIR(si)) {
+ si->tx_buff.data = si->tx_buff.head;
+ si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, si->tx_buff.truesize);
+
+ /* Disable STUART interrupts and switch to transmit mode. */
+ STIER = 0;
+ STISR = IrSR_IR_TRANSMIT_ON | IrSR_XMODE_PULSE_1_6;
+
+ /* enable STUART and transmit interrupts */
+ STIER = IER_UUE | IER_TIE;
+ } else {
+ unsigned long mtt = irda_get_mtt(skb);
+
+ si->dma_tx_buff_len = skb->len;
+ memcpy(si->dma_tx_buff, skb->data, skb->len);
+
+ if (mtt)
+ while ((unsigned)(OSCR - si->last_oscr)/4 < mtt)
+ cpu_relax();
+
+ /* stop RX DMA, disable FICP */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ ICCR0 = 0;
+
+ pxa_irda_fir_dma_tx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_TXE;
+ }
+
+ dev_kfree_skb(skb);
+ dev->trans_start = jiffies;
+ return 0;
+}
+
+static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+ struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+ struct pxa_irda *si = netdev_priv(dev);
+ int ret;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ /*
+ * We are unable to set the speed if the
+ * device is not running.
+ */
+ if (netif_running(dev)) {
+ ret = pxa_irda_set_speed(si,
+ rq->ifr_baudrate);
+ } else {
+ printk(KERN_INFO "pxa_ir: SIOCSBANDWIDTH: !netif_running\n");
+ ret = 0;
+ }
+ }
+ break;
+
+ case SIOCSMEDIABUSY:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ irda_device_set_media_busy(dev, TRUE);
+ ret = 0;
+ }
+ break;
+
+ case SIOCGRECEIVING:
+ ret = 0;
+ rq->ifr_receiving = IS_FIR(si) ? 0
+ : si->rx_buff.state != OUTSIDE_FRAME;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ return ret;
+}
+
+static struct net_device_stats *pxa_irda_stats(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ return &si->stats;
+}
+
+static void pxa_irda_startup(struct pxa_irda *si)
+{
+ /* Disable STUART interrupts */
+ STIER = 0;
+ /* enable STUART interrupt to the processor */
+ STMCR = MCR_OUT2;
+ /* configure SIR frame format: StartBit - Data 7 ... Data 0 - Stop Bit */
+ STLCR = LCR_WLS0 | LCR_WLS1;
+ /* enable FIFO, we use FIFO to improve performance */
+ STFCR = FCR_TRFIFOE | FCR_ITL_32;
+
+ /* disable FICP */
+ ICCR0 = 0;
+ /* configure FICP ICCR2 */
+ ICCR2 = ICCR2_TXP | ICCR2_TRIG_32;
+
+ /* configure DMAC */
+ DRCMR17 = si->rxdma | DRCMR_MAPVLD;
+ DRCMR18 = si->txdma | DRCMR_MAPVLD;
+
+ /* force SIR reinitialization */
+ si->speed = 4000000;
+ pxa_irda_set_speed(si, 9600);
+
+ printk(KERN_DEBUG "pxa_ir: irda startup\n");
+}
+
+static void pxa_irda_shutdown(struct pxa_irda *si)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* disable STUART and interrupt */
+ STIER = 0;
+ /* disable STUART SIR mode */
+ STISR = 0;
+ /* disable the STUART clock */
+ pxa_set_cken(CKEN5_STUART, 0);
+
+ /* disable DMA */
+ DCSR(si->txdma) &= ~DCSR_RUN;
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ /* disable FICP */
+ ICCR0 = 0;
+ /* disable the FICP clock */
+ pxa_set_cken(CKEN13_FICP, 0);
+
+ DRCMR17 = 0;
+ DRCMR18 = 0;
+
+ local_irq_restore(flags);
+
+ /* power off board transceiver */
+ si->pdata->transceiver_mode(si->dev, IR_OFF);
+
+ printk(KERN_DEBUG "pxa_ir: irda shutdown\n");
+}
+
+static int pxa_irda_start(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ int err;
+
+ si->speed = 9600;
+
+ err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq1;
+
+ err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq2;
+
+ /*
+ * The interrupt must remain disabled for now.
+ */
+ disable_irq(IRQ_STUART);
+ disable_irq(IRQ_ICP);
+
+ err = -EBUSY;
+ si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev);
+ if (si->rxdma < 0)
+ goto err_rx_dma;
+
+ si->txdma = pxa_request_dma("FICP_TX",DMA_PRIO_LOW, pxa_irda_fir_dma_tx_irq, dev);
+ if (si->txdma < 0)
+ goto err_tx_dma;
+
+ err = -ENOMEM;
+ si->dma_rx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT,
+ &si->dma_rx_buff_phy, GFP_KERNEL );
+ if (!si->dma_rx_buff)
+ goto err_dma_rx_buff;
+
+ si->dma_tx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT,
+ &si->dma_tx_buff_phy, GFP_KERNEL );
+ if (!si->dma_tx_buff)
+ goto err_dma_tx_buff;
+
+ /* Setup the serial port for the initial speed. */
+ pxa_irda_startup(si);
+
+ /*
+ * Open a new IrLAP layer instance.
+ */
+ si->irlap = irlap_open(dev, &si->qos, "pxa");
+ err = -ENOMEM;
+ if (!si->irlap)
+ goto err_irlap;
+
+ /*
+ * Now enable the interrupt and start the queue
+ */
+ enable_irq(IRQ_STUART);
+ enable_irq(IRQ_ICP);
+ netif_start_queue(dev);
+
+ printk(KERN_DEBUG "pxa_ir: irda driver opened\n");
+
+ return 0;
+
+err_irlap:
+ pxa_irda_shutdown(si);
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy);
+err_dma_tx_buff:
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy);
+err_dma_rx_buff:
+ pxa_free_dma(si->txdma);
+err_tx_dma:
+ pxa_free_dma(si->rxdma);
+err_rx_dma:
+ free_irq(IRQ_ICP, dev);
+err_irq2:
+ free_irq(IRQ_STUART, dev);
+err_irq1:
+
+ return err;
+}
+
+static int pxa_irda_stop(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+
+ pxa_irda_shutdown(si);
+
+ /* Stop IrLAP */
+ if (si->irlap) {
+ irlap_close(si->irlap);
+ si->irlap = NULL;
+ }
+
+ free_irq(IRQ_STUART, dev);
+ free_irq(IRQ_ICP, dev);
+
+ pxa_free_dma(si->rxdma);
+ pxa_free_dma(si->txdma);
+
+ if (si->dma_rx_buff)
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy);
+ if (si->dma_tx_buff)
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy);
+
+ printk(KERN_DEBUG "pxa_ir: irda driver closed\n");
+ return 0;
+}
+
+static int pxa_irda_suspend(struct device *_dev, pm_message_t state)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct pxa_irda *si;
+
+ if (dev && netif_running(dev)) {
+ si = netdev_priv(dev);
+ netif_device_detach(dev);
+ pxa_irda_shutdown(si);
+ }
+
+ return 0;
+}
+
+static int pxa_irda_resume(struct device *_dev)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct pxa_irda *si;
+
+ if (dev && netif_running(dev)) {
+ si = netdev_priv(dev);
+ pxa_irda_startup(si);
+ netif_device_attach(dev);
+ netif_wake_queue(dev);
+ }
+
+ return 0;
+}
+
+
+static int pxa_irda_init_iobuf(iobuff_t *io, int size)
+{
+ io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
+ if (io->head != NULL) {
+ io->truesize = size;
+ io->in_frame = FALSE;
+ io->state = OUTSIDE_FRAME;
+ io->data = io->head;
+ }
+ return io->head ? 0 : -ENOMEM;
+}
+
+static int pxa_irda_probe(struct device *_dev)
+{
+ struct platform_device *pdev = to_platform_device(_dev);
+ struct net_device *dev;
+ struct pxa_irda *si;
+ unsigned int baudrate_mask;
+ int err;
+
+ if (!pdev->dev.platform_data)
+ return -ENODEV;
+
+ err = request_mem_region(__PREG(STUART), 0x24, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_1;
+
+ err = request_mem_region(__PREG(FICP), 0x1c, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_2;
+
+ dev = alloc_irdadev(sizeof(struct pxa_irda));
+ if (!dev)
+ goto err_mem_3;
+
+ si = netdev_priv(dev);
+ si->dev = &pdev->dev;
+ si->pdata = pdev->dev.platform_data;
+
+ /*
+ * Initialise the SIR buffers
+ */
+ err = pxa_irda_init_iobuf(&si->rx_buff, 14384);
+ if (err)
+ goto err_mem_4;
+ err = pxa_irda_init_iobuf(&si->tx_buff, 4000);
+ if (err)
+ goto err_mem_5;
+
+ dev->hard_start_xmit = pxa_irda_hard_xmit;
+ dev->open = pxa_irda_start;
+ dev->stop = pxa_irda_stop;
+ dev->do_ioctl = pxa_irda_ioctl;
+ dev->get_stats = pxa_irda_stats;
+
+ irda_init_max_qos_capabilies(&si->qos);
+
+ baudrate_mask = 0;
+ if (si->pdata->transceiver_cap & IR_SIRMODE)
+ baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ if (si->pdata->transceiver_cap & IR_FIRMODE)
+ baudrate_mask |= IR_4000000 << 8;
+
+ si->qos.baud_rate.bits &= baudrate_mask;
+ si->qos.min_turn_time.bits = 7; /* 1ms or more */
+
+ irda_qos_bits_to_value(&si->qos);
+
+ err = register_netdev(dev);
+
+ if (err == 0)
+ dev_set_drvdata(&pdev->dev, dev);
+
+ if (err) {
+ kfree(si->tx_buff.head);
+err_mem_5:
+ kfree(si->rx_buff.head);
+err_mem_4:
+ free_netdev(dev);
+err_mem_3:
+ release_mem_region(__PREG(FICP), 0x1c);
+err_mem_2:
+ release_mem_region(__PREG(STUART), 0x24);
+ }
+err_mem_1:
+ return err;
+}
+
+static int pxa_irda_remove(struct device *_dev)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+
+ if (dev) {
+ struct pxa_irda *si = netdev_priv(dev);
+ unregister_netdev(dev);
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ }
+
+ release_mem_region(__PREG(STUART), 0x24);
+ release_mem_region(__PREG(FICP), 0x1c);
+
+ return 0;
+}
+
+static struct device_driver pxa_ir_driver = {
+ .name = "pxa2xx-ir",
+ .bus = &platform_bus_type,
+ .probe = pxa_irda_probe,
+ .remove = pxa_irda_remove,
+ .suspend = pxa_irda_suspend,
+ .resume = pxa_irda_resume,
+};
+
+static int __init pxa_irda_init(void)
+{
+ return driver_register(&pxa_ir_driver);
+}
+
+static void __exit pxa_irda_exit(void)
+{
+ driver_unregister(&pxa_ir_driver);
+}
+
+module_init(pxa_irda_init);
+module_exit(pxa_irda_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 8d34ac6..0688330 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -291,12 +291,12 @@
/*
* Suspend the IrDA interface.
*/
-static int sa1100_irda_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int sa1100_irda_suspend(struct device *_dev, pm_message_t state)
{
struct net_device *dev = dev_get_drvdata(_dev);
struct sa1100_irda *si;
- if (!dev || level != SUSPEND_DISABLE)
+ if (!dev)
return 0;
si = dev->priv;
@@ -316,12 +316,12 @@
/*
* Resume the IrDA interface.
*/
-static int sa1100_irda_resume(struct device *_dev, u32 level)
+static int sa1100_irda_resume(struct device *_dev)
{
struct net_device *dev = dev_get_drvdata(_dev);
struct sa1100_irda *si;
- if (!dev || level != RESUME_ENABLE)
+ if (!dev)
return 0;
si = dev->priv;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index efc5a88..df22b8b 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -490,8 +490,7 @@
{
if (dev->rx_buff.skb)
kfree_skb(dev->rx_buff.skb);
- if (dev->tx_buff.head)
- kfree(dev->tx_buff.head);
+ kfree(dev->tx_buff.head);
dev->rx_buff.head = dev->tx_buff.head = NULL;
dev->rx_buff.skb = NULL;
}
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index dd89bda..140b7cd 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -213,8 +213,8 @@
/* Power Management */
-static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level);
-static int smsc_ircc_resume(struct device *dev, u32 level);
+static int smsc_ircc_suspend(struct device *dev, pm_message_t state);
+static int smsc_ircc_resume(struct device *dev);
static struct device_driver smsc_ircc_driver = {
.name = SMSC_IRCC2_DRIVER_NAME,
@@ -638,21 +638,14 @@
*/
static void smsc_ircc_init_chip(struct smsc_ircc_cb *self)
{
- int iobase, ir_mode, ctrl, fast;
-
- IRDA_ASSERT(self != NULL, return;);
-
- iobase = self->io.fir_base;
- ir_mode = IRCC_CFGA_IRDA_SIR_A;
- ctrl = 0;
- fast = 0;
+ int iobase = self->io.fir_base;
register_bank(iobase, 0);
outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
outb(0x00, iobase + IRCC_MASTER);
register_bank(iobase, 1);
- outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | ir_mode),
+ outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A),
iobase + IRCC_SCE_CFGA);
#ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
@@ -666,10 +659,10 @@
outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD);
register_bank(iobase, 4);
- outb((inb(iobase + IRCC_CONTROL) & 0x30) | ctrl, iobase + IRCC_CONTROL);
+ outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL);
register_bank(iobase, 0);
- outb(fast, iobase + IRCC_LCR_A);
+ outb(0, iobase + IRCC_LCR_A);
smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
@@ -1556,6 +1549,46 @@
}
#endif /* unused */
+static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
+{
+ int error;
+
+ error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
+ self->netdev->name, self->netdev);
+ if (error)
+ IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
+ __FUNCTION__, self->io.irq, error);
+
+ return error;
+}
+
+static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ self->io.speed = 0;
+ smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+}
+
+static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self)
+{
+ int iobase = self->io.fir_base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ register_bank(iobase, 0);
+ outb(0, iobase + IRCC_IER);
+ outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
+ outb(0x00, iobase + IRCC_MASTER);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+}
+
/*
* Function smsc_ircc_net_open (dev)
@@ -1567,7 +1600,6 @@
{
struct smsc_ircc_cb *self;
char hwname[16];
- unsigned long flags;
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
@@ -1575,6 +1607,11 @@
self = netdev_priv(dev);
IRDA_ASSERT(self != NULL, return 0;);
+ if (self->io.suspended) {
+ IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__);
+ return -EAGAIN;
+ }
+
if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
(void *) dev)) {
IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
@@ -1582,11 +1619,7 @@
return -EAGAIN;
}
- spin_lock_irqsave(&self->lock, flags);
- /*smsc_ircc_sir_start(self);*/
- self->io.speed = 0;
- smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
- spin_unlock_irqrestore(&self->lock, flags);
+ smsc_ircc_start_interrupts(self);
/* Give self a hardware name */
/* It would be cool to offer the chip revision here - Jean II */
@@ -1639,37 +1672,63 @@
irlap_close(self->irlap);
self->irlap = NULL;
- free_irq(self->io.irq, dev);
+ smsc_ircc_stop_interrupts(self);
+
+ /* if we are called from smsc_ircc_resume we don't have IRQ reserved */
+ if (!self->io.suspended)
+ free_irq(self->io.irq, dev);
+
disable_dma(self->io.dma);
free_dma(self->io.dma);
return 0;
}
-static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level)
+static int smsc_ircc_suspend(struct device *dev, pm_message_t state)
{
struct smsc_ircc_cb *self = dev_get_drvdata(dev);
- IRDA_MESSAGE("%s, Suspending\n", driver_name);
+ if (!self->io.suspended) {
+ IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
- if (level == SUSPEND_DISABLE && !self->io.suspended) {
- smsc_ircc_net_close(self->netdev);
+ rtnl_lock();
+ if (netif_running(self->netdev)) {
+ netif_device_detach(self->netdev);
+ smsc_ircc_stop_interrupts(self);
+ free_irq(self->io.irq, self->netdev);
+ disable_dma(self->io.dma);
+ }
self->io.suspended = 1;
+ rtnl_unlock();
}
return 0;
}
-static int smsc_ircc_resume(struct device *dev, u32 level)
+static int smsc_ircc_resume(struct device *dev)
{
struct smsc_ircc_cb *self = dev_get_drvdata(dev);
- if (level == RESUME_ENABLE && self->io.suspended) {
+ if (self->io.suspended) {
+ IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
- smsc_ircc_net_open(self->netdev);
+ rtnl_lock();
+ smsc_ircc_init_chip(self);
+ if (netif_running(self->netdev)) {
+ if (smsc_ircc_request_irq(self)) {
+ /*
+ * Don't fail resume process, just kill this
+ * network interface
+ */
+ unregister_netdevice(self->netdev);
+ } else {
+ enable_dma(self->io.dma);
+ smsc_ircc_start_interrupts(self);
+ netif_device_attach(self->netdev);
+ }
+ }
self->io.suspended = 0;
-
- IRDA_MESSAGE("%s, Waking up\n", driver_name);
+ rtnl_unlock();
}
return 0;
}
@@ -1682,9 +1741,6 @@
*/
static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
{
- int iobase;
- unsigned long flags;
-
IRDA_DEBUG(1, "%s\n", __FUNCTION__);
IRDA_ASSERT(self != NULL, return -1;);
@@ -1694,22 +1750,7 @@
/* Remove netdevice */
unregister_netdev(self->netdev);
- /* Make sure the irq handler is not exectuting */
- spin_lock_irqsave(&self->lock, flags);
-
- /* Stop interrupts */
- iobase = self->io.fir_base;
- register_bank(iobase, 0);
- outb(0, iobase + IRCC_IER);
- outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
- outb(0x00, iobase + IRCC_MASTER);
-#if 0
- /* Reset to SIR mode */
- register_bank(iobase, 1);
- outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase + IRCC_SCE_CFGA);
- outb(IRCC_CFGB_IR, iobase + IRCC_SCE_CFGB);
-#endif
- spin_unlock_irqrestore(&self->lock, flags);
+ smsc_ircc_stop_interrupts(self);
/* Release the PORTS that this driver is using */
IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index 15f2073..3961a75 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -678,10 +678,9 @@
return;
ticks = us / (1000000 / HZ);
- if (ticks > 0) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(1 + ticks);
- } else
+ if (ticks > 0)
+ schedule_timeout_interruptible(1 + ticks);
+ else
udelay(us);
}
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index 651c5a6..a9f49f0 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -473,8 +473,7 @@
rd_set_addr_status(rd, 0, 0);
if (busaddr)
pci_unmap_single(r->pdev, busaddr, r->len, r->dir);
- if (rd->buf)
- kfree(rd->buf);
+ kfree(rd->buf);
}
kfree(r);
return 0;
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 9d026ed..04e4718 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -645,11 +645,10 @@
mod_timer(&adapter->blink_timer, jiffies);
- set_current_state(TASK_INTERRUPTIBLE);
- if(data)
- schedule_timeout(data * HZ);
+ if (data)
+ schedule_timeout_interruptible(data * HZ);
else
- schedule_timeout(MAX_SCHEDULE_TIMEOUT);
+ schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
del_timer_sync(&adapter->blink_timer);
ixgb_led_off(&adapter->hw);
@@ -723,6 +722,7 @@
.phys_id = ixgb_phys_id,
.get_stats_count = ixgb_get_stats_count,
.get_ethtool_stats = ixgb_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
void ixgb_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 89d6d69..176680c 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -460,8 +460,9 @@
}
ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
+ memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
- if(!is_valid_ether_addr(netdev->dev_addr)) {
+ if(!is_valid_ether_addr(netdev->perm_addr)) {
err = -EIO;
goto err_eeprom;
}
diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index b4929be..1d75ca0 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -298,7 +298,7 @@
static unsigned char lance_need_isa_bounce_buffers = 1;
static int lance_open(struct net_device *dev);
-static void lance_init_ring(struct net_device *dev, int mode);
+static void lance_init_ring(struct net_device *dev, gfp_t mode);
static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev);
static int lance_rx(struct net_device *dev);
static irqreturn_t lance_interrupt(int irq, void *dev_id, struct pt_regs *regs);
@@ -846,7 +846,7 @@
/* Initialize the LANCE Rx and Tx rings. */
static void
-lance_init_ring(struct net_device *dev, int gfp)
+lance_init_ring(struct net_device *dev, gfp_t gfp)
{
struct lance_private *lp = dev->priv;
int i;
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index 41bad07..f7b7238 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -415,6 +415,10 @@
static int ticks_limit = 100;
static int max_cmd_backlog = TX_RING_SIZE-1;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void i596_poll_controller(struct net_device *dev);
+#endif
+
static inline void CA(struct net_device *dev)
{
@@ -636,11 +640,11 @@
disable_irq(dev->irq); /* disable IRQs from LAN */
DEB(DEB_INIT,
- printk("RESET 82596 port: %p (with IRQ %d disabled)\n",
- (void*)(dev->base_addr + PA_I82596_RESET),
+ printk("RESET 82596 port: %lx (with IRQ %d disabled)\n",
+ (dev->base_addr + PA_I82596_RESET),
dev->irq));
- gsc_writel(0, (void*)(dev->base_addr + PA_I82596_RESET)); /* Hard Reset */
+ gsc_writel(0, (dev->base_addr + PA_I82596_RESET)); /* Hard Reset */
udelay(100); /* Wait 100us - seems to help */
/* change the scp address */
@@ -1209,6 +1213,9 @@
dev->set_multicast_list = set_multicast_list;
dev->tx_timeout = i596_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = i596_poll_controller;
+#endif
dev->priv = (void *)(dev->mem_start);
@@ -1242,6 +1249,14 @@
return 0;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void i596_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ i596_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -1528,17 +1543,18 @@
if (!dev->irq) {
printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
- __FILE__, dev->hpa);
+ __FILE__, dev->hpa.start);
return -ENODEV;
}
- printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa, dev->irq);
+ printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start,
+ dev->irq);
netdevice = alloc_etherdev(0);
if (!netdevice)
return -ENOMEM;
- netdevice->base_addr = dev->hpa;
+ netdevice->base_addr = dev->hpa.start;
netdevice->irq = dev->irq;
retval = i82596_probe(netdevice, &dev->dev);
@@ -1566,7 +1582,7 @@
MODULE_DEVICE_TABLE(parisc, lan_tbl);
static struct parisc_driver lan_driver = {
- .name = "Apricot",
+ .name = "lasi_82596",
.id_table = lan_tbl,
.probe = lan_init_chip,
};
diff --git a/drivers/net/lne390.c b/drivers/net/lne390.c
index 27f0d8a..309d254 100644
--- a/drivers/net/lne390.c
+++ b/drivers/net/lne390.c
@@ -298,7 +298,7 @@
return 0;
unmap:
if (ei_status.reg0)
- iounmap((void *)dev->mem_start);
+ iounmap(ei_status.mem);
cleanup:
free_irq(dev->irq, dev);
return ret;
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index f2fc1f2..2a5add2 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -1036,10 +1036,8 @@
{
macio_unregister_driver(&mace_driver);
- if (dummy_buf) {
- kfree(dummy_buf);
- dummy_buf = NULL;
- }
+ kfree(dummy_buf);
+ dummy_buf = NULL;
}
MODULE_AUTHOR("Paul Mackerras");
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index c33cb3d..e42aa79 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -207,6 +207,20 @@
return 0;
}
+int mii_check_gmii_support(struct mii_if_info *mii)
+{
+ int reg;
+
+ reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+ if (reg & BMSR_ESTATEN) {
+ reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS);
+ if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
+ return 1;
+ }
+
+ return 0;
+}
+
int mii_link_ok (struct mii_if_info *mii)
{
/* first, a dummy read, needed to latch some MII phys */
@@ -394,5 +408,6 @@
EXPORT_SYMBOL(mii_ethtool_sset);
EXPORT_SYMBOL(mii_check_link);
EXPORT_SYMBOL(mii_check_media);
+EXPORT_SYMBOL(mii_check_gmii_support);
EXPORT_SYMBOL(generic_mii_ioctl);
diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
new file mode 100644
index 0000000..f79f7ee
--- /dev/null
+++ b/drivers/net/mipsnet.c
@@ -0,0 +1,371 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define DEBUG
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/netdevice.h>
+#include <asm/io.h>
+#include <asm/mips-boards/simint.h>
+
+#include "mipsnet.h" /* actual device IO mapping */
+
+#define MIPSNET_VERSION "2005-06-20"
+
+#define mipsnet_reg_address(dev, field) (dev->base_addr + field_offset(field))
+
+struct mipsnet_priv {
+ struct net_device_stats stats;
+};
+
+static struct platform_device *mips_plat_dev;
+
+static char mipsnet_string[] = "mipsnet";
+
+/*
+ * Copy data from the MIPSNET rx data port
+ */
+static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata,
+ int len)
+{
+ uint32_t available_len = inl(mipsnet_reg_address(dev, rxDataCount));
+ if (available_len < len)
+ return -EFAULT;
+
+ for (; len > 0; len--, kdata++) {
+ *kdata = inb(mipsnet_reg_address(dev, rxDataBuffer));
+ }
+
+ return inl(mipsnet_reg_address(dev, rxDataCount));
+}
+
+static inline ssize_t mipsnet_put_todevice(struct net_device *dev,
+ struct sk_buff *skb)
+{
+ int count_to_go = skb->len;
+ char *buf_ptr = skb->data;
+ struct mipsnet_priv *mp = netdev_priv(dev);
+
+ pr_debug("%s: %s(): telling MIPSNET txDataCount(%d)\n",
+ dev->name, __FUNCTION__, skb->len);
+
+ outl(skb->len, mipsnet_reg_address(dev, txDataCount));
+
+ pr_debug("%s: %s(): sending data to MIPSNET txDataBuffer(%d)\n",
+ dev->name, __FUNCTION__, skb->len);
+
+ for (; count_to_go; buf_ptr++, count_to_go--) {
+ outb(*buf_ptr, mipsnet_reg_address(dev, txDataBuffer));
+ }
+
+ mp->stats.tx_packets++;
+ mp->stats.tx_bytes += skb->len;
+
+ return skb->len;
+}
+
+static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ pr_debug("%s:%s(): transmitting %d bytes\n",
+ dev->name, __FUNCTION__, skb->len);
+
+ /* Only one packet at a time. Once TXDONE interrupt is serviced, the
+ * queue will be restarted.
+ */
+ netif_stop_queue(dev);
+ mipsnet_put_todevice(dev, skb);
+
+ return 0;
+}
+
+static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t count)
+{
+ struct sk_buff *skb;
+ size_t len = count;
+ struct mipsnet_priv *mp = netdev_priv(dev);
+
+ if (!(skb = alloc_skb(len + 2, GFP_KERNEL))) {
+ mp->stats.rx_dropped++;
+ return -ENOMEM;
+ }
+
+ skb_reserve(skb, 2);
+ if (ioiocpy_frommipsnet(dev, skb_put(skb, len), len))
+ return -EFAULT;
+
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ pr_debug("%s:%s(): pushing RXed data to kernel\n",
+ dev->name, __FUNCTION__);
+ netif_rx(skb);
+
+ mp->stats.rx_packets++;
+ mp->stats.rx_bytes += len;
+
+ return count;
+}
+
+static irqreturn_t
+mipsnet_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+
+ irqreturn_t retval = IRQ_NONE;
+ uint64_t interruptFlags;
+
+ if (irq == dev->irq) {
+ pr_debug("%s:%s(): irq %d for device\n",
+ dev->name, __FUNCTION__, irq);
+
+ retval = IRQ_HANDLED;
+
+ interruptFlags =
+ inl(mipsnet_reg_address(dev, interruptControl));
+ pr_debug("%s:%s(): intCtl=0x%016llx\n", dev->name,
+ __FUNCTION__, interruptFlags);
+
+ if (interruptFlags & MIPSNET_INTCTL_TXDONE) {
+ pr_debug("%s:%s(): got TXDone\n",
+ dev->name, __FUNCTION__);
+ outl(MIPSNET_INTCTL_TXDONE,
+ mipsnet_reg_address(dev, interruptControl));
+ // only one packet at a time, we are done.
+ netif_wake_queue(dev);
+ } else if (interruptFlags & MIPSNET_INTCTL_RXDONE) {
+ pr_debug("%s:%s(): got RX data\n",
+ dev->name, __FUNCTION__);
+ mipsnet_get_fromdev(dev,
+ inl(mipsnet_reg_address(dev, rxDataCount)));
+ pr_debug("%s:%s(): clearing RX int\n",
+ dev->name, __FUNCTION__);
+ outl(MIPSNET_INTCTL_RXDONE,
+ mipsnet_reg_address(dev, interruptControl));
+
+ } else if (interruptFlags & MIPSNET_INTCTL_TESTBIT) {
+ pr_debug("%s:%s(): got test interrupt\n",
+ dev->name, __FUNCTION__);
+ // TESTBIT is cleared on read.
+ // And takes effect after a write with 0
+ outl(0, mipsnet_reg_address(dev, interruptControl));
+ } else {
+ pr_debug("%s:%s(): no valid fags 0x%016llx\n",
+ dev->name, __FUNCTION__, interruptFlags);
+ // Maybe shared IRQ, just ignore, no clearing.
+ retval = IRQ_NONE;
+ }
+
+ } else {
+ printk(KERN_INFO "%s: %s(): irq %d for unknown device\n",
+ dev->name, __FUNCTION__, irq);
+ retval = IRQ_NONE;
+ }
+ return retval;
+} //mipsnet_interrupt()
+
+static int mipsnet_open(struct net_device *dev)
+{
+ int err;
+ pr_debug("%s: mipsnet_open\n", dev->name);
+
+ err = request_irq(dev->irq, &mipsnet_interrupt,
+ SA_SHIRQ, dev->name, (void *) dev);
+
+ if (err) {
+ pr_debug("%s: %s(): can't get irq %d\n",
+ dev->name, __FUNCTION__, dev->irq);
+ release_region(dev->base_addr, MIPSNET_IO_EXTENT);
+ return err;
+ }
+
+ pr_debug("%s: %s(): got IO region at 0x%04lx and irq %d for dev.\n",
+ dev->name, __FUNCTION__, dev->base_addr, dev->irq);
+
+
+ netif_start_queue(dev);
+
+ // test interrupt handler
+ outl(MIPSNET_INTCTL_TESTBIT,
+ mipsnet_reg_address(dev, interruptControl));
+
+
+ return 0;
+}
+
+static int mipsnet_close(struct net_device *dev)
+{
+ pr_debug("%s: %s()\n", dev->name, __FUNCTION__);
+ netif_stop_queue(dev);
+ return 0;
+}
+
+static struct net_device_stats *mipsnet_get_stats(struct net_device *dev)
+{
+ struct mipsnet_priv *mp = netdev_priv(dev);
+
+ return &mp->stats;
+}
+
+static void mipsnet_set_mclist(struct net_device *dev)
+{
+ // we don't do anything
+ return;
+}
+
+static int __init mipsnet_probe(struct device *dev)
+{
+ struct net_device *netdev;
+ int err;
+
+ netdev = alloc_etherdev(sizeof(struct mipsnet_priv));
+ if (!netdev) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ dev_set_drvdata(dev, netdev);
+
+ netdev->open = mipsnet_open;
+ netdev->stop = mipsnet_close;
+ netdev->hard_start_xmit = mipsnet_xmit;
+ netdev->get_stats = mipsnet_get_stats;
+ netdev->set_multicast_list = mipsnet_set_mclist;
+
+ /*
+ * TODO: probe for these or load them from PARAM
+ */
+ netdev->base_addr = 0x4200;
+ netdev->irq = MIPSCPU_INT_BASE + MIPSCPU_INT_MB0 +
+ inl(mipsnet_reg_address(netdev, interruptInfo));
+
+ // Get the io region now, get irq on open()
+ if (!request_region(netdev->base_addr, MIPSNET_IO_EXTENT, "mipsnet")) {
+ pr_debug("%s: %s(): IO region {start: 0x%04lux, len: %d} "
+ "for dev is not availble.\n", netdev->name,
+ __FUNCTION__, netdev->base_addr, MIPSNET_IO_EXTENT);
+ err = -EBUSY;
+ goto out_free_netdev;
+ }
+
+ /*
+ * Lacking any better mechanism to allocate a MAC address we use a
+ * random one ...
+ */
+ random_ether_addr(netdev->dev_addr);
+
+ err = register_netdev(netdev);
+ if (err) {
+ printk(KERN_ERR "MIPSNet: failed to register netdev.\n");
+ goto out_free_region;
+ }
+
+ return 0;
+
+out_free_region:
+ release_region(netdev->base_addr, MIPSNET_IO_EXTENT);
+
+out_free_netdev:
+ free_netdev(netdev);
+
+out:
+ return err;
+}
+
+static int __devexit mipsnet_device_remove(struct device *device)
+{
+ struct net_device *dev = dev_get_drvdata(device);
+
+ unregister_netdev(dev);
+ release_region(dev->base_addr, MIPSNET_IO_EXTENT);
+ free_netdev(dev);
+ dev_set_drvdata(device, NULL);
+
+ return 0;
+}
+
+static struct device_driver mipsnet_driver = {
+ .name = mipsnet_string,
+ .bus = &platform_bus_type,
+ .probe = mipsnet_probe,
+ .remove = __devexit_p(mipsnet_device_remove),
+};
+
+static void mipsnet_platform_release(struct device *device)
+{
+ struct platform_device *pldev;
+
+ /* free device */
+ pldev = to_platform_device(device);
+ kfree(pldev);
+}
+
+static int __init mipsnet_init_module(void)
+{
+ struct platform_device *pldev;
+ int err;
+
+ printk(KERN_INFO "MIPSNet Ethernet driver. Version: %s. "
+ "(c)2005 MIPS Technologies, Inc.\n", MIPSNET_VERSION);
+
+ if (driver_register(&mipsnet_driver)) {
+ printk(KERN_ERR "Driver registration failed\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto out_unregister_driver;
+ }
+
+ memset (pldev, 0, sizeof (*pldev));
+ pldev->name = mipsnet_string;
+ pldev->id = 0;
+ pldev->dev.release = mipsnet_platform_release;
+
+ if (platform_device_register(pldev)) {
+ err = -ENODEV;
+ goto out_free_pldev;
+ }
+
+ if (!pldev->dev.driver) {
+ /*
+ * The driver was not bound to this device, there was
+ * no hardware at this address. Unregister it, as the
+ * release fuction will take care of freeing the
+ * allocated structure
+ */
+ platform_device_unregister (pldev);
+ }
+
+ mips_plat_dev = pldev;
+
+ return 0;
+
+out_free_pldev:
+ kfree(pldev);
+
+out_unregister_driver:
+ driver_unregister(&mipsnet_driver);
+out:
+ return err;
+}
+
+static void __exit mipsnet_exit_module(void)
+{
+ pr_debug("MIPSNet Ethernet driver exiting\n");
+
+ driver_unregister(&mipsnet_driver);
+}
+
+module_init(mipsnet_init_module);
+module_exit(mipsnet_exit_module);
diff --git a/drivers/net/mipsnet.h b/drivers/net/mipsnet.h
new file mode 100644
index 0000000..8785359
--- /dev/null
+++ b/drivers/net/mipsnet.h
@@ -0,0 +1,127 @@
+//
+// <COPYRIGHT CLASS="1B" YEAR="2005">
+// Unpublished work (c) MIPS Technologies, Inc. All rights reserved.
+// Unpublished rights reserved under the copyright laws of the U.S.A. and
+// other countries.
+//
+// PROPRIETARY / SECRET CONFIDENTIAL INFORMATION OF MIPS TECHNOLOGIES, INC.
+// FOR INTERNAL USE ONLY.
+//
+// Under no circumstances (contract or otherwise) may this information be
+// disclosed to, or copied, modified or used by anyone other than employees
+// or contractors of MIPS Technologies having a need to know.
+// </COPYRIGHT>
+//
+//++
+// File: MIPS_Net.h
+//
+// Description:
+// The definition of the emulated MIPSNET device's interface.
+//
+// Notes: This include file needs to work from a Linux device drivers.
+//
+//--
+//
+
+#ifndef __MIPSNET_H
+#define __MIPSNET_H
+
+/*
+ * Id of this Net device, as seen by the core.
+ */
+#define MIPS_NET_DEV_ID ((uint64_t) \
+ ((uint64_t)'M'<< 0)| \
+ ((uint64_t)'I'<< 8)| \
+ ((uint64_t)'P'<<16)| \
+ ((uint64_t)'S'<<24)| \
+ ((uint64_t)'N'<<32)| \
+ ((uint64_t)'E'<<40)| \
+ ((uint64_t)'T'<<48)| \
+ ((uint64_t)'0'<<56))
+
+/*
+ * Net status/control block as seen by sw in the core.
+ * (Why not use bit fields? can't be bothered with cross-platform struct
+ * packing.)
+ */
+typedef struct _net_control_block {
+ /// dev info for probing
+ /// reads as MIPSNET%d where %d is some form of version
+ uint64_t devId; /*0x00 */
+
+ /*
+ * read only busy flag.
+ * Set and cleared by the Net Device to indicate that an rx or a tx
+ * is in progress.
+ */
+ uint32_t busy; /*0x08 */
+
+ /*
+ * Set by the Net Device.
+ * The device will set it once data has been received.
+ * The value is the number of bytes that should be read from
+ * rxDataBuffer. The value will decrease till 0 until all the data
+ * from rxDataBuffer has been read.
+ */
+ uint32_t rxDataCount; /*0x0c */
+#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16)
+
+ /*
+ * Settable from the MIPS core, cleared by the Net Device.
+ * The core should set the number of bytes it wants to send,
+ * then it should write those bytes of data to txDataBuffer.
+ * The device will clear txDataCount has been processed (not necessarily sent).
+ */
+ uint32_t txDataCount; /*0x10 */
+
+ /*
+ * Interrupt control
+ *
+ * Used to clear the interrupted generated by this dev.
+ * Write a 1 to clear the interrupt. (except bit31).
+ *
+ * Bit0 is set if it was a tx-done interrupt.
+ * Bit1 is set when new rx-data is available.
+ * Until this bit is cleared there will be no other RXs.
+ *
+ * Bit31 is used for testing, it clears after a read.
+ * Writing 1 to this bit will cause an interrupt to be generated.
+ * To clear the test interrupt, write 0 to this register.
+ */
+ uint32_t interruptControl; /*0x14 */
+#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0))
+#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1))
+#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31))
+#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT)
+
+ /*
+ * Readonly core-specific interrupt info for the device to signal the core.
+ * The meaning of the contents of this field might change.
+ */
+ /*###\todo: the whole memIntf interrupt scheme is messy: the device should have
+ * no control what so ever of what VPE/register set is being used.
+ * The MemIntf should only expose interrupt lines, and something in the
+ * config should be responsible for the line<->core/vpe bindings.
+ */
+ uint32_t interruptInfo; /*0x18 */
+
+ /*
+ * This is where the received data is read out.
+ * There is more data to read until rxDataReady is 0.
+ * Only 1 byte at this regs offset is used.
+ */
+ uint32_t rxDataBuffer; /*0x1c */
+
+ /*
+ * This is where the data to transmit is written.
+ * Data should be written for the amount specified in the txDataCount register.
+ * Only 1 byte at this regs offset is used.
+ */
+ uint32_t txDataBuffer; /*0x20 */
+} MIPS_T_NetControl;
+
+#define MIPSNET_IO_EXTENT 0x40 /* being generous */
+
+#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field)
+
+#endif /* __MIPSNET_H */
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index f0996ce..6c86dca 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -277,7 +277,7 @@
struct recvq __iomem *rq = mp->rq;
struct myri_rxd __iomem *rxd = &rq->myri_rxd[0];
struct net_device *dev = mp->dev;
- int gfp_flags = GFP_KERNEL;
+ gfp_t gfp_flags = GFP_KERNEL;
int i;
if (from_irq || in_interrupt())
diff --git a/drivers/net/myri_sbus.h b/drivers/net/myri_sbus.h
index 9391e55..47722f7 100644
--- a/drivers/net/myri_sbus.h
+++ b/drivers/net/myri_sbus.h
@@ -296,7 +296,7 @@
/* We use this to acquire receive skb's that we can DMA directly into. */
#define ALIGNED_RX_SKB_ADDR(addr) \
((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr))
-static inline struct sk_buff *myri_alloc_skb(unsigned int length, int gfp_flags)
+static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags)
{
struct sk_buff *skb;
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index d209a15..0de8fdd 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -54,6 +54,10 @@
#include <asm/system.h>
#include <asm/io.h>
+#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#include <asm/tx4938/rbtx4938.h>
+#endif
+
#include "8390.h"
#define DRV_NAME "ne"
@@ -111,6 +115,9 @@
{"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */
{"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
{"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
+#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+ {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */
+#endif
{"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
{NULL,}
};
@@ -226,6 +233,10 @@
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
+#ifdef CONFIG_TOSHIBA_RBTX4938
+ dev->base_addr = 0x07f20280;
+ dev->irq = RBTX4938_RTL_8019_IRQ;
+#endif
err = do_ne_probe(dev);
if (err)
goto out;
@@ -506,6 +517,10 @@
ei_status.name = name;
ei_status.tx_start_page = start_page;
ei_status.stop_page = stop_page;
+#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+ wordlength = 1;
+#endif
+
#ifdef CONFIG_PLAT_OAKS32R
ei_status.word16 = 0;
#else
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index f1c01ac..d11821d 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -372,6 +372,7 @@
printk("%2.2X%s", SA_prom[i], i == 5 ? ".\n": ":");
dev->dev_addr[i] = SA_prom[i];
}
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
return 0;
@@ -637,6 +638,7 @@
.get_drvinfo = ne2k_pci_get_drvinfo,
.get_tx_csum = ethtool_op_get_tx_csum,
.get_sg = ethtool_op_get_sg,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static void __devexit ne2k_pci_remove_one (struct pci_dev *pdev)
@@ -673,7 +675,6 @@
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
pci_enable_device(pdev);
- pci_set_master(pdev);
NS8390_init(dev, 1);
netif_device_attach(dev);
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index 925d1df..bb42ff2 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -696,8 +696,7 @@
return;
for(i=0;i<TMDNUM;i++) {
- if(p->tmdbounce[i])
- kfree(p->tmdbounce[i]);
+ kfree(p->tmdbounce[i]);
#ifdef XMT_VIA_SKB
if(p->tmd_skb[i])
dev_kfree_skb(p->tmd_skb[i]);
@@ -710,12 +709,10 @@
if(p->recv_skb[i])
dev_kfree_skb(p->recv_skb[i]);
#else
- if(p->recvbounce[i])
- kfree(p->recvbounce[i]);
+ kfree(p->recvbounce[i]);
#endif
}
- if(p->self)
- kfree(p->self);
+ kfree(p->self);
}
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index e4811b4..a3c3fc9 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1632,8 +1632,7 @@
timed_out = 1;
break;
}
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
}
if (status & fail)
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 9f22d138..818c185 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1020,6 +1020,12 @@
} else {
outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
}
+ } else if (info->flags & IS_DL10019) {
+ /* Advertise 100F, 100H, 10F, 10H */
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
+ /* Restart MII autonegotiation */
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
}
}
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 113b680..70fe81a 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -22,8 +22,8 @@
*************************************************************************/
#define DRV_NAME "pcnet32"
-#define DRV_VERSION "1.30j"
-#define DRV_RELDATE "29.04.2005"
+#define DRV_VERSION "1.31a"
+#define DRV_RELDATE "12.Sep.2005"
#define PFX DRV_NAME ": "
static const char *version =
@@ -257,6 +257,9 @@
* v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32.
* v1.30i 28 Jun 2004 Don Fry change to use module_param.
* v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test.
+ * v1.31 02 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> added set_ringparam().
+ * v1.31a 12 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> set min ring size to 4
+ * to allow loopback test to work unchanged.
*/
@@ -266,17 +269,17 @@
* That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
*/
#ifndef PCNET32_LOG_TX_BUFFERS
-#define PCNET32_LOG_TX_BUFFERS 4
-#define PCNET32_LOG_RX_BUFFERS 5
+#define PCNET32_LOG_TX_BUFFERS 4
+#define PCNET32_LOG_RX_BUFFERS 5
+#define PCNET32_LOG_MAX_TX_BUFFERS 9 /* 2^9 == 512 */
+#define PCNET32_LOG_MAX_RX_BUFFERS 9
#endif
#define TX_RING_SIZE (1 << (PCNET32_LOG_TX_BUFFERS))
-#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
-#define TX_RING_LEN_BITS ((PCNET32_LOG_TX_BUFFERS) << 12)
+#define TX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_TX_BUFFERS))
#define RX_RING_SIZE (1 << (PCNET32_LOG_RX_BUFFERS))
-#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
-#define RX_RING_LEN_BITS ((PCNET32_LOG_RX_BUFFERS) << 4)
+#define RX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_RX_BUFFERS))
#define PKT_BUF_SZ 1544
@@ -334,14 +337,14 @@
};
/*
- * The first three fields of pcnet32_private are read by the ethernet device
- * so we allocate the structure should be allocated by pci_alloc_consistent().
+ * The first field of pcnet32_private is read by the ethernet device
+ * so the structure should be allocated using pci_alloc_consistent().
*/
struct pcnet32_private {
- /* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */
- struct pcnet32_rx_head rx_ring[RX_RING_SIZE];
- struct pcnet32_tx_head tx_ring[TX_RING_SIZE];
struct pcnet32_init_block init_block;
+ /* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */
+ struct pcnet32_rx_head *rx_ring;
+ struct pcnet32_tx_head *tx_ring;
dma_addr_t dma_addr; /* DMA address of beginning of this
object, returned by
pci_alloc_consistent */
@@ -349,13 +352,21 @@
structure */
const char *name;
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
- struct sk_buff *tx_skbuff[TX_RING_SIZE];
- struct sk_buff *rx_skbuff[RX_RING_SIZE];
- dma_addr_t tx_dma_addr[TX_RING_SIZE];
- dma_addr_t rx_dma_addr[RX_RING_SIZE];
+ struct sk_buff **tx_skbuff;
+ struct sk_buff **rx_skbuff;
+ dma_addr_t *tx_dma_addr;
+ dma_addr_t *rx_dma_addr;
struct pcnet32_access a;
spinlock_t lock; /* Guard lock */
unsigned int cur_rx, cur_tx; /* The next free ring entry */
+ unsigned int rx_ring_size; /* current rx ring size */
+ unsigned int tx_ring_size; /* current tx ring size */
+ unsigned int rx_mod_mask; /* rx ring modular mask */
+ unsigned int tx_mod_mask; /* tx ring modular mask */
+ unsigned short rx_len_bits;
+ unsigned short tx_len_bits;
+ dma_addr_t rx_ring_dma_addr;
+ dma_addr_t tx_ring_dma_addr;
unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
struct net_device_stats stats;
char tx_full;
@@ -397,6 +408,9 @@
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
static void pcnet32_purge_tx_ring(struct net_device *dev);
+static int pcnet32_alloc_ring(struct net_device *dev);
+static void pcnet32_free_ring(struct net_device *dev);
+
enum pci_flags_bit {
PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
@@ -613,10 +627,62 @@
{
struct pcnet32_private *lp = dev->priv;
- ering->tx_max_pending = TX_RING_SIZE - 1;
- ering->tx_pending = lp->cur_tx - lp->dirty_tx;
- ering->rx_max_pending = RX_RING_SIZE - 1;
- ering->rx_pending = lp->cur_rx & RX_RING_MOD_MASK;
+ ering->tx_max_pending = TX_MAX_RING_SIZE - 1;
+ ering->tx_pending = lp->tx_ring_size - 1;
+ ering->rx_max_pending = RX_MAX_RING_SIZE - 1;
+ ering->rx_pending = lp->rx_ring_size - 1;
+}
+
+static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
+{
+ struct pcnet32_private *lp = dev->priv;
+ unsigned long flags;
+ int i;
+
+ if (ering->rx_mini_pending || ering->rx_jumbo_pending)
+ return -EINVAL;
+
+ if (netif_running(dev))
+ pcnet32_close(dev);
+
+ spin_lock_irqsave(&lp->lock, flags);
+ pcnet32_free_ring(dev);
+ lp->tx_ring_size = min(ering->tx_pending, (unsigned int) TX_MAX_RING_SIZE);
+ lp->rx_ring_size = min(ering->rx_pending, (unsigned int) RX_MAX_RING_SIZE);
+
+ /* set the minimum ring size to 4, to allow the loopback test to work
+ * unchanged.
+ */
+ for (i = 2; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) {
+ if (lp->tx_ring_size <= (1 << i))
+ break;
+ }
+ lp->tx_ring_size = (1 << i);
+ lp->tx_mod_mask = lp->tx_ring_size - 1;
+ lp->tx_len_bits = (i << 12);
+
+ for (i = 2; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) {
+ if (lp->rx_ring_size <= (1 << i))
+ break;
+ }
+ lp->rx_ring_size = (1 << i);
+ lp->rx_mod_mask = lp->rx_ring_size - 1;
+ lp->rx_len_bits = (i << 4);
+
+ if (pcnet32_alloc_ring(dev)) {
+ pcnet32_free_ring(dev);
+ return -ENOMEM;
+ }
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ if (pcnet32_debug & NETIF_MSG_DRV)
+ printk(KERN_INFO PFX "Ring Param Settings: RX: %d, TX: %d\n", lp->rx_ring_size, lp->tx_ring_size);
+
+ if (netif_running(dev))
+ pcnet32_open(dev);
+
+ return 0;
}
static void pcnet32_get_strings(struct net_device *dev, u32 stringset, u8 *data)
@@ -948,6 +1014,7 @@
.nway_reset = pcnet32_nway_reset,
.get_link = pcnet32_get_link,
.get_ringparam = pcnet32_get_ringparam,
+ .set_ringparam = pcnet32_set_ringparam,
.get_tx_csum = ethtool_op_get_tx_csum,
.get_sg = ethtool_op_get_sg,
.get_tso = ethtool_op_get_tso,
@@ -957,6 +1024,7 @@
.phys_id = pcnet32_phys_id,
.get_regs_len = pcnet32_get_regs_len,
.get_regs = pcnet32_get_regs,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
/* only probes for non-PCI devices, the rest are handled by
@@ -1185,9 +1253,10 @@
memcpy(dev->dev_addr, promaddr, 6);
}
}
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
/* if the ethernet address is not valid, force to 00:00:00:00:00:00 */
- if (!is_valid_ether_addr(dev->dev_addr))
+ if (!is_valid_ether_addr(dev->perm_addr))
memset(dev->dev_addr, 0, sizeof(dev->dev_addr));
if (pcnet32_debug & NETIF_MSG_PROBE) {
@@ -1239,6 +1308,12 @@
dev->priv = lp;
lp->name = chipname;
lp->shared_irq = shared;
+ lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */
+ lp->rx_ring_size = RX_RING_SIZE; /* default rx ring size */
+ lp->tx_mod_mask = lp->tx_ring_size - 1;
+ lp->rx_mod_mask = lp->rx_ring_size - 1;
+ lp->tx_len_bits = (PCNET32_LOG_TX_BUFFERS << 12);
+ lp->rx_len_bits = (PCNET32_LOG_RX_BUFFERS << 4);
lp->mii_if.full_duplex = fdx;
lp->mii_if.phy_id_mask = 0x1f;
lp->mii_if.reg_num_mask = 0x1f;
@@ -1265,21 +1340,23 @@
}
lp->a = *a;
+ if (pcnet32_alloc_ring(dev)) {
+ ret = -ENOMEM;
+ goto err_free_ring;
+ }
/* detect special T1/E1 WAN card by checking for MAC address */
if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0
&& dev->dev_addr[2] == 0x75)
lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI;
lp->init_block.mode = le16_to_cpu(0x0003); /* Disable Rx and Tx. */
- lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
+ lp->init_block.tlen_rlen = le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits);
for (i = 0; i < 6; i++)
lp->init_block.phys_addr[i] = dev->dev_addr[i];
lp->init_block.filter[0] = 0x00000000;
lp->init_block.filter[1] = 0x00000000;
- lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr +
- offsetof(struct pcnet32_private, rx_ring));
- lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr +
- offsetof(struct pcnet32_private, tx_ring));
+ lp->init_block.rx_ring = (u32)le32_to_cpu(lp->rx_ring_dma_addr);
+ lp->init_block.tx_ring = (u32)le32_to_cpu(lp->tx_ring_dma_addr);
/* switch pcnet32 to 32bit mode */
a->write_bcr(ioaddr, 20, 2);
@@ -1310,7 +1387,7 @@
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(", failed to detect IRQ line.\n");
ret = -ENODEV;
- goto err_free_consistent;
+ goto err_free_ring;
}
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(", probed IRQ %d.\n", dev->irq);
@@ -1341,7 +1418,7 @@
/* Fill in the generic fields of the device structure. */
if (register_netdev(dev))
- goto err_free_consistent;
+ goto err_free_ring;
if (pdev) {
pci_set_drvdata(pdev, dev);
@@ -1359,6 +1436,8 @@
return 0;
+err_free_ring:
+ pcnet32_free_ring(dev);
err_free_consistent:
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
err_free_netdev:
@@ -1369,6 +1448,86 @@
}
+static int pcnet32_alloc_ring(struct net_device *dev)
+{
+ struct pcnet32_private *lp = dev->priv;
+
+ if ((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size,
+ &lp->tx_ring_dma_addr)) == NULL) {
+ if (pcnet32_debug & NETIF_MSG_DRV)
+ printk(KERN_ERR PFX "Consistent memory allocation failed.\n");
+ return -ENOMEM;
+ }
+
+ if ((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size,
+ &lp->rx_ring_dma_addr)) == NULL) {
+ if (pcnet32_debug & NETIF_MSG_DRV)
+ printk(KERN_ERR PFX "Consistent memory allocation failed.\n");
+ return -ENOMEM;
+ }
+
+ if (!(lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, GFP_ATOMIC))) {
+ if (pcnet32_debug & NETIF_MSG_DRV)
+ printk(KERN_ERR PFX "Memory allocation failed.\n");
+ return -ENOMEM;
+ }
+ memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size);
+
+ if (!(lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, GFP_ATOMIC))) {
+ if (pcnet32_debug & NETIF_MSG_DRV)
+ printk(KERN_ERR PFX "Memory allocation failed.\n");
+ return -ENOMEM;
+ }
+ memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size);
+
+ if (!(lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, GFP_ATOMIC))) {
+ if (pcnet32_debug & NETIF_MSG_DRV)
+ printk(KERN_ERR PFX "Memory allocation failed.\n");
+ return -ENOMEM;
+ }
+ memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size);
+
+ if (!(lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, GFP_ATOMIC))) {
+ if (pcnet32_debug & NETIF_MSG_DRV)
+ printk(KERN_ERR PFX "Memory allocation failed.\n");
+ return -ENOMEM;
+ }
+ memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size);
+
+ return 0;
+}
+
+
+static void pcnet32_free_ring(struct net_device *dev)
+{
+ struct pcnet32_private *lp = dev->priv;
+
+ kfree(lp->tx_skbuff);
+ lp->tx_skbuff = NULL;
+
+ kfree(lp->rx_skbuff);
+ lp->rx_skbuff = NULL;
+
+ kfree(lp->tx_dma_addr);
+ lp->tx_dma_addr = NULL;
+
+ kfree(lp->rx_dma_addr);
+ lp->rx_dma_addr = NULL;
+
+ if (lp->tx_ring) {
+ pci_free_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size,
+ lp->tx_ring, lp->tx_ring_dma_addr);
+ lp->tx_ring = NULL;
+ }
+
+ if (lp->rx_ring) {
+ pci_free_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size,
+ lp->rx_ring, lp->rx_ring_dma_addr);
+ lp->rx_ring = NULL;
+ }
+}
+
+
static int
pcnet32_open(struct net_device *dev)
{
@@ -1400,8 +1559,8 @@
if (netif_msg_ifup(lp))
printk(KERN_DEBUG "%s: pcnet32_open() irq %d tx/rx rings %#x/%#x init %#x.\n",
dev->name, dev->irq,
- (u32) (lp->dma_addr + offsetof(struct pcnet32_private, tx_ring)),
- (u32) (lp->dma_addr + offsetof(struct pcnet32_private, rx_ring)),
+ (u32) (lp->tx_ring_dma_addr),
+ (u32) (lp->rx_ring_dma_addr),
(u32) (lp->dma_addr + offsetof(struct pcnet32_private, init_block)));
/* set/reset autoselect bit */
@@ -1521,7 +1680,7 @@
err_free_ring:
/* free any allocated skbuffs */
- for (i = 0; i < RX_RING_SIZE; i++) {
+ for (i = 0; i < lp->rx_ring_size; i++) {
lp->rx_ring[i].status = 0;
if (lp->rx_skbuff[i]) {
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2,
@@ -1531,6 +1690,9 @@
lp->rx_skbuff[i] = NULL;
lp->rx_dma_addr[i] = 0;
}
+
+ pcnet32_free_ring(dev);
+
/*
* Switch back to 16bit mode to avoid problems with dumb
* DOS packet driver after a warm reboot
@@ -1562,7 +1724,7 @@
struct pcnet32_private *lp = dev->priv;
int i;
- for (i = 0; i < TX_RING_SIZE; i++) {
+ for (i = 0; i < lp->tx_ring_size; i++) {
lp->tx_ring[i].status = 0; /* CPU owns buffer */
wmb(); /* Make sure adapter sees owner change */
if (lp->tx_skbuff[i]) {
@@ -1587,7 +1749,7 @@
lp->cur_rx = lp->cur_tx = 0;
lp->dirty_rx = lp->dirty_tx = 0;
- for (i = 0; i < RX_RING_SIZE; i++) {
+ for (i = 0; i < lp->rx_ring_size; i++) {
struct sk_buff *rx_skbuff = lp->rx_skbuff[i];
if (rx_skbuff == NULL) {
if (!(rx_skbuff = lp->rx_skbuff[i] = dev_alloc_skb (PKT_BUF_SZ))) {
@@ -1611,20 +1773,18 @@
}
/* The Tx buffer address is filled in as needed, but we do need to clear
* the upper ownership bit. */
- for (i = 0; i < TX_RING_SIZE; i++) {
+ for (i = 0; i < lp->tx_ring_size; i++) {
lp->tx_ring[i].status = 0; /* CPU owns buffer */
wmb(); /* Make sure adapter sees owner change */
lp->tx_ring[i].base = 0;
lp->tx_dma_addr[i] = 0;
}
- lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
+ lp->init_block.tlen_rlen = le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits);
for (i = 0; i < 6; i++)
lp->init_block.phys_addr[i] = dev->dev_addr[i];
- lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr +
- offsetof(struct pcnet32_private, rx_ring));
- lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr +
- offsetof(struct pcnet32_private, tx_ring));
+ lp->init_block.rx_ring = (u32)le32_to_cpu(lp->rx_ring_dma_addr);
+ lp->init_block.tx_ring = (u32)le32_to_cpu(lp->tx_ring_dma_addr);
wmb(); /* Make sure all changes are visible */
return 0;
}
@@ -1682,13 +1842,13 @@
printk(KERN_DEBUG " Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.",
lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "",
lp->cur_rx);
- for (i = 0 ; i < RX_RING_SIZE; i++)
+ for (i = 0 ; i < lp->rx_ring_size; i++)
printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ",
le32_to_cpu(lp->rx_ring[i].base),
(-le16_to_cpu(lp->rx_ring[i].buf_length)) & 0xffff,
le32_to_cpu(lp->rx_ring[i].msg_length),
le16_to_cpu(lp->rx_ring[i].status));
- for (i = 0 ; i < TX_RING_SIZE; i++)
+ for (i = 0 ; i < lp->tx_ring_size; i++)
printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ",
le32_to_cpu(lp->tx_ring[i].base),
(-le16_to_cpu(lp->tx_ring[i].length)) & 0xffff,
@@ -1729,7 +1889,7 @@
/* Fill in a Tx ring entry */
/* Mask to ring buffer boundary. */
- entry = lp->cur_tx & TX_RING_MOD_MASK;
+ entry = lp->cur_tx & lp->tx_mod_mask;
/* Caution: the write order is important here, set the status
* with the "ownership" bits last. */
@@ -1753,7 +1913,7 @@
dev->trans_start = jiffies;
- if (lp->tx_ring[(entry+1) & TX_RING_MOD_MASK].base != 0) {
+ if (lp->tx_ring[(entry+1) & lp->tx_mod_mask].base != 0) {
lp->tx_full = 1;
netif_stop_queue(dev);
}
@@ -1806,7 +1966,7 @@
int delta;
while (dirty_tx != lp->cur_tx) {
- int entry = dirty_tx & TX_RING_MOD_MASK;
+ int entry = dirty_tx & lp->tx_mod_mask;
int status = (short)le16_to_cpu(lp->tx_ring[entry].status);
if (status < 0)
@@ -1864,18 +2024,18 @@
dirty_tx++;
}
- delta = (lp->cur_tx - dirty_tx) & (TX_RING_MOD_MASK + TX_RING_SIZE);
- if (delta > TX_RING_SIZE) {
+ delta = (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask + lp->tx_ring_size);
+ if (delta > lp->tx_ring_size) {
if (netif_msg_drv(lp))
printk(KERN_ERR "%s: out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
dev->name, dirty_tx, lp->cur_tx, lp->tx_full);
- dirty_tx += TX_RING_SIZE;
- delta -= TX_RING_SIZE;
+ dirty_tx += lp->tx_ring_size;
+ delta -= lp->tx_ring_size;
}
if (lp->tx_full &&
netif_queue_stopped(dev) &&
- delta < TX_RING_SIZE - 2) {
+ delta < lp->tx_ring_size - 2) {
/* The ring is no longer full, clear tbusy. */
lp->tx_full = 0;
netif_wake_queue (dev);
@@ -1932,8 +2092,8 @@
pcnet32_rx(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
- int entry = lp->cur_rx & RX_RING_MOD_MASK;
- int boguscnt = RX_RING_SIZE / 2;
+ int entry = lp->cur_rx & lp->rx_mod_mask;
+ int boguscnt = lp->rx_ring_size / 2;
/* If we own the next entry, it's a new packet. Send it up. */
while ((short)le16_to_cpu(lp->rx_ring[entry].status) >= 0) {
@@ -1998,12 +2158,12 @@
if (netif_msg_drv(lp))
printk(KERN_ERR "%s: Memory squeeze, deferring packet.\n",
dev->name);
- for (i = 0; i < RX_RING_SIZE; i++)
+ for (i = 0; i < lp->rx_ring_size; i++)
if ((short)le16_to_cpu(lp->rx_ring[(entry+i)
- & RX_RING_MOD_MASK].status) < 0)
+ & lp->rx_mod_mask].status) < 0)
break;
- if (i > RX_RING_SIZE -2) {
+ if (i > lp->rx_ring_size -2) {
lp->stats.rx_dropped++;
lp->rx_ring[entry].status |= le16_to_cpu(0x8000);
wmb(); /* Make sure adapter sees owner change */
@@ -2041,7 +2201,7 @@
lp->rx_ring[entry].buf_length = le16_to_cpu(2-PKT_BUF_SZ);
wmb(); /* Make sure owner changes after all others are visible */
lp->rx_ring[entry].status |= le16_to_cpu(0x8000);
- entry = (++lp->cur_rx) & RX_RING_MOD_MASK;
+ entry = (++lp->cur_rx) & lp->rx_mod_mask;
if (--boguscnt <= 0) break; /* don't stay in loop forever */
}
@@ -2084,7 +2244,7 @@
spin_lock_irqsave(&lp->lock, flags);
/* free all allocated skbuffs */
- for (i = 0; i < RX_RING_SIZE; i++) {
+ for (i = 0; i < lp->rx_ring_size; i++) {
lp->rx_ring[i].status = 0;
wmb(); /* Make sure adapter sees owner change */
if (lp->rx_skbuff[i]) {
@@ -2096,7 +2256,7 @@
lp->rx_dma_addr[i] = 0;
}
- for (i = 0; i < TX_RING_SIZE; i++) {
+ for (i = 0; i < lp->tx_ring_size; i++) {
lp->tx_ring[i].status = 0; /* CPU owns buffer */
wmb(); /* Make sure adapter sees owner change */
if (lp->tx_skbuff[i]) {
@@ -2265,6 +2425,7 @@
struct pcnet32_private *lp = dev->priv;
unregister_netdev(dev);
+ pcnet32_free_ring(dev);
release_region(dev->base_addr, PCNET32_TOTAL_SIZE);
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
free_netdev(dev);
@@ -2340,6 +2501,7 @@
struct pcnet32_private *lp = pcnet32_dev->priv;
next_dev = lp->next;
unregister_netdev(pcnet32_dev);
+ pcnet32_free_ring(pcnet32_dev);
release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE);
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
free_netdev(pcnet32_dev);
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 14f4de1..c782a63 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -12,14 +12,6 @@
devices. This option provides infrastructure for
managing PHY devices.
-config PHYCONTROL
- bool " Support for automatically handling PHY state changes"
- depends on PHYLIB
- help
- Adds code to perform all the work for keeping PHY link
- state (speed/duplex/etc) up-to-date. Also handles
- interrupts.
-
comment "MII PHY device drivers"
depends on PHYLIB
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 9063067..ad93b0d 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -133,13 +133,9 @@
int ret = 0;
struct device_driver *drv = dev->driver;
- if (drv && drv->suspend) {
- ret = drv->suspend(dev, state, SUSPEND_DISABLE);
- if (ret == 0)
- ret = drv->suspend(dev, state, SUSPEND_SAVE_STATE);
- if (ret == 0)
- ret = drv->suspend(dev, state, SUSPEND_POWER_DOWN);
- }
+ if (drv && drv->suspend)
+ ret = drv->suspend(dev, state);
+
return ret;
}
@@ -148,13 +144,9 @@
int ret = 0;
struct device_driver *drv = dev->driver;
- if (drv && drv->resume) {
- ret = drv->resume(dev, RESUME_POWER_ON);
- if (ret == 0)
- ret = drv->resume(dev, RESUME_RESTORE_STATE);
- if (ret == 0)
- ret = drv->resume(dev, RESUME_ENABLE);
- }
+ if (drv && drv->resume)
+ ret = drv->resume(dev);
+
return ret;
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d9e11f9..9209da9 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -242,10 +242,6 @@
* choose the next best ones from the ones selected, so we don't
* care if ethtool tries to give us bad values
*
- * A note about the PHYCONTROL Layer. If you turn off
- * CONFIG_PHYCONTROL, you will need to read the PHY status
- * registers after this function completes, and update your
- * controller manually.
*/
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
{
@@ -380,7 +376,6 @@
err = phydev->drv->config_aneg(phydev);
-#ifdef CONFIG_PHYCONTROL
if (err < 0)
goto out_unlock;
@@ -395,14 +390,12 @@
}
out_unlock:
-#endif
spin_unlock(&phydev->lock);
return err;
}
EXPORT_SYMBOL(phy_start_aneg);
-#ifdef CONFIG_PHYCONTROL
static void phy_change(void *data);
static void phy_timer(unsigned long data);
@@ -868,4 +861,3 @@
mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
}
-#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 33f7bdb..6da1aa0 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -101,7 +101,6 @@
return dev;
}
-#ifdef CONFIG_PHYCONTROL
/* phy_prepare_link:
*
* description: Tells the PHY infrastructure to handle the
@@ -160,8 +159,6 @@
}
EXPORT_SYMBOL(phy_disconnect);
-#endif /* CONFIG_PHYCONTROL */
-
/* phy_attach:
*
* description: Called by drivers to attach to a particular PHY
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 0df7e92..d3c9958 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -863,7 +863,7 @@
err = PTR_ERR(ppp_class);
goto out_chrdev;
}
- class_device_create(ppp_class, MKDEV(PPP_MAJOR, 0), NULL, "ppp");
+ class_device_create(ppp_class, NULL, MKDEV(PPP_MAJOR, 0), NULL, "ppp");
err = devfs_mk_cdev(MKDEV(PPP_MAJOR, 0),
S_IFCHR|S_IRUSR|S_IWUSR, "ppp");
if (err)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index afb3f18..159b56a 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1027,6 +1027,7 @@
.get_strings = rtl8169_get_strings,
.get_stats_count = rtl8169_get_stats_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum,
@@ -1511,6 +1512,7 @@
/* Get MAC address. FIXME: read EEPROM */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
dev->open = rtl8169_open;
dev->hard_start_xmit = rtl8169_start_xmit;
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
new file mode 100644
index 0000000..12cde06
--- /dev/null
+++ b/drivers/net/rionet.c
@@ -0,0 +1,574 @@
+/*
+ * rionet - Ethernet driver over RapidIO messaging services
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/crc32.h>
+#include <linux/ethtool.h>
+
+#define DRV_NAME "rionet"
+#define DRV_VERSION "0.2"
+#define DRV_AUTHOR "Matt Porter <mporter@kernel.crashing.org>"
+#define DRV_DESC "Ethernet over RapidIO"
+
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
+
+#define RIONET_DEFAULT_MSGLEVEL \
+ (NETIF_MSG_DRV | \
+ NETIF_MSG_LINK | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_TX_ERR)
+
+#define RIONET_DOORBELL_JOIN 0x1000
+#define RIONET_DOORBELL_LEAVE 0x1001
+
+#define RIONET_MAILBOX 0
+
+#define RIONET_TX_RING_SIZE CONFIG_RIONET_TX_SIZE
+#define RIONET_RX_RING_SIZE CONFIG_RIONET_RX_SIZE
+
+static LIST_HEAD(rionet_peers);
+
+struct rionet_private {
+ struct rio_mport *mport;
+ struct sk_buff *rx_skb[RIONET_RX_RING_SIZE];
+ struct sk_buff *tx_skb[RIONET_TX_RING_SIZE];
+ struct net_device_stats stats;
+ int rx_slot;
+ int tx_slot;
+ int tx_cnt;
+ int ack_slot;
+ spinlock_t lock;
+ spinlock_t tx_lock;
+ u32 msg_enable;
+};
+
+struct rionet_peer {
+ struct list_head node;
+ struct rio_dev *rdev;
+ struct resource *res;
+};
+
+static int rionet_check = 0;
+static int rionet_capable = 1;
+
+/*
+ * This is a fast lookup table for for translating TX
+ * Ethernet packets into a destination RIO device. It
+ * could be made into a hash table to save memory depending
+ * on system trade-offs.
+ */
+static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES];
+
+#define is_rionet_capable(pef, src_ops, dst_ops) \
+ ((pef & RIO_PEF_INB_MBOX) && \
+ (pef & RIO_PEF_INB_DOORBELL) && \
+ (src_ops & RIO_SRC_OPS_DOORBELL) && \
+ (dst_ops & RIO_DST_OPS_DOORBELL))
+#define dev_rionet_capable(dev) \
+ is_rionet_capable(dev->pef, dev->src_ops, dev->dst_ops)
+
+#define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001)
+#define RIONET_GET_DESTID(x) (*(u16 *)(x + 4))
+
+static struct net_device_stats *rionet_stats(struct net_device *ndev)
+{
+ struct rionet_private *rnet = ndev->priv;
+ return &rnet->stats;
+}
+
+static int rionet_rx_clean(struct net_device *ndev)
+{
+ int i;
+ int error = 0;
+ struct rionet_private *rnet = ndev->priv;
+ void *data;
+
+ i = rnet->rx_slot;
+
+ do {
+ if (!rnet->rx_skb[i])
+ continue;
+
+ if (!(data = rio_get_inb_message(rnet->mport, RIONET_MAILBOX)))
+ break;
+
+ rnet->rx_skb[i]->data = data;
+ skb_put(rnet->rx_skb[i], RIO_MAX_MSG_SIZE);
+ rnet->rx_skb[i]->dev = ndev;
+ rnet->rx_skb[i]->protocol =
+ eth_type_trans(rnet->rx_skb[i], ndev);
+ error = netif_rx(rnet->rx_skb[i]);
+
+ if (error == NET_RX_DROP) {
+ rnet->stats.rx_dropped++;
+ } else if (error == NET_RX_BAD) {
+ if (netif_msg_rx_err(rnet))
+ printk(KERN_WARNING "%s: bad rx packet\n",
+ DRV_NAME);
+ rnet->stats.rx_errors++;
+ } else {
+ rnet->stats.rx_packets++;
+ rnet->stats.rx_bytes += RIO_MAX_MSG_SIZE;
+ }
+
+ } while ((i = (i + 1) % RIONET_RX_RING_SIZE) != rnet->rx_slot);
+
+ return i;
+}
+
+static void rionet_rx_fill(struct net_device *ndev, int end)
+{
+ int i;
+ struct rionet_private *rnet = ndev->priv;
+
+ i = rnet->rx_slot;
+ do {
+ rnet->rx_skb[i] = dev_alloc_skb(RIO_MAX_MSG_SIZE);
+
+ if (!rnet->rx_skb[i])
+ break;
+
+ rio_add_inb_buffer(rnet->mport, RIONET_MAILBOX,
+ rnet->rx_skb[i]->data);
+ } while ((i = (i + 1) % RIONET_RX_RING_SIZE) != end);
+
+ rnet->rx_slot = i;
+}
+
+static int rionet_queue_tx_msg(struct sk_buff *skb, struct net_device *ndev,
+ struct rio_dev *rdev)
+{
+ struct rionet_private *rnet = ndev->priv;
+
+ rio_add_outb_message(rnet->mport, rdev, 0, skb->data, skb->len);
+ rnet->tx_skb[rnet->tx_slot] = skb;
+
+ rnet->stats.tx_packets++;
+ rnet->stats.tx_bytes += skb->len;
+
+ if (++rnet->tx_cnt == RIONET_TX_RING_SIZE)
+ netif_stop_queue(ndev);
+
+ ++rnet->tx_slot;
+ rnet->tx_slot &= (RIONET_TX_RING_SIZE - 1);
+
+ if (netif_msg_tx_queued(rnet))
+ printk(KERN_INFO "%s: queued skb %8.8x len %8.8x\n", DRV_NAME,
+ (u32) skb, skb->len);
+
+ return 0;
+}
+
+static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ int i;
+ struct rionet_private *rnet = ndev->priv;
+ struct ethhdr *eth = (struct ethhdr *)skb->data;
+ u16 destid;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (!spin_trylock(&rnet->tx_lock)) {
+ local_irq_restore(flags);
+ return NETDEV_TX_LOCKED;
+ }
+
+ if ((rnet->tx_cnt + 1) > RIONET_TX_RING_SIZE) {
+ netif_stop_queue(ndev);
+ spin_unlock_irqrestore(&rnet->tx_lock, flags);
+ printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n",
+ ndev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (eth->h_dest[0] & 0x01) {
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++)
+ if (rionet_active[i])
+ rionet_queue_tx_msg(skb, ndev,
+ rionet_active[i]);
+ } else if (RIONET_MAC_MATCH(eth->h_dest)) {
+ destid = RIONET_GET_DESTID(eth->h_dest);
+ if (rionet_active[destid])
+ rionet_queue_tx_msg(skb, ndev, rionet_active[destid]);
+ }
+
+ spin_unlock_irqrestore(&rnet->tx_lock, flags);
+
+ return 0;
+}
+
+static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u16 tid,
+ u16 info)
+{
+ struct net_device *ndev = dev_id;
+ struct rionet_private *rnet = ndev->priv;
+ struct rionet_peer *peer;
+
+ if (netif_msg_intr(rnet))
+ printk(KERN_INFO "%s: doorbell sid %4.4x tid %4.4x info %4.4x",
+ DRV_NAME, sid, tid, info);
+ if (info == RIONET_DOORBELL_JOIN) {
+ if (!rionet_active[sid]) {
+ list_for_each_entry(peer, &rionet_peers, node) {
+ if (peer->rdev->destid == sid)
+ rionet_active[sid] = peer->rdev;
+ }
+ rio_mport_send_doorbell(mport, sid,
+ RIONET_DOORBELL_JOIN);
+ }
+ } else if (info == RIONET_DOORBELL_LEAVE) {
+ rionet_active[sid] = NULL;
+ } else {
+ if (netif_msg_intr(rnet))
+ printk(KERN_WARNING "%s: unhandled doorbell\n",
+ DRV_NAME);
+ }
+}
+
+static void rionet_inb_msg_event(struct rio_mport *mport, void *dev_id, int mbox, int slot)
+{
+ int n;
+ struct net_device *ndev = dev_id;
+ struct rionet_private *rnet = (struct rionet_private *)ndev->priv;
+
+ if (netif_msg_intr(rnet))
+ printk(KERN_INFO "%s: inbound message event, mbox %d slot %d\n",
+ DRV_NAME, mbox, slot);
+
+ spin_lock(&rnet->lock);
+ if ((n = rionet_rx_clean(ndev)) != rnet->rx_slot)
+ rionet_rx_fill(ndev, n);
+ spin_unlock(&rnet->lock);
+}
+
+static void rionet_outb_msg_event(struct rio_mport *mport, void *dev_id, int mbox, int slot)
+{
+ struct net_device *ndev = dev_id;
+ struct rionet_private *rnet = ndev->priv;
+
+ spin_lock(&rnet->lock);
+
+ if (netif_msg_intr(rnet))
+ printk(KERN_INFO
+ "%s: outbound message event, mbox %d slot %d\n",
+ DRV_NAME, mbox, slot);
+
+ while (rnet->tx_cnt && (rnet->ack_slot != slot)) {
+ /* dma unmap single */
+ dev_kfree_skb_irq(rnet->tx_skb[rnet->ack_slot]);
+ rnet->tx_skb[rnet->ack_slot] = NULL;
+ ++rnet->ack_slot;
+ rnet->ack_slot &= (RIONET_TX_RING_SIZE - 1);
+ rnet->tx_cnt--;
+ }
+
+ if (rnet->tx_cnt < RIONET_TX_RING_SIZE)
+ netif_wake_queue(ndev);
+
+ spin_unlock(&rnet->lock);
+}
+
+static int rionet_open(struct net_device *ndev)
+{
+ int i, rc = 0;
+ struct rionet_peer *peer, *tmp;
+ u32 pwdcsr;
+ struct rionet_private *rnet = ndev->priv;
+
+ if (netif_msg_ifup(rnet))
+ printk(KERN_INFO "%s: open\n", DRV_NAME);
+
+ if ((rc = rio_request_inb_dbell(rnet->mport,
+ (void *)ndev,
+ RIONET_DOORBELL_JOIN,
+ RIONET_DOORBELL_LEAVE,
+ rionet_dbell_event)) < 0)
+ goto out;
+
+ if ((rc = rio_request_inb_mbox(rnet->mport,
+ (void *)ndev,
+ RIONET_MAILBOX,
+ RIONET_RX_RING_SIZE,
+ rionet_inb_msg_event)) < 0)
+ goto out;
+
+ if ((rc = rio_request_outb_mbox(rnet->mport,
+ (void *)ndev,
+ RIONET_MAILBOX,
+ RIONET_TX_RING_SIZE,
+ rionet_outb_msg_event)) < 0)
+ goto out;
+
+ /* Initialize inbound message ring */
+ for (i = 0; i < RIONET_RX_RING_SIZE; i++)
+ rnet->rx_skb[i] = NULL;
+ rnet->rx_slot = 0;
+ rionet_rx_fill(ndev, 0);
+
+ rnet->tx_slot = 0;
+ rnet->tx_cnt = 0;
+ rnet->ack_slot = 0;
+
+ netif_carrier_on(ndev);
+ netif_start_queue(ndev);
+
+ list_for_each_entry_safe(peer, tmp, &rionet_peers, node) {
+ if (!(peer->res = rio_request_outb_dbell(peer->rdev,
+ RIONET_DOORBELL_JOIN,
+ RIONET_DOORBELL_LEAVE)))
+ {
+ printk(KERN_ERR "%s: error requesting doorbells\n",
+ DRV_NAME);
+ continue;
+ }
+
+ /*
+ * If device has initialized inbound doorbells,
+ * send a join message
+ */
+ rio_read_config_32(peer->rdev, RIO_WRITE_PORT_CSR, &pwdcsr);
+ if (pwdcsr & RIO_DOORBELL_AVAIL)
+ rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN);
+ }
+
+ out:
+ return rc;
+}
+
+static int rionet_close(struct net_device *ndev)
+{
+ struct rionet_private *rnet = (struct rionet_private *)ndev->priv;
+ struct rionet_peer *peer, *tmp;
+ int i;
+
+ if (netif_msg_ifup(rnet))
+ printk(KERN_INFO "%s: close\n", DRV_NAME);
+
+ netif_stop_queue(ndev);
+ netif_carrier_off(ndev);
+
+ for (i = 0; i < RIONET_RX_RING_SIZE; i++)
+ if (rnet->rx_skb[i])
+ kfree_skb(rnet->rx_skb[i]);
+
+ list_for_each_entry_safe(peer, tmp, &rionet_peers, node) {
+ if (rionet_active[peer->rdev->destid]) {
+ rio_send_doorbell(peer->rdev, RIONET_DOORBELL_LEAVE);
+ rionet_active[peer->rdev->destid] = NULL;
+ }
+ rio_release_outb_dbell(peer->rdev, peer->res);
+ }
+
+ rio_release_inb_dbell(rnet->mport, RIONET_DOORBELL_JOIN,
+ RIONET_DOORBELL_LEAVE);
+ rio_release_inb_mbox(rnet->mport, RIONET_MAILBOX);
+ rio_release_outb_mbox(rnet->mport, RIONET_MAILBOX);
+
+ return 0;
+}
+
+static void rionet_remove(struct rio_dev *rdev)
+{
+ struct net_device *ndev = NULL;
+ struct rionet_peer *peer, *tmp;
+
+ unregister_netdev(ndev);
+ kfree(ndev);
+
+ list_for_each_entry_safe(peer, tmp, &rionet_peers, node) {
+ list_del(&peer->node);
+ kfree(peer);
+ }
+}
+
+static void rionet_get_drvinfo(struct net_device *ndev,
+ struct ethtool_drvinfo *info)
+{
+ struct rionet_private *rnet = ndev->priv;
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "n/a");
+ strcpy(info->bus_info, rnet->mport->name);
+}
+
+static u32 rionet_get_msglevel(struct net_device *ndev)
+{
+ struct rionet_private *rnet = ndev->priv;
+
+ return rnet->msg_enable;
+}
+
+static void rionet_set_msglevel(struct net_device *ndev, u32 value)
+{
+ struct rionet_private *rnet = ndev->priv;
+
+ rnet->msg_enable = value;
+}
+
+static struct ethtool_ops rionet_ethtool_ops = {
+ .get_drvinfo = rionet_get_drvinfo,
+ .get_msglevel = rionet_get_msglevel,
+ .set_msglevel = rionet_set_msglevel,
+ .get_link = ethtool_op_get_link,
+};
+
+static int rionet_setup_netdev(struct rio_mport *mport)
+{
+ int rc = 0;
+ struct net_device *ndev = NULL;
+ struct rionet_private *rnet;
+ u16 device_id;
+
+ /* Allocate our net_device structure */
+ ndev = alloc_etherdev(sizeof(struct rionet_private));
+ if (ndev == NULL) {
+ printk(KERN_INFO "%s: could not allocate ethernet device.\n",
+ DRV_NAME);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Set up private area */
+ rnet = (struct rionet_private *)ndev->priv;
+ rnet->mport = mport;
+
+ /* Set the default MAC address */
+ device_id = rio_local_get_device_id(mport);
+ ndev->dev_addr[0] = 0x00;
+ ndev->dev_addr[1] = 0x01;
+ ndev->dev_addr[2] = 0x00;
+ ndev->dev_addr[3] = 0x01;
+ ndev->dev_addr[4] = device_id >> 8;
+ ndev->dev_addr[5] = device_id & 0xff;
+
+ /* Fill in the driver function table */
+ ndev->open = &rionet_open;
+ ndev->hard_start_xmit = &rionet_start_xmit;
+ ndev->stop = &rionet_close;
+ ndev->get_stats = &rionet_stats;
+ ndev->mtu = RIO_MAX_MSG_SIZE - 14;
+ ndev->features = NETIF_F_LLTX;
+ SET_ETHTOOL_OPS(ndev, &rionet_ethtool_ops);
+
+ SET_MODULE_OWNER(ndev);
+
+ spin_lock_init(&rnet->lock);
+ spin_lock_init(&rnet->tx_lock);
+
+ rnet->msg_enable = RIONET_DEFAULT_MSGLEVEL;
+
+ rc = register_netdev(ndev);
+ if (rc != 0)
+ goto out;
+
+ printk("%s: %s %s Version %s, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ ndev->name,
+ DRV_NAME,
+ DRV_DESC,
+ DRV_VERSION,
+ ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
+ ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
+
+ out:
+ return rc;
+}
+
+/*
+ * XXX Make multi-net safe
+ */
+static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+ int rc = -ENODEV;
+ u32 lpef, lsrc_ops, ldst_ops;
+ struct rionet_peer *peer;
+
+ /* If local device is not rionet capable, give up quickly */
+ if (!rionet_capable)
+ goto out;
+
+ /*
+ * First time through, make sure local device is rionet
+ * capable, setup netdev, and set flags so this is skipped
+ * on later probes
+ */
+ if (!rionet_check) {
+ rio_local_read_config_32(rdev->net->hport, RIO_PEF_CAR, &lpef);
+ rio_local_read_config_32(rdev->net->hport, RIO_SRC_OPS_CAR,
+ &lsrc_ops);
+ rio_local_read_config_32(rdev->net->hport, RIO_DST_OPS_CAR,
+ &ldst_ops);
+ if (!is_rionet_capable(lpef, lsrc_ops, ldst_ops)) {
+ printk(KERN_ERR
+ "%s: local device is not network capable\n",
+ DRV_NAME);
+ rionet_check = 1;
+ rionet_capable = 0;
+ goto out;
+ }
+
+ rc = rionet_setup_netdev(rdev->net->hport);
+ rionet_check = 1;
+ }
+
+ /*
+ * If the remote device has mailbox/doorbell capabilities,
+ * add it to the peer list.
+ */
+ if (dev_rionet_capable(rdev)) {
+ if (!(peer = kmalloc(sizeof(struct rionet_peer), GFP_KERNEL))) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ peer->rdev = rdev;
+ list_add_tail(&peer->node, &rionet_peers);
+ }
+
+ out:
+ return rc;
+}
+
+static struct rio_device_id rionet_id_table[] = {
+ {RIO_DEVICE(RIO_ANY_ID, RIO_ANY_ID)}
+};
+
+static struct rio_driver rionet_driver = {
+ .name = "rionet",
+ .id_table = rionet_id_table,
+ .probe = rionet_probe,
+ .remove = rionet_remove,
+};
+
+static int __init rionet_init(void)
+{
+ return rio_register_driver(&rionet_driver);
+}
+
+static void __exit rionet_exit(void)
+{
+ rio_unregister_driver(&rionet_driver);
+}
+
+module_init(rionet_init);
+module_exit(rionet_exit);
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index ec1a18d..19c2df9 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1710,10 +1710,8 @@
error = -EFAULT;
}
wf_out:
- if (oldimage)
- kfree(oldimage);
- if (image)
- kfree(image);
+ kfree(oldimage);
+ kfree(image);
return error;
case SIOCRRID:
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 7cefe55..00179bc 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -814,6 +814,17 @@
u64 rxgxs_ber_0; /* CHANGED */
u64 rxgxs_ber_1; /* CHANGED */
+ u64 spi_control;
+#define SPI_CONTROL_KEY(key) vBIT(key,0,4)
+#define SPI_CONTROL_BYTECNT(cnt) vBIT(cnt,29,3)
+#define SPI_CONTROL_CMD(cmd) vBIT(cmd,32,8)
+#define SPI_CONTROL_ADDR(addr) vBIT(addr,40,24)
+#define SPI_CONTROL_SEL1 BIT(4)
+#define SPI_CONTROL_REQ BIT(7)
+#define SPI_CONTROL_NACK BIT(5)
+#define SPI_CONTROL_DONE BIT(6)
+ u64 spi_data;
+#define SPI_DATA_WRITE(data,len) vBIT(data,0,len)
} XENA_dev_config_t;
#define XENA_REG_SPACE sizeof(XENA_dev_config_t)
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index dd451e0..3f5e93a 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -65,9 +65,11 @@
#include "s2io.h"
#include "s2io-regs.h"
+#define DRV_VERSION "Version 2.0.9.1"
+
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
-static char s2io_driver_version[] = "Version 2.0.8.1";
+static char s2io_driver_version[] = DRV_VERSION;
static inline int RXD_IS_UP2DT(RxD_t *rxdp)
{
@@ -307,6 +309,8 @@
#endif
/* Frequency of Rx desc syncs expressed as power of 2 */
static unsigned int rxsync_frequency = 3;
+/* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */
+static unsigned int intr_type = 0;
/*
* S2IO device table.
@@ -701,8 +705,7 @@
}
kfree(mac_control->rings[i].ba[j]);
}
- if (mac_control->rings[i].ba)
- kfree(mac_control->rings[i].ba);
+ kfree(mac_control->rings[i].ba);
}
#endif
@@ -1396,8 +1399,13 @@
writeq(val64, &bar0->rti_data1_mem);
val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
- RTI_DATA2_MEM_RX_UFC_B(0x2) |
- RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
+ RTI_DATA2_MEM_RX_UFC_B(0x2) ;
+ if (nic->intr_type == MSI_X)
+ val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
+ RTI_DATA2_MEM_RX_UFC_D(0x40));
+ else
+ val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
+ RTI_DATA2_MEM_RX_UFC_D(0x80));
writeq(val64, &bar0->rti_data2_mem);
for (i = 0; i < config->rx_ring_num; i++) {
@@ -1507,17 +1515,15 @@
#define LINK_UP_DOWN_INTERRUPT 1
#define MAC_RMAC_ERR_TIMER 2
-#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE)
-#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER
-#else
int s2io_link_fault_indication(nic_t *nic)
{
+ if (nic->intr_type != INTA)
+ return MAC_RMAC_ERR_TIMER;
if (nic->device_type == XFRAME_II_DEVICE)
return LINK_UP_DOWN_INTERRUPT;
else
return MAC_RMAC_ERR_TIMER;
}
-#endif
/**
* en_dis_able_nic_intrs - Enable or Disable the interrupts
@@ -1941,11 +1947,14 @@
}
/* Enable select interrupts */
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
- interruptible |= TX_PIC_INTR | RX_PIC_INTR;
- interruptible |= TX_MAC_INTR | RX_MAC_INTR;
-
- en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
+ if (nic->intr_type != INTA)
+ en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS);
+ else {
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+ interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+ interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+ en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
+ }
/*
* With some switches, link might be already up at this point.
@@ -2633,11 +2642,11 @@
err = txdlp->Control_1 & TXD_T_CODE;
if ((err >> 48) == 0xA) {
DBG_PRINT(TX_DBG, "TxD returned due \
- to loss of link\n");
+to loss of link\n");
}
else {
DBG_PRINT(ERR_DBG, "***TxD error \
- %llx\n", err);
+%llx\n", err);
}
}
@@ -2854,6 +2863,9 @@
/* Set swapper to enable I/O register access */
s2io_set_swapper(sp);
+ /* Restore the MSIX table entries from local variables */
+ restore_xmsi_data(sp);
+
/* Clear certain PCI/PCI-X fields after reset */
if (sp->device_type == XFRAME_II_DEVICE) {
/* Clear parity err detect bit */
@@ -2983,8 +2995,9 @@
SWAPPER_CTRL_RXD_W_FE |
SWAPPER_CTRL_RXF_W_FE |
SWAPPER_CTRL_XMSI_FE |
- SWAPPER_CTRL_XMSI_SE |
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
+ if (sp->intr_type == INTA)
+ val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
#else
/*
@@ -3005,8 +3018,9 @@
SWAPPER_CTRL_RXD_W_SE |
SWAPPER_CTRL_RXF_W_FE |
SWAPPER_CTRL_XMSI_FE |
- SWAPPER_CTRL_XMSI_SE |
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
+ if (sp->intr_type == INTA)
+ val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
#endif
val64 = readq(&bar0->swapper_ctrl);
@@ -3028,6 +3042,201 @@
return SUCCESS;
}
+int wait_for_msix_trans(nic_t *nic, int i)
+{
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ u64 val64;
+ int ret = 0, cnt = 0;
+
+ do {
+ val64 = readq(&bar0->xmsi_access);
+ if (!(val64 & BIT(15)))
+ break;
+ mdelay(1);
+ cnt++;
+ } while(cnt < 5);
+ if (cnt == 5) {
+ DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
+ ret = 1;
+ }
+
+ return ret;
+}
+
+void restore_xmsi_data(nic_t *nic)
+{
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ u64 val64;
+ int i;
+
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
+ writeq(nic->msix_info[i].data, &bar0->xmsi_data);
+ val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6));
+ writeq(val64, &bar0->xmsi_access);
+ if (wait_for_msix_trans(nic, i)) {
+ DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
+ continue;
+ }
+ }
+}
+
+void store_xmsi_data(nic_t *nic)
+{
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ u64 val64, addr, data;
+ int i;
+
+ /* Store and display */
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ val64 = (BIT(15) | vBIT(i, 26, 6));
+ writeq(val64, &bar0->xmsi_access);
+ if (wait_for_msix_trans(nic, i)) {
+ DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
+ continue;
+ }
+ addr = readq(&bar0->xmsi_address);
+ data = readq(&bar0->xmsi_data);
+ if (addr && data) {
+ nic->msix_info[i].addr = addr;
+ nic->msix_info[i].data = data;
+ }
+ }
+}
+
+int s2io_enable_msi(nic_t *nic)
+{
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ u16 msi_ctrl, msg_val;
+ struct config_param *config = &nic->config;
+ struct net_device *dev = nic->dev;
+ u64 val64, tx_mat, rx_mat;
+ int i, err;
+
+ val64 = readq(&bar0->pic_control);
+ val64 &= ~BIT(1);
+ writeq(val64, &bar0->pic_control);
+
+ err = pci_enable_msi(nic->pdev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: enabling MSI failed\n",
+ nic->dev->name);
+ return err;
+ }
+
+ /*
+ * Enable MSI and use MSI-1 in stead of the standard MSI-0
+ * for interrupt handling.
+ */
+ pci_read_config_word(nic->pdev, 0x4c, &msg_val);
+ msg_val ^= 0x1;
+ pci_write_config_word(nic->pdev, 0x4c, msg_val);
+ pci_read_config_word(nic->pdev, 0x4c, &msg_val);
+
+ pci_read_config_word(nic->pdev, 0x42, &msi_ctrl);
+ msi_ctrl |= 0x10;
+ pci_write_config_word(nic->pdev, 0x42, msi_ctrl);
+
+ /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */
+ tx_mat = readq(&bar0->tx_mat0_n[0]);
+ for (i=0; i<config->tx_fifo_num; i++) {
+ tx_mat |= TX_MAT_SET(i, 1);
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[0]);
+
+ rx_mat = readq(&bar0->rx_mat);
+ for (i=0; i<config->rx_ring_num; i++) {
+ rx_mat |= RX_MAT_SET(i, 1);
+ }
+ writeq(rx_mat, &bar0->rx_mat);
+
+ dev->irq = nic->pdev->irq;
+ return 0;
+}
+
+int s2io_enable_msi_x(nic_t *nic)
+{
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ u64 tx_mat, rx_mat;
+ u16 msi_control; /* Temp variable */
+ int ret, i, j, msix_indx = 1;
+
+ nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (nic->entries == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+
+ nic->s2io_entries =
+ kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry),
+ GFP_KERNEL);
+ if (nic->s2io_entries == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ kfree(nic->entries);
+ return -ENOMEM;
+ }
+ memset(nic->s2io_entries, 0,
+ MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ nic->entries[i].entry = i;
+ nic->s2io_entries[i].entry = i;
+ nic->s2io_entries[i].arg = NULL;
+ nic->s2io_entries[i].in_use = 0;
+ }
+
+ tx_mat = readq(&bar0->tx_mat0_n[0]);
+ for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
+ tx_mat |= TX_MAT_SET(i, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
+ nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[0]);
+
+ if (!nic->config.bimodal) {
+ rx_mat = readq(&bar0->rx_mat);
+ for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
+ rx_mat |= RX_MAT_SET(j, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(rx_mat, &bar0->rx_mat);
+ } else {
+ tx_mat = readq(&bar0->tx_mat0_n[7]);
+ for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
+ tx_mat |= TX_MAT_SET(i, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[7]);
+ }
+
+ ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
+ if (ret) {
+ DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
+ kfree(nic->entries);
+ kfree(nic->s2io_entries);
+ nic->entries = NULL;
+ nic->s2io_entries = NULL;
+ return -ENOMEM;
+ }
+
+ /*
+ * To enable MSI-X, MSI also needs to be enabled, due to a bug
+ * in the herc NIC. (Temp change, needs to be removed later)
+ */
+ pci_read_config_word(nic->pdev, 0x42, &msi_control);
+ msi_control |= 0x1; /* Enable MSI */
+ pci_write_config_word(nic->pdev, 0x42, msi_control);
+
+ return 0;
+}
+
/* ********************************************************* *
* Functions defined below concern the OS part of the driver *
* ********************************************************* */
@@ -3048,6 +3257,8 @@
{
nic_t *sp = dev->priv;
int err = 0;
+ int i;
+ u16 msi_control; /* Temp variable */
/*
* Make sure you have link off by default every time
@@ -3064,13 +3275,55 @@
goto hw_init_failed;
}
+ /* Store the values of the MSIX table in the nic_t structure */
+ store_xmsi_data(sp);
+
/* After proper initialization of H/W, register ISR */
- err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
- sp->name, dev);
- if (err) {
- DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
- dev->name);
- goto isr_registration_failed;
+ if (sp->intr_type == MSI) {
+ err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
+ SA_SHIRQ, sp->name, dev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: MSI registration \
+failed\n", dev->name);
+ goto isr_registration_failed;
+ }
+ }
+ if (sp->intr_type == MSI_X) {
+ for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
+ if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
+ sprintf(sp->desc1, "%s:MSI-X-%d-TX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_fifo_handle, 0, sp->desc1,
+ sp->s2io_entries[i].arg);
+ DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1,
+ sp->msix_info[i].addr);
+ } else {
+ sprintf(sp->desc2, "%s:MSI-X-%d-RX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_ring_handle, 0, sp->desc2,
+ sp->s2io_entries[i].arg);
+ DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2,
+ sp->msix_info[i].addr);
+ }
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
+failed\n", dev->name, i);
+ DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
+ goto isr_registration_failed;
+ }
+ sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
+ }
+ }
+ if (sp->intr_type == INTA) {
+ err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
+ sp->name, dev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
+ dev->name);
+ goto isr_registration_failed;
+ }
}
if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
@@ -3083,11 +3336,37 @@
return 0;
setting_mac_address_failed:
- free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type != MSI_X)
+ free_irq(sp->pdev->irq, dev);
isr_registration_failed:
del_timer_sync(&sp->alarm_timer);
+ if (sp->intr_type == MSI_X) {
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ for (i=1; (sp->s2io_entries[i].in_use ==
+ MSIX_REGISTERED_SUCCESS); i++) {
+ int vector = sp->entries[i].vector;
+ void *arg = sp->s2io_entries[i].arg;
+
+ free_irq(vector, arg);
+ }
+ pci_disable_msix(sp->pdev);
+
+ /* Temp */
+ pci_read_config_word(sp->pdev, 0x42, &msi_control);
+ msi_control &= 0xFFFE; /* Disable MSI */
+ pci_write_config_word(sp->pdev, 0x42, msi_control);
+ }
+ }
+ else if (sp->intr_type == MSI)
+ pci_disable_msi(sp->pdev);
s2io_reset(sp);
hw_init_failed:
+ if (sp->intr_type == MSI_X) {
+ if (sp->entries)
+ kfree(sp->entries);
+ if (sp->s2io_entries)
+ kfree(sp->s2io_entries);
+ }
return err;
}
@@ -3107,12 +3386,35 @@
int s2io_close(struct net_device *dev)
{
nic_t *sp = dev->priv;
+ int i;
+ u16 msi_control;
+
flush_scheduled_work();
netif_stop_queue(dev);
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
- free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type == MSI_X) {
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ for (i=1; (sp->s2io_entries[i].in_use ==
+ MSIX_REGISTERED_SUCCESS); i++) {
+ int vector = sp->entries[i].vector;
+ void *arg = sp->s2io_entries[i].arg;
+
+ free_irq(vector, arg);
+ }
+ pci_read_config_word(sp->pdev, 0x42, &msi_control);
+ msi_control &= 0xFFFE; /* Disable MSI */
+ pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+ pci_disable_msix(sp->pdev);
+ }
+ }
+ else {
+ free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type == MSI)
+ pci_disable_msi(sp->pdev);
+ }
sp->device_close_flag = TRUE; /* Device is shut down. */
return 0;
}
@@ -3278,6 +3580,104 @@
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
}
+static irqreturn_t
+s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ nic_t *sp = dev->priv;
+ int i;
+ int ret;
+ mac_info_t *mac_control;
+ struct config_param *config;
+
+ atomic_inc(&sp->isr_cnt);
+ mac_control = &sp->mac_control;
+ config = &sp->config;
+ DBG_PRINT(INTR_DBG, "%s: MSI handler\n", __FUNCTION__);
+
+ /* If Intr is because of Rx Traffic */
+ for (i = 0; i < config->rx_ring_num; i++)
+ rx_intr_handler(&mac_control->rings[i]);
+
+ /* If Intr is because of Tx Traffic */
+ for (i = 0; i < config->tx_fifo_num; i++)
+ tx_intr_handler(&mac_control->fifos[i]);
+
+ /*
+ * If the Rx buffer count is below the panic threshold then
+ * reallocate the buffers from the interrupt handler itself,
+ * else schedule a tasklet to reallocate the buffers.
+ */
+ for (i = 0; i < config->rx_ring_num; i++) {
+ int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
+ int level = rx_buffer_level(sp, rxb_size, i);
+
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory",
+ dev->name);
+ DBG_PRINT(ERR_DBG, " in ISR!!\n");
+ clear_bit(0, (&sp->tasklet_status));
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+ }
+ clear_bit(0, (&sp->tasklet_status));
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
+ }
+ }
+
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ ring_info_t *ring = (ring_info_t *)dev_id;
+ nic_t *sp = ring->nic;
+ int rxb_size, level, rng_n;
+
+ atomic_inc(&sp->isr_cnt);
+ rx_intr_handler(ring);
+
+ rng_n = ring->ring_no;
+ rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
+ level = rx_buffer_level(sp, rxb_size, rng_n);
+
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ int ret;
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "Out of memory in %s",
+ __FUNCTION__);
+ clear_bit(0, (&sp->tasklet_status));
+ return IRQ_HANDLED;
+ }
+ clear_bit(0, (&sp->tasklet_status));
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
+ }
+ atomic_dec(&sp->isr_cnt);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ fifo_info_t *fifo = (fifo_info_t *)dev_id;
+ nic_t *sp = fifo->nic;
+
+ atomic_inc(&sp->isr_cnt);
+ tx_intr_handler(fifo);
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+}
+
static void s2io_txpic_intr_handle(nic_t *sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
@@ -3778,11 +4178,10 @@
{
nic_t *sp = dev->priv;
- strncpy(info->driver, s2io_driver_name, sizeof(s2io_driver_name));
- strncpy(info->version, s2io_driver_version,
- sizeof(s2io_driver_version));
- strncpy(info->fw_version, "", 32);
- strncpy(info->bus_info, pci_name(sp->pdev), 32);
+ strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
+ strncpy(info->version, s2io_driver_version, sizeof(info->version));
+ strncpy(info->fw_version, "", sizeof(info->fw_version));
+ strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
info->regdump_len = XENA_REG_SPACE;
info->eedump_len = XENA_EEPROM_SPACE;
info->testinfo_len = S2IO_TEST_LEN;
@@ -3978,29 +4377,53 @@
*/
#define S2IO_DEV_ID 5
-static int read_eeprom(nic_t * sp, int off, u32 * data)
+static int read_eeprom(nic_t * sp, int off, u64 * data)
{
int ret = -1;
u32 exit_cnt = 0;
u64 val64;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
- I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
- I2C_CONTROL_CNTL_START;
- SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
+ I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
+ I2C_CONTROL_CNTL_START;
+ SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
- while (exit_cnt < 5) {
- val64 = readq(&bar0->i2c_control);
- if (I2C_CONTROL_CNTL_END(val64)) {
- *data = I2C_CONTROL_GET_DATA(val64);
- ret = 0;
- break;
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->i2c_control);
+ if (I2C_CONTROL_CNTL_END(val64)) {
+ *data = I2C_CONTROL_GET_DATA(val64);
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
}
- msleep(50);
- exit_cnt++;
}
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
+ SPI_CONTROL_BYTECNT(0x3) |
+ SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ val64 |= SPI_CONTROL_REQ;
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->spi_control);
+ if (val64 & SPI_CONTROL_NACK) {
+ ret = 1;
+ break;
+ } else if (val64 & SPI_CONTROL_DONE) {
+ *data = readq(&bar0->spi_data);
+ *data &= 0xffffff;
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
+ }
+ }
return ret;
}
@@ -4019,28 +4442,53 @@
* 0 on success, -1 on failure.
*/
-static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
+static int write_eeprom(nic_t * sp, int off, u64 data, int cnt)
{
int exit_cnt = 0, ret = -1;
u64 val64;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
- I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA(data) |
- I2C_CONTROL_CNTL_START;
- SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
+ I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
+ I2C_CONTROL_CNTL_START;
+ SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
- while (exit_cnt < 5) {
- val64 = readq(&bar0->i2c_control);
- if (I2C_CONTROL_CNTL_END(val64)) {
- if (!(val64 & I2C_CONTROL_NACK))
- ret = 0;
- break;
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->i2c_control);
+ if (I2C_CONTROL_CNTL_END(val64)) {
+ if (!(val64 & I2C_CONTROL_NACK))
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
}
- msleep(50);
- exit_cnt++;
}
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ int write_cnt = (cnt == 8) ? 0 : cnt;
+ writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
+
+ val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
+ SPI_CONTROL_BYTECNT(write_cnt) |
+ SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ val64 |= SPI_CONTROL_REQ;
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->spi_control);
+ if (val64 & SPI_CONTROL_NACK) {
+ ret = 1;
+ break;
+ } else if (val64 & SPI_CONTROL_DONE) {
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
+ }
+ }
return ret;
}
@@ -4060,7 +4508,8 @@
static int s2io_ethtool_geeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 * data_buf)
{
- u32 data, i, valid;
+ u32 i, valid;
+ u64 data;
nic_t *sp = dev->priv;
eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
@@ -4098,7 +4547,7 @@
u8 * data_buf)
{
int len = eeprom->len, cnt = 0;
- u32 valid = 0, data;
+ u64 valid = 0, data;
nic_t *sp = dev->priv;
if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
@@ -4146,7 +4595,7 @@
static int s2io_register_test(nic_t * sp, uint64_t * data)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- u64 val64 = 0;
+ u64 val64 = 0, exp_val;
int fail = 0;
val64 = readq(&bar0->pif_rd_swapper_fb);
@@ -4162,7 +4611,11 @@
}
val64 = readq(&bar0->rx_queue_cfg);
- if (val64 != 0x0808080808080808ULL) {
+ if (sp->device_type == XFRAME_II_DEVICE)
+ exp_val = 0x0404040404040404ULL;
+ else
+ exp_val = 0x0808080808080808ULL;
+ if (val64 != exp_val) {
fail = 1;
DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
}
@@ -4190,7 +4643,7 @@
}
*data = fail;
- return 0;
+ return fail;
}
/**
@@ -4209,58 +4662,83 @@
static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
{
int fail = 0;
- u32 ret_data;
+ u64 ret_data, org_4F0, org_7F0;
+ u8 saved_4F0 = 0, saved_7F0 = 0;
+ struct net_device *dev = sp->dev;
/* Test Write Error at offset 0 */
- if (!write_eeprom(sp, 0, 0, 3))
- fail = 1;
+ /* Note that SPI interface allows write access to all areas
+ * of EEPROM. Hence doing all negative testing only for Xframe I.
+ */
+ if (sp->device_type == XFRAME_I_DEVICE)
+ if (!write_eeprom(sp, 0, 0, 3))
+ fail = 1;
+
+ /* Save current values at offsets 0x4F0 and 0x7F0 */
+ if (!read_eeprom(sp, 0x4F0, &org_4F0))
+ saved_4F0 = 1;
+ if (!read_eeprom(sp, 0x7F0, &org_7F0))
+ saved_7F0 = 1;
/* Test Write at offset 4f0 */
- if (write_eeprom(sp, 0x4F0, 0x01234567, 3))
+ if (write_eeprom(sp, 0x4F0, 0x012345, 3))
fail = 1;
if (read_eeprom(sp, 0x4F0, &ret_data))
fail = 1;
- if (ret_data != 0x01234567)
+ if (ret_data != 0x012345) {
+ DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data);
fail = 1;
+ }
/* Reset the EEPROM data go FFFF */
- write_eeprom(sp, 0x4F0, 0xFFFFFFFF, 3);
+ write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
/* Test Write Request Error at offset 0x7c */
- if (!write_eeprom(sp, 0x07C, 0, 3))
+ if (sp->device_type == XFRAME_I_DEVICE)
+ if (!write_eeprom(sp, 0x07C, 0, 3))
+ fail = 1;
+
+ /* Test Write Request at offset 0x7f0 */
+ if (write_eeprom(sp, 0x7F0, 0x012345, 3))
+ fail = 1;
+ if (read_eeprom(sp, 0x7F0, &ret_data))
fail = 1;
- /* Test Write Request at offset 0x7fc */
- if (write_eeprom(sp, 0x7FC, 0x01234567, 3))
+ if (ret_data != 0x012345) {
+ DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data);
fail = 1;
- if (read_eeprom(sp, 0x7FC, &ret_data))
- fail = 1;
-
- if (ret_data != 0x01234567)
- fail = 1;
+ }
/* Reset the EEPROM data go FFFF */
- write_eeprom(sp, 0x7FC, 0xFFFFFFFF, 3);
+ write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
- /* Test Write Error at offset 0x80 */
- if (!write_eeprom(sp, 0x080, 0, 3))
- fail = 1;
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ /* Test Write Error at offset 0x80 */
+ if (!write_eeprom(sp, 0x080, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 0xfc */
- if (!write_eeprom(sp, 0x0FC, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 0xfc */
+ if (!write_eeprom(sp, 0x0FC, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 0x100 */
- if (!write_eeprom(sp, 0x100, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 0x100 */
+ if (!write_eeprom(sp, 0x100, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 4ec */
- if (!write_eeprom(sp, 0x4EC, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 4ec */
+ if (!write_eeprom(sp, 0x4EC, 0, 3))
+ fail = 1;
+ }
+
+ /* Restore values at offsets 0x4F0 and 0x7F0 */
+ if (saved_4F0)
+ write_eeprom(sp, 0x4F0, org_4F0, 3);
+ if (saved_7F0)
+ write_eeprom(sp, 0x7F0, org_7F0, 3);
*data = fail;
- return 0;
+ return fail;
}
/**
@@ -4342,7 +4820,7 @@
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
- int cnt, iteration = 0, test_pass = 0;
+ int cnt, iteration = 0, test_fail = 0;
val64 = readq(&bar0->adapter_control);
val64 &= ~ADAPTER_ECC_EN;
@@ -4350,7 +4828,7 @@
val64 = readq(&bar0->mc_rldram_test_ctrl);
val64 |= MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
val64 = readq(&bar0->mc_rldram_mrs);
val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
@@ -4378,17 +4856,12 @@
}
writeq(val64, &bar0->mc_rldram_test_d2);
- val64 = (u64) (0x0000003fffff0000ULL);
+ val64 = (u64) (0x0000003ffffe0100ULL);
writeq(val64, &bar0->mc_rldram_test_add);
-
- val64 = MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
-
- val64 |=
- MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
- MC_RLDRAM_TEST_GO;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
+ MC_RLDRAM_TEST_GO;
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
for (cnt = 0; cnt < 5; cnt++) {
val64 = readq(&bar0->mc_rldram_test_ctrl);
@@ -4400,11 +4873,8 @@
if (cnt == 5)
break;
- val64 = MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
-
- val64 |= MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
for (cnt = 0; cnt < 5; cnt++) {
val64 = readq(&bar0->mc_rldram_test_ctrl);
@@ -4417,18 +4887,18 @@
break;
val64 = readq(&bar0->mc_rldram_test_ctrl);
- if (val64 & MC_RLDRAM_TEST_PASS)
- test_pass = 1;
+ if (!(val64 & MC_RLDRAM_TEST_PASS))
+ test_fail = 1;
iteration++;
}
- if (!test_pass)
- *data = 1;
- else
- *data = 0;
+ *data = test_fail;
- return 0;
+ /* Bring the adapter out of test mode */
+ SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
+
+ return test_fail;
}
/**
@@ -4932,7 +5402,7 @@
static int s2io_card_up(nic_t * sp)
{
- int i, ret;
+ int i, ret = 0;
mac_info_t *mac_control;
struct config_param *config;
struct net_device *dev = (struct net_device *) sp->dev;
@@ -4944,6 +5414,15 @@
return -ENODEV;
}
+ if (sp->intr_type == MSI)
+ ret = s2io_enable_msi(sp);
+ else if (sp->intr_type == MSI_X)
+ ret = s2io_enable_msi_x(sp);
+ if (ret) {
+ DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
+ sp->intr_type = INTA;
+ }
+
/*
* Initializing the Rx buffers. For now we are considering only 1
* Rx ring and initializing buffers into 30 Rx blocks
@@ -5228,6 +5707,8 @@
MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
module_param(tx_fifo_num, int, 0);
module_param(rx_ring_num, int, 0);
module_param_array(tx_fifo_len, uint, NULL, 0);
@@ -5245,6 +5726,7 @@
module_param(indicate_max_pkts, int, 0);
#endif
module_param(rxsync_frequency, int, 0);
+module_param(intr_type, int, 0);
/**
* s2io_init_nic - Initialization of the adapter .
@@ -5274,9 +5756,16 @@
mac_info_t *mac_control;
struct config_param *config;
int mode;
+ u8 dev_intr_type = intr_type;
#ifdef CONFIG_S2IO_NAPI
- DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
+ if (dev_intr_type != INTA) {
+ DBG_PRINT(ERR_DBG, "NAPI cannot be enabled when MSI/MSI-X \
+is enabled. Defaulting to INTA\n");
+ dev_intr_type = INTA;
+ }
+ else
+ DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
#endif
if ((ret = pci_enable_device(pdev))) {
@@ -5303,10 +5792,35 @@
return -ENOMEM;
}
- if (pci_request_regions(pdev, s2io_driver_name)) {
- DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
- pci_disable_device(pdev);
- return -ENODEV;
+ if ((dev_intr_type == MSI_X) &&
+ ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
+ (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
+ DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. \
+Defaulting to INTA\n");
+ dev_intr_type = INTA;
+ }
+ if (dev_intr_type != MSI_X) {
+ if (pci_request_regions(pdev, s2io_driver_name)) {
+ DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
+ }
+ else {
+ if (!(request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0), s2io_driver_name))) {
+ DBG_PRINT(ERR_DBG, "bar0 Request Regions failed\n");
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
+ if (!(request_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2), s2io_driver_name))) {
+ DBG_PRINT(ERR_DBG, "bar1 Request Regions failed\n");
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
}
dev = alloc_etherdev(sizeof(nic_t));
@@ -5329,6 +5843,7 @@
sp->pdev = pdev;
sp->high_dma_flag = dma_flag;
sp->device_enabled_once = FALSE;
+ sp->intr_type = dev_intr_type;
if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
(pdev->device == PCI_DEVICE_ID_HERC_UNI))
@@ -5336,6 +5851,7 @@
else
sp->device_type = XFRAME_I_DEVICE;
+
/* Initialize some PCI/PCI-X fields of the NIC. */
s2io_init_pci(sp);
@@ -5571,12 +6087,23 @@
if (sp->device_type & XFRAME_II_DEVICE) {
DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ",
dev->name);
- DBG_PRINT(ERR_DBG, "(rev %d), %s",
+ DBG_PRINT(ERR_DBG, "(rev %d), Version %s",
get_xena_rev_id(sp->pdev),
s2io_driver_version);
#ifdef CONFIG_2BUFF_MODE
DBG_PRINT(ERR_DBG, ", Buffer mode %d",2);
#endif
+ switch(sp->intr_type) {
+ case INTA:
+ DBG_PRINT(ERR_DBG, ", Intr type INTA");
+ break;
+ case MSI:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI");
+ break;
+ case MSI_X:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI-X");
+ break;
+ }
DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n");
DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
@@ -5595,12 +6122,23 @@
} else {
DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ",
dev->name);
- DBG_PRINT(ERR_DBG, "(rev %d), %s",
+ DBG_PRINT(ERR_DBG, "(rev %d), Version %s",
get_xena_rev_id(sp->pdev),
s2io_driver_version);
#ifdef CONFIG_2BUFF_MODE
DBG_PRINT(ERR_DBG, ", Buffer mode %d",2);
#endif
+ switch(sp->intr_type) {
+ case INTA:
+ DBG_PRINT(ERR_DBG, ", Intr type INTA");
+ break;
+ case MSI:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI");
+ break;
+ case MSI_X:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI-X");
+ break;
+ }
DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n");
DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
sp->def_mac_addr[0].mac_addr[0],
@@ -5644,7 +6182,14 @@
mem_alloc_failed:
free_shared_mem(sp);
pci_disable_device(pdev);
- pci_release_regions(pdev);
+ if (dev_intr_type != MSI_X)
+ pci_release_regions(pdev);
+ else {
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ release_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ }
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
@@ -5678,7 +6223,14 @@
iounmap(sp->bar0);
iounmap(sp->bar1);
pci_disable_device(pdev);
- pci_release_regions(pdev);
+ if (sp->intr_type != MSI_X)
+ pci_release_regions(pdev);
+ else {
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ release_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ }
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 89151cb..1cc24b5 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -652,6 +652,30 @@
#define SMALL_BLK_CNT 30
#define LARGE_BLK_CNT 100
+/*
+ * Structure to keep track of the MSI-X vectors and the corresponding
+ * argument registered against each vector
+ */
+#define MAX_REQUESTED_MSI_X 17
+struct s2io_msix_entry
+{
+ u16 vector;
+ u16 entry;
+ void *arg;
+
+ u8 type;
+#define MSIX_FIFO_TYPE 1
+#define MSIX_RING_TYPE 2
+
+ u8 in_use;
+#define MSIX_REGISTERED_SUCCESS 0xAA
+};
+
+struct msix_info_st {
+ u64 addr;
+ u64 data;
+};
+
/* Structure representing one instance of the NIC */
struct s2io_nic {
#ifdef CONFIG_S2IO_NAPI
@@ -719,13 +743,8 @@
* a schedule task that will set the correct Link state once the
* NIC's PHY has stabilized after a state change.
*/
-#ifdef INIT_TQUEUE
- struct tq_struct rst_timer_task;
- struct tq_struct set_link_task;
-#else
struct work_struct rst_timer_task;
struct work_struct set_link_task;
-#endif
/* Flag that can be used to turn on or turn off the Rx checksum
* offload feature.
@@ -748,10 +767,23 @@
atomic_t card_state;
volatile unsigned long link_state;
struct vlan_group *vlgrp;
+#define MSIX_FLG 0xA5
+ struct msix_entry *entries;
+ struct s2io_msix_entry *s2io_entries;
+ char desc1[35];
+ char desc2[35];
+
+ struct msix_info_st msix_info[0x3f];
+
#define XFRAME_I_DEVICE 1
#define XFRAME_II_DEVICE 2
u8 device_type;
+#define INTA 0
+#define MSI 1
+#define MSI_X 2
+ u8 intr_type;
+
spinlock_t rx_lock;
atomic_t isr_cnt;
};
@@ -886,6 +918,13 @@
static void s2io_init_pci(nic_t * sp);
int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
static void s2io_alarm_handle(unsigned long data);
+static int s2io_enable_msi(nic_t *nic);
+static irqreturn_t s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t
+s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t
+s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs);
+int s2io_enable_msi_x(nic_t *nic);
static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs);
static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
static struct ethtool_ops netdev_ethtool_ops;
@@ -894,4 +933,5 @@
static void s2io_card_down(nic_t *nic);
static int s2io_card_up(nic_t *nic);
int get_xena_rev_id(struct pci_dev *pdev);
+void restore_xmsi_data(nic_t *nic);
#endif /* _S2IO_H */
diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c
index fd01670..110e777 100644
--- a/drivers/net/saa9730.c
+++ b/drivers/net/saa9730.c
@@ -997,10 +997,7 @@
if (dev) {
unregister_netdev(dev);
-
- if (dev->priv)
- kfree(dev->priv);
-
+ kfree(dev->priv);
free_netdev(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
@@ -1096,8 +1093,7 @@
return 0;
out:
- if (dev->priv)
- kfree(dev->priv);
+ kfree(dev->priv);
return ret;
}
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 7abd55a..aa4ca18 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -10,7 +10,7 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
@@ -118,8 +118,6 @@
********************************************************************* */
-typedef unsigned long sbmac_port_t;
-
typedef enum { sbmac_speed_auto, sbmac_speed_10,
sbmac_speed_100, sbmac_speed_1000 } sbmac_speed_t;
@@ -129,7 +127,7 @@
typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame,
sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t;
-typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
+typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
sbmac_state_broken } sbmac_state_t;
@@ -144,17 +142,13 @@
#define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES)
-#define SBMAC_READCSR(t) __raw_readq((unsigned long)t)
-#define SBMAC_WRITECSR(t,v) __raw_writeq(v, (unsigned long)t)
-
-
#define SBMAC_MAX_TXDESCR 32
#define SBMAC_MAX_RXDESCR 32
#define ETHER_ALIGN 2
#define ETHER_ADDR_LEN 6
-#define ENET_PACKET_SIZE 1518
-/*#define ENET_PACKET_SIZE 9216 */
+#define ENET_PACKET_SIZE 1518
+/*#define ENET_PACKET_SIZE 9216 */
/**********************************************************************
* DMA Descriptor structure
@@ -172,12 +166,12 @@
********************************************************************* */
typedef struct sbmacdma_s {
-
- /*
+
+ /*
* This stuff is used to identify the channel and the registers
* associated with it.
*/
-
+
struct sbmac_softc *sbdma_eth; /* back pointer to associated MAC */
int sbdma_channel; /* channel number */
int sbdma_txdir; /* direction (1=transmit) */
@@ -187,21 +181,21 @@
int sbdma_int_timeout; /* # usec rx/tx interrupt */
#endif
- sbmac_port_t sbdma_config0; /* DMA config register 0 */
- sbmac_port_t sbdma_config1; /* DMA config register 1 */
- sbmac_port_t sbdma_dscrbase; /* Descriptor base address */
- sbmac_port_t sbdma_dscrcnt; /* Descriptor count register */
- sbmac_port_t sbdma_curdscr; /* current descriptor address */
-
+ volatile void __iomem *sbdma_config0; /* DMA config register 0 */
+ volatile void __iomem *sbdma_config1; /* DMA config register 1 */
+ volatile void __iomem *sbdma_dscrbase; /* Descriptor base address */
+ volatile void __iomem *sbdma_dscrcnt; /* Descriptor count register */
+ volatile void __iomem *sbdma_curdscr; /* current descriptor address */
+
/*
* This stuff is for maintenance of the ring
*/
-
+
sbdmadscr_t *sbdma_dscrtable; /* base of descriptor table */
sbdmadscr_t *sbdma_dscrtable_end; /* end of descriptor table */
-
+
struct sk_buff **sbdma_ctxtable; /* context table, one per descr */
-
+
paddr_t sbdma_dscrtable_phys; /* and also the phys addr */
sbdmadscr_t *sbdma_addptr; /* next dscr for sw to add */
sbdmadscr_t *sbdma_remptr; /* next dscr for sw to remove */
@@ -213,15 +207,15 @@
********************************************************************* */
struct sbmac_softc {
-
+
/*
* Linux-specific things
*/
-
+
struct net_device *sbm_dev; /* pointer to linux device */
spinlock_t sbm_lock; /* spin lock */
struct timer_list sbm_timer; /* for monitoring MII */
- struct net_device_stats sbm_stats;
+ struct net_device_stats sbm_stats;
int sbm_devflags; /* current device flags */
int sbm_phy_oldbmsr;
@@ -229,31 +223,31 @@
int sbm_phy_oldk1stsr;
int sbm_phy_oldlinkstat;
int sbm_buffersize;
-
+
unsigned char sbm_phys[2];
-
+
/*
* Controller-specific things
*/
-
- unsigned long sbm_base; /* MAC's base address */
+
+ volatile void __iomem *sbm_base; /* MAC's base address */
sbmac_state_t sbm_state; /* current state */
-
- sbmac_port_t sbm_macenable; /* MAC Enable Register */
- sbmac_port_t sbm_maccfg; /* MAC Configuration Register */
- sbmac_port_t sbm_fifocfg; /* FIFO configuration register */
- sbmac_port_t sbm_framecfg; /* Frame configuration register */
- sbmac_port_t sbm_rxfilter; /* receive filter register */
- sbmac_port_t sbm_isr; /* Interrupt status register */
- sbmac_port_t sbm_imr; /* Interrupt mask register */
- sbmac_port_t sbm_mdio; /* MDIO register */
-
+
+ volatile void __iomem *sbm_macenable; /* MAC Enable Register */
+ volatile void __iomem *sbm_maccfg; /* MAC Configuration Register */
+ volatile void __iomem *sbm_fifocfg; /* FIFO configuration register */
+ volatile void __iomem *sbm_framecfg; /* Frame configuration register */
+ volatile void __iomem *sbm_rxfilter; /* receive filter register */
+ volatile void __iomem *sbm_isr; /* Interrupt status register */
+ volatile void __iomem *sbm_imr; /* Interrupt mask register */
+ volatile void __iomem *sbm_mdio; /* MDIO register */
+
sbmac_speed_t sbm_speed; /* current speed */
sbmac_duplex_t sbm_duplex; /* current duplex */
sbmac_fc_t sbm_fc; /* current flow control setting */
-
+
unsigned char sbm_hwaddr[ETHER_ADDR_LEN];
-
+
sbmacdma_t sbm_txdma; /* for now, only use channel 0 */
sbmacdma_t sbm_rxdma;
int rx_hw_checksum;
@@ -302,6 +296,7 @@
static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int sbmac_close(struct net_device *dev);
static int sbmac_mii_poll(struct sbmac_softc *s,int noisy);
+static int sbmac_mii_probe(struct net_device *dev);
static void sbmac_mii_sync(struct sbmac_softc *s);
static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt);
@@ -439,6 +434,9 @@
#define MII_BMCR 0x00 /* Basic mode control register (rw) */
#define MII_BMSR 0x01 /* Basic mode status register (ro) */
+#define MII_PHYIDR1 0x02
+#define MII_PHYIDR2 0x03
+
#define MII_K1STSR 0x0A /* 1K Status Register (ro) */
#define MII_ANLPAR 0x05 /* Autonegotiation lnk partner abilities (rw) */
@@ -450,13 +448,13 @@
/**********************************************************************
* SBMAC_MII_SYNC(s)
- *
+ *
* Synchronize with the MII - send a pattern of bits to the MII
* that will guarantee that it is ready to accept a command.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -467,25 +465,25 @@
uint64_t bits;
int mac_mdio_genc;
- mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
-
+ mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
+
bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT;
-
- SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
-
+
+ __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
+
for (cnt = 0; cnt < 32; cnt++) {
- SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc);
- SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
+ __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
}
}
/**********************************************************************
* SBMAC_MII_SENDDATA(s,data,bitcnt)
- *
+ *
* Send some bits to the MII. The bits to be sent are right-
* justified in the 'data' parameter.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* data - data to send
* bitcnt - number of bits to send
@@ -498,20 +496,20 @@
unsigned int curmask;
int mac_mdio_genc;
- mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
-
+ mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
+
bits = M_MAC_MDIO_DIR_OUTPUT;
- SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
-
+ __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
+
curmask = 1 << (bitcnt - 1);
-
+
for (i = 0; i < bitcnt; i++) {
if (data & curmask)
bits |= M_MAC_MDIO_OUT;
else bits &= ~M_MAC_MDIO_OUT;
- SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
- SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc);
- SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
+ __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
curmask >>= 1;
}
}
@@ -520,14 +518,14 @@
/**********************************************************************
* SBMAC_MII_READ(s,phyaddr,regidx)
- *
+ *
* Read a PHY register.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* phyaddr - PHY's address
* regidx = index of register to read
- *
+ *
* Return value:
* value read, or 0 if an error occurred.
********************************************************************* */
@@ -543,9 +541,9 @@
* Synchronize ourselves so that the PHY knows the next
* thing coming down is a command
*/
-
+
sbmac_mii_sync(s);
-
+
/*
* Send the data to the PHY. The sequence is
* a "start" command (2 bits)
@@ -553,59 +551,55 @@
* the PHY addr (5 bits)
* the register index (5 bits)
*/
-
+
sbmac_mii_senddata(s,MII_COMMAND_START, 2);
sbmac_mii_senddata(s,MII_COMMAND_READ, 2);
sbmac_mii_senddata(s,phyaddr, 5);
sbmac_mii_senddata(s,regidx, 5);
-
- mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
-
- /*
+
+ mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
+
+ /*
* Switch the port around without a clock transition.
*/
- SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
-
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
+
/*
* Send out a clock pulse to signal we want the status
*/
-
- SBMAC_WRITECSR(s->sbm_mdio,
- M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc);
- SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
-
- /*
+
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
+
+ /*
* If an error occurred, the PHY will signal '1' back
*/
- error = SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN;
-
- /*
+ error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN;
+
+ /*
* Issue an 'idle' clock pulse, but keep the direction
* the same.
*/
- SBMAC_WRITECSR(s->sbm_mdio,
- M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc);
- SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
-
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
+
regval = 0;
-
+
for (idx = 0; idx < 16; idx++) {
regval <<= 1;
-
+
if (error == 0) {
- if (SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN)
+ if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN)
regval |= 1;
}
-
- SBMAC_WRITECSR(s->sbm_mdio,
- M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc);
- SBMAC_WRITECSR(s->sbm_mdio,
- M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
+
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
}
-
+
/* Switch back to output */
- SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc);
-
+ __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio);
+
if (error == 0)
return regval;
return 0;
@@ -614,15 +608,15 @@
/**********************************************************************
* SBMAC_MII_WRITE(s,phyaddr,regidx,regval)
- *
+ *
* Write a value to a PHY register.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* phyaddr - PHY to use
* regidx - register within the PHY
* regval - data to write to register
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -633,7 +627,7 @@
int mac_mdio_genc;
sbmac_mii_sync(s);
-
+
sbmac_mii_senddata(s,MII_COMMAND_START,2);
sbmac_mii_senddata(s,MII_COMMAND_WRITE,2);
sbmac_mii_senddata(s,phyaddr, 5);
@@ -641,27 +635,27 @@
sbmac_mii_senddata(s,MII_COMMAND_ACK,2);
sbmac_mii_senddata(s,regval,16);
- mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
+ mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
- SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc);
+ __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio);
}
/**********************************************************************
* SBDMA_INITCTX(d,s,chan,txrx,maxdescr)
- *
+ *
* Initialize a DMA channel context. Since there are potentially
* eight DMA channels per MAC, it's nice to do this in a standard
- * way.
- *
- * Input parameters:
+ * way.
+ *
+ * Input parameters:
* d - sbmacdma_t structure (DMA channel context)
* s - sbmac_softc structure (pointer to a MAC)
* chan - channel number (0..1 right now)
* txrx - Identifies DMA_TX or DMA_RX for channel direction
* maxdescr - number of descriptors
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -672,101 +666,87 @@
int txrx,
int maxdescr)
{
- /*
- * Save away interesting stuff in the structure
+ /*
+ * Save away interesting stuff in the structure
*/
-
+
d->sbdma_eth = s;
d->sbdma_channel = chan;
d->sbdma_txdir = txrx;
-
+
#if 0
/* RMON clearing */
s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING;
#endif
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)), 0);
- SBMAC_WRITECSR(IOADDR(
- A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)), 0);
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)));
+ __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)));
- /*
- * initialize register pointers
+ /*
+ * initialize register pointers
*/
-
- d->sbdma_config0 =
+
+ d->sbdma_config0 =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0);
- d->sbdma_config1 =
+ d->sbdma_config1 =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1);
- d->sbdma_dscrbase =
+ d->sbdma_dscrbase =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE);
- d->sbdma_dscrcnt =
+ d->sbdma_dscrcnt =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT);
- d->sbdma_curdscr =
+ d->sbdma_curdscr =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR);
-
+
/*
* Allocate memory for the ring
*/
-
+
d->sbdma_maxdescr = maxdescr;
-
- d->sbdma_dscrtable = (sbdmadscr_t *)
- kmalloc(d->sbdma_maxdescr*sizeof(sbdmadscr_t), GFP_KERNEL);
-
+
+ d->sbdma_dscrtable = (sbdmadscr_t *)
+ kmalloc((d->sbdma_maxdescr+1)*sizeof(sbdmadscr_t), GFP_KERNEL);
+
+ /*
+ * The descriptor table must be aligned to at least 16 bytes or the
+ * MAC will corrupt it.
+ */
+ d->sbdma_dscrtable = (sbdmadscr_t *)
+ ALIGN((unsigned long)d->sbdma_dscrtable, sizeof(sbdmadscr_t));
+
memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t));
-
+
d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr;
-
+
d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable);
-
+
/*
* And context table
*/
-
- d->sbdma_ctxtable = (struct sk_buff **)
+
+ d->sbdma_ctxtable = (struct sk_buff **)
kmalloc(d->sbdma_maxdescr*sizeof(struct sk_buff *), GFP_KERNEL);
-
+
memset(d->sbdma_ctxtable,0,d->sbdma_maxdescr*sizeof(struct sk_buff *));
-
+
#ifdef CONFIG_SBMAC_COALESCE
/*
* Setup Rx/Tx DMA coalescing defaults
@@ -777,7 +757,7 @@
} else {
d->sbdma_int_pktcnt = 1;
}
-
+
if ( int_timeout ) {
d->sbdma_int_timeout = int_timeout;
} else {
@@ -789,13 +769,13 @@
/**********************************************************************
* SBDMA_CHANNEL_START(d)
- *
+ *
* Initialize the hardware registers for a DMA channel.
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel to init (context must be previously init'd
* rxtx - DMA_RX or DMA_TX depending on what type of channel
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -805,24 +785,21 @@
/*
* Turn on the DMA channel
*/
-
+
#ifdef CONFIG_SBMAC_COALESCE
- SBMAC_WRITECSR(d->sbdma_config1,
- V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) |
- 0);
- SBMAC_WRITECSR(d->sbdma_config0,
- M_DMA_EOP_INT_EN |
+ __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) |
+ 0, d->sbdma_config1);
+ __raw_writeq(M_DMA_EOP_INT_EN |
V_DMA_RINGSZ(d->sbdma_maxdescr) |
V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) |
- 0);
+ 0, d->sbdma_config0);
#else
- SBMAC_WRITECSR(d->sbdma_config1,0);
- SBMAC_WRITECSR(d->sbdma_config0,
- V_DMA_RINGSZ(d->sbdma_maxdescr) |
- 0);
+ __raw_writeq(0, d->sbdma_config1);
+ __raw_writeq(V_DMA_RINGSZ(d->sbdma_maxdescr) |
+ 0, d->sbdma_config0);
#endif
- SBMAC_WRITECSR(d->sbdma_dscrbase,d->sbdma_dscrtable_phys);
+ __raw_writeq(d->sbdma_dscrtable_phys, d->sbdma_dscrbase);
/*
* Initialize ring pointers
@@ -834,12 +811,12 @@
/**********************************************************************
* SBDMA_CHANNEL_STOP(d)
- *
+ *
* Initialize the hardware registers for a DMA channel.
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel to init (context must be previously init'd
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -849,44 +826,44 @@
/*
* Turn off the DMA channel
*/
-
- SBMAC_WRITECSR(d->sbdma_config1,0);
-
- SBMAC_WRITECSR(d->sbdma_dscrbase,0);
-
- SBMAC_WRITECSR(d->sbdma_config0,0);
-
+
+ __raw_writeq(0, d->sbdma_config1);
+
+ __raw_writeq(0, d->sbdma_dscrbase);
+
+ __raw_writeq(0, d->sbdma_config0);
+
/*
* Zero ring pointers
*/
-
- d->sbdma_addptr = 0;
- d->sbdma_remptr = 0;
+
+ d->sbdma_addptr = NULL;
+ d->sbdma_remptr = NULL;
}
static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
{
unsigned long addr;
unsigned long newaddr;
-
+
addr = (unsigned long) skb->data;
-
+
newaddr = (addr + power2 - 1) & ~(power2 - 1);
-
+
skb_reserve(skb,newaddr-addr+offset);
}
/**********************************************************************
* SBDMA_ADD_RCVBUFFER(d,sb)
- *
+ *
* Add a buffer to the specified DMA channel. For receive channels,
* this queues a buffer for inbound packets.
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel descriptor
* sb - sk_buff to add, or NULL if we should allocate one
- *
+ *
* Return value:
* 0 if buffer could not be added (ring is full)
* 1 if buffer added successfully
@@ -899,24 +876,24 @@
sbdmadscr_t *nextdsc;
struct sk_buff *sb_new = NULL;
int pktsize = ENET_PACKET_SIZE;
-
+
/* get pointer to our current place in the ring */
-
+
dsc = d->sbdma_addptr;
nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
-
+
/*
* figure out if the ring is full - if the next descriptor
* is the same as the one that we're going to remove from
* the ring, the ring is full
*/
-
+
if (nextdsc == d->sbdma_remptr) {
return -ENOSPC;
}
- /*
- * Allocate a sk_buff if we don't already have one.
+ /*
+ * Allocate a sk_buff if we don't already have one.
* If we do have an sk_buff, reset it so that it's empty.
*
* Note: sk_buffs don't seem to be guaranteed to have any sort
@@ -925,7 +902,7 @@
*
* 1. the data does not start in the middle of a cache line.
* 2. The data does not end in the middle of a cache line
- * 3. The buffer can be aligned such that the IP addresses are
+ * 3. The buffer can be aligned such that the IP addresses are
* naturally aligned.
*
* Remember, the SOCs MAC writes whole cache lines at a time,
@@ -933,7 +910,7 @@
* data portion starts in the middle of a cache line, the SOC
* DMA will trash the beginning (and ending) portions.
*/
-
+
if (sb == NULL) {
sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
if (sb_new == NULL) {
@@ -949,23 +926,22 @@
}
else {
sb_new = sb;
- /*
+ /*
* nothing special to reinit buffer, it's already aligned
* and sb->data already points to a good place.
*/
}
-
+
/*
- * fill in the descriptor
+ * fill in the descriptor
*/
-
+
#ifdef CONFIG_SBMAC_COALESCE
/*
* Do not interrupt per DMA transfer.
*/
dsc->dscr_a = virt_to_phys(sb_new->data) |
- V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
- 0;
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0;
#else
dsc->dscr_a = virt_to_phys(sb_new->data) |
V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
@@ -974,38 +950,38 @@
/* receiving: no options */
dsc->dscr_b = 0;
-
+
/*
- * fill in the context
+ * fill in the context
*/
-
+
d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new;
-
- /*
- * point at next packet
+
+ /*
+ * point at next packet
*/
-
+
d->sbdma_addptr = nextdsc;
-
- /*
+
+ /*
* Give the buffer to the DMA engine.
*/
-
- SBMAC_WRITECSR(d->sbdma_dscrcnt,1);
-
+
+ __raw_writeq(1, d->sbdma_dscrcnt);
+
return 0; /* we did it */
}
/**********************************************************************
* SBDMA_ADD_TXBUFFER(d,sb)
- *
+ *
* Add a transmit buffer to the specified DMA channel, causing a
* transmit to start.
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel descriptor
* sb - sk_buff to add
- *
+ *
* Return value:
* 0 transmit queued successfully
* otherwise error code
@@ -1019,70 +995,70 @@
uint64_t phys;
uint64_t ncb;
int length;
-
+
/* get pointer to our current place in the ring */
-
+
dsc = d->sbdma_addptr;
nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
-
+
/*
* figure out if the ring is full - if the next descriptor
* is the same as the one that we're going to remove from
* the ring, the ring is full
*/
-
+
if (nextdsc == d->sbdma_remptr) {
return -ENOSPC;
}
-
+
/*
* Under Linux, it's not necessary to copy/coalesce buffers
* like it is on NetBSD. We think they're all contiguous,
* but that may not be true for GBE.
*/
-
+
length = sb->len;
-
+
/*
* fill in the descriptor. Note that the number of cache
* blocks in the descriptor is the number of blocks
* *spanned*, so we need to add in the offset (if any)
* while doing the calculation.
*/
-
+
phys = virt_to_phys(sb->data);
ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1)));
- dsc->dscr_a = phys |
+ dsc->dscr_a = phys |
V_DMA_DSCRA_A_SIZE(ncb) |
#ifndef CONFIG_SBMAC_COALESCE
M_DMA_DSCRA_INTERRUPT |
#endif
M_DMA_ETHTX_SOP;
-
+
/* transmitting: set outbound options and length */
dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) |
V_DMA_DSCRB_PKT_SIZE(length);
-
+
/*
- * fill in the context
+ * fill in the context
*/
-
+
d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb;
-
- /*
- * point at next packet
+
+ /*
+ * point at next packet
*/
-
+
d->sbdma_addptr = nextdsc;
-
- /*
+
+ /*
* Give the buffer to the DMA engine.
*/
-
- SBMAC_WRITECSR(d->sbdma_dscrcnt,1);
-
+
+ __raw_writeq(1, d->sbdma_dscrcnt);
+
return 0; /* we did it */
}
@@ -1091,12 +1067,12 @@
/**********************************************************************
* SBDMA_EMPTYRING(d)
- *
+ *
* Free all allocated sk_buffs on the specified DMA channel;
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -1105,7 +1081,7 @@
{
int idx;
struct sk_buff *sb;
-
+
for (idx = 0; idx < d->sbdma_maxdescr; idx++) {
sb = d->sbdma_ctxtable[idx];
if (sb) {
@@ -1118,13 +1094,13 @@
/**********************************************************************
* SBDMA_FILLRING(d)
- *
+ *
* Fill the specified DMA channel (must be receive channel)
* with sk_buffs
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -1132,7 +1108,7 @@
static void sbdma_fillring(sbmacdma_t *d)
{
int idx;
-
+
for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
if (sbdma_add_rcvbuffer(d,NULL) != 0)
break;
@@ -1142,16 +1118,16 @@
/**********************************************************************
* SBDMA_RX_PROCESS(sc,d)
- *
- * Process "completed" receive buffers on the specified DMA channel.
- * Note that this isn't really ideal for priority channels, since
- * it processes all of the packets on a given channel before
- * returning.
*
- * Input parameters:
+ * Process "completed" receive buffers on the specified DMA channel.
+ * Note that this isn't really ideal for priority channels, since
+ * it processes all of the packets on a given channel before
+ * returning.
+ *
+ * Input parameters:
* sc - softc structure
* d - DMA channel context
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -1163,56 +1139,56 @@
sbdmadscr_t *dsc;
struct sk_buff *sb;
int len;
-
+
for (;;) {
- /*
+ /*
* figure out where we are (as an index) and where
* the hardware is (also as an index)
*
- * This could be done faster if (for example) the
+ * This could be done faster if (for example) the
* descriptor table was page-aligned and contiguous in
* both virtual and physical memory -- you could then
* just compare the low-order bits of the virtual address
* (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
*/
-
+
curidx = d->sbdma_remptr - d->sbdma_dscrtable;
- hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
+ hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
-
+
/*
* If they're the same, that means we've processed all
* of the descriptors up to (but not including) the one that
* the hardware is working on right now.
*/
-
+
if (curidx == hwidx)
break;
-
+
/*
* Otherwise, get the packet's sk_buff ptr back
*/
-
+
dsc = &(d->sbdma_dscrtable[curidx]);
sb = d->sbdma_ctxtable[curidx];
d->sbdma_ctxtable[curidx] = NULL;
-
+
len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4;
-
+
/*
* Check packet status. If good, process it.
* If not, silently drop it and put it back on the
* receive ring.
*/
-
+
if (!(dsc->dscr_a & M_DMA_ETHRX_BAD)) {
-
+
/*
* Add a new buffer to replace the old one. If we fail
* to allocate a buffer, we're going to drop this
* packet and put it right back on the receive ring.
*/
-
+
if (sbdma_add_rcvbuffer(d,NULL) == -ENOBUFS) {
sc->sbm_stats.rx_dropped++;
sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
@@ -1221,7 +1197,7 @@
* Set length into the packet
*/
skb_put(sb,len);
-
+
/*
* Buffer has been replaced on the
* receive ring. Pass the buffer to
@@ -1240,7 +1216,7 @@
sb->ip_summed = CHECKSUM_NONE;
}
}
-
+
netif_rx(sb);
}
} else {
@@ -1251,14 +1227,14 @@
sc->sbm_stats.rx_errors++;
sbdma_add_rcvbuffer(d,sb);
}
-
-
- /*
+
+
+ /*
* .. and advance to the next buffer.
*/
-
+
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
-
+
}
}
@@ -1266,17 +1242,17 @@
/**********************************************************************
* SBDMA_TX_PROCESS(sc,d)
- *
- * Process "completed" transmit buffers on the specified DMA channel.
+ *
+ * Process "completed" transmit buffers on the specified DMA channel.
* This is normally called within the interrupt service routine.
* Note that this isn't really ideal for priority channels, since
- * it processes all of the packets on a given channel before
- * returning.
+ * it processes all of the packets on a given channel before
+ * returning.
*
- * Input parameters:
+ * Input parameters:
* sc - softc structure
* d - DMA channel context
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -1290,21 +1266,21 @@
unsigned long flags;
spin_lock_irqsave(&(sc->sbm_lock), flags);
-
+
for (;;) {
- /*
+ /*
* figure out where we are (as an index) and where
* the hardware is (also as an index)
*
- * This could be done faster if (for example) the
+ * This could be done faster if (for example) the
* descriptor table was page-aligned and contiguous in
* both virtual and physical memory -- you could then
* just compare the low-order bits of the virtual address
* (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
*/
-
+
curidx = d->sbdma_remptr - d->sbdma_dscrtable;
- hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
+ hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
/*
@@ -1312,75 +1288,75 @@
* of the descriptors up to (but not including) the one that
* the hardware is working on right now.
*/
-
+
if (curidx == hwidx)
break;
-
+
/*
* Otherwise, get the packet's sk_buff ptr back
*/
-
+
dsc = &(d->sbdma_dscrtable[curidx]);
sb = d->sbdma_ctxtable[curidx];
d->sbdma_ctxtable[curidx] = NULL;
-
+
/*
* Stats
*/
-
+
sc->sbm_stats.tx_bytes += sb->len;
sc->sbm_stats.tx_packets++;
-
+
/*
* for transmits, we just free buffers.
*/
-
+
dev_kfree_skb_irq(sb);
-
- /*
+
+ /*
* .. and advance to the next buffer.
*/
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
-
+
}
-
+
/*
* Decide if we should wake up the protocol or not.
* Other drivers seem to do this when we reach a low
* watermark on the transmit queue.
*/
-
+
netif_wake_queue(d->sbdma_eth->sbm_dev);
-
+
spin_unlock_irqrestore(&(sc->sbm_lock), flags);
-
+
}
/**********************************************************************
* SBMAC_INITCTX(s)
- *
+ *
* Initialize an Ethernet context structure - this is called
* once per MAC on the 1250. Memory is allocated here, so don't
* call it again from inside the ioctl routines that bring the
* interface up/down
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac context structure
- *
+ *
* Return value:
* 0
********************************************************************* */
static int sbmac_initctx(struct sbmac_softc *s)
{
-
- /*
- * figure out the addresses of some ports
+
+ /*
+ * figure out the addresses of some ports
*/
-
+
s->sbm_macenable = s->sbm_base + R_MAC_ENABLE;
s->sbm_maccfg = s->sbm_base + R_MAC_CFG;
s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG;
@@ -1397,29 +1373,29 @@
s->sbm_phy_oldanlpar = 0;
s->sbm_phy_oldk1stsr = 0;
s->sbm_phy_oldlinkstat = 0;
-
+
/*
* Initialize the DMA channels. Right now, only one per MAC is used
* Note: Only do this _once_, as it allocates memory from the kernel!
*/
-
+
sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR);
sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR);
-
+
/*
* initial state is OFF
*/
-
+
s->sbm_state = sbmac_state_off;
-
+
/*
* Initial speed is (XXX TEMP) 10MBit/s HDX no FC
*/
-
+
s->sbm_speed = sbmac_speed_10;
s->sbm_duplex = sbmac_duplex_half;
s->sbm_fc = sbmac_fc_disabled;
-
+
return 0;
}
@@ -1430,7 +1406,7 @@
kfree(d->sbdma_dscrtable);
d->sbdma_dscrtable = NULL;
}
-
+
if (d->sbdma_ctxtable) {
kfree(d->sbdma_ctxtable);
d->sbdma_ctxtable = NULL;
@@ -1447,12 +1423,12 @@
/**********************************************************************
* SBMAC_CHANNEL_START(s)
- *
+ *
* Start packet processing on this MAC.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -1460,49 +1436,49 @@
static void sbmac_channel_start(struct sbmac_softc *s)
{
uint64_t reg;
- sbmac_port_t port;
+ volatile void __iomem *port;
uint64_t cfg,fifo,framecfg;
int idx, th_value;
-
+
/*
* Don't do this if running
*/
if (s->sbm_state == sbmac_state_on)
return;
-
+
/*
* Bring the controller out of reset, but leave it off.
*/
-
- SBMAC_WRITECSR(s->sbm_macenable,0);
-
+
+ __raw_writeq(0, s->sbm_macenable);
+
/*
* Ignore all received packets
*/
-
- SBMAC_WRITECSR(s->sbm_rxfilter,0);
-
- /*
+
+ __raw_writeq(0, s->sbm_rxfilter);
+
+ /*
* Calculate values for various control registers.
*/
-
+
cfg = M_MAC_RETRY_EN |
- M_MAC_TX_HOLD_SOP_EN |
+ M_MAC_TX_HOLD_SOP_EN |
V_MAC_TX_PAUSE_CNT_16K |
M_MAC_AP_STAT_EN |
M_MAC_FAST_SYNC |
M_MAC_SS_EN |
0;
-
- /*
+
+ /*
* Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars
* and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
* Use a larger RD_THRSH for gigabit
*/
- if (periph_rev >= 2)
+ if (periph_rev >= 2)
th_value = 64;
- else
+ else
th_value = 28;
fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */
@@ -1520,51 +1496,51 @@
V_MAC_BACKOFF_SEL(1);
/*
- * Clear out the hash address map
+ * Clear out the hash address map
*/
-
+
port = s->sbm_base + R_MAC_HASH_BASE;
for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
- SBMAC_WRITECSR(port,0);
+ __raw_writeq(0, port);
port += sizeof(uint64_t);
}
-
+
/*
* Clear out the exact-match table
*/
-
+
port = s->sbm_base + R_MAC_ADDR_BASE;
for (idx = 0; idx < MAC_ADDR_COUNT; idx++) {
- SBMAC_WRITECSR(port,0);
+ __raw_writeq(0, port);
port += sizeof(uint64_t);
}
-
+
/*
* Clear out the DMA Channel mapping table registers
*/
-
+
port = s->sbm_base + R_MAC_CHUP0_BASE;
for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
- SBMAC_WRITECSR(port,0);
+ __raw_writeq(0, port);
port += sizeof(uint64_t);
}
port = s->sbm_base + R_MAC_CHLO0_BASE;
for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
- SBMAC_WRITECSR(port,0);
+ __raw_writeq(0, port);
port += sizeof(uint64_t);
}
-
+
/*
* Program the hardware address. It goes into the hardware-address
* register as well as the first filter register.
*/
-
+
reg = sbmac_addr2reg(s->sbm_hwaddr);
-
+
port = s->sbm_base + R_MAC_ADDR_BASE;
- SBMAC_WRITECSR(port,reg);
+ __raw_writeq(reg, port);
port = s->sbm_base + R_MAC_ETHERNET_ADDR;
#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
@@ -1573,108 +1549,105 @@
* destination address in the R_MAC_ETHERNET_ADDR register.
* Set the value to zero.
*/
- SBMAC_WRITECSR(port,0);
+ __raw_writeq(0, port);
#else
- SBMAC_WRITECSR(port,reg);
+ __raw_writeq(reg, port);
#endif
-
+
/*
* Set the receive filter for no packets, and write values
* to the various config registers
*/
-
- SBMAC_WRITECSR(s->sbm_rxfilter,0);
- SBMAC_WRITECSR(s->sbm_imr,0);
- SBMAC_WRITECSR(s->sbm_framecfg,framecfg);
- SBMAC_WRITECSR(s->sbm_fifocfg,fifo);
- SBMAC_WRITECSR(s->sbm_maccfg,cfg);
-
+
+ __raw_writeq(0, s->sbm_rxfilter);
+ __raw_writeq(0, s->sbm_imr);
+ __raw_writeq(framecfg, s->sbm_framecfg);
+ __raw_writeq(fifo, s->sbm_fifocfg);
+ __raw_writeq(cfg, s->sbm_maccfg);
+
/*
* Initialize DMA channels (rings should be ok now)
*/
-
+
sbdma_channel_start(&(s->sbm_rxdma), DMA_RX);
sbdma_channel_start(&(s->sbm_txdma), DMA_TX);
-
+
/*
* Configure the speed, duplex, and flow control
*/
sbmac_set_speed(s,s->sbm_speed);
sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc);
-
+
/*
* Fill the receive ring
*/
-
+
sbdma_fillring(&(s->sbm_rxdma));
-
- /*
+
+ /*
* Turn on the rest of the bits in the enable register
- */
-
- SBMAC_WRITECSR(s->sbm_macenable,
- M_MAC_RXDMA_EN0 |
+ */
+
+ __raw_writeq(M_MAC_RXDMA_EN0 |
M_MAC_TXDMA_EN0 |
M_MAC_RX_ENABLE |
- M_MAC_TX_ENABLE);
-
-
+ M_MAC_TX_ENABLE, s->sbm_macenable);
+
+
#ifdef CONFIG_SBMAC_COALESCE
/*
* Accept any TX interrupt and EOP count/timer RX interrupts on ch 0
*/
- SBMAC_WRITECSR(s->sbm_imr,
- ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
- ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0));
+ __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
+ ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), s->sbm_imr);
#else
/*
* Accept any kind of interrupt on TX and RX DMA channel 0
*/
- SBMAC_WRITECSR(s->sbm_imr,
- (M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
- (M_MAC_INT_CHANNEL << S_MAC_RX_CH0));
+ __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
+ (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr);
#endif
-
- /*
- * Enable receiving unicasts and broadcasts
- */
-
- SBMAC_WRITECSR(s->sbm_rxfilter,M_MAC_UCAST_EN | M_MAC_BCAST_EN);
-
+
/*
- * we're running now.
+ * Enable receiving unicasts and broadcasts
*/
-
+
+ __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter);
+
+ /*
+ * we're running now.
+ */
+
s->sbm_state = sbmac_state_on;
-
- /*
- * Program multicast addresses
+
+ /*
+ * Program multicast addresses
*/
-
+
sbmac_setmulti(s);
-
- /*
- * If channel was in promiscuous mode before, turn that on
+
+ /*
+ * If channel was in promiscuous mode before, turn that on
*/
-
+
if (s->sbm_devflags & IFF_PROMISC) {
sbmac_promiscuous_mode(s,1);
}
-
+
}
/**********************************************************************
* SBMAC_CHANNEL_STOP(s)
- *
+ *
* Stop packet processing on this MAC.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -1682,49 +1655,49 @@
static void sbmac_channel_stop(struct sbmac_softc *s)
{
/* don't do this if already stopped */
-
+
if (s->sbm_state == sbmac_state_off)
return;
-
+
/* don't accept any packets, disable all interrupts */
-
- SBMAC_WRITECSR(s->sbm_rxfilter,0);
- SBMAC_WRITECSR(s->sbm_imr,0);
-
+
+ __raw_writeq(0, s->sbm_rxfilter);
+ __raw_writeq(0, s->sbm_imr);
+
/* Turn off ticker */
-
+
/* XXX */
-
+
/* turn off receiver and transmitter */
-
- SBMAC_WRITECSR(s->sbm_macenable,0);
-
+
+ __raw_writeq(0, s->sbm_macenable);
+
/* We're stopped now. */
-
+
s->sbm_state = sbmac_state_off;
-
+
/*
* Stop DMA channels (rings should be ok now)
*/
-
+
sbdma_channel_stop(&(s->sbm_rxdma));
sbdma_channel_stop(&(s->sbm_txdma));
-
+
/* Empty the receive and transmit rings */
-
+
sbdma_emptyring(&(s->sbm_rxdma));
sbdma_emptyring(&(s->sbm_txdma));
-
+
}
/**********************************************************************
* SBMAC_SET_CHANNEL_STATE(state)
- *
+ *
* Set the channel's state ON or OFF
- *
- * Input parameters:
+ *
+ * Input parameters:
* state - new state
- *
+ *
* Return value:
* old state
********************************************************************* */
@@ -1732,43 +1705,43 @@
sbmac_state_t state)
{
sbmac_state_t oldstate = sc->sbm_state;
-
+
/*
* If same as previous state, return
*/
-
+
if (state == oldstate) {
return oldstate;
}
-
+
/*
- * If new state is ON, turn channel on
+ * If new state is ON, turn channel on
*/
-
+
if (state == sbmac_state_on) {
sbmac_channel_start(sc);
}
else {
sbmac_channel_stop(sc);
}
-
+
/*
* Return previous state
*/
-
+
return oldstate;
}
/**********************************************************************
* SBMAC_PROMISCUOUS_MODE(sc,onoff)
- *
+ *
* Turn on or off promiscuous mode
- *
- * Input parameters:
+ *
+ * Input parameters:
* sc - softc
* onoff - 1 to turn on, 0 to turn off
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -1776,30 +1749,30 @@
static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff)
{
uint64_t reg;
-
+
if (sc->sbm_state != sbmac_state_on)
return;
-
+
if (onoff) {
- reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg = __raw_readq(sc->sbm_rxfilter);
reg |= M_MAC_ALLPKT_EN;
- SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
- }
+ __raw_writeq(reg, sc->sbm_rxfilter);
+ }
else {
- reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg = __raw_readq(sc->sbm_rxfilter);
reg &= ~M_MAC_ALLPKT_EN;
- SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+ __raw_writeq(reg, sc->sbm_rxfilter);
}
}
/**********************************************************************
* SBMAC_SETIPHDR_OFFSET(sc,onoff)
- *
+ *
* Set the iphdr offset as 15 assuming ethernet encapsulation
- *
- * Input parameters:
+ *
+ * Input parameters:
* sc - softc
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -1807,12 +1780,12 @@
static void sbmac_set_iphdr_offset(struct sbmac_softc *sc)
{
uint64_t reg;
-
+
/* Hard code the off set to 15 for now */
- reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg = __raw_readq(sc->sbm_rxfilter);
reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
- SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
-
+ __raw_writeq(reg, sc->sbm_rxfilter);
+
/* read system identification to determine revision */
if (periph_rev >= 2) {
sc->rx_hw_checksum = ENABLE;
@@ -1824,13 +1797,13 @@
/**********************************************************************
* SBMAC_ADDR2REG(ptr)
- *
+ *
* Convert six bytes into the 64-bit register value that
* we typically write into the SBMAC's address/mcast registers
- *
- * Input parameters:
+ *
+ * Input parameters:
* ptr - pointer to 6 bytes
- *
+ *
* Return value:
* register value
********************************************************************* */
@@ -1838,35 +1811,35 @@
static uint64_t sbmac_addr2reg(unsigned char *ptr)
{
uint64_t reg = 0;
-
+
ptr += 6;
-
- reg |= (uint64_t) *(--ptr);
+
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
-
+ reg |= (uint64_t) *(--ptr);
+
return reg;
}
/**********************************************************************
* SBMAC_SET_SPEED(s,speed)
- *
+ *
* Configure LAN speed for the specified MAC.
* Warning: must be called when MAC is off!
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* speed - speed to set MAC to (see sbmac_speed_t enum)
- *
+ *
* Return value:
* 1 if successful
* 0 indicates invalid parameters
@@ -1880,31 +1853,31 @@
/*
* Save new current values
*/
-
+
s->sbm_speed = speed;
-
+
if (s->sbm_state == sbmac_state_on)
return 0; /* save for next restart */
/*
- * Read current register values
+ * Read current register values
*/
-
- cfg = SBMAC_READCSR(s->sbm_maccfg);
- framecfg = SBMAC_READCSR(s->sbm_framecfg);
-
+
+ cfg = __raw_readq(s->sbm_maccfg);
+ framecfg = __raw_readq(s->sbm_framecfg);
+
/*
* Mask out the stuff we want to change
*/
-
+
cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL);
framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH |
M_MAC_SLOT_SIZE);
-
+
/*
* Now add in the new bits
*/
-
+
switch (speed) {
case sbmac_speed_10:
framecfg |= V_MAC_IFG_RX_10 |
@@ -1913,7 +1886,7 @@
V_MAC_SLOT_SIZE_10;
cfg |= V_MAC_SPEED_SEL_10MBPS;
break;
-
+
case sbmac_speed_100:
framecfg |= V_MAC_IFG_RX_100 |
V_MAC_IFG_TX_100 |
@@ -1921,7 +1894,7 @@
V_MAC_SLOT_SIZE_100;
cfg |= V_MAC_SPEED_SEL_100MBPS ;
break;
-
+
case sbmac_speed_1000:
framecfg |= V_MAC_IFG_RX_1000 |
V_MAC_IFG_TX_1000 |
@@ -1929,34 +1902,34 @@
V_MAC_SLOT_SIZE_1000;
cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN;
break;
-
+
case sbmac_speed_auto: /* XXX not implemented */
/* fall through */
default:
return 0;
}
-
+
/*
- * Send the bits back to the hardware
+ * Send the bits back to the hardware
*/
-
- SBMAC_WRITECSR(s->sbm_framecfg,framecfg);
- SBMAC_WRITECSR(s->sbm_maccfg,cfg);
-
+
+ __raw_writeq(framecfg, s->sbm_framecfg);
+ __raw_writeq(cfg, s->sbm_maccfg);
+
return 1;
}
/**********************************************************************
* SBMAC_SET_DUPLEX(s,duplex,fc)
- *
+ *
* Set Ethernet duplex and flow control options for this MAC
* Warning: must be called when MAC is off!
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* duplex - duplex setting (see sbmac_duplex_t)
* fc - flow control setting (see sbmac_fc_t)
- *
+ *
* Return value:
* 1 if ok
* 0 if an invalid parameter combination was specified
@@ -1965,67 +1938,67 @@
static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc)
{
uint64_t cfg;
-
+
/*
* Save new current values
*/
-
+
s->sbm_duplex = duplex;
s->sbm_fc = fc;
-
+
if (s->sbm_state == sbmac_state_on)
return 0; /* save for next restart */
-
+
/*
- * Read current register values
+ * Read current register values
*/
-
- cfg = SBMAC_READCSR(s->sbm_maccfg);
-
+
+ cfg = __raw_readq(s->sbm_maccfg);
+
/*
* Mask off the stuff we're about to change
*/
-
+
cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN);
-
-
+
+
switch (duplex) {
case sbmac_duplex_half:
switch (fc) {
case sbmac_fc_disabled:
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED;
break;
-
+
case sbmac_fc_collision:
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED;
break;
-
+
case sbmac_fc_carrier:
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR;
break;
-
+
case sbmac_fc_auto: /* XXX not implemented */
- /* fall through */
+ /* fall through */
case sbmac_fc_frame: /* not valid in half duplex */
default: /* invalid selection */
return 0;
}
break;
-
+
case sbmac_duplex_full:
switch (fc) {
case sbmac_fc_disabled:
cfg |= V_MAC_FC_CMD_DISABLED;
break;
-
+
case sbmac_fc_frame:
cfg |= V_MAC_FC_CMD_ENABLED;
break;
-
+
case sbmac_fc_collision: /* not valid in full duplex */
case sbmac_fc_carrier: /* not valid in full duplex */
case sbmac_fc_auto: /* XXX not implemented */
- /* fall through */
+ /* fall through */
default:
return 0;
}
@@ -2034,13 +2007,13 @@
/* XXX not implemented */
break;
}
-
+
/*
- * Send the bits back to the hardware
+ * Send the bits back to the hardware
*/
-
- SBMAC_WRITECSR(s->sbm_maccfg,cfg);
-
+
+ __raw_writeq(cfg, s->sbm_maccfg);
+
return 1;
}
@@ -2049,12 +2022,12 @@
/**********************************************************************
* SBMAC_INTR()
- *
+ *
* Interrupt handler for MAC interrupts
- *
- * Input parameters:
+ *
+ * Input parameters:
* MAC structure
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -2066,27 +2039,27 @@
int handled = 0;
for (;;) {
-
+
/*
* Read the ISR (this clears the bits in the real
* register, except for counter addr)
*/
-
- isr = SBMAC_READCSR(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR;
-
+
+ isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR;
+
if (isr == 0)
break;
handled = 1;
-
+
/*
* Transmits on channel 0
*/
-
+
if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) {
sbdma_tx_process(sc,&(sc->sbm_txdma));
}
-
+
/*
* Receives on channel 0
*/
@@ -2106,8 +2079,8 @@
* EOP_SEEN here takes care of this case.
* (EOP_SEEN is part of M_MAC_INT_CHANNEL << S_MAC_RX_CH0)
*/
-
-
+
+
if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) {
sbdma_rx_process(sc,&(sc->sbm_rxdma));
}
@@ -2118,29 +2091,29 @@
/**********************************************************************
* SBMAC_START_TX(skb,dev)
- *
- * Start output on the specified interface. Basically, we
+ *
+ * Start output on the specified interface. Basically, we
* queue as many buffers as we can until the ring fills up, or
* we run off the end of the queue, whichever comes first.
- *
- * Input parameters:
- *
- *
+ *
+ * Input parameters:
+ *
+ *
* Return value:
* nothing
********************************************************************* */
static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
-
+
/* lock eth irq */
spin_lock_irq (&sc->sbm_lock);
-
+
/*
- * Put the buffer on the transmit ring. If we
+ * Put the buffer on the transmit ring. If we
* don't have room, stop the queue.
*/
-
+
if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) {
/* XXX save skb that we could not send */
netif_stop_queue(dev);
@@ -2148,24 +2121,24 @@
return 1;
}
-
+
dev->trans_start = jiffies;
-
+
spin_unlock_irq (&sc->sbm_lock);
-
+
return 0;
}
/**********************************************************************
* SBMAC_SETMULTI(sc)
- *
+ *
* Reprogram the multicast table into the hardware, given
* the list of multicasts associated with the interface
* structure.
- *
- * Input parameters:
+ *
+ * Input parameters:
* sc - softc
- *
+ *
* Return value:
* nothing
********************************************************************* */
@@ -2173,75 +2146,75 @@
static void sbmac_setmulti(struct sbmac_softc *sc)
{
uint64_t reg;
- sbmac_port_t port;
+ volatile void __iomem *port;
int idx;
struct dev_mc_list *mclist;
struct net_device *dev = sc->sbm_dev;
-
- /*
+
+ /*
* Clear out entire multicast table. We do this by nuking
* the entire hash table and all the direct matches except
- * the first one, which is used for our station address
+ * the first one, which is used for our station address
*/
-
+
for (idx = 1; idx < MAC_ADDR_COUNT; idx++) {
port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t));
- SBMAC_WRITECSR(port,0);
+ __raw_writeq(0, port);
}
-
+
for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t));
- SBMAC_WRITECSR(port,0);
+ __raw_writeq(0, port);
}
-
+
/*
* Clear the filter to say we don't want any multicasts.
*/
-
- reg = SBMAC_READCSR(sc->sbm_rxfilter);
+
+ reg = __raw_readq(sc->sbm_rxfilter);
reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN);
- SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
-
+ __raw_writeq(reg, sc->sbm_rxfilter);
+
if (dev->flags & IFF_ALLMULTI) {
- /*
- * Enable ALL multicasts. Do this by inverting the
- * multicast enable bit.
+ /*
+ * Enable ALL multicasts. Do this by inverting the
+ * multicast enable bit.
*/
- reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg = __raw_readq(sc->sbm_rxfilter);
reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN);
- SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+ __raw_writeq(reg, sc->sbm_rxfilter);
return;
}
-
- /*
+
+ /*
* Progam new multicast entries. For now, only use the
* perfect filter. In the future we'll need to use the
* hash filter if the perfect filter overflows
*/
-
+
/* XXX only using perfect filter for now, need to use hash
* XXX if the table overflows */
-
+
idx = 1; /* skip station address */
mclist = dev->mc_list;
while (mclist && (idx < MAC_ADDR_COUNT)) {
reg = sbmac_addr2reg(mclist->dmi_addr);
port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t));
- SBMAC_WRITECSR(port,reg);
+ __raw_writeq(reg, port);
idx++;
mclist = mclist->next;
}
-
- /*
+
+ /*
* Enable the "accept multicast bits" if we programmed at least one
- * multicast.
+ * multicast.
*/
-
+
if (idx > 1) {
- reg = SBMAC_READCSR(sc->sbm_rxfilter);
+ reg = __raw_readq(sc->sbm_rxfilter);
reg |= M_MAC_MCAST_EN;
- SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
+ __raw_writeq(reg, sc->sbm_rxfilter);
}
}
@@ -2250,12 +2223,12 @@
#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
/**********************************************************************
* SBMAC_PARSE_XDIGIT(str)
- *
+ *
* Parse a hex digit, returning its value
- *
- * Input parameters:
+ *
+ * Input parameters:
* str - character
- *
+ *
* Return value:
* hex value, or -1 if invalid
********************************************************************* */
@@ -2263,7 +2236,7 @@
static int sbmac_parse_xdigit(char str)
{
int digit;
-
+
if ((str >= '0') && (str <= '9'))
digit = str - '0';
else if ((str >= 'a') && (str <= 'f'))
@@ -2272,20 +2245,20 @@
digit = str - 'A' + 10;
else
return -1;
-
+
return digit;
}
/**********************************************************************
* SBMAC_PARSE_HWADDR(str,hwaddr)
- *
+ *
* Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte
* Ethernet address.
- *
- * Input parameters:
+ *
+ * Input parameters:
* str - string
* hwaddr - pointer to hardware address
- *
+ *
* Return value:
* 0 if ok, else -1
********************************************************************* */
@@ -2294,7 +2267,7 @@
{
int digit1,digit2;
int idx = 6;
-
+
while (*str && (idx > 0)) {
digit1 = sbmac_parse_xdigit(*str);
if (digit1 < 0)
@@ -2302,7 +2275,7 @@
str++;
if (!*str)
return -1;
-
+
if ((*str == ':') || (*str == '-')) {
digit2 = digit1;
digit1 = 0;
@@ -2313,10 +2286,10 @@
return -1;
str++;
}
-
+
*hwaddr++ = (digit1 << 4) | digit2;
idx--;
-
+
if (*str == '-')
str++;
if (*str == ':')
@@ -2337,12 +2310,12 @@
/**********************************************************************
* SBMAC_INIT(dev)
- *
+ *
* Attach routine - init hardware and hook ourselves into linux
- *
- * Input parameters:
+ *
+ * Input parameters:
* dev - net_device structure
- *
+ *
* Return value:
* status
********************************************************************* */
@@ -2354,53 +2327,53 @@
uint64_t ea_reg;
int i;
int err;
-
+
sc = netdev_priv(dev);
-
+
/* Determine controller base address */
-
+
sc->sbm_base = IOADDR(dev->base_addr);
sc->sbm_dev = dev;
sc->sbe_idx = idx;
-
+
eaddr = sc->sbm_hwaddr;
-
- /*
+
+ /*
* Read the ethernet address. The firwmare left this programmed
* for us in the ethernet address register for each mac.
*/
-
- ea_reg = SBMAC_READCSR(sc->sbm_base + R_MAC_ETHERNET_ADDR);
- SBMAC_WRITECSR(sc->sbm_base + R_MAC_ETHERNET_ADDR, 0);
+
+ ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR);
+ __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR);
for (i = 0; i < 6; i++) {
eaddr[i] = (uint8_t) (ea_reg & 0xFF);
ea_reg >>= 8;
}
-
+
for (i = 0; i < 6; i++) {
dev->dev_addr[i] = eaddr[i];
}
-
-
+
+
/*
- * Init packet size
+ * Init packet size
*/
-
+
sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
- /*
+ /*
* Initialize context (get pointers to registers and stuff), then
* allocate the memory for the descriptor tables.
*/
-
+
sbmac_initctx(sc);
-
+
/*
* Set up Linux device callins
*/
-
+
spin_lock_init(&(sc->sbm_lock));
-
+
dev->open = sbmac_open;
dev->hard_start_xmit = sbmac_start_tx;
dev->stop = sbmac_close;
@@ -2419,7 +2392,7 @@
if (err)
goto out_uninit;
- if (periph_rev >= 2) {
+ if (sc->rx_hw_checksum == ENABLE) {
printk(KERN_INFO "%s: enabling TCP rcv checksum\n",
sc->sbm_dev->name);
}
@@ -2430,10 +2403,10 @@
* was being displayed)
*/
printk(KERN_INFO
- "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n",
dev->name, dev->base_addr,
eaddr[0],eaddr[1],eaddr[2],eaddr[3],eaddr[4],eaddr[5]);
-
+
return 0;
@@ -2447,54 +2420,86 @@
static int sbmac_open(struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
-
+
if (debug > 1) {
printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq);
}
-
- /*
+
+ /*
* map/route interrupt (clear status first, in case something
* weird is pending; we haven't initialized the mac registers
* yet)
*/
- SBMAC_READCSR(sc->sbm_isr);
+ __raw_readq(sc->sbm_isr);
if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev))
return -EBUSY;
/*
- * Configure default speed
+ * Probe phy address
+ */
+
+ if(sbmac_mii_probe(dev) == -1) {
+ printk("%s: failed to probe PHY.\n", dev->name);
+ return -EINVAL;
+ }
+
+ /*
+ * Configure default speed
*/
sbmac_mii_poll(sc,noisy_mii);
-
+
/*
* Turn on the channel
*/
sbmac_set_channel_state(sc,sbmac_state_on);
-
+
/*
* XXX Station address is in dev->dev_addr
*/
-
+
if (dev->if_port == 0)
- dev->if_port = 0;
-
+ dev->if_port = 0;
+
netif_start_queue(dev);
-
+
sbmac_set_rx_mode(dev);
-
+
/* Set the timer to check for link beat. */
init_timer(&sc->sbm_timer);
sc->sbm_timer.expires = jiffies + 2 * HZ/100;
sc->sbm_timer.data = (unsigned long)dev;
sc->sbm_timer.function = &sbmac_timer;
add_timer(&sc->sbm_timer);
-
+
return 0;
}
+static int sbmac_mii_probe(struct net_device *dev)
+{
+ int i;
+ struct sbmac_softc *s = netdev_priv(dev);
+ u16 bmsr, id1, id2;
+ u32 vendor, device;
+
+ for (i=1; i<31; i++) {
+ bmsr = sbmac_mii_read(s, i, MII_BMSR);
+ if (bmsr != 0) {
+ s->sbm_phys[0] = i;
+ id1 = sbmac_mii_read(s, i, MII_PHYIDR1);
+ id2 = sbmac_mii_read(s, i, MII_PHYIDR2);
+ vendor = ((u32)id1 << 6) | ((id2 >> 10) & 0x3f);
+ device = (id2 >> 4) & 0x3f;
+
+ printk(KERN_INFO "%s: found phy %d, vendor %06x part %02x\n",
+ dev->name, i, vendor, device);
+ return i;
+ }
+ }
+ return -1;
+}
static int sbmac_mii_poll(struct sbmac_softc *s,int noisy)
@@ -2609,20 +2614,20 @@
int mii_status;
spin_lock_irq (&sc->sbm_lock);
-
+
/* make IFF_RUNNING follow the MII status bit "Link established" */
mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR);
-
+
if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) {
sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT;
if (mii_status & BMSR_LINKSTAT) {
netif_carrier_on(dev);
}
else {
- netif_carrier_off(dev);
+ netif_carrier_off(dev);
}
}
-
+
/*
* Poll the PHY to see what speed we should be running at
*/
@@ -2640,9 +2645,9 @@
sbmac_channel_start(sc);
}
}
-
+
spin_unlock_irq (&sc->sbm_lock);
-
+
sc->sbm_timer.expires = jiffies + next_tick;
add_timer(&sc->sbm_timer);
}
@@ -2651,13 +2656,13 @@
static void sbmac_tx_timeout (struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
-
+
spin_lock_irq (&sc->sbm_lock);
-
-
+
+
dev->trans_start = jiffies;
sc->sbm_stats.tx_errors++;
-
+
spin_unlock_irq (&sc->sbm_lock);
printk (KERN_WARNING "%s: Transmit timed out\n",dev->name);
@@ -2670,13 +2675,13 @@
{
struct sbmac_softc *sc = netdev_priv(dev);
unsigned long flags;
-
+
spin_lock_irqsave(&sc->sbm_lock, flags);
-
+
/* XXX update other stats here */
-
+
spin_unlock_irqrestore(&sc->sbm_lock, flags);
-
+
return &sc->sbm_stats;
}
@@ -2693,8 +2698,8 @@
/*
* Promiscuous changed.
*/
-
- if (dev->flags & IFF_PROMISC) {
+
+ if (dev->flags & IFF_PROMISC) {
/* Unconditionally log net taps. */
msg_flag = 1;
sbmac_promiscuous_mode(sc,1);
@@ -2705,18 +2710,18 @@
}
}
spin_unlock_irqrestore(&sc->sbm_lock, flags);
-
+
if (msg_flag) {
printk(KERN_NOTICE "%s: Promiscuous mode %sabled.\n",
dev->name,(msg_flag==1)?"en":"dis");
}
-
+
/*
* Program the multicasts. Do this every time.
*/
-
+
sbmac_setmulti(sc);
-
+
}
static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
@@ -2725,10 +2730,10 @@
u16 *data = (u16 *)&rq->ifr_ifru;
unsigned long flags;
int retval;
-
+
spin_lock_irqsave(&sc->sbm_lock, flags);
retval = 0;
-
+
switch(cmd) {
case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
data[0] = sc->sbm_phys[0] & 0x1f;
@@ -2750,7 +2755,7 @@
default:
retval = -EOPNOTSUPP;
}
-
+
spin_unlock_irqrestore(&sc->sbm_lock, flags);
return retval;
}
@@ -2781,7 +2786,7 @@
sbdma_emptyring(&(sc->sbm_txdma));
sbdma_emptyring(&(sc->sbm_rxdma));
-
+
return 0;
}
@@ -2793,13 +2798,13 @@
{
uint8_t eaddr[6];
uint64_t val;
- sbmac_port_t port;
+ unsigned long port;
port = A_MAC_CHANNEL_BASE(chan);
sbmac_parse_hwaddr(addr,eaddr);
val = sbmac_addr2reg(eaddr);
- SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR),val);
- val = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR));
+ __raw_writeq(val, IOADDR(port+R_MAC_ETHERNET_ADDR));
+ val = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR));
}
#endif
@@ -2810,9 +2815,9 @@
{
int idx;
struct net_device *dev;
- sbmac_port_t port;
+ unsigned long port;
int chip_max_units;
-
+
/*
* For bringup when not using the firmware, we can pre-fill
* the MAC addresses using the environment variables
@@ -2858,13 +2863,13 @@
port = A_MAC_CHANNEL_BASE(idx);
- /*
+ /*
* The R_MAC_ETHERNET_ADDR register will be set to some nonzero
* value for us by the firmware if we're going to use this MAC.
* If we find a zero, skip this MAC.
*/
- sbmac_orig_hwaddr[idx] = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR));
+ sbmac_orig_hwaddr[idx] = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR));
if (sbmac_orig_hwaddr[idx] == 0) {
printk(KERN_DEBUG "sbmac: not configuring MAC at "
"%lx\n", port);
@@ -2876,7 +2881,7 @@
*/
dev = alloc_etherdev(sizeof(struct sbmac_softc));
- if (!dev)
+ if (!dev)
return -ENOMEM; /* return ENOMEM */
printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
@@ -2886,8 +2891,7 @@
dev->mem_end = 0;
if (sbmac_init(dev, idx)) {
port = A_MAC_CHANNEL_BASE(idx);
- SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR),
- sbmac_orig_hwaddr[idx]);
+ __raw_writeq(sbmac_orig_hwaddr[idx], IOADDR(port+R_MAC_ETHERNET_ADDR));
free_netdev(dev);
continue;
}
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 9bc3b1c..a4614df 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -32,8 +32,6 @@
#include "sgiseeq.h"
-static char *version = "sgiseeq.c: David S. Miller (dm@engr.sgi.com)\n";
-
static char *sgiseeqstr = "SGI Seeq8003";
/*
@@ -113,9 +111,9 @@
static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs)
{
- hregs->rx_reset = HPC3_ERXRST_CRESET | HPC3_ERXRST_CLRIRQ;
+ hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ;
udelay(20);
- hregs->rx_reset = 0;
+ hregs->reset = 0;
}
static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs,
@@ -252,7 +250,6 @@
#define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF)
#define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2)
-#define RDMACFG_INIT (HPC3_ERXDCFG_FRXDC | HPC3_ERXDCFG_FEOP | HPC3_ERXDCFG_FIRQ)
static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp,
struct sgiseeq_regs *sregs)
@@ -274,8 +271,6 @@
sregs->tstat = TSTAT_INIT_SEEQ;
}
- hregs->rx_dconfig |= RDMACFG_INIT;
-
hregs->rx_ndptr = CPHYSADDR(sp->rx_desc);
hregs->tx_ndptr = CPHYSADDR(sp->tx_desc);
@@ -446,7 +441,7 @@
spin_lock(&sp->tx_lock);
/* Ack the IRQ and set software state. */
- hregs->rx_reset = HPC3_ERXRST_CLRIRQ;
+ hregs->reset = HPC3_ERST_CLRIRQ;
/* Always check for received packets. */
sgiseeq_rx(dev, sp, hregs, sregs);
@@ -493,11 +488,13 @@
{
struct sgiseeq_private *sp = netdev_priv(dev);
struct sgiseeq_regs *sregs = sp->sregs;
+ unsigned int irq = dev->irq;
netif_stop_queue(dev);
/* Shutdown the Seeq. */
reset_hpc3_and_seeq(sp->hregs, sregs);
+ free_irq(irq, dev);
return 0;
}
@@ -644,7 +641,7 @@
#define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf))
-static int sgiseeq_init(struct hpc3_regs* regs, int irq)
+static int sgiseeq_init(struct hpc3_regs* hpcregs, int irq)
{
struct sgiseeq_init_block *sr;
struct sgiseeq_private *sp;
@@ -680,8 +677,8 @@
gpriv = sp;
gdev = dev;
#endif
- sp->sregs = (struct sgiseeq_regs *) &hpc3c0->eth_ext[0];
- sp->hregs = &hpc3c0->ethregs;
+ sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0];
+ sp->hregs = &hpcregs->ethregs;
sp->name = sgiseeqstr;
sp->mode = SEEQ_RCMD_RBCAST;
@@ -698,6 +695,11 @@
setup_rx_ring(sp->rx_desc, SEEQ_RX_BUFFERS);
setup_tx_ring(sp->tx_desc, SEEQ_TX_BUFFERS);
+ /* Setup PIO and DMA transfer timing */
+ sp->hregs->pconfig = 0x161;
+ sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP |
+ HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026;
+
/* Reset the chip. */
hpc3_eth_reset(sp->hregs);
@@ -724,7 +726,7 @@
goto err_out_free_page;
}
- printk(KERN_INFO "%s: SGI Seeq8003 ", dev->name);
+ printk(KERN_INFO "%s: %s ", dev->name, sgiseeqstr);
for (i = 0; i < 6; i++)
printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
@@ -734,7 +736,7 @@
return 0;
err_out_free_page:
- free_page((unsigned long) sp);
+ free_page((unsigned long) sp->srings);
err_out_free_dev:
kfree(dev);
@@ -744,8 +746,6 @@
static int __init sgiseeq_probe(void)
{
- printk(version);
-
/* On board adapter on 1st HPC is always present */
return sgiseeq_init(hpc3c0, SGI_ENET_IRQ);
}
@@ -754,15 +754,12 @@
{
struct net_device *next, *dev;
struct sgiseeq_private *sp;
- int irq;
for (dev = root_sgiseeq_dev; dev; dev = next) {
sp = (struct sgiseeq_private *) netdev_priv(dev);
next = sp->next_module;
- irq = dev->irq;
unregister_netdev(dev);
- free_irq(irq, dev);
- free_page((unsigned long) sp);
+ free_page((unsigned long) sp->srings);
free_netdev(dev);
}
}
@@ -770,4 +767,6 @@
module_init(sgiseeq_probe);
module_exit(sgiseeq_exit);
+MODULE_DESCRIPTION("SGI Seeq 8003 driver");
+MODULE_AUTHOR("Linux/MIPS Mailing List <linux-mips@linux-mips.org>");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 92f7552..478791e 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -842,7 +842,7 @@
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
int bit_nr =
- ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
rx_mode |= AcceptMulticast;
}
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 23b713c..1d4d886 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1696,15 +1696,20 @@
long ioaddr = net_dev->base_addr;
unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC;
u32 rx_status = sis_priv->rx_ring[entry].cmdsts;
+ int rx_work_limit;
if (netif_msg_rx_status(sis_priv))
printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
"status:0x%8.8x\n",
sis_priv->cur_rx, sis_priv->dirty_rx, rx_status);
+ rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx;
while (rx_status & OWN) {
unsigned int rx_size;
+ if (--rx_work_limit < 0)
+ break;
+
rx_size = (rx_status & DSIZE) - CRC_SIZE;
if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
@@ -1732,9 +1737,11 @@
we are working on NULL sk_buff :-( */
if (sis_priv->rx_skbuff[entry] == NULL) {
if (netif_msg_rx_err(sis_priv))
- printk(KERN_INFO "%s: NULL pointer "
- "encountered in Rx ring, skipping\n",
- net_dev->name);
+ printk(KERN_WARNING "%s: NULL pointer "
+ "encountered in Rx ring\n"
+ "cur_rx:%4.4d, dirty_rx:%4.4d\n",
+ net_dev->name, sis_priv->cur_rx,
+ sis_priv->dirty_rx);
break;
}
@@ -1770,6 +1777,7 @@
sis_priv->rx_ring[entry].cmdsts = 0;
sis_priv->rx_ring[entry].bufptr = 0;
sis_priv->stats.rx_dropped++;
+ sis_priv->cur_rx++;
break;
}
skb->dev = net_dev;
@@ -1787,7 +1795,7 @@
/* refill the Rx buffer, what if the rate of refilling is slower
* than consuming ?? */
- for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) {
+ for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) {
struct sk_buff *skb;
entry = sis_priv->dirty_rx % NUM_RX_DESC;
diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c
index f17c05c..99a776a 100644
--- a/drivers/net/skfp/smt.c
+++ b/drivers/net/skfp/smt.c
@@ -1896,7 +1896,7 @@
static void smt_string_swap(char *data, const char *format, int len)
{
- const char *open_paren = 0 ;
+ const char *open_paren = NULL ;
int x ;
while (len > 0 && *format) {
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index c2e6484..572f121 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -730,6 +730,7 @@
.phys_id = skge_phys_id,
.get_stats_count = skge_get_stats_count,
.get_ethtool_stats = skge_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
/*
@@ -3096,6 +3097,7 @@
/* read the mac address */
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
/* device is off until link detection */
netif_carrier_off(dev);
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 1438fdd..c573bb3 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1983,6 +1983,10 @@
if (lp->version >= (CHIP_91100 << 4))
smc_phy_detect(dev);
+ /* then shut everything down to save power */
+ smc_shutdown(dev);
+ smc_phy_powerdown(dev);
+
/* Set default parameters */
lp->msg_enable = NETIF_MSG_LINK;
lp->ctl_rfduplx = 0;
@@ -2291,11 +2295,11 @@
return 0;
}
-static int smc_drv_suspend(struct device *dev, pm_message_t state, u32 level)
+static int smc_drv_suspend(struct device *dev, pm_message_t state)
{
struct net_device *ndev = dev_get_drvdata(dev);
- if (ndev && level == SUSPEND_DISABLE) {
+ if (ndev) {
if (netif_running(ndev)) {
netif_device_detach(ndev);
smc_shutdown(ndev);
@@ -2305,12 +2309,12 @@
return 0;
}
-static int smc_drv_resume(struct device *dev, u32 level)
+static int smc_drv_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct net_device *ndev = dev_get_drvdata(dev);
- if (ndev && level == RESUME_ENABLE) {
+ if (ndev) {
struct smc_local *lp = netdev_priv(ndev);
smc_enable_device(pdev);
if (netif_running(ndev)) {
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index ac9ce65..817f200 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -230,12 +230,12 @@
#define SMC_CAN_USE_16BIT 1
#define SMC_CAN_USE_32BIT 0
-#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000)
-#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
-#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
-#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
-#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
-#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
+#define SMC_inb(a, r) inb((u32)a) + (r))
+#define SMC_inw(a, r) inw(((u32)a) + (r))
+#define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
+#define SMC_outw(v, a, r) outw(v, ((u32)a) + (r))
+#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
+#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
#define set_irq_type(irq, type) do {} while(0)
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index efdb179..38b2b0a 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1091,8 +1091,10 @@
rx_ring_size = sizeof(struct starfire_rx_desc) * RX_RING_SIZE;
np->queue_mem_size = tx_done_q_size + rx_done_q_size + tx_ring_size + rx_ring_size;
np->queue_mem = pci_alloc_consistent(np->pci_dev, np->queue_mem_size, &np->queue_mem_dma);
- if (np->queue_mem == 0)
+ if (np->queue_mem == NULL) {
+ free_irq(dev->irq, dev);
return -ENOMEM;
+ }
np->tx_done_q = np->queue_mem;
np->tx_done_q_dma = np->queue_mem_dma;
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index f88f5e3..cfaf47c 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -214,7 +214,8 @@
{
struct bmac_init_block *bb = bp->bmac_block;
struct net_device *dev = bp->dev;
- int i, gfp_flags = GFP_KERNEL;
+ int i;
+ gfp_t gfp_flags = GFP_KERNEL;
if (from_irq || in_interrupt())
gfp_flags = GFP_ATOMIC;
diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h
index 5674003..b0dbc51 100644
--- a/drivers/net/sunbmac.h
+++ b/drivers/net/sunbmac.h
@@ -339,7 +339,7 @@
#define ALIGNED_RX_SKB_ADDR(addr) \
((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr))
-static inline struct sk_buff *big_mac_alloc_skb(unsigned int length, int gfp_flags)
+static inline struct sk_buff *big_mac_alloc_skb(unsigned int length, gfp_t gfp_flags)
{
struct sk_buff *skb;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index d500a57..0ab9c38 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -80,7 +80,7 @@
I/O access could affect performance in ARM-based system
- Add Linux software VLAN support
- Version LK1.08 (D-Link):
+ Version LK1.08 (Philippe De Muyter phdm@macqel.be):
- Fix bug of custom mac address
(StationAddr register only accept word write)
@@ -91,11 +91,14 @@
Version LK1.09a (ICPlus):
- Add the delay time in reading the contents of EEPROM
+ Version LK1.10 (Philippe De Muyter phdm@macqel.be):
+ - Make 'unblock interface after Tx underrun' work
+
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.09a"
-#define DRV_RELDATE "10-Jul-2003"
+#define DRV_VERSION "1.01+LK1.10"
+#define DRV_RELDATE "28-Oct-2005"
/* The user-configurable values.
@@ -263,8 +266,10 @@
IVb. References
The Sundance ST201 datasheet, preliminary version.
-http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
-http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+The Kendin KS8723 datasheet, preliminary version.
+The ICplus IP100 datasheet, preliminary version.
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
IVc. Errata
@@ -500,6 +505,25 @@
static int netdev_close(struct net_device *dev);
static struct ethtool_ops ethtool_ops;
+static void sundance_reset(struct net_device *dev, unsigned long reset_cmd)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base + ASICCtrl;
+ int countdown;
+
+ /* ST201 documentation states ASICCtrl is a 32bit register */
+ iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr);
+ /* ST201 documentation states reset can take up to 1 ms */
+ countdown = 10 + 1;
+ while (ioread32 (ioaddr) & (ResetBusy << 16)) {
+ if (--countdown == 0) {
+ printk(KERN_WARNING "%s : reset not completed !!\n", dev->name);
+ break;
+ }
+ udelay(100);
+ }
+}
+
static int __devinit sundance_probe1 (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -518,6 +542,7 @@
#else
int bar = 1;
#endif
+ int phy, phy_idx = 0;
/* when built into the kernel, we only print version if device is found */
@@ -549,6 +574,7 @@
for (i = 0; i < 3; i++)
((u16 *)dev->dev_addr)[i] =
le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
dev->base_addr = (unsigned long)ioaddr;
dev->irq = irq;
@@ -605,32 +631,30 @@
printk("%2.2x:", dev->dev_addr[i]);
printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
- if (1) {
- int phy, phy_idx = 0;
- np->phys[0] = 1; /* Default setting */
- np->mii_preamble_required++;
- for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
- int mii_status = mdio_read(dev, phy, MII_BMSR);
- if (mii_status != 0xffff && mii_status != 0x0000) {
- np->phys[phy_idx++] = phy;
- np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
- if ((mii_status & 0x0040) == 0)
- np->mii_preamble_required++;
- printk(KERN_INFO "%s: MII PHY found at address %d, status "
- "0x%4.4x advertising %4.4x.\n",
- dev->name, phy, mii_status, np->mii_if.advertising);
- }
+ np->phys[0] = 1; /* Default setting */
+ np->mii_preamble_required++;
+ for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
+ int mii_status = mdio_read(dev, phy, MII_BMSR);
+ int phyx = phy & 0x1f;
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ np->phys[phy_idx++] = phyx;
+ np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE);
+ if ((mii_status & 0x0040) == 0)
+ np->mii_preamble_required++;
+ printk(KERN_INFO "%s: MII PHY found at address %d, status "
+ "0x%4.4x advertising %4.4x.\n",
+ dev->name, phyx, mii_status, np->mii_if.advertising);
}
- np->mii_preamble_required--;
-
- if (phy_idx == 0) {
- printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n",
- dev->name, ioread32(ioaddr + ASICCtrl));
- goto err_out_unregister;
- }
-
- np->mii_if.phy_id = np->phys[0];
}
+ np->mii_preamble_required--;
+
+ if (phy_idx == 0) {
+ printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n",
+ dev->name, ioread32(ioaddr + ASICCtrl));
+ goto err_out_unregister;
+ }
+
+ np->mii_if.phy_id = np->phys[0];
/* Parse override configuration */
np->an_enable = 1;
@@ -692,7 +716,7 @@
/* Reset the chip to erase previous misconfiguration. */
if (netif_msg_hw(np))
printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl));
- iowrite16(0x007f, ioaddr + ASICCtrl + 2);
+ iowrite16(0x00ff, ioaddr + ASICCtrl + 2);
if (netif_msg_hw(np))
printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl));
@@ -1190,23 +1214,33 @@
("%s: Transmit status is %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x1e) {
+ if (netif_msg_tx_err(np))
+ printk("%s: Transmit error status %4.4x.\n",
+ dev->name, tx_status);
np->stats.tx_errors++;
if (tx_status & 0x10)
np->stats.tx_fifo_errors++;
if (tx_status & 0x08)
np->stats.collisions++;
+ if (tx_status & 0x04)
+ np->stats.tx_fifo_errors++;
if (tx_status & 0x02)
np->stats.tx_window_errors++;
- /* This reset has not been verified!. */
- if (tx_status & 0x10) { /* Reset the Tx. */
- np->stats.tx_fifo_errors++;
- spin_lock(&np->lock);
- reset_tx(dev);
- spin_unlock(&np->lock);
+ /*
+ ** This reset has been verified on
+ ** DFE-580TX boards ! phdm@macqel.be.
+ */
+ if (tx_status & 0x10) { /* TxUnderrun */
+ unsigned short txthreshold;
+
+ txthreshold = ioread16 (ioaddr + TxStartThresh);
+ /* Restart Tx FIFO and transmitter */
+ sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16);
+ iowrite16 (txthreshold, ioaddr + TxStartThresh);
+ /* No need to reset the Tx pointer here */
}
- if (tx_status & 0x1e) /* Restart the Tx. */
- iowrite16 (TxEnable,
- ioaddr + MACCtrl1);
+ /* Restart the Tx. */
+ iowrite16 (TxEnable, ioaddr + MACCtrl1);
}
/* Yup, this is a documentation bug. It cost me *hours*. */
iowrite16 (0, ioaddr + TxStatus);
@@ -1619,6 +1653,7 @@
.get_link = get_link,
.get_msglevel = get_msglevel,
.set_msglevel = set_msglevel,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 1802c3b..1828a6b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -37,6 +37,7 @@
#include <linux/tcp.h>
#include <linux/workqueue.h>
#include <linux/prefetch.h>
+#include <linux/dma-mapping.h>
#include <net/checksum.h>
@@ -67,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.42"
-#define DRV_MODULE_RELDATE "Oct 3, 2005"
+#define DRV_MODULE_VERSION "3.43"
+#define DRV_MODULE_RELDATE "Oct 24, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -219,6 +220,10 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753F,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5714,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5715,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S,
@@ -466,6 +471,15 @@
spin_unlock_irqrestore(&tp->indirect_lock, flags);
}
+static void tg3_write_mem_fast(struct tg3 *tp, u32 off, u32 val)
+{
+ /* If no workaround is needed, write to mem space directly */
+ if (tp->write32 != tg3_write_indirect_reg32)
+ tw32(NIC_SRAM_WIN_BASE + off, val);
+ else
+ tg3_write_mem(tp, off, val);
+}
+
static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val)
{
unsigned long flags;
@@ -570,7 +584,7 @@
u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
u32 orig_clock_ctrl;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
return;
orig_clock_ctrl = clock_ctrl;
@@ -1210,7 +1224,7 @@
CLOCK_CTRL_ALTCLK |
CLOCK_CTRL_PWRDOWN_PLL133);
udelay(40);
- } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ } else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
/* do nothing */
} else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) {
@@ -3712,14 +3726,14 @@
dev->mtu = new_mtu;
if (new_mtu > ETH_DATA_LEN) {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
ethtool_op_set_tso(dev, 0);
}
else
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
} else {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
}
@@ -3850,7 +3864,7 @@
memset(tp->tx_ring, 0, TG3_TX_RING_BYTES);
tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) &&
+ if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
(tp->dev->mtu > ETH_DATA_LEN))
tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ;
@@ -3905,10 +3919,8 @@
*/
static void tg3_free_consistent(struct tg3 *tp)
{
- if (tp->rx_std_buffers) {
- kfree(tp->rx_std_buffers);
- tp->rx_std_buffers = NULL;
- }
+ kfree(tp->rx_std_buffers);
+ tp->rx_std_buffers = NULL;
if (tp->rx_std) {
pci_free_consistent(tp->pdev, TG3_RX_RING_BYTES,
tp->rx_std, tp->rx_std_mapping);
@@ -4347,7 +4359,7 @@
val &= ~PCIX_CAPS_RELAXED_ORDERING;
pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val);
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
u32 val;
/* Chip reset on 5780 will reset MSI enable bit,
@@ -6003,7 +6015,7 @@
tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
- (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780))
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
limit = 8;
else
limit = 16;
@@ -6191,14 +6203,16 @@
tp->timer_counter = tp->timer_multiplier;
}
- /* Heartbeat is only sent once every 120 seconds. */
+ /* Heartbeat is only sent once every 2 seconds. */
if (!--tp->asf_counter) {
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
u32 val;
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_ALIVE);
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 3);
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_MBOX,
+ FWCMD_NICDRV_ALIVE2);
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
+ /* 5 seconds timeout */
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
val = tr32(GRC_RX_CPU_EVENT);
val |= (1 << 14);
tw32(GRC_RX_CPU_EVENT, val);
@@ -6409,7 +6423,7 @@
tp->timer_counter = tp->timer_multiplier =
(HZ / tp->timer_offset);
tp->asf_counter = tp->asf_multiplier =
- ((HZ / tp->timer_offset) * 120);
+ ((HZ / tp->timer_offset) * 2);
init_timer(&tp->timer);
tp->timer.expires = jiffies + tp->timer_offset;
@@ -7237,7 +7251,7 @@
cmd->supported |= (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES))
+ if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
cmd->supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Half |
@@ -7264,7 +7278,7 @@
{
struct tg3 *tp = netdev_priv(dev);
- if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
+ if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) {
/* These are the only valid advertisement bits allowed. */
if (cmd->autoneg == AUTONEG_ENABLE &&
(cmd->advertising & ~(ADVERTISED_1000baseT_Half |
@@ -7272,7 +7286,17 @@
ADVERTISED_Autoneg |
ADVERTISED_FIBRE)))
return -EINVAL;
- }
+ /* Fiber can only do SPEED_1000. */
+ else if ((cmd->autoneg != AUTONEG_ENABLE) &&
+ (cmd->speed != SPEED_1000))
+ return -EINVAL;
+ /* Copper cannot force SPEED_1000. */
+ } else if ((cmd->autoneg != AUTONEG_ENABLE) &&
+ (cmd->speed == SPEED_1000))
+ return -EINVAL;
+ else if ((cmd->speed == SPEED_1000) &&
+ (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+ return -EINVAL;
tg3_full_lock(tp, 0);
@@ -8380,7 +8404,7 @@
}
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)) {
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
tp->nvram_jedecnum = JEDEC_ATMEL;
@@ -8980,7 +9004,7 @@
tp->phy_id = eeprom_phy_id;
if (eeprom_phy_serdes) {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
else
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
@@ -9393,8 +9417,11 @@
}
/* Find msi capability. */
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
+ tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
+ }
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
@@ -9412,7 +9439,7 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
@@ -9607,7 +9634,7 @@
* ether_setup() via the alloc_etherdev() call
*/
if (tp->dev->mtu > ETH_DATA_LEN &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780)
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
/* Determine WakeOnLan speed to use. */
@@ -9830,7 +9857,7 @@
mac_offset = 0x7c;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
!(tp->tg3_flags & TG3_FLG2_SUN_570X)) ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
mac_offset = 0xcc;
if (tg3_nvram_lock(tp))
@@ -10148,6 +10175,9 @@
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
/* 5780 always in PCIX mode */
tp->dma_rwctrl |= 0x00144000;
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
+ /* 5714 always in PCIX mode */
+ tp->dma_rwctrl |= 0x00148000;
} else {
tp->dma_rwctrl |= 0x001b000f;
}
@@ -10347,6 +10377,7 @@
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
case PHY_ID_BCM5752: return "5752";
+ case PHY_ID_BCM5714: return "5714";
case PHY_ID_BCM5780: return "5780";
case PHY_ID_BCM8002: return "8002/serdes";
case 0: return "serdes";
@@ -10492,17 +10523,17 @@
}
/* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
"for consistent allocations\n");
goto err_out_free_res;
}
} else {
- err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
"aborting.\n");
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 2e733c6..fb7e2a5 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -137,6 +137,7 @@
#define ASIC_REV_5750 0x04
#define ASIC_REV_5752 0x06
#define ASIC_REV_5780 0x08
+#define ASIC_REV_5714 0x09
#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8)
#define CHIPREV_5700_AX 0x70
#define CHIPREV_5700_BX 0x71
@@ -531,6 +532,8 @@
#define MAC_SERDES_CFG_EDGE_SELECT 0x00001000
#define MAC_SERDES_STAT 0x00000594
/* 0x598 --> 0x5b0 unused */
+#define SERDES_RX_CTRL 0x000005b0 /* 5780/5714 only */
+#define SERDES_RX_SIG_DETECT 0x00000400
#define SG_DIG_CTRL 0x000005b0
#define SG_DIG_USING_HW_AUTONEG 0x80000000
#define SG_DIG_SOFT_RESET 0x40000000
@@ -1329,6 +1332,8 @@
#define GRC_LCLCTRL_CLEARINT 0x00000002
#define GRC_LCLCTRL_SETINT 0x00000004
#define GRC_LCLCTRL_INT_ON_ATTN 0x00000008
+#define GRC_LCLCTRL_USE_SIG_DETECT 0x00000010 /* 5714/5780 only */
+#define GRC_LCLCTRL_USE_EXT_SIG_DETECT 0x00000020 /* 5714/5780 only */
#define GRC_LCLCTRL_GPIO_INPUT3 0x00000020
#define GRC_LCLCTRL_GPIO_OE3 0x00000040
#define GRC_LCLCTRL_GPIO_OUTPUT3 0x00000080
@@ -1507,6 +1512,7 @@
#define FWCMD_NICDRV_IPV6ADDR_CHG 0x00000004
#define FWCMD_NICDRV_FIX_DMAR 0x00000005
#define FWCMD_NICDRV_FIX_DMAW 0x00000006
+#define FWCMD_NICDRV_ALIVE2 0x0000000d
#define NIC_SRAM_FW_CMD_LEN_MBOX 0x00000b7c
#define NIC_SRAM_FW_CMD_DATA_MBOX 0x00000b80
#define NIC_SRAM_FW_ASF_STATUS_MBOX 0x00000c00
@@ -2175,6 +2181,7 @@
TG3_FLG2_MII_SERDES)
#define TG3_FLG2_PARALLEL_DETECT 0x01000000
#define TG3_FLG2_ICH_WORKAROUND 0x02000000
+#define TG3_FLG2_5780_CLASS 0x04000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
@@ -2222,6 +2229,7 @@
#define PHY_ID_BCM5705 0x600081a0
#define PHY_ID_BCM5750 0x60008180
#define PHY_ID_BCM5752 0x60008100
+#define PHY_ID_BCM5714 0x60008340
#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM8002 0x60010140
#define PHY_ID_INVALID 0xffffffff
@@ -2246,8 +2254,8 @@
(X) == PHY_ID_BCM5411 || (X) == PHY_ID_BCM5701 || \
(X) == PHY_ID_BCM5703 || (X) == PHY_ID_BCM5704 || \
(X) == PHY_ID_BCM5705 || (X) == PHY_ID_BCM5750 || \
- (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5780 || \
- (X) == PHY_ID_BCM8002)
+ (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
+ (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM8002)
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 32057e6..9f49156 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -318,7 +318,7 @@
if (dev->base_addr) {
outb(0,dev->base_addr+ADAPTRESET);
- schedule_timeout(TR_RST_TIME); /* wait 50ms */
+ schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */
outb(0,dev->base_addr+ADAPTRESETREL);
}
@@ -854,8 +854,7 @@
writeb(~INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN);
outb(0, PIOaddr + ADAPTRESET);
- current->state=TASK_UNINTERRUPTIBLE;
- schedule_timeout(TR_RST_TIME); /* wait 50ms */
+ schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */
outb(0, PIOaddr + ADAPTRESETREL);
#ifdef ENABLE_PAGING
@@ -903,8 +902,8 @@
DPRINTK("Adapter is up and running\n");
return 0;
}
- current->state=TASK_INTERRUPTIBLE;
- i=schedule_timeout(TR_RETRY_INTERVAL); /* wait 30 seconds */
+ i=schedule_timeout_interruptible(TR_RETRY_INTERVAL);
+ /* wait 30 seconds */
if(i!=0) break; /*prob. a signal, like the i>24*HZ case above */
}
outb(0, dev->base_addr + ADAPTRESET);/* kill pending interrupts*/
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 9e79231..05477d2 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -1101,7 +1101,7 @@
while(olympic_priv->srb_queued) {
- t = schedule_timeout(60*HZ);
+ t = schedule_timeout_interruptible(60*HZ);
if(signal_pending(current)) {
printk(KERN_WARNING "%s: SRB timed out.\n",dev->name);
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 2e39bf1..c192559 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -1243,8 +1243,7 @@
tmp = jiffies + time/(1000000/HZ);
do {
- current->state = TASK_INTERRUPTIBLE;
- tmp = schedule_timeout(tmp);
+ tmp = schedule_timeout_interruptible(tmp);
} while(time_after(tmp, jiffies));
#else
udelay(time);
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index a22d001..d7fb3ff 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -1787,10 +1787,15 @@
/* DEC now has a specification but early board makers
just put the address in the first EEPROM locations. */
/* This does memcmp(eedata, eedata+16, 8) */
+
+#ifndef CONFIG_MIPS_COBALT
+
for (i = 0; i < 8; i ++)
if (ee_data[i] != ee_data[16+i])
sa_offset = 20;
+#endif
+
/* store MAC address */
for (i = 0; i < 6; i ++)
de->dev->dev_addr[i] = ee_data[i + sa_offset];
@@ -2071,8 +2076,7 @@
return 0;
err_out_iomap:
- if (de->ee_data)
- kfree(de->ee_data);
+ kfree(de->ee_data);
iounmap(regs);
err_out_res:
pci_release_regions(pdev);
@@ -2091,8 +2095,7 @@
if (!dev)
BUG();
unregister_netdev(dev);
- if (de->ee_data)
- kfree(de->ee_data);
+ kfree(de->ee_data);
iounmap(de->regs);
pci_release_regions(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 6266a9a..125ed00 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1727,8 +1727,7 @@
tp->rx_ring, tp->rx_ring_dma);
err_out_mtable:
- if (tp->mtable)
- kfree (tp->mtable);
+ kfree (tp->mtable);
pci_iounmap(pdev, ioaddr);
err_out_free_res:
@@ -1806,8 +1805,7 @@
sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
tp->rx_ring, tp->rx_ring_dma);
- if (tp->mtable)
- kfree (tp->mtable);
+ kfree (tp->mtable);
pci_iounmap(pdev, tp->base_addr);
free_netdev (dev);
pci_release_regions (pdev);
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index ecfa6f8..4c76cb7 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -419,10 +419,9 @@
TYPHOON_STATUS_WAITING_FOR_HOST)
goto out;
- if(wait_type == WaitSleep) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
- } else
+ if(wait_type == WaitSleep)
+ schedule_timeout_uninterruptible(1);
+ else
udelay(TYPHOON_UDELAY);
}
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index fc7738f..241871589 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -490,6 +490,8 @@
u8 tx_thresh, rx_thresh;
struct mii_if_info mii_if;
+ struct work_struct tx_timeout_task;
+ struct work_struct check_media_task;
void __iomem *base;
};
@@ -497,6 +499,8 @@
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
static int rhine_open(struct net_device *dev);
static void rhine_tx_timeout(struct net_device *dev);
+static void rhine_tx_timeout_task(struct net_device *dev);
+static void rhine_check_media_task(struct net_device *dev);
static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
static void rhine_tx(struct net_device *dev);
@@ -814,8 +818,9 @@
for (i = 0; i < 6; i++)
dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- if (!is_valid_ether_addr(dev->dev_addr)) {
+ if (!is_valid_ether_addr(dev->perm_addr)) {
rc = -EIO;
printk(KERN_ERR "Invalid MAC address\n");
goto err_out_unmap;
@@ -850,6 +855,12 @@
if (rp->quirks & rqRhineI)
dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
+ INIT_WORK(&rp->tx_timeout_task,
+ (void (*)(void *))rhine_tx_timeout_task, dev);
+
+ INIT_WORK(&rp->check_media_task,
+ (void (*)(void *))rhine_check_media_task, dev);
+
/* dev->name not defined before register_netdev()! */
rc = register_netdev(dev);
if (rc)
@@ -1076,6 +1087,11 @@
ioaddr + ChipCmd1);
}
+static void rhine_check_media_task(struct net_device *dev)
+{
+ rhine_check_media(dev, 0);
+}
+
static void init_registers(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
@@ -1129,8 +1145,8 @@
if (quirks & rqRhineI) {
iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
- /* Can be called from ISR. Evil. */
- mdelay(1);
+ /* Do not call from ISR! */
+ msleep(1);
/* 0x80 must be set immediately before turning it off */
iowrite8(0x80, ioaddr + MIICmd);
@@ -1220,6 +1236,16 @@
static void rhine_tx_timeout(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
+
+ /*
+ * Move bulk of work outside of interrupt context
+ */
+ schedule_work(&rp->tx_timeout_task);
+}
+
+static void rhine_tx_timeout_task(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1625,7 +1651,7 @@
spin_lock(&rp->lock);
if (intr_status & IntrLinkChange)
- rhine_check_media(dev, 0);
+ schedule_work(&rp->check_media_task);
if (intr_status & IntrStatsMax) {
rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1829,6 +1855,7 @@
.set_wol = rhine_set_wol,
.get_sg = ethtool_op_get_sg,
.get_tx_csum = ethtool_op_get_tx_csum,
+ .get_perm_addr = ethtool_op_get_perm_addr,
};
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
@@ -1872,6 +1899,9 @@
spin_unlock_irq(&rp->lock);
free_irq(rp->pdev->irq, dev);
+
+ flush_scheduled_work();
+
free_rbufs(dev);
free_tbufs(dev);
free_ring(dev);
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index abc5cee..a368d08 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1212,10 +1212,8 @@
velocity_free_td_ring_entry(vptr, j, i);
}
- if (vptr->td_infos[j]) {
- kfree(vptr->td_infos[j]);
- vptr->td_infos[j] = NULL;
- }
+ kfree(vptr->td_infos[j]);
+ vptr->td_infos[j] = NULL;
}
}
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 7ff814f..e392ee8 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -400,7 +400,7 @@
goto out_chrdev;
}
for (i=0; i<nr_cards; i++) {
- class_device_create(cosa_class, MKDEV(cosa_major, i),
+ class_device_create(cosa_class, NULL, MKDEV(cosa_major, i),
NULL, "cosa%d", i);
err = devfs_mk_cdev(MKDEV(cosa_major, i),
S_IFCHR|S_IRUSR|S_IWUSR,
@@ -1617,8 +1617,7 @@
return r;
}
/* sleep if not ready to read */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_interruptible(1);
}
printk(KERN_INFO "cosa: timeout in get_wait_data (status 0x%x)\n",
cosa_getstatus(cosa));
@@ -1644,8 +1643,7 @@
}
#if 0
/* sleep if not ready to read */
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(1);
+ schedule_timeout_interruptible(1);
#endif
}
printk(KERN_INFO "cosa%d: timeout in put_wait_data (status 0x%x)\n",
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index 9e56fc3..e6d0057 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c
@@ -109,7 +109,7 @@
* < 0 error.
* Context: process */
-int __init cycx_drv_init(void)
+static int __init cycx_drv_init(void)
{
printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE,
copyright);
@@ -119,7 +119,7 @@
/* Module 'remove' entry point.
* o release all remaining system resources */
-void cycx_drv_cleanup(void)
+static void cycx_drv_cleanup(void)
{
}
@@ -184,8 +184,7 @@
}
/* Enable interrupt generation. */
-EXPORT_SYMBOL(cycx_inten);
-void cycx_inten(struct cycx_hw *hw)
+static void cycx_inten(struct cycx_hw *hw)
{
writeb(0, hw->dpmbase);
}
diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c
index 7b48064..430b1f6 100644
--- a/drivers/net/wan/cycx_main.c
+++ b/drivers/net/wan/cycx_main.c
@@ -103,7 +103,7 @@
* < 0 error.
* Context: process
*/
-int __init cycx_init(void)
+static int __init cycx_init(void)
{
int cnt, err = -ENOMEM;
diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c
index 02d57c0..a631d1c 100644
--- a/drivers/net/wan/cycx_x25.c
+++ b/drivers/net/wan/cycx_x25.c
@@ -78,6 +78,7 @@
#define CYCLOMX_X25_DEBUG 1
+#include <linux/ctype.h> /* isdigit() */
#include <linux/errno.h> /* return codes */
#include <linux/if_arp.h> /* ARPHRD_HWX25 */
#include <linux/kernel.h> /* printk(), and other useful stuff */
@@ -418,7 +419,7 @@
/* Set channel timeouts (default if not specified) */
chan->idle_tmout = conf->idle_timeout ? conf->idle_timeout : 90;
- } else if (is_digit(conf->addr[0])) { /* PVC */
+ } else if (isdigit(conf->addr[0])) { /* PVC */
s16 lcn = dec_to_uint(conf->addr, 0);
if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc)
@@ -1531,7 +1532,7 @@
if (!len)
len = strlen(str);
- for (; len && is_digit(*str); ++str, --len)
+ for (; len && isdigit(*str); ++str, --len)
val = (val * 10) + (*str - (unsigned) '0');
return val;
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 520a77a..2f61a47 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -446,8 +446,8 @@
return readl(dpriv->base_addr + CH0FTDA + dpriv->dev_id*4) == dpriv->ltda;
}
-int state_check(u32 state, struct dscc4_dev_priv *dpriv, struct net_device *dev,
- const char *msg)
+static int state_check(u32 state, struct dscc4_dev_priv *dpriv,
+ struct net_device *dev, const char *msg)
{
int ret = 0;
@@ -466,8 +466,9 @@
return ret;
}
-void dscc4_tx_print(struct net_device *dev, struct dscc4_dev_priv *dpriv,
- char *msg)
+static void dscc4_tx_print(struct net_device *dev,
+ struct dscc4_dev_priv *dpriv,
+ char *msg)
{
printk(KERN_DEBUG "%s: tx_current=%02d tx_dirty=%02d (%s)\n",
dev->name, dpriv->tx_current, dpriv->tx_dirty, msg);
@@ -507,7 +508,8 @@
}
}
-inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv, struct net_device *dev)
+static inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
{
unsigned int dirty = dpriv->rx_dirty%RX_RING_SIZE;
struct RxFD *rx_fd = dpriv->rx_fd + dirty;
@@ -542,8 +544,7 @@
msg, i);
goto done;
}
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout_uninterruptible(10);
rmb();
} while (++i > 0);
printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
@@ -588,8 +589,7 @@
(dpriv->iqtx[cur] & Xpr))
break;
smp_rmb();
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout_uninterruptible(10);
} while (++i > 0);
return (i >= 0 ) ? i : -EAGAIN;
@@ -1035,8 +1035,7 @@
/* Flush posted writes */
readl(ioaddr + GSTAR);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout_uninterruptible(10);
for (i = 0; i < 16; i++)
pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]);
@@ -1894,7 +1893,7 @@
* It failed and locked solid. Thus the introduction of a dummy skb.
* Problem is acknowledged in errata sheet DS5. Joy :o/
*/
-struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv)
+static struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv)
{
struct sk_buff *skb;
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 2c83cca..7981a2c 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -74,11 +74,11 @@
/*
* Modules parameters and associated varaibles
*/
-int fst_txq_low = FST_LOW_WATER_MARK;
-int fst_txq_high = FST_HIGH_WATER_MARK;
-int fst_max_reads = 7;
-int fst_excluded_cards = 0;
-int fst_excluded_list[FST_MAX_CARDS];
+static int fst_txq_low = FST_LOW_WATER_MARK;
+static int fst_txq_high = FST_HIGH_WATER_MARK;
+static int fst_max_reads = 7;
+static int fst_excluded_cards = 0;
+static int fst_excluded_list[FST_MAX_CARDS];
module_param(fst_txq_low, int, 0);
module_param(fst_txq_high, int, 0);
@@ -572,13 +572,13 @@
static void fst_process_tx_work_q(unsigned long work_q);
static void fst_process_int_work_q(unsigned long work_q);
-DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0);
-DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0);
+static DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0);
+static DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0);
-struct fst_card_info *fst_card_array[FST_MAX_CARDS];
-spinlock_t fst_work_q_lock;
-u64 fst_work_txq;
-u64 fst_work_intq;
+static struct fst_card_info *fst_card_array[FST_MAX_CARDS];
+static spinlock_t fst_work_q_lock;
+static u64 fst_work_txq;
+static u64 fst_work_intq;
static void
fst_q_work_item(u64 * queue, int card_index)
@@ -980,8 +980,7 @@
/* Wait for any previous command to complete */
while (mbval > NAK) {
spin_unlock_irqrestore(&card->card_lock, flags);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
spin_lock_irqsave(&card->card_lock, flags);
if (++safety > 2000) {
@@ -1498,7 +1497,7 @@
* The interrupt service routine
* Dev_id is our fst_card_info pointer
*/
-irqreturn_t
+static irqreturn_t
fst_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct fst_card_info *card;
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index a5d6891..e1601d3 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -330,7 +330,7 @@
-int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+static int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
pvc_device *pvc = dev_to_pvc(dev);
fr_proto_pvc_info info;
diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c
index 9dccd95..3b94352 100644
--- a/drivers/net/wan/lmc/lmc_debug.c
+++ b/drivers/net/wan/lmc/lmc_debug.c
@@ -8,10 +8,10 @@
/*
* Prints out len, max to 80 octets using printk, 20 per line
*/
-void lmcConsoleLog(char *type, unsigned char *ucData, int iLen)
-{
#ifdef DEBUG
#ifdef LMC_PACKET_LOG
+void lmcConsoleLog(char *type, unsigned char *ucData, int iLen)
+{
int iNewLine = 1;
char str[80], *pstr;
@@ -43,26 +43,24 @@
}
sprintf(pstr, "\n");
printk(str);
-#endif
-#endif
}
+#endif
+#endif
#ifdef DEBUG
u_int32_t lmcEventLogIndex = 0;
u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
-#endif
void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3)
{
-#ifdef DEBUG
lmcEventLogBuf[lmcEventLogIndex++] = EventNum;
lmcEventLogBuf[lmcEventLogIndex++] = arg2;
lmcEventLogBuf[lmcEventLogIndex++] = arg3;
lmcEventLogBuf[lmcEventLogIndex++] = jiffies;
lmcEventLogIndex &= (LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS) - 1;
-#endif
}
+#endif /* DEBUG */
void lmc_trace(struct net_device *dev, char *msg){
#ifdef LMC_TRACE
diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c
index f55ce76..af8b55f 100644
--- a/drivers/net/wan/lmc/lmc_media.c
+++ b/drivers/net/wan/lmc/lmc_media.c
@@ -48,14 +48,6 @@
*/
/*
- * For lack of a better place, put the SSI cable stuff here.
- */
-char *lmc_t1_cables[] = {
- "V.10/RS423", "EIA530A", "reserved", "X.21", "V.35",
- "EIA449/EIA530/V.36", "V.28/EIA232", "none", NULL
-};
-
-/*
* protocol independent method.
*/
static void lmc_set_protocol (lmc_softc_t * const, lmc_ctl_t *);
diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h
index 73401b0..2024b26 100644
--- a/drivers/net/wan/pc300.h
+++ b/drivers/net/wan/pc300.h
@@ -472,24 +472,8 @@
#ifdef __KERNEL__
/* Function Prototypes */
-int dma_buf_write(pc300_t *, int, ucchar *, int);
-int dma_buf_read(pc300_t *, int, struct sk_buff *);
void tx_dma_start(pc300_t *, int);
-void rx_dma_start(pc300_t *, int);
-void tx_dma_stop(pc300_t *, int);
-void rx_dma_stop(pc300_t *, int);
-int cpc_queue_xmit(struct sk_buff *, struct net_device *);
-void cpc_net_rx(struct net_device *);
-void cpc_sca_status(pc300_t *, int);
-int cpc_change_mtu(struct net_device *, int);
-int cpc_ioctl(struct net_device *, struct ifreq *, int);
-int ch_config(pc300dev_t *);
-int rx_config(pc300dev_t *);
-int tx_config(pc300dev_t *);
-void cpc_opench(pc300dev_t *);
-void cpc_closech(pc300dev_t *);
int cpc_open(struct net_device *dev);
-int cpc_close(struct net_device *dev);
int cpc_set_media(hdlc_device *, int);
#endif /* __KERNEL__ */
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 3e7753b..a3e65d1 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -291,6 +291,7 @@
static void plx_init(pc300_t *);
static void cpc_trace(struct net_device *, struct sk_buff *, char);
static int cpc_attach(struct net_device *, unsigned short, unsigned short);
+static int cpc_close(struct net_device *dev);
#ifdef CONFIG_PC300_MLPPP
void cpc_tty_init(pc300dev_t * dev);
@@ -437,7 +438,7 @@
printk("\n");
}
-int dma_get_rx_frame_size(pc300_t * card, int ch)
+static int dma_get_rx_frame_size(pc300_t * card, int ch)
{
volatile pcsca_bd_t __iomem *ptdescr;
ucshort first_bd = card->chan[ch].rx_first_bd;
@@ -462,7 +463,7 @@
* dma_buf_write: writes a frame to the Tx DMA buffers
* NOTE: this function writes one frame at a time.
*/
-int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len)
+static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len)
{
int i, nchar;
volatile pcsca_bd_t __iomem *ptdescr;
@@ -503,7 +504,7 @@
* dma_buf_read: reads a frame from the Rx DMA buffers
* NOTE: this function reads one frame at a time.
*/
-int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
+static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb)
{
int nchar;
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
@@ -560,7 +561,7 @@
return (rcvd);
}
-void tx_dma_stop(pc300_t * card, int ch)
+static void tx_dma_stop(pc300_t * card, int ch)
{
void __iomem *scabase = card->hw.scabase;
ucchar drr_ena_bit = 1 << (5 + 2 * ch);
@@ -571,7 +572,7 @@
cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit);
}
-void rx_dma_stop(pc300_t * card, int ch)
+static void rx_dma_stop(pc300_t * card, int ch)
{
void __iomem *scabase = card->hw.scabase;
ucchar drr_ena_bit = 1 << (4 + 2 * ch);
@@ -582,7 +583,7 @@
cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit);
}
-void rx_dma_start(pc300_t * card, int ch)
+static void rx_dma_start(pc300_t * card, int ch)
{
void __iomem *scabase = card->hw.scabase;
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
@@ -607,7 +608,7 @@
/*************************/
/*** FALC Routines ***/
/*************************/
-void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd)
+static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd)
{
void __iomem *falcbase = card->hw.falcbase;
unsigned long i = 0;
@@ -622,7 +623,7 @@
cpc_writeb(falcbase + F_REG(CMDR, ch), cmd);
}
-void falc_intr_enable(pc300_t * card, int ch)
+static void falc_intr_enable(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -672,7 +673,7 @@
}
}
-void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
+static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
{
void __iomem *falcbase = card->hw.falcbase;
ucchar tshf = card->chan[ch].falc.offset;
@@ -688,7 +689,7 @@
(0x80 >> (timeslot & 0x07)));
}
-void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
+static void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
{
void __iomem *falcbase = card->hw.falcbase;
ucchar tshf = card->chan[ch].falc.offset;
@@ -704,7 +705,7 @@
~(0x80 >> (timeslot & 0x07)));
}
-void falc_close_all_timeslots(pc300_t * card, int ch)
+static void falc_close_all_timeslots(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -726,7 +727,7 @@
}
}
-void falc_open_all_timeslots(pc300_t * card, int ch)
+static void falc_open_all_timeslots(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -758,7 +759,7 @@
}
}
-void falc_init_timeslot(pc300_t * card, int ch)
+static void falc_init_timeslot(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -776,7 +777,7 @@
}
}
-void falc_enable_comm(pc300_t * card, int ch)
+static void falc_enable_comm(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -792,7 +793,7 @@
~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch)));
}
-void falc_disable_comm(pc300_t * card, int ch)
+static void falc_disable_comm(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -806,7 +807,7 @@
((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch)));
}
-void falc_init_t1(pc300_t * card, int ch)
+static void falc_init_t1(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -975,7 +976,7 @@
falc_close_all_timeslots(card, ch);
}
-void falc_init_e1(pc300_t * card, int ch)
+static void falc_init_e1(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1155,7 +1156,7 @@
falc_close_all_timeslots(card, ch);
}
-void falc_init_hdlc(pc300_t * card, int ch)
+static void falc_init_hdlc(pc300_t * card, int ch)
{
void __iomem *falcbase = card->hw.falcbase;
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
@@ -1181,7 +1182,7 @@
falc_intr_enable(card, ch);
}
-void te_config(pc300_t * card, int ch)
+static void te_config(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1241,7 +1242,7 @@
CPC_UNLOCK(card, flags);
}
-void falc_check_status(pc300_t * card, int ch, unsigned char frs0)
+static void falc_check_status(pc300_t * card, int ch, unsigned char frs0)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1397,7 +1398,7 @@
}
}
-void falc_update_stats(pc300_t * card, int ch)
+static void falc_update_stats(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1450,7 +1451,7 @@
* the synchronizer and then sent to the system interface.
*----------------------------------------------------------------------------
*/
-void falc_remote_loop(pc300_t * card, int ch, int loop_on)
+static void falc_remote_loop(pc300_t * card, int ch, int loop_on)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1495,7 +1496,7 @@
* coding must be identical.
*----------------------------------------------------------------------------
*/
-void falc_local_loop(pc300_t * card, int ch, int loop_on)
+static void falc_local_loop(pc300_t * card, int ch, int loop_on)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -1522,7 +1523,7 @@
* looped. They are originated by the FALC-LH transmitter.
*----------------------------------------------------------------------------
*/
-void falc_payload_loop(pc300_t * card, int ch, int loop_on)
+static void falc_payload_loop(pc300_t * card, int ch, int loop_on)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1576,7 +1577,7 @@
* Description: Turns XLU bit off in the proper register
*----------------------------------------------------------------------------
*/
-void turn_off_xlu(pc300_t * card, int ch)
+static void turn_off_xlu(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1597,7 +1598,7 @@
* Description: Turns XLD bit off in the proper register
*----------------------------------------------------------------------------
*/
-void turn_off_xld(pc300_t * card, int ch)
+static void turn_off_xld(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1619,7 +1620,7 @@
* to generate a LOOP activation code over a T1/E1 line.
*----------------------------------------------------------------------------
*/
-void falc_generate_loop_up_code(pc300_t * card, int ch)
+static void falc_generate_loop_up_code(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1652,7 +1653,7 @@
* to generate a LOOP deactivation code over a T1/E1 line.
*----------------------------------------------------------------------------
*/
-void falc_generate_loop_down_code(pc300_t * card, int ch)
+static void falc_generate_loop_down_code(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1682,7 +1683,7 @@
* it on the reception side.
*----------------------------------------------------------------------------
*/
-void falc_pattern_test(pc300_t * card, int ch, unsigned int activate)
+static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -1729,7 +1730,7 @@
* Description: This routine returns the bit error counter value
*----------------------------------------------------------------------------
*/
-ucshort falc_pattern_test_error(pc300_t * card, int ch)
+static ucshort falc_pattern_test_error(pc300_t * card, int ch)
{
pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -1769,7 +1770,7 @@
netif_rx(skb);
}
-void cpc_tx_timeout(struct net_device *dev)
+static void cpc_tx_timeout(struct net_device *dev)
{
pc300dev_t *d = (pc300dev_t *) dev->priv;
pc300ch_t *chan = (pc300ch_t *) d->chan;
@@ -1797,7 +1798,7 @@
netif_wake_queue(dev);
}
-int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
+static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev)
{
pc300dev_t *d = (pc300dev_t *) dev->priv;
pc300ch_t *chan = (pc300ch_t *) d->chan;
@@ -1880,7 +1881,7 @@
return 0;
}
-void cpc_net_rx(struct net_device *dev)
+static void cpc_net_rx(struct net_device *dev)
{
pc300dev_t *d = (pc300dev_t *) dev->priv;
pc300ch_t *chan = (pc300ch_t *) d->chan;
@@ -2403,7 +2404,7 @@
return IRQ_HANDLED;
}
-void cpc_sca_status(pc300_t * card, int ch)
+static void cpc_sca_status(pc300_t * card, int ch)
{
ucchar ilar;
void __iomem *scabase = card->hw.scabase;
@@ -2495,7 +2496,7 @@
}
}
-void cpc_falc_status(pc300_t * card, int ch)
+static void cpc_falc_status(pc300_t * card, int ch)
{
pc300ch_t *chan = &card->chan[ch];
falc_t *pfalc = (falc_t *) & chan->falc;
@@ -2523,7 +2524,7 @@
CPC_UNLOCK(card, flags);
}
-int cpc_change_mtu(struct net_device *dev, int new_mtu)
+static int cpc_change_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU))
return -EINVAL;
@@ -2531,7 +2532,7 @@
return 0;
}
-int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
pc300dev_t *d = (pc300dev_t *) dev->priv;
@@ -2856,7 +2857,7 @@
}
}
-int ch_config(pc300dev_t * d)
+static int ch_config(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
@@ -3004,7 +3005,7 @@
return 0;
}
-int rx_config(pc300dev_t * d)
+static int rx_config(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
@@ -3035,7 +3036,7 @@
return 0;
}
-int tx_config(pc300dev_t * d)
+static int tx_config(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
@@ -3098,7 +3099,7 @@
return 0;
}
-void cpc_opench(pc300dev_t * d)
+static void cpc_opench(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
@@ -3116,7 +3117,7 @@
cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR));
}
-void cpc_closech(pc300dev_t * d)
+static void cpc_closech(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
@@ -3173,7 +3174,7 @@
return 0;
}
-int cpc_close(struct net_device *dev)
+static int cpc_close(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
pc300dev_t *d = (pc300dev_t *) dev->priv;
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c
index 8454bf6..52f26b9 100644
--- a/drivers/net/wan/pc300_tty.c
+++ b/drivers/net/wan/pc300_tty.c
@@ -112,10 +112,10 @@
static struct tty_driver serial_drv;
/* local variables */
-st_cpc_tty_area cpc_tty_area[CPC_TTY_NPORTS];
+static st_cpc_tty_area cpc_tty_area[CPC_TTY_NPORTS];
-int cpc_tty_cnt=0; /* number of intrfaces configured with MLPPP */
-int cpc_tty_unreg_flag = 0;
+static int cpc_tty_cnt = 0; /* number of intrfaces configured with MLPPP */
+static int cpc_tty_unreg_flag = 0;
/* TTY functions prototype */
static int cpc_tty_open(struct tty_struct *tty, struct file *flip);
@@ -132,9 +132,9 @@
static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char);
static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char);
-int pc300_tiocmset(struct tty_struct *, struct file *,
- unsigned int, unsigned int);
-int pc300_tiocmget(struct tty_struct *, struct file *);
+static int pc300_tiocmset(struct tty_struct *, struct file *,
+ unsigned int, unsigned int);
+static int pc300_tiocmget(struct tty_struct *, struct file *);
/* functions called by PC300 driver */
void cpc_tty_init(pc300dev_t *dev);
@@ -538,8 +538,8 @@
return(0);
}
-int pc300_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int pc300_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
{
st_cpc_tty_area *cpc_tty;
@@ -565,7 +565,7 @@
return 0;
}
-int pc300_tiocmget(struct tty_struct *tty, struct file *file)
+static int pc300_tiocmget(struct tty_struct *tty, struct file *file)
{
unsigned int result;
unsigned char status;
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 3ac9a45..036adc4 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -182,7 +182,7 @@
return(byte);
}
-void sdla_stop(struct net_device *dev)
+static void sdla_stop(struct net_device *dev)
{
struct frad_local *flp;
@@ -209,7 +209,7 @@
}
}
-void sdla_start(struct net_device *dev)
+static void sdla_start(struct net_device *dev)
{
struct frad_local *flp;
@@ -247,7 +247,7 @@
*
***************************************************/
-int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2)
+static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2)
{
unsigned long start, done, now;
char resp, *temp;
@@ -505,7 +505,7 @@
static int sdla_reconfig(struct net_device *dev);
-int sdla_activate(struct net_device *slave, struct net_device *master)
+static int sdla_activate(struct net_device *slave, struct net_device *master)
{
struct frad_local *flp;
int i;
@@ -527,7 +527,7 @@
return(0);
}
-int sdla_deactivate(struct net_device *slave, struct net_device *master)
+static int sdla_deactivate(struct net_device *slave, struct net_device *master)
{
struct frad_local *flp;
int i;
@@ -549,7 +549,7 @@
return(0);
}
-int sdla_assoc(struct net_device *slave, struct net_device *master)
+static int sdla_assoc(struct net_device *slave, struct net_device *master)
{
struct frad_local *flp;
int i;
@@ -585,7 +585,7 @@
return(0);
}
-int sdla_deassoc(struct net_device *slave, struct net_device *master)
+static int sdla_deassoc(struct net_device *slave, struct net_device *master)
{
struct frad_local *flp;
int i;
@@ -613,7 +613,7 @@
return(0);
}
-int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
+static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
{
struct frad_local *flp;
struct dlci_local *dlp;
@@ -1324,7 +1324,7 @@
return(0);
}
-int sdla_change_mtu(struct net_device *dev, int new_mtu)
+static int sdla_change_mtu(struct net_device *dev, int new_mtu)
{
struct frad_local *flp;
@@ -1337,7 +1337,7 @@
return(-EOPNOTSUPP);
}
-int sdla_set_config(struct net_device *dev, struct ifmap *map)
+static int sdla_set_config(struct net_device *dev, struct ifmap *map)
{
struct frad_local *flp;
int i;
diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c
index 0497dbd..7f1ce9d 100644
--- a/drivers/net/wan/sdla_fr.c
+++ b/drivers/net/wan/sdla_fr.c
@@ -822,7 +822,7 @@
chan->card = card;
/* verify media address */
- if (is_digit(conf->addr[0])) {
+ if (isdigit(conf->addr[0])) {
dlci = dec_to_uint(conf->addr, 0);
@@ -3456,7 +3456,7 @@
if (!len)
len = strlen(str);
- for (val = 0; len && is_digit(*str); ++str, --len)
+ for (val = 0; len && isdigit(*str); ++str, --len)
val = (val * 10) + (*str - (unsigned)'0');
return val;
diff --git a/drivers/net/wan/sdla_x25.c b/drivers/net/wan/sdla_x25.c
index 8a95d61..63f846d 100644
--- a/drivers/net/wan/sdla_x25.c
+++ b/drivers/net/wan/sdla_x25.c
@@ -957,7 +957,7 @@
chan->hold_timeout = (conf->hold_timeout) ?
conf->hold_timeout : 10;
- }else if (is_digit(conf->addr[0])){ /* PVC */
+ }else if (isdigit(conf->addr[0])){ /* PVC */
int lcn = dec_to_uint(conf->addr, 0);
if ((lcn >= card->u.x.lo_pvc) && (lcn <= card->u.x.hi_pvc)){
@@ -3875,7 +3875,7 @@
if (!len)
len = strlen(str);
- for (val = 0; len && is_digit(*str); ++str, --len)
+ for (val = 0; len && isdigit(*str); ++str, --len)
val = (val * 10) + (*str - (unsigned)'0');
return val;
@@ -3896,9 +3896,9 @@
for (val = 0; len; ++str, --len)
{
ch = *str;
- if (is_digit(ch))
+ if (isdigit(ch))
val = (val << 4) + (ch - (unsigned)'0');
- else if (is_hex_digit(ch))
+ else if (isxdigit(ch))
val = (val << 4) + ((ch & 0xDF) - (unsigned)'A' + 10);
else break;
}
diff --git a/drivers/net/wan/sdladrv.c b/drivers/net/wan/sdladrv.c
index c8bc6da..7c2cf2e 100644
--- a/drivers/net/wan/sdladrv.c
+++ b/drivers/net/wan/sdladrv.c
@@ -642,9 +642,7 @@
* Enable interrupt generation.
*/
-EXPORT_SYMBOL(sdla_inten);
-
-int sdla_inten (sdlahw_t* hw)
+static int sdla_inten (sdlahw_t* hw)
{
unsigned port = hw->port;
int tmp, i;
@@ -698,8 +696,7 @@
* Disable interrupt generation.
*/
-EXPORT_SYMBOL(sdla_intde);
-
+#if 0
int sdla_intde (sdlahw_t* hw)
{
unsigned port = hw->port;
@@ -748,14 +745,13 @@
}
return 0;
}
+#endif /* 0 */
/*============================================================================
* Acknowledge SDLA hardware interrupt.
*/
-EXPORT_SYMBOL(sdla_intack);
-
-int sdla_intack (sdlahw_t* hw)
+static int sdla_intack (sdlahw_t* hw)
{
unsigned port = hw->port;
int tmp;
@@ -827,8 +823,7 @@
* Generate an interrupt to adapter's CPU.
*/
-EXPORT_SYMBOL(sdla_intr);
-
+#if 0
int sdla_intr (sdlahw_t* hw)
{
unsigned port = hw->port;
@@ -863,6 +858,7 @@
}
return 0;
}
+#endif /* 0 */
/*============================================================================
* Execute Adapter Command.
diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c
index a6d3b55..2d1bba0 100644
--- a/drivers/net/wan/syncppp.c
+++ b/drivers/net/wan/syncppp.c
@@ -221,7 +221,7 @@
* here.
*/
-void sppp_input (struct net_device *dev, struct sk_buff *skb)
+static void sppp_input (struct net_device *dev, struct sk_buff *skb)
{
struct ppp_header *h;
struct sppp *sp = (struct sppp *)sppp_of(dev);
@@ -355,8 +355,6 @@
return;
}
-EXPORT_SYMBOL(sppp_input);
-
/*
* Handle transmit packets.
*/
@@ -990,7 +988,7 @@
* the mtu is out of range.
*/
-int sppp_change_mtu(struct net_device *dev, int new_mtu)
+static int sppp_change_mtu(struct net_device *dev, int new_mtu)
{
if(new_mtu<128||new_mtu>PPP_MTU||(dev->flags&IFF_UP))
return -EINVAL;
@@ -998,8 +996,6 @@
return 0;
}
-EXPORT_SYMBOL(sppp_change_mtu);
-
/**
* sppp_do_ioctl - Ioctl handler for ppp/hdlc
* @dev: Device subject to ioctl
@@ -1456,7 +1452,7 @@
return 0;
}
-struct packet_type sppp_packet_type = {
+static struct packet_type sppp_packet_type = {
.type = __constant_htons(ETH_P_WAN_PPP),
.func = sppp_rcv,
};
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 06998c2..750c016 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -35,6 +35,7 @@
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/bitops.h>
+#include <linux/scatterlist.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -1046,7 +1047,6 @@
}
};
-#ifdef WIRELESS_EXT
// Frequency list (map channels to frequencies)
static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442,
2447, 2452, 2457, 2462, 2467, 2472, 2484 };
@@ -1067,7 +1067,6 @@
/* List of Wireless Handlers (new API) */
static const struct iw_handler_def airo_handler_def;
-#endif /* WIRELESS_EXT */
static const char version[] = "airo.c 0.6 (Ben Reed & Javier Achirica)";
@@ -1110,10 +1109,8 @@
static int airo_thread(void *data);
static void timer_func( struct net_device *dev );
static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-#ifdef WIRELESS_EXT
static struct iw_statistics *airo_get_wireless_stats (struct net_device *dev);
static void airo_read_wireless_stats (struct airo_info *local);
-#endif /* WIRELESS_EXT */
#ifdef CISCO_EXT
static int readrids(struct net_device *dev, aironet_ioctl *comp);
static int writerids(struct net_device *dev, aironet_ioctl *comp);
@@ -1187,12 +1184,10 @@
int fid;
} xmit, xmit11;
struct net_device *wifidev;
-#ifdef WIRELESS_EXT
struct iw_statistics wstats; // wireless stats
unsigned long scan_timestamp; /* Time started to scan */
struct iw_spy_data spy_data;
struct iw_public_data wireless_data;
-#endif /* WIRELESS_EXT */
#ifdef MICSUPPORT
/* MIC stuff */
struct crypto_tfm *tfm;
@@ -1596,11 +1591,9 @@
aes_counter[12] = (u8)(counter >> 24);
counter++;
memcpy (plain, aes_counter, 16);
- sg[0].page = virt_to_page(plain);
- sg[0].offset = ((long) plain & ~PAGE_MASK);
- sg[0].length = 16;
+ sg_set_buf(sg, plain, 16);
crypto_cipher_encrypt(tfm, sg, sg, 16);
- cipher = kmap(sg[0].page) + sg[0].offset;
+ cipher = kmap(sg->page) + sg->offset;
for (j=0; (j<16) && (i< (sizeof(context->coeff)/sizeof(context->coeff[0]))); ) {
context->coeff[i++] = ntohl(*(u32 *)&cipher[j]);
j += 4;
@@ -2387,14 +2380,10 @@
dev_kfree_skb(skb);
}
- if (ai->flash)
- kfree(ai->flash);
- if (ai->rssi)
- kfree(ai->rssi);
- if (ai->APList)
- kfree(ai->APList);
- if (ai->SSID)
- kfree(ai->SSID);
+ kfree(ai->flash);
+ kfree(ai->rssi);
+ kfree(ai->APList);
+ kfree(ai->SSID);
if (freeres) {
/* PCMCIA frees this stuff, so only for PCI and ISA */
release_region( dev->base_addr, 64 );
@@ -2527,7 +2516,8 @@
unsigned long mem_start, mem_len, aux_start, aux_len;
int rc = -1;
int i;
- unsigned char *busaddroff,*vpackoff;
+ dma_addr_t busaddroff;
+ unsigned char *vpackoff;
unsigned char __iomem *pciaddroff;
mem_start = pci_resource_start(pci, 1);
@@ -2570,7 +2560,7 @@
/*
* Setup descriptor RX, TX, CONFIG
*/
- busaddroff = (unsigned char *)ai->shared_dma;
+ busaddroff = ai->shared_dma;
pciaddroff = ai->pciaux + AUX_OFFSET;
vpackoff = ai->shared;
@@ -2579,7 +2569,7 @@
ai->rxfids[i].pending = 0;
ai->rxfids[i].card_ram_off = pciaddroff;
ai->rxfids[i].virtual_host_addr = vpackoff;
- ai->rxfids[i].rx_desc.host_addr = (dma_addr_t) busaddroff;
+ ai->rxfids[i].rx_desc.host_addr = busaddroff;
ai->rxfids[i].rx_desc.valid = 1;
ai->rxfids[i].rx_desc.len = PKTSIZE;
ai->rxfids[i].rx_desc.rdy = 0;
@@ -2594,7 +2584,7 @@
ai->txfids[i].card_ram_off = pciaddroff;
ai->txfids[i].virtual_host_addr = vpackoff;
ai->txfids[i].tx_desc.valid = 1;
- ai->txfids[i].tx_desc.host_addr = (dma_addr_t) busaddroff;
+ ai->txfids[i].tx_desc.host_addr = busaddroff;
memcpy(ai->txfids[i].virtual_host_addr,
&wifictlhdr8023, sizeof(wifictlhdr8023));
@@ -2607,8 +2597,8 @@
/* Rid descriptor setup */
ai->config_desc.card_ram_off = pciaddroff;
ai->config_desc.virtual_host_addr = vpackoff;
- ai->config_desc.rid_desc.host_addr = (dma_addr_t) busaddroff;
- ai->ridbus = (dma_addr_t)busaddroff;
+ ai->config_desc.rid_desc.host_addr = busaddroff;
+ ai->ridbus = busaddroff;
ai->config_desc.rid_desc.rid = 0;
ai->config_desc.rid_desc.len = RIDSIZE;
ai->config_desc.rid_desc.valid = 1;
@@ -2647,9 +2637,7 @@
dev->get_stats = &airo_get_stats;
dev->set_mac_address = &airo_set_mac_address;
dev->do_ioctl = &airo_ioctl;
-#ifdef WIRELESS_EXT
dev->wireless_handlers = &airo_handler_def;
-#endif /* WIRELESS_EXT */
dev->change_mtu = &airo_change_mtu;
dev->open = &airo_open;
dev->stop = &airo_close;
@@ -2675,9 +2663,7 @@
dev->priv = ethdev->priv;
dev->irq = ethdev->irq;
dev->base_addr = ethdev->base_addr;
-#ifdef WIRELESS_EXT
dev->wireless_data = ethdev->wireless_data;
-#endif /* WIRELESS_EXT */
memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len);
err = register_netdev(dev);
if (err<0) {
@@ -2755,11 +2741,9 @@
dev->set_multicast_list = &airo_set_multicast_list;
dev->set_mac_address = &airo_set_mac_address;
dev->do_ioctl = &airo_ioctl;
-#ifdef WIRELESS_EXT
dev->wireless_handlers = &airo_handler_def;
ai->wireless_data.spy_data = &ai->spy_data;
dev->wireless_data = &ai->wireless_data;
-#endif /* WIRELESS_EXT */
dev->change_mtu = &airo_change_mtu;
dev->open = &airo_open;
dev->stop = &airo_close;
@@ -3637,10 +3621,8 @@
int rc;
memset( &mySsid, 0, sizeof( mySsid ) );
- if (ai->flash) {
- kfree (ai->flash);
- ai->flash = NULL;
- }
+ kfree (ai->flash);
+ ai->flash = NULL;
/* The NOP is the first step in getting the card going */
cmd.cmd = NOP;
@@ -3677,14 +3659,10 @@
tdsRssiRid rssi_rid;
CapabilityRid cap_rid;
- if (ai->APList) {
- kfree(ai->APList);
- ai->APList = NULL;
- }
- if (ai->SSID) {
- kfree(ai->SSID);
- ai->SSID = NULL;
- }
+ kfree(ai->APList);
+ ai->APList = NULL;
+ kfree(ai->SSID);
+ ai->SSID = NULL;
// general configuration (read/modify/write)
status = readConfigRid(ai, lock);
if ( status != SUCCESS ) return ERROR;
@@ -3698,10 +3676,8 @@
memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */
}
else {
- if (ai->rssi) {
- kfree(ai->rssi);
- ai->rssi = NULL;
- }
+ kfree(ai->rssi);
+ ai->rssi = NULL;
if (cap_rid.softCap & 8)
ai->config.rmode |= RXMODE_NORMALIZED_RSSI;
else
@@ -5380,11 +5356,13 @@
static int proc_close( struct inode *inode, struct file *file )
{
- struct proc_data *data = (struct proc_data *)file->private_data;
- if ( data->on_close != NULL ) data->on_close( inode, file );
- if ( data->rbuffer ) kfree( data->rbuffer );
- if ( data->wbuffer ) kfree( data->wbuffer );
- kfree( data );
+ struct proc_data *data = file->private_data;
+
+ if (data->on_close != NULL)
+ data->on_close(inode, file);
+ kfree(data->rbuffer);
+ kfree(data->wbuffer);
+ kfree(data);
return 0;
}
@@ -5515,12 +5493,13 @@
struct net_device *dev = pci_get_drvdata(pdev);
struct airo_info *ai = dev->priv;
Resp rsp;
+ pci_power_t prev_state = pdev->current_state;
- pci_set_power_state(pdev, 0);
+ pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- pci_enable_wake(pdev, pci_choose_state(pdev, ai->power), 0);
+ pci_enable_wake(pdev, PCI_D0, 0);
- if (ai->power.event > 1) {
+ if (prev_state != PCI_D1) {
reset_card(dev, 0);
mpi_init_descriptors(ai);
setup_card(ai, dev->dev_addr, 0);
@@ -5598,7 +5577,6 @@
remove_proc_entry("aironet", proc_root_driver);
}
-#ifdef WIRELESS_EXT
/*
* Initial Wireless Extension code for Aironet driver by :
* Jean Tourrilhes <jt@hpl.hp.com> - HPL - 17 November 00
@@ -7107,8 +7085,6 @@
.get_wireless_stats = airo_get_wireless_stats,
};
-#endif /* WIRELESS_EXT */
-
/*
* This defines the configuration part of the Wireless Extensions
* Note : irq and spinlock protection will occur in the subroutines
@@ -7187,7 +7163,6 @@
return rc;
}
-#ifdef WIRELESS_EXT
/*
* Get the Wireless stats out of the driver
* Note : irq and spinlock protection will occur in the subroutines
@@ -7260,7 +7235,6 @@
return &local->wstats;
}
-#endif /* WIRELESS_EXT */
#ifdef CISCO_EXT
/*
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index bf25584..784de91 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -258,9 +258,7 @@
/* Unlink device structure, free pieces */
*linkp = link->next;
- if (link->priv) {
- kfree(link->priv);
- }
+ kfree(link->priv);
kfree(link);
} /* airo_detach */
diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c
index 9d49670..7b321f7 100644
--- a/drivers/net/wireless/airport.c
+++ b/drivers/net/wireless/airport.c
@@ -15,28 +15,11 @@
#define PFX DRIVER_NAME ": "
#include <linux/config.h>
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/wireless.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/current.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
+#include <linux/delay.h>
#include <asm/pmac_feature.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
#include "orinoco.h"
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 587869d..1fbe027 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -618,12 +618,12 @@
static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data);
static void atmel_command_irq(struct atmel_private *priv);
static int atmel_validate_channel(struct atmel_private *priv, int channel);
-static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header,
+static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
u16 frame_len, u8 rssi);
static void atmel_management_timer(u_long a);
static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size);
static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size);
-static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header,
+static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
u8 *body, int body_len);
static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index);
@@ -827,7 +827,7 @@
static int start_tx (struct sk_buff *skb, struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
- struct ieee80211_hdr header;
+ struct ieee80211_hdr_4addr header;
unsigned long flags;
u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
@@ -902,7 +902,7 @@
}
static void atmel_transmit_management_frame(struct atmel_private *priv,
- struct ieee80211_hdr *header,
+ struct ieee80211_hdr_4addr *header,
u8 *body, int body_len)
{
u16 buff;
@@ -917,7 +917,7 @@
tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT);
}
-static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header,
+static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
u16 msdu_size, u16 rx_packet_loc, u32 crc)
{
/* fast path: unfragmented packet copy directly into skbuf */
@@ -990,7 +990,7 @@
return (crc ^ 0xffffffff) == netcrc;
}
-static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header,
+static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags)
{
u8 mac4[6];
@@ -1082,7 +1082,7 @@
static void rx_done_irq(struct atmel_private *priv)
{
int i;
- struct ieee80211_hdr header;
+ struct ieee80211_hdr_4addr header;
for (i = 0;
atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID &&
@@ -1653,8 +1653,7 @@
unregister_netdev(dev);
remove_proc_entry("driver/atmel", NULL);
free_irq(dev->irq, dev);
- if (priv->firmware)
- kfree(priv->firmware);
+ kfree(priv->firmware);
if (freeres) {
/* PCMCIA frees this stuff, so only for PCI */
release_region(dev->base_addr, 64);
@@ -2450,8 +2449,7 @@
break;
}
- if (priv->firmware)
- kfree(priv->firmware);
+ kfree(priv->firmware);
priv->firmware = new_firmware;
priv->firmware_length = com.len;
@@ -2650,7 +2648,7 @@
static void send_authentication_request(struct atmel_private *priv, u8 *challenge, int challenge_len)
{
- struct ieee80211_hdr header;
+ struct ieee80211_hdr_4addr header;
struct auth_body auth;
header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
@@ -2688,7 +2686,7 @@
{
u8 *ssid_el_p;
int bodysize;
- struct ieee80211_hdr header;
+ struct ieee80211_hdr_4addr header;
struct ass_req_format {
u16 capability;
u16 listen_interval;
@@ -2738,7 +2736,7 @@
atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
}
-static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr *header)
+static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr_4addr *header)
{
if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0;
@@ -2788,7 +2786,7 @@
}
-static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr *header,
+static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
u16 capability, u16 beacon_period, u8 channel, u8 rssi,
u8 ssid_len, u8 *ssid, int is_beacon)
{
@@ -3072,7 +3070,7 @@
}
/* deals with incoming managment frames. */
-static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header,
+static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header,
u16 frame_len, u8 rssi)
{
u16 subtype;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ff031a3..195cb36 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -259,8 +259,7 @@
/* Unlink device structure, free pieces */
*linkp = link->next;
- if (link->priv)
- kfree(link->priv);
+ kfree(link->priv);
kfree(link);
}
diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
index 21c3d0d..579480d 100644
--- a/drivers/net/wireless/hermes.c
+++ b/drivers/net/wireless/hermes.c
@@ -39,17 +39,10 @@
*/
#include <linux/config.h>
-
#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/net.h>
-#include <asm/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
#include "hermes.h"
@@ -451,6 +444,43 @@
return err;
}
+/* Write a block of data to the chip's buffer with padding if
+ * neccessary, via the BAP. Synchronization/serialization is the
+ * caller's problem. len must be even.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
+ u16 id, u16 offset)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+
+ if (len < 0 || len % 2 || data_len > len)
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, id, offset);
+ if (err)
+ goto out;
+
+ /* Transfer all the complete words of data */
+ hermes_write_words(hw, dreg, buf, data_len/2);
+ /* If there is an odd byte left over pad and transfer it */
+ if (data_len & 1) {
+ u8 end[2];
+ end[1] = 0;
+ end[0] = ((unsigned char *)buf)[data_len - 1];
+ hermes_write_words(hw, dreg, end, 1);
+ data_len ++;
+ }
+ /* Now send zeros for the padding */
+ if (data_len < len)
+ hermes_clear_words(hw, dreg, (len - data_len) / 2);
+ /* Complete */
+ out:
+ return err;
+}
+
/* Read a Length-Type-Value record from the card.
*
* If length is NULL, we ignore the length read from the card, and
@@ -538,6 +568,7 @@
EXPORT_SYMBOL(hermes_bap_pread);
EXPORT_SYMBOL(hermes_bap_pwrite);
+EXPORT_SYMBOL(hermes_bap_pwrite_pad);
EXPORT_SYMBOL(hermes_read_ltv);
EXPORT_SYMBOL(hermes_write_ltv);
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
index 8c9e874..a6bd472 100644
--- a/drivers/net/wireless/hermes.h
+++ b/drivers/net/wireless/hermes.h
@@ -30,9 +30,8 @@
* access to the hermes_t structure, and to the hardware
*/
-#include <linux/delay.h>
#include <linux/if_ether.h>
-#include <asm/byteorder.h>
+#include <asm/io.h>
/*
* Limits and constants
@@ -192,13 +191,13 @@
#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */
struct hermes_tx_descriptor {
- u16 status;
- u16 reserved1;
- u16 reserved2;
- u32 sw_support;
+ __le16 status;
+ __le16 reserved1;
+ __le16 reserved2;
+ __le32 sw_support;
u8 retry_count;
u8 tx_rate;
- u16 tx_control;
+ __le16 tx_control;
} __attribute__ ((packed));
#define HERMES_TXSTAT_RETRYERR (0x0001)
@@ -222,60 +221,60 @@
#define HERMES_INQ_SEC_STAT_AGERE (0xF202)
struct hermes_tallies_frame {
- u16 TxUnicastFrames;
- u16 TxMulticastFrames;
- u16 TxFragments;
- u16 TxUnicastOctets;
- u16 TxMulticastOctets;
- u16 TxDeferredTransmissions;
- u16 TxSingleRetryFrames;
- u16 TxMultipleRetryFrames;
- u16 TxRetryLimitExceeded;
- u16 TxDiscards;
- u16 RxUnicastFrames;
- u16 RxMulticastFrames;
- u16 RxFragments;
- u16 RxUnicastOctets;
- u16 RxMulticastOctets;
- u16 RxFCSErrors;
- u16 RxDiscards_NoBuffer;
- u16 TxDiscardsWrongSA;
- u16 RxWEPUndecryptable;
- u16 RxMsgInMsgFragments;
- u16 RxMsgInBadMsgFragments;
+ __le16 TxUnicastFrames;
+ __le16 TxMulticastFrames;
+ __le16 TxFragments;
+ __le16 TxUnicastOctets;
+ __le16 TxMulticastOctets;
+ __le16 TxDeferredTransmissions;
+ __le16 TxSingleRetryFrames;
+ __le16 TxMultipleRetryFrames;
+ __le16 TxRetryLimitExceeded;
+ __le16 TxDiscards;
+ __le16 RxUnicastFrames;
+ __le16 RxMulticastFrames;
+ __le16 RxFragments;
+ __le16 RxUnicastOctets;
+ __le16 RxMulticastOctets;
+ __le16 RxFCSErrors;
+ __le16 RxDiscards_NoBuffer;
+ __le16 TxDiscardsWrongSA;
+ __le16 RxWEPUndecryptable;
+ __le16 RxMsgInMsgFragments;
+ __le16 RxMsgInBadMsgFragments;
/* Those last are probably not available in very old firmwares */
- u16 RxDiscards_WEPICVError;
- u16 RxDiscards_WEPExcluded;
+ __le16 RxDiscards_WEPICVError;
+ __le16 RxDiscards_WEPExcluded;
} __attribute__ ((packed));
/* Grabbed from wlan-ng - Thanks Mark... - Jean II
* This is the result of a scan inquiry command */
/* Structure describing info about an Access Point */
struct prism2_scan_apinfo {
- u16 channel; /* Channel where the AP sits */
- u16 noise; /* Noise level */
- u16 level; /* Signal level */
+ __le16 channel; /* Channel where the AP sits */
+ __le16 noise; /* Noise level */
+ __le16 level; /* Signal level */
u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- u16 beacon_interv; /* Beacon interval */
- u16 capabilities; /* Capabilities */
- u16 essid_len; /* ESSID length */
+ __le16 beacon_interv; /* Beacon interval */
+ __le16 capabilities; /* Capabilities */
+ __le16 essid_len; /* ESSID length */
u8 essid[32]; /* ESSID of the network */
u8 rates[10]; /* Bit rate supported */
- u16 proberesp_rate; /* Data rate of the response frame */
- u16 atim; /* ATIM window time, Kus (hostscan only) */
+ __le16 proberesp_rate; /* Data rate of the response frame */
+ __le16 atim; /* ATIM window time, Kus (hostscan only) */
} __attribute__ ((packed));
/* Same stuff for the Lucent/Agere card.
* Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
struct agere_scan_apinfo {
- u16 channel; /* Channel where the AP sits */
- u16 noise; /* Noise level */
- u16 level; /* Signal level */
+ __le16 channel; /* Channel where the AP sits */
+ __le16 noise; /* Noise level */
+ __le16 level; /* Signal level */
u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- u16 beacon_interv; /* Beacon interval */
- u16 capabilities; /* Capabilities */
+ __le16 beacon_interv; /* Beacon interval */
+ __le16 capabilities; /* Capabilities */
/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
- u16 essid_len; /* ESSID length */
+ __le16 essid_len; /* ESSID length */
u8 essid[32]; /* ESSID of the network */
} __attribute__ ((packed));
@@ -283,16 +282,16 @@
struct symbol_scan_apinfo {
u8 channel; /* Channel where the AP sits */
u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */
- u16 noise; /* Noise level */
- u16 level; /* Signal level */
+ __le16 noise; /* Noise level */
+ __le16 level; /* Signal level */
u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- u16 beacon_interv; /* Beacon interval */
- u16 capabilities; /* Capabilities */
+ __le16 beacon_interv; /* Beacon interval */
+ __le16 capabilities; /* Capabilities */
/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
- u16 essid_len; /* ESSID length */
+ __le16 essid_len; /* ESSID length */
u8 essid[32]; /* ESSID of the network */
- u16 rates[5]; /* Bit rate supported */
- u16 basic_rates; /* Basic rates bitmask */
+ __le16 rates[5]; /* Bit rate supported */
+ __le16 basic_rates; /* Basic rates bitmask */
u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */
u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */
} __attribute__ ((packed));
@@ -312,7 +311,7 @@
#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006)
struct hermes_linkstatus {
- u16 linkstatus; /* Link status */
+ __le16 linkstatus; /* Link status */
} __attribute__ ((packed));
struct hermes_response {
@@ -321,8 +320,8 @@
/* "ID" structure - used for ESSID and station nickname */
struct hermes_idstring {
- u16 len;
- u16 val[16];
+ __le16 len;
+ __le16 val[16];
} __attribute__ ((packed));
struct hermes_multicast {
@@ -377,6 +376,8 @@
u16 id, u16 offset);
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
u16 id, u16 offset);
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
+ unsigned data_len, unsigned len, u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
@@ -447,7 +448,7 @@
static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
{
- u16 rec;
+ __le16 rec;
int err;
err = HERMES_READ_RECORD(hw, bap, rid, &rec);
@@ -457,7 +458,7 @@
static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word)
{
- u16 rec = cpu_to_le16(word);
+ __le16 rec = cpu_to_le16(word);
return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
}
diff --git a/drivers/net/wireless/hostap/hostap.c b/drivers/net/wireless/hostap/hostap.c
index e7f5821..6a96cd9 100644
--- a/drivers/net/wireless/hostap/hostap.c
+++ b/drivers/net/wireless/hostap/hostap.c
@@ -716,9 +716,6 @@
hostap_deauth_all_stas(dev, local->ap, 1);
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
- if (local->func->dev_close && local->func->dev_close(local))
- return 0;
-
if (dev == local->dev) {
local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL);
}
@@ -766,9 +763,6 @@
local->hw_downloading)
return -ENODEV;
- if (local->func->dev_open && local->func->dev_open(local))
- return 1;
-
if (!try_module_get(local->hw_module))
return -ENODEV;
local->num_dev_open++;
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index b050124..ffac508 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -6,10 +6,10 @@
void hostap_dump_rx_80211(const char *name, struct sk_buff *skb,
struct hostap_80211_rx_status *rx_stats)
{
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u16 fc;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
printk(KERN_DEBUG "%s: RX signal=%d noise=%d rate=%d len=%d "
"jiffies=%ld\n",
@@ -51,7 +51,7 @@
int hdrlen, phdrlen, head_need, tail_need;
u16 fc;
int prism_header, ret;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
iface = netdev_priv(dev);
local = iface->local;
@@ -70,7 +70,7 @@
phdrlen = 0;
}
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) {
@@ -215,7 +215,7 @@
/* Called only as a tasklet (software IRQ) */
static struct sk_buff *
-prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr)
+prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr_4addr *hdr)
{
struct sk_buff *skb = NULL;
u16 sc;
@@ -229,7 +229,7 @@
if (frag == 0) {
/* Reserve enough space to fit maximum frame length */
skb = dev_alloc_skb(local->dev->mtu +
- sizeof(struct ieee80211_hdr) +
+ sizeof(struct ieee80211_hdr_4addr) +
8 /* LLC */ +
2 /* alignment */ +
8 /* WEP */ + ETH_ALEN /* WDS */);
@@ -267,7 +267,7 @@
/* Called only as a tasklet (software IRQ) */
static int prism2_frag_cache_invalidate(local_info_t *local,
- struct ieee80211_hdr *hdr)
+ struct ieee80211_hdr_4addr *hdr)
{
u16 sc;
unsigned int seq;
@@ -441,7 +441,7 @@
u16 stype)
{
if (local->iw_mode == IW_MODE_MASTER) {
- hostap_update_sta_ps(local, (struct ieee80211_hdr *)
+ hostap_update_sta_ps(local, (struct ieee80211_hdr_4addr *)
skb->data);
}
@@ -520,7 +520,7 @@
static inline int
-hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr *hdr,
+hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr_4addr *hdr,
u16 fc, struct net_device **wds)
{
/* FIX: is this really supposed to accept WDS frames only in Master
@@ -579,13 +579,13 @@
{
struct net_device *dev = local->dev;
u16 fc, ethertype;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u8 *pos;
if (skb->len < 24)
return 0;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
/* check that the frame is unicast frame to us */
@@ -619,13 +619,13 @@
hostap_rx_frame_decrypt(local_info_t *local, struct sk_buff *skb,
struct ieee80211_crypt_data *crypt)
{
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
int res, hdrlen;
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
if (local->tkip_countermeasures &&
@@ -658,13 +658,13 @@
hostap_rx_frame_decrypt_msdu(local_info_t *local, struct sk_buff *skb,
int keyidx, struct ieee80211_crypt_data *crypt)
{
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
int res, hdrlen;
if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
return 0;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
atomic_inc(&crypt->refcnt);
@@ -689,7 +689,7 @@
{
struct hostap_interface *iface;
local_info_t *local;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
size_t hdrlen;
u16 fc, type, stype, sc;
struct net_device *wds = NULL;
@@ -716,7 +716,7 @@
dev = local->ddev;
iface = netdev_priv(dev);
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
stats = hostap_get_stats(dev);
if (skb->len < 10)
@@ -737,7 +737,8 @@
struct iw_quality wstats;
wstats.level = rx_stats->signal;
wstats.noise = rx_stats->noise;
- wstats.updated = 6; /* No qual value */
+ wstats.updated = IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_UPDATED
+ | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM;
/* Update spy records */
wireless_spy_update(dev, hdr->addr2, &wstats);
}
@@ -889,7 +890,7 @@
if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
(keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0)
goto rx_dropped;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
/* skb: hdr + (possibly fragmented) plaintext payload */
@@ -941,7 +942,7 @@
/* this was the last fragment and the frame will be
* delivered, so remove skb from fragment cache */
skb = frag_skb;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
prism2_frag_cache_invalidate(local, hdr);
}
@@ -952,7 +953,7 @@
hostap_rx_frame_decrypt_msdu(local, skb, keyidx, crypt))
goto rx_dropped;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !local->open_wep) {
if (local->ieee_802_1x &&
hostap_is_eapol_frame(local, skb)) {
diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c
index 6358015..9d24f8a 100644
--- a/drivers/net/wireless/hostap/hostap_80211_tx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_tx.c
@@ -1,9 +1,9 @@
void hostap_dump_tx_80211(const char *name, struct sk_buff *skb)
{
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u16 fc;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n",
name, skb->len, jiffies);
@@ -41,7 +41,7 @@
struct hostap_interface *iface;
local_info_t *local;
int need_headroom, need_tailroom = 0;
- struct ieee80211_hdr hdr;
+ struct ieee80211_hdr_4addr hdr;
u16 fc, ethertype = 0;
enum {
WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME
@@ -244,7 +244,7 @@
struct hostap_interface *iface;
local_info_t *local;
struct hostap_skb_tx_data *meta;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u16 fc;
iface = netdev_priv(dev);
@@ -266,7 +266,7 @@
meta->iface = iface;
if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) {
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
if (WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA &&
WLAN_FC_GET_STYPE(fc) == IEEE80211_STYPE_DATA) {
@@ -289,7 +289,7 @@
{
struct hostap_interface *iface;
local_info_t *local;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u16 fc;
int hdr_len, res;
@@ -303,7 +303,7 @@
if (local->tkip_countermeasures &&
crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) {
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
"TX packet to " MACSTR "\n",
@@ -317,15 +317,15 @@
if (skb == NULL)
return NULL;
- if ((skb_headroom(skb) < crypt->ops->extra_prefix_len ||
- skb_tailroom(skb) < crypt->ops->extra_postfix_len) &&
- pskb_expand_head(skb, crypt->ops->extra_prefix_len,
- crypt->ops->extra_postfix_len, GFP_ATOMIC)) {
+ if ((skb_headroom(skb) < crypt->ops->extra_mpdu_prefix_len ||
+ skb_tailroom(skb) < crypt->ops->extra_mpdu_postfix_len) &&
+ pskb_expand_head(skb, crypt->ops->extra_mpdu_prefix_len,
+ crypt->ops->extra_mpdu_postfix_len, GFP_ATOMIC)) {
kfree_skb(skb);
return NULL;
}
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
hdr_len = hostap_80211_get_hdrlen(fc);
@@ -360,7 +360,7 @@
ap_tx_ret tx_ret;
struct hostap_skb_tx_data *meta;
int no_encrypt = 0;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
iface = netdev_priv(dev);
local = iface->local;
@@ -403,7 +403,7 @@
tx_ret = hostap_handle_sta_tx(local, &tx);
skb = tx.skb;
meta = (struct hostap_skb_tx_data *) skb->cb;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
switch (tx_ret) {
case AP_TX_CONTINUE:
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 930cef8..9da94ab 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -591,14 +591,14 @@
{
struct ap_data *ap = data;
u16 fc;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
if (!ap->local->hostapd || !ap->local->apdev) {
dev_kfree_skb(skb);
return;
}
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
/* Pass the TX callback frame to the hostapd; use 802.11 header version
@@ -623,7 +623,7 @@
{
struct ap_data *ap = data;
struct net_device *dev = ap->local->dev;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u16 fc, *pos, auth_alg, auth_transaction, status;
struct sta_info *sta = NULL;
char *txt = NULL;
@@ -633,7 +633,7 @@
return;
}
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_MGMT ||
WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_AUTH ||
@@ -692,7 +692,7 @@
{
struct ap_data *ap = data;
struct net_device *dev = ap->local->dev;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u16 fc, *pos, status;
struct sta_info *sta = NULL;
char *txt = NULL;
@@ -702,7 +702,7 @@
return;
}
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_MGMT ||
(WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_ASSOC_RESP &&
@@ -757,12 +757,12 @@
static void hostap_ap_tx_cb_poll(struct sk_buff *skb, int ok, void *data)
{
struct ap_data *ap = data;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
struct sta_info *sta;
if (skb->len < 24)
goto fail;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
if (ok) {
spin_lock(&ap->sta_table_lock);
sta = ap_get_sta(ap, hdr->addr1);
@@ -918,7 +918,7 @@
{
struct hostap_interface *iface;
local_info_t *local;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u16 fc;
struct sk_buff *skb;
struct hostap_skb_tx_data *meta;
@@ -944,7 +944,7 @@
fc = type_subtype;
hdrlen = hostap_80211_get_hdrlen(fc);
- hdr = (struct ieee80211_hdr *) skb_put(skb, hdrlen);
+ hdr = (struct ieee80211_hdr_4addr *) skb_put(skb, hdrlen);
if (body)
memcpy(skb_put(skb, body_len), body, body_len);
@@ -1256,14 +1256,14 @@
}
skb = dev_alloc_skb(WLAN_AUTH_CHALLENGE_LEN +
- ap->crypt->extra_prefix_len +
- ap->crypt->extra_postfix_len);
+ ap->crypt->extra_mpdu_prefix_len +
+ ap->crypt->extra_mpdu_postfix_len);
if (skb == NULL) {
kfree(tmpbuf);
return NULL;
}
- skb_reserve(skb, ap->crypt->extra_prefix_len);
+ skb_reserve(skb, ap->crypt->extra_mpdu_prefix_len);
memset(skb_put(skb, WLAN_AUTH_CHALLENGE_LEN), 0,
WLAN_AUTH_CHALLENGE_LEN);
if (ap->crypt->encrypt_mpdu(skb, 0, ap->crypt_priv)) {
@@ -1272,7 +1272,7 @@
return NULL;
}
- memcpy(tmpbuf, skb->data + ap->crypt->extra_prefix_len,
+ memcpy(tmpbuf, skb->data + ap->crypt->extra_mpdu_prefix_len,
WLAN_AUTH_CHALLENGE_LEN);
dev_kfree_skb(skb);
@@ -1285,7 +1285,7 @@
struct hostap_80211_rx_status *rx_stats)
{
struct net_device *dev = local->dev;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data;
size_t hdrlen;
struct ap_data *ap = local->ap;
char body[8 + WLAN_AUTH_CHALLENGE_LEN], *challenge = NULL;
@@ -1498,7 +1498,7 @@
struct hostap_80211_rx_status *rx_stats, int reassoc)
{
struct net_device *dev = local->dev;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data;
char body[12], *p, *lpos;
int len, left;
u16 *pos;
@@ -1705,7 +1705,7 @@
struct hostap_80211_rx_status *rx_stats)
{
struct net_device *dev = local->dev;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data;
char *body = (char *) (skb->data + IEEE80211_MGMT_HDR_LEN);
int len;
u16 reason_code, *pos;
@@ -1746,7 +1746,7 @@
struct hostap_80211_rx_status *rx_stats)
{
struct net_device *dev = local->dev;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data;
char *body = skb->data + IEEE80211_MGMT_HDR_LEN;
int len;
u16 reason_code, *pos;
@@ -1784,7 +1784,7 @@
/* Called only as a scheduled task for pending AP frames. */
static void ap_handle_data_nullfunc(local_info_t *local,
- struct ieee80211_hdr *hdr)
+ struct ieee80211_hdr_4addr *hdr)
{
struct net_device *dev = local->dev;
@@ -1801,7 +1801,7 @@
/* Called only as a scheduled task for pending AP frames. */
static void ap_handle_dropped_data(local_info_t *local,
- struct ieee80211_hdr *hdr)
+ struct ieee80211_hdr_4addr *hdr)
{
struct net_device *dev = local->dev;
struct sta_info *sta;
@@ -1860,7 +1860,7 @@
/* Called only as a scheduled task for pending AP frames. */
static void handle_pspoll(local_info_t *local,
- struct ieee80211_hdr *hdr,
+ struct ieee80211_hdr_4addr *hdr,
struct hostap_80211_rx_status *rx_stats)
{
struct net_device *dev = local->dev;
@@ -1979,7 +1979,7 @@
static void handle_beacon(local_info_t *local, struct sk_buff *skb,
struct hostap_80211_rx_status *rx_stats)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data;
char *body = skb->data + IEEE80211_MGMT_HDR_LEN;
int len, left;
u16 *pos, beacon_int, capability;
@@ -2137,11 +2137,11 @@
struct net_device *dev = local->dev;
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
u16 fc, type, stype;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
/* FIX: should give skb->len to handler functions and check that the
* buffer is long enough */
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
type = WLAN_FC_GET_TYPE(fc);
stype = WLAN_FC_GET_STYPE(fc);
@@ -2258,7 +2258,7 @@
struct hostap_interface *iface;
local_info_t *local;
u16 fc;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
iface = netdev_priv(dev);
local = iface->local;
@@ -2268,7 +2268,7 @@
local->stats.rx_packets++;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
if (local->ap->ap_policy == AP_OTHER_AP_SKIP_ALL &&
@@ -2289,7 +2289,7 @@
static void schedule_packet_send(local_info_t *local, struct sta_info *sta)
{
struct sk_buff *skb;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
struct hostap_80211_rx_status rx_stats;
if (skb_queue_empty(&sta->tx_buf))
@@ -2302,7 +2302,7 @@
return;
}
- hdr = (struct ieee80211_hdr *) skb_put(skb, 16);
+ hdr = (struct ieee80211_hdr_4addr *) skb_put(skb, 16);
/* Generate a fake pspoll frame to start packet delivery */
hdr->frame_ctl = __constant_cpu_to_le16(
@@ -2349,7 +2349,7 @@
qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
qual[count].updated = sta->last_rx_updated;
- sta->last_rx_updated = 0;
+ sta->last_rx_updated = IW_QUAL_DBM;
count++;
if (count >= buf_size)
@@ -2467,7 +2467,7 @@
}
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
- sta->last_rx_updated = 0;
+ sta->last_rx_updated = IW_QUAL_DBM;
/* To be continued, we should make good use of IWEVCUSTOM */
}
@@ -2685,7 +2685,7 @@
struct sta_info *sta = NULL;
struct sk_buff *skb = tx->skb;
int set_tim, ret;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
struct hostap_skb_tx_data *meta;
meta = (struct hostap_skb_tx_data *) skb->cb;
@@ -2694,7 +2694,7 @@
meta->iface->type == HOSTAP_INTERFACE_STA)
goto out;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
if (hdr->addr1[0] & 0x01) {
/* broadcast/multicast frame - no AP related processing */
@@ -2821,10 +2821,10 @@
void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb)
{
struct sta_info *sta;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
struct hostap_skb_tx_data *meta;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
meta = (struct hostap_skb_tx_data *) skb->cb;
spin_lock(&local->ap->sta_table_lock);
@@ -2892,7 +2892,7 @@
/* Called only as a tasklet (software IRQ). Called for each RX frame to update
* STA power saving state. pwrmgt is a flag from 802.11 frame_ctl field. */
-int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr)
+int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr_4addr *hdr)
{
struct sta_info *sta;
u16 fc;
@@ -2925,12 +2925,12 @@
int ret;
struct sta_info *sta;
u16 fc, type, stype;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
if (local->ap == NULL)
return AP_RX_CONTINUE;
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr_4addr *) skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
type = WLAN_FC_GET_TYPE(fc);
@@ -3058,7 +3058,7 @@
/* Called only as a tasklet (software IRQ) */
int hostap_handle_sta_crypto(local_info_t *local,
- struct ieee80211_hdr *hdr,
+ struct ieee80211_hdr_4addr *hdr,
struct ieee80211_crypt_data **crypt,
void **sta_ptr)
{
@@ -3160,7 +3160,7 @@
/* Called only as a tasklet (software IRQ) */
int hostap_update_rx_stats(struct ap_data *ap,
- struct ieee80211_hdr *hdr,
+ struct ieee80211_hdr_4addr *hdr,
struct hostap_80211_rx_status *rx_stats)
{
struct sta_info *sta;
@@ -3174,7 +3174,7 @@
sta->last_rx_silence = rx_stats->noise;
sta->last_rx_signal = rx_stats->signal;
sta->last_rx_rate = rx_stats->rate;
- sta->last_rx_updated = 7;
+ sta->last_rx_updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
if (rx_stats->rate == 10)
sta->rx_count[0]++;
else if (rx_stats->rate == 20)
diff --git a/drivers/net/wireless/hostap/hostap_ap.h b/drivers/net/wireless/hostap/hostap_ap.h
index 816a52b..6d00df6 100644
--- a/drivers/net/wireless/hostap/hostap_ap.h
+++ b/drivers/net/wireless/hostap/hostap_ap.h
@@ -233,7 +233,7 @@
ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx);
void hostap_handle_sta_release(void *ptr);
void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb);
-int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr);
+int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr_4addr *hdr);
typedef enum {
AP_RX_CONTINUE, AP_RX_DROP, AP_RX_EXIT, AP_RX_CONTINUE_NOT_AUTHORIZED
} ap_rx_ret;
@@ -241,13 +241,13 @@
struct sk_buff *skb,
struct hostap_80211_rx_status *rx_stats,
int wds);
-int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr *hdr,
+int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr_4addr *hdr,
struct ieee80211_crypt_data **crypt,
void **sta_ptr);
int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr);
int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr);
int hostap_add_sta(struct ap_data *ap, u8 *sta_addr);
-int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr *hdr,
+int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr_4addr *hdr,
struct hostap_80211_rx_status *rx_stats);
void hostap_update_rates(local_info_t *local);
void hostap_add_wds_links(local_info_t *local);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index faa83ba..2643976 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -492,42 +492,10 @@
}
-static int prism2_pccard_dev_open(local_info_t *local)
-{
- struct hostap_cs_priv *hw_priv = local->hw_priv;
- hw_priv->link->open++;
- return 0;
-}
-
-
-static int prism2_pccard_dev_close(local_info_t *local)
-{
- struct hostap_cs_priv *hw_priv;
-
- if (local == NULL || local->hw_priv == NULL)
- return 1;
- hw_priv = local->hw_priv;
- if (hw_priv->link == NULL)
- return 1;
-
- if (!hw_priv->link->open) {
- printk(KERN_WARNING "%s: prism2_pccard_dev_close(): "
- "link not open?!\n", local->dev->name);
- return 1;
- }
-
- hw_priv->link->open--;
-
- return 0;
-}
-
-
static struct prism2_helper_functions prism2_pccard_funcs =
{
.card_present = prism2_pccard_card_present,
.cor_sreset = prism2_pccard_cor_sreset,
- .dev_open = prism2_pccard_dev_open,
- .dev_close = prism2_pccard_dev_close,
.genesis_reset = prism2_pccard_genesis_reset,
.hw_type = HOSTAP_HW_PCCARD,
};
@@ -597,13 +565,14 @@
*linkp = link->next;
/* release net devices */
if (link->priv) {
+ struct hostap_cs_priv *hw_priv;
struct net_device *dev;
struct hostap_interface *iface;
dev = link->priv;
iface = netdev_priv(dev);
- kfree(iface->local->hw_priv);
- iface->local->hw_priv = NULL;
+ hw_priv = iface->local->hw_priv;
prism2_free_local_data(dev);
+ kfree(hw_priv);
}
kfree(link);
}
@@ -883,6 +852,13 @@
{
dev_link_t *link = args->client_data;
struct net_device *dev = (struct net_device *) link->priv;
+ int dev_open = 0;
+
+ if (link->state & DEV_CONFIG) {
+ struct hostap_interface *iface = netdev_priv(dev);
+ if (iface && iface->local)
+ dev_open = iface->local->num_dev_open > 0;
+ }
switch (event) {
case CS_EVENT_CARD_INSERTION:
@@ -911,7 +887,7 @@
case CS_EVENT_RESET_PHYSICAL:
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_RESET_PHYSICAL\n", dev_info);
if (link->state & DEV_CONFIG) {
- if (link->open) {
+ if (dev_open) {
netif_stop_queue(dev);
netif_device_detach(dev);
}
@@ -931,8 +907,8 @@
pcmcia_request_configuration(link->handle,
&link->conf);
prism2_hw_shutdown(dev, 1);
- prism2_hw_config(dev, link->open ? 0 : 1);
- if (link->open) {
+ prism2_hw_config(dev, dev_open ? 0 : 1);
+ if (dev_open) {
netif_device_attach(dev);
netif_start_queue(dev);
}
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index e533a66..59fc155 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -3322,6 +3322,18 @@
iface = netdev_priv(dev);
local = iface->local;
+ /* Unregister all netdevs before freeing local data. */
+ list_for_each_safe(ptr, n, &local->hostap_interfaces) {
+ iface = list_entry(ptr, struct hostap_interface, list);
+ if (iface->type == HOSTAP_INTERFACE_MASTER) {
+ /* special handling for this interface below */
+ continue;
+ }
+ hostap_remove_interface(iface->dev, 0, 1);
+ }
+
+ unregister_netdev(local->dev);
+
flush_scheduled_work();
if (timer_pending(&local->crypt_deinit_timer))
@@ -3382,15 +3394,6 @@
prism2_download_free_data(local->dl_sec);
#endif /* PRISM2_DOWNLOAD_SUPPORT */
- list_for_each_safe(ptr, n, &local->hostap_interfaces) {
- iface = list_entry(ptr, struct hostap_interface, list);
- if (iface->type == HOSTAP_INTERFACE_MASTER) {
- /* special handling for this interface below */
- continue;
- }
- hostap_remove_interface(iface->dev, 0, 1);
- }
-
prism2_clear_set_tim_queue(local);
list_for_each_safe(ptr, n, &local->bss_list) {
@@ -3403,7 +3406,6 @@
kfree(local->last_scan_results);
kfree(local->generic_elem);
- unregister_netdev(local->dev);
free_netdev(local->dev);
}
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index e720369..2617d70 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -50,7 +50,8 @@
#endif /* in_atomic */
if (update && prism2_update_comms_qual(dev) == 0)
- wstats->qual.updated = 7;
+ wstats->qual.updated = IW_QUAL_ALL_UPDATED |
+ IW_QUAL_DBM;
wstats->qual.qual = local->comms_qual;
wstats->qual.level = local->avg_signal;
@@ -59,7 +60,7 @@
wstats->qual.qual = 0;
wstats->qual.level = 0;
wstats->qual.noise = 0;
- wstats->qual.updated = 0;
+ wstats->qual.updated = IW_QUAL_ALL_INVALID;
}
return wstats;
@@ -551,7 +552,6 @@
kfree(addr);
kfree(qual);
-
return 0;
}
@@ -1827,13 +1827,6 @@
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN);
- /* FIX:
- * I do not know how this is possible, but iwe_stream_add_event
- * seems to re-order memcpy execution so that len is set only
- * after copying.. Pre-setting len here "fixes" this, but real
- * problems should be solved (after which these iwe.len
- * settings could be removed from this function). */
- iwe.len = IW_EV_ADDR_LEN;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_ADDR_LEN);
@@ -1843,7 +1836,6 @@
iwe.cmd = SIOCGIWESSID;
iwe.u.data.length = ssid_len;
iwe.u.data.flags = 1;
- iwe.len = IW_EV_POINT_LEN + iwe.u.data.length;
current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ssid);
memset(&iwe, 0, sizeof(iwe));
@@ -1859,7 +1851,6 @@
iwe.u.mode = IW_MODE_MASTER;
else
iwe.u.mode = IW_MODE_ADHOC;
- iwe.len = IW_EV_UINT_LEN;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_UINT_LEN);
}
@@ -1877,7 +1868,6 @@
if (chan > 0) {
iwe.u.freq.m = freq_list[le16_to_cpu(chan - 1)] * 100000;
iwe.u.freq.e = 1;
- iwe.len = IW_EV_FREQ_LEN;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
}
@@ -1894,7 +1884,10 @@
iwe.u.qual.noise =
HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl));
}
- iwe.len = IW_EV_QUAL_LEN;
+ iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED
+ | IW_QUAL_NOISE_UPDATED
+ | IW_QUAL_QUAL_INVALID
+ | IW_QUAL_DBM;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_QUAL_LEN);
}
@@ -1906,7 +1899,6 @@
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
- iwe.len = IW_EV_POINT_LEN + iwe.u.data.length;
current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, "");
/* TODO: add SuppRates into BSS table */
@@ -1930,7 +1922,7 @@
}
/* TODO: add BeaconInt,resp_rate,atim into BSS table */
- buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_KERNEL);
+ buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_ATOMIC);
if (buf && scan) {
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVCUSTOM;
@@ -3088,9 +3080,7 @@
ret = local->func->download(local, param);
out:
- if (param != NULL)
- kfree(param);
-
+ kfree(param);
return ret;
}
#endif /* PRISM2_DOWNLOAD_SUPPORT */
@@ -3897,9 +3887,7 @@
}
out:
- if (param != NULL)
- kfree(param);
-
+ kfree(param);
return ret;
}
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index 025f8cd..da0c80f 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -59,11 +59,13 @@
static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
{
struct hostap_interface *iface;
+ struct hostap_pci_priv *hw_priv;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
+ hw_priv = local->hw_priv;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
@@ -74,12 +76,14 @@
static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
{
struct hostap_interface *iface;
+ struct hostap_pci_priv *hw_priv;
local_info_t *local;
unsigned long flags;
u8 v;
iface = netdev_priv(dev);
local = iface->local;
+ hw_priv = local->hw_priv;
spin_lock_irqsave(&local->lock, flags);
v = readb(hw_priv->mem_start + a);
@@ -91,11 +95,13 @@
static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
{
struct hostap_interface *iface;
+ struct hostap_pci_priv *hw_priv;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
+ hw_priv = local->hw_priv;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
@@ -106,12 +112,14 @@
static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
{
struct hostap_interface *iface;
+ struct hostap_pci_priv *hw_priv;
local_info_t *local;
unsigned long flags;
u16 v;
iface = netdev_priv(dev);
local = iface->local;
+ hw_priv = local->hw_priv;
spin_lock_irqsave(&local->lock, flags);
v = readw(hw_priv->mem_start + a);
@@ -277,8 +285,6 @@
{
.card_present = NULL,
.cor_sreset = prism2_pci_cor_sreset,
- .dev_open = NULL,
- .dev_close = NULL,
.genesis_reset = prism2_pci_genesis_reset,
.hw_type = HOSTAP_HW_PCI,
};
@@ -352,8 +358,6 @@
return hostap_hw_ready(dev);
fail:
- kfree(hw_priv);
-
if (irq_registered && dev)
free_irq(dev->irq, dev);
@@ -364,10 +368,8 @@
err_out_disable:
pci_disable_device(pdev);
- kfree(hw_priv);
- if (local)
- local->hw_priv = NULL;
prism2_free_local_data(dev);
+ kfree(hw_priv);
return -ENODEV;
}
@@ -392,9 +394,8 @@
free_irq(dev->irq, dev);
mem_start = hw_priv->mem_start;
- kfree(hw_priv);
- iface->local->hw_priv = NULL;
prism2_free_local_data(dev);
+ kfree(hw_priv);
iounmap(mem_start);
@@ -441,7 +442,7 @@
MODULE_DEVICE_TABLE(pci, prism2_pci_id_table);
static struct pci_driver prism2_pci_drv_id = {
- .name = "prism2_pci",
+ .name = "hostap_pci",
.id_table = prism2_pci_id_table,
.probe = prism2_pci_probe,
.remove = prism2_pci_remove,
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index 474ef83..78d67b408 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -328,8 +328,6 @@
{
.card_present = NULL,
.cor_sreset = prism2_plx_cor_sreset,
- .dev_open = NULL,
- .dev_close = NULL,
.genesis_reset = prism2_plx_genesis_reset,
.hw_type = HOSTAP_HW_PLX,
};
@@ -570,10 +568,8 @@
return hostap_hw_ready(dev);
fail:
- kfree(hw_priv);
- if (local)
- local->hw_priv = NULL;
prism2_free_local_data(dev);
+ kfree(hw_priv);
if (irq_registered && dev)
free_irq(dev->irq, dev);
@@ -606,9 +602,8 @@
if (dev->irq)
free_irq(dev->irq, dev);
- kfree(iface->local->hw_priv);
- iface->local->hw_priv = NULL;
prism2_free_local_data(dev);
+ kfree(hw_priv);
pci_disable_device(pdev);
}
@@ -616,7 +611,7 @@
MODULE_DEVICE_TABLE(pci, prism2_plx_id_table);
static struct pci_driver prism2_plx_drv_id = {
- .name = "prism2_plx",
+ .name = "hostap_plx",
.id_table = prism2_plx_id_table,
.probe = prism2_plx_probe,
.remove = prism2_plx_remove,
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index cc061e1..cfd8015 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -552,8 +552,6 @@
* (hostap_{cs,plx,pci}.c */
int (*card_present)(local_info_t *local);
void (*cor_sreset)(local_info_t *local);
- int (*dev_open)(local_info_t *local);
- int (*dev_close)(local_info_t *local);
void (*genesis_reset)(local_info_t *local, int hcr);
/* the following functions are from hostap_hw.c, but they may have some
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 2414e64..ad7f8cd 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -800,8 +800,7 @@
* doesn't seem to have as many firmware restart cycles...
*
* As a test, we're sticking in a 1/100s delay here */
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(HZ / 100);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(10));
return 0;
@@ -1256,8 +1255,7 @@
IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
i = 5000;
do {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(40 * HZ / 1000);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(40));
/* Todo... wait for sync command ... */
read_register(priv->net_dev, IPW_REG_INTA, &inta);
@@ -1411,8 +1409,7 @@
(val2 & IPW2100_COMMAND_PHY_OFF))
return 0;
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(HW_PHY_OFF_LOOP_DELAY);
+ schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
}
return -EIO;
@@ -1466,7 +1463,7 @@
static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
{
-#define HW_POWER_DOWN_DELAY (HZ / 10)
+#define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
struct host_command cmd = {
.host_command = HOST_PRE_POWER_DOWN,
@@ -1520,10 +1517,8 @@
printk(KERN_WARNING DRV_NAME ": "
"%s: Power down command failed: Error %d\n",
priv->net_dev->name, err);
- else {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(HW_POWER_DOWN_DELAY);
- }
+ else
+ schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
}
priv->status &= ~STATUS_ENABLED;
@@ -2953,7 +2948,7 @@
int next = txq->next;
int i = 0;
struct ipw2100_data_header *ipw_hdr;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_3addr *hdr;
while (!list_empty(&priv->tx_pend_list)) {
/* if there isn't enough space in TBD queue, then
@@ -2989,7 +2984,7 @@
packet->index = txq->next;
ipw_hdr = packet->info.d_struct.data;
- hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb->
+ hdr = (struct ieee80211_hdr_3addr *)packet->info.d_struct.txb->
fragments[0]->data;
if (priv->ieee->iw_mode == IW_MODE_INFRA) {
@@ -3274,7 +3269,8 @@
return IRQ_NONE;
}
-static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev)
+static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev,
+ int pri)
{
struct ipw2100_priv *priv = ieee80211_priv(dev);
struct list_head *element;
diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h
index 2a3cdbd..c9e99ce 100644
--- a/drivers/net/wireless/ipw2100.h
+++ b/drivers/net/wireless/ipw2100.h
@@ -808,7 +808,7 @@
struct ipw2100_rx {
union {
unsigned char payload[IPW_RX_NIC_BUFFER_LENGTH];
- struct ieee80211_hdr header;
+ struct ieee80211_hdr_4addr header;
u32 status;
struct ipw2100_notification notification;
struct ipw2100_cmd_header command;
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index b7f275c..3db0c32 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -4030,6 +4030,10 @@
int i;
rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL);
+ if (unlikely(!rxq)) {
+ IPW_ERROR("memory allocation failed\n");
+ return NULL;
+ }
memset(rxq, 0, sizeof(*rxq));
spin_lock_init(&rxq->lock);
INIT_LIST_HEAD(&rxq->rx_free);
@@ -4904,7 +4908,7 @@
{
struct ipw_rx_mem_buffer *rxb;
struct ipw_rx_packet *pkt;
- struct ieee80211_hdr *header;
+ struct ieee80211_hdr_4addr *header;
u32 r, w, i;
u8 network_packet;
@@ -4967,8 +4971,9 @@
#endif
header =
- (struct ieee80211_hdr *)(rxb->skb->data +
- IPW_RX_FRAME_SIZE);
+ (struct ieee80211_hdr_4addr *)(rxb->skb->
+ data +
+ IPW_RX_FRAME_SIZE);
/* TODO: Check Ad-Hoc dest/source and make sure
* that we are actually parsing these packets
* correctly -- we should probably use the
@@ -5317,8 +5322,6 @@
IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
return ipw_set_channel(priv, (u8) fwrq->m);
-
- return 0;
}
static int ipw_wx_get_freq(struct net_device *dev,
@@ -6010,12 +6013,12 @@
}
if (priv->adapter == IPW_2915ABG) {
- priv->ieee->abg_ture = 1;
+ priv->ieee->abg_true = 1;
if (mode & IEEE_A) {
band |= IEEE80211_52GHZ_BAND;
modulation |= IEEE80211_OFDM_MODULATION;
} else
- priv->ieee->abg_ture = 0;
+ priv->ieee->abg_true = 0;
} else {
if (mode & IEEE_A) {
IPW_WARNING("Attempt to set 2200BG into "
@@ -6023,20 +6026,20 @@
return -EINVAL;
}
- priv->ieee->abg_ture = 0;
+ priv->ieee->abg_true = 0;
}
if (mode & IEEE_B) {
band |= IEEE80211_24GHZ_BAND;
modulation |= IEEE80211_CCK_MODULATION;
} else
- priv->ieee->abg_ture = 0;
+ priv->ieee->abg_true = 0;
if (mode & IEEE_G) {
band |= IEEE80211_24GHZ_BAND;
modulation |= IEEE80211_OFDM_MODULATION;
} else
- priv->ieee->abg_ture = 0;
+ priv->ieee->abg_true = 0;
priv->ieee->mode = mode;
priv->ieee->freq_band = band;
@@ -6325,7 +6328,7 @@
static inline void ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)
+ struct ieee80211_hdr_3addr *hdr = (struct ieee80211_hdr_3addr *)
txb->fragments[0]->data;
int i = 0;
struct tfd_frame *tfd;
@@ -6448,7 +6451,7 @@
}
static int ipw_net_hard_start_xmit(struct ieee80211_txb *txb,
- struct net_device *dev)
+ struct net_device *dev, int pri)
{
struct ipw_priv *priv = ieee80211_priv(dev);
unsigned long flags;
@@ -7108,7 +7111,7 @@
printk(KERN_INFO DRV_NAME
": Detected Intel PRO/Wireless 2915ABG Network "
"Connection\n");
- priv->ieee->abg_ture = 1;
+ priv->ieee->abg_true = 1;
band = IEEE80211_52GHZ_BAND | IEEE80211_24GHZ_BAND;
modulation = IEEE80211_OFDM_MODULATION |
IEEE80211_CCK_MODULATION;
@@ -7124,7 +7127,7 @@
": Detected Intel PRO/Wireless 2200BG Network "
"Connection\n");
- priv->ieee->abg_ture = 0;
+ priv->ieee->abg_true = 0;
band = IEEE80211_24GHZ_BAND;
modulation = IEEE80211_OFDM_MODULATION |
IEEE80211_CCK_MODULATION;
diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h
index 5b00882..e9cf32b 100644
--- a/drivers/net/wireless/ipw2200.h
+++ b/drivers/net/wireless/ipw2200.h
@@ -1654,12 +1654,12 @@
#define IPW_MAX_CONFIG_RETRIES 10
-static inline u32 frame_hdr_len(struct ieee80211_hdr *hdr)
+static inline u32 frame_hdr_len(struct ieee80211_hdr_4addr *hdr)
{
u32 retval;
u16 fc;
- retval = sizeof(struct ieee80211_hdr);
+ retval = sizeof(struct ieee80211_hdr_3addr);
fc = le16_to_cpu(hdr->frame_ctl);
/*
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index ca6c03c..92793b9 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -57,9 +57,7 @@
#include <linux/bitops.h>
#ifdef CONFIG_NET_RADIO
#include <linux/wireless.h>
-#if WIRELESS_EXT > 12
#include <net/iw_handler.h>
-#endif /* WIRELESS_EXT > 12 */
#endif
#include <pcmcia/cs_types.h>
@@ -225,10 +223,7 @@
static struct net_device_stats *netwave_get_stats(struct net_device *dev);
/* Wireless extensions */
-#ifdef WIRELESS_EXT
static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev);
-#endif
-static int netwave_ioctl(struct net_device *, struct ifreq *, int);
static void set_multicast_list(struct net_device *dev);
@@ -260,26 +255,7 @@
because they generally can't be allocated dynamically.
*/
-#if WIRELESS_EXT <= 12
-/* Wireless extensions backward compatibility */
-
-/* Part of iw_handler prototype we need */
-struct iw_request_info
-{
- __u16 cmd; /* Wireless Extension command */
- __u16 flags; /* More to come ;-) */
-};
-
-/* Wireless Extension Backward compatibility - Jean II
- * If the new wireless device private ioctl range is not defined,
- * default to standard device private ioctl range */
-#ifndef SIOCIWFIRSTPRIV
-#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
-#endif /* SIOCIWFIRSTPRIV */
-
-#else /* WIRELESS_EXT <= 12 */
static const struct iw_handler_def netwave_handler_def;
-#endif /* WIRELESS_EXT <= 12 */
#define SIOCGIPSNAP SIOCIWFIRSTPRIV + 1 /* Site Survey Snapshot */
@@ -319,9 +295,7 @@
struct timer_list watchdog; /* To avoid blocking state */
struct site_survey nss;
struct net_device_stats stats;
-#ifdef WIRELESS_EXT
struct iw_statistics iw_stats; /* Wireless stats */
-#endif
} netwave_private;
#ifdef NETWAVE_STATS
@@ -353,7 +327,6 @@
while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ;
}
-#ifdef WIRELESS_EXT
static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase,
kio_addr_t iobase) {
u_short resultBuffer;
@@ -376,9 +349,7 @@
sizeof(struct site_survey));
}
}
-#endif
-#ifdef WIRELESS_EXT
/*
* Function netwave_get_wireless_stats (dev)
*
@@ -411,7 +382,6 @@
return &priv->iw_stats;
}
-#endif
/*
* Function netwave_attach (void)
@@ -471,13 +441,7 @@
dev->get_stats = &netwave_get_stats;
dev->set_multicast_list = &set_multicast_list;
/* wireless extensions */
-#if WIRELESS_EXT <= 16
- dev->get_wireless_stats = &netwave_get_wireless_stats;
-#endif /* WIRELESS_EXT <= 16 */
-#if WIRELESS_EXT > 12
dev->wireless_handlers = (struct iw_handler_def *)&netwave_handler_def;
-#endif /* WIRELESS_EXT > 12 */
- dev->do_ioctl = &netwave_ioctl;
dev->tx_timeout = &netwave_watchdog;
dev->watchdog_timeo = TX_TIMEOUT;
@@ -576,13 +540,8 @@
/* Disable interrupts & save flags */
spin_lock_irqsave(&priv->spinlock, flags);
-#if WIRELESS_EXT > 8
if(!wrqu->nwid.disabled) {
domain = wrqu->nwid.value;
-#else /* WIRELESS_EXT > 8 */
- if(wrqu->nwid.on) {
- domain = wrqu->nwid.nwid;
-#endif /* WIRELESS_EXT > 8 */
printk( KERN_DEBUG "Setting domain to 0x%x%02x\n",
(domain >> 8) & 0x01, domain & 0xff);
wait_WOC(iobase);
@@ -606,15 +565,9 @@
union iwreq_data *wrqu,
char *extra)
{
-#if WIRELESS_EXT > 8
wrqu->nwid.value = domain;
wrqu->nwid.disabled = 0;
wrqu->nwid.fixed = 1;
-#else /* WIRELESS_EXT > 8 */
- wrqu->nwid.nwid = domain;
- wrqu->nwid.on = 1;
-#endif /* WIRELESS_EXT > 8 */
-
return 0;
}
@@ -657,17 +610,11 @@
{
key[1] = scramble_key & 0xff;
key[0] = (scramble_key>>8) & 0xff;
-#if WIRELESS_EXT > 8
wrqu->encoding.flags = IW_ENCODE_ENABLED;
wrqu->encoding.length = 2;
-#else /* WIRELESS_EXT > 8 */
- wrqu->encoding.method = 1;
-#endif /* WIRELESS_EXT > 8 */
-
return 0;
}
-#if WIRELESS_EXT > 8
/*
* Wireless Handler : get mode
*/
@@ -683,7 +630,6 @@
return 0;
}
-#endif /* WIRELESS_EXT > 8 */
/*
* Wireless Handler : get range info
@@ -702,11 +648,9 @@
/* Set all the info we don't care or don't know about to zero */
memset(range, 0, sizeof(struct iw_range));
-#if WIRELESS_EXT > 10
/* Set the Wireless Extension versions */
range->we_version_compiled = WIRELESS_EXT;
range->we_version_source = 9; /* Nothing for us in v10 and v11 */
-#endif /* WIRELESS_EXT > 10 */
/* Set information in the range struct */
range->throughput = 450 * 1000; /* don't argue on this ! */
@@ -720,16 +664,12 @@
range->max_qual.level = 255;
range->max_qual.noise = 0;
-#if WIRELESS_EXT > 7
range->num_bitrates = 1;
range->bitrate[0] = 1000000; /* 1 Mb/s */
-#endif /* WIRELESS_EXT > 7 */
-#if WIRELESS_EXT > 8
range->encoding_size[0] = 2; /* 16 bits scrambling */
range->num_encoding_sizes = 1;
range->max_encoding_tokens = 1; /* Only one key possible */
-#endif /* WIRELESS_EXT > 8 */
return ret;
}
@@ -775,8 +715,6 @@
"getsitesurvey" },
};
-#if WIRELESS_EXT > 12
-
static const iw_handler netwave_handler[] =
{
NULL, /* SIOCSIWNAME */
@@ -839,131 +777,8 @@
.standard = (iw_handler *) netwave_handler,
.private = (iw_handler *) netwave_private_handler,
.private_args = (struct iw_priv_args *) netwave_private_args,
-#if WIRELESS_EXT > 16
.get_wireless_stats = netwave_get_wireless_stats,
-#endif /* WIRELESS_EXT > 16 */
};
-#endif /* WIRELESS_EXT > 12 */
-
-/*
- * Function netwave_ioctl (dev, rq, cmd)
- *
- * Perform ioctl : config & info stuff
- * This is the stuff that are treated the wireless extensions (iwconfig)
- *
- */
-static int netwave_ioctl(struct net_device *dev, /* ioctl device */
- struct ifreq *rq, /* Data passed */
- int cmd) /* Ioctl number */
-{
- int ret = 0;
-#ifdef WIRELESS_EXT
-#if WIRELESS_EXT <= 12
- struct iwreq *wrq = (struct iwreq *) rq;
-#endif
-#endif
-
- DEBUG(0, "%s: ->netwave_ioctl(cmd=0x%X)\n", dev->name, cmd);
-
- /* Look what is the request */
- switch(cmd) {
- /* --------------- WIRELESS EXTENSIONS --------------- */
-#ifdef WIRELESS_EXT
-#if WIRELESS_EXT <= 12
- case SIOCGIWNAME:
- netwave_get_name(dev, NULL, &(wrq->u), NULL);
- break;
- case SIOCSIWNWID:
- ret = netwave_set_nwid(dev, NULL, &(wrq->u), NULL);
- break;
- case SIOCGIWNWID:
- ret = netwave_get_nwid(dev, NULL, &(wrq->u), NULL);
- break;
-#if WIRELESS_EXT > 8 /* Note : The API did change... */
- case SIOCGIWENCODE:
- /* Get scramble key */
- if(wrq->u.encoding.pointer != (caddr_t) 0)
- {
- char key[2];
- ret = netwave_get_scramble(dev, NULL, &(wrq->u), key);
- if(copy_to_user(wrq->u.encoding.pointer, key, 2))
- ret = -EFAULT;
- }
- break;
- case SIOCSIWENCODE:
- /* Set scramble key */
- if(wrq->u.encoding.pointer != (caddr_t) 0)
- {
- char key[2];
- if(copy_from_user(key, wrq->u.encoding.pointer, 2))
- {
- ret = -EFAULT;
- break;
- }
- ret = netwave_set_scramble(dev, NULL, &(wrq->u), key);
- }
- break;
- case SIOCGIWMODE:
- /* Mode of operation */
- ret = netwave_get_mode(dev, NULL, &(wrq->u), NULL);
- break;
-#else /* WIRELESS_EXT > 8 */
- case SIOCGIWENCODE:
- /* Get scramble key */
- ret = netwave_get_scramble(dev, NULL, &(wrq->u),
- (char *) &wrq->u.encoding.code);
- break;
- case SIOCSIWENCODE:
- /* Set scramble key */
- ret = netwave_set_scramble(dev, NULL, &(wrq->u),
- (char *) &wrq->u.encoding.code);
- break;
-#endif /* WIRELESS_EXT > 8 */
- case SIOCGIWRANGE:
- /* Basic checking... */
- if(wrq->u.data.pointer != (caddr_t) 0) {
- struct iw_range range;
- ret = netwave_get_range(dev, NULL, &(wrq->u), (char *) &range);
- if (copy_to_user(wrq->u.data.pointer, &range,
- sizeof(struct iw_range)))
- ret = -EFAULT;
- }
- break;
- case SIOCGIWPRIV:
- /* Basic checking... */
- if(wrq->u.data.pointer != (caddr_t) 0) {
- /* Set the number of ioctl available */
- wrq->u.data.length = sizeof(netwave_private_args) / sizeof(netwave_private_args[0]);
-
- /* Copy structure to the user buffer */
- if(copy_to_user(wrq->u.data.pointer,
- (u_char *) netwave_private_args,
- sizeof(netwave_private_args)))
- ret = -EFAULT;
- }
- break;
- case SIOCGIPSNAP:
- if(wrq->u.data.pointer != (caddr_t) 0) {
- char buffer[sizeof( struct site_survey)];
- ret = netwave_get_snap(dev, NULL, &(wrq->u), buffer);
- /* Copy structure to the user buffer */
- if(copy_to_user(wrq->u.data.pointer,
- buffer,
- sizeof( struct site_survey)))
- {
- printk(KERN_DEBUG "Bad buffer!\n");
- break;
- }
- }
- break;
-#endif /* WIRELESS_EXT <= 12 */
-#endif /* WIRELESS_EXT */
- default:
- ret = -EOPNOTSUPP;
- }
-
- return ret;
-}
/*
* Function netwave_pcmcia_config (link)
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 15ceaf6..488ab06 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -77,30 +77,16 @@
#define DRIVER_NAME "orinoco"
#include <linux/config.h>
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
#include <linux/netdevice.h>
-#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <net/ieee80211.h>
-#include <net/ieee80211.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include "hermes.h"
#include "hermes_rid.h"
#include "orinoco.h"
@@ -137,7 +123,7 @@
/* We do this this way to avoid ifdefs in the actual code */
#ifdef WIRELESS_SPY
-#define SPY_NUMBER(priv) (priv->spy_number)
+#define SPY_NUMBER(priv) (priv->spy_data.spy_number)
#else
#define SPY_NUMBER(priv) 0
#endif /* WIRELESS_SPY */
@@ -216,31 +202,32 @@
/********************************************************************/
/* Used in Event handling.
- * We avoid nested structres as they break on ARM -- Moustafa */
+ * We avoid nested structures as they break on ARM -- Moustafa */
struct hermes_tx_descriptor_802_11 {
/* hermes_tx_descriptor */
- u16 status;
- u16 reserved1;
- u16 reserved2;
- u32 sw_support;
+ __le16 status;
+ __le16 reserved1;
+ __le16 reserved2;
+ __le32 sw_support;
u8 retry_count;
u8 tx_rate;
- u16 tx_control;
+ __le16 tx_control;
- /* ieee802_11_hdr */
- u16 frame_ctl;
- u16 duration_id;
+ /* ieee80211_hdr */
+ __le16 frame_ctl;
+ __le16 duration_id;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
- u16 seq_ctl;
+ __le16 seq_ctl;
u8 addr4[ETH_ALEN];
- u16 data_len;
+
+ __le16 data_len;
/* ethhdr */
- unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
- unsigned char h_source[ETH_ALEN]; /* source ether addr */
- unsigned short h_proto; /* packet type ID field */
+ u8 h_dest[ETH_ALEN]; /* destination eth addr */
+ u8 h_source[ETH_ALEN]; /* source ether addr */
+ __be16 h_proto; /* packet type ID field */
/* p8022_hdr */
u8 dsap;
@@ -248,31 +235,31 @@
u8 ctrl;
u8 oui[3];
- u16 ethertype;
+ __be16 ethertype;
} __attribute__ ((packed));
/* Rx frame header except compatibility 802.3 header */
struct hermes_rx_descriptor {
/* Control */
- u16 status;
- u32 time;
+ __le16 status;
+ __le32 time;
u8 silence;
u8 signal;
u8 rate;
u8 rxflow;
- u32 reserved;
+ __le32 reserved;
/* 802.11 header */
- u16 frame_ctl;
- u16 duration_id;
+ __le16 frame_ctl;
+ __le16 duration_id;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
- u16 seq_ctl;
+ __le16 seq_ctl;
u8 addr4[ETH_ALEN];
/* Data length */
- u16 data_len;
+ __le16 data_len;
} __attribute__ ((packed));
/********************************************************************/
@@ -396,14 +383,14 @@
/* If a spy address is defined, we report stats of the
* first spy address - Jean II */
if (SPY_NUMBER(priv)) {
- wstats->qual.qual = priv->spy_stat[0].qual;
- wstats->qual.level = priv->spy_stat[0].level;
- wstats->qual.noise = priv->spy_stat[0].noise;
- wstats->qual.updated = priv->spy_stat[0].updated;
+ wstats->qual.qual = priv->spy_data.spy_stat[0].qual;
+ wstats->qual.level = priv->spy_data.spy_stat[0].level;
+ wstats->qual.noise = priv->spy_data.spy_stat[0].noise;
+ wstats->qual.updated = priv->spy_data.spy_stat[0].updated;
}
} else {
struct {
- u16 qual, signal, noise;
+ __le16 qual, signal, noise;
} __attribute__ ((packed)) cq;
err = HERMES_READ_RECORD(hw, USER_BAP,
@@ -503,13 +490,12 @@
return 0;
}
- /* Check packet length, pad short packets, round up odd length */
+ /* Length of the packet body */
+ /* FIXME: what if the skb is smaller than this? */
len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN);
- if (skb->len < len) {
- skb = skb_padto(skb, len);
- if (skb == NULL)
- goto fail;
- }
+ skb = skb_padto(skb, len);
+ if (skb == NULL)
+ goto fail;
len -= ETH_HLEN;
eh = (struct ethhdr *)skb->data;
@@ -556,13 +542,21 @@
stats->tx_errors++;
goto fail;
}
+ /* Actual xfer length - allow for padding */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN - ETH_HLEN)
+ len = ETH_ZLEN - ETH_HLEN;
} else { /* IEEE 802.3 frame */
data_len = len + ETH_HLEN;
data_off = HERMES_802_3_OFFSET;
p = skb->data;
+ /* Actual xfer length - round up for odd length packets */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN)
+ len = ETH_ZLEN;
}
- err = hermes_bap_pwrite(hw, USER_BAP, p, data_len,
+ err = hermes_bap_pwrite_pad(hw, USER_BAP, p, data_len, len,
txfid, data_off);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
@@ -634,16 +628,17 @@
struct orinoco_private *priv = netdev_priv(dev);
struct net_device_stats *stats = &priv->stats;
u16 fid = hermes_read_regn(hw, TXCOMPLFID);
+ u16 status;
struct hermes_tx_descriptor_802_11 hdr;
int err = 0;
if (fid == DUMMY_FID)
return; /* Nothing's really happened */
- /* Read the frame header */
+ /* Read part of the frame header - we need status and addr1 */
err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
- sizeof(struct hermes_tx_descriptor) +
- sizeof(struct ieee80211_hdr),
+ offsetof(struct hermes_tx_descriptor_802_11,
+ addr2),
fid, 0);
hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
@@ -663,8 +658,8 @@
* exceeded, because that's the only status that really mean
* that this particular node went away.
* Other errors means that *we* screwed up. - Jean II */
- hdr.status = le16_to_cpu(hdr.status);
- if (hdr.status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
+ status = le16_to_cpu(hdr.status);
+ if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
union iwreq_data wrqu;
/* Copy 802.11 dest address.
@@ -723,18 +718,13 @@
static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
int level, int noise)
{
- struct orinoco_private *priv = netdev_priv(dev);
- int i;
-
- /* Gather wireless spy statistics: for each packet, compare the
- * source address with out list, and if match, get the stats... */
- for (i = 0; i < priv->spy_number; i++)
- if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) {
- priv->spy_stat[i].level = level - 0x95;
- priv->spy_stat[i].noise = noise - 0x95;
- priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0;
- priv->spy_stat[i].updated = 7;
- }
+ struct iw_quality wstats;
+ wstats.level = level - 0x95;
+ wstats.noise = noise - 0x95;
+ wstats.qual = (level > noise) ? (level - noise) : 0;
+ wstats.updated = 7;
+ /* Update spy records */
+ wireless_spy_update(dev, mac, &wstats);
}
static void orinoco_stat_gather(struct net_device *dev,
@@ -1055,7 +1045,7 @@
unsigned long flags;
struct join_req {
u8 bssid[ETH_ALEN];
- u16 channel;
+ __le16 channel;
} __attribute__ ((packed)) req;
const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
struct prism2_scan_apinfo *atom = NULL;
@@ -1070,7 +1060,7 @@
return;
if (orinoco_lock(priv, &flags) != 0)
- goto out;
+ goto fail_lock;
/* Sanity checks in case user changed something in the meantime */
if (! priv->bssid_fixed)
@@ -1115,8 +1105,10 @@
printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
out:
- kfree(buf);
orinoco_unlock(priv, &flags);
+
+ fail_lock:
+ kfree(buf);
}
/* Send new BSSID to userspace */
@@ -1134,12 +1126,14 @@
err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID,
ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
if (err != 0)
- return;
+ goto out;
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
/* Send event to user space */
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+
+ out:
orinoco_unlock(priv, &flags);
}
@@ -1148,8 +1142,8 @@
struct orinoco_private *priv = netdev_priv(dev);
u16 infofid;
struct {
- u16 len;
- u16 type;
+ __le16 len;
+ __le16 type;
} __attribute__ ((packed)) info;
int len, type;
int err;
@@ -2464,6 +2458,10 @@
dev->get_stats = orinoco_get_stats;
dev->ethtool_ops = &orinoco_ethtool_ops;
dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def;
+#ifdef WIRELESS_SPY
+ priv->wireless_data.spy_data = &priv->spy_data;
+ dev->wireless_data = &priv->wireless_data;
+#endif
dev->change_mtu = orinoco_change_mtu;
dev->set_multicast_list = orinoco_set_multicast_list;
/* we use the default eth_mac_addr for setting the MAC addr */
@@ -2835,7 +2833,7 @@
}
}
- if ((priv->iw_mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){
+ if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){
/* Quality stats meaningless in ad-hoc mode */
} else {
range->max_qual.qual = 0x8b - 0x2f;
@@ -2882,6 +2880,14 @@
range->min_r_time = 0;
range->max_r_time = 65535 * 1000; /* ??? */
+ /* Event capability (kernel) */
+ IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
+ /* Event capability (driver) */
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
+ IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
+
TRACE_EXIT(dev->name);
return 0;
@@ -3841,92 +3847,6 @@
return err;
}
-/* Spy is used for link quality/strength measurements in Ad-Hoc mode
- * Jean II */
-static int orinoco_ioctl_setspy(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *srq,
- char *extra)
-
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct sockaddr *address = (struct sockaddr *) extra;
- int number = srq->length;
- int i;
- unsigned long flags;
-
- /* Make sure nobody mess with the structure while we do */
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* orinoco_lock() doesn't disable interrupts, so make sure the
- * interrupt rx path don't get confused while we copy */
- priv->spy_number = 0;
-
- if (number > 0) {
- /* Extract the addresses */
- for (i = 0; i < number; i++)
- memcpy(priv->spy_address[i], address[i].sa_data,
- ETH_ALEN);
- /* Reset stats */
- memset(priv->spy_stat, 0,
- sizeof(struct iw_quality) * IW_MAX_SPY);
- /* Set number of addresses */
- priv->spy_number = number;
- }
-
- /* Now, let the others play */
- orinoco_unlock(priv, &flags);
-
- /* Do NOT call commit handler */
- return 0;
-}
-
-static int orinoco_ioctl_getspy(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *srq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct sockaddr *address = (struct sockaddr *) extra;
- int number;
- int i;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- number = priv->spy_number;
- /* Create address struct */
- for (i = 0; i < number; i++) {
- memcpy(address[i].sa_data, priv->spy_address[i], ETH_ALEN);
- address[i].sa_family = AF_UNIX;
- }
- if (number > 0) {
- /* Create address struct */
- for (i = 0; i < number; i++) {
- memcpy(address[i].sa_data, priv->spy_address[i],
- ETH_ALEN);
- address[i].sa_family = AF_UNIX;
- }
- /* Copy stats */
- /* In theory, we should disable irqs while copying the stats
- * because the rx path might update it in the middle...
- * Bah, who care ? - Jean II */
- memcpy(extra + (sizeof(struct sockaddr) * number),
- priv->spy_stat, sizeof(struct iw_quality) * number);
- }
- /* Reset updated flags. */
- for (i = 0; i < number; i++)
- priv->spy_stat[i].updated = 0;
-
- orinoco_unlock(priv, &flags);
-
- srq->length = number;
-
- return 0;
-}
-
/* Trigger a scan (look for other cells in the vicinity */
static int orinoco_ioctl_setscan(struct net_device *dev,
struct iw_request_info *info,
@@ -3999,7 +3919,7 @@
HERMES_HOSTSCAN_SYMBOL_BCAST);
break;
case FIRMWARE_TYPE_INTERSIL: {
- u16 req[3];
+ __le16 req[3];
req[0] = cpu_to_le16(0x3fff); /* All channels */
req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
@@ -4073,7 +3993,7 @@
case FIRMWARE_TYPE_INTERSIL:
offset = 4;
if (priv->has_hostscan) {
- atom_len = le16_to_cpup((u16 *)scan);
+ atom_len = le16_to_cpup((__le16 *)scan);
/* Sanity check for atom_len */
if (atom_len < sizeof(struct prism2_scan_apinfo)) {
printk(KERN_ERR "%s: Invalid atom_len in scan data: %d\n",
@@ -4357,8 +4277,10 @@
[SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens,
[SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens,
[SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange,
- [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setspy,
- [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getspy,
+ [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy,
+ [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy,
+ [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy,
+ [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy,
[SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap,
[SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap,
[SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan,
diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h
index 2f213a7..7a17bb3 100644
--- a/drivers/net/wireless/orinoco.h
+++ b/drivers/net/wireless/orinoco.h
@@ -7,12 +7,11 @@
#ifndef _ORINOCO_H
#define _ORINOCO_H
-#define DRIVER_VERSION "0.15rc2"
+#define DRIVER_VERSION "0.15rc3"
-#include <linux/types.h>
-#include <linux/spinlock.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
+#include <net/iw_handler.h>
#include <linux/version.h>
#include "hermes.h"
@@ -28,7 +27,7 @@
#define ORINOCO_MAX_KEYS 4
struct orinoco_key {
- u16 len; /* always stored as little-endian */
+ __le16 len; /* always stored as little-endian */
char data[ORINOCO_MAX_KEY_SIZE];
} __attribute__ ((packed));
@@ -36,14 +35,14 @@
/* 802.3 */
u8 dest[ETH_ALEN];
u8 src[ETH_ALEN];
- u16 len;
+ __be16 len;
/* 802.2 */
u8 dsap;
u8 ssap;
u8 ctrl;
/* SNAP */
u8 oui[3];
- u16 ethertype;
+ unsigned short ethertype;
} __attribute__ ((packed));
typedef enum {
@@ -112,9 +111,8 @@
u16 pm_on, pm_mcast, pm_period, pm_timeout;
u16 preamble;
#ifdef WIRELESS_SPY
- int spy_number;
- u_char spy_address[IW_MAX_SPY][ETH_ALEN];
- struct iw_quality spy_stat[IW_MAX_SPY];
+ struct iw_spy_data spy_data; /* iwspy support */
+ struct iw_public_data wireless_data;
#endif
/* Configuration dependent variables */
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index bedd7f9..dc1128a 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -14,33 +14,16 @@
#define PFX DRIVER_NAME ": "
#include <linux/config.h>
-#ifdef __IN_PCMCIA_PACKAGE__
-#include <pcmcia/k_compat.h>
-#endif /* __IN_PCMCIA_PACKAGE__ */
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/wireless.h>
-
+#include <linux/delay.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
#include "orinoco.h"
/********************************************************************/
@@ -97,17 +80,8 @@
/* Function prototypes */
/********************************************************************/
-/* device methods */
-static int orinoco_cs_hard_reset(struct orinoco_private *priv);
-
-/* PCMCIA gumpf */
-static void orinoco_cs_config(dev_link_t * link);
-static void orinoco_cs_release(dev_link_t * link);
-static int orinoco_cs_event(event_t event, int priority,
- event_callback_args_t * args);
-
-static dev_link_t *orinoco_cs_attach(void);
-static void orinoco_cs_detach(dev_link_t *);
+static void orinoco_cs_release(dev_link_t *link);
+static void orinoco_cs_detach(dev_link_t *link);
/********************************************************************/
/* Device methods */
@@ -603,49 +577,85 @@
"Pavel Roskin <proski@gnu.org>, et al)";
static struct pcmcia_device_id orinoco_cs_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
- PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a),
- PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001),
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305),
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613),
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673),
- PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001),
- PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
- PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021),
- PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
+ PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
+ PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
+ PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
+ PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
+ PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
+ PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+ PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
+ PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
+ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
+ PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
+ PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
+ PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
+ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
+ PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
- PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
+ PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
+ PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
+ PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
+ PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
+ PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
+ PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
+ PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+ PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
+ PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
+ PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
+ PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
+ PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
+ PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
+ PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
+ PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
+ PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
+ PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
+ PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
+ PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
+ PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
+ PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
+ PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
+ PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
- PCMCIA_DEVICE_PROD_ID1("Symbol Technologies", 0x3f02b4d6),
+ PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
+ PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
+ PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
+ PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
@@ -656,8 +666,8 @@
.name = DRIVER_NAME,
},
.attach = orinoco_cs_attach,
- .event = orinoco_cs_event,
.detach = orinoco_cs_detach,
+ .event = orinoco_cs_event,
.id_table = orinoco_cs_ids,
};
diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c
index 86fa58e..d8afd51 100644
--- a/drivers/net/wireless/orinoco_nortel.c
+++ b/drivers/net/wireless/orinoco_nortel.c
@@ -40,29 +40,13 @@
#define PFX DRIVER_NAME ": "
#include <linux/config.h>
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/list.h>
+#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/fcntl.h>
-
#include <pcmcia/cisreg.h>
-#include "hermes.h"
#include "orinoco.h"
#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */
@@ -108,7 +92,7 @@
return 0;
}
-int nortel_pci_hw_init(struct nortel_pci_card *card)
+static int nortel_pci_hw_init(struct nortel_pci_card *card)
{
int i;
u32 reg;
diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c
index 42e0343..5362c21 100644
--- a/drivers/net/wireless/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco_pci.c
@@ -93,28 +93,12 @@
#define PFX DRIVER_NAME ": "
#include <linux/config.h>
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/list.h>
+#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/fcntl.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include "hermes.h"
#include "orinoco.h"
/* All the magic there is from wlan-ng */
diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c
index 7ab05b8..210e737 100644
--- a/drivers/net/wireless/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco_plx.c
@@ -117,29 +117,13 @@
#define PFX DRIVER_NAME ": "
#include <linux/config.h>
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/list.h>
+#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/fcntl.h>
-
#include <pcmcia/cisreg.h>
-#include "hermes.h"
#include "orinoco.h"
#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */
diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c
index 85893f4..5e68b70 100644
--- a/drivers/net/wireless/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco_tmd.c
@@ -53,29 +53,13 @@
#define PFX DRIVER_NAME ": "
#include <linux/config.h>
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/list.h>
+#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/fcntl.h>
-
#include <pcmcia/cisreg.h>
-#include "hermes.h"
#include "orinoco.h"
#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 9a8790e..5c1a1ad 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -462,14 +462,12 @@
/* txpower is supported in dBm's */
range->txpower_capa = IW_TXPOW_DBM;
-#if WIRELESS_EXT > 16
/* Event capability (kernel + driver) */
range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) |
IW_EVENT_CAPA_MASK(SIOCGIWAP));
range->event_capa[1] = IW_EVENT_CAPA_K_1;
range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVCUSTOM);
-#endif /* WIRELESS_EXT > 16 */
if (islpci_get_state(priv) < PRV_STATE_INIT)
return 0;
@@ -693,14 +691,13 @@
extra + dwrq->length,
&(bsslist->bsslist[i]),
noise);
-#if WIRELESS_EXT > 16
+
/* Check if there is space for one more entry */
if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) {
/* Ask user space to try again with a bigger buffer */
rvalue = -E2BIG;
break;
}
-#endif /* WIRELESS_EXT > 16 */
}
kfree(bsslist);
@@ -2727,12 +2724,7 @@
.standard = (iw_handler *) prism54_handler,
.private = (iw_handler *) prism54_private_handler,
.private_args = (struct iw_priv_args *) prism54_private_args,
-#if WIRELESS_EXT > 16
.get_wireless_stats = prism54_get_wireless_stats,
-#endif /* WIRELESS_EXT > 16 */
-#if WIRELESS_EXT == 16
- .spy_offset = offsetof(islpci_private, spy_data),
-#endif /* WIRELESS_EXT == 16 */
};
/* For wpa_supplicant */
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 6f13d4a..78bdb35 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -439,8 +439,7 @@
wmb();
/* wait a while for the device to reset */
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(50*HZ/1000);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(50));
return 0;
}
@@ -491,8 +490,7 @@
/* The software reset acknowledge needs about 220 msec here.
* Be conservative and wait for up to one second. */
- set_current_state(TASK_UNINTERRUPTIBLE);
- remaining = schedule_timeout(HZ);
+ remaining = schedule_timeout_uninterruptible(HZ);
if(remaining > 0) {
result = 0;
@@ -756,8 +754,7 @@
pci_unmap_single(priv->pdev, buf->pci_addr,
buf->size, PCI_DMA_FROMDEVICE);
buf->pci_addr = 0;
- if (buf->mem)
- kfree(buf->mem);
+ kfree(buf->mem);
buf->size = 0;
buf->mem = NULL;
}
@@ -839,13 +836,9 @@
priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ?
priv->monitor_type : ARPHRD_ETHER;
-#if WIRELESS_EXT > 16
/* Add pointers to enable iwspy support. */
priv->wireless_data.spy_data = &priv->spy_data;
ndev->wireless_data = &priv->wireless_data;
-#else /* WIRELESS_EXT > 16 */
- ndev->get_wireless_stats = &prism54_get_wireless_stats;
-#endif /* WIRELESS_EXT > 16 */
/* save the start and end address of the PCI memory area */
ndev->mem_start = (unsigned long) priv->device_base;
diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h
index 32a1019..efbed43 100644
--- a/drivers/net/wireless/prism54/islpci_dev.h
+++ b/drivers/net/wireless/prism54/islpci_dev.h
@@ -100,9 +100,7 @@
struct iw_spy_data spy_data; /* iwspy support */
-#if WIRELESS_EXT > 16
struct iw_public_data wireless_data;
-#endif /* WIRELESS_EXT > 16 */
int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 5952e99..3b49efa 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -97,12 +97,6 @@
/* lock the driver code */
spin_lock_irqsave(&priv->slock, flags);
- /* determine the amount of fragments needed to store the frame */
-
- frame_size = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- if (init_wds)
- frame_size += 6;
-
/* check whether the destination queue has enough fragments for the frame */
curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
@@ -213,6 +207,7 @@
/* store the skb address for future freeing */
priv->data_low_tx[index] = skb;
/* set the proper fragment start address and size information */
+ frame_size = skb->len;
fragment->size = cpu_to_le16(frame_size);
fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
fragment->address = cpu_to_le32(pci_map_address);
@@ -246,12 +241,10 @@
return 0;
drop_free:
- /* free the skbuf structure before aborting */
- dev_kfree_skb(skb);
- skb = NULL;
-
priv->statistics.tx_dropped++;
spin_unlock_irqrestore(&priv->slock, flags);
+ dev_kfree_skb(skb);
+ skb = NULL;
return err;
}
diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c
index b6f2e5a..6a60c59 100644
--- a/drivers/net/wireless/prism54/islpci_mgt.c
+++ b/drivers/net/wireless/prism54/islpci_mgt.c
@@ -137,7 +137,7 @@
PCI_DMA_FROMDEVICE);
if (!buf->pci_addr) {
printk(KERN_WARNING
- "Failed to make memory DMA'able\n.");
+ "Failed to make memory DMA'able.\n");
return -ENOMEM;
}
}
@@ -455,7 +455,7 @@
struct islpci_mgmtframe **recvframe)
{
islpci_private *priv = netdev_priv(ndev);
- const long wait_cycle_jiffies = (ISL38XX_WAIT_CYCLE * 10 * HZ) / 1000;
+ const long wait_cycle_jiffies = msecs_to_jiffies(ISL38XX_WAIT_CYCLE * 10);
long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies;
int err;
DEFINE_WAIT(wait);
@@ -475,8 +475,7 @@
int timeleft;
struct islpci_mgmtframe *frame;
- set_current_state(TASK_UNINTERRUPTIBLE);
- timeleft = schedule_timeout(wait_cycle_jiffies);
+ timeleft = schedule_timeout_uninterruptible(wait_cycle_jiffies);
frame = xchg(&priv->mgmt_received, NULL);
if (frame) {
if (frame->header->oid == oid) {
diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c
index 12123e2..eea2f04 100644
--- a/drivers/net/wireless/prism54/oid_mgt.c
+++ b/drivers/net/wireless/prism54/oid_mgt.c
@@ -268,11 +268,10 @@
if (!priv->mib)
return;
- for (i = 0; i < OID_NUM_LAST; i++)
- if (priv->mib[i]) {
- kfree(priv->mib[i]);
- priv->mib[i] = NULL;
- }
+ for (i = 0; i < OID_NUM_LAST; i++) {
+ kfree(priv->mib[i]);
+ priv->mib[i] = NULL;
+ }
kfree(priv->mib);
priv->mib = NULL;
}
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index e9c5ea0..70fd6fd 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -1649,28 +1649,28 @@
*/
static const iw_handler ray_handler[] = {
- [SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) ray_commit,
- [SIOCGIWNAME -SIOCIWFIRST] (iw_handler) ray_get_name,
- [SIOCSIWFREQ -SIOCIWFIRST] (iw_handler) ray_set_freq,
- [SIOCGIWFREQ -SIOCIWFIRST] (iw_handler) ray_get_freq,
- [SIOCSIWMODE -SIOCIWFIRST] (iw_handler) ray_set_mode,
- [SIOCGIWMODE -SIOCIWFIRST] (iw_handler) ray_get_mode,
- [SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) ray_get_range,
+ [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) ray_commit,
+ [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) ray_get_name,
+ [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) ray_set_freq,
+ [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) ray_get_freq,
+ [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) ray_set_mode,
+ [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) ray_get_mode,
+ [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) ray_get_range,
#ifdef WIRELESS_SPY
- [SIOCSIWSPY -SIOCIWFIRST] (iw_handler) iw_handler_set_spy,
- [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) iw_handler_get_spy,
- [SIOCSIWTHRSPY-SIOCIWFIRST] (iw_handler) iw_handler_set_thrspy,
- [SIOCGIWTHRSPY-SIOCIWFIRST] (iw_handler) iw_handler_get_thrspy,
+ [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy,
+ [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy,
+ [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy,
+ [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy,
#endif /* WIRELESS_SPY */
- [SIOCGIWAP -SIOCIWFIRST] (iw_handler) ray_get_wap,
- [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) ray_set_essid,
- [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) ray_get_essid,
- [SIOCSIWRATE -SIOCIWFIRST] (iw_handler) ray_set_rate,
- [SIOCGIWRATE -SIOCIWFIRST] (iw_handler) ray_get_rate,
- [SIOCSIWRTS -SIOCIWFIRST] (iw_handler) ray_set_rts,
- [SIOCGIWRTS -SIOCIWFIRST] (iw_handler) ray_get_rts,
- [SIOCSIWFRAG -SIOCIWFIRST] (iw_handler) ray_set_frag,
- [SIOCGIWFRAG -SIOCIWFIRST] (iw_handler) ray_get_frag,
+ [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) ray_get_wap,
+ [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) ray_set_essid,
+ [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) ray_get_essid,
+ [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) ray_set_rate,
+ [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) ray_get_rate,
+ [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) ray_set_rts,
+ [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) ray_get_rts,
+ [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) ray_set_frag,
+ [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) ray_get_frag,
};
#define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */
@@ -1678,9 +1678,9 @@
#define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */
static const iw_handler ray_private_handler[] = {
- [0] (iw_handler) ray_set_framing,
- [1] (iw_handler) ray_get_framing,
- [3] (iw_handler) ray_get_country,
+ [0] = (iw_handler) ray_set_framing,
+ [1] = (iw_handler) ray_get_framing,
+ [3] = (iw_handler) ray_get_country,
};
static const struct iw_priv_args ray_private_args[] = {
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 39c6cdf..b1bbc8e 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -22,58 +22,23 @@
#define PFX DRIVER_NAME ": "
#include <linux/config.h>
-#ifdef __IN_PCMCIA_PACKAGE__
-#include <pcmcia/k_compat.h>
-#endif /* __IN_PCMCIA_PACKAGE__ */
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/wireless.h>
-
+#include <linux/delay.h>
+#include <linux/firmware.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
#include "orinoco.h"
-/*
- * If SPECTRUM_FW_INCLUDED is defined, the firmware is hardcoded into
- * the driver. Use get_symbol_fw script to generate spectrum_fw.h and
- * copy it to the same directory as spectrum_cs.c.
- *
- * If SPECTRUM_FW_INCLUDED is not defined, the firmware is loaded at the
- * runtime using hotplug. Use the same get_symbol_fw script to generate
- * files symbol_sp24t_prim_fw symbol_sp24t_sec_fw, copy them to the
- * hotplug firmware directory (typically /usr/lib/hotplug/firmware) and
- * make sure that you have hotplug installed and enabled in the kernel.
- */
-/* #define SPECTRUM_FW_INCLUDED 1 */
-
-#ifdef SPECTRUM_FW_INCLUDED
-/* Header with the firmware */
-#include "spectrum_fw.h"
-#else /* !SPECTRUM_FW_INCLUDED */
-#include <linux/firmware.h>
static unsigned char *primsym;
static unsigned char *secsym;
static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
-#endif /* !SPECTRUM_FW_INCLUDED */
/********************************************************************/
/* Module stuff */
@@ -124,17 +89,8 @@
/* Function prototypes */
/********************************************************************/
-/* device methods */
-static int spectrum_cs_hard_reset(struct orinoco_private *priv);
-
-/* PCMCIA gumpf */
-static void spectrum_cs_config(dev_link_t * link);
-static void spectrum_cs_release(dev_link_t * link);
-static int spectrum_cs_event(event_t event, int priority,
- event_callback_args_t * args);
-
-static dev_link_t *spectrum_cs_attach(void);
-static void spectrum_cs_detach(dev_link_t *);
+static void spectrum_cs_release(dev_link_t *link);
+static void spectrum_cs_detach(dev_link_t *link);
/********************************************************************/
/* Firmware downloader */
@@ -182,8 +138,8 @@
* Each block has the following structure.
*/
struct dblock {
- u32 _addr; /* adapter address where to write the block */
- u16 _len; /* length of the data only, in bytes */
+ __le32 _addr; /* adapter address where to write the block */
+ __le16 _len; /* length of the data only, in bytes */
char data[0]; /* data to be written */
} __attribute__ ((packed));
@@ -193,9 +149,9 @@
* items with matching ID should be written.
*/
struct pdr {
- u32 _id; /* record ID */
- u32 _addr; /* adapter address where to write the data */
- u32 _len; /* expected length of the data, in bytes */
+ __le32 _id; /* record ID */
+ __le32 _addr; /* adapter address where to write the data */
+ __le32 _len; /* expected length of the data, in bytes */
char next[0]; /* next PDR starts here */
} __attribute__ ((packed));
@@ -206,8 +162,8 @@
* be plugged into the secondary firmware.
*/
struct pdi {
- u16 _len; /* length of ID and data, in words */
- u16 _id; /* record ID */
+ __le16 _len; /* length of ID and data, in words */
+ __le16 _id; /* record ID */
char data[0]; /* plug data */
} __attribute__ ((packed));;
@@ -414,7 +370,7 @@
/* Read PDA from the adapter */
static int
-spectrum_read_pda(hermes_t *hw, u16 *pda, int pda_len)
+spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len)
{
int ret;
int pda_size;
@@ -445,7 +401,7 @@
/* Parse PDA and write the records into the adapter */
static int
spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block,
- u16 *pda)
+ __le16 *pda)
{
int ret;
struct pdi *pdi;
@@ -511,7 +467,7 @@
const struct dblock *first_block;
/* Plug Data Area (PDA) */
- u16 pda[PDA_WORDS];
+ __le16 pda[PDA_WORDS];
/* Binary block begins after the 0x1A marker */
ptr = image;
@@ -571,8 +527,6 @@
{
int ret;
client_handle_t handle = link->handle;
-
-#ifndef SPECTRUM_FW_INCLUDED
const struct firmware *fw_entry;
if (request_firmware(&fw_entry, primary_fw_name,
@@ -592,7 +546,6 @@
secondary_fw_name);
return -ENOENT;
}
-#endif
/* Load primary firmware */
ret = spectrum_dl_image(hw, link, primsym);
@@ -1085,7 +1038,7 @@
static struct pcmcia_device_id spectrum_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4100 */
PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
- PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0001), /* Intel PRO/Wireless 2011B */
+ PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);
@@ -1096,8 +1049,8 @@
.name = DRIVER_NAME,
},
.attach = spectrum_cs_attach,
- .event = spectrum_cs_event,
.detach = spectrum_cs_detach,
+ .event = spectrum_cs_event,
.id_table = spectrum_cs_ids,
};
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 7bc7fc8..d25264b 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -860,12 +860,9 @@
strip_info->mtu = dev->mtu = mtu;
return (1);
}
- if (r)
- kfree(r);
- if (s)
- kfree(s);
- if (t)
- kfree(t);
+ kfree(r);
+ kfree(s);
+ kfree(t);
return (0);
}
@@ -922,13 +919,9 @@
printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
strip_info->dev->name, old_mtu, strip_info->mtu);
- if (orbuff)
- kfree(orbuff);
- if (osbuff)
- kfree(osbuff);
- if (otbuff)
- kfree(otbuff);
-
+ kfree(orbuff);
+ kfree(osbuff);
+ kfree(otbuff);
return 0;
}
@@ -2498,18 +2491,13 @@
/*
* Free all STRIP frame buffers.
*/
- if (strip_info->rx_buff) {
- kfree(strip_info->rx_buff);
- strip_info->rx_buff = NULL;
- }
- if (strip_info->sx_buff) {
- kfree(strip_info->sx_buff);
- strip_info->sx_buff = NULL;
- }
- if (strip_info->tx_buff) {
- kfree(strip_info->tx_buff);
- strip_info->tx_buff = NULL;
- }
+ kfree(strip_info->rx_buff);
+ strip_info->rx_buff = NULL;
+ kfree(strip_info->sx_buff);
+ strip_info->sx_buff = NULL;
+ kfree(strip_info->tx_buff);
+ strip_info->tx_buff = NULL;
+
del_timer(&strip_info->idle_timer);
return 0;
}
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index 7a5e20a..b0d8b5b 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -430,7 +430,6 @@
}
}
-#ifdef WIRELESS_EXT /* if the wireless extension exists in the kernel */
/*------------------------------------------------------------------*/
/*
@@ -514,7 +513,6 @@
fee_wait(ioaddr, 10, 100);
#endif /* EEPROM_IS_PROTECTED */
}
-#endif /* WIRELESS_EXT */
/************************ I82586 SUBROUTINES *************************/
/*
@@ -973,11 +971,9 @@
mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m));
mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
-#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */
/* Don't forget to update statistics */
lp->wstats.discard.nwid +=
(m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-#endif /* WIRELESS_EXT */
printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n");
#ifdef DEBUG_SHOW_UNUSED
@@ -1499,7 +1495,6 @@
}
#endif /* SET_MAC_ADDRESS */
-#ifdef WIRELESS_EXT /* if wireless extensions exist in the kernel */
/*------------------------------------------------------------------*/
/*
@@ -2473,7 +2468,6 @@
#endif
return &lp->wstats;
}
-#endif /* WIRELESS_EXT */
/************************* PACKET RECEPTION *************************/
/*
@@ -4194,11 +4188,9 @@
dev->set_mac_address = &wavelan_set_mac_address;
#endif /* SET_MAC_ADDRESS */
-#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */
dev->wireless_handlers = &wavelan_handler_def;
lp->wireless_data.spy_data = &lp->spy_data;
dev->wireless_data = &lp->wireless_data;
-#endif
dev->mtu = WAVELAN_MTU;
diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h
index 509ff22..166e28b 100644
--- a/drivers/net/wireless/wavelan.p.h
+++ b/drivers/net/wireless/wavelan.p.h
@@ -409,11 +409,9 @@
#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical). */
#undef SET_MAC_ADDRESS /* Experimental */
-#ifdef WIRELESS_EXT /* If wireless extensions exist in the kernel */
/* Warning: this stuff will slow down the driver. */
#define WIRELESS_SPY /* Enable spying addresses. */
#undef HISTOGRAM /* Enable histogram of signal level. */
-#endif
/****************************** DEBUG ******************************/
@@ -506,12 +504,10 @@
u_short tx_first_free;
u_short tx_first_in_use;
-#ifdef WIRELESS_EXT
iw_stats wstats; /* Wireless-specific statistics */
struct iw_spy_data spy_data;
struct iw_public_data wireless_data;
-#endif
#ifdef HISTOGRAM
int his_number; /* number of intervals */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 183c473..4b3c98f 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -415,7 +415,6 @@
}
}
-#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
/*------------------------------------------------------------------*/
/*
@@ -500,7 +499,6 @@
fee_wait(base, 10, 100);
#endif /* EEPROM_IS_PROTECTED */
}
-#endif /* WIRELESS_EXT */
/******************* WaveLAN Roaming routines... ********************/
@@ -1161,10 +1159,8 @@
mmc_read(base, 0, (u_char *)&m, sizeof(m));
mmc_out(base, mmwoff(0, mmw_freeze), 0);
-#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
/* Don't forget to update statistics */
lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-#endif /* WIRELESS_EXT */
spin_unlock_irqrestore(&lp->spinlock, flags);
@@ -1550,7 +1546,6 @@
}
#endif /* SET_MAC_ADDRESS */
-#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
/*------------------------------------------------------------------*/
/*
@@ -2793,7 +2788,6 @@
#endif
return &lp->wstats;
}
-#endif /* WIRELESS_EXT */
/************************* PACKET RECEPTION *************************/
/*
@@ -4679,11 +4673,9 @@
dev->watchdog_timeo = WATCHDOG_JIFFIES;
SET_ETHTOOL_OPS(dev, &ops);
-#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
dev->wireless_handlers = &wavelan_handler_def;
lp->wireless_data.spy_data = &lp->spy_data;
dev->wireless_data = &lp->wireless_data;
-#endif
/* Other specific data */
dev->mtu = WAVELAN_MTU;
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index 01d882b..724a715 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -472,11 +472,9 @@
#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */
#undef SET_MAC_ADDRESS /* Experimental */
-#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
/* Warning : these stuff will slow down the driver... */
#define WIRELESS_SPY /* Enable spying addresses */
#undef HISTOGRAM /* Enable histogram of sig level... */
-#endif
/****************************** DEBUG ******************************/
@@ -624,12 +622,10 @@
int rfp; /* Last DMA machine receive pointer */
int overrunning; /* Receiver overrun flag */
-#ifdef WIRELESS_EXT
iw_stats wstats; /* Wireless specific stats */
struct iw_spy_data spy_data;
struct iw_public_data wireless_data;
-#endif
#ifdef HISTOGRAM
int his_number; /* Number of intervals */
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index 7fcbe58..4303c50 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -548,7 +548,7 @@
struct wl3501_80211_tx_hdr {
struct wl3501_80211_tx_plcp_hdr pclp_hdr;
- struct ieee80211_hdr mac_hdr;
+ struct ieee80211_hdr_4addr mac_hdr;
} __attribute__ ((packed));
/*
diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c
index 3886099..558420b 100644
--- a/drivers/parisc/asp.c
+++ b/drivers/parisc/asp.c
@@ -77,12 +77,12 @@
struct gsc_irq gsc_irq;
int ret;
- asp.version = gsc_readb(dev->hpa + ASP_VER_OFFSET) & 0xf;
+ asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf;
asp.name = (asp.version == 1) ? "Asp" : "Cutoff";
asp.hpa = ASP_INTERRUPT_ADDR;
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
- asp.name, asp.version, dev->hpa);
+ asp.name, asp.version, dev->hpa.start);
/* the IRQ ASP should use */
ret = -EBUSY;
@@ -126,7 +126,7 @@
};
struct parisc_driver asp_driver = {
- .name = "Asp",
+ .name = "asp",
.id_table = asp_tbl,
.probe = asp_init_chip,
};
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 0e98a9d..9e0229f 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -100,9 +100,9 @@
#define DBG_RUN_SG(x...)
#endif
-#define CCIO_INLINE /* inline */
-#define WRITE_U32(value, addr) gsc_writel(value, (u32 *)(addr))
-#define READ_U32(addr) gsc_readl((u32 *)(addr))
+#define CCIO_INLINE inline
+#define WRITE_U32(value, addr) __raw_writel(value, addr)
+#define READ_U32(addr) __raw_readl(addr)
#define U2_IOA_RUNWAY 0x580
#define U2_BC_GSC 0x501
@@ -115,28 +115,28 @@
struct ioa_registers {
/* Runway Supervisory Set */
- volatile int32_t unused1[12];
- volatile uint32_t io_command; /* Offset 12 */
- volatile uint32_t io_status; /* Offset 13 */
- volatile uint32_t io_control; /* Offset 14 */
- volatile int32_t unused2[1];
+ int32_t unused1[12];
+ uint32_t io_command; /* Offset 12 */
+ uint32_t io_status; /* Offset 13 */
+ uint32_t io_control; /* Offset 14 */
+ int32_t unused2[1];
/* Runway Auxiliary Register Set */
- volatile uint32_t io_err_resp; /* Offset 0 */
- volatile uint32_t io_err_info; /* Offset 1 */
- volatile uint32_t io_err_req; /* Offset 2 */
- volatile uint32_t io_err_resp_hi; /* Offset 3 */
- volatile uint32_t io_tlb_entry_m; /* Offset 4 */
- volatile uint32_t io_tlb_entry_l; /* Offset 5 */
- volatile uint32_t unused3[1];
- volatile uint32_t io_pdir_base; /* Offset 7 */
- volatile uint32_t io_io_low_hv; /* Offset 8 */
- volatile uint32_t io_io_high_hv; /* Offset 9 */
- volatile uint32_t unused4[1];
- volatile uint32_t io_chain_id_mask; /* Offset 11 */
- volatile uint32_t unused5[2];
- volatile uint32_t io_io_low; /* Offset 14 */
- volatile uint32_t io_io_high; /* Offset 15 */
+ uint32_t io_err_resp; /* Offset 0 */
+ uint32_t io_err_info; /* Offset 1 */
+ uint32_t io_err_req; /* Offset 2 */
+ uint32_t io_err_resp_hi; /* Offset 3 */
+ uint32_t io_tlb_entry_m; /* Offset 4 */
+ uint32_t io_tlb_entry_l; /* Offset 5 */
+ uint32_t unused3[1];
+ uint32_t io_pdir_base; /* Offset 7 */
+ uint32_t io_io_low_hv; /* Offset 8 */
+ uint32_t io_io_high_hv; /* Offset 9 */
+ uint32_t unused4[1];
+ uint32_t io_chain_id_mask; /* Offset 11 */
+ uint32_t unused5[2];
+ uint32_t io_io_low; /* Offset 14 */
+ uint32_t io_io_high; /* Offset 15 */
};
/*
@@ -226,7 +226,7 @@
*/
struct ioc {
- struct ioa_registers *ioc_hpa; /* I/O MMU base address */
+ struct ioa_registers __iomem *ioc_regs; /* I/O MMU base address */
u8 *res_map; /* resource map, bit == pdir entry */
u64 *pdir_base; /* physical base address */
u32 pdir_size; /* bytes, function of IOV Space size */
@@ -595,7 +595,7 @@
** Grab virtual index [0:11]
** Deposit virt_idx bits into I/O PDIR word
*/
- asm volatile ("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
+ asm volatile ("lci %%r0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
asm volatile ("extru %1,19,12,%0" : "+r" (ci) : "r" (ci));
asm volatile ("depw %1,15,12,%0" : "+r" (pa) : "r" (ci));
@@ -613,7 +613,7 @@
** the real mode coherence index generation of U2, the PDIR entry
** must be flushed to memory to retain coherence."
*/
- asm volatile("fdc 0(%0)" : : "r" (pdir_ptr));
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
asm volatile("sync");
}
@@ -636,7 +636,7 @@
byte_cnt += chain_size;
while(byte_cnt > chain_size) {
- WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_hpa->io_command);
+ WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_regs->io_command);
iovp += chain_size;
byte_cnt -= chain_size;
}
@@ -684,7 +684,7 @@
** Hopefully someone figures out how to patch (NOP) the
** FDC/SYNC out at boot time.
*/
- asm volatile("fdc 0(%0)" : : "r" (pdir_ptr[7]));
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr[7]));
iovp += IOVP_SIZE;
byte_cnt -= IOVP_SIZE;
@@ -836,7 +836,7 @@
* This function implements the pci_alloc_consistent function.
*/
static void *
-ccio_alloc_consistent(struct device *dev, size_t size, dma_addr_t *dma_handle, int flag)
+ccio_alloc_consistent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag)
{
void *ret;
#if 0
@@ -1251,7 +1251,7 @@
static int ccio_probe(struct parisc_device *dev);
static struct parisc_driver ccio_driver = {
- .name = "U2:Uturn",
+ .name = "ccio",
.id_table = ccio_tbl,
.probe = ccio_probe,
};
@@ -1314,14 +1314,13 @@
ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
- BUG_ON(ioc->pdir_size >= 4 * 1024 * 1024); /* max pdir size < 4MB */
+ BUG_ON(ioc->pdir_size > 8 * 1024 * 1024); /* max pdir size <= 8MB */
/* Verify it's a power of two */
BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT));
- DBG_INIT("%s() hpa 0x%lx mem %luMB IOV %dMB (%d bits)\n",
- __FUNCTION__,
- ioc->ioc_hpa,
+ DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits)\n",
+ __FUNCTION__, ioc->ioc_regs,
(unsigned long) num_physpages >> (20 - PAGE_SHIFT),
iova_space_size>>20,
iov_order + PAGE_SHIFT);
@@ -1329,13 +1328,12 @@
ioc->pdir_base = (u64 *)__get_free_pages(GFP_KERNEL,
get_order(ioc->pdir_size));
if(NULL == ioc->pdir_base) {
- panic("%s:%s() could not allocate I/O Page Table\n", __FILE__,
- __FUNCTION__);
+ panic("%s() could not allocate I/O Page Table\n", __FUNCTION__);
}
memset(ioc->pdir_base, 0, ioc->pdir_size);
BUG_ON((((unsigned long)ioc->pdir_base) & PAGE_MASK) != (unsigned long)ioc->pdir_base);
- DBG_INIT(" base %p", ioc->pdir_base);
+ DBG_INIT(" base %p\n", ioc->pdir_base);
/* resource map size dictated by pdir_size */
ioc->res_size = (ioc->pdir_size / sizeof(u64)) >> 3;
@@ -1344,8 +1342,7 @@
ioc->res_map = (u8 *)__get_free_pages(GFP_KERNEL,
get_order(ioc->res_size));
if(NULL == ioc->res_map) {
- panic("%s:%s() could not allocate resource map\n", __FILE__,
- __FUNCTION__);
+ panic("%s() could not allocate resource map\n", __FUNCTION__);
}
memset(ioc->res_map, 0, ioc->res_size);
@@ -1366,44 +1363,58 @@
** Initialize IOA hardware
*/
WRITE_U32(CCIO_CHAINID_MASK << ioc->chainid_shift,
- &ioc->ioc_hpa->io_chain_id_mask);
+ &ioc->ioc_regs->io_chain_id_mask);
WRITE_U32(virt_to_phys(ioc->pdir_base),
- &ioc->ioc_hpa->io_pdir_base);
+ &ioc->ioc_regs->io_pdir_base);
/*
** Go to "Virtual Mode"
*/
- WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_hpa->io_control);
+ WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_regs->io_control);
/*
** Initialize all I/O TLB entries to 0 (Valid bit off).
*/
- WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_m);
- WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_l);
+ WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_m);
+ WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_l);
for(i = 1 << CCIO_CHAINID_SHIFT; i ; i--) {
WRITE_U32((CMD_TLB_DIRECT_WRITE | (i << ioc->chainid_shift)),
- &ioc->ioc_hpa->io_command);
+ &ioc->ioc_regs->io_command);
}
}
static void
-ccio_init_resource(struct resource *res, char *name, unsigned long ioaddr)
+ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr)
{
int result;
res->parent = NULL;
res->flags = IORESOURCE_MEM;
- res->start = (unsigned long)(signed) __raw_readl(ioaddr) << 16;
- res->end = (unsigned long)(signed) (__raw_readl(ioaddr + 4) << 16) - 1;
+ /*
+ * bracing ((signed) ...) are required for 64bit kernel because
+ * we only want to sign extend the lower 16 bits of the register.
+ * The upper 16-bits of range registers are hardcoded to 0xffff.
+ */
+ res->start = (unsigned long)((signed) READ_U32(ioaddr) << 16);
+ res->end = (unsigned long)((signed) (READ_U32(ioaddr + 4) << 16) - 1);
res->name = name;
+ /*
+ * Check if this MMIO range is disable
+ */
if (res->end + 1 == res->start)
return;
- result = request_resource(&iomem_resource, res);
+
+ /* On some platforms (e.g. K-Class), we have already registered
+ * resources for devices reported by firmware. Some are children
+ * of ccio.
+ * "insert" ccio ranges in the mmio hierarchy (/proc/iomem).
+ */
+ result = insert_resource(&iomem_resource, res);
if (result < 0) {
- printk(KERN_ERR "%s: failed to claim CCIO bus address space (%08lx,%08lx)\n",
- __FILE__, res->start, res->end);
+ printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n",
+ __FUNCTION__, res->start, res->end);
}
}
@@ -1414,9 +1425,8 @@
sprintf(name, "GSC Bus [%d/]", ioc->hw_path);
- ccio_init_resource(res, name, (unsigned long)&ioc->ioc_hpa->io_io_low);
- ccio_init_resource(res + 1, name,
- (unsigned long)&ioc->ioc_hpa->io_io_low_hv);
+ ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low);
+ ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv);
}
static int new_ioc_area(struct resource *res, unsigned long size,
@@ -1427,7 +1437,12 @@
res->start = (max - size + 1) &~ (align - 1);
res->end = res->start + size;
- if (!request_resource(&iomem_resource, res))
+
+ /* We might be trying to expand the MMIO range to include
+ * a child device that has already registered it's MMIO space.
+ * Use "insert" instead of request_resource().
+ */
+ if (!insert_resource(&iomem_resource, res))
return 0;
return new_ioc_area(res, size, min, max - size, align);
@@ -1486,15 +1501,15 @@
if (!expand_ioc_area(parent, size, min, max, align)) {
__raw_writel(((parent->start)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_low));
+ &ioc->ioc_regs->io_io_low);
__raw_writel(((parent->end)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_high));
+ &ioc->ioc_regs->io_io_high);
} else if (!expand_ioc_area(parent + 1, size, min, max, align)) {
parent++;
__raw_writel(((parent->start)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_low_hv));
+ &ioc->ioc_regs->io_io_low_hv);
__raw_writel(((parent->end)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_high_hv));
+ &ioc->ioc_regs->io_io_high_hv);
} else {
return -EBUSY;
}
@@ -1521,7 +1536,12 @@
return -EBUSY;
}
- return request_resource(parent, res);
+ /* "transparent" bus bridges need to register MMIO resources
+ * firmware assigned them. e.g. children of hppb.c (e.g. K-class)
+ * registered their resources in the PDC "bus walk" (See
+ * arch/parisc/kernel/inventory.c).
+ */
+ return insert_resource(parent, res);
}
/**
@@ -1546,7 +1566,7 @@
ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn";
- printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa);
+ printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa.start);
for (i = 0; i < ioc_count; i++) {
ioc_p = &(*ioc_p)->next;
@@ -1554,7 +1574,7 @@
*ioc_p = ioc;
ioc->hw_path = dev->hw_path;
- ioc->ioc_hpa = (struct ioa_registers *)dev->hpa;
+ ioc->ioc_regs = ioremap(dev->hpa.start, 4096);
ccio_ioc_init(ioc);
ccio_init_resources(ioc);
hppa_dma_ops = &ccio_ops;
diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c
index 57e6385..356b835 100644
--- a/drivers/parisc/ccio-rm-dma.c
+++ b/drivers/parisc/ccio-rm-dma.c
@@ -167,7 +167,7 @@
{
printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME,
dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn",
- dev->hpa);
+ dev->hpa.start);
/*
** FIXME - should check U2 registers to verify it's really running
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 2f2dbef..5ab7533 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -178,6 +178,8 @@
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
+ DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+ size);
spin_lock_irqsave(&d->dinosaur_pen, flags);
/* tell HW which CFG address */
@@ -211,6 +213,8 @@
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
+ DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+ size);
spin_lock_irqsave(&d->dinosaur_pen, flags);
/* avoid address stepping feature */
@@ -295,7 +299,7 @@
struct dino_device *dino_dev = irq_desc[irq].handler_data;
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq);
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq);
+ DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
/* Clear the matching bit in the IMR register */
dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
@@ -308,7 +312,7 @@
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq);
u32 tmp;
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq);
+ DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
/*
** clear pending IRQ bits
@@ -490,7 +494,7 @@
if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB)))
break;
}
- DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %lx\n",
+ DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %p\n",
i, res->start, base_addr + DINO_IO_ADDR_EN);
__raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN);
}
@@ -683,6 +687,14 @@
dino_card_init(struct dino_device *dino_dev)
{
u32 brdg_feat = 0x00784e05;
+ unsigned long status;
+
+ status = __raw_readl(dino_dev->hba.base_addr+DINO_IO_STATUS);
+ if (status & 0x0000ff80) {
+ __raw_writel(0x00000005,
+ dino_dev->hba.base_addr+DINO_IO_COMMAND);
+ udelay(1);
+ }
__raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK);
__raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN);
@@ -902,15 +914,15 @@
** If so, initialize the chip appropriately (card-mode vs bridge mode).
** Much of the initialization is common though.
*/
-static int __init
-dino_driver_callback(struct parisc_device *dev)
+static int __init dino_probe(struct parisc_device *dev)
{
struct dino_device *dino_dev; // Dino specific control struct
const char *version = "unknown";
char *name;
int is_cujo = 0;
struct pci_bus *bus;
-
+ unsigned long hpa = dev->hpa.start;
+
name = "Dino";
if (is_card_dino(&dev->id)) {
version = "3.x (card mode)";
@@ -928,11 +940,11 @@
}
}
- printk("%s version %s found at 0x%lx\n", name, version, dev->hpa);
+ printk("%s version %s found at 0x%lx\n", name, version, hpa);
- if (!request_mem_region(dev->hpa, PAGE_SIZE, name)) {
+ if (!request_mem_region(hpa, PAGE_SIZE, name)) {
printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n",
- dev->hpa);
+ hpa);
return 1;
}
@@ -940,12 +952,12 @@
if (is_cujo && dev->id.hversion_rev == 1) {
#ifdef CONFIG_IOMMU_CCIO
printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n");
- if (dev->hpa == (unsigned long)CUJO_RAVEN_ADDR) {
+ if (hpa == (unsigned long)CUJO_RAVEN_ADDR) {
ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE);
- } else if (dev->hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
+ } else if (hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE);
} else {
- printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", dev->hpa);
+ printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa);
}
#endif
} else if (!is_cujo && !is_card_dino(&dev->id) &&
@@ -970,7 +982,7 @@
memset(dino_dev, 0, sizeof(struct dino_device));
dino_dev->hba.dev = dev;
- dino_dev->hba.base_addr = ioremap(dev->hpa, 4096); /* faster access */
+ dino_dev->hba.base_addr = ioremap(hpa, 4096);
dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */
spin_lock_init(&dino_dev->dinosaur_pen);
dino_dev->hba.iommu = ccio_get_iommu(dev);
@@ -1027,9 +1039,9 @@
};
static struct parisc_driver dino_driver = {
- .name = "Dino",
+ .name = "dino",
.id_table = dino_tbl,
- .probe = dino_driver_callback,
+ .probe = dino_probe,
};
/*
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 043d47a..6362bf9 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -315,7 +315,7 @@
char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
- name, dev->hpa);
+ name, dev->hpa.start);
eisa_dev.hba.dev = dev;
eisa_dev.hba.iommu = ccio_get_iommu(dev);
@@ -397,7 +397,7 @@
MODULE_DEVICE_TABLE(parisc, eisa_tbl);
static struct parisc_driver eisa_driver = {
- .name = "EISA Bus Adapter",
+ .name = "eisa_ba",
.id_table = eisa_tbl,
.probe = eisa_probe,
};
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index af5e025..16d40f9 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -183,12 +183,20 @@
*irqp = irq;
}
+static struct device *next_device(struct klist_iter *i)
+{
+ struct klist_node * n = klist_next(i);
+ return n ? container_of(n, struct device, knode_parent) : NULL;
+}
+
void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
void (*choose_irq)(struct parisc_device *, void *))
{
struct device *dev;
+ struct klist_iter i;
- list_for_each_entry(dev, &parent->dev.children, node) {
+ klist_iter_init(&parent->dev.klist_children, &i);
+ while ((dev = next_device(&i))) {
struct parisc_device *padev = to_parisc_device(dev);
/* work-around for 715/64 and others which have parent
@@ -197,6 +205,7 @@
return gsc_fixup_irqs(padev, ctrl, choose_irq);
choose_irq(padev, ctrl);
}
+ klist_iter_exit(&i);
}
int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic)
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index e869c60..5edf93f 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -68,14 +68,14 @@
memset(card->next, '\0', sizeof(struct hppb_card));
card = card->next;
}
- printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa);
+ printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start);
- card->hpa = dev->hpa;
+ card->hpa = dev->hpa.start;
card->mmio_region.name = "HP-PB Bus";
card->mmio_region.flags = IORESOURCE_MEM;
- card->mmio_region.start = __raw_readl(dev->hpa + IO_IO_LOW);
- card->mmio_region.end = __raw_readl(dev->hpa + IO_IO_HIGH) - 1;
+ card->mmio_region.start = gsc_readl(dev->hpa.start + IO_IO_LOW);
+ card->mmio_region.end = gsc_readl(dev->hpa.start + IO_IO_HIGH) - 1;
status = ccio_request_resource(dev, &card->mmio_region);
if(status < 0) {
@@ -93,7 +93,7 @@
};
static struct parisc_driver hppb_driver = {
- .name = "Gecko Boa",
+ .name = "gecko_boa",
.id_table = hppb_tbl,
.probe = hppb_probe,
};
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 7a57c1b..a39fbfe 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -244,7 +244,7 @@
* 4-byte alignment on 32-bit kernels
*/
a = (unsigned long)kmalloc(sizeof(struct irt_entry) * num_entries + 8, GFP_KERNEL);
- a = (a + 7) & ~7;
+ a = (a + 7UL) & ~7UL;
return (struct irt_entry *)a;
}
diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c
index cb84a4e..a8c2039 100644
--- a/drivers/parisc/lasi.c
+++ b/drivers/parisc/lasi.c
@@ -175,7 +175,7 @@
return -ENOMEM;
lasi->name = "Lasi";
- lasi->hpa = dev->hpa;
+ lasi->hpa = dev->hpa.start;
/* Check the 4-bit (yes, only 4) version register */
lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf;
@@ -233,7 +233,7 @@
};
struct parisc_driver lasi_driver = {
- .name = "Lasi",
+ .name = "lasi",
.id_table = lasi_tbl,
.probe = lasi_init_chip,
};
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 7fdd80b..5e495dc 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1288,7 +1288,7 @@
** Adjust "window" for this rope.
*/
rsize /= ROPES_PER_IOC;
- r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa);
+ r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start);
r->end = r->start + rsize;
} else {
r->end = r->start = 0; /* Not enabled. */
@@ -1458,7 +1458,7 @@
u32 func_class;
void *tmp_obj;
char *version;
- void __iomem *addr = ioremap(dev->hpa, 4096);
+ void __iomem *addr = ioremap(dev->hpa.start, 4096);
/* Read HW Rev First */
func_class = READ_REG32(addr + LBA_FCLASS);
@@ -1476,7 +1476,7 @@
}
printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
- MODULE_NAME, version, func_class & 0xf, dev->hpa);
+ MODULE_NAME, version, func_class & 0xf, dev->hpa.start);
if (func_class < 2) {
printk(KERN_WARNING "Can't support LBA older than "
@@ -1503,17 +1503,17 @@
* but for the mask for func_class.
*/
printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
- MODULE_NAME, version, func_class & 0xff, dev->hpa);
+ MODULE_NAME, version, func_class & 0xff, dev->hpa.start);
cfg_ops = &mercury_cfg_ops;
} else {
- printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa);
+ printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa.start);
return -ENODEV;
}
/*
** Tell I/O SAPIC driver we have a IRQ handler/region.
*/
- tmp_obj = iosapic_register(dev->hpa + LBA_IOSAPIC_BASE);
+ tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE);
/* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't
** have an IRT entry will get NULL back from iosapic code.
@@ -1635,7 +1635,7 @@
*/
void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
{
- void __iomem * base_addr = ioremap(lba->hpa, 4096);
+ void __iomem * base_addr = ioremap(lba->hpa.start, 4096);
imask <<= 2; /* adjust for hints - 2 more bits */
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 2869022..95bd07b 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -18,6 +18,9 @@
* Changes:
* - Audit copy_from_user in led_proc_write.
* Daniele Bellucci <bellucda@tiscali.it>
+ * - Switch from using a tasklet to a work queue, so the led_LCD_driver
+ * can sleep.
+ * David Pye <dmp@davidmpye.dyndns.org>
*/
#include <linux/config.h>
@@ -37,6 +40,7 @@
#include <linux/proc_fs.h>
#include <linux/ctype.h>
#include <linux/blkdev.h>
+#include <linux/workqueue.h>
#include <linux/rcupdate.h>
#include <asm/io.h>
#include <asm/processor.h>
@@ -47,25 +51,30 @@
#include <asm/uaccess.h>
/* The control of the LEDs and LCDs on PARISC-machines have to be done
- completely in software. The necessary calculations are done in a tasklet
- which is scheduled at every timer interrupt and since the calculations
- may consume relatively much CPU-time some of the calculations can be
+ completely in software. The necessary calculations are done in a work queue
+ task which is scheduled regularly, and since the calculations may consume a
+ relatively large amount of CPU time, some of the calculations can be
turned off with the following variables (controlled via procfs) */
static int led_type = -1;
-static int led_heartbeat = 1;
-static int led_diskio = 1;
-static int led_lanrxtx = 1;
+static unsigned char lastleds; /* LED state from most recent update */
+static unsigned int led_heartbeat = 1;
+static unsigned int led_diskio = 1;
+static unsigned int led_lanrxtx = 1;
static char lcd_text[32];
static char lcd_text_default[32];
+
+static struct workqueue_struct *led_wq;
+static void led_work_func(void *);
+static DECLARE_WORK(led_task, led_work_func, NULL);
+
#if 0
#define DPRINTK(x) printk x
#else
#define DPRINTK(x)
#endif
-
struct lcd_block {
unsigned char command; /* stores the command byte */
unsigned char on; /* value for turning LED on */
@@ -116,12 +125,27 @@
#define LCD_DATA_REG lcd_info.lcd_data_reg_addr
#define LED_DATA_REG lcd_info.lcd_cmd_reg_addr /* LASI & ASP only */
+#define LED_HASLCD 1
+#define LED_NOLCD 0
+
+/* The workqueue must be created at init-time */
+static int start_task(void)
+{
+ /* Display the default text now */
+ if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
+
+ /* Create the work queue and queue the LED task */
+ led_wq = create_singlethread_workqueue("led_wq");
+ queue_work(led_wq, &led_task);
+
+ return 0;
+}
+
+device_initcall(start_task);
/* ptr to LCD/LED-specific function */
static void (*led_func_ptr) (unsigned char);
-#define LED_HASLCD 1
-#define LED_NOLCD 0
#ifdef CONFIG_PROC_FS
static int led_proc_read(char *page, char **start, off_t off, int count,
int *eof, void *data)
@@ -286,52 +310,35 @@
/*
**
** led_LCD_driver()
- **
- ** The logic of the LCD driver is, that we write at every scheduled call
- ** only to one of LCD_CMD_REG _or_ LCD_DATA_REG - registers.
- ** That way we don't need to let this tasklet busywait for min_cmd_delay
- ** milliseconds.
- **
- ** TODO: check the value of "min_cmd_delay" against the value of HZ.
**
*/
static void led_LCD_driver(unsigned char leds)
{
- static int last_index; /* 0:heartbeat, 1:disk, 2:lan_in, 3:lan_out */
- static int last_was_cmd;/* 0: CMD was written last, 1: DATA was last */
- struct lcd_block *block_ptr;
- int value;
-
- switch (last_index) {
- case 0: block_ptr = &lcd_info.heartbeat;
- value = leds & LED_HEARTBEAT;
- break;
- case 1: block_ptr = &lcd_info.disk_io;
- value = leds & LED_DISK_IO;
- break;
- case 2: block_ptr = &lcd_info.lan_rcv;
- value = leds & LED_LAN_RCV;
- break;
- case 3: block_ptr = &lcd_info.lan_tx;
- value = leds & LED_LAN_TX;
- break;
- default: /* should never happen: */
- return;
- }
-
- if (last_was_cmd) {
- /* write the value to the LCD data port */
- gsc_writeb( value ? block_ptr->on : block_ptr->off, LCD_DATA_REG );
- } else {
- /* write the command-byte to the LCD command register */
- gsc_writeb( block_ptr->command, LCD_CMD_REG );
- }
+ static int i;
+ static unsigned char mask[4] = { LED_HEARTBEAT, LED_DISK_IO,
+ LED_LAN_RCV, LED_LAN_TX };
- /* now update the vars for the next interrupt iteration */
- if (++last_was_cmd == 2) { /* switch between cmd & data */
- last_was_cmd = 0;
- if (++last_index == 4)
- last_index = 0; /* switch back to heartbeat index */
+ static struct lcd_block * blockp[4] = {
+ &lcd_info.heartbeat,
+ &lcd_info.disk_io,
+ &lcd_info.lan_rcv,
+ &lcd_info.lan_tx
+ };
+
+ /* Convert min_cmd_delay to milliseconds */
+ unsigned int msec_cmd_delay = 1 + (lcd_info.min_cmd_delay / 1000);
+
+ for (i=0; i<4; ++i)
+ {
+ if ((leds & mask[i]) != (lastleds & mask[i]))
+ {
+ gsc_writeb( blockp[i]->command, LCD_CMD_REG );
+ msleep(msec_cmd_delay);
+
+ gsc_writeb( leds & mask[i] ? blockp[i]->on :
+ blockp[i]->off, LCD_DATA_REG );
+ msleep(msec_cmd_delay);
+ }
}
}
@@ -356,7 +363,7 @@
rx_total = tx_total = 0;
- /* we are running as tasklet, so locking dev_base
+ /* we are running as a workqueue task, so locking dev_base
* for reading should be OK */
read_lock(&dev_base_lock);
rcu_read_lock();
@@ -405,7 +412,7 @@
static unsigned long last_pgpgin, last_pgpgout;
struct page_state pgstat;
int changed;
-
+
get_full_page_state(&pgstat); /* get no of sectors in & out */
/* Just use a very simple calculation here. Do not care about overflow,
@@ -413,87 +420,71 @@
changed = (pgstat.pgpgin != last_pgpgin) || (pgstat.pgpgout != last_pgpgout);
last_pgpgin = pgstat.pgpgin;
last_pgpgout = pgstat.pgpgout;
-
+
return (changed ? LED_DISK_IO : 0);
}
/*
- ** led_tasklet_func()
+ ** led_work_func()
**
- ** is scheduled at every timer interrupt from time.c and
- ** updates the chassis LCD/LED
+ ** manages when and which chassis LCD/LED gets updated
TODO:
- display load average (older machines like 715/64 have 4 "free" LED's for that)
- optimizations
*/
-#define HEARTBEAT_LEN (HZ*6/100)
-#define HEARTBEAT_2ND_RANGE_START (HZ*22/100)
+#define HEARTBEAT_LEN (HZ*10/100)
+#define HEARTBEAT_2ND_RANGE_START (HZ*28/100)
#define HEARTBEAT_2ND_RANGE_END (HEARTBEAT_2ND_RANGE_START + HEARTBEAT_LEN)
-#define NORMALIZED_COUNT(count) (count/(HZ/100))
+#define LED_UPDATE_INTERVAL (1 + (HZ*19/1000))
-static void led_tasklet_func(unsigned long unused)
+static void led_work_func (void *unused)
{
- static unsigned char lastleds;
- unsigned char currentleds; /* stores current value of the LEDs */
- static unsigned long count; /* static incremented value, not wrapped */
+ static unsigned long last_jiffies;
static unsigned long count_HZ; /* counter in range 0..HZ */
+ unsigned char currentleds = 0; /* stores current value of the LEDs */
/* exit if not initialized */
if (!led_func_ptr)
return;
- /* increment the local counters */
- ++count;
- if (++count_HZ == HZ)
+ /* increment the heartbeat timekeeper */
+ count_HZ += jiffies - last_jiffies;
+ last_jiffies = jiffies;
+ if (count_HZ >= HZ)
count_HZ = 0;
- currentleds = lastleds;
-
- if (led_heartbeat)
+ if (likely(led_heartbeat))
{
- /* flash heartbeat-LED like a real heart (2 x short then a long delay) */
- if (count_HZ<HEARTBEAT_LEN ||
- (count_HZ>=HEARTBEAT_2ND_RANGE_START && count_HZ<HEARTBEAT_2ND_RANGE_END))
- currentleds |= LED_HEARTBEAT;
- else
- currentleds &= ~LED_HEARTBEAT;
+ /* flash heartbeat-LED like a real heart
+ * (2 x short then a long delay)
+ */
+ if (count_HZ < HEARTBEAT_LEN ||
+ (count_HZ >= HEARTBEAT_2ND_RANGE_START &&
+ count_HZ < HEARTBEAT_2ND_RANGE_END))
+ currentleds |= LED_HEARTBEAT;
}
- /* look for network activity and flash LEDs respectively */
- if (led_lanrxtx && ((NORMALIZED_COUNT(count)+(8/2)) & 7) == 0)
- {
- currentleds &= ~(LED_LAN_RCV | LED_LAN_TX);
- currentleds |= led_get_net_activity();
- }
-
- /* avoid to calculate diskio-stats at same irq as netio-stats */
- if (led_diskio && (NORMALIZED_COUNT(count) & 7) == 0)
- {
- currentleds &= ~LED_DISK_IO;
- currentleds |= led_get_diskio_activity();
- }
+ if (likely(led_lanrxtx)) currentleds |= led_get_net_activity();
+ if (likely(led_diskio)) currentleds |= led_get_diskio_activity();
/* blink all LEDs twice a second if we got an Oops (HPMC) */
- if (oops_in_progress) {
+ if (unlikely(oops_in_progress))
currentleds = (count_HZ<=(HZ/2)) ? 0 : 0xff;
+
+ if (currentleds != lastleds)
+ {
+ led_func_ptr(currentleds); /* Update the LCD/LEDs */
+ lastleds = currentleds;
}
-
- /* update the LCD/LEDs */
- if (currentleds != lastleds) {
- led_func_ptr(currentleds);
- lastleds = currentleds;
- }
+
+ queue_delayed_work(led_wq, &led_task, LED_UPDATE_INTERVAL);
}
-/* main led tasklet struct (scheduled from time.c) */
-DECLARE_TASKLET_DISABLED(led_tasklet, led_tasklet_func, 0);
-
-
/*
** led_halt()
**
@@ -522,9 +513,13 @@
default: return NOTIFY_DONE;
}
- /* completely stop the LED/LCD tasklet */
- tasklet_disable(&led_tasklet);
-
+ /* Cancel the work item and delete the queue */
+ if (led_wq) {
+ cancel_rearming_delayed_workqueue(led_wq, &led_task);
+ destroy_workqueue(led_wq);
+ led_wq = NULL;
+ }
+
if (lcd_info.model == DISPLAY_MODEL_LCD)
lcd_print(txt);
else
@@ -559,7 +554,6 @@
printk(KERN_INFO "LCD display at %lx,%lx registered\n",
LCD_CMD_REG , LCD_DATA_REG);
led_func_ptr = led_LCD_driver;
- lcd_print( lcd_text_default );
led_type = LED_HASLCD;
break;
@@ -589,9 +583,11 @@
initialized++;
register_reboot_notifier(&led_notifier);
- /* start the led tasklet for the first time */
- tasklet_enable(&led_tasklet);
-
+ /* Ensure the work is queued */
+ if (led_wq) {
+ queue_work(led_wq, &led_task);
+ }
+
return 0;
}
@@ -626,8 +622,8 @@
** lcd_print()
**
** Displays the given string on the LCD-Display of newer machines.
- ** lcd_print() disables the timer-based led tasklet during its
- ** execution and enables it afterwards again.
+ ** lcd_print() disables/enables the timer-based led work queue to
+ ** avoid a race condition while writing the CMD/DATA register pair.
**
*/
int lcd_print( char *str )
@@ -637,12 +633,13 @@
if (!led_func_ptr || lcd_info.model != DISPLAY_MODEL_LCD)
return 0;
- /* temporarily disable the led tasklet */
- tasklet_disable(&led_tasklet);
+ /* temporarily disable the led work task */
+ if (led_wq)
+ cancel_rearming_delayed_workqueue(led_wq, &led_task);
/* copy display string to buffer for procfs */
strlcpy(lcd_text, str, sizeof(lcd_text));
-
+
/* Set LCD Cursor to 1st character */
gsc_writeb(lcd_info.reset_cmd1, LCD_CMD_REG);
udelay(lcd_info.min_cmd_delay);
@@ -656,8 +653,10 @@
udelay(lcd_info.min_cmd_delay);
}
- /* re-enable the led tasklet */
- tasklet_enable(&led_tasklet);
+ /* re-queue the work */
+ if (led_wq) {
+ queue_work(led_wq, &led_task);
+ }
return lcd_info.lcd_width;
}
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 67c8f3b..273a741 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -536,7 +536,7 @@
out += sprintf(out, "Memory tested: ");
if ((result & 0x0F) < 0x0E)
- out += sprintf(out, "%.3f MB", 0.256*(1<<(result & 0x0F)));
+ out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256);
else
out += sprintf(out, "All");
out += sprintf(out, "\n");
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 82ea68b..c85653f 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -91,8 +91,8 @@
#define DBG_RES(x...)
#endif
-#if defined(__LP64__) && !defined(CONFIG_PDC_NARROW)
-/* "low end" PA8800 machines use ZX1 chipset */
+#if defined(CONFIG_64BIT)
+/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
#define ZX1_SUPPORT
#endif
@@ -231,7 +231,7 @@
spinlock_t res_lock;
unsigned int res_bitshift; /* from the LEFT! */
unsigned int res_size; /* size of resource map in bytes */
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
/* FIXME : DMA HINTs not used */
unsigned long hint_mask_pdir; /* bits used for DMA hints */
unsigned int hint_shift_pdir;
@@ -294,7 +294,7 @@
/* Looks nice and keeps the compiler happy */
#define SBA_DEV(d) ((struct sba_device *) (d))
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
static int reserve_sba_gart = 1;
#endif
@@ -314,7 +314,7 @@
#define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr)
#define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define READ_REG(addr) READ_REG64(addr)
#define WRITE_REG(value, addr) WRITE_REG64(value, addr)
#else
@@ -324,7 +324,7 @@
#ifdef DEBUG_SBA_INIT
-/* NOTE: When __LP64__ isn't defined, READ_REG64() is two 32-bit reads */
+/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */
/**
* sba_dump_ranges - debugging only - print ranges assigned to this IOA
@@ -364,7 +364,7 @@
#else
#define sba_dump_ranges(x)
#define sba_dump_tlb(x)
-#endif
+#endif /* DEBUG_SBA_INIT */
#ifdef ASSERT_PDIR_SANITY
@@ -674,7 +674,7 @@
*
***************************************************************/
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
#endif
@@ -743,9 +743,8 @@
* (bit #61, big endian), we have to flush and sync every time
* IO-PDIR is changed in Ike/Astro.
*/
- if (ioc_needs_fdc) {
- asm volatile("fdc 0(%%sr1,%0)\n\tsync" : : "r" (pdir_ptr));
- }
+ if (ioc_needs_fdc)
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
}
@@ -769,42 +768,57 @@
sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
{
u32 iovp = (u32) SBA_IOVP(ioc,iova);
-
- /* Even though this is a big-endian machine, the entries
- ** in the iopdir are little endian. That's why we clear the byte
- ** at +7 instead of at +0.
- */
- int off = PDIR_INDEX(iovp)*sizeof(u64)+7;
+ u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)];
#ifdef ASSERT_PDIR_SANITY
- /* Assert first pdir entry is set */
- if (0x80 != (((u8 *) ioc->pdir_base)[off])) {
+ /* Assert first pdir entry is set.
+ **
+ ** Even though this is a big-endian machine, the entries
+ ** in the iopdir are little endian. That's why we look at
+ ** the byte at +7 instead of at +0.
+ */
+ if (0x80 != (((u8 *) pdir_ptr)[7])) {
sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
}
#endif
- if (byte_cnt <= IOVP_SIZE)
+ if (byte_cnt > IOVP_SIZE)
{
- iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
+#if 0
+ unsigned long entries_per_cacheline = ioc_needs_fdc ?
+ L1_CACHE_ALIGN(((unsigned long) pdir_ptr))
+ - (unsigned long) pdir_ptr;
+ : 262144;
+#endif
- /*
- ** clear I/O PDIR entry "valid" bit
- ** Do NOT clear the rest - save it for debugging.
- ** We should only clear bits that have previously
- ** been enabled.
- */
- ((u8 *)(ioc->pdir_base))[off] = 0;
- } else {
- u32 t = get_order(byte_cnt) + PAGE_SHIFT;
+ /* set "size" field for PCOM */
+ iovp |= get_order(byte_cnt) + PAGE_SHIFT;
- iovp |= t;
do {
/* clear I/O Pdir entry "valid" bit first */
- ((u8 *)(ioc->pdir_base))[off] = 0;
- off += sizeof(u64);
+ ((u8 *) pdir_ptr)[7] = 0;
+ if (ioc_needs_fdc) {
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
+#if 0
+ entries_per_cacheline = L1_CACHE_SHIFT - 3;
+#endif
+ }
+ pdir_ptr++;
byte_cnt -= IOVP_SIZE;
- } while (byte_cnt > 0);
- }
+ } while (byte_cnt > IOVP_SIZE);
+ } else
+ iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
+
+ /*
+ ** clear I/O PDIR entry "valid" bit.
+ ** We have to R/M/W the cacheline regardless how much of the
+ ** pdir entry that we clobber.
+ ** The rest of the entry would be useful for debugging if we
+ ** could dump core on HPMC.
+ */
+ ((u8 *) pdir_ptr)[7] = 0;
+ if (ioc_needs_fdc)
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM);
}
@@ -819,18 +833,29 @@
static int sba_dma_supported( struct device *dev, u64 mask)
{
struct ioc *ioc;
+
if (dev == NULL) {
printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
BUG();
return(0);
}
+ /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
+ * then fall back to 32-bit if that fails.
+ * We are just "encouraging" 32-bit DMA masks here since we can
+ * never allow IOMMU bypass unless we add special support for ZX1.
+ */
+ if (mask > ~0U)
+ return 0;
+
ioc = GET_IOC(dev);
- /* check if mask is > than the largest IO Virt Address */
-
- return((int) (mask >= (ioc->ibase +
- (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
+ /*
+ * check if mask is >= than the current max IO Virt Address
+ * The max IO Virt address will *always* < 30 bits.
+ */
+ return((int)(mask >= (ioc->ibase - 1 +
+ (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
}
@@ -898,11 +923,17 @@
size -= IOVP_SIZE;
pdir_start++;
}
- /* form complete address */
+
+ /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
#ifdef ASSERT_PDIR_SANITY
sba_check_pdir(ioc,"Check after sba_map_single()");
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
+
+ /* form complete address */
return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
}
@@ -958,12 +989,19 @@
d--;
}
ioc->saved_cnt = 0;
+
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
}
#else /* DELAYED_RESOURCE_CNT == 0 */
sba_free_range(ioc, iova, size);
+
+ /* If fdc's were issued, force fdc's to be visible now */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
#endif /* DELAYED_RESOURCE_CNT == 0 */
+
spin_unlock_irqrestore(&ioc->res_lock, flags);
/* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
@@ -986,7 +1024,7 @@
* See Documentation/DMA-mapping.txt
*/
static void *sba_alloc_consistent(struct device *hwdev, size_t size,
- dma_addr_t *dma_handle, int gfp)
+ dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
@@ -1106,6 +1144,10 @@
*/
filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);
+ /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
{
@@ -1234,8 +1276,10 @@
unsigned long pdir_order = get_order(pdir_size);
pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
- if (NULL == (void *) pdir_base)
- panic("sba_ioc_init() could not allocate I/O Page Table\n");
+ if (NULL == (void *) pdir_base) {
+ panic("%s() could not allocate I/O Page Table\n",
+ __FUNCTION__);
+ }
/* If this is not PA8700 (PCX-W2)
** OR newer than ver 2.2
@@ -1322,19 +1366,29 @@
return (void *) pdir_base;
}
-/* setup Mercury or Elroy IBASE/IMASK registers. */
-static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+static struct device *next_device(struct klist_iter *i)
{
- /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+ struct klist_node * n = klist_next(i);
+ return n ? container_of(n, struct device, knode_parent) : NULL;
+}
+
+/* setup Mercury or Elroy IBASE/IMASK registers. */
+static void
+setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+{
+ /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
extern void lba_set_iregs(struct parisc_device *, u32, u32);
struct device *dev;
+ struct klist_iter i;
- list_for_each_entry(dev, &sba->dev.children, node) {
+ klist_iter_init(&sba->dev.klist_children, &i);
+ while ((dev = next_device(&i))) {
struct parisc_device *lba = to_parisc_device(dev);
- int rope_num = (lba->hpa >> 13) & 0xf;
+ int rope_num = (lba->hpa.start >> 13) & 0xf;
if (rope_num >> 3 == ioc_num)
lba_set_iregs(lba, ioc->ibase, ioc->imask);
}
+ klist_iter_exit(&i);
}
static void
@@ -1343,7 +1397,7 @@
u32 iova_space_mask;
u32 iova_space_size;
int iov_order, tcnfg;
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
int agp_found = 0;
#endif
/*
@@ -1380,7 +1434,7 @@
DBG_INIT("%s() pdir %p size %x\n",
__FUNCTION__, ioc->pdir_base, ioc->pdir_size);
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
@@ -1404,7 +1458,7 @@
WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK);
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/*
** Setting the upper bits makes checking for bypass addresses
** a little faster later on.
@@ -1437,7 +1491,7 @@
*/
WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
/*
** If an AGP device is present, only use half of the IOV space
** for PCI DMA. Unfortunately we can't know ahead of time
@@ -1489,11 +1543,9 @@
if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
iova_space_size = 1 << (20 - PAGE_SHIFT);
}
-#ifdef __LP64__
else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
iova_space_size = 1 << (30 - PAGE_SHIFT);
}
-#endif
/*
** iova space must be log2() in size.
@@ -1519,7 +1571,7 @@
DBG_INIT("%s() pdir %p size %x\n",
__FUNCTION__, ioc->pdir_base, pdir_size);
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
/* FIXME : DMA HINTs not used */
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
@@ -1590,7 +1642,7 @@
static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset)
{
- return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE);
+ return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
}
static void sba_hw_init(struct sba_device *sba_dev)
@@ -1968,7 +2020,7 @@
u32 func_class;
int i;
char *version;
- void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE);
+ void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
sba_dump_ranges(sba_addr);
@@ -2010,7 +2062,7 @@
}
printk(KERN_INFO "%s found %s at 0x%lx\n",
- MODULE_NAME, version, dev->hpa);
+ MODULE_NAME, version, dev->hpa.start);
sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
if (!sba_dev) {
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index e0efed7..bab3bca 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -11,6 +11,7 @@
* (C) Copyright 2000 Alex deVries <alex@onefishtwo.ca>
* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
+ * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -405,6 +406,7 @@
serial[0].iobase = sio_dev.sp1_base;
serial[0].irq = SP1_IRQ;
+ spin_lock_init(&serial[0].lock);
retval = early_serial_setup(&serial[0]);
if (retval < 0) {
@@ -414,6 +416,7 @@
serial[1].iobase = sio_dev.sp2_base;
serial[1].irq = SP2_IRQ;
+ spin_lock_init(&serial[1].lock);
retval = early_serial_setup(&serial[1]);
if (retval < 0)
diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c
index e547d7d..17dce2a 100644
--- a/drivers/parisc/wax.c
+++ b/drivers/parisc/wax.c
@@ -81,7 +81,7 @@
return -ENOMEM;
wax->name = "wax";
- wax->hpa = dev->hpa;
+ wax->hpa = dev->hpa.start;
wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */
printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 02d72ac..fde29a7 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -359,11 +359,12 @@
unsigned long port;
if (!dev->irq) {
- printk("IRQ not found for parallel device at 0x%lx\n", dev->hpa);
+ printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
+ dev->hpa.start);
return -ENODEV;
}
- port = dev->hpa + PARPORT_GSC_OFFSET;
+ port = dev->hpa.start + PARPORT_GSC_OFFSET;
/* some older machines with ASP-chip don't support
* the enhanced parport modes.
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 24a76de..2a42add 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -60,3 +60,92 @@
EXPORT_SYMBOL(pci_bus_write_config_byte);
EXPORT_SYMBOL(pci_bus_write_config_word);
EXPORT_SYMBOL(pci_bus_write_config_dword);
+
+static u32 pci_user_cached_config(struct pci_dev *dev, int pos)
+{
+ u32 data;
+
+ data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])];
+ data >>= (pos % sizeof(dev->saved_config_space[0])) * 8;
+ return data;
+}
+
+#define PCI_USER_READ_CONFIG(size,type) \
+int pci_user_read_config_##size \
+ (struct pci_dev *dev, int pos, type *val) \
+{ \
+ unsigned long flags; \
+ int ret = 0; \
+ u32 data = -1; \
+ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
+ spin_lock_irqsave(&pci_lock, flags); \
+ if (likely(!dev->block_ucfg_access)) \
+ ret = dev->bus->ops->read(dev->bus, dev->devfn, \
+ pos, sizeof(type), &data); \
+ else if (pos < sizeof(dev->saved_config_space)) \
+ data = pci_user_cached_config(dev, pos); \
+ spin_unlock_irqrestore(&pci_lock, flags); \
+ *val = (type)data; \
+ return ret; \
+}
+
+#define PCI_USER_WRITE_CONFIG(size,type) \
+int pci_user_write_config_##size \
+ (struct pci_dev *dev, int pos, type val) \
+{ \
+ unsigned long flags; \
+ int ret = -EIO; \
+ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
+ spin_lock_irqsave(&pci_lock, flags); \
+ if (likely(!dev->block_ucfg_access)) \
+ ret = dev->bus->ops->write(dev->bus, dev->devfn, \
+ pos, sizeof(type), val); \
+ spin_unlock_irqrestore(&pci_lock, flags); \
+ return ret; \
+}
+
+PCI_USER_READ_CONFIG(byte, u8)
+PCI_USER_READ_CONFIG(word, u16)
+PCI_USER_READ_CONFIG(dword, u32)
+PCI_USER_WRITE_CONFIG(byte, u8)
+PCI_USER_WRITE_CONFIG(word, u16)
+PCI_USER_WRITE_CONFIG(dword, u32)
+
+/**
+ * pci_block_user_cfg_access - Block userspace PCI config reads/writes
+ * @dev: pci device struct
+ *
+ * This function blocks any userspace PCI config accesses from occurring.
+ * When blocked, any writes will be bit bucketed and reads will return the
+ * data saved using pci_save_state for the first 64 bytes of config
+ * space and return 0xff for all other config reads.
+ **/
+void pci_block_user_cfg_access(struct pci_dev *dev)
+{
+ unsigned long flags;
+
+ pci_save_state(dev);
+
+ /* spinlock to synchronize with anyone reading config space now */
+ spin_lock_irqsave(&pci_lock, flags);
+ dev->block_ucfg_access = 1;
+ spin_unlock_irqrestore(&pci_lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
+
+/**
+ * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
+ * @dev: pci device struct
+ *
+ * This function allows userspace PCI config accesses to resume.
+ **/
+void pci_unblock_user_cfg_access(struct pci_dev *dev)
+{
+ unsigned long flags;
+
+ /* spinlock to synchronize with anyone reading saved config space */
+ spin_lock_irqsave(&pci_lock, flags);
+ dev->block_ucfg_access = 0;
+ spin_unlock_irqrestore(&pci_lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 424e7de..8e21f6a 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -58,6 +58,9 @@
static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
static void handle_hotplug_event_func (acpi_handle, u32, void *);
+static void acpiphp_sanitize_bus(struct pci_bus *bus);
+static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus);
+
/*
* initialization & terminatation routines
@@ -796,8 +799,13 @@
}
}
+ pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
+ acpiphp_sanitize_bus(bus);
+ pci_enable_bridges(bus);
pci_bus_add_devices(bus);
+ acpiphp_set_hpp_values(DEVICE_ACPI_HANDLE(&bus->self->dev), bus);
+ acpiphp_configure_ioapics(DEVICE_ACPI_HANDLE(&bus->self->dev));
/* associate pci_dev to our representation */
list_for_each (l, &slot->funcs) {
diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c
index a62a434..2d4639d6 100644
--- a/drivers/pci/hotplug/cpcihp_generic.c
+++ b/drivers/pci/hotplug/cpcihp_generic.c
@@ -39,6 +39,7 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
+#include <linux/string.h>
#include "cpci_hotplug.h"
#define DRIVER_VERSION "0.1"
diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c
index e992802..f7cb00d 100644
--- a/drivers/pci/hotplug/cpcihp_zt5550.c
+++ b/drivers/pci/hotplug/cpcihp_zt5550.c
@@ -36,6 +36,7 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
+#include <linux/signal.h> /* SA_SHIRQ */
#include "cpci_hotplug.h"
#include "cpcihp_zt5550.h"
@@ -78,11 +79,20 @@
static int zt5550_hc_config(struct pci_dev *pdev)
{
+ int ret;
+
/* Since we know that no boards exist with two HC chips, treat it as an error */
if(hc_dev) {
err("too many host controller devices?");
return -EBUSY;
}
+
+ ret = pci_enable_device(pdev);
+ if(ret) {
+ err("cannot enable %s\n", pci_name(pdev));
+ return ret;
+ }
+
hc_dev = pdev;
dbg("hc_dev = %p", hc_dev);
dbg("pci resource start %lx", pci_resource_start(hc_dev, 1));
@@ -91,7 +101,8 @@
if(!request_mem_region(pci_resource_start(hc_dev, 1),
pci_resource_len(hc_dev, 1), MY_NAME)) {
err("cannot reserve MMIO region");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto exit_disable_device;
}
hc_registers =
@@ -99,9 +110,8 @@
if(!hc_registers) {
err("cannot remap MMIO region %lx @ %lx",
pci_resource_len(hc_dev, 1), pci_resource_start(hc_dev, 1));
- release_mem_region(pci_resource_start(hc_dev, 1),
- pci_resource_len(hc_dev, 1));
- return -ENODEV;
+ ret = -ENODEV;
+ goto exit_release_region;
}
csr_hc_index = hc_registers + CSR_HCINDEX;
@@ -124,6 +134,13 @@
writeb((u8) ALL_DIRECT_INTS_MASK, csr_int_mask);
dbg("disabled timer0, timer1 and ENUM interrupts");
return 0;
+
+exit_release_region:
+ release_mem_region(pci_resource_start(hc_dev, 1),
+ pci_resource_len(hc_dev, 1));
+exit_disable_device:
+ pci_disable_device(hc_dev);
+ return ret;
}
static int zt5550_hc_cleanup(void)
@@ -134,6 +151,7 @@
iounmap(hc_registers);
release_mem_region(pci_resource_start(hc_dev, 1),
pci_resource_len(hc_dev, 1));
+ pci_disable_device(hc_dev);
return 0;
}
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 8c6d398..9aed8ef 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -794,12 +794,21 @@
u32 rc;
struct controller *ctrl;
struct pci_func *func;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n",
+ pci_name(pdev), err);
+ return err;
+ }
// Need to read VID early b/c it's used to differentiate CPQ and INTC discovery
rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) {
err(msg_HPC_non_compaq_or_intel);
- return -ENODEV;
+ rc = -ENODEV;
+ goto err_disable_device;
}
dbg("Vendor ID: %x\n", vendor_id);
@@ -807,7 +816,8 @@
dbg("revision: %d\n", rev);
if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) {
err(msg_HPC_rev_error);
- return -ENODEV;
+ rc = -ENODEV;
+ goto err_disable_device;
}
/* Check for the proper subsytem ID's
@@ -820,18 +830,20 @@
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
err("%s : pci_read_config_word failed\n", __FUNCTION__);
- return rc;
+ goto err_disable_device;
}
dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
err(msg_HPC_non_compaq_or_intel);
- return -ENODEV;
+ rc = -ENODEV;
+ goto err_disable_device;
}
ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL);
if (!ctrl) {
err("%s : out of memory\n", __FUNCTION__);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto err_disable_device;
}
memset(ctrl, 0, sizeof(struct controller));
@@ -1264,6 +1276,8 @@
kfree(ctrl->pci_bus);
err_free_ctrl:
kfree(ctrl);
+err_disable_device:
+ pci_disable_device(pdev);
return rc;
}
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 8e47fa6..060d747 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -37,6 +37,8 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "pci_hotplug.h"
#include "../pci.h"
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 0392e00..aabf1e7 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -1077,7 +1077,7 @@
if (rc) {
err("Adding this card exceeds the limitations of this bus.\n");
err("(i.e., >1 133MHz cards running on same bus, or "
- ">2 66 PCI cards running on same bus\n.");
+ ">2 66 PCI cards running on same bus.\n");
err("Try hot-adding into another bus\n");
rc = -EINVAL;
goto error_nopower;
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 33b539b..ff17d8e 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -113,7 +113,7 @@
*/
int pciehp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
{
-#if defined(CONFIG_X86) && !defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_IO_APIC)
int rc;
u16 temp_word;
struct pci_dev fakedev;
diff --git a/drivers/pci/hotplug/pciehprm_nonacpi.c b/drivers/pci/hotplug/pciehprm_nonacpi.c
index 3622965..33b2c69 100644
--- a/drivers/pci/hotplug/pciehprm_nonacpi.c
+++ b/drivers/pci/hotplug/pciehprm_nonacpi.c
@@ -33,10 +33,13 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/slab.h>
+
#include <asm/uaccess.h>
#ifdef CONFIG_IA64
#include <asm/iosapic.h>
#endif
+
#include "pciehp.h"
#include "pciehprm.h"
#include "pciehprm_nonacpi.h"
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index ad1017d..fcb66b9 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -16,10 +16,13 @@
*/
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/string.h>
+
#include <asm/pci-bridge.h>
#include <asm/semaphore.h>
#include <asm/rtas.h>
#include <asm/vio.h>
+
#include "../pci.h"
#include "rpaphp.h"
#include "rpadlpar.h"
diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h
index 61d94d1..71ea5f9 100644
--- a/drivers/pci/hotplug/rpaphp.h
+++ b/drivers/pci/hotplug/rpaphp.h
@@ -92,9 +92,10 @@
extern int rpaphp_claim_resource(struct pci_dev *dev, int resource);
extern int rpaphp_enable_pci_slot(struct slot *slot);
extern int register_pci_slot(struct slot *slot);
-extern int rpaphp_unconfig_pci_adapter(struct slot *slot);
extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value);
+
extern int rpaphp_config_pci_adapter(struct pci_bus *bus);
+extern int rpaphp_unconfig_pci_adapter(struct pci_bus *bus);
/* rpaphp_core.c */
extern int rpaphp_add_slot(struct device_node *dn);
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index c830ff0..cf075c3 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -426,8 +426,11 @@
dbg("DISABLING SLOT %s\n", slot->name);
down(&rpaphp_sem);
- retval = rpaphp_unconfig_pci_adapter(slot);
+ retval = rpaphp_unconfig_pci_adapter(slot->bus);
up(&rpaphp_sem);
+ slot->state = NOT_CONFIGURED;
+ info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__,
+ slot->name);
exit:
dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
return retval;
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index 49e4d10..f7c12d7 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -23,11 +23,13 @@
*
*/
#include <linux/pci.h>
+#include <linux/string.h>
+
#include <asm/pci-bridge.h>
#include <asm/rtas.h>
#include <asm/machdep.h>
-#include "../pci.h" /* for pci_add_new_bus */
+#include "../pci.h" /* for pci_add_new_bus */
#include "rpaphp.h"
static struct pci_bus *find_bus_among_children(struct pci_bus *bus,
@@ -319,20 +321,15 @@
return;
}
-int rpaphp_unconfig_pci_adapter(struct slot *slot)
+int rpaphp_unconfig_pci_adapter(struct pci_bus *bus)
{
struct pci_dev *dev, *tmp;
- int retval = 0;
- list_for_each_entry_safe(dev, tmp, slot->pci_devs, bus_list) {
+ list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
rpaphp_eeh_remove_bus_device(dev);
pci_remove_bus_device(dev);
}
-
- slot->state = NOT_CONFIGURED;
- info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__,
- slot->name);
- return retval;
+ return 0;
}
static int setup_pci_hotplug_slot_info(struct slot *slot)
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index 0e88154..daa89ae 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -27,6 +27,9 @@
#include <linux/kobject.h>
#include <linux/sysfs.h>
#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
#include <asm/rtas.h>
#include "rpaphp.h"
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index b7d1c61..08ad26a 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -32,8 +32,8 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <asm/semaphore.h>
-#include <asm/io.h>
+#include <linux/sched.h> /* signal_pending(), struct timer_list */
+
#include "pci_hotplug.h"
#if !defined(MODULE)
@@ -52,42 +52,18 @@
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
-struct pci_func {
- struct pci_func *next;
- u8 bus;
- u8 device;
- u8 function;
- u8 is_a_board;
- u16 status;
- u8 configured;
- u8 switch_save;
- u8 presence_save;
- u8 pwr_save;
- u32 base_length[0x06];
- u8 base_type[0x06];
- u16 reserved2;
- u32 config_space[0x20];
- struct pci_resource *mem_head;
- struct pci_resource *p_mem_head;
- struct pci_resource *io_head;
- struct pci_resource *bus_head;
- struct pci_dev* pci_dev;
-};
-
#define SLOT_MAGIC 0x67267321
struct slot {
u32 magic;
struct slot *next;
u8 bus;
u8 device;
+ u16 status;
u32 number;
u8 is_a_board;
- u8 configured;
u8 state;
- u8 switch_save;
u8 presence_save;
- u32 capabilities;
- u16 reserved2;
+ u8 pwr_save;
struct timer_list task_event;
u8 hp_slot;
struct controller *ctrl;
@@ -96,12 +72,6 @@
struct list_head slot_list;
};
-struct pci_resource {
- struct pci_resource * next;
- u32 base;
- u32 length;
-};
-
struct event_info {
u32 event_type;
u8 hp_slot;
@@ -110,13 +80,9 @@
struct controller {
struct controller *next;
struct semaphore crit_sect; /* critical section semaphore */
- void * hpc_ctlr_handle; /* HPC controller handle */
+ struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
int num_slots; /* Number of slots on ctlr */
int slot_num_inc; /* 1 or -1 */
- struct pci_resource *mem_head;
- struct pci_resource *p_mem_head;
- struct pci_resource *io_head;
- struct pci_resource *bus_head;
struct pci_dev *pci_dev;
struct pci_bus *pci_bus;
struct event_info event_queue[10];
@@ -124,33 +90,21 @@
struct hpc_ops *hpc_ops;
wait_queue_head_t queue; /* sleep & wake process */
u8 next_event;
- u8 seg;
u8 bus;
u8 device;
u8 function;
- u8 rev;
u8 slot_device_offset;
u8 add_support;
enum pci_bus_speed speed;
u32 first_slot; /* First physical slot number */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
- u8 push_flag;
- u16 ctlrcap;
- u16 vendor_id;
};
-struct irq_mapping {
- u8 barber_pole;
- u8 valid_INT;
- u8 interrupt[4];
-};
-
-struct resource_lists {
- struct pci_resource *mem_head;
- struct pci_resource *p_mem_head;
- struct pci_resource *io_head;
- struct pci_resource *bus_head;
- struct irq_mapping *irqs;
+struct hotplug_params {
+ u8 cache_line_size;
+ u8 latency_timer;
+ u8 enable_serr;
+ u8 enable_perr;
};
/* Define AMD SHPC ID */
@@ -194,24 +148,16 @@
* error Messages
*/
#define msg_initialization_err "Initialization failure, error=%d\n"
-#define msg_HPC_rev_error "Unsupported revision of the PCI hot plug controller found.\n"
-#define msg_HPC_non_shpc "The PCI hot plug controller is not supported by this driver.\n"
-#define msg_HPC_not_supported "This system is not supported by this version of shpcphd mdoule. Upgrade to a newer version of shpchpd\n"
-#define msg_unable_to_save "Unable to store PCI hot plug add resource information. This system must be rebooted before adding any PCI devices.\n"
#define msg_button_on "PCI slot #%d - powering on due to button press.\n"
#define msg_button_off "PCI slot #%d - powering off due to button press.\n"
#define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n"
-#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n"
/* sysfs functions for the hotplug controller info */
extern void shpchp_create_ctrl_files (struct controller *ctrl);
/* controller functions */
-extern int shpchprm_find_available_resources(struct controller *ctrl);
extern int shpchp_event_start_thread(void);
extern void shpchp_event_stop_thread(void);
-extern struct pci_func *shpchp_slot_create(unsigned char busnumber);
-extern struct pci_func *shpchp_slot_find(unsigned char bus, unsigned char device, unsigned char index);
extern int shpchp_enable_slot(struct slot *slot);
extern int shpchp_disable_slot(struct slot *slot);
@@ -220,29 +166,20 @@
extern u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id);
extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id);
-/* resource functions */
-extern int shpchp_resource_sort_and_combine(struct pci_resource **head);
-
/* pci functions */
-extern int shpchp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
-/*extern int shpchp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num, struct slot *slot);*/
extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
-extern int shpchp_save_used_resources(struct controller *ctrl, struct pci_func * func, int flag);
-extern int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot);
-extern void shpchp_destroy_board_resources(struct pci_func * func);
-extern int shpchp_return_board_resources(struct pci_func * func, struct resource_lists * resources);
-extern void shpchp_destroy_resource_list(struct resource_lists * resources);
-extern int shpchp_configure_device(struct controller* ctrl, struct pci_func* func);
-extern int shpchp_unconfigure_device(struct pci_func* func);
+extern int shpchp_configure_device(struct slot *p_slot);
+extern int shpchp_unconfigure_device(struct slot *p_slot);
+extern void get_hp_hw_control_from_firmware(struct pci_dev *dev);
+extern void get_hp_params_from_firmware(struct pci_dev *dev,
+ struct hotplug_params *hpp);
+extern int shpchprm_get_physical_slot_number(struct controller *ctrl,
+ u32 *sun, u8 busnum, u8 devnum);
+extern void shpchp_remove_ctrl_files(struct controller *ctrl);
/* Global variables */
extern struct controller *shpchp_ctrl_list;
-extern struct pci_func *shpchp_slot_list[256];
-
-/* These are added to support AMD shpc */
-extern u8 shpchp_nic_irq;
-extern u8 shpchp_disk_irq;
struct ctrl_reg {
volatile u32 base_offset;
@@ -298,7 +235,7 @@
SLOT11 = offsetof(struct ctrl_reg, slot11),
SLOT12 = offsetof(struct ctrl_reg, slot12),
};
-typedef u8(*php_intr_callback_t) (unsigned int change_id, void *instance_id);
+typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
struct php_ctlr_state_s {
struct php_ctlr_state_s *pnext;
struct pci_dev *pci_dev;
@@ -359,12 +296,9 @@
p_slot = ctrl->slot;
- dbg("p_slot = %p\n", p_slot);
-
while (p_slot && (p_slot->device != device)) {
tmp_slot = p_slot;
p_slot = p_slot->next;
- dbg("In while loop, p_slot = %p\n", p_slot);
}
if (p_slot == NULL) {
err("ERROR: shpchp_find_slot device=0x%x\n", device);
@@ -379,8 +313,6 @@
DECLARE_WAITQUEUE(wait, current);
int retval = 0;
- dbg("%s : start\n",__FUNCTION__);
-
add_wait_queue(&ctrl->queue, &wait);
if (!shpchp_poll_mode) {
@@ -394,19 +326,9 @@
if (signal_pending(current))
retval = -EINTR;
- dbg("%s : end\n", __FUNCTION__);
return retval;
}
-/* Puts node back in the resource list pointed to by head */
-static inline void return_resource(struct pci_resource **head, struct pci_resource *node)
-{
- if (!node || !head)
- return;
- node->next = *head;
- *head = node;
-}
-
#define SLOT_NAME_SIZE 10
static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
@@ -420,11 +342,7 @@
ACPI
};
-int shpc_init( struct controller *ctrl, struct pci_dev *pdev,
- php_intr_callback_t attention_button_callback,
- php_intr_callback_t switch_change_callback,
- php_intr_callback_t presence_change_callback,
- php_intr_callback_t power_fault_callback);
+int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
int shpc_get_ctlr_slot_config( struct controller *ctrl,
int *num_ctlr_slots,
@@ -437,8 +355,6 @@
int (*power_on_slot ) (struct slot *slot);
int (*slot_enable ) (struct slot *slot);
int (*slot_disable ) (struct slot *slot);
- int (*enable_all_slots) (struct slot *slot);
- int (*pwr_on_all_slots) (struct slot *slot);
int (*set_bus_speed_mode) (struct slot *slot, enum pci_bus_speed speed);
int (*get_power_status) (struct slot *slot, u8 *status);
int (*get_attention_status) (struct slot *slot, u8 *status);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 6f7d8a2..63628e0 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -27,26 +27,18 @@
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
#include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
#include "shpchp.h"
-#include "shpchprm.h"
/* Global variables */
int shpchp_debug;
int shpchp_poll_mode;
int shpchp_poll_time;
struct controller *shpchp_ctrl_list; /* = NULL */
-struct pci_func *shpchp_slot_list[256];
#define DRIVER_VERSION "0.4"
#define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>"
@@ -113,8 +105,6 @@
u32 slot_number, sun;
int result = -ENOMEM;
- dbg("%s\n",__FUNCTION__);
-
number_of_slots = ctrl->num_slots;
slot_device = ctrl->slot_device_offset;
slot_number = ctrl->first_slot;
@@ -352,6 +342,17 @@
return 0;
}
+static int is_shpc_capable(struct pci_dev *dev)
+{
+ if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
+ PCI_DEVICE_ID_AMD_GOLAM_7450))
+ return 1;
+ if (pci_find_capability(dev, PCI_CAP_ID_SHPC))
+ return 1;
+
+ return 0;
+}
+
static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int rc;
@@ -360,6 +361,9 @@
int first_device_num; /* first PCI device number supported by this SHPC */
int num_ctlr_slots; /* number of slots supported by this SHPC */
+ if (!is_shpc_capable(pdev))
+ return -ENODEV;
+
ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL);
if (!ctrl) {
err("%s : out of memory\n", __FUNCTION__);
@@ -367,19 +371,12 @@
}
memset(ctrl, 0, sizeof(struct controller));
- dbg("DRV_thread pid = %d\n", current->pid);
-
- rc = shpc_init(ctrl, pdev,
- (php_intr_callback_t) shpchp_handle_attention_button,
- (php_intr_callback_t) shpchp_handle_switch_change,
- (php_intr_callback_t) shpchp_handle_presence_change,
- (php_intr_callback_t) shpchp_handle_power_fault);
+ rc = shpc_init(ctrl, pdev);
if (rc) {
dbg("%s: controller initialization failed\n", SHPC_MODULE_NAME);
goto err_out_free_ctrl;
}
- dbg("%s: controller initialization success\n", __FUNCTION__);
ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
pci_set_drvdata(pdev, ctrl);
@@ -411,23 +408,8 @@
first_device_num = ctrl->slot_device_offset;
num_ctlr_slots = ctrl->num_slots;
- /* Store PCI Config Space for all devices on this bus */
- rc = shpchp_save_config(ctrl, ctrl->slot_bus, num_ctlr_slots, first_device_num);
- if (rc) {
- err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc);
- goto err_out_free_ctrl_bus;
- }
-
- /* Get IO, memory, and IRQ resources for new devices */
- rc = shpchprm_find_available_resources(ctrl);
- ctrl->add_support = !rc;
+ ctrl->add_support = 1;
- if (rc) {
- dbg("shpchprm_find_available_resources = %#x\n", rc);
- err("unable to locate PCI configuration resources for hot plug add.\n");
- goto err_out_free_ctrl_bus;
- }
-
/* Setup the slot information structures */
rc = init_slots(ctrl);
if (rc) {
@@ -477,7 +459,6 @@
static int shpc_start_thread(void)
{
- int loop;
int retval = 0;
dbg("Initialize + Start the notification/polling mechanism \n");
@@ -488,48 +469,21 @@
return retval;
}
- dbg("Initialize slot lists\n");
- /* One slot list for each bus in the system */
- for (loop = 0; loop < 256; loop++) {
- shpchp_slot_list[loop] = NULL;
- }
-
return retval;
}
-static inline void __exit
-free_shpchp_res(struct pci_resource *res)
-{
- struct pci_resource *tres;
-
- while (res) {
- tres = res;
- res = res->next;
- kfree(tres);
- }
-}
-
static void __exit unload_shpchpd(void)
{
- struct pci_func *next;
- struct pci_func *TempSlot;
- int loop;
struct controller *ctrl;
struct controller *tctrl;
ctrl = shpchp_ctrl_list;
while (ctrl) {
+ shpchp_remove_ctrl_files(ctrl);
cleanup_slots(ctrl);
- free_shpchp_res(ctrl->io_head);
- free_shpchp_res(ctrl->mem_head);
- free_shpchp_res(ctrl->p_mem_head);
- free_shpchp_res(ctrl->bus_head);
-
kfree (ctrl->pci_bus);
-
- dbg("%s: calling release_ctlr\n", __FUNCTION__);
ctrl->hpc_ops->release_ctlr(ctrl);
tctrl = ctrl;
@@ -538,20 +492,6 @@
kfree(tctrl);
}
- for (loop = 0; loop < 256; loop++) {
- next = shpchp_slot_list[loop];
- while (next != NULL) {
- free_shpchp_res(next->io_head);
- free_shpchp_res(next->mem_head);
- free_shpchp_res(next->p_mem_head);
- free_shpchp_res(next->bus_head);
-
- TempSlot = next;
- next = next->next;
- kfree(TempSlot);
- }
- }
-
/* Stop the notification mechanism */
shpchp_event_stop_thread();
@@ -596,20 +536,14 @@
if (retval)
goto error_hpc_init;
- retval = shpchprm_init(PCI);
- if (!retval) {
- retval = pci_register_driver(&shpc_driver);
- dbg("%s: pci_register_driver = %d\n", __FUNCTION__, retval);
- info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
- }
+ retval = pci_register_driver(&shpc_driver);
+ dbg("%s: pci_register_driver = %d\n", __FUNCTION__, retval);
+ info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
error_hpc_init:
if (retval) {
- shpchprm_cleanup();
shpchp_event_stop_thread();
- } else
- shpchprm_print_pirt();
-
+ }
return retval;
}
@@ -618,9 +552,6 @@
dbg("unload_shpchpd()\n");
unload_shpchpd();
- shpchprm_cleanup();
-
- dbg("pci_unregister_driver\n");
pci_unregister_driver(&shpc_driver);
info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n");
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 91c9903..5861935 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -27,24 +27,14 @@
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/wait.h>
#include <linux/smp_lock.h>
#include <linux/pci.h>
+#include "../pci.h"
#include "shpchp.h"
-#include "shpchprm.h"
-static u32 configure_new_device(struct controller *ctrl, struct pci_func *func,
- u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev);
-static int configure_new_function( struct controller *ctrl, struct pci_func *func,
- u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev);
static void interrupt_event_handler(struct controller *ctrl);
static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
@@ -52,28 +42,22 @@
static int event_finished;
static unsigned long pushbutton_pending; /* = 0 */
-u8 shpchp_disk_irq;
-u8 shpchp_nic_irq;
-
u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
{
struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
u8 getstatus;
- struct pci_func *func;
struct event_info *taskInfo;
/* Attention Button Change */
dbg("shpchp: Attention button interrupt received.\n");
- func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
/* This is the structure that tells the worker thread what to do */
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
ctrl->next_event = (ctrl->next_event + 1) % 10;
@@ -118,14 +102,11 @@
struct slot *p_slot;
u8 rc = 0;
u8 getstatus;
- struct pci_func *func;
struct event_info *taskInfo;
/* Switch Change */
dbg("shpchp: Switch interrupt received.\n");
- func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
/* This is the structure that tells the worker thread
* what to do
*/
@@ -135,19 +116,18 @@
rc++;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
dbg("%s: Card present %x Power status %x\n", __FUNCTION__,
- func->presence_save, func->pwr_save);
+ p_slot->presence_save, p_slot->pwr_save);
if (getstatus) {
/*
* Switch opened
*/
info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
- func->switch_save = 0;
taskInfo->event_type = INT_SWITCH_OPEN;
- if (func->pwr_save && func->presence_save) {
+ if (p_slot->pwr_save && p_slot->presence_save) {
taskInfo->event_type = INT_POWER_FAULT;
err("Surprise Removal of card\n");
}
@@ -156,7 +136,6 @@
* Switch closed
*/
info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
- func->switch_save = 0x10;
taskInfo->event_type = INT_SWITCH_CLOSE;
}
@@ -172,14 +151,11 @@
struct slot *p_slot;
u8 rc = 0;
/*u8 temp_byte;*/
- struct pci_func *func;
struct event_info *taskInfo;
/* Presence Change */
dbg("shpchp: Presence/Notify input change.\n");
- func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
/* This is the structure that tells the worker thread
* what to do
*/
@@ -193,8 +169,8 @@
/*
* Save the presence state
*/
- p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
- if (func->presence_save) {
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
+ if (p_slot->presence_save) {
/*
* Card Present
*/
@@ -219,14 +195,11 @@
struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
- struct pci_func *func;
struct event_info *taskInfo;
/* Power fault */
dbg("shpchp: Power fault interrupt received.\n");
- func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
/* This is the structure that tells the worker thread
* what to do
*/
@@ -242,7 +215,7 @@
* Power fault Cleared
*/
info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
- func->status = 0x00;
+ p_slot->status = 0x00;
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
@@ -251,7 +224,7 @@
info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_POWER_FAULT;
/* set power fault status for this board */
- func->status = 0xFF;
+ p_slot->status = 0xFF;
info("power fault bit %x set\n", hp_slot);
}
if (rc)
@@ -260,799 +233,13 @@
return rc;
}
-
-/*
- * sort_by_size
- *
- * Sorts nodes on the list by their length.
- * Smallest first.
- *
- */
-static int sort_by_size(struct pci_resource **head)
-{
- struct pci_resource *current_res;
- struct pci_resource *next_res;
- int out_of_order = 1;
-
- if (!(*head))
- return(1);
-
- if (!((*head)->next))
- return(0);
-
- while (out_of_order) {
- out_of_order = 0;
-
- /* Special case for swapping list head */
- if (((*head)->next) &&
- ((*head)->length > (*head)->next->length)) {
- out_of_order++;
- current_res = *head;
- *head = (*head)->next;
- current_res->next = (*head)->next;
- (*head)->next = current_res;
- }
-
- current_res = *head;
-
- while (current_res->next && current_res->next->next) {
- if (current_res->next->length > current_res->next->next->length) {
- out_of_order++;
- next_res = current_res->next;
- current_res->next = current_res->next->next;
- current_res = current_res->next;
- next_res->next = current_res->next;
- current_res->next = next_res;
- } else
- current_res = current_res->next;
- }
- } /* End of out_of_order loop */
-
- return(0);
-}
-
-
-/*
- * sort_by_max_size
- *
- * Sorts nodes on the list by their length.
- * Largest first.
- *
- */
-static int sort_by_max_size(struct pci_resource **head)
-{
- struct pci_resource *current_res;
- struct pci_resource *next_res;
- int out_of_order = 1;
-
- if (!(*head))
- return(1);
-
- if (!((*head)->next))
- return(0);
-
- while (out_of_order) {
- out_of_order = 0;
-
- /* Special case for swapping list head */
- if (((*head)->next) &&
- ((*head)->length < (*head)->next->length)) {
- out_of_order++;
- current_res = *head;
- *head = (*head)->next;
- current_res->next = (*head)->next;
- (*head)->next = current_res;
- }
-
- current_res = *head;
-
- while (current_res->next && current_res->next->next) {
- if (current_res->next->length < current_res->next->next->length) {
- out_of_order++;
- next_res = current_res->next;
- current_res->next = current_res->next->next;
- current_res = current_res->next;
- next_res->next = current_res->next;
- current_res->next = next_res;
- } else
- current_res = current_res->next;
- }
- } /* End of out_of_order loop */
-
- return(0);
-}
-
-
-/*
- * do_pre_bridge_resource_split
- *
- * Returns zero or one node of resources that aren't in use
- *
- */
-static struct pci_resource *do_pre_bridge_resource_split (struct pci_resource **head, struct pci_resource **orig_head, u32 alignment)
-{
- struct pci_resource *prevnode = NULL;
- struct pci_resource *node;
- struct pci_resource *split_node;
- u32 rc;
- u32 temp_dword;
- dbg("do_pre_bridge_resource_split\n");
-
- if (!(*head) || !(*orig_head))
- return(NULL);
-
- rc = shpchp_resource_sort_and_combine(head);
-
- if (rc)
- return(NULL);
-
- if ((*head)->base != (*orig_head)->base)
- return(NULL);
-
- if ((*head)->length == (*orig_head)->length)
- return(NULL);
-
-
- /* If we got here, there the bridge requires some of the resource, but
- * we may be able to split some off of the front
- */
- node = *head;
-
- if (node->length & (alignment -1)) {
- /* This one isn't an aligned length, so we'll make a new entry
- * and split it up.
- */
- split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
-
- if (!split_node)
- return(NULL);
-
- temp_dword = (node->length | (alignment-1)) + 1 - alignment;
-
- split_node->base = node->base;
- split_node->length = temp_dword;
-
- node->length -= temp_dword;
- node->base += split_node->length;
-
- /* Put it in the list */
- *head = split_node;
- split_node->next = node;
- }
-
- if (node->length < alignment) {
- return(NULL);
- }
-
- /* Now unlink it */
- if (*head == node) {
- *head = node->next;
- node->next = NULL;
- } else {
- prevnode = *head;
- while (prevnode->next != node)
- prevnode = prevnode->next;
-
- prevnode->next = node->next;
- node->next = NULL;
- }
-
- return(node);
-}
-
-
-/*
- * do_bridge_resource_split
- *
- * Returns zero or one node of resources that aren't in use
- *
- */
-static struct pci_resource *do_bridge_resource_split (struct pci_resource **head, u32 alignment)
-{
- struct pci_resource *prevnode = NULL;
- struct pci_resource *node;
- u32 rc;
- u32 temp_dword;
-
- if (!(*head))
- return(NULL);
-
- rc = shpchp_resource_sort_and_combine(head);
-
- if (rc)
- return(NULL);
-
- node = *head;
-
- while (node->next) {
- prevnode = node;
- node = node->next;
- kfree(prevnode);
- }
-
- if (node->length < alignment) {
- kfree(node);
- return(NULL);
- }
-
- if (node->base & (alignment - 1)) {
- /* Short circuit if adjusted size is too small */
- temp_dword = (node->base | (alignment-1)) + 1;
- if ((node->length - (temp_dword - node->base)) < alignment) {
- kfree(node);
- return(NULL);
- }
-
- node->length -= (temp_dword - node->base);
- node->base = temp_dword;
- }
-
- if (node->length & (alignment - 1)) {
- /* There's stuff in use after this node */
- kfree(node);
- return(NULL);
- }
-
- return(node);
-}
-
-
-/*
- * get_io_resource
- *
- * this function sorts the resource list by size and then
- * returns the first node of "size" length that is not in the
- * ISA aliasing window. If it finds a node larger than "size"
- * it will split it up.
- *
- * size must be a power of two.
- */
-static struct pci_resource *get_io_resource (struct pci_resource **head, u32 size)
-{
- struct pci_resource *prevnode;
- struct pci_resource *node;
- struct pci_resource *split_node = NULL;
- u32 temp_dword;
-
- if (!(*head))
- return(NULL);
-
- if ( shpchp_resource_sort_and_combine(head) )
- return(NULL);
-
- if ( sort_by_size(head) )
- return(NULL);
-
- for (node = *head; node; node = node->next) {
- if (node->length < size)
- continue;
-
- if (node->base & (size - 1)) {
- /* This one isn't base aligned properly
- so we'll make a new entry and split it up */
- temp_dword = (node->base | (size-1)) + 1;
-
- /*/ Short circuit if adjusted size is too small */
- if ((node->length - (temp_dword - node->base)) < size)
- continue;
-
- split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
-
- if (!split_node)
- return(NULL);
-
- split_node->base = node->base;
- split_node->length = temp_dword - node->base;
- node->base = temp_dword;
- node->length -= split_node->length;
-
- /* Put it in the list */
- split_node->next = node->next;
- node->next = split_node;
- } /* End of non-aligned base */
-
- /* Don't need to check if too small since we already did */
- if (node->length > size) {
- /* This one is longer than we need
- so we'll make a new entry and split it up */
- split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
-
- if (!split_node)
- return(NULL);
-
- split_node->base = node->base + size;
- split_node->length = node->length - size;
- node->length = size;
-
- /* Put it in the list */
- split_node->next = node->next;
- node->next = split_node;
- } /* End of too big on top end */
-
- /* For IO make sure it's not in the ISA aliasing space */
- if (node->base & 0x300L)
- continue;
-
- /* If we got here, then it is the right size
- Now take it out of the list */
- if (*head == node) {
- *head = node->next;
- } else {
- prevnode = *head;
- while (prevnode->next != node)
- prevnode = prevnode->next;
-
- prevnode->next = node->next;
- }
- node->next = NULL;
- /* Stop looping */
- break;
- }
-
- return(node);
-}
-
-
-/*
- * get_max_resource
- *
- * Gets the largest node that is at least "size" big from the
- * list pointed to by head. It aligns the node on top and bottom
- * to "size" alignment before returning it.
- * J.I. modified to put max size limits of; 64M->32M->16M->8M->4M->1M
- * This is needed to avoid allocating entire ACPI _CRS res to one child bridge/slot.
- */
-static struct pci_resource *get_max_resource (struct pci_resource **head, u32 size)
-{
- struct pci_resource *max;
- struct pci_resource *temp;
- struct pci_resource *split_node;
- u32 temp_dword;
- u32 max_size[] = { 0x4000000, 0x2000000, 0x1000000, 0x0800000, 0x0400000, 0x0200000, 0x0100000, 0x00 };
- int i;
-
- if (!(*head))
- return(NULL);
-
- if (shpchp_resource_sort_and_combine(head))
- return(NULL);
-
- if (sort_by_max_size(head))
- return(NULL);
-
- for (max = *head;max; max = max->next) {
-
- /* If not big enough we could probably just bail,
- instead we'll continue to the next. */
- if (max->length < size)
- continue;
-
- if (max->base & (size - 1)) {
- /* This one isn't base aligned properly
- so we'll make a new entry and split it up */
- temp_dword = (max->base | (size-1)) + 1;
-
- /* Short circuit if adjusted size is too small */
- if ((max->length - (temp_dword - max->base)) < size)
- continue;
-
- split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
-
- if (!split_node)
- return(NULL);
-
- split_node->base = max->base;
- split_node->length = temp_dword - max->base;
- max->base = temp_dword;
- max->length -= split_node->length;
-
- /* Put it next in the list */
- split_node->next = max->next;
- max->next = split_node;
- }
-
- if ((max->base + max->length) & (size - 1)) {
- /* This one isn't end aligned properly at the top
- so we'll make a new entry and split it up */
- split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
-
- if (!split_node)
- return(NULL);
- temp_dword = ((max->base + max->length) & ~(size - 1));
- split_node->base = temp_dword;
- split_node->length = max->length + max->base
- - split_node->base;
- max->length -= split_node->length;
-
- /* Put it in the list */
- split_node->next = max->next;
- max->next = split_node;
- }
-
- /* Make sure it didn't shrink too much when we aligned it */
- if (max->length < size)
- continue;
-
- for ( i = 0; max_size[i] > size; i++) {
- if (max->length > max_size[i]) {
- split_node = kmalloc(sizeof(*split_node),
- GFP_KERNEL);
- if (!split_node)
- break; /* return (NULL); */
- split_node->base = max->base + max_size[i];
- split_node->length = max->length - max_size[i];
- max->length = max_size[i];
- /* Put it next in the list */
- split_node->next = max->next;
- max->next = split_node;
- break;
- }
- }
-
- /* Now take it out of the list */
- temp = (struct pci_resource*) *head;
- if (temp == max) {
- *head = max->next;
- } else {
- while (temp && temp->next != max) {
- temp = temp->next;
- }
-
- temp->next = max->next;
- }
-
- max->next = NULL;
- return(max);
- }
-
- /* If we get here, we couldn't find one */
- return(NULL);
-}
-
-
-/*
- * get_resource
- *
- * this function sorts the resource list by size and then
- * returns the first node of "size" length. If it finds a node
- * larger than "size" it will split it up.
- *
- * size must be a power of two.
- */
-static struct pci_resource *get_resource (struct pci_resource **head, u32 size)
-{
- struct pci_resource *prevnode;
- struct pci_resource *node;
- struct pci_resource *split_node;
- u32 temp_dword;
-
- if (!(*head))
- return(NULL);
-
- if ( shpchp_resource_sort_and_combine(head) )
- return(NULL);
-
- if ( sort_by_size(head) )
- return(NULL);
-
- for (node = *head; node; node = node->next) {
- dbg("%s: req_size =0x%x node=%p, base=0x%x, length=0x%x\n",
- __FUNCTION__, size, node, node->base, node->length);
- if (node->length < size)
- continue;
-
- if (node->base & (size - 1)) {
- dbg("%s: not aligned\n", __FUNCTION__);
- /* this one isn't base aligned properly
- so we'll make a new entry and split it up */
- temp_dword = (node->base | (size-1)) + 1;
-
- /* Short circuit if adjusted size is too small */
- if ((node->length - (temp_dword - node->base)) < size)
- continue;
-
- split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
-
- if (!split_node)
- return(NULL);
-
- split_node->base = node->base;
- split_node->length = temp_dword - node->base;
- node->base = temp_dword;
- node->length -= split_node->length;
-
- /* Put it in the list */
- split_node->next = node->next;
- node->next = split_node;
- } /* End of non-aligned base */
-
- /* Don't need to check if too small since we already did */
- if (node->length > size) {
- dbg("%s: too big\n", __FUNCTION__);
- /* this one is longer than we need
- so we'll make a new entry and split it up */
- split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
-
- if (!split_node)
- return(NULL);
-
- split_node->base = node->base + size;
- split_node->length = node->length - size;
- node->length = size;
-
- /* Put it in the list */
- split_node->next = node->next;
- node->next = split_node;
- } /* End of too big on top end */
-
- dbg("%s: got one!!!\n", __FUNCTION__);
- /* If we got here, then it is the right size
- Now take it out of the list */
- if (*head == node) {
- *head = node->next;
- } else {
- prevnode = *head;
- while (prevnode->next != node)
- prevnode = prevnode->next;
-
- prevnode->next = node->next;
- }
- node->next = NULL;
- /* Stop looping */
- break;
- }
- return(node);
-}
-
-
-/*
- * shpchp_resource_sort_and_combine
- *
- * Sorts all of the nodes in the list in ascending order by
- * their base addresses. Also does garbage collection by
- * combining adjacent nodes.
- *
- * returns 0 if success
- */
-int shpchp_resource_sort_and_combine(struct pci_resource **head)
-{
- struct pci_resource *node1;
- struct pci_resource *node2;
- int out_of_order = 1;
-
- dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head);
-
- if (!(*head))
- return(1);
-
- dbg("*head->next = %p\n",(*head)->next);
-
- if (!(*head)->next)
- return(0); /* only one item on the list, already sorted! */
-
- dbg("*head->base = 0x%x\n",(*head)->base);
- dbg("*head->next->base = 0x%x\n",(*head)->next->base);
- while (out_of_order) {
- out_of_order = 0;
-
- /* Special case for swapping list head */
- if (((*head)->next) &&
- ((*head)->base > (*head)->next->base)) {
- node1 = *head;
- (*head) = (*head)->next;
- node1->next = (*head)->next;
- (*head)->next = node1;
- out_of_order++;
- }
-
- node1 = (*head);
-
- while (node1->next && node1->next->next) {
- if (node1->next->base > node1->next->next->base) {
- out_of_order++;
- node2 = node1->next;
- node1->next = node1->next->next;
- node1 = node1->next;
- node2->next = node1->next;
- node1->next = node2;
- } else
- node1 = node1->next;
- }
- } /* End of out_of_order loop */
-
- node1 = *head;
-
- while (node1 && node1->next) {
- if ((node1->base + node1->length) == node1->next->base) {
- /* Combine */
- dbg("8..\n");
- node1->length += node1->next->length;
- node2 = node1->next;
- node1->next = node1->next->next;
- kfree(node2);
- } else
- node1 = node1->next;
- }
-
- return(0);
-}
-
-
-/**
- * shpchp_slot_create - Creates a node and adds it to the proper bus.
- * @busnumber - bus where new node is to be located
- *
- * Returns pointer to the new node or NULL if unsuccessful
- */
-struct pci_func *shpchp_slot_create(u8 busnumber)
-{
- struct pci_func *new_slot;
- struct pci_func *next;
-
- new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
-
- if (new_slot == NULL) {
- return(new_slot);
- }
-
- memset(new_slot, 0, sizeof(struct pci_func));
-
- new_slot->next = NULL;
- new_slot->configured = 1;
-
- if (shpchp_slot_list[busnumber] == NULL) {
- shpchp_slot_list[busnumber] = new_slot;
- } else {
- next = shpchp_slot_list[busnumber];
- while (next->next != NULL)
- next = next->next;
- next->next = new_slot;
- }
- return(new_slot);
-}
-
-
-/*
- * slot_remove - Removes a node from the linked list of slots.
- * @old_slot: slot to remove
- *
- * Returns 0 if successful, !0 otherwise.
- */
-static int slot_remove(struct pci_func * old_slot)
-{
- struct pci_func *next;
-
- if (old_slot == NULL)
- return(1);
-
- next = shpchp_slot_list[old_slot->bus];
-
- if (next == NULL) {
- return(1);
- }
-
- if (next == old_slot) {
- shpchp_slot_list[old_slot->bus] = old_slot->next;
- shpchp_destroy_board_resources(old_slot);
- kfree(old_slot);
- return(0);
- }
-
- while ((next->next != old_slot) && (next->next != NULL)) {
- next = next->next;
- }
-
- if (next->next == old_slot) {
- next->next = old_slot->next;
- shpchp_destroy_board_resources(old_slot);
- kfree(old_slot);
- return(0);
- } else
- return(2);
-}
-
-
-/**
- * bridge_slot_remove - Removes a node from the linked list of slots.
- * @bridge: bridge to remove
- *
- * Returns 0 if successful, !0 otherwise.
- */
-static int bridge_slot_remove(struct pci_func *bridge)
-{
- u8 subordinateBus, secondaryBus;
- u8 tempBus;
- struct pci_func *next;
-
- if (bridge == NULL)
- return(1);
-
- secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF;
- subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF;
-
- for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
- next = shpchp_slot_list[tempBus];
-
- while (!slot_remove(next)) {
- next = shpchp_slot_list[tempBus];
- }
- }
-
- next = shpchp_slot_list[bridge->bus];
-
- if (next == NULL) {
- return(1);
- }
-
- if (next == bridge) {
- shpchp_slot_list[bridge->bus] = bridge->next;
- kfree(bridge);
- return(0);
- }
-
- while ((next->next != bridge) && (next->next != NULL)) {
- next = next->next;
- }
-
- if (next->next == bridge) {
- next->next = bridge->next;
- kfree(bridge);
- return(0);
- } else
- return(2);
-}
-
-
-/**
- * shpchp_slot_find - Looks for a node by bus, and device, multiple functions accessed
- * @bus: bus to find
- * @device: device to find
- * @index: is 0 for first function found, 1 for the second...
- *
- * Returns pointer to the node if successful, %NULL otherwise.
- */
-struct pci_func *shpchp_slot_find(u8 bus, u8 device, u8 index)
-{
- int found = -1;
- struct pci_func *func;
-
- func = shpchp_slot_list[bus];
-
- if ((func == NULL) || ((func->device == device) && (index == 0)))
- return(func);
-
- if (func->device == device)
- found++;
-
- while (func->next != NULL) {
- func = func->next;
-
- if (func->device == device)
- found++;
-
- if (found == index)
- return(func);
- }
-
- return(NULL);
-}
-
-static int is_bridge(struct pci_func * func)
-{
- /* Check the header type */
- if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01)
- return 1;
- else
- return 0;
-}
-
-
/* The following routines constitute the bulk of the
hotplug controller logic
*/
-static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum pci_bus_speed speed)
+static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
+ enum pci_bus_speed speed)
{
- u32 rc = 0;
+ int rc = 0;
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
down(&ctrl->crit_sect);
@@ -1074,10 +261,11 @@
return rc;
}
-static u32 fix_bus_speed(struct controller *ctrl, struct slot *pslot, u8 flag,
-enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp)
+static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
+ u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
+ enum pci_bus_speed msp)
{
- u32 rc = 0;
+ int rc = 0;
if (flag != 0) { /* Other slots on the same bus are occupied */
if ( asp < bsp ) {
@@ -1116,23 +304,20 @@
* Configures board
*
*/
-static u32 board_added(struct pci_func * func, struct controller * ctrl)
+static int board_added(struct slot *p_slot)
{
u8 hp_slot;
u8 slots_not_empty = 0;
- int index;
- u32 temp_register = 0xFFFFFFFF;
- u32 retval, rc = 0;
- struct pci_func *new_func = NULL;
- struct slot *p_slot;
- struct resource_lists res_lists;
+ int rc = 0;
enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
u8 pi, mode;
+ struct controller *ctrl = p_slot->ctrl;
- p_slot = shpchp_find_slot(ctrl, func->device);
- hp_slot = func->device - ctrl->slot_device_offset;
+ hp_slot = p_slot->device - ctrl->slot_device_offset;
- dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
+ dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
+ __FUNCTION__, p_slot->device,
+ ctrl->slot_device_offset, hp_slot);
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
@@ -1320,143 +505,68 @@
up(&ctrl->crit_sect);
/* Wait for ~1 second */
- dbg("%s: before long_delay\n", __FUNCTION__);
wait_for_ctrl_irq (ctrl);
- dbg("%s: after long_delay\n", __FUNCTION__);
- dbg("%s: func status = %x\n", __FUNCTION__, func->status);
+ dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status);
/* Check for a power fault */
- if (func->status == 0xFF) {
+ if (p_slot->status == 0xFF) {
/* power fault occurred, but it was benign */
- temp_register = 0xFFFFFFFF;
- dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register);
+ dbg("%s: power fault\n", __FUNCTION__);
rc = POWER_FAILURE;
- func->status = 0;
- } else {
- /* Get vendor/device ID u32 */
- rc = pci_bus_read_config_dword (ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function),
- PCI_VENDOR_ID, &temp_register);
- dbg("%s: pci_bus_read_config_dword returns %d\n", __FUNCTION__, rc);
- dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register);
-
- if (rc != 0) {
- /* Something's wrong here */
- temp_register = 0xFFFFFFFF;
- dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register);
- }
- /* Preset return code. It will be changed later if things go okay. */
- rc = NO_ADAPTER_PRESENT;
+ p_slot->status = 0;
+ goto err_exit;
}
- /* All F's is an empty slot or an invalid board */
- if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */
- res_lists.io_head = ctrl->io_head;
- res_lists.mem_head = ctrl->mem_head;
- res_lists.p_mem_head = ctrl->p_mem_head;
- res_lists.bus_head = ctrl->bus_head;
- res_lists.irqs = NULL;
-
- rc = configure_new_device(ctrl, func, 0, &res_lists, 0, 0);
- dbg("%s: back from configure_new_device\n", __FUNCTION__);
-
- ctrl->io_head = res_lists.io_head;
- ctrl->mem_head = res_lists.mem_head;
- ctrl->p_mem_head = res_lists.p_mem_head;
- ctrl->bus_head = res_lists.bus_head;
-
- shpchp_resource_sort_and_combine(&(ctrl->mem_head));
- shpchp_resource_sort_and_combine(&(ctrl->p_mem_head));
- shpchp_resource_sort_and_combine(&(ctrl->io_head));
- shpchp_resource_sort_and_combine(&(ctrl->bus_head));
-
- if (rc) {
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
- /* turn off slot, turn on Amber LED, turn off Green LED */
- retval = p_slot->hpc_ops->slot_disable(p_slot);
- if (retval) {
- err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
- return retval;
- }
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
-
- retval = p_slot->hpc_ops->check_cmd_status(ctrl);
- if (retval) {
- err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, retval);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
- return retval;
- }
-
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
- return(rc);
- }
- shpchp_save_slot_config(ctrl, func);
-
- func->status = 0;
- func->switch_save = 0x10;
- func->is_a_board = 0x01;
- func->pwr_save = 1;
-
- /* Next, we will instantiate the linux pci_dev structures
- * (with appropriate driver notification, if already present)
- */
- index = 0;
- do {
- new_func = shpchp_slot_find(ctrl->slot_bus, func->device, index++);
- if (new_func && !new_func->pci_dev) {
- dbg("%s:call pci_hp_configure_dev\n", __FUNCTION__);
- shpchp_configure_device(ctrl, new_func);
- }
- } while (new_func);
-
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
- p_slot->hpc_ops->green_led_on(p_slot);
-
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
-
-
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
- } else {
- /* Wait for exclusive access to hardware */
- down(&ctrl->crit_sect);
-
- /* turn off slot, turn on Amber LED, turn off Green LED */
- rc = p_slot->hpc_ops->slot_disable(p_slot);
- if (rc) {
- err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
- return rc;
- }
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
-
- rc = p_slot->hpc_ops->check_cmd_status(ctrl);
- if (rc) {
- err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
- return rc;
- }
-
- /* Done with exclusive hardware access */
- up(&ctrl->crit_sect);
-
- return(rc);
+ if (shpchp_configure_device(p_slot)) {
+ err("Cannot add device at 0x%x:0x%x\n", p_slot->bus,
+ p_slot->device);
+ goto err_exit;
}
+
+ p_slot->status = 0;
+ p_slot->is_a_board = 0x01;
+ p_slot->pwr_save = 1;
+
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ p_slot->hpc_ops->green_led_on(p_slot);
+
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
return 0;
+
+err_exit:
+ /* Wait for exclusive access to hardware */
+ down(&ctrl->crit_sect);
+
+ /* turn off slot, turn on Amber LED, turn off Green LED */
+ rc = p_slot->hpc_ops->slot_disable(p_slot);
+ if (rc) {
+ err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+ /* Wait for the command to complete */
+ wait_for_ctrl_irq (ctrl);
+
+ rc = p_slot->hpc_ops->check_cmd_status(ctrl);
+ if (rc) {
+ err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+ return rc;
+ }
+
+ /* Done with exclusive hardware access */
+ up(&ctrl->crit_sect);
+
+ return(rc);
}
@@ -1464,55 +574,23 @@
* remove_board - Turns off slot and LED's
*
*/
-static u32 remove_board(struct pci_func *func, struct controller *ctrl)
+static int remove_board(struct slot *p_slot)
{
- int index;
- u8 skip = 0;
- u8 device;
+ struct controller *ctrl = p_slot->ctrl;
u8 hp_slot;
- u32 rc;
- struct resource_lists res_lists;
- struct pci_func *temp_func;
- struct slot *p_slot;
+ int rc;
- if (func == NULL)
+ if (shpchp_unconfigure_device(p_slot))
return(1);
- if (shpchp_unconfigure_device(func))
- return(1);
-
- device = func->device;
-
- hp_slot = func->device - ctrl->slot_device_offset;
+ hp_slot = p_slot->device - ctrl->slot_device_offset;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
- if ((ctrl->add_support) &&
- !(func->bus_head || func->mem_head || func->p_mem_head || func->io_head)) {
- /* Here we check to see if we've saved any of the board's
- * resources already. If so, we'll skip the attempt to
- * determine what's being used.
- */
- index = 0;
-
- temp_func = func;
-
- while ((temp_func = shpchp_slot_find(temp_func->bus, temp_func->device, index++))) {
- if (temp_func->bus_head || temp_func->mem_head
- || temp_func->p_mem_head || temp_func->io_head) {
- skip = 1;
- break;
- }
- }
-
- if (!skip)
- rc = shpchp_save_used_resources(ctrl, func, DISABLE_CARD);
- }
/* Change status to shutdown */
- if (func->is_a_board)
- func->status = 0x01;
- func->configured = 0;
+ if (p_slot->is_a_board)
+ p_slot->status = 0x01;
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
@@ -1549,55 +627,8 @@
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
- if (ctrl->add_support) {
- while (func) {
- res_lists.io_head = ctrl->io_head;
- res_lists.mem_head = ctrl->mem_head;
- res_lists.p_mem_head = ctrl->p_mem_head;
- res_lists.bus_head = ctrl->bus_head;
-
- dbg("Returning resources to ctlr lists for (B/D/F) = (%#x/%#x/%#x)\n", func->bus,
- func->device, func->function);
-
- shpchp_return_board_resources(func, &res_lists);
-
- ctrl->io_head = res_lists.io_head;
- ctrl->mem_head = res_lists.mem_head;
- ctrl->p_mem_head = res_lists.p_mem_head;
- ctrl->bus_head = res_lists.bus_head;
-
- shpchp_resource_sort_and_combine(&(ctrl->mem_head));
- shpchp_resource_sort_and_combine(&(ctrl->p_mem_head));
- shpchp_resource_sort_and_combine(&(ctrl->io_head));
- shpchp_resource_sort_and_combine(&(ctrl->bus_head));
-
- if (is_bridge(func)) {
- dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus,
- func->device, func->function);
- bridge_slot_remove(func);
- } else
- dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus,
- func->device, func->function);
- slot_remove(func);
-
- func = shpchp_slot_find(ctrl->slot_bus, device, 0);
- }
-
- /* Setup slot structure with entry for empty slot */
- func = shpchp_slot_create(ctrl->slot_bus);
-
- if (func == NULL) {
- return(1);
- }
-
- func->bus = ctrl->slot_bus;
- func->device = device;
- func->function = 0;
- func->configured = 0;
- func->switch_save = 0x10;
- func->pwr_save = 0;
- func->is_a_board = 0;
- }
+ p_slot->pwr_save = 0;
+ p_slot->is_a_board = 0;
return 0;
}
@@ -1633,13 +664,11 @@
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = POWEROFF_STATE;
- dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
shpchp_disable_slot(p_slot);
p_slot->state = STATIC_STATE;
} else {
p_slot->state = POWERON_STATE;
- dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
if (shpchp_enable_slot(p_slot)) {
/* Wait for exclusive access to hardware */
@@ -1701,7 +730,6 @@
err ("Can't start up our event thread\n");
return -1;
}
- dbg("Our event thread pid = %d\n", pid);
return 0;
}
@@ -1709,9 +737,7 @@
void shpchp_event_stop_thread (void)
{
event_finished = 1;
- dbg("event_thread finish command given\n");
up(&event_semaphore);
- dbg("wait for event_thread to exit\n");
down(&event_exit);
}
@@ -1739,12 +765,10 @@
{
int loop = 0;
int change = 1;
- struct pci_func *func;
u8 hp_slot;
u8 getstatus;
struct slot *p_slot;
- dbg("%s:\n", __FUNCTION__);
while (change) {
change = 0;
@@ -1754,12 +778,8 @@
ctrl->event_queue[loop].event_type);
hp_slot = ctrl->event_queue[loop].hp_slot;
- func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- dbg("%s: hp_slot %d, func %p, p_slot %p\n", __FUNCTION__, hp_slot, func, p_slot);
-
if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) {
dbg("%s: button cancel\n", __FUNCTION__);
del_timer(&p_slot->task_event);
@@ -1880,13 +900,6 @@
{
u8 getstatus = 0;
int rc;
- struct pci_func *func;
-
- func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
- if (!func) {
- dbg("%s: Error! slot NULL\n", __FUNCTION__);
- return -ENODEV;
- }
/* Check to see if (latch closed, card present, power off) */
down(&p_slot->ctrl->crit_sect);
@@ -1910,72 +923,34 @@
}
up(&p_slot->ctrl->crit_sect);
- slot_remove(func);
-
- func = shpchp_slot_create(p_slot->bus);
- if (func == NULL)
- return -ENOMEM;
-
- func->bus = p_slot->bus;
- func->device = p_slot->device;
- func->function = 0;
- func->configured = 0;
- func->is_a_board = 1;
+ p_slot->is_a_board = 1;
/* We have to save the presence info for these slots */
- p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
- p_slot->hpc_ops->get_power_status(p_slot, &(func->pwr_save));
- dbg("%s: func->pwr_save %x\n", __FUNCTION__, func->pwr_save);
+ p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
+ p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save));
+ dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
- func->switch_save = !getstatus? 0x10:0;
- rc = board_added(func, p_slot->ctrl);
+ rc = board_added(p_slot);
if (rc) {
- if (is_bridge(func))
- bridge_slot_remove(func);
- else
- slot_remove(func);
-
- /* Setup slot structure with entry for empty slot */
- func = shpchp_slot_create(p_slot->bus);
- if (func == NULL)
- return -ENOMEM; /* Out of memory */
-
- func->bus = p_slot->bus;
- func->device = p_slot->device;
- func->function = 0;
- func->configured = 0;
- func->is_a_board = 1;
-
- /* We have to save the presence info for these slots */
- p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+ p_slot->hpc_ops->get_adapter_status(p_slot,
+ &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
- func->switch_save = !getstatus? 0x10:0;
}
- if (p_slot)
- update_slot_info(p_slot);
-
+ update_slot_info(p_slot);
return rc;
}
int shpchp_disable_slot (struct slot *p_slot)
{
- u8 class_code, header_type, BCR;
- u8 index = 0;
u8 getstatus = 0;
- u32 rc = 0;
int ret = 0;
- unsigned int devfn;
- struct pci_bus *pci_bus;
- struct pci_func *func;
if (!p_slot->ctrl)
return -ENODEV;
- pci_bus = p_slot->ctrl->pci_dev->subordinate;
-
/* Check to see if (latch closed, card present, power on) */
down(&p_slot->ctrl->crit_sect);
@@ -1999,849 +974,8 @@
}
up(&p_slot->ctrl->crit_sect);
- func = shpchp_slot_find(p_slot->bus, p_slot->device, index++);
-
- /* Make sure there are no video controllers here
- * for all func of p_slot
- */
- while (func && !rc) {
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- /* Check the Class Code */
- rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
- if (rc)
- return -ENODEV;
-
- if (class_code == PCI_BASE_CLASS_DISPLAY) {
- /* Display/Video adapter (not supported) */
- rc = REMOVE_NOT_SUPPORTED;
- } else {
- /* See if it's a bridge */
- rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
- if (rc)
- return -ENODEV;
-
- /* If it's a bridge, check the VGA Enable bit */
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
- rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
- if (rc)
- return -ENODEV;
-
- /* If the VGA Enable bit is set, remove isn't supported */
- if (BCR & PCI_BRIDGE_CTL_VGA) {
- rc = REMOVE_NOT_SUPPORTED;
- }
- }
- }
-
- func = shpchp_slot_find(p_slot->bus, p_slot->device, index++);
- }
-
- func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
- if ((func != NULL) && !rc) {
- rc = remove_board(func, p_slot->ctrl);
- } else if (!rc)
- rc = -ENODEV;
-
- if (p_slot)
- update_slot_info(p_slot);
-
- return rc;
-}
-
-
-/**
- * configure_new_device - Configures the PCI header information of one board.
- *
- * @ctrl: pointer to controller structure
- * @func: pointer to function structure
- * @behind_bridge: 1 if this is a recursive call, 0 if not
- * @resources: pointer to set of resource lists
- *
- * Returns 0 if success
- *
- */
-static u32 configure_new_device (struct controller * ctrl, struct pci_func * func,
- u8 behind_bridge, struct resource_lists * resources, u8 bridge_bus, u8 bridge_dev)
-{
- u8 temp_byte, function, max_functions, stop_it;
- int rc;
- u32 ID;
- struct pci_func *new_slot;
- struct pci_bus lpci_bus, *pci_bus;
- int index;
-
- new_slot = func;
-
- dbg("%s\n", __FUNCTION__);
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = func->bus;
-
- /* Check for Multi-function device */
- rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte);
- if (rc) {
- dbg("%s: rc = %d\n", __FUNCTION__, rc);
- return rc;
- }
-
- if (temp_byte & 0x80) /* Multi-function device */
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- rc = configure_new_function(ctrl, new_slot, behind_bridge, resources, bridge_bus, bridge_dev);
-
- if (rc) {
- dbg("configure_new_function failed %d\n",rc);
- index = 0;
-
- while (new_slot) {
- new_slot = shpchp_slot_find(new_slot->bus, new_slot->device, index++);
-
- if (new_slot)
- shpchp_return_board_resources(new_slot, resources);
- }
-
- return(rc);
- }
-
- function++;
-
- stop_it = 0;
-
- /* The following loop skips to the next present function
- * and creates a board structure
- */
-
- while ((function < max_functions) && (!stop_it)) {
- pci_bus_read_config_dword(pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
-
- if (ID == 0xFFFFFFFF) { /* There's nothing there. */
- function++;
- } else { /* There's something there */
- /* Setup slot structure. */
- new_slot = shpchp_slot_create(func->bus);
-
- if (new_slot == NULL) {
- /* Out of memory */
- return(1);
- }
-
- new_slot->bus = func->bus;
- new_slot->device = func->device;
- new_slot->function = function;
- new_slot->is_a_board = 1;
- new_slot->status = 0;
-
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- dbg("returning from configure_new_device\n");
-
- return 0;
-}
-
-
-/*
- * Configuration logic that involves the hotplug data structures and
- * their bookkeeping
- */
-
-
-/**
- * configure_new_function - Configures the PCI header information of one device
- *
- * @ctrl: pointer to controller structure
- * @func: pointer to function structure
- * @behind_bridge: 1 if this is a recursive call, 0 if not
- * @resources: pointer to set of resource lists
- *
- * Calls itself recursively for bridged devices.
- * Returns 0 if success
- *
- */
-static int configure_new_function (struct controller * ctrl, struct pci_func * func,
- u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev)
-{
- int cloop;
- u8 temp_byte;
- u8 device;
- u8 class_code;
- u16 temp_word;
- u32 rc;
- u32 temp_register;
- u32 base;
- u32 ID;
- unsigned int devfn;
- struct pci_resource *mem_node;
- struct pci_resource *p_mem_node;
- struct pci_resource *io_node;
- struct pci_resource *bus_node;
- struct pci_resource *hold_mem_node;
- struct pci_resource *hold_p_mem_node;
- struct pci_resource *hold_IO_node;
- struct pci_resource *hold_bus_node;
- struct irq_mapping irqs;
- struct pci_func *new_slot;
- struct pci_bus lpci_bus, *pci_bus;
- struct resource_lists temp_resources;
-#if defined(CONFIG_X86_64)
- u8 IRQ=0;
-#endif
-
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- /* Check for Bridge */
- rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte);
- if (rc)
- return rc;
-
- if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
- /* set Primary bus */
- dbg("set Primary bus = 0x%x\n", func->bus);
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
- if (rc)
- return rc;
-
- /* find range of busses to use */
- bus_node = get_max_resource(&resources->bus_head, 1L);
-
- /* If we don't have any busses to allocate, we can't continue */
- if (!bus_node) {
- err("Got NO bus resource to use\n");
- return -ENOMEM;
- }
- dbg("Got ranges of buses to use: base:len=0x%x:%x\n", bus_node->base, bus_node->length);
-
- /* set Secondary bus */
- temp_byte = (u8)bus_node->base;
- dbg("set Secondary bus = 0x%x\n", temp_byte);
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte);
- if (rc)
- return rc;
-
- /* set subordinate bus */
- temp_byte = (u8)(bus_node->base + bus_node->length - 1);
- dbg("set subordinate bus = 0x%x\n", temp_byte);
- rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
- if (rc)
- return rc;
-
- /* Set HP parameters (Cache Line Size, Latency Timer) */
- rc = shpchprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_BRIDGE);
- if (rc)
- return rc;
-
- /* Setup the IO, memory, and prefetchable windows */
-
- io_node = get_max_resource(&(resources->io_head), 0x1000L);
- if (io_node) {
- dbg("io_node(base, len, next) (%x, %x, %p)\n", io_node->base, io_node->length, io_node->next);
- }
-
- mem_node = get_max_resource(&(resources->mem_head), 0x100000L);
- if (mem_node) {
- dbg("mem_node(base, len, next) (%x, %x, %p)\n", mem_node->base, mem_node->length, mem_node->next);
- }
-
- if (resources->p_mem_head)
- p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000L);
- else {
- /*
- * In some platform implementation, MEM and PMEM are not
- * distinguished, and hence ACPI _CRS has only MEM entries
- * for both MEM and PMEM.
- */
- dbg("using MEM for PMEM\n");
- p_mem_node = get_max_resource(&(resources->mem_head), 0x100000L);
- }
- if (p_mem_node) {
- dbg("p_mem_node(base, len, next) (%x, %x, %p)\n", p_mem_node->base, p_mem_node->length, p_mem_node->next);
- }
-
- /* set up the IRQ info */
- if (!resources->irqs) {
- irqs.barber_pole = 0;
- irqs.interrupt[0] = 0;
- irqs.interrupt[1] = 0;
- irqs.interrupt[2] = 0;
- irqs.interrupt[3] = 0;
- irqs.valid_INT = 0;
- } else {
- irqs.barber_pole = resources->irqs->barber_pole;
- irqs.interrupt[0] = resources->irqs->interrupt[0];
- irqs.interrupt[1] = resources->irqs->interrupt[1];
- irqs.interrupt[2] = resources->irqs->interrupt[2];
- irqs.interrupt[3] = resources->irqs->interrupt[3];
- irqs.valid_INT = resources->irqs->valid_INT;
- }
-
- /* set up resource lists that are now aligned on top and bottom
- * for anything behind the bridge.
- */
- temp_resources.bus_head = bus_node;
- temp_resources.io_head = io_node;
- temp_resources.mem_head = mem_node;
- temp_resources.p_mem_head = p_mem_node;
- temp_resources.irqs = &irqs;
-
- /* Make copies of the nodes we are going to pass down so that
- * if there is a problem,we can just use these to free resources
- */
- hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
- hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
- hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
- hold_p_mem_node = kmalloc(sizeof(*hold_p_mem_node), GFP_KERNEL);
-
- if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) {
- kfree(hold_bus_node);
- kfree(hold_IO_node);
- kfree(hold_mem_node);
- kfree(hold_p_mem_node);
-
- return 1;
- }
-
- memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource));
-
- bus_node->base += 1;
- bus_node->length -= 1;
- bus_node->next = NULL;
-
- /* If we have IO resources copy them and fill in the bridge's
- * IO range registers
- */
- if (io_node) {
- memcpy(hold_IO_node, io_node, sizeof(struct pci_resource));
- io_node->next = NULL;
-
- /* set IO base and Limit registers */
- RES_CHECK(io_node->base, 8);
- temp_byte = (u8)(io_node->base >> 8);
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte);
-
- RES_CHECK(io_node->base + io_node->length - 1, 8);
- temp_byte = (u8)((io_node->base + io_node->length - 1) >> 8);
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
- } else {
- kfree(hold_IO_node);
- hold_IO_node = NULL;
- }
-
- /* If we have memory resources copy them and fill in the bridge's
- * memory range registers. Otherwise, fill in the range
- * registers with values that disable them.
- */
- if (mem_node) {
- memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource));
- mem_node->next = NULL;
-
- /* set Mem base and Limit registers */
- RES_CHECK(mem_node->base, 16);
- temp_word = (u32)(mem_node->base >> 16);
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
-
- RES_CHECK(mem_node->base + mem_node->length - 1, 16);
- temp_word = (u32)((mem_node->base + mem_node->length - 1) >> 16);
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
- } else {
- temp_word = 0xFFFF;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
-
- temp_word = 0x0000;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
-
- kfree(hold_mem_node);
- hold_mem_node = NULL;
- }
-
- /* If we have prefetchable memory resources copy them and
- * fill in the bridge's memory range registers. Otherwise,
- * fill in the range registers with values that disable them.
- */
- if (p_mem_node) {
- memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource));
- p_mem_node->next = NULL;
-
- /* set Pre Mem base and Limit registers */
- RES_CHECK(p_mem_node->base, 16);
- temp_word = (u32)(p_mem_node->base >> 16);
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
-
- RES_CHECK(p_mem_node->base + p_mem_node->length - 1, 16);
- temp_word = (u32)((p_mem_node->base + p_mem_node->length - 1) >> 16);
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
- } else {
- temp_word = 0xFFFF;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
-
- temp_word = 0x0000;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
-
- kfree(hold_p_mem_node);
- hold_p_mem_node = NULL;
- }
-
- /* Adjust this to compensate for extra adjustment in first loop */
- irqs.barber_pole--;
-
- rc = 0;
-
- /* Here we actually find the devices and configure them */
- for (device = 0; (device <= 0x1F) && !rc; device++) {
- irqs.barber_pole = (irqs.barber_pole + 1) & 0x03;
-
- ID = 0xFFFFFFFF;
- pci_bus->number = hold_bus_node->base;
- pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
- PCI_VENDOR_ID, &ID);
- pci_bus->number = func->bus;
-
- if (ID != 0xFFFFFFFF) { /* device Present */
- /* Setup slot structure. */
- new_slot = shpchp_slot_create(hold_bus_node->base);
-
- if (new_slot == NULL) {
- /* Out of memory */
- rc = -ENOMEM;
- continue;
- }
-
- new_slot->bus = hold_bus_node->base;
- new_slot->device = device;
- new_slot->function = 0;
- new_slot->is_a_board = 1;
- new_slot->status = 0;
-
- rc = configure_new_device(ctrl, new_slot, 1, &temp_resources, func->bus, func->device);
- dbg("configure_new_device rc=0x%x\n",rc);
- } /* End of IF (device in slot?) */
- } /* End of FOR loop */
-
- if (rc) {
- shpchp_destroy_resource_list(&temp_resources);
-
- return_resource(&(resources->bus_head), hold_bus_node);
- return_resource(&(resources->io_head), hold_IO_node);
- return_resource(&(resources->mem_head), hold_mem_node);
- return_resource(&(resources->p_mem_head), hold_p_mem_node);
- return(rc);
- }
-
- /* save the interrupt routing information */
- if (resources->irqs) {
- resources->irqs->interrupt[0] = irqs.interrupt[0];
- resources->irqs->interrupt[1] = irqs.interrupt[1];
- resources->irqs->interrupt[2] = irqs.interrupt[2];
- resources->irqs->interrupt[3] = irqs.interrupt[3];
- resources->irqs->valid_INT = irqs.valid_INT;
- } else if (!behind_bridge) {
- /* We need to hook up the interrupts here */
- for (cloop = 0; cloop < 4; cloop++) {
- if (irqs.valid_INT & (0x01 << cloop)) {
- rc = shpchp_set_irq(func->bus, func->device,
- 0x0A + cloop, irqs.interrupt[cloop]);
- if (rc) {
- shpchp_destroy_resource_list (&temp_resources);
- return_resource(&(resources->bus_head), hold_bus_node);
- return_resource(&(resources->io_head), hold_IO_node);
- return_resource(&(resources->mem_head), hold_mem_node);
- return_resource(&(resources->p_mem_head), hold_p_mem_node);
- return rc;
- }
- }
- } /* end of for loop */
- }
-
- /* Return unused bus resources
- * First use the temporary node to store information for the board
- */
- if (hold_bus_node && bus_node && temp_resources.bus_head) {
- hold_bus_node->length = bus_node->base - hold_bus_node->base;
-
- hold_bus_node->next = func->bus_head;
- func->bus_head = hold_bus_node;
-
- temp_byte = (u8)(temp_resources.bus_head->base - 1);
-
- /* set subordinate bus */
- dbg("re-set subordinate bus = 0x%x\n", temp_byte);
- rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
-
- if (temp_resources.bus_head->length == 0) {
- kfree(temp_resources.bus_head);
- temp_resources.bus_head = NULL;
- } else {
- dbg("return bus res of b:d(0x%x:%x) base:len(0x%x:%x)\n",
- func->bus, func->device, temp_resources.bus_head->base, temp_resources.bus_head->length);
- return_resource(&(resources->bus_head), temp_resources.bus_head);
- }
- }
-
- /* If we have IO space available and there is some left,
- * return the unused portion
- */
- if (hold_IO_node && temp_resources.io_head) {
- io_node = do_pre_bridge_resource_split(&(temp_resources.io_head),
- &hold_IO_node, 0x1000);
-
- /* Check if we were able to split something off */
- if (io_node) {
- hold_IO_node->base = io_node->base + io_node->length;
-
- RES_CHECK(hold_IO_node->base, 8);
- temp_byte = (u8)((hold_IO_node->base) >> 8);
- rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_BASE, temp_byte);
-
- return_resource(&(resources->io_head), io_node);
- }
-
- io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000);
-
- /* Check if we were able to split something off */
- if (io_node) {
- /* First use the temporary node to store information for the board */
- hold_IO_node->length = io_node->base - hold_IO_node->base;
-
- /* If we used any, add it to the board's list */
- if (hold_IO_node->length) {
- hold_IO_node->next = func->io_head;
- func->io_head = hold_IO_node;
-
- RES_CHECK(io_node->base - 1, 8);
- temp_byte = (u8)((io_node->base - 1) >> 8);
- rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
-
- return_resource(&(resources->io_head), io_node);
- } else {
- /* it doesn't need any IO */
- temp_byte = 0x00;
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
-
- return_resource(&(resources->io_head), io_node);
- kfree(hold_IO_node);
- }
- } else {
- /* it used most of the range */
- hold_IO_node->next = func->io_head;
- func->io_head = hold_IO_node;
- }
- } else if (hold_IO_node) {
- /* it used the whole range */
- hold_IO_node->next = func->io_head;
- func->io_head = hold_IO_node;
- }
-
- /* If we have memory space available and there is some left,
- * return the unused portion
- */
- if (hold_mem_node && temp_resources.mem_head) {
- mem_node = do_pre_bridge_resource_split(&(temp_resources.mem_head), &hold_mem_node, 0x100000L);
-
- /* Check if we were able to split something off */
- if (mem_node) {
- hold_mem_node->base = mem_node->base + mem_node->length;
-
- RES_CHECK(hold_mem_node->base, 16);
- temp_word = (u32)((hold_mem_node->base) >> 16);
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
-
- return_resource(&(resources->mem_head), mem_node);
- }
-
- mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000L);
-
- /* Check if we were able to split something off */
- if (mem_node) {
- /* First use the temporary node to store information for the board */
- hold_mem_node->length = mem_node->base - hold_mem_node->base;
-
- if (hold_mem_node->length) {
- hold_mem_node->next = func->mem_head;
- func->mem_head = hold_mem_node;
-
- /* configure end address */
- RES_CHECK(mem_node->base - 1, 16);
- temp_word = (u32)((mem_node->base - 1) >> 16);
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
-
- /* Return unused resources to the pool */
- return_resource(&(resources->mem_head), mem_node);
- } else {
- /* it doesn't need any Mem */
- temp_word = 0x0000;
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
-
- return_resource(&(resources->mem_head), mem_node);
- kfree(hold_mem_node);
- }
- } else {
- /* it used most of the range */
- hold_mem_node->next = func->mem_head;
- func->mem_head = hold_mem_node;
- }
- } else if (hold_mem_node) {
- /* it used the whole range */
- hold_mem_node->next = func->mem_head;
- func->mem_head = hold_mem_node;
- }
-
- /* If we have prefetchable memory space available and there is some
- * left at the end, return the unused portion
- */
- if (hold_p_mem_node && temp_resources.p_mem_head) {
- p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head),
- &hold_p_mem_node, 0x100000L);
-
- /* Check if we were able to split something off */
- if (p_mem_node) {
- hold_p_mem_node->base = p_mem_node->base + p_mem_node->length;
-
- RES_CHECK(hold_p_mem_node->base, 16);
- temp_word = (u32)((hold_p_mem_node->base) >> 16);
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
-
- return_resource(&(resources->p_mem_head), p_mem_node);
- }
-
- p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000L);
-
- /* Check if we were able to split something off */
- if (p_mem_node) {
- /* First use the temporary node to store information for the board */
- hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base;
-
- /* If we used any, add it to the board's list */
- if (hold_p_mem_node->length) {
- hold_p_mem_node->next = func->p_mem_head;
- func->p_mem_head = hold_p_mem_node;
-
- RES_CHECK(p_mem_node->base - 1, 16);
- temp_word = (u32)((p_mem_node->base - 1) >> 16);
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
-
- return_resource(&(resources->p_mem_head), p_mem_node);
- } else {
- /* it doesn't need any PMem */
- temp_word = 0x0000;
- rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
-
- return_resource(&(resources->p_mem_head), p_mem_node);
- kfree(hold_p_mem_node);
- }
- } else {
- /* it used the most of the range */
- hold_p_mem_node->next = func->p_mem_head;
- func->p_mem_head = hold_p_mem_node;
- }
- } else if (hold_p_mem_node) {
- /* it used the whole range */
- hold_p_mem_node->next = func->p_mem_head;
- func->p_mem_head = hold_p_mem_node;
- }
-
- /* We should be configuring an IRQ and the bridge's base address
- * registers if it needs them. Although we have never seen such
- * a device
- */
-
- shpchprm_enable_card(ctrl, func, PCI_HEADER_TYPE_BRIDGE);
-
- dbg("PCI Bridge Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function);
- } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
- /* Standard device */
- u64 base64;
- rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
-
- if (class_code == PCI_BASE_CLASS_DISPLAY)
- return (DEVICE_TYPE_NOT_SUPPORTED);
-
- /* Figure out IO and memory needs */
- for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) {
- temp_register = 0xFFFFFFFF;
-
- rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
- rc = pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register);
- dbg("Bar[%x]=0x%x on bus:dev:func(0x%x:%x:%x)\n", cloop, temp_register, func->bus, func->device,
- func->function);
-
- if (!temp_register)
- continue;
-
- base64 = 0L;
- if (temp_register & PCI_BASE_ADDRESS_SPACE_IO) {
- /* Map IO */
-
- /* set base = amount of IO space */
- base = temp_register & 0xFFFFFFFC;
- base = ~base + 1;
-
- dbg("NEED IO length(0x%x)\n", base);
- io_node = get_io_resource(&(resources->io_head),(ulong)base);
-
- /* allocate the resource to the board */
- if (io_node) {
- dbg("Got IO base=0x%x(length=0x%x)\n", io_node->base, io_node->length);
- base = (u32)io_node->base;
- io_node->next = func->io_head;
- func->io_head = io_node;
- } else {
- err("Got NO IO resource(length=0x%x)\n", base);
- return -ENOMEM;
- }
- } else { /* map MEM */
- int prefetchable = 1;
- struct pci_resource **res_node = &func->p_mem_head;
- char *res_type_str = "PMEM";
- u32 temp_register2;
-
- if (!(temp_register & PCI_BASE_ADDRESS_MEM_PREFETCH)) {
- prefetchable = 0;
- res_node = &func->mem_head;
- res_type_str++;
- }
-
- base = temp_register & 0xFFFFFFF0;
- base = ~base + 1;
-
- switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) {
- case PCI_BASE_ADDRESS_MEM_TYPE_32:
- dbg("NEED 32 %s bar=0x%x(length=0x%x)\n", res_type_str, temp_register, base);
-
- if (prefetchable && resources->p_mem_head)
- mem_node=get_resource(&(resources->p_mem_head), (ulong)base);
- else {
- if (prefetchable)
- dbg("using MEM for PMEM\n");
- mem_node=get_resource(&(resources->mem_head), (ulong)base);
- }
-
- /* allocate the resource to the board */
- if (mem_node) {
- base = (u32)mem_node->base;
- mem_node->next = *res_node;
- *res_node = mem_node;
- dbg("Got 32 %s base=0x%x(length=0x%x)\n", res_type_str, mem_node->base,
- mem_node->length);
- } else {
- err("Got NO 32 %s resource(length=0x%x)\n", res_type_str, base);
- return -ENOMEM;
- }
- break;
- case PCI_BASE_ADDRESS_MEM_TYPE_64:
- rc = pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2);
- dbg("NEED 64 %s bar=0x%x:%x(length=0x%x)\n", res_type_str, temp_register2,
- temp_register, base);
-
- if (prefetchable && resources->p_mem_head)
- mem_node = get_resource(&(resources->p_mem_head), (ulong)base);
- else {
- if (prefetchable)
- dbg("using MEM for PMEM\n");
- mem_node = get_resource(&(resources->mem_head), (ulong)base);
- }
-
- /* allocate the resource to the board */
- if (mem_node) {
- base64 = mem_node->base;
- mem_node->next = *res_node;
- *res_node = mem_node;
- dbg("Got 64 %s base=0x%x:%x(length=%x)\n", res_type_str, (u32)(base64 >> 32),
- (u32)base64, mem_node->length);
- } else {
- err("Got NO 64 %s resource(length=0x%x)\n", res_type_str, base);
- return -ENOMEM;
- }
- break;
- default:
- dbg("reserved BAR type=0x%x\n", temp_register);
- break;
- }
-
- }
-
- if (base64) {
- rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64);
- cloop += 4;
- base64 >>= 32;
-
- if (base64) {
- dbg("%s: high dword of base64(0x%x) set to 0\n", __FUNCTION__, (u32)base64);
- base64 = 0x0L;
- }
-
- rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64);
- } else {
- rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
- }
- } /* End of base register loop */
-
-#if defined(CONFIG_X86_64)
- /* Figure out which interrupt pin this function uses */
- rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_INTERRUPT_PIN, &temp_byte);
-
- /* If this function needs an interrupt and we are behind a bridge
- and the pin is tied to something that's alread mapped,
- set this one the same
- */
- if (temp_byte && resources->irqs &&
- (resources->irqs->valid_INT &
- (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
- /* We have to share with something already set up */
- IRQ = resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03];
- } else {
- /* Program IRQ based on card type */
- rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
-
- if (class_code == PCI_BASE_CLASS_STORAGE) {
- IRQ = shpchp_disk_irq;
- } else {
- IRQ = shpchp_nic_irq;
- }
- }
-
- /* IRQ Line */
- rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_INTERRUPT_LINE, IRQ);
-
- if (!behind_bridge) {
- rc = shpchp_set_irq(func->bus, func->device, temp_byte + 0x09, IRQ);
- if (rc)
- return(1);
- } else {
- /* TBD - this code may also belong in the other clause of this If statement */
- resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ;
- resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03;
- }
-#endif
- /* Disable ROM base Address */
- rc = pci_bus_write_config_dword (pci_bus, devfn, PCI_ROM_ADDRESS, 0x00);
-
- /* Set HP parameters (Cache Line Size, Latency Timer) */
- rc = shpchprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_NORMAL);
- if (rc)
- return rc;
-
- shpchprm_enable_card(ctrl, func, PCI_HEADER_TYPE_NORMAL);
-
- dbg("PCI function Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function);
- } /* End of Not-A-Bridge else */
- else {
- /* It's some strange type of PCI adapter (Cardbus?) */
- return(DEVICE_TYPE_NOT_SUPPORTED);
- }
-
- func->configured = 1;
-
- return 0;
+ ret = remove_board(p_slot);
+ update_slot_info(p_slot);
+ return ret;
}
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 8d98410..40905a6 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -27,17 +27,10 @@
*
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
#include <linux/pci.h>
-#include <asm/system.h>
#include "shpchp.h"
#ifdef DEBUG
@@ -282,7 +275,7 @@
static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u16 cmd_status;
int retval = 0;
u16 temp_word;
@@ -320,7 +313,6 @@
* command.
*/
writew(temp_word, php_ctlr->creg + CMD);
- dbg("%s: temp_word written %x\n", __FUNCTION__, temp_word);
DBG_LEAVE_ROUTINE
return retval;
@@ -328,7 +320,7 @@
static int hpc_check_cmd_status(struct controller *ctrl)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
u16 cmd_status;
int retval = 0;
@@ -368,7 +360,7 @@
static int hpc_get_attention_status(struct slot *slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u32 slot_reg;
u16 slot_status;
u8 atten_led_state;
@@ -408,7 +400,7 @@
static int hpc_get_power_status(struct slot * slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u32 slot_reg;
u16 slot_status;
u8 slot_state;
@@ -450,7 +442,7 @@
static int hpc_get_latch_status(struct slot *slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u32 slot_reg;
u16 slot_status;
@@ -473,7 +465,7 @@
static int hpc_get_adapter_status(struct slot *slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u32 slot_reg;
u16 slot_status;
u8 card_state;
@@ -496,7 +488,7 @@
static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
DBG_ENTER_ROUTINE
@@ -513,7 +505,7 @@
static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u32 slot_reg;
u16 slot_status, sec_bus_status;
u8 m66_cap, pcix_cap, pi;
@@ -594,7 +586,7 @@
static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u16 sec_bus_status;
u8 pi;
int retval = 0;
@@ -623,7 +615,7 @@
static int hpc_query_power_fault(struct slot * slot)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u32 slot_reg;
u16 slot_status;
u8 pwr_fault_state, status;
@@ -647,7 +639,7 @@
static int hpc_set_attention_status(struct slot *slot, u8 value)
{
- struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u8 slot_cmd = 0;
int rc = 0;
@@ -683,7 +675,7 @@
static void hpc_set_green_led_on(struct slot *slot)
{
- struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u8 slot_cmd;
if (!slot->ctrl->hpc_ctlr_handle) {
@@ -705,7 +697,7 @@
static void hpc_set_green_led_off(struct slot *slot)
{
- struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u8 slot_cmd;
if (!slot->ctrl->hpc_ctlr_handle) {
@@ -727,7 +719,7 @@
static void hpc_set_green_led_blink(struct slot *slot)
{
- struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u8 slot_cmd;
if (!slot->ctrl->hpc_ctlr_handle) {
@@ -754,7 +746,7 @@
int *updown, /* physical_slot_num increament: 1 or -1 */
int *flags)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
DBG_ENTER_ROUTINE
@@ -776,7 +768,7 @@
static void hpc_release_ctlr(struct controller *ctrl)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
struct php_ctlr_state_s *p, *p_prev;
DBG_ENTER_ROUTINE
@@ -796,10 +788,8 @@
}
}
if (php_ctlr->pci_dev) {
- dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__);
iounmap(php_ctlr->creg);
release_mem_region(pci_resource_start(php_ctlr->pci_dev, 0), pci_resource_len(php_ctlr->pci_dev, 0));
- dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__);
php_ctlr->pci_dev = NULL;
}
@@ -828,7 +818,7 @@
static int hpc_power_on_slot(struct slot * slot)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u8 slot_cmd;
int retval = 0;
@@ -859,7 +849,7 @@
static int hpc_slot_enable(struct slot * slot)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u8 slot_cmd;
int retval = 0;
@@ -890,7 +880,7 @@
static int hpc_slot_disable(struct slot * slot)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u8 slot_cmd;
int retval = 0;
@@ -920,51 +910,12 @@
return retval;
}
-static int hpc_enable_all_slots( struct slot *slot )
-{
- int retval = 0;
-
- DBG_ENTER_ROUTINE
-
- if (!slot->ctrl->hpc_ctlr_handle) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- retval = shpc_write_cmd(slot, 0, SET_ENABLE_ALL);
- if (retval) {
- err("%s: Write command failed!\n", __FUNCTION__);
- return -1;
- }
-
- DBG_LEAVE_ROUTINE
-
- return retval;
-}
-
-static int hpc_pwr_on_all_slots(struct slot *slot)
-{
- int retval = 0;
-
- DBG_ENTER_ROUTINE
-
- retval = shpc_write_cmd(slot, 0, SET_PWR_ON_ALL);
-
- if (retval) {
- err("%s: Write command failed!\n", __FUNCTION__);
- return -1;
- }
-
- DBG_LEAVE_ROUTINE
- return retval;
-}
-
static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
{
u8 slot_cmd;
u8 pi;
int retval = 0;
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
DBG_ENTER_ROUTINE
@@ -1089,18 +1040,13 @@
if (!intr_loc)
return IRQ_NONE;
- dbg("%s: shpc_isr proceeds\n", __FUNCTION__);
dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
if(!shpchp_poll_mode) {
/* Mask Global Interrupt Mask - see implementation note on p. 139 */
/* of SHPC spec rev 1.0*/
temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
- dbg("%s: Before masking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
temp_dword |= 0x00000001;
- dbg("%s: After masking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
intr_loc2 = readl(php_ctlr->creg + INTR_LOC);
@@ -1114,11 +1060,7 @@
* Detect bit in Controller SERR-INT register
*/
temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
- dbg("%s: Before clearing CCIP, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
temp_dword &= 0xfffeffff;
- dbg("%s: After clearing CCIP, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
wake_up_interruptible(&ctrl->queue);
}
@@ -1126,11 +1068,7 @@
if ((intr_loc = (intr_loc >> 1)) == 0) {
/* Unmask Global Interrupt Mask */
temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
- dbg("%s: 1-Before unmasking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
temp_dword &= 0xfffffffe;
- dbg("%s: 1-After unmasking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
return IRQ_NONE;
@@ -1140,11 +1078,9 @@
/* To find out which slot has interrupt pending */
if ((intr_loc >> hp_slot) & 0x01) {
temp_dword = readl(php_ctlr->creg + SLOT1 + (4*hp_slot));
- dbg("%s: Slot %x with intr, temp_dword = %x\n",
- __FUNCTION__, hp_slot, temp_dword);
+ dbg("%s: Slot %x with intr, slot register = %x\n",
+ __FUNCTION__, hp_slot, temp_dword);
temp_byte = (temp_dword >> 16) & 0xFF;
- dbg("%s: Slot with intr, temp_byte = %x\n",
- __FUNCTION__, temp_byte);
if ((php_ctlr->switch_change_callback) && (temp_byte & 0x08))
schedule_flag += php_ctlr->switch_change_callback(
hp_slot, php_ctlr->callback_instance_id);
@@ -1160,8 +1096,6 @@
/* Clear all slot events */
temp_dword = 0xe01f3fff;
- dbg("%s: Clearing slot events, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
writel(temp_dword, php_ctlr->creg + SLOT1 + (4*hp_slot));
intr_loc2 = readl(php_ctlr->creg + INTR_LOC);
@@ -1171,11 +1105,7 @@
if (!shpchp_poll_mode) {
/* Unmask Global Interrupt Mask */
temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
- dbg("%s: 2-Before unmasking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
temp_dword &= 0xfffffffe;
- dbg("%s: 2-After unmasking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
}
@@ -1184,7 +1114,7 @@
static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
int retval = 0;
u8 pi;
@@ -1253,7 +1183,7 @@
static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
u16 sec_bus_status;
int retval = 0;
@@ -1367,8 +1297,6 @@
.power_on_slot = hpc_power_on_slot,
.slot_enable = hpc_slot_enable,
.slot_disable = hpc_slot_disable,
- .enable_all_slots = hpc_enable_all_slots,
- .pwr_on_all_slots = hpc_pwr_on_all_slots,
.set_bus_speed_mode = hpc_set_bus_speed_mode,
.set_attention_status = hpc_set_attention_status,
.get_power_status = hpc_get_power_status,
@@ -1391,12 +1319,7 @@
.check_cmd_status = hpc_check_cmd_status,
};
-int shpc_init(struct controller * ctrl,
- struct pci_dev * pdev,
- php_intr_callback_t attention_button_callback,
- php_intr_callback_t switch_change_callback,
- php_intr_callback_t presence_change_callback,
- php_intr_callback_t power_fault_callback)
+int shpc_init(struct controller * ctrl, struct pci_dev * pdev)
{
struct php_ctlr_state_s *php_ctlr, *p;
void *instance_id = ctrl;
@@ -1405,7 +1328,6 @@
static int first = 1;
u32 shpc_cap_offset, shpc_base_offset;
u32 tempdword, slot_reg;
- u16 vendor_id, device_id;
u8 i;
DBG_ENTER_ROUTINE
@@ -1422,21 +1344,8 @@
php_ctlr->pci_dev = pdev; /* save pci_dev in context */
- rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
- dbg("%s: Vendor ID: %x\n",__FUNCTION__, vendor_id);
- if (rc) {
- err("%s: unable to read PCI configuration data\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
-
- rc = pci_read_config_word(pdev, PCI_DEVICE_ID, &device_id);
- dbg("%s: Device ID: %x\n",__FUNCTION__, device_id);
- if (rc) {
- err("%s: unable to read PCI configuration data\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
-
- if ((vendor_id == PCI_VENDOR_ID_AMD) || (device_id == PCI_DEVICE_ID_AMD_GOLAM_7450)) {
+ if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
+ PCI_DEVICE_ID_AMD_GOLAM_7450)) {
shpc_base_offset = 0; /* amd shpc driver doesn't use this; assume 0 */
} else {
if ((shpc_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC)) == 0) {
@@ -1469,7 +1378,8 @@
err("%s : pci_read_config_dword failed\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: offset %d: tempdword %x\n", __FUNCTION__,i, tempdword);
+ dbg("%s: offset %d: value %x\n", __FUNCTION__,i,
+ tempdword);
}
}
@@ -1478,13 +1388,6 @@
first = 0;
}
- dbg("pdev = %p: b:d:f:irq=0x%x:%x:%x:%x\n", pdev, pdev->bus->number, PCI_SLOT(pdev->devfn),
- PCI_FUNC(pdev->devfn), pdev->irq);
- for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++)
- if (pci_resource_len(pdev, rc) > 0)
- dbg("pci resource[%d] start=0x%lx(len=0x%lx), shpc_base_offset %x\n", rc,
- pci_resource_start(pdev, rc), pci_resource_len(pdev, rc), shpc_base_offset);
-
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
pdev->subsystem_device);
@@ -1504,7 +1407,6 @@
goto abort_free_ctlr;
}
dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg);
- dbg("%s: physical addr %p\n", __FUNCTION__, (void*)pci_resource_start(pdev, 0));
init_MUTEX(&ctrl->crit_sect);
/* Setup wait queue */
@@ -1512,13 +1414,10 @@
/* Find the IRQ */
php_ctlr->irq = pdev->irq;
- dbg("HPC interrupt = %d\n", php_ctlr->irq);
-
- /* Save interrupt callback info */
- php_ctlr->attention_button_callback = attention_button_callback;
- php_ctlr->switch_change_callback = switch_change_callback;
- php_ctlr->presence_change_callback = presence_change_callback;
- php_ctlr->power_fault_callback = power_fault_callback;
+ php_ctlr->attention_button_callback = shpchp_handle_attention_button,
+ php_ctlr->switch_change_callback = shpchp_handle_switch_change;
+ php_ctlr->presence_change_callback = shpchp_handle_presence_change;
+ php_ctlr->power_fault_callback = shpchp_handle_power_fault;
php_ctlr->callback_instance_id = instance_id;
/* Return PCI Controller Info */
@@ -1556,7 +1455,6 @@
if (rc) {
info("Can't get msi for the hotplug controller\n");
info("Use INTx for the hotplug controller\n");
- dbg("%s: rc = %x\n", __FUNCTION__, rc);
} else
php_ctlr->irq = pdev->irq;
@@ -1566,9 +1464,11 @@
err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq);
goto abort_free_ctlr;
}
- /* Execute OSHP method here */
}
- dbg("%s: Before adding HPC to HPC list\n", __FUNCTION__);
+ dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __FUNCTION__,
+ pdev->bus->number, PCI_SLOT(pdev->devfn),
+ PCI_FUNC(pdev->devfn), pdev->irq);
+ get_hp_hw_control_from_firmware(pdev);
/* Add this HPC instance into the HPC list */
spin_lock(&list_lock);
@@ -1607,7 +1507,6 @@
dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
}
- dbg("%s: Leaving shpc_init\n", __FUNCTION__);
DBG_LEAVE_ROUTINE
return 0;
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index d867099..b8e95ac 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -27,784 +27,151 @@
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/proc_fs.h>
#include <linux/pci.h>
#include "../pci.h"
#include "shpchp.h"
-#ifndef CONFIG_IA64
-#include "../../../arch/i386/pci/pci.h" /* horrible hack showing how processor dependant we are... */
-#endif
-int shpchp_configure_device (struct controller* ctrl, struct pci_func* func)
+void program_fw_provided_values(struct pci_dev *dev)
{
- unsigned char bus;
- struct pci_bus *child;
- int num;
+ u16 pci_cmd, pci_bctl;
+ struct pci_dev *cdev;
+ struct hotplug_params hpp = {0x8, 0x40, 0, 0}; /* defaults */
- if (func->pci_dev == NULL)
- func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+ /* Program hpp values for this device */
+ if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
+ (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+ (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
+ return;
- /* Still NULL ? Well then scan for it ! */
- if (func->pci_dev == NULL) {
- num = pci_scan_slot(ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function));
- if (num) {
- dbg("%s: subordiante %p number %x\n", __FUNCTION__, ctrl->pci_dev->subordinate,
- ctrl->pci_dev->subordinate->number);
- pci_bus_add_devices(ctrl->pci_dev->subordinate);
- }
-
- func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
- if (func->pci_dev == NULL) {
- dbg("ERROR: pci_dev still null\n");
- return 0;
+ get_hp_params_from_firmware(dev, &hpp);
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp.cache_line_size);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.latency_timer);
+ pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+ if (hpp.enable_serr)
+ pci_cmd |= PCI_COMMAND_SERR;
+ else
+ pci_cmd &= ~PCI_COMMAND_SERR;
+ if (hpp.enable_perr)
+ pci_cmd |= PCI_COMMAND_PARITY;
+ else
+ pci_cmd &= ~PCI_COMMAND_PARITY;
+ pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+
+ /* Program bridge control value and child devices */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
+ hpp.latency_timer);
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
+ if (hpp.enable_serr)
+ pci_bctl |= PCI_BRIDGE_CTL_SERR;
+ else
+ pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
+ if (hpp.enable_perr)
+ pci_bctl |= PCI_BRIDGE_CTL_PARITY;
+ else
+ pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
+ if (dev->subordinate) {
+ list_for_each_entry(cdev, &dev->subordinate->devices,
+ bus_list)
+ program_fw_provided_values(cdev);
}
}
+}
- if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- pci_read_config_byte(func->pci_dev, PCI_SECONDARY_BUS, &bus);
- child = pci_add_new_bus(func->pci_dev->bus, (func->pci_dev), bus);
- pci_do_scan_bus(child);
+int shpchp_configure_device(struct slot *p_slot)
+{
+ struct pci_dev *dev;
+ struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+ int num, fn;
+ dev = pci_find_slot(p_slot->bus, PCI_DEVFN(p_slot->device, 0));
+ if (dev) {
+ err("Device %s already exists at %x:%x, cannot hot-add\n",
+ pci_name(dev), p_slot->bus, p_slot->device);
+ return -EINVAL;
}
+ num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
+ if (num == 0) {
+ err("No new device found\n");
+ return -ENODEV;
+ }
+
+ for (fn = 0; fn < 8; fn++) {
+ if (!(dev = pci_find_slot(p_slot->bus,
+ PCI_DEVFN(p_slot->device, fn))))
+ continue;
+ if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+ err("Cannot hot-add display device %s\n",
+ pci_name(dev));
+ continue;
+ }
+ if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
+ (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
+ /* Find an unused bus number for the new bridge */
+ struct pci_bus *child;
+ unsigned char busnr, start = parent->secondary;
+ unsigned char end = parent->subordinate;
+ for (busnr = start; busnr <= end; busnr++) {
+ if (!pci_find_bus(pci_domain_nr(parent),
+ busnr))
+ break;
+ }
+ if (busnr >= end) {
+ err("No free bus for hot-added bridge\n");
+ continue;
+ }
+ child = pci_add_new_bus(parent, dev, busnr);
+ if (!child) {
+ err("Cannot add new bus for %s\n",
+ pci_name(dev));
+ continue;
+ }
+ child->subordinate = pci_do_scan_bus(child);
+ pci_bus_size_bridges(child);
+ }
+ program_fw_provided_values(dev);
+ }
+
+ pci_bus_assign_resources(parent);
+ pci_bus_add_devices(parent);
+ pci_enable_bridges(parent);
return 0;
}
-
-int shpchp_unconfigure_device(struct pci_func* func)
+int shpchp_unconfigure_device(struct slot *p_slot)
{
int rc = 0;
int j;
+ u8 bctl = 0;
- dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus,
- func->device, func->function);
+ dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, p_slot->device);
for (j=0; j<8 ; j++) {
- struct pci_dev* temp = pci_find_slot(func->bus,
- (func->device << 3) | j);
- if (temp) {
- pci_remove_bus_device(temp);
+ struct pci_dev* temp = pci_find_slot(p_slot->bus,
+ (p_slot->device << 3) | j);
+ if (!temp)
+ continue;
+ if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+ err("Cannot remove display device %s\n",
+ pci_name(temp));
+ continue;
}
+ if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
+ if (bctl & PCI_BRIDGE_CTL_VGA) {
+ err("Cannot remove display device %s\n",
+ pci_name(temp));
+ continue;
+ }
+ }
+ pci_remove_bus_device(temp);
}
return rc;
}
-/*
- * shpchp_set_irq
- *
- * @bus_num: bus number of PCI device
- * @dev_num: device number of PCI device
- * @slot: pointer to u8 where slot number will be returned
- */
-int shpchp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
-{
-#if defined(CONFIG_X86) && !defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_64)
- int rc;
- u16 temp_word;
- struct pci_dev fakedev;
- struct pci_bus fakebus;
-
- fakedev.devfn = dev_num << 3;
- fakedev.bus = &fakebus;
- fakebus.number = bus_num;
- dbg("%s: dev %d, bus %d, pin %d, num %d\n",
- __FUNCTION__, dev_num, bus_num, int_pin, irq_num);
- rc = pcibios_set_irq_routing(&fakedev, int_pin - 0x0a, irq_num);
- dbg("%s: rc %d\n", __FUNCTION__, rc);
- if (!rc)
- return !rc;
-
- /* set the Edge Level Control Register (ELCR) */
- temp_word = inb(0x4d0);
- temp_word |= inb(0x4d1) << 8;
-
- temp_word |= 0x01 << irq_num;
-
- /* This should only be for x86 as it sets the Edge Level Control Register */
- outb((u8) (temp_word & 0xFF), 0x4d0);
- outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
-#endif
- return 0;
-}
-
-/* More PCI configuration routines; this time centered around hotplug controller */
-
-
-/*
- * shpchp_save_config
- *
- * Reads configuration for all slots in a PCI bus and saves info.
- *
- * Note: For non-hot plug busses, the slot # saved is the device #
- *
- * returns 0 if success
- */
-int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num)
-{
- int rc;
- u8 class_code;
- u8 header_type;
- u32 ID;
- u8 secondary_bus;
- struct pci_func *new_slot;
- int sub_bus;
- int FirstSupported;
- int LastSupported;
- int max_functions;
- int function;
- u8 DevError;
- int device = 0;
- int cloop = 0;
- int stop_it;
- int index;
- int is_hot_plug = num_ctlr_slots || first_device_num;
- struct pci_bus lpci_bus, *pci_bus;
-
- dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
- num_ctlr_slots, first_device_num);
-
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
-
- dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
- num_ctlr_slots, first_device_num);
-
- /* Decide which slots are supported */
- if (is_hot_plug) {
- /*********************************
- * is_hot_plug is the slot mask
- *********************************/
- FirstSupported = first_device_num;
- LastSupported = FirstSupported + num_ctlr_slots - 1;
- } else {
- FirstSupported = 0;
- LastSupported = 0x1F;
- }
-
- dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported,
- LastSupported);
-
- /* Save PCI configuration space for all devices in supported slots */
- pci_bus->number = busnumber;
- for (device = FirstSupported; device <= LastSupported; device++) {
- ID = 0xFFFFFFFF;
- rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
- PCI_VENDOR_ID, &ID);
-
- if (ID != 0xFFFFFFFF) { /* device in slot */
- rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
- 0x0B, &class_code);
- if (rc)
- return rc;
-
- rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
- PCI_HEADER_TYPE, &header_type);
- if (rc)
- return rc;
-
- dbg("class_code = %x, header_type = %x\n", class_code, header_type);
-
- /* If multi-function device, set max_functions to 8 */
- if (header_type & 0x80)
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- DevError = 0;
-
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* P-P Bridge */
- /* Recurse the subordinate bus
- * get the subordinate bus number
- */
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- PCI_SECONDARY_BUS, &secondary_bus);
- if (rc) {
- return rc;
- } else {
- sub_bus = (int) secondary_bus;
-
- /* Save secondary bus cfg spc with this recursive call. */
- rc = shpchp_save_config(ctrl, sub_bus, 0, 0);
- if (rc)
- return rc;
- }
- }
-
- index = 0;
- new_slot = shpchp_slot_find(busnumber, device, index++);
-
- dbg("new_slot = %p\n", new_slot);
-
- while (new_slot && (new_slot->function != (u8) function)) {
- new_slot = shpchp_slot_find(busnumber, device, index++);
- dbg("new_slot = %p\n", new_slot);
- }
- if (!new_slot) {
- /* Setup slot structure. */
- new_slot = shpchp_slot_create(busnumber);
- dbg("new_slot = %p\n", new_slot);
-
- if (new_slot == NULL)
- return(1);
- }
-
- new_slot->bus = (u8) busnumber;
- new_slot->device = (u8) device;
- new_slot->function = (u8) function;
- new_slot->is_a_board = 1;
- new_slot->switch_save = 0x10;
- new_slot->pwr_save = 1;
- /* In case of unsupported board */
- new_slot->status = DevError;
- new_slot->pci_dev = pci_find_slot(new_slot->bus,
- (new_slot->device << 3) | new_slot->function);
- dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev);
-
- for (cloop = 0; cloop < 0x20; cloop++) {
- rc = pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(device, function),
- cloop << 2,
- (u32 *) &(new_slot->config_space [cloop]));
- /* dbg("new_slot->config_space[%x] = %x\n",
- cloop, new_slot->config_space[cloop]); */
- if (rc)
- return rc;
- }
-
- function++;
-
- stop_it = 0;
-
- /* this loop skips to the next present function
- * reading in Class Code and Header type.
- */
-
- while ((function < max_functions)&&(!stop_it)) {
- rc = pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(device, function),
- PCI_VENDOR_ID, &ID);
-
- if (ID == 0xFFFFFFFF) { /* nothing there. */
- function++;
- dbg("Nothing there\n");
- } else { /* Something there */
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- 0x0B, &class_code);
- if (rc)
- return rc;
-
- rc = pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(device, function),
- PCI_HEADER_TYPE, &header_type);
- if (rc)
- return rc;
-
- dbg("class_code = %x, header_type = %x\n",
- class_code, header_type);
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- /* End of IF (device in slot?) */
- } else if (is_hot_plug) {
- /* Setup slot structure with entry for empty slot */
- new_slot = shpchp_slot_create(busnumber);
-
- if (new_slot == NULL) {
- return(1);
- }
- dbg("new_slot = %p\n", new_slot);
-
- new_slot->bus = (u8) busnumber;
- new_slot->device = (u8) device;
- new_slot->function = 0;
- new_slot->is_a_board = 0;
- new_slot->presence_save = 0;
- new_slot->switch_save = 0;
- }
- } /* End of FOR loop */
-
- return(0);
-}
-
-
-/*
- * shpchp_save_slot_config
- *
- * Saves configuration info for all PCI devices in a given slot
- * including subordinate busses.
- *
- * returns 0 if success
- */
-int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot)
-{
- int rc;
- u8 class_code;
- u8 header_type;
- u32 ID;
- u8 secondary_bus;
- int sub_bus;
- int max_functions;
- int function;
- int cloop = 0;
- int stop_it;
- struct pci_bus lpci_bus, *pci_bus;
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = new_slot->bus;
-
- ID = 0xFFFFFFFF;
-
- pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0),
- PCI_VENDOR_ID, &ID);
-
- if (ID != 0xFFFFFFFF) { /* device in slot */
- pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
- 0x0B, &class_code);
-
- pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
- PCI_HEADER_TYPE, &header_type);
-
- if (header_type & 0x80) /* Multi-function device */
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
- /* Recurse the subordinate bus */
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_SECONDARY_BUS, &secondary_bus);
-
- sub_bus = (int) secondary_bus;
-
- /* Save the config headers for the secondary bus. */
- rc = shpchp_save_config(ctrl, sub_bus, 0, 0);
-
- if (rc)
- return rc;
-
- } /* End of IF */
-
- new_slot->status = 0;
-
- for (cloop = 0; cloop < 0x20; cloop++) {
- pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- cloop << 2,
- (u32 *) &(new_slot->config_space [cloop]));
- }
-
- function++;
-
- stop_it = 0;
-
- /* this loop skips to the next present function
- * reading in the Class Code and the Header type.
- */
-
- while ((function < max_functions) && (!stop_it)) {
- pci_bus_read_config_dword(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_VENDOR_ID, &ID);
-
- if (ID == 0xFFFFFFFF) { /* nothing there. */
- function++;
- } else { /* Something there */
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- 0x0B, &class_code);
-
- pci_bus_read_config_byte(pci_bus,
- PCI_DEVFN(new_slot->device, function),
- PCI_HEADER_TYPE, &header_type);
-
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- } /* End of IF (device in slot?) */
- else {
- return 2;
- }
-
- return 0;
-}
-
-
-/*
- * shpchp_save_used_resources
- *
- * Stores used resource information for existing boards. this is
- * for boards that were in the system when this driver was loaded.
- * this function is for hot plug ADD
- *
- * returns 0 if success
- * if disable == 1(DISABLE_CARD),
- * it loops for all functions of the slot and disables them.
- * else, it just get resources of the function and return.
- */
-int shpchp_save_used_resources(struct controller *ctrl, struct pci_func *func, int disable)
-{
- u8 cloop;
- u8 header_type;
- u8 secondary_bus;
- u8 temp_byte;
- u16 command;
- u16 save_command;
- u16 w_base, w_length;
- u32 temp_register;
- u32 save_base;
- u32 base, length;
- u64 base64 = 0;
- int index = 0;
- unsigned int devfn;
- struct pci_resource *mem_node = NULL;
- struct pci_resource *p_mem_node = NULL;
- struct pci_resource *t_mem_node;
- struct pci_resource *io_node;
- struct pci_resource *bus_node;
- struct pci_bus lpci_bus, *pci_bus;
- memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
-
- if (disable)
- func = shpchp_slot_find(func->bus, func->device, index++);
-
- while ((func != NULL) && func->is_a_board) {
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- /* Save the command register */
- pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
-
- if (disable) {
- /* disable card */
- command = 0x00;
- pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
- }
-
- /* Check for Bridge */
- pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
-
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
- dbg("Save_used_res of PCI bridge b:d=0x%x:%x, sc=0x%x\n",
- func->bus, func->device, save_command);
- if (disable) {
- /* Clear Bridge Control Register */
- command = 0x00;
- pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
- }
-
- pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
- pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte);
-
- bus_node = kmalloc(sizeof(struct pci_resource),
- GFP_KERNEL);
- if (!bus_node)
- return -ENOMEM;
-
- bus_node->base = (ulong)secondary_bus;
- bus_node->length = (ulong)(temp_byte - secondary_bus + 1);
-
- bus_node->next = func->bus_head;
- func->bus_head = bus_node;
-
- /* Save IO base and Limit registers */
- pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &temp_byte);
- base = temp_byte;
- pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &temp_byte);
- length = temp_byte;
-
- if ((base <= length) && (!disable || (save_command & PCI_COMMAND_IO))) {
- io_node = kmalloc(sizeof(struct pci_resource),
- GFP_KERNEL);
- if (!io_node)
- return -ENOMEM;
-
- io_node->base = (ulong)(base & PCI_IO_RANGE_MASK) << 8;
- io_node->length = (ulong)(length - base + 0x10) << 8;
-
- io_node->next = func->io_head;
- func->io_head = io_node;
- }
-
- /* Save memory base and Limit registers */
- pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
- pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
-
- if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) {
- mem_node = kmalloc(sizeof(struct pci_resource),
- GFP_KERNEL);
- if (!mem_node)
- return -ENOMEM;
-
- mem_node->base = (ulong)w_base << 16;
- mem_node->length = (ulong)(w_length - w_base + 0x10) << 16;
-
- mem_node->next = func->mem_head;
- func->mem_head = mem_node;
- }
- /* Save prefetchable memory base and Limit registers */
- pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
- pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
-
- if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) {
- p_mem_node = kmalloc(sizeof(struct pci_resource),
- GFP_KERNEL);
- if (!p_mem_node)
- return -ENOMEM;
-
- p_mem_node->base = (ulong)w_base << 16;
- p_mem_node->length = (ulong)(w_length - w_base + 0x10) << 16;
-
- p_mem_node->next = func->p_mem_head;
- func->p_mem_head = p_mem_node;
- }
- } else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
- dbg("Save_used_res of PCI adapter b:d=0x%x:%x, sc=0x%x\n",
- func->bus, func->device, save_command);
-
- /* Figure out IO and memory base lengths */
- for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) {
- pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
-
- temp_register = 0xFFFFFFFF;
- pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
- pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register);
-
- if (!disable)
- pci_bus_write_config_dword(pci_bus, devfn, cloop, save_base);
-
- if (!temp_register)
- continue;
-
- base = temp_register;
-
- if ((base & PCI_BASE_ADDRESS_SPACE_IO) &&
- (!disable || (save_command & PCI_COMMAND_IO))) {
- /* IO base */
- /* set temp_register = amount of IO space requested */
- base = base & 0xFFFFFFFCL;
- base = (~base) + 1;
-
- io_node = kmalloc(sizeof (struct pci_resource),
- GFP_KERNEL);
- if (!io_node)
- return -ENOMEM;
-
- io_node->base = (ulong)save_base & PCI_BASE_ADDRESS_IO_MASK;
- io_node->length = (ulong)base;
- dbg("sur adapter: IO bar=0x%x(length=0x%x)\n",
- io_node->base, io_node->length);
-
- io_node->next = func->io_head;
- func->io_head = io_node;
- } else { /* map Memory */
- int prefetchable = 1;
- /* struct pci_resources **res_node; */
- char *res_type_str = "PMEM";
- u32 temp_register2;
-
- t_mem_node = kmalloc(sizeof (struct pci_resource),
- GFP_KERNEL);
- if (!t_mem_node)
- return -ENOMEM;
-
- if (!(base & PCI_BASE_ADDRESS_MEM_PREFETCH) &&
- (!disable || (save_command & PCI_COMMAND_MEMORY))) {
- prefetchable = 0;
- mem_node = t_mem_node;
- res_type_str++;
- } else
- p_mem_node = t_mem_node;
-
- base = base & 0xFFFFFFF0L;
- base = (~base) + 1;
-
- switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) {
- case PCI_BASE_ADDRESS_MEM_TYPE_32:
- if (prefetchable) {
- p_mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK;
- p_mem_node->length = (ulong)base;
- dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n",
- res_type_str,
- p_mem_node->base,
- p_mem_node->length);
-
- p_mem_node->next = func->p_mem_head;
- func->p_mem_head = p_mem_node;
- } else {
- mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK;
- mem_node->length = (ulong)base;
- dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n",
- res_type_str,
- mem_node->base,
- mem_node->length);
-
- mem_node->next = func->mem_head;
- func->mem_head = mem_node;
- }
- break;
- case PCI_BASE_ADDRESS_MEM_TYPE_64:
- pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2);
- base64 = temp_register2;
- base64 = (base64 << 32) | save_base;
-
- if (temp_register2) {
- dbg("sur adapter: 64 %s high dword of base64(0x%x:%x) masked to 0\n",
- res_type_str, temp_register2, (u32)base64);
- base64 &= 0x00000000FFFFFFFFL;
- }
-
- if (prefetchable) {
- p_mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK;
- p_mem_node->length = base;
- dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n",
- res_type_str,
- p_mem_node->base,
- p_mem_node->length);
-
- p_mem_node->next = func->p_mem_head;
- func->p_mem_head = p_mem_node;
- } else {
- mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK;
- mem_node->length = base;
- dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n",
- res_type_str,
- mem_node->base,
- mem_node->length);
-
- mem_node->next = func->mem_head;
- func->mem_head = mem_node;
- }
- cloop += 4;
- break;
- default:
- dbg("asur: reserved BAR type=0x%x\n",
- temp_register);
- break;
- }
- }
- } /* End of base register loop */
- } else { /* Some other unknown header type */
- dbg("Save_used_res of PCI unknown type b:d=0x%x:%x. skip.\n",
- func->bus, func->device);
- }
-
- /* find the next device in this slot */
- if (!disable)
- break;
- func = shpchp_slot_find(func->bus, func->device, index++);
- }
-
- return 0;
-}
-
-/**
- * kfree_resource_list: release memory of all list members
- * @res: resource list to free
- */
-static inline void
-return_resource_list(struct pci_resource **func, struct pci_resource **res)
-{
- struct pci_resource *node;
- struct pci_resource *t_node;
-
- node = *func;
- *func = NULL;
- while (node) {
- t_node = node->next;
- return_resource(res, node);
- node = t_node;
- }
-}
-
-/*
- * shpchp_return_board_resources
- *
- * this routine returns all resources allocated to a board to
- * the available pool.
- *
- * returns 0 if success
- */
-int shpchp_return_board_resources(struct pci_func * func,
- struct resource_lists * resources)
-{
- int rc;
- dbg("%s\n", __FUNCTION__);
-
- if (!func)
- return 1;
-
- return_resource_list(&(func->io_head),&(resources->io_head));
- return_resource_list(&(func->mem_head),&(resources->mem_head));
- return_resource_list(&(func->p_mem_head),&(resources->p_mem_head));
- return_resource_list(&(func->bus_head),&(resources->bus_head));
-
- rc = shpchp_resource_sort_and_combine(&(resources->mem_head));
- rc |= shpchp_resource_sort_and_combine(&(resources->p_mem_head));
- rc |= shpchp_resource_sort_and_combine(&(resources->io_head));
- rc |= shpchp_resource_sort_and_combine(&(resources->bus_head));
-
- return rc;
-}
-
-/**
- * kfree_resource_list: release memory of all list members
- * @res: resource list to free
- */
-static inline void
-kfree_resource_list(struct pci_resource **r)
-{
- struct pci_resource *res, *tres;
-
- res = *r;
- *r = NULL;
-
- while (res) {
- tres = res;
- res = res->next;
- kfree(tres);
- }
-}
-
-/**
- * shpchp_destroy_resource_list: put node back in the resource list
- * @resources: list to put nodes back
- */
-void shpchp_destroy_resource_list(struct resource_lists *resources)
-{
- kfree_resource_list(&(resources->io_head));
- kfree_resource_list(&(resources->mem_head));
- kfree_resource_list(&(resources->p_mem_head));
- kfree_resource_list(&(resources->bus_head));
-}
-
-/**
- * shpchp_destroy_board_resources: put node back in the resource list
- * @resources: list to put nodes back
- */
-void shpchp_destroy_board_resources(struct pci_func * func)
-{
- kfree_resource_list(&(func->io_head));
- kfree_resource_list(&(func->mem_head));
- kfree_resource_list(&(func->p_mem_head));
- kfree_resource_list(&(func->bus_head));
-}
diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c
index c9445eb..f5cfbf2 100644
--- a/drivers/pci/hotplug/shpchp_sysfs.c
+++ b/drivers/pci/hotplug/shpchp_sysfs.c
@@ -26,12 +26,9 @@
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/workqueue.h>
#include <linux/pci.h>
#include "shpchp.h"
@@ -40,104 +37,60 @@
static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, char *buf)
{
- struct pci_dev *pci_dev;
- struct controller *ctrl;
+ struct pci_dev *pdev;
char * out = buf;
- int index;
- struct pci_resource *res;
+ int index, busnr;
+ struct resource *res;
+ struct pci_bus *bus;
- pci_dev = container_of (dev, struct pci_dev, dev);
- ctrl = pci_get_drvdata(pci_dev);
+ pdev = container_of (dev, struct pci_dev, dev);
+ bus = pdev->subordinate;
out += sprintf(buf, "Free resources: memory\n");
- index = 11;
- res = ctrl->mem_head;
- while (res && index--) {
- out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
- res = res->next;
+ for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
+ res = bus->resource[index];
+ if (res && (res->flags & IORESOURCE_MEM) &&
+ !(res->flags & IORESOURCE_PREFETCH)) {
+ out += sprintf(out, "start = %8.8lx, length = %8.8lx\n",
+ res->start, (res->end - res->start));
+ }
}
out += sprintf(out, "Free resources: prefetchable memory\n");
- index = 11;
- res = ctrl->p_mem_head;
- while (res && index--) {
- out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
- res = res->next;
+ for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
+ res = bus->resource[index];
+ if (res && (res->flags & IORESOURCE_MEM) &&
+ (res->flags & IORESOURCE_PREFETCH)) {
+ out += sprintf(out, "start = %8.8lx, length = %8.8lx\n",
+ res->start, (res->end - res->start));
+ }
}
out += sprintf(out, "Free resources: IO\n");
- index = 11;
- res = ctrl->io_head;
- while (res && index--) {
- out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
- res = res->next;
+ for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
+ res = bus->resource[index];
+ if (res && (res->flags & IORESOURCE_IO)) {
+ out += sprintf(out, "start = %8.8lx, length = %8.8lx\n",
+ res->start, (res->end - res->start));
+ }
}
out += sprintf(out, "Free resources: bus numbers\n");
- index = 11;
- res = ctrl->bus_head;
- while (res && index--) {
- out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
- res = res->next;
+ for (busnr = bus->secondary; busnr <= bus->subordinate; busnr++) {
+ if (!pci_find_bus(pci_domain_nr(bus), busnr))
+ break;
}
+ if (busnr < bus->subordinate)
+ out += sprintf(out, "start = %8.8x, length = %8.8x\n",
+ busnr, (bus->subordinate - busnr));
return out - buf;
}
static DEVICE_ATTR (ctrl, S_IRUGO, show_ctrl, NULL);
-static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pci_dev *pci_dev;
- struct controller *ctrl;
- char * out = buf;
- int index;
- struct pci_resource *res;
- struct pci_func *new_slot;
- struct slot *slot;
-
- pci_dev = container_of (dev, struct pci_dev, dev);
- ctrl = pci_get_drvdata(pci_dev);
-
- slot=ctrl->slot;
-
- while (slot) {
- new_slot = shpchp_slot_find(slot->bus, slot->device, 0);
- if (!new_slot)
- break;
- out += sprintf(out, "assigned resources: memory\n");
- index = 11;
- res = new_slot->mem_head;
- while (res && index--) {
- out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
- res = res->next;
- }
- out += sprintf(out, "assigned resources: prefetchable memory\n");
- index = 11;
- res = new_slot->p_mem_head;
- while (res && index--) {
- out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
- res = res->next;
- }
- out += sprintf(out, "assigned resources: IO\n");
- index = 11;
- res = new_slot->io_head;
- while (res && index--) {
- out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
- res = res->next;
- }
- out += sprintf(out, "assigned resources: bus numbers\n");
- index = 11;
- res = new_slot->bus_head;
- while (res && index--) {
- out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
- res = res->next;
- }
- slot=slot->next;
- }
-
- return out - buf;
-}
-static DEVICE_ATTR (dev, S_IRUGO, show_dev, NULL);
-
void shpchp_create_ctrl_files (struct controller *ctrl)
{
device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl);
- device_create_file (&ctrl->pci_dev->dev, &dev_attr_dev);
+}
+
+void shpchp_remove_ctrl_files(struct controller *ctrl)
+{
+ device_remove_file(&ctrl->pci_dev->dev, &dev_attr_ctrl);
}
diff --git a/drivers/pci/hotplug/shpchprm.h b/drivers/pci/hotplug/shpchprm.h
deleted file mode 100644
index 057b192..0000000
--- a/drivers/pci/hotplug/shpchprm.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * SHPCHPRM : SHPCHP Resource Manager for ACPI/non-ACPI platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
- *
- */
-
-#ifndef _SHPCHPRM_H_
-#define _SHPCHPRM_H_
-
-#ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
-#include "shpchprm_legacy.h"
-#else
-#include "shpchprm_nonacpi.h"
-#endif
-
-int shpchprm_init(enum php_ctlr_type ct);
-void shpchprm_cleanup(void);
-int shpchprm_print_pirt(void);
-int shpchprm_find_available_resources(struct controller *ctrl);
-int shpchprm_set_hpp(struct controller *ctrl, struct pci_func *func, u8 card_type);
-void shpchprm_enable_card(struct controller *ctrl, struct pci_func *func, u8 card_type);
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum);
-
-#ifdef DEBUG
-#define RES_CHECK(this, bits) \
- { if (((this) & (bits - 1))) \
- printk("%s:%d ERR: potential res loss!\n", __FUNCTION__, __LINE__); }
-#else
-#define RES_CHECK(this, bits)
-#endif
-
-#endif /* _SHPCHPRM_H_ */
diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c
index d37b316..17145e5 100644
--- a/drivers/pci/hotplug/shpchprm_acpi.c
+++ b/drivers/pci/hotplug/shpchprm_acpi.c
@@ -24,91 +24,19 @@
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/efi.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#ifdef CONFIG_IA64
-#include <asm/iosapic.h>
-#endif
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/actypes.h>
#include "shpchp.h"
-#include "shpchprm.h"
-
-#define PCI_MAX_BUS 0x100
-#define ACPI_STA_DEVICE_PRESENT 0x01
#define METHOD_NAME__SUN "_SUN"
#define METHOD_NAME__HPP "_HPP"
#define METHOD_NAME_OSHP "OSHP"
-#define PHP_RES_BUS 0xA0
-#define PHP_RES_IO 0xA1
-#define PHP_RES_MEM 0xA2
-#define PHP_RES_PMEM 0xA3
-
-#define BRIDGE_TYPE_P2P 0x00
-#define BRIDGE_TYPE_HOST 0x01
-
-/* this should go to drivers/acpi/include/ */
-struct acpi__hpp {
- u8 cache_line_size;
- u8 latency_timer;
- u8 enable_serr;
- u8 enable_perr;
-};
-
-struct acpi_php_slot {
- struct acpi_php_slot *next;
- struct acpi_bridge *bridge;
- acpi_handle handle;
- int seg;
- int bus;
- int dev;
- int fun;
- u32 sun;
- struct pci_resource *mem_head;
- struct pci_resource *p_mem_head;
- struct pci_resource *io_head;
- struct pci_resource *bus_head;
- void *slot_ops; /* _STA, _EJx, etc */
- struct slot *slot;
-}; /* per func */
-
-struct acpi_bridge {
- struct acpi_bridge *parent;
- struct acpi_bridge *next;
- struct acpi_bridge *child;
- acpi_handle handle;
- int seg;
- int pbus; /* pdev->bus->number */
- int pdevice; /* PCI_SLOT(pdev->devfn) */
- int pfunction; /* PCI_DEVFN(pdev->devfn) */
- int bus; /* pdev->subordinate->number */
- struct acpi__hpp *_hpp;
- struct acpi_php_slot *slots;
- struct pci_resource *tmem_head; /* total from crs */
- struct pci_resource *tp_mem_head; /* total from crs */
- struct pci_resource *tio_head; /* total from crs */
- struct pci_resource *tbus_head; /* total from crs */
- struct pci_resource *mem_head; /* available */
- struct pci_resource *p_mem_head; /* available */
- struct pci_resource *io_head; /* available */
- struct pci_resource *bus_head; /* available */
- int scanned;
- int type;
-};
-
-static struct acpi_bridge *acpi_bridges_head;
-
static u8 * acpi_path_name( acpi_handle handle)
{
acpi_status status;
@@ -124,82 +52,43 @@
return path_name;
}
-static void acpi_get__hpp ( struct acpi_bridge *ab);
-static void acpi_run_oshp ( struct acpi_bridge *ab);
-
-static int acpi_add_slot_to_php_slots(
- struct acpi_bridge *ab,
- int bus_num,
- acpi_handle handle,
- u32 adr,
- u32 sun
- )
-{
- struct acpi_php_slot *aps;
- static long samesun = -1;
-
- aps = (struct acpi_php_slot *) kmalloc (sizeof(struct acpi_php_slot), GFP_KERNEL);
- if (!aps) {
- err ("acpi_shpchprm: alloc for aps fail\n");
- return -1;
- }
- memset(aps, 0, sizeof(struct acpi_php_slot));
-
- aps->handle = handle;
- aps->bus = bus_num;
- aps->dev = (adr >> 16) & 0xffff;
- aps->fun = adr & 0xffff;
- aps->sun = sun;
-
- aps->next = ab->slots; /* cling to the bridge */
- aps->bridge = ab;
- ab->slots = aps;
-
- ab->scanned += 1;
- if (!ab->_hpp)
- acpi_get__hpp(ab);
-
- acpi_run_oshp(ab);
-
- if (sun != samesun) {
- info("acpi_shpchprm: Slot sun(%x) at s:b:d:f=0x%02x:%02x:%02x:%02x\n", aps->sun, ab->seg,
- aps->bus, aps->dev, aps->fun);
- samesun = sun;
- }
- return 0;
-}
-
-static void acpi_get__hpp ( struct acpi_bridge *ab)
+static acpi_status
+acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
{
acpi_status status;
u8 nui[4];
struct acpi_buffer ret_buf = { 0, NULL};
union acpi_object *ext_obj, *package;
- u8 *path_name = acpi_path_name(ab->handle);
+ u8 *path_name = acpi_path_name(handle);
int i, len = 0;
/* get _hpp */
- status = acpi_evaluate_object(ab->handle, METHOD_NAME__HPP, NULL, &ret_buf);
+ status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
switch (status) {
case AE_BUFFER_OVERFLOW:
ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
if (!ret_buf.pointer) {
- err ("acpi_shpchprm:%s alloc for _HPP fail\n", path_name);
- return;
+ err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
+ path_name);
+ return AE_NO_MEMORY;
}
- status = acpi_evaluate_object(ab->handle, METHOD_NAME__HPP, NULL, &ret_buf);
+ status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
+ NULL, &ret_buf);
if (ACPI_SUCCESS(status))
break;
default:
if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm:%s _HPP fail=0x%x\n", path_name, status);
- return;
+ dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
+ path_name, status);
+ return status;
}
}
ext_obj = (union acpi_object *) ret_buf.pointer;
if (ext_obj->type != ACPI_TYPE_PACKAGE) {
- err ("acpi_shpchprm:%s _HPP obj not a package\n", path_name);
+ err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
+ path_name);
+ status = AE_ERROR;
goto free_and_return;
}
@@ -212,1353 +101,41 @@
nui[i] = (u8)ext_obj->integer.value;
break;
default:
- err ("acpi_shpchprm:%s _HPP obj type incorrect\n", path_name);
+ err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
+ path_name);
+ status = AE_ERROR;
goto free_and_return;
}
}
- ab->_hpp = kmalloc (sizeof (struct acpi__hpp), GFP_KERNEL);
- if (!ab->_hpp) {
- err ("acpi_shpchprm:%s alloc for _HPP failed\n", path_name);
- goto free_and_return;
- }
- memset(ab->_hpp, 0, sizeof(struct acpi__hpp));
+ hpp->cache_line_size = nui[0];
+ hpp->latency_timer = nui[1];
+ hpp->enable_serr = nui[2];
+ hpp->enable_perr = nui[3];
- ab->_hpp->cache_line_size = nui[0];
- ab->_hpp->latency_timer = nui[1];
- ab->_hpp->enable_serr = nui[2];
- ab->_hpp->enable_perr = nui[3];
-
- dbg(" _HPP: cache_line_size=0x%x\n", ab->_hpp->cache_line_size);
- dbg(" _HPP: latency timer =0x%x\n", ab->_hpp->latency_timer);
- dbg(" _HPP: enable SERR =0x%x\n", ab->_hpp->enable_serr);
- dbg(" _HPP: enable PERR =0x%x\n", ab->_hpp->enable_perr);
+ dbg(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
+ dbg(" _HPP: latency timer =0x%x\n", hpp->latency_timer);
+ dbg(" _HPP: enable SERR =0x%x\n", hpp->enable_serr);
+ dbg(" _HPP: enable PERR =0x%x\n", hpp->enable_perr);
free_and_return:
kfree(ret_buf.pointer);
+ return status;
}
-static void acpi_run_oshp ( struct acpi_bridge *ab)
+static void acpi_run_oshp(acpi_handle handle)
{
acpi_status status;
- u8 *path_name = acpi_path_name(ab->handle);
+ u8 *path_name = acpi_path_name(handle);
/* run OSHP */
- status = acpi_evaluate_object(ab->handle, METHOD_NAME_OSHP, NULL, NULL);
+ status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
if (ACPI_FAILURE(status)) {
- err("acpi_pciehprm:%s OSHP fails=0x%x\n", path_name, status);
- } else
- dbg("acpi_pciehprm:%s OSHP passes =0x%x\n", path_name, status);
- return;
-}
-
-static acpi_status acpi_evaluate_crs(
- acpi_handle handle,
- struct acpi_resource **retbuf
- )
-{
- acpi_status status;
- struct acpi_buffer crsbuf;
- u8 *path_name = acpi_path_name(handle);
-
- crsbuf.length = 0;
- crsbuf.pointer = NULL;
-
- status = acpi_get_current_resources (handle, &crsbuf);
-
- switch (status) {
- case AE_BUFFER_OVERFLOW:
- break; /* found */
- case AE_NOT_FOUND:
- dbg("acpi_shpchprm:%s _CRS not found\n", path_name);
- return status;
- default:
- err ("acpi_shpchprm:%s _CRS fail=0x%x\n", path_name, status);
- return status;
- }
-
- crsbuf.pointer = kmalloc (crsbuf.length, GFP_KERNEL);
- if (!crsbuf.pointer) {
- err ("acpi_shpchprm: alloc %ld bytes for %s _CRS fail\n", (ulong)crsbuf.length, path_name);
- return AE_NO_MEMORY;
- }
-
- status = acpi_get_current_resources (handle, &crsbuf);
- if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm: %s _CRS fail=0x%x.\n", path_name, status);
- kfree(crsbuf.pointer);
- return status;
- }
-
- *retbuf = crsbuf.pointer;
-
- return status;
-}
-
-static void free_pci_resource ( struct pci_resource *aprh)
-{
- struct pci_resource *res, *next;
-
- for (res = aprh; res; res = next) {
- next = res->next;
- kfree(res);
- }
-}
-
-static void print_pci_resource ( struct pci_resource *aprh)
-{
- struct pci_resource *res;
-
- for (res = aprh; res; res = res->next)
- dbg(" base= 0x%x length= 0x%x\n", res->base, res->length);
-}
-
-static void print_slot_resources( struct acpi_php_slot *aps)
-{
- if (aps->bus_head) {
- dbg(" BUS Resources:\n");
- print_pci_resource (aps->bus_head);
- }
-
- if (aps->io_head) {
- dbg(" IO Resources:\n");
- print_pci_resource (aps->io_head);
- }
-
- if (aps->mem_head) {
- dbg(" MEM Resources:\n");
- print_pci_resource (aps->mem_head);
- }
-
- if (aps->p_mem_head) {
- dbg(" PMEM Resources:\n");
- print_pci_resource (aps->p_mem_head);
- }
-}
-
-static void print_pci_resources( struct acpi_bridge *ab)
-{
- if (ab->tbus_head) {
- dbg(" Total BUS Resources:\n");
- print_pci_resource (ab->tbus_head);
- }
- if (ab->bus_head) {
- dbg(" BUS Resources:\n");
- print_pci_resource (ab->bus_head);
- }
-
- if (ab->tio_head) {
- dbg(" Total IO Resources:\n");
- print_pci_resource (ab->tio_head);
- }
- if (ab->io_head) {
- dbg(" IO Resources:\n");
- print_pci_resource (ab->io_head);
- }
-
- if (ab->tmem_head) {
- dbg(" Total MEM Resources:\n");
- print_pci_resource (ab->tmem_head);
- }
- if (ab->mem_head) {
- dbg(" MEM Resources:\n");
- print_pci_resource (ab->mem_head);
- }
-
- if (ab->tp_mem_head) {
- dbg(" Total PMEM Resources:\n");
- print_pci_resource (ab->tp_mem_head);
- }
- if (ab->p_mem_head) {
- dbg(" PMEM Resources:\n");
- print_pci_resource (ab->p_mem_head);
- }
- if (ab->_hpp) {
- dbg(" _HPP: cache_line_size=0x%x\n", ab->_hpp->cache_line_size);
- dbg(" _HPP: latency timer =0x%x\n", ab->_hpp->latency_timer);
- dbg(" _HPP: enable SERR =0x%x\n", ab->_hpp->enable_serr);
- dbg(" _HPP: enable PERR =0x%x\n", ab->_hpp->enable_perr);
- }
-}
-
-static int shpchprm_delete_resource(
- struct pci_resource **aprh,
- ulong base,
- ulong size)
-{
- struct pci_resource *res;
- struct pci_resource *prevnode;
- struct pci_resource *split_node;
- ulong tbase;
-
- shpchp_resource_sort_and_combine(aprh);
-
- for (res = *aprh; res; res = res->next) {
- if (res->base > base)
- continue;
-
- if ((res->base + res->length) < (base + size))
- continue;
-
- if (res->base < base) {
- tbase = base;
-
- if ((res->length - (tbase - res->base)) < size)
- continue;
-
- split_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!split_node)
- return -ENOMEM;
-
- split_node->base = res->base;
- split_node->length = tbase - res->base;
- res->base = tbase;
- res->length -= split_node->length;
-
- split_node->next = res->next;
- res->next = split_node;
- }
-
- if (res->length >= size) {
- split_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!split_node)
- return -ENOMEM;
-
- split_node->base = res->base + size;
- split_node->length = res->length - size;
- res->length = size;
-
- split_node->next = res->next;
- res->next = split_node;
- }
-
- if (*aprh == res) {
- *aprh = res->next;
- } else {
- prevnode = *aprh;
- while (prevnode->next != res)
- prevnode = prevnode->next;
-
- prevnode->next = res->next;
- }
- res->next = NULL;
- kfree(res);
- break;
- }
-
- return 0;
-}
-
-static int shpchprm_delete_resources(
- struct pci_resource **aprh,
- struct pci_resource *this
- )
-{
- struct pci_resource *res;
-
- for (res = this; res; res = res->next)
- shpchprm_delete_resource(aprh, res->base, res->length);
-
- return 0;
-}
-
-static int shpchprm_add_resource(
- struct pci_resource **aprh,
- ulong base,
- ulong size)
-{
- struct pci_resource *res;
-
- for (res = *aprh; res; res = res->next) {
- if ((res->base + res->length) == base) {
- res->length += size;
- size = 0L;
- break;
- }
- if (res->next == *aprh)
- break;
- }
-
- if (size) {
- res = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!res) {
- err ("acpi_shpchprm: alloc for res fail\n");
- return -ENOMEM;
- }
- memset(res, 0, sizeof (struct pci_resource));
-
- res->base = base;
- res->length = size;
- res->next = *aprh;
- *aprh = res;
- }
-
- return 0;
-}
-
-static int shpchprm_add_resources(
- struct pci_resource **aprh,
- struct pci_resource *this
- )
-{
- struct pci_resource *res;
- int rc = 0;
-
- for (res = this; res && !rc; res = res->next)
- rc = shpchprm_add_resource(aprh, res->base, res->length);
-
- return rc;
-}
-
-static void acpi_parse_io (
- struct acpi_bridge *ab,
- union acpi_resource_data *data
- )
-{
- struct acpi_resource_io *dataio;
- dataio = (struct acpi_resource_io *) data;
-
- dbg("Io Resource\n");
- dbg(" %d bit decode\n", ACPI_DECODE_16 == dataio->io_decode ? 16:10);
- dbg(" Range minimum base: %08X\n", dataio->min_base_address);
- dbg(" Range maximum base: %08X\n", dataio->max_base_address);
- dbg(" Alignment: %08X\n", dataio->alignment);
- dbg(" Range Length: %08X\n", dataio->range_length);
-}
-
-static void acpi_parse_fixed_io (
- struct acpi_bridge *ab,
- union acpi_resource_data *data
- )
-{
- struct acpi_resource_fixed_io *datafio;
- datafio = (struct acpi_resource_fixed_io *) data;
-
- dbg("Fixed Io Resource\n");
- dbg(" Range base address: %08X", datafio->base_address);
- dbg(" Range length: %08X", datafio->range_length);
-}
-
-static void acpi_parse_address16_32 (
- struct acpi_bridge *ab,
- union acpi_resource_data *data,
- acpi_resource_type id
- )
-{
- /*
- * acpi_resource_address16 == acpi_resource_address32
- * acpi_resource_address16 *data16 = (acpi_resource_address16 *) data;
- */
- struct acpi_resource_address32 *data32 = (struct acpi_resource_address32 *) data;
- struct pci_resource **aprh, **tprh;
-
- if (id == ACPI_RSTYPE_ADDRESS16)
- dbg("acpi_shpchprm:16-Bit Address Space Resource\n");
- else
- dbg("acpi_shpchprm:32-Bit Address Space Resource\n");
-
- switch (data32->resource_type) {
- case ACPI_MEMORY_RANGE:
- dbg(" Resource Type: Memory Range\n");
- aprh = &ab->mem_head;
- tprh = &ab->tmem_head;
-
- switch (data32->attribute.memory.cache_attribute) {
- case ACPI_NON_CACHEABLE_MEMORY:
- dbg(" Type Specific: Noncacheable memory\n");
- break;
- case ACPI_CACHABLE_MEMORY:
- dbg(" Type Specific: Cacheable memory\n");
- break;
- case ACPI_WRITE_COMBINING_MEMORY:
- dbg(" Type Specific: Write-combining memory\n");
- break;
- case ACPI_PREFETCHABLE_MEMORY:
- aprh = &ab->p_mem_head;
- dbg(" Type Specific: Prefetchable memory\n");
- break;
- default:
- dbg(" Type Specific: Invalid cache attribute\n");
- break;
- }
-
- dbg(" Type Specific: Read%s\n", ACPI_READ_WRITE_MEMORY == data32->attribute.memory.read_write_attribute ? "/Write":" Only");
- break;
-
- case ACPI_IO_RANGE:
- dbg(" Resource Type: I/O Range\n");
- aprh = &ab->io_head;
- tprh = &ab->tio_head;
-
- switch (data32->attribute.io.range_attribute) {
- case ACPI_NON_ISA_ONLY_RANGES:
- dbg(" Type Specific: Non-ISA Io Addresses\n");
- break;
- case ACPI_ISA_ONLY_RANGES:
- dbg(" Type Specific: ISA Io Addresses\n");
- break;
- case ACPI_ENTIRE_RANGE:
- dbg(" Type Specific: ISA and non-ISA Io Addresses\n");
- break;
- default:
- dbg(" Type Specific: Invalid range attribute\n");
- break;
- }
- break;
-
- case ACPI_BUS_NUMBER_RANGE:
- dbg(" Resource Type: Bus Number Range(fixed)\n");
- /* fixup to be compatible with the rest of php driver */
- data32->min_address_range++;
- data32->address_length--;
- aprh = &ab->bus_head;
- tprh = &ab->tbus_head;
- break;
- default:
- dbg(" Resource Type: Invalid resource type. Exiting.\n");
- return;
- }
-
- dbg(" Resource %s\n", ACPI_CONSUMER == data32->producer_consumer ? "Consumer":"Producer");
- dbg(" %s decode\n", ACPI_SUB_DECODE == data32->decode ? "Subtractive":"Positive");
- dbg(" Min address is %s fixed\n", ACPI_ADDRESS_FIXED == data32->min_address_fixed ? "":"not");
- dbg(" Max address is %s fixed\n", ACPI_ADDRESS_FIXED == data32->max_address_fixed ? "":"not");
- dbg(" Granularity: %08X\n", data32->granularity);
- dbg(" Address range min: %08X\n", data32->min_address_range);
- dbg(" Address range max: %08X\n", data32->max_address_range);
- dbg(" Address translation offset: %08X\n", data32->address_translation_offset);
- dbg(" Address Length: %08X\n", data32->address_length);
-
- if (0xFF != data32->resource_source.index) {
- dbg(" Resource Source Index: %X\n", data32->resource_source.index);
- /* dbg(" Resource Source: %s\n", data32->resource_source.string_ptr); */
- }
-
- shpchprm_add_resource(aprh, data32->min_address_range, data32->address_length);
-}
-
-static acpi_status acpi_parse_crs(
- struct acpi_bridge *ab,
- struct acpi_resource *crsbuf
- )
-{
- acpi_status status = AE_OK;
- struct acpi_resource *resource = crsbuf;
- u8 count = 0;
- u8 done = 0;
-
- while (!done) {
- dbg("acpi_shpchprm: PCI bus 0x%x Resource structure %x.\n", ab->bus, count++);
- switch (resource->id) {
- case ACPI_RSTYPE_IRQ:
- dbg("Irq -------- Resource\n");
- break;
- case ACPI_RSTYPE_DMA:
- dbg("DMA -------- Resource\n");
- break;
- case ACPI_RSTYPE_START_DPF:
- dbg("Start DPF -------- Resource\n");
- break;
- case ACPI_RSTYPE_END_DPF:
- dbg("End DPF -------- Resource\n");
- break;
- case ACPI_RSTYPE_IO:
- acpi_parse_io (ab, &resource->data);
- break;
- case ACPI_RSTYPE_FIXED_IO:
- acpi_parse_fixed_io (ab, &resource->data);
- break;
- case ACPI_RSTYPE_VENDOR:
- dbg("Vendor -------- Resource\n");
- break;
- case ACPI_RSTYPE_END_TAG:
- dbg("End_tag -------- Resource\n");
- done = 1;
- break;
- case ACPI_RSTYPE_MEM24:
- dbg("Mem24 -------- Resource\n");
- break;
- case ACPI_RSTYPE_MEM32:
- dbg("Mem32 -------- Resource\n");
- break;
- case ACPI_RSTYPE_FIXED_MEM32:
- dbg("Fixed Mem32 -------- Resource\n");
- break;
- case ACPI_RSTYPE_ADDRESS16:
- acpi_parse_address16_32(ab, &resource->data, ACPI_RSTYPE_ADDRESS16);
- break;
- case ACPI_RSTYPE_ADDRESS32:
- acpi_parse_address16_32(ab, &resource->data, ACPI_RSTYPE_ADDRESS32);
- break;
- case ACPI_RSTYPE_ADDRESS64:
- info("Address64 -------- Resource unparsed\n");
- break;
- case ACPI_RSTYPE_EXT_IRQ:
- dbg("Ext Irq -------- Resource\n");
- break;
- default:
- dbg("Invalid -------- resource type 0x%x\n", resource->id);
- break;
- }
-
- resource = (struct acpi_resource *) ((char *)resource + resource->length);
- }
-
- return status;
-}
-
-static acpi_status acpi_get_crs( struct acpi_bridge *ab)
-{
- acpi_status status;
- struct acpi_resource *crsbuf;
-
- status = acpi_evaluate_crs(ab->handle, &crsbuf);
- if (ACPI_SUCCESS(status)) {
- status = acpi_parse_crs(ab, crsbuf);
- kfree(crsbuf);
-
- shpchp_resource_sort_and_combine(&ab->bus_head);
- shpchp_resource_sort_and_combine(&ab->io_head);
- shpchp_resource_sort_and_combine(&ab->mem_head);
- shpchp_resource_sort_and_combine(&ab->p_mem_head);
-
- shpchprm_add_resources (&ab->tbus_head, ab->bus_head);
- shpchprm_add_resources (&ab->tio_head, ab->io_head);
- shpchprm_add_resources (&ab->tmem_head, ab->mem_head);
- shpchprm_add_resources (&ab->tp_mem_head, ab->p_mem_head);
- }
-
- return status;
-}
-
-/* find acpi_bridge downword from ab. */
-static struct acpi_bridge *
-find_acpi_bridge_by_bus(
- struct acpi_bridge *ab,
- int seg,
- int bus /* pdev->subordinate->number */
- )
-{
- struct acpi_bridge *lab = NULL;
-
- if (!ab)
- return NULL;
-
- if ((ab->bus == bus) && (ab->seg == seg))
- return ab;
-
- if (ab->child)
- lab = find_acpi_bridge_by_bus(ab->child, seg, bus);
-
- if (!lab)
- if (ab->next)
- lab = find_acpi_bridge_by_bus(ab->next, seg, bus);
-
- return lab;
-}
-
-/*
- * Build a device tree of ACPI PCI Bridges
- */
-static void shpchprm_acpi_register_a_bridge (
- struct acpi_bridge **head,
- struct acpi_bridge *pab, /* parent bridge to which child bridge is added */
- struct acpi_bridge *cab /* child bridge to add */
- )
-{
- struct acpi_bridge *lpab;
- struct acpi_bridge *lcab;
-
- lpab = find_acpi_bridge_by_bus(*head, pab->seg, pab->bus);
- if (!lpab) {
- if (!(pab->type & BRIDGE_TYPE_HOST))
- warn("PCI parent bridge s:b(%x:%x) not in list.\n", pab->seg, pab->bus);
- pab->next = *head;
- *head = pab;
- lpab = pab;
- }
-
- if ((cab->type & BRIDGE_TYPE_HOST) && (pab == cab))
- return;
-
- lcab = find_acpi_bridge_by_bus(*head, cab->seg, cab->bus);
- if (lcab) {
- if ((pab->bus != lcab->parent->bus) || (lcab->bus != cab->bus))
- err("PCI child bridge s:b(%x:%x) in list with diff parent.\n", cab->seg, cab->bus);
- return;
- } else
- lcab = cab;
-
- lcab->parent = lpab;
- lcab->next = lpab->child;
- lpab->child = lcab;
-}
-
-static acpi_status shpchprm_acpi_build_php_slots_callback(
- acpi_handle handle,
- u32 Level,
- void *context,
- void **retval
- )
-{
- ulong bus_num;
- ulong seg_num;
- ulong sun, adr;
- ulong padr = 0;
- acpi_handle phandle = NULL;
- struct acpi_bridge *pab = (struct acpi_bridge *)context;
- struct acpi_bridge *lab;
- acpi_status status;
- u8 *path_name = acpi_path_name(handle);
-
- /* get _SUN */
- status = acpi_evaluate_integer(handle, METHOD_NAME__SUN, NULL, &sun);
- switch(status) {
- case AE_NOT_FOUND:
- return AE_OK;
- default:
- if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm:%s _SUN fail=0x%x\n", path_name, status);
- return status;
- }
- }
-
- /* get _ADR. _ADR must exist if _SUN exists */
- status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
- if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status);
- return status;
- }
-
- dbg("acpi_shpchprm:%s sun=0x%08x adr=0x%08x\n", path_name, (u32)sun, (u32)adr);
-
- status = acpi_get_parent(handle, &phandle);
- if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm:%s get_parent fail=0x%x\n", path_name, status);
- return (status);
- }
-
- bus_num = pab->bus;
- seg_num = pab->seg;
-
- if (pab->bus == bus_num) {
- lab = pab;
+ err("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
+ status);
} else {
- dbg("WARN: pab is not parent\n");
- lab = find_acpi_bridge_by_bus(pab, seg_num, bus_num);
- if (!lab) {
- dbg("acpi_shpchprm: alloc new P2P bridge(%x) for sun(%08x)\n", (u32)bus_num, (u32)sun);
- lab = (struct acpi_bridge *)kmalloc(sizeof(struct acpi_bridge), GFP_KERNEL);
- if (!lab) {
- err("acpi_shpchprm: alloc for ab fail\n");
- return AE_NO_MEMORY;
- }
- memset(lab, 0, sizeof(struct acpi_bridge));
-
- lab->handle = phandle;
- lab->pbus = pab->bus;
- lab->pdevice = (int)(padr >> 16) & 0xffff;
- lab->pfunction = (int)(padr & 0xffff);
- lab->bus = (int)bus_num;
- lab->scanned = 0;
- lab->type = BRIDGE_TYPE_P2P;
-
- shpchprm_acpi_register_a_bridge (&acpi_bridges_head, pab, lab);
- } else
- dbg("acpi_shpchprm: found P2P bridge(%x) for sun(%08x)\n", (u32)bus_num, (u32)sun);
+ dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
}
-
- acpi_add_slot_to_php_slots(lab, (int)bus_num, handle, (u32)adr, (u32)sun);
- return (status);
-}
-
-static int shpchprm_acpi_build_php_slots(
- struct acpi_bridge *ab,
- u32 depth
- )
-{
- acpi_status status;
- u8 *path_name = acpi_path_name(ab->handle);
-
- /* Walk down this pci bridge to get _SUNs if any behind P2P */
- status = acpi_walk_namespace ( ACPI_TYPE_DEVICE,
- ab->handle,
- depth,
- shpchprm_acpi_build_php_slots_callback,
- ab,
- NULL );
- if (ACPI_FAILURE(status)) {
- dbg("acpi_shpchprm:%s walk for _SUN on pci bridge seg:bus(%x:%x) fail=0x%x\n", path_name, ab->seg, ab->bus, status);
- return -1;
- }
-
- return 0;
-}
-
-static void build_a_bridge(
- struct acpi_bridge *pab,
- struct acpi_bridge *ab
- )
-{
- u8 *path_name = acpi_path_name(ab->handle);
-
- shpchprm_acpi_register_a_bridge (&acpi_bridges_head, pab, ab);
-
- switch (ab->type) {
- case BRIDGE_TYPE_HOST:
- dbg("acpi_shpchprm: Registered PCI HOST Bridge(%02x) on s:b:d:f(%02x:%02x:%02x:%02x) [%s]\n",
- ab->bus, ab->seg, ab->pbus, ab->pdevice, ab->pfunction, path_name);
- break;
- case BRIDGE_TYPE_P2P:
- dbg("acpi_shpchprm: Registered PCI P2P Bridge(%02x-%02x) on s:b:d:f(%02x:%02x:%02x:%02x) [%s]\n",
- ab->pbus, ab->bus, ab->seg, ab->pbus, ab->pdevice, ab->pfunction, path_name);
- break;
- };
-
- /* build any immediate PHP slots under this pci bridge */
- shpchprm_acpi_build_php_slots(ab, 1);
-}
-
-static struct acpi_bridge * add_p2p_bridge(
- acpi_handle handle,
- struct acpi_bridge *pab, /* parent */
- ulong adr
- )
-{
- struct acpi_bridge *ab;
- struct pci_dev *pdev;
- ulong devnum, funcnum;
- u8 *path_name = acpi_path_name(handle);
-
- ab = (struct acpi_bridge *) kmalloc (sizeof(struct acpi_bridge), GFP_KERNEL);
- if (!ab) {
- err("acpi_shpchprm: alloc for ab fail\n");
- return NULL;
- }
- memset(ab, 0, sizeof(struct acpi_bridge));
-
- devnum = (adr >> 16) & 0xffff;
- funcnum = adr & 0xffff;
-
- pdev = pci_find_slot(pab->bus, PCI_DEVFN(devnum, funcnum));
- if (!pdev || !pdev->subordinate) {
- err("acpi_shpchprm:%s is not a P2P Bridge\n", path_name);
- kfree(ab);
- return NULL;
- }
-
- ab->handle = handle;
- ab->seg = pab->seg;
- ab->pbus = pab->bus; /* or pdev->bus->number */
- ab->pdevice = devnum; /* or PCI_SLOT(pdev->devfn) */
- ab->pfunction = funcnum; /* or PCI_FUNC(pdev->devfn) */
- ab->bus = pdev->subordinate->number;
- ab->scanned = 0;
- ab->type = BRIDGE_TYPE_P2P;
-
- dbg("acpi_shpchprm: P2P(%x-%x) on pci=b:d:f(%x:%x:%x) acpi=b:d:f(%x:%x:%x) [%s]\n",
- pab->bus, ab->bus, pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
- pab->bus, (u32)devnum, (u32)funcnum, path_name);
-
- build_a_bridge(pab, ab);
-
- return ab;
-}
-
-static acpi_status scan_p2p_bridge(
- acpi_handle handle,
- u32 Level,
- void *context,
- void **retval
- )
-{
- struct acpi_bridge *pab = (struct acpi_bridge *)context;
- struct acpi_bridge *ab;
- acpi_status status;
- ulong adr = 0;
- u8 *path_name = acpi_path_name(handle);
- ulong devnum, funcnum;
- struct pci_dev *pdev;
-
- /* get device, function */
- status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
- if (ACPI_FAILURE(status)) {
- if (status != AE_NOT_FOUND)
- err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status);
- return AE_OK;
- }
-
- devnum = (adr >> 16) & 0xffff;
- funcnum = adr & 0xffff;
-
- pdev = pci_find_slot(pab->bus, PCI_DEVFN(devnum, funcnum));
- if (!pdev)
- return AE_OK;
- if (!pdev->subordinate)
- return AE_OK;
-
- ab = add_p2p_bridge(handle, pab, adr);
- if (ab) {
- status = acpi_walk_namespace ( ACPI_TYPE_DEVICE,
- handle,
- (u32)1,
- scan_p2p_bridge,
- ab,
- NULL);
- if (ACPI_FAILURE(status))
- dbg("acpi_shpchprm:%s find_p2p fail=0x%x\n", path_name, status);
- }
-
- return AE_OK;
-}
-
-static struct acpi_bridge * add_host_bridge(
- acpi_handle handle,
- ulong segnum,
- ulong busnum
- )
-{
- ulong adr = 0;
- acpi_status status;
- struct acpi_bridge *ab;
- u8 *path_name = acpi_path_name(handle);
-
- /* get device, function: host br adr is always 0000 though. */
- status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
- if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status);
- return NULL;
- }
- dbg("acpi_shpchprm: ROOT PCI seg(0x%x)bus(0x%x)dev(0x%x)func(0x%x) [%s]\n", (u32)segnum, (u32)busnum,
- (u32)(adr >> 16) & 0xffff, (u32)adr & 0xffff, path_name);
-
- ab = (struct acpi_bridge *) kmalloc (sizeof(struct acpi_bridge), GFP_KERNEL);
- if (!ab) {
- err("acpi_shpchprm: alloc for ab fail\n");
- return NULL;
- }
- memset(ab, 0, sizeof(struct acpi_bridge));
-
- ab->handle = handle;
- ab->seg = (int)segnum;
- ab->bus = ab->pbus = (int)busnum;
- ab->pdevice = (int)(adr >> 16) & 0xffff;
- ab->pfunction = (int)(adr & 0xffff);
- ab->scanned = 0;
- ab->type = BRIDGE_TYPE_HOST;
-
- /* get root pci bridge's current resources */
- status = acpi_get_crs(ab);
- if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm:%s evaluate _CRS fail=0x%x\n", path_name, status);
- kfree(ab);
- return NULL;
- }
- build_a_bridge(ab, ab);
-
- return ab;
-}
-
-static acpi_status acpi_scan_from_root_pci_callback (
- acpi_handle handle,
- u32 Level,
- void *context,
- void **retval
- )
-{
- ulong segnum = 0;
- ulong busnum = 0;
- acpi_status status;
- struct acpi_bridge *ab;
- u8 *path_name = acpi_path_name(handle);
-
- /* get bus number of this pci root bridge */
- status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL, &segnum);
- if (ACPI_FAILURE(status)) {
- if (status != AE_NOT_FOUND) {
- err("acpi_shpchprm:%s evaluate _SEG fail=0x%x\n", path_name, status);
- return status;
- }
- segnum = 0;
- }
-
- /* get bus number of this pci root bridge */
- status = acpi_evaluate_integer(handle, METHOD_NAME__BBN, NULL, &busnum);
- if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm:%s evaluate _BBN fail=0x%x\n", path_name, status);
- return (status);
- }
-
- ab = add_host_bridge(handle, segnum, busnum);
- if (ab) {
- status = acpi_walk_namespace ( ACPI_TYPE_DEVICE,
- handle,
- 1,
- scan_p2p_bridge,
- ab,
- NULL);
- if (ACPI_FAILURE(status))
- dbg("acpi_shpchprm:%s find_p2p fail=0x%x\n", path_name, status);
- }
-
- return AE_OK;
-}
-
-static int shpchprm_acpi_scan_pci (void)
-{
- acpi_status status;
-
- /*
- * TBD: traverse LDM device tree with the help of
- * unified ACPI augmented for php device population.
- */
- status = acpi_get_devices ( PCI_ROOT_HID_STRING,
- acpi_scan_from_root_pci_callback,
- NULL,
- NULL );
- if (ACPI_FAILURE(status)) {
- err("acpi_shpchprm:get_device PCI ROOT HID fail=0x%x\n", status);
- return -1;
- }
-
- return 0;
-}
-
-int shpchprm_init(enum php_ctlr_type ctlr_type)
-{
- int rc;
-
- if (ctlr_type != PCI)
- return -ENODEV;
-
- dbg("shpchprm ACPI init <enter>\n");
- acpi_bridges_head = NULL;
-
- /* construct PCI bus:device tree of acpi_handles */
- rc = shpchprm_acpi_scan_pci();
- if (rc)
- return rc;
-
- dbg("shpchprm ACPI init %s\n", (rc)?"fail":"success");
- return rc;
-}
-
-static void free_a_slot(struct acpi_php_slot *aps)
-{
- dbg(" free a php func of slot(0x%02x) on PCI b:d:f=0x%02x:%02x:%02x\n", aps->sun, aps->bus, aps->dev, aps->fun);
-
- free_pci_resource (aps->io_head);
- free_pci_resource (aps->bus_head);
- free_pci_resource (aps->mem_head);
- free_pci_resource (aps->p_mem_head);
-
- kfree(aps);
-}
-
-static void free_a_bridge( struct acpi_bridge *ab)
-{
- struct acpi_php_slot *aps, *next;
-
- switch (ab->type) {
- case BRIDGE_TYPE_HOST:
- dbg("Free ACPI PCI HOST Bridge(%x) [%s] on s:b:d:f(%x:%x:%x:%x)\n",
- ab->bus, acpi_path_name(ab->handle), ab->seg, ab->pbus, ab->pdevice, ab->pfunction);
- break;
- case BRIDGE_TYPE_P2P:
- dbg("Free ACPI PCI P2P Bridge(%x-%x) [%s] on s:b:d:f(%x:%x:%x:%x)\n",
- ab->pbus, ab->bus, acpi_path_name(ab->handle), ab->seg, ab->pbus, ab->pdevice, ab->pfunction);
- break;
- };
-
- /* free slots first */
- for (aps = ab->slots; aps; aps = next) {
- next = aps->next;
- free_a_slot(aps);
- }
-
- free_pci_resource (ab->io_head);
- free_pci_resource (ab->tio_head);
- free_pci_resource (ab->bus_head);
- free_pci_resource (ab->tbus_head);
- free_pci_resource (ab->mem_head);
- free_pci_resource (ab->tmem_head);
- free_pci_resource (ab->p_mem_head);
- free_pci_resource (ab->tp_mem_head);
-
- kfree(ab);
-}
-
-static void shpchprm_free_bridges ( struct acpi_bridge *ab)
-{
- if (!ab)
- return;
-
- if (ab->child)
- shpchprm_free_bridges (ab->child);
-
- if (ab->next)
- shpchprm_free_bridges (ab->next);
-
- free_a_bridge(ab);
-}
-
-void shpchprm_cleanup(void)
-{
- shpchprm_free_bridges (acpi_bridges_head);
-}
-
-static int get_number_of_slots (
- struct acpi_bridge *ab,
- int selfonly
- )
-{
- struct acpi_php_slot *aps;
- int prev_slot = -1;
- int slot_num = 0;
-
- for ( aps = ab->slots; aps; aps = aps->next)
- if (aps->dev != prev_slot) {
- prev_slot = aps->dev;
- slot_num++;
- }
-
- if (ab->child)
- slot_num += get_number_of_slots (ab->child, 0);
-
- if (selfonly)
- return slot_num;
-
- if (ab->next)
- slot_num += get_number_of_slots (ab->next, 0);
-
- return slot_num;
-}
-
-static int print_acpi_resources (struct acpi_bridge *ab)
-{
- struct acpi_php_slot *aps;
- int i;
-
- switch (ab->type) {
- case BRIDGE_TYPE_HOST:
- dbg("PCI HOST Bridge (%x) [%s]\n", ab->bus, acpi_path_name(ab->handle));
- break;
- case BRIDGE_TYPE_P2P:
- dbg("PCI P2P Bridge (%x-%x) [%s]\n", ab->pbus, ab->bus, acpi_path_name(ab->handle));
- break;
- };
-
- print_pci_resources (ab);
-
- for ( i = -1, aps = ab->slots; aps; aps = aps->next) {
- if (aps->dev == i)
- continue;
- dbg(" Slot sun(%x) s:b:d:f(%02x:%02x:%02x:%02x)\n", aps->sun, aps->seg, aps->bus, aps->dev, aps->fun);
- print_slot_resources(aps);
- i = aps->dev;
- }
-
- if (ab->child)
- print_acpi_resources (ab->child);
-
- if (ab->next)
- print_acpi_resources (ab->next);
-
- return 0;
-}
-
-int shpchprm_print_pirt(void)
-{
- dbg("SHPCHPRM ACPI Slots\n");
- if (acpi_bridges_head)
- print_acpi_resources (acpi_bridges_head);
- return 0;
-}
-
-static struct acpi_php_slot * get_acpi_slot (
- struct acpi_bridge *ab,
- u32 sun
- )
-{
- struct acpi_php_slot *aps = NULL;
-
- for ( aps = ab->slots; aps; aps = aps->next)
- if (aps->sun == sun)
- return aps;
-
- if (!aps && ab->child) {
- aps = (struct acpi_php_slot *)get_acpi_slot (ab->child, sun);
- if (aps)
- return aps;
- }
-
- if (!aps && ab->next) {
- aps = (struct acpi_php_slot *)get_acpi_slot (ab->next, sun);
- if (aps)
- return aps;
- }
-
- return aps;
-
-}
-
-#if 0
-static void * shpchprm_get_slot(struct slot *slot)
-{
- struct acpi_bridge *ab = acpi_bridges_head;
- struct acpi_php_slot *aps = get_acpi_slot (ab, slot->number);
-
- aps->slot = slot;
-
- dbg("Got acpi slot sun(%x): s:b:d:f(%x:%x:%x:%x)\n", aps->sun, aps->seg, aps->bus, aps->dev, aps->fun);
-
- return (void *)aps;
-}
-#endif
-
-static void shpchprm_dump_func_res( struct pci_func *fun)
-{
- struct pci_func *func = fun;
-
- if (func->bus_head) {
- dbg(": BUS Resources:\n");
- print_pci_resource (func->bus_head);
- }
- if (func->io_head) {
- dbg(": IO Resources:\n");
- print_pci_resource (func->io_head);
- }
- if (func->mem_head) {
- dbg(": MEM Resources:\n");
- print_pci_resource (func->mem_head);
- }
- if (func->p_mem_head) {
- dbg(": PMEM Resources:\n");
- print_pci_resource (func->p_mem_head);
- }
-}
-
-static void shpchprm_dump_ctrl_res( struct controller *ctlr)
-{
- struct controller *ctrl = ctlr;
-
- if (ctrl->bus_head) {
- dbg(": BUS Resources:\n");
- print_pci_resource (ctrl->bus_head);
- }
- if (ctrl->io_head) {
- dbg(": IO Resources:\n");
- print_pci_resource (ctrl->io_head);
- }
- if (ctrl->mem_head) {
- dbg(": MEM Resources:\n");
- print_pci_resource (ctrl->mem_head);
- }
- if (ctrl->p_mem_head) {
- dbg(": PMEM Resources:\n");
- print_pci_resource (ctrl->p_mem_head);
- }
-}
-
-static int shpchprm_get_used_resources (
- struct controller *ctrl,
- struct pci_func *func
- )
-{
- return shpchp_save_used_resources (ctrl, func, !DISABLE_CARD);
-}
-
-static int configure_existing_function(
- struct controller *ctrl,
- struct pci_func *func
- )
-{
- int rc;
-
- /* see how much resources the func has used. */
- rc = shpchprm_get_used_resources (ctrl, func);
-
- if (!rc) {
- /* subtract the resources used by the func from ctrl resources */
- rc = shpchprm_delete_resources (&ctrl->bus_head, func->bus_head);
- rc |= shpchprm_delete_resources (&ctrl->io_head, func->io_head);
- rc |= shpchprm_delete_resources (&ctrl->mem_head, func->mem_head);
- rc |= shpchprm_delete_resources (&ctrl->p_mem_head, func->p_mem_head);
- if (rc)
- warn("aCEF: cannot del used resources\n");
- } else
- err("aCEF: cannot get used resources\n");
-
- return rc;
-}
-
-static int bind_pci_resources_to_slots ( struct controller *ctrl)
-{
- struct pci_func *func, new_func;
- int busn = ctrl->slot_bus;
- int devn, funn;
- u32 vid;
-
- for (devn = 0; devn < 32; devn++) {
- for (funn = 0; funn < 8; funn++) {
- /*
- if (devn == ctrl->device && funn == ctrl->function)
- continue;
- */
- /* find out if this entry is for an occupied slot */
- vid = 0xFFFFFFFF;
- pci_bus_read_config_dword(ctrl->pci_dev->subordinate, PCI_DEVFN(devn, funn), PCI_VENDOR_ID, &vid);
-
- if (vid != 0xFFFFFFFF) {
- func = shpchp_slot_find(busn, devn, funn);
- if (!func) {
- memset(&new_func, 0, sizeof(struct pci_func));
- new_func.bus = busn;
- new_func.device = devn;
- new_func.function = funn;
- new_func.is_a_board = 1;
- configure_existing_function(ctrl, &new_func);
- shpchprm_dump_func_res(&new_func);
- } else {
- configure_existing_function(ctrl, func);
- shpchprm_dump_func_res(func);
- }
- dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
- }
- }
- }
-
- return 0;
-}
-
-static int bind_pci_resources(
- struct controller *ctrl,
- struct acpi_bridge *ab
- )
-{
- int status = 0;
-
- if (ab->bus_head) {
- dbg("bapr: BUS Resources add on PCI 0x%x\n", ab->bus);
- status = shpchprm_add_resources (&ctrl->bus_head, ab->bus_head);
- if (shpchprm_delete_resources (&ab->bus_head, ctrl->bus_head))
- warn("bapr: cannot sub BUS Resource on PCI 0x%x\n", ab->bus);
- if (status) {
- err("bapr: BUS Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status);
- return status;
- }
- } else
- info("bapr: No BUS Resource on PCI 0x%x.\n", ab->bus);
-
- if (ab->io_head) {
- dbg("bapr: IO Resources add on PCI 0x%x\n", ab->bus);
- status = shpchprm_add_resources (&ctrl->io_head, ab->io_head);
- if (shpchprm_delete_resources (&ab->io_head, ctrl->io_head))
- warn("bapr: cannot sub IO Resource on PCI 0x%x\n", ab->bus);
- if (status) {
- err("bapr: IO Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status);
- return status;
- }
- } else
- info("bapr: No IO Resource on PCI 0x%x.\n", ab->bus);
-
- if (ab->mem_head) {
- dbg("bapr: MEM Resources add on PCI 0x%x\n", ab->bus);
- status = shpchprm_add_resources (&ctrl->mem_head, ab->mem_head);
- if (shpchprm_delete_resources (&ab->mem_head, ctrl->mem_head))
- warn("bapr: cannot sub MEM Resource on PCI 0x%x\n", ab->bus);
- if (status) {
- err("bapr: MEM Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status);
- return status;
- }
- } else
- info("bapr: No MEM Resource on PCI 0x%x.\n", ab->bus);
-
- if (ab->p_mem_head) {
- dbg("bapr: PMEM Resources add on PCI 0x%x\n", ab->bus);
- status = shpchprm_add_resources (&ctrl->p_mem_head, ab->p_mem_head);
- if (shpchprm_delete_resources (&ab->p_mem_head, ctrl->p_mem_head))
- warn("bapr: cannot sub PMEM Resource on PCI 0x%x\n", ab->bus);
- if (status) {
- err("bapr: PMEM Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status);
- return status;
- }
- } else
- info("bapr: No PMEM Resource on PCI 0x%x.\n", ab->bus);
-
- return status;
-}
-
-static int no_pci_resources( struct acpi_bridge *ab)
-{
- return !(ab->p_mem_head || ab->mem_head || ab->io_head || ab->bus_head);
-}
-
-static int find_pci_bridge_resources (
- struct controller *ctrl,
- struct acpi_bridge *ab
- )
-{
- int rc = 0;
- struct pci_func func;
-
- memset(&func, 0, sizeof(struct pci_func));
-
- func.bus = ab->pbus;
- func.device = ab->pdevice;
- func.function = ab->pfunction;
- func.is_a_board = 1;
-
- /* Get used resources for this PCI bridge */
- rc = shpchp_save_used_resources (ctrl, &func, !DISABLE_CARD);
-
- ab->io_head = func.io_head;
- ab->mem_head = func.mem_head;
- ab->p_mem_head = func.p_mem_head;
- ab->bus_head = func.bus_head;
- if (ab->bus_head)
- shpchprm_delete_resource(&ab->bus_head, ctrl->bus, 1);
-
- return rc;
-}
-
-static int get_pci_resources_from_bridge(
- struct controller *ctrl,
- struct acpi_bridge *ab
- )
-{
- int rc = 0;
-
- dbg("grfb: Get Resources for PCI 0x%x from actual PCI bridge 0x%x.\n", ctrl->bus, ab->bus);
-
- rc = find_pci_bridge_resources (ctrl, ab);
-
- shpchp_resource_sort_and_combine(&ab->bus_head);
- shpchp_resource_sort_and_combine(&ab->io_head);
- shpchp_resource_sort_and_combine(&ab->mem_head);
- shpchp_resource_sort_and_combine(&ab->p_mem_head);
-
- shpchprm_add_resources (&ab->tbus_head, ab->bus_head);
- shpchprm_add_resources (&ab->tio_head, ab->io_head);
- shpchprm_add_resources (&ab->tmem_head, ab->mem_head);
- shpchprm_add_resources (&ab->tp_mem_head, ab->p_mem_head);
-
- return rc;
-}
-
-static int get_pci_resources(
- struct controller *ctrl,
- struct acpi_bridge *ab
- )
-{
- int rc = 0;
-
- if (no_pci_resources(ab)) {
- dbg("spbr:PCI 0x%x has no resources. Get parent resources.\n", ab->bus);
- rc = get_pci_resources_from_bridge(ctrl, ab);
- }
-
- return rc;
}
int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
@@ -1570,144 +147,40 @@
return 0;
}
-/*
- * Get resources for this ctrl.
- * 1. get total resources from ACPI _CRS or bridge (this ctrl)
- * 2. find used resources of existing adapters
- * 3. subtract used resources from total resources
- */
-int shpchprm_find_available_resources( struct controller *ctrl)
+void get_hp_hw_control_from_firmware(struct pci_dev *dev)
{
- int rc = 0;
- struct acpi_bridge *ab;
-
- ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->pci_dev->subordinate->number);
- if (!ab) {
- err("pfar:cannot locate acpi bridge of PCI 0x%x.\n", ctrl->pci_dev->subordinate->number);
- return -1;
- }
- if (no_pci_resources(ab)) {
- rc = get_pci_resources(ctrl, ab);
- if (rc) {
- err("pfar:cannot get pci resources of PCI 0x%x.\n",ctrl->pci_dev->subordinate->number);
- return -1;
- }
- }
-
- rc = bind_pci_resources(ctrl, ab);
- dbg("pfar:pre-Bind PCI 0x%x Ctrl Resource Dump\n", ctrl->pci_dev->subordinate->number);
- shpchprm_dump_ctrl_res(ctrl);
-
- bind_pci_resources_to_slots (ctrl);
-
- dbg("pfar:post-Bind PCI 0x%x Ctrl Resource Dump\n", ctrl->pci_dev->subordinate->number);
- shpchprm_dump_ctrl_res(ctrl);
-
- return rc;
+ /*
+ * OSHP is an optional ACPI firmware control method. If present,
+ * we need to run it to inform BIOS that we will control SHPC
+ * hardware from now on.
+ */
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+ if (!handle)
+ return;
+ acpi_run_oshp(handle);
}
-int shpchprm_set_hpp(
- struct controller *ctrl,
- struct pci_func *func,
- u8 card_type
- )
+void get_hp_params_from_firmware(struct pci_dev *dev,
+ struct hotplug_params *hpp)
{
- struct acpi_bridge *ab;
- struct pci_bus lpci_bus, *pci_bus;
- int rc = 0;
- unsigned int devfn;
- u8 cls= 0x08; /* default cache line size */
- u8 lt = 0x40; /* default latency timer */
- u8 ep = 0;
- u8 es = 0;
+ acpi_status status = AE_NOT_FOUND;
+ struct pci_dev *pdev = dev;
- memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
-
- if (ab) {
- if (ab->_hpp) {
- lt = (u8)ab->_hpp->latency_timer;
- cls = (u8)ab->_hpp->cache_line_size;
- ep = (u8)ab->_hpp->enable_perr;
- es = (u8)ab->_hpp->enable_serr;
- } else
- dbg("_hpp: no _hpp for B/D/F=%#x/%#x/%#x. use default value\n", func->bus, func->device, func->function);
- } else
- dbg("_hpp: no acpi bridge for B/D/F = %#x/%#x/%#x. use default value\n", func->bus, func->device, func->function);
-
-
- if (card_type == PCI_HEADER_TYPE_BRIDGE) {
- /* set subordinate Latency Timer */
- rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, lt);
- }
-
- /* set base Latency Timer */
- rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, lt);
- dbg(" set latency timer =0x%02x: %x\n", lt, rc);
-
- rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, cls);
- dbg(" set cache_line_size=0x%02x: %x\n", cls, rc);
-
- return rc;
-}
-
-void shpchprm_enable_card(
- struct controller *ctrl,
- struct pci_func *func,
- u8 card_type)
-{
- u16 command, cmd, bcommand, bcmd;
- struct pci_bus lpci_bus, *pci_bus;
- struct acpi_bridge *ab;
- unsigned int devfn;
- int rc;
-
- memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command);
-
- if (card_type == PCI_HEADER_TYPE_BRIDGE) {
- rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand);
- }
-
- cmd = command = command | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
- | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
- bcmd = bcommand = bcommand | PCI_BRIDGE_CTL_NO_ISA;
-
- ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
- if (ab) {
- if (ab->_hpp) {
- if (ab->_hpp->enable_perr) {
- command |= PCI_COMMAND_PARITY;
- bcommand |= PCI_BRIDGE_CTL_PARITY;
- } else {
- command &= ~PCI_COMMAND_PARITY;
- bcommand &= ~PCI_BRIDGE_CTL_PARITY;
- }
- if (ab->_hpp->enable_serr) {
- command |= PCI_COMMAND_SERR;
- bcommand |= PCI_BRIDGE_CTL_SERR;
- } else {
- command &= ~PCI_COMMAND_SERR;
- bcommand &= ~PCI_BRIDGE_CTL_SERR;
- }
- } else
- dbg("no _hpp for B/D/F = %#x/%#x/%#x.\n", func->bus, func->device, func->function);
- } else
- dbg("no acpi bridge for B/D/F = %#x/%#x/%#x.\n", func->bus, func->device, func->function);
-
- if (command != cmd) {
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
- }
- if ((card_type == PCI_HEADER_TYPE_BRIDGE) && (bcommand != bcmd)) {
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand);
+ /*
+ * _HPP settings apply to all child buses, until another _HPP is
+ * encountered. If we don't find an _HPP for the input pci dev,
+ * look for it in the parent device scope since that would apply to
+ * this pci dev. If we don't find any _HPP, use hardcoded defaults
+ */
+ while (pdev && (ACPI_FAILURE(status))) {
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
+ if (!handle)
+ break;
+ status = acpi_run_hpp(handle, hpp);
+ if (!(pdev->bus->parent))
+ break;
+ /* Check if a parent object supports _HPP */
+ pdev = pdev->bus->parent->self;
}
}
diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c
index ba6c549..ed6c125 100644
--- a/drivers/pci/hotplug/shpchprm_legacy.c
+++ b/drivers/pci/hotplug/shpchprm_legacy.c
@@ -27,33 +27,11 @@
*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#ifdef CONFIG_IA64
-#include <asm/iosapic.h>
-#endif
#include "shpchp.h"
-#include "shpchprm.h"
-#include "shpchprm_legacy.h"
-
-static void __iomem *shpchp_rom_start;
-static u16 unused_IRQ;
-
-void shpchprm_cleanup(void)
-{
- if (shpchp_rom_start)
- iounmap(shpchp_rom_start);
-}
-
-int shpchprm_print_pirt(void)
-{
- return 0;
-}
int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
{
@@ -63,377 +41,14 @@
return 0;
}
-/* Find the Hot Plug Resource Table in the specified region of memory */
-static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iomem *end)
+void get_hp_params_from_firmware(struct pci_dev *dev,
+ struct hotplug_params *hpp)
{
- void __iomem *fp;
- void __iomem *endp;
- u8 temp1, temp2, temp3, temp4;
- int status = 0;
-
- endp = (end - sizeof(struct hrt) + 1);
-
- for (fp = begin; fp <= endp; fp += 16) {
- temp1 = readb(fp + SIG0);
- temp2 = readb(fp + SIG1);
- temp3 = readb(fp + SIG2);
- temp4 = readb(fp + SIG3);
- if (temp1 == '$' && temp2 == 'H' && temp3 == 'R' && temp4 == 'T') {
- status = 1;
- break;
- }
- }
-
- if (!status)
- fp = NULL;
-
- dbg("Discovered Hotplug Resource Table at %p\n", fp);
- return fp;
+ return;
}
-/*
- * shpchprm_find_available_resources
- *
- * Finds available memory, IO, and IRQ resources for programming
- * devices which may be added to the system
- * this function is for hot plug ADD!
- *
- * returns 0 if success
- */
-int shpchprm_find_available_resources(struct controller *ctrl)
+void get_hp_hw_control_from_firmware(struct pci_dev *dev)
{
- u8 populated_slot;
- u8 bridged_slot;
- void __iomem *one_slot;
- struct pci_func *func = NULL;
- int i = 10, index = 0;
- u32 temp_dword, rc;
- ulong temp_ulong;
- struct pci_resource *mem_node;
- struct pci_resource *p_mem_node;
- struct pci_resource *io_node;
- struct pci_resource *bus_node;
- void __iomem *rom_resource_table;
- struct pci_bus lpci_bus, *pci_bus;
- u8 cfgspc_irq, temp;
-
- memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- rom_resource_table = detect_HRT_floating_pointer(shpchp_rom_start, shpchp_rom_start + 0xffff);
- dbg("rom_resource_table = %p\n", rom_resource_table);
- if (rom_resource_table == NULL)
- return -ENODEV;
-
- /* Sum all resources and setup resource maps */
- unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
- dbg("unused_IRQ = %x\n", unused_IRQ);
-
- temp = 0;
- while (unused_IRQ) {
- if (unused_IRQ & 1) {
- shpchp_disk_irq = temp;
- break;
- }
- unused_IRQ = unused_IRQ >> 1;
- temp++;
- }
-
- dbg("shpchp_disk_irq= %d\n", shpchp_disk_irq);
- unused_IRQ = unused_IRQ >> 1;
- temp++;
-
- while (unused_IRQ) {
- if (unused_IRQ & 1) {
- shpchp_nic_irq = temp;
- break;
- }
- unused_IRQ = unused_IRQ >> 1;
- temp++;
- }
-
- dbg("shpchp_nic_irq= %d\n", shpchp_nic_irq);
- unused_IRQ = readl(rom_resource_table + PCIIRQ);
-
- temp = 0;
-
- pci_read_config_byte(ctrl->pci_dev, PCI_INTERRUPT_LINE, &cfgspc_irq);
-
- if (!shpchp_nic_irq) {
- shpchp_nic_irq = cfgspc_irq;
- }
-
- if (!shpchp_disk_irq) {
- shpchp_disk_irq = cfgspc_irq;
- }
-
- dbg("shpchp_disk_irq, shpchp_nic_irq= %d, %d\n", shpchp_disk_irq, shpchp_nic_irq);
-
- one_slot = rom_resource_table + sizeof(struct hrt);
-
- i = readb(rom_resource_table + NUMBER_OF_ENTRIES);
- dbg("number_of_entries = %d\n", i);
-
- if (!readb(one_slot + SECONDARY_BUS))
- return (1);
-
- dbg("dev|IO base|length|MEMbase|length|PM base|length|PB SB MB\n");
-
- while (i && readb(one_slot + SECONDARY_BUS)) {
- u8 dev_func = readb(one_slot + DEV_FUNC);
- u8 primary_bus = readb(one_slot + PRIMARY_BUS);
- u8 secondary_bus = readb(one_slot + SECONDARY_BUS);
- u8 max_bus = readb(one_slot + MAX_BUS);
- u16 io_base = readw(one_slot + IO_BASE);
- u16 io_length = readw(one_slot + IO_LENGTH);
- u16 mem_base = readw(one_slot + MEM_BASE);
- u16 mem_length = readw(one_slot + MEM_LENGTH);
- u16 pre_mem_base = readw(one_slot + PRE_MEM_BASE);
- u16 pre_mem_length = readw(one_slot + PRE_MEM_LENGTH);
-
- dbg("%2.2x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x |%2.2x %2.2x %2.2x\n",
- dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
- primary_bus, secondary_bus, max_bus);
-
- /* If this entry isn't for our controller's bus, ignore it */
- if (primary_bus != ctrl->slot_bus) {
- i--;
- one_slot += sizeof(struct slot_rt);
- continue;
- }
- /* find out if this entry is for an occupied slot */
- temp_dword = 0xFFFFFFFF;
- pci_bus->number = primary_bus;
- pci_bus_read_config_dword(pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
-
- dbg("temp_D_word = %x\n", temp_dword);
-
- if (temp_dword != 0xFFFFFFFF) {
- index = 0;
- func = shpchp_slot_find(primary_bus, dev_func >> 3, 0);
-
- while (func && (func->function != (dev_func & 0x07))) {
- dbg("func = %p b:d:f(%x:%x:%x)\n", func, primary_bus, dev_func >> 3, index);
- func = shpchp_slot_find(primary_bus, dev_func >> 3, index++);
- }
-
- /* If we can't find a match, skip this table entry */
- if (!func) {
- i--;
- one_slot += sizeof(struct slot_rt);
- continue;
- }
- /* this may not work and shouldn't be used */
- if (secondary_bus != primary_bus)
- bridged_slot = 1;
- else
- bridged_slot = 0;
-
- populated_slot = 1;
- } else {
- populated_slot = 0;
- bridged_slot = 0;
- }
- dbg("slot populated =%s \n", populated_slot?"yes":"no");
-
- /* If we've got a valid IO base, use it */
-
- temp_ulong = io_base + io_length;
-
- if ((io_base) && (temp_ulong <= 0x10000)) {
- io_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!io_node)
- return -ENOMEM;
-
- io_node->base = (ulong)io_base;
- io_node->length = (ulong)io_length;
- dbg("found io_node(base, length) = %x, %x\n", io_node->base, io_node->length);
-
- if (!populated_slot) {
- io_node->next = ctrl->io_head;
- ctrl->io_head = io_node;
- } else {
- io_node->next = func->io_head;
- func->io_head = io_node;
- }
- }
-
- /* If we've got a valid memory base, use it */
- temp_ulong = mem_base + mem_length;
- if ((mem_base) && (temp_ulong <= 0x10000)) {
- mem_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!mem_node)
- return -ENOMEM;
-
- mem_node->base = (ulong)mem_base << 16;
- mem_node->length = (ulong)(mem_length << 16);
- dbg("found mem_node(base, length) = %x, %x\n", mem_node->base, mem_node->length);
-
- if (!populated_slot) {
- mem_node->next = ctrl->mem_head;
- ctrl->mem_head = mem_node;
- } else {
- mem_node->next = func->mem_head;
- func->mem_head = mem_node;
- }
- }
-
- /*
- * If we've got a valid prefetchable memory base, and
- * the base + length isn't greater than 0xFFFF
- */
- temp_ulong = pre_mem_base + pre_mem_length;
- if ((pre_mem_base) && (temp_ulong <= 0x10000)) {
- p_mem_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!p_mem_node)
- return -ENOMEM;
-
- p_mem_node->base = (ulong)pre_mem_base << 16;
- p_mem_node->length = (ulong)pre_mem_length << 16;
- dbg("found p_mem_node(base, length) = %x, %x\n", p_mem_node->base, p_mem_node->length);
-
- if (!populated_slot) {
- p_mem_node->next = ctrl->p_mem_head;
- ctrl->p_mem_head = p_mem_node;
- } else {
- p_mem_node->next = func->p_mem_head;
- func->p_mem_head = p_mem_node;
- }
- }
-
- /*
- * If we've got a valid bus number, use it
- * The second condition is to ignore bus numbers on
- * populated slots that don't have PCI-PCI bridges
- */
- if (secondary_bus && (secondary_bus != primary_bus)) {
- bus_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!bus_node)
- return -ENOMEM;
-
- bus_node->base = (ulong)secondary_bus;
- bus_node->length = (ulong)(max_bus - secondary_bus + 1);
- dbg("found bus_node(base, length) = %x, %x\n", bus_node->base, bus_node->length);
-
- if (!populated_slot) {
- bus_node->next = ctrl->bus_head;
- ctrl->bus_head = bus_node;
- } else {
- bus_node->next = func->bus_head;
- func->bus_head = bus_node;
- }
- }
-
- i--;
- one_slot += sizeof(struct slot_rt);
- }
-
- /* If all of the following fail, we don't have any resources for hot plug add */
- rc = 1;
- rc &= shpchp_resource_sort_and_combine(&(ctrl->mem_head));
- rc &= shpchp_resource_sort_and_combine(&(ctrl->p_mem_head));
- rc &= shpchp_resource_sort_and_combine(&(ctrl->io_head));
- rc &= shpchp_resource_sort_and_combine(&(ctrl->bus_head));
-
- return (rc);
+ return;
}
-int shpchprm_set_hpp(
- struct controller *ctrl,
- struct pci_func *func,
- u8 card_type)
-{
- u32 rc;
- u8 temp_byte;
- struct pci_bus lpci_bus, *pci_bus;
- unsigned int devfn;
- memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- temp_byte = 0x40; /* hard coded value for LT */
- if (card_type == PCI_HEADER_TYPE_BRIDGE) {
- /* set subordinate Latency Timer */
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte);
- if (rc) {
- dbg("%s: set secondary LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus,
- func->device, func->function);
- return rc;
- }
- }
-
- /* set base Latency Timer */
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte);
- if (rc) {
- dbg("%s: set LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function);
- return rc;
- }
-
- /* set Cache Line size */
- temp_byte = 0x08; /* hard coded value for CLS */
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte);
- if (rc) {
- dbg("%s: set CLS error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function);
- }
-
- /* set enable_perr */
- /* set enable_serr */
-
- return rc;
-}
-
-void shpchprm_enable_card(
- struct controller *ctrl,
- struct pci_func *func,
- u8 card_type)
-{
- u16 command, bcommand;
- struct pci_bus lpci_bus, *pci_bus;
- unsigned int devfn;
- int rc;
-
- memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command);
- command |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR
- | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
- | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
-
- if (card_type == PCI_HEADER_TYPE_BRIDGE) {
- rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand);
- bcommand |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR
- | PCI_BRIDGE_CTL_NO_ISA;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand);
- }
-}
-
-static int legacy_shpchprm_init_pci(void)
-{
- shpchp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
- if (!shpchp_rom_start) {
- err("Could not ioremap memory region for ROM\n");
- return -EIO;
- }
-
- return 0;
-}
-
-int shpchprm_init(enum php_ctlr_type ctrl_type)
-{
- int retval;
-
- switch (ctrl_type) {
- case PCI:
- retval = legacy_shpchprm_init_pci();
- break;
- default:
- retval = -ENODEV;
- break;
- }
-
- return retval;
-}
diff --git a/drivers/pci/hotplug/shpchprm_legacy.h b/drivers/pci/hotplug/shpchprm_legacy.h
deleted file mode 100644
index 21bda74..0000000
--- a/drivers/pci/hotplug/shpchprm_legacy.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * SHPCHPRM Legacy: PHP Resource Manager for Non-ACPI/Legacy platform using HRT
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
- *
- */
-
-#ifndef _SHPCHPRM_LEGACY_H_
-#define _SHPCHPRM_LEGACY_H_
-
-#define ROM_PHY_ADDR 0x0F0000
-#define ROM_PHY_LEN 0x00FFFF
-
-struct slot_rt {
- u8 dev_func;
- u8 primary_bus;
- u8 secondary_bus;
- u8 max_bus;
- u16 io_base;
- u16 io_length;
- u16 mem_base;
- u16 mem_length;
- u16 pre_mem_base;
- u16 pre_mem_length;
-} __attribute__ ((packed));
-
-/* offsets to the hotplug slot resource table registers based on the above structure layout */
-enum slot_rt_offsets {
- DEV_FUNC = offsetof(struct slot_rt, dev_func),
- PRIMARY_BUS = offsetof(struct slot_rt, primary_bus),
- SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus),
- MAX_BUS = offsetof(struct slot_rt, max_bus),
- IO_BASE = offsetof(struct slot_rt, io_base),
- IO_LENGTH = offsetof(struct slot_rt, io_length),
- MEM_BASE = offsetof(struct slot_rt, mem_base),
- MEM_LENGTH = offsetof(struct slot_rt, mem_length),
- PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base),
- PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length),
-};
-
-struct hrt {
- char sig0;
- char sig1;
- char sig2;
- char sig3;
- u16 unused_IRQ;
- u16 PCIIRQ;
- u8 number_of_entries;
- u8 revision;
- u16 reserved1;
- u32 reserved2;
-} __attribute__ ((packed));
-
-/* offsets to the hotplug resource table registers based on the above structure layout */
-enum hrt_offsets {
- SIG0 = offsetof(struct hrt, sig0),
- SIG1 = offsetof(struct hrt, sig1),
- SIG2 = offsetof(struct hrt, sig2),
- SIG3 = offsetof(struct hrt, sig3),
- UNUSED_IRQ = offsetof(struct hrt, unused_IRQ),
- PCIIRQ = offsetof(struct hrt, PCIIRQ),
- NUMBER_OF_ENTRIES = offsetof(struct hrt, number_of_entries),
- REVISION = offsetof(struct hrt, revision),
- HRT_RESERVED1 = offsetof(struct hrt, reserved1),
- HRT_RESERVED2 = offsetof(struct hrt, reserved2),
-};
-
-struct irq_info {
- u8 bus, devfn; /* bus, device and function */
- struct {
- u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
- u16 bitmap; /* Available IRQs */
- } __attribute__ ((packed)) irq[4];
- u8 slot; /* slot number, 0=onboard */
- u8 rfu;
-} __attribute__ ((packed));
-
-struct irq_routing_table {
- u32 signature; /* PIRQ_SIGNATURE should be here */
- u16 version; /* PIRQ_VERSION */
- u16 size; /* Table size in bytes */
- u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
- u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
- u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
- u32 miniport_data; /* Crap */
- u8 rfu[11];
- u8 checksum; /* Modulo 256 checksum must give zero */
- struct irq_info slots[0];
-} __attribute__ ((packed));
-
-#endif /* _SHPCHPRM_LEGACY_H_ */
diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c
index 5f75ef7..c6b4099 100644
--- a/drivers/pci/hotplug/shpchprm_nonacpi.c
+++ b/drivers/pci/hotplug/shpchprm_nonacpi.c
@@ -32,24 +32,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#ifdef CONFIG_IA64
-#include <asm/iosapic.h>
-#endif
+#include <linux/slab.h>
+
#include "shpchp.h"
-#include "shpchprm.h"
-#include "shpchprm_nonacpi.h"
-
-void shpchprm_cleanup(void)
-{
- return;
-}
-
-int shpchprm_print_pirt(void)
-{
- return 0;
-}
int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
{
@@ -60,375 +45,13 @@
return 0;
}
-static void print_pci_resource ( struct pci_resource *aprh)
+void get_hp_params_from_firmware(struct pci_dev *dev,
+ struct hotplug_params *hpp)
{
- struct pci_resource *res;
-
- for (res = aprh; res; res = res->next)
- dbg(" base= 0x%x length= 0x%x\n", res->base, res->length);
+ return;
}
-
-static void phprm_dump_func_res( struct pci_func *fun)
+void get_hp_hw_control_from_firmware(struct pci_dev *dev)
{
- struct pci_func *func = fun;
-
- if (func->bus_head) {
- dbg(": BUS Resources:\n");
- print_pci_resource (func->bus_head);
- }
- if (func->io_head) {
- dbg(": IO Resources:\n");
- print_pci_resource (func->io_head);
- }
- if (func->mem_head) {
- dbg(": MEM Resources:\n");
- print_pci_resource (func->mem_head);
- }
- if (func->p_mem_head) {
- dbg(": PMEM Resources:\n");
- print_pci_resource (func->p_mem_head);
- }
-}
-
-static int phprm_get_used_resources (
- struct controller *ctrl,
- struct pci_func *func
- )
-{
- return shpchp_save_used_resources (ctrl, func, !DISABLE_CARD);
-}
-
-static int phprm_delete_resource(
- struct pci_resource **aprh,
- ulong base,
- ulong size)
-{
- struct pci_resource *res;
- struct pci_resource *prevnode;
- struct pci_resource *split_node;
- ulong tbase;
-
- shpchp_resource_sort_and_combine(aprh);
-
- for (res = *aprh; res; res = res->next) {
- if (res->base > base)
- continue;
-
- if ((res->base + res->length) < (base + size))
- continue;
-
- if (res->base < base) {
- tbase = base;
-
- if ((res->length - (tbase - res->base)) < size)
- continue;
-
- split_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!split_node)
- return -ENOMEM;
-
- split_node->base = res->base;
- split_node->length = tbase - res->base;
- res->base = tbase;
- res->length -= split_node->length;
-
- split_node->next = res->next;
- res->next = split_node;
- }
-
- if (res->length >= size) {
- split_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
- if (!split_node)
- return -ENOMEM;
-
- split_node->base = res->base + size;
- split_node->length = res->length - size;
- res->length = size;
-
- split_node->next = res->next;
- res->next = split_node;
- }
-
- if (*aprh == res) {
- *aprh = res->next;
- } else {
- prevnode = *aprh;
- while (prevnode->next != res)
- prevnode = prevnode->next;
-
- prevnode->next = res->next;
- }
- res->next = NULL;
- kfree(res);
- break;
- }
-
- return 0;
-}
-
-
-static int phprm_delete_resources(
- struct pci_resource **aprh,
- struct pci_resource *this
- )
-{
- struct pci_resource *res;
-
- for (res = this; res; res = res->next)
- phprm_delete_resource(aprh, res->base, res->length);
-
- return 0;
-}
-
-
-static int configure_existing_function(
- struct controller *ctrl,
- struct pci_func *func
- )
-{
- int rc;
-
- /* see how much resources the func has used. */
- rc = phprm_get_used_resources (ctrl, func);
-
- if (!rc) {
- /* subtract the resources used by the func from ctrl resources */
- rc = phprm_delete_resources (&ctrl->bus_head, func->bus_head);
- rc |= phprm_delete_resources (&ctrl->io_head, func->io_head);
- rc |= phprm_delete_resources (&ctrl->mem_head, func->mem_head);
- rc |= phprm_delete_resources (&ctrl->p_mem_head, func->p_mem_head);
- if (rc)
- warn("aCEF: cannot del used resources\n");
- } else
- err("aCEF: cannot get used resources\n");
-
- return rc;
-}
-
-static int bind_pci_resources_to_slots ( struct controller *ctrl)
-{
- struct pci_func *func, new_func;
- int busn = ctrl->slot_bus;
- int devn, funn;
- u32 vid;
-
- for (devn = 0; devn < 32; devn++) {
- for (funn = 0; funn < 8; funn++) {
- /*
- if (devn == ctrl->device && funn == ctrl->function)
- continue;
- */
- /* find out if this entry is for an occupied slot */
- vid = 0xFFFFFFFF;
-
- pci_bus_read_config_dword(ctrl->pci_dev->subordinate, PCI_DEVFN(devn, funn), PCI_VENDOR_ID, &vid);
-
- if (vid != 0xFFFFFFFF) {
- func = shpchp_slot_find(busn, devn, funn);
- if (!func) {
- memset(&new_func, 0, sizeof(struct pci_func));
- new_func.bus = busn;
- new_func.device = devn;
- new_func.function = funn;
- new_func.is_a_board = 1;
- configure_existing_function(ctrl, &new_func);
- phprm_dump_func_res(&new_func);
- } else {
- configure_existing_function(ctrl, func);
- phprm_dump_func_res(func);
- }
- dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
- }
- }
- }
-
- return 0;
-}
-
-static void phprm_dump_ctrl_res( struct controller *ctlr)
-{
- struct controller *ctrl = ctlr;
-
- if (ctrl->bus_head) {
- dbg(": BUS Resources:\n");
- print_pci_resource (ctrl->bus_head);
- }
- if (ctrl->io_head) {
- dbg(": IO Resources:\n");
- print_pci_resource (ctrl->io_head);
- }
- if (ctrl->mem_head) {
- dbg(": MEM Resources:\n");
- print_pci_resource (ctrl->mem_head);
- }
- if (ctrl->p_mem_head) {
- dbg(": PMEM Resources:\n");
- print_pci_resource (ctrl->p_mem_head);
- }
-}
-
-/*
- * phprm_find_available_resources
- *
- * Finds available memory, IO, and IRQ resources for programming
- * devices which may be added to the system
- * this function is for hot plug ADD!
- *
- * returns 0 if success
- */
-int shpchprm_find_available_resources(struct controller *ctrl)
-{
- struct pci_func func;
- u32 rc;
-
- memset(&func, 0, sizeof(struct pci_func));
-
- func.bus = ctrl->bus;
- func.device = ctrl->device;
- func.function = ctrl->function;
- func.is_a_board = 1;
-
- /* Get resources for this PCI bridge */
- rc = shpchp_save_used_resources (ctrl, &func, !DISABLE_CARD);
- dbg("%s: shpchp_save_used_resources rc = %d\n", __FUNCTION__, rc);
-
- if (func.mem_head)
- func.mem_head->next = ctrl->mem_head;
- ctrl->mem_head = func.mem_head;
-
- if (func.p_mem_head)
- func.p_mem_head->next = ctrl->p_mem_head;
- ctrl->p_mem_head = func.p_mem_head;
-
- if (func.io_head)
- func.io_head->next = ctrl->io_head;
- ctrl->io_head = func.io_head;
-
- if(func.bus_head)
- func.bus_head->next = ctrl->bus_head;
- ctrl->bus_head = func.bus_head;
- if (ctrl->bus_head)
- phprm_delete_resource(&ctrl->bus_head, ctrl->pci_dev->subordinate->number, 1);
-
- dbg("%s:pre-Bind PCI 0x%x Ctrl Resource Dump\n", __FUNCTION__, ctrl->bus);
- phprm_dump_ctrl_res(ctrl);
- bind_pci_resources_to_slots (ctrl);
-
- dbg("%s:post-Bind PCI 0x%x Ctrl Resource Dump\n", __FUNCTION__, ctrl->bus);
- phprm_dump_ctrl_res(ctrl);
-
-
- /* If all of the following fail, we don't have any resources for hot plug add */
- rc = 1;
- rc &= shpchp_resource_sort_and_combine(&(ctrl->mem_head));
- rc &= shpchp_resource_sort_and_combine(&(ctrl->p_mem_head));
- rc &= shpchp_resource_sort_and_combine(&(ctrl->io_head));
- rc &= shpchp_resource_sort_and_combine(&(ctrl->bus_head));
-
- return (rc);
-}
-
-int shpchprm_set_hpp(
- struct controller *ctrl,
- struct pci_func *func,
- u8 card_type)
-{
- u32 rc;
- u8 temp_byte;
- struct pci_bus lpci_bus, *pci_bus;
- unsigned int devfn;
- memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- temp_byte = 0x40; /* hard coded value for LT */
- if (card_type == PCI_HEADER_TYPE_BRIDGE) {
- /* set subordinate Latency Timer */
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte);
-
- if (rc) {
- dbg("%s: set secondary LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus,
- func->device, func->function);
- return rc;
- }
- }
-
- /* set base Latency Timer */
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte);
-
- if (rc) {
- dbg("%s: set LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function);
- return rc;
- }
-
- /* set Cache Line size */
- temp_byte = 0x08; /* hard coded value for CLS */
-
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte);
-
- if (rc) {
- dbg("%s: set CLS error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function);
- }
-
- /* set enable_perr */
- /* set enable_serr */
-
- return rc;
-}
-
-void shpchprm_enable_card(
- struct controller *ctrl,
- struct pci_func *func,
- u8 card_type)
-{
- u16 command, bcommand;
- struct pci_bus lpci_bus, *pci_bus;
- unsigned int devfn;
- int rc;
-
- memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus));
- pci_bus = &lpci_bus;
- pci_bus->number = func->bus;
- devfn = PCI_DEVFN(func->device, func->function);
-
- rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command);
-
- command |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR
- | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
- | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
-
- if (card_type == PCI_HEADER_TYPE_BRIDGE) {
-
- rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand);
-
- bcommand |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR
- | PCI_BRIDGE_CTL_NO_ISA;
-
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand);
- }
-}
-
-static int legacy_shpchprm_init_pci(void)
-{
- return 0;
-}
-
-int shpchprm_init(enum php_ctlr_type ctrl_type)
-{
- int retval;
-
- switch (ctrl_type) {
- case PCI:
- retval = legacy_shpchprm_init_pci();
- break;
- default:
- retval = -ENODEV;
- break;
- }
-
- return retval;
+ return;
}
diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.h b/drivers/pci/hotplug/shpchprm_nonacpi.h
deleted file mode 100644
index cddaaa5..0000000
--- a/drivers/pci/hotplug/shpchprm_nonacpi.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * SHPCHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
- *
- */
-
-#ifndef _SHPCHPRM_NONACPI_H_
-#define _SHPCHPRM_NONACPI_H_
-
-struct irq_info {
- u8 bus, devfn; /* bus, device and function */
- struct {
- u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
- u16 bitmap; /* Available IRQs */
- } __attribute__ ((packed)) irq[4];
- u8 slot; /* slot number, 0=onboard */
- u8 rfu;
-} __attribute__ ((packed));
-
-struct irq_routing_table {
- u32 signature; /* PIRQ_SIGNATURE should be here */
- u16 version; /* PIRQ_VERSION */
- u16 size; /* Table size in bytes */
- u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
- u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
- u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
- u32 miniport_data; /* Crap */
- u8 rfu[11];
- u8 checksum; /* Modulo 256 checksum must give zero */
- struct irq_info slots[0];
-} __attribute__ ((packed));
-
-#endif /* _SHPCHPRM_NONACPI_H_ */
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index ee8677b..a203355 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -575,6 +575,8 @@
/**
* msix_capability_init - configure device's MSI-X capability
* @dev: pointer to the pci_dev data structure of MSI-X device function
+ * @entries: pointer to an array of struct msix_entry entries
+ * @nvec: number of @entries
*
* Setup the MSI-X capability structure of device function with a
* single MSI-X vector. A return of zero indicates the successful setup of
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 0d0d533..ae986e5 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -8,6 +8,8 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/mempolicy.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include "pci.h"
/*
@@ -26,7 +28,10 @@
#ifdef CONFIG_HOTPLUG
/**
- * store_new_id
+ * store_new_id - add a new PCI device ID to this driver and re-probe devices
+ * @driver: target device driver
+ * @buf: buffer for scanning device ID data
+ * @count: input size
*
* Adds a new dynamic pci device ID to this driver,
* and causes the driver to probe for all devices again.
@@ -194,8 +199,10 @@
/**
* __pci_device_probe()
+ * @drv: driver to call to check if it wants the PCI device
+ * @pci_dev: PCI device being probed
*
- * returns 0 on success, else error.
+ * returns 0 on success, else error.
* side-effect: pci_dev->driver is set to drv when drv claims pci_dev.
*/
static int
@@ -377,6 +384,10 @@
* the pci shutdown function, this test can go away. */
if (!drv->driver.shutdown)
drv->driver.shutdown = pci_device_shutdown;
+ else
+ printk(KERN_WARNING "Warning: PCI driver %s has a struct "
+ "device_driver shutdown method, please update!\n",
+ drv->name);
drv->driver.owner = drv->owner;
drv->driver.kobj.ktype = &pci_driver_kobj_type;
@@ -436,11 +447,11 @@
/**
* pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure
- * @ids: array of PCI device id structures to search in
* @dev: the PCI device structure to match against
+ * @drv: the device driver to search for matching PCI device id structures
*
* Used by a driver to check whether a PCI device present in the
- * system is in its list of supported devices.Returns the matching
+ * system is in its list of supported devices. Returns the matching
* pci_device_id structure or %NULL if there is no match.
*/
static int pci_bus_match(struct device *dev, struct device_driver *drv)
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 2898830..965a593 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -130,7 +130,7 @@
if ((off & 1) && size) {
u8 val;
- pci_read_config_byte(dev, off, &val);
+ pci_user_read_config_byte(dev, off, &val);
data[off - init_off] = val;
off++;
size--;
@@ -138,7 +138,7 @@
if ((off & 3) && size > 2) {
u16 val;
- pci_read_config_word(dev, off, &val);
+ pci_user_read_config_word(dev, off, &val);
data[off - init_off] = val & 0xff;
data[off - init_off + 1] = (val >> 8) & 0xff;
off += 2;
@@ -147,7 +147,7 @@
while (size > 3) {
u32 val;
- pci_read_config_dword(dev, off, &val);
+ pci_user_read_config_dword(dev, off, &val);
data[off - init_off] = val & 0xff;
data[off - init_off + 1] = (val >> 8) & 0xff;
data[off - init_off + 2] = (val >> 16) & 0xff;
@@ -158,7 +158,7 @@
if (size >= 2) {
u16 val;
- pci_read_config_word(dev, off, &val);
+ pci_user_read_config_word(dev, off, &val);
data[off - init_off] = val & 0xff;
data[off - init_off + 1] = (val >> 8) & 0xff;
off += 2;
@@ -167,7 +167,7 @@
if (size > 0) {
u8 val;
- pci_read_config_byte(dev, off, &val);
+ pci_user_read_config_byte(dev, off, &val);
data[off - init_off] = val;
off++;
--size;
@@ -192,7 +192,7 @@
}
if ((off & 1) && size) {
- pci_write_config_byte(dev, off, data[off - init_off]);
+ pci_user_write_config_byte(dev, off, data[off - init_off]);
off++;
size--;
}
@@ -200,7 +200,7 @@
if ((off & 3) && size > 2) {
u16 val = data[off - init_off];
val |= (u16) data[off - init_off + 1] << 8;
- pci_write_config_word(dev, off, val);
+ pci_user_write_config_word(dev, off, val);
off += 2;
size -= 2;
}
@@ -210,7 +210,7 @@
val |= (u32) data[off - init_off + 1] << 8;
val |= (u32) data[off - init_off + 2] << 16;
val |= (u32) data[off - init_off + 3] << 24;
- pci_write_config_dword(dev, off, val);
+ pci_user_write_config_dword(dev, off, val);
off += 4;
size -= 4;
}
@@ -218,13 +218,13 @@
if (size >= 2) {
u16 val = data[off - init_off];
val |= (u16) data[off - init_off + 1] << 8;
- pci_write_config_word(dev, off, val);
+ pci_user_write_config_word(dev, off, val);
off += 2;
size -= 2;
}
if (size) {
- pci_write_config_byte(dev, off, data[off - init_off]);
+ pci_user_write_config_byte(dev, off, data[off - init_off]);
off++;
--size;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 259d247..e74d758 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -15,6 +15,7 @@
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/string.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
@@ -252,6 +253,8 @@
pci_update_resource(dev, &dev->resource[i], i);
}
+int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
+
/**
* pci_set_power_state - Set the power state of a PCI device
* @dev: PCI device to be suspended
@@ -266,7 +269,6 @@
* -EIO if device does not support PCI PM.
* 0 if we can successfully change the power state.
*/
-int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
int
pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
@@ -314,19 +316,19 @@
* sets PowerState to 0.
*/
switch (dev->current_state) {
+ case PCI_D0:
+ case PCI_D1:
+ case PCI_D2:
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= state;
+ break;
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
need_restore = 1;
/* Fall-through: force to D0 */
- case PCI_D3hot:
- case PCI_D3cold:
- case PCI_POWER_ERROR:
- pmcsr = 0;
- break;
default:
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= state;
+ pmcsr = 0;
break;
}
@@ -808,8 +810,8 @@
/**
* pci_intx - enables/disables PCI INTx for device dev
- * @dev: the PCI device to operate on
- * @enable: boolean
+ * @pdev: the PCI device to operate on
+ * @enable: boolean: whether to enable or disable PCI INTx
*
* Enables/disables PCI INTx for device dev
*/
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index d3f3dd4..6527b36 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -15,6 +15,13 @@
extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state);
+extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
+extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
+extern int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
+extern int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
+extern int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
+extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
+
/* PCI /proc functions */
#ifdef CONFIG_PROC_FS
extern int pci_proc_attach_device(struct pci_dev *dev);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 393e0ce..467a4ce 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -11,6 +11,8 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/pcieport_if.h>
#include "portdrv.h"
@@ -61,7 +63,7 @@
static void pcie_port_shutdown_service(struct device *dev) {}
-static int pcie_port_suspend_service(struct device *dev, pm_message_t state, u32 level)
+static int pcie_port_suspend_service(struct device *dev, pm_message_t state)
{
struct pcie_device *pciedev;
struct pcie_port_service_driver *driver;
@@ -76,7 +78,7 @@
return 0;
}
-static int pcie_port_resume_service(struct device *dev, u32 level)
+static int pcie_port_resume_service(struct device *dev)
{
struct pcie_device *pciedev;
struct pcie_port_service_driver *driver;
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 3c565ce..0226014 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -12,6 +12,7 @@
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/pcieport_if.h>
#include "portdrv.h"
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 0057864..fce2cb2 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -669,6 +669,7 @@
/**
* pci_cfg_space_size - get the configuration space size of the PCI device.
+ * @dev: PCI device
*
* Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
* have 4096 bytes. Even if the device is capable, that doesn't mean we can
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 9613f66..9eb4657 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -80,7 +80,7 @@
if ((pos & 1) && cnt) {
unsigned char val;
- pci_read_config_byte(dev, pos, &val);
+ pci_user_read_config_byte(dev, pos, &val);
__put_user(val, buf);
buf++;
pos++;
@@ -89,7 +89,7 @@
if ((pos & 3) && cnt > 2) {
unsigned short val;
- pci_read_config_word(dev, pos, &val);
+ pci_user_read_config_word(dev, pos, &val);
__put_user(cpu_to_le16(val), (unsigned short __user *) buf);
buf += 2;
pos += 2;
@@ -98,7 +98,7 @@
while (cnt >= 4) {
unsigned int val;
- pci_read_config_dword(dev, pos, &val);
+ pci_user_read_config_dword(dev, pos, &val);
__put_user(cpu_to_le32(val), (unsigned int __user *) buf);
buf += 4;
pos += 4;
@@ -107,7 +107,7 @@
if (cnt >= 2) {
unsigned short val;
- pci_read_config_word(dev, pos, &val);
+ pci_user_read_config_word(dev, pos, &val);
__put_user(cpu_to_le16(val), (unsigned short __user *) buf);
buf += 2;
pos += 2;
@@ -116,7 +116,7 @@
if (cnt) {
unsigned char val;
- pci_read_config_byte(dev, pos, &val);
+ pci_user_read_config_byte(dev, pos, &val);
__put_user(val, buf);
buf++;
pos++;
@@ -151,7 +151,7 @@
if ((pos & 1) && cnt) {
unsigned char val;
__get_user(val, buf);
- pci_write_config_byte(dev, pos, val);
+ pci_user_write_config_byte(dev, pos, val);
buf++;
pos++;
cnt--;
@@ -160,7 +160,7 @@
if ((pos & 3) && cnt > 2) {
unsigned short val;
__get_user(val, (unsigned short __user *) buf);
- pci_write_config_word(dev, pos, le16_to_cpu(val));
+ pci_user_write_config_word(dev, pos, le16_to_cpu(val));
buf += 2;
pos += 2;
cnt -= 2;
@@ -169,7 +169,7 @@
while (cnt >= 4) {
unsigned int val;
__get_user(val, (unsigned int __user *) buf);
- pci_write_config_dword(dev, pos, le32_to_cpu(val));
+ pci_user_write_config_dword(dev, pos, le32_to_cpu(val));
buf += 4;
pos += 4;
cnt -= 4;
@@ -178,7 +178,7 @@
if (cnt >= 2) {
unsigned short val;
__get_user(val, (unsigned short __user *) buf);
- pci_write_config_word(dev, pos, le16_to_cpu(val));
+ pci_user_write_config_word(dev, pos, le16_to_cpu(val));
buf += 2;
pos += 2;
cnt -= 2;
@@ -187,7 +187,7 @@
if (cnt) {
unsigned char val;
__get_user(val, buf);
- pci_write_config_byte(dev, pos, val);
+ pci_user_write_config_byte(dev, pos, val);
buf++;
pos++;
cnt--;
@@ -484,10 +484,10 @@
drv = pci_dev_driver(dev);
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- pci_read_config_byte (dev, PCI_LATENCY_TIMER, &latency);
- pci_read_config_byte (dev, PCI_MIN_GNT, &min_gnt);
- pci_read_config_byte (dev, PCI_MAX_LAT, &max_lat);
+ pci_user_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
+ pci_user_read_config_byte (dev, PCI_LATENCY_TIMER, &latency);
+ pci_user_read_config_byte (dev, PCI_MIN_GNT, &min_gnt);
+ pci_user_read_config_byte (dev, PCI_MAX_LAT, &max_lat);
seq_printf(m, " Bus %2d, device %3d, function %2d:\n",
dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
seq_printf(m, " Class %04x", class_rev >> 16);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7992bc8..5627ce1 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -7,6 +7,9 @@
*
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
*
+ * Init/reset quirks for USB host controllers should be in the
+ * USB quirks file, where their drivers can access reuse it.
+ *
* The bridge optimization stuff has been removed. If you really
* have a silly BIOS which is unable to set your host bridge right,
* use the PowerTweak utility (see http://powertweak.sourceforge.net).
@@ -353,7 +356,7 @@
/*
* PIIX4 ACPI: Two IO regions pointed to by longwords at
* 0x40 (64 bytes of ACPI registers)
- * 0x90 (32 bytes of SMB registers)
+ * 0x90 (16 bytes of SMB registers)
* and a few strange programmable PIIX4 device resources.
*/
static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
@@ -363,7 +366,7 @@
pci_read_config_dword(dev, 0x40, ®ion);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
pci_read_config_dword(dev, 0x90, ®ion);
- quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
+ quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
/* Device resource A has enables for some of the other ones */
pci_read_config_dword(dev, 0x5c, &res_a);
@@ -414,6 +417,18 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi );
+static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev)
+{
+ u32 region;
+
+ pci_read_config_dword(dev, 0x40, ®ion);
+ quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO");
+
+ pci_read_config_dword(dev, 0x48, ®ion);
+ quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi );
+
/*
* VIA ACPI: One IO region pointed to by longword at
* 0x48 or 0x20 (256 bytes of ACPI registers)
@@ -633,28 +648,6 @@
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
/*
- * PIIX3 USB: We have to disable USB interrupts that are
- * hardwired to PIRQD# and may be shared with an
- * external device.
- *
- * Legacy Support Register (LEGSUP):
- * bit13: USB PIRQ Enable (USBPIRQDEN),
- * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
- *
- * We mask out all r/wc bits, too.
- */
-static void __devinit quirk_piix3_usb(struct pci_dev *dev)
-{
- u16 legsup;
-
- pci_read_config_word(dev, 0xc0, &legsup);
- legsup &= 0x50ef;
- pci_write_config_word(dev, 0xc0, legsup);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
-
-/*
* VIA VT82C598 has its device ID settable and many BIOSes
* set it to the ID of VT82C597 for backward compatibility.
* We need to switch it off to be able to recognize the real
@@ -922,6 +915,12 @@
case 0x186a: /* M6Ne notebook */
asus_hides_smbus = 1;
}
+ if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
+ switch (dev->subsystem_device) {
+ case 0x1882: /* M6V notebook */
+ asus_hides_smbus = 1;
+ }
+ }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
@@ -932,6 +931,7 @@
if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
switch (dev->subsystem_device) {
case 0x12bc: /* HP D330L */
+ case 0x12bd: /* HP D530 */
asus_hides_smbus = 1;
}
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
@@ -966,6 +966,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge );
static void __init asus_hides_smbus_lpc(struct pci_dev *dev)
{
@@ -990,6 +991,23 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
+static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+{
+ u32 val, rcba;
+ void __iomem *base;
+
+ if (likely(!asus_hides_smbus))
+ return;
+ pci_read_config_dword(dev, 0xF0, &rcba);
+ base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */
+ if (base == NULL) return;
+ val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */
+ writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */
+ iounmap(base);
+ printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
+
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
*/
@@ -1002,234 +1020,6 @@
pci_read_config_byte(dev, 0x77, &val);
}
-
-#define UHCI_USBLEGSUP 0xc0 /* legacy support */
-#define UHCI_USBCMD 0 /* command register */
-#define UHCI_USBSTS 2 /* status register */
-#define UHCI_USBINTR 4 /* interrupt register */
-#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
-#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
-#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
-#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
-
-#define OHCI_CONTROL 0x04
-#define OHCI_CMDSTATUS 0x08
-#define OHCI_INTRSTATUS 0x0c
-#define OHCI_INTRENABLE 0x10
-#define OHCI_INTRDISABLE 0x14
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-
-#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
-#define EHCI_USBCMD 0 /* command register */
-#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define EHCI_USBSTS 4 /* status register */
-#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
-#define EHCI_USBINTR 8 /* interrupt register */
-#define EHCI_USBLEGSUP 0 /* legacy support register */
-#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
-#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
-#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
-#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
-
-int usb_early_handoff __devinitdata = 0;
-static int __init usb_handoff_early(char *str)
-{
- usb_early_handoff = 1;
- return 0;
-}
-__setup("usb-handoff", usb_handoff_early);
-
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
-{
- unsigned long base = 0;
- int wait_time, delta;
- u16 val, sts;
- int i;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++)
- if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
- base = pci_resource_start(pdev, i);
- break;
- }
-
- if (!base)
- return;
-
- /*
- * stop controller
- */
- sts = inw(base + UHCI_USBSTS);
- val = inw(base + UHCI_USBCMD);
- val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
- outw(val, base + UHCI_USBCMD);
-
- /*
- * wait while it stops if it was running
- */
- if ((sts & UHCI_USBSTS_HALTED) == 0)
- {
- wait_time = 1000;
- delta = 100;
-
- do {
- outw(0x1f, base + UHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = inw(base + UHCI_USBSTS);
- if (val & UHCI_USBSTS_HALTED)
- break;
- } while (wait_time > 0);
- }
-
- /*
- * disable interrupts & legacy support
- */
- outw(0, base + UHCI_USBINTR);
- outw(0x1f, base + UHCI_USBSTS);
- pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
- if (val & 0xbf)
- pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
-
-}
-
-static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
-{
- void __iomem *base;
- int wait_time;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time = 500; /* 0.5 seconds */
- writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
- writel(OHCI_OCR, base + OHCI_CMDSTATUS);
- while (wait_time > 0 &&
- readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time -= 10;
- msleep(10);
- }
- }
-
- /*
- * disable interrupts
- */
- writel(~(u32)0, base + OHCI_INTRDISABLE);
- writel(~(u32)0, base + OHCI_INTRSTATUS);
-
- iounmap(base);
-}
-
-static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
-{
- int wait_time, delta;
- void __iomem *base, *op_reg_base;
- u32 hcc_params, val, temp;
- u8 cap_length;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- cap_length = readb(base);
- op_reg_base = base + cap_length;
- hcc_params = readl(base + EHCI_HCC_PARAMS);
- hcc_params = (hcc_params >> 8) & 0xff;
- if (hcc_params) {
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
- /*
- * Ok, BIOS is in smm mode, try to hand off...
- */
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- &temp);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- temp | EHCI_USBLEGCTLSTS_SOOE);
- val |= EHCI_USBLEGSUP_OS;
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- val);
-
- wait_time = 500;
- do {
- msleep(10);
- wait_time -= 10;
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
- if (!wait_time) {
- /*
- * well, possibly buggy BIOS...
- */
- printk(KERN_WARNING "EHCI early BIOS handoff "
- "failed (BIOS bug ?)\n");
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- EHCI_USBLEGSUP_OS);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- 0);
- }
- }
- }
-
- /*
- * halt EHCI & disable its interrupts in any case
- */
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val & EHCI_USBSTS_HALTED) == 0) {
- val = readl(op_reg_base + EHCI_USBCMD);
- val &= ~EHCI_USBCMD_RUN;
- writel(val, op_reg_base + EHCI_USBCMD);
-
- wait_time = 2000;
- delta = 100;
- do {
- writel(0x3f, op_reg_base + EHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
- break;
- }
- } while (wait_time > 0);
- }
- writel(0, op_reg_base + EHCI_USBINTR);
- writel(0x3f, op_reg_base + EHCI_USBSTS);
-
- iounmap(base);
-
- return;
-}
-
-
-
-static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
-{
- if (!usb_early_handoff)
- return;
-
- if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
- quirk_usb_handoff_uhci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
- quirk_usb_handoff_ohci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
- quirk_usb_disable_ehci(pdev);
- }
-
- return;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
-
/*
* ... This is further complicated by the fact that some SiS96x south
* bridges pretend to be 85C503/5513 instead. In that case see if we
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 49bd217..598a115 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -9,6 +9,7 @@
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "pci.h"
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index c071790..87fafc0 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -13,7 +13,7 @@
#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <asm/uaccess.h>
-
+#include "pci.h"
asmlinkage long
sys_pciconfig_read(unsigned long bus, unsigned long dfn,
@@ -38,13 +38,13 @@
lock_kernel();
switch (len) {
case 1:
- cfg_ret = pci_read_config_byte(dev, off, &byte);
+ cfg_ret = pci_user_read_config_byte(dev, off, &byte);
break;
case 2:
- cfg_ret = pci_read_config_word(dev, off, &word);
+ cfg_ret = pci_user_read_config_word(dev, off, &word);
break;
case 4:
- cfg_ret = pci_read_config_dword(dev, off, &dword);
+ cfg_ret = pci_user_read_config_dword(dev, off, &dword);
break;
default:
err = -EINVAL;
@@ -112,7 +112,7 @@
err = get_user(byte, (u8 __user *)buf);
if (err)
break;
- err = pci_write_config_byte(dev, off, byte);
+ err = pci_user_write_config_byte(dev, off, byte);
if (err != PCIBIOS_SUCCESSFUL)
err = -EIO;
break;
@@ -121,7 +121,7 @@
err = get_user(word, (u16 __user *)buf);
if (err)
break;
- err = pci_write_config_word(dev, off, word);
+ err = pci_user_write_config_word(dev, off, word);
if (err != PCIBIOS_SUCCESSFUL)
err = -EIO;
break;
@@ -130,7 +130,7 @@
err = get_user(dword, (u32 __user *)buf);
if (err)
break;
- err = pci_write_config_dword(dev, off, dword);
+ err = pci_user_write_config_dword(dev, off, dword);
if (err != PCIBIOS_SUCCESSFUL)
err = -EIO;
break;
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index cb4861d..fe37541 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -43,9 +43,11 @@
au1x00_ss-y += au1000_generic.o
au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
+au1x00_ss-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
+au1x00_ss-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
@@ -58,6 +60,7 @@
sa1100_cs-y += sa1100_generic.o
sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o
sa1100_cs-$(CONFIG_SA1100_CERF) += sa1100_cerf.o
+sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o
sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o
sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o
sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index 42cf8bf..24cfee1 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -40,7 +40,15 @@
#include <asm/irq.h>
#include <asm/signal.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/db1x00.h>
+
+#if defined(CONFIG_MIPS_DB1200)
+ #include <db1200.h>
+#elif defined(CONFIG_MIPS_PB1200)
+ #include <pb1200.h>
+#else
+ #include <asm/mach-db1x00/db1x00.h>
+ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+#endif
#include "au1000_generic.h"
@@ -50,7 +58,6 @@
#define debug(x,args...)
#endif
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
@@ -59,6 +66,8 @@
{
#ifdef CONFIG_MIPS_DB1550
skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
+#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
#else
skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
#endif
@@ -85,11 +94,19 @@
switch (skt->nr) {
case 0:
vs = bcsr->status & 0x3;
+#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ inserted = BOARD_CARD_INSERTED(0);
+#else
inserted = !(bcsr->status & (1<<4));
+#endif
break;
case 1:
vs = (bcsr->status & 0xC)>>2;
+#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+ inserted = BOARD_CARD_INSERTED(1);
+#else
inserted = !(bcsr->status & (1<<5));
+#endif
break;
default:/* should never happen */
return;
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 470ef75..ba48cef 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -490,7 +490,7 @@
flush_scheduled_work();
skt->ops->hw_shutdown(skt);
au1x00_pcmcia_config_skt(skt, &dead_socket);
- iounmap(skt->virt_io);
+ iounmap(skt->virt_io + (u32)mips_io_port_base);
skt->virt_io = NULL;
}
@@ -519,36 +519,15 @@
}
-static int au1x00_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int au1x00_drv_pcmcia_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
-
static struct device_driver au1x00_pcmcia_driver = {
.probe = au1x00_drv_pcmcia_probe,
.remove = au1x00_drv_pcmcia_remove,
.name = "au1x00-pcmcia",
.bus = &platform_bus_type,
- .suspend = au1x00_drv_pcmcia_suspend,
- .resume = au1x00_drv_pcmcia_resume
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
-static struct platform_device au1x00_device = {
- .name = "au1x00-pcmcia",
- .id = 0,
-};
/* au1x00_pcmcia_init()
*
@@ -562,7 +541,6 @@
int error = 0;
if ((error = driver_register(&au1x00_pcmcia_driver)))
return error;
- platform_device_register(&au1x00_device);
return error;
}
@@ -573,7 +551,6 @@
static void __exit au1x00_pcmcia_exit(void)
{
driver_unregister(&au1x00_pcmcia_driver);
- platform_device_unregister(&au1x00_device);
}
module_init(au1x00_pcmcia_init);
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
index d5122b1..b0e7908 100644
--- a/drivers/pcmcia/au1000_generic.h
+++ b/drivers/pcmcia/au1000_generic.h
@@ -44,13 +44,13 @@
/* pcmcia socket 1 needs external glue logic so the memory map
* differs from board to board.
*/
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_PB1200)
#define AU1X_SOCK1_IO 0xF08000000
#define AU1X_SOCK1_PHYS_ATTR 0xF48000000
#define AU1X_SOCK1_PHYS_MEM 0xF88000000
#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || defined(CONFIG_MIPS_DB1200)
#define AU1X_SOCK1_IO 0xF04000000
#define AU1X_SOCK1_PHYS_ATTR 0xF44000000
#define AU1X_SOCK1_PHYS_MEM 0xF84000000
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 080608c..39d096b 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -1157,7 +1157,8 @@
.requery = pcmcia_bus_rescan,
};
-static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev)
+static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct pcmcia_socket *socket = class_get_devdata(class_dev);
int ret;
@@ -1192,7 +1193,8 @@
return 0;
}
-static void pcmcia_bus_remove_socket(struct class_device *class_dev)
+static void pcmcia_bus_remove_socket(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct pcmcia_socket *socket = class_get_devdata(class_dev);
diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c
index 316f8bc..b57a0b9 100644
--- a/drivers/pcmcia/hd64465_ss.c
+++ b/drivers/pcmcia/hd64465_ss.c
@@ -844,27 +844,11 @@
local_irq_restore(flags);
}
-static int hd64465_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int hd64465_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
static struct device_driver hd64465_driver = {
.name = "hd64465-pcmcia",
.bus = &platform_bus_type,
- .suspend = hd64465_suspend,
- .resume = hd64465_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device hd64465_device = {
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index a713015..4a41f67 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1332,27 +1332,11 @@
/*====================================================================*/
-static int i82365_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int i82365_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
static struct device_driver i82365_driver = {
.name = "i82365",
.bus = &platform_bus_type,
- .suspend = i82365_suspend,
- .resume = i82365_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device i82365_device = {
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 65f3ee3..c6ed70e 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -731,28 +731,11 @@
/*====================================================================*/
-static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int m32r_pcc_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
-
static struct device_driver pcc_driver = {
.name = "cfc",
.bus = &platform_bus_type,
- .suspend = m32r_pcc_suspend,
- .resume = m32r_pcc_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device pcc_device = {
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 7b14d7e..3397ff2 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -695,28 +695,11 @@
/*====================================================================*/
-static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int m32r_pcc_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
-
static struct device_driver pcc_driver = {
.name = "pcc",
.bus = &platform_bus_type,
- .suspend = m32r_pcc_suspend,
- .resume = m32r_pcc_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device pcc_device = {
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 94be9e5..2558c3c 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -329,27 +329,13 @@
return 0;
}
-static int omap_cf_suspend(struct device *dev, pm_message_t mesg, u32 level)
-{
- if (level != SUSPEND_SAVE_STATE)
- return 0;
- return pcmcia_socket_dev_suspend(dev, mesg);
-}
-
-static int omap_cf_resume(struct device *dev, u32 level)
-{
- if (level != RESUME_RESTORE_STATE)
- return 0;
- return pcmcia_socket_dev_resume(dev);
-}
-
static struct device_driver omap_cf_driver = {
.name = (char *) driver_name,
.bus = &platform_bus_type,
.probe = omap_cf_probe,
.remove = __devexit_p(omap_cf_remove),
- .suspend = omap_cf_suspend,
- .resume = omap_cf_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static int __init omap_cf_init(void)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 325c992..c2a12d5 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -205,32 +205,20 @@
}
EXPORT_SYMBOL(pxa2xx_drv_pcmcia_probe);
-static int pxa2xx_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxa2xx_drv_pcmcia_resume(struct device *dev)
{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
+ struct pcmcia_low_level *ops = dev->platform_data;
+ int nr = ops ? ops->nr : 0;
-static int pxa2xx_drv_pcmcia_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- {
- struct pcmcia_low_level *ops = dev->platform_data;
- int nr = ops ? ops->nr : 0;
+ MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
- MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
- ret = pcmcia_socket_dev_resume(dev);
- }
- return ret;
+ return pcmcia_socket_dev_resume(dev);
}
static struct device_driver pxa2xx_pcmcia_driver = {
.probe = pxa2xx_drv_pcmcia_probe,
.remove = soc_common_drv_pcmcia_remove,
- .suspend = pxa2xx_drv_pcmcia_suspend,
+ .suspend = pcmcia_socket_dev_suspend,
.resume = pxa2xx_drv_pcmcia_resume,
.name = "pxa2xx-pcmcia",
.bus = &platform_bus_type,
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index a1178a6..bd92433 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -18,10 +18,15 @@
#include <linux/interrupt.h>
#include <linux/device.h>
+#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
+#ifdef CONFIG_SA1100_COLLIE
+#include <asm/arch-sa1100/collie.h>
+#else
+#include <asm/arch-pxa/pxa-regs.h>
+#endif
#include "soc_common.h"
@@ -38,6 +43,7 @@
{
int ret;
+#ifndef CONFIG_SA1100_COLLIE
/*
* Setup default state of GPIO outputs
* before we enable them as outputs.
@@ -60,6 +66,7 @@
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
+#endif
/* Register interrupts */
if (scoop_devs[skt->nr].cd_irq >= 0) {
@@ -213,12 +220,20 @@
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_IMR, 0x00C0);
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_MCR, 0x0101);
scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
+
+ if (machine_is_collie())
+ /* We need to disable SS_OUTPUT_ENA here. */
+ write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
/* CF_BUS_OFF */
sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
+
+ if (machine_is_collie())
+ /* We need to disable SS_OUTPUT_ENA here. */
+ write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
@@ -235,6 +250,19 @@
static struct platform_device *sharpsl_pcmcia_device;
+#ifdef CONFIG_SA1100_COLLIE
+int __init pcmcia_collie_init(struct device *dev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_collie())
+ ret = sa11xx_drv_pcmcia_probe(dev, &sharpsl_pcmcia_ops, 0, 1);
+
+ return ret;
+}
+
+#else
+
static int __init sharpsl_pcmcia_init(void)
{
int ret;
@@ -269,6 +297,7 @@
fs_initcall(sharpsl_pcmcia_init);
module_exit(sharpsl_pcmcia_exit);
+#endif
MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support");
MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index f9a5c70..00960a3 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -779,7 +779,7 @@
if (!s->cb_dev || !s->cb_dev->bus)
return -ENODEV;
-#if defined(CONFIG_X86) || defined(CONFIG_X86_64)
+#if defined(CONFIG_X86)
/* If this is the root bus, the risk of hitting
* some strange system devices which aren't protected
* by either ACPI resource tables or properly requested
@@ -994,7 +994,8 @@
NULL,
};
-static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev)
+static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct pcmcia_socket *s = class_get_devdata(class_dev);
struct class_device_attribute **attr;
@@ -1011,7 +1012,8 @@
return ret;
}
-static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev)
+static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct pcmcia_socket *s = class_get_devdata(class_dev);
struct class_device_attribute **attr;
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index d4ed508..acf60ff 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -38,8 +38,12 @@
#include <pcmcia/cs.h>
#include <pcmcia/ss.h>
+#include <asm/hardware/scoop.h>
+
#include "sa1100_generic.h"
+int __init pcmcia_collie_init(struct device *dev);
+
static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
#ifdef CONFIG_SA1100_ASSABET
pcmcia_assabet_init,
@@ -56,6 +60,9 @@
#ifdef CONFIG_SA1100_SIMPAD
pcmcia_simpad_init,
#endif
+#ifdef CONFIG_SA1100_COLLIE
+ pcmcia_collie_init,
+#endif
};
static int sa11x0_drv_pcmcia_probe(struct device *dev)
@@ -74,29 +81,13 @@
return ret;
}
-static int sa11x0_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int sa11x0_drv_pcmcia_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
static struct device_driver sa11x0_pcmcia_driver = {
.probe = sa11x0_drv_pcmcia_probe,
.remove = soc_common_drv_pcmcia_remove,
.name = "sa11x0-pcmcia",
.bus = &platform_bus_type,
- .suspend = sa11x0_drv_pcmcia_suspend,
- .resume = sa11x0_drv_pcmcia_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
/* sa11x0_pcmcia_init()
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index bb90a14..81ded52 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -122,7 +122,7 @@
static int pcmcia_probe(struct sa1111_dev *dev)
{
- char *base;
+ void __iomem *base;
if (!request_mem_region(dev->res.start, 512,
SA1111_DRIVER_NAME(dev)))
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index 1040a6c..4a3150a 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -341,7 +341,8 @@
.write = pccard_store_cis,
};
-static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev)
+static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct class_device_attribute **attr;
int ret = 0;
@@ -357,7 +358,8 @@
return ret;
}
-static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev)
+static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct class_device_attribute **attr;
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index d5a61ea..f158b67 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -372,27 +372,11 @@
/*====================================================================*/
-static int tcic_drv_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int tcic_drv_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
static struct device_driver tcic_driver = {
.name = "tcic-pcmcia",
.bus = &platform_bus_type,
- .suspend = tcic_drv_suspend,
- .resume = tcic_drv_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device tcic_device = {
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 17bb2da..3d2dca6 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -774,31 +774,11 @@
__setup("vrc4171_card=", vrc4171_card_setup);
-static int vrc4171_card_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int retval = 0;
-
- if (level == SUSPEND_SAVE_STATE)
- retval = pcmcia_socket_dev_suspend(dev, state);
-
- return retval;
-}
-
-static int vrc4171_card_resume(struct device *dev, u32 level)
-{
- int retval = 0;
-
- if (level == RESUME_RESTORE_STATE)
- retval = pcmcia_socket_dev_resume(dev);
-
- return retval;
-}
-
static struct device_driver vrc4171_card_driver = {
.name = vrc4171_card_name,
.bus = &platform_bus_type,
- .suspend = vrc4171_card_suspend,
- .resume = vrc4171_card_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static int __devinit vrc4171_card_init(void)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index db9f952..ec6ab65 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -151,6 +151,40 @@
readb(socket->base + 0x800 + reg + 1);
}
+static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *dev = to_pci_dev(yentadev);
+ struct yenta_socket *socket = pci_get_drvdata(dev);
+ int offset = 0, i;
+
+ offset = snprintf(buf, PAGE_SIZE, "CB registers:");
+ for (i = 0; i < 0x24; i += 4) {
+ unsigned val;
+ if (!(i & 15))
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+ val = cb_readl(socket, i);
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val);
+ }
+
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:");
+ for (i = 0; i < 0x45; i++) {
+ unsigned char val;
+ if (!(i & 7)) {
+ if (i & 8) {
+ memcpy(buf + offset, " -", 2);
+ offset += 2;
+ } else
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+ }
+ val = exca_readb(socket, i);
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val);
+ }
+ buf[offset++] = '\n';
+ return offset;
+}
+
+static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL);
+
/*
* Ugh, mixed-mode cardbus and 16-bit pccard state: things depend
* on what kind of card is inserted..
@@ -765,6 +799,9 @@
{
struct yenta_socket *sock = pci_get_drvdata(dev);
+ /* Remove the register attributes */
+ device_remove_file(&dev->dev, &dev_attr_yenta_registers);
+
/* we don't want a dying socket registered */
pcmcia_unregister_socket(&sock->socket);
@@ -1138,8 +1175,11 @@
/* Register it with the pcmcia layer.. */
ret = pcmcia_register_socket(&socket->socket);
- if (ret == 0)
+ if (ret == 0) {
+ /* Add the yenta register attributes */
+ device_create_file(&dev->dev, &dev_attr_yenta_registers);
goto out;
+ }
unmap:
iounmap(socket->base);
diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c
index 94442ff..cbb2749 100644
--- a/drivers/pnp/manager.c
+++ b/drivers/pnp/manager.c
@@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pnp.h>
+#include <linux/slab.h>
+#include <linux/bitmap.h>
#include "base.h"
DECLARE_MUTEX(pnp_res_mutex);
diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c
index b0ca65b..5e38cd7 100644
--- a/drivers/pnp/pnpbios/rsparser.c
+++ b/drivers/pnp/pnpbios/rsparser.c
@@ -7,6 +7,8 @@
#include <linux/ctype.h>
#include <linux/pnp.h>
#include <linux/pnpbios.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#ifdef CONFIG_PCI
#include <linux/pci.h>
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index fc7a213..c570a9f 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -213,6 +213,9 @@
struct string *s, *n;
int rc;
+ if (cp->view.dev)
+ raw3270_activate_view(&cp->view);
+
wrq = xchg(&cp->write, 0);
if (!wrq) {
con3270_set_timer(cp, 1);
@@ -489,8 +492,6 @@
unsigned char c;
cp = condev;
- if (cp->view.dev)
- raw3270_activate_view(&cp->view);
spin_lock_irqsave(&cp->view.lock, flags);
while (count-- > 0) {
c = *str++;
@@ -620,7 +621,7 @@
(void (*)(unsigned long)) con3270_read_tasklet,
(unsigned long) condev->read);
- raw3270_add_view(&condev->view, &con3270_fn, 0);
+ raw3270_add_view(&condev->view, &con3270_fn, 1);
INIT_LIST_HEAD(&condev->freemem);
for (i = 0; i < CON3270_STRING_PAGES; i++) {
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index 60afcdc..735a7fc 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -33,8 +33,11 @@
int read_command; /* ccw command to use for reads. */
int write_command; /* ccw command to use for writes. */
int attention; /* Got attention. */
- struct raw3270_request *clear; /* single clear request. */
- wait_queue_head_t attn_wait; /* Attention wait queue. */
+ int active; /* Fullscreen view is active. */
+ struct raw3270_request *init; /* single init request. */
+ wait_queue_head_t wait; /* Init & attention wait queue. */
+ struct idal_buffer *rdbuf; /* full-screen-deactivate buffer */
+ size_t rdbuf_size; /* size of data returned by RDBUF */
};
static void
@@ -43,58 +46,172 @@
wake_up((wait_queue_head_t *) data);
}
+static inline int
+fs3270_working(struct fs3270 *fp)
+{
+ /*
+ * The fullscreen view is in working order if the view
+ * has been activated AND the initial request is finished.
+ */
+ return fp->active && raw3270_request_final(fp->init);
+}
+
static int
fs3270_do_io(struct raw3270_view *view, struct raw3270_request *rq)
{
- wait_queue_head_t wq;
+ struct fs3270 *fp;
int rc;
- init_waitqueue_head(&wq);
+ fp = (struct fs3270 *) view;
rq->callback = fs3270_wake_up;
- rq->callback_data = &wq;
- rc = raw3270_start(view, rq);
- if (rc)
- return rc;
- /* Started sucessfully. Now wait for completion. */
- wait_event(wq, raw3270_request_final(rq));
- return rq->rc;
-}
+ rq->callback_data = &fp->wait;
-static void
-fs3270_reset_callback(struct raw3270_request *rq, void *data)
-{
- raw3270_request_reset(rq);
+ do {
+ if (!fs3270_working(fp)) {
+ /* Fullscreen view isn't ready yet. */
+ rc = wait_event_interruptible(fp->wait,
+ fs3270_working(fp));
+ if (rc != 0)
+ break;
+ }
+ rc = raw3270_start(view, rq);
+ if (rc == 0) {
+ /* Started sucessfully. Now wait for completion. */
+ wait_event(fp->wait, raw3270_request_final(rq));
+ }
+ } while (rc == -EACCES);
+ return rc;
}
/*
* Switch to the fullscreen view.
*/
+static void
+fs3270_reset_callback(struct raw3270_request *rq, void *data)
+{
+ struct fs3270 *fp;
+
+ fp = (struct fs3270 *) rq->view;
+ raw3270_request_reset(rq);
+ wake_up(&fp->wait);
+}
+
+static void
+fs3270_restore_callback(struct raw3270_request *rq, void *data)
+{
+ struct fs3270 *fp;
+
+ fp = (struct fs3270 *) rq->view;
+ if (rq->rc != 0 || rq->rescnt != 0) {
+ if (fp->fs_pid)
+ kill_proc(fp->fs_pid, SIGHUP, 1);
+ }
+ fp->rdbuf_size = 0;
+ raw3270_request_reset(rq);
+ wake_up(&fp->wait);
+}
+
static int
fs3270_activate(struct raw3270_view *view)
{
struct fs3270 *fp;
+ char *cp;
+ int rc;
fp = (struct fs3270 *) view;
- raw3270_request_set_cmd(fp->clear, TC_EWRITEA);
- fp->clear->callback = fs3270_reset_callback;
- return raw3270_start(view, fp->clear);
+
+ /* If an old init command is still running just return. */
+ if (!raw3270_request_final(fp->init))
+ return 0;
+
+ if (fp->rdbuf_size == 0) {
+ /* No saved buffer. Just clear the screen. */
+ raw3270_request_set_cmd(fp->init, TC_EWRITEA);
+ fp->init->callback = fs3270_reset_callback;
+ } else {
+ /* Restore fullscreen buffer saved by fs3270_deactivate. */
+ raw3270_request_set_cmd(fp->init, TC_EWRITEA);
+ raw3270_request_set_idal(fp->init, fp->rdbuf);
+ fp->init->ccw.count = fp->rdbuf_size;
+ cp = fp->rdbuf->data[0];
+ cp[0] = TW_KR;
+ cp[1] = TO_SBA;
+ cp[2] = cp[6];
+ cp[3] = cp[7];
+ cp[4] = TO_IC;
+ cp[5] = TO_SBA;
+ cp[6] = 0x40;
+ cp[7] = 0x40;
+ fp->init->rescnt = 0;
+ fp->init->callback = fs3270_restore_callback;
+ }
+ rc = fp->init->rc = raw3270_start_locked(view, fp->init);
+ if (rc)
+ fp->init->callback(fp->init, NULL);
+ else
+ fp->active = 1;
+ return rc;
}
/*
* Shutdown fullscreen view.
*/
static void
+fs3270_save_callback(struct raw3270_request *rq, void *data)
+{
+ struct fs3270 *fp;
+
+ fp = (struct fs3270 *) rq->view;
+
+ /* Correct idal buffer element 0 address. */
+ fp->rdbuf->data[0] -= 5;
+ fp->rdbuf->size += 5;
+
+ /*
+ * If the rdbuf command failed or the idal buffer is
+ * to small for the amount of data returned by the
+ * rdbuf command, then we have no choice but to send
+ * a SIGHUP to the application.
+ */
+ if (rq->rc != 0 || rq->rescnt == 0) {
+ if (fp->fs_pid)
+ kill_proc(fp->fs_pid, SIGHUP, 1);
+ fp->rdbuf_size = 0;
+ } else
+ fp->rdbuf_size = fp->rdbuf->size - rq->rescnt;
+ raw3270_request_reset(rq);
+ wake_up(&fp->wait);
+}
+
+static void
fs3270_deactivate(struct raw3270_view *view)
{
- // FIXME: is this a good idea? The user program using fullscreen 3270
- // will die just because a console message appeared. On the other
- // hand the fullscreen device is unoperational now.
struct fs3270 *fp;
fp = (struct fs3270 *) view;
- if (fp->fs_pid != 0)
- kill_proc(fp->fs_pid, SIGHUP, 1);
- fp->fs_pid = 0;
+ fp->active = 0;
+
+ /* If an old init command is still running just return. */
+ if (!raw3270_request_final(fp->init))
+ return;
+
+ /* Prepare read-buffer request. */
+ raw3270_request_set_cmd(fp->init, TC_RDBUF);
+ /*
+ * Hackish: skip first 5 bytes of the idal buffer to make
+ * room for the TW_KR/TO_SBA/<address>/<address>/TO_IC sequence
+ * in the activation command.
+ */
+ fp->rdbuf->data[0] += 5;
+ fp->rdbuf->size -= 5;
+ raw3270_request_set_idal(fp->init, fp->rdbuf);
+ fp->init->rescnt = 0;
+ fp->init->callback = fs3270_save_callback;
+
+ /* Start I/O to read in the 3270 buffer. */
+ fp->init->rc = raw3270_start_locked(view, fp->init);
+ if (fp->init->rc)
+ fp->init->callback(fp->init, NULL);
}
static int
@@ -103,7 +220,7 @@
/* Handle ATTN. Set indication and wake waiters for attention. */
if (irb->scsw.dstat & DEV_STAT_ATTENTION) {
fp->attention = 1;
- wake_up(&fp->attn_wait);
+ wake_up(&fp->wait);
}
if (rq) {
@@ -125,7 +242,7 @@
struct fs3270 *fp;
struct raw3270_request *rq;
struct idal_buffer *ib;
- int rc;
+ ssize_t rc;
if (count == 0 || count > 65535)
return -EINVAL;
@@ -133,7 +250,7 @@
if (!fp)
return -ENODEV;
ib = idal_buffer_alloc(count, 0);
- if (!ib)
+ if (IS_ERR(ib))
return -ENOMEM;
rq = raw3270_request_alloc(0);
if (!IS_ERR(rq)) {
@@ -141,10 +258,19 @@
fp->read_command = 6;
raw3270_request_set_cmd(rq, fp->read_command ? : 2);
raw3270_request_set_idal(rq, ib);
- wait_event(fp->attn_wait, fp->attention);
- rc = fs3270_do_io(&fp->view, rq);
- if (rc == 0 && idal_buffer_to_user(ib, data, count))
- rc = -EFAULT;
+ rc = wait_event_interruptible(fp->wait, fp->attention);
+ fp->attention = 0;
+ if (rc == 0) {
+ rc = fs3270_do_io(&fp->view, rq);
+ if (rc == 0) {
+ count -= rq->rescnt;
+ if (idal_buffer_to_user(ib, data, count) != 0)
+ rc = -EFAULT;
+ else
+ rc = count;
+
+ }
+ }
raw3270_request_free(rq);
} else
rc = PTR_ERR(rq);
@@ -162,13 +288,13 @@
struct raw3270_request *rq;
struct idal_buffer *ib;
int write_command;
- int rc;
+ ssize_t rc;
fp = filp->private_data;
if (!fp)
return -ENODEV;
ib = idal_buffer_alloc(count, 0);
- if (!ib)
+ if (IS_ERR(ib))
return -ENOMEM;
rq = raw3270_request_alloc(0);
if (!IS_ERR(rq)) {
@@ -179,6 +305,8 @@
raw3270_request_set_cmd(rq, write_command);
raw3270_request_set_idal(rq, ib);
rc = fs3270_do_io(&fp->view, rq);
+ if (rc == 0)
+ rc = count - rq->rescnt;
} else
rc = -EFAULT;
raw3270_request_free(rq);
@@ -232,7 +360,7 @@
}
/*
- * Allocate tty3270 structure.
+ * Allocate fs3270 structure.
*/
static struct fs3270 *
fs3270_alloc_view(void)
@@ -243,8 +371,8 @@
if (!fp)
return ERR_PTR(-ENOMEM);
memset(fp, 0, sizeof(struct fs3270));
- fp->clear = raw3270_request_alloc(0);
- if (!IS_ERR(fp->clear)) {
+ fp->init = raw3270_request_alloc(0);
+ if (IS_ERR(fp->init)) {
kfree(fp);
return ERR_PTR(-ENOMEM);
}
@@ -252,12 +380,17 @@
}
/*
- * Free tty3270 structure.
+ * Free fs3270 structure.
*/
static void
fs3270_free_view(struct raw3270_view *view)
{
- raw3270_request_free(((struct fs3270 *) view)->clear);
+ struct fs3270 *fp;
+
+ fp = (struct fs3270 *) view;
+ if (fp->rdbuf)
+ idal_buffer_free(fp->rdbuf);
+ raw3270_request_free(((struct fs3270 *) view)->init);
kfree(view);
}
@@ -285,11 +418,20 @@
fs3270_open(struct inode *inode, struct file *filp)
{
struct fs3270 *fp;
+ struct idal_buffer *ib;
int minor, rc;
if (imajor(filp->f_dentry->d_inode) != IBM_FS3270_MAJOR)
return -ENODEV;
minor = iminor(filp->f_dentry->d_inode);
+ /* Check for minor 0 multiplexer. */
+ if (minor == 0) {
+ if (!current->signal->tty)
+ return -ENODEV;
+ if (current->signal->tty->driver->major != IBM_TTY3270_MAJOR)
+ return -ENODEV;
+ minor = current->signal->tty->index + RAW3270_FIRSTMINOR;
+ }
/* Check if some other program is already using fullscreen mode. */
fp = (struct fs3270 *) raw3270_find_view(&fs3270_fn, minor);
if (!IS_ERR(fp)) {
@@ -301,7 +443,7 @@
if (IS_ERR(fp))
return PTR_ERR(fp);
- init_waitqueue_head(&fp->attn_wait);
+ init_waitqueue_head(&fp->wait);
fp->fs_pid = current->pid;
rc = raw3270_add_view(&fp->view, &fs3270_fn, minor);
if (rc) {
@@ -309,8 +451,18 @@
return rc;
}
+ /* Allocate idal-buffer. */
+ ib = idal_buffer_alloc(2*fp->view.rows*fp->view.cols + 5, 0);
+ if (IS_ERR(ib)) {
+ raw3270_put_view(&fp->view);
+ raw3270_del_view(&fp->view);
+ return PTR_ERR(fp);
+ }
+ fp->rdbuf = ib;
+
rc = raw3270_activate_view(&fp->view);
if (rc) {
+ raw3270_put_view(&fp->view);
raw3270_del_view(&fp->view);
return rc;
}
@@ -329,8 +481,12 @@
fp = filp->private_data;
filp->private_data = 0;
- if (fp)
+ if (fp) {
+ fp->fs_pid = 0;
+ raw3270_reset(&fp->view);
+ raw3270_put_view(&fp->view);
raw3270_del_view(&fp->view);
+ }
return 0;
}
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 328d9cb..d669464 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -25,6 +25,12 @@
#include "raw3270.h"
+#include <linux/major.h>
+#include <linux/kdev_t.h>
+#include <linux/device.h>
+
+struct class *class3270;
+
/* The main 3270 data structure. */
struct raw3270 {
struct list_head list;
@@ -41,6 +47,8 @@
struct timer_list timer; /* Device timer. */
unsigned char *ascebc; /* ascii -> ebcdic table */
+ struct class_device *clttydev; /* 3270-class tty device ptr */
+ struct class_device *cltubdev; /* 3270-class tub device ptr */
};
/* raw3270->flags */
@@ -317,6 +325,22 @@
}
int
+raw3270_start_locked(struct raw3270_view *view, struct raw3270_request *rq)
+{
+ struct raw3270 *rp;
+ int rc;
+
+ rp = view->dev;
+ if (!rp || rp->view != view)
+ rc = -EACCES;
+ else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
+ rc = -ENODEV;
+ else
+ rc = __raw3270_start(rp, view, rq);
+ return rc;
+}
+
+int
raw3270_start_irq(struct raw3270_view *view, struct raw3270_request *rq)
{
struct raw3270 *rp;
@@ -744,6 +768,22 @@
return rc;
}
+int
+raw3270_reset(struct raw3270_view *view)
+{
+ struct raw3270 *rp;
+ int rc;
+
+ rp = view->dev;
+ if (!rp || rp->view != view)
+ rc = -EACCES;
+ else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
+ rc = -ENODEV;
+ else
+ rc = raw3270_reset_device(view->dev);
+ return rc;
+}
+
/*
* Setup new 3270 device.
*/
@@ -774,11 +814,12 @@
/*
* Add device to list and find the smallest unused minor
- * number for it.
+ * number for it. Note: there is no device with minor 0,
+ * see special case for fs3270.c:fs3270_open().
*/
down(&raw3270_sem);
/* Keep the list sorted. */
- minor = 0;
+ minor = RAW3270_FIRSTMINOR;
rp->minor = -1;
list_for_each(l, &raw3270_devices) {
tmp = list_entry(l, struct raw3270, list);
@@ -789,7 +830,7 @@
}
minor++;
}
- if (rp->minor == -1 && minor < RAW3270_MAXDEVS) {
+ if (rp->minor == -1 && minor < RAW3270_MAXDEVS + RAW3270_FIRSTMINOR) {
rp->minor = minor;
list_add_tail(&rp->list, &raw3270_devices);
}
@@ -941,11 +982,12 @@
list_add_tail(&view->list, &rp->view_list);
/* Try to activate another view. */
if (test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
- list_for_each_entry(view, &rp->view_list, list)
- if (view->fn->activate(view) == 0) {
- rp->view = view;
+ list_for_each_entry(view, &rp->view_list, list) {
+ rp->view = view;
+ if (view->fn->activate(view) == 0)
break;
- }
+ rp->view = 0;
+ }
}
}
spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
@@ -961,6 +1003,8 @@
struct raw3270 *rp;
int rc;
+ if (minor <= 0)
+ return -ENODEV;
down(&raw3270_sem);
rc = -ENODEV;
list_for_each_entry(rp, &raw3270_devices, list) {
@@ -976,7 +1020,7 @@
view->cols = rp->cols;
view->ascebc = rp->ascebc;
spin_lock_init(&view->lock);
- list_add_tail(&view->list, &rp->view_list);
+ list_add(&view->list, &rp->view_list);
rc = 0;
}
spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
@@ -1039,7 +1083,7 @@
if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
/* Try to activate another view. */
list_for_each_entry(nv, &rp->view_list, list) {
- if (nv->fn->activate(view) == 0) {
+ if (nv->fn->activate(nv) == 0) {
rp->view = nv;
break;
}
@@ -1063,6 +1107,12 @@
/* Remove from device chain. */
down(&raw3270_sem);
+ if (rp->clttydev)
+ class_device_destroy(class3270,
+ MKDEV(IBM_TTY3270_MAJOR, rp->minor));
+ if (rp->cltubdev)
+ class_device_destroy(class3270,
+ MKDEV(IBM_FS3270_MAJOR, rp->minor));
list_del_init(&rp->list);
up(&raw3270_sem);
@@ -1129,6 +1179,16 @@
{
//FIXME: check return code
sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
+ rp->clttydev =
+ class_device_create(class3270,
+ MKDEV(IBM_TTY3270_MAJOR, rp->minor),
+ &rp->cdev->dev, "tty%s",
+ rp->cdev->dev.bus_id);
+ rp->cltubdev =
+ class_device_create(class3270,
+ MKDEV(IBM_FS3270_MAJOR, rp->minor),
+ &rp->cdev->dev, "tub%s",
+ rp->cdev->dev.bus_id);
}
/*
@@ -1189,13 +1249,13 @@
return PTR_ERR(rp);
rc = raw3270_reset_device(rp);
if (rc)
- return rc;
+ goto failure;
rc = raw3270_size_device(rp);
if (rc)
- return rc;
+ goto failure;
rc = raw3270_reset_device(rp);
if (rc)
- return rc;
+ goto failure;
raw3270_create_attributes(rp);
set_bit(RAW3270_FLAGS_READY, &rp->flags);
down(&raw3270_sem);
@@ -1203,6 +1263,10 @@
np->notifier(rp->minor, 1);
up(&raw3270_sem);
return 0;
+
+failure:
+ raw3270_delete_device(rp);
+ return rc;
}
/*
@@ -1217,6 +1281,14 @@
struct raw3270_notifier *np;
rp = cdev->dev.driver_data;
+ /*
+ * _remove is the opposite of _probe; it's probe that
+ * should set up rp. raw3270_remove gets entered for
+ * devices even if they haven't been varied online.
+ * Thus, rp may validly be NULL here.
+ */
+ if (rp == NULL)
+ return;
clear_bit(RAW3270_FLAGS_READY, &rp->flags);
sysfs_remove_group(&cdev->dev.kobj, &raw3270_attr_group);
@@ -1301,6 +1373,7 @@
if (rc == 0) {
/* Create attributes for early (= console) device. */
down(&raw3270_sem);
+ class3270 = class_create(THIS_MODULE, "3270");
list_for_each_entry(rp, &raw3270_devices, list) {
get_device(&rp->cdev->dev);
raw3270_create_attributes(rp);
@@ -1314,6 +1387,7 @@
raw3270_exit(void)
{
ccw_driver_unregister(&raw3270_ccw_driver);
+ class_destroy(class3270);
}
MODULE_LICENSE("GPL");
@@ -1335,7 +1409,9 @@
EXPORT_SYMBOL(raw3270_activate_view);
EXPORT_SYMBOL(raw3270_deactivate_view);
EXPORT_SYMBOL(raw3270_start);
+EXPORT_SYMBOL(raw3270_start_locked);
EXPORT_SYMBOL(raw3270_start_irq);
+EXPORT_SYMBOL(raw3270_reset);
EXPORT_SYMBOL(raw3270_register_notifier);
EXPORT_SYMBOL(raw3270_unregister_notifier);
EXPORT_SYMBOL(raw3270_wait_queue);
diff --git a/drivers/s390/char/raw3270.h b/drivers/s390/char/raw3270.h
index ed5d4eb..b635bf8 100644
--- a/drivers/s390/char/raw3270.h
+++ b/drivers/s390/char/raw3270.h
@@ -21,6 +21,7 @@
/* Local Channel Commands */
#define TC_WRITE 0x01 /* Write */
+#define TC_RDBUF 0x02 /* Read Buffer */
#define TC_EWRITE 0x05 /* Erase write */
#define TC_READMOD 0x06 /* Read modified */
#define TC_EWRITEA 0x0d /* Erase write alternate */
@@ -76,7 +77,8 @@
#define TW_KR 0xc2 /* Keyboard restore */
#define TW_PLUSALARM 0x04 /* Add this bit for alarm */
-#define RAW3270_MAXDEVS 256
+#define RAW3270_FIRSTMINOR 1 /* First minor number */
+#define RAW3270_MAXDEVS 255 /* Max number of 3270 devices */
/* For TUBGETMOD and TUBSETMOD. Should include. */
struct raw3270_iocb {
@@ -166,7 +168,10 @@
void raw3270_deactivate_view(struct raw3270_view *);
struct raw3270_view *raw3270_find_view(struct raw3270_fn *, int);
int raw3270_start(struct raw3270_view *, struct raw3270_request *);
+int raw3270_start_locked(struct raw3270_view *, struct raw3270_request *);
int raw3270_start_irq(struct raw3270_view *, struct raw3270_request *);
+int raw3270_reset(struct raw3270_view *);
+struct raw3270_view *raw3270_view(struct raw3270_view *);
/* Reference count inliner for view structures. */
static inline void
diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c
index ed0cb1f..fcaee44 100644
--- a/drivers/s390/char/tape_class.c
+++ b/drivers/s390/char/tape_class.c
@@ -72,6 +72,7 @@
tcd->class_device = class_device_create(
tape_class,
+ NULL,
tcd->char_device->dev,
device,
"%s", tcd->device_name
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 7db5ebc..4b90693 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -653,18 +653,12 @@
tp->update_flags = TTY_UPDATE_ALL;
tty3270_set_timer(tp, 1);
spin_unlock_irqrestore(&tp->view.lock, flags);
- start_tty(tp->tty);
return 0;
}
static void
tty3270_deactivate(struct raw3270_view *view)
{
- struct tty3270 *tp;
-
- tp = (struct tty3270 *) view;
- if (tp && tp->tty)
- stop_tty(tp->tty);
}
static int
@@ -716,13 +710,13 @@
tp->freemem_pages[pages], PAGE_SIZE);
}
tp->write = raw3270_request_alloc(TTY3270_OUTPUT_BUFFER_SIZE);
- if (!tp->write)
+ if (IS_ERR(tp->write))
goto out_pages;
tp->read = raw3270_request_alloc(0);
- if (!tp->read)
+ if (IS_ERR(tp->read))
goto out_write;
tp->kreset = raw3270_request_alloc(1);
- if (!tp->kreset)
+ if (IS_ERR(tp->kreset))
goto out_read;
tp->kbd = kbd_alloc();
if (!tp->kbd)
@@ -845,7 +839,8 @@
int i;
for (i = 0; i < tty3270_max_index; i++) {
- tp = (struct tty3270 *) raw3270_find_view(&tty3270_fn, i);
+ tp = (struct tty3270 *)
+ raw3270_find_view(&tty3270_fn, i + RAW3270_FIRSTMINOR);
if (!IS_ERR(tp))
raw3270_del_view(&tp->view);
}
@@ -871,7 +866,9 @@
if (tty->count > 1)
return 0;
/* Check if the tty3270 is already there. */
- tp = (struct tty3270 *) raw3270_find_view(&tty3270_fn, tty->index);
+ tp = (struct tty3270 *)
+ raw3270_find_view(&tty3270_fn,
+ tty->index + RAW3270_FIRSTMINOR);
if (!IS_ERR(tp)) {
tty->driver_data = tp;
tty->winsize.ws_row = tp->view.rows - 2;
@@ -903,7 +900,8 @@
(void (*)(unsigned long)) tty3270_read_tasklet,
(unsigned long) tp->read);
- rc = raw3270_add_view(&tp->view, &tty3270_fn, tty->index);
+ rc = raw3270_add_view(&tp->view, &tty3270_fn,
+ tty->index + RAW3270_FIRSTMINOR);
if (rc) {
tty3270_free_view(tp);
return rc;
@@ -911,8 +909,8 @@
rc = tty3270_alloc_screen(tp);
if (rc) {
- raw3270_del_view(&tp->view);
raw3270_put_view(&tp->view);
+ raw3270_del_view(&tp->view);
return rc;
}
@@ -1780,7 +1778,7 @@
struct tty_driver *driver;
int ret;
- driver = alloc_tty_driver(256);
+ driver = alloc_tty_driver(RAW3270_MAXDEVS);
if (!driver)
return -ENOMEM;
@@ -1794,6 +1792,7 @@
driver->driver_name = "ttyTUB";
driver->name = "ttyTUB";
driver->major = IBM_TTY3270_MAJOR;
+ driver->minor_start = RAW3270_FIRSTMINOR;
driver->type = TTY_DRIVER_TYPE_SYSTEM;
driver->subtype = SYSTEM_TYPE_TTY;
driver->init_termios = tty_std_termios;
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index 491f00c..b2d75de 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -788,6 +788,7 @@
}
priv->class_device = class_device_create(
vmlogrdr_class,
+ NULL,
MKDEV(vmlogrdr_major, priv->minor_num),
dev,
"%s", dev->bus_id );
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index 8cc4f1a..c05b069 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -30,10 +30,13 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/timex.h> /* get_clock() */
#include <asm/ccwdev.h>
#include <asm/cio.h>
#include <asm/cmb.h>
+#include <asm/div64.h>
#include "cio.h"
#include "css.h"
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 9adc11e..811c9d1 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -22,6 +22,7 @@
#include <asm/ccwdev.h>
#include <asm/cio.h>
+#include <asm/param.h> /* HZ */
#include "cio.h"
#include "css.h"
@@ -252,6 +253,23 @@
}
static ssize_t
+modalias_show (struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct ccw_device *cdev = to_ccwdev(dev);
+ struct ccw_device_id *id = &(cdev->id);
+ int ret;
+
+ ret = sprintf(buf, "ccw:t%04Xm%02x",
+ id->cu_type, id->cu_model);
+ if (id->dev_type != 0)
+ ret += sprintf(buf + ret, "dt%04Xdm%02X\n",
+ id->dev_type, id->dev_model);
+ else
+ ret += sprintf(buf + ret, "dtdm\n");
+ return ret;
+}
+
+static ssize_t
online_show (struct device *dev, struct device_attribute *attr, char *buf)
{
struct ccw_device *cdev = to_ccwdev(dev);
@@ -448,6 +466,7 @@
static DEVICE_ATTR(pimpampom, 0444, pimpampom_show, NULL);
static DEVICE_ATTR(devtype, 0444, devtype_show, NULL);
static DEVICE_ATTR(cutype, 0444, cutype_show, NULL);
+static DEVICE_ATTR(modalias, 0444, modalias_show, NULL);
static DEVICE_ATTR(online, 0644, online_show, online_store);
extern struct device_attribute dev_attr_cmb_enable;
static DEVICE_ATTR(availability, 0444, available_show, NULL);
@@ -471,6 +490,7 @@
static struct attribute * ccwdev_attrs[] = {
&dev_attr_devtype.attr,
&dev_attr_cutype.attr,
+ &dev_attr_modalias.attr,
&dev_attr_online.attr,
&dev_attr_cmb_enable.attr,
&dev_attr_availability.attr,
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index fbe4202..c1c89f4 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -11,6 +11,8 @@
#include <linux/module.h>
#include <linux/config.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/string.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
diff --git a/drivers/s390/net/fsm.c b/drivers/s390/net/fsm.c
index fa09440..38f50b7 100644
--- a/drivers/s390/net/fsm.c
+++ b/drivers/s390/net/fsm.c
@@ -16,7 +16,7 @@
fsm_instance *
init_fsm(char *name, const char **state_names, const char **event_names, int nr_states,
- int nr_events, const fsm_node *tmpl, int tmpl_len, int order)
+ int nr_events, const fsm_node *tmpl, int tmpl_len, gfp_t order)
{
int i;
fsm_instance *this;
diff --git a/drivers/s390/net/fsm.h b/drivers/s390/net/fsm.h
index f9a0110..1b8a7e7 100644
--- a/drivers/s390/net/fsm.h
+++ b/drivers/s390/net/fsm.h
@@ -110,7 +110,7 @@
init_fsm(char *name, const char **state_names,
const char **event_names,
int nr_states, int nr_events, const fsm_node *tmpl,
- int tmpl_len, int order);
+ int tmpl_len, gfp_t order);
/**
* Releases an FSM
diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h
index 9963479..38a2441 100644
--- a/drivers/s390/net/qeth.h
+++ b/drivers/s390/net/qeth.h
@@ -275,6 +275,10 @@
QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT, \
QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT, \
QETH_MAX_QUEUES,0x103}, \
+ {0x1731,0x06,0x1732,0x06,QETH_CARD_TYPE_OSN,0, \
+ QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT, \
+ QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT, \
+ QETH_MAX_QUEUES,0}, \
{0,0,0,0,0,0,0,0,0}}
#define QETH_REAL_CARD 1
@@ -363,10 +367,22 @@
__u8 reserved2[16];
} __attribute__ ((packed));
+struct qeth_hdr_osn {
+ __u8 id;
+ __u8 reserved;
+ __u16 seq_no;
+ __u16 reserved2;
+ __u16 control_flags;
+ __u16 pdu_length;
+ __u8 reserved3[18];
+ __u32 ccid;
+} __attribute__ ((packed));
+
struct qeth_hdr {
union {
struct qeth_hdr_layer2 l2;
struct qeth_hdr_layer3 l3;
+ struct qeth_hdr_osn osn;
} hdr;
} __attribute__ ((packed));
@@ -413,6 +429,7 @@
QETH_HEADER_TYPE_LAYER3 = 0x01,
QETH_HEADER_TYPE_LAYER2 = 0x02,
QETH_HEADER_TYPE_TSO = 0x03,
+ QETH_HEADER_TYPE_OSN = 0x04,
};
/* flags for qeth_hdr.ext_flags */
#define QETH_HDR_EXT_VLAN_FRAME 0x01
@@ -582,7 +599,6 @@
* Protocol versions
*/
enum qeth_prot_versions {
- QETH_PROT_SNA = 0x0001,
QETH_PROT_IPV4 = 0x0004,
QETH_PROT_IPV6 = 0x0006,
};
@@ -761,6 +777,11 @@
QETH_RECOVER_THREAD = 2,
};
+struct qeth_osn_info {
+ int (*assist_cb)(struct net_device *dev, void *data);
+ int (*data_cb)(struct sk_buff *skb);
+};
+
struct qeth_card {
struct list_head list;
enum qeth_card_states state;
@@ -803,6 +824,7 @@
int use_hard_stop;
int (*orig_hard_header)(struct sk_buff *,struct net_device *,
unsigned short,void *,void *,unsigned);
+ struct qeth_osn_info osn_info;
};
struct qeth_card_list_struct {
@@ -916,10 +938,12 @@
static inline unsigned short
qeth_get_netdev_flags(struct qeth_card *card)
{
- if (card->options.layer2)
+ if (card->options.layer2 &&
+ (card->info.type == QETH_CARD_TYPE_OSAE))
return 0;
switch (card->info.type) {
case QETH_CARD_TYPE_IQD:
+ case QETH_CARD_TYPE_OSN:
return IFF_NOARP;
#ifdef CONFIG_QETH_IPV6
default:
@@ -956,9 +980,10 @@
qeth_get_max_mtu_for_card(int cardtype)
{
switch (cardtype) {
+
case QETH_CARD_TYPE_UNKNOWN:
- return 61440;
case QETH_CARD_TYPE_OSAE:
+ case QETH_CARD_TYPE_OSN:
return 61440;
case QETH_CARD_TYPE_IQD:
return 57344;
@@ -1004,6 +1029,7 @@
case QETH_CARD_TYPE_IQD:
return ((mtu >= 576) &&
(mtu <= card->info.max_mtu + 4096 - 32));
+ case QETH_CARD_TYPE_OSN:
case QETH_CARD_TYPE_UNKNOWN:
default:
return 1;
@@ -1015,6 +1041,7 @@
{
switch (cardtype) {
case QETH_CARD_TYPE_OSAE:
+ case QETH_CARD_TYPE_OSN:
switch (linktype) {
case QETH_LINK_TYPE_LANE_TR:
case QETH_LINK_TYPE_HSTR:
@@ -1182,4 +1209,16 @@
extern void
qeth_flush_buffers(struct qeth_qdio_out_q *, int, int, int);
+extern int
+qeth_osn_assist(struct net_device *, void *, int);
+
+extern int
+qeth_osn_register(unsigned char *read_dev_no,
+ struct net_device **,
+ int (*assist_cb)(struct net_device *, void *),
+ int (*data_cb)(struct sk_buff *));
+
+extern void
+qeth_osn_deregister(struct net_device *);
+
#endif /* __QETH_H__ */
diff --git a/drivers/s390/net/qeth_fs.h b/drivers/s390/net/qeth_fs.h
index 5c9a51c..c0b4c8d 100644
--- a/drivers/s390/net/qeth_fs.h
+++ b/drivers/s390/net/qeth_fs.h
@@ -12,7 +12,7 @@
#ifndef __QETH_FS_H__
#define __QETH_FS_H__
-#define VERSION_QETH_FS_H "$Revision: 1.9 $"
+#define VERSION_QETH_FS_H "$Revision: 1.10 $"
extern const char *VERSION_QETH_PROC_C;
extern const char *VERSION_QETH_SYS_C;
@@ -43,6 +43,12 @@
qeth_remove_device_attributes(struct device *dev);
extern int
+qeth_create_device_attributes_osn(struct device *dev);
+
+extern void
+qeth_remove_device_attributes_osn(struct device *dev);
+
+extern int
qeth_create_driver_attributes(void);
extern void
@@ -108,6 +114,8 @@
return " OSD Express";
case QETH_CARD_TYPE_IQD:
return " HiperSockets";
+ case QETH_CARD_TYPE_OSN:
+ return " OSN QDIO";
default:
return " unknown";
}
@@ -153,6 +161,8 @@
}
case QETH_CARD_TYPE_IQD:
return "HiperSockets";
+ case QETH_CARD_TYPE_OSN:
+ return "OSN";
default:
return "unknown";
}
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index bd28e24..692003c 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -196,7 +196,6 @@
{
struct qeth_notify_list_struct *n_entry;
-
/*check first if entry already exists*/
spin_lock(&qeth_notify_lock);
list_for_each_entry(n_entry, &qeth_notify_list, list) {
@@ -1024,7 +1023,10 @@
card->options.fake_broadcast = 0;
card->options.add_hhlen = DEFAULT_ADD_HHLEN;
card->options.fake_ll = 0;
- card->options.layer2 = 0;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ card->options.layer2 = 1;
+ else
+ card->options.layer2 = 0;
}
/**
@@ -1113,19 +1115,20 @@
QETH_DBF_TEXT(setup, 2, "detcdtyp");
+ card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT;
+ card->qdio.default_out_queue = QETH_DEFAULT_QUEUE;
while (known_devices[i][4]) {
if ((CARD_RDEV(card)->id.dev_type == known_devices[i][2]) &&
(CARD_RDEV(card)->id.dev_model == known_devices[i][3])) {
card->info.type = known_devices[i][4];
+ card->qdio.no_out_queues = known_devices[i][8];
+ card->info.is_multicast_different = known_devices[i][9];
if (is_1920_device(card)) {
PRINT_INFO("Priority Queueing not able "
"due to hardware limitations!\n");
card->qdio.no_out_queues = 1;
card->qdio.default_out_queue = 0;
- } else {
- card->qdio.no_out_queues = known_devices[i][8];
- }
- card->info.is_multicast_different = known_devices[i][9];
+ }
return 0;
}
i++;
@@ -1149,6 +1152,8 @@
if (!get_device(dev))
return -ENODEV;
+ QETH_DBF_TEXT_(setup, 2, "%s", gdev->dev.bus_id);
+
card = qeth_alloc_card();
if (!card) {
put_device(dev);
@@ -1158,28 +1163,27 @@
card->read.ccwdev = gdev->cdev[0];
card->write.ccwdev = gdev->cdev[1];
card->data.ccwdev = gdev->cdev[2];
-
- if ((rc = qeth_setup_card(card))){
- QETH_DBF_TEXT_(setup, 2, "2err%d", rc);
- put_device(dev);
- qeth_free_card(card);
- return rc;
- }
gdev->dev.driver_data = card;
card->gdev = gdev;
gdev->cdev[0]->handler = qeth_irq;
gdev->cdev[1]->handler = qeth_irq;
gdev->cdev[2]->handler = qeth_irq;
- rc = qeth_create_device_attributes(dev);
- if (rc) {
+ if ((rc = qeth_determine_card_type(card))){
+ PRINT_WARN("%s: not a valid card type\n", __func__);
+ QETH_DBF_TEXT_(setup, 2, "3err%d", rc);
+ put_device(dev);
+ qeth_free_card(card);
+ return rc;
+ }
+ if ((rc = qeth_setup_card(card))){
+ QETH_DBF_TEXT_(setup, 2, "2err%d", rc);
put_device(dev);
qeth_free_card(card);
return rc;
}
- if ((rc = qeth_determine_card_type(card))){
- PRINT_WARN("%s: not a valid card type\n", __func__);
- QETH_DBF_TEXT_(setup, 2, "3err%d", rc);
+ rc = qeth_create_device_attributes(dev);
+ if (rc) {
put_device(dev);
qeth_free_card(card);
return rc;
@@ -1660,6 +1664,8 @@
netif_carrier_on(card->dev);
qeth_schedule_recovery(card);
return NULL;
+ case IPA_CMD_MODCCID:
+ return cmd;
case IPA_CMD_REGISTER_LOCAL_ADDR:
QETH_DBF_TEXT(trace,3, "irla");
break;
@@ -1721,6 +1727,14 @@
cmd = qeth_check_ipa_data(card, iob);
if ((cmd == NULL) && (card->state != CARD_STATE_DOWN))
goto out;
+ /*in case of OSN : check if cmd is set */
+ if (card->info.type == QETH_CARD_TYPE_OSN &&
+ cmd &&
+ cmd->hdr.command != IPA_CMD_STARTLAN &&
+ card->osn_info.assist_cb != NULL) {
+ card->osn_info.assist_cb(card->dev, cmd);
+ goto out;
+ }
spin_lock_irqsave(&card->lock, flags);
list_for_each_entry_safe(reply, r, &card->cmd_waiter_list, list) {
@@ -1737,8 +1751,7 @@
keep_reply = reply->callback(card,
reply,
(unsigned long)cmd);
- }
- else
+ } else
keep_reply = reply->callback(card,
reply,
(unsigned long)iob);
@@ -1768,6 +1781,24 @@
qeth_release_buffer(channel,iob);
}
+static inline void
+qeth_prepare_control_data(struct qeth_card *card, int len,
+struct qeth_cmd_buffer *iob)
+{
+ qeth_setup_ccw(&card->write,iob->data,len);
+ iob->callback = qeth_release_buffer;
+
+ memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data),
+ &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH);
+ card->seqno.trans_hdr++;
+ memcpy(QETH_PDU_HEADER_SEQ_NO(iob->data),
+ &card->seqno.pdu_hdr, QETH_SEQ_NO_LENGTH);
+ card->seqno.pdu_hdr++;
+ memcpy(QETH_PDU_HEADER_ACK_SEQ_NO(iob->data),
+ &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH);
+ QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN);
+}
+
static int
qeth_send_control_data(struct qeth_card *card, int len,
struct qeth_cmd_buffer *iob,
@@ -1778,24 +1809,11 @@
{
int rc;
unsigned long flags;
- struct qeth_reply *reply;
+ struct qeth_reply *reply = NULL;
struct timer_list timer;
QETH_DBF_TEXT(trace, 2, "sendctl");
- qeth_setup_ccw(&card->write,iob->data,len);
-
- memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data),
- &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH);
- card->seqno.trans_hdr++;
-
- memcpy(QETH_PDU_HEADER_SEQ_NO(iob->data),
- &card->seqno.pdu_hdr, QETH_SEQ_NO_LENGTH);
- card->seqno.pdu_hdr++;
- memcpy(QETH_PDU_HEADER_ACK_SEQ_NO(iob->data),
- &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH);
- iob->callback = qeth_release_buffer;
-
reply = qeth_alloc_reply(card);
if (!reply) {
PRINT_WARN("Could no alloc qeth_reply!\n");
@@ -1810,10 +1828,6 @@
init_timer(&timer);
timer.function = qeth_cmd_timeout;
timer.data = (unsigned long) reply;
- if (IS_IPA(iob->data))
- timer.expires = jiffies + QETH_IPA_TIMEOUT;
- else
- timer.expires = jiffies + QETH_TIMEOUT;
init_waitqueue_head(&reply->wait_q);
spin_lock_irqsave(&card->lock, flags);
list_add_tail(&reply->list, &card->cmd_waiter_list);
@@ -1821,6 +1835,11 @@
QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN);
wait_event(card->wait_q,
atomic_compare_and_swap(0,1,&card->write.irq_pending) == 0);
+ qeth_prepare_control_data(card, len, iob);
+ if (IS_IPA(iob->data))
+ timer.expires = jiffies + QETH_IPA_TIMEOUT;
+ else
+ timer.expires = jiffies + QETH_TIMEOUT;
QETH_DBF_TEXT(trace, 6, "noirqpnd");
spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags);
rc = ccw_device_start(card->write.ccwdev, &card->write.ccw,
@@ -1848,6 +1867,62 @@
}
static int
+qeth_osn_send_control_data(struct qeth_card *card, int len,
+ struct qeth_cmd_buffer *iob)
+{
+ unsigned long flags;
+ int rc = 0;
+
+ QETH_DBF_TEXT(trace, 5, "osndctrd");
+
+ wait_event(card->wait_q,
+ atomic_compare_and_swap(0,1,&card->write.irq_pending) == 0);
+ qeth_prepare_control_data(card, len, iob);
+ QETH_DBF_TEXT(trace, 6, "osnoirqp");
+ spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags);
+ rc = ccw_device_start(card->write.ccwdev, &card->write.ccw,
+ (addr_t) iob, 0, 0);
+ spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags);
+ if (rc){
+ PRINT_WARN("qeth_osn_send_control_data: "
+ "ccw_device_start rc = %i\n", rc);
+ QETH_DBF_TEXT_(trace, 2, " err%d", rc);
+ qeth_release_buffer(iob->channel, iob);
+ atomic_set(&card->write.irq_pending, 0);
+ wake_up(&card->wait_q);
+ }
+ return rc;
+}
+
+static inline void
+qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
+ char prot_type)
+{
+ memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE);
+ memcpy(QETH_IPA_CMD_PROT_TYPE(iob->data),&prot_type,1);
+ memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data),
+ &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH);
+}
+
+static int
+qeth_osn_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
+ int data_len)
+{
+ u16 s1, s2;
+
+QETH_DBF_TEXT(trace,4,"osndipa");
+
+ qeth_prepare_ipa_cmd(card, iob, QETH_PROT_OSN2);
+ s1 = (u16)(IPA_PDU_HEADER_SIZE + data_len);
+ s2 = (u16)data_len;
+ memcpy(QETH_IPA_PDU_LEN_TOTAL(iob->data), &s1, 2);
+ memcpy(QETH_IPA_PDU_LEN_PDU1(iob->data), &s2, 2);
+ memcpy(QETH_IPA_PDU_LEN_PDU2(iob->data), &s2, 2);
+ memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2);
+ return qeth_osn_send_control_data(card, s1, iob);
+}
+
+static int
qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
int (*reply_cb)
(struct qeth_card *,struct qeth_reply*, unsigned long),
@@ -1858,17 +1933,14 @@
QETH_DBF_TEXT(trace,4,"sendipa");
- memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE);
-
if (card->options.layer2)
- prot_type = QETH_PROT_LAYER2;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ prot_type = QETH_PROT_OSN2;
+ else
+ prot_type = QETH_PROT_LAYER2;
else
prot_type = QETH_PROT_TCPIP;
-
- memcpy(QETH_IPA_CMD_PROT_TYPE(iob->data),&prot_type,1);
- memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data),
- &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH);
-
+ qeth_prepare_ipa_cmd(card,iob,prot_type);
rc = qeth_send_control_data(card, IPA_CMD_LENGTH, iob,
reply_cb, reply_param);
return rc;
@@ -2010,7 +2082,10 @@
*(QETH_ULP_ENABLE_LINKNUM(iob->data)) =
(__u8) card->info.portno;
if (card->options.layer2)
- prot_type = QETH_PROT_LAYER2;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ prot_type = QETH_PROT_OSN2;
+ else
+ prot_type = QETH_PROT_LAYER2;
else
prot_type = QETH_PROT_TCPIP;
@@ -2100,15 +2175,21 @@
}
static inline struct sk_buff *
-qeth_get_skb(unsigned int length)
+qeth_get_skb(unsigned int length, struct qeth_hdr *hdr)
{
struct sk_buff* skb;
+ int add_len;
+
+ add_len = 0;
+ if (hdr->hdr.osn.id == QETH_HEADER_TYPE_OSN)
+ add_len = sizeof(struct qeth_hdr);
#ifdef CONFIG_QETH_VLAN
- if ((skb = dev_alloc_skb(length + VLAN_HLEN)))
- skb_reserve(skb, VLAN_HLEN);
-#else
- skb = dev_alloc_skb(length);
+ else
+ add_len = VLAN_HLEN;
#endif
+ skb = dev_alloc_skb(length + add_len);
+ if (skb && add_len)
+ skb_reserve(skb, add_len);
return skb;
}
@@ -2138,7 +2219,10 @@
offset += sizeof(struct qeth_hdr);
if (card->options.layer2)
- skb_len = (*hdr)->hdr.l2.pkt_length;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ skb_len = (*hdr)->hdr.osn.pdu_length;
+ else
+ skb_len = (*hdr)->hdr.l2.pkt_length;
else
skb_len = (*hdr)->hdr.l3.length;
@@ -2146,15 +2230,15 @@
return NULL;
if (card->options.fake_ll){
if(card->dev->type == ARPHRD_IEEE802_TR){
- if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_TR)))
+ if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_TR, *hdr)))
goto no_mem;
skb_reserve(skb,QETH_FAKE_LL_LEN_TR);
} else {
- if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_ETH)))
+ if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_ETH, *hdr)))
goto no_mem;
skb_reserve(skb,QETH_FAKE_LL_LEN_ETH);
}
- } else if (!(skb = qeth_get_skb(skb_len)))
+ } else if (!(skb = qeth_get_skb(skb_len, *hdr)))
goto no_mem;
data_ptr = element->addr + offset;
while (skb_len) {
@@ -2453,8 +2537,12 @@
skb->dev = card->dev;
if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2)
vlan_tag = qeth_layer2_rebuild_skb(card, skb, hdr);
- else
+ else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)
qeth_rebuild_skb(card, skb, hdr);
+ else { /*in case of OSN*/
+ skb_push(skb, sizeof(struct qeth_hdr));
+ memcpy(skb->data, hdr, sizeof(struct qeth_hdr));
+ }
/* is device UP ? */
if (!(card->dev->flags & IFF_UP)){
dev_kfree_skb_any(skb);
@@ -2465,7 +2553,10 @@
vlan_hwaccel_rx(skb, card->vlangrp, vlan_tag);
else
#endif
- rxrc = netif_rx(skb);
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ rxrc = card->osn_info.data_cb(skb);
+ else
+ rxrc = netif_rx(skb);
card->dev->last_rx = jiffies;
card->stats.rx_packets++;
card->stats.rx_bytes += skb->len;
@@ -3150,8 +3241,6 @@
INIT_LIST_HEAD(&card->qdio.in_buf_pool.entry_list);
INIT_LIST_HEAD(&card->qdio.init_pool.entry_list);
/* outbound */
- card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT;
- card->qdio.default_out_queue = QETH_DEFAULT_QUEUE;
}
static int
@@ -3466,7 +3555,7 @@
return 0;
out_qdio:
- qeth_qdio_clear_card(card, card->info.type==QETH_CARD_TYPE_OSAE);
+ qeth_qdio_clear_card(card, card->info.type!=QETH_CARD_TYPE_IQD);
return rc;
}
@@ -3491,6 +3580,9 @@
case QETH_CARD_TYPE_IQD:
dev = alloc_netdev(0, "hsi%d", ether_setup);
break;
+ case QETH_CARD_TYPE_OSN:
+ dev = alloc_netdev(0, "osn%d", ether_setup);
+ break;
default:
dev = alloc_etherdev(0);
}
@@ -3655,7 +3747,8 @@
if (card->state != CARD_STATE_SOFTSETUP)
return -ENODEV;
- if ( (card->options.layer2) &&
+ if ( (card->info.type != QETH_CARD_TYPE_OSN) &&
+ (card->options.layer2) &&
(!card->info.layer2_mac_registered)) {
QETH_DBF_TEXT(trace,4,"nomacadr");
return -EPERM;
@@ -3693,6 +3786,9 @@
{
int cast_type = RTN_UNSPEC;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ return cast_type;
+
if (skb->dst && skb->dst->neighbour){
cast_type = skb->dst->neighbour->type;
if ((cast_type == RTN_BROADCAST) ||
@@ -3782,13 +3878,16 @@
qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb,
struct qeth_hdr **hdr, int ipv)
{
- int rc;
+ int rc = 0;
#ifdef CONFIG_QETH_VLAN
u16 *tag;
#endif
QETH_DBF_TEXT(trace, 6, "prepskb");
-
+ if (card->info.type == QETH_CARD_TYPE_OSN) {
+ *hdr = (struct qeth_hdr *)(*skb)->data;
+ return rc;
+ }
rc = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr));
if (rc)
return rc;
@@ -4291,8 +4390,14 @@
}
}
}
+ if ((card->info.type == QETH_CARD_TYPE_OSN) &&
+ (skb->protocol == htons(ETH_P_IPV6))) {
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
cast_type = qeth_get_cast_type(card, skb);
- if ((cast_type == RTN_BROADCAST) && (card->info.broadcast_capable == 0)){
+ if ((cast_type == RTN_BROADCAST) &&
+ (card->info.broadcast_capable == 0)){
card->stats.tx_dropped++;
card->stats.tx_errors++;
dev_kfree_skb_any(skb);
@@ -4320,7 +4425,8 @@
QETH_DBF_TEXT_(trace, 4, "pskbe%d", rc);
return rc;
}
- qeth_fill_header(card, hdr, skb, ipv, cast_type);
+ if (card->info.type != QETH_CARD_TYPE_OSN)
+ qeth_fill_header(card, hdr, skb, ipv, cast_type);
}
if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -4381,6 +4487,7 @@
case MII_BMCR: /* Basic mode control register */
rc = BMCR_FULLDPLX;
if ((card->info.link_type != QETH_LINK_TYPE_GBIT_ETH)&&
+ (card->info.link_type != QETH_LINK_TYPE_OSN) &&
(card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH))
rc |= BMCR_SPEED100;
break;
@@ -5004,6 +5111,9 @@
(card->state != CARD_STATE_SOFTSETUP))
return -ENODEV;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ return -EPERM;
+
switch (cmd){
case SIOC_QETH_ARP_SET_NO_ENTRIES:
if ( !capable(CAP_NET_ADMIN) ||
@@ -5329,6 +5439,9 @@
{
struct qeth_card *card = (struct qeth_card *) dev->priv;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ return ;
+
QETH_DBF_TEXT(trace,3,"setmulti");
qeth_delete_mc_addresses(card);
qeth_add_multicast_ipv4(card);
@@ -5370,6 +5483,94 @@
return addr;
}
+int
+qeth_osn_assist(struct net_device *dev,
+ void *data,
+ int data_len)
+{
+ struct qeth_cmd_buffer *iob;
+ struct qeth_card *card;
+ int rc;
+
+ QETH_DBF_TEXT(trace, 2, "osnsdmc");
+ if (!dev)
+ return -ENODEV;
+ card = (struct qeth_card *)dev->priv;
+ if (!card)
+ return -ENODEV;
+ if ((card->state != CARD_STATE_UP) &&
+ (card->state != CARD_STATE_SOFTSETUP))
+ return -ENODEV;
+ iob = qeth_wait_for_buffer(&card->write);
+ memcpy(iob->data+IPA_PDU_HEADER_SIZE, data, data_len);
+ rc = qeth_osn_send_ipa_cmd(card, iob, data_len);
+ return rc;
+}
+
+static struct net_device *
+qeth_netdev_by_devno(unsigned char *read_dev_no)
+{
+ struct qeth_card *card;
+ struct net_device *ndev;
+ unsigned char *readno;
+ __u16 temp_dev_no, card_dev_no;
+ char *endp;
+ unsigned long flags;
+
+ ndev = NULL;
+ memcpy(&temp_dev_no, read_dev_no, 2);
+ read_lock_irqsave(&qeth_card_list.rwlock, flags);
+ list_for_each_entry(card, &qeth_card_list.list, list) {
+ readno = CARD_RDEV_ID(card);
+ readno += (strlen(readno) - 4);
+ card_dev_no = simple_strtoul(readno, &endp, 16);
+ if (card_dev_no == temp_dev_no) {
+ ndev = card->dev;
+ break;
+ }
+ }
+ read_unlock_irqrestore(&qeth_card_list.rwlock, flags);
+ return ndev;
+}
+
+int
+qeth_osn_register(unsigned char *read_dev_no,
+ struct net_device **dev,
+ int (*assist_cb)(struct net_device *, void *),
+ int (*data_cb)(struct sk_buff *))
+{
+ struct qeth_card * card;
+
+ QETH_DBF_TEXT(trace, 2, "osnreg");
+ *dev = qeth_netdev_by_devno(read_dev_no);
+ if (*dev == NULL)
+ return -ENODEV;
+ card = (struct qeth_card *)(*dev)->priv;
+ if (!card)
+ return -ENODEV;
+ if ((assist_cb == NULL) || (data_cb == NULL))
+ return -EINVAL;
+ card->osn_info.assist_cb = assist_cb;
+ card->osn_info.data_cb = data_cb;
+ return 0;
+}
+
+void
+qeth_osn_deregister(struct net_device * dev)
+{
+ struct qeth_card *card;
+
+ QETH_DBF_TEXT(trace, 2, "osndereg");
+ if (!dev)
+ return;
+ card = (struct qeth_card *)dev->priv;
+ if (!card)
+ return;
+ card->osn_info.assist_cb = NULL;
+ card->osn_info.data_cb = NULL;
+ return;
+}
+
static void
qeth_delete_mc_addresses(struct qeth_card *card)
{
@@ -5700,6 +5901,12 @@
QETH_DBF_TEXT(trace, 3, "setmcLY3");
return -EOPNOTSUPP;
}
+ if (card->info.type == QETH_CARD_TYPE_OSN) {
+ PRINT_WARN("Setting MAC address on %s is not supported.\n",
+ dev->name);
+ QETH_DBF_TEXT(trace, 3, "setmcOSN");
+ return -EOPNOTSUPP;
+ }
QETH_DBF_TEXT_(trace, 3, "%s", CARD_BUS_ID(card));
QETH_DBF_HEX(trace, 3, addr->sa_data, OSA_ADDR_LEN);
rc = qeth_layer2_send_delmac(card, &card->dev->dev_addr[0]);
@@ -6076,9 +6283,8 @@
qeth_get_hlen(card->info.link_type) + card->options.add_hhlen;
dev->addr_len = OSA_ADDR_LEN;
dev->mtu = card->info.initial_mtu;
-
- SET_ETHTOOL_OPS(dev, &qeth_ethtool_ops);
-
+ if (card->info.type != QETH_CARD_TYPE_OSN)
+ SET_ETHTOOL_OPS(dev, &qeth_ethtool_ops);
SET_MODULE_OWNER(dev);
return 0;
}
@@ -6095,6 +6301,7 @@
QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT;
} else {
if (card->info.type == QETH_CARD_TYPE_IQD)
+ /*FIXME:why do we have same values for dis and ena for osae??? */
card->info.func_level =
QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT;
else
@@ -6124,7 +6331,7 @@
ccw_device_set_online(CARD_WDEV(card));
ccw_device_set_online(CARD_DDEV(card));
}
- rc = qeth_qdio_clear_card(card,card->info.type==QETH_CARD_TYPE_OSAE);
+ rc = qeth_qdio_clear_card(card,card->info.type!=QETH_CARD_TYPE_IQD);
if (rc == -ERESTARTSYS) {
QETH_DBF_TEXT(setup, 2, "break1");
return rc;
@@ -6176,8 +6383,8 @@
card->dev = qeth_get_netdevice(card->info.type,
card->info.link_type);
if (!card->dev){
- qeth_qdio_clear_card(card, card->info.type ==
- QETH_CARD_TYPE_OSAE);
+ qeth_qdio_clear_card(card, card->info.type !=
+ QETH_CARD_TYPE_IQD);
rc = -ENODEV;
QETH_DBF_TEXT_(setup, 2, "6err%d", rc);
goto out;
@@ -7084,6 +7291,8 @@
return rc;
} else
card->lan_online = 1;
+ if (card->info.type==QETH_CARD_TYPE_OSN)
+ goto out;
if (card->options.layer2) {
card->dev->features |=
NETIF_F_HW_VLAN_FILTER |
@@ -7255,7 +7464,8 @@
if (card->read.state == CH_STATE_UP &&
card->write.state == CH_STATE_UP &&
(card->state == CARD_STATE_UP)) {
- if(recovery_mode) {
+ if (recovery_mode &&
+ card->info.type != QETH_CARD_TYPE_OSN) {
qeth_stop(card->dev);
} else {
rtnl_lock();
@@ -7437,7 +7647,8 @@
{
QETH_DBF_TEXT(setup ,2, "startag");
- if(recovery_mode) {
+ if (recovery_mode &&
+ card->info.type != QETH_CARD_TYPE_OSN) {
qeth_open(card->dev);
} else {
rtnl_lock();
@@ -7469,33 +7680,36 @@
static void qeth_make_parameters_consistent(struct qeth_card *card)
{
- if (card->options.layer2) {
- if (card->info.type == QETH_CARD_TYPE_IQD) {
- PRINT_ERR("Device %s does not support " \
- "layer 2 functionality. " \
- "Ignoring layer2 option.\n",CARD_BUS_ID(card));
- }
- IGNORE_PARAM_NEQ(route4.type, NO_ROUTER, NO_ROUTER,
- "Routing options are");
+ if (card->options.layer2 == 0)
+ return;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ return;
+ if (card->info.type == QETH_CARD_TYPE_IQD) {
+ PRINT_ERR("Device %s does not support layer 2 functionality." \
+ " Ignoring layer2 option.\n",CARD_BUS_ID(card));
+ card->options.layer2 = 0;
+ return;
+ }
+ IGNORE_PARAM_NEQ(route4.type, NO_ROUTER, NO_ROUTER,
+ "Routing options are");
#ifdef CONFIG_QETH_IPV6
- IGNORE_PARAM_NEQ(route6.type, NO_ROUTER, NO_ROUTER,
- "Routing options are");
+ IGNORE_PARAM_NEQ(route6.type, NO_ROUTER, NO_ROUTER,
+ "Routing options are");
#endif
- IGNORE_PARAM_EQ(checksum_type, HW_CHECKSUMMING,
- QETH_CHECKSUM_DEFAULT,
- "Checksumming options are");
- IGNORE_PARAM_NEQ(broadcast_mode, QETH_TR_BROADCAST_ALLRINGS,
- QETH_TR_BROADCAST_ALLRINGS,
- "Broadcast mode options are");
- IGNORE_PARAM_NEQ(macaddr_mode, QETH_TR_MACADDR_NONCANONICAL,
- QETH_TR_MACADDR_NONCANONICAL,
- "Canonical MAC addr options are");
- IGNORE_PARAM_NEQ(fake_broadcast, 0, 0,
- "Broadcast faking options are");
- IGNORE_PARAM_NEQ(add_hhlen, DEFAULT_ADD_HHLEN,
- DEFAULT_ADD_HHLEN,"Option add_hhlen is");
- IGNORE_PARAM_NEQ(fake_ll, 0, 0,"Option fake_ll is");
- }
+ IGNORE_PARAM_EQ(checksum_type, HW_CHECKSUMMING,
+ QETH_CHECKSUM_DEFAULT,
+ "Checksumming options are");
+ IGNORE_PARAM_NEQ(broadcast_mode, QETH_TR_BROADCAST_ALLRINGS,
+ QETH_TR_BROADCAST_ALLRINGS,
+ "Broadcast mode options are");
+ IGNORE_PARAM_NEQ(macaddr_mode, QETH_TR_MACADDR_NONCANONICAL,
+ QETH_TR_MACADDR_NONCANONICAL,
+ "Canonical MAC addr options are");
+ IGNORE_PARAM_NEQ(fake_broadcast, 0, 0,
+ "Broadcast faking options are");
+ IGNORE_PARAM_NEQ(add_hhlen, DEFAULT_ADD_HHLEN,
+ DEFAULT_ADD_HHLEN,"Option add_hhlen is");
+ IGNORE_PARAM_NEQ(fake_ll, 0, 0,"Option fake_ll is");
}
@@ -7525,8 +7739,7 @@
return -EIO;
}
- if (card->options.layer2)
- qeth_make_parameters_consistent(card);
+ qeth_make_parameters_consistent(card);
if ((rc = qeth_hardsetup_card(card))){
QETH_DBF_TEXT_(setup, 2, "2err%d", rc);
@@ -7585,6 +7798,7 @@
static struct ccw_device_id qeth_ids[] = {
{CCW_DEVICE(0x1731, 0x01), driver_info:QETH_CARD_TYPE_OSAE},
{CCW_DEVICE(0x1731, 0x05), driver_info:QETH_CARD_TYPE_IQD},
+ {CCW_DEVICE(0x1731, 0x06), driver_info:QETH_CARD_TYPE_OSN},
{},
};
MODULE_DEVICE_TABLE(ccw, qeth_ids);
@@ -8329,6 +8543,9 @@
printk("qeth: removed\n");
}
+EXPORT_SYMBOL(qeth_osn_register);
+EXPORT_SYMBOL(qeth_osn_deregister);
+EXPORT_SYMBOL(qeth_osn_assist);
module_init(qeth_init);
module_exit(qeth_exit);
MODULE_AUTHOR("Frank Pavlic <pavlic@de.ibm.com>");
diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c
index f685ecc..30e053d 100644
--- a/drivers/s390/net/qeth_mpc.c
+++ b/drivers/s390/net/qeth_mpc.c
@@ -11,7 +11,7 @@
#include <asm/cio.h>
#include "qeth_mpc.h"
-const char *VERSION_QETH_MPC_C = "$Revision: 1.11 $";
+const char *VERSION_QETH_MPC_C = "$Revision: 1.12 $";
unsigned char IDX_ACTIVATE_READ[]={
0x00,0x00,0x80,0x00, 0x00,0x00,0x00,0x00,
@@ -138,7 +138,9 @@
sizeof(struct qeth_ipa_cmd)%256,
0x00,
sizeof(struct qeth_ipa_cmd)/256,
- sizeof(struct qeth_ipa_cmd),0x05, 0x77,0x77,0x77,0x77,
+ sizeof(struct qeth_ipa_cmd)%256,
+ 0x05,
+ 0x77,0x77,0x77,0x77,
0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,
0x01,0x00,
sizeof(struct qeth_ipa_cmd)/256,
diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h
index 3d916b5..7edc5f1 100644
--- a/drivers/s390/net/qeth_mpc.h
+++ b/drivers/s390/net/qeth_mpc.h
@@ -46,13 +46,16 @@
/* IP Assist related definitions */
/*****************************************************************************/
#define IPA_CMD_INITIATOR_HOST 0x00
-#define IPA_CMD_INITIATOR_HYDRA 0x01
+#define IPA_CMD_INITIATOR_OSA 0x01
+#define IPA_CMD_INITIATOR_HOST_REPLY 0x80
+#define IPA_CMD_INITIATOR_OSA_REPLY 0x81
#define IPA_CMD_PRIM_VERSION_NO 0x01
enum qeth_card_types {
QETH_CARD_TYPE_UNKNOWN = 0,
QETH_CARD_TYPE_OSAE = 10,
QETH_CARD_TYPE_IQD = 1234,
+ QETH_CARD_TYPE_OSN = 11,
};
#define QETH_MPC_DIFINFO_LEN_INDICATES_LINK_TYPE 0x18
@@ -61,6 +64,7 @@
QETH_LINK_TYPE_FAST_ETH = 0x01,
QETH_LINK_TYPE_HSTR = 0x02,
QETH_LINK_TYPE_GBIT_ETH = 0x03,
+ QETH_LINK_TYPE_OSN = 0x04,
QETH_LINK_TYPE_10GBIT_ETH = 0x10,
QETH_LINK_TYPE_LANE_ETH100 = 0x81,
QETH_LINK_TYPE_LANE_TR = 0x82,
@@ -111,6 +115,9 @@
IPA_CMD_DELGMAC = 0x24,
IPA_CMD_SETVLAN = 0x25,
IPA_CMD_DELVLAN = 0x26,
+ IPA_CMD_SETCCID = 0x41,
+ IPA_CMD_DELCCID = 0x42,
+ IPA_CMD_MODCCID = 0x43,
IPA_CMD_SETIP = 0xb1,
IPA_CMD_DELIP = 0xb7,
IPA_CMD_QIPASSIST = 0xb2,
@@ -437,8 +444,9 @@
#define QETH_ARP_DATA_SIZE 3968
#define QETH_ARP_CMD_LEN (QETH_ARP_DATA_SIZE + 8)
/* Helper functions */
-#define IS_IPA_REPLY(cmd) (cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST)
-
+#define IS_IPA_REPLY(cmd) ((cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) || \
+ (cmd->hdr.initiator == IPA_CMD_INITIATOR_OSA_REPLY))
+
/*****************************************************************************/
/* END OF IP Assist related definitions */
/*****************************************************************************/
@@ -483,6 +491,7 @@
/* Layer 2 defintions */
#define QETH_PROT_LAYER2 0x08
#define QETH_PROT_TCPIP 0x03
+#define QETH_PROT_OSN2 0x0a
#define QETH_ULP_ENABLE_PROT_TYPE(buffer) (buffer+0x50)
#define QETH_IPA_CMD_PROT_TYPE(buffer) (buffer+0x19)
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index dda105b..f91a02d 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -1,6 +1,6 @@
/*
*
- * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.54 $)
+ * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.55 $)
*
* Linux on zSeries OSA Express and HiperSockets support
* This file contains code related to sysfs.
@@ -20,7 +20,7 @@
#include "qeth_mpc.h"
#include "qeth_fs.h"
-const char *VERSION_QETH_SYS_C = "$Revision: 1.54 $";
+const char *VERSION_QETH_SYS_C = "$Revision: 1.55 $";
/*****************************************************************************/
/* */
@@ -937,6 +937,19 @@
.attrs = (struct attribute **)qeth_device_attrs,
};
+static struct device_attribute * qeth_osn_device_attrs[] = {
+ &dev_attr_state,
+ &dev_attr_chpid,
+ &dev_attr_if_name,
+ &dev_attr_card_type,
+ &dev_attr_buffer_count,
+ &dev_attr_recover,
+ NULL,
+};
+
+static struct attribute_group qeth_osn_device_attr_group = {
+ .attrs = (struct attribute **)qeth_osn_device_attrs,
+};
#define QETH_DEVICE_ATTR(_id,_name,_mode,_show,_store) \
struct device_attribute dev_attr_##_id = { \
@@ -1667,7 +1680,12 @@
qeth_create_device_attributes(struct device *dev)
{
int ret;
+ struct qeth_card *card = dev->driver_data;
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ return sysfs_create_group(&dev->kobj,
+ &qeth_osn_device_attr_group);
+
if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_attr_group)))
return ret;
if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_ipato_group))){
@@ -1693,6 +1711,12 @@
void
qeth_remove_device_attributes(struct device *dev)
{
+ struct qeth_card *card = dev->driver_data;
+
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ return sysfs_remove_group(&dev->kobj,
+ &qeth_osn_device_attr_group);
+
sysfs_remove_group(&dev->kobj, &qeth_device_attr_group);
sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group);
sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 3ee9b8b..9c9f162 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -489,11 +489,11 @@
If unsure, say N.
-config SCSI_SATA_PROMISE
- tristate "Promise SATA TX2/TX4 support"
+config SCSI_PDC_ADMA
+ tristate "Pacific Digital ADMA support"
depends on SCSI_SATA && PCI
help
- This option enables support for Promise Serial ATA TX2/TX4.
+ This option enables support for Pacific Digital ADMA controllers
If unsure, say N.
@@ -505,6 +505,14 @@
If unsure, say N.
+config SCSI_SATA_PROMISE
+ tristate "Promise SATA TX2/TX4 support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Promise Serial ATA TX2/TX4.
+
+ If unsure, say N.
+
config SCSI_SATA_SX4
tristate "Promise SATA SX4 support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
@@ -521,6 +529,14 @@
If unsure, say N.
+config SCSI_SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
+
+ If unsure, say N.
+
config SCSI_SATA_SIS
tristate "SiS 964/180 SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 48529d1..2d44398 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -130,6 +130,7 @@
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
+obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
@@ -137,6 +138,7 @@
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
+obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index c2c8fa8..e2a5657 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -41,6 +41,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -192,7 +193,6 @@
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
-static u8 ahci_check_err(struct ata_port *ap);
static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
static void ahci_remove_one (struct pci_dev *pdev);
@@ -216,12 +216,11 @@
.ordered_flush = 1,
};
-static struct ata_port_operations ahci_ops = {
+static const struct ata_port_operations ahci_ops = {
.port_disable = ata_port_disable,
.check_status = ahci_check_status,
.check_altstatus = ahci_check_status,
- .check_err = ahci_check_err,
.dev_select = ata_noop_dev_select,
.tf_read = ahci_tf_read,
@@ -407,7 +406,7 @@
return 0xffffffffU;
}
- return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -425,7 +424,7 @@
return;
}
- writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void ahci_phy_reset(struct ata_port *ap)
@@ -453,18 +452,11 @@
static u8 ahci_check_status(struct ata_port *ap)
{
- void *mmio = (void *) ap->ioaddr.cmd_addr;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
return readl(mmio + PORT_TFDATA) & 0xFF;
}
-static u8 ahci_check_err(struct ata_port *ap)
-{
- void *mmio = (void *) ap->ioaddr.cmd_addr;
-
- return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF;
-}
-
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ahci_port_priv *pp = ap->private_data;
@@ -609,7 +601,7 @@
* not being called from the SCSI EH.
*/
qc->scsidone = scsi_finish_command;
- ata_qc_complete(qc, ATA_ERR);
+ ata_qc_complete(qc, AC_ERR_OTHER);
}
spin_unlock_irqrestore(&host_set->lock, flags);
@@ -638,7 +630,7 @@
if (status & PORT_IRQ_FATAL) {
ahci_intr_error(ap, status);
if (qc)
- ata_qc_complete(qc, ATA_ERR);
+ ata_qc_complete(qc, AC_ERR_OTHER);
}
return 1;
@@ -672,17 +664,35 @@
for (i = 0; i < host_set->n_ports; i++) {
struct ata_port *ap;
- u32 tmp;
- VPRINTK("port %u\n", i);
+ if (!(irq_stat & (1 << i)))
+ continue;
+
ap = host_set->ports[i];
- tmp = irq_stat & (1 << i);
- if (tmp && ap) {
+ if (ap) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (ahci_host_intr(ap, qc))
- irq_ack |= (1 << i);
+ if (!ahci_host_intr(ap, qc))
+ if (ata_ratelimit()) {
+ struct pci_dev *pdev =
+ to_pci_dev(ap->host_set->dev);
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "unhandled interrupt on port %u\n",
+ i);
+ }
+
+ VPRINTK("port %u\n", i);
+ } else {
+ VPRINTK("port %u (no irq)\n", i);
+ if (ata_ratelimit()) {
+ struct pci_dev *pdev =
+ to_pci_dev(ap->host_set->dev);
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "interrupt on disabled port %u\n", i);
+ }
}
+
+ irq_ack |= (1 << i);
}
if (irq_ack) {
@@ -750,8 +760,8 @@
tmp = readl(mmio + HOST_CTL);
if (tmp & HOST_RESET) {
- printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n",
- pci_name(pdev), tmp);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "controller reset failed (0x%x)\n", tmp);
return -EIO;
}
@@ -779,22 +789,22 @@
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
return rc;
}
}
@@ -897,10 +907,10 @@
else
scc_s = "unknown";
- printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x "
+ dev_printk(KERN_INFO, &pdev->dev,
+ "AHCI %02x%02x.%02x%02x "
"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
,
- pci_name(pdev),
(vers >> 24) & 0xff,
(vers >> 16) & 0xff,
@@ -913,11 +923,11 @@
impl,
scc_s);
- printk(KERN_INFO DRV_NAME "(%s) flags: "
+ dev_printk(KERN_INFO, &pdev->dev,
+ "flags: "
"%s%s%s%s%s%s"
"%s%s%s%s%s%s%s\n"
,
- pci_name(pdev),
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
@@ -950,7 +960,7 @@
VPRINTK("ENTER\n");
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index 48e1c4d..1993764 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -10,6 +10,8 @@
* Commonly used scsi driver functions.
*/
+#include <linux/scatterlist.h>
+
#define BELT_AND_BRACES
/*
@@ -22,9 +24,7 @@
BUG_ON(bufs + 1 > max);
- sg->page = virt_to_page(SCp->ptr);
- sg->offset = offset_in_page(SCp->ptr);
- sg->length = SCp->this_residual;
+ sg_set_buf(sg, SCp->ptr, SCp->this_residual);
if (bufs)
memcpy(sg + 1, SCp->buffer + 1,
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index d71cef7..7f8aa1b 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -45,6 +45,7 @@
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -147,7 +148,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations piix_pata_ops = {
+static const struct ata_port_operations piix_pata_ops = {
.port_disable = ata_port_disable,
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
@@ -177,7 +178,7 @@
.host_stop = ata_host_stop,
};
-static struct ata_port_operations piix_sata_ops = {
+static const struct ata_port_operations piix_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -621,18 +622,19 @@
{
static int printed_version;
struct ata_port_info *port_info[2];
- unsigned int combined = 0, n_ports = 1;
+ unsigned int combined = 0;
unsigned int pata_chan = 0, sata_chan = 0;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
/* no hotplugging support (FIXME) */
if (!in_module_init)
return -ENODEV;
port_info[0] = &piix_port_info[ent->driver_data];
- port_info[1] = NULL;
+ port_info[1] = &piix_port_info[ent->driver_data];
if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
u8 tmp;
@@ -670,12 +672,13 @@
port_info[sata_chan] = &piix_port_info[ent->driver_data];
port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS;
port_info[pata_chan] = &piix_port_info[ich5_pata];
- n_ports++;
- printk(KERN_WARNING DRV_NAME ": combined mode detected\n");
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "combined mode detected (p=%u, s=%u)\n",
+ pata_chan, sata_chan);
}
- return ata_pci_init_one(pdev, port_info, n_ports);
+ return ata_pci_init_one(pdev, port_info, 2);
}
static int __init piix_init(void)
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index da6e51c..540147c 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -936,7 +936,7 @@
if (init)
ch_init_elem(ch);
- class_device_create(ch_sysfs_class,
+ class_device_create(ch_sysfs_class, NULL,
MKDEV(SCSI_CHANGER_MAJOR,ch->minor),
dev, "s%s", ch->name);
diff --git a/drivers/scsi/dec_esp.c b/drivers/scsi/dec_esp.c
index 315f95a..4f39890 100644
--- a/drivers/scsi/dec_esp.c
+++ b/drivers/scsi/dec_esp.c
@@ -228,7 +228,7 @@
mem_start = get_tc_base_addr(slot);
/* Store base addr into esp struct */
- esp->slot = PHYSADDR(mem_start);
+ esp->slot = CPHYSADDR(mem_start);
esp->dregs = 0;
esp->eregs = (struct ESP_regs *) (mem_start + DEC_SCSI_SREG);
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index c10e45b..3d13fde 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1357,7 +1357,7 @@
for (i = 0; i < shost->can_queue; i++) {
size_t sz = shost->sg_tablesize *sizeof(struct sg_list);
- unsigned int gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC;
+ gfp_t gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC;
ha->cp[i].sglist = kmalloc(sz, gfp_mask);
if (!ha->cp[i].sglist) {
printk
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 02fe371..f24d845 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -287,7 +287,8 @@
struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)
{
struct Scsi_Host *shost;
- int gfp_mask = GFP_KERNEL, rval;
+ gfp_t gfp_mask = GFP_KERNEL;
+ int rval;
if (sht->unchecked_isa_dma && privsize)
gfp_mask |= __GFP_DMA;
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 3d62c9b..00d6a66 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -180,19 +180,12 @@
return;
}
count = min(pc->sg->length - pc->b_count, bcount);
- if (PageHighMem(pc->sg->page)) {
- unsigned long flags;
-
- local_irq_save(flags);
- buf = kmap_atomic(pc->sg->page, KM_IRQ0) + pc->sg->offset;
- drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count);
- kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
- local_irq_restore(flags);
- } else {
- buf = page_address(pc->sg->page) + pc->sg->offset;
- drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count);
- }
- bcount -= count; pc->b_count += count;
+ buf = kmap_atomic(pc->sg->page, KM_IRQ0);
+ drive->hwif->atapi_input_bytes(drive,
+ buf + pc->b_count + pc->sg->offset, count);
+ kunmap_atomic(buf, KM_IRQ0);
+ bcount -= count;
+ pc->b_count += count;
if (pc->b_count == pc->sg->length) {
pc->sg++;
pc->b_count = 0;
@@ -212,19 +205,12 @@
return;
}
count = min(pc->sg->length - pc->b_count, bcount);
- if (PageHighMem(pc->sg->page)) {
- unsigned long flags;
-
- local_irq_save(flags);
- buf = kmap_atomic(pc->sg->page, KM_IRQ0) + pc->sg->offset;
- drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count);
- kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
- local_irq_restore(flags);
- } else {
- buf = page_address(pc->sg->page) + pc->sg->offset;
- drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count);
- }
- bcount -= count; pc->b_count += count;
+ buf = kmap_atomic(pc->sg->page, KM_IRQ0);
+ drive->hwif->atapi_output_bytes(drive,
+ buf + pc->b_count + pc->sg->offset, count);
+ kunmap_atomic(buf, KM_IRQ0);
+ bcount -= count;
+ pc->b_count += count;
if (pc->b_count == pc->sg->length) {
pc->sg++;
pc->b_count = 0;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index babd483..e0039df 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4944,6 +4944,7 @@
int rc;
ENTER;
+ pci_unblock_user_cfg_access(ioa_cfg->pdev);
rc = pci_restore_state(ioa_cfg->pdev);
if (rc != PCIBIOS_SUCCESSFUL) {
@@ -4998,6 +4999,7 @@
int rc;
ENTER;
+ pci_block_user_cfg_access(ioa_cfg->pdev);
rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
if (rc != PCIBIOS_SUCCESSFUL) {
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index 4cbb618..459a4da 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -98,7 +98,7 @@
static int __init
lasi700_probe(struct parisc_device *dev)
{
- unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET;
+ unsigned long base = dev->hpa.start + LASI_SCSI_CORE_OFFSET;
struct NCR_700_Host_Parameters *hostdata;
struct Scsi_Host *host;
@@ -125,8 +125,6 @@
hostdata->dmode_extra = DMODE_FC2;
}
- NCR_700_set_mem_mapped(hostdata);
-
host = NCR_700_detect(&lasi700_template, hostdata, &dev->dev);
if (!host)
goto out_kfree;
@@ -168,7 +166,7 @@
}
static struct parisc_driver lasi700_driver = {
- .name = "Lasi SCSI",
+ .name = "lasi_scsi",
.id_table = lasi700_ids,
.probe = lasi700_probe,
.remove = __devexit_p(lasi700_driver_remove),
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index e5b0199..8be7dc0 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -48,6 +48,8 @@
#include <linux/completion.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/scatterlist.h>
#include <scsi/scsi.h>
#include "scsi.h"
#include "scsi_priv.h"
@@ -62,14 +64,15 @@
static unsigned int ata_busy_sleep (struct ata_port *ap,
unsigned long tmout_pat,
unsigned long tmout);
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev);
+static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
static void ata_set_mode(struct ata_port *ap);
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift);
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift);
static int fgb(u32 bitmap);
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out);
-static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat);
static void __ata_qc_complete(struct ata_queued_cmd *qc);
static unsigned int ata_unique_id = 1;
@@ -85,7 +88,7 @@
MODULE_VERSION(DRV_VERSION);
/**
- * ata_tf_load - send taskfile registers to host controller
+ * ata_tf_load_pio - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
@@ -95,7 +98,7 @@
* Inherited from caller.
*/
-static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -153,7 +156,7 @@
* Inherited from caller.
*/
-static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -222,7 +225,7 @@
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
ata_tf_load_mmio(ap, tf);
@@ -242,7 +245,7 @@
* spin_lock_irqsave(host_set lock)
*/
-static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
@@ -263,7 +266,7 @@
* spin_lock_irqsave(host_set lock)
*/
-static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
@@ -283,7 +286,7 @@
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
ata_exec_command_mmio(ap, tf);
@@ -303,7 +306,7 @@
* Obtains host_set lock.
*/
-static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf)
+static inline void ata_exec(struct ata_port *ap, const struct ata_taskfile *tf)
{
unsigned long flags;
@@ -326,7 +329,7 @@
* Obtains host_set lock.
*/
-static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_to_host(struct ata_port *ap, const struct ata_taskfile *tf)
{
ap->ops->tf_load(ap, tf);
@@ -346,7 +349,7 @@
* spin_lock_irqsave(host_set lock)
*/
-void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf)
{
ap->ops->tf_load(ap, tf);
ap->ops->exec_command(ap, tf);
@@ -368,6 +371,8 @@
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = inb(ioaddr->error_addr);
tf->nsect = inb(ioaddr->nsect_addr);
tf->lbal = inb(ioaddr->lbal_addr);
tf->lbam = inb(ioaddr->lbam_addr);
@@ -400,6 +405,8 @@
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = readb((void __iomem *)ioaddr->error_addr);
tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
@@ -520,30 +527,6 @@
/**
- * ata_chk_err - Read device error reg
- * @ap: port where the device is
- *
- * Reads ATA taskfile error register for
- * currently-selected device and return its value.
- *
- * Note: may NOT be used as the check_err() entry in
- * ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-u8 ata_chk_err(struct ata_port *ap)
-{
- if (ap->ops->check_err)
- return ap->ops->check_err(ap);
-
- if (ap->flags & ATA_FLAG_MMIO) {
- return readb((void __iomem *) ap->ioaddr.error_addr);
- }
- return inb(ap->ioaddr.error_addr);
-}
-
-/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
* @fis: Buffer into which data will output
@@ -556,7 +539,7 @@
* Inherited from caller.
*/
-void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp)
+void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
{
fis[0] = 0x27; /* Register - Host to Device FIS */
fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
@@ -597,7 +580,7 @@
* Inherited from caller.
*/
-void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf)
+void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
{
tf->command = fis[2]; /* status */
tf->feature = fis[3]; /* error */
@@ -615,79 +598,53 @@
tf->hob_nsect = fis[13];
}
-/**
- * ata_prot_to_cmd - determine which read/write opcodes to use
- * @protocol: ATA_PROT_xxx taskfile protocol
- * @lba48: true is lba48 is present
- *
- * Given necessary input, determine which read/write commands
- * to use to transfer data.
- *
- * LOCKING:
- * None.
- */
-static int ata_prot_to_cmd(int protocol, int lba48)
-{
- int rcmd = 0, wcmd = 0;
-
- switch (protocol) {
- case ATA_PROT_PIO:
- if (lba48) {
- rcmd = ATA_CMD_PIO_READ_EXT;
- wcmd = ATA_CMD_PIO_WRITE_EXT;
- } else {
- rcmd = ATA_CMD_PIO_READ;
- wcmd = ATA_CMD_PIO_WRITE;
- }
- break;
-
- case ATA_PROT_DMA:
- if (lba48) {
- rcmd = ATA_CMD_READ_EXT;
- wcmd = ATA_CMD_WRITE_EXT;
- } else {
- rcmd = ATA_CMD_READ;
- wcmd = ATA_CMD_WRITE;
- }
- break;
-
- default:
- return -1;
- }
-
- return rcmd | (wcmd << 8);
-}
+static const u8 ata_rw_cmds[] = {
+ /* pio multi */
+ ATA_CMD_READ_MULTI,
+ ATA_CMD_WRITE_MULTI,
+ ATA_CMD_READ_MULTI_EXT,
+ ATA_CMD_WRITE_MULTI_EXT,
+ /* pio */
+ ATA_CMD_PIO_READ,
+ ATA_CMD_PIO_WRITE,
+ ATA_CMD_PIO_READ_EXT,
+ ATA_CMD_PIO_WRITE_EXT,
+ /* dma */
+ ATA_CMD_READ,
+ ATA_CMD_WRITE,
+ ATA_CMD_READ_EXT,
+ ATA_CMD_WRITE_EXT
+};
/**
- * ata_dev_set_protocol - set taskfile protocol and r/w commands
- * @dev: device to examine and configure
+ * ata_rwcmd_protocol - set taskfile r/w commands and protocol
+ * @qc: command to examine and configure
*
- * Examine the device configuration, after we have
- * read the identify-device page and configured the
- * data transfer mode. Set internal state related to
- * the ATA taskfile protocol (pio, pio mult, dma, etc.)
- * and calculate the proper read/write commands to use.
+ * Examine the device configuration and tf->flags to calculate
+ * the proper read/write commands and protocol to use.
*
* LOCKING:
* caller.
*/
-static void ata_dev_set_protocol(struct ata_device *dev)
+void ata_rwcmd_protocol(struct ata_queued_cmd *qc)
{
- int pio = (dev->flags & ATA_DFLAG_PIO);
- int lba48 = (dev->flags & ATA_DFLAG_LBA48);
- int proto, cmd;
+ struct ata_taskfile *tf = &qc->tf;
+ struct ata_device *dev = qc->dev;
- if (pio)
- proto = dev->xfer_protocol = ATA_PROT_PIO;
- else
- proto = dev->xfer_protocol = ATA_PROT_DMA;
+ int index, lba48, write;
+
+ lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
+ write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
- cmd = ata_prot_to_cmd(proto, lba48);
- if (cmd < 0)
- BUG();
+ if (dev->flags & ATA_DFLAG_PIO) {
+ tf->protocol = ATA_PROT_PIO;
+ index = dev->multi_count ? 0 : 4;
+ } else {
+ tf->protocol = ATA_PROT_DMA;
+ index = 8;
+ }
- dev->read_cmd = cmd & 0xff;
- dev->write_cmd = (cmd >> 8) & 0xff;
+ tf->command = ata_rw_cmds[index + lba48 + write];
}
static const char * xfer_mode_str[] = {
@@ -869,7 +826,7 @@
* the event of failure.
*/
-unsigned int ata_dev_classify(struct ata_taskfile *tf)
+unsigned int ata_dev_classify(const struct ata_taskfile *tf)
{
/* Apple's open source Darwin code hints that some devices only
* put a proper signature into the LBA mid/high registers,
@@ -921,8 +878,8 @@
memset(&tf, 0, sizeof(tf));
- err = ata_chk_err(ap);
ap->ops->tf_read(ap, &tf);
+ err = tf.feature;
dev->class = ATA_DEV_NONE;
@@ -961,7 +918,7 @@
* caller.
*/
-void ata_dev_id_string(u16 *id, unsigned char *s,
+void ata_dev_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len)
{
unsigned int c;
@@ -1078,7 +1035,7 @@
* caller.
*/
-static inline void ata_dump_id(struct ata_device *dev)
+static inline void ata_dump_id(const struct ata_device *dev)
{
DPRINTK("49==0x%04x "
"53==0x%04x "
@@ -1106,6 +1063,31 @@
dev->id[93]);
}
+/*
+ * Compute the PIO modes available for this device. This is not as
+ * trivial as it seems if we must consider early devices correctly.
+ *
+ * FIXME: pre IDE drive timing (do we care ?).
+ */
+
+static unsigned int ata_pio_modes(const struct ata_device *adev)
+{
+ u16 modes;
+
+ /* Usual case. Word 53 indicates word 88 is valid */
+ if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) {
+ modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
+ modes <<= 3;
+ modes |= 0x7;
+ return modes;
+ }
+
+ /* If word 88 isn't valid then Word 51 holds the PIO timing number
+ for the maximum. Turn it into a mask and return it */
+ modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+ return modes;
+}
+
/**
* ata_dev_identify - obtain IDENTIFY x DEVICE page
* @ap: port on which device we wish to probe resides
@@ -1131,10 +1113,9 @@
static void ata_dev_identify(struct ata_port *ap, unsigned int device)
{
struct ata_device *dev = &ap->device[device];
- unsigned int i;
+ unsigned int major_version;
u16 tmp;
unsigned long xfer_modes;
- u8 status;
unsigned int using_edd;
DECLARE_COMPLETION(wait);
struct ata_queued_cmd *qc;
@@ -1188,8 +1169,11 @@
else
wait_for_completion(&wait);
- status = ata_chk_status(ap);
- if (status & ATA_ERR) {
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->ops->tf_read(ap, &qc->tf);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (qc->tf.command & ATA_ERR) {
/*
* arg! EDD works for all test cases, but seems to return
* the ATA signature for some ATAPI devices. Until the
@@ -1202,7 +1186,7 @@
* to have this problem.
*/
if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) {
- u8 err = ata_chk_err(ap);
+ u8 err = qc->tf.feature;
if (err & ATA_ABORTED) {
dev->class = ATA_DEV_ATAPI;
qc->cursg = 0;
@@ -1229,9 +1213,9 @@
* common ATA, ATAPI feature tests
*/
- /* we require LBA and DMA support (bits 8 & 9 of word 49) */
- if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) {
- printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id);
+ /* we require DMA support (bits 8 of word 49) */
+ if (!ata_id_has_dma(dev->id)) {
+ printk(KERN_DEBUG "ata%u: no dma\n", ap->id);
goto err_out_nosup;
}
@@ -1239,10 +1223,8 @@
xfer_modes = dev->id[ATA_ID_UDMA_MODES];
if (!xfer_modes)
xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA;
- if (!xfer_modes) {
- xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3);
- xfer_modes |= (0x7 << ATA_SHIFT_PIO);
- }
+ if (!xfer_modes)
+ xfer_modes = ata_pio_modes(dev);
ata_dump_id(dev);
@@ -1251,32 +1233,75 @@
if (!ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
+ /* get major version */
tmp = dev->id[ATA_ID_MAJOR_VER];
- for (i = 14; i >= 1; i--)
- if (tmp & (1 << i))
+ for (major_version = 14; major_version >= 1; major_version--)
+ if (tmp & (1 << major_version))
break;
- /* we require at least ATA-3 */
- if (i < 3) {
- printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id);
- goto err_out_nosup;
+ /*
+ * The exact sequence expected by certain pre-ATA4 drives is:
+ * SRST RESET
+ * IDENTIFY
+ * INITIALIZE DEVICE PARAMETERS
+ * anything else..
+ * Some drives were very specific about that exact sequence.
+ */
+ if (major_version < 4 || (!ata_id_has_lba(dev->id))) {
+ ata_dev_init_params(ap, dev);
+
+ /* current CHS translation info (id[53-58]) might be
+ * changed. reread the identify device info.
+ */
+ ata_dev_reread_id(ap, dev);
}
- if (ata_id_has_lba48(dev->id)) {
- dev->flags |= ATA_DFLAG_LBA48;
- dev->n_sectors = ata_id_u64(dev->id, 100);
- } else {
- dev->n_sectors = ata_id_u32(dev->id, 60);
+ if (ata_id_has_lba(dev->id)) {
+ dev->flags |= ATA_DFLAG_LBA;
+
+ if (ata_id_has_lba48(dev->id)) {
+ dev->flags |= ATA_DFLAG_LBA48;
+ dev->n_sectors = ata_id_u64(dev->id, 100);
+ } else {
+ dev->n_sectors = ata_id_u32(dev->id, 60);
+ }
+
+ /* print device info to dmesg */
+ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n",
+ ap->id, device,
+ major_version,
+ ata_mode_string(xfer_modes),
+ (unsigned long long)dev->n_sectors,
+ dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA");
+ } else {
+ /* CHS */
+
+ /* Default translation */
+ dev->cylinders = dev->id[1];
+ dev->heads = dev->id[3];
+ dev->sectors = dev->id[6];
+ dev->n_sectors = dev->cylinders * dev->heads * dev->sectors;
+
+ if (ata_id_current_chs_valid(dev->id)) {
+ /* Current CHS translation is valid. */
+ dev->cylinders = dev->id[54];
+ dev->heads = dev->id[55];
+ dev->sectors = dev->id[56];
+
+ dev->n_sectors = ata_id_u32(dev->id, 57);
+ }
+
+ /* print device info to dmesg */
+ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n",
+ ap->id, device,
+ major_version,
+ ata_mode_string(xfer_modes),
+ (unsigned long long)dev->n_sectors,
+ (int)dev->cylinders, (int)dev->heads, (int)dev->sectors);
+
}
ap->host->max_cmd_len = 16;
-
- /* print device info to dmesg */
- printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n",
- ap->id, device,
- ata_mode_string(xfer_modes),
- (unsigned long long)dev->n_sectors,
- dev->flags & ATA_DFLAG_LBA48 ? " lba48" : "");
}
/* ATAPI-specific feature tests */
@@ -1310,7 +1335,7 @@
}
-static inline u8 ata_dev_knobble(struct ata_port *ap)
+static inline u8 ata_dev_knobble(const struct ata_port *ap)
{
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
}
@@ -1496,7 +1521,153 @@
ap->flags |= ATA_FLAG_PORT_DISABLED;
}
-static struct {
+/*
+ * This mode timing computation functionality is ported over from
+ * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
+ */
+/*
+ * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
+ * These were taken from ATA/ATAPI-6 standard, rev 0a, except
+ * for PIO 5, which is a nonstandard extension and UDMA6, which
+ * is currently supported only by Maxtor drives.
+ */
+
+static const struct ata_timing ata_timing[] = {
+
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+
+/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
+
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
+
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
+
+/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
+
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
+
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
+
+ { 0xFF }
+};
+
+#define ENOUGH(v,unit) (((v)-1)/(unit)+1)
+#define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
+
+static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
+{
+ q->setup = EZ(t->setup * 1000, T);
+ q->act8b = EZ(t->act8b * 1000, T);
+ q->rec8b = EZ(t->rec8b * 1000, T);
+ q->cyc8b = EZ(t->cyc8b * 1000, T);
+ q->active = EZ(t->active * 1000, T);
+ q->recover = EZ(t->recover * 1000, T);
+ q->cycle = EZ(t->cycle * 1000, T);
+ q->udma = EZ(t->udma * 1000, UT);
+}
+
+void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
+ struct ata_timing *m, unsigned int what)
+{
+ if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
+ if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
+ if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
+ if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
+ if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
+ if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+ if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
+ if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
+}
+
+static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
+{
+ const struct ata_timing *t;
+
+ for (t = ata_timing; t->mode != speed; t++)
+ if (t->mode == 0xFF)
+ return NULL;
+ return t;
+}
+
+int ata_timing_compute(struct ata_device *adev, unsigned short speed,
+ struct ata_timing *t, int T, int UT)
+{
+ const struct ata_timing *s;
+ struct ata_timing p;
+
+ /*
+ * Find the mode.
+ */
+
+ if (!(s = ata_timing_find_mode(speed)))
+ return -EINVAL;
+
+ /*
+ * If the drive is an EIDE drive, it can tell us it needs extended
+ * PIO/MW_DMA cycle timing.
+ */
+
+ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
+ memset(&p, 0, sizeof(p));
+ if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+ if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
+ else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
+ } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
+ p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
+ }
+ ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
+ }
+
+ /*
+ * Convert the timing to bus clock counts.
+ */
+
+ ata_timing_quantize(s, t, T, UT);
+
+ /*
+ * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T
+ * and some other commands. We have to ensure that the DMA cycle timing is
+ * slower/equal than the fastest PIO timing.
+ */
+
+ if (speed > XFER_PIO_4) {
+ ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
+ ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
+ }
+
+ /*
+ * Lenghten active & recovery time so that cycle time is correct.
+ */
+
+ if (t->act8b + t->rec8b < t->cyc8b) {
+ t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
+ t->rec8b = t->cyc8b - t->act8b;
+ }
+
+ if (t->active + t->recover < t->cycle) {
+ t->active += (t->cycle - (t->active + t->recover)) / 2;
+ t->recover = t->cycle - t->active;
+ }
+
+ return 0;
+}
+
+static const struct {
unsigned int shift;
u8 base;
} xfer_mode_classes[] = {
@@ -1603,7 +1774,7 @@
*/
static void ata_set_mode(struct ata_port *ap)
{
- unsigned int i, xfer_shift;
+ unsigned int xfer_shift;
u8 xfer_mode;
int rc;
@@ -1632,11 +1803,6 @@
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
- for (i = 0; i < 2; i++) {
- struct ata_device *dev = &ap->device[i];
- ata_dev_set_protocol(dev);
- }
-
return;
err_out:
@@ -1910,7 +2076,8 @@
DPRINTK("EXIT\n");
}
-static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static void ata_pr_blacklisted(const struct ata_port *ap,
+ const struct ata_device *dev)
{
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
ap->id, dev->devno);
@@ -1948,7 +2115,7 @@
"_NEC DV5800A",
};
-static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static int ata_dma_blacklisted(const struct ata_device *dev)
{
unsigned char model_num[40];
char *s;
@@ -1973,9 +2140,9 @@
return 0;
}
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift)
{
- struct ata_device *master, *slave;
+ const struct ata_device *master, *slave;
unsigned int mask;
master = &ap->device[0];
@@ -1987,14 +2154,14 @@
mask = ap->udma_mask;
if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dma_blacklisted(ap, master)) {
+ if (ata_dma_blacklisted(master)) {
mask = 0;
ata_pr_blacklisted(ap, master);
}
}
if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dma_blacklisted(ap, slave)) {
+ if (ata_dma_blacklisted(slave)) {
mask = 0;
ata_pr_blacklisted(ap, slave);
}
@@ -2004,14 +2171,14 @@
mask = ap->mwdma_mask;
if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dma_blacklisted(ap, master)) {
+ if (ata_dma_blacklisted(master)) {
mask = 0;
ata_pr_blacklisted(ap, master);
}
}
if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dma_blacklisted(ap, slave)) {
+ if (ata_dma_blacklisted(slave)) {
mask = 0;
ata_pr_blacklisted(ap, slave);
}
@@ -2075,7 +2242,7 @@
* Zero on success, negative on error.
*/
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out)
{
@@ -2144,6 +2311,110 @@
}
/**
+ * ata_dev_reread_id - Reread the device identify device info
+ * @ap: port where the device is
+ * @dev: device to reread the identify device info
+ *
+ * LOCKING:
+ */
+
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ ata_sg_init_one(qc, dev->id, sizeof(dev->id));
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ if (dev->class == ATA_DEV_ATA) {
+ qc->tf.command = ATA_CMD_ID_ATA;
+ DPRINTK("do ATA identify\n");
+ } else {
+ qc->tf.command = ATA_CMD_ID_ATAPI;
+ DPRINTK("do ATAPI identify\n");
+ }
+
+ qc->tf.flags |= ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_PIO;
+ qc->nsect = 1;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ goto err_out;
+
+ wait_for_completion(&wait);
+
+ swap_buf_le16(dev->id, ATA_ID_WORDS);
+
+ ata_dump_id(dev);
+
+ DPRINTK("EXIT\n");
+
+ return;
+err_out:
+ ata_port_disable(ap);
+}
+
+/**
+ * ata_dev_init_params - Issue INIT DEV PARAMS command
+ * @ap: Port associated with device @dev
+ * @dev: Device to which command will be sent
+ *
+ * LOCKING:
+ */
+
+static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ int rc;
+ unsigned long flags;
+ u16 sectors = dev->id[6];
+ u16 heads = dev->id[3];
+
+ /* Number of sectors per track 1-255. Number of heads 1-16 */
+ if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
+ return;
+
+ /* set up init dev params taskfile */
+ DPRINTK("init dev params \n");
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ qc->tf.command = ATA_CMD_INIT_DEV_PARAMS;
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_NODATA;
+ qc->tf.nsect = sectors;
+ qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ ata_port_disable(ap);
+ else
+ wait_for_completion(&wait);
+
+ DPRINTK("EXIT\n");
+}
+
+/**
* ata_sg_clean - Unmap DMA memory associated with command
* @qc: Command containing DMA memory to be released
*
@@ -2284,19 +2555,12 @@
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
- struct scatterlist *sg;
-
qc->flags |= ATA_QCFLAG_SINGLE;
- memset(&qc->sgent, 0, sizeof(qc->sgent));
qc->sg = &qc->sgent;
qc->n_elem = 1;
qc->buf_virt = buf;
-
- sg = qc->sg;
- sg->page = virt_to_page(buf);
- sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg->length = buflen;
+ sg_init_one(qc->sg, buf, buflen);
}
/**
@@ -2399,7 +2663,7 @@
* None. (grabs host lock)
*/
-void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_poll_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
{
struct ata_port *ap = qc->ap;
unsigned long flags;
@@ -2407,38 +2671,38 @@
spin_lock_irqsave(&ap->host_set->lock, flags);
ap->flags &= ~ATA_FLAG_NOINTR;
ata_irq_on(ap);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, err_mask);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
/**
* ata_pio_poll -
- * @ap:
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
*
* RETURNS:
- *
+ * timeout value to use
*/
static unsigned long ata_pio_poll(struct ata_port *ap)
{
u8 status;
- unsigned int poll_state = PIO_ST_UNKNOWN;
- unsigned int reg_state = PIO_ST_UNKNOWN;
- const unsigned int tmout_state = PIO_ST_TMOUT;
+ unsigned int poll_state = HSM_ST_UNKNOWN;
+ unsigned int reg_state = HSM_ST_UNKNOWN;
+ const unsigned int tmout_state = HSM_ST_TMOUT;
- switch (ap->pio_task_state) {
- case PIO_ST:
- case PIO_ST_POLL:
- poll_state = PIO_ST_POLL;
- reg_state = PIO_ST;
+ switch (ap->hsm_task_state) {
+ case HSM_ST:
+ case HSM_ST_POLL:
+ poll_state = HSM_ST_POLL;
+ reg_state = HSM_ST;
break;
- case PIO_ST_LAST:
- case PIO_ST_LAST_POLL:
- poll_state = PIO_ST_LAST_POLL;
- reg_state = PIO_ST_LAST;
+ case HSM_ST_LAST:
+ case HSM_ST_LAST_POLL:
+ poll_state = HSM_ST_LAST_POLL;
+ reg_state = HSM_ST_LAST;
break;
default:
BUG();
@@ -2448,20 +2712,20 @@
status = ata_chk_status(ap);
if (status & ATA_BUSY) {
if (time_after(jiffies, ap->pio_task_timeout)) {
- ap->pio_task_state = tmout_state;
+ ap->hsm_task_state = tmout_state;
return 0;
}
- ap->pio_task_state = poll_state;
+ ap->hsm_task_state = poll_state;
return ATA_SHORT_PAUSE;
}
- ap->pio_task_state = reg_state;
+ ap->hsm_task_state = reg_state;
return 0;
}
/**
- * ata_pio_complete -
- * @ap:
+ * ata_pio_complete - check if drive is busy or idle
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
@@ -2480,14 +2744,14 @@
* we enter, BSY will be cleared in a chk-status or two. If not,
* the drive is probably seeking or something. Snooze for a couple
* msecs, then chk-status again. If still busy, fall back to
- * PIO_ST_POLL state.
+ * HSM_ST_POLL state.
*/
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
msleep(2);
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
- ap->pio_task_state = PIO_ST_LAST_POLL;
+ ap->hsm_task_state = HSM_ST_LAST_POLL;
ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
return 0;
}
@@ -2495,16 +2759,16 @@
drv_stat = ata_wait_idle(ap);
if (!ata_ok(drv_stat)) {
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
return 0;
}
qc = ata_qc_from_tag(ap, ap->active_tag);
assert(qc != NULL);
- ap->pio_task_state = PIO_ST_IDLE;
+ ap->hsm_task_state = HSM_ST_IDLE;
- ata_poll_qc_complete(qc, drv_stat);
+ ata_poll_qc_complete(qc, 0);
/* another command may start at this point */
@@ -2513,7 +2777,7 @@
/**
- * swap_buf_le16 -
+ * swap_buf_le16 - swap halves of 16-words in place
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
*
@@ -2522,6 +2786,7 @@
* vice-versa.
*
* LOCKING:
+ * Inherited from caller.
*/
void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
@@ -2544,7 +2809,6 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2590,7 +2854,6 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2630,7 +2893,6 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2662,7 +2924,7 @@
unsigned char *buf;
if (qc->cursect == (qc->nsect - 1))
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
page = sg[qc->cursg].page;
offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE;
@@ -2712,7 +2974,7 @@
unsigned int offset, count;
if (qc->curbytes + bytes >= qc->nbytes)
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
next_sg:
if (unlikely(qc->cursg >= qc->n_elem)) {
@@ -2734,7 +2996,7 @@
for (i = 0; i < words; i++)
ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
return;
}
@@ -2783,7 +3045,6 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void atapi_pio_bytes(struct ata_queued_cmd *qc)
@@ -2815,12 +3076,12 @@
err_out:
printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
ap->id, dev->devno);
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
}
/**
- * ata_pio_sector -
- * @ap:
+ * ata_pio_block - start PIO on a block
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
@@ -2832,19 +3093,19 @@
u8 status;
/*
- * This is purely hueristic. This is a fast path.
+ * This is purely heuristic. This is a fast path.
* Sometimes when we enter, BSY will be cleared in
* a chk-status or two. If not, the drive is probably seeking
* or something. Snooze for a couple msecs, then
* chk-status again. If still busy, fall back to
- * PIO_ST_POLL state.
+ * HSM_ST_POLL state.
*/
status = ata_busy_wait(ap, ATA_BUSY, 5);
if (status & ATA_BUSY) {
msleep(2);
status = ata_busy_wait(ap, ATA_BUSY, 10);
if (status & ATA_BUSY) {
- ap->pio_task_state = PIO_ST_POLL;
+ ap->hsm_task_state = HSM_ST_POLL;
ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
return;
}
@@ -2856,7 +3117,7 @@
if (is_atapi_taskfile(&qc->tf)) {
/* no more data to transfer or unsupported ATAPI command */
if ((status & ATA_DRQ) == 0) {
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
return;
}
@@ -2864,7 +3125,7 @@
} else {
/* handle BSY=0, DRQ=0 as error */
if ((status & ATA_DRQ) == 0) {
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
return;
}
@@ -2875,18 +3136,15 @@
static void ata_pio_error(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
- u8 drv_stat;
+
+ printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
qc = ata_qc_from_tag(ap, ap->active_tag);
assert(qc != NULL);
- drv_stat = ata_chk_status(ap);
- printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n",
- ap->id, drv_stat);
+ ap->hsm_task_state = HSM_ST_IDLE;
- ap->pio_task_state = PIO_ST_IDLE;
-
- ata_poll_qc_complete(qc, drv_stat | ATA_ERR);
+ ata_poll_qc_complete(qc, AC_ERR_ATA_BUS);
}
static void ata_pio_task(void *_data)
@@ -2899,25 +3157,25 @@
timeout = 0;
qc_completed = 0;
- switch (ap->pio_task_state) {
- case PIO_ST_IDLE:
+ switch (ap->hsm_task_state) {
+ case HSM_ST_IDLE:
return;
- case PIO_ST:
+ case HSM_ST:
ata_pio_block(ap);
break;
- case PIO_ST_LAST:
+ case HSM_ST_LAST:
qc_completed = ata_pio_complete(ap);
break;
- case PIO_ST_POLL:
- case PIO_ST_LAST_POLL:
+ case HSM_ST_POLL:
+ case HSM_ST_LAST_POLL:
timeout = ata_pio_poll(ap);
break;
- case PIO_ST_TMOUT:
- case PIO_ST_ERR:
+ case HSM_ST_TMOUT:
+ case HSM_ST_ERR:
ata_pio_error(ap);
return;
}
@@ -2928,52 +3186,6 @@
goto fsm_start;
}
-static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd)
-{
- DECLARE_COMPLETION(wait);
- struct ata_queued_cmd *qc;
- unsigned long flags;
- int rc;
-
- DPRINTK("ATAPI request sense\n");
-
- qc = ata_qc_new_init(ap, dev);
- BUG_ON(qc == NULL);
-
- /* FIXME: is this needed? */
- memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
-
- ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
- qc->dma_dir = DMA_FROM_DEVICE;
-
- memset(&qc->cdb, 0, ap->cdb_len);
- qc->cdb[0] = REQUEST_SENSE;
- qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
-
- qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- qc->tf.command = ATA_CMD_PACKET;
-
- qc->tf.protocol = ATA_PROT_ATAPI;
- qc->tf.lbam = (8 * 1024) & 0xff;
- qc->tf.lbah = (8 * 1024) >> 8;
- qc->nbytes = SCSI_SENSE_BUFFERSIZE;
-
- qc->waiting = &wait;
- qc->complete_fn = ata_qc_complete_noop;
-
- spin_lock_irqsave(&ap->host_set->lock, flags);
- rc = ata_qc_issue(qc);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- if (rc)
- ata_port_disable(ap);
- else
- wait_for_completion(&wait);
-
- DPRINTK("EXIT\n");
-}
-
/**
* ata_qc_timeout - Handle timeout of queued command
* @qc: Command that timed out
@@ -3055,7 +3267,7 @@
ap->id, qc->tf.command, drv_stat, host_stat);
/* complete taskfile transaction */
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, ac_err_mask(drv_stat));
break;
}
@@ -3091,14 +3303,14 @@
DPRINTK("ENTER\n");
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!qc) {
+ if (qc)
+ ata_qc_timeout(qc);
+ else {
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
ap->id);
goto out;
}
- ata_qc_timeout(qc);
-
out:
DPRINTK("EXIT\n");
}
@@ -3155,15 +3367,12 @@
qc->nbytes = qc->curbytes = 0;
ata_tf_init(ap, &qc->tf, dev->devno);
-
- if (dev->flags & ATA_DFLAG_LBA48)
- qc->tf.flags |= ATA_TFLAG_LBA48;
}
return qc;
}
-static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
+int ata_qc_complete_noop(struct ata_queued_cmd *qc, unsigned int err_mask)
{
return 0;
}
@@ -3201,7 +3410,6 @@
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
@@ -3221,10 +3429,9 @@
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
*/
-void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
{
int rc;
@@ -3241,7 +3448,7 @@
qc->flags &= ~ATA_QCFLAG_ACTIVE;
/* call completion callback */
- rc = qc->complete_fn(qc, drv_stat);
+ rc = qc->complete_fn(qc, err_mask);
/* if callback indicates not to complete command (non-zero),
* return immediately
@@ -3360,7 +3567,7 @@
case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
ata_qc_set_polling(qc);
ata_tf_to_host_nolock(ap, &qc->tf);
- ap->pio_task_state = PIO_ST;
+ ap->hsm_task_state = HSM_ST;
queue_work(ata_wq, &ap->pio_task);
break;
@@ -3586,7 +3793,7 @@
void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
host_stat = readb(mmio + ATA_DMA_STATUS);
} else
- host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
return host_stat;
}
@@ -3679,7 +3886,7 @@
ap->ops->irq_clear(ap);
/* complete taskfile transaction */
- ata_qc_complete(qc, status);
+ ata_qc_complete(qc, ac_err_mask(status));
break;
default:
@@ -3715,7 +3922,6 @@
*
* RETURNS:
* IRQ_NONE or IRQ_HANDLED.
- *
*/
irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
@@ -3775,7 +3981,7 @@
/* sleep-wait for BSY to clear */
DPRINTK("busy wait\n");
if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB))
- goto err_out;
+ goto err_out_status;
/* make sure DRQ is set */
status = ata_chk_status(ap);
@@ -3806,14 +4012,16 @@
ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
/* PIO commands are handled by polling */
- ap->pio_task_state = PIO_ST;
+ ap->hsm_task_state = HSM_ST;
queue_work(ata_wq, &ap->pio_task);
}
return;
+err_out_status:
+ status = ata_chk_status(ap);
err_out:
- ata_poll_qc_complete(qc, ATA_ERR);
+ ata_poll_qc_complete(qc, __ac_err_mask(status));
}
@@ -3827,6 +4035,7 @@
* May be used as the port_start() entry in ata_port_operations.
*
* LOCKING:
+ * Inherited from caller.
*/
int ata_port_start (struct ata_port *ap)
@@ -3852,6 +4061,7 @@
* May be used as the port_stop() entry in ata_port_operations.
*
* LOCKING:
+ * Inherited from caller.
*/
void ata_port_stop (struct ata_port *ap)
@@ -3874,6 +4084,7 @@
* @do_unregister: 1 if we fully unregister, 0 to just stop the port
*
* LOCKING:
+ * Inherited from caller.
*/
static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
@@ -3901,12 +4112,11 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
struct ata_host_set *host_set,
- struct ata_probe_ent *ent, unsigned int port_no)
+ const struct ata_probe_ent *ent, unsigned int port_no)
{
unsigned int i;
@@ -3962,10 +4172,9 @@
*
* RETURNS:
* New ata_port on success, for NULL on error.
- *
*/
-static struct ata_port * ata_host_add(struct ata_probe_ent *ent,
+static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
struct ata_host_set *host_set,
unsigned int port_no)
{
@@ -4010,10 +4219,9 @@
*
* RETURNS:
* Number of ports registered. Zero on error (no ports registered).
- *
*/
-int ata_device_add(struct ata_probe_ent *ent)
+int ata_device_add(const struct ata_probe_ent *ent)
{
unsigned int count = 0, i;
struct device *dev = ent->dev;
@@ -4021,11 +4229,10 @@
DPRINTK("ENTER\n");
/* alloc a container for our list of ATA ports (buses) */
- host_set = kmalloc(sizeof(struct ata_host_set) +
+ host_set = kzalloc(sizeof(struct ata_host_set) +
(ent->n_ports * sizeof(void *)), GFP_KERNEL);
if (!host_set)
return 0;
- memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)));
spin_lock_init(&host_set->lock);
host_set->dev = dev;
@@ -4065,10 +4272,8 @@
count++;
}
- if (!count) {
- kfree(host_set);
- return 0;
- }
+ if (!count)
+ goto err_free_ret;
/* obtain irq, that is shared between channels */
if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
@@ -4113,7 +4318,7 @@
for (i = 0; i < count; i++) {
struct ata_port *ap = host_set->ports[i];
- scsi_scan_host(ap->host);
+ ata_scsi_scan_host(ap);
}
dev_set_drvdata(dev, host_set);
@@ -4126,6 +4331,7 @@
ata_host_remove(host_set->ports[i], 1);
scsi_host_put(host_set->ports[i]->host);
}
+err_free_ret:
kfree(host_set);
VPRINTK("EXIT, returning 0\n");
return 0;
@@ -4142,7 +4348,6 @@
* Inherited from calling layer (may sleep).
*/
-
void ata_host_set_remove(struct ata_host_set *host_set)
{
struct ata_port *ap;
@@ -4232,19 +4437,17 @@
}
static struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
+ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
{
struct ata_probe_ent *probe_ent;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
return NULL;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
-
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->dev = dev;
@@ -4273,85 +4476,86 @@
* ata_pci_init_native_mode - Initialize native-mode driver
* @pdev: pci device to be initialized
* @port: array[2] of pointers to port info structures.
+ * @ports: bitmap of ports present
*
* Utility function which allocates and initializes an
* ata_probe_ent structure for a standard dual-port
* PIO-based IDE controller. The returned ata_probe_ent
* structure can be passed to ata_device_add(). The returned
* ata_probe_ent structure should then be freed with kfree().
+ *
+ * The caller need only pass the address of the primary port, the
+ * secondary will be deduced automatically. If the device has non
+ * standard secondary port mappings this function can be called twice,
+ * once for each interface.
*/
struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
{
struct ata_probe_ent *probe_ent =
ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ int p = 0;
+
if (!probe_ent)
return NULL;
- probe_ent->n_ports = 2;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
- probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0);
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr =
- pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
- probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
+ if (ports & ATA_PORT_PRIMARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
+ probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
- probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2);
- probe_ent->port[1].altstatus_addr =
- probe_ent->port[1].ctl_addr =
- pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
- probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+ if (ports & ATA_PORT_SECONDARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
+ probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
- ata_std_ports(&probe_ent->port[0]);
- ata_std_ports(&probe_ent->port[1]);
-
+ probe_ent->n_ports = p;
return probe_ent;
}
-static struct ata_probe_ent *
-ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
- struct ata_probe_ent **ppe2)
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num)
{
- struct ata_probe_ent *probe_ent, *probe_ent2;
+ struct ata_probe_ent *probe_ent;
- probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
if (!probe_ent)
return NULL;
- probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]);
- if (!probe_ent2) {
- kfree(probe_ent);
- return NULL;
- }
- probe_ent->n_ports = 1;
- probe_ent->irq = 14;
-
- probe_ent->hard_port_no = 0;
probe_ent->legacy_mode = 1;
+ probe_ent->n_ports = 1;
+ probe_ent->hard_port_no = port_num;
- probe_ent2->n_ports = 1;
- probe_ent2->irq = 15;
-
- probe_ent2->hard_port_no = 1;
- probe_ent2->legacy_mode = 1;
-
- probe_ent->port[0].cmd_addr = 0x1f0;
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr = 0x3f6;
- probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
-
- probe_ent2->port[0].cmd_addr = 0x170;
- probe_ent2->port[0].altstatus_addr =
- probe_ent2->port[0].ctl_addr = 0x376;
- probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
-
+ switch(port_num)
+ {
+ case 0:
+ probe_ent->irq = 14;
+ probe_ent->port[0].cmd_addr = 0x1f0;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x3f6;
+ break;
+ case 1:
+ probe_ent->irq = 15;
+ probe_ent->port[0].cmd_addr = 0x170;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x376;
+ break;
+ }
+ probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num;
ata_std_ports(&probe_ent->port[0]);
- ata_std_ports(&probe_ent2->port[0]);
-
- *ppe2 = probe_ent2;
return probe_ent;
}
@@ -4374,13 +4578,12 @@
*
* RETURNS:
* Zero on success, negative on errno-based value on error.
- *
*/
int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports)
{
- struct ata_probe_ent *probe_ent, *probe_ent2 = NULL;
+ struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL;
struct ata_port_info *port[2];
u8 tmp8, mask;
unsigned int legacy_mode = 0;
@@ -4397,7 +4600,7 @@
if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
&& (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
- /* TODO: support transitioning to native mode? */
+ /* TODO: What if one channel is in native mode ... */
pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
mask = (1 << 2) | (1 << 0);
if ((tmp8 & mask) != mask)
@@ -4405,11 +4608,20 @@
}
/* FIXME... */
- if ((!legacy_mode) && (n_ports > 1)) {
- printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n");
- return -EINVAL;
+ if ((!legacy_mode) && (n_ports > 2)) {
+ printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n");
+ n_ports = 2;
+ /* For now */
}
+ /* FIXME: Really for ATA it isn't safe because the device may be
+ multi-purpose and we want to leave it alone if it was already
+ enabled. Secondly for shared use as Arjan says we want refcounting
+
+ Checking dev->is_enabled is insufficient as this is not set at
+ boot for the primary video which is BIOS enabled
+ */
+
rc = pci_enable_device(pdev);
if (rc)
return rc;
@@ -4420,6 +4632,7 @@
goto err_out;
}
+ /* FIXME: Should use platform specific mappers for legacy port ranges */
if (legacy_mode) {
if (!request_region(0x1f0, 8, "libata")) {
struct resource *conflict, res;
@@ -4464,10 +4677,17 @@
goto err_out_regions;
if (legacy_mode) {
- probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2);
- } else
- probe_ent = ata_pci_init_native_mode(pdev, port);
- if (!probe_ent) {
+ if (legacy_mode & (1 << 0))
+ probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
+ if (legacy_mode & (1 << 1))
+ probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
+ } else {
+ if (n_ports == 2)
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ else
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+ }
+ if (!probe_ent && !probe_ent2) {
rc = -ENOMEM;
goto err_out_regions;
}
@@ -4505,7 +4725,7 @@
* @pdev: PCI device that was removed
*
* PCI layer indicates to libata via this hook that
- * hot-unplug or module unload event has occured.
+ * hot-unplug or module unload event has occurred.
* Handle this by unregistering all objects associated
* with this PCI device. Free those objects. Then finally
* release PCI resources and disable device.
@@ -4526,7 +4746,7 @@
}
/* move to PCI subsystem */
-int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
+int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
{
unsigned long tmp = 0;
@@ -4579,6 +4799,27 @@
module_init(ata_init);
module_exit(ata_exit);
+static unsigned long ratelimit_time;
+static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED;
+
+int ata_ratelimit(void)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ata_ratelimit_lock, flags);
+
+ if (time_after(jiffies, ratelimit_time)) {
+ rc = 1;
+ ratelimit_time = jiffies + (HZ/5);
+ } else
+ rc = 0;
+
+ spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
+
+ return rc;
+}
+
/*
* libata is essentially a library of internal helper functions for
* low-level ATA host controller drivers. As such, the API/ABI is
@@ -4603,7 +4844,6 @@
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_check_status);
EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
@@ -4620,6 +4860,7 @@
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_port_disable);
+EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_error);
@@ -4631,6 +4872,9 @@
EXPORT_SYMBOL_GPL(ata_dev_config);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_timing_compute);
+EXPORT_SYMBOL_GPL(ata_timing_merge);
+
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
EXPORT_SYMBOL_GPL(ata_pci_host_stop);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 104fd9a..1e3792f 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -40,14 +40,64 @@
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include "libata.h"
-typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd);
-static struct ata_device *
-ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev);
+#define SECTOR_SIZE 512
+typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
+static struct ata_device *
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
+
+#define RW_RECOVERY_MPAGE 0x1
+#define RW_RECOVERY_MPAGE_LEN 12
+#define CACHE_MPAGE 0x8
+#define CACHE_MPAGE_LEN 20
+#define CONTROL_MPAGE 0xa
+#define CONTROL_MPAGE_LEN 12
+#define ALL_MPAGES 0x3f
+#define ALL_SUB_MPAGES 0xff
+
+
+static const u8 def_rw_recovery_mpage[] = {
+ RW_RECOVERY_MPAGE,
+ RW_RECOVERY_MPAGE_LEN - 2,
+ (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */
+ (1 << 6), /* ARRE (auto read reallocation) */
+ 0, /* read retry count */
+ 0, 0, 0, 0,
+ 0, /* write retry count */
+ 0, 0, 0
+};
+
+static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = {
+ CACHE_MPAGE,
+ CACHE_MPAGE_LEN - 2,
+ 0, /* contains WCE, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, /* contains DRA, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0
+};
+
+static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
+ CONTROL_MPAGE,
+ CONTROL_MPAGE_LEN - 2,
+ 2, /* DSENSE=0, GLTSD=1 */
+ 0, /* [QAM+QERR may be 1, see 05-359r1] */
+ 0, 0, 0, 0, 0xff, 0xff,
+ 0, 30 /* extended self test time, see 05-359r1 */
+};
+
+
+static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *))
+{
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ done(cmd);
+}
/**
* ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
@@ -78,6 +128,150 @@
return 0;
}
+/**
+ * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+
+int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[4], *argbuf = NULL;
+ int argsize = 0;
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq)
+ return -EINTR;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+
+ if (args[3]) {
+ argsize = SECTOR_SIZE * args[3];
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL) {
+ rc = -ENOMEM;
+ goto error;
+ }
+
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
+ block count in sector count field */
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+ } else {
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ sreq->sr_data_direction = DMA_NONE;
+ }
+
+ scsi_cmd[0] = ATA_16;
+
+ scsi_cmd[4] = args[2];
+ if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
+ scsi_cmd[6] = args[3];
+ scsi_cmd[8] = args[1];
+ scsi_cmd[10] = 0x4f;
+ scsi_cmd[12] = 0xc2;
+ } else {
+ scsi_cmd[6] = args[1];
+ }
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+ if ((argbuf)
+ && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize))
+ rc = -EFAULT;
+error:
+ scsi_release_request(sreq);
+
+ if (argbuf)
+ kfree(argbuf);
+
+ return rc;
+}
+
+/**
+ * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[7];
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[4] = args[1];
+ scsi_cmd[6] = args[2];
+ scsi_cmd[8] = args[3];
+ scsi_cmd[10] = args[4];
+ scsi_cmd[12] = args[5];
+ scsi_cmd[14] = args[0];
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq) {
+ rc = -EINTR;
+ goto error;
+ }
+
+ sreq->sr_data_direction = DMA_NONE;
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+error:
+ scsi_release_request(sreq);
+ return rc;
+}
+
int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
{
struct ata_port *ap;
@@ -107,6 +301,16 @@
return -EINVAL;
return 0;
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_cmd_ioctl(scsidev, arg);
+
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_task_ioctl(scsidev, arg);
+
default:
rc = -ENOTTY;
break;
@@ -165,24 +369,70 @@
}
/**
- * ata_to_sense_error - convert ATA error to SCSI error
- * @qc: Command that we are erroring out
- * @drv_stat: value contained in ATA status register
+ * ata_dump_status - user friendly display of error info
+ * @id: id of the port in question
+ * @tf: ptr to filled out taskfile
*
- * Converts an ATA error into a SCSI error. While we are at it
- * we decode and dump the ATA error for the user so that they
- * have some idea what really happened at the non make-believe
- * layer.
+ * Decode and dump the ATA error/status registers for the user so
+ * that they have some idea what really happened at the non
+ * make-believe layer.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_dump_status(unsigned id, struct ata_taskfile *tf)
+{
+ u8 stat = tf->command, err = tf->feature;
+
+ printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
+ if (stat & ATA_BUSY) {
+ printk("Busy }\n"); /* Data is not valid in this case */
+ } else {
+ if (stat & 0x40) printk("DriveReady ");
+ if (stat & 0x20) printk("DeviceFault ");
+ if (stat & 0x10) printk("SeekComplete ");
+ if (stat & 0x08) printk("DataRequest ");
+ if (stat & 0x04) printk("CorrectedError ");
+ if (stat & 0x02) printk("Index ");
+ if (stat & 0x01) printk("Error ");
+ printk("}\n");
+
+ if (err) {
+ printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
+ if (err & 0x04) printk("DriveStatusError ");
+ if (err & 0x80) {
+ if (err & 0x04) printk("BadCRC ");
+ else printk("Sector ");
+ }
+ if (err & 0x40) printk("UncorrectableError ");
+ if (err & 0x10) printk("SectorIdNotFound ");
+ if (err & 0x02) printk("TrackZeroNotFound ");
+ if (err & 0x01) printk("AddrMarkNotFound ");
+ printk("}\n");
+ }
+ }
+}
+
+/**
+ * ata_to_sense_error - convert ATA error to SCSI error
+ * @drv_stat: value contained in ATA status register
+ * @drv_err: value contained in ATA error register
+ * @sk: the sense key we'll fill out
+ * @asc: the additional sense code we'll fill out
+ * @ascq: the additional sense code qualifier we'll fill out
+ *
+ * Converts an ATA error into a SCSI error. Fill out pointers to
+ * SK, ASC, and ASCQ bytes for later use in fixed or descriptor
+ * format sense blocks.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-
-void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
+ u8 *ascq)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
- u8 err = 0;
- unsigned char *sb = cmd->sense_buffer;
+ int i;
+
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
@@ -223,105 +473,192 @@
{0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
- int i = 0;
-
- cmd->result = SAM_STAT_CHECK_CONDITION;
/*
* Is this an error we can process/parse
*/
-
- if(drv_stat & ATA_ERR)
- /* Read the err bits */
- err = ata_chk_err(qc->ap);
-
- /* Display the ATA level error info */
-
- printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
- if(drv_stat & 0x80)
- {
- printk("Busy ");
- err = 0; /* Data is not valid in this case */
+ if (drv_stat & ATA_BUSY) {
+ drv_err = 0; /* Ignore the err bits, they're invalid */
}
- else {
- if(drv_stat & 0x40) printk("DriveReady ");
- if(drv_stat & 0x20) printk("DeviceFault ");
- if(drv_stat & 0x10) printk("SeekComplete ");
- if(drv_stat & 0x08) printk("DataRequest ");
- if(drv_stat & 0x04) printk("CorrectedError ");
- if(drv_stat & 0x02) printk("Index ");
- if(drv_stat & 0x01) printk("Error ");
- }
- printk("}\n");
- if(err)
- {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
- if(err & 0x04) printk("DriveStatusError ");
- if(err & 0x80)
- {
- if(err & 0x04)
- printk("BadCRC ");
- else
- printk("Sector ");
+ if (drv_err) {
+ /* Look for drv_err */
+ for (i = 0; sense_table[i][0] != 0xFF; i++) {
+ /* Look for best matches first */
+ if ((sense_table[i][0] & drv_err) ==
+ sense_table[i][0]) {
+ *sk = sense_table[i][1];
+ *asc = sense_table[i][2];
+ *ascq = sense_table[i][3];
+ goto translate_done;
+ }
}
- if(err & 0x40) printk("UncorrectableError ");
- if(err & 0x10) printk("SectorIdNotFound ");
- if(err & 0x02) printk("TrackZeroNotFound ");
- if(err & 0x01) printk("AddrMarkNotFound ");
- printk("}\n");
-
- /* Should we dump sector info here too ?? */
+ /* No immediate match */
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "error 0x%02x\n", id, drv_err);
}
-
- /* Look for err */
- while(sense_table[i][0] != 0xFF)
- {
- /* Look for best matches first */
- if((sense_table[i][0] & err) == sense_table[i][0])
- {
- sb[0] = 0x70;
- sb[2] = sense_table[i][1];
- sb[7] = 0x0a;
- sb[12] = sense_table[i][2];
- sb[13] = sense_table[i][3];
- return;
- }
- i++;
- }
- /* No immediate match */
- if(err)
- printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
-
- i = 0;
/* Fall back to interpreting status bits */
- while(stat_table[i][0] != 0xFF)
- {
- if(stat_table[i][0] & drv_stat)
- {
- sb[0] = 0x70;
- sb[2] = stat_table[i][1];
- sb[7] = 0x0a;
- sb[12] = stat_table[i][2];
- sb[13] = stat_table[i][3];
- return;
+ for (i = 0; stat_table[i][0] != 0xFF; i++) {
+ if (stat_table[i][0] & drv_stat) {
+ *sk = stat_table[i][1];
+ *asc = stat_table[i][2];
+ *ascq = stat_table[i][3];
+ goto translate_done;
}
- i++;
}
- /* No error ?? */
- printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
- /* additional-sense-code[-qualifier] */
+ /* No error? Undecoded? */
+ printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
+ id, drv_stat);
+
+ /* For our last chance pick, use medium read error because
+ * it's much more common than an ATA drive telling you a write
+ * has failed.
+ */
+ *sk = MEDIUM_ERROR;
+ *asc = 0x11; /* "unrecovered read error" */
+ *ascq = 0x04; /* "auto-reallocation failed" */
+
+ translate_done:
+ printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
+ "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
+ *sk, *asc, *ascq);
+ return;
+}
+
+/*
+ * ata_gen_ata_desc_sense - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * This function is specific to the ATA descriptor format sense
+ * block specified for the ATA pass through commands. Regardless
+ * of whether the command errored or not, return a sense
+ * block. Copy all controller registers into the sense
+ * block. Clear sense key, ASC & ASCQ if there is no error.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3]);
+ sb[1] &= 0x0f;
+ }
+
+ /*
+ * Sense data is current and format is descriptor.
+ */
+ sb[0] = 0x72;
+
+ desc[0] = 0x09;
+
+ /*
+ * Set length of additional sense data.
+ * Since we only populate descriptor 0, the total
+ * length is the same (fixed) length as descriptor 0.
+ */
+ desc[1] = sb[7] = 14;
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00;
+ desc[3] = tf->feature; /* == error reg */
+ desc[5] = tf->nsect;
+ desc[7] = tf->lbal;
+ desc[9] = tf->lbam;
+ desc[11] = tf->lbah;
+ desc[12] = tf->device;
+ desc[13] = tf->command; /* == status reg */
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01;
+ desc[4] = tf->hob_nsect;
+ desc[6] = tf->hob_lbal;
+ desc[8] = tf->hob_lbam;
+ desc[10] = tf->hob_lbah;
+ }
+}
+
+/**
+ * ata_gen_fixed_sense - generate a SCSI fixed sense block
+ * @qc: Command that we are erroring out
+ *
+ * Leverage ata_to_sense_error() to give us the codes. Fit our
+ * LBA in here if there's room.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[2], &sb[12], &sb[13]);
+ sb[2] &= 0x0f;
+ }
sb[0] = 0x70;
- sb[2] = MEDIUM_ERROR;
- sb[7] = 0x0A;
- if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- sb[12] = 0x11; /* "unrecovered read error" */
- sb[13] = 0x04;
- } else {
- sb[12] = 0x0C; /* "write error - */
- sb[13] = 0x02; /* auto-reallocation failed" */
+ sb[7] = 0x0a;
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ /* TODO: find solution for LBA48 descriptors */
+ }
+
+ else if (tf->flags & ATA_TFLAG_LBA) {
+ /* A small (28b) LBA will fit in the 32b info field */
+ sb[0] |= 0x80; /* set valid bit */
+ sb[3] = tf->device & 0x0f;
+ sb[4] = tf->lbah;
+ sb[5] = tf->lbam;
+ sb[6] = tf->lbal;
+ }
+
+ else {
+ /* TODO: C/H/S */
}
}
@@ -420,7 +757,7 @@
*/
static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
- u8 *scsicmd)
+ const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
@@ -430,15 +767,26 @@
; /* ignore IMMED bit, violates sat-r05 */
}
if (scsicmd[4] & 0x2)
- return 1; /* LOEJ bit set not supported */
+ goto invalid_fld; /* LOEJ bit set not supported */
if (((scsicmd[4] >> 4) & 0xf) != 0)
- return 1; /* power conditions not supported */
+ goto invalid_fld; /* power conditions not supported */
if (scsicmd[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
- tf->lbah = 0x0;
- tf->lbam = 0x0;
- tf->lbal = 0x0;
- tf->device |= ATA_LBA;
+
+ if (qc->dev->flags & ATA_DFLAG_LBA) {
+ qc->tf.flags |= ATA_TFLAG_LBA;
+
+ tf->lbah = 0x0;
+ tf->lbam = 0x0;
+ tf->lbal = 0x0;
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ tf->lbal = 0x1; /* sect */
+ tf->lbam = 0x0; /* cyl low */
+ tf->lbah = 0x0; /* cyl high */
+ }
+
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
} else {
tf->nsect = 0; /* time period value (0 implies now) */
@@ -453,6 +801,11 @@
*/
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
}
@@ -471,14 +824,14 @@
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
tf->flags |= ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if ((tf->flags & ATA_TFLAG_LBA48) &&
+ if ((qc->dev->flags & ATA_DFLAG_LBA48) &&
(ata_id_has_flush_ext(qc->dev->id)))
tf->command = ATA_CMD_FLUSH_EXT;
else
@@ -488,6 +841,99 @@
}
/**
+ * scsi_6_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 6-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("six-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 8;
+ lba |= ((u64)scsicmd[3]);
+
+ len |= ((u32)scsicmd[4]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_10_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 10-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("ten-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 24;
+ lba |= ((u64)scsicmd[3]) << 16;
+ lba |= ((u64)scsicmd[4]) << 8;
+ lba |= ((u64)scsicmd[5]);
+
+ len |= ((u32)scsicmd[7]) << 8;
+ len |= ((u32)scsicmd[8]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_16_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 16-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("sixteen-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 56;
+ lba |= ((u64)scsicmd[3]) << 48;
+ lba |= ((u64)scsicmd[4]) << 40;
+ lba |= ((u64)scsicmd[5]) << 32;
+ lba |= ((u64)scsicmd[6]) << 24;
+ lba |= ((u64)scsicmd[7]) << 16;
+ lba |= ((u64)scsicmd[8]) << 8;
+ lba |= ((u64)scsicmd[9]);
+
+ len |= ((u32)scsicmd[10]) << 24;
+ len |= ((u32)scsicmd[11]) << 16;
+ len |= ((u32)scsicmd[12]) << 8;
+ len |= ((u32)scsicmd[13]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
* ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
* @qc: Storage for translated ATA taskfile
* @scsicmd: SCSI command to translate
@@ -501,82 +947,110 @@
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
+ struct ata_device *dev = qc->dev;
u64 dev_sectors = qc->dev->n_sectors;
- u64 sect = 0;
- u32 n_sect = 0;
+ u64 block;
+ u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- tf->device |= ATA_LBA;
- if (scsicmd[0] == VERIFY) {
- sect |= ((u64)scsicmd[2]) << 24;
- sect |= ((u64)scsicmd[3]) << 16;
- sect |= ((u64)scsicmd[4]) << 8;
- sect |= ((u64)scsicmd[5]);
-
- n_sect |= ((u32)scsicmd[7]) << 8;
- n_sect |= ((u32)scsicmd[8]);
- }
-
- else if (scsicmd[0] == VERIFY_16) {
- sect |= ((u64)scsicmd[2]) << 56;
- sect |= ((u64)scsicmd[3]) << 48;
- sect |= ((u64)scsicmd[4]) << 40;
- sect |= ((u64)scsicmd[5]) << 32;
- sect |= ((u64)scsicmd[6]) << 24;
- sect |= ((u64)scsicmd[7]) << 16;
- sect |= ((u64)scsicmd[8]) << 8;
- sect |= ((u64)scsicmd[9]);
-
- n_sect |= ((u32)scsicmd[10]) << 24;
- n_sect |= ((u32)scsicmd[11]) << 16;
- n_sect |= ((u32)scsicmd[12]) << 8;
- n_sect |= ((u32)scsicmd[13]);
- }
-
+ if (scsicmd[0] == VERIFY)
+ scsi_10_lba_len(scsicmd, &block, &n_block);
+ else if (scsicmd[0] == VERIFY_16)
+ scsi_16_lba_len(scsicmd, &block, &n_block);
else
- return 1;
+ goto invalid_fld;
- if (!n_sect)
- return 1;
- if (sect >= dev_sectors)
- return 1;
- if ((sect + n_sect) > dev_sectors)
- return 1;
- if (lba48) {
- if (n_sect > (64 * 1024))
- return 1;
+ if (!n_block)
+ goto nothing_to_do;
+ if (block >= dev_sectors)
+ goto out_of_range;
+ if ((block + n_block) > dev_sectors)
+ goto out_of_range;
+
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ if (dev->flags & ATA_DFLAG_LBA48) {
+ if (n_block > (64 * 1024))
+ goto invalid_fld;
+
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
+ tf->command = ATA_CMD_VERIFY_EXT;
+
+ tf->hob_nsect = (n_block >> 8) & 0xff;
+
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ } else {
+ if (n_block > 256)
+ goto invalid_fld;
+
+ /* use LBA28 */
+ tf->command = ATA_CMD_VERIFY;
+
+ tf->device |= (block >> 24) & 0xf;
+ }
+
+ tf->nsect = n_block & 0xff;
+
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
+
+ tf->device |= ATA_LBA;
} else {
- if (n_sect > 256)
- return 1;
- }
+ /* CHS */
+ u32 sect, head, cyl, track;
- if (lba48) {
- tf->command = ATA_CMD_VERIFY_EXT;
+ if (n_block > 256)
+ goto invalid_fld;
- tf->hob_nsect = (n_sect >> 8) & 0xff;
+ /* Convert LBA to CHS */
+ track = (u32)block / dev->sectors;
+ cyl = track / dev->heads;
+ head = track % dev->heads;
+ sect = (u32)block % dev->sectors + 1;
- tf->hob_lbah = (sect >> 40) & 0xff;
- tf->hob_lbam = (sect >> 32) & 0xff;
- tf->hob_lbal = (sect >> 24) & 0xff;
- } else {
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
+ Head: 0-15
+ Sector: 1-255*/
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ goto out_of_range;
+
tf->command = ATA_CMD_VERIFY;
-
- tf->device |= (sect >> 24) & 0xf;
+ tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device |= head;
}
- tf->nsect = n_sect & 0xff;
-
- tf->lbah = (sect >> 16) & 0xff;
- tf->lbam = (sect >> 8) & 0xff;
- tf->lbal = sect & 0xff;
-
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
+ return 1;
}
/**
@@ -599,117 +1073,175 @@
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
+ struct ata_device *dev = qc->dev;
+ u64 block;
+ u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf->protocol = qc->dev->xfer_protocol;
- tf->device |= ATA_LBA;
- if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 ||
- scsicmd[0] == READ_16) {
- tf->command = qc->dev->read_cmd;
- } else {
- tf->command = qc->dev->write_cmd;
+ if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
+ scsicmd[0] == WRITE_16)
tf->flags |= ATA_TFLAG_WRITE;
+
+ /* Calculate the SCSI LBA and transfer length. */
+ switch (scsicmd[0]) {
+ case READ_10:
+ case WRITE_10:
+ scsi_10_lba_len(scsicmd, &block, &n_block);
+ break;
+ case READ_6:
+ case WRITE_6:
+ scsi_6_lba_len(scsicmd, &block, &n_block);
+
+ /* for 6-byte r/w commands, transfer length 0
+ * means 256 blocks of data, not 0 block.
+ */
+ if (!n_block)
+ n_block = 256;
+ break;
+ case READ_16:
+ case WRITE_16:
+ scsi_16_lba_len(scsicmd, &block, &n_block);
+ break;
+ default:
+ DPRINTK("no-byte command\n");
+ goto invalid_fld;
}
- if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) {
- if (lba48) {
- tf->hob_nsect = scsicmd[7];
- tf->hob_lbal = scsicmd[2];
+ /* Check and compose ATA command */
+ if (!n_block)
+ /* For 10-byte and 16-byte SCSI R/W commands, transfer
+ * length 0 means transfer 0 block of data.
+ * However, for ATA R/W commands, sector count 0 means
+ * 256 or 65536 sectors, not 0 sectors as in SCSI.
+ */
+ goto nothing_to_do;
- qc->nsect = ((unsigned int)scsicmd[7] << 8) |
- scsicmd[8];
- } else {
- /* if we don't support LBA48 addressing, the request
- * -may- be too large. */
- if ((scsicmd[2] & 0xf0) || scsicmd[7])
- return 1;
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
- /* stores LBA27:24 in lower 4 bits of device reg */
- tf->device |= scsicmd[2];
+ if (dev->flags & ATA_DFLAG_LBA48) {
+ /* The request -may- be too large for LBA48. */
+ if ((block >> 48) || (n_block > 65536))
+ goto out_of_range;
- qc->nsect = scsicmd[8];
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
+
+ tf->hob_nsect = (n_block >> 8) & 0xff;
+
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ } else {
+ /* use LBA28 */
+
+ /* The request -may- be too large for LBA28. */
+ if ((block >> 28) || (n_block > 256))
+ goto out_of_range;
+
+ tf->device |= (block >> 24) & 0xf;
}
- tf->nsect = scsicmd[8];
- tf->lbal = scsicmd[5];
- tf->lbam = scsicmd[4];
- tf->lbah = scsicmd[3];
+ ata_rwcmd_protocol(qc);
- VPRINTK("ten-byte command\n");
- if (qc->nsect == 0) /* we don't support length==0 cmds */
- return 1;
- return 0;
+ qc->nsect = n_block;
+ tf->nsect = n_block & 0xff;
+
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
+
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ u32 sect, head, cyl, track;
+
+ /* The request -may- be too large for CHS addressing. */
+ if ((block >> 28) || (n_block > 256))
+ goto out_of_range;
+
+ ata_rwcmd_protocol(qc);
+
+ /* Convert LBA to CHS */
+ track = (u32)block / dev->sectors;
+ cyl = track / dev->heads;
+ head = track % dev->heads;
+ sect = (u32)block % dev->sectors + 1;
+
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
+ Head: 0-15
+ Sector: 1-255*/
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ goto out_of_range;
+
+ qc->nsect = n_block;
+ tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device |= head;
}
- if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
- qc->nsect = tf->nsect = scsicmd[4];
- if (!qc->nsect) {
- qc->nsect = 256;
- if (lba48)
- tf->hob_nsect = 1;
- }
+ return 0;
- tf->lbal = scsicmd[3];
- tf->lbam = scsicmd[2];
- tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
- VPRINTK("six-byte command\n");
- return 0;
- }
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
- if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) {
- /* rule out impossible LBAs and sector counts */
- if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11])
- return 1;
-
- if (lba48) {
- tf->hob_nsect = scsicmd[12];
- tf->hob_lbal = scsicmd[6];
- tf->hob_lbam = scsicmd[5];
- tf->hob_lbah = scsicmd[4];
-
- qc->nsect = ((unsigned int)scsicmd[12] << 8) |
- scsicmd[13];
- } else {
- /* once again, filter out impossible non-zero values */
- if (scsicmd[4] || scsicmd[5] || scsicmd[12] ||
- (scsicmd[6] & 0xf0))
- return 1;
-
- /* stores LBA27:24 in lower 4 bits of device reg */
- tf->device |= scsicmd[6];
-
- qc->nsect = scsicmd[13];
- }
-
- tf->nsect = scsicmd[13];
- tf->lbal = scsicmd[9];
- tf->lbam = scsicmd[8];
- tf->lbah = scsicmd[7];
-
- VPRINTK("sixteen-byte command\n");
- if (qc->nsect == 0) /* we don't support length==0 cmds */
- return 1;
- return 0;
- }
-
- DPRINTK("no-byte command\n");
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
return 1;
}
-static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+static int ata_scsi_qc_complete(struct ata_queued_cmd *qc,
+ unsigned int err_mask)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ u8 *cdb = cmd->cmnd;
+ int need_sense = (err_mask != 0);
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
- else
- cmd->result = SAM_STAT_GOOD;
+ /* For ATA pass thru (SAT) commands, generate a sense block if
+ * user mandated it or if there's an error. Note that if we
+ * generate because the user forced us to, a check condition
+ * is generated and the ATA register values are returned
+ * whether the command completed successfully or not. If there
+ * was no error, SK, ASC and ASCQ will all be zero.
+ */
+ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
+ ((cdb[2] & 0x20) || need_sense)) {
+ ata_gen_ata_desc_sense(qc);
+ } else {
+ if (!need_sense) {
+ cmd->result = SAM_STAT_GOOD;
+ } else {
+ /* TODO: decide which descriptor format to use
+ * for 48b LBA devices and call that here
+ * instead of the fixed desc, which is only
+ * good for smaller LBA (and maybe CHS?)
+ * devices.
+ */
+ ata_gen_fixed_sense(qc);
+ }
+ }
+
+ if (need_sense) {
+ /* The ata_gen_..._sense routines fill in tf */
+ ata_dump_status(qc->ap->id, &qc->tf);
+ }
qc->scsidone(cmd);
@@ -731,6 +1263,12 @@
* This function sets up an ata_queued_cmd structure for the
* SCSI command, and sends that ata_queued_cmd to the hardware.
*
+ * The xlat_func argument (actor) returns 0 if ready to execute
+ * ATA command, else 1 to finish translation. If 1 is returned
+ * then cmd->result (and possibly cmd->sense_buffer) are assumed
+ * to be set reflecting an error condition or clean (early)
+ * termination.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
@@ -747,7 +1285,7 @@
qc = ata_scsi_qc_new(ap, dev, cmd, done);
if (!qc)
- return;
+ goto err_mem;
/* data is present; dma-map it */
if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
@@ -755,7 +1293,7 @@
if (unlikely(cmd->request_bufflen < 1)) {
printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n",
ap->id, dev->devno);
- goto err_out;
+ goto err_did;
}
if (cmd->use_sg)
@@ -770,19 +1308,28 @@
qc->complete_fn = ata_scsi_qc_complete;
if (xlat_func(qc, scsicmd))
- goto err_out;
+ goto early_finish;
/* select device, send command to hardware */
if (ata_qc_issue(qc))
- goto err_out;
+ goto err_did;
VPRINTK("EXIT\n");
return;
-err_out:
+early_finish:
+ ata_qc_free(qc);
+ done(cmd);
+ DPRINTK("EXIT - early finish (good or error)\n");
+ return;
+
+err_did:
ata_qc_free(qc);
- ata_bad_cdb(cmd, done);
- DPRINTK("EXIT - badcmd\n");
+err_mem:
+ cmd->result = (DID_ERROR << 16);
+ done(cmd);
+ DPRINTK("EXIT - internal\n");
+ return;
}
/**
@@ -849,7 +1396,8 @@
* Mapping the response buffer, calling the command's handler,
* and handling the handler's return value. This return value
* indicates whether the handler wishes the SCSI command to be
- * completed successfully, or not.
+ * completed successfully (0), or not (in which case cmd->result
+ * and sense buffer are assumed to be set).
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
@@ -868,12 +1416,9 @@
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
- if (rc)
- ata_bad_cdb(cmd, args->done);
- else {
+ if (rc == 0)
cmd->result = SAM_STAT_GOOD;
- args->done(cmd);
- }
+ args->done(cmd);
}
/**
@@ -1087,13 +1632,9 @@
static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io,
const u8 *last)
{
- u8 page[] = {
- 0x8, /* page code */
- 0x12, /* page length */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */
- 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */
- };
+ u8 page[CACHE_MPAGE_LEN];
+ memcpy(page, def_cache_mpage, sizeof(page));
if (ata_id_wcache_enabled(id))
page[2] |= (1 << 2); /* write cache enable */
if (!ata_id_rahead_enabled(id))
@@ -1117,15 +1658,9 @@
static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30};
-
- /* byte 2: set the descriptor format sense data bit (bit 2)
- * since we need to support returning this format for SAT
- * commands and any SCSI commands against a 48b LBA device.
- */
-
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_control_mpage,
+ sizeof(def_control_mpage));
+ return sizeof(def_control_mpage);
}
/**
@@ -1142,15 +1677,10 @@
static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {
- 0x1, /* page code */
- 0xa, /* page length */
- (1 << 7) | (1 << 6), /* note auto r/w reallocation */
- 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */
- };
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_rw_recovery_mpage,
+ sizeof(def_rw_recovery_mpage));
+ return sizeof(def_rw_recovery_mpage);
}
/**
@@ -1159,7 +1689,9 @@
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
- * Simulate MODE SENSE commands.
+ * Simulate MODE SENSE commands. Assume this is invoked for direct
+ * access devices (e.g. disks) only. There should be no block
+ * descriptor for other device types.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
@@ -1169,61 +1701,115 @@
unsigned int buflen)
{
u8 *scsicmd = args->cmd->cmnd, *p, *last;
- unsigned int page_control, six_byte, output_len;
+ const u8 sat_blk_desc[] = {
+ 0, 0, 0, 0, /* number of blocks: sat unspecified */
+ 0,
+ 0, 0x2, 0x0 /* block length: 512 bytes */
+ };
+ u8 pg, spg;
+ unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen;
VPRINTK("ENTER\n");
six_byte = (scsicmd[0] == MODE_SENSE);
-
- /* we only support saved and current values (which we treat
- * in the same manner)
+ ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
+ /*
+ * LLBA bit in msense(10) ignored (compliant)
*/
- page_control = scsicmd[2] >> 6;
- if ((page_control != 0) && (page_control != 3))
- return 1;
- if (six_byte)
- output_len = 4;
- else
- output_len = 8;
+ page_control = scsicmd[2] >> 6;
+ switch (page_control) {
+ case 0: /* current */
+ break; /* supported */
+ case 3: /* saved */
+ goto saving_not_supp;
+ case 1: /* changeable */
+ case 2: /* defaults */
+ default:
+ goto invalid_fld;
+ }
+
+ if (six_byte) {
+ output_len = 4 + (ebd ? 8 : 0);
+ alloc_len = scsicmd[4];
+ } else {
+ output_len = 8 + (ebd ? 8 : 0);
+ alloc_len = (scsicmd[7] << 8) + scsicmd[8];
+ }
+ minlen = (alloc_len < buflen) ? alloc_len : buflen;
p = rbuf + output_len;
- last = rbuf + buflen - 1;
+ last = rbuf + minlen - 1;
- switch(scsicmd[2] & 0x3f) {
- case 0x01: /* r/w error recovery */
+ pg = scsicmd[2] & 0x3f;
+ spg = scsicmd[3];
+ /*
+ * No mode subpages supported (yet) but asking for _all_
+ * subpages may be valid
+ */
+ if (spg && (spg != ALL_SUB_MPAGES))
+ goto invalid_fld;
+
+ switch(pg) {
+ case RW_RECOVERY_MPAGE:
output_len += ata_msense_rw_recovery(&p, last);
break;
- case 0x08: /* caching */
+ case CACHE_MPAGE:
output_len += ata_msense_caching(args->id, &p, last);
break;
- case 0x0a: { /* control mode */
+ case CONTROL_MPAGE: {
output_len += ata_msense_ctl_mode(&p, last);
break;
}
- case 0x3f: /* all pages */
+ case ALL_MPAGES:
output_len += ata_msense_rw_recovery(&p, last);
output_len += ata_msense_caching(args->id, &p, last);
output_len += ata_msense_ctl_mode(&p, last);
break;
default: /* invalid page code */
- return 1;
+ goto invalid_fld;
}
+ if (minlen < 1)
+ return 0;
if (six_byte) {
output_len--;
rbuf[0] = output_len;
+ if (ebd) {
+ if (minlen > 3)
+ rbuf[3] = sizeof(sat_blk_desc);
+ if (minlen > 11)
+ memcpy(rbuf + 4, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
} else {
output_len -= 2;
rbuf[0] = output_len >> 8;
- rbuf[1] = output_len;
+ if (minlen > 1)
+ rbuf[1] = output_len;
+ if (ebd) {
+ if (minlen > 7)
+ rbuf[7] = sizeof(sat_blk_desc);
+ if (minlen > 15)
+ memcpy(rbuf + 8, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
}
-
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+saving_not_supp:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0);
+ /* "Saving parameters not supported" */
+ return 1;
}
/**
@@ -1246,10 +1832,20 @@
VPRINTK("ENTER\n");
- if (ata_id_has_lba48(args->id))
- n_sectors = ata_id_u64(args->id, 100);
- else
- n_sectors = ata_id_u32(args->id, 60);
+ if (ata_id_has_lba(args->id)) {
+ if (ata_id_has_lba48(args->id))
+ n_sectors = ata_id_u64(args->id, 100);
+ else
+ n_sectors = ata_id_u32(args->id, 60);
+ } else {
+ /* CHS default translation */
+ n_sectors = args->id[1] * args->id[3] * args->id[6];
+
+ if (ata_id_current_chs_valid(args->id))
+ /* CHS current translation */
+ n_sectors = ata_id_u32(args->id, 57);
+ }
+
n_sectors--; /* ATA TotalUserSectors - 1 */
if (args->cmd->cmnd[0] == READ_CAPACITY) {
@@ -1313,6 +1909,34 @@
}
/**
+ * ata_scsi_set_sense - Set SCSI sense data and status
+ * @cmd: SCSI request to be handled
+ * @sk: SCSI-defined sense key
+ * @asc: SCSI-defined additional sense code
+ * @ascq: SCSI-defined additional sense code qualifier
+ *
+ * Helper function that builds a valid fixed format, current
+ * response code and the given sense key (sk), additional sense
+ * code (asc) and additional sense code qualifier (ascq) with
+ * a SCSI command status of %SAM_STAT_CHECK_CONDITION and
+ * DRIVER_SENSE set in the upper bits of scsi_cmnd::result .
+ *
+ * LOCKING:
+ * Not required
+ */
+
+void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+{
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ cmd->sense_buffer[0] = 0x70; /* fixed format, current */
+ cmd->sense_buffer[2] = sk;
+ cmd->sense_buffer[7] = 18 - 8; /* additional sense length */
+ cmd->sense_buffer[12] = asc;
+ cmd->sense_buffer[13] = ascq;
+}
+
+/**
* ata_scsi_badcmd - End a SCSI request with an error
* @cmd: SCSI request to be handled
* @done: SCSI command completion function
@@ -1330,30 +1954,89 @@
void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq)
{
DPRINTK("ENTER\n");
- cmd->result = SAM_STAT_CHECK_CONDITION;
-
- cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = ILLEGAL_REQUEST;
- cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */
- cmd->sense_buffer[12] = asc;
- cmd->sense_buffer[13] = ascq;
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq);
done(cmd);
}
-static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
+ struct scsi_cmnd *cmd)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ DPRINTK("ATAPI request sense\n");
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ /* FIXME: is this needed? */
+ memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+
+ ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ memset(&qc->cdb, 0, ap->cdb_len);
+ qc->cdb[0] = REQUEST_SENSE;
+ qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
+
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.command = ATA_CMD_PACKET;
+
+ qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.lbam = (8 * 1024) & 0xff;
+ qc->tf.lbah = (8 * 1024) >> 8;
+ qc->nbytes = SCSI_SENSE_BUFFERSIZE;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ ata_port_disable(ap);
+ else
+ wait_for_completion(&wait);
+
+ DPRINTK("EXIT\n");
+}
+
+static int atapi_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
{
struct scsi_cmnd *cmd = qc->scsicmd;
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) {
+ VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
+
+ if (unlikely(err_mask & AC_ERR_DEV)) {
DPRINTK("request check condition\n");
+ /* FIXME: command completion with check condition
+ * but no sense causes the error handler to run,
+ * which then issues REQUEST SENSE, fills in the sense
+ * buffer, and completes the command (for the second
+ * time). We need to issue REQUEST SENSE some other
+ * way, to avoid completing the command twice.
+ */
cmd->result = SAM_STAT_CHECK_CONDITION;
qc->scsidone(cmd);
return 1;
- } else {
+ }
+
+ else if (unlikely(err_mask))
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
+
+ else {
u8 *scsicmd = cmd->cmnd;
if (scsicmd[0] == INQUIRY) {
@@ -1361,15 +2044,30 @@
unsigned int buflen;
buflen = ata_scsi_rbuf_get(cmd, &buf);
- buf[2] = 0x5;
- buf[3] = (buf[3] & 0xf0) | 2;
+
+ /* ATAPI devices typically report zero for their SCSI version,
+ * and sometimes deviate from the spec WRT response data
+ * format. If SCSI version is reported as zero like normal,
+ * then we make the following fixups: 1) Fake MMC-5 version,
+ * to indicate to the Linux scsi midlayer this is a modern
+ * device. 2) Ensure response data format / ATAPI information
+ * are always correct.
+ */
+ /* FIXME: do we ever override EVPD pages and the like, with
+ * this code?
+ */
+ if (buf[2] == 0) {
+ buf[2] = 0x5;
+ buf[3] = 0x32;
+ }
+
ata_scsi_rbuf_put(cmd, buf);
}
+
cmd->result = SAM_STAT_GOOD;
}
qc->scsidone(cmd);
-
return 0;
}
/**
@@ -1384,7 +2082,7 @@
* Zero on success, non-zero on failure.
*/
-static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct scsi_cmnd *cmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
@@ -1453,7 +2151,7 @@
*/
static struct ata_device *
-ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev)
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
{
struct ata_device *dev;
@@ -1478,6 +2176,143 @@
return dev;
}
+/*
+ * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
+ * @byte1: Byte 1 from pass-thru CDB.
+ *
+ * RETURNS:
+ * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
+ */
+static u8
+ata_scsi_map_proto(u8 byte1)
+{
+ switch((byte1 & 0x1e) >> 1) {
+ case 3: /* Non-data */
+ return ATA_PROT_NODATA;
+
+ case 6: /* DMA */
+ return ATA_PROT_DMA;
+
+ case 4: /* PIO Data-in */
+ case 5: /* PIO Data-out */
+ if (byte1 & 0xe0) {
+ return ATA_PROT_PIO_MULT;
+ }
+ return ATA_PROT_PIO;
+
+ case 10: /* Device Reset */
+ case 0: /* Hard Reset */
+ case 1: /* SRST */
+ case 2: /* Bus Idle */
+ case 7: /* Packet */
+ case 8: /* DMA Queued */
+ case 9: /* Device Diagnostic */
+ case 11: /* UDMA Data-in */
+ case 12: /* UDMA Data-Out */
+ case 13: /* FPDMA */
+ default: /* Reserved */
+ break;
+ }
+
+ return ATA_PROT_UNKNOWN;
+}
+
+/**
+ * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
+ * @qc: command structure to be initialized
+ * @cmd: SCSI command to convert
+ *
+ * Handles either 12 or 16-byte versions of the CDB.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int
+ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &(qc->tf);
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ return 1;
+
+ /*
+ * 12 and 16 byte CDBs use different offsets to
+ * provide the various register values.
+ */
+ if (scsicmd[0] == ATA_16) {
+ /*
+ * 16-byte CDB - may contain extended commands.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (scsicmd[1] & 0x01) {
+ tf->hob_feature = scsicmd[3];
+ tf->hob_nsect = scsicmd[5];
+ tf->hob_lbal = scsicmd[7];
+ tf->hob_lbam = scsicmd[9];
+ tf->hob_lbah = scsicmd[11];
+ tf->flags |= ATA_TFLAG_LBA48;
+ } else
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ /*
+ * Always copy low byte, device and command registers.
+ */
+ tf->feature = scsicmd[4];
+ tf->nsect = scsicmd[6];
+ tf->lbal = scsicmd[8];
+ tf->lbam = scsicmd[10];
+ tf->lbah = scsicmd[12];
+ tf->device = scsicmd[13];
+ tf->command = scsicmd[14];
+ } else {
+ /*
+ * 12-byte CDB - incapable of extended commands.
+ */
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ tf->feature = scsicmd[3];
+ tf->nsect = scsicmd[4];
+ tf->lbal = scsicmd[5];
+ tf->lbam = scsicmd[6];
+ tf->lbah = scsicmd[7];
+ tf->device = scsicmd[8];
+ tf->command = scsicmd[9];
+ }
+
+ /*
+ * Filter SET_FEATURES - XFER MODE command -- otherwise,
+ * SET_FEATURES - XFER MODE must be preceded/succeeded
+ * by an update to hardware-specific registers for each
+ * controller (i.e. the reason for ->set_piomode(),
+ * ->set_dmamode(), and ->post_set_mode() hooks).
+ */
+ if ((tf->command == ATA_CMD_SET_FEATURES)
+ && (tf->feature == SETFEATURES_XFER))
+ return 1;
+
+ /*
+ * Set flags so that all registers will be written,
+ * and pass on write indication (used for PIO/DMA
+ * setup.)
+ */
+ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ qc->nsect = cmd->bufflen / ATA_SECT_SIZE;
+
+ return 0;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
@@ -1510,6 +2345,11 @@
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+
+ case ATA_12:
+ case ATA_16:
+ return ata_scsi_pass_thru;
+
case START_STOP:
return ata_scsi_start_stop_xlat;
}
@@ -1610,7 +2450,7 @@
void (*done)(struct scsi_cmnd *))
{
struct ata_scsi_args args;
- u8 *scsicmd = cmd->cmnd;
+ const u8 *scsicmd = cmd->cmnd;
args.id = id;
args.cmd = cmd;
@@ -1630,7 +2470,7 @@
case INQUIRY:
if (scsicmd[1] & 2) /* is CmdDt set? */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
else if (scsicmd[2] == 0x00)
@@ -1640,7 +2480,7 @@
else if (scsicmd[2] == 0x83)
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case MODE_SENSE:
@@ -1650,7 +2490,7 @@
case MODE_SELECT: /* unconditionally return */
case MODE_SELECT_10: /* bad-field-in-cdb */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case READ_CAPACITY:
@@ -1661,20 +2501,38 @@
if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case REPORT_LUNS:
ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
break;
- /* mandantory commands we haven't implemented yet */
+ /* mandatory commands we haven't implemented yet */
case REQUEST_SENSE:
/* all other commands */
default:
- ata_bad_scsiop(cmd, done);
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0);
+ /* "Invalid command operation code" */
+ done(cmd);
break;
}
}
+void ata_scsi_scan_host(struct ata_port *ap)
+{
+ struct ata_device *dev;
+ unsigned int i;
+
+ if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ return;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+
+ if (ata_dev_present(dev))
+ scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0);
+ }
+}
+
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index d608b3a..10ecd9e 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -39,19 +39,25 @@
/* libata-core.c */
extern int atapi_enabled;
+extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, unsigned int err_mask);
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
+extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern int ata_qc_issue(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
-extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
+extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
+extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
/* libata-scsi.c */
-extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat);
+extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
+ struct scsi_cmnd *cmd);
+extern void ata_scsi_scan_host(struct ata_port *ap);
extern int ata_scsi_error(struct Scsi_Host *host);
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
@@ -76,18 +82,10 @@
extern void ata_scsi_badcmd(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *),
u8 asc, u8 ascq);
+extern void ata_scsi_set_sense(struct scsi_cmnd *cmd,
+ u8 sk, u8 asc, u8 ascq);
extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
unsigned int (*actor) (struct ata_scsi_args *args,
u8 *rbuf, unsigned int buflen));
-static inline void ata_bad_scsiop(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
-{
- ata_scsi_badcmd(cmd, done, 0x20, 0x00);
-}
-
-static inline void ata_bad_cdb(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
-{
- ata_scsi_badcmd(cmd, done, 0x24, 0x00);
-}
-
#endif /* __LIBATA_H__ */
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 0aba13c..352df47 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -39,7 +39,7 @@
#define LPFC_MEM_POOL_SIZE 64 /* max elem in non-DMA safety pool */
static void *
-lpfc_pool_kmalloc(unsigned int gfp_flags, void *data)
+lpfc_pool_kmalloc(gfp_t gfp_flags, void *data)
{
return kmalloc((unsigned long)data, gfp_flags);
}
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index d47be8e..c9e743b 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -76,7 +76,7 @@
static int megaraid_probe_one(struct pci_dev*, const struct pci_device_id *);
static void megaraid_detach_one(struct pci_dev *);
-static void megaraid_mbox_shutdown(struct device *);
+static void megaraid_mbox_shutdown(struct pci_dev *);
static int megaraid_io_attach(adapter_t *);
static void megaraid_io_detach(adapter_t *);
@@ -369,9 +369,7 @@
.id_table = pci_id_table_g,
.probe = megaraid_probe_one,
.remove = __devexit_p(megaraid_detach_one),
- .driver = {
- .shutdown = megaraid_mbox_shutdown,
- }
+ .shutdown = megaraid_mbox_shutdown,
};
@@ -673,9 +671,9 @@
* Shutdown notification, perform flush cache
*/
static void
-megaraid_mbox_shutdown(struct device *device)
+megaraid_mbox_shutdown(struct pci_dev *pdev)
{
- adapter_t *adapter = pci_get_drvdata(to_pci_dev(device));
+ adapter_t *adapter = pci_get_drvdata(pdev);
static int counter;
if (!adapter) {
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index b235556..bdccf73 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -730,7 +730,7 @@
* issue a SEQ_MSGOUT to get the mesh to drop ACK.
*/
if ((in_8(&mr->bus_status0) & BS0_ATN) == 0) {
- dlog(ms, "bus0 was %.2x explictly asserting ATN", mr->bus_status0);
+ dlog(ms, "bus0 was %.2x explicitly asserting ATN", mr->bus_status0);
out_8(&mr->bus_status0, BS0_ATN); /* explicit ATN */
mesh_flush_io(mr);
udelay(1);
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 3f2f246..172839f 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -5146,7 +5146,8 @@
/* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */
static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg )
{
- int i, priority;
+ int i;
+ gfp_t priority;
struct osst_buffer *tb;
if (from_initialization)
@@ -5178,7 +5179,8 @@
/* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */
static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma)
{
- int segs, nbr, max_segs, b_size, priority, order, got;
+ int segs, nbr, max_segs, b_size, order, got;
+ gfp_t priority;
if (STbuffer->buffer_size >= OS_FRAME_SIZE)
return 1;
@@ -5627,7 +5629,7 @@
if (!osst_sysfs_valid) return;
- osst_class_member = class_device_create(osst_sysfs_class, dev, device, "%s", name);
+ osst_class_member = class_device_create(osst_sysfs_class, NULL, dev, device, "%s", name);
if (IS_ERR(osst_class_member)) {
printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
return;
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
new file mode 100644
index 0000000..665017e
--- /dev/null
+++ b/drivers/scsi/pdc_adma.c
@@ -0,0 +1,741 @@
+/*
+ * pdc_adma.c - Pacific Digital Corporation ADMA
+ *
+ * Maintained by: Mark Lord <mlord@pobox.com>
+ *
+ * Copyright 2005 Mark Lord
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ *
+ * Supports ATA disks in single-packet ADMA mode.
+ * Uses PIO for everything else.
+ *
+ * TODO: Use ADMA transfers for ATAPI devices, when possible.
+ * This requires careful attention to a number of quirks of the chip.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <asm/io.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pdc_adma"
+#define DRV_VERSION "0.03"
+
+/* macro to calculate base address for ATA regs */
+#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
+
+/* macro to calculate base address for ADMA regs */
+#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20))
+
+enum {
+ ADMA_PORTS = 2,
+ ADMA_CPB_BYTES = 40,
+ ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16,
+ ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES,
+
+ ADMA_DMA_BOUNDARY = 0xffffffff,
+
+ /* global register offsets */
+ ADMA_MODE_LOCK = 0x00c7,
+
+ /* per-channel register offsets */
+ ADMA_CONTROL = 0x0000, /* ADMA control */
+ ADMA_STATUS = 0x0002, /* ADMA status */
+ ADMA_CPB_COUNT = 0x0004, /* CPB count */
+ ADMA_CPB_CURRENT = 0x000c, /* current CPB address */
+ ADMA_CPB_NEXT = 0x000c, /* next CPB address */
+ ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */
+ ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */
+ ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */
+
+ /* ADMA_CONTROL register bits */
+ aNIEN = (1 << 8), /* irq mask: 1==masked */
+ aGO = (1 << 7), /* packet trigger ("Go!") */
+ aRSTADM = (1 << 5), /* ADMA logic reset */
+ aPIOMD4 = 0x0003, /* PIO mode 4 */
+
+ /* ADMA_STATUS register bits */
+ aPSD = (1 << 6),
+ aUIRQ = (1 << 4),
+ aPERR = (1 << 0),
+
+ /* CPB bits */
+ cDONE = (1 << 0),
+ cVLD = (1 << 0),
+ cDAT = (1 << 2),
+ cIEN = (1 << 3),
+
+ /* PRD bits */
+ pORD = (1 << 4),
+ pDIRO = (1 << 5),
+ pEND = (1 << 7),
+
+ /* ATA register flags */
+ rIGN = (1 << 5),
+ rEND = (1 << 7),
+
+ /* ATA register addresses */
+ ADMA_REGS_CONTROL = 0x0e,
+ ADMA_REGS_SECTOR_COUNT = 0x12,
+ ADMA_REGS_LBA_LOW = 0x13,
+ ADMA_REGS_LBA_MID = 0x14,
+ ADMA_REGS_LBA_HIGH = 0x15,
+ ADMA_REGS_DEVICE = 0x16,
+ ADMA_REGS_COMMAND = 0x17,
+
+ /* PCI device IDs */
+ board_1841_idx = 0, /* ADMA 2-port controller */
+};
+
+typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t;
+
+struct adma_port_priv {
+ u8 *pkt;
+ dma_addr_t pkt_dma;
+ adma_state_t state;
+};
+
+static int adma_ata_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+static irqreturn_t adma_intr (int irq, void *dev_instance,
+ struct pt_regs *regs);
+static int adma_port_start(struct ata_port *ap);
+static void adma_host_stop(struct ata_host_set *host_set);
+static void adma_port_stop(struct ata_port *ap);
+static void adma_phy_reset(struct ata_port *ap);
+static void adma_qc_prep(struct ata_queued_cmd *qc);
+static int adma_qc_issue(struct ata_queued_cmd *qc);
+static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
+static void adma_bmdma_stop(struct ata_queued_cmd *qc);
+static u8 adma_bmdma_status(struct ata_port *ap);
+static void adma_irq_clear(struct ata_port *ap);
+static void adma_eng_timeout(struct ata_port *ap);
+
+static Scsi_Host_Template adma_ata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ENABLE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ADMA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static const struct ata_port_operations adma_ata_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .check_atapi_dma = adma_check_atapi_dma,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .phy_reset = adma_phy_reset,
+ .qc_prep = adma_qc_prep,
+ .qc_issue = adma_qc_issue,
+ .eng_timeout = adma_eng_timeout,
+ .irq_handler = adma_intr,
+ .irq_clear = adma_irq_clear,
+ .port_start = adma_port_start,
+ .port_stop = adma_port_stop,
+ .host_stop = adma_host_stop,
+ .bmdma_stop = adma_bmdma_stop,
+ .bmdma_status = adma_bmdma_status,
+};
+
+static struct ata_port_info adma_port_info[] = {
+ /* board_1841_idx */
+ {
+ .sht = &adma_ata_sht,
+ .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
+ ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO,
+ .pio_mask = 0x10, /* pio4 */
+ .udma_mask = 0x1f, /* udma0-4 */
+ .port_ops = &adma_ata_ops,
+ },
+};
+
+static struct pci_device_id adma_ata_pci_tbl[] = {
+ { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_1841_idx },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver adma_ata_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = adma_ata_pci_tbl,
+ .probe = adma_ata_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static int adma_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return 1; /* ATAPI DMA not yet supported */
+}
+
+static void adma_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ /* nothing */
+}
+
+static u8 adma_bmdma_status(struct ata_port *ap)
+{
+ return 0;
+}
+
+static void adma_irq_clear(struct ata_port *ap)
+{
+ /* nothing */
+}
+
+static void adma_reset_engine(void __iomem *chan)
+{
+ /* reset ADMA to idle state */
+ writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
+ udelay(2);
+ writew(aPIOMD4, chan + ADMA_CONTROL);
+ udelay(2);
+}
+
+static void adma_reinit_engine(struct ata_port *ap)
+{
+ struct adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio_base = ap->host_set->mmio_base;
+ void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no);
+
+ /* mask/clear ATA interrupts */
+ writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr);
+ ata_check_status(ap);
+
+ /* reset the ADMA engine */
+ adma_reset_engine(chan);
+
+ /* set in-FIFO threshold to 0x100 */
+ writew(0x100, chan + ADMA_FIFO_IN);
+
+ /* set CPB pointer */
+ writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT);
+
+ /* set out-FIFO threshold to 0x100 */
+ writew(0x100, chan + ADMA_FIFO_OUT);
+
+ /* set CPB count */
+ writew(1, chan + ADMA_CPB_COUNT);
+
+ /* read/discard ADMA status */
+ readb(chan + ADMA_STATUS);
+}
+
+static inline void adma_enter_reg_mode(struct ata_port *ap)
+{
+ void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no);
+
+ writew(aPIOMD4, chan + ADMA_CONTROL);
+ readb(chan + ADMA_STATUS); /* flush */
+}
+
+static void adma_phy_reset(struct ata_port *ap)
+{
+ struct adma_port_priv *pp = ap->private_data;
+
+ pp->state = adma_state_idle;
+ adma_reinit_engine(ap);
+ ata_port_probe(ap);
+ ata_bus_reset(ap);
+}
+
+static void adma_eng_timeout(struct ata_port *ap)
+{
+ struct adma_port_priv *pp = ap->private_data;
+
+ if (pp->state != adma_state_idle) /* healthy paranoia */
+ pp->state = adma_state_mmio;
+ adma_reinit_engine(ap);
+ ata_eng_timeout(ap);
+}
+
+static int adma_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct scatterlist *sg = qc->sg;
+ struct ata_port *ap = qc->ap;
+ struct adma_port_priv *pp = ap->private_data;
+ u8 *buf = pp->pkt;
+ int nelem, i = (2 + buf[3]) * 8;
+ u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0);
+
+ for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) {
+ u32 addr;
+ u32 len;
+
+ addr = (u32)sg_dma_address(sg);
+ *(__le32 *)(buf + i) = cpu_to_le32(addr);
+ i += 4;
+
+ len = sg_dma_len(sg) >> 3;
+ *(__le32 *)(buf + i) = cpu_to_le32(len);
+ i += 4;
+
+ if ((nelem + 1) == qc->n_elem)
+ pFLAGS |= pEND;
+ buf[i++] = pFLAGS;
+ buf[i++] = qc->dev->dma_mode & 0xf;
+ buf[i++] = 0; /* pPKLW */
+ buf[i++] = 0; /* reserved */
+
+ *(__le32 *)(buf + i)
+ = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
+ i += 4;
+
+ VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", nelem,
+ (unsigned long)addr, len);
+ }
+ return i;
+}
+
+static void adma_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct adma_port_priv *pp = qc->ap->private_data;
+ u8 *buf = pp->pkt;
+ u32 pkt_dma = (u32)pp->pkt_dma;
+ int i = 0;
+
+ VPRINTK("ENTER\n");
+
+ adma_enter_reg_mode(qc->ap);
+ if (qc->tf.protocol != ATA_PROT_DMA) {
+ ata_qc_prep(qc);
+ return;
+ }
+
+ buf[i++] = 0; /* Response flags */
+ buf[i++] = 0; /* reserved */
+ buf[i++] = cVLD | cDAT | cIEN;
+ i++; /* cLEN, gets filled in below */
+
+ *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */
+ i += 4; /* cNCPB */
+ i += 4; /* cPRD, gets filled in below */
+
+ buf[i++] = 0; /* reserved */
+ buf[i++] = 0; /* reserved */
+ buf[i++] = 0; /* reserved */
+ buf[i++] = 0; /* reserved */
+
+ /* ATA registers; must be a multiple of 4 */
+ buf[i++] = qc->tf.device;
+ buf[i++] = ADMA_REGS_DEVICE;
+ if ((qc->tf.flags & ATA_TFLAG_LBA48)) {
+ buf[i++] = qc->tf.hob_nsect;
+ buf[i++] = ADMA_REGS_SECTOR_COUNT;
+ buf[i++] = qc->tf.hob_lbal;
+ buf[i++] = ADMA_REGS_LBA_LOW;
+ buf[i++] = qc->tf.hob_lbam;
+ buf[i++] = ADMA_REGS_LBA_MID;
+ buf[i++] = qc->tf.hob_lbah;
+ buf[i++] = ADMA_REGS_LBA_HIGH;
+ }
+ buf[i++] = qc->tf.nsect;
+ buf[i++] = ADMA_REGS_SECTOR_COUNT;
+ buf[i++] = qc->tf.lbal;
+ buf[i++] = ADMA_REGS_LBA_LOW;
+ buf[i++] = qc->tf.lbam;
+ buf[i++] = ADMA_REGS_LBA_MID;
+ buf[i++] = qc->tf.lbah;
+ buf[i++] = ADMA_REGS_LBA_HIGH;
+ buf[i++] = 0;
+ buf[i++] = ADMA_REGS_CONTROL;
+ buf[i++] = rIGN;
+ buf[i++] = 0;
+ buf[i++] = qc->tf.command;
+ buf[i++] = ADMA_REGS_COMMAND | rEND;
+
+ buf[3] = (i >> 3) - 2; /* cLEN */
+ *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */
+
+ i = adma_fill_sg(qc);
+ wmb(); /* flush PRDs and pkt to memory */
+#if 0
+ /* dump out CPB + PRDs for debug */
+ {
+ int j, len = 0;
+ static char obuf[2048];
+ for (j = 0; j < i; ++j) {
+ len += sprintf(obuf+len, "%02x ", buf[j]);
+ if ((j & 7) == 7) {
+ printk("%s\n", obuf);
+ len = 0;
+ }
+ }
+ if (len)
+ printk("%s\n", obuf);
+ }
+#endif
+}
+
+static inline void adma_packet_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no);
+
+ VPRINTK("ENTER, ap %p\n", ap);
+
+ /* fire up the ADMA engine */
+ writew(aPIOMD4 | aGO, chan + ADMA_CONTROL);
+}
+
+static int adma_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct adma_port_priv *pp = qc->ap->private_data;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ pp->state = adma_state_pkt;
+ adma_packet_start(qc);
+ return 0;
+
+ case ATA_PROT_ATAPI_DMA:
+ BUG();
+ break;
+
+ default:
+ break;
+ }
+
+ pp->state = adma_state_mmio;
+ return ata_qc_issue_prot(qc);
+}
+
+static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set)
+{
+ unsigned int handled = 0, port_no;
+ u8 __iomem *mmio_base = host_set->mmio_base;
+
+ for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
+ struct ata_port *ap = host_set->ports[port_no];
+ struct adma_port_priv *pp;
+ struct ata_queued_cmd *qc;
+ void __iomem *chan = ADMA_REGS(mmio_base, port_no);
+ u8 status = readb(chan + ADMA_STATUS);
+
+ if (status == 0)
+ continue;
+ handled = 1;
+ adma_enter_reg_mode(ap);
+ if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
+ continue;
+ pp = ap->private_data;
+ if (!pp || pp->state != adma_state_pkt)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ unsigned int err_mask = 0;
+
+ if ((status & (aPERR | aPSD | aUIRQ)))
+ err_mask = AC_ERR_OTHER;
+ else if (pp->pkt[0] != cDONE)
+ err_mask = AC_ERR_OTHER;
+
+ ata_qc_complete(qc, err_mask);
+ }
+ }
+ return handled;
+}
+
+static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set)
+{
+ unsigned int handled = 0, port_no;
+
+ for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
+ struct ata_port *ap;
+ ap = host_set->ports[port_no];
+ if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) {
+ struct ata_queued_cmd *qc;
+ struct adma_port_priv *pp = ap->private_data;
+ if (!pp || pp->state != adma_state_mmio)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+
+ /* check main status, clearing INTRQ */
+ u8 status = ata_check_status(ap);
+ if ((status & ATA_BUSY))
+ continue;
+ DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, status);
+
+ /* complete taskfile transaction */
+ pp->state = adma_state_idle;
+ ata_qc_complete(qc, ac_err_mask(status));
+ handled = 1;
+ }
+ }
+ }
+ return handled;
+}
+
+static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ unsigned int handled = 0;
+
+ VPRINTK("ENTER\n");
+
+ spin_lock(&host_set->lock);
+ handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set);
+ spin_unlock(&host_set->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base)
+{
+ port->cmd_addr =
+ port->data_addr = base + 0x000;
+ port->error_addr =
+ port->feature_addr = base + 0x004;
+ port->nsect_addr = base + 0x008;
+ port->lbal_addr = base + 0x00c;
+ port->lbam_addr = base + 0x010;
+ port->lbah_addr = base + 0x014;
+ port->device_addr = base + 0x018;
+ port->status_addr =
+ port->command_addr = base + 0x01c;
+ port->altstatus_addr =
+ port->ctl_addr = base + 0x038;
+}
+
+static int adma_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct adma_port_priv *pp;
+ int rc;
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+ adma_enter_reg_mode(ap);
+ rc = -ENOMEM;
+ pp = kcalloc(1, sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ goto err_out;
+ pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma,
+ GFP_KERNEL);
+ if (!pp->pkt)
+ goto err_out_kfree;
+ /* paranoia? */
+ if ((pp->pkt_dma & 7) != 0) {
+ printk("bad alignment for pp->pkt_dma: %08x\n",
+ (u32)pp->pkt_dma);
+ dma_free_coherent(dev, ADMA_PKT_BYTES,
+ pp->pkt, pp->pkt_dma);
+ goto err_out_kfree;
+ }
+ memset(pp->pkt, 0, ADMA_PKT_BYTES);
+ ap->private_data = pp;
+ adma_reinit_engine(ap);
+ return 0;
+
+err_out_kfree:
+ kfree(pp);
+err_out:
+ ata_port_stop(ap);
+ return rc;
+}
+
+static void adma_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct adma_port_priv *pp = ap->private_data;
+
+ adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no));
+ if (pp != NULL) {
+ ap->private_data = NULL;
+ if (pp->pkt != NULL)
+ dma_free_coherent(dev, ADMA_PKT_BYTES,
+ pp->pkt, pp->pkt_dma);
+ kfree(pp);
+ }
+ ata_port_stop(ap);
+}
+
+static void adma_host_stop(struct ata_host_set *host_set)
+{
+ unsigned int port_no;
+
+ for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
+ adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no));
+
+ ata_pci_host_stop(host_set);
+}
+
+static void adma_host_init(unsigned int chip_id,
+ struct ata_probe_ent *probe_ent)
+{
+ unsigned int port_no;
+ void __iomem *mmio_base = probe_ent->mmio_base;
+
+ /* enable/lock aGO operation */
+ writeb(7, mmio_base + ADMA_MODE_LOCK);
+
+ /* reset the ADMA logic */
+ for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
+ adma_reset_engine(ADMA_REGS(mmio_base, port_no));
+}
+
+static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
+{
+ int rc;
+
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ return 0;
+}
+
+static int adma_ata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct ata_probe_ent *probe_ent = NULL;
+ void __iomem *mmio_base;
+ unsigned int board_idx = (unsigned int) ent->driver_data;
+ int rc, port_no;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+
+ if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) {
+ rc = -ENODEV;
+ goto err_out_regions;
+ }
+
+ mmio_base = pci_iomap(pdev, 4, 0);
+ if (mmio_base == NULL) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ rc = adma_set_dma_masks(pdev, mmio_base);
+ if (rc)
+ goto err_out_iounmap;
+
+ probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL);
+ if (probe_ent == NULL) {
+ rc = -ENOMEM;
+ goto err_out_iounmap;
+ }
+
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = adma_port_info[board_idx].sht;
+ probe_ent->host_flags = adma_port_info[board_idx].host_flags;
+ probe_ent->pio_mask = adma_port_info[board_idx].pio_mask;
+ probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask;
+ probe_ent->udma_mask = adma_port_info[board_idx].udma_mask;
+ probe_ent->port_ops = adma_port_info[board_idx].port_ops;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->mmio_base = mmio_base;
+ probe_ent->n_ports = ADMA_PORTS;
+
+ for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
+ adma_ata_setup_port(&probe_ent->port[port_no],
+ ADMA_ATA_REGS((unsigned long)mmio_base, port_no));
+ }
+
+ pci_set_master(pdev);
+
+ /* initialize adapter */
+ adma_host_init(board_idx, probe_ent);
+
+ rc = ata_device_add(probe_ent);
+ kfree(probe_ent);
+ if (rc != ADMA_PORTS)
+ goto err_out_iounmap;
+ return 0;
+
+err_out_iounmap:
+ pci_iounmap(pdev, mmio_base);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static int __init adma_ata_init(void)
+{
+ return pci_module_init(&adma_ata_pci_driver);
+}
+
+static void __exit adma_ata_exit(void)
+{
+ pci_unregister_driver(&adma_ata_pci_driver);
+}
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(adma_ata_init);
+module_exit(adma_ata_exit);
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 1ed32e7..e451941 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -52,7 +52,7 @@
extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *);
extern int qla24xx_load_risc_hotplug(scsi_qla_host_t *, uint32_t *);
-extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, int);
+extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t);
extern int qla2x00_loop_resync(scsi_qla_host_t *);
@@ -277,7 +277,7 @@
/*
* Global Function Prototypes in qla_rscn.c source file.
*/
-extern fc_port_t *qla2x00_alloc_rscn_fcport(scsi_qla_host_t *, int);
+extern fc_port_t *qla2x00_alloc_rscn_fcport(scsi_qla_host_t *, gfp_t);
extern int qla2x00_handle_port_rscn(scsi_qla_host_t *, uint32_t, fc_port_t *,
int);
extern void qla2x00_process_iodesc(scsi_qla_host_t *, struct mbx_entry *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 23d095d..fbb6fee 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1685,7 +1685,7 @@
* Returns a pointer to the allocated fcport, or NULL, if none available.
*/
fc_port_t *
-qla2x00_alloc_fcport(scsi_qla_host_t *ha, int flags)
+qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags)
{
fc_port_t *fcport;
diff --git a/drivers/scsi/qla2xxx/qla_rscn.c b/drivers/scsi/qla2xxx/qla_rscn.c
index 1eba988..7534efc 100644
--- a/drivers/scsi/qla2xxx/qla_rscn.c
+++ b/drivers/scsi/qla2xxx/qla_rscn.c
@@ -1066,7 +1066,7 @@
* Returns a pointer to the allocated RSCN fcport, or NULL, if none available.
*/
fc_port_t *
-qla2x00_alloc_rscn_fcport(scsi_qla_host_t *ha, int flags)
+qla2x00_alloc_rscn_fcport(scsi_qla_host_t *ha, gfp_t flags)
{
fc_port_t *fcport;
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index ea76fe4..46dbdee 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -29,13 +29,14 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.12"
+#define DRV_VERSION "0.25"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -55,31 +56,61 @@
MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
- MV_Q_CT = 32,
- MV_CRQB_SZ = 32,
- MV_CRPB_SZ = 8,
+ MV_USE_Q_DEPTH = ATA_DEF_QUEUE,
- MV_DMA_BOUNDARY = 0xffffffffU,
- SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)),
+ MV_MAX_Q_DEPTH = 32,
+ MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
+
+ /* CRQB needs alignment on a 1KB boundary. Size == 1KB
+ * CRPB needs alignment on a 256B boundary. Size == 256B
+ * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB
+ * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
+ */
+ MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
+ MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
+ MV_MAX_SG_CT = 176,
+ MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
+ MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
+
+ /* Our DMA boundary is determined by an ePRD being unable to handle
+ * anything larger than 64KB
+ */
+ MV_DMA_BOUNDARY = 0xffffU,
MV_PORTS_PER_HC = 4,
/* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
MV_PORT_HC_SHIFT = 2,
- /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */
+ /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */
MV_PORT_MASK = 3,
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- MV_FLAG_BDMA = (1 << 28), /* Basic DMA */
+ MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */
+ MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
+ MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE |
+ MV_FLAG_GLBL_SFT_RST),
chip_504x = 0,
chip_508x = 1,
chip_604x = 2,
chip_608x = 3,
+ CRQB_FLAG_READ = (1 << 0),
+ CRQB_TAG_SHIFT = 1,
+ CRQB_CMD_ADDR_SHIFT = 8,
+ CRQB_CMD_CS = (0x2 << 11),
+ CRQB_CMD_LAST = (1 << 15),
+
+ CRPB_FLAG_STATUS_SHIFT = 8,
+
+ EPRD_FLAG_END_OF_TBL = (1 << 31),
+
/* PCI interface registers */
+ PCI_COMMAND_OFS = 0xc00,
+
PCI_MAIN_CMD_STS_OFS = 0xd30,
STOP_PCI_MASTER = (1 << 2),
PCI_MASTER_EMPTY = (1 << 3),
@@ -111,20 +142,13 @@
HC_CFG_OFS = 0,
HC_IRQ_CAUSE_OFS = 0x14,
- CRBP_DMA_DONE = (1 << 0), /* shift by port # */
+ CRPB_DMA_DONE = (1 << 0), /* shift by port # */
HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */
DEV_IRQ = (1 << 8), /* shift by port # */
/* Shadow block registers */
- SHD_PIO_DATA_OFS = 0x100,
- SHD_FEA_ERR_OFS = 0x104,
- SHD_SECT_CNT_OFS = 0x108,
- SHD_LBA_L_OFS = 0x10C,
- SHD_LBA_M_OFS = 0x110,
- SHD_LBA_H_OFS = 0x114,
- SHD_DEV_HD_OFS = 0x118,
- SHD_CMD_STA_OFS = 0x11C,
- SHD_CTL_AST_OFS = 0x120,
+ SHD_BLK_OFS = 0x100,
+ SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */
/* SATA registers */
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
@@ -132,6 +156,11 @@
/* Port registers */
EDMA_CFG_OFS = 0,
+ EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */
+ EDMA_CFG_NCQ = (1 << 5),
+ EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
+ EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
+ EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
EDMA_ERR_IRQ_MASK_OFS = 0xc,
@@ -161,33 +190,84 @@
EDMA_ERR_LNK_DATA_TX |
EDMA_ERR_TRANS_PROTO),
+ EDMA_REQ_Q_BASE_HI_OFS = 0x10,
+ EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
+ EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
+
+ EDMA_REQ_Q_OUT_PTR_OFS = 0x18,
+ EDMA_REQ_Q_PTR_SHIFT = 5,
+
+ EDMA_RSP_Q_BASE_HI_OFS = 0x1c,
+ EDMA_RSP_Q_IN_PTR_OFS = 0x20,
+ EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
+ EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
+ EDMA_RSP_Q_PTR_SHIFT = 3,
+
EDMA_CMD_OFS = 0x28,
EDMA_EN = (1 << 0),
EDMA_DS = (1 << 1),
ATA_RST = (1 << 2),
- /* BDMA is 6xxx part only */
- BDMA_CMD_OFS = 0x224,
- BDMA_START = (1 << 0),
+ /* Host private flags (hp_flags) */
+ MV_HP_FLAG_MSI = (1 << 0),
- MV_UNDEF = 0,
+ /* Port private flags (pp_flags) */
+ MV_PP_FLAG_EDMA_EN = (1 << 0),
+ MV_PP_FLAG_EDMA_DS_ACT = (1 << 1),
+};
+
+/* Command ReQuest Block: 32B */
+struct mv_crqb {
+ u32 sg_addr;
+ u32 sg_addr_hi;
+ u16 ctrl_flags;
+ u16 ata_cmd[11];
+};
+
+/* Command ResPonse Block: 8B */
+struct mv_crpb {
+ u16 id;
+ u16 flags;
+ u32 tmstmp;
+};
+
+/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
+struct mv_sg {
+ u32 addr;
+ u32 flags_size;
+ u32 addr_hi;
+ u32 reserved;
};
struct mv_port_priv {
+ struct mv_crqb *crqb;
+ dma_addr_t crqb_dma;
+ struct mv_crpb *crpb;
+ dma_addr_t crpb_dma;
+ struct mv_sg *sg_tbl;
+ dma_addr_t sg_tbl_dma;
+ unsigned req_producer; /* cp of req_in_ptr */
+ unsigned rsp_consumer; /* cp of rsp_out_ptr */
+ u32 pp_flags;
};
struct mv_host_priv {
-
+ u32 hp_flags;
};
static void mv_irq_clear(struct ata_port *ap);
static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
static void mv_phy_reset(struct ata_port *ap);
-static int mv_master_reset(void __iomem *mmio_base);
+static void mv_host_stop(struct ata_host_set *host_set);
+static int mv_port_start(struct ata_port *ap);
+static void mv_port_stop(struct ata_port *ap);
+static void mv_qc_prep(struct ata_queued_cmd *qc);
+static int mv_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs);
+static void mv_eng_timeout(struct ata_port *ap);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static Scsi_Host_Template mv_sht = {
@@ -196,13 +276,13 @@
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.eh_strategy_handler = ata_scsi_error,
- .can_queue = ATA_DEF_QUEUE,
+ .can_queue = MV_USE_Q_DEPTH,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = MV_UNDEF,
+ .sg_tablesize = MV_MAX_SG_CT,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
- .use_clustering = MV_UNDEF,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
@@ -210,7 +290,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations mv_ops = {
+static const struct ata_port_operations mv_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -221,10 +301,10 @@
.phy_reset = mv_phy_reset,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+ .qc_prep = mv_qc_prep,
+ .qc_issue = mv_qc_issue,
- .eng_timeout = ata_eng_timeout,
+ .eng_timeout = mv_eng_timeout,
.irq_handler = mv_interrupt,
.irq_clear = mv_irq_clear,
@@ -232,46 +312,39 @@
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
- .port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+ .host_stop = mv_host_stop,
};
static struct ata_port_info mv_port_info[] = {
{ /* chip_504x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = MV_COMMON_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */
.port_ops = &mv_ops,
},
{ /* chip_508x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_DUAL_HC),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */
.port_ops = &mv_ops,
},
{ /* chip_604x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv_ops,
},
{ /* chip_608x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC |
- MV_FLAG_BDMA),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv_ops,
},
};
@@ -306,12 +379,6 @@
(void) readl(addr); /* flush to avoid PCI posted write */
}
-static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio)
-{
- return ((void __iomem *)((unsigned long)port_mmio &
- (unsigned long)SATAHC_MASK));
-}
-
static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
{
return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
@@ -329,26 +396,152 @@
return mv_port_base(ap->host_set->mmio_base, ap->port_no);
}
-static inline int mv_get_hc_count(unsigned long flags)
+static inline int mv_get_hc_count(unsigned long hp_flags)
{
- return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1);
-}
-
-static inline int mv_is_edma_active(struct ata_port *ap)
-{
- void __iomem *port_mmio = mv_ap_base(ap);
- return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
-}
-
-static inline int mv_port_bdma_capable(struct ata_port *ap)
-{
- return (ap->flags & MV_FLAG_BDMA);
+ return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
}
static void mv_irq_clear(struct ata_port *ap)
{
}
+/**
+ * mv_start_dma - Enable eDMA engine
+ * @base: port base address
+ * @pp: port private data
+ *
+ * Verify the local cache of the eDMA state is accurate with an
+ * assert.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
+{
+ if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
+ writelfl(EDMA_EN, base + EDMA_CMD_OFS);
+ pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
+ }
+ assert(EDMA_EN & readl(base + EDMA_CMD_OFS));
+}
+
+/**
+ * mv_stop_dma - Disable eDMA engine
+ * @ap: ATA channel to manipulate
+ *
+ * Verify the local cache of the eDMA state is accurate with an
+ * assert.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_stop_dma(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ u32 reg;
+ int i;
+
+ if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) {
+ /* Disable EDMA if active. The disable bit auto clears.
+ */
+ writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ } else {
+ assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)));
+ }
+
+ /* now properly wait for the eDMA to stop */
+ for (i = 1000; i > 0; i--) {
+ reg = readl(port_mmio + EDMA_CMD_OFS);
+ if (!(EDMA_EN & reg)) {
+ break;
+ }
+ udelay(100);
+ }
+
+ if (EDMA_EN & reg) {
+ printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id);
+ /* FIXME: Consider doing a reset here to recover */
+ }
+}
+
+#ifdef ATA_DEBUG
+static void mv_dump_mem(void __iomem *start, unsigned bytes)
+{
+ int b, w;
+ for (b = 0; b < bytes; ) {
+ DPRINTK("%p: ", start + b);
+ for (w = 0; b < bytes && w < 4; w++) {
+ printk("%08x ",readl(start + b));
+ b += sizeof(u32);
+ }
+ printk("\n");
+ }
+}
+#endif
+
+static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
+{
+#ifdef ATA_DEBUG
+ int b, w;
+ u32 dw;
+ for (b = 0; b < bytes; ) {
+ DPRINTK("%02x: ", b);
+ for (w = 0; b < bytes && w < 4; w++) {
+ (void) pci_read_config_dword(pdev,b,&dw);
+ printk("%08x ",dw);
+ b += sizeof(u32);
+ }
+ printk("\n");
+ }
+#endif
+}
+static void mv_dump_all_regs(void __iomem *mmio_base, int port,
+ struct pci_dev *pdev)
+{
+#ifdef ATA_DEBUG
+ void __iomem *hc_base = mv_hc_base(mmio_base,
+ port >> MV_PORT_HC_SHIFT);
+ void __iomem *port_base;
+ int start_port, num_ports, p, start_hc, num_hcs, hc;
+
+ if (0 > port) {
+ start_hc = start_port = 0;
+ num_ports = 8; /* shld be benign for 4 port devs */
+ num_hcs = 2;
+ } else {
+ start_hc = port >> MV_PORT_HC_SHIFT;
+ start_port = port;
+ num_ports = num_hcs = 1;
+ }
+ DPRINTK("All registers for port(s) %u-%u:\n", start_port,
+ num_ports > 1 ? num_ports - 1 : start_port);
+
+ if (NULL != pdev) {
+ DPRINTK("PCI config space regs:\n");
+ mv_dump_pci_cfg(pdev, 0x68);
+ }
+ DPRINTK("PCI regs:\n");
+ mv_dump_mem(mmio_base+0xc00, 0x3c);
+ mv_dump_mem(mmio_base+0xd00, 0x34);
+ mv_dump_mem(mmio_base+0xf00, 0x4);
+ mv_dump_mem(mmio_base+0x1d00, 0x6c);
+ for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
+ hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT);
+ DPRINTK("HC regs (HC %i):\n", hc);
+ mv_dump_mem(hc_base, 0x1c);
+ }
+ for (p = start_port; p < start_port + num_ports; p++) {
+ port_base = mv_port_base(mmio_base, p);
+ DPRINTK("EDMA regs (port %i):\n",p);
+ mv_dump_mem(port_base, 0x54);
+ DPRINTK("SATA regs (port %i):\n",p);
+ mv_dump_mem(port_base+0x300, 0x60);
+ }
+#endif
+}
+
static unsigned int mv_scr_offset(unsigned int sc_reg_in)
{
unsigned int ofs;
@@ -389,30 +582,37 @@
}
}
-static int mv_master_reset(void __iomem *mmio_base)
+/**
+ * mv_global_soft_reset - Perform the 6xxx global soft reset
+ * @mmio_base: base address of the HBA
+ *
+ * This routine only applies to 6xxx parts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_global_soft_reset(void __iomem *mmio_base)
{
void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS;
int i, rc = 0;
u32 t;
- VPRINTK("ENTER\n");
-
/* Following procedure defined in PCI "main command and status
* register" table.
*/
t = readl(reg);
writel(t | STOP_PCI_MASTER, reg);
- for (i = 0; i < 100; i++) {
- msleep(10);
+ for (i = 0; i < 1000; i++) {
+ udelay(1);
t = readl(reg);
if (PCI_MASTER_EMPTY & t) {
break;
}
}
if (!(PCI_MASTER_EMPTY & t)) {
- printk(KERN_ERR DRV_NAME "PCI master won't flush\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
+ rc = 1;
goto done;
}
@@ -425,48 +625,412 @@
} while (!(GLOB_SFT_RST & t) && (i-- > 0));
if (!(GLOB_SFT_RST & t)) {
- printk(KERN_ERR DRV_NAME "can't set global reset\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": can't set global reset\n");
+ rc = 1;
goto done;
}
- /* clear reset */
+ /* clear reset and *reenable the PCI master* (not mentioned in spec) */
i = 5;
do {
- writel(t & ~GLOB_SFT_RST, reg);
+ writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
t = readl(reg);
udelay(1);
} while ((GLOB_SFT_RST & t) && (i-- > 0));
if (GLOB_SFT_RST & t) {
- printk(KERN_ERR DRV_NAME "can't clear global reset\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
+ rc = 1;
}
-
- done:
- VPRINTK("EXIT, rc = %i\n", rc);
+done:
return rc;
}
+/**
+ * mv_host_stop - Host specific cleanup/stop routine.
+ * @host_set: host data structure
+ *
+ * Disable ints, cleanup host memory, call general purpose
+ * host_stop.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_host_stop(struct ata_host_set *host_set)
+{
+ struct mv_host_priv *hpriv = host_set->private_data;
+ struct pci_dev *pdev = to_pci_dev(host_set->dev);
+
+ if (hpriv->hp_flags & MV_HP_FLAG_MSI) {
+ pci_disable_msi(pdev);
+ } else {
+ pci_intx(pdev, 0);
+ }
+ kfree(hpriv);
+ ata_host_stop(host_set);
+}
+
+/**
+ * mv_port_start - Port specific init/start routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Allocate and point to DMA memory, init port private memory,
+ * zero indices.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct mv_port_priv *pp;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ void *mem;
+ dma_addr_t mem_dma;
+
+ pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ return -ENOMEM;
+ }
+ memset(pp, 0, sizeof(*pp));
+
+ mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
+ GFP_KERNEL);
+ if (!mem) {
+ kfree(pp);
+ return -ENOMEM;
+ }
+ memset(mem, 0, MV_PORT_PRIV_DMA_SZ);
+
+ /* First item in chunk of DMA memory:
+ * 32-slot command request table (CRQB), 32 bytes each in size
+ */
+ pp->crqb = mem;
+ pp->crqb_dma = mem_dma;
+ mem += MV_CRQB_Q_SZ;
+ mem_dma += MV_CRQB_Q_SZ;
+
+ /* Second item:
+ * 32-slot command response table (CRPB), 8 bytes each in size
+ */
+ pp->crpb = mem;
+ pp->crpb_dma = mem_dma;
+ mem += MV_CRPB_Q_SZ;
+ mem_dma += MV_CRPB_Q_SZ;
+
+ /* Third item:
+ * Table of scatter-gather descriptors (ePRD), 16 bytes each
+ */
+ pp->sg_tbl = mem;
+ pp->sg_tbl_dma = mem_dma;
+
+ writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
+ EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
+
+ writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
+ writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
+ port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
+ writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+ writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
+ port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ pp->req_producer = pp->rsp_consumer = 0;
+
+ /* Don't turn on EDMA here...do it before DMA commands only. Else
+ * we'll be unable to send non-data, PIO, etc due to restricted access
+ * to shadow regs.
+ */
+ ap->private_data = pp;
+ return 0;
+}
+
+/**
+ * mv_port_stop - Port specific cleanup/stop routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Stop DMA, cleanup port memory.
+ *
+ * LOCKING:
+ * This routine uses the host_set lock to protect the DMA stop.
+ */
+static void mv_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct mv_port_priv *pp = ap->private_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ mv_stop_dma(ap);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ ap->private_data = NULL;
+ dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma);
+ kfree(pp);
+}
+
+/**
+ * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
+ * @qc: queued command whose SG list to source from
+ *
+ * Populate the SG list and mark the last entry.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct mv_port_priv *pp = qc->ap->private_data;
+ unsigned int i;
+
+ for (i = 0; i < qc->n_elem; i++) {
+ u32 sg_len;
+ dma_addr_t addr;
+
+ addr = sg_dma_address(&qc->sg[i]);
+ sg_len = sg_dma_len(&qc->sg[i]);
+
+ pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
+ pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ assert(0 == (sg_len & ~MV_DMA_BOUNDARY));
+ pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len);
+ }
+ if (0 < qc->n_elem) {
+ pp->sg_tbl[qc->n_elem - 1].flags_size |=
+ cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+ }
+}
+
+static inline unsigned mv_inc_q_index(unsigned *index)
+{
+ *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
+ return *index;
+}
+
+static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
+{
+ *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+ (last ? CRQB_CMD_LAST : 0);
+}
+
+/**
+ * mv_qc_prep - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ u16 *cw;
+ struct ata_taskfile *tf;
+ u16 flags = 0;
+
+ if (ATA_PROT_DMA != qc->tf.protocol) {
+ return;
+ }
+
+ /* the req producer index should be the same as we remember it */
+ assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->req_producer);
+
+ /* Fill in command request block
+ */
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ flags |= CRQB_FLAG_READ;
+ }
+ assert(MV_MAX_Q_DEPTH > qc->tag);
+ flags |= qc->tag << CRQB_TAG_SHIFT;
+
+ pp->crqb[pp->req_producer].sg_addr =
+ cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ pp->crqb[pp->req_producer].sg_addr_hi =
+ cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+
+ cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+ tf = &qc->tf;
+
+ /* Sadly, the CRQB cannot accomodate all registers--there are
+ * only 11 bytes...so we must pick and choose required
+ * registers based on the command. So, we drop feature and
+ * hob_feature for [RW] DMA commands, but they are needed for
+ * NCQ. NCQ will drop hob_nsect.
+ */
+ switch (tf->command) {
+ case ATA_CMD_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
+ break;
+#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
+ case ATA_CMD_FPDMA_READ:
+ case ATA_CMD_FPDMA_WRITE:
+ mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
+ mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
+ break;
+#endif /* FIXME: remove this line when NCQ added */
+ default:
+ /* The only other commands EDMA supports in non-queued and
+ * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
+ * of which are defined/used by Linux. If we get here, this
+ * driver needs work.
+ *
+ * FIXME: modify libata to give qc_prep a return value and
+ * return error here.
+ */
+ BUG_ON(tf->command);
+ break;
+ }
+ mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0);
+ mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
+ mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP)) {
+ return;
+ }
+ mv_fill_sg(qc);
+}
+
+/**
+ * mv_qc_issue - Initiate a command to the host
+ * @qc: queued command to start
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it sanity checks our local
+ * caches of the request producer/consumer indices then enables
+ * DMA and bumps the request producer index.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_qc_issue(struct ata_queued_cmd *qc)
+{
+ void __iomem *port_mmio = mv_ap_base(qc->ap);
+ struct mv_port_priv *pp = qc->ap->private_data;
+ u32 in_ptr;
+
+ if (ATA_PROT_DMA != qc->tf.protocol) {
+ /* We're about to send a non-EDMA capable command to the
+ * port. Turn off EDMA so there won't be problems accessing
+ * shadow block, etc registers.
+ */
+ mv_stop_dma(qc->ap);
+ return ata_qc_issue_prot(qc);
+ }
+
+ in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ /* the req producer index should be the same as we remember it */
+ assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->req_producer);
+ /* until we do queuing, the queue should be empty at this point */
+ assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+
+ mv_inc_q_index(&pp->req_producer); /* now incr producer index */
+
+ mv_start_dma(port_mmio, pp);
+
+ /* and write the request in pointer to kick the EDMA to life */
+ in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
+ in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+ writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ return 0;
+}
+
+/**
+ * mv_get_crpb_status - get status from most recently completed cmd
+ * @ap: ATA channel to manipulate
+ *
+ * This routine is for use when the port is in DMA mode, when it
+ * will be using the CRPB (command response block) method of
+ * returning command completion information. We assert indices
+ * are good, grab status, and bump the response consumer index to
+ * prove that we're up to date.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 mv_get_crpb_status(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ u32 out_ptr;
+
+ out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ /* the response consumer index should be the same as we remember it */
+ assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->rsp_consumer);
+
+ /* increment our consumer index... */
+ pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+
+ /* and, until we do NCQ, there should only be 1 CRPB waiting */
+ assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
+ EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->rsp_consumer);
+
+ /* write out our inc'd consumer index so EDMA knows we're caught up */
+ out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
+ out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+ writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ /* Return ATA status register for completed CRPB */
+ return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT);
+}
+
+/**
+ * mv_err_intr - Handle error interrupts on the port
+ * @ap: ATA channel to manipulate
+ *
+ * In most cases, just clear the interrupt and move on. However,
+ * some cases require an eDMA reset, which is done right before
+ * the COMRESET in mv_phy_reset(). The SERR case requires a
+ * clear of pending errors in the SATA SERROR register. Finally,
+ * if the port disabled DMA, update our cached copy to match.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_err_intr(struct ata_port *ap)
{
- void __iomem *port_mmio;
+ void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, serr = 0;
- /* bug here b/c we got an err int on a port we don't know about,
- * so there's no way to clear it
- */
- BUG_ON(NULL == ap);
- port_mmio = mv_ap_base(ap);
-
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
if (EDMA_ERR_SERR & edma_err_cause) {
serr = scr_read(ap, SCR_ERROR);
scr_write_flush(ap, SCR_ERROR, serr);
}
- DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n",
- ap->port_no, edma_err_cause, serr);
+ if (EDMA_ERR_SELF_DIS & edma_err_cause) {
+ struct mv_port_priv *pp = ap->private_data;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ }
+ DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
+ "SERR: 0x%08x\n", ap->id, edma_err_cause, serr);
/* Clear EDMA now that SERR cleanup done */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
@@ -477,7 +1041,21 @@
}
}
-/* Handle any outstanding interrupts in a single SATAHC
+/**
+ * mv_host_intr - Handle all interrupts on the given host controller
+ * @host_set: host specific structure
+ * @relevant: port error bits relevant to this host controller
+ * @hc: which host controller we're to look at
+ *
+ * Read then write clear the HC interrupt status then walk each
+ * port connected to the HC and see if it needs servicing. Port
+ * success ints are reported in the HC interrupt status reg, the
+ * port error ints are reported in the higher level main
+ * interrupt status register and thus are passed in via the
+ * 'relevant' argument.
+ *
+ * LOCKING:
+ * Inherited from caller.
*/
static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
unsigned int hc)
@@ -487,8 +1065,9 @@
struct ata_port *ap;
struct ata_queued_cmd *qc;
u32 hc_irq_cause;
- int shift, port, port0, hard_port;
- u8 ata_status;
+ int shift, port, port0, hard_port, handled;
+ unsigned int err_mask;
+ u8 ata_status = 0;
if (hc == 0) {
port0 = 0;
@@ -499,7 +1078,7 @@
/* we'll need the HC success int register in most cases */
hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
if (hc_irq_cause) {
- writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
+ writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
}
VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
@@ -508,54 +1087,70 @@
for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
ap = host_set->ports[port];
hard_port = port & MV_PORT_MASK; /* range 0-3 */
- ata_status = 0xffU;
+ handled = 0; /* ensure ata_status is set if handled++ */
- if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) {
- BUG_ON(NULL == ap);
- /* rcv'd new resp, basic DMA complete, or ATA IRQ */
- /* This is needed to clear the ATA INTRQ.
- * FIXME: don't read the status reg in EDMA mode!
+ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
+ /* new CRPB on the queue; just one at a time until NCQ
+ */
+ ata_status = mv_get_crpb_status(ap);
+ handled++;
+ } else if ((DEV_IRQ << hard_port) & hc_irq_cause) {
+ /* received ATA IRQ; read the status reg to clear INTRQ
*/
ata_status = readb((void __iomem *)
ap->ioaddr.status_addr);
+ handled++;
}
- shift = port * 2;
+ err_mask = ac_err_mask(ata_status);
+
+ shift = port << 1; /* (port * 2) */
if (port >= MV_PORTS_PER_HC) {
shift++; /* skip bit 8 in the HC Main IRQ reg */
}
if ((PORT0_ERR << shift) & relevant) {
mv_err_intr(ap);
- /* FIXME: smart to OR in ATA_ERR? */
- ata_status = readb((void __iomem *)
- ap->ioaddr.status_addr) | ATA_ERR;
+ err_mask |= AC_ERR_OTHER;
+ handled++;
}
- if (ap) {
+ if (handled && ap) {
qc = ata_qc_from_tag(ap, ap->active_tag);
if (NULL != qc) {
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
- BUG_ON(0xffU == ata_status);
/* mark qc status appropriately */
- ata_qc_complete(qc, ata_status);
+ ata_qc_complete(qc, err_mask);
}
}
}
VPRINTK("EXIT\n");
}
+/**
+ * mv_interrupt -
+ * @irq: unused
+ * @dev_instance: private data; in this case the host structure
+ * @regs: unused
+ *
+ * Read the read only register to determine if any host
+ * controllers have pending interrupts. If so, call lower level
+ * routine to handle. Also check for PCI errors which are only
+ * reported here.
+ *
+ * LOCKING:
+ * This routine holds the host_set lock while processing pending
+ * interrupts.
+ */
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
unsigned int hc, handled = 0, n_hcs;
- void __iomem *mmio;
+ void __iomem *mmio = host_set->mmio_base;
u32 irq_stat;
- mmio = host_set->mmio_base;
irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
- n_hcs = mv_get_hc_count(host_set->ports[0]->flags);
/* check the cases where we either have nothing pending or have read
* a bogus register value which can indicate HW removal or PCI fault
@@ -564,64 +1159,89 @@
return IRQ_NONE;
}
+ n_hcs = mv_get_hc_count(host_set->ports[0]->flags);
spin_lock(&host_set->lock);
for (hc = 0; hc < n_hcs; hc++) {
u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
if (relevant) {
mv_host_intr(host_set, relevant, hc);
- handled = 1;
+ handled++;
}
}
if (PCI_ERR & irq_stat) {
- /* FIXME: these are all masked by default, but still need
- * to recover from them properly.
- */
- }
+ printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
+ readl(mmio + PCI_IRQ_CAUSE_OFS));
+ DPRINTK("All regs @ PCI error\n");
+ mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev));
+
+ writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+ handled++;
+ }
spin_unlock(&host_set->lock);
return IRQ_RETVAL(handled);
}
+/**
+ * mv_phy_reset - Perform eDMA reset followed by COMRESET
+ * @ap: ATA channel to manipulate
+ *
+ * Part of this is taken from __sata_phy_reset and modified to
+ * not sleep since this routine gets called from interrupt level.
+ *
+ * LOCKING:
+ * Inherited from caller. This is coded to safe to call at
+ * interrupt level, i.e. it does not sleep.
+ */
static void mv_phy_reset(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
struct ata_taskfile tf;
struct ata_device *dev = &ap->device[0];
- u32 edma = 0, bdma;
+ unsigned long timeout;
VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
- edma = readl(port_mmio + EDMA_CMD_OFS);
- if (EDMA_EN & edma) {
- /* disable EDMA if active */
- edma &= ~EDMA_EN;
- writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS);
- udelay(1);
- } else if (mv_port_bdma_capable(ap) &&
- (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) {
- /* disable BDMA if active */
- writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS);
- }
+ mv_stop_dma(ap);
- writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS);
+ writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
udelay(25); /* allow reset propagation */
/* Spec never mentions clearing the bit. Marvell's driver does
* clear the bit, however.
*/
- writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS);
+ writelfl(0, port_mmio + EDMA_CMD_OFS);
- VPRINTK("Done. Now calling __sata_phy_reset()\n");
+ VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
+ "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
+ mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
/* proceed to init communications via the scr_control reg */
- __sata_phy_reset(ap);
+ scr_write_flush(ap, SCR_CONTROL, 0x301);
+ mdelay(1);
+ scr_write_flush(ap, SCR_CONTROL, 0x300);
+ timeout = jiffies + (HZ * 1);
+ do {
+ mdelay(10);
+ if ((scr_read(ap, SCR_STATUS) & 0xf) != 1)
+ break;
+ } while (time_before(jiffies, timeout));
- if (ap->flags & ATA_FLAG_PORT_DISABLED) {
- VPRINTK("Port disabled pre-sig. Exiting.\n");
+ VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
+ "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
+ mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
+
+ if (sata_dev_present(ap)) {
+ ata_port_probe(ap);
+ } else {
+ printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n",
+ ap->id, scr_read(ap, SCR_STATUS));
+ ata_port_disable(ap);
return;
}
+ ap->cbl = ATA_CBL_SATA;
tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr);
tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr);
@@ -636,37 +1256,118 @@
VPRINTK("EXIT\n");
}
-static void mv_port_init(struct ata_ioports *port, unsigned long base)
+/**
+ * mv_eng_timeout - Routine called by libata when SCSI times out I/O
+ * @ap: ATA channel to manipulate
+ *
+ * Intent is to clear all pending error conditions, reset the
+ * chip/bus, fail the command, and move on.
+ *
+ * LOCKING:
+ * This routine holds the host_set lock while failing the command.
+ */
+static void mv_eng_timeout(struct ata_port *ap)
{
- /* PIO related setup */
- port->data_addr = base + SHD_PIO_DATA_OFS;
- port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS;
- port->nsect_addr = base + SHD_SECT_CNT_OFS;
- port->lbal_addr = base + SHD_LBA_L_OFS;
- port->lbam_addr = base + SHD_LBA_M_OFS;
- port->lbah_addr = base + SHD_LBA_H_OFS;
- port->device_addr = base + SHD_DEV_HD_OFS;
- port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS;
- port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS;
- /* unused */
- port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
- /* unmask all EDMA error interrupts */
- writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS);
+ printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
+ DPRINTK("All regs @ start of eng_timeout\n");
+ mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no,
+ to_pci_dev(ap->host_set->dev));
- VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
- readl((void __iomem *)base + EDMA_CFG_OFS),
- readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS),
- readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS));
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
+ ap->host_set->mmio_base, ap, qc, qc->scsicmd,
+ &qc->scsicmd->cmnd);
+
+ mv_err_intr(ap);
+ mv_phy_reset(ap);
+
+ if (!qc) {
+ printk(KERN_ERR "ata%u: BUG: timeout without command\n",
+ ap->id);
+ } else {
+ /* hack alert! We cannot use the supplied completion
+ * function from inside the ->eh_strategy_handler() thread.
+ * libata is the only user of ->eh_strategy_handler() in
+ * any kernel, so the default scsi_done() assumes it is
+ * not being called from the SCSI EH.
+ */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc->scsidone = scsi_finish_command;
+ ata_qc_complete(qc, AC_ERR_OTHER);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+ }
}
+/**
+ * mv_port_init - Perform some early initialization on a single port.
+ * @port: libata data structure storing shadow register addresses
+ * @port_mmio: base address of the port
+ *
+ * Initialize shadow register mmio addresses, clear outstanding
+ * interrupts on the port, and unmask interrupts for the future
+ * start of the port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
+{
+ unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS;
+ unsigned serr_ofs;
+
+ /* PIO related setup
+ */
+ port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
+ port->error_addr =
+ port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
+ port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
+ port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
+ port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
+ port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
+ port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
+ port->status_addr =
+ port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
+ /* special case: control/altstatus doesn't have ATA_REG_ address */
+ port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
+
+ /* unused: */
+ port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
+
+ /* Clear any currently outstanding port interrupt conditions */
+ serr_ofs = mv_scr_offset(SCR_ERROR);
+ writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ /* unmask all EDMA error interrupts */
+ writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
+
+ VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
+ readl(port_mmio + EDMA_CFG_OFS),
+ readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
+ readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
+}
+
+/**
+ * mv_host_init - Perform some early initialization of the host.
+ * @probe_ent: early data struct representing the host
+ *
+ * If possible, do an early global reset of the host. Then do
+ * our port init and clear/unmask all/relevant host interrupts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_host_init(struct ata_probe_ent *probe_ent)
{
int rc = 0, n_hc, port, hc;
void __iomem *mmio = probe_ent->mmio_base;
void __iomem *port_mmio;
- if (mv_master_reset(probe_ent->mmio_base)) {
+ if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) &&
+ mv_global_soft_reset(probe_ent->mmio_base)) {
rc = 1;
goto done;
}
@@ -676,17 +1377,27 @@
for (port = 0; port < probe_ent->n_ports; port++) {
port_mmio = mv_port_base(mmio, port);
- mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio);
+ mv_port_init(&probe_ent->port[port], port_mmio);
}
for (hc = 0; hc < n_hc; hc++) {
- VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc,
- readl(mv_hc_base(mmio, hc) + HC_CFG_OFS),
- readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS));
+ void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+
+ VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
+ "(before clear)=0x%08x\n", hc,
+ readl(hc_mmio + HC_CFG_OFS),
+ readl(hc_mmio + HC_IRQ_CAUSE_OFS));
+
+ /* Clear any currently outstanding hc interrupt conditions */
+ writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
- writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
+ /* Clear any currently outstanding host interrupt conditions */
+ writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+
+ /* and unmask interrupt generation for host regs */
+ writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
+ writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
"PCI int cause/mask=0x%08x/0x%08x\n",
@@ -694,11 +1405,53 @@
readl(mmio + HC_MAIN_IRQ_MASK_OFS),
readl(mmio + PCI_IRQ_CAUSE_OFS),
readl(mmio + PCI_IRQ_MASK_OFS));
-
- done:
+done:
return rc;
}
+/**
+ * mv_print_info - Dump key info to kernel log for perusal.
+ * @probe_ent: early data struct representing the host
+ *
+ * FIXME: complete this.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_print_info(struct ata_probe_ent *probe_ent)
+{
+ struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ struct mv_host_priv *hpriv = probe_ent->private_data;
+ u8 rev_id, scc;
+ const char *scc_s;
+
+ /* Use this to determine the HW stepping of the chip so we know
+ * what errata to workaround
+ */
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+
+ pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
+ if (scc == 0)
+ scc_s = "SCSI";
+ else if (scc == 0x01)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "%u slots %u ports %s mode IRQ via %s\n",
+ (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
+ scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
+}
+
+/**
+ * mv_init_one - handle a positive probe of a Marvell host
+ * @pdev: PCI device found
+ * @ent: PCI device ID entry for the matched host
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
@@ -706,15 +1459,10 @@
struct mv_host_priv *hpriv;
unsigned int board_idx = (unsigned int)ent->driver_data;
void __iomem *mmio_base;
- int pci_dev_busy = 0;
- int rc;
+ int pci_dev_busy = 0, rc;
- if (!printed_version++) {
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
- }
-
- VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc) {
@@ -727,8 +1475,6 @@
goto err_out;
}
- pci_intx(pdev, 1);
-
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
@@ -739,8 +1485,7 @@
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
- mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR),
- pci_resource_len(pdev, MV_PRIMARY_BAR));
+ mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0);
if (mmio_base == NULL) {
rc = -ENOMEM;
goto err_out_free_ent;
@@ -769,37 +1514,40 @@
if (rc) {
goto err_out_hpriv;
}
-/* mv_print_info(probe_ent); */
- {
- int b, w;
- u32 dw[4]; /* hold a line of 16b */
- VPRINTK("PCI config space:\n");
- for (b = 0; b < 0x40; ) {
- for (w = 0; w < 4; w++) {
- (void) pci_read_config_dword(pdev,b,&dw[w]);
- b += sizeof(*dw);
- }
- VPRINTK("%08x %08x %08x %08x\n",
- dw[0],dw[1],dw[2],dw[3]);
- }
+ /* Enable interrupts */
+ if (pci_enable_msi(pdev) == 0) {
+ hpriv->hp_flags |= MV_HP_FLAG_MSI;
+ } else {
+ pci_intx(pdev, 1);
}
- /* FIXME: check ata_device_add return value */
- ata_device_add(probe_ent);
- kfree(probe_ent);
+ mv_dump_pci_cfg(pdev, 0x68);
+ mv_print_info(probe_ent);
+ if (ata_device_add(probe_ent) == 0) {
+ rc = -ENODEV; /* No devices discovered */
+ goto err_out_dev_add;
+ }
+
+ kfree(probe_ent);
return 0;
- err_out_hpriv:
+err_out_dev_add:
+ if (MV_HP_FLAG_MSI & hpriv->hp_flags) {
+ pci_disable_msi(pdev);
+ } else {
+ pci_intx(pdev, 0);
+ }
+err_out_hpriv:
kfree(hpriv);
- err_out_iounmap:
- iounmap(mmio_base);
- err_out_free_ent:
+err_out_iounmap:
+ pci_iounmap(pdev, mmio_base);
+err_out_free_ent:
kfree(probe_ent);
- err_out_regions:
+err_out_regions:
pci_release_regions(pdev);
- err_out:
+err_out:
if (!pci_dev_busy) {
pci_disable_device(pdev);
}
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index cb832b0..d573888 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -61,6 +61,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -238,7 +239,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations nv_ops = {
+static const struct ata_port_operations nv_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -331,7 +332,7 @@
return 0xffffffffU;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));
+ return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
else
return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -345,7 +346,7 @@
return;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));
+ writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
else
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -383,7 +384,7 @@
return -ENODEV;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
@@ -405,7 +406,7 @@
rc = -ENOMEM;
ppi = &nv_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
goto err_out_regions;
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 538ad72..b41c977 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -38,6 +38,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -87,8 +88,8 @@
static void pdc_pata_phy_reset(struct ata_port *ap);
static void pdc_sata_phy_reset(struct ata_port *ap);
static void pdc_qc_prep(struct ata_queued_cmd *qc);
-static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
-static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
+static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
+static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
static void pdc_irq_clear(struct ata_port *ap);
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
@@ -113,7 +114,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations pdc_sata_ops = {
+static const struct ata_port_operations pdc_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
@@ -136,7 +137,7 @@
.host_stop = ata_pci_host_stop,
};
-static struct ata_port_operations pdc_pata_ops = {
+static const struct ata_port_operations pdc_pata_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
@@ -195,6 +196,8 @@
static struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -207,6 +210,8 @@
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
@@ -324,7 +329,7 @@
{
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
- return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -333,7 +338,7 @@
{
if (sc_reg > SCR_CONTROL)
return;
- writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void pdc_qc_prep(struct ata_queued_cmd *qc)
@@ -395,7 +400,8 @@
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
- ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
+ drv_stat = ata_wait_idle(ap);
+ ata_qc_complete(qc, __ac_err_mask(drv_stat));
break;
default:
@@ -404,7 +410,7 @@
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
ap->id, qc->tf.command, drv_stat);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, ac_err_mask(drv_stat));
break;
}
@@ -416,33 +422,30 @@
static inline unsigned int pdc_host_intr( struct ata_port *ap,
struct ata_queued_cmd *qc)
{
- u8 status;
- unsigned int handled = 0, have_err = 0;
+ unsigned int handled = 0, err_mask = 0;
u32 tmp;
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL;
tmp = readl(mmio);
if (tmp & PDC_ERR_MASK) {
- have_err = 1;
+ err_mask = AC_ERR_DEV;
pdc_reset_port(ap);
}
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
- status = ata_wait_idle(ap);
- if (have_err)
- status |= ATA_ERR;
- ata_qc_complete(qc, status);
+ err_mask |= ac_err_mask(ata_wait_idle(ap));
+ ata_qc_complete(qc, err_mask);
handled = 1;
break;
default:
- ap->stats.idle_irq++;
- break;
+ ap->stats.idle_irq++;
+ break;
}
- return handled;
+ return handled;
}
static void pdc_irq_clear(struct ata_port *ap)
@@ -523,8 +526,8 @@
pp->pkt[2] = seq;
wmb(); /* flush PRD, pkt writes */
- writel(pp->pkt_dma, (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
- readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
+ writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
}
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
@@ -546,7 +549,7 @@
return ata_qc_issue_prot(qc);
}
-static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON (tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
@@ -554,7 +557,7 @@
}
-static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON (tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
@@ -631,7 +634,7 @@
int rc;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index ffcdeb6..9938dae 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <asm/io.h>
@@ -51,8 +52,6 @@
QS_PRD_BYTES = QS_MAX_PRD * 16,
QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES,
- QS_DMA_BOUNDARY = ~0UL,
-
/* global register offsets */
QS_HCF_CNFG3 = 0x0003, /* host configuration offset */
QS_HID_HPHY = 0x0004, /* host physical interface info */
@@ -101,6 +100,10 @@
board_2068_idx = 0, /* QStor 4-port SATA/RAID */
};
+enum {
+ QS_DMA_BOUNDARY = ~0UL
+};
+
typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
struct qs_port_priv {
@@ -145,7 +148,7 @@
.bios_param = ata_std_bios_param,
};
-static struct ata_port_operations qs_ata_ops = {
+static const struct ata_port_operations qs_ata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -398,11 +401,12 @@
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
switch (sHST) {
- case 0: /* sucessful CPB */
+ case 0: /* successful CPB */
case 3: /* device error */
pp->state = qs_state_idle;
qs_enter_reg_mode(qc->ap);
- ata_qc_complete(qc, sDST);
+ ata_qc_complete(qc,
+ ac_err_mask(sDST));
break;
default:
break;
@@ -431,7 +435,7 @@
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
/* check main status, clearing INTRQ */
- u8 status = ata_chk_status(ap);
+ u8 status = ata_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
@@ -439,7 +443,7 @@
/* complete taskfile transaction */
pp->state = qs_state_idle;
- ata_qc_complete(qc, status);
+ ata_qc_complete(qc, ac_err_mask(status));
handled = 1;
}
}
@@ -597,25 +601,22 @@
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME
- "(%s): 64-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME
- "(%s): 32-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME
- "(%s): 32-bit consistent DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
return rc;
}
}
@@ -632,7 +633,7 @@
int rc, port_no;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index ba98a17..435f7e0 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -41,6 +41,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -150,7 +151,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations sil_ops = {
+static const struct ata_port_operations sil_ops = {
.port_disable = ata_port_disable,
.dev_config = sil_dev_config,
.tf_load = ata_tf_load,
@@ -289,7 +290,7 @@
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
- void *mmio = (void *) sil_scr_addr(ap, sc_reg);
+ void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
if (mmio)
return readl(mmio);
return 0xffffffffU;
@@ -297,7 +298,7 @@
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
- void *mmio = (void *) sil_scr_addr(ap, sc_reg);
+ void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
if (mmio)
writel(val, mmio);
}
@@ -386,7 +387,7 @@
u8 cls;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
@@ -463,8 +464,8 @@
writeb(cls, mmio_base + SIL_FIFO_W3);
}
} else
- printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n",
- pci_name(pdev));
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "cache line size not set. Driver may not function\n");
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
new file mode 100644
index 0000000..c665480
--- /dev/null
+++ b/drivers/scsi/sata_sil24.c
@@ -0,0 +1,871 @@
+/*
+ * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
+ *
+ * Copyright 2005 Tejun Heo
+ *
+ * Based on preview driver from Silicon Image.
+ *
+ * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support
+ * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
+ * those work. Enabling those shouldn't be difficult. Basic
+ * structure is all there (in libata-dev tree). If you have any
+ * information about this hardware, please contact me or linux-ide.
+ * Info is needed on...
+ *
+ * - How to issue tagged commands and turn on sactive on issue accordingly.
+ * - Where to put an ATAPI command and how to tell the device to send it.
+ * - How to enable/use 64bit.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include "scsi.h"
+#include <linux/libata.h>
+#include <asm/io.h>
+
+#define DRV_NAME "sata_sil24"
+#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */
+
+/*
+ * Port request block (PRB) 32 bytes
+ */
+struct sil24_prb {
+ u16 ctrl;
+ u16 prot;
+ u32 rx_cnt;
+ u8 fis[6 * 4];
+};
+
+/*
+ * Scatter gather entry (SGE) 16 bytes
+ */
+struct sil24_sge {
+ u64 addr;
+ u32 cnt;
+ u32 flags;
+};
+
+/*
+ * Port multiplier
+ */
+struct sil24_port_multiplier {
+ u32 diag;
+ u32 sactive;
+};
+
+enum {
+ /*
+ * Global controller registers (128 bytes @ BAR0)
+ */
+ /* 32 bit regs */
+ HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
+ HOST_CTRL = 0x40,
+ HOST_IRQ_STAT = 0x44,
+ HOST_PHY_CFG = 0x48,
+ HOST_BIST_CTRL = 0x50,
+ HOST_BIST_PTRN = 0x54,
+ HOST_BIST_STAT = 0x58,
+ HOST_MEM_BIST_STAT = 0x5c,
+ HOST_FLASH_CMD = 0x70,
+ /* 8 bit regs */
+ HOST_FLASH_DATA = 0x74,
+ HOST_TRANSITION_DETECT = 0x75,
+ HOST_GPIO_CTRL = 0x76,
+ HOST_I2C_ADDR = 0x78, /* 32 bit */
+ HOST_I2C_DATA = 0x7c,
+ HOST_I2C_XFER_CNT = 0x7e,
+ HOST_I2C_CTRL = 0x7f,
+
+ /* HOST_SLOT_STAT bits */
+ HOST_SSTAT_ATTN = (1 << 31),
+
+ /*
+ * Port registers
+ * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
+ */
+ PORT_REGS_SIZE = 0x2000,
+ PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */
+
+ PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
+ /* 32 bit regs */
+ PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
+ PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
+ PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
+ PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
+ PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
+ PORT_ACTIVATE_UPPER_ADDR= 0x101c,
+ PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
+ PORT_CMD_ERR = 0x1024, /* command error number */
+ PORT_FIS_CFG = 0x1028,
+ PORT_FIFO_THRES = 0x102c,
+ /* 16 bit regs */
+ PORT_DECODE_ERR_CNT = 0x1040,
+ PORT_DECODE_ERR_THRESH = 0x1042,
+ PORT_CRC_ERR_CNT = 0x1044,
+ PORT_CRC_ERR_THRESH = 0x1046,
+ PORT_HSHK_ERR_CNT = 0x1048,
+ PORT_HSHK_ERR_THRESH = 0x104a,
+ /* 32 bit regs */
+ PORT_PHY_CFG = 0x1050,
+ PORT_SLOT_STAT = 0x1800,
+ PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
+ PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
+ PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
+ PORT_SCONTROL = 0x1f00,
+ PORT_SSTATUS = 0x1f04,
+ PORT_SERROR = 0x1f08,
+ PORT_SACTIVE = 0x1f0c,
+
+ /* PORT_CTRL_STAT bits */
+ PORT_CS_PORT_RST = (1 << 0), /* port reset */
+ PORT_CS_DEV_RST = (1 << 1), /* device reset */
+ PORT_CS_INIT = (1 << 2), /* port initialize */
+ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
+ PORT_CS_RESUME = (1 << 6), /* port resume */
+ PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
+ PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
+ PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
+
+ /* PORT_IRQ_STAT/ENABLE_SET/CLR */
+ /* bits[11:0] are masked */
+ PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
+ PORT_IRQ_ERROR = (1 << 1), /* command execution error */
+ PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
+ PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
+ PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
+ PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
+ PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */
+ PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */
+
+ /* bits[27:16] are unmasked (raw) */
+ PORT_IRQ_RAW_SHIFT = 16,
+ PORT_IRQ_MASKED_MASK = 0x7ff,
+ PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
+
+ /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
+ PORT_IRQ_STEER_SHIFT = 30,
+ PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
+
+ /* PORT_CMD_ERR constants */
+ PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
+ PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
+ PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
+ PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
+ PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
+ PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
+ PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
+ PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
+ PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
+ PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
+ PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
+ PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
+ PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
+ PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
+ PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
+ PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
+ PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
+ PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
+ PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
+ PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */
+ PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
+ PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
+
+ /*
+ * Other constants
+ */
+ SGE_TRM = (1 << 31), /* Last SGE in chain */
+ PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */
+
+ /* board id */
+ BID_SIL3124 = 0,
+ BID_SIL3132 = 1,
+ BID_SIL3131 = 2,
+
+ IRQ_STAT_4PORTS = 0xf,
+};
+
+struct sil24_cmd_block {
+ struct sil24_prb prb;
+ struct sil24_sge sge[LIBATA_MAX_PRD];
+};
+
+/*
+ * ap->private_data
+ *
+ * The preview driver always returned 0 for status. We emulate it
+ * here from the previous interrupt.
+ */
+struct sil24_port_priv {
+ struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */
+ dma_addr_t cmd_block_dma; /* DMA base addr for them */
+ struct ata_taskfile tf; /* Cached taskfile registers */
+};
+
+/* ap->host_set->private_data */
+struct sil24_host_priv {
+ void __iomem *host_base; /* global controller control (128 bytes @BAR0) */
+ void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
+};
+
+static u8 sil24_check_status(struct ata_port *ap);
+static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
+static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
+static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+static void sil24_phy_reset(struct ata_port *ap);
+static void sil24_qc_prep(struct ata_queued_cmd *qc);
+static int sil24_qc_issue(struct ata_queued_cmd *qc);
+static void sil24_irq_clear(struct ata_port *ap);
+static void sil24_eng_timeout(struct ata_port *ap);
+static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int sil24_port_start(struct ata_port *ap);
+static void sil24_port_stop(struct ata_port *ap);
+static void sil24_host_stop(struct ata_host_set *host_set);
+static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+
+static struct pci_device_id sil24_pci_tbl[] = {
+ { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
+ { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
+ { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
+ { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
+ { } /* terminate list */
+};
+
+static struct pci_driver sil24_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sil24_pci_tbl,
+ .probe = sil24_init_one,
+ .remove = ata_pci_remove_one, /* safe? */
+};
+
+static Scsi_Host_Template sil24_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+ .ordered_flush = 1, /* NCQ not supported yet */
+};
+
+static const struct ata_port_operations sil24_ops = {
+ .port_disable = ata_port_disable,
+
+ .check_status = sil24_check_status,
+ .check_altstatus = sil24_check_status,
+ .dev_select = ata_noop_dev_select,
+
+ .tf_read = sil24_tf_read,
+
+ .phy_reset = sil24_phy_reset,
+
+ .qc_prep = sil24_qc_prep,
+ .qc_issue = sil24_qc_issue,
+
+ .eng_timeout = sil24_eng_timeout,
+
+ .irq_handler = sil24_interrupt,
+ .irq_clear = sil24_irq_clear,
+
+ .scr_read = sil24_scr_read,
+ .scr_write = sil24_scr_write,
+
+ .port_start = sil24_port_start,
+ .port_stop = sil24_port_stop,
+ .host_stop = sil24_host_stop,
+};
+
+/*
+ * Use bits 30-31 of host_flags to encode available port numbers.
+ * Current maxium is 4.
+ */
+#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
+#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
+
+static struct ata_port_info sil24_port_info[] = {
+ /* sil_3124 */
+ {
+ .sht = &sil24_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil24_ops,
+ },
+ /* sil_3132 */
+ {
+ .sht = &sil24_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil24_ops,
+ },
+ /* sil_3131/sil_3531 */
+ {
+ .sht = &sil24_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil24_ops,
+ },
+};
+
+static inline void sil24_update_tf(struct ata_port *ap)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ struct sil24_prb __iomem *prb = port;
+ u8 fis[6 * 4];
+
+ memcpy_fromio(fis, prb->fis, 6 * 4);
+ ata_tf_from_fis(fis, &pp->tf);
+}
+
+static u8 sil24_check_status(struct ata_port *ap)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+ return pp->tf.command;
+}
+
+static int sil24_scr_map[] = {
+ [SCR_CONTROL] = 0,
+ [SCR_STATUS] = 1,
+ [SCR_ERROR] = 2,
+ [SCR_ACTIVE] = 3,
+};
+
+static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
+{
+ void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+ if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
+ void __iomem *addr;
+ addr = scr_addr + sil24_scr_map[sc_reg] * 4;
+ return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
+ }
+ return 0xffffffffU;
+}
+
+static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
+{
+ void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+ if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
+ void __iomem *addr;
+ addr = scr_addr + sil24_scr_map[sc_reg] * 4;
+ writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
+ }
+}
+
+static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+ *tf = pp->tf;
+}
+
+static void sil24_phy_reset(struct ata_port *ap)
+{
+ __sata_phy_reset(ap);
+ /*
+ * No ATAPI yet. Just unconditionally indicate ATA device.
+ * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
+ * and libata core will ignore the device.
+ */
+ if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
+ ap->device[0].class = ATA_DEV_ATA;
+}
+
+static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
+ struct sil24_cmd_block *cb)
+{
+ struct scatterlist *sg = qc->sg;
+ struct sil24_sge *sge = cb->sge;
+ unsigned i;
+
+ for (i = 0; i < qc->n_elem; i++, sg++, sge++) {
+ sge->addr = cpu_to_le64(sg_dma_address(sg));
+ sge->cnt = cpu_to_le32(sg_dma_len(sg));
+ sge->flags = 0;
+ sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM);
+ }
+}
+
+static void sil24_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct sil24_port_priv *pp = ap->private_data;
+ struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+ struct sil24_prb *prb = &cb->prb;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_PIO:
+ case ATA_PROT_DMA:
+ case ATA_PROT_NODATA:
+ break;
+ default:
+ /* ATAPI isn't supported yet */
+ BUG();
+ }
+
+ ata_tf_to_fis(&qc->tf, prb->fis, 0);
+
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ sil24_fill_sg(qc, cb);
+}
+
+static int sil24_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ struct sil24_port_priv *pp = ap->private_data;
+ dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
+
+ writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+ return 0;
+}
+
+static void sil24_irq_clear(struct ata_port *ap)
+{
+ /* unused */
+}
+
+static int __sil24_reset_controller(void __iomem *port)
+{
+ int cnt;
+ u32 tmp;
+
+ /* Reset controller state. Is this correct? */
+ writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
+ readl(port + PORT_CTRL_STAT); /* sync */
+
+ /* Max ~100ms */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ udelay(100);
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (!(tmp & PORT_CS_DEV_RST))
+ break;
+ }
+
+ if (tmp & PORT_CS_DEV_RST)
+ return -1;
+ return 0;
+}
+
+static void sil24_reset_controller(struct ata_port *ap)
+{
+ printk(KERN_NOTICE DRV_NAME
+ " ata%u: resetting controller...\n", ap->id);
+ if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr))
+ printk(KERN_ERR DRV_NAME
+ " ata%u: failed to reset controller\n", ap->id);
+}
+
+static void sil24_eng_timeout(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (!qc) {
+ printk(KERN_ERR "ata%u: BUG: timeout without command\n",
+ ap->id);
+ return;
+ }
+
+ /*
+ * hack alert! We cannot use the supplied completion
+ * function from inside the ->eh_strategy_handler() thread.
+ * libata is the only user of ->eh_strategy_handler() in
+ * any kernel, so the default scsi_done() assumes it is
+ * not being called from the SCSI EH.
+ */
+ printk(KERN_ERR "ata%u: command timeout\n", ap->id);
+ qc->scsidone = scsi_finish_command;
+ ata_qc_complete(qc, AC_ERR_OTHER);
+
+ sil24_reset_controller(ap);
+}
+
+static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
+{
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+ struct sil24_port_priv *pp = ap->private_data;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ u32 irq_stat, cmd_err, sstatus, serror;
+ unsigned int err_mask;
+
+ irq_stat = readl(port + PORT_IRQ_STAT);
+ writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
+
+ if (!(irq_stat & PORT_IRQ_ERROR)) {
+ /* ignore non-completion, non-error irqs for now */
+ printk(KERN_WARNING DRV_NAME
+ "ata%u: non-error exception irq (irq_stat %x)\n",
+ ap->id, irq_stat);
+ return;
+ }
+
+ cmd_err = readl(port + PORT_CMD_ERR);
+ sstatus = readl(port + PORT_SSTATUS);
+ serror = readl(port + PORT_SERROR);
+ if (serror)
+ writel(serror, port + PORT_SERROR);
+
+ printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
+ " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+ ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+
+ if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
+ /*
+ * Device is reporting error, tf registers are valid.
+ */
+ sil24_update_tf(ap);
+ err_mask = ac_err_mask(pp->tf.command);
+ } else {
+ /*
+ * Other errors. libata currently doesn't have any
+ * mechanism to report these errors. Just turn on
+ * ATA_ERR.
+ */
+ err_mask = AC_ERR_OTHER;
+ }
+
+ if (qc)
+ ata_qc_complete(qc, err_mask);
+
+ sil24_reset_controller(ap);
+}
+
+static inline void sil24_host_intr(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ u32 slot_stat;
+
+ slot_stat = readl(port + PORT_SLOT_STAT);
+ if (!(slot_stat & HOST_SSTAT_ATTN)) {
+ struct sil24_port_priv *pp = ap->private_data;
+ /*
+ * !HOST_SSAT_ATTN guarantees successful completion,
+ * so reading back tf registers is unnecessary for
+ * most commands. TODO: read tf registers for
+ * commands which require these values on successful
+ * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER,
+ * DEVICE RESET and READ PORT MULTIPLIER (any more?).
+ */
+ sil24_update_tf(ap);
+
+ if (qc)
+ ata_qc_complete(qc, ac_err_mask(pp->tf.command));
+ } else
+ sil24_error_intr(ap, slot_stat);
+}
+
+static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ struct sil24_host_priv *hpriv = host_set->private_data;
+ unsigned handled = 0;
+ u32 status;
+ int i;
+
+ status = readl(hpriv->host_base + HOST_IRQ_STAT);
+
+ if (status == 0xffffffff) {
+ printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
+ "PCI fault or device removal?\n");
+ goto out;
+ }
+
+ if (!(status & IRQ_STAT_4PORTS))
+ goto out;
+
+ spin_lock(&host_set->lock);
+
+ for (i = 0; i < host_set->n_ports; i++)
+ if (status & (1 << i)) {
+ struct ata_port *ap = host_set->ports[i];
+ if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) {
+ sil24_host_intr(host_set->ports[i]);
+ handled++;
+ } else
+ printk(KERN_ERR DRV_NAME
+ ": interrupt from disabled port %d\n", i);
+ }
+
+ spin_unlock(&host_set->lock);
+ out:
+ return IRQ_RETVAL(handled);
+}
+
+static int sil24_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct sil24_port_priv *pp;
+ struct sil24_cmd_block *cb;
+ size_t cb_size = sizeof(*cb);
+ dma_addr_t cb_dma;
+
+ pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+ memset(pp, 0, sizeof(*pp));
+
+ pp->tf.command = ATA_DRDY;
+
+ cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
+ if (!cb) {
+ kfree(pp);
+ return -ENOMEM;
+ }
+ memset(cb, 0, cb_size);
+
+ pp->cmd_block = cb;
+ pp->cmd_block_dma = cb_dma;
+
+ ap->private_data = pp;
+
+ return 0;
+}
+
+static void sil24_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct sil24_port_priv *pp = ap->private_data;
+ size_t cb_size = sizeof(*pp->cmd_block);
+
+ dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
+ kfree(pp);
+}
+
+static void sil24_host_stop(struct ata_host_set *host_set)
+{
+ struct sil24_host_priv *hpriv = host_set->private_data;
+
+ iounmap(hpriv->host_base);
+ iounmap(hpriv->port_base);
+ kfree(hpriv);
+}
+
+static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version = 0;
+ unsigned int board_id = (unsigned int)ent->driver_data;
+ struct ata_port_info *pinfo = &sil24_port_info[board_id];
+ struct ata_probe_ent *probe_ent = NULL;
+ struct sil24_host_priv *hpriv = NULL;
+ void __iomem *host_base = NULL;
+ void __iomem *port_base = NULL;
+ int i, rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto out_disable;
+
+ rc = -ENOMEM;
+ /* ioremap mmio registers */
+ host_base = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!host_base)
+ goto out_free;
+ port_base = ioremap(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ if (!port_base)
+ goto out_free;
+
+ /* allocate & init probe_ent and hpriv */
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (!probe_ent)
+ goto out_free;
+
+ hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ goto out_free;
+
+ memset(probe_ent, 0, sizeof(*probe_ent));
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = pinfo->sht;
+ probe_ent->host_flags = pinfo->host_flags;
+ probe_ent->pio_mask = pinfo->pio_mask;
+ probe_ent->udma_mask = pinfo->udma_mask;
+ probe_ent->port_ops = pinfo->port_ops;
+ probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags);
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->mmio_base = port_base;
+ probe_ent->private_data = hpriv;
+
+ memset(hpriv, 0, sizeof(*hpriv));
+ hpriv->host_base = host_base;
+ hpriv->port_base = port_base;
+
+ /*
+ * Configure the device
+ */
+ /*
+ * FIXME: This device is certainly 64-bit capable. We just
+ * don't know how to use it. After fixing 32bit activation in
+ * this function, enable 64bit masks here.
+ */
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ goto out_free;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ goto out_free;
+ }
+
+ /* GPIO off */
+ writel(0, host_base + HOST_FLASH_CMD);
+
+ /* Mask interrupts during initialization */
+ writel(0, host_base + HOST_CTRL);
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ void __iomem *port = port_base + i * PORT_REGS_SIZE;
+ unsigned long portu = (unsigned long)port;
+ u32 tmp;
+ int cnt;
+
+ probe_ent->port[i].cmd_addr = portu + PORT_PRB;
+ probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
+
+ ata_std_ports(&probe_ent->port[i]);
+
+ /* Initial PHY setting */
+ writel(0x20c, port + PORT_PHY_CFG);
+
+ /* Clear port RST */
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (tmp & PORT_CS_PORT_RST) {
+ writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
+ readl(port + PORT_CTRL_STAT); /* sync */
+ for (cnt = 0; cnt < 10; cnt++) {
+ msleep(10);
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (!(tmp & PORT_CS_PORT_RST))
+ break;
+ }
+ if (tmp & PORT_CS_PORT_RST)
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to clear port RST\n");
+ }
+
+ /* Zero error counters. */
+ writel(0x8000, port + PORT_DECODE_ERR_THRESH);
+ writel(0x8000, port + PORT_CRC_ERR_THRESH);
+ writel(0x8000, port + PORT_HSHK_ERR_THRESH);
+ writel(0x0000, port + PORT_DECODE_ERR_CNT);
+ writel(0x0000, port + PORT_CRC_ERR_CNT);
+ writel(0x0000, port + PORT_HSHK_ERR_CNT);
+
+ /* FIXME: 32bit activation? */
+ writel(0, port + PORT_ACTIVATE_UPPER_ADDR);
+ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT);
+
+ /* Configure interrupts */
+ writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
+ writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS,
+ port + PORT_IRQ_ENABLE_SET);
+
+ /* Clear interrupts */
+ writel(0x0fff0fff, port + PORT_IRQ_STAT);
+ writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
+ /* Clear port multiplier enable and resume bits */
+ writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
+
+ /* Reset itself */
+ if (__sil24_reset_controller(port))
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to reset controller\n");
+ }
+
+ /* Turn on interrupts */
+ writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
+
+ pci_set_master(pdev);
+
+ /* FIXME: check ata_device_add return value */
+ ata_device_add(probe_ent);
+
+ kfree(probe_ent);
+ return 0;
+
+ out_free:
+ if (host_base)
+ iounmap(host_base);
+ if (port_base)
+ iounmap(port_base);
+ kfree(probe_ent);
+ kfree(hpriv);
+ pci_release_regions(pdev);
+ out_disable:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static int __init sil24_init(void)
+{
+ return pci_module_init(&sil24_pci_driver);
+}
+
+static void __exit sil24_exit(void)
+{
+ pci_unregister_driver(&sil24_pci_driver);
+}
+
+MODULE_AUTHOR("Tejun Heo");
+MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
+
+module_init(sil24_init);
+module_exit(sil24_exit);
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index b227e51..42288be 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -38,6 +38,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -102,7 +103,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations sis_ops = {
+static const struct ata_port_operations sis_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -237,6 +238,7 @@
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
int rc;
u32 genctl;
@@ -245,6 +247,9 @@
u8 pmr;
u8 port2_start;
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
rc = pci_enable_device(pdev);
if (rc)
return rc;
@@ -263,7 +268,7 @@
goto err_out_regions;
ppi = &sis_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent) {
rc = -ENOMEM;
goto err_out_regions;
@@ -288,16 +293,18 @@
pci_read_config_byte(pdev, SIS_PMR, &pmr);
if (ent->device != 0x182) {
if ((pmr & SIS_PMR_COMBINED) == 0) {
- printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 180/181 chipset in SATA mode\n");
port2_start = 64;
}
else {
- printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 180/181 chipset in combined mode\n");
port2_start=0;
}
}
else {
- printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n");
+ dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n");
port2_start = 0x20;
}
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index d89d968..db615ff 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -44,6 +44,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -84,6 +85,8 @@
/* Port stride */
#define K2_SATA_PORT_OFFSET 0x100
+static u8 k2_stat_check_status(struct ata_port *ap);
+
static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
@@ -102,7 +105,7 @@
}
-static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -136,16 +139,24 @@
static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah;
+ u16 nsect, lbal, lbam, lbah, feature;
- nsect = tf->nsect = readw(ioaddr->nsect_addr);
- lbal = tf->lbal = readw(ioaddr->lbal_addr);
- lbam = tf->lbam = readw(ioaddr->lbam_addr);
- lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->command = k2_stat_check_status(ap);
tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = readw(ioaddr->error_addr) >> 8;
+ tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
@@ -297,7 +308,7 @@
};
-static struct ata_port_operations k2_sata_ops = {
+static const struct ata_port_operations k2_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = k2_sata_tf_load,
.tf_read = k2_sata_tf_read,
@@ -352,7 +363,7 @@
int i;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 540a851..0ec21e09 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -38,6 +38,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -137,7 +138,7 @@
};
struct pdc_host_priv {
- void *dimm_mmio;
+ void __iomem *dimm_mmio;
unsigned int doing_hdma;
unsigned int hdma_prod;
@@ -157,8 +158,8 @@
static int pdc_port_start(struct ata_port *ap);
static void pdc_port_stop(struct ata_port *ap);
static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
-static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
-static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
+static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
+static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
static void pdc20621_host_stop(struct ata_host_set *host_set);
static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe);
static int pdc20621_detect_dimm(struct ata_probe_ent *pe);
@@ -196,7 +197,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations pdc_20621_ops = {
+static const struct ata_port_operations pdc_20621_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
@@ -247,7 +248,7 @@
{
struct pci_dev *pdev = to_pci_dev(host_set->dev);
struct pdc_host_priv *hpriv = host_set->private_data;
- void *dimm_mmio = hpriv->dimm_mmio;
+ void __iomem *dimm_mmio = hpriv->dimm_mmio;
pci_iounmap(pdev, dimm_mmio);
kfree(hpriv);
@@ -669,8 +670,8 @@
readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */
writel(port_ofs + PDC_DIMM_ATA_PKT,
- (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
- readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
VPRINTK("submitted ofs 0x%x (%u), seq %u\n",
port_ofs + PDC_DIMM_ATA_PKT,
port_ofs + PDC_DIMM_ATA_PKT,
@@ -718,7 +719,7 @@
VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
- ata_qc_complete(qc, ata_wait_idle(ap));
+ ata_qc_complete(qc, ac_err_mask(ata_wait_idle(ap)));
pdc20621_pop_hdma(qc);
}
@@ -747,8 +748,8 @@
writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4));
readl(mmio + PDC_20621_SEQCTL + (seq * 4));
writel(port_ofs + PDC_DIMM_ATA_PKT,
- (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
- readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
}
/* step two - execute ATA command */
@@ -756,7 +757,7 @@
VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
- ata_qc_complete(qc, ata_wait_idle(ap));
+ ata_qc_complete(qc, ac_err_mask(ata_wait_idle(ap)));
pdc20621_pop_hdma(qc);
}
handled = 1;
@@ -766,7 +767,7 @@
status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
- ata_qc_complete(qc, status);
+ ata_qc_complete(qc, ac_err_mask(status));
handled = 1;
} else {
@@ -881,7 +882,7 @@
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
- ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
+ ata_qc_complete(qc, __ac_err_mask(ata_wait_idle(ap)));
break;
default:
@@ -890,7 +891,7 @@
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
ap->id, qc->tf.command, drv_stat);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, ac_err_mask(drv_stat));
break;
}
@@ -899,7 +900,7 @@
DPRINTK("EXIT\n");
}
-static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON (tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
@@ -907,7 +908,7 @@
}
-static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON (tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
@@ -1014,7 +1015,7 @@
idx++;
dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size :
(long) (window_size - offset);
- memcpy_toio((char *) (dimm_mmio + offset / 4), (char *) psource, dist);
+ memcpy_toio(dimm_mmio + offset / 4, psource, dist);
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
@@ -1023,8 +1024,7 @@
for (; (long) size >= (long) window_size ;) {
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_toio((char *) (dimm_mmio), (char *) psource,
- window_size / 4);
+ memcpy_toio(dimm_mmio, psource, window_size / 4);
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
psource += window_size;
@@ -1035,7 +1035,7 @@
if (size) {
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_toio((char *) (dimm_mmio), (char *) psource, size / 4);
+ memcpy_toio(dimm_mmio, psource, size / 4);
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
}
@@ -1386,7 +1386,7 @@
int rc;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 4c9fb8b..a5e245c 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -32,6 +32,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -90,7 +91,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations uli_ops = {
+static const struct ata_port_operations uli_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -178,12 +179,16 @@
static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ static int printed_version;
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi;
int rc;
unsigned int board_idx = (unsigned int) ent->driver_data;
int pci_dev_busy = 0;
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
rc = pci_enable_device(pdev);
if (rc)
return rc;
@@ -202,7 +207,7 @@
goto err_out_regions;
ppi = &uli_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent) {
rc = -ENOMEM;
goto err_out_regions;
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 128b996..b3ecdbe 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -41,6 +41,7 @@
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -109,7 +110,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations svia_sata_ops = {
+static const struct ata_port_operations svia_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -212,7 +213,7 @@
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi = &svia_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
return NULL;
@@ -259,15 +260,15 @@
u8 tmp8;
pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
- printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
- pci_name(pdev),
+ dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
(int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
/* make sure SATA channels are enabled */
pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
- pci_name(pdev), (int) tmp8);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "enabling SATA channels (0x%x)\n",
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
}
@@ -275,8 +276,9 @@
/* make sure interrupts for each channel sent to us */
pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
- pci_name(pdev), (int) tmp8);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "enabling SATA channel interrupts (0x%x)\n",
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
}
@@ -284,8 +286,9 @@
/* make sure native mode is enabled */
pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
- pci_name(pdev), (int) tmp8);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "enabling SATA channel native mode (0x%x)\n",
+ (int) tmp8);
tmp8 |= NATIVE_MODE_ALL;
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
@@ -303,7 +306,7 @@
u8 tmp8;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
@@ -318,8 +321,9 @@
if (board_id == vt6420) {
pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
if (tmp8 & SATA_2DEV) {
- printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
- pci_name(pdev), (int) tmp8);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "SATA master/slave not supported (0x%x)\n",
+ (int) tmp8);
rc = -EIO;
goto err_out_regions;
}
@@ -332,10 +336,11 @@
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
if ((pci_resource_start(pdev, i) == 0) ||
(pci_resource_len(pdev, i) < bar_sizes[i])) {
- printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
- pci_name(pdev), i,
- pci_resource_start(pdev, i),
- pci_resource_len(pdev, i));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
+ i,
+ pci_resource_start(pdev, i),
+ pci_resource_len(pdev, i));
rc = -ENODEV;
goto err_out_regions;
}
@@ -353,8 +358,7 @@
probe_ent = vt6421_init_probe_ent(pdev);
if (!probe_ent) {
- printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev, "out of memory\n");
rc = -ENOMEM;
goto err_out_regions;
}
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index cf94e01..bb84ba0 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -42,6 +42,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -86,7 +87,7 @@
{
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
- return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -95,16 +96,16 @@
{
if (sc_reg > SCR_CONTROL)
return;
- writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
{
- unsigned long mask_addr;
+ void __iomem *mask_addr;
u8 mask;
- mask_addr = (unsigned long) ap->host_set->mmio_base +
+ mask_addr = ap->host_set->mmio_base +
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
mask = readb(mask_addr);
if (ctl & ATA_NIEN)
@@ -115,7 +116,7 @@
}
-static void vsc_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -153,16 +154,24 @@
static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah;
+ u16 nsect, lbal, lbam, lbah, feature;
- nsect = tf->nsect = readw(ioaddr->nsect_addr);
- lbal = tf->lbal = readw(ioaddr->lbal_addr);
- lbam = tf->lbam = readw(ioaddr->lbam_addr);
- lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->command = ata_check_status(ap);
tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = readb(ioaddr->error_addr);
+ tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
@@ -231,7 +240,7 @@
};
-static struct ata_port_operations vsc_sata_ops = {
+static const struct ata_port_operations vsc_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = vsc_sata_tf_load,
.tf_read = vsc_sata_tf_read,
@@ -283,11 +292,11 @@
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
int pci_dev_busy = 0;
- void *mmio_base;
+ void __iomem *mmio_base;
int rc;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 1f0ebab..a5711d5 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -130,7 +130,7 @@
* Returns: Pointer to request block.
*/
struct scsi_request *scsi_allocate_request(struct scsi_device *sdev,
- int gfp_mask)
+ gfp_t gfp_mask)
{
const int offset = ALIGN(sizeof(struct scsi_request), 4);
const int size = offset + sizeof(struct request);
@@ -196,7 +196,7 @@
unsigned int users;
char *name;
unsigned int slab_flags;
- unsigned int gfp_mask;
+ gfp_t gfp_mask;
};
static struct scsi_host_cmd_pool scsi_cmd_pool = {
@@ -213,7 +213,7 @@
static DECLARE_MUTEX(host_cmd_pool_mutex);
static struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct scsi_cmnd *cmd;
@@ -245,7 +245,7 @@
*
* Returns: The allocated scsi command structure.
*/
-struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, int gfp_mask)
+struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask)
{
struct scsi_cmnd *cmd;
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index de7f98c..6a3f6aa 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -205,7 +205,8 @@
unsigned int inlen, outlen, cmdlen;
unsigned int needed, buf_needed;
int timeout, retries, result;
- int data_direction, gfp_mask = GFP_KERNEL;
+ int data_direction;
+ gfp_t gfp_mask = GFP_KERNEL;
if (!sic)
return -EINVAL;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 0074f28..3ff5388 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -677,7 +677,7 @@
return NULL;
}
-static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, int gfp_mask)
+static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, gfp_t gfp_mask)
{
struct scsi_host_sg_pool *sgp;
struct scatterlist *sgl;
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 771e97e..b856e14 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -26,6 +26,7 @@
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/sched.h> /* workqueue stuff, HZ */
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 8bb8222..d2caa35 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -19,6 +19,9 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index ad94367..d86d5c2 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -49,6 +49,7 @@
#include <linux/seq_file.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/scatterlist.h>
#include "scsi.h"
#include <scsi/scsi_dbg.h>
@@ -104,8 +105,8 @@
#define SG_DEV_ARR_LUMP 32 /* amount to over allocate sg_dev_arr by */
-static int sg_add(struct class_device *);
-static void sg_remove(struct class_device *);
+static int sg_add(struct class_device *, struct class_interface *);
+static void sg_remove(struct class_device *, struct class_interface *);
static Scsi_Request *dummy_cmdp; /* only used for sizeof */
@@ -1506,7 +1507,7 @@
}
static int
-sg_add(struct class_device *cl_dev)
+sg_add(struct class_device *cl_dev, struct class_interface *cl_intf)
{
struct scsi_device *scsidp = to_scsi_device(cl_dev->dev);
struct gendisk *disk;
@@ -1550,7 +1551,7 @@
if (sg_sysfs_valid) {
struct class_device * sg_class_member;
- sg_class_member = class_device_create(sg_sysfs_class,
+ sg_class_member = class_device_create(sg_sysfs_class, NULL,
MKDEV(SCSI_GENERIC_MAJOR, k),
cl_dev->dev, "%s",
disk->disk_name);
@@ -1582,7 +1583,7 @@
}
static void
-sg_remove(struct class_device *cl_dev)
+sg_remove(struct class_device *cl_dev, struct class_interface *cl_intf)
{
struct scsi_device *scsidp = to_scsi_device(cl_dev->dev);
Sg_device *sdp = NULL;
@@ -1886,13 +1887,17 @@
int i;
for (i=0; i < nr_pages; i++) {
- if (dirtied && !PageReserved(sgl[i].page))
- SetPageDirty(sgl[i].page);
- /* unlock_page(sgl[i].page); */
+ struct page *page = sgl[i].page;
+
+ /* XXX: just for debug. Remove when PageReserved is removed */
+ BUG_ON(PageReserved(page));
+ if (dirtied)
+ SetPageDirty(page);
+ /* unlock_page(page); */
/* FIXME: cache flush missing for rw==READ
* FIXME: call the correct reference counting function
*/
- page_cache_release(sgl[i].page);
+ page_cache_release(page);
}
return 0;
@@ -1992,9 +1997,7 @@
if (!p)
break;
}
- sclp->page = virt_to_page(p);
- sclp->offset = offset_in_page(p);
- sclp->length = ret_sz;
+ sg_set_buf(sclp, p, ret_sz);
SCSI_LOG_TIMEOUT(5, printk("sg_build_build: k=%d, a=0x%p, len=%d\n",
k, sg_scatg2virt(sclp), ret_sz));
@@ -2644,7 +2647,7 @@
sg_page_malloc(int rqSz, int lowDma, int *retSzp)
{
char *resp = NULL;
- int page_mask;
+ gfp_t page_mask;
int order, a_size;
int resSz = rqSz;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index d001c04..da97662 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3577,7 +3577,8 @@
static struct st_buffer *
new_tape_buffer(int from_initialization, int need_dma, int max_sg)
{
- int i, priority, got = 0, segs = 0;
+ int i, got = 0, segs = 0;
+ gfp_t priority;
struct st_buffer *tb;
if (from_initialization)
@@ -3610,7 +3611,8 @@
/* Try to allocate enough space in the tape buffer */
static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma)
{
- int segs, nbr, max_segs, b_size, priority, order, got;
+ int segs, nbr, max_segs, b_size, order, got;
+ gfp_t priority;
if (new_size <= STbuffer->buffer_size)
return 1;
@@ -4375,7 +4377,7 @@
snprintf(name, 10, "%s%s%s", rew ? "n" : "",
STp->disk->disk_name, st_formats[i]);
st_class_member =
- class_device_create(st_sysfs_class,
+ class_device_create(st_sysfs_class, NULL,
MKDEV(SCSI_TAPE_MAJOR,
TAPE_MINOR(dev_num, mode, rew)),
&STp->device->sdev_gendev, "%s", name);
@@ -4524,12 +4526,16 @@
int i;
for (i=0; i < nr_pages; i++) {
- if (dirtied && !PageReserved(sgl[i].page))
- SetPageDirty(sgl[i].page);
+ struct page *page = sgl[i].page;
+
+ /* XXX: just for debug. Remove when PageReserved is removed */
+ BUG_ON(PageReserved(page));
+ if (dirtied)
+ SetPageDirty(page);
/* FIXME: cache flush missing for rw==READ
* FIXME: call the correct reference counting function
*/
- page_cache_release(sgl[i].page);
+ page_cache_release(page);
}
return 0;
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index e753ba2..a1a58e1 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -37,6 +37,9 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
+#include <linux/slab.h>
+
#include "sym_glue.h"
#include "sym_nvram.h"
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 3131a6b..3a264a4 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -37,6 +37,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/gfp.h>
+
#ifndef SYM_HIPD_H
#define SYM_HIPD_H
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 5a51051..b131432 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -88,7 +88,7 @@
struct gsc_irq gsc_irq;
u32 zalon_vers;
int error = -ENODEV;
- void __iomem *zalon = ioremap(dev->hpa, 4096);
+ void __iomem *zalon = ioremap(dev->hpa.start, 4096);
void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET;
static int unit = 0;
struct Scsi_Host *host;
@@ -127,7 +127,7 @@
device.chip = zalon720_chip;
device.host_id = 7;
device.dev = &dev->dev;
- device.slot.base = dev->hpa + GSC_SCSI_ZALON_OFFSET;
+ device.slot.base = dev->hpa.start + GSC_SCSI_ZALON_OFFSET;
device.slot.base_v = io_port;
device.slot.irq = dev->irq;
device.differential = 2;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d75cdf..afb7ddf 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2358,13 +2358,10 @@
return 0;
}
-static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level)
+static int serial8250_suspend(struct device *dev, pm_message_t state)
{
int i;
- if (level != SUSPEND_DISABLE)
- return 0;
-
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
@@ -2375,13 +2372,10 @@
return 0;
}
-static int serial8250_resume(struct device *dev, u32 level)
+static int serial8250_resume(struct device *dev)
{
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 431aa57..8b49479 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -29,7 +29,6 @@
static int __init
serial_init_chip(struct parisc_device *dev)
{
- static int serial_line_nr;
struct uart_port port;
unsigned long address;
int err;
@@ -42,12 +41,13 @@
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
- "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa);
+ "Enable support for Wax, Lasi, Asp or Dino.\n",
+ dev->hpa.start);
}
return -ENODEV;
}
- address = dev->hpa;
+ address = dev->hpa.start;
if (dev->id.sversion != 0x8d) {
address += 0x800;
}
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 679e678..ddd0307 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -50,6 +50,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/hardware.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_serial.h>
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 1ff629c..938d185 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -50,6 +50,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/amba_serial.h>
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 87ef368..6a67e8f 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -408,7 +408,11 @@
{
.iobase = SYSCON1,
.irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
+#ifdef CONFIG_MP1000_90MHZ
+ .uartclk = 4515840,
+#else
.uartclk = 3686400,
+#endif
.fifosize = 16,
.ops = &clps711x_pops,
.line = 0,
@@ -417,7 +421,11 @@
{
.iobase = SYSCON2,
.irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
+#ifdef CONFIG_MP1000_90MHZ
+ .uartclk = 4515840,
+#else
.uartclk = 3686400,
+#endif
.fifosize = 16,
.ops = &clps711x_pops,
.line = 1,
@@ -551,6 +559,7 @@
static struct uart_driver clps711x_reg = {
.driver_name = "ttyCL",
.dev_name = "ttyCL",
+ .devfs_name = "ttyCL",
.major = SERIAL_CLPS711X_MAJOR,
.minor = SERIAL_CLPS711X_MINOR,
.nr = UART_NR,
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index bdb4e45..5b3933b 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -921,21 +921,21 @@
.cons = IMX_CONSOLE,
};
-static int serial_imx_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_imx_suspend(struct device *_dev, pm_message_t state)
{
struct imx_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&imx_reg, &sport->port);
return 0;
}
-static int serial_imx_resume(struct device *_dev, u32 level)
+static int serial_imx_resume(struct device *_dev)
{
struct imx_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&imx_reg, &sport->port);
return 0;
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index f88fdd4..771676a 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -308,6 +308,8 @@
typedef void ioc4_intr_func_f(void *, uint32_t);
typedef ioc4_intr_func_f *ioc4_intr_func_t;
+static unsigned int Num_of_ioc4_cards;
+
/* defining this will get you LOTS of great debug info */
//#define DEBUG_INTERRUPTS
#define DPRINT_CONFIG(_x...) ;
@@ -317,7 +319,8 @@
#define WAKEUP_CHARS 256
/* number of characters we want to transmit to the lower level at a time */
-#define IOC4_MAX_CHARS 128
+#define IOC4_MAX_CHARS 256
+#define IOC4_FIFO_CHARS 255
/* Device name we're using */
#define DEVICE_NAME "ttyIOC"
@@ -1038,6 +1041,7 @@
return -ENOMEM;
}
memset(port, 0, sizeof(struct ioc4_port));
+ spin_lock_init(&port->ip_lock);
/* we need to remember the previous ones, to point back to
* them farther down - setting up the ring buffers.
@@ -1691,12 +1695,14 @@
baud = 9600;
if (!the_port->fifosize)
- the_port->fifosize = IOC4_MAX_CHARS;
+ the_port->fifosize = IOC4_FIFO_CHARS;
the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
the_port->ignore_status_mask = N_ALL_INPUT;
+ info->tty->low_latency = 1;
+
if (I_IGNPAR(info->tty))
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
@@ -1742,7 +1748,6 @@
*/
static inline int ic4_startup_local(struct uart_port *the_port)
{
- int retval = 0;
struct ioc4_port *port;
struct uart_info *info;
@@ -1754,9 +1759,6 @@
return -1;
info = the_port->info;
- if (info->flags & UIF_INITIALIZED) {
- return retval;
- }
if (info->tty) {
set_bit(TTY_IO_ERROR, &info->tty->flags);
@@ -1775,7 +1777,6 @@
/* set the speed of the serial port */
ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
- info->flags |= UIF_INITIALIZED;
return 0;
}
@@ -1785,9 +1786,13 @@
*/
static void ioc4_cb_output_lowat(struct ioc4_port *port)
{
+ unsigned long pflags;
+
/* ip_lock is set on the call here */
if (port->ip_port) {
+ spin_lock_irqsave(&port->ip_port->lock, pflags);
transmit_chars(port->ip_port);
+ spin_unlock_irqrestore(&port->ip_port->lock, pflags);
}
}
@@ -2064,8 +2069,7 @@
* available data as long as it returns some.
*/
/* Re-arm the timer */
- writel(port->ip_rx_cons | IOC4_SRCIR_ARM,
- &port->ip_serial_regs->srcir);
+ writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
cons_ptr = port->ip_rx_cons;
@@ -2299,6 +2303,7 @@
}
return total;
}
+
/**
* receive_chars - upper level read. Called with ip_lock.
* @the_port: port to read from
@@ -2307,9 +2312,11 @@
{
struct tty_struct *tty;
unsigned char ch[IOC4_MAX_CHARS];
- int read_count, request_count;
+ int read_count, request_count = IOC4_MAX_CHARS;
struct uart_icount *icount;
struct uart_info *info = the_port->info;
+ int flip = 0;
+ unsigned long pflags;
/* Make sure all the pointers are "good" ones */
if (!info)
@@ -2317,16 +2324,17 @@
if (!info->tty)
return;
+ spin_lock_irqsave(&the_port->lock, pflags);
tty = info->tty;
- request_count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
+ if (request_count > TTY_FLIPBUF_SIZE - tty->flip.count)
+ request_count = TTY_FLIPBUF_SIZE - tty->flip.count;
if (request_count > 0) {
- if (request_count > IOC4_MAX_CHARS - 2)
- request_count = IOC4_MAX_CHARS - 2;
icount = &the_port->icount;
read_count = do_read(the_port, ch, request_count);
if (read_count > 0) {
+ flip = 1;
memcpy(tty->flip.char_buf_ptr, ch, read_count);
memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count);
tty->flip.char_buf_ptr += read_count;
@@ -2335,7 +2343,11 @@
icount->rx += read_count;
}
}
- tty_flip_buffer_push(tty);
+
+ spin_unlock_irqrestore(&the_port->lock, pflags);
+
+ if (flip)
+ tty_flip_buffer_push(tty);
}
/**
@@ -2393,18 +2405,14 @@
info = the_port->info;
- if (!(info->flags & UIF_INITIALIZED))
- return;
-
wake_up_interruptible(&info->delta_msr_wait);
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
- spin_lock_irqsave(&port->ip_lock, port_flags);
+ spin_lock_irqsave(&the_port->lock, port_flags);
set_notification(port, N_ALL, 0);
- info->flags &= ~UIF_INITIALIZED;
- spin_unlock_irqrestore(&port->ip_lock, port_flags);
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
}
/**
@@ -2463,12 +2471,10 @@
static void ic4_start_tx(struct uart_port *the_port)
{
struct ioc4_port *port = get_ioc4_port(the_port);
- unsigned long flags;
if (port) {
- spin_lock_irqsave(&port->ip_lock, flags);
- transmit_chars(the_port);
- spin_unlock_irqrestore(&port->ip_lock, flags);
+ set_notification(port, N_OUTPUT_LOWAT, 1);
+ enable_intrs(port, port->ip_hooks->intr_tx_mt);
}
}
@@ -2510,9 +2516,9 @@
}
/* Start up the serial port */
- spin_lock_irqsave(&port->ip_lock, port_flags);
+ spin_lock_irqsave(&the_port->lock, port_flags);
retval = ic4_startup_local(the_port);
- spin_unlock_irqrestore(&port->ip_lock, port_flags);
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
return retval;
}
@@ -2527,12 +2533,11 @@
ic4_set_termios(struct uart_port *the_port,
struct termios *termios, struct termios *old_termios)
{
- struct ioc4_port *port = get_ioc4_port(the_port);
unsigned long port_flags;
- spin_lock_irqsave(&port->ip_lock, port_flags);
+ spin_lock_irqsave(&the_port->lock, port_flags);
ioc4_change_speed(the_port, termios, old_termios);
- spin_unlock_irqrestore(&port->ip_lock, port_flags);
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
}
/**
@@ -2607,24 +2612,25 @@
__FUNCTION__, (void *)the_port,
(void *)port));
- spin_lock_init(&the_port->lock);
/* membase, iobase and mapbase just need to be non-0 */
the_port->membase = (unsigned char __iomem *)1;
- the_port->line = the_port->iobase = ii;
+ the_port->iobase = (pdev->bus->number << 16) | ii;
+ the_port->line = (Num_of_ioc4_cards << 2) | ii;
the_port->mapbase = 1;
the_port->type = PORT_16550A;
- the_port->fifosize = IOC4_MAX_CHARS;
+ the_port->fifosize = IOC4_FIFO_CHARS;
the_port->ops = &ioc4_ops;
the_port->irq = control->ic_irq;
the_port->dev = &pdev->dev;
+ spin_lock_init(&the_port->lock);
if (uart_add_one_port(&ioc4_uart, the_port) < 0) {
printk(KERN_WARNING
- "%s: unable to add port %d\n",
- __FUNCTION__, the_port->line);
+ "%s: unable to add port %d bus %d\n",
+ __FUNCTION__, the_port->line, pdev->bus->number);
} else {
DPRINT_CONFIG(
- ("IOC4 serial driver port %d irq = %d\n",
- the_port->line, the_port->irq));
+ ("IOC4 serial port %d irq = %d, bus %d\n",
+ the_port->line, the_port->irq, pdev->bus->number));
}
/* all ports are rs232 for now */
ioc4_set_proto(port, PROTO_RS232);
@@ -2734,6 +2740,8 @@
if ((ret = ioc4_serial_core_attach(idd->idd_pdev)))
goto out4;
+ Num_of_ioc4_cards++;
+
return ret;
/* error exits that give back resources */
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 0585ab2..8a79968 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -781,22 +781,22 @@
#ifdef CONFIG_PM
static int
-mpc52xx_uart_suspend(struct device *dev, pm_message_t state, u32 level)
+mpc52xx_uart_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&mpc52xx_uart_driver, port);
return 0;
}
static int
-mpc52xx_uart_resume(struct device *dev, u32 level)
+mpc52xx_uart_resume(struct device *dev)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
- if (port && level == RESUME_ENABLE)
+ if (port)
uart_resume_port(&mpc52xx_uart_driver, port);
return 0;
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index efe79b1..aec83f5 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -1100,6 +1100,8 @@
{
pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line);
+ /* Issue a Receive Abort to clear any receive errors */
+ writel(MPSC_CHR_2_RA, pi->mpsc_base + MPSC_CHR_2);
if (pi->rcv_data) {
mpsc_enter_hunt(pi);
mpsc_sdma_cmd(pi, SDMA_SDCM_ERD);
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 1890646..660bae5 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -27,6 +27,7 @@
#include <linux/delay.h> /* for udelay */
#include <linux/device.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/parisc-device.h>
#ifdef CONFIG_MAGIC_SYSRQ
@@ -444,7 +445,7 @@
unsigned long bytecnt;
struct uart_port *port;
- status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32);
+ status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
if(status != PDC_OK) {
printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
return 1;
@@ -469,16 +470,18 @@
for(i = 0; i < ports; ++i, ++port_cnt) {
port = &mux_ports[port_cnt];
port->iobase = 0;
- port->mapbase = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET);
+ port->mapbase = dev->hpa.start + MUX_OFFSET +
+ (i * MUX_LINE_OFFSET);
port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
port->iotype = SERIAL_IO_MEM;
port->type = PORT_MUX;
- port->irq = SERIAL_IRQ_NONE;
+ port->irq = NO_IRQ;
port->uartclk = 0;
port->fifosize = MUX_FIFO_SIZE;
port->ops = &mux_pops;
port->flags = UPF_BOOT_AUTOCONF;
port->line = port_cnt;
+ spin_lock_init(&port->lock);
status = uart_add_one_port(&mux_driver, port);
BUG_ON(status);
}
@@ -497,7 +500,7 @@
MODULE_DEVICE_TABLE(parisc, mux_tbl);
static struct parisc_driver serial_mux_driver = {
- .name = "Serial MUX",
+ .name = "serial_mux",
.id_table = mux_tbl,
.probe = mux_probe,
};
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 90c2a86..8cc4ced 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -358,6 +358,9 @@
unsigned long flags;
int retval;
+ if (port->line == 3) /* HWUART */
+ up->mcr |= UART_MCR_AFE;
+ else
up->mcr = 0;
/*
@@ -481,8 +484,10 @@
if ((up->port.uartclk / quot) < (2400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
- else
+ else if ((up->port.uartclk / quot) < (230400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
/*
* Ok, we're now changing the port state. Do it with
@@ -772,6 +777,20 @@
.ops = &serial_pxa_pops,
.line = 2,
},
+ }, { /* HWUART */
+ .name = "HWUART",
+ .cken = CKEN4_HWUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&HWUART,
+ .mapbase = __PREG(HWUART),
+ .irq = IRQ_HWUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 3,
+ },
}
};
@@ -786,21 +805,21 @@
.cons = PXA_CONSOLE,
};
-static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_pxa_suspend(struct device *_dev, pm_message_t state)
{
struct uart_pxa_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&serial_pxa_reg, &sport->port);
return 0;
}
-static int serial_pxa_resume(struct device *_dev, u32 level)
+static int serial_pxa_resume(struct device *_dev)
{
struct uart_pxa_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&serial_pxa_reg, &sport->port);
return 0;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 52692aa..06a17df 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1134,23 +1134,22 @@
#ifdef CONFIG_PM
-static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state,
- u32 level)
+static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port = s3c24xx_dev_to_port(dev);
- if (port && level == SUSPEND_DISABLE)
+ if (port)
uart_suspend_port(&s3c24xx_uart_drv, port);
return 0;
}
-static int s3c24xx_serial_resume(struct device *dev, u32 level)
+static int s3c24xx_serial_resume(struct device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- if (port && level == RESUME_ENABLE) {
+ if (port) {
clk_enable(ourport->clk);
s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
clk_disable(ourport->clk);
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index dd8aed2..c4a789e 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -834,21 +834,21 @@
.cons = SA1100_CONSOLE,
};
-static int sa1100_serial_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int sa1100_serial_suspend(struct device *_dev, pm_message_t state)
{
struct sa1100_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&sa1100_reg, &sport->port);
return 0;
}
-static int sa1100_serial_resume(struct device *_dev, u32 level)
+static int sa1100_serial_resume(struct device *_dev)
{
struct sa1100_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&sa1100_reg, &sport->port);
return 0;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 2d8622e..401d94a 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -147,8 +147,7 @@
* once we have successfully opened the port. Also set
* up the tty->alt_speed kludge
*/
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
if (port->type == PORT_UNKNOWN)
return 0;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 0c5d65a..2b623ab 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -976,14 +976,11 @@
return 0;
}
-static int siu_suspend(struct device *dev, pm_message_t state, u32 level)
+static int siu_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port;
int i;
- if (level != SUSPEND_DISABLE)
- return 0;
-
for (i = 0; i < siu_uart_driver.nr; i++) {
port = &siu_uart_ports[i];
if ((port->type == PORT_VR41XX_SIU ||
@@ -995,14 +992,11 @@
return 0;
}
-static int siu_resume(struct device *dev, u32 level)
+static int siu_resume(struct device *dev)
{
struct uart_port *port;
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
for (i = 0; i < siu_uart_driver.nr; i++) {
port = &siu_uart_ports[i];
if ((port->type == PORT_VR41XX_SIU ||
diff --git a/drivers/sh/superhyway/superhyway.c b/drivers/sh/superhyway/superhyway.c
index f056276..28757cb 100644
--- a/drivers/sh/superhyway/superhyway.c
+++ b/drivers/sh/superhyway/superhyway.c
@@ -16,6 +16,8 @@
#include <linux/types.h>
#include <linux/list.h>
#include <linux/superhyway.h>
+#include <linux/string.h>
+#include <linux/slab.h>
static int superhyway_devices;
diff --git a/drivers/tc/tc.c b/drivers/tc/tc.c
index a89ef4d..a0e5af6 100644
--- a/drivers/tc/tc.c
+++ b/drivers/tc/tc.c
@@ -8,33 +8,31 @@
* for more details.
*
* Copyright (c) Harald Koerfgen, 1998
- * Copyright (c) 2001, 2003 Maciej W. Rozycki
+ * Copyright (c) 2001, 2003, 2005 Maciej W. Rozycki
*/
-#include <linux/string.h>
#include <linux/init.h>
-#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
#include <asm/addrspace.h>
+#include <asm/bug.h>
#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/paccess.h>
+
#include <asm/dec/machtype.h>
#include <asm/dec/prom.h>
#include <asm/dec/tcinfo.h>
#include <asm/dec/tcmodule.h>
#include <asm/dec/interrupts.h>
-#include <asm/paccess.h>
-#include <asm/ptrace.h>
-
-#define TC_DEBUG
MODULE_LICENSE("GPL");
slot_info tc_bus[MAX_SLOT];
static int num_tcslots;
static tcinfo *info;
-unsigned long system_base;
-
/*
* Interface to the world. Read comment in include/asm-mips/tc.h.
*/
@@ -97,13 +95,16 @@
static void __init tc_probe(unsigned long startaddr, unsigned long size,
int slots)
{
+ unsigned long slotaddr;
int i, slot, err;
long offset;
- unsigned char pattern[4];
- unsigned char *module;
+ u8 pattern[4];
+ volatile u8 *module;
for (slot = 0; slot < slots; slot++) {
- module = (char *)(startaddr + slot * size);
+ slotaddr = startaddr + slot * size;
+ module = ioremap_nocache(slotaddr, size);
+ BUG_ON(!module);
offset = OLDCARD;
@@ -112,8 +113,10 @@
err |= get_dbe(pattern[1], module + OLDCARD + TC_PATTERN1);
err |= get_dbe(pattern[2], module + OLDCARD + TC_PATTERN2);
err |= get_dbe(pattern[3], module + OLDCARD + TC_PATTERN3);
- if (err)
+ if (err) {
+ iounmap(module);
continue;
+ }
if (pattern[0] != 0x55 || pattern[1] != 0x00 ||
pattern[2] != 0xaa || pattern[3] != 0xff) {
@@ -124,16 +127,20 @@
err |= get_dbe(pattern[1], module + TC_PATTERN1);
err |= get_dbe(pattern[2], module + TC_PATTERN2);
err |= get_dbe(pattern[3], module + TC_PATTERN3);
- if (err)
+ if (err) {
+ iounmap(module);
continue;
+ }
}
if (pattern[0] != 0x55 || pattern[1] != 0x00 ||
- pattern[2] != 0xaa || pattern[3] != 0xff)
+ pattern[2] != 0xaa || pattern[3] != 0xff) {
+ iounmap(module);
continue;
+ }
- tc_bus[slot].base_addr = (unsigned long)module;
- for(i = 0; i < 8; i++) {
+ tc_bus[slot].base_addr = slotaddr;
+ for (i = 0; i < 8; i++) {
tc_bus[slot].firmware[i] =
module[TC_FIRM_VER + offset + 4 * i];
tc_bus[slot].vendor[i] =
@@ -171,13 +178,15 @@
tc_bus[slot].interrupt = -1;
break;
}
+
+ iounmap(module);
}
}
/*
* the main entry
*/
-void __init tc_init(void)
+static int __init tc_init(void)
{
int tc_clock;
int i;
@@ -185,7 +194,7 @@
unsigned long slot_size;
if (!TURBOCHANNEL)
- return;
+ return 0;
for (i = 0; i < MAX_SLOT; i++) {
tc_bus[i].base_addr = 0;
@@ -196,8 +205,8 @@
tc_bus[i].flags = FREE;
}
- info = (tcinfo *) rex_gettcinfo();
- slot0addr = (unsigned long)KSEG1ADDR(rex_slot_address(0));
+ info = rex_gettcinfo();
+ slot0addr = CPHYSADDR((long)rex_slot_address(0));
switch (mips_machtype) {
case MACH_DS5000_200:
@@ -216,37 +225,24 @@
tc_clock = 10000 / info->clk_period;
- if (TURBOCHANNEL && info->slot_size && slot0addr) {
- printk("TURBOchannel rev. %1d at %2d.%1d MHz ", info->revision,
- tc_clock / 10, tc_clock % 10);
- printk("(with%s parity)\n", info->parity ? "" : "out");
+ if (info->slot_size && slot0addr) {
+ pr_info("TURBOchannel rev. %d at %d.%d MHz (with%s parity)\n",
+ info->revision, tc_clock / 10, tc_clock % 10,
+ info->parity ? "" : "out");
slot_size = info->slot_size << 20;
tc_probe(slot0addr, slot_size, num_tcslots);
- /*
- * All TURBOchannel DECstations have the onboard devices
- * where the (num_tcslots + 0 or 1 on DS5k/xx) Option Module
- * would be.
- */
- if(mips_machtype == MACH_DS5000_XX)
- i = 1;
- else
- i = 0;
-
- system_base = slot0addr + slot_size * (num_tcslots + i);
-
-#ifdef TC_DEBUG
- for (i = 0; i < num_tcslots; i++)
- if (tc_bus[i].base_addr) {
- printk(" slot %d: ", i);
- printk("%s %s %s\n", tc_bus[i].vendor,
- tc_bus[i].name, tc_bus[i].firmware);
- }
-#endif
- ioport_resource.end = KSEG2 - 1;
+ for (i = 0; i < num_tcslots; i++) {
+ if (!tc_bus[i].base_addr)
+ continue;
+ pr_info(" slot %d: %s %s %s\n", i, tc_bus[i].vendor,
+ tc_bus[i].name, tc_bus[i].firmware);
+ }
}
+
+ return 0;
}
subsys_initcall(tc_init);
@@ -257,4 +253,3 @@
EXPORT_SYMBOL(get_tc_base_addr);
EXPORT_SYMBOL(get_tc_irq_nr);
EXPORT_SYMBOL(get_tc_speed);
-EXPORT_SYMBOL(system_base);
diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c
index 6bed871..c52af73 100644
--- a/drivers/tc/zs.c
+++ b/drivers/tc/zs.c
@@ -65,14 +65,14 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
-#include <asm/dec/serial.h>
-#ifdef CONFIG_MACH_DECSTATION
#include <asm/dec/interrupts.h>
-#include <asm/dec/machtype.h>
-#include <asm/dec/tc.h>
#include <asm/dec/ioasic_addrs.h>
-#endif
+#include <asm/dec/machtype.h>
+#include <asm/dec/serial.h>
+#include <asm/dec/system.h>
+#include <asm/dec/tc.h>
+
#ifdef CONFIG_KGDB
#include <asm/kgdb.h>
#endif
@@ -192,18 +192,6 @@
static void change_speed(struct dec_serial *info);
static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char tmp_buf[4096]; /* This is cheating */
-static DECLARE_MUTEX(tmp_buf_sem);
-
static inline int serial_paranoia_check(struct dec_serial *info,
char *name, const char *routine)
{
@@ -1628,30 +1616,22 @@
return;
}
- /*
- * When serial console is activated, tc_init has not been called yet
- * and system_base is undefined. Unfortunately we have to hardcode
- * system_base for this case :-(. HK
- */
switch(mips_machtype) {
#ifdef CONFIG_MACH_DECSTATION
case MACH_DS5000_2X0:
case MACH_DS5900:
- system_base = KSEG1ADDR(0x1f800000);
n_chips = 2;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
break;
case MACH_DS5000_1XX:
- system_base = KSEG1ADDR(0x1c000000);
n_chips = 2;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
break;
case MACH_DS5000_XX:
- system_base = KSEG1ADDR(0x1c000000);
n_chips = 1;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
@@ -1673,10 +1653,10 @@
* The sccs reside on the high byte of the 16 bit IOBUS
*/
zs_channels[n_channels].control =
- (volatile unsigned char *)system_base +
+ (volatile void *)CKSEG1ADDR(dec_kn_slot_base +
(0 == chip ? zs_parms->scc0 : zs_parms->scc1) +
(0 == channel ? zs_parms->channel_a_offset :
- zs_parms->channel_b_offset);
+ zs_parms->channel_b_offset));
zs_channels[n_channels].data =
zs_channels[n_channels].control + 4;
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index df014c2..a50c2bc 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_USB_MON) += mon/
+obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
@@ -17,7 +18,6 @@
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_AUDIO) += class/
-obj-$(CONFIG_USB_BLUETOOTH_TTY) += class/
obj-$(CONFIG_USB_MIDI) += class/
obj-$(CONFIG_USB_PRINTER) += class/
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index 333e39b..ef105a9 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -28,29 +28,6 @@
To compile this driver as a module, choose M here: the
module will be called audio.
-comment "USB Bluetooth TTY can only be used with disabled Bluetooth subsystem"
- depends on USB && BT
-
-config USB_BLUETOOTH_TTY
- tristate "USB Bluetooth TTY support"
- depends on USB && BT=n
- ---help---
- This driver implements a nonstandard tty interface to a Bluetooth
- device that can be used only by specialized Bluetooth HCI software.
-
- Say Y here if you want to use OpenBT Bluetooth stack (available
- at <http://developer.axis.com/software>), or other TTY based
- Bluetooth stacks, and want to connect a USB Bluetooth device
- to your computer's USB port.
-
- Do *not* enable this driver if you want to use generic Linux
- Bluetooth support.
-
- If in doubt, say N here.
-
- To compile this driver as a module, choose M here: the
- module will be called bluetty.
-
config USB_MIDI
tristate "USB MIDI support"
depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER
diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile
index 971e549..2294712 100644
--- a/drivers/usb/class/Makefile
+++ b/drivers/usb/class/Makefile
@@ -5,6 +5,5 @@
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_AUDIO) += audio.o
-obj-$(CONFIG_USB_BLUETOOTH_TTY) += bluetty.o
obj-$(CONFIG_USB_MIDI) += usb-midi.o
obj-$(CONFIG_USB_PRINTER) += usblp.o
diff --git a/drivers/usb/class/bluetty.c b/drivers/usb/class/bluetty.c
deleted file mode 100644
index 5240233..0000000
--- a/drivers/usb/class/bluetty.c
+++ /dev/null
@@ -1,1279 +0,0 @@
-/*
- * bluetty.c Version 0.13
- *
- * Copyright (C) 2000, 2001 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2000 Mark Douglas Corner <mcorner@umich.edu>
- *
- * USB Bluetooth TTY driver, based on the Bluetooth Spec version 1.0B
- *
- * (2001/11/30) Version 0.13 gkh
- * - added locking patch from Masoodur Rahman <rmasoodu@in.ibm.com>
- * - removed active variable, as open_count will do.
- *
- * (2001/07/09) Version 0.12 gkh
- * - removed in_interrupt() call, as it doesn't make sense to do
- * that anymore.
- *
- * (2001/06/05) Version 0.11 gkh
- * - Fixed problem with read urb status saying that we have shutdown,
- * and that we shouldn't resubmit the urb. Patch from unknown.
- *
- * (2001/05/28) Version 0.10 gkh
- * - Fixed problem with using data from userspace in the bluetooth_write
- * function as found by the CHECKER project.
- * - Added a buffer to the write_urb_pool which reduces the number of
- * buffers being created and destroyed for ever write. Also cleans
- * up the logic a bit.
- * - Added a buffer to the control_urb_pool which fixes a memory leak
- * when the device is removed from the system.
- *
- * (2001/05/28) Version 0.9 gkh
- * Fixed problem with bluetooth==NULL for bluetooth_read_bulk_callback
- * which was found by both the CHECKER project and Mikko Rahkonen.
- *
- * (08/04/2001) gb
- * Identify version on module load.
- *
- * (2001/03/10) Version 0.8 gkh
- * Fixed problem with not unlinking interrupt urb on device close
- * and resubmitting the read urb on error with bluetooth struct.
- * Thanks to Narayan Mohanram <narayan@RovingNetworks.com> for the
- * fixes.
- *
- * (11/29/2000) Version 0.7 gkh
- * Fixed problem with overrunning the tty flip buffer.
- * Removed unneeded NULL pointer initialization.
- *
- * (10/05/2000) Version 0.6 gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- * Got a real major id number and name.
- *
- * (08/06/2000) Version 0.5 gkh
- * Fixed problem of not resubmitting the bulk read urb if there is
- * an error in the callback. Ericsson devices seem to need this.
- *
- * (07/11/2000) Version 0.4 gkh
- * Fixed bug in disconnect for when we call tty_hangup
- * Fixed bug in bluetooth_ctrl_msg where the bluetooth struct was not
- * getting attached to the control urb properly.
- * Fixed bug in bluetooth_write where we pay attention to the result
- * of bluetooth_ctrl_msg.
- *
- * (08/03/2000) Version 0.3 gkh mdc
- * Merged in Mark's changes to make the driver play nice with the Axis
- * stack.
- * Made the write bulk use an urb pool to enable larger transfers with
- * fewer calls to the driver.
- * Fixed off by one bug in acl pkt receive
- * Made packet counters specific to each bluetooth device
- * Added checks for zero length callbacks
- * Added buffers for int and bulk packets. Had to do this otherwise
- * packet types could intermingle.
- * Made a control urb pool for the control messages.
- *
- * (07/11/2000) Version 0.2 gkh
- * Fixed a small bug found by Nils Faerber in the usb_bluetooth_probe
- * function.
- *
- * (07/09/2000) Version 0.1 gkh
- * Initial release. Has support for sending ACL data (which is really just
- * a HCI frame.) Raw HCI commands and HCI events are not supported.
- * A ioctl will probably be needed for the HCI commands and events in the
- * future. All isoch endpoints are ignored at this time also.
- * This driver should work for all currently shipping USB Bluetooth
- * devices at this time :)
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <asm/uaccess.h>
-
-#define DEBUG
-#include <linux/usb.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.13"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman, Mark Douglas Corner"
-#define DRIVER_DESC "USB Bluetooth tty driver"
-
-/* define this if you have hardware that is not good */
-/*#define BTBUGGYHARDWARE */
-
-/* Class, SubClass, and Protocol codes that describe a Bluetooth device */
-#define WIRELESS_CLASS_CODE 0xe0
-#define RF_SUBCLASS_CODE 0x01
-#define BLUETOOTH_PROGRAMMING_PROTOCOL_CODE 0x01
-
-
-#define BLUETOOTH_TTY_MAJOR 216 /* real device node major id */
-#define BLUETOOTH_TTY_MINORS 256 /* whole lotta bluetooth devices */
-
-#define USB_BLUETOOTH_MAGIC 0x6d02 /* magic number for bluetooth struct */
-
-#define BLUETOOTH_CONTROL_REQUEST_TYPE 0x20
-
-/* Bluetooth packet types */
-#define CMD_PKT 0x01
-#define ACL_PKT 0x02
-#define SCO_PKT 0x03
-#define EVENT_PKT 0x04
-#define ERROR_PKT 0x05
-#define NEG_PKT 0x06
-
-/* Message sizes */
-#define MAX_EVENT_SIZE 0xFF
-#define EVENT_HDR_SIZE 3 /* 2 for the header + 1 for the type indicator */
-#define EVENT_BUFFER_SIZE (MAX_EVENT_SIZE + EVENT_HDR_SIZE)
-
-#define MAX_ACL_SIZE 0xFFFF
-#define ACL_HDR_SIZE 5 /* 4 for the header + 1 for the type indicator */
-#define ACL_BUFFER_SIZE (MAX_ACL_SIZE + ACL_HDR_SIZE)
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
-
-#define NUM_BULK_URBS 24
-#define NUM_CONTROL_URBS 16
-
-struct usb_bluetooth {
- int magic;
- struct usb_device * dev;
- struct tty_driver * tty_driver; /* the tty_driver for this device */
- struct tty_struct * tty; /* the corresponding tty for this port */
-
- unsigned char minor; /* the starting minor number for this device */
- int throttle; /* throttled by tty layer */
- int open_count;
-
- __u8 control_out_bInterfaceNum;
- struct urb * control_urb_pool[NUM_CONTROL_URBS];
- struct usb_ctrlrequest dr[NUM_CONTROL_URBS];
-
- unsigned char * interrupt_in_buffer;
- struct urb * interrupt_in_urb;
- __u8 interrupt_in_endpointAddress;
- __u8 interrupt_in_interval;
- int interrupt_in_buffer_size;
-
- unsigned char * bulk_in_buffer;
- struct urb * read_urb;
- __u8 bulk_in_endpointAddress;
- int bulk_in_buffer_size;
-
- int bulk_out_buffer_size;
- __u8 bulk_out_endpointAddress;
-
- wait_queue_head_t write_wait;
-
- struct work_struct work; /* work queue entry for line discipline waking up */
-
- unsigned int int_packet_pos;
- unsigned char int_buffer[EVENT_BUFFER_SIZE];
- unsigned int bulk_packet_pos;
- unsigned char bulk_buffer[ACL_BUFFER_SIZE]; /* 64k preallocated, fix? */
- struct semaphore lock;
-};
-
-
-/* local function prototypes */
-static int bluetooth_open (struct tty_struct *tty, struct file *filp);
-static void bluetooth_close (struct tty_struct *tty, struct file *filp);
-static int bluetooth_write (struct tty_struct *tty, const unsigned char *buf, int count);
-static int bluetooth_write_room (struct tty_struct *tty);
-static int bluetooth_chars_in_buffer (struct tty_struct *tty);
-static void bluetooth_throttle (struct tty_struct *tty);
-static void bluetooth_unthrottle (struct tty_struct *tty);
-static int bluetooth_ioctl (struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static void bluetooth_set_termios (struct tty_struct *tty, struct termios *old);
-
-static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs);
-static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs);
-static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-
-static int usb_bluetooth_probe (struct usb_interface *intf,
- const struct usb_device_id *id);
-static void usb_bluetooth_disconnect (struct usb_interface *intf);
-
-
-static struct usb_device_id usb_bluetooth_ids [] = {
- { USB_DEVICE_INFO(WIRELESS_CLASS_CODE, RF_SUBCLASS_CODE, BLUETOOTH_PROGRAMMING_PROTOCOL_CODE) },
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_bluetooth_ids);
-
-static struct usb_driver usb_bluetooth_driver = {
- .owner = THIS_MODULE,
- .name = "bluetty",
- .probe = usb_bluetooth_probe,
- .disconnect = usb_bluetooth_disconnect,
- .id_table = usb_bluetooth_ids,
-};
-
-static struct tty_driver *bluetooth_tty_driver;
-static struct usb_bluetooth *bluetooth_table[BLUETOOTH_TTY_MINORS];
-
-
-static inline int bluetooth_paranoia_check (struct usb_bluetooth *bluetooth, const char *function)
-{
- if (!bluetooth) {
- dbg("%s - bluetooth == NULL", function);
- return -1;
- }
- if (bluetooth->magic != USB_BLUETOOTH_MAGIC) {
- dbg("%s - bad magic number for bluetooth", function);
- return -1;
- }
-
- return 0;
-}
-
-
-static inline struct usb_bluetooth* get_usb_bluetooth (struct usb_bluetooth *bluetooth, const char *function)
-{
- if (!bluetooth ||
- bluetooth_paranoia_check (bluetooth, function)) {
- /* then say that we don't have a valid usb_bluetooth thing, which will
- * end up generating -ENODEV return values */
- return NULL;
- }
-
- return bluetooth;
-}
-
-
-static inline struct usb_bluetooth *get_bluetooth_by_index (int index)
-{
- return bluetooth_table[index];
-}
-
-
-static int bluetooth_ctrl_msg (struct usb_bluetooth *bluetooth, int request, int value, const unsigned char *buf, int len)
-{
- struct urb *urb = NULL;
- struct usb_ctrlrequest *dr = NULL;
- int i;
- int status;
-
- dbg ("%s", __FUNCTION__);
-
- /* try to find a free urb in our list */
- for (i = 0; i < NUM_CONTROL_URBS; ++i) {
- if (bluetooth->control_urb_pool[i]->status != -EINPROGRESS) {
- urb = bluetooth->control_urb_pool[i];
- dr = &bluetooth->dr[i];
- break;
- }
- }
- if (urb == NULL) {
- dbg ("%s - no free urbs", __FUNCTION__);
- return -ENOMEM;
- }
-
- /* keep increasing the urb transfer buffer to fit the size of the message */
- if (urb->transfer_buffer == NULL) {
- urb->transfer_buffer = kmalloc (len, GFP_KERNEL);
- if (urb->transfer_buffer == NULL) {
- err ("%s - out of memory", __FUNCTION__);
- return -ENOMEM;
- }
- }
- if (urb->transfer_buffer_length < len) {
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = kmalloc (len, GFP_KERNEL);
- if (urb->transfer_buffer == NULL) {
- err ("%s - out of memory", __FUNCTION__);
- return -ENOMEM;
- }
- }
- memcpy (urb->transfer_buffer, buf, len);
-
- dr->bRequestType= BLUETOOTH_CONTROL_REQUEST_TYPE;
- dr->bRequest = request;
- dr->wValue = cpu_to_le16((u16) value);
- dr->wIndex = cpu_to_le16((u16) bluetooth->control_out_bInterfaceNum);
- dr->wLength = cpu_to_le16((u16) len);
-
- usb_fill_control_urb (urb, bluetooth->dev, usb_sndctrlpipe(bluetooth->dev, 0),
- (unsigned char*)dr, urb->transfer_buffer, len, bluetooth_ctrl_callback, bluetooth);
-
- /* send it down the pipe */
- status = usb_submit_urb(urb, GFP_KERNEL);
- if (status)
- dbg("%s - usb_submit_urb(control) failed with status = %d", __FUNCTION__, status);
-
- return status;
-}
-
-
-
-
-
-/*****************************************************************************
- * Driver tty interface functions
- *****************************************************************************/
-static int bluetooth_open (struct tty_struct *tty, struct file * filp)
-{
- struct usb_bluetooth *bluetooth;
- int result;
-
- dbg("%s", __FUNCTION__);
-
- /* initialize the pointer incase something fails */
- tty->driver_data = NULL;
-
- /* get the bluetooth object associated with this tty pointer */
- bluetooth = get_bluetooth_by_index (tty->index);
-
- if (bluetooth_paranoia_check (bluetooth, __FUNCTION__)) {
- return -ENODEV;
- }
-
- down (&bluetooth->lock);
-
- ++bluetooth->open_count;
- if (bluetooth->open_count == 1) {
- /* set up our structure making the tty driver remember our object, and us it */
- tty->driver_data = bluetooth;
- bluetooth->tty = tty;
-
- /* force low_latency on so that our tty_push actually forces the data through,
- * otherwise it is scheduled, and with high data rates (like with OHCI) data
- * can get lost. */
- bluetooth->tty->low_latency = 1;
-
- /* Reset the packet position counters */
- bluetooth->int_packet_pos = 0;
- bluetooth->bulk_packet_pos = 0;
-
-#ifndef BTBUGGYHARDWARE
- /* Start reading from the device */
- usb_fill_bulk_urb (bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer,
- bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
- if (result)
- dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
-#endif
- usb_fill_int_urb (bluetooth->interrupt_in_urb, bluetooth->dev,
- usb_rcvintpipe(bluetooth->dev, bluetooth->interrupt_in_endpointAddress),
- bluetooth->interrupt_in_buffer,
- bluetooth->interrupt_in_buffer_size,
- bluetooth_int_callback, bluetooth,
- bluetooth->interrupt_in_interval);
- result = usb_submit_urb(bluetooth->interrupt_in_urb, GFP_KERNEL);
- if (result)
- dbg("%s - usb_submit_urb(interrupt in) failed with status %d", __FUNCTION__, result);
- }
-
- up(&bluetooth->lock);
-
- return 0;
-}
-
-
-static void bluetooth_close (struct tty_struct *tty, struct file * filp)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not opened", __FUNCTION__);
- return;
- }
-
- down (&bluetooth->lock);
-
- --bluetooth->open_count;
- if (bluetooth->open_count <= 0) {
- bluetooth->open_count = 0;
-
- /* shutdown any in-flight urbs that we know about */
- usb_kill_urb (bluetooth->read_urb);
- usb_kill_urb (bluetooth->interrupt_in_urb);
- }
- up(&bluetooth->lock);
-}
-
-
-static int bluetooth_write (struct tty_struct * tty, const unsigned char *buf, int count)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
- struct urb *urb = NULL;
- unsigned char *temp_buffer = NULL;
- const unsigned char *current_buffer;
- unsigned char *urb_buffer;
- int i;
- int retval = 0;
-
- if (!bluetooth) {
- return -ENODEV;
- }
-
- dbg("%s - %d byte(s)", __FUNCTION__, count);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not opened", __FUNCTION__);
- return -EINVAL;
- }
-
- if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
- return 0;
- }
- if (count == 1) {
- dbg("%s - write request only included type %d", __FUNCTION__, buf[0]);
- return 1;
- }
-
-#ifdef DEBUG
- printk (KERN_DEBUG __FILE__ ": %s - length = %d, data = ", __FUNCTION__, count);
- for (i = 0; i < count; ++i) {
- printk ("%.2x ", buf[i]);
- }
- printk ("\n");
-#endif
-
- current_buffer = buf;
-
- switch (*current_buffer) {
- /* First byte indicates the type of packet */
- case CMD_PKT:
- /* dbg("%s- Send cmd_pkt len:%d", __FUNCTION__, count);*/
-
- retval = bluetooth_ctrl_msg (bluetooth, 0x00, 0x00, ¤t_buffer[1], count-1);
- if (retval) {
- goto exit;
- }
- retval = count;
- break;
-
- case ACL_PKT:
- ++current_buffer;
- --count;
-
- urb_buffer = kmalloc (count, GFP_ATOMIC);
- if (!urb_buffer) {
- dev_err(&bluetooth->dev->dev, "out of memory\n");
- retval = -ENOMEM;
- goto exit;
- }
-
- urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!urb) {
- dev_err(&bluetooth->dev->dev, "no more free urbs\n");
- kfree(urb_buffer);
- retval = -ENOMEM;
- goto exit;
- }
- memcpy (urb_buffer, current_buffer, count);
-
- /* build up our urb */
- usb_fill_bulk_urb(urb, bluetooth->dev,
- usb_sndbulkpipe(bluetooth->dev,
- bluetooth->bulk_out_endpointAddress),
- urb_buffer,
- count,
- bluetooth_write_bulk_callback,
- bluetooth);
-
-
- /* send it down the pipe */
- retval = usb_submit_urb(urb, GFP_KERNEL);
- if (retval) {
- dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, retval);
- goto exit;
- }
-
- /* we are done with this urb, so let the host driver
- * really free it when it is finished with it */
- usb_free_urb (urb);
- retval = count + 1;
- break;
-
- default :
- dbg("%s - unsupported (at this time) write type", __FUNCTION__);
- retval = -EINVAL;
- break;
- }
-
-exit:
- kfree(temp_buffer);
-
- return retval;
-}
-
-
-static int bluetooth_write_room (struct tty_struct *tty)
-{
- dbg("%s", __FUNCTION__);
-
- /*
- * We really can take anything the user throws at us
- * but let's pick a nice big number to tell the tty
- * layer that we have lots of free space
- */
- return 2048;
-}
-
-
-static int bluetooth_chars_in_buffer (struct tty_struct *tty)
-{
- dbg("%s", __FUNCTION__);
-
- /*
- * We can't really account for how much data we
- * have sent out, but hasn't made it through to the
- * device, so just tell the tty layer that everything
- * is flushed.
- */
- return 0;
-}
-
-
-static void bluetooth_throttle (struct tty_struct * tty)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- dbg("%s unsupported (at this time)", __FUNCTION__);
-
- return;
-}
-
-
-static void bluetooth_unthrottle (struct tty_struct * tty)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- dbg("%s unsupported (at this time)", __FUNCTION__);
-}
-
-
-static int bluetooth_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return -ENODEV;
- }
-
- dbg("%s - cmd 0x%.4x", __FUNCTION__, cmd);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return -ENODEV;
- }
-
- /* FIXME!!! */
- return -ENOIOCTLCMD;
-}
-
-
-static void bluetooth_set_termios (struct tty_struct *tty, struct termios * old)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- /* FIXME!!! */
-
- return;
-}
-
-
-#ifdef BTBUGGYHARDWARE
-void btusb_enable_bulk_read(struct tty_struct *tty){
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
- int result;
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- if (bluetooth->read_urb) {
- usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
- if (result)
- err ("%s - failed submitting read urb, error %d", __FUNCTION__, result);
- }
-}
-
-void btusb_disable_bulk_read(struct tty_struct *tty){
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- if ((bluetooth->read_urb) && (bluetooth->read_urb->actual_length))
- usb_kill_urb(bluetooth->read_urb);
-}
-#endif
-
-
-/*****************************************************************************
- * urb callback functions
- *****************************************************************************/
-
-
-static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
- unsigned char *data = urb->transfer_buffer;
- unsigned int i;
- unsigned int count = urb->actual_length;
- unsigned int packet_size;
- int status;
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth) {
- dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
- return;
- }
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- goto exit;
- }
-
- if (!count) {
- dbg("%s - zero length int", __FUNCTION__);
- goto exit;
- }
-
-
-#ifdef DEBUG
- if (count) {
- printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count);
- for (i = 0; i < count; ++i) {
- printk ("%.2x ", data[i]);
- }
- printk ("\n");
- }
-#endif
-
-#ifdef BTBUGGYHARDWARE
- if ((count >= 2) && (data[0] == 0xFF) && (data[1] == 0x00)) {
- data += 2;
- count -= 2;
- }
- if (count == 0) {
- urb->actual_length = 0;
- goto exit;
- }
-#endif
- /* We add a packet type identifier to the beginning of each
- HCI frame. This makes the data in the tty look like a
- serial USB devices. Each HCI frame can be broken across
- multiple URBs so we buffer them until we have a full hci
- packet */
-
- if (!bluetooth->int_packet_pos) {
- bluetooth->int_buffer[0] = EVENT_PKT;
- bluetooth->int_packet_pos++;
- }
-
- if (bluetooth->int_packet_pos + count > EVENT_BUFFER_SIZE) {
- err("%s - exceeded EVENT_BUFFER_SIZE", __FUNCTION__);
- bluetooth->int_packet_pos = 0;
- goto exit;
- }
-
- memcpy (&bluetooth->int_buffer[bluetooth->int_packet_pos],
- urb->transfer_buffer, count);
- bluetooth->int_packet_pos += count;
- urb->actual_length = 0;
-
- if (bluetooth->int_packet_pos >= EVENT_HDR_SIZE)
- packet_size = bluetooth->int_buffer[2];
- else
- goto exit;
-
- if (packet_size + EVENT_HDR_SIZE < bluetooth->int_packet_pos) {
- err("%s - packet was too long", __FUNCTION__);
- bluetooth->int_packet_pos = 0;
- goto exit;
- }
-
- if (packet_size + EVENT_HDR_SIZE == bluetooth->int_packet_pos) {
- for (i = 0; i < bluetooth->int_packet_pos; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them */
- if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(bluetooth->tty);
- }
- tty_insert_flip_char(bluetooth->tty, bluetooth->int_buffer[i], 0);
- }
- tty_flip_buffer_push(bluetooth->tty);
-
- bluetooth->int_packet_pos = 0;
- }
-
-exit:
- status = usb_submit_urb (urb, GFP_ATOMIC);
- if (status)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
-}
-
-
-static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth) {
- dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
- return;
- }
-
- if (urb->status) {
- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
- return;
- }
-}
-
-
-static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
- unsigned char *data = urb->transfer_buffer;
- unsigned int count = urb->actual_length;
- unsigned int i;
- unsigned int packet_size;
- int result;
-
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth) {
- dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
- return;
- }
-
- if (urb->status) {
- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
- if (urb->status == -ENOENT) {
- dbg("%s - URB canceled, won't reschedule", __FUNCTION__);
- return;
- }
- goto exit;
- }
-
- if (!count) {
- dbg("%s - zero length read bulk", __FUNCTION__);
- goto exit;
- }
-
-#ifdef DEBUG
- if (count) {
- printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count);
- for (i = 0; i < count; ++i) {
- printk ("%.2x ", data[i]);
- }
- printk ("\n");
- }
-#endif
-#ifdef BTBUGGYHARDWARE
- if ((count == 4) && (data[0] == 0x00) && (data[1] == 0x00)
- && (data[2] == 0x00) && (data[3] == 0x00)) {
- urb->actual_length = 0;
- usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
- if (result)
- err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
-
- return;
- }
-#endif
- /* We add a packet type identifier to the beginning of each
- HCI frame. This makes the data in the tty look like a
- serial USB devices. Each HCI frame can be broken across
- multiple URBs so we buffer them until we have a full hci
- packet */
-
- if (!bluetooth->bulk_packet_pos) {
- bluetooth->bulk_buffer[0] = ACL_PKT;
- bluetooth->bulk_packet_pos++;
- }
-
- if (bluetooth->bulk_packet_pos + count > ACL_BUFFER_SIZE) {
- err("%s - exceeded ACL_BUFFER_SIZE", __FUNCTION__);
- bluetooth->bulk_packet_pos = 0;
- goto exit;
- }
-
- memcpy (&bluetooth->bulk_buffer[bluetooth->bulk_packet_pos],
- urb->transfer_buffer, count);
- bluetooth->bulk_packet_pos += count;
- urb->actual_length = 0;
-
- if (bluetooth->bulk_packet_pos >= ACL_HDR_SIZE) {
- packet_size = CHAR2INT16(bluetooth->bulk_buffer[4],bluetooth->bulk_buffer[3]);
- } else {
- goto exit;
- }
-
- if (packet_size + ACL_HDR_SIZE < bluetooth->bulk_packet_pos) {
- err("%s - packet was too long", __FUNCTION__);
- bluetooth->bulk_packet_pos = 0;
- goto exit;
- }
-
- if (packet_size + ACL_HDR_SIZE == bluetooth->bulk_packet_pos) {
- for (i = 0; i < bluetooth->bulk_packet_pos; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(bluetooth->tty);
- }
- tty_insert_flip_char(bluetooth->tty, bluetooth->bulk_buffer[i], 0);
- }
- tty_flip_buffer_push(bluetooth->tty);
- bluetooth->bulk_packet_pos = 0;
- }
-
-exit:
- if (!bluetooth || !bluetooth->open_count)
- return;
-
- usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
- if (result)
- err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
-
- return;
-}
-
-
-static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
-
- dbg("%s", __FUNCTION__);
-
- /* free up the transfer buffer, as usb_free_urb() does not do this */
- kfree(urb->transfer_buffer);
-
- if (!bluetooth) {
- dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
- return;
- }
-
- if (urb->status) {
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
- return;
- }
-
- /* wake up our little function to let the tty layer know that something happened */
- schedule_work(&bluetooth->work);
-}
-
-
-static void bluetooth_softint(void *private)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)private, __FUNCTION__);
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth)
- return;
-
- tty_wakeup(bluetooth->tty);
-}
-
-
-static int usb_bluetooth_probe (struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev (intf);
- struct usb_bluetooth *bluetooth = NULL;
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_endpoint_descriptor *interrupt_in_endpoint[8];
- struct usb_endpoint_descriptor *bulk_in_endpoint[8];
- struct usb_endpoint_descriptor *bulk_out_endpoint[8];
- int control_out_endpoint;
-
- int minor;
- int buffer_size;
- int i;
- int num_interrupt_in = 0;
- int num_bulk_in = 0;
- int num_bulk_out = 0;
-
- interface = intf->cur_altsetting;
- control_out_endpoint = interface->desc.bInterfaceNumber;
-
- /* find the endpoints that we need */
- for (i = 0; i < interface->desc.bNumEndpoints; ++i) {
- endpoint = &interface->endpoint[i].desc;
-
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
- /* we found a bulk in endpoint */
- dbg("found bulk in");
- bulk_in_endpoint[num_bulk_in] = endpoint;
- ++num_bulk_in;
- }
-
- if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
- /* we found a bulk out endpoint */
- dbg("found bulk out");
- bulk_out_endpoint[num_bulk_out] = endpoint;
- ++num_bulk_out;
- }
-
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x03)) {
- /* we found a interrupt in endpoint */
- dbg("found interrupt in");
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
- }
- }
-
- /* according to the spec, we can only have 1 bulk_in, 1 bulk_out, and 1 interrupt_in endpoints */
- if ((num_bulk_in != 1) ||
- (num_bulk_out != 1) ||
- (num_interrupt_in != 1)) {
- dbg ("%s - improper number of endpoints. Bluetooth driver not bound.", __FUNCTION__);
- return -EIO;
- }
-
- info("USB Bluetooth converter detected");
-
- for (minor = 0; minor < BLUETOOTH_TTY_MINORS && bluetooth_table[minor]; ++minor)
- ;
- if (bluetooth_table[minor]) {
- err("No more free Bluetooth devices");
- return -ENODEV;
- }
-
- if (!(bluetooth = kmalloc(sizeof(struct usb_bluetooth), GFP_KERNEL))) {
- err("Out of memory");
- return -ENOMEM;
- }
-
- memset(bluetooth, 0, sizeof(struct usb_bluetooth));
-
- bluetooth->magic = USB_BLUETOOTH_MAGIC;
- bluetooth->dev = dev;
- bluetooth->minor = minor;
- INIT_WORK(&bluetooth->work, bluetooth_softint, bluetooth);
- init_MUTEX(&bluetooth->lock);
-
- /* record the interface number for the control out */
- bluetooth->control_out_bInterfaceNum = control_out_endpoint;
-
- /* create our control out urb pool */
- for (i = 0; i < NUM_CONTROL_URBS; ++i) {
- struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
- if (urb == NULL) {
- err("No free urbs available");
- goto probe_error;
- }
- urb->transfer_buffer = NULL;
- bluetooth->control_urb_pool[i] = urb;
- }
-
- /* set up the endpoint information */
- endpoint = bulk_in_endpoint[0];
- bluetooth->read_urb = usb_alloc_urb (0, GFP_KERNEL);
- if (!bluetooth->read_urb) {
- err("No free urbs available");
- goto probe_error;
- }
- bluetooth->bulk_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
- bluetooth->bulk_in_endpointAddress = endpoint->bEndpointAddress;
- bluetooth->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
- if (!bluetooth->bulk_in_buffer) {
- err("Couldn't allocate bulk_in_buffer");
- goto probe_error;
- }
- usb_fill_bulk_urb(bluetooth->read_urb, dev, usb_rcvbulkpipe(dev, endpoint->bEndpointAddress),
- bluetooth->bulk_in_buffer, buffer_size, bluetooth_read_bulk_callback, bluetooth);
-
- endpoint = bulk_out_endpoint[0];
- bluetooth->bulk_out_endpointAddress = endpoint->bEndpointAddress;
- bluetooth->bulk_out_buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
-
- endpoint = interrupt_in_endpoint[0];
- bluetooth->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!bluetooth->interrupt_in_urb) {
- err("No free urbs available");
- goto probe_error;
- }
- bluetooth->interrupt_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
- bluetooth->interrupt_in_endpointAddress = endpoint->bEndpointAddress;
- bluetooth->interrupt_in_interval = endpoint->bInterval;
- bluetooth->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
- if (!bluetooth->interrupt_in_buffer) {
- err("Couldn't allocate interrupt_in_buffer");
- goto probe_error;
- }
- usb_fill_int_urb(bluetooth->interrupt_in_urb, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress),
- bluetooth->interrupt_in_buffer, buffer_size, bluetooth_int_callback,
- bluetooth, endpoint->bInterval);
-
- /* initialize the devfs nodes for this device and let the user know what bluetooths we are bound to */
- tty_register_device (bluetooth_tty_driver, minor, &intf->dev);
- info("Bluetooth converter now attached to ttyUB%d (or usb/ttub/%d for devfs)", minor, minor);
-
- bluetooth_table[minor] = bluetooth;
-
- /* success */
- usb_set_intfdata (intf, bluetooth);
- return 0;
-
-probe_error:
- if (bluetooth->read_urb)
- usb_free_urb (bluetooth->read_urb);
- if (bluetooth->bulk_in_buffer)
- kfree (bluetooth->bulk_in_buffer);
- if (bluetooth->interrupt_in_urb)
- usb_free_urb (bluetooth->interrupt_in_urb);
- if (bluetooth->interrupt_in_buffer)
- kfree (bluetooth->interrupt_in_buffer);
- for (i = 0; i < NUM_CONTROL_URBS; ++i)
- if (bluetooth->control_urb_pool[i]) {
- if (bluetooth->control_urb_pool[i]->transfer_buffer)
- kfree (bluetooth->control_urb_pool[i]->transfer_buffer);
- usb_free_urb (bluetooth->control_urb_pool[i]);
- }
-
- bluetooth_table[minor] = NULL;
-
- /* free up any memory that we allocated */
- kfree (bluetooth);
- return -EIO;
-}
-
-
-static void usb_bluetooth_disconnect(struct usb_interface *intf)
-{
- struct usb_bluetooth *bluetooth = usb_get_intfdata (intf);
- int i;
-
- usb_set_intfdata (intf, NULL);
- if (bluetooth) {
- if ((bluetooth->open_count) && (bluetooth->tty))
- tty_hangup(bluetooth->tty);
-
- bluetooth->open_count = 0;
-
- if (bluetooth->read_urb) {
- usb_kill_urb (bluetooth->read_urb);
- usb_free_urb (bluetooth->read_urb);
- }
- if (bluetooth->bulk_in_buffer)
- kfree (bluetooth->bulk_in_buffer);
-
- if (bluetooth->interrupt_in_urb) {
- usb_kill_urb (bluetooth->interrupt_in_urb);
- usb_free_urb (bluetooth->interrupt_in_urb);
- }
- if (bluetooth->interrupt_in_buffer)
- kfree (bluetooth->interrupt_in_buffer);
-
- tty_unregister_device (bluetooth_tty_driver, bluetooth->minor);
-
- for (i = 0; i < NUM_CONTROL_URBS; ++i) {
- if (bluetooth->control_urb_pool[i]) {
- usb_kill_urb (bluetooth->control_urb_pool[i]);
- if (bluetooth->control_urb_pool[i]->transfer_buffer)
- kfree (bluetooth->control_urb_pool[i]->transfer_buffer);
- usb_free_urb (bluetooth->control_urb_pool[i]);
- }
- }
-
- info("Bluetooth converter now disconnected from ttyUB%d", bluetooth->minor);
-
- bluetooth_table[bluetooth->minor] = NULL;
-
- /* free up any memory that we allocated */
- kfree (bluetooth);
- } else {
- info("device disconnected");
- }
-}
-
-static struct tty_operations bluetooth_ops = {
- .open = bluetooth_open,
- .close = bluetooth_close,
- .write = bluetooth_write,
- .write_room = bluetooth_write_room,
- .ioctl = bluetooth_ioctl,
- .set_termios = bluetooth_set_termios,
- .throttle = bluetooth_throttle,
- .unthrottle = bluetooth_unthrottle,
- .chars_in_buffer = bluetooth_chars_in_buffer,
-};
-
-static int usb_bluetooth_init(void)
-{
- int i;
- int result;
-
- /* Initialize our global data */
- for (i = 0; i < BLUETOOTH_TTY_MINORS; ++i) {
- bluetooth_table[i] = NULL;
- }
-
- info ("USB Bluetooth support registered");
-
- bluetooth_tty_driver = alloc_tty_driver(BLUETOOTH_TTY_MINORS);
- if (!bluetooth_tty_driver)
- return -ENOMEM;
-
- bluetooth_tty_driver->owner = THIS_MODULE;
- bluetooth_tty_driver->driver_name = "usb-bluetooth";
- bluetooth_tty_driver->name = "ttyUB";
- bluetooth_tty_driver->devfs_name = "usb/ttub/";
- bluetooth_tty_driver->major = BLUETOOTH_TTY_MAJOR;
- bluetooth_tty_driver->minor_start = 0;
- bluetooth_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- bluetooth_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- bluetooth_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
- bluetooth_tty_driver->init_termios = tty_std_termios;
- bluetooth_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- tty_set_operations(bluetooth_tty_driver, &bluetooth_ops);
- if (tty_register_driver (bluetooth_tty_driver)) {
- err("%s - failed to register tty driver", __FUNCTION__);
- put_tty_driver(bluetooth_tty_driver);
- return -1;
- }
-
- /* register the USB driver */
- result = usb_register(&usb_bluetooth_driver);
- if (result < 0) {
- tty_unregister_driver(bluetooth_tty_driver);
- put_tty_driver(bluetooth_tty_driver);
- err("usb_register failed for the USB bluetooth driver. Error number %d", result);
- return -1;
- }
-
- info(DRIVER_DESC " " DRIVER_VERSION);
-
- return 0;
-}
-
-
-static void usb_bluetooth_exit(void)
-{
- usb_deregister(&usb_bluetooth_driver);
- tty_unregister_driver(bluetooth_tty_driver);
- put_tty_driver(bluetooth_tty_driver);
-}
-
-
-module_init(usb_bluetooth_init);
-module_exit(usb_bluetooth_exit);
-
-/* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 16ecad3..1b47514 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -827,11 +827,10 @@
return -ENODEV;
}
- if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (acm kmalloc)\n");
+ if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
+ dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
goto alloc_fail;
}
- memset(acm, 0, sizeof(struct acm));
ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
readsize = le16_to_cpu(epread->wMaxPacketSize);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index e195709..357e753 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -844,9 +844,8 @@
};
static struct usb_class_driver usblp_class = {
- .name = "usb/lp%d",
+ .name = "lp%d",
.fops = &usblp_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = USBLP_MINOR_BASE,
};
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 1a9ff61..ff03184 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -61,14 +61,17 @@
If you are unsure about this, say N here.
config USB_SUSPEND
- bool "USB suspend/resume (EXPERIMENTAL)"
+ bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)"
depends on USB && PM && EXPERIMENTAL
help
If you say Y here, you can use driver calls or the sysfs
"power/state" file to suspend or resume individual USB
- peripherals. There are many related features, such as
- remote wakeup and driver-specific suspend processing, that
- may not yet work as expected.
+ peripherals.
+
+ Also, USB "remote wakeup" signaling is supported, whereby some
+ USB devices (like keyboards and network adapters) can wake up
+ their parent hub. That wakeup cascades up the USB tree, and
+ could wake the system from states like suspend-to-RAM.
If you are unsure about this, say N here.
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index d5503cf..dd1c4d2 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -3,7 +3,7 @@
#
usbcore-objs := usb.o hub.o hcd.o urb.o message.o \
- config.o file.o buffer.o sysfs.o devio.o
+ config.o file.o buffer.o sysfs.o devio.o notify.o
ifeq ($(CONFIG_PCI),y)
usbcore-objs += hcd-pci.o
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index fc15b4a..57e800a 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -106,7 +106,7 @@
void *hcd_buffer_alloc (
struct usb_bus *bus,
size_t size,
- unsigned mem_flags,
+ gfp_t mem_flags,
dma_addr_t *dma
)
{
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 99595e0..9930195 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -112,8 +112,12 @@
struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref);
int j;
- for (j = 0; j < intfc->num_altsetting; j++)
- kfree(intfc->altsetting[j].endpoint);
+ for (j = 0; j < intfc->num_altsetting; j++) {
+ struct usb_host_interface *alt = &intfc->altsetting[j];
+
+ kfree(alt->endpoint);
+ kfree(alt->string);
+ }
kfree(intfc);
}
@@ -188,10 +192,9 @@
}
len = sizeof(struct usb_host_endpoint) * num_ep;
- alt->endpoint = kmalloc(len, GFP_KERNEL);
+ alt->endpoint = kzalloc(len, GFP_KERNEL);
if (!alt->endpoint)
return -ENOMEM;
- memset(alt->endpoint, 0, len);
/* Parse all the endpoint descriptors */
n = 0;
@@ -353,10 +356,9 @@
}
len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
- config->intf_cache[i] = intfc = kmalloc(len, GFP_KERNEL);
+ config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
if (!intfc)
return -ENOMEM;
- memset(intfc, 0, len);
kref_init(&intfc->ref);
}
@@ -422,8 +424,6 @@
struct usb_host_config *cf = &dev->config[c];
kfree(cf->string);
- cf->string = NULL;
-
for (i = 0; i < cf->desc.bNumInterfaces; i++) {
if (cf->intf_cache[i])
kref_put(&cf->intf_cache[i]->ref,
@@ -459,16 +459,14 @@
}
length = ncfg * sizeof(struct usb_host_config);
- dev->config = kmalloc(length, GFP_KERNEL);
+ dev->config = kzalloc(length, GFP_KERNEL);
if (!dev->config)
goto err2;
- memset(dev->config, 0, length);
length = ncfg * sizeof(char *);
- dev->rawdescriptors = kmalloc(length, GFP_KERNEL);
+ dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
if (!dev->rawdescriptors)
goto err2;
- memset(dev->rawdescriptors, 0, length);
buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
if (!buffer)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 487ff67..942cd43 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -46,6 +46,7 @@
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/cdev.h>
+#include <linux/notifier.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
#include <linux/moduleparam.h>
@@ -209,10 +210,10 @@
static struct async *alloc_async(unsigned int numisoframes)
{
unsigned int assize = sizeof(struct async) + numisoframes * sizeof(struct usb_iso_packet_descriptor);
- struct async *as = kmalloc(assize, GFP_KERNEL);
+ struct async *as = kzalloc(assize, GFP_KERNEL);
+
if (!as)
return NULL;
- memset(as, 0, assize);
as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL);
if (!as->urb) {
kfree(as);
@@ -279,6 +280,28 @@
return NULL;
}
+static void snoop_urb(struct urb *urb, void __user *userurb)
+{
+ int j;
+ unsigned char *data = urb->transfer_buffer;
+
+ if (!usbfs_snoop)
+ return;
+
+ if (urb->pipe & USB_DIR_IN)
+ dev_info(&urb->dev->dev, "direction=IN\n");
+ else
+ dev_info(&urb->dev->dev, "direction=OUT\n");
+ dev_info(&urb->dev->dev, "userurb=%p\n", userurb);
+ dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n",
+ urb->transfer_buffer_length);
+ dev_info(&urb->dev->dev, "actual_length=%d\n", urb->actual_length);
+ dev_info(&urb->dev->dev, "data: ");
+ for (j = 0; j < urb->transfer_buffer_length; ++j)
+ printk ("%02x ", data[j]);
+ printk("\n");
+}
+
static void async_completed(struct urb *urb, struct pt_regs *regs)
{
struct async *as = (struct async *)urb->context;
@@ -296,7 +319,9 @@
kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
as->euid);
}
- wake_up(&ps->wait);
+ snoop(&urb->dev->dev, "urb complete\n");
+ snoop_urb(urb, as->userurb);
+ wake_up(&ps->wait);
}
static void destroy_async (struct dev_state *ps, struct list_head *list)
@@ -493,6 +518,23 @@
return ret;
}
+static struct usb_device *usbdev_lookup_minor(int minor)
+{
+ struct class_device *class_dev;
+ struct usb_device *dev = NULL;
+
+ down(&usb_device_class->sem);
+ list_for_each_entry(class_dev, &usb_device_class->children, node) {
+ if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
+ dev = class_dev->class_data;
+ break;
+ }
+ }
+ up(&usb_device_class->sem);
+
+ return dev;
+};
+
/*
* file operations
*/
@@ -601,7 +643,7 @@
if (usbfs_snoop) {
dev_info(&dev->dev, "control read: data ");
for (j = 0; j < i; ++j)
- printk ("%02x ", (unsigned char)(tbuf)[j]);
+ printk("%02x ", (unsigned char)(tbuf)[j]);
printk("\n");
}
if (copy_to_user(ctrl.data, tbuf, i)) {
@@ -624,7 +666,7 @@
if (usbfs_snoop) {
dev_info(&dev->dev, "control write: data: ");
for (j = 0; j < ctrl.wLength; ++j)
- printk ("%02x ", (unsigned char)(tbuf)[j]);
+ printk("%02x ", (unsigned char)(tbuf)[j]);
printk("\n");
}
usb_unlock_device(dev);
@@ -649,7 +691,7 @@
unsigned int tmo, len1, pipe;
int len2;
unsigned char *tbuf;
- int i, ret;
+ int i, j, ret;
if (copy_from_user(&bulk, arg, sizeof(bulk)))
return -EFAULT;
@@ -674,10 +716,18 @@
kfree(tbuf);
return -EINVAL;
}
+ snoop(&dev->dev, "bulk read: len=0x%02x timeout=%04d\n",
+ bulk.len, bulk.timeout);
usb_unlock_device(dev);
i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
usb_lock_device(dev);
if (!i && len2) {
+ if (usbfs_snoop) {
+ dev_info(&dev->dev, "bulk read: data ");
+ for (j = 0; j < len2; ++j)
+ printk("%02x ", (unsigned char)(tbuf)[j]);
+ printk("\n");
+ }
if (copy_to_user(bulk.data, tbuf, len2)) {
kfree(tbuf);
return -EFAULT;
@@ -690,6 +740,14 @@
return -EFAULT;
}
}
+ snoop(&dev->dev, "bulk write: len=0x%02x timeout=%04d\n",
+ bulk.len, bulk.timeout);
+ if (usbfs_snoop) {
+ dev_info(&dev->dev, "bulk write: data: ");
+ for (j = 0; j < len1; ++j)
+ printk("%02x ", (unsigned char)(tbuf)[j]);
+ printk("\n");
+ }
usb_unlock_device(dev);
i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
usb_lock_device(dev);
@@ -835,7 +893,6 @@
return status;
}
-
static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
struct usbdevfs_iso_packet_desc __user *iso_frame_desc,
void __user *arg)
@@ -896,6 +953,7 @@
kfree(dr);
return -EFAULT;
}
+ snoop(&ps->dev->dev, "control urb\n");
break;
case USBDEVFS_URB_TYPE_BULK:
@@ -910,6 +968,7 @@
return -EINVAL;
if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
return -EFAULT;
+ snoop(&ps->dev->dev, "bulk urb\n");
break;
case USBDEVFS_URB_TYPE_ISO:
@@ -939,6 +998,7 @@
return -EINVAL;
}
uurb->buffer_length = totlen;
+ snoop(&ps->dev->dev, "iso urb\n");
break;
case USBDEVFS_URB_TYPE_INTERRUPT:
@@ -954,6 +1014,7 @@
return -EINVAL;
if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
return -EFAULT;
+ snoop(&ps->dev->dev, "interrupt urb\n");
break;
default:
@@ -1003,6 +1064,8 @@
return -EFAULT;
}
}
+ snoop(&as->urb->dev->dev, "submit urb\n");
+ snoop_urb(as->urb, as->userurb);
async_newpending(as);
if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) {
dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret);
@@ -1238,23 +1301,20 @@
return 0;
}
-static int proc_ioctl (struct dev_state *ps, void __user *arg)
+static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
{
- struct usbdevfs_ioctl ctrl;
int size;
void *buf = NULL;
int retval = 0;
struct usb_interface *intf = NULL;
struct usb_driver *driver = NULL;
- /* get input parameters and alloc buffer */
- if (copy_from_user(&ctrl, arg, sizeof (ctrl)))
- return -EFAULT;
- if ((size = _IOC_SIZE (ctrl.ioctl_code)) > 0) {
+ /* alloc buffer */
+ if ((size = _IOC_SIZE (ctl->ioctl_code)) > 0) {
if ((buf = kmalloc (size, GFP_KERNEL)) == NULL)
return -ENOMEM;
- if ((_IOC_DIR(ctrl.ioctl_code) & _IOC_WRITE)) {
- if (copy_from_user (buf, ctrl.data, size)) {
+ if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) {
+ if (copy_from_user (buf, ctl->data, size)) {
kfree(buf);
return -EFAULT;
}
@@ -1270,9 +1330,9 @@
if (ps->dev->state != USB_STATE_CONFIGURED)
retval = -EHOSTUNREACH;
- else if (!(intf = usb_ifnum_to_if (ps->dev, ctrl.ifno)))
+ else if (!(intf = usb_ifnum_to_if (ps->dev, ctl->ifno)))
retval = -EINVAL;
- else switch (ctrl.ioctl_code) {
+ else switch (ctl->ioctl_code) {
/* disconnect kernel driver from interface */
case USBDEVFS_DISCONNECT:
@@ -1304,7 +1364,7 @@
if (driver == NULL || driver->ioctl == NULL) {
retval = -ENOTTY;
} else {
- retval = driver->ioctl (intf, ctrl.ioctl_code, buf);
+ retval = driver->ioctl (intf, ctl->ioctl_code, buf);
if (retval == -ENOIOCTLCMD)
retval = -ENOTTY;
}
@@ -1313,15 +1373,42 @@
/* cleanup and return */
if (retval >= 0
- && (_IOC_DIR (ctrl.ioctl_code) & _IOC_READ) != 0
+ && (_IOC_DIR (ctl->ioctl_code) & _IOC_READ) != 0
&& size > 0
- && copy_to_user (ctrl.data, buf, size) != 0)
+ && copy_to_user (ctl->data, buf, size) != 0)
retval = -EFAULT;
kfree(buf);
return retval;
}
+static int proc_ioctl_default(struct dev_state *ps, void __user *arg)
+{
+ struct usbdevfs_ioctl ctrl;
+
+ if (copy_from_user(&ctrl, arg, sizeof (ctrl)))
+ return -EFAULT;
+ return proc_ioctl(ps, &ctrl);
+}
+
+#ifdef CONFIG_COMPAT
+static int proc_ioctl_compat(struct dev_state *ps, void __user *arg)
+{
+ struct usbdevfs_ioctl32 __user *uioc;
+ struct usbdevfs_ioctl ctrl;
+ u32 udata;
+
+ uioc = compat_ptr(arg);
+ if (get_user(ctrl.ifno, &uioc->ifno) ||
+ get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
+ __get_user(udata, &uioc->data))
+ return -EFAULT;
+ ctrl.data = compat_ptr(udata);
+
+ return proc_ioctl(ps, &ctrl);
+}
+#endif
+
/*
* NOTE: All requests here that have interface numbers as parameters
* are assuming that somehow the configuration has been prevented from
@@ -1422,6 +1509,10 @@
ret = proc_reapurbnonblock_compat(ps, p);
break;
+ case USBDEVFS_IOCTL32:
+ snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
+ ret = proc_ioctl_compat(ps, p);
+ break;
#endif
case USBDEVFS_DISCARDURB:
@@ -1456,7 +1547,7 @@
case USBDEVFS_IOCTL:
snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
- ret = proc_ioctl(ps, p);
+ ret = proc_ioctl_default(ps, p);
break;
}
usb_unlock_device(dev);
@@ -1488,39 +1579,40 @@
.release = usbdev_release,
};
-struct usb_device *usbdev_lookup_minor(int minor)
-{
- struct class_device *class_dev;
- struct usb_device *dev = NULL;
-
- down(&usb_device_class->sem);
- list_for_each_entry(class_dev, &usb_device_class->children, node) {
- if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
- dev = class_dev->class_data;
- break;
- }
- }
- up(&usb_device_class->sem);
-
- return dev;
-};
-
-void usbdev_add(struct usb_device *dev)
+static void usbdev_add(struct usb_device *dev)
{
int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
- dev->class_dev = class_device_create(usb_device_class,
+ dev->class_dev = class_device_create(usb_device_class, NULL,
MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev,
"usbdev%d.%d", dev->bus->busnum, dev->devnum);
dev->class_dev->class_data = dev;
}
-void usbdev_remove(struct usb_device *dev)
+static void usbdev_remove(struct usb_device *dev)
{
class_device_unregister(dev->class_dev);
}
+static int usbdev_notify(struct notifier_block *self, unsigned long action,
+ void *dev)
+{
+ switch (action) {
+ case USB_DEVICE_ADD:
+ usbdev_add(dev);
+ break;
+ case USB_DEVICE_REMOVE:
+ usbdev_remove(dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block usbdev_nb = {
+ .notifier_call = usbdev_notify,
+};
+
static struct cdev usb_device_cdev = {
.kobj = {.name = "usb_device", },
.owner = THIS_MODULE,
@@ -1540,24 +1632,32 @@
retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX);
if (retval) {
err("unable to get usb_device major %d", USB_DEVICE_MAJOR);
- unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
- goto out;
+ goto error_cdev;
}
usb_device_class = class_create(THIS_MODULE, "usb_device");
if (IS_ERR(usb_device_class)) {
err("unable to register usb_device class");
retval = PTR_ERR(usb_device_class);
- usb_device_class = NULL;
- cdev_del(&usb_device_cdev);
- unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+ goto error_class;
}
+ usb_register_notify(&usbdev_nb);
+
out:
return retval;
+
+error_class:
+ usb_device_class = NULL;
+ cdev_del(&usb_device_cdev);
+
+error_cdev:
+ unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+ goto out;
}
void usbdev_cleanup(void)
{
+ usb_unregister_notify(&usbdev_nb);
class_destroy(usb_device_class);
cdev_del(&usb_device_cdev);
unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 65ca131..e695308 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -17,7 +17,6 @@
#include <linux/config.h>
#include <linux/module.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
@@ -88,8 +87,6 @@
goto out;
}
- devfs_mk_dir("usb");
-
out:
return error;
}
@@ -97,7 +94,6 @@
void usb_major_cleanup(void)
{
class_destroy(usb_class);
- devfs_remove("usb");
unregister_chrdev(USB_MAJOR, "usb");
}
@@ -112,8 +108,7 @@
* enabled, the minor number will be based on the next available free minor,
* starting at the class_driver->minor_base.
*
- * This function also creates the devfs file for the usb device, if devfs
- * is enabled, and creates a usb class device in the sysfs tree.
+ * This function also creates a usb class device in the sysfs tree.
*
* usb_deregister_dev() must be called when the driver is done with
* the minor numbers given out by this function.
@@ -162,22 +157,20 @@
intf->minor = minor;
- /* handle the devfs registration */
- snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base);
- devfs_mk_cdev(MKDEV(USB_MAJOR, minor), class_driver->mode, name);
-
/* create a usb class device for this usb interface */
+ snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base);
temp = strrchr(name, '/');
if (temp && (temp[1] != 0x00))
++temp;
else
temp = name;
- intf->class_dev = class_device_create(usb_class, MKDEV(USB_MAJOR, minor), &intf->dev, "%s", temp);
+ intf->class_dev = class_device_create(usb_class, NULL,
+ MKDEV(USB_MAJOR, minor),
+ &intf->dev, "%s", temp);
if (IS_ERR(intf->class_dev)) {
spin_lock (&minor_lock);
usb_minors[intf->minor] = NULL;
spin_unlock (&minor_lock);
- devfs_remove (name);
retval = PTR_ERR(intf->class_dev);
}
exit:
@@ -195,9 +188,8 @@
* call to usb_register_dev() (usually when the device is disconnected
* from the system.)
*
- * This function also cleans up the devfs file for the usb device, if devfs
- * is enabled, and removes the usb class device from the sysfs tree.
- *
+ * This function also removes the usb class device from the sysfs tree.
+ *
* This should be called by all drivers that use the USB major number.
*/
void usb_deregister_dev(struct usb_interface *intf,
@@ -220,7 +212,6 @@
spin_unlock (&minor_lock);
snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base);
- devfs_remove (name);
class_device_destroy(usb_class, MKDEV(USB_MAJOR, intf->minor));
intf->class_dev = NULL;
intf->minor = -1;
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 6385d1a..84d9e69 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -30,6 +30,8 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/usb.h>
+
+#include "usb.h"
#include "hcd.h"
@@ -197,6 +199,26 @@
hcd = pci_get_drvdata(dev);
+ /* Root hub suspend should have stopped all downstream traffic,
+ * and all bus master traffic. And done so for both the interface
+ * and the stub usb_device (which we check here). But maybe it
+ * didn't; writing sysfs power/state files ignores such rules...
+ *
+ * We must ignore the FREEZE vs SUSPEND distinction here, because
+ * otherwise the swsusp will save (and restore) garbage state.
+ */
+ if (hcd->self.root_hub->dev.power.power_state.event == PM_EVENT_ON)
+ return -EBUSY;
+
+ if (hcd->driver->suspend) {
+ retval = hcd->driver->suspend(hcd, message);
+ if (retval) {
+ dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n",
+ retval);
+ goto done;
+ }
+ }
+
/* FIXME until the generic PM interfaces change a lot more, this
* can't use PCI D1 and D2 states. For example, the confusion
* between messages and states will need to vanish, and messages
@@ -215,31 +237,13 @@
*/
has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- switch (hcd->state) {
-
- /* entry if root hub wasn't yet suspended ... from sysfs,
- * without autosuspend, or if USB_SUSPEND isn't configured.
+ /* Downstream ports from this root hub should already be quiesced, so
+ * there will be no DMA activity. Now we can shut down the upstream
+ * link (except maybe for PME# resume signaling) and enter some PCI
+ * low power state, if the hardware allows.
*/
- case HC_STATE_RUNNING:
- hcd->state = HC_STATE_QUIESCING;
- retval = hcd->driver->suspend (hcd, message);
- if (retval) {
- dev_dbg (hcd->self.controller,
- "suspend fail, retval %d\n",
- retval);
- break;
- }
- hcd->state = HC_STATE_SUSPENDED;
- /* FALLTHROUGH */
+ if (hcd->state == HC_STATE_SUSPENDED) {
- /* entry with CONFIG_USB_SUSPEND, or hcds that autosuspend: the
- * controller and/or root hub will already have been suspended,
- * but it won't be ready for a PCI resume call.
- *
- * FIXME only CONFIG_USB_SUSPEND guarantees hub_suspend() will
- * have been called, otherwise root hub timers still run ...
- */
- case HC_STATE_SUSPENDED:
/* no DMA or IRQs except when HC is active */
if (dev->current_state == PCI_D0) {
pci_save_state (dev);
@@ -248,7 +252,7 @@
if (!has_pci_pm) {
dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n");
- break;
+ goto done;
}
/* NOTE: dev->current_state becomes nonzero only here, and
@@ -259,28 +263,29 @@
retval = pci_set_power_state (dev, PCI_D3hot);
if (retval == 0) {
dev_dbg (hcd->self.controller, "--> PCI D3\n");
- retval = pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
- if (retval)
- break;
- retval = pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
- } else if (retval < 0) {
+
+ /* Ignore these return values. We rely on pci code to
+ * reject requests the hardware can't implement, rather
+ * than coding the same thing.
+ */
+ (void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
+ (void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
+ } else {
dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n",
retval);
(void) usb_hcd_pci_resume (dev);
- break;
}
- break;
- default:
+
+ } else {
dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n",
hcd->state);
WARN_ON(1);
retval = -EINVAL;
- break;
}
- /* update power_state **ONLY** to make sysfs happier */
+done:
if (retval == 0)
- dev->dev.power.power_state = message;
+ dev->dev.power.power_state = PMSG_SUSPEND;
return retval;
}
EXPORT_SYMBOL (usb_hcd_pci_suspend);
@@ -336,20 +341,9 @@
dev->current_state);
}
#endif
- retval = pci_enable_wake (dev, dev->current_state, 0);
- if (retval) {
- dev_err(hcd->self.controller,
- "can't enable_wake to %d, %d!\n",
- dev->current_state, retval);
- return retval;
- }
- retval = pci_enable_wake (dev, PCI_D3cold, 0);
- if (retval) {
- dev_err(hcd->self.controller,
- "can't enable_wake to %d, %d!\n",
- PCI_D3cold, retval);
- return retval;
- }
+ /* yes, ignore these results too... */
+ (void) pci_enable_wake (dev, dev->current_state, 0);
+ (void) pci_enable_wake (dev, PCI_D3cold, 0);
} else {
/* Same basic cases: clean (powered/not), dirty */
dev_dbg(hcd->self.controller, "PCI legacy resume\n");
@@ -371,17 +365,17 @@
dev->dev.power.power_state = PMSG_ON;
- hcd->state = HC_STATE_RESUMING;
hcd->saw_irq = 0;
- retval = hcd->driver->resume (hcd);
- if (!HC_IS_RUNNING (hcd->state)) {
- dev_dbg (hcd->self.controller,
- "resume fail, retval %d\n", retval);
- usb_hc_died (hcd);
+ if (hcd->driver->resume) {
+ retval = hcd->driver->resume(hcd);
+ if (retval) {
+ dev_err (hcd->self.controller,
+ "PCI post-resume error %d!\n", retval);
+ usb_hc_died (hcd);
+ }
}
- retval = pci_enable_device(dev);
return retval;
}
EXPORT_SYMBOL (usb_hcd_pci_resume);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 1017a97..6c7ca5b 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -130,7 +130,7 @@
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
0x00, 0x00, /* __le16 idVendor; */
0x00, 0x00, /* __le16 idProduct; */
@@ -153,7 +153,7 @@
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
0x00, 0x00, /* __le16 idVendor; */
0x00, 0x00, /* __le16 idProduct; */
@@ -458,22 +458,18 @@
default:
/* non-generic request */
- if (HC_IS_SUSPENDED (hcd->state))
- status = -EAGAIN;
- else {
- switch (typeReq) {
- case GetHubStatus:
- case GetPortStatus:
- len = 4;
- break;
- case GetHubDescriptor:
- len = sizeof (struct usb_hub_descriptor);
- break;
- }
- status = hcd->driver->hub_control (hcd,
- typeReq, wValue, wIndex,
- tbuf, wLength);
+ switch (typeReq) {
+ case GetHubStatus:
+ case GetPortStatus:
+ len = 4;
+ break;
+ case GetHubDescriptor:
+ len = sizeof (struct usb_hub_descriptor);
+ break;
}
+ status = hcd->driver->hub_control (hcd,
+ typeReq, wValue, wIndex,
+ tbuf, wLength);
break;
error:
/* "protocol stall" on error */
@@ -487,7 +483,7 @@
"CTRL: TypeReq=0x%x val=0x%x "
"idx=0x%x len=%d ==> %d\n",
typeReq, wValue, wIndex,
- wLength, urb->status);
+ wLength, status);
}
}
if (len) {
@@ -748,10 +744,9 @@
{
struct usb_bus *bus;
- bus = kmalloc (sizeof *bus, GFP_KERNEL);
+ bus = kzalloc (sizeof *bus, GFP_KERNEL);
if (!bus)
return NULL;
- memset(bus, 0, sizeof(struct usb_bus));
usb_bus_init (bus);
bus->op = op;
return bus;
@@ -782,7 +777,8 @@
return -E2BIG;
}
- bus->class_dev = class_device_create(usb_host_class, MKDEV(0,0), bus->controller, "usb_host%d", busnum);
+ bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
+ bus->controller, "usb_host%d", busnum);
if (IS_ERR(bus->class_dev)) {
clear_bit(busnum, busmap.busmap);
up(&usb_bus_list_lock);
@@ -795,8 +791,7 @@
list_add (&bus->bus_list, &usb_bus_list);
up (&usb_bus_list_lock);
- usbfs_add_bus (bus);
- usbmon_notify_bus_add (bus);
+ usb_notify_add_bus(bus);
dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
return 0;
@@ -823,8 +818,7 @@
list_del (&bus->bus_list);
up (&usb_bus_list_lock);
- usbmon_notify_bus_remove (bus);
- usbfs_remove_bus (bus);
+ usb_notify_remove_bus(bus);
clear_bit (bus->busnum, busmap.busmap);
@@ -1112,7 +1106,7 @@
* expects usb_submit_urb() to have sanity checked and conditioned all
* inputs in the urb
*/
-static int hcd_submit_urb (struct urb *urb, unsigned mem_flags)
+static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
{
int status;
struct usb_hcd *hcd = urb->dev->bus->hcpriv;
@@ -1142,10 +1136,20 @@
else switch (hcd->state) {
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
+doit:
usb_get_dev (urb->dev);
list_add_tail (&urb->urb_list, &ep->urb_list);
status = 0;
break;
+ case HC_STATE_SUSPENDED:
+ /* HC upstream links (register access, wakeup signaling) can work
+ * even when the downstream links (and DMA etc) are quiesced; let
+ * usbcore talk to the root hub.
+ */
+ if (hcd->self.controller->power.power_state.event == PM_EVENT_ON
+ && urb->dev->parent == NULL)
+ goto doit;
+ /* FALL THROUGH */
default:
status = -ESHUTDOWN;
break;
@@ -1293,12 +1297,6 @@
goto done;
}
- /* running ~= hc unlink handshake works (irq, timer, etc)
- * halted ~= no unlink handshake is needed
- * suspended, resuming == should never happen
- */
- WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT);
-
/* insist the urb is still queued */
list_for_each(tmp, &ep->urb_list) {
if (tmp == &urb->urb_list)
@@ -1430,28 +1428,92 @@
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_USB_SUSPEND
+#ifdef CONFIG_PM
-static int hcd_hub_suspend (struct usb_bus *bus)
+int hcd_bus_suspend (struct usb_bus *bus)
{
struct usb_hcd *hcd;
+ int status;
hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_suspend)
- return hcd->driver->hub_suspend (hcd);
- return 0;
+ if (!hcd->driver->bus_suspend)
+ return -ENOENT;
+ hcd->state = HC_STATE_QUIESCING;
+ status = hcd->driver->bus_suspend (hcd);
+ if (status == 0)
+ hcd->state = HC_STATE_SUSPENDED;
+ else
+ dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ "suspend", status);
+ return status;
}
-static int hcd_hub_resume (struct usb_bus *bus)
+int hcd_bus_resume (struct usb_bus *bus)
{
struct usb_hcd *hcd;
+ int status;
hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_resume)
- return hcd->driver->hub_resume (hcd);
- return 0;
+ if (!hcd->driver->bus_resume)
+ return -ENOENT;
+ if (hcd->state == HC_STATE_RUNNING)
+ return 0;
+ hcd->state = HC_STATE_RESUMING;
+ status = hcd->driver->bus_resume (hcd);
+ if (status == 0)
+ hcd->state = HC_STATE_RUNNING;
+ else {
+ dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ "resume", status);
+ usb_hc_died(hcd);
+ }
+ return status;
}
+/*
+ * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports
+ * @hcd: host controller for this root hub
+ *
+ * This call arranges that usb_hcd_resume_root_hub() is safe to call later;
+ * that the HCD's root hub polling is deactivated; and that the root's hub
+ * driver is suspended. HCDs may call this to autosuspend when their root
+ * hub's downstream ports are all inactive: unpowered, disconnected,
+ * disabled, or suspended.
+ *
+ * The HCD will autoresume on device connect change detection (using SRP
+ * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling
+ * from any ports that are suspended (if that is enabled). In most cases,
+ * overcurrent signaling (on powered ports) will also start autoresume.
+ *
+ * Always called with IRQs blocked.
+ */
+void usb_hcd_suspend_root_hub (struct usb_hcd *hcd)
+{
+ struct urb *urb;
+
+ spin_lock (&hcd_root_hub_lock);
+ usb_suspend_root_hub (hcd->self.root_hub);
+
+ /* force status urb to complete/unlink while suspended */
+ if (hcd->status_urb) {
+ urb = hcd->status_urb;
+ urb->status = -ECONNRESET;
+ urb->hcpriv = NULL;
+ urb->actual_length = 0;
+
+ del_timer (&hcd->rh_timer);
+ hcd->poll_pending = 0;
+ hcd->status_urb = NULL;
+ } else
+ urb = NULL;
+ spin_unlock (&hcd_root_hub_lock);
+ hcd->state = HC_STATE_SUSPENDED;
+
+ if (urb)
+ usb_hcd_giveback_urb (hcd, urb, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub);
+
/**
* usb_hcd_resume_root_hub - called by HCD to resume its root hub
* @hcd: host controller for this root hub
@@ -1459,7 +1521,7 @@
* The USB host controller calls this function when its root hub is
* suspended (with the remote wakeup feature enabled) and a remote
* wakeup request is received. It queues a request for khubd to
- * resume the root hub.
+ * resume the root hub (that is, manage its downstream ports again).
*/
void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
{
@@ -1470,14 +1532,10 @@
usb_resume_root_hub (hcd->self.root_hub);
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
-
-#else
-void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
-{
-}
-#endif
EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
+#endif
+
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_USB_OTG
@@ -1529,10 +1587,6 @@
.buffer_alloc = hcd_buffer_alloc,
.buffer_free = hcd_buffer_free,
.disable = hcd_endpoint_disable,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = hcd_hub_suspend,
- .hub_resume = hcd_hub_resume,
-#endif
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index ac451fa..24a62a2 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -142,22 +142,18 @@
struct usb_operations {
int (*get_frame_number) (struct usb_device *usb_dev);
- int (*submit_urb) (struct urb *urb, unsigned mem_flags);
+ int (*submit_urb) (struct urb *urb, gfp_t mem_flags);
int (*unlink_urb) (struct urb *urb, int status);
/* allocate dma-consistent buffer for URB_DMA_NOMAPPING */
void *(*buffer_alloc)(struct usb_bus *bus, size_t size,
- unsigned mem_flags,
+ gfp_t mem_flags,
dma_addr_t *dma);
void (*buffer_free)(struct usb_bus *bus, size_t size,
void *addr, dma_addr_t dma);
void (*disable)(struct usb_device *udev,
struct usb_host_endpoint *ep);
-
- /* global suspend/resume of bus */
- int (*hub_suspend)(struct usb_bus *);
- int (*hub_resume)(struct usb_bus *);
};
/* each driver provides one of these, and hardware init support */
@@ -182,12 +178,12 @@
int (*start) (struct usb_hcd *hcd);
/* NOTE: these suspend/resume calls relate to the HC as
- * a whole, not just the root hub; they're for bus glue.
+ * a whole, not just the root hub; they're for PCI bus glue.
*/
- /* called after all devices were suspended */
+ /* called after suspending the hub, before entering D3 etc */
int (*suspend) (struct usb_hcd *hcd, pm_message_t message);
- /* called before any devices get resumed */
+ /* called after entering D0 (etc), before resuming the hub */
int (*resume) (struct usb_hcd *hcd);
/* cleanly make HCD stop writing memory and doing I/O */
@@ -200,7 +196,7 @@
int (*urb_enqueue) (struct usb_hcd *hcd,
struct usb_host_endpoint *ep,
struct urb *urb,
- unsigned mem_flags);
+ gfp_t mem_flags);
int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);
/* hw synch, freeing endpoint resources that urb_dequeue can't */
@@ -212,8 +208,8 @@
int (*hub_control) (struct usb_hcd *hcd,
u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
- int (*hub_suspend)(struct usb_hcd *);
- int (*hub_resume)(struct usb_hcd *);
+ int (*bus_suspend)(struct usb_hcd *);
+ int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
void (*hub_irq_enable)(struct usb_hcd *);
/* Needed only if port-change IRQs are level-triggered */
@@ -247,7 +243,7 @@
void hcd_buffer_destroy (struct usb_hcd *hcd);
void *hcd_buffer_alloc (struct usb_bus *bus, size_t size,
- unsigned mem_flags, dma_addr_t *dma);
+ gfp_t mem_flags, dma_addr_t *dma);
void hcd_buffer_free (struct usb_bus *bus, size_t size,
void *addr, dma_addr_t dma);
@@ -355,8 +351,6 @@
extern struct usb_bus *usb_alloc_bus (struct usb_operations *);
-extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
-
extern void usb_set_device_state(struct usb_device *udev,
enum usb_device_state new_state);
@@ -378,6 +372,33 @@
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
+#ifdef CONFIG_PM
+extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd);
+extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
+extern int hcd_bus_suspend (struct usb_bus *bus);
+extern int hcd_bus_resume (struct usb_bus *bus);
+#else
+static inline void usb_hcd_suspend_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+
+static inline int hcd_bus_suspend(struct usb_bus *bus)
+{
+ return 0;
+}
+
+static inline int hcd_bus_resume (struct usb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_PM */
+
/*
* USB device fs stuff
*/
@@ -388,23 +409,13 @@
* these are expected to be called from the USB core/hub thread
* with the kernel lock held
*/
-extern void usbfs_add_bus(struct usb_bus *bus);
-extern void usbfs_remove_bus(struct usb_bus *bus);
-extern void usbfs_add_device(struct usb_device *dev);
-extern void usbfs_remove_device(struct usb_device *dev);
extern void usbfs_update_special (void);
-
extern int usbfs_init(void);
extern void usbfs_cleanup(void);
#else /* CONFIG_USB_DEVICEFS */
-static inline void usbfs_add_bus(struct usb_bus *bus) {}
-static inline void usbfs_remove_bus(struct usb_bus *bus) {}
-static inline void usbfs_add_device(struct usb_device *dev) {}
-static inline void usbfs_remove_device(struct usb_device *dev) {}
static inline void usbfs_update_special (void) {}
-
static inline int usbfs_init(void) { return 0; }
static inline void usbfs_cleanup(void) { }
@@ -419,8 +430,6 @@
void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
void (*urb_complete)(struct usb_bus *bus, struct urb *urb);
/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
- void (*bus_add)(struct usb_bus *bus);
- void (*bus_remove)(struct usb_bus *bus);
};
extern struct usb_mon_operations *mon_ops;
@@ -443,18 +452,6 @@
if (bus->monitored)
(*mon_ops->urb_complete)(bus, urb);
}
-
-static inline void usbmon_notify_bus_add(struct usb_bus *bus)
-{
- if (mon_ops)
- (*mon_ops->bus_add)(bus);
-}
-
-static inline void usbmon_notify_bus_remove(struct usb_bus *bus)
-{
- if (mon_ops)
- (*mon_ops->bus_remove)(bus);
-}
int usb_mon_register(struct usb_mon_operations *ops);
void usb_mon_deregister(void);
@@ -465,8 +462,6 @@
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
int error) {}
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
-static inline void usbmon_notify_bus_add(struct usb_bus *bus) {}
-static inline void usbmon_notify_bus_remove(struct usb_bus *bus) {}
#endif /* CONFIG_USB_MON */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a12cab5..256d9f6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -436,9 +436,10 @@
{
int port1;
unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
+ u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
/* if hub supports power switching, enable power on each port */
- if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
dev_dbg(hub->intfdev, "enabling power on all ports\n");
for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
set_port_feature(hub->hdev, port1,
@@ -449,10 +450,18 @@
msleep(max(pgood_delay, (unsigned) 100));
}
+static inline void __hub_quiesce(struct usb_hub *hub)
+{
+ /* (nonblocking) khubd and related activity won't re-trigger */
+ hub->quiescing = 1;
+ hub->activating = 0;
+ hub->resume_root_hub = 0;
+}
+
static void hub_quiesce(struct usb_hub *hub)
{
- /* stop khubd and related activity */
- hub->quiescing = 1;
+ /* (blocking) stop khubd and related activity */
+ __hub_quiesce(hub);
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work(&hub->leds);
@@ -466,6 +475,7 @@
hub->quiescing = 0;
hub->activating = 1;
+ hub->resume_root_hub = 0;
status = usb_submit_urb(hub->urb, GFP_NOIO);
if (status < 0)
dev_err(hub->intfdev, "activate --> %d\n", status);
@@ -516,6 +526,7 @@
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
u16 hubstatus, hubchange;
+ u16 wHubCharacteristics;
unsigned int pipe;
int maxp, ret;
char *message;
@@ -561,9 +572,9 @@
dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
(hdev->maxchild == 1) ? "" : "s");
- le16_to_cpus(&hub->descriptor->wHubCharacteristics);
+ wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
- if (hub->descriptor->wHubCharacteristics & HUB_CHAR_COMPOUND) {
+ if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
int i;
char portstr [USB_MAXCHILDREN + 1];
@@ -576,7 +587,7 @@
} else
dev_dbg(hub_dev, "standalone hub\n");
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) {
+ switch (wHubCharacteristics & HUB_CHAR_LPSM) {
case 0x00:
dev_dbg(hub_dev, "ganged power switching\n");
break;
@@ -589,7 +600,7 @@
break;
}
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) {
+ switch (wHubCharacteristics & HUB_CHAR_OCPM) {
case 0x00:
dev_dbg(hub_dev, "global over-current protection\n");
break;
@@ -629,7 +640,7 @@
}
/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) {
+ switch (wHubCharacteristics & HUB_CHAR_TTTT) {
case HUB_TTTT_8_BITS:
if (hdev->descriptor.bDeviceProtocol != 0) {
hub->tt.think_time = 666;
@@ -659,7 +670,7 @@
}
/* probe() zeroes hub->indicator[] */
- if (hub->descriptor->wHubCharacteristics & HUB_CHAR_PORTIND) {
+ if (wHubCharacteristics & HUB_CHAR_PORTIND) {
hub->has_indicators = 1;
dev_dbg(hub_dev, "Port indicators are supported\n");
}
@@ -704,7 +715,7 @@
(hubstatus & HUB_STATUS_LOCAL_POWER)
? "lost (inactive)" : "good");
- if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) == 0)
+ if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
dev_dbg(hub_dev, "%sover-current condition exists\n",
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
@@ -854,14 +865,12 @@
/* We found a hub */
dev_info (&intf->dev, "USB hub found\n");
- hub = kmalloc(sizeof(*hub), GFP_KERNEL);
+ hub = kzalloc(sizeof(*hub), GFP_KERNEL);
if (!hub) {
dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
return -ENOMEM;
}
- memset(hub, 0, sizeof(*hub));
-
INIT_LIST_HEAD(&hub->event_list);
hub->intfdev = &intf->dev;
hub->hdev = hdev;
@@ -1020,9 +1029,15 @@
spin_lock_irqsave(&device_state_lock, flags);
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
- else if (new_state != USB_STATE_NOTATTACHED)
+ else if (new_state != USB_STATE_NOTATTACHED) {
udev->state = new_state;
- else
+ if (new_state == USB_STATE_CONFIGURED)
+ device_init_wakeup(&udev->dev,
+ (udev->actconfig->desc.bmAttributes
+ & USB_CONFIG_ATT_WAKEUP));
+ else if (new_state != USB_STATE_SUSPENDED)
+ device_init_wakeup(&udev->dev, 0);
+ } else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
@@ -1111,14 +1126,14 @@
*/
usb_disable_device(udev, 0);
+ usb_notify_remove_device(udev);
+
/* Free the device number, remove the /proc/bus/usb entry and
* the sysfs attributes, and delete the parent's children[]
* (or root_hub) pointer.
*/
dev_dbg (&udev->dev, "unregistering device\n");
release_address(udev);
- usbfs_remove_device(udev);
- usbdev_remove(udev);
usb_remove_sysfs_dev_files(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
@@ -1189,21 +1204,6 @@
{}
#endif
-static void get_string(struct usb_device *udev, char **string, int index)
-{
- char *buf;
-
- if (!index)
- return;
- buf = kmalloc(256, GFP_KERNEL);
- if (!buf)
- return;
- if (usb_string(udev, index, buf, 256) > 0)
- *string = buf;
- else
- kfree(buf);
-}
-
#ifdef CONFIG_USB_OTG
#include "otg_whitelist.h"
@@ -1242,9 +1242,10 @@
}
/* read the standard strings and cache them if present */
- get_string(udev, &udev->product, udev->descriptor.iProduct);
- get_string(udev, &udev->manufacturer, udev->descriptor.iManufacturer);
- get_string(udev, &udev->serial, udev->descriptor.iSerialNumber);
+ udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+ udev->manufacturer = usb_cache_string(udev,
+ udev->descriptor.iManufacturer);
+ udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
/* Tell the world! */
dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
@@ -1316,11 +1317,9 @@
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_suspend_device (struct usb_device *,
- int port1, pm_message_t state);
- err = __usb_suspend_device(udev,
- udev->bus->otg_port,
- PMSG_SUSPEND);
+ static int __usb_suspend_device(struct usb_device *,
+ int port1);
+ err = __usb_suspend_device(udev, udev->bus->otg_port);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
@@ -1356,10 +1355,8 @@
}
/* USB device state == configured ... usable */
+ usb_notify_add_device(udev);
- /* add a /proc/bus/usb entry */
- usbdev_add(udev);
- usbfs_add_device(udev);
return 0;
fail:
@@ -1510,7 +1507,7 @@
/* FIXME let caller ask to power down the port:
* - some devices won't enumerate without a VBUS power cycle
* - SRP saves power that way
- * - usb_suspend_device(dev, PMSG_SUSPEND)
+ * - ... new call, TBD ...
* That's easy if this hub can switch power per-port, and
* khubd reactivates the port later (timer, SRP, etc).
* Powerdown must be optional, because of reset/DFU.
@@ -1546,11 +1543,7 @@
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
- if (udev->actconfig
- // && FIXME (remote wakeup enabled on this bus)
- // ... currently assuming it's always appropriate
- && (udev->actconfig->desc.bmAttributes
- & USB_CONFIG_ATT_WAKEUP) != 0) {
+ if (device_may_wakeup(&udev->dev)) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
@@ -1596,11 +1589,14 @@
* Other than re-initializing the hub (plug/unplug, except for root hubs),
* Linux (2.6) currently has NO mechanisms to initiate that: no khubd
* timer, no SRP, no requests through sysfs.
+ *
+ * If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when
+ * the root hub for their bus goes into global suspend ... so we don't
+ * (falsely) update the device power state to say it suspended.
*/
-static int __usb_suspend_device (struct usb_device *udev, int port1,
- pm_message_t state)
+static int __usb_suspend_device (struct usb_device *udev, int port1)
{
- int status;
+ int status = 0;
/* caller owns the udev device lock */
if (port1 < 0)
@@ -1611,95 +1607,39 @@
return 0;
}
- /* suspend interface drivers; if this is a hub, it
- * suspends the child devices
- */
+ /* all interfaces must already be suspended */
if (udev->actconfig) {
int i;
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *intf;
- struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (state.event <= intf->dev.power.power_state.event)
- continue;
- if (!intf->dev.driver)
- continue;
- driver = to_usb_driver(intf->dev.driver);
-
- if (driver->suspend) {
- status = driver->suspend(intf, state);
- if (intf->dev.power.power_state.event != state.event
- || status)
- dev_err(&intf->dev,
- "suspend %d fail, code %d\n",
- state.event, status);
- }
-
- /* only drivers with suspend() can ever resume();
- * and after power loss, even they won't.
- * bus_rescan_devices() can rebind drivers later.
- *
- * FIXME the PM core self-deadlocks when unbinding
- * drivers during suspend/resume ... everything grabs
- * dpm_sem (not a spinlock, ugh). we want to unbind,
- * since we know every driver's probe/disconnect works
- * even for drivers that can't suspend.
- */
- if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
-#if 1
- dev_warn(&intf->dev, "resume is unsafe!\n");
-#else
- down_write(&usb_bus_type.rwsem);
- device_release_driver(&intf->dev);
- up_write(&usb_bus_type.rwsem);
-#endif
+ if (is_active(intf)) {
+ dev_dbg(&intf->dev, "nyet suspended\n");
+ return -EBUSY;
}
}
}
- /*
- * FIXME this needs port power off call paths too, to help force
- * USB into the "generic" PM model. At least for devices on
- * ports that aren't using ganged switching (usually root hubs).
- *
- * NOTE: SRP-capable links should adopt more aggressive poweroff
- * policies (when HNP doesn't apply) once we have mechanisms to
- * turn power back on! (Likely not before 2.7...)
+ /* we only change a device's upstream USB link.
+ * root hubs have no upstream USB link.
*/
- if (state.event > PM_EVENT_FREEZE) {
- dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
- }
-
- /* "global suspend" of the HC-to-USB interface (root hub), or
- * "selective suspend" of just one hub-device link.
- */
- if (!udev->parent) {
- struct usb_bus *bus = udev->bus;
- if (bus && bus->op->hub_suspend) {
- status = bus->op->hub_suspend (bus);
- if (status == 0) {
- dev_dbg(&udev->dev, "usb suspend\n");
- usb_set_device_state(udev,
- USB_STATE_SUSPENDED);
- }
- } else
- status = -EOPNOTSUPP;
- } else
+ if (udev->parent)
status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
udev);
if (status == 0)
- udev->dev.power.power_state = state;
+ udev->dev.power.power_state = PMSG_SUSPEND;
return status;
}
-/**
+#endif
+
+/*
* usb_suspend_device - suspend a usb device
* @udev: device that's no longer in active use
- * @state: PMSG_SUSPEND to suspend
- * Context: must be able to sleep; device not locked
+ * Context: must be able to sleep; device not locked; pm locks held
*
* Suspends a USB device that isn't in active use, conserving power.
* Devices may wake out of a suspend, if anything important happens,
@@ -1707,37 +1647,50 @@
* suspend by the host, using usb_resume_device(). It's also routine
* to disconnect devices while they are suspended.
*
+ * This only affects the USB hardware for a device; its interfaces
+ * (and, for hubs, child devices) must already have been suspended.
+ *
* Suspending OTG devices may trigger HNP, if that's been enabled
* between a pair of dual-role devices. That will change roles, such
* as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
*
* Returns 0 on success, else negative errno.
*/
-int usb_suspend_device(struct usb_device *udev, pm_message_t state)
+int usb_suspend_device(struct usb_device *udev)
{
+#ifdef CONFIG_USB_SUSPEND
int port1, status;
port1 = locktree(udev);
if (port1 < 0)
return port1;
- status = __usb_suspend_device(udev, port1, state);
+ status = __usb_suspend_device(udev, port1);
usb_unlock_device(udev);
return status;
+#else
+ /* NOTE: udev->state unchanged, it's not lying ... */
+ udev->dev.power.power_state = PMSG_SUSPEND;
+ return 0;
+#endif
}
+EXPORT_SYMBOL_GPL(usb_suspend_device);
/*
+ * If the USB "suspend" state is in use (rather than "global suspend"),
+ * many devices will be individually taken out of suspend state using
+ * special" resume" signaling. These routines kick in shortly after
* hardware resume signaling is finished, either because of selective
* resume (by host) or remote wakeup (by device) ... now see what changed
* in the tree that's rooted at this device.
*/
-static int finish_port_resume(struct usb_device *udev)
+static int finish_device_resume(struct usb_device *udev)
{
int status;
u16 devstatus;
/* caller owns the udev device lock */
- dev_dbg(&udev->dev, "usb resume\n");
+ dev_dbg(&udev->dev, "finish resume\n");
/* usb ch9 identifies four variants of SUSPENDED, based on what
* state the device resumes to. Linux currently won't see the
@@ -1747,7 +1700,6 @@
usb_set_device_state(udev, udev->actconfig
? USB_STATE_CONFIGURED
: USB_STATE_ADDRESS);
- udev->dev.power.power_state = PMSG_ON;
/* 10.5.4.5 says be sure devices in the tree are still there.
* For now let's assume the device didn't go crazy on resume,
@@ -1760,9 +1712,11 @@
status);
else if (udev->actconfig) {
unsigned i;
+ int (*resume)(struct device *);
le16_to_cpus(&devstatus);
- if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)
+ && udev->parent) {
status = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE,
@@ -1778,33 +1732,11 @@
}
/* resume interface drivers; if this is a hub, it
- * resumes the child devices
+ * may have a child resume event to deal with soon
*/
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *intf;
- struct usb_driver *driver;
-
- intf = udev->actconfig->interface[i];
- if (intf->dev.power.power_state.event == PM_EVENT_ON)
- continue;
- if (!intf->dev.driver) {
- /* FIXME maybe force to alt 0 */
- continue;
- }
- driver = to_usb_driver(intf->dev.driver);
-
- /* bus_rescan_devices() may rebind drivers */
- if (!driver->resume)
- continue;
-
- /* can we do better than just logging errors? */
- status = driver->resume(intf);
- if (intf->dev.power.power_state.event != PM_EVENT_ON
- || status)
- dev_dbg(&intf->dev,
- "resume fail, state %d code %d\n",
- intf->dev.power.power_state.event, status);
- }
+ resume = udev->dev.bus->resume;
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++)
+ (void) resume(&udev->actconfig->interface[i]->dev);
status = 0;
} else if (udev->devnum <= 0) {
@@ -1814,6 +1746,8 @@
return status;
}
+#ifdef CONFIG_USB_SUSPEND
+
static int
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
@@ -1859,7 +1793,7 @@
/* TRSMRCY = 10 msec */
msleep(10);
if (udev)
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
}
}
if (status < 0)
@@ -1868,12 +1802,12 @@
return status;
}
-static int hub_resume (struct usb_interface *intf);
+#endif
-/**
+/*
* usb_resume_device - re-activate a suspended usb device
* @udev: device to re-activate
- * Context: must be able to sleep; device not locked
+ * Context: must be able to sleep; device not locked; pm locks held
*
* This will re-activate the suspended device, increasing power usage
* while letting drivers communicate again with its endpoints.
@@ -1891,35 +1825,22 @@
if (port1 < 0)
return port1;
- /* "global resume" of the HC-to-USB interface (root hub), or
- * selective resume of one hub-to-device port
- */
- if (!udev->parent) {
- struct usb_bus *bus = udev->bus;
- if (bus && bus->op->hub_resume) {
- status = bus->op->hub_resume (bus);
+#ifdef CONFIG_USB_SUSPEND
+ /* selective resume of one downstream hub-to-device port */
+ if (udev->parent) {
+ if (udev->state == USB_STATE_SUSPENDED) {
+ // NOTE swsusp may bork us, device state being wrong...
+ // NOTE this fails if parent is also suspended...
+ status = hub_port_resume(hdev_to_hub(udev->parent),
+ port1, udev);
} else
- status = -EOPNOTSUPP;
- if (status == 0) {
- dev_dbg(&udev->dev, "usb resume\n");
- /* TRSMRCY = 10 msec */
- msleep(10);
- usb_set_device_state (udev, USB_STATE_CONFIGURED);
- udev->dev.power.power_state = PMSG_ON;
- status = hub_resume (udev
- ->actconfig->interface[0]);
- }
- } else if (udev->state == USB_STATE_SUSPENDED) {
- // NOTE this fails if parent is also suspended...
- status = hub_port_resume(hdev_to_hub(udev->parent),
- port1, udev);
- } else {
- status = 0;
- }
- if (status < 0) {
+ status = 0;
+ } else
+#endif
+ status = finish_device_resume(udev);
+ if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n",
status);
- }
usb_unlock_device(udev);
@@ -1936,6 +1857,8 @@
{
int status = 0;
+#ifdef CONFIG_USB_SUSPEND
+
/* don't repeat RESUME sequence if this device
* was already woken up by some other task
*/
@@ -1944,38 +1867,52 @@
dev_dbg(&udev->dev, "RESUME (wakeup)\n");
/* TRSMRCY = 10 msec */
msleep(10);
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
}
up(&udev->serialize);
+#endif
return status;
}
-static int hub_suspend(struct usb_interface *intf, pm_message_t state)
+static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
- int status;
- /* stop khubd and related activity */
- hub_quiesce(hub);
-
- /* then suspend every port */
+ /* fail if children aren't already suspended */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
udev = hdev->children [port1-1];
- if (!udev)
- continue;
- down(&udev->serialize);
- status = __usb_suspend_device(udev, port1, state);
- up(&udev->serialize);
- if (status < 0)
- dev_dbg(&intf->dev, "suspend port %d --> %d\n",
- port1, status);
+ if (udev && (udev->dev.power.power_state.event
+ == PM_EVENT_ON
+#ifdef CONFIG_USB_SUSPEND
+ || udev->state != USB_STATE_SUSPENDED
+#endif
+ )) {
+ dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
+ return -EBUSY;
+ }
}
- intf->dev.power.power_state = state;
+ /* "global suspend" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ struct usb_bus *bus = hdev->bus;
+ if (bus) {
+ int status = hcd_bus_suspend (bus);
+
+ if (status != 0) {
+ dev_dbg(&hdev->dev, "'global' suspend %d\n",
+ status);
+ return status;
+ }
+ } else
+ return -EOPNOTSUPP;
+ }
+
+ /* stop khubd and related activity */
+ hub_quiesce(hub);
return 0;
}
@@ -1983,11 +1920,35 @@
{
struct usb_device *hdev = interface_to_usbdev(intf);
struct usb_hub *hub = usb_get_intfdata (intf);
- unsigned port1;
int status;
- if (intf->dev.power.power_state.event == PM_EVENT_ON)
- return 0;
+ /* "global resume" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ struct usb_bus *bus = hdev->bus;
+ if (bus) {
+ status = hcd_bus_resume (bus);
+ if (status) {
+ dev_dbg(&intf->dev, "'global' resume %d\n",
+ status);
+ return status;
+ }
+ } else
+ return -EOPNOTSUPP;
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ }
+ }
+
+ hub_activate(hub);
+
+ /* REVISIT: this recursion probably shouldn't exist. Remove
+ * this code sometime, after retesting with different root and
+ * external hubs.
+ */
+#ifdef CONFIG_USB_SUSPEND
+ {
+ unsigned port1;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
@@ -2013,7 +1974,7 @@
if (portstat & USB_PORT_STAT_SUSPEND)
status = hub_port_resume(hub, port1, udev);
else {
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
if (status < 0) {
dev_dbg(&intf->dev, "resume port %d --> %d\n",
port1, status);
@@ -2022,13 +1983,23 @@
}
up(&udev->serialize);
}
- intf->dev.power.power_state = PMSG_ON;
-
- hub->resume_root_hub = 0;
- hub_activate(hub);
+ }
+#endif
return 0;
}
+void usb_suspend_root_hub(struct usb_device *hdev)
+{
+ struct usb_hub *hub = hdev_to_hub(hdev);
+
+ /* This also makes any led blinker stop retriggering. We're called
+ * from irq, so the blinker might still be scheduled. Caller promises
+ * that the root hub status URB will be canceled.
+ */
+ __hub_quiesce(hub);
+ mark_quiesced(to_usb_interface(hub->intfdev));
+}
+
void usb_resume_root_hub(struct usb_device *hdev)
{
struct usb_hub *hub = hdev_to_hub(hdev);
@@ -2037,28 +2008,6 @@
kick_khubd(hub);
}
-#else /* !CONFIG_USB_SUSPEND */
-
-int usb_suspend_device(struct usb_device *udev, pm_message_t state)
-{
- return 0;
-}
-
-int usb_resume_device(struct usb_device *udev)
-{
- return 0;
-}
-
-#define hub_suspend NULL
-#define hub_resume NULL
-#define remote_wakeup(x) 0
-
-#endif /* CONFIG_USB_SUSPEND */
-
-EXPORT_SYMBOL(usb_suspend_device);
-EXPORT_SYMBOL(usb_resume_device);
-
-
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
@@ -2467,6 +2416,7 @@
{
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
+ u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
int status, i;
dev_dbg (hub_dev,
@@ -2504,8 +2454,7 @@
if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
/* maybe switch power back on (e.g. root hub was reset) */
- if ((hub->descriptor->wHubCharacteristics
- & HUB_CHAR_LPSM) < 2
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
@@ -2684,21 +2633,28 @@
intf = to_usb_interface(hub->intfdev);
hub_dev = &intf->dev;
- dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
+ i = hub->resume_root_hub;
+
+ dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
hdev->state, hub->descriptor
? hub->descriptor->bNbrPorts
: 0,
/* NOTE: expects max 15 ports... */
(u16) hub->change_bits[0],
- (u16) hub->event_bits[0]);
+ (u16) hub->event_bits[0],
+ i ? ", resume root" : "");
usb_get_intf(intf);
- i = hub->resume_root_hub;
spin_unlock_irq(&hub_event_lock);
- /* Is this is a root hub wanting to be resumed? */
- if (i)
- usb_resume_device(hdev);
+ /* Is this is a root hub wanting to reactivate the downstream
+ * ports? If so, be sure the interface resumes even if its
+ * stub "device" node was never suspended.
+ */
+ if (i) {
+ dpm_runtime_resume(&hdev->dev);
+ dpm_runtime_resume(&intf->dev);
+ }
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index e7fa9b5..bf23f89 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -131,7 +131,7 @@
__u8 bDescLength;
__u8 bDescriptorType;
__u8 bNbrPorts;
- __u16 wHubCharacteristics;
+ __le16 wHubCharacteristics;
__u8 bPwrOn2PwrGood;
__u8 bHubContrCurrent;
/* add 1 bit for hub status change; round to bytes */
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index d07bba0..12f490f 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,6 +39,7 @@
#include <linux/usbdevice_fs.h>
#include <linux/smp_lock.h>
#include <linux/parser.h>
+#include <linux/notifier.h>
#include <asm/byteorder.h>
#include "usb.h"
#include "hcd.h"
@@ -619,7 +620,7 @@
}
}
-void usbfs_add_bus(struct usb_bus *bus)
+static void usbfs_add_bus(struct usb_bus *bus)
{
struct dentry *parent;
char name[8];
@@ -642,12 +643,9 @@
err ("error creating usbfs bus entry");
return;
}
-
- usbfs_update_special();
- usbfs_conn_disc_event();
}
-void usbfs_remove_bus(struct usb_bus *bus)
+static void usbfs_remove_bus(struct usb_bus *bus)
{
if (bus->usbfs_dentry) {
fs_remove_file (bus->usbfs_dentry);
@@ -659,12 +657,9 @@
remove_special_files();
num_buses = 0;
}
-
- usbfs_update_special();
- usbfs_conn_disc_event();
}
-void usbfs_add_device(struct usb_device *dev)
+static void usbfs_add_device(struct usb_device *dev)
{
char name[8];
int i;
@@ -690,12 +685,9 @@
}
if (dev->usbfs_dentry->d_inode)
dev->usbfs_dentry->d_inode->i_size = i_size;
-
- usbfs_update_special();
- usbfs_conn_disc_event();
}
-void usbfs_remove_device(struct usb_device *dev)
+static void usbfs_remove_device(struct usb_device *dev)
{
struct dev_state *ds;
struct siginfo sinfo;
@@ -716,10 +708,33 @@
kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid);
}
}
+}
+
+static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
+{
+ switch (action) {
+ case USB_DEVICE_ADD:
+ usbfs_add_device(dev);
+ break;
+ case USB_DEVICE_REMOVE:
+ usbfs_remove_device(dev);
+ break;
+ case USB_BUS_ADD:
+ usbfs_add_bus(dev);
+ break;
+ case USB_BUS_REMOVE:
+ usbfs_remove_bus(dev);
+ }
+
usbfs_update_special();
usbfs_conn_disc_event();
+ return NOTIFY_OK;
}
+static struct notifier_block usbfs_nb = {
+ .notifier_call = usbfs_notify,
+};
+
/* --------------------------------------------------------------------- */
static struct proc_dir_entry *usbdir = NULL;
@@ -732,6 +747,8 @@
if (retval)
return retval;
+ usb_register_notify(&usbfs_nb);
+
/* create mount point for usbfs */
usbdir = proc_mkdir("usb", proc_bus);
@@ -740,6 +757,7 @@
void usbfs_cleanup(void)
{
+ usb_unregister_notify(&usbfs_nb);
unregister_filesystem(&usb_fs_type);
if (usbdir)
remove_proc_entry("usb", proc_bus);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index f1fb67f..644a3d4 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -187,21 +187,37 @@
* If a thread in your driver uses this call, make sure your disconnect()
* method can wait for it to complete. Since you don't have a handle on
* the URB used, you can't cancel the request.
+ *
+ * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT
+ * ioctl, users are forced to abuse this routine by using it to submit
+ * URBs for interrupt endpoints. We will take the liberty of creating
+ * an interrupt URB (with the default interval) if the target is an
+ * interrupt endpoint.
*/
int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
void *data, int len, int *actual_length, int timeout)
{
struct urb *urb;
+ struct usb_host_endpoint *ep;
- if (len < 0)
+ ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out)
+ [usb_pipeendpoint(pipe)];
+ if (!ep || len < 0)
return -EINVAL;
- urb=usb_alloc_urb(0, GFP_KERNEL);
+ urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
- usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
- usb_api_blocking_completion, NULL);
+ if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT) {
+ pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+ usb_fill_int_urb(urb, usb_dev, pipe, data, len,
+ usb_api_blocking_completion, NULL,
+ ep->desc.bInterval);
+ } else
+ usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
+ usb_api_blocking_completion, NULL);
return usb_start_wait_urb(urb, timeout, actual_length);
}
@@ -321,7 +337,7 @@
struct scatterlist *sg,
int nents,
size_t length,
- unsigned mem_flags
+ gfp_t mem_flags
)
{
int i;
@@ -771,6 +787,31 @@
return err;
}
+/**
+ * usb_cache_string - read a string descriptor and cache it for later use
+ * @udev: the device whose string descriptor is being read
+ * @index: the descriptor index
+ *
+ * Returns a pointer to a kmalloc'ed buffer containing the descriptor string,
+ * or NULL if the index is 0 or the string could not be read.
+ */
+char *usb_cache_string(struct usb_device *udev, int index)
+{
+ char *buf;
+ char *smallbuf = NULL;
+ int len;
+
+ if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) {
+ if ((len = usb_string(udev, index, buf, 256)) > 0) {
+ if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL)
+ return buf;
+ memcpy(smallbuf, buf, len);
+ }
+ kfree(buf);
+ }
+ return smallbuf;
+}
+
/*
* usb_get_device_descriptor - (re)reads the device descriptor (usbcore)
* @dev: the device whose device descriptor is being updated
@@ -992,8 +1033,6 @@
dev_dbg (&dev->dev, "unregistering interface %s\n",
interface->dev.bus_id);
usb_remove_sysfs_intf_files(interface);
- kfree(interface->cur_altsetting->string);
- interface->cur_altsetting->string = NULL;
device_del (&interface->dev);
}
@@ -1133,6 +1172,8 @@
*/
/* prevent submissions using previous endpoint settings */
+ if (device_is_registered(&iface->dev))
+ usb_remove_sysfs_intf_files(iface);
usb_disable_interface(dev, iface);
iface->cur_altsetting = alt;
@@ -1168,6 +1209,8 @@
* (Likewise, EP0 never "halts" on well designed devices.)
*/
usb_enable_interface(dev, iface);
+ if (device_is_registered(&iface->dev))
+ usb_create_sysfs_intf_files(iface);
return 0;
}
@@ -1217,10 +1260,8 @@
USB_REQ_SET_CONFIGURATION, 0,
config->desc.bConfigurationValue, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (retval < 0) {
- usb_set_device_state(dev, USB_STATE_ADDRESS);
+ if (retval < 0)
return retval;
- }
dev->toggle[0] = dev->toggle[1] = 0;
@@ -1229,6 +1270,8 @@
struct usb_interface *intf = config->interface[i];
struct usb_host_interface *alt;
+ if (device_is_registered(&intf->dev))
+ usb_remove_sysfs_intf_files(intf);
alt = usb_altnum_to_altsetting(intf, 0);
/* No altsetting 0? We'll assume the first altsetting.
@@ -1241,6 +1284,8 @@
intf->cur_altsetting = alt;
usb_enable_interface(dev, intf);
+ if (device_is_registered(&intf->dev))
+ usb_create_sysfs_intf_files(intf);
}
return 0;
}
@@ -1328,7 +1373,7 @@
}
for (; n < nintf; ++n) {
- new_interfaces[n] = kmalloc(
+ new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
GFP_KERNEL);
if (!new_interfaces[n]) {
@@ -1369,7 +1414,6 @@
struct usb_host_interface *alt;
cp->interface[i] = intf = new_interfaces[i];
- memset(intf, 0, sizeof(*intf));
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
@@ -1393,6 +1437,7 @@
intf->dev.dma_mask = dev->dev.dma_mask;
intf->dev.release = release_interface;
device_initialize (&intf->dev);
+ mark_quiesced(intf);
sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
dev->bus->busnum, dev->devpath,
configuration,
@@ -1400,12 +1445,9 @@
}
kfree(new_interfaces);
- if ((cp->desc.iConfiguration) &&
- (cp->string == NULL)) {
- cp->string = kmalloc(256, GFP_KERNEL);
- if (cp->string)
- usb_string(dev, cp->desc.iConfiguration, cp->string, 256);
- }
+ if (cp->string == NULL)
+ cp->string = usb_cache_string(dev,
+ cp->desc.iConfiguration);
/* Now that all the interfaces are set up, register them
* to trigger binding of drivers to interfaces. probe()
@@ -1415,13 +1457,12 @@
*/
for (i = 0; i < nintf; ++i) {
struct usb_interface *intf = cp->interface[i];
- struct usb_interface_descriptor *desc;
+ struct usb_host_interface *alt = intf->cur_altsetting;
- desc = &intf->altsetting [0].desc;
dev_dbg (&dev->dev,
"adding %s (config #%d, interface %d)\n",
intf->dev.bus_id, configuration,
- desc->bInterfaceNumber);
+ alt->desc.bInterfaceNumber);
ret = device_add (&intf->dev);
if (ret != 0) {
dev_err(&dev->dev,
@@ -1430,13 +1471,6 @@
ret);
continue;
}
- if ((intf->cur_altsetting->desc.iInterface) &&
- (intf->cur_altsetting->string == NULL)) {
- intf->cur_altsetting->string = kmalloc(256, GFP_KERNEL);
- if (intf->cur_altsetting->string)
- usb_string(dev, intf->cur_altsetting->desc.iInterface,
- intf->cur_altsetting->string, 256);
- }
usb_create_sysfs_intf_files (intf);
}
}
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
new file mode 100644
index 0000000..37da059
--- /dev/null
+++ b/drivers/usb/core/notify.c
@@ -0,0 +1,120 @@
+/*
+ * All the USB notify logic
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * notifier functions originally based on those in kernel/sys.c
+ * but fixed up to not be so broken.
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#ifdef CONFIG_USB_DEBUG
+ #define DEBUG
+#else
+ #undef DEBUG
+#endif
+#include <linux/usb.h>
+
+#include "usb.h"
+
+
+static struct notifier_block *usb_notifier_list;
+static DECLARE_MUTEX(usb_notifier_lock);
+
+static void usb_notifier_chain_register(struct notifier_block **list,
+ struct notifier_block *n)
+{
+ down(&usb_notifier_lock);
+ while (*list) {
+ if (n->priority > (*list)->priority)
+ break;
+ list = &((*list)->next);
+ }
+ n->next = *list;
+ *list = n;
+ up(&usb_notifier_lock);
+}
+
+static void usb_notifier_chain_unregister(struct notifier_block **nl,
+ struct notifier_block *n)
+{
+ down(&usb_notifier_lock);
+ while ((*nl)!=NULL) {
+ if ((*nl)==n) {
+ *nl = n->next;
+ goto exit;
+ }
+ nl=&((*nl)->next);
+ }
+exit:
+ up(&usb_notifier_lock);
+}
+
+static int usb_notifier_call_chain(struct notifier_block **n,
+ unsigned long val, void *v)
+{
+ int ret=NOTIFY_DONE;
+ struct notifier_block *nb = *n;
+
+ down(&usb_notifier_lock);
+ while (nb) {
+ ret = nb->notifier_call(nb,val,v);
+ if (ret&NOTIFY_STOP_MASK) {
+ goto exit;
+ }
+ nb = nb->next;
+ }
+exit:
+ up(&usb_notifier_lock);
+ return ret;
+}
+
+/**
+ * usb_register_notify - register a notifier callback whenever a usb change happens
+ * @nb: pointer to the notifier block for the callback events.
+ *
+ * These changes are either USB devices or busses being added or removed.
+ */
+void usb_register_notify(struct notifier_block *nb)
+{
+ usb_notifier_chain_register(&usb_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(usb_register_notify);
+
+/**
+ * usb_unregister_notify - unregister a notifier callback
+ * @nb: pointer to the notifier block for the callback events.
+ *
+ * usb_register_notifier() must have been previously called for this function
+ * to work properly.
+ */
+void usb_unregister_notify(struct notifier_block *nb)
+{
+ usb_notifier_chain_unregister(&usb_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(usb_unregister_notify);
+
+
+void usb_notify_add_device(struct usb_device *udev)
+{
+ usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_ADD, udev);
+}
+
+void usb_notify_remove_device(struct usb_device *udev)
+{
+ usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_REMOVE, udev);
+}
+
+void usb_notify_add_bus(struct usb_bus *ubus)
+{
+ usb_notifier_call_chain(&usb_notifier_list, USB_BUS_ADD, ubus);
+}
+
+void usb_notify_remove_bus(struct usb_bus *ubus)
+{
+ usb_notifier_call_chain(&usb_notifier_list, USB_BUS_REMOVE, ubus);
+}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 00297f1..edd83e0 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -22,9 +22,207 @@
#include "usb.h"
+/* endpoint stuff */
+struct ep_object {
+ struct usb_endpoint_descriptor *desc;
+ struct usb_device *udev;
+ struct kobject kobj;
+};
+#define to_ep_object(_kobj) \
+ container_of(_kobj, struct ep_object, kobj)
+
+struct ep_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct usb_device *,
+ struct usb_endpoint_descriptor *, char *);
+};
+#define to_ep_attribute(_attr) \
+ container_of(_attr, struct ep_attribute, attr)
+
+#define EP_ATTR(_name) \
+struct ep_attribute ep_##_name = { \
+ .attr = {.name = #_name, .owner = THIS_MODULE, \
+ .mode = S_IRUGO}, \
+ .show = show_ep_##_name}
+
+#define usb_ep_attr(field, format_string) \
+static ssize_t show_ep_##field(struct usb_device *udev, \
+ struct usb_endpoint_descriptor *desc, \
+ char *buf) \
+{ \
+ return sprintf(buf, format_string, desc->field); \
+} \
+static EP_ATTR(field);
+
+usb_ep_attr(bLength, "%02x\n")
+usb_ep_attr(bEndpointAddress, "%02x\n")
+usb_ep_attr(bmAttributes, "%02x\n")
+usb_ep_attr(bInterval, "%02x\n")
+
+static ssize_t show_ep_wMaxPacketSize(struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc, char *buf)
+{
+ return sprintf(buf, "%04x\n",
+ le16_to_cpu(desc->wMaxPacketSize) & 0x07ff);
+}
+static EP_ATTR(wMaxPacketSize);
+
+static ssize_t show_ep_type(struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc, char *buf)
+{
+ char *type = "unknown";
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ type = "Control";
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ type = "Isoc";
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ type = "Bulk";
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ type = "Interrupt";
+ break;
+ }
+ return sprintf(buf, "%s\n", type);
+}
+static EP_ATTR(type);
+
+static ssize_t show_ep_interval(struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc, char *buf)
+{
+ char unit;
+ unsigned interval = 0;
+ unsigned in;
+
+ in = (desc->bEndpointAddress & USB_DIR_IN);
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ if (udev->speed == USB_SPEED_HIGH) /* uframes per NAK */
+ interval = desc->bInterval;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ interval = 1 << (desc->bInterval - 1);
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */
+ interval = desc->bInterval;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (udev->speed == USB_SPEED_HIGH)
+ interval = 1 << (desc->bInterval - 1);
+ else
+ interval = desc->bInterval;
+ break;
+ }
+ interval *= (udev->speed == USB_SPEED_HIGH) ? 125 : 1000;
+ if (interval % 1000)
+ unit = 'u';
+ else {
+ unit = 'm';
+ interval /= 1000;
+ }
+
+ return sprintf(buf, "%d%cs\n", interval, unit);
+}
+static EP_ATTR(interval);
+
+static ssize_t show_ep_direction(struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc, char *buf)
+{
+ char *direction;
+
+ if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_CONTROL)
+ direction = "both";
+ else if (desc->bEndpointAddress & USB_DIR_IN)
+ direction = "in";
+ else
+ direction = "out";
+ return sprintf(buf, "%s\n", direction);
+}
+static EP_ATTR(direction);
+
+static struct attribute *ep_attrs[] = {
+ &ep_bLength.attr,
+ &ep_bEndpointAddress.attr,
+ &ep_bmAttributes.attr,
+ &ep_bInterval.attr,
+ &ep_wMaxPacketSize.attr,
+ &ep_type.attr,
+ &ep_interval.attr,
+ &ep_direction.attr,
+ NULL,
+};
+
+static void ep_object_release(struct kobject *kobj)
+{
+ kfree(to_ep_object(kobj));
+}
+
+static ssize_t ep_object_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct ep_object *ep_obj = to_ep_object(kobj);
+ struct ep_attribute *ep_attr = to_ep_attribute(attr);
+
+ return (ep_attr->show)(ep_obj->udev, ep_obj->desc, buf);
+}
+
+static struct sysfs_ops ep_object_sysfs_ops = {
+ .show = ep_object_show,
+};
+
+static struct kobj_type ep_object_ktype = {
+ .release = ep_object_release,
+ .sysfs_ops = &ep_object_sysfs_ops,
+ .default_attrs = ep_attrs,
+};
+
+static void usb_create_ep_files(struct kobject *parent,
+ struct usb_host_endpoint *endpoint,
+ struct usb_device *udev)
+{
+ struct ep_object *ep_obj;
+ struct kobject *kobj;
+
+ ep_obj = kzalloc(sizeof(struct ep_object), GFP_KERNEL);
+ if (!ep_obj)
+ return;
+
+ ep_obj->desc = &endpoint->desc;
+ ep_obj->udev = udev;
+
+ kobj = &ep_obj->kobj;
+ kobject_set_name(kobj, "ep_%02x", endpoint->desc.bEndpointAddress);
+ kobj->parent = parent;
+ kobj->ktype = &ep_object_ktype;
+
+ /* Don't use kobject_register, because it generates a hotplug event */
+ kobject_init(kobj);
+ if (kobject_add(kobj) == 0)
+ endpoint->kobj = kobj;
+ else
+ kobject_put(kobj);
+}
+
+static void usb_remove_ep_files(struct usb_host_endpoint *endpoint)
+{
+
+ if (endpoint->kobj) {
+ kobject_del(endpoint->kobj);
+ kobject_put(endpoint->kobj);
+ endpoint->kobj = NULL;
+ }
+}
+
/* Active configuration fields */
#define usb_actconfig_show(field, multiplier, format_string) \
-static ssize_t show_##field (struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_##field (struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
struct usb_device *udev; \
struct usb_host_config *actconfig; \
@@ -46,22 +244,17 @@
usb_actconfig_attr (bmAttributes, 1, "%2x\n")
usb_actconfig_attr (bMaxPower, 2, "%3dmA\n")
-static ssize_t show_configuration_string(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_configuration_string(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct usb_device *udev;
struct usb_host_config *actconfig;
- int len;
udev = to_usb_device (dev);
actconfig = udev->actconfig;
if ((!actconfig) || (!actconfig->string))
return 0;
- len = sprintf(buf, actconfig->string, PAGE_SIZE);
- if (len < 0)
- return 0;
- buf[len] = '\n';
- buf[len+1] = 0;
- return len+1;
+ return sprintf(buf, "%s\n", actconfig->string);
}
static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL);
@@ -69,7 +262,8 @@
usb_actconfig_show(bConfigurationValue, 1, "%u\n");
static ssize_t
-set_bConfigurationValue (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+set_bConfigurationValue (struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct usb_device *udev = udev = to_usb_device (dev);
int config, value;
@@ -87,18 +281,13 @@
/* String fields */
#define usb_string_attr(name) \
-static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_##name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
struct usb_device *udev; \
- int len; \
\
udev = to_usb_device (dev); \
- len = snprintf(buf, 256, "%s", udev->name); \
- if (len < 0) \
- return 0; \
- buf[len] = '\n'; \
- buf[len+1] = 0; \
- return len+1; \
+ return sprintf(buf, "%s\n", udev->name); \
} \
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
@@ -167,7 +356,8 @@
/* Descriptor fields */
#define usb_descriptor_attr_le16(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, char *buf) \
+show_##field (struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct usb_device *udev; \
\
@@ -183,7 +373,8 @@
#define usb_descriptor_attr(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, char *buf) \
+show_##field (struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct usb_device *udev; \
\
@@ -236,19 +427,21 @@
if (udev->serial)
device_create_file (dev, &dev_attr_serial);
device_create_file (dev, &dev_attr_configuration);
+ usb_create_ep_files(&dev->kobj, &udev->ep0, udev);
}
void usb_remove_sysfs_dev_files (struct usb_device *udev)
{
struct device *dev = &udev->dev;
+ usb_remove_ep_files(&udev->ep0);
sysfs_remove_group(&dev->kobj, &dev_attr_grp);
- if (udev->descriptor.iManufacturer)
+ if (udev->manufacturer)
device_remove_file(dev, &dev_attr_manufacturer);
- if (udev->descriptor.iProduct)
+ if (udev->product)
device_remove_file(dev, &dev_attr_product);
- if (udev->descriptor.iSerialNumber)
+ if (udev->serial)
device_remove_file(dev, &dev_attr_serial);
device_remove_file (dev, &dev_attr_configuration);
}
@@ -256,11 +449,13 @@
/* Interface fields */
#define usb_intf_attr(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, char *buf) \
+show_##field (struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct usb_interface *intf = to_usb_interface (dev); \
\
- return sprintf (buf, format_string, intf->cur_altsetting->desc.field); \
+ return sprintf (buf, format_string, \
+ intf->cur_altsetting->desc.field); \
} \
static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
@@ -271,7 +466,8 @@
usb_intf_attr (bInterfaceSubClass, "%02x\n")
usb_intf_attr (bInterfaceProtocol, "%02x\n")
-static ssize_t show_interface_string(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_interface_string(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct usb_interface *intf;
struct usb_device *udev;
@@ -288,34 +484,28 @@
}
static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL);
-static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_modalias(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct usb_interface *intf;
struct usb_device *udev;
- int len;
+ struct usb_host_interface *alt;
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
+ alt = intf->cur_altsetting;
- len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic",
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct),
- le16_to_cpu(udev->descriptor.bcdDevice),
- udev->descriptor.bDeviceClass,
- udev->descriptor.bDeviceSubClass,
- udev->descriptor.bDeviceProtocol);
- buf += len;
-
- if (udev->descriptor.bDeviceClass == 0) {
- struct usb_host_interface *alt = intf->cur_altsetting;
-
- return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol);
- } else {
- return len + sprintf(buf, "*isc*ip*\n");
- }
+ return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X"
+ "ic%02Xisc%02Xip%02X\n",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ le16_to_cpu(udev->descriptor.bcdDevice),
+ udev->descriptor.bDeviceClass,
+ udev->descriptor.bDeviceSubClass,
+ udev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol);
}
static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
@@ -333,20 +523,47 @@
.attrs = intf_attrs,
};
+static inline void usb_create_intf_ep_files(struct usb_interface *intf,
+ struct usb_device *udev)
+{
+ struct usb_host_interface *iface_desc;
+ int i;
+
+ iface_desc = intf->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i)
+ usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i],
+ udev);
+}
+
+static inline void usb_remove_intf_ep_files(struct usb_interface *intf)
+{
+ struct usb_host_interface *iface_desc;
+ int i;
+
+ iface_desc = intf->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i)
+ usb_remove_ep_files(&iface_desc->endpoint[i]);
+}
+
void usb_create_sysfs_intf_files (struct usb_interface *intf)
{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_interface *alt = intf->cur_altsetting;
+
sysfs_create_group(&intf->dev.kobj, &intf_attr_grp);
- if (intf->cur_altsetting->string)
+ if (alt->string == NULL)
+ alt->string = usb_cache_string(udev, alt->desc.iInterface);
+ if (alt->string)
device_create_file(&intf->dev, &dev_attr_interface);
-
+ usb_create_intf_ep_files(intf, udev);
}
void usb_remove_sysfs_intf_files (struct usb_interface *intf)
{
+ usb_remove_intf_ep_files(intf);
sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp);
if (intf->cur_altsetting->string)
device_remove_file(&intf->dev, &dev_attr_interface);
-
}
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c846fef..f2a1fed 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -60,7 +60,7 @@
*
* The driver must call usb_free_urb() when it is finished with the urb.
*/
-struct urb *usb_alloc_urb(int iso_packets, unsigned mem_flags)
+struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags)
{
struct urb *urb;
@@ -224,7 +224,7 @@
* GFP_NOIO, unless b) or c) apply
*
*/
-int usb_submit_urb(struct urb *urb, unsigned mem_flags)
+int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
{
int pipe, temp, max;
struct usb_device *dev;
@@ -237,7 +237,8 @@
(dev->state < USB_STATE_DEFAULT) ||
(!dev->bus) || (dev->devnum <= 0))
return -ENODEV;
- if (dev->state == USB_STATE_SUSPENDED)
+ if (dev->bus->controller->power.power_state.event != PM_EVENT_ON
+ || dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
if (!(op = dev->bus->op) || !op->submit_urb)
return -ENODEV;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 7d13150..0eefff7 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -107,10 +107,19 @@
id = usb_match_id (intf, driver->id_table);
if (id) {
dev_dbg (dev, "%s - got id\n", __FUNCTION__);
+
+ /* Interface "power state" doesn't correspond to any hardware
+ * state whatsoever. We use it to record when it's bound to
+ * a driver that may start I/0: it's not frozen/quiesced.
+ */
+ mark_active(intf);
intf->condition = USB_INTERFACE_BINDING;
error = driver->probe (intf, id);
- intf->condition = error ? USB_INTERFACE_UNBOUND :
- USB_INTERFACE_BOUND;
+ if (error) {
+ mark_quiesced(intf);
+ intf->condition = USB_INTERFACE_UNBOUND;
+ } else
+ intf->condition = USB_INTERFACE_BOUND;
}
return error;
@@ -136,6 +145,7 @@
0);
usb_set_intfdata(intf, NULL);
intf->condition = USB_INTERFACE_UNBOUND;
+ mark_quiesced(intf);
return 0;
}
@@ -299,6 +309,7 @@
dev->driver = &driver->driver;
usb_set_intfdata(iface, priv);
iface->condition = USB_INTERFACE_BOUND;
+ mark_active(iface);
/* if interface was already added, bind now; else let
* the future device_add() bind it, bypassing probe()
@@ -345,6 +356,7 @@
dev->driver = NULL;
usb_set_intfdata(iface, NULL);
iface->condition = USB_INTERFACE_UNBOUND;
+ mark_quiesced(iface);
}
/**
@@ -557,6 +569,7 @@
{
struct usb_interface *intf;
struct usb_device *usb_dev;
+ struct usb_host_interface *alt;
int i = 0;
int length = 0;
@@ -573,7 +586,8 @@
intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev (intf);
-
+ alt = intf->cur_altsetting;
+
if (usb_dev->devnum < 0) {
pr_debug ("usb %s: already deleted?\n", dev->bus_id);
return -ENODEV;
@@ -615,46 +629,27 @@
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (usb_dev->descriptor.bDeviceClass == 0) {
- struct usb_host_interface *alt = intf->cur_altsetting;
+ if (add_hotplug_env_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "INTERFACE=%d/%d/%d",
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
- /* 2.4 only exposed interface zero. in 2.5, hotplug
- * agents are called for all interfaces, and can use
- * $DEVPATH/bInterfaceNumber if necessary.
- */
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
-
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
- } else {
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol))
- return -ENOMEM;
- }
+ if (add_hotplug_env_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+ le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct),
+ le16_to_cpu(usb_dev->descriptor.bcdDevice),
+ usb_dev->descriptor.bDeviceClass,
+ usb_dev->descriptor.bDeviceSubClass,
+ usb_dev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
envp[i] = NULL;
@@ -709,12 +704,10 @@
{
struct usb_device *dev;
- dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
- memset(dev, 0, sizeof(*dev));
-
bus = usb_bus_get(bus);
if (!bus) {
kfree(dev);
@@ -1147,7 +1140,7 @@
void *usb_buffer_alloc (
struct usb_device *dev,
size_t size,
- unsigned mem_flags,
+ gfp_t mem_flags,
dma_addr_t *dma
)
{
@@ -1402,13 +1395,30 @@
usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
+static int verify_suspended(struct device *dev, void *unused)
+{
+ return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0;
+}
+
static int usb_generic_suspend(struct device *dev, pm_message_t message)
{
- struct usb_interface *intf;
- struct usb_driver *driver;
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+ int status;
- if (dev->driver == &usb_generic_driver)
- return usb_suspend_device (to_usb_device(dev), message);
+ /* USB devices enter SUSPEND state through their hubs, but can be
+ * marked for FREEZE as soon as their children are already idled.
+ * But those semantics are useless, so we equate the two (sigh).
+ */
+ if (dev->driver == &usb_generic_driver) {
+ if (dev->power.power_state.event == message.event)
+ return 0;
+ /* we need to rule out bogus requests through sysfs */
+ status = device_for_each_child(dev, NULL, verify_suspended);
+ if (status)
+ return status;
+ return usb_suspend_device (to_usb_device(dev));
+ }
if ((dev->driver == NULL) ||
(dev->driver_data == &usb_generic_driver_data))
@@ -1417,23 +1427,44 @@
intf = to_usb_interface(dev);
driver = to_usb_driver(dev->driver);
- /* there's only one USB suspend state */
- if (intf->dev.power.power_state.event)
+ /* with no hardware, USB interfaces only use FREEZE and ON states */
+ if (!is_active(intf))
return 0;
- if (driver->suspend)
- return driver->suspend(intf, message);
- return 0;
+ if (driver->suspend && driver->resume) {
+ status = driver->suspend(intf, message);
+ if (status)
+ dev_err(dev, "%s error %d\n", "suspend", status);
+ else
+ mark_quiesced(intf);
+ } else {
+ // FIXME else if there's no suspend method, disconnect...
+ dev_warn(dev, "no %s?\n", "suspend");
+ status = 0;
+ }
+ return status;
}
static int usb_generic_resume(struct device *dev)
{
- struct usb_interface *intf;
- struct usb_driver *driver;
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+ struct usb_device *udev;
+ int status;
- /* devices resume through their hub */
- if (dev->driver == &usb_generic_driver)
+ if (dev->power.power_state.event == PM_EVENT_ON)
+ return 0;
+
+ /* mark things as "on" immediately, no matter what errors crop up */
+ dev->power.power_state.event = PM_EVENT_ON;
+
+ /* devices resume through their hubs */
+ if (dev->driver == &usb_generic_driver) {
+ udev = to_usb_device(dev);
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return 0;
return usb_resume_device (to_usb_device(dev));
+ }
if ((dev->driver == NULL) ||
(dev->driver_data == &usb_generic_driver_data))
@@ -1442,8 +1473,22 @@
intf = to_usb_interface(dev);
driver = to_usb_driver(dev->driver);
- if (driver->resume)
- return driver->resume(intf);
+ udev = interface_to_usbdev(intf);
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return 0;
+
+ /* if driver was suspended, it has a resume method;
+ * however, sysfs can wrongly mark things as suspended
+ * (on the "no suspend method" FIXME path above)
+ */
+ if (driver->resume) {
+ status = driver->resume(intf);
+ if (status) {
+ dev_err(dev, "%s error %d\n", "resume", status);
+ mark_quiesced(intf);
+ }
+ } else
+ dev_warn(dev, "no %s?\n", "resume");
return 0;
}
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index e6504f3..1c4a684 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -13,12 +13,14 @@
extern int usb_get_device_descriptor(struct usb_device *dev,
unsigned int size);
+extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern void usb_lock_all_devices(void);
extern void usb_unlock_all_devices(void);
extern void usb_kick_khubd(struct usb_device *dev);
+extern void usb_suspend_root_hub(struct usb_device *hdev);
extern void usb_resume_root_hub(struct usb_device *dev);
extern int usb_hub_init(void);
@@ -28,6 +30,28 @@
extern int usb_host_init(void);
extern void usb_host_cleanup(void);
+extern int usb_suspend_device(struct usb_device *dev);
+extern int usb_resume_device(struct usb_device *dev);
+
+
+/* Interfaces and their "power state" are owned by usbcore */
+
+static inline void mark_active(struct usb_interface *f)
+{
+ f->dev.power.power_state.event = PM_EVENT_ON;
+}
+
+static inline void mark_quiesced(struct usb_interface *f)
+{
+ f->dev.power.power_state.event = PM_EVENT_FREEZE;
+}
+
+static inline int is_active(struct usb_interface *f)
+{
+ return f->dev.power.power_state.event == PM_EVENT_ON;
+}
+
+
/* for labeling diagnostics */
extern const char *usbcore_name;
@@ -39,9 +63,6 @@
extern int usbdev_init(void);
extern void usbdev_cleanup(void);
-extern void usbdev_add(struct usb_device *dev);
-extern void usbdev_remove(struct usb_device *dev);
-extern struct usb_device *usbdev_lookup_minor(int minor);
struct dev_state {
struct list_head list; /* state list */
@@ -58,3 +79,9 @@
unsigned long ifclaimed;
};
+/* internal notify stuff */
+extern void usb_notify_add_device(struct usb_device *udev);
+extern void usb_notify_remove_device(struct usb_device *udev);
+extern void usb_notify_add_bus(struct usb_bus *ubus);
+extern void usb_notify_remove_bus(struct usb_bus *ubus);
+
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 583db7c..02106be 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -470,7 +470,7 @@
}
static struct usb_request *
-dummy_alloc_request (struct usb_ep *_ep, unsigned mem_flags)
+dummy_alloc_request (struct usb_ep *_ep, gfp_t mem_flags)
{
struct dummy_ep *ep;
struct dummy_request *req;
@@ -507,7 +507,7 @@
struct usb_ep *_ep,
unsigned bytes,
dma_addr_t *dma,
- unsigned mem_flags
+ gfp_t mem_flags
) {
char *retval;
struct dummy_ep *ep;
@@ -541,7 +541,7 @@
static int
dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
- unsigned mem_flags)
+ gfp_t mem_flags)
{
struct dummy_ep *ep;
struct dummy_request *req;
@@ -935,14 +935,10 @@
return 0;
}
-static int dummy_udc_suspend (struct device *dev, pm_message_t state,
- u32 level)
+static int dummy_udc_suspend (struct device *dev, pm_message_t state)
{
struct dummy *dum = dev_get_drvdata(dev);
- if (level != SUSPEND_DISABLE)
- return 0;
-
dev_dbg (dev, "%s\n", __FUNCTION__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 1;
@@ -954,13 +950,10 @@
return 0;
}
-static int dummy_udc_resume (struct device *dev, u32 level)
+static int dummy_udc_resume (struct device *dev)
{
struct dummy *dum = dev_get_drvdata(dev);
- if (level != RESUME_ENABLE)
- return 0;
-
dev_dbg (dev, "%s\n", __FUNCTION__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 0;
@@ -974,6 +967,7 @@
static struct device_driver dummy_udc_driver = {
.name = (char *) gadget_name,
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = dummy_udc_probe,
.remove = dummy_udc_remove,
@@ -999,7 +993,7 @@
struct usb_hcd *hcd,
struct usb_host_endpoint *ep,
struct urb *urb,
- unsigned mem_flags
+ gfp_t mem_flags
) {
struct dummy *dum;
struct urbp *urbp;
@@ -1758,7 +1752,7 @@
return retval;
}
-static int dummy_hub_suspend (struct usb_hcd *hcd)
+static int dummy_bus_suspend (struct usb_hcd *hcd)
{
struct dummy *dum = hcd_to_dummy (hcd);
@@ -1769,7 +1763,7 @@
return 0;
}
-static int dummy_hub_resume (struct usb_hcd *hcd)
+static int dummy_bus_resume (struct usb_hcd *hcd)
{
struct dummy *dum = hcd_to_dummy (hcd);
@@ -1901,8 +1895,8 @@
.hub_status_data = dummy_hub_status,
.hub_control = dummy_hub_control,
- .hub_suspend = dummy_hub_suspend,
- .hub_resume = dummy_hub_resume,
+ .bus_suspend = dummy_bus_suspend,
+ .bus_resume = dummy_bus_resume,
};
static int dummy_hcd_probe (struct device *dev)
@@ -1936,52 +1930,32 @@
return 0;
}
-static int dummy_hcd_suspend (struct device *dev, pm_message_t state,
- u32 level)
+static int dummy_hcd_suspend (struct device *dev, pm_message_t state)
{
struct usb_hcd *hcd;
- if (level != SUSPEND_DISABLE)
- return 0;
-
dev_dbg (dev, "%s\n", __FUNCTION__);
hcd = dev_get_drvdata (dev);
-#ifndef CONFIG_USB_SUSPEND
- /* Otherwise this would never happen */
- usb_lock_device (hcd->self.root_hub);
- dummy_hub_suspend (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
hcd->state = HC_STATE_SUSPENDED;
return 0;
}
-static int dummy_hcd_resume (struct device *dev, u32 level)
+static int dummy_hcd_resume (struct device *dev)
{
struct usb_hcd *hcd;
- if (level != RESUME_ENABLE)
- return 0;
-
dev_dbg (dev, "%s\n", __FUNCTION__);
hcd = dev_get_drvdata (dev);
hcd->state = HC_STATE_RUNNING;
-#ifndef CONFIG_USB_SUSPEND
- /* Otherwise this would never happen */
- usb_lock_device (hcd->self.root_hub);
- dummy_hub_resume (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
usb_hcd_poll_rh_status (hcd);
return 0;
}
static struct device_driver dummy_hcd_driver = {
.name = (char *) driver_name,
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = dummy_hcd_probe,
.remove = dummy_hcd_remove,
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 49459e3..8f402f8 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -945,11 +945,11 @@
/*-------------------------------------------------------------------------*/
-static void eth_start (struct eth_dev *dev, unsigned gfp_flags);
-static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags);
+static void eth_start (struct eth_dev *dev, gfp_t gfp_flags);
+static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags);
static int
-set_ether_config (struct eth_dev *dev, unsigned gfp_flags)
+set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
{
int result = 0;
struct usb_gadget *gadget = dev->gadget;
@@ -1081,7 +1081,7 @@
* that returns config descriptors, and altsetting code.
*/
static int
-eth_set_config (struct eth_dev *dev, unsigned number, unsigned gfp_flags)
+eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags)
{
int result = 0;
struct usb_gadget *gadget = dev->gadget;
@@ -1598,7 +1598,7 @@
static void rx_complete (struct usb_ep *ep, struct usb_request *req);
static int
-rx_submit (struct eth_dev *dev, struct usb_request *req, unsigned gfp_flags)
+rx_submit (struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
{
struct sk_buff *skb;
int retval = -ENOMEM;
@@ -1724,7 +1724,7 @@
}
static int prealloc (struct list_head *list, struct usb_ep *ep,
- unsigned n, unsigned gfp_flags)
+ unsigned n, gfp_t gfp_flags)
{
unsigned i;
struct usb_request *req;
@@ -1763,7 +1763,7 @@
return 0;
}
-static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags)
+static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
{
int status;
@@ -1779,7 +1779,7 @@
return status;
}
-static void rx_fill (struct eth_dev *dev, unsigned gfp_flags)
+static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags)
{
struct usb_request *req;
unsigned long flags;
@@ -1962,7 +1962,7 @@
* normally just one notification will be queued.
*/
-static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, unsigned);
+static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, gfp_t);
static void eth_req_free (struct usb_ep *ep, struct usb_request *req);
static void
@@ -2024,7 +2024,7 @@
#endif /* RNDIS */
-static void eth_start (struct eth_dev *dev, unsigned gfp_flags)
+static void eth_start (struct eth_dev *dev, gfp_t gfp_flags)
{
DEBUG (dev, "%s\n", __FUNCTION__);
@@ -2092,7 +2092,7 @@
/*-------------------------------------------------------------------------*/
static struct usb_request *
-eth_req_alloc (struct usb_ep *ep, unsigned size, unsigned gfp_flags)
+eth_req_alloc (struct usb_ep *ep, unsigned size, gfp_t gfp_flags)
{
struct usb_request *req;
@@ -2533,6 +2533,7 @@
.driver = {
.name = (char *) shortname,
+ .owner = THIS_MODULE,
// .shutdown = ...
// .suspend = ...
// .resume = ...
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index a41d9d4..ea09aaa 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -224,6 +224,7 @@
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/kthread.h>
#include <linux/limits.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -669,7 +670,6 @@
wait_queue_head_t thread_wqh;
int thread_wakeup_needed;
struct completion thread_notifier;
- int thread_pid;
struct task_struct *thread_task;
sigset_t thread_signal_mask;
@@ -1084,7 +1084,6 @@
static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
{
unsigned long flags;
- struct task_struct *thread_task;
/* Do nothing if a higher-priority exception is already in progress.
* If a lower-or-equal priority exception is in progress, preempt it
@@ -1093,9 +1092,9 @@
if (fsg->state <= new_state) {
fsg->exception_req_tag = fsg->ep0_req_tag;
fsg->state = new_state;
- thread_task = fsg->thread_task;
- if (thread_task)
- send_sig_info(SIGUSR1, SEND_SIG_FORCED, thread_task);
+ if (fsg->thread_task)
+ send_sig_info(SIGUSR1, SEND_SIG_FORCED,
+ fsg->thread_task);
}
spin_unlock_irqrestore(&fsg->lock, flags);
}
@@ -3383,11 +3382,6 @@
{
struct fsg_dev *fsg = (struct fsg_dev *) fsg_;
- fsg->thread_task = current;
-
- /* Release all our userspace resources */
- daemonize("file-storage-gadget");
-
/* Allow the thread to be killed by a signal, but set the signal mask
* to block everything but INT, TERM, KILL, and USR1. */
siginitsetinv(&fsg->thread_signal_mask, sigmask(SIGINT) |
@@ -3400,9 +3394,6 @@
* that expects a __user pointer and it will work okay. */
set_fs(get_ds());
- /* Wait for the gadget registration to finish up */
- wait_for_completion(&fsg->thread_notifier);
-
/* The main loop */
while (fsg->state != FSG_STATE_TERMINATED) {
if (exception_in_progress(fsg) || signal_pending(current)) {
@@ -3440,8 +3431,9 @@
spin_unlock_irq(&fsg->lock);
}
+ spin_lock_irq(&fsg->lock);
fsg->thread_task = NULL;
- flush_signals(current);
+ spin_unlock_irq(&fsg->lock);
/* In case we are exiting because of a signal, unregister the
* gadget driver and close the backing file. */
@@ -3831,12 +3823,11 @@
/* Create the LUNs, open their backing files, and register the
* LUN devices in sysfs. */
- fsg->luns = kmalloc(i * sizeof(struct lun), GFP_KERNEL);
+ fsg->luns = kzalloc(i * sizeof(struct lun), GFP_KERNEL);
if (!fsg->luns) {
rc = -ENOMEM;
goto out;
}
- memset(fsg->luns, 0, i * sizeof(struct lun));
fsg->nluns = i;
for (i = 0; i < fsg->nluns; ++i) {
@@ -3959,10 +3950,12 @@
sprintf(&serial[i], "%02X", c);
}
- if ((rc = kernel_thread(fsg_main_thread, fsg, (CLONE_VM | CLONE_FS |
- CLONE_FILES))) < 0)
+ fsg->thread_task = kthread_create(fsg_main_thread, fsg,
+ "file-storage-gadget");
+ if (IS_ERR(fsg->thread_task)) {
+ rc = PTR_ERR(fsg->thread_task);
goto out;
- fsg->thread_pid = rc;
+ }
INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
@@ -3994,7 +3987,12 @@
DBG(fsg, "removable=%d, stall=%d, buflen=%u\n",
mod_data.removable, mod_data.can_stall,
mod_data.buflen);
- DBG(fsg, "I/O thread pid: %d\n", fsg->thread_pid);
+ DBG(fsg, "I/O thread pid: %d\n", fsg->thread_task->pid);
+
+ set_bit(REGISTERED, &fsg->atomic_bitflags);
+
+ /* Tell the thread to start working */
+ wake_up_process(fsg->thread_task);
return 0;
autoconf_fail:
@@ -4046,6 +4044,7 @@
.driver = {
.name = (char *) shortname,
+ .owner = THIS_MODULE,
// .release = ...
// .suspend = ...
// .resume = ...
@@ -4057,10 +4056,9 @@
{
struct fsg_dev *fsg;
- fsg = kmalloc(sizeof *fsg, GFP_KERNEL);
+ fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
if (!fsg)
return -ENOMEM;
- memset(fsg, 0, sizeof *fsg);
spin_lock_init(&fsg->lock);
init_rwsem(&fsg->filesem);
init_waitqueue_head(&fsg->thread_wqh);
@@ -4086,15 +4084,9 @@
if ((rc = fsg_alloc()) != 0)
return rc;
fsg = the_fsg;
- if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) {
+ if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0)
fsg_free(fsg);
- return rc;
- }
- set_bit(REGISTERED, &fsg->atomic_bitflags);
-
- /* Tell the thread to start working */
- complete(&fsg->thread_notifier);
- return 0;
+ return rc;
}
module_init(fsg_init);
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index eaab26f..6544697 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -269,7 +269,7 @@
/*-------------------------------------------------------------------------*/
static struct usb_request *
-goku_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
+goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
{
struct goku_request *req;
@@ -327,7 +327,7 @@
*/
static void *
goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
- dma_addr_t *dma, unsigned gfp_flags)
+ dma_addr_t *dma, gfp_t gfp_flags)
{
void *retval;
struct goku_ep *ep;
@@ -789,7 +789,7 @@
/*-------------------------------------------------------------------------*/
static int
-goku_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
+goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
struct goku_request *req;
struct goku_ep *ep;
@@ -1970,6 +1970,7 @@
static struct pci_driver goku_pci_driver = {
.name = (char *) driver_name,
.id_table = pci_ids,
+ .owner = THIS_MODULE,
.probe = goku_probe,
.remove = goku_remove,
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 4842577..9b36739 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -71,13 +71,13 @@
static int lh7a40x_ep_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *);
static int lh7a40x_ep_disable(struct usb_ep *ep);
-static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, int);
+static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, gfp_t);
static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *);
static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned, dma_addr_t *,
- int);
+ gfp_t);
static void lh7a40x_free_buffer(struct usb_ep *ep, void *, dma_addr_t,
unsigned);
-static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, int);
+static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t);
static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *);
static int lh7a40x_set_halt(struct usb_ep *ep, int);
static int lh7a40x_fifo_status(struct usb_ep *ep);
@@ -1106,7 +1106,7 @@
}
static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep,
- unsigned gfp_flags)
+ gfp_t gfp_flags)
{
struct lh7a40x_request *req;
@@ -1134,7 +1134,7 @@
}
static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes,
- dma_addr_t * dma, unsigned gfp_flags)
+ dma_addr_t * dma, gfp_t gfp_flags)
{
char *retval;
@@ -1158,7 +1158,7 @@
* NOTE: Sets INDEX register
*/
static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req,
- unsigned gfp_flags)
+ gfp_t gfp_flags)
{
struct lh7a40x_request *req;
struct lh7a40x_ep *ep;
@@ -2140,6 +2140,7 @@
static struct device_driver udc_driver = {
.name = (char *)driver_name,
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = lh7a40x_udc_probe,
.remove = lh7a40x_udc_remove
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 477fab2..0dc6bb0 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -376,7 +376,7 @@
/*-------------------------------------------------------------------------*/
static struct usb_request *
-net2280_alloc_request (struct usb_ep *_ep, unsigned gfp_flags)
+net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
struct net2280_ep *ep;
struct net2280_request *req;
@@ -463,7 +463,7 @@
struct usb_ep *_ep,
unsigned bytes,
dma_addr_t *dma,
- unsigned gfp_flags
+ gfp_t gfp_flags
)
{
void *retval;
@@ -897,7 +897,7 @@
/*-------------------------------------------------------------------------*/
static int
-net2280_queue (struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
+net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
struct net2280_request *req;
struct net2280_ep *ep;
@@ -2948,6 +2948,7 @@
static struct pci_driver net2280_pci_driver = {
.name = (char *) driver_name,
.id_table = pci_ids,
+ .owner = THIS_MODULE,
.probe = net2280_probe,
.remove = net2280_remove,
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index ff5533e..41c96b0 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -269,7 +269,7 @@
/*-------------------------------------------------------------------------*/
static struct usb_request *
-omap_alloc_request(struct usb_ep *ep, unsigned gfp_flags)
+omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
{
struct omap_req *req;
@@ -298,7 +298,7 @@
struct usb_ep *_ep,
unsigned bytes,
dma_addr_t *dma,
- unsigned gfp_flags
+ gfp_t gfp_flags
)
{
void *retval;
@@ -691,7 +691,7 @@
}
static void
-finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status)
+finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one)
{
u16 count;
@@ -699,6 +699,8 @@
ep->dma_counter = (u16) (req->req.dma + req->req.actual);
count = dma_dest_len(ep, req->req.dma + req->req.actual);
count += req->req.actual;
+ if (one)
+ count--;
if (count <= req->req.length)
req->req.actual = count;
@@ -747,7 +749,7 @@
if (!list_empty(&ep->queue)) {
req = container_of(ep->queue.next,
struct omap_req, queue);
- finish_out_dma(ep, req, 0);
+ finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB);
}
UDC_IRQ_SRC_REG = UDC_RXN_EOT;
@@ -925,7 +927,7 @@
while (UDC_RXDMA_CFG_REG & mask)
udelay(10);
if (req)
- finish_out_dma(ep, req, -ECONNRESET);
+ finish_out_dma(ep, req, -ECONNRESET, 0);
}
omap_free_dma(ep->lch);
ep->dma_channel = 0;
@@ -937,7 +939,7 @@
/*-------------------------------------------------------------------------*/
static int
-omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
+omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
struct omap_req *req = container_of(_req, struct omap_req, req);
@@ -1786,8 +1788,12 @@
udc->driver->suspend(&udc->gadget);
spin_lock(&udc->lock);
}
+ if (udc->transceiver)
+ otg_set_suspend(udc->transceiver, 1);
} else {
VDBG("resume\n");
+ if (udc->transceiver)
+ otg_set_suspend(udc->transceiver, 0);
if (udc->gadget.speed == USB_SPEED_FULL
&& udc->driver->resume) {
spin_unlock(&udc->lock);
@@ -2909,12 +2915,10 @@
* may involve talking to an external transceiver (e.g. isp1301).
*/
-static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level)
+static int omap_udc_suspend(struct device *dev, pm_message_t message)
{
u32 devstat;
- if (level != SUSPEND_POWER_DOWN)
- return 0;
devstat = UDC_DEVSTAT_REG;
/* we're requesting 48 MHz clock if the pullup is enabled
@@ -2931,11 +2935,8 @@
return 0;
}
-static int omap_udc_resume(struct device *dev, u32 level)
+static int omap_udc_resume(struct device *dev)
{
- if (level != RESUME_POWER_ON)
- return 0;
-
DBG("resume + wakeup/SRP\n");
omap_pullup(&udc->gadget, 1);
@@ -2948,6 +2949,7 @@
static struct device_driver udc_driver = {
.name = (char *) driver_name,
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = omap_udc_probe,
.remove = __exit_p(omap_udc_remove),
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 73f8c94..f83a926 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -332,7 +332,7 @@
* pxa2xx_ep_alloc_request - allocate a request data structure
*/
static struct usb_request *
-pxa2xx_ep_alloc_request (struct usb_ep *_ep, unsigned gfp_flags)
+pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
struct pxa2xx_request *req;
@@ -367,7 +367,7 @@
*/
static void *
pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
- dma_addr_t *dma, unsigned gfp_flags)
+ dma_addr_t *dma, gfp_t gfp_flags)
{
char *retval;
@@ -422,7 +422,7 @@
}
static int
-write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
{
u8 *buf;
unsigned length, count;
@@ -874,7 +874,7 @@
/*-------------------------------------------------------------------------*/
static int
-pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
+pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
struct pxa2xx_request *req;
struct pxa2xx_ep *ep;
@@ -2602,24 +2602,23 @@
* VBUS IRQs should probably be ignored so that the PXA device just acts
* "dead" to USB hosts until system resume.
*/
-static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state)
{
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
- if (level == SUSPEND_POWER_DOWN) {
- if (!udc->mach->udc_command)
- WARN("USB host won't detect disconnect!\n");
- pullup(udc, 0);
- }
+ if (!udc->mach->udc_command)
+ WARN("USB host won't detect disconnect!\n");
+ pullup(udc, 0);
+
return 0;
}
-static int pxa2xx_udc_resume(struct device *dev, u32 level)
+static int pxa2xx_udc_resume(struct device *dev)
{
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
- if (level == RESUME_POWER_ON)
- pullup(udc, 1);
+ pullup(udc, 1);
+
return 0;
}
@@ -2632,6 +2631,7 @@
static struct device_driver udc_driver = {
.name = "pxa2xx-udc",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = pxa2xx_udc_probe,
.shutdown = pxa2xx_udc_shutdown,
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index a58f3e6..19a883f 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -69,11 +69,11 @@
* UDDR = UDC Endpoint Data Register (the fifo)
* DRCM = DMA Request Channel Map
*/
- volatile unsigned long *reg_udccs;
- volatile unsigned long *reg_ubcr;
- volatile unsigned long *reg_uddr;
+ volatile u32 *reg_udccs;
+ volatile u32 *reg_ubcr;
+ volatile u32 *reg_uddr;
#ifdef USE_DMA
- volatile unsigned long *reg_drcmr;
+ volatile u32 *reg_drcmr;
#define drcmr(n) .reg_drcmr = & DRCMR ## n ,
#else
#define drcmr(n)
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index c925d92..b35ac6d 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -300,18 +300,18 @@
u8 type, unsigned int index, int is_otg);
static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
- unsigned kmalloc_flags);
+ gfp_t kmalloc_flags);
static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
- unsigned kmalloc_flags);
+ gfp_t kmalloc_flags);
static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
-static int gs_alloc_ports(struct gs_dev *dev, unsigned kmalloc_flags);
+static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
static void gs_free_ports(struct gs_dev *dev);
/* circular buffer */
-static struct gs_buf *gs_buf_alloc(unsigned int size, unsigned kmalloc_flags);
+static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
static void gs_buf_free(struct gs_buf *gb);
static void gs_buf_clear(struct gs_buf *gb);
static unsigned int gs_buf_data_avail(struct gs_buf *gb);
@@ -2091,7 +2091,7 @@
* usb_request or NULL if there is an error.
*/
static struct usb_request *
-gs_alloc_req(struct usb_ep *ep, unsigned int len, unsigned kmalloc_flags)
+gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
{
struct usb_request *req;
@@ -2132,7 +2132,7 @@
* endpoint, buffer len, and kmalloc flags.
*/
static struct gs_req_entry *
-gs_alloc_req_entry(struct usb_ep *ep, unsigned len, unsigned kmalloc_flags)
+gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
{
struct gs_req_entry *req;
@@ -2173,7 +2173,7 @@
*
* The device lock is normally held when calling this function.
*/
-static int gs_alloc_ports(struct gs_dev *dev, unsigned kmalloc_flags)
+static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
{
int i;
struct gs_port *port;
@@ -2255,7 +2255,7 @@
*
* Allocate a circular buffer and all associated memory.
*/
-static struct gs_buf *gs_buf_alloc(unsigned int size, unsigned kmalloc_flags)
+static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
{
struct gs_buf *gb;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 6890e77..6c58636 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -612,7 +612,7 @@
}
static struct usb_request *
-source_sink_start_ep (struct usb_ep *ep, unsigned gfp_flags)
+source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
{
struct usb_request *req;
int status;
@@ -640,7 +640,7 @@
}
static int
-set_source_sink_config (struct zero_dev *dev, unsigned gfp_flags)
+set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags)
{
int result = 0;
struct usb_ep *ep;
@@ -744,7 +744,7 @@
}
static int
-set_loopback_config (struct zero_dev *dev, unsigned gfp_flags)
+set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags)
{
int result = 0;
struct usb_ep *ep;
@@ -845,7 +845,7 @@
* by limiting configuration choices (like the pxa2xx).
*/
static int
-zero_set_config (struct zero_dev *dev, unsigned number, unsigned gfp_flags)
+zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags)
{
int result = 0;
struct usb_gadget *gadget = dev->gadget;
@@ -1302,6 +1302,7 @@
.driver = {
.name = (char *) shortname,
+ .owner = THIS_MODULE,
// .shutdown = ...
// .suspend = ...
// .resume = ...
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 350d14f..58321d3 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -1,8 +1,9 @@
#
-# Makefile for USB Host Controller Driver
-# framework and drivers
+# Makefile for USB Host Controller Drivers
#
+obj-$(CONFIG_PCI) += pci-quirks.o
+
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b948ffd..af3c05e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -182,6 +182,9 @@
{
u32 temp = readl (&ehci->regs->status);
+ /* disable any irqs left enabled by previous code */
+ writel (0, &ehci->regs->intr_enable);
+
if ((temp & STS_HALT) != 0)
return 0;
@@ -297,50 +300,17 @@
spin_unlock_irqrestore (&ehci->lock, flags);
}
-#ifdef CONFIG_PCI
-
-/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
- * off the controller (maybe it can boot from highspeed USB disks).
+/* Reboot notifiers kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
*/
-static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
-{
- struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
-
- /* always say Linux will own the hardware */
- pci_write_config_byte(pdev, where + 3, 1);
-
- /* maybe wait a while for BIOS to respond */
- if (cap & (1 << 16)) {
- int msec = 5000;
-
- do {
- msleep(10);
- msec -= 10;
- pci_read_config_dword(pdev, where, &cap);
- } while ((cap & (1 << 16)) && msec);
- if (cap & (1 << 16)) {
- ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
- where, cap);
- // some BIOS versions seem buggy...
- // return 1;
- ehci_warn (ehci, "continuing after BIOS bug...\n");
- /* disable all SMIs, and clear "BIOS owns" flag */
- pci_write_config_dword(pdev, where + 4, 0);
- pci_write_config_byte(pdev, where + 2, 0);
- } else
- ehci_dbg(ehci, "BIOS handoff succeeded\n");
- }
- return 0;
-}
-
-#endif
-
static int
ehci_reboot (struct notifier_block *self, unsigned long code, void *null)
{
struct ehci_hcd *ehci;
ehci = container_of (self, struct ehci_hcd, reboot_notifier);
+ (void) ehci_halt (ehci);
/* make BIOS/etc use companion controller during reboot */
writel (0, &ehci->regs->configured_flag);
@@ -363,156 +333,90 @@
msleep(20);
}
+/*-------------------------------------------------------------------------*/
-/* called by khubd or root hub init threads */
-
-static int ehci_hc_reset (struct usb_hcd *hcd)
+/*
+ * ehci_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping ehci->lock.
+ */
+static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- u32 temp;
- unsigned count = 256/4;
+ timer_action_done (ehci, TIMER_IO_WATCHDOG);
+ if (ehci->reclaim_ready)
+ end_unlink_async (ehci, regs);
- spin_lock_init (&ehci->lock);
+ /* another CPU may drop ehci->lock during a schedule scan while
+ * it reports urb completions. this flag guards against bogus
+ * attempts at re-entrant schedule scanning.
+ */
+ if (ehci->scanning)
+ return;
+ ehci->scanning = 1;
+ scan_async (ehci, regs);
+ if (ehci->next_uframe != -1)
+ scan_periodic (ehci, regs);
+ ehci->scanning = 0;
- ehci->caps = hcd->regs;
- ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
- dbg_hcs_params (ehci, "reset");
- dbg_hcc_params (ehci, "reset");
-
- /* cache this readonly data; minimize chip reads */
- ehci->hcs_params = readl (&ehci->caps->hcs_params);
-
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-
- switch (pdev->vendor) {
- case PCI_VENDOR_ID_TDI:
- if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
- ehci->is_tdi_rh_tt = 1;
- tdi_reset (ehci);
- }
- break;
- case PCI_VENDOR_ID_AMD:
- /* AMD8111 EHCI doesn't work, according to AMD errata */
- if (pdev->device == 0x7463) {
- ehci_info (ehci, "ignoring AMD8111 (errata)\n");
- return -EIO;
- }
- break;
- case PCI_VENDOR_ID_NVIDIA:
- /* NVidia reports that certain chips don't handle
- * QH, ITD, or SITD addresses above 2GB. (But TD,
- * data buffer, and periodic schedule are normal.)
- */
- switch (pdev->device) {
- case 0x003c: /* MCP04 */
- case 0x005b: /* CK804 */
- case 0x00d8: /* CK8 */
- case 0x00e8: /* CK8S */
- if (pci_set_consistent_dma_mask(pdev,
- DMA_31BIT_MASK) < 0)
- ehci_warn (ehci, "can't enable NVidia "
- "workaround for >2GB RAM\n");
- break;
- }
- break;
- }
-
- /* optional debug port, normally in the first BAR */
- temp = pci_find_capability (pdev, 0x0a);
- if (temp) {
- pci_read_config_dword(pdev, temp, &temp);
- temp >>= 16;
- if ((temp & (3 << 13)) == (1 << 13)) {
- temp &= 0x1fff;
- ehci->debug = hcd->regs + temp;
- temp = readl (&ehci->debug->control);
- ehci_info (ehci, "debug port %d%s\n",
- HCS_DEBUG_PORT(ehci->hcs_params),
- (temp & DBGP_ENABLED)
- ? " IN USE"
- : "");
- if (!(temp & DBGP_ENABLED))
- ehci->debug = NULL;
- }
- }
-
- temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
- } else
- temp = 0;
-
- /* EHCI 0.96 and later may have "extended capabilities" */
- while (temp && count--) {
- u32 cap;
-
- pci_read_config_dword (to_pci_dev(hcd->self.controller),
- temp, &cap);
- ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
- switch (cap & 0xff) {
- case 1: /* BIOS/SMM/... handoff */
- if (bios_handoff (ehci, temp, cap) != 0)
- return -EOPNOTSUPP;
- break;
- case 0: /* illegal reserved capability */
- ehci_warn (ehci, "illegal capability!\n");
- cap = 0;
- /* FALLTHROUGH */
- default: /* unknown */
- break;
- }
- temp = (cap >> 8) & 0xff;
- }
- if (!count) {
- ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
- return -EIO;
- }
- if (ehci_is_TDI(ehci))
- ehci_reset (ehci);
-#endif
-
- ehci_port_power (ehci, 0);
-
- /* at least the Genesys GL880S needs fixup here */
- temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
- temp &= 0x0f;
- if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
- ehci_dbg (ehci, "bogus port configuration: "
- "cc=%d x pcc=%d < ports=%d\n",
- HCS_N_CC(ehci->hcs_params),
- HCS_N_PCC(ehci->hcs_params),
- HCS_N_PORTS(ehci->hcs_params));
-
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev;
-
- pdev = to_pci_dev(hcd->self.controller);
- switch (pdev->vendor) {
- case 0x17a0: /* GENESYS */
- /* GL880S: should be PORTS=2 */
- temp |= (ehci->hcs_params & ~0xf);
- ehci->hcs_params = temp;
- break;
- case PCI_VENDOR_ID_NVIDIA:
- /* NF4: should be PCC=10 */
- break;
- }
- }
-#endif
- }
-
- /* force HC to halt state */
- return ehci_halt (ehci);
+ /* the IO watchdog guards against hardware or driver bugs that
+ * misplace IRQs, and should let us run completely without IRQs.
+ * such lossage has been observed on both VT6202 and VT8235.
+ */
+ if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
+ (ehci->async->qh_next.ptr != NULL ||
+ ehci->periodic_sched != 0))
+ timer_action (ehci, TIMER_IO_WATCHDOG);
}
-static int ehci_start (struct usb_hcd *hcd)
+static void ehci_stop (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+
+ ehci_dbg (ehci, "stop\n");
+
+ /* Turn off port power on all root hub ports. */
+ ehci_port_power (ehci, 0);
+
+ /* no more interrupts ... */
+ del_timer_sync (&ehci->watchdog);
+
+ spin_lock_irq(&ehci->lock);
+ if (HC_IS_RUNNING (hcd->state))
+ ehci_quiesce (ehci);
+
+ ehci_reset (ehci);
+ writel (0, &ehci->regs->intr_enable);
+ spin_unlock_irq(&ehci->lock);
+
+ /* let companion controllers work when we aren't */
+ writel (0, &ehci->regs->configured_flag);
+ unregister_reboot_notifier (&ehci->reboot_notifier);
+
+ remove_debug_files (ehci);
+
+ /* root hub is shut down separately (first, when possible) */
+ spin_lock_irq (&ehci->lock);
+ if (ehci->async)
+ ehci_work (ehci, NULL);
+ spin_unlock_irq (&ehci->lock);
+ ehci_mem_cleanup (ehci);
+
+#ifdef EHCI_STATS
+ ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
+ ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
+ ehci->stats.lost_iaa);
+ ehci_dbg (ehci, "complete %ld unlink %ld\n",
+ ehci->stats.complete, ehci->stats.unlink);
+#endif
+
+ dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
+}
+
+static int ehci_run (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
int retval;
u32 hcc_params;
- u8 sbrn = 0;
int first;
/* skip some things on restart paths */
@@ -551,27 +455,6 @@
}
writel (ehci->periodic_dma, &ehci->regs->frame_list);
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev;
- u16 port_wake;
-
- pdev = to_pci_dev(hcd->self.controller);
-
- /* Serial Bus Release Number is at PCI 0x60 offset */
- pci_read_config_byte(pdev, 0x60, &sbrn);
-
- /* port wake capability, reported by boot firmware */
- pci_read_config_word(pdev, 0x62, &port_wake);
- hcd->can_wakeup = (port_wake & 1) != 0;
-
- /* help hc dma work well with cachelines */
- retval = pci_set_mwi(pdev);
- if (retval)
- ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
- }
-#endif
-
/*
* dedicate a qh for the async ring head, since we couldn't unlink
* a 'real' qh without stopping the async schedule [4.8]. use it
@@ -667,7 +550,7 @@
temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
ehci_info (ehci,
"USB %x.%x %s, EHCI %x.%02x, driver %s\n",
- ((sbrn & 0xf0)>>4), (sbrn & 0x0f),
+ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
first ? "initialized" : "restarted",
temp >> 8, temp & 0xff, DRIVER_VERSION);
@@ -679,188 +562,6 @@
return 0;
}
-/* always called by thread; normally rmmod */
-
-static void ehci_stop (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-
- ehci_dbg (ehci, "stop\n");
-
- /* Turn off port power on all root hub ports. */
- ehci_port_power (ehci, 0);
-
- /* no more interrupts ... */
- del_timer_sync (&ehci->watchdog);
-
- spin_lock_irq(&ehci->lock);
- if (HC_IS_RUNNING (hcd->state))
- ehci_quiesce (ehci);
-
- ehci_reset (ehci);
- writel (0, &ehci->regs->intr_enable);
- spin_unlock_irq(&ehci->lock);
-
- /* let companion controllers work when we aren't */
- writel (0, &ehci->regs->configured_flag);
- unregister_reboot_notifier (&ehci->reboot_notifier);
-
- remove_debug_files (ehci);
-
- /* root hub is shut down separately (first, when possible) */
- spin_lock_irq (&ehci->lock);
- if (ehci->async)
- ehci_work (ehci, NULL);
- spin_unlock_irq (&ehci->lock);
- ehci_mem_cleanup (ehci);
-
-#ifdef EHCI_STATS
- ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
- ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
- ehci->stats.lost_iaa);
- ehci_dbg (ehci, "complete %ld unlink %ld\n",
- ehci->stats.complete, ehci->stats.unlink);
-#endif
-
- dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
-}
-
-static int ehci_get_frame (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_PM
-
-/* suspend/resume, section 4.3 */
-
-/* These routines rely on the bus (pci, platform, etc)
- * to handle powerdown and wakeup, and currently also on
- * transceivers that don't need any software attention to set up
- * the right sort of wakeup.
- */
-
-static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-
- if (time_before (jiffies, ehci->next_statechange))
- msleep (100);
-
-#ifdef CONFIG_USB_SUSPEND
- (void) usb_suspend_device (hcd->self.root_hub, message);
-#else
- usb_lock_device (hcd->self.root_hub);
- (void) ehci_hub_suspend (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
- // save (PCI) FLADJ in case of Vaux power loss
- // ... we'd only use it to handle clock skew
-
- return 0;
-}
-
-static int ehci_resume (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- unsigned port;
- struct usb_device *root = hcd->self.root_hub;
- int retval = -EINVAL;
-
- // maybe restore (PCI) FLADJ
-
- if (time_before (jiffies, ehci->next_statechange))
- msleep (100);
-
- /* If any port is suspended (or owned by the companion),
- * we know we can/must resume the HC (and mustn't reset it).
- */
- for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
- u32 status;
- port--;
- status = readl (&ehci->regs->port_status [port]);
- if (!(status & PORT_POWER))
- continue;
- if (status & (PORT_SUSPEND | PORT_OWNER)) {
- down (&hcd->self.root_hub->serialize);
- retval = ehci_hub_resume (hcd);
- up (&hcd->self.root_hub->serialize);
- break;
- }
- if (!root->children [port])
- continue;
- dbg_port (ehci, __FUNCTION__, port + 1, status);
- usb_set_device_state (root->children[port],
- USB_STATE_NOTATTACHED);
- }
-
- /* Else reset, to cope with power loss or flush-to-storage
- * style "resume" having activated BIOS during reboot.
- */
- if (port == 0) {
- (void) ehci_halt (ehci);
- (void) ehci_reset (ehci);
- (void) ehci_hc_reset (hcd);
-
- /* emptying the schedule aborts any urbs */
- spin_lock_irq (&ehci->lock);
- if (ehci->reclaim)
- ehci->reclaim_ready = 1;
- ehci_work (ehci, NULL);
- spin_unlock_irq (&ehci->lock);
-
- /* restart; khubd will disconnect devices */
- retval = ehci_start (hcd);
-
- /* here we "know" root ports should always stay powered;
- * but some controllers may lose all power.
- */
- ehci_port_power (ehci, 1);
- }
-
- return retval;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * ehci_work is called from some interrupts, timers, and so on.
- * it calls driver completion functions, after dropping ehci->lock.
- */
-static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
-{
- timer_action_done (ehci, TIMER_IO_WATCHDOG);
- if (ehci->reclaim_ready)
- end_unlink_async (ehci, regs);
-
- /* another CPU may drop ehci->lock during a schedule scan while
- * it reports urb completions. this flag guards against bogus
- * attempts at re-entrant schedule scanning.
- */
- if (ehci->scanning)
- return;
- ehci->scanning = 1;
- scan_async (ehci, regs);
- if (ehci->next_uframe != -1)
- scan_periodic (ehci, regs);
- ehci->scanning = 0;
-
- /* the IO watchdog guards against hardware or driver bugs that
- * misplace IRQs, and should let us run completely without IRQs.
- * such lossage has been observed on both VT6202 and VT8235.
- */
- if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
- (ehci->async->qh_next.ptr != NULL ||
- ehci->periodic_sched != 0))
- timer_action (ehci, TIMER_IO_WATCHDOG);
-}
-
/*-------------------------------------------------------------------------*/
static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
@@ -983,7 +684,7 @@
struct usb_hcd *hcd,
struct usb_host_endpoint *ep,
struct urb *urb,
- unsigned mem_flags
+ gfp_t mem_flags
) {
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
struct list_head qtd_list;
@@ -1171,106 +872,24 @@
return;
}
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ehci_driver = {
- .description = hcd_name,
- .product_desc = "EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_hc_reset,
- .start = ehci_start,
-#ifdef CONFIG_PM
- .suspend = ehci_suspend,
- .resume = ehci_resume,
-#endif
- .stop = ehci_stop,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .hub_suspend = ehci_hub_suspend,
- .hub_resume = ehci_hub_resume,
-};
+static int ehci_get_frame (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
+}
/*-------------------------------------------------------------------------*/
-/* EHCI 1.0 doesn't require PCI */
-
-#ifdef CONFIG_PCI
-
-/* PCI driver selection metadata; PCI hotplugging uses this */
-static const struct pci_device_id pci_ids [] = { {
- /* handle any USB 2.0 EHCI controller */
- PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
- .driver_data = (unsigned long) &ehci_driver,
- },
- { /* end: all zeroes */ }
-};
-MODULE_DEVICE_TABLE (pci, pci_ids);
-
-/* pci driver glue; this is a "new style" PCI driver module */
-static struct pci_driver ehci_pci_driver = {
- .name = (char *) hcd_name,
- .id_table = pci_ids,
-
- .probe = usb_hcd_pci_probe,
- .remove = usb_hcd_pci_remove,
-
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
-#endif
-};
-
-#endif /* PCI */
-
-
#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
MODULE_DESCRIPTION (DRIVER_INFO);
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
-static int __init init (void)
-{
- if (usb_disabled())
- return -ENODEV;
+#ifdef CONFIG_PCI
+#include "ehci-pci.c"
+#endif
- pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
- hcd_name,
- sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
- sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
-
- return pci_register_driver (&ehci_pci_driver);
-}
-module_init (init);
-
-static void __exit cleanup (void)
-{
- pci_unregister_driver (&ehci_pci_driver);
-}
-module_exit (cleanup);
+#if !defined(CONFIG_PCI)
+#error "missing bus glue for ehci-hcd"
+#endif
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 18d3f22..88cb4ad 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -30,7 +30,7 @@
#ifdef CONFIG_PM
-static int ehci_hub_suspend (struct usb_hcd *hcd)
+static int ehci_bus_suspend (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int port;
@@ -83,7 +83,7 @@
/* caller has locked the root hub, and should reset/reinit on error */
-static int ehci_hub_resume (struct usb_hcd *hcd)
+static int ehci_bus_resume (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
@@ -159,8 +159,8 @@
#else
-#define ehci_hub_suspend NULL
-#define ehci_hub_resume NULL
+#define ehci_bus_suspend NULL
+#define ehci_bus_resume NULL
#endif /* CONFIG_PM */
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 5c38ad8..91c2ab43 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -45,7 +45,7 @@
INIT_LIST_HEAD (&qtd->qtd_list);
}
-static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, int flags)
+static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, gfp_t flags)
{
struct ehci_qtd *qtd;
dma_addr_t dma;
@@ -79,7 +79,7 @@
dma_pool_free (ehci->qh_pool, qh, qh->qh_dma);
}
-static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, int flags)
+static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
{
struct ehci_qh *qh;
dma_addr_t dma;
@@ -161,7 +161,7 @@
}
/* remember to add cleanup code (above) if you add anything here */
-static int ehci_mem_init (struct ehci_hcd *ehci, int flags)
+static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
{
int i;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
new file mode 100644
index 0000000..1450088
--- /dev/null
+++ b/drivers/usb/host/ehci-pci.c
@@ -0,0 +1,415 @@
+/*
+ * EHCI HCD (Host Controller Driver) PCI Bus Glue.
+ *
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef CONFIG_PCI
+#error "This file is PCI bus glue. CONFIG_PCI must be defined."
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
+ * off the controller (maybe it can boot from highspeed USB disks).
+ */
+static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
+{
+ struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
+
+ /* always say Linux will own the hardware */
+ pci_write_config_byte(pdev, where + 3, 1);
+
+ /* maybe wait a while for BIOS to respond */
+ if (cap & (1 << 16)) {
+ int msec = 5000;
+
+ do {
+ msleep(10);
+ msec -= 10;
+ pci_read_config_dword(pdev, where, &cap);
+ } while ((cap & (1 << 16)) && msec);
+ if (cap & (1 << 16)) {
+ ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
+ where, cap);
+ // some BIOS versions seem buggy...
+ // return 1;
+ ehci_warn (ehci, "continuing after BIOS bug...\n");
+ /* disable all SMIs, and clear "BIOS owns" flag */
+ pci_write_config_dword(pdev, where + 4, 0);
+ pci_write_config_byte(pdev, where + 2, 0);
+ } else
+ ehci_dbg(ehci, "BIOS handoff succeeded\n");
+ }
+ return 0;
+}
+
+/* called by khubd or root hub init threads */
+static int ehci_pci_reset (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ u32 temp;
+ unsigned count = 256/4;
+
+ spin_lock_init (&ehci->lock);
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
+ dbg_hcs_params (ehci, "reset");
+ dbg_hcc_params (ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl (&ehci->caps->hcs_params);
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ switch (pdev->vendor) {
+ case PCI_VENDOR_ID_TDI:
+ if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
+ ehci->is_tdi_rh_tt = 1;
+ tdi_reset (ehci);
+ }
+ break;
+ case PCI_VENDOR_ID_AMD:
+ /* AMD8111 EHCI doesn't work, according to AMD errata */
+ if (pdev->device == 0x7463) {
+ ehci_info (ehci, "ignoring AMD8111 (errata)\n");
+ return -EIO;
+ }
+ break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NVidia reports that certain chips don't handle
+ * QH, ITD, or SITD addresses above 2GB. (But TD,
+ * data buffer, and periodic schedule are normal.)
+ */
+ switch (pdev->device) {
+ case 0x003c: /* MCP04 */
+ case 0x005b: /* CK804 */
+ case 0x00d8: /* CK8 */
+ case 0x00e8: /* CK8S */
+ if (pci_set_consistent_dma_mask(pdev,
+ DMA_31BIT_MASK) < 0)
+ ehci_warn (ehci, "can't enable NVidia "
+ "workaround for >2GB RAM\n");
+ break;
+ }
+ break;
+ }
+
+ /* optional debug port, normally in the first BAR */
+ temp = pci_find_capability (pdev, 0x0a);
+ if (temp) {
+ pci_read_config_dword(pdev, temp, &temp);
+ temp >>= 16;
+ if ((temp & (3 << 13)) == (1 << 13)) {
+ temp &= 0x1fff;
+ ehci->debug = hcd->regs + temp;
+ temp = readl (&ehci->debug->control);
+ ehci_info (ehci, "debug port %d%s\n",
+ HCS_DEBUG_PORT(ehci->hcs_params),
+ (temp & DBGP_ENABLED)
+ ? " IN USE"
+ : "");
+ if (!(temp & DBGP_ENABLED))
+ ehci->debug = NULL;
+ }
+ }
+
+ temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
+ } else
+ temp = 0;
+
+ /* EHCI 0.96 and later may have "extended capabilities" */
+ while (temp && count--) {
+ u32 cap;
+
+ pci_read_config_dword (to_pci_dev(hcd->self.controller),
+ temp, &cap);
+ ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
+ switch (cap & 0xff) {
+ case 1: /* BIOS/SMM/... handoff */
+ if (bios_handoff (ehci, temp, cap) != 0)
+ return -EOPNOTSUPP;
+ break;
+ case 0: /* illegal reserved capability */
+ ehci_warn (ehci, "illegal capability!\n");
+ cap = 0;
+ /* FALLTHROUGH */
+ default: /* unknown */
+ break;
+ }
+ temp = (cap >> 8) & 0xff;
+ }
+ if (!count) {
+ ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
+ return -EIO;
+ }
+ if (ehci_is_TDI(ehci))
+ ehci_reset (ehci);
+
+ ehci_port_power (ehci, 0);
+
+ /* at least the Genesys GL880S needs fixup here */
+ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
+ temp &= 0x0f;
+ if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
+ ehci_dbg (ehci, "bogus port configuration: "
+ "cc=%d x pcc=%d < ports=%d\n",
+ HCS_N_CC(ehci->hcs_params),
+ HCS_N_PCC(ehci->hcs_params),
+ HCS_N_PORTS(ehci->hcs_params));
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(hcd->self.controller);
+ switch (pdev->vendor) {
+ case 0x17a0: /* GENESYS */
+ /* GL880S: should be PORTS=2 */
+ temp |= (ehci->hcs_params & ~0xf);
+ ehci->hcs_params = temp;
+ break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NF4: should be PCC=10 */
+ break;
+ }
+ }
+ }
+
+ /* force HC to halt state */
+ return ehci_halt (ehci);
+}
+
+static int ehci_pci_start (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ int result = 0;
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev;
+ u16 port_wake;
+
+ pdev = to_pci_dev(hcd->self.controller);
+
+ /* Serial Bus Release Number is at PCI 0x60 offset */
+ pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+
+ /* port wake capability, reported by boot firmware */
+ pci_read_config_word(pdev, 0x62, &port_wake);
+ hcd->can_wakeup = (port_wake & 1) != 0;
+
+ /* help hc dma work well with cachelines */
+ result = pci_set_mwi(pdev);
+ if (result)
+ ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
+ }
+
+ return ehci_run (hcd);
+}
+
+/* always called by thread; normally rmmod */
+
+static void ehci_pci_stop (struct usb_hcd *hcd)
+{
+ ehci_stop (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+/* suspend/resume, section 4.3 */
+
+/* These routines rely on the bus (pci, platform, etc)
+ * to handle powerdown and wakeup, and currently also on
+ * transceivers that don't need any software attention to set up
+ * the right sort of wakeup.
+ */
+
+static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep (100);
+
+#ifdef CONFIG_USB_SUSPEND
+ (void) usb_suspend_device (hcd->self.root_hub);
+#else
+ usb_lock_device (hcd->self.root_hub);
+ (void) ehci_bus_suspend (hcd);
+ usb_unlock_device (hcd->self.root_hub);
+#endif
+
+ // save (PCI) FLADJ in case of Vaux power loss
+ // ... we'd only use it to handle clock skew
+
+ return 0;
+}
+
+static int ehci_pci_resume (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ unsigned port;
+ struct usb_device *root = hcd->self.root_hub;
+ int retval = -EINVAL;
+
+ // maybe restore (PCI) FLADJ
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep (100);
+
+ /* If any port is suspended (or owned by the companion),
+ * we know we can/must resume the HC (and mustn't reset it).
+ */
+ for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
+ u32 status;
+ port--;
+ status = readl (&ehci->regs->port_status [port]);
+ if (!(status & PORT_POWER))
+ continue;
+ if (status & (PORT_SUSPEND | PORT_OWNER)) {
+ down (&hcd->self.root_hub->serialize);
+ retval = ehci_bus_resume (hcd);
+ up (&hcd->self.root_hub->serialize);
+ break;
+ }
+ if (!root->children [port])
+ continue;
+ dbg_port (ehci, __FUNCTION__, port + 1, status);
+ usb_set_device_state (root->children[port],
+ USB_STATE_NOTATTACHED);
+ }
+
+ /* Else reset, to cope with power loss or flush-to-storage
+ * style "resume" having activated BIOS during reboot.
+ */
+ if (port == 0) {
+ (void) ehci_halt (ehci);
+ (void) ehci_reset (ehci);
+ (void) ehci_pci_reset (hcd);
+
+ /* emptying the schedule aborts any urbs */
+ spin_lock_irq (&ehci->lock);
+ if (ehci->reclaim)
+ ehci->reclaim_ready = 1;
+ ehci_work (ehci, NULL);
+ spin_unlock_irq (&ehci->lock);
+
+ /* restart; khubd will disconnect devices */
+ retval = ehci_run (hcd);
+
+ /* here we "know" root ports should always stay powered;
+ * but some controllers may lose all power.
+ */
+ ehci_port_power (ehci, 1);
+ }
+
+ return retval;
+}
+#endif
+
+static const struct hc_driver ehci_pci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_pci_reset,
+ .start = ehci_pci_start,
+#ifdef CONFIG_PM
+ .suspend = ehci_pci_suspend,
+ .resume = ehci_pci_resume,
+#endif
+ .stop = ehci_pci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids [] = { {
+ /* handle any USB 2.0 EHCI controller */
+ PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
+ .driver_data = (unsigned long) &ehci_pci_hc_driver,
+ },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver ehci_pci_driver = {
+ .name = (char *) hcd_name,
+ .id_table = pci_ids,
+ .owner = THIS_MODULE,
+
+ .probe = usb_hcd_pci_probe,
+ .remove = usb_hcd_pci_remove,
+
+#ifdef CONFIG_PM
+ .suspend = usb_hcd_pci_suspend,
+ .resume = usb_hcd_pci_resume,
+#endif
+};
+
+static int __init ehci_hcd_pci_init (void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
+ hcd_name,
+ sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
+ sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
+
+ return pci_register_driver (&ehci_pci_driver);
+}
+module_init (ehci_hcd_pci_init);
+
+static void __exit ehci_hcd_pci_cleanup (void)
+{
+ pci_unregister_driver (&ehci_pci_driver);
+}
+module_exit (ehci_hcd_pci_cleanup);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 940d38c..5bb872c 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -477,7 +477,7 @@
struct ehci_hcd *ehci,
struct urb *urb,
struct list_head *head,
- int flags
+ gfp_t flags
) {
struct ehci_qtd *qtd, *qtd_prev;
dma_addr_t buf;
@@ -629,7 +629,7 @@
qh_make (
struct ehci_hcd *ehci,
struct urb *urb,
- int flags
+ gfp_t flags
) {
struct ehci_qh *qh = ehci_qh_alloc (ehci, flags);
u32 info1 = 0, info2 = 0;
@@ -906,7 +906,7 @@
struct usb_host_endpoint *ep,
struct urb *urb,
struct list_head *qtd_list,
- unsigned mem_flags
+ gfp_t mem_flags
) {
struct ehci_qtd *qtd;
int epnum;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index ccc7300..f0c8aa1 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -589,7 +589,7 @@
struct usb_host_endpoint *ep,
struct urb *urb,
struct list_head *qtd_list,
- unsigned mem_flags
+ gfp_t mem_flags
) {
unsigned epnum;
unsigned long flags;
@@ -634,7 +634,7 @@
/* ehci_iso_stream ops work with both ITD and SITD */
static struct ehci_iso_stream *
-iso_stream_alloc (unsigned mem_flags)
+iso_stream_alloc (gfp_t mem_flags)
{
struct ehci_iso_stream *stream;
@@ -851,7 +851,7 @@
/* ehci_iso_sched ops can be ITD-only or SITD-only */
static struct ehci_iso_sched *
-iso_sched_alloc (unsigned packets, unsigned mem_flags)
+iso_sched_alloc (unsigned packets, gfp_t mem_flags)
{
struct ehci_iso_sched *iso_sched;
int size = sizeof *iso_sched;
@@ -924,7 +924,7 @@
struct ehci_iso_stream *stream,
struct ehci_hcd *ehci,
struct urb *urb,
- unsigned mem_flags
+ gfp_t mem_flags
)
{
struct ehci_itd *itd;
@@ -1418,7 +1418,7 @@
/*-------------------------------------------------------------------------*/
static int itd_submit (struct ehci_hcd *ehci, struct urb *urb,
- unsigned mem_flags)
+ gfp_t mem_flags)
{
int status = -EINVAL;
unsigned long flags;
@@ -1529,7 +1529,7 @@
struct ehci_iso_stream *stream,
struct ehci_hcd *ehci,
struct urb *urb,
- unsigned mem_flags
+ gfp_t mem_flags
)
{
struct ehci_sitd *sitd;
@@ -1779,7 +1779,7 @@
static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
- unsigned mem_flags)
+ gfp_t mem_flags)
{
int status = -EINVAL;
unsigned long flags;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index f34a051..18e257c 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -97,6 +97,7 @@
#else
# define COUNT(x) do {} while (0)
#endif
+ u8 sbrn; /* packed release number */
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index e142056..ddb8fc5 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -638,7 +638,7 @@
+ msecs_to_jiffies(20) + 1);
if (intstat & HCINT_RD) {
DBG("---- remote wakeup\n");
- schedule_work(&isp116x->rh_resume);
+ usb_hcd_resume_root_hub(hcd);
ret = IRQ_HANDLED;
}
irqstat &= ~HCuPINT_OPR;
@@ -694,7 +694,7 @@
static int isp116x_urb_enqueue(struct usb_hcd *hcd,
struct usb_host_endpoint *hep, struct urb *urb,
- unsigned mem_flags)
+ gfp_t mem_flags)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
struct usb_device *udev = urb->dev;
@@ -1160,7 +1160,7 @@
#ifdef CONFIG_PM
-static int isp116x_hub_suspend(struct usb_hcd *hcd)
+static int isp116x_bus_suspend(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
unsigned long flags;
@@ -1200,7 +1200,7 @@
return ret;
}
-static int isp116x_hub_resume(struct usb_hcd *hcd)
+static int isp116x_bus_resume(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
u32 val;
@@ -1263,21 +1263,11 @@
return 0;
}
-static void isp116x_rh_resume(void *_hcd)
-{
- struct usb_hcd *hcd = _hcd;
-
- usb_resume_device(hcd->self.root_hub);
-}
#else
-#define isp116x_hub_suspend NULL
-#define isp116x_hub_resume NULL
-
-static void isp116x_rh_resume(void *_hcd)
-{
-}
+#define isp116x_bus_suspend NULL
+#define isp116x_bus_resume NULL
#endif
@@ -1636,8 +1626,8 @@
.hub_status_data = isp116x_hub_status_data,
.hub_control = isp116x_hub_control,
- .hub_suspend = isp116x_hub_suspend,
- .hub_resume = isp116x_hub_resume,
+ .bus_suspend = isp116x_bus_suspend,
+ .bus_resume = isp116x_bus_resume,
};
/*----------------------------------------------------------------*/
@@ -1732,7 +1722,6 @@
isp116x->addr_reg = addr_reg;
spin_lock_init(&isp116x->lock);
INIT_LIST_HEAD(&isp116x->async);
- INIT_WORK(&isp116x->rh_resume, isp116x_rh_resume, hcd);
isp116x->board = dev->platform_data;
if (!isp116x->board) {
@@ -1774,22 +1763,13 @@
/*
Suspend of platform device
*/
-static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase)
+static int isp116x_suspend(struct device *dev, pm_message_t state)
{
int ret = 0;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- VDBG("%s: state %x, phase %x\n", __func__, state, phase);
+ VDBG("%s: state %x\n", __func__, state);
- if (phase != SUSPEND_DISABLE && phase != SUSPEND_POWER_DOWN)
- return 0;
-
- ret = usb_suspend_device(hcd->self.root_hub, state);
- if (!ret) {
- dev->power.power_state = state;
- INFO("%s suspended\n", hcd_name);
- } else
- ERR("%s suspend failed\n", hcd_name);
+ dev->power.power_state = state;
return ret;
}
@@ -1797,21 +1777,14 @@
/*
Resume platform device
*/
-static int isp116x_resume(struct device *dev, u32 phase)
+static int isp116x_resume(struct device *dev)
{
int ret = 0;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- VDBG("%s: state %x, phase %x\n", __func__, dev->power.power_state,
- phase);
- if (phase != RESUME_POWER_ON)
- return 0;
+ VDBG("%s: state %x\n", __func__, dev->power.power_state);
- ret = usb_resume_device(hcd->self.root_hub);
- if (!ret) {
- dev->power.power_state = PMSG_ON;
- VDBG("%s resumed\n", (char *)hcd_name);
- }
+ dev->power.power_state = PMSG_ON;
+
return ret;
}
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 5887347..c6fec96 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -253,7 +253,6 @@
struct isp116x {
spinlock_t lock;
- struct work_struct rh_resume;
void __iomem *addr_reg;
void __iomem *data_reg;
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 3981bf1..a277e25 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -214,6 +214,11 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
@@ -259,6 +264,7 @@
static struct device_driver ohci_hcd_au1xxx_driver = {
.name = "au1xxx-ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 7924c74..7bfffcb 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -193,10 +193,6 @@
maybe_print_eds (controller, "donehead",
ohci_readl (controller, ®s->donehead), next, size);
-
- /* broken fminterval means traffic won't flow! */
- ohci_dbg (controller, "fminterval %08x\n",
- ohci_readl (controller, ®s->fminterval));
}
#define dbg_port_sw(hc,num,value,next,size) \
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 67c1aa5..5c0c6c8 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -180,7 +180,7 @@
struct usb_hcd *hcd,
struct usb_host_endpoint *ep,
struct urb *urb,
- unsigned mem_flags
+ gfp_t mem_flags
) {
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct ed *ed;
@@ -723,7 +723,7 @@
ohci_vdbg (ohci, "resume detect\n");
ohci_writel (ohci, OHCI_INTR_RD, ®s->intrstatus);
if (hcd->state != HC_STATE_QUIESCING)
- schedule_work(&ohci->rh_resume);
+ usb_hcd_resume_root_hub(hcd);
}
if (ints & OHCI_INTR_WDH) {
@@ -791,7 +791,7 @@
/* must not be called from interrupt context */
-#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
+#ifdef CONFIG_PM
static int ohci_restart (struct ohci_hcd *ohci)
{
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index ce7b28d..e01e77b 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,7 +36,7 @@
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
+#ifdef CONFIG_PM
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
@@ -45,7 +45,7 @@
static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *);
static int ohci_restart (struct ohci_hcd *ohci);
-static int ohci_hub_suspend (struct usb_hcd *hcd)
+static int ohci_bus_suspend (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int status = 0;
@@ -73,7 +73,6 @@
ohci_dbg (ohci, "suspend root hub\n");
/* First stop any processing */
- hcd->state = HC_STATE_QUIESCING;
if (ohci->hc_control & OHCI_SCHED_ENABLES) {
int limit;
@@ -108,7 +107,9 @@
else
ohci->hc_control &= ~OHCI_CTRL_RWE;
- /* Suspend hub */
+ /* Suspend hub ... this is the "global (to this bus) suspend" mode,
+ * which doesn't imply ports will first be individually suspended.
+ */
ohci->hc_control &= ~OHCI_CTRL_HCFS;
ohci->hc_control |= OHCI_USB_SUSPEND;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
@@ -118,8 +119,9 @@
ohci->next_statechange = jiffies + msecs_to_jiffies (5);
done:
+ /* external suspend vs self autosuspend ... same effect */
if (status == 0)
- hcd->state = HC_STATE_SUSPENDED;
+ usb_hcd_suspend_root_hub(hcd);
spin_unlock_irqrestore (&ohci->lock, flags);
return status;
}
@@ -133,7 +135,7 @@
}
/* caller has locked the root hub */
-static int ohci_hub_resume (struct usb_hcd *hcd)
+static int ohci_bus_resume (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
u32 temp, enables;
@@ -146,7 +148,7 @@
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
- /* this can happen after suspend-to-disk */
+ /* this can happen after resuming a swsusp snapshot */
if (hcd->state == HC_STATE_RESUMING) {
ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
ohci->hc_control);
@@ -169,11 +171,12 @@
ohci_info (ohci, "wakeup\n");
break;
case OHCI_USB_OPER:
- ohci_dbg (ohci, "already resumed\n");
- status = 0;
+ /* this can happen after resuming a swsusp snapshot */
+ ohci_dbg (ohci, "snapshot resume? reinit\n");
+ status = -EBUSY;
break;
default: /* RESET, we lost power */
- ohci_dbg (ohci, "root hub hardware reset\n");
+ ohci_dbg (ohci, "lost power\n");
status = -EBUSY;
}
spin_unlock_irq (&ohci->lock);
@@ -198,8 +201,7 @@
}
/* Some controllers (lucent erratum) need extra-long delays */
- hcd->state = HC_STATE_RESUMING;
- mdelay (20 /* usb 11.5.1.10 */ + 15);
+ msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
temp = ohci_readl (ohci, &ohci->regs->control);
temp &= OHCI_CTRL_HCFS;
@@ -273,28 +275,10 @@
(void) ohci_readl (ohci, &ohci->regs->control);
}
- hcd->state = HC_STATE_RUNNING;
return 0;
}
-static void ohci_rh_resume (void *_hcd)
-{
- struct usb_hcd *hcd = _hcd;
-
- usb_lock_device (hcd->self.root_hub);
- (void) ohci_hub_resume (hcd);
- usb_unlock_device (hcd->self.root_hub);
-}
-
-#else
-
-static void ohci_rh_resume (void *_hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (_hcd);
- ohci_dbg(ohci, "rh_resume ??\n");
-}
-
-#endif /* CONFIG_USB_SUSPEND || CONFIG_PM */
+#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
@@ -367,7 +351,6 @@
#ifdef CONFIG_PM
/* save power by suspending idle root hubs;
* INTR_RD wakes us when there's work
- * NOTE: if we can do this, we don't need a root hub timer!
*/
if (can_suspend
&& !changed
@@ -379,8 +362,7 @@
&& usb_trylock_device (hcd->self.root_hub)
) {
ohci_vdbg (ohci, "autosuspend\n");
- (void) ohci_hub_suspend (hcd);
- hcd->state = HC_STATE_RUNNING;
+ (void) ohci_bus_suspend (hcd);
usb_unlock_device (hcd->self.root_hub);
}
#endif
@@ -554,7 +536,7 @@
temp = RH_PS_POCI;
if ((ohci->hc_control & OHCI_CTRL_HCFS)
!= OHCI_USB_OPER)
- schedule_work (&ohci->rh_resume);
+ usb_hcd_resume_root_hub(hcd);
break;
case USB_PORT_FEAT_C_SUSPEND:
temp = RH_PS_PSSC;
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 859aca7b..238fa4a 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -193,6 +193,11 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
@@ -239,6 +244,7 @@
static struct device_driver ohci_hcd_lh7a404_driver = {
.name = "lh7a404-ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_lh7a404_drv_probe,
.remove = ohci_hcd_lh7a404_drv_remove,
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index fd3c4d3..bfbe328 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -28,7 +28,6 @@
ohci->next_statechange = jiffies;
spin_lock_init (&ohci->lock);
INIT_LIST_HEAD (&ohci->pending);
- INIT_WORK (&ohci->rh_resume, ohci_rh_resume, ohci_to_hcd(ohci));
ohci->reboot_notifier.notifier_call = ohci_reboot;
}
@@ -84,7 +83,7 @@
/* TDs ... */
static struct td *
-td_alloc (struct ohci_hcd *hc, unsigned mem_flags)
+td_alloc (struct ohci_hcd *hc, gfp_t mem_flags)
{
dma_addr_t dma;
struct td *td;
@@ -118,7 +117,7 @@
/* EDs ... */
static struct ed *
-ed_alloc (struct ohci_hcd *hc, unsigned mem_flags)
+ed_alloc (struct ohci_hcd *hc, gfp_t mem_flags)
{
dma_addr_t dma;
struct ed *ed;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index d8f3ba7..49815ec 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -14,6 +14,9 @@
* This file is licenced under the GPL.
*/
+#include <linux/signal.h> /* SA_INTERRUPT */
+#include <linux/jiffies.h>
+
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
@@ -420,9 +423,9 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
@@ -455,50 +458,32 @@
#ifdef CONFIG_PM
-static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level)
+static int ohci_omap_suspend(struct device *dev, pm_message_t message)
{
struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
- int status = -EINVAL;
-
- if (level != SUSPEND_POWER_DOWN)
- return 0;
-
- down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
- status = ohci_hub_suspend(ohci_to_hcd(ohci));
- if (status == 0) {
- omap_ohci_clock_power(0);
- ohci_to_hcd(ohci)->self.root_hub->state =
- USB_STATE_SUSPENDED;
- ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
- dev->power.power_state = PMSG_SUSPEND;
- }
- up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
- return status;
-}
-
-static int ohci_omap_resume(struct device *dev, u32 level)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
- int status = 0;
-
- if (level != RESUME_POWER_ON)
- return 0;
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
+
+ omap_ohci_clock_power(0);
+ ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
+ dev->power.power_state = PMSG_SUSPEND;
+ return 0;
+}
+
+static int ohci_omap_resume(struct device *dev)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
omap_ohci_clock_power(1);
-#ifdef CONFIG_USB_SUSPEND
- /* get extra cleanup even if remote wakeup isn't in use */
- status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub);
-#else
- down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
- status = ohci_hub_resume(ohci_to_hcd(ohci));
- up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
-#endif
- if (status == 0)
- dev->power.power_state = PMSG_ON;
- return status;
+ dev->power.power_state = PMSG_ON;
+ usb_hcd_resume_root_hub(dev_get_drvdata(dev));
+ return 0;
}
#endif
@@ -510,6 +495,7 @@
*/
static struct device_driver ohci_hcd_omap_driver = {
.name = "ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_omap_drv_probe,
.remove = ohci_hcd_omap_drv_remove,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index eede6be..7ce1d9e 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -14,6 +14,8 @@
* This file is licenced under the GPL.
*/
+#include <linux/jiffies.h>
+
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
@@ -112,23 +114,13 @@
static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ /* root hub was already suspended */
- /* suspend root hub, hoping it keeps power during suspend */
- if (time_before (jiffies, ohci->next_statechange))
- msleep (100);
-
-#ifdef CONFIG_USB_SUSPEND
- (void) usb_suspend_device (hcd->self.root_hub, message);
-#else
- usb_lock_device (hcd->self.root_hub);
- (void) ohci_hub_suspend (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
- /* let things settle down a bit */
- msleep (100);
-
+ /* FIXME these PMAC things get called in the wrong places. ASIC
+ * clocks should be turned off AFTER entering D3, and on BEFORE
+ * trying to enter D0. Evidently the PCI layer doesn't currently
+ * provide the right sort of platform hooks for this ...
+ */
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
@@ -145,9 +137,6 @@
static int ohci_pci_resume (struct usb_hcd *hcd)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int retval = 0;
-
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
@@ -159,19 +148,8 @@
}
#endif /* CONFIG_PPC_PMAC */
- /* resume root hub */
- if (time_before (jiffies, ohci->next_statechange))
- msleep (100);
-#ifdef CONFIG_USB_SUSPEND
- /* get extra cleanup even if remote wakeup isn't in use */
- retval = usb_resume_device (hcd->self.root_hub);
-#else
- usb_lock_device (hcd->self.root_hub);
- retval = ohci_hub_resume (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
- return retval;
+ usb_hcd_resume_root_hub(hcd);
+ return 0;
}
#endif /* CONFIG_PM */
@@ -218,9 +196,9 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
@@ -240,6 +218,7 @@
static struct pci_driver ohci_pci_driver = {
.name = (char *) hcd_name,
.id_table = pci_ids,
+ .owner = THIS_MODULE,
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 2515333..4832e57 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -163,9 +163,9 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
@@ -193,10 +193,11 @@
static struct device_driver ohci_hcd_ppc_soc_driver = {
.name = "ppc-soc-ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_ppc_soc_drv_probe,
.remove = ohci_hcd_ppc_soc_drv_remove,
-#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
+#ifdef CONFIG_PM
/*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
/*.resume = ohci_hcd_ppc_soc_drv_resume,*/
#endif
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 2fdb262..f4a4aed 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -20,6 +20,7 @@
*/
#include <linux/device.h>
+#include <linux/signal.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
@@ -278,10 +279,11 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
+ .start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
@@ -309,7 +311,7 @@
return 0;
}
-static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u32 level)
+static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state)
{
// struct platform_device *pdev = to_platform_device(dev);
// struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -318,7 +320,7 @@
return 0;
}
-static int ohci_hcd_pxa27x_drv_resume(struct device *dev, u32 level)
+static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
{
// struct platform_device *pdev = to_platform_device(dev);
// struct usb_hcd *hcd = dev_get_drvdata(dev);
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index da7d547..fab420a 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -448,11 +448,11 @@
*/
.hub_status_data = ohci_s3c2410_hub_status_data,
.hub_control = ohci_s3c2410_hub_control,
-
-#if defined(CONFIG_USB_SUSPEND) && 0
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
+ .start_port_reset = ohci_start_port_reset,
};
/* device driver */
@@ -474,6 +474,7 @@
static struct device_driver ohci_hcd_s3c2410_driver = {
.name = "s3c2410-ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = ohci_hcd_s3c2410_drv_remove,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 814d2be..fb3221e 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -235,10 +235,11 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
+ .start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 8a9b9d9..caacf14 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -389,7 +389,6 @@
unsigned long next_statechange; /* suspend/resume */
u32 fminterval; /* saved register */
- struct work_struct rh_resume;
struct notifier_block reboot_notifier;
unsigned long flags; /* for HC bugs */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
new file mode 100644
index 0000000..b7fd3f6
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.c
@@ -0,0 +1,296 @@
+/*
+ * This file contains code to reset and initialize USB host controllers.
+ * Some of it includes work-arounds for PCI hardware and BIOS quirks.
+ * It may need to run early during booting -- before USB would normally
+ * initialize -- to ensure that Linux doesn't use any legacy modes.
+ *
+ * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ * (and others)
+ */
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+#define DEBUG
+#else
+#undef DEBUG
+#endif
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+
+
+#define UHCI_USBLEGSUP 0xc0 /* legacy support */
+#define UHCI_USBCMD 0 /* command register */
+#define UHCI_USBINTR 4 /* interrupt register */
+#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
+#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
+#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
+#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
+#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
+#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
+#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
+
+#define OHCI_CONTROL 0x04
+#define OHCI_CMDSTATUS 0x08
+#define OHCI_INTRSTATUS 0x0c
+#define OHCI_INTRENABLE 0x10
+#define OHCI_INTRDISABLE 0x14
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+
+#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
+#define EHCI_USBCMD 0 /* command register */
+#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
+#define EHCI_USBSTS 4 /* status register */
+#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
+#define EHCI_USBINTR 8 /* interrupt register */
+#define EHCI_USBLEGSUP 0 /* legacy support register */
+#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
+#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
+#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
+#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+
+
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+ /* Turn off PIRQ enable and SMI enable. (This also turns off the
+ * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
+ */
+ pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
+
+ /* Reset the HC - this will force us to get a
+ * new notification of any already connected
+ * ports due to the virtual disconnect that it
+ * implies.
+ */
+ outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
+ mb();
+ udelay(5);
+ if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
+ dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
+
+ /* Just to be safe, disable interrupt requests and
+ * make sure the controller is stopped.
+ */
+ outw(0, base + UHCI_USBINTR);
+ outw(0, base + UHCI_USBCMD);
+}
+EXPORT_SYMBOL_GPL(uhci_reset_hc);
+
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed. In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+ u16 legsup;
+ unsigned int cmd, intr;
+
+ /*
+ * When restarting a suspended controller, we expect all the
+ * settings to be the same as we left them:
+ *
+ * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
+ * Controller is stopped and configured with EGSM set;
+ * No interrupts enabled except possibly Resume Detect.
+ *
+ * If any of these conditions are violated we do a complete reset.
+ */
+ pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
+ if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
+ dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
+ __FUNCTION__, legsup);
+ goto reset_needed;
+ }
+
+ cmd = inw(base + UHCI_USBCMD);
+ if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
+ !(cmd & UHCI_USBCMD_EGSM)) {
+ dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
+ __FUNCTION__, cmd);
+ goto reset_needed;
+ }
+
+ intr = inw(base + UHCI_USBINTR);
+ if (intr & (~UHCI_USBINTR_RESUME)) {
+ dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
+ __FUNCTION__, intr);
+ goto reset_needed;
+ }
+ return 0;
+
+reset_needed:
+ dev_dbg(&pdev->dev, "Performing full reset\n");
+ uhci_reset_hc(pdev, base);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+
+static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
+{
+ unsigned long base = 0;
+ int i;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+ base = pci_resource_start(pdev, i);
+ break;
+ }
+
+ if (base)
+ uhci_check_and_reset_hc(pdev, base);
+}
+
+static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
+{
+ void __iomem *base;
+ int wait_time;
+ u32 control;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL) return;
+
+/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
+#ifndef __hppa__
+ control = readl(base + OHCI_CONTROL);
+ if (control & OHCI_CTRL_IR) {
+ wait_time = 500; /* arbitrary; 5 seconds */
+ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+ writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+ while (wait_time > 0 &&
+ readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ wait_time -= 10;
+ msleep(10);
+ }
+ if (wait_time <= 0)
+ printk(KERN_WARNING "%s %s: early BIOS handoff "
+ "failed (BIOS bug ?)\n",
+ pdev->dev.bus_id, "OHCI");
+
+ /* reset controller, preserving RWC */
+ writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
+ }
+#endif
+
+ /*
+ * disable interrupts
+ */
+ writel(~(u32)0, base + OHCI_INTRDISABLE);
+ writel(~(u32)0, base + OHCI_INTRSTATUS);
+
+ iounmap(base);
+}
+
+static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
+{
+ int wait_time, delta;
+ void __iomem *base, *op_reg_base;
+ u32 hcc_params, val, temp;
+ u8 cap_length;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL) return;
+
+ cap_length = readb(base);
+ op_reg_base = base + cap_length;
+ hcc_params = readl(base + EHCI_HCC_PARAMS);
+ hcc_params = (hcc_params >> 8) & 0xff;
+ if (hcc_params) {
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ &val);
+ if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
+ /*
+ * Ok, BIOS is in smm mode, try to hand off...
+ */
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ &temp);
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ temp | EHCI_USBLEGCTLSTS_SOOE);
+ val |= EHCI_USBLEGSUP_OS;
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ val);
+
+ wait_time = 500;
+ do {
+ msleep(10);
+ wait_time -= 10;
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ &val);
+ } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
+ if (!wait_time) {
+ /*
+ * well, possibly buggy BIOS...
+ */
+ printk(KERN_WARNING "%s %s: early BIOS handoff "
+ "failed (BIOS bug ?)\n",
+ pdev->dev.bus_id, "EHCI");
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ EHCI_USBLEGSUP_OS);
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ 0);
+ }
+ }
+ }
+
+ /*
+ * halt EHCI & disable its interrupts in any case
+ */
+ val = readl(op_reg_base + EHCI_USBSTS);
+ if ((val & EHCI_USBSTS_HALTED) == 0) {
+ val = readl(op_reg_base + EHCI_USBCMD);
+ val &= ~EHCI_USBCMD_RUN;
+ writel(val, op_reg_base + EHCI_USBCMD);
+
+ wait_time = 2000;
+ delta = 100;
+ do {
+ writel(0x3f, op_reg_base + EHCI_USBSTS);
+ udelay(delta);
+ wait_time -= delta;
+ val = readl(op_reg_base + EHCI_USBSTS);
+ if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
+ break;
+ }
+ } while (wait_time > 0);
+ }
+ writel(0, op_reg_base + EHCI_USBINTR);
+ writel(0x3f, op_reg_base + EHCI_USBSTS);
+
+ iounmap(base);
+
+ return;
+}
+
+
+
+static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
+{
+ if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
+ quirk_usb_handoff_uhci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
+ quirk_usb_handoff_ohci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ quirk_usb_disable_ehci(pdev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index d42a15d..40169d9 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -818,7 +818,7 @@
struct usb_hcd *hcd,
struct usb_host_endpoint *hep,
struct urb *urb,
- unsigned mem_flags
+ gfp_t mem_flags
) {
struct sl811 *sl811 = hcd_to_sl811(hcd);
struct usb_device *udev = urb->dev;
@@ -1363,7 +1363,7 @@
#ifdef CONFIG_PM
static int
-sl811h_hub_suspend(struct usb_hcd *hcd)
+sl811h_bus_suspend(struct usb_hcd *hcd)
{
// SOFs off
DBG("%s\n", __FUNCTION__);
@@ -1371,7 +1371,7 @@
}
static int
-sl811h_hub_resume(struct usb_hcd *hcd)
+sl811h_bus_resume(struct usb_hcd *hcd)
{
// SOFs on
DBG("%s\n", __FUNCTION__);
@@ -1380,8 +1380,8 @@
#else
-#define sl811h_hub_suspend NULL
-#define sl811h_hub_resume NULL
+#define sl811h_bus_suspend NULL
+#define sl811h_bus_resume NULL
#endif
@@ -1623,8 +1623,8 @@
*/
.hub_status_data = sl811h_hub_status_data,
.hub_control = sl811h_hub_control,
- .hub_suspend = sl811h_hub_suspend,
- .hub_resume = sl811h_hub_resume,
+ .bus_suspend = sl811h_bus_suspend,
+ .bus_resume = sl811h_bus_resume,
};
/*-------------------------------------------------------------------------*/
@@ -1784,17 +1784,14 @@
*/
static int
-sl811h_suspend(struct device *dev, pm_message_t state, u32 phase)
+sl811h_suspend(struct device *dev, pm_message_t state)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct sl811 *sl811 = hcd_to_sl811(hcd);
int retval = 0;
- if (phase != SUSPEND_POWER_DOWN)
- return retval;
-
if (state.event == PM_EVENT_FREEZE)
- retval = sl811h_hub_suspend(hcd);
+ retval = sl811h_bus_suspend(hcd);
else if (state.event == PM_EVENT_SUSPEND)
port_power(sl811, 0);
if (retval == 0)
@@ -1803,14 +1800,11 @@
}
static int
-sl811h_resume(struct device *dev, u32 phase)
+sl811h_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct sl811 *sl811 = hcd_to_sl811(hcd);
- if (phase != RESUME_POWER_ON)
- return 0;
-
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
@@ -1822,7 +1816,7 @@
}
dev->power.power_state = PMSG_ON;
- return sl811h_hub_resume(hcd);
+ return sl811h_bus_resume(hcd);
}
#else
@@ -1837,6 +1831,7 @@
struct device_driver sl811h_driver = {
.name = (char *) hcd_name,
.bus = &platform_bus_type,
+ .owner = THIS_MODULE,
.probe = sl811h_probe,
.remove = __devexit_p(sl811h_remove),
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 4538a98..151154d 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -348,7 +348,6 @@
if (urbp->urb->status != -EINPROGRESS)
out += sprintf(out, "Status=%d ", urbp->urb->status);
- //out += sprintf(out, "Inserttime=%lx ",urbp->inserttime);
//out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime);
count = 0;
@@ -446,11 +445,11 @@
out += sprintf(out, "Frame List\n");
for (i = 0; i < UHCI_NUMFRAMES; ++i) {
int shown = 0;
- td = uhci->fl->frame_cpu[i];
+ td = uhci->frame_cpu[i];
if (!td)
continue;
- if (td->dma_handle != (dma_addr_t)uhci->fl->frame[i]) {
+ if (td->dma_handle != (dma_addr_t)uhci->frame[i]) {
show_frame_num();
out += sprintf(out, " frame list does not match td->dma_handle!\n");
}
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 0c02489..15e0a51 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -101,37 +101,16 @@
#include "uhci-q.c"
#include "uhci-hub.c"
+extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
/*
- * Make sure the controller is completely inactive, unable to
- * generate interrupts or do DMA.
+ * Finish up a host controller reset and update the recorded state.
*/
-static void reset_hc(struct uhci_hcd *uhci)
+static void finish_reset(struct uhci_hcd *uhci)
{
int port;
- /* Turn off PIRQ enable and SMI enable. (This also turns off the
- * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
- */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_RWC);
-
- /* Reset the HC - this will force us to get a
- * new notification of any already connected
- * ports due to the virtual disconnect that it
- * implies.
- */
- outw(USBCMD_HCRESET, uhci->io_addr + USBCMD);
- mb();
- udelay(5);
- if (inw(uhci->io_addr + USBCMD) & USBCMD_HCRESET)
- dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
-
- /* Just to be safe, disable interrupt requests and
- * make sure the controller is stopped.
- */
- outw(0, uhci->io_addr + USBINTR);
- outw(0, uhci->io_addr + USBCMD);
-
/* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
* bits in the port status and control registers.
* We have to clear them by hand.
@@ -153,7 +132,8 @@
*/
static void hc_died(struct uhci_hcd *uhci)
{
- reset_hc(uhci);
+ uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
+ finish_reset(uhci);
uhci->hc_inaccessible = 1;
}
@@ -163,44 +143,8 @@
*/
static void check_and_reset_hc(struct uhci_hcd *uhci)
{
- u16 legsup;
- unsigned int cmd, intr;
-
- /*
- * When restarting a suspended controller, we expect all the
- * settings to be the same as we left them:
- *
- * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
- * Controller is stopped and configured with EGSM set;
- * No interrupts enabled except possibly Resume Detect.
- *
- * If any of these conditions are violated we do a complete reset.
- */
- pci_read_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, &legsup);
- if (legsup & ~(USBLEGSUP_RO | USBLEGSUP_RWC)) {
- dev_dbg(uhci_dev(uhci), "%s: legsup = 0x%04x\n",
- __FUNCTION__, legsup);
- goto reset_needed;
- }
-
- cmd = inw(uhci->io_addr + USBCMD);
- if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
- dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
- __FUNCTION__, cmd);
- goto reset_needed;
- }
-
- intr = inw(uhci->io_addr + USBINTR);
- if (intr & (~USBINTR_RESUME)) {
- dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
- __FUNCTION__, intr);
- goto reset_needed;
- }
- return;
-
-reset_needed:
- dev_dbg(uhci_dev(uhci), "Performing full reset\n");
- reset_hc(uhci);
+ if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
+ finish_reset(uhci);
}
/*
@@ -212,13 +156,13 @@
outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
/* Store the frame list base address */
- outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD);
+ outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD);
/* Set the current frame number */
outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
- /* Mark controller as running before we enable interrupts */
- uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
+ /* Mark controller as not halted before we enable interrupts */
+ uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
mb();
/* Enable PIRQ */
@@ -319,6 +263,7 @@
static void start_rh(struct uhci_hcd *uhci)
{
+ uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
uhci->is_stopped = 0;
smp_wmb();
@@ -437,36 +382,21 @@
int i;
for (i = 0; i < UHCI_NUM_SKELQH; i++)
- if (uhci->skelqh[i]) {
- uhci_free_qh(uhci, uhci->skelqh[i]);
- uhci->skelqh[i] = NULL;
- }
+ uhci_free_qh(uhci, uhci->skelqh[i]);
- if (uhci->term_td) {
- uhci_free_td(uhci, uhci->term_td);
- uhci->term_td = NULL;
- }
+ uhci_free_td(uhci, uhci->term_td);
- if (uhci->qh_pool) {
- dma_pool_destroy(uhci->qh_pool);
- uhci->qh_pool = NULL;
- }
+ dma_pool_destroy(uhci->qh_pool);
- if (uhci->td_pool) {
- dma_pool_destroy(uhci->td_pool);
- uhci->td_pool = NULL;
- }
+ dma_pool_destroy(uhci->td_pool);
- if (uhci->fl) {
- dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- uhci->fl, uhci->fl->dma_handle);
- uhci->fl = NULL;
- }
+ kfree(uhci->frame_cpu);
- if (uhci->dentry) {
- debugfs_remove(uhci->dentry);
- uhci->dentry = NULL;
- }
+ dma_free_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ uhci->frame, uhci->frame_dma_handle);
+
+ debugfs_remove(uhci->dentry);
}
static int uhci_reset(struct usb_hcd *hcd)
@@ -545,7 +475,6 @@
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int retval = -EBUSY;
int i;
- dma_addr_t dma_handle;
struct dentry *dentry;
hcd->uses_new_polling = 1;
@@ -579,17 +508,23 @@
init_waitqueue_head(&uhci->waitqh);
- uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- &dma_handle, 0);
- if (!uhci->fl) {
+ uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ &uhci->frame_dma_handle, 0);
+ if (!uhci->frame) {
dev_err(uhci_dev(uhci), "unable to allocate "
"consistent memory for frame list\n");
- goto err_alloc_fl;
+ goto err_alloc_frame;
}
+ memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame));
- memset((void *)uhci->fl, 0, sizeof(*uhci->fl));
-
- uhci->fl->dma_handle = dma_handle;
+ uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
+ GFP_KERNEL);
+ if (!uhci->frame_cpu) {
+ dev_err(uhci_dev(uhci), "unable to allocate "
+ "memory for frame pointers\n");
+ goto err_alloc_frame_cpu;
+ }
uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
sizeof(struct uhci_td), 16, 0);
@@ -672,7 +607,7 @@
irq = 7;
/* Only place we don't use the frame list routines */
- uhci->fl->frame[i] = UHCI_PTR_QH |
+ uhci->frame[i] = UHCI_PTR_QH |
cpu_to_le32(uhci->skelqh[irq]->dma_handle);
}
@@ -690,31 +625,29 @@
* error exits:
*/
err_alloc_skelqh:
- for (i = 0; i < UHCI_NUM_SKELQH; i++)
- if (uhci->skelqh[i]) {
+ for (i = 0; i < UHCI_NUM_SKELQH; i++) {
+ if (uhci->skelqh[i])
uhci_free_qh(uhci, uhci->skelqh[i]);
- uhci->skelqh[i] = NULL;
- }
+ }
uhci_free_td(uhci, uhci->term_td);
- uhci->term_td = NULL;
err_alloc_term_td:
dma_pool_destroy(uhci->qh_pool);
- uhci->qh_pool = NULL;
err_create_qh_pool:
dma_pool_destroy(uhci->td_pool);
- uhci->td_pool = NULL;
err_create_td_pool:
- dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- uhci->fl, uhci->fl->dma_handle);
- uhci->fl = NULL;
+ kfree(uhci->frame_cpu);
-err_alloc_fl:
+err_alloc_frame_cpu:
+ dma_free_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ uhci->frame, uhci->frame_dma_handle);
+
+err_alloc_frame:
debugfs_remove(uhci->dentry);
- uhci->dentry = NULL;
err_create_debug_entry:
return retval;
@@ -726,7 +659,7 @@
spin_lock_irq(&uhci->lock);
if (!uhci->hc_inaccessible)
- reset_hc(uhci);
+ hc_died(uhci);
uhci_scan_schedule(uhci, NULL);
spin_unlock_irq(&uhci->lock);
@@ -774,14 +707,8 @@
if (uhci->hc_inaccessible) /* Dead or already suspended */
goto done;
-#ifndef CONFIG_USB_SUSPEND
- /* Otherwise this would never happen */
- suspend_rh(uhci, UHCI_RH_SUSPENDED);
-#endif
-
if (uhci->rh_state > UHCI_RH_SUSPENDED) {
dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
- hcd->state = HC_STATE_RUNNING;
rc = -EBUSY;
goto done;
};
@@ -820,10 +747,6 @@
check_and_reset_hc(uhci);
configure_hc(uhci);
-#ifndef CONFIG_USB_SUSPEND
- /* Otherwise this would never happen */
- wakeup_rh(uhci);
-#endif
if (uhci->rh_state == UHCI_RH_RESET)
suspend_rh(uhci, UHCI_RH_SUSPENDED);
@@ -881,8 +804,8 @@
#ifdef CONFIG_PM
.suspend = uhci_suspend,
.resume = uhci_resume,
- .hub_suspend = uhci_rh_suspend,
- .hub_resume = uhci_rh_resume,
+ .bus_suspend = uhci_rh_suspend,
+ .bus_resume = uhci_rh_resume,
#endif
.stop = uhci_stop,
@@ -908,6 +831,7 @@
static struct pci_driver uhci_pci_driver = {
.name = (char *)hcd_name,
.id_table = uhci_pci_ids,
+ .owner = THIS_MODULE,
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 282f40b..e576db5 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -7,6 +7,7 @@
#define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
#define PIPE_DEVEP_MASK 0x0007ff00
+
/*
* Universal Host Controller Interface data structures and defines
*/
@@ -82,15 +83,10 @@
#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
#define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */
-struct uhci_frame_list {
- __le32 frame[UHCI_NUMFRAMES];
- void *frame_cpu[UHCI_NUMFRAMES];
-
- dma_addr_t dma_handle;
-};
-
-struct urb_priv;
+/*
+ * Queue Headers
+ */
/*
* One role of a QH is to hold a queue of TDs for some endpoint. Each QH is
@@ -116,13 +112,13 @@
struct urb_priv *urbp;
- struct list_head list; /* P: uhci->frame_list_lock */
- struct list_head remove_list; /* P: uhci->remove_list_lock */
+ struct list_head list;
+ struct list_head remove_list;
} __attribute__((aligned(16)));
/*
* We need a special accessor for the element pointer because it is
- * subject to asynchronous updates by the controller
+ * subject to asynchronous updates by the controller.
*/
static __le32 inline qh_element(struct uhci_qh *qh) {
__le32 element = qh->element;
@@ -131,6 +127,11 @@
return element;
}
+
+/*
+ * Transfer Descriptors
+ */
+
/*
* for TD <status>:
*/
@@ -183,17 +184,10 @@
*
* That's silly, the hardware doesn't care. The hardware only cares that
* the hardware words are 16-byte aligned, and we can have any amount of
- * sw space after the TD entry as far as I can tell.
- *
- * But let's just go with the documentation, at least for 32-bit machines.
- * On 64-bit machines we probably want to take advantage of the fact that
- * hw doesn't really care about the size of the sw-only area.
- *
- * Alas, not anymore, we have more than 4 words for software, woops.
- * Everything still works tho, surprise! -jerdfelt
+ * sw space after the TD entry.
*
* td->link points to either another TD (not necessarily for the same urb or
- * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs)
+ * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs).
*/
struct uhci_td {
/* Hardware fields */
@@ -205,18 +199,16 @@
/* Software fields */
dma_addr_t dma_handle;
- struct urb *urb;
-
- struct list_head list; /* P: urb->lock */
- struct list_head remove_list; /* P: uhci->td_remove_list_lock */
+ struct list_head list;
+ struct list_head remove_list;
int frame; /* for iso: what frame? */
- struct list_head fl_list; /* P: uhci->frame_list_lock */
+ struct list_head fl_list;
} __attribute__((aligned(16)));
/*
* We need a special accessor for the control/status word because it is
- * subject to asynchronous updates by the controller
+ * subject to asynchronous updates by the controller.
*/
static u32 inline td_status(struct uhci_td *td) {
__le32 status = td->status;
@@ -227,6 +219,10 @@
/*
+ * Skeleton Queue Headers
+ */
+
+/*
* The UHCI driver places Interrupt, Control and Bulk into QH's both
* to group together TD's for one transfer, and also to faciliate queuing
* of URB's. To make it easy to insert entries into the schedule, we have
@@ -256,15 +252,15 @@
*
* The terminating QH is used for 2 reasons:
* - To place a terminating TD which is used to workaround a PIIX bug
- * (see Intel errata for explanation)
+ * (see Intel errata for explanation), and
* - To loop back to the full-speed control queue for full-speed bandwidth
- * reclamation
+ * reclamation.
*
* Isochronous transfers are stored before the start of the skeleton
* schedule and don't use QH's. While the UHCI spec doesn't forbid the
- * use of QH's for Isochronous, it doesn't use them either. Since we don't
- * need to use them either, we follow the spec diagrams in hope that it'll
- * be more compatible with future UHCI implementations.
+ * use of QH's for Isochronous, it doesn't use them either. And the spec
+ * says that queues never advance on an error completion status, which
+ * makes them totally unsuitable for Isochronous transfers.
*/
#define UHCI_NUM_SKELQH 12
@@ -314,8 +310,13 @@
return 0; /* int128 for 128-255 ms (Max.) */
}
+
/*
- * States for the root hub.
+ * The UHCI controller and root hub
+ */
+
+/*
+ * States for the root hub:
*
* To prevent "bouncing" in the presence of electrical noise,
* when there are no devices attached we delay for 1 second in the
@@ -326,7 +327,7 @@
*/
enum uhci_rh_state {
/* In the following states the HC must be halted.
- * These two must come first */
+ * These two must come first. */
UHCI_RH_RESET,
UHCI_RH_SUSPENDED,
@@ -338,13 +339,13 @@
UHCI_RH_SUSPENDING,
/* In the following states it's an error if the HC is halted.
- * These two must come last */
+ * These two must come last. */
UHCI_RH_RUNNING, /* The normal state */
UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */
};
/*
- * This describes the full uhci information.
+ * The full UHCI controller information:
*/
struct uhci_hcd {
@@ -361,7 +362,11 @@
struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */
spinlock_t lock;
- struct uhci_frame_list *fl; /* P: uhci->lock */
+
+ dma_addr_t frame_dma_handle; /* Hardware frame list */
+ __le32 *frame;
+ void **frame_cpu; /* CPU's frame list */
+
int fsbr; /* Full-speed bandwidth reclamation */
unsigned long fsbrtimeout; /* FSBR delay */
@@ -385,22 +390,22 @@
unsigned long ports_timeout; /* Time to stop signalling */
/* Main list of URB's currently controlled by this HC */
- struct list_head urb_list; /* P: uhci->lock */
+ struct list_head urb_list;
/* List of QH's that are done, but waiting to be unlinked (race) */
- struct list_head qh_remove_list; /* P: uhci->lock */
+ struct list_head qh_remove_list;
unsigned int qh_remove_age; /* Age in frames */
/* List of TD's that are done, but waiting to be freed (race) */
- struct list_head td_remove_list; /* P: uhci->lock */
+ struct list_head td_remove_list;
unsigned int td_remove_age; /* Age in frames */
/* List of asynchronously unlinked URB's */
- struct list_head urb_remove_list; /* P: uhci->lock */
+ struct list_head urb_remove_list;
unsigned int urb_remove_age; /* Age in frames */
/* List of URB's awaiting completion callback */
- struct list_head complete_list; /* P: uhci->lock */
+ struct list_head complete_list;
int rh_numports; /* Number of root-hub ports */
@@ -419,13 +424,17 @@
#define uhci_dev(u) (uhci_to_hcd(u)->self.controller)
+
+/*
+ * Private per-URB data
+ */
struct urb_priv {
struct list_head urb_list;
struct urb *urb;
struct uhci_qh *qh; /* QH for this URB */
- struct list_head td_list; /* P: urb->lock */
+ struct list_head td_list;
unsigned fsbr : 1; /* URB turned on FSBR */
unsigned fsbr_timeout : 1; /* URB timed out on FSBR */
@@ -434,12 +443,12 @@
/* a control transfer, retrigger */
/* the status phase */
- unsigned long inserttime; /* In jiffies */
unsigned long fsbrtime; /* In jiffies */
- struct list_head queue_list; /* P: uhci->frame_list_lock */
+ struct list_head queue_list;
};
+
/*
* Locking in uhci.c
*
@@ -459,6 +468,5 @@
#define PCI_VENDOR_ID_GENESYS 0x17a0
#define PCI_DEVICE_ID_GL880S_UHCI 0x8083
-#define PCI_DEVICE_ID_GL880S_EHCI 0x8084
#endif
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index ea0d168..7e46887 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -89,10 +89,10 @@
td->frame = framenum;
/* Is there a TD already mapped there? */
- if (uhci->fl->frame_cpu[framenum]) {
+ if (uhci->frame_cpu[framenum]) {
struct uhci_td *ftd, *ltd;
- ftd = uhci->fl->frame_cpu[framenum];
+ ftd = uhci->frame_cpu[framenum];
ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list);
list_add_tail(&td->fl_list, &ftd->fl_list);
@@ -101,29 +101,32 @@
wmb();
ltd->link = cpu_to_le32(td->dma_handle);
} else {
- td->link = uhci->fl->frame[framenum];
+ td->link = uhci->frame[framenum];
wmb();
- uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle);
- uhci->fl->frame_cpu[framenum] = td;
+ uhci->frame[framenum] = cpu_to_le32(td->dma_handle);
+ uhci->frame_cpu[framenum] = td;
}
}
-static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td)
+static inline void uhci_remove_td_frame_list(struct uhci_hcd *uhci,
+ struct uhci_td *td)
{
/* If it's not inserted, don't remove it */
- if (td->frame == -1 && list_empty(&td->fl_list))
+ if (td->frame == -1) {
+ WARN_ON(!list_empty(&td->fl_list));
return;
+ }
- if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) {
+ if (uhci->frame_cpu[td->frame] == td) {
if (list_empty(&td->fl_list)) {
- uhci->fl->frame[td->frame] = td->link;
- uhci->fl->frame_cpu[td->frame] = NULL;
+ uhci->frame[td->frame] = td->link;
+ uhci->frame_cpu[td->frame] = NULL;
} else {
struct uhci_td *ntd;
ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
- uhci->fl->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
- uhci->fl->frame_cpu[td->frame] = ntd;
+ uhci->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
+ uhci->frame_cpu[td->frame] = ntd;
}
} else {
struct uhci_td *ptd;
@@ -132,13 +135,20 @@
ptd->link = td->link;
}
- wmb();
- td->link = UHCI_PTR_TERM;
-
list_del_init(&td->fl_list);
td->frame = -1;
}
+static void unlink_isochronous_tds(struct uhci_hcd *uhci, struct urb *urb)
+{
+ struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
+ struct uhci_td *td;
+
+ list_for_each_entry(td, &urbp->td_list, list)
+ uhci_remove_td_frame_list(uhci, td);
+ wmb();
+}
+
/*
* Inserts a td list into qh.
*/
@@ -443,7 +453,6 @@
memset((void *)urbp, 0, sizeof(*urbp));
- urbp->inserttime = jiffies;
urbp->fsbrtime = jiffies;
urbp->urb = urb;
@@ -462,8 +471,6 @@
{
struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- td->urb = urb;
-
list_add_tail(&td->list, &urbp->td_list);
}
@@ -473,8 +480,6 @@
return;
list_del_init(&td->list);
-
- td->urb = NULL;
}
static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
@@ -503,7 +508,6 @@
list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
uhci_remove_td_from_urb(td);
- uhci_remove_td(uhci, td);
list_add(&td->remove_list, &uhci->td_remove_list);
}
@@ -1073,6 +1077,7 @@
struct uhci_td *td;
int i, ret, frame;
int status, destination;
+ struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
@@ -1081,11 +1086,7 @@
if (ret)
return ret;
- frame = urb->start_frame;
- for (i = 0; i < urb->number_of_packets; i++, frame += urb->interval) {
- if (!urb->iso_frame_desc[i].length)
- continue;
-
+ for (i = 0; i < urb->number_of_packets; i++) {
td = uhci_alloc_td(uhci);
if (!td)
return -ENOMEM;
@@ -1096,8 +1097,12 @@
if (i + 1 >= urb->number_of_packets)
td->status |= cpu_to_le32(TD_CTRL_IOC);
+ }
+ frame = urb->start_frame;
+ list_for_each_entry(td, &urbp->td_list, list) {
uhci_insert_td_frame_list(uhci, td, frame);
+ frame += urb->interval;
}
return -EINPROGRESS;
@@ -1110,7 +1115,7 @@
int status;
int i, ret = 0;
- urb->actual_length = 0;
+ urb->actual_length = urb->error_count = 0;
i = 0;
list_for_each_entry(td, &urbp->td_list, list) {
@@ -1134,6 +1139,7 @@
i++;
}
+ unlink_isochronous_tds(uhci, urb);
return ret;
}
@@ -1164,7 +1170,7 @@
static int uhci_urb_enqueue(struct usb_hcd *hcd,
struct usb_host_endpoint *ep,
- struct urb *urb, unsigned mem_flags)
+ struct urb *urb, gfp_t mem_flags)
{
int ret;
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
@@ -1366,6 +1372,8 @@
goto done;
list_del_init(&urbp->urb_list);
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+ unlink_isochronous_tds(uhci, urb);
uhci_unlink_generic(uhci, urb);
uhci_get_current_frame_number(uhci);
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index a330a4b..1d973bc 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -425,9 +425,8 @@
static struct usb_driver mdc800_usb_driver;
static struct file_operations mdc800_device_ops;
static struct usb_class_driver mdc800_class = {
- .name = "usb/mdc800%d",
+ .name = "mdc800%d",
.fops = &mdc800_device_ops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = MDC800_DEVICE_MINOR_BASE,
};
@@ -976,13 +975,13 @@
Init and Cleanup this driver (Main Functions)
*************************************************************************/
-#define try(A) if (!(A)) goto cleanup_on_fail;
-
static int __init usb_mdc800_init (void)
{
int retval = -ENODEV;
/* Allocate Memory */
- try (mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL));
+ mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL);
+ if (!mdc800)
+ goto cleanup_on_fail;
memset(mdc800, 0, sizeof(struct mdc800_data));
mdc800->dev = NULL;
@@ -998,13 +997,25 @@
mdc800->downloaded = 0;
mdc800->written = 0;
- try (mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL));
- try (mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL));
- try (mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL));
+ mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL);
+ if (!mdc800->irq_urb_buffer)
+ goto cleanup_on_fail;
+ mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL);
+ if (!mdc800->write_urb_buffer)
+ goto cleanup_on_fail;
+ mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL);
+ if (!mdc800->download_urb_buffer)
+ goto cleanup_on_fail;
- try (mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL));
- try (mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL));
- try (mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL));
+ mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL);
+ if (!mdc800->irq_urb)
+ goto cleanup_on_fail;
+ mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL);
+ if (!mdc800->download_urb)
+ goto cleanup_on_fail;
+ mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL);
+ if (!mdc800->write_urb)
+ goto cleanup_on_fail;
/* Register the driver */
retval = usb_register(&mdc800_usb_driver);
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index c84e148..c89d076 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -773,11 +773,10 @@
}
- new_desc = kmalloc(sizeof(struct mts_desc), GFP_KERNEL);
+ new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL);
if (!new_desc)
goto out;
- memset(new_desc, 0, sizeof(*new_desc));
new_desc->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!new_desc->urb)
goto out_kfree;
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
index 74f8760..a32558b 100644
--- a/drivers/usb/input/acecad.c
+++ b/drivers/usb/input/acecad.c
@@ -53,7 +53,7 @@
char name[128];
char phys[64];
struct usb_device *usbdev;
- struct input_dev dev;
+ struct input_dev *input;
struct urb *irq;
signed char *data;
@@ -64,7 +64,7 @@
{
struct usb_acecad *acecad = urb->context;
unsigned char *data = acecad->data;
- struct input_dev *dev = &acecad->dev;
+ struct input_dev *dev = acecad->input;
int prox, status;
switch (urb->status) {
@@ -135,8 +135,8 @@
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct usb_acecad *acecad;
+ struct input_dev *input_dev;
int pipe, maxp;
- char path[64];
if (interface->desc.bNumEndpoints != 1)
return -ENODEV;
@@ -153,8 +153,9 @@
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
- if (!acecad)
- return -ENOMEM;
+ input_dev = input_allocate_device();
+ if (!acecad || !input_dev)
+ goto fail1;
acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma);
if (!acecad->data)
@@ -164,6 +165,9 @@
if (!acecad->irq)
goto fail2;
+ acecad->usbdev = dev;
+ acecad->input = input_dev;
+
if (dev->manufacturer)
strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
@@ -173,48 +177,48 @@
strlcat(acecad->name, dev->product, sizeof(acecad->name));
}
- usb_make_path(dev, path, sizeof(path));
- snprintf(acecad->phys, sizeof(acecad->phys), "%s/input0", path);
+ usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
+ strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
- acecad->usbdev = dev;
+ input_dev->name = acecad->name;
+ input_dev->phys = acecad->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = acecad;
- acecad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- acecad->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- acecad->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
- acecad->dev.keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
+ input_dev->open = usb_acecad_open;
+ input_dev->close = usb_acecad_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+ input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
switch (id->driver_info) {
case 0:
- acecad->dev.absmax[ABS_X] = 5000;
- acecad->dev.absmax[ABS_Y] = 3750;
- acecad->dev.absmax[ABS_PRESSURE] = 512;
+ input_dev->absmax[ABS_X] = 5000;
+ input_dev->absmax[ABS_Y] = 3750;
+ input_dev->absmax[ABS_PRESSURE] = 512;
if (!strlen(acecad->name))
snprintf(acecad->name, sizeof(acecad->name),
"USB Acecad Flair Tablet %04x:%04x",
- dev->descriptor.idVendor, dev->descriptor.idProduct);
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
break;
case 1:
- acecad->dev.absmax[ABS_X] = 3000;
- acecad->dev.absmax[ABS_Y] = 2250;
- acecad->dev.absmax[ABS_PRESSURE] = 1024;
+ input_dev->absmax[ABS_X] = 3000;
+ input_dev->absmax[ABS_Y] = 2250;
+ input_dev->absmax[ABS_PRESSURE] = 1024;
if (!strlen(acecad->name))
snprintf(acecad->name, sizeof(acecad->name),
"USB Acecad 302 Tablet %04x:%04x",
- dev->descriptor.idVendor, dev->descriptor.idProduct);
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
break;
}
- acecad->dev.absfuzz[ABS_X] = 4;
- acecad->dev.absfuzz[ABS_Y] = 4;
-
- acecad->dev.private = acecad;
- acecad->dev.open = usb_acecad_open;
- acecad->dev.close = usb_acecad_close;
-
- acecad->dev.name = acecad->name;
- acecad->dev.phys = acecad->phys;
- usb_to_input_id(dev, &acecad->dev.id);
- acecad->dev.dev = &intf->dev;
+ input_dev->absfuzz[ABS_X] = 4;
+ input_dev->absfuzz[ABS_Y] = 4;
usb_fill_int_urb(acecad->irq, dev, pipe,
acecad->data, maxp > 8 ? 8 : maxp,
@@ -222,17 +226,15 @@
acecad->irq->transfer_dma = acecad->data_dma;
acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(&acecad->dev);
-
- printk(KERN_INFO "input: %s with packet size %d on %s\n",
- acecad->name, maxp, path);
+ input_register_device(acecad->input);
usb_set_intfdata(intf, acecad);
return 0;
fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
- fail1: kfree(acecad);
+ fail1: input_free_device(input_dev);
+ kfree(acecad);
return -ENOMEM;
}
@@ -243,7 +245,7 @@
usb_set_intfdata(intf, NULL);
if (acecad) {
usb_kill_urb(acecad->irq);
- input_unregister_device(&acecad->dev);
+ input_unregister_device(acecad->input);
usb_free_urb(acecad->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
kfree(acecad);
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index cd0cbfe..1c3b472 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -317,7 +317,7 @@
};
struct aiptek {
- struct input_dev inputdev; /* input device struct */
+ struct input_dev *inputdev; /* input device struct */
struct usb_device *usbdev; /* usb device struct */
struct urb *urb; /* urb for incoming reports */
dma_addr_t data_dma; /* our dma stuffage */
@@ -402,7 +402,7 @@
{
struct aiptek *aiptek = urb->context;
unsigned char *data = aiptek->data;
- struct input_dev *inputdev = &aiptek->inputdev;
+ struct input_dev *inputdev = aiptek->inputdev;
int jitterable = 0;
int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
@@ -955,20 +955,20 @@
/* Query getXextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_X] = 0;
- aiptek->inputdev.absmax[ABS_X] = ret - 1;
+ aiptek->inputdev->absmin[ABS_X] = 0;
+ aiptek->inputdev->absmax[ABS_X] = ret - 1;
/* Query getYextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_Y] = 0;
- aiptek->inputdev.absmax[ABS_Y] = ret - 1;
+ aiptek->inputdev->absmin[ABS_Y] = 0;
+ aiptek->inputdev->absmax[ABS_Y] = ret - 1;
/* Query getPressureLevels */
if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_PRESSURE] = 0;
- aiptek->inputdev.absmax[ABS_PRESSURE] = ret - 1;
+ aiptek->inputdev->absmin[ABS_PRESSURE] = 0;
+ aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1;
/* Depending on whether we are in absolute or relative mode, we will
* do a switchToTablet(absolute) or switchToMouse(relative) command.
@@ -1025,8 +1025,8 @@
return 0;
return snprintf(buf, PAGE_SIZE, "%dx%d\n",
- aiptek->inputdev.absmax[ABS_X] + 1,
- aiptek->inputdev.absmax[ABS_Y] + 1);
+ aiptek->inputdev->absmax[ABS_X] + 1,
+ aiptek->inputdev->absmax[ABS_Y] + 1);
}
/* These structs define the sysfs files, param #1 is the name of the
@@ -1048,7 +1048,7 @@
return 0;
return snprintf(buf, PAGE_SIZE, "0x%04x\n",
- aiptek->inputdev.id.product);
+ aiptek->inputdev->id.product);
}
static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL);
@@ -1063,7 +1063,7 @@
if (aiptek == NULL)
return 0;
- return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev.id.vendor);
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor);
}
static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL);
@@ -1977,7 +1977,6 @@
struct input_dev *inputdev;
struct input_handle *inputhandle;
struct list_head *node, *next;
- char path[64 + 1];
int i;
int speeds[] = { 0,
AIPTEK_PROGRAMMABLE_DELAY_50,
@@ -1996,24 +1995,26 @@
*/
speeds[0] = programmableDelay;
- if ((aiptek = kmalloc(sizeof(struct aiptek), GFP_KERNEL)) == NULL)
- return -ENOMEM;
- memset(aiptek, 0, sizeof(struct aiptek));
+ aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
+ inputdev = input_allocate_device();
+ if (!aiptek || !inputdev)
+ goto fail1;
aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
SLAB_ATOMIC, &aiptek->data_dma);
- if (aiptek->data == NULL) {
- kfree(aiptek);
- return -ENOMEM;
- }
+ if (!aiptek->data)
+ goto fail1;
aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (aiptek->urb == NULL) {
- usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
- aiptek->data_dma);
- kfree(aiptek);
- return -ENOMEM;
- }
+ if (!aiptek->urb)
+ goto fail2;
+
+ aiptek->inputdev = inputdev;
+ aiptek->usbdev = usbdev;
+ aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+ aiptek->inDelay = 0;
+ aiptek->endDelay = 0;
+ aiptek->previousJitterable = 0;
/* Set up the curSettings struct. Said struct contains the current
* programmable parameters. The newSetting struct contains changes
@@ -2036,31 +2037,48 @@
/* Both structs should have equivalent settings
*/
- memcpy(&aiptek->newSetting, &aiptek->curSetting,
- sizeof(struct aiptek_settings));
+ aiptek->newSetting = aiptek->curSetting;
+
+ /* Determine the usb devices' physical path.
+ * Asketh not why we always pretend we're using "../input0",
+ * but I suspect this will have to be refactored one
+ * day if a single USB device can be a keyboard & a mouse
+ * & a tablet, and the inputX number actually will tell
+ * us something...
+ */
+ usb_make_path(usbdev, aiptek->features.usbPath,
+ sizeof(aiptek->features.usbPath));
+ strlcat(aiptek->features.usbPath, "/input0",
+ sizeof(aiptek->features.usbPath));
+
+ /* Set up client data, pointers to open and close routines
+ * for the input device.
+ */
+ inputdev->name = "Aiptek";
+ inputdev->phys = aiptek->features.usbPath;
+ usb_to_input_id(usbdev, &inputdev->id);
+ inputdev->cdev.dev = &intf->dev;
+ inputdev->private = aiptek;
+ inputdev->open = aiptek_open;
+ inputdev->close = aiptek_close;
/* Now program the capacities of the tablet, in terms of being
* an input device.
*/
- aiptek->inputdev.evbit[0] |= BIT(EV_KEY)
+ inputdev->evbit[0] |= BIT(EV_KEY)
| BIT(EV_ABS)
| BIT(EV_REL)
| BIT(EV_MSC);
- aiptek->inputdev.absbit[0] |=
- (BIT(ABS_X) |
- BIT(ABS_Y) |
- BIT(ABS_PRESSURE) |
- BIT(ABS_TILT_X) |
- BIT(ABS_TILT_Y) | BIT(ABS_WHEEL) | BIT(ABS_MISC));
+ inputdev->absbit[0] |= BIT(ABS_MISC);
- aiptek->inputdev.relbit[0] |=
+ inputdev->relbit[0] |=
(BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC));
- aiptek->inputdev.keybit[LONG(BTN_LEFT)] |=
+ inputdev->keybit[LONG(BTN_LEFT)] |=
(BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE));
- aiptek->inputdev.keybit[LONG(BTN_DIGI)] |=
+ inputdev->keybit[LONG(BTN_DIGI)] |=
(BIT(BTN_TOOL_PEN) |
BIT(BTN_TOOL_RUBBER) |
BIT(BTN_TOOL_PENCIL) |
@@ -2070,70 +2088,26 @@
BIT(BTN_TOOL_LENS) |
BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2));
- aiptek->inputdev.mscbit[0] = BIT(MSC_SERIAL);
+ inputdev->mscbit[0] = BIT(MSC_SERIAL);
/* Programming the tablet macro keys needs to be done with a for loop
* as the keycodes are discontiguous.
*/
for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i)
- set_bit(macroKeyEvents[i], aiptek->inputdev.keybit);
+ set_bit(macroKeyEvents[i], inputdev->keybit);
- /* Set up client data, pointers to open and close routines
- * for the input device.
- */
- aiptek->inputdev.private = aiptek;
- aiptek->inputdev.open = aiptek_open;
- aiptek->inputdev.close = aiptek_close;
-
- /* Determine the usb devices' physical path.
- * Asketh not why we always pretend we're using "../input0",
- * but I suspect this will have to be refactored one
- * day if a single USB device can be a keyboard & a mouse
- * & a tablet, and the inputX number actually will tell
- * us something...
- */
- if (usb_make_path(usbdev, path, 64) > 0)
- sprintf(aiptek->features.usbPath, "%s/input0", path);
-
- /* Program the input device coordinate capacities. We do not yet
+ /*
+ * Program the input device coordinate capacities. We do not yet
* know what maximum X, Y, and Z values are, so we're putting fake
* values in. Later, we'll ask the tablet to put in the correct
* values.
*/
- aiptek->inputdev.absmin[ABS_X] = 0;
- aiptek->inputdev.absmax[ABS_X] = 2999;
- aiptek->inputdev.absmin[ABS_Y] = 0;
- aiptek->inputdev.absmax[ABS_Y] = 2249;
- aiptek->inputdev.absmin[ABS_PRESSURE] = 0;
- aiptek->inputdev.absmax[ABS_PRESSURE] = 511;
- aiptek->inputdev.absmin[ABS_TILT_X] = AIPTEK_TILT_MIN;
- aiptek->inputdev.absmax[ABS_TILT_X] = AIPTEK_TILT_MAX;
- aiptek->inputdev.absmin[ABS_TILT_Y] = AIPTEK_TILT_MIN;
- aiptek->inputdev.absmax[ABS_TILT_Y] = AIPTEK_TILT_MAX;
- aiptek->inputdev.absmin[ABS_WHEEL] = AIPTEK_WHEEL_MIN;
- aiptek->inputdev.absmax[ABS_WHEEL] = AIPTEK_WHEEL_MAX - 1;
- aiptek->inputdev.absfuzz[ABS_X] = 0;
- aiptek->inputdev.absfuzz[ABS_Y] = 0;
- aiptek->inputdev.absfuzz[ABS_PRESSURE] = 0;
- aiptek->inputdev.absfuzz[ABS_TILT_X] = 0;
- aiptek->inputdev.absfuzz[ABS_TILT_Y] = 0;
- aiptek->inputdev.absfuzz[ABS_WHEEL] = 0;
- aiptek->inputdev.absflat[ABS_X] = 0;
- aiptek->inputdev.absflat[ABS_Y] = 0;
- aiptek->inputdev.absflat[ABS_PRESSURE] = 0;
- aiptek->inputdev.absflat[ABS_TILT_X] = 0;
- aiptek->inputdev.absflat[ABS_TILT_Y] = 0;
- aiptek->inputdev.absflat[ABS_WHEEL] = 0;
- aiptek->inputdev.name = "Aiptek";
- aiptek->inputdev.phys = aiptek->features.usbPath;
- usb_to_input_id(usbdev, &aiptek->inputdev.id);
- aiptek->inputdev.dev = &intf->dev;
-
- aiptek->usbdev = usbdev;
- aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
- aiptek->inDelay = 0;
- aiptek->endDelay = 0;
- aiptek->previousJitterable = 0;
+ input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
+ input_set_abs_params(inputdev, ABS_X, 0, 2249, 0, 0);
+ input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
endpoint = &intf->altsetting[0].endpoint[0].desc;
@@ -2150,28 +2124,6 @@
aiptek->urb->transfer_dma = aiptek->data_dma;
aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- /* Register the tablet as an Input Device
- */
- input_register_device(&aiptek->inputdev);
-
- /* We now will look for the evdev device which is mapped to
- * the tablet. The partial name is kept in the link list of
- * input_handles associated with this input device.
- * What identifies an evdev input_handler is that it begins
- * with 'event', continues with a digit, and that in turn
- * is mapped to /{devfs}/input/eventN.
- */
- inputdev = &aiptek->inputdev;
- list_for_each_safe(node, next, &inputdev->h_list) {
- inputhandle = to_handle(node);
- if (strncmp(inputhandle->name, "event", 5) == 0) {
- strcpy(aiptek->features.inputPath, inputhandle->name);
- break;
- }
- }
-
- info("input: Aiptek on %s (%s)\n", path, aiptek->features.inputPath);
-
/* Program the tablet. This sets the tablet up in the mode
* specified in newSetting, and also queries the tablet's
* physical capacities.
@@ -2186,13 +2138,32 @@
for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) {
aiptek->curSetting.programmableDelay = speeds[i];
(void)aiptek_program_tablet(aiptek);
- if (aiptek->inputdev.absmax[ABS_X] > 0) {
+ if (aiptek->inputdev->absmax[ABS_X] > 0) {
info("input: Aiptek using %d ms programming speed\n",
aiptek->curSetting.programmableDelay);
break;
}
}
+ /* Register the tablet as an Input Device
+ */
+ input_register_device(aiptek->inputdev);
+
+ /* We now will look for the evdev device which is mapped to
+ * the tablet. The partial name is kept in the link list of
+ * input_handles associated with this input device.
+ * What identifies an evdev input_handler is that it begins
+ * with 'event', continues with a digit, and that in turn
+ * is mapped to input/eventN.
+ */
+ list_for_each_safe(node, next, &inputdev->h_list) {
+ inputhandle = to_handle(node);
+ if (strncmp(inputhandle->name, "event", 5) == 0) {
+ strcpy(aiptek->features.inputPath, inputhandle->name);
+ break;
+ }
+ }
+
/* Associate this driver's struct with the usb interface.
*/
usb_set_intfdata(intf, aiptek);
@@ -2207,6 +2178,12 @@
info("aiptek: error loading 'evdev' module");
return 0;
+
+fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+ aiptek->data_dma);
+fail1: input_free_device(inputdev);
+ kfree(aiptek);
+ return -ENOMEM;
}
/* Forward declaration */
@@ -2234,7 +2211,7 @@
/* Free & unhook everything from the system.
*/
usb_kill_urb(aiptek->urb);
- input_unregister_device(&aiptek->inputdev);
+ input_unregister_device(aiptek->inputdev);
aiptek_delete_files(&intf->dev);
usb_free_urb(aiptek->urb);
usb_buffer_free(interface_to_usbdev(intf),
diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c
index e03c1c5..15840db 100644
--- a/drivers/usb/input/appletouch.c
+++ b/drivers/usb/input/appletouch.c
@@ -39,7 +39,7 @@
#define APPLE_VENDOR_ID 0x05AC
#define ATP_DEVICE(prod) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
USB_DEVICE_ID_MATCH_INT_CLASS | \
USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
.idVendor = APPLE_VENDOR_ID, \
@@ -78,9 +78,9 @@
* We try to keep the touchpad aspect ratio while still doing only simple
* arithmetics.
* The factors below give coordinates like:
- * 0 <= x < 960 on 12" and 15" Powerbooks
- * 0 <= x < 1600 on 17" Powerbooks
- * 0 <= y < 646
+ * 0 <= x < 960 on 12" and 15" Powerbooks
+ * 0 <= x < 1600 on 17" Powerbooks
+ * 0 <= y < 646
*/
#define ATP_XFACT 64
#define ATP_YFACT 43
@@ -93,11 +93,12 @@
/* Structure to hold all of our device specific stuff */
struct atp {
+ char phys[64];
struct usb_device * udev; /* usb device */
struct urb * urb; /* usb request block */
signed char * data; /* transferred data */
int open; /* non-zero if opened */
- struct input_dev input; /* input dev */
+ struct input_dev *input; /* input dev */
int valid; /* are the sensors valid ? */
int x_old; /* last reported x/y, */
int y_old; /* used for smoothing */
@@ -114,11 +115,11 @@
int i; \
printk("appletouch: %s %lld", msg, (long long)jiffies); \
for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \
- printk(" %02x", tab[i]); \
- printk("\n"); \
+ printk(" %02x", tab[i]); \
+ printk("\n"); \
}
-#define dprintk(format, a...) \
+#define dprintk(format, a...) \
do { \
if (debug) printk(format, ##a); \
} while (0)
@@ -219,8 +220,8 @@
for (i = 16; i < ATP_XSENSORS; i++)
if (dev->xy_cur[i]) {
printk("appletouch: 17\" model detected.\n");
- input_set_abs_params(&dev->input, ABS_X, 0,
- (ATP_XSENSORS - 1) *
+ input_set_abs_params(dev->input, ABS_X, 0,
+ (ATP_XSENSORS - 1) *
ATP_XFACT - 1,
ATP_FUZZ, 0);
break;
@@ -260,12 +261,12 @@
"Xz: %3d Yz: %3d\n",
x, y, x_z, y_z);
- input_report_key(&dev->input, BTN_TOUCH, 1);
- input_report_abs(&dev->input, ABS_X, x);
- input_report_abs(&dev->input, ABS_Y, y);
- input_report_abs(&dev->input, ABS_PRESSURE,
+ input_report_key(dev->input, BTN_TOUCH, 1);
+ input_report_abs(dev->input, ABS_X, x);
+ input_report_abs(dev->input, ABS_Y, y);
+ input_report_abs(dev->input, ABS_PRESSURE,
min(ATP_PRESSURE, x_z + y_z));
- atp_report_fingers(&dev->input, max(x_f, y_f));
+ atp_report_fingers(dev->input, max(x_f, y_f));
}
dev->x_old = x;
dev->y_old = y;
@@ -273,17 +274,17 @@
else if (!x && !y) {
dev->x_old = dev->y_old = -1;
- input_report_key(&dev->input, BTN_TOUCH, 0);
- input_report_abs(&dev->input, ABS_PRESSURE, 0);
- atp_report_fingers(&dev->input, 0);
+ input_report_key(dev->input, BTN_TOUCH, 0);
+ input_report_abs(dev->input, ABS_PRESSURE, 0);
+ atp_report_fingers(dev->input, 0);
/* reset the accumulator on release */
memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
}
- input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]);
+ input_report_key(dev->input, BTN_LEFT, !!dev->data[80]);
- input_sync(&dev->input);
+ input_sync(dev->input);
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -314,21 +315,14 @@
static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
- struct atp *dev = NULL;
+ struct atp *dev;
+ struct input_dev *input_dev;
+ struct usb_device *udev = interface_to_usbdev(iface);
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
int int_in_endpointAddr = 0;
int i, retval = -ENOMEM;
- /* allocate memory for our device state and initialize it */
- dev = kmalloc(sizeof(struct atp), GFP_KERNEL);
- if (dev == NULL) {
- err("Out of memory");
- goto err_kmalloc;
- }
- memset(dev, 0, sizeof(struct atp));
-
- dev->udev = interface_to_usbdev(iface);
/* set up the endpoint information */
/* use only the first interrupt-in endpoint */
@@ -345,70 +339,82 @@
}
}
if (!int_in_endpointAddr) {
- retval = -EIO;
err("Could not find int-in endpoint");
- goto err_endpoint;
+ return -EIO;
}
- /* save our data pointer in this interface device */
- usb_set_intfdata(iface, dev);
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!dev || !input_dev) {
+ err("Out of memory");
+ goto err_free_devs;
+ }
+
+ dev->udev = udev;
+ dev->input = input_dev;
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb) {
retval = -ENOMEM;
- goto err_usballoc;
+ goto err_free_devs;
}
+
dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL,
&dev->urb->transfer_dma);
if (!dev->data) {
retval = -ENOMEM;
- goto err_usbbufalloc;
+ goto err_free_urb;
}
- usb_fill_int_urb(dev->urb, dev->udev,
- usb_rcvintpipe(dev->udev, int_in_endpointAddr),
+
+ usb_fill_int_urb(dev->urb, udev,
+ usb_rcvintpipe(udev, int_in_endpointAddr),
dev->data, ATP_DATASIZE, atp_complete, dev, 1);
- init_input_dev(&dev->input);
- dev->input.name = "appletouch";
- dev->input.dev = &iface->dev;
- dev->input.private = dev;
- dev->input.open = atp_open;
- dev->input.close = atp_close;
+ usb_make_path(udev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
- usb_to_input_id(dev->udev, &dev->input.id);
+ input_dev->name = "appletouch";
+ input_dev->phys = dev->phys;
+ usb_to_input_id(dev->udev, &input_dev->id);
+ input_dev->cdev.dev = &iface->dev;
- set_bit(EV_ABS, dev->input.evbit);
+ input_dev->private = dev;
+ input_dev->open = atp_open;
+ input_dev->close = atp_close;
+
+ set_bit(EV_ABS, input_dev->evbit);
/*
* 12" and 15" Powerbooks only have 16 x sensors,
* 17" models are detected later.
*/
- input_set_abs_params(&dev->input, ABS_X, 0,
+ input_set_abs_params(input_dev, ABS_X, 0,
(16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
- input_set_abs_params(&dev->input, ABS_Y, 0,
+ input_set_abs_params(input_dev, ABS_Y, 0,
(ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
- input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
- set_bit(EV_KEY, dev->input.evbit);
- set_bit(BTN_TOUCH, dev->input.keybit);
- set_bit(BTN_TOOL_FINGER, dev->input.keybit);
- set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit);
- set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit);
- set_bit(BTN_LEFT, dev->input.keybit);
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(BTN_TOUCH, input_dev->keybit);
+ set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ set_bit(BTN_LEFT, input_dev->keybit);
- input_register_device(&dev->input);
+ input_register_device(dev->input);
- printk(KERN_INFO "input: appletouch connected\n");
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(iface, dev);
return 0;
-err_usbbufalloc:
+ err_free_urb:
usb_free_urb(dev->urb);
-err_usballoc:
+ err_free_devs:
usb_set_intfdata(iface, NULL);
-err_endpoint:
kfree(dev);
-err_kmalloc:
+ input_free_device(input_dev);
return retval;
}
@@ -419,7 +425,7 @@
usb_set_intfdata(iface, NULL);
if (dev) {
usb_kill_urb(dev->urb);
- input_unregister_device(&dev->input);
+ input_unregister_device(dev->input);
usb_free_urb(dev->urb);
usb_buffer_free(dev->udev, ATP_DATASIZE,
dev->data, dev->urb->transfer_dma);
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index fd99681..9a2a47d 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -112,7 +112,6 @@
#define NAME_BUFSIZE 80 /* size of product name, path buffers */
#define DATA_BUFSIZE 63 /* size of URB data buffers */
-#define ATI_INPUTNUM 1 /* Which input device to register as */
static unsigned long channel_mask;
module_param(channel_mask, ulong, 0444);
@@ -162,7 +161,7 @@
static DECLARE_MUTEX(disconnect_sem);
struct ati_remote {
- struct input_dev idev;
+ struct input_dev *idev;
struct usb_device *udev;
struct usb_interface *interface;
@@ -198,15 +197,13 @@
#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
/* Translation table from hardware messages to input events. */
-static struct
-{
+static struct {
short kind;
unsigned char data1, data2;
int type;
unsigned int code;
int value;
-} ati_remote_tbl[] =
-{
+} ati_remote_tbl[] = {
/* Directional control pad axes */
{KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
{KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
@@ -286,7 +283,6 @@
/* Local function prototypes */
static void ati_remote_dump (unsigned char *data, unsigned int actual_length);
-static void ati_remote_delete (struct ati_remote *dev);
static int ati_remote_open (struct input_dev *inputdev);
static void ati_remote_close (struct input_dev *inputdev);
static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
@@ -428,7 +424,7 @@
{
struct ati_remote *ati_remote = urb->context;
unsigned char *data= ati_remote->inbuf;
- struct input_dev *dev = &ati_remote->idev;
+ struct input_dev *dev = ati_remote->idev;
int index, acc;
int remote_num;
@@ -587,17 +583,42 @@
}
/*
- * ati_remote_delete
+ * ati_remote_alloc_buffers
*/
-static void ati_remote_delete(struct ati_remote *ati_remote)
+static int ati_remote_alloc_buffers(struct usb_device *udev,
+ struct ati_remote *ati_remote)
+{
+ ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
+ &ati_remote->inbuf_dma);
+ if (!ati_remote->inbuf)
+ return -1;
+
+ ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
+ &ati_remote->outbuf_dma);
+ if (!ati_remote->outbuf)
+ return -1;
+
+ ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->irq_urb)
+ return -1;
+
+ ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->out_urb)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * ati_remote_free_buffers
+ */
+static void ati_remote_free_buffers(struct ati_remote *ati_remote)
{
if (ati_remote->irq_urb)
- usb_kill_urb(ati_remote->irq_urb);
+ usb_free_urb(ati_remote->irq_urb);
if (ati_remote->out_urb)
- usb_kill_urb(ati_remote->out_urb);
-
- input_unregister_device(&ati_remote->idev);
+ usb_free_urb(ati_remote->out_urb);
if (ati_remote->inbuf)
usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
@@ -605,20 +626,12 @@
if (ati_remote->outbuf)
usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
- ati_remote->outbuf, ati_remote->outbuf_dma);
-
- if (ati_remote->irq_urb)
- usb_free_urb(ati_remote->irq_urb);
-
- if (ati_remote->out_urb)
- usb_free_urb(ati_remote->out_urb);
-
- kfree(ati_remote);
+ ati_remote->inbuf, ati_remote->outbuf_dma);
}
static void ati_remote_input_init(struct ati_remote *ati_remote)
{
- struct input_dev *idev = &(ati_remote->idev);
+ struct input_dev *idev = ati_remote->idev;
int i;
idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
@@ -637,7 +650,7 @@
idev->phys = ati_remote->phys;
usb_to_input_id(ati_remote->udev, &idev->id);
- idev->dev = &ati_remote->udev->dev;
+ idev->cdev.dev = &ati_remote->udev->dev;
}
static int ati_remote_initialize(struct ati_remote *ati_remote)
@@ -674,7 +687,7 @@
(ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
dev_err(&ati_remote->interface->dev,
"Initializing ati_remote hardware failed.\n");
- return 1;
+ return -EIO;
}
return 0;
@@ -686,95 +699,83 @@
static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
- struct ati_remote *ati_remote = NULL;
- struct usb_host_interface *iface_host;
- int retval = -ENOMEM;
- char path[64];
+ struct usb_host_interface *iface_host = interface->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
+ struct ati_remote *ati_remote;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- /* Allocate and clear an ati_remote struct */
- if (!(ati_remote = kmalloc(sizeof (struct ati_remote), GFP_KERNEL)))
- return -ENOMEM;
- memset(ati_remote, 0x00, sizeof (struct ati_remote));
-
- iface_host = interface->cur_altsetting;
if (iface_host->desc.bNumEndpoints != 2) {
err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__);
- retval = -ENODEV;
- goto error;
+ return -ENODEV;
}
- ati_remote->endpoint_in = &(iface_host->endpoint[0].desc);
- ati_remote->endpoint_out = &(iface_host->endpoint[1].desc);
- ati_remote->udev = udev;
- ati_remote->interface = interface;
+ endpoint_in = &iface_host->endpoint[0].desc;
+ endpoint_out = &iface_host->endpoint[1].desc;
- if (!(ati_remote->endpoint_in->bEndpointAddress & 0x80)) {
+ if (!(endpoint_in->bEndpointAddress & USB_DIR_IN)) {
err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__);
- retval = -ENODEV;
- goto error;
+ return -ENODEV;
}
- if ((ati_remote->endpoint_in->bmAttributes & 3) != 3) {
+ if ((endpoint_in->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) {
err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__);
- retval = -ENODEV;
- goto error;
+ return -ENODEV;
}
- if (le16_to_cpu(ati_remote->endpoint_in->wMaxPacketSize) == 0) {
+ if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
err("%s: endpoint_in message size==0? \n", __FUNCTION__);
- retval = -ENODEV;
- goto error;
+ return -ENODEV;
}
+ ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ati_remote || !input_dev)
+ goto fail1;
+
/* Allocate URB buffers, URBs */
- ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
- &ati_remote->inbuf_dma);
- if (!ati_remote->inbuf)
- goto error;
+ if (ati_remote_alloc_buffers(udev, ati_remote))
+ goto fail2;
- ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
- &ati_remote->outbuf_dma);
- if (!ati_remote->outbuf)
- goto error;
+ ati_remote->endpoint_in = endpoint_in;
+ ati_remote->endpoint_out = endpoint_out;
+ ati_remote->udev = udev;
+ ati_remote->idev = input_dev;
+ ati_remote->interface = interface;
- ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ati_remote->irq_urb)
- goto error;
+ usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
+ strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
- ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ati_remote->out_urb)
- goto error;
-
- usb_make_path(udev, path, NAME_BUFSIZE);
- sprintf(ati_remote->phys, "%s/input%d", path, ATI_INPUTNUM);
if (udev->manufacturer)
- strcat(ati_remote->name, udev->manufacturer);
+ strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
if (udev->product)
- sprintf(ati_remote->name, "%s %s", ati_remote->name, udev->product);
+ snprintf(ati_remote->name, sizeof(ati_remote->name),
+ "%s %s", ati_remote->name, udev->product);
if (!strlen(ati_remote->name))
- sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)",
+ snprintf(ati_remote->name, sizeof(ati_remote->name),
+ DRIVER_DESC "(%04x,%04x)",
le16_to_cpu(ati_remote->udev->descriptor.idVendor),
le16_to_cpu(ati_remote->udev->descriptor.idProduct));
+ ati_remote_input_init(ati_remote);
+
/* Device Hardware Initialization - fills in ati_remote->idev from udev. */
- retval = ati_remote_initialize(ati_remote);
- if (retval)
- goto error;
+ err = ati_remote_initialize(ati_remote);
+ if (err)
+ goto fail3;
/* Set up and register input device */
- ati_remote_input_init(ati_remote);
- input_register_device(&ati_remote->idev);
-
- dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n",
- ati_remote->name, path);
+ input_register_device(ati_remote->idev);
usb_set_intfdata(interface, ati_remote);
+ return 0;
-error:
- if (retval)
- ati_remote_delete(ati_remote);
-
- return retval;
+fail3: usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+fail2: ati_remote_free_buffers(ati_remote);
+fail1: input_free_device(input_dev);
+ kfree(ati_remote);
+ return err;
}
/*
@@ -791,7 +792,11 @@
return;
}
- ati_remote_delete(ati_remote);
+ usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+ input_unregister_device(ati_remote->idev);
+ ati_remote_free_buffers(ati_remote);
+ kfree(ati_remote);
}
/*
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 41f92b9..79ddce4 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1619,8 +1619,8 @@
struct hid_descriptor *hdesc;
struct hid_device *hid;
unsigned quirks = 0, rsize = 0;
- char *buf, *rdesc;
- int n, insize = 0;
+ char *rdesc;
+ int n, len, insize = 0;
for (n = 0; hid_blacklist[n].idVendor; n++)
if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) &&
@@ -1630,10 +1630,11 @@
if (quirks & HID_QUIRK_IGNORE)
return NULL;
- if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && ((!interface->desc.bNumEndpoints) ||
- usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
- dbg("class descriptor not present\n");
- return NULL;
+ if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) &&
+ (!interface->desc.bNumEndpoints ||
+ usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
+ dbg("class descriptor not present\n");
+ return NULL;
}
for (n = 0; n < hdesc->bNumDescriptors; n++)
@@ -1749,38 +1750,43 @@
hid->name[0] = 0;
- if (!(buf = kmalloc(64, GFP_KERNEL)))
- goto fail;
+ if (dev->manufacturer)
+ strlcpy(hid->name, dev->manufacturer, sizeof(hid->name));
- if (dev->manufacturer) {
- strcat(hid->name, dev->manufacturer);
- if (dev->product)
- snprintf(hid->name, 64, "%s %s", hid->name, dev->product);
- } else if (dev->product) {
- snprintf(hid->name, 128, "%s", dev->product);
- } else
- snprintf(hid->name, 128, "%04x:%04x",
- le16_to_cpu(dev->descriptor.idVendor),
- le16_to_cpu(dev->descriptor.idProduct));
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(hid->name, " ", sizeof(hid->name));
+ strlcat(hid->name, dev->product, sizeof(hid->name));
+ }
- usb_make_path(dev, buf, 64);
- snprintf(hid->phys, 64, "%s/input%d", buf,
- intf->altsetting[0].desc.bInterfaceNumber);
+ if (!strlen(hid->name))
+ snprintf(hid->name, sizeof(hid->name), "HID %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ usb_make_path(dev, hid->phys, sizeof(hid->phys));
+ strlcat(hid->phys, "/input", sizeof(hid->phys));
+ len = strlen(hid->phys);
+ if (len < sizeof(hid->phys) - 1)
+ snprintf(hid->phys + len, sizeof(hid->phys) - len,
+ "%d", intf->altsetting[0].desc.bInterfaceNumber);
if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0)
hid->uniq[0] = 0;
- kfree(buf);
-
hid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
if (!hid->urbctrl)
goto fail;
+
usb_fill_control_urb(hid->urbctrl, dev, 0, (void *) hid->cr,
hid->ctrlbuf, 1, hid_ctrl, hid);
hid->urbctrl->setup_dma = hid->cr_dma;
hid->urbctrl->transfer_dma = hid->ctrlbuf_dma;
hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
+ /* May be needed for some devices */
+ usb_clear_halt(hid->dev, hid->urbin->pipe);
+
return hid;
fail:
@@ -1884,7 +1890,6 @@
struct hid_device *hid = usb_get_intfdata (intf);
usb_kill_urb(hid->urbin);
- intf->dev.power.power_state = PMSG_SUSPEND;
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
@@ -1894,7 +1899,6 @@
struct hid_device *hid = usb_get_intfdata (intf);
int status;
- intf->dev.power.power_state = PMSG_ON;
if (hid->open)
status = usb_submit_urb(hid->urbin, GFP_NOIO);
else
diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c
index 0b64522..9ff25eb 100644
--- a/drivers/usb/input/hid-input.c
+++ b/drivers/usb/input/hid-input.c
@@ -76,8 +76,8 @@
static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field,
struct hid_usage *usage)
{
- struct input_dev *input = &hidinput->input;
- struct hid_device *device = hidinput->input.private;
+ struct input_dev *input = hidinput->input;
+ struct hid_device *device = input->private;
int max = 0, code;
unsigned long *bit = NULL;
@@ -461,7 +461,8 @@
if (!field->hidinput)
return;
- input = &field->hidinput->input;
+
+ input = field->hidinput->input;
input_regs(input, regs);
@@ -533,13 +534,10 @@
void hidinput_report_event(struct hid_device *hid, struct hid_report *report)
{
- struct list_head *lh;
struct hid_input *hidinput;
- list_for_each (lh, &hid->inputs) {
- hidinput = list_entry(lh, struct hid_input, list);
- input_sync(&hidinput->input);
- }
+ list_for_each_entry(hidinput, &hid->inputs, list)
+ input_sync(hidinput->input);
}
static int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field)
@@ -604,6 +602,7 @@
struct usb_device *dev = hid->dev;
struct hid_report *report;
struct hid_input *hidinput = NULL;
+ struct input_dev *input_dev;
int i, j, k;
INIT_LIST_HEAD(&hid->inputs);
@@ -624,25 +623,28 @@
continue;
if (!hidinput) {
- hidinput = kmalloc(sizeof(*hidinput), GFP_KERNEL);
- if (!hidinput) {
+ hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!hidinput || !input_dev) {
+ kfree(hidinput);
+ input_free_device(input_dev);
err("Out of memory during hid input probe");
return -1;
}
- memset(hidinput, 0, sizeof(*hidinput));
+ input_dev->private = hid;
+ input_dev->event = hidinput_input_event;
+ input_dev->open = hidinput_open;
+ input_dev->close = hidinput_close;
+
+ input_dev->name = hid->name;
+ input_dev->phys = hid->phys;
+ input_dev->uniq = hid->uniq;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &hid->intf->dev;
+
+ hidinput->input = input_dev;
list_add_tail(&hidinput->list, &hid->inputs);
-
- hidinput->input.private = hid;
- hidinput->input.event = hidinput_input_event;
- hidinput->input.open = hidinput_open;
- hidinput->input.close = hidinput_close;
-
- hidinput->input.name = hid->name;
- hidinput->input.phys = hid->phys;
- hidinput->input.uniq = hid->uniq;
- usb_to_input_id(dev, &hidinput->input.id);
- hidinput->input.dev = &hid->intf->dev;
}
for (i = 0; i < report->maxfield; i++)
@@ -657,7 +659,7 @@
* UGCI) cram a lot of unrelated inputs into the
* same interface. */
hidinput->report = report;
- input_register_device(&hidinput->input);
+ input_register_device(hidinput->input);
hidinput = NULL;
}
}
@@ -667,7 +669,7 @@
* only useful in this case, and not for multi-input quirks. */
if (hidinput) {
hid_ff_init(hid);
- input_register_device(&hidinput->input);
+ input_register_device(hidinput->input);
}
return 0;
@@ -675,13 +677,11 @@
void hidinput_disconnect(struct hid_device *hid)
{
- struct list_head *lh, *next;
- struct hid_input *hidinput;
+ struct hid_input *hidinput, *next;
- list_for_each_safe(lh, next, &hid->inputs) {
- hidinput = list_entry(lh, struct hid_input, list);
- input_unregister_device(&hidinput->input);
+ list_for_each_entry_safe(hidinput, next, &hid->inputs, list) {
list_del(&hidinput->list);
+ input_unregister_device(hidinput->input);
kfree(hidinput);
}
}
diff --git a/drivers/usb/input/hid-lgff.c b/drivers/usb/input/hid-lgff.c
index 0c4c77a..f82c9c9 100644
--- a/drivers/usb/input/hid-lgff.c
+++ b/drivers/usb/input/hid-lgff.c
@@ -255,22 +255,19 @@
u16 idVendor = le16_to_cpu(hid->dev->descriptor.idVendor);
u16 idProduct = le16_to_cpu(hid->dev->descriptor.idProduct);
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+ struct input_dev *input_dev = hidinput->input;
while (dev->idVendor && (idVendor != dev->idVendor || idProduct != dev->idProduct))
dev++;
- ff = dev->ff;
+ for (ff = dev->ff; *ff >= 0; ff++)
+ set_bit(*ff, input_dev->ffbit);
- while (*ff >= 0) {
- set_bit(*ff, hidinput->input.ffbit);
- ++ff;
- }
+ input_dev->upload_effect = hid_lgff_upload_effect;
+ input_dev->flush = hid_lgff_flush;
- hidinput->input.upload_effect = hid_lgff_upload_effect;
- hidinput->input.flush = hid_lgff_flush;
-
- set_bit(EV_FF, hidinput->input.evbit);
- hidinput->input.ff_effects_max = LGFF_EFFECTS;
+ set_bit(EV_FF, input_dev->evbit);
+ input_dev->ff_effects_max = LGFF_EFFECTS;
}
static void hid_lgff_exit(struct hid_device* hid)
diff --git a/drivers/usb/input/hid-tmff.c b/drivers/usb/input/hid-tmff.c
index 8f6a0a6..023fd5a 100644
--- a/drivers/usb/input/hid-tmff.c
+++ b/drivers/usb/input/hid-tmff.c
@@ -111,6 +111,7 @@
struct tmff_device *private;
struct list_head *pos;
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+ struct input_dev *input_dev = hidinput->input;
private = kmalloc(sizeof(struct tmff_device), GFP_KERNEL);
if (!private)
@@ -155,7 +156,7 @@
private->report = report;
private->rumble = field;
- set_bit(FF_RUMBLE, hidinput->input.ffbit);
+ set_bit(FF_RUMBLE, input_dev->ffbit);
break;
default:
@@ -164,11 +165,11 @@
}
/* Fallthrough to here only when a valid usage is found */
- hidinput->input.upload_effect = hid_tmff_upload_effect;
- hidinput->input.flush = hid_tmff_flush;
+ input_dev->upload_effect = hid_tmff_upload_effect;
+ input_dev->flush = hid_tmff_flush;
- set_bit(EV_FF, hidinput->input.evbit);
- hidinput->input.ff_effects_max = TMFF_EFFECTS;
+ set_bit(EV_FF, input_dev->evbit);
+ input_dev->ff_effects_max = TMFF_EFFECTS;
}
}
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index ec2412c..ee48a22 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -371,7 +371,7 @@
struct hid_input {
struct list_head list;
struct hid_report *report;
- struct input_dev input;
+ struct input_dev *input;
};
struct hid_device { /* device report descriptor */
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index d324278..440377c 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -732,9 +732,8 @@
};
static struct usb_class_driver hiddev_class = {
- .name = "usb/hid/hiddev%d",
+ .name = "hiddev%d",
.fops = &hiddev_fops,
- .mode = S_IFCHR | S_IRUGO | S_IWUSR,
.minor_base = HIDDEV_MINOR_BASE,
};
diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c
index becb87e..3b58185 100644
--- a/drivers/usb/input/itmtouch.c
+++ b/drivers/usb/input/itmtouch.c
@@ -73,7 +73,7 @@
struct itmtouch_dev {
struct usb_device *usbdev; /* usb device */
- struct input_dev inputdev; /* input device */
+ struct input_dev *inputdev; /* input device */
struct urb *readurb; /* urb */
char rbuf[ITM_BUFSIZE]; /* data */
int users;
@@ -88,9 +88,9 @@
static void itmtouch_irq(struct urb *urb, struct pt_regs *regs)
{
- struct itmtouch_dev * itmtouch = urb->context;
+ struct itmtouch_dev *itmtouch = urb->context;
unsigned char *data = urb->transfer_buffer;
- struct input_dev *dev = &itmtouch->inputdev;
+ struct input_dev *dev = itmtouch->inputdev;
int retval;
switch (urb->status) {
@@ -156,49 +156,62 @@
static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct itmtouch_dev *itmtouch;
+ struct input_dev *input_dev;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
unsigned int pipe;
unsigned int maxp;
- char path[PATH_SIZE];
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- if (!(itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL))) {
+ itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!itmtouch || !input_dev) {
err("%s - Out of memory.", __FUNCTION__);
- return -ENOMEM;
+ goto fail;
}
itmtouch->usbdev = udev;
+ itmtouch->inputdev = input_dev;
- itmtouch->inputdev.private = itmtouch;
- itmtouch->inputdev.open = itmtouch_open;
- itmtouch->inputdev.close = itmtouch_close;
+ if (udev->manufacturer)
+ strlcpy(itmtouch->name, udev->manufacturer, sizeof(itmtouch->name));
- usb_make_path(udev, path, PATH_SIZE);
-
- itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- itmtouch->inputdev.name = itmtouch->name;
- itmtouch->inputdev.phys = itmtouch->phys;
- usb_to_input_id(udev, &itmtouch->inputdev.id);
- itmtouch->inputdev.dev = &intf->dev;
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(itmtouch->name, " ", sizeof(itmtouch->name));
+ strlcat(itmtouch->name, udev->product, sizeof(itmtouch->name));
+ }
if (!strlen(itmtouch->name))
sprintf(itmtouch->name, "USB ITM touchscreen");
+ usb_make_path(udev, itmtouch->phys, sizeof(itmtouch->phys));
+ strlcpy(itmtouch->phys, "/input0", sizeof(itmtouch->phys));
+
+ input_dev->name = itmtouch->name;
+ input_dev->phys = itmtouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = itmtouch;
+
+ input_dev->open = itmtouch_open;
+ input_dev->close = itmtouch_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
/* device limits */
/* as specified by the ITM datasheet, X and Y are 12bit,
* Z (pressure) is 8 bit. However, the fields are defined up
* to 14 bits for future possible expansion.
*/
- input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0);
- input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0);
- input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, 0x0FFF, 2, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 0x0FFF, 2, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 2, 0);
/* initialise the URB so we can read from the transport stream */
pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
@@ -208,22 +221,23 @@
maxp = ITM_BUFSIZE;
itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);
-
if (!itmtouch->readurb) {
dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__);
- kfree(itmtouch);
- return -ENOMEM;
+ goto fail;
}
usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf,
maxp, itmtouch_irq, itmtouch, endpoint->bInterval);
- input_register_device(&itmtouch->inputdev);
+ input_register_device(itmtouch->inputdev);
- printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path);
usb_set_intfdata(intf, itmtouch);
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(itmtouch);
+ return -ENOMEM;
}
static void itmtouch_disconnect(struct usb_interface *intf)
@@ -233,7 +247,7 @@
usb_set_intfdata(intf, NULL);
if (itmtouch) {
- input_unregister_device(&itmtouch->inputdev);
+ input_unregister_device(itmtouch->inputdev);
usb_kill_urb(itmtouch->readurb);
usb_free_urb(itmtouch->readurb);
kfree(itmtouch);
diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c
index b6f6ac8..a248664 100644
--- a/drivers/usb/input/kbtab.c
+++ b/drivers/usb/input/kbtab.c
@@ -34,7 +34,7 @@
struct kbtab {
signed char *data;
dma_addr_t data_dma;
- struct input_dev dev;
+ struct input_dev *dev;
struct usb_device *usbdev;
struct urb *irq;
int x, y;
@@ -48,7 +48,7 @@
{
struct kbtab *kbtab = urb->context;
unsigned char *data = kbtab->data;
- struct input_dev *dev = &kbtab->dev;
+ struct input_dev *dev = kbtab->dev;
int retval;
switch (urb->status) {
@@ -124,53 +124,43 @@
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *endpoint;
struct kbtab *kbtab;
- char path[64];
+ struct input_dev *input_dev;
- if (!(kbtab = kmalloc(sizeof(struct kbtab), GFP_KERNEL)))
- return -ENOMEM;
- memset(kbtab, 0, sizeof(struct kbtab));
+ kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!kbtab || !input_dev)
+ goto fail1;
kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma);
- if (!kbtab->data) {
- kfree(kbtab);
- return -ENOMEM;
- }
+ if (!kbtab->data)
+ goto fail1;
kbtab->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!kbtab->irq) {
- usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
- kfree(kbtab);
- return -ENOMEM;
- }
+ if (!kbtab->irq)
+ goto fail2;
- kbtab->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
- kbtab->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
-
- kbtab->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
-
- kbtab->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH);
-
- kbtab->dev.mscbit[0] |= BIT(MSC_SERIAL);
-
- kbtab->dev.absmax[ABS_X] = 0x2000;
- kbtab->dev.absmax[ABS_Y] = 0x1750;
- kbtab->dev.absmax[ABS_PRESSURE] = 0xff;
-
- kbtab->dev.absfuzz[ABS_X] = 4;
- kbtab->dev.absfuzz[ABS_Y] = 4;
-
- kbtab->dev.private = kbtab;
- kbtab->dev.open = kbtab_open;
- kbtab->dev.close = kbtab_close;
-
- usb_make_path(dev, path, 64);
- sprintf(kbtab->phys, "%s/input0", path);
-
- kbtab->dev.name = "KB Gear Tablet";
- kbtab->dev.phys = kbtab->phys;
- usb_to_input_id(dev, &kbtab->dev.id);
- kbtab->dev.dev = &intf->dev;
kbtab->usbdev = dev;
+ kbtab->dev = input_dev;
+
+ usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys));
+ strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys));
+
+ input_dev->name = "KB Gear Tablet";
+ input_dev->phys = kbtab->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = kbtab;
+
+ input_dev->open = kbtab_open;
+ input_dev->close = kbtab_close;
+
+ input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH);
+ input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+ input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, 0x1750, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
endpoint = &intf->cur_altsetting->endpoint[0].desc;
@@ -181,23 +171,25 @@
kbtab->irq->transfer_dma = kbtab->data_dma;
kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(&kbtab->dev);
-
- printk(KERN_INFO "input: KB Gear Tablet on %s\n", path);
+ input_register_device(kbtab->dev);
usb_set_intfdata(intf, kbtab);
-
return 0;
+
+fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
+fail1: input_free_device(input_dev);
+ kfree(kbtab);
+ return -ENOMEM;
}
static void kbtab_disconnect(struct usb_interface *intf)
{
- struct kbtab *kbtab = usb_get_intfdata (intf);
+ struct kbtab *kbtab = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (kbtab) {
usb_kill_urb(kbtab->irq);
- input_unregister_device(&kbtab->dev);
+ input_unregister_device(kbtab->dev);
usb_free_urb(kbtab->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma);
kfree(kbtab);
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index 99de1b3..5b8d65f 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -20,6 +20,7 @@
#include <linux/moduleparam.h>
#include <linux/input.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#define DRIVER_VERSION "v0.1"
#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>"
@@ -75,7 +76,7 @@
char name[128];
char phys[64];
struct usb_device* udev;
- struct input_dev input;
+ struct input_dev *input;
struct usb_interface* interface;
struct usb_endpoint_descriptor* in_endpoint;
struct urb* irq_urb;
@@ -136,12 +137,11 @@
*/
static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
{
- char codes[4*RECV_SIZE];
+ char codes[4 * RECV_SIZE];
int i;
- for (i = 0; i < RECV_SIZE; i++) {
- snprintf(codes+i*3, 4, "%02x ", dev->in_buffer[i]);
- }
+ for (i = 0; i < RECV_SIZE; i++)
+ snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
dev_info(&dev->udev->dev, "%s\n", codes);
}
@@ -153,7 +153,7 @@
static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
{
if (dev->data.bits_left >= bits_needed)
- return(0);
+ return 0;
/*
* Somehow we've missed the last message. The message will be repeated
@@ -162,7 +162,7 @@
if (dev->data.pos >= dev->data.len) {
dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n",
__FUNCTION__, dev->data.pos, dev->data.len);
- return(-1);
+ return -1;
}
/* Load as much as we can into the tester. */
@@ -172,7 +172,7 @@
dev->data.bits_left += 8;
}
- return(0);
+ return 0;
}
/*
@@ -311,10 +311,10 @@
__FUNCTION__, message.system, message.button, message.toggle);
if (message.toggle != remote->toggle) {
- input_regs(&remote->input, regs);
- input_report_key(&remote->input, keyspan_key_table[message.button], 1);
- input_report_key(&remote->input, keyspan_key_table[message.button], 0);
- input_sync(&remote->input);
+ input_regs(remote->input, regs);
+ input_report_key(remote->input, keyspan_key_table[message.button], 1);
+ input_report_key(remote->input, keyspan_key_table[message.button], 0);
+ input_sync(remote->input);
remote->toggle = message.toggle;
}
@@ -397,14 +397,9 @@
{
struct usb_keyspan *remote = dev->private;
- if (remote->open++)
- return 0;
-
remote->irq_urb->dev = remote->udev;
- if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) {
- remote->open--;
+ if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
return -EIO;
- }
return 0;
}
@@ -413,8 +408,26 @@
{
struct usb_keyspan *remote = dev->private;
- if (!--remote->open)
- usb_kill_urb(remote->irq_urb);
+ usb_kill_urb(remote->irq_urb);
+}
+
+static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
+{
+
+ struct usb_endpoint_descriptor *endpoint;
+ int i;
+
+ for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+ endpoint = &iface->endpoint[i].desc;
+
+ if ((endpoint->bEndpointAddress & USB_DIR_IN) &&
+ ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+ /* we found our interrupt in endpoint */
+ return endpoint;
+ }
+ }
+
+ return NULL;
}
/*
@@ -422,110 +435,78 @@
*/
static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
- int i;
- int retval = -ENOMEM;
- char path[64];
- char *buf;
- struct usb_keyspan *remote = NULL;
- struct usb_host_interface *iface_desc;
+ struct usb_device *udev = interface_to_usbdev(interface);
struct usb_endpoint_descriptor *endpoint;
- struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
+ struct usb_keyspan *remote;
+ struct input_dev *input_dev;
+ int i, retval;
- /* allocate memory for our device state and initialize it */
- remote = kmalloc(sizeof(*remote), GFP_KERNEL);
- if (remote == NULL) {
- err("Out of memory\n");
- goto error;
+ endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
+ if (!endpoint)
+ return -ENODEV;
+
+ remote = kzalloc(sizeof(*remote), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!remote || !input_dev) {
+ retval = -ENOMEM;
+ goto fail1;
}
- memset(remote, 0x00, sizeof(*remote));
remote->udev = udev;
+ remote->input = input_dev;
remote->interface = interface;
+ remote->in_endpoint = endpoint;
remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
- /* set up the endpoint information */
- /* use only the first in interrupt endpoint */
- iface_desc = interface->cur_altsetting;
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if (!remote->in_endpoint &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
- /* we found our interrupt in endpoint */
- remote->in_endpoint = endpoint;
-
- remote->in_buffer = usb_buffer_alloc(remote->udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
- if (!remote->in_buffer) {
- retval = -ENOMEM;
- goto error;
- }
- }
- }
-
- if (!remote->in_endpoint) {
- err("Could not find interrupt input endpoint.\n");
- retval = -ENODEV;
- goto error;
+ remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
+ if (!remote->in_buffer) {
+ retval = -ENOMEM;
+ goto fail1;
}
remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!remote->irq_urb) {
- err("Failed to allocate urb.\n");
retval = -ENOMEM;
- goto error;
+ goto fail2;
}
- retval = keyspan_setup(remote->udev);
+ retval = keyspan_setup(udev);
if (retval) {
- err("Failed to setup device.\n");
retval = -ENODEV;
- goto error;
+ goto fail3;
}
- /*
- * Setup the input system with the bits we are going to be reporting
- */
- remote->input.evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */
- for (i = 0; i < 32; ++i) {
- if (keyspan_key_table[i] != KEY_RESERVED) {
- set_bit(keyspan_key_table[i], remote->input.keybit);
- }
+ if (udev->manufacturer)
+ strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(remote->name, " ", sizeof(remote->name));
+ strlcat(remote->name, udev->product, sizeof(remote->name));
}
- remote->input.private = remote;
- remote->input.open = keyspan_open;
- remote->input.close = keyspan_close;
-
- usb_make_path(remote->udev, path, 64);
- sprintf(remote->phys, "%s/input0", path);
-
- remote->input.name = remote->name;
- remote->input.phys = remote->phys;
- remote->input.id.bustype = BUS_USB;
- remote->input.id.vendor = le16_to_cpu(remote->udev->descriptor.idVendor);
- remote->input.id.product = le16_to_cpu(remote->udev->descriptor.idProduct);
- remote->input.id.version = le16_to_cpu(remote->udev->descriptor.bcdDevice);
-
- if (!(buf = kmalloc(63, GFP_KERNEL))) {
- usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
- kfree(remote);
- return -ENOMEM;
- }
-
- if (remote->udev->descriptor.iManufacturer &&
- usb_string(remote->udev, remote->udev->descriptor.iManufacturer, buf, 63) > 0)
- strcat(remote->name, buf);
-
- if (remote->udev->descriptor.iProduct &&
- usb_string(remote->udev, remote->udev->descriptor.iProduct, buf, 63) > 0)
- sprintf(remote->name, "%s %s", remote->name, buf);
-
if (!strlen(remote->name))
- sprintf(remote->name, "USB Keyspan Remote %04x:%04x",
- remote->input.id.vendor, remote->input.id.product);
+ snprintf(remote->name, sizeof(remote->name),
+ "USB Keyspan Remote %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
- kfree(buf);
+ usb_make_path(udev, remote->phys, sizeof(remote->phys));
+ strlcat(remote->phys, "/input0", sizeof(remote->phys));
+
+ input_dev->name = remote->name;
+ input_dev->phys = remote->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &interface->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */
+ for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
+ if (keyspan_key_table[i] != KEY_RESERVED)
+ set_bit(keyspan_key_table[i], input_dev->keybit);
+
+ input_dev->private = remote;
+ input_dev->open = keyspan_open;
+ input_dev->close = keyspan_close;
/*
* Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()
@@ -538,27 +519,17 @@
remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* we can register the device now, as it is ready */
- input_register_device(&remote->input);
+ input_register_device(remote->input);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, remote);
- /* let the user know what node this device is now attached to */
- info("connected: %s on %s", remote->name, path);
return 0;
-error:
- /*
- * In case of error we need to clean up any allocated buffers
- */
- if (remote->irq_urb)
- usb_free_urb(remote->irq_urb);
-
- if (remote->in_buffer)
- usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
-
- if (remote)
- kfree(remote);
+ fail3: usb_free_urb(remote->irq_urb);
+ fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+ fail1: kfree(remote);
+ input_free_device(input_dev);
return retval;
}
@@ -570,23 +541,16 @@
{
struct usb_keyspan *remote;
- /* prevent keyspan_open() from racing keyspan_disconnect() */
- lock_kernel();
-
remote = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
if (remote) { /* We have a valid driver structure so clean up everything we allocated. */
- input_unregister_device(&remote->input);
+ input_unregister_device(remote->input);
usb_kill_urb(remote->irq_urb);
usb_free_urb(remote->irq_urb);
- usb_buffer_free(interface_to_usbdev(interface), RECV_SIZE, remote->in_buffer, remote->in_dma);
+ usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
kfree(remote);
}
-
- unlock_kernel();
-
- info("USB Keyspan now disconnected");
}
/*
diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h
index 52ff27f..a424094 100644
--- a/drivers/usb/input/map_to_7segment.h
+++ b/drivers/usb/input/map_to_7segment.h
@@ -79,7 +79,7 @@
static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
{
- return c & 0x7f ? map->table[c] : -EINVAL;
+ return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
}
#define SEG7_CONVERSION_MAP(_name, _map) \
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
index ff92750..7fce526 100644
--- a/drivers/usb/input/mtouchusb.c
+++ b/drivers/usb/input/mtouchusb.c
@@ -98,7 +98,7 @@
dma_addr_t data_dma;
struct urb *irq;
struct usb_device *udev;
- struct input_dev input;
+ struct input_dev *input;
char name[128];
char phys[64];
};
@@ -135,14 +135,14 @@
goto exit;
}
- input_regs(&mtouch->input, regs);
- input_report_key(&mtouch->input, BTN_TOUCH,
+ input_regs(mtouch->input, regs);
+ input_report_key(mtouch->input, BTN_TOUCH,
MTOUCHUSB_GET_TOUCHED(mtouch->data));
- input_report_abs(&mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data));
- input_report_abs(&mtouch->input, ABS_Y,
+ input_report_abs(mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data));
+ input_report_abs(mtouch->input, ABS_Y,
(raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC)
- MTOUCHUSB_GET_YC(mtouch->data));
- input_sync(&mtouch->input);
+ input_sync(mtouch->input);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -195,10 +195,10 @@
static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct mtouch_usb *mtouch;
+ struct input_dev *input_dev;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
- char path[64];
int nRet;
dbg("%s - called", __FUNCTION__);
@@ -209,57 +209,55 @@
dbg("%s - setting endpoint", __FUNCTION__);
endpoint = &interface->endpoint[0].desc;
- if (!(mtouch = kmalloc(sizeof(struct mtouch_usb), GFP_KERNEL))) {
+ mtouch = kzalloc(sizeof(struct mtouch_usb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!mtouch || !input_dev) {
err("%s - Out of memory.", __FUNCTION__);
- return -ENOMEM;
+ goto fail1;
}
- memset(mtouch, 0, sizeof(struct mtouch_usb));
- mtouch->udev = udev;
-
dbg("%s - allocating buffers", __FUNCTION__);
- if (mtouchusb_alloc_buffers(udev, mtouch)) {
- mtouchusb_free_buffers(udev, mtouch);
- kfree(mtouch);
- return -ENOMEM;
- }
+ if (mtouchusb_alloc_buffers(udev, mtouch))
+ goto fail2;
- mtouch->input.private = mtouch;
- mtouch->input.open = mtouchusb_open;
- mtouch->input.close = mtouchusb_close;
-
- usb_make_path(udev, path, 64);
- sprintf(mtouch->phys, "%s/input0", path);
-
- mtouch->input.name = mtouch->name;
- mtouch->input.phys = mtouch->phys;
- usb_to_input_id(udev, &mtouch->input.id);
- mtouch->input.dev = &intf->dev;
-
- mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- mtouch->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- mtouch->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- /* Used to Scale Compensated Data and Flip Y */
- mtouch->input.absmin[ABS_X] = MTOUCHUSB_MIN_XC;
- mtouch->input.absmax[ABS_X] = raw_coordinates ?
- MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC;
- mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ;
- mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT;
- mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC;
- mtouch->input.absmax[ABS_Y] = raw_coordinates ?
- MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC;
- mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ;
- mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT;
+ mtouch->udev = udev;
+ mtouch->input = input_dev;
if (udev->manufacturer)
- strcat(mtouch->name, udev->manufacturer);
- if (udev->product)
- sprintf(mtouch->name, "%s %s", mtouch->name, udev->product);
+ strlcpy(mtouch->name, udev->manufacturer, sizeof(mtouch->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(mtouch->name, " ", sizeof(mtouch->name));
+ strlcat(mtouch->name, udev->product, sizeof(mtouch->name));
+ }
if (!strlen(mtouch->name))
- sprintf(mtouch->name, "USB Touchscreen %04x:%04x",
- mtouch->input.id.vendor, mtouch->input.id.product);
+ snprintf(mtouch->name, sizeof(mtouch->name),
+ "USB Touchscreen %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, mtouch->phys, sizeof(mtouch->phys));
+ strlcpy(mtouch->phys, "/input0", sizeof(mtouch->phys));
+
+ input_dev->name = mtouch->name;
+ input_dev->phys = mtouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = mtouch;
+
+ input_dev->open = mtouchusb_open;
+ input_dev->close = mtouchusb_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, MTOUCHUSB_MIN_XC,
+ raw_coordinates ? MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC,
+ MTOUCHUSB_XC_FUZZ, MTOUCHUSB_XC_FLAT);
+ input_set_abs_params(input_dev, ABS_Y, MTOUCHUSB_MIN_YC,
+ raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC,
+ MTOUCHUSB_YC_FUZZ, MTOUCHUSB_YC_FLAT);
nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_RESET,
@@ -272,9 +270,7 @@
mtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!mtouch->irq) {
dbg("%s - usb_alloc_urb failed: mtouch->irq", __FUNCTION__);
- mtouchusb_free_buffers(udev, mtouch);
- kfree(mtouch);
- return -ENOMEM;
+ goto fail2;
}
dbg("%s - usb_fill_int_urb", __FUNCTION__);
@@ -284,7 +280,7 @@
mtouchusb_irq, mtouch, endpoint->bInterval);
dbg("%s - input_register_device", __FUNCTION__);
- input_register_device(&mtouch->input);
+ input_register_device(mtouch->input);
nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_ASYNC_REPORT,
@@ -293,10 +289,13 @@
dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
__FUNCTION__, nRet);
- printk(KERN_INFO "input: %s on %s\n", mtouch->name, path);
usb_set_intfdata(intf, mtouch);
-
return 0;
+
+fail2: mtouchusb_free_buffers(udev, mtouch);
+fail1: input_free_device(input_dev);
+ kfree(mtouch);
+ return -ENOMEM;
}
static void mtouchusb_disconnect(struct usb_interface *intf)
@@ -308,7 +307,7 @@
if (mtouch) {
dbg("%s - mtouch is initialized, cleaning up", __FUNCTION__);
usb_kill_urb(mtouch->irq);
- input_unregister_device(&mtouch->input);
+ input_unregister_device(mtouch->input);
usb_free_urb(mtouch->irq);
mtouchusb_free_buffers(interface_to_usbdev(intf), mtouch);
kfree(mtouch);
diff --git a/drivers/usb/input/pid.c b/drivers/usb/input/pid.c
index acc71ec..dca5ee9 100644
--- a/drivers/usb/input/pid.c
+++ b/drivers/usb/input/pid.c
@@ -198,7 +198,7 @@
}
effect->id = id;
- dev_dbg(&pid_private->hid->dev->dev, "effect ID is %d\n.", id);
+ dev_dbg(&pid_private->hid->dev->dev, "effect ID is %d.\n", id);
pid_private->effects[id].owner = current->pid;
pid_private->effects[id].flags = (1 << FF_PID_FLAGS_USED);
spin_unlock_irqrestore(&pid_private->lock, flags);
@@ -262,6 +262,7 @@
{
struct hid_ff_pid *private;
struct hid_input *hidinput = list_entry(&hid->inputs, struct hid_input, list);
+ struct input_dev *input_dev = hidinput->input;
private = hid->ff_private = kzalloc(sizeof(struct hid_ff_pid), GFP_KERNEL);
if (!private)
@@ -281,11 +282,12 @@
usb_fill_control_urb(private->urbffout, hid->dev, 0,
(void *)&private->ffcr, private->ctrl_buffer, 8,
hid_pid_ctrl_out, hid);
- hidinput->input.upload_effect = hid_pid_upload_effect;
- hidinput->input.flush = hid_pid_flush;
- hidinput->input.ff_effects_max = 8; // A random default
- set_bit(EV_FF, hidinput->input.evbit);
- set_bit(EV_FF_STATUS, hidinput->input.evbit);
+
+ input_dev->upload_effect = hid_pid_upload_effect;
+ input_dev->flush = hid_pid_flush;
+ input_dev->ff_effects_max = 8; // A random default
+ set_bit(EV_FF, input_dev->evbit);
+ set_bit(EV_FF_STATUS, input_dev->evbit);
spin_lock_init(&private->lock);
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
index ad4afe7..b747623 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/usb/input/powermate.c
@@ -68,7 +68,7 @@
struct usb_ctrlrequest *configcr;
dma_addr_t configcr_dma;
struct usb_device *udev;
- struct input_dev input;
+ struct input_dev *input;
spinlock_t lock;
int static_brightness;
int pulse_speed;
@@ -106,10 +106,10 @@
}
/* handle updates to device state */
- input_regs(&pm->input, regs);
- input_report_key(&pm->input, BTN_0, pm->data[0] & 0x01);
- input_report_rel(&pm->input, REL_DIAL, pm->data[1]);
- input_sync(&pm->input);
+ input_regs(pm->input, regs);
+ input_report_key(pm->input, BTN_0, pm->data[0] & 0x01);
+ input_report_rel(pm->input, REL_DIAL, pm->data[1]);
+ input_sync(pm->input);
exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
@@ -153,10 +153,10 @@
Only values of 'arg' quite close to 255 are particularly useful/spectacular.
*/
- if (pm->pulse_speed < 255){
+ if (pm->pulse_speed < 255) {
op = 0; // divide
arg = 255 - pm->pulse_speed;
- } else if (pm->pulse_speed > 255){
+ } else if (pm->pulse_speed > 255) {
op = 2; // multiply
arg = pm->pulse_speed - 255;
} else {
@@ -166,11 +166,11 @@
pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE );
pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op );
pm->requires_update &= ~UPDATE_PULSE_MODE;
- }else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS){
+ } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) {
pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS );
pm->configcr->wIndex = cpu_to_le16( pm->static_brightness );
pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS;
- }else{
+ } else {
printk(KERN_ERR "powermate: unknown update required");
pm->requires_update = 0; /* fudge the bug */
return;
@@ -228,19 +228,19 @@
spin_lock_irqsave(&pm->lock, flags);
/* mark state updates which are required */
- if (static_brightness != pm->static_brightness){
+ if (static_brightness != pm->static_brightness) {
pm->static_brightness = static_brightness;
pm->requires_update |= UPDATE_STATIC_BRIGHTNESS;
}
- if (pulse_asleep != pm->pulse_asleep){
+ if (pulse_asleep != pm->pulse_asleep) {
pm->pulse_asleep = pulse_asleep;
pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS);
}
- if (pulse_awake != pm->pulse_awake){
+ if (pulse_awake != pm->pulse_awake) {
pm->pulse_awake = pulse_awake;
pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS);
}
- if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table){
+ if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) {
pm->pulse_speed = pulse_speed;
pm->pulse_table = pulse_table;
pm->requires_update |= UPDATE_PULSE_MODE;
@@ -283,6 +283,7 @@
SLAB_ATOMIC, &pm->data_dma);
if (!pm->data)
return -1;
+
pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)),
SLAB_ATOMIC, &pm->configcr_dma);
if (!pm->configcr)
@@ -308,8 +309,9 @@
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct powermate_device *pm;
+ struct input_dev *input_dev;
int pipe, maxp;
- char path[64];
+ int err = -ENOMEM;
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
@@ -323,42 +325,61 @@
0, interface->desc.bInterfaceNumber, NULL, 0,
USB_CTRL_SET_TIMEOUT);
- if (!(pm = kmalloc(sizeof(struct powermate_device), GFP_KERNEL)))
- return -ENOMEM;
+ pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!pm || !input_dev)
+ goto fail1;
- memset(pm, 0, sizeof(struct powermate_device));
- pm->udev = udev;
-
- if (powermate_alloc_buffers(udev, pm)) {
- powermate_free_buffers(udev, pm);
- kfree(pm);
- return -ENOMEM;
- }
+ if (powermate_alloc_buffers(udev, pm))
+ goto fail2;
pm->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!pm->irq) {
- powermate_free_buffers(udev, pm);
- kfree(pm);
- return -ENOMEM;
- }
+ if (!pm->irq)
+ goto fail2;
pm->config = usb_alloc_urb(0, GFP_KERNEL);
- if (!pm->config) {
- usb_free_urb(pm->irq);
- powermate_free_buffers(udev, pm);
- kfree(pm);
- return -ENOMEM;
- }
+ if (!pm->config)
+ goto fail3;
+
+ pm->udev = udev;
+ pm->input = input_dev;
+
+ usb_make_path(udev, pm->phys, sizeof(pm->phys));
+ strlcpy(pm->phys, "/input0", sizeof(pm->phys));
spin_lock_init(&pm->lock);
- init_input_dev(&pm->input);
+
+ switch (le16_to_cpu(udev->descriptor.idProduct)) {
+ case POWERMATE_PRODUCT_NEW:
+ input_dev->name = pm_name_powermate;
+ break;
+ case POWERMATE_PRODUCT_OLD:
+ input_dev->name = pm_name_soundknob;
+ break;
+ default:
+ input_dev->name = pm_name_soundknob;
+ printk(KERN_WARNING "powermate: unknown product id %04x\n",
+ le16_to_cpu(udev->descriptor.idProduct));
+ }
+
+ input_dev->phys = pm->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = pm;
+
+ input_dev->event = powermate_input_event;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC);
+ input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0);
+ input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
+ input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
/* get a handle to the interrupt data pipe */
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- if(maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX){
- printk("powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
+ if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) {
+ printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp);
maxp = POWERMATE_PAYLOAD_SIZE_MAX;
}
@@ -371,35 +392,11 @@
/* register our interrupt URB with the USB system */
if (usb_submit_urb(pm->irq, GFP_KERNEL)) {
- powermate_free_buffers(udev, pm);
- kfree(pm);
- return -EIO; /* failure */
+ err = -EIO;
+ goto fail4;
}
- switch (le16_to_cpu(udev->descriptor.idProduct)) {
- case POWERMATE_PRODUCT_NEW: pm->input.name = pm_name_powermate; break;
- case POWERMATE_PRODUCT_OLD: pm->input.name = pm_name_soundknob; break;
- default:
- pm->input.name = pm_name_soundknob;
- printk(KERN_WARNING "powermate: unknown product id %04x\n",
- le16_to_cpu(udev->descriptor.idProduct));
- }
-
- pm->input.private = pm;
- pm->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC);
- pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
- pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
- pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
- usb_to_input_id(udev, &pm->input.id);
- pm->input.event = powermate_input_event;
- pm->input.dev = &intf->dev;
- pm->input.phys = pm->phys;
-
- input_register_device(&pm->input);
-
- usb_make_path(udev, path, 64);
- snprintf(pm->phys, 64, "%s/input0", path);
- printk(KERN_INFO "input: %s on %s\n", pm->input.name, pm->input.phys);
+ input_register_device(pm->input);
/* force an update of everything */
pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS;
@@ -407,6 +404,13 @@
usb_set_intfdata(intf, pm);
return 0;
+
+fail4: usb_free_urb(pm->config);
+fail3: usb_free_urb(pm->irq);
+fail2: powermate_free_buffers(udev, pm);
+fail1: input_free_device(input_dev);
+ kfree(pm);
+ return err;
}
/* Called when a USB device we've accepted ownership of is removed */
@@ -418,7 +422,7 @@
if (pm) {
pm->requires_update = 0;
usb_kill_urb(pm->irq);
- input_unregister_device(&pm->input);
+ input_unregister_device(pm->input);
usb_free_urb(pm->irq);
usb_free_urb(pm->config);
powermate_free_buffers(interface_to_usbdev(intf), pm);
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 4276c24..0043e6e 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -68,14 +68,16 @@
dma_addr_t data_dma;
struct urb *irq;
struct usb_device *udev;
- struct input_dev input;
+ struct input_dev *input;
char name[128];
char phys[64];
};
static struct usb_device_id touchkit_devices[] = {
{USB_DEVICE(0x3823, 0x0001)},
+ {USB_DEVICE(0x0123, 0x0001)},
{USB_DEVICE(0x0eef, 0x0001)},
+ {USB_DEVICE(0x0eef, 0x0002)},
{}
};
@@ -115,12 +117,12 @@
y = TOUCHKIT_GET_Y(touchkit->data);
}
- input_regs(&touchkit->input, regs);
- input_report_key(&touchkit->input, BTN_TOUCH,
+ input_regs(touchkit->input, regs);
+ input_report_key(touchkit->input, BTN_TOUCH,
TOUCHKIT_GET_TOUCHED(touchkit->data));
- input_report_abs(&touchkit->input, ABS_X, x);
- input_report_abs(&touchkit->input, ABS_Y, y);
- input_sync(&touchkit->input);
+ input_report_abs(touchkit->input, ABS_X, x);
+ input_report_abs(touchkit->input, ABS_Y, y);
+ input_sync(touchkit->input);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -171,87 +173,81 @@
static int touchkit_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- int ret;
struct touchkit_usb *touchkit;
+ struct input_dev *input_dev;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
- char path[64];
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- touchkit = kmalloc(sizeof(struct touchkit_usb), GFP_KERNEL);
- if (!touchkit)
- return -ENOMEM;
-
- memset(touchkit, 0, sizeof(struct touchkit_usb));
- touchkit->udev = udev;
-
- if (touchkit_alloc_buffers(udev, touchkit)) {
- ret = -ENOMEM;
+ touchkit = kzalloc(sizeof(struct touchkit_usb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!touchkit || !input_dev)
goto out_free;
- }
- touchkit->input.private = touchkit;
- touchkit->input.open = touchkit_open;
- touchkit->input.close = touchkit_close;
-
- usb_make_path(udev, path, 64);
- sprintf(touchkit->phys, "%s/input0", path);
-
- touchkit->input.name = touchkit->name;
- touchkit->input.phys = touchkit->phys;
- usb_to_input_id(udev, &touchkit->input.id);
- touchkit->input.dev = &intf->dev;
-
- touchkit->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- touchkit->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- touchkit->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- /* Used to Scale Compensated Data */
- touchkit->input.absmin[ABS_X] = TOUCHKIT_MIN_XC;
- touchkit->input.absmax[ABS_X] = TOUCHKIT_MAX_XC;
- touchkit->input.absfuzz[ABS_X] = TOUCHKIT_XC_FUZZ;
- touchkit->input.absflat[ABS_X] = TOUCHKIT_XC_FLAT;
- touchkit->input.absmin[ABS_Y] = TOUCHKIT_MIN_YC;
- touchkit->input.absmax[ABS_Y] = TOUCHKIT_MAX_YC;
- touchkit->input.absfuzz[ABS_Y] = TOUCHKIT_YC_FUZZ;
- touchkit->input.absflat[ABS_Y] = TOUCHKIT_YC_FLAT;
-
- if (udev->manufacturer)
- strcat(touchkit->name, udev->manufacturer);
- if (udev->product)
- sprintf(touchkit->name, "%s %s", touchkit->name, udev->product);
-
- if (!strlen(touchkit->name))
- sprintf(touchkit->name, "USB Touchscreen %04x:%04x",
- touchkit->input.id.vendor, touchkit->input.id.product);
+ if (touchkit_alloc_buffers(udev, touchkit))
+ goto out_free;
touchkit->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!touchkit->irq) {
dbg("%s - usb_alloc_urb failed: touchkit->irq", __FUNCTION__);
- ret = -ENOMEM;
goto out_free_buffers;
}
+ touchkit->udev = udev;
+ touchkit->input = input_dev;
+
+ if (udev->manufacturer)
+ strlcpy(touchkit->name, udev->manufacturer, sizeof(touchkit->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(touchkit->name, " ", sizeof(touchkit->name));
+ strlcat(touchkit->name, udev->product, sizeof(touchkit->name));
+ }
+
+ if (!strlen(touchkit->name))
+ snprintf(touchkit->name, sizeof(touchkit->name),
+ "USB Touchscreen %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, touchkit->phys, sizeof(touchkit->phys));
+ strlcpy(touchkit->phys, "/input0", sizeof(touchkit->phys));
+
+ input_dev->name = touchkit->name;
+ input_dev->phys = touchkit->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = touchkit;
+ input_dev->open = touchkit_open;
+ input_dev->close = touchkit_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, TOUCHKIT_MIN_XC, TOUCHKIT_MAX_XC,
+ TOUCHKIT_XC_FUZZ, TOUCHKIT_XC_FLAT);
+ input_set_abs_params(input_dev, ABS_Y, TOUCHKIT_MIN_YC, TOUCHKIT_MAX_YC,
+ TOUCHKIT_YC_FUZZ, TOUCHKIT_YC_FLAT);
+
usb_fill_int_urb(touchkit->irq, touchkit->udev,
- usb_rcvintpipe(touchkit->udev, 0x81),
- touchkit->data, TOUCHKIT_REPORT_DATA_SIZE,
- touchkit_irq, touchkit, endpoint->bInterval);
+ usb_rcvintpipe(touchkit->udev, 0x81),
+ touchkit->data, TOUCHKIT_REPORT_DATA_SIZE,
+ touchkit_irq, touchkit, endpoint->bInterval);
- input_register_device(&touchkit->input);
+ input_register_device(touchkit->input);
- printk(KERN_INFO "input: %s on %s\n", touchkit->name, path);
usb_set_intfdata(intf, touchkit);
-
return 0;
out_free_buffers:
touchkit_free_buffers(udev, touchkit);
out_free:
+ input_free_device(input_dev);
kfree(touchkit);
- return ret;
+ return -ENOMEM;
}
static void touchkit_disconnect(struct usb_interface *intf)
@@ -265,8 +261,8 @@
dbg("%s - touchkit is initialized, cleaning up", __FUNCTION__);
usb_set_intfdata(intf, NULL);
- input_unregister_device(&touchkit->input);
usb_kill_urb(touchkit->irq);
+ input_unregister_device(touchkit->input);
usb_free_urb(touchkit->irq);
touchkit_free_buffers(interface_to_usbdev(intf), touchkit);
kfree(touchkit);
diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c
index 28987f1..226b6f9 100644
--- a/drivers/usb/input/usbkbd.c
+++ b/drivers/usb/input/usbkbd.c
@@ -66,7 +66,7 @@
};
struct usb_kbd {
- struct input_dev dev;
+ struct input_dev *dev;
struct usb_device *usbdev;
unsigned char old[8];
struct urb *irq, *led;
@@ -99,29 +99,29 @@
goto resubmit;
}
- input_regs(&kbd->dev, regs);
+ input_regs(kbd->dev, regs);
for (i = 0; i < 8; i++)
- input_report_key(&kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
+ input_report_key(kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
for (i = 2; i < 8; i++) {
if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == kbd->new + 8) {
if (usb_kbd_keycode[kbd->old[i]])
- input_report_key(&kbd->dev, usb_kbd_keycode[kbd->old[i]], 0);
+ input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0);
else
info("Unknown key (scancode %#x) released.", kbd->old[i]);
}
if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) {
if (usb_kbd_keycode[kbd->new[i]])
- input_report_key(&kbd->dev, usb_kbd_keycode[kbd->new[i]], 1);
+ input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1);
else
info("Unknown key (scancode %#x) pressed.", kbd->new[i]);
}
}
- input_sync(&kbd->dev);
+ input_sync(kbd->dev);
memcpy(kbd->old, kbd->new, 8);
@@ -227,12 +227,12 @@
static int usb_kbd_probe(struct usb_interface *iface,
const struct usb_device_id *id)
{
- struct usb_device * dev = interface_to_usbdev(iface);
+ struct usb_device *dev = interface_to_usbdev(iface);
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_kbd *kbd;
+ struct input_dev *input_dev;
int i, pipe, maxp;
- char path[64];
interface = iface->cur_altsetting;
@@ -240,37 +240,59 @@
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
+ if (!(endpoint->bEndpointAddress & USB_DIR_IN))
return -ENODEV;
- if ((endpoint->bmAttributes & 3) != 3)
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
return -ENODEV;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
- if (!(kbd = kmalloc(sizeof(struct usb_kbd), GFP_KERNEL)))
- return -ENOMEM;
- memset(kbd, 0, sizeof(struct usb_kbd));
+ kbd = kzalloc(sizeof(struct usb_kbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!kbd || !input_dev)
+ goto fail1;
- if (usb_kbd_alloc_mem(dev, kbd)) {
- usb_kbd_free_mem(dev, kbd);
- kfree(kbd);
- return -ENOMEM;
- }
+ if (usb_kbd_alloc_mem(dev, kbd))
+ goto fail2;
kbd->usbdev = dev;
+ kbd->dev = input_dev;
- kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
- kbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA);
+ if (dev->manufacturer)
+ strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name));
+
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(kbd->name, " ", sizeof(kbd->name));
+ strlcat(kbd->name, dev->product, sizeof(kbd->name));
+ }
+
+ if (!strlen(kbd->name))
+ snprintf(kbd->name, sizeof(kbd->name),
+ "USB HIDBP Keyboard %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ usb_make_path(dev, kbd->phys, sizeof(kbd->phys));
+ strlcpy(kbd->phys, "/input0", sizeof(kbd->phys));
+
+ input_dev->name = kbd->name;
+ input_dev->phys = kbd->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &iface->dev;
+ input_dev->private = kbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+ input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA);
for (i = 0; i < 255; i++)
- set_bit(usb_kbd_keycode[i], kbd->dev.keybit);
- clear_bit(0, kbd->dev.keybit);
+ set_bit(usb_kbd_keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
- kbd->dev.private = kbd;
- kbd->dev.event = usb_kbd_event;
- kbd->dev.open = usb_kbd_open;
- kbd->dev.close = usb_kbd_close;
+ input_dev->event = usb_kbd_event;
+ input_dev->open = usb_kbd_open;
+ input_dev->close = usb_kbd_close;
usb_fill_int_urb(kbd->irq, dev, pipe,
kbd->new, (maxp > 8 ? 8 : maxp),
@@ -284,37 +306,22 @@
kbd->cr->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
kbd->cr->wLength = cpu_to_le16(1);
- usb_make_path(dev, path, 64);
- sprintf(kbd->phys, "%s/input0", path);
-
- kbd->dev.name = kbd->name;
- kbd->dev.phys = kbd->phys;
- usb_to_input_id(dev, &kbd->dev.id);
- kbd->dev.dev = &iface->dev;
-
- if (dev->manufacturer)
- strcat(kbd->name, dev->manufacturer);
- if (dev->product)
- sprintf(kbd->name, "%s %s", kbd->name, dev->product);
-
- if (!strlen(kbd->name))
- sprintf(kbd->name, "USB HIDBP Keyboard %04x:%04x",
- kbd->dev.id.vendor, kbd->dev.id.product);
-
usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0),
(void *) kbd->cr, kbd->leds, 1,
usb_kbd_led, kbd);
kbd->led->setup_dma = kbd->cr_dma;
kbd->led->transfer_dma = kbd->leds_dma;
- kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP
- | URB_NO_SETUP_DMA_MAP);
+ kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
- input_register_device(&kbd->dev);
-
- printk(KERN_INFO "input: %s on %s\n", kbd->name, path);
+ input_register_device(kbd->dev);
usb_set_intfdata(iface, kbd);
return 0;
+
+fail2: usb_kbd_free_mem(dev, kbd);
+fail1: input_free_device(input_dev);
+ kfree(kbd);
+ return -ENOMEM;
}
static void usb_kbd_disconnect(struct usb_interface *intf)
@@ -324,7 +331,7 @@
usb_set_intfdata(intf, NULL);
if (kbd) {
usb_kill_urb(kbd->irq);
- input_unregister_device(&kbd->dev);
+ input_unregister_device(kbd->dev);
usb_kbd_free_mem(interface_to_usbdev(intf), kbd);
kfree(kbd);
}
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
index 4104dec..230f6b1 100644
--- a/drivers/usb/input/usbmouse.c
+++ b/drivers/usb/input/usbmouse.c
@@ -50,7 +50,7 @@
char name[128];
char phys[64];
struct usb_device *usbdev;
- struct input_dev dev;
+ struct input_dev *dev;
struct urb *irq;
signed char *data;
@@ -61,7 +61,7 @@
{
struct usb_mouse *mouse = urb->context;
signed char *data = mouse->data;
- struct input_dev *dev = &mouse->dev;
+ struct input_dev *dev = mouse->dev;
int status;
switch (urb->status) {
@@ -115,14 +115,14 @@
usb_kill_urb(mouse->irq);
}
-static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_id * id)
+static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
- struct usb_device * dev = interface_to_usbdev(intf);
+ struct usb_device *dev = interface_to_usbdev(intf);
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_mouse *mouse;
+ struct input_dev *input_dev;
int pipe, maxp;
- char path[64];
interface = intf->cur_altsetting;
@@ -130,59 +130,62 @@
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
+ if (!(endpoint->bEndpointAddress & USB_DIR_IN))
return -ENODEV;
- if ((endpoint->bmAttributes & 3) != 3)
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
return -ENODEV;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
- if (!(mouse = kmalloc(sizeof(struct usb_mouse), GFP_KERNEL)))
- return -ENOMEM;
- memset(mouse, 0, sizeof(struct usb_mouse));
+ mouse = kzalloc(sizeof(struct usb_mouse), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!mouse || !input_dev)
+ goto fail1;
mouse->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &mouse->data_dma);
- if (!mouse->data) {
- kfree(mouse);
- return -ENOMEM;
- }
+ if (!mouse->data)
+ goto fail1;
mouse->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!mouse->irq) {
- usb_buffer_free(dev, 8, mouse->data, mouse->data_dma);
- kfree(mouse);
- return -ENODEV;
- }
+ if (!mouse->irq)
+ goto fail2;
mouse->usbdev = dev;
-
- mouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- mouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
- mouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- mouse->dev.keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA);
- mouse->dev.relbit[0] |= BIT(REL_WHEEL);
-
- mouse->dev.private = mouse;
- mouse->dev.open = usb_mouse_open;
- mouse->dev.close = usb_mouse_close;
-
- usb_make_path(dev, path, 64);
- sprintf(mouse->phys, "%s/input0", path);
-
- mouse->dev.name = mouse->name;
- mouse->dev.phys = mouse->phys;
- usb_to_input_id(dev, &mouse->dev.id);
- mouse->dev.dev = &intf->dev;
+ mouse->dev = input_dev;
if (dev->manufacturer)
- strcat(mouse->name, dev->manufacturer);
- if (dev->product)
- sprintf(mouse->name, "%s %s", mouse->name, dev->product);
+ strlcpy(mouse->name, dev->manufacturer, sizeof(mouse->name));
+
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(mouse->name, " ", sizeof(mouse->name));
+ strlcat(mouse->name, dev->product, sizeof(mouse->name));
+ }
if (!strlen(mouse->name))
- sprintf(mouse->name, "USB HIDBP Mouse %04x:%04x",
- mouse->dev.id.vendor, mouse->dev.id.product);
+ snprintf(mouse->name, sizeof(mouse->name),
+ "USB HIDBP Mouse %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ usb_make_path(dev, mouse->phys, sizeof(mouse->phys));
+ strlcat(mouse->phys, "/input0", sizeof(mouse->phys));
+
+ input_dev->name = mouse->name;
+ input_dev->phys = mouse->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA);
+ input_dev->relbit[0] |= BIT(REL_WHEEL);
+
+ input_dev->private = mouse;
+ input_dev->open = usb_mouse_open;
+ input_dev->close = usb_mouse_close;
usb_fill_int_urb(mouse->irq, dev, pipe, mouse->data,
(maxp > 8 ? 8 : maxp),
@@ -190,11 +193,15 @@
mouse->irq->transfer_dma = mouse->data_dma;
mouse->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(&mouse->dev);
- printk(KERN_INFO "input: %s on %s\n", mouse->name, path);
+ input_register_device(mouse->dev);
usb_set_intfdata(intf, mouse);
return 0;
+
+fail2: usb_buffer_free(dev, 8, mouse->data, mouse->data_dma);
+fail1: input_free_device(input_dev);
+ kfree(mouse);
+ return -ENOMEM;
}
static void usb_mouse_disconnect(struct usb_interface *intf)
@@ -204,7 +211,7 @@
usb_set_intfdata(intf, NULL);
if (mouse) {
usb_kill_urb(mouse->irq);
- input_unregister_device(&mouse->dev);
+ input_unregister_device(mouse->dev);
usb_free_urb(mouse->irq);
usb_buffer_free(interface_to_usbdev(intf), 8, mouse->data, mouse->data_dma);
kfree(mouse);
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
index 3b266af..ea0f757 100644
--- a/drivers/usb/input/wacom.c
+++ b/drivers/usb/input/wacom.c
@@ -111,7 +111,7 @@
struct wacom {
signed char *data;
dma_addr_t data_dma;
- struct input_dev dev;
+ struct input_dev *dev;
struct usb_device *usbdev;
struct urb *irq;
struct wacom_features *features;
@@ -135,7 +135,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int prox, pressure;
int retval;
@@ -225,7 +225,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int retval;
switch (urb->status) {
@@ -275,7 +275,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int retval;
switch (urb->status) {
@@ -318,7 +318,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int x, y;
int retval;
@@ -397,7 +397,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int idx;
/* tool number */
@@ -479,7 +479,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
unsigned int t;
/* general pen packet */
@@ -509,7 +509,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
unsigned int t;
int idx;
int retval;
@@ -738,95 +738,83 @@
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *endpoint;
- char rep_data[2] = {0x02, 0x02};
struct wacom *wacom;
- char path[64];
+ struct input_dev *input_dev;
+ char rep_data[2] = {0x02, 0x02};
- if (!(wacom = kmalloc(sizeof(struct wacom), GFP_KERNEL)))
- return -ENOMEM;
- memset(wacom, 0, sizeof(struct wacom));
+ wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!wacom || !input_dev)
+ goto fail1;
wacom->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
- if (!wacom->data) {
- kfree(wacom);
- return -ENOMEM;
- }
+ if (!wacom->data)
+ goto fail1;
wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!wacom->irq) {
- usb_buffer_free(dev, 10, wacom->data, wacom->data_dma);
- kfree(wacom);
- return -ENOMEM;
- }
+ if (!wacom->irq)
+ goto fail2;
+
+ wacom->usbdev = dev;
+ wacom->dev = input_dev;
+ usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
+ strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
wacom->features = wacom_features + (id - wacom_ids);
+ if (wacom->features->pktlen > 10)
+ BUG();
- wacom->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
- wacom->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
+ input_dev->name = wacom->features->name;
+ usb_to_input_id(dev, &input_dev->id);
+
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = wacom;
+ input_dev->open = wacom_open;
+ input_dev->close = wacom_close;
+
+ input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
+ input_set_abs_params(input_dev, ABS_X, 0, wacom->features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);
switch (wacom->features->type) {
case GRAPHIRE:
- wacom->dev.evbit[0] |= BIT(EV_REL);
- wacom->dev.relbit[0] |= BIT(REL_WHEEL);
- wacom->dev.absbit[0] |= BIT(ABS_DISTANCE);
- wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
+ input_dev->evbit[0] |= BIT(EV_REL);
+ input_dev->relbit[0] |= BIT(REL_WHEEL);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0);
break;
case INTUOS3:
case CINTIQ:
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
- wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
- wacom->dev.absbit[0] |= BIT(ABS_RX) | BIT(ABS_RY);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
+ input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0);
/* fall through */
case INTUOS:
- wacom->dev.evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
- wacom->dev.mscbit[0] |= BIT(MSC_SERIAL);
- wacom->dev.relbit[0] |= BIT(REL_WHEEL);
- wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH)
+ input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
+ input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+ input_dev->relbit[0] |= BIT(REL_WHEEL);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH)
| BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
- wacom->dev.absbit[0] |= BIT(ABS_DISTANCE) | BIT(ABS_WHEEL) | BIT(ABS_TILT_X) | BIT(ABS_TILT_Y) | BIT(ABS_RZ) | BIT(ABS_THROTTLE);
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+ input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
+ input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
break;
case PL:
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
break;
}
- wacom->dev.absmax[ABS_X] = wacom->features->x_max;
- wacom->dev.absmax[ABS_Y] = wacom->features->y_max;
- wacom->dev.absmax[ABS_PRESSURE] = wacom->features->pressure_max;
- wacom->dev.absmax[ABS_DISTANCE] = wacom->features->distance_max;
- wacom->dev.absmax[ABS_TILT_X] = 127;
- wacom->dev.absmax[ABS_TILT_Y] = 127;
- wacom->dev.absmax[ABS_WHEEL] = 1023;
-
- wacom->dev.absmax[ABS_RX] = 4097;
- wacom->dev.absmax[ABS_RY] = 4097;
- wacom->dev.absmin[ABS_RZ] = -900;
- wacom->dev.absmax[ABS_RZ] = 899;
- wacom->dev.absmin[ABS_THROTTLE] = -1023;
- wacom->dev.absmax[ABS_THROTTLE] = 1023;
-
- wacom->dev.absfuzz[ABS_X] = 4;
- wacom->dev.absfuzz[ABS_Y] = 4;
-
- wacom->dev.private = wacom;
- wacom->dev.open = wacom_open;
- wacom->dev.close = wacom_close;
-
- usb_make_path(dev, path, 64);
- sprintf(wacom->phys, "%s/input0", path);
-
- wacom->dev.name = wacom->features->name;
- wacom->dev.phys = wacom->phys;
- usb_to_input_id(dev, &wacom->dev.id);
- wacom->dev.dev = &intf->dev;
- wacom->usbdev = dev;
-
endpoint = &intf->cur_altsetting->endpoint[0].desc;
if (wacom->features->pktlen > 10)
@@ -839,18 +827,20 @@
wacom->irq->transfer_dma = wacom->data_dma;
wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(&wacom->dev);
+ input_register_device(wacom->dev);
/* ask the tablet to report tablet data */
usb_set_report(intf, 3, 2, rep_data, 2);
/* repeat once (not sure why the first call often fails) */
usb_set_report(intf, 3, 2, rep_data, 2);
- printk(KERN_INFO "input: %s on %s\n", wacom->features->name, path);
-
usb_set_intfdata(intf, wacom);
-
return 0;
+
+fail2: usb_buffer_free(dev, 10, wacom->data, wacom->data_dma);
+fail1: input_free_device(input_dev);
+ kfree(wacom);
+ return -ENOMEM;
}
static void wacom_disconnect(struct usb_interface *intf)
@@ -860,7 +850,7 @@
usb_set_intfdata(intf, NULL);
if (wacom) {
usb_kill_urb(wacom->irq);
- input_unregister_device(&wacom->dev);
+ input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, wacom->data, wacom->data_dma);
kfree(wacom);
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index 18125e0..43112f0 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -103,7 +103,7 @@
MODULE_DEVICE_TABLE (usb, xpad_table);
struct usb_xpad {
- struct input_dev dev; /* input device interface */
+ struct input_dev *dev; /* input device interface */
struct usb_device *udev; /* usb device */
struct urb *irq_in; /* urb for interrupt in report */
@@ -125,7 +125,7 @@
static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data, struct pt_regs *regs)
{
- struct input_dev *dev = &xpad->dev;
+ struct input_dev *dev = xpad->dev;
input_regs(dev, regs);
@@ -214,9 +214,9 @@
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev (intf);
- struct usb_xpad *xpad = NULL;
+ struct usb_xpad *xpad;
+ struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
- char path[64];
int i;
for (i = 0; xpad_device[i].idVendor; i++) {
@@ -225,29 +225,63 @@
break;
}
- if ((xpad = kmalloc (sizeof(struct usb_xpad), GFP_KERNEL)) == NULL) {
- err("cannot allocate memory for new pad");
- return -ENOMEM;
- }
- memset(xpad, 0, sizeof(struct usb_xpad));
+ xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!xpad || !input_dev)
+ goto fail1;
xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
SLAB_ATOMIC, &xpad->idata_dma);
- if (!xpad->idata) {
- kfree(xpad);
- return -ENOMEM;
- }
+ if (!xpad->idata)
+ goto fail1;
xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
- if (!xpad->irq_in) {
- err("cannot allocate memory for new pad irq urb");
- usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
- kfree(xpad);
- return -ENOMEM;
- }
+ if (!xpad->irq_in)
+ goto fail2;
+
+ xpad->udev = udev;
+ xpad->dev = input_dev;
+ usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+ strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
+
+ input_dev->name = xpad_device[i].name;
+ input_dev->phys = xpad->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = xpad;
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; xpad_btn[i] >= 0; i++)
+ set_bit(xpad_btn[i], input_dev->keybit);
+
+ for (i = 0; xpad_abs[i] >= 0; i++) {
+
+ signed short t = xpad_abs[i];
+
+ set_bit(t, input_dev->absbit);
+
+ switch (t) {
+ case ABS_X:
+ case ABS_Y:
+ case ABS_RX:
+ case ABS_RY: /* the two sticks */
+ input_set_abs_params(input_dev, t, -32768, 32767, 16, 128);
+ break;
+ case ABS_Z:
+ case ABS_RZ: /* the triggers */
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
+ break;
+ case ABS_HAT0X:
+ case ABS_HAT0Y: /* the d-pad */
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
+ break;
+ }
+ }
ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
-
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
@@ -255,59 +289,16 @@
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- xpad->udev = udev;
-
- usb_to_input_id(udev, &xpad->dev.id);
- xpad->dev.dev = &intf->dev;
- xpad->dev.private = xpad;
- xpad->dev.name = xpad_device[i].name;
- xpad->dev.phys = xpad->phys;
- xpad->dev.open = xpad_open;
- xpad->dev.close = xpad_close;
-
- usb_make_path(udev, path, 64);
- snprintf(xpad->phys, 64, "%s/input0", path);
-
- xpad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (i = 0; xpad_btn[i] >= 0; i++)
- set_bit(xpad_btn[i], xpad->dev.keybit);
-
- for (i = 0; xpad_abs[i] >= 0; i++) {
-
- signed short t = xpad_abs[i];
-
- set_bit(t, xpad->dev.absbit);
-
- switch (t) {
- case ABS_X:
- case ABS_Y:
- case ABS_RX:
- case ABS_RY: /* the two sticks */
- xpad->dev.absmax[t] = 32767;
- xpad->dev.absmin[t] = -32768;
- xpad->dev.absflat[t] = 128;
- xpad->dev.absfuzz[t] = 16;
- break;
- case ABS_Z:
- case ABS_RZ: /* the triggers */
- xpad->dev.absmax[t] = 255;
- xpad->dev.absmin[t] = 0;
- break;
- case ABS_HAT0X:
- case ABS_HAT0Y: /* the d-pad */
- xpad->dev.absmax[t] = 1;
- xpad->dev.absmin[t] = -1;
- break;
- }
- }
-
- input_register_device(&xpad->dev);
-
- printk(KERN_INFO "input: %s on %s", xpad->dev.name, path);
+ input_register_device(xpad->dev);
usb_set_intfdata(intf, xpad);
return 0;
+
+fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+fail1: input_free_device(input_dev);
+ kfree(xpad);
+ return -ENOMEM;
+
}
static void xpad_disconnect(struct usb_interface *intf)
@@ -317,7 +308,7 @@
usb_set_intfdata(intf, NULL);
if (xpad) {
usb_kill_urb(xpad->irq_in);
- input_unregister_device(&xpad->dev);
+ input_unregister_device(xpad->dev);
usb_free_urb(xpad->irq_in);
usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
kfree(xpad);
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 58a176e..f526aeb 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -54,6 +54,7 @@
#include <linux/module.h>
#include <linux/rwsem.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#include "map_to_7segment.h"
#include "yealink.h"
@@ -101,12 +102,12 @@
};
struct yealink_dev {
- struct input_dev idev; /* input device */
+ struct input_dev *idev; /* input device */
struct usb_device *udev; /* usb device */
/* irq input channel */
struct yld_ctl_packet *irq_data;
- dma_addr_t irq_dma;
+ dma_addr_t irq_dma;
struct urb *urb_irq;
/* control output channel */
@@ -237,7 +238,7 @@
*/
static void report_key(struct yealink_dev *yld, int key, struct pt_regs *regs)
{
- struct input_dev *idev = &yld->idev;
+ struct input_dev *idev = yld->idev;
input_regs(idev, regs);
if (yld->key_code >= 0) {
@@ -809,8 +810,12 @@
}
if (yld->urb_ctl)
usb_free_urb(yld->urb_ctl);
- if (yld->idev.dev)
- input_unregister_device(&yld->idev);
+ if (yld->idev) {
+ if (err)
+ input_free_device(yld->idev);
+ else
+ input_unregister_device(yld->idev);
+ }
if (yld->ctl_req)
usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
yld->ctl_req, yld->ctl_req_dma);
@@ -857,7 +862,7 @@
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct yealink_dev *yld;
- char path[64];
+ struct input_dev *input_dev;
int ret, pipe, i;
i = usb_match(udev);
@@ -866,17 +871,21 @@
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
+ if (!(endpoint->bEndpointAddress & USB_DIR_IN))
return -EIO;
- if ((endpoint->bmAttributes & 3) != 3)
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
return -EIO;
- if ((yld = kmalloc(sizeof(struct yealink_dev), GFP_KERNEL)) == NULL)
+ yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL);
+ if (!yld)
return -ENOMEM;
- memset(yld, 0, sizeof(*yld));
yld->udev = udev;
+ yld->idev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return usb_cleanup(yld, -ENOMEM);
+
/* allocate usb buffers */
yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
SLAB_ATOMIC, &yld->irq_dma);
@@ -935,42 +944,37 @@
yld->urb_ctl->dev = udev;
/* find out the physical bus location */
- if (usb_make_path(udev, path, sizeof(path)) > 0)
- snprintf(yld->phys, sizeof(yld->phys)-1, "%s/input0", path);
+ usb_make_path(udev, yld->phys, sizeof(yld->phys));
+ strlcat(yld->phys, "/input0", sizeof(yld->phys));
/* register settings for the input device */
- init_input_dev(&yld->idev);
- yld->idev.private = yld;
- yld->idev.id.bustype = BUS_USB;
- yld->idev.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
- yld->idev.id.product = le16_to_cpu(udev->descriptor.idProduct);
- yld->idev.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
- yld->idev.dev = &intf->dev;
- yld->idev.name = yld_device[i].name;
- yld->idev.phys = yld->phys;
- /* yld->idev.event = input_ev; TODO */
- yld->idev.open = input_open;
- yld->idev.close = input_close;
+ input_dev->name = yld_device[i].name;
+ input_dev->phys = yld->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+
+ input_dev->private = yld;
+ input_dev->open = input_open;
+ input_dev->close = input_close;
+ /* input_dev->event = input_ev; TODO */
/* register available key events */
- yld->idev.evbit[0] = BIT(EV_KEY);
+ input_dev->evbit[0] = BIT(EV_KEY);
for (i = 0; i < 256; i++) {
int k = map_p1k_to_key(i);
if (k >= 0) {
- set_bit(k & 0xff, yld->idev.keybit);
+ set_bit(k & 0xff, input_dev->keybit);
if (k >> 8)
- set_bit(k >> 8, yld->idev.keybit);
+ set_bit(k >> 8, input_dev->keybit);
}
}
- printk(KERN_INFO "input: %s on %s\n", yld->idev.name, path);
-
- input_register_device(&yld->idev);
+ input_register_device(yld->idev);
usb_set_intfdata(intf, yld);
/* clear visible elements */
- for (i=0; i<ARRAY_SIZE(lcdMap); i++)
+ for (i = 0; i < ARRAY_SIZE(lcdMap); i++)
setChar(yld, i, ' ');
/* display driver version on LCD line 3 */
diff --git a/drivers/usb/media/dabusb.c b/drivers/usb/media/dabusb.c
index 6ca2fae..27b23c5 100644
--- a/drivers/usb/media/dabusb.c
+++ b/drivers/usb/media/dabusb.c
@@ -707,9 +707,8 @@
};
static struct usb_class_driver dabusb_class = {
- .name = "usb/dabusb%d",
+ .name = "dabusb%d",
.fops = &dabusb_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = DABUSB_MINOR,
};
diff --git a/drivers/usb/media/konicawc.c b/drivers/usb/media/konicawc.c
index 20ac9e1..9fe2c27 100644
--- a/drivers/usb/media/konicawc.c
+++ b/drivers/usb/media/konicawc.c
@@ -119,7 +119,7 @@
int yplanesz; /* Number of bytes in the Y plane */
unsigned int buttonsts:1;
#ifdef CONFIG_INPUT
- struct input_dev input;
+ struct input_dev *input;
char input_physname[64];
#endif
};
@@ -218,6 +218,57 @@
konicawc_camera_on(uvd);
}
+#ifdef CONFIG_INPUT
+
+static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev)
+{
+ struct input_dev *input_dev;
+
+ usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
+ strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));
+
+ cam->input = input_dev = input_allocate_device();
+ if (!input_dev) {
+ warn("Not enough memory for camera's input device\n");
+ return;
+ }
+
+ input_dev->name = "Konicawc snapshot button";
+ input_dev->phys = cam->input_physname;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &dev->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY);
+ input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0);
+
+ input_dev->private = cam;
+
+ input_register_device(cam->input);
+}
+
+static void konicawc_unregister_input(struct konicawc *cam)
+{
+ if (cam->input) {
+ input_unregister_device(cam->input);
+ cam->input = NULL;
+ }
+}
+
+static void konicawc_report_buttonstat(struct konicawc *cam)
+{
+ if (cam->input) {
+ input_report_key(cam->input, BTN_0, cam->buttonsts);
+ input_sync(cam->input);
+ }
+}
+
+#else
+
+static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { }
+static inline void konicawc_unregister_input(struct konicawc *cam) { }
+static inline void konicawc_report_buttonstat(struct konicawc *cam) { }
+
+#endif /* CONFIG_INPUT */
static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb)
{
@@ -273,10 +324,7 @@
if(button != cam->buttonsts) {
DEBUG(2, "button: %sclicked", button ? "" : "un");
cam->buttonsts = button;
-#ifdef CONFIG_INPUT
- input_report_key(&cam->input, BTN_0, cam->buttonsts);
- input_sync(&cam->input);
-#endif
+ konicawc_report_buttonstat(cam);
}
if(sts == 0x01) { /* drop frame */
@@ -645,9 +693,9 @@
RingQueue_Flush(&uvd->dp);
cam->lastframe = -2;
if(uvd->curframe != -1) {
- uvd->frame[uvd->curframe].curline = 0;
- uvd->frame[uvd->curframe].seqRead_Length = 0;
- uvd->frame[uvd->curframe].seqRead_Index = 0;
+ uvd->frame[uvd->curframe].curline = 0;
+ uvd->frame[uvd->curframe].seqRead_Length = 0;
+ uvd->frame[uvd->curframe].seqRead_Index = 0;
}
konicawc_start_data(uvd);
@@ -718,7 +766,6 @@
DEBUG(1, "setting initial values");
}
-
static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid)
{
struct usb_device *dev = interface_to_usbdev(intf);
@@ -839,21 +886,8 @@
err("usbvideo_RegisterVideoDevice() failed.");
uvd = NULL;
}
-#ifdef CONFIG_INPUT
- /* Register input device for button */
- memset(&cam->input, 0, sizeof(struct input_dev));
- cam->input.name = "Konicawc snapshot button";
- cam->input.private = cam;
- cam->input.evbit[0] = BIT(EV_KEY);
- cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
- usb_to_input_id(dev, &cam->input.id);
- input_register_device(&cam->input);
-
- usb_make_path(dev, cam->input_physname, 56);
- strcat(cam->input_physname, "/input0");
- cam->input.phys = cam->input_physname;
- info("konicawc: %s on %s\n", cam->input.name, cam->input.phys);
-#endif
+
+ konicawc_register_input(cam, dev);
}
if (uvd) {
@@ -869,10 +903,9 @@
int i;
struct konicawc *cam = (struct konicawc *)uvd->user_data;
-#ifdef CONFIG_INPUT
- input_unregister_device(&cam->input);
-#endif
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ konicawc_unregister_input(cam);
+
+ for (i = 0; i < USBVIDEO_NUMSBUF; i++) {
usb_free_urb(cam->sts_urb[i]);
cam->sts_urb[i] = NULL;
}
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index ae4681f..5f33f7c 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -1873,9 +1873,8 @@
};
static struct usb_class_driver auerswald_class = {
- .name = "usb/auer%d",
+ .name = "auer%d",
.fops = &auerswald_fops,
- .mode = S_IFCHR | S_IRUGO | S_IWUGO,
.minor_base = AUER_MINOR_BASE,
};
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 733acc2..1dc3e0f 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -105,11 +105,10 @@
.release = idmouse_release,
};
-/* class driver information for devfs */
+/* class driver information */
static struct usb_class_driver idmouse_class = {
- .name = "usb/idmouse%d",
+ .name = "idmouse%d",
.fops = &idmouse_fops,
- .mode = S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH, /* filemode (char, 444) */
.minor_base = USB_IDMOUSE_MINOR_BASE,
};
@@ -320,20 +319,8 @@
return -ENODEV;
}
- if (*ppos >= IMGSIZE) {
- up (&dev->sem);
- return 0;
- }
-
- count = min ((loff_t)count, IMGSIZE - (*ppos));
-
- if (copy_to_user (buffer, dev->bulk_in_buffer + *ppos, count)) {
- result = -EFAULT;
- } else {
- result = count;
- *ppos += count;
- }
-
+ result = simple_read_from_buffer(buffer, count, ppos,
+ dev->bulk_in_buffer, IMGSIZE);
/* unlock the device */
up(&dev->sem);
return result;
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 7d06105..2703e20 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -271,12 +271,11 @@
/*
* usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
+ * and to have the device registered with the driver core
*/
static struct usb_class_driver tower_class = {
- .name = "usb/legousbtower%d",
+ .name = "legousbtower%d",
.fops = &tower_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
.minor_base = LEGO_USB_TOWER_MINOR_BASE,
};
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 26f77e2..7d02d8e 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -443,9 +443,8 @@
};
static struct usb_class_driver usb_rio_class = {
- .name = "usb/rio500%d",
+ .name = "rio500%d",
.fops = &usb_rio_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = RIO_MINOR,
};
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 39db315..c946c9a 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2440,7 +2440,7 @@
sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init)
{
int ret = 0, slot = sisusb->font_slot, i;
- struct font_desc *myfont;
+ const struct font_desc *myfont;
u8 *tempbuf;
u16 *tempbufb;
size_t written;
@@ -3239,12 +3239,7 @@
};
static struct usb_class_driver usb_sisusb_class = {
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
- .name = "usb/sisusbvga%d",
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
-#else
.name = "sisusbvga%d",
-#endif
.fops = &usb_sisusb_fops,
.minor_base = SISUSB_MINOR
};
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 096ab30..85f3725 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -251,13 +251,12 @@
};
/*
- * * usb class driver info in order to get a minor number from the usb core,
- * * and to have the device registered with devfs and the driver core
- * */
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with the driver core
+ */
static struct usb_class_driver lcd_class = {
- .name = "usb/lcd%d",
+ .name = "lcd%d",
.fops = &lcd_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
.minor_base = USBLCD_MINOR,
};
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 54799eb..2997f55 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -9,7 +9,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/usb.h>
@@ -381,7 +381,6 @@
sg = kmalloc (nents * sizeof *sg, SLAB_KERNEL);
if (!sg)
return NULL;
- memset (sg, 0, nents * sizeof *sg);
for (i = 0; i < nents; i++) {
char *buf;
@@ -394,9 +393,7 @@
memset (buf, 0, size);
/* kmalloc pages are always physically contiguous! */
- sg [i].page = virt_to_page (buf);
- sg [i].offset = offset_in_page (buf);
- sg [i].length = size;
+ sg_init_one(&sg[i], buf, size);
if (vary) {
size += vary;
@@ -983,6 +980,7 @@
reqp->number = i % NUM_SUBCASES;
reqp->expected = expected;
u->setup_packet = (char *) &reqp->setup;
+ u->transfer_flags |= URB_NO_SETUP_DMA_MAP;
u->context = &context;
u->complete = ctrl_complete;
@@ -1948,21 +1946,11 @@
static int usbtest_suspend (struct usb_interface *intf, pm_message_t message)
{
- struct usbtest_dev *dev = usb_get_intfdata (intf);
-
- down (&dev->sem);
- intf->dev.power.power_state = PMSG_SUSPEND;
- up (&dev->sem);
return 0;
}
static int usbtest_resume (struct usb_interface *intf)
{
- struct usbtest_dev *dev = usb_get_intfdata (intf);
-
- down (&dev->sem);
- intf->dev.power.power_state = PMSG_ON;
- up (&dev->sem);
return 0;
}
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 03fb70e..0592cb5 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -137,7 +137,7 @@
static struct uss720_async_request *submit_async_request(struct parport_uss720_private *priv,
__u8 request, __u8 requesttype, __u16 value, __u16 index,
- unsigned int mem_flags)
+ gfp_t mem_flags)
{
struct usb_device *usbdev;
struct uss720_async_request *rq;
@@ -204,7 +204,7 @@
/* --------------------------------------------------------------------- */
-static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, unsigned int mem_flags)
+static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, gfp_t mem_flags)
{
struct parport_uss720_private *priv;
struct uss720_async_request *rq;
@@ -238,7 +238,7 @@
return -EIO;
}
-static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, unsigned int mem_flags)
+static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, gfp_t mem_flags)
{
struct parport_uss720_private *priv;
struct uss720_async_request *rq;
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index 508a210..c34944c 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -11,6 +11,7 @@
#include <linux/usb.h>
#include <linux/debugfs.h>
#include <linux/smp_lock.h>
+#include <linux/notifier.h>
#include "usb_mon.h"
#include "../core/hcd.h"
@@ -205,6 +206,23 @@
up(&mon_lock);
}
+static int mon_notify(struct notifier_block *self, unsigned long action,
+ void *dev)
+{
+ switch (action) {
+ case USB_BUS_ADD:
+ mon_bus_add(dev);
+ break;
+ case USB_BUS_REMOVE:
+ mon_bus_remove(dev);
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block mon_nb = {
+ .notifier_call = mon_notify,
+};
+
/*
* Ops
*/
@@ -212,8 +230,6 @@
.urb_submit = mon_submit,
.urb_submit_error = mon_submit_error,
.urb_complete = mon_complete,
- .bus_add = mon_bus_add,
- .bus_remove = mon_bus_remove,
};
/*
@@ -329,6 +345,8 @@
}
// MOD_INC_USE_COUNT(which_module?);
+ usb_register_notify(&mon_nb);
+
down(&usb_bus_list_lock);
list_for_each_entry (ubus, &usb_bus_list, bus_list) {
mon_bus_init(mondir, ubus);
@@ -342,6 +360,7 @@
struct mon_bus *mbus;
struct list_head *p;
+ usb_unregister_notify(&mon_nb);
usb_mon_deregister();
down(&mon_lock);
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index 8c010bb..efd6ca7 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -294,7 +294,7 @@
This also supports some related device firmware, as used in some
PDAs from Olympus and some cell phones from Motorola.
- If you install an alternate ROM image, such as the Linux 2.6 based
+ If you install an alternate image, such as the Linux 2.6 based
versions of OpenZaurus, you should no longer need to support this
protocol. Only the "eth-fd" or "net_fd" drivers in these devices
really need this non-conformant variant of CDC Ethernet (or in
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 861f00a..252a34f 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -753,7 +753,7 @@
}
static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
- unsigned flags)
+ gfp_t flags)
{
int padlen;
int headroom = skb_headroom(skb);
diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c
index c8763ae..c0f263b 100644
--- a/drivers/usb/net/gl620a.c
+++ b/drivers/usb/net/gl620a.c
@@ -301,7 +301,7 @@
}
static struct sk_buff *
-genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags)
+genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
int padlen;
int length = skb->len;
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index e04b0ce..6bef1be 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -469,7 +469,7 @@
0,
KAWETH_CONTROL_TIMEOUT);
- udelay(10000);
+ mdelay(10);
kaweth_dbg("kaweth_reset() returns %d.",result);
@@ -477,13 +477,13 @@
}
static void kaweth_usb_receive(struct urb *, struct pt_regs *regs);
-static int kaweth_resubmit_rx_urb(struct kaweth_device *, unsigned);
+static int kaweth_resubmit_rx_urb(struct kaweth_device *, gfp_t);
/****************************************************************
int_callback
*****************************************************************/
-static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, int mf)
+static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf)
{
int status;
@@ -550,7 +550,7 @@
* kaweth_resubmit_rx_urb
****************************************************************/
static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
- unsigned mem_flags)
+ gfp_t mem_flags)
{
int result;
diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c
index a4309c4..cee55f8 100644
--- a/drivers/usb/net/net1080.c
+++ b/drivers/usb/net/net1080.c
@@ -500,7 +500,7 @@
}
static struct sk_buff *
-net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags)
+net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
int padlen;
struct sk_buff *skb2;
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 6a4ffe6..537eb18 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -1384,7 +1384,6 @@
usb_kill_urb(pegasus->rx_urb);
usb_kill_urb(pegasus->intr_urb);
}
- intf->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
@@ -1392,7 +1391,6 @@
{
struct pegasus *pegasus = usb_get_intfdata(intf);
- intf->dev.power.power_state = PMSG_ON;
netif_device_attach (pegasus->net);
if (netif_running(pegasus->net)) {
pegasus->rx_urb->status = 0;
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
index b98f2a8..9fbd59b 100644
--- a/drivers/usb/net/pegasus.h
+++ b/drivers/usb/net/pegasus.h
@@ -181,6 +181,8 @@
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
VENDOR_ADMTEK, 0x8511,
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
index 2ed2e5f..b5a925d 100644
--- a/drivers/usb/net/rndis_host.c
+++ b/drivers/usb/net/rndis_host.c
@@ -517,7 +517,7 @@
}
static struct sk_buff *
-rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags)
+rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
struct rndis_data_hdr *hdr;
struct sk_buff *skb2;
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index c3d4e35..787dd35 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -909,6 +909,7 @@
usb_set_intfdata(intf, NULL);
if (dev) {
set_bit(RTL8150_UNPLUG, &dev->flags);
+ tasklet_disable(&dev->tl);
unregister_netdev(dev->netdev);
unlink_all_urbs(dev);
free_all_urbs(dev);
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 6c46091..74f05c9 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -288,7 +288,7 @@
static void rx_complete (struct urb *urb, struct pt_regs *regs);
-static void rx_submit (struct usbnet *dev, struct urb *urb, unsigned flags)
+static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
{
struct sk_buff *skb;
struct skb_data *entry;
@@ -1185,7 +1185,6 @@
netif_device_detach (dev->net);
(void) unlink_urbs (dev, &dev->rxq);
(void) unlink_urbs (dev, &dev->txq);
- intf->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
EXPORT_SYMBOL_GPL(usbnet_suspend);
@@ -1194,7 +1193,6 @@
{
struct usbnet *dev = usb_get_intfdata(intf);
- intf->dev.power.power_state = PMSG_ON;
netif_device_attach (dev->net);
tasklet_schedule (&dev->bh);
return 0;
diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h
index 7aa0abd..89fc495 100644
--- a/drivers/usb/net/usbnet.h
+++ b/drivers/usb/net/usbnet.h
@@ -107,7 +107,7 @@
/* fixup tx packet (add framing) */
struct sk_buff *(*tx_fixup)(struct usbnet *dev,
- struct sk_buff *skb, unsigned flags);
+ struct sk_buff *skb, gfp_t flags);
/* for new devices, use the descriptor-reading code instead */
int in; /* rx endpoint */
diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c
index ee3b892..5d4b7d5 100644
--- a/drivers/usb/net/zaurus.c
+++ b/drivers/usb/net/zaurus.c
@@ -62,7 +62,7 @@
*/
static struct sk_buff *
-zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags)
+zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
int padlen;
struct sk_buff *skb2;
diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c
index c4e479e..2f52261 100644
--- a/drivers/usb/net/zd1201.c
+++ b/drivers/usb/net/zd1201.c
@@ -521,7 +521,7 @@
int reqlen;
char seq=0;
struct urb *urb;
- unsigned int gfp_mask = wait ? GFP_NOIO : GFP_ATOMIC;
+ gfp_t gfp_mask = wait ? GFP_NOIO : GFP_ATOMIC;
len += 4; /* first 4 are for header */
diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old
new file mode 100644
index 0000000..c1b2799
--- /dev/null
+++ b/drivers/usb/serial/ChangeLog.old
@@ -0,0 +1,730 @@
+This is the contents of some of the drivers/usb/serial/ files that had old
+changelog comments. They were quite old, and out of date, and we don't keep
+them anymore, so I've put them here, away from the source files, in case
+people still care to see them.
+
+- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005
+
+-----------------------------------------------------------------------
+usb-serial.h Change Log comments:
+
+ (03/26/2002) gkh
+ removed the port->tty check from port_paranoia_check() due to serial
+ consoles not having a tty device assigned to them.
+
+ (12/03/2001) gkh
+ removed active from the port structure.
+ added documentation to the usb_serial_device_type structure
+
+ (10/10/2001) gkh
+ added vendor and product to serial structure. Needed to determine device
+ owner when the device is disconnected.
+
+ (05/30/2001) gkh
+ added sem to port structure and removed port_lock
+
+ (10/05/2000) gkh
+ Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
+ fix bug with urb->dev not being set properly, now that the usb core
+ needs it.
+
+ (09/11/2000) gkh
+ Added usb_serial_debug_data function to help get rid of #DEBUG in the
+ drivers.
+
+ (08/28/2000) gkh
+ Added port_lock to port structure.
+
+ (08/08/2000) gkh
+ Added open_count to port structure.
+
+ (07/23/2000) gkh
+ Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+ Modifications to allow usb-serial drivers to be modules.
+
+-----------------------------------------------------------------------
+usb-serial.c Change Log comments:
+
+ (12/10/2002) gkh
+ Split the ports off into their own struct device, and added a
+ usb-serial bus driver.
+
+ (11/19/2002) gkh
+ removed a few #ifdefs for the generic code and cleaned up the failure
+ logic in initialization.
+
+ (10/02/2002) gkh
+ moved the console code to console.c and out of this file.
+
+ (06/05/2002) gkh
+ moved location of startup() call in serial_probe() until after all
+ of the port information and endpoints are initialized. This makes
+ things easier for some drivers.
+
+ (04/10/2002) gkh
+ added serial_read_proc function which creates a
+ /proc/tty/driver/usb-serial file.
+
+ (03/27/2002) gkh
+ Got USB serial console code working properly and merged into the main
+ version of the tree. Thanks to Randy Dunlap for the initial version
+ of this code, and for pushing me to finish it up.
+ The USB serial console works with any usb serial driver device.
+
+ (03/21/2002) gkh
+ Moved all manipulation of port->open_count into the core. Now the
+ individual driver's open and close functions are called only when the
+ first open() and last close() is called. Making the drivers a bit
+ smaller and simpler.
+ Fixed a bug if a driver didn't have the owner field set.
+
+ (02/26/2002) gkh
+ Moved all locking into the main serial_* functions, instead of having
+ the individual drivers have to grab the port semaphore. This should
+ reduce races.
+ Reworked the MOD_INC logic a bit to always increment and decrement, even
+ if the generic driver is being used.
+
+ (10/10/2001) gkh
+ usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
+ help prevent child drivers from accessing the device since it is now
+ gone.
+
+ (09/13/2001) gkh
+ Moved generic driver initialize after we have registered with the USB
+ core. Thanks to Randy Dunlap for pointing this problem out.
+
+ (07/03/2001) gkh
+ Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
+ Fixed vendor and product getting defined through the MODULE_PARM macro
+ if the Generic driver wasn't compiled in.
+ Fixed problem with generic_shutdown() not being called for drivers that
+ don't have a shutdown() function.
+
+ (06/06/2001) gkh
+ added evil hack that is needed for the prolific pl2303 device due to the
+ crazy way its endpoints are set up.
+
+ (05/30/2001) gkh
+ switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (04/08/2001) gb
+ Identify version on module load.
+
+ 2001_02_05 gkh
+ Fixed buffer overflows bug with the generic serial driver. Thanks to
+ Todd Squires <squirest@ct0.com> for fixing this.
+
+ (01/10/2001) gkh
+ Fixed bug where the generic serial adaptor grabbed _any_ device that was
+ offered to it.
+
+ (12/12/2000) gkh
+ Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
+ moved them to the serial_open and serial_close functions.
+ Also fixed bug with there not being a MOD_DEC for the generic driver
+ (thanks to Gary Brubaker for finding this.)
+
+ (11/29/2000) gkh
+ Small NULL pointer initialization cleanup which saves a bit of disk image
+
+ (11/01/2000) Adam J. Richter
+ instead of using idVendor/idProduct pairs, usb serial drivers
+ now identify their hardware interest with usb_device_id tables,
+ which they usually have anyhow for use with MODULE_DEVICE_TABLE.
+
+ (10/05/2000) gkh
+ Fixed bug with urb->dev not being set properly, now that the usb
+ core needs it.
+
+ (09/11/2000) gkh
+ Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (08/28/2000) gkh
+ Added port_lock to port structure.
+ Added locks for SMP safeness to generic driver
+ Fixed the ability to open a generic device's port more than once.
+
+ (07/23/2000) gkh
+ Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+ Modifications to allow usb-serial drivers to be modules.
+
+ (07/03/2000) gkh
+ Added more debugging to serial_ioctl call
+
+ (06/25/2000) gkh
+ Changed generic_write_bulk_callback to not call wake_up_interruptible
+ directly, but to have port_softint do it at a safer time.
+
+ (06/23/2000) gkh
+ Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (05/22/2000) gkh
+ Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
+ removed from the individual device source files.
+
+ (05/03/2000) gkh
+ Added the Digi Acceleport driver from Al Borchers and Peter Berger.
+
+ (05/02/2000) gkh
+ Changed devfs and tty register code to work properly now. This was based on
+ the ACM driver changes by Vojtech Pavlik.
+
+ (04/27/2000) Ryan VanderBijl
+ Put calls to *_paranoia_checks into one function.
+
+ (04/23/2000) gkh
+ Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
+ Moved when the startup code printed out the devices that are supported.
+
+ (04/19/2000) gkh
+ Added driver for ZyXEL omni.net lcd plus ISDN TA
+ Made startup info message specify which drivers were compiled in.
+
+ (04/03/2000) gkh
+ Changed the probe process to remove the module unload races.
+ Changed where the tty layer gets initialized to have devfs work nicer.
+ Added initial devfs support.
+
+ (03/26/2000) gkh
+ Split driver up into device specific pieces.
+
+ (03/19/2000) gkh
+ Fixed oops that could happen when device was removed while a program
+ was talking to the device.
+ Removed the static urbs and now all urbs are created and destroyed
+ dynamically.
+ Reworked the internal interface. Now everything is based on the
+ usb_serial_port structure instead of the larger usb_serial structure.
+ This fixes the bug that a multiport device could not have more than
+ one port open at one time.
+
+ (03/17/2000) gkh
+ Added config option for debugging messages.
+ Added patch for keyspan pda from Brian Warner.
+
+ (03/06/2000) gkh
+ Added the keyspan pda code from Brian Warner <warner@lothar.com>
+ Moved a bunch of the port specific stuff into its own structure. This
+ is in anticipation of the true multiport devices (there's a bug if you
+ try to access more than one port of any multiport device right now)
+
+ (02/21/2000) gkh
+ Made it so that any serial devices only have to specify which functions
+ they want to overload from the generic function calls (great,
+ inheritance in C, in a driver, just what I wanted...)
+ Added support for set_termios and ioctl function calls. No drivers take
+ advantage of this yet.
+ Removed the #ifdef MODULE, now there is no module specific code.
+ Cleaned up a few comments in usb-serial.h that were wrong (thanks again
+ to Miles Lott).
+ Small fix to get_free_serial.
+
+ (02/14/2000) gkh
+ Removed the Belkin and Peracom functionality from the driver due to
+ the lack of support from the vendor, and me not wanting people to
+ accidenatly buy the device, expecting it to work with Linux.
+ Added read_bulk_callback and write_bulk_callback to the type structure
+ for the needs of the FTDI and WhiteHEAT driver.
+ Changed all reverences to FTDI to FTDI_SIO at the request of Bill
+ Ryder.
+ Changed the output urb size back to the max endpoint size to make
+ the ftdi_sio driver have it easier, and due to the fact that it didn't
+ really increase the speed any.
+
+ (02/11/2000) gkh
+ Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
+ patch from Miles Lott (milos@insync.net).
+ Fixed bug with not restoring the minor range that a device grabs, if
+ the startup function fails (thanks Miles for finding this).
+
+ (02/05/2000) gkh
+ Added initial framework for the Keyspan PDA serial converter so that
+ Brian Warner has a place to put his code.
+ Made the ezusb specific functions generic enough that different
+ devices can use them (whiteheat and keyspan_pda both need them).
+ Split out a whole bunch of structure and other stuff to a separate
+ usb-serial.h file.
+ Made the Visor connection messages a little more understandable, now
+ that Miles Lott (milos@insync.net) has gotten the Generic channel to
+ work. Also made them always show up in the log file.
+
+ (01/25/2000) gkh
+ Added initial framework for FTDI serial converter so that Bill Ryder
+ has a place to put his code.
+ Added the vendor specific info from Handspring. Now we can print out
+ informational debug messages as well as understand what is happening.
+
+ (01/23/2000) gkh
+ Fixed problem of crash when trying to open a port that didn't have a
+ device assigned to it. Made the minor node finding a little smarter,
+ now it looks to find a continuous space for the new device.
+
+ (01/21/2000) gkh
+ Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
+ Fixed get_serial_by_minor which was all messed up for multi port
+ devices. Fixed multi port problem for generic devices. Now the number
+ of ports is determined by the number of bulk out endpoints for the
+ generic device.
+
+ (01/19/2000) gkh
+ Removed lots of cruft that was around from the old (pre urb) driver
+ interface.
+ Made the serial_table dynamic. This should save lots of memory when
+ the number of minor nodes goes up to 256.
+ Added initial support for devices that have more than one port.
+ Added more debugging comments for the Visor, and added a needed
+ set_configuration call.
+
+ (01/17/2000) gkh
+ Fixed the WhiteHEAT firmware (my processing tool had a bug)
+ and added new debug loader firmware for it.
+ Removed the put_char function as it isn't really needed.
+ Added visor startup commands as found by the Win98 dump.
+
+ (01/13/2000) gkh
+ Fixed the vendor id for the generic driver to the one I meant it to be.
+
+ (01/12/2000) gkh
+ Forget the version numbering...that's pretty useless...
+ Made the driver able to be compiled so that the user can select which
+ converter they want to use. This allows people who only want the Visor
+ support to not pay the memory size price of the WhiteHEAT.
+ Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
+ grabbed the root hub. Not good.
+
+ version 0.4.0 (01/10/2000) gkh
+ Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
+ device. Added startup function to allow firmware to be downloaded to
+ a device if it needs to be.
+ Added firmware download logic to the WhiteHEAT device.
+ Started to add #defines to split up the different drivers for potential
+ configuration option.
+
+ version 0.3.1 (12/30/99) gkh
+ Fixed problems with urb for bulk out.
+ Added initial support for multiple sets of endpoints. This enables
+ the Handspring Visor to be attached successfully. Only the first
+ bulk in / bulk out endpoint pair is being used right now.
+
+ version 0.3.0 (12/27/99) gkh
+ Added initial support for the Handspring Visor based on a patch from
+ Miles Lott (milos@sneety.insync.net)
+ Cleaned up the code a bunch and converted over to using urbs only.
+
+ version 0.2.3 (12/21/99) gkh
+ Added initial support for the Connect Tech WhiteHEAT converter.
+ Incremented the number of ports in expectation of getting the
+ WhiteHEAT to work properly (4 ports per connection).
+ Added notification on insertion and removal of what port the
+ device is/was connected to (and what kind of device it was).
+
+ version 0.2.2 (12/16/99) gkh
+ Changed major number to the new allocated number. We're legal now!
+
+ version 0.2.1 (12/14/99) gkh
+ Fixed bug that happens when device node is opened when there isn't a
+ device attached to it. Thanks to marek@webdesign.no for noticing this.
+
+ version 0.2.0 (11/10/99) gkh
+ Split up internals to make it easier to add different types of serial
+ converters to the code.
+ Added a "generic" driver that gets it's vendor and product id
+ from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
+ for the idea and sample code (from the usb scanner driver.)
+ Cleared up any licensing questions by releasing it under the GNU GPL.
+
+ version 0.1.2 (10/25/99) gkh
+ Fixed bug in detecting device.
+
+ version 0.1.1 (10/05/99) gkh
+ Changed the major number to not conflict with anything else.
+
+ version 0.1 (09/28/99) gkh
+ Can recognize the two different devices and start up a read from
+ device when asked to. Writes also work. No control signals yet, this
+ all is vendor specific data (i.e. no spec), also no control for
+ different baud rates or other bit settings.
+ Currently we are using the same devid as the acm driver. This needs
+ to change.
+
+-----------------------------------------------------------------------
+visor.c Change Log comments:
+
+ (06/03/2003) Judd Montgomery <judd at jpilot.org>
+ Added support for module parameter options for untested/unknown
+ devices.
+
+ (03/09/2003) gkh
+ Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
+ <brachtl@redgrep.cz> for the information.
+
+ (03/05/2003) gkh
+ Think Treo support is now working.
+
+ (04/03/2002) gkh
+ Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
+ <hiro@zob.ne.jp> for the information.
+
+ (03/27/2002) gkh
+ Removed assumptions that port->tty was always valid (is not true
+ for usb serial console devices.)
+
+ (03/23/2002) gkh
+ Added support for the Palm i705 device, thanks to Thomas Riemer
+ <tom@netmech.com> for the information.
+
+ (03/21/2002) gkh
+ Added support for the Palm m130 device, thanks to Udo Eisenbarth
+ <udo.eisenbarth@web.de> for the information.
+
+ (02/27/2002) gkh
+ Reworked the urb handling logic. We have no more pool, but dynamically
+ allocate the urb and the transfer buffer on the fly. In testing this
+ does not incure any measurable overhead. This also relies on the fact
+ that we have proper reference counting logic for urbs.
+
+ (02/21/2002) SilaS
+ Added initial support for the Palm m515 devices.
+
+ (02/14/2002) gkh
+ Added support for the Clie S-360 device.
+
+ (12/18/2001) gkh
+ Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
+ for the patch.
+
+ (11/11/2001) gkh
+ Added support for the m125 devices, and added check to prevent oopses
+ for Clié devices that lie about the number of ports they have.
+
+ (08/30/2001) gkh
+ Added support for the Clie devices, both the 3.5 and 4.0 os versions.
+ Many thanks to Daniel Burke, and Bryan Payne for helping with this.
+
+ (08/23/2001) gkh
+ fixed a few potential bugs pointed out by Oliver Neukum.
+
+ (05/30/2001) gkh
+ switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (05/28/2000) gkh
+ Added initial support for the Palm m500 and Palm m505 devices.
+
+ (04/08/2001) gb
+ Identify version on module load.
+
+ (01/21/2000) gkh
+ Added write_room and chars_in_buffer, as they were previously using the
+ generic driver versions which is all wrong now that we are using an urb
+ pool. Thanks to Wolfgang Grandegger for pointing this out to me.
+ Removed count assignment in the write function, which was not needed anymore
+ either. Thanks to Al Borchers for pointing this out.
+
+ (12/12/2000) gkh
+ Moved MOD_DEC to end of visor_close to be nicer, as the final write
+ message can sleep.
+
+ (11/12/2000) gkh
+ Fixed bug with data being dropped on the floor by forcing tty->low_latency
+ to be on. Hopefully this fixes the OHCI issue!
+
+ (11/01/2000) Adam J. Richter
+ usb_device_id table support
+
+ (10/05/2000) gkh
+ Fixed bug with urb->dev not being set properly, now that the usb
+ core needs it.
+
+ (09/11/2000) gkh
+ Got rid of always calling kmalloc for every urb we wrote out to the
+ device.
+ Added visor_read_callback so we can keep track of bytes in and out for
+ those people who like to know the speed of their device.
+ Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (09/06/2000) gkh
+ Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
+ the host controller drivers set urb->dev = NULL when the urb is finished.
+
+ (08/28/2000) gkh
+ Added locks for SMP safeness.
+
+ (08/08/2000) gkh
+ Fixed endian problem in visor_startup.
+ Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
+ than once.
+
+ (07/23/2000) gkh
+ Added pool of write urbs to speed up transfers to the visor.
+
+ (07/19/2000) gkh
+ Added module_init and module_exit functions to handle the fact that this
+ driver is a loadable module now.
+
+ (07/03/2000) gkh
+ Added visor_set_ioctl and visor_set_termios functions (they don't do much
+ of anything, but are good for debugging.)
+
+ (06/25/2000) gkh
+ Fixed bug in visor_unthrottle that should help with the disconnect in PPP
+ bug that people have been reporting.
+
+ (06/23/2000) gkh
+ Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (04/27/2000) Ryan VanderBijl
+ Fixed memory leak in visor_close
+
+ (03/26/2000) gkh
+ Split driver up into device specific pieces.
+
+-----------------------------------------------------------------------
+pl2303.c Change Log comments:
+
+ 2002_Mar_26 gkh
+ allowed driver to work properly if there is no tty assigned to a port
+ (this happens for serial console devices.)
+
+ 2001_Oct_06 gkh
+ Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
+
+ 2001_Sep_19 gkh
+ Added break support.
+
+ 2001_Aug_30 gkh
+ fixed oops in write_bulk_callback.
+
+ 2001_Aug_28 gkh
+ reworked buffer logic to be like other usb-serial drivers. Hopefully
+ removing some reported problems.
+
+ 2001_Jun_06 gkh
+ finished porting to 2.4 format.
+
+
+-----------------------------------------------------------------------
+io_edgeport.c Change Log comments:
+
+ 2003_04_03 al borchers
+ - fixed a bug (that shows up with dosemu) where the tty struct is
+ used in a callback after it has been freed
+
+ 2.3 2002_03_08 greg kroah-hartman
+ - fixed bug when multiple devices were attached at the same time.
+
+ 2.2 2001_11_14 greg kroah-hartman
+ - fixed bug in edge_close that kept the port from being used more
+ than once.
+ - fixed memory leak on device removal.
+ - fixed potential double free of memory when command urb submitting
+ failed.
+ - other small cleanups when the device is removed
+
+ 2.1 2001_07_09 greg kroah-hartman
+ - added support for TIOCMBIS and TIOCMBIC.
+
+ (04/08/2001) gb
+ - Identify version on module load.
+
+ 2.0 2001_03_05 greg kroah-hartman
+ - reworked entire driver to fit properly in with the other usb-serial
+ drivers. Occasional oopses still happen, but it's a good start.
+
+ 1.2.3 (02/23/2001) greg kroah-hartman
+ - changed device table to work properly for 2.4.x final format.
+ - fixed problem with dropping data at high data rates.
+
+ 1.2.2 (11/27/2000) greg kroah-hartman
+ - cleaned up more NTisms.
+ - Added device table for 2.4.0-test11
+
+ 1.2.1 (11/08/2000) greg kroah-hartman
+ - Started to clean up NTisms.
+ - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
+
+ 1.2 (10/17/2000) David Iacovelli
+ Remove all EPIC code and GPL source
+ Fix RELEVANT_IFLAG macro to include flow control
+ changes port configuration changes.
+ Fix redefinition of SERIAL_MAGIC
+ Change all timeout values to 5 seconds
+ Tried to fix the UHCI multiple urb submission, but failed miserably.
+ it seems to work fine with OHCI.
+ ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
+ find a way to work arount this UHCI bug )
+
+ 1.1 (10/11/2000) David Iacovelli
+ Fix XON/XOFF flow control to support both IXON and IXOFF
+
+ 0.9.27 (06/30/2000) David Iacovelli
+ Added transmit queue and now allocate urb for command writes.
+
+ 0.9.26 (06/29/2000) David Iacovelli
+ Add support for 80251 based edgeport
+
+ 0.9.25 (06/27/2000) David Iacovelli
+ Do not close the port if it has multiple opens.
+
+ 0.9.24 (05/26/2000) David Iacovelli
+ Add IOCTLs to support RXTX and JAVA POS
+ and first cut at running BlackBox Demo
+
+ 0.9.23 (05/24/2000) David Iacovelli
+ Add IOCTLs to support RXTX and JAVA POS
+
+ 0.9.22 (05/23/2000) David Iacovelli
+ fixed bug in enumeration. If epconfig turns on mapping by
+ path after a device is already plugged in, we now update
+ the mapping correctly
+
+ 0.9.21 (05/16/2000) David Iacovelli
+ Added BlockUntilChaseResp() to also wait for txcredits
+ Updated the way we allocate and handle write URBs
+ Add debug code to dump buffers
+
+ 0.9.20 (05/01/2000) David Iacovelli
+ change driver to use usb/tts/
+
+ 0.9.19 (05/01/2000) David Iacovelli
+ Update code to compile if DEBUG is off
+
+ 0.9.18 (04/28/2000) David Iacovelli
+ cleanup and test tty_register with devfs
+
+ 0.9.17 (04/27/2000) greg kroah-hartman
+ changed tty_register around to be like the way it
+ was before, but now it works properly with devfs.
+
+ 0.9.16 (04/26/2000) david iacovelli
+ Fixed bug in GetProductInfo()
+
+ 0.9.15 (04/25/2000) david iacovelli
+ Updated enumeration
+
+ 0.9.14 (04/24/2000) david iacovelli
+ Removed all config/status IOCTLS and
+ converted to using /proc/edgeport
+ still playing with devfs
+
+ 0.9.13 (04/24/2000) david iacovelli
+ Removed configuration based on ttyUSB0
+ Added support for configuration using /prod/edgeport
+ first attempt at using devfs (not working yet!)
+ Added IOCTL to GetProductInfo()
+ Added support for custom baud rates
+ Add support for random port numbers
+
+ 0.9.12 (04/18/2000) david iacovelli
+ added additional configuration IOCTLs
+ use ttyUSB0 for configuration
+
+ 0.9.11 (04/17/2000) greg kroah-hartman
+ fixed module initialization race conditions.
+ made all urbs dynamically allocated.
+ made driver devfs compatible. now it only registers the tty device
+ when the device is actually plugged in.
+
+ 0.9.10 (04/13/2000) greg kroah-hartman
+ added proc interface framework.
+
+ 0.9.9 (04/13/2000) david iacovelli
+ added enumeration code and ioctls to configure the device
+
+ 0.9.8 (04/12/2000) david iacovelli
+ Change interrupt read start when device is plugged in
+ and stop when device is removed
+ process interrupt reads when all ports are closed
+ (keep value of rxBytesAvail consistent with the edgeport)
+ set the USB_BULK_QUEUE flag so that we can shove a bunch
+ of urbs at once down the pipe
+
+ 0.9.7 (04/10/2000) david iacovelli
+ start to add enumeration code.
+ generate serial number for epic devices
+ add support for kdb
+
+ 0.9.6 (03/30/2000) david iacovelli
+ add IOCTL to get string, manufacture, and boot descriptors
+
+ 0.9.5 (03/14/2000) greg kroah-hartman
+ more error checking added to SerialOpen to try to fix UHCI open problem
+
+ 0.9.4 (03/09/2000) greg kroah-hartman
+ added more error checking to handle oops when data is hanging
+ around and tty is abruptly closed.
+
+ 0.9.3 (03/09/2000) david iacovelli
+ Add epic support for xon/xoff chars
+ play with performance
+
+ 0.9.2 (03/08/2000) greg kroah-hartman
+ changed most "info" calls to "dbg"
+ implemented flow control properly in the termios call
+
+ 0.9.1 (03/08/2000) david iacovelli
+ added EPIC support
+ enabled bootloader update
+
+ 0.9 (03/08/2000) greg kroah-hartman
+ Release to IO networks.
+ Integrated changes that David made
+ made getting urbs for writing SMP safe
+
+ 0.8 (03/07/2000) greg kroah-hartman
+ Release to IO networks.
+ Fixed problems that were seen in code by David.
+ Now both Edgeport/4 and Edgeport/2 works properly.
+ Changed most of the functions to use port instead of serial.
+
+ 0.7 (02/27/2000) greg kroah-hartman
+ Milestone 3 release.
+ Release to IO Networks
+ ioctl for waiting on line change implemented.
+ ioctl for getting statistics implemented.
+ multiport support working.
+ lsr and msr registers are now handled properly.
+ change break now hooked up and working.
+ support for all known Edgeport devices.
+
+ 0.6 (02/22/2000) greg kroah-hartman
+ Release to IO networks.
+ CHASE is implemented correctly when port is closed.
+ SerialOpen now blocks correctly until port is fully opened.
+
+ 0.5 (02/20/2000) greg kroah-hartman
+ Release to IO networks.
+ Known problems:
+ modem status register changes are not sent on to the user
+ CHASE is not implemented when the port is closed.
+
+ 0.4 (02/16/2000) greg kroah-hartman
+ Second cut at the CeBit demo.
+ Doesn't leak memory on every write to the port
+ Still small leaks on startup.
+ Added support for Edgeport/2 and Edgeport/8
+
+ 0.3 (02/15/2000) greg kroah-hartman
+ CeBit demo release.
+ Force the line settings to 4800, 8, 1, e for the demo.
+ Warning! This version leaks memory like crazy!
+
+ 0.2 (01/30/2000) greg kroah-hartman
+ Milestone 1 release.
+ Device is found by USB subsystem, enumerated, fimware is downloaded
+ and the descriptors are printed to the debug log, config is set, and
+ green light starts to blink. Open port works, and data can be sent
+ and received at the default settings of the UART. Loopback connector
+ and debug log confirms this.
+
+ 0.1 (01/23/2000) greg kroah-hartman
+ Initial release to help IO Networks try to set up their test system.
+ Edgeport4 is recognized, firmware is downloaded, config is set so
+ device blinks green light every 3 sec. Port is bound, but opening,
+ closing, and sending data do not work properly.
+
+
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 9438909..7b5e8e4 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -394,6 +394,15 @@
To compile this driver as a module, choose M here: the
module will be called mct_u232.
+config USB_SERIAL_NOKIA_DKU2
+ tristate "USB Nokia DKU2 Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a Nokia DKU2 device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nokia_dku2.
+
config USB_SERIAL_PL2303
tristate "USB Prolific 2303 Single Port Serial Driver"
depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 6c7cdcc..55fd461 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -31,6 +31,7 @@
obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
+obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 926d4c2..1f29d88 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -30,9 +30,11 @@
.id_table = id_table,
};
-static struct usb_serial_device_type airprime_device = {
- .owner = THIS_MODULE,
- .name = "airprime",
+static struct usb_serial_driver airprime_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "airprime",
+ },
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index abb1b2c..84bc0ee 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -121,10 +121,12 @@
};
/* All of the device info needed for the serial converters */
-static struct usb_serial_device_type belkin_device = {
- .owner = THIS_MODULE,
- .name = "Belkin / Peracom / GoHubs USB Serial Adapter",
- .short_name = "belkin",
+static struct usb_serial_driver belkin_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "belkin",
+ },
+ .description = "Belkin / Peracom / GoHubs USB Serial Adapter",
.id_table = id_table_combined,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 2f612c2..664139a 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -18,7 +18,7 @@
static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
{
- struct usb_serial_device_type *driver;
+ struct usb_serial_driver *driver;
const struct usb_serial_port *port;
/*
@@ -44,7 +44,7 @@
static int usb_serial_device_probe (struct device *dev)
{
- struct usb_serial_device_type *driver;
+ struct usb_serial_driver *driver;
struct usb_serial_port *port;
int retval = 0;
int minor;
@@ -57,13 +57,13 @@
driver = port->serial->type;
if (driver->port_probe) {
- if (!try_module_get(driver->owner)) {
+ if (!try_module_get(driver->driver.owner)) {
dev_err(dev, "module get failed, exiting\n");
retval = -EIO;
goto exit;
}
retval = driver->port_probe (port);
- module_put(driver->owner);
+ module_put(driver->driver.owner);
if (retval)
goto exit;
}
@@ -72,7 +72,7 @@
tty_register_device (usb_serial_tty_driver, minor, dev);
dev_info(&port->serial->dev->dev,
"%s converter now attached to ttyUSB%d\n",
- driver->name, minor);
+ driver->description, minor);
exit:
return retval;
@@ -80,7 +80,7 @@
static int usb_serial_device_remove (struct device *dev)
{
- struct usb_serial_device_type *driver;
+ struct usb_serial_driver *driver;
struct usb_serial_port *port;
int retval = 0;
int minor;
@@ -92,43 +92,38 @@
driver = port->serial->type;
if (driver->port_remove) {
- if (!try_module_get(driver->owner)) {
+ if (!try_module_get(driver->driver.owner)) {
dev_err(dev, "module get failed, exiting\n");
retval = -EIO;
goto exit;
}
retval = driver->port_remove (port);
- module_put(driver->owner);
+ module_put(driver->driver.owner);
}
exit:
minor = port->number;
tty_unregister_device (usb_serial_tty_driver, minor);
dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
- driver->name, minor);
+ driver->description, minor);
return retval;
}
-int usb_serial_bus_register(struct usb_serial_device_type *device)
+int usb_serial_bus_register(struct usb_serial_driver *driver)
{
int retval;
- if (device->short_name)
- device->driver.name = (char *)device->short_name;
- else
- device->driver.name = (char *)device->name;
- device->driver.bus = &usb_serial_bus_type;
- device->driver.probe = usb_serial_device_probe;
- device->driver.remove = usb_serial_device_remove;
- device->driver.owner = device->owner;
+ driver->driver.bus = &usb_serial_bus_type;
+ driver->driver.probe = usb_serial_device_probe;
+ driver->driver.remove = usb_serial_device_remove;
- retval = driver_register(&device->driver);
+ retval = driver_register(&driver->driver);
return retval;
}
-void usb_serial_bus_deregister(struct usb_serial_device_type *device)
+void usb_serial_bus_deregister(struct usb_serial_driver *driver)
{
- driver_unregister (&device->driver);
+ driver_unregister(&driver->driver);
}
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 97c78c2..c5334dd 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -67,15 +67,17 @@
static struct usb_driver cp2101_driver = {
.owner = THIS_MODULE,
- .name = "CP2101",
+ .name = "cp2101",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
};
-static struct usb_serial_device_type cp2101_device = {
- .owner = THIS_MODULE,
- .name = "CP2101",
+static struct usb_serial_driver cp2101_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cp2101",
+ },
.id_table = id_table,
.num_interrupt_in = 0,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b5b4310..e581e4a 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -83,10 +83,12 @@
.id_table = id_table,
};
-static struct usb_serial_device_type cyberjack_device = {
- .owner = THIS_MODULE,
- .name = "Reiner SCT Cyberjack USB card reader",
- .short_name = "cyberjack",
+static struct usb_serial_driver cyberjack_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cyberjack",
+ },
+ .description = "Reiner SCT Cyberjack USB card reader",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9ee1aaf..af9290e 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -176,10 +176,12 @@
static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
-static struct usb_serial_device_type cypress_earthmate_device = {
- .owner = THIS_MODULE,
- .name = "DeLorme Earthmate USB",
- .short_name = "earthmate",
+static struct usb_serial_driver cypress_earthmate_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "earthmate",
+ },
+ .description = "DeLorme Earthmate USB",
.id_table = id_table_earthmate,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
@@ -203,10 +205,12 @@
.write_int_callback = cypress_write_int_callback,
};
-static struct usb_serial_device_type cypress_hidcom_device = {
- .owner = THIS_MODULE,
- .name = "HID->COM RS232 Adapter",
- .short_name = "cyphidcom",
+static struct usb_serial_driver cypress_hidcom_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cyphidcom",
+ },
+ .description = "HID->COM RS232 Adapter",
.id_table = id_table_cyphidcomrs232,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index a19a47f..dc74644 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -503,10 +503,12 @@
/* device info needed for the Digi serial converter */
-static struct usb_serial_device_type digi_acceleport_2_device = {
- .owner = THIS_MODULE,
- .name = "Digi 2 port USB adapter",
- .short_name = "digi_2",
+static struct usb_serial_driver digi_acceleport_2_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "digi_2",
+ },
+ .description = "Digi 2 port USB adapter",
.id_table = id_table_2,
.num_interrupt_in = 0,
.num_bulk_in = 4,
@@ -530,10 +532,12 @@
.shutdown = digi_shutdown,
};
-static struct usb_serial_device_type digi_acceleport_4_device = {
- .owner = THIS_MODULE,
- .name = "Digi 4 port USB adapter",
- .short_name = "digi_4",
+static struct usb_serial_driver digi_acceleport_4_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "digi_4",
+ },
+ .description = "Digi 4 port USB adapter",
.id_table = id_table_4,
.num_interrupt_in = 0,
.num_bulk_in = 5,
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 8d562ab..0b0546d 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -112,9 +112,11 @@
.id_table = id_table,
};
-static struct usb_serial_device_type empeg_device = {
- .owner = THIS_MODULE,
- .name = "Empeg",
+static struct usb_serial_driver empeg_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "empeg",
+ },
.id_table = id_table,
.num_interrupt_in = 0,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5a8631c..61204bf 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -411,6 +411,8 @@
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
/*
* These will probably use user-space drivers. Uncomment them if
* you need them or use the user-specified vendor/product module
@@ -428,7 +430,6 @@
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
- /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
@@ -471,6 +472,9 @@
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -558,10 +562,12 @@
static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor (int baud);
-static struct usb_serial_device_type ftdi_sio_device = {
- .owner = THIS_MODULE,
- .name = "FTDI USB Serial Device",
- .short_name = "ftdi_sio",
+static struct usb_serial_driver ftdi_sio_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ftdi_sio",
+ },
+ .description = "FTDI USB Serial Device",
.id_table = id_table_combined,
.num_interrupt_in = 0,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 2c35d74..ddb63df 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -199,6 +199,19 @@
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */
+#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */
+
+/*
* Protego product ids
*/
#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
@@ -329,6 +342,9 @@
#define EVOLUTION_VID 0xDEEE /* Vendor ID */
#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 2ef614d..35820bd 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1468,16 +1468,13 @@
}
-
-
-
-
-
/* All of the device info needed */
-static struct usb_serial_device_type garmin_device = {
- .owner = THIS_MODULE,
- .name = "Garmin GPS usb/tty",
- .short_name = "garmin_gps",
+static struct usb_serial_driver garmin_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "garmin_gps",
+ },
+ .description = "Garmin GPS usb/tty",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 5f7d319..8909208 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -36,10 +36,11 @@
static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
/* All of the device info needed for the Generic Serial Converter */
-struct usb_serial_device_type usb_serial_generic_device = {
- .owner = THIS_MODULE,
- .name = "Generic",
- .short_name = "generic",
+struct usb_serial_driver usb_serial_generic_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "generic",
+ },
.id_table = generic_device_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 64d55fb..8eadfb7 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -38,15 +38,17 @@
static struct usb_driver hp49gp_driver = {
.owner = THIS_MODULE,
- .name = "HP4X",
+ .name = "hp4X",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
};
-static struct usb_serial_device_type hp49gp_device = {
- .owner = THIS_MODULE,
- .name = "HP4X",
+static struct usb_serial_driver hp49gp_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "hp4X",
+ },
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 04bfe27..dc4c498 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -27,225 +27,6 @@
* Networks technical support, or Peter Berger <pberger@brimson.com>,
* or Al Borchers <alborchers@steinerpoint.com>.
*
- * Version history:
- *
- * 2003_04_03 al borchers
- * - fixed a bug (that shows up with dosemu) where the tty struct is
- * used in a callback after it has been freed
- *
- * 2.3 2002_03_08 greg kroah-hartman
- * - fixed bug when multiple devices were attached at the same time.
- *
- * 2.2 2001_11_14 greg kroah-hartman
- * - fixed bug in edge_close that kept the port from being used more
- * than once.
- * - fixed memory leak on device removal.
- * - fixed potential double free of memory when command urb submitting
- * failed.
- * - other small cleanups when the device is removed
- *
- * 2.1 2001_07_09 greg kroah-hartman
- * - added support for TIOCMBIS and TIOCMBIC.
- *
- * (04/08/2001) gb
- * - Identify version on module load.
- *
- * 2.0 2001_03_05 greg kroah-hartman
- * - reworked entire driver to fit properly in with the other usb-serial
- * drivers. Occasional oopses still happen, but it's a good start.
- *
- * 1.2.3 (02/23/2001) greg kroah-hartman
- * - changed device table to work properly for 2.4.x final format.
- * - fixed problem with dropping data at high data rates.
- *
- * 1.2.2 (11/27/2000) greg kroah-hartman
- * - cleaned up more NTisms.
- * - Added device table for 2.4.0-test11
- *
- * 1.2.1 (11/08/2000) greg kroah-hartman
- * - Started to clean up NTisms.
- * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
- *
- * 1.2 (10/17/2000) David Iacovelli
- * Remove all EPIC code and GPL source
- * Fix RELEVANT_IFLAG macro to include flow control
- * changes port configuration changes.
- * Fix redefinition of SERIAL_MAGIC
- * Change all timeout values to 5 seconds
- * Tried to fix the UHCI multiple urb submission, but failed miserably.
- * it seems to work fine with OHCI.
- * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
- * find a way to work arount this UHCI bug )
- *
- * 1.1 (10/11/2000) David Iacovelli
- * Fix XON/XOFF flow control to support both IXON and IXOFF
- *
- * 0.9.27 (06/30/2000) David Iacovelli
- * Added transmit queue and now allocate urb for command writes.
- *
- * 0.9.26 (06/29/2000) David Iacovelli
- * Add support for 80251 based edgeport
- *
- * 0.9.25 (06/27/2000) David Iacovelli
- * Do not close the port if it has multiple opens.
- *
- * 0.9.24 (05/26/2000) David Iacovelli
- * Add IOCTLs to support RXTX and JAVA POS
- * and first cut at running BlackBox Demo
- *
- * 0.9.23 (05/24/2000) David Iacovelli
- * Add IOCTLs to support RXTX and JAVA POS
- *
- * 0.9.22 (05/23/2000) David Iacovelli
- * fixed bug in enumeration. If epconfig turns on mapping by
- * path after a device is already plugged in, we now update
- * the mapping correctly
- *
- * 0.9.21 (05/16/2000) David Iacovelli
- * Added BlockUntilChaseResp() to also wait for txcredits
- * Updated the way we allocate and handle write URBs
- * Add debug code to dump buffers
- *
- * 0.9.20 (05/01/2000) David Iacovelli
- * change driver to use usb/tts/
- *
- * 0.9.19 (05/01/2000) David Iacovelli
- * Update code to compile if DEBUG is off
- *
- * 0.9.18 (04/28/2000) David Iacovelli
- * cleanup and test tty_register with devfs
- *
- * 0.9.17 (04/27/2000) greg kroah-hartman
- * changed tty_register around to be like the way it
- * was before, but now it works properly with devfs.
- *
- * 0.9.16 (04/26/2000) david iacovelli
- * Fixed bug in GetProductInfo()
- *
- * 0.9.15 (04/25/2000) david iacovelli
- * Updated enumeration
- *
- * 0.9.14 (04/24/2000) david iacovelli
- * Removed all config/status IOCTLS and
- * converted to using /proc/edgeport
- * still playing with devfs
- *
- * 0.9.13 (04/24/2000) david iacovelli
- * Removed configuration based on ttyUSB0
- * Added support for configuration using /prod/edgeport
- * first attempt at using devfs (not working yet!)
- * Added IOCTL to GetProductInfo()
- * Added support for custom baud rates
- * Add support for random port numbers
- *
- * 0.9.12 (04/18/2000) david iacovelli
- * added additional configuration IOCTLs
- * use ttyUSB0 for configuration
- *
- * 0.9.11 (04/17/2000) greg kroah-hartman
- * fixed module initialization race conditions.
- * made all urbs dynamically allocated.
- * made driver devfs compatible. now it only registers the tty device
- * when the device is actually plugged in.
- *
- * 0.9.10 (04/13/2000) greg kroah-hartman
- * added proc interface framework.
- *
- * 0.9.9 (04/13/2000) david iacovelli
- * added enumeration code and ioctls to configure the device
- *
- * 0.9.8 (04/12/2000) david iacovelli
- * Change interrupt read start when device is plugged in
- * and stop when device is removed
- * process interrupt reads when all ports are closed
- * (keep value of rxBytesAvail consistent with the edgeport)
- * set the USB_BULK_QUEUE flag so that we can shove a bunch
- * of urbs at once down the pipe
- *
- * 0.9.7 (04/10/2000) david iacovelli
- * start to add enumeration code.
- * generate serial number for epic devices
- * add support for kdb
- *
- * 0.9.6 (03/30/2000) david iacovelli
- * add IOCTL to get string, manufacture, and boot descriptors
- *
- * 0.9.5 (03/14/2000) greg kroah-hartman
- * more error checking added to SerialOpen to try to fix UHCI open problem
- *
- * 0.9.4 (03/09/2000) greg kroah-hartman
- * added more error checking to handle oops when data is hanging
- * around and tty is abruptly closed.
- *
- * 0.9.3 (03/09/2000) david iacovelli
- * Add epic support for xon/xoff chars
- * play with performance
- *
- * 0.9.2 (03/08/2000) greg kroah-hartman
- * changed most "info" calls to "dbg"
- * implemented flow control properly in the termios call
- *
- * 0.9.1 (03/08/2000) david iacovelli
- * added EPIC support
- * enabled bootloader update
- *
- * 0.9 (03/08/2000) greg kroah-hartman
- * Release to IO networks.
- * Integrated changes that David made
- * made getting urbs for writing SMP safe
- *
- * 0.8 (03/07/2000) greg kroah-hartman
- * Release to IO networks.
- * Fixed problems that were seen in code by David.
- * Now both Edgeport/4 and Edgeport/2 works properly.
- * Changed most of the functions to use port instead of serial.
- *
- * 0.7 (02/27/2000) greg kroah-hartman
- * Milestone 3 release.
- * Release to IO Networks
- * ioctl for waiting on line change implemented.
- * ioctl for getting statistics implemented.
- * multiport support working.
- * lsr and msr registers are now handled properly.
- * change break now hooked up and working.
- * support for all known Edgeport devices.
- *
- * 0.6 (02/22/2000) greg kroah-hartman
- * Release to IO networks.
- * CHASE is implemented correctly when port is closed.
- * SerialOpen now blocks correctly until port is fully opened.
- *
- * 0.5 (02/20/2000) greg kroah-hartman
- * Release to IO networks.
- * Known problems:
- * modem status register changes are not sent on to the user
- * CHASE is not implemented when the port is closed.
- *
- * 0.4 (02/16/2000) greg kroah-hartman
- * Second cut at the CeBit demo.
- * Doesn't leak memory on every write to the port
- * Still small leaks on startup.
- * Added support for Edgeport/2 and Edgeport/8
- *
- * 0.3 (02/15/2000) greg kroah-hartman
- * CeBit demo release.
- * Force the line settings to 4800, 8, 1, e for the demo.
- * Warning! This version leaks memory like crazy!
- *
- * 0.2 (01/30/2000) greg kroah-hartman
- * Milestone 1 release.
- * Device is found by USB subsystem, enumerated, fimware is downloaded
- * and the descriptors are printed to the debug log, config is set, and
- * green light starts to blink. Open port works, and data can be sent
- * and received at the default settings of the UART. Loopback connector
- * and debug log confirms this.
- *
- * 0.1 (01/23/2000) greg kroah-hartman
- * Initial release to help IO Networks try to set up their test system.
- * Edgeport4 is recognized, firmware is downloaded, config is set so
- * device blinks green light every 3 sec. Port is bound, but opening,
- * closing, and sending data do not work properly.
- *
*/
#include <linux/config.h>
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index e7ffe02..fad561c 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -75,10 +75,12 @@
MODULE_DEVICE_TABLE (usb, id_table_combined);
-static struct usb_serial_device_type edgeport_2port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport 2 port adapter",
- .short_name = "edgeport_2",
+static struct usb_serial_driver edgeport_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_2",
+ },
+ .description = "Edgeport 2 port adapter",
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -103,10 +105,12 @@
.write_bulk_callback = edge_bulk_out_data_callback,
};
-static struct usb_serial_device_type edgeport_4port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport 4 port adapter",
- .short_name = "edgeport_4",
+static struct usb_serial_driver edgeport_4port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_4",
+ },
+ .description = "Edgeport 4 port adapter",
.id_table = edgeport_4port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -131,10 +135,12 @@
.write_bulk_callback = edge_bulk_out_data_callback,
};
-static struct usb_serial_device_type edgeport_8port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport 8 port adapter",
- .short_name = "edgeport_8",
+static struct usb_serial_driver edgeport_8port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_8",
+ },
+ .description = "Edgeport 8 port adapter",
.id_table = edgeport_8port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index ebf9967..832b6d6 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2982,10 +2982,12 @@
}
-static struct usb_serial_device_type edgeport_1port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport TI 1 port adapter",
- .short_name = "edgeport_ti_1",
+static struct usb_serial_driver edgeport_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_ti_1",
+ },
+ .description = "Edgeport TI 1 port adapter",
.id_table = edgeport_1port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -3010,10 +3012,12 @@
.write_bulk_callback = edge_bulk_out_callback,
};
-static struct usb_serial_device_type edgeport_2port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport TI 2 port adapter",
- .short_name = "edgeport_ti_2",
+static struct usb_serial_driver edgeport_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_ti_2",
+ },
+ .description = "Edgeport TI 2 port adapter",
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 2,
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index c05c2a2..d5d0664 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -92,24 +92,7 @@
static struct usb_device_id ipaq_id_table [] = {
/* The first entry is a placeholder for the insmod-specified device */
{ USB_DEVICE(0x049F, 0x0003) },
- { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */
- { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */
- { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */
- { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */
- { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */
- { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */
- { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */
- { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */
- { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */
- { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */
{ USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */
{ USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */
{ USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */
@@ -125,7 +108,13 @@
{ USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */
{ USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */
{ USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */
- { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */
+ { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */
+ { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */
+ { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */
+ { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */
+ { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */
+ { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */
+ { USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */
{ USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */
{ USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */
{ USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */
@@ -251,17 +240,81 @@
{ USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */
{ USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */
{ USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */
- { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */
- { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
- { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */
+ { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */
+ { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */
+ { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */
+ { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */
+ { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */
+ { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */
+ { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
+ { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
+ { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */
+ { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */
+ { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */
+ { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */
+ { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */
+ { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */
+ { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */
+ { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */
+ { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */
+ { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */
+ { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */
+ { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */
+ { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */
+ { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */
+ { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */
+ { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */
+ { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */
+ { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */
+ { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */
+ { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */
+ { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */
+ { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */
+ { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */
+ { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */
+ { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */
+ { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */
+ { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */
+ { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */
+ { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */
+ { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */
+ { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */
{ USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */
{ USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */
+ { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */
{ USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */
{ USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */
- { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */
{ USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */
{ USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */
{ USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */
+ { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */
+ { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */
+ { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */
+ { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */
+ { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */
+ { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */
+ { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */
+ { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
{ USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */
@@ -422,116 +475,67 @@
{ USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */
- { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */
- { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */
- { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */
- { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */
- { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */
- { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */
{ USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */
- { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */
- { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */
- { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */
- { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */
- { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */
- { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */
- { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */
- { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */
- { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */
- { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */
- { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */
- { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */
- { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */
- { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */
- { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */
- { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */
- { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
- { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
- { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */
- { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */
- { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */
- { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */
- { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */
- { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */
- { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
- { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */
- { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */
- { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */
- { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */
- { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */
- { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */
- { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */
- { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */
- { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */
- { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */
- { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */
- { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */
- { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */
- { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */
- { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */
- { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */
- { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */
- { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */
- { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */
- { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */
{ USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */
- { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
- { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */
- { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */
- { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */
- { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */
- { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */
- { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */
- { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */
- { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */
- { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */
- { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */
- { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */
- { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */
- { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */
- { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */
- { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */
- { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */
- { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */
- { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */
- { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */
- { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */
- { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */
- { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */
- { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */
+ { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */
+ { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */
+ { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */
+ { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */
{ USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */
{ USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */
{ USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */
{ USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */
- { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */
+ { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */
+ { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */
+ { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */
+ { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */
+ { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */
+ { USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */
+ { USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */
+ { USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */
+ { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */
{ USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */
+ { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */
+ { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */
+ { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */
+ { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */
{ USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */
{ USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */
{ USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */
{ USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */
{ USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */
- { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */
- { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */
+ { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */
+ { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */
+ { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */
+ { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */
+ { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */
+ { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */
+ { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */
+ { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */
+ { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */
+ { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */
+ { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */
+ { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */
+ { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */
+ { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */
+ { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */
+ { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */
+ { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */
+ { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */
+ { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */
+ { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */
+ { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */
+ { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
+ { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
{ } /* Terminating entry */
};
@@ -547,9 +551,12 @@
/* All of the device info needed for the Compaq iPAQ */
-static struct usb_serial_device_type ipaq_device = {
- .owner = THIS_MODULE,
- .name = "PocketPC PDA",
+static struct usb_serial_driver ipaq_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ipaq",
+ },
+ .description = "PocketPC PDA",
.id_table = ipaq_id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 85e2424..a02fada 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -443,10 +443,12 @@
return 0;
}
-static struct usb_serial_device_type ipw_device = {
- .owner = THIS_MODULE,
- .name = "IPWireless converter",
- .short_name = "ipw",
+static struct usb_serial_driver ipw_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ipw",
+ },
+ .description = "IPWireless converter",
.id_table = usb_ipw_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 937b2fd..19f329e 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -133,9 +133,12 @@
};
-static struct usb_serial_device_type ir_device = {
- .owner = THIS_MODULE,
- .name = "IR Dongle",
+static struct usb_serial_driver ir_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ir-usb",
+ },
+ .description = "IR Dongle",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index e9b45b7..5cfc13b 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -570,10 +570,12 @@
};
/* Structs for the devices, pre and post renumeration. */
-static struct usb_serial_device_type keyspan_pre_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan - (without firmware)",
- .short_name = "keyspan_no_firm",
+static struct usb_serial_driver keyspan_pre_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_no_firm",
+ },
+ .description = "Keyspan - (without firmware)",
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -582,10 +584,12 @@
.attach = keyspan_fake_startup,
};
-static struct usb_serial_device_type keyspan_1port_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan 1 port adapter",
- .short_name = "keyspan_1",
+static struct usb_serial_driver keyspan_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_1",
+ },
+ .description = "Keyspan 1 port adapter",
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -607,10 +611,12 @@
.shutdown = keyspan_shutdown,
};
-static struct usb_serial_device_type keyspan_2port_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan 2 port adapter",
- .short_name = "keyspan_2",
+static struct usb_serial_driver keyspan_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_2",
+ },
+ .description = "Keyspan 2 port adapter",
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -632,10 +638,12 @@
.shutdown = keyspan_shutdown,
};
-static struct usb_serial_device_type keyspan_4port_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan 4 port adapter",
- .short_name = "keyspan_4",
+static struct usb_serial_driver keyspan_4port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_4",
+ },
+ .description = "Keyspan 4 port adapter",
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 5,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 635c384..cd4f48b 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -783,10 +783,12 @@
}
#ifdef KEYSPAN
-static struct usb_serial_device_type keyspan_pda_fake_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan PDA - (prerenumeration)",
- .short_name = "keyspan_pda_pre",
+static struct usb_serial_driver keyspan_pda_fake_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_pda_pre",
+ },
+ .description = "Keyspan PDA - (prerenumeration)",
.id_table = id_table_fake,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -797,10 +799,12 @@
#endif
#ifdef XIRCOM
-static struct usb_serial_device_type xircom_pgs_fake_device = {
- .owner = THIS_MODULE,
- .name = "Xircom / Entregra PGS - (prerenumeration)",
- .short_name = "xircom_no_firm",
+static struct usb_serial_driver xircom_pgs_fake_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "xircom_no_firm",
+ },
+ .description = "Xircom / Entregra PGS - (prerenumeration)",
.id_table = id_table_fake_xircom,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -810,10 +814,12 @@
};
#endif
-static struct usb_serial_device_type keyspan_pda_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan PDA",
- .short_name = "keyspan_pda",
+static struct usb_serial_driver keyspan_pda_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_pda",
+ },
+ .description = "Keyspan PDA",
.id_table = id_table_std,
.num_interrupt_in = 1,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index a11e829..a8951c0 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -123,10 +123,12 @@
.id_table = id_table,
};
-static struct usb_serial_device_type kl5kusb105d_device = {
- .owner = THIS_MODULE,
- .name = "KL5KUSB105D / PalmConnect",
- .short_name = "kl5kusb105d",
+static struct usb_serial_driver kl5kusb105d_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "kl5kusb105d",
+ },
+ .description = "KL5KUSB105D / PalmConnect",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index fe4c98a..9456dd9 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -105,9 +105,12 @@
};
-static struct usb_serial_device_type kobil_device = {
- .owner = THIS_MODULE,
- .name = "KOBIL USB smart card terminal",
+static struct usb_serial_driver kobil_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "kobil",
+ },
+ .description = "KOBIL USB smart card terminal",
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 50b63696..ca5dbad 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -132,10 +132,12 @@
.id_table = id_table_combined,
};
-static struct usb_serial_device_type mct_u232_device = {
- .owner = THIS_MODULE,
- .name = "MCT U232",
- .short_name = "mct_u232",
+static struct usb_serial_driver mct_u232_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mct_u232",
+ },
+ .description = "MCT U232",
.id_table = id_table_combined,
.num_interrupt_in = 2,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c
new file mode 100644
index 0000000..fad01be
--- /dev/null
+++ b/drivers/usb/serial/nokia_dku2.c
@@ -0,0 +1,142 @@
+/*
+ * Nokia DKU2 USB driver
+ *
+ * Copyright (C) 2004
+ * Author: C Kemp
+ *
+ * This program is largely derived from work by the linux-usb group
+ * and associated source files. Please see the usb/serial files for
+ * individual credits and copyrights.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de>
+ * Added short name to device structure to make driver load into kernel 2.6.13
+ *
+ * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de>
+ * Added usb_deregister to exit code - to allow remove and reinsert of module
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+
+#define NOKIA_VENDOR_ID 0x0421
+#define NOKIA7600_PRODUCT_ID 0x0400
+#define NOKIA6230_PRODUCT_ID 0x040f
+#define NOKIA6170_PRODUCT_ID 0x0416
+#define NOKIA6670_PRODUCT_ID 0x041d
+#define NOKIA6680_PRODUCT_ID 0x041e
+#define NOKIA6230i_PRODUCT_ID 0x0428
+
+#define NOKIA_AT_PORT 0x82
+#define NOKIA_FBUS_PORT 0x86
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.2"
+#define DRIVER_AUTHOR "C Kemp"
+#define DRIVER_DESC "Nokia DKU2 Driver"
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* The only thing which makes this device different from a generic
+ * device is that we have to set an alternative configuration to make
+ * the relevant endpoints available. In 2.6 this is really easy... */
+static int nokia_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ int retval = -ENODEV;
+
+ if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) {
+ /* the AT port */
+ dev_info(&serial->dev->dev, "Nokia AT Port:\n");
+ retval = 0;
+ } else if (serial->interface->num_altsetting == 2 &&
+ serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) {
+ /* the FBUS port */
+ dev_info(&serial->dev->dev, "Nokia FBUS Port:\n");
+ usb_set_interface(serial->dev, 10, 1);
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static struct usb_driver nokia_driver = {
+ .owner = THIS_MODULE,
+ .name = "nokia_dku2",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static struct usb_serial_driver nokia_serial_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "nokia_dku2",
+ },
+ .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver",
+ .id_table = id_table,
+ .num_interrupt_in = 1,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .probe = nokia_probe,
+};
+
+static int __init nokia_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&nokia_serial_driver);
+ if (retval)
+ return retval;
+
+ retval = usb_register(&nokia_driver);
+ if (retval) {
+ usb_serial_deregister(&nokia_serial_driver);
+ return retval;
+ }
+
+ info(DRIVER_VERSION " " DRIVER_AUTHOR);
+ info(DRIVER_DESC);
+
+ return retval;
+}
+
+static void __exit nokia_exit(void)
+{
+ usb_deregister(&nokia_driver);
+ usb_serial_deregister(&nokia_serial_driver);
+}
+
+module_init(nokia_init);
+module_exit(nokia_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 6a99ae1..3caf970 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -88,10 +88,12 @@
};
-static struct usb_serial_device_type zyxel_omninet_device = {
- .owner = THIS_MODULE,
- .name = "ZyXEL - omni.net lcd plus usb",
- .short_name = "omninet",
+static struct usb_serial_driver zyxel_omninet_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "omninet",
+ },
+ .description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 4989e57..7716000 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -105,10 +105,12 @@
/* The card has three separate interfaces, wich the serial driver
* recognizes separately, thus num_port=1.
*/
-static struct usb_serial_device_type option_3port_device = {
- .owner = THIS_MODULE,
- .name = "Option 3G data card",
- .short_name = "option",
+static struct usb_serial_driver option_3port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "option",
+ },
+ .description = "Option 3G data card",
.id_table = option_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3cf245b..165c119 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -8,31 +8,10 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * 2002_Mar_26 gkh
- * allowed driver to work properly if there is no tty assigned to a port
- * (this happens for serial console devices.)
- *
- * 2001_Oct_06 gkh
- * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
- *
- * 2001_Sep_19 gkh
- * Added break support.
- *
- * 2001_Aug_30 gkh
- * fixed oops in write_bulk_callback.
- *
- * 2001_Aug_28 gkh
- * reworked buffer logic to be like other usb-serial drivers. Hopefully
- * removing some reported problems.
- *
- * 2001_Jun_06 gkh
- * finished porting to 2.4 format.
- *
*/
#include <linux/config.h>
@@ -55,7 +34,6 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.12"
#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
static int debug;
@@ -175,9 +153,11 @@
/* All of the device info needed for the PL2303 SIO serial converter */
-static struct usb_serial_device_type pl2303_device = {
- .owner = THIS_MODULE,
- .name = "PL-2303",
+static struct usb_serial_driver pl2303_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pl2303",
+ },
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
@@ -1195,7 +1175,7 @@
retval = usb_register(&pl2303_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_DESC);
return 0;
failed_usb_register:
usb_serial_deregister(&pl2303_device);
@@ -1215,7 +1195,6 @@
module_exit(pl2303_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 96a1756..c22bdc0 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -92,7 +92,7 @@
MODULE_LICENSE("GPL");
#if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT)
-#abort "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT"
+#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT"
#endif
#if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR)
@@ -397,9 +397,11 @@
return 0;
}
-static struct usb_serial_device_type safe_device = {
- .owner = THIS_MODULE,
- .name = "Safe",
+static struct usb_serial_driver safe_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "safe_serial",
+ },
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 59c88de..205dbf7 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -255,9 +255,12 @@
.id_table = ti_id_table_combined,
};
-static struct usb_serial_device_type ti_1port_device = {
- .owner = THIS_MODULE,
- .name = "TI USB 3410 1 port adapter",
+static struct usb_serial_driver ti_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ti_usb_3410_5052_1",
+ },
+ .description = "TI USB 3410 1 port adapter",
.id_table = ti_id_table_3410,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -282,9 +285,12 @@
.write_bulk_callback = ti_bulk_out_callback,
};
-static struct usb_serial_device_type ti_2port_device = {
- .owner = THIS_MODULE,
- .name = "TI USB 5052 2 port adapter",
+static struct usb_serial_driver ti_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ti_usb_3410_5052_2",
+ },
+ .description = "TI USB 5052 2 port adapter",
.id_table = ti_id_table_5052,
.num_interrupt_in = 1,
.num_bulk_in = 2,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e77fbdf..0c4881d 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1,7 +1,7 @@
/*
* USB Serial Converter driver
*
- * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2000 Peter Berger (pberger@brimson.com)
* Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
*
@@ -9,316 +9,11 @@
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
- * This driver was originally based on the ACM driver by Armin Fuerst (which was
+ * This driver was originally based on the ACM driver by Armin Fuerst (which was
* based on a driver by Brad Keryan)
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * (12/10/2002) gkh
- * Split the ports off into their own struct device, and added a
- * usb-serial bus driver.
- *
- * (11/19/2002) gkh
- * removed a few #ifdefs for the generic code and cleaned up the failure
- * logic in initialization.
- *
- * (10/02/2002) gkh
- * moved the console code to console.c and out of this file.
- *
- * (06/05/2002) gkh
- * moved location of startup() call in serial_probe() until after all
- * of the port information and endpoints are initialized. This makes
- * things easier for some drivers.
- *
- * (04/10/2002) gkh
- * added serial_read_proc function which creates a
- * /proc/tty/driver/usb-serial file.
- *
- * (03/27/2002) gkh
- * Got USB serial console code working properly and merged into the main
- * version of the tree. Thanks to Randy Dunlap for the initial version
- * of this code, and for pushing me to finish it up.
- * The USB serial console works with any usb serial driver device.
- *
- * (03/21/2002) gkh
- * Moved all manipulation of port->open_count into the core. Now the
- * individual driver's open and close functions are called only when the
- * first open() and last close() is called. Making the drivers a bit
- * smaller and simpler.
- * Fixed a bug if a driver didn't have the owner field set.
- *
- * (02/26/2002) gkh
- * Moved all locking into the main serial_* functions, instead of having
- * the individual drivers have to grab the port semaphore. This should
- * reduce races.
- * Reworked the MOD_INC logic a bit to always increment and decrement, even
- * if the generic driver is being used.
- *
- * (10/10/2001) gkh
- * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
- * help prevent child drivers from accessing the device since it is now
- * gone.
- *
- * (09/13/2001) gkh
- * Moved generic driver initialize after we have registered with the USB
- * core. Thanks to Randy Dunlap for pointing this problem out.
- *
- * (07/03/2001) gkh
- * Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
- * Fixed vendor and product getting defined through the MODULE_PARM macro
- * if the Generic driver wasn't compiled in.
- * Fixed problem with generic_shutdown() not being called for drivers that
- * don't have a shutdown() function.
- *
- * (06/06/2001) gkh
- * added evil hack that is needed for the prolific pl2303 device due to the
- * crazy way its endpoints are set up.
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * 2001_02_05 gkh
- * Fixed buffer overflows bug with the generic serial driver. Thanks to
- * Todd Squires <squirest@ct0.com> for fixing this.
- *
- * (01/10/2001) gkh
- * Fixed bug where the generic serial adaptor grabbed _any_ device that was
- * offered to it.
- *
- * (12/12/2000) gkh
- * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
- * moved them to the serial_open and serial_close functions.
- * Also fixed bug with there not being a MOD_DEC for the generic driver
- * (thanks to Gary Brubaker for finding this.)
- *
- * (11/29/2000) gkh
- * Small NULL pointer initialization cleanup which saves a bit of disk image
- *
- * (11/01/2000) Adam J. Richter
- * instead of using idVendor/idProduct pairs, usb serial drivers
- * now identify their hardware interest with usb_device_id tables,
- * which they usually have anyhow for use with MODULE_DEVICE_TABLE.
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (09/11/2000) gkh
- * Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (08/28/2000) gkh
- * Added port_lock to port structure.
- * Added locks for SMP safeness to generic driver
- * Fixed the ability to open a generic device's port more than once.
- *
- * (07/23/2000) gkh
- * Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- * Modifications to allow usb-serial drivers to be modules.
- *
- * (07/03/2000) gkh
- * Added more debugging to serial_ioctl call
- *
- * (06/25/2000) gkh
- * Changed generic_write_bulk_callback to not call wake_up_interruptible
- * directly, but to have port_softint do it at a safer time.
- *
- * (06/23/2000) gkh
- * Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (05/22/2000) gkh
- * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
- * removed from the individual device source files.
- *
- * (05/03/2000) gkh
- * Added the Digi Acceleport driver from Al Borchers and Peter Berger.
- *
- * (05/02/2000) gkh
- * Changed devfs and tty register code to work properly now. This was based on
- * the ACM driver changes by Vojtech Pavlik.
- *
- * (04/27/2000) Ryan VanderBijl
- * Put calls to *_paranoia_checks into one function.
- *
- * (04/23/2000) gkh
- * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
- * Moved when the startup code printed out the devices that are supported.
- *
- * (04/19/2000) gkh
- * Added driver for ZyXEL omni.net lcd plus ISDN TA
- * Made startup info message specify which drivers were compiled in.
- *
- * (04/03/2000) gkh
- * Changed the probe process to remove the module unload races.
- * Changed where the tty layer gets initialized to have devfs work nicer.
- * Added initial devfs support.
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
- * (03/19/2000) gkh
- * Fixed oops that could happen when device was removed while a program
- * was talking to the device.
- * Removed the static urbs and now all urbs are created and destroyed
- * dynamically.
- * Reworked the internal interface. Now everything is based on the
- * usb_serial_port structure instead of the larger usb_serial structure.
- * This fixes the bug that a multiport device could not have more than
- * one port open at one time.
- *
- * (03/17/2000) gkh
- * Added config option for debugging messages.
- * Added patch for keyspan pda from Brian Warner.
- *
- * (03/06/2000) gkh
- * Added the keyspan pda code from Brian Warner <warner@lothar.com>
- * Moved a bunch of the port specific stuff into its own structure. This
- * is in anticipation of the true multiport devices (there's a bug if you
- * try to access more than one port of any multiport device right now)
- *
- * (02/21/2000) gkh
- * Made it so that any serial devices only have to specify which functions
- * they want to overload from the generic function calls (great,
- * inheritance in C, in a driver, just what I wanted...)
- * Added support for set_termios and ioctl function calls. No drivers take
- * advantage of this yet.
- * Removed the #ifdef MODULE, now there is no module specific code.
- * Cleaned up a few comments in usb-serial.h that were wrong (thanks again
- * to Miles Lott).
- * Small fix to get_free_serial.
- *
- * (02/14/2000) gkh
- * Removed the Belkin and Peracom functionality from the driver due to
- * the lack of support from the vendor, and me not wanting people to
- * accidenatly buy the device, expecting it to work with Linux.
- * Added read_bulk_callback and write_bulk_callback to the type structure
- * for the needs of the FTDI and WhiteHEAT driver.
- * Changed all reverences to FTDI to FTDI_SIO at the request of Bill
- * Ryder.
- * Changed the output urb size back to the max endpoint size to make
- * the ftdi_sio driver have it easier, and due to the fact that it didn't
- * really increase the speed any.
- *
- * (02/11/2000) gkh
- * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
- * patch from Miles Lott (milos@insync.net).
- * Fixed bug with not restoring the minor range that a device grabs, if
- * the startup function fails (thanks Miles for finding this).
- *
- * (02/05/2000) gkh
- * Added initial framework for the Keyspan PDA serial converter so that
- * Brian Warner has a place to put his code.
- * Made the ezusb specific functions generic enough that different
- * devices can use them (whiteheat and keyspan_pda both need them).
- * Split out a whole bunch of structure and other stuff to a separate
- * usb-serial.h file.
- * Made the Visor connection messages a little more understandable, now
- * that Miles Lott (milos@insync.net) has gotten the Generic channel to
- * work. Also made them always show up in the log file.
- *
- * (01/25/2000) gkh
- * Added initial framework for FTDI serial converter so that Bill Ryder
- * has a place to put his code.
- * Added the vendor specific info from Handspring. Now we can print out
- * informational debug messages as well as understand what is happening.
- *
- * (01/23/2000) gkh
- * Fixed problem of crash when trying to open a port that didn't have a
- * device assigned to it. Made the minor node finding a little smarter,
- * now it looks to find a continuous space for the new device.
- *
- * (01/21/2000) gkh
- * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
- * Fixed get_serial_by_minor which was all messed up for multi port
- * devices. Fixed multi port problem for generic devices. Now the number
- * of ports is determined by the number of bulk out endpoints for the
- * generic device.
- *
- * (01/19/2000) gkh
- * Removed lots of cruft that was around from the old (pre urb) driver
- * interface.
- * Made the serial_table dynamic. This should save lots of memory when
- * the number of minor nodes goes up to 256.
- * Added initial support for devices that have more than one port.
- * Added more debugging comments for the Visor, and added a needed
- * set_configuration call.
- *
- * (01/17/2000) gkh
- * Fixed the WhiteHEAT firmware (my processing tool had a bug)
- * and added new debug loader firmware for it.
- * Removed the put_char function as it isn't really needed.
- * Added visor startup commands as found by the Win98 dump.
- *
- * (01/13/2000) gkh
- * Fixed the vendor id for the generic driver to the one I meant it to be.
- *
- * (01/12/2000) gkh
- * Forget the version numbering...that's pretty useless...
- * Made the driver able to be compiled so that the user can select which
- * converter they want to use. This allows people who only want the Visor
- * support to not pay the memory size price of the WhiteHEAT.
- * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
- * grabbed the root hub. Not good.
- *
- * version 0.4.0 (01/10/2000) gkh
- * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
- * device. Added startup function to allow firmware to be downloaded to
- * a device if it needs to be.
- * Added firmware download logic to the WhiteHEAT device.
- * Started to add #defines to split up the different drivers for potential
- * configuration option.
- *
- * version 0.3.1 (12/30/99) gkh
- * Fixed problems with urb for bulk out.
- * Added initial support for multiple sets of endpoints. This enables
- * the Handspring Visor to be attached successfully. Only the first
- * bulk in / bulk out endpoint pair is being used right now.
- *
- * version 0.3.0 (12/27/99) gkh
- * Added initial support for the Handspring Visor based on a patch from
- * Miles Lott (milos@sneety.insync.net)
- * Cleaned up the code a bunch and converted over to using urbs only.
- *
- * version 0.2.3 (12/21/99) gkh
- * Added initial support for the Connect Tech WhiteHEAT converter.
- * Incremented the number of ports in expectation of getting the
- * WhiteHEAT to work properly (4 ports per connection).
- * Added notification on insertion and removal of what port the
- * device is/was connected to (and what kind of device it was).
- *
- * version 0.2.2 (12/16/99) gkh
- * Changed major number to the new allocated number. We're legal now!
- *
- * version 0.2.1 (12/14/99) gkh
- * Fixed bug that happens when device node is opened when there isn't a
- * device attached to it. Thanks to marek@webdesign.no for noticing this.
- *
- * version 0.2.0 (11/10/99) gkh
- * Split up internals to make it easier to add different types of serial
- * converters to the code.
- * Added a "generic" driver that gets it's vendor and product id
- * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
- * for the idea and sample code (from the usb scanner driver.)
- * Cleared up any licensing questions by releasing it under the GNU GPL.
- *
- * version 0.1.2 (10/25/99) gkh
- * Fixed bug in detecting device.
- *
- * version 0.1.1 (10/05/99) gkh
- * Changed the major number to not conflict with anything else.
- *
- * version 0.1 (09/28/99) gkh
- * Can recognize the two different devices and start up a read from
- * device when asked to. Writes also work. No control signals yet, this
- * all is vendor specific data (i.e. no spec), also no control for
- * different baud rates or other bit settings.
- * Currently we are using the same devid as the acm driver. This needs
- * to change.
- *
*/
#include <linux/config.h>
@@ -342,7 +37,6 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v2.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
#define DRIVER_DESC "USB Serial Driver core"
@@ -427,7 +121,7 @@
serial = to_usb_serial(kref);
- dbg ("%s - %s", __FUNCTION__, serial->type->name);
+ dbg("%s - %s", __FUNCTION__, serial->type->description);
serial->type->shutdown(serial);
@@ -507,7 +201,7 @@
/* lock this module before we call it
* this may fail, which means we must bail out,
* safe because we are called with BKL held */
- if (!try_module_get(serial->type->owner)) {
+ if (!try_module_get(serial->type->driver.owner)) {
retval = -ENODEV;
goto bailout_kref_put;
}
@@ -522,7 +216,7 @@
return 0;
bailout_module_put:
- module_put(serial->type->owner);
+ module_put(serial->type->driver.owner);
bailout_kref_put:
kref_put(&serial->kref, destroy_serial);
port->open_count = 0;
@@ -553,7 +247,7 @@
port->tty = NULL;
}
- module_put(port->serial->type->owner);
+ module_put(port->serial->type->driver.owner);
}
kref_put(&port->serial->kref, destroy_serial);
@@ -711,16 +405,16 @@
char tmp[40];
dbg("%s", __FUNCTION__);
- length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION);
+ length += sprintf (page, "usbserinfo:1.0 driver:2.0\n");
for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
serial = usb_serial_get_by_index(i);
if (serial == NULL)
continue;
length += sprintf (page+length, "%d:", i);
- if (serial->type->owner)
- length += sprintf (page+length, " module:%s", module_name(serial->type->owner));
- length += sprintf (page+length, " name:\"%s\"", serial->type->name);
+ if (serial->type->driver.owner)
+ length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner));
+ length += sprintf (page+length, " name:\"%s\"", serial->type->description);
length += sprintf (page+length, " vendor:%04x product:%04x",
le16_to_cpu(serial->dev->descriptor.idVendor),
le16_to_cpu(serial->dev->descriptor.idProduct));
@@ -823,7 +517,7 @@
static struct usb_serial * create_serial (struct usb_device *dev,
struct usb_interface *interface,
- struct usb_serial_device_type *type)
+ struct usb_serial_driver *driver)
{
struct usb_serial *serial;
@@ -834,22 +528,22 @@
}
memset (serial, 0, sizeof(*serial));
serial->dev = usb_get_dev(dev);
- serial->type = type;
+ serial->type = driver;
serial->interface = interface;
kref_init(&serial->kref);
return serial;
}
-static struct usb_serial_device_type *search_serial_device(struct usb_interface *iface)
+static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
{
struct list_head *p;
const struct usb_device_id *id;
- struct usb_serial_device_type *t;
+ struct usb_serial_driver *t;
/* List trough know devices and see if the usb id matches */
list_for_each(p, &usb_serial_driver_list) {
- t = list_entry(p, struct usb_serial_device_type, driver_list);
+ t = list_entry(p, struct usb_serial_driver, driver_list);
id = usb_match_id(iface, t->id_table);
if (id != NULL) {
dbg("descriptor matches");
@@ -872,7 +566,7 @@
struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
- struct usb_serial_device_type *type = NULL;
+ struct usb_serial_driver *type = NULL;
int retval;
int minor;
int buffer_size;
@@ -900,7 +594,7 @@
if (type->probe) {
const struct usb_device_id *id;
- if (!try_module_get(type->owner)) {
+ if (!try_module_get(type->driver.owner)) {
dev_err(&interface->dev, "module get failed, exiting\n");
kfree (serial);
return -EIO;
@@ -908,7 +602,7 @@
id = usb_match_id(interface, type->id_table);
retval = type->probe(serial, id);
- module_put(type->owner);
+ module_put(type->driver.owner);
if (retval) {
dbg ("sub driver rejected device");
@@ -992,7 +686,7 @@
#endif
/* found all that we need */
- dev_info(&interface->dev, "%s converter detected\n", type->name);
+ dev_info(&interface->dev, "%s converter detected\n", type->description);
#ifdef CONFIG_USB_SERIAL_GENERIC
if (type == &usb_serial_generic_device) {
@@ -1007,13 +701,13 @@
if (!num_ports) {
/* if this device type has a calc_num_ports function, call it */
if (type->calc_num_ports) {
- if (!try_module_get(type->owner)) {
+ if (!try_module_get(type->driver.owner)) {
dev_err(&interface->dev, "module get failed, exiting\n");
kfree (serial);
return -EIO;
}
num_ports = type->calc_num_ports (serial);
- module_put(type->owner);
+ module_put(type->driver.owner);
}
if (!num_ports)
num_ports = type->num_ports;
@@ -1158,12 +852,12 @@
/* if this device type has an attach function, call it */
if (type->attach) {
- if (!try_module_get(type->owner)) {
+ if (!try_module_get(type->driver.owner)) {
dev_err(&interface->dev, "module get failed, exiting\n");
goto probe_error;
}
retval = type->attach (serial);
- module_put(type->owner);
+ module_put(type->driver.owner);
if (retval < 0)
goto probe_error;
if (retval > 0) {
@@ -1330,7 +1024,7 @@
goto exit_generic;
}
- info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_DESC);
return result;
@@ -1375,7 +1069,7 @@
} \
} while (0)
-static void fixup_generic(struct usb_serial_device_type *device)
+static void fixup_generic(struct usb_serial_driver *device)
{
set_to_generic_if_null(device, open);
set_to_generic_if_null(device, write);
@@ -1387,30 +1081,33 @@
set_to_generic_if_null(device, shutdown);
}
-int usb_serial_register(struct usb_serial_device_type *new_device)
+int usb_serial_register(struct usb_serial_driver *driver)
{
int retval;
- fixup_generic(new_device);
+ fixup_generic(driver);
+
+ if (!driver->description)
+ driver->description = driver->driver.name;
/* Add this device to our list of devices */
- list_add(&new_device->driver_list, &usb_serial_driver_list);
+ list_add(&driver->driver_list, &usb_serial_driver_list);
- retval = usb_serial_bus_register(new_device);
+ retval = usb_serial_bus_register(driver);
if (retval) {
- err("problem %d when registering driver %s", retval, new_device->name);
- list_del(&new_device->driver_list);
+ err("problem %d when registering driver %s", retval, driver->description);
+ list_del(&driver->driver_list);
}
else
- info("USB Serial support registered for %s", new_device->name);
+ info("USB Serial support registered for %s", driver->description);
return retval;
}
-void usb_serial_deregister(struct usb_serial_device_type *device)
+void usb_serial_deregister(struct usb_serial_driver *device)
{
- info("USB Serial deregistering driver %s", device->name);
+ info("USB Serial deregistering driver %s", device->description);
list_del(&device->driver_list);
usb_serial_bus_deregister(device);
}
@@ -1429,7 +1126,6 @@
/* Module information */
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_VERSION( DRIVER_VERSION );
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
index 57f92f0..238a5a8 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/drivers/usb/serial/usb-serial.h
@@ -1,53 +1,13 @@
/*
* USB Serial Converter driver
*
- * Copyright (C) 1999 - 2004
+ * Copyright (C) 1999 - 2005
* Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- *
- * (03/26/2002) gkh
- * removed the port->tty check from port_paranoia_check() due to serial
- * consoles not having a tty device assigned to them.
- *
- * (12/03/2001) gkh
- * removed active from the port structure.
- * added documentation to the usb_serial_device_type structure
- *
- * (10/10/2001) gkh
- * added vendor and product to serial structure. Needed to determine device
- * owner when the device is disconnected.
- *
- * (05/30/2001) gkh
- * added sem to port structure and removed port_lock
- *
- * (10/05/2000) gkh
- * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
- * fix bug with urb->dev not being set properly, now that the usb core
- * needs it.
- *
- * (09/11/2000) gkh
- * Added usb_serial_debug_data function to help get rid of #DEBUG in the
- * drivers.
- *
- * (08/28/2000) gkh
- * Added port_lock to port structure.
- *
- * (08/08/2000) gkh
- * Added open_count to port structure.
- *
- * (07/23/2000) gkh
- * Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- * Modifications to allow usb-serial drivers to be modules.
- *
- *
*/
@@ -143,7 +103,7 @@
/**
* usb_serial - structure used by the usb-serial core for a device
* @dev: pointer to the struct usb_device for this device
- * @type: pointer to the struct usb_serial_device_type for this device
+ * @type: pointer to the struct usb_serial_driver for this device
* @interface: pointer to the struct usb_interface for this device
* @minor: the starting minor number for this device
* @num_ports: the number of ports this device has
@@ -159,7 +119,7 @@
*/
struct usb_serial {
struct usb_device * dev;
- struct usb_serial_device_type * type;
+ struct usb_serial_driver * type;
struct usb_interface * interface;
unsigned char minor;
unsigned char num_ports;
@@ -188,13 +148,9 @@
}
/**
- * usb_serial_device_type - a structure that defines a usb serial device
- * @owner: pointer to the module that owns this device.
- * @name: pointer to a string that describes this device. This string used
+ * usb_serial_driver - describes a usb serial driver
+ * @description: pointer to a string that describes this driver. This string used
* in the syslog messages when a device is inserted or removed.
- * @short_name: a pointer to a string that describes this device in
- * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface
- * to describe the driver.
* @id_table: pointer to a list of usb_device_id structures that define all
* of the devices this structure can support.
* @num_interrupt_in: the number of interrupt in endpoints this device will
@@ -221,16 +177,19 @@
* @shutdown: pointer to the driver's shutdown function. This will be
* called when the device is removed from the system.
*
- * This structure is defines a USB Serial device. It provides all of
+ * This structure is defines a USB Serial driver. It provides all of
* the information that the USB serial core code needs. If the function
* pointers are defined, then the USB serial core code will call them when
* the corresponding tty port functions are called. If they are not
* called, the generic serial function will be used instead.
+ *
+ * The driver.owner field should be set to the module owner of this driver.
+ * The driver.name field should be set to the name of this driver (remember
+ * it will show up in sysfs, so it needs to be short and to the point.
+ * Useing the module name is a good idea.)
*/
-struct usb_serial_device_type {
- struct module *owner;
- char *name;
- char *short_name;
+struct usb_serial_driver {
+ const char *description;
const struct usb_device_id *id_table;
char num_interrupt_in;
char num_interrupt_out;
@@ -269,10 +228,10 @@
void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
};
-#define to_usb_serial_driver(d) container_of(d, struct usb_serial_device_type, driver)
+#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
-extern int usb_serial_register(struct usb_serial_device_type *new_device);
-extern void usb_serial_deregister(struct usb_serial_device_type *device);
+extern int usb_serial_register(struct usb_serial_driver *driver);
+extern void usb_serial_deregister(struct usb_serial_driver *driver);
extern void usb_serial_port_softint(void *private);
extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
@@ -303,10 +262,10 @@
extern int usb_serial_generic_register (int debug);
extern void usb_serial_generic_deregister (void);
-extern int usb_serial_bus_register (struct usb_serial_device_type *device);
-extern void usb_serial_bus_deregister (struct usb_serial_device_type *device);
+extern int usb_serial_bus_register (struct usb_serial_driver *device);
+extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
-extern struct usb_serial_device_type usb_serial_generic_device;
+extern struct usb_serial_driver usb_serial_generic_device;
extern struct bus_type usb_serial_bus_type;
extern struct tty_driver *usb_serial_tty_driver;
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 31c57ad..a473c1c 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -7,139 +7,10 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * (06/03/2003) Judd Montgomery <judd at jpilot.org>
- * Added support for module parameter options for untested/unknown
- * devices.
- *
- * (03/09/2003) gkh
- * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
- * <brachtl@redgrep.cz> for the information.
- *
- * (03/05/2003) gkh
- * Think Treo support is now working.
- *
- * (04/03/2002) gkh
- * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
- * <hiro@zob.ne.jp> for the information.
- *
- * (03/27/2002) gkh
- * Removed assumptions that port->tty was always valid (is not true
- * for usb serial console devices.)
- *
- * (03/23/2002) gkh
- * Added support for the Palm i705 device, thanks to Thomas Riemer
- * <tom@netmech.com> for the information.
- *
- * (03/21/2002) gkh
- * Added support for the Palm m130 device, thanks to Udo Eisenbarth
- * <udo.eisenbarth@web.de> for the information.
- *
- * (02/27/2002) gkh
- * Reworked the urb handling logic. We have no more pool, but dynamically
- * allocate the urb and the transfer buffer on the fly. In testing this
- * does not incure any measurable overhead. This also relies on the fact
- * that we have proper reference counting logic for urbs.
- *
- * (02/21/2002) SilaS
- * Added initial support for the Palm m515 devices.
- *
- * (02/14/2002) gkh
- * Added support for the Clie S-360 device.
- *
- * (12/18/2001) gkh
- * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
- * for the patch.
- *
- * (11/11/2001) gkh
- * Added support for the m125 devices, and added check to prevent oopses
- * for Clié devices that lie about the number of ports they have.
- *
- * (08/30/2001) gkh
- * Added support for the Clie devices, both the 3.5 and 4.0 os versions.
- * Many thanks to Daniel Burke, and Bryan Payne for helping with this.
- *
- * (08/23/2001) gkh
- * fixed a few potential bugs pointed out by Oliver Neukum.
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (05/28/2000) gkh
- * Added initial support for the Palm m500 and Palm m505 devices.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * (01/21/2000) gkh
- * Added write_room and chars_in_buffer, as they were previously using the
- * generic driver versions which is all wrong now that we are using an urb
- * pool. Thanks to Wolfgang Grandegger for pointing this out to me.
- * Removed count assignment in the write function, which was not needed anymore
- * either. Thanks to Al Borchers for pointing this out.
- *
- * (12/12/2000) gkh
- * Moved MOD_DEC to end of visor_close to be nicer, as the final write
- * message can sleep.
- *
- * (11/12/2000) gkh
- * Fixed bug with data being dropped on the floor by forcing tty->low_latency
- * to be on. Hopefully this fixes the OHCI issue!
- *
- * (11/01/2000) Adam J. Richter
- * usb_device_id table support
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (09/11/2000) gkh
- * Got rid of always calling kmalloc for every urb we wrote out to the
- * device.
- * Added visor_read_callback so we can keep track of bytes in and out for
- * those people who like to know the speed of their device.
- * Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (09/06/2000) gkh
- * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
- * the host controller drivers set urb->dev = NULL when the urb is finished.
- *
- * (08/28/2000) gkh
- * Added locks for SMP safeness.
- *
- * (08/08/2000) gkh
- * Fixed endian problem in visor_startup.
- * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- * than once.
- *
- * (07/23/2000) gkh
- * Added pool of write urbs to speed up transfers to the visor.
- *
- * (07/19/2000) gkh
- * Added module_init and module_exit functions to handle the fact that this
- * driver is a loadable module now.
- *
- * (07/03/2000) gkh
- * Added visor_set_ioctl and visor_set_termios functions (they don't do much
- * of anything, but are good for debugging.)
- *
- * (06/25/2000) gkh
- * Fixed bug in visor_unthrottle that should help with the disconnect in PPP
- * bug that people have been reporting.
- *
- * (06/23/2000) gkh
- * Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (04/27/2000) Ryan VanderBijl
- * Fixed memory leak in visor_close
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
*/
#include <linux/config.h>
@@ -161,7 +32,6 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v2.1"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
@@ -311,10 +181,12 @@
};
/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
-static struct usb_serial_device_type handspring_device = {
- .owner = THIS_MODULE,
- .name = "Handspring Visor / Palm OS",
- .short_name = "visor",
+static struct usb_serial_driver handspring_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "visor",
+ },
+ .description = "Handspring Visor / Palm OS",
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
@@ -339,10 +211,12 @@
};
/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
-static struct usb_serial_device_type clie_5_device = {
- .owner = THIS_MODULE,
- .name = "Sony Clie 5.0",
- .short_name = "clie_5",
+static struct usb_serial_driver clie_5_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "clie_5",
+ },
+ .description = "Sony Clie 5.0",
.id_table = clie_id_5_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
@@ -367,10 +241,12 @@
};
/* device info for the Sony Clie OS version 3.5 */
-static struct usb_serial_device_type clie_3_5_device = {
- .owner = THIS_MODULE,
- .name = "Sony Clie 3.5",
- .short_name = "clie_3.5",
+static struct usb_serial_driver clie_3_5_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "clie_3.5",
+ },
+ .description = "Sony Clie 3.5",
.id_table = clie_id_3_5_table,
.num_interrupt_in = 0,
.num_bulk_in = 1,
@@ -782,7 +658,7 @@
break;
}
dev_info(dev, "%s: port %d, is for %s use\n",
- serial->type->name,
+ serial->type->description,
connection_info->connections[i].port, string);
}
}
@@ -791,11 +667,11 @@
*/
if (num_ports == 0 || num_ports > 2) {
dev_warn (dev, "%s: No valid connect info available\n",
- serial->type->name);
+ serial->type->description);
num_ports = 2;
}
- dev_info(dev, "%s: Number of ports: %d\n", serial->type->name,
+ dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
num_ports);
/*
@@ -1125,7 +1001,7 @@
retval = usb_register(&visor_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_DESC);
return 0;
failed_usb_register:
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index cf3bc30..18c3183 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -156,10 +156,12 @@
static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs);
static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs);
-static struct usb_serial_device_type whiteheat_fake_device = {
- .owner = THIS_MODULE,
- .name = "Connect Tech - WhiteHEAT - (prerenumeration)",
- .short_name = "whiteheatnofirm",
+static struct usb_serial_driver whiteheat_fake_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "whiteheatnofirm",
+ },
+ .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
.id_table = id_table_prerenumeration,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -169,10 +171,12 @@
.attach = whiteheat_firmware_attach,
};
-static struct usb_serial_device_type whiteheat_device = {
- .owner = THIS_MODULE,
- .name = "Connect Tech - WhiteHEAT",
- .short_name = "whiteheat",
+static struct usb_serial_driver whiteheat_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "whiteheat",
+ },
+ .description = "Connect Tech - WhiteHEAT",
.id_table = id_table_std,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -382,10 +386,10 @@
usb_clear_halt(serial->dev, pipe);
ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't send command [%d]", serial->type->name, ret);
+ err("%s: Couldn't send command [%d]", serial->type->description, ret);
goto no_firmware;
} else if (alen != sizeof(command)) {
- err("%s: Send command incomplete [%d]", serial->type->name, alen);
+ err("%s: Send command incomplete [%d]", serial->type->description, alen);
goto no_firmware;
}
@@ -394,19 +398,19 @@
usb_clear_halt(serial->dev, pipe);
ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't get results [%d]", serial->type->name, ret);
+ err("%s: Couldn't get results [%d]", serial->type->description, ret);
goto no_firmware;
} else if (alen != sizeof(result)) {
- err("%s: Get results incomplete [%d]", serial->type->name, alen);
+ err("%s: Get results incomplete [%d]", serial->type->description, alen);
goto no_firmware;
} else if (result[0] != command[0]) {
- err("%s: Command failed [%d]", serial->type->name, result[0]);
+ err("%s: Command failed [%d]", serial->type->description, result[0]);
goto no_firmware;
}
hw_info = (struct whiteheat_hw_info *)&result[1];
- info("%s: Driver %s: Firmware v%d.%02d", serial->type->name,
+ info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
for (i = 0; i < serial->num_ports; i++) {
@@ -414,7 +418,7 @@
info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
if (info == NULL) {
- err("%s: Out of memory for port structures\n", serial->type->name);
+ err("%s: Out of memory for port structures\n", serial->type->description);
goto no_private;
}
@@ -484,7 +488,7 @@
command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
if (command_info == NULL) {
- err("%s: Out of memory for port structures\n", serial->type->name);
+ err("%s: Out of memory for port structures\n", serial->type->description);
goto no_command_private;
}
@@ -501,9 +505,9 @@
no_firmware:
/* Firmware likely not running */
- err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name);
- err("%s: If the firmware is not running (status led not blinking)\n", serial->type->name);
- err("%s: please contact support@connecttech.com\n", serial->type->name);
+ err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
+ err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
+ err("%s: please contact support@connecttech.com\n", serial->type->description);
return -ENODEV;
no_command_private:
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index bb9819c..1a9679f 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -2,7 +2,8 @@
# USB Storage driver configuration
#
-comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information"
+comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
+comment "may also be needed; see USB_STORAGE Help for more information"
depends on USB
config USB_STORAGE
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 2c9402d..89401a5 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -5,7 +5,7 @@
* Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
*
* Initial work by:
- * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
+ * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
*
* Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
*
@@ -46,7 +46,7 @@
struct usb_onetouch {
char name[128];
char phys[64];
- struct input_dev dev; /* input device interface */
+ struct input_dev *dev; /* input device interface */
struct usb_device *udev; /* usb device */
struct urb *irq; /* urb for interrupt in report */
@@ -58,7 +58,7 @@
{
struct usb_onetouch *onetouch = urb->context;
signed char *data = onetouch->data;
- struct input_dev *dev = &onetouch->dev;
+ struct input_dev *dev = onetouch->dev;
int status;
switch (urb->status) {
@@ -74,11 +74,9 @@
}
input_regs(dev, regs);
-
- input_report_key(&onetouch->dev, ONETOUCH_BUTTON,
- data[0] & 0x02);
-
+ input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02);
input_sync(dev);
+
resubmit:
status = usb_submit_urb (urb, SLAB_ATOMIC);
if (status)
@@ -113,8 +111,8 @@
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_onetouch *onetouch;
+ struct input_dev *input_dev;
int pipe, maxp;
- char path[64];
interface = ss->pusb_intf->cur_altsetting;
@@ -122,62 +120,62 @@
return -ENODEV;
endpoint = &interface->endpoint[2].desc;
- if(!(endpoint->bEndpointAddress & USB_DIR_IN))
+ if (!(endpoint->bEndpointAddress & USB_DIR_IN))
return -ENODEV;
- if((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_INT)
return -ENODEV;
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- if (!(onetouch = kcalloc(1, sizeof(struct usb_onetouch), GFP_KERNEL)))
- return -ENOMEM;
+ onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!onetouch || !input_dev)
+ goto fail1;
onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
SLAB_ATOMIC, &onetouch->data_dma);
- if (!onetouch->data){
- kfree(onetouch);
- return -ENOMEM;
- }
+ if (!onetouch->data)
+ goto fail1;
onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!onetouch->irq){
- kfree(onetouch);
- usb_buffer_free(udev, ONETOUCH_PKT_LEN,
- onetouch->data, onetouch->data_dma);
- return -ENODEV;
- }
-
+ if (!onetouch->irq)
+ goto fail2;
onetouch->udev = udev;
-
- set_bit(EV_KEY, onetouch->dev.evbit);
- set_bit(ONETOUCH_BUTTON, onetouch->dev.keybit);
- clear_bit(0, onetouch->dev.keybit);
-
- onetouch->dev.private = onetouch;
- onetouch->dev.open = usb_onetouch_open;
- onetouch->dev.close = usb_onetouch_close;
-
- usb_make_path(udev, path, sizeof(path));
- sprintf(onetouch->phys, "%s/input0", path);
-
- onetouch->dev.name = onetouch->name;
- onetouch->dev.phys = onetouch->phys;
-
- usb_to_input_id(udev, &onetouch->dev.id);
-
- onetouch->dev.dev = &udev->dev;
+ onetouch->dev = input_dev;
if (udev->manufacturer)
- strcat(onetouch->name, udev->manufacturer);
- if (udev->product)
- sprintf(onetouch->name, "%s %s", onetouch->name,
- udev->product);
+ strlcpy(onetouch->name, udev->manufacturer,
+ sizeof(onetouch->name));
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(onetouch->name, " ", sizeof(onetouch->name));
+ strlcat(onetouch->name, udev->product, sizeof(onetouch->name));
+ }
+
if (!strlen(onetouch->name))
- sprintf(onetouch->name, "Maxtor Onetouch %04x:%04x",
- onetouch->dev.id.vendor, onetouch->dev.id.product);
+ snprintf(onetouch->name, sizeof(onetouch->name),
+ "Maxtor Onetouch %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys));
+ strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys));
+
+ input_dev->name = onetouch->name;
+ input_dev->phys = onetouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &udev->dev;
+
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(ONETOUCH_BUTTON, input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+
+ input_dev->private = onetouch;
+ input_dev->open = usb_onetouch_open;
+ input_dev->close = usb_onetouch_close;
usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data,
(maxp > 8 ? 8 : maxp),
@@ -188,10 +186,15 @@
ss->extra_destructor = onetouch_release_input;
ss->extra = onetouch;
- input_register_device(&onetouch->dev);
- printk(KERN_INFO "usb-input: %s on %s\n", onetouch->dev.name, path);
+ input_register_device(onetouch->dev);
return 0;
+
+ fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ fail1: kfree(onetouch);
+ input_free_device(input_dev);
+ return -ENOMEM;
}
void onetouch_release_input(void *onetouch_)
@@ -200,11 +203,9 @@
if (onetouch) {
usb_kill_urb(onetouch->irq);
- input_unregister_device(&onetouch->dev);
+ input_unregister_device(onetouch->dev);
usb_free_urb(onetouch->irq);
usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN,
onetouch->data, onetouch->data_dma);
- printk(KERN_INFO "usb-input: deregistering %s\n",
- onetouch->dev.name);
}
}
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 356342c..33c55a6 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1,4 +1,4 @@
-/* Driver for SCM Microsystems USB-ATAPI cable
+/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
*
* $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $
*
@@ -67,10 +67,10 @@
static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
/*
- * Convenience function to produce an ATAPI read/write sectors command
+ * Convenience function to produce an ATA read/write sectors command
* Use cmd=0x20 for read, cmd=0x30 for write
*/
-static void usbat_pack_atapi_sector_cmd(unsigned char *buf,
+static void usbat_pack_ata_sector_cmd(unsigned char *buf,
unsigned char thistime,
u32 sector, unsigned char cmd)
{
@@ -196,10 +196,12 @@
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok)
+ /* error/check condition (0x51 is ok) */
+ if (*reply & 0x01 && *reply != 0x51)
return USB_STOR_TRANSPORT_FAILED;
- if (*reply & 0x20) // device fault
+ /* device fault */
+ if (*reply & 0x20)
return USB_STOR_TRANSPORT_FAILED;
return USB_STOR_TRANSPORT_GOOD;
@@ -222,29 +224,39 @@
command[0] = 0x40;
command[1] = USBAT_CMD_SET_FEAT;
- // The only bit relevant to ATA access is bit 6
- // which defines 8 bit data access (set) or 16 bit (unset)
+ /*
+ * The only bit relevant to ATA access is bit 6
+ * which defines 8 bit data access (set) or 16 bit (unset)
+ */
command[2] = epp_control;
- // If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
- // ET1 and ET2 define an external event to be checked for on event of a
- // _read_blocks or _write_blocks operation. The read/write will not take
- // place unless the defined trigger signal is active.
+ /*
+ * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
+ * ET1 and ET2 define an external event to be checked for on event of a
+ * _read_blocks or _write_blocks operation. The read/write will not take
+ * place unless the defined trigger signal is active.
+ */
command[3] = external_trigger;
- // The resultant byte of the mask operation (see mask_byte) is compared for
- // equivalence with this test pattern. If equal, the read/write will take
- // place.
+ /*
+ * The resultant byte of the mask operation (see mask_byte) is compared for
+ * equivalence with this test pattern. If equal, the read/write will take
+ * place.
+ */
command[4] = test_pattern;
- // This value is logically ANDed with the status register field specified
- // in the read/write command.
+ /*
+ * This value is logically ANDed with the status register field specified
+ * in the read/write command.
+ */
command[5] = mask_byte;
- // If ALQ is set in the qualifier, this field contains the address of the
- // registers where the byte count should be read for transferring the data.
- // If ALQ is not set, then this field contains the number of bytes to be
- // transferred.
+ /*
+ * If ALQ is set in the qualifier, this field contains the address of the
+ * registers where the byte count should be read for transferring the data.
+ * If ALQ is not set, then this field contains the number of bytes to be
+ * transferred.
+ */
command[6] = subcountL;
command[7] = subcountH;
@@ -273,26 +285,26 @@
if (result!=USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- if (*status & 0x01) { // check condition
+ if (*status & 0x01) { /* check condition */
result = usbat_read(us, USBAT_ATA, 0x10, status);
return USB_STOR_TRANSPORT_FAILED;
}
- if (*status & 0x20) // device fault
+ if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED;
- if ((*status & 0x80)==0x00) { // not busy
+ if ((*status & 0x80)==0x00) { /* not busy */
US_DEBUGP("Waited not busy for %d steps\n", i);
return USB_STOR_TRANSPORT_GOOD;
}
if (i<500)
- msleep(10); // 5 seconds
+ msleep(10); /* 5 seconds */
else if (i<700)
- msleep(50); // 10 seconds
+ msleep(50); /* 10 seconds */
else if (i<1200)
- msleep(100); // 50 seconds
+ msleep(100); /* 50 seconds */
else
- msleep(1000); // X minutes
+ msleep(1000); /* X minutes */
}
US_DEBUGP("Waited not busy for %d minutes, timing out.\n",
@@ -412,9 +424,12 @@
if (i==0) {
cmdlen = 16;
- // Write to multiple registers
- // Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here,
- // but that's what came out of the trace every single time.
+ /*
+ * Write to multiple registers
+ * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
+ * necessary here, but that's what came out of the
+ * trace every single time.
+ */
command[0] = 0x40;
command[1] = access | USBAT_CMD_WRITE_REGS;
command[2] = 0x07;
@@ -426,7 +441,7 @@
} else
cmdlen = 8;
- // Conditionally read or write blocks
+ /* Conditionally read or write blocks */
command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
command[cmdlen-7] = access |
(direction==DMA_TO_DEVICE ?
@@ -456,11 +471,6 @@
}
-
- //US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n",
- // direction == DMA_TO_DEVICE ? "out" : "in",
- // len, use_sg);
-
result = usb_stor_bulk_transfer_sg(us,
pipe, content, len, use_sg, NULL);
@@ -508,9 +518,9 @@
if (result!=USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- if (*status & 0x01) // check condition
+ if (*status & 0x01) /* check condition */
return USB_STOR_TRANSPORT_FAILED;
- if (*status & 0x20) // device fault
+ if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED;
US_DEBUGP("Redoing %s\n",
@@ -547,32 +557,32 @@
BUG_ON(num_registers > US_IOBUF_SIZE/2);
- // Write to multiple registers, ATA access
+ /* Write to multiple registers, ATA access */
command[0] = 0x40;
command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
- // No relevance
+ /* No relevance */
command[2] = 0;
command[3] = 0;
command[4] = 0;
command[5] = 0;
- // Number of bytes to be transferred (incl. addresses and data)
+ /* Number of bytes to be transferred (incl. addresses and data) */
command[6] = LSB_of(num_registers*2);
command[7] = MSB_of(num_registers*2);
- // The setup command
+ /* The setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Create the reg/data, reg/data sequence
+ /* Create the reg/data, reg/data sequence */
for (i=0; i<num_registers; i++) {
data[i<<1] = registers[i];
data[1+(i<<1)] = data_out[i];
}
- // Send the data
+ /* Send the data */
result = usbat_bulk_write(us, data, num_registers*2);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -606,17 +616,17 @@
command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
command[2] = USBAT_ATA_DATA;
command[3] = USBAT_ATA_STATUS;
- command[4] = 0xFD; // Timeout (ms);
+ command[4] = 0xFD; /* Timeout (ms); */
command[5] = USBAT_QUAL_FCQ;
command[6] = LSB_of(len);
command[7] = MSB_of(len);
- // Multiple block read setup command
+ /* Multiple block read setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- // Read the blocks we just asked for
+ /* Read the blocks we just asked for */
result = usbat_bulk_read(us, buffer, len);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
@@ -647,17 +657,17 @@
command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
command[2] = USBAT_ATA_DATA;
command[3] = USBAT_ATA_STATUS;
- command[4] = 0xFD; // Timeout (ms)
+ command[4] = 0xFD; /* Timeout (ms) */
command[5] = USBAT_QUAL_FCQ;
command[6] = LSB_of(len);
command[7] = MSB_of(len);
- // Multiple block write setup command
+ /* Multiple block write setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- // Write the data
+ /* Write the data */
result = usbat_bulk_write(us, buffer, len);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
@@ -711,16 +721,20 @@
{
int rc;
- // Reset peripheral, enable peripheral control signals
- // (bring reset signal up)
+ /*
+ * Reset peripheral, enable peripheral control signals
+ * (bring reset signal up)
+ */
rc = usbat_write_user_io(us,
USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Enable peripheral control signals
- // (bring reset signal down)
+ /*
+ * Enable peripheral control signals
+ * (bring reset signal down)
+ */
rc = usbat_write_user_io(us,
USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -737,7 +751,7 @@
{
int rc;
- // Enable peripheral control signals and card detect
+ /* Enable peripheral control signals and card detect */
rc = usbat_write_user_io(us,
USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -786,7 +800,7 @@
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Check for media existence
+ /* Check for media existence */
rc = usbat_flash_check_media_present(uio);
if (rc == USBAT_FLASH_MEDIA_NONE) {
info->sense_key = 0x02;
@@ -795,11 +809,11 @@
return USB_STOR_TRANSPORT_FAILED;
}
- // Check for media change
+ /* Check for media change */
rc = usbat_flash_check_media_changed(uio);
if (rc == USBAT_FLASH_MEDIA_CHANGED) {
- // Reset and re-enable card detect
+ /* Reset and re-enable card detect */
rc = usbat_device_reset(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
@@ -855,15 +869,15 @@
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Check for error bit
- if (status & 0x01) {
- // Device is a CompactFlash reader/writer
- US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
- info->devicetype = USBAT_DEV_FLASH;
- } else {
- // Device is HP 8200
+ /* Check for error bit, or if the command 'fell through' */
+ if (status == 0xA1 || !(status & 0x01)) {
+ /* Device is HP 8200 */
US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
info->devicetype = USBAT_DEV_HP8200;
+ } else {
+ /* Device is a CompactFlash reader/writer */
+ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
+ info->devicetype = USBAT_DEV_FLASH;
}
return USB_STOR_TRANSPORT_GOOD;
@@ -916,7 +930,7 @@
if (!reply)
return USB_STOR_TRANSPORT_ERROR;
- // ATAPI command : IDENTIFY DEVICE
+ /* ATA command : IDENTIFY DEVICE */
rc = usbat_multiple_write(us, registers, command, 3);
if (rc != USB_STOR_XFER_GOOD) {
US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n");
@@ -924,7 +938,7 @@
goto leave;
}
- // Read device status
+ /* Read device status */
if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
rc = USB_STOR_TRANSPORT_ERROR;
goto leave;
@@ -932,7 +946,7 @@
msleep(100);
- // Read the device identification data
+ /* Read the device identification data */
rc = usbat_read_block(us, reply, 512);
if (rc != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -977,19 +991,23 @@
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
- // we're working in LBA mode. according to the ATA spec,
- // we can support up to 28-bit addressing. I don't know if Jumpshot
- // supports beyond 24-bit addressing. It's kind of hard to test
- // since it requires > 8GB CF card.
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if Jumpshot
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB CF card.
+ */
if (sector > 0x0FFFFFFF)
return USB_STOR_TRANSPORT_ERROR;
totallen = sectors * info->ssize;
- // Since we don't read more than 64 KB at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we don't read more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
alloclen = min(totallen, 65536u);
buffer = kmalloc(alloclen, GFP_NOIO);
@@ -997,27 +1015,29 @@
return USB_STOR_TRANSPORT_ERROR;
do {
- // loop, never allocate or transfer more than 64k at once
- // (min(128k, 255*info->ssize) is the real limit)
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
len = min(totallen, alloclen);
thistime = (len / info->ssize) & 0xff;
- // ATAPI command 0x20 (READ SECTORS)
- usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20);
+ /* ATA command 0x20 (READ SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
- // Write/execute ATAPI read command
+ /* Write/execute ATA read command */
result = usbat_multiple_write(us, registers, command, 7);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
- // Read the data we just requested
+ /* Read the data we just requested */
result = usbat_read_blocks(us, buffer, len);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
US_DEBUGP("usbat_flash_read_data: %d bytes\n", len);
- // Store the data in the transfer buffer
+ /* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg_idx, &sg_offset, TO_XFER_BUF);
@@ -1061,19 +1081,23 @@
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
- // we're working in LBA mode. according to the ATA spec,
- // we can support up to 28-bit addressing. I don't know if Jumpshot
- // supports beyond 24-bit addressing. It's kind of hard to test
- // since it requires > 8GB CF card.
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if the device
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB media.
+ */
if (sector > 0x0FFFFFFF)
return USB_STOR_TRANSPORT_ERROR;
totallen = sectors * info->ssize;
- // Since we don't write more than 64 KB at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we don't write more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
alloclen = min(totallen, 65536u);
buffer = kmalloc(alloclen, GFP_NOIO);
@@ -1081,24 +1105,26 @@
return USB_STOR_TRANSPORT_ERROR;
do {
- // loop, never allocate or transfer more than 64k at once
- // (min(128k, 255*info->ssize) is the real limit)
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
len = min(totallen, alloclen);
thistime = (len / info->ssize) & 0xff;
- // Get the data from the transfer buffer
+ /* Get the data from the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg_idx, &sg_offset, FROM_XFER_BUF);
- // ATAPI command 0x30 (WRITE SECTORS)
- usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30);
+ /* ATA command 0x30 (WRITE SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
- // Write/execute ATAPI write command
+ /* Write/execute ATA write command */
result = usbat_multiple_write(us, registers, command, 7);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
- // Write the data
+ /* Write the data */
result = usbat_write_blocks(us, buffer, len);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -1169,42 +1195,44 @@
srb->transfersize);
}
- // Since we only read in one block at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we only read in one block at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
len = (65535/srb->transfersize) * srb->transfersize;
US_DEBUGP("Max read is %d bytes\n", len);
len = min(len, srb->request_bufflen);
buffer = kmalloc(len, GFP_NOIO);
- if (buffer == NULL) // bloody hell!
+ if (buffer == NULL) /* bloody hell! */
return USB_STOR_TRANSPORT_FAILED;
sector = short_pack(data[7+3], data[7+2]);
sector <<= 16;
sector |= short_pack(data[7+5], data[7+4]);
transferred = 0;
- sg_segment = 0; // for keeping track of where we are in
- sg_offset = 0; // the scatter/gather list
+ sg_segment = 0; /* for keeping track of where we are in */
+ sg_offset = 0; /* the scatter/gather list */
while (transferred != srb->request_bufflen) {
if (len > srb->request_bufflen - transferred)
len = srb->request_bufflen - transferred;
- data[3] = len&0xFF; // (cylL) = expected length (L)
- data[4] = (len>>8)&0xFF; // (cylH) = expected length (H)
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
- // Fix up the SCSI command sector and num sectors
+ /* Fix up the SCSI command sector and num sectors */
- data[7+2] = MSB_of(sector>>16); // SCSI command sector
+ data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
data[7+3] = LSB_of(sector>>16);
data[7+4] = MSB_of(sector&0xFFFF);
data[7+5] = LSB_of(sector&0xFFFF);
if (data[7+0] == GPCMD_READ_CD)
data[7+6] = 0;
- data[7+7] = MSB_of(len / srb->transfersize); // SCSI command
- data[7+8] = LSB_of(len / srb->transfersize); // num sectors
+ data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
+ data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
registers, data, 19,
@@ -1217,16 +1245,16 @@
if (result != USB_STOR_TRANSPORT_GOOD)
break;
- // Store the data in the transfer buffer
+ /* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, srb,
&sg_segment, &sg_offset, TO_XFER_BUF);
- // Update the amount transferred and the sector number
+ /* Update the amount transferred and the sector number */
transferred += len;
sector += len / srb->transfersize;
- } // while transferred != srb->request_bufflen
+ } /* while transferred != srb->request_bufflen */
kfree(buffer);
return result;
@@ -1237,7 +1265,7 @@
int selector;
unsigned char *status = us->iobuf;
- // try device = master, then device = slave.
+ /* try device = master, then device = slave. */
for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
USB_STOR_XFER_GOOD)
@@ -1298,7 +1326,7 @@
memset(us->extra, 0, sizeof(struct usbat_info));
info = (struct usbat_info *) (us->extra);
- // Enable peripheral control signals
+ /* Enable peripheral control signals */
rc = usbat_write_user_io(us,
USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -1337,7 +1365,7 @@
US_DEBUGP("INIT 5\n");
- // Enable peripheral control signals and card detect
+ /* Enable peripheral control signals and card detect */
rc = usbat_device_enable_cdt(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
@@ -1364,7 +1392,7 @@
US_DEBUGP("INIT 9\n");
- // At this point, we need to detect which device we are using
+ /* At this point, we need to detect which device we are using */
if (usbat_set_transport(us, info))
return USB_STOR_TRANSPORT_ERROR;
@@ -1414,10 +1442,10 @@
data[0] = 0x00;
data[1] = 0x00;
data[2] = 0x00;
- data[3] = len&0xFF; // (cylL) = expected length (L)
- data[4] = (len>>8)&0xFF; // (cylH) = expected length (H)
- data[5] = 0xB0; // (device sel) = slave
- data[6] = 0xA0; // (command) = ATA PACKET COMMAND
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
+ data[5] = 0xB0; /* (device sel) = slave */
+ data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */
for (i=7; i<19; i++) {
registers[i] = 0x10;
@@ -1466,13 +1494,15 @@
return result;
}
- // Write the 12-byte command header.
-
- // If the command is BLANK then set the timer for 75 minutes.
- // Otherwise set it for 10 minutes.
-
- // NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
- // AT SPEED 4 IS UNRELIABLE!!!
+ /*
+ * Write the 12-byte command header.
+ *
+ * If the command is BLANK then set the timer for 75 minutes.
+ * Otherwise set it for 10 minutes.
+ *
+ * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
+ * AT SPEED 4 IS UNRELIABLE!!!
+ */
if ( (result = usbat_write_block(us,
USBAT_ATA, srb->cmnd, 12,
@@ -1481,19 +1511,18 @@
return result;
}
- // If there is response data to be read in
- // then do it here.
+ /* If there is response data to be read in then do it here. */
if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
- // How many bytes to read in? Check cylL register
+ /* How many bytes to read in? Check cylL register */
if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
USB_STOR_XFER_GOOD) {
return USB_STOR_TRANSPORT_ERROR;
}
- if (len > 0xFF) { // need to read cylH also
+ if (len > 0xFF) { /* need to read cylH also */
len = *status;
if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
USB_STOR_XFER_GOOD) {
@@ -1556,13 +1585,16 @@
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec
+ /* hard coded 512 byte sectors as per ATA spec */
+ info->ssize = 0x200;
US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
info->sectors, info->ssize);
- // build the reply
- // note: must return the sector number of the last sector,
- // *not* the total number of sectors
+ /*
+ * build the reply
+ * note: must return the sector number of the last sector,
+ * *not* the total number of sectors
+ */
((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
usb_stor_set_xfer_buf(ptr, 8, srb);
@@ -1586,7 +1618,9 @@
}
if (srb->cmnd[0] == READ_12) {
- // I don't think we'll ever see a READ_12 but support it anyway...
+ /*
+ * I don't think we'll ever see a READ_12 but support it anyway
+ */
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
@@ -1608,7 +1642,9 @@
}
if (srb->cmnd[0] == WRITE_12) {
- // I don't think we'll ever see a WRITE_12 but support it anyway...
+ /*
+ * I don't think we'll ever see a WRITE_12 but support it anyway
+ */
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
@@ -1645,8 +1681,10 @@
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
- // sure. whatever. not like we can stop the user from popping
- // the media out of the device (no locking doors, etc)
+ /*
+ * sure. whatever. not like we can stop the user from popping
+ * the media out of the device (no locking doors, etc)
+ */
return USB_STOR_TRANSPORT_GOOD;
}
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
index 5b8e867..25e7d8b 100644
--- a/drivers/usb/storage/shuttle_usbat.h
+++ b/drivers/usb/storage/shuttle_usbat.h
@@ -55,8 +55,8 @@
#define USBAT_UIO_WRITE 0
/* Qualifier bits */
-#define USBAT_QUAL_FCQ 0x20 // full compare
-#define USBAT_QUAL_ALQ 0x10 // auto load subcount
+#define USBAT_QUAL_FCQ 0x20 /* full compare */
+#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
/* USBAT Flash Media status types */
#define USBAT_FLASH_MEDIA_NONE 0
@@ -67,39 +67,39 @@
#define USBAT_FLASH_MEDIA_CHANGED 1
/* USBAT ATA registers */
-#define USBAT_ATA_DATA 0x10 // read/write data (R/W)
-#define USBAT_ATA_FEATURES 0x11 // set features (W)
-#define USBAT_ATA_ERROR 0x11 // error (R)
-#define USBAT_ATA_SECCNT 0x12 // sector count (R/W)
-#define USBAT_ATA_SECNUM 0x13 // sector number (R/W)
-#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W)
-#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W)
-#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W)
-#define USBAT_ATA_STATUS 0x17 // device status (R)
-#define USBAT_ATA_CMD 0x17 // device command (W)
-#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R)
+#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES 0x11 /* set features (W) */
+#define USBAT_ATA_ERROR 0x11 /* error (R) */
+#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
+#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS 0x17 /* device status (R) */
+#define USBAT_ATA_CMD 0x17 /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
/* USBAT User I/O Data registers */
-#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals
-#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only)
- // CDT = ACKD & !UI1 & !UI0
-#define USBAT_UIO_1 0x20 // I/O 1
-#define USBAT_UIO_0 0x10 // I/O 0
-#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode
-#define USBAT_UIO_UI1 0x04 // Input 1
-#define USBAT_UIO_UI0 0x02 // Input 0
-#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP)
+#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
+ /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1 0x20 /* I/O 1 */
+#define USBAT_UIO_0 0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1 0x04 /* Input 1 */
+#define USBAT_UIO_UI0 0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
/* USBAT User I/O Enable registers */
-#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral
-#define USBAT_UIO_ACKD 0x40 // Enable Card Detect
-#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input
- // If ACKD=1, set OE1 to 1 also.
-#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input
-#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip
+#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
+ /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
/* USBAT Features */
-#define USBAT_FEAT_ETEN 0x80 // External trigger enable
+#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
#define USBAT_FEAT_U1 0x08
#define USBAT_FEAT_U0 0x04
#define USBAT_FEAT_ET1 0x02
@@ -112,12 +112,12 @@
int devicetype;
/* Used for Flash readers only */
- unsigned long sectors; // total sector count
- unsigned long ssize; // sector size in bytes
+ unsigned long sectors; /* total sector count */
+ unsigned long ssize; /* sector size in bytes */
unsigned char sense_key;
- unsigned long sense_asc; // additional sense code
- unsigned long sense_ascq; // additional sense code qualifier
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
};
#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index c1ba530..7ca896a 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -636,11 +636,11 @@
/* use the new buffer we have */
old_request_buffer = srb->request_buffer;
- srb->request_buffer = srb->sense_buffer;
+ srb->request_buffer = us->sensebuf;
/* set the buffer length for transfer */
old_request_bufflen = srb->request_bufflen;
- srb->request_bufflen = 18;
+ srb->request_bufflen = US_SENSE_SIZE;
/* set up for no scatter-gather use */
old_sg = srb->use_sg;
@@ -652,6 +652,7 @@
temp_result = us->transport(us->srb, us);
/* let's clean up right away */
+ memcpy(srb->sense_buffer, us->sensebuf, US_SENSE_SIZE);
srb->resid = old_resid;
srb->request_buffer = old_request_buffer;
srb->request_bufflen = old_request_bufflen;
@@ -923,6 +924,7 @@
int result;
/* issue the command */
+ us->iobuf[0] = 0;
result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
US_BULK_GET_MAX_LUN,
USB_DIR_IN | USB_TYPE_CLASS |
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 8d9e066..0a362cc 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -50,7 +50,7 @@
#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
#define US_PR_BULK 0x50 /* bulk only */
#ifdef CONFIG_USB_STORAGE_USBAT
-#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */
+#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR09
#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index b79dad1..9e926a8 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -71,12 +71,12 @@
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP",
"CD-Writer+ 8200e",
- US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat, 0),
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP",
"CD-Writer+ CD-4e",
- US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat, 0),
#endif
/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
@@ -106,6 +106,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Reported by Stefan Werner <dustbln@gmx.de> */
+UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
+ "TrekStor",
+ "i.Beat Joy 2.0",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
"SMSC",
@@ -244,6 +251,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
+UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
+ "LEICA",
+ "D-LUX Camera",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
/* Most of the following entries were developed with the help of
* Shuttle/SCM directly.
*/
@@ -333,9 +347,9 @@
#ifdef CONFIG_USB_STORAGE_USBAT
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
- "SCM",
- "SCM USBAT-02",
- US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat,
+ "Shuttle/SCM",
+ "USBAT-02",
+ US_SC_SCSI, US_PR_USBAT, init_usbat,
US_FL_SINGLE_LUN),
#endif
@@ -598,6 +612,16 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/*
+ * Reported by Tyson Vinson <lornoss@gmail.com>
+ * This particular productId is the iPod Nano
+ */
+UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
+ "Apple",
+ "iPod",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
"Lexar",
@@ -702,6 +726,14 @@
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
+#ifdef CONFIG_USB_STORAGE_USBAT
+UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
+ "Sandisk",
+ "ImageMate SDDR-05b",
+ US_SC_SCSI, US_PR_USBAT, init_usbat,
+ US_FL_SINGLE_LUN ),
+#endif
+
UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
"Sandisk",
"ImageMate SDDR-12",
@@ -724,7 +756,7 @@
#endif
/* Reported by Eero Volotinen <eero@ping-viini.org> */
-UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406,
+UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
"Freecom Technologies",
"FHD-Classic",
US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index f9a9bfa..3847ebe 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -54,6 +54,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/kthread.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -111,11 +112,6 @@
static DECLARE_COMPLETION(threads_gone);
-static int storage_probe(struct usb_interface *iface,
- const struct usb_device_id *id);
-
-static void storage_disconnect(struct usb_interface *iface);
-
/* The entries in this table, except for final ones here
* (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
* line for line with the entries of us_unsuaul_dev_list[].
@@ -233,13 +229,40 @@
{ NULL }
};
-static struct usb_driver usb_storage_driver = {
- .owner = THIS_MODULE,
- .name = "usb-storage",
- .probe = storage_probe,
- .disconnect = storage_disconnect,
- .id_table = storage_usb_ids,
-};
+
+#ifdef CONFIG_PM /* Minimal support for suspend and resume */
+
+static int storage_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ /* Wait until no command is running */
+ down(&us->dev_semaphore);
+
+ US_DEBUGP("%s\n", __FUNCTION__);
+ iface->dev.power.power_state.event = message.event;
+
+ /* When runtime PM is working, we'll set a flag to indicate
+ * whether we should autoresume when a SCSI request arrives. */
+
+ up(&us->dev_semaphore);
+ return 0;
+}
+
+static int storage_resume(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ down(&us->dev_semaphore);
+
+ US_DEBUGP("%s\n", __FUNCTION__);
+ iface->dev.power.power_state.event = PM_EVENT_ON;
+
+ up(&us->dev_semaphore);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
/*
* fill_inquiry_response takes an unsigned char array (which must
@@ -288,22 +311,7 @@
struct us_data *us = (struct us_data *)__us;
struct Scsi_Host *host = us_to_host(us);
- lock_kernel();
-
- /*
- * This thread doesn't need any user-level access,
- * so get rid of all our resources.
- */
- daemonize("usb-storage");
current->flags |= PF_NOFREEZE;
- unlock_kernel();
-
- /* acquire a reference to the host, so it won't be deallocated
- * until we're ready to exit */
- scsi_host_get(host);
-
- /* signal that we've started the thread */
- complete(&(us->notify));
for(;;) {
US_DEBUGP("*** thread sleeping.\n");
@@ -467,6 +475,12 @@
US_DEBUGP("I/O buffer allocation failed\n");
return -ENOMEM;
}
+
+ us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
+ if (!us->sensebuf) {
+ US_DEBUGP("Sense buffer allocation failed\n");
+ return -ENOMEM;
+ }
return 0;
}
@@ -555,8 +569,8 @@
break;
#ifdef CONFIG_USB_STORAGE_USBAT
- case US_PR_SCM_ATAPI:
- us->transport_name = "SCM/ATAPI";
+ case US_PR_USBAT:
+ us->transport_name = "Shuttle USBAT";
us->transport = usbat_transport;
us->transport_reset = usb_stor_CB_reset;
us->max_lun = 1;
@@ -740,6 +754,7 @@
static int usb_stor_acquire_resources(struct us_data *us)
{
int p;
+ struct task_struct *th;
us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!us->current_urb) {
@@ -747,38 +762,28 @@
return -ENOMEM;
}
- /* Lock the device while we carry out the next two operations */
- down(&us->dev_semaphore);
-
- /* For bulk-only devices, determine the max LUN value */
- if (us->protocol == US_PR_BULK) {
- p = usb_stor_Bulk_max_lun(us);
- if (p < 0) {
- up(&us->dev_semaphore);
- return p;
- }
- us->max_lun = p;
- }
-
/* Just before we start our control thread, initialize
* the device if it needs initialization */
- if (us->unusual_dev->initFunction)
- us->unusual_dev->initFunction(us);
-
- up(&us->dev_semaphore);
+ if (us->unusual_dev->initFunction) {
+ p = us->unusual_dev->initFunction(us);
+ if (p)
+ return p;
+ }
/* Start up our control thread */
- p = kernel_thread(usb_stor_control_thread, us, CLONE_VM);
- if (p < 0) {
+ th = kthread_create(usb_stor_control_thread, us, "usb-storage");
+ if (IS_ERR(th)) {
printk(KERN_WARNING USB_STORAGE
"Unable to start control thread\n");
- return p;
+ return PTR_ERR(th);
}
- us->pid = p;
- atomic_inc(&total_threads);
- /* Wait for the thread to start */
- wait_for_completion(&(us->notify));
+ /* Take a reference to the host for the control thread and
+ * count it among all the threads we have launched. Then
+ * start it up. */
+ scsi_host_get(us_to_host(us));
+ atomic_inc(&total_threads);
+ wake_up_process(th);
return 0;
}
@@ -812,6 +817,8 @@
{
US_DEBUGP("-- %s\n", __FUNCTION__);
+ kfree(us->sensebuf);
+
/* Free the device-related DMA-mapped buffers */
if (us->cr)
usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr,
@@ -872,21 +879,6 @@
{
struct us_data *us = (struct us_data *)__us;
- /*
- * This thread doesn't need any user-level access,
- * so get rid of all our resources.
- */
- lock_kernel();
- daemonize("usb-stor-scan");
- unlock_kernel();
-
- /* Acquire a reference to the host, so it won't be deallocated
- * until we're ready to exit */
- scsi_host_get(us_to_host(us));
-
- /* Signal that we've started the thread */
- complete(&(us->notify));
-
printk(KERN_DEBUG
"usb-storage: device found at %d\n", us->pusb_dev->devnum);
@@ -904,6 +896,14 @@
/* If the device is still connected, perform the scanning */
if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
+
+ /* For bulk-only devices, determine the max LUN value */
+ if (us->protocol == US_PR_BULK &&
+ !(us->flags & US_FL_SINGLE_LUN)) {
+ down(&us->dev_semaphore);
+ us->max_lun = usb_stor_Bulk_max_lun(us);
+ up(&us->dev_semaphore);
+ }
scsi_scan_host(us_to_host(us));
printk(KERN_DEBUG "usb-storage: device scan complete\n");
@@ -923,6 +923,7 @@
struct us_data *us;
const int id_index = id - storage_usb_ids;
int result;
+ struct task_struct *th;
US_DEBUGP("USB Mass Storage device detected\n");
@@ -1003,17 +1004,21 @@
}
/* Start up the thread for delayed SCSI-device scanning */
- result = kernel_thread(usb_stor_scan_thread, us, CLONE_VM);
- if (result < 0) {
+ th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
+ if (IS_ERR(th)) {
printk(KERN_WARNING USB_STORAGE
"Unable to start the device-scanning thread\n");
quiesce_and_remove_host(us);
+ result = PTR_ERR(th);
goto BadDevice;
}
- atomic_inc(&total_threads);
- /* Wait for the thread to start */
- wait_for_completion(&(us->notify));
+ /* Take a reference to the host for the scanning thread and
+ * count it among all the threads we have launched. Then
+ * start it up. */
+ scsi_host_get(us_to_host(us));
+ atomic_inc(&total_threads);
+ wake_up_process(th);
return 0;
@@ -1038,6 +1043,18 @@
* Initialization and registration
***********************************************************************/
+static struct usb_driver usb_storage_driver = {
+ .owner = THIS_MODULE,
+ .name = "usb-storage",
+ .probe = storage_probe,
+ .disconnect = storage_disconnect,
+#ifdef CONFIG_PM
+ .suspend = storage_suspend,
+ .resume = storage_resume,
+#endif
+ .id_table = storage_usb_ids,
+};
+
static int __init usb_stor_init(void)
{
int retval;
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index a195ada..98b0971 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -117,6 +117,7 @@
*/
#define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */
+#define US_SENSE_SIZE 18 /* Size of the autosense data buffer */
typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
typedef int (*trans_reset)(struct us_data*);
@@ -160,14 +161,12 @@
struct scsi_cmnd *srb; /* current srb */
unsigned int tag; /* current dCBWTag */
- /* thread information */
- int pid; /* control thread */
-
/* control and bulk communications data */
struct urb *current_urb; /* USB requests */
struct usb_ctrlrequest *cr; /* control requests */
struct usb_sg_request current_sg; /* scatter-gather req. */
unsigned char *iobuf; /* I/O buffer */
+ unsigned char *sensebuf; /* sense data buffer */
dma_addr_t cr_dma; /* buffer DMA addresses */
dma_addr_t iobuf_dma;
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 353f24d..6c3a53f 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -223,9 +223,8 @@
* and to have the device registered with devfs and the driver core
*/
static struct usb_class_driver skel_class = {
- .name = "usb/skel%d",
+ .name = "skel%d",
.fops = &skel_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
.minor_base = USB_SKEL_MINOR_BASE,
};
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1cd942a..7192b77 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -494,7 +494,7 @@
config FB_VESA
bool "VESA VGA graphics support"
- depends on (FB = y) && (X86 || X86_64)
+ depends on (FB = y) && X86
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -712,7 +712,7 @@
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ depends on FB && EXPERIMENTAL && PCI && X86_32
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
@@ -761,7 +761,7 @@
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ depends on FB && EXPERIMENTAL && PCI && X86_32
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
@@ -1376,7 +1376,7 @@
config FB_PMAG_AA
bool "PMAG-AA TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1387,7 +1387,7 @@
config FB_PMAG_BA
bool "PMAG-BA TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1398,7 +1398,7 @@
config FB_PMAGB_B
bool "PMAGB-B TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1410,7 +1410,7 @@
config FB_MAXINE
bool "Maxine (Personal DECstation) onboard framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && MACH_DECSTATION
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 1fff29f..97c5d03 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -86,7 +86,7 @@
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
obj-$(CONFIG_FB_W100) += w100fb.o
-obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o
+obj-$(CONFIG_FB_AU1100) += au1100fb.o
obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 321dbe9..cde6fd8 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -22,6 +22,7 @@
#include <linux/ioport.h>
#include <linux/list.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index b6fe30c..a512980 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -2,6 +2,11 @@
* BRIEF MODULE DESCRIPTION
* Au1100 LCD Driver.
*
+ * Rewritten for 2.6 by Embedded Alley Solutions
+ * <source@embeddedalley.com>, based on submissions by
+ * Karl Lessard <klessard@sunrisetelecom.com>
+ * <c.pellegrin@exadron.com>
+ *
* Copyright 2002 MontaVista Software
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
@@ -33,298 +38,253 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
-#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
-#include <asm/au1000.h>
-#include <asm/pb1100.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define DEBUG 0
+
#include "au1100fb.h"
-#include <video/fbcon.h>
-#include <video/fbcon-mfb.h>
-#include <video/fbcon-cfb2.h>
-#include <video/fbcon-cfb4.h>
-#include <video/fbcon-cfb8.h>
-#include <video/fbcon-cfb16.h>
-
/*
* Sanity check. If this is a new Au1100 based board, search for
* the PB1100 ifdefs to make sure you modify the code accordingly.
*/
-#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_HYDROGEN3)
+#if defined(CONFIG_MIPS_PB1100)
+ #include <asm/mach-pb1x00/pb1100.h>
+#elif defined(CONFIG_MIPS_DB1100)
+ #include <asm/mach-db1x00/db1x00.h>
#else
-error Unknown Au1100 board
+ #error "Unknown Au1100 board, Au1100 FB driver not supported"
#endif
-#define CMAPSIZE 16
+#define DRIVER_NAME "au1100fb"
+#define DRIVER_DESC "LCD controller driver for AU1100 processors"
-static int my_lcd_index; /* default is zero */
-struct known_lcd_panels *p_lcd;
-AU1100_LCD *p_lcd_reg = (AU1100_LCD *)AU1100_LCD_ADDR;
+#define to_au1100fb_device(_info) \
+ (_info ? container_of(_info, struct au1100fb_device, info) : NULL);
-struct au1100fb_info {
- struct fb_info_gen gen;
- unsigned long fb_virt_start;
- unsigned long fb_size;
- unsigned long fb_phys;
- int mmaped;
- int nohwcursor;
-
- struct { unsigned red, green, blue, pad; } palette[256];
-
-#if defined(FBCON_HAS_CFB16)
- u16 fbcon_cmap16[16];
-#endif
-};
-
-
-struct au1100fb_par {
- struct fb_var_screeninfo var;
-
- int line_length; // in bytes
- int cmap_len; // color-map length
-};
-
-
-static struct au1100fb_info fb_info;
-static struct au1100fb_par current_par;
-static struct display disp;
-
-int au1100fb_init(void);
-void au1100fb_setup(char *options, int *ints);
-static int au1100fb_mmap(struct fb_info *fb, struct file *file,
- struct vm_area_struct *vma);
-static int au1100_blank(int blank_mode, struct fb_info_gen *info);
-static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
- u_long arg, int con, struct fb_info *info);
-
-void au1100_nocursor(struct display *p, int mode, int xx, int yy){};
-
-static struct fb_ops au1100fb_ops = {
- .owner = THIS_MODULE,
- .fb_get_fix = fbgen_get_fix,
- .fb_get_var = fbgen_get_var,
- .fb_set_var = fbgen_set_var,
- .fb_get_cmap = fbgen_get_cmap,
- .fb_set_cmap = fbgen_set_cmap,
- .fb_pan_display = fbgen_pan_display,
- .fb_ioctl = au1100fb_ioctl,
- .fb_mmap = au1100fb_mmap,
-};
-
-static void au1100_detect(void)
+/* Bitfields format supported by the controller. Note that the order of formats
+ * SHOULD be the same as in the LCD_CONTROL_SBPPF field, so we can retrieve the
+ * right pixel format by doing rgb_bitfields[LCD_CONTROL_SBPPF_XXX >> LCD_CONTROL_SBPPF]
+ */
+struct fb_bitfield rgb_bitfields[][4] =
{
- /*
- * This function should detect the current video mode settings
- * and store it as the default video mode
+ /* Red, Green, Blue, Transp */
+ { { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+ { { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
+ { { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
+ { { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
+
+ /* The last is used to describe 12bpp format */
+ { { 8, 4, 0 }, { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } },
+};
+
+static struct fb_fix_screeninfo au1100fb_fix __initdata = {
+ .id = "AU1100 FB",
+ .xpanstep = 1,
+ .ypanstep = 1,
+ .type = FB_TYPE_PACKED_PIXELS,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo au1100fb_var __initdata = {
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static struct au1100fb_drv_info drv_info;
+
+/*
+ * Set hardware with var settings. This will enable the controller with a specific
+ * mode, normally validated with the fb_check_var method
*/
-
- /*
- * Yeh, well, we're not going to change any settings so we're
- * always stuck with the default ...
- */
-
-}
-
-static int au1100_encode_fix(struct fb_fix_screeninfo *fix,
- const void *_par, struct fb_info_gen *_info)
+int au1100fb_setmode(struct au1100fb_device *fbdev)
{
- struct au1100fb_info *info = (struct au1100fb_info *) _info;
- struct au1100fb_par *par = (struct au1100fb_par *) _par;
- struct fb_var_screeninfo *var = &par->var;
+ struct fb_info *info = &fbdev->info;
+ u32 words;
+ int index;
- memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+ if (!fbdev)
+ return -EINVAL;
- fix->smem_start = info->fb_phys;
- fix->smem_len = info->fb_size;
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->type_aux = 0;
- fix->visual = (var->bits_per_pixel == 8) ?
- FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
- fix->ywrapstep = 0;
- fix->xpanstep = 1;
- fix->ypanstep = 1;
- fix->line_length = current_par.line_length;
+ /* Update var-dependent FB info */
+ if (panel_is_active(fbdev->panel) || panel_is_color(fbdev->panel)) {
+ if (info->var.bits_per_pixel <= 8) {
+ /* palettized */
+ info->var.red.offset = 0;
+ info->var.red.length = info->var.bits_per_pixel;
+ info->var.red.msb_right = 0;
+
+ info->var.green.offset = 0;
+ info->var.green.length = info->var.bits_per_pixel;
+ info->var.green.msb_right = 0;
+
+ info->var.blue.offset = 0;
+ info->var.blue.length = info->var.bits_per_pixel;
+ info->var.blue.msb_right = 0;
+
+ info->var.transp.offset = 0;
+ info->var.transp.length = 0;
+ info->var.transp.msb_right = 0;
+
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ info->fix.line_length = info->var.xres_virtual /
+ (8/info->var.bits_per_pixel);
+ } else {
+ /* non-palettized */
+ index = (fbdev->panel->control_base & LCD_CONTROL_SBPPF_MASK) >> LCD_CONTROL_SBPPF_BIT;
+ info->var.red = rgb_bitfields[index][0];
+ info->var.green = rgb_bitfields[index][1];
+ info->var.blue = rgb_bitfields[index][2];
+ info->var.transp = rgb_bitfields[index][3];
+
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.line_length = info->var.xres_virtual << 1; /* depth=16 */
+ }
+ } else {
+ /* mono */
+ info->fix.visual = FB_VISUAL_MONO10;
+ info->fix.line_length = info->var.xres_virtual / 8;
+ }
+
+ info->screen_size = info->fix.line_length * info->var.yres_virtual;
+
+ /* Determine BPP mode and format */
+ fbdev->regs->lcd_control = fbdev->panel->control_base |
+ ((info->var.rotate/90) << LCD_CONTROL_SM_BIT);
+
+ fbdev->regs->lcd_intenable = 0;
+ fbdev->regs->lcd_intstatus = 0;
+
+ fbdev->regs->lcd_horztiming = fbdev->panel->horztiming;
+
+ fbdev->regs->lcd_verttiming = fbdev->panel->verttiming;
+
+ fbdev->regs->lcd_clkcontrol = fbdev->panel->clkcontrol_base;
+
+ fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(fbdev->fb_phys);
+
+ if (panel_is_dual(fbdev->panel)) {
+ /* Second panel display seconf half of screen if possible,
+ * otherwise display the same as the first panel */
+ if (info->var.yres_virtual >= (info->var.yres << 1)) {
+ fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys +
+ (info->fix.line_length *
+ (info->var.yres_virtual >> 1)));
+ } else {
+ fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys);
+ }
+ }
+
+ words = info->fix.line_length / sizeof(u32);
+ if (!info->var.rotate || (info->var.rotate == 180)) {
+ words *= info->var.yres_virtual;
+ if (info->var.rotate /* 180 */) {
+ words -= (words % 8); /* should be divisable by 8 */
+ }
+ }
+ fbdev->regs->lcd_words = LCD_WRD_WRDS_N(words);
+
+ fbdev->regs->lcd_pwmdiv = 0;
+ fbdev->regs->lcd_pwmhi = 0;
+
+ /* Resume controller */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+
return 0;
}
-static void set_color_bitfields(struct fb_var_screeninfo *var)
+/* fb_setcolreg
+ * Set color in LCD palette.
+ */
+int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
{
- switch (var->bits_per_pixel) {
- case 8:
- var->red.offset = 0;
- var->red.length = 8;
- var->green.offset = 0;
- var->green.length = 8;
- var->blue.offset = 0;
- var->blue.length = 8;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
- case 16: /* RGB 565 */
- var->red.offset = 11;
- var->red.length = 5;
- var->green.offset = 5;
- var->green.length = 6;
- var->blue.offset = 0;
- var->blue.length = 5;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
- }
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ u32 *palette = fbdev->regs->lcd_pallettebase;
+ u32 value;
- var->red.msb_right = 0;
- var->green.msb_right = 0;
- var->blue.msb_right = 0;
- var->transp.msb_right = 0;
-}
-
-static int au1100_decode_var(const struct fb_var_screeninfo *var,
- void *_par, struct fb_info_gen *_info)
-{
-
- struct au1100fb_par *par = (struct au1100fb_par *)_par;
-
- /*
- * Don't allow setting any of these yet: xres and yres don't
- * make sense for LCD panels.
- */
- if (var->xres != p_lcd->xres ||
- var->yres != p_lcd->yres ||
- var->xres != p_lcd->xres ||
- var->yres != p_lcd->yres) {
+ if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
return -EINVAL;
- }
- if(var->bits_per_pixel != p_lcd->bpp) {
- return -EINVAL;
+
+ if (fbi->var.grayscale) {
+ /* Convert color to grayscale */
+ red = green = blue =
+ (19595 * red + 38470 * green + 7471 * blue) >> 16;
}
- memset(par, 0, sizeof(struct au1100fb_par));
- par->var = *var;
-
- /* FIXME */
- switch (var->bits_per_pixel) {
- case 8:
- par->var.bits_per_pixel = 8;
- break;
- case 16:
- par->var.bits_per_pixel = 16;
- break;
- default:
- printk("color depth %d bpp not supported\n",
- var->bits_per_pixel);
+ if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
+ /* Place color in the pseudopalette */
+ if (regno > 16)
return -EINVAL;
- }
- set_color_bitfields(&par->var);
- par->cmap_len = (par->var.bits_per_pixel == 8) ? 256 : 16;
- return 0;
-}
+ palette = (u32*)fbi->pseudo_palette;
-static int au1100_encode_var(struct fb_var_screeninfo *var,
- const void *par, struct fb_info_gen *_info)
-{
+ red >>= (16 - fbi->var.red.length);
+ green >>= (16 - fbi->var.green.length);
+ blue >>= (16 - fbi->var.blue.length);
- *var = ((struct au1100fb_par *)par)->var;
- return 0;
-}
+ value = (red << fbi->var.red.offset) |
+ (green << fbi->var.green.offset)|
+ (blue << fbi->var.blue.offset);
+ value &= 0xFFFF;
-static void
-au1100_get_par(void *_par, struct fb_info_gen *_info)
-{
- *(struct au1100fb_par *)_par = current_par;
-}
+ } else if (panel_is_active(fbdev->panel)) {
+ /* COLOR TFT PALLETTIZED (use RGB 565) */
+ value = (red & 0xF800)|((green >> 5) & 0x07E0)|((blue >> 11) & 0x001F);
+ value &= 0xFFFF;
-static void au1100_set_par(const void *par, struct fb_info_gen *info)
-{
- /* nothing to do: we don't change any settings */
-}
-
-static int au1100_getcolreg(unsigned regno, unsigned *red, unsigned *green,
- unsigned *blue, unsigned *transp,
- struct fb_info *info)
-{
-
- struct au1100fb_info* i = (struct au1100fb_info*)info;
-
- if (regno > 255)
- return 1;
-
- *red = i->palette[regno].red;
- *green = i->palette[regno].green;
- *blue = i->palette[regno].blue;
- *transp = 0;
-
- return 0;
-}
-
-static int au1100_setcolreg(unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp,
- struct fb_info *info)
-{
- struct au1100fb_info* i = (struct au1100fb_info *)info;
- u32 rgbcol;
-
- if (regno > 255)
- return 1;
-
- i->palette[regno].red = red;
- i->palette[regno].green = green;
- i->palette[regno].blue = blue;
-
- switch(p_lcd->bpp) {
-#ifdef FBCON_HAS_CFB8
- case 8:
- red >>= 10;
- green >>= 10;
- blue >>= 10;
- p_lcd_reg->lcd_pallettebase[regno] = (blue&0x1f) |
- ((green&0x3f)<<5) | ((red&0x1f)<<11);
- break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 16:
- i->fbcon_cmap16[regno] =
- ((red & 0xf800) >> 0) |
- ((green & 0xfc00) >> 5) |
- ((blue & 0xf800) >> 11);
- break;
-#endif
- default:
- break;
+ } else if (panel_is_color(fbdev->panel)) {
+ /* COLOR STN MODE */
+ value = (((panel_swap_rgb(fbdev->panel) ? blue : red) >> 12) & 0x000F) |
+ ((green >> 8) & 0x00F0) |
+ (((panel_swap_rgb(fbdev->panel) ? red : blue) >> 4) & 0x0F00);
+ value &= 0xFFF;
+ } else {
+ /* MONOCHROME MODE */
+ value = (green >> 12) & 0x000F;
+ value &= 0xF;
}
+ palette[regno] = value;
+
return 0;
}
-
-static int au1100_blank(int blank_mode, struct fb_info_gen *_info)
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_blank %d %p", blank_mode, fbi);
switch (blank_mode) {
+
case VESA_NO_BLANKING:
- /* turn on panel */
- //printk("turn on panel\n");
+ /* Turn on panel */
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
#ifdef CONFIG_MIPS_PB1100
- p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
- au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight,
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
PB1100_G_CONTROL);
-#endif
-#ifdef CONFIG_MIPS_HYDROGEN3
- /* Turn controller & power supply on, GPIO213 */
- au_writel(0x20002000, 0xB1700008);
- au_writel(0x00040000, 0xB1900108);
- au_writel(0x01000100, 0xB1700008);
+ }
#endif
au_sync();
break;
@@ -332,12 +292,14 @@
case VESA_VSYNC_SUSPEND:
case VESA_HSYNC_SUSPEND:
case VESA_POWERDOWN:
- /* turn off panel */
- //printk("turn off panel\n");
+ /* Turn off panel */
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
#ifdef CONFIG_MIPS_PB1100
- au_writew(au_readw(PB1100_G_CONTROL) & ~p_lcd->mode_backlight,
+ if (drv_info.panel_idx == 1) {
+ au_writew(au_readw(PB1100_G_CONTROL)
+ & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
PB1100_G_CONTROL);
- p_lcd_reg->lcd_control &= ~LCD_CONTROL_GO;
+ }
#endif
au_sync();
break;
@@ -348,49 +310,87 @@
return 0;
}
-static void au1100_set_disp(const void *unused, struct display *disp,
- struct fb_info_gen *info)
+/* fb_pan_display
+ * Pan display in x and/or y as specified
+ */
+int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
- disp->screen_base = (char *)fb_info.fb_virt_start;
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ int dy;
- switch (disp->var.bits_per_pixel) {
-#ifdef FBCON_HAS_CFB8
- case 8:
- disp->dispsw = &fbcon_cfb8;
- if (fb_info.nohwcursor)
- fbcon_cfb8.cursor = au1100_nocursor;
- break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 16:
- disp->dispsw = &fbcon_cfb16;
- disp->dispsw_data = fb_info.fbcon_cmap16;
- if (fb_info.nohwcursor)
- fbcon_cfb16.cursor = au1100_nocursor;
- break;
-#endif
- default:
- disp->dispsw = &fbcon_dummy;
- disp->dispsw_data = NULL;
- break;
+ print_dbg("fb_pan_display %p %p", var, fbi);
+
+ if (!var || !fbdev) {
+ return -EINVAL;
+ }
+
+ if (var->xoffset - fbi->var.xoffset) {
+ /* No support for X panning for now! */
+ return -EINVAL;
+ }
+
+ print_dbg("fb_pan_display 2 %p %p", var, fbi);
+ dy = var->yoffset - fbi->var.yoffset;
+ if (dy) {
+
+ u32 dmaaddr;
+
+ print_dbg("Panning screen of %d lines", dy);
+
+ dmaaddr = fbdev->regs->lcd_dmaaddr0;
+ dmaaddr += (fbi->fix.line_length * dy);
+
+ /* TODO: Wait for current frame to finished */
+ fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
+
+ if (panel_is_dual(fbdev->panel)) {
+ dmaaddr = fbdev->regs->lcd_dmaaddr1;
+ dmaaddr += (fbi->fix.line_length * dy);
+ fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
+ }
+ }
+ print_dbg("fb_pan_display 3 %p %p", var, fbi);
+
+ return 0;
+}
+
+/* fb_rotate
+ * Rotate the display of this angle. This doesn't seems to be used by the core,
+ * but as our hardware supports it, so why not implementing it...
+ */
+void au1100fb_fb_rotate(struct fb_info *fbi, int angle)
+{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+ print_dbg("fb_rotate %p %d", fbi, angle);
+
+ if (fbdev && (angle > 0) && !(angle % 90)) {
+
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+
+ fbdev->regs->lcd_control &= ~(LCD_CONTROL_SM_MASK);
+ fbdev->regs->lcd_control |= ((angle/90) << LCD_CONTROL_SM_BIT);
+
+ fbdev->regs->lcd_control |= LCD_CONTROL_GO;
}
}
-static int
-au1100fb_mmap(struct fb_info *_fb,
- struct file *file,
- struct vm_area_struct *vma)
+/* fb_mmap
+ * Map video memory in user space. We don't use the generic fb_mmap method mainly
+ * to allow the use of the TLB streaming flag (CCA=6)
+ */
+int au1100fb_fb_mmap(struct fb_info *fbi, struct file *file, struct vm_area_struct *vma)
{
+ struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
unsigned int len;
unsigned long start=0, off;
- struct au1100fb_info *fb = (struct au1100fb_info *)_fb;
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
return -EINVAL;
}
- start = fb_info.fb_phys & PAGE_MASK;
- len = PAGE_ALIGN((start & ~PAGE_MASK) + fb_info.fb_size);
+ start = fbdev->fb_phys & PAGE_MASK;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
off = vma->vm_pgoff << PAGE_SHIFT;
@@ -401,276 +401,309 @@
off += start;
vma->vm_pgoff = off >> PAGE_SHIFT;
- pgprot_val(vma->vm_page_prot) &= ~_CACHE_MASK;
- //pgprot_val(vma->vm_page_prot) |= _CACHE_CACHABLE_NONCOHERENT;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6
- /* This is an IO map - tell maydump to skip this VMA */
vma->vm_flags |= VM_IO;
- if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+ if (io_remap_page_range(vma, vma->vm_start, off,
vma->vm_end - vma->vm_start,
vma->vm_page_prot)) {
return -EAGAIN;
}
- fb->mmaped = 1;
return 0;
}
-int au1100_pan_display(const struct fb_var_screeninfo *var,
- struct fb_info_gen *info)
+static struct fb_ops au1100fb_ops =
{
- return 0;
-}
-
-static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
- u_long arg, int con, struct fb_info *info)
-{
- /* nothing to do yet */
- return -EINVAL;
-}
-
-static struct fbgen_hwswitch au1100_switch = {
- au1100_detect,
- au1100_encode_fix,
- au1100_decode_var,
- au1100_encode_var,
- au1100_get_par,
- au1100_set_par,
- au1100_getcolreg,
- au1100_setcolreg,
- au1100_pan_display,
- au1100_blank,
- au1100_set_disp
+ .owner = THIS_MODULE,
+ .fb_setcolreg = au1100fb_fb_setcolreg,
+ .fb_blank = au1100fb_fb_blank,
+ .fb_pan_display = au1100fb_fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_rotate = au1100fb_fb_rotate,
+ .fb_mmap = au1100fb_fb_mmap,
};
-int au1100_setmode(void)
+/*-------------------------------------------------------------------------*/
+
+/* AU1100 LCD controller device driver */
+
+int au1100fb_drv_probe(struct device *dev)
{
- int words;
-
- /* FIXME Need to accomodate for swivel mode and 12bpp, <8bpp*/
- switch (p_lcd->mode_control & LCD_CONTROL_SM)
- {
- case LCD_CONTROL_SM_0:
- case LCD_CONTROL_SM_180:
- words = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 32;
- break;
- case LCD_CONTROL_SM_90:
- case LCD_CONTROL_SM_270:
- /* is this correct? */
- words = (p_lcd->xres * p_lcd->bpp) / 8;
- break;
- default:
- printk("mode_control reg not initialized\n");
- return -EINVAL;
- }
-
- /*
- * Setup LCD controller
- */
-
- p_lcd_reg->lcd_control = p_lcd->mode_control;
- p_lcd_reg->lcd_intstatus = 0;
- p_lcd_reg->lcd_intenable = 0;
- p_lcd_reg->lcd_horztiming = p_lcd->mode_horztiming;
- p_lcd_reg->lcd_verttiming = p_lcd->mode_verttiming;
- p_lcd_reg->lcd_clkcontrol = p_lcd->mode_clkcontrol;
- p_lcd_reg->lcd_words = words - 1;
- p_lcd_reg->lcd_dmaaddr0 = fb_info.fb_phys;
-
- /* turn on panel */
-#ifdef CONFIG_MIPS_PB1100
- au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight,
- PB1100_G_CONTROL);
-#endif
-#ifdef CONFIG_MIPS_HYDROGEN3
- /* Turn controller & power supply on, GPIO213 */
- au_writel(0x20002000, 0xB1700008);
- au_writel(0x00040000, 0xB1900108);
- au_writel(0x01000100, 0xB1700008);
-#endif
-
- p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
-
- return 0;
-}
-
-
-int __init au1100fb_init(void)
-{
- uint32 sys_clksrc;
+ struct au1100fb_device *fbdev = NULL;
+ struct resource *regs_res;
unsigned long page;
+ u32 sys_clksrc;
- /*
- * Get the panel information/display mode and update the registry
- */
- p_lcd = &panels[my_lcd_index];
+ if (!dev)
+ return -EINVAL;
- switch (p_lcd->mode_control & LCD_CONTROL_SM)
- {
- case LCD_CONTROL_SM_0:
- case LCD_CONTROL_SM_180:
- p_lcd->xres =
- (p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1;
- p_lcd->yres =
- (p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1;
- break;
- case LCD_CONTROL_SM_90:
- case LCD_CONTROL_SM_270:
- p_lcd->yres =
- (p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1;
- p_lcd->xres =
- (p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1;
- break;
- }
-
- /*
- * Panel dimensions x bpp must be divisible by 32
- */
- if (((p_lcd->yres * p_lcd->bpp) % 32) != 0)
- printk("VERT %% 32\n");
- if (((p_lcd->xres * p_lcd->bpp) % 32) != 0)
- printk("HORZ %% 32\n");
-
- /*
- * Allocate LCD framebuffer from system memory
- */
- fb_info.fb_size = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 8;
-
- current_par.var.xres = p_lcd->xres;
- current_par.var.xres_virtual = p_lcd->xres;
- current_par.var.yres = p_lcd->yres;
- current_par.var.yres_virtual = p_lcd->yres;
- current_par.var.bits_per_pixel = p_lcd->bpp;
-
- /* FIX!!! only works for 8/16 bpp */
- current_par.line_length = p_lcd->xres * p_lcd->bpp / 8; /* in bytes */
- fb_info.fb_virt_start = (unsigned long )
- __get_free_pages(GFP_ATOMIC | GFP_DMA,
- get_order(fb_info.fb_size + 0x1000));
- if (!fb_info.fb_virt_start) {
- printk("Unable to allocate fb memory\n");
+ /* Allocate new device private */
+ if (!(fbdev = kmalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) {
+ print_err("fail to allocate device private record");
return -ENOMEM;
}
- fb_info.fb_phys = virt_to_bus((void *)fb_info.fb_virt_start);
+ memset((void*)fbdev, 0, sizeof(struct au1100fb_device));
+
+ fbdev->panel = &known_lcd_panels[drv_info.panel_idx];
+
+ dev_set_drvdata(dev, (void*)fbdev);
+
+ /* Allocate region for our registers and map them */
+ if (!(regs_res = platform_get_resource(to_platform_device(dev),
+ IORESOURCE_MEM, 0))) {
+ print_err("fail to retrieve registers resource");
+ return -EFAULT;
+ }
+
+ au1100fb_fix.mmio_start = regs_res->start;
+ au1100fb_fix.mmio_len = regs_res->end - regs_res->start + 1;
+
+ if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
+ DRIVER_NAME)) {
+ print_err("fail to lock memory region at 0x%08x",
+ au1100fb_fix.mmio_start);
+ return -EBUSY;
+ }
+
+ fbdev->regs = (struct au1100fb_regs*)KSEG1ADDR(au1100fb_fix.mmio_start);
+
+ print_dbg("Register memory map at %p", fbdev->regs);
+ print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len);
+
+
+
+ /* Allocate the framebuffer to the maximum screen size * nbr of video buffers */
+ fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
+ (fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
+
+ fbdev->fb_mem = dma_alloc_coherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ &fbdev->fb_phys, GFP_KERNEL);
+ if (!fbdev->fb_mem) {
+ print_err("fail to allocate frambuffer (size: %dK))",
+ fbdev->fb_len / 1024);
+ return -ENOMEM;
+ }
+
+ au1100fb_fix.smem_start = fbdev->fb_phys;
+ au1100fb_fix.smem_len = fbdev->fb_len;
/*
* Set page reserved so that mmap will work. This is necessary
* since we'll be remapping normal memory.
*/
- for (page = fb_info.fb_virt_start;
- page < PAGE_ALIGN(fb_info.fb_virt_start + fb_info.fb_size);
+ for (page = (unsigned long)fbdev->fb_mem;
+ page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len);
page += PAGE_SIZE) {
+#if CONFIG_DMA_NONCOHERENT
+ SetPageReserved(virt_to_page(CAC_ADDR(page)));
+#else
SetPageReserved(virt_to_page(page));
+#endif
}
- memset((void *)fb_info.fb_virt_start, 0, fb_info.fb_size);
+ print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
+ print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
- /* set freqctrl now to allow more time to stabilize */
- /* zero-out out LCD bits */
- sys_clksrc = au_readl(SYS_CLKSRC) & ~0x000003e0;
- sys_clksrc |= p_lcd->mode_toyclksrc;
- au_writel(sys_clksrc, SYS_CLKSRC);
+ /* Setup LCD clock to AUX (48 MHz) */
+ sys_clksrc = au_readl(SYS_CLKSRC) & ~(SYS_CS_ML_MASK | SYS_CS_DL | SYS_CS_CL);
+ au_writel((sys_clksrc | (1 << SYS_CS_ML_BIT)), SYS_CLKSRC);
- /* FIXME add check to make sure auxpll is what is expected! */
- au1100_setmode();
+ /* load the panel info into the var struct */
+ au1100fb_var.bits_per_pixel = fbdev->panel->bpp;
+ au1100fb_var.xres = fbdev->panel->xres;
+ au1100fb_var.xres_virtual = au1100fb_var.xres;
+ au1100fb_var.yres = fbdev->panel->yres;
+ au1100fb_var.yres_virtual = au1100fb_var.yres;
- fb_info.gen.parsize = sizeof(struct au1100fb_par);
- fb_info.gen.fbhw = &au1100_switch;
+ fbdev->info.screen_base = fbdev->fb_mem;
+ fbdev->info.fbops = &au1100fb_ops;
+ fbdev->info.fix = au1100fb_fix;
- strcpy(fb_info.gen.info.modename, "Au1100 LCD");
- fb_info.gen.info.changevar = NULL;
- fb_info.gen.info.node = -1;
+ if (!(fbdev->info.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL))) {
+ return -ENOMEM;
+ }
+ memset(fbdev->info.pseudo_palette, 0, sizeof(u32) * 16);
- fb_info.gen.info.fbops = &au1100fb_ops;
- fb_info.gen.info.disp = &disp;
- fb_info.gen.info.switch_con = &fbgen_switch;
- fb_info.gen.info.updatevar = &fbgen_update_var;
- fb_info.gen.info.blank = &fbgen_blank;
- fb_info.gen.info.flags = FBINFO_FLAG_DEFAULT;
+ if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
+ print_err("Fail to allocate colormap (%d entries)",
+ AU1100_LCD_NBR_PALETTE_ENTRIES);
+ kfree(fbdev->info.pseudo_palette);
+ return -EFAULT;
+ }
- /* This should give a reasonable default video mode */
- fbgen_get_var(&disp.var, -1, &fb_info.gen.info);
- fbgen_do_set_var(&disp.var, 1, &fb_info.gen);
- fbgen_set_disp(-1, &fb_info.gen);
- fbgen_install_cmap(0, &fb_info.gen);
- if (register_framebuffer(&fb_info.gen.info) < 0)
- return -EINVAL;
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- GET_FB_IDX(fb_info.gen.info.node),
- fb_info.gen.info.modename);
+ fbdev->info.var = au1100fb_var;
+
+ /* Set h/w registers */
+ au1100fb_setmode(fbdev);
+
+ /* Register new framebuffer */
+ if (register_framebuffer(&fbdev->info) < 0) {
+ print_err("cannot register new framebuffer");
+ goto failed;
+ }
+
+ return 0;
+
+failed:
+ if (fbdev->regs) {
+ release_mem_region(fbdev->regs_phys, fbdev->regs_len);
+ }
+ if (fbdev->fb_mem) {
+ dma_free_noncoherent(dev, fbdev->fb_len, fbdev->fb_mem, fbdev->fb_phys);
+ }
+ if (fbdev->info.cmap.len != 0) {
+ fb_dealloc_cmap(&fbdev->info.cmap);
+ }
+ kfree(fbdev);
+ dev_set_drvdata(dev, NULL);
return 0;
}
-
-void au1100fb_cleanup(struct fb_info *info)
+int au1100fb_drv_remove(struct device *dev)
{
- unregister_framebuffer(info);
+ struct au1100fb_device *fbdev = NULL;
+
+ if (!dev)
+ return -ENODEV;
+
+ fbdev = (struct au1100fb_device*) dev_get_drvdata(dev);
+
+#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
+ au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
+#endif
+ fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+
+ /* Clean up all probe data */
+ unregister_framebuffer(&fbdev->info);
+
+ release_mem_region(fbdev->regs_phys, fbdev->regs_len);
+
+ dma_free_coherent(dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, fbdev->fb_phys);
+
+ fb_dealloc_cmap(&fbdev->info.cmap);
+ kfree(fbdev->info.pseudo_palette);
+ kfree((void*)fbdev);
+
+ return 0;
}
+int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+ /* TODO */
+ return 0;
+}
-void au1100fb_setup(char *options, int *ints)
+int au1100fb_drv_resume(struct device *dev, u32 level)
+{
+ /* TODO */
+ return 0;
+}
+
+static struct device_driver au1100fb_driver = {
+ .name = "au1100-lcd",
+ .bus = &platform_bus_type,
+
+ .probe = au1100fb_drv_probe,
+ .remove = au1100fb_drv_remove,
+ .suspend = au1100fb_drv_suspend,
+ .resume = au1100fb_drv_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Kernel driver */
+
+int au1100fb_setup(char *options)
{
char* this_opt;
- int i;
- int num_panels = sizeof(panels)/sizeof(struct known_lcd_panels);
+ int num_panels = ARRAY_SIZE(known_lcd_panels);
+ char* mode = NULL;
+ int panel_idx = 0;
-
- if (!options || !*options)
- return;
-
- for(this_opt=strtok(options, ","); this_opt;
- this_opt=strtok(NULL, ",")) {
- if (!strncmp(this_opt, "panel:", 6)) {
-#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100)
- /* Read Pb1100 Switch S10 ? */
- if (!strncmp(this_opt+6, "s10", 3))
- {
- int panel;
- panel = *(volatile int *)0xAE000008; /* BCSR SWITCHES */
- panel >>= 8;
- panel &= 0x0F;
- if (panel >= num_panels) panel = 0;
- my_lcd_index = panel;
+ if (num_panels <= 0) {
+ print_err("No LCD panels supported by driver!");
+ return -EFAULT;
}
- else
-#endif
- /* Get the panel name, everything else if fixed */
- for (i=0; i<num_panels; i++) {
- if (!strncmp(this_opt+6, panels[i].panel_name,
+
+ if (options) {
+ while ((this_opt = strsep(&options,",")) != NULL) {
+ /* Panel option */
+ if (!strncmp(this_opt, "panel:", 6)) {
+ int i;
+ this_opt += 6;
+ for (i = 0; i < num_panels; i++) {
+ if (!strncmp(this_opt,
+ known_lcd_panels[i].name,
strlen(this_opt))) {
- my_lcd_index = i;
+ panel_idx = i;
break;
}
}
+ if (i >= num_panels) {
+ print_warn("Panel %s not supported!", this_opt);
+ }
+ }
+ /* Mode option (only option that start with digit) */
+ else if (isdigit(this_opt[0])) {
+ mode = kmalloc(strlen(this_opt) + 1, GFP_KERNEL);
+ strncpy(mode, this_opt, strlen(this_opt) + 1);
+ }
+ /* Unsupported option */
+ else {
+ print_warn("Unsupported option \"%s\"", this_opt);
}
- else if (!strncmp(this_opt, "nohwcursor", 10)) {
- printk("nohwcursor\n");
- fb_info.nohwcursor = 1;
}
}
- printk("au1100fb: Panel %d %s\n", my_lcd_index,
- panels[my_lcd_index].panel_name);
+ drv_info.panel_idx = panel_idx;
+ drv_info.opt_mode = mode;
+
+ print_info("Panel=%s Mode=%s",
+ known_lcd_panels[drv_info.panel_idx].name,
+ drv_info.opt_mode ? drv_info.opt_mode : "default");
+
+ return 0;
}
+int __init au1100fb_init(void)
+{
+ char* options;
+ int ret;
+ print_info("" DRIVER_DESC "");
-#ifdef MODULE
+ memset(&drv_info, 0, sizeof(drv_info));
+
+ if (fb_get_options(DRIVER_NAME, &options))
+ return -ENODEV;
+
+ /* Setup driver with options */
+ ret = au1100fb_setup(options);
+ if (ret < 0) {
+ print_err("Fail to setup driver");
+ return ret;
+ }
+
+ return driver_register(&au1100fb_driver);
+}
+
+void __exit au1100fb_cleanup(void)
+{
+ driver_unregister(&au1100fb_driver);
+
+ if (drv_info.opt_mode)
+ kfree(drv_info.opt_mode);
+}
+
+module_init(au1100fb_init);
+module_exit(au1100fb_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-int init_module(void)
-{
- return au1100fb_init();
-}
-
-void cleanup_module(void)
-{
- au1100fb_cleanup(void);
-}
-
-MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>");
-MODULE_DESCRIPTION("Au1100 LCD framebuffer device driver");
-#endif /* MODULE */
diff --git a/drivers/video/au1100fb.h b/drivers/video/au1100fb.h
index 657c560..2855534 100644
--- a/drivers/video/au1100fb.h
+++ b/drivers/video/au1100fb.h
@@ -30,352 +30,352 @@
#ifndef _AU1100LCD_H
#define _AU1100LCD_H
-/********************************************************************/
-#define uint32 unsigned long
-typedef volatile struct
-{
- uint32 lcd_control;
- uint32 lcd_intstatus;
- uint32 lcd_intenable;
- uint32 lcd_horztiming;
- uint32 lcd_verttiming;
- uint32 lcd_clkcontrol;
- uint32 lcd_dmaaddr0;
- uint32 lcd_dmaaddr1;
- uint32 lcd_words;
- uint32 lcd_pwmdiv;
- uint32 lcd_pwmhi;
- uint32 reserved[(0x0400-0x002C)/4];
- uint32 lcd_pallettebase[256];
+#include <asm/mach-au1x00/au1000.h>
-} AU1100_LCD;
+#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
+#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
+#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
-/********************************************************************/
-
-#define AU1100_LCD_ADDR 0xB5000000
-
-/*
- * Register bit definitions
- */
-
-/* lcd_control */
-#define LCD_CONTROL_SBPPF (7<<18)
-#define LCD_CONTROL_SBPPF_655 (0<<18)
-#define LCD_CONTROL_SBPPF_565 (1<<18)
-#define LCD_CONTROL_SBPPF_556 (2<<18)
-#define LCD_CONTROL_SBPPF_1555 (3<<18)
-#define LCD_CONTROL_SBPPF_5551 (4<<18)
-#define LCD_CONTROL_WP (1<<17)
-#define LCD_CONTROL_WD (1<<16)
-#define LCD_CONTROL_C (1<<15)
-#define LCD_CONTROL_SM (3<<13)
-#define LCD_CONTROL_SM_0 (0<<13)
-#define LCD_CONTROL_SM_90 (1<<13)
-#define LCD_CONTROL_SM_180 (2<<13)
-#define LCD_CONTROL_SM_270 (3<<13)
-#define LCD_CONTROL_DB (1<<12)
-#define LCD_CONTROL_CCO (1<<11)
-#define LCD_CONTROL_DP (1<<10)
-#define LCD_CONTROL_PO (3<<8)
-#define LCD_CONTROL_PO_00 (0<<8)
-#define LCD_CONTROL_PO_01 (1<<8)
-#define LCD_CONTROL_PO_10 (2<<8)
-#define LCD_CONTROL_PO_11 (3<<8)
-#define LCD_CONTROL_MPI (1<<7)
-#define LCD_CONTROL_PT (1<<6)
-#define LCD_CONTROL_PC (1<<5)
-#define LCD_CONTROL_BPP (7<<1)
-#define LCD_CONTROL_BPP_1 (0<<1)
-#define LCD_CONTROL_BPP_2 (1<<1)
-#define LCD_CONTROL_BPP_4 (2<<1)
-#define LCD_CONTROL_BPP_8 (3<<1)
-#define LCD_CONTROL_BPP_12 (4<<1)
-#define LCD_CONTROL_BPP_16 (5<<1)
-#define LCD_CONTROL_GO (1<<0)
-
-/* lcd_intstatus, lcd_intenable */
-#define LCD_INT_SD (1<<7)
-#define LCD_INT_OF (1<<6)
-#define LCD_INT_UF (1<<5)
-#define LCD_INT_SA (1<<3)
-#define LCD_INT_SS (1<<2)
-#define LCD_INT_S1 (1<<1)
-#define LCD_INT_S0 (1<<0)
-
-/* lcd_horztiming */
-#define LCD_HORZTIMING_HN2 (255<<24)
-#define LCD_HORZTIMING_HN2_N(N) (((N)-1)<<24)
-#define LCD_HORZTIMING_HN1 (255<<16)
-#define LCD_HORZTIMING_HN1_N(N) (((N)-1)<<16)
-#define LCD_HORZTIMING_HPW (63<<10)
-#define LCD_HORZTIMING_HPW_N(N) (((N)-1)<<10)
-#define LCD_HORZTIMING_PPL (1023<<0)
-#define LCD_HORZTIMING_PPL_N(N) (((N)-1)<<0)
-
-/* lcd_verttiming */
-#define LCD_VERTTIMING_VN2 (255<<24)
-#define LCD_VERTTIMING_VN2_N(N) (((N)-1)<<24)
-#define LCD_VERTTIMING_VN1 (255<<16)
-#define LCD_VERTTIMING_VN1_N(N) (((N)-1)<<16)
-#define LCD_VERTTIMING_VPW (63<<10)
-#define LCD_VERTTIMING_VPW_N(N) (((N)-1)<<10)
-#define LCD_VERTTIMING_LPP (1023<<0)
-#define LCD_VERTTIMING_LPP_N(N) (((N)-1)<<0)
-
-/* lcd_clkcontrol */
-#define LCD_CLKCONTROL_IB (1<<18)
-#define LCD_CLKCONTROL_IC (1<<17)
-#define LCD_CLKCONTROL_IH (1<<16)
-#define LCD_CLKCONTROL_IV (1<<15)
-#define LCD_CLKCONTROL_BF (31<<10)
-#define LCD_CLKCONTROL_BF_N(N) (((N)-1)<<10)
-#define LCD_CLKCONTROL_PCD (1023<<0)
-#define LCD_CLKCONTROL_PCD_N(N) ((N)<<0)
-
-/* lcd_pwmdiv */
-#define LCD_PWMDIV_EN (1<<12)
-#define LCD_PWMDIV_PWMDIV (2047<<0)
-#define LCD_PWMDIV_PWMDIV_N(N) (((N)-1)<<0)
-
-/* lcd_pwmhi */
-#define LCD_PWMHI_PWMHI1 (2047<<12)
-#define LCD_PWMHI_PWMHI1_N(N) ((N)<<12)
-#define LCD_PWMHI_PWMHI0 (2047<<0)
-#define LCD_PWMHI_PWMHI0_N(N) ((N)<<0)
-
-/* lcd_pallettebase - MONOCHROME */
-#define LCD_PALLETTE_MONO_MI (15<<0)
-#define LCD_PALLETTE_MONO_MI_N(N) ((N)<<0)
-
-/* lcd_pallettebase - COLOR */
-#define LCD_PALLETTE_COLOR_BI (15<<8)
-#define LCD_PALLETTE_COLOR_BI_N(N) ((N)<<8)
-#define LCD_PALLETTE_COLOR_GI (15<<4)
-#define LCD_PALLETTE_COLOR_GI_N(N) ((N)<<4)
-#define LCD_PALLETTE_COLOR_RI (15<<0)
-#define LCD_PALLETTE_COLOR_RI_N(N) ((N)<<0)
-
-/* lcd_palletebase - COLOR TFT PALLETIZED */
-#define LCD_PALLETTE_TFT_DC (65535<<0)
-#define LCD_PALLETTE_TFT_DC_N(N) ((N)<<0)
-
-/********************************************************************/
-
-struct known_lcd_panels
-{
- uint32 xres;
- uint32 yres;
- uint32 bpp;
- unsigned char panel_name[256];
- uint32 mode_control;
- uint32 mode_horztiming;
- uint32 mode_verttiming;
- uint32 mode_clkcontrol;
- uint32 mode_pwmdiv;
- uint32 mode_pwmhi;
- uint32 mode_toyclksrc;
- uint32 mode_backlight;
-
-};
-
-#if defined(__BIG_ENDIAN)
-#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_11
+#if DEBUG
+#define print_dbg(f, arg...) printk(__FILE__ ": " f "\n", ## arg)
#else
-#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_00
+#define print_dbg(f, arg...) do {} while (0)
#endif
-/*
- * The fb driver assumes that AUX PLL is at 48MHz. That can
- * cover up to 800x600 resolution; if you need higher resolution,
- * you should modify the driver as needed, not just this structure.
- */
-struct known_lcd_panels panels[] =
-{
- { /* 0: Pb1100 LCDA: Sharp 320x240 TFT panel */
- 320, /* xres */
- 240, /* yres */
- 16, /* bpp */
+#if defined(__BIG_ENDIAN)
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
+#else
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
+#endif
+#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
- "Sharp_320x240_16",
- /* mode_control */
+/********************************************************************/
+
+/* LCD controller restrictions */
+#define AU1100_LCD_MAX_XRES 800
+#define AU1100_LCD_MAX_YRES 600
+#define AU1100_LCD_MAX_BPP 16
+#define AU1100_LCD_MAX_CLK 48000000
+#define AU1100_LCD_NBR_PALETTE_ENTRIES 256
+
+/* Default number of visible screen buffer to allocate */
+#define AU1100FB_NBR_VIDEO_BUFFERS 4
+
+/********************************************************************/
+
+struct au1100fb_panel
+{
+ const char name[25]; /* Full name <vendor>_<model> */
+
+ u32 control_base; /* Mode-independent control values */
+ u32 clkcontrol_base; /* Panel pixclock preferences */
+
+ u32 horztiming;
+ u32 verttiming;
+
+ u32 xres; /* Maximum horizontal resolution */
+ u32 yres; /* Maximum vertical resolution */
+ u32 bpp; /* Maximum depth supported */
+};
+
+struct au1100fb_regs
+{
+ u32 lcd_control;
+ u32 lcd_intstatus;
+ u32 lcd_intenable;
+ u32 lcd_horztiming;
+ u32 lcd_verttiming;
+ u32 lcd_clkcontrol;
+ u32 lcd_dmaaddr0;
+ u32 lcd_dmaaddr1;
+ u32 lcd_words;
+ u32 lcd_pwmdiv;
+ u32 lcd_pwmhi;
+ u32 reserved[(0x0400-0x002C)/4];
+ u32 lcd_pallettebase[256];
+};
+
+struct au1100fb_device {
+
+ struct fb_info info; /* FB driver info record */
+
+ struct au1100fb_panel *panel; /* Panel connected to this device */
+
+ struct au1100fb_regs* regs; /* Registers memory map */
+ size_t regs_len;
+ unsigned int regs_phys;
+
+ unsigned char* fb_mem; /* FrameBuffer memory map */
+ size_t fb_len;
+ dma_addr_t fb_phys;
+};
+
+/********************************************************************/
+
+#define LCD_CONTROL (AU1100_LCD_BASE + 0x0)
+ #define LCD_CONTROL_SBB_BIT 21
+ #define LCD_CONTROL_SBB_MASK (0x3 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBB_1 (0 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBB_2 (1 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBB_3 (2 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBB_4 (3 << LCD_CONTROL_SBB_BIT)
+ #define LCD_CONTROL_SBPPF_BIT 18
+ #define LCD_CONTROL_SBPPF_MASK (0x7 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_655 (0 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_565 (1 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_556 (2 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_1555 (3 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_SBPPF_5551 (4 << LCD_CONTROL_SBPPF_BIT)
+ #define LCD_CONTROL_WP (1<<17)
+ #define LCD_CONTROL_WD (1<<16)
+ #define LCD_CONTROL_C (1<<15)
+ #define LCD_CONTROL_SM_BIT 13
+ #define LCD_CONTROL_SM_MASK (0x3 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_SM_0 (0 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_SM_90 (1 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_SM_180 (2 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_SM_270 (3 << LCD_CONTROL_SM_BIT)
+ #define LCD_CONTROL_DB (1<<12)
+ #define LCD_CONTROL_CCO (1<<11)
+ #define LCD_CONTROL_DP (1<<10)
+ #define LCD_CONTROL_PO_BIT 8
+ #define LCD_CONTROL_PO_MASK (0x3 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_PO_00 (0 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_PO_01 (1 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_PO_10 (2 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_PO_11 (3 << LCD_CONTROL_PO_BIT)
+ #define LCD_CONTROL_MPI (1<<7)
+ #define LCD_CONTROL_PT (1<<6)
+ #define LCD_CONTROL_PC (1<<5)
+ #define LCD_CONTROL_BPP_BIT 1
+ #define LCD_CONTROL_BPP_MASK (0x7 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_1 (0 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_2 (1 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_4 (2 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_8 (3 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_12 (4 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_BPP_16 (5 << LCD_CONTROL_BPP_BIT)
+ #define LCD_CONTROL_GO (1<<0)
+
+#define LCD_INTSTATUS (AU1100_LCD_BASE + 0x4)
+#define LCD_INTENABLE (AU1100_LCD_BASE + 0x8)
+ #define LCD_INT_SD (1<<7)
+ #define LCD_INT_OF (1<<6)
+ #define LCD_INT_UF (1<<5)
+ #define LCD_INT_SA (1<<3)
+ #define LCD_INT_SS (1<<2)
+ #define LCD_INT_S1 (1<<1)
+ #define LCD_INT_S0 (1<<0)
+
+#define LCD_HORZTIMING (AU1100_LCD_BASE + 0xC)
+ #define LCD_HORZTIMING_HN2_BIT 24
+ #define LCD_HORZTIMING_HN2_MASK (0xFF << LCD_HORZTIMING_HN2_BIT)
+ #define LCD_HORZTIMING_HN2_N(N) ((((N)-1) << LCD_HORZTIMING_HN2_BIT) & LCD_HORZTIMING_HN2_MASK)
+ #define LCD_HORZTIMING_HN1_BIT 16
+ #define LCD_HORZTIMING_HN1_MASK (0xFF << LCD_HORZTIMING_HN1_BIT)
+ #define LCD_HORZTIMING_HN1_N(N) ((((N)-1) << LCD_HORZTIMING_HN1_BIT) & LCD_HORZTIMING_HN1_MASK)
+ #define LCD_HORZTIMING_HPW_BIT 10
+ #define LCD_HORZTIMING_HPW_MASK (0x3F << LCD_HORZTIMING_HPW_BIT)
+ #define LCD_HORZTIMING_HPW_N(N) ((((N)-1) << LCD_HORZTIMING_HPW_BIT) & LCD_HORZTIMING_HPW_MASK)
+ #define LCD_HORZTIMING_PPL_BIT 0
+ #define LCD_HORZTIMING_PPL_MASK (0x3FF << LCD_HORZTIMING_PPL_BIT)
+ #define LCD_HORZTIMING_PPL_N(N) ((((N)-1) << LCD_HORZTIMING_PPL_BIT) & LCD_HORZTIMING_PPL_MASK)
+
+#define LCD_VERTTIMING (AU1100_LCD_BASE + 0x10)
+ #define LCD_VERTTIMING_VN2_BIT 24
+ #define LCD_VERTTIMING_VN2_MASK (0xFF << LCD_VERTTIMING_VN2_BIT)
+ #define LCD_VERTTIMING_VN2_N(N) ((((N)-1) << LCD_VERTTIMING_VN2_BIT) & LCD_VERTTIMING_VN2_MASK)
+ #define LCD_VERTTIMING_VN1_BIT 16
+ #define LCD_VERTTIMING_VN1_MASK (0xFF << LCD_VERTTIMING_VN1_BIT)
+ #define LCD_VERTTIMING_VN1_N(N) ((((N)-1) << LCD_VERTTIMING_VN1_BIT) & LCD_VERTTIMING_VN1_MASK)
+ #define LCD_VERTTIMING_VPW_BIT 10
+ #define LCD_VERTTIMING_VPW_MASK (0x3F << LCD_VERTTIMING_VPW_BIT)
+ #define LCD_VERTTIMING_VPW_N(N) ((((N)-1) << LCD_VERTTIMING_VPW_BIT) & LCD_VERTTIMING_VPW_MASK)
+ #define LCD_VERTTIMING_LPP_BIT 0
+ #define LCD_VERTTIMING_LPP_MASK (0x3FF << LCD_VERTTIMING_LPP_BIT)
+ #define LCD_VERTTIMING_LPP_N(N) ((((N)-1) << LCD_VERTTIMING_LPP_BIT) & LCD_VERTTIMING_LPP_MASK)
+
+#define LCD_CLKCONTROL (AU1100_LCD_BASE + 0x14)
+ #define LCD_CLKCONTROL_IB (1<<18)
+ #define LCD_CLKCONTROL_IC (1<<17)
+ #define LCD_CLKCONTROL_IH (1<<16)
+ #define LCD_CLKCONTROL_IV (1<<15)
+ #define LCD_CLKCONTROL_BF_BIT 10
+ #define LCD_CLKCONTROL_BF_MASK (0x1F << LCD_CLKCONTROL_BF_BIT)
+ #define LCD_CLKCONTROL_BF_N(N) ((((N)-1) << LCD_CLKCONTROL_BF_BIT) & LCD_CLKCONTROL_BF_MASK)
+ #define LCD_CLKCONTROL_PCD_BIT 0
+ #define LCD_CLKCONTROL_PCD_MASK (0x3FF << LCD_CLKCONTROL_PCD_BIT)
+ #define LCD_CLKCONTROL_PCD_N(N) (((N) << LCD_CLKCONTROL_PCD_BIT) & LCD_CLKCONTROL_PCD_MASK)
+
+#define LCD_DMAADDR0 (AU1100_LCD_BASE + 0x18)
+#define LCD_DMAADDR1 (AU1100_LCD_BASE + 0x1C)
+ #define LCD_DMA_SA_BIT 5
+ #define LCD_DMA_SA_MASK (0x7FFFFFF << LCD_DMA_SA_BIT)
+ #define LCD_DMA_SA_N(N) ((N) & LCD_DMA_SA_MASK)
+
+#define LCD_WORDS (AU1100_LCD_BASE + 0x20)
+ #define LCD_WRD_WRDS_BIT 0
+ #define LCD_WRD_WRDS_MASK (0xFFFFFFFF << LCD_WRD_WRDS_BIT)
+ #define LCD_WRD_WRDS_N(N) ((((N)-1) << LCD_WRD_WRDS_BIT) & LCD_WRD_WRDS_MASK)
+
+#define LCD_PWMDIV (AU1100_LCD_BASE + 0x24)
+ #define LCD_PWMDIV_EN (1<<12)
+ #define LCD_PWMDIV_PWMDIV_BIT 0
+ #define LCD_PWMDIV_PWMDIV_MASK (0xFFF << LCD_PWMDIV_PWMDIV_BIT)
+ #define LCD_PWMDIV_PWMDIV_N(N) ((((N)-1) << LCD_PWMDIV_PWMDIV_BIT) & LCD_PWMDIV_PWMDIV_MASK)
+
+#define LCD_PWMHI (AU1100_LCD_BASE + 0x28)
+ #define LCD_PWMHI_PWMHI1_BIT 12
+ #define LCD_PWMHI_PWMHI1_MASK (0xFFF << LCD_PWMHI_PWMHI1_BIT)
+ #define LCD_PWMHI_PWMHI1_N(N) (((N) << LCD_PWMHI_PWMHI1_BIT) & LCD_PWMHI_PWMHI1_MASK)
+ #define LCD_PWMHI_PWMHI0_BIT 0
+ #define LCD_PWMHI_PWMHI0_MASK (0xFFF << LCD_PWMHI_PWMHI0_BIT)
+ #define LCD_PWMHI_PWMHI0_N(N) (((N) << LCD_PWMHI_PWMHI0_BIT) & LCD_PWMHI_PWMHI0_MASK)
+
+#define LCD_PALLETTEBASE (AU1100_LCD_BASE + 0x400)
+ #define LCD_PALLETTE_MONO_MI_BIT 0
+ #define LCD_PALLETTE_MONO_MI_MASK (0xF << LCD_PALLETTE_MONO_MI_BIT)
+ #define LCD_PALLETTE_MONO_MI_N(N) (((N)<< LCD_PALLETTE_MONO_MI_BIT) & LCD_PALLETTE_MONO_MI_MASK)
+
+ #define LCD_PALLETTE_COLOR_RI_BIT 8
+ #define LCD_PALLETTE_COLOR_RI_MASK (0xF << LCD_PALLETTE_COLOR_RI_BIT)
+ #define LCD_PALLETTE_COLOR_RI_N(N) (((N)<< LCD_PALLETTE_COLOR_RI_BIT) & LCD_PALLETTE_COLOR_RI_MASK)
+ #define LCD_PALLETTE_COLOR_GI_BIT 4
+ #define LCD_PALLETTE_COLOR_GI_MASK (0xF << LCD_PALLETTE_COLOR_GI_BIT)
+ #define LCD_PALLETTE_COLOR_GI_N(N) (((N)<< LCD_PALLETTE_COLOR_GI_BIT) & LCD_PALLETTE_COLOR_GI_MASK)
+ #define LCD_PALLETTE_COLOR_BI_BIT 0
+ #define LCD_PALLETTE_COLOR_BI_MASK (0xF << LCD_PALLETTE_COLOR_BI_BIT)
+ #define LCD_PALLETTE_COLOR_BI_N(N) (((N)<< LCD_PALLETTE_COLOR_BI_BIT) & LCD_PALLETTE_COLOR_BI_MASK)
+
+ #define LCD_PALLETTE_TFT_DC_BIT 0
+ #define LCD_PALLETTE_TFT_DC_MASK (0xFFFF << LCD_PALLETTE_TFT_DC_BIT)
+ #define LCD_PALLETTE_TFT_DC_N(N) (((N)<< LCD_PALLETTE_TFT_DC_BIT) & LCD_PALLETTE_TFT_DC_MASK)
+
+/********************************************************************/
+
+/* List of panels known to work with the AU1100 LCD controller.
+ * To add a new panel, enter the same specifications as the
+ * Generic_TFT one, and MAKE SURE that it doesn't conflicts
+ * with the controller restrictions. Restrictions are:
+ *
+ * STN color panels: max_bpp <= 12
+ * STN mono panels: max_bpp <= 4
+ * TFT panels: max_bpp <= 16
+ * max_xres <= 800
+ * max_yres <= 600
+ */
+static struct au1100fb_panel known_lcd_panels[] =
+{
+ /* 800x600x16bpp CRT */
+ [0] = {
+ .name = "CRT_800x600_16",
+ .xres = 800,
+ .yres = 600,
+ .bpp = 16,
+ .control_base = 0x0004886A |
+ LCD_CONTROL_DEFAULT_PO | LCD_CONTROL_DEFAULT_SBPPF |
+ LCD_CONTROL_BPP_16,
+ .clkcontrol_base = 0x00020000,
+ .horztiming = 0x005aff1f,
+ .verttiming = 0x16000e57,
+ },
+ /* just the standard LCD */
+ [1] = {
+ .name = "WWPC LCD",
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .control_base = 0x0006806A,
+ .horztiming = 0x0A1010EF,
+ .verttiming = 0x0301013F,
+ .clkcontrol_base = 0x00018001,
+ },
+ /* Sharp 320x240 TFT panel */
+ [2] = {
+ .name = "Sharp_LQ038Q5DR01",
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .control_base =
( LCD_CONTROL_SBPPF_565
- /*LCD_CONTROL_WP*/
- /*LCD_CONTROL_WD*/
| LCD_CONTROL_C
| LCD_CONTROL_SM_0
- /*LCD_CONTROL_DB*/
- /*LCD_CONTROL_CCO*/
- /*LCD_CONTROL_DP*/
- | LCD_DEFAULT_PIX_FORMAT
- /*LCD_CONTROL_MPI*/
+ | LCD_CONTROL_DEFAULT_PO
| LCD_CONTROL_PT
| LCD_CONTROL_PC
| LCD_CONTROL_BPP_16 ),
-
- /* mode_horztiming */
+ .horztiming =
( LCD_HORZTIMING_HN2_N(8)
| LCD_HORZTIMING_HN1_N(60)
| LCD_HORZTIMING_HPW_N(12)
| LCD_HORZTIMING_PPL_N(320) ),
-
- /* mode_verttiming */
+ .verttiming =
( LCD_VERTTIMING_VN2_N(5)
| LCD_VERTTIMING_VN1_N(17)
| LCD_VERTTIMING_VPW_N(1)
| LCD_VERTTIMING_LPP_N(240) ),
-
- /* mode_clkcontrol */
- ( 0
- /*LCD_CLKCONTROL_IB*/
- /*LCD_CLKCONTROL_IC*/
- /*LCD_CLKCONTROL_IH*/
- /*LCD_CLKCONTROL_IV*/
- | LCD_CLKCONTROL_PCD_N(1) ),
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (1<<5)),
-
- /* mode_backlight */
- 6
+ .clkcontrol_base = LCD_CLKCONTROL_PCD_N(1),
},
- { /* 1: Pb1100 LCDC 640x480 TFT panel */
- 640, /* xres */
- 480, /* yres */
- 16, /* bpp */
-
- "Generic_640x480_16",
-
- /* mode_control */
- 0x004806a | LCD_DEFAULT_PIX_FORMAT,
-
- /* mode_horztiming */
- 0x3434d67f,
-
- /* mode_verttiming */
- 0x0e0e39df,
-
- /* mode_clkcontrol */
- ( 0
- /*LCD_CLKCONTROL_IB*/
- /*LCD_CLKCONTROL_IC*/
- /*LCD_CLKCONTROL_IH*/
- /*LCD_CLKCONTROL_IV*/
- | LCD_CLKCONTROL_PCD_N(1) ),
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (0<<5)),
-
- /* mode_backlight */
- 7
+ /* Hitachi SP14Q005 and possibly others */
+ [3] = {
+ .name = "Hitachi_SP14Qxxx",
+ .xres = 320,
+ .yres = 240,
+ .bpp = 4,
+ .control_base =
+ ( LCD_CONTROL_C
+ | LCD_CONTROL_BPP_4 ),
+ .horztiming =
+ ( LCD_HORZTIMING_HN2_N(1)
+ | LCD_HORZTIMING_HN1_N(1)
+ | LCD_HORZTIMING_HPW_N(1)
+ | LCD_HORZTIMING_PPL_N(320) ),
+ .verttiming =
+ ( LCD_VERTTIMING_VN2_N(1)
+ | LCD_VERTTIMING_VN1_N(1)
+ | LCD_VERTTIMING_VPW_N(1)
+ | LCD_VERTTIMING_LPP_N(240) ),
+ .clkcontrol_base = LCD_CLKCONTROL_PCD_N(4),
},
- { /* 2: Pb1100 LCDB 640x480 PrimeView TFT panel */
- 640, /* xres */
- 480, /* yres */
- 16, /* bpp */
-
- "PrimeView_640x480_16",
-
- /* mode_control */
- 0x0004886a | LCD_DEFAULT_PIX_FORMAT,
-
- /* mode_horztiming */
- 0x0e4bfe7f,
-
- /* mode_verttiming */
- 0x210805df,
-
- /* mode_clkcontrol */
- 0x00038001,
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (0<<5)),
-
- /* mode_backlight */
- 7
+ /* Generic 640x480 TFT panel */
+ [4] = {
+ .name = "TFT_640x480_16",
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .control_base = 0x004806a | LCD_CONTROL_DEFAULT_PO,
+ .horztiming = 0x3434d67f,
+ .verttiming = 0x0e0e39df,
+ .clkcontrol_base = LCD_CLKCONTROL_PCD_N(1),
},
- { /* 3: Pb1100 800x600x16bpp NEON CRT */
- 800, /* xres */
- 600, /* yres */
- 16, /* bpp */
-
- "NEON_800x600_16",
-
- /* mode_control */
- 0x0004886A | LCD_DEFAULT_PIX_FORMAT,
-
- /* mode_horztiming */
- 0x005AFF1F,
-
- /* mode_verttiming */
- 0x16000E57,
-
- /* mode_clkcontrol */
- 0x00020000,
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (0<<5)),
-
- /* mode_backlight */
- 7
- },
-
- { /* 4: Pb1100 640x480x16bpp NEON CRT */
- 640, /* xres */
- 480, /* yres */
- 16, /* bpp */
-
- "NEON_640x480_16",
-
- /* mode_control */
- 0x0004886A | LCD_DEFAULT_PIX_FORMAT,
-
- /* mode_horztiming */
- 0x0052E27F,
-
- /* mode_verttiming */
- 0x18000DDF,
-
- /* mode_clkcontrol */
- 0x00020000,
-
- /* mode_pwmdiv */
- 0,
-
- /* mode_pwmhi */
- 0,
-
- /* mode_toyclksrc */
- ((1<<7) | (1<<6) | (0<<5)),
-
- /* mode_backlight */
- 7
+ /* Pb1100 LCDB 640x480 PrimeView TFT panel */
+ [5] = {
+ .name = "PrimeView_640x480_16",
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .control_base = 0x0004886a | LCD_CONTROL_DEFAULT_PO,
+ .horztiming = 0x0e4bfe7f,
+ .verttiming = 0x210805df,
+ .clkcontrol_base = 0x00038001,
},
};
+
+struct au1100fb_drv_info {
+ int panel_idx;
+ char *opt_mode;
+};
+
+/********************************************************************/
+
+/* Inline helpers */
+
+#define panel_is_dual(panel) (panel->control_base & LCD_CONTROL_DP)
+#define panel_is_active(panel)(panel->control_base & LCD_CONTROL_PT)
+#define panel_is_color(panel) (panel->control_base & LCD_CONTROL_PC)
+#define panel_swap_rgb(panel) (panel->control_base & LCD_CONTROL_CCO)
+
#endif /* _AU1100LCD_H */
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 3c72c62..1991fdb 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -73,17 +73,15 @@
}
#ifdef CONFIG_PM
-static int corgibl_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgibl_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN)
- corgibl_blank(FB_BLANK_POWERDOWN);
+ corgibl_blank(FB_BLANK_POWERDOWN);
return 0;
}
-static int corgibl_resume(struct device *dev, u32 level)
+static int corgibl_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON)
- corgibl_blank(FB_BLANK_UNBLANK);
+ corgibl_blank(FB_BLANK_UNBLANK);
return 0;
}
#else
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index a304042..3a26f9c 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -275,20 +275,20 @@
#ifdef CONFIG_PCI
#define CHIP(id, btype) \
- { PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_##id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (btype) }
+ { PCI_VENDOR_ID_CIRRUS, id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (btype) }
static struct pci_device_id cirrusfb_pci_table[] = {
- CHIP( CIRRUS_5436, BT_ALPINE ),
- CHIP( CIRRUS_5434_8, BT_ALPINE ),
- CHIP( CIRRUS_5434_4, BT_ALPINE ),
- CHIP( CIRRUS_5430, BT_ALPINE ), /* GD-5440 has identical id */
- CHIP( CIRRUS_7543, BT_ALPINE ),
- CHIP( CIRRUS_7548, BT_ALPINE ),
- CHIP( CIRRUS_5480, BT_GD5480 ), /* MacPicasso probably */
- CHIP( CIRRUS_5446, BT_PICASSO4 ), /* Picasso 4 is a GD5446 */
- CHIP( CIRRUS_5462, BT_LAGUNA ), /* CL Laguna */
- CHIP( CIRRUS_5464, BT_LAGUNA ), /* CL Laguna 3D */
- CHIP( CIRRUS_5465, BT_LAGUNA ), /* CL Laguna 3DA*/
+ CHIP( PCI_DEVICE_ID_CIRRUS_5436, BT_ALPINE ),
+ CHIP( PCI_DEVICE_ID_CIRRUS_5434_8, BT_ALPINE ),
+ CHIP( PCI_DEVICE_ID_CIRRUS_5434_4, BT_ALPINE ),
+ CHIP( PCI_DEVICE_ID_CIRRUS_5430, BT_ALPINE ), /* GD-5440 is same id */
+ CHIP( PCI_DEVICE_ID_CIRRUS_7543, BT_ALPINE ),
+ CHIP( PCI_DEVICE_ID_CIRRUS_7548, BT_ALPINE ),
+ CHIP( PCI_DEVICE_ID_CIRRUS_5480, BT_GD5480 ), /* MacPicasso likely */
+ CHIP( PCI_DEVICE_ID_CIRRUS_5446, BT_PICASSO4 ), /* Picasso 4 is 5446 */
+ CHIP( PCI_DEVICE_ID_CIRRUS_5462, BT_LAGUNA ), /* CL Laguna */
+ CHIP( PCI_DEVICE_ID_CIRRUS_5464, BT_LAGUNA ), /* CL Laguna 3D */
+ CHIP( PCI_DEVICE_ID_CIRRUS_5465, BT_LAGUNA ), /* CL Laguna 3DA*/
{ 0, }
};
MODULE_DEVICE_TABLE(pci, cirrusfb_pci_table);
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index eb83a78..6a9ae2b 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -28,7 +28,7 @@
config VIDEO_SELECT
bool "Video mode selection support"
- depends on (X86 || X86_64) && VGA_CONSOLE
+ depends on X86 && VGA_CONSOLE
---help---
This enables support for text mode selection on kernel startup. If
you want to take advantage of some high-resolution text mode your
@@ -110,7 +110,7 @@
config FONTS
bool "Select compiled-in fonts"
- depends on FRAMEBUFFER_CONSOLE
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
help
Say Y here if you would like to use fonts other than the default
your frame buffer console usually use.
@@ -123,7 +123,7 @@
config FONT_8x8
bool "VGA 8x8 font" if FONTS
- depends on FRAMEBUFFER_CONSOLE
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
default y if !SPARC32 && !SPARC64 && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
@@ -137,7 +137,7 @@
config FONT_8x16
bool "VGA 8x16 font" if FONTS
- depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || USB_SISUSBVGA_CON
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
default y if !SPARC32 && !SPARC64 && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
@@ -147,7 +147,7 @@
config FONT_6x11
bool "Mac console 6x11 font (not supported by all drivers)" if FONTS
- depends on FRAMEBUFFER_CONSOLE
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
default y if !SPARC32 && !SPARC64 && !FONTS && MAC
help
Small console font with Macintosh-style high-half glyphs. Some Mac
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index e793ffd..762c7a5 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -32,7 +32,6 @@
#include <linux/font.h>
-extern struct font_desc font_vga_8x16;
extern unsigned long sgi_gfxaddr;
#define FONT_DATA ((unsigned char *)font_vga_8x16.data)
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index d940f60..a7bcd17 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -511,12 +511,12 @@
struct sti_cooked_font *cooked_font;
if (!fbfont_name || !strlen(fbfont_name))
- return NULL;
+ return NULL;
fbfont = find_font(fbfont_name);
if (!fbfont)
- fbfont = get_default_font(1024,768);
+ fbfont = get_default_font(1024,768);
if (!fbfont)
- return NULL;
+ return NULL;
DPRINTK((KERN_DEBUG "selected %dx%d fb-font %s\n",
fbfont->width, fbfont->height, fbfont->name));
@@ -527,7 +527,7 @@
nf = kmalloc(size, GFP_KERNEL);
if (!nf)
- return NULL;
+ return NULL;
memset(nf, 0, size);
nf->first_char = 0;
@@ -546,8 +546,8 @@
cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
if (!cooked_font) {
- kfree(nf);
- return NULL;
+ kfree(nf);
+ return NULL;
}
cooked_font->raw = nf;
@@ -595,7 +595,7 @@
static void __init
sti_dump_rom(struct sti_rom *rom)
{
- printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n",
+ printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n",
rom->graphics_id[0],
rom->graphics_id[1],
rom->revno[0] >> 4,
@@ -651,15 +651,16 @@
struct sti_cooked_font *font;
int i = 0;
- for(font = rom->font_start; font; font = font->next_font, i++) {
- if((font->raw->width == width) && (font->raw->height == height))
+ for (font = rom->font_start; font; font = font->next_font, i++) {
+ if ((font->raw->width == width) &&
+ (font->raw->height == height))
return i;
}
return 0;
}
-#define BMODE_RELOCATE(offset) offset = (offset) / 4;
-#define BMODE_LAST_ADDR_OFFS 0x50
+#define BMODE_RELOCATE(offset) offset = (offset) / 4;
+#define BMODE_LAST_ADDR_OFFS 0x50
static void * __init
sti_bmode_font_raw(struct sti_cooked_font *f)
@@ -700,35 +701,35 @@
{
struct sti_rom *raw;
u32 size;
- struct sti_rom_font *raw_font, *font_start;
-
+ struct sti_rom_font *raw_font, *font_start;
+
sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size);
-
- size = (size+3) / 4;
+
+ size = (size+3) / 4;
raw = kmalloc(size, GFP_KERNEL);
if (raw) {
- sti_bmode_rom_copy(address, size, raw);
- memmove (&raw->res004, &raw->type[0], 0x3c);
- raw->type[3] = raw->res004;
+ sti_bmode_rom_copy(address, size, raw);
+ memmove (&raw->res004, &raw->type[0], 0x3c);
+ raw->type[3] = raw->res004;
- BMODE_RELOCATE (raw->region_list);
- BMODE_RELOCATE (raw->font_start);
+ BMODE_RELOCATE (raw->region_list);
+ BMODE_RELOCATE (raw->font_start);
- BMODE_RELOCATE (raw->init_graph);
- BMODE_RELOCATE (raw->state_mgmt);
- BMODE_RELOCATE (raw->font_unpmv);
- BMODE_RELOCATE (raw->block_move);
- BMODE_RELOCATE (raw->inq_conf);
+ BMODE_RELOCATE (raw->init_graph);
+ BMODE_RELOCATE (raw->state_mgmt);
+ BMODE_RELOCATE (raw->font_unpmv);
+ BMODE_RELOCATE (raw->block_move);
+ BMODE_RELOCATE (raw->inq_conf);
- raw_font = ((void *)raw) + raw->font_start;
- font_start = raw_font;
+ raw_font = ((void *)raw) + raw->font_start;
+ font_start = raw_font;
- while (raw_font->next_font) {
- BMODE_RELOCATE (raw_font->next_font);
- raw_font = ((void *)font_start) + raw_font->next_font;
- }
+ while (raw_font->next_font) {
+ BMODE_RELOCATE (raw_font->next_font);
+ raw_font = ((void *)font_start) + raw_font->next_font;
+ }
}
- return raw;
+ return raw;
}
struct sti_rom * __init
@@ -736,15 +737,15 @@
{
struct sti_rom *raw;
unsigned long size;
-
+
/* read the ROM size directly from the struct in ROM */
size = gsc_readl(address + offsetof(struct sti_rom,last_addr));
raw = kmalloc(size, GFP_KERNEL);
- if(raw)
- sti_rom_copy(address, size, raw);
+ if (raw)
+ sti_rom_copy(address, size, raw);
- return raw;
+ return raw;
}
int __init
@@ -757,14 +758,14 @@
if (!cooked)
goto out_err;
- if (wordmode)
- raw = sti_get_wmode_rom (address);
- else
- raw = sti_get_bmode_rom (address);
+ if (wordmode)
+ raw = sti_get_wmode_rom (address);
+ else
+ raw = sti_get_bmode_rom (address);
- if (!raw)
- goto out_err;
-
+ if (!raw)
+ goto out_err;
+
if (!sti_cook_fonts(cooked, raw)) {
printk(KERN_ERR "No font found for STI at %08lx\n", address);
goto out_err;
@@ -787,7 +788,7 @@
sti->font_width = sti->font->raw->width;
sti->font_height = sti->font->raw->height;
if (!wordmode)
- sti->font->raw = sti_bmode_font_raw(sti->font);
+ sti->font->raw = sti_bmode_font_raw(sti->font);
sti->sti_mem_request = raw->sti_mem_req;
sti->graphics_id[0] = raw->graphics_id[0];
@@ -811,16 +812,16 @@
u32 sig;
if (num_sti_roms >= MAX_STI_ROMS) {
- printk(KERN_WARNING "maximum number of STI ROMS reached !\n");
- return NULL;
+ printk(KERN_WARNING "maximum number of STI ROMS reached !\n");
+ return NULL;
}
sti = kmalloc(sizeof(*sti), GFP_KERNEL);
if (!sti) {
- printk(KERN_ERR "Not enough memory !\n");
- return NULL;
+ printk(KERN_ERR "Not enough memory !\n");
+ return NULL;
}
-
+
memset(sti, 0, sizeof(*sti));
spin_lock_init(&sti->lock);
@@ -932,28 +933,21 @@
*/
static int __init sticore_pa_init(struct parisc_device *dev)
{
- unsigned long rom = 0;
char pa_path[21];
struct sti_struct *sti = NULL;
-
- if(dev->num_addrs) {
- rom = dev->addr[0];
- }
- if (!rom) {
- rom = dev->hpa;
- DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa));
- sti = sti_try_rom_generic(rom, dev->hpa, NULL);
- rom = PAGE0->proc_sti;
- }
- if (!sti) {
- DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa));
- sti = sti_try_rom_generic(rom, dev->hpa, NULL);
- }
+ int hpa = dev->hpa.start;
+
+ if (dev->num_addrs && dev->addr[0])
+ sti = sti_try_rom_generic(dev->addr[0], hpa, NULL);
+ if (!sti)
+ sti = sti_try_rom_generic(hpa, hpa, NULL);
+ if (!sti)
+ sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL);
if (!sti)
return 1;
-
+
print_pa_hwpath(dev, pa_path);
- sticore_check_for_default_sti (sti, pa_path);
+ sticore_check_for_default_sti(sti, pa_path);
return 0;
}
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 809fee2..56cd199 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -579,6 +579,7 @@
{
int i, j;
+ vga_w(state.vgabase, VGA_PEL_MSK, 0xff);
for (i = j = 0; i < 16; i++) {
vga_w(state.vgabase, VGA_PEL_IW, table[i]);
vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
@@ -721,6 +722,7 @@
{
int i;
+ vga_w(state->vgabase, VGA_PEL_MSK, 0xff);
for (i = 0; i < 16; i++) {
vga_w(state->vgabase, VGA_PEL_IW, i);
vga_w(state->vgabase, VGA_PEL_D, 0);
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index ca02aa2..e2667dd 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1031,7 +1031,7 @@
break;
fb_info->node = i;
- fb_info->class_device = class_device_create(fb_class, MKDEV(FB_MAJOR, i),
+ fb_info->class_device = class_device_create(fb_class, NULL, MKDEV(FB_MAJOR, i),
fb_info->device, "fb%d", i);
if (IS_ERR(fb_info->class_device)) {
/* Not fatal */
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index d3c1922..485604c 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1126,7 +1126,7 @@
gbefb_setup(options);
#endif
- if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
+ if (!request_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
printk(KERN_ERR "gbefb: couldn't reserve mmio region\n");
ret = -EBUSY;
goto out_release_framebuffer;
@@ -1152,12 +1152,24 @@
if (gbe_mem_phys) {
/* memory was allocated at boot time */
gbe_mem = ioremap_nocache(gbe_mem_phys, gbe_mem_size);
+ if (!gbe_mem) {
+ printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
+ ret = -ENOMEM;
+ goto out_tiles_free;
+ }
+
gbe_dma_addr = 0;
} else {
/* try to allocate memory with the classical allocator
* this has high chance to fail on low memory machines */
gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr,
GFP_KERNEL);
+ if (!gbe_mem) {
+ printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n");
+ ret = -ENOMEM;
+ goto out_tiles_free;
+ }
+
gbe_mem_phys = (unsigned long) gbe_dma_addr;
}
@@ -1165,12 +1177,6 @@
mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1);
#endif
- if (!gbe_mem) {
- printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
- ret = -ENXIO;
- goto out_tiles_free;
- }
-
/* map framebuffer memory into tiles table */
for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++)
gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i;
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 1d54d3d..0b9301f 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -424,23 +424,21 @@
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int imxfb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int imxfb_suspend(struct device *dev, pm_message_t state)
{
struct imxfb_info *fbi = dev_get_drvdata(dev);
pr_debug("%s\n",__FUNCTION__);
- if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
- imxfb_disable_controller(fbi);
+ imxfb_disable_controller(fbi);
return 0;
}
-static int imxfb_resume(struct device *dev, u32 level)
+static int imxfb_resume(struct device *dev)
{
struct imxfb_info *fbi = dev_get_drvdata(dev);
pr_debug("%s\n",__FUNCTION__);
- if (level == RESUME_ENABLE)
- imxfb_enable_controller(fbi);
+ imxfb_enable_controller(fbi);
return 0;
}
#else
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 194eed0..6206da9 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -981,21 +981,19 @@
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int pxafb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxafb_suspend(struct device *dev, pm_message_t state)
{
struct pxafb_info *fbi = dev_get_drvdata(dev);
- if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
- set_ctrlr_state(fbi, C_DISABLE_PM);
+ set_ctrlr_state(fbi, C_DISABLE_PM);
return 0;
}
-static int pxafb_resume(struct device *dev, u32 level)
+static int pxafb_resume(struct device *dev)
{
struct pxafb_info *fbi = dev_get_drvdata(dev);
- if (level == RESUME_ENABLE)
- set_ctrlr_state(fbi, C_ENABLE_PM);
+ set_ctrlr_state(fbi, C_ENABLE_PM);
return 0;
}
#else
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index fa98d91..cb2f7a1 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -655,7 +655,7 @@
}
#ifdef CONFIG_PM
-static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state)
{
struct fb_info *info = dev_get_drvdata(dev);
struct s1d13xxxfb_par *s1dfb = info->par;
@@ -702,15 +702,12 @@
return 0;
}
-static int s1d13xxxfb_resume(struct device *dev, u32 level)
+static int s1d13xxxfb_resume(struct device *dev)
{
struct fb_info *info = dev_get_drvdata(dev);
struct s1d13xxxfb_par *s1dfb = info->par;
struct s1d13xxxfb_pdata *pdata = NULL;
- if (level != RESUME_ENABLE)
- return 0;
-
/* awaken the chip */
s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 5ab79af..3862d3c 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -847,37 +847,32 @@
/* suspend and resume support for the lcd controller */
-static int s3c2410fb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s3c2410fb_suspend(struct device *dev, pm_message_t state)
{
struct fb_info *fbinfo = dev_get_drvdata(dev);
struct s3c2410fb_info *info = fbinfo->par;
- if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) {
- s3c2410fb_stop_lcd();
+ s3c2410fb_stop_lcd();
- /* sleep before disabling the clock, we need to ensure
- * the LCD DMA engine is not going to get back on the bus
- * before the clock goes off again (bjd) */
+ /* sleep before disabling the clock, we need to ensure
+ * the LCD DMA engine is not going to get back on the bus
+ * before the clock goes off again (bjd) */
- msleep(1);
- clk_disable(info->clk);
- }
+ msleep(1);
+ clk_disable(info->clk);
return 0;
}
-static int s3c2410fb_resume(struct device *dev, u32 level)
+static int s3c2410fb_resume(struct device *dev)
{
struct fb_info *fbinfo = dev_get_drvdata(dev);
struct s3c2410fb_info *info = fbinfo->par;
- if (level == RESUME_ENABLE) {
- clk_enable(info->clk);
- msleep(1);
+ clk_enable(info->clk);
+ msleep(1);
- s3c2410fb_init_registers(info);
-
- }
+ s3c2410fb_init_registers(info);
return 0;
}
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 8000890..78e5f19 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1309,21 +1309,19 @@
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int sa1100fb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1100fb_suspend(struct device *dev, pm_message_t state)
{
struct sa1100fb_info *fbi = dev_get_drvdata(dev);
- if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
- set_ctrlr_state(fbi, C_DISABLE_PM);
+ set_ctrlr_state(fbi, C_DISABLE_PM);
return 0;
}
-static int sa1100fb_resume(struct device *dev, u32 level)
+static int sa1100fb_resume(struct device *dev)
{
struct sa1100fb_info *fbi = dev_get_drvdata(dev);
- if (level == RESUME_ENABLE)
- set_ctrlr_state(fbi, C_ENABLE_PM);
+ set_ctrlr_state(fbi, C_ENABLE_PM);
return 0;
}
#else
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 0030c07..752bf88 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -438,36 +438,34 @@
}
}
-static int w100fb_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int w100fb_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct fb_info *info = dev_get_drvdata(dev);
- struct w100fb_par *par=info->par;
- struct w100_tg_info *tg = par->mach->tg;
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct w100fb_par *par=info->par;
+ struct w100_tg_info *tg = par->mach->tg;
- w100fb_save_vidmem(par);
- if(tg && tg->suspend)
- tg->suspend(par);
- w100_suspend(W100_SUSPEND_ALL);
- par->blanked = 1;
- }
+ w100fb_save_vidmem(par);
+ if(tg && tg->suspend)
+ tg->suspend(par);
+ w100_suspend(W100_SUSPEND_ALL);
+ par->blanked = 1;
+
return 0;
}
-static int w100fb_resume(struct device *dev, uint32_t level)
+static int w100fb_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct fb_info *info = dev_get_drvdata(dev);
- struct w100fb_par *par=info->par;
- struct w100_tg_info *tg = par->mach->tg;
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct w100fb_par *par=info->par;
+ struct w100_tg_info *tg = par->mach->tg;
- w100_hw_init(par);
- w100fb_activate_var(par);
- w100fb_restore_vidmem(par);
- if(tg && tg->resume)
- tg->resume(par);
- par->blanked = 0;
- }
+ w100_hw_init(par);
+ w100fb_activate_var(par);
+ w100fb_restore_vidmem(par);
+ if(tg && tg->resume)
+ tg->resume(par);
+ par->blanked = 0;
+
return 0;
}
#else
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index 88c517a..9e293e1 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -21,6 +21,7 @@
#include <linux/spinlock.h>
#include <linux/list.h>
+#include <linux/sched.h> /* schedule_timeout() */
#include <linux/delay.h>
#include "w1_family.h"
diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c
index 04ca884..87c29d7 100644
--- a/drivers/zorro/zorro-sysfs.c
+++ b/drivers/zorro/zorro-sysfs.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/zorro.h>
#include <linux/stat.h>
+#include <linux/string.h>
#include "zorro.h"
diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c
index d3c05df..0f2b406 100644
--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -16,6 +16,8 @@
#include <linux/init.h>
#include <linux/zorro.h>
#include <linux/bitops.h>
+#include <linux/string.h>
+
#include <asm/setup.h>
#include <asm/amigahw.h>
diff --git a/fs/Kconfig b/fs/Kconfig
index 48f5422..01a2952 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -810,7 +810,7 @@
config HUGETLBFS
bool "HugeTLB file system support"
- depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || X86_64 || BROKEN
+ depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
config HUGETLB_PAGE
def_bool HUGETLBFS
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 434c19d..175b2e8 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -57,7 +57,7 @@
config BINFMT_AOUT
tristate "Kernel support for a.out and ECOFF binaries"
- depends on (X86 && !X86_64) || ALPHA || ARM || M68K || SPARC32
+ depends on X86_32 || ALPHA || ARM || M68K || SPARC32
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 23c1251..4975c9c 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -29,7 +29,7 @@
static int afs_file_readpage(struct file *file, struct page *page);
static int afs_file_invalidatepage(struct page *page, unsigned long offset);
-static int afs_file_releasepage(struct page *page, int gfp_flags);
+static int afs_file_releasepage(struct page *page, gfp_t gfp_flags);
static ssize_t afs_file_write(struct file *file, const char __user *buf,
size_t size, loff_t *off);
@@ -279,7 +279,7 @@
/*
* release a page and cleanup its private data
*/
-static int afs_file_releasepage(struct page *page, int gfp_flags)
+static int afs_file_releasepage(struct page *page, gfp_t gfp_flags)
{
struct cachefs_page *pageio;
@@ -291,8 +291,8 @@
cachefs_uncache_page(vnode->cache, page);
#endif
- pageio = (struct cachefs_page *) page->private;
- page->private = 0;
+ pageio = (struct cachefs_page *) page_private(page);
+ set_page_private(page, 0);
ClearPagePrivate(page);
if (pageio)
diff --git a/fs/attr.c b/fs/attr.c
index b1796fb..67bcd9b 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -117,9 +117,6 @@
struct timespec now;
unsigned int ia_valid = attr->ia_valid;
- if (!inode)
- BUG();
-
mode = inode->i_mode;
now = current_fs_time(inode->i_sb);
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index dd9baab..7201182 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -318,7 +318,6 @@
current->mm->free_area_cache = current->mm->mmap_base;
current->mm->cached_hole_size = 0;
- set_mm_counter(current->mm, rss, 0);
current->mm->mmap = NULL;
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index d4b1557..6fa6adc 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -773,7 +773,6 @@
/* Do this so that we can load the interpreter, if need be. We will
change some of these later */
- set_mm_counter(current->mm, rss, 0);
current->mm->free_area_cache = current->mm->mmap_base;
current->mm->cached_hole_size = 0;
retval = setup_arg_pages(bprm, randomize_stack_top(STACK_TOP),
@@ -1503,9 +1502,7 @@
fill_psinfo(psinfo, current->group_leader, current->mm);
fill_note(notes +1, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
- fill_note(notes +2, "CORE", NT_TASKSTRUCT, sizeof(*current), current);
-
- numnote = 3;
+ numnote = 2;
auxv = (elf_addr_t *) current->mm->saved_auxv;
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 134c9c0..dda87c4 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -294,14 +294,7 @@
&interp_params,
¤t->mm->start_stack,
¤t->mm->start_brk);
-#endif
- /* do this so that we can load the interpreter, if need be
- * - we will change some of these later
- */
- set_mm_counter(current->mm, rss, 0);
-
-#ifdef CONFIG_MMU
retval = setup_arg_pages(bprm, current->mm->start_stack, executable_stack);
if (retval < 0) {
send_sig(SIGKILL, current, 0);
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 7974efa..9d66258 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -650,7 +650,6 @@
current->mm->start_brk = datapos + data_len + bss_len;
current->mm->brk = (current->mm->start_brk + 3) & ~3;
current->mm->context.end_brk = memp + ksize((void *) memp) - stack_len;
- set_mm_counter(current->mm, rss, 0);
}
if (flags & FLAT_FLAG_KTRACE)
diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c
index 227a268..00a91dc 100644
--- a/fs/binfmt_som.c
+++ b/fs/binfmt_som.c
@@ -259,7 +259,6 @@
create_som_tables(bprm);
current->mm->start_stack = bprm->p;
- set_mm_counter(current->mm, rss, 0);
#if 0
printk("(start_brk) %08lx\n" , (unsigned long) current->mm->start_brk);
diff --git a/fs/bio.c b/fs/bio.c
index 7d81a93..460554b 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -778,7 +778,7 @@
static struct bio *__bio_map_kern(request_queue_t *q, void *data,
- unsigned int len, unsigned int gfp_mask)
+ unsigned int len, gfp_t gfp_mask)
{
unsigned long kaddr = (unsigned long)data;
unsigned long end = (kaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
@@ -825,7 +825,7 @@
* device. Returns an error pointer in case of error.
*/
struct bio *bio_map_kern(request_queue_t *q, void *data, unsigned int len,
- unsigned int gfp_mask)
+ gfp_t gfp_mask)
{
struct bio *bio;
diff --git a/fs/buffer.c b/fs/buffer.c
index 1216c0d..35fa349 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -96,7 +96,7 @@
__clear_page_buffers(struct page *page)
{
ClearPagePrivate(page);
- page->private = 0;
+ set_page_private(page, 0);
page_cache_release(page);
}
@@ -502,7 +502,7 @@
yield();
for_each_pgdat(pgdat) {
- zones = pgdat->node_zonelists[GFP_NOFS&GFP_ZONEMASK].zones;
+ zones = pgdat->node_zonelists[gfp_zone(GFP_NOFS)].zones;
if (*zones)
try_to_free_pages(zones, GFP_NOFS);
}
@@ -1478,8 +1478,10 @@
void __breadahead(struct block_device *bdev, sector_t block, int size)
{
struct buffer_head *bh = __getblk(bdev, block, size);
- ll_rw_block(READA, 1, &bh);
- brelse(bh);
+ if (likely(bh)) {
+ ll_rw_block(READA, 1, &bh);
+ brelse(bh);
+ }
}
EXPORT_SYMBOL(__breadahead);
@@ -1497,7 +1499,7 @@
{
struct buffer_head *bh = __getblk(bdev, block, size);
- if (!buffer_uptodate(bh))
+ if (likely(bh) && !buffer_uptodate(bh))
bh = __bread_slow(bh);
return bh;
}
@@ -1571,7 +1573,7 @@
*
* NOTE: @gfp_mask may go away, and this function may become non-blocking.
*/
-int try_to_release_page(struct page *page, int gfp_mask)
+int try_to_release_page(struct page *page, gfp_t gfp_mask)
{
struct address_space * const mapping = page->mapping;
@@ -1637,6 +1639,15 @@
}
EXPORT_SYMBOL(block_invalidatepage);
+int do_invalidatepage(struct page *page, unsigned long offset)
+{
+ int (*invalidatepage)(struct page *, unsigned long);
+ invalidatepage = page->mapping->a_ops->invalidatepage;
+ if (invalidatepage == NULL)
+ invalidatepage = block_invalidatepage;
+ return (*invalidatepage)(page, offset);
+}
+
/*
* We attach and possibly dirty the buffers atomically wrt
* __set_page_dirty_buffers() via private_lock. try_to_free_buffers
@@ -2696,7 +2707,7 @@
* they may have been added in ext3_writepage(). Make them
* freeable here, so the page does not leak.
*/
- block_invalidatepage(page, 0);
+ do_invalidatepage(page, 0);
unlock_page(page);
return 0; /* don't care */
}
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index 3d1cce3..6a3df88 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -370,8 +370,8 @@
}
devfs_mk_dir ("coda");
for (i = 0; i < MAX_CODADEVS; i++) {
- class_device_create(coda_psdev_class, MKDEV(CODA_PSDEV_MAJOR,i),
- NULL, "cfs%d", i);
+ class_device_create(coda_psdev_class, NULL,
+ MKDEV(CODA_PSDEV_MAJOR,i), NULL, "cfs%d", i);
err = devfs_mk_cdev(MKDEV(CODA_PSDEV_MAJOR, i),
S_IFCHR|S_IRUSR|S_IWUSR, "coda/%d", i);
if (err)
diff --git a/fs/compat.c b/fs/compat.c
index a719e15..8e71cdb 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1490,7 +1490,6 @@
/* execve success */
security_bprm_free(bprm);
acct_update_integrals(current);
- update_mem_hiwater(current);
kfree(bprm);
return retval;
}
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index e28a742..43dbcb0 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -3046,10 +3046,15 @@
/* Serial */
HANDLE_IOCTL(TIOCGSERIAL, serial_struct_ioctl)
HANDLE_IOCTL(TIOCSSERIAL, serial_struct_ioctl)
+#ifdef TIOCGLTC
+COMPATIBLE_IOCTL(TIOCGLTC)
+COMPATIBLE_IOCTL(TIOCSLTC)
+#endif
/* Usbdevfs */
HANDLE_IOCTL(USBDEVFS_CONTROL32, do_usbdevfs_control)
HANDLE_IOCTL(USBDEVFS_BULK32, do_usbdevfs_bulk)
HANDLE_IOCTL(USBDEVFS_DISCSIGNAL32, do_usbdevfs_discsignal)
+COMPATIBLE_IOCTL(USBDEVFS_IOCTL32)
/* i2c */
HANDLE_IOCTL(I2C_FUNCS, w_long)
HANDLE_IOCTL(I2C_RDWR, do_i2c_rdwr_ioctl)
diff --git a/fs/dcache.c b/fs/dcache.c
index fb10386..e90512e 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -689,7 +689,7 @@
*
* In this case we return -1 to tell the caller that we baled.
*/
-static int shrink_dcache_memory(int nr, unsigned int gfp_mask)
+static int shrink_dcache_memory(int nr, gfp_t gfp_mask)
{
if (nr) {
if (!(gfp_mask & __GFP_FS))
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 0d06097..3931e7f 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -162,6 +162,7 @@
up_read(¤t->mm->mmap_sem);
if (ret < 0 && dio->blocks_available && (dio->rw == WRITE)) {
+ struct page *page = ZERO_PAGE(dio->curr_user_address);
/*
* A memory fault, but the filesystem has some outstanding
* mapped blocks. We need to use those blocks up to avoid
@@ -169,7 +170,8 @@
*/
if (dio->page_errors == 0)
dio->page_errors = ret;
- dio->pages[0] = ZERO_PAGE(dio->curr_user_address);
+ page_cache_get(page);
+ dio->pages[0] = page;
dio->head = 0;
dio->tail = 1;
ret = 0;
diff --git a/fs/dquot.c b/fs/dquot.c
index b973233..ea76442 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -500,7 +500,7 @@
* more memory
*/
-static int shrink_dqcache_memory(int nr, unsigned int gfp_mask)
+static int shrink_dqcache_memory(int nr, gfp_t gfp_mask)
{
if (nr) {
spin_lock(&dq_list_lock);
@@ -662,7 +662,7 @@
restart:
file_list_lock();
list_for_each(p, &sb->s_files) {
- struct file *filp = list_entry(p, struct file, f_list);
+ struct file *filp = list_entry(p, struct file, f_u.fu_list);
struct inode *inode = filp->f_dentry->d_inode;
if (filp->f_mode & FMODE_WRITE && dqinit_needed(inode, type)) {
struct dentry *dentry = dget(filp->f_dentry);
diff --git a/fs/exec.c b/fs/exec.c
index a04a575..10d493f 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -126,8 +126,7 @@
struct nameidata nd;
int error;
- nd.intent.open.flags = FMODE_READ;
- error = __user_walk(library, LOOKUP_FOLLOW|LOOKUP_OPEN, &nd);
+ error = __user_path_lookup_open(library, LOOKUP_FOLLOW, &nd, FMODE_READ);
if (error)
goto out;
@@ -139,7 +138,7 @@
if (error)
goto exit;
- file = dentry_open(nd.dentry, nd.mnt, O_RDONLY);
+ file = nameidata_to_filp(&nd, O_RDONLY);
error = PTR_ERR(file);
if (IS_ERR(file))
goto out;
@@ -167,6 +166,7 @@
out:
return error;
exit:
+ release_open_intent(&nd);
path_release(&nd);
goto out;
}
@@ -309,40 +309,36 @@
pud_t * pud;
pmd_t * pmd;
pte_t * pte;
+ spinlock_t *ptl;
if (unlikely(anon_vma_prepare(vma)))
- goto out_sig;
+ goto out;
flush_dcache_page(page);
pgd = pgd_offset(mm, address);
-
- spin_lock(&mm->page_table_lock);
pud = pud_alloc(mm, pgd, address);
if (!pud)
goto out;
pmd = pmd_alloc(mm, pud, address);
if (!pmd)
goto out;
- pte = pte_alloc_map(mm, pmd, address);
+ pte = pte_alloc_map_lock(mm, pmd, address, &ptl);
if (!pte)
goto out;
if (!pte_none(*pte)) {
- pte_unmap(pte);
+ pte_unmap_unlock(pte, ptl);
goto out;
}
- inc_mm_counter(mm, rss);
+ inc_mm_counter(mm, anon_rss);
lru_cache_add_active(page);
set_pte_at(mm, address, pte, pte_mkdirty(pte_mkwrite(mk_pte(
page, vma->vm_page_prot))));
page_add_anon_rmap(page, vma, address);
- pte_unmap(pte);
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(pte, ptl);
/* no need for flush_tlb */
return;
out:
- spin_unlock(&mm->page_table_lock);
-out_sig:
__free_page(page);
force_sig(SIGKILL, current);
}
@@ -490,8 +486,7 @@
int err;
struct file *file;
- nd.intent.open.flags = FMODE_READ;
- err = path_lookup(name, LOOKUP_FOLLOW|LOOKUP_OPEN, &nd);
+ err = path_lookup_open(name, LOOKUP_FOLLOW, &nd, FMODE_READ);
file = ERR_PTR(err);
if (!err) {
@@ -504,7 +499,7 @@
err = -EACCES;
file = ERR_PTR(err);
if (!err) {
- file = dentry_open(nd.dentry, nd.mnt, O_RDONLY);
+ file = nameidata_to_filp(&nd, O_RDONLY);
if (!IS_ERR(file)) {
err = deny_write_access(file);
if (err) {
@@ -516,6 +511,7 @@
return file;
}
}
+ release_open_intent(&nd);
path_release(&nd);
}
goto out;
@@ -634,10 +630,9 @@
/*
* Account for the thread group leader hanging around:
*/
- count = 2;
- if (thread_group_leader(current))
- count = 1;
- else {
+ count = 1;
+ if (!thread_group_leader(current)) {
+ count = 2;
/*
* The SIGALRM timer survives the exec, but needs to point
* at us as the new group leader now. We have a race with
@@ -646,8 +641,10 @@
* before we can safely let the old group leader die.
*/
sig->real_timer.data = (unsigned long)current;
+ spin_unlock_irq(lock);
if (del_timer_sync(&sig->real_timer))
add_timer(&sig->real_timer);
+ spin_lock_irq(lock);
}
while (atomic_read(&sig->count) > count) {
sig->group_exit_task = current;
@@ -659,7 +656,6 @@
}
sig->group_exit_task = NULL;
sig->notify_count = 0;
- sig->real_timer.data = (unsigned long)current;
spin_unlock_irq(lock);
/*
@@ -1207,7 +1203,6 @@
/* execve success */
security_bprm_free(bprm);
acct_update_integrals(current);
- update_mem_hiwater(current);
kfree(bprm);
return retval;
}
@@ -1422,19 +1417,16 @@
static void coredump_wait(struct mm_struct *mm)
{
DECLARE_COMPLETION(startup_done);
+ int core_waiters;
- mm->core_waiters++; /* let other threads block */
mm->core_startup_done = &startup_done;
- /* give other threads a chance to run: */
- yield();
-
zap_threads(mm);
- if (--mm->core_waiters) {
- up_write(&mm->mmap_sem);
+ core_waiters = mm->core_waiters;
+ up_write(&mm->mmap_sem);
+
+ if (core_waiters)
wait_for_completion(&startup_done);
- } else
- up_write(&mm->mmap_sem);
BUG_ON(mm->core_waiters);
}
@@ -1468,11 +1460,21 @@
current->fsuid = 0; /* Dump root private */
}
mm->dumpable = 0;
- init_completion(&mm->core_done);
+
+ retval = -EAGAIN;
spin_lock_irq(¤t->sighand->siglock);
- current->signal->flags = SIGNAL_GROUP_EXIT;
- current->signal->group_exit_code = exit_code;
+ if (!(current->signal->flags & SIGNAL_GROUP_EXIT)) {
+ current->signal->flags = SIGNAL_GROUP_EXIT;
+ current->signal->group_exit_code = exit_code;
+ retval = 0;
+ }
spin_unlock_irq(¤t->sighand->siglock);
+ if (retval) {
+ up_write(&mm->mmap_sem);
+ goto fail;
+ }
+
+ init_completion(&mm->core_done);
coredump_wait(mm);
/*
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index fdba4d1..e7d3f05 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -440,6 +440,10 @@
* the pointer to new one, then send parent to disk.
*/
bh = sb_getblk(inode->i_sb, parent);
+ if (!bh) {
+ err = -EIO;
+ break;
+ }
lock_buffer(bh);
memset(bh->b_data, 0, blocksize);
branch[n].bh = bh;
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 0213db4..7992d21 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -20,6 +20,8 @@
#include <linux/quotaops.h>
#include <linux/buffer_head.h>
+#include "bitmap.h"
+
/*
* balloc.c contains the blocks allocation and deallocation routines
*/
@@ -1010,7 +1012,7 @@
* allocation within the reservation window.
*
* This will avoid keeping on searching the reservation list again and
- * again when someboday is looking for a free block (without
+ * again when somebody is looking for a free block (without
* reservation), and there are lots of free blocks, but they are all
* being reserved.
*
@@ -1416,12 +1418,12 @@
unsigned long bitmap_count, x;
struct buffer_head *bitmap_bh = NULL;
- lock_super(sb);
es = EXT3_SB(sb)->s_es;
desc_count = 0;
bitmap_count = 0;
gdp = NULL;
+ smp_rmb();
for (i = 0; i < ngroups; i++) {
gdp = ext3_get_group_desc(sb, i, NULL);
if (!gdp)
@@ -1440,7 +1442,6 @@
brelse(bitmap_bh);
printk("ext3_count_free_blocks: stored = %u, computed = %lu, %lu\n",
le32_to_cpu(es->s_free_blocks_count), desc_count, bitmap_count);
- unlock_super(sb);
return bitmap_count;
#else
desc_count = 0;
diff --git a/fs/ext3/bitmap.c b/fs/ext3/bitmap.c
index 6c419b9..5b4ba3e 100644
--- a/fs/ext3/bitmap.c
+++ b/fs/ext3/bitmap.c
@@ -8,7 +8,7 @@
*/
#include <linux/buffer_head.h>
-
+#include "bitmap.h"
static int nibblemap[] = {4, 3, 3, 2, 3, 2, 2, 1, 3, 2, 2, 1, 2, 1, 1, 0};
diff --git a/fs/ext3/bitmap.h b/fs/ext3/bitmap.h
new file mode 100644
index 0000000..6ee503a
--- /dev/null
+++ b/fs/ext3/bitmap.h
@@ -0,0 +1,8 @@
+/* linux/fs/ext3/bitmap.c
+ *
+ * Copyright (C) 2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+*/
+
+extern unsigned long ext3_count_free (struct buffer_head *, unsigned int );
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index 6549945..df3f517 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -26,6 +26,7 @@
#include <asm/byteorder.h>
+#include "bitmap.h"
#include "xattr.h"
#include "acl.h"
@@ -704,7 +705,6 @@
unsigned long bitmap_count, x;
struct buffer_head *bitmap_bh = NULL;
- lock_super (sb);
es = EXT3_SB(sb)->s_es;
desc_count = 0;
bitmap_count = 0;
@@ -727,7 +727,6 @@
brelse(bitmap_bh);
printk("ext3_count_free_inodes: stored = %u, computed = %lu, %lu\n",
le32_to_cpu(es->s_free_inodes_count), desc_count, bitmap_count);
- unlock_super(sb);
return desc_count;
#else
desc_count = 0;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index b5177c9..5d9b00e 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -491,7 +491,7 @@
* the same format as ext3_get_branch() would do. We are calling it after
* we had read the existing part of chain and partial points to the last
* triple of that (one with zero ->key). Upon the exit we have the same
- * picture as after the successful ext3_get_block(), excpet that in one
+ * picture as after the successful ext3_get_block(), except that in one
* place chain is disconnected - *branch->p is still zero (we did not
* set the last link), but branch->key contains the number that should
* be placed into *branch->p to fill that gap.
@@ -523,7 +523,6 @@
if (!nr)
break;
branch[n].key = cpu_to_le32(nr);
- keys = n+1;
/*
* Get buffer_head for parent block, zero it out
@@ -531,6 +530,9 @@
* parent to disk.
*/
bh = sb_getblk(inode->i_sb, parent);
+ if (!bh)
+ break;
+ keys = n+1;
branch[n].bh = bh;
lock_buffer(bh);
BUFFER_TRACE(bh, "call get_create_access");
@@ -864,6 +866,10 @@
if (!*errp && buffer_mapped(&dummy)) {
struct buffer_head *bh;
bh = sb_getblk(inode->i_sb, dummy.b_blocknr);
+ if (!bh) {
+ *errp = -EIO;
+ goto err;
+ }
if (buffer_new(&dummy)) {
J_ASSERT(create != 0);
J_ASSERT(handle != 0);
@@ -896,6 +902,7 @@
}
return bh;
}
+err:
return NULL;
}
@@ -1434,7 +1441,7 @@
return journal_invalidatepage(journal, page, offset);
}
-static int ext3_releasepage(struct page *page, int wait)
+static int ext3_releasepage(struct page *page, gfp_t wait)
{
journal_t *journal = EXT3_JOURNAL(page->mapping->host);
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 50378d8..b3c690a 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -36,6 +36,8 @@
#include <linux/quotaops.h>
#include <linux/buffer_head.h>
#include <linux/smp_lock.h>
+
+#include "namei.h"
#include "xattr.h"
#include "acl.h"
diff --git a/fs/ext3/namei.h b/fs/ext3/namei.h
new file mode 100644
index 0000000..f2ce2b0
--- /dev/null
+++ b/fs/ext3/namei.h
@@ -0,0 +1,8 @@
+/* linux/fs/ext3/namei.h
+ *
+ * Copyright (C) 2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+*/
+
+extern struct dentry *ext3_get_parent(struct dentry *child);
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 57f7910..1be78b4b 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -118,6 +118,8 @@
int err;
bh = sb_getblk(sb, blk);
+ if (!bh)
+ return ERR_PTR(-EIO);
if ((err = ext3_journal_get_write_access(handle, bh))) {
brelse(bh);
bh = ERR_PTR(err);
@@ -202,6 +204,10 @@
ext3_debug("update backup group %#04lx (+%d)\n", block, bit);
gdb = sb_getblk(sb, block);
+ if (!gdb) {
+ err = -EIO;
+ goto exit_bh;
+ }
if ((err = ext3_journal_get_write_access(handle, gdb))) {
brelse(gdb);
goto exit_bh;
@@ -643,6 +649,10 @@
break;
bh = sb_getblk(sb, group * bpg + blk_off);
+ if (!bh) {
+ err = -EIO;
+ break;
+ }
ext3_debug("update metadata backup %#04lx\n",
(unsigned long)bh->b_blocknr);
if ((err = ext3_journal_get_write_access(handle, bh)))
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 9e24ceb..f594989 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -36,9 +36,12 @@
#include <linux/namei.h>
#include <linux/quotaops.h>
#include <linux/seq_file.h>
+
#include <asm/uaccess.h>
+
#include "xattr.h"
#include "acl.h"
+#include "namei.h"
static int ext3_load_journal(struct super_block *, struct ext3_super_block *);
static int ext3_create_journal(struct super_block *, struct ext3_super_block *,
@@ -510,19 +513,11 @@
kfree(rsv);
}
-static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
+static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb)
{
- struct super_block *sb = vfs->mnt_sb;
+#if defined(CONFIG_QUOTA)
struct ext3_sb_info *sbi = EXT3_SB(sb);
- if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
- seq_puts(seq, ",data=journal");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
- seq_puts(seq, ",data=ordered");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
- seq_puts(seq, ",data=writeback");
-
-#if defined(CONFIG_QUOTA)
if (sbi->s_jquota_fmt)
seq_printf(seq, ",jqfmt=%s",
(sbi->s_jquota_fmt == QFMT_VFS_OLD) ? "vfsold": "vfsv0");
@@ -539,6 +534,20 @@
if (sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA)
seq_puts(seq, ",grpquota");
#endif
+}
+
+static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ struct super_block *sb = vfs->mnt_sb;
+
+ if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
+ seq_puts(seq, ",data=journal");
+ else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
+ seq_puts(seq, ",data=ordered");
+ else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
+ seq_puts(seq, ",data=writeback");
+
+ ext3_show_quota_options(seq, sb);
return 0;
}
@@ -609,7 +618,6 @@
#endif
};
-struct dentry *ext3_get_parent(struct dentry *child);
static struct export_operations ext3_export_ops = {
.get_parent = ext3_get_parent,
};
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index 269c7b9..430de9f 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -210,7 +210,7 @@
return cmp ? -ENODATA : 0;
}
-int
+static int
ext3_xattr_block_get(struct inode *inode, int name_index, const char *name,
void *buffer, size_t buffer_size)
{
@@ -354,7 +354,7 @@
return buffer_size - rest;
}
-int
+static int
ext3_xattr_block_list(struct inode *inode, char *buffer, size_t buffer_size)
{
struct buffer_head *bh = NULL;
@@ -626,7 +626,7 @@
struct buffer_head *bh;
};
-int
+static int
ext3_xattr_block_find(struct inode *inode, struct ext3_xattr_info *i,
struct ext3_xattr_block_find *bs)
{
@@ -859,7 +859,7 @@
struct ext3_iloc iloc;
};
-int
+static int
ext3_xattr_ibody_find(struct inode *inode, struct ext3_xattr_info *i,
struct ext3_xattr_ibody_find *is)
{
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 895049b..ba82496 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -222,6 +222,80 @@
return len;
}
+enum { PARSE_INVALID = 1, PARSE_NOT_LONGNAME, PARSE_EOF, };
+
+/**
+ * fat_parse_long - Parse extended directory entry.
+ *
+ * This function returns zero on success, negative value on error, or one of
+ * the following:
+ *
+ * %PARSE_INVALID - Directory entry is invalid.
+ * %PARSE_NOT_LONGNAME - Directory entry does not contain longname.
+ * %PARSE_EOF - Directory has no more entries.
+ */
+static int fat_parse_long(struct inode *dir, loff_t *pos,
+ struct buffer_head **bh, struct msdos_dir_entry **de,
+ wchar_t **unicode, unsigned char *nr_slots)
+{
+ struct msdos_dir_slot *ds;
+ unsigned char id, slot, slots, alias_checksum;
+
+ if (!*unicode) {
+ *unicode = (wchar_t *)__get_free_page(GFP_KERNEL);
+ if (!*unicode) {
+ brelse(*bh);
+ return -ENOMEM;
+ }
+ }
+parse_long:
+ slots = 0;
+ ds = (struct msdos_dir_slot *)*de;
+ id = ds->id;
+ if (!(id & 0x40))
+ return PARSE_INVALID;
+ slots = id & ~0x40;
+ if (slots > 20 || !slots) /* ceil(256 * 2 / 26) */
+ return PARSE_INVALID;
+ *nr_slots = slots;
+ alias_checksum = ds->alias_checksum;
+
+ slot = slots;
+ while (1) {
+ int offset;
+
+ slot--;
+ offset = slot * 13;
+ fat16_towchar(*unicode + offset, ds->name0_4, 5);
+ fat16_towchar(*unicode + offset + 5, ds->name5_10, 6);
+ fat16_towchar(*unicode + offset + 11, ds->name11_12, 2);
+
+ if (ds->id & 0x40)
+ (*unicode)[offset + 13] = 0;
+ if (fat_get_entry(dir, pos, bh, de) < 0)
+ return PARSE_EOF;
+ if (slot == 0)
+ break;
+ ds = (struct msdos_dir_slot *)*de;
+ if (ds->attr != ATTR_EXT)
+ return PARSE_NOT_LONGNAME;
+ if ((ds->id & ~0x40) != slot)
+ goto parse_long;
+ if (ds->alias_checksum != alias_checksum)
+ goto parse_long;
+ }
+ if ((*de)->name[0] == DELETED_FLAG)
+ return PARSE_INVALID;
+ if ((*de)->attr == ATTR_EXT)
+ goto parse_long;
+ if (IS_FREE((*de)->name) || ((*de)->attr & ATTR_VOLUME))
+ return PARSE_INVALID;
+ if (fat_checksum((*de)->name) != alias_checksum)
+ *nr_slots = 0;
+
+ return 0;
+}
+
/*
* Return values: negative -> error, 0 -> not found, positive -> found,
* value is the total amount of slots, including the shortname entry.
@@ -259,68 +333,16 @@
if (de->attr != ATTR_EXT && IS_FREE(de->name))
continue;
if (de->attr == ATTR_EXT) {
- struct msdos_dir_slot *ds;
- unsigned char id;
- unsigned char slot;
- unsigned char slots;
- unsigned char sum;
- unsigned char alias_checksum;
-
- if (!unicode) {
- unicode = (wchar_t *)
- __get_free_page(GFP_KERNEL);
- if (!unicode) {
- brelse(bh);
- return -ENOMEM;
- }
- }
-parse_long:
- slots = 0;
- ds = (struct msdos_dir_slot *) de;
- id = ds->id;
- if (!(id & 0x40))
+ int status = fat_parse_long(inode, &cpos, &bh, &de,
+ &unicode, &nr_slots);
+ if (status < 0)
+ return status;
+ else if (status == PARSE_INVALID)
continue;
- slots = id & ~0x40;
- if (slots > 20 || !slots) /* ceil(256 * 2 / 26) */
- continue;
- nr_slots = slots;
- alias_checksum = ds->alias_checksum;
-
- slot = slots;
- while (1) {
- int offset;
-
- slot--;
- offset = slot * 13;
- fat16_towchar(unicode + offset, ds->name0_4, 5);
- fat16_towchar(unicode + offset + 5, ds->name5_10, 6);
- fat16_towchar(unicode + offset + 11, ds->name11_12, 2);
-
- if (ds->id & 0x40) {
- unicode[offset + 13] = 0;
- }
- if (fat_get_entry(inode, &cpos, &bh, &de) < 0)
- goto EODir;
- if (slot == 0)
- break;
- ds = (struct msdos_dir_slot *) de;
- if (ds->attr != ATTR_EXT)
- goto parse_record;
- if ((ds->id & ~0x40) != slot)
- goto parse_long;
- if (ds->alias_checksum != alias_checksum)
- goto parse_long;
- }
- if (de->name[0] == DELETED_FLAG)
- continue;
- if (de->attr == ATTR_EXT)
- goto parse_long;
- if (IS_FREE(de->name) || (de->attr & ATTR_VOLUME))
- continue;
- for (sum = 0, i = 0; i < 11; i++)
- sum = (((sum&1)<<7)|((sum&0xfe)>>1)) + de->name[i];
- if (sum != alias_checksum)
- nr_slots = 0;
+ else if (status == PARSE_NOT_LONGNAME)
+ goto parse_record;
+ else if (status == PARSE_EOF)
+ goto EODir;
}
memcpy(work, de->name, sizeof(de->name));
@@ -408,8 +430,8 @@
int short_len;
};
-static int fat_readdirx(struct inode *inode, struct file *filp, void *dirent,
- filldir_t filldir, int short_only, int both)
+static int __fat_readdir(struct inode *inode, struct file *filp, void *dirent,
+ filldir_t filldir, int short_only, int both)
{
struct super_block *sb = inode->i_sb;
struct msdos_sb_info *sbi = MSDOS_SB(sb);
@@ -458,9 +480,10 @@
bh = NULL;
GetNew:
- long_slots = 0;
if (fat_get_entry(inode, &cpos, &bh, &de) == -1)
goto EODir;
+parse_record:
+ long_slots = 0;
/* Check for long filename entry */
if (isvfat) {
if (de->name[0] == DELETED_FLAG)
@@ -475,69 +498,18 @@
}
if (isvfat && de->attr == ATTR_EXT) {
- struct msdos_dir_slot *ds;
- unsigned char id;
- unsigned char slot;
- unsigned char slots;
- unsigned char sum;
- unsigned char alias_checksum;
-
- if (!unicode) {
- unicode = (wchar_t *)__get_free_page(GFP_KERNEL);
- if (!unicode) {
- filp->f_pos = cpos;
- brelse(bh);
- ret = -ENOMEM;
- goto out;
- }
- }
-ParseLong:
- slots = 0;
- ds = (struct msdos_dir_slot *) de;
- id = ds->id;
- if (!(id & 0x40))
+ int status = fat_parse_long(inode, &cpos, &bh, &de,
+ &unicode, &long_slots);
+ if (status < 0) {
+ filp->f_pos = cpos;
+ ret = status;
+ goto out;
+ } else if (status == PARSE_INVALID)
goto RecEnd;
- slots = id & ~0x40;
- if (slots > 20 || !slots) /* ceil(256 * 2 / 26) */
- goto RecEnd;
- long_slots = slots;
- alias_checksum = ds->alias_checksum;
-
- slot = slots;
- while (1) {
- int offset;
-
- slot--;
- offset = slot * 13;
- fat16_towchar(unicode + offset, ds->name0_4, 5);
- fat16_towchar(unicode + offset + 5, ds->name5_10, 6);
- fat16_towchar(unicode + offset + 11, ds->name11_12, 2);
-
- if (ds->id & 0x40) {
- unicode[offset + 13] = 0;
- }
- if (fat_get_entry(inode, &cpos, &bh, &de) == -1)
- goto EODir;
- if (slot == 0)
- break;
- ds = (struct msdos_dir_slot *) de;
- if (ds->attr != ATTR_EXT)
- goto RecEnd; /* XXX */
- if ((ds->id & ~0x40) != slot)
- goto ParseLong;
- if (ds->alias_checksum != alias_checksum)
- goto ParseLong;
- }
- if (de->name[0] == DELETED_FLAG)
- goto RecEnd;
- if (de->attr == ATTR_EXT)
- goto ParseLong;
- if (IS_FREE(de->name) || (de->attr & ATTR_VOLUME))
- goto RecEnd;
- for (sum = 0, i = 0; i < 11; i++)
- sum = (((sum&1)<<7)|((sum&0xfe)>>1)) + de->name[i];
- if (sum != alias_checksum)
- long_slots = 0;
+ else if (status == PARSE_NOT_LONGNAME)
+ goto parse_record;
+ else if (status == PARSE_EOF)
+ goto EODir;
}
if (sbi->options.dotsOK) {
@@ -671,7 +643,7 @@
static int fat_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
struct inode *inode = filp->f_dentry->d_inode;
- return fat_readdirx(inode, filp, dirent, filldir, 0, 0);
+ return __fat_readdir(inode, filp, dirent, filldir, 0, 0);
}
static int fat_ioctl_filldir(void *__buf, const char *name, int name_len,
@@ -760,8 +732,8 @@
down(&inode->i_sem);
ret = -ENOENT;
if (!IS_DEADDIR(inode)) {
- ret = fat_readdirx(inode, filp, &buf, fat_ioctl_filldir,
- short_only, both);
+ ret = __fat_readdir(inode, filp, &buf, fat_ioctl_filldir,
+ short_only, both);
}
up(&inode->i_sem);
if (ret >= 0)
diff --git a/fs/file_table.c b/fs/file_table.c
index 86ec8ae..4dc2055 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -56,13 +56,13 @@
static inline void file_free_rcu(struct rcu_head *head)
{
- struct file *f = container_of(head, struct file, f_rcuhead);
+ struct file *f = container_of(head, struct file, f_u.fu_rcuhead);
kmem_cache_free(filp_cachep, f);
}
static inline void file_free(struct file *f)
{
- call_rcu(&f->f_rcuhead, file_free_rcu);
+ call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
}
/* Find an unused file structure and return a pointer to it.
@@ -95,7 +95,7 @@
f->f_gid = current->fsgid;
rwlock_init(&f->f_owner.lock);
/* f->f_version: 0 */
- INIT_LIST_HEAD(&f->f_list);
+ INIT_LIST_HEAD(&f->f_u.fu_list);
return f;
over:
@@ -225,15 +225,15 @@
if (!list)
return;
file_list_lock();
- list_move(&file->f_list, list);
+ list_move(&file->f_u.fu_list, list);
file_list_unlock();
}
void file_kill(struct file *file)
{
- if (!list_empty(&file->f_list)) {
+ if (!list_empty(&file->f_u.fu_list)) {
file_list_lock();
- list_del_init(&file->f_list);
+ list_del_init(&file->f_u.fu_list);
file_list_unlock();
}
}
@@ -245,7 +245,7 @@
/* Check that no files are currently opened for writing. */
file_list_lock();
list_for_each(p, &sb->s_files) {
- struct file *file = list_entry(p, struct file, f_list);
+ struct file *file = list_entry(p, struct file, f_u.fu_list);
struct inode *inode = file->f_dentry->d_inode;
/* File with pending delete? */
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 44082bf..9f10728 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -12,6 +12,7 @@
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/sched.h> /* for 'current' */
#include <asm/uaccess.h>
/*
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index e94ab39..ffab478 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -230,7 +230,6 @@
* The inode is clean, unused
*/
list_move(&inode->i_list, &inode_unused);
- inodes_stat.nr_unused++;
}
}
wake_up_inode(inode);
@@ -238,14 +237,20 @@
}
/*
- * Write out an inode's dirty pages. Called under inode_lock.
+ * Write out an inode's dirty pages. Called under inode_lock. Either the
+ * caller has ref on the inode (either via __iget or via syscall against an fd)
+ * or the inode has I_WILL_FREE set (via generic_forget_inode)
*/
static int
-__writeback_single_inode(struct inode *inode,
- struct writeback_control *wbc)
+__writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
{
wait_queue_head_t *wqh;
+ if (!atomic_read(&inode->i_count))
+ WARN_ON(!(inode->i_state & I_WILL_FREE));
+ else
+ WARN_ON(inode->i_state & I_WILL_FREE);
+
if ((wbc->sync_mode != WB_SYNC_ALL) && (inode->i_state & I_LOCK)) {
list_move(&inode->i_list, &inode->i_sb->s_dirty);
return 0;
@@ -259,11 +264,9 @@
wqh = bit_waitqueue(&inode->i_state, __I_LOCK);
do {
- __iget(inode);
spin_unlock(&inode_lock);
__wait_on_bit(wqh, &wq, inode_wait,
TASK_UNINTERRUPTIBLE);
- iput(inode);
spin_lock(&inode_lock);
} while (inode->i_state & I_LOCK);
}
@@ -541,14 +544,15 @@
}
/**
- * write_inode_now - write an inode to disk
- * @inode: inode to write to disk
- * @sync: whether the write should be synchronous or not
+ * write_inode_now - write an inode to disk
+ * @inode: inode to write to disk
+ * @sync: whether the write should be synchronous or not
*
- * This function commits an inode to disk immediately if it is
- * dirty. This is primarily needed by knfsd.
+ * This function commits an inode to disk immediately if it is dirty. This is
+ * primarily needed by knfsd.
+ *
+ * The caller must either have a ref on the inode or must have set I_WILL_FREE.
*/
-
int write_inode_now(struct inode *inode, int sync)
{
int ret;
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index d4c869c..a6f90a6 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -151,9 +151,9 @@
/*
* This function is called when a request is finished. Either a reply
* has arrived or it was interrupted (and not yet sent) or some error
- * occured during communication with userspace, or the device file was
- * closed. It decreases the referece count for the request. In case
- * of a background request the referece to the stored objects are
+ * occurred during communication with userspace, or the device file was
+ * closed. It decreases the reference count for the request. In case
+ * of a background request the reference to the stored objects are
* released. The requester thread is woken up (if still waiting), and
* finally the request is either freed or put on the unused_list
*
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 29f1e9f..70dba72 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -741,13 +741,14 @@
if (inode && S_ISDIR(inode->i_mode)) {
/* Don't allow creating an alias to a directory */
struct dentry *alias = d_find_alias(inode);
- if (alias && !(alias->d_flags & DCACHE_DISCONNECTED)) {
+ if (alias) {
dput(alias);
iput(inode);
return ERR_PTR(-EIO);
}
}
- return d_splice_alias(inode, entry);
+ d_add(entry, inode);
+ return NULL;
}
static int fuse_setxattr(struct dentry *entry, const char *name,
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 24d7615..5cb456f5 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -349,22 +349,22 @@
int isdir);
/**
- * Initialise file operations on a regular file
+ * Initialize file operations on a regular file
*/
void fuse_init_file_inode(struct inode *inode);
/**
- * Initialise inode operations on regular files and special files
+ * Initialize inode operations on regular files and special files
*/
void fuse_init_common(struct inode *inode);
/**
- * Initialise inode and file operations on a directory
+ * Initialize inode and file operations on a directory
*/
void fuse_init_dir(struct inode *inode);
/**
- * Initialise inode operations on a symlink
+ * Initialize inode operations on a symlink
*/
void fuse_init_symlink(struct inode *inode);
@@ -411,7 +411,7 @@
/**
* Decrement reference count of a request. If count goes to zero put
- * on unused list (preallocated) or free reqest (not preallocated).
+ * on unused list (preallocated) or free request (not preallocated).
*/
void fuse_put_request(struct fuse_conn *fc, struct fuse_req *req);
@@ -431,7 +431,7 @@
void request_send_background(struct fuse_conn *fc, struct fuse_req *req);
/**
- * Release inodes and file assiciated with background request
+ * Release inodes and file associated with background request
*/
void fuse_release_background(struct fuse_req *req);
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index f1570b9..3f680c5 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -46,7 +46,7 @@
return generic_block_bmap(mapping, block, hfs_get_block);
}
-static int hfs_releasepage(struct page *page, int mask)
+static int hfs_releasepage(struct page *page, gfp_t mask)
{
struct inode *inode = page->mapping->host;
struct super_block *sb = inode->i_sb;
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index d564270..f205773 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -40,7 +40,7 @@
return generic_block_bmap(mapping, block, hfsplus_get_block);
}
-static int hfsplus_releasepage(struct page *page, int mask)
+static int hfsplus_releasepage(struct page *page, gfp_t mask)
{
struct inode *inode = page->mapping->host;
struct super_block *sb = inode->i_sb;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 3a9b6d1..e026c80 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -45,10 +45,58 @@
int sysctl_hugetlb_shm_group;
+static void huge_pagevec_release(struct pagevec *pvec)
+{
+ int i;
+
+ for (i = 0; i < pagevec_count(pvec); ++i)
+ put_page(pvec->pages[i]);
+
+ pagevec_reinit(pvec);
+}
+
+/*
+ * huge_pages_needed tries to determine the number of new huge pages that
+ * will be required to fully populate this VMA. This will be equal to
+ * the size of the VMA in huge pages minus the number of huge pages
+ * (covered by this VMA) that are found in the page cache.
+ *
+ * Result is in bytes to be compatible with is_hugepage_mem_enough()
+ */
+unsigned long
+huge_pages_needed(struct address_space *mapping, struct vm_area_struct *vma)
+{
+ int i;
+ struct pagevec pvec;
+ unsigned long start = vma->vm_start;
+ unsigned long end = vma->vm_end;
+ unsigned long hugepages = (end - start) >> HPAGE_SHIFT;
+ pgoff_t next = vma->vm_pgoff;
+ pgoff_t endpg = next + ((end - start) >> PAGE_SHIFT);
+
+ pagevec_init(&pvec, 0);
+ while (next < endpg) {
+ if (!pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE))
+ break;
+ for (i = 0; i < pagevec_count(&pvec); i++) {
+ struct page *page = pvec.pages[i];
+ if (page->index > next)
+ next = page->index;
+ if (page->index >= endpg)
+ break;
+ next++;
+ hugepages--;
+ }
+ huge_pagevec_release(&pvec);
+ }
+ return hugepages << HPAGE_SHIFT;
+}
+
static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
struct inode *inode = file->f_dentry->d_inode;
struct address_space *mapping = inode->i_mapping;
+ unsigned long bytes;
loff_t len, vma_len;
int ret;
@@ -67,6 +115,10 @@
if (vma->vm_end - vma->vm_start < HPAGE_SIZE)
return -EINVAL;
+ bytes = huge_pages_needed(mapping, vma);
+ if (!is_hugepage_mem_enough(bytes))
+ return -ENOMEM;
+
vma_len = (loff_t)(vma->vm_end - vma->vm_start);
down(&inode->i_sem);
@@ -79,10 +131,8 @@
if (!(vma->vm_flags & VM_WRITE) && len > inode->i_size)
goto out;
- ret = hugetlb_prefault(mapping, vma);
- if (ret)
- goto out;
-
+ ret = 0;
+ hugetlb_prefault_arch_hook(vma->vm_mm);
if (inode->i_size < len)
inode->i_size = len;
out:
@@ -92,7 +142,7 @@
}
/*
- * Called under down_write(mmap_sem), page_table_lock is not held
+ * Called under down_write(mmap_sem).
*/
#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
@@ -171,16 +221,6 @@
return -EINVAL;
}
-static void huge_pagevec_release(struct pagevec *pvec)
-{
- int i;
-
- for (i = 0; i < pagevec_count(pvec); ++i)
- put_page(pvec->pages[i]);
-
- pagevec_reinit(pvec);
-}
-
static void truncate_huge_page(struct page *page)
{
clear_page_dirty(page);
@@ -224,52 +264,35 @@
static void hugetlbfs_delete_inode(struct inode *inode)
{
- struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(inode->i_sb);
-
- hlist_del_init(&inode->i_hash);
- list_del_init(&inode->i_list);
- list_del_init(&inode->i_sb_list);
- inode->i_state |= I_FREEING;
- inodes_stat.nr_inodes--;
- spin_unlock(&inode_lock);
-
if (inode->i_data.nrpages)
truncate_hugepages(&inode->i_data, 0);
-
- security_inode_delete(inode);
-
- if (sbinfo->free_inodes >= 0) {
- spin_lock(&sbinfo->stat_lock);
- sbinfo->free_inodes++;
- spin_unlock(&sbinfo->stat_lock);
- }
-
clear_inode(inode);
- destroy_inode(inode);
}
static void hugetlbfs_forget_inode(struct inode *inode)
{
- struct super_block *super_block = inode->i_sb;
- struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(super_block);
+ struct super_block *sb = inode->i_sb;
- if (hlist_unhashed(&inode->i_hash))
- goto out_truncate;
-
- if (!(inode->i_state & (I_DIRTY|I_LOCK))) {
- list_del(&inode->i_list);
- list_add(&inode->i_list, &inode_unused);
- }
- inodes_stat.nr_unused++;
- if (!super_block || (super_block->s_flags & MS_ACTIVE)) {
+ if (!hlist_unhashed(&inode->i_hash)) {
+ if (!(inode->i_state & (I_DIRTY|I_LOCK)))
+ list_move(&inode->i_list, &inode_unused);
+ inodes_stat.nr_unused++;
+ if (!sb || (sb->s_flags & MS_ACTIVE)) {
+ spin_unlock(&inode_lock);
+ return;
+ }
+ inode->i_state |= I_WILL_FREE;
spin_unlock(&inode_lock);
- return;
+ /*
+ * write_inode_now is a noop as we set BDI_CAP_NO_WRITEBACK
+ * in our backing_dev_info.
+ */
+ write_inode_now(inode, 1);
+ spin_lock(&inode_lock);
+ inode->i_state &= ~I_WILL_FREE;
+ inodes_stat.nr_unused--;
+ hlist_del_init(&inode->i_hash);
}
-
- /* write_inode_now() ? */
- inodes_stat.nr_unused--;
- hlist_del_init(&inode->i_hash);
-out_truncate:
list_del_init(&inode->i_list);
list_del_init(&inode->i_sb_list);
inode->i_state |= I_FREEING;
@@ -277,13 +300,6 @@
spin_unlock(&inode_lock);
if (inode->i_data.nrpages)
truncate_hugepages(&inode->i_data, 0);
-
- if (sbinfo->free_inodes >= 0) {
- spin_lock(&sbinfo->stat_lock);
- sbinfo->free_inodes++;
- spin_unlock(&sbinfo->stat_lock);
- }
-
clear_inode(inode);
destroy_inode(inode);
}
@@ -291,7 +307,7 @@
static void hugetlbfs_drop_inode(struct inode *inode)
{
if (!inode->i_nlink)
- hugetlbfs_delete_inode(inode);
+ generic_delete_inode(inode);
else
hugetlbfs_forget_inode(inode);
}
@@ -308,7 +324,6 @@
vma_prio_tree_foreach(vma, &iter, root, h_pgoff, ULONG_MAX) {
unsigned long h_vm_pgoff;
- unsigned long v_length;
unsigned long v_offset;
h_vm_pgoff = vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT);
@@ -319,11 +334,8 @@
if (h_vm_pgoff >= h_pgoff)
v_offset = 0;
- v_length = vma->vm_end - vma->vm_start;
-
- zap_hugepage_range(vma,
- vma->vm_start + v_offset,
- v_length - v_offset);
+ unmap_hugepage_range(vma,
+ vma->vm_start + v_offset, vma->vm_end);
}
}
@@ -379,17 +391,6 @@
gid_t gid, int mode, dev_t dev)
{
struct inode *inode;
- struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(sb);
-
- if (sbinfo->free_inodes >= 0) {
- spin_lock(&sbinfo->stat_lock);
- if (!sbinfo->free_inodes) {
- spin_unlock(&sbinfo->stat_lock);
- return NULL;
- }
- sbinfo->free_inodes--;
- spin_unlock(&sbinfo->stat_lock);
- }
inode = new_inode(sb);
if (inode) {
@@ -531,29 +532,51 @@
}
}
+static inline int hugetlbfs_dec_free_inodes(struct hugetlbfs_sb_info *sbinfo)
+{
+ if (sbinfo->free_inodes >= 0) {
+ spin_lock(&sbinfo->stat_lock);
+ if (unlikely(!sbinfo->free_inodes)) {
+ spin_unlock(&sbinfo->stat_lock);
+ return 0;
+ }
+ sbinfo->free_inodes--;
+ spin_unlock(&sbinfo->stat_lock);
+ }
+
+ return 1;
+}
+
+static void hugetlbfs_inc_free_inodes(struct hugetlbfs_sb_info *sbinfo)
+{
+ if (sbinfo->free_inodes >= 0) {
+ spin_lock(&sbinfo->stat_lock);
+ sbinfo->free_inodes++;
+ spin_unlock(&sbinfo->stat_lock);
+ }
+}
+
+
static kmem_cache_t *hugetlbfs_inode_cachep;
static struct inode *hugetlbfs_alloc_inode(struct super_block *sb)
{
+ struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(sb);
struct hugetlbfs_inode_info *p;
- p = kmem_cache_alloc(hugetlbfs_inode_cachep, SLAB_KERNEL);
- if (!p)
+ if (unlikely(!hugetlbfs_dec_free_inodes(sbinfo)))
return NULL;
+ p = kmem_cache_alloc(hugetlbfs_inode_cachep, SLAB_KERNEL);
+ if (unlikely(!p)) {
+ hugetlbfs_inc_free_inodes(sbinfo);
+ return NULL;
+ }
return &p->vfs_inode;
}
-static void init_once(void *foo, kmem_cache_t *cachep, unsigned long flags)
-{
- struct hugetlbfs_inode_info *ei = (struct hugetlbfs_inode_info *)foo;
-
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
- inode_init_once(&ei->vfs_inode);
-}
-
static void hugetlbfs_destroy_inode(struct inode *inode)
{
+ hugetlbfs_inc_free_inodes(HUGETLBFS_SB(inode->i_sb));
mpol_free_shared_policy(&HUGETLBFS_I(inode)->policy);
kmem_cache_free(hugetlbfs_inode_cachep, HUGETLBFS_I(inode));
}
@@ -565,6 +588,16 @@
.set_page_dirty = hugetlbfs_set_page_dirty,
};
+
+static void init_once(void *foo, kmem_cache_t *cachep, unsigned long flags)
+{
+ struct hugetlbfs_inode_info *ei = (struct hugetlbfs_inode_info *)foo;
+
+ if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
+ SLAB_CTOR_CONSTRUCTOR)
+ inode_init_once(&ei->vfs_inode);
+}
+
struct file_operations hugetlbfs_file_operations = {
.mmap = hugetlbfs_file_mmap,
.fsync = simple_sync_file,
@@ -592,6 +625,7 @@
.alloc_inode = hugetlbfs_alloc_inode,
.destroy_inode = hugetlbfs_destroy_inode,
.statfs = hugetlbfs_statfs,
+ .delete_inode = hugetlbfs_delete_inode,
.drop_inode = hugetlbfs_drop_inode,
.put_super = hugetlbfs_put_super,
};
diff --git a/fs/inode.c b/fs/inode.c
index f80a79f..d8d04bd 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -475,7 +475,7 @@
* This function is passed the number of inodes to scan, and it returns the
* total number of remaining possibly-reclaimable inodes.
*/
-static int shrink_icache_memory(int nr, unsigned int gfp_mask)
+static int shrink_icache_memory(int nr, gfp_t gfp_mask)
{
if (nr) {
/*
@@ -1088,6 +1088,7 @@
if (inode->i_data.nrpages)
truncate_inode_pages(&inode->i_data, 0);
clear_inode(inode);
+ wake_up_inode(inode);
destroy_inode(inode);
}
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 7ae2c4f..e4b516a 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -1606,7 +1606,7 @@
* Simple support for retrying memory allocations. Introduced to help to
* debug different VM deadlock avoidance strategies.
*/
-void * __jbd_kmalloc (const char *where, size_t size, int flags, int retry)
+void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry)
{
return kmalloc(size, flags | (retry ? __GFP_NOFAIL : 0));
}
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 49bbc2b..13cb05b 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1621,7 +1621,7 @@
* while the data is part of a transaction. Yes?
*/
int journal_try_to_free_buffers(journal_t *journal,
- struct page *page, int unused_gfp_mask)
+ struct page *page, gfp_t unused_gfp_mask)
{
struct buffer_head *head;
struct buffer_head *bh;
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index 0f22438..8210ac1 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -15,6 +15,7 @@
#include <linux/jffs2.h>
#include <linux/mtd/mtd.h>
#include <linux/completion.h>
+#include <linux/sched.h>
#include "nodelist.h"
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 996d922..316133c 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -18,6 +18,8 @@
#include <linux/mtd/mtd.h>
#include <linux/crc32.h>
#include <linux/mtd/nand.h>
+#include <linux/jiffies.h>
+
#include "nodelist.h"
/* For testing write failures */
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index eadf319..68000a5 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -74,7 +74,7 @@
static void dbAllocBits(struct bmap * bmp, struct dmap * dp, s64 blkno,
int nblocks);
static void dbSplit(dmtree_t * tp, int leafno, int splitsz, int newval);
-static void dbBackSplit(dmtree_t * tp, int leafno);
+static int dbBackSplit(dmtree_t * tp, int leafno);
static int dbJoin(dmtree_t * tp, int leafno, int newval);
static void dbAdjTree(dmtree_t * tp, int leafno, int newval);
static int dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc,
@@ -305,7 +305,6 @@
filemap_fdatawrite(ipbmap->i_mapping);
filemap_fdatawait(ipbmap->i_mapping);
- ipbmap->i_state |= I_DIRTY;
diWriteSpecial(ipbmap, 0);
return (0);
@@ -2467,7 +2466,9 @@
* that it is at the front of a binary buddy system.
*/
if (oldval == NOFREE) {
- dbBackSplit((dmtree_t *) dcp, leafno);
+ rc = dbBackSplit((dmtree_t *) dcp, leafno);
+ if (rc)
+ return rc;
oldval = dcp->stree[ti];
}
dbSplit((dmtree_t *) dcp, leafno, dcp->budmin, newval);
@@ -2627,7 +2628,7 @@
*
* serialization: IREAD_LOCK(ipbmap) or IWRITE_LOCK(ipbmap) held on entry/exit;
*/
-static void dbBackSplit(dmtree_t * tp, int leafno)
+static int dbBackSplit(dmtree_t * tp, int leafno)
{
int budsz, bud, w, bsz, size;
int cursz;
@@ -2662,7 +2663,10 @@
*/
for (w = leafno, bsz = budsz;; bsz <<= 1,
w = (w < bud) ? w : bud) {
- assert(bsz < le32_to_cpu(tp->dmt_nleafs));
+ if (bsz >= le32_to_cpu(tp->dmt_nleafs)) {
+ jfs_err("JFS: block map error in dbBackSplit");
+ return -EIO;
+ }
/* determine the buddy.
*/
@@ -2681,7 +2685,11 @@
}
}
- assert(leaf[leafno] == size);
+ if (leaf[leafno] != size) {
+ jfs_err("JFS: wrong leaf value in dbBackSplit");
+ return -EIO;
+ }
+ return 0;
}
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index 4021d46..28201b1 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -57,6 +57,12 @@
#include "jfs_debug.h"
/*
+ * __mark_inode_dirty expects inodes to be hashed. Since we don't want
+ * special inodes in the fileset inode space, we hash them to a dummy head
+ */
+static HLIST_HEAD(aggregate_hash);
+
+/*
* imap locks
*/
/* iag free list lock */
@@ -491,6 +497,8 @@
/* release the page */
release_metapage(mp);
+ hlist_add_head(&ip->i_hash, &aggregate_hash);
+
return (ip);
}
@@ -514,8 +522,6 @@
ino_t inum = ip->i_ino;
struct metapage *mp;
- ip->i_state &= ~I_DIRTY;
-
if (secondary)
address = addressPXD(&sbi->ait2) >> sbi->l2nbperpage;
else
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index 13d7e3f..8a53981 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -86,7 +86,7 @@
atomic_t io_count;
struct metapage *mp[MPS_PER_PAGE];
};
-#define mp_anchor(page) ((struct meta_anchor *)page->private)
+#define mp_anchor(page) ((struct meta_anchor *)page_private(page))
static inline struct metapage *page_to_mp(struct page *page, uint offset)
{
@@ -108,7 +108,7 @@
if (!a)
return -ENOMEM;
memset(a, 0, sizeof(struct meta_anchor));
- page->private = (unsigned long)a;
+ set_page_private(page, (unsigned long)a);
SetPagePrivate(page);
kmap(page);
}
@@ -136,7 +136,7 @@
a->mp[index] = NULL;
if (--a->mp_count == 0) {
kfree(a);
- page->private = 0;
+ set_page_private(page, 0);
ClearPagePrivate(page);
kunmap(page);
}
@@ -156,13 +156,13 @@
#else
static inline struct metapage *page_to_mp(struct page *page, uint offset)
{
- return PagePrivate(page) ? (struct metapage *)page->private : NULL;
+ return PagePrivate(page) ? (struct metapage *)page_private(page) : NULL;
}
static inline int insert_metapage(struct page *page, struct metapage *mp)
{
if (mp) {
- page->private = (unsigned long)mp;
+ set_page_private(page, (unsigned long)mp);
SetPagePrivate(page);
kmap(page);
}
@@ -171,7 +171,7 @@
static inline void remove_metapage(struct page *page, struct metapage *mp)
{
- page->private = 0;
+ set_page_private(page, 0);
ClearPagePrivate(page);
kunmap(page);
}
@@ -198,7 +198,7 @@
}
}
-static inline struct metapage *alloc_metapage(unsigned int gfp_mask)
+static inline struct metapage *alloc_metapage(gfp_t gfp_mask)
{
return mempool_alloc(metapage_mempool, gfp_mask);
}
@@ -395,6 +395,12 @@
if (mp->nohomeok && !test_bit(META_forcewrite, &mp->flag)) {
redirty = 1;
+ /*
+ * Make sure this page isn't blocked indefinitely.
+ * If the journal isn't undergoing I/O, push it
+ */
+ if (mp->log && !(mp->log->cflag & logGC_PAGEOUT))
+ jfs_flush_journal(mp->log, 0);
continue;
}
@@ -534,7 +540,7 @@
return -EIO;
}
-static int metapage_releasepage(struct page *page, int gfp_mask)
+static int metapage_releasepage(struct page *page, gfp_t gfp_mask)
{
struct metapage *mp;
int busy = 0;
diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c
index 9b71ed2..b660c93 100644
--- a/fs/jfs/jfs_txnmgr.c
+++ b/fs/jfs/jfs_txnmgr.c
@@ -2396,7 +2396,6 @@
*/
if (tblk->xflag & COMMIT_CREATE) {
diUpdatePMap(ipimap, tblk->ino, FALSE, tblk);
- ipimap->i_state |= I_DIRTY;
/* update persistent block allocation map
* for the allocation of inode extent;
*/
@@ -2407,7 +2406,6 @@
} else if (tblk->xflag & COMMIT_DELETE) {
ip = tblk->u.ip;
diUpdatePMap(ipimap, ip->i_ino, TRUE, tblk);
- ipimap->i_state |= I_DIRTY;
iput(ip);
}
}
diff --git a/fs/jfs/jfs_xtree.c b/fs/jfs/jfs_xtree.c
index a7fe2f2..e72f4eb 100644
--- a/fs/jfs/jfs_xtree.c
+++ b/fs/jfs/jfs_xtree.c
@@ -3516,16 +3516,10 @@
/* process entries backward from last index */
index = le16_to_cpu(p->header.nextindex) - 1;
- if (p->header.flag & BT_INTERNAL)
- goto getChild;
- /*
- * leaf page
- */
-
- /* Since this is the rightmost leaf, and we may have already freed
- * a page that was formerly to the right, let's make sure that the
- * next pointer is zero.
+ /* Since this is the rightmost page at this level, and we may have
+ * already freed a page that was formerly to the right, let's make
+ * sure that the next pointer is zero.
*/
if (p->header.next) {
if (log)
@@ -3539,6 +3533,12 @@
p->header.next = 0;
}
+ if (p->header.flag & BT_INTERNAL)
+ goto getChild;
+
+ /*
+ * leaf page
+ */
freed = 0;
/* does region covered by leaf page precede Teof ? */
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 71bc34b..4226af3 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -442,6 +442,7 @@
inode->i_nlink = 1;
inode->i_size = sb->s_bdev->bd_inode->i_size;
inode->i_mapping->a_ops = &jfs_metapage_aops;
+ insert_inode_hash(inode);
mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
sbi->direct_inode = inode;
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index 82c77df..c4c8601 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -173,11 +173,10 @@
/* If we've already created an RPC client, check whether
* RPC rebind is required
- * Note: why keep rebinding if we're on a tcp connection?
*/
if ((clnt = host->h_rpcclnt) != NULL) {
xprt = clnt->cl_xprt;
- if (!xprt->stream && time_after_eq(jiffies, host->h_nextrebind)) {
+ if (time_after_eq(jiffies, host->h_nextrebind)) {
clnt->cl_port = 0;
host->h_nextrebind = jiffies + NLM_HOST_REBIND;
dprintk("lockd: next rebind in %ld jiffies\n",
@@ -189,7 +188,6 @@
goto forgetit;
xprt_set_timeout(&xprt->timeout, 5, nlmsvc_timeout);
- xprt->nocong = 1; /* No congestion control for NLM */
xprt->resvport = 1; /* NLM requires a reserved port */
/* Existing NLM servers accept AUTH_UNIX only */
diff --git a/fs/locks.c b/fs/locks.c
index f7daa5f..a1e8b22 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -316,21 +316,22 @@
/* POSIX-1996 leaves the case l->l_len < 0 undefined;
POSIX-2001 defines it. */
start += l->l_start;
- end = start + l->l_len - 1;
- if (l->l_len < 0) {
- end = start - 1;
- start += l->l_len;
- }
-
if (start < 0)
return -EINVAL;
- if (l->l_len > 0 && end < 0)
- return -EOVERFLOW;
-
+ fl->fl_end = OFFSET_MAX;
+ if (l->l_len > 0) {
+ end = start + l->l_len - 1;
+ fl->fl_end = end;
+ } else if (l->l_len < 0) {
+ end = start - 1;
+ fl->fl_end = end;
+ start += l->l_len;
+ if (start < 0)
+ return -EINVAL;
+ }
fl->fl_start = start; /* we record the absolute position */
- fl->fl_end = end;
- if (l->l_len == 0)
- fl->fl_end = OFFSET_MAX;
+ if (fl->fl_end < fl->fl_start)
+ return -EOVERFLOW;
fl->fl_owner = current->files;
fl->fl_pid = current->tgid;
@@ -362,14 +363,21 @@
return -EINVAL;
}
- if (((start += l->l_start) < 0) || (l->l_len < 0))
+ start += l->l_start;
+ if (start < 0)
return -EINVAL;
- fl->fl_end = start + l->l_len - 1;
- if (l->l_len > 0 && fl->fl_end < 0)
- return -EOVERFLOW;
+ fl->fl_end = OFFSET_MAX;
+ if (l->l_len > 0) {
+ fl->fl_end = start + l->l_len - 1;
+ } else if (l->l_len < 0) {
+ fl->fl_end = start - 1;
+ start += l->l_len;
+ if (start < 0)
+ return -EINVAL;
+ }
fl->fl_start = start; /* we record the absolute position */
- if (l->l_len == 0)
- fl->fl_end = OFFSET_MAX;
+ if (fl->fl_end < fl->fl_start)
+ return -EOVERFLOW;
fl->fl_owner = current->files;
fl->fl_pid = current->tgid;
@@ -829,12 +837,16 @@
/* Detect adjacent or overlapping regions (if same lock type)
*/
if (request->fl_type == fl->fl_type) {
+ /* In all comparisons of start vs end, use
+ * "start - 1" rather than "end + 1". If end
+ * is OFFSET_MAX, end + 1 will become negative.
+ */
if (fl->fl_end < request->fl_start - 1)
goto next_lock;
/* If the next lock in the list has entirely bigger
* addresses than the new one, insert the lock here.
*/
- if (fl->fl_start > request->fl_end + 1)
+ if (fl->fl_start - 1 > request->fl_end)
break;
/* If we come here, the new and old lock are of the
diff --git a/fs/mbcache.c b/fs/mbcache.c
index b002a08..298997f 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -116,7 +116,7 @@
* What the mbcache registers as to get shrunk dynamically.
*/
-static int mb_cache_shrink_fn(int nr_to_scan, unsigned int gfp_mask);
+static int mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask);
static inline int
@@ -140,7 +140,7 @@
static inline void
-__mb_cache_entry_forget(struct mb_cache_entry *ce, int gfp_mask)
+__mb_cache_entry_forget(struct mb_cache_entry *ce, gfp_t gfp_mask)
{
struct mb_cache *cache = ce->e_cache;
@@ -193,7 +193,7 @@
* Returns the number of objects which are present in the cache.
*/
static int
-mb_cache_shrink_fn(int nr_to_scan, unsigned int gfp_mask)
+mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free_list);
struct list_head *l, *ltmp;
diff --git a/fs/msdos/namei.c b/fs/msdos/namei.c
index 154f511..626a367 100644
--- a/fs/msdos/namei.c
+++ b/fs/msdos/namei.c
@@ -454,10 +454,10 @@
{
struct buffer_head *dotdot_bh;
struct msdos_dir_entry *dotdot_de;
- loff_t dotdot_i_pos;
struct inode *old_inode, *new_inode;
struct fat_slot_info old_sinfo, sinfo;
struct timespec ts;
+ loff_t dotdot_i_pos, new_i_pos;
int err, old_attrs, is_dir, update_dotdot, corrupt = 0;
old_sinfo.bh = sinfo.bh = dotdot_bh = NULL;
@@ -516,28 +516,24 @@
if (new_inode) {
if (err)
goto out;
- if (MSDOS_I(new_inode)->i_pos != sinfo.i_pos) {
- /* WTF??? Cry and fail. */
- printk(KERN_WARNING "msdos_rename: fs corrupted\n");
- goto out;
- }
-
if (is_dir) {
err = fat_dir_empty(new_inode);
if (err)
goto out;
}
+ new_i_pos = MSDOS_I(new_inode)->i_pos;
fat_detach(new_inode);
} else {
err = msdos_add_entry(new_dir, new_name, is_dir, is_hid, 0,
&ts, &sinfo);
if (err)
goto out;
+ new_i_pos = sinfo.i_pos;
}
new_dir->i_version++;
fat_detach(old_inode);
- fat_attach(old_inode, sinfo.i_pos);
+ fat_attach(old_inode, new_i_pos);
if (is_hid)
MSDOS_I(old_inode)->i_attrs |= ATTR_HIDDEN;
else
@@ -604,7 +600,7 @@
fat_attach(old_inode, old_sinfo.i_pos);
MSDOS_I(old_inode)->i_attrs = old_attrs;
if (new_inode) {
- fat_attach(new_inode, sinfo.i_pos);
+ fat_attach(new_inode, new_i_pos);
if (corrupt)
corrupt |= fat_sync_inode(new_inode);
} else {
diff --git a/fs/namei.c b/fs/namei.c
index aa62dbd..c5769c4 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -28,6 +28,7 @@
#include <linux/syscalls.h>
#include <linux/mount.h>
#include <linux/audit.h>
+#include <linux/file.h>
#include <asm/namei.h>
#include <asm/uaccess.h>
@@ -317,6 +318,18 @@
mntput_no_expire(nd->mnt);
}
+/**
+ * release_open_intent - free up open intent resources
+ * @nd: pointer to nameidata
+ */
+void release_open_intent(struct nameidata *nd)
+{
+ if (nd->intent.open.file->f_dentry == NULL)
+ put_filp(nd->intent.open.file);
+ else
+ fput(nd->intent.open.file);
+}
+
/*
* Internal lookup() using the new generic dcache.
* SMP-safe
@@ -750,6 +763,7 @@
struct qstr this;
unsigned int c;
+ nd->flags |= LOOKUP_CONTINUE;
err = exec_permission_lite(inode, nd);
if (err == -EAGAIN) {
err = permission(inode, MAY_EXEC, nd);
@@ -802,7 +816,6 @@
if (err < 0)
break;
}
- nd->flags |= LOOKUP_CONTINUE;
/* This does the actual lookups.. */
err = do_lookup(nd, &this, &next);
if (err)
@@ -1052,6 +1065,70 @@
return retval;
}
+static int __path_lookup_intent_open(const char *name, unsigned int lookup_flags,
+ struct nameidata *nd, int open_flags, int create_mode)
+{
+ struct file *filp = get_empty_filp();
+ int err;
+
+ if (filp == NULL)
+ return -ENFILE;
+ nd->intent.open.file = filp;
+ nd->intent.open.flags = open_flags;
+ nd->intent.open.create_mode = create_mode;
+ err = path_lookup(name, lookup_flags|LOOKUP_OPEN, nd);
+ if (IS_ERR(nd->intent.open.file)) {
+ if (err == 0) {
+ err = PTR_ERR(nd->intent.open.file);
+ path_release(nd);
+ }
+ } else if (err != 0)
+ release_open_intent(nd);
+ return err;
+}
+
+/**
+ * path_lookup_open - lookup a file path with open intent
+ * @name: pointer to file name
+ * @lookup_flags: lookup intent flags
+ * @nd: pointer to nameidata
+ * @open_flags: open intent flags
+ */
+int path_lookup_open(const char *name, unsigned int lookup_flags,
+ struct nameidata *nd, int open_flags)
+{
+ return __path_lookup_intent_open(name, lookup_flags, nd,
+ open_flags, 0);
+}
+
+/**
+ * path_lookup_create - lookup a file path with open + create intent
+ * @name: pointer to file name
+ * @lookup_flags: lookup intent flags
+ * @nd: pointer to nameidata
+ * @open_flags: open intent flags
+ * @create_mode: create intent flags
+ */
+int path_lookup_create(const char *name, unsigned int lookup_flags,
+ struct nameidata *nd, int open_flags, int create_mode)
+{
+ return __path_lookup_intent_open(name, lookup_flags|LOOKUP_CREATE, nd,
+ open_flags, create_mode);
+}
+
+int __user_path_lookup_open(const char __user *name, unsigned int lookup_flags,
+ struct nameidata *nd, int open_flags)
+{
+ char *tmp = getname(name);
+ int err = PTR_ERR(tmp);
+
+ if (!IS_ERR(tmp)) {
+ err = __path_lookup_intent_open(tmp, lookup_flags, nd, open_flags, 0);
+ putname(tmp);
+ }
+ return err;
+}
+
/*
* Restricted form of lookup. Doesn't follow links, single-component only,
* needs parent already locked. Doesn't follow mounts.
@@ -1234,9 +1311,6 @@
}
/*
- * Special case: O_CREAT|O_EXCL implies O_NOFOLLOW for security
- * reasons.
- *
* O_DIRECTORY translates into forcing a directory lookup.
*/
static inline int lookup_flags(unsigned int f)
@@ -1246,9 +1320,6 @@
if (f & O_NOFOLLOW)
retval &= ~LOOKUP_FOLLOW;
- if ((f & (O_CREAT|O_EXCL)) == (O_CREAT|O_EXCL))
- retval &= ~LOOKUP_FOLLOW;
-
if (f & O_DIRECTORY)
retval |= LOOKUP_DIRECTORY;
@@ -1416,27 +1487,27 @@
*/
int open_namei(const char * pathname, int flag, int mode, struct nameidata *nd)
{
- int acc_mode, error = 0;
+ int acc_mode, error;
struct path path;
struct dentry *dir;
int count = 0;
acc_mode = ACC_MODE(flag);
+ /* O_TRUNC implies we need access checks for write permissions */
+ if (flag & O_TRUNC)
+ acc_mode |= MAY_WRITE;
+
/* Allow the LSM permission hook to distinguish append
access from general write access. */
if (flag & O_APPEND)
acc_mode |= MAY_APPEND;
- /* Fill in the open() intent data */
- nd->intent.open.flags = flag;
- nd->intent.open.create_mode = mode;
-
/*
* The simplest case - just a plain lookup.
*/
if (!(flag & O_CREAT)) {
- error = path_lookup(pathname, lookup_flags(flag)|LOOKUP_OPEN, nd);
+ error = path_lookup_open(pathname, lookup_flags(flag), nd, flag);
if (error)
return error;
goto ok;
@@ -1445,7 +1516,7 @@
/*
* Create - we need to know the parent.
*/
- error = path_lookup(pathname, LOOKUP_PARENT|LOOKUP_OPEN|LOOKUP_CREATE, nd);
+ error = path_lookup_create(pathname, LOOKUP_PARENT, nd, flag, mode);
if (error)
return error;
@@ -1520,6 +1591,8 @@
exit_dput:
dput_path(&path, nd);
exit:
+ if (!IS_ERR(nd->intent.open.file))
+ release_open_intent(nd);
path_release(nd);
return error;
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 4a36839..44135af 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -142,7 +142,7 @@
/*
* Basic procedure for returning a delegation to the server
*/
-int nfs_inode_return_delegation(struct inode *inode)
+int __nfs_inode_return_delegation(struct inode *inode)
{
struct nfs4_client *clp = NFS_SERVER(inode)->nfs4_state;
struct nfs_inode *nfsi = NFS_I(inode);
diff --git a/fs/nfs/delegation.h b/fs/nfs/delegation.h
index 3f6c45a..8017846 100644
--- a/fs/nfs/delegation.h
+++ b/fs/nfs/delegation.h
@@ -25,7 +25,7 @@
int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res);
void nfs_inode_reclaim_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res);
-int nfs_inode_return_delegation(struct inode *inode);
+int __nfs_inode_return_delegation(struct inode *inode);
int nfs_async_inode_return_delegation(struct inode *inode, const nfs4_stateid *stateid);
struct inode *nfs_delegation_find_inode(struct nfs4_client *clp, const struct nfs_fh *fhandle);
@@ -47,11 +47,25 @@
return 1;
return 0;
}
+
+static inline int nfs_inode_return_delegation(struct inode *inode)
+{
+ int err = 0;
+
+ if (NFS_I(inode)->delegation != NULL)
+ err = __nfs_inode_return_delegation(inode);
+ return err;
+}
#else
static inline int nfs_have_delegation(struct inode *inode, int flags)
{
return 0;
}
+
+static inline int nfs_inode_return_delegation(struct inode *inode)
+{
+ return 0;
+}
#endif
#endif
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 2df639f..8272ed3 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -532,6 +532,7 @@
my_entry.eof = 0;
my_entry.fh = &fh;
my_entry.fattr = &fattr;
+ nfs_fattr_init(&fattr);
desc->entry = &my_entry;
while(!desc->entry->eof) {
@@ -565,8 +566,6 @@
}
}
unlock_kernel();
- if (desc->error < 0)
- return desc->error;
if (res < 0)
return res;
return 0;
@@ -803,6 +802,7 @@
*/
static void nfs_dentry_iput(struct dentry *dentry, struct inode *inode)
{
+ nfs_inode_return_delegation(inode);
if (dentry->d_flags & DCACHE_NFSFS_RENAMED) {
lock_kernel();
inode->i_nlink--;
@@ -853,12 +853,6 @@
dentry->d_op = NFS_PROTO(dir)->dentry_ops;
lock_kernel();
- /* Revalidate parent directory attribute cache */
- error = nfs_revalidate_inode(NFS_SERVER(dir), dir);
- if (error < 0) {
- res = ERR_PTR(error);
- goto out_unlock;
- }
/* If we're doing an exclusive create, optimize away the lookup */
if (nfs_is_exclusive_create(dir, nd))
@@ -916,7 +910,6 @@
static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
{
struct dentry *res = NULL;
- struct inode *inode = NULL;
int error;
/* Check that we are indeed trying to open this file */
@@ -930,8 +923,10 @@
dentry->d_op = NFS_PROTO(dir)->dentry_ops;
/* Let vfs_create() deal with O_EXCL */
- if (nd->intent.open.flags & O_EXCL)
- goto no_entry;
+ if (nd->intent.open.flags & O_EXCL) {
+ d_add(dentry, NULL);
+ goto out;
+ }
/* Open the file on the server */
lock_kernel();
@@ -945,32 +940,30 @@
if (nd->intent.open.flags & O_CREAT) {
nfs_begin_data_update(dir);
- inode = nfs4_atomic_open(dir, dentry, nd);
+ res = nfs4_atomic_open(dir, dentry, nd);
nfs_end_data_update(dir);
} else
- inode = nfs4_atomic_open(dir, dentry, nd);
+ res = nfs4_atomic_open(dir, dentry, nd);
unlock_kernel();
- if (IS_ERR(inode)) {
- error = PTR_ERR(inode);
+ if (IS_ERR(res)) {
+ error = PTR_ERR(res);
switch (error) {
/* Make a negative dentry */
case -ENOENT:
- inode = NULL;
- break;
+ res = NULL;
+ goto out;
/* This turned out not to be a regular file */
+ case -EISDIR:
+ case -ENOTDIR:
+ goto no_open;
case -ELOOP:
if (!(nd->intent.open.flags & O_NOFOLLOW))
goto no_open;
- /* case -EISDIR: */
/* case -EINVAL: */
default:
- res = ERR_PTR(error);
goto out;
}
- }
-no_entry:
- res = d_add_unique(dentry, inode);
- if (res != NULL)
+ } else if (res != NULL)
dentry = res;
nfs_renew_times(dentry);
nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
@@ -1014,7 +1007,7 @@
*/
lock_kernel();
verifier = nfs_save_change_attribute(dir);
- ret = nfs4_open_revalidate(dir, dentry, openflags);
+ ret = nfs4_open_revalidate(dir, dentry, openflags, nd);
if (!ret)
nfs_set_verifier(dentry, verifier);
unlock_kernel();
@@ -1137,7 +1130,7 @@
lock_kernel();
nfs_begin_data_update(dir);
- error = NFS_PROTO(dir)->create(dir, dentry, &attr, open_flags);
+ error = NFS_PROTO(dir)->create(dir, dentry, &attr, open_flags, nd);
nfs_end_data_update(dir);
if (error != 0)
goto out_err;
@@ -1332,6 +1325,7 @@
nfs_begin_data_update(dir);
if (inode != NULL) {
+ nfs_inode_return_delegation(inode);
nfs_begin_data_update(inode);
error = NFS_PROTO(dir)->remove(dir, &dentry->d_name);
/* The VFS may want to delete this inode */
@@ -1438,17 +1432,14 @@
old_dentry->d_parent->d_name.name, old_dentry->d_name.name,
dentry->d_parent->d_name.name, dentry->d_name.name);
- /*
- * Drop the dentry in advance to force a new lookup.
- * Since nfs_proc_link doesn't return a file handle,
- * we can't use the existing dentry.
- */
lock_kernel();
- d_drop(dentry);
-
nfs_begin_data_update(dir);
nfs_begin_data_update(inode);
error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name);
+ if (error == 0) {
+ atomic_inc(&inode->i_count);
+ d_instantiate(dentry, inode);
+ }
nfs_end_data_update(inode);
nfs_end_data_update(dir);
unlock_kernel();
@@ -1512,9 +1503,11 @@
*/
if (!new_inode)
goto go_ahead;
- if (S_ISDIR(new_inode->i_mode))
- goto out;
- else if (atomic_read(&new_dentry->d_count) > 2) {
+ if (S_ISDIR(new_inode->i_mode)) {
+ error = -EISDIR;
+ if (!S_ISDIR(old_inode->i_mode))
+ goto out;
+ } else if (atomic_read(&new_dentry->d_count) > 2) {
int err;
/* copy the target dentry's name */
dentry = d_alloc(new_dentry->d_parent,
@@ -1539,7 +1532,8 @@
#endif
goto out;
}
- }
+ } else
+ new_inode->i_nlink--;
go_ahead:
/*
@@ -1549,6 +1543,7 @@
nfs_wb_all(old_inode);
shrink_dcache_parent(old_dentry);
}
+ nfs_inode_return_delegation(old_inode);
if (new_inode)
d_delete(new_dentry);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 6bdcfa9..57d3e77 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -205,8 +205,8 @@
if (!status) {
status = ctx->error;
ctx->error = 0;
- if (!status && !nfs_have_delegation(inode, FMODE_READ))
- __nfs_revalidate_inode(NFS_SERVER(inode), inode);
+ if (!status)
+ nfs_revalidate_inode(NFS_SERVER(inode), inode);
}
unlock_kernel();
return status;
@@ -376,22 +376,31 @@
static int do_getlk(struct file *filp, int cmd, struct file_lock *fl)
{
+ struct file_lock *cfl;
struct inode *inode = filp->f_mapping->host;
int status = 0;
lock_kernel();
- /* Use local locking if mounted with "-onolock" */
- if (!(NFS_SERVER(inode)->flags & NFS_MOUNT_NONLM))
- status = NFS_PROTO(inode)->lock(filp, cmd, fl);
- else {
- struct file_lock *cfl = posix_test_lock(filp, fl);
-
- fl->fl_type = F_UNLCK;
- if (cfl != NULL)
- memcpy(fl, cfl, sizeof(*fl));
+ /* Try local locking first */
+ cfl = posix_test_lock(filp, fl);
+ if (cfl != NULL) {
+ locks_copy_lock(fl, cfl);
+ goto out;
}
+
+ if (nfs_have_delegation(inode, FMODE_READ))
+ goto out_noconflict;
+
+ if (NFS_SERVER(inode)->flags & NFS_MOUNT_NONLM)
+ goto out_noconflict;
+
+ status = NFS_PROTO(inode)->lock(filp, cmd, fl);
+out:
unlock_kernel();
return status;
+out_noconflict:
+ fl->fl_type = F_UNLCK;
+ goto out;
}
static int do_vfs_lock(struct file *file, struct file_lock *fl)
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index d4eadee..fc0f12b 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -358,6 +358,35 @@
return no_root_error;
}
+static void nfs_init_timeout_values(struct rpc_timeout *to, int proto, unsigned int timeo, unsigned int retrans)
+{
+ to->to_initval = timeo * HZ / 10;
+ to->to_retries = retrans;
+ if (!to->to_retries)
+ to->to_retries = 2;
+
+ switch (proto) {
+ case IPPROTO_TCP:
+ if (!to->to_initval)
+ to->to_initval = 60 * HZ;
+ if (to->to_initval > NFS_MAX_TCP_TIMEOUT)
+ to->to_initval = NFS_MAX_TCP_TIMEOUT;
+ to->to_increment = to->to_initval;
+ to->to_maxval = to->to_initval + (to->to_increment * to->to_retries);
+ to->to_exponential = 0;
+ break;
+ case IPPROTO_UDP:
+ default:
+ if (!to->to_initval)
+ to->to_initval = 11 * HZ / 10;
+ if (to->to_initval > NFS_MAX_UDP_TIMEOUT)
+ to->to_initval = NFS_MAX_UDP_TIMEOUT;
+ to->to_maxval = NFS_MAX_UDP_TIMEOUT;
+ to->to_exponential = 1;
+ break;
+ }
+}
+
/*
* Create an RPC client handle.
*/
@@ -367,22 +396,12 @@
struct rpc_timeout timeparms;
struct rpc_xprt *xprt = NULL;
struct rpc_clnt *clnt = NULL;
- int tcp = (data->flags & NFS_MOUNT_TCP);
+ int proto = (data->flags & NFS_MOUNT_TCP) ? IPPROTO_TCP : IPPROTO_UDP;
- /* Initialize timeout values */
- timeparms.to_initval = data->timeo * HZ / 10;
- timeparms.to_retries = data->retrans;
- timeparms.to_maxval = tcp ? RPC_MAX_TCP_TIMEOUT : RPC_MAX_UDP_TIMEOUT;
- timeparms.to_exponential = 1;
-
- if (!timeparms.to_initval)
- timeparms.to_initval = (tcp ? 600 : 11) * HZ / 10;
- if (!timeparms.to_retries)
- timeparms.to_retries = 5;
+ nfs_init_timeout_values(&timeparms, proto, data->timeo, data->retrans);
/* create transport and client */
- xprt = xprt_create_proto(tcp ? IPPROTO_TCP : IPPROTO_UDP,
- &server->addr, &timeparms);
+ xprt = xprt_create_proto(proto, &server->addr, &timeparms);
if (IS_ERR(xprt)) {
dprintk("%s: cannot create RPC transport. Error = %ld\n",
__FUNCTION__, PTR_ERR(xprt));
@@ -576,7 +595,6 @@
{ NFS_MOUNT_SOFT, ",soft", ",hard" },
{ NFS_MOUNT_INTR, ",intr", "" },
{ NFS_MOUNT_POSIX, ",posix", "" },
- { NFS_MOUNT_TCP, ",tcp", ",udp" },
{ NFS_MOUNT_NOCTO, ",nocto", "" },
{ NFS_MOUNT_NOAC, ",noac", "" },
{ NFS_MOUNT_NONLM, ",nolock", ",lock" },
@@ -585,6 +603,8 @@
};
struct proc_nfs_info *nfs_infop;
struct nfs_server *nfss = NFS_SB(mnt->mnt_sb);
+ char buf[12];
+ char *proto;
seq_printf(m, ",v%d", nfss->rpc_ops->version);
seq_printf(m, ",rsize=%d", nfss->rsize);
@@ -603,6 +623,18 @@
else
seq_puts(m, nfs_infop->nostr);
}
+ switch (nfss->client->cl_xprt->prot) {
+ case IPPROTO_TCP:
+ proto = "tcp";
+ break;
+ case IPPROTO_UDP:
+ proto = "udp";
+ break;
+ default:
+ snprintf(buf, sizeof(buf), "%u", nfss->client->cl_xprt->prot);
+ proto = buf;
+ }
+ seq_printf(m, ",proto=%s", proto);
seq_puts(m, ",addr=");
seq_escape(m, nfss->hostname, " \t\n\\");
return 0;
@@ -753,7 +785,8 @@
else
init_special_inode(inode, inode->i_mode, fattr->rdev);
- nfsi->read_cache_jiffies = fattr->timestamp;
+ nfsi->read_cache_jiffies = fattr->time_start;
+ nfsi->last_updated = jiffies;
inode->i_atime = fattr->atime;
inode->i_mtime = fattr->mtime;
inode->i_ctime = fattr->ctime;
@@ -821,6 +854,11 @@
filemap_fdatawait(inode->i_mapping);
nfs_wb_all(inode);
}
+ /*
+ * Return any delegations if we're going to change ACLs
+ */
+ if ((attr->ia_valid & (ATTR_MODE|ATTR_UID|ATTR_GID)) != 0)
+ nfs_inode_return_delegation(inode);
error = NFS_PROTO(inode)->setattr(dentry, &fattr, attr);
if (error == 0)
nfs_refresh_inode(inode, &fattr);
@@ -1019,15 +1057,11 @@
ctx->mode = filp->f_mode;
nfs_file_set_open_context(filp, ctx);
put_nfs_open_context(ctx);
- if ((filp->f_mode & FMODE_WRITE) != 0)
- nfs_begin_data_update(inode);
return 0;
}
int nfs_release(struct inode *inode, struct file *filp)
{
- if ((filp->f_mode & FMODE_WRITE) != 0)
- nfs_end_data_update(inode);
nfs_file_clear_open_context(filp);
return 0;
}
@@ -1083,14 +1117,15 @@
goto out;
}
+ spin_lock(&inode->i_lock);
status = nfs_update_inode(inode, &fattr, verifier);
if (status) {
+ spin_unlock(&inode->i_lock);
dfprintk(PAGECACHE, "nfs_revalidate_inode: (%s/%Ld) refresh failed, error=%d\n",
inode->i_sb->s_id,
(long long)NFS_FILEID(inode), status);
goto out;
}
- spin_lock(&inode->i_lock);
cache_validity = nfsi->cache_validity;
nfsi->cache_validity &= ~NFS_INO_REVAL_PAGECACHE;
@@ -1098,7 +1133,7 @@
* We may need to keep the attributes marked as invalid if
* we raced with nfs_end_attr_update().
*/
- if (verifier == nfsi->cache_change_attribute)
+ if (time_after_eq(verifier, nfsi->cache_change_attribute))
nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME);
spin_unlock(&inode->i_lock);
@@ -1165,7 +1200,7 @@
if (S_ISDIR(inode->i_mode)) {
memset(nfsi->cookieverf, 0, sizeof(nfsi->cookieverf));
/* This ensures we revalidate child dentries */
- nfsi->cache_change_attribute++;
+ nfsi->cache_change_attribute = jiffies;
}
spin_unlock(&inode->i_lock);
@@ -1197,20 +1232,19 @@
struct nfs_inode *nfsi = NFS_I(inode);
if (!nfs_have_delegation(inode, FMODE_READ)) {
- /* Mark the attribute cache for revalidation */
- spin_lock(&inode->i_lock);
- nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
- /* Directories and symlinks: invalidate page cache too */
- if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
+ /* Directories and symlinks: invalidate page cache */
+ if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) {
+ spin_lock(&inode->i_lock);
nfsi->cache_validity |= NFS_INO_INVALID_DATA;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&inode->i_lock);
+ }
}
- nfsi->cache_change_attribute ++;
+ nfsi->cache_change_attribute = jiffies;
atomic_dec(&nfsi->data_updates);
}
/**
- * nfs_refresh_inode - verify consistency of the inode attribute cache
+ * nfs_check_inode_attributes - verify consistency of the inode attribute cache
* @inode - pointer to inode
* @fattr - updated attributes
*
@@ -1218,13 +1252,12 @@
* so that fattr carries weak cache consistency data, then it may
* also update the ctime/mtime/change_attribute.
*/
-int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
+static int nfs_check_inode_attributes(struct inode *inode, struct nfs_fattr *fattr)
{
struct nfs_inode *nfsi = NFS_I(inode);
loff_t cur_size, new_isize;
int data_unstable;
- spin_lock(&inode->i_lock);
/* Are we in the process of updating data on the server? */
data_unstable = nfs_caches_unstable(inode);
@@ -1241,14 +1274,12 @@
}
if ((fattr->valid & NFS_ATTR_FATTR) == 0) {
- spin_unlock(&inode->i_lock);
return 0;
}
/* Has the inode gone and changed behind our back? */
if (nfsi->fileid != fattr->fileid
|| (inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) {
- spin_unlock(&inode->i_lock);
return -EIO;
}
@@ -1288,11 +1319,67 @@
if (!timespec_equal(&inode->i_atime, &fattr->atime))
nfsi->cache_validity |= NFS_INO_INVALID_ATIME;
- nfsi->read_cache_jiffies = fattr->timestamp;
- spin_unlock(&inode->i_lock);
+ nfsi->read_cache_jiffies = fattr->time_start;
return 0;
}
+/**
+ * nfs_refresh_inode - try to update the inode attribute cache
+ * @inode - pointer to inode
+ * @fattr - updated attributes
+ *
+ * Check that an RPC call that returned attributes has not overlapped with
+ * other recent updates of the inode metadata, then decide whether it is
+ * safe to do a full update of the inode attributes, or whether just to
+ * call nfs_check_inode_attributes.
+ */
+int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
+{
+ struct nfs_inode *nfsi = NFS_I(inode);
+ int status;
+
+ if ((fattr->valid & NFS_ATTR_FATTR) == 0)
+ return 0;
+ spin_lock(&inode->i_lock);
+ nfsi->cache_validity &= ~NFS_INO_REVAL_PAGECACHE;
+ if (nfs_verify_change_attribute(inode, fattr->time_start))
+ nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME);
+ if (time_after(fattr->time_start, nfsi->last_updated))
+ status = nfs_update_inode(inode, fattr, fattr->time_start);
+ else
+ status = nfs_check_inode_attributes(inode, fattr);
+
+ spin_unlock(&inode->i_lock);
+ return status;
+}
+
+/**
+ * nfs_post_op_update_inode - try to update the inode attribute cache
+ * @inode - pointer to inode
+ * @fattr - updated attributes
+ *
+ * After an operation that has changed the inode metadata, mark the
+ * attribute cache as being invalid, then try to update it.
+ */
+int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr)
+{
+ struct nfs_inode *nfsi = NFS_I(inode);
+ int status = 0;
+
+ spin_lock(&inode->i_lock);
+ if (unlikely((fattr->valid & NFS_ATTR_FATTR) == 0)) {
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS;
+ goto out;
+ }
+ status = nfs_update_inode(inode, fattr, fattr->time_start);
+ if (time_after_eq(fattr->time_start, nfsi->cache_change_attribute))
+ nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME|NFS_INO_REVAL_PAGECACHE);
+ nfsi->cache_change_attribute = jiffies;
+out:
+ spin_unlock(&inode->i_lock);
+ return status;
+}
+
/*
* Many nfs protocol calls return the new file attributes after
* an operation. Here we update the inode to reflect the state
@@ -1328,20 +1415,17 @@
goto out_err;
}
- spin_lock(&inode->i_lock);
-
/*
* Make sure the inode's type hasn't changed.
*/
- if ((inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) {
- spin_unlock(&inode->i_lock);
+ if ((inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT))
goto out_changed;
- }
/*
* Update the read time so we don't revalidate too often.
*/
- nfsi->read_cache_jiffies = fattr->timestamp;
+ nfsi->read_cache_jiffies = fattr->time_start;
+ nfsi->last_updated = jiffies;
/* Are we racing with known updates of the metadata on the server? */
data_unstable = ! (nfs_verify_change_attribute(inode, verifier) ||
@@ -1354,7 +1438,7 @@
/* Do we perhaps have any outstanding writes? */
if (nfsi->npages == 0) {
/* No, but did we race with nfs_end_data_update()? */
- if (verifier == nfsi->cache_change_attribute) {
+ if (time_after_eq(verifier, nfsi->cache_change_attribute)) {
inode->i_size = new_isize;
invalid |= NFS_INO_INVALID_DATA;
}
@@ -1430,7 +1514,6 @@
if (!nfs_have_delegation(inode, FMODE_READ))
nfsi->cache_validity |= invalid;
- spin_unlock(&inode->i_lock);
return 0;
out_changed:
/*
@@ -1639,8 +1722,7 @@
struct nfs_inode *nfsi = NFS_I(inode);
/* If we are holding a delegation, return it! */
- if (nfsi->delegation != NULL)
- nfs_inode_return_delegation(inode);
+ nfs_inode_return_delegation(inode);
/* First call standard NFS clear_inode() code */
nfs_clear_inode(inode);
/* Now clear out any remaining state */
@@ -1669,7 +1751,7 @@
struct rpc_clnt *clnt = NULL;
struct rpc_timeout timeparms;
rpc_authflavor_t authflavour;
- int proto, err = -EIO;
+ int err = -EIO;
sb->s_blocksize_bits = 0;
sb->s_blocksize = 0;
@@ -1687,30 +1769,8 @@
server->acdirmax = data->acdirmax*HZ;
server->rpc_ops = &nfs_v4_clientops;
- /* Initialize timeout values */
- timeparms.to_initval = data->timeo * HZ / 10;
- timeparms.to_retries = data->retrans;
- timeparms.to_exponential = 1;
- if (!timeparms.to_retries)
- timeparms.to_retries = 5;
-
- proto = data->proto;
- /* Which IP protocol do we use? */
- switch (proto) {
- case IPPROTO_TCP:
- timeparms.to_maxval = RPC_MAX_TCP_TIMEOUT;
- if (!timeparms.to_initval)
- timeparms.to_initval = 600 * HZ / 10;
- break;
- case IPPROTO_UDP:
- timeparms.to_maxval = RPC_MAX_UDP_TIMEOUT;
- if (!timeparms.to_initval)
- timeparms.to_initval = 11 * HZ / 10;
- break;
- default:
- return -EINVAL;
- }
+ nfs_init_timeout_values(&timeparms, data->proto, data->timeo, data->retrans);
clp = nfs4_get_client(&server->addr.sin_addr);
if (!clp) {
@@ -1735,7 +1795,7 @@
down_write(&clp->cl_sem);
if (IS_ERR(clp->cl_rpcclient)) {
- xprt = xprt_create_proto(proto, &server->addr, &timeparms);
+ xprt = xprt_create_proto(data->proto, &server->addr, &timeparms);
if (IS_ERR(xprt)) {
up_write(&clp->cl_sem);
err = PTR_ERR(xprt);
diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index d91b690..59049e8 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -143,7 +143,6 @@
fattr->mode = (fattr->mode & ~S_IFMT) | S_IFIFO;
fattr->rdev = 0;
}
- fattr->timestamp = jiffies;
return p;
}
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index edc9551..92c870d 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -78,7 +78,7 @@
int status;
dprintk("%s: call fsinfo\n", __FUNCTION__);
- info->fattr->valid = 0;
+ nfs_fattr_init(info->fattr);
status = rpc_call(server->client_sys, NFS3PROC_FSINFO, fhandle, info, 0);
dprintk("%s: reply fsinfo: %d\n", __FUNCTION__, status);
if (!(info->fattr->valid & NFS_ATTR_FATTR)) {
@@ -98,7 +98,7 @@
int status;
dprintk("NFS call getattr\n");
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call(server->client, NFS3PROC_GETATTR,
fhandle, fattr, 0);
dprintk("NFS reply getattr: %d\n", status);
@@ -117,7 +117,7 @@
int status;
dprintk("NFS call setattr\n");
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call(NFS_CLIENT(inode), NFS3PROC_SETATTR, &arg, fattr, 0);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
@@ -143,8 +143,8 @@
int status;
dprintk("NFS call lookup %s\n", name->name);
- dir_attr.valid = 0;
- fattr->valid = 0;
+ nfs_fattr_init(&dir_attr);
+ nfs_fattr_init(fattr);
status = rpc_call(NFS_CLIENT(dir), NFS3PROC_LOOKUP, &arg, &res, 0);
if (status >= 0 && !(fattr->valid & NFS_ATTR_FATTR))
status = rpc_call(NFS_CLIENT(dir), NFS3PROC_GETATTR,
@@ -174,7 +174,6 @@
int status;
dprintk("NFS call access\n");
- fattr.valid = 0;
if (mode & MAY_READ)
arg.access |= NFS3_ACCESS_READ;
@@ -189,6 +188,7 @@
if (mode & MAY_EXEC)
arg.access |= NFS3_ACCESS_EXECUTE;
}
+ nfs_fattr_init(&fattr);
status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
nfs_refresh_inode(inode, &fattr);
if (status == 0) {
@@ -217,7 +217,7 @@
int status;
dprintk("NFS call readlink\n");
- fattr.valid = 0;
+ nfs_fattr_init(&fattr);
status = rpc_call(NFS_CLIENT(inode), NFS3PROC_READLINK,
&args, &fattr, 0);
nfs_refresh_inode(inode, &fattr);
@@ -240,7 +240,7 @@
dprintk("NFS call read %d @ %Ld\n", rdata->args.count,
(long long) rdata->args.offset);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags);
if (status >= 0)
nfs_refresh_inode(inode, fattr);
@@ -263,10 +263,10 @@
dprintk("NFS call write %d @ %Ld\n", wdata->args.count,
(long long) wdata->args.offset);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call_sync(NFS_CLIENT(inode), &msg, rpcflags);
if (status >= 0)
- nfs_refresh_inode(inode, fattr);
+ nfs_post_op_update_inode(inode, fattr);
dprintk("NFS reply write: %d\n", status);
return status < 0? status : wdata->res.count;
}
@@ -285,10 +285,10 @@
dprintk("NFS call commit %d @ %Ld\n", cdata->args.count,
(long long) cdata->args.offset);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
if (status >= 0)
- nfs_refresh_inode(inode, fattr);
+ nfs_post_op_update_inode(inode, fattr);
dprintk("NFS reply commit: %d\n", status);
return status;
}
@@ -299,7 +299,7 @@
*/
static int
nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
- int flags)
+ int flags, struct nameidata *nd)
{
struct nfs_fh fhandle;
struct nfs_fattr fattr;
@@ -329,10 +329,10 @@
sattr->ia_mode &= ~current->fs->umask;
again:
- dir_attr.valid = 0;
- fattr.valid = 0;
+ nfs_fattr_init(&dir_attr);
+ nfs_fattr_init(&fattr);
status = rpc_call(NFS_CLIENT(dir), NFS3PROC_CREATE, &arg, &res, 0);
- nfs_refresh_inode(dir, &dir_attr);
+ nfs_post_op_update_inode(dir, &dir_attr);
/* If the server doesn't support the exclusive creation semantics,
* try again with simple 'guarded' mode. */
@@ -401,9 +401,9 @@
int status;
dprintk("NFS call remove %s\n", name->name);
- dir_attr.valid = 0;
+ nfs_fattr_init(&dir_attr);
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
- nfs_refresh_inode(dir, &dir_attr);
+ nfs_post_op_update_inode(dir, &dir_attr);
dprintk("NFS reply remove: %d\n", status);
return status;
}
@@ -422,7 +422,7 @@
ptr->arg.fh = NFS_FH(dir->d_inode);
ptr->arg.name = name->name;
ptr->arg.len = name->len;
- ptr->res.valid = 0;
+ nfs_fattr_init(&ptr->res);
msg->rpc_proc = &nfs3_procedures[NFS3PROC_REMOVE];
msg->rpc_argp = &ptr->arg;
msg->rpc_resp = &ptr->res;
@@ -439,7 +439,7 @@
return 1;
if (msg->rpc_argp) {
dir_attr = (struct nfs_fattr*)msg->rpc_resp;
- nfs_refresh_inode(dir->d_inode, dir_attr);
+ nfs_post_op_update_inode(dir->d_inode, dir_attr);
kfree(msg->rpc_argp);
}
return 0;
@@ -465,11 +465,11 @@
int status;
dprintk("NFS call rename %s -> %s\n", old_name->name, new_name->name);
- old_dir_attr.valid = 0;
- new_dir_attr.valid = 0;
+ nfs_fattr_init(&old_dir_attr);
+ nfs_fattr_init(&new_dir_attr);
status = rpc_call(NFS_CLIENT(old_dir), NFS3PROC_RENAME, &arg, &res, 0);
- nfs_refresh_inode(old_dir, &old_dir_attr);
- nfs_refresh_inode(new_dir, &new_dir_attr);
+ nfs_post_op_update_inode(old_dir, &old_dir_attr);
+ nfs_post_op_update_inode(new_dir, &new_dir_attr);
dprintk("NFS reply rename: %d\n", status);
return status;
}
@@ -491,11 +491,11 @@
int status;
dprintk("NFS call link %s\n", name->name);
- dir_attr.valid = 0;
- fattr.valid = 0;
+ nfs_fattr_init(&dir_attr);
+ nfs_fattr_init(&fattr);
status = rpc_call(NFS_CLIENT(inode), NFS3PROC_LINK, &arg, &res, 0);
- nfs_refresh_inode(dir, &dir_attr);
- nfs_refresh_inode(inode, &fattr);
+ nfs_post_op_update_inode(dir, &dir_attr);
+ nfs_post_op_update_inode(inode, &fattr);
dprintk("NFS reply link: %d\n", status);
return status;
}
@@ -524,10 +524,10 @@
if (path->len > NFS3_MAXPATHLEN)
return -ENAMETOOLONG;
dprintk("NFS call symlink %s -> %s\n", name->name, path->name);
- dir_attr.valid = 0;
- fattr->valid = 0;
+ nfs_fattr_init(&dir_attr);
+ nfs_fattr_init(fattr);
status = rpc_call(NFS_CLIENT(dir), NFS3PROC_SYMLINK, &arg, &res, 0);
- nfs_refresh_inode(dir, &dir_attr);
+ nfs_post_op_update_inode(dir, &dir_attr);
dprintk("NFS reply symlink: %d\n", status);
return status;
}
@@ -552,13 +552,13 @@
int status;
dprintk("NFS call mkdir %s\n", dentry->d_name.name);
- dir_attr.valid = 0;
- fattr.valid = 0;
sattr->ia_mode &= ~current->fs->umask;
+ nfs_fattr_init(&dir_attr);
+ nfs_fattr_init(&fattr);
status = rpc_call(NFS_CLIENT(dir), NFS3PROC_MKDIR, &arg, &res, 0);
- nfs_refresh_inode(dir, &dir_attr);
+ nfs_post_op_update_inode(dir, &dir_attr);
if (status != 0)
goto out;
status = nfs_instantiate(dentry, &fhandle, &fattr);
@@ -582,9 +582,9 @@
int status;
dprintk("NFS call rmdir %s\n", name->name);
- dir_attr.valid = 0;
+ nfs_fattr_init(&dir_attr);
status = rpc_call(NFS_CLIENT(dir), NFS3PROC_RMDIR, &arg, &dir_attr, 0);
- nfs_refresh_inode(dir, &dir_attr);
+ nfs_post_op_update_inode(dir, &dir_attr);
dprintk("NFS reply rmdir: %d\n", status);
return status;
}
@@ -634,7 +634,7 @@
dprintk("NFS call readdir%s %d\n",
plus? "plus" : "", (unsigned int) cookie);
- dir_attr.valid = 0;
+ nfs_fattr_init(&dir_attr);
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
nfs_refresh_inode(dir, &dir_attr);
dprintk("NFS reply readdir: %d\n", status);
@@ -676,10 +676,10 @@
sattr->ia_mode &= ~current->fs->umask;
- dir_attr.valid = 0;
- fattr.valid = 0;
+ nfs_fattr_init(&dir_attr);
+ nfs_fattr_init(&fattr);
status = rpc_call(NFS_CLIENT(dir), NFS3PROC_MKNOD, &arg, &res, 0);
- nfs_refresh_inode(dir, &dir_attr);
+ nfs_post_op_update_inode(dir, &dir_attr);
if (status != 0)
goto out;
status = nfs_instantiate(dentry, &fh, &fattr);
@@ -698,7 +698,7 @@
int status;
dprintk("NFS call fsstat\n");
- stat->fattr->valid = 0;
+ nfs_fattr_init(stat->fattr);
status = rpc_call(server->client, NFS3PROC_FSSTAT, fhandle, stat, 0);
dprintk("NFS reply statfs: %d\n", status);
return status;
@@ -711,7 +711,7 @@
int status;
dprintk("NFS call fsinfo\n");
- info->fattr->valid = 0;
+ nfs_fattr_init(info->fattr);
status = rpc_call(server->client_sys, NFS3PROC_FSINFO, fhandle, info, 0);
dprintk("NFS reply fsinfo: %d\n", status);
return status;
@@ -724,7 +724,7 @@
int status;
dprintk("NFS call pathconf\n");
- info->fattr->valid = 0;
+ nfs_fattr_init(info->fattr);
status = rpc_call(server->client, NFS3PROC_PATHCONF, fhandle, info, 0);
dprintk("NFS reply pathconf: %d\n", status);
return status;
@@ -735,7 +735,7 @@
static void
nfs3_read_done(struct rpc_task *task)
{
- struct nfs_write_data *data = (struct nfs_write_data *) task->tk_calldata;
+ struct nfs_read_data *data = (struct nfs_read_data *) task->tk_calldata;
if (nfs3_async_handle_jukebox(task))
return;
@@ -775,7 +775,7 @@
return;
data = (struct nfs_write_data *)task->tk_calldata;
if (task->tk_status >= 0)
- nfs_refresh_inode(data->inode, data->res.fattr);
+ nfs_post_op_update_inode(data->inode, data->res.fattr);
nfs_writeback_done(task);
}
@@ -819,7 +819,7 @@
return;
data = (struct nfs_write_data *)task->tk_calldata;
if (task->tk_status >= 0)
- nfs_refresh_inode(data->inode, data->res.fattr);
+ nfs_post_op_update_inode(data->inode, data->res.fattr);
nfs_commit_done(task);
}
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index db4a904..0498bd3 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -174,7 +174,6 @@
/* Update the mode bits */
fattr->valid |= (NFS_ATTR_FATTR | NFS_ATTR_FATTR_V3);
- fattr->timestamp = jiffies;
return p;
}
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index ec1a22d..78a53f5 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -93,25 +93,50 @@
};
/*
+ * struct rpc_sequence ensures that RPC calls are sent in the exact
+ * order that they appear on the list.
+ */
+struct rpc_sequence {
+ struct rpc_wait_queue wait; /* RPC call delay queue */
+ spinlock_t lock; /* Protects the list */
+ struct list_head list; /* Defines sequence of RPC calls */
+};
+
+#define NFS_SEQID_CONFIRMED 1
+struct nfs_seqid_counter {
+ struct rpc_sequence *sequence;
+ int flags;
+ u32 counter;
+};
+
+struct nfs_seqid {
+ struct nfs_seqid_counter *sequence;
+ struct list_head list;
+};
+
+static inline void nfs_confirm_seqid(struct nfs_seqid_counter *seqid, int status)
+{
+ if (seqid_mutating_err(-status))
+ seqid->flags |= NFS_SEQID_CONFIRMED;
+}
+
+/*
* NFS4 state_owners and lock_owners are simply labels for ordered
* sequences of RPC calls. Their sole purpose is to provide once-only
* semantics by allowing the server to identify replayed requests.
- *
- * The ->so_sema is held during all state_owner seqid-mutating operations:
- * OPEN, OPEN_DOWNGRADE, and CLOSE. Its purpose is to properly serialize
- * so_seqid.
*/
struct nfs4_state_owner {
+ spinlock_t so_lock;
struct list_head so_list; /* per-clientid list of state_owners */
struct nfs4_client *so_client;
u32 so_id; /* 32-bit identifier, unique */
- struct semaphore so_sema;
- u32 so_seqid; /* protected by so_sema */
atomic_t so_count;
struct rpc_cred *so_cred; /* Associated cred */
struct list_head so_states;
struct list_head so_delegations;
+ struct nfs_seqid_counter so_seqid;
+ struct rpc_sequence so_sequence;
};
/*
@@ -132,7 +157,7 @@
fl_owner_t ls_owner; /* POSIX lock owner */
#define NFS_LOCK_INITIALIZED 1
int ls_flags;
- u32 ls_seqid;
+ struct nfs_seqid_counter ls_seqid;
u32 ls_id;
nfs4_stateid ls_stateid;
atomic_t ls_count;
@@ -153,7 +178,6 @@
struct inode *inode; /* Pointer to the inode */
unsigned long flags; /* Do we hold any locks? */
- struct semaphore lock_sema; /* Serializes file locking operations */
spinlock_t state_lock; /* Protects the lock_states list */
nfs4_stateid stateid;
@@ -191,8 +215,8 @@
extern int nfs4_proc_async_renew(struct nfs4_client *);
extern int nfs4_proc_renew(struct nfs4_client *);
extern int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode);
-extern struct inode *nfs4_atomic_open(struct inode *, struct dentry *, struct nameidata *);
-extern int nfs4_open_revalidate(struct inode *, struct dentry *, int);
+extern struct dentry *nfs4_atomic_open(struct inode *, struct dentry *, struct nameidata *);
+extern int nfs4_open_revalidate(struct inode *, struct dentry *, int, struct nameidata *);
extern struct nfs4_state_recovery_ops nfs4_reboot_recovery_ops;
extern struct nfs4_state_recovery_ops nfs4_network_partition_recovery_ops;
@@ -224,12 +248,17 @@
extern void nfs4_put_open_state(struct nfs4_state *);
extern void nfs4_close_state(struct nfs4_state *, mode_t);
extern struct nfs4_state *nfs4_find_state(struct inode *, struct rpc_cred *, mode_t mode);
-extern void nfs4_increment_seqid(int status, struct nfs4_state_owner *sp);
extern void nfs4_schedule_state_recovery(struct nfs4_client *);
+extern void nfs4_put_lock_state(struct nfs4_lock_state *lsp);
extern int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl);
-extern void nfs4_increment_lock_seqid(int status, struct nfs4_lock_state *ls);
extern void nfs4_copy_stateid(nfs4_stateid *, struct nfs4_state *, fl_owner_t);
+extern struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter);
+extern int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task);
+extern void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid);
+extern void nfs_increment_lock_seqid(int status, struct nfs_seqid *seqid);
+extern void nfs_free_seqid(struct nfs_seqid *seqid);
+
extern const nfs4_stateid zero_stateid;
/* nfs4xdr.c */
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 9701ca8..933e13b 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -47,6 +47,7 @@
#include <linux/nfs_page.h>
#include <linux/smp_lock.h>
#include <linux/namei.h>
+#include <linux/mount.h>
#include "nfs4_fs.h"
#include "delegation.h"
@@ -56,10 +57,11 @@
#define NFS4_POLL_RETRY_MIN (1*HZ)
#define NFS4_POLL_RETRY_MAX (15*HZ)
+static int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid, struct nfs_seqid *seqid);
static int nfs4_do_fsinfo(struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *);
-static int nfs4_async_handle_error(struct rpc_task *, struct nfs_server *);
+static int nfs4_async_handle_error(struct rpc_task *, const struct nfs_server *);
static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry);
-static int nfs4_handle_exception(struct nfs_server *server, int errorcode, struct nfs4_exception *exception);
+static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, struct nfs4_exception *exception);
extern u32 *nfs4_decode_dirent(u32 *p, struct nfs_entry *entry, int plus);
extern struct rpc_procinfo nfs4_procedures[];
@@ -185,8 +187,26 @@
{
struct nfs_inode *nfsi = NFS_I(inode);
+ spin_lock(&inode->i_lock);
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (cinfo->before == nfsi->change_attr && cinfo->atomic)
nfsi->change_attr = cinfo->after;
+ spin_unlock(&inode->i_lock);
+}
+
+/* Helper for asynchronous RPC calls */
+static int nfs4_call_async(struct rpc_clnt *clnt, rpc_action tk_begin,
+ rpc_action tk_exit, void *calldata)
+{
+ struct rpc_task *task;
+
+ if (!(task = rpc_new_task(clnt, tk_exit, RPC_TASK_ASYNC)))
+ return -ENOMEM;
+
+ task->tk_calldata = calldata;
+ task->tk_action = tk_begin;
+ rpc_execute(task);
+ return 0;
}
static void update_open_stateid(struct nfs4_state *state, nfs4_stateid *stateid, int open_flags)
@@ -195,6 +215,7 @@
open_flags &= (FMODE_READ|FMODE_WRITE);
/* Protect against nfs4_find_state() */
+ spin_lock(&state->owner->so_lock);
spin_lock(&inode->i_lock);
state->state |= open_flags;
/* NB! List reordering - see the reclaim code for why. */
@@ -204,12 +225,12 @@
state->nreaders++;
memcpy(&state->stateid, stateid, sizeof(state->stateid));
spin_unlock(&inode->i_lock);
+ spin_unlock(&state->owner->so_lock);
}
/*
* OPEN_RECLAIM:
* reclaim state on the server after a reboot.
- * Assumes caller is holding the sp->so_sem
*/
static int _nfs4_open_reclaim(struct nfs4_state_owner *sp, struct nfs4_state *state)
{
@@ -218,7 +239,6 @@
struct nfs_delegation *delegation = NFS_I(inode)->delegation;
struct nfs_openargs o_arg = {
.fh = NFS_FH(inode),
- .seqid = sp->so_seqid,
.id = sp->so_id,
.open_flags = state->state,
.clientid = server->nfs4_state->cl_clientid,
@@ -245,8 +265,13 @@
}
o_arg.u.delegation_type = delegation->type;
}
+ o_arg.seqid = nfs_alloc_seqid(&sp->so_seqid);
+ if (o_arg.seqid == NULL)
+ return -ENOMEM;
status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR);
- nfs4_increment_seqid(status, sp);
+ /* Confirm the sequence as being established */
+ nfs_confirm_seqid(&sp->so_seqid, status);
+ nfs_increment_open_seqid(status, o_arg.seqid);
if (status == 0) {
memcpy(&state->stateid, &o_res.stateid, sizeof(state->stateid));
if (o_res.delegation_type != 0) {
@@ -256,6 +281,7 @@
nfs_async_inode_return_delegation(inode, &o_res.stateid);
}
}
+ nfs_free_seqid(o_arg.seqid);
clear_bit(NFS_DELEGATED_STATE, &state->flags);
/* Ensure we update the inode attributes */
NFS_CACHEINV(inode);
@@ -302,23 +328,35 @@
};
int status = 0;
- down(&sp->so_sema);
if (!test_bit(NFS_DELEGATED_STATE, &state->flags))
goto out;
if (state->state == 0)
goto out;
- arg.seqid = sp->so_seqid;
+ arg.seqid = nfs_alloc_seqid(&sp->so_seqid);
+ status = -ENOMEM;
+ if (arg.seqid == NULL)
+ goto out;
arg.open_flags = state->state;
memcpy(arg.u.delegation.data, state->stateid.data, sizeof(arg.u.delegation.data));
status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR);
- nfs4_increment_seqid(status, sp);
+ nfs_increment_open_seqid(status, arg.seqid);
+ if (status != 0)
+ goto out_free;
+ if(res.rflags & NFS4_OPEN_RESULT_CONFIRM) {
+ status = _nfs4_proc_open_confirm(server->client, NFS_FH(inode),
+ sp, &res.stateid, arg.seqid);
+ if (status != 0)
+ goto out_free;
+ }
+ nfs_confirm_seqid(&sp->so_seqid, 0);
if (status >= 0) {
memcpy(state->stateid.data, res.stateid.data,
sizeof(state->stateid.data));
clear_bit(NFS_DELEGATED_STATE, &state->flags);
}
+out_free:
+ nfs_free_seqid(arg.seqid);
out:
- up(&sp->so_sema);
dput(parent);
return status;
}
@@ -345,11 +383,11 @@
return err;
}
-static inline int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid)
+static int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid, struct nfs_seqid *seqid)
{
struct nfs_open_confirmargs arg = {
.fh = fh,
- .seqid = sp->so_seqid,
+ .seqid = seqid,
.stateid = *stateid,
};
struct nfs_open_confirmres res;
@@ -362,7 +400,9 @@
int status;
status = rpc_call_sync(clnt, &msg, RPC_TASK_NOINTR);
- nfs4_increment_seqid(status, sp);
+ /* Confirm the sequence as being established */
+ nfs_confirm_seqid(&sp->so_seqid, status);
+ nfs_increment_open_seqid(status, seqid);
if (status >= 0)
memcpy(stateid, &res.stateid, sizeof(*stateid));
return status;
@@ -380,21 +420,41 @@
int status;
/* Update sequence id. The caller must serialize! */
- o_arg->seqid = sp->so_seqid;
o_arg->id = sp->so_id;
o_arg->clientid = sp->so_client->cl_clientid;
status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR);
- nfs4_increment_seqid(status, sp);
+ if (status == 0) {
+ /* OPEN on anything except a regular file is disallowed in NFSv4 */
+ switch (o_res->f_attr->mode & S_IFMT) {
+ case S_IFREG:
+ break;
+ case S_IFLNK:
+ status = -ELOOP;
+ break;
+ case S_IFDIR:
+ status = -EISDIR;
+ break;
+ default:
+ status = -ENOTDIR;
+ }
+ }
+
+ nfs_increment_open_seqid(status, o_arg->seqid);
if (status != 0)
goto out;
- update_changeattr(dir, &o_res->cinfo);
+ if (o_arg->open_flags & O_CREAT) {
+ update_changeattr(dir, &o_res->cinfo);
+ nfs_post_op_update_inode(dir, o_res->dir_attr);
+ } else
+ nfs_refresh_inode(dir, o_res->dir_attr);
if(o_res->rflags & NFS4_OPEN_RESULT_CONFIRM) {
status = _nfs4_proc_open_confirm(server->client, &o_res->fh,
- sp, &o_res->stateid);
+ sp, &o_res->stateid, o_arg->seqid);
if (status != 0)
goto out;
}
+ nfs_confirm_seqid(&sp->so_seqid, 0);
if (!(o_res->f_attr->valid & NFS_ATTR_FATTR))
status = server->rpc_ops->getattr(server, &o_res->fh, o_res->f_attr);
out:
@@ -441,9 +501,7 @@
struct inode *inode = state->inode;
struct nfs_server *server = NFS_SERVER(dir);
struct nfs_delegation *delegation = NFS_I(inode)->delegation;
- struct nfs_fattr f_attr = {
- .valid = 0,
- };
+ struct nfs_fattr f_attr, dir_attr;
struct nfs_openargs o_arg = {
.fh = NFS_FH(dir),
.open_flags = state->state,
@@ -453,6 +511,7 @@
};
struct nfs_openres o_res = {
.f_attr = &f_attr,
+ .dir_attr = &dir_attr,
.server = server,
};
int status = 0;
@@ -465,6 +524,12 @@
set_bit(NFS_DELEGATED_STATE, &state->flags);
goto out;
}
+ o_arg.seqid = nfs_alloc_seqid(&sp->so_seqid);
+ status = -ENOMEM;
+ if (o_arg.seqid == NULL)
+ goto out;
+ nfs_fattr_init(&f_attr);
+ nfs_fattr_init(&dir_attr);
status = _nfs4_proc_open(dir, sp, &o_arg, &o_res);
if (status != 0)
goto out_nodeleg;
@@ -490,6 +555,7 @@
nfs_inode_reclaim_delegation(inode, sp->so_cred, &o_res);
}
out_nodeleg:
+ nfs_free_seqid(o_arg.seqid);
clear_bit(NFS_DELEGATED_STATE, &state->flags);
out:
dput(parent);
@@ -564,7 +630,6 @@
dprintk("%s: nfs4_get_state_owner failed!\n", __FUNCTION__);
goto out_err;
}
- down(&sp->so_sema);
state = nfs4_get_open_state(inode, sp);
if (state == NULL)
goto out_err;
@@ -589,7 +654,6 @@
set_bit(NFS_DELEGATED_STATE, &state->flags);
update_open_stateid(state, &delegation->stateid, open_flags);
out_ok:
- up(&sp->so_sema);
nfs4_put_state_owner(sp);
up_read(&nfsi->rwsem);
up_read(&clp->cl_sem);
@@ -600,11 +664,12 @@
if (sp != NULL) {
if (state != NULL)
nfs4_put_open_state(state);
- up(&sp->so_sema);
nfs4_put_state_owner(sp);
}
up_read(&nfsi->rwsem);
up_read(&clp->cl_sem);
+ if (err != -EACCES)
+ nfs_inode_return_delegation(inode);
return err;
}
@@ -635,9 +700,7 @@
struct nfs4_client *clp = server->nfs4_state;
struct inode *inode = NULL;
int status;
- struct nfs_fattr f_attr = {
- .valid = 0,
- };
+ struct nfs_fattr f_attr, dir_attr;
struct nfs_openargs o_arg = {
.fh = NFS_FH(dir),
.open_flags = flags,
@@ -648,6 +711,7 @@
};
struct nfs_openres o_res = {
.f_attr = &f_attr,
+ .dir_attr = &dir_attr,
.server = server,
};
@@ -665,8 +729,12 @@
} else
o_arg.u.attrs = sattr;
/* Serialization for the sequence id */
- down(&sp->so_sema);
+ o_arg.seqid = nfs_alloc_seqid(&sp->so_seqid);
+ if (o_arg.seqid == NULL)
+ return -ENOMEM;
+ nfs_fattr_init(&f_attr);
+ nfs_fattr_init(&dir_attr);
status = _nfs4_proc_open(dir, sp, &o_arg, &o_res);
if (status != 0)
goto out_err;
@@ -681,7 +749,7 @@
update_open_stateid(state, &o_res.stateid, flags);
if (o_res.delegation_type != 0)
nfs_inode_set_delegation(inode, cred, &o_res);
- up(&sp->so_sema);
+ nfs_free_seqid(o_arg.seqid);
nfs4_put_state_owner(sp);
up_read(&clp->cl_sem);
*res = state;
@@ -690,7 +758,7 @@
if (sp != NULL) {
if (state != NULL)
nfs4_put_open_state(state);
- up(&sp->so_sema);
+ nfs_free_seqid(o_arg.seqid);
nfs4_put_state_owner(sp);
}
/* Note: clp->cl_sem must be released before nfs4_put_open_state()! */
@@ -718,7 +786,7 @@
* It is actually a sign of a bug on the client or on the server.
*
* If we receive a BAD_SEQID error in the particular case of
- * doing an OPEN, we assume that nfs4_increment_seqid() will
+ * doing an OPEN, we assume that nfs_increment_open_seqid() will
* have unhashed the old state_owner for us, and that we can
* therefore safely retry using a new one. We should still warn
* the user though...
@@ -728,6 +796,16 @@
exception.retry = 1;
continue;
}
+ /*
+ * BAD_STATEID on OPEN means that the server cancelled our
+ * state before it received the OPEN_CONFIRM.
+ * Recover by retrying the request as per the discussion
+ * on Page 181 of RFC3530.
+ */
+ if (status == -NFS4ERR_BAD_STATEID) {
+ exception.retry = 1;
+ continue;
+ }
res = ERR_PTR(nfs4_handle_exception(NFS_SERVER(dir),
status, &exception));
} while (exception.retry);
@@ -755,7 +833,7 @@
};
int status;
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
if (state != NULL) {
msg.rpc_cred = state->owner->so_cred;
@@ -787,19 +865,30 @@
struct nfs4_state *state;
struct nfs_closeargs arg;
struct nfs_closeres res;
+ struct nfs_fattr fattr;
};
+static void nfs4_free_closedata(struct nfs4_closedata *calldata)
+{
+ struct nfs4_state *state = calldata->state;
+ struct nfs4_state_owner *sp = state->owner;
+
+ nfs4_put_open_state(calldata->state);
+ nfs_free_seqid(calldata->arg.seqid);
+ nfs4_put_state_owner(sp);
+ kfree(calldata);
+}
+
static void nfs4_close_done(struct rpc_task *task)
{
struct nfs4_closedata *calldata = (struct nfs4_closedata *)task->tk_calldata;
struct nfs4_state *state = calldata->state;
- struct nfs4_state_owner *sp = state->owner;
struct nfs_server *server = NFS_SERVER(calldata->inode);
/* hmm. we are done with the inode, and in the process of freeing
* the state_owner. we keep this around to process errors
*/
- nfs4_increment_seqid(task->tk_status, sp);
+ nfs_increment_open_seqid(task->tk_status, calldata->arg.seqid);
switch (task->tk_status) {
case 0:
memcpy(&state->stateid, &calldata->res.stateid,
@@ -816,25 +905,49 @@
return;
}
}
+ nfs_refresh_inode(calldata->inode, calldata->res.fattr);
state->state = calldata->arg.open_flags;
- nfs4_put_open_state(state);
- up(&sp->so_sema);
- nfs4_put_state_owner(sp);
- up_read(&server->nfs4_state->cl_sem);
- kfree(calldata);
+ nfs4_free_closedata(calldata);
}
-static inline int nfs4_close_call(struct rpc_clnt *clnt, struct nfs4_closedata *calldata)
+static void nfs4_close_begin(struct rpc_task *task)
{
+ struct nfs4_closedata *calldata = (struct nfs4_closedata *)task->tk_calldata;
+ struct nfs4_state *state = calldata->state;
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_CLOSE],
.rpc_argp = &calldata->arg,
.rpc_resp = &calldata->res,
- .rpc_cred = calldata->state->owner->so_cred,
+ .rpc_cred = state->owner->so_cred,
};
- if (calldata->arg.open_flags != 0)
+ int mode = 0;
+ int status;
+
+ status = nfs_wait_on_sequence(calldata->arg.seqid, task);
+ if (status != 0)
+ return;
+ /* Don't reorder reads */
+ smp_rmb();
+ /* Recalculate the new open mode in case someone reopened the file
+ * while we were waiting in line to be scheduled.
+ */
+ if (state->nreaders != 0)
+ mode |= FMODE_READ;
+ if (state->nwriters != 0)
+ mode |= FMODE_WRITE;
+ if (test_bit(NFS_DELEGATED_STATE, &state->flags))
+ state->state = mode;
+ if (mode == state->state) {
+ nfs4_free_closedata(calldata);
+ task->tk_exit = NULL;
+ rpc_exit(task, 0);
+ return;
+ }
+ nfs_fattr_init(calldata->res.fattr);
+ if (mode != 0)
msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_OPEN_DOWNGRADE];
- return rpc_call_async(clnt, &msg, 0, nfs4_close_done, calldata);
+ calldata->arg.open_flags = mode;
+ rpc_call_setup(task, &msg, 0);
}
/*
@@ -850,40 +963,57 @@
*/
int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode)
{
+ struct nfs_server *server = NFS_SERVER(inode);
struct nfs4_closedata *calldata;
- int status;
+ int status = -ENOMEM;
- /* Tell caller we're done */
- if (test_bit(NFS_DELEGATED_STATE, &state->flags)) {
- state->state = mode;
- return 0;
- }
- calldata = (struct nfs4_closedata *)kmalloc(sizeof(*calldata), GFP_KERNEL);
+ calldata = kmalloc(sizeof(*calldata), GFP_KERNEL);
if (calldata == NULL)
- return -ENOMEM;
+ goto out;
calldata->inode = inode;
calldata->state = state;
calldata->arg.fh = NFS_FH(inode);
+ calldata->arg.stateid = &state->stateid;
/* Serialization for the sequence id */
- calldata->arg.seqid = state->owner->so_seqid;
- calldata->arg.open_flags = mode;
- memcpy(&calldata->arg.stateid, &state->stateid,
- sizeof(calldata->arg.stateid));
- status = nfs4_close_call(NFS_SERVER(inode)->client, calldata);
- /*
- * Return -EINPROGRESS on success in order to indicate to the
- * caller that an asynchronous RPC call has been launched, and
- * that it will release the semaphores on completion.
- */
- return (status == 0) ? -EINPROGRESS : status;
+ calldata->arg.seqid = nfs_alloc_seqid(&state->owner->so_seqid);
+ if (calldata->arg.seqid == NULL)
+ goto out_free_calldata;
+ calldata->arg.bitmask = server->attr_bitmask;
+ calldata->res.fattr = &calldata->fattr;
+ calldata->res.server = server;
+
+ status = nfs4_call_async(server->client, nfs4_close_begin,
+ nfs4_close_done, calldata);
+ if (status == 0)
+ goto out;
+
+ nfs_free_seqid(calldata->arg.seqid);
+out_free_calldata:
+ kfree(calldata);
+out:
+ return status;
}
-struct inode *
+static void nfs4_intent_set_file(struct nameidata *nd, struct dentry *dentry, struct nfs4_state *state)
+{
+ struct file *filp;
+
+ filp = lookup_instantiate_filp(nd, dentry, NULL);
+ if (!IS_ERR(filp)) {
+ struct nfs_open_context *ctx;
+ ctx = (struct nfs_open_context *)filp->private_data;
+ ctx->state = state;
+ } else
+ nfs4_close_state(state, nd->intent.open.flags);
+}
+
+struct dentry *
nfs4_atomic_open(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
{
struct iattr attr;
struct rpc_cred *cred;
struct nfs4_state *state;
+ struct dentry *res;
if (nd->flags & LOOKUP_CREATE) {
attr.ia_mode = nd->intent.open.create_mode;
@@ -897,16 +1027,23 @@
cred = rpcauth_lookupcred(NFS_SERVER(dir)->client->cl_auth, 0);
if (IS_ERR(cred))
- return (struct inode *)cred;
+ return (struct dentry *)cred;
state = nfs4_do_open(dir, dentry, nd->intent.open.flags, &attr, cred);
put_rpccred(cred);
- if (IS_ERR(state))
- return (struct inode *)state;
- return state->inode;
+ if (IS_ERR(state)) {
+ if (PTR_ERR(state) == -ENOENT)
+ d_add(dentry, NULL);
+ return (struct dentry *)state;
+ }
+ res = d_add_unique(dentry, state->inode);
+ if (res != NULL)
+ dentry = res;
+ nfs4_intent_set_file(nd, dentry, state);
+ return res;
}
int
-nfs4_open_revalidate(struct inode *dir, struct dentry *dentry, int openflags)
+nfs4_open_revalidate(struct inode *dir, struct dentry *dentry, int openflags, struct nameidata *nd)
{
struct rpc_cred *cred;
struct nfs4_state *state;
@@ -919,18 +1056,30 @@
if (IS_ERR(state))
state = nfs4_do_open(dir, dentry, openflags, NULL, cred);
put_rpccred(cred);
- if (state == ERR_PTR(-ENOENT) && dentry->d_inode == 0)
- return 1;
- if (IS_ERR(state))
- return 0;
+ if (IS_ERR(state)) {
+ switch (PTR_ERR(state)) {
+ case -EPERM:
+ case -EACCES:
+ case -EDQUOT:
+ case -ENOSPC:
+ case -EROFS:
+ lookup_instantiate_filp(nd, (struct dentry *)state, NULL);
+ return 1;
+ case -ENOENT:
+ if (dentry->d_inode == NULL)
+ return 1;
+ }
+ goto out_drop;
+ }
inode = state->inode;
+ iput(inode);
if (inode == dentry->d_inode) {
- iput(inode);
+ nfs4_intent_set_file(nd, dentry, state);
return 1;
}
- d_drop(dentry);
nfs4_close_state(state, openflags);
- iput(inode);
+out_drop:
+ d_drop(dentry);
return 0;
}
@@ -974,13 +1123,12 @@
static int _nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
struct nfs_fsinfo *info)
{
- struct nfs_fattr * fattr = info->fattr;
struct nfs4_lookup_root_arg args = {
.bitmask = nfs4_fattr_bitmap,
};
struct nfs4_lookup_res res = {
.server = server,
- .fattr = fattr,
+ .fattr = info->fattr,
.fh = fhandle,
};
struct rpc_message msg = {
@@ -988,7 +1136,7 @@
.rpc_argp = &args,
.rpc_resp = &res,
};
- fattr->valid = 0;
+ nfs_fattr_init(info->fattr);
return rpc_call_sync(server->client, &msg, 0);
}
@@ -1051,7 +1199,7 @@
q.len = p - q.name;
do {
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = nfs4_handle_exception(server,
rpc_call_sync(server->client, &msg, 0),
&exception);
@@ -1088,7 +1236,7 @@
.rpc_resp = &res,
};
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
return rpc_call_sync(server->client, &msg, 0);
}
@@ -1130,7 +1278,7 @@
struct nfs4_state *state;
int status;
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
cred = rpcauth_lookupcred(NFS_SERVER(inode)->client->cl_auth, 0);
if (IS_ERR(cred))
@@ -1176,7 +1324,7 @@
.rpc_resp = &res,
};
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
dprintk("NFS call lookup %s\n", name->name);
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
@@ -1325,7 +1473,7 @@
dprintk("NFS call read %d @ %Ld\n", rdata->args.count,
(long long) rdata->args.offset);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call_sync(server->client, &msg, flags);
if (!status)
renew_lease(server, timestamp);
@@ -1362,7 +1510,7 @@
dprintk("NFS call write %d @ %Ld\n", wdata->args.count,
(long long) wdata->args.offset);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call_sync(server->client, &msg, rpcflags);
dprintk("NFS reply write: %d\n", status);
return status;
@@ -1396,7 +1544,7 @@
dprintk("NFS call commit %d @ %Ld\n", cdata->args.count,
(long long) cdata->args.offset);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call_sync(server->client, &msg, 0);
dprintk("NFS reply commit: %d\n", status);
return status;
@@ -1431,7 +1579,7 @@
static int
nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
- int flags)
+ int flags, struct nameidata *nd)
{
struct nfs4_state *state;
struct rpc_cred *cred;
@@ -1453,24 +1601,30 @@
struct nfs_fattr fattr;
status = nfs4_do_setattr(NFS_SERVER(dir), &fattr,
NFS_FH(state->inode), sattr, state);
- if (status == 0) {
+ if (status == 0)
nfs_setattr_update_inode(state->inode, sattr);
- goto out;
- }
- } else if (flags != 0)
- goto out;
- nfs4_close_state(state, flags);
+ }
+ if (status == 0 && nd != NULL && (nd->flags & LOOKUP_OPEN))
+ nfs4_intent_set_file(nd, dentry, state);
+ else
+ nfs4_close_state(state, flags);
out:
return status;
}
static int _nfs4_proc_remove(struct inode *dir, struct qstr *name)
{
+ struct nfs_server *server = NFS_SERVER(dir);
struct nfs4_remove_arg args = {
.fh = NFS_FH(dir),
.name = name,
+ .bitmask = server->attr_bitmask,
};
- struct nfs4_change_info res;
+ struct nfs_fattr dir_attr;
+ struct nfs4_remove_res res = {
+ .server = server,
+ .dir_attr = &dir_attr,
+ };
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_REMOVE],
.rpc_argp = &args,
@@ -1478,9 +1632,12 @@
};
int status;
- status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
- if (status == 0)
- update_changeattr(dir, &res);
+ nfs_fattr_init(res.dir_attr);
+ status = rpc_call_sync(server->client, &msg, 0);
+ if (status == 0) {
+ update_changeattr(dir, &res.cinfo);
+ nfs_post_op_update_inode(dir, res.dir_attr);
+ }
return status;
}
@@ -1498,12 +1655,14 @@
struct unlink_desc {
struct nfs4_remove_arg args;
- struct nfs4_change_info res;
+ struct nfs4_remove_res res;
+ struct nfs_fattr dir_attr;
};
static int nfs4_proc_unlink_setup(struct rpc_message *msg, struct dentry *dir,
struct qstr *name)
{
+ struct nfs_server *server = NFS_SERVER(dir->d_inode);
struct unlink_desc *up;
up = (struct unlink_desc *) kmalloc(sizeof(*up), GFP_KERNEL);
@@ -1512,6 +1671,9 @@
up->args.fh = NFS_FH(dir->d_inode);
up->args.name = name;
+ up->args.bitmask = server->attr_bitmask;
+ up->res.server = server;
+ up->res.dir_attr = &up->dir_attr;
msg->rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_REMOVE];
msg->rpc_argp = &up->args;
@@ -1526,7 +1688,8 @@
if (msg->rpc_resp != NULL) {
up = container_of(msg->rpc_resp, struct unlink_desc, res);
- update_changeattr(dir->d_inode, &up->res);
+ update_changeattr(dir->d_inode, &up->res.cinfo);
+ nfs_post_op_update_inode(dir->d_inode, up->res.dir_attr);
kfree(up);
msg->rpc_resp = NULL;
msg->rpc_argp = NULL;
@@ -1537,13 +1700,20 @@
static int _nfs4_proc_rename(struct inode *old_dir, struct qstr *old_name,
struct inode *new_dir, struct qstr *new_name)
{
+ struct nfs_server *server = NFS_SERVER(old_dir);
struct nfs4_rename_arg arg = {
.old_dir = NFS_FH(old_dir),
.new_dir = NFS_FH(new_dir),
.old_name = old_name,
.new_name = new_name,
+ .bitmask = server->attr_bitmask,
};
- struct nfs4_rename_res res = { };
+ struct nfs_fattr old_fattr, new_fattr;
+ struct nfs4_rename_res res = {
+ .server = server,
+ .old_fattr = &old_fattr,
+ .new_fattr = &new_fattr,
+ };
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENAME],
.rpc_argp = &arg,
@@ -1551,11 +1721,15 @@
};
int status;
- status = rpc_call_sync(NFS_CLIENT(old_dir), &msg, 0);
+ nfs_fattr_init(res.old_fattr);
+ nfs_fattr_init(res.new_fattr);
+ status = rpc_call_sync(server->client, &msg, 0);
if (!status) {
update_changeattr(old_dir, &res.old_cinfo);
+ nfs_post_op_update_inode(old_dir, res.old_fattr);
update_changeattr(new_dir, &res.new_cinfo);
+ nfs_post_op_update_inode(new_dir, res.new_fattr);
}
return status;
}
@@ -1576,22 +1750,34 @@
static int _nfs4_proc_link(struct inode *inode, struct inode *dir, struct qstr *name)
{
+ struct nfs_server *server = NFS_SERVER(inode);
struct nfs4_link_arg arg = {
.fh = NFS_FH(inode),
.dir_fh = NFS_FH(dir),
.name = name,
+ .bitmask = server->attr_bitmask,
};
- struct nfs4_change_info cinfo = { };
+ struct nfs_fattr fattr, dir_attr;
+ struct nfs4_link_res res = {
+ .server = server,
+ .fattr = &fattr,
+ .dir_attr = &dir_attr,
+ };
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LINK],
.rpc_argp = &arg,
- .rpc_resp = &cinfo,
+ .rpc_resp = &res,
};
int status;
- status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
- if (!status)
- update_changeattr(dir, &cinfo);
+ nfs_fattr_init(res.fattr);
+ nfs_fattr_init(res.dir_attr);
+ status = rpc_call_sync(server->client, &msg, 0);
+ if (!status) {
+ update_changeattr(dir, &res.cinfo);
+ nfs_post_op_update_inode(dir, res.dir_attr);
+ nfs_refresh_inode(inode, res.fattr);
+ }
return status;
}
@@ -1613,6 +1799,7 @@
struct nfs_fattr *fattr)
{
struct nfs_server *server = NFS_SERVER(dir);
+ struct nfs_fattr dir_fattr;
struct nfs4_create_arg arg = {
.dir_fh = NFS_FH(dir),
.server = server,
@@ -1625,6 +1812,7 @@
.server = server,
.fh = fhandle,
.fattr = fattr,
+ .dir_fattr = &dir_fattr,
};
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_SYMLINK],
@@ -1636,11 +1824,13 @@
if (path->len > NFS4_MAXPATHLEN)
return -ENAMETOOLONG;
arg.u.symlink = path;
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
+ nfs_fattr_init(&dir_fattr);
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
if (!status)
update_changeattr(dir, &res.dir_cinfo);
+ nfs_post_op_update_inode(dir, res.dir_fattr);
return status;
}
@@ -1664,7 +1854,7 @@
{
struct nfs_server *server = NFS_SERVER(dir);
struct nfs_fh fhandle;
- struct nfs_fattr fattr;
+ struct nfs_fattr fattr, dir_fattr;
struct nfs4_create_arg arg = {
.dir_fh = NFS_FH(dir),
.server = server,
@@ -1677,6 +1867,7 @@
.server = server,
.fh = &fhandle,
.fattr = &fattr,
+ .dir_fattr = &dir_fattr,
};
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_CREATE],
@@ -1685,11 +1876,13 @@
};
int status;
- fattr.valid = 0;
+ nfs_fattr_init(&fattr);
+ nfs_fattr_init(&dir_fattr);
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
if (!status) {
update_changeattr(dir, &res.dir_cinfo);
+ nfs_post_op_update_inode(dir, res.dir_fattr);
status = nfs_instantiate(dentry, &fhandle, &fattr);
}
return status;
@@ -1762,7 +1955,7 @@
{
struct nfs_server *server = NFS_SERVER(dir);
struct nfs_fh fh;
- struct nfs_fattr fattr;
+ struct nfs_fattr fattr, dir_fattr;
struct nfs4_create_arg arg = {
.dir_fh = NFS_FH(dir),
.server = server,
@@ -1774,6 +1967,7 @@
.server = server,
.fh = &fh,
.fattr = &fattr,
+ .dir_fattr = &dir_fattr,
};
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_CREATE],
@@ -1783,7 +1977,8 @@
int status;
int mode = sattr->ia_mode;
- fattr.valid = 0;
+ nfs_fattr_init(&fattr);
+ nfs_fattr_init(&dir_fattr);
BUG_ON(!(sattr->ia_valid & ATTR_MODE));
BUG_ON(!S_ISFIFO(mode) && !S_ISBLK(mode) && !S_ISCHR(mode) && !S_ISSOCK(mode));
@@ -1805,6 +2000,7 @@
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
if (status == 0) {
update_changeattr(dir, &res.dir_cinfo);
+ nfs_post_op_update_inode(dir, res.dir_fattr);
status = nfs_instantiate(dentry, &fh, &fattr);
}
return status;
@@ -1836,7 +2032,7 @@
.rpc_resp = fsstat,
};
- fsstat->fattr->valid = 0;
+ nfs_fattr_init(fsstat->fattr);
return rpc_call_sync(server->client, &msg, 0);
}
@@ -1883,7 +2079,7 @@
static int nfs4_proc_fsinfo(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fsinfo *fsinfo)
{
- fsinfo->fattr->valid = 0;
+ nfs_fattr_init(fsinfo->fattr);
return nfs4_do_fsinfo(server, fhandle, fsinfo);
}
@@ -1906,7 +2102,7 @@
return 0;
}
- pathconf->fattr->valid = 0;
+ nfs_fattr_init(pathconf->fattr);
return rpc_call_sync(server->client, &msg, 0);
}
@@ -1973,8 +2169,10 @@
rpc_restart_call(task);
return;
}
- if (task->tk_status >= 0)
+ if (task->tk_status >= 0) {
renew_lease(NFS_SERVER(inode), data->timestamp);
+ nfs_post_op_update_inode(inode, data->res.fattr);
+ }
/* Call back common NFS writeback processing */
nfs_writeback_done(task);
}
@@ -1990,6 +2188,7 @@
.rpc_cred = data->cred,
};
struct inode *inode = data->inode;
+ struct nfs_server *server = NFS_SERVER(inode);
int stable;
int flags;
@@ -2001,6 +2200,8 @@
} else
stable = NFS_UNSTABLE;
data->args.stable = stable;
+ data->args.bitmask = server->attr_bitmask;
+ data->res.server = server;
data->timestamp = jiffies;
@@ -2022,6 +2223,8 @@
rpc_restart_call(task);
return;
}
+ if (task->tk_status >= 0)
+ nfs_post_op_update_inode(inode, data->res.fattr);
/* Call back common NFS writeback processing */
nfs_commit_done(task);
}
@@ -2037,8 +2240,12 @@
.rpc_cred = data->cred,
};
struct inode *inode = data->inode;
+ struct nfs_server *server = NFS_SERVER(inode);
int flags;
+ data->args.bitmask = server->attr_bitmask;
+ data->res.server = server;
+
/* Set the initial flags for the task. */
flags = (how & FLUSH_SYNC) ? 0 : RPC_TASK_ASYNC;
@@ -2106,65 +2313,6 @@
return 0;
}
-/*
- * We will need to arrange for the VFS layer to provide an atomic open.
- * Until then, this open method is prone to inefficiency and race conditions
- * due to the lookup, potential create, and open VFS calls from sys_open()
- * placed on the wire.
- */
-static int
-nfs4_proc_file_open(struct inode *inode, struct file *filp)
-{
- struct dentry *dentry = filp->f_dentry;
- struct nfs_open_context *ctx;
- struct nfs4_state *state = NULL;
- struct rpc_cred *cred;
- int status = -ENOMEM;
-
- dprintk("nfs4_proc_file_open: starting on (%.*s/%.*s)\n",
- (int)dentry->d_parent->d_name.len,
- dentry->d_parent->d_name.name,
- (int)dentry->d_name.len, dentry->d_name.name);
-
-
- /* Find our open stateid */
- cred = rpcauth_lookupcred(NFS_SERVER(inode)->client->cl_auth, 0);
- if (IS_ERR(cred))
- return PTR_ERR(cred);
- ctx = alloc_nfs_open_context(dentry, cred);
- put_rpccred(cred);
- if (unlikely(ctx == NULL))
- return -ENOMEM;
- status = -EIO; /* ERACE actually */
- state = nfs4_find_state(inode, cred, filp->f_mode);
- if (unlikely(state == NULL))
- goto no_state;
- ctx->state = state;
- nfs4_close_state(state, filp->f_mode);
- ctx->mode = filp->f_mode;
- nfs_file_set_open_context(filp, ctx);
- put_nfs_open_context(ctx);
- if (filp->f_mode & FMODE_WRITE)
- nfs_begin_data_update(inode);
- return 0;
-no_state:
- printk(KERN_WARNING "NFS: v4 raced in function %s\n", __FUNCTION__);
- put_nfs_open_context(ctx);
- return status;
-}
-
-/*
- * Release our state
- */
-static int
-nfs4_proc_file_release(struct inode *inode, struct file *filp)
-{
- if (filp->f_mode & FMODE_WRITE)
- nfs_end_data_update(inode);
- nfs_file_clear_open_context(filp);
- return 0;
-}
-
static inline int nfs4_server_supports_acls(struct nfs_server *server)
{
return (server->caps & NFS_CAP_ACLS)
@@ -2285,7 +2433,7 @@
return -ENOMEM;
args.acl_pages[0] = localpage;
args.acl_pgbase = 0;
- args.acl_len = PAGE_SIZE;
+ resp_len = args.acl_len = PAGE_SIZE;
} else {
resp_buf = buf;
buf_to_pages(buf, buflen, args.acl_pages, &args.acl_pgbase);
@@ -2345,6 +2493,7 @@
if (!nfs4_server_supports_acls(server))
return -EOPNOTSUPP;
+ nfs_inode_return_delegation(inode);
buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
ret = rpc_call_sync(NFS_SERVER(inode)->client, &msg, 0);
if (ret == 0)
@@ -2353,7 +2502,7 @@
}
static int
-nfs4_async_handle_error(struct rpc_task *task, struct nfs_server *server)
+nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server)
{
struct nfs4_client *clp = server->nfs4_state;
@@ -2431,7 +2580,7 @@
/* This is the error handling routine for processes that are allowed
* to sleep.
*/
-int nfs4_handle_exception(struct nfs_server *server, int errorcode, struct nfs4_exception *exception)
+int nfs4_handle_exception(const struct nfs_server *server, int errorcode, struct nfs4_exception *exception)
{
struct nfs4_client *clp = server->nfs4_state;
int ret = errorcode;
@@ -2632,7 +2781,6 @@
down_read(&clp->cl_sem);
nlo.clientid = clp->cl_clientid;
- down(&state->lock_sema);
status = nfs4_set_lock_state(state, request);
if (status != 0)
goto out;
@@ -2659,7 +2807,6 @@
status = 0;
}
out:
- up(&state->lock_sema);
up_read(&clp->cl_sem);
return status;
}
@@ -2696,67 +2843,125 @@
return res;
}
-static int _nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock *request)
+struct nfs4_unlockdata {
+ struct nfs_lockargs arg;
+ struct nfs_locku_opargs luargs;
+ struct nfs_lockres res;
+ struct nfs4_lock_state *lsp;
+ struct nfs_open_context *ctx;
+ atomic_t refcount;
+ struct completion completion;
+};
+
+static void nfs4_locku_release_calldata(struct nfs4_unlockdata *calldata)
{
- struct inode *inode = state->inode;
- struct nfs_server *server = NFS_SERVER(inode);
- struct nfs4_client *clp = server->nfs4_state;
- struct nfs_lockargs arg = {
- .fh = NFS_FH(inode),
- .type = nfs4_lck_type(cmd, request),
- .offset = request->fl_start,
- .length = nfs4_lck_length(request),
- };
- struct nfs_lockres res = {
- .server = server,
- };
+ if (atomic_dec_and_test(&calldata->refcount)) {
+ nfs_free_seqid(calldata->luargs.seqid);
+ nfs4_put_lock_state(calldata->lsp);
+ put_nfs_open_context(calldata->ctx);
+ kfree(calldata);
+ }
+}
+
+static void nfs4_locku_complete(struct nfs4_unlockdata *calldata)
+{
+ complete(&calldata->completion);
+ nfs4_locku_release_calldata(calldata);
+}
+
+static void nfs4_locku_done(struct rpc_task *task)
+{
+ struct nfs4_unlockdata *calldata = (struct nfs4_unlockdata *)task->tk_calldata;
+
+ nfs_increment_lock_seqid(task->tk_status, calldata->luargs.seqid);
+ switch (task->tk_status) {
+ case 0:
+ memcpy(calldata->lsp->ls_stateid.data,
+ calldata->res.u.stateid.data,
+ sizeof(calldata->lsp->ls_stateid.data));
+ break;
+ case -NFS4ERR_STALE_STATEID:
+ case -NFS4ERR_EXPIRED:
+ nfs4_schedule_state_recovery(calldata->res.server->nfs4_state);
+ break;
+ default:
+ if (nfs4_async_handle_error(task, calldata->res.server) == -EAGAIN) {
+ rpc_restart_call(task);
+ return;
+ }
+ }
+ nfs4_locku_complete(calldata);
+}
+
+static void nfs4_locku_begin(struct rpc_task *task)
+{
+ struct nfs4_unlockdata *calldata = (struct nfs4_unlockdata *)task->tk_calldata;
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LOCKU],
- .rpc_argp = &arg,
- .rpc_resp = &res,
- .rpc_cred = state->owner->so_cred,
+ .rpc_argp = &calldata->arg,
+ .rpc_resp = &calldata->res,
+ .rpc_cred = calldata->lsp->ls_state->owner->so_cred,
};
- struct nfs4_lock_state *lsp;
- struct nfs_locku_opargs luargs;
int status;
-
- down_read(&clp->cl_sem);
- down(&state->lock_sema);
- status = nfs4_set_lock_state(state, request);
- if (status != 0)
- goto out;
- lsp = request->fl_u.nfs4_fl.owner;
- /* We might have lost the locks! */
- if ((lsp->ls_flags & NFS_LOCK_INITIALIZED) == 0)
- goto out;
- luargs.seqid = lsp->ls_seqid;
- memcpy(&luargs.stateid, &lsp->ls_stateid, sizeof(luargs.stateid));
- arg.u.locku = &luargs;
- status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR);
- nfs4_increment_lock_seqid(status, lsp);
- if (status == 0)
- memcpy(&lsp->ls_stateid, &res.u.stateid,
- sizeof(lsp->ls_stateid));
-out:
- up(&state->lock_sema);
- if (status == 0)
- do_vfs_lock(request->fl_file, request);
- up_read(&clp->cl_sem);
- return status;
+ status = nfs_wait_on_sequence(calldata->luargs.seqid, task);
+ if (status != 0)
+ return;
+ if ((calldata->lsp->ls_flags & NFS_LOCK_INITIALIZED) == 0) {
+ nfs4_locku_complete(calldata);
+ task->tk_exit = NULL;
+ rpc_exit(task, 0);
+ return;
+ }
+ rpc_call_setup(task, &msg, 0);
}
static int nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock *request)
{
- struct nfs4_exception exception = { };
- int err;
+ struct nfs4_unlockdata *calldata;
+ struct inode *inode = state->inode;
+ struct nfs_server *server = NFS_SERVER(inode);
+ struct nfs4_lock_state *lsp;
+ int status;
- do {
- err = nfs4_handle_exception(NFS_SERVER(state->inode),
- _nfs4_proc_unlck(state, cmd, request),
- &exception);
- } while (exception.retry);
- return err;
+ status = nfs4_set_lock_state(state, request);
+ if (status != 0)
+ return status;
+ lsp = request->fl_u.nfs4_fl.owner;
+ /* We might have lost the locks! */
+ if ((lsp->ls_flags & NFS_LOCK_INITIALIZED) == 0)
+ return 0;
+ calldata = kmalloc(sizeof(*calldata), GFP_KERNEL);
+ if (calldata == NULL)
+ return -ENOMEM;
+ calldata->luargs.seqid = nfs_alloc_seqid(&lsp->ls_seqid);
+ if (calldata->luargs.seqid == NULL) {
+ kfree(calldata);
+ return -ENOMEM;
+ }
+ calldata->luargs.stateid = &lsp->ls_stateid;
+ calldata->arg.fh = NFS_FH(inode);
+ calldata->arg.type = nfs4_lck_type(cmd, request);
+ calldata->arg.offset = request->fl_start;
+ calldata->arg.length = nfs4_lck_length(request);
+ calldata->arg.u.locku = &calldata->luargs;
+ calldata->res.server = server;
+ calldata->lsp = lsp;
+ atomic_inc(&lsp->ls_count);
+
+ /* Ensure we don't close file until we're done freeing locks! */
+ calldata->ctx = get_nfs_open_context((struct nfs_open_context*)request->fl_file->private_data);
+
+ atomic_set(&calldata->refcount, 2);
+ init_completion(&calldata->completion);
+
+ status = nfs4_call_async(NFS_SERVER(inode)->client, nfs4_locku_begin,
+ nfs4_locku_done, calldata);
+ if (status == 0)
+ wait_for_completion_interruptible(&calldata->completion);
+ do_vfs_lock(request->fl_file, request);
+ nfs4_locku_release_calldata(calldata);
+ return status;
}
static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *request, int reclaim)
@@ -2764,11 +2969,23 @@
struct inode *inode = state->inode;
struct nfs_server *server = NFS_SERVER(inode);
struct nfs4_lock_state *lsp = request->fl_u.nfs4_fl.owner;
+ struct nfs_lock_opargs largs = {
+ .lock_stateid = &lsp->ls_stateid,
+ .open_stateid = &state->stateid,
+ .lock_owner = {
+ .clientid = server->nfs4_state->cl_clientid,
+ .id = lsp->ls_id,
+ },
+ .reclaim = reclaim,
+ };
struct nfs_lockargs arg = {
.fh = NFS_FH(inode),
.type = nfs4_lck_type(cmd, request),
.offset = request->fl_start,
.length = nfs4_lck_length(request),
+ .u = {
+ .lock = &largs,
+ },
};
struct nfs_lockres res = {
.server = server,
@@ -2779,53 +2996,39 @@
.rpc_resp = &res,
.rpc_cred = state->owner->so_cred,
};
- struct nfs_lock_opargs largs = {
- .reclaim = reclaim,
- .new_lock_owner = 0,
- };
- int status;
+ int status = -ENOMEM;
- if (!(lsp->ls_flags & NFS_LOCK_INITIALIZED)) {
+ largs.lock_seqid = nfs_alloc_seqid(&lsp->ls_seqid);
+ if (largs.lock_seqid == NULL)
+ return -ENOMEM;
+ if (!(lsp->ls_seqid.flags & NFS_SEQID_CONFIRMED)) {
struct nfs4_state_owner *owner = state->owner;
- struct nfs_open_to_lock otl = {
- .lock_owner = {
- .clientid = server->nfs4_state->cl_clientid,
- },
- };
- otl.lock_seqid = lsp->ls_seqid;
- otl.lock_owner.id = lsp->ls_id;
- memcpy(&otl.open_stateid, &state->stateid, sizeof(otl.open_stateid));
- largs.u.open_lock = &otl;
+ largs.open_seqid = nfs_alloc_seqid(&owner->so_seqid);
+ if (largs.open_seqid == NULL)
+ goto out;
largs.new_lock_owner = 1;
- arg.u.lock = &largs;
- down(&owner->so_sema);
- otl.open_seqid = owner->so_seqid;
status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR);
- /* increment open_owner seqid on success, and
- * seqid mutating errors */
- nfs4_increment_seqid(status, owner);
- up(&owner->so_sema);
- if (status == 0) {
- lsp->ls_flags |= NFS_LOCK_INITIALIZED;
- lsp->ls_seqid++;
+ /* increment open seqid on success, and seqid mutating errors */
+ if (largs.new_lock_owner != 0) {
+ nfs_increment_open_seqid(status, largs.open_seqid);
+ if (status == 0)
+ nfs_confirm_seqid(&lsp->ls_seqid, 0);
}
- } else {
- struct nfs_exist_lock el = {
- .seqid = lsp->ls_seqid,
- };
- memcpy(&el.stateid, &lsp->ls_stateid, sizeof(el.stateid));
- largs.u.exist_lock = ⪙
- arg.u.lock = &largs;
+ nfs_free_seqid(largs.open_seqid);
+ } else
status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR);
- /* increment seqid on success, and * seqid mutating errors*/
- nfs4_increment_lock_seqid(status, lsp);
- }
+ /* increment lock seqid on success, and seqid mutating errors*/
+ nfs_increment_lock_seqid(status, largs.lock_seqid);
/* save the returned stateid. */
- if (status == 0)
- memcpy(&lsp->ls_stateid, &res.u.stateid, sizeof(nfs4_stateid));
- else if (status == -NFS4ERR_DENIED)
+ if (status == 0) {
+ memcpy(lsp->ls_stateid.data, res.u.stateid.data,
+ sizeof(lsp->ls_stateid.data));
+ lsp->ls_flags |= NFS_LOCK_INITIALIZED;
+ } else if (status == -NFS4ERR_DENIED)
status = -EAGAIN;
+out:
+ nfs_free_seqid(largs.lock_seqid);
return status;
}
@@ -2865,11 +3068,9 @@
int status;
down_read(&clp->cl_sem);
- down(&state->lock_sema);
status = nfs4_set_lock_state(state, request);
if (status == 0)
status = _nfs4_do_setlk(state, cmd, request, 0);
- up(&state->lock_sema);
if (status == 0) {
/* Note: we always want to sleep here! */
request->fl_flags |= FL_SLEEP;
@@ -3024,8 +3225,8 @@
.read_setup = nfs4_proc_read_setup,
.write_setup = nfs4_proc_write_setup,
.commit_setup = nfs4_proc_commit_setup,
- .file_open = nfs4_proc_file_open,
- .file_release = nfs4_proc_file_release,
+ .file_open = nfs_open,
+ .file_release = nfs_release,
.lock = nfs4_proc_lock,
.clear_acl_cache = nfs4_zap_acl_attr,
};
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index afe587d..2d5a6a2 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -264,13 +264,16 @@
{
struct nfs4_state_owner *sp;
- sp = kmalloc(sizeof(*sp),GFP_KERNEL);
+ sp = kzalloc(sizeof(*sp),GFP_KERNEL);
if (!sp)
return NULL;
- init_MUTEX(&sp->so_sema);
- sp->so_seqid = 0; /* arbitrary */
+ spin_lock_init(&sp->so_lock);
INIT_LIST_HEAD(&sp->so_states);
INIT_LIST_HEAD(&sp->so_delegations);
+ rpc_init_wait_queue(&sp->so_sequence.wait, "Seqid_waitqueue");
+ sp->so_seqid.sequence = &sp->so_sequence;
+ spin_lock_init(&sp->so_sequence.lock);
+ INIT_LIST_HEAD(&sp->so_sequence.list);
atomic_set(&sp->so_count, 1);
return sp;
}
@@ -359,7 +362,6 @@
memset(state->stateid.data, 0, sizeof(state->stateid.data));
atomic_set(&state->count, 1);
INIT_LIST_HEAD(&state->lock_states);
- init_MUTEX(&state->lock_sema);
spin_lock_init(&state->state_lock);
return state;
}
@@ -437,21 +439,23 @@
if (state)
goto out;
new = nfs4_alloc_open_state();
+ spin_lock(&owner->so_lock);
spin_lock(&inode->i_lock);
state = __nfs4_find_state_byowner(inode, owner);
if (state == NULL && new != NULL) {
state = new;
- /* Caller *must* be holding owner->so_sem */
- /* Note: The reclaim code dictates that we add stateless
- * and read-only stateids to the end of the list */
- list_add_tail(&state->open_states, &owner->so_states);
state->owner = owner;
atomic_inc(&owner->so_count);
list_add(&state->inode_states, &nfsi->open_states);
state->inode = igrab(inode);
spin_unlock(&inode->i_lock);
+ /* Note: The reclaim code dictates that we add stateless
+ * and read-only stateids to the end of the list */
+ list_add_tail(&state->open_states, &owner->so_states);
+ spin_unlock(&owner->so_lock);
} else {
spin_unlock(&inode->i_lock);
+ spin_unlock(&owner->so_lock);
if (new)
nfs4_free_open_state(new);
}
@@ -461,19 +465,21 @@
/*
* Beware! Caller must be holding exactly one
- * reference to clp->cl_sem and owner->so_sema!
+ * reference to clp->cl_sem!
*/
void nfs4_put_open_state(struct nfs4_state *state)
{
struct inode *inode = state->inode;
struct nfs4_state_owner *owner = state->owner;
- if (!atomic_dec_and_lock(&state->count, &inode->i_lock))
+ if (!atomic_dec_and_lock(&state->count, &owner->so_lock))
return;
+ spin_lock(&inode->i_lock);
if (!list_empty(&state->inode_states))
list_del(&state->inode_states);
- spin_unlock(&inode->i_lock);
list_del(&state->open_states);
+ spin_unlock(&inode->i_lock);
+ spin_unlock(&owner->so_lock);
iput(inode);
BUG_ON (state->state != 0);
nfs4_free_open_state(state);
@@ -481,20 +487,17 @@
}
/*
- * Beware! Caller must be holding no references to clp->cl_sem!
- * of owner->so_sema!
+ * Close the current file.
*/
void nfs4_close_state(struct nfs4_state *state, mode_t mode)
{
struct inode *inode = state->inode;
struct nfs4_state_owner *owner = state->owner;
- struct nfs4_client *clp = owner->so_client;
int newstate;
atomic_inc(&owner->so_count);
- down_read(&clp->cl_sem);
- down(&owner->so_sema);
/* Protect against nfs4_find_state() */
+ spin_lock(&owner->so_lock);
spin_lock(&inode->i_lock);
if (mode & FMODE_READ)
state->nreaders--;
@@ -507,6 +510,7 @@
list_move_tail(&state->open_states, &owner->so_states);
}
spin_unlock(&inode->i_lock);
+ spin_unlock(&owner->so_lock);
newstate = 0;
if (state->state != 0) {
if (state->nreaders)
@@ -515,14 +519,16 @@
newstate |= FMODE_WRITE;
if (state->state == newstate)
goto out;
- if (nfs4_do_close(inode, state, newstate) == -EINPROGRESS)
+ if (test_bit(NFS_DELEGATED_STATE, &state->flags)) {
+ state->state = newstate;
+ goto out;
+ }
+ if (nfs4_do_close(inode, state, newstate) == 0)
return;
}
out:
nfs4_put_open_state(state);
- up(&owner->so_sema);
nfs4_put_state_owner(owner);
- up_read(&clp->cl_sem);
}
/*
@@ -546,19 +552,16 @@
* Return a compatible lock_state. If no initialized lock_state structure
* exists, return an uninitialized one.
*
- * The caller must be holding state->lock_sema
*/
static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, fl_owner_t fl_owner)
{
struct nfs4_lock_state *lsp;
struct nfs4_client *clp = state->owner->so_client;
- lsp = kmalloc(sizeof(*lsp), GFP_KERNEL);
+ lsp = kzalloc(sizeof(*lsp), GFP_KERNEL);
if (lsp == NULL)
return NULL;
- lsp->ls_flags = 0;
- lsp->ls_seqid = 0; /* arbitrary */
- memset(lsp->ls_stateid.data, 0, sizeof(lsp->ls_stateid.data));
+ lsp->ls_seqid.sequence = &state->owner->so_sequence;
atomic_set(&lsp->ls_count, 1);
lsp->ls_owner = fl_owner;
spin_lock(&clp->cl_lock);
@@ -572,7 +575,7 @@
* Return a compatible lock_state. If no initialized lock_state structure
* exists, return an uninitialized one.
*
- * The caller must be holding state->lock_sema and clp->cl_sem
+ * The caller must be holding clp->cl_sem
*/
static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_owner_t owner)
{
@@ -605,7 +608,7 @@
* Release reference to lock_state, and free it if we see that
* it is no longer in use
*/
-static void nfs4_put_lock_state(struct nfs4_lock_state *lsp)
+void nfs4_put_lock_state(struct nfs4_lock_state *lsp)
{
struct nfs4_state *state;
@@ -673,29 +676,94 @@
nfs4_put_lock_state(lsp);
}
-/*
-* Called with state->lock_sema and clp->cl_sem held.
-*/
-void nfs4_increment_lock_seqid(int status, struct nfs4_lock_state *lsp)
+struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter)
{
- if (status == NFS_OK || seqid_mutating_err(-status))
- lsp->ls_seqid++;
+ struct nfs_seqid *new;
+
+ new = kmalloc(sizeof(*new), GFP_KERNEL);
+ if (new != NULL) {
+ new->sequence = counter;
+ INIT_LIST_HEAD(&new->list);
+ }
+ return new;
+}
+
+void nfs_free_seqid(struct nfs_seqid *seqid)
+{
+ struct rpc_sequence *sequence = seqid->sequence->sequence;
+
+ if (!list_empty(&seqid->list)) {
+ spin_lock(&sequence->lock);
+ list_del(&seqid->list);
+ spin_unlock(&sequence->lock);
+ }
+ rpc_wake_up_next(&sequence->wait);
+ kfree(seqid);
}
/*
-* Called with sp->so_sema and clp->cl_sem held.
-*
-* Increment the seqid if the OPEN/OPEN_DOWNGRADE/CLOSE succeeded, or
-* failed with a seqid incrementing error -
-* see comments nfs_fs.h:seqid_mutating_error()
-*/
-void nfs4_increment_seqid(int status, struct nfs4_state_owner *sp)
+ * Increment the seqid if the OPEN/OPEN_DOWNGRADE/CLOSE succeeded, or
+ * failed with a seqid incrementing error -
+ * see comments nfs_fs.h:seqid_mutating_error()
+ */
+static inline void nfs_increment_seqid(int status, struct nfs_seqid *seqid)
{
- if (status == NFS_OK || seqid_mutating_err(-status))
- sp->so_seqid++;
- /* If the server returns BAD_SEQID, unhash state_owner here */
- if (status == -NFS4ERR_BAD_SEQID)
+ switch (status) {
+ case 0:
+ break;
+ case -NFS4ERR_BAD_SEQID:
+ case -NFS4ERR_STALE_CLIENTID:
+ case -NFS4ERR_STALE_STATEID:
+ case -NFS4ERR_BAD_STATEID:
+ case -NFS4ERR_BADXDR:
+ case -NFS4ERR_RESOURCE:
+ case -NFS4ERR_NOFILEHANDLE:
+ /* Non-seqid mutating errors */
+ return;
+ };
+ /*
+ * Note: no locking needed as we are guaranteed to be first
+ * on the sequence list
+ */
+ seqid->sequence->counter++;
+}
+
+void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid)
+{
+ if (status == -NFS4ERR_BAD_SEQID) {
+ struct nfs4_state_owner *sp = container_of(seqid->sequence,
+ struct nfs4_state_owner, so_seqid);
nfs4_drop_state_owner(sp);
+ }
+ return nfs_increment_seqid(status, seqid);
+}
+
+/*
+ * Increment the seqid if the LOCK/LOCKU succeeded, or
+ * failed with a seqid incrementing error -
+ * see comments nfs_fs.h:seqid_mutating_error()
+ */
+void nfs_increment_lock_seqid(int status, struct nfs_seqid *seqid)
+{
+ return nfs_increment_seqid(status, seqid);
+}
+
+int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task)
+{
+ struct rpc_sequence *sequence = seqid->sequence->sequence;
+ int status = 0;
+
+ if (sequence->list.next == &seqid->list)
+ goto out;
+ spin_lock(&sequence->lock);
+ if (!list_empty(&sequence->list)) {
+ rpc_sleep_on(&sequence->wait, task, NULL, NULL);
+ status = -EAGAIN;
+ } else
+ list_add(&seqid->list, &sequence->list);
+ spin_unlock(&sequence->lock);
+out:
+ return status;
}
static int reclaimer(void *);
@@ -791,8 +859,6 @@
if (state->state == 0)
continue;
status = ops->recover_open(sp, state);
- list_for_each_entry(lock, &state->lock_states, ls_locks)
- lock->ls_flags &= ~NFS_LOCK_INITIALIZED;
if (status >= 0) {
status = nfs4_reclaim_locks(ops, state);
if (status < 0)
@@ -831,6 +897,28 @@
return status;
}
+static void nfs4_state_mark_reclaim(struct nfs4_client *clp)
+{
+ struct nfs4_state_owner *sp;
+ struct nfs4_state *state;
+ struct nfs4_lock_state *lock;
+
+ /* Reset all sequence ids to zero */
+ list_for_each_entry(sp, &clp->cl_state_owners, so_list) {
+ sp->so_seqid.counter = 0;
+ sp->so_seqid.flags = 0;
+ spin_lock(&sp->so_lock);
+ list_for_each_entry(state, &sp->so_states, open_states) {
+ list_for_each_entry(lock, &state->lock_states, ls_locks) {
+ lock->ls_seqid.counter = 0;
+ lock->ls_seqid.flags = 0;
+ lock->ls_flags &= ~NFS_LOCK_INITIALIZED;
+ }
+ }
+ spin_unlock(&sp->so_lock);
+ }
+}
+
static int reclaimer(void *ptr)
{
struct reclaimer_args *args = (struct reclaimer_args *)ptr;
@@ -864,6 +952,7 @@
default:
ops = &nfs4_network_partition_recovery_ops;
};
+ nfs4_state_mark_reclaim(clp);
status = __nfs4_init_client(clp);
if (status)
goto out_error;
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 6c564ef..fbbace8 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -95,6 +95,8 @@
#define decode_getattr_maxsz (op_decode_hdr_maxsz + nfs4_fattr_maxsz)
#define encode_savefh_maxsz (op_encode_hdr_maxsz)
#define decode_savefh_maxsz (op_decode_hdr_maxsz)
+#define encode_restorefh_maxsz (op_encode_hdr_maxsz)
+#define decode_restorefh_maxsz (op_decode_hdr_maxsz)
#define encode_fsinfo_maxsz (op_encode_hdr_maxsz + 2)
#define decode_fsinfo_maxsz (op_decode_hdr_maxsz + 11)
#define encode_renew_maxsz (op_encode_hdr_maxsz + 3)
@@ -157,16 +159,20 @@
op_decode_hdr_maxsz + 2)
#define NFS4_enc_write_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
- op_encode_hdr_maxsz + 8)
+ op_encode_hdr_maxsz + 8 + \
+ encode_getattr_maxsz)
#define NFS4_dec_write_sz (compound_decode_hdr_maxsz + \
decode_putfh_maxsz + \
- op_decode_hdr_maxsz + 4)
+ op_decode_hdr_maxsz + 4 + \
+ decode_getattr_maxsz)
#define NFS4_enc_commit_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
- op_encode_hdr_maxsz + 3)
+ op_encode_hdr_maxsz + 3 + \
+ encode_getattr_maxsz)
#define NFS4_dec_commit_sz (compound_decode_hdr_maxsz + \
decode_putfh_maxsz + \
- op_decode_hdr_maxsz + 2)
+ op_decode_hdr_maxsz + 2 + \
+ decode_getattr_maxsz)
#define NFS4_enc_open_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
op_encode_hdr_maxsz + \
@@ -196,17 +202,21 @@
#define NFS4_enc_open_downgrade_sz \
(compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
- op_encode_hdr_maxsz + 7)
+ op_encode_hdr_maxsz + 7 + \
+ encode_getattr_maxsz)
#define NFS4_dec_open_downgrade_sz \
(compound_decode_hdr_maxsz + \
decode_putfh_maxsz + \
- op_decode_hdr_maxsz + 4)
+ op_decode_hdr_maxsz + 4 + \
+ decode_getattr_maxsz)
#define NFS4_enc_close_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
- op_encode_hdr_maxsz + 5)
+ op_encode_hdr_maxsz + 5 + \
+ encode_getattr_maxsz)
#define NFS4_dec_close_sz (compound_decode_hdr_maxsz + \
decode_putfh_maxsz + \
- op_decode_hdr_maxsz + 4)
+ op_decode_hdr_maxsz + 4 + \
+ decode_getattr_maxsz)
#define NFS4_enc_setattr_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
op_encode_hdr_maxsz + 4 + \
@@ -300,30 +310,44 @@
decode_getfh_maxsz)
#define NFS4_enc_remove_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
- encode_remove_maxsz)
+ encode_remove_maxsz + \
+ encode_getattr_maxsz)
#define NFS4_dec_remove_sz (compound_decode_hdr_maxsz + \
decode_putfh_maxsz + \
- op_decode_hdr_maxsz + 5)
+ op_decode_hdr_maxsz + 5 + \
+ decode_getattr_maxsz)
#define NFS4_enc_rename_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
encode_savefh_maxsz + \
encode_putfh_maxsz + \
- encode_rename_maxsz)
+ encode_rename_maxsz + \
+ encode_getattr_maxsz + \
+ encode_restorefh_maxsz + \
+ encode_getattr_maxsz)
#define NFS4_dec_rename_sz (compound_decode_hdr_maxsz + \
decode_putfh_maxsz + \
decode_savefh_maxsz + \
decode_putfh_maxsz + \
- decode_rename_maxsz)
+ decode_rename_maxsz + \
+ decode_getattr_maxsz + \
+ decode_restorefh_maxsz + \
+ decode_getattr_maxsz)
#define NFS4_enc_link_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
encode_savefh_maxsz + \
encode_putfh_maxsz + \
- encode_link_maxsz)
+ encode_link_maxsz + \
+ decode_getattr_maxsz + \
+ encode_restorefh_maxsz + \
+ decode_getattr_maxsz)
#define NFS4_dec_link_sz (compound_decode_hdr_maxsz + \
decode_putfh_maxsz + \
decode_savefh_maxsz + \
decode_putfh_maxsz + \
- decode_link_maxsz)
+ decode_link_maxsz + \
+ decode_getattr_maxsz + \
+ decode_restorefh_maxsz + \
+ decode_getattr_maxsz)
#define NFS4_enc_symlink_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
encode_symlink_maxsz + \
@@ -336,14 +360,20 @@
decode_getfh_maxsz)
#define NFS4_enc_create_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
+ encode_savefh_maxsz + \
encode_create_maxsz + \
+ encode_getfh_maxsz + \
encode_getattr_maxsz + \
- encode_getfh_maxsz)
+ encode_restorefh_maxsz + \
+ encode_getattr_maxsz)
#define NFS4_dec_create_sz (compound_decode_hdr_maxsz + \
decode_putfh_maxsz + \
+ decode_savefh_maxsz + \
decode_create_maxsz + \
+ decode_getfh_maxsz + \
decode_getattr_maxsz + \
- decode_getfh_maxsz)
+ decode_restorefh_maxsz + \
+ decode_getattr_maxsz)
#define NFS4_enc_pathconf_sz (compound_encode_hdr_maxsz + \
encode_putfh_maxsz + \
encode_getattr_maxsz)
@@ -602,10 +632,10 @@
{
uint32_t *p;
- RESERVE_SPACE(8+sizeof(arg->stateid.data));
+ RESERVE_SPACE(8+sizeof(arg->stateid->data));
WRITE32(OP_CLOSE);
- WRITE32(arg->seqid);
- WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data));
+ WRITE32(arg->seqid->sequence->counter);
+ WRITEMEM(arg->stateid->data, sizeof(arg->stateid->data));
return 0;
}
@@ -729,22 +759,18 @@
WRITE64(arg->length);
WRITE32(opargs->new_lock_owner);
if (opargs->new_lock_owner){
- struct nfs_open_to_lock *ol = opargs->u.open_lock;
-
RESERVE_SPACE(40);
- WRITE32(ol->open_seqid);
- WRITEMEM(&ol->open_stateid, sizeof(ol->open_stateid));
- WRITE32(ol->lock_seqid);
- WRITE64(ol->lock_owner.clientid);
+ WRITE32(opargs->open_seqid->sequence->counter);
+ WRITEMEM(opargs->open_stateid->data, sizeof(opargs->open_stateid->data));
+ WRITE32(opargs->lock_seqid->sequence->counter);
+ WRITE64(opargs->lock_owner.clientid);
WRITE32(4);
- WRITE32(ol->lock_owner.id);
+ WRITE32(opargs->lock_owner.id);
}
else {
- struct nfs_exist_lock *el = opargs->u.exist_lock;
-
RESERVE_SPACE(20);
- WRITEMEM(&el->stateid, sizeof(el->stateid));
- WRITE32(el->seqid);
+ WRITEMEM(opargs->lock_stateid->data, sizeof(opargs->lock_stateid->data));
+ WRITE32(opargs->lock_seqid->sequence->counter);
}
return 0;
@@ -775,8 +801,8 @@
RESERVE_SPACE(44);
WRITE32(OP_LOCKU);
WRITE32(arg->type);
- WRITE32(opargs->seqid);
- WRITEMEM(&opargs->stateid, sizeof(opargs->stateid));
+ WRITE32(opargs->seqid->sequence->counter);
+ WRITEMEM(opargs->stateid->data, sizeof(opargs->stateid->data));
WRITE64(arg->offset);
WRITE64(arg->length);
@@ -826,7 +852,7 @@
*/
RESERVE_SPACE(8);
WRITE32(OP_OPEN);
- WRITE32(arg->seqid);
+ WRITE32(arg->seqid->sequence->counter);
encode_share_access(xdr, arg->open_flags);
RESERVE_SPACE(16);
WRITE64(arg->clientid);
@@ -941,7 +967,7 @@
RESERVE_SPACE(8+sizeof(arg->stateid.data));
WRITE32(OP_OPEN_CONFIRM);
WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data));
- WRITE32(arg->seqid);
+ WRITE32(arg->seqid->sequence->counter);
return 0;
}
@@ -950,10 +976,10 @@
{
uint32_t *p;
- RESERVE_SPACE(8+sizeof(arg->stateid.data));
+ RESERVE_SPACE(8+sizeof(arg->stateid->data));
WRITE32(OP_OPEN_DOWNGRADE);
- WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data));
- WRITE32(arg->seqid);
+ WRITEMEM(arg->stateid->data, sizeof(arg->stateid->data));
+ WRITE32(arg->seqid->sequence->counter);
encode_share_access(xdr, arg->open_flags);
return 0;
}
@@ -1117,6 +1143,17 @@
}
static int
+encode_restorefh(struct xdr_stream *xdr)
+{
+ uint32_t *p;
+
+ RESERVE_SPACE(4);
+ WRITE32(OP_RESTOREFH);
+
+ return 0;
+}
+
+static int
encode_setacl(struct xdr_stream *xdr, struct nfs_setaclargs *arg)
{
uint32_t *p;
@@ -1296,14 +1333,18 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 2,
+ .nops = 3,
};
int status;
xdr_init_encode(&xdr, &req->rq_snd_buf, p);
encode_compound_hdr(&xdr, &hdr);
- if ((status = encode_putfh(&xdr, args->fh)) == 0)
- status = encode_remove(&xdr, args->name);
+ if ((status = encode_putfh(&xdr, args->fh)) != 0)
+ goto out;
+ if ((status = encode_remove(&xdr, args->name)) != 0)
+ goto out;
+ status = encode_getfattr(&xdr, args->bitmask);
+out:
return status;
}
@@ -1314,7 +1355,7 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 4,
+ .nops = 7,
};
int status;
@@ -1326,7 +1367,13 @@
goto out;
if ((status = encode_putfh(&xdr, args->new_dir)) != 0)
goto out;
- status = encode_rename(&xdr, args->old_name, args->new_name);
+ if ((status = encode_rename(&xdr, args->old_name, args->new_name)) != 0)
+ goto out;
+ if ((status = encode_getfattr(&xdr, args->bitmask)) != 0)
+ goto out;
+ if ((status = encode_restorefh(&xdr)) != 0)
+ goto out;
+ status = encode_getfattr(&xdr, args->bitmask);
out:
return status;
}
@@ -1338,7 +1385,7 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 4,
+ .nops = 7,
};
int status;
@@ -1350,7 +1397,13 @@
goto out;
if ((status = encode_putfh(&xdr, args->dir_fh)) != 0)
goto out;
- status = encode_link(&xdr, args->name);
+ if ((status = encode_link(&xdr, args->name)) != 0)
+ goto out;
+ if ((status = encode_getfattr(&xdr, args->bitmask)) != 0)
+ goto out;
+ if ((status = encode_restorefh(&xdr)) != 0)
+ goto out;
+ status = encode_getfattr(&xdr, args->bitmask);
out:
return status;
}
@@ -1362,7 +1415,7 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 4,
+ .nops = 7,
};
int status;
@@ -1370,10 +1423,16 @@
encode_compound_hdr(&xdr, &hdr);
if ((status = encode_putfh(&xdr, args->dir_fh)) != 0)
goto out;
+ if ((status = encode_savefh(&xdr)) != 0)
+ goto out;
if ((status = encode_create(&xdr, args)) != 0)
goto out;
if ((status = encode_getfh(&xdr)) != 0)
goto out;
+ if ((status = encode_getfattr(&xdr, args->bitmask)) != 0)
+ goto out;
+ if ((status = encode_restorefh(&xdr)) != 0)
+ goto out;
status = encode_getfattr(&xdr, args->bitmask);
out:
return status;
@@ -1412,7 +1471,7 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 2,
+ .nops = 3,
};
int status;
@@ -1422,6 +1481,9 @@
if(status)
goto out;
status = encode_close(&xdr, args);
+ if (status != 0)
+ goto out;
+ status = encode_getfattr(&xdr, args->bitmask);
out:
return status;
}
@@ -1433,15 +1495,21 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 4,
+ .nops = 7,
};
int status;
+ status = nfs_wait_on_sequence(args->seqid, req->rq_task);
+ if (status != 0)
+ goto out;
xdr_init_encode(&xdr, &req->rq_snd_buf, p);
encode_compound_hdr(&xdr, &hdr);
status = encode_putfh(&xdr, args->fh);
if (status)
goto out;
+ status = encode_savefh(&xdr);
+ if (status)
+ goto out;
status = encode_open(&xdr, args);
if (status)
goto out;
@@ -1449,6 +1517,12 @@
if (status)
goto out;
status = encode_getfattr(&xdr, args->bitmask);
+ if (status)
+ goto out;
+ status = encode_restorefh(&xdr);
+ if (status)
+ goto out;
+ status = encode_getfattr(&xdr, args->bitmask);
out:
return status;
}
@@ -1464,6 +1538,9 @@
};
int status;
+ status = nfs_wait_on_sequence(args->seqid, req->rq_task);
+ if (status != 0)
+ goto out;
xdr_init_encode(&xdr, &req->rq_snd_buf, p);
encode_compound_hdr(&xdr, &hdr);
status = encode_putfh(&xdr, args->fh);
@@ -1485,6 +1562,9 @@
};
int status;
+ status = nfs_wait_on_sequence(args->seqid, req->rq_task);
+ if (status != 0)
+ goto out;
xdr_init_encode(&xdr, &req->rq_snd_buf, p);
encode_compound_hdr(&xdr, &hdr);
status = encode_putfh(&xdr, args->fh);
@@ -1502,7 +1582,7 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 2,
+ .nops = 3,
};
int status;
@@ -1512,6 +1592,9 @@
if (status)
goto out;
status = encode_open_downgrade(&xdr, args);
+ if (status != 0)
+ goto out;
+ status = encode_getfattr(&xdr, args->bitmask);
out:
return status;
}
@@ -1525,8 +1608,15 @@
struct compound_hdr hdr = {
.nops = 2,
};
+ struct nfs_lock_opargs *opargs = args->u.lock;
int status;
+ status = nfs_wait_on_sequence(opargs->lock_seqid, req->rq_task);
+ if (status != 0)
+ goto out;
+ /* Do we need to do an open_to_lock_owner? */
+ if (opargs->lock_seqid->sequence->flags & NFS_SEQID_CONFIRMED)
+ opargs->new_lock_owner = 0;
xdr_init_encode(&xdr, &req->rq_snd_buf, p);
encode_compound_hdr(&xdr, &hdr);
status = encode_putfh(&xdr, args->fh);
@@ -1713,7 +1803,7 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 2,
+ .nops = 3,
};
int status;
@@ -1723,6 +1813,9 @@
if (status)
goto out;
status = encode_write(&xdr, args);
+ if (status)
+ goto out;
+ status = encode_getfattr(&xdr, args->bitmask);
out:
return status;
}
@@ -1734,7 +1827,7 @@
{
struct xdr_stream xdr;
struct compound_hdr hdr = {
- .nops = 2,
+ .nops = 3,
};
int status;
@@ -1744,6 +1837,9 @@
if (status)
goto out;
status = encode_commit(&xdr, args);
+ if (status)
+ goto out;
+ status = encode_getfattr(&xdr, args->bitmask);
out:
return status;
}
@@ -2670,8 +2766,7 @@
goto xdr_error;
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- if (status != 0)
- printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
return status;
}
@@ -2704,8 +2799,7 @@
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- if (status != 0)
- printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
return status;
}
@@ -2730,8 +2824,7 @@
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- if (status != 0)
- printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
return status;
}
@@ -2787,13 +2880,10 @@
goto xdr_error;
if ((status = decode_attr_time_modify(xdr, bitmap, &fattr->mtime)) != 0)
goto xdr_error;
- if ((status = verify_attr_len(xdr, savep, attrlen)) == 0) {
+ if ((status = verify_attr_len(xdr, savep, attrlen)) == 0)
fattr->valid = NFS_ATTR_FATTR | NFS_ATTR_FATTR_V3 | NFS_ATTR_FATTR_V4;
- fattr->timestamp = jiffies;
- }
xdr_error:
- if (status != 0)
- printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d\n", __FUNCTION__, -status);
return status;
}
@@ -2826,8 +2916,7 @@
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- if (status != 0)
- printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
return status;
}
@@ -2890,8 +2979,8 @@
status = decode_op_hdr(xdr, OP_LOCK);
if (status == 0) {
- READ_BUF(sizeof(nfs4_stateid));
- COPYMEM(&res->u.stateid, sizeof(res->u.stateid));
+ READ_BUF(sizeof(res->u.stateid.data));
+ COPYMEM(res->u.stateid.data, sizeof(res->u.stateid.data));
} else if (status == -NFS4ERR_DENIED)
return decode_lock_denied(xdr, &res->u.denied);
return status;
@@ -2913,8 +3002,8 @@
status = decode_op_hdr(xdr, OP_LOCKU);
if (status == 0) {
- READ_BUF(sizeof(nfs4_stateid));
- COPYMEM(&res->u.stateid, sizeof(res->u.stateid));
+ READ_BUF(sizeof(res->u.stateid.data));
+ COPYMEM(res->u.stateid.data, sizeof(res->u.stateid.data));
}
return status;
}
@@ -2994,7 +3083,7 @@
p += bmlen;
return decode_delegation(xdr, res);
xdr_error:
- printk(KERN_NOTICE "%s: xdr error!\n", __FUNCTION__);
+ dprintk("%s: Bitmap too large! Length = %u\n", __FUNCTION__, bmlen);
return -EIO;
}
@@ -3208,6 +3297,12 @@
return decode_op_hdr(xdr, OP_RENEW);
}
+static int
+decode_restorefh(struct xdr_stream *xdr)
+{
+ return decode_op_hdr(xdr, OP_RESTOREFH);
+}
+
static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req,
size_t *acl_len)
{
@@ -3243,7 +3338,8 @@
if (attrlen <= *acl_len)
xdr_read_pages(xdr, attrlen);
*acl_len = attrlen;
- }
+ } else
+ status = -EOPNOTSUPP;
out:
return status;
@@ -3352,6 +3448,9 @@
if (status)
goto out;
status = decode_open_downgrade(&xdr, res);
+ if (status != 0)
+ goto out;
+ decode_getfattr(&xdr, res->fattr, res->server);
out:
return status;
}
@@ -3424,7 +3523,7 @@
/*
* Decode REMOVE response
*/
-static int nfs4_xdr_dec_remove(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_change_info *cinfo)
+static int nfs4_xdr_dec_remove(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_remove_res *res)
{
struct xdr_stream xdr;
struct compound_hdr hdr;
@@ -3433,8 +3532,11 @@
xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
if ((status = decode_compound_hdr(&xdr, &hdr)) != 0)
goto out;
- if ((status = decode_putfh(&xdr)) == 0)
- status = decode_remove(&xdr, cinfo);
+ if ((status = decode_putfh(&xdr)) != 0)
+ goto out;
+ if ((status = decode_remove(&xdr, &res->cinfo)) != 0)
+ goto out;
+ decode_getfattr(&xdr, res->dir_attr, res->server);
out:
return status;
}
@@ -3457,7 +3559,14 @@
goto out;
if ((status = decode_putfh(&xdr)) != 0)
goto out;
- status = decode_rename(&xdr, &res->old_cinfo, &res->new_cinfo);
+ if ((status = decode_rename(&xdr, &res->old_cinfo, &res->new_cinfo)) != 0)
+ goto out;
+ /* Current FH is target directory */
+ if (decode_getfattr(&xdr, res->new_fattr, res->server) != 0)
+ goto out;
+ if ((status = decode_restorefh(&xdr)) != 0)
+ goto out;
+ decode_getfattr(&xdr, res->old_fattr, res->server);
out:
return status;
}
@@ -3465,7 +3574,7 @@
/*
* Decode LINK response
*/
-static int nfs4_xdr_dec_link(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_change_info *cinfo)
+static int nfs4_xdr_dec_link(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_link_res *res)
{
struct xdr_stream xdr;
struct compound_hdr hdr;
@@ -3480,7 +3589,17 @@
goto out;
if ((status = decode_putfh(&xdr)) != 0)
goto out;
- status = decode_link(&xdr, cinfo);
+ if ((status = decode_link(&xdr, &res->cinfo)) != 0)
+ goto out;
+ /*
+ * Note order: OP_LINK leaves the directory as the current
+ * filehandle.
+ */
+ if (decode_getfattr(&xdr, res->dir_attr, res->server) != 0)
+ goto out;
+ if ((status = decode_restorefh(&xdr)) != 0)
+ goto out;
+ decode_getfattr(&xdr, res->fattr, res->server);
out:
return status;
}
@@ -3499,13 +3618,17 @@
goto out;
if ((status = decode_putfh(&xdr)) != 0)
goto out;
+ if ((status = decode_savefh(&xdr)) != 0)
+ goto out;
if ((status = decode_create(&xdr,&res->dir_cinfo)) != 0)
goto out;
if ((status = decode_getfh(&xdr, res->fh)) != 0)
goto out;
- status = decode_getfattr(&xdr, res->fattr, res->server);
- if (status == NFS4ERR_DELAY)
- status = 0;
+ if (decode_getfattr(&xdr, res->fattr, res->server) != 0)
+ goto out;
+ if ((status = decode_restorefh(&xdr)) != 0)
+ goto out;
+ decode_getfattr(&xdr, res->dir_fattr, res->server);
out:
return status;
}
@@ -3623,6 +3746,15 @@
if (status)
goto out;
status = decode_close(&xdr, res);
+ if (status != 0)
+ goto out;
+ /*
+ * Note: Server may do delete on close for this file
+ * in which case the getattr call will fail with
+ * an ESTALE error. Shouldn't be a problem,
+ * though, since fattr->valid will remain unset.
+ */
+ decode_getfattr(&xdr, res->fattr, res->server);
out:
return status;
}
@@ -3643,15 +3775,20 @@
status = decode_putfh(&xdr);
if (status)
goto out;
+ status = decode_savefh(&xdr);
+ if (status)
+ goto out;
status = decode_open(&xdr, res);
if (status)
goto out;
status = decode_getfh(&xdr, &res->fh);
if (status)
goto out;
- status = decode_getfattr(&xdr, res->f_attr, res->server);
- if (status == NFS4ERR_DELAY)
- status = 0;
+ if (decode_getfattr(&xdr, res->f_attr, res->server) != 0)
+ goto out;
+ if ((status = decode_restorefh(&xdr)) != 0)
+ goto out;
+ decode_getfattr(&xdr, res->dir_attr, res->server);
out:
return status;
}
@@ -3869,6 +4006,9 @@
if (status)
goto out;
status = decode_write(&xdr, res);
+ if (status)
+ goto out;
+ decode_getfattr(&xdr, res->fattr, res->server);
if (!status)
status = res->count;
out:
@@ -3892,6 +4032,9 @@
if (status)
goto out;
status = decode_commit(&xdr, res);
+ if (status)
+ goto out;
+ decode_getfattr(&xdr, res->fattr, res->server);
out:
return status;
}
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index be23c3f..a48a003 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -61,7 +61,7 @@
int status;
dprintk("%s: call getattr\n", __FUNCTION__);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call(server->client_sys, NFSPROC_GETATTR, fhandle, fattr, 0);
dprintk("%s: reply getattr: %d\n", __FUNCTION__, status);
if (status)
@@ -93,7 +93,7 @@
int status;
dprintk("NFS call getattr\n");
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call(server->client, NFSPROC_GETATTR,
fhandle, fattr, 0);
dprintk("NFS reply getattr: %d\n", status);
@@ -112,7 +112,7 @@
int status;
dprintk("NFS call setattr\n");
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call(NFS_CLIENT(inode), NFSPROC_SETATTR, &arg, fattr, 0);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
@@ -136,7 +136,7 @@
int status;
dprintk("NFS call lookup %s\n", name->name);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call(NFS_CLIENT(dir), NFSPROC_LOOKUP, &arg, &res, 0);
dprintk("NFS reply lookup: %d\n", status);
return status;
@@ -174,7 +174,7 @@
dprintk("NFS call read %d @ %Ld\n", rdata->args.count,
(long long) rdata->args.offset);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags);
if (status >= 0) {
nfs_refresh_inode(inode, fattr);
@@ -203,10 +203,10 @@
dprintk("NFS call write %d @ %Ld\n", wdata->args.count,
(long long) wdata->args.offset);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags);
if (status >= 0) {
- nfs_refresh_inode(inode, fattr);
+ nfs_post_op_update_inode(inode, fattr);
wdata->res.count = wdata->args.count;
wdata->verf.committed = NFS_FILE_SYNC;
}
@@ -216,7 +216,7 @@
static int
nfs_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
- int flags)
+ int flags, struct nameidata *nd)
{
struct nfs_fh fhandle;
struct nfs_fattr fattr;
@@ -232,7 +232,7 @@
};
int status;
- fattr.valid = 0;
+ nfs_fattr_init(&fattr);
dprintk("NFS call create %s\n", dentry->d_name.name);
status = rpc_call(NFS_CLIENT(dir), NFSPROC_CREATE, &arg, &res, 0);
if (status == 0)
@@ -273,12 +273,13 @@
sattr->ia_size = new_encode_dev(rdev);/* get out your barf bag */
}
- fattr.valid = 0;
+ nfs_fattr_init(&fattr);
status = rpc_call(NFS_CLIENT(dir), NFSPROC_CREATE, &arg, &res, 0);
+ nfs_mark_for_revalidate(dir);
if (status == -EINVAL && S_ISFIFO(mode)) {
sattr->ia_mode = mode;
- fattr.valid = 0;
+ nfs_fattr_init(&fattr);
status = rpc_call(NFS_CLIENT(dir), NFSPROC_CREATE, &arg, &res, 0);
}
if (status == 0)
@@ -305,6 +306,7 @@
dprintk("NFS call remove %s\n", name->name);
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
+ nfs_mark_for_revalidate(dir);
dprintk("NFS reply remove: %d\n", status);
return status;
@@ -331,8 +333,10 @@
{
struct rpc_message *msg = &task->tk_msg;
- if (msg->rpc_argp)
+ if (msg->rpc_argp) {
+ nfs_mark_for_revalidate(dir->d_inode);
kfree(msg->rpc_argp);
+ }
return 0;
}
@@ -352,6 +356,8 @@
dprintk("NFS call rename %s -> %s\n", old_name->name, new_name->name);
status = rpc_call(NFS_CLIENT(old_dir), NFSPROC_RENAME, &arg, NULL, 0);
+ nfs_mark_for_revalidate(old_dir);
+ nfs_mark_for_revalidate(new_dir);
dprintk("NFS reply rename: %d\n", status);
return status;
}
@@ -369,6 +375,7 @@
dprintk("NFS call link %s\n", name->name);
status = rpc_call(NFS_CLIENT(inode), NFSPROC_LINK, &arg, NULL, 0);
+ nfs_mark_for_revalidate(dir);
dprintk("NFS reply link: %d\n", status);
return status;
}
@@ -391,9 +398,10 @@
if (path->len > NFS2_MAXPATHLEN)
return -ENAMETOOLONG;
dprintk("NFS call symlink %s -> %s\n", name->name, path->name);
- fattr->valid = 0;
+ nfs_fattr_init(fattr);
fhandle->size = 0;
status = rpc_call(NFS_CLIENT(dir), NFSPROC_SYMLINK, &arg, NULL, 0);
+ nfs_mark_for_revalidate(dir);
dprintk("NFS reply symlink: %d\n", status);
return status;
}
@@ -416,8 +424,9 @@
int status;
dprintk("NFS call mkdir %s\n", dentry->d_name.name);
- fattr.valid = 0;
+ nfs_fattr_init(&fattr);
status = rpc_call(NFS_CLIENT(dir), NFSPROC_MKDIR, &arg, &res, 0);
+ nfs_mark_for_revalidate(dir);
if (status == 0)
status = nfs_instantiate(dentry, &fhandle, &fattr);
dprintk("NFS reply mkdir: %d\n", status);
@@ -436,6 +445,7 @@
dprintk("NFS call rmdir %s\n", name->name);
status = rpc_call(NFS_CLIENT(dir), NFSPROC_RMDIR, &arg, NULL, 0);
+ nfs_mark_for_revalidate(dir);
dprintk("NFS reply rmdir: %d\n", status);
return status;
}
@@ -484,7 +494,7 @@
int status;
dprintk("NFS call statfs\n");
- stat->fattr->valid = 0;
+ nfs_fattr_init(stat->fattr);
status = rpc_call(server->client, NFSPROC_STATFS, fhandle, &fsinfo, 0);
dprintk("NFS reply statfs: %d\n", status);
if (status)
@@ -507,7 +517,7 @@
int status;
dprintk("NFS call fsinfo\n");
- info->fattr->valid = 0;
+ nfs_fattr_init(info->fattr);
status = rpc_call(server->client, NFSPROC_STATFS, fhandle, &fsinfo, 0);
dprintk("NFS reply fsinfo: %d\n", status);
if (status)
@@ -579,7 +589,7 @@
struct nfs_write_data *data = (struct nfs_write_data *) task->tk_calldata;
if (task->tk_status >= 0)
- nfs_refresh_inode(data->inode, data->res.fattr);
+ nfs_post_op_update_inode(data->inode, data->res.fattr);
nfs_writeback_done(task);
}
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 9758ebd..43b03b1 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -215,6 +215,7 @@
data->res.fattr = &data->fattr;
data->res.count = count;
data->res.eof = 0;
+ nfs_fattr_init(&data->fattr);
NFS_PROTO(inode)->read_setup(data);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 5130eda..819a65f 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -870,6 +870,7 @@
data->res.fattr = &data->fattr;
data->res.count = count;
data->res.verf = &data->verf;
+ nfs_fattr_init(&data->fattr);
NFS_PROTO(inode)->write_setup(data, how);
@@ -1237,6 +1238,7 @@
data->res.count = 0;
data->res.fattr = &data->fattr;
data->res.verf = &data->verf;
+ nfs_fattr_init(&data->fattr);
NFS_PROTO(inode)->commit_setup(data, how);
diff --git a/fs/open.c b/fs/open.c
index f0d90cf..8d06ec9 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -739,7 +739,8 @@
}
static struct file *__dentry_open(struct dentry *dentry, struct vfsmount *mnt,
- int flags, struct file *f)
+ int flags, struct file *f,
+ int (*open)(struct inode *, struct file *))
{
struct inode *inode;
int error;
@@ -761,11 +762,14 @@
f->f_op = fops_get(inode->i_fop);
file_move(f, &inode->i_sb->s_files);
- if (f->f_op && f->f_op->open) {
- error = f->f_op->open(inode,f);
+ if (!open && f->f_op)
+ open = f->f_op->open;
+ if (open) {
+ error = open(inode, f);
if (error)
goto cleanup_all;
}
+
f->f_flags &= ~(O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC);
file_ra_state_init(&f->f_ra, f->f_mapping->host->i_mapping);
@@ -814,28 +818,75 @@
{
int namei_flags, error;
struct nameidata nd;
- struct file *f;
namei_flags = flags;
if ((namei_flags+1) & O_ACCMODE)
namei_flags++;
- if (namei_flags & O_TRUNC)
- namei_flags |= 2;
-
- error = -ENFILE;
- f = get_empty_filp();
- if (f == NULL)
- return ERR_PTR(error);
error = open_namei(filename, namei_flags, mode, &nd);
if (!error)
- return __dentry_open(nd.dentry, nd.mnt, flags, f);
+ return nameidata_to_filp(&nd, flags);
- put_filp(f);
return ERR_PTR(error);
}
EXPORT_SYMBOL(filp_open);
+/**
+ * lookup_instantiate_filp - instantiates the open intent filp
+ * @nd: pointer to nameidata
+ * @dentry: pointer to dentry
+ * @open: open callback
+ *
+ * Helper for filesystems that want to use lookup open intents and pass back
+ * a fully instantiated struct file to the caller.
+ * This function is meant to be called from within a filesystem's
+ * lookup method.
+ * Note that in case of error, nd->intent.open.file is destroyed, but the
+ * path information remains valid.
+ * If the open callback is set to NULL, then the standard f_op->open()
+ * filesystem callback is substituted.
+ */
+struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
+ int (*open)(struct inode *, struct file *))
+{
+ if (IS_ERR(nd->intent.open.file))
+ goto out;
+ if (IS_ERR(dentry))
+ goto out_err;
+ nd->intent.open.file = __dentry_open(dget(dentry), mntget(nd->mnt),
+ nd->intent.open.flags - 1,
+ nd->intent.open.file,
+ open);
+out:
+ return nd->intent.open.file;
+out_err:
+ release_open_intent(nd);
+ nd->intent.open.file = (struct file *)dentry;
+ goto out;
+}
+EXPORT_SYMBOL_GPL(lookup_instantiate_filp);
+
+/**
+ * nameidata_to_filp - convert a nameidata to an open filp.
+ * @nd: pointer to nameidata
+ * @flags: open flags
+ *
+ * Note that this function destroys the original nameidata
+ */
+struct file *nameidata_to_filp(struct nameidata *nd, int flags)
+{
+ struct file *filp;
+
+ /* Pick up the filp from the open intent */
+ filp = nd->intent.open.file;
+ /* Has the filesystem initialised the file for us? */
+ if (filp->f_dentry == NULL)
+ filp = __dentry_open(nd->dentry, nd->mnt, flags, filp, NULL);
+ else
+ path_release(nd);
+ return filp;
+}
+
struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags)
{
int error;
@@ -846,7 +897,7 @@
if (f == NULL)
return ERR_PTR(error);
- return __dentry_open(dentry, mnt, flags, f);
+ return __dentry_open(dentry, mnt, flags, f, NULL);
}
EXPORT_SYMBOL(dentry_open);
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 77e178f..9c06c54 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -192,6 +192,7 @@
struct part_attribute {
struct attribute attr;
ssize_t (*show)(struct hd_struct *,char *);
+ ssize_t (*store)(struct hd_struct *,const char *, size_t);
};
static ssize_t
@@ -201,14 +202,33 @@
struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr);
ssize_t ret = 0;
if (part_attr->show)
- ret = part_attr->show(p,page);
+ ret = part_attr->show(p, page);
+ return ret;
+}
+static ssize_t
+part_attr_store(struct kobject * kobj, struct attribute * attr,
+ const char *page, size_t count)
+{
+ struct hd_struct * p = container_of(kobj,struct hd_struct,kobj);
+ struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr);
+ ssize_t ret = 0;
+
+ if (part_attr->store)
+ ret = part_attr->store(p, page, count);
return ret;
}
static struct sysfs_ops part_sysfs_ops = {
.show = part_attr_show,
+ .store = part_attr_store,
};
+static ssize_t part_uevent_store(struct hd_struct * p,
+ const char *page, size_t count)
+{
+ kobject_hotplug(&p->kobj, KOBJ_ADD);
+ return count;
+}
static ssize_t part_dev_read(struct hd_struct * p, char *page)
{
struct gendisk *disk = container_of(p->kobj.parent,struct gendisk,kobj);
@@ -229,6 +249,10 @@
p->reads, (unsigned long long)p->read_sectors,
p->writes, (unsigned long long)p->write_sectors);
}
+static struct part_attribute part_attr_uevent = {
+ .attr = {.name = "uevent", .mode = S_IWUSR },
+ .store = part_uevent_store
+};
static struct part_attribute part_attr_dev = {
.attr = {.name = "dev", .mode = S_IRUGO },
.show = part_dev_read
@@ -247,6 +271,7 @@
};
static struct attribute * default_attrs[] = {
+ &part_attr_uevent.attr,
&part_attr_dev.attr,
&part_attr_start.attr,
&part_attr_size.attr,
@@ -430,7 +455,7 @@
disk->flags &= ~GENHD_FL_UP;
unlink_gendisk(disk);
disk_stat_set_all(disk, 0);
- disk->stamp = disk->stamp_idle = 0;
+ disk->stamp = 0;
devfs_remove_disk(disk);
diff --git a/fs/proc/array.c b/fs/proc/array.c
index d84eeca..3e1239e 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -438,7 +438,7 @@
jiffies_to_clock_t(it_real_value),
start_time,
vsize,
- mm ? get_mm_counter(mm, rss) : 0, /* you might want to shift this left 3 */
+ mm ? get_mm_rss(mm) : 0,
rsslim,
mm ? mm->start_code : 0,
mm ? mm->end_code : 0,
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 8a8c344..b638fb5 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -533,7 +533,7 @@
*/
file_list_lock();
list_for_each(p, &sb->s_files) {
- struct file * filp = list_entry(p, struct file, f_list);
+ struct file * filp = list_entry(p, struct file, f_u.fu_list);
struct dentry * dentry = filp->f_dentry;
struct inode * inode;
struct file_operations *fops;
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index effa6c0..e6a818a 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -156,10 +156,13 @@
WARN_ON(de && de->deleted);
+ if (de != NULL && !try_module_get(de->owner))
+ goto out_mod;
+
inode = iget(sb, ino);
if (!inode)
- goto out_fail;
-
+ goto out_ino;
+
PROC_I(inode)->pde = de;
if (de) {
if (de->mode) {
@@ -171,20 +174,20 @@
inode->i_size = de->size;
if (de->nlink)
inode->i_nlink = de->nlink;
- if (!try_module_get(de->owner))
- goto out_fail;
if (de->proc_iops)
inode->i_op = de->proc_iops;
if (de->proc_fops)
inode->i_fop = de->proc_fops;
}
-out:
return inode;
-out_fail:
+out_ino:
+ if (de != NULL)
+ module_put(de->owner);
+out_mod:
de_put(de);
- goto out;
+ return NULL;
}
int proc_fill_super(struct super_block *s, void *data, int silent)
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index c7ef3e4..d2fa420 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -14,22 +14,41 @@
char *task_mem(struct mm_struct *mm, char *buffer)
{
unsigned long data, text, lib;
+ unsigned long hiwater_vm, total_vm, hiwater_rss, total_rss;
+
+ /*
+ * Note: to minimize their overhead, mm maintains hiwater_vm and
+ * hiwater_rss only when about to *lower* total_vm or rss. Any
+ * collector of these hiwater stats must therefore get total_vm
+ * and rss too, which will usually be the higher. Barriers? not
+ * worth the effort, such snapshots can always be inconsistent.
+ */
+ hiwater_vm = total_vm = mm->total_vm;
+ if (hiwater_vm < mm->hiwater_vm)
+ hiwater_vm = mm->hiwater_vm;
+ hiwater_rss = total_rss = get_mm_rss(mm);
+ if (hiwater_rss < mm->hiwater_rss)
+ hiwater_rss = mm->hiwater_rss;
data = mm->total_vm - mm->shared_vm - mm->stack_vm;
text = (PAGE_ALIGN(mm->end_code) - (mm->start_code & PAGE_MASK)) >> 10;
lib = (mm->exec_vm << (PAGE_SHIFT-10)) - text;
buffer += sprintf(buffer,
+ "VmPeak:\t%8lu kB\n"
"VmSize:\t%8lu kB\n"
"VmLck:\t%8lu kB\n"
+ "VmHWM:\t%8lu kB\n"
"VmRSS:\t%8lu kB\n"
"VmData:\t%8lu kB\n"
"VmStk:\t%8lu kB\n"
"VmExe:\t%8lu kB\n"
"VmLib:\t%8lu kB\n"
"VmPTE:\t%8lu kB\n",
- (mm->total_vm - mm->reserved_vm) << (PAGE_SHIFT-10),
+ hiwater_vm << (PAGE_SHIFT-10),
+ (total_vm - mm->reserved_vm) << (PAGE_SHIFT-10),
mm->locked_vm << (PAGE_SHIFT-10),
- get_mm_counter(mm, rss) << (PAGE_SHIFT-10),
+ hiwater_rss << (PAGE_SHIFT-10),
+ total_rss << (PAGE_SHIFT-10),
data << (PAGE_SHIFT-10),
mm->stack_vm << (PAGE_SHIFT-10), text, lib,
(PTRS_PER_PTE*sizeof(pte_t)*mm->nr_ptes) >> 10);
@@ -44,13 +63,11 @@
int task_statm(struct mm_struct *mm, int *shared, int *text,
int *data, int *resident)
{
- int rss = get_mm_counter(mm, rss);
-
- *shared = rss - get_mm_counter(mm, anon_rss);
+ *shared = get_mm_counter(mm, file_rss);
*text = (PAGE_ALIGN(mm->end_code) - (mm->start_code & PAGE_MASK))
>> PAGE_SHIFT;
*data = mm->total_vm - mm->shared_vm;
- *resident = rss;
+ *resident = *shared + get_mm_counter(mm, anon_rss);
return mm->total_vm;
}
@@ -186,13 +203,14 @@
struct mem_size_stats *mss)
{
pte_t *pte, ptent;
+ spinlock_t *ptl;
unsigned long pfn;
struct page *page;
- pte = pte_offset_map(pmd, addr);
+ pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
do {
ptent = *pte;
- if (pte_none(ptent) || !pte_present(ptent))
+ if (!pte_present(ptent))
continue;
mss->resident += PAGE_SIZE;
@@ -213,8 +231,8 @@
mss->private_clean += PAGE_SIZE;
}
} while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap(pte - 1);
- cond_resched_lock(&vma->vm_mm->page_table_lock);
+ pte_unmap_unlock(pte - 1, ptl);
+ cond_resched();
}
static inline void smaps_pmd_range(struct vm_area_struct *vma, pud_t *pud,
@@ -268,17 +286,11 @@
static int show_smap(struct seq_file *m, void *v)
{
struct vm_area_struct *vma = v;
- struct mm_struct *mm = vma->vm_mm;
struct mem_size_stats mss;
memset(&mss, 0, sizeof mss);
-
- if (mm) {
- spin_lock(&mm->page_table_lock);
+ if (vma->vm_mm)
smaps_pgd_range(vma, vma->vm_start, vma->vm_end, &mss);
- spin_unlock(&mm->page_table_lock);
- }
-
return show_map_internal(m, v, &mss);
}
@@ -407,7 +419,6 @@
for_each_node(i)
md->node[i] =0;
- spin_lock(&mm->page_table_lock);
for (vaddr = vma->vm_start; vaddr < vma->vm_end; vaddr += PAGE_SIZE) {
page = follow_page(mm, vaddr, 0);
if (page) {
@@ -422,8 +433,8 @@
md->anon++;
md->node[page_to_nid(page)]++;
}
+ cond_resched();
}
- spin_unlock(&mm->page_table_lock);
return md;
}
@@ -469,7 +480,7 @@
seq_printf(m, " interleave={");
first = 1;
for_each_node(n) {
- if (test_bit(n, pol->v.nodes)) {
+ if (node_isset(n, pol->v.nodes)) {
if (!first)
seq_putc(m,',');
else
diff --git a/fs/reiserfs/fix_node.c b/fs/reiserfs/fix_node.c
index 2706e2a..4582988 100644
--- a/fs/reiserfs/fix_node.c
+++ b/fs/reiserfs/fix_node.c
@@ -2022,7 +2022,7 @@
}
#ifdef CONFIG_REISERFS_CHECK
-void *reiserfs_kmalloc(size_t size, int flags, struct super_block *s)
+void *reiserfs_kmalloc(size_t size, gfp_t flags, struct super_block *s)
{
void *vp;
static size_t malloced;
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index d76ee6c..5f82352 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -2842,7 +2842,7 @@
* even in -o notail mode, we can't be sure an old mount without -o notail
* didn't create files with tails.
*/
-static int reiserfs_releasepage(struct page *page, int unused_gfp_flags)
+static int reiserfs_releasepage(struct page *page, gfp_t unused_gfp_flags)
{
struct inode *inode = page->mapping->host;
struct reiserfs_journal *j = SB_JOURNAL(inode->i_sb);
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 44b02fc..42afb5b 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1024,12 +1024,8 @@
strcpy(REISERFS_SB(s)->s_qf_names[qtype], arg);
*mount_options |= 1 << REISERFS_QUOTA;
} else {
- if (REISERFS_SB(s)->s_qf_names[qtype]) {
- kfree(REISERFS_SB(s)->
- s_qf_names[qtype]);
- REISERFS_SB(s)->s_qf_names[qtype] =
- NULL;
- }
+ kfree(REISERFS_SB(s)->s_qf_names[qtype]);
+ REISERFS_SB(s)->s_qf_names[qtype] = NULL;
}
}
if (c == 'f') {
@@ -1158,11 +1154,10 @@
if (!reiserfs_parse_options
(s, arg, &mount_options, &blocks, NULL, &commit_max_age)) {
#ifdef CONFIG_QUOTA
- for (i = 0; i < MAXQUOTAS; i++)
- if (REISERFS_SB(s)->s_qf_names[i]) {
- kfree(REISERFS_SB(s)->s_qf_names[i]);
- REISERFS_SB(s)->s_qf_names[i] = NULL;
- }
+ for (i = 0; i < MAXQUOTAS; i++) {
+ kfree(REISERFS_SB(s)->s_qf_names[i]);
+ REISERFS_SB(s)->s_qf_names[i] = NULL;
+ }
#endif
return -EINVAL;
}
@@ -1940,13 +1935,11 @@
brelse(SB_BUFFER_WITH_SB(s));
#ifdef CONFIG_QUOTA
for (j = 0; j < MAXQUOTAS; j++) {
- if (sbi->s_qf_names[j])
- kfree(sbi->s_qf_names[j]);
+ kfree(sbi->s_qf_names[j]);
+ sbi->s_qf_names[j] = NULL;
}
#endif
- if (sbi != NULL) {
- kfree(sbi);
- }
+ kfree(sbi);
s->s_fs_info = NULL;
return errval;
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 87ac9dc..72e1207 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -453,7 +453,7 @@
struct page *page;
/* We can deadlock if we try to free dentries,
and an unlink/rmdir has just occured - GFP_NOFS avoids this */
- mapping->flags = (mapping->flags & ~__GFP_BITS_MASK) | GFP_NOFS;
+ mapping_set_gfp_mask(mapping, GFP_NOFS);
page = read_cache_page(mapping, n,
(filler_t *) mapping->a_ops->readpage, NULL);
if (!IS_ERR(page)) {
diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c
index 6703efa..a47ac9a 100644
--- a/fs/reiserfs/xattr_acl.c
+++ b/fs/reiserfs/xattr_acl.c
@@ -296,8 +296,7 @@
}
}
- if (value)
- kfree(value);
+ kfree(value);
if (!error) {
/* Release the old one */
diff --git a/fs/super.c b/fs/super.c
index 6e57ee2..f60155e 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -513,7 +513,7 @@
struct file *f;
file_list_lock();
- list_for_each_entry(f, &sb->s_files, f_list) {
+ list_for_each_entry(f, &sb->s_files, f_u.fu_list) {
if (S_ISREG(f->f_dentry->d_inode->i_mode) && file_count(f))
f->f_mode &= ~FMODE_WRITE;
}
diff --git a/fs/vfat/namei.c b/fs/vfat/namei.c
index 1c6f6b5..ef46939 100644
--- a/fs/vfat/namei.c
+++ b/fs/vfat/namei.c
@@ -621,8 +621,7 @@
}
/* build the entry of long file name */
- for (cksum = i = 0; i < 11; i++)
- cksum = (((cksum&1)<<7)|((cksum&0xfe)>>1)) + msdos_name[i];
+ cksum = fat_checksum(msdos_name);
*nr_slots = usize / 13;
for (ps = slots, i = *nr_slots; i > 0; i--, ps++) {
@@ -888,10 +887,10 @@
{
struct buffer_head *dotdot_bh;
struct msdos_dir_entry *dotdot_de;
- loff_t dotdot_i_pos;
struct inode *old_inode, *new_inode;
struct fat_slot_info old_sinfo, sinfo;
struct timespec ts;
+ loff_t dotdot_i_pos, new_i_pos;
int err, is_dir, update_dotdot, corrupt = 0;
old_sinfo.bh = sinfo.bh = dotdot_bh = NULL;
@@ -914,31 +913,24 @@
ts = CURRENT_TIME_SEC;
if (new_inode) {
- err = vfat_find(new_dir, &new_dentry->d_name, &sinfo);
- if (err)
- goto out;
- if (MSDOS_I(new_inode)->i_pos != sinfo.i_pos) {
- /* WTF??? Cry and fail. */
- printk(KERN_WARNING "vfat_rename: fs corrupted\n");
- goto out;
- }
-
if (is_dir) {
err = fat_dir_empty(new_inode);
if (err)
goto out;
}
+ new_i_pos = MSDOS_I(new_inode)->i_pos;
fat_detach(new_inode);
} else {
err = vfat_add_entry(new_dir, &new_dentry->d_name, is_dir, 0,
&ts, &sinfo);
if (err)
goto out;
+ new_i_pos = sinfo.i_pos;
}
new_dir->i_version++;
fat_detach(old_inode);
- fat_attach(old_inode, sinfo.i_pos);
+ fat_attach(old_inode, new_i_pos);
if (IS_DIRSYNC(new_dir)) {
err = fat_sync_inode(old_inode);
if (err)
@@ -1002,7 +994,7 @@
fat_detach(old_inode);
fat_attach(old_inode, old_sinfo.i_pos);
if (new_inode) {
- fat_attach(new_inode, sinfo.i_pos);
+ fat_attach(new_inode, new_i_pos);
if (corrupt)
corrupt |= fat_sync_inode(new_inode);
} else {
diff --git a/fs/xattr.c b/fs/xattr.c
index 3f9c64b..f6e00c0 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -143,7 +143,7 @@
if (size) {
if (size > XATTR_SIZE_MAX)
size = XATTR_SIZE_MAX;
- kvalue = kmalloc(size, GFP_KERNEL);
+ kvalue = kzalloc(size, GFP_KERNEL);
if (!kvalue)
return -ENOMEM;
}
@@ -154,11 +154,15 @@
error = -EOPNOTSUPP;
if (d->d_inode->i_op && d->d_inode->i_op->getxattr)
error = d->d_inode->i_op->getxattr(d, kname, kvalue, size);
- else if (!strncmp(kname, XATTR_SECURITY_PREFIX,
- sizeof XATTR_SECURITY_PREFIX - 1)) {
+
+ if (!strncmp(kname, XATTR_SECURITY_PREFIX,
+ sizeof XATTR_SECURITY_PREFIX - 1)) {
const char *suffix = kname + sizeof XATTR_SECURITY_PREFIX - 1;
- error = security_inode_getsecurity(d->d_inode, suffix, kvalue,
- size);
+ int rv = security_inode_getsecurity(d->d_inode, suffix, kvalue,
+ size, error);
+ /* Security module active: overwrite error value */
+ if (rv != -EOPNOTSUPP)
+ error = rv;
}
if (error > 0) {
if (size && copy_to_user(value, kvalue, error))
diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c
index d2653b5..3c92162 100644
--- a/fs/xfs/linux-2.6/kmem.c
+++ b/fs/xfs/linux-2.6/kmem.c
@@ -45,11 +45,11 @@
void *
-kmem_alloc(size_t size, gfp_t flags)
+kmem_alloc(size_t size, unsigned int __nocast flags)
{
- int retries = 0;
- unsigned int lflags = kmem_flags_convert(flags);
- void *ptr;
+ int retries = 0;
+ gfp_t lflags = kmem_flags_convert(flags);
+ void *ptr;
do {
if (size < MAX_SLAB_SIZE || retries > MAX_VMALLOCS)
@@ -67,7 +67,7 @@
}
void *
-kmem_zalloc(size_t size, gfp_t flags)
+kmem_zalloc(size_t size, unsigned int __nocast flags)
{
void *ptr;
@@ -90,7 +90,7 @@
void *
kmem_realloc(void *ptr, size_t newsize, size_t oldsize,
- gfp_t flags)
+ unsigned int __nocast flags)
{
void *new;
@@ -105,11 +105,11 @@
}
void *
-kmem_zone_alloc(kmem_zone_t *zone, gfp_t flags)
+kmem_zone_alloc(kmem_zone_t *zone, unsigned int __nocast flags)
{
- int retries = 0;
- unsigned int lflags = kmem_flags_convert(flags);
- void *ptr;
+ int retries = 0;
+ gfp_t lflags = kmem_flags_convert(flags);
+ void *ptr;
do {
ptr = kmem_cache_alloc(zone, lflags);
@@ -124,7 +124,7 @@
}
void *
-kmem_zone_zalloc(kmem_zone_t *zone, gfp_t flags)
+kmem_zone_zalloc(kmem_zone_t *zone, unsigned int __nocast flags)
{
void *ptr;
diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h
index ee7010f..f4bb78c2 100644
--- a/fs/xfs/linux-2.6/kmem.h
+++ b/fs/xfs/linux-2.6/kmem.h
@@ -81,9 +81,9 @@
*(NSTATEP) = *(OSTATEP); \
} while (0)
-static __inline unsigned int kmem_flags_convert(gfp_t flags)
+static __inline gfp_t kmem_flags_convert(unsigned int __nocast flags)
{
- unsigned int lflags = __GFP_NOWARN; /* we'll report problems, if need be */
+ gfp_t lflags = __GFP_NOWARN; /* we'll report problems, if need be */
#ifdef DEBUG
if (unlikely(flags & ~(KM_SLEEP|KM_NOSLEEP|KM_NOFS|KM_MAYFAIL))) {
@@ -125,16 +125,16 @@
BUG();
}
-extern void *kmem_zone_zalloc(kmem_zone_t *, gfp_t);
-extern void *kmem_zone_alloc(kmem_zone_t *, gfp_t);
+extern void *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast);
+extern void *kmem_zone_alloc(kmem_zone_t *, unsigned int __nocast);
-extern void *kmem_alloc(size_t, gfp_t);
-extern void *kmem_realloc(void *, size_t, size_t, gfp_t);
-extern void *kmem_zalloc(size_t, gfp_t);
+extern void *kmem_alloc(size_t, unsigned int __nocast);
+extern void *kmem_realloc(void *, size_t, size_t, unsigned int __nocast);
+extern void *kmem_zalloc(size_t, unsigned int __nocast);
extern void kmem_free(void *, size_t);
typedef struct shrinker *kmem_shaker_t;
-typedef int (*kmem_shake_func_t)(int, unsigned int);
+typedef int (*kmem_shake_func_t)(int, gfp_t);
static __inline kmem_shaker_t
kmem_shake_register(kmem_shake_func_t sfunc)
@@ -149,7 +149,7 @@
}
static __inline int
-kmem_shake_allow(unsigned int gfp_mask)
+kmem_shake_allow(gfp_t gfp_mask)
{
return (gfp_mask & __GFP_WAIT);
}
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index c6c0779..7aa3987 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1296,7 +1296,7 @@
STATIC int
linvfs_release_page(
struct page *page,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct inode *inode = page->mapping->host;
int dirty, delalloc, unmapped, unwritten;
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index e82cf72..4cd46ab 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -64,7 +64,7 @@
STATIC kmem_cache_t *pagebuf_zone;
STATIC kmem_shaker_t pagebuf_shake;
-STATIC int xfsbufd_wakeup(int, unsigned int);
+STATIC int xfsbufd_wakeup(int, gfp_t);
STATIC void pagebuf_delwri_queue(xfs_buf_t *, int);
STATIC struct workqueue_struct *xfslogd_workqueue;
@@ -181,8 +181,9 @@
size_t offset,
size_t length)
{
- page->private |= page_region_mask(offset, length);
- if (page->private == ~0UL)
+ set_page_private(page,
+ page_private(page) | page_region_mask(offset, length));
+ if (page_private(page) == ~0UL)
SetPageUptodate(page);
}
@@ -194,7 +195,7 @@
{
unsigned long mask = page_region_mask(offset, length);
- return (mask && (page->private & mask) == mask);
+ return (mask && (page_private(page) & mask) == mask);
}
/*
@@ -383,7 +384,7 @@
size_t blocksize = bp->pb_target->pbr_bsize;
size_t size = bp->pb_count_desired;
size_t nbytes, offset;
- int gfp_mask = pb_to_gfp(flags);
+ gfp_t gfp_mask = pb_to_gfp(flags);
unsigned short page_count, i;
pgoff_t first;
loff_t end;
@@ -1749,8 +1750,8 @@
STATIC int
xfsbufd_wakeup(
- int priority,
- unsigned int mask)
+ int priority,
+ gfp_t mask)
{
if (xfsbufd_force_sleep)
return 0;
diff --git a/include/asm-alpha/barrier.h b/include/asm-alpha/barrier.h
index 229c83f..681ff58 100644
--- a/include/asm-alpha/barrier.h
+++ b/include/asm-alpha/barrier.h
@@ -1,6 +1,8 @@
#ifndef __BARRIER_H
#define __BARRIER_H
+#include <asm/compiler.h>
+
#define mb() \
__asm__ __volatile__("mb": : :"memory")
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
index c675f28..680f7ec 100644
--- a/include/asm-alpha/dma-mapping.h
+++ b/include/asm-alpha/dma-mapping.h
@@ -31,7 +31,7 @@
#else /* no PCI - no IOMMU. */
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int gfp);
+ dma_addr_t *dma_handle, gfp_t gfp);
int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction direction);
diff --git a/include/asm-alpha/rwsem.h b/include/asm-alpha/rwsem.h
index 8e058a6..fafdd4f 100644
--- a/include/asm-alpha/rwsem.h
+++ b/include/asm-alpha/rwsem.h
@@ -262,5 +262,10 @@
#endif
}
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
#endif /* __KERNEL__ */
#endif /* _ALPHA_RWSEM_H */
diff --git a/include/asm-alpha/semaphore.h b/include/asm-alpha/semaphore.h
index eb2cbd9..1a6295f 100644
--- a/include/asm-alpha/semaphore.h
+++ b/include/asm-alpha/semaphore.h
@@ -26,9 +26,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait), \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
index 0e9b7e1..0022279 100644
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ b/include/asm-arm/arch-aaec2000/aaec2000.h
@@ -17,6 +17,16 @@
#error You must include hardware.h not this file
#endif /* __ASM_ARCH_HARDWARE_H */
+/* Chip selects */
+#define AAEC_CS0 0x00000000
+#define AAEC_CS1 0x10000000
+#define AAEC_CS2 0x20000000
+#define AAEC_CS3 0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE AAEC_CS0
+#define AAEC_FLASH_SIZE SZ_64M
+
/* Interrupt controller */
#define IRQ_BASE __REG(0x80000500)
#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
@@ -148,4 +158,50 @@
#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS 0x80000e00
+
+#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON (1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON (1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON (1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON (1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS 0x80003000
+
#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h
new file mode 100644
index 0000000..bc76d2b
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/aaed2000.h
@@ -0,0 +1,40 @@
+/*
+ * linux/include/asm-arm/arch-aaec2000/aaed2000.h
+ *
+ * AAED-2000 specific bits definition
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE AAEC_CS3
+#define EXT_GPIO_VBASE 0xf8100000
+#define EXT_GPIO_LENGTH 0x00001000
+
+#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
index 4c37219..153506f 100644
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ b/include/asm-arm/arch-aaec2000/hardware.h
@@ -11,7 +11,8 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#include <linux/config.h>
+#include <asm/sizes.h>
+#include <asm/arch/aaec2000.h>
/* The kernel is loaded at physical address 0xf8000000.
* We map the IO space a bit after
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
index c58a8d1..8d67907 100644
--- a/include/asm-arm/arch-aaec2000/io.h
+++ b/include/asm-arm/arch-aaec2000/io.h
@@ -6,6 +6,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
index 79c9081..d8209f8 100644
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ b/include/asm-arm/arch-aaec2000/memory.h
@@ -13,7 +13,7 @@
#include <linux/config.h>
-#define PHYS_OFFSET (0xf0000000UL)
+#define PHYS_OFFSET UL(0xf0000000)
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h
index f0113bc..89a3328 100644
--- a/include/asm-arm/arch-cl7500/io.h
+++ b/include/asm-arm/arch-cl7500/io.h
@@ -10,6 +10,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-cl7500/memory.h b/include/asm-arm/arch-cl7500/memory.h
index 9776bba..34f40a6 100644
--- a/include/asm-arm/arch-cl7500/memory.h
+++ b/include/asm-arm/arch-cl7500/memory.h
@@ -17,7 +17,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x10000000UL)
+#define PHYS_OFFSET UL(0x10000000)
/*
* These are exactly the same on the RiscPC as the
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
index 1386871..f864c36 100644
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ b/include/asm-arm/arch-clps711x/hardware.h
@@ -235,4 +235,121 @@
#define CEIVA_PB0_BLK_BTN (1<<0)
#endif // #if defined (CONFIG_ARCH_CEIVA)
+#if defined (CONFIG_MACH_MP1000)
+/* NOR FLASH */
+#define MP1000_NIO_BASE 0xf9000000 /* virtual */
+#define MP1000_NIO_START CS0_PHYS_BASE /* physical */
+#define MP1000_NIO_SIZE 0x00400000
+
+/* DSP Interface */
+#define MP1000_DSP_BASE 0xfa000000 /* virtual */
+#define MP1000_DSP_START CS1_PHYS_BASE /* physical */
+#define MP1000_DSP_SIZE 0x00100000
+
+/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
+#define MP1000_LIO_BASE 0xfb000000 /* virtual */
+#define MP1000_LIO_START CS2_PHYS_BASE /* physical */
+#define MP1000_LIO_SIZE 0x00100000
+
+/* NAND FLASH */
+#define MP1000_FIO_BASE 0xfc000000 /* virtual */
+#define MP1000_FIO_START CS3_PHYS_BASE /* physical */
+#define MP1000_FIO_SIZE 0x00800000
+
+/* Ethernet */
+#define MP1000_EIO_BASE 0xfd000000 /* virtual */
+#define MP1000_EIO_START CS4_PHYS_BASE /* physical */
+#define MP1000_EIO_SIZE 0x00100000
+
+#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */
+#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/
+#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */
+#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */
+
+/* IDE */
+#define MP1000_IDE_BASE 0xfe000000 /* virtual */
+#define MP1000_IDE_START CS5_PHYS_BASE /* physical */
+#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */
+
+#define IRQ_HARDDISK IRQ_EINT2
+
+/*
+ * IDE registers definition
+ */
+
+#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000)
+#define IDE_BASE_OFF (MP1000_IDE_BASE)
+
+#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0)
+#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2)
+#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4)
+#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6)
+#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8)
+#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa)
+#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc)
+#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe)
+#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc)
+
+#define IDE_IRQ IRQ_EINT2
+
+
+#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2))
+#define RTC_ALWAYS_BCD 0
+
+/*
+// Definitions of the bit fields in the HwPortA register for the
+// MP1000 board.
+*/
+#define HwPortAKeyboardRow1 0x00000001
+#define HwPortAKeyboardRow2 0x00000002
+#define HwPortAKeyboardRow3 0x00000004
+#define HwPortAKeyboardRow4 0x00000008
+#define HwPortAKeyboardRow5 0x00000010
+#define HwPortAKeyboardRow6 0x00000020
+#define HwPortALCDEnable 0x00000040
+#define HwPortAOffhook 0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortB register for the
+// MP1000 board.
+*/
+#define HwPortBL3Mode 0x00000001
+#define HwPortBL3Clk 0x00000002
+#define HwPortBSClk 0x00000001
+#define HwPortBSData 0x00000002
+#define HwPortBL3Data 0x00000004
+#define HwPortBMute 0x00000008
+#define HwPortBQD0 0x00000010
+#define HwPortBQD1 0x00000020
+#define HwPortBQD2 0x00000040
+#define HwPortBQD3 0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortD register for the
+// MP1000 board.
+*/
+#define HwPortDLED1 0x00000001
+#define HwPortDLED2 0x00000002
+#define HwPortDLED3 0x00000004
+#define HwPortDLED4 0x00000008
+#define HwPortDLED5 0x00000010
+#define HwPortDEECS 0x00000020
+#define HwPortBRTS 0x00000040
+#define HwPortBRI 0x00000080
+
+
+/*
+// Definitions of the bit fields in the HwPortE register for the
+// MP1000 board.
+*/
+
+#define HwPortECLE 0x00000001
+#define HwPortESepromDOut 0x00000001
+#define HwPortEALE 0x00000002
+#define HwPortESepromDIn 0x00000002
+#define HwPortENANDCS 0x00000004
+#define HwPortESepromCLK 0x00000004
+
+#endif // #if defined (CONFIG_MACH_MP1000)
+
#endif
diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h
index 14d7e8d..62613b0 100644
--- a/include/asm-arm/arch-clps711x/io.h
+++ b/include/asm-arm/arch-clps711x/io.h
@@ -20,6 +20,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(a))
diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h
index bd97894..61d8717 100644
--- a/include/asm-arm/arch-clps711x/memory.h
+++ b/include/asm-arm/arch-clps711x/memory.h
@@ -25,7 +25,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0xc0000000UL)
+#define PHYS_OFFSET UL(0xc0000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h
new file mode 100644
index 0000000..3e5566c
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/mp1000-seprom.h
@@ -0,0 +1,77 @@
+#ifndef MP1000_SEPROM_H
+#define MP1000_SEPROM_H
+
+/*
+ * mp1000-seprom.h
+ *
+ *
+ * This file contains the Serial EEPROM definitions for the MP1000 board
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define COMMAND_ERASE (0x1C0)
+#define COMMAND_ERASE_ALL (0x120)
+#define COMMAND_WRITE_DISABLE (0x100)
+#define COMMAND_WRITE_ENABLE (0x130)
+#define COMMAND_READ (0x180)
+#define COMMAND_WRITE (0x140)
+#define COMMAND_WRITE_ALL (0x110)
+
+//
+// Serial EEPROM data format
+//
+
+#define PACKED __attribute__ ((packed))
+
+typedef struct _EEPROM {
+ union {
+ unsigned char eprom_byte_data[128];
+ unsigned short eprom_short_data[64];
+ struct {
+ unsigned char version PACKED; // EEPROM Version "1" for now
+ unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc)
+ unsigned char major_hw_version PACKED; // Major Hardware version (Hex)
+ unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex)
+ unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic)
+ unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number
+ unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD)
+ unsigned char country PACKED; // Country of deployment
+ unsigned char mac_Address[6] PACKED; // MAC Address
+ unsigned char oem_string[20] PACKED; // OEM ID string
+ unsigned short feature_bits1 PACKED; // Feature Bits 1
+ unsigned short feature_bits2 PACKED; // Feature Bits 2
+ unsigned char filler[75] PACKED; // Unused/Undefined “0” initialized
+ unsigned short checksum PACKED; // byte accumulated short checksum
+ } eprom_struct;
+ } variant;
+} eeprom_struct;
+
+/* These settings must be mutually exclusive */
+#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */
+#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */
+#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */
+
+#define FEATURE_BITS1_CPUIS90MEG 0x0010
+
+extern void seprom_init(void);
+extern eeprom_struct* get_seprom_ptr(void);
+extern unsigned char* get_eeprom_mac_address(void);
+
+#endif /* MP1000_SEPROM_H */
+
diff --git a/include/asm-arm/arch-ebsa110/memory.h b/include/asm-arm/arch-ebsa110/memory.h
index 5a9493e..02f1445 100644
--- a/include/asm-arm/arch-ebsa110/memory.h
+++ b/include/asm-arm/arch-ebsa110/memory.h
@@ -19,7 +19,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x00000000UL)
+#define PHYS_OFFSET UL(0x00000000)
/*
* We keep this 1:1 so that we don't interfere
diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h
index 70576b1..776f9d3 100644
--- a/include/asm-arm/arch-ebsa285/io.h
+++ b/include/asm-arm/arch-ebsa285/io.h
@@ -14,6 +14,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffff
/*
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h
index d0466f9..09e335c 100644
--- a/include/asm-arm/arch-ebsa285/memory.h
+++ b/include/asm-arm/arch-ebsa285/memory.h
@@ -46,14 +46,14 @@
#if defined(CONFIG_ARCH_FOOTBRIDGE)
/* Task size and page offset at 3GB */
-#define TASK_SIZE (0xbf000000UL)
-#define PAGE_OFFSET (0xc0000000UL)
+#define TASK_SIZE UL(0xbf000000)
+#define PAGE_OFFSET UL(0xc0000000)
#elif defined(CONFIG_ARCH_CO285)
/* Task size and page offset at 1.5GB */
-#define TASK_SIZE (0x5f000000UL)
-#define PAGE_OFFSET (0x60000000UL)
+#define TASK_SIZE UL(0x5f000000)
+#define PAGE_OFFSET UL(0x60000000)
#else
@@ -64,7 +64,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x00000000UL)
+#define PHYS_OFFSET UL(0x00000000)
/*
* This decides where the kernel will search for a free chunk of vm
diff --git a/include/asm-arm/arch-epxa10db/io.h b/include/asm-arm/arch-epxa10db/io.h
index 1f0afa2..9fe100c 100644
--- a/include/asm-arm/arch-epxa10db/io.h
+++ b/include/asm-arm/arch-epxa10db/io.h
@@ -20,6 +20,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffff
diff --git a/include/asm-arm/arch-epxa10db/memory.h b/include/asm-arm/arch-epxa10db/memory.h
index 3f86bf7..999541b 100644
--- a/include/asm-arm/arch-epxa10db/memory.h
+++ b/include/asm-arm/arch-epxa10db/memory.h
@@ -23,7 +23,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x00000000UL)
+#define PHYS_OFFSET UL(0x00000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h
index 6881482..d3ccfd8 100644
--- a/include/asm-arm/arch-h720x/io.h
+++ b/include/asm-arm/arch-h720x/io.h
@@ -14,7 +14,7 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h
index 5633447..4a1bfd7 100644
--- a/include/asm-arm/arch-h720x/memory.h
+++ b/include/asm-arm/arch-h720x/memory.h
@@ -11,7 +11,7 @@
* Page offset:
* ( 0xc0000000UL )
*/
-#define PHYS_OFFSET (0x40000000UL)
+#define PHYS_OFFSET UL(0x40000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
index 28a4cca..b191cdd 100644
--- a/include/asm-arm/arch-imx/io.h
+++ b/include/asm-arm/arch-imx/io.h
@@ -20,6 +20,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(a))
diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h
index 116a91f..d09ae32 100644
--- a/include/asm-arm/arch-imx/memory.h
+++ b/include/asm-arm/arch-imx/memory.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_MMU_H
#define __ASM_ARCH_MMU_H
-#define PHYS_OFFSET (0x08000000UL)
+#define PHYS_OFFSET UL(0x08000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h
index be2716e..6f0947b 100644
--- a/include/asm-arm/arch-integrator/hardware.h
+++ b/include/asm-arm/arch-integrator/hardware.h
@@ -33,15 +33,6 @@
#define IO_SIZE 0x0B000000 // How much?
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
-/*
- * Similar to above, but for PCI addresses (memory, IO, Config and the
- * V3 chip itself). WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR 0xe8000000
-#define PCI_CONFIG_VADDR 0xec000000
-#define PCI_V3_VADDR 0xed000000
-#define PCI_IO_VADDR 0xee000000
-
#define PCIO_BASE PCI_IO_VADDR
#define PCIMEM_BASE PCI_MEMORY_VADDR
diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h
index fbea8be..31f2dea 100644
--- a/include/asm-arm/arch-integrator/io.h
+++ b/include/asm-arm/arch-integrator/io.h
@@ -22,6 +22,14 @@
#define IO_SPACE_LIMIT 0xffff
+/*
+ * WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR 0xe8000000
+#define PCI_CONFIG_VADDR 0xec000000
+#define PCI_V3_VADDR 0xed000000
+#define PCI_IO_VADDR 0xee000000
+
#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a)))
#define __mem_pci(a) (a)
#define __mem_isa(a) ((a) + PCI_MEMORY_VADDR)
diff --git a/include/asm-arm/arch-integrator/memory.h b/include/asm-arm/arch-integrator/memory.h
index 2087ea7..1ab56d7 100644
--- a/include/asm-arm/arch-integrator/memory.h
+++ b/include/asm-arm/arch-integrator/memory.h
@@ -23,8 +23,8 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x00000000UL)
-#define BUS_OFFSET (0x80000000UL)
+#define PHYS_OFFSET UL(0x00000000)
+#define BUS_OFFSET UL(0x80000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-iop3xx/io.h b/include/asm-arm/arch-iop3xx/io.h
index 2761dfd..f39046a 100644
--- a/include/asm-arm/arch-iop3xx/io.h
+++ b/include/asm-arm/arch-iop3xx/io.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)(p))
diff --git a/include/asm-arm/arch-iop3xx/memory.h b/include/asm-arm/arch-iop3xx/memory.h
index 45351f5..bc62f4b 100644
--- a/include/asm-arm/arch-iop3xx/memory.h
+++ b/include/asm-arm/arch-iop3xx/memory.h
@@ -12,9 +12,9 @@
* Physical DRAM offset.
*/
#ifndef CONFIG_ARCH_IOP331
-#define PHYS_OFFSET (0xa0000000UL)
+#define PHYS_OFFSET UL(0xa0000000)
#else
-#define PHYS_OFFSET (0x00000000UL)
+#define PHYS_OFFSET UL(0x00000000)
#endif
/*
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
index 3241cd6..7fbcdf9 100644
--- a/include/asm-arm/arch-ixp2000/io.h
+++ b/include/asm-arm/arch-ixp2000/io.h
@@ -15,6 +15,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __mem_pci(a) (a)
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h
index b768009..c6d5142 100644
--- a/include/asm-arm/arch-ixp2000/ixdp2x01.h
+++ b/include/asm-arm/arch-ixp2000/ixdp2x01.h
@@ -22,7 +22,7 @@
#define IXDP2X01_CPLD_REGION_SIZE 0x00100000
#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
-#define IXDP2X01_CPLD_PHYS_REG(reg) (volatile u32*)(IXDP2X01_PHYS_CPLD_BASE | reg)
+#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40)
#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40)
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index 32aece0..def089d 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -392,4 +392,47 @@
#define WDT_RESET_ENABLE 0x01000000
+/*
+ * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF
+ * units, but the registers that differ between the two don't overlap,
+ * so we can have one register list for both.
+ */
+#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
+#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000)
+#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004)
+#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008)
+#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c)
+#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010)
+#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014)
+#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018)
+#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024)
+#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028)
+#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c)
+#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040)
+#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044)
+#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058)
+#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060)
+#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064)
+#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068)
+#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080)
+#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084)
+#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088)
+#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c)
+#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090)
+#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094)
+#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098)
+#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c)
+#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0)
+#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4)
+#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8)
+#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000)
+#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400)
+
+
#endif /* _IXP2000_H_ */
diff --git a/include/asm-arm/arch-ixp2000/memory.h b/include/asm-arm/arch-ixp2000/memory.h
index d0f415c..21e1de5 100644
--- a/include/asm-arm/arch-ixp2000/memory.h
+++ b/include/asm-arm/arch-ixp2000/memory.h
@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET (0x00000000UL)
+#define PHYS_OFFSET UL(0x00000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
index abdcf51..a66317a 100644
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ b/include/asm-arm/arch-ixp2000/platform.h
@@ -15,40 +15,40 @@
#ifndef __ASSEMBLY__
-/*
- * The IXP2400 B0 silicon contains an erratum (#66) that causes writes
- * to on-chip I/O register to not complete fully. What this means is
- * that if you have a write to on-chip I/O followed by a back-to-back
- * read or write, the first write will happen twice. OR...if it's
- * not a back-to-back transaction, the read or write will generate
- * incorrect data.
- *
- * The official work around for this is to set the on-chip I/O regions
- * as XCB=101 and then force a read-back from the register.
- *
- */
-#if defined(CONFIG_ARCH_ENP2611) || defined(CONFIG_ARCH_IXDP2400) || defined(CONFIG_ARCH_IXDP2401)
-
-#include <asm/system.h> /* Pickup local_irq_ functions */
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+ return *((volatile unsigned long *)reg);
+}
static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
{
+ *((volatile unsigned long *)reg) = val;
+}
+
+/*
+ * On the IXP2400, we can't use XCB=000 due to chip bugs. We use
+ * XCB=101 instead, but that makes all I/O accesses bufferable. This
+ * is not a problem in general, but we do have to be slightly more
+ * careful because I/O writes are no longer automatically flushed out
+ * of the write buffer.
+ *
+ * In cases where we want to make sure that a write has been flushed
+ * out of the write buffer before we proceed, for example when masking
+ * a device interrupt before re-enabling IRQs in CPSR, we can use this
+ * function, ixp2000_reg_wrb, which performs a write, a readback, and
+ * issues a dummy instruction dependent on the value of the readback
+ * (mov rX, rX) to make sure that the readback has completed before we
+ * continue.
+ */
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
unsigned long dummy;
- unsigned long flags;
- local_irq_save(flags);
*((volatile unsigned long *)reg) = val;
- barrier();
+
dummy = *((volatile unsigned long *)reg);
- local_irq_restore(flags);
+ __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
}
-#else
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
- *((volatile unsigned long *)reg) = val;
-}
-#endif /* IXDP2400 || IXDP2401 */
-#define ixp2000_reg_read(reg) (*((volatile unsigned long *)reg))
/*
* Boards may multiplex different devices on the 2nd channel of
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
index e350dcb..80d05ec 100644
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ b/include/asm-arm/arch-ixp4xx/io.h
@@ -113,7 +113,7 @@
}
static inline void
-__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count)
+__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
{
while (count--)
writeb(*vaddr++, bus_addr);
@@ -136,7 +136,7 @@
}
static inline void
-__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count)
+__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
{
while (count--)
writew(*vaddr++, bus_addr);
@@ -154,7 +154,7 @@
}
static inline void
-__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count)
+__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
{
while (count--)
writel(*vaddr++, bus_addr);
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
index 004696a..2b149ed 100644
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
@@ -36,11 +36,11 @@
*
* 0x6000000 0x00004000 ioremap'd QMgr
*
- * 0xC0000000 0x00001000 0xffbfe000 PCI CFG
+ * 0xC0000000 0x00001000 0xffbff000 PCI CFG
*
- * 0xC4000000 0x00001000 0xffbfd000 EXP CFG
+ * 0xC4000000 0x00001000 0xffbfe000 EXP CFG
*
- * 0xC8000000 0x0000C000 0xffbf2000 On-Chip Peripherals
+ * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals
*/
/*
@@ -52,22 +52,22 @@
* Expansion BUS Configuration registers
*/
#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000)
+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000)
#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
/*
* PCI Config registers
*/
#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000)
-#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFE000)
+#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFF000)
#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000)
/*
* Peripheral space
*/
#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBF2000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE (0x0000C000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBEB000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000)
/*
* Debug UART
@@ -115,25 +115,48 @@
/*
* Peripheral Space Register Region Base Addresses
*/
-#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
+#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
+#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
+#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
+#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
+#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+
+#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
+#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
+#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
+#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
+#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
+#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
/*
* Constants to make it easy to access Interrupt Controller registers
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
index d348548..e024d0a 100644
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ b/include/asm-arm/arch-ixp4xx/memory.h
@@ -12,7 +12,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x00000000UL)
+#define PHYS_OFFSET UL(0x00000000)
#ifndef __ASSEMBLY__
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
index fc012a3..cab8ad0 100644
--- a/include/asm-arm/arch-l7200/io.h
+++ b/include/asm-arm/arch-l7200/io.h
@@ -10,7 +10,7 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h
index c5b9608..9e50a17 100644
--- a/include/asm-arm/arch-l7200/memory.h
+++ b/include/asm-arm/arch-l7200/memory.h
@@ -15,7 +15,7 @@
/*
* Physical DRAM offset on the L7200 SDB.
*/
-#define PHYS_OFFSET (0xf0000000UL)
+#define PHYS_OFFSET UL(0xf0000000)
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h
index c13bdd9..bbcd433 100644
--- a/include/asm-arm/arch-lh7a40x/io.h
+++ b/include/asm-arm/arch-lh7a40x/io.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/* No ISA or PCI bus on this machine. */
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h
index c650e6f..c92bcb8 100644
--- a/include/asm-arm/arch-lh7a40x/memory.h
+++ b/include/asm-arm/arch-lh7a40x/memory.h
@@ -17,7 +17,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0xc0000000UL)
+#define PHYS_OFFSET UL(0xc0000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 11fbf62..3d5bcd5 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -34,6 +34,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
index ef32d61..bf545b6 100644
--- a/include/asm-arm/arch-omap/memory.h
+++ b/include/asm-arm/arch-omap/memory.h
@@ -37,9 +37,9 @@
* Physical DRAM offset.
*/
#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET (0x10000000UL)
+#define PHYS_OFFSET UL(0x10000000)
#elif defined(CONFIG_ARCH_OMAP2)
-#define PHYS_OFFSET (0x80000000UL)
+#define PHYS_OFFSET UL(0x80000000)
#endif
/*
@@ -66,7 +66,7 @@
/*
* OMAP-1510 Local Bus address offset
*/
-#define OMAP1510_LB_OFFSET (0x30000000UL)
+#define OMAP1510_LB_OFFSET UL(0x30000000)
#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index cf35721..3e70bd9 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -44,12 +44,12 @@
#ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
+# define __REG(x) (*((volatile u32 *)io_p2v(x)))
/* With indexed regs we don't want to feed the index through io_p2v()
especially if it is a variable, otherwise horrible code will result. */
# define __REG2(x,y) \
- (*(volatile unsigned long *)((unsigned long)&__REG(x) + (y)))
+ (*(volatile u32 *)((u32)&__REG(x) + (y)))
# define __PREG(x) (io_v2p((u32)&(x)))
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
index c3bdbe4..eb2dd58 100644
--- a/include/asm-arm/arch-pxa/io.h
+++ b/include/asm-arm/arch-pxa/io.h
@@ -6,6 +6,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
new file mode 100644
index 0000000..748406f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/irda.h
@@ -0,0 +1,17 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF 1
+#define IR_SIRMODE 2
+#define IR_FIRMODE 4
+
+struct pxaficp_platform_data {
+ int transceiver_cap;
+ void (*transceiver_mode)(struct device *dev, int mode);
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#endif
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
index 58bad97..eaf6d43 100644
--- a/include/asm-arm/arch-pxa/memory.h
+++ b/include/asm-arm/arch-pxa/memory.h
@@ -15,7 +15,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0xa0000000UL)
+#define PHYS_OFFSET UL(0xa0000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 3af7165..a75a247 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -326,6 +326,25 @@
#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+/* Hardware UART (HWUART) */
+#define HWUART HWRBR
+#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
+#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
+#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
+#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
+#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
+#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
+#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
+#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
+#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
+#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
+#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
+#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
+#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
+#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
+#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
#define IER_DMAE (1 << 7) /* DMA Requests Enable */
#define IER_UUE (1 << 6) /* UART Unit Enable */
#define IER_NRZE (1 << 5) /* NRZ coding Enable */
@@ -1013,14 +1032,12 @@
#define ICCR0_LBM (1 << 1) /* Loopback mode */
#define ICCR0_ITR (1 << 0) /* IrDA transmission */
-#ifdef CONFIG_PXA27x
#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
-#endif
#ifdef CONFIG_PXA27x
#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
@@ -1250,9 +1267,13 @@
#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */
#define GPIO41_FFRTS 41 /* FFUART request to send */
#define GPIO42_BTRXD 42 /* BTUART receive data */
+#define GPIO42_HWRXD 42 /* HWUART receive data */
#define GPIO43_BTTXD 43 /* BTUART transmit data */
+#define GPIO43_HWTXD 43 /* HWUART transmit data */
#define GPIO44_BTCTS 44 /* BTUART clear to send */
+#define GPIO44_HWCTS 44 /* HWUART clear to send */
#define GPIO45_BTRTS 45 /* BTUART request to send */
+#define GPIO45_HWRTS 45 /* HWUART request to send */
#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */
#define GPIO46_ICPRXD 46 /* ICP receive data */
#define GPIO46_STRXD 46 /* STD_UART receive data */
@@ -1378,17 +1399,26 @@
#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT)
#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT)
#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN)
#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT)
#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN)
#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT)
#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT)
#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT)
#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN)
#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT)
#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT)
#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT)
#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT)
#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT)
@@ -1763,6 +1793,7 @@
#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */
#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */
#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */
+#define CKEN4_HWUART (1 << 4) /* HWUART Unit Clock Enable */
#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */
#define CKEN3_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */
@@ -2282,4 +2313,11 @@
#endif
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE 0x1
+#define PWRMODE_STANDBY 0x2
+#define PWRMODE_SLEEP 0x3
+#define PWRMODE_DEEPSLEEP 0x7
+
#endif
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
index 4428d3e..fe38090 100644
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ b/include/asm-arm/arch-pxa/uncompress.h
@@ -12,6 +12,7 @@
#define FFUART ((volatile unsigned long *)0x40100000)
#define BTUART ((volatile unsigned long *)0x40200000)
#define STUART ((volatile unsigned long *)0x40700000)
+#define HWUART ((volatile unsigned long *)0x41600000)
#define UART FFUART
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
index 24453c4..b4da08d 100644
--- a/include/asm-arm/arch-rpc/io.h
+++ b/include/asm-arm/arch-rpc/io.h
@@ -13,6 +13,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-rpc/memory.h b/include/asm-arm/arch-rpc/memory.h
index 33fc75c..0592cb3 100644
--- a/include/asm-arm/arch-rpc/memory.h
+++ b/include/asm-arm/arch-rpc/memory.h
@@ -21,7 +21,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x10000000UL)
+#define PHYS_OFFSET UL(0x10000000)
/*
* These are exactly the same on the RiscPC as the
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
index ac57bc8..4790491 100644
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ b/include/asm-arm/arch-s3c2410/fb.h
@@ -13,6 +13,7 @@
* 07-Sep-2004 RTP Created file
* 03-Nov-2004 BJD Updated and minor cleanups
* 03-Aug-2005 RTP Renamed to fb.h
+ * 26-Oct-2005 BJD Changed name of platdata init
*/
#ifndef __ASM_ARM_FB_H
@@ -64,6 +65,6 @@
unsigned long lpcsel;
};
-void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info);
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
#endif /* __ASM_ARM_FB_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
index 4bf272e..16fbc8a 100644
--- a/include/asm-arm/arch-s3c2410/io.h
+++ b/include/asm-arm/arch-s3c2410/io.h
@@ -15,6 +15,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h
index 3380ab1..6ab834a 100644
--- a/include/asm-arm/arch-s3c2410/memory.h
+++ b/include/asm-arm/arch-s3c2410/memory.h
@@ -28,9 +28,9 @@
* and at 0x0C000000 for S3C2400
*/
#ifdef CONFIG_CPU_S3C2400
-#define PHYS_OFFSET (0x0C000000UL)
+#define PHYS_OFFSET UL(0x0C000000)
#else
-#define PHYS_OFFSET (0x30000000UL)
+#define PHYS_OFFSET UL(0x30000000)
#endif
/*
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 2053cba..cb33d57 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -20,6 +20,7 @@
* 18-11-2004 BJD Added S3C2440 AC97 controls
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 28-Mar-2005 LCVR Fixed definition of GPB10
+ * 26-Oct-2005 BJD Added generic configuration types
*/
@@ -43,6 +44,11 @@
/* general configuration options */
#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT (0xFFFFFFF0)
+#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
+#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */
+#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
/* configure GPIO ports A..G */
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h
index 19c3b1e..28711aa 100644
--- a/include/asm-arm/arch-sa1100/hardware.h
+++ b/include/asm-arm/arch-sa1100/hardware.h
@@ -22,13 +22,6 @@
/*
- * We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for
- * in*()/out*() macros to be usable for all cases.
- */
-#define PCIO_BASE 0
-
-
-/*
* SA1100 internal I/O mappings
*
* We have the following mapping:
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
index 7d969ff..9d4fe6c 100644
--- a/include/asm-arm/arch-sa1100/io.h
+++ b/include/asm-arm/arch-sa1100/io.h
@@ -10,13 +10,19 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h
index 8743ff5..0fc555b 100644
--- a/include/asm-arm/arch-sa1100/memory.h
+++ b/include/asm-arm/arch-sa1100/memory.h
@@ -13,7 +13,7 @@
/*
* Physical DRAM offset is 0xc0000000 on the SA1100
*/
-#define PHYS_OFFSET (0xc0000000UL)
+#define PHYS_OFFSET UL(0xc0000000)
#ifndef __ASSEMBLY__
diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h
index 6f52118..0f0612f 100644
--- a/include/asm-arm/arch-sa1100/system.h
+++ b/include/asm-arm/arch-sa1100/system.h
@@ -4,6 +4,7 @@
* Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
*/
#include <linux/config.h>
+#include <asm/hardware.h>
static inline void arch_idle(void)
{
diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h
index 5e6ed00..87ffa27 100644
--- a/include/asm-arm/arch-shark/io.h
+++ b/include/asm-arm/arch-shark/io.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-shark/memory.h b/include/asm-arm/arch-shark/memory.h
index 8ff956d..95a29b4 100644
--- a/include/asm-arm/arch-shark/memory.h
+++ b/include/asm-arm/arch-shark/memory.h
@@ -15,7 +15,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x08000000UL)
+#define PHYS_OFFSET UL(0x08000000)
#ifndef __ASSEMBLY__
diff --git a/include/asm-arm/arch-versatile/memory.h b/include/asm-arm/arch-versatile/memory.h
index 7b8b7cc..a937097 100644
--- a/include/asm-arm/arch-versatile/memory.h
+++ b/include/asm-arm/arch-versatile/memory.h
@@ -23,7 +23,7 @@
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x00000000UL)
+#define PHYS_OFFSET UL(0x00000000)
/*
* Virtual view <-> DMA view memory address translations
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
index d62ade4..e3e8541 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/include/asm-arm/dma-mapping.h
@@ -70,7 +70,7 @@
* device-viewed address.
*/
extern void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp);
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
/**
* dma_free_coherent - free memory allocated by dma_alloc_coherent
@@ -117,7 +117,7 @@
* device-viewed address.
*/
extern void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp);
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
#define dma_free_writecombine(dev,size,cpu_addr,handle) \
dma_free_coherent(dev,size,cpu_addr,handle)
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 5c4ae8f..2e67996 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -26,7 +26,6 @@
#include <linux/types.h>
#include <asm/byteorder.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
/*
* ISA I/O bus memory addresses are 1:1 with the physical address.
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
index 4fa9508..eb262e07 100644
--- a/include/asm-arm/mach/arch.h
+++ b/include/asm-arm/mach/arch.h
@@ -48,10 +48,11 @@
* Set of macros to define architecture features. This is built into
* a table by the linker.
*/
-#define MACHINE_START(_type,_name) \
-const struct machine_desc __mach_desc_##_type \
+#define MACHINE_START(_type,_name) \
+static const struct machine_desc __mach_desc_##_type \
+ __attribute_used__ \
__attribute__((__section__(".arch.info.init"))) = { \
- .nr = MACH_TYPE_##_type, \
+ .nr = MACH_TYPE_##_type, \
.name = _name,
#define MACHINE_END \
diff --git a/include/asm-arm/mach/flash.h b/include/asm-arm/mach/flash.h
index a92887d..cd57436 100644
--- a/include/asm-arm/mach/flash.h
+++ b/include/asm-arm/mach/flash.h
@@ -14,6 +14,7 @@
/*
* map_name: the map probe function name
+ * name: flash device name (eg, as used with mtdparts=)
* width: width of mapped device
* init: method called at driver/device initialisation
* exit: method called at driver/device removal
@@ -23,6 +24,7 @@
*/
struct flash_platform_data {
const char *map_name;
+ const char *name;
unsigned int width;
int (*init)(void);
void (*exit)(void);
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
index 9ac47cf..b338936 100644
--- a/include/asm-arm/mach/map.h
+++ b/include/asm-arm/mach/map.h
@@ -11,7 +11,7 @@
*/
struct map_desc {
unsigned long virtual;
- unsigned long physical;
+ unsigned long pfn;
unsigned long length;
unsigned int type;
};
@@ -27,6 +27,9 @@
#define MT_ROM 6
#define MT_IXP2000_DEVICE 7
+#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
+#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
+
extern void create_memmap_holes(struct meminfo *);
extern void memtable_init(struct meminfo *);
extern void iotable_init(struct map_desc *, int);
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
index a8a933a..a547ee5 100644
--- a/include/asm-arm/memory.h
+++ b/include/asm-arm/memory.h
@@ -12,6 +12,16 @@
#ifndef __ASM_ARM_MEMORY_H
#define __ASM_ARM_MEMORY_H
+/*
+ * Allow for constants defined here to be used from assembly code
+ * by prepending the UL suffix only with actual C code compilation.
+ */
+#ifndef __ASSEMBLY__
+#define UL(x) (x##UL)
+#else
+#define UL(x) (x)
+#endif
+
#include <linux/config.h>
#include <linux/compiler.h>
#include <asm/arch/memory.h>
@@ -21,20 +31,20 @@
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
*/
-#define TASK_SIZE (0xbf000000UL)
-#define TASK_UNMAPPED_BASE (0x40000000UL)
+#define TASK_SIZE UL(0xbf000000)
+#define TASK_UNMAPPED_BASE UL(0x40000000)
#endif
/*
* The maximum size of a 26-bit user space task.
*/
-#define TASK_SIZE_26 (0x04000000UL)
+#define TASK_SIZE_26 UL(0x04000000)
/*
* Page offset: 3GB
*/
#ifndef PAGE_OFFSET
-#define PAGE_OFFSET (0xc0000000UL)
+#define PAGE_OFFSET UL(0xc0000000)
#endif
/*
@@ -58,6 +68,13 @@
#error Top of user space clashes with start of module space
#endif
+/*
+ * The XIP kernel gets mapped at the bottom of the module vm area.
+ * Since we use sections to map it, this macro replaces the physical address
+ * with its virtual address while keeping offset from the base section.
+ */
+#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff))
+
#ifndef __ASSEMBLY__
/*
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index 366bafb..5a0d19b 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -397,9 +397,6 @@
#define pgd_clear(pgdp) do { } while (0)
#define set_pgd(pgd,pgdp) do { } while (0)
-#define page_pte_prot(page,prot) mk_pte(page, prot)
-#define page_pte(page) mk_pte(page, __pgprot(0))
-
/* to find an entry in a page-table-directory */
#define pgd_index(addr) ((addr) >> PGDIR_SHIFT)
diff --git a/include/asm-arm/semaphore.h b/include/asm-arm/semaphore.h
index 60f33e6..71ca7d4 100644
--- a/include/asm-arm/semaphore.h
+++ b/include/asm-arm/semaphore.h
@@ -24,8 +24,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait), \
}
-#define __MUTEX_INITIALIZER(name) __SEMAPHORE_INIT(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INIT(name,count)
diff --git a/include/asm-arm/tlb.h b/include/asm-arm/tlb.h
index 9bb325c..f49bfb7 100644
--- a/include/asm-arm/tlb.h
+++ b/include/asm-arm/tlb.h
@@ -27,11 +27,7 @@
*/
struct mmu_gather {
struct mm_struct *mm;
- unsigned int freed;
unsigned int fullmm;
-
- unsigned int flushes;
- unsigned int avoided_flushes;
};
DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -39,11 +35,9 @@
static inline struct mmu_gather *
tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
{
- int cpu = smp_processor_id();
- struct mmu_gather *tlb = &per_cpu(mmu_gathers, cpu);
+ struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
tlb->mm = mm;
- tlb->freed = 0;
tlb->fullmm = full_mm_flush;
return tlb;
@@ -52,24 +46,13 @@
static inline void
tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
- struct mm_struct *mm = tlb->mm;
- unsigned long freed = tlb->freed;
- int rss = get_mm_counter(mm, rss);
-
- if (rss < freed)
- freed = rss;
- add_mm_counter(mm, rss, -freed);
-
if (tlb->fullmm)
- flush_tlb_mm(mm);
+ flush_tlb_mm(tlb->mm);
/* keep the page table cache within bounds */
check_pgt_cache();
-}
-static inline unsigned int tlb_is_full_mm(struct mmu_gather *tlb)
-{
- return tlb->fullmm;
+ put_cpu_var(mmu_gathers);
}
#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0)
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
index c49df63..d626e70 100644
--- a/include/asm-arm/unistd.h
+++ b/include/asm-arm/unistd.h
@@ -544,7 +544,6 @@
asmlinkage int sys_fork(struct pt_regs *regs);
asmlinkage int sys_vfork(struct pt_regs *regs);
asmlinkage int sys_pipe(unsigned long *fildes);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h
index f602cf5..a590250 100644
--- a/include/asm-arm26/pgtable.h
+++ b/include/asm-arm26/pgtable.h
@@ -98,8 +98,6 @@
#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
#define mk_pte(page,prot) pfn_pte(page_to_pfn(page),prot)
-#define page_pte_prot(page,prot) mk_pte(page, prot)
-#define page_pte(page) mk_pte(page, __pgprot(0))
/*
* Terminology: PGD = Page Directory, PMD = Page Middle Directory,
diff --git a/include/asm-arm26/semaphore.h b/include/asm-arm26/semaphore.h
index c1b6a1e..ccf15e7 100644
--- a/include/asm-arm26/semaphore.h
+++ b/include/asm-arm26/semaphore.h
@@ -25,9 +25,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait), \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INIT(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INIT(name,count)
diff --git a/include/asm-arm26/tlb.h b/include/asm-arm26/tlb.h
index 1316352..08ddd85 100644
--- a/include/asm-arm26/tlb.h
+++ b/include/asm-arm26/tlb.h
@@ -10,24 +10,20 @@
*/
struct mmu_gather {
struct mm_struct *mm;
- unsigned int freed;
- unsigned int fullmm;
-
- unsigned int flushes;
- unsigned int avoided_flushes;
+ unsigned int need_flush;
+ unsigned int fullmm;
};
-extern struct mmu_gather mmu_gathers[NR_CPUS];
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
static inline struct mmu_gather *
tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
{
- int cpu = smp_processor_id();
- struct mmu_gather *tlb = &mmu_gathers[cpu];
+ struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
tlb->mm = mm;
- tlb->freed = 0;
- tlb->fullmm = full_mm_flush;
+ tlb->need_flush = 0;
+ tlb->fullmm = full_mm_flush;
return tlb;
}
@@ -35,30 +31,13 @@
static inline void
tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
- struct mm_struct *mm = tlb->mm;
- unsigned long freed = tlb->freed;
- int rss = get_mm_counter(mm, rss);
-
- if (rss < freed)
- freed = rss;
- add_mm_counter(mm, rss, -freed);
-
- if (freed) {
- flush_tlb_mm(mm);
- tlb->flushes++;
- } else {
- tlb->avoided_flushes++;
- }
+ if (tlb->need_flush)
+ flush_tlb_mm(tlb->mm);
/* keep the page table cache within bounds */
check_pgt_cache();
-}
-
-static inline unsigned int
-tlb_is_full_mm(struct mmu_gather *tlb)
-{
- return tlb->fullmm;
+ put_cpu_var(mmu_gathers);
}
#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0)
@@ -71,7 +50,13 @@
} while (0)
#define tlb_end_vma(tlb,vma) do { } while (0)
-#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
+static inline void
+tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+ tlb->need_flush = 1;
+ free_page_and_swap_cache(page);
+}
+
#define pte_free_tlb(tlb,ptep) pte_free(ptep)
#define pmd_free_tlb(tlb,pmdp) pmd_free(pmdp)
diff --git a/include/asm-arm26/unistd.h b/include/asm-arm26/unistd.h
index dfa0b0c..be4c2fb 100644
--- a/include/asm-arm26/unistd.h
+++ b/include/asm-arm26/unistd.h
@@ -480,7 +480,6 @@
asmlinkage int sys_fork(struct pt_regs *regs);
asmlinkage int sys_vfork(struct pt_regs *regs);
asmlinkage int sys_pipe(unsigned long *fildes);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h
index 0b5c3fd..8eff513 100644
--- a/include/asm-cris/dma-mapping.h
+++ b/include/asm-cris/dma-mapping.h
@@ -15,14 +15,14 @@
#ifdef CONFIG_PCI
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag);
+ dma_addr_t *dma_handle, gfp_t flag);
void dma_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
#else
static inline void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- int flag)
+ gfp_t flag)
{
BUG();
return NULL;
diff --git a/include/asm-cris/semaphore.h b/include/asm-cris/semaphore.h
index 8ed7636..39faf69 100644
--- a/include/asm-cris/semaphore.h
+++ b/include/asm-cris/semaphore.h
@@ -33,9 +33,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-cris/unistd.h b/include/asm-cris/unistd.h
index 28232ad..156a34b 100644
--- a/include/asm-cris/unistd.h
+++ b/include/asm-cris/unistd.h
@@ -367,7 +367,6 @@
asmlinkage int sys_vfork(long r10, long r11, long r12, long r13,
long mof, long srp, struct pt_regs *regs);
asmlinkage int sys_pipe(unsigned long __user *fildes);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-frv/dma-mapping.h b/include/asm-frv/dma-mapping.h
index 0206ab3..5003e01 100644
--- a/include/asm-frv/dma-mapping.h
+++ b/include/asm-frv/dma-mapping.h
@@ -13,7 +13,7 @@
extern unsigned long __nongprelbss dma_coherent_mem_start;
extern unsigned long __nongprelbss dma_coherent_mem_end;
-void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, int gfp);
+void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
/*
diff --git a/include/asm-frv/pci.h b/include/asm-frv/pci.h
index b4efe5e..1168451 100644
--- a/include/asm-frv/pci.h
+++ b/include/asm-frv/pci.h
@@ -32,7 +32,7 @@
extern void pcibios_penalize_isa_irq(int irq);
#ifdef CONFIG_MMU
-extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle);
extern void consistent_free(void *vaddr);
extern void consistent_sync(void *vaddr, size_t size, int direction);
extern void consistent_sync_page(struct page *page, unsigned long offset,
diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
index 473fb4b..b247e99 100644
--- a/include/asm-frv/pgtable.h
+++ b/include/asm-frv/pgtable.h
@@ -436,8 +436,6 @@
return pte;
}
-#define page_pte(page) page_pte_prot((page), __pgprot(0))
-
/* to find an entry in a page-table-directory. */
#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
#define pgd_index_k(addr) pgd_index(addr)
diff --git a/include/asm-frv/semaphore.h b/include/asm-frv/semaphore.h
index 3935456..b183962 100644
--- a/include/asm-frv/semaphore.h
+++ b/include/asm-frv/semaphore.h
@@ -47,9 +47,6 @@
#define __SEMAPHORE_INITIALIZER(name,count) \
{ count, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) __SEM_DEBUG_INIT(name) }
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
index c20ec25..68c6fea 100644
--- a/include/asm-generic/4level-fixup.h
+++ b/include/asm-generic/4level-fixup.h
@@ -10,14 +10,9 @@
#define pud_t pgd_t
-#define pmd_alloc(mm, pud, address) \
-({ pmd_t *ret; \
- if (pgd_none(*pud)) \
- ret = __pmd_alloc(mm, pud, address); \
- else \
- ret = pmd_offset(pud, address); \
- ret; \
-})
+#define pmd_alloc(mm, pud, address) \
+ ((unlikely(pgd_none(*(pud))) && __pmd_alloc(mm, pud, address))? \
+ NULL: pmd_offset(pud, address))
#define pud_alloc(mm, pgd, address) (pgd)
#define pud_offset(pgd, start) (pgd)
diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h
index fd9de95..a7f1a55 100644
--- a/include/asm-generic/dma-mapping-broken.h
+++ b/include/asm-generic/dma-mapping-broken.h
@@ -6,7 +6,7 @@
static inline void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- int flag)
+ gfp_t flag)
{
BUG();
return NULL;
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index ff28c8b..7dca30a 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -8,7 +8,7 @@
* - update the page tables
* - inform the TLB about the new one
*
- * We hold the mm semaphore for reading and vma->vm_mm->page_table_lock.
+ * We hold the mm semaphore for reading, and the pte lock.
*
* Note: the old pte is known to not be writable, so we don't need to
* worry about dirty bits etc getting lost.
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index 7d02983..cdd4145 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -35,16 +35,13 @@
#endif
/* struct mmu_gather is an opaque type used by the mm code for passing around
- * any data needed by arch specific code for tlb_remove_page. This structure
- * can be per-CPU or per-MM as the page table lock is held for the duration of
- * TLB shootdown.
+ * any data needed by arch specific code for tlb_remove_page.
*/
struct mmu_gather {
struct mm_struct *mm;
unsigned int nr; /* set to ~0U means fast mode */
unsigned int need_flush;/* Really unmapped some ptes? */
unsigned int fullmm; /* non-zero means full mm flush */
- unsigned long freed;
struct page * pages[FREE_PTE_NR];
};
@@ -57,7 +54,7 @@
static inline struct mmu_gather *
tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
{
- struct mmu_gather *tlb = &per_cpu(mmu_gathers, smp_processor_id());
+ struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
tlb->mm = mm;
@@ -65,7 +62,6 @@
tlb->nr = num_online_cpus() > 1 ? 0U : ~0U;
tlb->fullmm = full_mm_flush;
- tlb->freed = 0;
return tlb;
}
@@ -85,28 +81,17 @@
/* tlb_finish_mmu
* Called at the end of the shootdown operation to free up any resources
- * that were required. The page table lock is still held at this point.
+ * that were required.
*/
static inline void
tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
- int freed = tlb->freed;
- struct mm_struct *mm = tlb->mm;
- int rss = get_mm_counter(mm, rss);
-
- if (rss < freed)
- freed = rss;
- add_mm_counter(mm, rss, -freed);
tlb_flush_mmu(tlb, start, end);
/* keep the page table cache within bounds */
check_pgt_cache();
-}
-static inline unsigned int
-tlb_is_full_mm(struct mmu_gather *tlb)
-{
- return tlb->fullmm;
+ put_cpu_var(mmu_gathers);
}
/* tlb_remove_page
diff --git a/include/asm-h8300/semaphore.h b/include/asm-h8300/semaphore.h
index fe6ef37..81bae2a 100644
--- a/include/asm-h8300/semaphore.h
+++ b/include/asm-h8300/semaphore.h
@@ -35,9 +35,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-h8300/unistd.h b/include/asm-h8300/unistd.h
index 56a6401..56a4a56 100644
--- a/include/asm-h8300/unistd.h
+++ b/include/asm-h8300/unistd.h
@@ -528,7 +528,6 @@
asmlinkage int sys_execve(char *name, char **argv, char **envp,
int dummy, ...);
asmlinkage int sys_pipe(unsigned long *fildes);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h
index 8c454aa..a515e2a 100644
--- a/include/asm-i386/apic.h
+++ b/include/asm-i386/apic.h
@@ -118,7 +118,8 @@
extern void disable_timer_nmi_watchdog(void);
extern void enable_timer_nmi_watchdog(void);
extern void nmi_watchdog_tick (struct pt_regs * regs);
-extern int APIC_init_uniprocessor (void);
+extern int APIC_init(void);
+extern void APIC_late_time_init(void);
extern void disable_APIC_timer(void);
extern void enable_APIC_timer(void);
diff --git a/include/asm-i386/desc.h b/include/asm-i386/desc.h
index 6df1a53..29b851a 100644
--- a/include/asm-i386/desc.h
+++ b/include/asm-i386/desc.h
@@ -17,6 +17,8 @@
extern struct desc_struct cpu_gdt_table[GDT_ENTRIES];
DECLARE_PER_CPU(struct desc_struct, cpu_gdt_table[GDT_ENTRIES]);
+#define get_cpu_gdt_table(_cpu) (per_cpu(cpu_gdt_table,_cpu))
+
DECLARE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
struct Xgt_desc_struct {
@@ -60,7 +62,7 @@
static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, void *addr)
{
- _set_tssldt_desc(&per_cpu(cpu_gdt_table, cpu)[entry], (int)addr,
+ _set_tssldt_desc(&get_cpu_gdt_table(cpu)[entry], (int)addr,
offsetof(struct tss_struct, __cacheline_filler) - 1, 0x89);
}
@@ -68,7 +70,7 @@
static inline void set_ldt_desc(unsigned int cpu, void *addr, unsigned int size)
{
- _set_tssldt_desc(&per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_LDT], (int)addr, ((size << 3)-1), 0x82);
+ _set_tssldt_desc(&get_cpu_gdt_table(cpu)[GDT_ENTRY_LDT], (int)addr, ((size << 3)-1), 0x82);
}
#define LDT_entry_a(info) \
@@ -109,7 +111,7 @@
static inline void load_TLS(struct thread_struct *t, unsigned int cpu)
{
-#define C(i) per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i]
+#define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i]
C(0); C(1); C(2);
#undef C
}
diff --git a/include/asm-i386/hw_irq.h b/include/asm-i386/hw_irq.h
index 622815b..9139b89 100644
--- a/include/asm-i386/hw_irq.h
+++ b/include/asm-i386/hw_irq.h
@@ -55,6 +55,7 @@
void FASTCALL(send_IPI_self(int vector));
void init_VISWS_APIC_irqs(void);
void setup_IO_APIC(void);
+void IO_APIC_late_time_init(void);
void disable_IO_APIC(void);
void print_IO_APIC(void);
int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
diff --git a/include/asm-i386/mach-default/smpboot_hooks.h b/include/asm-i386/mach-default/smpboot_hooks.h
index 7f45f63..d7c70c1 100644
--- a/include/asm-i386/mach-default/smpboot_hooks.h
+++ b/include/asm-i386/mach-default/smpboot_hooks.h
@@ -1,11 +1,6 @@
/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
* which needs to alter them. */
-static inline void smpboot_clear_io_apic_irqs(void)
-{
- io_apic_irqs = 0;
-}
-
static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
{
CMOS_WRITE(0xa, 0xf);
@@ -32,13 +27,3 @@
*((volatile long *) phys_to_virt(0x467)) = 0;
}
-
-static inline void smpboot_setup_io_apic(void)
-{
- /*
- * Here we can be sure that there is an IO-APIC in the system. Let's
- * go and set it up:
- */
- if (!skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
-}
diff --git a/include/asm-i386/mach-es7000/mach_mpparse.h b/include/asm-i386/mach-es7000/mach_mpparse.h
index 28a84f6..4a0637a 100644
--- a/include/asm-i386/mach-es7000/mach_mpparse.h
+++ b/include/asm-i386/mach-es7000/mach_mpparse.h
@@ -16,7 +16,7 @@
extern int parse_unisys_oem (char *oemptr);
extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void setup_unisys();
+extern void setup_unisys(void);
static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
diff --git a/include/asm-i386/mach-summit/mach_mpparse.h b/include/asm-i386/mach-summit/mach_mpparse.h
index 2b9e6d5..1cce2b9 100644
--- a/include/asm-i386/mach-summit/mach_mpparse.h
+++ b/include/asm-i386/mach-summit/mach_mpparse.h
@@ -22,7 +22,6 @@
{
}
-extern int usb_early_handoff;
static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
{
@@ -32,7 +31,6 @@
|| !strncmp(productid, "RUTHLESS SMP", 12))){
use_cyclone = 1; /*enable cyclone-timer*/
setup_summit();
- usb_early_handoff = 1;
return 1;
}
return 0;
@@ -46,7 +44,6 @@
|| !strncmp(oem_table_id, "EXA", 3))){
use_cyclone = 1; /*enable cyclone-timer*/
setup_summit();
- usb_early_handoff = 1;
return 1;
}
return 0;
diff --git a/include/asm-i386/mach-visws/smpboot_hooks.h b/include/asm-i386/mach-visws/smpboot_hooks.h
index d926471..14d8e03 100644
--- a/include/asm-i386/mach-visws/smpboot_hooks.h
+++ b/include/asm-i386/mach-visws/smpboot_hooks.h
@@ -11,14 +11,7 @@
/* for visws do nothing for any of these */
-static inline void smpboot_clear_io_apic_irqs(void)
-{
-}
-
static inline void smpboot_restore_warm_reset_vector(void)
{
}
-static inline void smpboot_setup_io_apic(void)
-{
-}
diff --git a/include/asm-i386/mmzone.h b/include/asm-i386/mmzone.h
index 348fe3a..620a906 100644
--- a/include/asm-i386/mmzone.h
+++ b/include/asm-i386/mmzone.h
@@ -88,12 +88,6 @@
__pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
})
-#define local_mapnr(kvaddr) \
-({ \
- unsigned long __pfn = __pa(kvaddr) >> PAGE_SHIFT; \
- (__pfn - node_start_pfn(pfn_to_nid(__pfn))); \
-})
-
/* XXX: FIXME -- wli */
#define kern_addr_valid(kaddr) (0)
diff --git a/include/asm-i386/pgtable-2level.h b/include/asm-i386/pgtable-2level.h
index fa07bd6..74ef721 100644
--- a/include/asm-i386/pgtable-2level.h
+++ b/include/asm-i386/pgtable-2level.h
@@ -26,11 +26,6 @@
#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
-
-#define pmd_page_kernel(pmd) \
-((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-
/*
* All present user pages are user-executable:
*/
diff --git a/include/asm-i386/pgtable-3level.h b/include/asm-i386/pgtable-3level.h
index 2e3f4a3..f1a8b45 100644
--- a/include/asm-i386/pgtable-3level.h
+++ b/include/asm-i386/pgtable-3level.h
@@ -74,11 +74,6 @@
*/
static inline void pud_clear (pud_t * pud) { }
-#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
-
-#define pmd_page_kernel(pmd) \
-((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-
#define pud_page(pud) \
((struct page *) __va(pud_val(pud) & PAGE_MASK))
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
index d101ac4..03f3c8a 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-i386/pgtable.h
@@ -203,7 +203,8 @@
#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-#define pmd_none(x) (!pmd_val(x))
+/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
+#define pmd_none(x) (!(unsigned long)pmd_val(x))
#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
@@ -322,8 +323,6 @@
return pte;
}
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
-
#define pmd_large(pmd) \
((pmd_val(pmd) & (_PAGE_PSE|_PAGE_PRESENT)) == (_PAGE_PSE|_PAGE_PRESENT))
@@ -368,6 +367,11 @@
#define pte_offset_kernel(dir, address) \
((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address))
+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+
+#define pmd_page_kernel(pmd) \
+ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
/*
* Helper function that returns the kernel pagetable entry controlling
* the virtual address 'address'. NULL means no pagetable entry present.
diff --git a/include/asm-i386/rwsem.h b/include/asm-i386/rwsem.h
index 7625a67..be4ab85 100644
--- a/include/asm-i386/rwsem.h
+++ b/include/asm-i386/rwsem.h
@@ -284,5 +284,10 @@
return tmp+delta;
}
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
#endif /* __KERNEL__ */
#endif /* _I386_RWSEM_H */
diff --git a/include/asm-i386/semaphore.h b/include/asm-i386/semaphore.h
index ea563da..6a42b21 100644
--- a/include/asm-i386/semaphore.h
+++ b/include/asm-i386/semaphore.h
@@ -55,9 +55,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h
index acd5c26..97d52ac 100644
--- a/include/asm-i386/system.h
+++ b/include/asm-i386/system.h
@@ -167,6 +167,8 @@
#define __xg(x) ((struct __xchg_dummy *)(x))
+#ifdef CONFIG_X86_CMPXCHG64
+
/*
* The semantics of XCHGCMP8B are a bit strange, this is why
* there is a loop and the loading of %%eax and %%edx has to
@@ -221,6 +223,8 @@
__set_64bit(ptr, (unsigned int)(value), (unsigned int)((value)>>32ULL) ) : \
__set_64bit(ptr, ll_low(value), ll_high(value)) )
+#endif
+
/*
* Note: no "lock" prefix even on SMP: xchg always implies lock anyway
* Note 2: xchg has side effect, so that attribute volatile is necessary,
@@ -259,7 +263,6 @@
#ifdef CONFIG_X86_CMPXCHG
#define __HAVE_ARCH_CMPXCHG 1
-#endif
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
unsigned long new, int size)
@@ -275,13 +278,13 @@
case 2:
__asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
: "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
: "memory");
return prev;
case 4:
__asm__ __volatile__(LOCK_PREFIX "cmpxchgl %1,%2"
: "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
: "memory");
return prev;
}
@@ -291,6 +294,30 @@
#define cmpxchg(ptr,o,n)\
((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
(unsigned long)(n),sizeof(*(ptr))))
+
+#endif
+
+#ifdef CONFIG_X86_CMPXCHG64
+
+static inline unsigned long long __cmpxchg64(volatile void *ptr, unsigned long long old,
+ unsigned long long new)
+{
+ unsigned long long prev;
+ __asm__ __volatile__(LOCK_PREFIX "cmpxchg8b %3"
+ : "=A"(prev)
+ : "b"((unsigned long)new),
+ "c"((unsigned long)(new >> 32)),
+ "m"(*__xg(ptr)),
+ "0"(old)
+ : "memory");
+ return prev;
+}
+
+#define cmpxchg64(ptr,o,n)\
+ ((__typeof__(*(ptr)))__cmpxchg64((ptr),(unsigned long long)(o),\
+ (unsigned long long)(n)))
+
+#endif
#ifdef __KERNEL__
struct alt_instr {
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index fbaf90a..0f92e78 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -448,7 +448,6 @@
asmlinkage int sys_fork(struct pt_regs regs);
asmlinkage int sys_vfork(struct pt_regs regs);
asmlinkage int sys_pipe(unsigned long __user *fildes);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
asmlinkage long sys_iopl(unsigned long unused);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h
index 79e89a7..ca5ea99 100644
--- a/include/asm-ia64/machvec.h
+++ b/include/asm-ia64/machvec.h
@@ -26,7 +26,7 @@
typedef void ia64_mv_irq_init_t (void);
typedef void ia64_mv_send_ipi_t (int, int, int, int);
typedef void ia64_mv_timer_interrupt_t (int, void *, struct pt_regs *);
-typedef void ia64_mv_global_tlb_purge_t (unsigned long, unsigned long, unsigned long);
+typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long);
typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *);
typedef unsigned int ia64_mv_local_vector_to_irq (u8);
typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *);
@@ -37,7 +37,7 @@
/* DMA-mapping interface: */
typedef void ia64_mv_dma_init (void);
-typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, int);
+typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, gfp_t);
typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t);
typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int);
typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int);
diff --git a/include/asm-ia64/machvec_hpzx1.h b/include/asm-ia64/machvec_hpzx1.h
index daafe50..e90daf9 100644
--- a/include/asm-ia64/machvec_hpzx1.h
+++ b/include/asm-ia64/machvec_hpzx1.h
@@ -1,8 +1,7 @@
#ifndef _ASM_IA64_MACHVEC_HPZX1_h
#define _ASM_IA64_MACHVEC_HPZX1_h
-extern ia64_mv_setup_t dig_setup;
-extern ia64_mv_setup_t sba_setup;
+extern ia64_mv_setup_t dig_setup;
extern ia64_mv_dma_alloc_coherent sba_alloc_coherent;
extern ia64_mv_dma_free_coherent sba_free_coherent;
extern ia64_mv_dma_map_single sba_map_single;
@@ -19,15 +18,15 @@
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "hpzx1"
-#define platform_setup sba_setup
-#define platform_dma_init machvec_noop
-#define platform_dma_alloc_coherent sba_alloc_coherent
-#define platform_dma_free_coherent sba_free_coherent
-#define platform_dma_map_single sba_map_single
-#define platform_dma_unmap_single sba_unmap_single
-#define platform_dma_map_sg sba_map_sg
-#define platform_dma_unmap_sg sba_unmap_sg
+#define platform_name "hpzx1"
+#define platform_setup dig_setup
+#define platform_dma_init machvec_noop
+#define platform_dma_alloc_coherent sba_alloc_coherent
+#define platform_dma_free_coherent sba_free_coherent
+#define platform_dma_map_single sba_map_single
+#define platform_dma_unmap_single sba_unmap_single
+#define platform_dma_map_sg sba_map_sg
+#define platform_dma_unmap_sg sba_unmap_sg
#define platform_dma_sync_single_for_cpu machvec_dma_sync_single
#define platform_dma_sync_sg_for_cpu machvec_dma_sync_sg
#define platform_dma_sync_single_for_device machvec_dma_sync_single
diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/include/asm-ia64/machvec_hpzx1_swiotlb.h
index 9924b1b..f00a34a 100644
--- a/include/asm-ia64/machvec_hpzx1_swiotlb.h
+++ b/include/asm-ia64/machvec_hpzx1_swiotlb.h
@@ -2,7 +2,6 @@
#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
extern ia64_mv_setup_t dig_setup;
-extern ia64_mv_dma_init hwsw_init;
extern ia64_mv_dma_alloc_coherent hwsw_alloc_coherent;
extern ia64_mv_dma_free_coherent hwsw_free_coherent;
extern ia64_mv_dma_map_single hwsw_map_single;
@@ -26,7 +25,7 @@
#define platform_name "hpzx1_swiotlb"
#define platform_setup dig_setup
-#define platform_dma_init hwsw_init
+#define platform_dma_init machvec_noop
#define platform_dma_alloc_coherent hwsw_alloc_coherent
#define platform_dma_free_coherent hwsw_free_coherent
#define platform_dma_map_single hwsw_map_single
diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h
index 1590dc6..46501b0 100644
--- a/include/asm-ia64/meminit.h
+++ b/include/asm-ia64/meminit.h
@@ -16,10 +16,11 @@
* - initrd (optional)
* - command line string
* - kernel code & data
+ * - Kernel memory map built from EFI memory map
*
* More could be added if necessary
*/
-#define IA64_MAX_RSVD_REGIONS 5
+#define IA64_MAX_RSVD_REGIONS 6
struct rsvd_region {
unsigned long start; /* virtual address of beginning of element */
@@ -33,6 +34,7 @@
extern void reserve_memory (void);
extern void find_initrd (void);
extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
+extern void efi_memmap_init(unsigned long *, unsigned long *);
/*
* For rounding an address to the next IA64_GRANULE_SIZE or order
@@ -41,7 +43,7 @@
#define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
#else
# define call_pernode_memory(start, len, func) (*func)(start, len, 0)
diff --git a/include/asm-ia64/mmzone.h b/include/asm-ia64/mmzone.h
index d32f51e..34efe88 100644
--- a/include/asm-ia64/mmzone.h
+++ b/include/asm-ia64/mmzone.h
@@ -15,7 +15,7 @@
#include <asm/page.h>
#include <asm/meminit.h>
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
static inline int pfn_to_nid(unsigned long pfn)
{
@@ -31,6 +31,10 @@
#endif
}
+#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+extern int early_pfn_to_nid(unsigned long pfn);
+#endif
+
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
@@ -39,8 +43,8 @@
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
#endif
-#else /* CONFIG_DISCONTIGMEM */
+#else /* CONFIG_NUMA */
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
-#endif /* CONFIG_DISCONTIGMEM */
+#endif /* CONFIG_NUMA */
#endif /* _ASM_IA64_MMZONE_H */
diff --git a/include/asm-ia64/nodedata.h b/include/asm-ia64/nodedata.h
index 6b0f3ed..9978c7c 100644
--- a/include/asm-ia64/nodedata.h
+++ b/include/asm-ia64/nodedata.h
@@ -17,7 +17,7 @@
#include <asm/percpu.h>
#include <asm/mmzone.h>
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
/*
* Node Data. One of these structures is located on each node of a NUMA system.
@@ -47,6 +47,6 @@
*/
#define NODE_DATA(nid) (local_node_data->pg_data_ptrs[nid])
-#endif /* CONFIG_DISCONTIGMEM */
+#endif /* CONFIG_NUMA */
#endif /* _ASM_IA64_NODEDATA_H */
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
index 9edffad..ef436b9 100644
--- a/include/asm-ia64/page.h
+++ b/include/asm-ia64/page.h
@@ -102,15 +102,15 @@
#ifdef CONFIG_VIRTUAL_MEM_MAP
extern int ia64_pfn_valid (unsigned long pfn);
-#else
+#elif defined(CONFIG_FLATMEM)
# define ia64_pfn_valid(pfn) 1
#endif
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
# define pfn_valid(pfn) (((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
# define page_to_pfn(page) ((unsigned long) (page - mem_map))
# define pfn_to_page(pfn) (mem_map + (pfn))
-#else
+#elif defined(CONFIG_DISCONTIGMEM)
extern struct page *vmem_map;
extern unsigned long max_low_pfn;
# define pfn_valid(pfn) (((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
index 3339c7b..21e32a0 100644
--- a/include/asm-ia64/pgtable.h
+++ b/include/asm-ia64/pgtable.h
@@ -236,9 +236,6 @@
#define pte_modify(_pte, newprot) \
(__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK)))
-#define page_pte_prot(page,prot) mk_pte(page, prot)
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
-
#define pte_none(pte) (!pte_val(pte))
#define pte_present(pte) (pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE))
#define pte_clear(mm,addr,pte) (pte_val(*(pte)) = 0UL)
diff --git a/include/asm-ia64/rwsem.h b/include/asm-ia64/rwsem.h
index e18b5ab..1327c91 100644
--- a/include/asm-ia64/rwsem.h
+++ b/include/asm-ia64/rwsem.h
@@ -186,4 +186,9 @@
#define rwsem_atomic_add(delta, sem) atomic64_add(delta, (atomic64_t *)(&(sem)->count))
#define rwsem_atomic_update(delta, sem) atomic64_add_return(delta, (atomic64_t *)(&(sem)->count))
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
#endif /* _ASM_IA64_RWSEM_H */
diff --git a/include/asm-ia64/semaphore.h b/include/asm-ia64/semaphore.h
index 3a2f0f3..bb89062 100644
--- a/include/asm-ia64/semaphore.h
+++ b/include/asm-ia64/semaphore.h
@@ -24,8 +24,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h
index ab827d2..1a3831c 100644
--- a/include/asm-ia64/sn/arch.h
+++ b/include/asm-ia64/sn/arch.h
@@ -18,6 +18,32 @@
#include <asm/sn/sn_cpuid.h>
/*
+ * This is the maximum number of NUMALINK nodes that can be part of a single
+ * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
+ * remote partitions are NOT included in this number.
+ * The number of compact nodes cannot exceed size of a coherency domain.
+ * The purpose of this define is to specify a node count that includes
+ * all C/M/TIO nodes in an SSI system.
+ *
+ * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
+ *
+ * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
+ * to ACPI3.0, this limit will be removed. The notion of "compact nodes"
+ * should be deleted and TIOs should be included in MAX_NUMNODES.
+ */
+#define MAX_COMPACT_NODES 512
+
+/*
+ * Maximum number of nodes in all partitions and in all coherency domains.
+ * This is the total number of nodes accessible in the numalink fabric. It
+ * includes all C & M bricks, plus all TIOs.
+ *
+ * This value is also the value of the maximum number of NASIDs in the numalink
+ * fabric.
+ */
+#define MAX_NUMALINK_NODES 16384
+
+/*
* The following defines attributes of the HUB chip. These attributes are
* frequently referenced. They are kept in the per-cpu data areas of each cpu.
* They are kept together in a struct to minimize cache misses.
@@ -41,15 +67,6 @@
/*
- * This is the maximum number of nodes that can be part of a kernel.
- * Effectively, it's the maximum number of compact node ids (cnodeid_t).
- * This is not necessarily the same as MAX_NASIDS.
- */
-#define MAX_COMPACT_NODES 2048
-#define CPUS_PER_NODE 4
-
-
-/*
* Compact node ID to nasid mappings kept in the per-cpu data areas of each
* cpu.
*/
@@ -57,7 +74,6 @@
#define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0]))
-
extern u8 sn_partition_id;
extern u8 sn_system_size;
extern u8 sn_sharing_domain_size;
diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h
index 4220973..41c73a7 100644
--- a/include/asm-ia64/sn/io.h
+++ b/include/asm-ia64/sn/io.h
@@ -14,7 +14,7 @@
extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
extern void __sn_mmiowb(void); /* Forward definition */
-extern int numionodes;
+extern int num_cnodes;
#define __sn_mf_a() ia64_mfa()
@@ -36,6 +36,15 @@
#define __sn_readq_relaxed ___sn_readq_relaxed
/*
+ * Convenience macros for setting/clearing bits using the above accessors
+ */
+
+#define __sn_setq_relaxed(addr, val) \
+ writeq((__sn_readq_relaxed(addr) | (val)), (addr))
+#define __sn_clrq_relaxed(addr, val) \
+ writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
+
+/*
* The following routines are SN Platform specific, called when
* a reference is made to inX/outX set macros. SN Platform
* inX set of macros ensures that Posted DMA writes on the
diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h
index 9f920c7..bcbf209 100644
--- a/include/asm-ia64/sn/klconfig.h
+++ b/include/asm-ia64/sn/klconfig.h
@@ -208,19 +208,6 @@
klconf_off_t brd_next_same; /* Next BOARD with same nasid */
} lboard_t;
-#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
-#define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off))
-#define KLCF_NEXT(_brd) \
- ((_brd)->brd_next_same ? \
- (NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL)
-#define KLCF_NEXT_ANY(_brd) \
- ((_brd)->brd_next_any ? \
- (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL)
-#define KLCF_COMP(_brd, _ndx) \
- ((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \
- (NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)])))
-
-
/*
* Generic info structure. This stores common info about a
* component.
@@ -249,24 +236,11 @@
} klinfo_t ;
-static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type)
+static inline lboard_t *find_lboard_next(lboard_t * brd)
{
- /* Search all boards stored on this node. */
-
- while (start) {
- if (start->brd_type == brd_type)
- return start;
- start = KLCF_NEXT_ANY(start);
- }
- /* Didn't find it. */
- return (lboard_t *) NULL;
+ if (brd && brd->brd_next_any)
+ return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
+ return NULL;
}
-
-/* external declarations of Linux kernel functions. */
-
-extern lboard_t *root_lboard[];
-extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
-extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
-
#endif /* _ASM_IA64_SN_KLCONFIG_H */
diff --git a/include/asm-ia64/sn/l1.h b/include/asm-ia64/sn/l1.h
index 2e5f0aa..e3b8191 100644
--- a/include/asm-ia64/sn/l1.h
+++ b/include/asm-ia64/sn/l1.h
@@ -35,4 +35,16 @@
#define L1_BRICKTYPE_ATHENA 0x2b /* + */
#define L1_BRICKTYPE_DAYTONA 0x7a /* z */
+/* board type response codes */
+#define L1_BOARDTYPE_IP69 0x0100 /* CA */
+#define L1_BOARDTYPE_IP63 0x0200 /* CB */
+#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */
+#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */
+#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */
+#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */
+#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */
+#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */
+#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */
+
+
#endif /* _ASM_IA64_SN_L1_H */
diff --git a/include/asm-ia64/sn/nodepda.h b/include/asm-ia64/sn/nodepda.h
index 47bb810..6f6d69e 100644
--- a/include/asm-ia64/sn/nodepda.h
+++ b/include/asm-ia64/sn/nodepda.h
@@ -55,7 +55,6 @@
*/
struct phys_cpuid phys_cpuid[NR_CPUS];
spinlock_t ptc_lock ____cacheline_aligned_in_smp;
- spinlock_t bist_lock;
};
typedef struct nodepda_s nodepda_t;
diff --git a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h
index d2c1d34..749deb2 100644
--- a/include/asm-ia64/sn/sn_cpuid.h
+++ b/include/asm-ia64/sn/sn_cpuid.h
@@ -105,7 +105,6 @@
#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid)
#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode)
#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice)
-#define cpuid_to_cnodeid(cpuid) (physical_node_map[cpuid_to_nasid(cpuid)])
/*
@@ -113,8 +112,6 @@
* of potentially large tables.
*/
extern int nasid_slice_to_cpuid(int, int);
-#define nasid_slice_to_cpu_physical_id(nasid, slice) \
- cpu_physical_id(nasid_slice_to_cpuid(nasid, slice))
/*
* cnodeid_to_nasid - convert a cnodeid to a NASID
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
index fea35b3..3f7564d 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -47,6 +47,7 @@
#define SN_SAL_CONSOLE_PUTB 0x02000028
#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a
#define SN_SAL_CONSOLE_READC 0x0200002b
+#define SN_SAL_SYSCTL_OP 0x02000030
#define SN_SAL_SYSCTL_MODID_GET 0x02000031
#define SN_SAL_SYSCTL_GET 0x02000032
#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033
@@ -67,7 +68,7 @@
#define SN_SAL_IOIF_INTERRUPT 0x0200004a
#define SN_SAL_HWPERF_OP 0x02000050 // lock
#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051
-
+#define SN_SAL_IOIF_PCI_SAFE 0x02000052
#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053
#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054
#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055
@@ -101,6 +102,13 @@
#define SAL_INTR_FREE 2
/*
+ * operations available on the generic SN_SAL_SYSCTL_OP
+ * runtime service
+ */
+#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */
+#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */
+
+/*
* IRouter (i.e. generalized system controller) operations
*/
#define SAL_IROUTER_OPEN 0 /* open a subchannel */
@@ -198,26 +206,16 @@
return ret_stuff.v0;
}
-static inline char *
+static inline void *
ia64_sn_get_klconfig_addr(nasid_t nasid)
{
struct ia64_sal_retval ret_stuff;
- int cnodeid;
- cnodeid = nasid_to_cnodeid(nasid);
ret_stuff.status = 0;
ret_stuff.v0 = 0;
ret_stuff.v1 = 0;
ret_stuff.v2 = 0;
SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
-
- /*
- * We should panic if a valid cnode nasid does not produce
- * a klconfig address.
- */
- if (ret_stuff.status != 0) {
- panic("ia64_sn_get_klconfig_addr: Returned error %lx\n", ret_stuff.status);
- }
return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
}
@@ -694,12 +692,10 @@
unsigned long irq_flags;
cnodeid = nasid_to_cnodeid(get_node_number(paddr));
- // spin_lock(&NODEPDA(cnodeid)->bist_lock);
local_irq_save(irq_flags);
ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
(u64)nasid_array, perms, 0, 0, 0);
local_irq_restore(irq_flags);
- // spin_unlock(&NODEPDA(cnodeid)->bist_lock);
return ret_stuff.status;
}
#define SN_MEMPROT_ACCESS_CLASS_0 0x14a080
@@ -873,6 +869,41 @@
return (int) rv.v0;
}
+/*
+ * Ask the system controller on the specified nasid to reset
+ * the CX corelet clock. Only valid on TIO nodes.
+ */
+static inline int
+ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
+ nasid, 0, 0, 0, 0, 0);
+ if (rv.status != 0)
+ return (int)rv.status;
+ if (rv.v0 != 0)
+ return (int)rv.v0;
+
+ return 0;
+}
+
+/*
+ * Get the associated ioboard type for a given nasid.
+ */
+static inline int
+ia64_sn_sysctl_ioboard_get(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
+ nasid, 0, 0, 0, 0, 0);
+ if (rv.v0 != 0)
+ return (int)rv.v0;
+ if (rv.v1 != 0)
+ return (int)rv.v1;
+
+ return 0;
+}
+
/**
* ia64_sn_get_fit_compt - read a FIT entry from the PROM header
* @nasid: NASID of node to read
diff --git a/include/asm-ia64/sn/tioca_provider.h b/include/asm-ia64/sn/tioca_provider.h
index 5ccec60..b532ef6 100644
--- a/include/asm-ia64/sn/tioca_provider.h
+++ b/include/asm-ia64/sn/tioca_provider.h
@@ -182,11 +182,11 @@
* touch every CL aligned GART entry.
*/
- ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
- ca_base->ca_control2 |= CA_GART_FLUSH_TLB;
- ca_base->ca_control2 |=
- (0x2ull << CA_GART_MEM_PARAM_SHFT);
- tmp = ca_base->ca_control2;
+ __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+ __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
+ __sn_setq_relaxed(&ca_base->ca_control2,
+ (0x2ull << CA_GART_MEM_PARAM_SHFT));
+ tmp = __sn_readq_relaxed(&ca_base->ca_control2);
}
return;
@@ -196,8 +196,8 @@
* Gart in uncached mode ... need an explicit flush.
*/
- ca_base->ca_control2 |= CA_GART_FLUSH_TLB;
- tmp = ca_base->ca_control2;
+ __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
+ tmp = __sn_readq_relaxed(&ca_base->ca_control2);
}
extern uint32_t tioca_gart_found;
diff --git a/include/asm-ia64/sn/tiocx.h b/include/asm-ia64/sn/tiocx.h
index c5447a5..5699e75 100644
--- a/include/asm-ia64/sn/tiocx.h
+++ b/include/asm-ia64/sn/tiocx.h
@@ -19,6 +19,7 @@
struct cx_dev {
struct cx_id_s cx_id;
+ int bt; /* board/blade type */
void *soft; /* driver specific */
struct hubdev_info *hubdev;
struct device dev;
@@ -59,7 +60,7 @@
extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int);
extern void tiocx_irq_free(struct sn_irq_info *);
extern int cx_device_unregister(struct cx_dev *);
-extern int cx_device_register(nasid_t, int, int, struct hubdev_info *);
+extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
extern int cx_driver_unregister(struct cx_drv *);
extern int cx_driver_register(struct cx_drv *);
extern uint64_t tiocx_dma_addr(uint64_t addr);
diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h
index 1df1c9f..49faf8f 100644
--- a/include/asm-ia64/sn/xp.h
+++ b/include/asm-ia64/sn/xp.h
@@ -49,7 +49,7 @@
* C-brick nasids, thus the need for bitmaps which don't account for
* odd-numbered (non C-brick) nasids.
*/
-#define XP_MAX_PHYSNODE_ID (MAX_PHYSNODE_ID / 2)
+#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2)
#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8)
#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64)
@@ -217,7 +217,17 @@
xpcInvalidPartid, /* 42: invalid partition ID */
xpcLocalPartid, /* 43: local partition ID */
- xpcUnknownReason /* 44: unknown reason -- must be last in list */
+ xpcOtherGoingDown, /* 44: other side going down, reason unknown */
+ xpcSystemGoingDown, /* 45: system is going down, reason unknown */
+ xpcSystemHalt, /* 46: system is being halted */
+ xpcSystemReboot, /* 47: system is being rebooted */
+ xpcSystemPoweroff, /* 48: system is being powered off */
+
+ xpcDisconnecting, /* 49: channel disconnecting (closing) */
+
+ xpcOpenCloseError, /* 50: channel open/close protocol error */
+
+ xpcUnknownReason /* 51: unknown reason -- must be last in list */
};
@@ -342,7 +352,7 @@
*
* The 'func' field points to the function to call when aynchronous
* notification is required for such events as: a connection established/lost,
- * or an incomming message received, or an error condition encountered. A
+ * or an incoming message received, or an error condition encountered. A
* non-NULL 'func' field indicates that there is an active registration for
* the channel.
*/
diff --git a/include/asm-ia64/sparsemem.h b/include/asm-ia64/sparsemem.h
new file mode 100644
index 0000000..67a7c40
--- /dev/null
+++ b/include/asm-ia64/sparsemem.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_IA64_SPARSEMEM_H
+#define _ASM_IA64_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * SECTION_SIZE_BITS 2^N: how big each section will be
+ * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space
+ */
+
+#define SECTION_SIZE_BITS (30)
+#define MAX_PHYSMEM_BITS (50)
+#ifdef CONFIG_FORCE_MAX_ZONEORDER
+#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#undef SECTION_SIZE_BITS
+#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
+#endif
+#endif
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _ASM_IA64_SPARSEMEM_H */
diff --git a/include/asm-ia64/tlb.h b/include/asm-ia64/tlb.h
index 3a9a6d1..834370b 100644
--- a/include/asm-ia64/tlb.h
+++ b/include/asm-ia64/tlb.h
@@ -60,7 +60,6 @@
unsigned int nr; /* == ~0U => fast mode */
unsigned char fullmm; /* non-zero means full mm flush */
unsigned char need_flush; /* really unmapped some PTEs? */
- unsigned long freed; /* number of pages freed */
unsigned long start_addr;
unsigned long end_addr;
struct page *pages[FREE_PTE_NR];
@@ -129,7 +128,7 @@
static inline struct mmu_gather *
tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush)
{
- struct mmu_gather *tlb = &__get_cpu_var(mmu_gathers);
+ struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
tlb->mm = mm;
/*
@@ -147,25 +146,17 @@
*/
tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
tlb->fullmm = full_mm_flush;
- tlb->freed = 0;
tlb->start_addr = ~0UL;
return tlb;
}
/*
* Called at the end of the shootdown operation to free up any resources that were
- * collected. The page table lock is still held at this point.
+ * collected.
*/
static inline void
tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
- unsigned long freed = tlb->freed;
- struct mm_struct *mm = tlb->mm;
- unsigned long rss = get_mm_counter(mm, rss);
-
- if (rss < freed)
- freed = rss;
- add_mm_counter(mm, rss, -freed);
/*
* Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and
* tlb->end_addr.
@@ -174,12 +165,8 @@
/* keep the page table cache within bounds */
check_pgt_cache();
-}
-static inline unsigned int
-tlb_is_full_mm(struct mmu_gather *tlb)
-{
- return tlb->fullmm;
+ put_cpu_var(mmu_gathers);
}
/*
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index 3a0c695..6d96a67 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -383,8 +383,6 @@
long sys_execve(char __user *filename, char __user * __user *argv,
char __user * __user *envp, struct pt_regs *regs);
asmlinkage long sys_pipe(void);
-asmlinkage long sys_ptrace(long request, pid_t pid,
- unsigned long addr, unsigned long data);
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
struct sigaction __user *oact,
diff --git a/include/asm-m32r/dma-mapping.h b/include/asm-m32r/dma-mapping.h
index 3a2db28..a7fa030 100644
--- a/include/asm-m32r/dma-mapping.h
+++ b/include/asm-m32r/dma-mapping.h
@@ -8,7 +8,7 @@
static inline void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- int flag)
+ gfp_t flag)
{
return (void *)NULL;
}
diff --git a/include/asm-m32r/mmzone.h b/include/asm-m32r/mmzone.h
index d58878e..adc7970 100644
--- a/include/asm-m32r/mmzone.h
+++ b/include/asm-m32r/mmzone.h
@@ -21,12 +21,6 @@
__pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \
})
-#define local_mapnr(kvaddr) \
-({ \
- unsigned long __pfn = __pa(kvaddr) >> PAGE_SHIFT; \
- (__pfn - node_start_pfn(pfn_to_nid(__pfn))); \
-})
-
#define pfn_to_page(pfn) \
({ \
unsigned long __pfn = pfn; \
diff --git a/include/asm-m32r/pgtable.h b/include/asm-m32r/pgtable.h
index 388e5ee..1cd5fd4 100644
--- a/include/asm-m32r/pgtable.h
+++ b/include/asm-m32r/pgtable.h
@@ -324,8 +324,6 @@
return pte;
}
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
-
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
diff --git a/include/asm-m32r/semaphore.h b/include/asm-m32r/semaphore.h
index 53e3c60..bf447c5 100644
--- a/include/asm-m32r/semaphore.h
+++ b/include/asm-m32r/semaphore.h
@@ -32,9 +32,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-m32r/thread_info.h b/include/asm-m32r/thread_info.h
index 7a6be77..0f58936 100644
--- a/include/asm-m32r/thread_info.h
+++ b/include/asm-m32r/thread_info.h
@@ -95,7 +95,7 @@
}
/* thread information allocation */
-#if CONFIG_DEBUG_STACK_USAGE
+#ifdef CONFIG_DEBUG_STACK_USAGE
#define alloc_thread_info(tsk) \
({ \
struct thread_info *ret; \
diff --git a/include/asm-m32r/unistd.h b/include/asm-m32r/unistd.h
index 8552d8f..ac399e1 100644
--- a/include/asm-m32r/unistd.h
+++ b/include/asm-m32r/unistd.h
@@ -452,7 +452,6 @@
asmlinkage int sys_fork(struct pt_regs regs);
asmlinkage int sys_vfork(struct pt_regs regs);
asmlinkage int sys_pipe(unsigned long __user *fildes);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-m68k/semaphore.h b/include/asm-m68k/semaphore.h
index ab94cf3..fd4c7cc 100644
--- a/include/asm-m68k/semaphore.h
+++ b/include/asm-m68k/semaphore.h
@@ -36,9 +36,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-m68k/sun3xflop.h b/include/asm-m68k/sun3xflop.h
index 1ed3b78..fda1ecc 100644
--- a/include/asm-m68k/sun3xflop.h
+++ b/include/asm-m68k/sun3xflop.h
@@ -27,10 +27,8 @@
/* We don't need no stinkin' I/O port allocation crap. */
#undef release_region
-#undef check_region
#undef request_region
#define release_region(X, Y) do { } while(0)
-#define check_region(X, Y) (0)
#define request_region(X, Y, Z) (1)
struct sun3xflop_private {
diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h
index cbabde4..c2554bc 100644
--- a/include/asm-m68k/unistd.h
+++ b/include/asm-m68k/unistd.h
@@ -444,7 +444,6 @@
unsigned long fd, unsigned long pgoff);
asmlinkage int sys_execve(char *name, char **argv, char **envp);
asmlinkage int sys_pipe(unsigned long *fildes);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
struct pt_regs;
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
diff --git a/include/asm-m68knommu/ide.h b/include/asm-m68knommu/ide.h
index b1cbf8b..836f072 100644
--- a/include/asm-m68knommu/ide.h
+++ b/include/asm-m68knommu/ide.h
@@ -163,13 +163,6 @@
}
-static IDE_INLINE int
-ide_check_region(ide_ioreg_t from, unsigned int extent)
-{
- return 0;
-}
-
-
static IDE_INLINE void
ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
{
diff --git a/include/asm-m68knommu/semaphore.h b/include/asm-m68knommu/semaphore.h
index febe85a..17aee15 100644
--- a/include/asm-m68knommu/semaphore.h
+++ b/include/asm-m68knommu/semaphore.h
@@ -35,9 +35,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-m68knommu/unistd.h b/include/asm-m68knommu/unistd.h
index 84b6fa1..5373988 100644
--- a/include/asm-m68knommu/unistd.h
+++ b/include/asm-m68knommu/unistd.h
@@ -504,7 +504,6 @@
unsigned long fd, unsigned long pgoff);
asmlinkage int sys_execve(char *name, char **argv, char **envp);
asmlinkage int sys_pipe(unsigned long *fildes);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
struct pt_regs;
int sys_request_irq(unsigned int,
irqreturn_t (*)(int, void *, struct pt_regs *),
diff --git a/include/asm-mips/abi.h b/include/asm-mips/abi.h
new file mode 100644
index 0000000..2e7e651
--- /dev/null
+++ b/include/asm-mips/abi.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 by Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_ABI_H
+#define _ASM_ABI_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+struct mips_abi {
+ int (* const do_signal)(sigset_t *oldset, struct pt_regs *regs);
+ int (* const setup_frame)(struct k_sigaction * ka,
+ struct pt_regs *regs, int signr,
+ sigset_t *set);
+ int (* const setup_rt_frame)(struct k_sigaction * ka,
+ struct pt_regs *regs, int signr,
+ sigset_t *set, siginfo_t *info);
+};
+
+#endif /* _ASM_ABI_H */
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
index 7dc2619..42520cc 100644
--- a/include/asm-mips/addrspace.h
+++ b/include/asm-mips/addrspace.h
@@ -20,10 +20,12 @@
#define _ATYPE_
#define _ATYPE32_
#define _ATYPE64_
+#define _LLCONST_(x) x
#else
#define _ATYPE_ __PTRDIFF_TYPE__
#define _ATYPE32_ int
#define _ATYPE64_ long long
+#define _LLCONST_(x) x ## LL
#endif
/*
@@ -45,8 +47,9 @@
/*
* Returns the physical address of a CKSEGx / XKPHYS address
*/
-#define CPHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
-#define XPHYSADDR(a) ((_ACAST64_ (a)) & 0x000000ffffffffff)
+#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff)
+#define XPHYSADDR(a) ((_ACAST64_(a)) & \
+ _LLCONST_(0x000000ffffffffff))
#ifdef CONFIG_64BIT
@@ -55,14 +58,14 @@
* The compatibility segments use the full 64-bit sign extended value. Note
* the R8000 doesn't have them so don't reference these in generic MIPS code.
*/
-#define XKUSEG 0x0000000000000000
-#define XKSSEG 0x4000000000000000
-#define XKPHYS 0x8000000000000000
-#define XKSEG 0xc000000000000000
-#define CKSEG0 0xffffffff80000000
-#define CKSEG1 0xffffffffa0000000
-#define CKSSEG 0xffffffffc0000000
-#define CKSEG3 0xffffffffe0000000
+#define XKUSEG _LLCONST_(0x0000000000000000)
+#define XKSSEG _LLCONST_(0x4000000000000000)
+#define XKPHYS _LLCONST_(0x8000000000000000)
+#define XKSEG _LLCONST_(0xc000000000000000)
+#define CKSEG0 _LLCONST_(0xffffffff80000000)
+#define CKSEG1 _LLCONST_(0xffffffffa0000000)
+#define CKSSEG _LLCONST_(0xffffffffc0000000)
+#define CKSEG3 _LLCONST_(0xffffffffe0000000)
#define CKSEG0ADDR(a) (CPHYSADDR(a) | CKSEG0)
#define CKSEG1ADDR(a) (CPHYSADDR(a) | CKSEG1)
@@ -120,7 +123,8 @@
#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED,(p))
#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE,(p))
#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
-#define PHYS_TO_XKPHYS(cm,a) (0x8000000000000000 | ((cm)<<59) | (a))
+#define PHYS_TO_XKPHYS(cm,a) (_LLCONST_(0x8000000000000000) | \
+ ((cm)<<59) | (a))
#if defined (CONFIG_CPU_R4300) \
|| defined (CONFIG_CPU_R4X00) \
@@ -128,46 +132,56 @@
|| defined (CONFIG_CPU_NEVADA) \
|| defined (CONFIG_CPU_TX49XX) \
|| defined (CONFIG_CPU_MIPS64)
-#define KUSIZE 0x0000010000000000 /* 2^^40 */
-#define KUSIZE_64 0x0000010000000000 /* 2^^40 */
-#define K0SIZE 0x0000001000000000 /* 2^^36 */
-#define K1SIZE 0x0000001000000000 /* 2^^36 */
-#define K2SIZE 0x000000ff80000000
-#define KSEGSIZE 0x000000ff80000000 /* max syssegsz */
-#define TO_PHYS_MASK 0x0000000fffffffff /* 2^^36 - 1 */
+#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K0SIZE _LLCONST_(0x0000001000000000) /* 2^^36 */
+#define K1SIZE _LLCONST_(0x0000001000000000) /* 2^^36 */
+#define K2SIZE _LLCONST_(0x000000ff80000000)
+#define KSEGSIZE _LLCONST_(0x000000ff80000000) /* max syssegsz */
+#define TO_PHYS_MASK _LLCONST_(0x0000000fffffffff) /* 2^^36 - 1 */
#endif
#if defined (CONFIG_CPU_R8000)
/* We keep KUSIZE consistent with R4000 for now (2^^40) instead of (2^^48) */
-#define KUSIZE 0x0000010000000000 /* 2^^40 */
-#define KUSIZE_64 0x0000010000000000 /* 2^^40 */
-#define K0SIZE 0x0000010000000000 /* 2^^40 */
-#define K1SIZE 0x0000010000000000 /* 2^^40 */
-#define K2SIZE 0x0001000000000000
-#define KSEGSIZE 0x0000010000000000 /* max syssegsz */
-#define TO_PHYS_MASK 0x000000ffffffffff /* 2^^40 - 1 */
+#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K0SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K1SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K2SIZE _LLCONST_(0x0001000000000000)
+#define KSEGSIZE _LLCONST_(0x0000010000000000) /* max syssegsz */
+#define TO_PHYS_MASK _LLCONST_(0x000000ffffffffff) /* 2^^40 - 1 */
#endif
#if defined (CONFIG_CPU_R10000)
-#define KUSIZE 0x0000010000000000 /* 2^^40 */
-#define KUSIZE_64 0x0000010000000000 /* 2^^40 */
-#define K0SIZE 0x0000010000000000 /* 2^^40 */
-#define K1SIZE 0x0000010000000000 /* 2^^40 */
-#define K2SIZE 0x00000fff80000000
-#define KSEGSIZE 0x00000fff80000000 /* max syssegsz */
-#define TO_PHYS_MASK 0x000000ffffffffff /* 2^^40 - 1 */
+#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K0SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K1SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */
+#define K2SIZE _LLCONST_(0x00000fff80000000)
+#define KSEGSIZE _LLCONST_(0x00000fff80000000) /* max syssegsz */
+#define TO_PHYS_MASK _LLCONST_(0x000000ffffffffff) /* 2^^40 - 1 */
+#endif
+
+#if defined(CONFIG_CPU_SB1) || defined(CONFIG_CPU_SB1A)
+#define KUSIZE _LLCONST_(0x0000100000000000) /* 2^^44 */
+#define KUSIZE_64 _LLCONST_(0x0000100000000000) /* 2^^44 */
+#define K0SIZE _LLCONST_(0x0000100000000000) /* 2^^44 */
+#define K1SIZE _LLCONST_(0x0000100000000000) /* 2^^44 */
+#define K2SIZE _LLCONST_(0x0000ffff80000000)
+#define KSEGSIZE _LLCONST_(0x0000ffff80000000) /* max syssegsz */
+#define TO_PHYS_MASK _LLCONST_(0x00000fffffffffff) /* 2^^44 - 1 */
#endif
/*
* Further names for SGI source compatibility. These are stolen from
* IRIX's <sys/mips_addrspace.h>.
*/
-#define KUBASE 0
-#define KUSIZE_32 0x0000000080000000 /* KUSIZE
+#define KUBASE _LLCONST_(0)
+#define KUSIZE_32 _LLCONST_(0x0000000080000000) /* KUSIZE
for a 32 bit proc */
-#define K0BASE_EXL_WR 0xa800000000000000 /* exclusive on write */
-#define K0BASE_NONCOH 0x9800000000000000 /* noncoherent */
-#define K0BASE_EXL 0xa000000000000000 /* exclusive */
+#define K0BASE_EXL_WR _LLCONST_(0xa800000000000000) /* exclusive on write */
+#define K0BASE_NONCOH _LLCONST_(0x9800000000000000) /* noncoherent */
+#define K0BASE_EXL _LLCONST_(0xa000000000000000) /* exclusive */
#ifndef CONFIG_CPU_R8000
@@ -176,7 +190,7 @@
* in order to catch bugs in the source code.
*/
-#define COMPAT_K1BASE32 0xffffffffa0000000
+#define COMPAT_K1BASE32 _LLCONST_(0xffffffffa0000000)
#define PHYS_TO_COMPATK1(x) ((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */
#endif
diff --git a/include/asm-mips/asm.h b/include/asm-mips/asm.h
index f532377..4b090f3 100644
--- a/include/asm-mips/asm.h
+++ b/include/asm-mips/asm.h
@@ -107,6 +107,7 @@
/*
* Print formatted string
*/
+#ifdef CONFIG_PRINTK
#define PRINT(string) \
.set push; \
.set reorder; \
@@ -114,6 +115,9 @@
jal printk; \
.set pop; \
TEXT(string)
+#else
+#define PRINT(string)
+#endif
#define TEXT(msg) \
.pushsection .data; \
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
index c0bd8d0..6202eb8 100644
--- a/include/asm-mips/atomic.h
+++ b/include/asm-mips/atomic.h
@@ -62,20 +62,24 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %1 # atomic_add \n"
" addu %0, %2 \n"
" sc %0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else if (cpu_has_llsc) {
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %1 # atomic_add \n"
" addu %0, %2 \n"
" sc %0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else {
@@ -100,20 +104,24 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %1 # atomic_sub \n"
" subu %0, %2 \n"
" sc %0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else if (cpu_has_llsc) {
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %1 # atomic_sub \n"
" subu %0, %2 \n"
" sc %0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else {
@@ -136,12 +144,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_add_return \n"
" addu %0, %1, %3 \n"
" sc %0, %2 \n"
" beqzl %0, 1b \n"
" addu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -149,12 +159,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_add_return \n"
" addu %0, %1, %3 \n"
" sc %0, %2 \n"
" beqz %0, 1b \n"
" addu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -179,12 +191,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_sub_return \n"
" subu %0, %1, %3 \n"
" sc %0, %2 \n"
" beqzl %0, 1b \n"
" subu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -192,12 +206,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_sub_return \n"
" subu %0, %1, %3 \n"
" sc %0, %2 \n"
" beqz %0, 1b \n"
" subu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -229,6 +245,7 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_sub_if_positive\n"
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
@@ -236,6 +253,7 @@
" beqzl %0, 1b \n"
" sync \n"
"1: \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -243,6 +261,7 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %1, %2 # atomic_sub_if_positive\n"
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
@@ -250,6 +269,7 @@
" beqz %0, 1b \n"
" sync \n"
"1: \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -367,20 +387,24 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %1 # atomic64_add \n"
" addu %0, %2 \n"
" scd %0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else if (cpu_has_llsc) {
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %1 # atomic64_add \n"
" addu %0, %2 \n"
" scd %0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else {
@@ -405,20 +429,24 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %1 # atomic64_sub \n"
" subu %0, %2 \n"
" scd %0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else if (cpu_has_llsc) {
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %1 # atomic64_sub \n"
" subu %0, %2 \n"
" scd %0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter));
} else {
@@ -441,12 +469,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_add_return \n"
" addu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqzl %0, 1b \n"
" addu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -454,12 +484,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_add_return \n"
" addu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqz %0, 1b \n"
" addu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -484,12 +516,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_return \n"
" subu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqzl %0, 1b \n"
" subu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -497,12 +531,14 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_return \n"
" subu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqz %0, 1b \n"
" subu %0, %1, %3 \n"
" sync \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -534,6 +570,7 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_if_positive\n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
@@ -541,6 +578,7 @@
" beqzl %0, 1b \n"
" sync \n"
"1: \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
@@ -548,6 +586,7 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_if_positive\n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
@@ -555,6 +594,7 @@
" beqz %0, 1b \n"
" sync \n"
"1: \n"
+ " .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
: "memory");
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index eb8d79d..5496f90 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -12,20 +12,21 @@
#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/types.h>
+#include <asm/bug.h>
#include <asm/byteorder.h> /* sigh ... */
#include <asm/cpu-features.h>
#if (_MIPS_SZLONG == 32)
#define SZLONG_LOG 5
#define SZLONG_MASK 31UL
-#define __LL "ll "
-#define __SC "sc "
+#define __LL "ll "
+#define __SC "sc "
#define cpu_to_lelongp(x) cpu_to_le32p((__u32 *) (x))
#elif (_MIPS_SZLONG == 64)
#define SZLONG_LOG 6
#define SZLONG_MASK 63UL
-#define __LL "lld "
-#define __SC "scd "
+#define __LL "lld "
+#define __SC "scd "
#define cpu_to_lelongp(x) cpu_to_le64p((__u64 *) (x))
#endif
@@ -72,18 +73,22 @@
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # set_bit \n"
" or %0, %2 \n"
- " "__SC "%0, %1 \n"
+ " " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
} else if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # set_bit \n"
" or %0, %2 \n"
- " "__SC "%0, %1 \n"
+ " " __SC "%0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
} else {
@@ -132,18 +137,22 @@
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # clear_bit \n"
" and %0, %2 \n"
" " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (~(1UL << (nr & SZLONG_MASK))), "m" (*m));
} else if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # clear_bit \n"
" and %0, %2 \n"
" " __SC "%0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (~(1UL << (nr & SZLONG_MASK))), "m" (*m));
} else {
@@ -191,10 +200,12 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # change_bit \n"
" xor %0, %2 \n"
- " "__SC "%0, %1 \n"
+ " " __SC "%0, %1 \n"
" beqzl %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
} else if (cpu_has_llsc) {
@@ -202,10 +213,12 @@
unsigned long temp;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # change_bit \n"
" xor %0, %2 \n"
- " "__SC "%0, %1 \n"
+ " " __SC "%0, %1 \n"
" beqz %0, 1b \n"
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m)
: "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m));
} else {
@@ -253,14 +266,16 @@
unsigned long temp, res;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # test_and_set_bit \n"
" or %2, %0, %3 \n"
" " __SC "%2, %1 \n"
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
- "sync \n"
+ " sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -271,16 +286,18 @@
unsigned long temp, res;
__asm__ __volatile__(
- " .set noreorder # test_and_set_bit \n"
- "1: " __LL "%0, %1 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_set_bit \n"
" or %2, %0, %3 \n"
" " __SC "%2, %1 \n"
" beqz %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
- "sync \n"
+ " sync \n"
#endif
- ".set\treorder"
+ " .set pop \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -343,15 +360,17 @@
unsigned long temp, res;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: " __LL "%0, %1 # test_and_clear_bit \n"
" or %2, %0, %3 \n"
" xor %2, %3 \n"
- __SC "%2, %1 \n"
+ " " __SC "%2, %1 \n"
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -362,17 +381,19 @@
unsigned long temp, res;
__asm__ __volatile__(
- " .set noreorder # test_and_clear_bit \n"
- "1: " __LL "%0, %1 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_clear_bit \n"
" or %2, %0, %3 \n"
" xor %2, %3 \n"
- __SC "%2, %1 \n"
+ " " __SC "%2, %1 \n"
" beqz %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
- " .set reorder \n"
+ " .set pop \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -435,14 +456,16 @@
unsigned long temp, res;
__asm__ __volatile__(
- "1: " __LL " %0, %1 # test_and_change_bit \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_change_bit \n"
" xor %2, %0, %3 \n"
- " "__SC "%2, %1 \n"
+ " " __SC "%2, %1 \n"
" beqzl %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -453,16 +476,18 @@
unsigned long temp, res;
__asm__ __volatile__(
- " .set noreorder # test_and_change_bit \n"
- "1: " __LL " %0, %1 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_change_bit \n"
" xor %2, %0, %3 \n"
- " "__SC "\t%2, %1 \n"
+ " " __SC "\t%2, %1 \n"
" beqz %2, 1b \n"
" and %2, %0, %3 \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
- " .set reorder \n"
+ " .set pop \n"
: "=&r" (temp), "=m" (*m), "=&r" (res)
: "r" (1UL << (nr & SZLONG_MASK)), "m" (*m)
: "memory");
@@ -523,22 +548,60 @@
}
/*
- * ffz - find first zero in word.
+ * Return the bit position (0..63) of the most significant 1 bit in a word
+ * Returns -1 if no 1 bit exists
+ */
+static inline int __ilog2(unsigned long x)
+{
+ int lz;
+
+ if (sizeof(x) == 4) {
+ __asm__ (
+ " .set push \n"
+ " .set mips32 \n"
+ " clz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (lz)
+ : "r" (x));
+
+ return 31 - lz;
+ }
+
+ BUG_ON(sizeof(x) != 8);
+
+ __asm__ (
+ " .set push \n"
+ " .set mips64 \n"
+ " dclz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (lz)
+ : "r" (x));
+
+ return 63 - lz;
+}
+
+/*
+ * __ffs - find first bit in word.
* @word: The word to search
*
- * Undefined if no zero exists, so code should check against ~0UL first.
+ * Returns 0..SZLONG-1
+ * Undefined if no bit exists, so code should check against 0 first.
*/
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __ffs(unsigned long word)
{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ return __ilog2(word & -word);
+#else
int b = 0, s;
- word = ~word;
#ifdef CONFIG_32BIT
s = 16; if (word << 16 != 0) s = 0; b += s; word >>= s;
s = 8; if (word << 24 != 0) s = 0; b += s; word >>= s;
s = 4; if (word << 28 != 0) s = 0; b += s; word >>= s;
s = 2; if (word << 30 != 0) s = 0; b += s; word >>= s;
s = 1; if (word << 31 != 0) s = 0; b += s;
+
+ return b;
#endif
#ifdef CONFIG_64BIT
s = 32; if (word << 32 != 0) s = 0; b += s; word >>= s;
@@ -547,27 +610,92 @@
s = 4; if (word << 60 != 0) s = 0; b += s; word >>= s;
s = 2; if (word << 62 != 0) s = 0; b += s; word >>= s;
s = 1; if (word << 63 != 0) s = 0; b += s;
-#endif
return b;
+#endif
+#endif
}
/*
- * __ffs - find first bit in word.
+ * ffs - find first bit set.
* @word: The word to search
*
- * Undefined if no bit exists, so code should check against 0 first.
+ * Returns 1..SZLONG
+ * Returns 0 if no bit exists
*/
-static inline unsigned long __ffs(unsigned long word)
+
+static inline unsigned long ffs(unsigned long word)
{
- return ffz(~word);
+ if (!word)
+ return 0;
+
+ return __ffs(word) + 1;
}
/*
- * fls: find last bit set.
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
*/
+static inline unsigned long ffz(unsigned long word)
+{
+ return __ffs (~word);
+}
-#define fls(x) generic_fls(x)
+/*
+ * flz - find last zero in word.
+ * @word: The word to search
+ *
+ * Returns 0..SZLONG-1
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long flz(unsigned long word)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ return __ilog2(~word);
+#else
+#ifdef CONFIG_32BIT
+ int r = 31, s;
+ word = ~word;
+ s = 16; if ((word & 0xffff0000)) s = 0; r -= s; word <<= s;
+ s = 8; if ((word & 0xff000000)) s = 0; r -= s; word <<= s;
+ s = 4; if ((word & 0xf0000000)) s = 0; r -= s; word <<= s;
+ s = 2; if ((word & 0xc0000000)) s = 0; r -= s; word <<= s;
+ s = 1; if ((word & 0x80000000)) s = 0; r -= s;
+
+ return r;
+#endif
+#ifdef CONFIG_64BIT
+ int r = 63, s;
+ word = ~word;
+ s = 32; if ((word & 0xffffffff00000000UL)) s = 0; r -= s; word <<= s;
+ s = 16; if ((word & 0xffff000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 8; if ((word & 0xff00000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 4; if ((word & 0xf000000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 2; if ((word & 0xc000000000000000UL)) s = 0; r -= s; word <<= s;
+ s = 1; if ((word & 0x8000000000000000UL)) s = 0; r -= s;
+
+ return r;
+#endif
+#endif
+}
+
+/*
+ * fls - find last bit set.
+ * @word: The word to search
+ *
+ * Returns 1..SZLONG
+ * Returns 0 if no bit exists
+ */
+static inline unsigned long fls(unsigned long word)
+{
+ if (word == 0)
+ return 0;
+
+ return flz(~word) + 1;
+}
+
/*
* find_next_zero_bit - find the first zero bit in a memory region
@@ -704,17 +832,6 @@
}
/*
- * ffs - find first bit set
- * @x: the word to search
- *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-
-#define ffs(x) generic_ffs(x)
-
-/*
* hweightN - returns the hamming weight of a N-bit word
* @x: the word to weigh
*
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index b1e57d7..14fc88f 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -77,6 +77,7 @@
#define MACH_SGI_IP27 1 /* Origin 200, Origin 2000, Onyx 2 */
#define MACH_SGI_IP28 2 /* Indigo2 Impact */
#define MACH_SGI_IP32 3 /* O2 */
+#define MACH_SGI_IP30 4 /* Octane, Octane2 */
/*
* Valid machtype for group COBALT
@@ -136,6 +137,7 @@
#define MACH_GROUP_PHILIPS 14
#define MACH_PHILIPS_NINO 0 /* Nino */
#define MACH_PHILIPS_VELO 1 /* Velo */
+#define MACH_PHILIPS_JBS 2 /* JBS */
/*
* Valid machtype for group Globespan
@@ -159,6 +161,7 @@
#define MACH_TOSHIBA_JMR3927 3 /* JMR-TX3927 CPU/IO board */
#define MACH_TOSHIBA_RBTX4927 4
#define MACH_TOSHIBA_RBTX4937 5
+#define MACH_TOSHIBA_RBTX4938 6
#define GROUP_TOSHIBA_NAMES { "Pallas", "TopasCE", "JMR", "JMR TX3927", \
"RBTX4927", "RBTX4937" }
@@ -177,6 +180,8 @@
#define MACH_MTX1 7 /* 4G MTX-1 Au1500-based board */
#define MACH_PB1550 8 /* Au1550-based eval board */
#define MACH_DB1550 9 /* Au1550-based eval board */
+#define MACH_PB1200 10 /* Au1200-based eval board */
+#define MACH_DB1200 11 /* Au1200-based eval board */
/*
* Valid machtype for group NEC_VR41XX
diff --git a/include/asm-mips/break.h b/include/asm-mips/break.h
index 2e6de78..25b980c 100644
--- a/include/asm-mips/break.h
+++ b/include/asm-mips/break.h
@@ -28,6 +28,7 @@
#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */
#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
#define BRK_BUG 512 /* Used by BUG() */
+#define BRK_KDB 513 /* Used in KDB_ENTER() */
#define BRK_MULOVF 1023 /* Multiply overflow */
#endif /* __ASM_BREAK_H */
diff --git a/include/asm-mips/bug.h b/include/asm-mips/bug.h
index 3f594b4..87d49a5 100644
--- a/include/asm-mips/bug.h
+++ b/include/asm-mips/bug.h
@@ -1,16 +1,21 @@
#ifndef __ASM_BUG_H
#define __ASM_BUG_H
-#include <asm/break.h>
+#include <linux/config.h>
#ifdef CONFIG_BUG
-#define HAVE_ARCH_BUG
+
+#include <asm/break.h>
+
#define BUG() \
do { \
__asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
} while (0)
+
+#define HAVE_ARCH_BUG
+
#endif
#include <asm-generic/bug.h>
-#endif
+#endif /* __ASM_BUG_H */
diff --git a/include/asm-mips/bugs.h b/include/asm-mips/bugs.h
index b14b961..cb2ea7c 100644
--- a/include/asm-mips/bugs.h
+++ b/include/asm-mips/bugs.h
@@ -8,12 +8,18 @@
#define _ASM_BUGS_H
#include <linux/config.h>
+#include <linux/delay.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
extern void check_bugs32(void);
extern void check_bugs64(void);
static inline void check_bugs(void)
{
+ unsigned int cpu = smp_processor_id();
+
+ cpu_data[cpu].udelay_val = loops_per_jiffy;
check_bugs32();
#ifdef CONFIG_64BIT
check_bugs64();
diff --git a/include/asm-mips/cache.h b/include/asm-mips/cache.h
index 4517bdf..1a5d1a6 100644
--- a/include/asm-mips/cache.h
+++ b/include/asm-mips/cache.h
@@ -10,6 +10,7 @@
#define _ASM_CACHE_H
#include <linux/config.h>
+#include <kmalloc.h>
#define L1_CACHE_SHIFT CONFIG_MIPS_L1_CACHE_SHIFT
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
@@ -18,6 +19,4 @@
#define SMP_CACHE_SHIFT L1_CACHE_SHIFT
#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define ARCH_KMALLOC_MINALIGN 8
-
#endif /* _ASM_CACHE_H */
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index 635f1bf..a18ba2e 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -49,17 +49,29 @@
extern void (*flush_icache_page)(struct vm_area_struct *vma,
struct page *page);
-extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*flush_icache_range)(unsigned long __user start,
+ unsigned long __user end);
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { \
- memcpy(dst, (void *) src, len); \
- flush_icache_page(vma, page); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+{
+ if (cpu_has_dc_aliases)
+ flush_cache_page(vma, vaddr, page_to_pfn(page));
+ memcpy(dst, src, len);
+ flush_icache_page(vma, page);
+}
+
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len)
+{
+ if (cpu_has_dc_aliases)
+ flush_cache_page(vma, vaddr, page_to_pfn(page));
+ memcpy(dst, src, len);
+}
extern void (*flush_cache_sigtramp)(unsigned long addr);
extern void (*flush_icache_all)(void);
@@ -78,4 +90,7 @@
#define ClearPageDcacheDirty(page) \
clear_bit(PG_dcache_dirty, &(page)->flags)
+/* Run kernel code uncached, useful for cache probing functions. */
+unsigned long __init run_uncached(void *func);
+
#endif /* _ASM_CACHEFLUSH_H */
diff --git a/include/asm-mips/checksum.h b/include/asm-mips/checksum.h
index c1ea5a8..b09f897 100644
--- a/include/asm-mips/checksum.h
+++ b/include/asm-mips/checksum.h
@@ -34,8 +34,9 @@
* this is a new version of the above that records errors it finds in *errp,
* but continues and zeros the rest of the buffer.
*/
-unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, int len,
- unsigned int sum, int *errp);
+unsigned int csum_partial_copy_from_user(const unsigned char __user *src,
+ unsigned char *dst, int len,
+ unsigned int sum, int *errp);
/*
* Copy and checksum to user
@@ -70,14 +71,15 @@
static inline unsigned short int csum_fold(unsigned int sum)
{
__asm__(
- ".set\tnoat\t\t\t# csum_fold\n\t"
- "sll\t$1,%0,16\n\t"
- "addu\t%0,$1\n\t"
- "sltu\t$1,%0,$1\n\t"
- "srl\t%0,%0,16\n\t"
- "addu\t%0,$1\n\t"
- "xori\t%0,0xffff\n\t"
- ".set\tat"
+ " .set push # csum_fold\n"
+ " .set noat \n"
+ " sll $1, %0, 16 \n"
+ " addu %0, $1 \n"
+ " sltu $1, %0, $1 \n"
+ " srl %0, %0, 16 \n"
+ " addu %0, $1 \n"
+ " xori %0, 0xffff \n"
+ " .set pop"
: "=r" (sum)
: "0" (sum));
@@ -127,29 +129,30 @@
unsigned int sum)
{
__asm__(
- ".set\tnoat\t\t\t# csum_tcpudp_nofold\n\t"
+ " .set push # csum_tcpudp_nofold\n"
+ " .set noat \n"
#ifdef CONFIG_32BIT
- "addu\t%0, %2\n\t"
- "sltu\t$1, %0, %2\n\t"
- "addu\t%0, $1\n\t"
+ " addu %0, %2 \n"
+ " sltu $1, %0, %2 \n"
+ " addu %0, $1 \n"
- "addu\t%0, %3\n\t"
- "sltu\t$1, %0, %3\n\t"
- "addu\t%0, $1\n\t"
+ " addu %0, %3 \n"
+ " sltu $1, %0, %3 \n"
+ " addu %0, $1 \n"
- "addu\t%0, %4\n\t"
- "sltu\t$1, %0, %4\n\t"
- "addu\t%0, $1\n\t"
+ " addu %0, %4 \n"
+ " sltu $1, %0, %4 \n"
+ " addu %0, $1 \n"
#endif
#ifdef CONFIG_64BIT
- "daddu\t%0, %2\n\t"
- "daddu\t%0, %3\n\t"
- "daddu\t%0, %4\n\t"
- "dsll32\t$1, %0, 0\n\t"
- "daddu\t%0, $1\n\t"
- "dsrl32\t%0, %0, 0\n\t"
+ " daddu %0, %2 \n"
+ " daddu %0, %3 \n"
+ " daddu %0, %4 \n"
+ " dsll32 $1, %0, 0 \n"
+ " daddu %0, $1 \n"
+ " dsra32 %0, %0, 0 \n"
#endif
- ".set\tat"
+ " .set pop"
: "=r" (sum)
: "0" (daddr), "r"(saddr),
#ifdef __MIPSEL__
@@ -192,57 +195,57 @@
unsigned int sum)
{
__asm__(
- ".set\tpush\t\t\t# csum_ipv6_magic\n\t"
- ".set\tnoreorder\n\t"
- ".set\tnoat\n\t"
- "addu\t%0, %5\t\t\t# proto (long in network byte order)\n\t"
- "sltu\t$1, %0, %5\n\t"
- "addu\t%0, $1\n\t"
+ " .set push # csum_ipv6_magic\n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " addu %0, %5 # proto (long in network byte order)\n"
+ " sltu $1, %0, %5 \n"
+ " addu %0, $1 \n"
- "addu\t%0, %6\t\t\t# csum\n\t"
- "sltu\t$1, %0, %6\n\t"
- "lw\t%1, 0(%2)\t\t\t# four words source address\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " addu %0, %6 # csum\n"
+ " sltu $1, %0, %6 \n"
+ " lw %1, 0(%2) # four words source address\n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 4(%2)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 4(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 8(%2)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 8(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 12(%2)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 12(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 0(%3)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 0(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 4(%3)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 4(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 8(%3)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 8(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "lw\t%1, 12(%3)\n\t"
- "addu\t%0, $1\n\t"
- "addu\t%0, %1\n\t"
- "sltu\t$1, %0, %1\n\t"
+ " lw %1, 12(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
- "addu\t%0, $1\t\t\t# Add final carry\n\t"
- ".set\tpop"
+ " addu %0, $1 # Add final carry\n"
+ " .set pop"
: "=r" (sum), "=r" (proto)
: "r" (saddr), "r" (daddr),
"0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
diff --git a/include/asm-mips/cobalt/cobalt.h b/include/asm-mips/cobalt/cobalt.h
index ca1fbc0..78e1df2 100644
--- a/include/asm-mips/cobalt/cobalt.h
+++ b/include/asm-mips/cobalt/cobalt.h
@@ -19,18 +19,23 @@
* 9 - PCI
* 14 - IDE0
* 15 - IDE1
- *
+ */
+#define COBALT_QUBE_SLOT_IRQ 9
+
+/*
* CPU IRQs are 16 ... 23
*/
-#define COBALT_TIMER_IRQ 18
-#define COBALT_SCC_IRQ 19 /* pre-production has 85C30 */
-#define COBALT_RAQ_SCSI_IRQ 19
-#define COBALT_ETH0_IRQ 19
-#define COBALT_ETH1_IRQ 20
-#define COBALT_SERIAL_IRQ 21
-#define COBALT_SCSI_IRQ 21
-#define COBALT_VIA_IRQ 22 /* Chained to VIA ISA bridge */
-#define COBALT_QUBE_SLOT_IRQ 23
+#define COBALT_CPU_IRQ 16
+
+#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2)
+#define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */
+#define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3)
+#define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3)
+#define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4)
+#define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4)
+#define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5)
+#define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5)
+#define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */
/*
* PCI configuration space manifest constants. These are wired into
@@ -69,16 +74,21 @@
* Most of this really should go into a separate GT64111 header file.
*/
#define GT64111_IO_BASE 0x10000000UL
+#define GT64111_IO_END 0x11ffffffUL
+#define GT64111_MEM_BASE 0x12000000UL
+#define GT64111_MEM_END 0x13ffffffUL
#define GT64111_BASE 0x14000000UL
-#define GALILEO_REG(ofs) (KSEG0 + GT64111_BASE + (unsigned long)(ofs))
+#define GALILEO_REG(ofs) CKSEG1ADDR(GT64111_BASE + (unsigned long)(ofs))
#define GALILEO_INL(port) (*(volatile unsigned int *) GALILEO_REG(port))
#define GALILEO_OUTL(val, port) \
do { \
- *(volatile unsigned int *) GALILEO_REG(port) = (port); \
+ *(volatile unsigned int *) GALILEO_REG(port) = (val); \
} while (0)
-#define GALILEO_T0EXP 0x0100
+#define GALILEO_INTR_T0EXP (1 << 8)
+#define GALILEO_INTR_RETRY_CTR (1 << 20)
+
#define GALILEO_ENTC0 0x01
#define GALILEO_SELTC0 0x02
@@ -86,5 +96,21 @@
GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) | \
(PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS)
+#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
+# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */
+# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */
+# define COBALT_LED_WEB (1 << 2) /* RaQ */
+# define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */
+# define COBALT_LED_RESET 0x0f
+
+#define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK)
+# define COBALT_KEY_CLEAR (1 << 1)
+# define COBALT_KEY_LEFT (1 << 2)
+# define COBALT_KEY_UP (1 << 3)
+# define COBALT_KEY_DOWN (1 << 4)
+# define COBALT_KEY_RIGHT (1 << 5)
+# define COBALT_KEY_ENTER (1 << 6)
+# define COBALT_KEY_SELECT (1 << 7)
+# define COBALT_KEY_MASK 0xfe
#endif /* __ASM_COBALT_H */
diff --git a/include/asm-mips/cobalt/mach-gt64120.h b/include/asm-mips/cobalt/mach-gt64120.h
new file mode 100644
index 0000000..587fc43
--- /dev/null
+++ b/include/asm-mips/cobalt/mach-gt64120.h
@@ -0,0 +1 @@
+/* there's something here ... in the dark */
diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h
index 2c084cd..35d2604 100644
--- a/include/asm-mips/compat.h
+++ b/include/asm-mips/compat.h
@@ -15,10 +15,10 @@
typedef s32 compat_suseconds_t;
typedef s32 compat_pid_t;
-typedef u32 __compat_uid_t;
-typedef u32 __compat_gid_t;
-typedef u32 __compat_uid32_t;
-typedef u32 __compat_gid32_t;
+typedef s32 __compat_uid_t;
+typedef s32 __compat_gid_t;
+typedef __compat_uid_t __compat_uid32_t;
+typedef __compat_gid_t __compat_gid32_t;
typedef u32 compat_mode_t;
typedef u32 compat_ino_t;
typedef u32 compat_dev_t;
@@ -54,8 +54,8 @@
compat_ino_t st_ino;
compat_mode_t st_mode;
compat_nlink_t st_nlink;
- __compat_uid32_t st_uid;
- __compat_gid32_t st_gid;
+ __compat_uid_t st_uid;
+ __compat_gid_t st_gid;
compat_dev_t st_rdev;
s32 st_pad2[2];
compat_off_t st_size;
diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
index 9a2de642..03627cfb 100644
--- a/include/asm-mips/cpu-features.h
+++ b/include/asm-mips/cpu-features.h
@@ -4,6 +4,7 @@
* for more details.
*
* Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#ifndef __ASM_CPU_FEATURES_H
#define __ASM_CPU_FEATURES_H
@@ -24,8 +25,19 @@
#ifndef cpu_has_4kex
#define cpu_has_4kex (cpu_data[0].options & MIPS_CPU_4KEX)
#endif
-#ifndef cpu_has_4ktlb
-#define cpu_has_4ktlb (cpu_data[0].options & MIPS_CPU_4KTLB)
+#ifndef cpu_has_3k_cache
+#define cpu_has_3k_cache (cpu_data[0].options & MIPS_CPU_3K_CACHE)
+#endif
+#define cpu_has_6k_cache 0
+#define cpu_has_8k_cache 0
+#ifndef cpu_has_4k_cache
+#define cpu_has_4k_cache (cpu_data[0].options & MIPS_CPU_4K_CACHE)
+#endif
+#ifndef cpu_has_tx39_cache
+#define cpu_has_tx39_cache (cpu_data[0].options & MIPS_CPU_TX39_CACHE)
+#endif
+#ifndef cpu_has_sb1_cache
+#define cpu_has_sb1_cache (cpu_data[0].options & MIPS_CPU_SB1_CACHE)
#endif
#ifndef cpu_has_fpu
#define cpu_has_fpu (cpu_data[0].options & MIPS_CPU_FPU)
@@ -39,9 +51,6 @@
#ifndef cpu_has_watch
#define cpu_has_watch (cpu_data[0].options & MIPS_CPU_WATCH)
#endif
-#ifndef cpu_has_mips16
-#define cpu_has_mips16 (cpu_data[0].options & MIPS_CPU_MIPS16)
-#endif
#ifndef cpu_has_divec
#define cpu_has_divec (cpu_data[0].options & MIPS_CPU_DIVEC)
#endif
@@ -66,6 +75,18 @@
#ifndef cpu_has_llsc
#define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC)
#endif
+#ifndef cpu_has_mips16
+#define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16)
+#endif
+#ifndef cpu_has_mdmx
+#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX)
+#endif
+#ifndef cpu_has_mips3d
+#define cpu_has_mips3d (cpu_data[0].ases & MIPS_ASE_MIPS3D)
+#endif
+#ifndef cpu_has_smartmips
+#define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
+#endif
#ifndef cpu_has_vtag_icache
#define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
#endif
@@ -95,15 +116,16 @@
#endif
#endif
-/*
- * Certain CPUs may throw bizarre exceptions if not the whole cacheline
- * contains valid instructions. For these we ensure proper alignment of
- * signal trampolines and pad them to the size of a full cache lines with
- * nops. This is also used in structure definitions so can't be a test macro
- * like the others.
- */
-#ifndef PLAT_TRAMPOLINE_STUFF_LINE
-#define PLAT_TRAMPOLINE_STUFF_LINE 0UL
+#ifndef cpu_has_dsp
+#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
+#endif
+
+#ifdef CONFIG_MIPS_MT
+#ifndef cpu_has_mipsmt
+# define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT)
+#endif
+#else
+# define cpu_has_mipsmt 0
#endif
#ifdef CONFIG_32BIT
@@ -142,6 +164,22 @@
# endif
#endif
+#ifdef CONFIG_CPU_MIPSR2
+# if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT)
+# else
+# define cpu_has_vint 0
+# endif
+# if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC)
+# else
+# define cpu_has_veic 0
+# endif
+#else
+# define cpu_has_vint 0
+# define cpu_has_veic 0
+#endif
+
#ifndef cpu_has_subset_pcaches
#define cpu_has_subset_pcaches (cpu_data[0].options & MIPS_CPU_SUBSET_CACHES)
#endif
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
index 20a35b1..d5cf519 100644
--- a/include/asm-mips/cpu-info.h
+++ b/include/asm-mips/cpu-info.h
@@ -7,6 +7,7 @@
* Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
* Copyright (C) 1996 Paul M. Antoine
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#ifndef __ASM_CPU_INFO_H
#define __ASM_CPU_INFO_H
@@ -61,6 +62,7 @@
* Capability and feature descriptor structure for MIPS CPU
*/
unsigned long options;
+ unsigned long ases;
unsigned int processor_id;
unsigned int fpu_id;
unsigned int cputype;
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index dec060b..48eac296 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -3,6 +3,7 @@
* various MIPS cpu types.
*
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#ifndef _ASM_CPU_H
#define _ASM_CPU_H
@@ -22,12 +23,17 @@
spec.
*/
-#define PRID_COMP_LEGACY 0x000000
-#define PRID_COMP_MIPS 0x010000
-#define PRID_COMP_BROADCOM 0x020000
-#define PRID_COMP_ALCHEMY 0x030000
-#define PRID_COMP_SIBYTE 0x040000
-#define PRID_COMP_SANDCRAFT 0x050000
+#define PRID_COMP_LEGACY 0x000000
+#define PRID_COMP_MIPS 0x010000
+#define PRID_COMP_BROADCOM 0x020000
+#define PRID_COMP_ALCHEMY 0x030000
+#define PRID_COMP_SIBYTE 0x040000
+#define PRID_COMP_SANDCRAFT 0x050000
+#define PRID_COMP_PHILIPS 0x060000
+#define PRID_COMP_TOSHIBA 0x070000
+#define PRID_COMP_LSI 0x080000
+#define PRID_COMP_LEXRA 0x0b0000
+
/*
* Assigned values for the product ID register. In order to detect a
@@ -46,6 +52,7 @@
#define PRID_IMP_VR41XX 0x0c00
#define PRID_IMP_R12000 0x0e00
#define PRID_IMP_R8000 0x1000
+#define PRID_IMP_PR4450 0x1200
#define PRID_IMP_R4600 0x2000
#define PRID_IMP_R4700 0x2100
#define PRID_IMP_TX39 0x2200
@@ -60,6 +67,13 @@
#define PRID_IMP_RM9000 0x3400
#define PRID_IMP_R5432 0x5400
#define PRID_IMP_R5500 0x5500
+
+#define PRID_IMP_UNKNOWN 0xff00
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_MIPS
+ */
+
#define PRID_IMP_4KC 0x8000
#define PRID_IMP_5KC 0x8100
#define PRID_IMP_20KC 0x8200
@@ -71,14 +85,15 @@
#define PRID_IMP_4KEMPR2 0x9100
#define PRID_IMP_4KSD 0x9200
#define PRID_IMP_24K 0x9300
-
-#define PRID_IMP_UNKNOWN 0xff00
+#define PRID_IMP_34K 0x9500
+#define PRID_IMP_24KE 0x9600
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
*/
#define PRID_IMP_SB1 0x0100
+#define PRID_IMP_SB1A 0x1100
/*
* These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
@@ -177,7 +192,11 @@
#define CPU_VR4133 56
#define CPU_AU1550 57
#define CPU_24K 58
-#define CPU_LAST 58
+#define CPU_AU1200 59
+#define CPU_34K 60
+#define CPU_PR4450 61
+#define CPU_SB1A 62
+#define CPU_LAST 62
/*
* ISA Level encodings
@@ -200,23 +219,37 @@
* CPU Option encodings
*/
#define MIPS_CPU_TLB 0x00000001 /* CPU has TLB */
-/* Leave a spare bit for variant MMU types... */
-#define MIPS_CPU_4KEX 0x00000004 /* "R4K" exception model */
-#define MIPS_CPU_4KTLB 0x00000008 /* "R4K" TLB handler */
-#define MIPS_CPU_FPU 0x00000010 /* CPU has FPU */
-#define MIPS_CPU_32FPR 0x00000020 /* 32 dbl. prec. FP registers */
-#define MIPS_CPU_COUNTER 0x00000040 /* Cycle count/compare */
-#define MIPS_CPU_WATCH 0x00000080 /* watchpoint registers */
-#define MIPS_CPU_MIPS16 0x00000100 /* code compression */
-#define MIPS_CPU_DIVEC 0x00000200 /* dedicated interrupt vector */
-#define MIPS_CPU_VCE 0x00000400 /* virt. coherence conflict possible */
-#define MIPS_CPU_CACHE_CDEX_P 0x00000800 /* Create_Dirty_Exclusive CACHE op */
-#define MIPS_CPU_CACHE_CDEX_S 0x00001000 /* ... same for seconary cache ... */
-#define MIPS_CPU_MCHECK 0x00002000 /* Machine check exception */
-#define MIPS_CPU_EJTAG 0x00004000 /* EJTAG exception */
-#define MIPS_CPU_NOFPUEX 0x00008000 /* no FPU exception */
-#define MIPS_CPU_LLSC 0x00010000 /* CPU has ll/sc instructions */
-#define MIPS_CPU_SUBSET_CACHES 0x00020000 /* P-cache subset enforced */
-#define MIPS_CPU_PREFETCH 0x00040000 /* CPU has usable prefetch */
+#define MIPS_CPU_4KEX 0x00000002 /* "R4K" exception model */
+#define MIPS_CPU_3K_CACHE 0x00000004 /* R3000-style caches */
+#define MIPS_CPU_4K_CACHE 0x00000008 /* R4000-style caches */
+#define MIPS_CPU_TX39_CACHE 0x00000010 /* TX3900-style caches */
+#define MIPS_CPU_SB1_CACHE 0x00000020 /* SB1-style caches */
+#define MIPS_CPU_FPU 0x00000040 /* CPU has FPU */
+#define MIPS_CPU_32FPR 0x00000080 /* 32 dbl. prec. FP registers */
+#define MIPS_CPU_COUNTER 0x00000100 /* Cycle count/compare */
+#define MIPS_CPU_WATCH 0x00000200 /* watchpoint registers */
+#define MIPS_CPU_DIVEC 0x00000400 /* dedicated interrupt vector */
+#define MIPS_CPU_VCE 0x00000800 /* virt. coherence conflict possible */
+#define MIPS_CPU_CACHE_CDEX_P 0x00001000 /* Create_Dirty_Exclusive CACHE op */
+#define MIPS_CPU_CACHE_CDEX_S 0x00002000 /* ... same for seconary cache ... */
+#define MIPS_CPU_MCHECK 0x00004000 /* Machine check exception */
+#define MIPS_CPU_EJTAG 0x00008000 /* EJTAG exception */
+#define MIPS_CPU_NOFPUEX 0x00010000 /* no FPU exception */
+#define MIPS_CPU_LLSC 0x00020000 /* CPU has ll/sc instructions */
+#define MIPS_CPU_SUBSET_CACHES 0x00040000 /* P-cache subset enforced */
+#define MIPS_CPU_PREFETCH 0x00080000 /* CPU has usable prefetch */
+#define MIPS_CPU_VINT 0x00100000 /* CPU supports MIPSR2 vectored interrupts */
+#define MIPS_CPU_VEIC 0x00200000 /* CPU supports MIPSR2 external interrupt controller mode */
+
+/*
+ * CPU ASE encodings
+ */
+#define MIPS_ASE_MIPS16 0x00000001 /* code compression */
+#define MIPS_ASE_MDMX 0x00000002 /* MIPS digital media extension */
+#define MIPS_ASE_MIPS3D 0x00000004 /* MIPS-3D */
+#define MIPS_ASE_SMARTMIPS 0x00000008 /* SmartMIPS */
+#define MIPS_ASE_DSP 0x00000010 /* Signal Processing ASE */
+#define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */
+
#endif /* _ASM_CPU_H */
diff --git a/include/asm-mips/dec/ecc.h b/include/asm-mips/dec/ecc.h
index 724908b..19495a4 100644
--- a/include/asm-mips/dec/ecc.h
+++ b/include/asm-mips/dec/ecc.h
@@ -49,7 +49,8 @@
extern void dec_ecc_be_init(void);
extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup);
-extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
#endif
#endif /* __ASM_MIPS_DEC_ECC_H */
diff --git a/include/asm-mips/dec/ioasic_addrs.h b/include/asm-mips/dec/ioasic_addrs.h
index 5e18a75..4cbc1f8 100644
--- a/include/asm-mips/dec/ioasic_addrs.h
+++ b/include/asm-mips/dec/ioasic_addrs.h
@@ -45,7 +45,8 @@
/*
- * Offsets for I/O ASIC registers (relative to (system_base + IOASIC_IOCTL)).
+ * Offsets for I/O ASIC registers
+ * (relative to (dec_kn_slot_base + IOASIC_IOCTL)).
*/
/* all systems */
#define IO_REG_SCSI_DMA_P 0x00 /* SCSI DMA Pointer */
diff --git a/include/asm-mips/dec/kn01.h b/include/asm-mips/dec/kn01.h
index 9469435..eb522aa 100644
--- a/include/asm-mips/dec/kn01.h
+++ b/include/asm-mips/dec/kn01.h
@@ -8,14 +8,12 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN01_H
#define __ASM_MIPS_DEC_KN01_H
-#include <asm/addrspace.h>
-
-#define KN01_SLOT_BASE KSEG1ADDR(0x10000000)
+#define KN01_SLOT_BASE 0x10000000
#define KN01_SLOT_SIZE 0x01000000
/*
@@ -41,17 +39,9 @@
/*
- * Some port addresses...
- */
-#define KN01_LANCE_BASE (KN01_SLOT_BASE + KN01_LANCE) /* 0xB8000000 */
-#define KN01_DZ11_BASE (KN01_SLOT_BASE + KN01_DZ11) /* 0xBC000000 */
-#define KN01_RTC_BASE (KN01_SLOT_BASE + KN01_RTC) /* 0xBD000000 */
-
-
-/*
* Frame buffer memory address.
*/
-#define KN01_VFB_MEM KSEG1ADDR(0x0fc00000)
+#define KN01_VFB_MEM 0x0fc00000
/*
* CPU interrupt bits.
@@ -80,4 +70,22 @@
#define KN01_CSR_VRGTRB (1<<0) /* red DAC voltage over blue (r/o) */
#define KN01_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+extern u16 cached_kn01_csr;
+extern spinlock_t kn01_lock;
+
+extern void dec_kn01_be_init(void);
+extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+#endif
+
#endif /* __ASM_MIPS_DEC_KN01_H */
diff --git a/include/asm-mips/dec/kn02.h b/include/asm-mips/dec/kn02.h
index f797f70..8319ad7 100644
--- a/include/asm-mips/dec/kn02.h
+++ b/include/asm-mips/dec/kn02.h
@@ -8,21 +8,12 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN02_H
#define __ASM_MIPS_DEC_KN02_H
-#ifndef __ASSEMBLY__
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#endif
-
-#include <asm/addrspace.h>
-#include <asm/dec/ecc.h>
-
-
-#define KN02_SLOT_BASE KSEG1ADDR(0x1fc00000)
+#define KN02_SLOT_BASE 0x1fc00000
#define KN02_SLOT_SIZE 0x00080000
/*
@@ -39,22 +30,14 @@
/*
- * Some port addresses...
- */
-#define KN02_DZ11_BASE (KN02_SLOT_BASE + KN02_DZ11) /* DZ11 */
-#define KN02_RTC_BASE (KN02_SLOT_BASE + KN02_RTC) /* RTC */
-#define KN02_CSR_BASE (KN02_SLOT_BASE + KN02_CSR) /* CSR */
-
-
-/*
* System Control & Status Register bits.
*/
#define KN02_CSR_RES_28 (0xf<<28) /* unused */
#define KN02_CSR_PSU (1<<27) /* power supply unit warning */
#define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */
#define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */
-#define KN03_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */
-#define KN03_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */
+#define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */
+#define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */
#define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */
#define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */
#define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */
@@ -63,8 +46,8 @@
#define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */
#define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */
#define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */
-#define KN03_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */
-#define KN03_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
+#define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */
+#define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
/*
@@ -98,6 +81,10 @@
#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
extern u32 cached_kn02_csr;
extern spinlock_t kn02_lock;
extern void init_kn02_irqs(int base);
diff --git a/include/asm-mips/dec/kn02xa.h b/include/asm-mips/dec/kn02xa.h
index 648c4dc..a25f3d7 100644
--- a/include/asm-mips/dec/kn02xa.h
+++ b/include/asm-mips/dec/kn02xa.h
@@ -9,7 +9,7 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki
*
* These are addresses which have to be known early in the boot process.
* For other addresses refer to tc.h, ioasic_addrs.h and friends.
@@ -17,31 +17,23 @@
#ifndef __ASM_MIPS_DEC_KN02XA_H
#define __ASM_MIPS_DEC_KN02XA_H
-#include <asm/addrspace.h>
#include <asm/dec/ioasic_addrs.h>
-#define KN02XA_SLOT_BASE KSEG1ADDR(0x1c000000)
-
-/*
- * Some port addresses...
- */
-#define KN02XA_IOASIC_BASE (KN02XA_SLOT_BASE + IOASIC_IOCTL) /* I/O ASIC */
-#define KN02XA_RTC_BASE (KN02XA_SLOT_BASE + IOASIC_TOY) /* RTC */
-
+#define KN02XA_SLOT_BASE 0x1c000000
/*
* Memory control ASIC registers.
*/
-#define KN02XA_MER KSEG1ADDR(0x0c400000) /* memory error register */
-#define KN02XA_MSR KSEG1ADDR(0x0c800000) /* memory size register */
+#define KN02XA_MER 0x0c400000 /* memory error register */
+#define KN02XA_MSR 0x0c800000 /* memory size register */
/*
* CPU control ASIC registers.
*/
-#define KN02XA_MEM_CONF KSEG1ADDR(0x0e000000) /* write timeout config */
-#define KN02XA_EAR KSEG1ADDR(0x0e000004) /* error address register */
-#define KN02XA_BOOT0 KSEG1ADDR(0x0e000008) /* boot 0 register */
-#define KN02XA_MEM_INTR KSEG1ADDR(0x0e00000c) /* write err IRQ stat & ack */
+#define KN02XA_MEM_CONF 0x0e000000 /* write timeout config */
+#define KN02XA_EAR 0x0e000004 /* error address register */
+#define KN02XA_BOOT0 0x0e000008 /* boot 0 register */
+#define KN02XA_MEM_INTR 0x0e00000c /* write err IRQ stat & ack */
/*
* Memory Error Register bits, common definitions.
@@ -52,8 +44,13 @@
#define KN02XA_MER_PAGERR (1<<16) /* 2k page boundary error */
#define KN02XA_MER_TRANSERR (1<<15) /* transfer length error */
#define KN02XA_MER_PARDIS (1<<14) /* parity error disable */
-#define KN02XA_MER_RES_12 (0x3<<12) /* unused */
-#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask */
+#define KN02XA_MER_SIZE (1<<13) /* r/o mirror of MSR_SIZE */
+#define KN02XA_MER_RES_12 (1<<12) /* unused */
+#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask: */
+#define KN02XA_MER_BYTERR_3 (0x8<<8) /* byte lane #3 */
+#define KN02XA_MER_BYTERR_2 (0x4<<8) /* byte lane #2 */
+#define KN02XA_MER_BYTERR_1 (0x2<<8) /* byte lane #1 */
+#define KN02XA_MER_BYTERR_0 (0x1<<8) /* byte lane #0 */
#define KN02XA_MER_RES_0 (0xff<<0) /* unused */
/*
@@ -72,4 +69,17 @@
#define KN02XA_EAR_ADDRESS (0x7ffffff<<2) /* address involved */
#define KN02XA_EAR_RES_0 (0x3<<0) /* unused */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_kn02xa_be_init(void);
+extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+#endif
+
#endif /* __ASM_MIPS_DEC_KN02XA_H */
diff --git a/include/asm-mips/dec/kn03.h b/include/asm-mips/dec/kn03.h
index 676abd1..edede92 100644
--- a/include/asm-mips/dec/kn03.h
+++ b/include/asm-mips/dec/kn03.h
@@ -10,24 +10,15 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN03_H
#define __ASM_MIPS_DEC_KN03_H
-#include <asm/addrspace.h>
#include <asm/dec/ecc.h>
#include <asm/dec/ioasic_addrs.h>
-#define KN03_SLOT_BASE KSEG1ADDR(0x1f800000)
-
-/*
- * Some port addresses...
- */
-#define KN03_IOASIC_BASE (KN03_SLOT_BASE + IOASIC_IOCTL) /* I/O ASIC */
-#define KN03_RTC_BASE (KN03_SLOT_BASE + IOASIC_TOY) /* RTC */
-#define KN03_MCR_BASE (KN03_SLOT_BASE + IOASIC_MCR) /* MCR */
-
+#define KN03_SLOT_BASE 0x1f800000
/*
* CPU interrupt bits.
diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h
index b120362..15fe8f8 100644
--- a/include/asm-mips/dec/kn05.h
+++ b/include/asm-mips/dec/kn05.h
@@ -1,10 +1,12 @@
/*
* include/asm-mips/dec/kn05.h
*
- * DECstation 5000/260 (4max+ or KN05) and DECsystem 5900/260
+ * DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
+ * or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
+ * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
* definitions.
*
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -13,8 +15,8 @@
*
* WARNING! All this information is pure guesswork based on the
* ROM. It is provided here in hope it will give someone some
- * food for thought. No documentation for the KN05 module has
- * been located so far.
+ * food for thought. No documentation for the KN05 nor the KN04
+ * module has been located so far.
*/
#ifndef __ASM_MIPS_DEC_KN05_H
#define __ASM_MIPS_DEC_KN05_H
@@ -24,48 +26,50 @@
/*
* The oncard MB (Memory Buffer) ASIC provides an additional address
* decoder. Certain address ranges within the "high" 16 slots are
- * passed to the I/O ASIC's decoder like with the KN03. Others are
- * handled locally. "Low" slots are always passed.
+ * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
+ * Others are handled locally. "Low" slots are always passed.
*/
-#define KN05_MB_ROM (16*IOASIC_SLOT_SIZE) /* KN05 card ROM */
-#define KN05_IOCTL (17*IOASIC_SLOT_SIZE) /* I/O ASIC */
-#define KN05_ESAR (18*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */
-#define KN05_LANCE (19*IOASIC_SLOT_SIZE) /* LANCE Ethernet */
-#define KN05_MB_INT (20*IOASIC_SLOT_SIZE) /* MB interrupt register */
-#define KN05_MB_EA (21*IOASIC_SLOT_SIZE) /* MB error address? */
-#define KN05_MB_EC (22*IOASIC_SLOT_SIZE) /* MB error ??? */
-#define KN05_MB_CSR (23*IOASIC_SLOT_SIZE) /* MB control & status */
-#define KN05_RES_24 (24*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_25 (25*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_26 (26*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_27 (27*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_SCSI (28*IOASIC_SLOT_SIZE) /* ASC SCSI */
-#define KN05_RES_29 (29*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_30 (30*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_31 (31*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_SLOT_BASE 0x1fc00000
+
+#define KN4K_MB_ROM (0*IOASIC_SLOT_SIZE) /* KN05/KN04 card ROM */
+#define KN4K_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */
+#define KN4K_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */
+#define KN4K_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */
+#define KN4K_MB_INT (4*IOASIC_SLOT_SIZE) /* MB interrupt register */
+#define KN4K_MB_EA (5*IOASIC_SLOT_SIZE) /* MB error address? */
+#define KN4K_MB_EC (6*IOASIC_SLOT_SIZE) /* MB error ??? */
+#define KN4K_MB_CSR (7*IOASIC_SLOT_SIZE) /* MB control & status */
+#define KN4K_RES_08 (8*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_09 (9*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_10 (10*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_11 (11*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */
+#define KN4K_RES_13 (13*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_14 (14*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */
/*
* Bits for the MB interrupt register.
* The register appears read-only.
*/
-#define KN05_MB_INT_TC (1<<0) /* TURBOchannel? */
-#define KN05_MB_INT_RTC (1<<1) /* RTC? */
-#define KN05_MB_INT_MT (1<<3) /* ??? */
+#define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */
+#define KN4K_MB_INT_RTC (1<<1) /* RTC? */
+#define KN4K_MB_INT_MT (1<<3) /* ??? */
/*
* Bits for the MB control & status register.
* Set to 0x00bf8001 on my system by the ROM.
*/
-#define KN05_MB_CSR_PF (1<<0) /* PreFetching enable? */
-#define KN05_MB_CSR_F (1<<1) /* ??? */
-#define KN05_MB_CSR_ECC (0xff<<2) /* ??? */
-#define KN05_MB_CSR_OD (1<<10) /* ??? */
-#define KN05_MB_CSR_CP (1<<11) /* ??? */
-#define KN05_MB_CSR_UNC (1<<12) /* ??? */
-#define KN05_MB_CSR_IM (1<<13) /* ??? */
-#define KN05_MB_CSR_NC (1<<14) /* ??? */
-#define KN05_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */
-#define KN05_MB_CSR_MSK (0x1f<<16) /* ??? */
-#define KN05_MB_CSR_FW (1<<21) /* ??? */
+#define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */
+#define KN4K_MB_CSR_F (1<<1) /* ??? */
+#define KN4K_MB_CSR_ECC (0xff<<2) /* ??? */
+#define KN4K_MB_CSR_OD (1<<10) /* ??? */
+#define KN4K_MB_CSR_CP (1<<11) /* ??? */
+#define KN4K_MB_CSR_UNC (1<<12) /* ??? */
+#define KN4K_MB_CSR_IM (1<<13) /* ??? */
+#define KN4K_MB_CSR_NC (1<<14) /* ??? */
+#define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */
+#define KN4K_MB_CSR_MSK (0x1f<<16) /* ??? */
+#define KN4K_MB_CSR_FW (1<<21) /* ??? */
#endif /* __ASM_MIPS_DEC_KN05_H */
diff --git a/include/asm-mips/dec/prom.h b/include/asm-mips/dec/prom.h
index a05d6d3..1384dd0 100644
--- a/include/asm-mips/dec/prom.h
+++ b/include/asm-mips/dec/prom.h
@@ -24,7 +24,7 @@
* PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's.
* Many of these will work for MIPSen as well!
*/
-#define VEC_RESET (u64 *)KSEG1ADDR(0x1fc00000)
+#define VEC_RESET (u64 *)CKSEG1ADDR(0x1fc00000)
/* Prom base address */
#define PMAX_PROM_ENTRY(x) (VEC_RESET + (x)) /* Prom jump table */
@@ -111,19 +111,21 @@
* On MIPS64 we have to call PROM functions via a helper
* dispatcher to accomodate ABI incompatibilities.
*/
-#define __DEC_PROM_O32 __attribute__((alias("call_o32")))
+#define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \
+ __asm__(#fun " = call_o32")
-int _rex_bootinit(int (*)(void)) __DEC_PROM_O32;
-int _rex_bootread(int (*)(void)) __DEC_PROM_O32;
-int _rex_getbitmap(int (*)(memmap *), memmap *) __DEC_PROM_O32;
-unsigned long *_rex_slot_address(unsigned long *(*)(int), int) __DEC_PROM_O32;
-void *_rex_gettcinfo(void *(*)(void)) __DEC_PROM_O32;
-int _rex_getsysid(int (*)(void)) __DEC_PROM_O32;
-void _rex_clear_cache(void (*)(void)) __DEC_PROM_O32;
+int __DEC_PROM_O32(_rex_bootinit, (int (*)(void)));
+int __DEC_PROM_O32(_rex_bootread, (int (*)(void)));
+int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *));
+unsigned long *__DEC_PROM_O32(_rex_slot_address,
+ (unsigned long *(*)(int), int));
+void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void)));
+int __DEC_PROM_O32(_rex_getsysid, (int (*)(void)));
+void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void)));
-int _prom_getchar(int (*)(void)) __DEC_PROM_O32;
-char *_prom_getenv(char *(*)(char *), char *) __DEC_PROM_O32;
-int _prom_printf(int (*)(char *, ...), char *, ...) __DEC_PROM_O32;
+int __DEC_PROM_O32(_prom_getchar, (int (*)(void)));
+char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *));
+int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...));
#define rex_bootinit() _rex_bootinit(__rex_bootinit)
diff --git a/include/asm-mips/dec/system.h b/include/asm-mips/dec/system.h
new file mode 100644
index 0000000..78af51f
--- /dev/null
+++ b/include/asm-mips/dec/system.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-mips/dec/system.h
+ *
+ * Generic DECstation/DECsystem bits.
+ *
+ * Copyright (C) 2005 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_DEC_SYSTEM_H
+#define __ASM_DEC_SYSTEM_H
+
+extern unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+#endif /* __ASM_DEC_SYSTEM_H */
diff --git a/include/asm-mips/dec/tc.h b/include/asm-mips/dec/tc.h
index d7bba43..9cb51f2 100644
--- a/include/asm-mips/dec/tc.h
+++ b/include/asm-mips/dec/tc.h
@@ -7,10 +7,8 @@
*
* Copyright (c) 1998 Harald Koerfgen
*/
-#ifndef ASM_TC_H
-#define ASM_TC_H
-
-extern unsigned long system_base;
+#ifndef __ASM_DEC_TC_H
+#define __ASM_DEC_TC_H
/*
* Search for a TURBOchannel Option Module
@@ -36,8 +34,8 @@
*/
extern unsigned long get_tc_irq_nr(int);
/*
- * Return TURBOchannel clock frequency in hz
+ * Return TURBOchannel clock frequency in Hz
*/
extern unsigned long get_tc_speed(void);
-#endif
+#endif /* __ASM_DEC_TC_H */
diff --git a/include/asm-mips/delay.h b/include/asm-mips/delay.h
index a606dbe..85435a8 100644
--- a/include/asm-mips/delay.h
+++ b/include/asm-mips/delay.h
@@ -12,11 +12,9 @@
#include <linux/config.h>
#include <linux/param.h>
-
+#include <linux/smp.h>
#include <asm/compiler.h>
-extern unsigned long loops_per_jiffy;
-
static inline void __delay(unsigned long loops)
{
if (sizeof(long) == 4)
@@ -82,11 +80,7 @@
__delay(usecs);
}
-#ifdef CONFIG_SMP
#define __udelay_val cpu_data[smp_processor_id()].udelay_val
-#else
-#define __udelay_val loops_per_jiffy
-#endif
#define udelay(usecs) __udelay((usecs),__udelay_val)
diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h
index af28dc8..4328863 100644
--- a/include/asm-mips/dma-mapping.h
+++ b/include/asm-mips/dma-mapping.h
@@ -5,13 +5,13 @@
#include <asm/cache.h>
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag);
+ dma_addr_t *dma_handle, gfp_t flag);
void dma_free_noncoherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag);
+ dma_addr_t *dma_handle, gfp_t flag);
void dma_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
diff --git a/include/asm-mips/dsp.h b/include/asm-mips/dsp.h
new file mode 100644
index 0000000..50f556b
--- /dev/null
+++ b/include/asm-mips/dsp.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2005 Mips Technologies
+ * Author: Chris Dearman, chris@mips.com derived from fpu.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_DSP_H
+#define _ASM_DSP_H
+
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/hazards.h>
+#include <asm/mipsregs.h>
+
+#define DSP_DEFAULT 0x00000000
+#define DSP_MASK 0x1f
+
+#define __enable_dsp_hazard() \
+do { \
+ asm("_ehb"); \
+} while (0)
+
+static inline void __init_dsp(void)
+{
+ mthi1(0);
+ mtlo1(0);
+ mthi2(0);
+ mtlo2(0);
+ mthi3(0);
+ mtlo3(0);
+ wrdsp(DSP_DEFAULT, DSP_MASK);
+}
+
+static inline void init_dsp(void)
+{
+ if (cpu_has_dsp)
+ __init_dsp();
+}
+
+#define __save_dsp(tsk) \
+do { \
+ tsk->thread.dsp.dspr[0] = mfhi1(); \
+ tsk->thread.dsp.dspr[1] = mflo1(); \
+ tsk->thread.dsp.dspr[2] = mfhi2(); \
+ tsk->thread.dsp.dspr[3] = mflo2(); \
+ tsk->thread.dsp.dspr[4] = mfhi3(); \
+ tsk->thread.dsp.dspr[5] = mflo3(); \
+} while (0)
+
+#define save_dsp(tsk) \
+do { \
+ if (cpu_has_dsp) \
+ __save_dsp(tsk); \
+} while (0)
+
+#define __restore_dsp(tsk) \
+do { \
+ mthi1(tsk->thread.dsp.dspr[0]); \
+ mtlo1(tsk->thread.dsp.dspr[1]); \
+ mthi2(tsk->thread.dsp.dspr[2]); \
+ mtlo2(tsk->thread.dsp.dspr[3]); \
+ mthi3(tsk->thread.dsp.dspr[4]); \
+ mtlo3(tsk->thread.dsp.dspr[5]); \
+} while (0)
+
+#define restore_dsp(tsk) \
+do { \
+ if (cpu_has_dsp) \
+ __restore_dsp(tsk); \
+} while (0)
+
+#define __get_dsp_regs(tsk) \
+({ \
+ if (tsk == current) \
+ __save_dsp(current); \
+ \
+ tsk->thread.dsp.dspr; \
+})
+
+#endif /* _ASM_DSP_H */
diff --git a/include/asm-mips/elf.h b/include/asm-mips/elf.h
index e488114..7420f12 100644
--- a/include/asm-mips/elf.h
+++ b/include/asm-mips/elf.h
@@ -2,6 +2,8 @@
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
+ *
+ * Much of this is taken from binutils and GNU libc ...
*/
#ifndef _ASM_ELF_H
#define _ASM_ELF_H
@@ -17,6 +19,8 @@
#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
#define EF_MIPS_ARCH_32 0x50000000 /* MIPS32 code. */
#define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */
+#define EF_MIPS_ARCH_32R2 0x70000000 /* MIPS32 R2 code. */
+#define EF_MIPS_ARCH_64R2 0x80000000 /* MIPS64 R2 code. */
/* The ABI of a file. */
#define EF_MIPS_ABI_O32 0x00001000 /* O32 ABI. */
@@ -105,7 +109,11 @@
#define R_MIPS_LOVENDOR 100
#define R_MIPS_HIVENDOR 127
-#define SHN_MIPS_ACCOMON 0xff00
+#define SHN_MIPS_ACCOMON 0xff00 /* Allocated common symbols */
+#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */
+#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */
+#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */
+#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */
#define SHT_MIPS_LIST 0x70000000
#define SHT_MIPS_CONFLICT 0x70000002
@@ -193,50 +201,92 @@
#ifdef __KERNEL__
+struct mips_abi;
+
+extern struct mips_abi mips_abi;
+extern struct mips_abi mips_abi_32;
+extern struct mips_abi mips_abi_n32;
+
#ifdef CONFIG_32BIT
-#define SET_PERSONALITY(ex, ibcs2) \
-do { \
- if (ibcs2) \
- set_personality(PER_SVR4); \
- set_personality(PER_LINUX); \
+#define SET_PERSONALITY(ex, ibcs2) \
+do { \
+ if (ibcs2) \
+ set_personality(PER_SVR4); \
+ set_personality(PER_LINUX); \
+ \
+ current->thread.abi = &mips_abi; \
} while (0)
#endif /* CONFIG_32BIT */
#ifdef CONFIG_64BIT
-#define SET_PERSONALITY(ex, ibcs2) \
-do { current->thread.mflags &= ~MF_ABI_MASK; \
- if ((ex).e_ident[EI_CLASS] == ELFCLASS32) { \
- if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \
- ((ex).e_flags & EF_MIPS_ABI) == 0) \
- current->thread.mflags |= MF_N32; \
- else \
- current->thread.mflags |= MF_O32; \
- } else \
- current->thread.mflags |= MF_N64; \
- if (ibcs2) \
- set_personality(PER_SVR4); \
- else if (current->personality != PER_LINUX32) \
- set_personality(PER_LINUX); \
+#ifdef CONFIG_MIPS32_N32
+#define __SET_PERSONALITY32_N32() \
+ do { \
+ current->thread.mflags |= MF_N32; \
+ current->thread.abi = &mips_abi_n32; \
+ } while (0)
+#else
+#define __SET_PERSONALITY32_N32() \
+ do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_O32
+#define __SET_PERSONALITY32_O32() \
+ do { \
+ current->thread.mflags |= MF_O32; \
+ current->thread.abi = &mips_abi_32; \
+ } while (0)
+#else
+#define __SET_PERSONALITY32_O32() \
+ do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_COMPAT
+#define __SET_PERSONALITY32(ex) \
+do { \
+ if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \
+ ((ex).e_flags & EF_MIPS_ABI) == 0) \
+ __SET_PERSONALITY32_N32(); \
+ else \
+ __SET_PERSONALITY32_O32(); \
+} while (0)
+#else
+#define __SET_PERSONALITY32(ex) do { } while (0)
+#endif
+
+#define SET_PERSONALITY(ex, ibcs2) \
+do { \
+ current->thread.mflags &= ~MF_ABI_MASK; \
+ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
+ __SET_PERSONALITY32(ex); \
+ else { \
+ current->thread.mflags |= MF_N64; \
+ current->thread.abi = &mips_abi; \
+ } \
+ \
+ if (ibcs2) \
+ set_personality(PER_SVR4); \
+ else if (current->personality != PER_LINUX32) \
+ set_personality(PER_LINUX); \
} while (0)
#endif /* CONFIG_64BIT */
extern void dump_regs(elf_greg_t *, struct pt_regs *regs);
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
#define ELF_CORE_COPY_REGS(elf_regs, regs) \
dump_regs((elf_greg_t *)&(elf_regs), regs);
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \
dump_task_fpu(tsk, elf_fpregs)
#endif /* __KERNEL__ */
-/* This one accepts IRIX binaries. */
-#define irix_elf_check_arch(hdr) ((hdr)->e_flags & RHF_SGI_ONLY)
-
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE PAGE_SIZE
diff --git a/include/asm-mips/errno.h b/include/asm-mips/errno.h
index 3c0d840..9d3e6e7 100644
--- a/include/asm-mips/errno.h
+++ b/include/asm-mips/errno.h
@@ -119,6 +119,10 @@
#define EOWNERDEAD 165 /* Owner died */
#define ENOTRECOVERABLE 166 /* State not recoverable */
+/* for robust mutexes */
+#define EOWNERDEAD 165 /* Owner died */
+#define ENOTRECOVERABLE 166 /* State not recoverable */
+
#define EDQUOT 1133 /* Quota exceeded */
#ifdef __KERNEL__
diff --git a/include/asm-mips/fcntl.h b/include/asm-mips/fcntl.h
index 06c5d13..43d047a 100644
--- a/include/asm-mips/fcntl.h
+++ b/include/asm-mips/fcntl.h
@@ -3,11 +3,13 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1995, 96, 97, 98, 99, 2003 Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle
*/
#ifndef _ASM_FCNTL_H
#define _ASM_FCNTL_H
+#include <linux/config.h>
+
#define O_APPEND 0x0008
#define O_SYNC 0x0010
#define O_NONBLOCK 0x0080
@@ -40,13 +42,13 @@
* contain all the same fields as struct flock.
*/
-#ifndef __mips64
+#ifdef CONFIG_32BIT
struct flock {
short l_type;
short l_whence;
- __kernel_off_t l_start;
- __kernel_off_t l_len;
+ off_t l_start;
+ off_t l_len;
long l_sysid;
__kernel_pid_t l_pid;
long pad[4];
@@ -54,13 +56,8 @@
#define HAVE_ARCH_STRUCT_FLOCK
-#endif
+#endif /* CONFIG_32BIT */
#include <asm-generic/fcntl.h>
-typedef struct flock flock_t;
-#ifndef __mips64
-typedef struct flock64 flock64_t;
-#endif
-
#endif /* _ASM_FCNTL_H */
diff --git a/include/asm-mips/fixmap.h b/include/asm-mips/fixmap.h
index 26b6a90..73a3028 100644
--- a/include/asm-mips/fixmap.h
+++ b/include/asm-mips/fixmap.h
@@ -107,4 +107,11 @@
return __virt_to_fix(vaddr);
}
+/*
+ * Called from pgtable_init()
+ */
+extern void fixrange_init(unsigned long start, unsigned long end,
+ pgd_t *pgd_base);
+
+
#endif
diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h
index ea24e73..9c828b1 100644
--- a/include/asm-mips/fpu.h
+++ b/include/asm-mips/fpu.h
@@ -80,9 +80,14 @@
#define clear_fpu_owner() clear_thread_flag(TIF_USEDFPU)
+static inline int __is_fpu_owner(void)
+{
+ return test_thread_flag(TIF_USEDFPU);
+}
+
static inline int is_fpu_owner(void)
{
- return cpu_has_fpu && test_thread_flag(TIF_USEDFPU);
+ return cpu_has_fpu && __is_fpu_owner();
}
static inline void own_fpu(void)
@@ -127,7 +132,7 @@
static inline fpureg_t *get_fpu_regs(struct task_struct *tsk)
{
if (cpu_has_fpu) {
- if ((tsk == current) && is_fpu_owner())
+ if ((tsk == current) && __is_fpu_owner())
_save_fp(current);
return tsk->thread.fpu.hard.fpr;
}
diff --git a/include/asm-mips/fpu_emulator.h b/include/asm-mips/fpu_emulator.h
index 46972ae..16cb4d1 100644
--- a/include/asm-mips/fpu_emulator.h
+++ b/include/asm-mips/fpu_emulator.h
@@ -23,16 +23,15 @@
#ifndef _ASM_FPU_EMULATOR_H
#define _ASM_FPU_EMULATOR_H
-struct mips_fpu_emulator_private {
- unsigned int eir;
- struct {
- unsigned int emulated;
- unsigned int loads;
- unsigned int stores;
- unsigned int cp1ops;
- unsigned int cp1xops;
- unsigned int errors;
- } stats;
+struct mips_fpu_emulator_stats {
+ unsigned int emulated;
+ unsigned int loads;
+ unsigned int stores;
+ unsigned int cp1ops;
+ unsigned int cp1xops;
+ unsigned int errors;
};
+extern struct mips_fpu_emulator_stats fpuemustats;
+
#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h
index 9feff4c..2454c44 100644
--- a/include/asm-mips/futex.h
+++ b/include/asm-mips/futex.h
@@ -3,10 +3,45 @@
#ifdef __KERNEL__
+#include <linux/config.h>
#include <linux/futex.h>
#include <asm/errno.h>
#include <asm/uaccess.h>
+#ifdef CONFIG_SMP
+#define __FUTEX_SMP_SYNC " sync \n"
+#else
+#define __FUTEX_SMP_SYNC
+#endif
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+{ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: ll %1, (%3) # __futex_atomic_op1 \n" \
+ " .set mips0 \n" \
+ " " insn " \n" \
+ " .set mips3 \n" \
+ "2: sc $1, (%3) \n" \
+ " beqzl $1, 1b \n" \
+ __FUTEX_SMP_SYNC \
+ "3: \n" \
+ " .set pop \n" \
+ " .set mips0 \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %5 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 4b \n" \
+ " "__UA_ADDR "\t2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (ret), "=r" (oldval) \
+ : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
+}
+
static inline int
futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
{
@@ -25,10 +60,25 @@
switch (op) {
case FUTEX_OP_SET:
+ __futex_atomic_op("move $1, %z4", ret, oldval, uaddr, oparg);
+ break;
+
case FUTEX_OP_ADD:
+ __futex_atomic_op("addu $1, %1, %z4",
+ ret, oldval, uaddr, oparg);
+ break;
case FUTEX_OP_OR:
+ __futex_atomic_op("or $1, %1, %z4",
+ ret, oldval, uaddr, oparg);
+ break;
case FUTEX_OP_ANDN:
+ __futex_atomic_op("and $1, %1, %z4",
+ ret, oldval, uaddr, ~oparg);
+ break;
case FUTEX_OP_XOR:
+ __futex_atomic_op("xor $1, %1, %z4",
+ ret, oldval, uaddr, oparg);
+ break;
default:
ret = -ENOSYS;
}
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index f524eac..7517189 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -74,7 +74,8 @@
#define irq_disable_hazard
_ehb
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+ defined(CONFIG_CPU_SB1)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -107,6 +108,7 @@
" .endm \n\t");
#ifdef CONFIG_CPU_RM9000
+
/*
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
@@ -124,6 +126,9 @@
".set\tmips32\n\t" \
"_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
".set\tmips0")
+
+#define back_to_back_c0_hazard() do { } while (0)
+
#else
/*
@@ -144,15 +149,13 @@
#endif
/*
- * mtc0->mfc0 hazard
- * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
- * It is a MIPS32R2 processor so ehb will clear the hazard.
+ * Interrupt enable/disable hazards
+ * Some processors have hazards when modifying
+ * the status register to change the interrupt state
*/
#ifdef CONFIG_CPU_MIPSR2
-/*
- * Use a macro for ehb unless explicit support for MIPSR2 is enabled
- */
+
__asm__(
" .macro\tirq_enable_hazard \n\t"
" _ehb \n\t"
@@ -160,17 +163,26 @@
" \n\t"
" .macro\tirq_disable_hazard \n\t"
" _ehb \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tback_to_back_c0_hazard \n\t"
+ " _ehb \n\t"
" .endm");
#define irq_enable_hazard() \
__asm__ __volatile__( \
- "_ehb\t\t\t\t# irq_enable_hazard")
+ "irq_enable_hazard")
#define irq_disable_hazard() \
__asm__ __volatile__( \
- "_ehb\t\t\t\t# irq_disable_hazard")
+ "irq_disable_hazard")
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+#define back_to_back_c0_hazard() \
+ __asm__ __volatile__( \
+ "back_to_back_c0_hazard")
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+ defined(CONFIG_CPU_SB1)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -186,6 +198,8 @@
#define irq_enable_hazard() do { } while (0)
#define irq_disable_hazard() do { } while (0)
+#define back_to_back_c0_hazard() do { } while (0)
+
#else
/*
@@ -208,8 +222,30 @@
#define irq_enable_hazard() do { } while (0)
#define irq_disable_hazard() \
__asm__ __volatile__( \
- "_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
+ "irq_disable_hazard")
+#define back_to_back_c0_hazard() \
+ __asm__ __volatile__( \
+ " .set noreorder \n" \
+ " nop; nop; nop \n" \
+ " .set reorder \n")
+
+#endif
+
+#ifdef CONFIG_CPU_MIPSR2
+#define instruction_hazard() \
+do { \
+__label__ __next; \
+ __asm__ __volatile__( \
+ " jr.hb %0 \n" \
+ : \
+ : "r" (&&__next)); \
+__next: \
+ ; \
+} while (0)
+
+#else
+#define instruction_hazard() do { } while (0)
#endif
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-mips/highmem.h b/include/asm-mips/highmem.h
index f49930d..8cf5984 100644
--- a/include/asm-mips/highmem.h
+++ b/include/asm-mips/highmem.h
@@ -75,6 +75,7 @@
}
static inline void kunmap_atomic(void *kvaddr, enum km_type type) { }
+#define kmap_atomic_pfn(pfn, idx) page_address(pfn_to_page(pfn))
#define kmap_atomic_to_page(ptr) virt_to_page(ptr)
@@ -86,6 +87,7 @@
extern void __kunmap(struct page *page);
extern void *__kmap_atomic(struct page *page, enum km_type type);
extern void __kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
extern struct page *__kmap_atomic_to_page(void *ptr);
#define kmap __kmap
diff --git a/include/asm-mips/inst.h b/include/asm-mips/inst.h
index 6ad5172..e0745f4 100644
--- a/include/asm-mips/inst.h
+++ b/include/asm-mips/inst.h
@@ -28,7 +28,7 @@
sdl_op, sdr_op, swr_op, cache_op,
ll_op, lwc1_op, lwc2_op, pref_op,
lld_op, ldc1_op, ldc2_op, ld_op,
- sc_op, swc1_op, swc2_op, major_3b_op, /* Opcode 0x3b is unused */
+ sc_op, swc1_op, swc2_op, rdhwr_op,
scd_op, sdc1_op, sdc2_op, sd_op
};
@@ -62,10 +62,10 @@
spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07,
tgei_op, tgeiu_op, tlti_op, tltiu_op,
teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op,
- bltzal_op, bgezal_op, bltzall_op, bgezall_op
- /*
- * The others (0x14 - 0x1f) are unused.
- */
+ bltzal_op, bgezal_op, bltzall_op, bgezall_op,
+ rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17,
+ rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b,
+ bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f
};
/*
diff --git a/include/asm-mips/interrupt.h b/include/asm-mips/interrupt.h
index e8357f5..a573576 100644
--- a/include/asm-mips/interrupt.h
+++ b/include/asm-mips/interrupt.h
@@ -11,20 +11,25 @@
#ifndef _ASM_INTERRUPT_H
#define _ASM_INTERRUPT_H
+#include <linux/config.h>
#include <asm/hazards.h>
__asm__ (
- ".macro\tlocal_irq_enable\n\t"
- ".set\tpush\n\t"
- ".set\treorder\n\t"
- ".set\tnoat\n\t"
- "mfc0\t$1,$12\n\t"
- "ori\t$1,0x1f\n\t"
- "xori\t$1,0x1e\n\t"
- "mtc0\t$1,$12\n\t"
- "irq_enable_hazard\n\t"
- ".set\tpop\n\t"
- ".endm");
+ " .macro local_irq_enable \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_CPU_MIPSR2
+ " ei \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1e \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_enable_hazard \n"
+ " .set pop \n"
+ " .endm");
static inline void local_irq_enable(void)
{
@@ -43,17 +48,21 @@
* no nops at all.
*/
__asm__ (
- ".macro\tlocal_irq_disable\n\t"
- ".set\tpush\n\t"
- ".set\tnoat\n\t"
- "mfc0\t$1,$12\n\t"
- "ori\t$1,1\n\t"
- "xori\t$1,1\n\t"
- ".set\tnoreorder\n\t"
- "mtc0\t$1,$12\n\t"
- "irq_disable_hazard\n\t"
- ".set\tpop\n\t"
- ".endm");
+ " .macro local_irq_disable\n"
+ " .set push \n"
+ " .set noat \n"
+#ifdef CONFIG_CPU_MIPSR2
+ " di \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,1 \n"
+ " xori $1,1 \n"
+ " .set noreorder \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
static inline void local_irq_disable(void)
{
@@ -65,12 +74,12 @@
}
__asm__ (
- ".macro\tlocal_save_flags flags\n\t"
- ".set\tpush\n\t"
- ".set\treorder\n\t"
- "mfc0\t\\flags, $12\n\t"
- ".set\tpop\n\t"
- ".endm");
+ " .macro local_save_flags flags \n"
+ " .set push \n"
+ " .set reorder \n"
+ " mfc0 \\flags, $12 \n"
+ " .set pop \n"
+ " .endm \n");
#define local_save_flags(x) \
__asm__ __volatile__( \
@@ -78,18 +87,22 @@
: "=r" (x))
__asm__ (
- ".macro\tlocal_irq_save result\n\t"
- ".set\tpush\n\t"
- ".set\treorder\n\t"
- ".set\tnoat\n\t"
- "mfc0\t\\result, $12\n\t"
- "ori\t$1, \\result, 1\n\t"
- "xori\t$1, 1\n\t"
- ".set\tnoreorder\n\t"
- "mtc0\t$1, $12\n\t"
- "irq_disable_hazard\n\t"
- ".set\tpop\n\t"
- ".endm");
+ " .macro local_irq_save result \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_CPU_MIPSR2
+ " di \\result \n"
+#else
+ " mfc0 \\result, $12 \n"
+ " ori $1, \\result, 1 \n"
+ " xori $1, 1 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
#define local_irq_save(x) \
__asm__ __volatile__( \
@@ -99,19 +112,37 @@
: "memory")
__asm__ (
- ".macro\tlocal_irq_restore flags\n\t"
- ".set\tnoreorder\n\t"
- ".set\tnoat\n\t"
- "mfc0\t$1, $12\n\t"
- "andi\t\\flags, 1\n\t"
- "ori\t$1, 1\n\t"
- "xori\t$1, 1\n\t"
- "or\t\\flags, $1\n\t"
- "mtc0\t\\flags, $12\n\t"
- "irq_disable_hazard\n\t"
- ".set\tat\n\t"
- ".set\treorder\n\t"
- ".endm");
+ " .macro local_irq_restore flags \n"
+ " .set noreorder \n"
+ " .set noat \n"
+#if defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+ /*
+ * Slow, but doesn't suffer from a relativly unlikely race
+ * condition we're having since days 1.
+ */
+ " beqz \\flags, 1f \n"
+ " di \n"
+ " ei \n"
+ "1: \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /*
+ * Fast, dangerous. Life is fun, life is good.
+ */
+ " mfc0 $1, $12 \n"
+ " ins $1, \\flags, 0, 1 \n"
+ " mtc0 $1, $12 \n"
+#else
+ " mfc0 $1, $12 \n"
+ " andi \\flags, 1 \n"
+ " ori $1, 1 \n"
+ " xori $1, 1 \n"
+ " or \\flags, $1 \n"
+ " mtc0 \\flags, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set at \n"
+ " .set reorder \n"
+ " .endm \n");
#define local_irq_restore(flags) \
do { \
diff --git a/include/asm-mips/inventory.h b/include/asm-mips/inventory.h
index 4cd36fe..92d90f7 100644
--- a/include/asm-mips/inventory.h
+++ b/include/asm-mips/inventory.h
@@ -4,6 +4,8 @@
#ifndef __ASM_INVENTORY_H
#define __ASM_INVENTORY_H
+#include <linux/compiler.h>
+
typedef struct inventory_s {
struct inventory_s *inv_next;
int inv_class;
@@ -14,7 +16,9 @@
} inventory_t;
extern int inventory_items;
-void add_to_inventory (int class, int type, int controller, int unit, int state);
-int dump_inventory_to_user (void *userbuf, int size);
+
+extern void add_to_inventory (int class, int type, int controller, int unit, int state);
+extern int dump_inventory_to_user (void __user *userbuf, int size);
+extern int __init init_inventory(void);
#endif /* __ASM_INVENTORY_H */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 039845f..3061870 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -25,7 +25,9 @@
#include <asm/page.h>
#include <asm/pgtable-bits.h>
#include <asm/processor.h>
+#include <asm/string.h>
+#include <ioremap.h>
#include <mangle-port.h>
/*
@@ -34,7 +36,7 @@
#undef CONF_SLOWDOWN_IO
/*
- * Raw operations are never swapped in software. Otoh values that raw
+ * Raw operations are never swapped in software. OTOH values that raw
* operations are working on may or may not have been swapped by the bus
* hardware. An example use would be for flash memory that's used for
* execute in place.
@@ -43,45 +45,53 @@
# define __raw_ioswabw(x) (x)
# define __raw_ioswabl(x) (x)
# define __raw_ioswabq(x) (x)
+# define ____raw_ioswabq(x) (x)
/*
* Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
* less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time. Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses. The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "mem_" prefix.
*/
#if defined(CONFIG_SWAP_IO_SPACE)
# define ioswabb(x) (x)
+# define mem_ioswabb(x) (x)
# ifdef CONFIG_SGI_IP22
/*
* IP22 seems braindead enough to swap 16bits values in hardware, but
* not 32bits. Go figure... Can't tell without documentation.
*/
# define ioswabw(x) (x)
+# define mem_ioswabw(x) le16_to_cpu(x)
# else
# define ioswabw(x) le16_to_cpu(x)
+# define mem_ioswabw(x) (x)
# endif
# define ioswabl(x) le32_to_cpu(x)
+# define mem_ioswabl(x) (x)
# define ioswabq(x) le64_to_cpu(x)
+# define mem_ioswabq(x) (x)
#else
# define ioswabb(x) (x)
+# define mem_ioswabb(x) (x)
# define ioswabw(x) (x)
+# define mem_ioswabw(x) cpu_to_le16(x)
# define ioswabl(x) (x)
+# define mem_ioswabl(x) cpu_to_le32(x)
# define ioswabq(x) (x)
+# define mem_ioswabq(x) cpu_to_le32(x)
#endif
-/*
- * Native bus accesses never swapped.
- */
-#define bus_ioswabb(x) (x)
-#define bus_ioswabw(x) (x)
-#define bus_ioswabl(x) (x)
-#define bus_ioswabq(x) (x)
-
-#define __bus_ioswabq bus_ioswabq
-
#define IO_SPACE_LIMIT 0xffff
/*
@@ -194,12 +204,14 @@
*/
#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-extern void * __ioremap(phys_t offset, phys_t size, unsigned long flags);
+extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
extern void __iounmap(volatile void __iomem *addr);
-static inline void * __ioremap_mode(phys_t offset, unsigned long size,
+static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
unsigned long flags)
{
+#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
+
if (cpu_has_64bit_addresses) {
u64 base = UNCAC_BASE;
@@ -209,10 +221,30 @@
*/
if (flags == _CACHE_UNCACHED)
base = (u64) IO_BASE;
- return (void *) (unsigned long) (base + offset);
+ return (void __iomem *) (unsigned long) (base + offset);
+ } else if (__builtin_constant_p(offset) &&
+ __builtin_constant_p(size) && __builtin_constant_p(flags)) {
+ phys_t phys_addr, last_addr;
+
+ phys_addr = fixup_bigphys_addr(offset, size);
+
+ /* Don't allow wraparound or zero size. */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /*
+ * Map uncached objects in the low 512MB of address
+ * space using KSEG1.
+ */
+ if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
+ flags == _CACHE_UNCACHED)
+ return (void __iomem *)CKSEG1ADDR(phys_addr);
}
return __ioremap(offset, size, flags);
+
+#undef __IS_LOW512
}
/*
@@ -264,12 +296,16 @@
static inline void iounmap(volatile void __iomem *addr)
{
- if (cpu_has_64bit_addresses)
+#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
+
+ if (cpu_has_64bit_addresses ||
+ (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
return;
__iounmap(addr);
-}
+#undef __IS_KSEG1
+}
#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \
\
@@ -319,7 +355,8 @@
else if (cpu_has_64bits) { \
unsigned long __flags; \
\
- local_irq_save(__flags); \
+ if (irq) \
+ local_irq_save(__flags); \
__asm__ __volatile__( \
".set mips3" "\t\t# __readq" "\n\t" \
"ld %L0, %1" "\n\t" \
@@ -328,7 +365,8 @@
".set mips0" "\n" \
: "=r" (__val) \
: "m" (*__mem)); \
- local_irq_restore(__flags); \
+ if (irq) \
+ local_irq_restore(__flags); \
} else { \
__val = 0; \
BUG(); \
@@ -349,11 +387,11 @@
\
__val = pfx##ioswab##bwlq(val); \
\
- if (sizeof(type) != sizeof(u64)) { \
- *__addr = __val; \
- slow; \
- } else \
- BUILD_BUG(); \
+ /* Really, we want this to be atomic */ \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ *__addr = __val; \
+ slow; \
} \
\
static inline type pfx##in##bwlq##p(unsigned long port) \
@@ -364,13 +402,10 @@
port = __swizzle_addr_##bwlq(port); \
__addr = (void *)(mips_io_port_base + port); \
\
- if (sizeof(type) != sizeof(u64)) { \
- __val = *__addr; \
- slow; \
- } else { \
- __val = 0; \
- BUILD_BUG(); \
- } \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ __val = *__addr; \
+ slow; \
\
return pfx##ioswab##bwlq(__val); \
}
@@ -379,27 +414,35 @@
\
__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
-#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
+#define BUILDIO_MEM(bwlq, type) \
\
-__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
-__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
-
-#define BUILDIO(bwlq, type) \
- \
-__BUILD_MEMORY_PFX(, bwlq, type) \
__BUILD_MEMORY_PFX(__raw_, bwlq, type) \
-__BUILD_MEMORY_PFX(bus_, bwlq, type) \
-__BUILD_IOPORT_PFX(, bwlq, type) \
-__BUILD_IOPORT_PFX(__raw_, bwlq, type)
+__BUILD_MEMORY_PFX(, bwlq, type) \
+__BUILD_MEMORY_PFX(mem_, bwlq, type) \
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+BUILDIO_MEM(q, u64)
+
+#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
+ __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
+ __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwlq, type) \
+ __BUILD_IOPORT_PFX(, bwlq, type) \
+ __BUILD_IOPORT_PFX(mem_, bwlq, type)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+#ifdef CONFIG_64BIT
+BUILDIO_IOPORT(q, u64)
+#endif
#define __BUILDIO(bwlq, type) \
\
-__BUILD_MEMORY_SINGLE(__bus_, bwlq, type, 0)
-
-BUILDIO(b, u8)
-BUILDIO(w, u16)
-BUILDIO(l, u32)
-BUILDIO(q, u64)
+__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
__BUILDIO(q, u64)
@@ -422,7 +465,7 @@
volatile type *__addr = addr; \
\
while (count--) { \
- __raw_write##bwlq(*__addr, mem); \
+ mem_write##bwlq(*__addr, mem); \
__addr++; \
} \
} \
@@ -433,20 +476,20 @@
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = __raw_read##bwlq(mem); \
+ *__addr = mem_read##bwlq(mem); \
__addr++; \
} \
}
#define __BUILD_IOPORT_STRING(bwlq, type) \
\
-static inline void outs##bwlq(unsigned long port, void *addr, \
+static inline void outs##bwlq(unsigned long port, const void *addr, \
unsigned int count) \
{ \
- volatile type *__addr = addr; \
+ const volatile type *__addr = addr; \
\
while (count--) { \
- __raw_out##bwlq(*__addr, port); \
+ mem_out##bwlq(*__addr, port); \
__addr++; \
} \
} \
@@ -457,7 +500,7 @@
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = __raw_in##bwlq(port); \
+ *__addr = mem_in##bwlq(port); \
__addr++; \
} \
}
@@ -470,15 +513,26 @@
BUILDSTRING(b, u8)
BUILDSTRING(w, u16)
BUILDSTRING(l, u32)
+#ifdef CONFIG_64BIT
BUILDSTRING(q, u64)
+#endif
/* Depends on MIPS II instruction set */
#define mmiowb() asm volatile ("sync" ::: "memory")
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+ memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ memcpy((void __force *) dst, src, count);
+}
/*
* Memory Mapped I/O
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 3f2470e..8a342cc 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -24,11 +24,9 @@
struct pt_regs;
-#ifdef CONFIG_PREEMPT
-
extern asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs);
-#else
+#ifdef CONFIG_PREEMPT
/*
* do_IRQ handles all normal device IRQ's (the special
diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h
index 86df317..baf4129 100644
--- a/include/asm-mips/jmr3927/jmr3927.h
+++ b/include/asm-mips/jmr3927/jmr3927.h
@@ -202,20 +202,6 @@
#endif /* !__ASSEMBLY__ */
/*
- * UART defines for serial.h
- */
-
-/* use Pre-scaler T0 (1/2) */
-#define JMR3927_BASE_BAUD (JMR3927_IMCLK / 2 / 16)
-
-#define UART0_ADDR 0xfffef300
-#define UART1_ADDR 0xfffef400
-#define UART0_INT JMR3927_IRQ_IRC_SIO0
-#define UART1_INT JMR3927_IRQ_IRC_SIO1
-#define UART0_FLAGS ASYNC_BOOT_AUTOCONF
-#define UART1_FLAGS 0
-
-/*
* IRQ mappings
*/
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 148bae2..8327ec3 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -60,59 +60,36 @@
mdelay(ms);
}
-void static inline au_writeb(u8 val, int reg)
+void static inline au_writeb(u8 val, unsigned long reg)
{
*(volatile u8 *)(reg) = val;
}
-void static inline au_writew(u16 val, int reg)
+void static inline au_writew(u16 val, unsigned long reg)
{
*(volatile u16 *)(reg) = val;
}
-void static inline au_writel(u32 val, int reg)
+void static inline au_writel(u32 val, unsigned long reg)
{
*(volatile u32 *)(reg) = val;
}
-static inline u8 au_readb(unsigned long port)
+static inline u8 au_readb(unsigned long reg)
{
- return (*(volatile u8 *)port);
+ return (*(volatile u8 *)reg);
}
-static inline u16 au_readw(unsigned long port)
+static inline u16 au_readw(unsigned long reg)
{
- return (*(volatile u16 *)port);
+ return (*(volatile u16 *)reg);
}
-static inline u32 au_readl(unsigned long port)
+static inline u32 au_readl(unsigned long reg)
{
- return (*(volatile u32 *)port);
+ return (*(volatile u32 *)reg);
}
-/* These next three functions should be a generic part of the MIPS
- * kernel (with the 'au_' removed from the name) and selected for
- * processors that support the instructions.
- * Taken from PPC tree. -- Dan
- */
-/* Return the bit position of the most significant 1 bit in a word */
-static __inline__ int __ilog2(unsigned int x)
-{
- int lz;
-
- asm volatile (
- ".set\tnoreorder\n\t"
- ".set\tnoat\n\t"
- ".set\tmips32\n\t"
- "clz\t%0,%1\n\t"
- ".set\tmips0\n\t"
- ".set\tat\n\t"
- ".set\treorder"
- : "=r" (lz)
- : "r" (x));
-
- return 31 - lz;
-}
static __inline__ int au_ffz(unsigned int x)
{
@@ -162,28 +139,293 @@
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
#endif
-/* SDRAM Controller */
+/*
+ * SDRAM Register Offsets
+ */
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0 0xB4000000
-#define MEM_SDMODE1 0xB4000004
-#define MEM_SDMODE2 0xB4000008
+#define MEM_SDMODE0 (0x0000)
+#define MEM_SDMODE1 (0x0004)
+#define MEM_SDMODE2 (0x0008)
+#define MEM_SDADDR0 (0x000C)
+#define MEM_SDADDR1 (0x0010)
+#define MEM_SDADDR2 (0x0014)
+#define MEM_SDREFCFG (0x0018)
+#define MEM_SDPRECMD (0x001C)
+#define MEM_SDAUTOREF (0x0020)
+#define MEM_SDWRMD0 (0x0024)
+#define MEM_SDWRMD1 (0x0028)
+#define MEM_SDWRMD2 (0x002C)
+#define MEM_SDSLEEP (0x0030)
+#define MEM_SDSMCKE (0x0034)
-#define MEM_SDADDR0 0xB400000C
-#define MEM_SDADDR1 0xB4000010
-#define MEM_SDADDR2 0xB4000014
+/*
+ * MEM_SDMODE register content definitions
+ */
+#define MEM_SDMODE_F (1<<22)
+#define MEM_SDMODE_SR (1<<21)
+#define MEM_SDMODE_BS (1<<20)
+#define MEM_SDMODE_RS (3<<18)
+#define MEM_SDMODE_CS (7<<15)
+#define MEM_SDMODE_TRAS (15<<11)
+#define MEM_SDMODE_TMRD (3<<9)
+#define MEM_SDMODE_TWR (3<<7)
+#define MEM_SDMODE_TRP (3<<5)
+#define MEM_SDMODE_TRCD (3<<3)
+#define MEM_SDMODE_TCL (7<<0)
-#define MEM_SDREFCFG 0xB4000018
-#define MEM_SDPRECMD 0xB400001C
-#define MEM_SDAUTOREF 0xB4000020
+#define MEM_SDMODE_BS_2Bank (0<<20)
+#define MEM_SDMODE_BS_4Bank (1<<20)
+#define MEM_SDMODE_RS_11Row (0<<18)
+#define MEM_SDMODE_RS_12Row (1<<18)
+#define MEM_SDMODE_RS_13Row (2<<18)
+#define MEM_SDMODE_RS_N(N) ((N)<<18)
+#define MEM_SDMODE_CS_7Col (0<<15)
+#define MEM_SDMODE_CS_8Col (1<<15)
+#define MEM_SDMODE_CS_9Col (2<<15)
+#define MEM_SDMODE_CS_10Col (3<<15)
+#define MEM_SDMODE_CS_11Col (4<<15)
+#define MEM_SDMODE_CS_N(N) ((N)<<15)
+#define MEM_SDMODE_TRAS_N(N) ((N)<<11)
+#define MEM_SDMODE_TMRD_N(N) ((N)<<9)
+#define MEM_SDMODE_TWR_N(N) ((N)<<7)
+#define MEM_SDMODE_TRP_N(N) ((N)<<5)
+#define MEM_SDMODE_TRCD_N(N) ((N)<<3)
+#define MEM_SDMODE_TCL_N(N) ((N)<<0)
-#define MEM_SDWRMD0 0xB4000024
-#define MEM_SDWRMD1 0xB4000028
-#define MEM_SDWRMD2 0xB400002C
+/*
+ * MEM_SDADDR register contents definitions
+ */
+#define MEM_SDADDR_E (1<<20)
+#define MEM_SDADDR_CSBA (0x03FF<<10)
+#define MEM_SDADDR_CSMASK (0x03FF<<0)
+#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22)
-#define MEM_SDSLEEP 0xB4000030
-#define MEM_SDSMCKE 0xB4000034
+/*
+ * MEM_SDREFCFG register content definitions
+ */
+#define MEM_SDREFCFG_TRC (15<<28)
+#define MEM_SDREFCFG_TRPM (3<<26)
+#define MEM_SDREFCFG_E (1<<25)
+#define MEM_SDREFCFG_RE (0x1ffffff<<0)
+#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N) (N)
#endif
+/***********************************************************************/
+
+/*
+ * Au1550 SDRAM Register Offsets
+ */
+
+/***********************************************************************/
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_SDMODE0 (0x0800)
+#define MEM_SDMODE1 (0x0808)
+#define MEM_SDMODE2 (0x0810)
+#define MEM_SDADDR0 (0x0820)
+#define MEM_SDADDR1 (0x0828)
+#define MEM_SDADDR2 (0x0830)
+#define MEM_SDCONFIGA (0x0840)
+#define MEM_SDCONFIGB (0x0848)
+#define MEM_SDSTAT (0x0850)
+#define MEM_SDERRADDR (0x0858)
+#define MEM_SDSTRIDE0 (0x0860)
+#define MEM_SDSTRIDE1 (0x0868)
+#define MEM_SDSTRIDE2 (0x0870)
+#define MEM_SDWRMD0 (0x0880)
+#define MEM_SDWRMD1 (0x0888)
+#define MEM_SDWRMD2 (0x0890)
+#define MEM_SDPRECMD (0x08C0)
+#define MEM_SDAUTOREF (0x08C8)
+#define MEM_SDSREF (0x08D0)
+#define MEM_SDSLEEP MEM_SDSREF
+
+#endif
+
+/*
+ * Physical base addresses for integrated peripherals
+ */
+
+#ifdef CONFIG_SOC_AU1000
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define IRDA_PHYS_ADDR 0x10300000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MAC1_PHYS_ADDR 0x10510000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART2_PHYS_ADDR 0x11300000
+#define UART3_PHYS_ADDR 0x11400000
+#define SSI0_PHYS_ADDR 0x11600000
+#define SSI1_PHYS_ADDR 0x11680000
+#define SYS_PHYS_ADDR 0x11900000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1500
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define PCI_PHYS_ADDR 0x14005000
+#define MAC0_PHYS_ADDR 0x11500000
+#define MAC1_PHYS_ADDR 0x11510000
+#define MACEN_PHYS_ADDR 0x11520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART3_PHYS_ADDR 0x11400000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1100
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define SD0_PHYS_ADDR 0x10600000
+#define SD1_PHYS_ADDR 0x10680000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define IRDA_PHYS_ADDR 0x10300000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART3_PHYS_ADDR 0x11400000
+#define SSI0_PHYS_ADDR 0x11600000
+#define SSI1_PHYS_ADDR 0x11680000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define LCD_PHYS_ADDR 0x15000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1550
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define USBH_PHYS_ADDR 0x14020000
+#define USBD_PHYS_ADDR 0x10200000
+#define PCI_PHYS_ADDR 0x14005000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MAC1_PHYS_ADDR 0x10510000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART3_PHYS_ADDR 0x11400000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define DDMA_PHYS_ADDR 0x14002000
+#define PE_PHYS_ADDR 0x14008000
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define PSC2_PHYS_ADDR 0x10A00000
+#define PSC3_PHYS_ADDR 0x10B00000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1200
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define AES_PHYS_ADDR 0x10300000
+#define CIM_PHYS_ADDR 0x14004000
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define USBM_PHYS_ADDR 0x14020000
+#define USBH_PHYS_ADDR 0x14020100
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define DDMA_PHYS_ADDR 0x14002000
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define SD0_PHYS_ADDR 0x10600000
+#define SD1_PHYS_ADDR 0x10680000
+#define LCD_PHYS_ADDR 0x15000000
+#define SWCNT_PHYS_ADDR 0x1110010C
+#define MAEFE_PHYS_ADDR 0x14012000
+#define MAEBE_PHYS_ADDR 0x14010000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+
/* Static Bus Controller */
#define MEM_STCFG0 0xB4001000
#define MEM_STTIME0 0xB4001004
@@ -369,7 +611,7 @@
#define AU1000_MAC0_ENABLE 0xB0520000
#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1000
+#endif /* CONFIG_SOC_AU1000 */
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
@@ -429,6 +671,12 @@
#define AU1500_GPIO_207 62
#define AU1500_GPIO_208_215 63
+/* shortcuts */
+#define INTA AU1000_PCI_INTA
+#define INTB AU1000_PCI_INTB
+#define INTC AU1000_PCI_INTC
+#define INTD AU1000_PCI_INTD
+
#define UART0_ADDR 0xB1100000
#define UART3_ADDR 0xB1400000
@@ -440,7 +688,7 @@
#define AU1500_MAC0_ENABLE 0xB1520000
#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1500
+#endif /* CONFIG_SOC_AU1500 */
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
@@ -485,6 +733,22 @@
#define AU1000_GPIO_13 45
#define AU1000_GPIO_14 46
#define AU1000_GPIO_15 47
+#define AU1000_GPIO_16 48
+#define AU1000_GPIO_17 49
+#define AU1000_GPIO_18 50
+#define AU1000_GPIO_19 51
+#define AU1000_GPIO_20 52
+#define AU1000_GPIO_21 53
+#define AU1000_GPIO_22 54
+#define AU1000_GPIO_23 55
+#define AU1000_GPIO_24 56
+#define AU1000_GPIO_25 57
+#define AU1000_GPIO_26 58
+#define AU1000_GPIO_27 59
+#define AU1000_GPIO_28 60
+#define AU1000_GPIO_29 61
+#define AU1000_GPIO_30 62
+#define AU1000_GPIO_31 63
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
@@ -496,7 +760,7 @@
#define AU1100_ETH0_BASE 0xB0500000
#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
-#endif // CONFIG_SOC_AU1100
+#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
#define AU1550_UART0_INT 0
@@ -513,14 +777,14 @@
#define AU1550_PSC1_INT 11
#define AU1550_PSC2_INT 12
#define AU1550_PSC3_INT 13
-#define AU1550_TOY_INT 14
-#define AU1550_TOY_MATCH0_INT 15
-#define AU1550_TOY_MATCH1_INT 16
-#define AU1550_TOY_MATCH2_INT 17
-#define AU1550_RTC_INT 18
-#define AU1550_RTC_MATCH0_INT 19
-#define AU1550_RTC_MATCH1_INT 20
-#define AU1550_RTC_MATCH2_INT 21
+#define AU1000_TOY_INT 14
+#define AU1000_TOY_MATCH0_INT 15
+#define AU1000_TOY_MATCH1_INT 16
+#define AU1000_TOY_MATCH2_INT 17
+#define AU1000_RTC_INT 18
+#define AU1000_RTC_MATCH0_INT 19
+#define AU1000_RTC_MATCH1_INT 20
+#define AU1000_RTC_MATCH2_INT 21
#define AU1550_NAND_INT 23
#define AU1550_USB_DEV_REQ_INT 24
#define AU1550_USB_DEV_SUS_INT 25
@@ -563,6 +827,12 @@
#define AU1500_GPIO_207 62
#define AU1500_GPIO_208_218 63 // Logical or of GPIO208:218
+/* shortcuts */
+#define INTA AU1550_PCI_INTA
+#define INTB AU1550_PCI_INTB
+#define INTC AU1550_PCI_INTC
+#define INTD AU1550_PCI_INTD
+
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
#define UART3_ADDR 0xB1400000
@@ -575,7 +845,7 @@
#define AU1550_MAC0_ENABLE 0xB0520000
#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1550
+#endif /* CONFIG_SOC_AU1550 */
#ifdef CONFIG_SOC_AU1200
#define AU1200_UART0_INT 0
@@ -592,14 +862,14 @@
#define AU1200_PSC1_INT 11
#define AU1200_AES_INT 12
#define AU1200_CAMERA_INT 13
-#define AU1200_TOY_INT 14
-#define AU1200_TOY_MATCH0_INT 15
-#define AU1200_TOY_MATCH1_INT 16
-#define AU1200_TOY_MATCH2_INT 17
-#define AU1200_RTC_INT 18
-#define AU1200_RTC_MATCH0_INT 19
-#define AU1200_RTC_MATCH1_INT 20
-#define AU1200_RTC_MATCH2_INT 21
+#define AU1000_TOY_INT 14
+#define AU1000_TOY_MATCH0_INT 15
+#define AU1000_TOY_MATCH1_INT 16
+#define AU1000_TOY_MATCH2_INT 17
+#define AU1000_RTC_INT 18
+#define AU1000_RTC_MATCH0_INT 19
+#define AU1000_RTC_MATCH1_INT 20
+#define AU1000_RTC_MATCH2_INT 21
#define AU1200_NAND_INT 23
#define AU1200_GPIO_204 24
#define AU1200_GPIO_205 25
@@ -607,6 +877,7 @@
#define AU1200_GPIO_207 27
#define AU1200_GPIO_208_215 28 // Logical OR of 208:215
#define AU1200_USB_INT 29
+#define AU1000_USB_HOST_INT AU1200_USB_INT
#define AU1200_LCD_INT 30
#define AU1200_MAE_BOTH_INT 31
#define AU1000_GPIO_0 32
@@ -645,20 +916,36 @@
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
-#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB4027ffc
+#define USB_UOC_BASE 0x14020020
+#define USB_UOC_LEN 0x20
+#define USB_OHCI_BASE 0x14020100
+#define USB_OHCI_LEN 0x100
+#define USB_EHCI_BASE 0x14020200
+#define USB_EHCI_LEN 0x100
+#define USB_UDC_BASE 0x14022000
+#define USB_UDC_LEN 0x2000
+#define USB_MSR_BASE 0xB4020000
+#define USB_MSR_MCFG 4
+#define USBMSRMCFG_OMEMEN 0
+#define USBMSRMCFG_OBMEN 1
+#define USBMSRMCFG_EMEMEN 2
+#define USBMSRMCFG_EBMEN 3
+#define USBMSRMCFG_DMEMEN 4
+#define USBMSRMCFG_DBMEN 5
+#define USBMSRMCFG_GMEMEN 6
+#define USBMSRMCFG_OHCCLKEN 16
+#define USBMSRMCFG_EHCCLKEN 17
+#define USBMSRMCFG_UDCCLKEN 18
+#define USBMSRMCFG_PHYPLLEN 19
+#define USBMSRMCFG_RDCOMB 30
+#define USBMSRMCFG_PFEN 31
-// these are here for prototyping on au1550 (do not exist on au1200)
-#define AU1200_ETH0_BASE 0xB0500000
-#define AU1200_ETH1_BASE 0xB0510000
-#define AU1200_MAC0_ENABLE 0xB0520000
-#define AU1200_MAC1_ENABLE 0xB0520004
-#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1200
+#endif /* CONFIG_SOC_AU1200 */
#define AU1000_LAST_INTC0_INT 31
+#define AU1000_LAST_INTC1_INT 63
#define AU1000_MAX_INTR 63
-
+#define INTX 0xFF /* not valid */
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
@@ -730,6 +1017,8 @@
#define I2S_CONTROL_D (1<<1)
#define I2S_CONTROL_CE (1<<0)
+#ifndef CONFIG_SOC_AU1200
+
/* USB Host Controller */
#define USB_OHCI_LEN 0x00100000
@@ -775,6 +1064,8 @@
#define USBDEV_ENABLE (1<<1)
#define USBDEV_CE (1<<0)
+#endif /* !CONFIG_SOC_AU1200 */
+
/* Ethernet Controllers */
/* 4 byte offsets from AU1000_ETH_BASE */
@@ -1173,6 +1464,37 @@
#define SYS_PF_PSC1_S1 (1 << 1)
#define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+/* Au1200 Only */
+#ifdef CONFIG_SOC_AU1200
+#define SYS_PINFUNC_DMA (1<<31)
+#define SYS_PINFUNC_S0A (1<<30)
+#define SYS_PINFUNC_S1A (1<<29)
+#define SYS_PINFUNC_LP0 (1<<28)
+#define SYS_PINFUNC_LP1 (1<<27)
+#define SYS_PINFUNC_LD16 (1<<26)
+#define SYS_PINFUNC_LD8 (1<<25)
+#define SYS_PINFUNC_LD1 (1<<24)
+#define SYS_PINFUNC_LD0 (1<<23)
+#define SYS_PINFUNC_P1A (3<<21)
+#define SYS_PINFUNC_P1B (1<<20)
+#define SYS_PINFUNC_FS3 (1<<19)
+#define SYS_PINFUNC_P0A (3<<17)
+#define SYS_PINFUNC_CS (1<<16)
+#define SYS_PINFUNC_CIM (1<<15)
+#define SYS_PINFUNC_P1C (1<<14)
+#define SYS_PINFUNC_U1T (1<<12)
+#define SYS_PINFUNC_U1R (1<<11)
+#define SYS_PINFUNC_EX1 (1<<10)
+#define SYS_PINFUNC_EX0 (1<<9)
+#define SYS_PINFUNC_U0R (1<<8)
+#define SYS_PINFUNC_MC (1<<7)
+#define SYS_PINFUNC_S0B (1<<6)
+#define SYS_PINFUNC_S0C (1<<5)
+#define SYS_PINFUNC_P0B (1<<4)
+#define SYS_PINFUNC_U0T (1<<3)
+#define SYS_PINFUNC_S1B (1<<2)
+#endif
+
#define SYS_TRIOUTRD 0xB1900100
#define SYS_TRIOUTCLR 0xB1900100
#define SYS_OUTPUTRD 0xB1900108
@@ -1239,6 +1561,12 @@
#define SYS_CS_MI2_MASK (0x7<<SYS_CS_MI2_BIT)
#define SYS_CS_DI2 (1<<16)
#define SYS_CS_CI2 (1<<15)
+#ifdef CONFIG_SOC_AU1100
+ #define SYS_CS_ML_BIT 7
+ #define SYS_CS_ML_MASK (0x7<<SYS_CS_ML_BIT)
+ #define SYS_CS_DL (1<<6)
+ #define SYS_CS_CL (1<<5)
+#else
#define SYS_CS_MUH_BIT 12
#define SYS_CS_MUH_MASK (0x7<<SYS_CS_MUH_BIT)
#define SYS_CS_DUH (1<<11)
@@ -1247,6 +1575,7 @@
#define SYS_CS_MUD_MASK (0x7<<SYS_CS_MUD_BIT)
#define SYS_CS_DUD (1<<6)
#define SYS_CS_CUD (1<<5)
+#endif
#define SYS_CS_MIR_BIT 2
#define SYS_CS_MIR_MASK (0x7<<SYS_CS_MIR_BIT)
#define SYS_CS_DIR (1<<1)
@@ -1300,7 +1629,6 @@
#define SD1_XMIT_FIFO 0xB0680000
#define SD1_RECV_FIFO 0xB0680004
-
#if defined (CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr
@@ -1363,36 +1691,77 @@
_ctl_; })
-#else /* Au1000 and Au1100 */
+#else /* Au1000 and Au1100 and Au1200 */
/* don't allow any legacy ports probing */
-#define IOPORT_RESOURCE_START 0x10000000;
+#define IOPORT_RESOURCE_START 0x10000000
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xffffffff
-#ifdef CONFIG_MIPS_PB1000
-#define PCI_IO_START 0x10000000
-#define PCI_IO_END 0x1000ffff
-#define PCI_MEM_START 0x18000000
-#define PCI_MEM_END 0x18ffffff
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 1
-#else
-/* no PCI bus controller */
#define PCI_IO_START 0
#define PCI_IO_END 0
#define PCI_MEM_START 0
#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
#define PCI_LAST_DEVFN 0
-#endif
#endif
+#ifndef _LANGUAGE_ASSEMBLY
+typedef volatile struct
+{
+ /* 0x0000 */ u32 toytrim;
+ /* 0x0004 */ u32 toywrite;
+ /* 0x0008 */ u32 toymatch0;
+ /* 0x000C */ u32 toymatch1;
+ /* 0x0010 */ u32 toymatch2;
+ /* 0x0014 */ u32 cntrctrl;
+ /* 0x0018 */ u32 scratch0;
+ /* 0x001C */ u32 scratch1;
+ /* 0x0020 */ u32 freqctrl0;
+ /* 0x0024 */ u32 freqctrl1;
+ /* 0x0028 */ u32 clksrc;
+ /* 0x002C */ u32 pinfunc;
+ /* 0x0030 */ u32 reserved0;
+ /* 0x0034 */ u32 wakemsk;
+ /* 0x0038 */ u32 endian;
+ /* 0x003C */ u32 powerctrl;
+ /* 0x0040 */ u32 toyread;
+ /* 0x0044 */ u32 rtctrim;
+ /* 0x0048 */ u32 rtcwrite;
+ /* 0x004C */ u32 rtcmatch0;
+ /* 0x0050 */ u32 rtcmatch1;
+ /* 0x0054 */ u32 rtcmatch2;
+ /* 0x0058 */ u32 rtcread;
+ /* 0x005C */ u32 wakesrc;
+ /* 0x0060 */ u32 cpupll;
+ /* 0x0064 */ u32 auxpll;
+ /* 0x0068 */ u32 reserved1;
+ /* 0x006C */ u32 reserved2;
+ /* 0x0070 */ u32 reserved3;
+ /* 0x0074 */ u32 reserved4;
+ /* 0x0078 */ u32 slppwr;
+ /* 0x007C */ u32 sleep;
+ /* 0x0080 */ u32 reserved5[32];
+ /* 0x0100 */ u32 trioutrd;
+#define trioutclr trioutrd
+ /* 0x0104 */ u32 reserved6;
+ /* 0x0108 */ u32 outputrd;
+#define outputset outputrd
+ /* 0x010C */ u32 outputclr;
+ /* 0x0110 */ u32 pinstaterd;
+#define pininputen pinstaterd
+
+} AU1X00_SYS;
+
+static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE;
+
+#endif
/* Processor information base on prid.
* Copied from PowerPC.
*/
+#ifndef _LANGUAGE_ASSEMBLY
struct cpu_spec {
/* CPU is matched via (PRID & prid_mask) == prid_value */
unsigned int prid_mask;
@@ -1406,3 +1775,6 @@
extern struct cpu_spec cpu_specs[];
extern struct cpu_spec *cur_cpu_spec[];
#endif
+
+#endif
+
diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h
new file mode 100644
index 0000000..b7b46dd
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx.h
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1XXX_H_
+#define _AU1XXX_H_
+
+#include <linux/config.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+
+#elif defined(CONFIG_MIPS_PB1550)
+#include <asm/mach-pb1x00/pb1550.h>
+
+#elif defined(CONFIG_MIPS_PB1200)
+#include <asm/mach-pb1x00/pb1200.h>
+
+#elif defined(CONFIG_MIPS_DB1200)
+#include <asm/mach-db1x00/db1200.h>
+
+#endif
+
+#endif /* _AU1XXX_H_ */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index d5eb88c..b327bcd 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -45,7 +45,7 @@
#define DDMA_GLOBAL_BASE 0xb4003000
#define DDMA_CHANNEL_BASE 0xb4002000
-typedef struct dbdma_global {
+typedef volatile struct dbdma_global {
u32 ddma_config;
u32 ddma_intstat;
u32 ddma_throttle;
@@ -62,7 +62,7 @@
/* The structure of a DMA Channel.
*/
-typedef struct au1xxx_dma_channel {
+typedef volatile struct au1xxx_dma_channel {
u32 ddma_cfg; /* See below */
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
u32 ddma_statptr; /* word aligned pointer to status word */
@@ -98,7 +98,7 @@
/* "Standard" DDMA Descriptor.
* Must be 32-byte aligned.
*/
-typedef struct au1xxx_ddma_desc {
+typedef volatile struct au1xxx_ddma_desc {
u32 dscr_cmd0; /* See below */
u32 dscr_cmd1; /* See below */
u32 dscr_source0; /* source phys address */
@@ -107,6 +107,12 @@
u32 dscr_dest1; /* See below */
u32 dscr_stat; /* completion status */
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
+ /* First 32bytes are HW specific!!!
+ Lets have some SW data following.. make sure its 32bytes
+ */
+ u32 sw_status;
+ u32 sw_context;
+ u32 sw_reserved[6];
} au1x_ddma_desc_t;
#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */
@@ -125,8 +131,11 @@
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
+#define SW_STATUS_INUSE (1<<0)
+
/* Command 0 device IDs.
*/
+#ifdef CONFIG_SOC_AU1550
#define DSCR_CMD0_UART0_TX 0
#define DSCR_CMD0_UART0_RX 1
#define DSCR_CMD0_UART3_TX 2
@@ -155,9 +164,45 @@
#define DSCR_CMD0_MAC0_TX 25
#define DSCR_CMD0_MAC1_RX 26
#define DSCR_CMD0_MAC1_TX 27
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+#define DSCR_CMD0_UART0_TX 0
+#define DSCR_CMD0_UART0_RX 1
+#define DSCR_CMD0_UART1_TX 2
+#define DSCR_CMD0_UART1_RX 3
+#define DSCR_CMD0_DMA_REQ0 4
+#define DSCR_CMD0_DMA_REQ1 5
+#define DSCR_CMD0_MAE_BE 6
+#define DSCR_CMD0_MAE_FE 7
+#define DSCR_CMD0_SDMS_TX0 8
+#define DSCR_CMD0_SDMS_RX0 9
+#define DSCR_CMD0_SDMS_TX1 10
+#define DSCR_CMD0_SDMS_RX1 11
+#define DSCR_CMD0_AES_TX 13
+#define DSCR_CMD0_AES_RX 12
+#define DSCR_CMD0_PSC0_TX 14
+#define DSCR_CMD0_PSC0_RX 15
+#define DSCR_CMD0_PSC1_TX 16
+#define DSCR_CMD0_PSC1_RX 17
+#define DSCR_CMD0_CIM_RXA 18
+#define DSCR_CMD0_CIM_RXB 19
+#define DSCR_CMD0_CIM_RXC 20
+#define DSCR_CMD0_MAE_BOTH 21
+#define DSCR_CMD0_LCD 22
+#define DSCR_CMD0_NAND_FLASH 23
+#define DSCR_CMD0_PSC0_SYNC 24
+#define DSCR_CMD0_PSC1_SYNC 25
+#define DSCR_CMD0_CIM_SYNC 26
+#endif /* CONFIG_SOC_AU1200 */
+
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
+/* THis macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x,d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
+#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF)
+
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
@@ -246,6 +291,43 @@
*/
#define NUM_DBDMA_CHANS 16
+/*
+ * Ddma API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+ u32 dev_id;
+ u32 dev_flags;
+ u32 dev_tsize;
+ u32 dev_devwidth;
+ u32 dev_physaddr; /* If FIFO */
+ u32 dev_intlevel;
+ u32 dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+ spinlock_t lock;
+
+ u32 chan_flags;
+ u32 chan_index;
+ dbdev_tab_t *chan_src;
+ dbdev_tab_t *chan_dest;
+ au1x_dma_chan_t *chan_ptr;
+ au1x_ddma_desc_t *chan_desc_base;
+ au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
+ void *chan_callparam;
+ void (*chan_callback)(int, void *, struct pt_regs *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE (1 << 0)
+#define DEV_FLAGS_ANYUSE (1 << 1)
+#define DEV_FLAGS_OUT (1 << 2)
+#define DEV_FLAGS_IN (1 << 3)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_SYNC (1 << 5)
+/* end Ddma API definitions */
+
/* External functions for drivers to use.
*/
/* Use this to allocate a dbdma channel. The device ids are one of the
@@ -258,18 +340,6 @@
#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
-/* ACK! These should be in a board specific description file.
-*/
-#ifdef CONFIG_MIPS_PB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#endif
-#ifdef CONFIG_MIPS_DB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#endif
-
-
/* Set the device width of a in/out fifo.
*/
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
@@ -280,8 +350,8 @@
/* Put buffers on source/destination descriptors.
*/
-u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes);
-u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes);
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
/* Get a buffer from the destination descriptor.
*/
@@ -295,5 +365,29 @@
void au1xxx_dbdma_chan_free(u32 chanid);
void au1xxx_dbdma_dump(u32 chanid);
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
+
+u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
+void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+
+/*
+ Some compatibilty macros --
+ Needed to make changes to API without breaking existing drivers
+*/
+#define au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid,buf,nbytes,flags) au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags)
+
+
+#define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid,buf,nbytes,flags) au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags)
+
+/*
+ * Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE (1<<0)
+#define DDMA_FLAGS_NOIE (1<<1)
+
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* _AU1000_DBDMA_H_ */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_gpio.h b/include/asm-mips/mach-au1x00/au1xxx_gpio.h
new file mode 100644
index 0000000..27911e0
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx_gpio.h
@@ -0,0 +1,20 @@
+#ifndef __AU1XXX_GPIO_H
+#define __AU1XXX_GPIO_H
+
+void au1xxx_gpio1_set_inputs(void);
+void au1xxx_gpio_tristate(int signal);
+void au1xxx_gpio_write(int signal, int value);
+int au1xxx_gpio_read(int signal);
+
+typedef volatile struct
+{
+ u32 dir;
+ u32 reserved;
+ u32 output;
+ u32 pinstate;
+ u32 inten;
+ u32 enable;
+
+} AU1X00_GPIO2;
+
+#endif //__AU1XXX_GPIO_H
diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h
new file mode 100644
index 0000000..33d275c
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h
@@ -0,0 +1,301 @@
+/*
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ * Interface and Linux Device Driver" Application Note.
+ */
+#include <linux/config.h>
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ #define DMA_WAIT_TIMEOUT 100
+ #define NUM_DESCRIPTORS PRD_ENTRIES
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+ #define NUM_DESCRIPTORS 2
+#endif
+
+#ifndef AU1XXX_ATA_RQSIZE
+ #define AU1XXX_ATA_RQSIZE 128
+#endif
+
+/* Disable Burstable-Support for DBDMA */
+#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+ #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
+#endif
+
+#ifdef CONFIG_PM
+/*
+* This will enable the device to be powered up when write() or read()
+* is called. If this is not defined, the driver will return -EBUSY.
+*/
+#define WAKE_ON_ACCESS 1
+
+typedef struct
+{
+ spinlock_t lock; /* Used to block on state transitions */
+ au1xxx_power_dev_t *dev; /* Power Managers device structure */
+ unsigned stopped; /* USed to signaling device is stopped */
+} pm_state;
+#endif
+
+
+typedef struct
+{
+ u32 tx_dev_id, rx_dev_id, target_dev_id;
+ u32 tx_chan, rx_chan;
+ void *tx_desc_head, *rx_desc_head;
+ ide_hwif_t *hwif;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ ide_drive_t *drive;
+ u8 white_list, black_list;
+ struct dbdma_cmd *dma_table_cpu;
+ dma_addr_t dma_table_dma;
+ struct scatterlist *sg_table;
+ int sg_nents;
+ int sg_dma_direction;
+#endif
+ struct device *dev;
+ int irq;
+ u32 regbase;
+#ifdef CONFIG_PM
+ pm_state pm;
+#endif
+} _auide_hwif;
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+struct drive_list_entry {
+ const char * id_model;
+ const char * id_firmware;
+};
+
+/* HD white list */
+static const struct drive_list_entry dma_white_list [] = {
+/*
+ * Hitachi
+ */
+ { "HITACHI_DK14FA-20" , "ALL" },
+ { "HTS726060M9AT00" , "ALL" },
+/*
+ * Maxtor
+ */
+ { "Maxtor 6E040L0" , "ALL" },
+ { "Maxtor 6Y080P0" , "ALL" },
+ { "Maxtor 6Y160P0" , "ALL" },
+/*
+ * Seagate
+ */
+ { "ST3120026A" , "ALL" },
+ { "ST320014A" , "ALL" },
+ { "ST94011A" , "ALL" },
+ { "ST340016A" , "ALL" },
+/*
+ * Western Digital
+ */
+ { "WDC WD400UE-00HCT0" , "ALL" },
+ { "WDC WD400JB-00JJC0" , "ALL" },
+ { NULL , NULL }
+};
+
+/* HD black list */
+static const struct drive_list_entry dma_black_list [] = {
+/*
+ * Western Digital
+ */
+ { "WDC WD100EB-00CGH0" , "ALL" },
+ { "WDC WD200BB-00AUA1" , "ALL" },
+ { "WDC AC24300L" , "ALL" },
+ { NULL , NULL }
+};
+#endif
+
+/* function prototyping */
+u8 auide_inb(unsigned long port);
+u16 auide_inw(unsigned long port);
+u32 auide_inl(unsigned long port);
+void auide_insw(unsigned long port, void *addr, u32 count);
+void auide_insl(unsigned long port, void *addr, u32 count);
+void auide_outb(u8 addr, unsigned long port);
+void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port);
+void auide_outw(u16 addr, unsigned long port);
+void auide_outl(u32 addr, unsigned long port);
+void auide_outsw(unsigned long port, void *addr, u32 count);
+void auide_outsl(unsigned long port, void *addr, u32 count);
+static void auide_tune_drive(ide_drive_t *drive, byte pio);
+static int auide_tune_chipset (ide_drive_t *drive, u8 speed);
+static int auide_ddma_init( _auide_hwif *auide );
+static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif);
+int __init auide_probe(void);
+
+#ifdef CONFIG_PM
+ int au1200ide_pm_callback( au1xxx_power_dev_t *dev,
+ au1xxx_request_t request, void *data);
+ static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_access( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev );
+ static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev );
+#endif
+
+
+/*
+ * Multi-Word DMA + DbDMA functions
+ */
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+
+ static int in_drive_list(struct hd_driveid *id,
+ const struct drive_list_entry *drive_table);
+ static int auide_build_sglist(ide_drive_t *drive, struct request *rq);
+ static int auide_build_dmatable(ide_drive_t *drive);
+ static int auide_dma_end(ide_drive_t *drive);
+ static void auide_dma_start(ide_drive_t *drive );
+ ide_startstop_t auide_dma_intr (ide_drive_t *drive);
+ static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command);
+ static int auide_dma_setup(ide_drive_t *drive);
+ static int auide_dma_check(ide_drive_t *drive);
+ static int auide_dma_test_irq(ide_drive_t *drive);
+ static int auide_dma_host_off(ide_drive_t *drive);
+ static int auide_dma_host_on(ide_drive_t *drive);
+ static int auide_dma_lostirq(ide_drive_t *drive);
+ static int auide_dma_on(ide_drive_t *drive);
+ static void auide_ddma_tx_callback(int irq, void *param,
+ struct pt_regs *regs);
+ static void auide_ddma_rx_callback(int irq, void *param,
+ struct pt_regs *regs);
+ static int auide_dma_off_quietly(ide_drive_t *drive);
+ static int auide_dma_timeout(ide_drive_t *drive);
+
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+
+/*******************************************************************************
+* PIO Mode timing calculation : *
+* *
+* Static Bus Spec ATA Spec *
+* Tcsoe = t1 *
+* Toecs = t9 *
+* Twcs = t9 *
+* Tcsh = t2i | t2 *
+* Tcsoff = t2i | t2 *
+* Twp = t2 *
+* Tcsw = t1 *
+* Tpm = 0 *
+* Ta = t1+t2 *
+*******************************************************************************/
+
+#define TCSOE_MASK (0x07<<29)
+#define TOECS_MASK (0x07<<26)
+#define TWCS_MASK (0x07<<28)
+#define TCSH_MASK (0x0F<<24)
+#define TCSOFF_MASK (0x07<<20)
+#define TWP_MASK (0x3F<<14)
+#define TCSW_MASK (0x0F<<10)
+#define TPM_MASK (0x0F<<6)
+#define TA_MASK (0x3F<<0)
+#define TS_MASK (1<<8)
+
+/* Timing parameters PIO mode 0 */
+#define SBC_IDE_PIO0_TCSOE (0x04<<29)
+#define SBC_IDE_PIO0_TOECS (0x01<<26)
+#define SBC_IDE_PIO0_TWCS (0x02<<28)
+#define SBC_IDE_PIO0_TCSH (0x08<<24)
+#define SBC_IDE_PIO0_TCSOFF (0x07<<20)
+#define SBC_IDE_PIO0_TWP (0x10<<14)
+#define SBC_IDE_PIO0_TCSW (0x04<<10)
+#define SBC_IDE_PIO0_TPM (0x0<<6)
+#define SBC_IDE_PIO0_TA (0x15<<0)
+/* Timing parameters PIO mode 1 */
+#define SBC_IDE_PIO1_TCSOE (0x03<<29)
+#define SBC_IDE_PIO1_TOECS (0x01<<26)
+#define SBC_IDE_PIO1_TWCS (0x01<<28)
+#define SBC_IDE_PIO1_TCSH (0x06<<24)
+#define SBC_IDE_PIO1_TCSOFF (0x06<<20)
+#define SBC_IDE_PIO1_TWP (0x08<<14)
+#define SBC_IDE_PIO1_TCSW (0x03<<10)
+#define SBC_IDE_PIO1_TPM (0x00<<6)
+#define SBC_IDE_PIO1_TA (0x0B<<0)
+/* Timing parameters PIO mode 2 */
+#define SBC_IDE_PIO2_TCSOE (0x05<<29)
+#define SBC_IDE_PIO2_TOECS (0x01<<26)
+#define SBC_IDE_PIO2_TWCS (0x01<<28)
+#define SBC_IDE_PIO2_TCSH (0x07<<24)
+#define SBC_IDE_PIO2_TCSOFF (0x07<<20)
+#define SBC_IDE_PIO2_TWP (0x1F<<14)
+#define SBC_IDE_PIO2_TCSW (0x05<<10)
+#define SBC_IDE_PIO2_TPM (0x00<<6)
+#define SBC_IDE_PIO2_TA (0x22<<0)
+/* Timing parameters PIO mode 3 */
+#define SBC_IDE_PIO3_TCSOE (0x05<<29)
+#define SBC_IDE_PIO3_TOECS (0x01<<26)
+#define SBC_IDE_PIO3_TWCS (0x01<<28)
+#define SBC_IDE_PIO3_TCSH (0x0D<<24)
+#define SBC_IDE_PIO3_TCSOFF (0x0D<<20)
+#define SBC_IDE_PIO3_TWP (0x15<<14)
+#define SBC_IDE_PIO3_TCSW (0x05<<10)
+#define SBC_IDE_PIO3_TPM (0x00<<6)
+#define SBC_IDE_PIO3_TA (0x1A<<0)
+/* Timing parameters PIO mode 4 */
+#define SBC_IDE_PIO4_TCSOE (0x04<<29)
+#define SBC_IDE_PIO4_TOECS (0x01<<26)
+#define SBC_IDE_PIO4_TWCS (0x01<<28)
+#define SBC_IDE_PIO4_TCSH (0x04<<24)
+#define SBC_IDE_PIO4_TCSOFF (0x04<<20)
+#define SBC_IDE_PIO4_TWP (0x0D<<14)
+#define SBC_IDE_PIO4_TCSW (0x03<<10)
+#define SBC_IDE_PIO4_TPM (0x00<<6)
+#define SBC_IDE_PIO4_TA (0x12<<0)
+/* Timing parameters MDMA mode 0 */
+#define SBC_IDE_MDMA0_TCSOE (0x03<<29)
+#define SBC_IDE_MDMA0_TOECS (0x01<<26)
+#define SBC_IDE_MDMA0_TWCS (0x01<<28)
+#define SBC_IDE_MDMA0_TCSH (0x07<<24)
+#define SBC_IDE_MDMA0_TCSOFF (0x07<<20)
+#define SBC_IDE_MDMA0_TWP (0x0C<<14)
+#define SBC_IDE_MDMA0_TCSW (0x03<<10)
+#define SBC_IDE_MDMA0_TPM (0x00<<6)
+#define SBC_IDE_MDMA0_TA (0x0F<<0)
+/* Timing parameters MDMA mode 1 */
+#define SBC_IDE_MDMA1_TCSOE (0x05<<29)
+#define SBC_IDE_MDMA1_TOECS (0x01<<26)
+#define SBC_IDE_MDMA1_TWCS (0x01<<28)
+#define SBC_IDE_MDMA1_TCSH (0x05<<24)
+#define SBC_IDE_MDMA1_TCSOFF (0x05<<20)
+#define SBC_IDE_MDMA1_TWP (0x0F<<14)
+#define SBC_IDE_MDMA1_TCSW (0x05<<10)
+#define SBC_IDE_MDMA1_TPM (0x00<<6)
+#define SBC_IDE_MDMA1_TA (0x15<<0)
+/* Timing parameters MDMA mode 2 */
+#define SBC_IDE_MDMA2_TCSOE (0x04<<29)
+#define SBC_IDE_MDMA2_TOECS (0x01<<26)
+#define SBC_IDE_MDMA2_TWCS (0x01<<28)
+#define SBC_IDE_MDMA2_TCSH (0x04<<24)
+#define SBC_IDE_MDMA2_TCSOFF (0x04<<20)
+#define SBC_IDE_MDMA2_TWP (0x0D<<14)
+#define SBC_IDE_MDMA2_TCSW (0x04<<10)
+#define SBC_IDE_MDMA2_TPM (0x00<<6)
+#define SBC_IDE_MDMA2_TA (0x12<<0)
+
diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h
index 283519d..8e5fb3c 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_psc.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h
@@ -33,6 +33,8 @@
#ifndef _AU1000_PSC_H_
#define _AU1000_PSC_H_
+#include <linux/config.h>
+
/* The PSC base addresses. */
#ifdef CONFIG_SOC_AU1550
#define PSC0_BASE_ADDR 0xb1a00000
diff --git a/include/asm-mips/mach-au1x00/ioremap.h b/include/asm-mips/mach-au1x00/ioremap.h
new file mode 100644
index 0000000..d3ec627
--- /dev/null
+++ b/include/asm-mips/mach-au1x00/ioremap.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-mips/mach-au1x00/ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_AU1X00_IOREMAP_H
+#define __ASM_MACH_AU1X00_IOREMAP_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern phys_t __fixup_bigphys_addr(phys_t, phys_t);
+#else
+static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+#endif
+
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return __fixup_bigphys_addr(phys_addr, size);
+}
+
+#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
new file mode 100644
index 0000000..5d89437
--- /dev/null
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -0,0 +1,224 @@
+/*
+ * AMD Alchemy DB1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1200_H
+#define __ASM_DB1200_H
+
+#include <linux/types.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/* SPI and SMB are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xB9800000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 board;
+ u16 reserved5;
+ /*18*/ u16 disk_leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+ /*20*/ u16 intclr;
+ u16 reserved8;
+ /*24*/ u16 intset;
+ u16 reserved9;
+ /*28*/ u16 intclr_mask;
+ u16 reserved10;
+ /*2C*/ u16 intset_mask;
+ u16 reserved11;
+
+ /*30*/ u16 sig_status;
+ u16 reserved12;
+ /*34*/ u16 int_status;
+ u16 reserved13;
+ /*38*/ u16 reserved14;
+ u16 reserved15;
+ /*3C*/ u16 reserved16;
+ u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_IDECBLID 0x0200
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+#define BCSR_RESETS_TV 0x0010
+/* not resets but in the same register */
+#define BCSR_RESETS_PWMR1mUX 0x0800
+#define BCSR_RESETS_PCS0MUX 0x1000
+#define BCSR_RESETS_PCS1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+
+#define BCSR_LEDS_DECIMALS 0x0003
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE 0x0001
+#define BCSR_INT_ETH 0x0002
+#define BCSR_INT_PC0 0x0004
+#define BCSR_INT_PC0STSCHG 0x0008
+#define BCSR_INT_PC1 0x0010
+#define BCSR_INT_PC1STSCHG 0x0020
+#define BCSR_INT_DC 0x0040
+#define BCSR_INT_FLASHBUSY 0x0080
+#define BCSR_INT_PC0INSERT 0x0100
+#define BCSR_INT_PC0EJECT 0x0200
+#define BCSR_INT_PC1INSERT 0x0400
+#define BCSR_INT_PC1EJECT 0x0800
+#define BCSR_INT_SD0INSERT 0x1000
+#define BCSR_INT_SD0EJECT 0x2000
+
+#define AU1XXX_SMC91111_PHYS_ADDR (0x19000300)
+#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT
+
+#define AU1XXX_ATA_PHYS_ADDR (0x18800000)
+#define AU1XXX_ATA_PHYS_LEN (0x100)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_INT DB1200_IDE_INT
+#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
+#define AU1XXX_ATA_RQSIZE 128
+
+#define NAND_PHYS_ADDR 0x20000000
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the DB1200_INT_BEGIN value.
+ * *example: IDE bis pos is = 64 - 64
+ ETH bit pos is = 65 - 64
+ */
+#define DB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
+#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0)
+#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1)
+#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2)
+#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3)
+#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4)
+#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5)
+#define DB1200_DC_INT (DB1200_INT_BEGIN + 6)
+#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7)
+#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8)
+#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9)
+#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10)
+#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11)
+#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12)
+#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13)
+
+#define DB1200_INT_END (DB1200_INT_BEGIN + 15)
+
+/* For drivers/pcmcia/au1000_db1x00.c */
+
+/* PCMCIA Db1x00 specific defines */
+
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+
+#endif /* __ASM_DB1200_H */
+
diff --git a/include/asm-mips/mach-dec/mc146818rtc.h b/include/asm-mips/mach-dec/mc146818rtc.h
index a326f45..6d37a56 100644
--- a/include/asm-mips/mach-dec/mc146818rtc.h
+++ b/include/asm-mips/mach-dec/mc146818rtc.h
@@ -3,7 +3,7 @@
*
* Copyright (C) 1998, 2001 by Ralf Baechle
* Copyright (C) 1998 by Harald Koerfgen
- * Copyright (C) 2002 Maciej W. Rozycki
+ * Copyright (C) 2002, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -14,23 +14,18 @@
#define __ASM_MIPS_DEC_RTC_DEC_H
#include <linux/types.h>
-
#include <asm/addrspace.h>
+#include <asm/dec/system.h>
extern volatile u8 *dec_rtc_base;
-extern unsigned long dec_kn_slot_size;
-#define RTC_PORT(x) CPHYSADDR(dec_rtc_base)
+#define RTC_PORT(x) CPHYSADDR((long)dec_rtc_base)
#define RTC_IO_EXTENT dec_kn_slot_size
#define RTC_IOMAPPED 0
#undef RTC_IRQ
#define RTC_DEC_YEAR 0x3f /* Where we store the real year on DECs. */
-#include <linux/mc146818rtc.h>
-#include <linux/module.h>
-#include <linux/types.h>
-
static inline unsigned char CMOS_READ(unsigned long addr)
{
return dec_rtc_base[addr * 4];
diff --git a/include/asm-mips/mach-generic/cpu-feature-overrides.h b/include/asm-mips/mach-generic/cpu-feature-overrides.h
index 0aecfd0..7c185bb 100644
--- a/include/asm-mips/mach-generic/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-generic/cpu-feature-overrides.h
@@ -8,6 +8,6 @@
#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
-/* Intensionally empty file ... */
+/* Intentionally empty file ... */
#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index cb2edd0..9610069 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -18,6 +18,7 @@
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/stddef.h>
+#include <asm/processor.h>
#ifndef MAX_HWIFS
# ifdef CONFIG_BLK_DEV_IDEPCI
@@ -104,15 +105,71 @@
/* MIPS port and memory-mapped I/O string operations. */
-#define __ide_insw insw
-#define __ide_insl insl
-#define __ide_outsw outsw
-#define __ide_outsl outsl
+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
+{
+ if (cpu_has_dc_aliases) {
+ unsigned long end = addr + size;
+ for (; addr < end; addr += PAGE_SIZE)
+ flush_dcache_page(virt_to_page(addr));
+ }
+}
-#define __ide_mm_insw readsw
-#define __ide_mm_insl readsl
-#define __ide_mm_outsw writesw
-#define __ide_mm_outsl writesl
+static inline void __ide_insw(unsigned long port, void *addr,
+ unsigned int count)
+{
+ insw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
+{
+ insl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_outsw(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ outsw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_outsl(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ outsl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+ readsw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+ readsl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+ writesw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
+{
+ writesl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+/* ide_insw calls insw, not __ide_insw. Why? */
+#undef insw
+#undef insl
+#define insw(port, addr, count) __ide_insw(port, addr, count)
+#define insl(port, addr, count) __ide_insl(port, addr, count)
#endif /* __KERNEL__ */
diff --git a/include/asm-mips/mach-generic/ioremap.h b/include/asm-mips/mach-generic/ioremap.h
new file mode 100644
index 0000000..9b64ff6
--- /dev/null
+++ b/include/asm-mips/mach-generic/ioremap.h
@@ -0,0 +1,23 @@
+/*
+ * include/asm-mips/mach-generic/ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_GENERIC_IOREMAP_H
+#define __ASM_MACH_GENERIC_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+
+#endif /* __ASM_MACH_GENERIC_IOREMAP_H */
diff --git a/include/asm-mips/mach-generic/kernel-entry-init.h b/include/asm-mips/mach-generic/kernel-entry-init.h
new file mode 100644
index 0000000..7e66505
--- /dev/null
+++ b/include/asm-mips/mach-generic/kernel-entry-init.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+
+/* Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+.macro kernel_entry_setup
+.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+ .macro smp_slave_setup
+ .endm
+
+
+#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */
diff --git a/include/asm-mips/mach-generic/kmalloc.h b/include/asm-mips/mach-generic/kmalloc.h
new file mode 100644
index 0000000..373d66d
--- /dev/null
+++ b/include/asm-mips/mach-generic/kmalloc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_GENERIC_KMALLOC_H
+#define __ASM_MACH_GENERIC_KMALLOC_H
+
+#include <linux/config.h>
+
+#ifndef CONFIG_DMA_COHERENT
+/*
+ * Total overkill for most systems but need as a safe default.
+ */
+#define ARCH_KMALLOC_MINALIGN 128
+#endif
+
+#endif /* __ASM_MACH_GENERIC_KMALLOC_H */
diff --git a/include/asm-mips/mach-generic/spaces.h b/include/asm-mips/mach-generic/spaces.h
index 5a2c1ef..b849d8d 100644
--- a/include/asm-mips/mach-generic/spaces.h
+++ b/include/asm-mips/mach-generic/spaces.h
@@ -55,13 +55,13 @@
#endif
#ifdef CONFIG_DMA_NONCOHERENT
-#define CAC_BASE 0x9800000000000000
+#define CAC_BASE 0x9800000000000000UL
#else
-#define CAC_BASE 0xa800000000000000
+#define CAC_BASE 0xa800000000000000UL
#endif
-#define IO_BASE 0x9000000000000000
-#define UNCAC_BASE 0x9000000000000000
-#define MAP_BASE 0xc000000000000000
+#define IO_BASE 0x9000000000000000UL
+#define UNCAC_BASE 0x9000000000000000UL
+#define MAP_BASE 0xc000000000000000UL
#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/include/asm-mips/mach-ip22/cpu-feature-overrides.h b/include/asm-mips/mach-ip22/cpu-feature-overrides.h
index 3c8896d..ab97146 100644
--- a/include/asm-mips/mach-ip22/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip22/cpu-feature-overrides.h
@@ -11,6 +11,12 @@
/*
* IP22 with a variety of processors so we can't use defaults for everything.
*/
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4kcache 1
+#define cpu_has_fpu 1
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
#define cpu_has_mips16 0
#define cpu_has_divec 0
#define cpu_has_cache_cdex_p 1
@@ -23,6 +29,8 @@
#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
diff --git a/include/asm-mips/mach-ip22/spaces.h b/include/asm-mips/mach-ip22/spaces.h
index e96166f..8385f71 100644
--- a/include/asm-mips/mach-ip22/spaces.h
+++ b/include/asm-mips/mach-ip22/spaces.h
@@ -44,7 +44,7 @@
#define CAC_BASE 0xffffffff80000000
#define IO_BASE 0xffffffffa0000000
#define UNCAC_BASE 0xffffffffa0000000
-#define MAP_BASE 0xffffffffc0000000
+#define MAP_BASE 0xc000000000000000
#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/include/asm-mips/mach-ip27/cpu-feature-overrides.h b/include/asm-mips/mach-ip27/cpu-feature-overrides.h
index fe96d73..4c8a900 100644
--- a/include/asm-mips/mach-ip27/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip27/cpu-feature-overrides.h
@@ -25,6 +25,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 1
#define cpu_has_nofpuex 0
diff --git a/include/asm-mips/mach-ip27/kernel-entry-init.h b/include/asm-mips/mach-ip27/kernel-entry-init.h
new file mode 100644
index 0000000..c1a1031
--- /dev/null
+++ b/include/asm-mips/mach-ip27/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2005 Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_IP27_KERNEL_ENTRY_H
+#define __ASM_MACH_IP27_KERNEL_ENTRY_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/klkernvars.h>
+
+/*
+ * Returns the local nasid into res.
+ */
+ .macro GET_NASID_ASM res
+ dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
+ ld \res, (\res)
+ and \res, NSRI_NODEID_MASK
+ dsrl \res, NSRI_NODEID_SHFT
+ .endm
+
+/*
+ * Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+ .macro kernel_entry_setup
+ GET_NASID_ASM t1
+ move t2, t1 # text and data are here
+ MAPPED_KERNEL_SETUP_TLB
+ .endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+ .macro smp_slave_setup
+ GET_NASID_ASM t1
+ dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
+ KLDIR_OFF_POINTER + CAC_BASE
+ dsll t1, NASID_SHFT
+ or t0, t0, t1
+ ld t0, 0(t0) # t0 points to kern_vars struct
+ lh t1, KV_RO_NASID_OFFSET(t0)
+ lh t2, KV_RW_NASID_OFFSET(t0)
+ MAPPED_KERNEL_SETUP_TLB
+ ARC64_TWIDDLE_PC
+ .endm
+
+#endif /* __ASM_MACH_IP27_KERNEL_ENTRY_H */
diff --git a/include/asm-mips/mach-ip27/kmalloc.h b/include/asm-mips/mach-ip27/kmalloc.h
new file mode 100644
index 0000000..426bd04
--- /dev/null
+++ b/include/asm-mips/mach-ip27/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_IP27_KMALLOC_H
+#define __ASM_MACH_IP27_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_IP27_KMALLOC_H */
diff --git a/include/asm-mips/mach-ip27/mmzone.h b/include/asm-mips/mach-ip27/mmzone.h
index d3f5663..986a3b9 100644
--- a/include/asm-mips/mach-ip27/mmzone.h
+++ b/include/asm-mips/mach-ip27/mmzone.h
@@ -10,7 +10,6 @@
#define LEVELS_PER_SLICE 128
struct slice_data {
- unsigned long irq_alloc_mask[2];
unsigned long irq_enable_mask[2];
int level_to_irq[LEVELS_PER_SLICE];
};
@@ -20,6 +19,7 @@
DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW);
cpumask_t h_cpus;
unsigned long slice_map;
+ unsigned long irq_alloc_mask[2];
struct slice_data slice[2];
};
diff --git a/include/asm-mips/mach-ip27/spaces.h b/include/asm-mips/mach-ip27/spaces.h
index e3b3fe3..45e6178 100644
--- a/include/asm-mips/mach-ip27/spaces.h
+++ b/include/asm-mips/mach-ip27/spaces.h
@@ -20,6 +20,7 @@
#define IO_BASE 0x9200000000000000
#define MSPEC_BASE 0x9400000000000000
#define UNCAC_BASE 0x9600000000000000
+#define MAP_BASE 0xc000000000000000
#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h
index a70a812..82141c7 100644
--- a/include/asm-mips/mach-ip27/topology.h
+++ b/include/asm-mips/mach-ip27/topology.h
@@ -9,6 +9,9 @@
#define parent_node(node) (node)
#define node_to_cpumask(node) (hub_data(node)->h_cpus)
#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
#define pcibus_to_cpumask(bus) (cpu_online_map)
extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
diff --git a/include/asm-mips/mach-ip32/cpu-feature-overrides.h b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
index 0471397..ab37fc1 100644
--- a/include/asm-mips/mach-ip32/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ip32/cpu-feature-overrides.h
@@ -37,5 +37,6 @@
#define cpu_has_ejtag 0
#define cpu_has_vtag_icache 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ip32/kmalloc.h b/include/asm-mips/mach-ip32/kmalloc.h
new file mode 100644
index 0000000..9d2d4d9
--- /dev/null
+++ b/include/asm-mips/mach-ip32/kmalloc.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_MACH_IP32_KMALLOC_H
+#define __ASM_MACH_IP32_KMALLOC_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_CPU_R5000) || defined (CONFIG_CPU_RM7000)
+#define ARCH_KMALLOC_MINALIGN 32
+#else
+#define ARCH_KMALLOC_MINALIGN 128
+#endif
+
+#endif /* __ASM_MACH_IP32_KMALLOC_H */
diff --git a/include/asm-mips/mach-ip32/spaces.h b/include/asm-mips/mach-ip32/spaces.h
index c7839f8..44abe5c 100644
--- a/include/asm-mips/mach-ip32/spaces.h
+++ b/include/asm-mips/mach-ip32/spaces.h
@@ -19,10 +19,10 @@
#define HIGHMEM_START (1UL << 59UL)
#endif
-#define CAC_BASE 0x9800000000000000
-#define IO_BASE 0x9000000000000000
-#define UNCAC_BASE 0x9000000000000000
-#define MAP_BASE 0xc000000000000000
+#define CAC_BASE 0x9800000000000000UL
+#define IO_BASE 0x9000000000000000UL
+#define UNCAC_BASE 0x9000000000000000UL
+#define MAP_BASE 0xc000000000000000UL
#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/include/asm-mips/mach-ja/cpu-feature-overrides.h b/include/asm-mips/mach-ja/cpu-feature-overrides.h
index ca57e7d..a0fde40 100644
--- a/include/asm-mips/mach-ja/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ja/cpu-feature-overrides.h
@@ -25,6 +25,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
@@ -36,10 +37,4 @@
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 32
-/*
- * On the RM9000 we need to ensure that I-cache lines being fetches only
- * contain valid instructions are funny things will happen.
- */
-#define PLAT_TRAMPOLINE_STUFF_LINE 32UL
-
#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-mips/cpu-feature-overrides.h b/include/asm-mips/mach-mips/cpu-feature-overrides.h
index 6f51be5..9f92aed 100644
--- a/include/asm-mips/mach-mips/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-mips/cpu-feature-overrides.h
@@ -17,7 +17,7 @@
#ifdef CONFIG_CPU_MIPS32
#define cpu_has_tlb 1
#define cpu_has_4kex 1
-#define cpu_has_4ktlb 1
+#define cpu_has_4kcache 1
/* #define cpu_has_fpu ? */
/* #define cpu_has_32fpr ? */
#define cpu_has_counter 1
@@ -37,12 +37,13 @@
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
/* #define cpu_has_subset_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
#endif
#ifdef CONFIG_CPU_MIPS64
#define cpu_has_tlb 1
#define cpu_has_4kex 1
-#define cpu_has_4ktlb 1
+#define cpu_has_4kcache 1
/* #define cpu_has_fpu ? */
/* #define cpu_has_32fpr ? */
#define cpu_has_counter 1
@@ -62,6 +63,7 @@
/* #define cpu_has_64bits ? */
/* #define cpu_has_64bit_zero_reg ? */
/* #define cpu_has_subset_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
#endif
#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-mips/irq.h b/include/asm-mips/mach-mips/irq.h
new file mode 100644
index 0000000..f857969
--- /dev/null
+++ b/include/asm-mips/mach-mips/irq.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_MACH_MIPS_IRQ_H
+#define __ASM_MACH_MIPS_IRQ_H
+
+#include <linux/config.h>
+
+#define NR_IRQS 256
+
+#ifdef CONFIG_SMP
+
+#define ARCH_HAS_IRQ_PER_CPU
+
+#endif
+
+#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
index 7473512..825c5f6 100644
--- a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
@@ -28,6 +28,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
@@ -39,10 +40,4 @@
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 32
-/*
- * On the RM9000 we need to ensure that I-cache lines being fetches only
- * contain valid instructions are funny things will happen.
- */
-#define PLAT_TRAMPOLINE_STUFF_LINE 32UL
-
#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
new file mode 100644
index 0000000..9a3088b
--- /dev/null
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -0,0 +1,252 @@
+/*
+ * AMD Alchemy PB1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1200_H
+#define __ASM_PB1200_H
+
+#include <linux/types.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/* SPI and SMB are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAD800000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 board;
+ u16 reserved5;
+ /*18*/ u16 disk_leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+ /*20*/ u16 intclr;
+ u16 reserved8;
+ /*24*/ u16 intset;
+ u16 reserved9;
+ /*28*/ u16 intclr_mask;
+ u16 reserved10;
+ /*2C*/ u16 intset_mask;
+ u16 reserved11;
+
+ /*30*/ u16 sig_status;
+ u16 reserved12;
+ /*34*/ u16 int_status;
+ u16 reserved13;
+ /*38*/ u16 reserved14;
+ u16 reserved15;
+ /*3C*/ u16 reserved16;
+ u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_IDECBLID 0x0200
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+/* not resets but in the same register */
+#define BCSR_RESETS_WSCFSM 0x0800
+#define BCSR_RESETS_PCS0MUX 0x1000
+#define BCSR_RESETS_PCS1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+#define BCSR_RESETS_SD1MUX 0x8000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+#define BCSR_BOARD_SD1PWR 0x0080
+
+#define BCSR_LEDS_DECIMALS 0x00FF
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_VDDI 0x001F
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE 0x0001
+#define BCSR_INT_ETH 0x0002
+#define BCSR_INT_PC0 0x0004
+#define BCSR_INT_PC0STSCHG 0x0008
+#define BCSR_INT_PC1 0x0010
+#define BCSR_INT_PC1STSCHG 0x0020
+#define BCSR_INT_DC 0x0040
+#define BCSR_INT_FLASHBUSY 0x0080
+#define BCSR_INT_PC0INSERT 0x0100
+#define BCSR_INT_PC0EJECT 0x0200
+#define BCSR_INT_PC1INSERT 0x0400
+#define BCSR_INT_PC1EJECT 0x0800
+#define BCSR_INT_SD0INSERT 0x1000
+#define BCSR_INT_SD0EJECT 0x2000
+#define BCSR_INT_SD1INSERT 0x4000
+#define BCSR_INT_SD1EJECT 0x8000
+
+/* PCMCIA Db1x00 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+#define AU1XXX_SMC91111_PHYS_ADDR (0x0D000300)
+#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT
+
+#define AU1XXX_ATA_PHYS_ADDR (0x0C800000)
+#define AU1XXX_ATA_PHYS_LEN (0x100)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_INT PB1200_IDE_INT
+#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
+#define AU1XXX_ATA_RQSIZE 128
+
+#define NAND_PHYS_ADDR 0x1C000000
+
+/* Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1200 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT 0
+#define NAND_T_PUL_SHIFT 4
+#define NAND_T_SU_SHIFT 8
+#define NAND_T_WH_SHIFT 12
+
+#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the PB1200_INT_BEGIN value.
+ * *example: IDE bis pos is = 64 - 64
+ ETH bit pos is = 65 - 64
+ */
+#define PB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
+#define PB1200_IDE_INT (PB1200_INT_BEGIN + 0)
+#define PB1200_ETH_INT (PB1200_INT_BEGIN + 1)
+#define PB1200_PC0_INT (PB1200_INT_BEGIN + 2)
+#define PB1200_PC0_STSCHG_INT (PB1200_INT_BEGIN + 3)
+#define PB1200_PC1_INT (PB1200_INT_BEGIN + 4)
+#define PB1200_PC1_STSCHG_INT (PB1200_INT_BEGIN + 5)
+#define PB1200_DC_INT (PB1200_INT_BEGIN + 6)
+#define PB1200_FLASHBUSY_INT (PB1200_INT_BEGIN + 7)
+#define PB1200_PC0_INSERT_INT (PB1200_INT_BEGIN + 8)
+#define PB1200_PC0_EJECT_INT (PB1200_INT_BEGIN + 9)
+#define PB1200_PC1_INSERT_INT (PB1200_INT_BEGIN + 10)
+#define PB1200_PC1_EJECT_INT (PB1200_INT_BEGIN + 11)
+#define PB1200_SD0_INSERT_INT (PB1200_INT_BEGIN + 12)
+#define PB1200_SD0_EJECT_INT (PB1200_INT_BEGIN + 13)
+#define PB1200_SD1_INSERT_INT (PB1200_INT_BEGIN + 14)
+#define PB1200_SD1_EJECT_INT (PB1200_INT_BEGIN + 15)
+
+#define PB1200_INT_END (PB1200_INT_BEGIN + 15)
+
+/* For drivers/pcmcia/au1000_db1x00.c */
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+
+#endif /* __ASM_PB1200_H */
+
diff --git a/include/asm-mips/mach-pnx8550/cm.h b/include/asm-mips/mach-pnx8550/cm.h
new file mode 100644
index 0000000..bb0a56c
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/cm.h
@@ -0,0 +1,43 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Clock module specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_CM_H
+#define __PNX8550_CM_H
+
+#define PNX8550_CM_BASE 0xBBE47000
+
+#define PNX8550_CM_PLL0_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000)
+#define PNX8550_CM_PLL1_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004)
+#define PNX8550_CM_PLL2_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008)
+#define PNX8550_CM_PLL3_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C)
+
+// Table not complete.....
+
+#define PNX8550_CM_PLL_BLOCKED_MASK 0x80000000
+#define PNX8550_CM_PLL_LOCK_MASK 0x40000000
+#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000
+#define PNX8550_CM_PLL_N_MASK 0x01ff0000
+#define PNX8550_CM_PLL_M_MASK 0x00003f00
+#define PNX8550_CM_PLL_P_MASK 0x0000000c
+#define PNX8550_CM_PLL_PD_MASK 0x00000002
+
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/glb.h b/include/asm-mips/mach-pnx8550/glb.h
new file mode 100644
index 0000000..07aa85e
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/glb.h
@@ -0,0 +1,86 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PNX8550 global definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_GLB_H
+#define __PNX8550_GLB_H
+
+#define PNX8550_GLB1_BASE 0xBBE63000
+#define PNX8550_GLB2_BASE 0xBBE4d000
+#define PNX8550_RESET_BASE 0xBBE60000
+
+/* PCI Inta Output Enable Registers */
+#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050)
+
+/* Bit 1:Enable DAC Powerdown
+ 0:DACs are enabled and are working normally
+ 1:DACs are powerdown
+*/
+#define PNX8550_GLB_DAC_PD 0x2
+/* Bit 0:Enable of PCI inta output
+ 0 = Disable PCI inta output
+ 1 = Enable PCI inta output
+*/
+#define PNX8550_GLB_ENABLE_INTA_O 0x1
+
+/* PCI Direct Mappings */
+#define PNX8550_PCIMEM 0x12000000
+#define PNX8550_PCIMEM_SIZE 0x08000000
+#define PNX8550_PCIIO 0x1c000000
+#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */
+
+#define PNX8550_PORT_BASE KSEG1
+
+// GPIO def
+#define PNX8550_GPIO_BASE 0x1Be00000
+
+#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500)
+#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004)
+#define PNX8550_GPIO_MC_31_BIT 30
+#define PNX8550_GPIO_MC_30_BIT 28
+#define PNX8550_GPIO_MC_29_BIT 26
+#define PNX8550_GPIO_MC_28_BIT 24
+#define PNX8550_GPIO_MC_27_BIT 22
+#define PNX8550_GPIO_MC_26_BIT 20
+#define PNX8550_GPIO_MC_25_BIT 18
+#define PNX8550_GPIO_MC_24_BIT 16
+#define PNX8550_GPIO_MC_23_BIT 14
+#define PNX8550_GPIO_MC_22_BIT 12
+#define PNX8550_GPIO_MC_21_BIT 10
+#define PNX8550_GPIO_MC_20_BIT 8
+#define PNX8550_GPIO_MC_19_BIT 6
+#define PNX8550_GPIO_MC_18_BIT 4
+#define PNX8550_GPIO_MC_17_BIT 2
+#define PNX8550_GPIO_MC_16_BIT 0
+
+#define PNX8550_GPIO_MODE_PRIMOP 0x1
+#define PNX8550_GPIO_MODE_NO_OPENDR 0x2
+#define PNX8550_GPIO_MODE_OPENDR 0x3
+
+// RESET module
+#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0)
+#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4)
+#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8)
+
+#define PNX8550_RST_REL_MIPS_RST_N 0x8
+#define PNX8550_RST_DO_SW_RST 0x4
+#define PNX8550_RST_REL_SYS_RST_OUT 0x2
+#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1
+#endif
diff --git a/include/asm-mips/mach-pnx8550/int.h b/include/asm-mips/mach-pnx8550/int.h
new file mode 100644
index 0000000..0e0668b
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/int.h
@@ -0,0 +1,140 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Interrupt specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_INT_H
+#define __PNX8550_INT_H
+
+#define PNX8550_GIC_BASE 0xBBE3E000
+
+#define PNX8550_GIC_PRIMASK_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000)
+#define PNX8550_GIC_PRIMASK_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004)
+#define PNX8550_GIC_VECTOR_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100)
+#define PNX8550_GIC_VECTOR_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104)
+#define PNX8550_GIC_PEND_1_31 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200)
+#define PNX8550_GIC_PEND_32_63 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204)
+#define PNX8550_GIC_PEND_64_70 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208)
+#define PNX8550_GIC_FEATURES *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300)
+#define PNX8550_GIC_REQ(x) *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4)
+#define PNX8550_GIC_MOD_ID *(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC)
+
+// cp0 is two software + six hw exceptions
+#define PNX8550_INT_CP0_TOTINT 8
+#define PNX8550_INT_CP0_MIN 0
+#define PNX8550_INT_CP0_MAX (PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1)
+
+#define MIPS_CPU_GIC_IRQ 2
+#define MIPS_CPU_TIMER_IRQ 7
+
+// GIC are 71 exceptions connected to cp0's first hardware exception
+#define PNX8550_INT_GIC_TOTINT 71
+#define PNX8550_INT_GIC_MIN (PNX8550_INT_CP0_MAX+1)
+#define PNX8550_INT_GIC_MAX (PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1)
+
+#define PNX8550_INT_UNDEF (PNX8550_INT_GIC_MIN+0)
+#define PNX8550_INT_IPC_TARGET0_MIPS (PNX8550_INT_GIC_MIN+1)
+#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2)
+#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3)
+#define PNX8550_INT_RESERVED_4 (PNX8550_INT_GIC_MIN+4)
+#define PNX8550_INT_USB (PNX8550_INT_GIC_MIN+5)
+#define PNX8550_INT_GPIO_EQ1 (PNX8550_INT_GIC_MIN+6)
+#define PNX8550_INT_GPIO_EQ2 (PNX8550_INT_GIC_MIN+7)
+#define PNX8550_INT_GPIO_EQ3 (PNX8550_INT_GIC_MIN+8)
+#define PNX8550_INT_GPIO_EQ4 (PNX8550_INT_GIC_MIN+9)
+
+#define PNX8550_INT_GPIO_EQ5 (PNX8550_INT_GIC_MIN+10)
+#define PNX8550_INT_GPIO_EQ6 (PNX8550_INT_GIC_MIN+11)
+#define PNX8550_INT_RESERVED_12 (PNX8550_INT_GIC_MIN+12)
+#define PNX8550_INT_QVCP1 (PNX8550_INT_GIC_MIN+13)
+#define PNX8550_INT_QVCP2 (PNX8550_INT_GIC_MIN+14)
+#define PNX8550_INT_I2C1 (PNX8550_INT_GIC_MIN+15)
+#define PNX8550_INT_I2C2 (PNX8550_INT_GIC_MIN+16)
+#define PNX8550_INT_ISO_UART1 (PNX8550_INT_GIC_MIN+17)
+#define PNX8550_INT_ISO_UART2 (PNX8550_INT_GIC_MIN+18)
+#define PNX8550_INT_UART1 (PNX8550_INT_GIC_MIN+19)
+
+#define PNX8550_INT_UART2 (PNX8550_INT_GIC_MIN+20)
+#define PNX8550_INT_QNTR (PNX8550_INT_GIC_MIN+21)
+#define PNX8550_INT_RESERVED22 (PNX8550_INT_GIC_MIN+22)
+#define PNX8550_INT_T_DSC (PNX8550_INT_GIC_MIN+23)
+#define PNX8550_INT_M_DSC (PNX8550_INT_GIC_MIN+24)
+#define PNX8550_INT_RESERVED25 (PNX8550_INT_GIC_MIN+25)
+#define PNX8550_INT_2D_DRAW_ENG (PNX8550_INT_GIC_MIN+26)
+#define PNX8550_INT_MEM_BASED_SCALAR1 (PNX8550_INT_GIC_MIN+27)
+#define PNX8550_INT_VIDEO_MPEG (PNX8550_INT_GIC_MIN+28)
+#define PNX8550_INT_VIDEO_INPUT_P1 (PNX8550_INT_GIC_MIN+29)
+
+#define PNX8550_INT_VIDEO_INPUT_P2 (PNX8550_INT_GIC_MIN+30)
+#define PNX8550_INT_SPDI1 (PNX8550_INT_GIC_MIN+31)
+#define PNX8550_INT_SPDO (PNX8550_INT_GIC_MIN+32)
+#define PNX8550_INT_AUDIO_INPUT1 (PNX8550_INT_GIC_MIN+33)
+#define PNX8550_INT_AUDIO_OUTPUT1 (PNX8550_INT_GIC_MIN+34)
+#define PNX8550_INT_AUDIO_INPUT2 (PNX8550_INT_GIC_MIN+35)
+#define PNX8550_INT_AUDIO_OUTPUT2 (PNX8550_INT_GIC_MIN+36)
+#define PNX8550_INT_MEMBASED_SCALAR2 (PNX8550_INT_GIC_MIN+37)
+#define PNX8550_INT_VPK (PNX8550_INT_GIC_MIN+38)
+#define PNX8550_INT_MPEG1_MIPS (PNX8550_INT_GIC_MIN+39)
+
+#define PNX8550_INT_MPEG1_TM (PNX8550_INT_GIC_MIN+40)
+#define PNX8550_INT_MPEG2_MIPS (PNX8550_INT_GIC_MIN+41)
+#define PNX8550_INT_MPEG2_TM (PNX8550_INT_GIC_MIN+42)
+#define PNX8550_INT_TS_DMA (PNX8550_INT_GIC_MIN+43)
+#define PNX8550_INT_EDMA (PNX8550_INT_GIC_MIN+44)
+#define PNX8550_INT_TM_DEBUG1 (PNX8550_INT_GIC_MIN+45)
+#define PNX8550_INT_TM_DEBUG2 (PNX8550_INT_GIC_MIN+46)
+#define PNX8550_INT_PCI_INTA (PNX8550_INT_GIC_MIN+47)
+#define PNX8550_INT_CLOCK_MODULE (PNX8550_INT_GIC_MIN+48)
+#define PNX8550_INT_PCI_XIO_INTA_PCI (PNX8550_INT_GIC_MIN+49)
+
+#define PNX8550_INT_PCI_XIO_INTB_DMA (PNX8550_INT_GIC_MIN+50)
+#define PNX8550_INT_PCI_XIO_INTC_GPPM (PNX8550_INT_GIC_MIN+51)
+#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52)
+#define PNX8550_INT_DVD_CSS (PNX8550_INT_GIC_MIN+53)
+#define PNX8550_INT_VLD (PNX8550_INT_GIC_MIN+54)
+#define PNX8550_INT_GPIO_TSU_7_0 (PNX8550_INT_GIC_MIN+55)
+#define PNX8550_INT_GPIO_TSU_15_8 (PNX8550_INT_GIC_MIN+56)
+#define PNX8550_INT_GPIO_CTU_IR (PNX8550_INT_GIC_MIN+57)
+#define PNX8550_INT_GPIO0 (PNX8550_INT_GIC_MIN+58)
+#define PNX8550_INT_GPIO1 (PNX8550_INT_GIC_MIN+59)
+
+#define PNX8550_INT_GPIO2 (PNX8550_INT_GIC_MIN+60)
+#define PNX8550_INT_GPIO3 (PNX8550_INT_GIC_MIN+61)
+#define PNX8550_INT_GPIO4 (PNX8550_INT_GIC_MIN+62)
+#define PNX8550_INT_GPIO5 (PNX8550_INT_GIC_MIN+63)
+#define PNX8550_INT_GPIO6 (PNX8550_INT_GIC_MIN+64)
+#define PNX8550_INT_GPIO7 (PNX8550_INT_GIC_MIN+65)
+#define PNX8550_INT_PMAN_SECURITY (PNX8550_INT_GIC_MIN+66)
+#define PNX8550_INT_I2C3 (PNX8550_INT_GIC_MIN+67)
+#define PNX8550_INT_RESERVED_68 (PNX8550_INT_GIC_MIN+68)
+#define PNX8550_INT_SPDI2 (PNX8550_INT_GIC_MIN+69)
+
+#define PNX8550_INT_I2C4 (PNX8550_INT_GIC_MIN+70)
+
+// Timer are 3 exceptions connected to cp0's 7th hardware exception
+#define PNX8550_INT_TIMER_TOTINT 3
+#define PNX8550_INT_TIMER_MIN (PNX8550_INT_GIC_MAX+1)
+#define PNX8550_INT_TIMER_MAX (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1)
+
+#define PNX8550_INT_TIMER1 (PNX8550_INT_TIMER_MIN+0)
+#define PNX8550_INT_TIMER2 (PNX8550_INT_TIMER_MIN+1)
+#define PNX8550_INT_TIMER3 (PNX8550_INT_TIMER_MIN+2)
+#define PNX8550_INT_WATCHDOG PNX8550_INT_TIMER3
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/kernel-entry-init.h b/include/asm-mips/mach-pnx8550/kernel-entry-init.h
new file mode 100644
index 0000000..57102fa
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/kernel-entry-init.h
@@ -0,0 +1,262 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ */
+#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_KERNEL_ENTRY_INIT_H
+
+#include <asm/cacheops.h>
+#include <asm/addrspace.h>
+
+#define CO_CONFIGPR_VALID 0x3F1F41FF /* valid bits to write to ConfigPR */
+#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;
+#define CACHE_OPC 0xBC000000 /* MIPS cache instruction opcode */
+#define ICACHE_LINE_SIZE 32 /* Instruction cache line size bytes */
+#define DCACHE_LINE_SIZE 32 /* Data cache line size in bytes */
+
+#define ICACHE_SET_COUNT 256 /* Instruction cache set count */
+#define DCACHE_SET_COUNT 128 /* Data cache set count */
+
+#define ICACHE_SET_SIZE (ICACHE_SET_COUNT * ICACHE_LINE_SIZE)
+#define DCACHE_SET_SIZE (DCACHE_SET_COUNT * DCACHE_LINE_SIZE)
+
+ .macro kernel_entry_setup
+ .set push
+ .set noreorder
+ /*
+ * PNX8550 entry point, when running a non compressed
+ * kernel. When loading a zImage, the head.S code in
+ * arch/mips/zboot/pnx8550 will init the caches and,
+ * decompress the kernel, and branch to kernel_entry.
+ */
+cache_begin: li t0, (1<<28)
+ mtc0 t0, CP0_STATUS /* cp0 usable */
+ HAZARD_CP0
+
+ mtc0 zero, CP0_CAUSE
+ HAZARD_CP0
+
+
+ /* Set static virtual to phys address translation and TLB disabled */
+ mfc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ and t0,~((1<<19) | (1<<20)) /* TLB/MAP cleared */
+ mtc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ /* CPU boots with kseg0 cache algo set to 0x2 -- uncached */
+
+ init_icache
+ nop
+ init_dcache
+ nop
+
+ cachePr4450ICReset
+ nop
+
+ cachePr4450DCReset
+ nop
+
+ /* read ConfigPR into t0 */
+ mfc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ /* enable the TLB */
+ or t0, (1<<19)
+
+ /* disable the ICACHE: at least 10x slower */
+ /* or t0, (1<<26) */
+
+ /* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set */
+ /* or t0, (1<<27) */
+
+ and t0, CO_CONFIGPR_VALID
+
+ /* enable TLB. */
+ mtc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+cache_end:
+ /* Setup CMEM_0 to MMIO address space, 2MB */
+ lui t0, 0x1BE0
+ addi t0, t0, 0x3
+ mtc0 $8, $22, 4
+ nop
+
+ /* Setup CMEM_1, 128MB */
+ lui t0, 0x1000
+ addi t0, t0, 0xf
+ mtc0 $8, $22, 5
+ nop
+
+
+ /* Setup CMEM_2, 32MB */
+ lui t0, 0x1C00
+ addi t0, t0, 0xb
+ mtc0 $8, $22, 6
+ nop
+
+ /* Setup CMEM_3, 0MB */
+ lui t0, 0x0
+ addi t0, t0, 0x0
+ mtc0 $8, $22, 7
+ nop
+
+ /* Enable cache */
+ mfc0 t0, CP0_CONFIG
+ HAZARD_CP0
+ and t0, t0, 0xFFFFFFF8
+ or t0, t0, 3
+ mtc0 t0, CP0_CONFIG
+ HAZARD_CP0
+ .set pop
+ .endm
+
+ .macro init_icache
+ .set push
+ .set noreorder
+
+ /* Get Cache Configuration */
+ mfc0 t3, CP0_CONFIG, 1
+ HAZARD_CP0
+
+ /* get cache Line size */
+
+ srl t1, t3, 19 /* C0_CONFIGPR_IL_SHIFT */
+ andi t1, t1, 0x7 /* C0_CONFIGPR_IL_MASK */
+ beq t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */
+ nop
+ addiu t0, t1, 1
+ ori t1, zero, 1
+ sllv t1, t1, t0
+
+ /* get max cache Index */
+ srl t2, t3, 22 /* C0_CONFIGPR_IS_SHIFT */
+ andi t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */
+ addiu t0, t2, 6
+ ori t2, zero, 1
+ sllv t2, t2, t0
+
+ /* get max cache way */
+ srl t3, t3, 16 /* C0_CONFIGPR_IA_SHIFT */
+ andi t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */
+ addiu t3, t3, 1
+
+ /* total no of cache lines */
+ multu t2, t3 /* max index * max way */
+ mflo t2
+ addiu t2, t2, -1
+
+ move t0, zero
+pr4450_next_instruction_cache_set:
+ cache Index_Invalidate_I, 0(t0)
+ addu t0, t0, t1 /* add bytes in a line */
+ bne t2, zero, pr4450_next_instruction_cache_set
+ addiu t2, t2, -1 /* reduce no of lines to invalidate by one */
+pr4450_instr_cache_invalidated:
+ .set pop
+ .endm
+
+ .macro init_dcache
+ .set push
+ .set noreorder
+ move t1, zero
+
+ /* Store Tag Information */
+ mtc0 zero, CP0_TAGLO, 0
+ HAZARD_CP0
+
+ mtc0 zero, CP0_TAGHI, 0
+ HAZARD_CP0
+
+ /* Cache size is 16384 = 512 lines x 32 bytes per line */
+ or t2, zero, (128*4)-1 /* 512 lines */
+ /* Invalidate all lines */
+2:
+ cache Index_Store_Tag_D, 0(t1)
+ addiu t2, t2, -1
+ bne t2, zero, 2b
+ addiu t1, t1, 32 /* 32 bytes in a line */
+ .set pop
+ .endm
+
+ .macro cachePr4450ICReset
+ .set push
+ .set noreorder
+
+ /* Save CP0 status reg on entry; */
+ /* disable interrupts during cache reset */
+ mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */
+ HAZARD_CP0
+
+ mtc0 zero, CP0_STATUS /* disable CPU interrupts */
+ HAZARD_CP0
+
+ or t1, zero, zero /* T1 = starting cache index (0) */
+ ori t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */
+
+ icache_invd_loop:
+ /* 9 == register t1 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+ (0 * ICACHE_SET_SIZE)) /* invalidate inst cache WAY0 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+ (1 * ICACHE_SET_SIZE)) /* invalidate inst cache WAY1 */
+
+ addiu t1, t1, ICACHE_LINE_SIZE /* T1 = next cache line index */
+ bne t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */
+ addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */
+
+ /* Initialize the latches in the instruction cache tag */
+ /* that drive the way selection tri-state bus drivers, by doing a */
+ /* dummy load while the instruction cache is still disabled. */
+ /* TODO: Is this needed ? */
+ la t1, KSEG0 /* T1 = cached memory base address */
+ lw zero, 0x0000(t1) /* (dummy read of first memory word) */
+
+ mtc0 t0, CP0_STATUS /* restore interrupt status on entry */
+ HAZARD_CP0
+ .set pop
+ .endm
+
+ .macro cachePr4450DCReset
+ .set push
+ .set noreorder
+ mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */
+ HAZARD_CP0
+ mtc0 zero, CP0_STATUS /* disable CPU interrupts */
+ HAZARD_CP0
+
+ /* Writeback/invalidate entire data cache sets/ways/lines */
+ or t1, zero, zero /* T1 = starting cache index (0) */
+ ori t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */
+
+ dcache_wbinvd_loop:
+ /* 9 == register t1 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (0 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY0 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (1 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY1 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (2 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY2 */
+ .word (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (3 * DCACHE_SET_SIZE)) /* writeback/invalidate WAY3 */
+
+ addiu t1, t1, DCACHE_LINE_SIZE /* T1 = next data cache line index */
+ bne t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */
+ addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */
+
+ /* Initialize the latches in the data cache tag that drive the way
+ selection tri-state bus drivers, by doing a dummy load while the
+ data cache is still in the disabled mode. TODO: Is this needed ? */
+ la t1, KSEG0 /* T1 = cached memory base address */
+ lw zero, 0x0000(t1) /* (dummy read of first memory word) */
+
+ mtc0 t0, CP0_STATUS /* restore interrupt status on entry */
+ HAZARD_CP0
+ .set pop
+ .endm
+
+#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */
diff --git a/include/asm-mips/mach-pnx8550/nand.h b/include/asm-mips/mach-pnx8550/nand.h
new file mode 100644
index 0000000..aefbc51
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/nand.h
@@ -0,0 +1,121 @@
+#ifndef __PNX8550_NAND_H
+#define __PNX8550_NAND_H
+
+#define PNX8550_NAND_BASE_ADDR 0x10000000
+#define PNX8550_PCIXIO_BASE 0xBBE40000
+
+#define PNX8550_DMA_EXT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800)
+#define PNX8550_DMA_INT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804)
+#define PNX8550_DMA_TRANS_SIZE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808)
+#define PNX8550_DMA_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c)
+#define PNX8550_XIO_SEL0 *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814)
+#define PNX8550_GPXIO_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820)
+#define PNX8550_GPXIO_WR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824)
+#define PNX8550_GPXIO_RD *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828)
+#define PNX8550_GPXIO_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C)
+#define PNX8550_XIO_FLASH_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830)
+#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0)
+#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4)
+#define PNX8550_GPXIO_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8)
+#define PNX8550_DMA_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0)
+#define PNX8550_DMA_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4)
+#define PNX8550_DMA_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8)
+
+#define PNX8550_XIO_SEL0_EN_16BIT 0x00800000
+#define PNX8550_XIO_SEL0_USE_ACK 0x00400000
+#define PNX8550_XIO_SEL0_REN_HIGH 0x00100000
+#define PNX8550_XIO_SEL0_REN_LOW 0x00040000
+#define PNX8550_XIO_SEL0_WEN_HIGH 0x00010000
+#define PNX8550_XIO_SEL0_WEN_LOW 0x00004000
+#define PNX8550_XIO_SEL0_WAIT 0x00000200
+#define PNX8550_XIO_SEL0_OFFSET 0x00000020
+#define PNX8550_XIO_SEL0_TYPE_68360 0x00000000
+#define PNX8550_XIO_SEL0_TYPE_NOR 0x00000008
+#define PNX8550_XIO_SEL0_TYPE_NAND 0x00000010
+#define PNX8550_XIO_SEL0_TYPE_IDE 0x00000018
+#define PNX8550_XIO_SEL0_SIZE_8MB 0x00000000
+#define PNX8550_XIO_SEL0_SIZE_16MB 0x00000002
+#define PNX8550_XIO_SEL0_SIZE_32MB 0x00000004
+#define PNX8550_XIO_SEL0_SIZE_64MB 0x00000006
+#define PNX8550_XIO_SEL0_ENAB 0x00000001
+
+#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT) | \
+ (PNX8550_XIO_SEL0_REN_HIGH*0)| \
+ (PNX8550_XIO_SEL0_REN_LOW*2) | \
+ (PNX8550_XIO_SEL0_WEN_HIGH*0)| \
+ (PNX8550_XIO_SEL0_WEN_LOW*2) | \
+ (PNX8550_XIO_SEL0_WAIT*4) | \
+ (PNX8550_XIO_SEL0_OFFSET*0) | \
+ (PNX8550_XIO_SEL0_TYPE_NAND) | \
+ (PNX8550_XIO_SEL0_SIZE_32MB) | \
+ (PNX8550_XIO_SEL0_ENAB))
+
+#define PNX8550_GPXIO_PENDING 0x00000200
+#define PNX8550_GPXIO_DONE 0x00000100
+#define PNX8550_GPXIO_CLR_DONE 0x00000080
+#define PNX8550_GPXIO_INIT 0x00000040
+#define PNX8550_GPXIO_READ_CMD 0x00000010
+#define PNX8550_GPXIO_BEN 0x0000000F
+
+#define PNX8550_XIO_FLASH_64MB 0x00200000
+#define PNX8550_XIO_FLASH_INC_DATA 0x00100000
+#define PNX8550_XIO_FLASH_CMD_PH 0x000C0000
+#define PNX8550_XIO_FLASH_CMD_PH2 0x00080000
+#define PNX8550_XIO_FLASH_CMD_PH1 0x00040000
+#define PNX8550_XIO_FLASH_CMD_PH0 0x00000000
+#define PNX8550_XIO_FLASH_ADR_PH 0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH3 0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH2 0x00020000
+#define PNX8550_XIO_FLASH_ADR_PH1 0x00010000
+#define PNX8550_XIO_FLASH_ADR_PH0 0x00000000
+#define PNX8550_XIO_FLASH_CMD_B(x) ((x<<8) & 0x0000FF00)
+#define PNX8550_XIO_FLASH_CMD_A(x) (x & 0x000000FF)
+
+#define PNX8550_XIO_INT_ACK 0x00004000
+#define PNX8550_XIO_INT_COMPL 0x00002000
+#define PNX8550_XIO_INT_NONSUP 0x00000200
+#define PNX8550_XIO_INT_ABORT 0x00000004
+
+#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400
+#define PNX8550_DMA_CTRL_SND2XIO 0x00000200
+#define PNX8550_DMA_CTRL_FIX_ADDR 0x00000100
+#define PNX8550_DMA_CTRL_BURST_8 0x00000000
+#define PNX8550_DMA_CTRL_BURST_16 0x00000020
+#define PNX8550_DMA_CTRL_BURST_32 0x00000040
+#define PNX8550_DMA_CTRL_BURST_64 0x00000060
+#define PNX8550_DMA_CTRL_BURST_128 0x00000080
+#define PNX8550_DMA_CTRL_BURST_256 0x000000A0
+#define PNX8550_DMA_CTRL_BURST_512 0x000000C0
+#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0
+#define PNX8550_DMA_CTRL_INIT_DMA 0x00000010
+#define PNX8550_DMA_CTRL_CMD_TYPE 0x0000000F
+
+/* see PCI system arch, page 100 for the full list: */
+#define PNX8550_DMA_CTRL_PCI_CMD_READ 0x00000006
+#define PNX8550_DMA_CTRL_PCI_CMD_WRITE 0x00000007
+
+#define PNX8550_DMA_INT_STAT_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_STAT_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_STAT_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_STAT_PERR5 (1<<5)
+#define PNX8550_DMA_INT_STAT_PERR4 (1<<4)
+#define PNX8550_DMA_INT_STAT_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_STAT_T_ABORT (1<<1)
+
+#define PNX8550_DMA_INT_EN_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_EN_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_EN_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_EN_PERR5 (1<<5)
+#define PNX8550_DMA_INT_EN_PERR4 (1<<4)
+#define PNX8550_DMA_INT_EN_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_EN_T_ABORT (1<<1)
+
+#define PNX8550_DMA_INT_CLR_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_CLR_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_CLR_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_CLR_PERR5 (1<<5)
+#define PNX8550_DMA_INT_CLR_PERR4 (1<<4)
+#define PNX8550_DMA_INT_CLR_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_CLR_T_ABORT (1<<1)
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/pci.h b/include/asm-mips/mach-pnx8550/pci.h
new file mode 100644
index 0000000..b921508
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/pci.h
@@ -0,0 +1,185 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PCI specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_PCI_H
+#define __PNX8550_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+#define PCI_CMD_IOR 0x20
+#define PCI_CMD_IOW 0x30
+#define PCI_CMD_CONFIG_READ 0xa0
+#define PCI_CMD_CONFIG_WRITE 0xb0
+
+#define PCI_IO_TIMEOUT 1000
+#define PCI_IO_RETRY 5
+/* Timeout for IO and CFG accesses.
+ This is in 1/1024 th of a jiffie(=10ms)
+ i.e. approx 10us */
+#define PCI_IO_JIFFIES_TIMEOUT 40
+#define PCI_IO_JIFFIES_SHIFT 10
+
+#define PCI_BYTE_ENABLE_MASK 0x0000000f
+#define PCI_CFG_BUS_SHIFT 16
+#define PCI_CFG_FUNC_SHIFT 8
+#define PCI_CFG_REG_SHIFT 2
+
+#define PCI_BASE 0x1be00000
+#define PCI_SETUP 0x00040010
+#define PCI_DIS_REQGNT (1<<30)
+#define PCI_DIS_REQGNTA (1<<29)
+#define PCI_DIS_REQGNTB (1<<28)
+#define PCI_D2_SUPPORT (1<<27)
+#define PCI_D1_SUPPORT (1<<26)
+#define PCI_EN_TA (1<<24)
+#define PCI_EN_PCI2MMI (1<<23)
+#define PCI_EN_XIO (1<<22)
+#define PCI_BASE18_PREF (1<<21)
+#define SIZE_16M 0x3
+#define SIZE_32M 0x4
+#define SIZE_64M 0x5
+#define SIZE_128M 0x6
+#define PCI_SETUP_BASE18_SIZE(X) (X<<18)
+#define PCI_SETUP_BASE18_EN (1<<17)
+#define PCI_SETUP_BASE14_PREF (1<<16)
+#define PCI_SETUP_BASE14_SIZE(X) (X<<12)
+#define PCI_SETUP_BASE14_EN (1<<11)
+#define PCI_SETUP_BASE10_PREF (1<<10)
+#define PCI_SETUP_BASE10_SIZE(X) (X<<7)
+#define PCI_SETUP_CFGMANAGE_EN (1<<1)
+#define PCI_SETUP_PCIARB_EN (1<<0)
+
+#define PCI_CTRL 0x040014
+#define PCI_SWPB_DCS_PCI (1<<16)
+#define PCI_SWPB_PCI_PCI (1<<15)
+#define PCI_SWPB_PCI_DCS (1<<14)
+#define PCI_REG_WR_POST (1<<13)
+#define PCI_XIO_WR_POST (1<<12)
+#define PCI_PCI2_WR_POST (1<<13)
+#define PCI_PCI1_WR_POST (1<<12)
+#define PCI_SERR_SEEN (1<<11)
+#define PCI_B10_SPEC_RD (1<<6)
+#define PCI_B14_SPEC_RD (1<<5)
+#define PCI_B18_SPEC_RD (1<<4)
+#define PCI_B10_NOSUBWORD (1<<3)
+#define PCI_B14_NOSUBWORD (1<<2)
+#define PCI_B18_NOSUBWORD (1<<1)
+#define PCI_RETRY_TMREN (1<<0)
+
+#define PCI_BASE1_LO 0x040018
+#define PCI_BASE1_HI 0x04001C
+#define PCI_BASE2_LO 0x040020
+#define PCI_BASE2_HI 0x040024
+#define PCI_RDLIFETIM 0x040028
+#define PCI_GPPM_ADDR 0x04002C
+#define PCI_GPPM_WDAT 0x040030
+#define PCI_GPPM_RDAT 0x040034
+#define PCI_GPPM_CTRL 0x040038
+#define GPPM_DONE (1<<10)
+#define INIT_PCI_CYCLE (1<<9)
+#define GPPM_CMD(X) (((X)&0xf)<<4)
+#define GPPM_BYTEEN(X) ((X)&0xf)
+#define PCI_UNLOCKREG 0x04003C
+#define UNLOCK_SSID(X) (((X)&0xff)<<8)
+#define UNLOCK_SETUP(X) (((X)&0xff)<<0)
+#define UNLOCK_MAGIC 0xCA
+#define PCI_DEV_VEND_ID 0x040040
+#define DEVICE_ID(X) (((X)>>16)&0xffff)
+#define VENDOR_ID(X) (((X)&0xffff))
+#define PCI_CFG_CMDSTAT 0x040044
+#define PCI_CFG_STATUS(X) (((X)>>16)&0xffff)
+#define PCI_CFG_COMMAND(X) ((X)&0xffff)
+#define PCI_CLASS_REV 0x040048
+#define PCI_CLASSCODE(X) (((X)>>8)&0xffffff)
+#define PCI_REVID(X) ((X)&0xff)
+#define PCI_LAT_TMR 0x04004c
+#define PCI_BASE10 0x040050
+#define PCI_BASE14 0x040054
+#define PCI_BASE18 0x040058
+#define PCI_SUBSYS_ID 0x04006c
+#define PCI_CAP_PTR 0x040074
+#define PCI_CFG_MISC 0x04007c
+#define PCI_PMC 0x040080
+#define PCI_PWR_STATE 0x040084
+#define PCI_IO 0x040088
+#define PCI_SLVTUNING 0x04008C
+#define PCI_DMATUNING 0x040090
+#define PCI_DMAEADDR 0x040800
+#define PCI_DMAIADDR 0x040804
+#define PCI_DMALEN 0x040808
+#define PCI_DMACTRL 0x04080C
+#define PCI_XIOCTRL 0x040810
+#define PCI_SEL0PROF 0x040814
+#define PCI_SEL1PROF 0x040818
+#define PCI_SEL2PROF 0x04081C
+#define PCI_GPXIOADDR 0x040820
+#define PCI_NANDCTRLS 0x400830
+#define PCI_SEL3PROF 0x040834
+#define PCI_SEL4PROF 0x040838
+#define PCI_GPXIO_STAT 0x040FB0
+#define PCI_GPXIO_IMASK 0x040FB4
+#define PCI_GPXIO_ICLR 0x040FB8
+#define PCI_GPXIO_ISET 0x040FBC
+#define PCI_GPPM_STATUS 0x040FC0
+#define GPPM_DONE (1<<10)
+#define GPPM_ERR (1<<9)
+#define GPPM_MPAR_ERR (1<<8)
+#define GPPM_PAR_ERR (1<<7)
+#define GPPM_R_MABORT (1<<2)
+#define GPPM_R_TABORT (1<<1)
+#define PCI_GPPM_IMASK 0x040FC4
+#define PCI_GPPM_ICLR 0x040FC8
+#define PCI_GPPM_ISET 0x040FCC
+#define PCI_DMA_STATUS 0x040FD0
+#define PCI_DMA_IMASK 0x040FD4
+#define PCI_DMA_ICLR 0x040FD8
+#define PCI_DMA_ISET 0x040FDC
+#define PCI_ISTATUS 0x040FE0
+#define PCI_IMASK 0x040FE4
+#define PCI_ICLR 0x040FE8
+#define PCI_ISET 0x040FEC
+#define PCI_MOD_ID 0x040FFC
+
+/*
+ * PCI configuration cycle AD bus definition
+ */
+/* Type 0 */
+#define PCI_CFG_TYPE0_REG_SHF 0
+#define PCI_CFG_TYPE0_FUNC_SHF 8
+
+/* Type 1 */
+#define PCI_CFG_TYPE1_REG_SHF 0
+#define PCI_CFG_TYPE1_FUNC_SHF 8
+#define PCI_CFG_TYPE1_DEV_SHF 11
+#define PCI_CFG_TYPE1_BUS_SHF 16
+
+/*
+ * Ethernet device DP83816 definition
+ */
+#define DP83816_IRQ_ETHER 66
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/uart.h b/include/asm-mips/mach-pnx8550/uart.h
new file mode 100644
index 0000000..e32b9a2
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/uart.h
@@ -0,0 +1,16 @@
+#ifndef __IP3106_UART_H
+#define __IP3106_UART_H
+
+#include <int.h>
+
+/* early macros for kgdb use. fixme: clean this up */
+
+#define UART_BASE 0xbbe4a000 /* PNX8550 */
+
+#define PNX8550_UART_PORT0 (UART_BASE)
+#define PNX8550_UART_PORT1 (UART_BASE + 0x1000)
+
+#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x)
+#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19)
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/usb.h b/include/asm-mips/mach-pnx8550/usb.h
new file mode 100644
index 0000000..483b7fc
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/usb.h
@@ -0,0 +1,32 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * USB specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_USB_H
+#define __PNX8550_USB_H
+
+/*
+ * USB Host controller
+ */
+
+#define PNX8550_USB_OHCI_OP_BASE 0x1be48000
+#define PNX8550_USB_OHCI_OP_LEN 0x1000
+
+#endif
diff --git a/include/asm-mips/mach-rm200/cpu-feature-overrides.h b/include/asm-mips/mach-rm200/cpu-feature-overrides.h
index f487360..79f9b06 100644
--- a/include/asm-mips/mach-rm200/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-rm200/cpu-feature-overrides.h
@@ -14,7 +14,7 @@
#define cpu_has_tlb 1
#define cpu_has_4kex 1
-#define cpu_has_4ktlb 1
+#define cpu_has_4kcache 1
#define cpu_has_fpu 1
#define cpu_has_32fpr 1
#define cpu_has_counter 1
@@ -31,6 +31,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
diff --git a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
index a3a2cc6..193a666 100644
--- a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
@@ -25,6 +25,7 @@
#define cpu_has_vtag_icache 1
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
diff --git a/include/asm-mips/mach-sim/cpu-feature-overrides.h b/include/asm-mips/mach-sim/cpu-feature-overrides.h
new file mode 100644
index 0000000..cadbe8e
--- /dev/null
+++ b/include/asm-mips/mach-sim/cpu-feature-overrides.h
@@ -0,0 +1,66 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ */
+#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+
+#include <linux/config.h>
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4kcache 1
+#define cpu_has_fpu 0
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#define cpu_has_llsc 1
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_subset_pcaches ? */
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4kcache 1
+/* #define cpu_has_fpu ? */
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#define cpu_has_llsc 1
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_subset_pcaches ? */
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
index 58603e3..463d051 100644
--- a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
@@ -25,6 +25,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
#define cpu_icache_snoops_remote_store 0
#define cpu_has_nofpuex 0
@@ -36,10 +37,4 @@
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 32
-/*
- * On the RM9000 we need to ensure that I-cache lines being fetches only
- * contain valid instructions are funny things will happen.
- */
-#define PLAT_TRAMPOLINE_STUFF_LINE 32UL
-
#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h
index 65d1d16..25b6ffc 100644
--- a/include/asm-mips/mips-boards/generic.h
+++ b/include/asm-mips/mips-boards/generic.h
@@ -66,6 +66,7 @@
#define MIPS_REVISION_CORID_CORE_EMUL 6
#define MIPS_REVISION_CORID_CORE_FPGA2 7
#define MIPS_REVISION_CORID_CORE_FPGAR2 8
+#define MIPS_REVISION_CORID_CORE_FPGA3 9
/**** Artificial corid defines ****/
/*
@@ -79,4 +80,10 @@
extern unsigned int mips_revision_corid;
+#ifdef CONFIG_PCI
+extern void mips_pcibios_init(void);
+#else
+#define mips_pcibios_init() do { } while (0)
+#endif
+
#endif /* __ASM_MIPS_BOARDS_GENERIC_H */
diff --git a/include/asm-mips/mips-boards/maltaint.h b/include/asm-mips/mips-boards/maltaint.h
index 3761818..da6cc2f 100644
--- a/include/asm-mips/mips-boards/maltaint.h
+++ b/include/asm-mips/mips-boards/maltaint.h
@@ -25,9 +25,63 @@
#ifndef _MIPS_MALTAINT_H
#define _MIPS_MALTAINT_H
-/* Number of IRQ supported on hw interrupt 0. */
-#define MALTAINT_END 16
+/*
+ * Interrupts 0..15 are used for Malta ISA compatible interrupts
+ */
+#define MALTA_INT_BASE 0
+/*
+ * Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode)
+ */
+#define MIPSCPU_INT_BASE 16
+
+/* CPU interrupt offsets */
+#define MIPSCPU_INT_SW0 0
+#define MIPSCPU_INT_SW1 1
+#define MIPSCPU_INT_MB0 2
+#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0
+#define MIPSCPU_INT_MB1 3
+#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1
+#define MIPSCPU_INT_MB2 4
+#define MIPSCPU_INT_MB3 5
+#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3
+#define MIPSCPU_INT_MB4 6
+#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4
+#define MIPSCPU_INT_CPUCTR 7
+
+/*
+ * Interrupts 64..127 are used for Soc-it Classic interrupts
+ */
+#define MSC01C_INT_BASE 64
+
+/* SOC-it Classic interrupt offsets */
+#define MSC01C_INT_TMR 0
+#define MSC01C_INT_PCI 1
+
+/*
+ * Interrupts 64..127 are used for Soc-it EIC interrupts
+ */
+#define MSC01E_INT_BASE 64
+
+/* SOC-it EIC interrupt offsets */
+#define MSC01E_INT_SW0 1
+#define MSC01E_INT_SW1 2
+#define MSC01E_INT_MB0 3
+#define MSC01E_INT_I8259A MSC01E_INT_MB0
+#define MSC01E_INT_MB1 4
+#define MSC01E_INT_SMI MSC01E_INT_MB1
+#define MSC01E_INT_MB2 5
+#define MSC01E_INT_MB3 6
+#define MSC01E_INT_COREHI MSC01E_INT_MB3
+#define MSC01E_INT_MB4 7
+#define MSC01E_INT_CORELO MSC01E_INT_MB4
+#define MSC01E_INT_TMR 8
+#define MSC01E_INT_PCI 9
+#define MSC01E_INT_PERFCTR 10
+#define MSC01E_INT_CPUCTR 11
+
+#ifndef __ASSEMBLY__
extern void maltaint_init(void);
+#endif
#endif /* !(_MIPS_MALTAINT_H) */
diff --git a/include/asm-mips/mips-boards/msc01_pci.h b/include/asm-mips/mips-boards/msc01_pci.h
index 6b2a87a..8eaefb8 100644
--- a/include/asm-mips/mips-boards/msc01_pci.h
+++ b/include/asm-mips/mips-boards/msc01_pci.h
@@ -1,8 +1,9 @@
/*
* PCI Register definitions for the MIPS System Controller.
*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2002, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -29,22 +30,22 @@
#define MSC01_PCI_CFGADDR_OFS 0x0610
#define MSC01_PCI_CFGDATA_OFS 0x0618
#define MSC01_PCI_IACK_OFS 0x0620
-#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */
-#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */
-#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */
-#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */
-#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */
-#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */
-#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */
-#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */
-#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */
-#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */
-#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */
-#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */
-#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */
-#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */
-#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */
-#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */
+#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */
+#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */
+#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */
+#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */
+#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */
+#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */
+#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */
+#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */
+#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */
+#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */
+#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */
+#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */
+#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */
+#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */
+#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */
+#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */
#define MSC01_PCI_BAR0_OFS 0x2220
#define MSC01_PCI_CFG_OFS 0x2380
#define MSC01_PCI_SWAP_OFS 0x2388
@@ -86,73 +87,73 @@
#define MSC01_PCI_P2SCMAPL_MAP_SHF 24
#define MSC01_PCI_P2SCMAPL_MAP_MSK 0xff000000
-#define MSC01_PCI_INTCFG_RST_SHF 10
-#define MSC01_PCI_INTCFG_RST_MSK 0x00000400
-#define MSC01_PCI_INTCFG_RST_BIT 0x00000400
-#define MSC01_PCI_INTCFG_MWE_SHF 9
-#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200
-#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200
-#define MSC01_PCI_INTCFG_DTO_SHF 8
-#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100
-#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100
-#define MSC01_PCI_INTCFG_MA_SHF 7
-#define MSC01_PCI_INTCFG_MA_MSK 0x00000080
-#define MSC01_PCI_INTCFG_MA_BIT 0x00000080
-#define MSC01_PCI_INTCFG_TA_SHF 6
-#define MSC01_PCI_INTCFG_TA_MSK 0x00000040
-#define MSC01_PCI_INTCFG_TA_BIT 0x00000040
-#define MSC01_PCI_INTCFG_RTY_SHF 5
-#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020
-#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020
-#define MSC01_PCI_INTCFG_MWP_SHF 4
-#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010
-#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010
-#define MSC01_PCI_INTCFG_MRP_SHF 3
-#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008
-#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008
-#define MSC01_PCI_INTCFG_SWP_SHF 2
-#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004
-#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004
-#define MSC01_PCI_INTCFG_SRP_SHF 1
-#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002
-#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002
-#define MSC01_PCI_INTCFG_SE_SHF 0
-#define MSC01_PCI_INTCFG_SE_MSK 0x00000001
-#define MSC01_PCI_INTCFG_SE_BIT 0x00000001
+#define MSC01_PCI_INTCFG_RST_SHF 10
+#define MSC01_PCI_INTCFG_RST_MSK 0x00000400
+#define MSC01_PCI_INTCFG_RST_BIT 0x00000400
+#define MSC01_PCI_INTCFG_MWE_SHF 9
+#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200
+#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200
+#define MSC01_PCI_INTCFG_DTO_SHF 8
+#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100
+#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100
+#define MSC01_PCI_INTCFG_MA_SHF 7
+#define MSC01_PCI_INTCFG_MA_MSK 0x00000080
+#define MSC01_PCI_INTCFG_MA_BIT 0x00000080
+#define MSC01_PCI_INTCFG_TA_SHF 6
+#define MSC01_PCI_INTCFG_TA_MSK 0x00000040
+#define MSC01_PCI_INTCFG_TA_BIT 0x00000040
+#define MSC01_PCI_INTCFG_RTY_SHF 5
+#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020
+#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020
+#define MSC01_PCI_INTCFG_MWP_SHF 4
+#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010
+#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010
+#define MSC01_PCI_INTCFG_MRP_SHF 3
+#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008
+#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008
+#define MSC01_PCI_INTCFG_SWP_SHF 2
+#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004
+#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004
+#define MSC01_PCI_INTCFG_SRP_SHF 1
+#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002
+#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002
+#define MSC01_PCI_INTCFG_SE_SHF 0
+#define MSC01_PCI_INTCFG_SE_MSK 0x00000001
+#define MSC01_PCI_INTCFG_SE_BIT 0x00000001
-#define MSC01_PCI_INTSTAT_RST_SHF 10
-#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400
-#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400
-#define MSC01_PCI_INTSTAT_MWE_SHF 9
-#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200
-#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200
-#define MSC01_PCI_INTSTAT_DTO_SHF 8
-#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100
-#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100
-#define MSC01_PCI_INTSTAT_MA_SHF 7
-#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080
-#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080
-#define MSC01_PCI_INTSTAT_TA_SHF 6
-#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040
-#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040
-#define MSC01_PCI_INTSTAT_RTY_SHF 5
-#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020
-#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020
-#define MSC01_PCI_INTSTAT_MWP_SHF 4
-#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010
-#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010
-#define MSC01_PCI_INTSTAT_MRP_SHF 3
-#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008
-#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008
-#define MSC01_PCI_INTSTAT_SWP_SHF 2
-#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004
-#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004
-#define MSC01_PCI_INTSTAT_SRP_SHF 1
-#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002
-#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002
-#define MSC01_PCI_INTSTAT_SE_SHF 0
-#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001
-#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001
+#define MSC01_PCI_INTSTAT_RST_SHF 10
+#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400
+#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400
+#define MSC01_PCI_INTSTAT_MWE_SHF 9
+#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200
+#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200
+#define MSC01_PCI_INTSTAT_DTO_SHF 8
+#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100
+#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100
+#define MSC01_PCI_INTSTAT_MA_SHF 7
+#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080
+#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080
+#define MSC01_PCI_INTSTAT_TA_SHF 6
+#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040
+#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040
+#define MSC01_PCI_INTSTAT_RTY_SHF 5
+#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020
+#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020
+#define MSC01_PCI_INTSTAT_MWP_SHF 4
+#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010
+#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010
+#define MSC01_PCI_INTSTAT_MRP_SHF 3
+#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008
+#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008
+#define MSC01_PCI_INTSTAT_SWP_SHF 2
+#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004
+#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004
+#define MSC01_PCI_INTSTAT_SRP_SHF 1
+#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002
+#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002
+#define MSC01_PCI_INTSTAT_SE_SHF 0
+#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001
+#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001
#define MSC01_PCI_CFGADDR_BNUM_SHF 16
#define MSC01_PCI_CFGADDR_BNUM_MSK 0x00ff0000
@@ -167,29 +168,29 @@
#define MSC01_PCI_CFGDATA_DATA_MSK 0xffffffff
/* The defines below are ONLY valid for a MEM bar! */
-#define MSC01_PCI_BAR0_SIZE_SHF 4
-#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0
-#define MSC01_PCI_BAR0_P_SHF 3
-#define MSC01_PCI_BAR0_P_MSK 0x00000008
-#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK
-#define MSC01_PCI_BAR0_D_SHF 1
-#define MSC01_PCI_BAR0_D_MSK 0x00000006
-#define MSC01_PCI_BAR0_T_SHF 0
-#define MSC01_PCI_BAR0_T_MSK 0x00000001
-#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK
+#define MSC01_PCI_BAR0_SIZE_SHF 4
+#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0
+#define MSC01_PCI_BAR0_P_SHF 3
+#define MSC01_PCI_BAR0_P_MSK 0x00000008
+#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK
+#define MSC01_PCI_BAR0_D_SHF 1
+#define MSC01_PCI_BAR0_D_MSK 0x00000006
+#define MSC01_PCI_BAR0_T_SHF 0
+#define MSC01_PCI_BAR0_T_MSK 0x00000001
+#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK
-#define MSC01_PCI_CFG_RA_SHF 17
-#define MSC01_PCI_CFG_RA_MSK 0x00020000
-#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK
-#define MSC01_PCI_CFG_G_SHF 16
-#define MSC01_PCI_CFG_G_MSK 0x00010000
-#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK
-#define MSC01_PCI_CFG_EN_SHF 15
-#define MSC01_PCI_CFG_EN_MSK 0x00008000
-#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK
-#define MSC01_PCI_CFG_MAXRTRY_SHF 0
-#define MSC01_PCI_CFG_MAXRTRY_MSK 0x000000ff
+#define MSC01_PCI_CFG_RA_SHF 17
+#define MSC01_PCI_CFG_RA_MSK 0x00020000
+#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK
+#define MSC01_PCI_CFG_G_SHF 16
+#define MSC01_PCI_CFG_G_MSK 0x00010000
+#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK
+#define MSC01_PCI_CFG_EN_SHF 15
+#define MSC01_PCI_CFG_EN_MSK 0x00008000
+#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK
+#define MSC01_PCI_CFG_MAXRTRY_SHF 0
+#define MSC01_PCI_CFG_MAXRTRY_MSK 0x00000fff
#define MSC01_PCI_SWAP_IO_SHF 18
#define MSC01_PCI_SWAP_IO_MSK 0x000c0000
@@ -206,7 +207,7 @@
* FIXME - are these macros specific to Malta and co or to the MSC? If the
* latter, they should be moved elsewhere.
*/
-#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000
+#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000
extern unsigned long _pcictrl_msc;
@@ -219,19 +220,19 @@
* Registers absolute addresses
*/
-#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS)
-#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS)
-#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS)
-#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS)
-#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS)
-#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS)
-#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS)
-#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS)
-#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS)
-#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS)
-#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS)
-#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS)
-#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS)
+#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS)
+#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS)
+#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS)
+#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS)
+#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS)
+#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS)
+#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS)
+#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS)
+#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS)
+#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS)
+#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS)
+#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS)
+#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS)
#define MSC01_PCI_IACK (MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS)
#define MSC01_PCI_HEAD0 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS)
#define MSC01_PCI_HEAD1 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS)
@@ -248,7 +249,7 @@
#define MSC01_PCI_HEAD12 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
#define MSC01_PCI_HEAD13 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
#define MSC01_PCI_HEAD14 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
-#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
#define MSC01_PCI_BAR0 (MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS)
#define MSC01_PCI_CFG (MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS)
#define MSC01_PCI_SWAP (MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS)
diff --git a/include/asm-mips/mips-boards/sim.h b/include/asm-mips/mips-boards/sim.h
new file mode 100644
index 0000000..acb7c23
--- /dev/null
+++ b/include/asm-mips/mips-boards/sim.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_MIPS_BOARDS_SIM_H
+#define _ASM_MIPS_BOARDS_SIM_H
+
+#define STATS_ON 1
+#define STATS_OFF 2
+#define STATS_CLEAR 3
+#define STATS_DUMP 4
+#define TRACE_ON 5
+#define TRACE_OFF 6
+
+
+#define simcfg(code) \
+({ \
+ __asm__ __volatile__( \
+ "sltiu $0,$0, %0" \
+ ::"i"(code) \
+ ); \
+})
+
+
+
+#endif
diff --git a/include/asm-mips/mips-boards/simint.h b/include/asm-mips/mips-boards/simint.h
new file mode 100644
index 0000000..4952e0b
--- /dev/null
+++ b/include/asm-mips/mips-boards/simint.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _MIPS_SIMINT_H
+#define _MIPS_SIMINT_H
+
+
+#define SIM_INT_BASE 0
+#define MIPSCPU_INT_MB0 2
+#define MIPSCPU_INT_BASE 16
+#define MIPS_CPU_TIMER_IRQ 7
+
+
+#define MIPSCPU_INT_CPUCTR 7
+
+#define MSC01E_INT_BASE 64
+
+#define MIPSCPU_INT_CPUCTR 7
+#define MSC01E_INT_CPUCTR 11
+
+#endif
diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
new file mode 100644
index 0000000..a669c07
--- /dev/null
+++ b/include/asm-mips/mipsmtregs.h
@@ -0,0 +1,391 @@
+/*
+ * MT regs definitions, follows on from mipsregs.h
+ * Copyright (C) 2004 - 2005 MIPS Technologies, Inc. All rights reserved.
+ * Elizabeth Clarke et. al.
+ *
+ */
+#ifndef _ASM_MIPSMTREGS_H
+#define _ASM_MIPSMTREGS_H
+
+#include <asm/mipsregs.h>
+#include <asm/war.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#define read_c0_mvpcontrol() __read_32bit_c0_register($0, 1)
+#define write_c0_mvpcontrol(val) __write_32bit_c0_register($0, 1, val)
+
+#define read_c0_mvpconf0() __read_32bit_c0_register($0, 2)
+#define read_c0_mvpconf1() __read_32bit_c0_register($0, 3)
+
+#define read_c0_vpecontrol() __read_32bit_c0_register($1, 1)
+#define write_c0_vpecontrol(val) __write_32bit_c0_register($1, 1, val)
+
+#define read_c0_vpeconf0() __read_32bit_c0_register($1, 2)
+#define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val)
+
+#define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
+#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
+
+#define read_c0_tcbind() __read_32bit_c0_register($2, 2)
+
+#define read_c0_tccontext() __read_32bit_c0_register($2, 5)
+#define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val)
+
+#else /* Assembly */
+/*
+ * Macros for use in assembly language code
+ */
+
+#define CP0_MVPCONTROL $0,1
+#define CP0_MVPCONF0 $0,2
+#define CP0_MVPCONF1 $0,3
+#define CP0_VPECONTROL $1,1
+#define CP0_VPECONF0 $1,2
+#define CP0_VPECONF1 $1,3
+#define CP0_YQMASK $1,4
+#define CP0_VPESCHEDULE $1,5
+#define CP0_VPESCHEFBK $1,6
+#define CP0_TCSTATUS $2,1
+#define CP0_TCBIND $2,2
+#define CP0_TCRESTART $2,3
+#define CP0_TCHALT $2,4
+#define CP0_TCCONTEXT $2,5
+#define CP0_TCSCHEDULE $2,6
+#define CP0_TCSCHEFBK $2,7
+#define CP0_SRSCONF0 $6,1
+#define CP0_SRSCONF1 $6,2
+#define CP0_SRSCONF2 $6,3
+#define CP0_SRSCONF3 $6,4
+#define CP0_SRSCONF4 $6,5
+
+#endif
+
+/* MVPControl fields */
+#define MVPCONTROL_EVP (_ULCAST_(1))
+
+#define MVPCONTROL_VPC_SHIFT 1
+#define MVPCONTROL_VPC (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
+
+#define MVPCONTROL_STLB_SHIFT 2
+#define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
+
+/* MVPConf0 fields */
+#define MVPCONF0_PTC_SHIFT 0
+#define MVPCONF0_PTC ( _ULCAST_(0xff))
+#define MVPCONF0_PVPE_SHIFT 10
+#define MVPCONF0_PVPE ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
+#define MVPCONF0_TCA_SHIFT 15
+#define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+#define MVPCONF0_PTLBE_SHIFT 16
+#define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
+#define MVPCONF0_TLBS_SHIFT 29
+#define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+#define MVPCONF0_M_SHIFT 31
+#define MVPCONF0_M (_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
+
+
+/* config3 fields */
+#define CONFIG3_MT_SHIFT 2
+#define CONFIG3_MT (_ULCAST_(1) << CONFIG3_MT_SHIFT)
+
+
+/* VPEControl fields (per VPE) */
+#define VPECONTROL_TARGTC (_ULCAST_(0xff))
+
+#define VPECONTROL_TE_SHIFT 15
+#define VPECONTROL_TE (_ULCAST_(1) << VPECONTROL_TE_SHIFT)
+#define VPECONTROL_EXCPT_SHIFT 16
+#define VPECONTROL_EXCPT (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
+
+/* Thread Exception Codes for EXCPT field */
+#define THREX_TU 0
+#define THREX_TO 1
+#define THREX_IYQ 2
+#define THREX_GSX 3
+#define THREX_YSCH 4
+#define THREX_GSSCH 5
+
+#define VPECONTROL_GSI_SHIFT 20
+#define VPECONTROL_GSI (_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
+#define VPECONTROL_YSI_SHIFT 21
+#define VPECONTROL_YSI (_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
+
+/* VPEConf0 fields (per VPE) */
+#define VPECONF0_VPA_SHIFT 0
+#define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+#define VPECONF0_MVP_SHIFT 1
+#define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT)
+#define VPECONF0_XTC_SHIFT 21
+#define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
+/* TCStatus fields (per TC) */
+#define TCSTATUS_TASID (_ULCAST_(0xff))
+#define TCSTATUS_IXMT_SHIFT 10
+#define TCSTATUS_IXMT (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
+#define TCSTATUS_TKSU_SHIFT 11
+#define TCSTATUS_TKSU (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
+#define TCSTATUS_A_SHIFT 13
+#define TCSTATUS_A (_ULCAST_(1) << TCSTATUS_A_SHIFT)
+#define TCSTATUS_DA_SHIFT 15
+#define TCSTATUS_DA (_ULCAST_(1) << TCSTATUS_DA_SHIFT)
+#define TCSTATUS_DT_SHIFT 20
+#define TCSTATUS_DT (_ULCAST_(1) << TCSTATUS_DT_SHIFT)
+#define TCSTATUS_TDS_SHIFT 21
+#define TCSTATUS_TDS (_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
+#define TCSTATUS_TSST_SHIFT 22
+#define TCSTATUS_TSST (_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
+#define TCSTATUS_RNST_SHIFT 23
+#define TCSTATUS_RNST (_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
+/* Codes for RNST */
+#define TC_RUNNING 0
+#define TC_WAITING 1
+#define TC_YIELDING 2
+#define TC_GATED 3
+
+#define TCSTATUS_TMX_SHIFT 27
+#define TCSTATUS_TMX (_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
+/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */
+
+/* TCBind */
+#define TCBIND_CURVPE_SHIFT 0
+#define TCBIND_CURVPE (_ULCAST_(0xf))
+
+#define TCBIND_CURTC_SHIFT 21
+
+#define TCBIND_CURTC (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
+
+/* TCHalt */
+#define TCHALT_H (_ULCAST_(1))
+
+#ifndef __ASSEMBLY__
+
+extern void mips_mt_regdump(void);
+
+static inline unsigned int dvpe(void)
+{
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+static inline void __raw_evpe(void)
+{
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+}
+
+/* Enable multiMT if previous suggested it should be.
+ EMT_ENABLE to force */
+
+#define EVPE_ENABLE MVPCONTROL_EVP
+
+static inline void evpe(int previous)
+{
+ if ((previous & MVPCONTROL_EVP))
+ __raw_evpe();
+}
+
+static inline unsigned int dmt(void)
+{
+ int res;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips32r2 \n"
+ " .set noat \n"
+ " .word 0x41610BC1 # dmt $1 \n"
+ " ehb \n"
+ " move %0, $1 \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+static inline void __raw_emt(void)
+{
+ __asm__ __volatile__(
+ " .set noreorder \n"
+ " .set mips32r2 \n"
+ " emt \n"
+ " ehb \n"
+ " .set mips0 \n"
+ " .set reorder");
+}
+
+/* enable multiVPE if previous suggested it should be.
+ EVPE_ENABLE to force */
+
+#define EMT_ENABLE VPECONTROL_TE
+
+static inline void emt(int previous)
+{
+ if ((previous & EMT_ENABLE))
+ __raw_emt();
+}
+
+static inline void ehb(void)
+{
+ __asm__ __volatile__(
+ " .set mips32r2 \n"
+ " ehb \n"
+ " .set mips0 \n");
+}
+
+#define mftc0(rt,sel) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " # mftc0 $1, $" #rt ", " #sel " \n" \
+ " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mftgpr(rt) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " mftgpr %0," #rt " \n" \
+ " .set pop \n" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mftr(rt,u,sel) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ ".set noat\n\t" \
+ "mftr\t%0, " #rt ", " #u ", " #sel "\n\t" \
+ ".set at\n\t" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mttgpr(rd,v) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mttgpr $1, " #rd " \n" \
+ " .word 0x41810020 | (" #rd " << 11) \n" \
+ " .set pop \n" \
+ : : "r" (v)); \
+} while (0)
+
+#define mttc0(rd,sel,v) \
+({ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mttc0 %0," #rd ", " #sel " \n" \
+ " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \
+ " .set pop \n" \
+ : \
+ : "r" (v)); \
+})
+
+
+#define mttr(rd,u,sel,v) \
+({ \
+ __asm__ __volatile__( \
+ "mttr %0," #rd ", " #u ", " #sel \
+ : : "r" (v)); \
+})
+
+
+#define settc(tc) \
+do { \
+ write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
+ ehb(); \
+} while (0)
+
+
+/* you *must* set the target tc (settc) before trying to use these */
+#define read_vpe_c0_vpecontrol() mftc0(1, 1)
+#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val)
+#define read_vpe_c0_vpeconf0() mftc0(1, 2)
+#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
+#define read_vpe_c0_status() mftc0(12, 0)
+#define write_vpe_c0_status(val) mttc0(12, 0, val)
+#define read_vpe_c0_cause() mftc0(13, 0)
+#define write_vpe_c0_cause(val) mttc0(13, 0, val)
+#define read_vpe_c0_config() mftc0(16, 0)
+#define write_vpe_c0_config(val) mttc0(16, 0, val)
+#define read_vpe_c0_config1() mftc0(16, 1)
+#define write_vpe_c0_config1(val) mttc0(16, 1, val)
+#define read_vpe_c0_config7() mftc0(16, 7)
+#define write_vpe_c0_config7(val) mttc0(16, 7, val)
+#define read_vpe_c0_ebase() mftc0(15,1)
+#define write_vpe_c0_ebase(val) mttc0(15, 1, val)
+#define write_vpe_c0_compare(val) mttc0(11, 0, val)
+
+
+/* TC */
+#define read_tc_c0_tcstatus() mftc0(2, 1)
+#define write_tc_c0_tcstatus(val) mttc0(2,1,val)
+#define read_tc_c0_tcbind() mftc0(2, 2)
+#define write_tc_c0_tcbind(val) mttc0(2,2,val)
+#define read_tc_c0_tcrestart() mftc0(2, 3)
+#define write_tc_c0_tcrestart(val) mttc0(2,3,val)
+#define read_tc_c0_tchalt() mftc0(2, 4)
+#define write_tc_c0_tchalt(val) mttc0(2,4,val)
+#define read_tc_c0_tccontext() mftc0(2, 5)
+#define write_tc_c0_tccontext(val) mttc0(2,5,val)
+
+/* GPR */
+#define read_tc_gpr_sp() mftgpr(29)
+#define write_tc_gpr_sp(val) mttgpr(29, val)
+#define read_tc_gpr_gp() mftgpr(28)
+#define write_tc_gpr_gp(val) mttgpr(28, val)
+
+__BUILD_SET_C0(mvpcontrol)
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 2197aa4..80370e0 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -8,7 +8,7 @@
* Modified for further R[236]000 support by Paul M. Antoine, 1996.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
*/
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H
@@ -96,6 +96,16 @@
#define CP0_S1_INTCONTROL $20
/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL $12 /* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP $12 /* MIPSR2 */
+
+/*
* TX39 Series
*/
#define CP0_TX39_CACHE $7
@@ -281,6 +291,11 @@
#define ST0_DL (_ULCAST_(1) << 24)
/*
+ * Enable the MIPS DSP ASE
+ */
+#define ST0_MX 0x01000000
+
+/*
* Bitfields in the TX39 family CP0 Configuration Register 3
*/
#define TX39_CONF_ICS_SHIFT 19
@@ -433,6 +448,14 @@
#define R5K_CONF_SE (_ULCAST_(1) << 12)
#define R5K_CONF_SS (_ULCAST_(3) << 20)
+/* Bits specific to the RM7000. */
+#define RM7K_CONF_SE (_ULCAST_(1) << 3)
+#define RM7K_CONF_TE (_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
+#define RM7K_CONF_TC (_ULCAST_(1) << 17)
+#define RM7K_CONF_SI (_ULCAST_(3) << 20)
+#define RM7K_CONF_SC (_ULCAST_(1) << 31)
+
/* Bits specific to the R10000. */
#define R10K_CONF_DN (_ULCAST_(3) << 3)
#define R10K_CONF_CT (_ULCAST_(1) << 5)
@@ -475,6 +498,53 @@
#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
+#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
+#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
+#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
+#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
+#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
+#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
+#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
+#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
+#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
+#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
+#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
+#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
+#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S (_ULCAST_(1) << 16)
+#define MIPS_FPIR_D (_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
+#define MIPS_FPIR_W (_ULCAST_(1) << 20)
+#define MIPS_FPIR_L (_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+
+/*
* R10000 performance counter definitions.
*
* FIXME: The R10000 performance counter opens a nice way to implement CPU
@@ -621,13 +691,13 @@
if (sel == 0) \
__asm__ __volatile__( \
"mtc0\t%z0, " #register "\n\t" \
- : : "Jr" ((unsigned int)value)); \
+ : : "Jr" ((unsigned int)(value))); \
else \
__asm__ __volatile__( \
".set\tmips32\n\t" \
"mtc0\t%z0, " #register ", " #sel "\n\t" \
".set\tmips0" \
- : : "Jr" ((unsigned int)value)); \
+ : : "Jr" ((unsigned int)(value))); \
} while (0)
#define __write_64bit_c0_register(register, sel, value) \
@@ -676,7 +746,7 @@
do { \
__asm__ __volatile__( \
"ctc0\t%z0, " #register "\n\t" \
- : : "Jr" ((unsigned int)value)); \
+ : : "Jr" ((unsigned int)(value))); \
} while (0)
/*
@@ -769,12 +839,24 @@
#define read_c0_count() __read_32bit_c0_register($9, 0)
#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
+#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
+
#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
#define read_c0_compare() __read_32bit_c0_register($11, 0)
#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
+#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
+
#define read_c0_status() __read_32bit_c0_register($12, 0)
#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
@@ -790,10 +872,18 @@
#define read_c0_config1() __read_32bit_c0_register($16, 1)
#define read_c0_config2() __read_32bit_c0_register($16, 2)
#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
/*
* The WatchLo register. There may be upto 8 of them.
@@ -917,6 +1007,22 @@
#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
+/* MIPSR2 */
+#define read_c0_hwrena() __read_32bit_c0_register($7,0)
+#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl() __read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase() __read_32bit_c0_register($15,1)
+#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
+
/*
* Macros to access the floating point coprocessor control registers
*/
@@ -930,6 +1036,284 @@
: "=r" (__res)); \
__res;})
+#define rddsp(mask) \
+({ \
+ unsigned int __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # rddsp $1, %x1 \n" \
+ " .word 0x7c000cb8 | (%x1 << 16) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res) \
+ : "i" (mask)); \
+ __res; \
+})
+
+#define wrdsp(val, mask) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # wrdsp $1, %x1 \n" \
+ " .word 0x7c2004f8 | (%x1 << 15) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (val), "i" (mask)); \
+} while (0)
+
+#if 0 /* Need DSP ASE capable assembler ... */
+#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
+#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
+#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
+#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
+
+#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
+#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
+#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
+#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
+
+#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
+#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
+#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
+#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
+
+#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
+#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
+#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
+#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+
+#else
+
+#define mfhi0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac0 \n" \
+ " .word 0x00000810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac1 \n" \
+ " .word 0x00200810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac2 \n" \
+ " .word 0x00400810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac3 \n" \
+ " .word 0x00600810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac0 \n" \
+ " .word 0x00000812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac1 \n" \
+ " .word 0x00200812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac2 \n" \
+ " .word 0x00400812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac3 \n" \
+ " .word 0x00600812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mthi0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac0 \n" \
+ " .word 0x00200011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac1 \n" \
+ " .word 0x00200811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac2 \n" \
+ " .word 0x00201011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac3 \n" \
+ " .word 0x00201811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac0 \n" \
+ " .word 0x00200013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac1 \n" \
+ " .word 0x00200813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac2 \n" \
+ " .word 0x00201013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac3 \n" \
+ " .word 0x00201813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#endif
+
/*
* TLB operations.
*
@@ -1012,6 +1396,8 @@
__BUILD_SET_C0(cause)
__BUILD_SET_C0(config)
__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-mips/mmu_context.h b/include/asm-mips/mmu_context.h
index 45cd72d..19cdf76 100644
--- a/include/asm-mips/mmu_context.h
+++ b/include/asm-mips/mmu_context.h
@@ -30,7 +30,7 @@
#ifdef CONFIG_32BIT
#define TLBMISS_HANDLER_SETUP() \
- write_c0_context((unsigned long) smp_processor_id() << 23); \
+ write_c0_context((unsigned long) smp_processor_id() << 25); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
@@ -40,7 +40,7 @@
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
#define TLBMISS_HANDLER_SETUP() \
- write_c0_context((unsigned long) smp_processor_id() << 23); \
+ write_c0_context((unsigned long) smp_processor_id() << 26); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
diff --git a/include/asm-mips/mmzone.h b/include/asm-mips/mmzone.h
index d721143..011caeb 100644
--- a/include/asm-mips/mmzone.h
+++ b/include/asm-mips/mmzone.h
@@ -5,6 +5,7 @@
#ifndef _ASM_MMZONE_H_
#define _ASM_MMZONE_H_
+#include <linux/config.h>
#include <asm/page.h>
#include <mmzone.h>
diff --git a/include/asm-mips/module.h b/include/asm-mips/module.h
index 0be58b2..2be3993 100644
--- a/include/asm-mips/module.h
+++ b/include/asm-mips/module.h
@@ -14,15 +14,23 @@
typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */
-typedef struct
-{
- Elf64_Addr r_offset; /* Address of relocation. */
- Elf64_Word r_sym; /* Symbol index. */
- Elf64_Byte r_ssym; /* Special symbol. */
- Elf64_Byte r_type3; /* Third relocation. */
- Elf64_Byte r_type2; /* Second relocation. */
- Elf64_Byte r_type; /* First relocation. */
- Elf64_Sxword r_addend; /* Addend. */
+typedef struct {
+ Elf64_Addr r_offset; /* Address of relocation. */
+ Elf64_Word r_sym; /* Symbol index. */
+ Elf64_Byte r_ssym; /* Special symbol. */
+ Elf64_Byte r_type3; /* Third relocation. */
+ Elf64_Byte r_type2; /* Second relocation. */
+ Elf64_Byte r_type; /* First relocation. */
+} Elf64_Mips_Rel;
+
+typedef struct {
+ Elf64_Addr r_offset; /* Address of relocation. */
+ Elf64_Word r_sym; /* Symbol index. */
+ Elf64_Byte r_ssym; /* Special symbol. */
+ Elf64_Byte r_type3; /* Third relocation. */
+ Elf64_Byte r_type2; /* Second relocation. */
+ Elf64_Byte r_type; /* First relocation. */
+ Elf64_Sxword r_addend; /* Addend. */
} Elf64_Mips_Rela;
#ifdef CONFIG_32BIT
@@ -30,6 +38,13 @@
#define Elf_Shdr Elf32_Shdr
#define Elf_Sym Elf32_Sym
#define Elf_Ehdr Elf32_Ehdr
+#define Elf_Addr Elf32_Addr
+
+#define Elf_Mips_Rel Elf32_Rel
+#define Elf_Mips_Rela Elf32_Rela
+
+#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info)
+#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info)
#endif
@@ -38,6 +53,13 @@
#define Elf_Shdr Elf64_Shdr
#define Elf_Sym Elf64_Sym
#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Addr Elf64_Addr
+
+#define Elf_Mips_Rel Elf64_Mips_Rel
+#define Elf_Mips_Rela Elf64_Mips_Rela
+
+#define ELF_MIPS_R_SYM(rel) (rel.r_sym)
+#define ELF_MIPS_R_TYPE(rel) (rel.r_type)
#endif
@@ -53,4 +75,54 @@
}
#endif
+#ifdef CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1"
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2"
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1"
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2"
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000"
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX"
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX"
+#elif defined CONFIG_CPU_R4300
+#define MODULE_PROC_FAMILY "R4300"
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00"
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX"
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000"
+#elif defined CONFIG_CPU_R5432
+#define MODULE_PROC_FAMILY "R5432"
+#elif defined CONFIG_CPU_R6000
+#define MODULE_PROC_FAMILY "R6000"
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA"
+#elif defined CONFIG_CPU_R8000
+#define MODULE_PROC_FAMILY "R8000"
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000"
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000"
+#elif defined CONFIG_CPU_RM9000
+#define MODULE_PROC_FAMILY "RM9000"
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1"
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
+
#endif /* _ASM_MODULE_H */
diff --git a/include/asm-mips/paccess.h b/include/asm-mips/paccess.h
index 309bc30..46f2d23 100644
--- a/include/asm-mips/paccess.h
+++ b/include/asm-mips/paccess.h
@@ -52,7 +52,7 @@
})
#define __get_dbe_asm(insn) \
-({ \
+{ \
__asm__ __volatile__( \
"1:\t" insn "\t%1,%2\n\t" \
"move\t%0,$0\n" \
@@ -67,7 +67,7 @@
".previous" \
:"=r" (__gu_err), "=r" (__gu_val) \
:"o" (__mp(__gu_addr)), "i" (-EFAULT)); \
-})
+}
extern void __get_dbe_unknown(void);
@@ -90,7 +90,7 @@
})
#define __put_dbe_asm(insn) \
-({ \
+{ \
__asm__ __volatile__( \
"1:\t" insn "\t%1,%2\n\t" \
"move\t%0,$0\n" \
@@ -104,7 +104,7 @@
".previous" \
: "=r" (__pu_err) \
: "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT)); \
-})
+}
extern void __put_dbe_unknown(void);
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index 652b6d6..ee25a77 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -87,22 +87,48 @@
typedef struct { unsigned long pte; } pte_t;
#define pte_val(x) ((x).pte)
#endif
+#define __pte(x) ((pte_t) { (x) } )
+
+/*
+ * For 3-level pagetables we defines these ourselves, for 2-level the
+ * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
+ */
+#ifdef CONFIG_64BIT
typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
#define pmd_val(x) ((x).pmd)
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t)))
-
-#define __pte(x) ((pte_t) { (x) } )
#define __pmd(x) ((pmd_t) { (x) } )
+
+#endif
+
+/*
+ * Right now we don't support 4-level pagetables, so all pud-related
+ * definitions come from <asm-generic/pgtable-nopud.h>.
+ */
+
+/*
+ * Finall the top of the hierarchy, the pgd
+ */
+typedef struct { unsigned long pgd; } pgd_t;
+#define pgd_val(x) ((x).pgd)
#define __pgd(x) ((pgd_t) { (x) } )
+
+/*
+ * Manipulate page protection bits
+ */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x) ((x).pgprot)
#define __pgprot(x) ((pgprot_t) { (x) } )
+/*
+ * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd
+ * pair of pages we only have a single global bit per pair of pages. When
+ * writing to the TLB make sure we always have the bit set for both pages
+ * or none. This macro is used to access the `buddy' of the pte we're just
+ * working on.
+ */
+#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t)))
+
#endif /* !__ASSEMBLY__ */
/* to align the pointer to the (next) page boundary */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index c9a00ca..6c9ad81 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -40,6 +40,11 @@
unsigned int need_domain_info;
int iommu;
+
+ /* Optional access methods for reading/writing the bus number
+ of the PCI controller */
+ int (*get_busno)(void);
+ void (*set_busno)(int busno);
};
/*
@@ -142,8 +147,22 @@
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res);
-extern void pcibios_bus_to_resource(struct pci_dev *dev,
- struct resource *res, struct pci_bus_region *region);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
#ifdef CONFIG_PCI_DOMAINS
@@ -169,17 +188,4 @@
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
- struct resource *root = NULL;
-
- if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
-
- return root;
-}
-
#endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/pgalloc.h b/include/asm-mips/pgalloc.h
index ce57288..fe1df57 100644
--- a/include/asm-mips/pgalloc.h
+++ b/include/asm-mips/pgalloc.h
@@ -26,10 +26,22 @@
}
/*
+ * Initialize a new pmd table with invalid pointers.
+ */
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+#ifdef CONFIG_64BIT
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+ set_pud(pud, __pud((unsigned long)pmd));
+}
+#endif
+
+/*
* Initialize a new pgd / pmd table with invalid pointers.
*/
extern void pgd_init(unsigned long page);
-extern void pmd_init(unsigned long page, unsigned long pagetable);
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
@@ -86,21 +98,18 @@
#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
#ifdef CONFIG_32BIT
-#define pgd_populate(mm, pmd, pte) BUG()
/*
* allocating and freeing a pmd is trivial: the 1-entry pmd is
* inside the pgd, so has no extra memory associated with it.
*/
-#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); })
#define pmd_free(x) do { } while (0)
#define __pmd_free_tlb(tlb,x) do { } while (0)
+
#endif
#ifdef CONFIG_64BIT
-#define pgd_populate(mm, pgd, pmd) set_pgd(pgd, __pgd(pmd))
-
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
{
pmd_t *pmd;
diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h
index 7fec93b..0cff64c 100644
--- a/include/asm-mips/pgtable-32.h
+++ b/include/asm-mips/pgtable-32.h
@@ -17,6 +17,8 @@
#include <asm/cachectl.h>
#include <asm/fixmap.h>
+#include <asm-generic/pgtable-nopmd.h>
+
/*
* - add_wired_entry() add a fixed TLB entry, and move wired register
*/
@@ -41,42 +43,38 @@
* works even with the cache aliasing problem the R4k and above have.
*/
-/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#ifdef CONFIG_64BIT_PHYS_ADDR
-#define PMD_SHIFT 21
-#else
-#define PMD_SHIFT 22
-#endif
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT PMD_SHIFT
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define PGDIR_SHIFT 21
+#else
+#define PGDIR_SHIFT 22
+#endif
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
* Entries per page directory level: we use two-level, so
- * we don't really have any PMD directory physically.
+ * we don't really have any PUD/PMD directory physically.
*/
#ifdef CONFIG_64BIT_PHYS_ADDR
#define PGD_ORDER 1
-#define PMD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 1
#define PTE_ORDER 0
#else
#define PGD_ORDER 0
-#define PMD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 1
#define PTE_ORDER 0
#endif
#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
-#define PTRS_PER_PMD 1
#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
-#define VMALLOC_START KSEG2
+#define VMALLOC_START MAP_BASE
#ifdef CONFIG_HIGHMEM
# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE)
@@ -91,8 +89,6 @@
#define pte_ERROR(e) \
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
#endif
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
@@ -120,17 +116,7 @@
pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
}
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd) { return 0; }
-static inline int pgd_bad(pgd_t pgd) { return 0; }
-static inline int pgd_present(pgd_t pgd) { return 1; }
-static inline void pgd_clear(pgd_t *pgdp) { }
-
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
static inline pte_t
@@ -151,27 +137,22 @@
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
#else
#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT))
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
#endif
-#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) */
#define __pgd_offset(address) pgd_index(address)
+#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
/* to find an entry in a page-table-directory */
#define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr))
-/* Find an entry in the second-level page table.. */
-static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
-{
- return (pmd_t *) dir;
-}
-
/* Find an entry in the third-level page table.. */
#define __pte_offset(address) \
(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
@@ -221,7 +202,7 @@
*/
#define PTE_FILE_MAX_BITS 27
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
/* fixme */
#define pte_to_pgoff(_pte) (((_pte).pte_high >> 6) + ((_pte).pte_high & 0x3f))
#define pgoff_to_pte(off) \
diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h
index 1011e06..82166b2 100644
--- a/include/asm-mips/pgtable-64.h
+++ b/include/asm-mips/pgtable-64.h
@@ -16,13 +16,15 @@
#include <asm/page.h>
#include <asm/cachectl.h>
+#include <asm-generic/pgtable-nopud.h>
+
/*
* Each address space has 2 4K pages as its page directory, giving 1024
* (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a
- * pair of 4K pages, giving 1024 (== PTRS_PER_PMD) 8 byte pointers to
- * page tables. Each page table is a single 4K page, giving 512 (==
- * PTRS_PER_PTE) 8 byte ptes. Each pgde is initialized to point to
- * invalid_pmd_table, each pmde is initialized to point to
+ * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page
+ * tables. Each page table is also a single 4K page, giving 512 (==
+ * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to
+ * invalid_pmd_table, each pmd entry is initialized to point to
* invalid_pte_table, each pte is initialized to 0. When memory is low,
* and a pmd table or a page table allocation fails, empty_bad_pmd_table
* and empty_bad_page_table is returned back to higher layer code, so
@@ -36,17 +38,17 @@
*/
/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT - 3))
+#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3))
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + 1 - 3))
+#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3))
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
- * For 4kB page size we use a 3 level page tree and a 8kB pmd and pgds which
+ * For 4kB page size we use a 3 level page tree and an 8kB pud, which
* permits us mapping 40 bits of virtual address space.
*
* We used to implement 41 bits by having an order 1 pmd level but that seemed
@@ -57,7 +59,7 @@
* two levels would be easy to implement.
*
* For 16kB page size we use a 2 level page tree which permits a total of
- * 36 bits of virtual address space. We could add a third leve. but it seems
+ * 36 bits of virtual address space. We could add a third level but it seems
* like at the moment there's no need for this.
*
* For 64kB page size we use a 2 level page table tree for a total of 42 bits
@@ -65,21 +67,25 @@
*/
#ifdef CONFIG_PAGE_SIZE_4KB
#define PGD_ORDER 1
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
#ifdef CONFIG_PAGE_SIZE_8KB
#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
#ifdef CONFIG_PAGE_SIZE_16KB
#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
@@ -91,7 +97,7 @@
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
-#define VMALLOC_START XKSEG
+#define VMALLOC_START MAP_BASE
#define VMALLOC_END \
(VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE)
@@ -102,13 +108,13 @@
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
-extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
-extern pte_t empty_bad_page_table[PAGE_SIZE/sizeof(pte_t)];
-extern pmd_t invalid_pmd_table[2*PAGE_SIZE/sizeof(pmd_t)];
-extern pmd_t empty_bad_pmd_table[2*PAGE_SIZE/sizeof(pmd_t)];
+extern pte_t invalid_pte_table[PTRS_PER_PTE];
+extern pte_t empty_bad_page_table[PTRS_PER_PTE];
+extern pmd_t invalid_pmd_table[PTRS_PER_PMD];
+extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD];
/*
- * Empty pmd entries point to the invalid_pte_table.
+ * Empty pgd/pmd entries point to the invalid_pte_table.
*/
static inline int pmd_none(pmd_t pmd)
{
@@ -128,26 +134,30 @@
}
/*
- * Empty pgd entries point to the invalid_pmd_table.
+ * Empty pud entries point to the invalid_pmd_table.
*/
-static inline int pgd_none(pgd_t pgd)
+static inline int pud_none(pud_t pud)
{
- return pgd_val(pgd) == (unsigned long) invalid_pmd_table;
+ return pud_val(pud) == (unsigned long) invalid_pmd_table;
}
-#define pgd_bad(pgd) (pgd_val(pgd) &~ PAGE_MASK)
-
-static inline int pgd_present(pgd_t pgd)
+static inline int pud_bad(pud_t pud)
{
- return pgd_val(pgd) != (unsigned long) invalid_pmd_table;
+ return pud_val(pud) & ~PAGE_MASK;
}
-static inline void pgd_clear(pgd_t *pgdp)
+static inline int pud_present(pud_t pud)
{
- pgd_val(*pgdp) = ((unsigned long) invalid_pmd_table);
+ return pud_val(pud) != (unsigned long) invalid_pmd_table;
}
-#define pte_page(x) pfn_to_page((unsigned long)((pte_val(x) >> PAGE_SHIFT)))
+static inline void pud_clear(pud_t *pudp)
+{
+ pud_val(*pudp) = ((unsigned long) invalid_pmd_table);
+}
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
#ifdef CONFIG_CPU_VR41XX
#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
@@ -157,26 +167,27 @@
#endif
#define __pgd_offset(address) pgd_index(address)
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
+#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address) pmd_index(address)
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, 0)
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
/* to find an entry in a page-table-directory */
#define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr))
-static inline unsigned long pgd_page(pgd_t pgd)
+static inline unsigned long pud_page(pud_t pud)
{
- return pgd_val(pgd);
+ return pud_val(pud);
}
/* Find an entry in the second-level page table.. */
-static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address)
+static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address)
{
- return (pmd_t *) pgd_page(*dir) +
- ((address >> PMD_SHIFT) & (PTRS_PER_PMD - 1));
+ return (pmd_t *) pud_page(*pud) + pmd_index(address);
}
/* Find an entry in the third-level page table.. */
diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h
index 3aad751..01e76e9 100644
--- a/include/asm-mips/pgtable-bits.h
+++ b/include/asm-mips/pgtable-bits.h
@@ -33,7 +33,7 @@
* unpredictable things. The code (when it is written) to deal with
* this problem will be in the update_mmu_cache() code for the r4k.
*/
-#if defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR)
#define _PAGE_PRESENT (1<<6) /* implemented in software */
#define _PAGE_READ (1<<7) /* implemented in software */
@@ -123,7 +123,7 @@
#endif
#endif
-#endif /* defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR) */
+#endif /* defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR) */
#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
@@ -140,7 +140,7 @@
#define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_COW
#endif
-#if defined(CONFIG_CPU_MIPS32) && defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR)
#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT >> 3)
#else
#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT >> 9)
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index eaf5d9b..34facd9 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -8,8 +8,6 @@
#ifndef _ASM_PGTABLE_H
#define _ASM_PGTABLE_H
-#include <asm-generic/4level-fixup.h>
-
#include <linux/config.h>
#ifdef CONFIG_32BIT
#include <asm/pgtable-32.h>
@@ -18,6 +16,7 @@
#include <asm/pgtable-64.h>
#endif
+#include <asm/io.h>
#include <asm/pgtable-bits.h>
#define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT)
@@ -76,7 +75,6 @@
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
#define pmd_phys(pmd) (pmd_val(pmd) - PAGE_OFFSET)
#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
#define pmd_page_kernel(pmd) pmd_val(pmd)
@@ -84,7 +82,7 @@
#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
static inline void set_pte(pte_t *ptep, pte_t pte)
{
ptep->pte_high = pte.pte_high;
@@ -148,11 +146,18 @@
#endif
/*
- * (pmds are folded into pgds so this doesn't get actually called,
+ * (pmds are folded into puds so this doesn't get actually called,
* but the define is needed for a generic inline function.)
*/
#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0)
-#define set_pgd(pgdptr, pgdval) do { *(pgdptr) = (pgdval); } while(0)
+
+#ifdef CONFIG_64BIT
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
+#endif
#define PGD_T_LOG2 ffz(~sizeof(pgd_t))
#define PMD_T_LOG2 ffz(~sizeof(pmd_t))
@@ -165,7 +170,7 @@
* Undefined behaviour if not..
*/
static inline int pte_user(pte_t pte) { BUG(); return 0; }
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
static inline int pte_read(pte_t pte) { return (pte).pte_low & _PAGE_READ; }
static inline int pte_write(pte_t pte) { return (pte).pte_low & _PAGE_WRITE; }
static inline int pte_dirty(pte_t pte) { return (pte).pte_low & _PAGE_MODIFIED; }
@@ -324,7 +329,7 @@
*/
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
pte.pte_low &= _PAGE_CHG_MASK;
@@ -357,7 +362,6 @@
#endif
#ifdef CONFIG_64BIT_PHYS_ADDR
-extern phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size);
extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
static inline int io_remap_pfn_range(struct vm_area_struct *vma,
@@ -367,7 +371,7 @@
pgprot_t prot)
{
phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
- return remap_pfn_range(vma, vaddr, pfn, size, prot);
+ return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
}
#else
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index d6466aa..f1980c6 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -96,12 +96,26 @@
{{0,},} \
}
+#define NUM_DSP_REGS 6
+
+typedef __u32 dspreg_t;
+
+struct mips_dsp_state {
+ dspreg_t dspr[NUM_DSP_REGS];
+ unsigned int dspcontrol;
+ unsigned short used_dsp;
+};
+
+#define INIT_DSP {{0,},}
+
typedef struct {
unsigned long seg;
} mm_segment_t;
#define ARCH_MIN_TASKALIGN 8
+struct mips_abi;
+
/*
* If you change thread_struct remember to change the #defines below too!
*/
@@ -117,6 +131,9 @@
/* Saved fpu/fpu emulator stuff. */
union mips_fpu_union fpu;
+ /* Saved state of the DSP ASE, if available. */
+ struct mips_dsp_state dsp;
+
/* Other stuff associated with the thread. */
unsigned long cp0_badvaddr; /* Last user fault */
unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */
@@ -129,6 +146,7 @@
unsigned long mflags;
unsigned long irix_trampoline; /* Wheee... */
unsigned long irix_oldctx;
+ struct mips_abi *abi;
};
#define MF_ABI_MASK (MF_32BIT_REGS | MF_32BIT_ADDR)
@@ -151,6 +169,10 @@
*/ \
INIT_FPU, \
/* \
+ * saved dsp/dsp emulator stuff \
+ */ \
+ INIT_DSP, \
+ /* \
* Other stuff associated with the process \
*/ \
0, 0, 0, 0, \
diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h
index 2b5c624..95c5839 100644
--- a/include/asm-mips/ptrace.h
+++ b/include/asm-mips/ptrace.h
@@ -22,6 +22,8 @@
#define MMLO 68
#define FPC_CSR 69
#define FPC_EIR 70
+#define DSP_BASE 71 /* 3 more hi / lo register pairs */
+#define DSP_CONTROL 77
/*
* This struct defines the way the registers are stored on the stack during a
@@ -38,18 +40,18 @@
/* Saved special registers. */
unsigned long cp0_status;
- unsigned long lo;
unsigned long hi;
+ unsigned long lo;
unsigned long cp0_badvaddr;
unsigned long cp0_cause;
unsigned long cp0_epc;
};
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-/* #define PTRACE_GETREGS 12 */
-/* #define PTRACE_SETREGS 13 */
-/* #define PTRACE_GETFPREGS 14 */
-/* #define PTRACE_SETFPREGS 15 */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
/* #define PTRACE_GETFPXREGS 18 */
/* #define PTRACE_SETFPXREGS 19 */
@@ -58,6 +60,13 @@
#define PTRACE_GET_THREAD_AREA 25
#define PTRACE_SET_THREAD_AREA 26
+/* Calls to trace a 64bit program from a 32bit program. */
+#define PTRACE_PEEKTEXT_3264 0xc0
+#define PTRACE_PEEKDATA_3264 0xc1
+#define PTRACE_POKETEXT_3264 0xc2
+#define PTRACE_POKEDATA_3264 0xc3
+#define PTRACE_GET_THREAD_AREA_3264 0xc4
+
#ifdef __KERNEL__
#include <linux/linkage.h>
diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h
index 5bea49f..a5ea9d8 100644
--- a/include/asm-mips/r4kcache.h
+++ b/include/asm-mips/r4kcache.h
@@ -21,7 +21,7 @@
*
* - The MIPS32 and MIPS64 specs permit an implementation to directly derive
* the index bits from the virtual address. This breaks with tradition
- * set by the R4000. To keep unpleassant surprises from happening we pick
+ * set by the R4000. To keep unpleasant surprises from happening we pick
* an address in KSEG0 / CKSEG0.
* - We need a properly sign extended address for 64-bit code. To get away
* without ifdefs we let the compiler do it by a type cast.
@@ -30,11 +30,11 @@
#define cache_op(op,addr) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3\n\t \n" \
" cache %0, %1 \n" \
- " .set mips0 \n" \
- " .set reorder" \
+ " .set pop \n" \
: \
: "i" (op), "m" (*(unsigned char *)(addr)))
@@ -84,14 +84,14 @@
static inline void protected_flush_icache_line(unsigned long addr)
{
__asm__ __volatile__(
- ".set noreorder\n\t"
- ".set mips3\n"
- "1:\tcache %0,(%1)\n"
- "2:\t.set mips0\n\t"
- ".set reorder\n\t"
- ".section\t__ex_table,\"a\"\n\t"
- STR(PTR)"\t1b,2b\n\t"
- ".previous"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: cache %0, (%1) \n"
+ "2: .set pop \n"
+ " .section __ex_table,\"a\" \n"
+ " "STR(PTR)" 1b, 2b \n"
+ " .previous"
:
: "i" (Hit_Invalidate_I), "r" (addr));
}
@@ -100,19 +100,19 @@
* R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D
* cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style
* caches. We're talking about one cacheline unnecessarily getting invalidated
- * here so the penaltiy isn't overly hard.
+ * here so the penalty isn't overly hard.
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
__asm__ __volatile__(
- ".set noreorder\n\t"
- ".set mips3\n"
- "1:\tcache %0,(%1)\n"
- "2:\t.set mips0\n\t"
- ".set reorder\n\t"
- ".section\t__ex_table,\"a\"\n\t"
- STR(PTR)"\t1b,2b\n\t"
- ".previous"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: cache %0, (%1) \n"
+ "2: .set pop \n"
+ " .section __ex_table,\"a\" \n"
+ " "STR(PTR)" 1b, 2b \n"
+ " .previous"
:
: "i" (Hit_Writeback_Inv_D), "r" (addr));
}
@@ -120,14 +120,14 @@
static inline void protected_writeback_scache_line(unsigned long addr)
{
__asm__ __volatile__(
- ".set noreorder\n\t"
- ".set mips3\n"
- "1:\tcache %0,(%1)\n"
- "2:\t.set mips0\n\t"
- ".set reorder\n\t"
- ".section\t__ex_table,\"a\"\n\t"
- STR(PTR)"\t1b,2b\n\t"
- ".previous"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: cache %0, (%1) \n"
+ "2: .set pop \n"
+ " .section __ex_table,\"a\" \n"
+ " "STR(PTR)" 1b, 2b \n"
+ " .previous"
:
: "i" (Hit_Writeback_Inv_SD), "r" (addr));
}
@@ -142,6 +142,7 @@
#define cache16_unroll32(base,op) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3 \n" \
" cache %1, 0x000(%0); cache %1, 0x010(%0) \n" \
@@ -160,8 +161,7 @@
" cache %1, 0x1a0(%0); cache %1, 0x1b0(%0) \n" \
" cache %1, 0x1c0(%0); cache %1, 0x1d0(%0) \n" \
" cache %1, 0x1e0(%0); cache %1, 0x1f0(%0) \n" \
- " .set mips0 \n" \
- " .set reorder \n" \
+ " .set pop \n" \
: \
: "r" (base), \
"i" (op));
@@ -285,6 +285,7 @@
#define cache32_unroll32(base,op) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3 \n" \
" cache %1, 0x000(%0); cache %1, 0x020(%0) \n" \
@@ -303,8 +304,7 @@
" cache %1, 0x340(%0); cache %1, 0x360(%0) \n" \
" cache %1, 0x380(%0); cache %1, 0x3a0(%0) \n" \
" cache %1, 0x3c0(%0); cache %1, 0x3e0(%0) \n" \
- " .set mips0 \n" \
- " .set reorder \n" \
+ " .set pop \n" \
: \
: "r" (base), \
"i" (op));
@@ -428,6 +428,7 @@
#define cache64_unroll32(base,op) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3 \n" \
" cache %1, 0x000(%0); cache %1, 0x040(%0) \n" \
@@ -446,8 +447,7 @@
" cache %1, 0x680(%0); cache %1, 0x6c0(%0) \n" \
" cache %1, 0x700(%0); cache %1, 0x740(%0) \n" \
" cache %1, 0x780(%0); cache %1, 0x7c0(%0) \n" \
- " .set mips0 \n" \
- " .set reorder \n" \
+ " .set pop \n" \
: \
: "r" (base), \
"i" (op));
@@ -532,6 +532,7 @@
#define cache128_unroll32(base,op) \
__asm__ __volatile__( \
+ " .set push \n" \
" .set noreorder \n" \
" .set mips3 \n" \
" cache %1, 0x000(%0); cache %1, 0x080(%0) \n" \
@@ -550,8 +551,7 @@
" cache %1, 0xd00(%0); cache %1, 0xd80(%0) \n" \
" cache %1, 0xe00(%0); cache %1, 0xe80(%0) \n" \
" cache %1, 0xf00(%0); cache %1, 0xf80(%0) \n" \
- " .set mips0 \n" \
- " .set reorder \n" \
+ " .set pop \n" \
: \
: "r" (base), \
"i" (op));
diff --git a/include/asm-mips/rtc.h b/include/asm-mips/rtc.h
index 3c4b637..a60e0dc 100644
--- a/include/asm-mips/rtc.h
+++ b/include/asm-mips/rtc.h
@@ -14,7 +14,9 @@
#ifdef __KERNEL__
+#include <linux/spinlock.h>
#include <linux/rtc.h>
+#include <asm/time.h>
#define RTC_PIE 0x40 /* periodic interrupt enable */
#define RTC_AIE 0x20 /* alarm interrupt enable */
@@ -27,11 +29,52 @@
#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
-unsigned int get_rtc_time(struct rtc_time *time);
-int set_rtc_time(struct rtc_time *time);
-unsigned int get_rtc_ss(void);
-int get_rtc_pll(struct rtc_pll_info *pll);
-int set_rtc_pll(struct rtc_pll_info *pll);
+static DEFINE_SPINLOCK(mips_rtc_lock);
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+ unsigned long nowtime;
+
+ spin_lock(&mips_rtc_lock);
+ nowtime = rtc_get_time();
+ to_tm(nowtime, time);
+ time->tm_year -= 1900;
+ spin_unlock(&mips_rtc_lock);
+
+ return RTC_24H;
+}
+
+static inline int set_rtc_time(struct rtc_time *time)
+{
+ unsigned long nowtime;
+ int ret;
+
+ spin_lock(&mips_rtc_lock);
+ nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
+ time->tm_mday, time->tm_hour, time->tm_min,
+ time->tm_sec);
+ ret = rtc_set_time(nowtime);
+ spin_unlock(&mips_rtc_lock);
+
+ return ret;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+ struct rtc_time h;
+
+ get_rtc_time(&h);
+ return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+ return -EINVAL;
+}
+
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+ return -EINVAL;
+}
#endif
#endif
diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h
new file mode 100644
index 0000000..83cdf6a
--- /dev/null
+++ b/include/asm-mips/rtlx.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ */
+
+#ifndef _RTLX_H
+#define _RTLX_H_
+
+#define LX_NODE_BASE 10
+
+#define MIPSCPU_INT_BASE 16
+#define MIPS_CPU_RTLX_IRQ 0
+
+#define RTLX_VERSION 1
+#define RTLX_xID 0x12345600
+#define RTLX_ID (RTLX_xID | RTLX_VERSION)
+#define RTLX_CHANNELS 8
+
+enum rtlx_state {
+ RTLX_STATE_UNUSED = 0,
+ RTLX_STATE_INITIALISED,
+ RTLX_STATE_REMOTE_READY,
+ RTLX_STATE_OPENED
+};
+
+#define RTLX_BUFFER_SIZE 1024
+/* each channel supports read and write.
+ linux (vpe0) reads lx_buffer and writes rt_buffer
+ SP (vpe1) reads rt_buffer and writes lx_buffer
+*/
+typedef struct rtlx_channel {
+ enum rtlx_state rt_state;
+ enum rtlx_state lx_state;
+
+ int buffer_size;
+
+ /* read and write indexes per buffer */
+ int rt_write, rt_read;
+ char *rt_buffer;
+
+ int lx_write, lx_read;
+ char *lx_buffer;
+
+ void *queues;
+
+} rtlx_channel_t;
+
+typedef struct rtlx_info {
+ unsigned long id;
+ enum rtlx_state state;
+
+ struct rtlx_channel channel[RTLX_CHANNELS];
+
+} rtlx_info_t;
+
+#endif
diff --git a/include/asm-mips/semaphore.h b/include/asm-mips/semaphore.h
index c2c97de..3d6aa7c 100644
--- a/include/asm-mips/semaphore.h
+++ b/include/asm-mips/semaphore.h
@@ -45,9 +45,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name, 1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 4eed8e2..e796d75 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -52,16 +52,6 @@
#define JAZZ_SERIAL_PORT_DEFNS
#endif
-#ifdef CONFIG_MIPS_COBALT
-#include <asm/cobalt/cobalt.h>
-#define COBALT_BASE_BAUD (18432000 / 16)
-#define COBALT_SERIAL_PORT_DEFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, COBALT_BASE_BAUD, 0xc800000, COBALT_SERIAL_IRQ, STD_COM_FLAGS }, /* ttyS0 */
-#else
-#define COBALT_SERIAL_PORT_DEFNS
-#endif
-
/*
* Both Galileo boards have the same UART mappings.
*/
@@ -113,17 +103,6 @@
#define IVR_SERIAL_PORT_DEFNS
#endif
-#ifdef CONFIG_TOSHIBA_JMR3927
-#include <asm/jmr3927/jmr3927.h>
-#define TXX927_SERIAL_PORT_DEFNS \
- { .baud_base = JMR3927_BASE_BAUD, .port = UART0_ADDR, .irq = UART0_INT, \
- .flags = UART0_FLAGS, .type = 1 }, \
- { .baud_base = JMR3927_BASE_BAUD, .port = UART1_ADDR, .irq = UART1_INT, \
- .flags = UART1_FLAGS, .type = 1 },
-#else
-#define TXX927_SERIAL_PORT_DEFNS
-#endif
-
#ifdef CONFIG_SERIAL_AU1X00
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_SOC_AU1000
@@ -227,9 +206,9 @@
#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L
#define _JAGUAR_ATX_SERIAL_INIT(int, base) \
- { baud_base: JAGUAR_ATX_BASE_BAUD, irq: int, \
- flags: (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
- iomem_base: (u8 *) base, iomem_reg_shift: 2, \
+ { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \
+ .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
+ .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
io_type: SERIAL_IO_MEM }
#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \
_JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
@@ -243,9 +222,9 @@
#define OCELOT_3_SERIAL_BASE (signed)0xfd000020
#define _OCELOT_3_SERIAL_INIT(int, base) \
- { baud_base: OCELOT_3_BASE_BAUD, irq: int, \
- flags: STD_COM_FLAGS, \
- iomem_base: (u8 *) base, iomem_reg_shift: 2, \
+ { .baud_base = OCELOT_3_BASE_BAUD, irq: int, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
io_type: SERIAL_IO_MEM }
#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \
@@ -342,7 +321,6 @@
#endif /* CONFIG_SGI_IP32 */
#define SERIAL_PORT_DFNS \
- COBALT_SERIAL_PORT_DEFNS \
DDB5477_SERIAL_PORT_DEFNS \
EV96100_SERIAL_PORT_DEFNS \
IP32_SERIAL_PORT_DEFNS \
@@ -354,7 +332,6 @@
MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \
- TXX927_SERIAL_PORT_DEFNS \
AU1000_SERIAL_PORT_DEFNS
#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h
index ac3dfc7..fcec52b 100644
--- a/include/asm-mips/sgi/hpc3.h
+++ b/include/asm-mips/sgi/hpc3.h
@@ -128,26 +128,26 @@
volatile u32 rx_gfptr; /* current GIO fifo ptr */
volatile u32 rx_dfptr; /* current device fifo ptr */
u32 _unused1; /* padding */
- volatile u32 rx_reset; /* reset register */
-#define HPC3_ERXRST_CRESET 0x1 /* Reset dma channel and external controller */
-#define HPC3_ERXRST_CLRIRQ 0x2 /* Clear channel interrupt */
-#define HPC3_ERXRST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
+ volatile u32 reset; /* reset register */
+#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */
+#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */
+#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
- volatile u32 rx_dconfig; /* DMA configuration register */
-#define HPC3_ERXDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
-#define HPC3_ERXDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
-#define HPC3_ERXDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
-#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
-#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
-#define HPC3_ERXDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
-#define HPC3_ERXDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
-#define HPC3_ERXDCFG_PTO 0x30000 /* Programmed timeout value for above two */
+ volatile u32 dconfig; /* DMA configuration register */
+#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */
- volatile u32 rx_pconfig; /* PIO configuration register */
-#define HPC3_ERXPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
-#define HPC3_ERXPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
-#define HPC3_ERXPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
-#define HPC3_ERXPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
+ volatile u32 pconfig; /* PIO configuration register */
+#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
u32 _unused2[0x1000/4 - 8]; /* padding */
diff --git a/include/asm-mips/sibyte/bcm1480_int.h b/include/asm-mips/sibyte/bcm1480_int.h
new file mode 100644
index 0000000..42d4cf0
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_int.h
@@ -0,0 +1,310 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * Interrupt Mapper definitions File: bcm1480_int.h
+ *
+ * This module contains constants for manipulating the
+ * BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and
+ * definitions for the interrupt sources.
+ *
+ * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_INT_H
+#define _BCM1480_INT_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Interrupt Mapper Constants
+ ********************************************************************* */
+
+/*
+ * The interrupt mapper deals with 128-bit logical registers that are
+ * implemented as pairs of 64-bit registers, with the "low" 64 bits in
+ * a register that has an address 0x1000 higher(!) than the
+ * corresponding "high" register.
+ *
+ * For appropriate registers, bit 0 of the "high" register is a
+ * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low"
+ * register.
+ */
+
+/*
+ * This entire file uses _BCM1480_ in all the symbols because it is
+ * entirely BCM1480 specific.
+ */
+
+/*
+ * Interrupt sources (Table 22)
+ */
+
+#define K_BCM1480_INT_SOURCES 128
+
+#define _BCM1480_INT_HIGH(k) (k)
+#define _BCM1480_INT_LOW(k) ((k)+64)
+
+#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1)
+#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4)
+#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5)
+#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6)
+#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7)
+#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8)
+#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9)
+#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10)
+#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11)
+#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12)
+#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13)
+#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14)
+#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15)
+#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20)
+#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21)
+#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22)
+#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23)
+#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28)
+#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29)
+#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30)
+#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31)
+#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36)
+#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37)
+#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38)
+#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39)
+#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40)
+#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41)
+#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42)
+#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43)
+#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52)
+#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53)
+#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54)
+#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55)
+#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56)
+#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57)
+#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58)
+#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59)
+#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60)
+#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61)
+#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62)
+#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63)
+
+#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1)
+#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2)
+#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3)
+#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4)
+#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5)
+#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6)
+#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7)
+#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8)
+#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9)
+#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10)
+#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11)
+#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16)
+#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17)
+#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18)
+#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19)
+#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20)
+#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21)
+#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22)
+#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23)
+#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24)
+#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25)
+#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32)
+#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33)
+#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34)
+#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35)
+#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36)
+#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40)
+#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41)
+#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42)
+#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44)
+#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45)
+#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46)
+#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47)
+#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52)
+#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53)
+#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54)
+#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55)
+#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56)
+#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57)
+#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58)
+#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59)
+#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60)
+#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61)
+#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62)
+#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63)
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F))
+#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6)
+
+#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0))
+
+#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP)
+#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0)
+#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1)
+#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2)
+#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3)
+#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA)
+#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB)
+#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC)
+#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD)
+#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0)
+#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1)
+#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2)
+#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3)
+#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0)
+#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1)
+#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2)
+#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3)
+#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0)
+#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1)
+#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2)
+#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3)
+#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0)
+#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1)
+#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1)
+#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1)
+#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2)
+#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1)
+#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3)
+#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1)
+#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW)
+#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
+#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
+#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
+#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
+#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3)
+#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0)
+#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1)
+#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2)
+#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3)
+#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC)
+#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC)
+#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS)
+#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT)
+#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT)
+#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE)
+#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE)
+#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0)
+#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1)
+#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2)
+#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3)
+#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR)
+#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET)
+#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER)
+#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE)
+#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL)
+#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL)
+#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL)
+#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL)
+#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL)
+#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL)
+#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI)
+#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI)
+#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT)
+#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP)
+#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT)
+#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0)
+#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1)
+#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA)
+#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0)
+#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1)
+#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2)
+#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3)
+#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4)
+#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5)
+#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6)
+#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7)
+#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8)
+#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9)
+#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10)
+#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11)
+#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12)
+#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13)
+#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14)
+#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15)
+
+/*
+ * Interrupt mappings (Table 18)
+ */
+
+#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */
+#define K_BCM1480_INT_MAP_I1 1
+#define K_BCM1480_INT_MAP_I2 2
+#define K_BCM1480_INT_MAP_I3 3
+#define K_BCM1480_INT_MAP_I4 4
+#define K_BCM1480_INT_MAP_I5 5
+#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */
+#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */
+
+/*
+ * Interrupt LDT Set Register (Table 19)
+ */
+
+#define S_BCM1480_INT_HT_INTMSG 0
+#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3,S_BCM1480_INT_HT_INTMSG)
+#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_INTMSG)
+#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_INTMSG,M_BCM1480_INT_HT_INTMSG)
+
+#define K_BCM1480_INT_HT_INTMSG_FIXED 0
+#define K_BCM1480_INT_HT_INTMSG_ARBITRATED 1
+#define K_BCM1480_INT_HT_INTMSG_SMI 2
+#define K_BCM1480_INT_HT_INTMSG_NMI 3
+#define K_BCM1480_INT_HT_INTMSG_INIT 4
+#define K_BCM1480_INT_HT_INTMSG_STARTUP 5
+#define K_BCM1480_INT_HT_INTMSG_EXTINT 6
+#define K_BCM1480_INT_HT_INTMSG_RESERVED 7
+
+#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3)
+#define V_BCM1480_INT_HT_EDGETRIGGER 0
+#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE
+
+#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4)
+#define V_BCM1480_INT_HT_PHYSICALDEST 0
+#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE
+
+#define S_BCM1480_INT_HT_INTDEST 5
+#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8,S_BCM1480_INT_HT_INTDEST)
+#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_INTDEST)
+#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_INTDEST,M_BCM1480_INT_HT_INTDEST)
+
+#define S_BCM1480_INT_HT_VECTOR 13
+#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8,S_BCM1480_INT_HT_VECTOR)
+#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_VECTOR)
+#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_VECTOR,M_BCM1480_INT_HT_VECTOR)
+
+/*
+ * Vector prefix (Table 4-7)
+ */
+
+#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH 0x00
+#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40
+#define M_BCM1480_HTVECT_RAISE_INTLDT_LO 0x80
+#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0
+
+#endif /* _BCM1480_INT_H */
diff --git a/include/asm-mips/sibyte/bcm1480_l2c.h b/include/asm-mips/sibyte/bcm1480_l2c.h
new file mode 100644
index 0000000..886b099
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_l2c.h
@@ -0,0 +1,176 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * L2 Cache constants and macros File: bcm1480_l2c.h
+ *
+ * This module contains constants useful for manipulating the
+ * level 2 cache.
+ *
+ * BCM1400 specification level: 1280-UM100-D2 (11/14/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_L2C_H
+#define _BCM1480_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Format of level 2 cache management address (Table 55)
+ */
+
+#define S_BCM1480_L2C_MGMT_INDEX 5
+#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12,S_BCM1480_L2C_MGMT_INDEX)
+#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_INDEX)
+#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_INDEX,M_BCM1480_L2C_MGMT_INDEX)
+
+#define S_BCM1480_L2C_MGMT_WAY 17
+#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3,S_BCM1480_L2C_MGMT_WAY)
+#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_WAY)
+#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_WAY,M_BCM1480_L2C_MGMT_WAY)
+
+#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20)
+#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21)
+
+#define S_BCM1480_L2C_MGMT_ECC_DIAG 22
+#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2,S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_ECC_DIAG,M_BCM1480_L2C_MGMT_ECC_DIAG)
+
+#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000
+
+#define BCM1480_L2C_ENTRIES_PER_WAY 4096
+#define BCM1480_L2C_NUM_WAYS 8
+
+
+/*
+ * Level 2 Cache Tag register (Table 59)
+ */
+
+#define S_BCM1480_L2C_TAG_MBZ 0
+#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5,S_BCM1480_L2C_TAG_MBZ)
+
+#define S_BCM1480_L2C_TAG_INDEX 5
+#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12,S_BCM1480_L2C_TAG_INDEX)
+#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_INDEX)
+#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_INDEX,M_BCM1480_L2C_TAG_INDEX)
+
+/* Note that index bit 16 is also tag bit 40 */
+#define S_BCM1480_L2C_TAG_TAG 17
+#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23,S_BCM1480_L2C_TAG_TAG)
+#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_TAG)
+#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_TAG,M_BCM1480_L2C_TAG_TAG)
+
+#define S_BCM1480_L2C_TAG_ECC 40
+#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6,S_BCM1480_L2C_TAG_ECC)
+#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_ECC)
+#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_ECC,M_BCM1480_L2C_TAG_ECC)
+
+#define S_BCM1480_L2C_TAG_WAY 46
+#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3,S_BCM1480_L2C_TAG_WAY)
+#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_WAY)
+#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_WAY,M_BCM1480_L2C_TAG_WAY)
+
+#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49)
+#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50)
+
+#define S_BCM1480_L2C_DATA_ECC 51
+#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10,S_BCM1480_L2C_DATA_ECC)
+#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_DATA_ECC)
+#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x,S_BCM1480_L2C_DATA_ECC,M_BCM1480_L2C_DATA_ECC)
+
+
+/*
+ * L2 Misc0 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0
+#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_REMOTE)
+#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_REMOTE,M_BCM1480_L2C_MISC0_WAY_REMOTE)
+
+#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8
+#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_LOCAL)
+#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_LOCAL,M_BCM1480_L2C_MISC0_WAY_LOCAL)
+
+#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16
+#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_ENABLE)
+#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_ENABLE,M_BCM1480_L2C_MISC0_WAY_ENABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_DISABLE 24
+#define M_BCM1480_L2C_MISC0_CACHE_DISABLE _SB_MAKEMASK(2,S_BCM1480_L2C_MISC0_CACHE_DISABLE)
+#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_CACHE_DISABLE,M_BCM1480_L2C_MISC0_CACHE_DISABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26
+#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2,S_BCM1480_L2C_MISC0_CACHE_QUAD)
+#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_CACHE_QUAD,M_BCM1480_L2C_MISC0_CACHE_QUAD)
+
+#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30
+#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY)
+
+#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31
+#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP)
+
+
+/*
+ * L2 Misc1 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_0)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_0,M_BCM1480_L2C_MISC1_WAY_AGENT_0)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_1)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_1,M_BCM1480_L2C_MISC1_WAY_AGENT_1)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_2)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_2,M_BCM1480_L2C_MISC1_WAY_AGENT_2)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_3)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_3,M_BCM1480_L2C_MISC1_WAY_AGENT_3)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_4)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_4,M_BCM1480_L2C_MISC1_WAY_AGENT_4)
+
+
+/*
+ * L2 Misc2 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_8)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_8,M_BCM1480_L2C_MISC2_WAY_AGENT_8)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_9)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_9,M_BCM1480_L2C_MISC2_WAY_AGENT_9)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_A)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_A,M_BCM1480_L2C_MISC2_WAY_AGENT_A)
+
+
+#endif /* _BCM1480_L2C_H */
diff --git a/include/asm-mips/sibyte/bcm1480_mc.h b/include/asm-mips/sibyte/bcm1480_mc.h
new file mode 100644
index 0000000..6bdc941
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_mc.h
@@ -0,0 +1,962 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * Memory Controller constants File: bcm1480_mc.h
+ *
+ * This module contains constants and macros useful for
+ * programming the memory controller.
+ *
+ * BCM1400 specification level: 1280-UM100-D1 (11/14/03 Review Copy)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_MC_H
+#define _BCM1480_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Configuration Register (Table 81)
+ */
+
+#define S_BCM1480_MC_INTLV0 0
+#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV0,M_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0)
+
+#define S_BCM1480_MC_INTLV1 8
+#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV1,M_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0)
+
+#define S_BCM1480_MC_INTLV2 16
+#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV2)
+#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV2,M_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0)
+
+#define S_BCM1480_MC_CS_MODE 32
+#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8,S_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS_MODE)
+#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_CS_MODE,M_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0)
+
+#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \
+ V_BCM1480_MC_INTLV1_DEFAULT | \
+ V_BCM1480_MC_INTLV2_DEFAULT | \
+ V_BCM1480_MC_CS_MODE_DEFAULT)
+
+#define K_BCM1480_MC_CS01_MODE 0x03
+#define K_BCM1480_MC_CS02_MODE 0x05
+#define K_BCM1480_MC_CS0123_MODE 0x0F
+#define K_BCM1480_MC_CS0246_MODE 0x55
+#define K_BCM1480_MC_CS0145_MODE 0x33
+#define K_BCM1480_MC_CS0167_MODE 0xC3
+#define K_BCM1480_MC_CSFULL_MODE 0xFF
+
+/*
+ * Chip Select Start Address Register (Table 82)
+ */
+
+#define S_BCM1480_MC_CS0_START 0
+#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12,S_BCM1480_MC_CS0_START)
+#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS0_START)
+#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS0_START,M_BCM1480_MC_CS0_START)
+
+#define S_BCM1480_MC_CS1_START 16
+#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12,S_BCM1480_MC_CS1_START)
+#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS1_START)
+#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS1_START,M_BCM1480_MC_CS1_START)
+
+#define S_BCM1480_MC_CS2_START 32
+#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12,S_BCM1480_MC_CS2_START)
+#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS2_START)
+#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS2_START,M_BCM1480_MC_CS2_START)
+
+#define S_BCM1480_MC_CS3_START 48
+#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12,S_BCM1480_MC_CS3_START)
+#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS3_START)
+#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS3_START,M_BCM1480_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 83)
+ */
+
+#define S_BCM1480_MC_CS0_END 0
+#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12,S_BCM1480_MC_CS0_END)
+#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS0_END)
+#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS0_END,M_BCM1480_MC_CS0_END)
+
+#define S_BCM1480_MC_CS1_END 16
+#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12,S_BCM1480_MC_CS1_END)
+#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS1_END)
+#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS1_END,M_BCM1480_MC_CS1_END)
+
+#define S_BCM1480_MC_CS2_END 32
+#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12,S_BCM1480_MC_CS2_END)
+#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS2_END)
+#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS2_END,M_BCM1480_MC_CS2_END)
+
+#define S_BCM1480_MC_CS3_END 48
+#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12,S_BCM1480_MC_CS3_END)
+#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS3_END)
+#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS3_END,M_BCM1480_MC_CS3_END)
+
+/*
+ * Row Address Bit Select Register 0 (Table 84)
+ */
+
+#define S_BCM1480_MC_ROW00 0
+#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6,S_BCM1480_MC_ROW00)
+#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW00)
+#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW00,M_BCM1480_MC_ROW00)
+
+#define S_BCM1480_MC_ROW01 8
+#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6,S_BCM1480_MC_ROW01)
+#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW01)
+#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW01,M_BCM1480_MC_ROW01)
+
+#define S_BCM1480_MC_ROW02 16
+#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6,S_BCM1480_MC_ROW02)
+#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW02)
+#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW02,M_BCM1480_MC_ROW02)
+
+#define S_BCM1480_MC_ROW03 24
+#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6,S_BCM1480_MC_ROW03)
+#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW03)
+#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW03,M_BCM1480_MC_ROW03)
+
+#define S_BCM1480_MC_ROW04 32
+#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6,S_BCM1480_MC_ROW04)
+#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW04)
+#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW04,M_BCM1480_MC_ROW04)
+
+#define S_BCM1480_MC_ROW05 40
+#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6,S_BCM1480_MC_ROW05)
+#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW05)
+#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW05,M_BCM1480_MC_ROW05)
+
+#define S_BCM1480_MC_ROW06 48
+#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6,S_BCM1480_MC_ROW06)
+#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW06)
+#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW06,M_BCM1480_MC_ROW06)
+
+#define S_BCM1480_MC_ROW07 56
+#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6,S_BCM1480_MC_ROW07)
+#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW07)
+#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW07,M_BCM1480_MC_ROW07)
+
+/*
+ * Row Address Bit Select Register 1 (Table 85)
+ */
+
+#define S_BCM1480_MC_ROW08 0
+#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6,S_BCM1480_MC_ROW08)
+#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW08)
+#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW08,M_BCM1480_MC_ROW08)
+
+#define S_BCM1480_MC_ROW09 8
+#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6,S_BCM1480_MC_ROW09)
+#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW09)
+#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW09,M_BCM1480_MC_ROW09)
+
+#define S_BCM1480_MC_ROW10 16
+#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6,S_BCM1480_MC_ROW10)
+#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW10)
+#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW10,M_BCM1480_MC_ROW10)
+
+#define S_BCM1480_MC_ROW11 24
+#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6,S_BCM1480_MC_ROW11)
+#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW11)
+#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW11,M_BCM1480_MC_ROW11)
+
+#define S_BCM1480_MC_ROW12 32
+#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6,S_BCM1480_MC_ROW12)
+#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW12)
+#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW12,M_BCM1480_MC_ROW12)
+
+#define S_BCM1480_MC_ROW13 40
+#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6,S_BCM1480_MC_ROW13)
+#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW13)
+#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW13,M_BCM1480_MC_ROW13)
+
+#define S_BCM1480_MC_ROW14 48
+#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6,S_BCM1480_MC_ROW14)
+#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW14)
+#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW14,M_BCM1480_MC_ROW14)
+
+#define K_BCM1480_MC_ROWX_BIT_SPACING 8
+
+/*
+ * Column Address Bit Select Register 0 (Table 86)
+ */
+
+#define S_BCM1480_MC_COL00 0
+#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6,S_BCM1480_MC_COL00)
+#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL00)
+#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x,S_BCM1480_MC_COL00,M_BCM1480_MC_COL00)
+
+#define S_BCM1480_MC_COL01 8
+#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6,S_BCM1480_MC_COL01)
+#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL01)
+#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x,S_BCM1480_MC_COL01,M_BCM1480_MC_COL01)
+
+#define S_BCM1480_MC_COL02 16
+#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6,S_BCM1480_MC_COL02)
+#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL02)
+#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x,S_BCM1480_MC_COL02,M_BCM1480_MC_COL02)
+
+#define S_BCM1480_MC_COL03 24
+#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6,S_BCM1480_MC_COL03)
+#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL03)
+#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x,S_BCM1480_MC_COL03,M_BCM1480_MC_COL03)
+
+#define S_BCM1480_MC_COL04 32
+#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6,S_BCM1480_MC_COL04)
+#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL04)
+#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x,S_BCM1480_MC_COL04,M_BCM1480_MC_COL04)
+
+#define S_BCM1480_MC_COL05 40
+#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6,S_BCM1480_MC_COL05)
+#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL05)
+#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x,S_BCM1480_MC_COL05,M_BCM1480_MC_COL05)
+
+#define S_BCM1480_MC_COL06 48
+#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6,S_BCM1480_MC_COL06)
+#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL06)
+#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x,S_BCM1480_MC_COL06,M_BCM1480_MC_COL06)
+
+#define S_BCM1480_MC_COL07 56
+#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6,S_BCM1480_MC_COL07)
+#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL07)
+#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x,S_BCM1480_MC_COL07,M_BCM1480_MC_COL07)
+
+/*
+ * Column Address Bit Select Register 1 (Table 87)
+ */
+
+#define S_BCM1480_MC_COL08 0
+#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6,S_BCM1480_MC_COL08)
+#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL08)
+#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x,S_BCM1480_MC_COL08,M_BCM1480_MC_COL08)
+
+#define S_BCM1480_MC_COL09 8
+#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6,S_BCM1480_MC_COL09)
+#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL09)
+#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x,S_BCM1480_MC_COL09,M_BCM1480_MC_COL09)
+
+#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */
+
+#define S_BCM1480_MC_COL11 24
+#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6,S_BCM1480_MC_COL11)
+#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL11)
+#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x,S_BCM1480_MC_COL11,M_BCM1480_MC_COL11)
+
+#define S_BCM1480_MC_COL12 32
+#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6,S_BCM1480_MC_COL12)
+#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL12)
+#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x,S_BCM1480_MC_COL12,M_BCM1480_MC_COL12)
+
+#define S_BCM1480_MC_COL13 40
+#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6,S_BCM1480_MC_COL13)
+#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL13)
+#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x,S_BCM1480_MC_COL13,M_BCM1480_MC_COL13)
+
+#define S_BCM1480_MC_COL14 48
+#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6,S_BCM1480_MC_COL14)
+#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL14)
+#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x,S_BCM1480_MC_COL14,M_BCM1480_MC_COL14)
+
+#define K_BCM1480_MC_COLX_BIT_SPACING 8
+
+/*
+ * CS0 and CS1 Bank Address Bit Select Register (Table 88)
+ */
+
+#define S_BCM1480_MC_CS01_BANK0 0
+#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK0)
+#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK0)
+#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK0,M_BCM1480_MC_CS01_BANK0)
+
+#define S_BCM1480_MC_CS01_BANK1 8
+#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK1)
+#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK1)
+#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK1,M_BCM1480_MC_CS01_BANK1)
+
+#define S_BCM1480_MC_CS01_BANK2 16
+#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK2)
+#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK2)
+#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK2,M_BCM1480_MC_CS01_BANK2)
+
+/*
+ * CS2 and CS3 Bank Address Bit Select Register (Table 89)
+ */
+
+#define S_BCM1480_MC_CS23_BANK0 0
+#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK0)
+#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK0)
+#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK0,M_BCM1480_MC_CS23_BANK0)
+
+#define S_BCM1480_MC_CS23_BANK1 8
+#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK1)
+#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK1)
+#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK1,M_BCM1480_MC_CS23_BANK1)
+
+#define S_BCM1480_MC_CS23_BANK2 16
+#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK2)
+#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK2)
+#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK2,M_BCM1480_MC_CS23_BANK2)
+
+#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING 8
+
+/*
+ * DRAM Command Register (Table 90)
+ */
+
+#define S_BCM1480_MC_COMMAND 0
+#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4,S_BCM1480_MC_COMMAND)
+#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COMMAND)
+#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x,S_BCM1480_MC_COMMAND,M_BCM1480_MC_COMMAND)
+
+#define K_BCM1480_MC_COMMAND_EMRS 0
+#define K_BCM1480_MC_COMMAND_MRS 1
+#define K_BCM1480_MC_COMMAND_PRE 2
+#define K_BCM1480_MC_COMMAND_AR 3
+#define K_BCM1480_MC_COMMAND_SETRFSH 4
+#define K_BCM1480_MC_COMMAND_CLRRFSH 5
+#define K_BCM1480_MC_COMMAND_SETPWRDN 6
+#define K_BCM1480_MC_COMMAND_CLRPWRDN 7
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_COMMAND_EMRS2 8
+#define K_BCM1480_MC_COMMAND_EMRS3 9
+#define K_BCM1480_MC_COMMAND_ENABLE_MCLK 10
+#define K_BCM1480_MC_COMMAND_DISABLE_MCLK 11
+#endif
+
+#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS)
+#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS)
+#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE)
+#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR)
+#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH)
+#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH)
+#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN)
+#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2)
+#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3)
+#define V_BCM1480_MC_COMMAND_ENABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK)
+#define V_BCM1480_MC_COMMAND_DISABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK)
+#endif
+
+#define S_BCM1480_MC_CS0 4
+#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11)
+
+#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16)
+
+/*
+ * DRAM Mode Register (Table 91)
+ */
+
+#define S_BCM1480_MC_EMODE 0
+#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15,S_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_EMODE)
+#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x,S_BCM1480_MC_EMODE,M_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0)
+
+#define S_BCM1480_MC_MODE 16
+#define M_BCM1480_MC_MODE _SB_MAKEMASK(15,S_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_MODE)
+#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_MODE,M_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0)
+
+#define S_BCM1480_MC_DRAM_TYPE 32
+#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4,S_BCM1480_MC_DRAM_TYPE)
+#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DRAM_TYPE)
+#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x,S_BCM1480_MC_DRAM_TYPE,M_BCM1480_MC_DRAM_TYPE)
+
+#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0
+#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_DRAM_TYPE_DDR2 2
+#endif
+
+#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
+#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_DRAM_TYPE_DDR2 V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2)
+#endif
+
+#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36)
+#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39)
+
+#define S_BCM1480_MC_PG_POLICY 40
+#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2,S_BCM1480_MC_PG_POLICY)
+#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PG_POLICY)
+#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x,S_BCM1480_MC_PG_POLICY,M_BCM1480_MC_PG_POLICY)
+
+#define K_BCM1480_MC_PG_POLICY_CLOSED 0
+#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1
+
+#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED)
+#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_2T_CMD _SB_MAKEMASK1(42)
+#define M_BCM1480_MC_ECC_COR_DIS _SB_MAKEMASK1(43)
+#endif
+
+#define V_BCM1480_MC_DRAMMODE_DEFAULT V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \
+ V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+/*
+ * Memory Clock Configuration Register (Table 92)
+ */
+
+#define S_BCM1480_MC_CLK_RATIO 0
+#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6,S_BCM1480_MC_CLK_RATIO)
+#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CLK_RATIO)
+#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x,S_BCM1480_MC_CLK_RATIO,M_BCM1480_MC_CLK_RATIO)
+
+#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10)
+
+#define S_BCM1480_MC_REF_RATE 8
+#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8,S_BCM1480_MC_REF_RATE)
+#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_REF_RATE)
+#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x,S_BCM1480_MC_REF_RATE,M_BCM1480_MC_REF_RATE)
+
+#define K_BCM1480_MC_REF_RATE_100MHz 0x31
+#define K_BCM1480_MC_REF_RATE_200MHz 0x62
+#define K_BCM1480_MC_REF_RATE_400MHz 0xC4
+
+#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz)
+#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz)
+#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz)
+#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_AUTO_REF_DIS _SB_MAKEMASK1(16)
+#endif
+
+/*
+ * ODT Register (Table 99)
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_RD_ODT0_CS0 _SB_MAKEMASK1(0)
+#define M_BCM1480_MC_RD_ODT0_CS2 _SB_MAKEMASK1(1)
+#define M_BCM1480_MC_RD_ODT0_CS4 _SB_MAKEMASK1(2)
+#define M_BCM1480_MC_RD_ODT0_CS6 _SB_MAKEMASK1(3)
+#define M_BCM1480_MC_WR_ODT0_CS0 _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_WR_ODT0_CS2 _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_WR_ODT0_CS4 _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_WR_ODT0_CS6 _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_RD_ODT2_CS0 _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RD_ODT2_CS2 _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_RD_ODT2_CS4 _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_RD_ODT2_CS6 _SB_MAKEMASK1(11)
+#define M_BCM1480_MC_WR_ODT2_CS0 _SB_MAKEMASK1(12)
+#define M_BCM1480_MC_WR_ODT2_CS2 _SB_MAKEMASK1(13)
+#define M_BCM1480_MC_WR_ODT2_CS4 _SB_MAKEMASK1(14)
+#define M_BCM1480_MC_WR_ODT2_CS6 _SB_MAKEMASK1(15)
+#define M_BCM1480_MC_RD_ODT4_CS0 _SB_MAKEMASK1(16)
+#define M_BCM1480_MC_RD_ODT4_CS2 _SB_MAKEMASK1(17)
+#define M_BCM1480_MC_RD_ODT4_CS4 _SB_MAKEMASK1(18)
+#define M_BCM1480_MC_RD_ODT4_CS6 _SB_MAKEMASK1(19)
+#define M_BCM1480_MC_WR_ODT4_CS0 _SB_MAKEMASK1(20)
+#define M_BCM1480_MC_WR_ODT4_CS2 _SB_MAKEMASK1(21)
+#define M_BCM1480_MC_WR_ODT4_CS4 _SB_MAKEMASK1(22)
+#define M_BCM1480_MC_WR_ODT4_CS6 _SB_MAKEMASK1(23)
+#define M_BCM1480_MC_RD_ODT6_CS0 _SB_MAKEMASK1(24)
+#define M_BCM1480_MC_RD_ODT6_CS2 _SB_MAKEMASK1(25)
+#define M_BCM1480_MC_RD_ODT6_CS4 _SB_MAKEMASK1(26)
+#define M_BCM1480_MC_RD_ODT6_CS6 _SB_MAKEMASK1(27)
+#define M_BCM1480_MC_WR_ODT6_CS0 _SB_MAKEMASK1(28)
+#define M_BCM1480_MC_WR_ODT6_CS2 _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_WR_ODT6_CS4 _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32)
+#endif
+
+/*
+ * Memory DLL Configuration Register (Table 93)
+ */
+
+#define S_BCM1480_MC_ADDR_COARSE_ADJ 0
+#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_COARSE_ADJ,M_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_ADDR_FREQ_RANGE 8
+#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_FREQ_RANGE,M_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_ADDR_FINE_ADJ 8
+#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_FINE_ADJ)
+#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_FINE_ADJ,M_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT V_BCM1480_MC_ADDR_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQI_COARSE_ADJ 16
+#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_COARSE_ADJ)
+#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_COARSE_ADJ,M_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQI_FREQ_RANGE 24
+#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_FREQ_RANGE)
+#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_FREQ_RANGE,M_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQI_FINE_ADJ 24
+#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_FINE_ADJ)
+#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_FINE_ADJ,M_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT V_BCM1480_MC_DQI_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQO_COARSE_ADJ 32
+#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_COARSE_ADJ)
+#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_COARSE_ADJ,M_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQO_FREQ_RANGE 40
+#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_FREQ_RANGE)
+#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_FREQ_RANGE,M_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQO_FINE_ADJ 40
+#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_FINE_ADJ)
+#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_FINE_ADJ,M_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT V_BCM1480_MC_DQO_FINE_ADJ(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_PDSEL 44
+#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_PDSEL)
+#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_PDSEL,M_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0)
+
+#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46)
+#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47)
+#endif
+
+#define S_BCM1480_MC_DLL_DEFAULT 48
+#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_REGCTRL 54
+#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_REGCTRL)
+#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_REGCTRL,M_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL V_BCM1480_MC_DLL_REGCTRL(0x0)
+#endif
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_FREQ_RANGE 56
+#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_FREQ_RANGE)
+#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_FREQ_RANGE,M_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DLL_STEP_SIZE 56
+#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4,S_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_STEP_SIZE)
+#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_STEP_SIZE,M_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT V_BCM1480_MC_DLL_STEP_SIZE(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_BGCTRL 60
+#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_BGCTRL)
+#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_BGCTRL,M_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0)
+#endif
+
+#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63)
+
+/*
+ * Memory Drive Configuration Register (Table 94)
+ */
+
+#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0
+#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3,S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_RTT_BYP_PULLDOWN,M_BCM1480_MC_RTT_BYP_PULLDOWN)
+
+#define S_BCM1480_MC_RTT_BYP_PULLUP 6
+#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3,S_BCM1480_MC_RTT_BYP_PULLUP)
+#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_RTT_BYP_PULLUP)
+#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_RTT_BYP_PULLUP,M_BCM1480_MC_RTT_BYP_PULLUP)
+
+#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN 10
+#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN,M_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15
+#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLUP,M_BCM1480_MC_PVT_BYP_C1_PULLUP)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN 20
+#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN,M_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25
+#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLUP,M_BCM1480_MC_PVT_BYP_C2_PULLUP)
+
+#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34)
+#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35)
+#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36)
+
+#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39)
+#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40)
+#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41)
+
+/*
+ * ECC Test Data Register (Table 95)
+ */
+
+#define S_BCM1480_MC_DATA_INVERT 0
+#define M_DATA_ECC_INVERT _SB_MAKEMASK(64,S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * ECC Test ECC Register (Table 96)
+ */
+
+#define S_BCM1480_MC_ECC_INVERT 0
+#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8,S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * SDRAM Timing Register (Table 97)
+ */
+
+#define S_BCM1480_MC_tRCD 0
+#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4,S_BCM1480_MC_tRCD)
+#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCD)
+#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCD,M_BCM1480_MC_tRCD)
+#define K_BCM1480_MC_tRCD_DEFAULT 3
+#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT)
+
+#define S_BCM1480_MC_tCL 4
+#define M_BCM1480_MC_tCL _SB_MAKEMASK(4,S_BCM1480_MC_tCL)
+#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tCL)
+#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x,S_BCM1480_MC_tCL,M_BCM1480_MC_tCL)
+#define K_BCM1480_MC_tCL_DEFAULT 2
+#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT)
+
+#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8)
+
+#define S_BCM1480_MC_tWR 9
+#define M_BCM1480_MC_tWR _SB_MAKEMASK(3,S_BCM1480_MC_tWR)
+#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tWR)
+#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x,S_BCM1480_MC_tWR,M_BCM1480_MC_tWR)
+#define K_BCM1480_MC_tWR_DEFAULT 2
+#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT)
+
+#define S_BCM1480_MC_tCwD 12
+#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4,S_BCM1480_MC_tCwD)
+#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tCwD)
+#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x,S_BCM1480_MC_tCwD,M_BCM1480_MC_tCwD)
+#define K_BCM1480_MC_tCwD_DEFAULT 1
+#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT)
+
+#define S_BCM1480_MC_tRP 16
+#define M_BCM1480_MC_tRP _SB_MAKEMASK(4,S_BCM1480_MC_tRP)
+#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRP)
+#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRP,M_BCM1480_MC_tRP)
+#define K_BCM1480_MC_tRP_DEFAULT 4
+#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT)
+
+#define S_BCM1480_MC_tRRD 20
+#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4,S_BCM1480_MC_tRRD)
+#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRRD)
+#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x,S_BCM1480_MC_tRRD,M_BCM1480_MC_tRRD)
+#define K_BCM1480_MC_tRRD_DEFAULT 2
+#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT)
+
+#define S_BCM1480_MC_tRCw 24
+#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5,S_BCM1480_MC_tRCw)
+#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCw)
+#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCw,M_BCM1480_MC_tRCw)
+#define K_BCM1480_MC_tRCw_DEFAULT 10
+#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT)
+
+#define S_BCM1480_MC_tRCr 32
+#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5,S_BCM1480_MC_tRCr)
+#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCr)
+#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCr,M_BCM1480_MC_tRCr)
+#define K_BCM1480_MC_tRCr_DEFAULT 9
+#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_tFAW 40
+#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6,S_BCM1480_MC_tFAW)
+#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tFAW)
+#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x,S_BCM1480_MC_tFAW,M_BCM1480_MC_tFAW)
+#define K_BCM1480_MC_tFAW_DEFAULT 0
+#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT)
+#endif
+
+#define S_BCM1480_MC_tRFC 48
+#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7,S_BCM1480_MC_tRFC)
+#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRFC)
+#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x,S_BCM1480_MC_tRFC,M_BCM1480_MC_tRFC)
+#define K_BCM1480_MC_tRFC_DEFAULT 12
+#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT)
+
+#define S_BCM1480_MC_tFIFO 56
+#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2,S_BCM1480_MC_tFIFO)
+#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tFIFO)
+#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x,S_BCM1480_MC_tFIFO,M_BCM1480_MC_tFIFO)
+#define K_BCM1480_MC_tFIFO_DEFAULT 0
+#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT)
+
+#define S_BCM1480_MC_tW2R 58
+#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2,S_BCM1480_MC_tW2R)
+#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tW2R)
+#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x,S_BCM1480_MC_tW2R,M_BCM1480_MC_tW2R)
+#define K_BCM1480_MC_tW2R_DEFAULT 1
+#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT)
+
+#define S_BCM1480_MC_tR2W 60
+#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2,S_BCM1480_MC_tR2W)
+#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tR2W)
+#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x,S_BCM1480_MC_tR2W,M_BCM1480_MC_tR2W)
+#define K_BCM1480_MC_tR2W_DEFAULT 0
+#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT)
+
+#define M_BCM1480_MC_tR2R _SB_MAKEMASK1(62)
+
+#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \
+ V_BCM1480_MC_tFIFO_DEFAULT | \
+ V_BCM1480_MC_tR2W_DEFAULT | \
+ V_BCM1480_MC_tW2R_DEFAULT | \
+ V_BCM1480_MC_tRFC_DEFAULT | \
+ V_BCM1480_MC_tRCr_DEFAULT | \
+ V_BCM1480_MC_tRCw_DEFAULT | \
+ V_BCM1480_MC_tRRD_DEFAULT | \
+ V_BCM1480_MC_tRP_DEFAULT | \
+ V_BCM1480_MC_tCwD_DEFAULT | \
+ V_BCM1480_MC_tWR_DEFAULT | \
+ M_BCM1480_MC_tCrDh | \
+ V_BCM1480_MC_tCL_DEFAULT | \
+ V_BCM1480_MC_tRCD_DEFAULT)
+
+/*
+ * SDRAM Timing Register 2
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+
+#define S_BCM1480_MC_tAL 0
+#define M_BCM1480_MC_tAL _SB_MAKEMASK(4,S_BCM1480_MC_tAL)
+#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tAL)
+#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x,S_BCM1480_MC_tAL,M_BCM1480_MC_tAL)
+#define K_BCM1480_MC_tAL_DEFAULT 0
+#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT)
+
+#define S_BCM1480_MC_tRTP 4
+#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3,S_BCM1480_MC_tRTP)
+#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRTP)
+#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRTP,M_BCM1480_MC_tRTP)
+#define K_BCM1480_MC_tRTP_DEFAULT 2
+#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT)
+
+#define S_BCM1480_MC_tW2W 8
+#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2,S_BCM1480_MC_tW2W)
+#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tW2W)
+#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x,S_BCM1480_MC_tW2W,M_BCM1480_MC_tW2W)
+#define K_BCM1480_MC_tW2W_DEFAULT 0
+#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT)
+
+#define S_BCM1480_MC_tRAP 12
+#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4,S_BCM1480_MC_tRAP)
+#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRAP)
+#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRAP,M_BCM1480_MC_tRAP)
+#define K_BCM1480_MC_tRAP_DEFAULT 0
+#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT)
+
+#endif
+
+
+
+/*
+ * Global Registers: single instances per BCM1480
+ */
+
+/*
+ * Global Configuration Register (Table 99)
+ */
+
+#define S_BCM1480_MC_BLK_SET_MARK 8
+#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4,S_BCM1480_MC_BLK_SET_MARK)
+#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x,S_BCM1480_MC_BLK_SET_MARK)
+#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x,S_BCM1480_MC_BLK_SET_MARK,M_BCM1480_MC_BLK_SET_MARK)
+
+#define S_BCM1480_MC_BLK_CLR_MARK 12
+#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4,S_BCM1480_MC_BLK_CLR_MARK)
+#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x,S_BCM1480_MC_BLK_CLR_MARK)
+#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x,S_BCM1480_MC_BLK_CLR_MARK,M_BCM1480_MC_BLK_CLR_MARK)
+
+#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16)
+
+#define S_BCM1480_MC_MAX_AGE 20
+#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4,S_BCM1480_MC_MAX_AGE)
+#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_MAX_AGE)
+#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x,S_BCM1480_MC_MAX_AGE,M_BCM1480_MC_MAX_AGE)
+
+#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_SLEW 33
+#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2,S_BCM1480_MC_SLEW)
+#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x,S_BCM1480_MC_SLEW)
+#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x,S_BCM1480_MC_SLEW,M_BCM1480_MC_SLEW)
+
+#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35)
+
+/*
+ * Global Channel Interleave Register (Table 100)
+ */
+
+#define S_BCM1480_MC_INTLV0 0
+#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV0,M_BCM1480_MC_INTLV0)
+
+#define S_BCM1480_MC_INTLV1 8
+#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV1,M_BCM1480_MC_INTLV1)
+
+#define S_BCM1480_MC_INTLV_MODE 16
+#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3,S_BCM1480_MC_INTLV_MODE)
+#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV_MODE)
+#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV_MODE,M_BCM1480_MC_INTLV_MODE)
+
+#define K_BCM1480_MC_INTLV_MODE_NONE 0x0
+#define K_BCM1480_MC_INTLV_MODE_01 0x1
+#define K_BCM1480_MC_INTLV_MODE_23 0x2
+#define K_BCM1480_MC_INTLV_MODE_01_23 0x3
+#define K_BCM1480_MC_INTLV_MODE_0123 0x4
+
+#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE)
+#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01)
+#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23)
+#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23)
+#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123)
+
+/*
+ * ECC Status Register
+ */
+
+#define S_BCM1480_MC_ECC_ERR_ADDR 0
+#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37,S_BCM1480_MC_ECC_ERR_ADDR)
+#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_ERR_ADDR)
+#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_ERR_ADDR,M_BCM1480_MC_ECC_ERR_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60)
+#endif
+
+#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61)
+#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62)
+#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63)
+
+/*
+ * Global ECC Address Register (Table 102)
+ */
+
+#define S_BCM1480_MC_ECC_CORR_ADDR 0
+#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37,S_BCM1480_MC_ECC_CORR_ADDR)
+#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_CORR_ADDR)
+#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_CORR_ADDR,M_BCM1480_MC_ECC_CORR_ADDR)
+
+/*
+ * Global ECC Correction Register (Table 103)
+ */
+
+#define S_BCM1480_MC_ECC_CORRECT 0
+#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64,S_BCM1480_MC_ECC_CORRECT)
+#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_CORRECT)
+#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_CORRECT,M_BCM1480_MC_ECC_CORRECT)
+
+/*
+ * Global ECC Performance Counters Control Register (Table 104)
+ */
+
+#define S_BCM1480_MC_CHANNEL_SELECT 0
+#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4,S_BCM1480_MC_CHANNEL_SELECT)
+#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CHANNEL_SELECT)
+#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x,S_BCM1480_MC_CHANNEL_SELECT,M_BCM1480_MC_CHANNEL_SELECT)
+#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1
+#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2
+#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4
+#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8
+
+#endif /* _BCM1480_MC_H */
diff --git a/include/asm-mips/sibyte/bcm1480_regs.h b/include/asm-mips/sibyte/bcm1480_regs.h
new file mode 100644
index 0000000..c2dd2fe
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_regs.h
@@ -0,0 +1,869 @@
+/* *********************************************************************
+ * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
+ *
+ * Register Definitions File: bcm1480_regs.h
+ *
+ * This module contains the addresses of the on-chip peripherals
+ * on the BCM1280 and BCM1480.
+ *
+ * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _BCM1480_REGS_H
+#define _BCM1480_REGS_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Pull in the BCM1250's registers since a great deal of the 1480's
+ * functions are the same as the BCM1250.
+ ********************************************************************* */
+
+#include "sb1250_regs.h"
+
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * Register addresses are grouped by function and follow the order
+ * of the User Manual.
+ *
+ * For the most part, when there is more than one peripheral
+ * of the same type on the SOC, the constants below will be
+ * offsets from the base of each peripheral. For example,
+ * the MAC registers are described as offsets from the first
+ * MAC register, and there will be a MAC_REGISTER() macro
+ * to calculate the base address of a given MAC.
+ *
+ * The information in this file is based on the BCM1X55/BCM1X80
+ * User Manual, Document 1X55_1X80-UM100-R, 22/12/03.
+ *
+ * This file is basically a "what's new" header file. Since the
+ * BCM1250 and the new BCM1480 (and derivatives) share many common
+ * features, this file contains only what's new or changed from
+ * the 1250. (above, you can see that we include the 1250 symbols
+ * to get the base functionality).
+ *
+ * In software, be sure to use the correct symbols, particularly
+ * for blocks that are different between the two chip families.
+ * All BCM1480-specific symbols have _BCM1480_ in their names,
+ * and all BCM1250-specific and "base" functions that are common in
+ * both chips have no special names (this is for compatibility with
+ * older include files). Therefore, if you're working with the
+ * SCD, which is very different on each chip, A_SCD_xxx implies
+ * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+ * version.
+ ********************************************************************* */
+
+
+/* *********************************************************************
+ * Memory Controller Registers (Section 6)
+ ********************************************************************* */
+
+#define A_BCM1480_MC_BASE_0 0x0010050000
+#define A_BCM1480_MC_BASE_1 0x0010051000
+#define A_BCM1480_MC_BASE_2 0x0010052000
+#define A_BCM1480_MC_BASE_3 0x0010053000
+#define BCM1480_MC_REGISTER_SPACING 0x1000
+
+#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
+#define A_BCM1480_MC_REGISTER(ctlid,reg) (A_BCM1480_MC_BASE(ctlid)+(reg))
+
+#define R_BCM1480_MC_CONFIG 0x0000000100
+#define R_BCM1480_MC_CS_START 0x0000000120
+#define R_BCM1480_MC_CS_END 0x0000000140
+#define S_BCM1480_MC_CS_STARTEND 24
+
+#define R_BCM1480_MC_CS01_ROW0 0x0000000180
+#define R_BCM1480_MC_CS01_ROW1 0x00000001A0
+#define R_BCM1480_MC_CS23_ROW0 0x0000000200
+#define R_BCM1480_MC_CS23_ROW1 0x0000000220
+#define R_BCM1480_MC_CS01_COL0 0x0000000280
+#define R_BCM1480_MC_CS01_COL1 0x00000002A0
+#define R_BCM1480_MC_CS23_COL0 0x0000000300
+#define R_BCM1480_MC_CS23_COL1 0x0000000320
+
+#define R_BCM1480_MC_CSX_BASE 0x0000000180
+#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */
+#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */
+
+#define R_BCM1480_MC_CS01_BA 0x0000000380
+#define R_BCM1480_MC_CS23_BA 0x00000003A0
+#define R_BCM1480_MC_DRAMCMD 0x0000000400
+#define R_BCM1480_MC_DRAMMODE 0x0000000420
+#define R_BCM1480_MC_CLOCK_CFG 0x0000000440
+#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG
+#define R_BCM1480_MC_TEST_DATA 0x0000000480
+#define R_BCM1480_MC_TEST_ECC 0x00000004A0
+#define R_BCM1480_MC_TIMING1 0x00000004C0
+#define R_BCM1480_MC_TIMING2 0x00000004E0
+#define R_BCM1480_MC_DLL_CFG 0x0000000500
+#define R_BCM1480_MC_DRIVE_CFG 0x0000000520
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define R_BCM1480_MC_ODT 0x0000000460
+#define R_BCM1480_MC_ECC_STATUS 0x0000000540
+#endif
+
+/* Global registers (single instance) */
+#define A_BCM1480_MC_GLB_CONFIG 0x0010054100
+#define A_BCM1480_MC_GLB_INTLV 0x0010054120
+#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140
+#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160
+#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180
+#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0
+
+/* *********************************************************************
+ * L2 Cache Control Registers (Section 5)
+ ********************************************************************* */
+
+#define A_BCM1480_L2_BASE 0x0010040000
+
+#define A_BCM1480_L2_READ_TAG 0x0010040018
+#define A_BCM1480_L2_ECC_TAG 0x0010040038
+#define A_BCM1480_L2_MISC0_VALUE 0x0010040058
+#define A_BCM1480_L2_MISC1_VALUE 0x0010040078
+#define A_BCM1480_L2_MISC2_VALUE 0x0010040098
+#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */
+#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */
+#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */
+#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */
+#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */
+#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */
+#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */
+#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */
+#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */
+#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8))
+#define A_BCM1480_L2_BANK_BASE 0x00D0300000
+#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
+#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000
+
+
+/* *********************************************************************
+ * PCI-X Interface Registers (Section 7)
+ ********************************************************************* */
+
+#define A_BCM1480_PCI_BASE 0x0010061400
+
+#define A_BCM1480_PCI_RESET 0x0010061400
+#define A_BCM1480_PCI_DLL 0x0010061500
+
+#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000
+
+/* *********************************************************************
+ * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
+ ********************************************************************* */
+
+/* No register changes with Rev.C BCM1250, but one additional MAC */
+
+#define A_BCM1480_MAC_BASE_2 0x0010066000
+
+#ifndef A_MAC_BASE_2
+#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2
+#endif
+
+#define A_BCM1480_MAC_BASE_3 0x0010067000
+#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3
+
+#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038
+
+#ifndef R_MAC_DMA_OODPKTLOST
+#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST
+#endif
+
+
+/* *********************************************************************
+ * DUART Registers (Section 14)
+ ********************************************************************* */
+
+/* No significant differences from BCM1250, two DUARTs */
+
+/* Conventions, per user manual:
+ * DUART generic, channels A,B,C,D
+ * DUART0 implementing channels A,B
+ * DUART1 inplementing channels C,D
+ */
+
+#define BCM1480_DUART_NUM_PORTS 4
+
+#define A_BCM1480_DUART0 0x0010060000
+#define A_BCM1480_DUART1 0x0010060400
+#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
+
+#define BCM1480_DUART_CHANREG_SPACING 0x100
+#define A_BCM1480_DUART_CHANREG(chan,reg) (A_BCM1480_DUART(chan) \
+ + BCM1480_DUART_CHANREG_SPACING*((chan)&1) \
+ + (reg))
+#define R_BCM1480_DUART_CHANREG(chan,reg) (BCM1480_DUART_CHANREG_SPACING*((chan)&1) + (reg))
+
+#define R_BCM1480_DUART_IMRREG(chan) (R_DUART_IMR_A + ((chan)&1)*DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_ISRREG(chan) (R_DUART_ISR_A + ((chan)&1)*DUART_IMRISR_SPACING)
+
+#define A_BCM1480_DUART_IMRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan))
+#define A_BCM1480_DUART_ISRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan))
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400
+#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410
+#define A_BCM1480_DUART_STATUS_C 0x0010060420
+#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430
+#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440
+#define A_BCM1480_DUART_CMD_C 0x0010060450
+#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460
+#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470
+#define A_BCM1480_DUART_OPCR_C 0x0010060480
+#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490
+
+#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500
+#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510
+#define A_BCM1480_DUART_STATUS_D 0x0010060520
+#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530
+#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540
+#define A_BCM1480_DUART_CMD_D 0x0010060550
+#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560
+#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570
+#define A_BCM1480_DUART_OPCR_D 0x0010060580
+#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590
+
+#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600
+#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610
+#define A_BCM1480_DUART_ISR_C 0x0010060620
+#define A_BCM1480_DUART_IMR_C 0x0010060630
+#define A_BCM1480_DUART_ISR_D 0x0010060640
+#define A_BCM1480_DUART_IMR_D 0x0010060650
+#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660
+#define A_BCM1480_DUART_OPCR_CD 0x0010060670
+#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680
+#define A_BCM1480_DUART_ISR_CD 0x0010060690
+#define A_BCM1480_DUART_IMR_CD 0x00100606A0
+#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0
+#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0
+#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0
+#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0
+
+
+/* *********************************************************************
+ * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16)
+ ********************************************************************* */
+
+#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58
+#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68
+
+/* *********************************************************************
+ * GPIO Registers (Section 17)
+ ********************************************************************* */
+
+/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
+
+#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78
+#define R_BCM1480_GPIO_INT_ADD_TYPE (-8)
+
+#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE
+#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE
+
+/* *********************************************************************
+ * SMBus Registers (Section 18)
+ ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/* *********************************************************************
+ * Timer Registers (Sections 4.6)
+ ********************************************************************* */
+
+/* BCM1480 has two additional watchdogs */
+
+/* Watchdog timers */
+
+#define A_BCM1480_SCD_WDOG_2 0x0010022050
+#define A_BCM1480_SCD_WDOG_3 0x0010022150
+
+#define BCM1480_SCD_NUM_WDOGS 4
+
+#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
+#define A_BCM1480_SCD_WDOG_REGISTER(w,r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
+
+#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050
+#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058
+#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060
+
+#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150
+#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158
+#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160
+
+/* BCM1480 has two additional compare registers */
+
+#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18
+
+/* *********************************************************************
+ * System Control Registers (Section 4.2)
+ ********************************************************************* */
+
+/* Scratch register in different place */
+
+#define A_BCM1480_SCD_SCRATCH 0x100200A0
+
+/* *********************************************************************
+ * System Address Trap Registers (Section 4.9)
+ ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/* *********************************************************************
+ * System Interrupt Mapper Registers (Sections 4.3-4.5)
+ ********************************************************************* */
+
+#define A_BCM1480_IMR_CPU0_BASE 0x0010020000
+#define A_BCM1480_IMR_CPU1_BASE 0x0010022000
+#define A_BCM1480_IMR_CPU2_BASE 0x0010024000
+#define A_BCM1480_IMR_CPU3_BASE 0x0010026000
+#define BCM1480_IMR_REGISTER_SPACING 0x2000
+#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13
+
+#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
+#define A_BCM1480_IMR_REGISTER(cpu,reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
+
+/* Most IMR registers are 128 bits, implemented as non-contiguous
+ 64-bit registers high (_H) and low (_L) */
+#define BCM1480_IMR_HL_SPACING 0x1000
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010
+#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020
+#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
+#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048
+#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0
+#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8
+#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0
+#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0
+#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8
+#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100
+#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200
+#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010
+#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020
+#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300
+#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
+ (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
+#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu,reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
+
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */
+
+/* *********************************************************************
+ * System Performance Counter Registers (Section 4.7)
+ ********************************************************************* */
+
+/* BCM1480 has four more performance counter registers, and two control
+ registers. */
+
+#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0
+
+#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0
+#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0
+#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8
+#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1
+
+#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0
+#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1
+#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2
+#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3
+
+#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0
+#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8
+#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500
+#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508
+
+/* *********************************************************************
+ * System Bus Watcher Registers (Section 4.8)
+ ********************************************************************* */
+
+
+/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
+
+#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8
+
+/* *********************************************************************
+ * System Debug Controller Registers (Section 19)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+/* *********************************************************************
+ * System Trace Unit Registers (Sections 4.10)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+/* *********************************************************************
+ * Data Mover DMA Registers (Section 10.7)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+
+/* *********************************************************************
+ * HyperTransport Interface Registers (Section 8)
+ ********************************************************************* */
+
+#define BCM1480_HT_NUM_PORTS 3
+#define BCM1480_HT_PORT_SPACING 0x800
+#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
+
+#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000
+#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800
+#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000
+#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000
+
+
+/* *********************************************************************
+ * Node Controller Registers (Section 9)
+ ********************************************************************* */
+
+#define A_BCM1480_NC_BASE 0x00DFBD0000
+
+#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000
+#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020
+#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040
+#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060
+#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080
+#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0
+#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0
+
+#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0
+#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100
+#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120
+#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140
+
+#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200
+#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220
+#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240
+#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260
+#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280
+#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0
+#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0
+#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0
+#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300
+#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320
+#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000
+#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020
+#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040
+
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
+
+
+/* *********************************************************************
+ * H&R Block Configuration Registers (Section 12.4)
+ ********************************************************************* */
+
+#define A_BCM1480_HR_BASE_0 0x00DF820000
+#define A_BCM1480_HR_BASE_1 0x00DF8A0000
+#define A_BCM1480_HR_BASE_2 0x00DF920000
+#define BCM1480_HR_REGISTER_SPACING 0x80000
+
+#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
+#define A_BCM1480_HR_REGISTER(idx,reg) (A_BCM1480_HR_BASE(idx) + (reg))
+
+#define R_BCM1480_HR_CFG 0x0000000000
+
+#define R_BCM1480_HR_MAPPING 0x0000010010
+
+#define BCM1480_HR_RULE_SPACING 0x0000000010
+#define BCM1480_HR_NUM_RULES 16
+#define BCM1480_HR_OP_OFFSET 0x0000000100
+#define BCM1480_HR_TYPE_OFFSET 0x0000000108
+#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+
+#define BCM1480_HR_LEAF_SPACING 0x0000000010
+#define BCM1480_HR_NUM_LEAVES 10
+#define BCM1480_HR_LEAF_OFFSET 0x0000000300
+#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
+
+#define R_BCM1480_HR_EX_LEAF0 0x00000003A0
+
+#define BCM1480_HR_PATH_SPACING 0x0000000010
+#define BCM1480_HR_NUM_PATHS 16
+#define BCM1480_HR_PATH_OFFSET 0x0000000600
+#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
+
+#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700
+
+#define BCM1480_HR_ROUTE_SPACING 8
+#define BCM1480_HR_NUM_ROUTES 512
+#define BCM1480_HR_ROUTE_OFFSET 0x0000001000
+#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
+
+
+/* checked to here - ehs */
+/* *********************************************************************
+ * Packet Manager DMA Registers (Section 12.5)
+ ********************************************************************* */
+
+#define A_BCM1480_PM_BASE 0x0010056000
+
+#define A_BCM1480_PMI_LCL_0 0x0010058000
+#define A_BCM1480_PMO_LCL_0 0x001005C000
+#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
+
+#define BCM1480_PM_LCL_REGISTER_SPACING 0x100
+#define BCM1480_PM_NUM_CHANNELS 32
+
+#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMI_LCL_REGISTER(idx,reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
+#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMO_LCL_REGISTER(idx,reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
+
+#define BCM1480_PM_INT_PACKING 8
+#define BCM1480_PM_INT_FUNCTION_SPACING 0x40
+#define BCM1480_PM_INT_NUM_FUNCTIONS 3
+
+/*
+ * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
+ */
+
+#define R_BCM1480_PM_BASE_SIZE 0x0000000000
+#define R_BCM1480_PM_CNT 0x0000000008
+#define R_BCM1480_PM_PFCNT 0x0000000010
+#define R_BCM1480_PM_LAST 0x0000000018
+#define R_BCM1480_PM_PFINDX 0x0000000020
+#define R_BCM1480_PM_INT_WMK 0x0000000028
+#define R_BCM1480_PM_CONFIG0 0x0000000030
+#define R_BCM1480_PM_LOCALDEBUG 0x0000000078
+#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */
+#define R_BCM1480_PM_INT_CNFG 0x0000000088
+#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090
+#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */
+#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */
+
+/*
+ * Global Registers (Not Channelized)
+ */
+
+#define A_BCM1480_PMI_GLB_0 0x0010056000
+#define A_BCM1480_PMO_GLB_0 0x0010057000
+
+/*
+ * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
+ */
+
+#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */
+
+#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
+
+/*
+ * Interrupt mapping registers
+ */
+
+
+#define A_BCM1480_PMI_INT_0 0x0010056800
+#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_INT_0 0x0010057800
+#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
+
+/*
+ * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
+ */
+
+#define R_BCM1480_PM_INT_ST 0x0000000000
+#define R_BCM1480_PM_INT_MSK 0x0000000040
+#define R_BCM1480_PM_INT_CLR 0x0000000080
+#define R_BCM1480_PM_MRGD_INT 0x00000000C0
+
+/*
+ * Debug registers (global)
+ */
+
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000
+#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8
+#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000
+#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8
+#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8
+
+/* *********************************************************************
+ * Switch performance counters
+ ********************************************************************* */
+
+#define A_BCM1480_SWPERF_CFG 0xdfb91800
+#define A_BCM1480_SWPERF_CNT0 0xdfb91880
+#define A_BCM1480_SWPERF_CNT1 0xdfb91888
+#define A_BCM1480_SWPERF_CNT2 0xdfb91890
+#define A_BCM1480_SWPERF_CNT3 0xdfb91898
+
+
+/* *********************************************************************
+ * Switch Trace Unit
+ ********************************************************************* */
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200
+#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208
+#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300
+#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400
+
+#define A_BCM1480_SWTRC_CFG 0xDFB91500
+#define A_BCM1480_SWTRC_READ 0xDFB91508
+
+#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8))
+#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8))
+#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8))
+
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16))
+
+
+
+/* *********************************************************************
+ * High-Speed Port Registers (Section 13)
+ ********************************************************************* */
+
+#define A_BCM1480_HSP_BASE_0 0x00DF810000
+#define A_BCM1480_HSP_BASE_1 0x00DF890000
+#define A_BCM1480_HSP_BASE_2 0x00DF910000
+#define BCM1480_HSP_REGISTER_SPACING 0x80000
+
+#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
+#define A_BCM1480_HSP_REGISTER(idx,reg) (A_BCM1480_HSP_BASE(idx) + (reg))
+
+#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000
+#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028
+
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208
+
+#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800
+#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808
+#define R_BCM1480_HSP_RX_TEST 0x0000000810
+#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818
+#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820
+#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828
+#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830
+#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838
+
+#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870
+
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
+
+/* XXX Following registers were shuffled. Renamed/renumbered per errata. */
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0
+
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
+
+#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0
+#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8
+#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100
+#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108
+#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110
+#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118
+#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120
+
+#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000
+#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008
+#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010
+
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078
+#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080
+#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0
+
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0
+#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8
+
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100
+#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108
+
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208
+
+#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800
+#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808
+#define R_BCM1480_HSP_TX_TEST 0x0000040810
+
+#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840
+#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848
+#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850
+#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860
+#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868
+#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870
+#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878
+
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888
+
+#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
+#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
+
+
+
+/* *********************************************************************
+ * Physical Address Map (Table 10 and Figure 7)
+ ********************************************************************* */
+
+#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
+#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
+#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
+#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000)
+#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000)
+#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000)
+#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000)
+#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000)
+#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000)
+#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000)
+#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000)
+#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000)
+#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024))
+#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000)
+#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000)
+#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000)
+
+
+/* *********************************************************************
+ * L2 Cache as RAM (Table 54)
+ ********************************************************************* */
+
+#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000)
+#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8
+#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000)
+#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000)
+#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000)
+#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000)
+#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000)
+#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000)
+#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000)
+
+#endif /* _BCM1480_REGS_H */
diff --git a/include/asm-mips/sibyte/bcm1480_scd.h b/include/asm-mips/sibyte/bcm1480_scd.h
new file mode 100644
index 0000000..648bed9
--- /dev/null
+++ b/include/asm-mips/sibyte/bcm1480_scd.h
@@ -0,0 +1,436 @@
+/* *********************************************************************
+ * BCM1280/BCM1400 Board Support Package
+ *
+ * SCD Constants and Macros File: bcm1480_scd.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the System Control and Debug module.
+ *
+ * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _BCM1480_SCD_H
+#define _BCM1480_SCD_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Pull in the BCM1250's SCD since lots of stuff is the same.
+ ********************************************************************* */
+
+#include "sb1250_scd.h"
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * This file is basically a "what's new" header file. Since the
+ * BCM1250 and the new BCM1480 (and derivatives) share many common
+ * features, this file contains only what's new or changed from
+ * the 1250. (above, you can see that we include the 1250 symbols
+ * to get the base functionality).
+ *
+ * In software, be sure to use the correct symbols, particularly
+ * for blocks that are different between the two chip families.
+ * All BCM1480-specific symbols have _BCM1480_ in their names,
+ * and all BCM1250-specific and "base" functions that are common in
+ * both chips have no special names (this is for compatibility with
+ * older include files). Therefore, if you're working with the
+ * SCD, which is very different on each chip, A_SCD_xxx implies
+ * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+ * version.
+ ********************************************************************* */
+
+/* *********************************************************************
+ * System control/debug registers
+ ********************************************************************* */
+
+/*
+ * System Identification and Revision Register (Table 12)
+ * Register: SCD_SYSTEM_REVISION
+ * This register is field compatible with the 1250.
+ */
+
+/*
+ * New part definitions
+ */
+
+#define K_SYS_PART_BCM1480 0x1406
+#define K_SYS_PART_BCM1280 0x1206
+#define K_SYS_PART_BCM1455 0x1407
+#define K_SYS_PART_BCM1255 0x1257
+
+/*
+ * Manufacturing Information Register (Table 14)
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+/*
+ * System Configuration Register (Table 15)
+ * Register: SCD_SYSTEM_CFG
+ * Entire register is different from 1250, all new constants below
+ */
+
+#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0)
+#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1)
+#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2)
+#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3)
+#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4)
+#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5)
+
+#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6)
+#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_PLL_DIV)
+#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_PLL_DIV)
+#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_PLL_DIV,M_BCM1480_SYS_PLL_DIV)
+
+#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11)
+#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_SW_DIV)
+#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_SW_DIV)
+#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_SW_DIV,M_BCM1480_SYS_SW_DIV)
+
+#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16)
+#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17)
+
+#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18)
+#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2,S_BCM1480_SYS_BOOT_MODE)
+#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_BOOT_MODE)
+#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x,S_BCM1480_SYS_BOOT_MODE,M_BCM1480_SYS_BOOT_MODE)
+#define K_BCM1480_SYS_BOOT_MODE_ROM32 0
+#define K_BCM1480_SYS_BOOT_MODE_ROM8 1
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3
+#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19)
+
+#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20)
+#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21)
+#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22)
+#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23)
+#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24)
+#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SYS_CONFIG 26
+#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6,S_BCM1480_SYS_CONFIG)
+#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_CONFIG)
+#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x,S_BCM1480_SYS_CONFIG,M_BCM1480_SYS_CONFIG)
+
+#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32,15)
+
+#define S_BCM1480_SYS_NODEID 47
+#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4,S_BCM1480_SYS_NODEID)
+#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_NODEID)
+#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x,S_BCM1480_SYS_NODEID,M_BCM1480_SYS_NODEID)
+
+#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51)
+#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52)
+#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53)
+#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54)
+#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55)
+#define S_BCM1480_SYS_DISABLECPU0 56
+#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
+#define S_BCM1480_SYS_DISABLECPU1 57
+#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
+#define S_BCM1480_SYS_DISABLECPU2 58
+#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
+#define S_BCM1480_SYS_DISABLECPU3 59
+#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
+
+#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60)
+#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61)
+#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62)
+#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63)
+
+/*
+ * Scratch Register (Table 16)
+ * Register: SCD_SYSTEM_SCRATCH
+ * Same as BCM1250
+ */
+
+
+/*
+ * Mailbox Registers (Table 17)
+ * Registers: SCD_MBOX_{0,1}_CPU_x
+ * Same as BCM1250
+ */
+
+
+/*
+ * See bcm1480_int.h for interrupt mapper registers.
+ */
+
+
+/*
+ * Watchdog Timer Initial Count Registers (Table 23)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ *
+ * The watchdogs are almost the same as the 1250, except
+ * the configuration register has more bits to control the
+ * other CPUs.
+ */
+
+
+/*
+ * Watchdog Timer Configuration Registers (Table 25)
+ * Registers: SCD_WDOG_CFG_x
+ */
+
+#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0)
+
+#define S_BCM1480_SCD_WDOG_RESET_TYPE 2
+#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5,S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE,M_BCM1480_SCD_WDOG_RESET_TYPE)
+
+#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */
+#define K_BCM1480_SCD_WDOG_RESET_SOFT 1
+#define K_BCM1480_SCD_WDOG_RESET_CPU0 3
+#define K_BCM1480_SCD_WDOG_RESET_CPU1 5
+#define K_BCM1480_SCD_WDOG_RESET_CPU2 9
+#define K_BCM1480_SCD_WDOG_RESET_CPU3 17
+#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31
+
+
+#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8)
+
+/*
+ * General Timer Initial Count Registers (Table 26)
+ * Registers: SCD_TIMER_INIT_x
+ *
+ * The timer registers are the same as the BCM1250
+ */
+
+
+/*
+ * ZBbus Count Register (Table 29)
+ * Register: ZBBUS_CYCLE_COUNT
+ *
+ * Same as BCM1250
+ */
+
+/*
+ * ZBbus Compare Registers (Table 30)
+ * Registers: ZBBUS_CYCLE_CPx
+ *
+ * Same as BCM1250
+ */
+
+
+/*
+ * System Performance Counter Configuration Register (Table 31)
+ * Register: PERF_CNT_CFG_0
+ *
+ * Since the clear/enable bits are moved compared to the
+ * 1250 and there are more fields, this register will be BCM1480 specific.
+ */
+
+#define S_BCM1480_SPC_CFG_SRC0 0
+#define M_BCM1480_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC0)
+#define V_BCM1480_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC0)
+#define G_BCM1480_SPC_CFG_SRC0(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC0,M_BCM1480_SPC_CFG_SRC0)
+
+#define S_BCM1480_SPC_CFG_SRC1 8
+#define M_BCM1480_SPC_CFG_SRC1 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC1)
+#define V_BCM1480_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC1)
+#define G_BCM1480_SPC_CFG_SRC1(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC1,M_BCM1480_SPC_CFG_SRC1)
+
+#define S_BCM1480_SPC_CFG_SRC2 16
+#define M_BCM1480_SPC_CFG_SRC2 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC2)
+#define V_BCM1480_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC2)
+#define G_BCM1480_SPC_CFG_SRC2(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC2,M_BCM1480_SPC_CFG_SRC2)
+
+#define S_BCM1480_SPC_CFG_SRC3 24
+#define M_BCM1480_SPC_CFG_SRC3 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC3)
+#define V_BCM1480_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC3)
+#define G_BCM1480_SPC_CFG_SRC3(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC3,M_BCM1480_SPC_CFG_SRC3)
+
+#define S_BCM1480_SPC_CFG_SRC4 32
+#define M_BCM1480_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC4)
+#define V_BCM1480_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC4)
+#define G_BCM1480_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC4,M_BCM1480_SPC_CFG_SRC4)
+
+#define S_BCM1480_SPC_CFG_SRC5 40
+#define M_BCM1480_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC5)
+#define V_BCM1480_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC5)
+#define G_BCM1480_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC5,M_BCM1480_SPC_CFG_SRC5)
+
+#define S_BCM1480_SPC_CFG_SRC6 48
+#define M_BCM1480_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC6)
+#define V_BCM1480_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC6)
+#define G_BCM1480_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC6,M_BCM1480_SPC_CFG_SRC6)
+
+#define S_BCM1480_SPC_CFG_SRC7 56
+#define M_BCM1480_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC7)
+#define V_BCM1480_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC7)
+#define G_BCM1480_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC7,M_BCM1480_SPC_CFG_SRC7)
+
+/*
+ * System Performance Counter Control Register (Table 32)
+ * Register: PERF_CNT_CFG_1
+ * BCM1480 specific
+ */
+
+#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0)
+#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1)
+
+/*
+ * System Performance Counters (Table 33)
+ * Registers: PERF_CNT_x
+ */
+
+#define S_BCM1480_SPC_CNT_COUNT 0
+#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40,S_BCM1480_SPC_CNT_COUNT)
+#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CNT_COUNT)
+#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x,S_BCM1480_SPC_CNT_COUNT,M_BCM1480_SPC_CNT_COUNT)
+
+#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40)
+
+
+/*
+ * Bus Watcher Error Status Register (Tables 36, 37)
+ * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher Error Data Registers (Table 38)
+ * Registers: BUS_ERR_DATA_x
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher L2 ECC Counter Register (Table 39)
+ * Register: BUS_L2_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Bus Watcher Memory and I/O Error Counter Register (Table 40)
+ * Register: BUS_MEM_IO_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Address Trap Registers
+ *
+ * Register layout same as BCM1250, almost. The bus agents
+ * are different, and the address trap configuration bits are
+ * slightly different.
+ */
+
+#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4,0)
+#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40,0)
+
+#define S_BCM1480_ATRAP_CFG_CNT 0
+#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3,S_BCM1480_ATRAP_CFG_CNT)
+#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CNT)
+#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CNT,M_BCM1480_ATRAP_CFG_CNT)
+
+#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3)
+#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4)
+#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5)
+#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6)
+#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7)
+
+#define S_BCM1480_ATRAP_CFG_AGENTID 8
+#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4,S_BCM1480_ATRAP_CFG_AGENTID)
+#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID)
+#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID,M_BCM1480_ATRAP_CFG_AGENTID)
+
+
+#define K_BCM1480_BUS_AGENT_CPU0 0
+#define K_BCM1480_BUS_AGENT_CPU1 1
+#define K_BCM1480_BUS_AGENT_NC 2
+#define K_BCM1480_BUS_AGENT_IOB 3
+#define K_BCM1480_BUS_AGENT_SCD 4
+#define K_BCM1480_BUS_AGENT_L2C 6
+#define K_BCM1480_BUS_AGENT_MC 7
+#define K_BCM1480_BUS_AGENT_CPU2 8
+#define K_BCM1480_BUS_AGENT_CPU3 9
+#define K_BCM1480_BUS_AGENT_PM 10
+
+#define S_BCM1480_ATRAP_CFG_CATTR 12
+#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2,S_BCM1480_ATRAP_CFG_CATTR)
+#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CATTR)
+#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CATTR,M_BCM1480_ATRAP_CFG_CATTR)
+
+#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0
+#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1
+#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2
+#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3
+
+#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14)
+
+
+/*
+ * Trace Event Registers (Table 47)
+ * Same as BCM1250.
+ */
+
+/*
+ * Trace Sequence Control Registers (Table 48)
+ * Registers: TRACE_SEQUENCE_x
+ *
+ * Same as BCM1250 except for two new fields.
+ */
+
+
+#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SCD_TRSEQ_SWFUNC 26
+#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2,S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC,M_BCM1480_SCD_TRSEQ_SWFUNC)
+
+/*
+ * Trace Control Register (Table 49)
+ * Register: TRACE_CFG
+ *
+ * Bits 0..8 are the same as the BCM1250, rest are different.
+ * Entire register is redefined below.
+ */
+
+#define M_BCM1480_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
+#define M_BCM1480_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
+#define M_BCM1480_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
+#define M_BCM1480_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3)
+#define M_BCM1480_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4)
+#define M_BCM1480_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5)
+#define M_BCM1480_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6)
+#define M_BCM1480_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7)
+#define M_BCM1480_SCD_TRACE_CFG_FORCE_CNT _SB_MAKEMASK1(8)
+
+#define S_BCM1480_SCD_TRACE_CFG_MODE 16
+#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE)
+#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE)
+#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE,M_BCM1480_SCD_TRACE_CFG_MODE)
+
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
+#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2
+
+#define S_BCM1480_SCD_TRACE_CFG_CUR_ADDR 24
+#define M_BCM1480_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+#define V_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+#define G_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR,M_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+
+#endif /* _BCM1480_SCD_H */
diff --git a/include/asm-mips/sibyte/bigsur.h b/include/asm-mips/sibyte/bigsur.h
new file mode 100644
index 0000000..ebefe79
--- /dev/null
+++ b/include/asm-mips/sibyte/bigsur.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_BIGSUR_H
+#define __ASM_SIBYTE_BIGSUR_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE 1
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS 3
+#define LEDS_PHYS 0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS 4
+#define IDE_PHYS 0x100b0000
+#define K_GPIO_GB_IDE 4
+#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS 6
+#define PCMCIA_PHYS 0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_BIGSUR_H */
+
diff --git a/include/asm-mips/sibyte/board.h b/include/asm-mips/sibyte/board.h
index d7b11b6..900edcb 100644
--- a/include/asm-mips/sibyte/board.h
+++ b/include/asm-mips/sibyte/board.h
@@ -21,8 +21,6 @@
#include <linux/config.h>
-#ifdef CONFIG_SIBYTE_BOARD
-
#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \
defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \
defined(CONFIG_SIBYTE_LITTLESUR)
@@ -37,6 +35,10 @@
#include <asm/sibyte/carmel.h>
#endif
+#ifdef CONFIG_SIBYTE_BIGSUR
+#include <asm/sibyte/bigsur.h>
+#endif
+
#ifdef __ASSEMBLY__
#ifdef LEDS_PHYS
@@ -54,16 +56,6 @@
#define setleds(t0,t1,c0,c1,c2,c3)
#endif /* LEDS_PHYS */
-#else
-
-#ifdef LEDS_PHYS
-extern void setleds(char *str);
-#else
-#define setleds(s) do { } while (0)
-#endif /* LEDS_PHYS */
-
#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_SIBYTE_BOARD */
-
#endif /* _SIBYTE_BOARD_H */
diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h
index d62da4e..a474c29 100644
--- a/include/asm-mips/sibyte/sb1250.h
+++ b/include/asm-mips/sibyte/sb1250.h
@@ -27,6 +27,9 @@
#define SB1250_NR_IRQS 64
+#define BCM1480_NR_IRQS 128
+#define BCM1480_NR_IRQS_HALF 64
+
#define SB1250_DUART_MINOR_BASE 64
#ifndef __ASSEMBLY__
@@ -35,6 +38,7 @@
/* For revision/pass information */
#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/bcm1480_scd.h>
extern unsigned int sb1_pass;
extern unsigned int soc_pass;
extern unsigned int soc_type;
@@ -46,6 +50,13 @@
extern void sb1250_mask_irq(int cpu, int irq);
extern void sb1250_unmask_irq(int cpu, int irq);
extern void sb1250_smp_finish(void);
+
+extern void bcm1480_time_init(void);
+extern unsigned long bcm1480_gettimeoffset(void);
+extern void bcm1480_mask_irq(int cpu, int irq);
+extern void bcm1480_unmask_irq(int cpu, int irq);
+extern void bcm1480_smp_finish(void);
+
extern void prom_printf(char *fmt, ...);
#define AT_spin \
@@ -58,6 +69,6 @@
#endif
-#define IOADDR(a) (IO_BASE + (a))
+#define IOADDR(a) ((volatile void __iomem *)(IO_BASE + (a)))
#endif
diff --git a/include/asm-mips/sibyte/sb1250_defs.h b/include/asm-mips/sibyte/sb1250_defs.h
index 40ef97c..335dbaf 100644
--- a/include/asm-mips/sibyte/sb1250_defs.h
+++ b/include/asm-mips/sibyte/sb1250_defs.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -97,13 +95,17 @@
* ordering, so be careful when adding support for new minor revs.
********************************************************************* */
-#define SIBYTE_HDR_FMASK_1250_ALL 0x00000ff
-#define SIBYTE_HDR_FMASK_1250_PASS1 0x0000001
-#define SIBYTE_HDR_FMASK_1250_PASS2 0x0000002
-#define SIBYTE_HDR_FMASK_1250_PASS3 0x0000004
+#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff
+#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001
+#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002
+#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004
-#define SIBYTE_HDR_FMASK_112x_ALL 0x0000f00
-#define SIBYTE_HDR_FMASK_112x_PASS1 0x0000100
+#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00
+#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100
+
+#define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000
+#define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000
+#define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000
/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */
#define SIBYTE_HDR_FMASK(chip, pass) \
@@ -111,8 +113,17 @@
#define SIBYTE_HDR_FMASK_ALLREVS(chip) \
(SIBYTE_HDR_FMASK_ ## chip ## _ALL)
+/* Default constant value for all chips, all revisions */
#define SIBYTE_HDR_FMASK_ALL \
+ (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
+ | SIBYTE_HDR_FMASK_1480_ALL)
+
+/* This one is used for the "original" BCM1250/BCM112x chips. We use this
+ to weed out constants and macros that do not exist on later chips like
+ the BCM1480 */
+#define SIBYTE_HDR_FMASK_1250_112x_ALL \
(SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL)
+#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL
#ifndef SIBYTE_HDR_FEATURES
#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL
@@ -133,6 +144,12 @@
#define SIBYTE_HDR_FEATURE_CHIP(chip) \
(!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES))
+/* True for all versions of the BCM1250 and BCM1125, but not true for
+ anything else */
+#define SIBYTE_HDR_FEATURE_1250_112x \
+ (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+/* (!! (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */
+
/* True if header features enabled for that rev or later, inclusive. */
#define SIBYTE_HDR_FEATURE(chip, pass) \
(!! ((SIBYTE_HDR_FMASK(chip, pass) \
diff --git a/include/asm-mips/sibyte/sb1250_dma.h b/include/asm-mips/sibyte/sb1250_dma.h
index 3cdb48f..e6145f5 100644
--- a/include/asm-mips/sibyte/sb1250_dma.h
+++ b/include/asm-mips/sibyte/sb1250_dma.h
@@ -7,9 +7,8 @@
* programming the SB1250's DMA controllers, both the data mover
* and the Ethernet DMA.
*
- * SB1250 specification level: User's manual 1/02/02
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: User's manual 10/21/02
+ * BCM1280 specification level: User's manual 11/24/03
*
*********************************************************************
*
@@ -58,17 +57,17 @@
#define M_DMA_RESERVED1 _SB_MAKEMASK1(2)
#define S_DMA_DESC_TYPE _SB_MAKE64(1)
-#define M_DMA_DESC_TYPE _SB_MAKE64(2,S_DMA_DESC_TYPE)
+#define M_DMA_DESC_TYPE _SB_MAKEMASK(2,S_DMA_DESC_TYPE)
#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x,S_DMA_DESC_TYPE)
#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x,S_DMA_DESC_TYPE,M_DMA_DESC_TYPE)
#define K_DMA_DESC_TYPE_RING_AL 0
#define K_DMA_DESC_TYPE_CHAIN_AL 1
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define K_DMA_DESC_TYPE_RING_UAL_WI 2
#define K_DMA_DESC_TYPE_RING_UAL_RMW 3
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3)
#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4)
@@ -111,11 +110,11 @@
#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4)
#define M_DMA_L2CA _SB_MAKEMASK1(5)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DMA_RX_XTRA_STATUS _SB_MAKEMASK1(6)
#define M_DMA_TX_CPU_PAUSE _SB_MAKEMASK1(6)
#define M_DMA_TX_FC_PAUSE_EN _SB_MAKEMASK1(7)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_MBZ1 _SB_MAKEMASK(6,15)
@@ -165,14 +164,14 @@
#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40)
#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16,S_DMA_CURDSCR_COUNT)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DMA_TX_CH_PAUSE_ON _SB_MAKEMASK1(56)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* Receive Packet Drop Registers
*/
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_OODLOST_RX _SB_MAKE64(0)
#define M_DMA_OODLOST_RX _SB_MAKEMASK(16,S_DMA_OODLOST_RX)
#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x,S_DMA_OODLOST_RX,M_DMA_OODLOST_RX)
@@ -180,7 +179,7 @@
#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16)
#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8,S_DMA_EOP_COUNT_RX)
#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x,S_DMA_EOP_COUNT_RX,M_DMA_EOP_COUNT_RX)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/* *********************************************************************
* DMA Descriptors
@@ -201,21 +200,21 @@
#define M_DMA_DSCRA_A_ADDR_OFFSET (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0)
#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40,S_DMA_DSCRA_A_ADDR_UA)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40)
#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9,S_DMA_DSCRA_A_SIZE)
#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x,S_DMA_DSCRA_A_SIZE)
#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x,S_DMA_DSCRA_A_SIZE,M_DMA_DSCRA_A_SIZE)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRA_DSCR_CNT _SB_MAKE64(40)
#define M_DMA_DSCRA_DSCR_CNT _SB_MAKEMASK(8,S_DMA_DSCRA_DSCR_CNT)
#define G_DMA_DSCRA_DSCR_CNT(x) _SB_GETVALUE(x,S_DMA_DSCRA_DSCR_CNT,M_DMA_DSCRA_DSCR_CNT)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49)
#define M_DMA_DSCRA_OFFSETB _SB_MAKEMASK1(50)
@@ -235,12 +234,12 @@
#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_OPTIONS)
#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x,S_DMA_DSCRB_OPTIONS,M_DMA_DSCRB_OPTIONS)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8)
#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14,S_DMA_DSCRB_A_SIZE)
#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_A_SIZE)
#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x,S_DMA_DSCRB_A_SIZE,M_DMA_DSCRB_A_SIZE)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10)
@@ -255,12 +254,12 @@
#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKE64(48)
#define M_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKEMASK(2,S_DMA_DSCRB_PKT_SIZE_MSB)
#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_PKT_SIZE_MSB)
#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x,S_DMA_DSCRB_PKT_SIZE_MSB,M_DMA_DSCRB_PKT_SIZE_MSB)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50)
#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14,S_DMA_DSCRB_PKT_SIZE)
@@ -282,15 +281,16 @@
#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51)
#define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
-/* Note: BADTCPCS is actually in DSCR_B options field */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: This bit is in the DSCR_B options field */
#define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: These bits are in the DSCR_B options field */
#define M_DMA_ETH_VLAN_FLAG _SB_MAKEMASK1(1)
#define M_DMA_ETH_CRC_FLAG _SB_MAKEMASK1(2)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_ETHRX_RXCH 53
#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2,S_DMA_ETHRX_RXCH)
@@ -438,7 +438,7 @@
M_DM_CUR_DSCR_DSCR_COUNT)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover Channel Partial Result Registers
* Register: DM_PARTIAL_0
@@ -459,10 +459,10 @@
M_DM_PARTIAL_TCPCS_PARTIAL)
#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover CRC Definition Registers
* Register: CRC_DEF_0
@@ -479,10 +479,10 @@
#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r,S_CRC_DEF_CRC_POLY)
#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r,S_CRC_DEF_CRC_POLY,\
M_CRC_DEF_CRC_POLY)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover CRC/Checksum Definition Registers
* Register: CTCP_DEF_0
@@ -511,7 +511,7 @@
#define K_CTCP_DEF_CRC_WIDTH_1 2
#define M_CTCP_DEF_CRC_BIT_ORDER _SB_MAKEMASK1(50)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
@@ -560,12 +560,12 @@
#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50)
#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DM_DSCRA_RD_BKOFF _SB_MAKEMASK1(52)
#define M_DM_DSCRA_WR_BKOFF _SB_MAKEMASK1(53)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54)
#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55)
#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56)
@@ -574,7 +574,7 @@
#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59)
#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60)
#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3,61)
diff --git a/include/asm-mips/sibyte/sb1250_genbus.h b/include/asm-mips/sibyte/sb1250_genbus.h
index f1f509f..1b5cbc5 100644
--- a/include/asm-mips/sibyte/sb1250_genbus.h
+++ b/include/asm-mips/sibyte/sb1250_genbus.h
@@ -6,9 +6,8 @@
* This module contains constants and macros useful for
* manipulating the SB1250's Generic Bus interface
*
- * SB1250 specification level: User's manual 1/02/02
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: User's manual 10/21/02
+ * BCM1280 specification level: User's Manual 11/14/03
*
*********************************************************************
*
@@ -51,19 +50,21 @@
#define M_IO_WIDTH_SEL _SB_MAKEMASK(2,S_IO_WIDTH_SEL)
#define K_IO_WIDTH_SEL_1 0
#define K_IO_WIDTH_SEL_2 1
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define K_IO_WIDTH_SEL_1L 2
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define K_IO_WIDTH_SEL_4 3
#define V_IO_WIDTH_SEL(x) _SB_MAKEVALUE(x,S_IO_WIDTH_SEL)
#define G_IO_WIDTH_SEL(x) _SB_GETVALUE(x,S_IO_WIDTH_SEL,M_IO_WIDTH_SEL)
#define S_IO_PARITY_ENA 4
#define M_IO_PARITY_ENA _SB_MAKEMASK1(S_IO_PARITY_ENA)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_IO_BURST_EN 5
#define M_IO_BURST_EN _SB_MAKEMASK1(S_IO_BURST_EN)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_PARITY_ODD 6
#define M_IO_PARITY_ODD _SB_MAKEMASK1(S_IO_PARITY_ODD)
#define S_IO_NONMUX 7
@@ -96,8 +97,11 @@
#define S_IO_ADDRBASE 16 /* # bits to shift addr for this reg */
+#define M_IO_BLK_CACHE _SB_MAKEMASK1(15)
+
+
/*
- * Generic Bus Region 0 Timing Registers (Table 11-7)
+ * Generic Bus Timing 0 Registers (Table 11-7)
*/
#define S_IO_ALE_WIDTH 0
@@ -105,21 +109,23 @@
#define V_IO_ALE_WIDTH(x) _SB_MAKEVALUE(x,S_IO_ALE_WIDTH)
#define G_IO_ALE_WIDTH(x) _SB_GETVALUE(x,S_IO_ALE_WIDTH,M_IO_ALE_WIDTH)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_EARLY_CS _SB_MAKEMASK1(3)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_ALE_TO_CS 4
#define M_IO_ALE_TO_CS _SB_MAKEMASK(2,S_IO_ALE_TO_CS)
#define V_IO_ALE_TO_CS(x) _SB_MAKEVALUE(x,S_IO_ALE_TO_CS)
#define G_IO_ALE_TO_CS(x) _SB_GETVALUE(x,S_IO_ALE_TO_CS,M_IO_ALE_TO_CS)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_IO_BURST_WIDTH _SB_MAKE64(6)
#define M_IO_BURST_WIDTH _SB_MAKEMASK(2,S_IO_BURST_WIDTH)
#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x,S_IO_BURST_WIDTH)
#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x,S_IO_BURST_WIDTH,M_IO_BURST_WIDTH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_CS_WIDTH 8
#define M_IO_CS_WIDTH _SB_MAKEMASK(5,S_IO_CS_WIDTH)
@@ -141,9 +147,10 @@
#define V_IO_ALE_TO_WRITE(x) _SB_MAKEVALUE(x,S_IO_ALE_TO_WRITE)
#define G_IO_ALE_TO_WRITE(x) _SB_GETVALUE(x,S_IO_ALE_TO_WRITE,M_IO_ALE_TO_WRITE)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_RDY_SYNC _SB_MAKEMASK1(3)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_WRITE_WIDTH 4
#define M_IO_WRITE_WIDTH _SB_MAKEMASK(4,S_IO_WRITE_WIDTH)
@@ -183,9 +190,127 @@
#define M_IO_TIMEOUT_INT _SB_MAKEMASK1(10)
#define M_IO_ILL_ADDR_INT _SB_MAKEMASK1(11)
#define M_IO_MULT_CS_INT _SB_MAKEMASK1(12)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_COH_ERR _SB_MAKEMASK1(14)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * Generic Bus Output Drive Control Register 0 (Table 14-18)
+ */
+
+#define S_IO_SLEW0 0
+#define M_IO_SLEW0 _SB_MAKEMASK(2,S_IO_SLEW0)
+#define V_IO_SLEW0(x) _SB_MAKEVALUE(x,S_IO_SLEW0)
+#define G_IO_SLEW0(x) _SB_GETVALUE(x,S_IO_SLEW0,M_IO_SLEW0)
+
+#define S_IO_DRV_A 2
+#define M_IO_DRV_A _SB_MAKEMASK(2,S_IO_DRV_A)
+#define V_IO_DRV_A(x) _SB_MAKEVALUE(x,S_IO_DRV_A)
+#define G_IO_DRV_A(x) _SB_GETVALUE(x,S_IO_DRV_A,M_IO_DRV_A)
+
+#define S_IO_DRV_B 6
+#define M_IO_DRV_B _SB_MAKEMASK(2,S_IO_DRV_B)
+#define V_IO_DRV_B(x) _SB_MAKEVALUE(x,S_IO_DRV_B)
+#define G_IO_DRV_B(x) _SB_GETVALUE(x,S_IO_DRV_B,M_IO_DRV_B)
+
+#define S_IO_DRV_C 10
+#define M_IO_DRV_C _SB_MAKEMASK(2,S_IO_DRV_C)
+#define V_IO_DRV_C(x) _SB_MAKEVALUE(x,S_IO_DRV_C)
+#define G_IO_DRV_C(x) _SB_GETVALUE(x,S_IO_DRV_C,M_IO_DRV_C)
+
+#define S_IO_DRV_D 14
+#define M_IO_DRV_D _SB_MAKEMASK(2,S_IO_DRV_D)
+#define V_IO_DRV_D(x) _SB_MAKEVALUE(x,S_IO_DRV_D)
+#define G_IO_DRV_D(x) _SB_GETVALUE(x,S_IO_DRV_D,M_IO_DRV_D)
+
+/*
+ * Generic Bus Output Drive Control Register 1 (Table 14-19)
+ */
+
+#define S_IO_DRV_E 2
+#define M_IO_DRV_E _SB_MAKEMASK(2,S_IO_DRV_E)
+#define V_IO_DRV_E(x) _SB_MAKEVALUE(x,S_IO_DRV_E)
+#define G_IO_DRV_E(x) _SB_GETVALUE(x,S_IO_DRV_E,M_IO_DRV_E)
+
+#define S_IO_DRV_F 6
+#define M_IO_DRV_F _SB_MAKEMASK(2,S_IO_DRV_F)
+#define V_IO_DRV_F(x) _SB_MAKEVALUE(x,S_IO_DRV_F)
+#define G_IO_DRV_F(x) _SB_GETVALUE(x,S_IO_DRV_F,M_IO_DRV_F)
+
+#define S_IO_SLEW1 8
+#define M_IO_SLEW1 _SB_MAKEMASK(2,S_IO_SLEW1)
+#define V_IO_SLEW1(x) _SB_MAKEVALUE(x,S_IO_SLEW1)
+#define G_IO_SLEW1(x) _SB_GETVALUE(x,S_IO_SLEW1,M_IO_SLEW1)
+
+#define S_IO_DRV_G 10
+#define M_IO_DRV_G _SB_MAKEMASK(2,S_IO_DRV_G)
+#define V_IO_DRV_G(x) _SB_MAKEVALUE(x,S_IO_DRV_G)
+#define G_IO_DRV_G(x) _SB_GETVALUE(x,S_IO_DRV_G,M_IO_DRV_G)
+
+#define S_IO_SLEW2 12
+#define M_IO_SLEW2 _SB_MAKEMASK(2,S_IO_SLEW2)
+#define V_IO_SLEW2(x) _SB_MAKEVALUE(x,S_IO_SLEW2)
+#define G_IO_SLEW2(x) _SB_GETVALUE(x,S_IO_SLEW2,M_IO_SLEW2)
+
+#define S_IO_DRV_H 14
+#define M_IO_DRV_H _SB_MAKEMASK(2,S_IO_DRV_H)
+#define V_IO_DRV_H(x) _SB_MAKEVALUE(x,S_IO_DRV_H)
+#define G_IO_DRV_H(x) _SB_GETVALUE(x,S_IO_DRV_H,M_IO_DRV_H)
+
+/*
+ * Generic Bus Output Drive Control Register 2 (Table 14-20)
+ */
+
+#define S_IO_DRV_J 2
+#define M_IO_DRV_J _SB_MAKEMASK(2,S_IO_DRV_J)
+#define V_IO_DRV_J(x) _SB_MAKEVALUE(x,S_IO_DRV_J)
+#define G_IO_DRV_J(x) _SB_GETVALUE(x,S_IO_DRV_J,M_IO_DRV_J)
+
+#define S_IO_DRV_K 6
+#define M_IO_DRV_K _SB_MAKEMASK(2,S_IO_DRV_K)
+#define V_IO_DRV_K(x) _SB_MAKEVALUE(x,S_IO_DRV_K)
+#define G_IO_DRV_K(x) _SB_GETVALUE(x,S_IO_DRV_K,M_IO_DRV_K)
+
+#define S_IO_DRV_L 10
+#define M_IO_DRV_L _SB_MAKEMASK(2,S_IO_DRV_L)
+#define V_IO_DRV_L(x) _SB_MAKEVALUE(x,S_IO_DRV_L)
+#define G_IO_DRV_L(x) _SB_GETVALUE(x,S_IO_DRV_L,M_IO_DRV_L)
+
+#define S_IO_DRV_M 14
+#define M_IO_DRV_M _SB_MAKEMASK(2,S_IO_DRV_M)
+#define V_IO_DRV_M(x) _SB_MAKEVALUE(x,S_IO_DRV_M)
+#define G_IO_DRV_M(x) _SB_GETVALUE(x,S_IO_DRV_M,M_IO_DRV_M)
+
+/*
+ * Generic Bus Output Drive Control Register 3 (Table 14-21)
+ */
+
+#define S_IO_SLEW3 0
+#define M_IO_SLEW3 _SB_MAKEMASK(2,S_IO_SLEW3)
+#define V_IO_SLEW3(x) _SB_MAKEVALUE(x,S_IO_SLEW3)
+#define G_IO_SLEW3(x) _SB_GETVALUE(x,S_IO_SLEW3,M_IO_SLEW3)
+
+#define S_IO_DRV_N 2
+#define M_IO_DRV_N _SB_MAKEMASK(2,S_IO_DRV_N)
+#define V_IO_DRV_N(x) _SB_MAKEVALUE(x,S_IO_DRV_N)
+#define G_IO_DRV_N(x) _SB_GETVALUE(x,S_IO_DRV_N,M_IO_DRV_N)
+
+#define S_IO_DRV_P 6
+#define M_IO_DRV_P _SB_MAKEMASK(2,S_IO_DRV_P)
+#define V_IO_DRV_P(x) _SB_MAKEVALUE(x,S_IO_DRV_P)
+#define G_IO_DRV_P(x) _SB_GETVALUE(x,S_IO_DRV_P,M_IO_DRV_P)
+
+#define S_IO_DRV_Q 10
+#define M_IO_DRV_Q _SB_MAKEMASK(2,S_IO_DRV_Q)
+#define V_IO_DRV_Q(x) _SB_MAKEVALUE(x,S_IO_DRV_Q)
+#define G_IO_DRV_Q(x) _SB_GETVALUE(x,S_IO_DRV_Q,M_IO_DRV_Q)
+
+#define S_IO_DRV_R 14
+#define M_IO_DRV_R _SB_MAKEMASK(2,S_IO_DRV_R)
+#define V_IO_DRV_R(x) _SB_MAKEVALUE(x,S_IO_DRV_R)
+#define G_IO_DRV_R(x) _SB_GETVALUE(x,S_IO_DRV_R,M_IO_DRV_R)
+
/*
* PCMCIA configuration register (Table 12-6)
@@ -202,6 +327,22 @@
#define M_PCMCIA_CFG_RDYMASK _SB_MAKEMASK1(8)
#define M_PCMCIA_CFG_PWRCTL _SB_MAKEMASK1(9)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_PCMCIA_MODE 16
+#define M_PCMCIA_MODE _SB_MAKEMASK(3,S_PCMCIA_MODE)
+#define V_PCMCIA_MODE(x) _SB_MAKEVALUE(x,S_PCMCIA_MODE)
+#define G_PCMCIA_MODE(x) _SB_GETVALUE(x,S_PCMCIA_MODE,M_PCMCIA_MODE)
+
+#define K_PCMCIA_MODE_PCMA_NOB 0 /* standard PCMCIA "A", no "B" */
+#define K_PCMCIA_MODE_IDEA_NOB 1 /* IDE "A", no "B" */
+#define K_PCMCIA_MODE_PCMIOA_NOB 2 /* PCMCIA with I/O "A", no "B" */
+#define K_PCMCIA_MODE_PCMA_PCMB 4 /* standard PCMCIA "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_IDEA_PCMB 5 /* IDE "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_PCMA_IDEB 6 /* standard PCMCIA "A", IDE "B" */
+#define K_PCMCIA_MODE_IDEA_IDEB 7 /* IDE "A", IDE "B" */
+#endif
+
+
/*
* PCMCIA status register (Table 12-7)
*/
@@ -272,5 +413,62 @@
#define V_GPIO_INTR_TYPE14(x) _SB_MAKEVALUE(x,S_GPIO_INTR_TYPE14)
#define G_GPIO_INTR_TYPE14(x) _SB_GETVALUE(x,S_GPIO_INTR_TYPE14,M_GPIO_INTR_TYPE14)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+
+/*
+ * GPIO Interrupt Additional Type Register
+ */
+
+#define K_GPIO_INTR_BOTHEDGE 0
+#define K_GPIO_INTR_RISEEDGE 1
+#define K_GPIO_INTR_UNPRED1 2
+#define K_GPIO_INTR_UNPRED2 3
+
+#define S_GPIO_INTR_ATYPEX(n) (((n)/2)*2)
+#define M_GPIO_INTR_ATYPEX(n) _SB_MAKEMASK(2,S_GPIO_INTR_ATYPEX(n))
+#define V_GPIO_INTR_ATYPEX(n,x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPEX(n))
+#define G_GPIO_INTR_ATYPEX(n,x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPEX(n),M_GPIO_INTR_ATYPEX(n))
+
+#define S_GPIO_INTR_ATYPE0 0
+#define M_GPIO_INTR_ATYPE0 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE0)
+#define V_GPIO_INTR_ATYPE0(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE0)
+#define G_GPIO_INTR_ATYPE0(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE0,M_GPIO_INTR_ATYPE0)
+
+#define S_GPIO_INTR_ATYPE2 2
+#define M_GPIO_INTR_ATYPE2 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE2)
+#define V_GPIO_INTR_ATYPE2(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE2)
+#define G_GPIO_INTR_ATYPE2(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE2,M_GPIO_INTR_ATYPE2)
+
+#define S_GPIO_INTR_ATYPE4 4
+#define M_GPIO_INTR_ATYPE4 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE4)
+#define V_GPIO_INTR_ATYPE4(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE4)
+#define G_GPIO_INTR_ATYPE4(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE4,M_GPIO_INTR_ATYPE4)
+
+#define S_GPIO_INTR_ATYPE6 6
+#define M_GPIO_INTR_ATYPE6 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE6)
+#define V_GPIO_INTR_ATYPE6(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE6)
+#define G_GPIO_INTR_ATYPE6(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE6,M_GPIO_INTR_ATYPE6)
+
+#define S_GPIO_INTR_ATYPE8 8
+#define M_GPIO_INTR_ATYPE8 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE8)
+#define V_GPIO_INTR_ATYPE8(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE8)
+#define G_GPIO_INTR_ATYPE8(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE8,M_GPIO_INTR_ATYPE8)
+
+#define S_GPIO_INTR_ATYPE10 10
+#define M_GPIO_INTR_ATYPE10 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE10)
+#define V_GPIO_INTR_ATYPE10(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE10)
+#define G_GPIO_INTR_ATYPE10(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE10,M_GPIO_INTR_ATYPE10)
+
+#define S_GPIO_INTR_ATYPE12 12
+#define M_GPIO_INTR_ATYPE12 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE12)
+#define V_GPIO_INTR_ATYPE12(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE12)
+#define G_GPIO_INTR_ATYPE12(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE12,M_GPIO_INTR_ATYPE12)
+
+#define S_GPIO_INTR_ATYPE14 14
+#define M_GPIO_INTR_ATYPE14 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE14)
+#define V_GPIO_INTR_ATYPE14(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE14)
+#define G_GPIO_INTR_ATYPE14(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE14,M_GPIO_INTR_ATYPE14)
+#endif
+
#endif
diff --git a/include/asm-mips/sibyte/sb1250_int.h b/include/asm-mips/sibyte/sb1250_int.h
index e173e2e..05c7b39 100644
--- a/include/asm-mips/sibyte/sb1250_int.h
+++ b/include/asm-mips/sibyte/sb1250_int.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -47,6 +45,10 @@
* First, the interrupt numbers.
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
+
+#define K_INT_SOURCES 64
+
#define K_INT_WATCHDOG_TIMER_0 0
#define K_INT_WATCHDOG_TIMER_1 1
#define K_INT_TIMER_0 2
@@ -244,4 +246,6 @@
#define M_LDTVECT_RAISEMBOX 0x40
+#endif /* 1250/112x */
+
#endif
diff --git a/include/asm-mips/sibyte/sb1250_l2c.h b/include/asm-mips/sibyte/sb1250_l2c.h
index 8afe8e0..842f205 100644
--- a/include/asm-mips/sibyte/sb1250_l2c.h
+++ b/include/asm-mips/sibyte/sb1250_l2c.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -89,8 +87,13 @@
#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x,S_L2C_MGMT_WAY)
#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x,S_L2C_MGMT_WAY,M_L2C_MGMT_WAY)
-#define S_L2C_MGMT_TAG 21
-#define M_L2C_MGMT_TAG _SB_MAKEMASK(6,S_L2C_MGMT_TAG)
+#define S_L2C_MGMT_ECC_DIAG 21
+#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2,S_L2C_MGMT_ECC_DIAG)
+#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x,S_L2C_MGMT_ECC_DIAG)
+#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x,S_L2C_MGMT_ECC_DIAG,M_L2C_MGMT_ECC_DIAG)
+
+#define S_L2C_MGMT_TAG 23
+#define M_L2C_MGMT_TAG _SB_MAKEMASK(4,S_L2C_MGMT_TAG)
#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x,S_L2C_MGMT_TAG)
#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x,S_L2C_MGMT_TAG,M_L2C_MGMT_TAG)
diff --git a/include/asm-mips/sibyte/sb1250_ldt.h b/include/asm-mips/sibyte/sb1250_ldt.h
index f2617de..7092535 100644
--- a/include/asm-mips/sibyte/sb1250_ldt.h
+++ b/include/asm-mips/sibyte/sb1250_ldt.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
diff --git a/include/asm-mips/sibyte/sb1250_mac.h b/include/asm-mips/sibyte/sb1250_mac.h
index 18e74e4..adfc688 100644
--- a/include/asm-mips/sibyte/sb1250_mac.h
+++ b/include/asm-mips/sibyte/sb1250_mac.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -81,7 +79,10 @@
#define M_MAC_RESERVED1 _SB_MAKEMASK(8,9)
#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17)
-#define M_MAC_RESERVED2 _SB_MAKEMASK1(18)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TIMESTAMP _SB_MAKEMASK1(18)
+#endif
#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19)
#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20)
#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21)
@@ -132,9 +133,9 @@
#define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44)
#endif /* 1250 PASS2 || 112x PASS1 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_MAC_BYPASS_IFG _SB_MAKE64(46)
#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8,S_MAC_BYPASS_IFG)
@@ -176,10 +177,22 @@
#define M_MAC_PORT_RESET _SB_MAKEMASK1(8)
+#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10)
#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11)
#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12)
#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13)
+#endif
+
+/*
+ * MAC reset information register (1280/1255)
+ */
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH0_PAUSE_ON _SB_MAKEMASK1(8)
+#define M_MAC_RX_CH1_PAUSE_ON _SB_MAKEMASK1(16)
+#define M_MAC_TX_CH0_PAUSE_ON _SB_MAKEMASK1(24)
+#define M_MAC_TX_CH1_PAUSE_ON _SB_MAKEMASK1(32)
+#endif
/*
* MAC DMA Control Register
@@ -267,12 +280,12 @@
#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x,S_MAC_IFG_RX)
#define G_MAC_IFG_RX(x) _SB_GETVALUE(x,S_MAC_IFG_RX,M_MAC_IFG_RX)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_MAC_PRE_LEN _SB_MAKE64(0)
#define M_MAC_PRE_LEN _SB_MAKEMASK(6,S_MAC_PRE_LEN)
#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x,S_MAC_PRE_LEN)
#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x,S_MAC_PRE_LEN,M_MAC_PRE_LEN)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_MAC_IFG_TX _SB_MAKE64(6)
#define M_MAC_IFG_TX _SB_MAKEMASK(6,S_MAC_IFG_TX)
@@ -458,9 +471,9 @@
#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x,S_MAC_COUNTER_ADDR)
#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x,S_MAC_COUNTER_ADDR,M_MAC_COUNTER_ADDR)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_TX_PAUSE_ON _SB_MAKEMASK1(52)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* MAC Fifo Pointer Registers (Table 9-19) [Debug register]
@@ -594,7 +607,7 @@
#define V_MAC_IPHDR_OFFSET(x) _SB_MAKEVALUE(x,S_MAC_IPHDR_OFFSET)
#define G_MAC_IPHDR_OFFSET(x) _SB_GETVALUE(x,S_MAC_IPHDR_OFFSET,M_MAC_IPHDR_OFFSET)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16)
#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8,S_MAC_RX_CRC_OFFSET)
#define V_MAC_RX_CRC_OFFSET(x) _SB_MAKEVALUE(x,S_MAC_RX_CRC_OFFSET)
@@ -612,7 +625,7 @@
#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8,S_MAC_RX_CH_MSN_SEL)
#define V_MAC_RX_CH_MSN_SEL(x) _SB_MAKEVALUE(x,S_MAC_RX_CH_MSN_SEL)
#define G_MAC_RX_CH_MSN_SEL(x) _SB_GETVALUE(x,S_MAC_RX_CH_MSN_SEL,M_MAC_RX_CH_MSN_SEL)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* MAC Receive Channel Select Registers (Table 9-25)
diff --git a/include/asm-mips/sibyte/sb1250_mc.h b/include/asm-mips/sibyte/sb1250_mc.h
index 1dd41c9..26e42149 100644
--- a/include/asm-mips/sibyte/sb1250_mc.h
+++ b/include/asm-mips/sibyte/sb1250_mc.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -324,6 +322,10 @@
#define K_MC_tRFC_DEFAULT 12
#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT)
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */
+#endif
+
#define S_MC_tCwCr 40
#define M_MC_tCwCr _SB_MAKEMASK(4,S_MC_tCwCr)
#define V_MC_tCwCr(x) _SB_MAKEVALUE(x,S_MC_tCwCr)
diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h
index 9db80cd..bab3a45 100644
--- a/include/asm-mips/sibyte/sb1250_regs.h
+++ b/include/asm-mips/sibyte/sb1250_regs.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: 01/02/2002
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -61,6 +59,8 @@
* XXX: can't remove MC base 0 if 112x, since it's used by other macros,
* since there is one reg there (but it could get its addr/offset constant).
*/
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define A_MC_BASE_0 0x0010051000
#define A_MC_BASE_1 0x0010052000
#define MC_REGISTER_SPACING 0x1000
@@ -101,10 +101,14 @@
#define R_MC_TEST_ECC 0x0000000420
#define R_MC_MCLK_CFG 0x0000000500
+#endif /* 1250 & 112x */
+
/* *********************************************************************
* L2 Cache Control Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */
+
#define A_L2_READ_TAG 0x0010040018
#define A_L2_ECC_TAG 0x0010040038
#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
@@ -125,13 +129,16 @@
#define A_L2_READ_ADDRESS A_L2_READ_TAG
#define A_L2_EEC_ADDRESS A_L2_ECC_TAG
+#endif
/* *********************************************************************
* PCI Interface Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */
#define A_PCI_TYPE00_HEADER 0x00DE000000
#define A_PCI_TYPE01_HEADER 0x00DE000800
+#endif
/* *********************************************************************
@@ -264,15 +271,15 @@
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define R_DUART_NUM_PORTS 2
#define A_DUART 0x0010060000
-#define A_DUART_REG(r)
-
#define DUART_CHANREG_SPACING 0x100
#define A_DUART_CHANREG(chan,reg) (A_DUART + DUART_CHANREG_SPACING*(chan) + (reg))
#define R_DUART_CHANREG(chan,reg) (DUART_CHANREG_SPACING*(chan) + (reg))
+#endif /* 1250 & 112x */
#define R_DUART_MODE_REG_1 0x100
#define R_DUART_MODE_REG_2 0x110
@@ -307,11 +314,13 @@
#define DUART_IMRISR_SPACING 0x20
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define R_DUART_IMRREG(chan) (R_DUART_IMR_A + (chan)*DUART_IMRISR_SPACING)
#define R_DUART_ISRREG(chan) (R_DUART_ISR_A + (chan)*DUART_IMRISR_SPACING)
#define A_DUART_IMRREG(chan) (A_DUART + R_DUART_IMRREG(chan))
#define A_DUART_ISRREG(chan) (A_DUART + R_DUART_ISRREG(chan))
+#endif /* 1250 & 112x */
@@ -368,6 +377,8 @@
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */
+
#define A_SER_BASE_0 0x0010060400
#define A_SER_BASE_1 0x0010060800
#define SER_SPACING 0x400
@@ -457,6 +468,8 @@
#define R_SER_RMON_RX_ERRORS 0x000001F0
#define R_SER_RMON_RX_BADADDR 0x000001F8
+#endif /* 1250/112x */
+
/* *********************************************************************
* Generic Bus Registers
********************************************************************* */
@@ -634,12 +647,13 @@
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define A_SCD_SCRATCH 0x0010020C10
+#endif /* 1250 PASS2 || 112x PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000
#define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00
#define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08
-#endif /* 1250 PASS2 || 112x PASS1 */
-
+#endif
/* *********************************************************************
* System Control Registers
@@ -667,15 +681,16 @@
#define A_ADDR_TRAP_CFG_1 0x0010020448
#define A_ADDR_TRAP_CFG_2 0x0010020450
#define A_ADDR_TRAP_CFG_3 0x0010020458
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define A_ADDR_TRAP_REG_DEBUG 0x0010020460
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/* *********************************************************************
* System Interrupt Mapper Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x
#define A_IMR_CPU0_BASE 0x0010020000
#define A_IMR_CPU1_BASE 0x0010022000
#define IMR_REGISTER_SPACING 0x2000
@@ -700,6 +715,7 @@
#define R_IMR_INTERRUPT_STATUS_COUNT 7
#define R_IMR_INTERRUPT_MAP_BASE 0x0200
#define R_IMR_INTERRUPT_MAP_COUNT 64
+#endif /* 1250/112x */
/* *********************************************************************
* System Performance Counter Registers
@@ -718,6 +734,7 @@
#define A_SCD_BUS_ERR_STATUS 0x0010020880
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0
+#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0
#endif /* 1250 PASS2 || 112x PASS1 */
#define A_BUS_ERR_DATA_0 0x00100208A0
#define A_BUS_ERR_DATA_1 0x00100208A8
@@ -798,6 +815,7 @@
* Physical Address Map
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x
#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
@@ -831,6 +849,7 @@
#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000)
#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000)
#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000)
+#endif
#endif
diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h
index dbbd682..a667bc1 100644
--- a/include/asm-mips/sibyte/sb1250_scd.h
+++ b/include/asm-mips/sibyte/sb1250_scd.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -51,26 +49,70 @@
#define V_SYS_REVISION(x) _SB_MAKEVALUE(x,S_SYS_REVISION)
#define G_SYS_REVISION(x) _SB_GETVALUE(x,S_SYS_REVISION,M_SYS_REVISION)
-#if SIBYTE_HDR_FEATURE_CHIP(1250)
-#define K_SYS_REVISION_BCM1250_PASS1 1
-#define K_SYS_REVISION_BCM1250_PASS2 3
-#define K_SYS_REVISION_BCM1250_A10 11
-#define K_SYS_REVISION_BCM1250_PASS2_2 16
-#define K_SYS_REVISION_BCM1250_B2 17
-#define K_SYS_REVISION_BCM1250_PASS3 32
-#define K_SYS_REVISION_BCM1250_C1 33
+#define K_SYS_REVISION_BCM1250_PASS1 0x01
+#define K_SYS_REVISION_BCM1250_PASS2 0x03
+#define K_SYS_REVISION_BCM1250_A1 0x03 /* Pass 2.0 WB */
+#define K_SYS_REVISION_BCM1250_A2 0x04 /* Pass 2.0 FC */
+#define K_SYS_REVISION_BCM1250_A3 0x05 /* Pass 2.1 FC */
+#define K_SYS_REVISION_BCM1250_A4 0x06 /* Pass 2.1 WB */
+#define K_SYS_REVISION_BCM1250_A6 0x07 /* OR 0x04 (A2) w/WID != 0 */
+#define K_SYS_REVISION_BCM1250_A8 0x0b /* A8/A10 */
+#define K_SYS_REVISION_BCM1250_A9 0x08
+#define K_SYS_REVISION_BCM1250_A10 K_SYS_REVISION_BCM1250_A8
+
+#define K_SYS_REVISION_BCM1250_PASS2_2 0x10
+#define K_SYS_REVISION_BCM1250_B0 K_SYS_REVISION_BCM1250_B1
+#define K_SYS_REVISION_BCM1250_B1 0x10
+#define K_SYS_REVISION_BCM1250_B2 0x11
+
+#define K_SYS_REVISION_BCM1250_C0 0x20
+#define K_SYS_REVISION_BCM1250_C1 0x21
+#define K_SYS_REVISION_BCM1250_C2 0x22
+#define K_SYS_REVISION_BCM1250_C3 0x23
+
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
/* XXX: discourage people from using these constants. */
#define K_SYS_REVISION_PASS1 K_SYS_REVISION_BCM1250_PASS1
#define K_SYS_REVISION_PASS2 K_SYS_REVISION_BCM1250_PASS2
#define K_SYS_REVISION_PASS2_2 K_SYS_REVISION_BCM1250_PASS2_2
#define K_SYS_REVISION_PASS3 K_SYS_REVISION_BCM1250_PASS3
+#define K_SYS_REVISION_BCM1250_PASS3 K_SYS_REVISION_BCM1250_C0
#endif /* 1250 */
-#if SIBYTE_HDR_FEATURE_CHIP(112x)
-#define K_SYS_REVISION_BCM112x_A1 32
-#define K_SYS_REVISION_BCM112x_A2 33
-#endif /* 112x */
+#define K_SYS_REVISION_BCM112x_A1 0x20
+#define K_SYS_REVISION_BCM112x_A2 0x21
+#define K_SYS_REVISION_BCM112x_A3 0x22
+#define K_SYS_REVISION_BCM112x_A4 0x23
+
+#define K_SYS_REVISION_BCM1480_S0 0x01
+#define K_SYS_REVISION_BCM1480_A1 0x02
+#define K_SYS_REVISION_BCM1480_A2 0x03
+#define K_SYS_REVISION_BCM1480_A3 0x04
+#define K_SYS_REVISION_BCM1480_B0 0x11
+
+/*Cache size - 23:20 of revision register*/
+#define S_SYS_L2C_SIZE _SB_MAKE64(20)
+#define M_SYS_L2C_SIZE _SB_MAKEMASK(4,S_SYS_L2C_SIZE)
+#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x,S_SYS_L2C_SIZE)
+#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x,S_SYS_L2C_SIZE,M_SYS_L2C_SIZE)
+
+#define K_SYS_L2C_SIZE_1MB 0
+#define K_SYS_L2C_SIZE_512KB 5
+#define K_SYS_L2C_SIZE_256KB 2
+#define K_SYS_L2C_SIZE_128KB 1
+
+#define K_SYS_L2C_SIZE_BCM1250 K_SYS_L2C_SIZE_512KB
+#define K_SYS_L2C_SIZE_BCM1125 K_SYS_L2C_SIZE_256KB
+#define K_SYS_L2C_SIZE_BCM1122 K_SYS_L2C_SIZE_128KB
+
+
+/* Number of CPU cores, bits 27:24 of revision register*/
+#define S_SYS_NUM_CPUS _SB_MAKE64(24)
+#define M_SYS_NUM_CPUS _SB_MAKEMASK(4,S_SYS_NUM_CPUS)
+#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x,S_SYS_NUM_CPUS)
+#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x,S_SYS_NUM_CPUS,M_SYS_NUM_CPUS)
+
/* XXX: discourage people from using these constants. */
#define S_SYS_PART _SB_MAKE64(16)
@@ -83,6 +125,8 @@
#define K_SYS_PART_BCM1120 0x1121
#define K_SYS_PART_BCM1125 0x1123
#define K_SYS_PART_BCM1125H 0x1124
+#define K_SYS_PART_BCM1122 0x1113
+
/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field. */
#define S_SYS_SOC_TYPE _SB_MAKE64(16)
@@ -96,6 +140,8 @@
#define K_SYS_SOC_TYPE_BCM1125 0x3
#define K_SYS_SOC_TYPE_BCM1125H 0x4
#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */
+#define K_SYS_SOC_TYPE_BCM1x80 0x6
+#define K_SYS_SOC_TYPE_BCM1x55 0x7
/*
* Calculate correct SOC type given a copy of system revision register.
@@ -127,10 +173,12 @@
#define V_SYS_WID(x) _SB_MAKEVALUE(x,S_SYS_WID)
#define G_SYS_WID(x) _SB_GETVALUE(x,S_SYS_WID,M_SYS_WID)
-/* System Manufacturing Register
-* Register: SCD_SYSTEM_MANUF
-*/
+/*
+ * System Manufacturing Register
+ * Register: SCD_SYSTEM_MANUF
+ */
+#if SIBYTE_HDR_FEATURE_1250_112x
/* Wafer ID: bits 31:0 */
#define S_SYS_WAFERID1_200 _SB_MAKE64(0)
#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32,S_SYS_WAFERID1_200)
@@ -139,8 +187,8 @@
#define S_SYS_BIN _SB_MAKE64(32)
#define M_SYS_BIN _SB_MAKEMASK(4,S_SYS_BIN)
-#define V_SYS_BIN _SB_MAKEVALUE(x,S_SYS_BIN)
-#define G_SYS_BIN _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN)
+#define V_SYS_BIN(x) _SB_MAKEVALUE(x,S_SYS_BIN)
+#define G_SYS_BIN(x) _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN)
/* Wafer ID: bits 39:36 */
#define S_SYS_WAFERID2_200 _SB_MAKE64(36)
@@ -163,12 +211,14 @@
#define M_SYS_YPOS _SB_MAKEMASK(6,S_SYS_YPOS)
#define V_SYS_YPOS(x) _SB_MAKEVALUE(x,S_SYS_YPOS)
#define G_SYS_YPOS(x) _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS)
+#endif
/*
* System Config Register (Table 4-2)
* Register: SCD_SYSTEM_CFG
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3)
#define M_SYS_PCI_SYNC_TEST_MODE _SB_MAKEMASK1(4)
#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5)
@@ -253,6 +303,8 @@
#define M_SYS_SW_FLAG _SB_MAKEMASK1(63)
#endif /* 1250 PASS2 || 112x PASS1 */
+#endif
+
/*
* Mailbox Registers (Table 4-3)
@@ -326,6 +378,7 @@
* System Performance Counters
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define S_SPC_CFG_SRC0 0
#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_SPC_CFG_SRC0)
#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC0)
@@ -348,6 +401,7 @@
#define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32)
#define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33)
+#endif
/*
@@ -412,6 +466,7 @@
* Address Trap Registers
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define M_ATRAP_INDEX _SB_MAKEMASK(4,0)
#define M_ATRAP_ADDRESS _SB_MAKEMASK(40,0)
@@ -436,7 +491,6 @@
#define K_BUS_AGENT_IOB0 2
#define K_BUS_AGENT_IOB1 3
#define K_BUS_AGENT_SCD 4
-#define K_BUS_AGENT_RESERVED 5
#define K_BUS_AGENT_L2C 6
#define K_BUS_AGENT_MC 7
@@ -454,10 +508,14 @@
#define K_ATRAP_CFG_CATTR_NOTNONCOH 6
#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7
+#endif /* 1250/112x */
+
/*
* Trace Buffer Config register
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
+
#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
@@ -475,6 +533,8 @@
#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR)
#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR,M_SCD_TRACE_CFG_CUR_ADDR)
+#endif /* 1250/112x */
+
/*
* Trace Event registers
*/
@@ -578,5 +638,7 @@
#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20)
#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21)
#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22)
+#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23)
+#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24)
#endif
diff --git a/include/asm-mips/sibyte/sb1250_smbus.h b/include/asm-mips/sibyte/sb1250_smbus.h
index 335c53e..279a912 100644
--- a/include/asm-mips/sibyte/sb1250_smbus.h
+++ b/include/asm-mips/sibyte/sb1250_smbus.h
@@ -6,9 +6,8 @@
* This module contains constants and macros useful for
* manipulating the SB1250's SMbus devices.
*
- * SB1250 specification level: 01/02/2002
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: 10/21/02
+ * BCM1280 specification level: 11/24/03
*
*********************************************************************
*
@@ -47,6 +46,7 @@
#define K_SMB_FREQ_400KHZ 0x1F
#define K_SMB_FREQ_100KHZ 0x7D
+#define K_SMB_FREQ_10KHZ 1250
#define S_SMB_CMD 0
#define M_SMB_CMD _SB_MAKEMASK(8,S_SMB_CMD)
@@ -58,7 +58,11 @@
#define M_SMB_ERR_INTR _SB_MAKEMASK1(0)
#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1)
-#define M_SMB_DATA_OUT _SB_MAKEMASK1(4)
+
+#define S_SMB_DATA_OUT 4
+#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT)
+#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x,S_SMB_DATA_OUT)
+
#define M_SMB_DATA_DIR _SB_MAKEMASK1(5)
#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR
#define M_SMB_CLK_OUT _SB_MAKEMASK1(6)
@@ -71,8 +75,23 @@
#define M_SMB_BUSY _SB_MAKEMASK1(0)
#define M_SMB_ERROR _SB_MAKEMASK1(1)
#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2)
-#define M_SMB_REF _SB_MAKEMASK1(6)
-#define M_SMB_DATA_IN _SB_MAKEMASK1(7)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SMB_SCL_IN 5
+#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN)
+#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x,S_SMB_SCL_IN)
+#define G_SMB_SCL_IN(x) _SB_GETVALUE(x,S_SMB_SCL_IN,M_SMB_SCL_IN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_SMB_REF 6
+#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF)
+#define V_SMB_REF(x) _SB_MAKEVALUE(x,S_SMB_REF)
+#define G_SMB_REF(x) _SB_GETVALUE(x,S_SMB_REF,M_SMB_REF)
+
+#define S_SMB_DATA_IN 7
+#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN)
+#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x,S_SMB_DATA_IN)
+#define G_SMB_DATA_IN(x) _SB_GETVALUE(x,S_SMB_DATA_IN,M_SMB_DATA_IN)
/*
* SMBus Start/Command registers (Table 14-9)
@@ -132,16 +151,14 @@
#define V_SPEC_MB(x) _SB_MAKEVALUE(x,S_SPEC_PEC)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_SMB_CMDH 8
-#define M_SMB_CMDH _SB_MAKEMASK(8,S_SMBH_CMD)
-#define V_SMB_CMDH(x) _SB_MAKEVALUE(x,S_SMBH_CMD)
+#define M_SMB_CMDH _SB_MAKEMASK(8,S_SMB_CMDH)
+#define V_SMB_CMDH(x) _SB_MAKEVALUE(x,S_SMB_CMDH)
#define M_SMB_EXTEND _SB_MAKEMASK1(14)
-#define M_SMB_DIR _SB_MAKEMASK1(13)
-
#define S_SMB_DFMT 8
#define M_SMB_DFMT _SB_MAKEMASK(3,S_SMB_DFMT)
#define V_SMB_DFMT(x) _SB_MAKEVALUE(x,S_SMB_DFMT)
@@ -165,6 +182,23 @@
#define V_SMB_DFMT_CMD5BYTE V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE)
#define V_SMB_DFMT_RESERVED V_SMB_DFMT(K_SMB_DFMT_RESERVED)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#define S_SMB_AFMT 11
+#define M_SMB_AFMT _SB_MAKEMASK(2,S_SMB_AFMT)
+#define V_SMB_AFMT(x) _SB_MAKEVALUE(x,S_SMB_AFMT)
+#define G_SMB_AFMT(x) _SB_GETVALUE(x,S_SMB_AFMT,M_SMB_AFMT)
+
+#define K_SMB_AFMT_NONE 0
+#define K_SMB_AFMT_ADDR 1
+#define K_SMB_AFMT_ADDR_CMD1BYTE 2
+#define K_SMB_AFMT_ADDR_CMD2BYTE 3
+
+#define V_SMB_AFMT_NONE V_SMB_AFMT(K_SMB_AFMT_NONE)
+#define V_SMB_AFMT_ADDR V_SMB_AFMT(K_SMB_AFMT_ADDR)
+#define V_SMB_AFMT_ADDR_CMD1BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE)
+#define V_SMB_AFMT_ADDR_CMD2BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE)
+
+#define M_SMB_DIR _SB_MAKEMASK1(13)
+
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#endif
diff --git a/include/asm-mips/sibyte/sb1250_syncser.h b/include/asm-mips/sibyte/sb1250_syncser.h
index fa2760d..dd154ac 100644
--- a/include/asm-mips/sibyte/sb1250_syncser.h
+++ b/include/asm-mips/sibyte/sb1250_syncser.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
diff --git a/include/asm-mips/sibyte/sb1250_uart.h b/include/asm-mips/sibyte/sb1250_uart.h
index 923ea4f..e87045e 100644
--- a/include/asm-mips/sibyte/sb1250_uart.h
+++ b/include/asm-mips/sibyte/sb1250_uart.h
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
@@ -240,7 +238,12 @@
*/
#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0)
-#define M_DUART_ISR_RX_A _SB_MAKEMASK1(1)
+
+#define S_DUART_ISR_RX_A 1
+#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A)
+#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x,S_DUART_ISR_RX_A)
+#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x,S_DUART_ISR_RX_A,M_DUART_ISR_RX_A)
+
#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2)
#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3)
#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4)
@@ -331,7 +334,7 @@
#define M_DUART_OUT_PIN_CLR(chan) \
(chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Full Interrupt Control Register
*/
@@ -345,7 +348,7 @@
#define M_DUART_INT_TIME _SB_MAKEMASK(4,S_DUART_INT_TIME)
#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x,S_DUART_INT_TIME)
#define G_DUART_INT_TIME(x) _SB_GETVALUE(x,S_DUART_INT_TIME,M_DUART_INT_TIME)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/* ********************************************************************** */
diff --git a/include/asm-mips/sibyte/swarm.h b/include/asm-mips/sibyte/swarm.h
index 97fa049..06e1d52 100644
--- a/include/asm-mips/sibyte/swarm.h
+++ b/include/asm-mips/sibyte/swarm.h
@@ -34,7 +34,7 @@
#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
#endif
#ifdef CONFIG_SIBYTE_LITTLESUR
-#define SIBYTE_BOARD_NAME "BCM1250C2 (LittleSur)"
+#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
#define SIBYTE_HAVE_PCMCIA 0
#define SIBYTE_HAVE_IDE 1
#define SIBYTE_DEFAULT_CONSOLE "cfe0"
diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h
index f7fbeba..8edabb0 100644
--- a/include/asm-mips/sigcontext.h
+++ b/include/asm-mips/sigcontext.h
@@ -27,14 +27,15 @@
unsigned int sc_fpc_csr;
unsigned int sc_fpc_eir; /* Unused */
unsigned int sc_used_math;
- unsigned int sc_ssflags; /* Unused */
+ unsigned int sc_dsp; /* dsp status, was sc_ssflags */
unsigned long long sc_mdhi;
unsigned long long sc_mdlo;
-
- unsigned int sc_cause; /* Unused */
- unsigned int sc_badvaddr; /* Unused */
-
- unsigned long sc_sigset[4]; /* kernel's sigset_t */
+ unsigned long sc_hi1; /* Was sc_cause */
+ unsigned long sc_lo1; /* Was sc_badvaddr */
+ unsigned long sc_hi2; /* Was sc_sigset[4] */
+ unsigned long sc_lo2;
+ unsigned long sc_hi3;
+ unsigned long sc_lo3;
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
@@ -48,19 +49,19 @@
* Warning: this structure illdefined with sc_badvaddr being just an unsigned
* int so it was changed to unsigned long in 2.6.0-test1. This may break
* binary compatibility - no prisoners.
+ * DSP ASE in 2.6.12-rc4. Turn sc_mdhi and sc_mdlo into an array of four
+ * entries, add sc_dsp and sc_reserved for padding. No prisoners.
*/
struct sigcontext {
unsigned long sc_regs[32];
unsigned long sc_fpregs[32];
- unsigned long sc_mdhi;
- unsigned long sc_mdlo;
+ unsigned long sc_hi[4];
+ unsigned long sc_lo[4];
unsigned long sc_pc;
- unsigned long sc_badvaddr;
- unsigned int sc_status;
unsigned int sc_fpc_csr;
- unsigned int sc_fpc_eir;
unsigned int sc_used_math;
- unsigned int sc_cause;
+ unsigned int sc_dsp;
+ unsigned int sc_reserved;
};
#ifdef __KERNEL__
@@ -68,23 +69,24 @@
#include <linux/posix_types.h>
struct sigcontext32 {
- __u32 sc_regmask; /* Unused */
- __u32 sc_status;
- __u64 sc_pc;
- __u64 sc_regs[32];
- __u64 sc_fpregs[32];
- __u32 sc_ownedfp; /* Unused */
- __u32 sc_fpc_csr;
- __u32 sc_fpc_eir; /* Unused */
- __u32 sc_used_math;
- __u32 sc_ssflags; /* Unused */
- __u64 sc_mdhi;
- __u64 sc_mdlo;
-
- __u32 sc_cause; /* Unused */
- __u32 sc_badvaddr; /* Unused */
-
- __u32 sc_sigset[4]; /* kernel's sigset_t */
+ __u32 sc_regmask; /* Unused */
+ __u32 sc_status;
+ __u64 sc_pc;
+ __u64 sc_regs[32];
+ __u64 sc_fpregs[32];
+ __u32 sc_ownedfp; /* Unused */
+ __u32 sc_fpc_csr;
+ __u32 sc_fpc_eir; /* Unused */
+ __u32 sc_used_math;
+ __u32 sc_dsp; /* dsp status, was sc_ssflags */
+ __u64 sc_mdhi;
+ __u64 sc_mdlo;
+ __u32 sc_hi1; /* Was sc_cause */
+ __u32 sc_lo1; /* Was sc_badvaddr */
+ __u32 sc_hi2; /* Was sc_sigset[4] */
+ __u32 sc_lo2;
+ __u32 sc_hi3;
+ __u32 sc_lo3;
};
#endif /* __KERNEL__ */
diff --git a/include/asm-mips/siginfo.h b/include/asm-mips/siginfo.h
index 698beca..2ba313d 100644
--- a/include/asm-mips/siginfo.h
+++ b/include/asm-mips/siginfo.h
@@ -11,6 +11,7 @@
#include <linux/config.h>
+#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int))
#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ... */
#define HAVE_ARCH_SIGINFO_T
diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h
index f2c470f..8ca539e 100644
--- a/include/asm-mips/signal.h
+++ b/include/asm-mips/signal.h
@@ -98,12 +98,39 @@
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
+ */
+#define SA_SAMPLE_RANDOM SA_RESTART
+
+#ifdef CONFIG_TRAD_SIGNALS
+#define sig_uses_siginfo(ka) ((ka)->sa.sa_flags & SA_SIGINFO)
+#else
+#define sig_uses_siginfo(ka) (1)
+#endif
+
+#endif /* __KERNEL__ */
+
#define SIG_BLOCK 1 /* for blocking signals */
#define SIG_UNBLOCK 2 /* for unblocking signals */
#define SIG_SETMASK 3 /* for setting the signal mask */
#define SIG_SETMASK32 256 /* Goodie from SGI for BSD compatibility:
set only the low 32 bit of the sigset. */
-#include <asm-generic/signal.h>
+
+/* Type of a signal handler. */
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+/* Fake signal functions */
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
struct sigaction {
unsigned int sa_flags;
diff --git a/include/asm-mips/sn/sn0/arch.h b/include/asm-mips/sn/sn0/arch.h
index 0e00dd4..fb78773 100644
--- a/include/asm-mips/sn/sn0/arch.h
+++ b/include/asm-mips/sn/sn0/arch.h
@@ -74,13 +74,8 @@
#define MAX_MEM_SLOTS 32 /* max slots per node */
#endif /* defined(N_MODE) */
-#if SABLE_RTL
-#define SLOT_SHIFT (28)
-#define SLOT_MIN_MEM_SIZE (16*1024*1024)
-#else
#define SLOT_SHIFT (27)
#define SLOT_MIN_MEM_SIZE (32*1024*1024)
-#endif
#define CPUS_PER_NODE 2 /* CPUs on a single hub */
#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */
diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h
index 753b662..0bb31e5 100644
--- a/include/asm-mips/socket.h
+++ b/include/asm-mips/socket.h
@@ -37,8 +37,6 @@
#define SO_ERROR 0x1007 /* get error status and clear */
#define SO_SNDBUF 0x1001 /* Send buffer size. */
#define SO_RCVBUF 0x1002 /* Receive buffer. */
-#define SO_SNDBUFFORCE 0x100a
-#define SO_RCVBUFFORCE 0x100b
#define SO_SNDLOWAT 0x1003 /* send low-water mark */
#define SO_RCVLOWAT 0x1004 /* receive low-water mark */
#define SO_SNDTIMEO 0x1005 /* send timeout */
@@ -69,6 +67,8 @@
#define SCM_TIMESTAMP SO_TIMESTAMP
#define SO_PEERSEC 30
+#define SO_SNDBUFFORCE 31
+#define SO_RCVBUFFORCE 33
#ifdef __KERNEL__
@@ -92,6 +92,7 @@
SOCK_RAW = 3,
SOCK_RDM = 4,
SOCK_SEQPACKET = 5,
+ SOCK_DCCP = 6,
SOCK_PACKET = 10,
};
diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h
index 4d0135b..669b8e3 100644
--- a/include/asm-mips/spinlock.h
+++ b/include/asm-mips/spinlock.h
@@ -9,17 +9,16 @@
#ifndef _ASM_SPINLOCK_H
#define _ASM_SPINLOCK_H
-#include <linux/config.h>
#include <asm/war.h>
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
*/
-#define __raw_spin_is_locked(x) ((x)->lock != 0)
+#define __raw_spin_is_locked(x) ((x)->lock != 0)
#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
#define __raw_spin_unlock_wait(x) \
- do { cpu_relax(); } while ((x)->lock)
+ do { cpu_relax(); } while ((x)->lock)
/*
* Simple spin lock operations. There are two variants, one clears IRQ's
@@ -119,6 +118,18 @@
* read-locks.
*/
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(rw) ((rw)->lock >= 0)
+
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(rw) (!(rw)->lock)
+
static inline void __raw_read_lock(raw_rwlock_t *rw)
{
unsigned int tmp;
@@ -197,8 +208,7 @@
" lui %1, 0x8000 \n"
" sc %1, %0 \n"
" beqzl %1, 1b \n"
- " nop \n"
- " sync \n"
+ " sync \n"
" .set reorder \n"
: "=m" (rw->lock), "=&r" (tmp)
: "m" (rw->lock)
@@ -211,8 +221,7 @@
" lui %1, 0x8000 \n"
" sc %1, %0 \n"
" beqz %1, 1b \n"
- " nop \n"
- " sync \n"
+ " sync \n"
" .set reorder \n"
: "=m" (rw->lock), "=&r" (tmp)
: "m" (rw->lock)
@@ -246,8 +255,7 @@
" lui %1, 0x8000 \n"
" sc %1, %0 \n"
" beqzl %1, 1b \n"
- " nop \n"
- " sync \n"
+ " sync \n"
" li %2, 1 \n"
" .set reorder \n"
"2: \n"
diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h
index 7b5e646..a8919dc 100644
--- a/include/asm-mips/stackframe.h
+++ b/include/asm-mips/stackframe.h
@@ -60,7 +60,6 @@
mfc0 k0, CP0_CONTEXT
lui k1, %hi(kernelsp)
srl k0, k0, 23
- sll k0, k0, 2
addu k1, k0
LONG_L k1, %lo(kernelsp)(k1)
#endif
@@ -76,9 +75,14 @@
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
MFC0 k1, CP0_CONTEXT
+ lui k0, %highest(kernelsp)
dsrl k1, 23
- dsll k1, k1, 3
- LONG_L k1, kernelsp(k1)
+ daddiu k0, %higher(kernelsp)
+ dsll k0, k0, 16
+ daddiu k0, %hi(kernelsp)
+ dsll k0, k0, 16
+ daddu k1, k1, k0
+ LONG_L k1, %lo(kernelsp)(k1)
#endif
.endm
@@ -86,25 +90,28 @@
#ifdef CONFIG_32BIT
mfc0 \temp, CP0_CONTEXT
srl \temp, 23
- sll \temp, 2
- LONG_S \stackp, kernelsp(\temp)
#endif
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
lw \temp, TI_CPU(gp)
dsll \temp, 3
- lui \temp2, %hi(kernelsp)
- daddu \temp, \temp2
- LONG_S \stackp, %lo(kernelsp)(\temp)
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
- lw \temp, TI_CPU(gp)
- dsll \temp, 3
- LONG_S \stackp, kernelsp(\temp)
+ MFC0 \temp, CP0_CONTEXT
+ dsrl \temp, 23
#endif
+ LONG_S \stackp, kernelsp(\temp)
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
+#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
+ lui k1, %highest(kernelsp)
+ daddiu k1, %higher(kernelsp)
+ dsll k1, k1, 16
+ daddiu k1, %hi(kernelsp)
+ dsll k1, k1, 16
+#else
lui k1, %hi(kernelsp)
+#endif
LONG_L k1, %lo(kernelsp)(k1)
.endm
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 6663efd..330c4e4 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -17,6 +17,7 @@
#include <asm/addrspace.h>
#include <asm/cpu-features.h>
+#include <asm/dsp.h>
#include <asm/ptrace.h>
#include <asm/war.h>
#include <asm/interrupt.h>
@@ -70,7 +71,7 @@
* does not enforce ordering, since there is no data dependency between
* the read of "a" and the read of "b". Therefore, on some CPUs, such
* as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like thiswhere there are no data dependencies.
+ * in cases like this where there are no data dependencies.
*/
#define read_barrier_depends() do { } while(0)
@@ -154,15 +155,15 @@
struct task_struct;
-#define switch_to(prev,next,last) \
-do { \
- (last) = resume(prev, next, next->thread_info); \
+#define switch_to(prev,next,last) \
+do { \
+ if (cpu_has_dsp) \
+ __save_dsp(prev); \
+ (last) = resume(prev, next, next->thread_info); \
+ if (cpu_has_dsp) \
+ __restore_dsp(current); \
} while(0)
-#define ROT_IN_PIECES \
- " .set noreorder \n" \
- " .set reorder \n"
-
static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
{
__u32 retval;
@@ -171,14 +172,17 @@
unsigned long dummy;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %3 # xchg_u32 \n"
+ " .set mips0 \n"
" move %2, %z4 \n"
+ " .set mips3 \n"
" sc %2, %1 \n"
" beqzl %2, 1b \n"
- ROT_IN_PIECES
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
@@ -186,13 +190,17 @@
unsigned long dummy;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: ll %0, %3 # xchg_u32 \n"
+ " .set mips0 \n"
" move %2, %z4 \n"
+ " .set mips3 \n"
" sc %2, %1 \n"
" beqz %2, 1b \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
@@ -217,14 +225,15 @@
unsigned long dummy;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %3 # xchg_u64 \n"
" move %2, %z4 \n"
" scd %2, %1 \n"
" beqzl %2, 1b \n"
- ROT_IN_PIECES
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
@@ -232,6 +241,7 @@
unsigned long dummy;
__asm__ __volatile__(
+ " .set mips3 \n"
"1: lld %0, %3 # xchg_u64 \n"
" move %2, %z4 \n"
" scd %2, %1 \n"
@@ -239,6 +249,7 @@
#ifdef CONFIG_SMP
" sync \n"
#endif
+ " .set mips0 \n"
: "=&r" (retval), "=m" (*m), "=&r" (dummy)
: "R" (*m), "Jr" (val)
: "memory");
@@ -286,34 +297,41 @@
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
+ " .set push \n"
" .set noat \n"
+ " .set mips3 \n"
"1: ll %0, %2 # __cmpxchg_u32 \n"
" bne %0, %z3, 2f \n"
+ " .set mips0 \n"
" move $1, %z4 \n"
+ " .set mips3 \n"
" sc $1, %1 \n"
" beqzl $1, 1b \n"
- ROT_IN_PIECES
#ifdef CONFIG_SMP
" sync \n"
#endif
"2: \n"
- " .set at \n"
+ " .set pop \n"
: "=&r" (retval), "=m" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set push \n"
" .set noat \n"
+ " .set mips3 \n"
"1: ll %0, %2 # __cmpxchg_u32 \n"
" bne %0, %z3, 2f \n"
+ " .set mips0 \n"
" move $1, %z4 \n"
+ " .set mips3 \n"
" sc $1, %1 \n"
" beqz $1, 1b \n"
#ifdef CONFIG_SMP
" sync \n"
#endif
"2: \n"
- " .set at \n"
+ " .set pop \n"
: "=&r" (retval), "=m" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
@@ -338,24 +356,27 @@
if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set push \n"
" .set noat \n"
+ " .set mips3 \n"
"1: lld %0, %2 # __cmpxchg_u64 \n"
" bne %0, %z3, 2f \n"
" move $1, %z4 \n"
" scd $1, %1 \n"
" beqzl $1, 1b \n"
- ROT_IN_PIECES
#ifdef CONFIG_SMP
" sync \n"
#endif
"2: \n"
- " .set at \n"
+ " .set pop \n"
: "=&r" (retval), "=m" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
__asm__ __volatile__(
+ " .set push \n"
" .set noat \n"
+ " .set mips3 \n"
"1: lld %0, %2 # __cmpxchg_u64 \n"
" bne %0, %z3, 2f \n"
" move $1, %z4 \n"
@@ -365,7 +386,7 @@
" sync \n"
#endif
"2: \n"
- " .set at \n"
+ " .set pop \n"
: "=&r" (retval), "=m" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
@@ -406,18 +427,20 @@
#define cmpxchg(ptr,old,new) ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(old), (unsigned long)(new),sizeof(*(ptr))))
+extern void set_handler (unsigned long offset, void *addr, unsigned long len);
+extern void set_uncached_handler (unsigned long offset, void *addr, unsigned long len);
+extern void *set_vi_handler (int n, void *addr);
+extern void *set_vi_srs_handler (int n, void *addr, int regset);
extern void *set_except_vector(int n, void *addr);
extern void per_cpu_trap_init(void);
-extern NORET_TYPE void __die(const char *, struct pt_regs *, const char *file,
- const char *func, unsigned long line);
-extern void __die_if_kernel(const char *, struct pt_regs *, const char *file,
- const char *func, unsigned long line);
+extern NORET_TYPE void die(const char *, struct pt_regs *);
-#define die(msg, regs) \
- __die(msg, regs, __FILE__ ":", __FUNCTION__, __LINE__)
-#define die_if_kernel(msg, regs) \
- __die_if_kernel(msg, regs, __FILE__ ":", __FUNCTION__, __LINE__)
+static inline void die_if_kernel(const char *str, struct pt_regs *regs)
+{
+ if (unlikely(!user_mode(regs)))
+ die(str, regs);
+}
extern int stop_a_enabled;
diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h
index a70cb08..e6c2447 100644
--- a/include/asm-mips/thread_info.h
+++ b/include/asm-mips/thread_info.h
@@ -26,6 +26,7 @@
struct task_struct *task; /* main task structure */
struct exec_domain *exec_domain; /* execution domain */
unsigned long flags; /* low level flags */
+ unsigned long tp_value; /* thread pointer */
__u32 cpu; /* current CPU */
int preempt_count; /* 0 => preemptable, <0 => BUG */
@@ -114,6 +115,7 @@
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */
+#define TIF_SECCOMP 5 /* secure computing */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
@@ -124,13 +126,14 @@
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_WORK_MASK 0x0000ffef /* work to do on
- interrupt/exception return */
-#define _TIF_ALLWORK_MASK 0x8000ffff /* work to do on any return to
- u-space */
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP)
#endif /* __KERNEL__ */
diff --git a/include/asm-mips/traps.h b/include/asm-mips/traps.h
index 1790122..d02e019 100644
--- a/include/asm-mips/traps.h
+++ b/include/asm-mips/traps.h
@@ -21,4 +21,7 @@
extern void (*board_be_init)(void);
extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+extern void (*board_nmi_handler_setup)(void);
+extern void (*board_ejtag_handler_setup)(void);
+
#endif /* _ASM_TRAPS_H */
diff --git a/include/asm-mips/tx4938/rbtx4938.h b/include/asm-mips/tx4938/rbtx4938.h
new file mode 100644
index 0000000..0fbedaf
--- /dev/null
+++ b/include/asm-mips/tx4938/rbtx4938.h
@@ -0,0 +1,207 @@
+/*
+ * linux/include/asm-mips/tx4938/rbtx4938.h
+ * Definitions for TX4937/TX4938
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TX_BOARDS_RBTX4938_H
+#define __ASM_TX_BOARDS_RBTX4938_H
+
+#include <asm/addrspace.h>
+#include <asm/tx4938/tx4938.h>
+
+/* CS */
+#define RBTX4938_CE0 0x1c000000 /* 64M */
+#define RBTX4938_CE2 0x17f00000 /* 1M */
+
+/* Address map */
+#define RBTX4938_FPGA_REG_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000000)
+#define RBTX4938_FPGA_REV_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000002)
+#define RBTX4938_CONFIG1_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000004)
+#define RBTX4938_CONFIG2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000006)
+#define RBTX4938_CONFIG3_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000008)
+#define RBTX4938_LED_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001000)
+#define RBTX4938_DIPSW_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001002)
+#define RBTX4938_BDIPSW_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001004)
+#define RBTX4938_IMASK_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002000)
+#define RBTX4938_IMASK2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002002)
+#define RBTX4938_INTPOL_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002004)
+#define RBTX4938_ISTAT_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002006)
+#define RBTX4938_ISTAT2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002008)
+#define RBTX4938_IMSTAT_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000200a)
+#define RBTX4938_IMSTAT2_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000200c)
+#define RBTX4938_SOFTINT_ADDR (KSEG1 + RBTX4938_CE2 + 0x00003000)
+#define RBTX4938_PIOSEL_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005000)
+#define RBTX4938_SPICS_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005002)
+#define RBTX4938_SFPWR_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005008)
+#define RBTX4938_SFVOL_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000500a)
+#define RBTX4938_SOFTRESET_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007000)
+#define RBTX4938_SOFTRESETLOCK_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007002)
+#define RBTX4938_PCIRESET_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007004)
+#define RBTX4938_ETHER_BASE (KSEG1 + RBTX4938_CE2 + 0x00020000)
+
+/* Ethernet port address (Jumperless Mode (W12:Open)) */
+#define RBTX4938_ETHER_ADDR (RBTX4938_ETHER_BASE + 0x280)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4938_INTB_PCID 0
+#define RBTX4938_INTB_PCIC 1
+#define RBTX4938_INTB_PCIB 2
+#define RBTX4938_INTB_PCIA 3
+#define RBTX4938_INTB_RTC 4
+#define RBTX4938_INTB_ATA 5
+#define RBTX4938_INTB_MODEM 6
+#define RBTX4938_INTB_SWINT 7
+#define RBTX4938_INTF_PCID (1 << RBTX4938_INTB_PCID)
+#define RBTX4938_INTF_PCIC (1 << RBTX4938_INTB_PCIC)
+#define RBTX4938_INTF_PCIB (1 << RBTX4938_INTB_PCIB)
+#define RBTX4938_INTF_PCIA (1 << RBTX4938_INTB_PCIA)
+#define RBTX4938_INTF_RTC (1 << RBTX4938_INTB_RTC)
+#define RBTX4938_INTF_ATA (1 << RBTX4938_INTB_ATA)
+#define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM)
+#define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT)
+
+#define rbtx4938_fpga_rev_ptr \
+ ((volatile unsigned char *)RBTX4938_FPGA_REV_ADDR)
+#define rbtx4938_led_ptr \
+ ((volatile unsigned char *)RBTX4938_LED_ADDR)
+#define rbtx4938_dipsw_ptr \
+ ((volatile unsigned char *)RBTX4938_DIPSW_ADDR)
+#define rbtx4938_bdipsw_ptr \
+ ((volatile unsigned char *)RBTX4938_BDIPSW_ADDR)
+#define rbtx4938_imask_ptr \
+ ((volatile unsigned char *)RBTX4938_IMASK_ADDR)
+#define rbtx4938_imask2_ptr \
+ ((volatile unsigned char *)RBTX4938_IMASK2_ADDR)
+#define rbtx4938_intpol_ptr \
+ ((volatile unsigned char *)RBTX4938_INTPOL_ADDR)
+#define rbtx4938_istat_ptr \
+ ((volatile unsigned char *)RBTX4938_ISTAT_ADDR)
+#define rbtx4938_istat2_ptr \
+ ((volatile unsigned char *)RBTX4938_ISTAT2_ADDR)
+#define rbtx4938_imstat_ptr \
+ ((volatile unsigned char *)RBTX4938_IMSTAT_ADDR)
+#define rbtx4938_imstat2_ptr \
+ ((volatile unsigned char *)RBTX4938_IMSTAT2_ADDR)
+#define rbtx4938_softint_ptr \
+ ((volatile unsigned char *)RBTX4938_SOFTINT_ADDR)
+#define rbtx4938_piosel_ptr \
+ ((volatile unsigned char *)RBTX4938_PIOSEL_ADDR)
+#define rbtx4938_spics_ptr \
+ ((volatile unsigned char *)RBTX4938_SPICS_ADDR)
+#define rbtx4938_sfpwr_ptr \
+ ((volatile unsigned char *)RBTX4938_SFPWR_ADDR)
+#define rbtx4938_sfvol_ptr \
+ ((volatile unsigned char *)RBTX4938_SFVOL_ADDR)
+#define rbtx4938_softreset_ptr \
+ ((volatile unsigned char *)RBTX4938_SOFTRESET_ADDR)
+#define rbtx4938_softresetlock_ptr \
+ ((volatile unsigned char *)RBTX4938_SOFTRESETLOCK_ADDR)
+#define rbtx4938_pcireset_ptr \
+ ((volatile unsigned char *)RBTX4938_PCIRESET_ADDR)
+
+/* SPI */
+#define RBTX4938_SEEPROM1_CHIPID 0
+#define RBTX4938_SEEPROM2_CHIPID 1
+#define RBTX4938_SEEPROM3_CHIPID 2
+#define RBTX4938_SRTC_CHIPID 3
+
+/*
+ * IRQ mappings
+ */
+
+#define RBTX4938_SOFT_INT0 0 /* not used */
+#define RBTX4938_SOFT_INT1 1 /* not used */
+#define RBTX4938_IRC_INT 2
+#define RBTX4938_TIMER_INT 7
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define RBTX4938_NR_IRQ_LOCAL 8
+#define RBTX4938_NR_IRQ_IRC 32 /* On-Chip IRC */
+#define RBTX4938_NR_IRQ_IOC 8
+
+#define MI8259_IRQ_ISA_RAW_BEG 0 /* optional backplane i8259 */
+#define MI8259_IRQ_ISA_RAW_END 15
+#define TX4938_IRQ_CP0_RAW_BEG 0 /* tx4938 cpu built-in cp0 */
+#define TX4938_IRQ_CP0_RAW_END 7
+#define TX4938_IRQ_PIC_RAW_BEG 0 /* tx4938 cpu build-in pic */
+#define TX4938_IRQ_PIC_RAW_END 31
+
+#define MI8259_IRQ_ISA_BEG MI8259_IRQ_ISA_RAW_BEG /* 0 */
+#define MI8259_IRQ_ISA_END MI8259_IRQ_ISA_RAW_END /* 15 */
+
+#define TX4938_IRQ_CP0_BEG ((MI8259_IRQ_ISA_END+1)+TX4938_IRQ_CP0_RAW_BEG) /* 16 */
+#define TX4938_IRQ_CP0_END ((MI8259_IRQ_ISA_END+1)+TX4938_IRQ_CP0_RAW_END) /* 23 */
+
+#define TX4938_IRQ_PIC_BEG ((TX4938_IRQ_CP0_END+1)+TX4938_IRQ_PIC_RAW_BEG) /* 24 */
+#define TX4938_IRQ_PIC_END ((TX4938_IRQ_CP0_END+1)+TX4938_IRQ_PIC_RAW_END) /* 55 */
+#define TX4938_IRQ_NEST_EXT_ON_PIC (TX4938_IRQ_PIC_BEG+2)
+#define TX4938_IRQ_NEST_PIC_ON_CP0 (TX4938_IRQ_CP0_BEG+2)
+#define TX4938_IRQ_USER0 (TX4938_IRQ_CP0_BEG+0)
+#define TX4938_IRQ_USER1 (TX4938_IRQ_CP0_BEG+1)
+#define TX4938_IRQ_CPU_TIMER (TX4938_IRQ_CP0_BEG+7)
+
+#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG 0
+#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_END 7
+
+#define TOSHIBA_RBTX4938_IRQ_IOC_BEG ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG) /* 56 */
+#define TOSHIBA_RBTX4938_IRQ_IOC_END ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_END) /* 63 */
+#define RBTX4938_IRQ_LOCAL TX4938_IRQ_CP0_BEG
+#define RBTX4938_IRQ_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_NR_IRQ_LOCAL)
+#define RBTX4938_IRQ_IOC (RBTX4938_IRQ_IRC + RBTX4938_NR_IRQ_IRC)
+#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
+
+#define RBTX4938_IRQ_LOCAL_SOFT0 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT0)
+#define RBTX4938_IRQ_LOCAL_SOFT1 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT1)
+#define RBTX4938_IRQ_LOCAL_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_IRC_INT)
+#define RBTX4938_IRQ_LOCAL_TIMER (RBTX4938_IRQ_LOCAL + RBTX4938_TIMER_INT)
+#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
+#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
+#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
+#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n))
+#define RBTX4938_IRQ_IRC_DMA(ch,n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch,n))
+#define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO)
+#define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC)
+#define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC)
+#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n))
+#define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC)
+#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR)
+#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME)
+#define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC)
+#define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME)
+#define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1)
+#define RBTX4938_IRQ_IRC_SPI (RBTX4938_IRQ_IRC + TX4938_IR_SPI)
+#define RBTX4938_IRQ_IOC_PCID (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID)
+#define RBTX4938_IRQ_IOC_PCIC (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC)
+#define RBTX4938_IRQ_IOC_PCIB (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB)
+#define RBTX4938_IRQ_IOC_PCIA (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA)
+#define RBTX4938_IRQ_IOC_RTC (RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC)
+#define RBTX4938_IRQ_IOC_ATA (RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA)
+#define RBTX4938_IRQ_IOC_MODEM (RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM)
+#define RBTX4938_IRQ_IOC_SWINT (RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT)
+
+
+/* IOC (PCI, etc) */
+#define RBTX4938_IRQ_IOCINT (TX4938_IRQ_NEST_EXT_ON_PIC)
+/* Onboard 10M Ether */
+#define RBTX4938_IRQ_ETHER (TX4938_IRQ_NEST_EXT_ON_PIC + 1)
+
+#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base)
+#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER)
+
+/* IRCR : Int. Control */
+#define TX4938_IRCR_LOW 0x00000000
+#define TX4938_IRCR_HIGH 0x00000001
+#define TX4938_IRCR_DOWN 0x00000002
+#define TX4938_IRCR_UP 0x00000003
+
+#endif /* __ASM_TX_BOARDS_RBTX4938_H */
diff --git a/include/asm-mips/tx4938/spi.h b/include/asm-mips/tx4938/spi.h
new file mode 100644
index 0000000..0dbbab8
--- /dev/null
+++ b/include/asm-mips/tx4938/spi.h
@@ -0,0 +1,74 @@
+/*
+ * linux/include/asm-mips/tx4938/spi.h
+ * Definitions for TX4937/TX4938 SPI
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TX_BOARDS_TX4938_SPI_H
+#define __ASM_TX_BOARDS_TX4938_SPI_H
+
+/* SPI */
+struct spi_dev_desc {
+ unsigned int baud;
+ unsigned short tcss, tcsh, tcsr; /* CS setup/hold/recovery time */
+ unsigned int byteorder:1; /* 0:LSB-First, 1:MSB-First */
+ unsigned int polarity:1; /* 0:High-Active */
+ unsigned int phase:1; /* 0:Sample-Then-Shift */
+};
+
+extern void txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on)) __init;
+extern void txx9_spi_irqinit(int irc_irq) __init;
+extern int txx9_spi_io(int chipid, struct spi_dev_desc *desc,
+ unsigned char **inbufs, unsigned int *incounts,
+ unsigned char **outbufs, unsigned int *outcounts,
+ int cansleep);
+extern int spi_eeprom_write_enable(int chipid, int enable);
+extern int spi_eeprom_read_status(int chipid);
+extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
+extern int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len);
+extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid) __init;
+
+#define TXX9_IMCLK (txx9_gbus_clock / 2)
+
+/*
+* SPI
+*/
+
+/* SPMCR : SPI Master Control */
+#define TXx9_SPMCR_OPMODE 0xc0
+#define TXx9_SPMCR_CONFIG 0x40
+#define TXx9_SPMCR_ACTIVE 0x80
+#define TXx9_SPMCR_SPSTP 0x02
+#define TXx9_SPMCR_BCLR 0x01
+
+/* SPCR0 : SPI Status */
+#define TXx9_SPCR0_TXIFL_MASK 0xc000
+#define TXx9_SPCR0_RXIFL_MASK 0x3000
+#define TXx9_SPCR0_SIDIE 0x0800
+#define TXx9_SPCR0_SOEIE 0x0400
+#define TXx9_SPCR0_RBSIE 0x0200
+#define TXx9_SPCR0_TBSIE 0x0100
+#define TXx9_SPCR0_IFSPSE 0x0010
+#define TXx9_SPCR0_SBOS 0x0004
+#define TXx9_SPCR0_SPHA 0x0002
+#define TXx9_SPCR0_SPOL 0x0001
+
+/* SPSR : SPI Status */
+#define TXx9_SPSR_TBSI 0x8000
+#define TXx9_SPSR_RBSI 0x4000
+#define TXx9_SPSR_TBS_MASK 0x3800
+#define TXx9_SPSR_RBS_MASK 0x0700
+#define TXx9_SPSR_SPOE 0x0080
+#define TXx9_SPSR_IFSD 0x0008
+#define TXx9_SPSR_SIDLE 0x0004
+#define TXx9_SPSR_STRDY 0x0002
+#define TXx9_SPSR_SRRDY 0x0001
+
+#endif /* __ASM_TX_BOARDS_TX4938_SPI_H */
diff --git a/include/asm-mips/tx4938/tx4938.h b/include/asm-mips/tx4938/tx4938.h
new file mode 100644
index 0000000..e25b1a0
--- /dev/null
+++ b/include/asm-mips/tx4938/tx4938.h
@@ -0,0 +1,706 @@
+/*
+ * linux/include/asm-mips/tx4938/tx4938.h
+ * Definitions for TX4937/TX4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TX_BOARDS_TX4938_H
+#define __ASM_TX_BOARDS_TX4938_H
+
+#include <asm/tx4938/tx4938_mips.h>
+
+#define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr))
+#define tx4938_write_nfmc(b,addr) (*(volatile unsigned int *)(addr)) = (b)
+
+#define TX4938_NR_IRQ_LOCAL TX4938_IRQ_PIC_BEG
+
+#define TX4938_IRQ_IRC_PCIC (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIC)
+#define TX4938_IRQ_IRC_PCIERR (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIERR)
+
+#define TX4938_PCIIO_0 0x10000000
+#define TX4938_PCIIO_1 0x01010000
+#define TX4938_PCIMEM_0 0x08000000
+#define TX4938_PCIMEM_1 0x11000000
+
+#define TX4938_PCIIO_SIZE_0 0x01000000
+#define TX4938_PCIIO_SIZE_1 0x00010000
+#define TX4938_PCIMEM_SIZE_0 0x08000000
+#define TX4938_PCIMEM_SIZE_1 0x00010000
+
+#define TX4938_REG_BASE 0xff1f0000 /* == TX4937_REG_BASE */
+#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */
+
+/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */
+#define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000)
+#define TX4938_SRAMC_REG (TX4938_REG_BASE + 0x6000)
+#define TX4938_PCIC1_REG (TX4938_REG_BASE + 0x7000)
+#define TX4938_SDRAMC_REG (TX4938_REG_BASE + 0x8000)
+#define TX4938_EBUSC_REG (TX4938_REG_BASE + 0x9000)
+#define TX4938_DMA_REG(ch) (TX4938_REG_BASE + 0xb000 + (ch) * 0x800)
+#define TX4938_PCIC_REG (TX4938_REG_BASE + 0xd000)
+#define TX4938_CCFG_REG (TX4938_REG_BASE + 0xe000)
+#define TX4938_NR_TMR 3
+#define TX4938_TMR_REG(ch) ((TX4938_REG_BASE + 0xf000) + (ch) * 0x100)
+#define TX4938_NR_SIO 2
+#define TX4938_SIO_REG(ch) ((TX4938_REG_BASE + 0xf300) + (ch) * 0x100)
+#define TX4938_PIO_REG (TX4938_REG_BASE + 0xf500)
+#define TX4938_IRC_REG (TX4938_REG_BASE + 0xf600)
+#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700)
+#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800)
+
+#ifndef _LANGUAGE_ASSEMBLY
+#include <asm/byteorder.h>
+
+#define TX4938_MKA(x) ((u32)( ((u32)(TX4938_REG_BASE)) | ((u32)(x)) ))
+
+#define TX4938_RD08( reg ) (*(vu08*)(reg))
+#define TX4938_WR08( reg, val ) ((*(vu08*)(reg))=(val))
+
+#define TX4938_RD16( reg ) (*(vu16*)(reg))
+#define TX4938_WR16( reg, val ) ((*(vu16*)(reg))=(val))
+
+#define TX4938_RD32( reg ) (*(vu32*)(reg))
+#define TX4938_WR32( reg, val ) ((*(vu32*)(reg))=(val))
+
+#define TX4938_RD64( reg ) (*(vu64*)(reg))
+#define TX4938_WR64( reg, val ) ((*(vu64*)(reg))=(val))
+
+#define TX4938_RD( reg ) TX4938_RD32( reg )
+#define TX4938_WR( reg, val ) TX4938_WR32( reg, val )
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __ASSEMBLY__
+#define _CONST64(c) c
+#else
+#define _CONST64(c) c##ull
+
+#include <asm/byteorder.h>
+
+#ifdef __BIG_ENDIAN
+#define endian_def_l2(e1,e2) \
+ volatile unsigned long e1,e2
+#define endian_def_s2(e1,e2) \
+ volatile unsigned short e1,e2
+#define endian_def_sb2(e1,e2,e3) \
+ volatile unsigned short e1;volatile unsigned char e2,e3
+#define endian_def_b2s(e1,e2,e3) \
+ volatile unsigned char e1,e2;volatile unsigned short e3
+#define endian_def_b4(e1,e2,e3,e4) \
+ volatile unsigned char e1,e2,e3,e4
+#else
+#define endian_def_l2(e1,e2) \
+ volatile unsigned long e2,e1
+#define endian_def_s2(e1,e2) \
+ volatile unsigned short e2,e1
+#define endian_def_sb2(e1,e2,e3) \
+ volatile unsigned char e3,e2;volatile unsigned short e1
+#define endian_def_b2s(e1,e2,e3) \
+ volatile unsigned short e3;volatile unsigned char e2,e1
+#define endian_def_b4(e1,e2,e3,e4) \
+ volatile unsigned char e4,e3,e2,e1
+#endif
+
+
+struct tx4938_sdramc_reg {
+ volatile unsigned long long cr[4];
+ volatile unsigned long long unused0[4];
+ volatile unsigned long long tr;
+ volatile unsigned long long unused1[2];
+ volatile unsigned long long cmd;
+ volatile unsigned long long sfcmd;
+};
+
+struct tx4938_ebusc_reg {
+ volatile unsigned long long cr[8];
+};
+
+struct tx4938_dma_reg {
+ struct tx4938_dma_ch_reg {
+ volatile unsigned long long cha;
+ volatile unsigned long long sar;
+ volatile unsigned long long dar;
+ endian_def_l2(unused0, cntr);
+ endian_def_l2(unused1, sair);
+ endian_def_l2(unused2, dair);
+ endian_def_l2(unused3, ccr);
+ endian_def_l2(unused4, csr);
+ } ch[4];
+ volatile unsigned long long dbr[8];
+ volatile unsigned long long tdhr;
+ volatile unsigned long long midr;
+ endian_def_l2(unused0, mcr);
+};
+
+struct tx4938_pcic_reg {
+ volatile unsigned long pciid;
+ volatile unsigned long pcistatus;
+ volatile unsigned long pciccrev;
+ volatile unsigned long pcicfg1;
+ volatile unsigned long p2gm0plbase; /* +10 */
+ volatile unsigned long p2gm0pubase;
+ volatile unsigned long p2gm1plbase;
+ volatile unsigned long p2gm1pubase;
+ volatile unsigned long p2gm2pbase; /* +20 */
+ volatile unsigned long p2giopbase;
+ volatile unsigned long unused0;
+ volatile unsigned long pcisid;
+ volatile unsigned long unused1; /* +30 */
+ volatile unsigned long pcicapptr;
+ volatile unsigned long unused2;
+ volatile unsigned long pcicfg2;
+ volatile unsigned long g2ptocnt; /* +40 */
+ volatile unsigned long unused3[15];
+ volatile unsigned long g2pstatus; /* +80 */
+ volatile unsigned long g2pmask;
+ volatile unsigned long pcisstatus;
+ volatile unsigned long pcimask;
+ volatile unsigned long p2gcfg; /* +90 */
+ volatile unsigned long p2gstatus;
+ volatile unsigned long p2gmask;
+ volatile unsigned long p2gccmd;
+ volatile unsigned long unused4[24]; /* +a0 */
+ volatile unsigned long pbareqport; /* +100 */
+ volatile unsigned long pbacfg;
+ volatile unsigned long pbastatus;
+ volatile unsigned long pbamask;
+ volatile unsigned long pbabm; /* +110 */
+ volatile unsigned long pbacreq;
+ volatile unsigned long pbacgnt;
+ volatile unsigned long pbacstate;
+ volatile unsigned long long g2pmgbase[3]; /* +120 */
+ volatile unsigned long long g2piogbase;
+ volatile unsigned long g2pmmask[3]; /* +140 */
+ volatile unsigned long g2piomask;
+ volatile unsigned long long g2pmpbase[3]; /* +150 */
+ volatile unsigned long long g2piopbase;
+ volatile unsigned long pciccfg; /* +170 */
+ volatile unsigned long pcicstatus;
+ volatile unsigned long pcicmask;
+ volatile unsigned long unused5;
+ volatile unsigned long long p2gmgbase[3]; /* +180 */
+ volatile unsigned long long p2giogbase;
+ volatile unsigned long g2pcfgadrs; /* +1a0 */
+ volatile unsigned long g2pcfgdata;
+ volatile unsigned long unused6[8];
+ volatile unsigned long g2pintack;
+ volatile unsigned long g2pspc;
+ volatile unsigned long unused7[12]; /* +1d0 */
+ volatile unsigned long long pdmca; /* +200 */
+ volatile unsigned long long pdmga;
+ volatile unsigned long long pdmpa;
+ volatile unsigned long long pdmctr;
+ volatile unsigned long long pdmcfg; /* +220 */
+ volatile unsigned long long pdmsts;
+};
+
+struct tx4938_aclc_reg {
+ volatile unsigned long acctlen;
+ volatile unsigned long acctldis;
+ volatile unsigned long acregacc;
+ volatile unsigned long unused0;
+ volatile unsigned long acintsts;
+ volatile unsigned long acintmsts;
+ volatile unsigned long acinten;
+ volatile unsigned long acintdis;
+ volatile unsigned long acsemaph;
+ volatile unsigned long unused1[7];
+ volatile unsigned long acgpidat;
+ volatile unsigned long acgpodat;
+ volatile unsigned long acslten;
+ volatile unsigned long acsltdis;
+ volatile unsigned long acfifosts;
+ volatile unsigned long unused2[11];
+ volatile unsigned long acdmasts;
+ volatile unsigned long acdmasel;
+ volatile unsigned long unused3[6];
+ volatile unsigned long acaudodat;
+ volatile unsigned long acsurrdat;
+ volatile unsigned long accentdat;
+ volatile unsigned long aclfedat;
+ volatile unsigned long acaudiat;
+ volatile unsigned long unused4;
+ volatile unsigned long acmodoat;
+ volatile unsigned long acmodidat;
+ volatile unsigned long unused5[15];
+ volatile unsigned long acrevid;
+};
+
+
+struct tx4938_tmr_reg {
+ volatile unsigned long tcr;
+ volatile unsigned long tisr;
+ volatile unsigned long cpra;
+ volatile unsigned long cprb;
+ volatile unsigned long itmr;
+ volatile unsigned long unused0[3];
+ volatile unsigned long ccdr;
+ volatile unsigned long unused1[3];
+ volatile unsigned long pgmr;
+ volatile unsigned long unused2[3];
+ volatile unsigned long wtmr;
+ volatile unsigned long unused3[43];
+ volatile unsigned long trr;
+};
+
+struct tx4938_sio_reg {
+ volatile unsigned long lcr;
+ volatile unsigned long dicr;
+ volatile unsigned long disr;
+ volatile unsigned long cisr;
+ volatile unsigned long fcr;
+ volatile unsigned long flcr;
+ volatile unsigned long bgr;
+ volatile unsigned long tfifo;
+ volatile unsigned long rfifo;
+};
+
+struct tx4938_pio_reg {
+ volatile unsigned long dout;
+ volatile unsigned long din;
+ volatile unsigned long dir;
+ volatile unsigned long od;
+ volatile unsigned long flag[2];
+ volatile unsigned long pol;
+ volatile unsigned long intc;
+ volatile unsigned long maskcpu;
+ volatile unsigned long maskext;
+};
+struct tx4938_irc_reg {
+ volatile unsigned long cer;
+ volatile unsigned long cr[2];
+ volatile unsigned long unused0;
+ volatile unsigned long ilr[8];
+ volatile unsigned long unused1[4];
+ volatile unsigned long imr;
+ volatile unsigned long unused2[7];
+ volatile unsigned long scr;
+ volatile unsigned long unused3[7];
+ volatile unsigned long ssr;
+ volatile unsigned long unused4[7];
+ volatile unsigned long csr;
+};
+
+struct tx4938_ndfmc_reg {
+ endian_def_l2(unused0, dtr);
+ endian_def_l2(unused1, mcr);
+ endian_def_l2(unused2, sr);
+ endian_def_l2(unused3, isr);
+ endian_def_l2(unused4, imr);
+ endian_def_l2(unused5, spr);
+ endian_def_l2(unused6, rstr);
+};
+
+struct tx4938_spi_reg {
+ volatile unsigned long mcr;
+ volatile unsigned long cr0;
+ volatile unsigned long cr1;
+ volatile unsigned long fs;
+ volatile unsigned long unused1;
+ volatile unsigned long sr;
+ volatile unsigned long dr;
+ volatile unsigned long unused2;
+};
+
+struct tx4938_sramc_reg {
+ volatile unsigned long long cr;
+};
+
+struct tx4938_ccfg_reg {
+ volatile unsigned long long ccfg;
+ volatile unsigned long long crir;
+ volatile unsigned long long pcfg;
+ volatile unsigned long long tear;
+ volatile unsigned long long clkctr;
+ volatile unsigned long long unused0;
+ volatile unsigned long long garbc;
+ volatile unsigned long long unused1;
+ volatile unsigned long long unused2;
+ volatile unsigned long long ramp;
+ volatile unsigned long long unused3;
+ volatile unsigned long long jmpadr;
+};
+
+#undef endian_def_l2
+#undef endian_def_s2
+#undef endian_def_sb2
+#undef endian_def_b2s
+#undef endian_def_b4
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * NDFMC
+ */
+
+/* NDFMCR : NDFMC Mode Control */
+#define TX4938_NDFMCR_WE 0x80
+#define TX4938_NDFMCR_ECC_ALL 0x60
+#define TX4938_NDFMCR_ECC_RESET 0x60
+#define TX4938_NDFMCR_ECC_READ 0x40
+#define TX4938_NDFMCR_ECC_ON 0x20
+#define TX4938_NDFMCR_ECC_OFF 0x00
+#define TX4938_NDFMCR_CE 0x10
+#define TX4938_NDFMCR_BSPRT 0x04
+#define TX4938_NDFMCR_ALE 0x02
+#define TX4938_NDFMCR_CLE 0x01
+
+/* NDFMCR : NDFMC Status */
+#define TX4938_NDFSR_BUSY 0x80
+
+/* NDFMCR : NDFMC Reset */
+#define TX4938_NDFRSTR_RST 0x01
+
+/*
+ * IRC
+ */
+
+#define TX4938_IR_ECCERR 0
+#define TX4938_IR_WTOERR 1
+#define TX4938_NUM_IR_INT 6
+#define TX4938_IR_INT(n) (2 + (n))
+#define TX4938_NUM_IR_SIO 2
+#define TX4938_IR_SIO(n) (8 + (n))
+#define TX4938_NUM_IR_DMA 4
+#define TX4938_IR_DMA(ch,n) ((ch ? 27 : 10) + (n)) /* 10-13,27-30 */
+#define TX4938_IR_PIO 14
+#define TX4938_IR_PDMAC 15
+#define TX4938_IR_PCIC 16
+#define TX4938_NUM_IR_TMR 3
+#define TX4938_IR_TMR(n) (17 + (n))
+#define TX4938_IR_NDFMC 21
+#define TX4938_IR_PCIERR 22
+#define TX4938_IR_PCIPME 23
+#define TX4938_IR_ACLC 24
+#define TX4938_IR_ACLCPME 25
+#define TX4938_IR_PCIC1 26
+#define TX4938_IR_SPI 31
+#define TX4938_NUM_IR 32
+/* multiplex */
+#define TX4938_IR_ETH0 TX4938_IR_INT(4)
+#define TX4938_IR_ETH1 TX4938_IR_INT(3)
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4938_CCFG_WDRST _CONST64(0x0000020000000000)
+#define TX4938_CCFG_WDREXEN _CONST64(0x0000010000000000)
+#define TX4938_CCFG_BCFG_MASK _CONST64(0x000000ff00000000)
+#define TX4938_CCFG_TINTDIS 0x01000000
+#define TX4938_CCFG_PCI66 0x00800000
+#define TX4938_CCFG_PCIMODE 0x00400000
+#define TX4938_CCFG_PCI1_66 0x00200000
+#define TX4938_CCFG_DIVMODE_MASK 0x001e0000
+#define TX4938_CCFG_DIVMODE_2 (0x4 << 17)
+#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17)
+#define TX4938_CCFG_DIVMODE_3 (0x5 << 17)
+#define TX4938_CCFG_DIVMODE_4 (0x6 << 17)
+#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17)
+#define TX4938_CCFG_DIVMODE_8 (0x0 << 17)
+#define TX4938_CCFG_DIVMODE_10 (0xb << 17)
+#define TX4938_CCFG_DIVMODE_12 (0x1 << 17)
+#define TX4938_CCFG_DIVMODE_16 (0x2 << 17)
+#define TX4938_CCFG_DIVMODE_18 (0x9 << 17)
+#define TX4938_CCFG_BEOW 0x00010000
+#define TX4938_CCFG_WR 0x00008000
+#define TX4938_CCFG_TOE 0x00004000
+#define TX4938_CCFG_PCIXARB 0x00002000
+#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00
+#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10)
+#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5 (0x5 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5_5 (0x7 << 10)
+#define TX4938_CCFG_PCIDIVMODE_8 (0x0 << 10)
+#define TX4938_CCFG_PCIDIVMODE_9 (0x2 << 10)
+#define TX4938_CCFG_PCIDIVMODE_10 (0x4 << 10)
+#define TX4938_CCFG_PCIDIVMODE_11 (0x6 << 10)
+#define TX4938_CCFG_PCI1DMD 0x00000100
+#define TX4938_CCFG_SYSSP_MASK 0x000000c0
+#define TX4938_CCFG_ENDIAN 0x00000004
+#define TX4938_CCFG_HALT 0x00000002
+#define TX4938_CCFG_ACEHOLD 0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX4938_PCFG_ETH0_SEL _CONST64(0x8000000000000000)
+#define TX4938_PCFG_ETH1_SEL _CONST64(0x4000000000000000)
+#define TX4938_PCFG_ATA_SEL _CONST64(0x2000000000000000)
+#define TX4938_PCFG_ISA_SEL _CONST64(0x1000000000000000)
+#define TX4938_PCFG_SPI_SEL _CONST64(0x0800000000000000)
+#define TX4938_PCFG_NDF_SEL _CONST64(0x0400000000000000)
+#define TX4938_PCFG_SDCLKDLY_MASK 0x30000000
+#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28)
+#define TX4938_PCFG_SYSCLKEN 0x08000000
+#define TX4938_PCFG_SDCLKEN_ALL 0x07800000
+#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch))
+#define TX4938_PCFG_PCICLKEN_ALL 0x003f0000
+#define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
+#define TX4938_PCFG_SEL2 0x00000200
+#define TX4938_PCFG_SEL1 0x00000100
+#define TX4938_PCFG_DMASEL_ALL 0x0000000f
+#define TX4938_PCFG_DMASEL0_DRQ0 0x00000000
+#define TX4938_PCFG_DMASEL0_SIO1 0x00000001
+#define TX4938_PCFG_DMASEL1_DRQ1 0x00000000
+#define TX4938_PCFG_DMASEL1_SIO1 0x00000002
+#define TX4938_PCFG_DMASEL2_DRQ2 0x00000000
+#define TX4938_PCFG_DMASEL2_SIO0 0x00000004
+#define TX4938_PCFG_DMASEL3_DRQ3 0x00000000
+#define TX4938_PCFG_DMASEL3_SIO0 0x00000008
+
+/* CLKCTR : Clock Control */
+#define TX4938_CLKCTR_NDFCKD _CONST64(0x0001000000000000)
+#define TX4938_CLKCTR_NDFRST _CONST64(0x0000000100000000)
+#define TX4938_CLKCTR_ETH1CKD 0x80000000
+#define TX4938_CLKCTR_ETH0CKD 0x40000000
+#define TX4938_CLKCTR_SPICKD 0x20000000
+#define TX4938_CLKCTR_SRAMCKD 0x10000000
+#define TX4938_CLKCTR_PCIC1CKD 0x08000000
+#define TX4938_CLKCTR_DMA1CKD 0x04000000
+#define TX4938_CLKCTR_ACLCKD 0x02000000
+#define TX4938_CLKCTR_PIOCKD 0x01000000
+#define TX4938_CLKCTR_DMACKD 0x00800000
+#define TX4938_CLKCTR_PCICKD 0x00400000
+#define TX4938_CLKCTR_TM0CKD 0x00100000
+#define TX4938_CLKCTR_TM1CKD 0x00080000
+#define TX4938_CLKCTR_TM2CKD 0x00040000
+#define TX4938_CLKCTR_SIO0CKD 0x00020000
+#define TX4938_CLKCTR_SIO1CKD 0x00010000
+#define TX4938_CLKCTR_ETH1RST 0x00008000
+#define TX4938_CLKCTR_ETH0RST 0x00004000
+#define TX4938_CLKCTR_SPIRST 0x00002000
+#define TX4938_CLKCTR_SRAMRST 0x00001000
+#define TX4938_CLKCTR_PCIC1RST 0x00000800
+#define TX4938_CLKCTR_DMA1RST 0x00000400
+#define TX4938_CLKCTR_ACLRST 0x00000200
+#define TX4938_CLKCTR_PIORST 0x00000100
+#define TX4938_CLKCTR_DMARST 0x00000080
+#define TX4938_CLKCTR_PCIRST 0x00000040
+#define TX4938_CLKCTR_TM0RST 0x00000010
+#define TX4938_CLKCTR_TM1RST 0x00000008
+#define TX4938_CLKCTR_TM2RST 0x00000004
+#define TX4938_CLKCTR_SIO0RST 0x00000002
+#define TX4938_CLKCTR_SIO1RST 0x00000001
+
+/* bits for G2PSTATUS/G2PMASK */
+#define TX4938_PCIC_G2PSTATUS_ALL 0x00000003
+#define TX4938_PCIC_G2PSTATUS_TTOE 0x00000002
+#define TX4938_PCIC_G2PSTATUS_RTOE 0x00000001
+
+/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */
+#define TX4938_PCIC_PCISTATUS_ALL 0x0000f900
+
+/* bits for PBACFG */
+#define TX4938_PCIC_PBACFG_FIXPA 0x00000008
+#define TX4938_PCIC_PBACFG_RPBA 0x00000004
+#define TX4938_PCIC_PBACFG_PBAEN 0x00000002
+#define TX4938_PCIC_PBACFG_BMCEN 0x00000001
+
+/* bits for G2PMnGBASE */
+#define TX4938_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000)
+#define TX4938_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000)
+
+/* bits for G2PIOGBASE */
+#define TX4938_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000)
+#define TX4938_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000)
+
+/* bits for PCICSTATUS/PCICMASK */
+#define TX4938_PCIC_PCICSTATUS_ALL 0x000007b8
+#define TX4938_PCIC_PCICSTATUS_PME 0x00000400
+#define TX4938_PCIC_PCICSTATUS_TLB 0x00000200
+#define TX4938_PCIC_PCICSTATUS_NIB 0x00000100
+#define TX4938_PCIC_PCICSTATUS_ZIB 0x00000080
+#define TX4938_PCIC_PCICSTATUS_PERR 0x00000020
+#define TX4938_PCIC_PCICSTATUS_SERR 0x00000010
+#define TX4938_PCIC_PCICSTATUS_GBE 0x00000008
+#define TX4938_PCIC_PCICSTATUS_IWB 0x00000002
+#define TX4938_PCIC_PCICSTATUS_E2PDONE 0x00000001
+
+/* bits for PCICCFG */
+#define TX4938_PCIC_PCICCFG_GBWC_MASK 0x0fff0000
+#define TX4938_PCIC_PCICCFG_HRST 0x00000800
+#define TX4938_PCIC_PCICCFG_SRST 0x00000400
+#define TX4938_PCIC_PCICCFG_IRBER 0x00000200
+#define TX4938_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch))
+#define TX4938_PCIC_PCICCFG_G2PM0EN 0x00000100
+#define TX4938_PCIC_PCICCFG_G2PM1EN 0x00000080
+#define TX4938_PCIC_PCICCFG_G2PM2EN 0x00000040
+#define TX4938_PCIC_PCICCFG_G2PIOEN 0x00000020
+#define TX4938_PCIC_PCICCFG_TCAR 0x00000010
+#define TX4938_PCIC_PCICCFG_ICAEN 0x00000008
+
+/* bits for P2GMnGBASE */
+#define TX4938_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000)
+#define TX4938_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000)
+#define TX4938_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000)
+
+/* bits for P2GIOGBASE */
+#define TX4938_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000)
+#define TX4938_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000)
+#define TX4938_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000)
+
+#define TX4938_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11)
+#define TX4938_PCIC_MAX_DEVNU TX4938_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/* bits for PDMCFG */
+#define TX4938_PCIC_PDMCFG_RSTFIFO 0x00200000
+#define TX4938_PCIC_PDMCFG_EXFER 0x00100000
+#define TX4938_PCIC_PDMCFG_REQDLY_MASK 0x00003800
+#define TX4938_PCIC_PDMCFG_REQDLY_NONE (0 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_16 (1 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_32 (2 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_64 (3 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_128 (4 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_256 (5 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_512 (6 << 11)
+#define TX4938_PCIC_PDMCFG_REQDLY_1024 (7 << 11)
+#define TX4938_PCIC_PDMCFG_ERRIE 0x00000400
+#define TX4938_PCIC_PDMCFG_NCCMPIE 0x00000200
+#define TX4938_PCIC_PDMCFG_NTCMPIE 0x00000100
+#define TX4938_PCIC_PDMCFG_CHNEN 0x00000080
+#define TX4938_PCIC_PDMCFG_XFRACT 0x00000040
+#define TX4938_PCIC_PDMCFG_BSWAP 0x00000020
+#define TX4938_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c
+#define TX4938_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000
+#define TX4938_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004
+#define TX4938_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008
+#define TX4938_PCIC_PDMCFG_XFRDIRC 0x00000002
+#define TX4938_PCIC_PDMCFG_CHRST 0x00000001
+
+/* bits for PDMSTS */
+#define TX4938_PCIC_PDMSTS_REQCNT_MASK 0x3f000000
+#define TX4938_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000
+#define TX4938_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000
+#define TX4938_PCIC_PDMSTS_FIFORP_MASK 0x00030000
+#define TX4938_PCIC_PDMSTS_ERRINT 0x00000800
+#define TX4938_PCIC_PDMSTS_DONEINT 0x00000400
+#define TX4938_PCIC_PDMSTS_CHNEN 0x00000200
+#define TX4938_PCIC_PDMSTS_XFRACT 0x00000100
+#define TX4938_PCIC_PDMSTS_ACCMP 0x00000080
+#define TX4938_PCIC_PDMSTS_NCCMP 0x00000040
+#define TX4938_PCIC_PDMSTS_NTCMP 0x00000020
+#define TX4938_PCIC_PDMSTS_CFGERR 0x00000008
+#define TX4938_PCIC_PDMSTS_PCIERR 0x00000004
+#define TX4938_PCIC_PDMSTS_CHNERR 0x00000002
+#define TX4938_PCIC_PDMSTS_DATAERR 0x00000001
+#define TX4938_PCIC_PDMSTS_ALL_CMP 0x000000e0
+#define TX4938_PCIC_PDMSTS_ALL_ERR 0x0000000f
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX4938_DMA_MCR_EIS(ch) (0x10000000<<(ch))
+#define TX4938_DMA_MCR_DIS(ch) (0x01000000<<(ch))
+#define TX4938_DMA_MCR_RSFIF 0x00000080
+#define TX4938_DMA_MCR_FIFUM(ch) (0x00000008<<(ch))
+#define TX4938_DMA_MCR_RPRT 0x00000002
+#define TX4938_DMA_MCR_MSTEN 0x00000001
+
+/* bits for CCRn */
+#define TX4938_DMA_CCR_IMMCHN 0x20000000
+#define TX4938_DMA_CCR_USEXFSZ 0x10000000
+#define TX4938_DMA_CCR_LE 0x08000000
+#define TX4938_DMA_CCR_DBINH 0x04000000
+#define TX4938_DMA_CCR_SBINH 0x02000000
+#define TX4938_DMA_CCR_CHRST 0x01000000
+#define TX4938_DMA_CCR_RVBYTE 0x00800000
+#define TX4938_DMA_CCR_ACKPOL 0x00400000
+#define TX4938_DMA_CCR_REQPL 0x00200000
+#define TX4938_DMA_CCR_EGREQ 0x00100000
+#define TX4938_DMA_CCR_CHDN 0x00080000
+#define TX4938_DMA_CCR_DNCTL 0x00060000
+#define TX4938_DMA_CCR_EXTRQ 0x00010000
+#define TX4938_DMA_CCR_INTRQD 0x0000e000
+#define TX4938_DMA_CCR_INTENE 0x00001000
+#define TX4938_DMA_CCR_INTENC 0x00000800
+#define TX4938_DMA_CCR_INTENT 0x00000400
+#define TX4938_DMA_CCR_CHNEN 0x00000200
+#define TX4938_DMA_CCR_XFACT 0x00000100
+#define TX4938_DMA_CCR_SMPCHN 0x00000020
+#define TX4938_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c)
+#define TX4938_DMA_CCR_XFSZ_1W TX4938_DMA_CCR_XFSZ(2)
+#define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3)
+#define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4)
+#define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5)
+#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6)
+#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7)
+#define TX4938_DMA_CCR_MEMIO 0x00000002
+#define TX4938_DMA_CCR_SNGAD 0x00000001
+
+/* bits for CSRn */
+#define TX4938_DMA_CSR_CHNEN 0x00000400
+#define TX4938_DMA_CSR_STLXFER 0x00000200
+#define TX4938_DMA_CSR_CHNACT 0x00000100
+#define TX4938_DMA_CSR_ABCHC 0x00000080
+#define TX4938_DMA_CSR_NCHNC 0x00000040
+#define TX4938_DMA_CSR_NTRNFC 0x00000020
+#define TX4938_DMA_CSR_EXTDN 0x00000010
+#define TX4938_DMA_CSR_CFERR 0x00000008
+#define TX4938_DMA_CSR_CHERR 0x00000004
+#define TX4938_DMA_CSR_DESERR 0x00000002
+#define TX4938_DMA_CSR_SORERR 0x00000001
+
+/* TX4938 Interrupt Controller (32-bit registers) */
+#define TX4938_IRC_BASE 0xf510
+#define TX4938_IRC_IRFLAG0 0xf510
+#define TX4938_IRC_IRFLAG1 0xf514
+#define TX4938_IRC_IRPOL 0xf518
+#define TX4938_IRC_IRRCNT 0xf51c
+#define TX4938_IRC_IRMASKINT 0xf520
+#define TX4938_IRC_IRMASKEXT 0xf524
+#define TX4938_IRC_IRDEN 0xf600
+#define TX4938_IRC_IRDM0 0xf604
+#define TX4938_IRC_IRDM1 0xf608
+#define TX4938_IRC_IRLVL0 0xf610
+#define TX4938_IRC_IRLVL1 0xf614
+#define TX4938_IRC_IRLVL2 0xf618
+#define TX4938_IRC_IRLVL3 0xf61c
+#define TX4938_IRC_IRLVL4 0xf620
+#define TX4938_IRC_IRLVL5 0xf624
+#define TX4938_IRC_IRLVL6 0xf628
+#define TX4938_IRC_IRLVL7 0xf62c
+#define TX4938_IRC_IRMSK 0xf640
+#define TX4938_IRC_IREDC 0xf660
+#define TX4938_IRC_IRPND 0xf680
+#define TX4938_IRC_IRCS 0xf6a0
+#define TX4938_IRC_LIMIT 0xf6ff
+
+
+#ifndef __ASSEMBLY__
+
+#define tx4938_sdramcptr ((struct tx4938_sdramc_reg *)TX4938_SDRAMC_REG)
+#define tx4938_ebuscptr ((struct tx4938_ebusc_reg *)TX4938_EBUSC_REG)
+#define tx4938_dmaptr(ch) ((struct tx4938_dma_reg *)TX4938_DMA_REG(ch))
+#define tx4938_ndfmcptr ((struct tx4938_ndfmc_reg *)TX4938_NDFMC_REG)
+#define tx4938_ircptr ((struct tx4938_irc_reg *)TX4938_IRC_REG)
+#define tx4938_pcicptr ((struct tx4938_pcic_reg *)TX4938_PCIC_REG)
+#define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG)
+#define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG)
+#define tx4938_tmrptr(ch) ((struct tx4938_tmr_reg *)TX4938_TMR_REG(ch))
+#define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch))
+#define tx4938_pioptr ((struct tx4938_pio_reg *)TX4938_PIO_REG)
+#define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG)
+#define tx4938_spiptr ((struct tx4938_spi_reg *)TX4938_SPI_REG)
+#define tx4938_sramcptr ((struct tx4938_sramc_reg *)TX4938_SRAMC_REG)
+
+
+#define TX4938_REV_MAJ_MIN() ((unsigned long)tx4938_ccfgptr->crir & 0x00ff)
+#define TX4938_REV_PCODE() ((unsigned long)tx4938_ccfgptr->crir >> 16)
+
+#define TX4938_SDRAMC_BA(ch) ((tx4938_sdramcptr->cr[ch] >> 49) << 21)
+#define TX4938_SDRAMC_SIZE(ch) (((tx4938_sdramcptr->cr[ch] >> 33) + 1) << 21)
+
+#define TX4938_EBUSC_BA(ch) ((tx4938_ebuscptr->cr[ch] >> 48) << 20)
+#define TX4938_EBUSC_SIZE(ch) \
+ (0x00100000 << ((unsigned long)(tx4938_ebuscptr->cr[ch] >> 8) & 0xf))
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-mips/tx4938/tx4938_mips.h b/include/asm-mips/tx4938/tx4938_mips.h
new file mode 100644
index 0000000..cf89b20
--- /dev/null
+++ b/include/asm-mips/tx4938/tx4938_mips.h
@@ -0,0 +1,54 @@
+/*
+ * linux/include/asm-mips/tx4938/tx4938_bitmask.h
+ * Generic bitmask definitions
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#ifndef TX4938_TX4938_MIPS_H
+#define TX4938_TX4938_MIPS_H
+#ifndef __ASSEMBLY__
+
+#define reg_rd08(r) ((u8 )(*((vu8 *)(r))))
+#define reg_rd16(r) ((u16)(*((vu16*)(r))))
+#define reg_rd32(r) ((u32)(*((vu32*)(r))))
+#define reg_rd64(r) ((u64)(*((vu64*)(r))))
+
+#define reg_wr08(r,v) ((*((vu8 *)(r)))=((u8 )(v)))
+#define reg_wr16(r,v) ((*((vu16*)(r)))=((u16)(v)))
+#define reg_wr32(r,v) ((*((vu32*)(r)))=((u32)(v)))
+#define reg_wr64(r,v) ((*((vu64*)(r)))=((u64)(v)))
+
+typedef volatile __signed char vs8;
+typedef volatile unsigned char vu8;
+
+typedef volatile __signed short vs16;
+typedef volatile unsigned short vu16;
+
+typedef volatile __signed int vs32;
+typedef volatile unsigned int vu32;
+
+typedef s8 s08;
+typedef vs8 vs08;
+
+typedef u8 u08;
+typedef vu8 vu08;
+
+#if (_MIPS_SZLONG == 64)
+
+typedef volatile __signed__ long vs64;
+typedef volatile unsigned long vu64;
+
+#else
+
+typedef volatile __signed__ long long vs64;
+typedef volatile unsigned long long vu64;
+
+#endif
+#endif
+#endif
diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h
index 5c2c983..41bb96b 100644
--- a/include/asm-mips/uaccess.h
+++ b/include/asm-mips/uaccess.h
@@ -196,63 +196,55 @@
__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
+#define __m(x) (*(struct __large_struct __user *)(x))
/*
* Yuck. We need two variants, one for 64bit operation and one
* for 32 bit mode and old iron.
*/
#ifdef __mips64
-#define __GET_USER_DW(__gu_err) __get_user_asm("ld", __gu_err)
+#define __GET_USER_DW(ptr) __get_user_asm("ld", ptr)
#else
-#define __GET_USER_DW(__gu_err) __get_user_asm_ll32(__gu_err)
+#define __GET_USER_DW(ptr) __get_user_asm_ll32(ptr)
#endif
#define __get_user_nocheck(x,ptr,size) \
({ \
- __typeof(*(ptr)) __gu_val = 0; \
- long __gu_addr; \
+ __typeof(*(ptr)) __gu_val = (__typeof(*(ptr))) 0; \
long __gu_err = 0; \
\
- might_sleep(); \
- __gu_addr = (long) (ptr); \
switch (size) { \
- case 1: __get_user_asm("lb", __gu_err); break; \
- case 2: __get_user_asm("lh", __gu_err); break; \
- case 4: __get_user_asm("lw", __gu_err); break; \
- case 8: __GET_USER_DW(__gu_err); break; \
+ case 1: __get_user_asm("lb", ptr); break; \
+ case 2: __get_user_asm("lh", ptr); break; \
+ case 4: __get_user_asm("lw", ptr); break; \
+ case 8: __GET_USER_DW(ptr); break; \
default: __get_user_unknown(); break; \
} \
- x = (__typeof__(*(ptr))) __gu_val; \
+ (x) = (__typeof__(*(ptr))) __gu_val; \
__gu_err; \
})
#define __get_user_check(x,ptr,size) \
({ \
+ const __typeof__(*(ptr)) __user * __gu_addr = (ptr); \
__typeof__(*(ptr)) __gu_val = 0; \
- long __gu_addr; \
- long __gu_err; \
+ long __gu_err = -EFAULT; \
\
- might_sleep(); \
- __gu_addr = (long) (ptr); \
- __gu_err = access_ok(VERIFY_READ, (void *) __gu_addr, size) \
- ? 0 : -EFAULT; \
- \
- if (likely(!__gu_err)) { \
+ if (likely(access_ok(VERIFY_READ, __gu_addr, size))) { \
switch (size) { \
- case 1: __get_user_asm("lb", __gu_err); break; \
- case 2: __get_user_asm("lh", __gu_err); break; \
- case 4: __get_user_asm("lw", __gu_err); break; \
- case 8: __GET_USER_DW(__gu_err); break; \
+ case 1: __get_user_asm("lb", __gu_addr); break; \
+ case 2: __get_user_asm("lh", __gu_addr); break; \
+ case 4: __get_user_asm("lw", __gu_addr); break; \
+ case 8: __GET_USER_DW(__gu_addr); break; \
default: __get_user_unknown(); break; \
} \
} \
- x = (__typeof__(*(ptr))) __gu_val; \
+ (x) = (__typeof__(*(ptr))) __gu_val; \
__gu_err; \
})
-#define __get_user_asm(insn,__gu_err) \
-({ \
+#define __get_user_asm(insn, addr) \
+{ \
__asm__ __volatile__( \
"1: " insn " %1, %3 \n" \
"2: \n" \
@@ -264,20 +256,20 @@
" "__UA_ADDR "\t1b, 3b \n" \
" .previous \n" \
: "=r" (__gu_err), "=r" (__gu_val) \
- : "0" (__gu_err), "o" (__m(__gu_addr)), "i" (-EFAULT)); \
-})
+ : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \
+}
/*
* Get a long long 64 using 32 bit registers.
*/
-#define __get_user_asm_ll32(__gu_err) \
-({ \
+#define __get_user_asm_ll32(addr) \
+{ \
__asm__ __volatile__( \
- "1: lw %1, %3 \n" \
- "2: lw %D1, %4 \n" \
+ "1: lw %1, (%3) \n" \
+ "2: lw %D1, 4(%3) \n" \
" move %0, $0 \n" \
"3: .section .fixup,\"ax\" \n" \
- "4: li %0, %5 \n" \
+ "4: li %0, %4 \n" \
" move %1, $0 \n" \
" move %D1, $0 \n" \
" j 3b \n" \
@@ -287,9 +279,8 @@
" " __UA_ADDR " 2b, 4b \n" \
" .previous \n" \
: "=r" (__gu_err), "=&r" (__gu_val) \
- : "0" (__gu_err), "o" (__m(__gu_addr)), \
- "o" (__m(__gu_addr + 4)), "i" (-EFAULT)); \
-})
+ : "0" (0), "r" (addr), "i" (-EFAULT)); \
+}
extern void __get_user_unknown(void);
@@ -298,25 +289,22 @@
* for 32 bit mode and old iron.
*/
#ifdef __mips64
-#define __PUT_USER_DW(__pu_val) __put_user_asm("sd", __pu_val)
+#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr)
#else
-#define __PUT_USER_DW(__pu_val) __put_user_asm_ll32(__pu_val)
+#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr)
#endif
#define __put_user_nocheck(x,ptr,size) \
({ \
__typeof__(*(ptr)) __pu_val; \
- long __pu_addr; \
long __pu_err = 0; \
\
- might_sleep(); \
__pu_val = (x); \
- __pu_addr = (long) (ptr); \
switch (size) { \
- case 1: __put_user_asm("sb", __pu_val); break; \
- case 2: __put_user_asm("sh", __pu_val); break; \
- case 4: __put_user_asm("sw", __pu_val); break; \
- case 8: __PUT_USER_DW(__pu_val); break; \
+ case 1: __put_user_asm("sb", ptr); break; \
+ case 2: __put_user_asm("sh", ptr); break; \
+ case 4: __put_user_asm("sw", ptr); break; \
+ case 8: __PUT_USER_DW(ptr); break; \
default: __put_user_unknown(); break; \
} \
__pu_err; \
@@ -324,30 +312,24 @@
#define __put_user_check(x,ptr,size) \
({ \
- __typeof__(*(ptr)) __pu_val; \
- long __pu_addr; \
- long __pu_err; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ long __pu_err = -EFAULT; \
\
- might_sleep(); \
- __pu_val = (x); \
- __pu_addr = (long) (ptr); \
- __pu_err = access_ok(VERIFY_WRITE, (void *) __pu_addr, size) \
- ? 0 : -EFAULT; \
- \
- if (likely(!__pu_err)) { \
+ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \
switch (size) { \
- case 1: __put_user_asm("sb", __pu_val); break; \
- case 2: __put_user_asm("sh", __pu_val); break; \
- case 4: __put_user_asm("sw", __pu_val); break; \
- case 8: __PUT_USER_DW(__pu_val); break; \
+ case 1: __put_user_asm("sb", __pu_addr); break; \
+ case 2: __put_user_asm("sh", __pu_addr); break; \
+ case 4: __put_user_asm("sw", __pu_addr); break; \
+ case 8: __PUT_USER_DW(__pu_addr); break; \
default: __put_user_unknown(); break; \
} \
} \
__pu_err; \
})
-#define __put_user_asm(insn, __pu_val) \
-({ \
+#define __put_user_asm(insn, ptr) \
+{ \
__asm__ __volatile__( \
"1: " insn " %z2, %3 # __put_user_asm\n" \
"2: \n" \
@@ -359,18 +341,18 @@
" " __UA_ADDR " 1b, 3b \n" \
" .previous \n" \
: "=r" (__pu_err) \
- : "0" (__pu_err), "Jr" (__pu_val), "o" (__m(__pu_addr)), \
+ : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \
"i" (-EFAULT)); \
-})
+}
-#define __put_user_asm_ll32(__pu_val) \
-({ \
+#define __put_user_asm_ll32(ptr) \
+{ \
__asm__ __volatile__( \
- "1: sw %2, %3 # __put_user_asm_ll32 \n" \
- "2: sw %D2, %4 \n" \
+ "1: sw %2, (%3) # __put_user_asm_ll32 \n" \
+ "2: sw %D2, 4(%3) \n" \
"3: \n" \
" .section .fixup,\"ax\" \n" \
- "4: li %0, %5 \n" \
+ "4: li %0, %4 \n" \
" j 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
@@ -378,9 +360,9 @@
" " __UA_ADDR " 2b, 4b \n" \
" .previous" \
: "=r" (__pu_err) \
- : "0" (__pu_err), "r" (__pu_val), "o" (__m(__pu_addr)), \
- "o" (__m(__pu_addr + 4)), "i" (-EFAULT)); \
-})
+ : "0" (0), "r" (__pu_val), "r" (ptr), \
+ "i" (-EFAULT)); \
+}
extern void __put_user_unknown(void);
@@ -403,7 +385,7 @@
#define __invoke_copy_to_user(to,from,n) \
({ \
- register void *__cu_to_r __asm__ ("$4"); \
+ register void __user *__cu_to_r __asm__ ("$4"); \
register const void *__cu_from_r __asm__ ("$5"); \
register long __cu_len_r __asm__ ("$6"); \
\
@@ -435,7 +417,7 @@
*/
#define __copy_to_user(to,from,n) \
({ \
- void *__cu_to; \
+ void __user *__cu_to; \
const void *__cu_from; \
long __cu_len; \
\
@@ -465,7 +447,7 @@
*/
#define copy_to_user(to,from,n) \
({ \
- void *__cu_to; \
+ void __user *__cu_to; \
const void *__cu_from; \
long __cu_len; \
\
@@ -482,7 +464,7 @@
#define __invoke_copy_from_user(to,from,n) \
({ \
register void *__cu_to_r __asm__ ("$4"); \
- register const void *__cu_from_r __asm__ ("$5"); \
+ register const void __user *__cu_from_r __asm__ ("$5"); \
register long __cu_len_r __asm__ ("$6"); \
\
__cu_to_r = (to); \
@@ -521,7 +503,7 @@
#define __copy_from_user(to,from,n) \
({ \
void *__cu_to; \
- const void *__cu_from; \
+ const void __user *__cu_from; \
long __cu_len; \
\
might_sleep(); \
@@ -552,7 +534,7 @@
#define copy_from_user(to,from,n) \
({ \
void *__cu_to; \
- const void *__cu_from; \
+ const void __user *__cu_from; \
long __cu_len; \
\
might_sleep(); \
@@ -569,8 +551,8 @@
#define copy_in_user(to,from,n) \
({ \
- void *__cu_to; \
- const void *__cu_from; \
+ void __user *__cu_to; \
+ const void __user *__cu_from; \
long __cu_len; \
\
might_sleep(); \
@@ -596,7 +578,7 @@
* On success, this will be zero.
*/
static inline __kernel_size_t
-__clear_user(void *addr, __kernel_size_t size)
+__clear_user(void __user *addr, __kernel_size_t size)
{
__kernel_size_t res;
@@ -616,7 +598,7 @@
#define clear_user(addr,n) \
({ \
- void * __cl_addr = (addr); \
+ void __user * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && access_ok(VERIFY_WRITE, \
((unsigned long)(__cl_addr)), __cl_size)) \
@@ -645,7 +627,7 @@
* and returns @count.
*/
static inline long
-__strncpy_from_user(char *__to, const char *__from, long __len)
+__strncpy_from_user(char *__to, const char __user *__from, long __len)
{
long res;
@@ -682,7 +664,7 @@
* and returns @count.
*/
static inline long
-strncpy_from_user(char *__to, const char *__from, long __len)
+strncpy_from_user(char *__to, const char __user *__from, long __len)
{
long res;
@@ -701,7 +683,7 @@
}
/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-static inline long __strlen_user(const char *s)
+static inline long __strlen_user(const char __user *s)
{
long res;
@@ -731,7 +713,7 @@
* If there is a limit on the length of a valid string, you may wish to
* consider using strnlen_user() instead.
*/
-static inline long strlen_user(const char *s)
+static inline long strlen_user(const char __user *s)
{
long res;
@@ -748,7 +730,7 @@
}
/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-static inline long __strnlen_user(const char *s, long n)
+static inline long __strnlen_user(const char __user *s, long n)
{
long res;
@@ -779,7 +761,7 @@
* If there is a limit on the length of a valid string, you may wish to
* consider using strnlen_user() instead.
*/
-static inline long strnlen_user(const char *s, long n)
+static inline long strnlen_user(const char __user *s, long n)
{
long res;
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index ad4d480..89ea8b6 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -303,16 +303,21 @@
#define __NR_add_key (__NR_Linux + 280)
#define __NR_request_key (__NR_Linux + 281)
#define __NR_keyctl (__NR_Linux + 282)
+#define __NR_set_thread_area (__NR_Linux + 283)
+#define __NR_inotify_init (__NR_Linux + 284)
+#define __NR_inotify_add_watch (__NR_Linux + 285)
+#define __NR_inotify_rm_watch (__NR_Linux + 286)
+
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 282
+#define __NR_Linux_syscalls 286
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 282
+#define __NR_O32_Linux_syscalls 283
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -562,16 +567,20 @@
#define __NR_add_key (__NR_Linux + 239)
#define __NR_request_key (__NR_Linux + 240)
#define __NR_keyctl (__NR_Linux + 241)
+#define __NR_set_thread_area (__NR_Linux + 242)
+#define __NR_inotify_init (__NR_Linux + 243)
+#define __NR_inotify_add_watch (__NR_Linux + 244)
+#define __NR_inotify_rm_watch (__NR_Linux + 245)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 241
+#define __NR_Linux_syscalls 245
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 241
+#define __NR_64_Linux_syscalls 242
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -825,16 +834,20 @@
#define __NR_add_key (__NR_Linux + 243)
#define __NR_request_key (__NR_Linux + 244)
#define __NR_keyctl (__NR_Linux + 245)
+#define __NR_set_thread_area (__NR_Linux + 246)
+#define __NR_inotify_init (__NR_Linux + 247)
+#define __NR_inotify_add_watch (__NR_Linux + 248)
+#define __NR_inotify_rm_watch (__NR_Linux + 249)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 245
+#define __NR_Linux_syscalls 249
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 245
+#define __NR_N32_Linux_syscalls 246
#ifndef __ASSEMBLY__
@@ -1164,7 +1177,6 @@
unsigned long fd, unsigned long pgoff);
asmlinkage int sys_execve(nabi_no_regargs struct pt_regs regs);
asmlinkage int sys_pipe(nabi_no_regargs struct pt_regs regs);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-mips/vga.h b/include/asm-mips/vga.h
index 6b35cf0..ca5cec9 100644
--- a/include/asm-mips/vga.h
+++ b/include/asm-mips/vga.h
@@ -6,6 +6,8 @@
#ifndef _ASM_VGA_H
#define _ASM_VGA_H
+#include <asm/byteorder.h>
+
/*
* On the PC, we can just recalculate addresses and then
* access the videoram directly without any black magic.
@@ -16,4 +18,27 @@
#define vga_readb(x) (*(x))
#define vga_writeb(x,y) (*(y) = (x))
+#define VT_BUF_HAVE_RW
+/*
+ * These are only needed for supporting VGA or MDA text mode, which use little
+ * endian byte ordering.
+ * In other cases, we can optimize by using native byte ordering and
+ * <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+ *addr = cpu_to_le16(val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+ return le16_to_cpu(*addr);
+}
+
+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
+#define scr_memmovew(d, s, c) memmove(d, s, c)
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
+
#endif /* _ASM_VGA_H */
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
index 04ee53b..ad374bd 100644
--- a/include/asm-mips/war.h
+++ b/include/asm-mips/war.h
@@ -177,6 +177,17 @@
#endif
/*
+ * The RM9000 has a bug (though PMC-Sierra opposes it being called that)
+ * where invalid instructions in the same I-cache line worth of instructions
+ * being fetched may case spurious exceptions.
+ */
+#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_MOMENCO_OCELOT_3) || \
+ defined(CONFIG_PMC_YOSEMITE)
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#endif
+
+
+/*
* ON the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
* may cause ll / sc and lld / scd sequences to execute non-atomically.
*/
@@ -187,6 +198,9 @@
/*
* Workarounds default to off
*/
+#ifndef ICACHE_REFILLS_WORKAROUND_WAR
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#endif
#ifndef R4600_V1_INDEX_ICACHEOP_WAR
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#endif
diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h
index 30b0234..3ce3440 100644
--- a/include/asm-parisc/assembly.h
+++ b/include/asm-parisc/assembly.h
@@ -21,7 +21,9 @@
#ifndef _PARISC_ASSEMBLY_H
#define _PARISC_ASSEMBLY_H
-#ifdef __LP64__
+#define CALLEE_FLOAT_FRAME_SIZE 80
+
+#ifdef CONFIG_64BIT
#define LDREG ldd
#define STREG std
#define LDREGX ldd,s
@@ -30,8 +32,8 @@
#define SHRREG shrd
#define RP_OFFSET 16
#define FRAME_SIZE 128
-#define CALLEE_SAVE_FRAME_SIZE 144
-#else
+#define CALLEE_REG_FRAME_SIZE 144
+#else /* CONFIG_64BIT */
#define LDREG ldw
#define STREG stw
#define LDREGX ldwx,s
@@ -40,9 +42,11 @@
#define SHRREG shr
#define RP_OFFSET 20
#define FRAME_SIZE 64
-#define CALLEE_SAVE_FRAME_SIZE 128
+#define CALLEE_REG_FRAME_SIZE 128
#endif
+#define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE)
+
#ifdef CONFIG_PA20
#define BL b,l
# ifdef CONFIG_64BIT
@@ -300,9 +304,35 @@
fldd,mb -8(\regs), %fr0
.endm
+ .macro callee_save_float
+ fstd,ma %fr12, 8(%r30)
+ fstd,ma %fr13, 8(%r30)
+ fstd,ma %fr14, 8(%r30)
+ fstd,ma %fr15, 8(%r30)
+ fstd,ma %fr16, 8(%r30)
+ fstd,ma %fr17, 8(%r30)
+ fstd,ma %fr18, 8(%r30)
+ fstd,ma %fr19, 8(%r30)
+ fstd,ma %fr20, 8(%r30)
+ fstd,ma %fr21, 8(%r30)
+ .endm
+
+ .macro callee_rest_float
+ fldd,mb -8(%r30), %fr21
+ fldd,mb -8(%r30), %fr20
+ fldd,mb -8(%r30), %fr19
+ fldd,mb -8(%r30), %fr18
+ fldd,mb -8(%r30), %fr17
+ fldd,mb -8(%r30), %fr16
+ fldd,mb -8(%r30), %fr15
+ fldd,mb -8(%r30), %fr14
+ fldd,mb -8(%r30), %fr13
+ fldd,mb -8(%r30), %fr12
+ .endm
+
#ifdef __LP64__
.macro callee_save
- std,ma %r3, CALLEE_SAVE_FRAME_SIZE(%r30)
+ std,ma %r3, CALLEE_REG_FRAME_SIZE(%r30)
mfctl %cr27, %r3
std %r4, -136(%r30)
std %r5, -128(%r30)
@@ -340,13 +370,13 @@
ldd -128(%r30), %r5
ldd -136(%r30), %r4
mtctl %r3, %cr27
- ldd,mb -CALLEE_SAVE_FRAME_SIZE(%r30), %r3
+ ldd,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3
.endm
#else /* ! __LP64__ */
.macro callee_save
- stw,ma %r3, CALLEE_SAVE_FRAME_SIZE(%r30)
+ stw,ma %r3, CALLEE_REG_FRAME_SIZE(%r30)
mfctl %cr27, %r3
stw %r4, -124(%r30)
stw %r5, -120(%r30)
@@ -384,7 +414,7 @@
ldw -120(%r30), %r5
ldw -124(%r30), %r4
mtctl %r3, %cr27
- ldw,mb -CALLEE_SAVE_FRAME_SIZE(%r30), %r3
+ ldw,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3
.endm
#endif /* ! __LP64__ */
@@ -450,5 +480,30 @@
REST_CR (%cr22, PT_PSW (\regs))
.endm
+
+ /* First step to create a "relied upon translation"
+ * See PA 2.0 Arch. page F-4 and F-5.
+ *
+ * The ssm was originally necessary due to a "PCxT bug".
+ * But someone decided it needed to be added to the architecture
+ * and this "feature" went into rev3 of PA-RISC 1.1 Arch Manual.
+ * It's been carried forward into PA 2.0 Arch as well. :^(
+ *
+ * "ssm 0,%r0" is a NOP with side effects (prefetch barrier).
+ * rsm/ssm prevents the ifetch unit from speculatively fetching
+ * instructions past this line in the code stream.
+ * PA 2.0 processor will single step all insn in the same QUAD (4 insn).
+ */
+ .macro pcxt_ssm_bug
+ rsm PSW_SM_I,%r0
+ nop /* 1 */
+ nop /* 2 */
+ nop /* 3 */
+ nop /* 4 */
+ nop /* 5 */
+ nop /* 6 */
+ nop /* 7 */
+ .endm
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/include/asm-parisc/bitops.h b/include/asm-parisc/bitops.h
index af7db69..55b98c6 100644
--- a/include/asm-parisc/bitops.h
+++ b/include/asm-parisc/bitops.h
@@ -2,7 +2,7 @@
#define _PARISC_BITOPS_H
#include <linux/compiler.h>
-#include <asm/spinlock.h>
+#include <asm/types.h> /* for BITS_PER_LONG/SHIFT_PER_LONG */
#include <asm/byteorder.h>
#include <asm/atomic.h>
@@ -12,193 +12,157 @@
* to include/asm-i386/bitops.h or kerneldoc
*/
-#ifdef __LP64__
-# define SHIFT_PER_LONG 6
-#ifndef BITS_PER_LONG
-# define BITS_PER_LONG 64
-#endif
-#else
-# define SHIFT_PER_LONG 5
-#ifndef BITS_PER_LONG
-# define BITS_PER_LONG 32
-#endif
-#endif
-
-#define CHOP_SHIFTCOUNT(x) ((x) & (BITS_PER_LONG - 1))
+#define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1))
#define smp_mb__before_clear_bit() smp_mb()
#define smp_mb__after_clear_bit() smp_mb()
-static __inline__ void set_bit(int nr, volatile unsigned long * address)
+/* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion
+ * on use of volatile and __*_bit() (set/clear/change):
+ * *_bit() want use of volatile.
+ * __*_bit() are "relaxed" and don't use spinlock or volatile.
+ */
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
*addr |= mask;
_atomic_spin_unlock_irqrestore(addr, flags);
}
-static __inline__ void __set_bit(int nr, volatile unsigned long * address)
+static __inline__ void __set_bit(unsigned long nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- *addr |= mask;
+ *m |= 1UL << CHOP_SHIFTCOUNT(nr);
}
-static __inline__ void clear_bit(int nr, volatile unsigned long * address)
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long mask = ~(1UL << CHOP_SHIFTCOUNT(nr));
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
- *addr &= ~mask;
+ *addr &= mask;
_atomic_spin_unlock_irqrestore(addr, flags);
}
-static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * address)
+static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- *addr &= ~mask;
+ *m &= ~(1UL << CHOP_SHIFTCOUNT(nr));
}
-static __inline__ void change_bit(int nr, volatile unsigned long * address)
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
*addr ^= mask;
_atomic_spin_unlock_irqrestore(addr, flags);
}
-static __inline__ void __change_bit(int nr, volatile unsigned long * address)
+static __inline__ void __change_bit(unsigned long nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- *addr ^= mask;
+ *m ^= 1UL << CHOP_SHIFTCOUNT(nr);
}
-static __inline__ int test_and_set_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long oldbit;
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr |= mask;
+ oldbit = *addr;
+ *addr = oldbit | mask;
_atomic_spin_unlock_irqrestore(addr, flags);
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
static __inline__ int __test_and_set_bit(int nr, volatile unsigned long * address)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long oldbit;
+ unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr |= mask;
+ oldbit = *addr;
+ *addr = oldbit | mask;
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
-static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long oldbit;
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr &= ~mask;
+ oldbit = *addr;
+ *addr = oldbit & ~mask;
_atomic_spin_unlock_irqrestore(addr, flags);
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long * address)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
+ unsigned long oldbit;
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr &= ~mask;
+ oldbit = *addr;
+ *addr = oldbit & ~mask;
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
-static __inline__ int test_and_change_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long oldbit;
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr ^= mask;
+ oldbit = *addr;
+ *addr = oldbit ^ mask;
_atomic_spin_unlock_irqrestore(addr, flags);
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
static __inline__ int __test_and_change_bit(int nr, volatile unsigned long * address)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
+ unsigned long oldbit;
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr ^= mask;
+ oldbit = *addr;
+ *addr = oldbit ^ mask;
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
static __inline__ int test_bit(int nr, const volatile unsigned long *address)
{
- unsigned long mask;
- const unsigned long *addr = (const unsigned long *)address;
-
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ const unsigned long *addr = (const unsigned long *)address + (nr >> SHIFT_PER_LONG);
return !!(*addr & mask);
}
@@ -229,7 +193,7 @@
unsigned long ret;
__asm__(
-#if BITS_PER_LONG > 32
+#ifdef __LP64__
" ldi 63,%1\n"
" extrd,u,*<> %0,63,32,%%r0\n"
" extrd,u,*TR %0,31,32,%0\n" /* move top 32-bits down */
@@ -304,14 +268,7 @@
* hweightN: returns the hamming weight (i.e. the number
* of bits set) of a N-bit word
*/
-#define hweight64(x) \
-({ \
- unsigned long __x = (x); \
- unsigned int __w; \
- __w = generic_hweight32((unsigned int) __x); \
- __w += generic_hweight32((unsigned int) (__x>>32)); \
- __w; \
-})
+#define hweight64(x) generic_hweight64(x)
#define hweight32(x) generic_hweight32(x)
#define hweight16(x) generic_hweight16(x)
#define hweight8(x) generic_hweight8(x)
@@ -324,7 +281,13 @@
*/
static inline int sched_find_first_bit(const unsigned long *b)
{
-#ifndef __LP64__
+#ifdef __LP64__
+ if (unlikely(b[0]))
+ return __ffs(b[0]);
+ if (unlikely(b[1]))
+ return __ffs(b[1]) + 64;
+ return __ffs(b[2]) + 128;
+#else
if (unlikely(b[0]))
return __ffs(b[0]);
if (unlikely(b[1]))
@@ -334,14 +297,6 @@
if (b[3])
return __ffs(b[3]) + 96;
return __ffs(b[4]) + 128;
-#else
- if (unlikely(b[0]))
- return __ffs(b[0]);
- if (unlikely(((unsigned int)b[1])))
- return __ffs(b[1]) + 64;
- if (b[1] >> 32)
- return __ffs(b[1] >> 32) + 96;
- return __ffs(b[2]) + 128;
#endif
}
@@ -391,7 +346,7 @@
static __inline__ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset)
{
- const unsigned long *p = addr + (offset >> 6);
+ const unsigned long *p = addr + (offset >> SHIFT_PER_LONG);
unsigned long result = offset & ~(BITS_PER_LONG-1);
unsigned long tmp;
@@ -445,71 +400,90 @@
* test_and_{set,clear}_bit guarantee atomicity without
* disabling interrupts.
*/
-#ifdef __LP64__
-#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_set_bit_atomic(l,nr,addr) test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr)
-#else
-#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_set_bit_atomic(l,nr,addr) test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr)
-#endif
+
+/* '3' is bits per byte */
+#define LE_BYTE_ADDR ((sizeof(unsigned long) - 1) << 3)
+
+#define ext2_test_bit(nr, addr) \
+ test_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_set_bit(nr, addr) \
+ __test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr) \
+ __test_and_clear_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+
+#define ext2_set_bit_atomic(l,nr,addr) \
+ test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_clear_bit_atomic(l,nr,addr) \
+ test_and_clear_bit( (nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
#endif /* __KERNEL__ */
-static __inline__ int ext2_test_bit(int nr, __const__ void * addr)
-{
- __const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
-
- return (ADDR[nr >> 3] >> (nr & 7)) & 1;
-}
-
-/*
- * This implementation of ext2_find_{first,next}_zero_bit was stolen from
- * Linus' asm-alpha/bitops.h and modified for a big-endian machine.
- */
#define ext2_find_first_zero_bit(addr, size) \
- ext2_find_next_zero_bit((addr), (size), 0)
+ ext2_find_next_zero_bit((addr), (size), 0)
-extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
- unsigned long size, unsigned long offset)
+/* include/linux/byteorder does not support "unsigned long" type */
+static inline unsigned long ext2_swabp(unsigned long * x)
{
- unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
- unsigned int result = offset & ~31UL;
- unsigned int tmp;
+#ifdef __LP64__
+ return (unsigned long) __swab64p((u64 *) x);
+#else
+ return (unsigned long) __swab32p((u32 *) x);
+#endif
+}
+
+/* include/linux/byteorder doesn't support "unsigned long" type */
+static inline unsigned long ext2_swab(unsigned long y)
+{
+#ifdef __LP64__
+ return (unsigned long) __swab64((u64) y);
+#else
+ return (unsigned long) __swab32((u32) y);
+#endif
+}
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+ unsigned long *p = (unsigned long *) addr + (offset >> SHIFT_PER_LONG);
+ unsigned long result = offset & ~(BITS_PER_LONG - 1);
+ unsigned long tmp;
if (offset >= size)
return size;
size -= result;
- offset &= 31UL;
+ offset &= (BITS_PER_LONG - 1UL);
if (offset) {
- tmp = cpu_to_le32p(p++);
- tmp |= ~0UL >> (32-offset);
- if (size < 32)
+ tmp = ext2_swabp(p++);
+ tmp |= (~0UL >> (BITS_PER_LONG - offset));
+ if (size < BITS_PER_LONG)
goto found_first;
- if (tmp != ~0U)
+ if (~tmp)
goto found_middle;
- size -= 32;
- result += 32;
+ size -= BITS_PER_LONG;
+ result += BITS_PER_LONG;
}
- while (size >= 32) {
- if ((tmp = cpu_to_le32p(p++)) != ~0U)
- goto found_middle;
- result += 32;
- size -= 32;
+
+ while (size & ~(BITS_PER_LONG - 1)) {
+ if (~(tmp = *(p++)))
+ goto found_middle_swap;
+ result += BITS_PER_LONG;
+ size -= BITS_PER_LONG;
}
if (!size)
return result;
- tmp = cpu_to_le32p(p);
+ tmp = ext2_swabp(p);
found_first:
- tmp |= ~0U << size;
+ tmp |= ~0UL << size;
+ if (tmp == ~0UL) /* Are any bits zero? */
+ return result + size; /* Nope. Skip ffz */
found_middle:
return result + ffz(tmp);
+
+found_middle_swap:
+ return result + ffz(ext2_swab(tmp));
}
+
/* Bitmap functions for the minix filesystem. */
#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr)
#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr))
diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h
index aa592d8..1bc3c83 100644
--- a/include/asm-parisc/cacheflush.h
+++ b/include/asm-parisc/cacheflush.h
@@ -100,30 +100,34 @@
/* Simple function to work out if we have an existing address translation
* for a user space vma. */
-static inline pte_t *__translation_exists(struct mm_struct *mm,
- unsigned long addr)
+static inline int translation_exists(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long pfn)
{
- pgd_t *pgd = pgd_offset(mm, addr);
+ pgd_t *pgd = pgd_offset(vma->vm_mm, addr);
pmd_t *pmd;
- pte_t *pte;
+ pte_t pte;
if(pgd_none(*pgd))
- return NULL;
+ return 0;
pmd = pmd_offset(pgd, addr);
if(pmd_none(*pmd) || pmd_bad(*pmd))
- return NULL;
+ return 0;
- pte = pte_offset_map(pmd, addr);
+ /* We cannot take the pte lock here: flush_cache_page is usually
+ * called with pte lock already held. Whereas flush_dcache_page
+ * takes flush_dcache_mmap_lock, which is lower in the hierarchy:
+ * the vma itself is secure, but the pte might come or go racily.
+ */
+ pte = *pte_offset_map(pmd, addr);
+ /* But pte_unmap() does nothing on this architecture */
- /* The PA flush mappings show up as pte_none, but they're
- * valid none the less */
- if(pte_none(*pte) && ((pte_val(*pte) & _PAGE_FLUSH) == 0))
- return NULL;
- return pte;
+ /* Filter out coincidental file entries and swap entries */
+ if (!(pte_val(pte) & (_PAGE_FLUSH|_PAGE_PRESENT)))
+ return 0;
+
+ return pte_pfn(pte) == pfn;
}
-#define translation_exists(vma, addr) __translation_exists((vma)->vm_mm, addr)
-
/* Private function to flush a page from the cache of a non-current
* process. cr25 contains the Page Directory of the current user
@@ -175,9 +179,8 @@
{
BUG_ON(!vma->vm_mm->context);
- if(likely(translation_exists(vma, vmaddr)))
+ if (likely(translation_exists(vma, vmaddr, pfn)))
__flush_cache_page(vma, vmaddr);
}
#endif
-
diff --git a/include/asm-parisc/dma-mapping.h b/include/asm-parisc/dma-mapping.h
index 4db84f9..74d4ac6 100644
--- a/include/asm-parisc/dma-mapping.h
+++ b/include/asm-parisc/dma-mapping.h
@@ -9,8 +9,8 @@
/* See Documentation/DMA-mapping.txt */
struct hppa_dma_ops {
int (*dma_supported)(struct device *dev, u64 mask);
- void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, int flag);
- void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, int flag);
+ void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
+ void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
void (*free_consistent)(struct device *dev, size_t size, void *vaddr, dma_addr_t iova);
dma_addr_t (*map_single)(struct device *dev, void *addr, size_t size, enum dma_data_direction direction);
void (*unmap_single)(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction direction);
@@ -49,14 +49,14 @@
static inline void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- int flag)
+ gfp_t flag)
{
return hppa_dma_ops->alloc_consistent(dev, size, dma_handle, flag);
}
static inline void *
dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- int flag)
+ gfp_t flag)
{
return hppa_dma_ops->alloc_noncoherent(dev, size, dma_handle, flag);
}
diff --git a/include/asm-parisc/errno.h b/include/asm-parisc/errno.h
index 08464c4..e2f3ddc 100644
--- a/include/asm-parisc/errno.h
+++ b/include/asm-parisc/errno.h
@@ -114,6 +114,7 @@
#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */
#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */
+#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */
/* for robust mutexes */
#define EOWNERDEAD 254 /* Owner died */
diff --git a/include/asm-parisc/grfioctl.h b/include/asm-parisc/grfioctl.h
index d3cfc01..6a91031 100644
--- a/include/asm-parisc/grfioctl.h
+++ b/include/asm-parisc/grfioctl.h
@@ -69,6 +69,8 @@
#define CRT_ID_TVRX S9000_ID_98765 /* TVRX (gto/falcon) */
#define CRT_ID_ARTIST S9000_ID_ARTIST /* Artist */
#define CRT_ID_SUMMIT 0x2FC1066B /* Summit FX2, FX4, FX6 ... */
+#define CRT_ID_LEGO 0x35ACDA30 /* Lego FX5, FX10 ... */
+#define CRT_ID_PINNACLE 0x35ACDA16 /* Pinnacle FXe */
/* structure for ioctl(GCDESCRIBE) */
diff --git a/include/asm-parisc/ide.h b/include/asm-parisc/ide.h
index 3243cf2..b27bf7a 100644
--- a/include/asm-parisc/ide.h
+++ b/include/asm-parisc/ide.h
@@ -22,7 +22,6 @@
#define ide_request_irq(irq,hand,flg,dev,id) request_irq((irq),(hand),(flg),(dev),(id))
#define ide_free_irq(irq,dev_id) free_irq((irq), (dev_id))
-#define ide_check_region(from,extent) check_region((from), (extent))
#define ide_request_region(from,extent,name) request_region((from), (extent), (name))
#define ide_release_region(from,extent) release_region((from), (extent))
/* Generic I/O and MEMIO string operations. */
diff --git a/include/asm-parisc/led.h b/include/asm-parisc/led.h
index 1ac8ab6..efadfd5 100644
--- a/include/asm-parisc/led.h
+++ b/include/asm-parisc/led.h
@@ -23,9 +23,6 @@
#define LED_CMD_REG_NONE 0 /* NULL == no addr for the cmd register */
-/* led tasklet struct */
-extern struct tasklet_struct led_tasklet;
-
/* register_led_driver() */
int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long data_reg);
diff --git a/include/asm-parisc/mmzone.h b/include/asm-parisc/mmzone.h
index 595d3dc..ae039f4 100644
--- a/include/asm-parisc/mmzone.h
+++ b/include/asm-parisc/mmzone.h
@@ -27,12 +27,6 @@
})
#define node_localnr(pfn, nid) ((pfn) - node_start_pfn(nid))
-#define local_mapnr(kvaddr) \
-({ \
- unsigned long __pfn = __pa(kvaddr) >> PAGE_SHIFT; \
- (__pfn - node_start_pfn(pfn_to_nid(__pfn))); \
-})
-
#define pfn_to_page(pfn) \
({ \
unsigned long __pfn = (pfn); \
diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h
index ef69ab4..1d247e3 100644
--- a/include/asm-parisc/parisc-device.h
+++ b/include/asm-parisc/parisc-device.h
@@ -1,7 +1,7 @@
#include <linux/device.h>
struct parisc_device {
- unsigned long hpa; /* Hard Physical Address */
+ struct resource hpa; /* Hard Physical Address */
struct parisc_device_id id;
struct parisc_driver *driver; /* Driver for this device */
char name[80]; /* The hardware description */
@@ -39,6 +39,11 @@
#define to_parisc_driver(d) container_of(d, struct parisc_driver, drv)
#define parisc_parent(d) to_parisc_device(d->dev.parent)
+static inline char *parisc_pathname(struct parisc_device *d)
+{
+ return d->dev.bus_id;
+}
+
static inline void
parisc_set_drvdata(struct parisc_device *d, void *p)
{
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
index d0b761f..fa39d07 100644
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -69,7 +69,7 @@
#define PCI_PORT_HBA(a) ((a) >> HBA_PORT_SPACE_BITS)
#define PCI_PORT_ADDR(a) ((a) & (HBA_PORT_SPACE_SIZE - 1))
-#if CONFIG_64BIT
+#ifdef CONFIG_64BIT
#define PCI_F_EXTEND 0xffffffff00000000UL
#define PCI_IS_LMMIO(hba,a) pci_is_lmmio(hba,a)
diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
index 820c6e7..c28fb6f 100644
--- a/include/asm-parisc/pgtable.h
+++ b/include/asm-parisc/pgtable.h
@@ -501,6 +501,8 @@
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)
+
#define MK_IOSPACE_PFN(space, pfn) (pfn)
#define GET_IOSPACE(pfn) 0
#define GET_PFN(pfn) (pfn)
diff --git a/include/asm-parisc/processor.h b/include/asm-parisc/processor.h
index a9dfadd..aae40e8 100644
--- a/include/asm-parisc/processor.h
+++ b/include/asm-parisc/processor.h
@@ -122,8 +122,27 @@
};
/* Thread struct flags. */
+#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */
+#define PARISC_UAC_SIGBUS (1UL << 1)
#define PARISC_KERNEL_DEATH (1UL << 31) /* see die_if_kernel()... */
+#define PARISC_UAC_SHIFT 0
+#define PARISC_UAC_MASK (PARISC_UAC_NOPRINT|PARISC_UAC_SIGBUS)
+
+#define SET_UNALIGN_CTL(task,value) \
+ ({ \
+ (task)->thread.flags = (((task)->thread.flags & ~PARISC_UAC_MASK) \
+ | (((value) << PARISC_UAC_SHIFT) & \
+ PARISC_UAC_MASK)); \
+ 0; \
+ })
+
+#define GET_UNALIGN_CTL(task,addr) \
+ ({ \
+ put_user(((task)->thread.flags & PARISC_UAC_MASK) \
+ >> PARISC_UAC_SHIFT, (int __user *) (addr)); \
+ })
+
#define INIT_THREAD { \
regs: { gr: { 0, }, \
fr: { 0, }, \
diff --git a/include/asm-parisc/psw.h b/include/asm-parisc/psw.h
index 5132302..4334d6c 100644
--- a/include/asm-parisc/psw.h
+++ b/include/asm-parisc/psw.h
@@ -1,4 +1,7 @@
#ifndef _PARISC_PSW_H
+
+#include <linux/config.h>
+
#define PSW_I 0x00000001
#define PSW_D 0x00000002
#define PSW_P 0x00000004
@@ -9,6 +12,16 @@
#define PSW_G 0x00000040 /* PA1.x only */
#define PSW_O 0x00000080 /* PA2.0 only */
+/* ssm/rsm instructions number PSW_W and PSW_E differently */
+#define PSW_SM_I PSW_I /* Enable External Interrupts */
+#define PSW_SM_D PSW_D
+#define PSW_SM_P PSW_P
+#define PSW_SM_Q PSW_Q /* Enable Interrupt State Collection */
+#define PSW_SM_R PSW_R /* Enable Recover Counter Trap */
+#define PSW_SM_W 0x200 /* PA2.0 only : Enable Wide Mode */
+
+#define PSW_SM_QUIET PSW_SM_R+PSW_SM_Q+PSW_SM_P+PSW_SM_D+PSW_SM_I
+
#define PSW_CB 0x0000ff00
#define PSW_M 0x00010000
@@ -30,33 +43,21 @@
#define PSW_Z 0x40000000 /* PA1.x only */
#define PSW_Y 0x80000000 /* PA1.x only */
-#ifdef __LP64__
-#define PSW_HI_CB 0x000000ff /* PA2.0 only */
+#ifdef CONFIG_64BIT
+# define PSW_HI_CB 0x000000ff /* PA2.0 only */
#endif
-/* PSW bits to be used with ssm/rsm */
-#define PSW_SM_I 0x1
-#define PSW_SM_D 0x2
-#define PSW_SM_P 0x4
-#define PSW_SM_Q 0x8
-#define PSW_SM_R 0x10
-#define PSW_SM_F 0x20
-#define PSW_SM_G 0x40
-#define PSW_SM_O 0x80
-#define PSW_SM_E 0x100
-#define PSW_SM_W 0x200
-
-#ifdef __LP64__
-# define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
-# define KERNEL_PSW (PSW_W | PSW_C | PSW_Q | PSW_P | PSW_D)
-# define REAL_MODE_PSW (PSW_W | PSW_Q)
-# define USER_PSW_MASK (PSW_W | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
-# define USER_PSW_HI_MASK (PSW_HI_CB)
-#else
-# define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
-# define KERNEL_PSW (PSW_C | PSW_Q | PSW_P | PSW_D)
-# define REAL_MODE_PSW (PSW_Q)
-# define USER_PSW_MASK (PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#ifdef CONFIG_64BIT
+# define USER_PSW_HI_MASK PSW_HI_CB
+# define WIDE_PSW PSW_W
+#else
+# define WIDE_PSW 0
#endif
+/* Used when setting up for rfi */
+#define KERNEL_PSW (WIDE_PSW | PSW_C | PSW_Q | PSW_P | PSW_D)
+#define REAL_MODE_PSW (WIDE_PSW | PSW_Q)
+#define USER_PSW_MASK (WIDE_PSW | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
+
#endif
diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h
index 3f428aa..93f990e 100644
--- a/include/asm-parisc/ptrace.h
+++ b/include/asm-parisc/ptrace.h
@@ -49,7 +49,7 @@
#define user_mode(regs) (((regs)->iaoq[0] & 3) ? 1 : 0)
#define user_space(regs) (((regs)->iasq[1] != 0) ? 1 : 0)
#define instruction_pointer(regs) ((regs)->iaoq[0] & ~3)
-#define profile_pc(regs) instruction_pointer(regs)
+unsigned long profile_pc(struct pt_regs *);
extern void show_regs(struct pt_regs *);
#endif
diff --git a/include/asm-parisc/semaphore.h b/include/asm-parisc/semaphore.h
index f78bb2e..c9ee41c 100644
--- a/include/asm-parisc/semaphore.h
+++ b/include/asm-parisc/semaphore.h
@@ -49,9 +49,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-parisc/spinlock.h b/include/asm-parisc/spinlock.h
index 43eaa6e..7c3f406 100644
--- a/include/asm-parisc/spinlock.h
+++ b/include/asm-parisc/spinlock.h
@@ -5,11 +5,6 @@
#include <asm/processor.h>
#include <asm/spinlock_types.h>
-/* Note that PA-RISC has to use `1' to mean unlocked and `0' to mean locked
- * since it only has load-and-zero. Moreover, at least on some PA processors,
- * the semaphore address has to be 16-byte aligned.
- */
-
static inline int __raw_spin_is_locked(raw_spinlock_t *x)
{
volatile unsigned int *a = __ldcw_align(x);
diff --git a/include/asm-parisc/spinlock_types.h b/include/asm-parisc/spinlock_types.h
index 785bba8..d6b479b 100644
--- a/include/asm-parisc/spinlock_types.h
+++ b/include/asm-parisc/spinlock_types.h
@@ -6,11 +6,15 @@
#endif
typedef struct {
+#ifdef CONFIG_PA20
+ volatile unsigned int slock;
+# define __RAW_SPIN_LOCK_UNLOCKED { 1 }
+#else
volatile unsigned int lock[4];
+# define __RAW_SPIN_LOCK_UNLOCKED { { 1, 1, 1, 1 } }
+#endif
} raw_spinlock_t;
-#define __RAW_SPIN_LOCK_UNLOCKED { { 1, 1, 1, 1 } }
-
typedef struct {
raw_spinlock_t lock;
volatile int counter;
diff --git a/include/asm-parisc/system.h b/include/asm-parisc/system.h
index 26ff844..f3928d3 100644
--- a/include/asm-parisc/system.h
+++ b/include/asm-parisc/system.h
@@ -138,13 +138,7 @@
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
-#define __ldcw(a) ({ \
- unsigned __ret; \
- __asm__ __volatile__("ldcw 0(%1),%0" : "=r" (__ret) : "r" (a)); \
- __ret; \
-})
-
+#ifndef CONFIG_PA20
/* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
and GCC only guarantees 8-byte alignment for stack locals, we can't
be assured of 16-byte alignment for atomic lock data even if we
@@ -152,37 +146,41 @@
we use a struct containing an array of four ints for the atomic lock
type and dynamically select the 16-byte aligned int from the array
for the semaphore. */
+
#define __PA_LDCW_ALIGNMENT 16
#define __ldcw_align(a) ({ \
unsigned long __ret = (unsigned long) &(a)->lock[0]; \
__ret = (__ret + __PA_LDCW_ALIGNMENT - 1) & ~(__PA_LDCW_ALIGNMENT - 1); \
(volatile unsigned int *) __ret; \
})
+#define LDCW "ldcw"
+
+#else /*CONFIG_PA20*/
+/* From: "Jim Hull" <jim.hull of hp.com>
+ I've attached a summary of the change, but basically, for PA 2.0, as
+ long as the ",CO" (coherent operation) completer is specified, then the
+ 16-byte alignment requirement for ldcw and ldcd is relaxed, and instead
+ they only require "natural" alignment (4-byte for ldcw, 8-byte for
+ ldcd). */
+
+#define __PA_LDCW_ALIGNMENT 4
+#define __ldcw_align(a) ((volatile unsigned int *)a)
+#define LDCW "ldcw,co"
+
+#endif /*!CONFIG_PA20*/
+
+/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
+#define __ldcw(a) ({ \
+ unsigned __ret; \
+ __asm__ __volatile__(LDCW " 0(%1),%0" : "=r" (__ret) : "r" (a)); \
+ __ret; \
+})
#ifdef CONFIG_SMP
# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
#endif
#define KERNEL_START (0x10100000 - 0x1000)
-
-/* This is for the serialisation of PxTLB broadcasts. At least on the
- * N class systems, only one PxTLB inter processor broadcast can be
- * active at any one time on the Merced bus. This tlb purge
- * synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class. */
-#ifdef CONFIG_SMP
-extern spinlock_t pa_tlb_lock;
-
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
-
-#else
-
-#define purge_tlb_start(x) do { } while(0)
-#define purge_tlb_end(x) do { } while (0)
-
-#endif
-
#define arch_align_stack(x) (x)
#endif
diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h
index eb27b78..e97aa8d 100644
--- a/include/asm-parisc/tlbflush.h
+++ b/include/asm-parisc/tlbflush.h
@@ -7,6 +7,26 @@
#include <linux/mm.h>
#include <asm/mmu_context.h>
+
+/* This is for the serialisation of PxTLB broadcasts. At least on the
+ * N class systems, only one PxTLB inter processor broadcast can be
+ * active at any one time on the Merced bus. This tlb purge
+ * synchronisation is fairly lightweight and harmless so we activate
+ * it on all SMP systems not just the N class. */
+#ifdef CONFIG_SMP
+extern spinlock_t pa_tlb_lock;
+
+#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
+#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+
+#else
+
+#define purge_tlb_start(x) do { } while(0)
+#define purge_tlb_end(x) do { } while (0)
+
+#endif
+
+
extern void flush_tlb_all(void);
/*
@@ -64,29 +84,27 @@
{
unsigned long npages;
-
npages = ((end - (start & PAGE_MASK)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (npages >= 512) /* XXX arbitrary, should be tuned */
+ if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */
flush_tlb_all();
else {
-
+ preempt_disable();
mtsp(vma->vm_mm->context,1);
+ purge_tlb_start();
if (split_tlb) {
- purge_tlb_start();
while (npages--) {
pdtlb(start);
pitlb(start);
start += PAGE_SIZE;
}
- purge_tlb_end();
} else {
- purge_tlb_start();
while (npages--) {
pdtlb(start);
start += PAGE_SIZE;
}
- purge_tlb_end();
+ preempt_enable();
}
+ purge_tlb_end();
}
}
diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h
index d21b9d0..34fdce3 100644
--- a/include/asm-parisc/types.h
+++ b/include/asm-parisc/types.h
@@ -33,8 +33,10 @@
#ifdef __LP64__
#define BITS_PER_LONG 64
+#define SHIFT_PER_LONG 6
#else
#define BITS_PER_LONG 32
+#define SHIFT_PER_LONG 5
#endif
#ifndef __ASSEMBLY__
diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h
index 6a9f0ca..80b7b98 100644
--- a/include/asm-parisc/unistd.h
+++ b/include/asm-parisc/unistd.h
@@ -687,8 +687,8 @@
#define __NR_shmget (__NR_Linux + 194)
#define __NR_shmctl (__NR_Linux + 195)
-#define __NR_getpmsg (__NR_Linux + 196) /* some people actually want streams */
-#define __NR_putpmsg (__NR_Linux + 197) /* some people actually want streams */
+#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */
+#define __NR_putpmsg (__NR_Linux + 197)
#define __NR_lstat64 (__NR_Linux + 198)
#define __NR_truncate64 (__NR_Linux + 199)
@@ -755,8 +755,14 @@
#define __NR_mbind (__NR_Linux + 260)
#define __NR_get_mempolicy (__NR_Linux + 261)
#define __NR_set_mempolicy (__NR_Linux + 262)
+#define __NR_vserver (__NR_Linux + 263)
+#define __NR_add_key (__NR_Linux + 264)
+#define __NR_request_key (__NR_Linux + 265)
+#define __NR_keyctl (__NR_Linux + 266)
+#define __NR_ioprio_set (__NR_Linux + 267)
+#define __NR_ioprio_get (__NR_Linux + 268)
-#define __NR_Linux_syscalls 263
+#define __NR_Linux_syscalls 269
#define HPUX_GATEWAY_ADDR 0xC0000004
#define LINUX_GATEWAY_ADDR 0x100
@@ -807,10 +813,10 @@
#define K_INLINE_SYSCALL(name, nr, args...) ({ \
long __sys_res; \
{ \
- register unsigned long __res asm("r28"); \
+ register unsigned long __res __asm__("r28"); \
K_LOAD_ARGS_##nr(args) \
/* FIXME: HACK stw/ldw r19 around syscall */ \
- asm volatile( \
+ __asm__ volatile( \
K_STW_ASM_PIC \
" ble 0x100(%%sr2, %%r0)\n" \
" ldi %1, %%r20\n" \
@@ -1005,7 +1011,6 @@
struct pt_regs *regs);
int sys_vfork(struct pt_regs *regs);
int sys_pipe(int *fildes);
-long sys_ptrace(long request, pid_t pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h
index 0a5b83a..79bae49 100644
--- a/include/asm-powerpc/rwsem.h
+++ b/include/asm-powerpc/rwsem.h
@@ -159,5 +159,10 @@
return atomic_add_return(delta, (atomic_t *)(&sem->count));
}
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_RWSEM_H */
diff --git a/include/asm-powerpc/semaphore.h b/include/asm-powerpc/semaphore.h
index fd42fe9..57369d2 100644
--- a/include/asm-powerpc/semaphore.h
+++ b/include/asm-powerpc/semaphore.h
@@ -31,9 +31,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name, 1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index c2d039e..0991dfc 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -486,7 +486,6 @@
unsigned long p4, unsigned long p5, unsigned long p6,
struct pt_regs *regs);
int sys_pipe(int __user *fildes);
-int sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
long sys_rt_sigaction(int sig, const struct sigaction __user *act,
struct sigaction __user *oact, size_t sigsetsize);
diff --git a/include/asm-ppc/dma-mapping.h b/include/asm-ppc/dma-mapping.h
index 061bfca..6e96351 100644
--- a/include/asm-ppc/dma-mapping.h
+++ b/include/asm-ppc/dma-mapping.h
@@ -19,7 +19,7 @@
* allocate the space "normally" and use the cache management functions
* to ensure it is consistent.
*/
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp);
+extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
extern void __dma_free_coherent(size_t size, void *vaddr);
extern void __dma_sync(void *vaddr, size_t size, int direction);
extern void __dma_sync_page(struct page *page, unsigned long offset,
diff --git a/include/asm-ppc64/mmzone.h b/include/asm-ppc64/mmzone.h
index ed473f4..80a708e 100644
--- a/include/asm-ppc64/mmzone.h
+++ b/include/asm-ppc64/mmzone.h
@@ -67,9 +67,6 @@
#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn)
-#define local_mapnr(kvaddr) \
- ( (__pa(kvaddr) >> PAGE_SHIFT) - node_start_pfn(kvaddr_to_nid(kvaddr))
-
#ifdef CONFIG_DISCONTIGMEM
/*
diff --git a/include/asm-ppc64/pgtable.h b/include/asm-ppc64/pgtable.h
index 8cf5991..8c3f574 100644
--- a/include/asm-ppc64/pgtable.h
+++ b/include/asm-ppc64/pgtable.h
@@ -478,10 +478,12 @@
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
#define pmd_ERROR(e) \
printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
#define pud_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pud_val(e))
+ printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
diff --git a/include/asm-s390/rwsem.h b/include/asm-s390/rwsem.h
index 8c0cebb..0422a08 100644
--- a/include/asm-s390/rwsem.h
+++ b/include/asm-s390/rwsem.h
@@ -351,5 +351,10 @@
return new;
}
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
#endif /* __KERNEL__ */
#endif /* _S390_RWSEM_H */
diff --git a/include/asm-s390/semaphore.h b/include/asm-s390/semaphore.h
index 873def6..702cf43 100644
--- a/include/asm-s390/semaphore.h
+++ b/include/asm-s390/semaphore.h
@@ -29,9 +29,6 @@
#define __SEMAPHORE_INITIALIZER(name,count) \
{ ATOMIC_INIT(count), __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) }
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
index 0d51c48..348a881 100644
--- a/include/asm-s390/setup.h
+++ b/include/asm-s390/setup.h
@@ -8,11 +8,14 @@
#ifndef _ASM_S390_SETUP_H
#define _ASM_S390_SETUP_H
+#include <asm/types.h>
+
#define PARMAREA 0x10400
#define COMMAND_LINE_SIZE 896
#define RAMDISK_ORIGIN 0x800000
#define RAMDISK_SIZE 0x800000
#define MEMORY_CHUNKS 16 /* max 0x7fff */
+#define IPL_PARMBLOCK_ORIGIN 0x2000
#ifndef __ASSEMBLY__
@@ -64,6 +67,53 @@
#define SET_CONSOLE_3215 do { console_mode = 2; } while (0)
#define SET_CONSOLE_3270 do { console_mode = 3; } while (0)
+struct ipl_list_header {
+ u32 length;
+ u8 reserved[3];
+ u8 version;
+} __attribute__((packed));
+
+struct ipl_block_fcp {
+ u32 length;
+ u8 pbt;
+ u8 reserved1[322-1];
+ u16 devno;
+ u8 reserved2[4];
+ u64 wwpn;
+ u64 lun;
+ u32 bootprog;
+ u8 reserved3[12];
+ u64 br_lba;
+ u32 scp_data_len;
+ u8 reserved4[260];
+ u8 scp_data[];
+} __attribute__((packed));
+
+struct ipl_parameter_block {
+ union {
+ u32 length;
+ struct ipl_list_header header;
+ } hdr;
+ struct ipl_block_fcp fcp;
+} __attribute__((packed));
+
+#define IPL_MAX_SUPPORTED_VERSION (0)
+
+#define IPL_TYPE_FCP (0)
+
+/*
+ * IPL validity flags and parameters as detected in head.S
+ */
+extern u32 ipl_parameter_flags;
+extern u16 ipl_devno;
+
+#define IPL_DEVNO_VALID (ipl_parameter_flags & 1)
+#define IPL_PARMBLOCK_VALID (ipl_parameter_flags & 2)
+
+#define IPL_PARMBLOCK_START ((struct ipl_parameter_block *) \
+ IPL_PARMBLOCK_ORIGIN)
+#define IPL_PARMBLOCK_SIZE (IPL_PARMBLOCK_START->hdr.length)
+
#else
#ifndef __s390x__
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 221e965..f97d926 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -590,7 +590,6 @@
asmlinkage long sys_fork(struct pt_regs regs);
asmlinkage long sys_vfork(struct pt_regs regs);
asmlinkage long sys_pipe(unsigned long __user *fildes);
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h
index 80d164c..d3fa5c2 100644
--- a/include/asm-sh/dma-mapping.h
+++ b/include/asm-sh/dma-mapping.h
@@ -9,7 +9,7 @@
extern struct bus_type pci_bus_type;
/* arch/sh/mm/consistent.c */
-extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
+extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle);
extern void consistent_free(void *vaddr, size_t size);
extern void consistent_sync(void *vaddr, size_t size, int direction);
@@ -26,7 +26,7 @@
}
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
if (sh_mv.mv_consistent_alloc) {
void *ret;
diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h
index 5771f4b..3f18aa1 100644
--- a/include/asm-sh/machvec.h
+++ b/include/asm-sh/machvec.h
@@ -64,7 +64,7 @@
void (*mv_heartbeat)(void);
- void *(*mv_consistent_alloc)(struct device *, size_t, dma_addr_t *, int);
+ void *(*mv_consistent_alloc)(struct device *, size_t, dma_addr_t *, gfp_t);
int (*mv_consistent_free)(struct device *, size_t, void *, dma_addr_t);
};
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
index 0f4bcaa..aef8ae4 100644
--- a/include/asm-sh/pgtable.h
+++ b/include/asm-sh/pgtable.h
@@ -224,8 +224,6 @@
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
-
#define pmd_page_kernel(pmd) \
((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
diff --git a/include/asm-sh/rwsem.h b/include/asm-sh/rwsem.h
index 1be4337..0262d3d 100644
--- a/include/asm-sh/rwsem.h
+++ b/include/asm-sh/rwsem.h
@@ -166,5 +166,10 @@
return atomic_add_return(delta, (atomic_t *)(&sem->count));
}
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
#endif /* __KERNEL__ */
#endif /* _ASM_SH_RWSEM_H */
diff --git a/include/asm-sh/semaphore.h b/include/asm-sh/semaphore.h
index b923a77..489f784 100644
--- a/include/asm-sh/semaphore.h
+++ b/include/asm-sh/semaphore.h
@@ -33,9 +33,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h
index ea89e8f..f2c8e14 100644
--- a/include/asm-sh/unistd.h
+++ b/include/asm-sh/unistd.h
@@ -503,7 +503,6 @@
asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs regs);
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char *buf,
size_t count, long dummy, loff_t pos);
asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char *buf,
diff --git a/include/asm-sh64/dma-mapping.h b/include/asm-sh64/dma-mapping.h
index b8d26fe..cc9a2e8 100644
--- a/include/asm-sh64/dma-mapping.h
+++ b/include/asm-sh64/dma-mapping.h
@@ -25,7 +25,7 @@
}
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
return consistent_alloc(NULL, size, dma_handle);
}
diff --git a/include/asm-sh64/pgtable.h b/include/asm-sh64/pgtable.h
index 51db430..51b0581 100644
--- a/include/asm-sh64/pgtable.h
+++ b/include/asm-sh64/pgtable.h
@@ -457,9 +457,6 @@
extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
-#define page_pte_prot(page, prot) mk_pte(page, prot)
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
-
typedef pte_t *pte_addr_t;
#define pgtable_cache_init() do { } while (0)
diff --git a/include/asm-sh64/semaphore.h b/include/asm-sh64/semaphore.h
index fce22bb..4695264 100644
--- a/include/asm-sh64/semaphore.h
+++ b/include/asm-sh64/semaphore.h
@@ -40,9 +40,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h
index 2dc5bb8..d7c3b0f 100644
--- a/include/asm-sparc/dma-mapping.h
+++ b/include/asm-sparc/dma-mapping.h
@@ -8,7 +8,7 @@
#else
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
BUG();
return NULL;
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
index caf9261..7a941b8 100644
--- a/include/asm-sparc/floppy.h
+++ b/include/asm-sparc/floppy.h
@@ -17,10 +17,8 @@
/* We don't need no stinkin' I/O port allocation crap. */
#undef release_region
-#undef check_region
#undef request_region
#define release_region(X, Y) do { } while(0)
-#define check_region(X, Y) (0)
#define request_region(X, Y, Z) (1)
/* References:
diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h
index a14e986..b33c354 100644
--- a/include/asm-sparc/pgtable.h
+++ b/include/asm-sparc/pgtable.h
@@ -255,8 +255,6 @@
#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
-#define page_pte_prot(page, prot) mk_pte(page, prot)
-#define page_pte(page) mk_pte(page, __pgprot(0))
#define pfn_pte(pfn, prot) mk_pte(pfn_to_page(pfn), prot)
BTFIXUPDEF_CALL(unsigned long, pte_pfn, pte_t)
diff --git a/include/asm-sparc/semaphore.h b/include/asm-sparc/semaphore.h
index 60ac5fd..f74ba31 100644
--- a/include/asm-sparc/semaphore.h
+++ b/include/asm-sparc/semaphore.h
@@ -22,9 +22,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
index 1c5da41..c7d5804 100644
--- a/include/asm-sparc64/dma-mapping.h
+++ b/include/asm-sparc64/dma-mapping.h
@@ -10,7 +10,7 @@
struct device;
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
BUG();
return NULL;
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
index 8c6dfc6c..9a02879 100644
--- a/include/asm-sparc64/pgtable.h
+++ b/include/asm-sparc64/pgtable.h
@@ -231,9 +231,6 @@
#define pte_pfn(x) ((pte_val(x) & _PAGE_PADDR)>>PAGE_SHIFT)
#define pte_page(x) pfn_to_page(pte_pfn(x))
-#define page_pte_prot(page, prot) mk_pte(page, prot)
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
-
static inline pte_t pte_modify(pte_t orig_pte, pgprot_t new_prot)
{
pte_t __pte;
diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
index 4568ee4..cef5e82 100644
--- a/include/asm-sparc64/rwsem.h
+++ b/include/asm-sparc64/rwsem.h
@@ -56,6 +56,11 @@
atomic_add(delta, (atomic_t *)(&sem->count));
}
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
#endif /* __KERNEL__ */
#endif /* _SPARC64_RWSEM_H */
diff --git a/include/asm-sparc64/semaphore.h b/include/asm-sparc64/semaphore.h
index 7419dd8..093dcc6 100644
--- a/include/asm-sparc64/semaphore.h
+++ b/include/asm-sparc64/semaphore.h
@@ -22,9 +22,6 @@
{ ATOMIC_INIT(count), \
__WAIT_QUEUE_HEAD_INITIALIZER((name).wait) }
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name, 1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-sparc64/tlb.h b/include/asm-sparc64/tlb.h
index 9baf57d..66138d9 100644
--- a/include/asm-sparc64/tlb.h
+++ b/include/asm-sparc64/tlb.h
@@ -25,9 +25,8 @@
struct mm_struct *mm;
unsigned int pages_nr;
unsigned int need_flush;
- unsigned int tlb_frozen;
+ unsigned int fullmm;
unsigned int tlb_nr;
- unsigned long freed;
unsigned long vaddrs[TLB_BATCH_NR];
struct page *pages[FREE_PTE_NR];
};
@@ -44,14 +43,13 @@
static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
{
- struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
+ struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
BUG_ON(mp->tlb_nr);
mp->mm = mm;
mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U;
- mp->tlb_frozen = full_mm_flush;
- mp->freed = 0;
+ mp->fullmm = full_mm_flush;
return mp;
}
@@ -78,30 +76,19 @@
static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end)
{
- unsigned long freed = mp->freed;
- struct mm_struct *mm = mp->mm;
- unsigned long rss = get_mm_counter(mm, rss);
-
- if (rss < freed)
- freed = rss;
- add_mm_counter(mm, rss, -freed);
-
tlb_flush_mmu(mp);
- if (mp->tlb_frozen) {
- if (CTX_VALID(mm->context))
- do_flush_tlb_mm(mm);
- mp->tlb_frozen = 0;
+ if (mp->fullmm) {
+ if (CTX_VALID(mp->mm->context))
+ do_flush_tlb_mm(mp->mm);
+ mp->fullmm = 0;
} else
flush_tlb_pending();
/* keep the page table cache within bounds */
check_pgt_cache();
-}
-static inline unsigned int tlb_is_full_mm(struct mmu_gather *mp)
-{
- return mp->tlb_frozen;
+ put_cpu_var(mmu_gathers);
}
static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
diff --git a/include/asm-um/cache.h b/include/asm-um/cache.h
index 4b134fe..a10602a 100644
--- a/include/asm-um/cache.h
+++ b/include/asm-um/cache.h
@@ -1,10 +1,21 @@
#ifndef __UM_CACHE_H
#define __UM_CACHE_H
-/* These are x86 numbers */
-#define L1_CACHE_SHIFT 5
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+#include <linux/config.h>
-#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
+#if defined(CONFIG_UML_X86) && !defined(CONFIG_64BIT)
+# define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT)
+#elif defined(CONFIG_UML_X86) /* 64-bit */
+# define L1_CACHE_SHIFT 6 /* Should be 7 on Intel */
+#else
+/* XXX: this was taken from x86, now it's completely random. Luckily only
+ * affects SMP padding. */
+# define L1_CACHE_SHIFT 5
+#endif
+
+/* XXX: this is valid for x86 and x86_64. */
+#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
+
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#endif
diff --git a/include/asm-um/dma-mapping.h b/include/asm-um/dma-mapping.h
index 13e6291..babd298 100644
--- a/include/asm-um/dma-mapping.h
+++ b/include/asm-um/dma-mapping.h
@@ -19,7 +19,7 @@
static inline void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- int flag)
+ gfp_t flag)
{
BUG();
return((void *) 0);
diff --git a/include/asm-um/linkage.h b/include/asm-um/linkage.h
index 7dfce37..e3d62dc 100644
--- a/include/asm-um/linkage.h
+++ b/include/asm-um/linkage.h
@@ -3,4 +3,12 @@
#include "asm/arch/linkage.h"
+#include <linux/config.h>
+
+/* <linux/linkage.h> will pick sane defaults */
+#ifdef CONFIG_GPROF
+#undef FASTCALL
+#undef fastcall
+#endif
+
#endif
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 2c192ab..0229814 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -115,7 +115,7 @@
#define pfn_valid(pfn) ((pfn) < max_mapnr)
#define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
-extern struct page *arch_validate(struct page *page, int mask, int order);
+extern struct page *arch_validate(struct page *page, gfp_t mask, int order);
#define HAVE_ARCH_VALIDATE
extern void arch_free_page(struct page *page, int order);
diff --git a/include/asm-um/pgtable.h b/include/asm-um/pgtable.h
index 616d02b..ac64eb9 100644
--- a/include/asm-um/pgtable.h
+++ b/include/asm-um/pgtable.h
@@ -138,7 +138,7 @@
#define pte_clear(mm,addr,xp) pte_set_val(*(xp), (phys_t) 0, __pgprot(_PAGE_NEWPAGE))
-#define pmd_none(x) (!(pmd_val(x) & ~_PAGE_NEWPAGE))
+#define pmd_none(x) (!((unsigned long)pmd_val(x) & ~_PAGE_NEWPAGE))
#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
#define pmd_clear(xp) do { pmd_val(*(xp)) = _PAGE_NEWPAGE; } while (0)
diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h
index c514062..df6cdec 100644
--- a/include/asm-v850/semaphore.h
+++ b/include/asm-v850/semaphore.h
@@ -18,9 +18,6 @@
{ ATOMIC_INIT (count), 0, \
__WAIT_QUEUE_HEAD_INITIALIZER ((name).wait) }
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER (name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER (name,count)
diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h
index 3b55209..5a86f8e 100644
--- a/include/asm-v850/unistd.h
+++ b/include/asm-v850/unistd.h
@@ -452,7 +452,6 @@
struct pt_regs;
int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs);
int sys_pipe (int *fildes);
-int sys_ptrace(long request, long pid, long addr, long data);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
diff --git a/include/asm-x86_64/dma-mapping.h b/include/asm-x86_64/dma-mapping.h
index e784fdc..54a380e 100644
--- a/include/asm-x86_64/dma-mapping.h
+++ b/include/asm-x86_64/dma-mapping.h
@@ -17,7 +17,7 @@
(swiotlb ? swiotlb_dma_mapping_error(x) : ((x) == bad_dma_address))
void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- unsigned gfp);
+ gfp_t gfp);
void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle);
diff --git a/include/asm-x86_64/mtrr.h b/include/asm-x86_64/mtrr.h
index c5959d6..66ac1c0 100644
--- a/include/asm-x86_64/mtrr.h
+++ b/include/asm-x86_64/mtrr.h
@@ -25,6 +25,7 @@
#include <linux/config.h>
#include <linux/ioctl.h>
+#include <linux/compat.h>
#define MTRR_IOCTL_BASE 'M'
@@ -105,4 +106,36 @@
#endif
+#ifdef CONFIG_COMPAT
+
+struct mtrr_sentry32
+{
+ compat_ulong_t base; /* Base address */
+ compat_uint_t size; /* Size of region */
+ compat_uint_t type; /* Type of region */
+};
+
+struct mtrr_gentry32
+{
+ compat_ulong_t regnum; /* Register number */
+ compat_uint_t base; /* Base address */
+ compat_uint_t size; /* Size of region */
+ compat_uint_t type; /* Type of region */
+};
+
+#define MTRR_IOCTL_BASE 'M'
+
+#define MTRRIOC32_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry32)
+#define MTRRIOC32_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry32)
+#define MTRRIOC32_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry32)
+#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry32)
+#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry32)
+#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry32)
+
+#endif /* CONFIG_COMPAT */
+
#endif /* _LINUX_MTRR_H */
diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
index dd8711e..7a07196 100644
--- a/include/asm-x86_64/pgtable.h
+++ b/include/asm-x86_64/pgtable.h
@@ -318,8 +318,6 @@
* and a page entry and page directory to the page they refer to.
*/
-#define page_pte(page) page_pte_prot(page, __pgprot(0))
-
/*
* Level 4 access.
*/
diff --git a/include/asm-x86_64/rwsem.h b/include/asm-x86_64/rwsem.h
index c002175..46077e9 100644
--- a/include/asm-x86_64/rwsem.h
+++ b/include/asm-x86_64/rwsem.h
@@ -274,5 +274,10 @@
return tmp+delta;
}
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
#endif /* __KERNEL__ */
#endif /* _X8664_RWSEM_H */
diff --git a/include/asm-x86_64/semaphore.h b/include/asm-x86_64/semaphore.h
index f325e39..a389aa6 100644
--- a/include/asm-x86_64/semaphore.h
+++ b/include/asm-x86_64/semaphore.h
@@ -56,9 +56,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name,1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/asm-x86_64/swiotlb.h b/include/asm-x86_64/swiotlb.h
index 3629306..7cbfd10 100644
--- a/include/asm-x86_64/swiotlb.h
+++ b/include/asm-x86_64/swiotlb.h
@@ -27,7 +27,7 @@
int nents, int direction);
extern int swiotlb_dma_mapping_error(dma_addr_t dma_addr);
extern void *swiotlb_alloc_coherent (struct device *hwdev, size_t size,
- dma_addr_t *dma_handle, int flags);
+ dma_addr_t *dma_handle, gfp_t flags);
extern void swiotlb_free_coherent (struct device *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle);
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index 11ba931..3c494b6 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -780,8 +780,6 @@
#include <linux/types.h>
#include <asm/ptrace.h>
-asmlinkage long sys_ptrace(long request, long pid,
- unsigned long addr, long data);
asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs);
asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on);
struct sigaction;
diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h
index e86a206..c425f10 100644
--- a/include/asm-xtensa/dma-mapping.h
+++ b/include/asm-xtensa/dma-mapping.h
@@ -28,7 +28,7 @@
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag);
+ dma_addr_t *dma_handle, gfp_t flag);
void dma_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
diff --git a/include/asm-xtensa/semaphore.h b/include/asm-xtensa/semaphore.h
index 09e89ab..2a10e19 100644
--- a/include/asm-xtensa/semaphore.h
+++ b/include/asm-xtensa/semaphore.h
@@ -29,9 +29,6 @@
.wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
}
-#define __MUTEX_INITIALIZER(name) \
- __SEMAPHORE_INITIALIZER(name, 1)
-
#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
diff --git a/include/keys/user-type.h b/include/keys/user-type.h
new file mode 100644
index 0000000..26f6ec3
--- /dev/null
+++ b/include/keys/user-type.h
@@ -0,0 +1,47 @@
+/* user-type.h: User-defined key type
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _KEYS_USER_TYPE_H
+#define _KEYS_USER_TYPE_H
+
+#include <linux/key.h>
+#include <linux/rcupdate.h>
+
+/*****************************************************************************/
+/*
+ * the payload for a key of type "user"
+ * - once filled in and attached to a key:
+ * - the payload struct is invariant may not be changed, only replaced
+ * - the payload must be read with RCU procedures or with the key semaphore
+ * held
+ * - the payload may only be replaced with the key semaphore write-locked
+ * - the key's data length is the size of the actual data, not including the
+ * payload wrapper
+ */
+struct user_key_payload {
+ struct rcu_head rcu; /* RCU destructor */
+ unsigned short datalen; /* length of this data */
+ char data[0]; /* actual data */
+};
+
+extern struct key_type key_type_user;
+
+extern int user_instantiate(struct key *key, const void *data, size_t datalen);
+extern int user_duplicate(struct key *key, const struct key *source);
+extern int user_update(struct key *key, const void *data, size_t datalen);
+extern int user_match(const struct key *key, const void *criterion);
+extern void user_destroy(struct key *key);
+extern void user_describe(const struct key *user, struct seq_file *m);
+extern long user_read(const struct key *key,
+ char __user *buffer, size_t buflen);
+
+
+#endif /* _KEYS_USER_TYPE_H */
diff --git a/include/linux/ata.h b/include/linux/ata.h
index a5b74ef..d2873b7 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -42,13 +42,18 @@
ATA_SECT_SIZE = 512,
ATA_ID_WORDS = 256,
- ATA_ID_PROD_OFS = 27,
- ATA_ID_FW_REV_OFS = 23,
ATA_ID_SERNO_OFS = 10,
- ATA_ID_MAJOR_VER = 80,
- ATA_ID_PIO_MODES = 64,
+ ATA_ID_FW_REV_OFS = 23,
+ ATA_ID_PROD_OFS = 27,
+ ATA_ID_OLD_PIO_MODES = 51,
+ ATA_ID_FIELD_VALID = 53,
ATA_ID_MWDMA_MODES = 63,
+ ATA_ID_PIO_MODES = 64,
+ ATA_ID_EIDE_DMA_MIN = 65,
+ ATA_ID_EIDE_PIO = 67,
+ ATA_ID_EIDE_PIO_IORDY = 68,
ATA_ID_UDMA_MODES = 88,
+ ATA_ID_MAJOR_VER = 80,
ATA_ID_PIO4 = (1 << 1),
ATA_PCI_CTL_OFS = 2,
@@ -128,10 +133,15 @@
ATA_CMD_PIO_READ_EXT = 0x24,
ATA_CMD_PIO_WRITE = 0x30,
ATA_CMD_PIO_WRITE_EXT = 0x34,
+ ATA_CMD_READ_MULTI = 0xC4,
+ ATA_CMD_READ_MULTI_EXT = 0x29,
+ ATA_CMD_WRITE_MULTI = 0xC5,
+ ATA_CMD_WRITE_MULTI_EXT = 0x39,
ATA_CMD_SET_FEATURES = 0xEF,
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
+ ATA_CMD_INIT_DEV_PARAMS = 0x91,
/* SETFEATURES stuff */
SETFEATURES_XFER = 0x03,
@@ -146,14 +156,14 @@
XFER_MW_DMA_2 = 0x22,
XFER_MW_DMA_1 = 0x21,
XFER_MW_DMA_0 = 0x20,
+ XFER_SW_DMA_2 = 0x12,
+ XFER_SW_DMA_1 = 0x11,
+ XFER_SW_DMA_0 = 0x10,
XFER_PIO_4 = 0x0C,
XFER_PIO_3 = 0x0B,
XFER_PIO_2 = 0x0A,
XFER_PIO_1 = 0x09,
XFER_PIO_0 = 0x08,
- XFER_SW_DMA_2 = 0x12,
- XFER_SW_DMA_1 = 0x11,
- XFER_SW_DMA_0 = 0x10,
XFER_PIO_SLOW = 0x00,
/* ATAPI stuff */
@@ -181,6 +191,7 @@
ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */
ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
+ ATA_TFLAG_LBA = (1 << 4), /* enable LBA */
};
enum ata_tf_protocols {
@@ -250,7 +261,19 @@
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
-static inline int atapi_cdb_len(u16 *dev_id)
+static inline int ata_id_current_chs_valid(const u16 *id)
+{
+ /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
+ has not been issued to the device then the values of
+ id[54] to id[56] are vendor specific. */
+ return (id[53] & 0x01) && /* Current translation valid */
+ id[54] && /* cylinders in current translation */
+ id[55] && /* heads in current translation */
+ id[55] <= 16 &&
+ id[56]; /* sectors in current translation */
+}
+
+static inline int atapi_cdb_len(const u16 *dev_id)
{
u16 tmp = dev_id[0] & 0x3;
switch (tmp) {
@@ -260,7 +283,7 @@
}
}
-static inline int is_atapi_taskfile(struct ata_taskfile *tf)
+static inline int is_atapi_taskfile(const struct ata_taskfile *tf)
{
return (tf->protocol == ATA_PROT_ATAPI) ||
(tf->protocol == ATA_PROT_ATAPI_NODATA) ||
diff --git a/include/linux/audit.h b/include/linux/audit.h
index b2a2509..da3c019 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -260,11 +260,11 @@
#ifdef CONFIG_AUDIT
/* These are defined in audit.c */
/* Public API */
-extern void audit_log(struct audit_context *ctx, int gfp_mask,
+extern void audit_log(struct audit_context *ctx, gfp_t gfp_mask,
int type, const char *fmt, ...)
__attribute__((format(printf,4,5)));
-extern struct audit_buffer *audit_log_start(struct audit_context *ctx, int gfp_mask, int type);
+extern struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int type);
extern void audit_log_format(struct audit_buffer *ab,
const char *fmt, ...)
__attribute__((format(printf,2,3)));
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 3344b4e8..685fd37 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -301,7 +301,7 @@
struct sg_iovec *, int, int);
extern void bio_unmap_user(struct bio *);
extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int,
- unsigned int);
+ gfp_t);
extern void bio_set_pages_dirty(struct bio *bio);
extern void bio_check_pages_dirty(struct bio *bio);
extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int);
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 86dd550..7d8ff97 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -40,6 +40,8 @@
* bitmap_weight(src, nbits) Hamming Weight: number set bits
* bitmap_shift_right(dst, src, n, nbits) *dst = *src >> n
* bitmap_shift_left(dst, src, n, nbits) *dst = *src << n
+ * bitmap_remap(dst, src, old, new, nbits) *dst = map(old, new)(src)
+ * bitmap_bitremap(oldbit, old, new, nbits) newbit = map(old, new)(oldbit)
* bitmap_scnprintf(buf, len, src, nbits) Print bitmap src to buf
* bitmap_parse(ubuf, ulen, dst, nbits) Parse bitmap dst from user buf
* bitmap_scnlistprintf(buf, len, src, nbits) Print bitmap src as list to buf
@@ -104,6 +106,10 @@
const unsigned long *src, int nbits);
extern int bitmap_parselist(const char *buf, unsigned long *maskp,
int nmaskbits);
+extern void bitmap_remap(unsigned long *dst, const unsigned long *src,
+ const unsigned long *old, const unsigned long *new, int bits);
+extern int bitmap_bitremap(int oldbit,
+ const unsigned long *old, const unsigned long *new, int bits);
extern int bitmap_find_free_region(unsigned long *bitmap, int bits, int order);
extern void bitmap_release_region(unsigned long *bitmap, int pos, int order);
extern int bitmap_allocate_region(unsigned long *bitmap, int pos, int order);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index efdc9b5..025a7f0 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -96,8 +96,8 @@
void put_io_context(struct io_context *ioc);
void exit_io_context(void);
-struct io_context *current_io_context(int gfp_flags);
-struct io_context *get_io_context(int gfp_flags);
+struct io_context *current_io_context(gfp_t gfp_flags);
+struct io_context *get_io_context(gfp_t gfp_flags);
void copy_io_context(struct io_context **pdst, struct io_context **psrc);
void swap_io_context(struct io_context **ioc1, struct io_context **ioc2);
@@ -107,9 +107,9 @@
struct request_list {
int count[2];
int starved[2];
+ int elvpriv;
mempool_t *rq_pool;
wait_queue_head_t wait[2];
- wait_queue_head_t drain;
};
#define BLK_MAX_CDB 16
@@ -203,6 +203,7 @@
enum rq_flag_bits {
__REQ_RW, /* not set, read. set, write */
__REQ_FAILFAST, /* no low level driver retries */
+ __REQ_SORTED, /* elevator knows about this request */
__REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
__REQ_HARDBARRIER, /* may not be passed by drive either */
__REQ_CMD, /* is a regular fs rw request */
@@ -210,6 +211,7 @@
__REQ_STARTED, /* drive already may have started this one */
__REQ_DONTPREP, /* don't call prep for this one */
__REQ_QUEUED, /* uses queueing */
+ __REQ_ELVPRIV, /* elevator private data attached */
/*
* for ATA/ATAPI devices
*/
@@ -235,6 +237,7 @@
#define REQ_RW (1 << __REQ_RW)
#define REQ_FAILFAST (1 << __REQ_FAILFAST)
+#define REQ_SORTED (1 << __REQ_SORTED)
#define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER)
#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
#define REQ_CMD (1 << __REQ_CMD)
@@ -242,6 +245,7 @@
#define REQ_STARTED (1 << __REQ_STARTED)
#define REQ_DONTPREP (1 << __REQ_DONTPREP)
#define REQ_QUEUED (1 << __REQ_QUEUED)
+#define REQ_ELVPRIV (1 << __REQ_ELVPRIV)
#define REQ_PC (1 << __REQ_PC)
#define REQ_BLOCK_PC (1 << __REQ_BLOCK_PC)
#define REQ_SENSE (1 << __REQ_SENSE)
@@ -333,6 +337,12 @@
end_flush_fn *end_flush_fn;
/*
+ * Dispatch queue sorting
+ */
+ sector_t end_sector;
+ struct request *boundary_rq;
+
+ /*
* Auto-unplugging state
*/
struct timer_list unplug_timer;
@@ -354,7 +364,7 @@
* queue needs bounce pages for pages above this limit
*/
unsigned long bounce_pfn;
- unsigned int bounce_gfp;
+ gfp_t bounce_gfp;
/*
* various queue flags, see QUEUE_* below
@@ -405,8 +415,6 @@
unsigned int sg_reserved_size;
int node;
- struct list_head drain_list;
-
/*
* reserved for flush operations
*/
@@ -434,7 +442,7 @@
#define QUEUE_FLAG_DEAD 5 /* queue being torn down */
#define QUEUE_FLAG_REENTER 6 /* Re-entrancy avoidance */
#define QUEUE_FLAG_PLUGGED 7 /* queue is plugged */
-#define QUEUE_FLAG_DRAIN 8 /* draining queue for sched switch */
+#define QUEUE_FLAG_ELVSWITCH 8 /* don't use elevator, just do FIFO */
#define QUEUE_FLAG_FLUSH 9 /* doing barrier flush sequence */
#define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
@@ -454,6 +462,7 @@
#define blk_pm_request(rq) \
((rq)->flags & (REQ_PM_SUSPEND | REQ_PM_RESUME))
+#define blk_sorted_rq(rq) ((rq)->flags & REQ_SORTED)
#define blk_barrier_rq(rq) ((rq)->flags & REQ_HARDBARRIER)
#define blk_barrier_preflush(rq) ((rq)->flags & REQ_BAR_PREFLUSH)
#define blk_barrier_postflush(rq) ((rq)->flags & REQ_BAR_POSTFLUSH)
@@ -550,7 +559,7 @@
extern void blk_put_request(struct request *);
extern void blk_end_sync_rq(struct request *rq);
extern void blk_attempt_remerge(request_queue_t *, struct request *);
-extern struct request *blk_get_request(request_queue_t *, int, int);
+extern struct request *blk_get_request(request_queue_t *, int, gfp_t);
extern void blk_insert_request(request_queue_t *, struct request *, int, void *);
extern void blk_requeue_request(request_queue_t *, struct request *);
extern void blk_plug_device(request_queue_t *);
@@ -565,7 +574,7 @@
extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *);
extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned int);
extern int blk_rq_unmap_user(struct bio *, unsigned int);
-extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, unsigned int);
+extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t);
extern int blk_rq_map_user_iov(request_queue_t *, struct request *, struct sg_iovec *, int);
extern int blk_execute_rq(request_queue_t *, struct gendisk *,
struct request *, int);
@@ -611,12 +620,21 @@
static inline void blkdev_dequeue_request(struct request *req)
{
- BUG_ON(list_empty(&req->queuelist));
+ elv_dequeue_request(req->q, req);
+}
- list_del_init(&req->queuelist);
+/*
+ * This should be in elevator.h, but that requires pulling in rq and q
+ */
+static inline void elv_dispatch_add_tail(struct request_queue *q,
+ struct request *rq)
+{
+ if (q->last_merge == rq)
+ q->last_merge = NULL;
- if (req->rl)
- elv_remove_request(req->q, req);
+ q->end_sector = rq_end_sector(rq);
+ q->boundary_rq = rq;
+ list_add_tail(&rq->queuelist, &q->queue_head);
}
/*
@@ -650,12 +668,10 @@
extern void generic_unplug_device(request_queue_t *);
extern void __generic_unplug_device(request_queue_t *);
extern long nr_blockdev_pages(void);
-extern void blk_wait_queue_drained(request_queue_t *, int);
-extern void blk_finish_queue_drain(request_queue_t *);
int blk_get_queue(request_queue_t *);
-request_queue_t *blk_alloc_queue(int gfp_mask);
-request_queue_t *blk_alloc_queue_node(int,int);
+request_queue_t *blk_alloc_queue(gfp_t);
+request_queue_t *blk_alloc_queue_node(gfp_t, int);
#define blk_put_queue(q) blk_cleanup_queue((q))
/*
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 6a1d154..1db061b 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -126,8 +126,8 @@
/* If we *know* page->private refers to buffer_heads */
#define page_buffers(page) \
({ \
- BUG_ON(!PagePrivate(page)); \
- ((struct buffer_head *)(page)->private); \
+ BUG_ON(!PagePrivate(page)); \
+ ((struct buffer_head *)page_private(page)); \
})
#define page_has_buffers(page) PagePrivate(page)
@@ -188,8 +188,9 @@
* Generic address_space_operations implementations for buffer_head-backed
* address_spaces.
*/
-int try_to_release_page(struct page * page, int gfp_mask);
+int try_to_release_page(struct page * page, gfp_t gfp_mask);
int block_invalidatepage(struct page *page, unsigned long offset);
+int do_invalidatepage(struct page *page, unsigned long offset);
int block_write_full_page(struct page *page, get_block_t *get_block,
struct writeback_control *wbc);
int block_read_full_page(struct page*, get_block_t*);
@@ -219,7 +220,7 @@
{
page_cache_get(page);
SetPagePrivate(page);
- page->private = (unsigned long)head;
+ set_page_private(page, (unsigned long)head);
}
static inline void get_bh(struct buffer_head *bh)
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 86980c6..1f7b2c0 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -32,6 +32,7 @@
};
extern int register_cpu(struct cpu *, int, struct node *);
+extern struct sys_device *get_cpu_sysdev(int cpu);
#ifdef CONFIG_HOTPLUG_CPU
extern void unregister_cpu(struct cpu *, struct node *);
#endif
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index ff7f80f..d068176 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -23,6 +23,7 @@
#include <linux/completion.h>
#include <linux/workqueue.h>
#include <linux/cpumask.h>
+#include <asm/div64.h>
#define CPUFREQ_NAME_LEN 16
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 9bdba81..13e9f4a 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -12,6 +12,8 @@
* see bitmap_scnprintf() and bitmap_parse() in lib/bitmap.c.
* For details of cpulist_scnprintf() and cpulist_parse(), see
* bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c.
+ * For details of cpu_remap(), see bitmap_bitremap in lib/bitmap.c
+ * For details of cpus_remap(), see bitmap_remap in lib/bitmap.c.
*
* The available cpumask operations are:
*
@@ -50,6 +52,8 @@
* int cpumask_parse(ubuf, ulen, mask) Parse ascii string as cpumask
* int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing
* int cpulist_parse(buf, map) Parse ascii string as cpulist
+ * int cpu_remap(oldbit, old, new) newbit = map(old, new)(oldbit)
+ * int cpus_remap(dst, src, old, new) *dst = map(old, new)(src)
*
* for_each_cpu_mask(cpu, mask) for-loop cpu over mask
*
@@ -294,6 +298,22 @@
return bitmap_parselist(buf, dstp->bits, nbits);
}
+#define cpu_remap(oldbit, old, new) \
+ __cpu_remap((oldbit), &(old), &(new), NR_CPUS)
+static inline int __cpu_remap(int oldbit,
+ const cpumask_t *oldp, const cpumask_t *newp, int nbits)
+{
+ return bitmap_bitremap(oldbit, oldp->bits, newp->bits, nbits);
+}
+
+#define cpus_remap(dst, src, old, new) \
+ __cpus_remap(&(dst), &(src), &(old), &(new), NR_CPUS)
+static inline void __cpus_remap(cpumask_t *dstp, const cpumask_t *srcp,
+ const cpumask_t *oldp, const cpumask_t *newp, int nbits)
+{
+ bitmap_remap(dstp->bits, srcp->bits, oldp->bits, newp->bits, nbits);
+}
+
#if NR_CPUS > 1
#define for_each_cpu_mask(cpu, mask) \
for ((cpu) = first_cpu(mask); \
diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h
index 04fa7df..300d704 100644
--- a/include/linux/cyclomx.h
+++ b/include/linux/cyclomx.h
@@ -37,8 +37,6 @@
#include <linux/cycx_x25.h>
#endif
-#define is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0)
-
/* Adapter Data Space.
* This structure is needed because we handle multiple cards, otherwise
* static data would do it.
diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h
index 6621df8..12fe6b0 100644
--- a/include/linux/cycx_drv.h
+++ b/include/linux/cycx_drv.h
@@ -60,6 +60,5 @@
extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
extern int cycx_exec(void __iomem *addr);
-extern void cycx_inten(struct cycx_hw *hw);
extern void cycx_intr(struct cycx_hw *hw);
#endif /* _CYCX_DRV_H */
diff --git a/include/linux/device.h b/include/linux/device.h
index 95d607a..a9e72ac 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -28,19 +28,6 @@
#define BUS_ID_SIZE KOBJ_NAME_LEN
-enum {
- SUSPEND_NOTIFY,
- SUSPEND_SAVE_STATE,
- SUSPEND_DISABLE,
- SUSPEND_POWER_DOWN,
-};
-
-enum {
- RESUME_POWER_ON,
- RESUME_RESTORE_STATE,
- RESUME_ENABLE,
-};
-
struct device;
struct device_driver;
struct class;
@@ -115,8 +102,8 @@
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
void (*shutdown) (struct device * dev);
- int (*suspend) (struct device * dev, pm_message_t state, u32 level);
- int (*resume) (struct device * dev, u32 level);
+ int (*suspend) (struct device * dev, pm_message_t state);
+ int (*resume) (struct device * dev);
};
@@ -190,7 +177,43 @@
extern int class_create_file(struct class *, const struct class_attribute *);
extern void class_remove_file(struct class *, const struct class_attribute *);
+struct class_device_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct class_device *, char * buf);
+ ssize_t (*store)(struct class_device *, const char * buf, size_t count);
+};
+#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \
+struct class_device_attribute class_device_attr_##_name = \
+ __ATTR(_name,_mode,_show,_store)
+
+extern int class_device_create_file(struct class_device *,
+ const struct class_device_attribute *);
+
+/**
+ * struct class_device - class devices
+ * @class: pointer to the parent class for this class device. This is required.
+ * @devt: for internal use by the driver core only.
+ * @node: for internal use by the driver core only.
+ * @kobj: for internal use by the driver core only.
+ * @devt_attr: for internal use by the driver core only.
+ * @dev: if set, a symlink to the struct device is created in the sysfs
+ * directory for this struct class device.
+ * @class_data: pointer to whatever you want to store here for this struct
+ * class_device. Use class_get_devdata() and class_set_devdata() to get and
+ * set this pointer.
+ * @parent: pointer to a struct class_device that is the parent of this struct
+ * class_device. If NULL, this class_device will show up at the root of the
+ * struct class in sysfs (which is probably what you want to have happen.)
+ * @release: pointer to a release function for this struct class_device. If
+ * set, this will be called instead of the class specific release function.
+ * Only use this if you want to override the default release function, like
+ * when you are nesting class_device structures.
+ * @hotplug: pointer to a hotplug function for this struct class_device. If
+ * set, this will be called instead of the class specific hotplug function.
+ * Only use this if you want to override the default hotplug function, like
+ * when you are nesting class_device structures.
+ */
struct class_device {
struct list_head node;
@@ -198,9 +221,14 @@
struct class * class; /* required */
dev_t devt; /* dev_t, creates the sysfs "dev" */
struct class_device_attribute *devt_attr;
+ struct class_device_attribute uevent_attr;
struct device * dev; /* not necessary, but nice to have */
void * class_data; /* class-specific data */
+ struct class_device *parent; /* parent of this child device, if there is one */
+ void (*release)(struct class_device *dev);
+ int (*hotplug)(struct class_device *dev, char **envp,
+ int num_envp, char *buffer, int buffer_size);
char class_id[BUS_ID_SIZE]; /* unique to this class */
};
@@ -228,18 +256,6 @@
extern struct class_device * class_device_get(struct class_device *);
extern void class_device_put(struct class_device *);
-struct class_device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct class_device *, char * buf);
- ssize_t (*store)(struct class_device *, const char * buf, size_t count);
-};
-
-#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \
-struct class_device_attribute class_device_attr_##_name = \
- __ATTR(_name,_mode,_show,_store)
-
-extern int class_device_create_file(struct class_device *,
- const struct class_device_attribute *);
extern void class_device_remove_file(struct class_device *,
const struct class_device_attribute *);
extern int class_device_create_bin_file(struct class_device *,
@@ -251,8 +267,8 @@
struct list_head node;
struct class *class;
- int (*add) (struct class_device *);
- void (*remove) (struct class_device *);
+ int (*add) (struct class_device *, struct class_interface *);
+ void (*remove) (struct class_device *, struct class_interface *);
};
extern int class_interface_register(struct class_interface *);
@@ -260,12 +276,29 @@
extern struct class *class_create(struct module *owner, char *name);
extern void class_destroy(struct class *cls);
-extern struct class_device *class_device_create(struct class *cls, dev_t devt,
- struct device *device, char *fmt, ...)
- __attribute__((format(printf,4,5)));
+extern struct class_device *class_device_create(struct class *cls,
+ struct class_device *parent,
+ dev_t devt,
+ struct device *device,
+ char *fmt, ...)
+ __attribute__((format(printf,5,6)));
extern void class_device_destroy(struct class *cls, dev_t devt);
+/* interface for exporting device attributes */
+struct device_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
+};
+
+#define DEVICE_ATTR(_name,_mode,_show,_store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+extern int device_create_file(struct device *device, struct device_attribute * entry);
+extern void device_remove_file(struct device * dev, struct device_attribute * attr);
struct device {
struct klist klist_children;
struct klist_node knode_parent; /* node in sibling list */
@@ -275,6 +308,7 @@
struct kobject kobj;
char bus_id[BUS_ID_SIZE]; /* position on parent bus */
+ struct device_attribute uevent_attr;
struct semaphore sem; /* semaphore to synchronize calls to
* its driver.
@@ -343,23 +377,6 @@
extern void driver_attach(struct device_driver * drv);
-/* driverfs interface for exporting device attributes */
-
-struct device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct device *dev, struct device_attribute *attr,
- char *buf);
- ssize_t (*store)(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count);
-};
-
-#define DEVICE_ATTR(_name,_mode,_show,_store) \
-struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store)
-
-
-extern int device_create_file(struct device *device, struct device_attribute * entry);
-extern void device_remove_file(struct device * dev, struct device_attribute * attr);
-
/*
* Platform "fixup" functions - allow the platform to have their say
* about devices and actions that the general device layer doesn't
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index a415f1d..05f4132 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -60,7 +60,7 @@
void *device_data; /* Type specific data */
};
-#if defined(CONFIG_X86) && !defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_32)
extern int dmi_check_system(struct dmi_system_id *list);
extern char * dmi_get_system_info(int field);
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index ea6bbc2..a74c27e 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -8,18 +8,17 @@
typedef void (elevator_merged_fn) (request_queue_t *, struct request *);
-typedef struct request *(elevator_next_req_fn) (request_queue_t *);
+typedef int (elevator_dispatch_fn) (request_queue_t *, int);
-typedef void (elevator_add_req_fn) (request_queue_t *, struct request *, int);
+typedef void (elevator_add_req_fn) (request_queue_t *, struct request *);
typedef int (elevator_queue_empty_fn) (request_queue_t *);
-typedef void (elevator_remove_req_fn) (request_queue_t *, struct request *);
-typedef void (elevator_requeue_req_fn) (request_queue_t *, struct request *);
typedef struct request *(elevator_request_list_fn) (request_queue_t *, struct request *);
typedef void (elevator_completed_req_fn) (request_queue_t *, struct request *);
typedef int (elevator_may_queue_fn) (request_queue_t *, int, struct bio *);
-typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, int);
+typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, gfp_t);
typedef void (elevator_put_req_fn) (request_queue_t *, struct request *);
+typedef void (elevator_activate_req_fn) (request_queue_t *, struct request *);
typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *);
typedef int (elevator_init_fn) (request_queue_t *, elevator_t *);
@@ -31,10 +30,9 @@
elevator_merged_fn *elevator_merged_fn;
elevator_merge_req_fn *elevator_merge_req_fn;
- elevator_next_req_fn *elevator_next_req_fn;
+ elevator_dispatch_fn *elevator_dispatch_fn;
elevator_add_req_fn *elevator_add_req_fn;
- elevator_remove_req_fn *elevator_remove_req_fn;
- elevator_requeue_req_fn *elevator_requeue_req_fn;
+ elevator_activate_req_fn *elevator_activate_req_fn;
elevator_deactivate_req_fn *elevator_deactivate_req_fn;
elevator_queue_empty_fn *elevator_queue_empty_fn;
@@ -81,15 +79,15 @@
/*
* block elevator interface
*/
+extern void elv_dispatch_sort(request_queue_t *, struct request *);
extern void elv_add_request(request_queue_t *, struct request *, int, int);
extern void __elv_add_request(request_queue_t *, struct request *, int, int);
extern int elv_merge(request_queue_t *, struct request **, struct bio *);
extern void elv_merge_requests(request_queue_t *, struct request *,
struct request *);
extern void elv_merged_request(request_queue_t *, struct request *);
-extern void elv_remove_request(request_queue_t *, struct request *);
+extern void elv_dequeue_request(request_queue_t *, struct request *);
extern void elv_requeue_request(request_queue_t *, struct request *);
-extern void elv_deactivate_request(request_queue_t *, struct request *);
extern int elv_queue_empty(request_queue_t *);
extern struct request *elv_next_request(struct request_queue *q);
extern struct request *elv_former_request(request_queue_t *, struct request *);
@@ -98,7 +96,7 @@
extern void elv_unregister_queue(request_queue_t *q);
extern int elv_may_queue(request_queue_t *, int, struct bio *);
extern void elv_completed_request(request_queue_t *, struct request *);
-extern int elv_set_request(request_queue_t *, struct request *, struct bio *, int);
+extern int elv_set_request(request_queue_t *, struct request *, struct bio *, gfp_t);
extern void elv_put_request(request_queue_t *, struct request *);
/*
@@ -142,4 +140,6 @@
ELV_MQUEUE_MUST,
};
+#define rq_end_sector(rq) ((rq)->sector + (rq)->nr_sectors)
+
#endif
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 4522c71..cc84934 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -104,6 +104,22 @@
addr [0] &= 0xfe; /* clear multicast bit */
addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
}
+
+/**
+ * compare_ether_addr - Compare two Ethernet addresses
+ * @addr1: Pointer to a six-byte array containing the Ethernet address
+ * @addr2 Pointer other six-byte array containing the Ethernet address
+ *
+ * Compare two ethernet addresses, returns 0 if equal
+ */
+static inline unsigned compare_ether_addr(const u8 *_a, const u8 *_b)
+{
+ const u16 *a = (const u16 *) _a;
+ const u16 *b = (const u16 *) _b;
+
+ BUILD_BUG_ON(ETH_ALEN != 6);
+ return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
+}
#endif /* __KERNEL__ */
#endif /* _LINUX_ETHERDEVICE_H */
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index ed1440e..d2c390e 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -269,6 +269,8 @@
int ethtool_op_set_tso(struct net_device *dev, u32 data);
int ethtool_op_get_perm_addr(struct net_device *dev,
struct ethtool_perm_addr *addr, u8 *data);
+u32 ethtool_op_get_ufo(struct net_device *dev);
+int ethtool_op_set_ufo(struct net_device *dev, u32 data);
/**
* ðtool_ops - Alter and report network device settings
@@ -298,6 +300,8 @@
* set_sg: Turn scatter-gather on or off
* get_tso: Report whether TCP segmentation offload is enabled
* set_tso: Turn TCP segmentation offload on or off
+ * get_ufo: Report whether UDP fragmentation offload is enabled
+ * set_ufo: Turn UDP fragmentation offload on or off
* self_test: Run specified self-tests
* get_strings: Return a set of strings that describe the requested objects
* phys_id: Identify the device
@@ -364,6 +368,8 @@
int (*get_perm_addr)(struct net_device *, struct ethtool_perm_addr *, u8 *);
int (*begin)(struct net_device *);
void (*complete)(struct net_device *);
+ u32 (*get_ufo)(struct net_device *);
+ int (*set_ufo)(struct net_device *, u32);
};
/* CMDs currently supported */
@@ -400,6 +406,8 @@
#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e0b77c5..6d62267 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -320,7 +320,7 @@
/* Unfortunately this kludge is needed for FIBMAP. Don't use it */
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
- int (*releasepage) (struct page *, int);
+ int (*releasepage) (struct page *, gfp_t);
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
struct page* (*get_xip_page)(struct address_space *, sector_t,
@@ -574,7 +574,14 @@
#define RA_FLAG_INCACHE 0x02 /* file is already in cache */
struct file {
- struct list_head f_list;
+ /*
+ * fu_list becomes invalid after file_free is called and queued via
+ * fu_rcuhead for RCU freeing
+ */
+ union {
+ struct list_head fu_list;
+ struct rcu_head fu_rcuhead;
+ } f_u;
struct dentry *f_dentry;
struct vfsmount *f_vfsmnt;
struct file_operations *f_op;
@@ -598,7 +605,6 @@
spinlock_t f_ep_lock;
#endif /* #ifdef CONFIG_EPOLL */
struct address_space *f_mapping;
- struct rcu_head f_rcuhead;
};
extern spinlock_t files_lock;
#define file_list_lock() spin_lock(&files_lock);
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
new file mode 100644
index 0000000..bef23bb
--- /dev/null
+++ b/include/linux/fs_enet_pd.h
@@ -0,0 +1,136 @@
+/*
+ * Platform information definitions for the
+ * universal Freescale Ethernet driver.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_ENET_PD_H
+#define FS_ENET_PD_H
+
+#include <linux/version.h>
+#include <asm/types.h>
+
+#define FS_ENET_NAME "fs_enet"
+
+enum fs_id {
+ fsid_fec1,
+ fsid_fec2,
+ fsid_fcc1,
+ fsid_fcc2,
+ fsid_fcc3,
+ fsid_scc1,
+ fsid_scc2,
+ fsid_scc3,
+ fsid_scc4,
+};
+
+#define FS_MAX_INDEX 9
+
+static inline int fs_get_fec_index(enum fs_id id)
+{
+ if (id >= fsid_fec1 && id <= fsid_fec2)
+ return id - fsid_fec1;
+ return -1;
+}
+
+static inline int fs_get_fcc_index(enum fs_id id)
+{
+ if (id >= fsid_fcc1 && id <= fsid_fcc3)
+ return id - fsid_fcc1;
+ return -1;
+}
+
+static inline int fs_get_scc_index(enum fs_id id)
+{
+ if (id >= fsid_scc1 && id <= fsid_scc4)
+ return id - fsid_scc1;
+ return -1;
+}
+
+enum fs_mii_method {
+ fsmii_fixed,
+ fsmii_fec,
+ fsmii_bitbang,
+};
+
+enum fs_ioport {
+ fsiop_porta,
+ fsiop_portb,
+ fsiop_portc,
+ fsiop_portd,
+ fsiop_porte,
+};
+
+struct fs_mii_bus_info {
+ int method; /* mii method */
+ int id; /* the id of the mii_bus */
+ int disable_aneg; /* if the controller needs to negothiate speed & duplex */
+ int lpa; /* the default board-specific vallues will be applied otherwise */
+
+ union {
+ struct {
+ int duplex;
+ int speed;
+ } fixed;
+
+ struct {
+ /* nothing */
+ } fec;
+
+ struct {
+ /* nothing */
+ } scc;
+
+ struct {
+ int mdio_port; /* port & bit for MDIO */
+ int mdio_bit;
+ int mdc_port; /* port & bit for MDC */
+ int mdc_bit;
+ int delay; /* delay in us */
+ } bitbang;
+ } i;
+};
+
+struct fs_platform_info {
+
+ void(*init_ioports)(void);
+ /* device specific information */
+ int fs_no; /* controller index */
+
+ u32 cp_page; /* CPM page */
+ u32 cp_block; /* CPM sblock */
+
+ u32 clk_trx; /* some stuff for pins & mux configuration*/
+ u32 clk_route;
+ u32 clk_mask;
+
+ u32 mem_offset;
+ u32 dpram_offset;
+ u32 fcc_regs_c;
+
+ u32 device_flags;
+
+ int phy_addr; /* the phy address (-1 no phy) */
+ int phy_irq; /* the phy irq (if it exists) */
+
+ const struct fs_mii_bus_info *bus_info;
+
+ int rx_ring, tx_ring; /* number of buffers on rx */
+ __u8 macaddr[6]; /* mac address */
+ int rx_copybreak; /* limit we copy small frames */
+ int use_napi; /* use NAPI */
+ int napi_weight; /* NAPI weight */
+
+ int use_rmii; /* use RMII mode */
+};
+
+#endif
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index acbeb96..f98854c 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -61,7 +61,6 @@
#define FATTR_SIZE (1 << 3)
#define FATTR_ATIME (1 << 4)
#define FATTR_MTIME (1 << 5)
-#define FATTR_CTIME (1 << 6)
/**
* Flags returned by the OPEN request
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index cd623ec..2401dea 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -12,6 +12,7 @@
#include <asm/io.h>
#include <linux/list.h>
#include <linux/device.h>
+#include <linux/timer.h>
struct gameport {
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 01796c4..eabdb5c 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -119,7 +119,7 @@
int policy;
atomic_t sync_io; /* RAID */
- unsigned long stamp, stamp_idle;
+ unsigned long stamp;
int in_flight;
#ifdef CONFIG_SMP
struct disk_stats *dkstats;
@@ -132,6 +132,7 @@
struct disk_attribute {
struct attribute attr;
ssize_t (*show)(struct gendisk *, char *);
+ ssize_t (*store)(struct gendisk *, const char *, size_t);
};
/*
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 3010e17..c377943 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -12,8 +12,8 @@
* GFP bitmasks..
*/
/* Zone modifiers in GFP_ZONEMASK (see linux/mmzone.h - low two bits) */
-#define __GFP_DMA 0x01u
-#define __GFP_HIGHMEM 0x02u
+#define __GFP_DMA ((__force gfp_t)0x01u)
+#define __GFP_HIGHMEM ((__force gfp_t)0x02u)
/*
* Action modifiers - doesn't change the zoning
@@ -26,24 +26,24 @@
*
* __GFP_NORETRY: The VM implementation must not retry indefinitely.
*/
-#define __GFP_WAIT 0x10u /* Can wait and reschedule? */
-#define __GFP_HIGH 0x20u /* Should access emergency pools? */
-#define __GFP_IO 0x40u /* Can start physical IO? */
-#define __GFP_FS 0x80u /* Can call down to low-level FS? */
-#define __GFP_COLD 0x100u /* Cache-cold page required */
-#define __GFP_NOWARN 0x200u /* Suppress page allocation failure warning */
-#define __GFP_REPEAT 0x400u /* Retry the allocation. Might fail */
-#define __GFP_NOFAIL 0x800u /* Retry for ever. Cannot fail */
-#define __GFP_NORETRY 0x1000u /* Do not retry. Might fail */
-#define __GFP_NO_GROW 0x2000u /* Slab internal usage */
-#define __GFP_COMP 0x4000u /* Add compound page metadata */
-#define __GFP_ZERO 0x8000u /* Return zeroed page on success */
-#define __GFP_NOMEMALLOC 0x10000u /* Don't use emergency reserves */
-#define __GFP_NORECLAIM 0x20000u /* No realy zone reclaim during allocation */
-#define __GFP_HARDWALL 0x40000u /* Enforce hardwall cpuset memory allocs */
+#define __GFP_WAIT ((__force gfp_t)0x10u) /* Can wait and reschedule? */
+#define __GFP_HIGH ((__force gfp_t)0x20u) /* Should access emergency pools? */
+#define __GFP_IO ((__force gfp_t)0x40u) /* Can start physical IO? */
+#define __GFP_FS ((__force gfp_t)0x80u) /* Can call down to low-level FS? */
+#define __GFP_COLD ((__force gfp_t)0x100u) /* Cache-cold page required */
+#define __GFP_NOWARN ((__force gfp_t)0x200u) /* Suppress page allocation failure warning */
+#define __GFP_REPEAT ((__force gfp_t)0x400u) /* Retry the allocation. Might fail */
+#define __GFP_NOFAIL ((__force gfp_t)0x800u) /* Retry for ever. Cannot fail */
+#define __GFP_NORETRY ((__force gfp_t)0x1000u)/* Do not retry. Might fail */
+#define __GFP_NO_GROW ((__force gfp_t)0x2000u)/* Slab internal usage */
+#define __GFP_COMP ((__force gfp_t)0x4000u)/* Add compound page metadata */
+#define __GFP_ZERO ((__force gfp_t)0x8000u)/* Return zeroed page on success */
+#define __GFP_NOMEMALLOC ((__force gfp_t)0x10000u) /* Don't use emergency reserves */
+#define __GFP_NORECLAIM ((__force gfp_t)0x20000u) /* No realy zone reclaim during allocation */
+#define __GFP_HARDWALL ((__force gfp_t)0x40000u) /* Enforce hardwall cpuset memory allocs */
#define __GFP_BITS_SHIFT 20 /* Room for 20 __GFP_FOO bits */
-#define __GFP_BITS_MASK ((1 << __GFP_BITS_SHIFT) - 1)
+#define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1))
/* if you forget to add the bitmask here kernel will crash, period */
#define GFP_LEVEL_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS| \
@@ -64,6 +64,7 @@
#define GFP_DMA __GFP_DMA
+#define gfp_zone(mask) ((__force int)((mask) & (__force gfp_t)GFP_ZONEMASK))
/*
* There is only one page-allocator function, and two main namespaces to
@@ -94,7 +95,7 @@
return NULL;
return __alloc_pages(gfp_mask, order,
- NODE_DATA(nid)->node_zonelists + (gfp_mask & GFP_ZONEMASK));
+ NODE_DATA(nid)->node_zonelists + gfp_zone(gfp_mask));
}
#ifdef CONFIG_NUMA
diff --git a/include/linux/hil.h b/include/linux/hil.h
new file mode 100644
index 0000000..13352d7
--- /dev/null
+++ b/include/linux/hil.h
@@ -0,0 +1,483 @@
+#ifndef _HIL_H_
+#define _HIL_H_
+
+/*
+ * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A
+ *
+ * A note of thanks to HP for providing and shipping reference materials
+ * free of charge to help in the development of HIL support for Linux.
+ *
+ */
+
+#include <asm/types.h>
+
+/* Physical constants relevant to raw loop/device timing.
+ */
+
+#define HIL_CLOCK 8MHZ
+#define HIL_EK1_CLOCK 30HZ
+#define HIL_EK2_CLOCK 60HZ
+
+#define HIL_TIMEOUT_DEV 5 /* ms */
+#define HIL_TIMEOUT_DEVS 10 /* ms */
+#define HIL_TIMEOUT_NORESP 10 /* ms */
+#define HIL_TIMEOUT_DEVS_DATA 16 /* ms */
+#define HIL_TIMEOUT_SELFTEST 200 /* ms */
+
+
+/* Actual wire line coding. These will only be useful if someone is
+ * implementing a software MLC to run HIL devices on a non-parisc machine.
+ */
+
+#define HIL_WIRE_PACKET_LEN 15
+enum hil_wire_bitpos {
+ HIL_WIRE_START = 0,
+ HIL_WIRE_ADDR2,
+ HIL_WIRE_ADDR1,
+ HIL_WIRE_ADDR0,
+ HIL_WIRE_COMMAND,
+ HIL_WIRE_DATA7,
+ HIL_WIRE_DATA6,
+ HIL_WIRE_DATA5,
+ HIL_WIRE_DATA4,
+ HIL_WIRE_DATA3,
+ HIL_WIRE_DATA2,
+ HIL_WIRE_DATA1,
+ HIL_WIRE_DATA0,
+ HIL_WIRE_PARITY,
+ HIL_WIRE_STOP
+};
+
+/* HP documentation uses these bit positions to refer to commands;
+ * we will call these "packets".
+ */
+enum hil_pkt_bitpos {
+ HIL_PKT_CMD = 0x00000800,
+ HIL_PKT_ADDR2 = 0x00000400,
+ HIL_PKT_ADDR1 = 0x00000200,
+ HIL_PKT_ADDR0 = 0x00000100,
+ HIL_PKT_ADDR_MASK = 0x00000700,
+ HIL_PKT_ADDR_SHIFT = 8,
+ HIL_PKT_DATA7 = 0x00000080,
+ HIL_PKT_DATA6 = 0x00000040,
+ HIL_PKT_DATA5 = 0x00000020,
+ HIL_PKT_DATA4 = 0x00000010,
+ HIL_PKT_DATA3 = 0x00000008,
+ HIL_PKT_DATA2 = 0x00000004,
+ HIL_PKT_DATA1 = 0x00000002,
+ HIL_PKT_DATA0 = 0x00000001,
+ HIL_PKT_DATA_MASK = 0x000000FF,
+ HIL_PKT_DATA_SHIFT = 0
+};
+
+/* The HIL MLC also has several error/status/control bits. We extend the
+ * "packet" to include these when direct access to the MLC is available,
+ * or emulate them in cases where they are not available.
+ *
+ * This way the device driver knows that the underlying MLC driver
+ * has had to deal with loop errors.
+ */
+enum hil_error_bitpos {
+ HIL_ERR_OB = 0x00000800, /* MLC is busy sending an auto-poll,
+ or we have filled up the output
+ buffer and must wait. */
+ HIL_ERR_INT = 0x00010000, /* A normal interrupt has occurred. */
+ HIL_ERR_NMI = 0x00020000, /* An NMI has occurred. */
+ HIL_ERR_LERR = 0x00040000, /* A poll didn't come back. */
+ HIL_ERR_PERR = 0x01000000, /* There was a Parity Error. */
+ HIL_ERR_FERR = 0x02000000, /* There was a Framing Error. */
+ HIL_ERR_FOF = 0x04000000 /* Input FIFO Overflowed. */
+};
+
+enum hil_control_bitpos {
+ HIL_CTRL_TEST = 0x00010000,
+ HIL_CTRL_IPF = 0x00040000,
+ HIL_CTRL_APE = 0x02000000
+};
+
+/* Bits 30,31 are unused, we use them to control write behavior. */
+#define HIL_DO_ALTER_CTRL 0x40000000 /* Write MSW of packet to control
+ before writing LSW to loop */
+#define HIL_CTRL_ONLY 0xc0000000 /* *Only* alter the control registers */
+
+/* This gives us a 32-bit "packet"
+ */
+typedef u32 hil_packet;
+
+
+/* HIL Loop commands
+ */
+enum hil_command {
+ HIL_CMD_IFC = 0x00, /* Interface Clear */
+ HIL_CMD_EPT = 0x01, /* Enter Pass-Thru Mode */
+ HIL_CMD_ELB = 0x02, /* Enter Loop-Back Mode */
+ HIL_CMD_IDD = 0x03, /* Identify and Describe */
+ HIL_CMD_DSR = 0x04, /* Device Soft Reset */
+ HIL_CMD_PST = 0x05, /* Perform Self Test */
+ HIL_CMD_RRG = 0x06, /* Read Register */
+ HIL_CMD_WRG = 0x07, /* Write Register */
+ HIL_CMD_ACF = 0x08, /* Auto Configure */
+ HIL_CMDID_ACF = 0x07, /* Auto Configure bits with incremented ID */
+ HIL_CMD_POL = 0x10, /* Poll */
+ HIL_CMDCT_POL = 0x0f, /* Poll command bits with item count */
+ HIL_CMD_RPL = 0x20, /* RePoll */
+ HIL_CMDCT_RPL = 0x0f, /* RePoll command bits with item count */
+ HIL_CMD_RNM = 0x30, /* Report Name */
+ HIL_CMD_RST = 0x31, /* Report Status */
+ HIL_CMD_EXD = 0x32, /* Extended Describe */
+ HIL_CMD_RSC = 0x33, /* Report Security Code */
+
+ /* 0x34 to 0x3c reserved for future use */
+
+ HIL_CMD_DKA = 0x3d, /* Disable Keyswitch Autorepeat */
+ HIL_CMD_EK1 = 0x3e, /* Enable Keyswitch Autorepeat 1 */
+ HIL_CMD_EK2 = 0x3f, /* Enable Keyswitch Autorepeat 2 */
+ HIL_CMD_PR1 = 0x40, /* Prompt1 */
+ HIL_CMD_PR2 = 0x41, /* Prompt2 */
+ HIL_CMD_PR3 = 0x42, /* Prompt3 */
+ HIL_CMD_PR4 = 0x43, /* Prompt4 */
+ HIL_CMD_PR5 = 0x44, /* Prompt5 */
+ HIL_CMD_PR6 = 0x45, /* Prompt6 */
+ HIL_CMD_PR7 = 0x46, /* Prompt7 */
+ HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */
+ HIL_CMD_AK1 = 0x48, /* Acknowlege1 */
+ HIL_CMD_AK2 = 0x49, /* Acknowlege2 */
+ HIL_CMD_AK3 = 0x4a, /* Acknowlege3 */
+ HIL_CMD_AK4 = 0x4b, /* Acknowlege4 */
+ HIL_CMD_AK5 = 0x4c, /* Acknowlege5 */
+ HIL_CMD_AK6 = 0x4d, /* Acknowlege6 */
+ HIL_CMD_AK7 = 0x4e, /* Acknowlege7 */
+ HIL_CMD_ACK = 0x4f, /* Acknowlege (General Purpose) */
+
+ /* 0x50 to 0x78 reserved for future use */
+ /* 0x80 to 0xEF device-specific commands */
+ /* 0xf0 to 0xf9 reserved for future use */
+
+ HIL_CMD_RIO = 0xfa, /* Register I/O Error */
+ HIL_CMD_SHR = 0xfb, /* System Hard Reset */
+ HIL_CMD_TER = 0xfc, /* Transmission Error */
+ HIL_CMD_CAE = 0xfd, /* Configuration Address Error */
+ HIL_CMD_DHR = 0xfe, /* Device Hard Reset */
+
+ /* 0xff is prohibited from use. */
+};
+
+
+/*
+ * Response "records" to HIL commands
+ */
+
+/* Device ID byte
+ */
+#define HIL_IDD_DID_TYPE_MASK 0xe0 /* Primary type bits */
+#define HIL_IDD_DID_TYPE_KB_INTEGRAL 0xa0 /* Integral keyboard */
+#define HIL_IDD_DID_TYPE_KB_ITF 0xc0 /* ITD keyboard */
+#define HIL_IDD_DID_TYPE_KB_RSVD 0xe0 /* Reserved keyboard type */
+#define HIL_IDD_DID_TYPE_KB_LANG_MASK 0x1f /* Keyboard locale bits */
+#define HIL_IDD_DID_KBLANG_USE_ESD 0x00 /* Use ESD Locale instead */
+#define HIL_IDD_DID_TYPE_ABS 0x80 /* Absolute Positioners */
+#define HIL_IDD_DID_ABS_RSVD1_MASK 0xf8 /* Reserved */
+#define HIL_IDD_DID_ABS_RSVD1 0x98
+#define HIL_IDD_DID_ABS_TABLET_MASK 0xf8 /* Tablets and digitizers */
+#define HIL_IDD_DID_ABS_TABLET 0x90
+#define HIL_IDD_DID_ABS_TSCREEN_MASK 0xfc /* Touch screens */
+#define HIL_IDD_DID_ABS_TSCREEN 0x8c
+#define HIL_IDD_DID_ABS_RSVD2_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_ABS_RSVD2 0x88
+#define HIL_IDD_DID_ABS_RSVD3_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_ABS_RSVD3 0x80
+#define HIL_IDD_DID_TYPE_REL 0x60 /* Relative Positioners */
+#define HIL_IDD_DID_REL_RSVD1_MASK 0xf0 /* Reserved */
+#define HIL_IDD_DID_REL_RSVD1 0x70
+#define HIL_IDD_DID_REL_RSVD2_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_REL_RSVD2 0x6c
+#define HIL_IDD_DID_REL_MOUSE_MASK 0xfc /* Mouse */
+#define HIL_IDD_DID_REL_MOUSE 0x68
+#define HIL_IDD_DID_REL_QUAD_MASK 0xf8 /* Other Quadrature Devices */
+#define HIL_IDD_DID_REL_QUAD 0x60
+#define HIL_IDD_DID_TYPE_CHAR 0x40 /* Character Entry */
+#define HIL_IDD_DID_CHAR_BARCODE_MASK 0xfc /* Barcode Reader */
+#define HIL_IDD_DID_CHAR_BARCODE 0x5c
+#define HIL_IDD_DID_CHAR_RSVD1_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD1 0x58
+#define HIL_IDD_DID_CHAR_RSVD2_MASK 0xf8 /* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD2 0x50
+#define HIL_IDD_DID_CHAR_RSVD3_MASK 0xf0 /* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD3 0x40
+#define HIL_IDD_DID_TYPE_OTHER 0x20 /* Miscellaneous */
+#define HIL_IDD_DID_OTHER_RSVD1_MASK 0xf0 /* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD1 0x30
+#define HIL_IDD_DID_OTHER_BARCODE_MASK 0xfc /* Tone Generator */
+#define HIL_IDD_DID_OTHER_BARCODE 0x2c
+#define HIL_IDD_DID_OTHER_RSVD2_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD2 0x28
+#define HIL_IDD_DID_OTHER_RSVD3_MASK 0xf8 /* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD3 0x20
+#define HIL_IDD_DID_TYPE_KEYPAD 0x00 /* Vectra Keyboard */
+
+/* IDD record header
+ */
+#define HIL_IDD_HEADER_AXSET_MASK 0x03 /* Number of axis in a set */
+#define HIL_IDD_HEADER_RSC 0x04 /* Supports RSC command */
+#define HIL_IDD_HEADER_EXD 0x08 /* Supports EXD command */
+#define HIL_IDD_HEADER_IOD 0x10 /* IOD byte to follow */
+#define HIL_IDD_HEADER_16BIT 0x20 /* 16 (vs. 8) bit resolution */
+#define HIL_IDD_HEADER_ABS 0x40 /* Reports Absolute Position */
+#define HIL_IDD_HEADER_2X_AXIS 0x80 /* Two sets of 1-3 axis */
+
+/* I/O Descriptor
+ */
+#define HIL_IDD_IOD_NBUTTON_MASK 0x07 /* Number of buttons */
+#define HIL_IDD_IOD_PROXIMITY 0x08 /* Proximity in/out events */
+#define HIL_IDD_IOD_PROMPT_MASK 0x70 /* Number of prompts/acks */
+#define HIL_IDD_IOD_PROMPT_SHIFT 4
+#define HIL_IDD_IOD_PROMPT 0x80 /* Generic prompt/ack */
+
+#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \
+((header_packet) & HIL_IDD_HEADER_AXSET_MASK)
+
+#define HIL_IDD_NUM_AXSETS(header_packet) \
+(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS))
+
+#define HIL_IDD_LEN(header_packet) \
+((4 - !(header_packet & HIL_IDD_HEADER_IOD) - \
+ 2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) + \
+ 2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) * \
+ !!((header_packet) & HIL_IDD_HEADER_ABS))
+
+/* The following HIL_IDD_* macros assume you have an array of
+ * packets and/or unpacked 8-bit data in the order that they
+ * were received.
+ */
+
+#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \
+(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 : \
+(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) + \
+ ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8) \
+* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1)))
+
+#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \
+((!(*(header_ptr) & HIL_IDD_HEADER_ABS) || \
+ (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 : \
+ ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) + \
+ ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8)))
+
+#define HIL_IDD_IOD(header_ptr) \
+(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1))
+
+#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) && \
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT))
+
+#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) && \
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY))
+
+#define HIL_IDD_NUM_BUTTONS(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) ? \
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0)
+
+#define HIL_IDD_NUM_PROMPTS(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) ? \
+ ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK) \
+ >> HIL_IDD_IOD_PROMPT_SHIFT) : 0)
+
+/* The response to HIL EXD commands -- the "extended describe record" */
+#define HIL_EXD_HEADER_WRG 0x03 /* Supports type2 WRG */
+#define HIL_EXD_HEADER_WRG_TYPE1 0x01 /* Supports type1 WRG */
+#define HIL_EXD_HEADER_WRG_TYPE2 0x02 /* Supports type2 WRG */
+#define HIL_EXD_HEADER_RRG 0x04 /* Supports RRG command */
+#define HIL_EXD_HEADER_RNM 0x10 /* Supports RNM command */
+#define HIL_EXD_HEADER_RST 0x20 /* Supports RST command */
+#define HIL_EXD_HEADER_LOCALE 0x40 /* Contains locale code */
+
+#define HIL_EXD_NUM_RRG(header_ptr) \
+((*header_ptr & HIL_EXD_HEADER_RRG) ? \
+ (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0)
+
+#define HIL_EXD_NUM_WWG(header_ptr) \
+((*header_ptr & HIL_EXD_HEADER_WRG) ? \
+ (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) & \
+ HIL_PKT_DATA_MASK) : 0)
+
+#define HIL_EXD_LEN(header_ptr) \
+(!!(*header_ptr & HIL_EXD_HEADER_RRG) + \
+ !!(*header_ptr & HIL_EXD_HEADER_WRG) + \
+ !!(*header_ptr & HIL_EXD_HEADER_LOCALE) + \
+ 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1)
+
+#define HIL_EXD_LOCALE(header_ptr) \
+(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 : \
+ (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK))
+
+#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \
+(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1 : \
+ (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 - \
+ !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) + \
+ ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 - \
+ !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8))
+
+/* Device locale codes. */
+
+/* Last defined locale code. Everything above this is "Reserved",
+ and note that this same table applies to the Device ID Byte where
+ keyboards may have a nationality code which is only 5 bits. */
+#define HIL_LOCALE_MAX 0x1f
+
+/* Map to hopefully useful strings. I was trying to make these look
+ like locale.aliases strings do; maybe that isn't the right table to
+ emulate. In either case, I didn't have much to work on. */
+#define HIL_LOCALE_MAP \
+"", /* 0x00 Reserved */ \
+"", /* 0x01 Reserved */ \
+"", /* 0x02 Reserved */ \
+"swiss.french", /* 0x03 Swiss/French */ \
+"portuguese", /* 0x04 Portuguese */ \
+"arabic", /* 0x05 Arabic */ \
+"hebrew", /* 0x06 Hebrew */ \
+"english.canadian", /* 0x07 Canadian English */ \
+"turkish", /* 0x08 Turkish */ \
+"greek", /* 0x09 Greek */ \
+"thai", /* 0x0a Thai (Thailand) */ \
+"italian", /* 0x0b Italian */ \
+"korean", /* 0x0c Hangul (Korea) */ \
+"dutch", /* 0x0d Dutch */ \
+"swedish", /* 0x0e Swedish */ \
+"german", /* 0x0f German */ \
+"chinese", /* 0x10 Chinese-PRC */ \
+"chinese", /* 0x11 Chinese-ROC */ \
+"swiss.french", /* 0x12 Swiss/French II */ \
+"spanish", /* 0x13 Spanish */ \
+"swiss.german", /* 0x14 Swiss/German II */ \
+"flemish", /* 0x15 Belgian (Flemish) */ \
+"finnish", /* 0x16 Finnish */ \
+"english.uk", /* 0x17 United Kingdom */ \
+"french.canadian", /* 0x18 French/Canadian */ \
+"swiss.german", /* 0x19 Swiss/German */ \
+"norwegian", /* 0x1a Norwegian */ \
+"french", /* 0x1b French */ \
+"danish", /* 0x1c Danish */ \
+"japanese", /* 0x1d Katakana */ \
+"spanish", /* 0x1e Latin American/Spanish*/\
+"english.us" /* 0x1f United States */ \
+
+
+/* HIL keycodes */
+#define HIL_KEYCODES_SET1_TBLSIZE 128
+#define HIL_KEYCODES_SET1 \
+ KEY_5, KEY_RESERVED, KEY_RIGHTALT, KEY_LEFTALT, \
+ KEY_RIGHTSHIFT, KEY_LEFTSHIFT, KEY_LEFTCTRL, KEY_SYSRQ, \
+ KEY_KP4, KEY_KP8, KEY_KP5, KEY_KP9, \
+ KEY_KP6, KEY_KP7, KEY_KPCOMMA, KEY_KPENTER, \
+ KEY_KP1, KEY_KPSLASH, KEY_KP2, KEY_KPPLUS, \
+ KEY_KP3, KEY_KPASTERISK, KEY_KP0, KEY_KPMINUS, \
+ KEY_B, KEY_V, KEY_C, KEY_X, \
+ KEY_Z, KEY_RESERVED, KEY_RESERVED, KEY_ESC, \
+ KEY_6, KEY_F10, KEY_3, KEY_F11, \
+ KEY_KPDOT, KEY_F9, KEY_TAB /*KP*/, KEY_F12, \
+ KEY_H, KEY_G, KEY_F, KEY_D, \
+ KEY_S, KEY_A, KEY_RESERVED, KEY_CAPSLOCK, \
+ KEY_U, KEY_Y, KEY_T, KEY_R, \
+ KEY_E, KEY_W, KEY_Q, KEY_TAB, \
+ KEY_7, KEY_6, KEY_5, KEY_4, \
+ KEY_3, KEY_2, KEY_1, KEY_GRAVE, \
+ KEY_F13, KEY_F14, KEY_F15, KEY_F16, \
+ KEY_F17, KEY_F18, KEY_F19, KEY_F20, \
+ KEY_MENU, KEY_F4, KEY_F3, KEY_F2, \
+ KEY_F1, KEY_VOLUMEUP, KEY_STOP, KEY_SENDFILE, \
+ KEY_SYSRQ, KEY_F5, KEY_F6, KEY_F7, \
+ KEY_F8, KEY_VOLUMEDOWN, KEY_DEL_EOL, KEY_DEL_EOS, \
+ KEY_8, KEY_9, KEY_0, KEY_MINUS, \
+ KEY_EQUAL, KEY_BACKSPACE, KEY_INS_LINE, KEY_DEL_LINE, \
+ KEY_I, KEY_O, KEY_P, KEY_LEFTBRACE, \
+ KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_INSERT, KEY_DELETE, \
+ KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \
+ KEY_APOSTROPHE, KEY_ENTER, KEY_HOME, KEY_PAGEUP, \
+ KEY_M, KEY_COMMA, KEY_DOT, KEY_SLASH, \
+ KEY_BACKSLASH, KEY_SELECT, KEY_102ND, KEY_PAGEDOWN, \
+ KEY_N, KEY_SPACE, KEY_NEXT, KEY_RESERVED, \
+ KEY_LEFT, KEY_DOWN, KEY_UP, KEY_RIGHT
+
+
+#define HIL_KEYCODES_SET3_TBLSIZE 128
+#define HIL_KEYCODES_SET3 \
+ KEY_RESERVED, KEY_ESC, KEY_1, KEY_2, \
+ KEY_3, KEY_4, KEY_5, KEY_6, \
+ KEY_7, KEY_8, KEY_9, KEY_0, \
+ KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_TAB, \
+ KEY_Q, KEY_W, KEY_E, KEY_R, \
+ KEY_T, KEY_Y, KEY_U, KEY_I, \
+ KEY_O, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, \
+ KEY_ENTER, KEY_LEFTCTRL, KEY_A, KEY_S, \
+ KEY_D, KEY_F, KEY_G, KEY_H, \
+ KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \
+ KEY_APOSTROPHE,KEY_GRAVE, KEY_LEFTSHIFT, KEY_BACKSLASH, \
+ KEY_Z, KEY_X, KEY_C, KEY_V, \
+ KEY_B, KEY_N, KEY_M, KEY_COMMA, \
+ KEY_DOT, KEY_SLASH, KEY_RIGHTSHIFT, KEY_KPASTERISK, \
+ KEY_LEFTALT, KEY_SPACE, KEY_CAPSLOCK, KEY_F1, \
+ KEY_F2, KEY_F3, KEY_F4, KEY_F5, \
+ KEY_F6, KEY_F7, KEY_F8, KEY_F9, \
+ KEY_F10, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_KP7, \
+ KEY_KP8, KEY_KP9, KEY_KPMINUS, KEY_KP4, \
+ KEY_KP5, KEY_KP6, KEY_KPPLUS, KEY_KP1, \
+ KEY_KP2, KEY_KP3, KEY_KP0, KEY_KPDOT, \
+ KEY_SYSRQ, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_UP, KEY_LEFT, KEY_DOWN, KEY_RIGHT, \
+ KEY_HOME, KEY_PAGEUP, KEY_END, KEY_PAGEDOWN, \
+ KEY_INSERT, KEY_DELETE, KEY_102ND, KEY_RESERVED, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_F1, KEY_F2, KEY_F3, KEY_F4, \
+ KEY_F5, KEY_F6, KEY_F7, KEY_F8, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED
+
+
+/* Response to POL command, the "poll record header" */
+
+#define HIL_POL_NUM_AXES_MASK 0x03 /* Number of axis reported */
+#define HIL_POL_CTS 0x04 /* Device ready to receive data */
+#define HIL_POL_STATUS_PENDING 0x08 /* Device has status to report */
+#define HIL_POL_CHARTYPE_MASK 0x70 /* Type of character data to follow */
+#define HIL_POL_CHARTYPE_NONE 0x00 /* No character data to follow */
+#define HIL_POL_CHARTYPE_RSVD1 0x10 /* Reserved Set 1 */
+#define HIL_POL_CHARTYPE_ASCII 0x20 /* U.S. ASCII */
+#define HIL_POL_CHARTYPE_BINARY 0x30 /* Binary data */
+#define HIL_POL_CHARTYPE_SET1 0x40 /* Keycode Set 1 */
+#define HIL_POL_CHARTYPE_RSVD2 0x50 /* Reserved Set 2 */
+#define HIL_POL_CHARTYPE_SET2 0x60 /* Keycode Set 2 */
+#define HIL_POL_CHARTYPE_SET3 0x70 /* Keycode Set 3 */
+#define HIL_POL_AXIS_ALT 0x80 /* Data is from axis set 2 */
+
+
+#endif /* _HIL_H_ */
diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h
new file mode 100644
index 0000000..8df29ca
--- /dev/null
+++ b/include/linux/hil_mlc.h
@@ -0,0 +1,168 @@
+/*
+ * HP Human Interface Loop Master Link Controller driver.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A
+ *
+ */
+
+#include <linux/hil.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <asm/semaphore.h>
+#include <linux/serio.h>
+#include <linux/list.h>
+
+typedef struct hil_mlc hil_mlc;
+
+/* The HIL has a complicated state engine.
+ * We define the structure of nodes in the state engine here.
+ */
+enum hilse_act {
+ /* HILSE_OUT prepares to receive input if the next node
+ * is an IN or EXPECT, and then sends the given packet.
+ */
+ HILSE_OUT = 0,
+
+ /* HILSE_CTS checks if the loop is busy. */
+ HILSE_CTS,
+
+ /* HILSE_OUT_LAST sends the given command packet to
+ * the last configured/running device on the loop.
+ */
+ HILSE_OUT_LAST,
+
+ /* HILSE_OUT_DISC sends the given command packet to
+ * the next device past the last configured/running one.
+ */
+ HILSE_OUT_DISC,
+
+ /* HILSE_FUNC runs a callback function with given arguments.
+ * a positive return value causes the "ugly" branch to be taken.
+ */
+ HILSE_FUNC,
+
+ /* HILSE_IN simply expects any non-errored packet to arrive
+ * within arg usecs.
+ */
+ HILSE_IN = 0x100,
+
+ /* HILSE_EXPECT expects a particular packet to arrive
+ * within arg usecs, any other packet is considered an error.
+ */
+ HILSE_EXPECT,
+
+ /* HILSE_EXPECT_LAST as above but dev field should be last
+ * discovered/operational device.
+ */
+ HILSE_EXPECT_LAST,
+
+ /* HILSE_EXPECT_LAST as above but dev field should be first
+ * undiscovered/inoperational device.
+ */
+ HILSE_EXPECT_DISC
+};
+
+typedef int (hilse_func) (hil_mlc *mlc, int arg);
+struct hilse_node {
+ enum hilse_act act; /* How to process this node */
+ union {
+ hilse_func *func; /* Function to call if HILSE_FUNC */
+ hil_packet packet; /* Packet to send or to compare */
+ } object;
+ int arg; /* Timeout in usec or parm for func */
+ int good; /* Node to jump to on success */
+ int bad; /* Node to jump to on error */
+ int ugly; /* Node to jump to on timeout */
+};
+
+/* Methods for back-end drivers, e.g. hp_sdc_mlc */
+typedef int (hil_mlc_cts) (hil_mlc *mlc);
+typedef void (hil_mlc_out) (hil_mlc *mlc);
+typedef int (hil_mlc_in) (hil_mlc *mlc, suseconds_t timeout);
+
+struct hil_mlc_devinfo {
+ uint8_t idd[16]; /* Device ID Byte and Describe Record */
+ uint8_t rsc[16]; /* Security Code Header and Record */
+ uint8_t exd[16]; /* Extended Describe Record */
+ uint8_t rnm[16]; /* Device name as returned by RNM command */
+};
+
+struct hil_mlc_serio_map {
+ hil_mlc *mlc;
+ int di_revmap;
+ int didx;
+};
+
+/* How many (possibly old/detached) devices the we try to keep track of */
+#define HIL_MLC_DEVMEM 16
+
+struct hil_mlc {
+ struct list_head list; /* hil_mlc is organized as linked list */
+
+ rwlock_t lock;
+
+ void *priv; /* Data specific to a particular type of MLC */
+
+ int seidx; /* Current node in state engine */
+ int istarted, ostarted;
+
+ hil_mlc_cts *cts;
+ struct semaphore csem; /* Raised when loop idle */
+
+ hil_mlc_out *out;
+ struct semaphore osem; /* Raised when outpacket dispatched */
+ hil_packet opacket;
+
+ hil_mlc_in *in;
+ struct semaphore isem; /* Raised when a packet arrives */
+ hil_packet ipacket[16];
+ hil_packet imatch;
+ int icount;
+ struct timeval instart;
+ suseconds_t intimeout;
+
+ int ddi; /* Last operational device id */
+ int lcv; /* LCV to throttle loops */
+ struct timeval lcv_tv; /* Time loop was started */
+
+ int di_map[7]; /* Maps below items to live devs */
+ struct hil_mlc_devinfo di[HIL_MLC_DEVMEM];
+ struct serio *serio[HIL_MLC_DEVMEM];
+ struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM];
+ hil_packet serio_opacket[HIL_MLC_DEVMEM];
+ int serio_oidx[HIL_MLC_DEVMEM];
+ struct hil_mlc_devinfo di_scratch; /* Temporary area */
+
+ int opercnt;
+
+ struct tasklet_struct *tasklet;
+};
+
+int hil_mlc_register(hil_mlc *mlc);
+int hil_mlc_unregister(hil_mlc *mlc);
diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
new file mode 100644
index 0000000..debd715
--- /dev/null
+++ b/include/linux/hp_sdc.h
@@ -0,0 +1,300 @@
+/*
+ * HP i8042 System Device Controller -- header
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ *
+ * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A
+ *
+ * System Device Controller Microprocessor Firmware Theory of Operation
+ * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2
+ *
+ */
+
+#ifndef _LINUX_HP_SDC_H
+#define _LINUX_HP_SDC_H
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#if defined(__hppa__)
+#include <asm/hardware.h>
+#endif
+
+
+/* No 4X status reads take longer than this (in usec).
+ */
+#define HP_SDC_MAX_REG_DELAY 20000
+
+typedef void (hp_sdc_irqhook) (int irq, void *dev_id,
+ uint8_t status, uint8_t data);
+
+int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback);
+int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback);
+int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback);
+
+typedef struct {
+ int actidx; /* Start of act. Acts are atomic WRT I/O to SDC */
+ int idx; /* Index within the act */
+ int endidx; /* transaction is over and done if idx == endidx */
+ uint8_t *seq; /* commands/data for the transaction */
+ union {
+ hp_sdc_irqhook *irqhook; /* Callback, isr or tasklet context */
+ struct semaphore *semaphore; /* Semaphore to sleep on. */
+ } act;
+} hp_sdc_transaction;
+int hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
+int hp_sdc_dequeue_transaction(hp_sdc_transaction *this);
+
+/* The HP_SDC_ACT* values are peculiar to this driver.
+ * Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another
+ * act to perform the dealloc.
+ */
+#define HP_SDC_ACT_PRECMD 0x01 /* Send a command first */
+#define HP_SDC_ACT_DATAREG 0x02 /* Set data registers */
+#define HP_SDC_ACT_DATAOUT 0x04 /* Send data bytes */
+#define HP_SDC_ACT_POSTCMD 0x08 /* Send command after */
+#define HP_SDC_ACT_DATAIN 0x10 /* Collect data after */
+#define HP_SDC_ACT_DURING 0x1f
+#define HP_SDC_ACT_SEMAPHORE 0x20 /* Raise semaphore after */
+#define HP_SDC_ACT_CALLBACK 0x40 /* Pass data to IRQ handler */
+#define HP_SDC_ACT_DEALLOC 0x80 /* Destroy transaction after */
+#define HP_SDC_ACT_AFTER 0xe0
+#define HP_SDC_ACT_DEAD 0x60 /* Act timed out. */
+
+/* Rest of the flags are straightforward representation of the SDC interface */
+#define HP_SDC_STATUS_IBF 0x02 /* Input buffer full */
+
+#define HP_SDC_STATUS_IRQMASK 0xf0 /* Bits containing "level 1" irq */
+#define HP_SDC_STATUS_PERIODIC 0x10 /* Periodic 10ms timer */
+#define HP_SDC_STATUS_USERTIMER 0x20 /* "Special purpose" timer */
+#define HP_SDC_STATUS_TIMER 0x30 /* Both PERIODIC and USERTIMER */
+#define HP_SDC_STATUS_REG 0x40 /* Data from an i8042 register */
+#define HP_SDC_STATUS_HILCMD 0x50 /* Command from HIL MLC */
+#define HP_SDC_STATUS_HILDATA 0x60 /* Data from HIL MLC */
+#define HP_SDC_STATUS_PUP 0x70 /* Sucessful power-up self test */
+#define HP_SDC_STATUS_KCOOKED 0x80 /* Key from cooked kbd */
+#define HP_SDC_STATUS_KRPG 0xc0 /* Key from Repeat Gen */
+#define HP_SDC_STATUS_KMOD_SUP 0x10 /* Shift key is up */
+#define HP_SDC_STATUS_KMOD_CUP 0x20 /* Control key is up */
+
+#define HP_SDC_NMISTATUS_FHS 0x40 /* NMI is a fast handshake irq */
+
+/* Internal i8042 registers (there are more, but they are not too useful). */
+
+#define HP_SDC_USE 0x02 /* Resource usage (including OB bit) */
+#define HP_SDC_IM 0x04 /* Interrupt mask */
+#define HP_SDC_CFG 0x11 /* Configuration register */
+#define HP_SDC_KBLANGUAGE 0x12 /* Keyboard language */
+
+#define HP_SDC_D0 0x70 /* General purpose data buffer 0 */
+#define HP_SDC_D1 0x71 /* General purpose data buffer 1 */
+#define HP_SDC_D2 0x72 /* General purpose data buffer 2 */
+#define HP_SDC_D3 0x73 /* General purpose data buffer 3 */
+#define HP_SDC_VT1 0x74 /* Timer for voice 1 */
+#define HP_SDC_VT2 0x75 /* Timer for voice 2 */
+#define HP_SDC_VT3 0x76 /* Timer for voice 3 */
+#define HP_SDC_VT4 0x77 /* Timer for voice 4 */
+#define HP_SDC_KBN 0x78 /* Which HIL devs are Nimitz */
+#define HP_SDC_KBC 0x79 /* Which HIL devs are cooked kbds */
+#define HP_SDC_LPS 0x7a /* i8042's view of HIL status */
+#define HP_SDC_LPC 0x7b /* i8042's view of HIL "control" */
+#define HP_SDC_RSV 0x7c /* Reserved "for testing" */
+#define HP_SDC_LPR 0x7d /* i8042 count of HIL reconfigs */
+#define HP_SDC_XTD 0x7e /* "Extended Configuration" register */
+#define HP_SDC_STR 0x7f /* i8042 self-test result */
+
+/* Bitfields for above registers */
+#define HP_SDC_USE_LOOP 0x04 /* Command is currently on the loop. */
+
+#define HP_SDC_IM_MASK 0x1f /* these bits not part of cmd/status */
+#define HP_SDC_IM_FH 0x10 /* Mask the fast handshake irq */
+#define HP_SDC_IM_PT 0x08 /* Mask the periodic timer irq */
+#define HP_SDC_IM_TIMERS 0x04 /* Mask the MT/DT/CT irq */
+#define HP_SDC_IM_RESET 0x02 /* Mask the reset key irq */
+#define HP_SDC_IM_HIL 0x01 /* Mask the HIL MLC irq */
+
+#define HP_SDC_CFG_ROLLOVER 0x08 /* WTF is "N-key rollover"? */
+#define HP_SDC_CFG_KBD 0x10 /* There is a keyboard */
+#define HP_SDC_CFG_NEW 0x20 /* Supports/uses HIL MLC */
+#define HP_SDC_CFG_KBD_OLD 0x03 /* keyboard code for non-HIL */
+#define HP_SDC_CFG_KBD_NEW 0x07 /* keyboard code from HIL autoconfig */
+#define HP_SDC_CFG_REV 0x40 /* Code revision bit */
+#define HP_SDC_CFG_IDPROM 0x80 /* IDPROM present in kbd (not HIL) */
+
+#define HP_SDC_LPS_NDEV 0x07 /* # devices autoconfigured on HIL */
+#define HP_SDC_LPS_ACSUCC 0x08 /* loop autoconfigured successfully */
+#define HP_SDC_LPS_ACFAIL 0x80 /* last loop autoconfigure failed */
+
+#define HP_SDC_LPC_APE_IPF 0x01 /* HIL MLC APE/IPF (autopoll) set */
+#define HP_SDC_LPC_ARCONERR 0x02 /* i8042 autoreconfigs loop on err */
+#define HP_SDC_LPC_ARCQUIET 0x03 /* i8042 doesn't report autoreconfigs*/
+#define HP_SDC_LPC_COOK 0x10 /* i8042 cooks devices in _KBN */
+#define HP_SDC_LPC_RC 0x80 /* causes autoreconfig */
+
+#define HP_SDC_XTD_REV 0x07 /* contains revision code */
+#define HP_SDC_XTD_REV_STRINGS(val, str) \
+switch (val) { \
+ case 0x1: str = "1820-3712"; break; \
+ case 0x2: str = "1820-4379"; break; \
+ case 0x3: str = "1820-4784"; break; \
+ default: str = "unknown"; \
+};
+#define HP_SDC_XTD_BEEPER 0x08 /* TI SN76494 beeper available */
+#define HP_SDC_XTD_BBRTC 0x20 /* OKI MSM-58321 BBRTC present */
+
+#define HP_SDC_CMD_LOAD_RT 0x31 /* Load real time (from 8042) */
+#define HP_SDC_CMD_LOAD_FHS 0x36 /* Load the fast handshake timer */
+#define HP_SDC_CMD_LOAD_MT 0x38 /* Load the match timer */
+#define HP_SDC_CMD_LOAD_DT 0x3B /* Load the delay timer */
+#define HP_SDC_CMD_LOAD_CT 0x3E /* Load the cycle timer */
+
+#define HP_SDC_CMD_SET_IM 0x40 /* 010xxxxx == set irq mask */
+
+/* The documents provided do not explicitly state that all registers betweem
+ * 0x01 and 0x1f inclusive can be read by sending their register index as a
+ * command, but this is implied and appears to be the case.
+ */
+#define HP_SDC_CMD_READ_RAM 0x00 /* Load from i8042 RAM (autoinc) */
+#define HP_SDC_CMD_READ_USE 0x02 /* Undocumented! Load from usage reg */
+#define HP_SDC_CMD_READ_IM 0x04 /* Load current interrupt mask */
+#define HP_SDC_CMD_READ_KCC 0x11 /* Load primary kbd config code */
+#define HP_SDC_CMD_READ_KLC 0x12 /* Load primary kbd language code */
+#define HP_SDC_CMD_READ_T1 0x13 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T2 0x14 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T3 0x15 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T4 0x16 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T5 0x17 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_D0 0xf0 /* Load from i8042 RAM location 0x70 */
+#define HP_SDC_CMD_READ_D1 0xf1 /* Load from i8042 RAM location 0x71 */
+#define HP_SDC_CMD_READ_D2 0xf2 /* Load from i8042 RAM location 0x72 */
+#define HP_SDC_CMD_READ_D3 0xf3 /* Load from i8042 RAM location 0x73 */
+#define HP_SDC_CMD_READ_VT1 0xf4 /* Load from i8042 RAM location 0x74 */
+#define HP_SDC_CMD_READ_VT2 0xf5 /* Load from i8042 RAM location 0x75 */
+#define HP_SDC_CMD_READ_VT3 0xf6 /* Load from i8042 RAM location 0x76 */
+#define HP_SDC_CMD_READ_VT4 0xf7 /* Load from i8042 RAM location 0x77 */
+#define HP_SDC_CMD_READ_KBN 0xf8 /* Load from i8042 RAM location 0x78 */
+#define HP_SDC_CMD_READ_KBC 0xf9 /* Load from i8042 RAM location 0x79 */
+#define HP_SDC_CMD_READ_LPS 0xfa /* Load from i8042 RAM location 0x7a */
+#define HP_SDC_CMD_READ_LPC 0xfb /* Load from i8042 RAM location 0x7b */
+#define HP_SDC_CMD_READ_RSV 0xfc /* Load from i8042 RAM location 0x7c */
+#define HP_SDC_CMD_READ_LPR 0xfd /* Load from i8042 RAM location 0x7d */
+#define HP_SDC_CMD_READ_XTD 0xfe /* Load from i8042 RAM location 0x7e */
+#define HP_SDC_CMD_READ_STR 0xff /* Load from i8042 RAM location 0x7f */
+
+#define HP_SDC_CMD_SET_ARD 0xA0 /* Set emulated autorepeat delay */
+#define HP_SDC_CMD_SET_ARR 0xA2 /* Set emulated autorepeat rate */
+#define HP_SDC_CMD_SET_BELL 0xA3 /* Set voice 3 params for "beep" cmd */
+#define HP_SDC_CMD_SET_RPGR 0xA6 /* Set "RPG" irq rate (doesn't work) */
+#define HP_SDC_CMD_SET_RTMS 0xAD /* Set the RTC time (milliseconds) */
+#define HP_SDC_CMD_SET_RTD 0xAF /* Set the RTC time (days) */
+#define HP_SDC_CMD_SET_FHS 0xB2 /* Set fast handshake timer */
+#define HP_SDC_CMD_SET_MT 0xB4 /* Set match timer */
+#define HP_SDC_CMD_SET_DT 0xB7 /* Set delay timer */
+#define HP_SDC_CMD_SET_CT 0xBA /* Set cycle timer */
+#define HP_SDC_CMD_SET_RAMP 0xC1 /* Reset READ_RAM autoinc counter */
+#define HP_SDC_CMD_SET_D0 0xe0 /* Load to i8042 RAM location 0x70 */
+#define HP_SDC_CMD_SET_D1 0xe1 /* Load to i8042 RAM location 0x71 */
+#define HP_SDC_CMD_SET_D2 0xe2 /* Load to i8042 RAM location 0x72 */
+#define HP_SDC_CMD_SET_D3 0xe3 /* Load to i8042 RAM location 0x73 */
+#define HP_SDC_CMD_SET_VT1 0xe4 /* Load to i8042 RAM location 0x74 */
+#define HP_SDC_CMD_SET_VT2 0xe5 /* Load to i8042 RAM location 0x75 */
+#define HP_SDC_CMD_SET_VT3 0xe6 /* Load to i8042 RAM location 0x76 */
+#define HP_SDC_CMD_SET_VT4 0xe7 /* Load to i8042 RAM location 0x77 */
+#define HP_SDC_CMD_SET_KBN 0xe8 /* Load to i8042 RAM location 0x78 */
+#define HP_SDC_CMD_SET_KBC 0xe9 /* Load to i8042 RAM location 0x79 */
+#define HP_SDC_CMD_SET_LPS 0xea /* Load to i8042 RAM location 0x7a */
+#define HP_SDC_CMD_SET_LPC 0xeb /* Load to i8042 RAM location 0x7b */
+#define HP_SDC_CMD_SET_RSV 0xec /* Load to i8042 RAM location 0x7c */
+#define HP_SDC_CMD_SET_LPR 0xed /* Load to i8042 RAM location 0x7d */
+#define HP_SDC_CMD_SET_XTD 0xee /* Load to i8042 RAM location 0x7e */
+#define HP_SDC_CMD_SET_STR 0xef /* Load to i8042 RAM location 0x7f */
+
+#define HP_SDC_CMD_DO_RTCW 0xc2 /* i8042 RAM 0x70 --> RTC */
+#define HP_SDC_CMD_DO_RTCR 0xc3 /* RTC[0x70 0:3] --> irq/status/data */
+#define HP_SDC_CMD_DO_BEEP 0xc4 /* i8042 RAM 0x70-74 --> beeper,VT3 */
+#define HP_SDC_CMD_DO_HIL 0xc5 /* i8042 RAM 0x70-73 -->
+ HIL MLC R0,R1 i8042 HIL watchdog */
+
+/* Values used to (de)mangle input/output to/from the HIL MLC */
+#define HP_SDC_DATA 0x40 /* Data from an 8042 register */
+#define HP_SDC_HIL_CMD 0x50 /* Data from HIL MLC R1/8042 */
+#define HP_SDC_HIL_R1MASK 0x0f /* Contents of HIL MLC R1 0:3 */
+#define HP_SDC_HIL_AUTO 0x10 /* Set if POL results from i8042 */
+#define HP_SDC_HIL_ISERR 0x80 /* Has meaning as in next 4 values */
+#define HP_SDC_HIL_RC_DONE 0x80 /* i8042 auto-configured loop */
+#define HP_SDC_HIL_ERR 0x81 /* HIL MLC R2 had a bit set */
+#define HP_SDC_HIL_TO 0x82 /* i8042 HIL watchdog expired */
+#define HP_SDC_HIL_RC 0x84 /* i8042 is auto-configuring loop */
+#define HP_SDC_HIL_DAT 0x60 /* Data from HIL MLC R0 */
+
+
+typedef struct {
+ rwlock_t ibf_lock;
+ rwlock_t lock; /* user/tasklet lock */
+ rwlock_t rtq_lock; /* isr/tasklet lock */
+ rwlock_t hook_lock; /* isr/user lock for handler add/del */
+
+ unsigned int irq, nmi; /* Our IRQ lines */
+ unsigned long base_io, status_io, data_io; /* Our IO ports */
+
+ uint8_t im; /* Interrupt mask */
+ int set_im; /* Interrupt mask needs to be set. */
+
+ int ibf; /* Last known status of IBF flag */
+ uint8_t wi; /* current i8042 write index */
+ uint8_t r7[4]; /* current i8042[0x70 - 0x74] values */
+ uint8_t r11, r7e; /* Values from version/revision regs */
+
+ hp_sdc_irqhook *timer, *reg, *hil, *pup, *cooked;
+
+#define HP_SDC_QUEUE_LEN 16
+ hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
+
+ int rcurr, rqty; /* Current read transact in process */
+ struct timeval rtv; /* Time when current read started */
+ int wcurr; /* Current write transact in process */
+
+ int dev_err; /* carries status from registration */
+#if defined(__hppa__)
+ struct parisc_device *dev;
+#elif defined(__mc68000__)
+ void *dev;
+#else
+#error No support for device registration on this arch yet.
+#endif
+
+ struct timer_list kicker; /* Keeps below task alive */
+ struct tasklet_struct task;
+
+} hp_i8042_sdc;
+
+#endif /* _LINUX_HP_SDC_H */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index d664330..0cea162 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -16,7 +16,6 @@
int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int);
-void zap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
void unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
int hugetlb_prefault(struct address_space *, struct vm_area_struct *);
int hugetlb_report_meminfo(char *);
@@ -87,7 +86,6 @@
#define follow_huge_addr(mm, addr, write) ERR_PTR(-EINVAL)
#define copy_hugetlb_page_range(src, dst, vma) ({ BUG(); 0; })
#define hugetlb_prefault(mapping, vma) ({ BUG(); 0; })
-#define zap_hugepage_range(vma, start, len) BUG()
#define unmap_hugepage_range(vma, start, end) BUG()
#define is_hugepage_mem_enough(size) 0
#define hugetlb_report_meminfo(buf) 0
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
index 1109044..c0e7fab 100644
--- a/include/linux/i2c-algo-bit.h
+++ b/include/linux/i2c-algo-bit.h
@@ -21,8 +21,6 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-algo-bit.h,v 1.10 2003/01/21 08:08:16 kmalkki Exp $ */
-
#ifndef _LINUX_I2C_ALGO_BIT_H
#define _LINUX_I2C_ALGO_BIT_H
@@ -46,8 +44,6 @@
int timeout; /* in jiffies */
};
-#define I2C_BIT_ADAP_MAX 16
-
int i2c_bit_add_bus(struct i2c_adapter *);
int i2c_bit_del_bus(struct i2c_adapter *);
diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h
index 941b786..226693e 100644
--- a/include/linux/i2c-algo-pca.h
+++ b/include/linux/i2c-algo-pca.h
@@ -9,8 +9,6 @@
int (*wait_for_interrupt) (struct i2c_algo_pca_data *adap);
};
-#define I2C_PCA_ADAP_MAX 16
-
int i2c_pca_add_bus(struct i2c_adapter *);
int i2c_pca_del_bus(struct i2c_adapter *);
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
index 2a50856..18b0adf 100644
--- a/include/linux/i2c-algo-pcf.h
+++ b/include/linux/i2c-algo-pcf.h
@@ -22,8 +22,6 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-algo-pcf.h,v 1.8 2003/01/21 08:08:16 kmalkki Exp $ */
-
#ifndef _LINUX_I2C_ALGO_PCF_H
#define _LINUX_I2C_ALGO_PCF_H
@@ -41,8 +39,6 @@
int timeout;
};
-#define I2C_PCF_ADAP_MAX 16
-
int i2c_pcf_add_bus(struct i2c_adapter *);
int i2c_pcf_del_bus(struct i2c_adapter *);
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
index 5416956..81c229a 100644
--- a/include/linux/i2c-dev.h
+++ b/include/linux/i2c-dev.h
@@ -19,8 +19,6 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* $Id: i2c-dev.h,v 1.13 2003/01/21 08:08:16 kmalkki Exp $ */
-
#ifndef _LINUX_I2C_DEV_H
#define _LINUX_I2C_DEV_H
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 44f3087..1ce4b54 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -164,10 +164,7 @@
/* --- Bit algorithm adapters */
#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
-#define I2C_HW_B_LPC 0x010001 /* Parallel port control reg. */
#define I2C_HW_B_SER 0x010002 /* Serial line interface */
-#define I2C_HW_B_ELV 0x010003 /* ELV Card */
-#define I2C_HW_B_VELLE 0x010004 /* Vellemann K8000 */
#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
#define I2C_HW_B_WNV 0x010006 /* Winnov Videums */
#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 3d49a30..5e19a7b 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -23,15 +23,15 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c.h,v 1.68 2003/01/21 08:08:16 kmalkki Exp $ */
-
#ifndef _LINUX_I2C_H
#define _LINUX_I2C_H
#include <linux/module.h>
#include <linux/types.h>
#include <linux/i2c-id.h>
+#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
+#include <linux/sched.h> /* for completion */
#include <asm/semaphore.h>
/* --- For i2c-isa ---------------------------------------------------- */
@@ -94,10 +94,10 @@
extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
u8 command, u16 value);
-/* Returns the number of bytes transferred */
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length,
u8 *values);
+/* Returns the number of read bytes */
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
u8 command, u8 *values);
@@ -391,10 +391,6 @@
#define I2C_FUNC_10BIT_ADDR 0x00000002
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_READ_WORD_DATA_PEC 0x00000800 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC 0x00001000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_PROC_CALL_PEC 0x00002000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL_PEC 0x00004000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_QUICK 0x00010000
#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
@@ -410,8 +406,6 @@
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC 0x40000000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC 0x80000000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
I2C_FUNC_SMBUS_WRITE_BYTE)
@@ -425,17 +419,6 @@
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
#define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2)
-#define I2C_FUNC_SMBUS_BLOCK_DATA_PEC (I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC)
-#define I2C_FUNC_SMBUS_WORD_DATA_PEC (I2C_FUNC_SMBUS_READ_WORD_DATA_PEC | \
- I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC)
-
-#define I2C_FUNC_SMBUS_READ_BYTE_PEC I2C_FUNC_SMBUS_READ_BYTE_DATA
-#define I2C_FUNC_SMBUS_WRITE_BYTE_PEC I2C_FUNC_SMBUS_WRITE_BYTE_DATA
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA_PEC I2C_FUNC_SMBUS_READ_WORD_DATA
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA_PEC I2C_FUNC_SMBUS_WRITE_WORD_DATA
-#define I2C_FUNC_SMBUS_BYTE_PEC I2C_FUNC_SMBUS_BYTE_DATA
-#define I2C_FUNC_SMBUS_BYTE_DATA_PEC I2C_FUNC_SMBUS_WORD_DATA
#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
I2C_FUNC_SMBUS_BYTE | \
@@ -443,20 +426,17 @@
I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_PROC_CALL | \
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC | \
I2C_FUNC_SMBUS_I2C_BLOCK)
/*
* Data for SMBus Messages
*/
#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
-#define I2C_SMBUS_I2C_BLOCK_MAX 32 /* Not specified but we use same structure */
union i2c_smbus_data {
__u8 byte;
__u16 word;
- __u8 block[I2C_SMBUS_BLOCK_MAX + 3]; /* block[0] is used for length */
- /* one more for read length in block process call */
- /* and one more for PEC */
+ __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+ /* and one more for user-space compatibility */
};
/* smbus_access read or write markers */
@@ -473,10 +453,6 @@
#define I2C_SMBUS_BLOCK_DATA 5
#define I2C_SMBUS_I2C_BLOCK_DATA 6
#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
-#define I2C_SMBUS_BLOCK_DATA_PEC 8 /* SMBus 2.0 */
-#define I2C_SMBUS_PROC_CALL_PEC 9 /* SMBus 2.0 */
-#define I2C_SMBUS_BLOCK_PROC_CALL_PEC 10 /* SMBus 2.0 */
-#define I2C_SMBUS_WORD_DATA_PEC 11 /* SMBus 2.0 */
/* ----- commands for the ioctl like i2c_command call:
@@ -506,11 +482,6 @@
#define I2C_SMBUS 0x0720 /* SMBus-level access */
-/* ... algo-bit.c recognizes */
-#define I2C_UDELAY 0x0705 /* set delay in microsecs between each */
- /* written byte (except address) */
-#define I2C_MDELAY 0x0706 /* millisec delay between written bytes */
-
/* ----- I2C-DEV: char device interface stuff ------------------------- */
#define I2C_MAJOR 89 /* Device major number */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index bdc286e..d79c8a4 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -25,10 +25,14 @@
/* How many different OSM's are we allowing */
#define I2O_MAX_DRIVERS 8
-#include <asm/io.h>
-#include <asm/semaphore.h> /* Needed for MUTEX init macros */
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h> /* work_struct */
+
+#include <asm/io.h>
+#include <asm/semaphore.h> /* Needed for MUTEX init macros */
/* message queue empty */
#define I2O_QUEUE_EMPTY 0xffffffff
@@ -66,8 +70,6 @@
struct device device;
struct semaphore lock; /* device lock */
-
- struct class_device classdev; /* i2o device class */
};
/*
@@ -194,7 +196,7 @@
struct resource mem_resource; /* Mem resource allocated to the IOP */
struct device device;
- struct class_device classdev; /* I2O controller class */
+ struct class_device *classdev; /* I2O controller class device */
struct i2o_device *exec; /* Executive */
#if BITS_PER_LONG == 64
spinlock_t context_list_lock; /* lock for context_list */
@@ -492,7 +494,7 @@
* Returns 0 on success or -ENOMEM on failure.
*/
static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
- size_t len, unsigned int gfp_mask)
+ size_t len, gfp_t gfp_mask)
{
struct pci_dev *pdev = to_pci_dev(dev);
int dma_64 = 0;
@@ -551,7 +553,7 @@
* Returns the 0 on success or negative error code on failure.
*/
static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
- size_t len, unsigned int gfp_mask)
+ size_t len, gfp_t gfp_mask)
{
i2o_dma_free(dev, addr);
diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h
index 2ef0b21..1c7a0dd 100644
--- a/include/linux/ibmtr.h
+++ b/include/linux/ibmtr.h
@@ -7,8 +7,8 @@
/* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */
#define TR_RETRY_INTERVAL (30*HZ) /* 500 on PC = 5 s */
-#define TR_RST_TIME (HZ/20) /* 5 on PC = 50 ms */
-#define TR_BUSY_INTERVAL (HZ/5) /* 5 on PC = 200 ms */
+#define TR_RST_TIME (msecs_to_jiffies(50)) /* 5 on PC = 50 ms */
+#define TR_BUSY_INTERVAL (msecs_to_jiffies(200)) /* 5 on PC = 200 ms */
#define TR_SPIN_INTERVAL (3*HZ) /* 3 seconds before init timeout */
#define TR_ISA 1
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a6dbb51..3461abc 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -218,7 +218,7 @@
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_forced
+ ide_au1xxx, ide_forced
} hwif_chipset_t;
/*
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 3d5de45..7fb3ff9 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -71,7 +71,7 @@
*/
void *idr_find(struct idr *idp, int id);
-int idr_pre_get(struct idr *idp, unsigned gfp_mask);
+int idr_pre_get(struct idr *idp, gfp_t gfp_mask);
int idr_get_new(struct idr *idp, void *ptr, int *id);
int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
void idr_remove(struct idr *idp, int id);
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 0856548..a8b1a20 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -84,6 +84,7 @@
#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */
#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */
#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */
+#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */
#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */
#define ARPHRD_NONE 0xFFFE /* zero header length */
diff --git a/include/linux/input.h b/include/linux/input.h
index e8c296f..f623c74 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -12,6 +12,7 @@
#ifdef __KERNEL__
#include <linux/time.h>
#include <linux/list.h>
+#include <linux/device.h>
#else
#include <sys/time.h>
#include <sys/ioctl.h>
@@ -644,6 +645,7 @@
#define BUS_ADB 0x17
#define BUS_I2C 0x18
#define BUS_HOST 0x19
+#define BUS_GSC 0x1A
/*
* Values describing the status of an effect
@@ -889,11 +891,15 @@
struct semaphore sem; /* serializes open and close operations */
unsigned int users;
- struct device *dev;
+ struct class_device cdev;
+ struct device *dev; /* will be removed soon */
+
+ int dynalloc; /* temporarily */
struct list_head h_list;
struct list_head node;
};
+#define to_input_dev(d) container_of(d, struct input_dev, cdev)
/*
* Structure for hotplug & device<->driver matching.
@@ -984,6 +990,23 @@
INIT_LIST_HEAD(&dev->node);
}
+struct input_dev *input_allocate_device(void);
+
+static inline void input_free_device(struct input_dev *dev)
+{
+ kfree(dev);
+}
+
+static inline struct input_dev *input_get_device(struct input_dev *dev)
+{
+ return to_input_dev(class_device_get(&dev->cdev));
+}
+
+static inline void input_put_device(struct input_dev *dev)
+{
+ class_device_put(&dev->cdev);
+}
+
void input_register_device(struct input_dev *);
void input_unregister_device(struct input_dev *);
@@ -1052,7 +1075,7 @@
dev->absbit[LONG(axis)] |= BIT(axis);
}
-extern struct class *input_class;
+extern struct class input_class;
#endif
#endif
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index ff853b3..be197eb 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -69,7 +69,7 @@
#define jbd_debug(f, a...) /**/
#endif
-extern void * __jbd_kmalloc (const char *where, size_t size, int flags, int retry);
+extern void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry);
#define jbd_kmalloc(size, flags) \
__jbd_kmalloc(__FUNCTION__, (size), (flags), journal_oom_retry)
#define jbd_rep_kmalloc(size, flags) \
@@ -890,7 +890,7 @@
extern void journal_sync_buffer (struct buffer_head *);
extern int journal_invalidatepage(journal_t *,
struct page *, unsigned long);
-extern int journal_try_to_free_buffers(journal_t *, struct page *, int);
+extern int journal_try_to_free_buffers(journal_t *, struct page *, gfp_t);
extern int journal_stop(handle_t *);
extern int journal_flush (journal_t *);
extern void journal_lock_updates (journal_t *);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 4367ce4..f1925cc 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -307,7 +307,7 @@
char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */
};
-/* Force a compilation error if condition is false */
+/* Force a compilation error if condition is true */
#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
#ifdef CONFIG_SYSCTL
diff --git a/include/linux/key-ui.h b/include/linux/key-ui.h
index 7a2e332..e8b8a7a 100644
--- a/include/linux/key-ui.h
+++ b/include/linux/key-ui.h
@@ -24,7 +24,8 @@
#define KEY_WRITE 0x04 /* require permission to update / modify */
#define KEY_SEARCH 0x08 /* require permission to search (keyring) or find (key) */
#define KEY_LINK 0x10 /* require permission to link */
-#define KEY_ALL 0x1f /* all the above permissions */
+#define KEY_SETATTR 0x20 /* require permission to change attributes */
+#define KEY_ALL 0x3f /* all the above permissions */
/*
* the keyring payload contains a list of the keys to which the keyring is
diff --git a/include/linux/key.h b/include/linux/key.h
index f1efa01..53513a3 100644
--- a/include/linux/key.h
+++ b/include/linux/key.h
@@ -40,28 +40,32 @@
#define KEY_POS_WRITE 0x04000000 /* possessor can update key payload / add link to keyring */
#define KEY_POS_SEARCH 0x08000000 /* possessor can find a key in search / search a keyring */
#define KEY_POS_LINK 0x10000000 /* possessor can create a link to a key/keyring */
-#define KEY_POS_ALL 0x1f000000
+#define KEY_POS_SETATTR 0x20000000 /* possessor can set key attributes */
+#define KEY_POS_ALL 0x3f000000
#define KEY_USR_VIEW 0x00010000 /* user permissions... */
#define KEY_USR_READ 0x00020000
#define KEY_USR_WRITE 0x00040000
#define KEY_USR_SEARCH 0x00080000
#define KEY_USR_LINK 0x00100000
-#define KEY_USR_ALL 0x001f0000
+#define KEY_USR_SETATTR 0x00200000
+#define KEY_USR_ALL 0x003f0000
#define KEY_GRP_VIEW 0x00000100 /* group permissions... */
#define KEY_GRP_READ 0x00000200
#define KEY_GRP_WRITE 0x00000400
#define KEY_GRP_SEARCH 0x00000800
#define KEY_GRP_LINK 0x00001000
-#define KEY_GRP_ALL 0x00001f00
+#define KEY_GRP_SETATTR 0x00002000
+#define KEY_GRP_ALL 0x00003f00
#define KEY_OTH_VIEW 0x00000001 /* third party permissions... */
#define KEY_OTH_READ 0x00000002
#define KEY_OTH_WRITE 0x00000004
#define KEY_OTH_SEARCH 0x00000008
#define KEY_OTH_LINK 0x00000010
-#define KEY_OTH_ALL 0x0000001f
+#define KEY_OTH_SETATTR 0x00000020
+#define KEY_OTH_ALL 0x0000003f
struct seq_file;
struct user_struct;
@@ -119,6 +123,7 @@
struct key_type *type; /* type of key */
struct rw_semaphore sem; /* change vs change sem */
struct key_user *user; /* owner of this key */
+ void *security; /* security data for this key */
time_t expiry; /* time at which key expires (or 0) */
uid_t uid;
gid_t gid;
diff --git a/include/linux/kobj_map.h b/include/linux/kobj_map.h
index b6cc10b..cbe7d80 100644
--- a/include/linux/kobj_map.h
+++ b/include/linux/kobj_map.h
@@ -1,5 +1,7 @@
#ifdef __KERNEL__
+#include <asm/semaphore.h>
+
typedef struct kobject *kobj_probe_t(dev_t, int *, void *);
struct kobj_map;
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 3b22304..7f7403a 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -65,7 +65,7 @@
extern struct kobject * kobject_get(struct kobject *);
extern void kobject_put(struct kobject *);
-extern char * kobject_get_path(struct kobject *, int);
+extern char * kobject_get_path(struct kobject *, gfp_t);
struct kobj_type {
void (*release)(struct kobject *);
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 3fa7864..ebdd41f 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -70,6 +70,18 @@
int kthread_stop(struct task_struct *k);
/**
+ * kthread_stop_sem: stop a thread created by kthread_create().
+ * @k: thread created by kthread_create().
+ * @s: semaphore that @k waits on while idle.
+ *
+ * Does essentially the same thing as kthread_stop() above, but wakes
+ * @k by calling up(@s).
+ *
+ * Returns the result of threadfn(), or -EINTR if wake_up_process()
+ * was never called. */
+int kthread_stop_sem(struct task_struct *k, struct semaphore *s);
+
+/**
* kthread_should_stop: should this kthread return now?
*
* When someone calls kthread_stop on your kthread, it will be woken
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ceee1fc..0ba3af7 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -91,12 +91,13 @@
ATA_SHT_EMULATED = 1,
ATA_SHT_CMD_PER_LUN = 1,
ATA_SHT_THIS_ID = -1,
- ATA_SHT_USE_CLUSTERING = 0,
+ ATA_SHT_USE_CLUSTERING = 1,
/* struct ata_device stuff */
ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */
ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */
ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */
+ ATA_DFLAG_LBA = (1 << 3), /* device supports LBA */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -154,17 +155,28 @@
ATA_SHIFT_UDMA = 0,
ATA_SHIFT_MWDMA = 8,
ATA_SHIFT_PIO = 11,
+
+ /* Masks for port functions */
+ ATA_PORT_PRIMARY = (1 << 0),
+ ATA_PORT_SECONDARY = (1 << 1),
};
-enum pio_task_states {
- PIO_ST_UNKNOWN,
- PIO_ST_IDLE,
- PIO_ST_POLL,
- PIO_ST_TMOUT,
- PIO_ST,
- PIO_ST_LAST,
- PIO_ST_LAST_POLL,
- PIO_ST_ERR,
+enum hsm_task_states {
+ HSM_ST_UNKNOWN,
+ HSM_ST_IDLE,
+ HSM_ST_POLL,
+ HSM_ST_TMOUT,
+ HSM_ST,
+ HSM_ST_LAST,
+ HSM_ST_LAST_POLL,
+ HSM_ST_ERR,
+};
+
+enum ata_completion_errors {
+ AC_ERR_OTHER = (1 << 0),
+ AC_ERR_DEV = (1 << 1),
+ AC_ERR_ATA_BUS = (1 << 2),
+ AC_ERR_HOST_BUS = (1 << 3),
};
/* forward declarations */
@@ -174,7 +186,7 @@
struct ata_queued_cmd;
/* typedefs */
-typedef int (*ata_qc_cb_t) (struct ata_queued_cmd *qc, u8 drv_stat);
+typedef int (*ata_qc_cb_t) (struct ata_queued_cmd *qc, unsigned int err_mask);
struct ata_ioports {
unsigned long cmd_addr;
@@ -197,7 +209,7 @@
struct ata_probe_ent {
struct list_head node;
struct device *dev;
- struct ata_port_operations *port_ops;
+ const struct ata_port_operations *port_ops;
Scsi_Host_Template *sht;
struct ata_ioports port[ATA_MAX_PORTS];
unsigned int n_ports;
@@ -220,7 +232,7 @@
void __iomem *mmio_base;
unsigned int n_ports;
void *private_data;
- struct ata_port_operations *ops;
+ const struct ata_port_operations *ops;
struct ata_port * ports[0];
};
@@ -278,15 +290,18 @@
u8 xfer_mode;
unsigned int xfer_shift; /* ATA_SHIFT_xxx */
- /* cache info about current transfer mode */
- u8 xfer_protocol; /* taskfile xfer protocol */
- u8 read_cmd; /* opcode to use on read */
- u8 write_cmd; /* opcode to use on write */
+ unsigned int multi_count; /* sectors count for
+ READ/WRITE MULTIPLE */
+
+ /* for CHS addressing */
+ u16 cylinders; /* Number of cylinders */
+ u16 heads; /* Number of heads */
+ u16 sectors; /* Number of sectors per track */
};
struct ata_port {
struct Scsi_Host *host; /* our co-allocated scsi host */
- struct ata_port_operations *ops;
+ const struct ata_port_operations *ops;
unsigned long flags; /* ATA_FLAG_xxx */
unsigned int id; /* unique id req'd by scsi midlyr */
unsigned int port_no; /* unique port #; from zero */
@@ -319,7 +334,7 @@
struct work_struct packet_task;
struct work_struct pio_task;
- unsigned int pio_task_state;
+ unsigned int hsm_task_state;
unsigned long pio_task_timeout;
void *private_data;
@@ -333,13 +348,12 @@
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
- void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+ void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
- void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+ void (*exec_command)(struct ata_port *ap, const struct ata_taskfile *tf);
u8 (*check_status)(struct ata_port *ap);
u8 (*check_altstatus)(struct ata_port *ap);
- u8 (*check_err)(struct ata_port *ap);
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap);
@@ -377,9 +391,22 @@
unsigned long pio_mask;
unsigned long mwdma_mask;
unsigned long udma_mask;
- struct ata_port_operations *port_ops;
+ const struct ata_port_operations *port_ops;
};
+struct ata_timing {
+ unsigned short mode; /* ATA mode */
+ unsigned short setup; /* t1 */
+ unsigned short act8b; /* t2 for 8-bit I/O */
+ unsigned short rec8b; /* t2i for 8-bit I/O */
+ unsigned short cyc8b; /* t0 for 8-bit I/O */
+ unsigned short active; /* t2 or tD */
+ unsigned short recover; /* t2i or tK */
+ unsigned short cycle; /* t0 */
+ unsigned short udma; /* t2CYCTYP/2 */
+};
+
+#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin)
extern void ata_port_probe(struct ata_port *);
extern void __sata_phy_reset(struct ata_port *ap);
@@ -392,7 +419,7 @@
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
#endif /* CONFIG_PCI */
-extern int ata_device_add(struct ata_probe_ent *ent);
+extern int ata_device_add(const struct ata_probe_ent *ent);
extern void ata_host_set_remove(struct ata_host_set *host_set);
extern int ata_scsi_detect(Scsi_Host_Template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
@@ -400,19 +427,20 @@
extern int ata_scsi_error(struct Scsi_Host *host);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+extern int ata_ratelimit(void);
+
/*
* Default driver ops implementations
*/
-extern void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
-extern void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp);
-extern void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf);
+extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp);
+extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device);
extern void ata_std_dev_select (struct ata_port *ap, unsigned int device);
extern u8 ata_check_status(struct ata_port *ap);
extern u8 ata_altstatus(struct ata_port *ap);
-extern u8 ata_chk_err(struct ata_port *ap);
-extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
extern void ata_host_stop (struct ata_host_set *host_set);
@@ -423,8 +451,8 @@
unsigned int buflen);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem);
-extern unsigned int ata_dev_classify(struct ata_taskfile *tf);
-extern void ata_dev_id_string(u16 *id, unsigned char *s,
+extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
+extern void ata_dev_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern void ata_dev_config(struct ata_port *ap, unsigned int i);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
@@ -432,7 +460,7 @@
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
-extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat);
+extern void ata_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask);
extern void ata_eng_timeout(struct ata_port *ap);
extern void ata_scsi_simulate(u16 *id, struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *));
@@ -441,6 +469,32 @@
sector_t capacity, int geom[]);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
+/*
+ * Timing helpers
+ */
+extern int ata_timing_compute(struct ata_device *, unsigned short,
+ struct ata_timing *, int, int);
+extern void ata_timing_merge(const struct ata_timing *,
+ const struct ata_timing *, struct ata_timing *,
+ unsigned int);
+
+enum {
+ ATA_TIMING_SETUP = (1 << 0),
+ ATA_TIMING_ACT8B = (1 << 1),
+ ATA_TIMING_REC8B = (1 << 2),
+ ATA_TIMING_CYC8B = (1 << 3),
+ ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
+ ATA_TIMING_CYC8B,
+ ATA_TIMING_ACTIVE = (1 << 4),
+ ATA_TIMING_RECOVER = (1 << 5),
+ ATA_TIMING_CYCLE = (1 << 6),
+ ATA_TIMING_UDMA = (1 << 7),
+ ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
+ ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
+ ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
+ ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
+};
+
#ifdef CONFIG_PCI
struct pci_bits {
@@ -452,8 +506,8 @@
extern void ata_pci_host_stop (struct ata_host_set *host_set);
extern struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port);
-extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits);
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
+extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
#endif /* CONFIG_PCI */
@@ -463,7 +517,7 @@
return (tag < ATA_MAX_QUEUE) ? 1 : 0;
}
-static inline unsigned int ata_dev_present(struct ata_device *dev)
+static inline unsigned int ata_dev_present(const struct ata_device *dev)
{
return ((dev->class == ATA_DEV_ATA) ||
(dev->class == ATA_DEV_ATAPI));
@@ -662,11 +716,28 @@
return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0;
}
-static inline int ata_try_flush_cache(struct ata_device *dev)
+static inline int ata_try_flush_cache(const struct ata_device *dev)
{
return ata_id_wcache_enabled(dev->id) ||
ata_id_has_flush(dev->id) ||
ata_id_has_flush_ext(dev->id);
}
+static inline unsigned int ac_err_mask(u8 status)
+{
+ if (status & ATA_BUSY)
+ return AC_ERR_ATA_BUS;
+ if (status & (ATA_ERR | ATA_DF))
+ return AC_ERR_DEV;
+ return 0;
+}
+
+static inline unsigned int __ac_err_mask(u8 status)
+{
+ unsigned int mask = ac_err_mask(status);
+ if (mask == 0)
+ return AC_ERR_OTHER;
+ return mask;
+}
+
#endif /* __LINUX_LIBATA_H__ */
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 53fa515..40f63c9 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -52,7 +52,7 @@
unsigned lo_blocksize;
void *key_data;
- int old_gfp_mask;
+ gfp_t old_gfp_mask;
spinlock_t lo_lock;
struct bio *lo_bio;
diff --git a/include/linux/mbcache.h b/include/linux/mbcache.h
index 9263d2d..99e044b 100644
--- a/include/linux/mbcache.h
+++ b/include/linux/mbcache.h
@@ -22,7 +22,7 @@
};
struct mb_cache_op {
- int (*free)(struct mb_cache_entry *, int);
+ int (*free)(struct mb_cache_entry *, gfp_t);
};
/* Functions on caches */
diff --git a/include/linux/memory.h b/include/linux/memory.h
new file mode 100644
index 0000000..0def328
--- /dev/null
+++ b/include/linux/memory.h
@@ -0,0 +1,94 @@
+/*
+ * include/linux/memory.h - generic memory definition
+ *
+ * This is mainly for topological representation. We define the
+ * basic "struct memory_block" here, which can be embedded in per-arch
+ * definitions or NUMA information.
+ *
+ * Basic handling of the devices is done in drivers/base/memory.c
+ * and system devices are handled in drivers/base/sys.c.
+ *
+ * Memory block are exported via sysfs in the class/memory/devices/
+ * directory.
+ *
+ */
+#ifndef _LINUX_MEMORY_H_
+#define _LINUX_MEMORY_H_
+
+#include <linux/sysdev.h>
+#include <linux/node.h>
+#include <linux/compiler.h>
+
+#include <asm/semaphore.h>
+
+struct memory_block {
+ unsigned long phys_index;
+ unsigned long state;
+ /*
+ * This serializes all state change requests. It isn't
+ * held during creation because the control files are
+ * created long after the critical areas during
+ * initialization.
+ */
+ struct semaphore state_sem;
+ int phys_device; /* to which fru does this belong? */
+ void *hw; /* optional pointer to fw/hw data */
+ int (*phys_callback)(struct memory_block *);
+ struct sys_device sysdev;
+};
+
+/* These states are exposed to userspace as text strings in sysfs */
+#define MEM_ONLINE (1<<0) /* exposed to userspace */
+#define MEM_GOING_OFFLINE (1<<1) /* exposed to userspace */
+#define MEM_OFFLINE (1<<2) /* exposed to userspace */
+
+/*
+ * All of these states are currently kernel-internal for notifying
+ * kernel components and architectures.
+ *
+ * For MEM_MAPPING_INVALID, all notifier chains with priority >0
+ * are called before pfn_to_page() becomes invalid. The priority=0
+ * entry is reserved for the function that actually makes
+ * pfn_to_page() stop working. Any notifiers that want to be called
+ * after that should have priority <0.
+ */
+#define MEM_MAPPING_INVALID (1<<3)
+
+#ifndef CONFIG_MEMORY_HOTPLUG
+static inline int memory_dev_init(void)
+{
+ return 0;
+}
+static inline int register_memory_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+static inline void unregister_memory_notifier(struct notifier_block *nb)
+{
+}
+#else
+extern int register_memory(struct memory_block *, struct mem_section *section, struct node *);
+extern int register_new_memory(struct mem_section *);
+extern int unregister_memory_section(struct mem_section *);
+extern int memory_dev_init(void);
+extern int register_memory_notifier(struct notifier_block *nb);
+extern void unregister_memory_notifier(struct notifier_block *nb);
+
+#define CONFIG_MEM_BLOCK_SIZE (PAGES_PER_SECTION<<PAGE_SHIFT)
+
+extern int invalidate_phys_mapping(unsigned long, unsigned long);
+struct notifier_block;
+
+extern int register_memory_notifier(struct notifier_block *nb);
+extern void unregister_memory_notifier(struct notifier_block *nb);
+
+extern struct sysdev_class memory_sysdev_class;
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
+#define hotplug_memory_notifier(fn, pri) { \
+ static struct notifier_block fn##_mem_nb = \
+ { .notifier_call = fn, .priority = pri }; \
+ register_memory_notifier(&fn##_mem_nb); \
+}
+
+#endif /* _LINUX_MEMORY_H_ */
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
new file mode 100644
index 0000000..01f03bc
--- /dev/null
+++ b/include/linux/memory_hotplug.h
@@ -0,0 +1,104 @@
+#ifndef __LINUX_MEMORY_HOTPLUG_H
+#define __LINUX_MEMORY_HOTPLUG_H
+
+#include <linux/mmzone.h>
+#include <linux/spinlock.h>
+#include <linux/mmzone.h>
+#include <linux/notifier.h>
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+/*
+ * pgdat resizing functions
+ */
+static inline
+void pgdat_resize_lock(struct pglist_data *pgdat, unsigned long *flags)
+{
+ spin_lock_irqsave(&pgdat->node_size_lock, *flags);
+}
+static inline
+void pgdat_resize_unlock(struct pglist_data *pgdat, unsigned long *flags)
+{
+ spin_unlock_irqrestore(&pgdat->node_size_lock, *flags);
+}
+static inline
+void pgdat_resize_init(struct pglist_data *pgdat)
+{
+ spin_lock_init(&pgdat->node_size_lock);
+}
+/*
+ * Zone resizing functions
+ */
+static inline unsigned zone_span_seqbegin(struct zone *zone)
+{
+ return read_seqbegin(&zone->span_seqlock);
+}
+static inline int zone_span_seqretry(struct zone *zone, unsigned iv)
+{
+ return read_seqretry(&zone->span_seqlock, iv);
+}
+static inline void zone_span_writelock(struct zone *zone)
+{
+ write_seqlock(&zone->span_seqlock);
+}
+static inline void zone_span_writeunlock(struct zone *zone)
+{
+ write_sequnlock(&zone->span_seqlock);
+}
+static inline void zone_seqlock_init(struct zone *zone)
+{
+ seqlock_init(&zone->span_seqlock);
+}
+extern int zone_grow_free_lists(struct zone *zone, unsigned long new_nr_pages);
+extern int zone_grow_waitqueues(struct zone *zone, unsigned long nr_pages);
+extern int add_one_highpage(struct page *page, int pfn, int bad_ppro);
+/* need some defines for these for archs that don't support it */
+extern void online_page(struct page *page);
+/* VM interface that may be used by firmware interface */
+extern int add_memory(u64 start, u64 size);
+extern int remove_memory(u64 start, u64 size);
+extern int online_pages(unsigned long, unsigned long);
+
+/* reasonably generic interface to expand the physical pages in a zone */
+extern int __add_pages(struct zone *zone, unsigned long start_pfn,
+ unsigned long nr_pages);
+#else /* ! CONFIG_MEMORY_HOTPLUG */
+/*
+ * Stub functions for when hotplug is off
+ */
+static inline void pgdat_resize_lock(struct pglist_data *p, unsigned long *f) {}
+static inline void pgdat_resize_unlock(struct pglist_data *p, unsigned long *f) {}
+static inline void pgdat_resize_init(struct pglist_data *pgdat) {}
+
+static inline unsigned zone_span_seqbegin(struct zone *zone)
+{
+ return 0;
+}
+static inline int zone_span_seqretry(struct zone *zone, unsigned iv)
+{
+ return 0;
+}
+static inline void zone_span_writelock(struct zone *zone) {}
+static inline void zone_span_writeunlock(struct zone *zone) {}
+static inline void zone_seqlock_init(struct zone *zone) {}
+
+static inline int mhp_notimplemented(const char *func)
+{
+ printk(KERN_WARNING "%s() called, with CONFIG_MEMORY_HOTPLUG disabled\n", func);
+ dump_stack();
+ return -ENOSYS;
+}
+
+static inline int __add_pages(struct zone *zone, unsigned long start_pfn,
+ unsigned long nr_pages)
+{
+ return mhp_notimplemented(__FUNCTION__);
+}
+#endif /* ! CONFIG_MEMORY_HOTPLUG */
+static inline int __remove_pages(struct zone *zone, unsigned long start_pfn,
+ unsigned long nr_pages)
+{
+ printk(KERN_WARNING "%s() called, not yet supported\n", __FUNCTION__);
+ dump_stack();
+ return -ENOSYS;
+}
+#endif /* __LINUX_MEMORY_HOTPLUG_H */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index 58385ee..8b67cf8 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -27,10 +27,10 @@
#include <linux/config.h>
#include <linux/mmzone.h>
-#include <linux/bitmap.h>
#include <linux/slab.h>
#include <linux/rbtree.h>
#include <linux/spinlock.h>
+#include <linux/nodemask.h>
struct vm_area_struct;
@@ -47,8 +47,7 @@
* Locking policy for interlave:
* In process context there is no locking because only the process accesses
* its own state. All vma manipulation is somewhat protected by a down_read on
- * mmap_sem. For allocating in the interleave policy the page_table_lock
- * must be also aquired to protect il_next.
+ * mmap_sem.
*
* Freeing policy:
* When policy is MPOL_BIND v.zonelist is kmalloc'ed and must be kfree'd.
@@ -63,7 +62,7 @@
union {
struct zonelist *zonelist; /* bind */
short preferred_node; /* preferred */
- DECLARE_BITMAP(nodes, MAX_NUMNODES); /* interleave */
+ nodemask_t nodes; /* interleave */
/* undefined for default */
} v;
};
@@ -155,6 +154,7 @@
extern void numa_default_policy(void);
extern void numa_policy_init(void);
+extern void numa_policy_rebind(const nodemask_t *old, const nodemask_t *new);
extern struct mempolicy default_policy;
#else
@@ -227,6 +227,11 @@
{
}
+static inline void numa_policy_rebind(const nodemask_t *old,
+ const nodemask_t *new)
+{
+}
+
#endif /* CONFIG_NUMA */
#endif /* __KERNEL__ */
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 9b8d047..68f5a0f 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -158,6 +158,7 @@
extern int mii_nway_restart (struct mii_if_info *mii);
extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
+extern int mii_check_gmii_support(struct mii_if_info *mii);
extern void mii_check_link (struct mii_if_info *mii);
extern unsigned int mii_check_media (struct mii_if_info *mii,
unsigned int ok_to_print,
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 097b3a3..5c1fb0a 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -157,7 +157,7 @@
#define VM_DONTCOPY 0x00020000 /* Do not copy this vma on fork */
#define VM_DONTEXPAND 0x00040000 /* Cannot expand with mremap() */
-#define VM_RESERVED 0x00080000 /* Don't unmap it from swap_out */
+#define VM_RESERVED 0x00080000 /* Pages managed in a special way */
#define VM_ACCOUNT 0x00100000 /* Is a VM accounted object */
#define VM_HUGETLB 0x00400000 /* Huge TLB Page VM */
#define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */
@@ -226,13 +226,18 @@
* to show when page is mapped
* & limit reverse map searches.
*/
- unsigned long private; /* Mapping-private opaque data:
+ union {
+ unsigned long private; /* Mapping-private opaque data:
* usually used for buffer_heads
* if PagePrivate set; used for
* swp_entry_t if PageSwapCache
* When page is free, this indicates
* order in the buddy system.
*/
+#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+ spinlock_t ptl;
+#endif
+ } u;
struct address_space *mapping; /* If low bit clear, points to
* inode address_space, or NULL.
* If page mapped as anonymous
@@ -260,6 +265,9 @@
#endif /* WANT_PAGE_VIRTUAL */
};
+#define page_private(page) ((page)->u.private)
+#define set_page_private(page, v) ((page)->u.private = (v))
+
/*
* FIXME: take this include out, include page-flags.h in
* files which need it (119 of them)
@@ -311,17 +319,17 @@
#ifdef CONFIG_HUGETLB_PAGE
-static inline int page_count(struct page *p)
+static inline int page_count(struct page *page)
{
- if (PageCompound(p))
- p = (struct page *)p->private;
- return atomic_read(&(p)->_count) + 1;
+ if (PageCompound(page))
+ page = (struct page *)page_private(page);
+ return atomic_read(&page->_count) + 1;
}
static inline void get_page(struct page *page)
{
if (unlikely(PageCompound(page)))
- page = (struct page *)page->private;
+ page = (struct page *)page_private(page);
atomic_inc(&page->_count);
}
@@ -338,7 +346,7 @@
static inline void put_page(struct page *page)
{
- if (!PageReserved(page) && put_page_testzero(page))
+ if (put_page_testzero(page))
__page_cache_release(page);
}
@@ -587,7 +595,7 @@
static inline pgoff_t page_index(struct page *page)
{
if (unlikely(PageSwapCache(page)))
- return page->private;
+ return page_private(page);
return page->index;
}
@@ -682,7 +690,7 @@
unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
unsigned long size, struct zap_details *);
-unsigned long unmap_vmas(struct mmu_gather **tlb, struct mm_struct *mm,
+unsigned long unmap_vmas(struct mmu_gather **tlb,
struct vm_area_struct *start_vma, unsigned long start_addr,
unsigned long end_addr, unsigned long *nr_accounted,
struct zap_details *);
@@ -704,10 +712,6 @@
}
extern int vmtruncate(struct inode * inode, loff_t offset);
-extern pud_t *FASTCALL(__pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address));
-extern pmd_t *FASTCALL(__pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address));
-extern pte_t *FASTCALL(pte_alloc_kernel(struct mm_struct *mm, pmd_t *pmd, unsigned long address));
-extern pte_t *FASTCALL(pte_alloc_map(struct mm_struct *mm, pmd_t *pmd, unsigned long address));
extern int install_page(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long addr, struct page *page, pgprot_t prot);
extern int install_file_pte(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long addr, unsigned long pgoff, pgprot_t prot);
extern int __handle_mm_fault(struct mm_struct *mm,struct vm_area_struct *vma, unsigned long address, int write_access);
@@ -723,6 +727,7 @@
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start,
int len, int write, int force, struct page **pages, struct vm_area_struct **vmas);
+void print_bad_pte(struct vm_area_struct *, pte_t, unsigned long);
int __set_page_dirty_buffers(struct page *page);
int __set_page_dirty_nobuffers(struct page *page);
@@ -747,7 +752,7 @@
* The callback will be passed nr_to_scan == 0 when the VM is querying the
* cache size, so a fastpath for that case is appropriate.
*/
-typedef int (*shrinker_t)(int nr_to_scan, unsigned int gfp_mask);
+typedef int (*shrinker_t)(int nr_to_scan, gfp_t gfp_mask);
/*
* Add an aging callback. The int is the number of 'seeks' it takes
@@ -759,38 +764,83 @@
extern struct shrinker *set_shrinker(int, shrinker_t);
extern void remove_shrinker(struct shrinker *shrinker);
-/*
- * On a two-level or three-level page table, this ends up being trivial. Thus
- * the inlining and the symmetry break with pte_alloc_map() that does all
- * of this out-of-line.
- */
+int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address);
+int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
+int __pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address);
+int __pte_alloc_kernel(pmd_t *pmd, unsigned long address);
+
/*
* The following ifdef needed to get the 4level-fixup.h header to work.
* Remove it when 4level-fixup.h has been removed.
*/
-#ifdef CONFIG_MMU
-#ifndef __ARCH_HAS_4LEVEL_HACK
+#if defined(CONFIG_MMU) && !defined(__ARCH_HAS_4LEVEL_HACK)
static inline pud_t *pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
{
- if (pgd_none(*pgd))
- return __pud_alloc(mm, pgd, address);
- return pud_offset(pgd, address);
+ return (unlikely(pgd_none(*pgd)) && __pud_alloc(mm, pgd, address))?
+ NULL: pud_offset(pgd, address);
}
static inline pmd_t *pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
{
- if (pud_none(*pud))
- return __pmd_alloc(mm, pud, address);
- return pmd_offset(pud, address);
+ return (unlikely(pud_none(*pud)) && __pmd_alloc(mm, pud, address))?
+ NULL: pmd_offset(pud, address);
}
-#endif
-#endif /* CONFIG_MMU */
+#endif /* CONFIG_MMU && !__ARCH_HAS_4LEVEL_HACK */
+
+#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+/*
+ * We tuck a spinlock to guard each pagetable page into its struct page,
+ * at page->private, with BUILD_BUG_ON to make sure that this will not
+ * overflow into the next struct page (as it might with DEBUG_SPINLOCK).
+ * When freeing, reset page->mapping so free_pages_check won't complain.
+ */
+#define __pte_lockptr(page) &((page)->u.ptl)
+#define pte_lock_init(_page) do { \
+ spin_lock_init(__pte_lockptr(_page)); \
+} while (0)
+#define pte_lock_deinit(page) ((page)->mapping = NULL)
+#define pte_lockptr(mm, pmd) ({(void)(mm); __pte_lockptr(pmd_page(*(pmd)));})
+#else
+/*
+ * We use mm->page_table_lock to guard all pagetable pages of the mm.
+ */
+#define pte_lock_init(page) do {} while (0)
+#define pte_lock_deinit(page) do {} while (0)
+#define pte_lockptr(mm, pmd) ({(void)(pmd); &(mm)->page_table_lock;})
+#endif /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+
+#define pte_offset_map_lock(mm, pmd, address, ptlp) \
+({ \
+ spinlock_t *__ptl = pte_lockptr(mm, pmd); \
+ pte_t *__pte = pte_offset_map(pmd, address); \
+ *(ptlp) = __ptl; \
+ spin_lock(__ptl); \
+ __pte; \
+})
+
+#define pte_unmap_unlock(pte, ptl) do { \
+ spin_unlock(ptl); \
+ pte_unmap(pte); \
+} while (0)
+
+#define pte_alloc_map(mm, pmd, address) \
+ ((unlikely(!pmd_present(*(pmd))) && __pte_alloc(mm, pmd, address))? \
+ NULL: pte_offset_map(pmd, address))
+
+#define pte_alloc_map_lock(mm, pmd, address, ptlp) \
+ ((unlikely(!pmd_present(*(pmd))) && __pte_alloc(mm, pmd, address))? \
+ NULL: pte_offset_map_lock(mm, pmd, address, ptlp))
+
+#define pte_alloc_kernel(pmd, address) \
+ ((unlikely(!pmd_present(*(pmd))) && __pte_alloc_kernel(pmd, address))? \
+ NULL: pte_offset_kernel(pmd, address))
extern void free_area_init(unsigned long * zones_size);
extern void free_area_init_node(int nid, pg_data_t *pgdat,
unsigned long * zones_size, unsigned long zone_start_pfn,
unsigned long *zholes_size);
extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long);
+extern void setup_per_zone_pages_min(void);
extern void mem_init(void);
extern void show_mem(void);
extern void si_meminfo(struct sysinfo * val);
@@ -834,6 +884,7 @@
extern int insert_vm_struct(struct mm_struct *, struct vm_area_struct *);
extern void __vma_link_rb(struct mm_struct *, struct vm_area_struct *,
struct rb_node **, struct rb_node *);
+extern void unlink_file_vma(struct vm_area_struct *);
extern struct vm_area_struct *copy_vma(struct vm_area_struct **,
unsigned long addr, unsigned long len, pgoff_t pgoff);
extern void exit_mmap(struct mm_struct *);
@@ -894,7 +945,8 @@
unsigned long max_sane_readahead(unsigned long nr);
/* Do stack extension */
-extern int expand_stack(struct vm_area_struct * vma, unsigned long address);
+extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
+extern int expand_upwards(struct vm_area_struct *vma, unsigned long address);
/* Look up the first VMA which satisfies addr < vm_end, NULL if none. */
extern struct vm_area_struct * find_vma(struct mm_struct * mm, unsigned long addr);
@@ -917,40 +969,28 @@
return (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
}
-extern struct vm_area_struct *find_extend_vma(struct mm_struct *mm, unsigned long addr);
+struct vm_area_struct *find_extend_vma(struct mm_struct *, unsigned long addr);
+struct page *vmalloc_to_page(void *addr);
+unsigned long vmalloc_to_pfn(void *addr);
+int remap_pfn_range(struct vm_area_struct *, unsigned long addr,
+ unsigned long pfn, unsigned long size, pgprot_t);
-extern struct page * vmalloc_to_page(void *addr);
-extern unsigned long vmalloc_to_pfn(void *addr);
-extern struct page * follow_page(struct mm_struct *mm, unsigned long address,
- int write);
-extern int check_user_page_readable(struct mm_struct *mm, unsigned long address);
-int remap_pfn_range(struct vm_area_struct *, unsigned long,
- unsigned long, unsigned long, pgprot_t);
+struct page *follow_page(struct mm_struct *, unsigned long address,
+ unsigned int foll_flags);
+#define FOLL_WRITE 0x01 /* check pte is writable */
+#define FOLL_TOUCH 0x02 /* mark page accessed */
+#define FOLL_GET 0x04 /* do get_page on page */
+#define FOLL_ANON 0x08 /* give ZERO_PAGE if no pgtable */
#ifdef CONFIG_PROC_FS
-void __vm_stat_account(struct mm_struct *, unsigned long, struct file *, long);
+void vm_stat_account(struct mm_struct *, unsigned long, struct file *, long);
#else
-static inline void __vm_stat_account(struct mm_struct *mm,
+static inline void vm_stat_account(struct mm_struct *mm,
unsigned long flags, struct file *file, long pages)
{
}
#endif /* CONFIG_PROC_FS */
-static inline void vm_stat_account(struct vm_area_struct *vma)
-{
- __vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
- vma_pages(vma));
-}
-
-static inline void vm_stat_unaccount(struct vm_area_struct *vma)
-{
- __vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
- -vma_pages(vma));
-}
-
-/* update per process rss and vm hiwater data */
-extern void update_mem_hiwater(struct task_struct *tsk);
-
#ifndef CONFIG_DEBUG_PAGEALLOC
static inline void
kernel_map_pages(struct page *page, int numpages, int enable)
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 1ab78e8..aef6042 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -50,7 +50,7 @@
#define MMC_ERR_INVALID 5
struct mmc_data *data; /* data segment associated with cmd */
- struct mmc_request *mrq; /* assoicated request */
+ struct mmc_request *mrq; /* associated request */
};
struct mmc_data {
@@ -68,7 +68,7 @@
unsigned int bytes_xfered;
struct mmc_command *stop; /* stop command */
- struct mmc_request *mrq; /* assoicated request */
+ struct mmc_request *mrq; /* associated request */
unsigned int sg_len; /* size of scatter list */
struct scatterlist *sg; /* I/O scatter list */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 5ed471b..f5fa308 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -12,6 +12,7 @@
#include <linux/threads.h>
#include <linux/numa.h>
#include <linux/init.h>
+#include <linux/seqlock.h>
#include <asm/atomic.h>
/* Free memory management - zoned buddy allocator. */
@@ -137,6 +138,10 @@
* free areas of different sizes
*/
spinlock_t lock;
+#ifdef CONFIG_MEMORY_HOTPLUG
+ /* see spanned/present_pages for more description */
+ seqlock_t span_seqlock;
+#endif
struct free_area free_area[MAX_ORDER];
@@ -220,6 +225,16 @@
/* zone_start_pfn == zone_start_paddr >> PAGE_SHIFT */
unsigned long zone_start_pfn;
+ /*
+ * zone_start_pfn, spanned_pages and present_pages are all
+ * protected by span_seqlock. It is a seqlock because it has
+ * to be read outside of zone->lock, and it is done in the main
+ * allocator path. But, it is written quite infrequently.
+ *
+ * The lock is declared along with zone->lock because it is
+ * frequently read in proximity to zone->lock. It's good to
+ * give them a chance of being in the same cacheline.
+ */
unsigned long spanned_pages; /* total size, including holes */
unsigned long present_pages; /* amount of memory (excluding holes) */
@@ -273,6 +288,16 @@
struct page *node_mem_map;
#endif
struct bootmem_data *bdata;
+#ifdef CONFIG_MEMORY_HOTPLUG
+ /*
+ * Must be held any time you expect node_start_pfn, node_present_pages
+ * or node_spanned_pages stay constant. Holding this will also
+ * guarantee that any pfn_valid() stays that way.
+ *
+ * Nests above zone->lock and zone->size_seqlock.
+ */
+ spinlock_t node_size_lock;
+#endif
unsigned long node_start_pfn;
unsigned long node_present_pages; /* total number of physical pages */
unsigned long node_spanned_pages; /* total size of physical page
@@ -293,6 +318,8 @@
#endif
#define nid_page_nr(nid, pagenr) pgdat_page_nr(NODE_DATA(nid),(pagenr))
+#include <linux/memory_hotplug.h>
+
extern struct pglist_data *pgdat_list;
void __get_zone_counts(unsigned long *active, unsigned long *inactive,
@@ -302,7 +329,7 @@
void build_all_zonelists(void);
void wakeup_kswapd(struct zone *zone, int order);
int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
- int alloc_type, int can_try_harder, int gfp_high);
+ int alloc_type, int can_try_harder, gfp_t gfp_high);
#ifdef CONFIG_HAVE_MEMORY_PRESENT
void memory_present(int nid, unsigned long start, unsigned long end);
@@ -509,6 +536,7 @@
return NULL;
return &mem_section[SECTION_NR_TO_ROOT(nr)][nr & SECTION_ROOT_MASK];
}
+extern int __section_nr(struct mem_section* ms);
/*
* We use the lower bits of the mem_map pointer to store
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 2f0299a..7b08c11 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -244,4 +244,9 @@
#define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200
#define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400
+/* I2C */
+struct i2c_device_id {
+ __u16 id;
+};
+
#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/module.h b/include/linux/module.h
index f05372b..84d75f3 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -554,7 +554,9 @@
#ifdef MODULE
/* DEPRECATED: Do not use. */
#define MODULE_PARM(var,type) \
-struct obsolete_modparm __parm_##var __attribute__((section("__obsparm"))) = \
+extern struct obsolete_modparm __parm_##var \
+__attribute__((section("__obsparm"))); \
+struct obsolete_modparm __parm_##var = \
{ __stringify(var), type, &MODULE_PARM_ }; \
__MODULE_PARM_TYPE(var, type);
#else
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 9a3d272..941da5c 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -282,6 +282,17 @@
MSDOS_I(inode)->i_attrs;
}
+static inline unsigned char fat_checksum(const __u8 *name)
+{
+ unsigned char s = name[0];
+ s = (s<<7) + (s>>1) + name[1]; s = (s<<7) + (s>>1) + name[2];
+ s = (s<<7) + (s>>1) + name[3]; s = (s<<7) + (s>>1) + name[4];
+ s = (s<<7) + (s>>1) + name[5]; s = (s<<7) + (s>>1) + name[6];
+ s = (s<<7) + (s>>1) + name[7]; s = (s<<7) + (s>>1) + name[8];
+ s = (s<<7) + (s>>1) + name[9]; s = (s<<7) + (s>>1) + name[10];
+ return s;
+}
+
static inline sector_t fat_clus_to_blknr(struct msdos_sb_info *sbi, int clus)
{
return ((sector_t)clus - FAT_START_ENT) * sbi->sec_per_clus
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 142963f..fc28841 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -8,7 +8,10 @@
#include <linux/config.h>
#include <linux/types.h>
#include <linux/list.h>
+#include <linux/string.h>
+
#include <linux/mtd/compatmac.h>
+
#include <asm/unaligned.h>
#include <asm/system.h>
#include <asm/io.h>
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 7db67b0..1c975d0 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -8,6 +8,7 @@
struct open_intent {
int flags;
int create_mode;
+ struct file *file;
};
enum { MAX_NESTED_LINKS = 5 };
@@ -65,6 +66,13 @@
extern void path_release(struct nameidata *);
extern void path_release_on_umount(struct nameidata *);
+extern int __user_path_lookup_open(const char __user *, unsigned lookup_flags, struct nameidata *nd, int open_flags);
+extern int path_lookup_open(const char *, unsigned lookup_flags, struct nameidata *, int open_flags);
+extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
+ int (*open)(struct inode *, struct file *));
+extern struct file *nameidata_to_filp(struct nameidata *nd, int flags);
+extern void release_open_intent(struct nameidata *);
+
extern struct dentry * lookup_one_len(const char *, struct dentry *, int);
extern struct dentry * lookup_hash(struct qstr *, struct dentry *);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 368e4c8..c6efce4 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -308,6 +308,7 @@
#define NETIF_F_VLAN_CHALLENGED 1024 /* Device cannot handle VLAN packets */
#define NETIF_F_TSO 2048 /* Can offload TCP/IP segmentation */
#define NETIF_F_LLTX 4096 /* LockLess TX */
+#define NETIF_F_UFO 8192 /* Can offload UDP Large Send*/
struct net_device *next_sched;
@@ -873,11 +874,9 @@
static inline void netif_poll_disable(struct net_device *dev)
{
- while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) {
+ while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state))
/* No hurry. */
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(1);
- }
+ schedule_timeout_interruptible(1);
}
static inline void netif_poll_enable(struct net_device *dev)
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 9a6047f..325fe7a 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -41,6 +41,10 @@
#define NFS_MAX_FILE_IO_BUFFER_SIZE 32768
#define NFS_DEF_FILE_IO_BUFFER_SIZE 4096
+/* Default timeout values */
+#define NFS_MAX_UDP_TIMEOUT (60*HZ)
+#define NFS_MAX_TCP_TIMEOUT (600*HZ)
+
/*
* superblock magic number for NFS
*/
@@ -137,6 +141,7 @@
unsigned long attrtimeo_timestamp;
__u64 change_attr; /* v4 only */
+ unsigned long last_updated;
/* "Generation counter" for the attribute cache. This is
* bumped whenever we update the metadata on the
* server.
@@ -236,13 +241,17 @@
return atomic_read(&NFS_I(inode)->data_updates) != 0;
}
+static inline void nfs_mark_for_revalidate(struct inode *inode)
+{
+ spin_lock(&inode->i_lock);
+ NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS;
+ spin_unlock(&inode->i_lock);
+}
+
static inline void NFS_CACHEINV(struct inode *inode)
{
- if (!nfs_caches_unstable(inode)) {
- spin_lock(&inode->i_lock);
- NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS;
- spin_unlock(&inode->i_lock);
- }
+ if (!nfs_caches_unstable(inode))
+ nfs_mark_for_revalidate(inode);
}
static inline int nfs_server_capable(struct inode *inode, int cap)
@@ -276,7 +285,7 @@
static inline int nfs_verify_change_attribute(struct inode *inode, unsigned long chattr)
{
return !nfs_caches_unstable(inode)
- && chattr == NFS_I(inode)->cache_change_attribute;
+ && time_after_eq(chattr, NFS_I(inode)->cache_change_attribute);
}
/*
@@ -286,6 +295,7 @@
extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *,
struct nfs_fattr *);
extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
+extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr);
extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
extern int nfs_permission(struct inode *, int, struct nameidata *);
extern int nfs_access_get_cached(struct inode *, struct rpc_cred *, struct nfs_access_entry *);
@@ -312,6 +322,12 @@
/* linux/net/ipv4/ipconfig.c: trims ip addr off front of name, too. */
extern u32 root_nfs_parse_addr(char *name); /*__init*/
+static inline void nfs_fattr_init(struct nfs_fattr *fattr)
+{
+ fattr->valid = 0;
+ fattr->time_start = jiffies;
+}
+
/*
* linux/fs/nfs/file.c
*/
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index a2bf691..4071866 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -41,7 +41,7 @@
__u32 bitmap[2]; /* NFSv4 returned attribute bitmap */
__u64 change_attr; /* NFSv4 change attribute */
__u64 pre_change_attr;/* pre-op NFSv4 change attribute */
- unsigned long timestamp;
+ unsigned long time_start;
};
#define NFS_ATTR_WCC 0x0001 /* pre-op WCC data */
@@ -96,12 +96,13 @@
u64 after;
};
+struct nfs_seqid;
/*
* Arguments to the open call.
*/
struct nfs_openargs {
const struct nfs_fh * fh;
- __u32 seqid;
+ struct nfs_seqid * seqid;
int open_flags;
__u64 clientid;
__u32 id;
@@ -123,6 +124,7 @@
struct nfs4_change_info cinfo;
__u32 rflags;
struct nfs_fattr * f_attr;
+ struct nfs_fattr * dir_attr;
const struct nfs_server *server;
int delegation_type;
nfs4_stateid delegation;
@@ -136,7 +138,7 @@
struct nfs_open_confirmargs {
const struct nfs_fh * fh;
nfs4_stateid stateid;
- __u32 seqid;
+ struct nfs_seqid * seqid;
};
struct nfs_open_confirmres {
@@ -148,13 +150,16 @@
*/
struct nfs_closeargs {
struct nfs_fh * fh;
- nfs4_stateid stateid;
- __u32 seqid;
+ nfs4_stateid * stateid;
+ struct nfs_seqid * seqid;
int open_flags;
+ const u32 * bitmask;
};
struct nfs_closeres {
nfs4_stateid stateid;
+ struct nfs_fattr * fattr;
+ const struct nfs_server *server;
};
/*
* * Arguments to the lock,lockt, and locku call.
@@ -164,30 +169,19 @@
u32 id;
};
-struct nfs_open_to_lock {
- __u32 open_seqid;
- nfs4_stateid open_stateid;
- __u32 lock_seqid;
- struct nfs_lowner lock_owner;
-};
-
-struct nfs_exist_lock {
- nfs4_stateid stateid;
- __u32 seqid;
-};
-
struct nfs_lock_opargs {
+ struct nfs_seqid * lock_seqid;
+ nfs4_stateid * lock_stateid;
+ struct nfs_seqid * open_seqid;
+ nfs4_stateid * open_stateid;
+ struct nfs_lowner lock_owner;
__u32 reclaim;
__u32 new_lock_owner;
- union {
- struct nfs_open_to_lock *open_lock;
- struct nfs_exist_lock *exist_lock;
- } u;
};
struct nfs_locku_opargs {
- __u32 seqid;
- nfs4_stateid stateid;
+ struct nfs_seqid * seqid;
+ nfs4_stateid * stateid;
};
struct nfs_lockargs {
@@ -262,6 +256,7 @@
enum nfs3_stable_how stable;
unsigned int pgbase;
struct page ** pages;
+ const u32 * bitmask;
};
struct nfs_writeverf {
@@ -273,6 +268,7 @@
struct nfs_fattr * fattr;
struct nfs_writeverf * verf;
__u32 count;
+ const struct nfs_server *server;
};
/*
@@ -550,6 +546,7 @@
struct nfs_fh * fh;
struct nfs_fattr * fattr;
struct nfs4_change_info dir_cinfo;
+ struct nfs_fattr * dir_fattr;
};
struct nfs4_fsinfo_arg {
@@ -571,8 +568,17 @@
const struct nfs_fh * fh;
const struct nfs_fh * dir_fh;
const struct qstr * name;
+ const u32 * bitmask;
};
+struct nfs4_link_res {
+ const struct nfs_server * server;
+ struct nfs_fattr * fattr;
+ struct nfs4_change_info cinfo;
+ struct nfs_fattr * dir_attr;
+};
+
+
struct nfs4_lookup_arg {
const struct nfs_fh * dir_fh;
const struct qstr * name;
@@ -619,6 +625,13 @@
struct nfs4_remove_arg {
const struct nfs_fh * fh;
const struct qstr * name;
+ const u32 * bitmask;
+};
+
+struct nfs4_remove_res {
+ const struct nfs_server * server;
+ struct nfs4_change_info cinfo;
+ struct nfs_fattr * dir_attr;
};
struct nfs4_rename_arg {
@@ -626,11 +639,15 @@
const struct nfs_fh * new_dir;
const struct qstr * old_name;
const struct qstr * new_name;
+ const u32 * bitmask;
};
struct nfs4_rename_res {
+ const struct nfs_server * server;
struct nfs4_change_info old_cinfo;
+ struct nfs_fattr * old_fattr;
struct nfs4_change_info new_cinfo;
+ struct nfs_fattr * new_fattr;
};
struct nfs4_setclientid {
@@ -722,7 +739,7 @@
int (*write) (struct nfs_write_data *);
int (*commit) (struct nfs_write_data *);
int (*create) (struct inode *, struct dentry *,
- struct iattr *, int);
+ struct iattr *, int, struct nameidata *);
int (*remove) (struct inode *, struct qstr *);
int (*unlink_setup) (struct rpc_message *,
struct dentry *, struct qstr *);
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index e96fe90..4726ef7 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -12,6 +12,8 @@
* see bitmap_scnprintf() and bitmap_parse() in lib/bitmap.c.
* For details of nodelist_scnprintf() and nodelist_parse(), see
* bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c.
+ * For details of node_remap(), see bitmap_bitremap in lib/bitmap.c.
+ * For details of nodes_remap(), see bitmap_remap in lib/bitmap.c.
*
* The available nodemask operations are:
*
@@ -52,6 +54,8 @@
* int nodemask_parse(ubuf, ulen, mask) Parse ascii string as nodemask
* int nodelist_scnprintf(buf, len, mask) Format nodemask as list for printing
* int nodelist_parse(buf, map) Parse ascii string as nodelist
+ * int node_remap(oldbit, old, new) newbit = map(old, new)(oldbit)
+ * int nodes_remap(dst, src, old, new) *dst = map(old, new)(dst)
*
* for_each_node_mask(node, mask) for-loop node over mask
*
@@ -307,6 +311,22 @@
return bitmap_parselist(buf, dstp->bits, nbits);
}
+#define node_remap(oldbit, old, new) \
+ __node_remap((oldbit), &(old), &(new), MAX_NUMNODES)
+static inline int __node_remap(int oldbit,
+ const nodemask_t *oldp, const nodemask_t *newp, int nbits)
+{
+ return bitmap_bitremap(oldbit, oldp->bits, newp->bits, nbits);
+}
+
+#define nodes_remap(dst, src, old, new) \
+ __nodes_remap(&(dst), &(src), &(old), &(new), MAX_NUMNODES)
+static inline void __nodes_remap(nodemask_t *dstp, const nodemask_t *srcp,
+ const nodemask_t *oldp, const nodemask_t *newp, int nbits)
+{
+ bitmap_remap(dstp->bits, srcp->bits, oldp->bits, newp->bits, nbits);
+}
+
#if MAX_NUMNODES > 1
#define for_each_node_mask(node, mask) \
for ((node) = first_node(mask); \
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index acbf31c..ba6c310 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -21,16 +21,17 @@
static inline gfp_t mapping_gfp_mask(struct address_space * mapping)
{
- return mapping->flags & __GFP_BITS_MASK;
+ return (__force gfp_t)mapping->flags & __GFP_BITS_MASK;
}
/*
* This is non-atomic. Only to be used before the mapping is activated.
* Probably needs a barrier...
*/
-static inline void mapping_set_gfp_mask(struct address_space *m, int mask)
+static inline void mapping_set_gfp_mask(struct address_space *m, gfp_t mask)
{
- m->flags = (m->flags & ~__GFP_BITS_MASK) | mask;
+ m->flags = (m->flags & ~(__force unsigned long)__GFP_BITS_MASK) |
+ (__force unsigned long)mask;
}
/*
@@ -69,7 +70,7 @@
extern struct page * find_trylock_page(struct address_space *mapping,
unsigned long index);
extern struct page * find_or_create_page(struct address_space *mapping,
- unsigned long index, unsigned int gfp_mask);
+ unsigned long index, gfp_t gfp_mask);
unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
unsigned int nr_pages, struct page **pages);
unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index,
@@ -92,9 +93,9 @@
struct list_head *pages, filler_t *filler, void *data);
int add_to_page_cache(struct page *page, struct address_space *mapping,
- unsigned long index, int gfp_mask);
+ unsigned long index, gfp_t gfp_mask);
int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
- unsigned long index, int gfp_mask);
+ unsigned long index, gfp_t gfp_mask);
extern void remove_from_page_cache(struct page *page);
extern void __remove_from_page_cache(struct page *page);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 7349058..3596ac9 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -132,6 +132,7 @@
unsigned int is_enabled:1; /* pci_enable_device has been called */
unsigned int is_busmaster:1; /* device is busmaster */
unsigned int no_msi:1; /* device may not use msi */
+ unsigned int block_ucfg_access:1; /* userspace config space access is blocked */
u32 saved_config_space[16]; /* config space saved at suspend time */
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
@@ -490,6 +491,9 @@
extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
#endif
+extern void pci_block_user_cfg_access(struct pci_dev *dev);
+extern void pci_unblock_user_cfg_access(struct pci_dev *dev);
+
/*
* PCI domain support. Sometimes called PCI segment (eg by ACPI),
* a PCI domain is defined to be a set of PCI busses which share
@@ -560,6 +564,9 @@
#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
+static inline void pci_block_user_cfg_access(struct pci_dev *dev) { }
+static inline void pci_unblock_user_cfg_access(struct pci_dev *dev) { }
+
#endif /* CONFIG_PCI */
/* Include architecture-dependent settings and functions */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 71834f0..5619200 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -96,6 +96,9 @@
#define PCI_CLASS_SERIAL_ACCESS 0x0c01
#define PCI_CLASS_SERIAL_SSA 0x0c02
#define PCI_CLASS_SERIAL_USB 0x0c03
+#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300
+#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310
+#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320
#define PCI_CLASS_SERIAL_FIBER 0x0c04
#define PCI_CLASS_SERIAL_SMBUS 0x0c05
@@ -132,9 +135,6 @@
#define PCI_VENDOR_ID_COMPAQ 0x0e11
#define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508
-#define PCI_DEVICE_ID_COMPAQ_1280 0x3033
-#define PCI_DEVICE_ID_COMPAQ_TRIFLEX 0x4000
-#define PCI_DEVICE_ID_COMPAQ_6010 0x6010
#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc
#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10
#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32
@@ -274,7 +274,6 @@
#define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050
#define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051
#define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052
-#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452
#define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053
#define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054
#define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055
@@ -282,8 +281,6 @@
#define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057
#define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058
/* Rage128 M4 */
-#define PCI_DEVICE_ID_ATI_RADEON_LE 0x4d45
-#define PCI_DEVICE_ID_ATI_RADEON_LF 0x4d46
/* Radeon R100 */
#define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144
#define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145
@@ -304,32 +301,22 @@
#define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157
#define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158
/* Radeon NV-100 */
-#define PCI_DEVICE_ID_ATI_RADEON_N1 0x5159
-#define PCI_DEVICE_ID_ATI_RADEON_N2 0x515a
/* Radeon RV250 (9000) */
#define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964
#define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965
#define PCI_DEVICE_ID_ATI_RADEON_If 0x4966
#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967
/* Radeon RV280 (9200) */
-#define PCI_DEVICE_ID_ATI_RADEON_Y_ 0x5960
#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961
#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964
/* Radeon R300 (9500) */
-#define PCI_DEVICE_ID_ATI_RADEON_AD 0x4144
/* Radeon R300 (9700) */
#define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44
#define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45
#define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46
#define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47
-#define PCI_DEVICE_ID_ATI_RADEON_AE 0x4145
-#define PCI_DEVICE_ID_ATI_RADEON_AF 0x4146
/* Radeon R350 (9800) */
-#define PCI_DEVICE_ID_ATI_RADEON_NH 0x4e48
-#define PCI_DEVICE_ID_ATI_RADEON_NI 0x4e49
/* Radeon RV350 (9600) */
-#define PCI_DEVICE_ID_ATI_RADEON_AP 0x4150
-#define PCI_DEVICE_ID_ATI_RADEON_AR 0x4152
/* Radeon M6 */
#define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59
#define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a
@@ -342,10 +329,6 @@
#define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66
#define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67
/* Radeon */
-#define PCI_DEVICE_ID_ATI_RADEON_RA 0x5144
-#define PCI_DEVICE_ID_ATI_RADEON_RB 0x5145
-#define PCI_DEVICE_ID_ATI_RADEON_RC 0x5146
-#define PCI_DEVICE_ID_ATI_RADEON_RD 0x5147
/* RadeonIGP */
#define PCI_DEVICE_ID_ATI_RS100 0xcab0
#define PCI_DEVICE_ID_ATI_RS200 0xcab2
@@ -446,45 +429,28 @@
#define PCI_DEVICE_ID_CIRRUS_5465 0x00d6
#define PCI_DEVICE_ID_CIRRUS_6729 0x1100
#define PCI_DEVICE_ID_CIRRUS_6832 0x1110
-#define PCI_DEVICE_ID_CIRRUS_7542 0x1200
#define PCI_DEVICE_ID_CIRRUS_7543 0x1202
-#define PCI_DEVICE_ID_CIRRUS_7541 0x1204
#define PCI_DEVICE_ID_CIRRUS_4610 0x6001
#define PCI_DEVICE_ID_CIRRUS_4612 0x6003
#define PCI_DEVICE_ID_CIRRUS_4615 0x6004
-#define PCI_DEVICE_ID_CIRRUS_4281 0x6005
#define PCI_VENDOR_ID_IBM 0x1014
-#define PCI_DEVICE_ID_IBM_FIRE_CORAL 0x000a
#define PCI_DEVICE_ID_IBM_TR 0x0018
-#define PCI_DEVICE_ID_IBM_82G2675 0x001d
-#define PCI_DEVICE_ID_IBM_MCA 0x0020
-#define PCI_DEVICE_ID_IBM_82351 0x0022
-#define PCI_DEVICE_ID_IBM_PYTHON 0x002d
-#define PCI_DEVICE_ID_IBM_SERVERAID 0x002e
#define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e
-#define PCI_DEVICE_ID_IBM_MPIC 0x0046
-#define PCI_DEVICE_ID_IBM_3780IDSP 0x007d
-#define PCI_DEVICE_ID_IBM_CHUKAR 0x0096
#define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc
-#define PCI_DEVICE_ID_IBM_CPC710_PCI32 0x0105
-#define PCI_DEVICE_ID_IBM_405GP 0x0156
#define PCI_DEVICE_ID_IBM_SNIPE 0x0180
-#define PCI_DEVICE_ID_IBM_SERVERAIDI960 0x01bd
#define PCI_DEVICE_ID_IBM_CITRINE 0x028C
#define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166
-#define PCI_DEVICE_ID_IBM_MPIC_2 0xffff
#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031
#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219
#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A
#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251
#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252
-#define PCI_VENDOR_ID_COMPEX2 0x101a // pci.ids says "AT&T GIS (NCR)"
+#define PCI_VENDOR_ID_COMPEX2 0x101a /* pci.ids says "AT&T GIS (NCR)" */
#define PCI_DEVICE_ID_COMPEX2_100VG 0x0005
#define PCI_VENDOR_ID_WD 0x101c
-#define PCI_DEVICE_ID_WD_7197 0x3296
#define PCI_DEVICE_ID_WD_90C 0xc24a
#define PCI_VENDOR_ID_AMI 0x101e
@@ -501,33 +467,18 @@
#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006
#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007
#define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C
-#define PCI_DEVICE_ID_AMD_FE_GATE_700D 0x700D
#define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E
-#define PCI_DEVICE_ID_AMD_FE_GATE_700F 0x700F
-#define PCI_DEVICE_ID_AMD_COBRA_7400 0x7400
#define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401
-#define PCI_DEVICE_ID_AMD_COBRA_7403 0x7403
-#define PCI_DEVICE_ID_AMD_COBRA_7404 0x7404
-#define PCI_DEVICE_ID_AMD_VIPER_7408 0x7408
#define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409
#define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B
-#define PCI_DEVICE_ID_AMD_VIPER_740C 0x740C
#define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410
#define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411
#define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413
-#define PCI_DEVICE_ID_AMD_VIPER_7414 0x7414
-#define PCI_DEVICE_ID_AMD_OPUS_7440 0x7440
-# define PCI_DEVICE_ID_AMD_VIPER_7440 PCI_DEVICE_ID_AMD_OPUS_7440
+#define PCI_DEVICE_ID_AMD_VIPER_7440 0x7440
#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441
-# define PCI_DEVICE_ID_AMD_VIPER_7441 PCI_DEVICE_ID_AMD_OPUS_7441
#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443
-# define PCI_DEVICE_ID_AMD_VIPER_7443 PCI_DEVICE_ID_AMD_OPUS_7443
+#define PCI_DEVICE_ID_AMD_VIPER_7443 0x7443
#define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445
-#define PCI_DEVICE_ID_AMD_OPUS_7448 0x7448
-# define PCI_DEVICE_ID_AMD_VIPER_7448 PCI_DEVICE_ID_AMD_OPUS_7448
-#define PCI_DEVICE_ID_AMD_OPUS_7449 0x7449
-# define PCI_DEVICE_ID_AMD_VIPER_7449 PCI_DEVICE_ID_AMD_OPUS_7449
-#define PCI_DEVICE_ID_AMD_8111_LAN 0x7462
#define PCI_DEVICE_ID_AMD_8111_LPC 0x7468
#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469
#define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a
@@ -585,7 +536,6 @@
#define PCI_DEVICE_ID_CT_65550 0x00e0
#define PCI_DEVICE_ID_CT_65554 0x00e4
#define PCI_DEVICE_ID_CT_65555 0x00e5
-#define PCI_DEVICE_ID_CT_69000 0x00c0
#define PCI_VENDOR_ID_MIRO 0x1031
#define PCI_DEVICE_ID_MIRO_36050 0x5601
@@ -639,7 +589,6 @@
#define PCI_DEVICE_ID_SI_550 0x0550
#define PCI_DEVICE_ID_SI_540_VGA 0x5300
#define PCI_DEVICE_ID_SI_550_VGA 0x5315
-#define PCI_DEVICE_ID_SI_601 0x0601
#define PCI_DEVICE_ID_SI_620 0x0620
#define PCI_DEVICE_ID_SI_630 0x0630
#define PCI_DEVICE_ID_SI_633 0x0633
@@ -650,30 +599,22 @@
#define PCI_DEVICE_ID_SI_648 0x0648
#define PCI_DEVICE_ID_SI_650 0x0650
#define PCI_DEVICE_ID_SI_651 0x0651
-#define PCI_DEVICE_ID_SI_652 0x0652
#define PCI_DEVICE_ID_SI_655 0x0655
#define PCI_DEVICE_ID_SI_661 0x0661
#define PCI_DEVICE_ID_SI_730 0x0730
#define PCI_DEVICE_ID_SI_733 0x0733
#define PCI_DEVICE_ID_SI_630_VGA 0x6300
-#define PCI_DEVICE_ID_SI_730_VGA 0x7300
#define PCI_DEVICE_ID_SI_735 0x0735
#define PCI_DEVICE_ID_SI_740 0x0740
#define PCI_DEVICE_ID_SI_741 0x0741
#define PCI_DEVICE_ID_SI_745 0x0745
#define PCI_DEVICE_ID_SI_746 0x0746
-#define PCI_DEVICE_ID_SI_748 0x0748
-#define PCI_DEVICE_ID_SI_750 0x0750
-#define PCI_DEVICE_ID_SI_751 0x0751
-#define PCI_DEVICE_ID_SI_752 0x0752
#define PCI_DEVICE_ID_SI_755 0x0755
#define PCI_DEVICE_ID_SI_760 0x0760
#define PCI_DEVICE_ID_SI_900 0x0900
#define PCI_DEVICE_ID_SI_961 0x0961
#define PCI_DEVICE_ID_SI_962 0x0962
#define PCI_DEVICE_ID_SI_963 0x0963
-#define PCI_DEVICE_ID_SI_5107 0x5107
-#define PCI_DEVICE_ID_SI_5300 0x5300
#define PCI_DEVICE_ID_SI_5511 0x5511
#define PCI_DEVICE_ID_SI_5513 0x5513
#define PCI_DEVICE_ID_SI_5518 0x5518
@@ -685,10 +626,6 @@
#define PCI_DEVICE_ID_SI_5597 0x5597
#define PCI_DEVICE_ID_SI_5598 0x5598
#define PCI_DEVICE_ID_SI_5600 0x5600
-#define PCI_DEVICE_ID_SI_6300 0x6300
-#define PCI_DEVICE_ID_SI_6306 0x6306
-#define PCI_DEVICE_ID_SI_6326 0x6326
-#define PCI_DEVICE_ID_SI_7001 0x7001
#define PCI_DEVICE_ID_SI_7012 0x7012
#define PCI_DEVICE_ID_SI_7013 0x7013
#define PCI_DEVICE_ID_SI_7016 0x7016
@@ -709,14 +646,11 @@
#define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049
#define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A
#define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B
-#define PCI_DEVICE_ID_HP_PCI_LBA 0x1054
-#define PCI_DEVICE_ID_HP_REO_SBA 0x10f0
#define PCI_DEVICE_ID_HP_REO_IOC 0x10f1
#define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b
#define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223
#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226
#define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227
-#define PCI_DEVICE_ID_HP_ZX1_SBA 0x1229
#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a
#define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e
#define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c
@@ -724,9 +658,7 @@
#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290
#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301
#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a
-#define PCI_DEVICE_ID_HP_CISS 0x3210
#define PCI_DEVICE_ID_HP_CISSA 0x3220
-#define PCI_DEVICE_ID_HP_CISSB 0x3222
#define PCI_DEVICE_ID_HP_CISSC 0x3230
#define PCI_DEVICE_ID_HP_CISSD 0x3238
#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
@@ -734,8 +666,6 @@
#define PCI_VENDOR_ID_PCTECH 0x1042
#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000
#define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001
-#define PCI_DEVICE_ID_PCTECH_SAMURAI_0 0x3000
-#define PCI_DEVICE_ID_PCTECH_SAMURAI_1 0x3010
#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
#define PCI_VENDOR_ID_ASUSTEK 0x1043
@@ -745,24 +675,15 @@
#define PCI_DEVICE_ID_DPT 0xa400
#define PCI_VENDOR_ID_OPTI 0x1045
-#define PCI_DEVICE_ID_OPTI_92C178 0xc178
-#define PCI_DEVICE_ID_OPTI_82C557 0xc557
#define PCI_DEVICE_ID_OPTI_82C558 0xc558
#define PCI_DEVICE_ID_OPTI_82C621 0xc621
#define PCI_DEVICE_ID_OPTI_82C700 0xc700
-#define PCI_DEVICE_ID_OPTI_82C701 0xc701
-#define PCI_DEVICE_ID_OPTI_82C814 0xc814
-#define PCI_DEVICE_ID_OPTI_82C822 0xc822
-#define PCI_DEVICE_ID_OPTI_82C861 0xc861
#define PCI_DEVICE_ID_OPTI_82C825 0xd568
#define PCI_VENDOR_ID_ELSA 0x1048
#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000
#define PCI_DEVICE_ID_ELSA_QS3000 0x3000
-#define PCI_VENDOR_ID_SGS 0x104a
-#define PCI_DEVICE_ID_SGS_2000 0x0008
-#define PCI_DEVICE_ID_SGS_1764 0x0009
#define PCI_VENDOR_ID_BUSLOGIC 0x104B
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
@@ -770,7 +691,6 @@
#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130
#define PCI_VENDOR_ID_TI 0x104c
-#define PCI_DEVICE_ID_TI_TVP4010 0x3d04
#define PCI_DEVICE_ID_TI_TVP4020 0x3d07
#define PCI_DEVICE_ID_TI_4450 0x8011
#define PCI_DEVICE_ID_TI_XX21_XX11 0x8031
@@ -804,14 +724,10 @@
#define PCI_DEVICE_ID_TI_X420 0xac8e
#define PCI_VENDOR_ID_SONY 0x104d
-#define PCI_DEVICE_ID_SONY_CXD3222 0x8039
-#define PCI_VENDOR_ID_OAK 0x104e
-#define PCI_DEVICE_ID_OAK_OTI107 0x0107
/* Winbond have two vendor IDs! See 0x10ad as well */
#define PCI_VENDOR_ID_WINBOND2 0x1050
-#define PCI_DEVICE_ID_WINBOND2_89C940 0x0940
#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a
#define PCI_DEVICE_ID_WINBOND2_6692 0x6692
@@ -820,19 +736,15 @@
#define PCI_VENDOR_ID_EFAR 0x1055
#define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130
-#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
-#define PCI_DEVICE_ID_EFAR_SLC90E66_2 0x9462
#define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463
#define PCI_VENDOR_ID_MOTOROLA 0x1057
-#define PCI_VENDOR_ID_MOTOROLA_OOPS 0x1507
#define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001
#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002
#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004
#define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801
#define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802
#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803
-#define PCI_DEVICE_ID_MOTOROLA_CPX8216 0x4806
#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b
#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803
@@ -843,33 +755,19 @@
#define PCI_DEVICE_ID_PROMISE_20262 0x4d38
#define PCI_DEVICE_ID_PROMISE_20263 0x0D38
#define PCI_DEVICE_ID_PROMISE_20268 0x4d68
-#define PCI_DEVICE_ID_PROMISE_20268R 0x6268
#define PCI_DEVICE_ID_PROMISE_20269 0x4d69
#define PCI_DEVICE_ID_PROMISE_20270 0x6268
#define PCI_DEVICE_ID_PROMISE_20271 0x6269
#define PCI_DEVICE_ID_PROMISE_20275 0x1275
#define PCI_DEVICE_ID_PROMISE_20276 0x5275
#define PCI_DEVICE_ID_PROMISE_20277 0x7275
-#define PCI_DEVICE_ID_PROMISE_5300 0x5300
-#define PCI_VENDOR_ID_N9 0x105d
-#define PCI_DEVICE_ID_N9_I128 0x2309
-#define PCI_DEVICE_ID_N9_I128_2 0x2339
-#define PCI_DEVICE_ID_N9_I128_T2R 0x493d
#define PCI_VENDOR_ID_UMC 0x1060
#define PCI_DEVICE_ID_UMC_UM8673F 0x0101
-#define PCI_DEVICE_ID_UMC_UM8891A 0x0891
#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
#define PCI_DEVICE_ID_UMC_UM8886A 0x886a
-#define PCI_DEVICE_ID_UMC_UM8881F 0x8881
-#define PCI_DEVICE_ID_UMC_UM8886F 0x8886
-#define PCI_DEVICE_ID_UMC_UM9017F 0x9017
-#define PCI_DEVICE_ID_UMC_UM8886N 0xe886
-#define PCI_DEVICE_ID_UMC_UM8891N 0xe891
-#define PCI_VENDOR_ID_X 0x1061
-#define PCI_DEVICE_ID_X_AGX016 0x0001
#define PCI_VENDOR_ID_MYLEX 0x1069
#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
@@ -880,37 +778,26 @@
#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56
#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166
-#define PCI_VENDOR_ID_PICOP 0x1066
-#define PCI_DEVICE_ID_PICOP_PT86C52X 0x0001
-#define PCI_DEVICE_ID_PICOP_PT80C524 0x8002
#define PCI_VENDOR_ID_APPLE 0x106b
#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001
-#define PCI_DEVICE_ID_APPLE_GC 0x0002
#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e
#define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018
-#define PCI_DEVICE_ID_APPLE_KL_USB 0x0019
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020
#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021
-#define PCI_DEVICE_ID_APPLE_KEYLARGO 0x0022
#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024
-#define PCI_DEVICE_ID_APPLE_KEYLARGO_P 0x0025
-#define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d
#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e
-#define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030
#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032
#define PCI_DEVICE_ID_APPLE_UNI_N_ATA 0x0033
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034
#define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b
-#define PCI_DEVICE_ID_APPLE_KEYLARGO_I 0x003e
#define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043
#define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b
#define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c
#define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050
#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051
-#define PCI_DEVICE_ID_APPLE_SH_FW 0x0052
#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058
#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059
#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645
@@ -923,12 +810,9 @@
#define PCI_DEVICE_ID_YAMAHA_744 0x0010
#define PCI_DEVICE_ID_YAMAHA_754 0x0012
-#define PCI_VENDOR_ID_NEXGEN 0x1074
-#define PCI_DEVICE_ID_NEXGEN_82C501 0x4e78
#define PCI_VENDOR_ID_QLOGIC 0x1077
#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020
-#define PCI_DEVICE_ID_QLOGIC_ISP1022 0x1022
#define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100
#define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200
#define PCI_DEVICE_ID_QLOGIC_ISP2300 0x2300
@@ -946,32 +830,20 @@
#define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001
#define PCI_DEVICE_ID_CYRIX_5520 0x0002
#define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100
-#define PCI_DEVICE_ID_CYRIX_5530_SMI 0x0101
#define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102
#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103
#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104
-#define PCI_VENDOR_ID_LEADTEK 0x107d
-#define PCI_DEVICE_ID_LEADTEK_805 0x0000
-#define PCI_VENDOR_ID_INTERPHASE 0x107e
-#define PCI_DEVICE_ID_INTERPHASE_5526 0x0004
-#define PCI_DEVICE_ID_INTERPHASE_55x6 0x0005
-#define PCI_DEVICE_ID_INTERPHASE_5575 0x0008
#define PCI_VENDOR_ID_CONTAQ 0x1080
-#define PCI_DEVICE_ID_CONTAQ_82C599 0x0600
#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693
-#define PCI_VENDOR_ID_FOREX 0x1083
#define PCI_VENDOR_ID_OLICOM 0x108d
-#define PCI_DEVICE_ID_OLICOM_OC3136 0x0001
-#define PCI_DEVICE_ID_OLICOM_OC2315 0x0011
#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012
#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013
#define PCI_DEVICE_ID_OLICOM_OC2326 0x0014
-#define PCI_DEVICE_ID_OLICOM_OC6151 0x0021
#define PCI_VENDOR_ID_SUN 0x108e
#define PCI_DEVICE_ID_SUN_EBUS 0x1000
@@ -990,49 +862,31 @@
#define PCI_DEVICE_ID_SUN_CASSINI 0xabba
#define PCI_VENDOR_ID_CMD 0x1095
-#define PCI_DEVICE_ID_CMD_640 0x0640
#define PCI_DEVICE_ID_CMD_643 0x0643
#define PCI_DEVICE_ID_CMD_646 0x0646
-#define PCI_DEVICE_ID_CMD_647 0x0647
#define PCI_DEVICE_ID_CMD_648 0x0648
#define PCI_DEVICE_ID_CMD_649 0x0649
-#define PCI_DEVICE_ID_CMD_670 0x0670
-#define PCI_DEVICE_ID_CMD_680 0x0680
#define PCI_DEVICE_ID_SII_680 0x0680
#define PCI_DEVICE_ID_SII_3112 0x3112
#define PCI_DEVICE_ID_SII_1210SA 0x0240
-#define PCI_VENDOR_ID_VISION 0x1098
-#define PCI_DEVICE_ID_VISION_QD8500 0x0001
-#define PCI_DEVICE_ID_VISION_QD8580 0x0002
#define PCI_VENDOR_ID_BROOKTREE 0x109e
-#define PCI_DEVICE_ID_BROOKTREE_848 0x0350
-#define PCI_DEVICE_ID_BROOKTREE_849A 0x0351
-#define PCI_DEVICE_ID_BROOKTREE_878_1 0x036e
#define PCI_DEVICE_ID_BROOKTREE_878 0x0878
#define PCI_DEVICE_ID_BROOKTREE_879 0x0879
-#define PCI_DEVICE_ID_BROOKTREE_8474 0x8474
-#define PCI_VENDOR_ID_SIERRA 0x10a8
-#define PCI_DEVICE_ID_SIERRA_STB 0x0000
#define PCI_VENDOR_ID_SGI 0x10a9
#define PCI_DEVICE_ID_SGI_IOC3 0x0003
#define PCI_DEVICE_ID_SGI_IOC4 0x100a
#define PCI_VENDOR_ID_SGI_LITHIUM 0x1002
-#define PCI_VENDOR_ID_ACC 0x10aa
-#define PCI_DEVICE_ID_ACC_2056 0x0000
#define PCI_VENDOR_ID_WINBOND 0x10ad
-#define PCI_DEVICE_ID_WINBOND_83769 0x0001
#define PCI_DEVICE_ID_WINBOND_82C105 0x0105
#define PCI_DEVICE_ID_WINBOND_83C553 0x0565
-#define PCI_VENDOR_ID_DATABOOK 0x10b3
-#define PCI_DEVICE_ID_DATABOOK_87144 0xb106
#define PCI_VENDOR_ID_PLX 0x10b5
#define PCI_DEVICE_ID_PLX_R685 0x1030
@@ -1043,33 +897,19 @@
#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151
#define PCI_DEVICE_ID_PLX_R753 0x1152
#define PCI_DEVICE_ID_PLX_OLITEC 0x1187
-#define PCI_DEVICE_ID_PLX_9030 0x9030
#define PCI_DEVICE_ID_PLX_9050 0x9050
-#define PCI_DEVICE_ID_PLX_9060 0x9060
-#define PCI_DEVICE_ID_PLX_9060ES 0x906E
-#define PCI_DEVICE_ID_PLX_9060SD 0x906D
#define PCI_DEVICE_ID_PLX_9080 0x9080
#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001
#define PCI_VENDOR_ID_MADGE 0x10b6
#define PCI_DEVICE_ID_MADGE_MK2 0x0002
-#define PCI_DEVICE_ID_MADGE_C155S 0x1001
#define PCI_VENDOR_ID_3COM 0x10b7
#define PCI_DEVICE_ID_3COM_3C985 0x0001
#define PCI_DEVICE_ID_3COM_3C940 0x1700
#define PCI_DEVICE_ID_3COM_3C339 0x3390
#define PCI_DEVICE_ID_3COM_3C359 0x3590
-#define PCI_DEVICE_ID_3COM_3C590 0x5900
-#define PCI_DEVICE_ID_3COM_3C595TX 0x5950
-#define PCI_DEVICE_ID_3COM_3C595T4 0x5951
-#define PCI_DEVICE_ID_3COM_3C595MII 0x5952
#define PCI_DEVICE_ID_3COM_3C940B 0x80eb
-#define PCI_DEVICE_ID_3COM_3C900TPO 0x9000
-#define PCI_DEVICE_ID_3COM_3C900COMBO 0x9001
-#define PCI_DEVICE_ID_3COM_3C905TX 0x9050
-#define PCI_DEVICE_ID_3COM_3C905T4 0x9051
-#define PCI_DEVICE_ID_3COM_3C905B_TX 0x9055
#define PCI_DEVICE_ID_3COM_3CR990 0x9900
#define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902
#define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903
@@ -1079,24 +919,11 @@
#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909
#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a
-#define PCI_VENDOR_ID_SMC 0x10b8
-#define PCI_DEVICE_ID_SMC_EPIC100 0x0005
#define PCI_VENDOR_ID_AL 0x10b9
-#define PCI_DEVICE_ID_AL_M1445 0x1445
-#define PCI_DEVICE_ID_AL_M1449 0x1449
-#define PCI_DEVICE_ID_AL_M1451 0x1451
-#define PCI_DEVICE_ID_AL_M1461 0x1461
-#define PCI_DEVICE_ID_AL_M1489 0x1489
-#define PCI_DEVICE_ID_AL_M1511 0x1511
-#define PCI_DEVICE_ID_AL_M1513 0x1513
-#define PCI_DEVICE_ID_AL_M1521 0x1521
-#define PCI_DEVICE_ID_AL_M1523 0x1523
-#define PCI_DEVICE_ID_AL_M1531 0x1531
#define PCI_DEVICE_ID_AL_M1533 0x1533
#define PCI_DEVICE_ID_AL_M1535 0x1535
#define PCI_DEVICE_ID_AL_M1541 0x1541
-#define PCI_DEVICE_ID_AL_M1543 0x1543
#define PCI_DEVICE_ID_AL_M1563 0x1563
#define PCI_DEVICE_ID_AL_M1621 0x1621
#define PCI_DEVICE_ID_AL_M1631 0x1631
@@ -1109,49 +936,23 @@
#define PCI_DEVICE_ID_AL_M1681 0x1681
#define PCI_DEVICE_ID_AL_M1683 0x1683
#define PCI_DEVICE_ID_AL_M1689 0x1689
-#define PCI_DEVICE_ID_AL_M3307 0x3307
-#define PCI_DEVICE_ID_AL_M4803 0x5215
#define PCI_DEVICE_ID_AL_M5219 0x5219
#define PCI_DEVICE_ID_AL_M5228 0x5228
#define PCI_DEVICE_ID_AL_M5229 0x5229
-#define PCI_DEVICE_ID_AL_M5237 0x5237
-#define PCI_DEVICE_ID_AL_M5243 0x5243
#define PCI_DEVICE_ID_AL_M5451 0x5451
#define PCI_DEVICE_ID_AL_M7101 0x7101
-#define PCI_VENDOR_ID_MITSUBISHI 0x10ba
-#define PCI_VENDOR_ID_SURECOM 0x10bd
-#define PCI_DEVICE_ID_SURECOM_NE34 0x0e34
#define PCI_VENDOR_ID_NEOMAGIC 0x10c8
-#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001
-#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002
-#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003
-#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004
-#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV 0x0005
-#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS 0x0083
#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016
-#define PCI_VENDOR_ID_ASP 0x10cd
-#define PCI_DEVICE_ID_ASP_ABP940 0x1200
-#define PCI_DEVICE_ID_ASP_ABP940U 0x1300
-#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300
-
-#define PCI_VENDOR_ID_MACRONIX 0x10d9
-#define PCI_DEVICE_ID_MACRONIX_MX98713 0x0512
-#define PCI_DEVICE_ID_MACRONIX_MX987x5 0x0531
#define PCI_VENDOR_ID_TCONRAD 0x10da
#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508
-#define PCI_VENDOR_ID_CERN 0x10dc
-#define PCI_DEVICE_ID_CERN_SPSB_PMC 0x0001
-#define PCI_DEVICE_ID_CERN_SPSB_PCI 0x0002
-#define PCI_DEVICE_ID_CERN_HIPPI_DST 0x0021
-#define PCI_DEVICE_ID_CERN_HIPPI_SRC 0x0022
#define PCI_VENDOR_ID_NVIDIA 0x10de
#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020
@@ -1197,7 +998,6 @@
#define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc
#define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce
#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1
-#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da
#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4
#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5
#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6
@@ -1284,7 +1084,6 @@
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F
#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268
#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269
-#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282
@@ -1335,24 +1134,13 @@
#define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373
#define PCI_VENDOR_ID_IMS 0x10e0
-#define PCI_DEVICE_ID_IMS_8849 0x8849
#define PCI_DEVICE_ID_IMS_TT128 0x9128
#define PCI_DEVICE_ID_IMS_TT3D 0x9135
-#define PCI_VENDOR_ID_TEKRAM2 0x10e1
-#define PCI_DEVICE_ID_TEKRAM2_690c 0x690c
-#define PCI_VENDOR_ID_TUNDRA 0x10e3
-#define PCI_DEVICE_ID_TUNDRA_CA91C042 0x0000
-#define PCI_VENDOR_ID_AMCC 0x10e8
-#define PCI_DEVICE_ID_AMCC_MYRINET 0x8043
-#define PCI_DEVICE_ID_AMCC_PARASTATION 0x8062
-#define PCI_DEVICE_ID_AMCC_S5933 0x807d
-#define PCI_DEVICE_ID_AMCC_S5933_HEPC3 0x809c
#define PCI_VENDOR_ID_INTERG 0x10ea
-#define PCI_DEVICE_ID_INTERG_1680 0x1680
#define PCI_DEVICE_ID_INTERG_1682 0x1682
#define PCI_DEVICE_ID_INTERG_2000 0x2000
#define PCI_DEVICE_ID_INTERG_2010 0x2010
@@ -1360,32 +1148,23 @@
#define PCI_DEVICE_ID_INTERG_5050 0x5050
#define PCI_VENDOR_ID_REALTEK 0x10ec
-#define PCI_DEVICE_ID_REALTEK_8029 0x8029
-#define PCI_DEVICE_ID_REALTEK_8129 0x8129
#define PCI_DEVICE_ID_REALTEK_8139 0x8139
-#define PCI_DEVICE_ID_REALTEK_8169 0x8169
#define PCI_VENDOR_ID_XILINX 0x10ee
#define PCI_DEVICE_ID_RME_DIGI96 0x3fc0
#define PCI_DEVICE_ID_RME_DIGI96_8 0x3fc1
#define PCI_DEVICE_ID_RME_DIGI96_8_PRO 0x3fc2
#define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3
-#define PCI_DEVICE_ID_XILINX_HAMMERFALL 0x3fc4
#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5
#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6
-#define PCI_DEVICE_ID_TURBOPAM 0x4020
-#define PCI_VENDOR_ID_TRUEVISION 0x10fa
-#define PCI_DEVICE_ID_TRUEVISION_T1000 0x000c
#define PCI_VENDOR_ID_INIT 0x1101
-#define PCI_DEVICE_ID_INIT_320P 0x9100
-#define PCI_DEVICE_ID_INIT_360P 0x9500
-#define PCI_VENDOR_ID_CREATIVE 0x1102 // duplicate: ECTIVA
+#define PCI_VENDOR_ID_CREATIVE 0x1102 /* duplicate: ECTIVA */
#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002
-#define PCI_VENDOR_ID_ECTIVA 0x1102 // duplicate: CREATIVE
+#define PCI_VENDOR_ID_ECTIVA 0x1102 /* duplicate: CREATIVE */
#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938
#define PCI_VENDOR_ID_TTI 0x1103
@@ -1395,7 +1174,7 @@
#define PCI_DEVICE_ID_TTI_HPT302 0x0006
#define PCI_DEVICE_ID_TTI_HPT371 0x0007
#define PCI_DEVICE_ID_TTI_HPT374 0x0008
-#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 // apparently a 372N variant?
+#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 /* apparently a 372N variant? */
#define PCI_VENDOR_ID_VIA 0x1106
#define PCI_DEVICE_ID_VIA_8763_0 0x0198
@@ -1408,36 +1187,25 @@
#define PCI_DEVICE_ID_VIA_8363_0 0x0305
#define PCI_DEVICE_ID_VIA_8371_0 0x0391
#define PCI_DEVICE_ID_VIA_8501_0 0x0501
-#define PCI_DEVICE_ID_VIA_82C505 0x0505
#define PCI_DEVICE_ID_VIA_82C561 0x0561
#define PCI_DEVICE_ID_VIA_82C586_1 0x0571
#define PCI_DEVICE_ID_VIA_82C576 0x0576
-#define PCI_DEVICE_ID_VIA_82C585 0x0585
#define PCI_DEVICE_ID_VIA_82C586_0 0x0586
-#define PCI_DEVICE_ID_VIA_82C595 0x0595
#define PCI_DEVICE_ID_VIA_82C596 0x0596
#define PCI_DEVICE_ID_VIA_82C597_0 0x0597
#define PCI_DEVICE_ID_VIA_82C598_0 0x0598
#define PCI_DEVICE_ID_VIA_8601_0 0x0601
#define PCI_DEVICE_ID_VIA_8605_0 0x0605
-#define PCI_DEVICE_ID_VIA_82C680 0x0680
#define PCI_DEVICE_ID_VIA_82C686 0x0686
#define PCI_DEVICE_ID_VIA_82C691_0 0x0691
-#define PCI_DEVICE_ID_VIA_82C693 0x0693
-#define PCI_DEVICE_ID_VIA_82C693_1 0x0698
-#define PCI_DEVICE_ID_VIA_82C926 0x0926
#define PCI_DEVICE_ID_VIA_82C576_1 0x1571
-#define PCI_DEVICE_ID_VIA_82C595_97 0x1595
#define PCI_DEVICE_ID_VIA_82C586_2 0x3038
#define PCI_DEVICE_ID_VIA_82C586_3 0x3040
-#define PCI_DEVICE_ID_VIA_6305 0x3044
#define PCI_DEVICE_ID_VIA_82C596_3 0x3050
#define PCI_DEVICE_ID_VIA_82C596B_3 0x3051
#define PCI_DEVICE_ID_VIA_82C686_4 0x3057
#define PCI_DEVICE_ID_VIA_82C686_5 0x3058
#define PCI_DEVICE_ID_VIA_8233_5 0x3059
-#define PCI_DEVICE_ID_VIA_8233_7 0x3065
-#define PCI_DEVICE_ID_VIA_82C686_6 0x3068
#define PCI_DEVICE_ID_VIA_8233_0 0x3074
#define PCI_DEVICE_ID_VIA_8633_0 0x3091
#define PCI_DEVICE_ID_VIA_8367_0 0x3099
@@ -1455,38 +1223,23 @@
#define PCI_DEVICE_ID_VIA_XN266 0x3156
#define PCI_DEVICE_ID_VIA_8754C_0 0x3168
#define PCI_DEVICE_ID_VIA_8235 0x3177
-#define PCI_DEVICE_ID_VIA_P4N333 0x3178
#define PCI_DEVICE_ID_VIA_8385_0 0x3188
#define PCI_DEVICE_ID_VIA_8377_0 0x3189
#define PCI_DEVICE_ID_VIA_8378_0 0x3205
#define PCI_DEVICE_ID_VIA_8783_0 0x3208
-#define PCI_DEVICE_ID_VIA_P4M400 0x3209
#define PCI_DEVICE_ID_VIA_8237 0x3227
#define PCI_DEVICE_ID_VIA_3296_0 0x0296
-#define PCI_DEVICE_ID_VIA_86C100A 0x6100
#define PCI_DEVICE_ID_VIA_8231 0x8231
#define PCI_DEVICE_ID_VIA_8231_4 0x8235
#define PCI_DEVICE_ID_VIA_8365_1 0x8305
#define PCI_DEVICE_ID_VIA_8371_1 0x8391
-#define PCI_DEVICE_ID_VIA_8501_1 0x8501
-#define PCI_DEVICE_ID_VIA_82C597_1 0x8597
#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
-#define PCI_DEVICE_ID_VIA_8601_1 0x8601
-#define PCI_DEVICE_ID_VIA_8505_1 0x8605
-#define PCI_DEVICE_ID_VIA_8633_1 0xB091
-#define PCI_DEVICE_ID_VIA_8367_1 0xB099
-#define PCI_DEVICE_ID_VIA_P4X266_1 0xB101
-#define PCI_DEVICE_ID_VIA_8615_1 0xB103
-#define PCI_DEVICE_ID_VIA_8361_1 0xB112
-#define PCI_DEVICE_ID_VIA_8235_1 0xB168
#define PCI_DEVICE_ID_VIA_838X_1 0xB188
#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
-#define PCI_VENDOR_ID_SMC2 0x1113
-#define PCI_DEVICE_ID_SMC2_1211TX 0x1211
#define PCI_VENDOR_ID_VORTEX 0x1119
#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000
@@ -1509,18 +1262,6 @@
#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103
#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104
#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105
-#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1 0x0110
-#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1 0x0111
-#define PCI_DEVICE_ID_VORTEX_GDT6537RP1 0x0112
-#define PCI_DEVICE_ID_VORTEX_GDT6557RP1 0x0113
-#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1 0x0114
-#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1 0x0115
-#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2 0x0120
-#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2 0x0121
-#define PCI_DEVICE_ID_VORTEX_GDT6537RP2 0x0122
-#define PCI_DEVICE_ID_VORTEX_GDT6557RP2 0x0123
-#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2 0x0124
-#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2 0x0125
#define PCI_VENDOR_ID_EF 0x111a
#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000
@@ -1532,21 +1273,15 @@
#define PCI_DEVICE_ID_IDT_IDT77201 0x0001
#define PCI_VENDOR_ID_FORE 0x1127
-#define PCI_DEVICE_ID_FORE_PCA200PC 0x0210
#define PCI_DEVICE_ID_FORE_PCA200E 0x0300
-#define PCI_VENDOR_ID_IMAGINGTECH 0x112f
-#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI 0x0000
#define PCI_VENDOR_ID_PHILIPS 0x1131
-#define PCI_DEVICE_ID_PHILIPS_SAA7145 0x7145
#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146
#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730
#define PCI_VENDOR_ID_EICON 0x1133
-#define PCI_DEVICE_ID_EICON_DIVA20PRO 0xe001
#define PCI_DEVICE_ID_EICON_DIVA20 0xe002
-#define PCI_DEVICE_ID_EICON_DIVA20PRO_U 0xe003
#define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004
#define PCI_DEVICE_ID_EICON_DIVA201 0xe005
#define PCI_DEVICE_ID_EICON_DIVA202 0xe00b
@@ -1558,35 +1293,17 @@
#define PCI_VENDOR_ID_ZIATECH 0x1138
#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550
-#define PCI_VENDOR_ID_CYCLONE 0x113c
-#define PCI_DEVICE_ID_CYCLONE_SDK 0x0001
-#define PCI_VENDOR_ID_ALLIANCE 0x1142
-#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO 0x3210
-#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO 0x6422
-#define PCI_DEVICE_ID_ALLIANCE_AT24 0x6424
-#define PCI_DEVICE_ID_ALLIANCE_AT3D 0x643d
#define PCI_VENDOR_ID_SYSKONNECT 0x1148
-#define PCI_DEVICE_ID_SYSKONNECT_FP 0x4000
#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200
#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300
#define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320
#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400
#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500
-#define PCI_VENDOR_ID_VMIC 0x114a
-#define PCI_DEVICE_ID_VMIC_VME 0x7587
#define PCI_VENDOR_ID_DIGI 0x114f
-#define PCI_DEVICE_ID_DIGI_EPC 0x0002
-#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH 0x0003
-#define PCI_DEVICE_ID_DIGI_XEM 0x0004
-#define PCI_DEVICE_ID_DIGI_XR 0x0005
-#define PCI_DEVICE_ID_DIGI_CX 0x0006
-#define PCI_DEVICE_ID_DIGI_XRJ 0x0009
-#define PCI_DEVICE_ID_DIGI_EPCJ 0x000a
-#define PCI_DEVICE_ID_DIGI_XR_920 0x0027
#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070
#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071
#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072
@@ -1596,23 +1313,15 @@
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
-#define PCI_VENDOR_ID_MUTECH 0x1159
-#define PCI_DEVICE_ID_MUTECH_MV1000 0x0001
#define PCI_VENDOR_ID_XIRCOM 0x115d
-#define PCI_DEVICE_ID_XIRCOM_X3201_ETH 0x0003
#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103
-#define PCI_VENDOR_ID_RENDITION 0x1163
-#define PCI_DEVICE_ID_RENDITION_VERITE 0x0001
-#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000
#define PCI_VENDOR_ID_SERVERWORKS 0x1166
#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008
#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
-#define PCI_DEVICE_ID_SERVERWORKS_CIOB30 0x0010
-#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011
#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
@@ -1622,13 +1331,7 @@
#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214
#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
-#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220
-#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB
-#define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221
#define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227
-#define PCI_DEVICE_ID_SERVERWORKS_GCLE 0x0225
-#define PCI_DEVICE_ID_SERVERWORKS_GCLE2 0x0227
-#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230
#define PCI_VENDOR_ID_SBE 0x1176
#define PCI_DEVICE_ID_SBE_WANXL100 0x0301
@@ -1639,17 +1342,12 @@
#define PCI_DEVICE_ID_TOSHIBA_PICCOLO 0x0102
#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0103
#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0105
-#define PCI_DEVICE_ID_TOSHIBA_601 0x0601
#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a
-#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_A 0x0603
-#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_B 0x060a
#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f
#define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617
#define PCI_VENDOR_ID_TOSHIBA_2 0x102f
-#define PCI_DEVICE_ID_TOSHIBA_TX3927 0x000a
#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030
-#define PCI_DEVICE_ID_TOSHIBA_TX4927 0x0180
#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108
#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3
@@ -1664,7 +1362,6 @@
#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00
#define PCI_VENDOR_ID_ARTOP 0x1191
-#define PCI_DEVICE_ID_ARTOP_ATP8400 0x0004
#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005
#define PCI_DEVICE_ID_ARTOP_ATP860 0x0006
#define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007
@@ -1677,16 +1374,11 @@
#define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040
#define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050
#define PCI_DEVICE_ID_ARTOP_8060 0x8060
-#define PCI_DEVICE_ID_ARTOP_AEC67160 0x8080
-#define PCI_DEVICE_ID_ARTOP_AEC67160_2 0x8081
-#define PCI_DEVICE_ID_ARTOP_AEC67162 0x808a
#define PCI_VENDOR_ID_ZEITNET 0x1193
#define PCI_DEVICE_ID_ZEITNET_1221 0x0001
#define PCI_DEVICE_ID_ZEITNET_1225 0x0002
-#define PCI_VENDOR_ID_OMEGA 0x119b
-#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221
#define PCI_VENDOR_ID_FUJITSU_ME 0x119e
#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001
@@ -1696,61 +1388,41 @@
#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334
#define PCI_VENDOR_ID_MARVELL 0x11ab
-#define PCI_DEVICE_ID_MARVELL_GT64011 0x4146
-#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146
#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
#define PCI_DEVICE_ID_MARVELL_GT96100 0x9652
#define PCI_DEVICE_ID_MARVELL_GT96100A 0x9653
-#define PCI_VENDOR_ID_LITEON 0x11ad
-#define PCI_DEVICE_ID_LITEON_LNE100TX 0x0002
#define PCI_VENDOR_ID_V3 0x11b0
#define PCI_DEVICE_ID_V3_V960 0x0001
-#define PCI_DEVICE_ID_V3_V350 0x0001
-#define PCI_DEVICE_ID_V3_V961 0x0002
#define PCI_DEVICE_ID_V3_V351 0x0002
-#define PCI_VENDOR_ID_NP 0x11bc
-#define PCI_DEVICE_ID_NP_PCI_FDDI 0x0001
#define PCI_VENDOR_ID_ATT 0x11c1
-#define PCI_DEVICE_ID_ATT_L56XMF 0x0440
#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480
-#define PCI_VENDOR_ID_NEC2 0x11c3 /* NEC (2nd) */
#define PCI_VENDOR_ID_SPECIALIX 0x11cb
#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000
-#define PCI_DEVICE_ID_SPECIALIX_XIO 0x4000
#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000
#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
-#define PCI_VENDOR_ID_AURAVISION 0x11d1
-#define PCI_DEVICE_ID_AURAVISION_VXP524 0x01f7
#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4
#define PCI_DEVICE_ID_AD1889JS 0x1889
-#define PCI_VENDOR_ID_IKON 0x11d5
-#define PCI_DEVICE_ID_IKON_10115 0x0115
-#define PCI_DEVICE_ID_IKON_10117 0x0117
-#define PCI_VENDOR_ID_SEGA 0x11db
#define PCI_DEVICE_ID_SEGA_BBA 0x1234
#define PCI_VENDOR_ID_ZORAN 0x11de
#define PCI_DEVICE_ID_ZORAN_36057 0x6057
#define PCI_DEVICE_ID_ZORAN_36120 0x6120
-#define PCI_VENDOR_ID_KINETIC 0x11f4
-#define PCI_DEVICE_ID_KINETIC_2915 0x2915
#define PCI_VENDOR_ID_COMPEX 0x11f6
#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112
-#define PCI_DEVICE_ID_COMPEX_RL2000 0x1401
#define PCI_VENDOR_ID_RP 0x11fe
#define PCI_DEVICE_ID_RP32INTF 0x0001
@@ -1764,7 +1436,6 @@
#define PCI_DEVICE_ID_RP16SNI 0x0009
#define PCI_DEVICE_ID_RPP4 0x000A
#define PCI_DEVICE_ID_RPP8 0x000B
-#define PCI_DEVICE_ID_RP8M 0x000C
#define PCI_DEVICE_ID_RP4M 0x000D
#define PCI_DEVICE_ID_RP2_232 0x000E
#define PCI_DEVICE_ID_RP2_422 0x000F
@@ -1792,10 +1463,6 @@
#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320
#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321
-/* Allied Telesyn */
-#define PCI_VENDOR_ID_AT 0x1259
-#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703
-
#define PCI_VENDOR_ID_ESSENTIAL 0x120f
#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001
@@ -1812,10 +1479,7 @@
#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005
#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009
-#define PCI_VENDOR_ID_SIGMADES 0x1236
-#define PCI_DEVICE_ID_SIGMADES_6425 0x6401
-#define PCI_VENDOR_ID_CCUBE 0x123f
#define PCI_VENDOR_ID_AVM 0x1244
#define PCI_DEVICE_ID_AVM_B1 0x0700
@@ -1825,19 +1489,8 @@
#define PCI_DEVICE_ID_AVM_C2 0x1100
#define PCI_DEVICE_ID_AVM_T1 0x1200
-#define PCI_VENDOR_ID_DIPIX 0x1246
#define PCI_VENDOR_ID_STALLION 0x124d
-#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000
-#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002
-#define PCI_DEVICE_ID_STALLION_EIOPCI 0x0003
-
-#define PCI_VENDOR_ID_OPTIBASE 0x1255
-#define PCI_DEVICE_ID_OPTIBASE_FORGE 0x1110
-#define PCI_DEVICE_ID_OPTIBASE_FUSION 0x1210
-#define PCI_DEVICE_ID_OPTIBASE_VPLEX 0x2110
-#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC 0x2120
-#define PCI_DEVICE_ID_OPTIBASE_VQUEST 0x2130
/* Allied Telesyn */
#define PCI_VENDOR_ID_AT 0x1259
@@ -1846,7 +1499,6 @@
#define PCI_VENDOR_ID_ESS 0x125d
#define PCI_DEVICE_ID_ESS_ESS1968 0x1968
-#define PCI_DEVICE_ID_ESS_AUDIOPCI 0x1969
#define PCI_DEVICE_ID_ESS_ESS1978 0x1978
#define PCI_DEVICE_ID_ESS_ALLEGRO_1 0x1988
#define PCI_DEVICE_ID_ESS_ALLEGRO 0x1989
@@ -1859,11 +1511,7 @@
#define PCI_VENDOR_ID_SATSAGEM 0x1267
#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016
-#define PCI_DEVICE_ID_SATSAGEM_PCR2101 0x5352
-#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b
-#define PCI_VENDOR_ID_HUGHES 0x1273
-#define PCI_DEVICE_ID_HUGHES_DIRECPC 0x0002
#define PCI_VENDOR_ID_ENSONIQ 0x1274
#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880
@@ -1884,13 +1532,10 @@
#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886
/* formerly Platform Tech */
-#define PCI_VENDOR_ID_ESS_OLD 0x1285
#define PCI_DEVICE_ID_ESS_ESS0100 0x0100
#define PCI_VENDOR_ID_ALTEON 0x12ae
-#define PCI_DEVICE_ID_ALTEON_ACENIC 0x0001
-#define PCI_VENDOR_ID_USR 0x12B9
#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001
@@ -1905,8 +1550,6 @@
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B
-#define PCI_VENDOR_ID_PICTUREL 0x12c5
-#define PCI_DEVICE_ID_PICTUREL_PCIVST 0x0081
#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2
#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
@@ -1928,8 +1571,6 @@
#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
#define PCI_DEVICE_ID_LML_33R10 0x8a02
-#define PCI_VENDOR_ID_CBOARDS 0x1307
-#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
#define PCI_VENDOR_ID_SIIG 0x131f
#define PCI_SUBVENDOR_ID_SIIG 0x131f
@@ -1973,7 +1614,6 @@
#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050
#define PCI_VENDOR_ID_RADISYS 0x1331
-#define PCI_DEVICE_ID_RADISYS_ENP2611 0x0030
#define PCI_VENDOR_ID_DOMEX 0x134a
#define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001
@@ -1981,8 +1621,6 @@
#define PCI_VENDOR_ID_QUATECH 0x135C
#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020
-#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030
-#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040
#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050
#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060
@@ -2001,7 +1639,6 @@
#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106
#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107
#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108
-#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS 0x0109
#define PCI_VENDOR_ID_KAWASAKI 0x136b
#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01
@@ -2015,12 +1652,9 @@
#define PCI_DEVICE_ID_LMC_SSI 0x0005
#define PCI_DEVICE_ID_LMC_T1 0x0006
-#define PCI_VENDOR_ID_MARIAN 0x1382
-#define PCI_DEVICE_ID_MARIAN_PRODIF_PLUS 0x2048
#define PCI_VENDOR_ID_NETGEAR 0x1385
#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a
-#define PCI_DEVICE_ID_NETGEAR_GA622 0x622a
#define PCI_VENDOR_ID_APPLICOM 0x1389
#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
@@ -2043,9 +1677,6 @@
#define PCI_DEVICE_ID_MOXA_CP134U 0x1340
#define PCI_DEVICE_ID_MOXA_C168 0x1680
#define PCI_DEVICE_ID_MOXA_CP168U 0x1681
-#define PCI_DEVICE_ID_MOXA_CP204J 0x2040
-#define PCI_DEVICE_ID_MOXA_C218 0x2180
-#define PCI_DEVICE_ID_MOXA_C320 0x3200
#define PCI_VENDOR_ID_CCD 0x1397
#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0
@@ -2066,9 +1697,7 @@
#define PCI_VENDOR_ID_MICROGATE 0x13c0
#define PCI_DEVICE_ID_MICROGATE_USC 0x0010
-#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020
#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030
-#define PCI_DEVICE_ID_MICROGATE_USC2 0x0210
#define PCI_VENDOR_ID_3WARE 0x13C1
#define PCI_DEVICE_ID_3WARE_1000 0x1000
@@ -2119,10 +1748,6 @@
#define PCI_VENDOR_ID_SAMSUNG 0x144d
-#define PCI_VENDOR_ID_AIRONET 0x14b9
-#define PCI_DEVICE_ID_AIRONET_4800_1 0x0001
-#define PCI_DEVICE_ID_AIRONET_4800 0x4500 // values switched? see
-#define PCI_DEVICE_ID_AIRONET_4500 0x4800 // drivers/net/aironet4500_card.c
#define PCI_VENDOR_ID_TITAN 0x14D2
#define PCI_DEVICE_ID_TITAN_010L 0x8001
@@ -2141,8 +1766,6 @@
#define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400
#define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402
-#define PCI_VENDOR_ID_SIPACKETS 0x14d9
-#define PCI_DEVICE_ID_SP_HT 0x0010
#define PCI_VENDOR_ID_AFAVLAB 0x14db
#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180
@@ -2165,11 +1788,13 @@
#define PCI_DEVICE_ID_TIGON3_5721 0x1659
#define PCI_DEVICE_ID_TIGON3_5705M 0x165d
#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e
+#define PCI_DEVICE_ID_TIGON3_5714 0x1668
#define PCI_DEVICE_ID_TIGON3_5780 0x166a
#define PCI_DEVICE_ID_TIGON3_5780S 0x166b
#define PCI_DEVICE_ID_TIGON3_5705F 0x166e
#define PCI_DEVICE_ID_TIGON3_5750 0x1676
#define PCI_DEVICE_ID_TIGON3_5751 0x1677
+#define PCI_DEVICE_ID_TIGON3_5715 0x1678
#define PCI_DEVICE_ID_TIGON3_5750M 0x167c
#define PCI_DEVICE_ID_TIGON3_5751M 0x167d
#define PCI_DEVICE_ID_TIGON3_5751F 0x167e
@@ -2207,8 +1832,6 @@
#define PCI_VENDOR_ID_CHELSIO 0x1425
-#define PCI_VENDOR_ID_MIPS 0x153f
-#define PCI_DEVICE_ID_SOC_IT 0x0001
#define PCI_VENDOR_ID_SYBA 0x1592
#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782
@@ -2228,15 +1851,7 @@
#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274
#define PCI_VENDOR_ID_PDC 0x15e9
-#define PCI_DEVICE_ID_PDC_1841 0x1841
-#define PCI_VENDOR_ID_MACROLINK 0x15ed
-#define PCI_DEVICE_ID_MACROLINK_MCCS8 0x1000
-#define PCI_DEVICE_ID_MACROLINK_MCCS 0x1001
-#define PCI_DEVICE_ID_MACROLINK_MCCS8H 0x1002
-#define PCI_DEVICE_ID_MACROLINK_MCCSH 0x1003
-#define PCI_DEVICE_ID_MACROLINK_MCCR8 0x2000
-#define PCI_DEVICE_ID_MACROLINK_MCCR 0x2001
#define PCI_VENDOR_ID_FARSITE 0x1619
#define PCI_DEVICE_ID_FARSITE_T2P 0x0400
@@ -2254,7 +1869,6 @@
#define PCI_DEVICE_ID_REVOLUTION 0x0044
#define PCI_VENDOR_ID_LINKSYS 0x1737
-#define PCI_DEVICE_ID_LINKSYS_EG1032 0x1032
#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064
#define PCI_VENDOR_ID_ALTIMA 0x173b
@@ -2269,7 +1883,6 @@
#define PCI_DEVICE_ID_HERC_WIN 0x5732
#define PCI_DEVICE_ID_HERC_UNI 0x5832
-#define PCI_VENDOR_ID_INFINICON 0x1820
#define PCI_VENDOR_ID_SITECOM 0x182d
#define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069
@@ -2279,8 +1892,6 @@
#define PCI_VENDOR_ID_TDI 0x192E
#define PCI_DEVICE_ID_TDI_EHCI 0x0101
-#define PCI_VENDOR_ID_SYMPHONY 0x1c1c
-#define PCI_DEVICE_ID_SYMPHONY_101 0x0001
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
@@ -2289,70 +1900,33 @@
#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
#define PCI_VENDOR_ID_3DLABS 0x3d3d
-#define PCI_DEVICE_ID_3DLABS_300SX 0x0001
-#define PCI_DEVICE_ID_3DLABS_500TX 0x0002
-#define PCI_DEVICE_ID_3DLABS_DELTA 0x0003
-#define PCI_DEVICE_ID_3DLABS_PERMEDIA 0x0004
-#define PCI_DEVICE_ID_3DLABS_MX 0x0006
#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007
-#define PCI_DEVICE_ID_3DLABS_GAMMA 0x0008
#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009
-#define PCI_VENDOR_ID_AVANCE 0x4005
-#define PCI_DEVICE_ID_AVANCE_ALG2064 0x2064
-#define PCI_DEVICE_ID_AVANCE_2302 0x2302
#define PCI_VENDOR_ID_AKS 0x416c
#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
-#define PCI_DEVICE_ID_AKS_CPC 0x0200
-#define PCI_VENDOR_ID_REDCREEK 0x4916
-#define PCI_DEVICE_ID_RC45 0x1960
-#define PCI_VENDOR_ID_NETVIN 0x4a14
-#define PCI_DEVICE_ID_NETVIN_NV5000SC 0x5000
#define PCI_VENDOR_ID_S3 0x5333
-#define PCI_DEVICE_ID_S3_PLATO_PXS 0x0551
-#define PCI_DEVICE_ID_S3_ViRGE 0x5631
#define PCI_DEVICE_ID_S3_TRIO 0x8811
-#define PCI_DEVICE_ID_S3_AURORA64VP 0x8812
-#define PCI_DEVICE_ID_S3_TRIO64UVP 0x8814
-#define PCI_DEVICE_ID_S3_ViRGE_VX 0x883d
#define PCI_DEVICE_ID_S3_868 0x8880
-#define PCI_DEVICE_ID_S3_928 0x88b0
-#define PCI_DEVICE_ID_S3_864_1 0x88c0
-#define PCI_DEVICE_ID_S3_864_2 0x88c1
-#define PCI_DEVICE_ID_S3_964_1 0x88d0
-#define PCI_DEVICE_ID_S3_964_2 0x88d1
#define PCI_DEVICE_ID_S3_968 0x88f0
-#define PCI_DEVICE_ID_S3_TRIO64V2 0x8901
-#define PCI_DEVICE_ID_S3_PLATO_PXG 0x8902
-#define PCI_DEVICE_ID_S3_ViRGE_DXGX 0x8a01
-#define PCI_DEVICE_ID_S3_ViRGE_GX2 0x8a10
#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25
-#define PCI_DEVICE_ID_S3_ViRGE_MX 0x8c01
-#define PCI_DEVICE_ID_S3_ViRGE_MXP 0x8c02
-#define PCI_DEVICE_ID_S3_ViRGE_MXPMV 0x8c03
#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04
#define PCI_DEVICE_ID_S3_SONICVIBES 0xca00
#define PCI_VENDOR_ID_DUNORD 0x5544
#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
+
#define PCI_VENDOR_ID_DCI 0x6666
#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001
#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002
-#define PCI_VENDOR_ID_DUNORD 0x5544
-#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
-
-#define PCI_VENDOR_ID_GENROCO 0x5555
-#define PCI_DEVICE_ID_GENROCO_HFP832 0x0003
-
#define PCI_VENDOR_ID_INTEL 0x8086
#define PCI_DEVICE_ID_INTEL_EESSC 0x0008
-#define PCI_DEVICE_ID_INTEL_21145 0x0039
#define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320
#define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321
#define PCI_DEVICE_ID_INTEL_PXH_0 0x0329
@@ -2361,30 +1935,17 @@
#define PCI_DEVICE_ID_INTEL_82375 0x0482
#define PCI_DEVICE_ID_INTEL_82424 0x0483
#define PCI_DEVICE_ID_INTEL_82378 0x0484
-#define PCI_DEVICE_ID_INTEL_82430 0x0486
-#define PCI_DEVICE_ID_INTEL_82434 0x04a3
#define PCI_DEVICE_ID_INTEL_I960 0x0960
#define PCI_DEVICE_ID_INTEL_I960RM 0x0962
-#define PCI_DEVICE_ID_INTEL_82562ET 0x1031
-#define PCI_DEVICE_ID_INTEL_82801CAM 0x1038
#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130
-#define PCI_DEVICE_ID_INTEL_82815_AB 0x1131
#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132
-#define PCI_DEVICE_ID_INTEL_82559ER 0x1209
#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
-#define PCI_DEVICE_ID_INTEL_82092AA_1 0x1222
-#define PCI_DEVICE_ID_INTEL_7116 0x1223
#define PCI_DEVICE_ID_INTEL_7505_0 0x2550
-#define PCI_DEVICE_ID_INTEL_7505_1 0x2552
#define PCI_DEVICE_ID_INTEL_7205_0 0x255d
-#define PCI_DEVICE_ID_INTEL_82596 0x1226
-#define PCI_DEVICE_ID_INTEL_82865 0x1227
-#define PCI_DEVICE_ID_INTEL_82557 0x1229
#define PCI_DEVICE_ID_INTEL_82437 0x122d
#define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e
#define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230
#define PCI_DEVICE_ID_INTEL_82371MX 0x1234
-#define PCI_DEVICE_ID_INTEL_82437MX 0x1235
#define PCI_DEVICE_ID_INTEL_82441 0x1237
#define PCI_DEVICE_ID_INTEL_82380FB 0x124b
#define PCI_DEVICE_ID_INTEL_82439 0x1250
@@ -2393,83 +1954,53 @@
#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30
#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410
#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411
-#define PCI_DEVICE_ID_INTEL_82801AA_2 0x2412
#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413
#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415
#define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416
#define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418
#define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420
#define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421
-#define PCI_DEVICE_ID_INTEL_82801AB_2 0x2422
#define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423
#define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425
#define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426
#define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428
#define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440
-#define PCI_DEVICE_ID_INTEL_82801BA_1 0x2442
#define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443
-#define PCI_DEVICE_ID_INTEL_82801BA_3 0x2444
#define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445
-#define PCI_DEVICE_ID_INTEL_82801BA_5 0x2446
#define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448
-#define PCI_DEVICE_ID_INTEL_82801BA_7 0x2449
#define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a
#define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b
#define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c
#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e
#define PCI_DEVICE_ID_INTEL_82801E_0 0x2450
-#define PCI_DEVICE_ID_INTEL_82801E_2 0x2452
-#define PCI_DEVICE_ID_INTEL_82801E_3 0x2453
-#define PCI_DEVICE_ID_INTEL_82801E_9 0x2459
#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b
-#define PCI_DEVICE_ID_INTEL_82801E_13 0x245d
-#define PCI_DEVICE_ID_INTEL_82801E_14 0x245e
#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480
-#define PCI_DEVICE_ID_INTEL_82801CA_2 0x2482
#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483
-#define PCI_DEVICE_ID_INTEL_82801CA_4 0x2484
#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485
#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486
-#define PCI_DEVICE_ID_INTEL_82801CA_7 0x2487
#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a
#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b
#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c
#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0
#define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1
-#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2
#define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3
-#define PCI_DEVICE_ID_INTEL_82801DB_4 0x24c4
#define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5
#define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6
-#define PCI_DEVICE_ID_INTEL_82801DB_7 0x24c7
#define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9
#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca
#define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb
#define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc
-#define PCI_DEVICE_ID_INTEL_82801DB_13 0x24cd
#define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0
#define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1
-#define PCI_DEVICE_ID_INTEL_82801EB_2 0x24d2
#define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3
-#define PCI_DEVICE_ID_INTEL_82801EB_4 0x24d4
#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5
#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6
-#define PCI_DEVICE_ID_INTEL_82801EB_7 0x24d7
#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db
-#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd
#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1
#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2
-#define PCI_DEVICE_ID_INTEL_ESB_3 0x25a3
-#define PCI_DEVICE_ID_INTEL_ESB_31 0x25b0
#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4
#define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6
-#define PCI_DEVICE_ID_INTEL_ESB_6 0x25a7
-#define PCI_DEVICE_ID_INTEL_ESB_7 0x25a9
-#define PCI_DEVICE_ID_INTEL_ESB_8 0x25aa
#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab
-#define PCI_DEVICE_ID_INTEL_ESB_11 0x25ac
-#define PCI_DEVICE_ID_INTEL_ESB_12 0x25ad
-#define PCI_DEVICE_ID_INTEL_ESB_13 0x25ae
#define PCI_DEVICE_ID_INTEL_82820_HB 0x2500
#define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501
#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530
@@ -2479,7 +2010,6 @@
#define PCI_DEVICE_ID_INTEL_82865_HB 0x2570
#define PCI_DEVICE_ID_INTEL_82865_IG 0x2572
#define PCI_DEVICE_ID_INTEL_82875_HB 0x2578
-#define PCI_DEVICE_ID_INTEL_82875_IG 0x257b
#define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580
#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582
#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590
@@ -2489,80 +2019,23 @@
#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640
#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642
-#define PCI_DEVICE_ID_INTEL_ICH6_3 0x2651
-#define PCI_DEVICE_ID_INTEL_ICH6_4 0x2652
-#define PCI_DEVICE_ID_INTEL_ICH6_5 0x2653
-#define PCI_DEVICE_ID_INTEL_ICH6_6 0x2658
-#define PCI_DEVICE_ID_INTEL_ICH6_7 0x2659
-#define PCI_DEVICE_ID_INTEL_ICH6_8 0x265a
-#define PCI_DEVICE_ID_INTEL_ICH6_9 0x265b
-#define PCI_DEVICE_ID_INTEL_ICH6_10 0x265c
-#define PCI_DEVICE_ID_INTEL_ICH6_11 0x2660
-#define PCI_DEVICE_ID_INTEL_ICH6_12 0x2662
-#define PCI_DEVICE_ID_INTEL_ICH6_13 0x2664
-#define PCI_DEVICE_ID_INTEL_ICH6_14 0x2666
-#define PCI_DEVICE_ID_INTEL_ICH6_15 0x2668
#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a
#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d
#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e
#define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f
#define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670
-#define PCI_DEVICE_ID_INTEL_ESB2_1 0x2680
-#define PCI_DEVICE_ID_INTEL_ESB2_2 0x2681
-#define PCI_DEVICE_ID_INTEL_ESB2_3 0x2682
-#define PCI_DEVICE_ID_INTEL_ESB2_4 0x2683
-#define PCI_DEVICE_ID_INTEL_ESB2_5 0x2688
-#define PCI_DEVICE_ID_INTEL_ESB2_6 0x2689
-#define PCI_DEVICE_ID_INTEL_ESB2_7 0x268a
-#define PCI_DEVICE_ID_INTEL_ESB2_8 0x268b
-#define PCI_DEVICE_ID_INTEL_ESB2_9 0x268c
-#define PCI_DEVICE_ID_INTEL_ESB2_10 0x2690
-#define PCI_DEVICE_ID_INTEL_ESB2_11 0x2692
-#define PCI_DEVICE_ID_INTEL_ESB2_12 0x2694
-#define PCI_DEVICE_ID_INTEL_ESB2_13 0x2696
#define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698
-#define PCI_DEVICE_ID_INTEL_ESB2_15 0x2699
-#define PCI_DEVICE_ID_INTEL_ESB2_16 0x269a
#define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b
#define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e
#define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8
#define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9
-#define PCI_DEVICE_ID_INTEL_ICH7_2 0x27c0
-#define PCI_DEVICE_ID_INTEL_ICH7_3 0x27c1
#define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0
#define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd
-#define PCI_DEVICE_ID_INTEL_ICH7_5 0x27c4
-#define PCI_DEVICE_ID_INTEL_ICH7_6 0x27c5
-#define PCI_DEVICE_ID_INTEL_ICH7_7 0x27c8
-#define PCI_DEVICE_ID_INTEL_ICH7_8 0x27c9
-#define PCI_DEVICE_ID_INTEL_ICH7_9 0x27ca
-#define PCI_DEVICE_ID_INTEL_ICH7_10 0x27cb
-#define PCI_DEVICE_ID_INTEL_ICH7_11 0x27cc
-#define PCI_DEVICE_ID_INTEL_ICH7_12 0x27d0
-#define PCI_DEVICE_ID_INTEL_ICH7_13 0x27d2
-#define PCI_DEVICE_ID_INTEL_ICH7_14 0x27d4
-#define PCI_DEVICE_ID_INTEL_ICH7_15 0x27d6
-#define PCI_DEVICE_ID_INTEL_ICH7_16 0x27d8
#define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da
-#define PCI_DEVICE_ID_INTEL_ICH7_18 0x27dc
#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd
#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de
#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df
-#define PCI_DEVICE_ID_INTEL_ICH7_22 0x27e0
-#define PCI_DEVICE_ID_INTEL_ICH7_23 0x27e2
#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340
-#define PCI_DEVICE_ID_INTEL_ESB2_19 0x3500
-#define PCI_DEVICE_ID_INTEL_ESB2_20 0x3501
-#define PCI_DEVICE_ID_INTEL_ESB2_21 0x3504
-#define PCI_DEVICE_ID_INTEL_ESB2_22 0x3505
-#define PCI_DEVICE_ID_INTEL_ESB2_23 0x350c
-#define PCI_DEVICE_ID_INTEL_ESB2_24 0x350d
-#define PCI_DEVICE_ID_INTEL_ESB2_25 0x3510
-#define PCI_DEVICE_ID_INTEL_ESB2_26 0x3511
-#define PCI_DEVICE_ID_INTEL_ESB2_27 0x3514
-#define PCI_DEVICE_ID_INTEL_ESB2_28 0x3515
-#define PCI_DEVICE_ID_INTEL_ESB2_29 0x3518
-#define PCI_DEVICE_ID_INTEL_ESB2_30 0x3519
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580
@@ -2576,7 +2049,6 @@
#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599
#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a
#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e
-#define PCI_DEVICE_ID_INTEL_80310 0x530d
#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020
@@ -2601,22 +2073,15 @@
#define PCI_DEVICE_ID_INTEL_440MX_6 0x7196
#define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198
#define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199
-#define PCI_DEVICE_ID_INTEL_82443MX_2 0x719a
#define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b
#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0
-#define PCI_DEVICE_ID_INTEL_82443GX_1 0x71a1
#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
-#define PCI_DEVICE_ID_INTEL_82372FB_0 0x7600
#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
-#define PCI_DEVICE_ID_INTEL_82372FB_2 0x7602
-#define PCI_DEVICE_ID_INTEL_82372FB_3 0x7603
#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4
-#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5
#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca
#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb
#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea
#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500
-#define PCI_DEVICE_ID_INTEL_IXP2400 0x9001
#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004
#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152
@@ -2629,7 +2094,6 @@
#define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003
#define PCI_VENDOR_ID_KTI 0x8e2e
-#define PCI_DEVICE_ID_KTI_ET32P2 0x3000
#define PCI_VENDOR_ID_ADAPTEC 0x9004
#define PCI_DEVICE_ID_ADAPTEC_7810 0x1078
@@ -2637,7 +2101,6 @@
#define PCI_DEVICE_ID_ADAPTEC_38602 0x3860
#define PCI_DEVICE_ID_ADAPTEC_7850 0x5078
#define PCI_DEVICE_ID_ADAPTEC_7855 0x5578
-#define PCI_DEVICE_ID_ADAPTEC_5800 0x5800
#define PCI_DEVICE_ID_ADAPTEC_3860 0x6038
#define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075
#define PCI_DEVICE_ID_ADAPTEC_7860 0x6078
@@ -2657,7 +2120,6 @@
#define PCI_DEVICE_ID_ADAPTEC_7886 0x8678
#define PCI_DEVICE_ID_ADAPTEC_7887 0x8778
#define PCI_DEVICE_ID_ADAPTEC_7888 0x8878
-#define PCI_DEVICE_ID_ADAPTEC_1030 0x8b78
#define PCI_VENDOR_ID_ADAPTEC2 0x9005
#define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010
@@ -2677,8 +2139,6 @@
#define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf
#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503
-#define PCI_VENDOR_ID_ATRONICS 0x907f
-#define PCI_DEVICE_ID_ATRONICS_2015 0x2015
#define PCI_VENDOR_ID_HOLTEK 0x9412
#define PCI_DEVICE_ID_HOLTEK_6565 0x6565
@@ -2711,7 +2171,3 @@
#define PCI_DEVICE_ID_RME_DIGI32_PRO 0x9897
#define PCI_DEVICE_ID_RME_DIGI32_8 0x9898
-#define PCI_VENDOR_ID_ARK 0xedd8
-#define PCI_DEVICE_ID_ARK_STING 0xa091
-#define PCI_DEVICE_ID_ARK_STINGARK 0xa099
-#define PCI_DEVICE_ID_ARK_2000MT 0xa0a1
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 5cfb076..1514098 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -170,6 +170,7 @@
struct pm_ops {
suspend_disk_method_t pm_disk_mode;
+ int (*valid)(suspend_state_t state);
int (*prepare)(suspend_state_t state);
int (*enter)(suspend_state_t state);
int (*finish)(suspend_state_t state);
@@ -219,10 +220,11 @@
struct dev_pm_info {
pm_message_t power_state;
+ unsigned can_wakeup:1;
#ifdef CONFIG_PM
+ unsigned should_wakeup:1;
pm_message_t prev_state;
void * saved_state;
- atomic_t pm_users;
struct device * pm_parent;
struct list_head entry;
#endif
@@ -236,13 +238,48 @@
#ifdef CONFIG_PM
extern int device_suspend(pm_message_t state);
-#else
+
+#define device_set_wakeup_enable(dev,val) \
+ ((dev)->power.should_wakeup = !!(val))
+#define device_may_wakeup(dev) \
+ (device_can_wakeup(dev) && (dev)->power.should_wakeup)
+
+extern int dpm_runtime_suspend(struct device *, pm_message_t);
+extern void dpm_runtime_resume(struct device *);
+
+#else /* !CONFIG_PM */
+
static inline int device_suspend(pm_message_t state)
{
return 0;
}
+
+#define device_set_wakeup_enable(dev,val) do{}while(0)
+#define device_may_wakeup(dev) (0)
+
+static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state)
+{
+ return 0;
+}
+
+static inline void dpm_runtime_resume(struct device * dev)
+{
+
+}
+
#endif
+/* changes to device_may_wakeup take effect on the next pm state change.
+ * by default, devices should wakeup if they can.
+ */
+#define device_can_wakeup(dev) \
+ ((dev)->power.can_wakeup)
+#define device_init_wakeup(dev,val) \
+ do { \
+ device_can_wakeup(dev) = !!(val); \
+ device_set_wakeup_enable(dev,val); \
+ } while(0)
+
#endif /* __KERNEL__ */
#endif /* _LINUX_PM_H */
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index 045d476..9f0f928 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -24,7 +24,7 @@
struct radix_tree_root {
unsigned int height;
- unsigned int gfp_mask;
+ gfp_t gfp_mask;
struct radix_tree_node *rnode;
};
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 70191a5..cce2559 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -275,6 +275,7 @@
extern void rcu_init(void);
extern void rcu_check_callbacks(int cpu, int user);
extern void rcu_restart_cpu(int cpu);
+extern long rcu_batches_completed(void);
/* Exported interfaces */
extern void FASTCALL(call_rcu(struct rcu_head *head,
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index af00b10..001ab82 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -1972,7 +1972,7 @@
/* fix_nodes.c */
#ifdef CONFIG_REISERFS_CHECK
-void *reiserfs_kmalloc(size_t size, int flags, struct super_block *s);
+void *reiserfs_kmalloc(size_t size, gfp_t flags, struct super_block *s);
void reiserfs_kfree(const void *vp, size_t size, struct super_block *s);
#else
static inline void *reiserfs_kmalloc(size_t size, int flags,
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index e80fb7ee..35b30e6 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -95,8 +95,8 @@
/*
* Called from mm/filemap_xip.c to unmap empty zero page
*/
-pte_t *page_check_address(struct page *, struct mm_struct *, unsigned long);
-
+pte_t *page_check_address(struct page *, struct mm_struct *,
+ unsigned long, spinlock_t **);
/*
* Used by swapoff to help locate where page is expected in vma.
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
index b52a2af..f30f805 100644
--- a/include/linux/rwsem-spinlock.h
+++ b/include/linux/rwsem-spinlock.h
@@ -61,5 +61,10 @@
extern void FASTCALL(__up_write(struct rw_semaphore *sem));
extern void FASTCALL(__downgrade_write(struct rw_semaphore *sem));
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->activity != 0);
+}
+
#endif /* __KERNEL__ */
#endif /* _LINUX_RWSEM_SPINLOCK_H */
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 7f717e9..66ff545 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -1,14 +1,23 @@
#ifndef _LINUX_SCATTERLIST_H
#define _LINUX_SCATTERLIST_H
-static inline void sg_init_one(struct scatterlist *sg,
- u8 *buf, unsigned int buflen)
-{
- memset(sg, 0, sizeof(*sg));
+#include <asm/scatterlist.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+static inline void sg_set_buf(struct scatterlist *sg, void *buf,
+ unsigned int buflen)
+{
sg->page = virt_to_page(buf);
sg->offset = offset_in_page(buf);
sg->length = buflen;
}
+static inline void sg_init_one(struct scatterlist *sg, void *buf,
+ unsigned int buflen)
+{
+ memset(sg, 0, sizeof(*sg));
+ sg_set_buf(sg, buf, buflen);
+}
+
#endif /* _LINUX_SCATTERLIST_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 27519df..03b68a7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -249,6 +249,36 @@
extern void arch_unmap_area(struct mm_struct *, unsigned long);
extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long);
+#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+/*
+ * The mm counters are not protected by its page_table_lock,
+ * so must be incremented atomically.
+ */
+#ifdef ATOMIC64_INIT
+#define set_mm_counter(mm, member, value) atomic64_set(&(mm)->_##member, value)
+#define get_mm_counter(mm, member) ((unsigned long)atomic64_read(&(mm)->_##member))
+#define add_mm_counter(mm, member, value) atomic64_add(value, &(mm)->_##member)
+#define inc_mm_counter(mm, member) atomic64_inc(&(mm)->_##member)
+#define dec_mm_counter(mm, member) atomic64_dec(&(mm)->_##member)
+typedef atomic64_t mm_counter_t;
+#else /* !ATOMIC64_INIT */
+/*
+ * The counters wrap back to 0 at 2^32 * PAGE_SIZE,
+ * that is, at 16TB if using 4kB page size.
+ */
+#define set_mm_counter(mm, member, value) atomic_set(&(mm)->_##member, value)
+#define get_mm_counter(mm, member) ((unsigned long)atomic_read(&(mm)->_##member))
+#define add_mm_counter(mm, member, value) atomic_add(value, &(mm)->_##member)
+#define inc_mm_counter(mm, member) atomic_inc(&(mm)->_##member)
+#define dec_mm_counter(mm, member) atomic_dec(&(mm)->_##member)
+typedef atomic_t mm_counter_t;
+#endif /* !ATOMIC64_INIT */
+
+#else /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+/*
+ * The mm counters are protected by its page_table_lock,
+ * so can be incremented directly.
+ */
#define set_mm_counter(mm, member, value) (mm)->_##member = (value)
#define get_mm_counter(mm, member) ((mm)->_##member)
#define add_mm_counter(mm, member, value) (mm)->_##member += (value)
@@ -256,6 +286,20 @@
#define dec_mm_counter(mm, member) (mm)->_##member--
typedef unsigned long mm_counter_t;
+#endif /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+
+#define get_mm_rss(mm) \
+ (get_mm_counter(mm, file_rss) + get_mm_counter(mm, anon_rss))
+#define update_hiwater_rss(mm) do { \
+ unsigned long _rss = get_mm_rss(mm); \
+ if ((mm)->hiwater_rss < _rss) \
+ (mm)->hiwater_rss = _rss; \
+} while (0)
+#define update_hiwater_vm(mm) do { \
+ if ((mm)->hiwater_vm < (mm)->total_vm) \
+ (mm)->hiwater_vm = (mm)->total_vm; \
+} while (0)
+
struct mm_struct {
struct vm_area_struct * mmap; /* list of VMAs */
struct rb_root mm_rb;
@@ -279,15 +323,20 @@
* by mmlist_lock
*/
+ /* Special counters, in some configurations protected by the
+ * page_table_lock, in other configurations by being atomic.
+ */
+ mm_counter_t _file_rss;
+ mm_counter_t _anon_rss;
+
+ unsigned long hiwater_rss; /* High-watermark of RSS usage */
+ unsigned long hiwater_vm; /* High-water virtual memory usage */
+
+ unsigned long total_vm, locked_vm, shared_vm, exec_vm;
+ unsigned long stack_vm, reserved_vm, def_flags, nr_ptes;
unsigned long start_code, end_code, start_data, end_data;
unsigned long start_brk, brk, start_stack;
unsigned long arg_start, arg_end, env_start, env_end;
- unsigned long total_vm, locked_vm, shared_vm;
- unsigned long exec_vm, stack_vm, reserved_vm, def_flags, nr_ptes;
-
- /* Special counters protected by the page_table_lock */
- mm_counter_t _rss;
- mm_counter_t _anon_rss;
unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
@@ -308,11 +357,7 @@
/* aio bits */
rwlock_t ioctx_list_lock;
struct kioctx *ioctx_list;
-
struct kioctx default_kioctx;
-
- unsigned long hiwater_rss; /* High-water RSS usage */
- unsigned long hiwater_vm; /* High-water virtual memory usage */
};
struct sighand_struct {
@@ -895,7 +940,7 @@
#else
static inline int set_cpus_allowed(task_t *p, cpumask_t new_mask)
{
- if (!cpus_intersects(new_mask, cpu_online_map))
+ if (!cpu_isset(0, new_mask))
return -EINVAL;
return 0;
}
@@ -1039,6 +1084,11 @@
#define SEND_SIG_PRIV ((struct siginfo *) 1)
#define SEND_SIG_FORCED ((struct siginfo *) 2)
+static inline int is_si_special(const struct siginfo *info)
+{
+ return info <= SEND_SIG_FORCED;
+}
+
/* True if we are on the alternate signal stack. */
static inline int on_sig_stack(unsigned long sp)
@@ -1166,7 +1216,7 @@
/*
* Protects ->fs, ->files, ->mm, ->ptrace, ->group_info, ->comm, keyring
* subscriptions and synchronises with wait4(). Also used in procfs. Also
- * pins the final release of task.io_context.
+ * pins the final release of task.io_context. Also protects ->cpuset.
*
* Nests both inside and outside of read_lock(&tasklist_lock).
* It must not be nested with write_lock_irq(&tasklist_lock),
diff --git a/include/linux/sdladrv.h b/include/linux/sdladrv.h
index 78f6340..c85e103 100644
--- a/include/linux/sdladrv.h
+++ b/include/linux/sdladrv.h
@@ -52,12 +52,8 @@
extern int sdla_setup (sdlahw_t* hw, void* sfm, unsigned len);
extern int sdla_down (sdlahw_t* hw);
-extern int sdla_inten (sdlahw_t* hw);
-extern int sdla_intde (sdlahw_t* hw);
-extern int sdla_intack (sdlahw_t* hw);
extern void S514_intack (sdlahw_t* hw, u32 int_status);
extern void read_S514_int_stat (sdlahw_t* hw, u32* int_status);
-extern int sdla_intr (sdlahw_t* hw);
extern int sdla_mapmem (sdlahw_t* hw, unsigned long addr);
extern int sdla_peek (sdlahw_t* hw, unsigned long addr, void* buf,
unsigned len);
diff --git a/include/linux/security.h b/include/linux/security.h
index 627382e..f7e0ae0 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -30,6 +30,7 @@
#include <linux/shm.h>
#include <linux/msg.h>
#include <linux/sched.h>
+#include <linux/key.h>
struct ctl_table;
@@ -385,6 +386,9 @@
* NULL to request the size of the buffer required. @size indicates
* the size of @buffer in bytes. Note that @name is the remainder
* of the attribute name after the security. prefix has been removed.
+ * @err is the return value from the preceding fs getxattr call,
+ * and can be used by the security module to determine whether it
+ * should try and canonicalize the attribute value.
* Return number of bytes used/required on success.
* @inode_setsecurity:
* Set the security label associated with @name for @inode from the
@@ -785,6 +789,27 @@
* @sk_free_security:
* Deallocate security structure.
*
+ * Security hooks affecting all Key Management operations
+ *
+ * @key_alloc:
+ * Permit allocation of a key and assign security data. Note that key does
+ * not have a serial number assigned at this point.
+ * @key points to the key.
+ * Return 0 if permission is granted, -ve error otherwise.
+ * @key_free:
+ * Notification of destruction; free security data.
+ * @key points to the key.
+ * No return value.
+ * @key_permission:
+ * See whether a specific operational right is granted to a process on a
+ * key.
+ * @key_ref refers to the key (key pointer + possession attribute bit).
+ * @context points to the process to provide the context against which to
+ * evaluate the security data on the key.
+ * @perm describes the combination of permissions required of this key.
+ * Return 1 if permission granted, 0 if permission denied and -ve it the
+ * normal permissions model should be effected.
+ *
* Security hooks affecting all System V IPC operations.
*
* @ipc_permission:
@@ -1091,7 +1116,7 @@
int (*inode_getxattr) (struct dentry *dentry, char *name);
int (*inode_listxattr) (struct dentry *dentry);
int (*inode_removexattr) (struct dentry *dentry, char *name);
- int (*inode_getsecurity)(struct inode *inode, const char *name, void *buffer, size_t size);
+ int (*inode_getsecurity)(struct inode *inode, const char *name, void *buffer, size_t size, int err);
int (*inode_setsecurity)(struct inode *inode, const char *name, const void *value, size_t size, int flags);
int (*inode_listsecurity)(struct inode *inode, char *buffer, size_t buffer_size);
@@ -1210,9 +1235,20 @@
int (*socket_shutdown) (struct socket * sock, int how);
int (*socket_sock_rcv_skb) (struct sock * sk, struct sk_buff * skb);
int (*socket_getpeersec) (struct socket *sock, char __user *optval, int __user *optlen, unsigned len);
- int (*sk_alloc_security) (struct sock *sk, int family, int priority);
+ int (*sk_alloc_security) (struct sock *sk, int family, gfp_t priority);
void (*sk_free_security) (struct sock *sk);
#endif /* CONFIG_SECURITY_NETWORK */
+
+ /* key management security hooks */
+#ifdef CONFIG_KEYS
+ int (*key_alloc)(struct key *key);
+ void (*key_free)(struct key *key);
+ int (*key_permission)(key_ref_t key_ref,
+ struct task_struct *context,
+ key_perm_t perm);
+
+#endif /* CONFIG_KEYS */
+
};
/* global variables */
@@ -1580,11 +1616,11 @@
return security_ops->inode_removexattr (dentry, name);
}
-static inline int security_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size)
+static inline int security_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size, int err)
{
if (unlikely (IS_PRIVATE (inode)))
return 0;
- return security_ops->inode_getsecurity(inode, name, buffer, size);
+ return security_ops->inode_getsecurity(inode, name, buffer, size, err);
}
static inline int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags)
@@ -2222,7 +2258,7 @@
return cap_inode_removexattr(dentry, name);
}
-static inline int security_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size)
+static inline int security_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size, int err)
{
return -EOPNOTSUPP;
}
@@ -2761,5 +2797,45 @@
}
#endif /* CONFIG_SECURITY_NETWORK */
+#ifdef CONFIG_KEYS
+#ifdef CONFIG_SECURITY
+static inline int security_key_alloc(struct key *key)
+{
+ return security_ops->key_alloc(key);
+}
+
+static inline void security_key_free(struct key *key)
+{
+ security_ops->key_free(key);
+}
+
+static inline int security_key_permission(key_ref_t key_ref,
+ struct task_struct *context,
+ key_perm_t perm)
+{
+ return security_ops->key_permission(key_ref, context, perm);
+}
+
+#else
+
+static inline int security_key_alloc(struct key *key)
+{
+ return 0;
+}
+
+static inline void security_key_free(struct key *key)
+{
+}
+
+static inline int security_key_permission(key_ref_t key_ref,
+ struct task_struct *context,
+ key_perm_t perm)
+{
+ return 0;
+}
+
+#endif
+#endif /* CONFIG_KEYS */
+
#endif /* ! __LINUX_SECURITY_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 12cd9cf..33fc8cb 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -11,6 +11,7 @@
#define _LINUX_SERIAL_H
#ifdef __KERNEL__
+#include <linux/types.h>
#include <asm/page.h>
/*
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 27db8da..2b0401b 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -39,7 +39,8 @@
#define PORT_RSA 13
#define PORT_NS16550A 14
#define PORT_XSCALE 15
-#define PORT_MAX_8250 15 /* max port ID */
+#define PORT_IP3106 16
+#define PORT_MAX_8250 16 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
diff --git a/include/linux/serial_ip3106.h b/include/linux/serial_ip3106.h
new file mode 100644
index 0000000..f500ac6
--- /dev/null
+++ b/include/linux/serial_ip3106.h
@@ -0,0 +1,81 @@
+/*
+ * Embedded Alley Solutions, source@embeddedalley.com.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _LINUX_SERIAL_IP3106_H
+#define _LINUX_SERIAL_IP3106_H
+
+#include <linux/serial_core.h>
+#include <linux/device.h>
+
+#define IP3106_NR_PORTS 2
+
+struct ip3106_port {
+ struct uart_port port;
+ struct timer_list timer;
+ unsigned int old_status;
+};
+
+/* register offsets */
+#define IP3106_LCR 0
+#define IP3106_MCR 0x004
+#define IP3106_BAUD 0x008
+#define IP3106_CFG 0x00c
+#define IP3106_FIFO 0x028
+#define IP3106_ISTAT 0xfe0
+#define IP3106_IEN 0xfe4
+#define IP3106_ICLR 0xfe8
+#define IP3106_ISET 0xfec
+#define IP3106_PD 0xff4
+#define IP3106_MID 0xffc
+
+#define IP3106_UART_LCR_TXBREAK (1<<30)
+#define IP3106_UART_LCR_PAREVN 0x10000000
+#define IP3106_UART_LCR_PAREN 0x08000000
+#define IP3106_UART_LCR_2STOPB 0x04000000
+#define IP3106_UART_LCR_8BIT 0x01000000
+#define IP3106_UART_LCR_TX_RST 0x00040000
+#define IP3106_UART_LCR_RX_RST 0x00020000
+#define IP3106_UART_LCR_RX_NEXT 0x00010000
+
+#define IP3106_UART_MCR_SCR 0xFF000000
+#define IP3106_UART_MCR_DCD 0x00800000
+#define IP3106_UART_MCR_CTS 0x00100000
+#define IP3106_UART_MCR_LOOP 0x00000010
+#define IP3106_UART_MCR_RTS 0x00000002
+#define IP3106_UART_MCR_DTR 0x00000001
+
+#define IP3106_UART_INT_TX 0x00000080
+#define IP3106_UART_INT_EMPTY 0x00000040
+#define IP3106_UART_INT_RCVTO 0x00000020
+#define IP3106_UART_INT_RX 0x00000010
+#define IP3106_UART_INT_RXOVRN 0x00000008
+#define IP3106_UART_INT_FRERR 0x00000004
+#define IP3106_UART_INT_BREAK 0x00000002
+#define IP3106_UART_INT_PARITY 0x00000001
+#define IP3106_UART_INT_ALLRX 0x0000003F
+#define IP3106_UART_INT_ALLTX 0x000000C0
+
+#define IP3106_UART_FIFO_TXFIFO 0x001F0000
+#define IP3106_UART_FIFO_TXFIFO_STA (0x1f<<16)
+#define IP3106_UART_FIFO_RXBRK 0x00008000
+#define IP3106_UART_FIFO_RXFE 0x00004000
+#define IP3106_UART_FIFO_RXPAR 0x00002000
+#define IP3106_UART_FIFO_RXFIFO 0x00001F00
+#define IP3106_UART_FIFO_RBRTHR 0x000000FF
+
+#endif
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 7be18b5..5dd5f02 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -25,7 +25,6 @@
struct sigqueue {
struct list_head list;
- spinlock_t *lock;
int flags;
siginfo_t info;
struct user_struct *user;
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 8f5d9e7..4286d83 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -137,6 +137,8 @@
unsigned int nr_frags;
unsigned short tso_size;
unsigned short tso_segs;
+ unsigned short ufo_size;
+ unsigned int ip6_frag_id;
struct sk_buff *frag_list;
skb_frag_t frags[MAX_SKB_FRAGS];
};
@@ -171,7 +173,6 @@
* struct sk_buff - socket buffer
* @next: Next buffer in list
* @prev: Previous buffer in list
- * @list: List we are on
* @sk: Socket we are owned by
* @tstamp: Time we arrived
* @dev: Device we arrived on/are leaving by
@@ -190,6 +191,7 @@
* @cloned: Head may be cloned (check refcnt to be sure)
* @nohdr: Payload reference only, must not modify header
* @pkt_type: Packet class
+ * @fclone: skbuff clone status
* @ip_summed: Driver fed us an IP checksum
* @priority: Packet queueing priority
* @users: User count - see {datagram,tcp}.c
@@ -202,6 +204,7 @@
* @destructor: Destruct function
* @nfmark: Can be used for communication between hooks
* @nfct: Associated connection, if any
+ * @ipvs_property: skbuff is owned by ipvs
* @nfctinfo: Relationship of this skb to the connection
* @nf_bridge: Saved data about a bridged frame - see br_netfilter.c
* @tc_index: Traffic control index
@@ -340,6 +343,11 @@
extern void skb_under_panic(struct sk_buff *skb, int len,
void *here);
+extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
+ int getfrag(void *from, char *to, int offset,
+ int len,int odd, struct sk_buff *skb),
+ void *from, int length);
+
struct skb_seq_state
{
__u32 lower_offset;
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 5fc04a1..09b9aa6 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -121,7 +121,7 @@
extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node);
extern void *kmalloc_node(size_t size, gfp_t flags, int node);
#else
-static inline void *kmem_cache_alloc_node(kmem_cache_t *cachep, int flags, int node)
+static inline void *kmem_cache_alloc_node(kmem_cache_t *cachep, gfp_t flags, int node)
{
return kmem_cache_alloc(cachep, flags);
}
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index cdc99a2..0e9682c 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -171,23 +171,42 @@
#define write_lock_irq(lock) _write_lock_irq(lock)
#define write_lock_bh(lock) _write_lock_bh(lock)
-#define spin_unlock(lock) _spin_unlock(lock)
-#define write_unlock(lock) _write_unlock(lock)
-#define read_unlock(lock) _read_unlock(lock)
+/*
+ * We inline the unlock functions in the nondebug case:
+ */
+#if defined(CONFIG_DEBUG_SPINLOCK) || defined(CONFIG_PREEMPT) || !defined(CONFIG_SMP)
+# define spin_unlock(lock) _spin_unlock(lock)
+# define read_unlock(lock) _read_unlock(lock)
+# define write_unlock(lock) _write_unlock(lock)
+#else
+# define spin_unlock(lock) __raw_spin_unlock(&(lock)->raw_lock)
+# define read_unlock(lock) __raw_read_unlock(&(lock)->raw_lock)
+# define write_unlock(lock) __raw_write_unlock(&(lock)->raw_lock)
+#endif
+
+#if defined(CONFIG_DEBUG_SPINLOCK) || defined(CONFIG_PREEMPT) || !defined(CONFIG_SMP)
+# define spin_unlock_irq(lock) _spin_unlock_irq(lock)
+# define read_unlock_irq(lock) _read_unlock_irq(lock)
+# define write_unlock_irq(lock) _write_unlock_irq(lock)
+#else
+# define spin_unlock_irq(lock) \
+ do { __raw_spin_unlock(&(lock)->raw_lock); local_irq_enable(); } while (0)
+# define read_unlock_irq(lock) \
+ do { __raw_read_unlock(&(lock)->raw_lock); local_irq_enable(); } while (0)
+# define write_unlock_irq(lock) \
+ do { __raw_write_unlock(&(lock)->raw_lock); local_irq_enable(); } while (0)
+#endif
#define spin_unlock_irqrestore(lock, flags) \
_spin_unlock_irqrestore(lock, flags)
-#define spin_unlock_irq(lock) _spin_unlock_irq(lock)
#define spin_unlock_bh(lock) _spin_unlock_bh(lock)
#define read_unlock_irqrestore(lock, flags) \
_read_unlock_irqrestore(lock, flags)
-#define read_unlock_irq(lock) _read_unlock_irq(lock)
#define read_unlock_bh(lock) _read_unlock_bh(lock)
#define write_unlock_irqrestore(lock, flags) \
_write_unlock_irqrestore(lock, flags)
-#define write_unlock_irq(lock) _write_unlock_irq(lock)
#define write_unlock_bh(lock) _write_unlock_bh(lock)
#define spin_trylock_bh(lock) __cond_lock(_spin_trylock_bh(lock))
diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h
index 04ebc24..b68c11a 100644
--- a/include/linux/sunrpc/auth.h
+++ b/include/linux/sunrpc/auth.h
@@ -66,7 +66,12 @@
struct rpc_auth {
unsigned int au_cslack; /* call cred size estimate */
- unsigned int au_rslack; /* reply verf size guess */
+ /* guess at number of u32's auth adds before
+ * reply data; normally the verifier size: */
+ unsigned int au_rslack;
+ /* for gss, used to calculate au_rslack: */
+ unsigned int au_verfsize;
+
unsigned int au_flags; /* various flags */
struct rpc_authops * au_ops; /* operations */
rpc_authflavor_t au_flavor; /* pseudoflavor (note may
diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h
index eadb31e..1a42d90 100644
--- a/include/linux/sunrpc/debug.h
+++ b/include/linux/sunrpc/debug.h
@@ -32,6 +32,7 @@
#define RPCDBG_AUTH 0x0010
#define RPCDBG_PMAP 0x0020
#define RPCDBG_SCHED 0x0040
+#define RPCDBG_TRANS 0x0080
#define RPCDBG_SVCSOCK 0x0100
#define RPCDBG_SVCDSP 0x0200
#define RPCDBG_MISC 0x0400
@@ -94,6 +95,8 @@
CTL_NLMDEBUG,
CTL_SLOTTABLE_UDP,
CTL_SLOTTABLE_TCP,
+ CTL_MIN_RESVPORT,
+ CTL_MAX_RESVPORT,
};
#endif /* _LINUX_SUNRPC_DEBUG_H_ */
diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h
index 689262f..9b8bcf1 100644
--- a/include/linux/sunrpc/gss_api.h
+++ b/include/linux/sunrpc/gss_api.h
@@ -40,14 +40,21 @@
struct gss_ctx **ctx_id);
u32 gss_get_mic(
struct gss_ctx *ctx_id,
- u32 qop,
struct xdr_buf *message,
struct xdr_netobj *mic_token);
u32 gss_verify_mic(
struct gss_ctx *ctx_id,
struct xdr_buf *message,
- struct xdr_netobj *mic_token,
- u32 *qstate);
+ struct xdr_netobj *mic_token);
+u32 gss_wrap(
+ struct gss_ctx *ctx_id,
+ int offset,
+ struct xdr_buf *outbuf,
+ struct page **inpages);
+u32 gss_unwrap(
+ struct gss_ctx *ctx_id,
+ int offset,
+ struct xdr_buf *inbuf);
u32 gss_delete_sec_context(
struct gss_ctx **ctx_id);
@@ -56,7 +63,6 @@
struct pf_desc {
u32 pseudoflavor;
- u32 qop;
u32 service;
char *name;
char *auth_domain_name;
@@ -85,14 +91,21 @@
struct gss_ctx *ctx_id);
u32 (*gss_get_mic)(
struct gss_ctx *ctx_id,
- u32 qop,
struct xdr_buf *message,
struct xdr_netobj *mic_token);
u32 (*gss_verify_mic)(
struct gss_ctx *ctx_id,
struct xdr_buf *message,
- struct xdr_netobj *mic_token,
- u32 *qstate);
+ struct xdr_netobj *mic_token);
+ u32 (*gss_wrap)(
+ struct gss_ctx *ctx_id,
+ int offset,
+ struct xdr_buf *outbuf,
+ struct page **inpages);
+ u32 (*gss_unwrap)(
+ struct gss_ctx *ctx_id,
+ int offset,
+ struct xdr_buf *buf);
void (*gss_delete_sec_context)(
void *internal_ctx_id);
};
diff --git a/include/linux/sunrpc/gss_err.h b/include/linux/sunrpc/gss_err.h
index 92608a2..a680786 100644
--- a/include/linux/sunrpc/gss_err.h
+++ b/include/linux/sunrpc/gss_err.h
@@ -66,16 +66,6 @@
/*
- * Define the default Quality of Protection for per-message services. Note
- * that an implementation that offers multiple levels of QOP may either reserve
- * a value (for example zero, as assumed here) to mean "default protection", or
- * alternatively may simply equate GSS_C_QOP_DEFAULT to a specific explicit
- * QOP value. However a value of 0 should always be interpreted by a GSSAPI
- * implementation as a request for the default protection level.
- */
-#define GSS_C_QOP_DEFAULT 0
-
-/*
* Expiration time of 2^32-1 seconds means infinite lifetime for a
* credential or security context
*/
diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h
index ffe31d2..2c3601d 100644
--- a/include/linux/sunrpc/gss_krb5.h
+++ b/include/linux/sunrpc/gss_krb5.h
@@ -116,18 +116,22 @@
s32
make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body,
- struct xdr_netobj *cksum);
+ int body_offset, struct xdr_netobj *cksum);
+
+u32 gss_get_mic_kerberos(struct gss_ctx *, struct xdr_buf *,
+ struct xdr_netobj *);
+
+u32 gss_verify_mic_kerberos(struct gss_ctx *, struct xdr_buf *,
+ struct xdr_netobj *);
u32
-krb5_make_token(struct krb5_ctx *context_handle, int qop_req,
- struct xdr_buf *input_message_buffer,
- struct xdr_netobj *output_message_buffer, int toktype);
+gss_wrap_kerberos(struct gss_ctx *ctx_id, int offset,
+ struct xdr_buf *outbuf, struct page **pages);
u32
-krb5_read_token(struct krb5_ctx *context_handle,
- struct xdr_netobj *input_token_buffer,
- struct xdr_buf *message_buffer,
- int *qop_state, int toktype);
+gss_unwrap_kerberos(struct gss_ctx *ctx_id, int offset,
+ struct xdr_buf *buf);
+
u32
krb5_encrypt(struct crypto_tfm * key,
@@ -137,6 +141,13 @@
krb5_decrypt(struct crypto_tfm * key,
void *iv, void *in, void *out, int length);
+int
+gss_encrypt_xdr_buf(struct crypto_tfm *tfm, struct xdr_buf *outbuf, int offset,
+ struct page **pages);
+
+int
+gss_decrypt_xdr_buf(struct crypto_tfm *tfm, struct xdr_buf *inbuf, int offset);
+
s32
krb5_make_seq_num(struct crypto_tfm * key,
int direction,
diff --git a/include/linux/sunrpc/gss_spkm3.h b/include/linux/sunrpc/gss_spkm3.h
index b5c9968..0beb2cf 100644
--- a/include/linux/sunrpc/gss_spkm3.h
+++ b/include/linux/sunrpc/gss_spkm3.h
@@ -41,9 +41,9 @@
#define SPKM_WRAP_TOK 5
#define SPKM_DEL_TOK 6
-u32 spkm3_make_token(struct spkm3_ctx *ctx, int qop_req, struct xdr_buf * text, struct xdr_netobj * token, int toktype);
+u32 spkm3_make_token(struct spkm3_ctx *ctx, struct xdr_buf * text, struct xdr_netobj * token, int toktype);
-u32 spkm3_read_token(struct spkm3_ctx *ctx, struct xdr_netobj *read_token, struct xdr_buf *message_buffer, int *qop_state, int toktype);
+u32 spkm3_read_token(struct spkm3_ctx *ctx, struct xdr_netobj *read_token, struct xdr_buf *message_buffer, int toktype);
#define CKSUMTYPE_RSA_MD5 0x0007
diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h
index 15f1153..f43f237 100644
--- a/include/linux/sunrpc/msg_prot.h
+++ b/include/linux/sunrpc/msg_prot.h
@@ -76,5 +76,30 @@
#define RPC_MAXNETNAMELEN 256
+/*
+ * From RFC 1831:
+ *
+ * "A record is composed of one or more record fragments. A record
+ * fragment is a four-byte header followed by 0 to (2**31) - 1 bytes of
+ * fragment data. The bytes encode an unsigned binary number; as with
+ * XDR integers, the byte order is from highest to lowest. The number
+ * encodes two values -- a boolean which indicates whether the fragment
+ * is the last fragment of the record (bit value 1 implies the fragment
+ * is the last fragment) and a 31-bit unsigned binary value which is the
+ * length in bytes of the fragment's data. The boolean value is the
+ * highest-order bit of the header; the length is the 31 low-order bits.
+ * (Note that this record specification is NOT in XDR standard form!)"
+ *
+ * The Linux RPC client always sends its requests in a single record
+ * fragment, limiting the maximum payload size for stream transports to
+ * 2GB.
+ */
+
+typedef u32 rpc_fraghdr;
+
+#define RPC_LAST_STREAM_FRAGMENT (1U << 31)
+#define RPC_FRAGMENT_SIZE_MASK (~RPC_LAST_STREAM_FRAGMENT)
+#define RPC_MAX_FRAGMENT_SIZE ((1U << 31) - 1)
+
#endif /* __KERNEL__ */
#endif /* _LINUX_SUNRPC_MSGPROT_H_ */
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index 23448d0..5da9687 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -161,14 +161,10 @@
typedef size_t (*skb_read_actor_t)(skb_reader_t *desc, void *to, size_t len);
+extern int csum_partial_copy_to_xdr(struct xdr_buf *, struct sk_buff *);
extern ssize_t xdr_partial_copy_from_skb(struct xdr_buf *, unsigned int,
skb_reader_t *, skb_read_actor_t);
-struct socket;
-struct sockaddr;
-extern int xdr_sendpages(struct socket *, struct sockaddr *, int,
- struct xdr_buf *, unsigned int, int);
-
extern int xdr_encode_word(struct xdr_buf *, int, u32);
extern int xdr_decode_word(struct xdr_buf *, int, u32 *);
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index e618c16..3b8b6e8 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -1,5 +1,5 @@
/*
- * linux/include/linux/sunrpc/clnt_xprt.h
+ * linux/include/linux/sunrpc/xprt.h
*
* Declarations for the RPC transport interface.
*
@@ -15,20 +15,6 @@
#include <linux/sunrpc/sched.h>
#include <linux/sunrpc/xdr.h>
-/*
- * The transport code maintains an estimate on the maximum number of out-
- * standing RPC requests, using a smoothed version of the congestion
- * avoidance implemented in 44BSD. This is basically the Van Jacobson
- * congestion algorithm: If a retransmit occurs, the congestion window is
- * halved; otherwise, it is incremented by 1/cwnd when
- *
- * - a reply is received and
- * - a full number of requests are outstanding and
- * - the congestion window hasn't been updated recently.
- *
- * Upper procedures may check whether a request would block waiting for
- * a free RPC slot by using the RPC_CONGESTED() macro.
- */
extern unsigned int xprt_udp_slot_table_entries;
extern unsigned int xprt_tcp_slot_table_entries;
@@ -36,36 +22,25 @@
#define RPC_DEF_SLOT_TABLE (16U)
#define RPC_MAX_SLOT_TABLE (128U)
-#define RPC_CWNDSHIFT (8U)
-#define RPC_CWNDSCALE (1U << RPC_CWNDSHIFT)
-#define RPC_INITCWND RPC_CWNDSCALE
-#define RPC_MAXCWND(xprt) ((xprt)->max_reqs << RPC_CWNDSHIFT)
-#define RPCXPRT_CONGESTED(xprt) ((xprt)->cong >= (xprt)->cwnd)
-
-/* Default timeout values */
-#define RPC_MAX_UDP_TIMEOUT (60*HZ)
-#define RPC_MAX_TCP_TIMEOUT (600*HZ)
-
/*
- * Wait duration for an RPC TCP connection to be established. Solaris
- * NFS over TCP uses 60 seconds, for example, which is in line with how
- * long a server takes to reboot.
- */
-#define RPC_CONNECT_TIMEOUT (60*HZ)
-
-/*
- * Delay an arbitrary number of seconds before attempting to reconnect
- * after an error.
- */
-#define RPC_REESTABLISH_TIMEOUT (15*HZ)
-
-/* RPC call and reply header size as number of 32bit words (verifier
+ * RPC call and reply header size as number of 32bit words (verifier
* size computed separately)
*/
#define RPC_CALLHDRSIZE 6
#define RPC_REPHDRSIZE 4
/*
+ * Parameters for choosing a free port
+ */
+extern unsigned int xprt_min_resvport;
+extern unsigned int xprt_max_resvport;
+
+#define RPC_MIN_RESVPORT (1U)
+#define RPC_MAX_RESVPORT (65535U)
+#define RPC_DEF_MIN_RESVPORT (650U)
+#define RPC_DEF_MAX_RESVPORT (1023U)
+
+/*
* This describes a timeout strategy
*/
struct rpc_timeout {
@@ -76,6 +51,9 @@
unsigned char to_exponential;
};
+struct rpc_task;
+struct rpc_xprt;
+
/*
* This describes a complete RPC request
*/
@@ -95,7 +73,10 @@
int rq_cong; /* has incremented xprt->cong */
int rq_received; /* receive completed */
u32 rq_seqno; /* gss seq no. used on req. */
-
+ int rq_enc_pages_num;
+ struct page **rq_enc_pages; /* scratch pages for use by
+ gss privacy code */
+ void (*rq_release_snd_buf)(struct rpc_rqst *); /* release rq_enc_pages */
struct list_head rq_list;
struct xdr_buf rq_private_buf; /* The receive buffer
@@ -121,12 +102,21 @@
#define rq_svec rq_snd_buf.head
#define rq_slen rq_snd_buf.len
-#define XPRT_LAST_FRAG (1 << 0)
-#define XPRT_COPY_RECM (1 << 1)
-#define XPRT_COPY_XID (1 << 2)
-#define XPRT_COPY_DATA (1 << 3)
+struct rpc_xprt_ops {
+ void (*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize);
+ int (*reserve_xprt)(struct rpc_task *task);
+ void (*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
+ void (*connect)(struct rpc_task *task);
+ int (*send_request)(struct rpc_task *task);
+ void (*set_retrans_timeout)(struct rpc_task *task);
+ void (*timer)(struct rpc_task *task);
+ void (*release_request)(struct rpc_task *task);
+ void (*close)(struct rpc_xprt *xprt);
+ void (*destroy)(struct rpc_xprt *xprt);
+};
struct rpc_xprt {
+ struct rpc_xprt_ops * ops; /* transport methods */
struct socket * sock; /* BSD socket layer */
struct sock * inet; /* INET layer */
@@ -137,11 +127,13 @@
unsigned long cong; /* current congestion */
unsigned long cwnd; /* congestion window */
- unsigned int rcvsize, /* socket receive buffer size */
- sndsize; /* socket send buffer size */
+ size_t rcvsize, /* transport rcv buffer size */
+ sndsize; /* transport send buffer size */
size_t max_payload; /* largest RPC payload size,
in bytes */
+ unsigned int tsh_size; /* size of transport specific
+ header */
struct rpc_wait_queue sending; /* requests waiting to send */
struct rpc_wait_queue resend; /* requests waiting to resend */
@@ -150,11 +142,9 @@
struct list_head free; /* free slots */
struct rpc_rqst * slot; /* slot table storage */
unsigned int max_reqs; /* total slots */
- unsigned long sockstate; /* Socket state */
+ unsigned long state; /* transport state */
unsigned char shutdown : 1, /* being shut down */
- nocong : 1, /* no congestion control */
- resvport : 1, /* use a reserved port */
- stream : 1; /* TCP */
+ resvport : 1; /* use a reserved port */
/*
* XID
@@ -171,22 +161,27 @@
unsigned long tcp_copied, /* copied to request */
tcp_flags;
/*
- * Connection of sockets
+ * Connection of transports
*/
- struct work_struct sock_connect;
+ unsigned long connect_timeout,
+ bind_timeout,
+ reestablish_timeout;
+ struct work_struct connect_worker;
unsigned short port;
+
/*
- * Disconnection of idle sockets
+ * Disconnection of idle transports
*/
struct work_struct task_cleanup;
struct timer_list timer;
- unsigned long last_used;
+ unsigned long last_used,
+ idle_timeout;
/*
* Send stuff
*/
- spinlock_t sock_lock; /* lock socket info */
- spinlock_t xprt_lock; /* lock xprt info */
+ spinlock_t transport_lock; /* lock transport info */
+ spinlock_t reserve_lock; /* lock slot table */
struct rpc_task * snd_task; /* Task blocked in send */
struct list_head recv;
@@ -195,37 +190,111 @@
void (*old_data_ready)(struct sock *, int);
void (*old_state_change)(struct sock *);
void (*old_write_space)(struct sock *);
-
- wait_queue_head_t cong_wait;
};
+#define XPRT_LAST_FRAG (1 << 0)
+#define XPRT_COPY_RECM (1 << 1)
+#define XPRT_COPY_XID (1 << 2)
+#define XPRT_COPY_DATA (1 << 3)
+
#ifdef __KERNEL__
-struct rpc_xprt * xprt_create_proto(int proto, struct sockaddr_in *addr,
- struct rpc_timeout *toparms);
-int xprt_destroy(struct rpc_xprt *);
-void xprt_set_timeout(struct rpc_timeout *, unsigned int,
- unsigned long);
+/*
+ * Transport operations used by ULPs
+ */
+struct rpc_xprt * xprt_create_proto(int proto, struct sockaddr_in *addr, struct rpc_timeout *to);
+void xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr);
-void xprt_reserve(struct rpc_task *);
-int xprt_prepare_transmit(struct rpc_task *);
-void xprt_transmit(struct rpc_task *);
-void xprt_receive(struct rpc_task *);
+/*
+ * Generic internal transport functions
+ */
+void xprt_connect(struct rpc_task *task);
+void xprt_reserve(struct rpc_task *task);
+int xprt_reserve_xprt(struct rpc_task *task);
+int xprt_reserve_xprt_cong(struct rpc_task *task);
+int xprt_prepare_transmit(struct rpc_task *task);
+void xprt_transmit(struct rpc_task *task);
+void xprt_abort_transmit(struct rpc_task *task);
int xprt_adjust_timeout(struct rpc_rqst *req);
-void xprt_release(struct rpc_task *);
-void xprt_connect(struct rpc_task *);
-void xprt_sock_setbufsize(struct rpc_xprt *);
+void xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
+void xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
+void xprt_release(struct rpc_task *task);
+int xprt_destroy(struct rpc_xprt *xprt);
-#define XPRT_LOCKED 0
-#define XPRT_CONNECT 1
-#define XPRT_CONNECTING 2
+static inline u32 *xprt_skip_transport_header(struct rpc_xprt *xprt, u32 *p)
+{
+ return p + xprt->tsh_size;
+}
-#define xprt_connected(xp) (test_bit(XPRT_CONNECT, &(xp)->sockstate))
-#define xprt_set_connected(xp) (set_bit(XPRT_CONNECT, &(xp)->sockstate))
-#define xprt_test_and_set_connected(xp) (test_and_set_bit(XPRT_CONNECT, &(xp)->sockstate))
-#define xprt_test_and_clear_connected(xp) \
- (test_and_clear_bit(XPRT_CONNECT, &(xp)->sockstate))
-#define xprt_clear_connected(xp) (clear_bit(XPRT_CONNECT, &(xp)->sockstate))
+/*
+ * Transport switch helper functions
+ */
+void xprt_set_retrans_timeout_def(struct rpc_task *task);
+void xprt_set_retrans_timeout_rtt(struct rpc_task *task);
+void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status);
+void xprt_wait_for_buffer_space(struct rpc_task *task);
+void xprt_write_space(struct rpc_xprt *xprt);
+void xprt_update_rtt(struct rpc_task *task);
+void xprt_adjust_cwnd(struct rpc_task *task, int result);
+struct rpc_rqst * xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid);
+void xprt_complete_rqst(struct rpc_task *task, int copied);
+void xprt_release_rqst_cong(struct rpc_task *task);
+void xprt_disconnect(struct rpc_xprt *xprt);
+
+/*
+ * Socket transport setup operations
+ */
+int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to);
+int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to);
+
+/*
+ * Reserved bit positions in xprt->state
+ */
+#define XPRT_LOCKED (0)
+#define XPRT_CONNECTED (1)
+#define XPRT_CONNECTING (2)
+
+static inline void xprt_set_connected(struct rpc_xprt *xprt)
+{
+ set_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline void xprt_clear_connected(struct rpc_xprt *xprt)
+{
+ clear_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline int xprt_connected(struct rpc_xprt *xprt)
+{
+ return test_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline int xprt_test_and_set_connected(struct rpc_xprt *xprt)
+{
+ return test_and_set_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline int xprt_test_and_clear_connected(struct rpc_xprt *xprt)
+{
+ return test_and_clear_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline void xprt_clear_connecting(struct rpc_xprt *xprt)
+{
+ smp_mb__before_clear_bit();
+ clear_bit(XPRT_CONNECTING, &xprt->state);
+ smp_mb__after_clear_bit();
+}
+
+static inline int xprt_connecting(struct rpc_xprt *xprt)
+{
+ return test_bit(XPRT_CONNECTING, &xprt->state);
+}
+
+static inline int xprt_test_and_set_connecting(struct rpc_xprt *xprt)
+{
+ return test_and_set_bit(XPRT_CONNECTING, &xprt->state);
+}
#endif /* __KERNEL__*/
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index ad15a54..a61c04f 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -71,7 +71,12 @@
struct saved_context;
void __save_processor_state(struct saved_context *ctxt);
void __restore_processor_state(struct saved_context *ctxt);
-extern unsigned long get_usable_page(unsigned gfp_mask);
-extern void free_eaten_memory(void);
+unsigned long get_safe_page(gfp_t gfp_mask);
+
+/*
+ * XXX: We try to keep some more pages free so that I/O operations succeed
+ * without paging. Might this be more?
+ */
+#define PAGES_FOR_IO 512
#endif /* _LINUX_SWSUSP_H */
diff --git a/include/linux/swap.h b/include/linux/swap.h
index a7bf1a3..20c9756 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -171,8 +171,8 @@
extern void swap_setup(void);
/* linux/mm/vmscan.c */
-extern int try_to_free_pages(struct zone **, unsigned int);
-extern int zone_reclaim(struct zone *, unsigned int, unsigned int);
+extern int try_to_free_pages(struct zone **, gfp_t);
+extern int zone_reclaim(struct zone *, gfp_t, unsigned int);
extern int shrink_all_memory(int);
extern int vm_swappiness;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a6f03e4..c7007b1 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -491,6 +491,7 @@
asmlinkage long sys_syslog(int type, char __user *buf, int len);
asmlinkage long sys_uselib(const char __user *library);
asmlinkage long sys_ni_syscall(void);
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data);
asmlinkage long sys_add_key(const char __user *_type,
const char __user *_description,
diff --git a/include/linux/textsearch.h b/include/linux/textsearch.h
index 515046d..7dac8f0 100644
--- a/include/linux/textsearch.h
+++ b/include/linux/textsearch.h
@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/slab.h>
struct ts_config;
@@ -40,7 +41,7 @@
struct ts_ops
{
const char *name;
- struct ts_config * (*init)(const void *, unsigned int, int);
+ struct ts_config * (*init)(const void *, unsigned int, gfp_t);
unsigned int (*find)(struct ts_config *,
struct ts_state *);
void (*destroy)(struct ts_config *);
@@ -148,7 +149,7 @@
extern int textsearch_register(struct ts_ops *);
extern int textsearch_unregister(struct ts_ops *);
extern struct ts_config *textsearch_prepare(const char *, const void *,
- unsigned int, int, int);
+ unsigned int, gfp_t, int);
extern void textsearch_destroy(struct ts_config *conf);
extern unsigned int textsearch_find_continuous(struct ts_config *,
struct ts_state *,
diff --git a/include/linux/timer.h b/include/linux/timer.h
index 3340f3b..72f3a77 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -12,16 +12,12 @@
struct list_head entry;
unsigned long expires;
- unsigned long magic;
-
void (*function)(unsigned long);
unsigned long data;
struct timer_base_s *base;
};
-#define TIMER_MAGIC 0x4b87ad6e
-
extern struct timer_base_s __init_timer_base;
#define TIMER_INITIALIZER(_function, _expires, _data) { \
@@ -29,7 +25,6 @@
.expires = (_expires), \
.data = (_data), \
.base = &__init_timer_base, \
- .magic = TIMER_MAGIC, \
}
#define DEFINE_TIMER(_name, _function, _expires, _data) \
@@ -38,6 +33,15 @@
void fastcall init_timer(struct timer_list * timer);
+static inline void setup_timer(struct timer_list * timer,
+ void (*function)(unsigned long),
+ unsigned long data)
+{
+ timer->function = function;
+ timer->data = data;
+ init_timer(timer);
+}
+
/***
* timer_pending - is a timer pending?
* @timer: the timer in question
@@ -74,8 +78,9 @@
* Timers with an ->expired field in the past will be executed in the next
* timer tick.
*/
-static inline void add_timer(struct timer_list * timer)
+static inline void add_timer(struct timer_list *timer)
{
+ BUG_ON(timer_pending(timer));
__mod_timer(timer, timer->expires);
}
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 7e050a2..04a4a8c 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -282,6 +282,13 @@
return !(time_status & STA_UNSYNC);
}
+/* Required to safely shift negative values */
+#define shift_right(x, s) ({ \
+ __typeof__(x) __x = (x); \
+ __typeof__(s) __s = (s); \
+ __x < 0 ? -(-__x >> __s) : __x >> __s; \
+})
+
#ifdef CONFIG_TIME_INTERPOLATION
diff --git a/include/linux/types.h b/include/linux/types.h
index 0aee34f..21b9ce8 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -151,7 +151,12 @@
*/
#ifdef __CHECKER__
-#define __bitwise __attribute__((bitwise))
+#define __bitwise__ __attribute__((bitwise))
+#else
+#define __bitwise__
+#endif
+#ifdef __CHECK_ENDIAN__
+#define __bitwise __bitwise__
#else
#define __bitwise
#endif
@@ -166,7 +171,7 @@
#endif
#ifdef __KERNEL__
-typedef unsigned __nocast gfp_t;
+typedef unsigned __bitwise__ gfp_t;
#endif
struct ustat {
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 4dbe580..748d043 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -57,6 +57,7 @@
struct usb_endpoint_descriptor desc;
struct list_head urb_list;
void *hcpriv;
+ struct kobject *kobj; /* For sysfs info */
unsigned char *extra; /* Extra descriptors */
int extralen;
@@ -136,7 +137,8 @@
* active alternate setting */
unsigned num_altsetting; /* number of alternate settings */
- int minor; /* minor number this interface is bound to */
+ int minor; /* minor number this interface is
+ * bound to */
enum usb_interface_condition condition; /* state of binding */
struct device dev; /* interface specific device info */
struct class_device *class_dev;
@@ -229,7 +231,7 @@
struct usb_host_config {
struct usb_config_descriptor desc;
- char *string;
+ char *string; /* iConfiguration string, if present */
/* the interfaces associated with this configuration,
* stored in no particular order */
struct usb_interface *interface[USB_MAXINTERFACES];
@@ -248,7 +250,7 @@
__usb_get_extra_descriptor((ifpoint)->extra,(ifpoint)->extralen,\
type,(void**)ptr)
-/* -------------------------------------------------------------------------- */
+/* ----------------------------------------------------------------------- */
struct usb_operations;
@@ -268,7 +270,8 @@
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
- int devnum_next; /* Next open device number in round-robin allocation */
+ int devnum_next; /* Next open device number in
+ * round-robin allocation */
struct usb_devmap devmap; /* device address allocation map */
struct usb_operations *op; /* Operations (specific to the HC) */
@@ -289,15 +292,16 @@
struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
struct class_device *class_dev; /* class device for this bus */
- struct kref kref; /* handles reference counting this bus */
- void (*release)(struct usb_bus *bus); /* function to destroy this bus's memory */
+ struct kref kref; /* reference counting for this bus */
+ void (*release)(struct usb_bus *bus);
+
#if defined(CONFIG_USB_MON)
struct mon_bus *mon_bus; /* non-null when associated */
int monitored; /* non-zero when monitored */
#endif
};
-/* -------------------------------------------------------------------------- */
+/* ----------------------------------------------------------------------- */
/* This is arbitrary.
* From USB 2.0 spec Table 11-13, offset 7, a hub can
@@ -326,7 +330,8 @@
struct semaphore serialize;
- unsigned int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */
+ unsigned int toggle[2]; /* one bit for each endpoint
+ * ([0] = IN, [1] = OUT) */
struct usb_device *parent; /* our hub, unless we're the root */
struct usb_bus *bus; /* Bus we're part of */
@@ -343,12 +348,14 @@
char **rawdescriptors; /* Raw descriptors for each config */
- int have_langid; /* whether string_langid is valid yet */
+ int have_langid; /* whether string_langid is valid */
int string_langid; /* language ID for strings */
- char *product;
- char *manufacturer;
- char *serial; /* static strings from the device */
+ /* static strings from the device */
+ char *product; /* iProduct string, if present */
+ char *manufacturer; /* iManufacturer string, if present */
+ char *serial; /* iSerialNumber string, if present */
+
struct list_head filelist;
struct class_device *class_dev;
struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
@@ -440,22 +447,31 @@
* USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are
* high speed, and a different one if they are full or low speed.
*/
-static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size)
+static inline int usb_make_path (struct usb_device *dev, char *buf,
+ size_t size)
{
int actual;
- actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, dev->devpath);
+ actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name,
+ dev->devpath);
return (actual >= (int)size) ? -1 : actual;
}
/*-------------------------------------------------------------------------*/
-#define USB_DEVICE_ID_MATCH_DEVICE (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
-#define USB_DEVICE_ID_MATCH_DEV_RANGE (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI)
-#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE)
+#define USB_DEVICE_ID_MATCH_DEVICE \
+ (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
+#define USB_DEVICE_ID_MATCH_DEV_RANGE \
+ (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI)
+#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
+ (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE)
#define USB_DEVICE_ID_MATCH_DEV_INFO \
- (USB_DEVICE_ID_MATCH_DEV_CLASS | USB_DEVICE_ID_MATCH_DEV_SUBCLASS | USB_DEVICE_ID_MATCH_DEV_PROTOCOL)
+ (USB_DEVICE_ID_MATCH_DEV_CLASS | \
+ USB_DEVICE_ID_MATCH_DEV_SUBCLASS | \
+ USB_DEVICE_ID_MATCH_DEV_PROTOCOL)
#define USB_DEVICE_ID_MATCH_INT_INFO \
- (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS | USB_DEVICE_ID_MATCH_INT_PROTOCOL)
+ (USB_DEVICE_ID_MATCH_INT_CLASS | \
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS | \
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL)
/**
* USB_DEVICE - macro used to describe a specific usb device
@@ -466,9 +482,11 @@
* specific device.
*/
#define USB_DEVICE(vend,prod) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), .idProduct = (prod)
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), \
+ .idProduct = (prod)
/**
- * USB_DEVICE_VER - macro used to describe a specific usb device with a version range
+ * USB_DEVICE_VER - macro used to describe a specific usb device with a
+ * version range
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
* @lo: the bcdDevice_lo value
@@ -478,7 +496,9 @@
* specific device, with a version range.
*/
#define USB_DEVICE_VER(vend,prod,lo,hi) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, .idVendor = (vend), .idProduct = (prod), .bcdDevice_lo = (lo), .bcdDevice_hi = (hi)
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, \
+ .idVendor = (vend), .idProduct = (prod), \
+ .bcdDevice_lo = (lo), .bcdDevice_hi = (hi)
/**
* USB_DEVICE_INFO - macro used to describe a class of usb devices
@@ -490,7 +510,8 @@
* specific class of devices.
*/
#define USB_DEVICE_INFO(cl,sc,pr) \
- .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), .bDeviceSubClass = (sc), .bDeviceProtocol = (pr)
+ .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), \
+ .bDeviceSubClass = (sc), .bDeviceProtocol = (pr)
/**
* USB_INTERFACE_INFO - macro used to describe a class of usb interfaces
@@ -502,9 +523,10 @@
* specific class of interfaces.
*/
#define USB_INTERFACE_INFO(cl,sc,pr) \
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr)
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), \
+ .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr)
-/* -------------------------------------------------------------------------- */
+/* ----------------------------------------------------------------------- */
/**
* struct usb_driver - identifies USB driver to usbcore
@@ -557,7 +579,8 @@
void (*disconnect) (struct usb_interface *intf);
- int (*ioctl) (struct usb_interface *intf, unsigned int code, void *buf);
+ int (*ioctl) (struct usb_interface *intf, unsigned int code,
+ void *buf);
int (*suspend) (struct usb_interface *intf, pm_message_t message);
int (*resume) (struct usb_interface *intf);
@@ -572,10 +595,8 @@
/**
* struct usb_class_driver - identifies a USB driver that wants to use the USB major number
- * @name: devfs name for this driver. Will also be used by the driver
- * class code to create a usb class device.
+ * @name: the usb class device name for this driver. Will show up in sysfs.
* @fops: pointer to the struct file_operations of this driver.
- * @mode: the mode for the devfs file to be created for this driver.
* @minor_base: the start of the minor range for this driver.
*
* This structure is used for the usb_register_dev() and
@@ -585,8 +606,7 @@
struct usb_class_driver {
char *name;
struct file_operations *fops;
- mode_t mode;
- int minor_base;
+ int minor_base;
};
/*
@@ -603,7 +623,7 @@
extern int usb_disabled(void);
-/* -------------------------------------------------------------------------- */
+/* ----------------------------------------------------------------------- */
/*
* URB support, for asynchronous request completions
@@ -613,12 +633,14 @@
* urb->transfer_flags:
*/
#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
-#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame ignored */
+#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame
+ * ignored */
#define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */
#define URB_NO_SETUP_DMA_MAP 0x0008 /* urb->setup_dma valid on submit */
#define URB_NO_FSBR 0x0020 /* UHCI-specific */
-#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */
-#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */
+#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */
+#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt
+ * needed */
struct usb_iso_packet_descriptor {
unsigned int offset;
@@ -806,7 +828,8 @@
u8 reject; /* submissions will fail */
/* public, documented fields in the urb that can be used by drivers */
- struct list_head urb_list; /* list head for use by the urb owner */
+ struct list_head urb_list; /* list head for use by the urb's
+ * current owner */
struct usb_device *dev; /* (in) pointer to associated device */
unsigned int pipe; /* (in) pipe information */
int status; /* (return) non-ISO status */
@@ -819,14 +842,16 @@
dma_addr_t setup_dma; /* (in) dma addr for setup_packet */
int start_frame; /* (modify) start frame (ISO) */
int number_of_packets; /* (in) number of ISO packets */
- int interval; /* (modify) transfer interval (INT/ISO) */
+ int interval; /* (modify) transfer interval
+ * (INT/ISO) */
int error_count; /* (return) number of ISO errors */
void *context; /* (in) context for completion */
usb_complete_t complete; /* (in) completion routine */
- struct usb_iso_packet_descriptor iso_frame_desc[0]; /* (in) ISO ONLY */
+ struct usb_iso_packet_descriptor iso_frame_desc[0];
+ /* (in) ISO ONLY */
};
-/* -------------------------------------------------------------------------- */
+/* ----------------------------------------------------------------------- */
/**
* usb_fill_control_urb - initializes a control urb
@@ -933,17 +958,17 @@
}
extern void usb_init_urb(struct urb *urb);
-extern struct urb *usb_alloc_urb(int iso_packets, unsigned mem_flags);
+extern struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags);
extern void usb_free_urb(struct urb *urb);
#define usb_put_urb usb_free_urb
extern struct urb *usb_get_urb(struct urb *urb);
-extern int usb_submit_urb(struct urb *urb, unsigned mem_flags);
+extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags);
extern int usb_unlink_urb(struct urb *urb);
extern void usb_kill_urb(struct urb *urb);
#define HAVE_USB_BUFFERS
void *usb_buffer_alloc (struct usb_device *dev, size_t size,
- unsigned mem_flags, dma_addr_t *dma);
+ gfp_t mem_flags, dma_addr_t *dma);
void usb_buffer_free (struct usb_device *dev, size_t size,
void *addr, dma_addr_t dma);
@@ -974,11 +999,6 @@
void *data, int len, int *actual_length,
int timeout);
-/* selective suspend/resume */
-extern int usb_suspend_device(struct usb_device *dev, pm_message_t message);
-extern int usb_resume_device(struct usb_device *dev);
-
-
/* wrappers around usb_control_msg() for the most common standard requests */
extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
unsigned char descindex, void *buf, int size);
@@ -1050,13 +1070,13 @@
struct scatterlist *sg,
int nents,
size_t length,
- unsigned mem_flags
+ gfp_t mem_flags
);
void usb_sg_cancel (struct usb_sg_request *io);
void usb_sg_wait (struct usb_sg_request *io);
-/* -------------------------------------------------------------------------- */
+/* ----------------------------------------------------------------------- */
/*
* For various legacy reasons, Linux has a small cookie that's paired with
@@ -1097,23 +1117,34 @@
/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | ((bit) << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+ ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+ ((bit) << (ep)))
-static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint)
+static inline unsigned int __create_pipe(struct usb_device *dev,
+ unsigned int endpoint)
{
return (dev->devnum << 8) | (endpoint << 15);
}
/* Create various pipes... */
-#define usb_sndctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint))
-#define usb_rcvctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
-#define usb_sndisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint))
-#define usb_rcvisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
-#define usb_sndbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint))
-#define usb_rcvbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
-#define usb_sndintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint))
-#define usb_rcvintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+#define usb_sndctrlpipe(dev,endpoint) \
+ ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint))
+#define usb_rcvctrlpipe(dev,endpoint) \
+ ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+#define usb_sndisocpipe(dev,endpoint) \
+ ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint))
+#define usb_rcvisocpipe(dev,endpoint) \
+ ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+#define usb_sndbulkpipe(dev,endpoint) \
+ ((PIPE_BULK << 30) | __create_pipe(dev,endpoint))
+#define usb_rcvbulkpipe(dev,endpoint) \
+ ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
+#define usb_sndintpipe(dev,endpoint) \
+ ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint))
+#define usb_rcvintpipe(dev,endpoint) \
+ ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
/*-------------------------------------------------------------------------*/
@@ -1137,17 +1168,29 @@
return le16_to_cpu(ep->desc.wMaxPacketSize);
}
-/* -------------------------------------------------------------------------- */
+/* ----------------------------------------------------------------------- */
+
+/* Events from the usb core */
+#define USB_DEVICE_ADD 0x0001
+#define USB_DEVICE_REMOVE 0x0002
+#define USB_BUS_ADD 0x0003
+#define USB_BUS_REMOVE 0x0004
+extern void usb_register_notify(struct notifier_block *nb);
+extern void usb_unregister_notify(struct notifier_block *nb);
#ifdef DEBUG
-#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg)
+#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , \
+ __FILE__ , ## arg)
#else
#define dbg(format, arg...) do {} while (0)
#endif
-#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ## arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__ , ## arg)
+#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \
+ __FILE__ , ## arg)
+#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , \
+ __FILE__ , ## arg)
+#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , \
+ __FILE__ , ## arg)
#endif /* __KERNEL__ */
diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h
index 71e6086..ff81117 100644
--- a/include/linux/usb_gadget.h
+++ b/include/linux/usb_gadget.h
@@ -107,18 +107,18 @@
int (*disable) (struct usb_ep *ep);
struct usb_request *(*alloc_request) (struct usb_ep *ep,
- unsigned gfp_flags);
+ gfp_t gfp_flags);
void (*free_request) (struct usb_ep *ep, struct usb_request *req);
void *(*alloc_buffer) (struct usb_ep *ep, unsigned bytes,
- dma_addr_t *dma, unsigned gfp_flags);
+ dma_addr_t *dma, gfp_t gfp_flags);
void (*free_buffer) (struct usb_ep *ep, void *buf, dma_addr_t dma,
unsigned bytes);
// NOTE: on 2.6, drivers may also use dma_map() and
// dma_sync_single_*() to directly manage dma overhead.
int (*queue) (struct usb_ep *ep, struct usb_request *req,
- unsigned gfp_flags);
+ gfp_t gfp_flags);
int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
int (*set_halt) (struct usb_ep *ep, int value);
@@ -214,7 +214,7 @@
* Returns the request, or null if one could not be allocated.
*/
static inline struct usb_request *
-usb_ep_alloc_request (struct usb_ep *ep, unsigned gfp_flags)
+usb_ep_alloc_request (struct usb_ep *ep, gfp_t gfp_flags)
{
return ep->ops->alloc_request (ep, gfp_flags);
}
@@ -254,7 +254,7 @@
*/
static inline void *
usb_ep_alloc_buffer (struct usb_ep *ep, unsigned len, dma_addr_t *dma,
- unsigned gfp_flags)
+ gfp_t gfp_flags)
{
return ep->ops->alloc_buffer (ep, len, dma, gfp_flags);
}
@@ -330,7 +330,7 @@
* reported when the usb peripheral is disconnected.
*/
static inline int
-usb_ep_queue (struct usb_ep *ep, struct usb_request *req, unsigned gfp_flags)
+usb_ep_queue (struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags)
{
return ep->ops->queue (ep, req, gfp_flags);
}
diff --git a/include/linux/usb_otg.h b/include/linux/usb_otg.h
index c668314..f827f6e 100644
--- a/include/linux/usb_otg.h
+++ b/include/linux/usb_otg.h
@@ -63,6 +63,10 @@
int (*set_power)(struct otg_transceiver *otg,
unsigned mA);
+ /* for non-OTG B devices: set transceiver into suspend mode */
+ int (*set_suspend)(struct otg_transceiver *otg,
+ int suspend);
+
/* for B devices only: start session with A-Host */
int (*start_srp)(struct otg_transceiver *otg);
@@ -108,6 +112,15 @@
}
static inline int
+otg_set_suspend(struct otg_transceiver *otg, int suspend)
+{
+ if (otg->set_suspend != NULL)
+ return otg->set_suspend(otg, suspend);
+ else
+ return 0;
+}
+
+static inline int
otg_start_srp(struct otg_transceiver *otg)
{
return otg->start_srp(otg);
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 9facf73..8859f0b 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -140,6 +140,12 @@
compat_caddr_t usercontext; /* unused */
struct usbdevfs_iso_packet_desc iso_frame_desc[0];
};
+
+struct usbdevfs_ioctl32 {
+ s32 ifno;
+ s32 ioctl_code;
+ compat_caddr_t data;
+};
#endif
#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer)
@@ -160,6 +166,7 @@
#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int)
#define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo)
#define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl)
+#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32)
#define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo)
#define USBDEVFS_RESET _IO('U', 20)
#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int)
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 3701a06..1d5577b 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -32,10 +32,14 @@
* Highlevel APIs for driver use
*/
extern void *vmalloc(unsigned long size);
+extern void *vmalloc_node(unsigned long size, int node);
extern void *vmalloc_exec(unsigned long size);
extern void *vmalloc_32(unsigned long size);
extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot);
-extern void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot);
+extern void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask,
+ pgprot_t prot);
+extern void *__vmalloc_node(unsigned long size, gfp_t gfp_mask,
+ pgprot_t prot, int node);
extern void vfree(void *addr);
extern void *vmap(struct page **pages, unsigned int count,
@@ -48,6 +52,8 @@
extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags);
extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
unsigned long start, unsigned long end);
+extern struct vm_struct *get_vm_area_node(unsigned long size,
+ unsigned long flags, int node);
extern struct vm_struct *remove_vm_area(void *addr);
extern struct vm_struct *__remove_vm_area(void *addr);
extern int map_vm_area(struct vm_struct *area, pgprot_t prot,
diff --git a/include/linux/wanpipe.h b/include/linux/wanpipe.h
index 167d956..dae9860 100644
--- a/include/linux/wanpipe.h
+++ b/include/linux/wanpipe.h
@@ -265,15 +265,6 @@
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
-
-#define is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0)
-#define is_alpha(ch) ((((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'z')||\
- ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'Z'))?1:0)
-#define is_hex_digit(ch) ((((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')||\
- ((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'f')||\
- ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'F'))?1:0)
-
-
/****** Data Structures *****************************************************/
/* Adapter Data Space.
diff --git a/include/linux/x1205.h b/include/linux/x1205.h
new file mode 100644
index 0000000..64fd3af
--- /dev/null
+++ b/include/linux/x1205.h
@@ -0,0 +1,31 @@
+/*
+ * x1205.h - defines for drivers/i2c/chips/x1205.c
+ * Copyright 2004 Karen Spearel
+ * Copyright 2005 Alessandro Zummo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_X1205_H__
+#define __LINUX_X1205_H__
+
+/* commands */
+
+#define X1205_CMD_GETDATETIME 0
+#define X1205_CMD_SETTIME 1
+#define X1205_CMD_SETDATETIME 2
+#define X1205_CMD_GETALARM 3
+#define X1205_CMD_SETALARM 4
+#define X1205_CMD_GETDTRIM 5
+#define X1205_CMD_SETDTRIM 6
+#define X1205_CMD_GETATRIM 7
+#define X1205_CMD_SETATRIM 8
+
+extern int x1205_do_command(unsigned int cmd, void *arg);
+extern int x1205_direct_attach(int adapter_id,
+ struct i2c_client_address_data *address_data);
+
+#endif /* __LINUX_X1205_H__ */
diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h
index cb7c0aa..8138983 100644
--- a/include/media/ovcamchip.h
+++ b/include/media/ovcamchip.h
@@ -17,20 +17,6 @@
#include <linux/videodev.h>
#include <linux/i2c.h>
-/* Remove these once they are officially defined */
-#ifndef I2C_DRIVERID_OVCAMCHIP
- #define I2C_DRIVERID_OVCAMCHIP 0xf00f
-#endif
-#ifndef I2C_HW_SMBUS_OV511
- #define I2C_HW_SMBUS_OV511 0xfe
-#endif
-#ifndef I2C_HW_SMBUS_OV518
- #define I2C_HW_SMBUS_OV518 0xff
-#endif
-#ifndef I2C_HW_SMBUS_OVFX2
- #define I2C_HW_SMBUS_OVFX2 0xfd
-#endif
-
/* --------------------------------- */
/* ENUMERATIONS */
/* --------------------------------- */
diff --git a/include/net/ax25.h b/include/net/ax25.h
index 30bb4a8..2250a18 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -237,8 +237,7 @@
static __inline__ void ax25_cb_put(ax25_cb *ax25)
{
if (atomic_dec_and_test(&ax25->refcount)) {
- if (ax25->digipeat)
- kfree(ax25->digipeat);
+ kfree(ax25->digipeat);
kfree(ax25);
}
}
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 2104586..e42d728 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -171,4 +171,10 @@
int bt_err(__u16 code);
+extern int hci_sock_init(void);
+extern int hci_sock_cleanup(void);
+
+extern int bt_sysfs_init(void);
+extern void bt_sysfs_cleanup(void);
+
#endif /* __BLUETOOTH_H */
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index fbe557f..e656be7 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -275,9 +275,6 @@
atomic_inc(&s->refcnt);
}
-/* ---- RFCOMM chechsum ---- */
-extern u8 rfcomm_crc_table[];
-
/* ---- RFCOMM sockets ---- */
struct sockaddr_rc {
sa_family_t rc_family;
diff --git a/include/net/dst.h b/include/net/dst.h
index 4a056a6..6c196a5 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -94,7 +94,6 @@
struct dst_entry * (*negative_advice)(struct dst_entry *);
void (*link_failure)(struct sk_buff *);
void (*update_pmtu)(struct dst_entry *dst, u32 mtu);
- int (*get_mss)(struct dst_entry *dst, u32 mtu);
int entry_size;
atomic_t entries;
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index dc36b1b..5e38dca 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -11,19 +11,26 @@
*
* Adaption to a generic IEEE 802.11 stack by James Ketrenos
* <jketreno@linux.intel.com>
- * Copyright (c) 2004, Intel Corporation
+ * Copyright (c) 2004-2005, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. See README and COPYING for
* more details.
+ *
+ * API Version History
+ * 1.0.x -- Initial version
+ * 1.1.x -- Added radiotap, QoS, TIM, ieee80211_geo APIs,
+ * various structure changes, and crypto API init method
*/
#ifndef IEEE80211_H
#define IEEE80211_H
-#include <linux/if_ether.h> /* ETH_ALEN */
-#include <linux/kernel.h> /* ARRAY_SIZE */
+#include <linux/if_ether.h> /* ETH_ALEN */
+#include <linux/kernel.h> /* ARRAY_SIZE */
#include <linux/wireless.h>
+#define IEEE80211_VERSION "git-1.1.6"
+
#define IEEE80211_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
6.2.1.1.2.
@@ -33,34 +40,13 @@
represents the 2304 bytes of real data, plus a possible 8 bytes of
WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-
-#define IEEE80211_HLEN 30
-#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-struct ieee80211_hdr {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 addr4[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addr {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
-} __attribute__ ((packed));
-
#define IEEE80211_1ADDR_LEN 10
#define IEEE80211_2ADDR_LEN 16
#define IEEE80211_3ADDR_LEN 24
#define IEEE80211_4ADDR_LEN 30
#define IEEE80211_FCS_LEN 4
+#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
#define MIN_FRAG_THRESHOLD 256U
#define MAX_FRAG_THRESHOLD 2346U
@@ -113,11 +99,11 @@
#define IEEE80211_STYPE_CFACK 0x0050
#define IEEE80211_STYPE_CFPOLL 0x0060
#define IEEE80211_STYPE_CFACKPOLL 0x0070
+#define IEEE80211_STYPE_QOS_DATA 0x0080
#define IEEE80211_SCTL_FRAG 0x000F
#define IEEE80211_SCTL_SEQ 0xFFF0
-
/* debug macros */
#ifdef CONFIG_IEEE80211_DEBUG
@@ -128,8 +114,7 @@
in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
#else
#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-#endif /* CONFIG_IEEE80211_DEBUG */
-
+#endif /* CONFIG_IEEE80211_DEBUG */
/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
@@ -140,7 +125,6 @@
* messages. It should never be used for passing essid to user space. */
const char *escape_essid(const char *essid, u8 essid_len);
-
/*
* To use the debug system:
*
@@ -177,6 +161,7 @@
#define IEEE80211_DL_TX (1<<8)
#define IEEE80211_DL_RX (1<<9)
+#define IEEE80211_DL_QOS (1<<31)
#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
@@ -190,9 +175,10 @@
#define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
#define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
#define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
+#define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
#include <linux/netdevice.h>
#include <linux/wireless.h>
-#include <linux/if_arp.h> /* ARPHRD_ETHER */
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
#ifndef WIRELESS_SPY
#define WIRELESS_SPY /* enable iwspy support */
@@ -200,10 +186,10 @@
#include <net/iw_handler.h> /* new driver API */
#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
#ifndef ETH_P_80211_RAW
#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
@@ -215,10 +201,10 @@
struct ieee80211_snap_hdr {
- u8 dsap; /* always 0xAA */
- u8 ssap; /* always 0xAA */
- u8 ctrl; /* always 0x03 */
- u8 oui[P80211_OUI_LEN]; /* organizational universal id */
+ u8 dsap; /* always 0xAA */
+ u8 ssap; /* always 0xAA */
+ u8 ctrl; /* always 0x03 */
+ u8 oui[P80211_OUI_LEN]; /* organizational universal id */
} __attribute__ ((packed));
@@ -246,8 +232,9 @@
#define WLAN_CAPABILITY_PBCC (1<<6)
#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
+#define WLAN_CAPABILITY_QOS (1<<9)
#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10)
-#define WLAN_CAPABILITY_OSSS_OFDM (1<<13)
+#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
/* Status codes */
enum ieee80211_statuscode {
@@ -312,14 +299,12 @@
WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
};
-
#define IEEE80211_STATMASK_SIGNAL (1<<0)
#define IEEE80211_STATMASK_RSSI (1<<1)
#define IEEE80211_STATMASK_NOISE (1<<2)
#define IEEE80211_STATMASK_RATE (1<<3)
#define IEEE80211_STATMASK_WEMASK 0x7
-
#define IEEE80211_CCK_MODULATION (1<<0)
#define IEEE80211_OFDM_MODULATION (1<<1)
@@ -377,9 +362,6 @@
#define IEEE80211_NUM_CCK_RATES 4
#define IEEE80211_OFDM_SHIFT_MASK_A 4
-
-
-
/* NOTE: This data is for statistical purposes; not all hardware provides this
* information for frames received. Not setting these will not cause
* any adverse affects. */
@@ -388,7 +370,7 @@
s8 rssi;
u8 signal;
u8 noise;
- u16 rate; /* in 100 kbps */
+ u16 rate; /* in 100 kbps */
u8 received_channel;
u8 control;
u8 mask;
@@ -439,38 +421,44 @@
#include "ieee80211_crypt.h"
-#define SEC_KEY_1 (1<<0)
-#define SEC_KEY_2 (1<<1)
-#define SEC_KEY_3 (1<<2)
-#define SEC_KEY_4 (1<<3)
-#define SEC_ACTIVE_KEY (1<<4)
-#define SEC_AUTH_MODE (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL (1<<7)
-#define SEC_ENABLED (1<<8)
+#define SEC_KEY_1 (1<<0)
+#define SEC_KEY_2 (1<<1)
+#define SEC_KEY_3 (1<<2)
+#define SEC_KEY_4 (1<<3)
+#define SEC_ACTIVE_KEY (1<<4)
+#define SEC_AUTH_MODE (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL (1<<7)
+#define SEC_ENABLED (1<<8)
+#define SEC_ENCRYPT (1<<9)
-#define SEC_LEVEL_0 0 /* None */
-#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
+#define SEC_LEVEL_0 0 /* None */
+#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
-#define WEP_KEYS 4
-#define WEP_KEY_LEN 13
+#define SEC_ALG_NONE 0
+#define SEC_ALG_WEP 1
+#define SEC_ALG_TKIP 2
+#define SEC_ALG_CCMP 3
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+#define SCM_KEY_LEN 32
+#define SCM_TEMPORAL_KEY_LENGTH 16
struct ieee80211_security {
u16 active_key:2,
- enabled:1,
- auth_mode:2,
- auth_algo:4,
- unicast_uses_group:1;
+ enabled:1,
+ auth_mode:2, auth_algo:4, unicast_uses_group:1, encrypt:1;
+ u8 encode_alg[WEP_KEYS];
u8 key_sizes[WEP_KEYS];
- u8 keys[WEP_KEYS][WEP_KEY_LEN];
+ u8 keys[WEP_KEYS][SCM_KEY_LEN];
u8 level;
u16 flags;
} __attribute__ ((packed));
-
/*
802.11 data frame from AP
@@ -494,7 +482,7 @@
MFIE_TYPE_RATES = 1,
MFIE_TYPE_FH_SET = 2,
MFIE_TYPE_DS_SET = 3,
- MFIE_TYPE_CF_SET = 4,
+ MFIE_TYPE_CF_SET = 4,
MFIE_TYPE_TIM = 5,
MFIE_TYPE_IBSS_SET = 6,
MFIE_TYPE_COUNTRY = 7,
@@ -516,11 +504,75 @@
MFIE_TYPE_RSN = 48,
MFIE_TYPE_RATES_EX = 50,
MFIE_TYPE_GENERIC = 221,
+ MFIE_TYPE_QOS_PARAMETER = 222,
};
-struct ieee80211_info_element_hdr {
- u8 id;
- u8 len;
+/* Minimal header; can be used for passing 802.11 frames with sufficient
+ * information to determine what type of underlying data type is actually
+ * stored in the data. */
+struct ieee80211_hdr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_1addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_2addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_4addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addrqos {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 payload[0];
+ __le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_4addrqos {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+ u8 payload[0];
+ __le16 qos_ctl;
} __attribute__ ((packed));
struct ieee80211_info_element {
@@ -546,49 +598,77 @@
u16 status;
*/
-struct ieee80211_authentication {
+struct ieee80211_auth {
struct ieee80211_hdr_3addr header;
__le16 algorithm;
__le16 transaction;
__le16 status;
- struct ieee80211_info_element info_element;
+ /* challenge */
+ struct ieee80211_info_element info_element[0];
} __attribute__ ((packed));
+struct ieee80211_disassoc {
+ struct ieee80211_hdr_3addr header;
+ __le16 reason;
+} __attribute__ ((packed));
+
+/* Alias deauth for disassoc */
+#define ieee80211_deauth ieee80211_disassoc
+
+struct ieee80211_probe_request {
+ struct ieee80211_hdr_3addr header;
+ /* SSID, supported rates */
+ struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
struct ieee80211_probe_response {
struct ieee80211_hdr_3addr header;
u32 time_stamp[2];
__le16 beacon_interval;
__le16 capability;
- struct ieee80211_info_element info_element;
+ /* SSID, supported rates, FH params, DS params,
+ * CF params, IBSS params, TIM (if beacon), RSN */
+ struct ieee80211_info_element info_element[0];
} __attribute__ ((packed));
-struct ieee80211_assoc_request_frame {
+/* Alias beacon for probe_response */
+#define ieee80211_beacon ieee80211_probe_response
+
+struct ieee80211_assoc_request {
+ struct ieee80211_hdr_3addr header;
+ __le16 capability;
+ __le16 listen_interval;
+ /* SSID, supported rates, RSN */
+ struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_reassoc_request {
+ struct ieee80211_hdr_3addr header;
__le16 capability;
__le16 listen_interval;
u8 current_ap[ETH_ALEN];
- struct ieee80211_info_element info_element;
+ struct ieee80211_info_element info_element[0];
} __attribute__ ((packed));
-struct ieee80211_assoc_response_frame {
+struct ieee80211_assoc_response {
struct ieee80211_hdr_3addr header;
__le16 capability;
__le16 status;
__le16 aid;
- struct ieee80211_info_element info_element; /* supported rates */
+ /* supported rates */
+ struct ieee80211_info_element info_element[0];
} __attribute__ ((packed));
-
struct ieee80211_txb {
u8 nr_frags;
u8 encrypted;
- u16 reserved;
- u16 frag_size;
- u16 payload_size;
+ u8 rts_included;
+ u8 reserved;
+ __le16 frag_size;
+ __le16 payload_size;
struct sk_buff *fragments[0];
};
-
/* SWEEP TABLE ENTRIES NUMBER */
#define MAX_SWEEP_TAB_ENTRIES 42
#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
@@ -604,9 +684,68 @@
#define MAX_WPA_IE_LEN 64
-#define NETWORK_EMPTY_ESSID (1<<0)
-#define NETWORK_HAS_OFDM (1<<1)
-#define NETWORK_HAS_CCK (1<<2)
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM (1<<1)
+#define NETWORK_HAS_CCK (1<<2)
+
+/* QoS structure */
+#define NETWORK_HAS_QOS_PARAMETERS (1<<3)
+#define NETWORK_HAS_QOS_INFORMATION (1<<4)
+#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | NETWORK_HAS_QOS_INFORMATION)
+
+#define QOS_QUEUE_NUM 4
+#define QOS_OUI_LEN 3
+#define QOS_OUI_TYPE 2
+#define QOS_ELEMENT_ID 221
+#define QOS_OUI_INFO_SUB_TYPE 0
+#define QOS_OUI_PARAM_SUB_TYPE 1
+#define QOS_VERSION_1 1
+#define QOS_AIFSN_MIN_VALUE 2
+
+struct ieee80211_qos_information_element {
+ u8 elementID;
+ u8 length;
+ u8 qui[QOS_OUI_LEN];
+ u8 qui_type;
+ u8 qui_subtype;
+ u8 version;
+ u8 ac_info;
+} __attribute__ ((packed));
+
+struct ieee80211_qos_ac_parameter {
+ u8 aci_aifsn;
+ u8 ecw_min_max;
+ __le16 tx_op_limit;
+} __attribute__ ((packed));
+
+struct ieee80211_qos_parameter_info {
+ struct ieee80211_qos_information_element info_element;
+ u8 reserved;
+ struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
+} __attribute__ ((packed));
+
+struct ieee80211_qos_parameters {
+ __le16 cw_min[QOS_QUEUE_NUM];
+ __le16 cw_max[QOS_QUEUE_NUM];
+ u8 aifs[QOS_QUEUE_NUM];
+ u8 flag[QOS_QUEUE_NUM];
+ __le16 tx_op_limit[QOS_QUEUE_NUM];
+} __attribute__ ((packed));
+
+struct ieee80211_qos_data {
+ struct ieee80211_qos_parameters parameters;
+ int active;
+ int supported;
+ u8 param_count;
+ u8 old_param_count;
+};
+
+struct ieee80211_tim_parameters {
+ u8 tim_count;
+ u8 tim_period;
+} __attribute__ ((packed));
+
+/*******************************************************/
struct ieee80211_network {
/* These entries are used to identify a unique network */
@@ -616,6 +755,8 @@
u8 ssid[IW_ESSID_MAX_SIZE + 1];
u8 ssid_len;
+ struct ieee80211_qos_data qos_data;
+
/* These are network statistics */
struct ieee80211_rx_stats stats;
u16 capability;
@@ -631,10 +772,12 @@
u16 beacon_interval;
u16 listen_interval;
u16 atim_window;
+ u8 erp_value;
u8 wpa_ie[MAX_WPA_IE_LEN];
size_t wpa_ie_len;
u8 rsn_ie[MAX_WPA_IE_LEN];
size_t rsn_ie_len;
+ struct ieee80211_tim_parameters tim;
struct list_head list;
};
@@ -651,17 +794,52 @@
#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
#define DEFAULT_FTS 2346
-
#define CFG_IEEE80211_RESERVE_FCS (1<<0)
#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+#define CFG_IEEE80211_RTS (1<<2)
+
+#define IEEE80211_24GHZ_MIN_CHANNEL 1
+#define IEEE80211_24GHZ_MAX_CHANNEL 14
+#define IEEE80211_24GHZ_CHANNELS 14
+
+#define IEEE80211_52GHZ_MIN_CHANNEL 36
+#define IEEE80211_52GHZ_MAX_CHANNEL 165
+#define IEEE80211_52GHZ_CHANNELS 32
+
+enum {
+ IEEE80211_CH_PASSIVE_ONLY = (1 << 0),
+ IEEE80211_CH_B_ONLY = (1 << 2),
+ IEEE80211_CH_NO_IBSS = (1 << 3),
+ IEEE80211_CH_UNIFORM_SPREADING = (1 << 4),
+ IEEE80211_CH_RADAR_DETECT = (1 << 5),
+ IEEE80211_CH_INVALID = (1 << 6),
+};
+
+struct ieee80211_channel {
+ u32 freq;
+ u8 channel;
+ u8 flags;
+ u8 max_power;
+};
+
+struct ieee80211_geo {
+ u8 name[4];
+ u8 bg_channels;
+ u8 a_channels;
+ struct ieee80211_channel bg[IEEE80211_24GHZ_CHANNELS];
+ struct ieee80211_channel a[IEEE80211_52GHZ_CHANNELS];
+};
struct ieee80211_device {
struct net_device *dev;
+ struct ieee80211_security sec;
/* Bookkeeping structures */
struct net_device_stats stats;
struct ieee80211_stats ieee_stats;
+ struct ieee80211_geo geo;
+
/* Probe / Beacon management */
struct list_head network_free_list;
struct list_head network_list;
@@ -669,62 +847,102 @@
int scans;
int scan_age;
- int iw_mode; /* operating mode (IW_MODE_*) */
+ int iw_mode; /* operating mode (IW_MODE_*) */
+ struct iw_spy_data spy_data; /* iwspy support */
spinlock_t lock;
- int tx_headroom; /* Set to size of any additional room needed at front
- * of allocated Tx SKBs */
+ int tx_headroom; /* Set to size of any additional room needed at front
+ * of allocated Tx SKBs */
u32 config;
/* WEP and other encryption related settings at the device level */
- int open_wep; /* Set to 1 to allow unencrypted frames */
+ int open_wep; /* Set to 1 to allow unencrypted frames */
- int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
+ int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
* WEP key changes */
/* If the host performs {en,de}cryption, then set to 1 */
int host_encrypt;
+ int host_encrypt_msdu;
int host_decrypt;
- int ieee802_1x; /* is IEEE 802.1X used */
+ /* host performs multicast decryption */
+ int host_mc_decrypt;
+
+ int host_open_frag;
+ int host_build_iv;
+ int ieee802_1x; /* is IEEE 802.1X used */
/* WPA data */
int wpa_enabled;
int drop_unencrypted;
- int tkip_countermeasures;
int privacy_invoked;
size_t wpa_ie_len;
u8 *wpa_ie;
struct list_head crypt_deinit_list;
struct ieee80211_crypt_data *crypt[WEP_KEYS];
- int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
+ int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
struct timer_list crypt_deinit_timer;
+ int crypt_quiesced;
- int bcrx_sta_key; /* use individual keys to override default keys even
- * with RX of broad/multicast frames */
+ int bcrx_sta_key; /* use individual keys to override default keys even
+ * with RX of broad/multicast frames */
/* Fragmentation structures */
struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
unsigned int frag_next_idx;
- u16 fts; /* Fragmentation Threshold */
+ u16 fts; /* Fragmentation Threshold */
+ u16 rts; /* RTS threshold */
/* Association info */
u8 bssid[ETH_ALEN];
enum ieee80211_state state;
- int mode; /* A, B, G */
- int modulation; /* CCK, OFDM */
- int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */
- int abg_ture; /* ABG flag */
+ int mode; /* A, B, G */
+ int modulation; /* CCK, OFDM */
+ int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */
+ int abg_true; /* ABG flag */
+
+ int perfect_rssi;
+ int worst_rssi;
/* Callback functions */
- void (*set_security)(struct net_device *dev,
- struct ieee80211_security *sec);
- int (*hard_start_xmit)(struct ieee80211_txb *txb,
- struct net_device *dev);
- int (*reset_port)(struct net_device *dev);
+ void (*set_security) (struct net_device * dev,
+ struct ieee80211_security * sec);
+ int (*hard_start_xmit) (struct ieee80211_txb * txb,
+ struct net_device * dev, int pri);
+ int (*reset_port) (struct net_device * dev);
+ int (*is_queue_full) (struct net_device * dev, int pri);
+
+ int (*handle_management) (struct net_device * dev,
+ struct ieee80211_network * network, u16 type);
+
+ /* Typical STA methods */
+ int (*handle_auth) (struct net_device * dev,
+ struct ieee80211_auth * auth);
+ int (*handle_deauth) (struct net_device * dev,
+ struct ieee80211_auth * auth);
+ int (*handle_disassoc) (struct net_device * dev,
+ struct ieee80211_disassoc * assoc);
+ int (*handle_beacon) (struct net_device * dev,
+ struct ieee80211_beacon * beacon,
+ struct ieee80211_network * network);
+ int (*handle_probe_response) (struct net_device * dev,
+ struct ieee80211_probe_response * resp,
+ struct ieee80211_network * network);
+ int (*handle_probe_request) (struct net_device * dev,
+ struct ieee80211_probe_request * req,
+ struct ieee80211_rx_stats * stats);
+ int (*handle_assoc_response) (struct net_device * dev,
+ struct ieee80211_assoc_response * resp,
+ struct ieee80211_network * network);
+
+ /* Typical AP methods */
+ int (*handle_assoc_request) (struct net_device * dev);
+ int (*handle_reassoc_request) (struct net_device * dev,
+ struct ieee80211_reassoc_request * req);
/* This must be the last item so that it points to the data
* allocated beyond this structure by alloc_ieee80211 */
@@ -736,12 +954,12 @@
#define IEEE_G (1<<2)
#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
-extern inline void *ieee80211_priv(struct net_device *dev)
+static inline void *ieee80211_priv(struct net_device *dev)
{
return ((struct ieee80211_device *)netdev_priv(dev))->priv;
}
-extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
{
/* Single white space is for Linksys APs */
if (essid_len == 1 && essid[0] == ' ')
@@ -757,7 +975,8 @@
return 1;
}
-extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
+static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee,
+ int mode)
{
/*
* It is possible for both access points and our device to support
@@ -783,14 +1002,17 @@
return 0;
}
-extern inline int ieee80211_get_hdrlen(u16 fc)
+static inline int ieee80211_get_hdrlen(u16 fc)
{
int hdrlen = IEEE80211_3ADDR_LEN;
+ u16 stype = WLAN_FC_GET_STYPE(fc);
switch (WLAN_FC_GET_TYPE(fc)) {
case IEEE80211_FTYPE_DATA:
if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
hdrlen = IEEE80211_4ADDR_LEN;
+ if (stype & IEEE80211_STYPE_QOS_DATA)
+ hdrlen += 2;
break;
case IEEE80211_FTYPE_CTL:
switch (WLAN_FC_GET_STYPE(fc)) {
@@ -808,7 +1030,48 @@
return hdrlen;
}
+static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
+{
+ switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
+ case IEEE80211_1ADDR_LEN:
+ return ((struct ieee80211_hdr_1addr *)hdr)->payload;
+ case IEEE80211_2ADDR_LEN:
+ return ((struct ieee80211_hdr_2addr *)hdr)->payload;
+ case IEEE80211_3ADDR_LEN:
+ return ((struct ieee80211_hdr_3addr *)hdr)->payload;
+ case IEEE80211_4ADDR_LEN:
+ return ((struct ieee80211_hdr_4addr *)hdr)->payload;
+ }
+}
+
+static inline int ieee80211_is_ofdm_rate(u8 rate)
+{
+ switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
+ case IEEE80211_OFDM_RATE_6MB:
+ case IEEE80211_OFDM_RATE_9MB:
+ case IEEE80211_OFDM_RATE_12MB:
+ case IEEE80211_OFDM_RATE_18MB:
+ case IEEE80211_OFDM_RATE_24MB:
+ case IEEE80211_OFDM_RATE_36MB:
+ case IEEE80211_OFDM_RATE_48MB:
+ case IEEE80211_OFDM_RATE_54MB:
+ return 1;
+ }
+ return 0;
+}
+
+static inline int ieee80211_is_cck_rate(u8 rate)
+{
+ switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
+ case IEEE80211_CCK_RATE_1MB:
+ case IEEE80211_CCK_RATE_2MB:
+ case IEEE80211_CCK_RATE_5MB:
+ case IEEE80211_CCK_RATE_11MB:
+ return 1;
+ }
+ return 0;
+}
/* ieee80211.c */
extern void free_ieee80211(struct net_device *dev);
@@ -817,18 +1080,30 @@
extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
/* ieee80211_tx.c */
-extern int ieee80211_xmit(struct sk_buff *skb,
- struct net_device *dev);
+extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev);
extern void ieee80211_txb_free(struct ieee80211_txb *);
-
+extern int ieee80211_tx_frame(struct ieee80211_device *ieee,
+ struct ieee80211_hdr *frame, int len);
/* ieee80211_rx.c */
extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_rx_stats *rx_stats);
extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
- struct ieee80211_hdr *header,
+ struct ieee80211_hdr_4addr *header,
struct ieee80211_rx_stats *stats);
+/* ieee80211_geo.c */
+extern const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device
+ *ieee);
+extern int ieee80211_set_geo(struct ieee80211_device *ieee,
+ const struct ieee80211_geo *geo);
+
+extern int ieee80211_is_valid_channel(struct ieee80211_device *ieee,
+ u8 channel);
+extern int ieee80211_channel_to_index(struct ieee80211_device *ieee,
+ u8 channel);
+extern u8 ieee80211_freq_to_channel(struct ieee80211_device *ieee, u32 freq);
+
/* ieee80211_wx.c */
extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
struct iw_request_info *info,
@@ -839,17 +1114,21 @@
extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
+extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
-
-extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
+static inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
{
ieee->scans++;
}
-extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
+static inline int ieee80211_get_scans(struct ieee80211_device *ieee)
{
return ieee->scans;
}
-
-#endif /* IEEE80211_H */
+#endif /* IEEE80211_H */
diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h
index b58a3bc..0a1c2d8 100644
--- a/include/net/ieee80211_crypt.h
+++ b/include/net/ieee80211_crypt.h
@@ -25,16 +25,22 @@
#include <linux/skbuff.h>
+enum {
+ IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0),
+};
+
struct ieee80211_crypto_ops {
const char *name;
/* init new crypto context (e.g., allocate private data space,
* select IV, etc.); returns NULL on failure or pointer to allocated
* private data on success */
- void * (*init)(int keyidx);
+ void *(*init) (int keyidx);
/* deinitialize crypto context and free allocated private data */
- void (*deinit)(void *priv);
+ void (*deinit) (void *priv);
+
+ int (*build_iv) (struct sk_buff * skb, int hdr_len, void *priv);
/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
* value from decrypt_mpdu is passed as the keyidx value for
@@ -42,34 +48,39 @@
* encryption; if not, error will be returned; these functions are
* called for all MPDUs (i.e., fragments).
*/
- int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
- int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+ int (*encrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv);
+ int (*decrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv);
/* These functions are called for full MSDUs, i.e. full frames.
* These can be NULL if full MSDU operations are not needed. */
- int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
- int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
- void *priv);
+ int (*encrypt_msdu) (struct sk_buff * skb, int hdr_len, void *priv);
+ int (*decrypt_msdu) (struct sk_buff * skb, int keyidx, int hdr_len,
+ void *priv);
- int (*set_key)(void *key, int len, u8 *seq, void *priv);
- int (*get_key)(void *key, int len, u8 *seq, void *priv);
+ int (*set_key) (void *key, int len, u8 * seq, void *priv);
+ int (*get_key) (void *key, int len, u8 * seq, void *priv);
/* procfs handler for printing out key information and possible
* statistics */
- char * (*print_stats)(char *p, void *priv);
+ char *(*print_stats) (char *p, void *priv);
+
+ /* Crypto specific flag get/set for configuration settings */
+ unsigned long (*get_flags) (void *priv);
+ unsigned long (*set_flags) (unsigned long flags, void *priv);
/* maximum number of bytes added by encryption; encrypt buf is
* allocated with extra_prefix_len bytes, copy of in_buf, and
* extra_postfix_len; encrypt need not use all this space, but
* the result must start at the beginning of the buffer and correct
* length must be returned */
- int extra_prefix_len, extra_postfix_len;
+ int extra_mpdu_prefix_len, extra_mpdu_postfix_len;
+ int extra_msdu_prefix_len, extra_msdu_postfix_len;
struct module *owner;
};
struct ieee80211_crypt_data {
- struct list_head list; /* delayed deletion list */
+ struct list_head list; /* delayed deletion list */
struct ieee80211_crypto_ops *ops;
void *priv;
atomic_t refcnt;
@@ -77,10 +88,11 @@
int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
-struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name);
+struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name);
void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
void ieee80211_crypt_deinit_handler(unsigned long);
void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
struct ieee80211_crypt_data **crypt);
+void ieee80211_crypt_quiescing(struct ieee80211_device *ieee);
#endif
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
new file mode 100644
index 0000000..429b738
--- /dev/null
+++ b/include/net/ieee80211_radiotap.h
@@ -0,0 +1,231 @@
+/* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */
+/* $NetBSD: ieee80211_radiotap.h,v 1.11 2005/06/22 06:16:02 dyoung Exp $ */
+
+/*-
+ * Copyright (c) 2003, 2004 David Young. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of David Young may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID
+ * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ */
+
+/*
+ * Modifications to fit into the linux IEEE 802.11 stack,
+ * Mike Kershaw (dragorn@kismetwireless.net)
+ */
+
+#ifndef IEEE80211RADIOTAP_H
+#define IEEE80211RADIOTAP_H
+
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+
+/* Radiotap header version (from official NetBSD feed) */
+#define IEEE80211RADIOTAP_VERSION "1.5"
+/* Base version of the radiotap packet header data */
+#define PKTHDR_RADIOTAP_VERSION 0
+
+/* A generic radio capture format is desirable. There is one for
+ * Linux, but it is neither rigidly defined (there were not even
+ * units given for some fields) nor easily extensible.
+ *
+ * I suggest the following extensible radio capture format. It is
+ * based on a bitmap indicating which fields are present.
+ *
+ * I am trying to describe precisely what the application programmer
+ * should expect in the following, and for that reason I tell the
+ * units and origin of each measurement (where it applies), or else I
+ * use sufficiently weaselly language ("is a monotonically nondecreasing
+ * function of...") that I cannot set false expectations for lawyerly
+ * readers.
+ */
+
+/* XXX tcpdump/libpcap do not tolerate variable-length headers,
+ * yet, so we pad every radiotap header to 64 bytes. Ugh.
+ */
+#define IEEE80211_RADIOTAP_HDRLEN 64
+
+/* The radio capture header precedes the 802.11 header. */
+struct ieee80211_radiotap_header {
+ u8 it_version; /* Version 0. Only increases
+ * for drastic changes,
+ * introduction of compatible
+ * new fields does not count.
+ */
+ u8 it_pad;
+ u16 it_len; /* length of the whole
+ * header in bytes, including
+ * it_version, it_pad,
+ * it_len, and data fields.
+ */
+ u32 it_present; /* A bitmap telling which
+ * fields are present. Set bit 31
+ * (0x80000000) to extend the
+ * bitmap by another 32 bits.
+ * Additional extensions are made
+ * by setting bit 31.
+ */
+};
+
+/* Name Data type Units
+ * ---- --------- -----
+ *
+ * IEEE80211_RADIOTAP_TSFT u64 microseconds
+ *
+ * Value in microseconds of the MAC's 64-bit 802.11 Time
+ * Synchronization Function timer when the first bit of the
+ * MPDU arrived at the MAC. For received frames, only.
+ *
+ * IEEE80211_RADIOTAP_CHANNEL 2 x u16 MHz, bitmap
+ *
+ * Tx/Rx frequency in MHz, followed by flags (see below).
+ *
+ * IEEE80211_RADIOTAP_FHSS u16 see below
+ *
+ * For frequency-hopping radios, the hop set (first byte)
+ * and pattern (second byte).
+ *
+ * IEEE80211_RADIOTAP_RATE u8 500kb/s
+ *
+ * Tx/Rx data rate
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTSIGNAL int8_t decibels from
+ * one milliwatt (dBm)
+ *
+ * RF signal power at the antenna, decibel difference from
+ * one milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTNOISE int8_t decibels from
+ * one milliwatt (dBm)
+ *
+ * RF noise power at the antenna, decibel difference from one
+ * milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB)
+ *
+ * RF signal power at the antenna, decibel difference from an
+ * arbitrary, fixed reference.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB)
+ *
+ * RF noise power at the antenna, decibel difference from an
+ * arbitrary, fixed reference point.
+ *
+ * IEEE80211_RADIOTAP_LOCK_QUALITY u16 unitless
+ *
+ * Quality of Barker code lock. Unitless. Monotonically
+ * nondecreasing with "better" lock strength. Called "Signal
+ * Quality" in datasheets. (Is there a standard way to measure
+ * this?)
+ *
+ * IEEE80211_RADIOTAP_TX_ATTENUATION u16 unitless
+ *
+ * Transmit power expressed as unitless distance from max
+ * power set at factory calibration. 0 is max power.
+ * Monotonically nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DB_TX_ATTENUATION u16 decibels (dB)
+ *
+ * Transmit power expressed as decibel distance from max power
+ * set at factory calibration. 0 is max power. Monotonically
+ * nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DBM_TX_POWER int8_t decibels from
+ * one milliwatt (dBm)
+ *
+ * Transmit power expressed as dBm (decibels from a 1 milliwatt
+ * reference). This is the absolute power level measured at
+ * the antenna port.
+ *
+ * IEEE80211_RADIOTAP_FLAGS u8 bitmap
+ *
+ * Properties of transmitted and received frames. See flags
+ * defined below.
+ *
+ * IEEE80211_RADIOTAP_ANTENNA u8 antenna index
+ *
+ * Unitless indication of the Rx/Tx antenna for this packet.
+ * The first antenna is antenna 0.
+ *
+ * IEEE80211_RADIOTAP_FCS u32 data
+ *
+ * FCS from frame in network byte order.
+ */
+enum ieee80211_radiotap_type {
+ IEEE80211_RADIOTAP_TSFT = 0,
+ IEEE80211_RADIOTAP_FLAGS = 1,
+ IEEE80211_RADIOTAP_RATE = 2,
+ IEEE80211_RADIOTAP_CHANNEL = 3,
+ IEEE80211_RADIOTAP_FHSS = 4,
+ IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
+ IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
+ IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
+ IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
+ IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
+ IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
+ IEEE80211_RADIOTAP_ANTENNA = 11,
+ IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
+ IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
+ IEEE80211_RADIOTAP_EXT = 31,
+};
+
+/* Channel flags. */
+#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */
+#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */
+#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */
+#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */
+#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */
+#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */
+#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */
+#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */
+
+/* For IEEE80211_RADIOTAP_FLAGS */
+#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received
+ * during CFP
+ */
+#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received
+ * with short
+ * preamble
+ */
+#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received
+ * with WEP encryption
+ */
+#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received
+ * with fragmentation
+ */
+#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */
+#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between
+ * 802.11 header and payload
+ * (to 32-bit boundary)
+ */
+
+/* Ugly macro to convert literal channel numbers into their mhz equivalents
+ * There are certianly some conditions that will break this (like feeding it '30')
+ * but they shouldn't arise since nothing talks on channel 30. */
+#define ieee80211chan2mhz(x) \
+ (((x) <= 14) ? \
+ (((x) == 14) ? 2484 : ((x) * 5) + 2407) : \
+ ((x) + 1000) * 5)
+
+#endif /* IEEE80211_RADIOTAP_H */
diff --git a/include/net/netrom.h b/include/net/netrom.h
index a6bf6e0..a5ee53b 100644
--- a/include/net/netrom.h
+++ b/include/net/netrom.h
@@ -136,8 +136,7 @@
static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
{
if (atomic_dec_and_test(&nr_neigh->refcount)) {
- if (nr_neigh->digipeat != NULL)
- kfree(nr_neigh->digipeat);
+ kfree(nr_neigh->digipeat);
kfree(nr_neigh);
}
}
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index 1c5f19f..f1c3bc5 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -171,10 +171,10 @@
*/
enum sctp_sinfo_flags {
- MSG_UNORDERED = 1, /* Send/receive message unordered. */
- MSG_ADDR_OVER = 2, /* Override the primary destination. */
- MSG_ABORT=4, /* Send an ABORT message to the peer. */
- /* MSG_EOF is already defined per socket.h */
+ SCTP_UNORDERED = 1, /* Send/receive message unordered. */
+ SCTP_ADDR_OVER = 2, /* Override the primary destination. */
+ SCTP_ABORT=4, /* Send an ABORT message to the peer. */
+ SCTP_EOF=MSG_FIN, /* Initiate graceful shutdown process. */
};
diff --git a/include/net/sock.h b/include/net/sock.h
index ecb7552..e0498bd 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -207,7 +207,7 @@
struct sk_buff_head sk_write_queue;
int sk_wmem_queued;
int sk_forward_alloc;
- unsigned int sk_allocation;
+ gfp_t sk_allocation;
int sk_sndbuf;
int sk_route_caps;
unsigned long sk_flags;
diff --git a/include/net/syncppp.h b/include/net/syncppp.h
index 614cb6b..877efa4 100644
--- a/include/net/syncppp.h
+++ b/include/net/syncppp.h
@@ -86,7 +86,6 @@
void sppp_attach (struct ppp_device *pd);
void sppp_detach (struct net_device *dev);
-void sppp_input (struct net_device *dev, struct sk_buff *m);
int sppp_do_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd);
struct sk_buff *sppp_dequeue (struct net_device *dev);
int sppp_isempty (struct net_device *dev);
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index c8592c7..e788bbc 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -17,6 +17,7 @@
#include <linux/config.h>
#include <linux/device.h>
+#include <linux/sched.h> /* task_struct, completion */
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h
index 5308683..0a9fcd5 100644
--- a/include/rdma/ib_cm.h
+++ b/include/rdma/ib_cm.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2004 Intel Corporation. All rights reserved.
+ * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved.
* Copyright (c) 2004 Topspin Corporation. All rights reserved.
* Copyright (c) 2004 Voltaire Corporation. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
@@ -109,7 +109,6 @@
struct ib_cm_req_event_param {
struct ib_cm_id *listen_id;
- struct ib_device *device;
u8 port;
struct ib_sa_path_rec *primary_path;
@@ -220,7 +219,6 @@
struct ib_cm_sidr_req_event_param {
struct ib_cm_id *listen_id;
- struct ib_device *device;
u8 port;
u16 pkey;
};
@@ -284,6 +282,7 @@
struct ib_cm_id {
ib_cm_handler cm_handler;
void *context;
+ struct ib_device *device;
__be64 service_id;
__be64 service_mask;
enum ib_cm_state state; /* internal CM/debug use */
@@ -295,6 +294,8 @@
/**
* ib_create_cm_id - Allocate a communication identifier.
+ * @device: Device associated with the cm_id. All related communication will
+ * be associated with the specified device.
* @cm_handler: Callback invoked to notify the user of CM events.
* @context: User specified context associated with the communication
* identifier.
@@ -302,7 +303,8 @@
* Communication identifiers are used to track connection states, service
* ID resolution requests, and listen requests.
*/
-struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler,
+struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
+ ib_cm_handler cm_handler,
void *context);
/**
diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h
index 4172e68..2c13350 100644
--- a/include/rdma/ib_mad.h
+++ b/include/rdma/ib_mad.h
@@ -109,10 +109,14 @@
#define IB_QP_SET_QKEY 0x80000000
enum {
+ IB_MGMT_MAD_HDR = 24,
IB_MGMT_MAD_DATA = 232,
+ IB_MGMT_RMPP_HDR = 36,
IB_MGMT_RMPP_DATA = 220,
+ IB_MGMT_VENDOR_HDR = 40,
IB_MGMT_VENDOR_DATA = 216,
- IB_MGMT_SA_DATA = 200
+ IB_MGMT_SA_HDR = 56,
+ IB_MGMT_SA_DATA = 200,
};
struct ib_mad_hdr {
@@ -203,26 +207,25 @@
/**
* ib_mad_send_buf - MAD data buffer and work request for sends.
- * @mad: References an allocated MAD data buffer. The size of the data
- * buffer is specified in the @send_wr.length field.
- * @mapping: DMA mapping information.
+ * @next: A pointer used to chain together MADs for posting.
+ * @mad: References an allocated MAD data buffer.
* @mad_agent: MAD agent that allocated the buffer.
+ * @ah: The address handle to use when sending the MAD.
* @context: User-controlled context fields.
- * @send_wr: An initialized work request structure used when sending the MAD.
- * The wr_id field of the work request is initialized to reference this
- * data structure.
- * @sge: A scatter-gather list referenced by the work request.
+ * @timeout_ms: Time to wait for a response.
+ * @retries: Number of times to retry a request for a response.
*
* Users are responsible for initializing the MAD buffer itself, with the
* exception of specifying the payload length field in any RMPP MAD.
*/
struct ib_mad_send_buf {
- struct ib_mad *mad;
- DECLARE_PCI_UNMAP_ADDR(mapping)
+ struct ib_mad_send_buf *next;
+ void *mad;
struct ib_mad_agent *mad_agent;
+ struct ib_ah *ah;
void *context[2];
- struct ib_send_wr send_wr;
- struct ib_sge sge;
+ int timeout_ms;
+ int retries;
};
/**
@@ -287,7 +290,7 @@
* or @mad_send_wc.
*/
typedef void (*ib_mad_snoop_handler)(struct ib_mad_agent *mad_agent,
- struct ib_send_wr *send_wr,
+ struct ib_mad_send_buf *send_buf,
struct ib_mad_send_wc *mad_send_wc);
/**
@@ -334,13 +337,13 @@
/**
* ib_mad_send_wc - MAD send completion information.
- * @wr_id: Work request identifier associated with the send MAD request.
+ * @send_buf: Send MAD data buffer associated with the send MAD request.
* @status: Completion status.
* @vendor_err: Optional vendor error information returned with a failed
* request.
*/
struct ib_mad_send_wc {
- u64 wr_id;
+ struct ib_mad_send_buf *send_buf;
enum ib_wc_status status;
u32 vendor_err;
};
@@ -366,7 +369,7 @@
* @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers.
* @mad_len: The length of the received MAD, without duplicated headers.
*
- * For received response, the wr_id field of the wc is set to the wr_id
+ * For received response, the wr_id contains a pointer to the ib_mad_send_buf
* for the corresponding send request.
*/
struct ib_mad_recv_wc {
@@ -463,9 +466,9 @@
/**
* ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated
* with the registered client.
- * @mad_agent: Specifies the associated registration to post the send to.
- * @send_wr: Specifies the information needed to send the MAD(s).
- * @bad_send_wr: Specifies the MAD on which an error was encountered.
+ * @send_buf: Specifies the information needed to send the MAD(s).
+ * @bad_send_buf: Specifies the MAD on which an error was encountered. This
+ * parameter is optional if only a single MAD is posted.
*
* Sent MADs are not guaranteed to complete in the order that they were posted.
*
@@ -479,9 +482,8 @@
* defined data being transferred. The paylen_newwin field should be
* specified in network-byte order.
*/
-int ib_post_send_mad(struct ib_mad_agent *mad_agent,
- struct ib_send_wr *send_wr,
- struct ib_send_wr **bad_send_wr);
+int ib_post_send_mad(struct ib_mad_send_buf *send_buf,
+ struct ib_mad_send_buf **bad_send_buf);
/**
* ib_coalesce_recv_mad - Coalesces received MAD data into a single buffer.
@@ -507,23 +509,25 @@
/**
* ib_cancel_mad - Cancels an outstanding send MAD operation.
* @mad_agent: Specifies the registration associated with sent MAD.
- * @wr_id: Indicates the work request identifier of the MAD to cancel.
+ * @send_buf: Indicates the MAD to cancel.
*
* MADs will be returned to the user through the corresponding
* ib_mad_send_handler.
*/
-void ib_cancel_mad(struct ib_mad_agent *mad_agent, u64 wr_id);
+void ib_cancel_mad(struct ib_mad_agent *mad_agent,
+ struct ib_mad_send_buf *send_buf);
/**
* ib_modify_mad - Modifies an outstanding send MAD operation.
* @mad_agent: Specifies the registration associated with sent MAD.
- * @wr_id: Indicates the work request identifier of the MAD to modify.
+ * @send_buf: Indicates the MAD to modify.
* @timeout_ms: New timeout value for sent MAD.
*
* This call will reset the timeout value for a sent MAD to the specified
* value.
*/
-int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms);
+int ib_modify_mad(struct ib_mad_agent *mad_agent,
+ struct ib_mad_send_buf *send_buf, u32 timeout_ms);
/**
* ib_redirect_mad_qp - Registers a QP for MAD services.
@@ -572,7 +576,6 @@
* @remote_qpn: Specifies the QPN of the receiving node.
* @pkey_index: Specifies which PKey the MAD will be sent using. This field
* is valid only if the remote_qpn is QP 1.
- * @ah: References the address handle used to transfer to the remote node.
* @rmpp_active: Indicates if the send will enable RMPP.
* @hdr_len: Indicates the size of the data header of the MAD. This length
* should include the common MAD header, RMPP header, plus any class
@@ -582,11 +585,10 @@
* additional padding that may be necessary.
* @gfp_mask: GFP mask used for the memory allocation.
*
- * This is a helper routine that may be used to allocate a MAD. Users are
- * not required to allocate outbound MADs using this call. The returned
- * MAD send buffer will reference a data buffer usable for sending a MAD, along
+ * This routine allocates a MAD for sending. The returned MAD send buffer
+ * will reference a data buffer usable for sending a MAD, along
* with an initialized work request structure. Users may modify the returned
- * MAD data buffer or work request before posting the send.
+ * MAD data buffer before posting the send.
*
* The returned data buffer will be cleared. Users are responsible for
* initializing the common MAD and any class specific headers. If @rmpp_active
@@ -594,7 +596,7 @@
*/
struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
u32 remote_qpn, u16 pkey_index,
- struct ib_ah *ah, int rmpp_active,
+ int rmpp_active,
int hdr_len, int data_len,
gfp_t gfp_mask);
diff --git a/include/rdma/ib_user_cm.h b/include/rdma/ib_user_cm.h
index e4d1654..3037588 100644
--- a/include/rdma/ib_user_cm.h
+++ b/include/rdma/ib_user_cm.h
@@ -38,7 +38,7 @@
#include <linux/types.h>
-#define IB_USER_CM_ABI_VERSION 2
+#define IB_USER_CM_ABI_VERSION 3
enum {
IB_USER_CM_CMD_CREATE_ID,
@@ -299,8 +299,6 @@
};
struct ib_ucm_req_event_resp {
- /* device */
- /* port */
struct ib_ucm_path_rec primary_path;
struct ib_ucm_path_rec alternate_path;
__be64 remote_ca_guid;
@@ -316,6 +314,7 @@
__u8 retry_count;
__u8 rnr_retry_count;
__u8 srq;
+ __u8 port;
};
struct ib_ucm_rep_event_resp {
@@ -353,10 +352,9 @@
};
struct ib_ucm_sidr_req_event_resp {
- /* device */
- /* port */
__u16 pkey;
- __u8 reserved[2];
+ __u8 port;
+ __u8 reserved;
};
struct ib_ucm_sidr_rep_event_resp {
diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h
index fd85725..072f3a2 100644
--- a/include/rdma/ib_user_verbs.h
+++ b/include/rdma/ib_user_verbs.h
@@ -1,6 +1,7 @@
/*
* Copyright (c) 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -42,15 +43,12 @@
* Increment this value if any changes that break userspace ABI
* compatibility are made.
*/
-#define IB_USER_VERBS_ABI_VERSION 2
+#define IB_USER_VERBS_ABI_VERSION 3
enum {
- IB_USER_VERBS_CMD_QUERY_PARAMS,
IB_USER_VERBS_CMD_GET_CONTEXT,
IB_USER_VERBS_CMD_QUERY_DEVICE,
IB_USER_VERBS_CMD_QUERY_PORT,
- IB_USER_VERBS_CMD_QUERY_GID,
- IB_USER_VERBS_CMD_QUERY_PKEY,
IB_USER_VERBS_CMD_ALLOC_PD,
IB_USER_VERBS_CMD_DEALLOC_PD,
IB_USER_VERBS_CMD_CREATE_AH,
@@ -65,6 +63,7 @@
IB_USER_VERBS_CMD_ALLOC_MW,
IB_USER_VERBS_CMD_BIND_MW,
IB_USER_VERBS_CMD_DEALLOC_MW,
+ IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL,
IB_USER_VERBS_CMD_CREATE_CQ,
IB_USER_VERBS_CMD_RESIZE_CQ,
IB_USER_VERBS_CMD_DESTROY_CQ,
@@ -90,8 +89,11 @@
* Make sure that all structs defined in this file remain laid out so
* that they pack the same way on 32-bit and 64-bit architectures (to
* avoid incompatibility between 32-bit userspace and 64-bit kernels).
- * In particular do not use pointer types -- pass pointers in __u64
- * instead.
+ * Specifically:
+ * - Do not use pointer types -- pass pointers in __u64 instead.
+ * - Make sure that any structure larger than 4 bytes is padded to a
+ * multiple of 8 bytes. Otherwise the structure size will be
+ * different between 32-bit and 64-bit architectures.
*/
struct ib_uverbs_async_event_desc {
@@ -118,27 +120,14 @@
__u16 out_words;
};
-/*
- * No driver_data for "query params" command, since this is intended
- * to be a core function with no possible device dependence.
- */
-struct ib_uverbs_query_params {
- __u64 response;
-};
-
-struct ib_uverbs_query_params_resp {
- __u32 num_cq_events;
-};
-
struct ib_uverbs_get_context {
__u64 response;
- __u64 cq_fd_tab;
__u64 driver_data[0];
};
struct ib_uverbs_get_context_resp {
__u32 async_fd;
- __u32 reserved;
+ __u32 num_comp_vectors;
};
struct ib_uverbs_query_device {
@@ -220,31 +209,6 @@
__u8 reserved[3];
};
-struct ib_uverbs_query_gid {
- __u64 response;
- __u8 port_num;
- __u8 index;
- __u8 reserved[6];
- __u64 driver_data[0];
-};
-
-struct ib_uverbs_query_gid_resp {
- __u8 gid[16];
-};
-
-struct ib_uverbs_query_pkey {
- __u64 response;
- __u8 port_num;
- __u8 index;
- __u8 reserved[6];
- __u64 driver_data[0];
-};
-
-struct ib_uverbs_query_pkey_resp {
- __u16 pkey;
- __u16 reserved;
-};
-
struct ib_uverbs_alloc_pd {
__u64 response;
__u64 driver_data[0];
@@ -278,11 +242,21 @@
__u32 mr_handle;
};
+struct ib_uverbs_create_comp_channel {
+ __u64 response;
+};
+
+struct ib_uverbs_create_comp_channel_resp {
+ __u32 fd;
+};
+
struct ib_uverbs_create_cq {
__u64 response;
__u64 user_handle;
__u32 cqe;
- __u32 event_handler;
+ __u32 comp_vector;
+ __s32 comp_channel;
+ __u32 reserved;
__u64 driver_data[0];
};
@@ -291,6 +265,41 @@
__u32 cqe;
};
+struct ib_uverbs_poll_cq {
+ __u64 response;
+ __u32 cq_handle;
+ __u32 ne;
+};
+
+struct ib_uverbs_wc {
+ __u64 wr_id;
+ __u32 status;
+ __u32 opcode;
+ __u32 vendor_err;
+ __u32 byte_len;
+ __u32 imm_data;
+ __u32 qp_num;
+ __u32 src_qp;
+ __u32 wc_flags;
+ __u16 pkey_index;
+ __u16 slid;
+ __u8 sl;
+ __u8 dlid_path_bits;
+ __u8 port_num;
+ __u8 reserved;
+};
+
+struct ib_uverbs_poll_cq_resp {
+ __u32 count;
+ __u32 reserved;
+ struct ib_uverbs_wc wc[0];
+};
+
+struct ib_uverbs_req_notify_cq {
+ __u32 cq_handle;
+ __u32 solicited_only;
+};
+
struct ib_uverbs_destroy_cq {
__u64 response;
__u32 cq_handle;
@@ -388,6 +397,127 @@
__u32 events_reported;
};
+/*
+ * The ib_uverbs_sge structure isn't used anywhere, since we assume
+ * the ib_sge structure is packed the same way on 32-bit and 64-bit
+ * architectures in both kernel and user space. It's just here to
+ * document the ABI.
+ */
+struct ib_uverbs_sge {
+ __u64 addr;
+ __u32 length;
+ __u32 lkey;
+};
+
+struct ib_uverbs_send_wr {
+ __u64 wr_id;
+ __u32 num_sge;
+ __u32 opcode;
+ __u32 send_flags;
+ __u32 imm_data;
+ union {
+ struct {
+ __u64 remote_addr;
+ __u32 rkey;
+ __u32 reserved;
+ } rdma;
+ struct {
+ __u64 remote_addr;
+ __u64 compare_add;
+ __u64 swap;
+ __u32 rkey;
+ __u32 reserved;
+ } atomic;
+ struct {
+ __u32 ah;
+ __u32 remote_qpn;
+ __u32 remote_qkey;
+ __u32 reserved;
+ } ud;
+ } wr;
+};
+
+struct ib_uverbs_post_send {
+ __u64 response;
+ __u32 qp_handle;
+ __u32 wr_count;
+ __u32 sge_count;
+ __u32 wqe_size;
+ struct ib_uverbs_send_wr send_wr[0];
+};
+
+struct ib_uverbs_post_send_resp {
+ __u32 bad_wr;
+};
+
+struct ib_uverbs_recv_wr {
+ __u64 wr_id;
+ __u32 num_sge;
+ __u32 reserved;
+};
+
+struct ib_uverbs_post_recv {
+ __u64 response;
+ __u32 qp_handle;
+ __u32 wr_count;
+ __u32 sge_count;
+ __u32 wqe_size;
+ struct ib_uverbs_recv_wr recv_wr[0];
+};
+
+struct ib_uverbs_post_recv_resp {
+ __u32 bad_wr;
+};
+
+struct ib_uverbs_post_srq_recv {
+ __u64 response;
+ __u32 srq_handle;
+ __u32 wr_count;
+ __u32 sge_count;
+ __u32 wqe_size;
+ struct ib_uverbs_recv_wr recv[0];
+};
+
+struct ib_uverbs_post_srq_recv_resp {
+ __u32 bad_wr;
+};
+
+struct ib_uverbs_global_route {
+ __u8 dgid[16];
+ __u32 flow_label;
+ __u8 sgid_index;
+ __u8 hop_limit;
+ __u8 traffic_class;
+ __u8 reserved;
+};
+
+struct ib_uverbs_ah_attr {
+ struct ib_uverbs_global_route grh;
+ __u16 dlid;
+ __u8 sl;
+ __u8 src_path_bits;
+ __u8 static_rate;
+ __u8 is_global;
+ __u8 port_num;
+ __u8 reserved;
+};
+
+struct ib_uverbs_create_ah {
+ __u64 response;
+ __u64 user_handle;
+ __u32 pd_handle;
+ __u32 reserved;
+ struct ib_uverbs_ah_attr attr;
+};
+
+struct ib_uverbs_create_ah_resp {
+ __u32 ah_handle;
+};
+
+struct ib_uverbs_destroy_ah {
+ __u32 ah_handle;
+};
+
struct ib_uverbs_attach_mcast {
__u8 gid[16];
__u32 qp_handle;
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index e6f4c9e..f72d46d 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -595,11 +595,8 @@
} atomic;
struct {
struct ib_ah *ah;
- struct ib_mad_hdr *mad_hdr;
u32 remote_qpn;
u32 remote_qkey;
- int timeout_ms; /* valid for MADs only */
- int retries; /* valid for MADs only */
u16 pkey_index; /* valid for GSI only */
u8 port_num; /* valid for DR SMPs on switch only */
} ud;
@@ -951,6 +948,9 @@
IB_DEV_UNREGISTERED
} reg_state;
+ u64 uverbs_cmd_mask;
+ int uverbs_abi_ver;
+
u8 node_type;
u8 phys_port_cnt;
};
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index b361172..6cb1e27 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -116,6 +116,9 @@
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
+/* Values for T10/04-262r7 */
+#define ATA_16 0x85 /* 16-byte pass-thru */
+#define ATA_12 0xa1 /* 12-byte pass-thru */
/*
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index bed4b7c..7529f43 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -4,6 +4,7 @@
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/types.h>
+#include <linux/timer.h>
struct request;
struct scatterlist;
@@ -146,7 +147,7 @@
#define SCSI_STATE_MLQUEUE 0x100b
-extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, int);
+extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
extern void scsi_put_command(struct scsi_cmnd *);
extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int);
extern void scsi_finish_command(struct scsi_cmnd *cmd);
diff --git a/include/scsi/scsi_request.h b/include/scsi/scsi_request.h
index 6a14002..2539deb 100644
--- a/include/scsi/scsi_request.h
+++ b/include/scsi/scsi_request.h
@@ -45,7 +45,7 @@
level driver) of this request */
};
-extern struct scsi_request *scsi_allocate_request(struct scsi_device *, int);
+extern struct scsi_request *scsi_allocate_request(struct scsi_device *, gfp_t);
extern void scsi_release_request(struct scsi_request *);
extern void scsi_wait_req(struct scsi_request *, const void *cmnd,
void *buffer, unsigned bufflen,
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index b0d4454..c04405b 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -28,6 +28,7 @@
#define SCSI_TRANSPORT_FC_H
#include <linux/config.h>
+#include <linux/sched.h>
struct scsi_transport_template;
diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h
index 3a2fd2c..83489c3 100644
--- a/include/sound/memalloc.h
+++ b/include/sound/memalloc.h
@@ -111,7 +111,7 @@
int snd_dma_reserve_buf(struct snd_dma_buffer *dmab, unsigned int id);
/* basic memory allocation functions */
-void *snd_malloc_pages(size_t size, unsigned int gfp_flags);
+void *snd_malloc_pages(size_t size, gfp_t gfp_flags);
void snd_free_pages(void *ptr, size_t size);
#endif /* __SOUND_MEMALLOC_H */
diff --git a/init/Kconfig b/init/Kconfig
index d5a1a12..3dcbd5b 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -60,8 +60,8 @@
default 32 if !USERMODE
default 128 if USERMODE
help
- This is the value of the two limits on the number of argument and of
- env.var passed to init from the kernel command line.
+ Maximum of each of the number of arguments and environment
+ variables passed to init from the kernel command line.
endmenu
diff --git a/init/main.c b/init/main.c
index f142d40..4075d97 100644
--- a/init/main.c
+++ b/init/main.c
@@ -64,10 +64,6 @@
#endif
#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <asm/smp.h>
-#endif
-
/*
* Versions of gcc older than that listed below may actually compile
* and link okay, but the end product can have subtle run time bugs.
@@ -314,14 +310,7 @@
#ifndef CONFIG_SMP
-#ifdef CONFIG_X86_LOCAL_APIC
-static void __init smp_init(void)
-{
- APIC_init_uniprocessor();
-}
-#else
#define smp_init() do { } while (0)
-#endif
static inline void setup_per_cpu_areas(void) { }
static inline void smp_prepare_cpus(unsigned int maxcpus) { }
diff --git a/ipc/shm.c b/ipc/shm.c
index dca9048..b58c651 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -233,10 +233,11 @@
shp->id = shm_buildid(id,shp->shm_perm.seq);
shp->shm_file = file;
file->f_dentry->d_inode->i_ino = shp->id;
- if (shmflg & SHM_HUGETLB)
- set_file_hugepages(file);
- else
+
+ /* Hugetlb ops would have already been assigned. */
+ if (!(shmflg & SHM_HUGETLB))
file->f_op = &shm_file_operations;
+
shm_tot += numpages;
shm_unlock(shp);
return shp->id;
diff --git a/kernel/Makefile b/kernel/Makefile
index ff4dc02..4f5a145 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -22,7 +22,6 @@
obj-$(CONFIG_COMPAT) += compat.o
obj-$(CONFIG_CPUSETS) += cpuset.o
obj-$(CONFIG_IKCONFIG) += configs.o
-obj-$(CONFIG_IKCONFIG_PROC) += configs.o
obj-$(CONFIG_STOP_MACHINE) += stop_machine.o
obj-$(CONFIG_AUDIT) += audit.o
obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
@@ -32,6 +31,7 @@
obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_SECCOMP) += seccomp.o
+obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)
# According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
diff --git a/kernel/acct.c b/kernel/acct.c
index b756f52..2e3f4a4 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -553,7 +553,7 @@
if (delta == 0)
return;
tsk->acct_stimexpd = tsk->stime;
- tsk->acct_rss_mem1 += delta * get_mm_counter(tsk->mm, rss);
+ tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
}
}
diff --git a/kernel/audit.c b/kernel/audit.c
index aefa73a..0c56320 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -133,7 +133,7 @@
struct list_head list;
struct sk_buff *skb; /* formatted skb ready to send */
struct audit_context *ctx; /* NULL or associated context */
- int gfp_mask;
+ gfp_t gfp_mask;
};
static void audit_set_pid(struct audit_buffer *ab, pid_t pid)
@@ -647,7 +647,7 @@
* will be written at syscall exit. If there is no associated task, tsk
* should be NULL. */
-struct audit_buffer *audit_log_start(struct audit_context *ctx, int gfp_mask,
+struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
int type)
{
struct audit_buffer *ab = NULL;
@@ -879,7 +879,7 @@
/* Log an audit record. This is a convenience function that calls
* audit_log_start, audit_log_vformat, and audit_log_end. It may be
* called in any context. */
-void audit_log(struct audit_context *ctx, int gfp_mask, int type,
+void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type,
const char *fmt, ...)
{
struct audit_buffer *ab;
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 88696f6..d8a6850 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -803,7 +803,7 @@
up_read(&mm->mmap_sem);
}
-static void audit_log_exit(struct audit_context *context, unsigned int gfp_mask)
+static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask)
{
int i;
struct audit_buffer *ab;
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 53d8263..3619e93 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -17,6 +17,7 @@
/* This protects CPUs going up and down... */
DECLARE_MUTEX(cpucontrol);
+EXPORT_SYMBOL_GPL(cpucontrol);
static struct notifier_block *cpu_chain;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 28176d0..5a737ed 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -32,6 +32,7 @@
#include <linux/kernel.h>
#include <linux/kmod.h>
#include <linux/list.h>
+#include <linux/mempolicy.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mount.h>
@@ -60,6 +61,9 @@
cpumask_t cpus_allowed; /* CPUs allowed to tasks in cpuset */
nodemask_t mems_allowed; /* Memory Nodes allowed to tasks */
+ /*
+ * Count is atomic so can incr (fork) or decr (exit) without a lock.
+ */
atomic_t count; /* count tasks using this cpuset */
/*
@@ -142,80 +146,91 @@
static struct super_block *cpuset_sb = NULL;
/*
- * cpuset_sem should be held by anyone who is depending on the children
- * or sibling lists of any cpuset, or performing non-atomic operations
- * on the flags or *_allowed values of a cpuset, such as raising the
- * CS_REMOVED flag bit iff it is not already raised, or reading and
- * conditionally modifying the *_allowed values. One kernel global
- * cpuset semaphore should be sufficient - these things don't change
- * that much.
+ * We have two global cpuset semaphores below. They can nest.
+ * It is ok to first take manage_sem, then nest callback_sem. We also
+ * require taking task_lock() when dereferencing a tasks cpuset pointer.
+ * See "The task_lock() exception", at the end of this comment.
*
- * The code that modifies cpusets holds cpuset_sem across the entire
- * operation, from cpuset_common_file_write() down, single threading
- * all cpuset modifications (except for counter manipulations from
- * fork and exit) across the system. This presumes that cpuset
- * modifications are rare - better kept simple and safe, even if slow.
+ * A task must hold both semaphores to modify cpusets. If a task
+ * holds manage_sem, then it blocks others wanting that semaphore,
+ * ensuring that it is the only task able to also acquire callback_sem
+ * and be able to modify cpusets. It can perform various checks on
+ * the cpuset structure first, knowing nothing will change. It can
+ * also allocate memory while just holding manage_sem. While it is
+ * performing these checks, various callback routines can briefly
+ * acquire callback_sem to query cpusets. Once it is ready to make
+ * the changes, it takes callback_sem, blocking everyone else.
*
- * The code that reads cpusets, such as in cpuset_common_file_read()
- * and below, only holds cpuset_sem across small pieces of code, such
- * as when reading out possibly multi-word cpumasks and nodemasks, as
- * the risks are less, and the desire for performance a little greater.
- * The proc_cpuset_show() routine needs to hold cpuset_sem to insure
- * that no cs->dentry is NULL, as it walks up the cpuset tree to root.
+ * Calls to the kernel memory allocator can not be made while holding
+ * callback_sem, as that would risk double tripping on callback_sem
+ * from one of the callbacks into the cpuset code from within
+ * __alloc_pages().
*
- * The hooks from fork and exit, cpuset_fork() and cpuset_exit(), don't
- * (usually) grab cpuset_sem. These are the two most performance
- * critical pieces of code here. The exception occurs on exit(),
- * when a task in a notify_on_release cpuset exits. Then cpuset_sem
+ * If a task is only holding callback_sem, then it has read-only
+ * access to cpusets.
+ *
+ * The task_struct fields mems_allowed and mems_generation may only
+ * be accessed in the context of that task, so require no locks.
+ *
+ * Any task can increment and decrement the count field without lock.
+ * So in general, code holding manage_sem or callback_sem can't rely
+ * on the count field not changing. However, if the count goes to
+ * zero, then only attach_task(), which holds both semaphores, can
+ * increment it again. Because a count of zero means that no tasks
+ * are currently attached, therefore there is no way a task attached
+ * to that cpuset can fork (the other way to increment the count).
+ * So code holding manage_sem or callback_sem can safely assume that
+ * if the count is zero, it will stay zero. Similarly, if a task
+ * holds manage_sem or callback_sem on a cpuset with zero count, it
+ * knows that the cpuset won't be removed, as cpuset_rmdir() needs
+ * both of those semaphores.
+ *
+ * A possible optimization to improve parallelism would be to make
+ * callback_sem a R/W semaphore (rwsem), allowing the callback routines
+ * to proceed in parallel, with read access, until the holder of
+ * manage_sem needed to take this rwsem for exclusive write access
+ * and modify some cpusets.
+ *
+ * The cpuset_common_file_write handler for operations that modify
+ * the cpuset hierarchy holds manage_sem across the entire operation,
+ * single threading all such cpuset modifications across the system.
+ *
+ * The cpuset_common_file_read() handlers only hold callback_sem across
+ * small pieces of code, such as when reading out possibly multi-word
+ * cpumasks and nodemasks.
+ *
+ * The fork and exit callbacks cpuset_fork() and cpuset_exit(), don't
+ * (usually) take either semaphore. These are the two most performance
+ * critical pieces of code here. The exception occurs on cpuset_exit(),
+ * when a task in a notify_on_release cpuset exits. Then manage_sem
* is taken, and if the cpuset count is zero, a usermode call made
* to /sbin/cpuset_release_agent with the name of the cpuset (path
* relative to the root of cpuset file system) as the argument.
*
- * A cpuset can only be deleted if both its 'count' of using tasks is
- * zero, and its list of 'children' cpusets is empty. Since all tasks
- * in the system use _some_ cpuset, and since there is always at least
- * one task in the system (init, pid == 1), therefore, top_cpuset
- * always has either children cpusets and/or using tasks. So no need
- * for any special hack to ensure that top_cpuset cannot be deleted.
+ * A cpuset can only be deleted if both its 'count' of using tasks
+ * is zero, and its list of 'children' cpusets is empty. Since all
+ * tasks in the system use _some_ cpuset, and since there is always at
+ * least one task in the system (init, pid == 1), therefore, top_cpuset
+ * always has either children cpusets and/or using tasks. So we don't
+ * need a special hack to ensure that top_cpuset cannot be deleted.
+ *
+ * The above "Tale of Two Semaphores" would be complete, but for:
+ *
+ * The task_lock() exception
+ *
+ * The need for this exception arises from the action of attach_task(),
+ * which overwrites one tasks cpuset pointer with another. It does
+ * so using both semaphores, however there are several performance
+ * critical places that need to reference task->cpuset without the
+ * expense of grabbing a system global semaphore. Therefore except as
+ * noted below, when dereferencing or, as in attach_task(), modifying
+ * a tasks cpuset pointer we use task_lock(), which acts on a spinlock
+ * (task->alloc_lock) already in the task_struct routinely used for
+ * such matters.
*/
-static DECLARE_MUTEX(cpuset_sem);
-static struct task_struct *cpuset_sem_owner;
-static int cpuset_sem_depth;
-
-/*
- * The global cpuset semaphore cpuset_sem can be needed by the
- * memory allocator to update a tasks mems_allowed (see the calls
- * to cpuset_update_current_mems_allowed()) or to walk up the
- * cpuset hierarchy to find a mem_exclusive cpuset see the calls
- * to cpuset_excl_nodes_overlap()).
- *
- * But if the memory allocation is being done by cpuset.c code, it
- * usually already holds cpuset_sem. Double tripping on a kernel
- * semaphore deadlocks the current task, and any other task that
- * subsequently tries to obtain the lock.
- *
- * Run all up's and down's on cpuset_sem through the following
- * wrappers, which will detect this nested locking, and avoid
- * deadlocking.
- */
-
-static inline void cpuset_down(struct semaphore *psem)
-{
- if (cpuset_sem_owner != current) {
- down(psem);
- cpuset_sem_owner = current;
- }
- cpuset_sem_depth++;
-}
-
-static inline void cpuset_up(struct semaphore *psem)
-{
- if (--cpuset_sem_depth == 0) {
- cpuset_sem_owner = NULL;
- up(psem);
- }
-}
+static DECLARE_MUTEX(manage_sem);
+static DECLARE_MUTEX(callback_sem);
/*
* A couple of forward declarations required, due to cyclic reference loop:
@@ -390,7 +405,7 @@
}
/*
- * Call with cpuset_sem held. Writes path of cpuset into buf.
+ * Call with manage_sem held. Writes path of cpuset into buf.
* Returns 0 on success, -errno on error.
*/
@@ -442,10 +457,11 @@
* status of the /sbin/cpuset_release_agent task, so no sense holding
* our caller up for that.
*
- * The simple act of forking that task might require more memory,
- * which might need cpuset_sem. So this routine must be called while
- * cpuset_sem is not held, to avoid a possible deadlock. See also
- * comments for check_for_release(), below.
+ * When we had only one cpuset semaphore, we had to call this
+ * without holding it, to avoid deadlock when call_usermodehelper()
+ * allocated memory. With two locks, we could now call this while
+ * holding manage_sem, but we still don't, so as to minimize
+ * the time manage_sem is held.
*/
static void cpuset_release_agent(const char *pathbuf)
@@ -477,15 +493,15 @@
* cs is notify_on_release() and now both the user count is zero and
* the list of children is empty, prepare cpuset path in a kmalloc'd
* buffer, to be returned via ppathbuf, so that the caller can invoke
- * cpuset_release_agent() with it later on, once cpuset_sem is dropped.
- * Call here with cpuset_sem held.
+ * cpuset_release_agent() with it later on, once manage_sem is dropped.
+ * Call here with manage_sem held.
*
* This check_for_release() routine is responsible for kmalloc'ing
* pathbuf. The above cpuset_release_agent() is responsible for
* kfree'ing pathbuf. The caller of these routines is responsible
* for providing a pathbuf pointer, initialized to NULL, then
- * calling check_for_release() with cpuset_sem held and the address
- * of the pathbuf pointer, then dropping cpuset_sem, then calling
+ * calling check_for_release() with manage_sem held and the address
+ * of the pathbuf pointer, then dropping manage_sem, then calling
* cpuset_release_agent() with pathbuf, as set by check_for_release().
*/
@@ -516,7 +532,7 @@
* One way or another, we guarantee to return some non-empty subset
* of cpu_online_map.
*
- * Call with cpuset_sem held.
+ * Call with callback_sem held.
*/
static void guarantee_online_cpus(const struct cpuset *cs, cpumask_t *pmask)
@@ -540,7 +556,7 @@
* One way or another, we guarantee to return some non-empty subset
* of node_online_map.
*
- * Call with cpuset_sem held.
+ * Call with callback_sem held.
*/
static void guarantee_online_mems(const struct cpuset *cs, nodemask_t *pmask)
@@ -555,22 +571,47 @@
}
/*
- * Refresh current tasks mems_allowed and mems_generation from
- * current tasks cpuset. Call with cpuset_sem held.
+ * Refresh current tasks mems_allowed and mems_generation from current
+ * tasks cpuset.
*
- * This routine is needed to update the per-task mems_allowed
- * data, within the tasks context, when it is trying to allocate
- * memory (in various mm/mempolicy.c routines) and notices
- * that some other task has been modifying its cpuset.
+ * Call without callback_sem or task_lock() held. May be called with
+ * or without manage_sem held. Will acquire task_lock() and might
+ * acquire callback_sem during call.
+ *
+ * The task_lock() is required to dereference current->cpuset safely.
+ * Without it, we could pick up the pointer value of current->cpuset
+ * in one instruction, and then attach_task could give us a different
+ * cpuset, and then the cpuset we had could be removed and freed,
+ * and then on our next instruction, we could dereference a no longer
+ * valid cpuset pointer to get its mems_generation field.
+ *
+ * This routine is needed to update the per-task mems_allowed data,
+ * within the tasks context, when it is trying to allocate memory
+ * (in various mm/mempolicy.c routines) and notices that some other
+ * task has been modifying its cpuset.
*/
static void refresh_mems(void)
{
- struct cpuset *cs = current->cpuset;
+ int my_cpusets_mem_gen;
- if (current->cpuset_mems_generation != cs->mems_generation) {
+ task_lock(current);
+ my_cpusets_mem_gen = current->cpuset->mems_generation;
+ task_unlock(current);
+
+ if (current->cpuset_mems_generation != my_cpusets_mem_gen) {
+ struct cpuset *cs;
+ nodemask_t oldmem = current->mems_allowed;
+
+ down(&callback_sem);
+ task_lock(current);
+ cs = current->cpuset;
guarantee_online_mems(cs, ¤t->mems_allowed);
current->cpuset_mems_generation = cs->mems_generation;
+ task_unlock(current);
+ up(&callback_sem);
+ if (!nodes_equal(oldmem, current->mems_allowed))
+ numa_policy_rebind(&oldmem, ¤t->mems_allowed);
}
}
@@ -579,7 +620,7 @@
*
* One cpuset is a subset of another if all its allowed CPUs and
* Memory Nodes are a subset of the other, and its exclusive flags
- * are only set if the other's are set.
+ * are only set if the other's are set. Call holding manage_sem.
*/
static int is_cpuset_subset(const struct cpuset *p, const struct cpuset *q)
@@ -597,7 +638,7 @@
* If we replaced the flag and mask values of the current cpuset
* (cur) with those values in the trial cpuset (trial), would
* our various subset and exclusive rules still be valid? Presumes
- * cpuset_sem held.
+ * manage_sem held.
*
* 'cur' is the address of an actual, in-use cpuset. Operations
* such as list traversal that depend on the actual address of the
@@ -651,7 +692,7 @@
* exclusive child cpusets
* Build these two partitions by calling partition_sched_domains
*
- * Call with cpuset_sem held. May nest a call to the
+ * Call with manage_sem held. May nest a call to the
* lock_cpu_hotplug()/unlock_cpu_hotplug() pair.
*/
@@ -696,6 +737,10 @@
unlock_cpu_hotplug();
}
+/*
+ * Call with manage_sem held. May take callback_sem during call.
+ */
+
static int update_cpumask(struct cpuset *cs, char *buf)
{
struct cpuset trialcs;
@@ -712,12 +757,18 @@
if (retval < 0)
return retval;
cpus_unchanged = cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed);
+ down(&callback_sem);
cs->cpus_allowed = trialcs.cpus_allowed;
+ up(&callback_sem);
if (is_cpu_exclusive(cs) && !cpus_unchanged)
update_cpu_domains(cs);
return 0;
}
+/*
+ * Call with manage_sem held. May take callback_sem during call.
+ */
+
static int update_nodemask(struct cpuset *cs, char *buf)
{
struct cpuset trialcs;
@@ -732,9 +783,11 @@
return -ENOSPC;
retval = validate_change(cs, &trialcs);
if (retval == 0) {
+ down(&callback_sem);
cs->mems_allowed = trialcs.mems_allowed;
atomic_inc(&cpuset_mems_generation);
cs->mems_generation = atomic_read(&cpuset_mems_generation);
+ up(&callback_sem);
}
return retval;
}
@@ -745,6 +798,8 @@
* CS_NOTIFY_ON_RELEASE)
* cs: the cpuset to update
* buf: the buffer where we read the 0 or 1
+ *
+ * Call with manage_sem held.
*/
static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs, char *buf)
@@ -766,16 +821,27 @@
return err;
cpu_exclusive_changed =
(is_cpu_exclusive(cs) != is_cpu_exclusive(&trialcs));
+ down(&callback_sem);
if (turning_on)
set_bit(bit, &cs->flags);
else
clear_bit(bit, &cs->flags);
+ up(&callback_sem);
if (cpu_exclusive_changed)
update_cpu_domains(cs);
return 0;
}
+/*
+ * Attack task specified by pid in 'pidbuf' to cpuset 'cs', possibly
+ * writing the path of the old cpuset in 'ppathbuf' if it needs to be
+ * notified on release.
+ *
+ * Call holding manage_sem. May take callback_sem and task_lock of
+ * the task 'pid' during call.
+ */
+
static int attach_task(struct cpuset *cs, char *pidbuf, char **ppathbuf)
{
pid_t pid;
@@ -792,7 +858,7 @@
read_lock(&tasklist_lock);
tsk = find_task_by_pid(pid);
- if (!tsk) {
+ if (!tsk || tsk->flags & PF_EXITING) {
read_unlock(&tasklist_lock);
return -ESRCH;
}
@@ -810,10 +876,13 @@
get_task_struct(tsk);
}
+ down(&callback_sem);
+
task_lock(tsk);
oldcs = tsk->cpuset;
if (!oldcs) {
task_unlock(tsk);
+ up(&callback_sem);
put_task_struct(tsk);
return -ESRCH;
}
@@ -824,6 +893,7 @@
guarantee_online_cpus(cs, &cpus);
set_cpus_allowed(tsk, cpus);
+ up(&callback_sem);
put_task_struct(tsk);
if (atomic_dec_and_test(&oldcs->count))
check_for_release(oldcs, ppathbuf);
@@ -867,7 +937,7 @@
}
buffer[nbytes] = 0; /* nul-terminate */
- cpuset_down(&cpuset_sem);
+ down(&manage_sem);
if (is_removed(cs)) {
retval = -ENODEV;
@@ -901,7 +971,7 @@
if (retval == 0)
retval = nbytes;
out2:
- cpuset_up(&cpuset_sem);
+ up(&manage_sem);
cpuset_release_agent(pathbuf);
out1:
kfree(buffer);
@@ -941,9 +1011,9 @@
{
cpumask_t mask;
- cpuset_down(&cpuset_sem);
+ down(&callback_sem);
mask = cs->cpus_allowed;
- cpuset_up(&cpuset_sem);
+ up(&callback_sem);
return cpulist_scnprintf(page, PAGE_SIZE, mask);
}
@@ -952,9 +1022,9 @@
{
nodemask_t mask;
- cpuset_down(&cpuset_sem);
+ down(&callback_sem);
mask = cs->mems_allowed;
- cpuset_up(&cpuset_sem);
+ up(&callback_sem);
return nodelist_scnprintf(page, PAGE_SIZE, mask);
}
@@ -995,7 +1065,6 @@
goto out;
}
*s++ = '\n';
- *s = '\0';
retval = simple_read_from_buffer(buf, nbytes, ppos, page, s - page);
out:
@@ -1048,6 +1117,21 @@
return 0;
}
+/*
+ * cpuset_rename - Only allow simple rename of directories in place.
+ */
+static int cpuset_rename(struct inode *old_dir, struct dentry *old_dentry,
+ struct inode *new_dir, struct dentry *new_dentry)
+{
+ if (!S_ISDIR(old_dentry->d_inode->i_mode))
+ return -ENOTDIR;
+ if (new_dentry->d_inode)
+ return -EEXIST;
+ if (old_dir != new_dir)
+ return -EIO;
+ return simple_rename(old_dir, old_dentry, new_dir, new_dentry);
+}
+
static struct file_operations cpuset_file_operations = {
.read = cpuset_file_read,
.write = cpuset_file_write,
@@ -1060,6 +1144,7 @@
.lookup = simple_lookup,
.mkdir = cpuset_mkdir,
.rmdir = cpuset_rmdir,
+ .rename = cpuset_rename,
};
static int cpuset_create_file(struct dentry *dentry, int mode)
@@ -1163,7 +1248,9 @@
/*
* Load into 'pidarray' up to 'npids' of the tasks using cpuset 'cs'.
- * Return actual number of pids loaded.
+ * Return actual number of pids loaded. No need to task_lock(p)
+ * when reading out p->cpuset, as we don't really care if it changes
+ * on the next cycle, and we are not going to try to dereference it.
*/
static inline int pid_array_load(pid_t *pidarray, int npids, struct cpuset *cs)
{
@@ -1205,6 +1292,12 @@
return cnt;
}
+/*
+ * Handle an open on 'tasks' file. Prepare a buffer listing the
+ * process id's of tasks currently attached to the cpuset being opened.
+ *
+ * Does not require any specific cpuset semaphores, and does not take any.
+ */
static int cpuset_tasks_open(struct inode *unused, struct file *file)
{
struct cpuset *cs = __d_cs(file->f_dentry->d_parent);
@@ -1352,7 +1445,8 @@
if (!cs)
return -ENOMEM;
- cpuset_down(&cpuset_sem);
+ down(&manage_sem);
+ refresh_mems();
cs->flags = 0;
if (notify_on_release(parent))
set_bit(CS_NOTIFY_ON_RELEASE, &cs->flags);
@@ -1366,25 +1460,27 @@
cs->parent = parent;
+ down(&callback_sem);
list_add(&cs->sibling, &cs->parent->children);
+ up(&callback_sem);
err = cpuset_create_dir(cs, name, mode);
if (err < 0)
goto err;
/*
- * Release cpuset_sem before cpuset_populate_dir() because it
+ * Release manage_sem before cpuset_populate_dir() because it
* will down() this new directory's i_sem and if we race with
* another mkdir, we might deadlock.
*/
- cpuset_up(&cpuset_sem);
+ up(&manage_sem);
err = cpuset_populate_dir(cs->dentry);
/* If err < 0, we have a half-filled directory - oh well ;) */
return 0;
err:
list_del(&cs->sibling);
- cpuset_up(&cpuset_sem);
+ up(&manage_sem);
kfree(cs);
return err;
}
@@ -1406,29 +1502,32 @@
/* the vfs holds both inode->i_sem already */
- cpuset_down(&cpuset_sem);
+ down(&manage_sem);
+ refresh_mems();
if (atomic_read(&cs->count) > 0) {
- cpuset_up(&cpuset_sem);
+ up(&manage_sem);
return -EBUSY;
}
if (!list_empty(&cs->children)) {
- cpuset_up(&cpuset_sem);
+ up(&manage_sem);
return -EBUSY;
}
parent = cs->parent;
+ down(&callback_sem);
set_bit(CS_REMOVED, &cs->flags);
if (is_cpu_exclusive(cs))
update_cpu_domains(cs);
list_del(&cs->sibling); /* delete my sibling from parent->children */
- if (list_empty(&parent->children))
- check_for_release(parent, &pathbuf);
spin_lock(&cs->dentry->d_lock);
d = dget(cs->dentry);
cs->dentry = NULL;
spin_unlock(&d->d_lock);
cpuset_d_remove_dir(d);
dput(d);
- cpuset_up(&cpuset_sem);
+ up(&callback_sem);
+ if (list_empty(&parent->children))
+ check_for_release(parent, &pathbuf);
+ up(&manage_sem);
cpuset_release_agent(pathbuf);
return 0;
}
@@ -1488,16 +1587,26 @@
* cpuset_fork - attach newly forked task to its parents cpuset.
* @tsk: pointer to task_struct of forking parent process.
*
- * Description: By default, on fork, a task inherits its
- * parent's cpuset. The pointer to the shared cpuset is
- * automatically copied in fork.c by dup_task_struct().
- * This cpuset_fork() routine need only increment the usage
- * counter in that cpuset.
+ * Description: A task inherits its parent's cpuset at fork().
+ *
+ * A pointer to the shared cpuset was automatically copied in fork.c
+ * by dup_task_struct(). However, we ignore that copy, since it was
+ * not made under the protection of task_lock(), so might no longer be
+ * a valid cpuset pointer. attach_task() might have already changed
+ * current->cpuset, allowing the previously referenced cpuset to
+ * be removed and freed. Instead, we task_lock(current) and copy
+ * its present value of current->cpuset for our freshly forked child.
+ *
+ * At the point that cpuset_fork() is called, 'current' is the parent
+ * task, and the passed argument 'child' points to the child task.
**/
-void cpuset_fork(struct task_struct *tsk)
+void cpuset_fork(struct task_struct *child)
{
- atomic_inc(&tsk->cpuset->count);
+ task_lock(current);
+ child->cpuset = current->cpuset;
+ atomic_inc(&child->cpuset->count);
+ task_unlock(current);
}
/**
@@ -1506,35 +1615,42 @@
*
* Description: Detach cpuset from @tsk and release it.
*
- * Note that cpusets marked notify_on_release force every task
- * in them to take the global cpuset_sem semaphore when exiting.
- * This could impact scaling on very large systems. Be reluctant
- * to use notify_on_release cpusets where very high task exit
- * scaling is required on large systems.
+ * Note that cpusets marked notify_on_release force every task in
+ * them to take the global manage_sem semaphore when exiting.
+ * This could impact scaling on very large systems. Be reluctant to
+ * use notify_on_release cpusets where very high task exit scaling
+ * is required on large systems.
*
- * Don't even think about derefencing 'cs' after the cpuset use
- * count goes to zero, except inside a critical section guarded
- * by the cpuset_sem semaphore. If you don't hold cpuset_sem,
- * then a zero cpuset use count is a license to any other task to
- * nuke the cpuset immediately.
+ * Don't even think about derefencing 'cs' after the cpuset use count
+ * goes to zero, except inside a critical section guarded by manage_sem
+ * or callback_sem. Otherwise a zero cpuset use count is a license to
+ * any other task to nuke the cpuset immediately, via cpuset_rmdir().
+ *
+ * This routine has to take manage_sem, not callback_sem, because
+ * it is holding that semaphore while calling check_for_release(),
+ * which calls kmalloc(), so can't be called holding callback__sem().
+ *
+ * We don't need to task_lock() this reference to tsk->cpuset,
+ * because tsk is already marked PF_EXITING, so attach_task() won't
+ * mess with it.
**/
void cpuset_exit(struct task_struct *tsk)
{
struct cpuset *cs;
- task_lock(tsk);
+ BUG_ON(!(tsk->flags & PF_EXITING));
+
cs = tsk->cpuset;
tsk->cpuset = NULL;
- task_unlock(tsk);
if (notify_on_release(cs)) {
char *pathbuf = NULL;
- cpuset_down(&cpuset_sem);
+ down(&manage_sem);
if (atomic_dec_and_test(&cs->count))
check_for_release(cs, &pathbuf);
- cpuset_up(&cpuset_sem);
+ up(&manage_sem);
cpuset_release_agent(pathbuf);
} else {
atomic_dec(&cs->count);
@@ -1555,11 +1671,11 @@
{
cpumask_t mask;
- cpuset_down(&cpuset_sem);
+ down(&callback_sem);
task_lock((struct task_struct *)tsk);
guarantee_online_cpus(tsk->cpuset, &mask);
task_unlock((struct task_struct *)tsk);
- cpuset_up(&cpuset_sem);
+ up(&callback_sem);
return mask;
}
@@ -1575,19 +1691,28 @@
* If the current tasks cpusets mems_allowed changed behind our backs,
* update current->mems_allowed and mems_generation to the new value.
* Do not call this routine if in_interrupt().
+ *
+ * Call without callback_sem or task_lock() held. May be called
+ * with or without manage_sem held. Unless exiting, it will acquire
+ * task_lock(). Also might acquire callback_sem during call to
+ * refresh_mems().
*/
void cpuset_update_current_mems_allowed(void)
{
- struct cpuset *cs = current->cpuset;
+ struct cpuset *cs;
+ int need_to_refresh = 0;
+ task_lock(current);
+ cs = current->cpuset;
if (!cs)
- return; /* task is exiting */
- if (current->cpuset_mems_generation != cs->mems_generation) {
- cpuset_down(&cpuset_sem);
+ goto done;
+ if (current->cpuset_mems_generation != cs->mems_generation)
+ need_to_refresh = 1;
+done:
+ task_unlock(current);
+ if (need_to_refresh)
refresh_mems();
- cpuset_up(&cpuset_sem);
- }
}
/**
@@ -1621,7 +1746,7 @@
/*
* nearest_exclusive_ancestor() - Returns the nearest mem_exclusive
- * ancestor to the specified cpuset. Call while holding cpuset_sem.
+ * ancestor to the specified cpuset. Call holding callback_sem.
* If no ancestor is mem_exclusive (an unusual configuration), then
* returns the root cpuset.
*/
@@ -1648,12 +1773,12 @@
* GFP_KERNEL allocations are not so marked, so can escape to the
* nearest mem_exclusive ancestor cpuset.
*
- * Scanning up parent cpusets requires cpuset_sem. The __alloc_pages()
+ * Scanning up parent cpusets requires callback_sem. The __alloc_pages()
* routine only calls here with __GFP_HARDWALL bit _not_ set if
* it's a GFP_KERNEL allocation, and all nodes in the current tasks
* mems_allowed came up empty on the first pass over the zonelist.
* So only GFP_KERNEL allocations, if all nodes in the cpuset are
- * short of memory, might require taking the cpuset_sem semaphore.
+ * short of memory, might require taking the callback_sem semaphore.
*
* The first loop over the zonelist in mm/page_alloc.c:__alloc_pages()
* calls here with __GFP_HARDWALL always set in gfp_mask, enforcing
@@ -1685,14 +1810,16 @@
return 0;
/* Not hardwall and node outside mems_allowed: scan up cpusets */
- cpuset_down(&cpuset_sem);
- cs = current->cpuset;
- if (!cs)
- goto done; /* current task exiting */
- cs = nearest_exclusive_ancestor(cs);
+ down(&callback_sem);
+
+ if (current->flags & PF_EXITING) /* Let dying task have memory */
+ return 1;
+ task_lock(current);
+ cs = nearest_exclusive_ancestor(current->cpuset);
+ task_unlock(current);
+
allowed = node_isset(node, cs->mems_allowed);
-done:
- cpuset_up(&cpuset_sem);
+ up(&callback_sem);
return allowed;
}
@@ -1705,7 +1832,7 @@
* determine if task @p's memory usage might impact the memory
* available to the current task.
*
- * Acquires cpuset_sem - not suitable for calling from a fast path.
+ * Acquires callback_sem - not suitable for calling from a fast path.
**/
int cpuset_excl_nodes_overlap(const struct task_struct *p)
@@ -1713,18 +1840,27 @@
const struct cpuset *cs1, *cs2; /* my and p's cpuset ancestors */
int overlap = 0; /* do cpusets overlap? */
- cpuset_down(&cpuset_sem);
- cs1 = current->cpuset;
- if (!cs1)
- goto done; /* current task exiting */
- cs2 = p->cpuset;
- if (!cs2)
- goto done; /* task p is exiting */
- cs1 = nearest_exclusive_ancestor(cs1);
- cs2 = nearest_exclusive_ancestor(cs2);
+ down(&callback_sem);
+
+ task_lock(current);
+ if (current->flags & PF_EXITING) {
+ task_unlock(current);
+ goto done;
+ }
+ cs1 = nearest_exclusive_ancestor(current->cpuset);
+ task_unlock(current);
+
+ task_lock((struct task_struct *)p);
+ if (p->flags & PF_EXITING) {
+ task_unlock((struct task_struct *)p);
+ goto done;
+ }
+ cs2 = nearest_exclusive_ancestor(p->cpuset);
+ task_unlock((struct task_struct *)p);
+
overlap = nodes_intersects(cs1->mems_allowed, cs2->mems_allowed);
done:
- cpuset_up(&cpuset_sem);
+ up(&callback_sem);
return overlap;
}
@@ -1733,6 +1869,10 @@
* proc_cpuset_show()
* - Print tasks cpuset path into seq_file.
* - Used for /proc/<pid>/cpuset.
+ * - No need to task_lock(tsk) on this tsk->cpuset reference, as it
+ * doesn't really matter if tsk->cpuset changes after we read it,
+ * and we take manage_sem, keeping attach_task() from changing it
+ * anyway.
*/
static int proc_cpuset_show(struct seq_file *m, void *v)
@@ -1747,10 +1887,8 @@
return -ENOMEM;
tsk = m->private;
- cpuset_down(&cpuset_sem);
- task_lock(tsk);
+ down(&manage_sem);
cs = tsk->cpuset;
- task_unlock(tsk);
if (!cs) {
retval = -EINVAL;
goto out;
@@ -1762,7 +1900,7 @@
seq_puts(m, buf);
seq_putc(m, '\n');
out:
- cpuset_up(&cpuset_sem);
+ up(&manage_sem);
kfree(buf);
return retval;
}
diff --git a/kernel/exit.c b/kernel/exit.c
index 3b25b18..537394b 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -547,7 +547,7 @@
if (p->pdeath_signal)
/* We already hold the tasklist_lock here. */
- group_send_sig_info(p->pdeath_signal, (void *) 0, p);
+ group_send_sig_info(p->pdeath_signal, SEND_SIG_NOINFO, p);
/* Move the child from its dying parent to the new one. */
if (unlikely(traced)) {
@@ -591,8 +591,8 @@
int pgrp = process_group(p);
if (will_become_orphaned_pgrp(pgrp, NULL) && has_stopped_jobs(pgrp)) {
- __kill_pg_info(SIGHUP, (void *)1, pgrp);
- __kill_pg_info(SIGCONT, (void *)1, pgrp);
+ __kill_pg_info(SIGHUP, SEND_SIG_PRIV, pgrp);
+ __kill_pg_info(SIGCONT, SEND_SIG_PRIV, pgrp);
}
}
}
@@ -727,8 +727,8 @@
(t->signal->session == tsk->signal->session) &&
will_become_orphaned_pgrp(process_group(tsk), tsk) &&
has_stopped_jobs(process_group(tsk))) {
- __kill_pg_info(SIGHUP, (void *)1, process_group(tsk));
- __kill_pg_info(SIGCONT, (void *)1, process_group(tsk));
+ __kill_pg_info(SIGHUP, SEND_SIG_PRIV, process_group(tsk));
+ __kill_pg_info(SIGCONT, SEND_SIG_PRIV, process_group(tsk));
}
/* Let father know we died
@@ -783,10 +783,6 @@
/* If the process is dead, release it - nobody will wait for it */
if (state == EXIT_DEAD)
release_task(tsk);
-
- /* PF_DEAD causes final put_task_struct after we schedule. */
- preempt_disable();
- tsk->flags |= PF_DEAD;
}
fastcall NORET_TYPE void do_exit(long code)
@@ -839,7 +835,10 @@
preempt_count());
acct_update_integrals(tsk);
- update_mem_hiwater(tsk);
+ if (tsk->mm) {
+ update_hiwater_rss(tsk->mm);
+ update_hiwater_vm(tsk->mm);
+ }
group_dead = atomic_dec_and_test(&tsk->signal->live);
if (group_dead) {
del_timer_sync(&tsk->signal->real_timer);
@@ -870,7 +869,11 @@
tsk->mempolicy = NULL;
#endif
- BUG_ON(!(current->flags & PF_DEAD));
+ /* PF_DEAD causes final put_task_struct after we schedule. */
+ preempt_disable();
+ BUG_ON(tsk->flags & PF_DEAD);
+ tsk->flags |= PF_DEAD;
+
schedule();
BUG();
/* Avoid "noreturn function does return". */
@@ -1380,6 +1383,15 @@
switch (p->state) {
case TASK_TRACED:
+ /*
+ * When we hit the race with PTRACE_ATTACH,
+ * we will not report this child. But the
+ * race means it has not yet been moved to
+ * our ptrace_children list, so we need to
+ * set the flag here to avoid a spurious ECHILD
+ * when the race happens with the only child.
+ */
+ flag = 1;
if (!my_ptrace_child(p))
continue;
/*FALLTHROUGH*/
diff --git a/kernel/fork.c b/kernel/fork.c
index 280bd44..8a06961 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -182,37 +182,37 @@
}
#ifdef CONFIG_MMU
-static inline int dup_mmap(struct mm_struct * mm, struct mm_struct * oldmm)
+static inline int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm)
{
- struct vm_area_struct * mpnt, *tmp, **pprev;
+ struct vm_area_struct *mpnt, *tmp, **pprev;
struct rb_node **rb_link, *rb_parent;
int retval;
unsigned long charge;
struct mempolicy *pol;
down_write(&oldmm->mmap_sem);
- flush_cache_mm(current->mm);
+ flush_cache_mm(oldmm);
+ down_write(&mm->mmap_sem);
+
mm->locked_vm = 0;
mm->mmap = NULL;
mm->mmap_cache = NULL;
mm->free_area_cache = oldmm->mmap_base;
mm->cached_hole_size = ~0UL;
mm->map_count = 0;
- set_mm_counter(mm, rss, 0);
- set_mm_counter(mm, anon_rss, 0);
cpus_clear(mm->cpu_vm_mask);
mm->mm_rb = RB_ROOT;
rb_link = &mm->mm_rb.rb_node;
rb_parent = NULL;
pprev = &mm->mmap;
- for (mpnt = current->mm->mmap ; mpnt ; mpnt = mpnt->vm_next) {
+ for (mpnt = oldmm->mmap; mpnt; mpnt = mpnt->vm_next) {
struct file *file;
if (mpnt->vm_flags & VM_DONTCOPY) {
long pages = vma_pages(mpnt);
mm->total_vm -= pages;
- __vm_stat_account(mm, mpnt->vm_flags, mpnt->vm_file,
+ vm_stat_account(mm, mpnt->vm_flags, mpnt->vm_file,
-pages);
continue;
}
@@ -253,12 +253,8 @@
}
/*
- * Link in the new vma and copy the page table entries:
- * link in first so that swapoff can see swap entries.
- * Note that, exceptionally, here the vma is inserted
- * without holding mm->mmap_sem.
+ * Link in the new vma and copy the page table entries.
*/
- spin_lock(&mm->page_table_lock);
*pprev = tmp;
pprev = &tmp->vm_next;
@@ -267,8 +263,7 @@
rb_parent = &tmp->vm_rb;
mm->map_count++;
- retval = copy_page_range(mm, current->mm, tmp);
- spin_unlock(&mm->page_table_lock);
+ retval = copy_page_range(mm, oldmm, tmp);
if (tmp->vm_ops && tmp->vm_ops->open)
tmp->vm_ops->open(tmp);
@@ -277,9 +272,9 @@
goto out;
}
retval = 0;
-
out:
- flush_tlb_mm(current->mm);
+ up_write(&mm->mmap_sem);
+ flush_tlb_mm(oldmm);
up_write(&oldmm->mmap_sem);
return retval;
fail_nomem_policy:
@@ -323,6 +318,8 @@
INIT_LIST_HEAD(&mm->mmlist);
mm->core_waiters = 0;
mm->nr_ptes = 0;
+ set_mm_counter(mm, file_rss, 0);
+ set_mm_counter(mm, anon_rss, 0);
spin_lock_init(&mm->page_table_lock);
rwlock_init(&mm->ioctx_list_lock);
mm->ioctx_list = NULL;
@@ -499,7 +496,7 @@
if (retval)
goto free_pt;
- mm->hiwater_rss = get_mm_counter(mm,rss);
+ mm->hiwater_rss = get_mm_rss(mm);
mm->hiwater_vm = mm->total_vm;
good_mm:
diff --git a/kernel/futex.c b/kernel/futex.c
index ca05fe6..3b4d5ad 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -205,15 +205,13 @@
/*
* Do a quick atomic lookup first - this is the fastpath.
*/
- spin_lock(¤t->mm->page_table_lock);
- page = follow_page(mm, uaddr, 0);
+ page = follow_page(mm, uaddr, FOLL_TOUCH|FOLL_GET);
if (likely(page != NULL)) {
key->shared.pgoff =
page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
- spin_unlock(¤t->mm->page_table_lock);
+ put_page(page);
return 0;
}
- spin_unlock(¤t->mm->page_table_lock);
/*
* Do it the general way.
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 13bcec1..39277dd 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -18,6 +18,7 @@
#include <linux/fs.h>
#include <linux/err.h>
#include <linux/proc_fs.h>
+#include <linux/sched.h> /* for cond_resched */
#include <linux/mm.h>
#include <asm/sections.h>
diff --git a/kernel/kexec.c b/kernel/kexec.c
index cdd4dcd..2c95848 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -90,7 +90,7 @@
static int kimage_is_destination_range(struct kimage *image,
unsigned long start, unsigned long end);
static struct page *kimage_alloc_page(struct kimage *image,
- unsigned int gfp_mask,
+ gfp_t gfp_mask,
unsigned long dest);
static int do_kimage_alloc(struct kimage **rimage, unsigned long entry,
@@ -326,8 +326,7 @@
return 0;
}
-static struct page *kimage_alloc_pages(unsigned int gfp_mask,
- unsigned int order)
+static struct page *kimage_alloc_pages(gfp_t gfp_mask, unsigned int order)
{
struct page *pages;
@@ -335,7 +334,7 @@
if (pages) {
unsigned int count, i;
pages->mapping = NULL;
- pages->private = order;
+ set_page_private(pages, order);
count = 1 << order;
for (i = 0; i < count; i++)
SetPageReserved(pages + i);
@@ -348,7 +347,7 @@
{
unsigned int order, count, i;
- order = page->private;
+ order = page_private(page);
count = 1 << order;
for (i = 0; i < count; i++)
ClearPageReserved(page + i);
@@ -654,7 +653,7 @@
}
static struct page *kimage_alloc_page(struct kimage *image,
- unsigned int gfp_mask,
+ gfp_t gfp_mask,
unsigned long destination)
{
/*
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 44166e3..51a8920 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -131,14 +131,14 @@
static int ____call_usermodehelper(void *data)
{
struct subprocess_info *sub_info = data;
- struct key *old_session;
+ struct key *new_session, *old_session;
int retval;
/* Unblock all signals and set the session keyring. */
- key_get(sub_info->ring);
+ new_session = key_get(sub_info->ring);
flush_signals(current);
spin_lock_irq(¤t->sighand->siglock);
- old_session = __install_session_keyring(current, sub_info->ring);
+ old_session = __install_session_keyring(current, new_session);
flush_signal_handlers(current, 1);
sigemptyset(¤t->blocked);
recalc_sigpending();
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index f3ea492..ce4915d 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -35,6 +35,7 @@
#include <linux/spinlock.h>
#include <linux/hash.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleloader.h>
#include <asm-generic/sections.h>
diff --git a/kernel/kthread.c b/kernel/kthread.c
index f50f174..e75950a 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -165,6 +165,12 @@
int kthread_stop(struct task_struct *k)
{
+ return kthread_stop_sem(k, NULL);
+}
+EXPORT_SYMBOL(kthread_stop);
+
+int kthread_stop_sem(struct task_struct *k, struct semaphore *s)
+{
int ret;
down(&kthread_stop_lock);
@@ -178,7 +184,10 @@
/* Now set kthread_should_stop() to true, and wake it up. */
kthread_stop_info.k = k;
- wake_up_process(k);
+ if (s)
+ up(s);
+ else
+ wake_up_process(k);
put_task_struct(k);
/* Once it dies, reset stop ptr, gather result and we're done. */
@@ -189,7 +198,7 @@
return ret;
}
-EXPORT_SYMBOL(kthread_stop);
+EXPORT_SYMBOL(kthread_stop_sem);
static __init int helper_init(void)
{
diff --git a/kernel/params.c b/kernel/params.c
index 1a8614b..47ba695 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/slab.h>
#if 0
#define DEBUGP printk
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index bf374fc..91a8942 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -1225,7 +1225,7 @@
/*
* The task was cleaned up already, no future firings.
*/
- return;
+ goto out;
/*
* Fetch the current sample and update the timer's expiry time.
@@ -1235,7 +1235,7 @@
bump_cpu_timer(timer, now);
if (unlikely(p->exit_state)) {
clear_dead_task(timer, now);
- return;
+ goto out;
}
read_lock(&tasklist_lock); /* arm_timer needs it. */
} else {
@@ -1248,8 +1248,7 @@
put_task_struct(p);
timer->it.cpu.task = p = NULL;
timer->it.cpu.expires.sched = 0;
- read_unlock(&tasklist_lock);
- return;
+ goto out_unlock;
} else if (unlikely(p->exit_state) && thread_group_empty(p)) {
/*
* We've noticed that the thread is dead, but
@@ -1257,8 +1256,7 @@
* drop our task ref.
*/
clear_dead_task(timer, now);
- read_unlock(&tasklist_lock);
- return;
+ goto out_unlock;
}
cpu_clock_sample_group(timer->it_clock, p, &now);
bump_cpu_timer(timer, now);
@@ -1270,7 +1268,13 @@
*/
arm_timer(timer, now);
+out_unlock:
read_unlock(&tasklist_lock);
+
+out:
+ timer->it_overrun_last = timer->it_overrun;
+ timer->it_overrun = -1;
+ ++timer->it_requeue_pending;
}
/*
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index dda3cda..ea55c7a 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -1295,13 +1295,6 @@
return error;
}
-static void nanosleep_wake_up(unsigned long __data)
-{
- struct task_struct *p = (struct task_struct *) __data;
-
- wake_up_process(p);
-}
-
/*
* The standard says that an absolute nanosleep call MUST wake up at
* the requested time in spite of clock settings. Here is what we do:
@@ -1442,7 +1435,6 @@
int flags, struct timespec *tsave)
{
struct timespec t, dum;
- struct timer_list new_timer;
DECLARE_WAITQUEUE(abs_wqueue, current);
u64 rq_time = (u64)0;
s64 left;
@@ -1451,10 +1443,6 @@
¤t_thread_info()->restart_block;
abs_wqueue.flags = 0;
- init_timer(&new_timer);
- new_timer.expires = 0;
- new_timer.data = (unsigned long) current;
- new_timer.function = nanosleep_wake_up;
abs = flags & TIMER_ABSTIME;
if (restart_block->fn == clock_nanosleep_restart) {
@@ -1490,13 +1478,8 @@
if (left < (s64)0)
break;
- new_timer.expires = jiffies + left;
- __set_current_state(TASK_INTERRUPTIBLE);
- add_timer(&new_timer);
+ schedule_timeout_interruptible(left);
- schedule();
-
- del_timer_sync(&new_timer);
left = rq_time - get_jiffies_64();
} while (left > (s64)0 && !test_thread_flag(TIF_SIGPENDING));
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 2f438d0..c71eb45 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -4,7 +4,7 @@
endif
obj-y := main.o process.o console.o pm.o
-obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o disk.o
+obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o disk.o snapshot.o
obj-$(CONFIG_SUSPEND_SMP) += smp.o
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 761956e..027322a 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -30,7 +30,6 @@
extern int swsusp_read(void);
extern void swsusp_close(void);
extern int swsusp_resume(void);
-extern int swsusp_free(void);
static int noresume = 0;
@@ -93,10 +92,7 @@
printk("Freeing memory... ");
while ((tmp = shrink_all_memory(10000))) {
pages += tmp;
- printk("\b%c", p[i]);
- i++;
- if (i > 3)
- i = 0;
+ printk("\b%c", p[i++ % 4]);
}
printk("\bdone (%li pages freed)\n", pages);
}
@@ -178,13 +174,12 @@
goto Done;
if (in_suspend) {
+ device_resume();
pr_debug("PM: writing image.\n");
error = swsusp_write();
if (!error)
power_down(pm_disk_mode);
else {
- /* swsusp_write can not fail in device_resume,
- no need to do second device_resume */
swsusp_free();
unprepare_processes();
return error;
@@ -252,14 +247,17 @@
pr_debug("PM: Reading swsusp image.\n");
- if ((error = swsusp_read()))
- goto Cleanup;
+ if ((error = swsusp_read())) {
+ swsusp_free();
+ goto Thaw;
+ }
pr_debug("PM: Preparing devices for restore.\n");
if ((error = device_suspend(PMSG_FREEZE))) {
printk("Some devices failed to suspend\n");
- goto Free;
+ swsusp_free();
+ goto Thaw;
}
mb();
@@ -268,9 +266,7 @@
swsusp_resume();
pr_debug("PM: Restore failed, recovering.n");
device_resume();
- Free:
- swsusp_free();
- Cleanup:
+ Thaw:
unprepare_processes();
Done:
/* For success case, the suspend path will release the lock */
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 22bdc93..18d7d69 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -167,6 +167,8 @@
{
int error;
+ if (pm_ops->valid && !pm_ops->valid(state))
+ return -ENODEV;
if (down_trylock(&pm_sem))
return -EBUSY;
@@ -236,7 +238,8 @@
char * s = buf;
for (i = 0; i < PM_SUSPEND_MAX; i++) {
- if (pm_states[i])
+ if (pm_states[i] && pm_ops && (!pm_ops->valid
+ ||(pm_ops->valid && pm_ops->valid(i))))
s += sprintf(s,"%s ",pm_states[i]);
}
s += sprintf(s,"\n");
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 6748de2..d4fd96a 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -53,3 +53,20 @@
extern int pm_prepare_console(void);
extern void pm_restore_console(void);
+
+
+/* References to section boundaries */
+extern const void __nosave_begin, __nosave_end;
+
+extern unsigned int nr_copy_pages;
+extern suspend_pagedir_t *pagedir_nosave;
+extern suspend_pagedir_t *pagedir_save;
+
+extern asmlinkage int swsusp_arch_suspend(void);
+extern asmlinkage int swsusp_arch_resume(void);
+
+extern int restore_highmem(void);
+extern struct pbe * alloc_pagedir(unsigned nr_pages);
+extern void create_pbe_list(struct pbe *pblist, unsigned nr_pages);
+extern void swsusp_free(void);
+extern int enough_swap(unsigned nr_pages);
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
new file mode 100644
index 0000000..42a6287
--- /dev/null
+++ b/kernel/power/snapshot.c
@@ -0,0 +1,435 @@
+/*
+ * linux/kernel/power/snapshot.c
+ *
+ * This file provide system snapshot/restore functionality.
+ *
+ * Copyright (C) 1998-2005 Pavel Machek <pavel@suse.cz>
+ *
+ * This file is released under the GPLv2, and is based on swsusp.c.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/suspend.h>
+#include <linux/smp_lock.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/syscalls.h>
+#include <linux/console.h>
+#include <linux/highmem.h>
+
+#include <asm/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/io.h>
+
+#include "power.h"
+
+#ifdef CONFIG_HIGHMEM
+struct highmem_page {
+ char *data;
+ struct page *page;
+ struct highmem_page *next;
+};
+
+static struct highmem_page *highmem_copy;
+
+static int save_highmem_zone(struct zone *zone)
+{
+ unsigned long zone_pfn;
+ mark_free_pages(zone);
+ for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn) {
+ struct page *page;
+ struct highmem_page *save;
+ void *kaddr;
+ unsigned long pfn = zone_pfn + zone->zone_start_pfn;
+
+ if (!(pfn%1000))
+ printk(".");
+ if (!pfn_valid(pfn))
+ continue;
+ page = pfn_to_page(pfn);
+ /*
+ * This condition results from rvmalloc() sans vmalloc_32()
+ * and architectural memory reservations. This should be
+ * corrected eventually when the cases giving rise to this
+ * are better understood.
+ */
+ if (PageReserved(page)) {
+ printk("highmem reserved page?!\n");
+ continue;
+ }
+ BUG_ON(PageNosave(page));
+ if (PageNosaveFree(page))
+ continue;
+ save = kmalloc(sizeof(struct highmem_page), GFP_ATOMIC);
+ if (!save)
+ return -ENOMEM;
+ save->next = highmem_copy;
+ save->page = page;
+ save->data = (void *) get_zeroed_page(GFP_ATOMIC);
+ if (!save->data) {
+ kfree(save);
+ return -ENOMEM;
+ }
+ kaddr = kmap_atomic(page, KM_USER0);
+ memcpy(save->data, kaddr, PAGE_SIZE);
+ kunmap_atomic(kaddr, KM_USER0);
+ highmem_copy = save;
+ }
+ return 0;
+}
+
+
+static int save_highmem(void)
+{
+ struct zone *zone;
+ int res = 0;
+
+ pr_debug("swsusp: Saving Highmem\n");
+ for_each_zone (zone) {
+ if (is_highmem(zone))
+ res = save_highmem_zone(zone);
+ if (res)
+ return res;
+ }
+ return 0;
+}
+
+int restore_highmem(void)
+{
+ printk("swsusp: Restoring Highmem\n");
+ while (highmem_copy) {
+ struct highmem_page *save = highmem_copy;
+ void *kaddr;
+ highmem_copy = save->next;
+
+ kaddr = kmap_atomic(save->page, KM_USER0);
+ memcpy(kaddr, save->data, PAGE_SIZE);
+ kunmap_atomic(kaddr, KM_USER0);
+ free_page((long) save->data);
+ kfree(save);
+ }
+ return 0;
+}
+#else
+static int save_highmem(void) { return 0; }
+int restore_highmem(void) { return 0; }
+#endif /* CONFIG_HIGHMEM */
+
+
+static int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+ unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
+ return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
+}
+
+/**
+ * saveable - Determine whether a page should be cloned or not.
+ * @pfn: The page
+ *
+ * We save a page if it's Reserved, and not in the range of pages
+ * statically defined as 'unsaveable', or if it isn't reserved, and
+ * isn't part of a free chunk of pages.
+ */
+
+static int saveable(struct zone *zone, unsigned long *zone_pfn)
+{
+ unsigned long pfn = *zone_pfn + zone->zone_start_pfn;
+ struct page *page;
+
+ if (!pfn_valid(pfn))
+ return 0;
+
+ page = pfn_to_page(pfn);
+ BUG_ON(PageReserved(page) && PageNosave(page));
+ if (PageNosave(page))
+ return 0;
+ if (PageReserved(page) && pfn_is_nosave(pfn)) {
+ pr_debug("[nosave pfn 0x%lx]", pfn);
+ return 0;
+ }
+ if (PageNosaveFree(page))
+ return 0;
+
+ return 1;
+}
+
+static unsigned count_data_pages(void)
+{
+ struct zone *zone;
+ unsigned long zone_pfn;
+ unsigned n;
+
+ n = 0;
+ for_each_zone (zone) {
+ if (is_highmem(zone))
+ continue;
+ mark_free_pages(zone);
+ for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn)
+ n += saveable(zone, &zone_pfn);
+ }
+ return n;
+}
+
+static void copy_data_pages(struct pbe *pblist)
+{
+ struct zone *zone;
+ unsigned long zone_pfn;
+ struct pbe *pbe, *p;
+
+ pbe = pblist;
+ for_each_zone (zone) {
+ if (is_highmem(zone))
+ continue;
+ mark_free_pages(zone);
+ /* This is necessary for swsusp_free() */
+ for_each_pb_page (p, pblist)
+ SetPageNosaveFree(virt_to_page(p));
+ for_each_pbe (p, pblist)
+ SetPageNosaveFree(virt_to_page(p->address));
+ for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn) {
+ if (saveable(zone, &zone_pfn)) {
+ struct page *page;
+ page = pfn_to_page(zone_pfn + zone->zone_start_pfn);
+ BUG_ON(!pbe);
+ pbe->orig_address = (unsigned long)page_address(page);
+ /* copy_page is not usable for copying task structs. */
+ memcpy((void *)pbe->address, (void *)pbe->orig_address, PAGE_SIZE);
+ pbe = pbe->next;
+ }
+ }
+ }
+ BUG_ON(pbe);
+}
+
+
+/**
+ * free_pagedir - free pages allocated with alloc_pagedir()
+ */
+
+static void free_pagedir(struct pbe *pblist)
+{
+ struct pbe *pbe;
+
+ while (pblist) {
+ pbe = (pblist + PB_PAGE_SKIP)->next;
+ ClearPageNosave(virt_to_page(pblist));
+ ClearPageNosaveFree(virt_to_page(pblist));
+ free_page((unsigned long)pblist);
+ pblist = pbe;
+ }
+}
+
+/**
+ * fill_pb_page - Create a list of PBEs on a given memory page
+ */
+
+static inline void fill_pb_page(struct pbe *pbpage)
+{
+ struct pbe *p;
+
+ p = pbpage;
+ pbpage += PB_PAGE_SKIP;
+ do
+ p->next = p + 1;
+ while (++p < pbpage);
+}
+
+/**
+ * create_pbe_list - Create a list of PBEs on top of a given chain
+ * of memory pages allocated with alloc_pagedir()
+ */
+
+void create_pbe_list(struct pbe *pblist, unsigned nr_pages)
+{
+ struct pbe *pbpage, *p;
+ unsigned num = PBES_PER_PAGE;
+
+ for_each_pb_page (pbpage, pblist) {
+ if (num >= nr_pages)
+ break;
+
+ fill_pb_page(pbpage);
+ num += PBES_PER_PAGE;
+ }
+ if (pbpage) {
+ for (num -= PBES_PER_PAGE - 1, p = pbpage; num < nr_pages; p++, num++)
+ p->next = p + 1;
+ p->next = NULL;
+ }
+ pr_debug("create_pbe_list(): initialized %d PBEs\n", num);
+}
+
+static void *alloc_image_page(void)
+{
+ void *res = (void *)get_zeroed_page(GFP_ATOMIC | __GFP_COLD);
+ if (res) {
+ SetPageNosave(virt_to_page(res));
+ SetPageNosaveFree(virt_to_page(res));
+ }
+ return res;
+}
+
+/**
+ * alloc_pagedir - Allocate the page directory.
+ *
+ * First, determine exactly how many pages we need and
+ * allocate them.
+ *
+ * We arrange the pages in a chain: each page is an array of PBES_PER_PAGE
+ * struct pbe elements (pbes) and the last element in the page points
+ * to the next page.
+ *
+ * On each page we set up a list of struct_pbe elements.
+ */
+
+struct pbe *alloc_pagedir(unsigned nr_pages)
+{
+ unsigned num;
+ struct pbe *pblist, *pbe;
+
+ if (!nr_pages)
+ return NULL;
+
+ pr_debug("alloc_pagedir(): nr_pages = %d\n", nr_pages);
+ pblist = alloc_image_page();
+ /* FIXME: rewrite this ugly loop */
+ for (pbe = pblist, num = PBES_PER_PAGE; pbe && num < nr_pages;
+ pbe = pbe->next, num += PBES_PER_PAGE) {
+ pbe += PB_PAGE_SKIP;
+ pbe->next = alloc_image_page();
+ }
+ if (!pbe) { /* get_zeroed_page() failed */
+ free_pagedir(pblist);
+ pblist = NULL;
+ }
+ return pblist;
+}
+
+/**
+ * Free pages we allocated for suspend. Suspend pages are alocated
+ * before atomic copy, so we need to free them after resume.
+ */
+
+void swsusp_free(void)
+{
+ struct zone *zone;
+ unsigned long zone_pfn;
+
+ for_each_zone(zone) {
+ for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn)
+ if (pfn_valid(zone_pfn + zone->zone_start_pfn)) {
+ struct page * page;
+ page = pfn_to_page(zone_pfn + zone->zone_start_pfn);
+ if (PageNosave(page) && PageNosaveFree(page)) {
+ ClearPageNosave(page);
+ ClearPageNosaveFree(page);
+ free_page((long) page_address(page));
+ }
+ }
+ }
+}
+
+
+/**
+ * enough_free_mem - Make sure we enough free memory to snapshot.
+ *
+ * Returns TRUE or FALSE after checking the number of available
+ * free pages.
+ */
+
+static int enough_free_mem(unsigned nr_pages)
+{
+ pr_debug("swsusp: available memory: %u pages\n", nr_free_pages());
+ return nr_free_pages() > (nr_pages + PAGES_FOR_IO +
+ (nr_pages + PBES_PER_PAGE - 1) / PBES_PER_PAGE);
+}
+
+
+static struct pbe *swsusp_alloc(unsigned nr_pages)
+{
+ struct pbe *pblist, *p;
+
+ if (!(pblist = alloc_pagedir(nr_pages))) {
+ printk(KERN_ERR "suspend: Allocating pagedir failed.\n");
+ return NULL;
+ }
+ create_pbe_list(pblist, nr_pages);
+
+ for_each_pbe (p, pblist) {
+ p->address = (unsigned long)alloc_image_page();
+ if (!p->address) {
+ printk(KERN_ERR "suspend: Allocating image pages failed.\n");
+ swsusp_free();
+ return NULL;
+ }
+ }
+
+ return pblist;
+}
+
+asmlinkage int swsusp_save(void)
+{
+ unsigned nr_pages;
+
+ pr_debug("swsusp: critical section: \n");
+ if (save_highmem()) {
+ printk(KERN_CRIT "swsusp: Not enough free pages for highmem\n");
+ restore_highmem();
+ return -ENOMEM;
+ }
+
+ drain_local_pages();
+ nr_pages = count_data_pages();
+ printk("swsusp: Need to copy %u pages\n", nr_pages);
+
+ pr_debug("swsusp: pages needed: %u + %lu + %u, free: %u\n",
+ nr_pages,
+ (nr_pages + PBES_PER_PAGE - 1) / PBES_PER_PAGE,
+ PAGES_FOR_IO, nr_free_pages());
+
+ /* This is needed because of the fixed size of swsusp_info */
+ if (MAX_PBES < (nr_pages + PBES_PER_PAGE - 1) / PBES_PER_PAGE)
+ return -ENOSPC;
+
+ if (!enough_free_mem(nr_pages)) {
+ printk(KERN_ERR "swsusp: Not enough free memory\n");
+ return -ENOMEM;
+ }
+
+ if (!enough_swap(nr_pages)) {
+ printk(KERN_ERR "swsusp: Not enough free swap\n");
+ return -ENOSPC;
+ }
+
+ pagedir_nosave = swsusp_alloc(nr_pages);
+ if (!pagedir_nosave)
+ return -ENOMEM;
+
+ /* During allocating of suspend pagedir, new cold pages may appear.
+ * Kill them.
+ */
+ drain_local_pages();
+ copy_data_pages(pagedir_nosave);
+
+ /*
+ * End of critical section. From now on, we can write to memory,
+ * but we should not touch disk. This specially means we must _not_
+ * touch swap space! Except we must write out our image of course.
+ */
+
+ nr_copy_pages = nr_pages;
+
+ printk("swsusp: critical section/: done (%d pages copied)\n", nr_pages);
+ return 0;
+}
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 2d5c456..12db1d2 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -1,11 +1,10 @@
/*
* linux/kernel/power/swsusp.c
*
- * This file is to realize architecture-independent
- * machine suspend feature using pretty near only high-level routines
+ * This file provides code to write suspend image to swap and read it back.
*
* Copyright (C) 1998-2001 Gabor Kuti <seasons@fornax.hu>
- * Copyright (C) 1998,2001-2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz>
*
* This file is released under the GPLv2.
*
@@ -47,11 +46,7 @@
#include <linux/utsname.h>
#include <linux/version.h>
#include <linux/delay.h>
-#include <linux/reboot.h>
#include <linux/bitops.h>
-#include <linux/vt_kern.h>
-#include <linux/kbd_kern.h>
-#include <linux/keyboard.h>
#include <linux/spinlock.h>
#include <linux/genhd.h>
#include <linux/kernel.h>
@@ -63,10 +58,8 @@
#include <linux/swapops.h>
#include <linux/bootmem.h>
#include <linux/syscalls.h>
-#include <linux/console.h>
#include <linux/highmem.h>
#include <linux/bio.h>
-#include <linux/mount.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
@@ -84,16 +77,10 @@
#define MAXKEY 32
#define MAXIV 32
-/* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
-
-/* Variables to be preserved over suspend */
-static int nr_copy_pages_check;
-
extern char resume_file[];
/* Local variables that should not be affected by save */
-static unsigned int nr_copy_pages __nosavedata = 0;
+unsigned int nr_copy_pages __nosavedata = 0;
/* Suspend pagedir is allocated before final copy, therefore it
must be freed after resume
@@ -109,7 +96,7 @@
MMU hardware.
*/
suspend_pagedir_t *pagedir_nosave __nosavedata = NULL;
-static suspend_pagedir_t *pagedir_save;
+suspend_pagedir_t *pagedir_save;
#define SWSUSP_SIG "S1SUSPEND"
@@ -124,12 +111,6 @@
static struct swsusp_info swsusp_info;
/*
- * XXX: We try to keep some more pages free so that I/O operations succeed
- * without paging. Might this be more?
- */
-#define PAGES_FOR_IO 512
-
-/*
* Saving part...
*/
@@ -552,346 +533,6 @@
goto Done;
}
-
-#ifdef CONFIG_HIGHMEM
-struct highmem_page {
- char *data;
- struct page *page;
- struct highmem_page *next;
-};
-
-static struct highmem_page *highmem_copy;
-
-static int save_highmem_zone(struct zone *zone)
-{
- unsigned long zone_pfn;
- mark_free_pages(zone);
- for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn) {
- struct page *page;
- struct highmem_page *save;
- void *kaddr;
- unsigned long pfn = zone_pfn + zone->zone_start_pfn;
-
- if (!(pfn%1000))
- printk(".");
- if (!pfn_valid(pfn))
- continue;
- page = pfn_to_page(pfn);
- /*
- * This condition results from rvmalloc() sans vmalloc_32()
- * and architectural memory reservations. This should be
- * corrected eventually when the cases giving rise to this
- * are better understood.
- */
- if (PageReserved(page)) {
- printk("highmem reserved page?!\n");
- continue;
- }
- BUG_ON(PageNosave(page));
- if (PageNosaveFree(page))
- continue;
- save = kmalloc(sizeof(struct highmem_page), GFP_ATOMIC);
- if (!save)
- return -ENOMEM;
- save->next = highmem_copy;
- save->page = page;
- save->data = (void *) get_zeroed_page(GFP_ATOMIC);
- if (!save->data) {
- kfree(save);
- return -ENOMEM;
- }
- kaddr = kmap_atomic(page, KM_USER0);
- memcpy(save->data, kaddr, PAGE_SIZE);
- kunmap_atomic(kaddr, KM_USER0);
- highmem_copy = save;
- }
- return 0;
-}
-#endif /* CONFIG_HIGHMEM */
-
-
-static int save_highmem(void)
-{
-#ifdef CONFIG_HIGHMEM
- struct zone *zone;
- int res = 0;
-
- pr_debug("swsusp: Saving Highmem\n");
- for_each_zone (zone) {
- if (is_highmem(zone))
- res = save_highmem_zone(zone);
- if (res)
- return res;
- }
-#endif
- return 0;
-}
-
-static int restore_highmem(void)
-{
-#ifdef CONFIG_HIGHMEM
- printk("swsusp: Restoring Highmem\n");
- while (highmem_copy) {
- struct highmem_page *save = highmem_copy;
- void *kaddr;
- highmem_copy = save->next;
-
- kaddr = kmap_atomic(save->page, KM_USER0);
- memcpy(kaddr, save->data, PAGE_SIZE);
- kunmap_atomic(kaddr, KM_USER0);
- free_page((long) save->data);
- kfree(save);
- }
-#endif
- return 0;
-}
-
-
-static int pfn_is_nosave(unsigned long pfn)
-{
- unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
- unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
- return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
-}
-
-/**
- * saveable - Determine whether a page should be cloned or not.
- * @pfn: The page
- *
- * We save a page if it's Reserved, and not in the range of pages
- * statically defined as 'unsaveable', or if it isn't reserved, and
- * isn't part of a free chunk of pages.
- */
-
-static int saveable(struct zone * zone, unsigned long * zone_pfn)
-{
- unsigned long pfn = *zone_pfn + zone->zone_start_pfn;
- struct page * page;
-
- if (!pfn_valid(pfn))
- return 0;
-
- page = pfn_to_page(pfn);
- BUG_ON(PageReserved(page) && PageNosave(page));
- if (PageNosave(page))
- return 0;
- if (PageReserved(page) && pfn_is_nosave(pfn)) {
- pr_debug("[nosave pfn 0x%lx]", pfn);
- return 0;
- }
- if (PageNosaveFree(page))
- return 0;
-
- return 1;
-}
-
-static void count_data_pages(void)
-{
- struct zone *zone;
- unsigned long zone_pfn;
-
- nr_copy_pages = 0;
-
- for_each_zone (zone) {
- if (is_highmem(zone))
- continue;
- mark_free_pages(zone);
- for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn)
- nr_copy_pages += saveable(zone, &zone_pfn);
- }
-}
-
-
-static void copy_data_pages(void)
-{
- struct zone *zone;
- unsigned long zone_pfn;
- struct pbe * pbe = pagedir_nosave;
-
- pr_debug("copy_data_pages(): pages to copy: %d\n", nr_copy_pages);
- for_each_zone (zone) {
- if (is_highmem(zone))
- continue;
- mark_free_pages(zone);
- for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn) {
- if (saveable(zone, &zone_pfn)) {
- struct page * page;
- page = pfn_to_page(zone_pfn + zone->zone_start_pfn);
- BUG_ON(!pbe);
- pbe->orig_address = (long) page_address(page);
- /* copy_page is not usable for copying task structs. */
- memcpy((void *)pbe->address, (void *)pbe->orig_address, PAGE_SIZE);
- pbe = pbe->next;
- }
- }
- }
- BUG_ON(pbe);
-}
-
-
-/**
- * calc_nr - Determine the number of pages needed for a pbe list.
- */
-
-static int calc_nr(int nr_copy)
-{
- return nr_copy + (nr_copy+PBES_PER_PAGE-2)/(PBES_PER_PAGE-1);
-}
-
-/**
- * free_pagedir - free pages allocated with alloc_pagedir()
- */
-
-static inline void free_pagedir(struct pbe *pblist)
-{
- struct pbe *pbe;
-
- while (pblist) {
- pbe = (pblist + PB_PAGE_SKIP)->next;
- free_page((unsigned long)pblist);
- pblist = pbe;
- }
-}
-
-/**
- * fill_pb_page - Create a list of PBEs on a given memory page
- */
-
-static inline void fill_pb_page(struct pbe *pbpage)
-{
- struct pbe *p;
-
- p = pbpage;
- pbpage += PB_PAGE_SKIP;
- do
- p->next = p + 1;
- while (++p < pbpage);
-}
-
-/**
- * create_pbe_list - Create a list of PBEs on top of a given chain
- * of memory pages allocated with alloc_pagedir()
- */
-
-static void create_pbe_list(struct pbe *pblist, unsigned nr_pages)
-{
- struct pbe *pbpage, *p;
- unsigned num = PBES_PER_PAGE;
-
- for_each_pb_page (pbpage, pblist) {
- if (num >= nr_pages)
- break;
-
- fill_pb_page(pbpage);
- num += PBES_PER_PAGE;
- }
- if (pbpage) {
- for (num -= PBES_PER_PAGE - 1, p = pbpage; num < nr_pages; p++, num++)
- p->next = p + 1;
- p->next = NULL;
- }
- pr_debug("create_pbe_list(): initialized %d PBEs\n", num);
-}
-
-/**
- * alloc_pagedir - Allocate the page directory.
- *
- * First, determine exactly how many pages we need and
- * allocate them.
- *
- * We arrange the pages in a chain: each page is an array of PBES_PER_PAGE
- * struct pbe elements (pbes) and the last element in the page points
- * to the next page.
- *
- * On each page we set up a list of struct_pbe elements.
- */
-
-static struct pbe * alloc_pagedir(unsigned nr_pages)
-{
- unsigned num;
- struct pbe *pblist, *pbe;
-
- if (!nr_pages)
- return NULL;
-
- pr_debug("alloc_pagedir(): nr_pages = %d\n", nr_pages);
- pblist = (struct pbe *)get_zeroed_page(GFP_ATOMIC | __GFP_COLD);
- for (pbe = pblist, num = PBES_PER_PAGE; pbe && num < nr_pages;
- pbe = pbe->next, num += PBES_PER_PAGE) {
- pbe += PB_PAGE_SKIP;
- pbe->next = (struct pbe *)get_zeroed_page(GFP_ATOMIC | __GFP_COLD);
- }
- if (!pbe) { /* get_zeroed_page() failed */
- free_pagedir(pblist);
- pblist = NULL;
- }
- return pblist;
-}
-
-/**
- * free_image_pages - Free pages allocated for snapshot
- */
-
-static void free_image_pages(void)
-{
- struct pbe * p;
-
- for_each_pbe (p, pagedir_save) {
- if (p->address) {
- ClearPageNosave(virt_to_page(p->address));
- free_page(p->address);
- p->address = 0;
- }
- }
-}
-
-/**
- * alloc_image_pages - Allocate pages for the snapshot.
- */
-
-static int alloc_image_pages(void)
-{
- struct pbe * p;
-
- for_each_pbe (p, pagedir_save) {
- p->address = get_zeroed_page(GFP_ATOMIC | __GFP_COLD);
- if (!p->address)
- return -ENOMEM;
- SetPageNosave(virt_to_page(p->address));
- }
- return 0;
-}
-
-/* Free pages we allocated for suspend. Suspend pages are alocated
- * before atomic copy, so we need to free them after resume.
- */
-void swsusp_free(void)
-{
- BUG_ON(PageNosave(virt_to_page(pagedir_save)));
- BUG_ON(PageNosaveFree(virt_to_page(pagedir_save)));
- free_image_pages();
- free_pagedir(pagedir_save);
-}
-
-
-/**
- * enough_free_mem - Make sure we enough free memory to snapshot.
- *
- * Returns TRUE or FALSE after checking the number of available
- * free pages.
- */
-
-static int enough_free_mem(void)
-{
- if (nr_free_pages() < (nr_copy_pages + PAGES_FOR_IO)) {
- pr_debug("swsusp: Not enough free pages: Have %d\n",
- nr_free_pages());
- return 0;
- }
- return 1;
-}
-
-
/**
* enough_swap - Make sure we have enough swap to save the image.
*
@@ -902,87 +543,14 @@
* We should only consider resume_device.
*/
-static int enough_swap(void)
+int enough_swap(unsigned nr_pages)
{
struct sysinfo i;
si_swapinfo(&i);
- if (i.freeswap < (nr_copy_pages + PAGES_FOR_IO)) {
- pr_debug("swsusp: Not enough swap. Need %ld\n",i.freeswap);
- return 0;
- }
- return 1;
-}
-
-static int swsusp_alloc(void)
-{
- int error;
-
- pagedir_nosave = NULL;
- nr_copy_pages = calc_nr(nr_copy_pages);
- nr_copy_pages_check = nr_copy_pages;
-
- pr_debug("suspend: (pages needed: %d + %d free: %d)\n",
- nr_copy_pages, PAGES_FOR_IO, nr_free_pages());
-
- if (!enough_free_mem())
- return -ENOMEM;
-
- if (!enough_swap())
- return -ENOSPC;
-
- if (MAX_PBES < nr_copy_pages / PBES_PER_PAGE +
- !!(nr_copy_pages % PBES_PER_PAGE))
- return -ENOSPC;
-
- if (!(pagedir_save = alloc_pagedir(nr_copy_pages))) {
- printk(KERN_ERR "suspend: Allocating pagedir failed.\n");
- return -ENOMEM;
- }
- create_pbe_list(pagedir_save, nr_copy_pages);
- pagedir_nosave = pagedir_save;
- if ((error = alloc_image_pages())) {
- printk(KERN_ERR "suspend: Allocating image pages failed.\n");
- swsusp_free();
- return error;
- }
-
- return 0;
-}
-
-static int suspend_prepare_image(void)
-{
- int error;
-
- pr_debug("swsusp: critical section: \n");
- if (save_highmem()) {
- printk(KERN_CRIT "Suspend machine: Not enough free pages for highmem\n");
- restore_highmem();
- return -ENOMEM;
- }
-
- drain_local_pages();
- count_data_pages();
- printk("swsusp: Need to copy %u pages\n", nr_copy_pages);
-
- error = swsusp_alloc();
- if (error)
- return error;
-
- /* During allocating of suspend pagedir, new cold pages may appear.
- * Kill them.
- */
- drain_local_pages();
- copy_data_pages();
-
- /*
- * End of critical section. From now on, we can write to memory,
- * but we should not touch disk. This specially means we must _not_
- * touch swap space! Except we must write out our image of course.
- */
-
- printk("swsusp: critical section/: done (%d pages copied)\n", nr_copy_pages );
- return 0;
+ pr_debug("swsusp: available swap: %lu pages\n", i.freeswap);
+ return i.freeswap > (nr_pages + PAGES_FOR_IO +
+ (nr_pages + PBES_PER_PAGE - 1) / PBES_PER_PAGE);
}
@@ -994,7 +562,7 @@
int swsusp_write(void)
{
int error;
- device_resume();
+
lock_swapdevices();
error = write_suspend_image();
/* This will unlock ignored swap devices since writing is finished */
@@ -1004,14 +572,6 @@
}
-extern asmlinkage int swsusp_arch_suspend(void);
-extern asmlinkage int swsusp_arch_resume(void);
-
-
-asmlinkage int swsusp_save(void)
-{
- return suspend_prepare_image();
-}
int swsusp_suspend(void)
{
@@ -1043,7 +603,6 @@
printk(KERN_ERR "Error %d suspending\n", error);
/* Restore control flow magically appears here */
restore_processor_state();
- BUG_ON (nr_copy_pages_check != nr_copy_pages);
restore_highmem();
device_power_up();
local_irq_enable();
@@ -1063,6 +622,11 @@
* execution continues at place where swsusp_arch_suspend was called
*/
BUG_ON(!error);
+ /* The only reason why swsusp_arch_resume() can fail is memory being
+ * very tight, so we have to free it as soon as we can to avoid
+ * subsequent failures
+ */
+ swsusp_free();
restore_processor_state();
restore_highmem();
touch_softlockup_watchdog();
@@ -1078,54 +642,28 @@
*
* We don't know which pages are usable until we allocate them.
*
- * Allocated but unusable (ie eaten) memory pages are linked together
- * to create a list, so that we can free them easily
- *
- * We could have used a type other than (void *)
- * for this purpose, but ...
+ * Allocated but unusable (ie eaten) memory pages are marked so that
+ * swsusp_free() can release them
*/
-static void **eaten_memory = NULL;
-static inline void eat_page(void *page)
-{
- void **c;
-
- c = eaten_memory;
- eaten_memory = page;
- *eaten_memory = c;
-}
-
-unsigned long get_usable_page(unsigned gfp_mask)
+unsigned long get_safe_page(gfp_t gfp_mask)
{
unsigned long m;
- m = get_zeroed_page(gfp_mask);
- while (!PageNosaveFree(virt_to_page(m))) {
- eat_page((void *)m);
+ do {
m = get_zeroed_page(gfp_mask);
- if (!m)
- break;
+ if (m && PageNosaveFree(virt_to_page(m)))
+ /* This is for swsusp_free() */
+ SetPageNosave(virt_to_page(m));
+ } while (m && PageNosaveFree(virt_to_page(m)));
+ if (m) {
+ /* This is for swsusp_free() */
+ SetPageNosave(virt_to_page(m));
+ SetPageNosaveFree(virt_to_page(m));
}
return m;
}
-void free_eaten_memory(void)
-{
- unsigned long m;
- void **c;
- int i = 0;
-
- c = eaten_memory;
- while (c) {
- m = (unsigned long)c;
- c = *c;
- free_page(m);
- i++;
- }
- eaten_memory = NULL;
- pr_debug("swsusp: %d unused pages freed\n", i);
-}
-
/**
* check_pagedir - We ensure here that pages that the PBEs point to
* won't collide with pages where we're going to restore from the loaded
@@ -1143,7 +681,7 @@
p->address = 0UL;
for_each_pbe (p, pblist) {
- p->address = get_usable_page(GFP_ATOMIC);
+ p->address = get_safe_page(GFP_ATOMIC);
if (!p->address)
return -ENOMEM;
}
@@ -1162,7 +700,7 @@
unsigned long zone_pfn;
struct pbe *pbpage, *tail, *p;
void *m;
- int rel = 0, error = 0;
+ int rel = 0;
if (!pblist) /* a sanity check */
return NULL;
@@ -1170,41 +708,37 @@
pr_debug("swsusp: Relocating pagedir (%lu pages to check)\n",
swsusp_info.pagedir_pages);
- /* Set page flags */
+ /* Clear page flags */
for_each_zone (zone) {
for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn)
- SetPageNosaveFree(pfn_to_page(zone_pfn +
+ if (pfn_valid(zone_pfn + zone->zone_start_pfn))
+ ClearPageNosaveFree(pfn_to_page(zone_pfn +
zone->zone_start_pfn));
}
- /* Clear orig addresses */
+ /* Mark orig addresses */
for_each_pbe (p, pblist)
- ClearPageNosaveFree(virt_to_page(p->orig_address));
+ SetPageNosaveFree(virt_to_page(p->orig_address));
tail = pblist + PB_PAGE_SKIP;
/* Relocate colliding pages */
for_each_pb_page (pbpage, pblist) {
- if (!PageNosaveFree(virt_to_page((unsigned long)pbpage))) {
- m = (void *)get_usable_page(GFP_ATOMIC | __GFP_COLD);
- if (!m) {
- error = -ENOMEM;
- break;
- }
+ if (PageNosaveFree(virt_to_page((unsigned long)pbpage))) {
+ m = (void *)get_safe_page(GFP_ATOMIC | __GFP_COLD);
+ if (!m)
+ return NULL;
memcpy(m, (void *)pbpage, PAGE_SIZE);
if (pbpage == pblist)
pblist = (struct pbe *)m;
else
tail->next = (struct pbe *)m;
-
- eat_page((void *)pbpage);
pbpage = (struct pbe *)m;
/* We have to link the PBEs again */
-
for (p = pbpage; p < pbpage + PB_PAGE_SKIP; p++)
if (p->next) /* needed to save the end */
p->next = p + 1;
@@ -1214,15 +748,13 @@
tail = pbpage + PB_PAGE_SKIP;
}
- if (error) {
- printk("\nswsusp: Out of memory\n\n");
- free_pagedir(pblist);
- free_eaten_memory();
- pblist = NULL;
- /* Is this even worth handling? It should never ever happen, and we
- have just lost user's state, anyway... */
- } else
- printk("swsusp: Relocated %d pages\n", rel);
+ /* This is for swsusp_free() */
+ for_each_pb_page (pbpage, pblist) {
+ SetPageNosave(virt_to_page(pbpage));
+ SetPageNosaveFree(virt_to_page(pbpage));
+ }
+
+ printk("swsusp: Relocated %d pages\n", rel);
return pblist;
}
@@ -1440,9 +972,7 @@
break;
}
- if (error)
- free_pagedir(pblist);
- else
+ if (!error)
BUG_ON(i != swsusp_info.pagedir_pages);
return error;
@@ -1485,15 +1015,6 @@
if (!error)
error = data_read(pagedir_nosave);
- if (error) { /* We fail cleanly */
- free_eaten_memory();
- for_each_pbe (p, pagedir_nosave)
- if (p->address) {
- free_page(p->address);
- p->address = 0UL;
- }
- free_pagedir(pagedir_nosave);
- }
return error;
}
diff --git a/kernel/printk.c b/kernel/printk.c
index 4b8f0f9..3cb9708 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -10,7 +10,7 @@
* elsewhere, in preparation for a serial line console (someday).
* Ted Ts'o, 2/11/93.
* Modified for sysctl support, 1/8/97, Chris Horn.
- * Fixed SMP synchronization, 08/08/99, Manfred Spraul
+ * Fixed SMP synchronization, 08/08/99, Manfred Spraul
* manfreds@colorfullife.com
* Rewrote bits to get rid of console_lock
* 01Mar01 Andrew Morton <andrewm@uow.edu.au>
@@ -148,7 +148,7 @@
if (!strcmp(str, "ttyb"))
strcpy(name, "ttyS1");
#endif
- for(s = name; *s; s++)
+ for (s = name; *s; s++)
if ((*s >= '0' && *s <= '9') || *s == ',')
break;
idx = simple_strtoul(s, NULL, 10);
@@ -169,11 +169,11 @@
size = roundup_pow_of_two(size);
if (size > log_buf_len) {
unsigned long start, dest_idx, offset;
- char * new_log_buf;
+ char *new_log_buf;
new_log_buf = alloc_bootmem(size);
if (!new_log_buf) {
- printk("log_buf_len: allocation failed\n");
+ printk(KERN_WARNING "log_buf_len: allocation failed\n");
goto out;
}
@@ -193,10 +193,9 @@
log_end -= offset;
spin_unlock_irqrestore(&logbuf_lock, flags);
- printk("log_buf_len: %d\n", log_buf_len);
+ printk(KERN_NOTICE "log_buf_len: %d\n", log_buf_len);
}
out:
-
return 1;
}
@@ -217,7 +216,7 @@
* 9 -- Return number of unread characters in the log buffer
* 10 -- Return size of the log buffer
*/
-int do_syslog(int type, char __user * buf, int len)
+int do_syslog(int type, char __user *buf, int len)
{
unsigned long i, j, limit, count;
int do_clear = 0;
@@ -244,7 +243,8 @@
error = -EFAULT;
goto out;
}
- error = wait_event_interruptible(log_wait, (log_start - log_end));
+ error = wait_event_interruptible(log_wait,
+ (log_start - log_end));
if (error)
goto out;
i = 0;
@@ -264,7 +264,7 @@
error = i;
break;
case 4: /* Read/clear last kernel messages */
- do_clear = 1;
+ do_clear = 1;
/* FALL THRU */
case 3: /* Read last kernel messages */
error = -EINVAL;
@@ -288,11 +288,11 @@
limit = log_end;
/*
* __put_user() could sleep, and while we sleep
- * printk() could overwrite the messages
+ * printk() could overwrite the messages
* we try to copy to user space. Therefore
* the messages are copied in reverse. <manfreds>
*/
- for(i = 0; i < count && !error; i++) {
+ for (i = 0; i < count && !error; i++) {
j = limit-1-i;
if (j + log_buf_len < log_end)
break;
@@ -306,10 +306,10 @@
if (error)
break;
error = i;
- if(i != count) {
+ if (i != count) {
int offset = count-error;
/* buffer overflow during copy, correct user buffer. */
- for(i=0;i<error;i++) {
+ for (i = 0; i < error; i++) {
if (__get_user(c,&buf[i+offset]) ||
__put_user(c,&buf[i])) {
error = -EFAULT;
@@ -351,7 +351,7 @@
return error;
}
-asmlinkage long sys_syslog(int type, char __user * buf, int len)
+asmlinkage long sys_syslog(int type, char __user *buf, int len)
{
return do_syslog(type, buf, len);
}
@@ -404,21 +404,19 @@
cur_index = start;
start_print = start;
while (cur_index != end) {
- if ( msg_level < 0 &&
- ((end - cur_index) > 2) &&
- LOG_BUF(cur_index + 0) == '<' &&
- LOG_BUF(cur_index + 1) >= '0' &&
- LOG_BUF(cur_index + 1) <= '7' &&
- LOG_BUF(cur_index + 2) == '>')
- {
+ if (msg_level < 0 && ((end - cur_index) > 2) &&
+ LOG_BUF(cur_index + 0) == '<' &&
+ LOG_BUF(cur_index + 1) >= '0' &&
+ LOG_BUF(cur_index + 1) <= '7' &&
+ LOG_BUF(cur_index + 2) == '>') {
msg_level = LOG_BUF(cur_index + 1) - '0';
cur_index += 3;
start_print = cur_index;
}
while (cur_index != end) {
char c = LOG_BUF(cur_index);
- cur_index++;
+ cur_index++;
if (c == '\n') {
if (msg_level < 0) {
/*
@@ -461,7 +459,7 @@
static unsigned long oops_timestamp;
if (time_after_eq(jiffies, oops_timestamp) &&
- !time_after(jiffies, oops_timestamp + 30*HZ))
+ !time_after(jiffies, oops_timestamp + 30 * HZ))
return;
oops_timestamp = jiffies;
@@ -495,7 +493,7 @@
/*
* This is printk. It can be called from any context. We want it to work.
- *
+ *
* We try to grab the console_sem. If we succeed, it's easy - we log the output and
* call the console drivers. If we fail to get the semaphore we place the output
* into the log buffer and return. The current holder of the console_sem will
@@ -639,13 +637,19 @@
#else
-asmlinkage long sys_syslog(int type, char __user * buf, int len)
+asmlinkage long sys_syslog(int type, char __user *buf, int len)
{
return 0;
}
-int do_syslog(int type, char __user * buf, int len) { return 0; }
-static void call_console_drivers(unsigned long start, unsigned long end) {}
+int do_syslog(int type, char __user *buf, int len)
+{
+ return 0;
+}
+
+static void call_console_drivers(unsigned long start, unsigned long end)
+{
+}
#endif
@@ -851,9 +855,9 @@
* print any messages that were printed by the kernel before the
* console driver was initialized.
*/
-void register_console(struct console * console)
+void register_console(struct console *console)
{
- int i;
+ int i;
unsigned long flags;
if (preferred_console < 0)
@@ -878,7 +882,8 @@
* See if this console matches one we selected on
* the command line.
*/
- for(i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) {
+ for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0];
+ i++) {
if (strcmp(console_cmdline[i].name, console->name) != 0)
continue;
if (console->index >= 0 &&
@@ -933,9 +938,9 @@
}
EXPORT_SYMBOL(register_console);
-int unregister_console(struct console * console)
+int unregister_console(struct console *console)
{
- struct console *a,*b;
+ struct console *a, *b;
int res = 1;
acquire_console_sem();
@@ -949,10 +954,10 @@
b->next = a->next;
res = 0;
break;
- }
+ }
}
}
-
+
/* If last console is removed, we re-enable picking the first
* one that gets registered. Without that, pmac early boot console
* would prevent fbcon from taking over.
@@ -994,7 +999,7 @@
int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst)
{
static DEFINE_SPINLOCK(ratelimit_lock);
- static unsigned long toks = 10*5*HZ;
+ static unsigned long toks = 10 * 5 * HZ;
static unsigned long last_msg;
static int missed;
unsigned long flags;
@@ -1007,6 +1012,7 @@
toks = ratelimit_burst * ratelimit_jiffies;
if (toks >= ratelimit_jiffies) {
int lost = missed;
+
missed = 0;
toks -= ratelimit_jiffies;
spin_unlock_irqrestore(&ratelimit_lock, flags);
@@ -1021,7 +1027,7 @@
EXPORT_SYMBOL(__printk_ratelimit);
/* minimum time in jiffies between messages */
-int printk_ratelimit_jiffies = 5*HZ;
+int printk_ratelimit_jiffies = 5 * HZ;
/* number of messages we send before ratelimiting */
int printk_ratelimit_burst = 10;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 019e04e..863eee8 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -56,6 +56,10 @@
signal_wake_up(child, 1);
}
}
+ if (child->signal->flags & SIGNAL_GROUP_EXIT) {
+ sigaddset(&child->pending.signal, SIGKILL);
+ signal_wake_up(child, 1);
+ }
spin_unlock(&child->sighand->siglock);
}
@@ -77,8 +81,7 @@
SET_LINKS(child);
}
- if (child->state == TASK_TRACED)
- ptrace_untrace(child);
+ ptrace_untrace(child);
}
/*
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 2559d4b..c4d159a 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -154,6 +154,15 @@
}
/*
+ * Return the number of RCU batches processed thus far. Useful
+ * for debug and statistics.
+ */
+long rcu_batches_completed(void)
+{
+ return rcu_ctrlblk.completed;
+}
+
+/*
* Invoke the completed RCU callbacks. They are expected to be in
* a per-cpu list.
*/
@@ -501,6 +510,7 @@
}
module_param(maxbatch, int, 0);
+EXPORT_SYMBOL_GPL(rcu_batches_completed);
EXPORT_SYMBOL(call_rcu); /* WARNING: GPL-only in April 2006. */
EXPORT_SYMBOL(call_rcu_bh); /* WARNING: GPL-only in April 2006. */
EXPORT_SYMBOL_GPL(synchronize_rcu);
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
new file mode 100644
index 0000000..9b58f1e
--- /dev/null
+++ b/kernel/rcutorture.c
@@ -0,0 +1,492 @@
+/*
+ * Read-Copy Update /proc-based torture test facility
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2005
+ *
+ * Authors: Paul E. McKenney <paulmck@us.ibm.com>
+ *
+ * See also: Documentation/RCU/torture.txt
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/rcupdate.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <asm/atomic.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/moduleparam.h>
+#include <linux/percpu.h>
+#include <linux/notifier.h>
+#include <linux/rcuref.h>
+#include <linux/cpu.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+#include <linux/byteorder/swabb.h>
+#include <linux/stat.h>
+
+MODULE_LICENSE("GPL");
+
+static int nreaders = -1; /* # reader threads, defaults to 4*ncpus */
+static int stat_interval = 0; /* Interval between stats, in seconds. */
+ /* Defaults to "only at end of test". */
+static int verbose = 0; /* Print more debug info. */
+
+MODULE_PARM(nreaders, "i");
+MODULE_PARM_DESC(nreaders, "Number of RCU reader threads");
+MODULE_PARM(stat_interval, "i");
+MODULE_PARM_DESC(stat_interval, "Number of seconds between stats printk()s");
+MODULE_PARM(verbose, "i");
+MODULE_PARM_DESC(verbose, "Enable verbose debugging printk()s");
+#define TORTURE_FLAG "rcutorture: "
+#define PRINTK_STRING(s) \
+ do { printk(KERN_ALERT TORTURE_FLAG s "\n"); } while (0)
+#define VERBOSE_PRINTK_STRING(s) \
+ do { if (verbose) printk(KERN_ALERT TORTURE_FLAG s "\n"); } while (0)
+#define VERBOSE_PRINTK_ERRSTRING(s) \
+ do { if (verbose) printk(KERN_ALERT TORTURE_FLAG "!!! " s "\n"); } while (0)
+
+static char printk_buf[4096];
+
+static int nrealreaders;
+static struct task_struct *writer_task;
+static struct task_struct **reader_tasks;
+static struct task_struct *stats_task;
+
+#define RCU_TORTURE_PIPE_LEN 10
+
+struct rcu_torture {
+ struct rcu_head rtort_rcu;
+ int rtort_pipe_count;
+ struct list_head rtort_free;
+};
+
+static int fullstop = 0; /* stop generating callbacks at test end. */
+static LIST_HEAD(rcu_torture_freelist);
+static struct rcu_torture *rcu_torture_current = NULL;
+static long rcu_torture_current_version = 0;
+static struct rcu_torture rcu_tortures[10 * RCU_TORTURE_PIPE_LEN];
+static DEFINE_SPINLOCK(rcu_torture_lock);
+static DEFINE_PER_CPU(long [RCU_TORTURE_PIPE_LEN + 1], rcu_torture_count) =
+ { 0 };
+static DEFINE_PER_CPU(long [RCU_TORTURE_PIPE_LEN + 1], rcu_torture_batch) =
+ { 0 };
+static atomic_t rcu_torture_wcount[RCU_TORTURE_PIPE_LEN + 1];
+atomic_t n_rcu_torture_alloc;
+atomic_t n_rcu_torture_alloc_fail;
+atomic_t n_rcu_torture_free;
+
+/*
+ * Allocate an element from the rcu_tortures pool.
+ */
+struct rcu_torture *
+rcu_torture_alloc(void)
+{
+ struct list_head *p;
+
+ spin_lock(&rcu_torture_lock);
+ if (list_empty(&rcu_torture_freelist)) {
+ atomic_inc(&n_rcu_torture_alloc_fail);
+ spin_unlock(&rcu_torture_lock);
+ return NULL;
+ }
+ atomic_inc(&n_rcu_torture_alloc);
+ p = rcu_torture_freelist.next;
+ list_del_init(p);
+ spin_unlock(&rcu_torture_lock);
+ return container_of(p, struct rcu_torture, rtort_free);
+}
+
+/*
+ * Free an element to the rcu_tortures pool.
+ */
+static void
+rcu_torture_free(struct rcu_torture *p)
+{
+ atomic_inc(&n_rcu_torture_free);
+ spin_lock(&rcu_torture_lock);
+ list_add_tail(&p->rtort_free, &rcu_torture_freelist);
+ spin_unlock(&rcu_torture_lock);
+}
+
+static void
+rcu_torture_cb(struct rcu_head *p)
+{
+ int i;
+ struct rcu_torture *rp = container_of(p, struct rcu_torture, rtort_rcu);
+
+ if (fullstop) {
+ /* Test is ending, just drop callbacks on the floor. */
+ /* The next initialization will pick up the pieces. */
+ return;
+ }
+ i = rp->rtort_pipe_count;
+ if (i > RCU_TORTURE_PIPE_LEN)
+ i = RCU_TORTURE_PIPE_LEN;
+ atomic_inc(&rcu_torture_wcount[i]);
+ if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN)
+ rcu_torture_free(rp);
+ else
+ call_rcu(p, rcu_torture_cb);
+}
+
+struct rcu_random_state {
+ unsigned long rrs_state;
+ unsigned long rrs_count;
+};
+
+#define RCU_RANDOM_MULT 39916801 /* prime */
+#define RCU_RANDOM_ADD 479001701 /* prime */
+#define RCU_RANDOM_REFRESH 10000
+
+#define DEFINE_RCU_RANDOM(name) struct rcu_random_state name = { 0, 0 }
+
+/*
+ * Crude but fast random-number generator. Uses a linear congruential
+ * generator, with occasional help from get_random_bytes().
+ */
+static long
+rcu_random(struct rcu_random_state *rrsp)
+{
+ long refresh;
+
+ if (--rrsp->rrs_count < 0) {
+ get_random_bytes(&refresh, sizeof(refresh));
+ rrsp->rrs_state += refresh;
+ rrsp->rrs_count = RCU_RANDOM_REFRESH;
+ }
+ rrsp->rrs_state = rrsp->rrs_state * RCU_RANDOM_MULT + RCU_RANDOM_ADD;
+ return swahw32(rrsp->rrs_state);
+}
+
+/*
+ * RCU torture writer kthread. Repeatedly substitutes a new structure
+ * for that pointed to by rcu_torture_current, freeing the old structure
+ * after a series of grace periods (the "pipeline").
+ */
+static int
+rcu_torture_writer(void *arg)
+{
+ int i;
+ long oldbatch = rcu_batches_completed();
+ struct rcu_torture *rp;
+ struct rcu_torture *old_rp;
+ static DEFINE_RCU_RANDOM(rand);
+
+ VERBOSE_PRINTK_STRING("rcu_torture_writer task started");
+ do {
+ schedule_timeout_uninterruptible(1);
+ if (rcu_batches_completed() == oldbatch)
+ continue;
+ if ((rp = rcu_torture_alloc()) == NULL)
+ continue;
+ rp->rtort_pipe_count = 0;
+ udelay(rcu_random(&rand) & 0x3ff);
+ old_rp = rcu_torture_current;
+ rcu_assign_pointer(rcu_torture_current, rp);
+ smp_wmb();
+ if (old_rp != NULL) {
+ i = old_rp->rtort_pipe_count;
+ if (i > RCU_TORTURE_PIPE_LEN)
+ i = RCU_TORTURE_PIPE_LEN;
+ atomic_inc(&rcu_torture_wcount[i]);
+ old_rp->rtort_pipe_count++;
+ call_rcu(&old_rp->rtort_rcu, rcu_torture_cb);
+ }
+ rcu_torture_current_version++;
+ oldbatch = rcu_batches_completed();
+ } while (!kthread_should_stop() && !fullstop);
+ VERBOSE_PRINTK_STRING("rcu_torture_writer task stopping");
+ while (!kthread_should_stop())
+ schedule_timeout_uninterruptible(1);
+ return 0;
+}
+
+/*
+ * RCU torture reader kthread. Repeatedly dereferences rcu_torture_current,
+ * incrementing the corresponding element of the pipeline array. The
+ * counter in the element should never be greater than 1, otherwise, the
+ * RCU implementation is broken.
+ */
+static int
+rcu_torture_reader(void *arg)
+{
+ int completed;
+ DEFINE_RCU_RANDOM(rand);
+ struct rcu_torture *p;
+ int pipe_count;
+
+ VERBOSE_PRINTK_STRING("rcu_torture_reader task started");
+ do {
+ rcu_read_lock();
+ completed = rcu_batches_completed();
+ p = rcu_dereference(rcu_torture_current);
+ if (p == NULL) {
+ /* Wait for rcu_torture_writer to get underway */
+ rcu_read_unlock();
+ schedule_timeout_interruptible(HZ);
+ continue;
+ }
+ udelay(rcu_random(&rand) & 0x7f);
+ preempt_disable();
+ pipe_count = p->rtort_pipe_count;
+ if (pipe_count > RCU_TORTURE_PIPE_LEN) {
+ /* Should not happen, but... */
+ pipe_count = RCU_TORTURE_PIPE_LEN;
+ }
+ ++__get_cpu_var(rcu_torture_count)[pipe_count];
+ completed = rcu_batches_completed() - completed;
+ if (completed > RCU_TORTURE_PIPE_LEN) {
+ /* Should not happen, but... */
+ completed = RCU_TORTURE_PIPE_LEN;
+ }
+ ++__get_cpu_var(rcu_torture_batch)[completed];
+ preempt_enable();
+ rcu_read_unlock();
+ schedule();
+ } while (!kthread_should_stop() && !fullstop);
+ VERBOSE_PRINTK_STRING("rcu_torture_reader task stopping");
+ while (!kthread_should_stop())
+ schedule_timeout_uninterruptible(1);
+ return 0;
+}
+
+/*
+ * Create an RCU-torture statistics message in the specified buffer.
+ */
+static int
+rcu_torture_printk(char *page)
+{
+ int cnt = 0;
+ int cpu;
+ int i;
+ long pipesummary[RCU_TORTURE_PIPE_LEN + 1] = { 0 };
+ long batchsummary[RCU_TORTURE_PIPE_LEN + 1] = { 0 };
+
+ for_each_cpu(cpu) {
+ for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) {
+ pipesummary[i] += per_cpu(rcu_torture_count, cpu)[i];
+ batchsummary[i] += per_cpu(rcu_torture_batch, cpu)[i];
+ }
+ }
+ for (i = RCU_TORTURE_PIPE_LEN - 1; i >= 0; i--) {
+ if (pipesummary[i] != 0)
+ break;
+ }
+ cnt += sprintf(&page[cnt], "rcutorture: ");
+ cnt += sprintf(&page[cnt],
+ "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d",
+ rcu_torture_current,
+ rcu_torture_current_version,
+ list_empty(&rcu_torture_freelist),
+ atomic_read(&n_rcu_torture_alloc),
+ atomic_read(&n_rcu_torture_alloc_fail),
+ atomic_read(&n_rcu_torture_free));
+ cnt += sprintf(&page[cnt], "\nrcutorture: ");
+ if (i > 1)
+ cnt += sprintf(&page[cnt], "!!! ");
+ cnt += sprintf(&page[cnt], "Reader Pipe: ");
+ for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
+ cnt += sprintf(&page[cnt], " %ld", pipesummary[i]);
+ cnt += sprintf(&page[cnt], "\nrcutorture: ");
+ cnt += sprintf(&page[cnt], "Reader Batch: ");
+ for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++)
+ cnt += sprintf(&page[cnt], " %ld", batchsummary[i]);
+ cnt += sprintf(&page[cnt], "\nrcutorture: ");
+ cnt += sprintf(&page[cnt], "Free-Block Circulation: ");
+ for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) {
+ cnt += sprintf(&page[cnt], " %d",
+ atomic_read(&rcu_torture_wcount[i]));
+ }
+ cnt += sprintf(&page[cnt], "\n");
+ return cnt;
+}
+
+/*
+ * Print torture statistics. Caller must ensure that there is only
+ * one call to this function at a given time!!! This is normally
+ * accomplished by relying on the module system to only have one copy
+ * of the module loaded, and then by giving the rcu_torture_stats
+ * kthread full control (or the init/cleanup functions when rcu_torture_stats
+ * thread is not running).
+ */
+static void
+rcu_torture_stats_print(void)
+{
+ int cnt;
+
+ cnt = rcu_torture_printk(printk_buf);
+ printk(KERN_ALERT "%s", printk_buf);
+}
+
+/*
+ * Periodically prints torture statistics, if periodic statistics printing
+ * was specified via the stat_interval module parameter.
+ *
+ * No need to worry about fullstop here, since this one doesn't reference
+ * volatile state or register callbacks.
+ */
+static int
+rcu_torture_stats(void *arg)
+{
+ VERBOSE_PRINTK_STRING("rcu_torture_stats task started");
+ do {
+ schedule_timeout_interruptible(stat_interval * HZ);
+ rcu_torture_stats_print();
+ } while (!kthread_should_stop());
+ VERBOSE_PRINTK_STRING("rcu_torture_stats task stopping");
+ return 0;
+}
+
+static void
+rcu_torture_cleanup(void)
+{
+ int i;
+
+ fullstop = 1;
+ if (writer_task != NULL) {
+ VERBOSE_PRINTK_STRING("Stopping rcu_torture_writer task");
+ kthread_stop(writer_task);
+ }
+ writer_task = NULL;
+
+ if (reader_tasks != NULL) {
+ for (i = 0; i < nrealreaders; i++) {
+ if (reader_tasks[i] != NULL) {
+ VERBOSE_PRINTK_STRING(
+ "Stopping rcu_torture_reader task");
+ kthread_stop(reader_tasks[i]);
+ }
+ reader_tasks[i] = NULL;
+ }
+ kfree(reader_tasks);
+ reader_tasks = NULL;
+ }
+ rcu_torture_current = NULL;
+
+ if (stats_task != NULL) {
+ VERBOSE_PRINTK_STRING("Stopping rcu_torture_stats task");
+ kthread_stop(stats_task);
+ }
+ stats_task = NULL;
+
+ /* Wait for all RCU callbacks to fire. */
+
+ for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++)
+ synchronize_rcu();
+ rcu_torture_stats_print(); /* -After- the stats thread is stopped! */
+ PRINTK_STRING("--- End of test");
+}
+
+static int
+rcu_torture_init(void)
+{
+ int i;
+ int cpu;
+ int firsterr = 0;
+
+ /* Process args and tell the world that the torturer is on the job. */
+
+ if (nreaders >= 0)
+ nrealreaders = nreaders;
+ else
+ nrealreaders = 2 * num_online_cpus();
+ printk(KERN_ALERT TORTURE_FLAG
+ "--- Start of test: nreaders=%d stat_interval=%d verbose=%d\n",
+ nrealreaders, stat_interval, verbose);
+ fullstop = 0;
+
+ /* Set up the freelist. */
+
+ INIT_LIST_HEAD(&rcu_torture_freelist);
+ for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) {
+ list_add_tail(&rcu_tortures[i].rtort_free,
+ &rcu_torture_freelist);
+ }
+
+ /* Initialize the statistics so that each run gets its own numbers. */
+
+ rcu_torture_current = NULL;
+ rcu_torture_current_version = 0;
+ atomic_set(&n_rcu_torture_alloc, 0);
+ atomic_set(&n_rcu_torture_alloc_fail, 0);
+ atomic_set(&n_rcu_torture_free, 0);
+ for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
+ atomic_set(&rcu_torture_wcount[i], 0);
+ for_each_cpu(cpu) {
+ for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) {
+ per_cpu(rcu_torture_count, cpu)[i] = 0;
+ per_cpu(rcu_torture_batch, cpu)[i] = 0;
+ }
+ }
+
+ /* Start up the kthreads. */
+
+ VERBOSE_PRINTK_STRING("Creating rcu_torture_writer task");
+ writer_task = kthread_run(rcu_torture_writer, NULL,
+ "rcu_torture_writer");
+ if (IS_ERR(writer_task)) {
+ firsterr = PTR_ERR(writer_task);
+ VERBOSE_PRINTK_ERRSTRING("Failed to create writer");
+ writer_task = NULL;
+ goto unwind;
+ }
+ reader_tasks = kmalloc(nrealreaders * sizeof(reader_tasks[0]),
+ GFP_KERNEL);
+ if (reader_tasks == NULL) {
+ VERBOSE_PRINTK_ERRSTRING("out of memory");
+ firsterr = -ENOMEM;
+ goto unwind;
+ }
+ for (i = 0; i < nrealreaders; i++) {
+ VERBOSE_PRINTK_STRING("Creating rcu_torture_reader task");
+ reader_tasks[i] = kthread_run(rcu_torture_reader, NULL,
+ "rcu_torture_reader");
+ if (IS_ERR(reader_tasks[i])) {
+ firsterr = PTR_ERR(reader_tasks[i]);
+ VERBOSE_PRINTK_ERRSTRING("Failed to create reader");
+ reader_tasks[i] = NULL;
+ goto unwind;
+ }
+ }
+ if (stat_interval > 0) {
+ VERBOSE_PRINTK_STRING("Creating rcu_torture_stats task");
+ stats_task = kthread_run(rcu_torture_stats, NULL,
+ "rcu_torture_stats");
+ if (IS_ERR(stats_task)) {
+ firsterr = PTR_ERR(stats_task);
+ VERBOSE_PRINTK_ERRSTRING("Failed to create stats");
+ stats_task = NULL;
+ goto unwind;
+ }
+ }
+ return 0;
+
+unwind:
+ rcu_torture_cleanup();
+ return firsterr;
+}
+
+module_init(rcu_torture_init);
+module_exit(rcu_torture_cleanup);
diff --git a/kernel/sched.c b/kernel/sched.c
index 1e5cafd..340dd23 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2511,8 +2511,6 @@
cpustat->idle = cputime64_add(cpustat->idle, tmp);
/* Account for system time used */
acct_update_integrals(p);
- /* Update rss highwater mark */
- update_mem_hiwater(p);
}
/*
@@ -3879,7 +3877,6 @@
#ifndef CONFIG_SMP
cpumask_t cpu_online_map = CPU_MASK_ALL;
-EXPORT_SYMBOL_GPL(cpu_online_map);
cpumask_t cpu_possible_map = CPU_MASK_ALL;
#endif
diff --git a/kernel/signal.c b/kernel/signal.c
index f2b96b0..1bf3c39 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -277,7 +277,6 @@
} else {
INIT_LIST_HEAD(&q->list);
q->flags = 0;
- q->lock = NULL;
q->user = get_uid(t->user);
}
return(q);
@@ -406,6 +405,8 @@
void exit_signal(struct task_struct *tsk)
{
+ atomic_dec(&tsk->signal->live);
+
write_lock_irq(&tasklist_lock);
__exit_signal(tsk);
write_unlock_irq(&tasklist_lock);
@@ -650,8 +651,7 @@
if (!valid_signal(sig))
return error;
error = -EPERM;
- if ((!info || ((unsigned long)info != 1 &&
- (unsigned long)info != 2 && SI_FROMUSER(info)))
+ if ((info == SEND_SIG_NOINFO || (!is_si_special(info) && SI_FROMUSER(info)))
&& ((sig != SIGCONT) ||
(current->signal->session != t->signal->session))
&& (current->euid ^ t->suid) && (current->euid ^ t->uid)
@@ -788,7 +788,7 @@
* fast-pathed signals for kernel-internal things like SIGSTOP
* or SIGKILL.
*/
- if ((unsigned long)info == 2)
+ if (info == SEND_SIG_FORCED)
goto out_set;
/* Real-time signals must be queued if sent by sigqueue, or
@@ -800,19 +800,19 @@
pass on the info struct. */
q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
- ((unsigned long) info < 2 ||
+ (is_si_special(info) ||
info->si_code >= 0)));
if (q) {
list_add_tail(&q->list, &signals->list);
switch ((unsigned long) info) {
- case 0:
+ case (unsigned long) SEND_SIG_NOINFO:
q->info.si_signo = sig;
q->info.si_errno = 0;
q->info.si_code = SI_USER;
q->info.si_pid = current->pid;
q->info.si_uid = current->uid;
break;
- case 1:
+ case (unsigned long) SEND_SIG_PRIV:
q->info.si_signo = sig;
q->info.si_errno = 0;
q->info.si_code = SI_KERNEL;
@@ -823,20 +823,13 @@
copy_siginfo(&q->info, info);
break;
}
- } else {
- if (sig >= SIGRTMIN && info && (unsigned long)info != 1
- && info->si_code != SI_USER)
+ } else if (!is_si_special(info)) {
+ if (sig >= SIGRTMIN && info->si_code != SI_USER)
/*
* Queue overflow, abort. We may abort if the signal was rt
* and sent by user using something other than kill().
*/
return -EAGAIN;
- if (((unsigned long)info > 1) && (info->si_code == SI_TIMER))
- /*
- * Set up a return to indicate that we dropped
- * the signal.
- */
- ret = info->si_sys_private;
}
out_set:
@@ -857,12 +850,6 @@
BUG();
assert_spin_locked(&t->sighand->siglock);
- if (((unsigned long)info > 2) && (info->si_code == SI_TIMER))
- /*
- * Set up a return to indicate that we dropped the signal.
- */
- ret = info->si_sys_private;
-
/* Short-circuit ignored signals. */
if (sig_ignored(t, sig))
goto out;
@@ -892,11 +879,13 @@
int ret;
spin_lock_irqsave(&t->sighand->siglock, flags);
- if (sigismember(&t->blocked, sig) || t->sighand->action[sig-1].sa.sa_handler == SIG_IGN) {
+ if (t->sighand->action[sig-1].sa.sa_handler == SIG_IGN) {
t->sighand->action[sig-1].sa.sa_handler = SIG_DFL;
- sigdelset(&t->blocked, sig);
- recalc_sigpending_tsk(t);
}
+ if (sigismember(&t->blocked, sig)) {
+ sigdelset(&t->blocked, sig);
+ }
+ recalc_sigpending_tsk(t);
ret = specific_send_sig_info(sig, info, t);
spin_unlock_irqrestore(&t->sighand->siglock, flags);
@@ -906,15 +895,7 @@
void
force_sig_specific(int sig, struct task_struct *t)
{
- unsigned long int flags;
-
- spin_lock_irqsave(&t->sighand->siglock, flags);
- if (t->sighand->action[sig-1].sa.sa_handler == SIG_IGN)
- t->sighand->action[sig-1].sa.sa_handler = SIG_DFL;
- sigdelset(&t->blocked, sig);
- recalc_sigpending_tsk(t);
- specific_send_sig_info(sig, (void *)2, t);
- spin_unlock_irqrestore(&t->sighand->siglock, flags);
+ force_sig_info(sig, SEND_SIG_FORCED, t);
}
/*
@@ -1049,12 +1030,6 @@
assert_spin_locked(&p->sighand->siglock);
handle_stop_signal(sig, p);
- if (((unsigned long)info > 2) && (info->si_code == SI_TIMER))
- /*
- * Set up a return to indicate that we dropped the signal.
- */
- ret = info->si_sys_private;
-
/* Short-circuit ignored signals. */
if (sig_ignored(p, sig))
return ret;
@@ -1107,8 +1082,8 @@
if (t != p->group_leader)
t->exit_signal = -1;
+ /* SIGKILL will be handled before any pending SIGSTOP */
sigaddset(&t->pending.signal, SIGKILL);
- rm_from_queue(SIG_KERNEL_STOP_MASK, &t->pending);
signal_wake_up(t, 1);
}
}
@@ -1284,10 +1259,13 @@
return ret;
}
+#define __si_special(priv) \
+ ((priv) ? SEND_SIG_PRIV : SEND_SIG_NOINFO)
+
int
send_sig(int sig, struct task_struct *p, int priv)
{
- return send_sig_info(sig, (void*)(long)(priv != 0), p);
+ return send_sig_info(sig, __si_special(priv), p);
}
/*
@@ -1307,7 +1285,7 @@
void
force_sig(int sig, struct task_struct *p)
{
- force_sig_info(sig, (void*)1L, p);
+ force_sig_info(sig, SEND_SIG_PRIV, p);
}
/*
@@ -1332,13 +1310,13 @@
int
kill_pg(pid_t pgrp, int sig, int priv)
{
- return kill_pg_info(sig, (void *)(long)(priv != 0), pgrp);
+ return kill_pg_info(sig, __si_special(priv), pgrp);
}
int
kill_proc(pid_t pid, int sig, int priv)
{
- return kill_proc_info(sig, (void *)(long)(priv != 0), pid);
+ return kill_proc_info(sig, __si_special(priv), pid);
}
/*
@@ -1369,11 +1347,12 @@
* pending queue.
*/
if (unlikely(!list_empty(&q->list))) {
- read_lock(&tasklist_lock);
- spin_lock_irqsave(q->lock, flags);
+ spinlock_t *lock = ¤t->sighand->siglock;
+ read_lock(&tasklist_lock);
+ spin_lock_irqsave(lock, flags);
if (!list_empty(&q->list))
list_del_init(&q->list);
- spin_unlock_irqrestore(q->lock, flags);
+ spin_unlock_irqrestore(lock, flags);
read_unlock(&tasklist_lock);
}
q->flags &= ~SIGQUEUE_PREALLOC;
@@ -1412,7 +1391,6 @@
goto out;
}
- q->lock = &p->sighand->siglock;
list_add_tail(&q->list, &p->pending.list);
sigaddset(&p->pending.signal, sig);
if (!sigismember(&p->blocked, sig))
@@ -1460,7 +1438,6 @@
* We always use the shared queue for process-wide signals,
* to avoid several races.
*/
- q->lock = &p->sighand->siglock;
list_add_tail(&q->list, &p->signal->shared_pending.list);
sigaddset(&p->signal->shared_pending.signal, sig);
@@ -1879,9 +1856,9 @@
/* Let the debugger run. */
ptrace_stop(signr, signr, info);
- /* We're back. Did the debugger cancel the sig? */
+ /* We're back. Did the debugger cancel the sig or group_exit? */
signr = current->exit_code;
- if (signr == 0)
+ if (signr == 0 || current->signal->flags & SIGNAL_GROUP_EXIT)
continue;
current->exit_code = 0;
@@ -2283,6 +2260,39 @@
return kill_something_info(sig, &info, pid);
}
+static int do_tkill(int tgid, int pid, int sig)
+{
+ int error;
+ struct siginfo info;
+ struct task_struct *p;
+
+ error = -ESRCH;
+ info.si_signo = sig;
+ info.si_errno = 0;
+ info.si_code = SI_TKILL;
+ info.si_pid = current->tgid;
+ info.si_uid = current->uid;
+
+ read_lock(&tasklist_lock);
+ p = find_task_by_pid(pid);
+ if (p && (tgid <= 0 || p->tgid == tgid)) {
+ error = check_kill_permission(sig, &info, p);
+ /*
+ * The null signal is a permissions and process existence
+ * probe. No signal is actually delivered.
+ */
+ if (!error && sig && p->sighand) {
+ spin_lock_irq(&p->sighand->siglock);
+ handle_stop_signal(sig, p);
+ error = specific_send_sig_info(sig, &info, p);
+ spin_unlock_irq(&p->sighand->siglock);
+ }
+ }
+ read_unlock(&tasklist_lock);
+
+ return error;
+}
+
/**
* sys_tgkill - send signal to one specific thread
* @tgid: the thread group ID of the thread
@@ -2295,38 +2305,11 @@
*/
asmlinkage long sys_tgkill(int tgid, int pid, int sig)
{
- struct siginfo info;
- int error;
- struct task_struct *p;
-
/* This is only valid for single tasks */
if (pid <= 0 || tgid <= 0)
return -EINVAL;
- info.si_signo = sig;
- info.si_errno = 0;
- info.si_code = SI_TKILL;
- info.si_pid = current->tgid;
- info.si_uid = current->uid;
-
- read_lock(&tasklist_lock);
- p = find_task_by_pid(pid);
- error = -ESRCH;
- if (p && (p->tgid == tgid)) {
- error = check_kill_permission(sig, &info, p);
- /*
- * The null signal is a permissions and process existence
- * probe. No signal is actually delivered.
- */
- if (!error && sig && p->sighand) {
- spin_lock_irq(&p->sighand->siglock);
- handle_stop_signal(sig, p);
- error = specific_send_sig_info(sig, &info, p);
- spin_unlock_irq(&p->sighand->siglock);
- }
- }
- read_unlock(&tasklist_lock);
- return error;
+ return do_tkill(tgid, pid, sig);
}
/*
@@ -2335,38 +2318,11 @@
asmlinkage long
sys_tkill(int pid, int sig)
{
- struct siginfo info;
- int error;
- struct task_struct *p;
-
/* This is only valid for single tasks */
if (pid <= 0)
return -EINVAL;
- info.si_signo = sig;
- info.si_errno = 0;
- info.si_code = SI_TKILL;
- info.si_pid = current->tgid;
- info.si_uid = current->uid;
-
- read_lock(&tasklist_lock);
- p = find_task_by_pid(pid);
- error = -ESRCH;
- if (p) {
- error = check_kill_permission(sig, &info, p);
- /*
- * The null signal is a permissions and process existence
- * probe. No signal is actually delivered.
- */
- if (!error && sig && p->sighand) {
- spin_lock_irq(&p->sighand->siglock);
- handle_stop_signal(sig, p);
- error = specific_send_sig_info(sig, &info, p);
- spin_unlock_irq(&p->sighand->siglock);
- }
- }
- read_unlock(&tasklist_lock);
- return error;
+ return do_tkill(0, pid, sig);
}
asmlinkage long
diff --git a/kernel/time.c b/kernel/time.c
index 40c2410..245d595 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -338,30 +338,20 @@
if (mtemp >= MINSEC) {
ltemp = (time_offset / mtemp) << (SHIFT_USEC -
SHIFT_UPDATE);
- if (ltemp < 0)
- time_freq -= -ltemp >> SHIFT_KH;
- else
- time_freq += ltemp >> SHIFT_KH;
+ time_freq += shift_right(ltemp, SHIFT_KH);
} else /* calibration interval too short (p. 12) */
result = TIME_ERROR;
} else { /* PLL mode */
if (mtemp < MAXSEC) {
ltemp *= mtemp;
- if (ltemp < 0)
- time_freq -= -ltemp >> (time_constant +
- time_constant +
- SHIFT_KF - SHIFT_USEC);
- else
- time_freq += ltemp >> (time_constant +
+ time_freq += shift_right(ltemp,(time_constant +
time_constant +
- SHIFT_KF - SHIFT_USEC);
+ SHIFT_KF - SHIFT_USEC));
} else /* calibration interval too long (p. 12) */
result = TIME_ERROR;
}
- if (time_freq > time_tolerance)
- time_freq = time_tolerance;
- else if (time_freq < -time_tolerance)
- time_freq = -time_tolerance;
+ time_freq = min(time_freq, time_tolerance);
+ time_freq = max(time_freq, -time_tolerance);
} /* STA_PLL || STA_PPSTIME */
} /* txc->modes & ADJ_OFFSET */
if (txc->modes & ADJ_TICK) {
@@ -384,10 +374,7 @@
if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
txc->offset = save_adjust;
else {
- if (time_offset < 0)
- txc->offset = -(-time_offset >> SHIFT_UPDATE);
- else
- txc->offset = time_offset >> SHIFT_UPDATE;
+ txc->offset = shift_right(time_offset, SHIFT_UPDATE);
}
txc->freq = time_freq + pps_freq;
txc->maxerror = time_maxerror;
@@ -532,6 +519,7 @@
clock_was_set();
return 0;
}
+EXPORT_SYMBOL(do_settimeofday);
void do_gettimeofday (struct timeval *tv)
{
diff --git a/kernel/timer.c b/kernel/timer.c
index 3ba10fa..fd74268 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -46,6 +46,10 @@
#define time_interpolator_update(x)
#endif
+u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
/*
* per-CPU timer vector definitions:
*/
@@ -91,30 +95,6 @@
#endif
}
-static void check_timer_failed(struct timer_list *timer)
-{
- static int whine_count;
- if (whine_count < 16) {
- whine_count++;
- printk("Uninitialised timer!\n");
- printk("This is just a warning. Your computer is OK\n");
- printk("function=0x%p, data=0x%lx\n",
- timer->function, timer->data);
- dump_stack();
- }
- /*
- * Now fix it up
- */
- timer->magic = TIMER_MAGIC;
-}
-
-static inline void check_timer(struct timer_list *timer)
-{
- if (timer->magic != TIMER_MAGIC)
- check_timer_failed(timer);
-}
-
-
static void internal_add_timer(tvec_base_t *base, struct timer_list *timer)
{
unsigned long expires = timer->expires;
@@ -177,7 +157,6 @@
{
timer->entry.next = NULL;
timer->base = &per_cpu(tvec_bases, raw_smp_processor_id()).t_base;
- timer->magic = TIMER_MAGIC;
}
EXPORT_SYMBOL(init_timer);
@@ -230,7 +209,6 @@
int ret = 0;
BUG_ON(!timer->function);
- check_timer(timer);
base = lock_timer_base(timer, &flags);
@@ -283,9 +261,6 @@
unsigned long flags;
BUG_ON(timer_pending(timer) || !timer->function);
-
- check_timer(timer);
-
spin_lock_irqsave(&base->t_base.lock, flags);
timer->base = &base->t_base;
internal_add_timer(base, timer);
@@ -316,8 +291,6 @@
{
BUG_ON(!timer->function);
- check_timer(timer);
-
/*
* This is a common optimization triggered by the
* networking code - if the timer is re-modified
@@ -348,8 +321,6 @@
unsigned long flags;
int ret = 0;
- check_timer(timer);
-
if (timer_pending(timer)) {
base = lock_timer_base(timer, &flags);
if (timer_pending(timer)) {
@@ -412,8 +383,6 @@
*/
int del_timer_sync(struct timer_list *timer)
{
- check_timer(timer);
-
for (;;) {
int ret = try_to_del_timer_sync(timer);
if (ret >= 0)
@@ -632,134 +601,118 @@
*/
static void second_overflow(void)
{
- long ltemp;
+ long ltemp;
- /* Bump the maxerror field */
- time_maxerror += time_tolerance >> SHIFT_USEC;
- if ( time_maxerror > NTP_PHASE_LIMIT ) {
- time_maxerror = NTP_PHASE_LIMIT;
- time_status |= STA_UNSYNC;
- }
-
- /*
- * Leap second processing. If in leap-insert state at
- * the end of the day, the system clock is set back one
- * second; if in leap-delete state, the system clock is
- * set ahead one second. The microtime() routine or
- * external clock driver will insure that reported time
- * is always monotonic. The ugly divides should be
- * replaced.
- */
- switch (time_state) {
-
- case TIME_OK:
- if (time_status & STA_INS)
- time_state = TIME_INS;
- else if (time_status & STA_DEL)
- time_state = TIME_DEL;
- break;
-
- case TIME_INS:
- if (xtime.tv_sec % 86400 == 0) {
- xtime.tv_sec--;
- wall_to_monotonic.tv_sec++;
- /* The timer interpolator will make time change gradually instead
- * of an immediate jump by one second.
- */
- time_interpolator_update(-NSEC_PER_SEC);
- time_state = TIME_OOP;
- clock_was_set();
- printk(KERN_NOTICE "Clock: inserting leap second 23:59:60 UTC\n");
+ /* Bump the maxerror field */
+ time_maxerror += time_tolerance >> SHIFT_USEC;
+ if (time_maxerror > NTP_PHASE_LIMIT) {
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_status |= STA_UNSYNC;
}
- break;
- case TIME_DEL:
- if ((xtime.tv_sec + 1) % 86400 == 0) {
- xtime.tv_sec++;
- wall_to_monotonic.tv_sec--;
- /* Use of time interpolator for a gradual change of time */
- time_interpolator_update(NSEC_PER_SEC);
- time_state = TIME_WAIT;
- clock_was_set();
- printk(KERN_NOTICE "Clock: deleting leap second 23:59:59 UTC\n");
+ /*
+ * Leap second processing. If in leap-insert state at the end of the
+ * day, the system clock is set back one second; if in leap-delete
+ * state, the system clock is set ahead one second. The microtime()
+ * routine or external clock driver will insure that reported time is
+ * always monotonic. The ugly divides should be replaced.
+ */
+ switch (time_state) {
+ case TIME_OK:
+ if (time_status & STA_INS)
+ time_state = TIME_INS;
+ else if (time_status & STA_DEL)
+ time_state = TIME_DEL;
+ break;
+ case TIME_INS:
+ if (xtime.tv_sec % 86400 == 0) {
+ xtime.tv_sec--;
+ wall_to_monotonic.tv_sec++;
+ /*
+ * The timer interpolator will make time change
+ * gradually instead of an immediate jump by one second
+ */
+ time_interpolator_update(-NSEC_PER_SEC);
+ time_state = TIME_OOP;
+ clock_was_set();
+ printk(KERN_NOTICE "Clock: inserting leap second "
+ "23:59:60 UTC\n");
+ }
+ break;
+ case TIME_DEL:
+ if ((xtime.tv_sec + 1) % 86400 == 0) {
+ xtime.tv_sec++;
+ wall_to_monotonic.tv_sec--;
+ /*
+ * Use of time interpolator for a gradual change of
+ * time
+ */
+ time_interpolator_update(NSEC_PER_SEC);
+ time_state = TIME_WAIT;
+ clock_was_set();
+ printk(KERN_NOTICE "Clock: deleting leap second "
+ "23:59:59 UTC\n");
+ }
+ break;
+ case TIME_OOP:
+ time_state = TIME_WAIT;
+ break;
+ case TIME_WAIT:
+ if (!(time_status & (STA_INS | STA_DEL)))
+ time_state = TIME_OK;
}
- break;
- case TIME_OOP:
- time_state = TIME_WAIT;
- break;
-
- case TIME_WAIT:
- if (!(time_status & (STA_INS | STA_DEL)))
- time_state = TIME_OK;
- }
-
- /*
- * Compute the phase adjustment for the next second. In
- * PLL mode, the offset is reduced by a fixed factor
- * times the time constant. In FLL mode the offset is
- * used directly. In either mode, the maximum phase
- * adjustment for each second is clamped so as to spread
- * the adjustment over not more than the number of
- * seconds between updates.
- */
- if (time_offset < 0) {
- ltemp = -time_offset;
- if (!(time_status & STA_FLL))
- ltemp >>= SHIFT_KG + time_constant;
- if (ltemp > (MAXPHASE / MINSEC) << SHIFT_UPDATE)
- ltemp = (MAXPHASE / MINSEC) << SHIFT_UPDATE;
- time_offset += ltemp;
- time_adj = -ltemp << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE);
- } else {
+ /*
+ * Compute the phase adjustment for the next second. In PLL mode, the
+ * offset is reduced by a fixed factor times the time constant. In FLL
+ * mode the offset is used directly. In either mode, the maximum phase
+ * adjustment for each second is clamped so as to spread the adjustment
+ * over not more than the number of seconds between updates.
+ */
ltemp = time_offset;
if (!(time_status & STA_FLL))
- ltemp >>= SHIFT_KG + time_constant;
- if (ltemp > (MAXPHASE / MINSEC) << SHIFT_UPDATE)
- ltemp = (MAXPHASE / MINSEC) << SHIFT_UPDATE;
+ ltemp = shift_right(ltemp, SHIFT_KG + time_constant);
+ ltemp = min(ltemp, (MAXPHASE / MINSEC) << SHIFT_UPDATE);
+ ltemp = max(ltemp, -(MAXPHASE / MINSEC) << SHIFT_UPDATE);
time_offset -= ltemp;
time_adj = ltemp << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE);
- }
- /*
- * Compute the frequency estimate and additional phase
- * adjustment due to frequency error for the next
- * second. When the PPS signal is engaged, gnaw on the
- * watchdog counter and update the frequency computed by
- * the pll and the PPS signal.
- */
- pps_valid++;
- if (pps_valid == PPS_VALID) { /* PPS signal lost */
- pps_jitter = MAXTIME;
- pps_stabil = MAXFREQ;
- time_status &= ~(STA_PPSSIGNAL | STA_PPSJITTER |
- STA_PPSWANDER | STA_PPSERROR);
- }
- ltemp = time_freq + pps_freq;
- if (ltemp < 0)
- time_adj -= -ltemp >>
- (SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE);
- else
- time_adj += ltemp >>
- (SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE);
+ /*
+ * Compute the frequency estimate and additional phase adjustment due
+ * to frequency error for the next second. When the PPS signal is
+ * engaged, gnaw on the watchdog counter and update the frequency
+ * computed by the pll and the PPS signal.
+ */
+ pps_valid++;
+ if (pps_valid == PPS_VALID) { /* PPS signal lost */
+ pps_jitter = MAXTIME;
+ pps_stabil = MAXFREQ;
+ time_status &= ~(STA_PPSSIGNAL | STA_PPSJITTER |
+ STA_PPSWANDER | STA_PPSERROR);
+ }
+ ltemp = time_freq + pps_freq;
+ time_adj += shift_right(ltemp,(SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE));
#if HZ == 100
- /* Compensate for (HZ==100) != (1 << SHIFT_HZ).
- * Add 25% and 3.125% to get 128.125; => only 0.125% error (p. 14)
- */
- if (time_adj < 0)
- time_adj -= (-time_adj >> 2) + (-time_adj >> 5);
- else
- time_adj += (time_adj >> 2) + (time_adj >> 5);
+ /*
+ * Compensate for (HZ==100) != (1 << SHIFT_HZ). Add 25% and 3.125% to
+ * get 128.125; => only 0.125% error (p. 14)
+ */
+ time_adj += shift_right(time_adj, 2) + shift_right(time_adj, 5);
+#endif
+#if HZ == 250
+ /*
+ * Compensate for (HZ==250) != (1 << SHIFT_HZ). Add 1.5625% and
+ * 0.78125% to get 255.85938; => only 0.05% error (p. 14)
+ */
+ time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7);
#endif
#if HZ == 1000
- /* Compensate for (HZ==1000) != (1 << SHIFT_HZ).
- * Add 1.5625% and 0.78125% to get 1023.4375; => only 0.05% error (p. 14)
- */
- if (time_adj < 0)
- time_adj -= (-time_adj >> 6) + (-time_adj >> 7);
- else
- time_adj += (time_adj >> 6) + (time_adj >> 7);
+ /*
+ * Compensate for (HZ==1000) != (1 << SHIFT_HZ). Add 1.5625% and
+ * 0.78125% to get 1023.4375; => only 0.05% error (p. 14)
+ */
+ time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7);
#endif
}
@@ -768,23 +721,20 @@
{
long time_adjust_step, delta_nsec;
- if ( (time_adjust_step = time_adjust) != 0 ) {
- /* We are doing an adjtime thing.
- *
- * Prepare time_adjust_step to be within bounds.
- * Note that a positive time_adjust means we want the clock
- * to run faster.
- *
- * Limit the amount of the step to be in the range
- * -tickadj .. +tickadj
- */
- if (time_adjust > tickadj)
- time_adjust_step = tickadj;
- else if (time_adjust < -tickadj)
- time_adjust_step = -tickadj;
+ if ((time_adjust_step = time_adjust) != 0 ) {
+ /*
+ * We are doing an adjtime thing. Prepare time_adjust_step to
+ * be within bounds. Note that a positive time_adjust means we
+ * want the clock to run faster.
+ *
+ * Limit the amount of the step to be in the range
+ * -tickadj .. +tickadj
+ */
+ time_adjust_step = min(time_adjust_step, (long)tickadj);
+ time_adjust_step = max(time_adjust_step, (long)-tickadj);
- /* Reduce by this step the amount of time left */
- time_adjust -= time_adjust_step;
+ /* Reduce by this step the amount of time left */
+ time_adjust -= time_adjust_step;
}
delta_nsec = tick_nsec + time_adjust_step * 1000;
/*
@@ -792,13 +742,8 @@
* advance the tick more.
*/
time_phase += time_adj;
- if (time_phase <= -FINENSEC) {
- long ltemp = -time_phase >> (SHIFT_SCALE - 10);
- time_phase += ltemp << (SHIFT_SCALE - 10);
- delta_nsec -= ltemp;
- }
- else if (time_phase >= FINENSEC) {
- long ltemp = time_phase >> (SHIFT_SCALE - 10);
+ if ((time_phase >= FINENSEC) || (time_phase <= -FINENSEC)) {
+ long ltemp = shift_right(time_phase, (SHIFT_SCALE - 10));
time_phase -= ltemp << (SHIFT_SCALE - 10);
delta_nsec += ltemp;
}
@@ -1128,8 +1073,8 @@
if (timeout < 0)
{
printk(KERN_ERR "schedule_timeout: wrong timeout "
- "value %lx from %p\n", timeout,
- __builtin_return_address(0));
+ "value %lx from %p\n", timeout,
+ __builtin_return_address(0));
current->state = TASK_RUNNING;
goto out;
}
@@ -1137,12 +1082,8 @@
expire = timeout + jiffies;
- init_timer(&timer);
- timer.expires = expire;
- timer.data = (unsigned long) current;
- timer.function = process_timeout;
-
- add_timer(&timer);
+ setup_timer(&timer, process_timeout, (unsigned long)current);
+ __mod_timer(&timer, expire);
schedule();
del_singleshot_timer_sync(&timer);
@@ -1159,15 +1100,15 @@
*/
signed long __sched schedule_timeout_interruptible(signed long timeout)
{
- __set_current_state(TASK_INTERRUPTIBLE);
- return schedule_timeout(timeout);
+ __set_current_state(TASK_INTERRUPTIBLE);
+ return schedule_timeout(timeout);
}
EXPORT_SYMBOL(schedule_timeout_interruptible);
signed long __sched schedule_timeout_uninterruptible(signed long timeout)
{
- __set_current_state(TASK_UNINTERRUPTIBLE);
- return schedule_timeout(timeout);
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ return schedule_timeout(timeout);
}
EXPORT_SYMBOL(schedule_timeout_uninterruptible);
@@ -1507,16 +1448,18 @@
if (!time_interpolator)
return;
- /* The interpolator compensates for late ticks by accumulating
- * the late time in time_interpolator->offset. A tick earlier than
- * expected will lead to a reset of the offset and a corresponding
- * jump of the clock forward. Again this only works if the
- * interpolator clock is running slightly slower than the regular clock
- * and the tuning logic insures that.
- */
+ /*
+ * The interpolator compensates for late ticks by accumulating the late
+ * time in time_interpolator->offset. A tick earlier than expected will
+ * lead to a reset of the offset and a corresponding jump of the clock
+ * forward. Again this only works if the interpolator clock is running
+ * slightly slower than the regular clock and the tuning logic insures
+ * that.
+ */
counter = time_interpolator_get_counter(1);
- offset = time_interpolator->offset + GET_TI_NSECS(counter, time_interpolator);
+ offset = time_interpolator->offset +
+ GET_TI_NSECS(counter, time_interpolator);
if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
time_interpolator->offset = offset - delta_nsec;
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 91bacb1..7cee222 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -12,6 +12,8 @@
* Andrew Morton <andrewm@uow.edu.au>
* Kai Petzke <wpp@marie.physik.tu-berlin.de>
* Theodore Ts'o <tytso@mit.edu>
+ *
+ * Made to use alloc_percpu by Christoph Lameter <clameter@sgi.com>.
*/
#include <linux/module.h>
@@ -57,7 +59,7 @@
* per-CPU workqueues:
*/
struct workqueue_struct {
- struct cpu_workqueue_struct cpu_wq[NR_CPUS];
+ struct cpu_workqueue_struct *cpu_wq;
const char *name;
struct list_head list; /* Empty if single thread */
};
@@ -102,7 +104,7 @@
if (unlikely(is_single_threaded(wq)))
cpu = 0;
BUG_ON(!list_empty(&work->entry));
- __queue_work(wq->cpu_wq + cpu, work);
+ __queue_work(per_cpu_ptr(wq->cpu_wq, cpu), work);
ret = 1;
}
put_cpu();
@@ -118,7 +120,7 @@
if (unlikely(is_single_threaded(wq)))
cpu = 0;
- __queue_work(wq->cpu_wq + cpu, work);
+ __queue_work(per_cpu_ptr(wq->cpu_wq, cpu), work);
}
int fastcall queue_delayed_work(struct workqueue_struct *wq,
@@ -265,13 +267,13 @@
if (is_single_threaded(wq)) {
/* Always use cpu 0's area. */
- flush_cpu_workqueue(wq->cpu_wq + 0);
+ flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, 0));
} else {
int cpu;
lock_cpu_hotplug();
for_each_online_cpu(cpu)
- flush_cpu_workqueue(wq->cpu_wq + cpu);
+ flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, cpu));
unlock_cpu_hotplug();
}
}
@@ -279,7 +281,7 @@
static struct task_struct *create_workqueue_thread(struct workqueue_struct *wq,
int cpu)
{
- struct cpu_workqueue_struct *cwq = wq->cpu_wq + cpu;
+ struct cpu_workqueue_struct *cwq = per_cpu_ptr(wq->cpu_wq, cpu);
struct task_struct *p;
spin_lock_init(&cwq->lock);
@@ -312,6 +314,7 @@
if (!wq)
return NULL;
+ wq->cpu_wq = alloc_percpu(struct cpu_workqueue_struct);
wq->name = name;
/* We don't need the distraction of CPUs appearing and vanishing. */
lock_cpu_hotplug();
@@ -353,7 +356,7 @@
unsigned long flags;
struct task_struct *p;
- cwq = wq->cpu_wq + cpu;
+ cwq = per_cpu_ptr(wq->cpu_wq, cpu);
spin_lock_irqsave(&cwq->lock, flags);
p = cwq->thread;
cwq->thread = NULL;
@@ -380,6 +383,7 @@
spin_unlock(&workqueue_lock);
}
unlock_cpu_hotplug();
+ free_percpu(wq->cpu_wq);
kfree(wq);
}
@@ -458,7 +462,7 @@
BUG_ON(!keventd_wq);
- cwq = keventd_wq->cpu_wq + cpu;
+ cwq = per_cpu_ptr(keventd_wq->cpu_wq, cpu);
if (current == cwq->thread)
ret = 1;
@@ -470,7 +474,7 @@
/* Take the work from this (downed) CPU. */
static void take_over_work(struct workqueue_struct *wq, unsigned int cpu)
{
- struct cpu_workqueue_struct *cwq = wq->cpu_wq + cpu;
+ struct cpu_workqueue_struct *cwq = per_cpu_ptr(wq->cpu_wq, cpu);
LIST_HEAD(list);
struct work_struct *work;
@@ -481,7 +485,7 @@
printk("Taking work for %s\n", wq->name);
work = list_entry(list.next,struct work_struct,entry);
list_del(&work->entry);
- __queue_work(wq->cpu_wq + smp_processor_id(), work);
+ __queue_work(per_cpu_ptr(wq->cpu_wq, smp_processor_id()), work);
}
spin_unlock_irq(&cwq->lock);
}
@@ -508,15 +512,18 @@
case CPU_ONLINE:
/* Kick off worker threads. */
list_for_each_entry(wq, &workqueues, list) {
- kthread_bind(wq->cpu_wq[hotcpu].thread, hotcpu);
- wake_up_process(wq->cpu_wq[hotcpu].thread);
+ struct cpu_workqueue_struct *cwq;
+
+ cwq = per_cpu_ptr(wq->cpu_wq, hotcpu);
+ kthread_bind(cwq->thread, hotcpu);
+ wake_up_process(cwq->thread);
}
break;
case CPU_UP_CANCELED:
list_for_each_entry(wq, &workqueues, list) {
/* Unbind so it can run. */
- kthread_bind(wq->cpu_wq[hotcpu].thread,
+ kthread_bind(per_cpu_ptr(wq->cpu_wq, hotcpu)->thread,
smp_processor_id());
cleanup_workqueue_thread(wq, hotcpu);
}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 016e89a..156822e 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -128,7 +128,7 @@
config DEBUG_BUGVERBOSE
bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
depends on BUG
- depends on ARM || ARM26 || M32R || M68K || SPARC32 || SPARC64 || (X86 && !X86_64) || FRV
+ depends on ARM || ARM26 || M32R || M68K || SPARC32 || SPARC64 || X86_32 || FRV
default !EMBEDDED
help
Say Y here to make BUG() panics output the file name and line number
@@ -168,13 +168,34 @@
If unsure, say N.
+config DEBUG_VM
+ bool "Debug VM"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to debug the virtual-memory system.
+
+ If unsure, say N.
+
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
- and slower, but it might give very useful debugging information
- on some architectures or you use external debuggers.
+ and slower, but it might give very useful debugging information on
+ some architectures or if you use external debuggers.
If you don't debug the kernel, you can say N.
+config RCU_TORTURE_TEST
+ tristate "torture tests for RCU"
+ depends on DEBUG_KERNEL
+ default n
+ help
+ This option provides a kernel module that runs torture tests
+ on the RCU infrastructure. The kernel module may be built
+ after the fact on the running kernel to be tested, if desired.
+
+ Say Y here if you want RCU torture tests to start automatically
+ at boot time (you probably don't).
+ Say M if you want the RCU torture tests to build as a module.
+ Say N if you are unsure.
diff --git a/lib/bitmap.c b/lib/bitmap.c
index fb9371f..23d3b11 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -511,6 +511,172 @@
}
EXPORT_SYMBOL(bitmap_parselist);
+/*
+ * bitmap_pos_to_ord(buf, pos, bits)
+ * @buf: pointer to a bitmap
+ * @pos: a bit position in @buf (0 <= @pos < @bits)
+ * @bits: number of valid bit positions in @buf
+ *
+ * Map the bit at position @pos in @buf (of length @bits) to the
+ * ordinal of which set bit it is. If it is not set or if @pos
+ * is not a valid bit position, map to zero (0).
+ *
+ * If for example, just bits 4 through 7 are set in @buf, then @pos
+ * values 4 through 7 will get mapped to 0 through 3, respectively,
+ * and other @pos values will get mapped to 0. When @pos value 7
+ * gets mapped to (returns) @ord value 3 in this example, that means
+ * that bit 7 is the 3rd (starting with 0th) set bit in @buf.
+ *
+ * The bit positions 0 through @bits are valid positions in @buf.
+ */
+static int bitmap_pos_to_ord(const unsigned long *buf, int pos, int bits)
+{
+ int ord = 0;
+
+ if (pos >= 0 && pos < bits) {
+ int i;
+
+ for (i = find_first_bit(buf, bits);
+ i < pos;
+ i = find_next_bit(buf, bits, i + 1))
+ ord++;
+ if (i > pos)
+ ord = 0;
+ }
+ return ord;
+}
+
+/**
+ * bitmap_ord_to_pos(buf, ord, bits)
+ * @buf: pointer to bitmap
+ * @ord: ordinal bit position (n-th set bit, n >= 0)
+ * @bits: number of valid bit positions in @buf
+ *
+ * Map the ordinal offset of bit @ord in @buf to its position in @buf.
+ * If @ord is not the ordinal offset of a set bit in @buf, map to zero (0).
+ *
+ * If for example, just bits 4 through 7 are set in @buf, then @ord
+ * values 0 through 3 will get mapped to 4 through 7, respectively,
+ * and all other @ord valuds will get mapped to 0. When @ord value 3
+ * gets mapped to (returns) @pos value 7 in this example, that means
+ * that the 3rd set bit (starting with 0th) is at position 7 in @buf.
+ *
+ * The bit positions 0 through @bits are valid positions in @buf.
+ */
+static int bitmap_ord_to_pos(const unsigned long *buf, int ord, int bits)
+{
+ int pos = 0;
+
+ if (ord >= 0 && ord < bits) {
+ int i;
+
+ for (i = find_first_bit(buf, bits);
+ i < bits && ord > 0;
+ i = find_next_bit(buf, bits, i + 1))
+ ord--;
+ if (i < bits && ord == 0)
+ pos = i;
+ }
+
+ return pos;
+}
+
+/**
+ * bitmap_remap - Apply map defined by a pair of bitmaps to another bitmap
+ * @src: subset to be remapped
+ * @dst: remapped result
+ * @old: defines domain of map
+ * @new: defines range of map
+ * @bits: number of bits in each of these bitmaps
+ *
+ * Let @old and @new define a mapping of bit positions, such that
+ * whatever position is held by the n-th set bit in @old is mapped
+ * to the n-th set bit in @new. In the more general case, allowing
+ * for the possibility that the weight 'w' of @new is less than the
+ * weight of @old, map the position of the n-th set bit in @old to
+ * the position of the m-th set bit in @new, where m == n % w.
+ *
+ * If either of the @old and @new bitmaps are empty, or if@src and @dst
+ * point to the same location, then this routine does nothing.
+ *
+ * The positions of unset bits in @old are mapped to the position of
+ * the first set bit in @new.
+ *
+ * Apply the above specified mapping to @src, placing the result in
+ * @dst, clearing any bits previously set in @dst.
+ *
+ * The resulting value of @dst will have either the same weight as
+ * @src, or less weight in the general case that the mapping wasn't
+ * injective due to the weight of @new being less than that of @old.
+ * The resulting value of @dst will never have greater weight than
+ * that of @src, except perhaps in the case that one of the above
+ * conditions was not met and this routine just returned.
+ *
+ * For example, lets say that @old has bits 4 through 7 set, and
+ * @new has bits 12 through 15 set. This defines the mapping of bit
+ * position 4 to 12, 5 to 13, 6 to 14 and 7 to 15, and of all other
+ * bit positions to 12 (the first set bit in @new. So if say @src
+ * comes into this routine with bits 1, 5 and 7 set, then @dst should
+ * leave with bits 12, 13 and 15 set.
+ */
+void bitmap_remap(unsigned long *dst, const unsigned long *src,
+ const unsigned long *old, const unsigned long *new,
+ int bits)
+{
+ int s;
+
+ if (bitmap_weight(old, bits) == 0)
+ return;
+ if (bitmap_weight(new, bits) == 0)
+ return;
+ if (dst == src) /* following doesn't handle inplace remaps */
+ return;
+
+ bitmap_zero(dst, bits);
+ for (s = find_first_bit(src, bits);
+ s < bits;
+ s = find_next_bit(src, bits, s + 1)) {
+ int x = bitmap_pos_to_ord(old, s, bits);
+ int y = bitmap_ord_to_pos(new, x, bits);
+ set_bit(y, dst);
+ }
+}
+EXPORT_SYMBOL(bitmap_remap);
+
+/**
+ * bitmap_bitremap - Apply map defined by a pair of bitmaps to a single bit
+ * @oldbit - bit position to be mapped
+ * @old: defines domain of map
+ * @new: defines range of map
+ * @bits: number of bits in each of these bitmaps
+ *
+ * Let @old and @new define a mapping of bit positions, such that
+ * whatever position is held by the n-th set bit in @old is mapped
+ * to the n-th set bit in @new. In the more general case, allowing
+ * for the possibility that the weight 'w' of @new is less than the
+ * weight of @old, map the position of the n-th set bit in @old to
+ * the position of the m-th set bit in @new, where m == n % w.
+ *
+ * The positions of unset bits in @old are mapped to the position of
+ * the first set bit in @new.
+ *
+ * Apply the above specified mapping to bit position @oldbit, returning
+ * the new bit position.
+ *
+ * For example, lets say that @old has bits 4 through 7 set, and
+ * @new has bits 12 through 15 set. This defines the mapping of bit
+ * position 4 to 12, 5 to 13, 6 to 14 and 7 to 15, and of all other
+ * bit positions to 12 (the first set bit in @new. So if say @oldbit
+ * is 5, then this routine returns 13.
+ */
+int bitmap_bitremap(int oldbit, const unsigned long *old,
+ const unsigned long *new, int bits)
+{
+ int x = bitmap_pos_to_ord(old, oldbit, bits);
+ return bitmap_ord_to_pos(new, x, bits);
+}
+EXPORT_SYMBOL(bitmap_bitremap);
+
/**
* bitmap_find_free_region - find a contiguous aligned mem region
* @bitmap: an array of unsigned longs corresponding to the bitmap
diff --git a/lib/extable.c b/lib/extable.c
index 3f677a8..18df57c 100644
--- a/lib/extable.c
+++ b/lib/extable.c
@@ -16,9 +16,6 @@
#include <linux/sort.h>
#include <asm/uaccess.h>
-extern struct exception_table_entry __start___ex_table[];
-extern struct exception_table_entry __stop___ex_table[];
-
#ifndef ARCH_HAS_SORT_EXTABLE
/*
* The exception table needs to be sorted so that the binary
diff --git a/lib/idr.c b/lib/idr.c
index d4df21d..d226259 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -6,20 +6,20 @@
* Modified by George Anzinger to reuse immediately and to use
* find bit instructions. Also removed _irq on spinlocks.
*
- * Small id to pointer translation service.
+ * Small id to pointer translation service.
*
- * It uses a radix tree like structure as a sparse array indexed
+ * It uses a radix tree like structure as a sparse array indexed
* by the id to obtain the pointer. The bitmap makes allocating
- * a new id quick.
+ * a new id quick.
*
* You call it to allocate an id (an int) an associate with that id a
* pointer or what ever, we treat it as a (void *). You can pass this
* id to a user for him to pass back at a later time. You then pass
* that id to this code and it returns your pointer.
- * You can release ids at any time. When all ids are released, most of
+ * You can release ids at any time. When all ids are released, most of
* the memory is returned (we keep IDR_FREE_MAX) in a local pool so we
- * don't need to go to the memory "store" during an id allocate, just
+ * don't need to go to the memory "store" during an id allocate, just
* so you don't need to be too concerned about locking and conflicts
* with the slab allocator.
*/
@@ -72,12 +72,12 @@
* If the system is REALLY out of memory this function returns 0,
* otherwise 1.
*/
-int idr_pre_get(struct idr *idp, unsigned gfp_mask)
+int idr_pre_get(struct idr *idp, gfp_t gfp_mask)
{
while (idp->id_free_cnt < IDR_FREE_MAX) {
struct idr_layer *new;
new = kmem_cache_alloc(idr_layer_cache, gfp_mask);
- if(new == NULL)
+ if (new == NULL)
return (0);
free_layer(idp, new);
}
@@ -107,7 +107,7 @@
if (m == IDR_SIZE) {
/* no space available go back to previous layer. */
l++;
- id = (id | ((1 << (IDR_BITS*l))-1)) + 1;
+ id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1;
if (!(p = pa[l])) {
*starting_id = id;
return -2;
@@ -161,7 +161,7 @@
{
struct idr_layer *p, *new;
int layers, v, id;
-
+
id = starting_id;
build_up:
p = idp->top;
@@ -225,6 +225,7 @@
int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
{
int rv;
+
rv = idr_get_new_above_int(idp, ptr, starting_id);
/*
* This is a cheap hack until the IDR code can be fixed to
@@ -259,6 +260,7 @@
int idr_get_new(struct idr *idp, void *ptr, int *id)
{
int rv;
+
rv = idr_get_new_above_int(idp, ptr, 0);
/*
* This is a cheap hack until the IDR code can be fixed to
@@ -306,11 +308,10 @@
free_layer(idp, **paa);
**paa-- = NULL;
}
- if ( ! *paa )
+ if (!*paa)
idp->layers = 0;
- } else {
+ } else
idr_remove_warning(id);
- }
}
/**
@@ -326,9 +327,8 @@
id &= MAX_ID_MASK;
sub_remove(idp, (idp->layers - 1) * IDR_BITS, id);
- if ( idp->top && idp->top->count == 1 &&
- (idp->layers > 1) &&
- idp->top->ary[0]){ // We can drop a layer
+ if (idp->top && idp->top->count == 1 && (idp->layers > 1) &&
+ idp->top->ary[0]) { // We can drop a layer
p = idp->top->ary[0];
idp->top->bitmap = idp->top->count = 0;
@@ -337,7 +337,6 @@
--idp->layers;
}
while (idp->id_free_cnt >= IDR_FREE_MAX) {
-
p = alloc_layer(idp);
kmem_cache_free(idr_layer_cache, p);
return;
@@ -391,8 +390,8 @@
}
EXPORT_SYMBOL(idr_find);
-static void idr_cache_ctor(void * idr_layer,
- kmem_cache_t *idr_layer_cache, unsigned long flags)
+static void idr_cache_ctor(void * idr_layer, kmem_cache_t *idr_layer_cache,
+ unsigned long flags)
{
memset(idr_layer, 0, sizeof(struct idr_layer));
}
@@ -400,7 +399,7 @@
static int init_id_cache(void)
{
if (!idr_layer_cache)
- idr_layer_cache = kmem_cache_create("idr_layer_cache",
+ idr_layer_cache = kmem_cache_create("idr_layer_cache",
sizeof(struct idr_layer), 0, 0, idr_cache_ctor, NULL);
return 0;
}
diff --git a/lib/kobject.c b/lib/kobject.c
index dd0917d..a181abe 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -14,6 +14,7 @@
#include <linux/string.h>
#include <linux/module.h>
#include <linux/stat.h>
+#include <linux/slab.h>
/**
* populate_dir - populate directory with attributes.
@@ -100,7 +101,7 @@
* @kobj: kobject in question, with which to build the path
* @gfp_mask: the allocation type used to allocate the path
*/
-char *kobject_get_path(struct kobject *kobj, int gfp_mask)
+char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask)
{
char *path;
int len;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 04ca442..3ab3754 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -54,7 +54,7 @@
static struct sock *uevent_sock;
/**
- * send_uevent - notify userspace by sending event trough netlink socket
+ * send_uevent - notify userspace by sending event through netlink socket
*
* @signal: signal name
* @obj: object path (kobject)
@@ -62,7 +62,7 @@
* @gfp_mask:
*/
static int send_uevent(const char *signal, const char *obj,
- char **envp, int gfp_mask)
+ char **envp, gfp_t gfp_mask)
{
struct sk_buff *skb;
char *pos;
@@ -98,7 +98,7 @@
}
static int do_kobject_uevent(struct kobject *kobj, enum kobject_action action,
- struct attribute *attr, int gfp_mask)
+ struct attribute *attr, gfp_t gfp_mask)
{
char *path;
char *attrpath;
diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c
index 42c08ef..eddc9b3 100644
--- a/lib/smp_processor_id.c
+++ b/lib/smp_processor_id.c
@@ -5,6 +5,7 @@
*/
#include <linux/module.h>
#include <linux/kallsyms.h>
+#include <linux/sched.h>
unsigned int debug_smp_processor_id(void)
{
diff --git a/lib/sort.c b/lib/sort.c
index ddc4d35..5f3b51f 100644
--- a/lib/sort.c
+++ b/lib/sort.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sort.h>
+#include <linux/slab.h>
static void u32_swap(void *a, void *b, int size)
{
diff --git a/lib/string.c b/lib/string.c
index d886ef1..037a48a 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -36,11 +36,13 @@
/* Yes, Virginia, it had better be unsigned */
unsigned char c1, c2;
- c1 = 0; c2 = 0;
+ c1 = c2 = 0;
if (len) {
do {
- c1 = *s1; c2 = *s2;
- s1++; s2++;
+ c1 = *s1;
+ c2 = *s2;
+ s1++;
+ s2++;
if (!c1)
break;
if (!c2)
@@ -55,7 +57,6 @@
}
return (int)c1 - (int)c2;
}
-
EXPORT_SYMBOL(strnicmp);
#endif
@@ -66,7 +67,7 @@
* @src: Where to copy the string from
*/
#undef strcpy
-char * strcpy(char * dest,const char *src)
+char *strcpy(char *dest, const char *src)
{
char *tmp = dest;
@@ -91,12 +92,13 @@
* count, the remainder of @dest will be padded with %NUL.
*
*/
-char * strncpy(char * dest,const char *src,size_t count)
+char *strncpy(char *dest, const char *src, size_t count)
{
char *tmp = dest;
while (count) {
- if ((*tmp = *src) != 0) src++;
+ if ((*tmp = *src) != 0)
+ src++;
tmp++;
count--;
}
@@ -122,7 +124,7 @@
size_t ret = strlen(src);
if (size) {
- size_t len = (ret >= size) ? size-1 : ret;
+ size_t len = (ret >= size) ? size - 1 : ret;
memcpy(dest, src, len);
dest[len] = '\0';
}
@@ -138,7 +140,7 @@
* @src: The string to append to it
*/
#undef strcat
-char * strcat(char * dest, const char * src)
+char *strcat(char *dest, const char *src)
{
char *tmp = dest;
@@ -146,7 +148,6 @@
dest++;
while ((*dest++ = *src++) != '\0')
;
-
return tmp;
}
EXPORT_SYMBOL(strcat);
@@ -162,7 +163,7 @@
* Note that in contrast to strncpy, strncat ensures the result is
* terminated.
*/
-char * strncat(char *dest, const char *src, size_t count)
+char *strncat(char *dest, const char *src, size_t count)
{
char *tmp = dest;
@@ -176,7 +177,6 @@
}
}
}
-
return tmp;
}
EXPORT_SYMBOL(strncat);
@@ -216,15 +216,14 @@
* @ct: Another string
*/
#undef strcmp
-int strcmp(const char * cs,const char * ct)
+int strcmp(const char *cs, const char *ct)
{
- register signed char __res;
+ signed char __res;
while (1) {
if ((__res = *cs - *ct++) != 0 || !*cs++)
break;
}
-
return __res;
}
EXPORT_SYMBOL(strcmp);
@@ -237,16 +236,15 @@
* @ct: Another string
* @count: The maximum number of bytes to compare
*/
-int strncmp(const char * cs,const char * ct,size_t count)
+int strncmp(const char *cs, const char *ct, size_t count)
{
- register signed char __res = 0;
+ signed char __res = 0;
while (count) {
if ((__res = *cs - *ct++) != 0 || !*cs++)
break;
count--;
}
-
return __res;
}
EXPORT_SYMBOL(strncmp);
@@ -258,12 +256,12 @@
* @s: The string to be searched
* @c: The character to search for
*/
-char * strchr(const char * s, int c)
+char *strchr(const char *s, int c)
{
- for(; *s != (char) c; ++s)
+ for (; *s != (char)c; ++s)
if (*s == '\0')
return NULL;
- return (char *) s;
+ return (char *)s;
}
EXPORT_SYMBOL(strchr);
#endif
@@ -274,7 +272,7 @@
* @s: The string to be searched
* @c: The character to search for
*/
-char * strrchr(const char * s, int c)
+char *strrchr(const char *s, int c)
{
const char *p = s + strlen(s);
do {
@@ -296,8 +294,8 @@
char *strnchr(const char *s, size_t count, int c)
{
for (; count-- && *s != '\0'; ++s)
- if (*s == (char) c)
- return (char *) s;
+ if (*s == (char)c)
+ return (char *)s;
return NULL;
}
EXPORT_SYMBOL(strnchr);
@@ -308,7 +306,7 @@
* strlen - Find the length of a string
* @s: The string to be sized
*/
-size_t strlen(const char * s)
+size_t strlen(const char *s)
{
const char *sc;
@@ -325,7 +323,7 @@
* @s: The string to be sized
* @count: The maximum number of bytes to search
*/
-size_t strnlen(const char * s, size_t count)
+size_t strnlen(const char *s, size_t count)
{
const char *sc;
@@ -358,7 +356,6 @@
return count;
++count;
}
-
return count;
}
@@ -384,9 +381,8 @@
}
++count;
}
-
return count;
-}
+}
EXPORT_SYMBOL(strcspn);
#ifndef __HAVE_ARCH_STRPBRK
@@ -395,14 +391,14 @@
* @cs: The string to be searched
* @ct: The characters to search for
*/
-char * strpbrk(const char * cs,const char * ct)
+char *strpbrk(const char *cs, const char *ct)
{
- const char *sc1,*sc2;
+ const char *sc1, *sc2;
- for( sc1 = cs; *sc1 != '\0'; ++sc1) {
- for( sc2 = ct; *sc2 != '\0'; ++sc2) {
+ for (sc1 = cs; *sc1 != '\0'; ++sc1) {
+ for (sc2 = ct; *sc2 != '\0'; ++sc2) {
if (*sc1 == *sc2)
- return (char *) sc1;
+ return (char *)sc1;
}
}
return NULL;
@@ -422,9 +418,10 @@
* of that name. In fact, it was stolen from glibc2 and de-fancy-fied.
* Same semantics, slimmer shape. ;)
*/
-char * strsep(char **s, const char *ct)
+char *strsep(char **s, const char *ct)
{
- char *sbegin = *s, *end;
+ char *sbegin = *s;
+ char *end;
if (sbegin == NULL)
return NULL;
@@ -433,10 +430,8 @@
if (end)
*end++ = '\0';
*s = end;
-
return sbegin;
}
-
EXPORT_SYMBOL(strsep);
#endif
@@ -449,13 +444,12 @@
*
* Do not use memset() to access IO space, use memset_io() instead.
*/
-void * memset(void * s,int c,size_t count)
+void *memset(void *s, int c, size_t count)
{
- char *xs = (char *) s;
+ char *xs = s;
while (count--)
*xs++ = c;
-
return s;
}
EXPORT_SYMBOL(memset);
@@ -471,13 +465,13 @@
* You should not use this function to access IO space, use memcpy_toio()
* or memcpy_fromio() instead.
*/
-void * memcpy(void * dest,const void *src,size_t count)
+void *memcpy(void *dest, const void *src, size_t count)
{
- char *tmp = (char *) dest, *s = (char *) src;
+ char *tmp = dest;
+ char *s = src;
while (count--)
*tmp++ = *s++;
-
return dest;
}
EXPORT_SYMBOL(memcpy);
@@ -492,23 +486,24 @@
*
* Unlike memcpy(), memmove() copes with overlapping areas.
*/
-void * memmove(void * dest,const void *src,size_t count)
+void *memmove(void *dest, const void *src, size_t count)
{
- char *tmp, *s;
+ char *tmp;
+ const char *s;
if (dest <= src) {
- tmp = (char *) dest;
- s = (char *) src;
+ tmp = dest;
+ s = src;
while (count--)
*tmp++ = *s++;
- }
- else {
- tmp = (char *) dest + count;
- s = (char *) src + count;
+ } else {
+ tmp = dest;
+ tmp += count;
+ s = src;
+ s += count;
while (count--)
*--tmp = *--s;
- }
-
+ }
return dest;
}
EXPORT_SYMBOL(memmove);
@@ -522,12 +517,12 @@
* @count: The size of the area.
*/
#undef memcmp
-int memcmp(const void * cs,const void * ct,size_t count)
+int memcmp(const void *cs, const void *ct, size_t count)
{
const unsigned char *su1, *su2;
int res = 0;
- for( su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
if ((res = *su1 - *su2) != 0)
break;
return res;
@@ -545,17 +540,17 @@
* returns the address of the first occurrence of @c, or 1 byte past
* the area if @c is not found
*/
-void * memscan(void * addr, int c, size_t size)
+void *memscan(void *addr, int c, size_t size)
{
- unsigned char * p = (unsigned char *) addr;
+ unsigned char *p = addr;
while (size) {
if (*p == c)
- return (void *) p;
+ return (void *)p;
p++;
size--;
}
- return (void *) p;
+ return (void *)p;
}
EXPORT_SYMBOL(memscan);
#endif
@@ -566,18 +561,18 @@
* @s1: The string to be searched
* @s2: The string to search for
*/
-char * strstr(const char * s1,const char * s2)
+char *strstr(const char *s1, const char *s2)
{
int l1, l2;
l2 = strlen(s2);
if (!l2)
- return (char *) s1;
+ return (char *)s1;
l1 = strlen(s1);
while (l1 >= l2) {
l1--;
- if (!memcmp(s1,s2,l2))
- return (char *) s1;
+ if (!memcmp(s1, s2, l2))
+ return (char *)s1;
s1++;
}
return NULL;
@@ -600,7 +595,7 @@
const unsigned char *p = s;
while (n-- != 0) {
if ((unsigned char)c == *p++) {
- return (void *)(p-1);
+ return (void *)(p - 1);
}
}
return NULL;
diff --git a/lib/textsearch.c b/lib/textsearch.c
index 1e934c1..6f3093e 100644
--- a/lib/textsearch.c
+++ b/lib/textsearch.c
@@ -254,7 +254,7 @@
* parameters or a ERR_PTR().
*/
struct ts_config *textsearch_prepare(const char *algo, const void *pattern,
- unsigned int len, int gfp_mask, int flags)
+ unsigned int len, gfp_t gfp_mask, int flags)
{
int err = -ENOENT;
struct ts_config *conf;
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index e4e9031..b07db5c 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -23,6 +23,7 @@
#include <linux/ctype.h>
#include <linux/kernel.h>
+#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/div64.h>
/**
diff --git a/mm/Kconfig b/mm/Kconfig
index 391ffc5..1a4473fc 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -111,3 +111,24 @@
config SPARSEMEM_EXTREME
def_bool y
depends on SPARSEMEM && !SPARSEMEM_STATIC
+
+# eventually, we can have this option just 'select SPARSEMEM'
+config MEMORY_HOTPLUG
+ bool "Allow for memory hot-add"
+ depends on SPARSEMEM && HOTPLUG && !SOFTWARE_SUSPEND
+
+comment "Memory hotplug is currently incompatible with Software Suspend"
+ depends on SPARSEMEM && HOTPLUG && SOFTWARE_SUSPEND
+
+# Heavily threaded applications may benefit from splitting the mm-wide
+# page_table_lock, so that faults on different parts of the user address
+# space can be handled with less contention: split it at this NR_CPUS.
+# Default to 4 for wider testing, though 8 might be more appropriate.
+# ARM's adjust_pte (unused if VIPT) depends on mm-wide page_table_lock.
+# PA-RISC's debug spinlock_t is too large for the 32-bit struct page.
+#
+config SPLIT_PTLOCK_CPUS
+ int
+ default "4096" if ARM && !CPU_CACHE_VIPT
+ default "4096" if PARISC && DEBUG_SPINLOCK && !64BIT
+ default "4"
diff --git a/mm/Makefile b/mm/Makefile
index 4cd69e3..2fa6d2c 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -18,5 +18,5 @@
obj-$(CONFIG_SPARSEMEM) += sparse.o
obj-$(CONFIG_SHMEM) += shmem.o
obj-$(CONFIG_TINY_SHMEM) += tiny-shmem.o
-
+obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
obj-$(CONFIG_FS_XIP) += filemap_xip.o
diff --git a/mm/bootmem.c b/mm/bootmem.c
index a58699b..e8c5671 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -305,6 +305,7 @@
if (j + 16 < BITS_PER_LONG)
prefetchw(page + j + 16);
__ClearPageReserved(page + j);
+ set_page_count(page + j, 0);
}
__free_pages(page, order);
i += BITS_PER_LONG;
diff --git a/mm/filemap.c b/mm/filemap.c
index b534657..5d6e4c2 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -66,7 +66,7 @@
*
* ->mmap_sem
* ->i_mmap_lock
- * ->page_table_lock (various places, mainly in mmap.c)
+ * ->page_table_lock or pte_lock (various, mainly in memory.c)
* ->mapping->tree_lock (arch-dependent flush_dcache_mmap_lock)
*
* ->mmap_sem
@@ -86,9 +86,9 @@
* ->anon_vma.lock (vma_adjust)
*
* ->anon_vma.lock
- * ->page_table_lock (anon_vma_prepare and various)
+ * ->page_table_lock or pte_lock (anon_vma_prepare and various)
*
- * ->page_table_lock
+ * ->page_table_lock or pte_lock
* ->swap_lock (try_to_unmap_one)
* ->private_lock (try_to_unmap_one)
* ->tree_lock (try_to_unmap_one)
@@ -152,7 +152,7 @@
* in the ->sync_page() methods make essential use of the
* page_mapping(), merely passing the page down to the backing
* device's unplug functions when it's non-NULL, which in turn
- * ignore it for all cases but swap, where only page->private is
+ * ignore it for all cases but swap, where only page_private(page) is
* of interest. When page_mapping() does go NULL, the entire
* call stack gracefully ignores the page and returns.
* -- wli
@@ -377,7 +377,7 @@
* This function does not add the page to the LRU. The caller must do that.
*/
int add_to_page_cache(struct page *page, struct address_space *mapping,
- pgoff_t offset, int gfp_mask)
+ pgoff_t offset, gfp_t gfp_mask)
{
int error = radix_tree_preload(gfp_mask & ~__GFP_HIGHMEM);
@@ -401,7 +401,7 @@
EXPORT_SYMBOL(add_to_page_cache);
int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
- pgoff_t offset, int gfp_mask)
+ pgoff_t offset, gfp_t gfp_mask)
{
int ret = add_to_page_cache(page, mapping, offset, gfp_mask);
if (ret == 0)
@@ -591,7 +591,7 @@
* memory exhaustion.
*/
struct page *find_or_create_page(struct address_space *mapping,
- unsigned long index, unsigned int gfp_mask)
+ unsigned long index, gfp_t gfp_mask)
{
struct page *page, *cached_page = NULL;
int err;
@@ -683,7 +683,7 @@
grab_cache_page_nowait(struct address_space *mapping, unsigned long index)
{
struct page *page = find_get_page(mapping, index);
- unsigned int gfp_mask;
+ gfp_t gfp_mask;
if (page) {
if (!TestSetPageLocked(page))
@@ -1030,8 +1030,8 @@
desc.error = 0;
do_generic_file_read(filp,ppos,&desc,file_read_actor);
retval += desc.written;
- if (!retval) {
- retval = desc.error;
+ if (desc.error) {
+ retval = retval ?: desc.error;
break;
}
}
@@ -1520,7 +1520,7 @@
page_cache_release(page);
return err;
}
- } else {
+ } else if (vma->vm_flags & VM_NONLINEAR) {
/* No page was found just because we can't read it in now (being
* here implies nonblock != 0), but the page may exist, so set
* the PTE to fault it in later. */
@@ -1537,6 +1537,7 @@
return 0;
}
+EXPORT_SYMBOL(filemap_populate);
struct vm_operations_struct generic_file_vm_ops = {
.nopage = filemap_nopage,
@@ -1555,7 +1556,6 @@
vma->vm_ops = &generic_file_vm_ops;
return 0;
}
-EXPORT_SYMBOL(filemap_populate);
/*
* This is for filesystems which do not implement ->writepage.
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 8c199f5..9cf687e 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -174,6 +174,8 @@
unsigned long address;
pte_t *pte;
pte_t pteval;
+ spinlock_t *ptl;
+ struct page *page;
spin_lock(&mapping->i_mmap_lock);
vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
@@ -181,19 +183,17 @@
address = vma->vm_start +
((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
BUG_ON(address < vma->vm_start || address >= vma->vm_end);
- /*
- * We need the page_table_lock to protect us from page faults,
- * munmap, fork, etc...
- */
- pte = page_check_address(ZERO_PAGE(address), mm,
- address);
- if (!IS_ERR(pte)) {
+ page = ZERO_PAGE(address);
+ pte = page_check_address(page, mm, address, &ptl);
+ if (pte) {
/* Nuke the page table entry. */
flush_cache_page(vma, address, pte_pfn(*pte));
pteval = ptep_clear_flush(vma, address, pte);
+ page_remove_rmap(page);
+ dec_mm_counter(mm, file_rss);
BUG_ON(pte_dirty(pteval));
- pte_unmap(pte);
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(pte, ptl);
+ page_cache_release(page);
}
}
spin_unlock(&mapping->i_mmap_lock);
@@ -228,7 +228,7 @@
page = mapping->a_ops->get_xip_page(mapping, pgoff*(PAGE_SIZE/512), 0);
if (!IS_ERR(page)) {
- return page;
+ goto out;
}
if (PTR_ERR(page) != -ENODATA)
return NULL;
@@ -249,6 +249,8 @@
page = ZERO_PAGE(address);
}
+out:
+ page_cache_get(page);
return page;
}
diff --git a/mm/fremap.c b/mm/fremap.c
index ab23a06..d862be3 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -20,33 +20,32 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
-static inline void zap_pte(struct mm_struct *mm, struct vm_area_struct *vma,
+static int zap_pte(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
pte_t pte = *ptep;
+ struct page *page = NULL;
- if (pte_none(pte))
- return;
if (pte_present(pte)) {
unsigned long pfn = pte_pfn(pte);
-
flush_cache_page(vma, addr, pfn);
pte = ptep_clear_flush(vma, addr, ptep);
- if (pfn_valid(pfn)) {
- struct page *page = pfn_to_page(pfn);
- if (!PageReserved(page)) {
- if (pte_dirty(pte))
- set_page_dirty(page);
- page_remove_rmap(page);
- page_cache_release(page);
- dec_mm_counter(mm, rss);
- }
+ if (unlikely(!pfn_valid(pfn))) {
+ print_bad_pte(vma, pte, addr);
+ goto out;
}
+ page = pfn_to_page(pfn);
+ if (pte_dirty(pte))
+ set_page_dirty(page);
+ page_remove_rmap(page);
+ page_cache_release(page);
} else {
if (!pte_file(pte))
free_swap_and_cache(pte_to_swp_entry(pte));
pte_clear(mm, addr, ptep);
}
+out:
+ return !!page;
}
/*
@@ -64,21 +63,20 @@
pud_t *pud;
pgd_t *pgd;
pte_t pte_val;
+ spinlock_t *ptl;
+
+ BUG_ON(vma->vm_flags & VM_RESERVED);
pgd = pgd_offset(mm, addr);
- spin_lock(&mm->page_table_lock);
-
pud = pud_alloc(mm, pgd, addr);
if (!pud)
- goto err_unlock;
-
+ goto out;
pmd = pmd_alloc(mm, pud, addr);
if (!pmd)
- goto err_unlock;
-
- pte = pte_alloc_map(mm, pmd, addr);
+ goto out;
+ pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
if (!pte)
- goto err_unlock;
+ goto out;
/*
* This page may have been truncated. Tell the
@@ -88,29 +86,27 @@
inode = vma->vm_file->f_mapping->host;
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (!page->mapping || page->index >= size)
- goto err_unlock;
+ goto unlock;
err = -ENOMEM;
if (page_mapcount(page) > INT_MAX/2)
- goto err_unlock;
+ goto unlock;
- zap_pte(mm, vma, addr, pte);
+ if (pte_none(*pte) || !zap_pte(mm, vma, addr, pte))
+ inc_mm_counter(mm, file_rss);
- inc_mm_counter(mm,rss);
flush_icache_page(vma, page);
set_pte_at(mm, addr, pte, mk_pte(page, prot));
page_add_file_rmap(page);
pte_val = *pte;
- pte_unmap(pte);
update_mmu_cache(vma, addr, pte_val);
-
err = 0;
-err_unlock:
- spin_unlock(&mm->page_table_lock);
+unlock:
+ pte_unmap_unlock(pte, ptl);
+out:
return err;
}
EXPORT_SYMBOL(install_page);
-
/*
* Install a file pte to a given virtual memory address, release any
* previously existing mapping.
@@ -124,37 +120,35 @@
pud_t *pud;
pgd_t *pgd;
pte_t pte_val;
+ spinlock_t *ptl;
+
+ BUG_ON(vma->vm_flags & VM_RESERVED);
pgd = pgd_offset(mm, addr);
- spin_lock(&mm->page_table_lock);
-
pud = pud_alloc(mm, pgd, addr);
if (!pud)
- goto err_unlock;
-
+ goto out;
pmd = pmd_alloc(mm, pud, addr);
if (!pmd)
- goto err_unlock;
-
- pte = pte_alloc_map(mm, pmd, addr);
+ goto out;
+ pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
if (!pte)
- goto err_unlock;
+ goto out;
- zap_pte(mm, vma, addr, pte);
+ if (!pte_none(*pte) && zap_pte(mm, vma, addr, pte)) {
+ update_hiwater_rss(mm);
+ dec_mm_counter(mm, file_rss);
+ }
set_pte_at(mm, addr, pte, pgoff_to_pte(pgoff));
pte_val = *pte;
- pte_unmap(pte);
update_mmu_cache(vma, addr, pte_val);
- spin_unlock(&mm->page_table_lock);
- return 0;
-
-err_unlock:
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(pte, ptl);
+ err = 0;
+out:
return err;
}
-
/***
* sys_remap_file_pages - remap arbitrary pages of a shared backing store
* file within an existing vma.
diff --git a/mm/highmem.c b/mm/highmem.c
index 90e1861e..ce2e7e8 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -30,11 +30,9 @@
static mempool_t *page_pool, *isa_page_pool;
-static void *page_pool_alloc(gfp_t gfp_mask, void *data)
+static void *page_pool_alloc_isa(gfp_t gfp_mask, void *data)
{
- unsigned int gfp = gfp_mask | (unsigned int) (long) data;
-
- return alloc_page(gfp);
+ return alloc_page(gfp_mask | GFP_DMA);
}
static void page_pool_free(void *page, void *data)
@@ -51,6 +49,12 @@
* n means that there are (n-1) current users of it.
*/
#ifdef CONFIG_HIGHMEM
+
+static void *page_pool_alloc(gfp_t gfp_mask, void *data)
+{
+ return alloc_page(gfp_mask);
+}
+
static int pkmap_count[LAST_PKMAP];
static unsigned int last_pkmap_nr;
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(kmap_lock);
@@ -267,7 +271,7 @@
if (isa_page_pool)
return 0;
- isa_page_pool = mempool_create(ISA_POOL_SIZE, page_pool_alloc, page_pool_free, (void *) __GFP_DMA);
+ isa_page_pool = mempool_create(ISA_POOL_SIZE, page_pool_alloc_isa, page_pool_free, NULL);
if (!isa_page_pool)
BUG();
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 61d3806..c9b4336 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -277,19 +277,23 @@
unsigned long addr;
for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
+ src_pte = huge_pte_offset(src, addr);
+ if (!src_pte)
+ continue;
dst_pte = huge_pte_alloc(dst, addr);
if (!dst_pte)
goto nomem;
+ spin_lock(&dst->page_table_lock);
spin_lock(&src->page_table_lock);
- src_pte = huge_pte_offset(src, addr);
- if (src_pte && !pte_none(*src_pte)) {
+ if (!pte_none(*src_pte)) {
entry = *src_pte;
ptepage = pte_page(entry);
get_page(ptepage);
- add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE);
+ add_mm_counter(dst, file_rss, HPAGE_SIZE / PAGE_SIZE);
set_huge_pte_at(dst, addr, dst_pte, entry);
}
spin_unlock(&src->page_table_lock);
+ spin_unlock(&dst->page_table_lock);
}
return 0;
@@ -310,12 +314,14 @@
BUG_ON(start & ~HPAGE_MASK);
BUG_ON(end & ~HPAGE_MASK);
+ spin_lock(&mm->page_table_lock);
+
+ /* Update high watermark before we lower rss */
+ update_hiwater_rss(mm);
+
for (address = start; address < end; address += HPAGE_SIZE) {
ptep = huge_pte_offset(mm, address);
- if (! ptep)
- /* This can happen on truncate, or if an
- * mmap() is aborted due to an error before
- * the prefault */
+ if (!ptep)
continue;
pte = huge_ptep_get_and_clear(mm, address, ptep);
@@ -324,96 +330,99 @@
page = pte_page(pte);
put_page(page);
- add_mm_counter(mm, rss, - (HPAGE_SIZE / PAGE_SIZE));
+ add_mm_counter(mm, file_rss, (int) -(HPAGE_SIZE / PAGE_SIZE));
}
+
+ spin_unlock(&mm->page_table_lock);
flush_tlb_range(vma, start, end);
}
-void zap_hugepage_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long length)
+static struct page *find_lock_huge_page(struct address_space *mapping,
+ unsigned long idx)
{
- struct mm_struct *mm = vma->vm_mm;
+ struct page *page;
+ int err;
+ struct inode *inode = mapping->host;
+ unsigned long size;
- spin_lock(&mm->page_table_lock);
- unmap_hugepage_range(vma, start, start + length);
- spin_unlock(&mm->page_table_lock);
-}
+retry:
+ page = find_lock_page(mapping, idx);
+ if (page)
+ goto out;
-int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma)
-{
- struct mm_struct *mm = current->mm;
- unsigned long addr;
- int ret = 0;
+ /* Check to make sure the mapping hasn't been truncated */
+ size = i_size_read(inode) >> HPAGE_SHIFT;
+ if (idx >= size)
+ goto out;
- WARN_ON(!is_vm_hugetlb_page(vma));
- BUG_ON(vma->vm_start & ~HPAGE_MASK);
- BUG_ON(vma->vm_end & ~HPAGE_MASK);
+ if (hugetlb_get_quota(mapping))
+ goto out;
+ page = alloc_huge_page();
+ if (!page) {
+ hugetlb_put_quota(mapping);
+ goto out;
+ }
- hugetlb_prefault_arch_hook(mm);
-
- spin_lock(&mm->page_table_lock);
- for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
- unsigned long idx;
- pte_t *pte = huge_pte_alloc(mm, addr);
- struct page *page;
-
- if (!pte) {
- ret = -ENOMEM;
- goto out;
- }
-
- idx = ((addr - vma->vm_start) >> HPAGE_SHIFT)
- + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
- page = find_get_page(mapping, idx);
- if (!page) {
- /* charge the fs quota first */
- if (hugetlb_get_quota(mapping)) {
- ret = -ENOMEM;
- goto out;
- }
- page = alloc_huge_page();
- if (!page) {
- hugetlb_put_quota(mapping);
- ret = -ENOMEM;
- goto out;
- }
- ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC);
- if (! ret) {
- unlock_page(page);
- } else {
- hugetlb_put_quota(mapping);
- free_huge_page(page);
- goto out;
- }
- }
- add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE);
- set_huge_pte_at(mm, addr, pte, make_huge_pte(vma, page));
+ err = add_to_page_cache(page, mapping, idx, GFP_KERNEL);
+ if (err) {
+ put_page(page);
+ hugetlb_put_quota(mapping);
+ if (err == -EEXIST)
+ goto retry;
+ page = NULL;
}
out:
- spin_unlock(&mm->page_table_lock);
- return ret;
+ return page;
}
-/*
- * On ia64 at least, it is possible to receive a hugetlb fault from a
- * stale zero entry left in the TLB from earlier hardware prefetching.
- * Low-level arch code should already have flushed the stale entry as
- * part of its fault handling, but we do need to accept this minor fault
- * and return successfully. Whereas the "normal" case is that this is
- * an access to a hugetlb page which has been truncated off since mmap.
- */
int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long address, int write_access)
{
int ret = VM_FAULT_SIGBUS;
+ unsigned long idx;
+ unsigned long size;
pte_t *pte;
+ struct page *page;
+ struct address_space *mapping;
+
+ pte = huge_pte_alloc(mm, address);
+ if (!pte)
+ goto out;
+
+ mapping = vma->vm_file->f_mapping;
+ idx = ((address - vma->vm_start) >> HPAGE_SHIFT)
+ + (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
+
+ /*
+ * Use page lock to guard against racing truncation
+ * before we get page_table_lock.
+ */
+ page = find_lock_huge_page(mapping, idx);
+ if (!page)
+ goto out;
spin_lock(&mm->page_table_lock);
- pte = huge_pte_offset(mm, address);
- if (pte && !pte_none(*pte))
- ret = VM_FAULT_MINOR;
+ size = i_size_read(mapping->host) >> HPAGE_SHIFT;
+ if (idx >= size)
+ goto backout;
+
+ ret = VM_FAULT_MINOR;
+ if (!pte_none(*pte))
+ goto backout;
+
+ add_mm_counter(mm, file_rss, HPAGE_SIZE / PAGE_SIZE);
+ set_huge_pte_at(mm, address, pte, make_huge_pte(vma, page));
spin_unlock(&mm->page_table_lock);
+ unlock_page(page);
+out:
return ret;
+
+backout:
+ spin_unlock(&mm->page_table_lock);
+ hugetlb_put_quota(mapping);
+ unlock_page(page);
+ put_page(page);
+ goto out;
}
int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
@@ -423,34 +432,36 @@
unsigned long vpfn, vaddr = *position;
int remainder = *length;
- BUG_ON(!is_vm_hugetlb_page(vma));
-
vpfn = vaddr/PAGE_SIZE;
spin_lock(&mm->page_table_lock);
while (vaddr < vma->vm_end && remainder) {
+ pte_t *pte;
+ struct page *page;
+
+ /*
+ * Some archs (sparc64, sh*) have multiple pte_ts to
+ * each hugepage. We have to make * sure we get the
+ * first, for the page indexing below to work.
+ */
+ pte = huge_pte_offset(mm, vaddr & HPAGE_MASK);
+
+ if (!pte || pte_none(*pte)) {
+ int ret;
+
+ spin_unlock(&mm->page_table_lock);
+ ret = hugetlb_fault(mm, vma, vaddr, 0);
+ spin_lock(&mm->page_table_lock);
+ if (ret == VM_FAULT_MINOR)
+ continue;
+
+ remainder = 0;
+ if (!i)
+ i = -EFAULT;
+ break;
+ }
if (pages) {
- pte_t *pte;
- struct page *page;
-
- /* Some archs (sparc64, sh*) have multiple
- * pte_ts to each hugepage. We have to make
- * sure we get the first, for the page
- * indexing below to work. */
- pte = huge_pte_offset(mm, vaddr & HPAGE_MASK);
-
- /* the hugetlb file might have been truncated */
- if (!pte || pte_none(*pte)) {
- remainder = 0;
- if (!i)
- i = -EFAULT;
- break;
- }
-
page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
-
- WARN_ON(!PageCompound(page));
-
get_page(page);
pages[i] = page;
}
diff --git a/mm/madvise.c b/mm/madvise.c
index 20e075d..17aaf3e 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -126,7 +126,7 @@
unsigned long start, unsigned long end)
{
*prev = vma;
- if ((vma->vm_flags & VM_LOCKED) || is_vm_hugetlb_page(vma))
+ if (vma->vm_flags & (VM_LOCKED|VM_HUGETLB|VM_RESERVED))
return -EINVAL;
if (unlikely(vma->vm_flags & VM_NONLINEAR)) {
diff --git a/mm/memory.c b/mm/memory.c
index 1db40e9..0f60baf 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -114,6 +114,7 @@
{
struct page *page = pmd_page(*pmd);
pmd_clear(pmd);
+ pte_lock_deinit(page);
pte_free_tlb(tlb, page);
dec_page_state(nr_page_table_pages);
tlb->mm->nr_ptes--;
@@ -249,7 +250,7 @@
free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
} while (pgd++, addr = next, addr != end);
- if (!tlb_is_full_mm(*tlb))
+ if (!(*tlb)->fullmm)
flush_tlb_pgtables((*tlb)->mm, start, end);
}
@@ -260,6 +261,12 @@
struct vm_area_struct *next = vma->vm_next;
unsigned long addr = vma->vm_start;
+ /*
+ * Hide vma from rmap and vmtruncate before freeing pgtables
+ */
+ anon_vma_unlink(vma);
+ unlink_file_vma(vma);
+
if (is_hugepage_only_range(vma->vm_mm, addr, HPAGE_SIZE)) {
hugetlb_free_pgd_range(tlb, addr, vma->vm_end,
floor, next? next->vm_start: ceiling);
@@ -272,6 +279,8 @@
HPAGE_SIZE)) {
vma = next;
next = vma->vm_next;
+ anon_vma_unlink(vma);
+ unlink_file_vma(vma);
}
free_pgd_range(tlb, addr, vma->vm_end,
floor, next? next->vm_start: ceiling);
@@ -280,72 +289,78 @@
}
}
-pte_t fastcall *pte_alloc_map(struct mm_struct *mm, pmd_t *pmd,
- unsigned long address)
+int __pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address)
{
- if (!pmd_present(*pmd)) {
- struct page *new;
+ struct page *new = pte_alloc_one(mm, address);
+ if (!new)
+ return -ENOMEM;
- spin_unlock(&mm->page_table_lock);
- new = pte_alloc_one(mm, address);
- spin_lock(&mm->page_table_lock);
- if (!new)
- return NULL;
- /*
- * Because we dropped the lock, we should re-check the
- * entry, as somebody else could have populated it..
- */
- if (pmd_present(*pmd)) {
- pte_free(new);
- goto out;
- }
+ pte_lock_init(new);
+ spin_lock(&mm->page_table_lock);
+ if (pmd_present(*pmd)) { /* Another has populated it */
+ pte_lock_deinit(new);
+ pte_free(new);
+ } else {
mm->nr_ptes++;
inc_page_state(nr_page_table_pages);
pmd_populate(mm, pmd, new);
}
-out:
- return pte_offset_map(pmd, address);
+ spin_unlock(&mm->page_table_lock);
+ return 0;
}
-pte_t fastcall * pte_alloc_kernel(struct mm_struct *mm, pmd_t *pmd, unsigned long address)
+int __pte_alloc_kernel(pmd_t *pmd, unsigned long address)
{
- if (!pmd_present(*pmd)) {
- pte_t *new;
+ pte_t *new = pte_alloc_one_kernel(&init_mm, address);
+ if (!new)
+ return -ENOMEM;
- spin_unlock(&mm->page_table_lock);
- new = pte_alloc_one_kernel(mm, address);
- spin_lock(&mm->page_table_lock);
- if (!new)
- return NULL;
+ spin_lock(&init_mm.page_table_lock);
+ if (pmd_present(*pmd)) /* Another has populated it */
+ pte_free_kernel(new);
+ else
+ pmd_populate_kernel(&init_mm, pmd, new);
+ spin_unlock(&init_mm.page_table_lock);
+ return 0;
+}
- /*
- * Because we dropped the lock, we should re-check the
- * entry, as somebody else could have populated it..
- */
- if (pmd_present(*pmd)) {
- pte_free_kernel(new);
- goto out;
- }
- pmd_populate_kernel(mm, pmd, new);
- }
-out:
- return pte_offset_kernel(pmd, address);
+static inline void add_mm_rss(struct mm_struct *mm, int file_rss, int anon_rss)
+{
+ if (file_rss)
+ add_mm_counter(mm, file_rss, file_rss);
+ if (anon_rss)
+ add_mm_counter(mm, anon_rss, anon_rss);
+}
+
+/*
+ * This function is called to print an error when a pte in a
+ * !VM_RESERVED region is found pointing to an invalid pfn (which
+ * is an error.
+ *
+ * The calling function must still handle the error.
+ */
+void print_bad_pte(struct vm_area_struct *vma, pte_t pte, unsigned long vaddr)
+{
+ printk(KERN_ERR "Bad pte = %08llx, process = %s, "
+ "vm_flags = %lx, vaddr = %lx\n",
+ (long long)pte_val(pte),
+ (vma->vm_mm == current->mm ? current->comm : "???"),
+ vma->vm_flags, vaddr);
+ dump_stack();
}
/*
* copy one vm_area from one task to the other. Assumes the page tables
* already present in the new task to be cleared in the whole range
* covered by this vma.
- *
- * dst->page_table_lock is held on entry and exit,
- * but may be dropped within p[mg]d_alloc() and pte_alloc_map().
*/
static inline void
copy_one_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
- pte_t *dst_pte, pte_t *src_pte, unsigned long vm_flags,
- unsigned long addr)
+ pte_t *dst_pte, pte_t *src_pte, struct vm_area_struct *vma,
+ unsigned long addr, int *rss)
{
+ unsigned long vm_flags = vma->vm_flags;
pte_t pte = *src_pte;
struct page *page;
unsigned long pfn;
@@ -357,29 +372,32 @@
/* make sure dst_mm is on swapoff's mmlist. */
if (unlikely(list_empty(&dst_mm->mmlist))) {
spin_lock(&mmlist_lock);
- list_add(&dst_mm->mmlist, &src_mm->mmlist);
+ if (list_empty(&dst_mm->mmlist))
+ list_add(&dst_mm->mmlist,
+ &src_mm->mmlist);
spin_unlock(&mmlist_lock);
}
}
- set_pte_at(dst_mm, addr, dst_pte, pte);
- return;
+ goto out_set_pte;
}
+ /* If the region is VM_RESERVED, the mapping is not
+ * mapped via rmap - duplicate the pte as is.
+ */
+ if (vm_flags & VM_RESERVED)
+ goto out_set_pte;
+
pfn = pte_pfn(pte);
- /* the pte points outside of valid memory, the
- * mapping is assumed to be good, meaningful
- * and not mapped via rmap - duplicate the
- * mapping as is.
+ /* If the pte points outside of valid memory but
+ * the region is not VM_RESERVED, we have a problem.
*/
- page = NULL;
- if (pfn_valid(pfn))
- page = pfn_to_page(pfn);
-
- if (!page || PageReserved(page)) {
- set_pte_at(dst_mm, addr, dst_pte, pte);
- return;
+ if (unlikely(!pfn_valid(pfn))) {
+ print_bad_pte(vma, pte, addr);
+ goto out_set_pte; /* try to do something sane */
}
+ page = pfn_to_page(pfn);
+
/*
* If it's a COW mapping, write protect it both
* in the parent and the child
@@ -397,11 +415,11 @@
pte = pte_mkclean(pte);
pte = pte_mkold(pte);
get_page(page);
- inc_mm_counter(dst_mm, rss);
- if (PageAnon(page))
- inc_mm_counter(dst_mm, anon_rss);
- set_pte_at(dst_mm, addr, dst_pte, pte);
page_dup_rmap(page);
+ rss[!!PageAnon(page)]++;
+
+out_set_pte:
+ set_pte_at(dst_mm, addr, dst_pte, pte);
}
static int copy_pte_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
@@ -409,38 +427,44 @@
unsigned long addr, unsigned long end)
{
pte_t *src_pte, *dst_pte;
- unsigned long vm_flags = vma->vm_flags;
- int progress;
+ spinlock_t *src_ptl, *dst_ptl;
+ int progress = 0;
+ int rss[2];
again:
- dst_pte = pte_alloc_map(dst_mm, dst_pmd, addr);
+ rss[1] = rss[0] = 0;
+ dst_pte = pte_alloc_map_lock(dst_mm, dst_pmd, addr, &dst_ptl);
if (!dst_pte)
return -ENOMEM;
src_pte = pte_offset_map_nested(src_pmd, addr);
+ src_ptl = pte_lockptr(src_mm, src_pmd);
+ spin_lock(src_ptl);
- progress = 0;
- spin_lock(&src_mm->page_table_lock);
do {
/*
* We are holding two locks at this point - either of them
* could generate latencies in another task on another CPU.
*/
- if (progress >= 32 && (need_resched() ||
- need_lockbreak(&src_mm->page_table_lock) ||
- need_lockbreak(&dst_mm->page_table_lock)))
- break;
+ if (progress >= 32) {
+ progress = 0;
+ if (need_resched() ||
+ need_lockbreak(src_ptl) ||
+ need_lockbreak(dst_ptl))
+ break;
+ }
if (pte_none(*src_pte)) {
progress++;
continue;
}
- copy_one_pte(dst_mm, src_mm, dst_pte, src_pte, vm_flags, addr);
+ copy_one_pte(dst_mm, src_mm, dst_pte, src_pte, vma, addr, rss);
progress += 8;
} while (dst_pte++, src_pte++, addr += PAGE_SIZE, addr != end);
- spin_unlock(&src_mm->page_table_lock);
+ spin_unlock(src_ptl);
pte_unmap_nested(src_pte - 1);
- pte_unmap(dst_pte - 1);
- cond_resched_lock(&dst_mm->page_table_lock);
+ add_mm_rss(dst_mm, rss[0], rss[1]);
+ pte_unmap_unlock(dst_pte - 1, dst_ptl);
+ cond_resched();
if (addr != end)
goto again;
return 0;
@@ -525,24 +549,30 @@
return 0;
}
-static void zap_pte_range(struct mmu_gather *tlb, pmd_t *pmd,
+static void zap_pte_range(struct mmu_gather *tlb,
+ struct vm_area_struct *vma, pmd_t *pmd,
unsigned long addr, unsigned long end,
struct zap_details *details)
{
+ struct mm_struct *mm = tlb->mm;
pte_t *pte;
+ spinlock_t *ptl;
+ int file_rss = 0;
+ int anon_rss = 0;
- pte = pte_offset_map(pmd, addr);
+ pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
do {
pte_t ptent = *pte;
if (pte_none(ptent))
continue;
if (pte_present(ptent)) {
struct page *page = NULL;
- unsigned long pfn = pte_pfn(ptent);
- if (pfn_valid(pfn)) {
- page = pfn_to_page(pfn);
- if (PageReserved(page))
- page = NULL;
+ if (!(vma->vm_flags & VM_RESERVED)) {
+ unsigned long pfn = pte_pfn(ptent);
+ if (unlikely(!pfn_valid(pfn)))
+ print_bad_pte(vma, ptent, addr);
+ else
+ page = pfn_to_page(pfn);
}
if (unlikely(details) && page) {
/*
@@ -562,7 +592,7 @@
page->index > details->last_index))
continue;
}
- ptent = ptep_get_and_clear_full(tlb->mm, addr, pte,
+ ptent = ptep_get_and_clear_full(mm, addr, pte,
tlb->fullmm);
tlb_remove_tlb_entry(tlb, pte, addr);
if (unlikely(!page))
@@ -570,15 +600,17 @@
if (unlikely(details) && details->nonlinear_vma
&& linear_page_index(details->nonlinear_vma,
addr) != page->index)
- set_pte_at(tlb->mm, addr, pte,
+ set_pte_at(mm, addr, pte,
pgoff_to_pte(page->index));
- if (pte_dirty(ptent))
- set_page_dirty(page);
if (PageAnon(page))
- dec_mm_counter(tlb->mm, anon_rss);
- else if (pte_young(ptent))
- mark_page_accessed(page);
- tlb->freed++;
+ anon_rss--;
+ else {
+ if (pte_dirty(ptent))
+ set_page_dirty(page);
+ if (pte_young(ptent))
+ mark_page_accessed(page);
+ file_rss--;
+ }
page_remove_rmap(page);
tlb_remove_page(tlb, page);
continue;
@@ -591,12 +623,15 @@
continue;
if (!pte_file(ptent))
free_swap_and_cache(pte_to_swp_entry(ptent));
- pte_clear_full(tlb->mm, addr, pte, tlb->fullmm);
+ pte_clear_full(mm, addr, pte, tlb->fullmm);
} while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap(pte - 1);
+
+ add_mm_rss(mm, file_rss, anon_rss);
+ pte_unmap_unlock(pte - 1, ptl);
}
-static inline void zap_pmd_range(struct mmu_gather *tlb, pud_t *pud,
+static inline void zap_pmd_range(struct mmu_gather *tlb,
+ struct vm_area_struct *vma, pud_t *pud,
unsigned long addr, unsigned long end,
struct zap_details *details)
{
@@ -608,11 +643,12 @@
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
- zap_pte_range(tlb, pmd, addr, next, details);
+ zap_pte_range(tlb, vma, pmd, addr, next, details);
} while (pmd++, addr = next, addr != end);
}
-static inline void zap_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
+static inline void zap_pud_range(struct mmu_gather *tlb,
+ struct vm_area_struct *vma, pgd_t *pgd,
unsigned long addr, unsigned long end,
struct zap_details *details)
{
@@ -624,7 +660,7 @@
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud))
continue;
- zap_pmd_range(tlb, pud, addr, next, details);
+ zap_pmd_range(tlb, vma, pud, addr, next, details);
} while (pud++, addr = next, addr != end);
}
@@ -645,7 +681,7 @@
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
- zap_pud_range(tlb, pgd, addr, next, details);
+ zap_pud_range(tlb, vma, pgd, addr, next, details);
} while (pgd++, addr = next, addr != end);
tlb_end_vma(tlb, vma);
}
@@ -660,7 +696,6 @@
/**
* unmap_vmas - unmap a range of memory covered by a list of vma's
* @tlbp: address of the caller's struct mmu_gather
- * @mm: the controlling mm_struct
* @vma: the starting vma
* @start_addr: virtual address at which to start unmapping
* @end_addr: virtual address at which to end unmapping
@@ -669,10 +704,10 @@
*
* Returns the end address of the unmapping (restart addr if interrupted).
*
- * Unmap all pages in the vma list. Called under page_table_lock.
+ * Unmap all pages in the vma list.
*
- * We aim to not hold page_table_lock for too long (for scheduling latency
- * reasons). So zap pages in ZAP_BLOCK_SIZE bytecounts. This means we need to
+ * We aim to not hold locks for too long (for scheduling latency reasons).
+ * So zap pages in ZAP_BLOCK_SIZE bytecounts. This means we need to
* return the ending mmu_gather to the caller.
*
* Only addresses between `start' and `end' will be unmapped.
@@ -684,7 +719,7 @@
* ensure that any thus-far unmapped pages are flushed before unmap_vmas()
* drops the lock and schedules.
*/
-unsigned long unmap_vmas(struct mmu_gather **tlbp, struct mm_struct *mm,
+unsigned long unmap_vmas(struct mmu_gather **tlbp,
struct vm_area_struct *vma, unsigned long start_addr,
unsigned long end_addr, unsigned long *nr_accounted,
struct zap_details *details)
@@ -694,7 +729,7 @@
int tlb_start_valid = 0;
unsigned long start = start_addr;
spinlock_t *i_mmap_lock = details? details->i_mmap_lock: NULL;
- int fullmm = tlb_is_full_mm(*tlbp);
+ int fullmm = (*tlbp)->fullmm;
for ( ; vma && vma->vm_start < end_addr; vma = vma->vm_next) {
unsigned long end;
@@ -734,19 +769,15 @@
tlb_finish_mmu(*tlbp, tlb_start, start);
if (need_resched() ||
- need_lockbreak(&mm->page_table_lock) ||
(i_mmap_lock && need_lockbreak(i_mmap_lock))) {
if (i_mmap_lock) {
- /* must reset count of rss freed */
- *tlbp = tlb_gather_mmu(mm, fullmm);
+ *tlbp = NULL;
goto out;
}
- spin_unlock(&mm->page_table_lock);
cond_resched();
- spin_lock(&mm->page_table_lock);
}
- *tlbp = tlb_gather_mmu(mm, fullmm);
+ *tlbp = tlb_gather_mmu(vma->vm_mm, fullmm);
tlb_start_valid = 0;
zap_bytes = ZAP_BLOCK_SIZE;
}
@@ -770,123 +801,93 @@
unsigned long end = address + size;
unsigned long nr_accounted = 0;
- if (is_vm_hugetlb_page(vma)) {
- zap_hugepage_range(vma, address, size);
- return end;
- }
-
lru_add_drain();
- spin_lock(&mm->page_table_lock);
tlb = tlb_gather_mmu(mm, 0);
- end = unmap_vmas(&tlb, mm, vma, address, end, &nr_accounted, details);
- tlb_finish_mmu(tlb, address, end);
- spin_unlock(&mm->page_table_lock);
+ update_hiwater_rss(mm);
+ end = unmap_vmas(&tlb, vma, address, end, &nr_accounted, details);
+ if (tlb)
+ tlb_finish_mmu(tlb, address, end);
return end;
}
/*
* Do a quick page-table lookup for a single page.
- * mm->page_table_lock must be held.
*/
-static struct page *__follow_page(struct mm_struct *mm, unsigned long address,
- int read, int write, int accessed)
+struct page *follow_page(struct mm_struct *mm, unsigned long address,
+ unsigned int flags)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ptep, pte;
+ spinlock_t *ptl;
unsigned long pfn;
struct page *page;
- page = follow_huge_addr(mm, address, write);
- if (! IS_ERR(page))
- return page;
+ page = follow_huge_addr(mm, address, flags & FOLL_WRITE);
+ if (!IS_ERR(page)) {
+ BUG_ON(flags & FOLL_GET);
+ goto out;
+ }
+ page = NULL;
pgd = pgd_offset(mm, address);
if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
- goto out;
+ goto no_page_table;
pud = pud_offset(pgd, address);
if (pud_none(*pud) || unlikely(pud_bad(*pud)))
- goto out;
+ goto no_page_table;
pmd = pmd_offset(pud, address);
if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
- goto out;
- if (pmd_huge(*pmd))
- return follow_huge_pmd(mm, address, pmd, write);
+ goto no_page_table;
- ptep = pte_offset_map(pmd, address);
+ if (pmd_huge(*pmd)) {
+ BUG_ON(flags & FOLL_GET);
+ page = follow_huge_pmd(mm, address, pmd, flags & FOLL_WRITE);
+ goto out;
+ }
+
+ ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
if (!ptep)
goto out;
pte = *ptep;
- pte_unmap(ptep);
- if (pte_present(pte)) {
- if (write && !pte_write(pte))
- goto out;
- if (read && !pte_read(pte))
- goto out;
- pfn = pte_pfn(pte);
- if (pfn_valid(pfn)) {
- page = pfn_to_page(pfn);
- if (accessed) {
- if (write && !pte_dirty(pte) &&!PageDirty(page))
- set_page_dirty(page);
- mark_page_accessed(page);
- }
- return page;
- }
+ if (!pte_present(pte))
+ goto unlock;
+ if ((flags & FOLL_WRITE) && !pte_write(pte))
+ goto unlock;
+ pfn = pte_pfn(pte);
+ if (!pfn_valid(pfn))
+ goto unlock;
+
+ page = pfn_to_page(pfn);
+ if (flags & FOLL_GET)
+ get_page(page);
+ if (flags & FOLL_TOUCH) {
+ if ((flags & FOLL_WRITE) &&
+ !pte_dirty(pte) && !PageDirty(page))
+ set_page_dirty(page);
+ mark_page_accessed(page);
}
-
+unlock:
+ pte_unmap_unlock(ptep, ptl);
out:
- return NULL;
-}
+ return page;
-inline struct page *
-follow_page(struct mm_struct *mm, unsigned long address, int write)
-{
- return __follow_page(mm, address, 0, write, 1);
-}
-
-/*
- * check_user_page_readable() can be called frm niterrupt context by oprofile,
- * so we need to avoid taking any non-irq-safe locks
- */
-int check_user_page_readable(struct mm_struct *mm, unsigned long address)
-{
- return __follow_page(mm, address, 1, 0, 0) != NULL;
-}
-EXPORT_SYMBOL(check_user_page_readable);
-
-static inline int
-untouched_anonymous_page(struct mm_struct* mm, struct vm_area_struct *vma,
- unsigned long address)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
-
- /* Check if the vma is for an anonymous mapping. */
- if (vma->vm_ops && vma->vm_ops->nopage)
- return 0;
-
- /* Check if page directory entry exists. */
- pgd = pgd_offset(mm, address);
- if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
- return 1;
-
- pud = pud_offset(pgd, address);
- if (pud_none(*pud) || unlikely(pud_bad(*pud)))
- return 1;
-
- /* Check if page middle directory entry exists. */
- pmd = pmd_offset(pud, address);
- if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
- return 1;
-
- /* There is a pte slot for 'address' in 'mm'. */
- return 0;
+no_page_table:
+ /*
+ * When core dumping an enormous anonymous area that nobody
+ * has touched so far, we don't want to allocate page tables.
+ */
+ if (flags & FOLL_ANON) {
+ page = ZERO_PAGE(address);
+ if (flags & FOLL_GET)
+ get_page(page);
+ BUG_ON(flags & FOLL_WRITE);
+ }
+ return page;
}
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
@@ -894,18 +895,19 @@
struct page **pages, struct vm_area_struct **vmas)
{
int i;
- unsigned int flags;
+ unsigned int vm_flags;
/*
* Require read or write permissions.
* If 'force' is set, we only require the "MAY" flags.
*/
- flags = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
- flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
+ vm_flags = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
+ vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
i = 0;
do {
- struct vm_area_struct * vma;
+ struct vm_area_struct *vma;
+ unsigned int foll_flags;
vma = find_extend_vma(mm, start);
if (!vma && in_gate_area(tsk, start)) {
@@ -945,8 +947,8 @@
continue;
}
- if (!vma || (vma->vm_flags & VM_IO)
- || !(flags & vma->vm_flags))
+ if (!vma || (vma->vm_flags & (VM_IO | VM_RESERVED))
+ || !(vm_flags & vma->vm_flags))
return i ? : -EFAULT;
if (is_vm_hugetlb_page(vma)) {
@@ -954,29 +956,25 @@
&start, &len, i);
continue;
}
- spin_lock(&mm->page_table_lock);
+
+ foll_flags = FOLL_TOUCH;
+ if (pages)
+ foll_flags |= FOLL_GET;
+ if (!write && !(vma->vm_flags & VM_LOCKED) &&
+ (!vma->vm_ops || !vma->vm_ops->nopage))
+ foll_flags |= FOLL_ANON;
+
do {
- int write_access = write;
struct page *page;
- cond_resched_lock(&mm->page_table_lock);
- while (!(page = follow_page(mm, start, write_access))) {
+ if (write)
+ foll_flags |= FOLL_WRITE;
+
+ cond_resched();
+ while (!(page = follow_page(mm, start, foll_flags))) {
int ret;
-
- /*
- * Shortcut for anonymous pages. We don't want
- * to force the creation of pages tables for
- * insanely big anonymously mapped areas that
- * nobody touched so far. This is important
- * for doing a core dump for these mappings.
- */
- if (!write && untouched_anonymous_page(mm,vma,start)) {
- page = ZERO_PAGE(start);
- break;
- }
- spin_unlock(&mm->page_table_lock);
- ret = __handle_mm_fault(mm, vma, start, write_access);
-
+ ret = __handle_mm_fault(mm, vma, start,
+ foll_flags & FOLL_WRITE);
/*
* The VM_FAULT_WRITE bit tells us that do_wp_page has
* broken COW when necessary, even if maybe_mkwrite
@@ -984,7 +982,7 @@
* subsequent page lookups as if they were reads.
*/
if (ret & VM_FAULT_WRITE)
- write_access = 0;
+ foll_flags &= ~FOLL_WRITE;
switch (ret & ~VM_FAULT_WRITE) {
case VM_FAULT_MINOR:
@@ -1000,13 +998,10 @@
default:
BUG();
}
- spin_lock(&mm->page_table_lock);
}
if (pages) {
pages[i] = page;
flush_dcache_page(page);
- if (!PageReserved(page))
- page_cache_get(page);
}
if (vmas)
vmas[i] = vma;
@@ -1014,7 +1009,6 @@
start += PAGE_SIZE;
len--;
} while (len && start < vma->vm_end);
- spin_unlock(&mm->page_table_lock);
} while (len);
return i;
}
@@ -1024,16 +1018,21 @@
unsigned long addr, unsigned long end, pgprot_t prot)
{
pte_t *pte;
+ spinlock_t *ptl;
- pte = pte_alloc_map(mm, pmd, addr);
+ pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
if (!pte)
return -ENOMEM;
do {
- pte_t zero_pte = pte_wrprotect(mk_pte(ZERO_PAGE(addr), prot));
+ struct page *page = ZERO_PAGE(addr);
+ pte_t zero_pte = pte_wrprotect(mk_pte(page, prot));
+ page_cache_get(page);
+ page_add_file_rmap(page);
+ inc_mm_counter(mm, file_rss);
BUG_ON(!pte_none(*pte));
set_pte_at(mm, addr, pte, zero_pte);
} while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap(pte - 1);
+ pte_unmap_unlock(pte - 1, ptl);
return 0;
}
@@ -1083,14 +1082,12 @@
BUG_ON(addr >= end);
pgd = pgd_offset(mm, addr);
flush_cache_range(vma, addr, end);
- spin_lock(&mm->page_table_lock);
do {
next = pgd_addr_end(addr, end);
err = zeromap_pud_range(mm, pgd, addr, next, prot);
if (err)
break;
} while (pgd++, addr = next, addr != end);
- spin_unlock(&mm->page_table_lock);
return err;
}
@@ -1104,17 +1101,17 @@
unsigned long pfn, pgprot_t prot)
{
pte_t *pte;
+ spinlock_t *ptl;
- pte = pte_alloc_map(mm, pmd, addr);
+ pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
if (!pte)
return -ENOMEM;
do {
BUG_ON(!pte_none(*pte));
- if (!pfn_valid(pfn) || PageReserved(pfn_to_page(pfn)))
- set_pte_at(mm, addr, pte, pfn_pte(pfn, prot));
+ set_pte_at(mm, addr, pte, pfn_pte(pfn, prot));
pfn++;
} while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap(pte - 1);
+ pte_unmap_unlock(pte - 1, ptl);
return 0;
}
@@ -1173,8 +1170,8 @@
* rest of the world about it:
* VM_IO tells people not to look at these pages
* (accesses can have side effects).
- * VM_RESERVED tells swapout not to try to touch
- * this region.
+ * VM_RESERVED tells the core MM not to "manage" these pages
+ * (e.g. refcount, mapcount, try to swap them out).
*/
vma->vm_flags |= VM_IO | VM_RESERVED;
@@ -1182,7 +1179,6 @@
pfn -= addr >> PAGE_SHIFT;
pgd = pgd_offset(mm, addr);
flush_cache_range(vma, addr, end);
- spin_lock(&mm->page_table_lock);
do {
next = pgd_addr_end(addr, end);
err = remap_pud_range(mm, pgd, addr, next,
@@ -1190,12 +1186,36 @@
if (err)
break;
} while (pgd++, addr = next, addr != end);
- spin_unlock(&mm->page_table_lock);
return err;
}
EXPORT_SYMBOL(remap_pfn_range);
/*
+ * handle_pte_fault chooses page fault handler according to an entry
+ * which was read non-atomically. Before making any commitment, on
+ * those architectures or configurations (e.g. i386 with PAE) which
+ * might give a mix of unmatched parts, do_swap_page and do_file_page
+ * must check under lock before unmapping the pte and proceeding
+ * (but do_wp_page is only called after already making such a check;
+ * and do_anonymous_page and do_no_page can safely check later on).
+ */
+static inline int pte_unmap_same(struct mm_struct *mm, pmd_t *pmd,
+ pte_t *page_table, pte_t orig_pte)
+{
+ int same = 1;
+#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT)
+ if (sizeof(pte_t) > sizeof(unsigned long)) {
+ spinlock_t *ptl = pte_lockptr(mm, pmd);
+ spin_lock(ptl);
+ same = pte_same(*page_table, orig_pte);
+ spin_unlock(ptl);
+ }
+#endif
+ pte_unmap(page_table);
+ return same;
+}
+
+/*
* Do pte_mkwrite, but only if the vma says VM_WRITE. We do this when
* servicing faults for write access. In the normal case, do always want
* pte_mkwrite. But get_user_pages can cause write faults for mappings
@@ -1209,28 +1229,10 @@
}
/*
- * We hold the mm semaphore for reading and vma->vm_mm->page_table_lock
- */
-static inline void break_cow(struct vm_area_struct * vma, struct page * new_page, unsigned long address,
- pte_t *page_table)
-{
- pte_t entry;
-
- entry = maybe_mkwrite(pte_mkdirty(mk_pte(new_page, vma->vm_page_prot)),
- vma);
- ptep_establish(vma, address, page_table, entry);
- update_mmu_cache(vma, address, entry);
- lazy_mmu_prot_update(entry);
-}
-
-/*
* This routine handles present pages, when users try to write
* to a shared page. It is done by copying the page to a new address
* and decrementing the shared-page counter for the old page.
*
- * Goto-purists beware: the only reason for goto's here is that it results
- * in better assembly code.. The "default" path will see no jumps at all.
- *
* Note that this routine assumes that the protection checks have been
* done by the caller (the low-level page fault routine in most cases).
* Thus we can safely just mark it writable once we've done any necessary
@@ -1240,28 +1242,28 @@
* change only once the write actually happens. This avoids a few races,
* and potentially makes it more efficient.
*
- * We hold the mm semaphore and the page_table_lock on entry and exit
- * with the page_table_lock released.
+ * We enter with non-exclusive mmap_sem (to exclude vma changes,
+ * but allow concurrent faults), with pte both mapped and locked.
+ * We return with mmap_sem still held, but pte unmapped and unlocked.
*/
-static int do_wp_page(struct mm_struct *mm, struct vm_area_struct * vma,
- unsigned long address, pte_t *page_table, pmd_t *pmd, pte_t pte)
+static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
+ unsigned long address, pte_t *page_table, pmd_t *pmd,
+ spinlock_t *ptl, pte_t orig_pte)
{
struct page *old_page, *new_page;
- unsigned long pfn = pte_pfn(pte);
+ unsigned long pfn = pte_pfn(orig_pte);
pte_t entry;
- int ret;
+ int ret = VM_FAULT_MINOR;
+
+ BUG_ON(vma->vm_flags & VM_RESERVED);
if (unlikely(!pfn_valid(pfn))) {
/*
- * This should really halt the system so it can be debugged or
- * at least the kernel stops what it's doing before it corrupts
- * data, but for the moment just pretend this is OOM.
+ * Page table corrupted: show pte and kill process.
*/
- pte_unmap(page_table);
- printk(KERN_ERR "do_wp_page: bogus page at address %08lx\n",
- address);
- spin_unlock(&mm->page_table_lock);
- return VM_FAULT_OOM;
+ print_bad_pte(vma, orig_pte, address);
+ ret = VM_FAULT_OOM;
+ goto unlock;
}
old_page = pfn_to_page(pfn);
@@ -1270,52 +1272,51 @@
unlock_page(old_page);
if (reuse) {
flush_cache_page(vma, address, pfn);
- entry = maybe_mkwrite(pte_mkyoung(pte_mkdirty(pte)),
- vma);
+ entry = pte_mkyoung(orig_pte);
+ entry = maybe_mkwrite(pte_mkdirty(entry), vma);
ptep_set_access_flags(vma, address, page_table, entry, 1);
update_mmu_cache(vma, address, entry);
lazy_mmu_prot_update(entry);
- pte_unmap(page_table);
- spin_unlock(&mm->page_table_lock);
- return VM_FAULT_MINOR|VM_FAULT_WRITE;
+ ret |= VM_FAULT_WRITE;
+ goto unlock;
}
}
- pte_unmap(page_table);
/*
* Ok, we need to copy. Oh, well..
*/
- if (!PageReserved(old_page))
- page_cache_get(old_page);
- spin_unlock(&mm->page_table_lock);
+ page_cache_get(old_page);
+ pte_unmap_unlock(page_table, ptl);
if (unlikely(anon_vma_prepare(vma)))
- goto no_new_page;
+ goto oom;
if (old_page == ZERO_PAGE(address)) {
new_page = alloc_zeroed_user_highpage(vma, address);
if (!new_page)
- goto no_new_page;
+ goto oom;
} else {
new_page = alloc_page_vma(GFP_HIGHUSER, vma, address);
if (!new_page)
- goto no_new_page;
+ goto oom;
copy_user_highpage(new_page, old_page, address);
}
+
/*
* Re-check the pte - we dropped the lock
*/
- ret = VM_FAULT_MINOR;
- spin_lock(&mm->page_table_lock);
- page_table = pte_offset_map(pmd, address);
- if (likely(pte_same(*page_table, pte))) {
- if (PageAnon(old_page))
- dec_mm_counter(mm, anon_rss);
- if (PageReserved(old_page))
- inc_mm_counter(mm, rss);
- else
- page_remove_rmap(old_page);
+ page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
+ if (likely(pte_same(*page_table, orig_pte))) {
+ page_remove_rmap(old_page);
+ if (!PageAnon(old_page)) {
+ inc_mm_counter(mm, anon_rss);
+ dec_mm_counter(mm, file_rss);
+ }
flush_cache_page(vma, address, pfn);
- break_cow(vma, new_page, address, page_table);
+ entry = mk_pte(new_page, vma->vm_page_prot);
+ entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+ ptep_establish(vma, address, page_table, entry);
+ update_mmu_cache(vma, address, entry);
+ lazy_mmu_prot_update(entry);
lru_cache_add_active(new_page);
page_add_anon_rmap(new_page, vma, address);
@@ -1323,13 +1324,12 @@
new_page = old_page;
ret |= VM_FAULT_WRITE;
}
- pte_unmap(page_table);
page_cache_release(new_page);
page_cache_release(old_page);
- spin_unlock(&mm->page_table_lock);
+unlock:
+ pte_unmap_unlock(page_table, ptl);
return ret;
-
-no_new_page:
+oom:
page_cache_release(old_page);
return VM_FAULT_OOM;
}
@@ -1399,13 +1399,6 @@
restart_addr = zap_page_range(vma, start_addr,
end_addr - start_addr, details);
-
- /*
- * We cannot rely on the break test in unmap_vmas:
- * on the one hand, we don't want to restart our loop
- * just because that broke out for the page_table_lock;
- * on the other hand, it does no test when vma is small.
- */
need_break = need_resched() ||
need_lockbreak(details->i_mmap_lock);
@@ -1654,38 +1647,37 @@
}
/*
- * We hold the mm semaphore and the page_table_lock on entry and
- * should release the pagetable lock on exit..
+ * We enter with non-exclusive mmap_sem (to exclude vma changes,
+ * but allow concurrent faults), and pte mapped but not yet locked.
+ * We return with mmap_sem still held, but pte unmapped and unlocked.
*/
-static int do_swap_page(struct mm_struct * mm,
- struct vm_area_struct * vma, unsigned long address,
- pte_t *page_table, pmd_t *pmd, pte_t orig_pte, int write_access)
+static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
+ unsigned long address, pte_t *page_table, pmd_t *pmd,
+ int write_access, pte_t orig_pte)
{
+ spinlock_t *ptl;
struct page *page;
- swp_entry_t entry = pte_to_swp_entry(orig_pte);
+ swp_entry_t entry;
pte_t pte;
int ret = VM_FAULT_MINOR;
- pte_unmap(page_table);
- spin_unlock(&mm->page_table_lock);
+ if (!pte_unmap_same(mm, pmd, page_table, orig_pte))
+ goto out;
+
+ entry = pte_to_swp_entry(orig_pte);
page = lookup_swap_cache(entry);
if (!page) {
swapin_readahead(entry, address, vma);
page = read_swap_cache_async(entry, vma, address);
if (!page) {
/*
- * Back out if somebody else faulted in this pte while
- * we released the page table lock.
+ * Back out if somebody else faulted in this pte
+ * while we released the pte lock.
*/
- spin_lock(&mm->page_table_lock);
- page_table = pte_offset_map(pmd, address);
+ page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
if (likely(pte_same(*page_table, orig_pte)))
ret = VM_FAULT_OOM;
- else
- ret = VM_FAULT_MINOR;
- pte_unmap(page_table);
- spin_unlock(&mm->page_table_lock);
- goto out;
+ goto unlock;
}
/* Had to read the page from swap area: Major fault */
@@ -1698,15 +1690,11 @@
lock_page(page);
/*
- * Back out if somebody else faulted in this pte while we
- * released the page table lock.
+ * Back out if somebody else already faulted in this pte.
*/
- spin_lock(&mm->page_table_lock);
- page_table = pte_offset_map(pmd, address);
- if (unlikely(!pte_same(*page_table, orig_pte))) {
- ret = VM_FAULT_MINOR;
+ page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
+ if (unlikely(!pte_same(*page_table, orig_pte)))
goto out_nomap;
- }
if (unlikely(!PageUptodate(page))) {
ret = VM_FAULT_SIGBUS;
@@ -1715,7 +1703,7 @@
/* The page isn't present yet, go ahead with the fault. */
- inc_mm_counter(mm, rss);
+ inc_mm_counter(mm, anon_rss);
pte = mk_pte(page, vma->vm_page_prot);
if (write_access && can_share_swap_page(page)) {
pte = maybe_mkwrite(pte_mkdirty(pte), vma);
@@ -1733,7 +1721,7 @@
if (write_access) {
if (do_wp_page(mm, vma, address,
- page_table, pmd, pte) == VM_FAULT_OOM)
+ page_table, pmd, ptl, pte) == VM_FAULT_OOM)
ret = VM_FAULT_OOM;
goto out;
}
@@ -1741,74 +1729,76 @@
/* No need to invalidate - it was non-present before */
update_mmu_cache(vma, address, pte);
lazy_mmu_prot_update(pte);
- pte_unmap(page_table);
- spin_unlock(&mm->page_table_lock);
+unlock:
+ pte_unmap_unlock(page_table, ptl);
out:
return ret;
out_nomap:
- pte_unmap(page_table);
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(page_table, ptl);
unlock_page(page);
page_cache_release(page);
- goto out;
+ return ret;
}
/*
- * We are called with the MM semaphore and page_table_lock
- * spinlock held to protect against concurrent faults in
- * multithreaded programs.
+ * We enter with non-exclusive mmap_sem (to exclude vma changes,
+ * but allow concurrent faults), and pte mapped but not yet locked.
+ * We return with mmap_sem still held, but pte unmapped and unlocked.
*/
-static int
-do_anonymous_page(struct mm_struct *mm, struct vm_area_struct *vma,
- pte_t *page_table, pmd_t *pmd, int write_access,
- unsigned long addr)
+static int do_anonymous_page(struct mm_struct *mm, struct vm_area_struct *vma,
+ unsigned long address, pte_t *page_table, pmd_t *pmd,
+ int write_access)
{
+ struct page *page;
+ spinlock_t *ptl;
pte_t entry;
- struct page * page = ZERO_PAGE(addr);
- /* Read-only mapping of ZERO_PAGE. */
- entry = pte_wrprotect(mk_pte(ZERO_PAGE(addr), vma->vm_page_prot));
-
- /* ..except if it's a write access */
if (write_access) {
/* Allocate our own private page. */
pte_unmap(page_table);
- spin_unlock(&mm->page_table_lock);
if (unlikely(anon_vma_prepare(vma)))
- goto no_mem;
- page = alloc_zeroed_user_highpage(vma, addr);
+ goto oom;
+ page = alloc_zeroed_user_highpage(vma, address);
if (!page)
- goto no_mem;
+ goto oom;
- spin_lock(&mm->page_table_lock);
- page_table = pte_offset_map(pmd, addr);
+ entry = mk_pte(page, vma->vm_page_prot);
+ entry = maybe_mkwrite(pte_mkdirty(entry), vma);
- if (!pte_none(*page_table)) {
- pte_unmap(page_table);
- page_cache_release(page);
- spin_unlock(&mm->page_table_lock);
- goto out;
- }
- inc_mm_counter(mm, rss);
- entry = maybe_mkwrite(pte_mkdirty(mk_pte(page,
- vma->vm_page_prot)),
- vma);
+ page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
+ if (!pte_none(*page_table))
+ goto release;
+ inc_mm_counter(mm, anon_rss);
lru_cache_add_active(page);
SetPageReferenced(page);
- page_add_anon_rmap(page, vma, addr);
+ page_add_anon_rmap(page, vma, address);
+ } else {
+ /* Map the ZERO_PAGE - vm_page_prot is readonly */
+ page = ZERO_PAGE(address);
+ page_cache_get(page);
+ entry = mk_pte(page, vma->vm_page_prot);
+
+ ptl = pte_lockptr(mm, pmd);
+ spin_lock(ptl);
+ if (!pte_none(*page_table))
+ goto release;
+ inc_mm_counter(mm, file_rss);
+ page_add_file_rmap(page);
}
- set_pte_at(mm, addr, page_table, entry);
- pte_unmap(page_table);
+ set_pte_at(mm, address, page_table, entry);
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, addr, entry);
+ update_mmu_cache(vma, address, entry);
lazy_mmu_prot_update(entry);
- spin_unlock(&mm->page_table_lock);
-out:
+unlock:
+ pte_unmap_unlock(page_table, ptl);
return VM_FAULT_MINOR;
-no_mem:
+release:
+ page_cache_release(page);
+ goto unlock;
+oom:
return VM_FAULT_OOM;
}
@@ -1821,25 +1811,23 @@
* As this is called only for pages that do not currently exist, we
* do not need to flush old virtual caches or the TLB.
*
- * This is called with the MM semaphore held and the page table
- * spinlock held. Exit with the spinlock released.
+ * We enter with non-exclusive mmap_sem (to exclude vma changes,
+ * but allow concurrent faults), and pte mapped but not yet locked.
+ * We return with mmap_sem still held, but pte unmapped and unlocked.
*/
-static int
-do_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
- unsigned long address, int write_access, pte_t *page_table, pmd_t *pmd)
+static int do_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
+ unsigned long address, pte_t *page_table, pmd_t *pmd,
+ int write_access)
{
- struct page * new_page;
+ spinlock_t *ptl;
+ struct page *new_page;
struct address_space *mapping = NULL;
pte_t entry;
unsigned int sequence = 0;
int ret = VM_FAULT_MINOR;
int anon = 0;
- if (!vma->vm_ops || !vma->vm_ops->nopage)
- return do_anonymous_page(mm, vma, page_table,
- pmd, write_access, address);
pte_unmap(page_table);
- spin_unlock(&mm->page_table_lock);
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
@@ -1847,7 +1835,6 @@
smp_rmb(); /* serializes i_size against truncate_count */
}
retry:
- cond_resched();
new_page = vma->vm_ops->nopage(vma, address & PAGE_MASK, &ret);
/*
* No smp_rmb is needed here as long as there's a full
@@ -1880,19 +1867,20 @@
anon = 1;
}
- spin_lock(&mm->page_table_lock);
+ page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
/*
* For a file-backed vma, someone could have truncated or otherwise
* invalidated this page. If unmap_mapping_range got called,
* retry getting the page.
*/
if (mapping && unlikely(sequence != mapping->truncate_count)) {
- sequence = mapping->truncate_count;
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(page_table, ptl);
page_cache_release(new_page);
+ cond_resched();
+ sequence = mapping->truncate_count;
+ smp_rmb();
goto retry;
}
- page_table = pte_offset_map(pmd, address);
/*
* This silly early PAGE_DIRTY setting removes a race
@@ -1906,68 +1894,67 @@
*/
/* Only go through if we didn't race with anybody else... */
if (pte_none(*page_table)) {
- if (!PageReserved(new_page))
- inc_mm_counter(mm, rss);
-
flush_icache_page(vma, new_page);
entry = mk_pte(new_page, vma->vm_page_prot);
if (write_access)
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
set_pte_at(mm, address, page_table, entry);
if (anon) {
+ inc_mm_counter(mm, anon_rss);
lru_cache_add_active(new_page);
page_add_anon_rmap(new_page, vma, address);
- } else
+ } else if (!(vma->vm_flags & VM_RESERVED)) {
+ inc_mm_counter(mm, file_rss);
page_add_file_rmap(new_page);
- pte_unmap(page_table);
+ }
} else {
/* One of our sibling threads was faster, back out. */
- pte_unmap(page_table);
page_cache_release(new_page);
- spin_unlock(&mm->page_table_lock);
- goto out;
+ goto unlock;
}
/* no need to invalidate: a not-present page shouldn't be cached */
update_mmu_cache(vma, address, entry);
lazy_mmu_prot_update(entry);
- spin_unlock(&mm->page_table_lock);
-out:
+unlock:
+ pte_unmap_unlock(page_table, ptl);
return ret;
oom:
page_cache_release(new_page);
- ret = VM_FAULT_OOM;
- goto out;
+ return VM_FAULT_OOM;
}
/*
* Fault of a previously existing named mapping. Repopulate the pte
* from the encoded file_pte if possible. This enables swappable
* nonlinear vmas.
+ *
+ * We enter with non-exclusive mmap_sem (to exclude vma changes,
+ * but allow concurrent faults), and pte mapped but not yet locked.
+ * We return with mmap_sem still held, but pte unmapped and unlocked.
*/
-static int do_file_page(struct mm_struct * mm, struct vm_area_struct * vma,
- unsigned long address, int write_access, pte_t *pte, pmd_t *pmd)
+static int do_file_page(struct mm_struct *mm, struct vm_area_struct *vma,
+ unsigned long address, pte_t *page_table, pmd_t *pmd,
+ int write_access, pte_t orig_pte)
{
- unsigned long pgoff;
+ pgoff_t pgoff;
int err;
- BUG_ON(!vma->vm_ops || !vma->vm_ops->nopage);
- /*
- * Fall back to the linear mapping if the fs does not support
- * ->populate:
- */
- if (!vma->vm_ops->populate ||
- (write_access && !(vma->vm_flags & VM_SHARED))) {
- pte_clear(mm, address, pte);
- return do_no_page(mm, vma, address, write_access, pte, pmd);
+ if (!pte_unmap_same(mm, pmd, page_table, orig_pte))
+ return VM_FAULT_MINOR;
+
+ if (unlikely(!(vma->vm_flags & VM_NONLINEAR))) {
+ /*
+ * Page table corrupted: show pte and kill process.
+ */
+ print_bad_pte(vma, orig_pte, address);
+ return VM_FAULT_OOM;
}
+ /* We can then assume vm->vm_ops && vma->vm_ops->populate */
- pgoff = pte_to_pgoff(*pte);
-
- pte_unmap(pte);
- spin_unlock(&mm->page_table_lock);
-
- err = vma->vm_ops->populate(vma, address & PAGE_MASK, PAGE_SIZE, vma->vm_page_prot, pgoff, 0);
+ pgoff = pte_to_pgoff(orig_pte);
+ err = vma->vm_ops->populate(vma, address & PAGE_MASK, PAGE_SIZE,
+ vma->vm_page_prot, pgoff, 0);
if (err == -ENOMEM)
return VM_FAULT_OOM;
if (err)
@@ -1984,56 +1971,68 @@
* with external mmu caches can use to update those (ie the Sparc or
* PowerPC hashed page tables that act as extended TLBs).
*
- * Note the "page_table_lock". It is to protect against kswapd removing
- * pages from under us. Note that kswapd only ever _removes_ pages, never
- * adds them. As such, once we have noticed that the page is not present,
- * we can drop the lock early.
- *
- * The adding of pages is protected by the MM semaphore (which we hold),
- * so we don't need to worry about a page being suddenly been added into
- * our VM.
- *
- * We enter with the pagetable spinlock held, we are supposed to
- * release it when done.
+ * We enter with non-exclusive mmap_sem (to exclude vma changes,
+ * but allow concurrent faults), and pte mapped but not yet locked.
+ * We return with mmap_sem still held, but pte unmapped and unlocked.
*/
static inline int handle_pte_fault(struct mm_struct *mm,
- struct vm_area_struct * vma, unsigned long address,
- int write_access, pte_t *pte, pmd_t *pmd)
+ struct vm_area_struct *vma, unsigned long address,
+ pte_t *pte, pmd_t *pmd, int write_access)
{
pte_t entry;
+ pte_t old_entry;
+ spinlock_t *ptl;
- entry = *pte;
+ old_entry = entry = *pte;
if (!pte_present(entry)) {
- /*
- * If it truly wasn't present, we know that kswapd
- * and the PTE updates will not touch it later. So
- * drop the lock.
- */
- if (pte_none(entry))
- return do_no_page(mm, vma, address, write_access, pte, pmd);
+ if (pte_none(entry)) {
+ if (!vma->vm_ops || !vma->vm_ops->nopage)
+ return do_anonymous_page(mm, vma, address,
+ pte, pmd, write_access);
+ return do_no_page(mm, vma, address,
+ pte, pmd, write_access);
+ }
if (pte_file(entry))
- return do_file_page(mm, vma, address, write_access, pte, pmd);
- return do_swap_page(mm, vma, address, pte, pmd, entry, write_access);
+ return do_file_page(mm, vma, address,
+ pte, pmd, write_access, entry);
+ return do_swap_page(mm, vma, address,
+ pte, pmd, write_access, entry);
}
+ ptl = pte_lockptr(mm, pmd);
+ spin_lock(ptl);
+ if (unlikely(!pte_same(*pte, entry)))
+ goto unlock;
if (write_access) {
if (!pte_write(entry))
- return do_wp_page(mm, vma, address, pte, pmd, entry);
+ return do_wp_page(mm, vma, address,
+ pte, pmd, ptl, entry);
entry = pte_mkdirty(entry);
}
entry = pte_mkyoung(entry);
- ptep_set_access_flags(vma, address, pte, entry, write_access);
- update_mmu_cache(vma, address, entry);
- lazy_mmu_prot_update(entry);
- pte_unmap(pte);
- spin_unlock(&mm->page_table_lock);
+ if (!pte_same(old_entry, entry)) {
+ ptep_set_access_flags(vma, address, pte, entry, write_access);
+ update_mmu_cache(vma, address, entry);
+ lazy_mmu_prot_update(entry);
+ } else {
+ /*
+ * This is needed only for protection faults but the arch code
+ * is not yet telling us if this is a protection fault or not.
+ * This still avoids useless tlb flushes for .text page faults
+ * with threads.
+ */
+ if (write_access)
+ flush_tlb_page(vma, address);
+ }
+unlock:
+ pte_unmap_unlock(pte, ptl);
return VM_FAULT_MINOR;
}
/*
* By the time we get here, we already hold the mm semaphore
*/
-int __handle_mm_fault(struct mm_struct *mm, struct vm_area_struct * vma,
+int __handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long address, int write_access)
{
pgd_t *pgd;
@@ -2048,100 +2047,66 @@
if (unlikely(is_vm_hugetlb_page(vma)))
return hugetlb_fault(mm, vma, address, write_access);
- /*
- * We need the page table lock to synchronize with kswapd
- * and the SMP-safe atomic PTE updates.
- */
pgd = pgd_offset(mm, address);
- spin_lock(&mm->page_table_lock);
-
pud = pud_alloc(mm, pgd, address);
if (!pud)
- goto oom;
-
+ return VM_FAULT_OOM;
pmd = pmd_alloc(mm, pud, address);
if (!pmd)
- goto oom;
-
+ return VM_FAULT_OOM;
pte = pte_alloc_map(mm, pmd, address);
if (!pte)
- goto oom;
-
- return handle_pte_fault(mm, vma, address, write_access, pte, pmd);
+ return VM_FAULT_OOM;
- oom:
- spin_unlock(&mm->page_table_lock);
- return VM_FAULT_OOM;
+ return handle_pte_fault(mm, vma, address, pte, pmd, write_access);
}
#ifndef __PAGETABLE_PUD_FOLDED
/*
* Allocate page upper directory.
- *
- * We've already handled the fast-path in-line, and we own the
- * page table lock.
+ * We've already handled the fast-path in-line.
*/
-pud_t fastcall *__pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
+int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
{
- pud_t *new;
-
- spin_unlock(&mm->page_table_lock);
- new = pud_alloc_one(mm, address);
- spin_lock(&mm->page_table_lock);
+ pud_t *new = pud_alloc_one(mm, address);
if (!new)
- return NULL;
+ return -ENOMEM;
- /*
- * Because we dropped the lock, we should re-check the
- * entry, as somebody else could have populated it..
- */
- if (pgd_present(*pgd)) {
+ spin_lock(&mm->page_table_lock);
+ if (pgd_present(*pgd)) /* Another has populated it */
pud_free(new);
- goto out;
- }
- pgd_populate(mm, pgd, new);
- out:
- return pud_offset(pgd, address);
+ else
+ pgd_populate(mm, pgd, new);
+ spin_unlock(&mm->page_table_lock);
+ return 0;
}
#endif /* __PAGETABLE_PUD_FOLDED */
#ifndef __PAGETABLE_PMD_FOLDED
/*
* Allocate page middle directory.
- *
- * We've already handled the fast-path in-line, and we own the
- * page table lock.
+ * We've already handled the fast-path in-line.
*/
-pmd_t fastcall *__pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
+int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
{
- pmd_t *new;
-
- spin_unlock(&mm->page_table_lock);
- new = pmd_alloc_one(mm, address);
- spin_lock(&mm->page_table_lock);
+ pmd_t *new = pmd_alloc_one(mm, address);
if (!new)
- return NULL;
+ return -ENOMEM;
- /*
- * Because we dropped the lock, we should re-check the
- * entry, as somebody else could have populated it..
- */
+ spin_lock(&mm->page_table_lock);
#ifndef __ARCH_HAS_4LEVEL_HACK
- if (pud_present(*pud)) {
+ if (pud_present(*pud)) /* Another has populated it */
pmd_free(new);
- goto out;
- }
- pud_populate(mm, pud, new);
+ else
+ pud_populate(mm, pud, new);
#else
- if (pgd_present(*pud)) {
+ if (pgd_present(*pud)) /* Another has populated it */
pmd_free(new);
- goto out;
- }
- pgd_populate(mm, pud, new);
+ else
+ pgd_populate(mm, pud, new);
#endif /* __ARCH_HAS_4LEVEL_HACK */
-
- out:
- return pmd_offset(pud, address);
+ spin_unlock(&mm->page_table_lock);
+ return 0;
}
#endif /* __PAGETABLE_PMD_FOLDED */
@@ -2206,22 +2171,6 @@
EXPORT_SYMBOL(vmalloc_to_pfn);
-/*
- * update_mem_hiwater
- * - update per process rss and vm high water data
- */
-void update_mem_hiwater(struct task_struct *tsk)
-{
- if (tsk->mm) {
- unsigned long rss = get_mm_counter(tsk->mm, rss);
-
- if (tsk->mm->hiwater_rss < rss)
- tsk->mm->hiwater_rss = rss;
- if (tsk->mm->hiwater_vm < tsk->mm->total_vm)
- tsk->mm->hiwater_vm = tsk->mm->total_vm;
- }
-}
-
#if !defined(__HAVE_ARCH_GATE_AREA)
#if defined(AT_SYSINFO_EHDR)
@@ -2233,7 +2182,7 @@
gate_vma.vm_start = FIXADDR_USER_START;
gate_vma.vm_end = FIXADDR_USER_END;
gate_vma.vm_page_prot = PAGE_READONLY;
- gate_vma.vm_flags = 0;
+ gate_vma.vm_flags = VM_RESERVED;
return 0;
}
__initcall(gate_vma_init);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
new file mode 100644
index 0000000..431a64f
--- /dev/null
+++ b/mm/memory_hotplug.c
@@ -0,0 +1,138 @@
+/*
+ * linux/mm/memory_hotplug.c
+ *
+ * Copyright (C)
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/interrupt.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/pagevec.h>
+#include <linux/slab.h>
+#include <linux/sysctl.h>
+#include <linux/cpu.h>
+#include <linux/memory.h>
+#include <linux/memory_hotplug.h>
+#include <linux/highmem.h>
+#include <linux/vmalloc.h>
+
+#include <asm/tlbflush.h>
+
+extern void zonetable_add(struct zone *zone, int nid, int zid, unsigned long pfn,
+ unsigned long size);
+static void __add_zone(struct zone *zone, unsigned long phys_start_pfn)
+{
+ struct pglist_data *pgdat = zone->zone_pgdat;
+ int nr_pages = PAGES_PER_SECTION;
+ int nid = pgdat->node_id;
+ int zone_type;
+
+ zone_type = zone - pgdat->node_zones;
+ memmap_init_zone(nr_pages, nid, zone_type, phys_start_pfn);
+ zonetable_add(zone, nid, zone_type, phys_start_pfn, nr_pages);
+}
+
+extern int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+ int nr_pages);
+static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
+{
+ struct pglist_data *pgdat = zone->zone_pgdat;
+ int nr_pages = PAGES_PER_SECTION;
+ int ret;
+
+ ret = sparse_add_one_section(zone, phys_start_pfn, nr_pages);
+
+ if (ret < 0)
+ return ret;
+
+ __add_zone(zone, phys_start_pfn);
+ return register_new_memory(__pfn_to_section(phys_start_pfn));
+}
+
+/*
+ * Reasonably generic function for adding memory. It is
+ * expected that archs that support memory hotplug will
+ * call this function after deciding the zone to which to
+ * add the new pages.
+ */
+int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
+ unsigned long nr_pages)
+{
+ unsigned long i;
+ int err = 0;
+
+ for (i = 0; i < nr_pages; i += PAGES_PER_SECTION) {
+ err = __add_section(zone, phys_start_pfn + i);
+
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
+static void grow_zone_span(struct zone *zone,
+ unsigned long start_pfn, unsigned long end_pfn)
+{
+ unsigned long old_zone_end_pfn;
+
+ zone_span_writelock(zone);
+
+ old_zone_end_pfn = zone->zone_start_pfn + zone->spanned_pages;
+ if (start_pfn < zone->zone_start_pfn)
+ zone->zone_start_pfn = start_pfn;
+
+ if (end_pfn > old_zone_end_pfn)
+ zone->spanned_pages = end_pfn - zone->zone_start_pfn;
+
+ zone_span_writeunlock(zone);
+}
+
+static void grow_pgdat_span(struct pglist_data *pgdat,
+ unsigned long start_pfn, unsigned long end_pfn)
+{
+ unsigned long old_pgdat_end_pfn =
+ pgdat->node_start_pfn + pgdat->node_spanned_pages;
+
+ if (start_pfn < pgdat->node_start_pfn)
+ pgdat->node_start_pfn = start_pfn;
+
+ if (end_pfn > old_pgdat_end_pfn)
+ pgdat->node_spanned_pages = end_pfn - pgdat->node_spanned_pages;
+}
+
+int online_pages(unsigned long pfn, unsigned long nr_pages)
+{
+ unsigned long i;
+ unsigned long flags;
+ unsigned long onlined_pages = 0;
+ struct zone *zone;
+
+ /*
+ * This doesn't need a lock to do pfn_to_page().
+ * The section can't be removed here because of the
+ * memory_block->state_sem.
+ */
+ zone = page_zone(pfn_to_page(pfn));
+ pgdat_resize_lock(zone->zone_pgdat, &flags);
+ grow_zone_span(zone, pfn, pfn + nr_pages);
+ grow_pgdat_span(zone->zone_pgdat, pfn, pfn + nr_pages);
+ pgdat_resize_unlock(zone->zone_pgdat, &flags);
+
+ for (i = 0; i < nr_pages; i++) {
+ struct page *page = pfn_to_page(pfn + i);
+ online_page(page);
+ onlined_pages++;
+ }
+ zone->present_pages += onlined_pages;
+
+ setup_per_zone_pages_min();
+
+ return 0;
+}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 37af443..5abc57c 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2,6 +2,7 @@
* Simple NUMA memory policy for the Linux kernel.
*
* Copyright 2003,2004 Andi Kleen, SuSE Labs.
+ * (C) Copyright 2005 Christoph Lameter, Silicon Graphics, Inc.
* Subject to the GNU Public License, version 2.
*
* NUMA policy allows the user to give hints in which node(s) memory should
@@ -17,13 +18,19 @@
* offset into the backing object or offset into the mapping
* for anonymous memory. For process policy an process counter
* is used.
+ *
* bind Only allocate memory on a specific set of nodes,
* no fallback.
+ * FIXME: memory is allocated starting with the first node
+ * to the last. It would be better if bind would truly restrict
+ * the allocation to memory nodes instead
+ *
* preferred Try a specific node first before normal fallback.
* As a special case node -1 here means do the allocation
* on the local CPU. This is normally identical to default,
* but useful to set in a VMA when you have a non default
* process policy.
+ *
* default Allocate on the local node first, or when on a VMA
* use the process policy. This is what Linux always did
* in a NUMA aware kernel and still does by, ahem, default.
@@ -93,23 +100,10 @@
.policy = MPOL_DEFAULT,
};
-/* Check if all specified nodes are online */
-static int nodes_online(unsigned long *nodes)
-{
- DECLARE_BITMAP(online2, MAX_NUMNODES);
-
- bitmap_copy(online2, nodes_addr(node_online_map), MAX_NUMNODES);
- if (bitmap_empty(online2, MAX_NUMNODES))
- set_bit(0, online2);
- if (!bitmap_subset(nodes, online2, MAX_NUMNODES))
- return -EINVAL;
- return 0;
-}
-
/* Do sanity checking on a policy */
-static int mpol_check_policy(int mode, unsigned long *nodes)
+static int mpol_check_policy(int mode, nodemask_t *nodes)
{
- int empty = bitmap_empty(nodes, MAX_NUMNODES);
+ int empty = nodes_empty(*nodes);
switch (mode) {
case MPOL_DEFAULT:
@@ -124,71 +118,20 @@
return -EINVAL;
break;
}
- return nodes_online(nodes);
+ return nodes_subset(*nodes, node_online_map) ? 0 : -EINVAL;
}
-
-/* Copy a node mask from user space. */
-static int get_nodes(unsigned long *nodes, unsigned long __user *nmask,
- unsigned long maxnode, int mode)
-{
- unsigned long k;
- unsigned long nlongs;
- unsigned long endmask;
-
- --maxnode;
- bitmap_zero(nodes, MAX_NUMNODES);
- if (maxnode == 0 || !nmask)
- return 0;
-
- nlongs = BITS_TO_LONGS(maxnode);
- if ((maxnode % BITS_PER_LONG) == 0)
- endmask = ~0UL;
- else
- endmask = (1UL << (maxnode % BITS_PER_LONG)) - 1;
-
- /* When the user specified more nodes than supported just check
- if the non supported part is all zero. */
- if (nlongs > BITS_TO_LONGS(MAX_NUMNODES)) {
- if (nlongs > PAGE_SIZE/sizeof(long))
- return -EINVAL;
- for (k = BITS_TO_LONGS(MAX_NUMNODES); k < nlongs; k++) {
- unsigned long t;
- if (get_user(t, nmask + k))
- return -EFAULT;
- if (k == nlongs - 1) {
- if (t & endmask)
- return -EINVAL;
- } else if (t)
- return -EINVAL;
- }
- nlongs = BITS_TO_LONGS(MAX_NUMNODES);
- endmask = ~0UL;
- }
-
- if (copy_from_user(nodes, nmask, nlongs*sizeof(unsigned long)))
- return -EFAULT;
- nodes[nlongs-1] &= endmask;
- /* Update current mems_allowed */
- cpuset_update_current_mems_allowed();
- /* Ignore nodes not set in current->mems_allowed */
- cpuset_restrict_to_mems_allowed(nodes);
- return mpol_check_policy(mode, nodes);
-}
-
/* Generate a custom zonelist for the BIND policy. */
-static struct zonelist *bind_zonelist(unsigned long *nodes)
+static struct zonelist *bind_zonelist(nodemask_t *nodes)
{
struct zonelist *zl;
int num, max, nd;
- max = 1 + MAX_NR_ZONES * bitmap_weight(nodes, MAX_NUMNODES);
+ max = 1 + MAX_NR_ZONES * nodes_weight(*nodes);
zl = kmalloc(sizeof(void *) * max, GFP_KERNEL);
if (!zl)
return NULL;
num = 0;
- for (nd = find_first_bit(nodes, MAX_NUMNODES);
- nd < MAX_NUMNODES;
- nd = find_next_bit(nodes, MAX_NUMNODES, 1+nd)) {
+ for_each_node_mask(nd, *nodes) {
int k;
for (k = MAX_NR_ZONES-1; k >= 0; k--) {
struct zone *z = &NODE_DATA(nd)->node_zones[k];
@@ -199,17 +142,16 @@
policy_zone = k;
}
}
- BUG_ON(num >= max);
zl->zones[num] = NULL;
return zl;
}
/* Create a new policy */
-static struct mempolicy *mpol_new(int mode, unsigned long *nodes)
+static struct mempolicy *mpol_new(int mode, nodemask_t *nodes)
{
struct mempolicy *policy;
- PDprintk("setting mode %d nodes[0] %lx\n", mode, nodes[0]);
+ PDprintk("setting mode %d nodes[0] %lx\n", mode, nodes_addr(*nodes)[0]);
if (mode == MPOL_DEFAULT)
return NULL;
policy = kmem_cache_alloc(policy_cache, GFP_KERNEL);
@@ -218,10 +160,10 @@
atomic_set(&policy->refcnt, 1);
switch (mode) {
case MPOL_INTERLEAVE:
- bitmap_copy(policy->v.nodes, nodes, MAX_NUMNODES);
+ policy->v.nodes = *nodes;
break;
case MPOL_PREFERRED:
- policy->v.preferred_node = find_first_bit(nodes, MAX_NUMNODES);
+ policy->v.preferred_node = first_node(*nodes);
if (policy->v.preferred_node >= MAX_NUMNODES)
policy->v.preferred_node = -1;
break;
@@ -238,14 +180,14 @@
}
/* Ensure all existing pages follow the policy. */
-static int check_pte_range(struct mm_struct *mm, pmd_t *pmd,
- unsigned long addr, unsigned long end, unsigned long *nodes)
+static int check_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
+ unsigned long addr, unsigned long end, nodemask_t *nodes)
{
pte_t *orig_pte;
pte_t *pte;
+ spinlock_t *ptl;
- spin_lock(&mm->page_table_lock);
- orig_pte = pte = pte_offset_map(pmd, addr);
+ orig_pte = pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
do {
unsigned long pfn;
unsigned int nid;
@@ -253,19 +195,20 @@
if (!pte_present(*pte))
continue;
pfn = pte_pfn(*pte);
- if (!pfn_valid(pfn))
+ if (!pfn_valid(pfn)) {
+ print_bad_pte(vma, *pte, addr);
continue;
+ }
nid = pfn_to_nid(pfn);
- if (!test_bit(nid, nodes))
+ if (!node_isset(nid, *nodes))
break;
} while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap(orig_pte);
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(orig_pte, ptl);
return addr != end;
}
-static inline int check_pmd_range(struct mm_struct *mm, pud_t *pud,
- unsigned long addr, unsigned long end, unsigned long *nodes)
+static inline int check_pmd_range(struct vm_area_struct *vma, pud_t *pud,
+ unsigned long addr, unsigned long end, nodemask_t *nodes)
{
pmd_t *pmd;
unsigned long next;
@@ -275,14 +218,14 @@
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
- if (check_pte_range(mm, pmd, addr, next, nodes))
+ if (check_pte_range(vma, pmd, addr, next, nodes))
return -EIO;
} while (pmd++, addr = next, addr != end);
return 0;
}
-static inline int check_pud_range(struct mm_struct *mm, pgd_t *pgd,
- unsigned long addr, unsigned long end, unsigned long *nodes)
+static inline int check_pud_range(struct vm_area_struct *vma, pgd_t *pgd,
+ unsigned long addr, unsigned long end, nodemask_t *nodes)
{
pud_t *pud;
unsigned long next;
@@ -292,24 +235,24 @@
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud))
continue;
- if (check_pmd_range(mm, pud, addr, next, nodes))
+ if (check_pmd_range(vma, pud, addr, next, nodes))
return -EIO;
} while (pud++, addr = next, addr != end);
return 0;
}
-static inline int check_pgd_range(struct mm_struct *mm,
- unsigned long addr, unsigned long end, unsigned long *nodes)
+static inline int check_pgd_range(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long end, nodemask_t *nodes)
{
pgd_t *pgd;
unsigned long next;
- pgd = pgd_offset(mm, addr);
+ pgd = pgd_offset(vma->vm_mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
- if (check_pud_range(mm, pgd, addr, next, nodes))
+ if (check_pud_range(vma, pgd, addr, next, nodes))
return -EIO;
} while (pgd++, addr = next, addr != end);
return 0;
@@ -318,7 +261,7 @@
/* Step 1: check the range */
static struct vm_area_struct *
check_range(struct mm_struct *mm, unsigned long start, unsigned long end,
- unsigned long *nodes, unsigned long flags)
+ nodemask_t *nodes, unsigned long flags)
{
int err;
struct vm_area_struct *first, *vma, *prev;
@@ -326,6 +269,8 @@
first = find_vma(mm, start);
if (!first)
return ERR_PTR(-EFAULT);
+ if (first->vm_flags & VM_RESERVED)
+ return ERR_PTR(-EACCES);
prev = NULL;
for (vma = first; vma && vma->vm_start < end; vma = vma->vm_next) {
if (!vma->vm_next && vma->vm_end < end)
@@ -338,8 +283,7 @@
endvma = end;
if (vma->vm_start > start)
start = vma->vm_start;
- err = check_pgd_range(vma->vm_mm,
- start, endvma, nodes);
+ err = check_pgd_range(vma, start, endvma, nodes);
if (err) {
first = ERR_PTR(err);
break;
@@ -393,17 +337,25 @@
return err;
}
-/* Change policy for a memory range */
-asmlinkage long sys_mbind(unsigned long start, unsigned long len,
- unsigned long mode,
- unsigned long __user *nmask, unsigned long maxnode,
- unsigned flags)
+static int contextualize_policy(int mode, nodemask_t *nodes)
+{
+ if (!nodes)
+ return 0;
+
+ /* Update current mems_allowed */
+ cpuset_update_current_mems_allowed();
+ /* Ignore nodes not set in current->mems_allowed */
+ cpuset_restrict_to_mems_allowed(nodes->bits);
+ return mpol_check_policy(mode, nodes);
+}
+
+long do_mbind(unsigned long start, unsigned long len,
+ unsigned long mode, nodemask_t *nmask, unsigned long flags)
{
struct vm_area_struct *vma;
struct mm_struct *mm = current->mm;
struct mempolicy *new;
unsigned long end;
- DECLARE_BITMAP(nodes, MAX_NUMNODES);
int err;
if ((flags & ~(unsigned long)(MPOL_MF_STRICT)) || mode > MPOL_MAX)
@@ -418,20 +370,17 @@
return -EINVAL;
if (end == start)
return 0;
-
- err = get_nodes(nodes, nmask, maxnode, mode);
- if (err)
- return err;
-
- new = mpol_new(mode, nodes);
+ if (mpol_check_policy(mode, nmask))
+ return -EINVAL;
+ new = mpol_new(mode, nmask);
if (IS_ERR(new))
return PTR_ERR(new);
PDprintk("mbind %lx-%lx mode:%ld nodes:%lx\n",start,start+len,
- mode,nodes[0]);
+ mode,nodes_addr(nodes)[0]);
down_write(&mm->mmap_sem);
- vma = check_range(mm, start, end, nodes, flags);
+ vma = check_range(mm, start, end, nmask, flags);
err = PTR_ERR(vma);
if (!IS_ERR(vma))
err = mbind_range(vma, start, end, new);
@@ -441,50 +390,45 @@
}
/* Set the process memory policy */
-asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
- unsigned long maxnode)
+long do_set_mempolicy(int mode, nodemask_t *nodes)
{
- int err;
struct mempolicy *new;
- DECLARE_BITMAP(nodes, MAX_NUMNODES);
- if (mode < 0 || mode > MPOL_MAX)
+ if (contextualize_policy(mode, nodes))
return -EINVAL;
- err = get_nodes(nodes, nmask, maxnode, mode);
- if (err)
- return err;
new = mpol_new(mode, nodes);
if (IS_ERR(new))
return PTR_ERR(new);
mpol_free(current->mempolicy);
current->mempolicy = new;
if (new && new->policy == MPOL_INTERLEAVE)
- current->il_next = find_first_bit(new->v.nodes, MAX_NUMNODES);
+ current->il_next = first_node(new->v.nodes);
return 0;
}
/* Fill a zone bitmap for a policy */
-static void get_zonemask(struct mempolicy *p, unsigned long *nodes)
+static void get_zonemask(struct mempolicy *p, nodemask_t *nodes)
{
int i;
- bitmap_zero(nodes, MAX_NUMNODES);
+ nodes_clear(*nodes);
switch (p->policy) {
case MPOL_BIND:
for (i = 0; p->v.zonelist->zones[i]; i++)
- __set_bit(p->v.zonelist->zones[i]->zone_pgdat->node_id, nodes);
+ node_set(p->v.zonelist->zones[i]->zone_pgdat->node_id,
+ *nodes);
break;
case MPOL_DEFAULT:
break;
case MPOL_INTERLEAVE:
- bitmap_copy(nodes, p->v.nodes, MAX_NUMNODES);
+ *nodes = p->v.nodes;
break;
case MPOL_PREFERRED:
/* or use current node instead of online map? */
if (p->v.preferred_node < 0)
- bitmap_copy(nodes, nodes_addr(node_online_map), MAX_NUMNODES);
+ *nodes = node_online_map;
else
- __set_bit(p->v.preferred_node, nodes);
+ node_set(p->v.preferred_node, *nodes);
break;
default:
BUG();
@@ -504,37 +448,18 @@
return err;
}
-/* Copy a kernel node mask to user space */
-static int copy_nodes_to_user(unsigned long __user *mask, unsigned long maxnode,
- void *nodes, unsigned nbytes)
-{
- unsigned long copy = ALIGN(maxnode-1, 64) / 8;
-
- if (copy > nbytes) {
- if (copy > PAGE_SIZE)
- return -EINVAL;
- if (clear_user((char __user *)mask + nbytes, copy - nbytes))
- return -EFAULT;
- copy = nbytes;
- }
- return copy_to_user(mask, nodes, copy) ? -EFAULT : 0;
-}
-
/* Retrieve NUMA policy */
-asmlinkage long sys_get_mempolicy(int __user *policy,
- unsigned long __user *nmask,
- unsigned long maxnode,
- unsigned long addr, unsigned long flags)
+long do_get_mempolicy(int *policy, nodemask_t *nmask,
+ unsigned long addr, unsigned long flags)
{
- int err, pval;
+ int err;
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma = NULL;
struct mempolicy *pol = current->mempolicy;
+ cpuset_update_current_mems_allowed();
if (flags & ~(unsigned long)(MPOL_F_NODE|MPOL_F_ADDR))
return -EINVAL;
- if (nmask != NULL && maxnode < MAX_NUMNODES)
- return -EINVAL;
if (flags & MPOL_F_ADDR) {
down_read(&mm->mmap_sem);
vma = find_vma_intersection(mm, addr, addr+1);
@@ -557,31 +482,25 @@
err = lookup_node(mm, addr);
if (err < 0)
goto out;
- pval = err;
+ *policy = err;
} else if (pol == current->mempolicy &&
pol->policy == MPOL_INTERLEAVE) {
- pval = current->il_next;
+ *policy = current->il_next;
} else {
err = -EINVAL;
goto out;
}
} else
- pval = pol->policy;
+ *policy = pol->policy;
if (vma) {
up_read(¤t->mm->mmap_sem);
vma = NULL;
}
- if (policy && put_user(pval, policy))
- return -EFAULT;
-
err = 0;
- if (nmask) {
- DECLARE_BITMAP(nodes, MAX_NUMNODES);
- get_zonemask(pol, nodes);
- err = copy_nodes_to_user(nmask, maxnode, nodes, sizeof(nodes));
- }
+ if (nmask)
+ get_zonemask(pol, nmask);
out:
if (vma)
@@ -589,6 +508,126 @@
return err;
}
+/*
+ * User space interface with variable sized bitmaps for nodelists.
+ */
+
+/* Copy a node mask from user space. */
+static int get_nodes(nodemask_t *nodes, unsigned long __user *nmask,
+ unsigned long maxnode)
+{
+ unsigned long k;
+ unsigned long nlongs;
+ unsigned long endmask;
+
+ --maxnode;
+ nodes_clear(*nodes);
+ if (maxnode == 0 || !nmask)
+ return 0;
+
+ nlongs = BITS_TO_LONGS(maxnode);
+ if ((maxnode % BITS_PER_LONG) == 0)
+ endmask = ~0UL;
+ else
+ endmask = (1UL << (maxnode % BITS_PER_LONG)) - 1;
+
+ /* When the user specified more nodes than supported just check
+ if the non supported part is all zero. */
+ if (nlongs > BITS_TO_LONGS(MAX_NUMNODES)) {
+ if (nlongs > PAGE_SIZE/sizeof(long))
+ return -EINVAL;
+ for (k = BITS_TO_LONGS(MAX_NUMNODES); k < nlongs; k++) {
+ unsigned long t;
+ if (get_user(t, nmask + k))
+ return -EFAULT;
+ if (k == nlongs - 1) {
+ if (t & endmask)
+ return -EINVAL;
+ } else if (t)
+ return -EINVAL;
+ }
+ nlongs = BITS_TO_LONGS(MAX_NUMNODES);
+ endmask = ~0UL;
+ }
+
+ if (copy_from_user(nodes_addr(*nodes), nmask, nlongs*sizeof(unsigned long)))
+ return -EFAULT;
+ nodes_addr(*nodes)[nlongs-1] &= endmask;
+ return 0;
+}
+
+/* Copy a kernel node mask to user space */
+static int copy_nodes_to_user(unsigned long __user *mask, unsigned long maxnode,
+ nodemask_t *nodes)
+{
+ unsigned long copy = ALIGN(maxnode-1, 64) / 8;
+ const int nbytes = BITS_TO_LONGS(MAX_NUMNODES) * sizeof(long);
+
+ if (copy > nbytes) {
+ if (copy > PAGE_SIZE)
+ return -EINVAL;
+ if (clear_user((char __user *)mask + nbytes, copy - nbytes))
+ return -EFAULT;
+ copy = nbytes;
+ }
+ return copy_to_user(mask, nodes_addr(*nodes), copy) ? -EFAULT : 0;
+}
+
+asmlinkage long sys_mbind(unsigned long start, unsigned long len,
+ unsigned long mode,
+ unsigned long __user *nmask, unsigned long maxnode,
+ unsigned flags)
+{
+ nodemask_t nodes;
+ int err;
+
+ err = get_nodes(&nodes, nmask, maxnode);
+ if (err)
+ return err;
+ return do_mbind(start, len, mode, &nodes, flags);
+}
+
+/* Set the process memory policy */
+asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
+ unsigned long maxnode)
+{
+ int err;
+ nodemask_t nodes;
+
+ if (mode < 0 || mode > MPOL_MAX)
+ return -EINVAL;
+ err = get_nodes(&nodes, nmask, maxnode);
+ if (err)
+ return err;
+ return do_set_mempolicy(mode, &nodes);
+}
+
+/* Retrieve NUMA policy */
+asmlinkage long sys_get_mempolicy(int __user *policy,
+ unsigned long __user *nmask,
+ unsigned long maxnode,
+ unsigned long addr, unsigned long flags)
+{
+ int err, pval;
+ nodemask_t nodes;
+
+ if (nmask != NULL && maxnode < MAX_NUMNODES)
+ return -EINVAL;
+
+ err = do_get_mempolicy(&pval, &nodes, addr, flags);
+
+ if (err)
+ return err;
+
+ if (policy && put_user(pval, policy))
+ return -EFAULT;
+
+ if (nmask)
+ err = copy_nodes_to_user(nmask, maxnode, &nodes);
+
+ return err;
+}
+
#ifdef CONFIG_COMPAT
asmlinkage long compat_sys_get_mempolicy(int __user *policy,
@@ -649,15 +688,15 @@
long err = 0;
unsigned long __user *nm = NULL;
unsigned long nr_bits, alloc_size;
- DECLARE_BITMAP(bm, MAX_NUMNODES);
+ nodemask_t bm;
nr_bits = min_t(unsigned long, maxnode-1, MAX_NUMNODES);
alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
if (nmask) {
- err = compat_get_bitmap(bm, nmask, nr_bits);
+ err = compat_get_bitmap(nodes_addr(bm), nmask, nr_bits);
nm = compat_alloc_user_space(alloc_size);
- err |= copy_to_user(nm, bm, alloc_size);
+ err |= copy_to_user(nm, nodes_addr(bm), alloc_size);
}
if (err)
@@ -676,7 +715,7 @@
if (vma) {
if (vma->vm_ops && vma->vm_ops->get_policy)
- pol = vma->vm_ops->get_policy(vma, addr);
+ pol = vma->vm_ops->get_policy(vma, addr);
else if (vma->vm_policy &&
vma->vm_policy->policy != MPOL_DEFAULT)
pol = vma->vm_policy;
@@ -700,7 +739,7 @@
case MPOL_BIND:
/* Lower zones don't get a policy applied */
/* Careful: current->mems_allowed might have moved */
- if ((gfp & GFP_ZONEMASK) >= policy_zone)
+ if (gfp_zone(gfp) >= policy_zone)
if (cpuset_zonelist_valid_mems_allowed(policy->v.zonelist))
return policy->v.zonelist;
/*FALL THROUGH*/
@@ -712,7 +751,7 @@
nd = 0;
BUG();
}
- return NODE_DATA(nd)->node_zonelists + (gfp & GFP_ZONEMASK);
+ return NODE_DATA(nd)->node_zonelists + gfp_zone(gfp);
}
/* Do dynamic interleaving for a process */
@@ -722,10 +761,9 @@
struct task_struct *me = current;
nid = me->il_next;
- BUG_ON(nid >= MAX_NUMNODES);
- next = find_next_bit(policy->v.nodes, MAX_NUMNODES, 1+nid);
+ next = next_node(nid, policy->v.nodes);
if (next >= MAX_NUMNODES)
- next = find_first_bit(policy->v.nodes, MAX_NUMNODES);
+ next = first_node(policy->v.nodes);
me->il_next = next;
return nid;
}
@@ -734,30 +772,28 @@
static unsigned offset_il_node(struct mempolicy *pol,
struct vm_area_struct *vma, unsigned long off)
{
- unsigned nnodes = bitmap_weight(pol->v.nodes, MAX_NUMNODES);
+ unsigned nnodes = nodes_weight(pol->v.nodes);
unsigned target = (unsigned)off % nnodes;
int c;
int nid = -1;
c = 0;
do {
- nid = find_next_bit(pol->v.nodes, MAX_NUMNODES, nid+1);
+ nid = next_node(nid, pol->v.nodes);
c++;
} while (c <= target);
- BUG_ON(nid >= MAX_NUMNODES);
- BUG_ON(!test_bit(nid, pol->v.nodes));
return nid;
}
/* Allocate a page in interleaved policy.
Own path because it needs to do special accounting. */
-static struct page *alloc_page_interleave(gfp_t gfp, unsigned order, unsigned nid)
+static struct page *alloc_page_interleave(gfp_t gfp, unsigned order,
+ unsigned nid)
{
struct zonelist *zl;
struct page *page;
- BUG_ON(!node_online(nid));
- zl = NODE_DATA(nid)->node_zonelists + (gfp & GFP_ZONEMASK);
+ zl = NODE_DATA(nid)->node_zonelists + gfp_zone(gfp);
page = __alloc_pages(gfp, order, zl);
if (page && page_zone(page) == zl->zones[0]) {
zone_pcp(zl->zones[0],get_cpu())->interleave_hit++;
@@ -799,8 +835,6 @@
unsigned nid;
if (vma) {
unsigned long off;
- BUG_ON(addr >= vma->vm_end);
- BUG_ON(addr < vma->vm_start);
off = vma->vm_pgoff;
off += (addr - vma->vm_start) >> PAGE_SHIFT;
nid = offset_il_node(pol, vma, off);
@@ -878,7 +912,7 @@
case MPOL_DEFAULT:
return 1;
case MPOL_INTERLEAVE:
- return bitmap_equal(a->v.nodes, b->v.nodes, MAX_NUMNODES);
+ return nodes_equal(a->v.nodes, b->v.nodes);
case MPOL_PREFERRED:
return a->v.preferred_node == b->v.preferred_node;
case MPOL_BIND: {
@@ -1117,7 +1151,7 @@
PDprintk("set_shared_policy %lx sz %lu %d %lx\n",
vma->vm_pgoff,
sz, npol? npol->policy : -1,
- npol ? npol->v.nodes[0] : -1);
+ npol ? nodes_addr(npol->v.nodes)[0] : -1);
if (npol) {
new = sp_alloc(vma->vm_pgoff, vma->vm_pgoff + sz, npol);
@@ -1164,14 +1198,75 @@
/* Set interleaving policy for system init. This way not all
the data structures allocated at system boot end up in node zero. */
- if (sys_set_mempolicy(MPOL_INTERLEAVE, nodes_addr(node_online_map),
- MAX_NUMNODES) < 0)
+ if (do_set_mempolicy(MPOL_INTERLEAVE, &node_online_map))
printk("numa_policy_init: interleaving failed\n");
}
-/* Reset policy of current process to default.
- * Assumes fs == KERNEL_DS */
+/* Reset policy of current process to default */
void numa_default_policy(void)
{
- sys_set_mempolicy(MPOL_DEFAULT, NULL, 0);
+ do_set_mempolicy(MPOL_DEFAULT, NULL);
+}
+
+/* Migrate a policy to a different set of nodes */
+static void rebind_policy(struct mempolicy *pol, const nodemask_t *old,
+ const nodemask_t *new)
+{
+ nodemask_t tmp;
+
+ if (!pol)
+ return;
+
+ switch (pol->policy) {
+ case MPOL_DEFAULT:
+ break;
+ case MPOL_INTERLEAVE:
+ nodes_remap(tmp, pol->v.nodes, *old, *new);
+ pol->v.nodes = tmp;
+ current->il_next = node_remap(current->il_next, *old, *new);
+ break;
+ case MPOL_PREFERRED:
+ pol->v.preferred_node = node_remap(pol->v.preferred_node,
+ *old, *new);
+ break;
+ case MPOL_BIND: {
+ nodemask_t nodes;
+ struct zone **z;
+ struct zonelist *zonelist;
+
+ nodes_clear(nodes);
+ for (z = pol->v.zonelist->zones; *z; z++)
+ node_set((*z)->zone_pgdat->node_id, nodes);
+ nodes_remap(tmp, nodes, *old, *new);
+ nodes = tmp;
+
+ zonelist = bind_zonelist(&nodes);
+
+ /* If no mem, then zonelist is NULL and we keep old zonelist.
+ * If that old zonelist has no remaining mems_allowed nodes,
+ * then zonelist_policy() will "FALL THROUGH" to MPOL_DEFAULT.
+ */
+
+ if (zonelist) {
+ /* Good - got mem - substitute new zonelist */
+ kfree(pol->v.zonelist);
+ pol->v.zonelist = zonelist;
+ }
+ break;
+ }
+ default:
+ BUG();
+ break;
+ }
+}
+
+/*
+ * Someone moved this task to different nodes. Fixup mempolicies.
+ *
+ * TODO - fixup current->mm->vma and shmfs/tmpfs/hugetlbfs policies as well,
+ * once we have a cpuset mechanism to mark which cpuset subtree is migrating.
+ */
+void numa_policy_rebind(const nodemask_t *old, const nodemask_t *new)
+{
+ rebind_policy(current->mempolicy, old, new);
}
diff --git a/mm/mempool.c b/mm/mempool.c
index 9e377ea..1a99b80 100644
--- a/mm/mempool.c
+++ b/mm/mempool.c
@@ -205,7 +205,7 @@
void *element;
unsigned long flags;
wait_queue_t wait;
- unsigned int gfp_temp;
+ gfp_t gfp_temp;
might_sleep_if(gfp_mask & __GFP_WAIT);
diff --git a/mm/mmap.c b/mm/mmap.c
index fa11d91..320dda1 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -181,26 +181,36 @@
}
/*
- * Remove one vm structure and free it.
+ * Unlink a file-based vm structure from its prio_tree, to hide
+ * vma from rmap and vmtruncate before freeing its page tables.
*/
-static void remove_vm_struct(struct vm_area_struct *vma)
+void unlink_file_vma(struct vm_area_struct *vma)
{
struct file *file = vma->vm_file;
- might_sleep();
if (file) {
struct address_space *mapping = file->f_mapping;
spin_lock(&mapping->i_mmap_lock);
__remove_shared_vm_struct(vma, file, mapping);
spin_unlock(&mapping->i_mmap_lock);
}
+}
+
+/*
+ * Close a vm structure and free it, returning the next.
+ */
+static struct vm_area_struct *remove_vma(struct vm_area_struct *vma)
+{
+ struct vm_area_struct *next = vma->vm_next;
+
+ might_sleep();
if (vma->vm_ops && vma->vm_ops->close)
vma->vm_ops->close(vma);
- if (file)
- fput(file);
- anon_vma_unlink(vma);
+ if (vma->vm_file)
+ fput(vma->vm_file);
mpol_free(vma_policy(vma));
kmem_cache_free(vm_area_cachep, vma);
+ return next;
}
asmlinkage unsigned long sys_brk(unsigned long brk)
@@ -832,7 +842,7 @@
}
#ifdef CONFIG_PROC_FS
-void __vm_stat_account(struct mm_struct *mm, unsigned long flags,
+void vm_stat_account(struct mm_struct *mm, unsigned long flags,
struct file *file, long pages)
{
const unsigned long stack_flags
@@ -1070,6 +1080,17 @@
error = file->f_op->mmap(file, vma);
if (error)
goto unmap_and_free_vma;
+ if ((vma->vm_flags & (VM_SHARED | VM_WRITE | VM_RESERVED))
+ == (VM_WRITE | VM_RESERVED)) {
+ printk(KERN_WARNING "program %s is using MAP_PRIVATE, "
+ "PROT_WRITE mmap of VM_RESERVED memory, which "
+ "is deprecated. Please report this to "
+ "linux-kernel@vger.kernel.org\n",current->comm);
+ if (vma->vm_ops && vma->vm_ops->close)
+ vma->vm_ops->close(vma);
+ error = -EACCES;
+ goto unmap_and_free_vma;
+ }
} else if (vm_flags & VM_SHARED) {
error = shmem_zero_setup(vma);
if (error)
@@ -1110,7 +1131,7 @@
}
out:
mm->total_vm += len >> PAGE_SHIFT;
- __vm_stat_account(mm, vm_flags, file, len >> PAGE_SHIFT);
+ vm_stat_account(mm, vm_flags, file, len >> PAGE_SHIFT);
if (vm_flags & VM_LOCKED) {
mm->locked_vm += len >> PAGE_SHIFT;
make_pages_present(addr, addr + len);
@@ -1475,15 +1496,19 @@
mm->total_vm += grow;
if (vma->vm_flags & VM_LOCKED)
mm->locked_vm += grow;
- __vm_stat_account(mm, vma->vm_flags, vma->vm_file, grow);
+ vm_stat_account(mm, vma->vm_flags, vma->vm_file, grow);
return 0;
}
-#ifdef CONFIG_STACK_GROWSUP
+#if defined(CONFIG_STACK_GROWSUP) || defined(CONFIG_IA64)
/*
- * vma is the first one with address > vma->vm_end. Have to extend vma.
+ * PA-RISC uses this for its stack; IA64 for its Register Backing Store.
+ * vma is the last one with address > vma->vm_end. Have to extend vma.
*/
-int expand_stack(struct vm_area_struct * vma, unsigned long address)
+#ifdef CONFIG_STACK_GROWSUP
+static inline
+#endif
+int expand_upwards(struct vm_area_struct *vma, unsigned long address)
{
int error;
@@ -1521,6 +1546,13 @@
anon_vma_unlock(vma);
return error;
}
+#endif /* CONFIG_STACK_GROWSUP || CONFIG_IA64 */
+
+#ifdef CONFIG_STACK_GROWSUP
+int expand_stack(struct vm_area_struct *vma, unsigned long address)
+{
+ return expand_upwards(vma, address);
+}
struct vm_area_struct *
find_extend_vma(struct mm_struct *mm, unsigned long addr)
@@ -1603,36 +1635,24 @@
}
#endif
-/* Normal function to fix up a mapping
- * This function is the default for when an area has no specific
- * function. This may be used as part of a more specific routine.
- *
- * By the time this function is called, the area struct has been
- * removed from the process mapping list.
- */
-static void unmap_vma(struct mm_struct *mm, struct vm_area_struct *area)
-{
- size_t len = area->vm_end - area->vm_start;
-
- area->vm_mm->total_vm -= len >> PAGE_SHIFT;
- if (area->vm_flags & VM_LOCKED)
- area->vm_mm->locked_vm -= len >> PAGE_SHIFT;
- vm_stat_unaccount(area);
- remove_vm_struct(area);
-}
-
/*
- * Update the VMA and inode share lists.
- *
- * Ok - we have the memory areas we should free on the 'free' list,
+ * Ok - we have the memory areas we should free on the vma list,
* so release them, and do the vma updates.
+ *
+ * Called with the mm semaphore held.
*/
-static void unmap_vma_list(struct mm_struct *mm, struct vm_area_struct *vma)
+static void remove_vma_list(struct mm_struct *mm, struct vm_area_struct *vma)
{
+ /* Update high watermark before we lower total_vm */
+ update_hiwater_vm(mm);
do {
- struct vm_area_struct *next = vma->vm_next;
- unmap_vma(mm, vma);
- vma = next;
+ long nrpages = vma_pages(vma);
+
+ mm->total_vm -= nrpages;
+ if (vma->vm_flags & VM_LOCKED)
+ mm->locked_vm -= nrpages;
+ vm_stat_account(mm, vma->vm_flags, vma->vm_file, -nrpages);
+ vma = remove_vma(vma);
} while (vma);
validate_mm(mm);
}
@@ -1651,14 +1671,13 @@
unsigned long nr_accounted = 0;
lru_add_drain();
- spin_lock(&mm->page_table_lock);
tlb = tlb_gather_mmu(mm, 0);
- unmap_vmas(&tlb, mm, vma, start, end, &nr_accounted, NULL);
+ update_hiwater_rss(mm);
+ unmap_vmas(&tlb, vma, start, end, &nr_accounted, NULL);
vm_unacct_memory(nr_accounted);
free_pgtables(&tlb, vma, prev? prev->vm_end: FIRST_USER_ADDRESS,
next? next->vm_start: 0);
tlb_finish_mmu(tlb, start, end);
- spin_unlock(&mm->page_table_lock);
}
/*
@@ -1799,7 +1818,7 @@
unmap_region(mm, vma, prev, start, end);
/* Fix up all other VM information */
- unmap_vma_list(mm, vma);
+ remove_vma_list(mm, vma);
return 0;
}
@@ -1821,7 +1840,7 @@
static inline void verify_mm_writelocked(struct mm_struct *mm)
{
-#ifdef CONFIG_DEBUG_KERNEL
+#ifdef CONFIG_DEBUG_VM
if (unlikely(down_read_trylock(&mm->mmap_sem))) {
WARN_ON(1);
up_read(&mm->mmap_sem);
@@ -1933,34 +1952,21 @@
unsigned long end;
lru_add_drain();
-
- spin_lock(&mm->page_table_lock);
-
flush_cache_mm(mm);
tlb = tlb_gather_mmu(mm, 1);
+ /* Don't update_hiwater_rss(mm) here, do_exit already did */
/* Use -1 here to ensure all VMAs in the mm are unmapped */
- end = unmap_vmas(&tlb, mm, vma, 0, -1, &nr_accounted, NULL);
+ end = unmap_vmas(&tlb, vma, 0, -1, &nr_accounted, NULL);
vm_unacct_memory(nr_accounted);
free_pgtables(&tlb, vma, FIRST_USER_ADDRESS, 0);
tlb_finish_mmu(tlb, 0, end);
- mm->mmap = mm->mmap_cache = NULL;
- mm->mm_rb = RB_ROOT;
- set_mm_counter(mm, rss, 0);
- mm->total_vm = 0;
- mm->locked_vm = 0;
-
- spin_unlock(&mm->page_table_lock);
-
/*
- * Walk the list again, actually closing and freeing it
- * without holding any MM locks.
+ * Walk the list again, actually closing and freeing it,
+ * with preemption enabled, without holding any MM locks.
*/
- while (vma) {
- struct vm_area_struct *next = vma->vm_next;
- remove_vm_struct(vma);
- vma = next;
- }
+ while (vma)
+ vma = remove_vma(vma);
BUG_ON(mm->nr_ptes > (FIRST_USER_ADDRESS+PMD_SIZE-1)>>PMD_SHIFT);
}
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 57577f6..17a2b52 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -29,8 +29,9 @@
unsigned long addr, unsigned long end, pgprot_t newprot)
{
pte_t *pte;
+ spinlock_t *ptl;
- pte = pte_offset_map(pmd, addr);
+ pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
do {
if (pte_present(*pte)) {
pte_t ptent;
@@ -44,7 +45,7 @@
lazy_mmu_prot_update(ptent);
}
} while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap(pte - 1);
+ pte_unmap_unlock(pte - 1, ptl);
}
static inline void change_pmd_range(struct mm_struct *mm, pud_t *pud,
@@ -88,7 +89,6 @@
BUG_ON(addr >= end);
pgd = pgd_offset(mm, addr);
flush_cache_range(vma, addr, end);
- spin_lock(&mm->page_table_lock);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
@@ -96,7 +96,6 @@
change_pud_range(mm, pgd, addr, next, newprot);
} while (pgd++, addr = next, addr != end);
flush_tlb_range(vma, start, end);
- spin_unlock(&mm->page_table_lock);
}
static int
@@ -125,6 +124,14 @@
* a MAP_NORESERVE private mapping to writable will now reserve.
*/
if (newflags & VM_WRITE) {
+ if (oldflags & VM_RESERVED) {
+ BUG_ON(oldflags & VM_WRITE);
+ printk(KERN_WARNING "program %s is using MAP_PRIVATE, "
+ "PROT_WRITE mprotect of VM_RESERVED memory, "
+ "which is deprecated. Please report this to "
+ "linux-kernel@vger.kernel.org\n",current->comm);
+ return -EACCES;
+ }
if (!(oldflags & (VM_ACCOUNT|VM_WRITE|VM_SHARED|VM_HUGETLB))) {
charged = nrpages;
if (security_vm_enough_memory(charged))
@@ -168,8 +175,8 @@
vma->vm_flags = newflags;
vma->vm_page_prot = newprot;
change_protection(vma, start, end, newprot);
- __vm_stat_account(mm, oldflags, vma->vm_file, -nrpages);
- __vm_stat_account(mm, newflags, vma->vm_file, nrpages);
+ vm_stat_account(mm, oldflags, vma->vm_file, -nrpages);
+ vm_stat_account(mm, newflags, vma->vm_file, nrpages);
return 0;
fail:
diff --git a/mm/mremap.c b/mm/mremap.c
index f343fc7..b535438 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -22,35 +22,7 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
-static pte_t *get_one_pte_map_nested(struct mm_struct *mm, unsigned long addr)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
-
- pgd = pgd_offset(mm, addr);
- if (pgd_none_or_clear_bad(pgd))
- goto end;
-
- pud = pud_offset(pgd, addr);
- if (pud_none_or_clear_bad(pud))
- goto end;
-
- pmd = pmd_offset(pud, addr);
- if (pmd_none_or_clear_bad(pmd))
- goto end;
-
- pte = pte_offset_map_nested(pmd, addr);
- if (pte_none(*pte)) {
- pte_unmap_nested(pte);
- pte = NULL;
- }
-end:
- return pte;
-}
-
-static pte_t *get_one_pte_map(struct mm_struct *mm, unsigned long addr)
+static pmd_t *get_old_pmd(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
pud_t *pud;
@@ -68,35 +40,39 @@
if (pmd_none_or_clear_bad(pmd))
return NULL;
- return pte_offset_map(pmd, addr);
+ return pmd;
}
-static inline pte_t *alloc_one_pte_map(struct mm_struct *mm, unsigned long addr)
+static pmd_t *alloc_new_pmd(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
- pte_t *pte = NULL;
pgd = pgd_offset(mm, addr);
-
pud = pud_alloc(mm, pgd, addr);
if (!pud)
return NULL;
+
pmd = pmd_alloc(mm, pud, addr);
- if (pmd)
- pte = pte_alloc_map(mm, pmd, addr);
- return pte;
+ if (!pmd)
+ return NULL;
+
+ if (!pmd_present(*pmd) && __pte_alloc(mm, pmd, addr))
+ return NULL;
+
+ return pmd;
}
-static int
-move_one_page(struct vm_area_struct *vma, unsigned long old_addr,
- struct vm_area_struct *new_vma, unsigned long new_addr)
+static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd,
+ unsigned long old_addr, unsigned long old_end,
+ struct vm_area_struct *new_vma, pmd_t *new_pmd,
+ unsigned long new_addr)
{
struct address_space *mapping = NULL;
struct mm_struct *mm = vma->vm_mm;
- int error = 0;
- pte_t *src, *dst;
+ pte_t *old_pte, *new_pte, pte;
+ spinlock_t *old_ptl, *new_ptl;
if (vma->vm_file) {
/*
@@ -111,74 +87,69 @@
new_vma->vm_truncate_count != vma->vm_truncate_count)
new_vma->vm_truncate_count = 0;
}
- spin_lock(&mm->page_table_lock);
- src = get_one_pte_map_nested(mm, old_addr);
- if (src) {
- /*
- * Look to see whether alloc_one_pte_map needs to perform a
- * memory allocation. If it does then we need to drop the
- * atomic kmap
- */
- dst = get_one_pte_map(mm, new_addr);
- if (unlikely(!dst)) {
- pte_unmap_nested(src);
- if (mapping)
- spin_unlock(&mapping->i_mmap_lock);
- dst = alloc_one_pte_map(mm, new_addr);
- if (mapping && !spin_trylock(&mapping->i_mmap_lock)) {
- spin_unlock(&mm->page_table_lock);
- spin_lock(&mapping->i_mmap_lock);
- spin_lock(&mm->page_table_lock);
- }
- src = get_one_pte_map_nested(mm, old_addr);
- }
- /*
- * Since alloc_one_pte_map can drop and re-acquire
- * page_table_lock, we should re-check the src entry...
- */
- if (src) {
- if (dst) {
- pte_t pte;
- pte = ptep_clear_flush(vma, old_addr, src);
+ /*
+ * We don't have to worry about the ordering of src and dst
+ * pte locks because exclusive mmap_sem prevents deadlock.
+ */
+ old_pte = pte_offset_map_lock(mm, old_pmd, old_addr, &old_ptl);
+ new_pte = pte_offset_map_nested(new_pmd, new_addr);
+ new_ptl = pte_lockptr(mm, new_pmd);
+ if (new_ptl != old_ptl)
+ spin_lock(new_ptl);
- /* ZERO_PAGE can be dependant on virtual addr */
- pte = move_pte(pte, new_vma->vm_page_prot,
- old_addr, new_addr);
- set_pte_at(mm, new_addr, dst, pte);
- } else
- error = -ENOMEM;
- pte_unmap_nested(src);
- }
- if (dst)
- pte_unmap(dst);
+ for (; old_addr < old_end; old_pte++, old_addr += PAGE_SIZE,
+ new_pte++, new_addr += PAGE_SIZE) {
+ if (pte_none(*old_pte))
+ continue;
+ pte = ptep_clear_flush(vma, old_addr, old_pte);
+ /* ZERO_PAGE can be dependant on virtual addr */
+ pte = move_pte(pte, new_vma->vm_page_prot, old_addr, new_addr);
+ set_pte_at(mm, new_addr, new_pte, pte);
}
- spin_unlock(&mm->page_table_lock);
+
+ if (new_ptl != old_ptl)
+ spin_unlock(new_ptl);
+ pte_unmap_nested(new_pte - 1);
+ pte_unmap_unlock(old_pte - 1, old_ptl);
if (mapping)
spin_unlock(&mapping->i_mmap_lock);
- return error;
}
+#define LATENCY_LIMIT (64 * PAGE_SIZE)
+
static unsigned long move_page_tables(struct vm_area_struct *vma,
unsigned long old_addr, struct vm_area_struct *new_vma,
unsigned long new_addr, unsigned long len)
{
- unsigned long offset;
+ unsigned long extent, next, old_end;
+ pmd_t *old_pmd, *new_pmd;
- flush_cache_range(vma, old_addr, old_addr + len);
+ old_end = old_addr + len;
+ flush_cache_range(vma, old_addr, old_end);
- /*
- * This is not the clever way to do this, but we're taking the
- * easy way out on the assumption that most remappings will be
- * only a few pages.. This also makes error recovery easier.
- */
- for (offset = 0; offset < len; offset += PAGE_SIZE) {
- if (move_one_page(vma, old_addr + offset,
- new_vma, new_addr + offset) < 0)
- break;
+ for (; old_addr < old_end; old_addr += extent, new_addr += extent) {
cond_resched();
+ next = (old_addr + PMD_SIZE) & PMD_MASK;
+ if (next - 1 > old_end)
+ next = old_end;
+ extent = next - old_addr;
+ old_pmd = get_old_pmd(vma->vm_mm, old_addr);
+ if (!old_pmd)
+ continue;
+ new_pmd = alloc_new_pmd(vma->vm_mm, new_addr);
+ if (!new_pmd)
+ break;
+ next = (new_addr + PMD_SIZE) & PMD_MASK;
+ if (extent > next - new_addr)
+ extent = next - new_addr;
+ if (extent > LATENCY_LIMIT)
+ extent = LATENCY_LIMIT;
+ move_ptes(vma, old_pmd, old_addr, old_addr + extent,
+ new_vma, new_pmd, new_addr);
}
- return offset;
+
+ return len + old_addr - old_end; /* how much done */
}
static unsigned long move_vma(struct vm_area_struct *vma,
@@ -191,6 +162,7 @@
unsigned long new_pgoff;
unsigned long moved_len;
unsigned long excess = 0;
+ unsigned long hiwater_vm;
int split = 0;
/*
@@ -229,17 +201,24 @@
}
/*
- * if we failed to move page tables we still do total_vm increment
- * since do_munmap() will decrement it by old_len == new_len
+ * If we failed to move page tables we still do total_vm increment
+ * since do_munmap() will decrement it by old_len == new_len.
+ *
+ * Since total_vm is about to be raised artificially high for a
+ * moment, we need to restore high watermark afterwards: if stats
+ * are taken meanwhile, total_vm and hiwater_vm appear too high.
+ * If this were a serious issue, we'd add a flag to do_munmap().
*/
+ hiwater_vm = mm->hiwater_vm;
mm->total_vm += new_len >> PAGE_SHIFT;
- __vm_stat_account(mm, vma->vm_flags, vma->vm_file, new_len>>PAGE_SHIFT);
+ vm_stat_account(mm, vma->vm_flags, vma->vm_file, new_len>>PAGE_SHIFT);
if (do_munmap(mm, old_addr, old_len) < 0) {
/* OOM: unable to split vma, just get accounts right */
vm_unacct_memory(excess >> PAGE_SHIFT);
excess = 0;
}
+ mm->hiwater_vm = hiwater_vm;
/* Restore VM_ACCOUNT if one or two pieces of vma left */
if (excess) {
@@ -269,6 +248,7 @@
unsigned long old_len, unsigned long new_len,
unsigned long flags, unsigned long new_addr)
{
+ struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
unsigned long charged = 0;
@@ -309,7 +289,7 @@
if ((addr <= new_addr) && (addr+old_len) > new_addr)
goto out;
- ret = do_munmap(current->mm, new_addr, new_len);
+ ret = do_munmap(mm, new_addr, new_len);
if (ret)
goto out;
}
@@ -320,7 +300,7 @@
* do_munmap does all the needed commit accounting
*/
if (old_len >= new_len) {
- ret = do_munmap(current->mm, addr+new_len, old_len - new_len);
+ ret = do_munmap(mm, addr+new_len, old_len - new_len);
if (ret && old_len != new_len)
goto out;
ret = addr;
@@ -333,7 +313,7 @@
* Ok, we need to grow.. or relocate.
*/
ret = -EFAULT;
- vma = find_vma(current->mm, addr);
+ vma = find_vma(mm, addr);
if (!vma || vma->vm_start > addr)
goto out;
if (is_vm_hugetlb_page(vma)) {
@@ -349,14 +329,14 @@
}
if (vma->vm_flags & VM_LOCKED) {
unsigned long locked, lock_limit;
- locked = current->mm->locked_vm << PAGE_SHIFT;
+ locked = mm->locked_vm << PAGE_SHIFT;
lock_limit = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur;
locked += new_len - old_len;
ret = -EAGAIN;
if (locked > lock_limit && !capable(CAP_IPC_LOCK))
goto out;
}
- if (!may_expand_vm(current->mm, (new_len - old_len) >> PAGE_SHIFT)) {
+ if (!may_expand_vm(mm, (new_len - old_len) >> PAGE_SHIFT)) {
ret = -ENOMEM;
goto out;
}
@@ -383,11 +363,10 @@
vma_adjust(vma, vma->vm_start,
addr + new_len, vma->vm_pgoff, NULL);
- current->mm->total_vm += pages;
- __vm_stat_account(vma->vm_mm, vma->vm_flags,
- vma->vm_file, pages);
+ mm->total_vm += pages;
+ vm_stat_account(mm, vma->vm_flags, vma->vm_file, pages);
if (vma->vm_flags & VM_LOCKED) {
- current->mm->locked_vm += pages;
+ mm->locked_vm += pages;
make_pages_present(addr + old_len,
addr + new_len);
}
diff --git a/mm/msync.c b/mm/msync.c
index d0f5a1b..0e040e9 100644
--- a/mm/msync.c
+++ b/mm/msync.c
@@ -17,40 +17,48 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
-/*
- * Called with mm->page_table_lock held to protect against other
- * threads/the swapper from ripping pte's out from under us.
- */
-
-static void sync_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
+static void msync_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
unsigned long addr, unsigned long end)
{
pte_t *pte;
+ spinlock_t *ptl;
+ int progress = 0;
- pte = pte_offset_map(pmd, addr);
+again:
+ pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
do {
unsigned long pfn;
struct page *page;
+ if (progress >= 64) {
+ progress = 0;
+ if (need_resched() || need_lockbreak(ptl))
+ break;
+ }
+ progress++;
if (!pte_present(*pte))
continue;
if (!pte_maybe_dirty(*pte))
continue;
pfn = pte_pfn(*pte);
- if (!pfn_valid(pfn))
+ if (unlikely(!pfn_valid(pfn))) {
+ print_bad_pte(vma, *pte, addr);
continue;
+ }
page = pfn_to_page(pfn);
- if (PageReserved(page))
- continue;
if (ptep_clear_flush_dirty(vma, addr, pte) ||
page_test_and_clear_dirty(page))
set_page_dirty(page);
+ progress += 3;
} while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap(pte - 1);
+ pte_unmap_unlock(pte - 1, ptl);
+ cond_resched();
+ if (addr != end)
+ goto again;
}
-static inline void sync_pmd_range(struct vm_area_struct *vma, pud_t *pud,
+static inline void msync_pmd_range(struct vm_area_struct *vma, pud_t *pud,
unsigned long addr, unsigned long end)
{
pmd_t *pmd;
@@ -61,11 +69,11 @@
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
- sync_pte_range(vma, pmd, addr, next);
+ msync_pte_range(vma, pmd, addr, next);
} while (pmd++, addr = next, addr != end);
}
-static inline void sync_pud_range(struct vm_area_struct *vma, pgd_t *pgd,
+static inline void msync_pud_range(struct vm_area_struct *vma, pgd_t *pgd,
unsigned long addr, unsigned long end)
{
pud_t *pud;
@@ -76,59 +84,35 @@
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud))
continue;
- sync_pmd_range(vma, pud, addr, next);
+ msync_pmd_range(vma, pud, addr, next);
} while (pud++, addr = next, addr != end);
}
-static void sync_page_range(struct vm_area_struct *vma,
+static void msync_page_range(struct vm_area_struct *vma,
unsigned long addr, unsigned long end)
{
- struct mm_struct *mm = vma->vm_mm;
pgd_t *pgd;
unsigned long next;
/* For hugepages we can't go walking the page table normally,
* but that's ok, hugetlbfs is memory based, so we don't need
- * to do anything more on an msync() */
- if (is_vm_hugetlb_page(vma))
+ * to do anything more on an msync().
+ * Can't do anything with VM_RESERVED regions either.
+ */
+ if (vma->vm_flags & (VM_HUGETLB|VM_RESERVED))
return;
BUG_ON(addr >= end);
- pgd = pgd_offset(mm, addr);
+ pgd = pgd_offset(vma->vm_mm, addr);
flush_cache_range(vma, addr, end);
- spin_lock(&mm->page_table_lock);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
- sync_pud_range(vma, pgd, addr, next);
+ msync_pud_range(vma, pgd, addr, next);
} while (pgd++, addr = next, addr != end);
- spin_unlock(&mm->page_table_lock);
}
-#ifdef CONFIG_PREEMPT
-static inline void filemap_sync(struct vm_area_struct *vma,
- unsigned long addr, unsigned long end)
-{
- const size_t chunk = 64 * 1024; /* bytes */
- unsigned long next;
-
- do {
- next = addr + chunk;
- if (next > end || next < addr)
- next = end;
- sync_page_range(vma, addr, next);
- cond_resched();
- } while (addr = next, addr != end);
-}
-#else
-static inline void filemap_sync(struct vm_area_struct *vma,
- unsigned long addr, unsigned long end)
-{
- sync_page_range(vma, addr, end);
-}
-#endif
-
/*
* MS_SYNC syncs the entire file - including mappings.
*
@@ -150,7 +134,7 @@
return -EBUSY;
if (file && (vma->vm_flags & VM_SHARED)) {
- filemap_sync(vma, addr, end);
+ msync_page_range(vma, addr, end);
if (flags & MS_SYNC) {
struct address_space *mapping = file->f_mapping;
diff --git a/mm/nommu.c b/mm/nommu.c
index 0ef241a..d1e076a 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -931,6 +931,8 @@
realalloc -= kobjsize(vml);
askedalloc -= sizeof(*vml);
kfree(vml);
+
+ update_hiwater_vm(mm);
mm->total_vm -= len >> PAGE_SHIFT;
#ifdef DEBUG
@@ -1047,7 +1049,8 @@
EXPORT_SYMBOL(find_vma);
-struct page * follow_page(struct mm_struct *mm, unsigned long addr, int write)
+struct page *follow_page(struct mm_struct *mm, unsigned long address,
+ unsigned int foll_flags)
{
return NULL;
}
@@ -1078,19 +1081,6 @@
{
}
-void update_mem_hiwater(struct task_struct *tsk)
-{
- unsigned long rss;
-
- if (likely(tsk->mm)) {
- rss = get_mm_counter(tsk->mm, rss);
- if (tsk->mm->hiwater_rss < rss)
- tsk->mm->hiwater_rss = rss;
- if (tsk->mm->hiwater_vm < tsk->mm->total_vm)
- tsk->mm->hiwater_vm = tsk->mm->total_vm;
- }
-}
-
void unmap_mapping_range(struct address_space *mapping,
loff_t const holebegin, loff_t const holelen,
int even_cows)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e1d3d77..2dbdd98 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -33,6 +33,7 @@
#include <linux/sysctl.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
+#include <linux/memory_hotplug.h>
#include <linux/nodemask.h>
#include <linux/vmalloc.h>
@@ -78,21 +79,44 @@
unsigned long __initdata nr_kernel_pages;
unsigned long __initdata nr_all_pages;
+static int page_outside_zone_boundaries(struct zone *zone, struct page *page)
+{
+ int ret = 0;
+ unsigned seq;
+ unsigned long pfn = page_to_pfn(page);
+
+ do {
+ seq = zone_span_seqbegin(zone);
+ if (pfn >= zone->zone_start_pfn + zone->spanned_pages)
+ ret = 1;
+ else if (pfn < zone->zone_start_pfn)
+ ret = 1;
+ } while (zone_span_seqretry(zone, seq));
+
+ return ret;
+}
+
+static int page_is_consistent(struct zone *zone, struct page *page)
+{
+#ifdef CONFIG_HOLES_IN_ZONE
+ if (!pfn_valid(page_to_pfn(page)))
+ return 0;
+#endif
+ if (zone != page_zone(page))
+ return 0;
+
+ return 1;
+}
/*
* Temporary debugging check for pages not lying within a given zone.
*/
static int bad_range(struct zone *zone, struct page *page)
{
- if (page_to_pfn(page) >= zone->zone_start_pfn + zone->spanned_pages)
+ if (page_outside_zone_boundaries(zone, page))
return 1;
- if (page_to_pfn(page) < zone->zone_start_pfn)
+ if (!page_is_consistent(zone, page))
return 1;
-#ifdef CONFIG_HOLES_IN_ZONE
- if (!pfn_valid(page_to_pfn(page)))
- return 1;
-#endif
- if (zone != page_zone(page))
- return 1;
+
return 0;
}
@@ -114,7 +138,8 @@
1 << PG_reclaim |
1 << PG_slab |
1 << PG_swapcache |
- 1 << PG_writeback);
+ 1 << PG_writeback |
+ 1 << PG_reserved );
set_page_count(page, 0);
reset_page_mapcount(page);
page->mapping = NULL;
@@ -153,7 +178,7 @@
struct page *p = page + i;
SetPageCompound(p);
- p->private = (unsigned long)page;
+ set_page_private(p, (unsigned long)page);
}
}
@@ -173,7 +198,7 @@
if (!PageCompound(p))
bad_page(__FUNCTION__, page);
- if (p->private != (unsigned long)page)
+ if (page_private(p) != (unsigned long)page)
bad_page(__FUNCTION__, page);
ClearPageCompound(p);
}
@@ -186,18 +211,18 @@
* So, we don't need atomic page->flags operations here.
*/
static inline unsigned long page_order(struct page *page) {
- return page->private;
+ return page_private(page);
}
static inline void set_page_order(struct page *page, int order) {
- page->private = order;
+ set_page_private(page, order);
__SetPagePrivate(page);
}
static inline void rmv_page_order(struct page *page)
{
__ClearPagePrivate(page);
- page->private = 0;
+ set_page_private(page, 0);
}
/*
@@ -237,14 +262,13 @@
* (a) the buddy is free &&
* (b) the buddy is on the buddy system &&
* (c) a page and its buddy have the same order.
- * for recording page's order, we use page->private and PG_private.
+ * for recording page's order, we use page_private(page) and PG_private.
*
*/
static inline int page_is_buddy(struct page *page, int order)
{
if (PagePrivate(page) &&
(page_order(page) == order) &&
- !PageReserved(page) &&
page_count(page) == 0)
return 1;
return 0;
@@ -264,7 +288,7 @@
* parts of the VM system.
* At each level, we keep a list of pages, which are heads of continuous
* free pages of length of (1 << order) and marked with PG_Private.Page's
- * order is recorded in page->private field.
+ * order is recorded in page_private(page) field.
* So when we are allocating or freeing one, we can derive the state of the
* other. That is, if we allocate a small block, and both were
* free, the remainder of the region must be split into blocks.
@@ -327,7 +351,8 @@
1 << PG_reclaim |
1 << PG_slab |
1 << PG_swapcache |
- 1 << PG_writeback )))
+ 1 << PG_writeback |
+ 1 << PG_reserved )))
bad_page(function, page);
if (PageDirty(page))
__ClearPageDirty(page);
@@ -455,13 +480,14 @@
1 << PG_reclaim |
1 << PG_slab |
1 << PG_swapcache |
- 1 << PG_writeback )))
+ 1 << PG_writeback |
+ 1 << PG_reserved )))
bad_page(__FUNCTION__, page);
page->flags &= ~(1 << PG_uptodate | 1 << PG_error |
1 << PG_referenced | 1 << PG_arch_1 |
1 << PG_checked | 1 << PG_mappedtodisk);
- page->private = 0;
+ set_page_private(page, 0);
set_page_refs(page, order);
kernel_map_pages(page, 1 << order, 1);
}
@@ -734,7 +760,7 @@
* of the allocation.
*/
int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
- int classzone_idx, int can_try_harder, int gfp_high)
+ int classzone_idx, int can_try_harder, gfp_t gfp_high)
{
/* free_pages my go negative - that's OK */
long min = mark, free_pages = z->free_pages - (1 << order) + 1;
@@ -777,7 +803,7 @@
__alloc_pages(gfp_t gfp_mask, unsigned int order,
struct zonelist *zonelist)
{
- const int wait = gfp_mask & __GFP_WAIT;
+ const gfp_t wait = gfp_mask & __GFP_WAIT;
struct zone **zones, *z;
struct page *page;
struct reclaim_state reclaim_state;
@@ -996,7 +1022,7 @@
* get_zeroed_page() returns a 32-bit address, which cannot represent
* a highmem page
*/
- BUG_ON(gfp_mask & __GFP_HIGHMEM);
+ BUG_ON((gfp_mask & __GFP_HIGHMEM) != 0);
page = alloc_pages(gfp_mask | __GFP_ZERO, 0);
if (page)
@@ -1016,7 +1042,7 @@
fastcall void __free_pages(struct page *page, unsigned int order)
{
- if (!PageReserved(page) && put_page_testzero(page)) {
+ if (put_page_testzero(page)) {
if (order == 0)
free_hot_page(page);
else
@@ -1089,7 +1115,7 @@
*/
unsigned int nr_free_buffer_pages(void)
{
- return nr_free_zone_pages(GFP_USER & GFP_ZONEMASK);
+ return nr_free_zone_pages(gfp_zone(GFP_USER));
}
/*
@@ -1097,7 +1123,7 @@
*/
unsigned int nr_free_pagecache_pages(void)
{
- return nr_free_zone_pages(GFP_HIGHUSER & GFP_ZONEMASK);
+ return nr_free_zone_pages(gfp_zone(GFP_HIGHUSER));
}
#ifdef CONFIG_HIGHMEM
@@ -1305,12 +1331,9 @@
} else
printk("\n");
- for (cpu = 0; cpu < NR_CPUS; ++cpu) {
+ for_each_cpu(cpu) {
struct per_cpu_pageset *pageset;
- if (!cpu_possible(cpu))
- continue;
-
pageset = zone_pcp(zone, cpu);
for (temperature = 0; temperature < 2; temperature++)
@@ -1428,6 +1451,16 @@
return j;
}
+static inline int highest_zone(int zone_bits)
+{
+ int res = ZONE_NORMAL;
+ if (zone_bits & (__force int)__GFP_HIGHMEM)
+ res = ZONE_HIGHMEM;
+ if (zone_bits & (__force int)__GFP_DMA)
+ res = ZONE_DMA;
+ return res;
+}
+
#ifdef CONFIG_NUMA
#define MAX_NODE_LOAD (num_online_nodes())
static int __initdata node_load[MAX_NUMNODES];
@@ -1524,11 +1557,7 @@
zonelist = pgdat->node_zonelists + i;
for (j = 0; zonelist->zones[j] != NULL; j++);
- k = ZONE_NORMAL;
- if (i & __GFP_HIGHMEM)
- k = ZONE_HIGHMEM;
- if (i & __GFP_DMA)
- k = ZONE_DMA;
+ k = highest_zone(i);
j = build_zonelists_node(NODE_DATA(node), zonelist, j, k);
zonelist->zones[j] = NULL;
@@ -1549,12 +1578,7 @@
zonelist = pgdat->node_zonelists + i;
j = 0;
- k = ZONE_NORMAL;
- if (i & __GFP_HIGHMEM)
- k = ZONE_HIGHMEM;
- if (i & __GFP_DMA)
- k = ZONE_DMA;
-
+ k = highest_zone(i);
j = build_zonelists_node(pgdat, zonelist, j, k);
/*
* Now we build the zonelist so that it contains the zones
@@ -1659,7 +1683,7 @@
* up by free_all_bootmem() once the early boot process is
* done. Non-atomic initialization, single-pass.
*/
-void __init memmap_init_zone(unsigned long size, int nid, unsigned long zone,
+void __devinit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
unsigned long start_pfn)
{
struct page *page;
@@ -1673,7 +1697,7 @@
continue;
page = pfn_to_page(pfn);
set_page_links(page, zone, nid, pfn);
- set_page_count(page, 0);
+ set_page_count(page, 1);
reset_page_mapcount(page);
SetPageReserved(page);
INIT_LIST_HEAD(&page->lru);
@@ -1720,29 +1744,29 @@
/*
* The per-cpu-pages pools are set to around 1000th of the
- * size of the zone. But no more than 1/4 of a meg - there's
- * no point in going beyond the size of L2 cache.
+ * size of the zone. But no more than 1/2 of a meg.
*
* OK, so we don't know how big the cache is. So guess.
*/
batch = zone->present_pages / 1024;
- if (batch * PAGE_SIZE > 256 * 1024)
- batch = (256 * 1024) / PAGE_SIZE;
+ if (batch * PAGE_SIZE > 512 * 1024)
+ batch = (512 * 1024) / PAGE_SIZE;
batch /= 4; /* We effectively *= 4 below */
if (batch < 1)
batch = 1;
/*
- * Clamp the batch to a 2^n - 1 value. Having a power
- * of 2 value was found to be more likely to have
- * suboptimal cache aliasing properties in some cases.
+ * We will be trying to allcoate bigger chunks of contiguous
+ * memory of the order of fls(batch). This should result in
+ * better cache coloring.
*
- * For example if 2 tasks are alternately allocating
- * batches of pages, one task can end up with a lot
- * of pages of one half of the possible page colors
- * and the other with pages of the other colors.
+ * A sanity check also to ensure that batch is still in limits.
*/
- batch = (1 << fls(batch + batch/2)) - 1;
+ batch = (1 << fls(batch + batch/2));
+
+ if (fls(batch) >= (PAGE_SHIFT + MAX_ORDER - 2))
+ batch = PAGE_SHIFT + ((MAX_ORDER - 1 - PAGE_SHIFT)/2);
+
return batch;
}
@@ -1754,7 +1778,7 @@
pcp = &p->pcp[0]; /* hot */
pcp->count = 0;
- pcp->low = 2 * batch;
+ pcp->low = 0;
pcp->high = 6 * batch;
pcp->batch = max(1UL, 1 * batch);
INIT_LIST_HEAD(&pcp->list);
@@ -1763,7 +1787,7 @@
pcp->count = 0;
pcp->low = 0;
pcp->high = 2 * batch;
- pcp->batch = max(1UL, 1 * batch);
+ pcp->batch = max(1UL, batch/2);
INIT_LIST_HEAD(&pcp->list);
}
@@ -1872,6 +1896,60 @@
#endif
+static __devinit
+void zone_wait_table_init(struct zone *zone, unsigned long zone_size_pages)
+{
+ int i;
+ struct pglist_data *pgdat = zone->zone_pgdat;
+
+ /*
+ * The per-page waitqueue mechanism uses hashed waitqueues
+ * per zone.
+ */
+ zone->wait_table_size = wait_table_size(zone_size_pages);
+ zone->wait_table_bits = wait_table_bits(zone->wait_table_size);
+ zone->wait_table = (wait_queue_head_t *)
+ alloc_bootmem_node(pgdat, zone->wait_table_size
+ * sizeof(wait_queue_head_t));
+
+ for(i = 0; i < zone->wait_table_size; ++i)
+ init_waitqueue_head(zone->wait_table + i);
+}
+
+static __devinit void zone_pcp_init(struct zone *zone)
+{
+ int cpu;
+ unsigned long batch = zone_batchsize(zone);
+
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+#ifdef CONFIG_NUMA
+ /* Early boot. Slab allocator not functional yet */
+ zone->pageset[cpu] = &boot_pageset[cpu];
+ setup_pageset(&boot_pageset[cpu],0);
+#else
+ setup_pageset(zone_pcp(zone,cpu), batch);
+#endif
+ }
+ printk(KERN_DEBUG " %s zone: %lu pages, LIFO batch:%lu\n",
+ zone->name, zone->present_pages, batch);
+}
+
+static __devinit void init_currently_empty_zone(struct zone *zone,
+ unsigned long zone_start_pfn, unsigned long size)
+{
+ struct pglist_data *pgdat = zone->zone_pgdat;
+
+ zone_wait_table_init(zone, size);
+ pgdat->nr_zones = zone_idx(zone) + 1;
+
+ zone->zone_mem_map = pfn_to_page(zone_start_pfn);
+ zone->zone_start_pfn = zone_start_pfn;
+
+ memmap_init(size, pgdat->node_id, zone_idx(zone), zone_start_pfn);
+
+ zone_init_free_lists(pgdat, zone, zone->spanned_pages);
+}
+
/*
* Set up the zone data structures:
* - mark all pages reserved
@@ -1881,10 +1959,11 @@
static void __init free_area_init_core(struct pglist_data *pgdat,
unsigned long *zones_size, unsigned long *zholes_size)
{
- unsigned long i, j;
- int cpu, nid = pgdat->node_id;
+ unsigned long j;
+ int nid = pgdat->node_id;
unsigned long zone_start_pfn = pgdat->node_start_pfn;
+ pgdat_resize_init(pgdat);
pgdat->nr_zones = 0;
init_waitqueue_head(&pgdat->kswapd_wait);
pgdat->kswapd_max_order = 0;
@@ -1892,7 +1971,6 @@
for (j = 0; j < MAX_NR_ZONES; j++) {
struct zone *zone = pgdat->node_zones + j;
unsigned long size, realsize;
- unsigned long batch;
realsize = size = zones_size[j];
if (zholes_size)
@@ -1907,24 +1985,13 @@
zone->name = zone_names[j];
spin_lock_init(&zone->lock);
spin_lock_init(&zone->lru_lock);
+ zone_seqlock_init(zone);
zone->zone_pgdat = pgdat;
zone->free_pages = 0;
zone->temp_priority = zone->prev_priority = DEF_PRIORITY;
- batch = zone_batchsize(zone);
-
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
-#ifdef CONFIG_NUMA
- /* Early boot. Slab allocator not functional yet */
- zone->pageset[cpu] = &boot_pageset[cpu];
- setup_pageset(&boot_pageset[cpu],0);
-#else
- setup_pageset(zone_pcp(zone,cpu), batch);
-#endif
- }
- printk(KERN_DEBUG " %s zone: %lu pages, LIFO batch:%lu\n",
- zone_names[j], realsize, batch);
+ zone_pcp_init(zone);
INIT_LIST_HEAD(&zone->active_list);
INIT_LIST_HEAD(&zone->inactive_list);
zone->nr_scan_active = 0;
@@ -1935,32 +2002,9 @@
if (!size)
continue;
- /*
- * The per-page waitqueue mechanism uses hashed waitqueues
- * per zone.
- */
- zone->wait_table_size = wait_table_size(size);
- zone->wait_table_bits =
- wait_table_bits(zone->wait_table_size);
- zone->wait_table = (wait_queue_head_t *)
- alloc_bootmem_node(pgdat, zone->wait_table_size
- * sizeof(wait_queue_head_t));
-
- for(i = 0; i < zone->wait_table_size; ++i)
- init_waitqueue_head(zone->wait_table + i);
-
- pgdat->nr_zones = j+1;
-
- zone->zone_mem_map = pfn_to_page(zone_start_pfn);
- zone->zone_start_pfn = zone_start_pfn;
-
- memmap_init(size, nid, j, zone_start_pfn);
-
zonetable_add(zone, nid, j, zone_start_pfn, size);
-
+ init_currently_empty_zone(zone, zone_start_pfn, size);
zone_start_pfn += size;
-
- zone_init_free_lists(pgdat, zone, zone->spanned_pages);
}
}
@@ -2360,7 +2404,7 @@
* that the pages_{min,low,high} values for each zone are set correctly
* with respect to min_free_kbytes.
*/
-static void setup_per_zone_pages_min(void)
+void setup_per_zone_pages_min(void)
{
unsigned long pages_min = min_free_kbytes >> (PAGE_SHIFT - 10);
unsigned long lowmem_pages = 0;
diff --git a/mm/page_io.c b/mm/page_io.c
index 330e00d..bb2b0d5 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -91,7 +91,8 @@
unlock_page(page);
goto out;
}
- bio = get_swap_bio(GFP_NOIO, page->private, page, end_swap_bio_write);
+ bio = get_swap_bio(GFP_NOIO, page_private(page), page,
+ end_swap_bio_write);
if (bio == NULL) {
set_page_dirty(page);
unlock_page(page);
@@ -115,7 +116,8 @@
BUG_ON(!PageLocked(page));
ClearPageUptodate(page);
- bio = get_swap_bio(GFP_KERNEL, page->private, page, end_swap_bio_read);
+ bio = get_swap_bio(GFP_KERNEL, page_private(page), page,
+ end_swap_bio_read);
if (bio == NULL) {
unlock_page(page);
ret = -ENOMEM;
diff --git a/mm/pdflush.c b/mm/pdflush.c
index d678195..52822c9 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -20,6 +20,7 @@
#include <linux/fs.h> // Needed by writeback.h
#include <linux/writeback.h> // Prototypes pdflush_operation()
#include <linux/kthread.h>
+#include <linux/cpuset.h>
/*
@@ -170,12 +171,24 @@
static int pdflush(void *dummy)
{
struct pdflush_work my_work;
+ cpumask_t cpus_allowed;
/*
* pdflush can spend a lot of time doing encryption via dm-crypt. We
* don't want to do that at keventd's priority.
*/
set_user_nice(current, 0);
+
+ /*
+ * Some configs put our parent kthread in a limited cpuset,
+ * which kthread() overrides, forcing cpus_allowed == CPU_MASK_ALL.
+ * Our needs are more modest - cut back to our cpusets cpus_allowed.
+ * This is needed as pdflush's are dynamically created and destroyed.
+ * The boottime pdflush's are easily placed w/o these 2 lines.
+ */
+ cpus_allowed = cpuset_cpus_allowed(current);
+ set_cpus_allowed(current, cpus_allowed);
+
return __pdflush(&my_work);
}
diff --git a/mm/rmap.c b/mm/rmap.c
index 450f524..914d04b 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -32,7 +32,7 @@
* page->flags PG_locked (lock_page)
* mapping->i_mmap_lock
* anon_vma->lock
- * mm->page_table_lock
+ * mm->page_table_lock or pte_lock
* zone->lru_lock (in mark_page_accessed)
* swap_lock (in swap_duplicate, swap_info_get)
* mmlist_lock (in mmput, drain_mmlist and others)
@@ -244,37 +244,44 @@
/*
* Check that @page is mapped at @address into @mm.
*
- * On success returns with mapped pte and locked mm->page_table_lock.
+ * On success returns with pte mapped and locked.
*/
pte_t *page_check_address(struct page *page, struct mm_struct *mm,
- unsigned long address)
+ unsigned long address, spinlock_t **ptlp)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
+ spinlock_t *ptl;
- /*
- * We need the page_table_lock to protect us from page faults,
- * munmap, fork, etc...
- */
- spin_lock(&mm->page_table_lock);
pgd = pgd_offset(mm, address);
- if (likely(pgd_present(*pgd))) {
- pud = pud_offset(pgd, address);
- if (likely(pud_present(*pud))) {
- pmd = pmd_offset(pud, address);
- if (likely(pmd_present(*pmd))) {
- pte = pte_offset_map(pmd, address);
- if (likely(pte_present(*pte) &&
- page_to_pfn(page) == pte_pfn(*pte)))
- return pte;
- pte_unmap(pte);
- }
- }
+ if (!pgd_present(*pgd))
+ return NULL;
+
+ pud = pud_offset(pgd, address);
+ if (!pud_present(*pud))
+ return NULL;
+
+ pmd = pmd_offset(pud, address);
+ if (!pmd_present(*pmd))
+ return NULL;
+
+ pte = pte_offset_map(pmd, address);
+ /* Make a quick check before getting the lock */
+ if (!pte_present(*pte)) {
+ pte_unmap(pte);
+ return NULL;
}
- spin_unlock(&mm->page_table_lock);
- return ERR_PTR(-ENOENT);
+
+ ptl = pte_lockptr(mm, pmd);
+ spin_lock(ptl);
+ if (pte_present(*pte) && page_to_pfn(page) == pte_pfn(*pte)) {
+ *ptlp = ptl;
+ return pte;
+ }
+ pte_unmap_unlock(pte, ptl);
+ return NULL;
}
/*
@@ -287,24 +294,28 @@
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
pte_t *pte;
+ spinlock_t *ptl;
int referenced = 0;
address = vma_address(page, vma);
if (address == -EFAULT)
goto out;
- pte = page_check_address(page, mm, address);
- if (!IS_ERR(pte)) {
- if (ptep_clear_flush_young(vma, address, pte))
- referenced++;
+ pte = page_check_address(page, mm, address, &ptl);
+ if (!pte)
+ goto out;
- if (mm != current->mm && !ignore_token && has_swap_token(mm))
- referenced++;
+ if (ptep_clear_flush_young(vma, address, pte))
+ referenced++;
- (*mapcount)--;
- pte_unmap(pte);
- spin_unlock(&mm->page_table_lock);
- }
+ /* Pretend the page is referenced if the task has the
+ swap token and is in the middle of a page fault. */
+ if (mm != current->mm && !ignore_token && has_swap_token(mm) &&
+ rwsem_is_locked(&mm->mmap_sem))
+ referenced++;
+
+ (*mapcount)--;
+ pte_unmap_unlock(pte, ptl);
out:
return referenced;
}
@@ -434,15 +445,11 @@
* @vma: the vm area in which the mapping is added
* @address: the user virtual address mapped
*
- * The caller needs to hold the mm->page_table_lock.
+ * The caller needs to hold the pte lock.
*/
void page_add_anon_rmap(struct page *page,
struct vm_area_struct *vma, unsigned long address)
{
- BUG_ON(PageReserved(page));
-
- inc_mm_counter(vma->vm_mm, anon_rss);
-
if (atomic_inc_and_test(&page->_mapcount)) {
struct anon_vma *anon_vma = vma->anon_vma;
@@ -461,13 +468,12 @@
* page_add_file_rmap - add pte mapping to a file page
* @page: the page to add the mapping to
*
- * The caller needs to hold the mm->page_table_lock.
+ * The caller needs to hold the pte lock.
*/
void page_add_file_rmap(struct page *page)
{
BUG_ON(PageAnon(page));
- if (!pfn_valid(page_to_pfn(page)) || PageReserved(page))
- return;
+ BUG_ON(!pfn_valid(page_to_pfn(page)));
if (atomic_inc_and_test(&page->_mapcount))
inc_page_state(nr_mapped);
@@ -477,12 +483,10 @@
* page_remove_rmap - take down pte mapping from a page
* @page: page to remove mapping from
*
- * Caller needs to hold the mm->page_table_lock.
+ * The caller needs to hold the pte lock.
*/
void page_remove_rmap(struct page *page)
{
- BUG_ON(PageReserved(page));
-
if (atomic_add_negative(-1, &page->_mapcount)) {
BUG_ON(page_mapcount(page) < 0);
/*
@@ -510,14 +514,15 @@
unsigned long address;
pte_t *pte;
pte_t pteval;
+ spinlock_t *ptl;
int ret = SWAP_AGAIN;
address = vma_address(page, vma);
if (address == -EFAULT)
goto out;
- pte = page_check_address(page, mm, address);
- if (IS_ERR(pte))
+ pte = page_check_address(page, mm, address, &ptl);
+ if (!pte)
goto out;
/*
@@ -541,8 +546,11 @@
if (pte_dirty(pteval))
set_page_dirty(page);
+ /* Update high watermark before we lower rss */
+ update_hiwater_rss(mm);
+
if (PageAnon(page)) {
- swp_entry_t entry = { .val = page->private };
+ swp_entry_t entry = { .val = page_private(page) };
/*
* Store the swap location in the pte.
* See handle_pte_fault() ...
@@ -551,21 +559,21 @@
swap_duplicate(entry);
if (list_empty(&mm->mmlist)) {
spin_lock(&mmlist_lock);
- list_add(&mm->mmlist, &init_mm.mmlist);
+ if (list_empty(&mm->mmlist))
+ list_add(&mm->mmlist, &init_mm.mmlist);
spin_unlock(&mmlist_lock);
}
set_pte_at(mm, address, pte, swp_entry_to_pte(entry));
BUG_ON(pte_file(*pte));
dec_mm_counter(mm, anon_rss);
- }
+ } else
+ dec_mm_counter(mm, file_rss);
- dec_mm_counter(mm, rss);
page_remove_rmap(page);
page_cache_release(page);
out_unmap:
- pte_unmap(pte);
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(pte, ptl);
out:
return ret;
}
@@ -599,19 +607,14 @@
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
- pte_t *pte, *original_pte;
+ pte_t *pte;
pte_t pteval;
+ spinlock_t *ptl;
struct page *page;
unsigned long address;
unsigned long end;
unsigned long pfn;
- /*
- * We need the page_table_lock to protect us from page faults,
- * munmap, fork, etc...
- */
- spin_lock(&mm->page_table_lock);
-
address = (vma->vm_start + cursor) & CLUSTER_MASK;
end = address + CLUSTER_SIZE;
if (address < vma->vm_start)
@@ -621,30 +624,33 @@
pgd = pgd_offset(mm, address);
if (!pgd_present(*pgd))
- goto out_unlock;
+ return;
pud = pud_offset(pgd, address);
if (!pud_present(*pud))
- goto out_unlock;
+ return;
pmd = pmd_offset(pud, address);
if (!pmd_present(*pmd))
- goto out_unlock;
+ return;
- for (original_pte = pte = pte_offset_map(pmd, address);
- address < end; pte++, address += PAGE_SIZE) {
+ pte = pte_offset_map_lock(mm, pmd, address, &ptl);
+ /* Update high watermark before we lower rss */
+ update_hiwater_rss(mm);
+
+ for (; address < end; pte++, address += PAGE_SIZE) {
if (!pte_present(*pte))
continue;
pfn = pte_pfn(*pte);
- if (!pfn_valid(pfn))
+ if (unlikely(!pfn_valid(pfn))) {
+ print_bad_pte(vma, *pte, address);
continue;
+ }
page = pfn_to_page(pfn);
BUG_ON(PageAnon(page));
- if (PageReserved(page))
- continue;
if (ptep_clear_flush_young(vma, address, pte))
continue;
@@ -663,13 +669,10 @@
page_remove_rmap(page);
page_cache_release(page);
- dec_mm_counter(mm, rss);
+ dec_mm_counter(mm, file_rss);
(*mapcount)--;
}
-
- pte_unmap(original_pte);
-out_unlock:
- spin_unlock(&mm->page_table_lock);
+ pte_unmap_unlock(pte - 1, ptl);
}
static int try_to_unmap_anon(struct page *page)
@@ -806,7 +809,6 @@
{
int ret;
- BUG_ON(PageReserved(page));
BUG_ON(!PageLocked(page));
if (PageAnon(page))
diff --git a/mm/shmem.c b/mm/shmem.c
index ea064d8..dc25565 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -71,9 +71,6 @@
/* Pretend that each entry is of this size in directory's i_size */
#define BOGO_DIRENT_SIZE 20
-/* Keep swapped page count in private field of indirect struct page */
-#define nr_swapped private
-
/* Flag allocation requirements to shmem_getpage and shmem_swp_alloc */
enum sgp_type {
SGP_QUICK, /* don't try more than file page cache lookup */
@@ -85,7 +82,7 @@
static int shmem_getpage(struct inode *inode, unsigned long idx,
struct page **pagep, enum sgp_type sgp, int *type);
-static inline struct page *shmem_dir_alloc(unsigned int gfp_mask)
+static inline struct page *shmem_dir_alloc(gfp_t gfp_mask)
{
/*
* The above definition of ENTRIES_PER_PAGE, and the use of
@@ -324,8 +321,10 @@
entry->val = value;
info->swapped += incdec;
- if ((unsigned long)(entry - info->i_direct) >= SHMEM_NR_DIRECT)
- kmap_atomic_to_page(entry)->nr_swapped += incdec;
+ if ((unsigned long)(entry - info->i_direct) >= SHMEM_NR_DIRECT) {
+ struct page *page = kmap_atomic_to_page(entry);
+ set_page_private(page, page_private(page) + incdec);
+ }
}
/*
@@ -368,9 +367,8 @@
spin_unlock(&info->lock);
page = shmem_dir_alloc(mapping_gfp_mask(inode->i_mapping) | __GFP_ZERO);
- if (page) {
- page->nr_swapped = 0;
- }
+ if (page)
+ set_page_private(page, 0);
spin_lock(&info->lock);
if (!page) {
@@ -561,7 +559,7 @@
diroff = 0;
}
subdir = dir[diroff];
- if (subdir && subdir->nr_swapped) {
+ if (subdir && page_private(subdir)) {
size = limit - idx;
if (size > ENTRIES_PER_PAGE)
size = ENTRIES_PER_PAGE;
@@ -572,10 +570,10 @@
nr_swaps_freed += freed;
if (offset)
spin_lock(&info->lock);
- subdir->nr_swapped -= freed;
+ set_page_private(subdir, page_private(subdir) - freed);
if (offset)
spin_unlock(&info->lock);
- BUG_ON(subdir->nr_swapped > offset);
+ BUG_ON(page_private(subdir) > offset);
}
if (offset)
offset = 0;
@@ -743,7 +741,7 @@
dir = shmem_dir_map(subdir);
}
subdir = *dir;
- if (subdir && subdir->nr_swapped) {
+ if (subdir && page_private(subdir)) {
ptr = shmem_swp_map(subdir);
size = limit - idx;
if (size > ENTRIES_PER_PAGE)
@@ -898,7 +896,7 @@
}
static struct page *
-shmem_alloc_page(unsigned long gfp, struct shmem_inode_info *info,
+shmem_alloc_page(gfp_t gfp, struct shmem_inode_info *info,
unsigned long idx)
{
struct vm_area_struct pvma;
@@ -1201,7 +1199,7 @@
page_cache_release(page);
return err;
}
- } else {
+ } else if (vma->vm_flags & VM_NONLINEAR) {
/* No page was found just because we can't read it in
* now (being here implies nonblock != 0), but the page
* may exist, so set the PTE to fault it in later. */
@@ -1506,8 +1504,10 @@
*/
if (!offset)
mark_page_accessed(page);
- } else
+ } else {
page = ZERO_PAGE(0);
+ page_cache_get(page);
+ }
/*
* Ok, we have the page, and it's up-to-date, so
diff --git a/mm/slab.c b/mm/slab.c
index d05c678..22bfb0b2 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -386,7 +386,7 @@
unsigned int gfporder;
/* force GFP flags, e.g. GFP_DMA */
- unsigned int gfpflags;
+ gfp_t gfpflags;
size_t colour; /* cache colouring range */
unsigned int colour_off; /* colour offset */
@@ -2117,7 +2117,7 @@
slabp->free = 0;
}
-static void kmem_flagcheck(kmem_cache_t *cachep, unsigned int flags)
+static void kmem_flagcheck(kmem_cache_t *cachep, gfp_t flags)
{
if (flags & SLAB_DMA) {
if (!(cachep->gfpflags & GFP_DMA))
@@ -2152,7 +2152,7 @@
struct slab *slabp;
void *objp;
size_t offset;
- unsigned int local_flags;
+ gfp_t local_flags;
unsigned long ctor_flags;
struct kmem_list3 *l3;
@@ -2419,6 +2419,7 @@
next = slab_bufctl(slabp)[slabp->free];
#if DEBUG
slab_bufctl(slabp)[slabp->free] = BUFCTL_FREE;
+ WARN_ON(numa_node_id() != slabp->nodeid);
#endif
slabp->free = next;
}
@@ -2546,7 +2547,7 @@
/*
* A interface to enable slab creation on nodeid
*/
-static void *__cache_alloc_node(kmem_cache_t *cachep, int flags, int nodeid)
+static void *__cache_alloc_node(kmem_cache_t *cachep, gfp_t flags, int nodeid)
{
struct list_head *entry;
struct slab *slabp;
@@ -2633,8 +2634,10 @@
check_spinlock_acquired_node(cachep, node);
check_slabp(cachep, slabp);
-
#if DEBUG
+ /* Verify that the slab belongs to the intended node */
+ WARN_ON(slabp->nodeid != node);
+
if (slab_bufctl(slabp)[objnr] != BUFCTL_FREE) {
printk(KERN_ERR "slab: double free detected in cache "
"'%s', objp %p\n", cachep->name, objp);
diff --git a/mm/sparse.c b/mm/sparse.c
index 347249a..72079b5 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -5,8 +5,10 @@
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/bootmem.h>
+#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/vmalloc.h>
#include <asm/dma.h>
/*
@@ -72,6 +74,31 @@
}
#endif
+/*
+ * Although written for the SPARSEMEM_EXTREME case, this happens
+ * to also work for the flat array case becase
+ * NR_SECTION_ROOTS==NR_MEM_SECTIONS.
+ */
+int __section_nr(struct mem_section* ms)
+{
+ unsigned long root_nr;
+ struct mem_section* root;
+
+ for (root_nr = 0;
+ root_nr < NR_MEM_SECTIONS;
+ root_nr += SECTIONS_PER_ROOT) {
+ root = __nr_to_section(root_nr);
+
+ if (!root)
+ continue;
+
+ if ((ms >= root) && (ms < (root + SECTIONS_PER_ROOT)))
+ break;
+ }
+
+ return (root_nr * SECTIONS_PER_ROOT) + (ms - root);
+}
+
/* Record a memory area against a node. */
void memory_present(int nid, unsigned long start, unsigned long end)
{
@@ -162,6 +189,45 @@
return NULL;
}
+static struct page *__kmalloc_section_memmap(unsigned long nr_pages)
+{
+ struct page *page, *ret;
+ unsigned long memmap_size = sizeof(struct page) * nr_pages;
+
+ page = alloc_pages(GFP_KERNEL, get_order(memmap_size));
+ if (page)
+ goto got_map_page;
+
+ ret = vmalloc(memmap_size);
+ if (ret)
+ goto got_map_ptr;
+
+ return NULL;
+got_map_page:
+ ret = (struct page *)pfn_to_kaddr(page_to_pfn(page));
+got_map_ptr:
+ memset(ret, 0, memmap_size);
+
+ return ret;
+}
+
+static int vaddr_in_vmalloc_area(void *addr)
+{
+ if (addr >= (void *)VMALLOC_START &&
+ addr < (void *)VMALLOC_END)
+ return 1;
+ return 0;
+}
+
+static void __kfree_section_memmap(struct page *memmap, unsigned long nr_pages)
+{
+ if (vaddr_in_vmalloc_area(memmap))
+ vfree(memmap);
+ else
+ free_pages((unsigned long)memmap,
+ get_order(sizeof(struct page) * nr_pages));
+}
+
/*
* Allocate the accumulated non-linear sections, allocate a mem_map
* for each and record the physical to section mapping.
@@ -187,14 +253,37 @@
* set. If this is <=0, then that means that the passed-in
* map was not consumed and must be freed.
*/
-int sparse_add_one_section(unsigned long start_pfn, int nr_pages, struct page *map)
+int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+ int nr_pages)
{
- struct mem_section *ms = __pfn_to_section(start_pfn);
+ unsigned long section_nr = pfn_to_section_nr(start_pfn);
+ struct pglist_data *pgdat = zone->zone_pgdat;
+ struct mem_section *ms;
+ struct page *memmap;
+ unsigned long flags;
+ int ret;
- if (ms->section_mem_map & SECTION_MARKED_PRESENT)
- return -EEXIST;
+ /*
+ * no locking for this, because it does its own
+ * plus, it does a kmalloc
+ */
+ sparse_index_init(section_nr, pgdat->node_id);
+ memmap = __kmalloc_section_memmap(nr_pages);
+ pgdat_resize_lock(pgdat, &flags);
+
+ ms = __pfn_to_section(start_pfn);
+ if (ms->section_mem_map & SECTION_MARKED_PRESENT) {
+ ret = -EEXIST;
+ goto out;
+ }
ms->section_mem_map |= SECTION_MARKED_PRESENT;
- return sparse_init_one_section(ms, pfn_to_section_nr(start_pfn), map);
+ ret = sparse_init_one_section(ms, section_nr, memmap);
+
+ if (ret <= 0)
+ __kfree_section_memmap(memmap, nr_pages);
+out:
+ pgdat_resize_unlock(pgdat, &flags);
+ return ret;
}
diff --git a/mm/swap.c b/mm/swap.c
index 7771d28..96387e2 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -39,7 +39,7 @@
void put_page(struct page *page)
{
if (unlikely(PageCompound(page))) {
- page = (struct page *)page->private;
+ page = (struct page *)page_private(page);
if (put_page_testzero(page)) {
void (*dtor)(struct page *page);
@@ -48,7 +48,7 @@
}
return;
}
- if (!PageReserved(page) && put_page_testzero(page))
+ if (put_page_testzero(page))
__page_cache_release(page);
}
EXPORT_SYMBOL(put_page);
@@ -215,7 +215,7 @@
struct page *page = pages[i];
struct zone *pagezone;
- if (PageReserved(page) || !put_page_testzero(page))
+ if (!put_page_testzero(page))
continue;
pagezone = page_zone(page);
@@ -270,7 +270,6 @@
struct pagevec pages_to_free;
pagevec_init(&pages_to_free, pvec->cold);
- pages_to_free.cold = pvec->cold;
for (i = 0; i < pagevec_count(pvec); i++) {
struct page *page = pvec->pages[i];
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 132164f..dfd9a46 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -83,7 +83,7 @@
page_cache_get(page);
SetPageLocked(page);
SetPageSwapCache(page);
- page->private = entry.val;
+ set_page_private(page, entry.val);
total_swapcache_pages++;
pagecache_acct(1);
}
@@ -126,8 +126,8 @@
BUG_ON(PageWriteback(page));
BUG_ON(PagePrivate(page));
- radix_tree_delete(&swapper_space.page_tree, page->private);
- page->private = 0;
+ radix_tree_delete(&swapper_space.page_tree, page_private(page));
+ set_page_private(page, 0);
ClearPageSwapCache(page);
total_swapcache_pages--;
pagecache_acct(-1);
@@ -197,7 +197,7 @@
{
swp_entry_t entry;
- entry.val = page->private;
+ entry.val = page_private(page);
write_lock_irq(&swapper_space.tree_lock);
__delete_from_swap_cache(page);
@@ -259,8 +259,7 @@
/*
* Perform a free_page(), also freeing any swap cache associated with
- * this page if it is the last user of the page. Can not do a lock_page,
- * as we are holding the page_table_lock spinlock.
+ * this page if it is the last user of the page.
*/
void free_page_and_swap_cache(struct page *page)
{
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 1dcaeda..8970c0b 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -61,7 +61,7 @@
swp_entry_t entry;
down_read(&swap_unplug_sem);
- entry.val = page->private;
+ entry.val = page_private(page);
if (PageSwapCache(page)) {
struct block_device *bdev = swap_info[swp_type(entry)].bdev;
struct backing_dev_info *bdi;
@@ -69,8 +69,8 @@
/*
* If the page is removed from swapcache from under us (with a
* racy try_to_unuse/swapoff) we need an additional reference
- * count to avoid reading garbage from page->private above. If
- * the WARN_ON triggers during a swapoff it maybe the race
+ * count to avoid reading garbage from page_private(page) above.
+ * If the WARN_ON triggers during a swapoff it maybe the race
* condition and it's harmless. However if it triggers without
* swapoff it signals a problem.
*/
@@ -294,7 +294,7 @@
struct swap_info_struct *p;
swp_entry_t entry;
- entry.val = page->private;
+ entry.val = page_private(page);
p = swap_info_get(entry);
if (p) {
/* Subtract the 1 for the swap cache itself */
@@ -339,7 +339,7 @@
if (page_count(page) != 2) /* 2: us + cache */
return 0;
- entry.val = page->private;
+ entry.val = page_private(page);
p = swap_info_get(entry);
if (!p)
return 0;
@@ -398,17 +398,14 @@
}
/*
- * Always set the resulting pte to be nowrite (the same as COW pages
- * after one process has exited). We don't know just how many PTEs will
- * share this swap entry, so be cautious and let do_wp_page work out
- * what to do if a write is requested later.
- *
- * vma->vm_mm->page_table_lock is held.
+ * No need to decide whether this PTE shares the swap entry with others,
+ * just let do_wp_page work it out if a write is requested later - to
+ * force COW, vm_page_prot omits write permission from any private vma.
*/
static void unuse_pte(struct vm_area_struct *vma, pte_t *pte,
unsigned long addr, swp_entry_t entry, struct page *page)
{
- inc_mm_counter(vma->vm_mm, rss);
+ inc_mm_counter(vma->vm_mm, anon_rss);
get_page(page);
set_pte_at(vma->vm_mm, addr, pte,
pte_mkold(mk_pte(page, vma->vm_page_prot)));
@@ -425,23 +422,25 @@
unsigned long addr, unsigned long end,
swp_entry_t entry, struct page *page)
{
- pte_t *pte;
pte_t swp_pte = swp_entry_to_pte(entry);
+ pte_t *pte;
+ spinlock_t *ptl;
+ int found = 0;
- pte = pte_offset_map(pmd, addr);
+ pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
do {
/*
* swapoff spends a _lot_ of time in this loop!
* Test inline before going to call unuse_pte.
*/
if (unlikely(pte_same(*pte, swp_pte))) {
- unuse_pte(vma, pte, addr, entry, page);
- pte_unmap(pte);
- return 1;
+ unuse_pte(vma, pte++, addr, entry, page);
+ found = 1;
+ break;
}
} while (pte++, addr += PAGE_SIZE, addr != end);
- pte_unmap(pte - 1);
- return 0;
+ pte_unmap_unlock(pte - 1, ptl);
+ return found;
}
static inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,
@@ -523,12 +522,10 @@
down_read(&mm->mmap_sem);
lock_page(page);
}
- spin_lock(&mm->page_table_lock);
for (vma = mm->mmap; vma; vma = vma->vm_next) {
if (vma->anon_vma && unuse_vma(vma, entry, page))
break;
}
- spin_unlock(&mm->page_table_lock);
up_read(&mm->mmap_sem);
/*
* Currently unuse_mm cannot fail, but leave error handling
@@ -1045,7 +1042,7 @@
BUG_ON(!PageLocked(page)); /* It pins the swap_info_struct */
if (PageSwapCache(page)) {
- swp_entry_t entry = { .val = page->private };
+ swp_entry_t entry = { .val = page_private(page) };
struct swap_info_struct *sis;
sis = get_swap_info_struct(swp_type(entry));
diff --git a/mm/thrash.c b/mm/thrash.c
index 11461f7..eff3c18 100644
--- a/mm/thrash.c
+++ b/mm/thrash.c
@@ -19,7 +19,7 @@
struct mm_struct * swap_token_mm = &init_mm;
#define SWAP_TOKEN_CHECK_INTERVAL (HZ * 2)
-#define SWAP_TOKEN_TIMEOUT 0
+#define SWAP_TOKEN_TIMEOUT (300 * HZ)
/*
* Currently disabled; Needs further code to work at HZ * 300.
*/
diff --git a/mm/tiny-shmem.c b/mm/tiny-shmem.c
index c13a216..b58abcf 100644
--- a/mm/tiny-shmem.c
+++ b/mm/tiny-shmem.c
@@ -31,11 +31,14 @@
static int __init init_tmpfs(void)
{
- register_filesystem(&tmpfs_fs_type);
+ BUG_ON(register_filesystem(&tmpfs_fs_type) != 0);
+
#ifdef CONFIG_TMPFS
devfs_mk_dir("shm");
#endif
shm_mnt = kern_mount(&tmpfs_fs_type);
+ BUG_ON(IS_ERR(shm_mnt));
+
return 0;
}
module_init(init_tmpfs)
diff --git a/mm/truncate.c b/mm/truncate.c
index 60c8764..29c18f6 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -13,18 +13,9 @@
#include <linux/pagemap.h>
#include <linux/pagevec.h>
#include <linux/buffer_head.h> /* grr. try_to_release_page,
- block_invalidatepage */
+ do_invalidatepage */
-static int do_invalidatepage(struct page *page, unsigned long offset)
-{
- int (*invalidatepage)(struct page *, unsigned long);
- invalidatepage = page->mapping->a_ops->invalidatepage;
- if (invalidatepage == NULL)
- invalidatepage = block_invalidatepage;
- return (*invalidatepage)(page, offset);
-}
-
static inline void truncate_partial_page(struct page *page, unsigned partial)
{
memclear_highpage_flush(page, partial, PAGE_CACHE_SIZE-partial);
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 1150229..54a90e8 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -5,6 +5,7 @@
* Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
* SMP-safe vmalloc/vfree/ioremap, Tigran Aivazian <tigran@veritas.com>, May 2000
* Major rework to support vmap/vunmap, Christoph Hellwig, SGI, August 2002
+ * Numa awareness, Christoph Lameter, SGI, June 2005
*/
#include <linux/mm.h>
@@ -88,7 +89,7 @@
{
pte_t *pte;
- pte = pte_alloc_kernel(&init_mm, pmd, addr);
+ pte = pte_alloc_kernel(pmd, addr);
if (!pte)
return -ENOMEM;
do {
@@ -146,20 +147,18 @@
BUG_ON(addr >= end);
pgd = pgd_offset_k(addr);
- spin_lock(&init_mm.page_table_lock);
do {
next = pgd_addr_end(addr, end);
err = vmap_pud_range(pgd, addr, next, prot, pages);
if (err)
break;
} while (pgd++, addr = next, addr != end);
- spin_unlock(&init_mm.page_table_lock);
flush_cache_vmap((unsigned long) area->addr, end);
return err;
}
-struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
- unsigned long start, unsigned long end)
+struct vm_struct *__get_vm_area_node(unsigned long size, unsigned long flags,
+ unsigned long start, unsigned long end, int node)
{
struct vm_struct **p, *tmp, *area;
unsigned long align = 1;
@@ -178,7 +177,7 @@
addr = ALIGN(start, align);
size = PAGE_ALIGN(size);
- area = kmalloc(sizeof(*area), GFP_KERNEL);
+ area = kmalloc_node(sizeof(*area), GFP_KERNEL, node);
if (unlikely(!area))
return NULL;
@@ -231,6 +230,12 @@
return NULL;
}
+struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
+ unsigned long start, unsigned long end)
+{
+ return __get_vm_area_node(size, flags, start, end, -1);
+}
+
/**
* get_vm_area - reserve a contingous kernel virtual area
*
@@ -246,6 +251,11 @@
return __get_vm_area(size, flags, VMALLOC_START, VMALLOC_END);
}
+struct vm_struct *get_vm_area_node(unsigned long size, unsigned long flags, int node)
+{
+ return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END, node);
+}
+
/* Caller must hold vmlist_lock */
struct vm_struct *__remove_vm_area(void *addr)
{
@@ -342,7 +352,6 @@
BUG_ON(in_interrupt());
__vunmap(addr, 1);
}
-
EXPORT_SYMBOL(vfree);
/**
@@ -360,7 +369,6 @@
BUG_ON(in_interrupt());
__vunmap(addr, 0);
}
-
EXPORT_SYMBOL(vunmap);
/**
@@ -392,10 +400,10 @@
return area->addr;
}
-
EXPORT_SYMBOL(vmap);
-void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot)
+void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
+ pgprot_t prot, int node)
{
struct page **pages;
unsigned int nr_pages, array_size, i;
@@ -406,9 +414,9 @@
area->nr_pages = nr_pages;
/* Please note that the recursion is strictly bounded. */
if (array_size > PAGE_SIZE)
- pages = __vmalloc(array_size, gfp_mask, PAGE_KERNEL);
+ pages = __vmalloc_node(array_size, gfp_mask, PAGE_KERNEL, node);
else
- pages = kmalloc(array_size, (gfp_mask & ~__GFP_HIGHMEM));
+ pages = kmalloc_node(array_size, (gfp_mask & ~__GFP_HIGHMEM), node);
area->pages = pages;
if (!area->pages) {
remove_vm_area(area->addr);
@@ -418,7 +426,10 @@
memset(area->pages, 0, array_size);
for (i = 0; i < area->nr_pages; i++) {
- area->pages[i] = alloc_page(gfp_mask);
+ if (node < 0)
+ area->pages[i] = alloc_page(gfp_mask);
+ else
+ area->pages[i] = alloc_pages_node(node, gfp_mask, 0);
if (unlikely(!area->pages[i])) {
/* Successfully allocated i pages, free them in __vunmap() */
area->nr_pages = i;
@@ -435,18 +446,25 @@
return NULL;
}
+void *__vmalloc_area(struct vm_struct *area, gfp_t gfp_mask, pgprot_t prot)
+{
+ return __vmalloc_area_node(area, gfp_mask, prot, -1);
+}
+
/**
- * __vmalloc - allocate virtually contiguous memory
+ * __vmalloc_node - allocate virtually contiguous memory
*
* @size: allocation size
* @gfp_mask: flags for the page level allocator
* @prot: protection mask for the allocated pages
+ * @node node to use for allocation or -1
*
* Allocate enough pages to cover @size from the page level
* allocator with @gfp_mask flags. Map them into contiguous
* kernel virtual space, using a pagetable protection of @prot.
*/
-void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
+void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
+ int node)
{
struct vm_struct *area;
@@ -454,13 +472,18 @@
if (!size || (size >> PAGE_SHIFT) > num_physpages)
return NULL;
- area = get_vm_area(size, VM_ALLOC);
+ area = get_vm_area_node(size, VM_ALLOC, node);
if (!area)
return NULL;
- return __vmalloc_area(area, gfp_mask, prot);
+ return __vmalloc_area_node(area, gfp_mask, prot, node);
}
+EXPORT_SYMBOL(__vmalloc_node);
+void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
+{
+ return __vmalloc_node(size, gfp_mask, prot, -1);
+}
EXPORT_SYMBOL(__vmalloc);
/**
@@ -478,9 +501,26 @@
{
return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
}
-
EXPORT_SYMBOL(vmalloc);
+/**
+ * vmalloc_node - allocate memory on a specific node
+ *
+ * @size: allocation size
+ * @node; numa node
+ *
+ * Allocate enough pages to cover @size from the page level
+ * allocator and map them into contiguous kernel virtual space.
+ *
+ * For tight cotrol over page level allocator and protection flags
+ * use __vmalloc() instead.
+ */
+void *vmalloc_node(unsigned long size, int node)
+{
+ return __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL, node);
+}
+EXPORT_SYMBOL(vmalloc_node);
+
#ifndef PAGE_KERNEL_EXEC
# define PAGE_KERNEL_EXEC PAGE_KERNEL
#endif
@@ -515,7 +555,6 @@
{
return __vmalloc(size, GFP_KERNEL, PAGE_KERNEL);
}
-
EXPORT_SYMBOL(vmalloc_32);
long vread(char *buf, char *addr, unsigned long count)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 64f9570..135bf8c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -70,7 +70,7 @@
unsigned int priority;
/* This context's GFP mask */
- unsigned int gfp_mask;
+ gfp_t gfp_mask;
int may_writepage;
@@ -186,7 +186,7 @@
*
* Returns the number of slab objects which we shrunk.
*/
-static int shrink_slab(unsigned long scanned, unsigned int gfp_mask,
+static int shrink_slab(unsigned long scanned, gfp_t gfp_mask,
unsigned long lru_pages)
{
struct shrinker *shrinker;
@@ -417,7 +417,9 @@
* Anonymous process memory has backing store?
* Try to allocate it some swap space here.
*/
- if (PageAnon(page) && !PageSwapCache(page) && sc->may_swap) {
+ if (PageAnon(page) && !PageSwapCache(page)) {
+ if (!sc->may_swap)
+ goto keep_locked;
if (!add_to_swap(page))
goto activate_locked;
}
@@ -519,7 +521,7 @@
#ifdef CONFIG_SWAP
if (PageSwapCache(page)) {
- swp_entry_t swap = { .val = page->private };
+ swp_entry_t swap = { .val = page_private(page) };
__delete_from_swap_cache(page);
write_unlock_irq(&mapping->tree_lock);
swap_free(swap);
@@ -926,7 +928,7 @@
* holds filesystem locks which prevent writeout this might not work, and the
* allocation attempt will fail.
*/
-int try_to_free_pages(struct zone **zones, unsigned int gfp_mask)
+int try_to_free_pages(struct zone **zones, gfp_t gfp_mask)
{
int priority;
int ret = 0;
@@ -1338,7 +1340,7 @@
/*
* Try to free up some pages from this zone through reclaim.
*/
-int zone_reclaim(struct zone *zone, unsigned int gfp_mask, unsigned int order)
+int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
{
struct scan_control sc;
int nr_pages = 1 << order;
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 12b4334..0353206 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -308,12 +308,6 @@
.create = bt_sock_create,
};
-extern int hci_sock_init(void);
-extern int hci_sock_cleanup(void);
-
-extern int bt_sysfs_init(void);
-extern int bt_sysfs_cleanup(void);
-
static int __init bt_init(void)
{
BT_INFO("Core ver %s", VERSION);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 55dc42e..cf0df1c 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -87,7 +87,7 @@
return notifier_chain_unregister(&hci_notifier, nb);
}
-void hci_notify(struct hci_dev *hdev, int event)
+static void hci_notify(struct hci_dev *hdev, int event)
{
notifier_call_chain(&hci_notifier, event, hdev);
}
@@ -1347,7 +1347,7 @@
kfree_skb(skb);
}
-void hci_rx_task(unsigned long arg)
+static void hci_rx_task(unsigned long arg)
{
struct hci_dev *hdev = (struct hci_dev *) arg;
struct sk_buff *skb;
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 32ef797..799e448 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -66,20 +66,20 @@
/* Packet types */
0x10,
/* Events */
- { 0x1000d9fe, 0x0000300c },
+ { 0x1000d9fe, 0x0000b00c },
/* Commands */
{
{ 0x0 },
/* OGF_LINK_CTL */
- { 0xbe000006, 0x00000001, 0x0000, 0x00 },
+ { 0xbe000006, 0x00000001, 0x000000, 0x00 },
/* OGF_LINK_POLICY */
- { 0x00005200, 0x00000000, 0x0000, 0x00 },
+ { 0x00005200, 0x00000000, 0x000000, 0x00 },
/* OGF_HOST_CTL */
- { 0xaab00200, 0x2b402aaa, 0x0154, 0x00 },
+ { 0xaab00200, 0x2b402aaa, 0x020154, 0x00 },
/* OGF_INFO_PARAM */
- { 0x000002be, 0x00000000, 0x0000, 0x00 },
+ { 0x000002be, 0x00000000, 0x000000, 0x00 },
/* OGF_STATUS_PARAM */
- { 0x000000ea, 0x00000000, 0x0000, 0x00 }
+ { 0x000000ea, 0x00000000, 0x000000, 0x00 }
}
};
diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig
index 4e958f7..edfea77 100644
--- a/net/bluetooth/hidp/Kconfig
+++ b/net/bluetooth/hidp/Kconfig
@@ -1,6 +1,6 @@
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && BT_L2CAP
+ depends on BT && BT_L2CAP && (BROKEN || !S390)
select INPUT
help
HIDP (Human Interface Device Protocol) is a transport layer
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index de8af5f..860444a 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -520,7 +520,7 @@
if (session->input) {
input_unregister_device(session->input);
- kfree(session->input);
+ session->input = NULL;
}
up_write(&hidp_session_sem);
@@ -536,6 +536,8 @@
input->private = session;
+ input->name = "Bluetooth HID Boot Protocol Device";
+
input->id.bustype = BUS_BLUETOOTH;
input->id.vendor = req->vendor;
input->id.product = req->product;
@@ -582,16 +584,15 @@
return -ENOTUNIQ;
session = kmalloc(sizeof(struct hidp_session), GFP_KERNEL);
- if (!session)
+ if (!session)
return -ENOMEM;
memset(session, 0, sizeof(struct hidp_session));
- session->input = kmalloc(sizeof(struct input_dev), GFP_KERNEL);
+ session->input = input_allocate_device();
if (!session->input) {
kfree(session);
return -ENOMEM;
}
- memset(session->input, 0, sizeof(struct input_dev));
down_write(&hidp_session_sem);
@@ -651,8 +652,10 @@
__hidp_unlink_session(session);
- if (session->input)
+ if (session->input) {
input_unregister_device(session->input);
+ session->input = NULL; /* don't try to free it here */
+ }
failed:
up_write(&hidp_session_sem);
diff --git a/net/bluetooth/rfcomm/Makefile b/net/bluetooth/rfcomm/Makefile
index aecec45..fe07988 100644
--- a/net/bluetooth/rfcomm/Makefile
+++ b/net/bluetooth/rfcomm/Makefile
@@ -4,5 +4,5 @@
obj-$(CONFIG_BT_RFCOMM) += rfcomm.o
-rfcomm-y := core.o sock.o crc.o
+rfcomm-y := core.o sock.o
rfcomm-$(CONFIG_BT_RFCOMM_TTY) += tty.o
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 35adce6..c3d56ea 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -133,6 +133,49 @@
/* ---- RFCOMM FCS computation ---- */
+/* reversed, 8-bit, poly=0x07 */
+static unsigned char rfcomm_crc_table[256] = {
+ 0x00, 0x91, 0xe3, 0x72, 0x07, 0x96, 0xe4, 0x75,
+ 0x0e, 0x9f, 0xed, 0x7c, 0x09, 0x98, 0xea, 0x7b,
+ 0x1c, 0x8d, 0xff, 0x6e, 0x1b, 0x8a, 0xf8, 0x69,
+ 0x12, 0x83, 0xf1, 0x60, 0x15, 0x84, 0xf6, 0x67,
+
+ 0x38, 0xa9, 0xdb, 0x4a, 0x3f, 0xae, 0xdc, 0x4d,
+ 0x36, 0xa7, 0xd5, 0x44, 0x31, 0xa0, 0xd2, 0x43,
+ 0x24, 0xb5, 0xc7, 0x56, 0x23, 0xb2, 0xc0, 0x51,
+ 0x2a, 0xbb, 0xc9, 0x58, 0x2d, 0xbc, 0xce, 0x5f,
+
+ 0x70, 0xe1, 0x93, 0x02, 0x77, 0xe6, 0x94, 0x05,
+ 0x7e, 0xef, 0x9d, 0x0c, 0x79, 0xe8, 0x9a, 0x0b,
+ 0x6c, 0xfd, 0x8f, 0x1e, 0x6b, 0xfa, 0x88, 0x19,
+ 0x62, 0xf3, 0x81, 0x10, 0x65, 0xf4, 0x86, 0x17,
+
+ 0x48, 0xd9, 0xab, 0x3a, 0x4f, 0xde, 0xac, 0x3d,
+ 0x46, 0xd7, 0xa5, 0x34, 0x41, 0xd0, 0xa2, 0x33,
+ 0x54, 0xc5, 0xb7, 0x26, 0x53, 0xc2, 0xb0, 0x21,
+ 0x5a, 0xcb, 0xb9, 0x28, 0x5d, 0xcc, 0xbe, 0x2f,
+
+ 0xe0, 0x71, 0x03, 0x92, 0xe7, 0x76, 0x04, 0x95,
+ 0xee, 0x7f, 0x0d, 0x9c, 0xe9, 0x78, 0x0a, 0x9b,
+ 0xfc, 0x6d, 0x1f, 0x8e, 0xfb, 0x6a, 0x18, 0x89,
+ 0xf2, 0x63, 0x11, 0x80, 0xf5, 0x64, 0x16, 0x87,
+
+ 0xd8, 0x49, 0x3b, 0xaa, 0xdf, 0x4e, 0x3c, 0xad,
+ 0xd6, 0x47, 0x35, 0xa4, 0xd1, 0x40, 0x32, 0xa3,
+ 0xc4, 0x55, 0x27, 0xb6, 0xc3, 0x52, 0x20, 0xb1,
+ 0xca, 0x5b, 0x29, 0xb8, 0xcd, 0x5c, 0x2e, 0xbf,
+
+ 0x90, 0x01, 0x73, 0xe2, 0x97, 0x06, 0x74, 0xe5,
+ 0x9e, 0x0f, 0x7d, 0xec, 0x99, 0x08, 0x7a, 0xeb,
+ 0x8c, 0x1d, 0x6f, 0xfe, 0x8b, 0x1a, 0x68, 0xf9,
+ 0x82, 0x13, 0x61, 0xf0, 0x85, 0x14, 0x66, 0xf7,
+
+ 0xa8, 0x39, 0x4b, 0xda, 0xaf, 0x3e, 0x4c, 0xdd,
+ 0xa6, 0x37, 0x45, 0xd4, 0xa1, 0x30, 0x42, 0xd3,
+ 0xb4, 0x25, 0x57, 0xc6, 0xb3, 0x22, 0x50, 0xc1,
+ 0xba, 0x2b, 0x59, 0xc8, 0xbd, 0x2c, 0x5e, 0xcf
+};
+
/* CRC on 2 bytes */
#define __crc(data) (rfcomm_crc_table[rfcomm_crc_table[0xff ^ data[0]] ^ data[1]])
diff --git a/net/bluetooth/rfcomm/crc.c b/net/bluetooth/rfcomm/crc.c
deleted file mode 100644
index 1011bc4..0000000
--- a/net/bluetooth/rfcomm/crc.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- RFCOMM implementation for Linux Bluetooth stack (BlueZ).
- Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
- Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-/*
- * RFCOMM FCS calculation.
- *
- * $Id: crc.c,v 1.2 2002/09/21 09:54:32 holtmann Exp $
- */
-
-/* reversed, 8-bit, poly=0x07 */
-unsigned char rfcomm_crc_table[256] = {
- 0x00, 0x91, 0xe3, 0x72, 0x07, 0x96, 0xe4, 0x75,
- 0x0e, 0x9f, 0xed, 0x7c, 0x09, 0x98, 0xea, 0x7b,
- 0x1c, 0x8d, 0xff, 0x6e, 0x1b, 0x8a, 0xf8, 0x69,
- 0x12, 0x83, 0xf1, 0x60, 0x15, 0x84, 0xf6, 0x67,
-
- 0x38, 0xa9, 0xdb, 0x4a, 0x3f, 0xae, 0xdc, 0x4d,
- 0x36, 0xa7, 0xd5, 0x44, 0x31, 0xa0, 0xd2, 0x43,
- 0x24, 0xb5, 0xc7, 0x56, 0x23, 0xb2, 0xc0, 0x51,
- 0x2a, 0xbb, 0xc9, 0x58, 0x2d, 0xbc, 0xce, 0x5f,
-
- 0x70, 0xe1, 0x93, 0x02, 0x77, 0xe6, 0x94, 0x05,
- 0x7e, 0xef, 0x9d, 0x0c, 0x79, 0xe8, 0x9a, 0x0b,
- 0x6c, 0xfd, 0x8f, 0x1e, 0x6b, 0xfa, 0x88, 0x19,
- 0x62, 0xf3, 0x81, 0x10, 0x65, 0xf4, 0x86, 0x17,
-
- 0x48, 0xd9, 0xab, 0x3a, 0x4f, 0xde, 0xac, 0x3d,
- 0x46, 0xd7, 0xa5, 0x34, 0x41, 0xd0, 0xa2, 0x33,
- 0x54, 0xc5, 0xb7, 0x26, 0x53, 0xc2, 0xb0, 0x21,
- 0x5a, 0xcb, 0xb9, 0x28, 0x5d, 0xcc, 0xbe, 0x2f,
-
- 0xe0, 0x71, 0x03, 0x92, 0xe7, 0x76, 0x04, 0x95,
- 0xee, 0x7f, 0x0d, 0x9c, 0xe9, 0x78, 0x0a, 0x9b,
- 0xfc, 0x6d, 0x1f, 0x8e, 0xfb, 0x6a, 0x18, 0x89,
- 0xf2, 0x63, 0x11, 0x80, 0xf5, 0x64, 0x16, 0x87,
-
- 0xd8, 0x49, 0x3b, 0xaa, 0xdf, 0x4e, 0x3c, 0xad,
- 0xd6, 0x47, 0x35, 0xa4, 0xd1, 0x40, 0x32, 0xa3,
- 0xc4, 0x55, 0x27, 0xb6, 0xc3, 0x52, 0x20, 0xb1,
- 0xca, 0x5b, 0x29, 0xb8, 0xcd, 0x5c, 0x2e, 0xbf,
-
- 0x90, 0x01, 0x73, 0xe2, 0x97, 0x06, 0x74, 0xe5,
- 0x9e, 0x0f, 0x7d, 0xec, 0x99, 0x08, 0x7a, 0xeb,
- 0x8c, 0x1d, 0x6f, 0xfe, 0x8b, 0x1a, 0x68, 0xf9,
- 0x82, 0x13, 0x61, 0xf0, 0x85, 0x14, 0x66, 0xf7,
-
- 0xa8, 0x39, 0x4b, 0xda, 0xaf, 0x3e, 0x4c, 0xdd,
- 0xa6, 0x37, 0x45, 0xd4, 0xa1, 0x30, 0x42, 0xd3,
- 0xb4, 0x25, 0x57, 0xc6, 0xb3, 0x22, 0x50, 0xc1,
- 0xba, 0x2b, 0x59, 0xc8, 0xbd, 0x2c, 0x5e, 0xcf
-};
diff --git a/net/core/dev.c b/net/core/dev.c
index a44eeef..8d15415 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2717,6 +2717,20 @@
dev->name);
dev->features &= ~NETIF_F_TSO;
}
+ if (dev->features & NETIF_F_UFO) {
+ if (!(dev->features & NETIF_F_HW_CSUM)) {
+ printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no "
+ "NETIF_F_HW_CSUM feature.\n",
+ dev->name);
+ dev->features &= ~NETIF_F_UFO;
+ }
+ if (!(dev->features & NETIF_F_SG)) {
+ printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no "
+ "NETIF_F_SG feature.\n",
+ dev->name);
+ dev->features &= ~NETIF_F_UFO;
+ }
+ }
/*
* nil rebuild_header routine,
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 404b761..0350586 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -93,6 +93,20 @@
}
+u32 ethtool_op_get_ufo(struct net_device *dev)
+{
+ return (dev->features & NETIF_F_UFO) != 0;
+}
+
+int ethtool_op_set_ufo(struct net_device *dev, u32 data)
+{
+ if (data)
+ dev->features |= NETIF_F_UFO;
+ else
+ dev->features &= ~NETIF_F_UFO;
+ return 0;
+}
+
/* Handlers for each ethtool command */
static int ethtool_get_settings(struct net_device *dev, void __user *useraddr)
@@ -483,6 +497,11 @@
return err;
}
+ if (!data && dev->ethtool_ops->set_ufo) {
+ err = dev->ethtool_ops->set_ufo(dev, 0);
+ if (err)
+ return err;
+ }
return dev->ethtool_ops->set_sg(dev, data);
}
@@ -569,6 +588,32 @@
return dev->ethtool_ops->set_tso(dev, edata.data);
}
+static int ethtool_get_ufo(struct net_device *dev, char __user *useraddr)
+{
+ struct ethtool_value edata = { ETHTOOL_GTSO };
+
+ if (!dev->ethtool_ops->get_ufo)
+ return -EOPNOTSUPP;
+ edata.data = dev->ethtool_ops->get_ufo(dev);
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+}
+static int ethtool_set_ufo(struct net_device *dev, char __user *useraddr)
+{
+ struct ethtool_value edata;
+
+ if (!dev->ethtool_ops->set_ufo)
+ return -EOPNOTSUPP;
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+ if (edata.data && !(dev->features & NETIF_F_SG))
+ return -EINVAL;
+ if (edata.data && !(dev->features & NETIF_F_HW_CSUM))
+ return -EINVAL;
+ return dev->ethtool_ops->set_ufo(dev, edata.data);
+}
+
static int ethtool_self_test(struct net_device *dev, char __user *useraddr)
{
struct ethtool_test test;
@@ -854,6 +899,12 @@
case ETHTOOL_GPERMADDR:
rc = ethtool_get_perm_addr(dev, useraddr);
break;
+ case ETHTOOL_GUFO:
+ rc = ethtool_get_ufo(dev, useraddr);
+ break;
+ case ETHTOOL_SUFO:
+ rc = ethtool_set_ufo(dev, useraddr);
+ break;
default:
rc = -EOPNOTSUPP;
}
@@ -882,3 +933,5 @@
EXPORT_SYMBOL(ethtool_op_set_tso);
EXPORT_SYMBOL(ethtool_op_set_tx_csum);
EXPORT_SYMBOL(ethtool_op_set_tx_hw_csum);
+EXPORT_SYMBOL(ethtool_op_set_ufo);
+EXPORT_SYMBOL(ethtool_op_get_ufo);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 1dcf7fa..e68700f 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1625,12 +1625,9 @@
memset(&ndst, 0, sizeof(ndst));
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ for_each_cpu(cpu) {
struct neigh_statistics *st;
- if (!cpu_possible(cpu))
- continue;
-
st = per_cpu_ptr(tbl->stats, cpu);
ndst.ndts_allocs += st->allocs;
ndst.ndts_destroys += st->destroys;
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 5f043d3..7fc3e9e 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -75,7 +75,7 @@
* By design there should only be *one* "controlling" process. In practice
* multiple write accesses gives unpredictable result. Understood by "write"
* to /proc gives result code thats should be read be the "writer".
- * For pratical use this should be no problem.
+ * For practical use this should be no problem.
*
* Note when adding devices to a specific CPU there good idea to also assign
* /proc/irq/XX/smp_affinity so TX-interrupts gets bound to the same CPU.
@@ -96,7 +96,7 @@
* New xmit() return, do_div and misc clean up by Stephen Hemminger
* <shemminger@osdl.org> 040923
*
- * Rany Dunlap fixed u64 printk compiler waring
+ * Randy Dunlap fixed u64 printk compiler waring
*
* Remove FCS from BW calculation. Lennert Buytenhek <buytenh@wantstofly.org>
* New time handling. Lennert Buytenhek <buytenh@wantstofly.org> 041213
@@ -137,6 +137,7 @@
#include <linux/ipv6.h>
#include <linux/udp.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/wait.h>
#include <net/checksum.h>
#include <net/ipv6.h>
@@ -151,7 +152,7 @@
#include <asm/timex.h>
-#define VERSION "pktgen v2.62: Packet Generator for packet performance testing.\n"
+#define VERSION "pktgen v2.63: Packet Generator for packet performance testing.\n"
/* #define PG_DEBUG(a) a */
#define PG_DEBUG(a)
@@ -177,8 +178,8 @@
#define T_REMDEV (1<<3) /* Remove all devs */
/* Locks */
-#define thread_lock() spin_lock(&_thread_lock)
-#define thread_unlock() spin_unlock(&_thread_lock)
+#define thread_lock() down(&pktgen_sem)
+#define thread_unlock() up(&pktgen_sem)
/* If lock -- can be removed after some work */
#define if_lock(t) spin_lock(&(t->if_lock));
@@ -186,7 +187,9 @@
/* Used to help with determining the pkts on receive */
#define PKTGEN_MAGIC 0xbe9be955
-#define PG_PROC_DIR "net/pktgen"
+#define PG_PROC_DIR "pktgen"
+#define PGCTRL "pgctrl"
+static struct proc_dir_entry *pg_proc_dir = NULL;
#define MAX_CFLOWS 65536
@@ -202,11 +205,8 @@
* Try to keep frequent/infrequent used vars. separated.
*/
- char ifname[32];
- struct proc_dir_entry *proc_ent;
+ char ifname[IFNAMSIZ];
char result[512];
- /* proc file names */
- char fname[80];
struct pktgen_thread* pg_thread; /* the owner */
struct pktgen_dev *next; /* Used for chaining in the thread's run-queue */
@@ -244,7 +244,7 @@
__u32 seq_num;
int clone_skb; /* Use multiple SKBs during packet gen. If this number
- * is greater than 1, then that many coppies of the same
+ * is greater than 1, then that many copies of the same
* packet will be sent before a new packet is allocated.
* For instance, if you want to send 1024 identical packets
* before creating a new packet, set clone_skb to 1024.
@@ -330,8 +330,6 @@
struct pktgen_dev *if_list; /* All device here */
struct pktgen_thread* next;
char name[32];
- char fname[128]; /* name of proc file */
- struct proc_dir_entry *proc_ent;
char result[512];
u32 max_before_softirq; /* We'll call do_softirq to prevent starvation. */
@@ -396,7 +394,7 @@
/* End of hacks to deal with 64-bit math on x86 */
-/** Convert to miliseconds */
+/** Convert to milliseconds */
static inline __u64 tv_to_ms(const struct timeval* tv)
{
__u64 ms = tv->tv_usec / 1000;
@@ -425,7 +423,7 @@
{
__u64 tmp = n;
/*
- * How do we know if the architectrure we are running on
+ * How do we know if the architecture we are running on
* supports division with 64 bit base?
*
*/
@@ -473,16 +471,6 @@
static char version[] __initdata = VERSION;
-static ssize_t proc_pgctrl_read(struct file* file, char __user * buf, size_t count, loff_t *ppos);
-static ssize_t proc_pgctrl_write(struct file* file, const char __user * buf, size_t count, loff_t *ppos);
-static int proc_if_read(char *buf , char **start, off_t offset, int len, int *eof, void *data);
-
-static int proc_thread_read(char *buf , char **start, off_t offset, int len, int *eof, void *data);
-static int proc_if_write(struct file *file, const char __user *user_buffer, unsigned long count, void *data);
-static int proc_thread_write(struct file *file, const char __user *user_buffer, unsigned long count, void *data);
-static int create_proc_dir(void);
-static int remove_proc_dir(void);
-
static int pktgen_remove_device(struct pktgen_thread* t, struct pktgen_dev *i);
static int pktgen_add_device(struct pktgen_thread* t, const char* ifname);
static struct pktgen_thread* pktgen_find_thread(const char* name);
@@ -503,83 +491,41 @@
static int pg_clone_skb_d = 0;
static int debug = 0;
-static DEFINE_SPINLOCK(_thread_lock);
+static DECLARE_MUTEX(pktgen_sem);
static struct pktgen_thread *pktgen_threads = NULL;
-static char module_fname[128];
-static struct proc_dir_entry *module_proc_ent = NULL;
-
static struct notifier_block pktgen_notifier_block = {
.notifier_call = pktgen_device_event,
};
-static struct file_operations pktgen_fops = {
- .read = proc_pgctrl_read,
- .write = proc_pgctrl_write,
- /* .ioctl = pktgen_ioctl, later maybe */
-};
-
/*
* /proc handling functions
*
*/
-static struct proc_dir_entry *pg_proc_dir = NULL;
-static int proc_pgctrl_read_eof=0;
-
-static ssize_t proc_pgctrl_read(struct file* file, char __user * buf,
- size_t count, loff_t *ppos)
+static int pgctrl_show(struct seq_file *seq, void *v)
{
- char data[200];
- int len = 0;
-
- if(proc_pgctrl_read_eof) {
- proc_pgctrl_read_eof=0;
- len = 0;
- goto out;
- }
-
- sprintf(data, "%s", VERSION);
-
- len = strlen(data);
-
- if(len > count) {
- len =-EFAULT;
- goto out;
- }
-
- if (copy_to_user(buf, data, len)) {
- len =-EFAULT;
- goto out;
- }
-
- *ppos += len;
- proc_pgctrl_read_eof=1; /* EOF next call */
-
- out:
- return len;
+ seq_puts(seq, VERSION);
+ return 0;
}
-static ssize_t proc_pgctrl_write(struct file* file,const char __user * buf,
- size_t count, loff_t *ppos)
+static ssize_t pgctrl_write(struct file* file,const char __user * buf,
+ size_t count, loff_t *ppos)
{
- char *data = NULL;
int err = 0;
+ char data[128];
if (!capable(CAP_NET_ADMIN)){
err = -EPERM;
goto out;
}
- data = (void*)vmalloc ((unsigned int)count);
+ if (count > sizeof(data))
+ count = sizeof(data);
- if(!data) {
- err = -ENOMEM;
- goto out;
- }
if (copy_from_user(data, buf, count)) {
- err =-EFAULT;
- goto out_free;
+ err = -EFAULT;
+ goto out;
}
data[count-1] = 0; /* Make string */
@@ -594,31 +540,40 @@
err = count;
- out_free:
- vfree (data);
out:
return err;
}
-static int proc_if_read(char *buf , char **start, off_t offset,
- int len, int *eof, void *data)
+static int pgctrl_open(struct inode *inode, struct file *file)
{
- char *p;
+ return single_open(file, pgctrl_show, PDE(inode)->data);
+}
+
+static struct file_operations pktgen_fops = {
+ .owner = THIS_MODULE,
+ .open = pgctrl_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = pgctrl_write,
+ .release = single_release,
+};
+
+static int pktgen_if_show(struct seq_file *seq, void *v)
+{
int i;
- struct pktgen_dev *pkt_dev = (struct pktgen_dev*)(data);
+ struct pktgen_dev *pkt_dev = seq->private;
__u64 sa;
__u64 stopped;
__u64 now = getCurUs();
- p = buf;
- p += sprintf(p, "Params: count %llu min_pkt_size: %u max_pkt_size: %u\n",
- (unsigned long long) pkt_dev->count,
- pkt_dev->min_pkt_size, pkt_dev->max_pkt_size);
+ seq_printf(seq, "Params: count %llu min_pkt_size: %u max_pkt_size: %u\n",
+ (unsigned long long) pkt_dev->count,
+ pkt_dev->min_pkt_size, pkt_dev->max_pkt_size);
- p += sprintf(p, " frags: %d delay: %u clone_skb: %d ifname: %s\n",
- pkt_dev->nfrags, 1000*pkt_dev->delay_us+pkt_dev->delay_ns, pkt_dev->clone_skb, pkt_dev->ifname);
+ seq_printf(seq, " frags: %d delay: %u clone_skb: %d ifname: %s\n",
+ pkt_dev->nfrags, 1000*pkt_dev->delay_us+pkt_dev->delay_ns, pkt_dev->clone_skb, pkt_dev->ifname);
- p += sprintf(p, " flows: %u flowlen: %u\n", pkt_dev->cflows, pkt_dev->lflow);
+ seq_printf(seq, " flows: %u flowlen: %u\n", pkt_dev->cflows, pkt_dev->lflow);
if(pkt_dev->flags & F_IPV6) {
@@ -626,19 +581,19 @@
fmt_ip6(b1, pkt_dev->in6_saddr.s6_addr);
fmt_ip6(b2, pkt_dev->min_in6_saddr.s6_addr);
fmt_ip6(b3, pkt_dev->max_in6_saddr.s6_addr);
- p += sprintf(p, " saddr: %s min_saddr: %s max_saddr: %s\n", b1, b2, b3);
+ seq_printf(seq, " saddr: %s min_saddr: %s max_saddr: %s\n", b1, b2, b3);
fmt_ip6(b1, pkt_dev->in6_daddr.s6_addr);
fmt_ip6(b2, pkt_dev->min_in6_daddr.s6_addr);
fmt_ip6(b3, pkt_dev->max_in6_daddr.s6_addr);
- p += sprintf(p, " daddr: %s min_daddr: %s max_daddr: %s\n", b1, b2, b3);
+ seq_printf(seq, " daddr: %s min_daddr: %s max_daddr: %s\n", b1, b2, b3);
}
else
- p += sprintf(p, " dst_min: %s dst_max: %s\n src_min: %s src_max: %s\n",
- pkt_dev->dst_min, pkt_dev->dst_max, pkt_dev->src_min, pkt_dev->src_max);
+ seq_printf(seq," dst_min: %s dst_max: %s\n src_min: %s src_max: %s\n",
+ pkt_dev->dst_min, pkt_dev->dst_max, pkt_dev->src_min, pkt_dev->src_max);
- p += sprintf(p, " src_mac: ");
+ seq_puts(seq, " src_mac: ");
if ((pkt_dev->src_mac[0] == 0) &&
(pkt_dev->src_mac[1] == 0) &&
@@ -648,89 +603,89 @@
(pkt_dev->src_mac[5] == 0))
for (i = 0; i < 6; i++)
- p += sprintf(p, "%02X%s", pkt_dev->odev->dev_addr[i], i == 5 ? " " : ":");
+ seq_printf(seq, "%02X%s", pkt_dev->odev->dev_addr[i], i == 5 ? " " : ":");
else
for (i = 0; i < 6; i++)
- p += sprintf(p, "%02X%s", pkt_dev->src_mac[i], i == 5 ? " " : ":");
+ seq_printf(seq, "%02X%s", pkt_dev->src_mac[i], i == 5 ? " " : ":");
- p += sprintf(p, "dst_mac: ");
+ seq_printf(seq, "dst_mac: ");
for (i = 0; i < 6; i++)
- p += sprintf(p, "%02X%s", pkt_dev->dst_mac[i], i == 5 ? "\n" : ":");
+ seq_printf(seq, "%02X%s", pkt_dev->dst_mac[i], i == 5 ? "\n" : ":");
- p += sprintf(p, " udp_src_min: %d udp_src_max: %d udp_dst_min: %d udp_dst_max: %d\n",
- pkt_dev->udp_src_min, pkt_dev->udp_src_max, pkt_dev->udp_dst_min,
- pkt_dev->udp_dst_max);
+ seq_printf(seq, " udp_src_min: %d udp_src_max: %d udp_dst_min: %d udp_dst_max: %d\n",
+ pkt_dev->udp_src_min, pkt_dev->udp_src_max, pkt_dev->udp_dst_min,
+ pkt_dev->udp_dst_max);
- p += sprintf(p, " src_mac_count: %d dst_mac_count: %d \n Flags: ",
- pkt_dev->src_mac_count, pkt_dev->dst_mac_count);
+ seq_printf(seq, " src_mac_count: %d dst_mac_count: %d \n Flags: ",
+ pkt_dev->src_mac_count, pkt_dev->dst_mac_count);
if (pkt_dev->flags & F_IPV6)
- p += sprintf(p, "IPV6 ");
+ seq_printf(seq, "IPV6 ");
if (pkt_dev->flags & F_IPSRC_RND)
- p += sprintf(p, "IPSRC_RND ");
+ seq_printf(seq, "IPSRC_RND ");
if (pkt_dev->flags & F_IPDST_RND)
- p += sprintf(p, "IPDST_RND ");
+ seq_printf(seq, "IPDST_RND ");
if (pkt_dev->flags & F_TXSIZE_RND)
- p += sprintf(p, "TXSIZE_RND ");
+ seq_printf(seq, "TXSIZE_RND ");
if (pkt_dev->flags & F_UDPSRC_RND)
- p += sprintf(p, "UDPSRC_RND ");
+ seq_printf(seq, "UDPSRC_RND ");
if (pkt_dev->flags & F_UDPDST_RND)
- p += sprintf(p, "UDPDST_RND ");
+ seq_printf(seq, "UDPDST_RND ");
if (pkt_dev->flags & F_MACSRC_RND)
- p += sprintf(p, "MACSRC_RND ");
+ seq_printf(seq, "MACSRC_RND ");
if (pkt_dev->flags & F_MACDST_RND)
- p += sprintf(p, "MACDST_RND ");
+ seq_printf(seq, "MACDST_RND ");
- p += sprintf(p, "\n");
+ seq_puts(seq, "\n");
sa = pkt_dev->started_at;
stopped = pkt_dev->stopped_at;
if (pkt_dev->running)
stopped = now; /* not really stopped, more like last-running-at */
- p += sprintf(p, "Current:\n pkts-sofar: %llu errors: %llu\n started: %lluus stopped: %lluus idle: %lluus\n",
- (unsigned long long) pkt_dev->sofar,
- (unsigned long long) pkt_dev->errors,
- (unsigned long long) sa,
- (unsigned long long) stopped,
- (unsigned long long) pkt_dev->idle_acc);
+ seq_printf(seq, "Current:\n pkts-sofar: %llu errors: %llu\n started: %lluus stopped: %lluus idle: %lluus\n",
+ (unsigned long long) pkt_dev->sofar,
+ (unsigned long long) pkt_dev->errors,
+ (unsigned long long) sa,
+ (unsigned long long) stopped,
+ (unsigned long long) pkt_dev->idle_acc);
- p += sprintf(p, " seq_num: %d cur_dst_mac_offset: %d cur_src_mac_offset: %d\n",
- pkt_dev->seq_num, pkt_dev->cur_dst_mac_offset, pkt_dev->cur_src_mac_offset);
+ seq_printf(seq, " seq_num: %d cur_dst_mac_offset: %d cur_src_mac_offset: %d\n",
+ pkt_dev->seq_num, pkt_dev->cur_dst_mac_offset,
+ pkt_dev->cur_src_mac_offset);
if(pkt_dev->flags & F_IPV6) {
char b1[128], b2[128];
fmt_ip6(b1, pkt_dev->cur_in6_daddr.s6_addr);
fmt_ip6(b2, pkt_dev->cur_in6_saddr.s6_addr);
- p += sprintf(p, " cur_saddr: %s cur_daddr: %s\n", b2, b1);
+ seq_printf(seq, " cur_saddr: %s cur_daddr: %s\n", b2, b1);
}
else
- p += sprintf(p, " cur_saddr: 0x%x cur_daddr: 0x%x\n",
- pkt_dev->cur_saddr, pkt_dev->cur_daddr);
+ seq_printf(seq, " cur_saddr: 0x%x cur_daddr: 0x%x\n",
+ pkt_dev->cur_saddr, pkt_dev->cur_daddr);
- p += sprintf(p, " cur_udp_dst: %d cur_udp_src: %d\n",
- pkt_dev->cur_udp_dst, pkt_dev->cur_udp_src);
+ seq_printf(seq, " cur_udp_dst: %d cur_udp_src: %d\n",
+ pkt_dev->cur_udp_dst, pkt_dev->cur_udp_src);
- p += sprintf(p, " flows: %u\n", pkt_dev->nflows);
+ seq_printf(seq, " flows: %u\n", pkt_dev->nflows);
if (pkt_dev->result[0])
- p += sprintf(p, "Result: %s\n", pkt_dev->result);
+ seq_printf(seq, "Result: %s\n", pkt_dev->result);
else
- p += sprintf(p, "Result: Idle\n");
- *eof = 1;
+ seq_printf(seq, "Result: Idle\n");
- return p - buf;
+ return 0;
}
@@ -802,13 +757,14 @@
return i;
}
-static int proc_if_write(struct file *file, const char __user *user_buffer,
- unsigned long count, void *data)
+static ssize_t pktgen_if_write(struct file *file, const char __user *user_buffer,
+ size_t count, loff_t *offset)
{
+ struct seq_file *seq = (struct seq_file *) file->private_data;
+ struct pktgen_dev *pkt_dev = seq->private;
int i = 0, max, len;
char name[16], valstr[32];
unsigned long value = 0;
- struct pktgen_dev *pkt_dev = (struct pktgen_dev*)(data);
char* pg_result = NULL;
int tmp = 0;
char buf[128];
@@ -849,7 +805,8 @@
if (copy_from_user(tb, user_buffer, count))
return -EFAULT;
tb[count] = 0;
- printk("pktgen: %s,%lu buffer -:%s:-\n", name, count, tb);
+ printk("pktgen: %s,%lu buffer -:%s:-\n", name,
+ (unsigned long) count, tb);
}
if (!strcmp(name, "min_pkt_size")) {
@@ -1335,92 +1292,98 @@
return -EINVAL;
}
-static int proc_thread_read(char *buf , char **start, off_t offset,
- int len, int *eof, void *data)
+static int pktgen_if_open(struct inode *inode, struct file *file)
{
- char *p;
- struct pktgen_thread *t = (struct pktgen_thread*)(data);
+ return single_open(file, pktgen_if_show, PDE(inode)->data);
+}
+
+static struct file_operations pktgen_if_fops = {
+ .owner = THIS_MODULE,
+ .open = pktgen_if_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = pktgen_if_write,
+ .release = single_release,
+};
+
+static int pktgen_thread_show(struct seq_file *seq, void *v)
+{
+ struct pktgen_thread *t = seq->private;
struct pktgen_dev *pkt_dev = NULL;
+ BUG_ON(!t);
- if (!t) {
- printk("pktgen: ERROR: could not find thread in proc_thread_read\n");
- return -EINVAL;
- }
-
- p = buf;
- p += sprintf(p, "Name: %s max_before_softirq: %d\n",
+ seq_printf(seq, "Name: %s max_before_softirq: %d\n",
t->name, t->max_before_softirq);
- p += sprintf(p, "Running: ");
+ seq_printf(seq, "Running: ");
if_lock(t);
for(pkt_dev = t->if_list;pkt_dev; pkt_dev = pkt_dev->next)
if(pkt_dev->running)
- p += sprintf(p, "%s ", pkt_dev->ifname);
+ seq_printf(seq, "%s ", pkt_dev->ifname);
- p += sprintf(p, "\nStopped: ");
+ seq_printf(seq, "\nStopped: ");
for(pkt_dev = t->if_list;pkt_dev; pkt_dev = pkt_dev->next)
if(!pkt_dev->running)
- p += sprintf(p, "%s ", pkt_dev->ifname);
+ seq_printf(seq, "%s ", pkt_dev->ifname);
if (t->result[0])
- p += sprintf(p, "\nResult: %s\n", t->result);
+ seq_printf(seq, "\nResult: %s\n", t->result);
else
- p += sprintf(p, "\nResult: NA\n");
-
- *eof = 1;
+ seq_printf(seq, "\nResult: NA\n");
if_unlock(t);
- return p - buf;
+ return 0;
}
-static int proc_thread_write(struct file *file, const char __user *user_buffer,
- unsigned long count, void *data)
+static ssize_t pktgen_thread_write(struct file *file,
+ const char __user *user_buffer,
+ size_t count, loff_t *offset)
{
+ struct seq_file *seq = (struct seq_file *) file->private_data;
+ struct pktgen_thread *t = seq->private;
int i = 0, max, len, ret;
char name[40];
- struct pktgen_thread *t;
char *pg_result;
unsigned long value = 0;
-
+
if (count < 1) {
// sprintf(pg_result, "Wrong command format");
return -EINVAL;
}
-
+
max = count - i;
len = count_trail_chars(&user_buffer[i], max);
- if (len < 0)
- return len;
-
+ if (len < 0)
+ return len;
+
i += len;
-
+
/* Read variable name */
len = strn_len(&user_buffer[i], sizeof(name) - 1);
- if (len < 0)
- return len;
+ if (len < 0)
+ return len;
memset(name, 0, sizeof(name));
if (copy_from_user(name, &user_buffer[i], len))
return -EFAULT;
i += len;
-
+
max = count -i;
len = count_trail_chars(&user_buffer[i], max);
- if (len < 0)
- return len;
-
+ if (len < 0)
+ return len;
+
i += len;
- if (debug)
- printk("pktgen: t=%s, count=%lu\n", name, count);
-
+ if (debug)
+ printk("pktgen: t=%s, count=%lu\n", name,
+ (unsigned long) count);
- t = (struct pktgen_thread*)(data);
if(!t) {
printk("pktgen: ERROR: No thread\n");
ret = -EINVAL;
@@ -1474,21 +1437,19 @@
return ret;
}
-static int create_proc_dir(void)
+static int pktgen_thread_open(struct inode *inode, struct file *file)
{
- pg_proc_dir = proc_mkdir(PG_PROC_DIR, NULL);
-
- if (!pg_proc_dir)
- return -ENODEV;
-
- return 0;
+ return single_open(file, pktgen_thread_show, PDE(inode)->data);
}
-static int remove_proc_dir(void)
-{
- remove_proc_entry(PG_PROC_DIR, NULL);
- return 0;
-}
+static struct file_operations pktgen_thread_fops = {
+ .owner = THIS_MODULE,
+ .open = pktgen_thread_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = pktgen_thread_write,
+ .release = single_release,
+};
/* Think find or remove for NN */
static struct pktgen_dev *__pktgen_NN_threads(const char* ifname, int remove)
@@ -1702,7 +1663,7 @@
start = now = getCurUs();
printk(KERN_INFO "sleeping for %d\n", (int)(spin_until_us - now));
while (now < spin_until_us) {
- /* TODO: optimise sleeping behavior */
+ /* TODO: optimize sleeping behavior */
if (spin_until_us - now > jiffies_to_usecs(1)+1)
schedule_timeout_interruptible(1);
else if (spin_until_us - now > 100) {
@@ -2361,7 +2322,7 @@
pktgen_stop(t);
t = t->next;
}
- thread_unlock();
+ thread_unlock();
}
static int thread_is_running(struct pktgen_thread *t )
@@ -2552,10 +2513,9 @@
struct pktgen_thread *tmp = pktgen_threads;
- if (strlen(t->fname))
- remove_proc_entry(t->fname, NULL);
+ remove_proc_entry(t->name, pg_proc_dir);
- thread_lock();
+ thread_lock();
if (tmp == t)
pktgen_threads = tmp->next;
@@ -2825,7 +2785,7 @@
if_lock(t);
for(pkt_dev=t->if_list; pkt_dev; pkt_dev = pkt_dev->next ) {
- if (strcmp(pkt_dev->ifname, ifname) == 0) {
+ if (strncmp(pkt_dev->ifname, ifname, IFNAMSIZ) == 0) {
break;
}
}
@@ -2864,74 +2824,70 @@
static int pktgen_add_device(struct pktgen_thread *t, const char* ifname)
{
struct pktgen_dev *pkt_dev;
+ struct proc_dir_entry *pe;
/* We don't allow a device to be on several threads */
- if( (pkt_dev = __pktgen_NN_threads(ifname, FIND)) == NULL) {
-
- pkt_dev = kmalloc(sizeof(struct pktgen_dev), GFP_KERNEL);
- if (!pkt_dev)
- return -ENOMEM;
-
- memset(pkt_dev, 0, sizeof(struct pktgen_dev));
-
- pkt_dev->flows = vmalloc(MAX_CFLOWS*sizeof(struct flow_state));
- if (pkt_dev->flows == NULL) {
- kfree(pkt_dev);
- return -ENOMEM;
- }
- memset(pkt_dev->flows, 0, MAX_CFLOWS*sizeof(struct flow_state));
-
- pkt_dev->min_pkt_size = ETH_ZLEN;
- pkt_dev->max_pkt_size = ETH_ZLEN;
- pkt_dev->nfrags = 0;
- pkt_dev->clone_skb = pg_clone_skb_d;
- pkt_dev->delay_us = pg_delay_d / 1000;
- pkt_dev->delay_ns = pg_delay_d % 1000;
- pkt_dev->count = pg_count_d;
- pkt_dev->sofar = 0;
- pkt_dev->udp_src_min = 9; /* sink port */
- pkt_dev->udp_src_max = 9;
- pkt_dev->udp_dst_min = 9;
- pkt_dev->udp_dst_max = 9;
-
- strncpy(pkt_dev->ifname, ifname, 31);
- sprintf(pkt_dev->fname, "%s/%s", PG_PROC_DIR, ifname);
-
- if (! pktgen_setup_dev(pkt_dev)) {
- printk("pktgen: ERROR: pktgen_setup_dev failed.\n");
- if (pkt_dev->flows)
- vfree(pkt_dev->flows);
- kfree(pkt_dev);
- return -ENODEV;
- }
-
- pkt_dev->proc_ent = create_proc_entry(pkt_dev->fname, 0600, NULL);
- if (!pkt_dev->proc_ent) {
- printk("pktgen: cannot create %s procfs entry.\n", pkt_dev->fname);
- if (pkt_dev->flows)
- vfree(pkt_dev->flows);
- kfree(pkt_dev);
- return -EINVAL;
- }
- pkt_dev->proc_ent->read_proc = proc_if_read;
- pkt_dev->proc_ent->write_proc = proc_if_write;
- pkt_dev->proc_ent->data = (void*)(pkt_dev);
- pkt_dev->proc_ent->owner = THIS_MODULE;
-
- return add_dev_to_thread(t, pkt_dev);
- }
- else {
+ pkt_dev = __pktgen_NN_threads(ifname, FIND);
+ if (pkt_dev) {
printk("pktgen: ERROR: interface already used.\n");
return -EBUSY;
}
+
+ pkt_dev = kzalloc(sizeof(struct pktgen_dev), GFP_KERNEL);
+ if (!pkt_dev)
+ return -ENOMEM;
+
+ pkt_dev->flows = vmalloc(MAX_CFLOWS*sizeof(struct flow_state));
+ if (pkt_dev->flows == NULL) {
+ kfree(pkt_dev);
+ return -ENOMEM;
+ }
+ memset(pkt_dev->flows, 0, MAX_CFLOWS*sizeof(struct flow_state));
+
+ pkt_dev->min_pkt_size = ETH_ZLEN;
+ pkt_dev->max_pkt_size = ETH_ZLEN;
+ pkt_dev->nfrags = 0;
+ pkt_dev->clone_skb = pg_clone_skb_d;
+ pkt_dev->delay_us = pg_delay_d / 1000;
+ pkt_dev->delay_ns = pg_delay_d % 1000;
+ pkt_dev->count = pg_count_d;
+ pkt_dev->sofar = 0;
+ pkt_dev->udp_src_min = 9; /* sink port */
+ pkt_dev->udp_src_max = 9;
+ pkt_dev->udp_dst_min = 9;
+ pkt_dev->udp_dst_max = 9;
+
+ strncpy(pkt_dev->ifname, ifname, IFNAMSIZ);
+
+ if (! pktgen_setup_dev(pkt_dev)) {
+ printk("pktgen: ERROR: pktgen_setup_dev failed.\n");
+ if (pkt_dev->flows)
+ vfree(pkt_dev->flows);
+ kfree(pkt_dev);
+ return -ENODEV;
+ }
+
+ pe = create_proc_entry(ifname, 0600, pg_proc_dir);
+ if (!pe) {
+ printk("pktgen: cannot create %s/%s procfs entry.\n",
+ PG_PROC_DIR, ifname);
+ if (pkt_dev->flows)
+ vfree(pkt_dev->flows);
+ kfree(pkt_dev);
+ return -EINVAL;
+ }
+ pe->proc_fops = &pktgen_if_fops;
+ pe->data = pkt_dev;
+
+ return add_dev_to_thread(t, pkt_dev);
}
static struct pktgen_thread *pktgen_find_thread(const char* name)
{
struct pktgen_thread *t = NULL;
- thread_lock();
+ thread_lock();
t = pktgen_threads;
while (t) {
@@ -2947,6 +2903,7 @@
static int pktgen_create_thread(const char* name, int cpu)
{
struct pktgen_thread *t = NULL;
+ struct proc_dir_entry *pe;
if (strlen(name) > 31) {
printk("pktgen: ERROR: Thread name cannot be more than 31 characters.\n");
@@ -2958,28 +2915,26 @@
return -EINVAL;
}
- t = (struct pktgen_thread*)(kmalloc(sizeof(struct pktgen_thread), GFP_KERNEL));
+ t = kzalloc(sizeof(struct pktgen_thread), GFP_KERNEL);
if (!t) {
printk("pktgen: ERROR: out of memory, can't create new thread.\n");
return -ENOMEM;
}
- memset(t, 0, sizeof(struct pktgen_thread));
strcpy(t->name, name);
spin_lock_init(&t->if_lock);
t->cpu = cpu;
- sprintf(t->fname, "%s/%s", PG_PROC_DIR, t->name);
- t->proc_ent = create_proc_entry(t->fname, 0600, NULL);
- if (!t->proc_ent) {
- printk("pktgen: cannot create %s procfs entry.\n", t->fname);
+ pe = create_proc_entry(t->name, 0600, pg_proc_dir);
+ if (!pe) {
+ printk("pktgen: cannot create %s/%s procfs entry.\n",
+ PG_PROC_DIR, t->name);
kfree(t);
return -EINVAL;
}
- t->proc_ent->read_proc = proc_thread_read;
- t->proc_ent->write_proc = proc_thread_write;
- t->proc_ent->data = (void*)(t);
- t->proc_ent->owner = THIS_MODULE;
+
+ pe->proc_fops = &pktgen_thread_fops;
+ pe->data = t;
t->next = pktgen_threads;
pktgen_threads = t;
@@ -3034,8 +2989,7 @@
/* Clean up proc file system */
- if (strlen(pkt_dev->fname))
- remove_proc_entry(pkt_dev->fname, NULL);
+ remove_proc_entry(pkt_dev->ifname, pg_proc_dir);
if (pkt_dev->flows)
vfree(pkt_dev->flows);
@@ -3046,31 +3000,31 @@
static int __init pg_init(void)
{
int cpu;
+ struct proc_dir_entry *pe;
+
printk(version);
- module_fname[0] = 0;
+ pg_proc_dir = proc_mkdir(PG_PROC_DIR, proc_net);
+ if (!pg_proc_dir)
+ return -ENODEV;
+ pg_proc_dir->owner = THIS_MODULE;
- create_proc_dir();
-
- sprintf(module_fname, "%s/pgctrl", PG_PROC_DIR);
- module_proc_ent = create_proc_entry(module_fname, 0600, NULL);
- if (!module_proc_ent) {
- printk("pktgen: ERROR: cannot create %s procfs entry.\n", module_fname);
+ pe = create_proc_entry(PGCTRL, 0600, pg_proc_dir);
+ if (pe == NULL) {
+ printk("pktgen: ERROR: cannot create %s procfs entry.\n", PGCTRL);
+ proc_net_remove(PG_PROC_DIR);
return -EINVAL;
}
- module_proc_ent->proc_fops = &pktgen_fops;
- module_proc_ent->data = NULL;
+ pe->proc_fops = &pktgen_fops;
+ pe->data = NULL;
/* Register us to receive netdevice events */
register_netdevice_notifier(&pktgen_notifier_block);
- for (cpu = 0; cpu < NR_CPUS ; cpu++) {
+ for_each_online_cpu(cpu) {
char buf[30];
- if (!cpu_online(cpu))
- continue;
-
sprintf(buf, "kpktgend_%i", cpu);
pktgen_create_thread(buf, cpu);
}
@@ -3095,10 +3049,8 @@
unregister_netdevice_notifier(&pktgen_notifier_block);
/* Clean up proc file system */
-
- remove_proc_entry(module_fname, NULL);
-
- remove_proc_dir();
+ remove_proc_entry(PGCTRL, pg_proc_dir);
+ proc_net_remove(PG_PROC_DIR);
}
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 02cd4cd..95501e4 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -122,6 +122,8 @@
* __alloc_skb - allocate a network buffer
* @size: size to allocate
* @gfp_mask: allocation mask
+ * @fclone: allocate from fclone cache instead of head cache
+ * and allocate a cloned (child) skb
*
* Allocate a new &sk_buff. The returned buffer has no headroom and a
* tail room of size bytes. The object has a reference count of one.
@@ -174,6 +176,8 @@
skb_shinfo(skb)->tso_size = 0;
skb_shinfo(skb)->tso_segs = 0;
skb_shinfo(skb)->frag_list = NULL;
+ skb_shinfo(skb)->ufo_size = 0;
+ skb_shinfo(skb)->ip6_frag_id = 0;
out:
return skb;
nodata:
@@ -1694,6 +1698,78 @@
return textsearch_find(config, state);
}
+/**
+ * skb_append_datato_frags: - append the user data to a skb
+ * @sk: sock structure
+ * @skb: skb structure to be appened with user data.
+ * @getfrag: call back function to be used for getting the user data
+ * @from: pointer to user message iov
+ * @length: length of the iov message
+ *
+ * Description: This procedure append the user data in the fragment part
+ * of the skb if any page alloc fails user this procedure returns -ENOMEM
+ */
+int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
+ int getfrag(void *from, char *to, int offset,
+ int len, int odd, struct sk_buff *skb),
+ void *from, int length)
+{
+ int frg_cnt = 0;
+ skb_frag_t *frag = NULL;
+ struct page *page = NULL;
+ int copy, left;
+ int offset = 0;
+ int ret;
+
+ do {
+ /* Return error if we don't have space for new frag */
+ frg_cnt = skb_shinfo(skb)->nr_frags;
+ if (frg_cnt >= MAX_SKB_FRAGS)
+ return -EFAULT;
+
+ /* allocate a new page for next frag */
+ page = alloc_pages(sk->sk_allocation, 0);
+
+ /* If alloc_page fails just return failure and caller will
+ * free previous allocated pages by doing kfree_skb()
+ */
+ if (page == NULL)
+ return -ENOMEM;
+
+ /* initialize the next frag */
+ sk->sk_sndmsg_page = page;
+ sk->sk_sndmsg_off = 0;
+ skb_fill_page_desc(skb, frg_cnt, page, 0, 0);
+ skb->truesize += PAGE_SIZE;
+ atomic_add(PAGE_SIZE, &sk->sk_wmem_alloc);
+
+ /* get the new initialized frag */
+ frg_cnt = skb_shinfo(skb)->nr_frags;
+ frag = &skb_shinfo(skb)->frags[frg_cnt - 1];
+
+ /* copy the user data to page */
+ left = PAGE_SIZE - frag->page_offset;
+ copy = (length > left)? left : length;
+
+ ret = getfrag(from, (page_address(frag->page) +
+ frag->page_offset + frag->size),
+ offset, copy, 0, skb);
+ if (ret < 0)
+ return -EFAULT;
+
+ /* copy was successful so update the size parameters */
+ sk->sk_sndmsg_off += copy;
+ frag->size += copy;
+ skb->len += copy;
+ skb->data_len += copy;
+ offset += copy;
+ length -= copy;
+
+ } while (length > 0);
+
+ return 0;
+}
+
void __init skb_init(void)
{
skbuff_head_cache = kmem_cache_create("skbuff_head_cache",
@@ -1745,3 +1821,4 @@
EXPORT_SYMBOL(skb_seq_read);
EXPORT_SYMBOL(skb_abort_seq_read);
EXPORT_SYMBOL(skb_find_text);
+EXPORT_SYMBOL(skb_append_datato_frags);
diff --git a/net/core/sock.c b/net/core/sock.c
index 1c52fe8..9602ceb 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -940,7 +940,7 @@
int noblock, int *errcode)
{
struct sk_buff *skb;
- unsigned int gfp_mask;
+ gfp_t gfp_mask;
long timeo;
int err;
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 2925074..d59f86f 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -495,7 +495,7 @@
{
struct dccp_sock *dp = dccp_sk(sk);
struct sk_buff *skb;
- const unsigned int prio = active ? GFP_KERNEL : GFP_ATOMIC;
+ const gfp_t prio = active ? GFP_KERNEL : GFP_ATOMIC;
skb = alloc_skb(sk->sk_prot->max_header, prio);
if (skb == NULL)
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 1186dc4..3f25cad 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -719,22 +719,9 @@
if (saddr->sdn_flags & ~SDF_WILD)
return -EINVAL;
-#if 1
if (!capable(CAP_NET_BIND_SERVICE) && (saddr->sdn_objnum ||
(saddr->sdn_flags & SDF_WILD)))
return -EACCES;
-#else
- /*
- * Maybe put the default actions in the default security ops for
- * dn_prot_sock ? Would be nice if the capable call would go there
- * too.
- */
- if (security_dn_prot_sock(saddr) &&
- !capable(CAP_NET_BIND_SERVICE) ||
- saddr->sdn_objnum || (saddr->sdn_flags & SDF_WILD))
- return -EACCES;
-#endif
-
if (!(saddr->sdn_flags & SDF_WILD)) {
if (dn_ntohs(saddr->sdn_nodeaddrl)) {
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 68a5ca8..e245773 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -146,19 +146,6 @@
return 0;
}
-static inline unsigned int compare_eth_addr(const unsigned char *__a, const unsigned char *__b)
-{
- const unsigned short *dest = (unsigned short *) __a;
- const unsigned short *devaddr = (unsigned short *) __b;
- unsigned int res;
-
- BUILD_BUG_ON(ETH_ALEN != 6);
- res = ((dest[0] ^ devaddr[0]) |
- (dest[1] ^ devaddr[1]) |
- (dest[2] ^ devaddr[2])) != 0;
-
- return res;
-}
/*
* Determine the packet's protocol ID. The rule here is that we
@@ -176,7 +163,7 @@
eth = eth_hdr(skb);
if (*eth->h_dest&1) {
- if (!compare_eth_addr(eth->h_dest, dev->broadcast))
+ if (!compare_ether_addr(eth->h_dest, dev->broadcast))
skb->pkt_type = PACKET_BROADCAST;
else
skb->pkt_type = PACKET_MULTICAST;
@@ -191,7 +178,7 @@
*/
else if(1 /*dev->flags&IFF_PROMISC*/) {
- if (unlikely(compare_eth_addr(eth->h_dest, dev->dev_addr)))
+ if (unlikely(compare_ether_addr(eth->h_dest, dev->dev_addr)))
skb->pkt_type = PACKET_OTHERHOST;
}
diff --git a/net/ieee80211/Makefile b/net/ieee80211/Makefile
index a6ccac5..f988417 100644
--- a/net/ieee80211/Makefile
+++ b/net/ieee80211/Makefile
@@ -7,5 +7,6 @@
ieee80211_module.o \
ieee80211_tx.o \
ieee80211_rx.o \
- ieee80211_wx.o
+ ieee80211_wx.o \
+ ieee80211_geo.o
diff --git a/net/ieee80211/ieee80211_crypt.c b/net/ieee80211/ieee80211_crypt.c
index 61a9d92..f3b6aa3 100644
--- a/net/ieee80211/ieee80211_crypt.c
+++ b/net/ieee80211/ieee80211_crypt.c
@@ -41,6 +41,12 @@
{
struct list_head *ptr, *n;
struct ieee80211_crypt_data *entry;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ if (list_empty(&ieee->crypt_deinit_list))
+ goto unlock;
for (ptr = ieee->crypt_deinit_list.next, n = ptr->next;
ptr != &ieee->crypt_deinit_list; ptr = n, n = ptr->next) {
@@ -57,6 +63,18 @@
}
kfree(entry);
}
+ unlock:
+ spin_unlock_irqrestore(&ieee->lock, flags);
+}
+
+/* After this, crypt_deinit_list won't accept new members */
+void ieee80211_crypt_quiescing(struct ieee80211_device *ieee)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ieee->lock, flags);
+ ieee->crypt_quiesced = 1;
+ spin_unlock_irqrestore(&ieee->lock, flags);
}
void ieee80211_crypt_deinit_handler(unsigned long data)
@@ -64,16 +82,16 @@
struct ieee80211_device *ieee = (struct ieee80211_device *)data;
unsigned long flags;
- spin_lock_irqsave(&ieee->lock, flags);
ieee80211_crypt_deinit_entries(ieee, 0);
- if (!list_empty(&ieee->crypt_deinit_list)) {
+
+ spin_lock_irqsave(&ieee->lock, flags);
+ if (!list_empty(&ieee->crypt_deinit_list) && !ieee->crypt_quiesced) {
printk(KERN_DEBUG "%s: entries remaining in delayed crypt "
"deletion list\n", ieee->dev->name);
ieee->crypt_deinit_timer.expires = jiffies + HZ;
add_timer(&ieee->crypt_deinit_timer);
}
spin_unlock_irqrestore(&ieee->lock, flags);
-
}
void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
@@ -93,10 +111,12 @@
* locking. */
spin_lock_irqsave(&ieee->lock, flags);
- list_add(&tmp->list, &ieee->crypt_deinit_list);
- if (!timer_pending(&ieee->crypt_deinit_timer)) {
- ieee->crypt_deinit_timer.expires = jiffies + HZ;
- add_timer(&ieee->crypt_deinit_timer);
+ if (!ieee->crypt_quiesced) {
+ list_add(&tmp->list, &ieee->crypt_deinit_list);
+ if (!timer_pending(&ieee->crypt_deinit_timer)) {
+ ieee->crypt_deinit_timer.expires = jiffies + HZ;
+ add_timer(&ieee->crypt_deinit_timer);
+ }
}
spin_unlock_irqrestore(&ieee->lock, flags);
}
@@ -191,18 +211,18 @@
}
static struct ieee80211_crypto_ops ieee80211_crypt_null = {
- .name = "NULL",
- .init = ieee80211_crypt_null_init,
- .deinit = ieee80211_crypt_null_deinit,
- .encrypt_mpdu = NULL,
- .decrypt_mpdu = NULL,
- .encrypt_msdu = NULL,
- .decrypt_msdu = NULL,
- .set_key = NULL,
- .get_key = NULL,
- .extra_prefix_len = 0,
- .extra_postfix_len = 0,
- .owner = THIS_MODULE,
+ .name = "NULL",
+ .init = ieee80211_crypt_null_init,
+ .deinit = ieee80211_crypt_null_deinit,
+ .encrypt_mpdu = NULL,
+ .decrypt_mpdu = NULL,
+ .encrypt_msdu = NULL,
+ .decrypt_msdu = NULL,
+ .set_key = NULL,
+ .get_key = NULL,
+ .extra_mpdu_prefix_len = 0,
+ .extra_mpdu_postfix_len = 0,
+ .owner = THIS_MODULE,
};
static int __init ieee80211_crypto_init(void)
@@ -249,6 +269,7 @@
EXPORT_SYMBOL(ieee80211_crypt_deinit_entries);
EXPORT_SYMBOL(ieee80211_crypt_deinit_handler);
EXPORT_SYMBOL(ieee80211_crypt_delayed_deinit);
+EXPORT_SYMBOL(ieee80211_crypt_quiescing);
EXPORT_SYMBOL(ieee80211_register_crypto_ops);
EXPORT_SYMBOL(ieee80211_unregister_crypto_ops);
diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c
index 8fc13f4..05a853c 100644
--- a/net/ieee80211/ieee80211_crypt_ccmp.c
+++ b/net/ieee80211/ieee80211_crypt_ccmp.c
@@ -119,7 +119,7 @@
}
static void ccmp_init_blocks(struct crypto_tfm *tfm,
- struct ieee80211_hdr *hdr,
+ struct ieee80211_hdr_4addr *hdr,
u8 * pn, size_t dlen, u8 * b0, u8 * auth, u8 * s0)
{
u8 *pos, qc = 0;
@@ -191,26 +191,18 @@
ieee80211_ccmp_aes_encrypt(tfm, b0, s0);
}
-static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+static int ieee80211_ccmp_hdr(struct sk_buff *skb, int hdr_len, void *priv)
{
struct ieee80211_ccmp_data *key = priv;
- int data_len, i, blocks, last, len;
- u8 *pos, *mic;
- struct ieee80211_hdr *hdr;
- u8 *b0 = key->tx_b0;
- u8 *b = key->tx_b;
- u8 *e = key->tx_e;
- u8 *s0 = key->tx_s0;
+ int i;
+ u8 *pos;
- if (skb_headroom(skb) < CCMP_HDR_LEN ||
- skb_tailroom(skb) < CCMP_MIC_LEN || skb->len < hdr_len)
+ if (skb_headroom(skb) < CCMP_HDR_LEN || skb->len < hdr_len)
return -1;
- data_len = skb->len - hdr_len;
pos = skb_push(skb, CCMP_HDR_LEN);
memmove(pos, pos + CCMP_HDR_LEN, hdr_len);
pos += hdr_len;
- mic = skb_put(skb, CCMP_MIC_LEN);
i = CCMP_PN_LEN - 1;
while (i >= 0) {
@@ -229,7 +221,31 @@
*pos++ = key->tx_pn[1];
*pos++ = key->tx_pn[0];
- hdr = (struct ieee80211_hdr *)skb->data;
+ return CCMP_HDR_LEN;
+}
+
+static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct ieee80211_ccmp_data *key = priv;
+ int data_len, i, blocks, last, len;
+ u8 *pos, *mic;
+ struct ieee80211_hdr_4addr *hdr;
+ u8 *b0 = key->tx_b0;
+ u8 *b = key->tx_b;
+ u8 *e = key->tx_e;
+ u8 *s0 = key->tx_s0;
+
+ if (skb_tailroom(skb) < CCMP_MIC_LEN || skb->len < hdr_len)
+ return -1;
+
+ data_len = skb->len - hdr_len;
+ len = ieee80211_ccmp_hdr(skb, hdr_len, priv);
+ if (len < 0)
+ return -1;
+
+ pos = skb->data + hdr_len + CCMP_HDR_LEN;
+ mic = skb_put(skb, CCMP_MIC_LEN);
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0);
blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
@@ -258,7 +274,7 @@
{
struct ieee80211_ccmp_data *key = priv;
u8 keyidx, *pos;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u8 *b0 = key->rx_b0;
u8 *b = key->rx_b;
u8 *a = key->rx_a;
@@ -272,7 +288,7 @@
return -1;
}
- hdr = (struct ieee80211_hdr *)skb->data;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
pos = skb->data + hdr_len;
keyidx = pos[3];
if (!(keyidx & (1 << 5))) {
@@ -426,19 +442,20 @@
}
static struct ieee80211_crypto_ops ieee80211_crypt_ccmp = {
- .name = "CCMP",
- .init = ieee80211_ccmp_init,
- .deinit = ieee80211_ccmp_deinit,
- .encrypt_mpdu = ieee80211_ccmp_encrypt,
- .decrypt_mpdu = ieee80211_ccmp_decrypt,
- .encrypt_msdu = NULL,
- .decrypt_msdu = NULL,
- .set_key = ieee80211_ccmp_set_key,
- .get_key = ieee80211_ccmp_get_key,
- .print_stats = ieee80211_ccmp_print_stats,
- .extra_prefix_len = CCMP_HDR_LEN,
- .extra_postfix_len = CCMP_MIC_LEN,
- .owner = THIS_MODULE,
+ .name = "CCMP",
+ .init = ieee80211_ccmp_init,
+ .deinit = ieee80211_ccmp_deinit,
+ .build_iv = ieee80211_ccmp_hdr,
+ .encrypt_mpdu = ieee80211_ccmp_encrypt,
+ .decrypt_mpdu = ieee80211_ccmp_decrypt,
+ .encrypt_msdu = NULL,
+ .decrypt_msdu = NULL,
+ .set_key = ieee80211_ccmp_set_key,
+ .get_key = ieee80211_ccmp_get_key,
+ .print_stats = ieee80211_ccmp_print_stats,
+ .extra_mpdu_prefix_len = CCMP_HDR_LEN,
+ .extra_mpdu_postfix_len = CCMP_MIC_LEN,
+ .owner = THIS_MODULE,
};
static int __init ieee80211_crypto_ccmp_init(void)
diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c
index d4f9164..2e34f29 100644
--- a/net/ieee80211/ieee80211_crypt_tkip.c
+++ b/net/ieee80211/ieee80211_crypt_tkip.c
@@ -59,8 +59,24 @@
/* scratch buffers for virt_to_page() (crypto API) */
u8 rx_hdr[16], tx_hdr[16];
+
+ unsigned long flags;
};
+static unsigned long ieee80211_tkip_set_flags(unsigned long flags, void *priv)
+{
+ struct ieee80211_tkip_data *_priv = priv;
+ unsigned long old_flags = _priv->flags;
+ _priv->flags = flags;
+ return old_flags;
+}
+
+static unsigned long ieee80211_tkip_get_flags(void *priv)
+{
+ struct ieee80211_tkip_data *_priv = priv;
+ return _priv->flags;
+}
+
static void *ieee80211_tkip_init(int key_idx)
{
struct ieee80211_tkip_data *priv;
@@ -69,6 +85,7 @@
if (priv == NULL)
goto fail;
memset(priv, 0, sizeof(*priv));
+
priv->key_idx = key_idx;
priv->tfm_arc4 = crypto_alloc_tfm("arc4", 0);
@@ -255,25 +272,27 @@
#endif
}
-static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+static u8 *ieee80211_tkip_hdr(struct sk_buff *skb, int hdr_len, void *priv)
{
struct ieee80211_tkip_data *tkey = priv;
int len;
- u8 rc4key[16], *pos, *icv;
- struct ieee80211_hdr *hdr;
+ u8 *rc4key, *pos, *icv;
+ struct ieee80211_hdr_4addr *hdr;
u32 crc;
- struct scatterlist sg;
- if (skb_headroom(skb) < 8 || skb_tailroom(skb) < 4 ||
- skb->len < hdr_len)
- return -1;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
- hdr = (struct ieee80211_hdr *)skb->data;
+ if (skb_headroom(skb) < 8 || skb->len < hdr_len)
+ return NULL;
+
if (!tkey->tx_phase1_done) {
tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2,
tkey->tx_iv32);
tkey->tx_phase1_done = 1;
}
+ rc4key = kmalloc(16, GFP_ATOMIC);
+ if (!rc4key)
+ return NULL;
tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16);
len = skb->len - hdr_len;
@@ -282,9 +301,9 @@
pos += hdr_len;
icv = skb_put(skb, 4);
- *pos++ = rc4key[0];
- *pos++ = rc4key[1];
- *pos++ = rc4key[2];
+ *pos++ = *rc4key;
+ *pos++ = *(rc4key + 1);
+ *pos++ = *(rc4key + 2);
*pos++ = (tkey->key_idx << 6) | (1 << 5) /* Ext IV included */ ;
*pos++ = tkey->tx_iv32 & 0xff;
*pos++ = (tkey->tx_iv32 >> 8) & 0xff;
@@ -297,6 +316,38 @@
icv[2] = crc >> 16;
icv[3] = crc >> 24;
+ return rc4key;
+}
+
+static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct ieee80211_tkip_data *tkey = priv;
+ int len;
+ const u8 *rc4key;
+ u8 *pos;
+ struct scatterlist sg;
+
+ if (tkey->flags & IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) {
+ if (net_ratelimit()) {
+ struct ieee80211_hdr_4addr *hdr =
+ (struct ieee80211_hdr_4addr *)skb->data;
+ printk(KERN_DEBUG "TKIP countermeasures: dropped "
+ "TX packet to " MAC_FMT "\n",
+ MAC_ARG(hdr->addr1));
+ }
+ return -1;
+ }
+
+ if (skb_tailroom(skb) < 4 || skb->len < hdr_len)
+ return -1;
+
+ len = skb->len - hdr_len;
+ pos = skb->data + hdr_len;
+
+ rc4key = ieee80211_tkip_hdr(skb, hdr_len, priv);
+ if (!rc4key)
+ return -1;
+
crypto_cipher_setkey(tkey->tfm_arc4, rc4key, 16);
sg.page = virt_to_page(pos);
sg.offset = offset_in_page(pos);
@@ -319,16 +370,26 @@
u8 keyidx, *pos;
u32 iv32;
u16 iv16;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
u8 icv[4];
u32 crc;
struct scatterlist sg;
int plen;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+
+ if (tkey->flags & IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "TKIP countermeasures: dropped "
+ "received packet from " MAC_FMT "\n",
+ MAC_ARG(hdr->addr2));
+ }
+ return -1;
+ }
+
if (skb->len < hdr_len + 8 + 4)
return -1;
- hdr = (struct ieee80211_hdr *)skb->data;
pos = skb->data + hdr_len;
keyidx = pos[3];
if (!(keyidx & (1 << 5))) {
@@ -441,9 +502,9 @@
static void michael_mic_hdr(struct sk_buff *skb, u8 * hdr)
{
- struct ieee80211_hdr *hdr11;
+ struct ieee80211_hdr_4addr *hdr11;
- hdr11 = (struct ieee80211_hdr *)skb->data;
+ hdr11 = (struct ieee80211_hdr_4addr *)skb->data;
switch (le16_to_cpu(hdr11->frame_ctl) &
(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
case IEEE80211_FCTL_TODS:
@@ -490,9 +551,9 @@
return 0;
}
-#if WIRELESS_EXT >= 18
static void ieee80211_michael_mic_failure(struct net_device *dev,
- struct ieee80211_hdr *hdr, int keyidx)
+ struct ieee80211_hdr_4addr *hdr,
+ int keyidx)
{
union iwreq_data wrqu;
struct iw_michaelmicfailure ev;
@@ -510,28 +571,6 @@
wrqu.data.length = sizeof(ev);
wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *)&ev);
}
-#elif WIRELESS_EXT >= 15
-static void ieee80211_michael_mic_failure(struct net_device *dev,
- struct ieee80211_hdr *hdr, int keyidx)
-{
- union iwreq_data wrqu;
- char buf[128];
-
- /* TODO: needed parameters: count, keyid, key type, TSC */
- sprintf(buf, "MLME-MICHAELMICFAILURE.indication(keyid=%d %scast addr="
- MAC_FMT ")", keyidx, hdr->addr1[0] & 0x01 ? "broad" : "uni",
- MAC_ARG(hdr->addr2));
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.length = strlen(buf);
- wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
-}
-#else /* WIRELESS_EXT >= 15 */
-static inline void ieee80211_michael_mic_failure(struct net_device *dev,
- struct ieee80211_hdr *hdr,
- int keyidx)
-{
-}
-#endif /* WIRELESS_EXT >= 15 */
static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
int hdr_len, void *priv)
@@ -547,8 +586,8 @@
skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
return -1;
if (memcmp(mic, skb->data + skb->len - 8, 8) != 0) {
- struct ieee80211_hdr *hdr;
- hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_hdr_4addr *hdr;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
printk(KERN_DEBUG "%s: Michael MIC verification failed for "
"MSDU from " MAC_FMT " keyidx=%d\n",
skb->dev ? skb->dev->name : "N/A", MAC_ARG(hdr->addr2),
@@ -654,19 +693,22 @@
}
static struct ieee80211_crypto_ops ieee80211_crypt_tkip = {
- .name = "TKIP",
- .init = ieee80211_tkip_init,
- .deinit = ieee80211_tkip_deinit,
- .encrypt_mpdu = ieee80211_tkip_encrypt,
- .decrypt_mpdu = ieee80211_tkip_decrypt,
- .encrypt_msdu = ieee80211_michael_mic_add,
- .decrypt_msdu = ieee80211_michael_mic_verify,
- .set_key = ieee80211_tkip_set_key,
- .get_key = ieee80211_tkip_get_key,
- .print_stats = ieee80211_tkip_print_stats,
- .extra_prefix_len = 4 + 4, /* IV + ExtIV */
- .extra_postfix_len = 8 + 4, /* MIC + ICV */
- .owner = THIS_MODULE,
+ .name = "TKIP",
+ .init = ieee80211_tkip_init,
+ .deinit = ieee80211_tkip_deinit,
+ .encrypt_mpdu = ieee80211_tkip_encrypt,
+ .decrypt_mpdu = ieee80211_tkip_decrypt,
+ .encrypt_msdu = ieee80211_michael_mic_add,
+ .decrypt_msdu = ieee80211_michael_mic_verify,
+ .set_key = ieee80211_tkip_set_key,
+ .get_key = ieee80211_tkip_get_key,
+ .print_stats = ieee80211_tkip_print_stats,
+ .extra_mpdu_prefix_len = 4 + 4, /* IV + ExtIV */
+ .extra_mpdu_postfix_len = 4, /* ICV */
+ .extra_msdu_postfix_len = 8, /* MIC */
+ .get_flags = ieee80211_tkip_get_flags,
+ .set_flags = ieee80211_tkip_set_flags,
+ .owner = THIS_MODULE,
};
static int __init ieee80211_crypto_tkip_init(void)
diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c
index b4d2514..7c08ed2 100644
--- a/net/ieee80211/ieee80211_crypt_wep.c
+++ b/net/ieee80211/ieee80211_crypt_wep.c
@@ -229,19 +229,19 @@
}
static struct ieee80211_crypto_ops ieee80211_crypt_wep = {
- .name = "WEP",
- .init = prism2_wep_init,
- .deinit = prism2_wep_deinit,
- .encrypt_mpdu = prism2_wep_encrypt,
- .decrypt_mpdu = prism2_wep_decrypt,
- .encrypt_msdu = NULL,
- .decrypt_msdu = NULL,
- .set_key = prism2_wep_set_key,
- .get_key = prism2_wep_get_key,
- .print_stats = prism2_wep_print_stats,
- .extra_prefix_len = 4, /* IV */
- .extra_postfix_len = 4, /* ICV */
- .owner = THIS_MODULE,
+ .name = "WEP",
+ .init = prism2_wep_init,
+ .deinit = prism2_wep_deinit,
+ .encrypt_mpdu = prism2_wep_encrypt,
+ .decrypt_mpdu = prism2_wep_decrypt,
+ .encrypt_msdu = NULL,
+ .decrypt_msdu = NULL,
+ .set_key = prism2_wep_set_key,
+ .get_key = prism2_wep_get_key,
+ .print_stats = prism2_wep_print_stats,
+ .extra_mpdu_prefix_len = 4, /* IV */
+ .extra_mpdu_postfix_len = 4, /* ICV */
+ .owner = THIS_MODULE,
};
static int __init ieee80211_crypto_wep_init(void)
diff --git a/net/ieee80211/ieee80211_geo.c b/net/ieee80211/ieee80211_geo.c
new file mode 100644
index 0000000..c4b54ef
--- /dev/null
+++ b/net/ieee80211/ieee80211_geo.c
@@ -0,0 +1,141 @@
+/******************************************************************************
+
+ Copyright(c) 2005 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+#include <linux/compiler.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <asm/uaccess.h>
+
+#include <net/ieee80211.h>
+
+int ieee80211_is_valid_channel(struct ieee80211_device *ieee, u8 channel)
+{
+ int i;
+
+ /* Driver needs to initialize the geography map before using
+ * these helper functions */
+ BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+
+ if (ieee->freq_band & IEEE80211_24GHZ_BAND)
+ for (i = 0; i < ieee->geo.bg_channels; i++)
+ /* NOTE: If G mode is currently supported but
+ * this is a B only channel, we don't see it
+ * as valid. */
+ if ((ieee->geo.bg[i].channel == channel) &&
+ (!(ieee->mode & IEEE_G) ||
+ !(ieee->geo.bg[i].flags & IEEE80211_CH_B_ONLY)))
+ return IEEE80211_24GHZ_BAND;
+
+ if (ieee->freq_band & IEEE80211_52GHZ_BAND)
+ for (i = 0; i < ieee->geo.a_channels; i++)
+ if (ieee->geo.a[i].channel == channel)
+ return IEEE80211_52GHZ_BAND;
+
+ return 0;
+}
+
+int ieee80211_channel_to_index(struct ieee80211_device *ieee, u8 channel)
+{
+ int i;
+
+ /* Driver needs to initialize the geography map before using
+ * these helper functions */
+ BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+
+ if (ieee->freq_band & IEEE80211_24GHZ_BAND)
+ for (i = 0; i < ieee->geo.bg_channels; i++)
+ if (ieee->geo.bg[i].channel == channel)
+ return i;
+
+ if (ieee->freq_band & IEEE80211_52GHZ_BAND)
+ for (i = 0; i < ieee->geo.a_channels; i++)
+ if (ieee->geo.a[i].channel == channel)
+ return i;
+
+ return -1;
+}
+
+u8 ieee80211_freq_to_channel(struct ieee80211_device * ieee, u32 freq)
+{
+ int i;
+
+ /* Driver needs to initialize the geography map before using
+ * these helper functions */
+ BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+
+ freq /= 100000;
+
+ if (ieee->freq_band & IEEE80211_24GHZ_BAND)
+ for (i = 0; i < ieee->geo.bg_channels; i++)
+ if (ieee->geo.bg[i].freq == freq)
+ return ieee->geo.bg[i].channel;
+
+ if (ieee->freq_band & IEEE80211_52GHZ_BAND)
+ for (i = 0; i < ieee->geo.a_channels; i++)
+ if (ieee->geo.a[i].freq == freq)
+ return ieee->geo.a[i].channel;
+
+ return 0;
+}
+
+int ieee80211_set_geo(struct ieee80211_device *ieee,
+ const struct ieee80211_geo *geo)
+{
+ memcpy(ieee->geo.name, geo->name, 3);
+ ieee->geo.name[3] = '\0';
+ ieee->geo.bg_channels = geo->bg_channels;
+ ieee->geo.a_channels = geo->a_channels;
+ memcpy(ieee->geo.bg, geo->bg, geo->bg_channels *
+ sizeof(struct ieee80211_channel));
+ memcpy(ieee->geo.a, geo->a, ieee->geo.a_channels *
+ sizeof(struct ieee80211_channel));
+ return 0;
+}
+
+const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device *ieee)
+{
+ return &ieee->geo;
+}
+
+EXPORT_SYMBOL(ieee80211_is_valid_channel);
+EXPORT_SYMBOL(ieee80211_freq_to_channel);
+EXPORT_SYMBOL(ieee80211_channel_to_index);
+EXPORT_SYMBOL(ieee80211_set_geo);
+EXPORT_SYMBOL(ieee80211_get_geo);
diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c
index 6059e9e..f66d792 100644
--- a/net/ieee80211/ieee80211_module.c
+++ b/net/ieee80211/ieee80211_module.c
@@ -1,6 +1,6 @@
/*******************************************************************************
- Copyright(c) 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 2004-2005 Intel Corporation. All rights reserved.
Portions of this file are based on the WEP enablement code provided by the
Host AP project hostap-drivers v0.1.3
@@ -53,12 +53,15 @@
#include <net/ieee80211.h>
-MODULE_DESCRIPTION("802.11 data/management/control stack");
-MODULE_AUTHOR
- ("Copyright (C) 2004 Intel Corporation <jketreno@linux.intel.com>");
-MODULE_LICENSE("GPL");
+#define DRV_DESCRIPTION "802.11 data/management/control stack"
+#define DRV_NAME "ieee80211"
+#define DRV_VERSION IEEE80211_VERSION
+#define DRV_COPYRIGHT "Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>"
-#define DRV_NAME "ieee80211"
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
static inline int ieee80211_networks_allocate(struct ieee80211_device *ieee)
{
@@ -126,26 +129,34 @@
/* Default fragmentation threshold is maximum payload size */
ieee->fts = DEFAULT_FTS;
+ ieee->rts = DEFAULT_FTS;
ieee->scan_age = DEFAULT_MAX_SCAN_AGE;
ieee->open_wep = 1;
/* Default to enabling full open WEP with host based encrypt/decrypt */
ieee->host_encrypt = 1;
ieee->host_decrypt = 1;
+ ieee->host_mc_decrypt = 1;
+
+ /* Host fragementation in Open mode. Default is enabled.
+ * Note: host fragmentation is always enabled if host encryption
+ * is enabled. For cards can do hardware encryption, they must do
+ * hardware fragmentation as well. So we don't need a variable
+ * like host_enc_frag. */
+ ieee->host_open_frag = 1;
ieee->ieee802_1x = 1; /* Default to supporting 802.1x */
INIT_LIST_HEAD(&ieee->crypt_deinit_list);
init_timer(&ieee->crypt_deinit_timer);
ieee->crypt_deinit_timer.data = (unsigned long)ieee;
ieee->crypt_deinit_timer.function = ieee80211_crypt_deinit_handler;
+ ieee->crypt_quiesced = 0;
spin_lock_init(&ieee->lock);
ieee->wpa_enabled = 0;
- ieee->tkip_countermeasures = 0;
ieee->drop_unencrypted = 0;
ieee->privacy_invoked = 0;
- ieee->ieee802_1x = 1;
return dev;
@@ -161,6 +172,7 @@
int i;
+ ieee80211_crypt_quiescing(ieee);
del_timer_sync(&ieee->crypt_deinit_timer);
ieee80211_crypt_deinit_entries(ieee, 1);
@@ -195,38 +207,26 @@
static int store_debug_level(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
- char buf[] = "0x00000000";
- char *p = (char *)buf;
+ char buf[] = "0x00000000\n";
+ unsigned long len = min((unsigned long)sizeof(buf) - 1, count);
unsigned long val;
- if (count > sizeof(buf) - 1)
- count = sizeof(buf) - 1;
-
- if (copy_from_user(buf, buffer, count))
+ if (copy_from_user(buf, buffer, len))
return count;
- buf[count] = 0;
- /*
- * what a FPOS... What, sscanf(buf, "%i", &val) would be too
- * scary?
- */
- if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
- p++;
- if (p[0] == 'x' || p[0] == 'X')
- p++;
- val = simple_strtoul(p, &p, 16);
- } else
- val = simple_strtoul(p, &p, 10);
- if (p == buf)
+ buf[len] = 0;
+ if (sscanf(buf, "%li", &val) != 1)
printk(KERN_INFO DRV_NAME
": %s is not in hex or decimal form.\n", buf);
else
ieee80211_debug_level = val;
- return strlen(buf);
+ return strnlen(buf, len);
}
+#endif /* CONFIG_IEEE80211_DEBUG */
static int __init ieee80211_init(void)
{
+#ifdef CONFIG_IEEE80211_DEBUG
struct proc_dir_entry *e;
ieee80211_debug_level = debug;
@@ -246,26 +246,33 @@
e->read_proc = show_debug_level;
e->write_proc = store_debug_level;
e->data = NULL;
+#endif /* CONFIG_IEEE80211_DEBUG */
+
+ printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
+ printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
return 0;
}
static void __exit ieee80211_exit(void)
{
+#ifdef CONFIG_IEEE80211_DEBUG
if (ieee80211_proc) {
remove_proc_entry("debug_level", ieee80211_proc);
remove_proc_entry(DRV_NAME, proc_net);
ieee80211_proc = NULL;
}
+#endif /* CONFIG_IEEE80211_DEBUG */
}
+#ifdef CONFIG_IEEE80211_DEBUG
#include <linux/moduleparam.h>
module_param(debug, int, 0444);
MODULE_PARM_DESC(debug, "debug output mask");
+#endif /* CONFIG_IEEE80211_DEBUG */
module_exit(ieee80211_exit);
module_init(ieee80211_init);
-#endif
const char *escape_essid(const char *essid, u8 essid_len)
{
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index f7dcd85..ce694cf 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -5,7 +5,7 @@
* Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
* <jkmaline@cc.hut.fi>
* Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- * Copyright (c) 2004, Intel Corporation
+ * Copyright (c) 2004-2005, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -87,7 +87,7 @@
/* Called only as a tasklet (software IRQ) */
static struct sk_buff *ieee80211_frag_cache_get(struct ieee80211_device *ieee,
- struct ieee80211_hdr *hdr)
+ struct ieee80211_hdr_4addr *hdr)
{
struct sk_buff *skb = NULL;
u16 sc;
@@ -101,7 +101,7 @@
if (frag == 0) {
/* Reserve enough space to fit maximum frame length */
skb = dev_alloc_skb(ieee->dev->mtu +
- sizeof(struct ieee80211_hdr) +
+ sizeof(struct ieee80211_hdr_4addr) +
8 /* LLC */ +
2 /* alignment */ +
8 /* WEP */ + ETH_ALEN /* WDS */ );
@@ -138,7 +138,7 @@
/* Called only as a tasklet (software IRQ) */
static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
- struct ieee80211_hdr *hdr)
+ struct ieee80211_hdr_4addr *hdr)
{
u16 sc;
unsigned int seq;
@@ -176,7 +176,7 @@
ieee->dev->name);
return 0;
/*
- hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr *)
+ hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr_4addr *)
skb->data);*/
}
@@ -232,13 +232,13 @@
{
struct net_device *dev = ieee->dev;
u16 fc, ethertype;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_3addr *hdr;
u8 *pos;
if (skb->len < 24)
return 0;
- hdr = (struct ieee80211_hdr *)skb->data;
+ hdr = (struct ieee80211_hdr_3addr *)skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
/* check that the frame is unicast frame to us */
@@ -271,26 +271,15 @@
ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_crypt_data *crypt)
{
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_3addr *hdr;
int res, hdrlen;
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
- hdr = (struct ieee80211_hdr *)skb->data;
+ hdr = (struct ieee80211_hdr_3addr *)skb->data;
hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
-#ifdef CONFIG_IEEE80211_CRYPT_TKIP
- if (ieee->tkip_countermeasures && strcmp(crypt->ops->name, "TKIP") == 0) {
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
- "received packet from " MAC_FMT "\n",
- ieee->dev->name, MAC_ARG(hdr->addr2));
- }
- return -1;
- }
-#endif
-
atomic_inc(&crypt->refcnt);
res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
atomic_dec(&crypt->refcnt);
@@ -314,13 +303,13 @@
struct sk_buff *skb, int keyidx,
struct ieee80211_crypt_data *crypt)
{
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_3addr *hdr;
int res, hdrlen;
if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
return 0;
- hdr = (struct ieee80211_hdr *)skb->data;
+ hdr = (struct ieee80211_hdr_3addr *)skb->data;
hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
atomic_inc(&crypt->refcnt);
@@ -343,7 +332,7 @@
struct ieee80211_rx_stats *rx_stats)
{
struct net_device *dev = ieee->dev;
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr_4addr *hdr;
size_t hdrlen;
u16 fc, type, stype, sc;
struct net_device_stats *stats;
@@ -363,7 +352,7 @@
struct ieee80211_crypt_data *crypt = NULL;
int keyidx = 0;
- hdr = (struct ieee80211_hdr *)skb->data;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
if (skb->len < 10) {
@@ -378,35 +367,51 @@
frag = WLAN_GET_SEQ_FRAG(sc);
hdrlen = ieee80211_get_hdrlen(fc);
-#ifdef NOT_YET
-#if WIRELESS_EXT > 15
/* Put this code here so that we avoid duplicating it in all
* Rx paths. - Jean II */
#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
/* If spy monitoring on */
- if (iface->spy_data.spy_number > 0) {
+ if (ieee->spy_data.spy_number > 0) {
struct iw_quality wstats;
- wstats.level = rx_stats->signal;
- wstats.noise = rx_stats->noise;
- wstats.updated = 6; /* No qual value */
+
+ wstats.updated = 0;
+ if (rx_stats->mask & IEEE80211_STATMASK_RSSI) {
+ wstats.level = rx_stats->rssi;
+ wstats.updated |= IW_QUAL_LEVEL_UPDATED;
+ } else
+ wstats.updated |= IW_QUAL_LEVEL_INVALID;
+
+ if (rx_stats->mask & IEEE80211_STATMASK_NOISE) {
+ wstats.noise = rx_stats->noise;
+ wstats.updated |= IW_QUAL_NOISE_UPDATED;
+ } else
+ wstats.updated |= IW_QUAL_NOISE_INVALID;
+
+ if (rx_stats->mask & IEEE80211_STATMASK_SIGNAL) {
+ wstats.qual = rx_stats->signal;
+ wstats.updated |= IW_QUAL_QUAL_UPDATED;
+ } else
+ wstats.updated |= IW_QUAL_QUAL_INVALID;
+
/* Update spy records */
- wireless_spy_update(dev, hdr->addr2, &wstats);
+ wireless_spy_update(ieee->dev, hdr->addr2, &wstats);
}
#endif /* IW_WIRELESS_SPY */
-#endif /* WIRELESS_EXT > 15 */
+
+#ifdef NOT_YET
hostap_update_rx_stats(local->ap, hdr, rx_stats);
#endif
-#if WIRELESS_EXT > 15
if (ieee->iw_mode == IW_MODE_MONITOR) {
ieee80211_monitor_rx(ieee, skb, rx_stats);
stats->rx_packets++;
stats->rx_bytes += skb->len;
return 1;
}
-#endif
- if (ieee->host_decrypt) {
+ if ((is_multicast_ether_addr(hdr->addr1) ||
+ is_broadcast_ether_addr(hdr->addr2)) ? ieee->host_mc_decrypt :
+ ieee->host_decrypt) {
int idx = 0;
if (skb->len >= hdrlen + 3)
idx = skb->data[hdrlen + 3] >> 6;
@@ -531,6 +536,9 @@
/* Nullfunc frames may have PS-bit set, so they must be passed to
* hostap_handle_sta_rx() before being dropped here. */
+
+ stype &= ~IEEE80211_STYPE_QOS_DATA;
+
if (stype != IEEE80211_STYPE_DATA &&
stype != IEEE80211_STYPE_DATA_CFACK &&
stype != IEEE80211_STYPE_DATA_CFPOLL &&
@@ -549,7 +557,7 @@
(keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
goto rx_dropped;
- hdr = (struct ieee80211_hdr *)skb->data;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
/* skb: hdr + (possibly fragmented) plaintext payload */
// PR: FIXME: hostap has additional conditions in the "if" below:
@@ -603,7 +611,7 @@
/* this was the last fragment and the frame will be
* delivered, so remove skb from fragment cache */
skb = frag_skb;
- hdr = (struct ieee80211_hdr *)skb->data;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
ieee80211_frag_cache_invalidate(ieee, hdr);
}
@@ -613,7 +621,7 @@
ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
goto rx_dropped;
- hdr = (struct ieee80211_hdr *)skb->data;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep) {
if ( /*ieee->ieee802_1x && */
ieee80211_is_eapol_frame(ieee, skb)) {
@@ -755,69 +763,179 @@
#define MGMT_FRAME_FIXED_PART_LENGTH 0x24
-static inline int ieee80211_is_ofdm_rate(u8 rate)
+static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
+
+/*
+* Make ther structure we read from the beacon packet has
+* the right values
+*/
+static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element
+ *info_element, int sub_type)
{
- switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
- case IEEE80211_OFDM_RATE_6MB:
- case IEEE80211_OFDM_RATE_9MB:
- case IEEE80211_OFDM_RATE_12MB:
- case IEEE80211_OFDM_RATE_18MB:
- case IEEE80211_OFDM_RATE_24MB:
- case IEEE80211_OFDM_RATE_36MB:
- case IEEE80211_OFDM_RATE_48MB:
- case IEEE80211_OFDM_RATE_54MB:
- return 1;
- }
+
+ if (info_element->qui_subtype != sub_type)
+ return -1;
+ if (memcmp(info_element->qui, qos_oui, QOS_OUI_LEN))
+ return -1;
+ if (info_element->qui_type != QOS_OUI_TYPE)
+ return -1;
+ if (info_element->version != QOS_VERSION_1)
+ return -1;
+
return 0;
}
-static inline int ieee80211_network_init(struct ieee80211_device *ieee,
- struct ieee80211_probe_response
- *beacon,
- struct ieee80211_network *network,
- struct ieee80211_rx_stats *stats)
+/*
+ * Parse a QoS parameter element
+ */
+static int ieee80211_read_qos_param_element(struct ieee80211_qos_parameter_info
+ *element_param, struct ieee80211_info_element
+ *info_element)
{
+ int ret = 0;
+ u16 size = sizeof(struct ieee80211_qos_parameter_info) - 2;
+
+ if ((info_element == NULL) || (element_param == NULL))
+ return -1;
+
+ if (info_element->id == QOS_ELEMENT_ID && info_element->len == size) {
+ memcpy(element_param->info_element.qui, info_element->data,
+ info_element->len);
+ element_param->info_element.elementID = info_element->id;
+ element_param->info_element.length = info_element->len;
+ } else
+ ret = -1;
+ if (ret == 0)
+ ret = ieee80211_verify_qos_info(&element_param->info_element,
+ QOS_OUI_PARAM_SUB_TYPE);
+ return ret;
+}
+
+/*
+ * Parse a QoS information element
+ */
+static int ieee80211_read_qos_info_element(struct
+ ieee80211_qos_information_element
+ *element_info, struct ieee80211_info_element
+ *info_element)
+{
+ int ret = 0;
+ u16 size = sizeof(struct ieee80211_qos_information_element) - 2;
+
+ if (element_info == NULL)
+ return -1;
+ if (info_element == NULL)
+ return -1;
+
+ if ((info_element->id == QOS_ELEMENT_ID) && (info_element->len == size)) {
+ memcpy(element_info->qui, info_element->data,
+ info_element->len);
+ element_info->elementID = info_element->id;
+ element_info->length = info_element->len;
+ } else
+ ret = -1;
+
+ if (ret == 0)
+ ret = ieee80211_verify_qos_info(element_info,
+ QOS_OUI_INFO_SUB_TYPE);
+ return ret;
+}
+
+/*
+ * Write QoS parameters from the ac parameters.
+ */
+static int ieee80211_qos_convert_ac_to_parameters(struct
+ ieee80211_qos_parameter_info
+ *param_elm, struct
+ ieee80211_qos_parameters
+ *qos_param)
+{
+ int rc = 0;
+ int i;
+ struct ieee80211_qos_ac_parameter *ac_params;
+ u32 txop;
+ u8 cw_min;
+ u8 cw_max;
+
+ for (i = 0; i < QOS_QUEUE_NUM; i++) {
+ ac_params = &(param_elm->ac_params_record[i]);
+
+ qos_param->aifs[i] = (ac_params->aci_aifsn) & 0x0F;
+ qos_param->aifs[i] -= (qos_param->aifs[i] < 2) ? 0 : 2;
+
+ cw_min = ac_params->ecw_min_max & 0x0F;
+ qos_param->cw_min[i] = (u16) ((1 << cw_min) - 1);
+
+ cw_max = (ac_params->ecw_min_max & 0xF0) >> 4;
+ qos_param->cw_max[i] = (u16) ((1 << cw_max) - 1);
+
+ qos_param->flag[i] =
+ (ac_params->aci_aifsn & 0x10) ? 0x01 : 0x00;
+
+ txop = le16_to_cpu(ac_params->tx_op_limit) * 32;
+ qos_param->tx_op_limit[i] = (u16) txop;
+ }
+ return rc;
+}
+
+/*
+ * we have a generic data element which it may contain QoS information or
+ * parameters element. check the information element length to decide
+ * which type to read
+ */
+static int ieee80211_parse_qos_info_param_IE(struct ieee80211_info_element
+ *info_element,
+ struct ieee80211_network *network)
+{
+ int rc = 0;
+ struct ieee80211_qos_parameters *qos_param = NULL;
+ struct ieee80211_qos_information_element qos_info_element;
+
+ rc = ieee80211_read_qos_info_element(&qos_info_element, info_element);
+
+ if (rc == 0) {
+ network->qos_data.param_count = qos_info_element.ac_info & 0x0F;
+ network->flags |= NETWORK_HAS_QOS_INFORMATION;
+ } else {
+ struct ieee80211_qos_parameter_info param_element;
+
+ rc = ieee80211_read_qos_param_element(¶m_element,
+ info_element);
+ if (rc == 0) {
+ qos_param = &(network->qos_data.parameters);
+ ieee80211_qos_convert_ac_to_parameters(¶m_element,
+ qos_param);
+ network->flags |= NETWORK_HAS_QOS_PARAMETERS;
+ network->qos_data.param_count =
+ param_element.info_element.ac_info & 0x0F;
+ }
+ }
+
+ if (rc == 0) {
+ IEEE80211_DEBUG_QOS("QoS is supported\n");
+ network->qos_data.supported = 1;
+ }
+ return rc;
+}
+
+static int ieee80211_parse_info_param(struct ieee80211_info_element
+ *info_element, u16 length,
+ struct ieee80211_network *network)
+{
+ u8 i;
#ifdef CONFIG_IEEE80211_DEBUG
char rates_str[64];
char *p;
#endif
- struct ieee80211_info_element *info_element;
- u16 left;
- u8 i;
- /* Pull out fixed field data */
- memcpy(network->bssid, beacon->header.addr3, ETH_ALEN);
- network->capability = beacon->capability;
- network->last_scanned = jiffies;
- network->time_stamp[0] = beacon->time_stamp[0];
- network->time_stamp[1] = beacon->time_stamp[1];
- network->beacon_interval = beacon->beacon_interval;
- /* Where to pull this? beacon->listen_interval; */
- network->listen_interval = 0x0A;
- network->rates_len = network->rates_ex_len = 0;
- network->last_associate = 0;
- network->ssid_len = 0;
- network->flags = 0;
- network->atim_window = 0;
-
- if (stats->freq == IEEE80211_52GHZ_BAND) {
- /* for A band (No DS info) */
- network->channel = stats->received_channel;
- } else
- network->flags |= NETWORK_HAS_CCK;
-
- network->wpa_ie_len = 0;
- network->rsn_ie_len = 0;
-
- info_element = &beacon->info_element;
- left = stats->len - ((void *)info_element - (void *)beacon);
- while (left >= sizeof(struct ieee80211_info_element_hdr)) {
- if (sizeof(struct ieee80211_info_element_hdr) +
- info_element->len > left) {
- IEEE80211_DEBUG_SCAN
- ("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%Zd left=%d.\n",
- info_element->len +
- sizeof(struct ieee80211_info_element), left);
+ while (length >= sizeof(*info_element)) {
+ if (sizeof(*info_element) + info_element->len > length) {
+ IEEE80211_DEBUG_MGMT("Info elem: parse failed: "
+ "info_element->len + 2 > left : "
+ "info_element->len+2=%zd left=%d, id=%d.\n",
+ info_element->len +
+ sizeof(*info_element),
+ length, info_element->id);
return 1;
}
@@ -837,7 +955,7 @@
memset(network->ssid + network->ssid_len, 0,
IW_ESSID_MAX_SIZE - network->ssid_len);
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_SSID: '%s' len=%d.\n",
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_SSID: '%s' len=%d.\n",
network->ssid, network->ssid_len);
break;
@@ -845,15 +963,14 @@
#ifdef CONFIG_IEEE80211_DEBUG
p = rates_str;
#endif
- network->rates_len =
- min(info_element->len, MAX_RATES_LENGTH);
+ network->rates_len = min(info_element->len,
+ MAX_RATES_LENGTH);
for (i = 0; i < network->rates_len; i++) {
network->rates[i] = info_element->data[i];
#ifdef CONFIG_IEEE80211_DEBUG
- p += snprintf(p,
- sizeof(rates_str) - (p -
- rates_str),
- "%02X ", network->rates[i]);
+ p += snprintf(p, sizeof(rates_str) -
+ (p - rates_str), "%02X ",
+ network->rates[i]);
#endif
if (ieee80211_is_ofdm_rate
(info_element->data[i])) {
@@ -865,7 +982,7 @@
}
}
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES: '%s' (%d)\n",
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_RATES: '%s' (%d)\n",
rates_str, network->rates_len);
break;
@@ -873,15 +990,14 @@
#ifdef CONFIG_IEEE80211_DEBUG
p = rates_str;
#endif
- network->rates_ex_len =
- min(info_element->len, MAX_RATES_EX_LENGTH);
+ network->rates_ex_len = min(info_element->len,
+ MAX_RATES_EX_LENGTH);
for (i = 0; i < network->rates_ex_len; i++) {
network->rates_ex[i] = info_element->data[i];
#ifdef CONFIG_IEEE80211_DEBUG
- p += snprintf(p,
- sizeof(rates_str) - (p -
- rates_str),
- "%02X ", network->rates[i]);
+ p += snprintf(p, sizeof(rates_str) -
+ (p - rates_str), "%02X ",
+ network->rates[i]);
#endif
if (ieee80211_is_ofdm_rate
(info_element->data[i])) {
@@ -893,40 +1009,51 @@
}
}
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES_EX: '%s' (%d)\n",
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_RATES_EX: '%s' (%d)\n",
rates_str, network->rates_ex_len);
break;
case MFIE_TYPE_DS_SET:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_DS_SET: %d\n",
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_DS_SET: %d\n",
info_element->data[0]);
- if (stats->freq == IEEE80211_24GHZ_BAND)
- network->channel = info_element->data[0];
+ network->channel = info_element->data[0];
break;
case MFIE_TYPE_FH_SET:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_FH_SET: ignored\n");
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_FH_SET: ignored\n");
break;
case MFIE_TYPE_CF_SET:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_CF_SET: ignored\n");
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_CF_SET: ignored\n");
break;
case MFIE_TYPE_TIM:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_TIM: ignored\n");
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_TIM: ignored\n");
+ break;
+
+ case MFIE_TYPE_ERP_INFO:
+ network->erp_value = info_element->data[0];
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_ERP_SET: %d\n",
+ network->erp_value);
break;
case MFIE_TYPE_IBSS_SET:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_IBSS_SET: ignored\n");
+ network->atim_window = info_element->data[0];
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_IBSS_SET: %d\n",
+ network->atim_window);
break;
case MFIE_TYPE_CHALLENGE:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_CHALLENGE: ignored\n");
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_CHALLENGE: ignored\n");
break;
case MFIE_TYPE_GENERIC:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n",
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_GENERIC: %d bytes\n",
info_element->len);
+ if (!ieee80211_parse_qos_info_param_IE(info_element,
+ network))
+ break;
+
if (info_element->len >= 4 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x50 &&
@@ -940,7 +1067,7 @@
break;
case MFIE_TYPE_RSN:
- IEEE80211_DEBUG_SCAN("MFIE_TYPE_RSN: %d bytes\n",
+ IEEE80211_DEBUG_MGMT("MFIE_TYPE_RSN: %d bytes\n",
info_element->len);
network->rsn_ie_len = min(info_element->len + 2,
MAX_WPA_IE_LEN);
@@ -948,18 +1075,127 @@
network->rsn_ie_len);
break;
+ case MFIE_TYPE_QOS_PARAMETER:
+ printk(KERN_ERR
+ "QoS Error need to parse QOS_PARAMETER IE\n");
+ break;
+
default:
- IEEE80211_DEBUG_SCAN("unsupported IE %d\n",
+ IEEE80211_DEBUG_MGMT("unsupported IE %d\n",
info_element->id);
break;
}
- left -= sizeof(struct ieee80211_info_element_hdr) +
- info_element->len;
- info_element = (struct ieee80211_info_element *)
- &info_element->data[info_element->len];
+ length -= sizeof(*info_element) + info_element->len;
+ info_element =
+ (struct ieee80211_info_element *)&info_element->
+ data[info_element->len];
}
+ return 0;
+}
+
+static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct ieee80211_assoc_response
+ *frame, struct ieee80211_rx_stats *stats)
+{
+ struct ieee80211_network network_resp;
+ struct ieee80211_network *network = &network_resp;
+ struct net_device *dev = ieee->dev;
+
+ network->flags = 0;
+ network->qos_data.active = 0;
+ network->qos_data.supported = 0;
+ network->qos_data.param_count = 0;
+ network->qos_data.old_param_count = 0;
+
+ //network->atim_window = le16_to_cpu(frame->aid) & (0x3FFF);
+ network->atim_window = le16_to_cpu(frame->aid);
+ network->listen_interval = le16_to_cpu(frame->status);
+ memcpy(network->bssid, frame->header.addr3, ETH_ALEN);
+ network->capability = le16_to_cpu(frame->capability);
+ network->last_scanned = jiffies;
+ network->rates_len = network->rates_ex_len = 0;
+ network->last_associate = 0;
+ network->ssid_len = 0;
+ network->erp_value =
+ (network->capability & WLAN_CAPABILITY_IBSS) ? 0x3 : 0x0;
+
+ if (stats->freq == IEEE80211_52GHZ_BAND) {
+ /* for A band (No DS info) */
+ network->channel = stats->received_channel;
+ } else
+ network->flags |= NETWORK_HAS_CCK;
+
+ network->wpa_ie_len = 0;
+ network->rsn_ie_len = 0;
+
+ if (ieee80211_parse_info_param
+ (frame->info_element, stats->len - sizeof(*frame), network))
+ return 1;
+
+ network->mode = 0;
+ if (stats->freq == IEEE80211_52GHZ_BAND)
+ network->mode = IEEE_A;
+ else {
+ if (network->flags & NETWORK_HAS_OFDM)
+ network->mode |= IEEE_G;
+ if (network->flags & NETWORK_HAS_CCK)
+ network->mode |= IEEE_B;
+ }
+
+ if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
+ network->flags |= NETWORK_EMPTY_ESSID;
+
+ memcpy(&network->stats, stats, sizeof(network->stats));
+
+ if (ieee->handle_assoc_response != NULL)
+ ieee->handle_assoc_response(dev, frame, network);
+
+ return 0;
+}
+
+/***************************************************/
+
+static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct ieee80211_probe_response
+ *beacon,
+ struct ieee80211_network *network,
+ struct ieee80211_rx_stats *stats)
+{
+ network->qos_data.active = 0;
+ network->qos_data.supported = 0;
+ network->qos_data.param_count = 0;
+ network->qos_data.old_param_count = 0;
+
+ /* Pull out fixed field data */
+ memcpy(network->bssid, beacon->header.addr3, ETH_ALEN);
+ network->capability = le16_to_cpu(beacon->capability);
+ network->last_scanned = jiffies;
+ network->time_stamp[0] = le32_to_cpu(beacon->time_stamp[0]);
+ network->time_stamp[1] = le32_to_cpu(beacon->time_stamp[1]);
+ network->beacon_interval = le16_to_cpu(beacon->beacon_interval);
+ /* Where to pull this? beacon->listen_interval; */
+ network->listen_interval = 0x0A;
+ network->rates_len = network->rates_ex_len = 0;
+ network->last_associate = 0;
+ network->ssid_len = 0;
+ network->flags = 0;
+ network->atim_window = 0;
+ network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ?
+ 0x3 : 0x0;
+
+ if (stats->freq == IEEE80211_52GHZ_BAND) {
+ /* for A band (No DS info) */
+ network->channel = stats->received_channel;
+ } else
+ network->flags |= NETWORK_HAS_CCK;
+
+ network->wpa_ie_len = 0;
+ network->rsn_ie_len = 0;
+
+ if (ieee80211_parse_info_param
+ (beacon->info_element, stats->len - sizeof(*beacon), network))
+ return 1;
+
network->mode = 0;
if (stats->freq == IEEE80211_52GHZ_BAND)
network->mode = IEEE_A;
@@ -1002,6 +1238,9 @@
static inline void update_network(struct ieee80211_network *dst,
struct ieee80211_network *src)
{
+ int qos_active;
+ u8 old_param;
+
memcpy(&dst->stats, &src->stats, sizeof(struct ieee80211_rx_stats));
dst->capability = src->capability;
memcpy(dst->rates, src->rates, src->rates_len);
@@ -1017,6 +1256,7 @@
dst->beacon_interval = src->beacon_interval;
dst->listen_interval = src->listen_interval;
dst->atim_window = src->atim_window;
+ dst->erp_value = src->erp_value;
memcpy(dst->wpa_ie, src->wpa_ie, src->wpa_ie_len);
dst->wpa_ie_len = src->wpa_ie_len;
@@ -1024,22 +1264,48 @@
dst->rsn_ie_len = src->rsn_ie_len;
dst->last_scanned = jiffies;
+ qos_active = src->qos_data.active;
+ old_param = dst->qos_data.old_param_count;
+ if (dst->flags & NETWORK_HAS_QOS_MASK)
+ memcpy(&dst->qos_data, &src->qos_data,
+ sizeof(struct ieee80211_qos_data));
+ else {
+ dst->qos_data.supported = src->qos_data.supported;
+ dst->qos_data.param_count = src->qos_data.param_count;
+ }
+
+ if (dst->qos_data.supported == 1) {
+ if (dst->ssid_len)
+ IEEE80211_DEBUG_QOS
+ ("QoS the network %s is QoS supported\n",
+ dst->ssid);
+ else
+ IEEE80211_DEBUG_QOS
+ ("QoS the network is QoS supported\n");
+ }
+ dst->qos_data.active = qos_active;
+ dst->qos_data.old_param_count = old_param;
+
/* dst->last_associate is not overwritten */
}
+static inline int is_beacon(int fc)
+{
+ return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == IEEE80211_STYPE_BEACON);
+}
+
static inline void ieee80211_process_probe_response(struct ieee80211_device
- *ieee,
- struct
+ *ieee, struct
ieee80211_probe_response
- *beacon,
- struct ieee80211_rx_stats
+ *beacon, struct ieee80211_rx_stats
*stats)
{
+ struct net_device *dev = ieee->dev;
struct ieee80211_network network;
struct ieee80211_network *target;
struct ieee80211_network *oldest = NULL;
#ifdef CONFIG_IEEE80211_DEBUG
- struct ieee80211_info_element *info_element = &beacon->info_element;
+ struct ieee80211_info_element *info_element = beacon->info_element;
#endif
unsigned long flags;
@@ -1070,10 +1336,10 @@
escape_essid(info_element->data,
info_element->len),
MAC_ARG(beacon->header.addr3),
- WLAN_FC_GET_STYPE(beacon->header.
- frame_ctl) ==
- IEEE80211_STYPE_PROBE_RESP ?
- "PROBE RESPONSE" : "BEACON");
+ is_beacon(le16_to_cpu
+ (beacon->header.
+ frame_ctl)) ?
+ "BEACON" : "PROBE RESPONSE");
return;
}
@@ -1122,10 +1388,10 @@
escape_essid(network.ssid,
network.ssid_len),
MAC_ARG(network.bssid),
- WLAN_FC_GET_STYPE(beacon->header.
- frame_ctl) ==
- IEEE80211_STYPE_PROBE_RESP ?
- "PROBE RESPONSE" : "BEACON");
+ is_beacon(le16_to_cpu
+ (beacon->header.
+ frame_ctl)) ?
+ "BEACON" : "PROBE RESPONSE");
#endif
memcpy(target, &network, sizeof(*target));
list_add_tail(&target->list, &ieee->network_list);
@@ -1134,34 +1400,60 @@
escape_essid(target->ssid,
target->ssid_len),
MAC_ARG(target->bssid),
- WLAN_FC_GET_STYPE(beacon->header.
- frame_ctl) ==
- IEEE80211_STYPE_PROBE_RESP ?
- "PROBE RESPONSE" : "BEACON");
+ is_beacon(le16_to_cpu
+ (beacon->header.
+ frame_ctl)) ?
+ "BEACON" : "PROBE RESPONSE");
update_network(target, &network);
}
spin_unlock_irqrestore(&ieee->lock, flags);
+
+ if (is_beacon(le16_to_cpu(beacon->header.frame_ctl))) {
+ if (ieee->handle_beacon != NULL)
+ ieee->handle_beacon(dev, beacon, &network);
+ } else {
+ if (ieee->handle_probe_response != NULL)
+ ieee->handle_probe_response(dev, beacon, &network);
+ }
}
void ieee80211_rx_mgt(struct ieee80211_device *ieee,
- struct ieee80211_hdr *header,
+ struct ieee80211_hdr_4addr *header,
struct ieee80211_rx_stats *stats)
{
- switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
+ switch (WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl))) {
case IEEE80211_STYPE_ASSOC_RESP:
IEEE80211_DEBUG_MGMT("received ASSOCIATION RESPONSE (%d)\n",
- WLAN_FC_GET_STYPE(header->frame_ctl));
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
+ ieee80211_handle_assoc_resp(ieee,
+ (struct ieee80211_assoc_response *)
+ header, stats);
break;
case IEEE80211_STYPE_REASSOC_RESP:
IEEE80211_DEBUG_MGMT("received REASSOCIATION RESPONSE (%d)\n",
- WLAN_FC_GET_STYPE(header->frame_ctl));
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
+ break;
+
+ case IEEE80211_STYPE_PROBE_REQ:
+ IEEE80211_DEBUG_MGMT("recieved auth (%d)\n",
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
+
+ if (ieee->handle_probe_request != NULL)
+ ieee->handle_probe_request(ieee->dev,
+ (struct
+ ieee80211_probe_request *)
+ header, stats);
break;
case IEEE80211_STYPE_PROBE_RESP:
IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
- WLAN_FC_GET_STYPE(header->frame_ctl));
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
IEEE80211_DEBUG_SCAN("Probe response\n");
ieee80211_process_probe_response(ieee,
(struct
@@ -1171,20 +1463,46 @@
case IEEE80211_STYPE_BEACON:
IEEE80211_DEBUG_MGMT("received BEACON (%d)\n",
- WLAN_FC_GET_STYPE(header->frame_ctl));
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
IEEE80211_DEBUG_SCAN("Beacon\n");
ieee80211_process_probe_response(ieee,
(struct
ieee80211_probe_response *)
header, stats);
break;
+ case IEEE80211_STYPE_AUTH:
+ IEEE80211_DEBUG_MGMT("recieved auth (%d)\n",
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
+
+ if (ieee->handle_auth != NULL)
+ ieee->handle_auth(ieee->dev,
+ (struct ieee80211_auth *)header);
+ break;
+
+ case IEEE80211_STYPE_DISASSOC:
+ if (ieee->handle_disassoc != NULL)
+ ieee->handle_disassoc(ieee->dev,
+ (struct ieee80211_disassoc *)
+ header);
+ break;
+
+ case IEEE80211_STYPE_DEAUTH:
+ printk("DEAUTH from AP\n");
+ if (ieee->handle_deauth != NULL)
+ ieee->handle_deauth(ieee->dev, (struct ieee80211_auth *)
+ header);
+ break;
default:
IEEE80211_DEBUG_MGMT("received UNKNOWN (%d)\n",
- WLAN_FC_GET_STYPE(header->frame_ctl));
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
IEEE80211_WARNING("%s: Unknown management packet: %d\n",
ieee->dev->name,
- WLAN_FC_GET_STYPE(header->frame_ctl));
+ WLAN_FC_GET_STYPE(le16_to_cpu
+ (header->frame_ctl)));
break;
}
}
diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c
index eed07bb..95ccbad 100644
--- a/net/ieee80211/ieee80211_tx.c
+++ b/net/ieee80211/ieee80211_tx.c
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of version 2 of the GNU General Public License as
@@ -128,7 +128,7 @@
static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
-static inline int ieee80211_put_snap(u8 * data, u16 h_proto)
+static inline int ieee80211_copy_snap(u8 * data, u16 h_proto)
{
struct ieee80211_snap_hdr *snap;
u8 *oui;
@@ -157,31 +157,14 @@
struct ieee80211_crypt_data *crypt = ieee->crypt[ieee->tx_keyidx];
int res;
-#ifdef CONFIG_IEEE80211_CRYPT_TKIP
- struct ieee80211_hdr *header;
-
- if (ieee->tkip_countermeasures &&
- crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) {
- header = (struct ieee80211_hdr *)frag->data;
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
- "TX packet to " MAC_FMT "\n",
- ieee->dev->name, MAC_ARG(header->addr1));
- }
+ if (crypt == NULL)
return -1;
- }
-#endif
+
/* To encrypt, frame format is:
* IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */
-
- // PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption.
- /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
- * call both MSDU and MPDU encryption functions from here. */
atomic_inc(&crypt->refcnt);
res = 0;
- if (crypt->ops->encrypt_msdu)
- res = crypt->ops->encrypt_msdu(frag, hdr_len, crypt->priv);
- if (res == 0 && crypt->ops->encrypt_mpdu)
+ if (crypt->ops && crypt->ops->encrypt_mpdu)
res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv);
atomic_dec(&crypt->refcnt);
@@ -207,7 +190,7 @@
}
static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
- gfp_t gfp_mask)
+ int headroom, gfp_t gfp_mask)
{
struct ieee80211_txb *txb;
int i;
@@ -221,11 +204,13 @@
txb->frag_size = txb_size;
for (i = 0; i < nr_frags; i++) {
- txb->fragments[i] = dev_alloc_skb(txb_size);
+ txb->fragments[i] = __dev_alloc_skb(txb_size + headroom,
+ gfp_mask);
if (unlikely(!txb->fragments[i])) {
i--;
break;
}
+ skb_reserve(txb->fragments[i], headroom);
}
if (unlikely(i != nr_frags)) {
while (i >= 0)
@@ -236,25 +221,31 @@
return txb;
}
-/* SKBs are added to the ieee->tx_queue. */
+/* Incoming skb is converted to a txb which consists of
+ * a block of 802.11 fragment packets (stored as skbs) */
int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ieee80211_device *ieee = netdev_priv(dev);
struct ieee80211_txb *txb = NULL;
- struct ieee80211_hdr *frag_hdr;
- int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size;
+ struct ieee80211_hdr_3addr *frag_hdr;
+ int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size,
+ rts_required;
unsigned long flags;
struct net_device_stats *stats = &ieee->stats;
- int ether_type, encrypt;
+ int ether_type, encrypt, host_encrypt, host_encrypt_msdu, host_build_iv;
int bytes, fc, hdr_len;
struct sk_buff *skb_frag;
- struct ieee80211_hdr header = { /* Ensure zero initialized */
+ struct ieee80211_hdr_3addr header = { /* Ensure zero initialized */
.duration_id = 0,
.seq_ctl = 0
};
u8 dest[ETH_ALEN], src[ETH_ALEN];
-
struct ieee80211_crypt_data *crypt;
+ int priority = skb->priority;
+ int snapped = 0;
+
+ if (ieee->is_queue_full && (*ieee->is_queue_full) (dev, priority))
+ return NETDEV_TX_BUSY;
spin_lock_irqsave(&ieee->lock, flags);
@@ -276,7 +267,11 @@
crypt = ieee->crypt[ieee->tx_keyidx];
encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) &&
- ieee->host_encrypt && crypt && crypt->ops;
+ ieee->sec.encrypt;
+
+ host_encrypt = ieee->host_encrypt && encrypt && crypt;
+ host_encrypt_msdu = ieee->host_encrypt_msdu && encrypt && crypt;
+ host_build_iv = ieee->host_build_iv && encrypt && crypt;
if (!encrypt && ieee->ieee802_1x &&
ieee->drop_unencrypted && ether_type != ETH_P_PAE) {
@@ -285,8 +280,8 @@
}
/* Save source and destination addresses */
- memcpy(&dest, skb->data, ETH_ALEN);
- memcpy(&src, skb->data + ETH_ALEN, ETH_ALEN);
+ memcpy(dest, skb->data, ETH_ALEN);
+ memcpy(src, skb->data + ETH_ALEN, ETH_ALEN);
/* Advance the SKB to the start of the payload */
skb_pull(skb, sizeof(struct ethhdr));
@@ -294,7 +289,7 @@
/* Determine total amount of storage required for TXB packets */
bytes = skb->len + SNAP_SIZE + sizeof(u16);
- if (encrypt)
+ if (host_encrypt)
fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA |
IEEE80211_FCTL_PROTECTED;
else
@@ -302,70 +297,144 @@
if (ieee->iw_mode == IW_MODE_INFRA) {
fc |= IEEE80211_FCTL_TODS;
- /* To DS: Addr1 = BSSID, Addr2 = SA,
- Addr3 = DA */
- memcpy(&header.addr1, ieee->bssid, ETH_ALEN);
- memcpy(&header.addr2, &src, ETH_ALEN);
- memcpy(&header.addr3, &dest, ETH_ALEN);
+ /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */
+ memcpy(header.addr1, ieee->bssid, ETH_ALEN);
+ memcpy(header.addr2, src, ETH_ALEN);
+ memcpy(header.addr3, dest, ETH_ALEN);
} else if (ieee->iw_mode == IW_MODE_ADHOC) {
- /* not From/To DS: Addr1 = DA, Addr2 = SA,
- Addr3 = BSSID */
- memcpy(&header.addr1, dest, ETH_ALEN);
- memcpy(&header.addr2, src, ETH_ALEN);
- memcpy(&header.addr3, ieee->bssid, ETH_ALEN);
+ /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */
+ memcpy(header.addr1, dest, ETH_ALEN);
+ memcpy(header.addr2, src, ETH_ALEN);
+ memcpy(header.addr3, ieee->bssid, ETH_ALEN);
}
header.frame_ctl = cpu_to_le16(fc);
hdr_len = IEEE80211_3ADDR_LEN;
- /* Determine fragmentation size based on destination (multicast
- * and broadcast are not fragmented) */
- if (is_multicast_ether_addr(dest) || is_broadcast_ether_addr(dest))
- frag_size = MAX_FRAG_THRESHOLD;
- else
- frag_size = ieee->fts;
+ /* Encrypt msdu first on the whole data packet. */
+ if ((host_encrypt || host_encrypt_msdu) &&
+ crypt && crypt->ops && crypt->ops->encrypt_msdu) {
+ int res = 0;
+ int len = bytes + hdr_len + crypt->ops->extra_msdu_prefix_len +
+ crypt->ops->extra_msdu_postfix_len;
+ struct sk_buff *skb_new = dev_alloc_skb(len);
- /* Determine amount of payload per fragment. Regardless of if
- * this stack is providing the full 802.11 header, one will
- * eventually be affixed to this fragment -- so we must account for
- * it when determining the amount of payload space. */
- bytes_per_frag = frag_size - IEEE80211_3ADDR_LEN;
- if (ieee->config &
- (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
- bytes_per_frag -= IEEE80211_FCS_LEN;
+ if (unlikely(!skb_new))
+ goto failed;
- /* Each fragment may need to have room for encryptiong pre/postfix */
- if (encrypt)
- bytes_per_frag -= crypt->ops->extra_prefix_len +
- crypt->ops->extra_postfix_len;
+ skb_reserve(skb_new, crypt->ops->extra_msdu_prefix_len);
+ memcpy(skb_put(skb_new, hdr_len), &header, hdr_len);
+ snapped = 1;
+ ieee80211_copy_snap(skb_put(skb_new, SNAP_SIZE + sizeof(u16)),
+ ether_type);
+ memcpy(skb_put(skb_new, skb->len), skb->data, skb->len);
+ res = crypt->ops->encrypt_msdu(skb_new, hdr_len, crypt->priv);
+ if (res < 0) {
+ IEEE80211_ERROR("msdu encryption failed\n");
+ dev_kfree_skb_any(skb_new);
+ goto failed;
+ }
+ dev_kfree_skb_any(skb);
+ skb = skb_new;
+ bytes += crypt->ops->extra_msdu_prefix_len +
+ crypt->ops->extra_msdu_postfix_len;
+ skb_pull(skb, hdr_len);
+ }
- /* Number of fragments is the total bytes_per_frag /
- * payload_per_fragment */
- nr_frags = bytes / bytes_per_frag;
- bytes_last_frag = bytes % bytes_per_frag;
- if (bytes_last_frag)
+ if (host_encrypt || ieee->host_open_frag) {
+ /* Determine fragmentation size based on destination (multicast
+ * and broadcast are not fragmented) */
+ if (is_multicast_ether_addr(dest) ||
+ is_broadcast_ether_addr(dest))
+ frag_size = MAX_FRAG_THRESHOLD;
+ else
+ frag_size = ieee->fts;
+
+ /* Determine amount of payload per fragment. Regardless of if
+ * this stack is providing the full 802.11 header, one will
+ * eventually be affixed to this fragment -- so we must account
+ * for it when determining the amount of payload space. */
+ bytes_per_frag = frag_size - IEEE80211_3ADDR_LEN;
+ if (ieee->config &
+ (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+ bytes_per_frag -= IEEE80211_FCS_LEN;
+
+ /* Each fragment may need to have room for encryptiong
+ * pre/postfix */
+ if (host_encrypt)
+ bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
+ crypt->ops->extra_mpdu_postfix_len;
+
+ /* Number of fragments is the total
+ * bytes_per_frag / payload_per_fragment */
+ nr_frags = bytes / bytes_per_frag;
+ bytes_last_frag = bytes % bytes_per_frag;
+ if (bytes_last_frag)
+ nr_frags++;
+ else
+ bytes_last_frag = bytes_per_frag;
+ } else {
+ nr_frags = 1;
+ bytes_per_frag = bytes_last_frag = bytes;
+ frag_size = bytes + IEEE80211_3ADDR_LEN;
+ }
+
+ rts_required = (frag_size > ieee->rts
+ && ieee->config & CFG_IEEE80211_RTS);
+ if (rts_required)
nr_frags++;
- else
- bytes_last_frag = bytes_per_frag;
/* When we allocate the TXB we allocate enough space for the reserve
* and full fragment bytes (bytes_per_frag doesn't include prefix,
* postfix, header, FCS, etc.) */
- txb = ieee80211_alloc_txb(nr_frags, frag_size, GFP_ATOMIC);
+ txb = ieee80211_alloc_txb(nr_frags, frag_size,
+ ieee->tx_headroom, GFP_ATOMIC);
if (unlikely(!txb)) {
printk(KERN_WARNING "%s: Could not allocate TXB\n",
ieee->dev->name);
goto failed;
}
txb->encrypted = encrypt;
- txb->payload_size = bytes;
+ if (host_encrypt)
+ txb->payload_size = frag_size * (nr_frags - 1) +
+ bytes_last_frag;
+ else
+ txb->payload_size = bytes;
- for (i = 0; i < nr_frags; i++) {
+ if (rts_required) {
+ skb_frag = txb->fragments[0];
+ frag_hdr =
+ (struct ieee80211_hdr_3addr *)skb_put(skb_frag, hdr_len);
+
+ /*
+ * Set header frame_ctl to the RTS.
+ */
+ header.frame_ctl =
+ cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS);
+ memcpy(frag_hdr, &header, hdr_len);
+
+ /*
+ * Restore header frame_ctl to the original data setting.
+ */
+ header.frame_ctl = cpu_to_le16(fc);
+
+ if (ieee->config &
+ (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+ skb_put(skb_frag, 4);
+
+ txb->rts_included = 1;
+ i = 1;
+ } else
+ i = 0;
+
+ for (; i < nr_frags; i++) {
skb_frag = txb->fragments[i];
- if (encrypt)
- skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
+ if (host_encrypt || host_build_iv)
+ skb_reserve(skb_frag,
+ crypt->ops->extra_mpdu_prefix_len);
- frag_hdr = (struct ieee80211_hdr *)skb_put(skb_frag, hdr_len);
+ frag_hdr =
+ (struct ieee80211_hdr_3addr *)skb_put(skb_frag, hdr_len);
memcpy(frag_hdr, &header, hdr_len);
/* If this is not the last fragment, then add the MOREFRAGS
@@ -379,11 +448,10 @@
bytes = bytes_last_frag;
}
- /* Put a SNAP header on the first fragment */
- if (i == 0) {
- ieee80211_put_snap(skb_put
- (skb_frag, SNAP_SIZE + sizeof(u16)),
- ether_type);
+ if (i == 0 && !snapped) {
+ ieee80211_copy_snap(skb_put
+ (skb_frag, SNAP_SIZE + sizeof(u16)),
+ ether_type);
bytes -= SNAP_SIZE + sizeof(u16);
}
@@ -394,8 +462,19 @@
/* Encryption routine will move the header forward in order
* to insert the IV between the header and the payload */
- if (encrypt)
+ if (host_encrypt)
ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
+ else if (host_build_iv) {
+ struct ieee80211_crypt_data *crypt;
+
+ crypt = ieee->crypt[ieee->tx_keyidx];
+ atomic_inc(&crypt->refcnt);
+ if (crypt->ops->build_iv)
+ crypt->ops->build_iv(skb_frag, hdr_len,
+ crypt->priv);
+ atomic_dec(&crypt->refcnt);
+ }
+
if (ieee->config &
(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
skb_put(skb_frag, 4);
@@ -407,11 +486,20 @@
dev_kfree_skb_any(skb);
if (txb) {
- if ((*ieee->hard_start_xmit) (txb, dev) == 0) {
+ int ret = (*ieee->hard_start_xmit) (txb, dev, priority);
+ if (ret == 0) {
stats->tx_packets++;
stats->tx_bytes += txb->payload_size;
return 0;
}
+
+ if (ret == NETDEV_TX_BUSY) {
+ printk(KERN_ERR "%s: NETDEV_TX_BUSY returned; "
+ "driver should report queue full via "
+ "ieee_device->is_queue_full.\n",
+ ieee->dev->name);
+ }
+
ieee80211_txb_free(txb);
}
@@ -422,7 +510,72 @@
netif_stop_queue(dev);
stats->tx_errors++;
return 1;
-
}
+/* Incoming 802.11 strucure is converted to a TXB
+ * a block of 802.11 fragment packets (stored as skbs) */
+int ieee80211_tx_frame(struct ieee80211_device *ieee,
+ struct ieee80211_hdr *frame, int len)
+{
+ struct ieee80211_txb *txb = NULL;
+ unsigned long flags;
+ struct net_device_stats *stats = &ieee->stats;
+ struct sk_buff *skb_frag;
+ int priority = -1;
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ /* If there is no driver handler to take the TXB, dont' bother
+ * creating it... */
+ if (!ieee->hard_start_xmit) {
+ printk(KERN_WARNING "%s: No xmit handler.\n", ieee->dev->name);
+ goto success;
+ }
+
+ if (unlikely(len < 24)) {
+ printk(KERN_WARNING "%s: skb too small (%d).\n",
+ ieee->dev->name, len);
+ goto success;
+ }
+
+ /* When we allocate the TXB we allocate enough space for the reserve
+ * and full fragment bytes (bytes_per_frag doesn't include prefix,
+ * postfix, header, FCS, etc.) */
+ txb = ieee80211_alloc_txb(1, len, ieee->tx_headroom, GFP_ATOMIC);
+ if (unlikely(!txb)) {
+ printk(KERN_WARNING "%s: Could not allocate TXB\n",
+ ieee->dev->name);
+ goto failed;
+ }
+ txb->encrypted = 0;
+ txb->payload_size = len;
+
+ skb_frag = txb->fragments[0];
+
+ memcpy(skb_put(skb_frag, len), frame, len);
+
+ if (ieee->config &
+ (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+ skb_put(skb_frag, 4);
+
+ success:
+ spin_unlock_irqrestore(&ieee->lock, flags);
+
+ if (txb) {
+ if ((*ieee->hard_start_xmit) (txb, ieee->dev, priority) == 0) {
+ stats->tx_packets++;
+ stats->tx_bytes += txb->payload_size;
+ return 0;
+ }
+ ieee80211_txb_free(txb);
+ }
+ return 0;
+
+ failed:
+ spin_unlock_irqrestore(&ieee->lock, flags);
+ stats->tx_errors++;
+ return 1;
+}
+
+EXPORT_SYMBOL(ieee80211_tx_frame);
EXPORT_SYMBOL(ieee80211_txb_free);
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
index 94882f3..1ce7af9 100644
--- a/net/ieee80211/ieee80211_wx.c
+++ b/net/ieee80211/ieee80211_wx.c
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright(c) 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 2004-2005 Intel Corporation. All rights reserved.
Portions of this file are based on the WEP enablement code provided by the
Host AP project hostap-drivers v0.1.3
@@ -32,6 +32,7 @@
#include <linux/kmod.h>
#include <linux/module.h>
+#include <linux/jiffies.h>
#include <net/ieee80211.h>
#include <linux/wireless.h>
@@ -140,18 +141,41 @@
start = iwe_stream_add_point(start, stop, &iwe, custom);
/* Add quality statistics */
- /* TODO: Fix these values... */
iwe.cmd = IWEVQUAL;
- iwe.u.qual.qual = network->stats.signal;
- iwe.u.qual.level = network->stats.rssi;
- iwe.u.qual.noise = network->stats.noise;
- iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK;
- if (!(network->stats.mask & IEEE80211_STATMASK_RSSI))
- iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
- if (!(network->stats.mask & IEEE80211_STATMASK_NOISE))
+ iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED |
+ IW_QUAL_NOISE_UPDATED;
+
+ if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) {
+ iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID |
+ IW_QUAL_LEVEL_INVALID;
+ iwe.u.qual.qual = 0;
+ iwe.u.qual.level = 0;
+ } else {
+ iwe.u.qual.level = network->stats.rssi;
+ if (ieee->perfect_rssi == ieee->worst_rssi)
+ iwe.u.qual.qual = 100;
+ else
+ iwe.u.qual.qual =
+ (100 *
+ (ieee->perfect_rssi - ieee->worst_rssi) *
+ (ieee->perfect_rssi - ieee->worst_rssi) -
+ (ieee->perfect_rssi - network->stats.rssi) *
+ (15 * (ieee->perfect_rssi - ieee->worst_rssi) +
+ 62 * (ieee->perfect_rssi - network->stats.rssi))) /
+ ((ieee->perfect_rssi - ieee->worst_rssi) *
+ (ieee->perfect_rssi - ieee->worst_rssi));
+ if (iwe.u.qual.qual > 100)
+ iwe.u.qual.qual = 100;
+ else if (iwe.u.qual.qual < 1)
+ iwe.u.qual.qual = 0;
+ }
+
+ if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) {
iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
- if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
- iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
+ iwe.u.qual.noise = 0;
+ } else {
+ iwe.u.qual.noise = network->stats.noise;
+ }
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN);
@@ -162,7 +186,7 @@
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
- if (ieee->wpa_enabled && network->wpa_ie_len) {
+ if (network->wpa_ie_len) {
char buf[MAX_WPA_IE_LEN * 2 + 30];
u8 *p = buf;
@@ -177,7 +201,7 @@
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
- if (ieee->wpa_enabled && network->rsn_ie_len) {
+ if (network->rsn_ie_len) {
char buf[MAX_WPA_IE_LEN * 2 + 30];
u8 *p = buf;
@@ -197,8 +221,8 @@
iwe.cmd = IWEVCUSTOM;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
- " Last beacon: %lums ago",
- (jiffies - network->last_scanned) / (HZ / 100));
+ " Last beacon: %dms ago",
+ jiffies_to_msecs(jiffies - network->last_scanned));
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
@@ -228,13 +252,13 @@
ev = ipw2100_translate_scan(ieee, ev, stop, network);
else
IEEE80211_DEBUG_SCAN("Not showing network '%s ("
- MAC_FMT ")' due to age (%lums).\n",
+ MAC_FMT ")' due to age (%dms).\n",
escape_essid(network->ssid,
network->ssid_len),
MAC_ARG(network->bssid),
- (jiffies -
- network->last_scanned) / (HZ /
- 100));
+ jiffies_to_msecs(jiffies -
+ network->
+ last_scanned));
}
spin_unlock_irqrestore(&ieee->lock, flags);
@@ -258,6 +282,7 @@
};
int i, key, key_provided, len;
struct ieee80211_crypt_data **crypt;
+ int host_crypto = ieee->host_encrypt || ieee->host_decrypt;
IEEE80211_DEBUG_WX("SET_ENCODE\n");
@@ -298,15 +323,17 @@
if (i == WEP_KEYS) {
sec.enabled = 0;
+ sec.encrypt = 0;
sec.level = SEC_LEVEL_0;
- sec.flags |= SEC_ENABLED | SEC_LEVEL;
+ sec.flags |= SEC_ENABLED | SEC_LEVEL | SEC_ENCRYPT;
}
goto done;
}
sec.enabled = 1;
- sec.flags |= SEC_ENABLED;
+ sec.encrypt = 1;
+ sec.flags |= SEC_ENABLED | SEC_ENCRYPT;
if (*crypt != NULL && (*crypt)->ops != NULL &&
strcmp((*crypt)->ops->name, "WEP") != 0) {
@@ -315,7 +342,7 @@
ieee80211_crypt_delayed_deinit(ieee, crypt);
}
- if (*crypt == NULL) {
+ if (*crypt == NULL && host_crypto) {
struct ieee80211_crypt_data *new_crypt;
/* take WEP into use */
@@ -355,49 +382,56 @@
key, escape_essid(sec.keys[key], len),
erq->length, len);
sec.key_sizes[key] = len;
- (*crypt)->ops->set_key(sec.keys[key], len, NULL,
- (*crypt)->priv);
+ if (*crypt)
+ (*crypt)->ops->set_key(sec.keys[key], len, NULL,
+ (*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
* explicitely set */
if (key == sec.active_key)
sec.flags |= SEC_ACTIVE_KEY;
- } else {
- len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
- NULL, (*crypt)->priv);
- if (len == 0) {
- /* Set a default key of all 0 */
- IEEE80211_DEBUG_WX("Setting key %d to all zero.\n",
- key);
- memset(sec.keys[key], 0, 13);
- (*crypt)->ops->set_key(sec.keys[key], 13, NULL,
- (*crypt)->priv);
- sec.key_sizes[key] = 13;
- sec.flags |= (1 << key);
- }
+ } else {
+ if (host_crypto) {
+ len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
+ NULL, (*crypt)->priv);
+ if (len == 0) {
+ /* Set a default key of all 0 */
+ IEEE80211_DEBUG_WX("Setting key %d to all "
+ "zero.\n", key);
+ memset(sec.keys[key], 0, 13);
+ (*crypt)->ops->set_key(sec.keys[key], 13, NULL,
+ (*crypt)->priv);
+ sec.key_sizes[key] = 13;
+ sec.flags |= (1 << key);
+ }
+ }
/* No key data - just set the default TX key index */
if (key_provided) {
- IEEE80211_DEBUG_WX
- ("Setting key %d to default Tx key.\n", key);
+ IEEE80211_DEBUG_WX("Setting key %d to default Tx "
+ "key.\n", key);
ieee->tx_keyidx = key;
sec.active_key = key;
sec.flags |= SEC_ACTIVE_KEY;
}
}
-
- done:
- ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
- sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
- sec.flags |= SEC_AUTH_MODE;
- IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
- "OPEN" : "SHARED KEY");
+ if (erq->flags & (IW_ENCODE_OPEN | IW_ENCODE_RESTRICTED)) {
+ ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
+ sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN :
+ WLAN_AUTH_SHARED_KEY;
+ sec.flags |= SEC_AUTH_MODE;
+ IEEE80211_DEBUG_WX("Auth: %s\n",
+ sec.auth_mode == WLAN_AUTH_OPEN ?
+ "OPEN" : "SHARED KEY");
+ }
/* For now we just support WEP, so only set that security level...
* TODO: When WPA is added this is one place that needs to change */
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
+ sec.encode_alg[key] = SEC_ALG_WEP;
+ done:
if (ieee->set_security)
ieee->set_security(dev, &sec);
@@ -422,6 +456,7 @@
struct iw_point *erq = &(wrqu->encoding);
int len, key;
struct ieee80211_crypt_data *crypt;
+ struct ieee80211_security *sec = &ieee->sec;
IEEE80211_DEBUG_WX("GET_ENCODE\n");
@@ -436,23 +471,16 @@
crypt = ieee->crypt[key];
erq->flags = key + 1;
- if (crypt == NULL || crypt->ops == NULL) {
+ if (!sec->enabled) {
erq->length = 0;
erq->flags |= IW_ENCODE_DISABLED;
return 0;
}
- if (strcmp(crypt->ops->name, "WEP") != 0) {
- /* only WEP is supported with wireless extensions, so just
- * report that encryption is used */
- erq->length = 0;
- erq->flags |= IW_ENCODE_ENABLED;
- return 0;
- }
+ len = sec->key_sizes[key];
+ memcpy(keybuf, sec->keys[key], len);
- len = crypt->ops->get_key(keybuf, WEP_KEY_LEN, NULL, crypt->priv);
erq->length = (len >= 0 ? len : 0);
-
erq->flags |= IW_ENCODE_ENABLED;
if (ieee->open_wep)
@@ -463,6 +491,240 @@
return 0;
}
+int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct net_device *dev = ieee->dev;
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int i, idx, ret = 0;
+ int group_key = 0;
+ const char *alg, *module;
+ struct ieee80211_crypto_ops *ops;
+ struct ieee80211_crypt_data **crypt;
+
+ struct ieee80211_security sec = {
+ .flags = 0,
+ };
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > WEP_KEYS)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = ieee->tx_keyidx;
+
+ if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+ crypt = &ieee->crypt[idx];
+ group_key = 1;
+ } else {
+ if (idx != 0)
+ return -EINVAL;
+ if (ieee->iw_mode == IW_MODE_INFRA)
+ crypt = &ieee->crypt[idx];
+ else
+ return -EINVAL;
+ }
+
+ sec.flags |= SEC_ENABLED | SEC_ENCRYPT;
+ if ((encoding->flags & IW_ENCODE_DISABLED) ||
+ ext->alg == IW_ENCODE_ALG_NONE) {
+ if (*crypt)
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+ for (i = 0; i < WEP_KEYS; i++)
+ if (ieee->crypt[i] != NULL)
+ break;
+
+ if (i == WEP_KEYS) {
+ sec.enabled = 0;
+ sec.encrypt = 0;
+ sec.level = SEC_LEVEL_0;
+ sec.flags |= SEC_LEVEL;
+ }
+ goto done;
+ }
+
+ sec.enabled = 1;
+ sec.encrypt = 1;
+
+ if (group_key ? !ieee->host_mc_decrypt :
+ !(ieee->host_encrypt || ieee->host_decrypt ||
+ ieee->host_encrypt_msdu))
+ goto skip_host_crypt;
+
+ switch (ext->alg) {
+ case IW_ENCODE_ALG_WEP:
+ alg = "WEP";
+ module = "ieee80211_crypt_wep";
+ break;
+ case IW_ENCODE_ALG_TKIP:
+ alg = "TKIP";
+ module = "ieee80211_crypt_tkip";
+ break;
+ case IW_ENCODE_ALG_CCMP:
+ alg = "CCMP";
+ module = "ieee80211_crypt_ccmp";
+ break;
+ default:
+ IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+ dev->name, ext->alg);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ ops = ieee80211_get_crypto_ops(alg);
+ if (ops == NULL) {
+ request_module(module);
+ ops = ieee80211_get_crypto_ops(alg);
+ }
+ if (ops == NULL) {
+ IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+ dev->name, ext->alg);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (*crypt == NULL || (*crypt)->ops != ops) {
+ struct ieee80211_crypt_data *new_crypt;
+
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+ new_crypt = (struct ieee80211_crypt_data *)
+ kmalloc(sizeof(*new_crypt), GFP_KERNEL);
+ if (new_crypt == NULL) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+ new_crypt->ops = ops;
+ if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ new_crypt->priv = new_crypt->ops->init(idx);
+ if (new_crypt->priv == NULL) {
+ kfree(new_crypt);
+ ret = -EINVAL;
+ goto done;
+ }
+ *crypt = new_crypt;
+ }
+
+ if (ext->key_len > 0 && (*crypt)->ops->set_key &&
+ (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
+ (*crypt)->priv) < 0) {
+ IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ skip_host_crypt:
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ ieee->tx_keyidx = idx;
+ sec.active_key = idx;
+ sec.flags |= SEC_ACTIVE_KEY;
+ }
+
+ if (ext->alg != IW_ENCODE_ALG_NONE) {
+ memcpy(sec.keys[idx], ext->key, ext->key_len);
+ sec.key_sizes[idx] = ext->key_len;
+ sec.flags |= (1 << idx);
+ if (ext->alg == IW_ENCODE_ALG_WEP) {
+ sec.encode_alg[idx] = SEC_ALG_WEP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_1;
+ } else if (ext->alg == IW_ENCODE_ALG_TKIP) {
+ sec.encode_alg[idx] = SEC_ALG_TKIP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_2;
+ } else if (ext->alg == IW_ENCODE_ALG_CCMP) {
+ sec.encode_alg[idx] = SEC_ALG_CCMP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_3;
+ }
+ /* Don't set sec level for group keys. */
+ if (group_key)
+ sec.flags &= ~SEC_LEVEL;
+ }
+ done:
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
+
+ /*
+ * Do not reset port if card is in Managed mode since resetting will
+ * generate new IEEE 802.11 authentication which may end up in looping
+ * with IEEE 802.1X. If your hardware requires a reset after WEP
+ * configuration (for example... Prism2), implement the reset_port in
+ * the callbacks structures used to initialize the 802.11 stack.
+ */
+ if (ieee->reset_on_keychange &&
+ ieee->iw_mode != IW_MODE_INFRA &&
+ ieee->reset_port && ieee->reset_port(dev)) {
+ IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ struct ieee80211_security *sec = &ieee->sec;
+ int idx, max_key_len;
+
+ max_key_len = encoding->length - sizeof(*ext);
+ if (max_key_len < 0)
+ return -EINVAL;
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > WEP_KEYS)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = ieee->tx_keyidx;
+
+ if (!ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
+ if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA)
+ return -EINVAL;
+
+ encoding->flags = idx + 1;
+ memset(ext, 0, sizeof(*ext));
+
+ if (!sec->enabled) {
+ ext->alg = IW_ENCODE_ALG_NONE;
+ ext->key_len = 0;
+ encoding->flags |= IW_ENCODE_DISABLED;
+ } else {
+ if (sec->encode_alg[idx] == SEC_ALG_WEP)
+ ext->alg = IW_ENCODE_ALG_WEP;
+ else if (sec->encode_alg[idx] == SEC_ALG_TKIP)
+ ext->alg = IW_ENCODE_ALG_TKIP;
+ else if (sec->encode_alg[idx] == SEC_ALG_CCMP)
+ ext->alg = IW_ENCODE_ALG_CCMP;
+ else
+ return -EINVAL;
+
+ ext->key_len = sec->key_sizes[idx];
+ memcpy(ext->key, sec->keys[idx], ext->key_len);
+ encoding->flags |= IW_ENCODE_ENABLED;
+ if (ext->key_len &&
+ (ext->alg == IW_ENCODE_ALG_TKIP ||
+ ext->alg == IW_ENCODE_ALG_CCMP))
+ ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID;
+
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(ieee80211_wx_set_encodeext);
+EXPORT_SYMBOL(ieee80211_wx_get_encodeext);
+
EXPORT_SYMBOL(ieee80211_wx_get_scan);
EXPORT_SYMBOL(ieee80211_wx_set_encode);
EXPORT_SYMBOL(ieee80211_wx_get_encode);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 74f2207..4ec4b2c 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -715,6 +715,7 @@
break;
ret = 0;
if (ifa->ifa_mask != sin->sin_addr.s_addr) {
+ u32 old_mask = ifa->ifa_mask;
inet_del_ifa(in_dev, ifap, 0);
ifa->ifa_mask = sin->sin_addr.s_addr;
ifa->ifa_prefixlen = inet_mask_len(ifa->ifa_mask);
@@ -728,7 +729,7 @@
if ((dev->flags & IFF_BROADCAST) &&
(ifa->ifa_prefixlen < 31) &&
(ifa->ifa_broadcast ==
- (ifa->ifa_local|~ifa->ifa_mask))) {
+ (ifa->ifa_local|~old_mask))) {
ifa->ifa_broadcast = (ifa->ifa_local |
~sin->sin_addr.s_addr);
}
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index e61bc71..990633c 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -591,7 +591,7 @@
break;
case NETDEV_DOWN:
fib_del_ifaddr(ifa);
- if (ifa->ifa_dev && ifa->ifa_dev->ifa_list == NULL) {
+ if (ifa->ifa_dev->ifa_list == NULL) {
/* Last address was deleted from this interface.
Disable IP.
*/
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 0093ea0..66247f3 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -2404,7 +2404,7 @@
prefix = htonl(l->key);
list_for_each_entry_rcu(fa, &li->falh, fa_list) {
- const struct fib_info *fi = rcu_dereference(fa->fa_info);
+ const struct fib_info *fi = fa->fa_info;
unsigned flags = fib_flag_trans(fa->fa_type, mask, fi);
if (fa->fa_type == RTN_BROADCAST
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 90dca71..175e093 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -1108,12 +1108,9 @@
struct inet_sock *inet;
int i;
- for (i = 0; i < NR_CPUS; i++) {
+ for_each_cpu(i) {
int err;
- if (!cpu_possible(i))
- continue;
-
err = sock_create_kern(PF_INET, SOCK_RAW, IPPROTO_ICMP,
&per_cpu(__icmp_socket, i));
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 1ad5202..1775823 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -275,7 +275,8 @@
{
IP_INC_STATS(IPSTATS_MIB_OUTREQUESTS);
- if (skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->tso_size)
+ if (skb->len > dst_mtu(skb->dst) &&
+ !(skb_shinfo(skb)->ufo_size || skb_shinfo(skb)->tso_size))
return ip_fragment(skb, ip_finish_output);
else
return ip_finish_output(skb);
@@ -688,6 +689,60 @@
return csum;
}
+inline int ip_ufo_append_data(struct sock *sk,
+ int getfrag(void *from, char *to, int offset, int len,
+ int odd, struct sk_buff *skb),
+ void *from, int length, int hh_len, int fragheaderlen,
+ int transhdrlen, int mtu,unsigned int flags)
+{
+ struct sk_buff *skb;
+ int err;
+
+ /* There is support for UDP fragmentation offload by network
+ * device, so create one single skb packet containing complete
+ * udp datagram
+ */
+ if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) {
+ skb = sock_alloc_send_skb(sk,
+ hh_len + fragheaderlen + transhdrlen + 20,
+ (flags & MSG_DONTWAIT), &err);
+
+ if (skb == NULL)
+ return err;
+
+ /* reserve space for Hardware header */
+ skb_reserve(skb, hh_len);
+
+ /* create space for UDP/IP header */
+ skb_put(skb,fragheaderlen + transhdrlen);
+
+ /* initialize network header pointer */
+ skb->nh.raw = skb->data;
+
+ /* initialize protocol header pointer */
+ skb->h.raw = skb->data + fragheaderlen;
+
+ skb->ip_summed = CHECKSUM_HW;
+ skb->csum = 0;
+ sk->sk_sndmsg_off = 0;
+ }
+
+ err = skb_append_datato_frags(sk,skb, getfrag, from,
+ (length - transhdrlen));
+ if (!err) {
+ /* specify the length of each IP datagram fragment*/
+ skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen);
+ __skb_queue_tail(&sk->sk_write_queue, skb);
+
+ return 0;
+ }
+ /* There is not enough support do UFO ,
+ * so follow normal path
+ */
+ kfree_skb(skb);
+ return err;
+}
+
/*
* ip_append_data() and ip_append_page() can make one large IP datagram
* from many pieces of data. Each pieces will be holded on the socket
@@ -777,6 +832,15 @@
csummode = CHECKSUM_HW;
inet->cork.length += length;
+ if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) &&
+ (rt->u.dst.dev->features & NETIF_F_UFO)) {
+
+ if(ip_ufo_append_data(sk, getfrag, from, length, hh_len,
+ fragheaderlen, transhdrlen, mtu, flags))
+ goto error;
+
+ return 0;
+ }
/* So, what's going on in the loop below?
*
@@ -1008,14 +1072,23 @@
return -EINVAL;
inet->cork.length += size;
+ if ((sk->sk_protocol == IPPROTO_UDP) &&
+ (rt->u.dst.dev->features & NETIF_F_UFO))
+ skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen);
+
while (size > 0) {
int i;
- /* Check if the remaining data fits into current packet. */
- len = mtu - skb->len;
- if (len < size)
- len = maxfraglen - skb->len;
+ if (skb_shinfo(skb)->ufo_size)
+ len = size;
+ else {
+
+ /* Check if the remaining data fits into current packet. */
+ len = mtu - skb->len;
+ if (len < size)
+ len = maxfraglen - skb->len;
+ }
if (len <= 0) {
struct sk_buff *skb_prev;
char *data;
@@ -1023,10 +1096,7 @@
int alloclen;
skb_prev = skb;
- if (skb_prev)
- fraggap = skb_prev->len - maxfraglen;
- else
- fraggap = 0;
+ fraggap = skb_prev->len - maxfraglen;
alloclen = fragheaderlen + hh_len + fraggap + 15;
skb = sock_wmalloc(sk, alloclen, 1, sk->sk_allocation);
diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
index 07a80b5..422ab68 100644
--- a/net/ipv4/netfilter/ip_conntrack_core.c
+++ b/net/ipv4/netfilter/ip_conntrack_core.c
@@ -50,7 +50,7 @@
#include <linux/netfilter_ipv4/ip_conntrack_core.h>
#include <linux/netfilter_ipv4/listhelp.h>
-#define IP_CONNTRACK_VERSION "2.3"
+#define IP_CONNTRACK_VERSION "2.4"
#if 0
#define DEBUGP printk
@@ -148,16 +148,20 @@
static int ip_conntrack_hash_rnd_initted;
static unsigned int ip_conntrack_hash_rnd;
-static u_int32_t
-hash_conntrack(const struct ip_conntrack_tuple *tuple)
+static u_int32_t __hash_conntrack(const struct ip_conntrack_tuple *tuple,
+ unsigned int size, unsigned int rnd)
{
-#if 0
- dump_tuple(tuple);
-#endif
return (jhash_3words(tuple->src.ip,
(tuple->dst.ip ^ tuple->dst.protonum),
(tuple->src.u.all | (tuple->dst.u.all << 16)),
- ip_conntrack_hash_rnd) % ip_conntrack_htable_size);
+ rnd) % size);
+}
+
+static u_int32_t
+hash_conntrack(const struct ip_conntrack_tuple *tuple)
+{
+ return __hash_conntrack(tuple, ip_conntrack_htable_size,
+ ip_conntrack_hash_rnd);
}
int
@@ -1341,14 +1345,13 @@
return 1;
}
-static void free_conntrack_hash(void)
+static void free_conntrack_hash(struct list_head *hash, int vmalloced,int size)
{
- if (ip_conntrack_vmalloc)
- vfree(ip_conntrack_hash);
+ if (vmalloced)
+ vfree(hash);
else
- free_pages((unsigned long)ip_conntrack_hash,
- get_order(sizeof(struct list_head)
- * ip_conntrack_htable_size));
+ free_pages((unsigned long)hash,
+ get_order(sizeof(struct list_head) * size));
}
void ip_conntrack_flush()
@@ -1378,12 +1381,83 @@
ip_conntrack_flush();
kmem_cache_destroy(ip_conntrack_cachep);
kmem_cache_destroy(ip_conntrack_expect_cachep);
- free_conntrack_hash();
+ free_conntrack_hash(ip_conntrack_hash, ip_conntrack_vmalloc,
+ ip_conntrack_htable_size);
nf_unregister_sockopt(&so_getorigdst);
}
-static int hashsize;
-module_param(hashsize, int, 0400);
+static struct list_head *alloc_hashtable(int size, int *vmalloced)
+{
+ struct list_head *hash;
+ unsigned int i;
+
+ *vmalloced = 0;
+ hash = (void*)__get_free_pages(GFP_KERNEL,
+ get_order(sizeof(struct list_head)
+ * size));
+ if (!hash) {
+ *vmalloced = 1;
+ printk(KERN_WARNING"ip_conntrack: falling back to vmalloc.\n");
+ hash = vmalloc(sizeof(struct list_head) * size);
+ }
+
+ if (hash)
+ for (i = 0; i < size; i++)
+ INIT_LIST_HEAD(&hash[i]);
+
+ return hash;
+}
+
+int set_hashsize(const char *val, struct kernel_param *kp)
+{
+ int i, bucket, hashsize, vmalloced;
+ int old_vmalloced, old_size;
+ int rnd;
+ struct list_head *hash, *old_hash;
+ struct ip_conntrack_tuple_hash *h;
+
+ /* On boot, we can set this without any fancy locking. */
+ if (!ip_conntrack_htable_size)
+ return param_set_int(val, kp);
+
+ hashsize = simple_strtol(val, NULL, 0);
+ if (!hashsize)
+ return -EINVAL;
+
+ hash = alloc_hashtable(hashsize, &vmalloced);
+ if (!hash)
+ return -ENOMEM;
+
+ /* We have to rehash for the new table anyway, so we also can
+ * use a new random seed */
+ get_random_bytes(&rnd, 4);
+
+ write_lock_bh(&ip_conntrack_lock);
+ for (i = 0; i < ip_conntrack_htable_size; i++) {
+ while (!list_empty(&ip_conntrack_hash[i])) {
+ h = list_entry(ip_conntrack_hash[i].next,
+ struct ip_conntrack_tuple_hash, list);
+ list_del(&h->list);
+ bucket = __hash_conntrack(&h->tuple, hashsize, rnd);
+ list_add_tail(&h->list, &hash[bucket]);
+ }
+ }
+ old_size = ip_conntrack_htable_size;
+ old_vmalloced = ip_conntrack_vmalloc;
+ old_hash = ip_conntrack_hash;
+
+ ip_conntrack_htable_size = hashsize;
+ ip_conntrack_vmalloc = vmalloced;
+ ip_conntrack_hash = hash;
+ ip_conntrack_hash_rnd = rnd;
+ write_unlock_bh(&ip_conntrack_lock);
+
+ free_conntrack_hash(old_hash, old_vmalloced, old_size);
+ return 0;
+}
+
+module_param_call(hashsize, set_hashsize, param_get_uint,
+ &ip_conntrack_htable_size, 0600);
int __init ip_conntrack_init(void)
{
@@ -1392,9 +1466,7 @@
/* Idea from tcp.c: use 1/16384 of memory. On i386: 32MB
* machine has 256 buckets. >= 1GB machines have 8192 buckets. */
- if (hashsize) {
- ip_conntrack_htable_size = hashsize;
- } else {
+ if (!ip_conntrack_htable_size) {
ip_conntrack_htable_size
= (((num_physpages << PAGE_SHIFT) / 16384)
/ sizeof(struct list_head));
@@ -1416,20 +1488,8 @@
return ret;
}
- /* AK: the hash table is twice as big than needed because it
- uses list_head. it would be much nicer to caches to use a
- single pointer list head here. */
- ip_conntrack_vmalloc = 0;
- ip_conntrack_hash
- =(void*)__get_free_pages(GFP_KERNEL,
- get_order(sizeof(struct list_head)
- *ip_conntrack_htable_size));
- if (!ip_conntrack_hash) {
- ip_conntrack_vmalloc = 1;
- printk(KERN_WARNING "ip_conntrack: falling back to vmalloc.\n");
- ip_conntrack_hash = vmalloc(sizeof(struct list_head)
- * ip_conntrack_htable_size);
- }
+ ip_conntrack_hash = alloc_hashtable(ip_conntrack_htable_size,
+ &ip_conntrack_vmalloc);
if (!ip_conntrack_hash) {
printk(KERN_ERR "Unable to create ip_conntrack_hash\n");
goto err_unreg_sockopt;
@@ -1461,9 +1521,6 @@
ip_ct_protos[IPPROTO_ICMP] = &ip_conntrack_protocol_icmp;
write_unlock_bh(&ip_conntrack_lock);
- for (i = 0; i < ip_conntrack_htable_size; i++)
- INIT_LIST_HEAD(&ip_conntrack_hash[i]);
-
/* For use by ipt_REJECT */
ip_ct_attach = ip_conntrack_attach;
@@ -1478,7 +1535,8 @@
err_free_conntrack_slab:
kmem_cache_destroy(ip_conntrack_cachep);
err_free_hash:
- free_conntrack_hash();
+ free_conntrack_hash(ip_conntrack_hash, ip_conntrack_vmalloc,
+ ip_conntrack_htable_size);
err_unreg_sockopt:
nf_unregister_sockopt(&so_getorigdst);
diff --git a/net/ipv4/netfilter/ipt_addrtype.c b/net/ipv4/netfilter/ipt_addrtype.c
index f5909a4..e19c2a5 100644
--- a/net/ipv4/netfilter/ipt_addrtype.c
+++ b/net/ipv4/netfilter/ipt_addrtype.c
@@ -48,7 +48,7 @@
unsigned int hook_mask)
{
if (matchsize != IPT_ALIGN(sizeof(struct ipt_addrtype_info))) {
- printk(KERN_ERR "ipt_addrtype: invalid size (%u != %Zu)\n.",
+ printk(KERN_ERR "ipt_addrtype: invalid size (%u != %Zu)\n",
matchsize, IPT_ALIGN(sizeof(struct ipt_addrtype_info)));
return 0;
}
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index f7943ba..a65e508 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -90,9 +90,7 @@
unsigned long res = 0;
int i;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_possible(i))
- continue;
+ for_each_cpu(i) {
res += *(((unsigned long *) per_cpu_ptr(mib[0], i)) + offt);
res += *(((unsigned long *) per_cpu_ptr(mib[1], i)) + offt);
}
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a970b47..41edc14 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -75,7 +75,7 @@
#ifdef CONFIG_IPV6_PRIVACY
#include <linux/random.h>
#include <linux/crypto.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#endif
#include <asm/uaccess.h>
@@ -1217,12 +1217,8 @@
struct net_device *dev;
struct scatterlist sg[2];
- sg[0].page = virt_to_page(idev->entropy);
- sg[0].offset = offset_in_page(idev->entropy);
- sg[0].length = 8;
- sg[1].page = virt_to_page(idev->work_eui64);
- sg[1].offset = offset_in_page(idev->work_eui64);
- sg[1].length = 8;
+ sg_set_buf(&sg[0], idev->entropy, 8);
+ sg_set_buf(&sg[1], idev->work_eui64, 8);
dev = idev->dev;
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index b7185fb..23e5403 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -700,10 +700,7 @@
struct sock *sk;
int err, i, j;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_possible(i))
- continue;
-
+ for_each_cpu(i) {
err = sock_create_kern(PF_INET6, SOCK_RAW, IPPROTO_ICMPV6,
&per_cpu(__icmpv6_socket, i));
if (err < 0) {
@@ -749,9 +746,7 @@
{
int i;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_possible(i))
- continue;
+ for_each_cpu(i) {
sock_release(per_cpu(__icmpv6_socket, i));
}
inet6_del_protocol(&icmpv6_protocol, IPPROTO_ICMPV6);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 563b442..614296a 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -147,7 +147,8 @@
int ip6_output(struct sk_buff *skb)
{
- if (skb->len > dst_mtu(skb->dst) || dst_allfrag(skb->dst))
+ if ((skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->ufo_size) ||
+ dst_allfrag(skb->dst))
return ip6_fragment(skb, ip6_output2);
else
return ip6_output2(skb);
@@ -768,6 +769,65 @@
*dst = NULL;
return err;
}
+inline int ip6_ufo_append_data(struct sock *sk,
+ int getfrag(void *from, char *to, int offset, int len,
+ int odd, struct sk_buff *skb),
+ void *from, int length, int hh_len, int fragheaderlen,
+ int transhdrlen, int mtu,unsigned int flags)
+
+{
+ struct sk_buff *skb;
+ int err;
+
+ /* There is support for UDP large send offload by network
+ * device, so create one single skb packet containing complete
+ * udp datagram
+ */
+ if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) {
+ skb = sock_alloc_send_skb(sk,
+ hh_len + fragheaderlen + transhdrlen + 20,
+ (flags & MSG_DONTWAIT), &err);
+ if (skb == NULL)
+ return -ENOMEM;
+
+ /* reserve space for Hardware header */
+ skb_reserve(skb, hh_len);
+
+ /* create space for UDP/IP header */
+ skb_put(skb,fragheaderlen + transhdrlen);
+
+ /* initialize network header pointer */
+ skb->nh.raw = skb->data;
+
+ /* initialize protocol header pointer */
+ skb->h.raw = skb->data + fragheaderlen;
+
+ skb->ip_summed = CHECKSUM_HW;
+ skb->csum = 0;
+ sk->sk_sndmsg_off = 0;
+ }
+
+ err = skb_append_datato_frags(sk,skb, getfrag, from,
+ (length - transhdrlen));
+ if (!err) {
+ struct frag_hdr fhdr;
+
+ /* specify the length of each IP datagram fragment*/
+ skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen) -
+ sizeof(struct frag_hdr);
+ ipv6_select_ident(skb, &fhdr);
+ skb_shinfo(skb)->ip6_frag_id = fhdr.identification;
+ __skb_queue_tail(&sk->sk_write_queue, skb);
+
+ return 0;
+ }
+ /* There is not enough support do UPD LSO,
+ * so follow normal path
+ */
+ kfree_skb(skb);
+
+ return err;
+}
int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
int offset, int len, int odd, struct sk_buff *skb),
@@ -860,6 +920,15 @@
*/
inet->cork.length += length;
+ if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) &&
+ (rt->u.dst.dev->features & NETIF_F_UFO)) {
+
+ if(ip6_ufo_append_data(sk, getfrag, from, length, hh_len,
+ fragheaderlen, transhdrlen, mtu, flags))
+ goto error;
+
+ return 0;
+ }
if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
goto alloc_new_skb;
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 39a96c7..c4f2a0e 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -164,7 +164,7 @@
#define MLDV2_MASK(value, nb) ((nb)>=32 ? (value) : ((1<<(nb))-1) & (value))
#define MLDV2_EXP(thresh, nbmant, nbexp, value) \
((value) < (thresh) ? (value) : \
- ((MLDV2_MASK(value, nbmant) | (1<<(nbmant+nbexp))) << \
+ ((MLDV2_MASK(value, nbmant) | (1<<(nbmant))) << \
(MLDV2_MASK((value) >> (nbmant), nbexp) + (nbexp))))
#define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value)
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 334a596..50a13e7 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -140,9 +140,7 @@
unsigned long res = 0;
int i;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_possible(i))
- continue;
+ for_each_cpu(i) {
res += *(((unsigned long *)per_cpu_ptr(mib[0], i)) + offt);
res += *(((unsigned long *)per_cpu_ptr(mib[1], i)) + offt);
}
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 678c3f2..5ca2835 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -740,11 +740,8 @@
int netlink_sendskb(struct sock *sk, struct sk_buff *skb, int protocol)
{
- struct netlink_sock *nlk;
int len = skb->len;
- nlk = nlk_sk(sk);
-
skb_queue_tail(&sk->sk_receive_queue, skb);
sk->sk_data_ready(sk, len);
sock_put(sk);
@@ -827,7 +824,7 @@
int failure;
int congested;
int delivered;
- unsigned int allocation;
+ gfp_t allocation;
struct sk_buff *skb, *skb2;
};
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index e556d92..b18fe50 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -727,7 +727,7 @@
}
if (rose_route.mask > 10) /* Mask can't be more than 10 digits */
return -EINVAL;
- if (rose_route.ndigis > 8) /* No more than 8 digipeats */
+ if (rose_route.ndigis > AX25_MAX_DIGIS)
return -EINVAL;
err = rose_add_node(&rose_route, dev);
dev_put(dev);
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index b74f777..6e4dc28 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -69,9 +69,7 @@
unsigned long res = 0;
int i;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_possible(i))
- continue;
+ for_each_cpu(i) {
res +=
*((unsigned long *) (((void *) per_cpu_ptr(mib[0], i)) +
sizeof (unsigned long) * nr));
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 10e82ec..660c61b 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -554,7 +554,7 @@
dp.ppid = sinfo->sinfo_ppid;
/* Set the flags for an unordered send. */
- if (sinfo->sinfo_flags & MSG_UNORDERED) {
+ if (sinfo->sinfo_flags & SCTP_UNORDERED) {
flags |= SCTP_DATA_UNORDERED;
dp.ssn = 0;
} else
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 02e068d..b529af5 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1010,6 +1010,19 @@
err = -EAGAIN;
goto out_free;
}
+ } else {
+ /*
+ * If an unprivileged user inherits a 1-many
+ * style socket with open associations on a
+ * privileged port, it MAY be permitted to
+ * accept new associations, but it SHOULD NOT
+ * be permitted to open new associations.
+ */
+ if (ep->base.bind_addr.port < PROT_SOCK &&
+ !capable(CAP_NET_BIND_SERVICE)) {
+ err = -EACCES;
+ goto out_free;
+ }
}
scope = sctp_scope(&to);
@@ -1389,27 +1402,27 @@
SCTP_DEBUG_PRINTK("msg_len: %zu, sinfo_flags: 0x%x\n",
msg_len, sinfo_flags);
- /* MSG_EOF or MSG_ABORT cannot be set on a TCP-style socket. */
- if (sctp_style(sk, TCP) && (sinfo_flags & (MSG_EOF | MSG_ABORT))) {
+ /* SCTP_EOF or SCTP_ABORT cannot be set on a TCP-style socket. */
+ if (sctp_style(sk, TCP) && (sinfo_flags & (SCTP_EOF | SCTP_ABORT))) {
err = -EINVAL;
goto out_nounlock;
}
- /* If MSG_EOF is set, no data can be sent. Disallow sending zero
- * length messages when MSG_EOF|MSG_ABORT is not set.
- * If MSG_ABORT is set, the message length could be non zero with
+ /* If SCTP_EOF is set, no data can be sent. Disallow sending zero
+ * length messages when SCTP_EOF|SCTP_ABORT is not set.
+ * If SCTP_ABORT is set, the message length could be non zero with
* the msg_iov set to the user abort reason.
*/
- if (((sinfo_flags & MSG_EOF) && (msg_len > 0)) ||
- (!(sinfo_flags & (MSG_EOF|MSG_ABORT)) && (msg_len == 0))) {
+ if (((sinfo_flags & SCTP_EOF) && (msg_len > 0)) ||
+ (!(sinfo_flags & (SCTP_EOF|SCTP_ABORT)) && (msg_len == 0))) {
err = -EINVAL;
goto out_nounlock;
}
- /* If MSG_ADDR_OVER is set, there must be an address
+ /* If SCTP_ADDR_OVER is set, there must be an address
* specified in msg_name.
*/
- if ((sinfo_flags & MSG_ADDR_OVER) && (!msg->msg_name)) {
+ if ((sinfo_flags & SCTP_ADDR_OVER) && (!msg->msg_name)) {
err = -EINVAL;
goto out_nounlock;
}
@@ -1458,14 +1471,14 @@
goto out_unlock;
}
- if (sinfo_flags & MSG_EOF) {
+ if (sinfo_flags & SCTP_EOF) {
SCTP_DEBUG_PRINTK("Shutting down association: %p\n",
asoc);
sctp_primitive_SHUTDOWN(asoc, NULL);
err = 0;
goto out_unlock;
}
- if (sinfo_flags & MSG_ABORT) {
+ if (sinfo_flags & SCTP_ABORT) {
SCTP_DEBUG_PRINTK("Aborting association: %p\n", asoc);
sctp_primitive_ABORT(asoc, msg);
err = 0;
@@ -1477,7 +1490,7 @@
if (!asoc) {
SCTP_DEBUG_PRINTK("There is no association yet.\n");
- if (sinfo_flags & (MSG_EOF | MSG_ABORT)) {
+ if (sinfo_flags & (SCTP_EOF | SCTP_ABORT)) {
err = -EINVAL;
goto out_unlock;
}
@@ -1515,6 +1528,19 @@
err = -EAGAIN;
goto out_unlock;
}
+ } else {
+ /*
+ * If an unprivileged user inherits a one-to-many
+ * style socket with open associations on a privileged
+ * port, it MAY be permitted to accept new associations,
+ * but it SHOULD NOT be permitted to open new
+ * associations.
+ */
+ if (ep->base.bind_addr.port < PROT_SOCK &&
+ !capable(CAP_NET_BIND_SERVICE)) {
+ err = -EACCES;
+ goto out_unlock;
+ }
}
scope = sctp_scope(&to);
@@ -1611,10 +1637,10 @@
/* If an address is passed with the sendto/sendmsg call, it is used
* to override the primary destination address in the TCP model, or
- * when MSG_ADDR_OVER flag is set in the UDP model.
+ * when SCTP_ADDR_OVER flag is set in the UDP model.
*/
if ((sctp_style(sk, TCP) && msg_name) ||
- (sinfo_flags & MSG_ADDR_OVER)) {
+ (sinfo_flags & SCTP_ADDR_OVER)) {
chunk_tp = sctp_assoc_lookup_paddr(asoc, &to);
if (!chunk_tp) {
err = -EINVAL;
@@ -2306,16 +2332,14 @@
return -EINVAL;
if (get_user(val, (int __user *)optval))
return -EFAULT;
- if ((val < 8) || (val > SCTP_MAX_CHUNK_LEN))
+ if ((val != 0) && ((val < 8) || (val > SCTP_MAX_CHUNK_LEN)))
return -EINVAL;
sp->user_frag = val;
- if (val) {
- /* Update the frag_point of the existing associations. */
- list_for_each(pos, &(sp->ep->asocs)) {
- asoc = list_entry(pos, struct sctp_association, asocs);
- asoc->frag_point = sctp_frag_point(sp, asoc->pmtu);
- }
+ /* Update the frag_point of the existing associations. */
+ list_for_each(pos, &(sp->ep->asocs)) {
+ asoc = list_entry(pos, struct sctp_association, asocs);
+ asoc->frag_point = sctp_frag_point(sp, asoc->pmtu);
}
return 0;
@@ -2384,14 +2408,14 @@
static int sctp_setsockopt_adaption_layer(struct sock *sk, char __user *optval,
int optlen)
{
- __u32 val;
+ struct sctp_setadaption adaption;
- if (optlen < sizeof(__u32))
+ if (optlen != sizeof(struct sctp_setadaption))
return -EINVAL;
- if (copy_from_user(&val, optval, sizeof(__u32)))
+ if (copy_from_user(&adaption, optval, optlen))
return -EFAULT;
- sctp_sk(sk)->adaption_ind = val;
+ sctp_sk(sk)->adaption_ind = adaption.ssb_adaption_ind;
return 0;
}
@@ -3672,17 +3696,15 @@
static int sctp_getsockopt_adaption_layer(struct sock *sk, int len,
char __user *optval, int __user *optlen)
{
- __u32 val;
+ struct sctp_setadaption adaption;
- if (len < sizeof(__u32))
+ if (len != sizeof(struct sctp_setadaption))
return -EINVAL;
- len = sizeof(__u32);
- val = sctp_sk(sk)->adaption_ind;
- if (put_user(len, optlen))
+ adaption.ssb_adaption_ind = sctp_sk(sk)->adaption_ind;
+ if (copy_to_user(optval, &adaption, len))
return -EFAULT;
- if (copy_to_user(optval, &val, len))
- return -EFAULT;
+
return 0;
}
@@ -4640,8 +4662,8 @@
/* Minimally, validate the sinfo_flags. */
if (cmsgs->info->sinfo_flags &
- ~(MSG_UNORDERED | MSG_ADDR_OVER |
- MSG_ABORT | MSG_EOF))
+ ~(SCTP_UNORDERED | SCTP_ADDR_OVER |
+ SCTP_ABORT | SCTP_EOF))
return -EINVAL;
break;
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 057e7fa..e049f41 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -698,7 +698,7 @@
event->ssn = ntohs(chunk->subh.data_hdr->ssn);
event->ppid = chunk->subh.data_hdr->ppid;
if (chunk->chunk_hdr->flags & SCTP_DATA_UNORDERED) {
- event->flags |= MSG_UNORDERED;
+ event->flags |= SCTP_UNORDERED;
event->cumtsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
}
event->tsn = ntohl(chunk->subh.data_hdr->tsn);
@@ -824,7 +824,7 @@
*
* recvmsg() flags:
*
- * MSG_UNORDERED - This flag is present when the message was sent
+ * SCTP_UNORDERED - This flag is present when the message was sent
* non-ordered.
*/
sinfo.sinfo_flags = event->flags;
@@ -839,7 +839,7 @@
* This field will hold the current cumulative TSN as
* known by the underlying SCTP layer. Note this field is
* ignored when sending and only valid for a receive
- * operation when sinfo_flags are set to MSG_UNORDERED.
+ * operation when sinfo_flags are set to SCTP_UNORDERED.
*/
sinfo.sinfo_cumtsn = event->cumtsn;
/* sinfo_assoc_id: sizeof (sctp_assoc_t)
diff --git a/net/sunrpc/Makefile b/net/sunrpc/Makefile
index 46a2ce0..cdcab9c 100644
--- a/net/sunrpc/Makefile
+++ b/net/sunrpc/Makefile
@@ -6,7 +6,7 @@
obj-$(CONFIG_SUNRPC) += sunrpc.o
obj-$(CONFIG_SUNRPC_GSS) += auth_gss/
-sunrpc-y := clnt.o xprt.o sched.o \
+sunrpc-y := clnt.o xprt.o socklib.o xprtsock.o sched.o \
auth.o auth_null.o auth_unix.o \
svc.o svcsock.o svcauth.o svcauth_unix.o \
pmap_clnt.o timer.o xdr.o \
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 505e2d4..a415d99 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -11,7 +11,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
-#include <linux/socket.h>
#include <linux/sunrpc/clnt.h>
#include <linux/spinlock.h>
diff --git a/net/sunrpc/auth_gss/Makefile b/net/sunrpc/auth_gss/Makefile
index fe1b874..f3431a7 100644
--- a/net/sunrpc/auth_gss/Makefile
+++ b/net/sunrpc/auth_gss/Makefile
@@ -10,7 +10,7 @@
obj-$(CONFIG_RPCSEC_GSS_KRB5) += rpcsec_gss_krb5.o
rpcsec_gss_krb5-objs := gss_krb5_mech.o gss_krb5_seal.o gss_krb5_unseal.o \
- gss_krb5_seqnum.o
+ gss_krb5_seqnum.o gss_krb5_wrap.o
obj-$(CONFIG_RPCSEC_GSS_SPKM3) += rpcsec_gss_spkm3.o
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 2f7b867..f44f46f 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -42,9 +42,8 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
-#include <linux/socket.h>
-#include <linux/in.h>
#include <linux/sched.h>
+#include <linux/pagemap.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/auth.h>
#include <linux/sunrpc/auth_gss.h>
@@ -846,10 +845,8 @@
/* We compute the checksum for the verifier over the xdr-encoded bytes
* starting with the xid and ending at the end of the credential: */
- iov.iov_base = req->rq_snd_buf.head[0].iov_base;
- if (task->tk_client->cl_xprt->stream)
- /* See clnt.c:call_header() */
- iov.iov_base += 4;
+ iov.iov_base = xprt_skip_transport_header(task->tk_xprt,
+ req->rq_snd_buf.head[0].iov_base);
iov.iov_len = (u8 *)p - (u8 *)iov.iov_base;
xdr_buf_from_iov(&iov, &verf_buf);
@@ -857,9 +854,7 @@
*p++ = htonl(RPC_AUTH_GSS);
mic.data = (u8 *)(p + 1);
- maj_stat = gss_get_mic(ctx->gc_gss_ctx,
- GSS_C_QOP_DEFAULT,
- &verf_buf, &mic);
+ maj_stat = gss_get_mic(ctx->gc_gss_ctx, &verf_buf, &mic);
if (maj_stat == GSS_S_CONTEXT_EXPIRED) {
cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE;
} else if (maj_stat != 0) {
@@ -890,10 +885,8 @@
gss_validate(struct rpc_task *task, u32 *p)
{
struct rpc_cred *cred = task->tk_msg.rpc_cred;
- struct gss_cred *gss_cred = container_of(cred, struct gss_cred,
- gc_base);
struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred);
- u32 seq, qop_state;
+ u32 seq;
struct kvec iov;
struct xdr_buf verf_buf;
struct xdr_netobj mic;
@@ -914,23 +907,14 @@
mic.data = (u8 *)p;
mic.len = len;
- maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &verf_buf, &mic, &qop_state);
+ maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &verf_buf, &mic);
if (maj_stat == GSS_S_CONTEXT_EXPIRED)
cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE;
if (maj_stat)
goto out_bad;
- switch (gss_cred->gc_service) {
- case RPC_GSS_SVC_NONE:
- /* verifier data, flavor, length: */
- task->tk_auth->au_rslack = XDR_QUADLEN(len) + 2;
- break;
- case RPC_GSS_SVC_INTEGRITY:
- /* verifier data, flavor, length, length, sequence number: */
- task->tk_auth->au_rslack = XDR_QUADLEN(len) + 4;
- break;
- case RPC_GSS_SVC_PRIVACY:
- goto out_bad;
- }
+ /* We leave it to unwrap to calculate au_rslack. For now we just
+ * calculate the length of the verifier: */
+ task->tk_auth->au_verfsize = XDR_QUADLEN(len) + 2;
gss_put_ctx(ctx);
dprintk("RPC: %4u GSS gss_validate: gss_verify_mic succeeded.\n",
task->tk_pid);
@@ -975,8 +959,7 @@
p = iov->iov_base + iov->iov_len;
mic.data = (u8 *)(p + 1);
- maj_stat = gss_get_mic(ctx->gc_gss_ctx,
- GSS_C_QOP_DEFAULT, &integ_buf, &mic);
+ maj_stat = gss_get_mic(ctx->gc_gss_ctx, &integ_buf, &mic);
status = -EIO; /* XXX? */
if (maj_stat == GSS_S_CONTEXT_EXPIRED)
cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE;
@@ -990,6 +973,113 @@
return 0;
}
+static void
+priv_release_snd_buf(struct rpc_rqst *rqstp)
+{
+ int i;
+
+ for (i=0; i < rqstp->rq_enc_pages_num; i++)
+ __free_page(rqstp->rq_enc_pages[i]);
+ kfree(rqstp->rq_enc_pages);
+}
+
+static int
+alloc_enc_pages(struct rpc_rqst *rqstp)
+{
+ struct xdr_buf *snd_buf = &rqstp->rq_snd_buf;
+ int first, last, i;
+
+ if (snd_buf->page_len == 0) {
+ rqstp->rq_enc_pages_num = 0;
+ return 0;
+ }
+
+ first = snd_buf->page_base >> PAGE_CACHE_SHIFT;
+ last = (snd_buf->page_base + snd_buf->page_len - 1) >> PAGE_CACHE_SHIFT;
+ rqstp->rq_enc_pages_num = last - first + 1 + 1;
+ rqstp->rq_enc_pages
+ = kmalloc(rqstp->rq_enc_pages_num * sizeof(struct page *),
+ GFP_NOFS);
+ if (!rqstp->rq_enc_pages)
+ goto out;
+ for (i=0; i < rqstp->rq_enc_pages_num; i++) {
+ rqstp->rq_enc_pages[i] = alloc_page(GFP_NOFS);
+ if (rqstp->rq_enc_pages[i] == NULL)
+ goto out_free;
+ }
+ rqstp->rq_release_snd_buf = priv_release_snd_buf;
+ return 0;
+out_free:
+ for (i--; i >= 0; i--) {
+ __free_page(rqstp->rq_enc_pages[i]);
+ }
+out:
+ return -EAGAIN;
+}
+
+static inline int
+gss_wrap_req_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx,
+ kxdrproc_t encode, struct rpc_rqst *rqstp, u32 *p, void *obj)
+{
+ struct xdr_buf *snd_buf = &rqstp->rq_snd_buf;
+ u32 offset;
+ u32 maj_stat;
+ int status;
+ u32 *opaque_len;
+ struct page **inpages;
+ int first;
+ int pad;
+ struct kvec *iov;
+ char *tmp;
+
+ opaque_len = p++;
+ offset = (u8 *)p - (u8 *)snd_buf->head[0].iov_base;
+ *p++ = htonl(rqstp->rq_seqno);
+
+ status = encode(rqstp, p, obj);
+ if (status)
+ return status;
+
+ status = alloc_enc_pages(rqstp);
+ if (status)
+ return status;
+ first = snd_buf->page_base >> PAGE_CACHE_SHIFT;
+ inpages = snd_buf->pages + first;
+ snd_buf->pages = rqstp->rq_enc_pages;
+ snd_buf->page_base -= first << PAGE_CACHE_SHIFT;
+ /* Give the tail its own page, in case we need extra space in the
+ * head when wrapping: */
+ if (snd_buf->page_len || snd_buf->tail[0].iov_len) {
+ tmp = page_address(rqstp->rq_enc_pages[rqstp->rq_enc_pages_num - 1]);
+ memcpy(tmp, snd_buf->tail[0].iov_base, snd_buf->tail[0].iov_len);
+ snd_buf->tail[0].iov_base = tmp;
+ }
+ maj_stat = gss_wrap(ctx->gc_gss_ctx, offset, snd_buf, inpages);
+ /* RPC_SLACK_SPACE should prevent this ever happening: */
+ BUG_ON(snd_buf->len > snd_buf->buflen);
+ status = -EIO;
+ /* We're assuming that when GSS_S_CONTEXT_EXPIRED, the encryption was
+ * done anyway, so it's safe to put the request on the wire: */
+ if (maj_stat == GSS_S_CONTEXT_EXPIRED)
+ cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE;
+ else if (maj_stat)
+ return status;
+
+ *opaque_len = htonl(snd_buf->len - offset);
+ /* guess whether we're in the head or the tail: */
+ if (snd_buf->page_len || snd_buf->tail[0].iov_len)
+ iov = snd_buf->tail;
+ else
+ iov = snd_buf->head;
+ p = iov->iov_base + iov->iov_len;
+ pad = 3 - ((snd_buf->len - offset - 1) & 3);
+ memset(p, 0, pad);
+ iov->iov_len += pad;
+ snd_buf->len += pad;
+
+ return 0;
+}
+
static int
gss_wrap_req(struct rpc_task *task,
kxdrproc_t encode, void *rqstp, u32 *p, void *obj)
@@ -1017,6 +1107,8 @@
rqstp, p, obj);
break;
case RPC_GSS_SVC_PRIVACY:
+ status = gss_wrap_req_priv(cred, ctx, encode,
+ rqstp, p, obj);
break;
}
out:
@@ -1054,8 +1146,7 @@
if (xdr_buf_read_netobj(rcv_buf, &mic, mic_offset))
return status;
- maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &integ_buf,
- &mic, NULL);
+ maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &integ_buf, &mic);
if (maj_stat == GSS_S_CONTEXT_EXPIRED)
cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE;
if (maj_stat != GSS_S_COMPLETE)
@@ -1063,6 +1154,35 @@
return 0;
}
+static inline int
+gss_unwrap_resp_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx,
+ struct rpc_rqst *rqstp, u32 **p)
+{
+ struct xdr_buf *rcv_buf = &rqstp->rq_rcv_buf;
+ u32 offset;
+ u32 opaque_len;
+ u32 maj_stat;
+ int status = -EIO;
+
+ opaque_len = ntohl(*(*p)++);
+ offset = (u8 *)(*p) - (u8 *)rcv_buf->head[0].iov_base;
+ if (offset + opaque_len > rcv_buf->len)
+ return status;
+ /* remove padding: */
+ rcv_buf->len = offset + opaque_len;
+
+ maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset, rcv_buf);
+ if (maj_stat == GSS_S_CONTEXT_EXPIRED)
+ cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE;
+ if (maj_stat != GSS_S_COMPLETE)
+ return status;
+ if (ntohl(*(*p)++) != rqstp->rq_seqno)
+ return status;
+
+ return 0;
+}
+
+
static int
gss_unwrap_resp(struct rpc_task *task,
kxdrproc_t decode, void *rqstp, u32 *p, void *obj)
@@ -1071,6 +1191,9 @@
struct gss_cred *gss_cred = container_of(cred, struct gss_cred,
gc_base);
struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred);
+ u32 *savedp = p;
+ struct kvec *head = ((struct rpc_rqst *)rqstp)->rq_rcv_buf.head;
+ int savedlen = head->iov_len;
int status = -EIO;
if (ctx->gc_proc != RPC_GSS_PROC_DATA)
@@ -1084,8 +1207,14 @@
goto out;
break;
case RPC_GSS_SVC_PRIVACY:
+ status = gss_unwrap_resp_priv(cred, ctx, rqstp, &p);
+ if (status)
+ goto out;
break;
}
+ /* take into account extra slack for integrity and privacy cases: */
+ task->tk_auth->au_rslack = task->tk_auth->au_verfsize + (p - savedp)
+ + (savedlen - head->iov_len);
out_decode:
status = decode(rqstp, p, obj);
out:
diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c
index ee6ae74..97c981f 100644
--- a/net/sunrpc/auth_gss/gss_krb5_crypto.c
+++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c
@@ -37,7 +37,7 @@
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/crypto.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
@@ -75,9 +75,7 @@
memcpy(local_iv, iv, crypto_tfm_alg_ivsize(tfm));
memcpy(out, in, length);
- sg[0].page = virt_to_page(out);
- sg[0].offset = offset_in_page(out);
- sg[0].length = length;
+ sg_set_buf(sg, out, length);
ret = crypto_cipher_encrypt_iv(tfm, sg, sg, length, local_iv);
@@ -117,9 +115,7 @@
memcpy(local_iv,iv, crypto_tfm_alg_ivsize(tfm));
memcpy(out, in, length);
- sg[0].page = virt_to_page(out);
- sg[0].offset = offset_in_page(out);
- sg[0].length = length;
+ sg_set_buf(sg, out, length);
ret = crypto_cipher_decrypt_iv(tfm, sg, sg, length, local_iv);
@@ -132,24 +128,91 @@
EXPORT_SYMBOL(krb5_decrypt);
-static void
-buf_to_sg(struct scatterlist *sg, char *ptr, int len) {
- sg->page = virt_to_page(ptr);
- sg->offset = offset_in_page(ptr);
- sg->length = len;
+static int
+process_xdr_buf(struct xdr_buf *buf, int offset, int len,
+ int (*actor)(struct scatterlist *, void *), void *data)
+{
+ int i, page_len, thislen, page_offset, ret = 0;
+ struct scatterlist sg[1];
+
+ if (offset >= buf->head[0].iov_len) {
+ offset -= buf->head[0].iov_len;
+ } else {
+ thislen = buf->head[0].iov_len - offset;
+ if (thislen > len)
+ thislen = len;
+ sg_set_buf(sg, buf->head[0].iov_base + offset, thislen);
+ ret = actor(sg, data);
+ if (ret)
+ goto out;
+ offset = 0;
+ len -= thislen;
+ }
+ if (len == 0)
+ goto out;
+
+ if (offset >= buf->page_len) {
+ offset -= buf->page_len;
+ } else {
+ page_len = buf->page_len - offset;
+ if (page_len > len)
+ page_len = len;
+ len -= page_len;
+ page_offset = (offset + buf->page_base) & (PAGE_CACHE_SIZE - 1);
+ i = (offset + buf->page_base) >> PAGE_CACHE_SHIFT;
+ thislen = PAGE_CACHE_SIZE - page_offset;
+ do {
+ if (thislen > page_len)
+ thislen = page_len;
+ sg->page = buf->pages[i];
+ sg->offset = page_offset;
+ sg->length = thislen;
+ ret = actor(sg, data);
+ if (ret)
+ goto out;
+ page_len -= thislen;
+ i++;
+ page_offset = 0;
+ thislen = PAGE_CACHE_SIZE;
+ } while (page_len != 0);
+ offset = 0;
+ }
+ if (len == 0)
+ goto out;
+
+ if (offset < buf->tail[0].iov_len) {
+ thislen = buf->tail[0].iov_len - offset;
+ if (thislen > len)
+ thislen = len;
+ sg_set_buf(sg, buf->tail[0].iov_base + offset, thislen);
+ ret = actor(sg, data);
+ len -= thislen;
+ }
+ if (len != 0)
+ ret = -EINVAL;
+out:
+ return ret;
+}
+
+static int
+checksummer(struct scatterlist *sg, void *data)
+{
+ struct crypto_tfm *tfm = (struct crypto_tfm *)data;
+
+ crypto_digest_update(tfm, sg, 1);
+
+ return 0;
}
/* checksum the plaintext data and hdrlen bytes of the token header */
s32
make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body,
- struct xdr_netobj *cksum)
+ int body_offset, struct xdr_netobj *cksum)
{
char *cksumname;
struct crypto_tfm *tfm = NULL; /* XXX add to ctx? */
struct scatterlist sg[1];
u32 code = GSS_S_FAILURE;
- int len, thislen, offset;
- int i;
switch (cksumtype) {
case CKSUMTYPE_RSA_MD5:
@@ -167,35 +230,10 @@
goto out;
crypto_digest_init(tfm);
- buf_to_sg(sg, header, hdrlen);
+ sg_set_buf(sg, header, hdrlen);
crypto_digest_update(tfm, sg, 1);
- if (body->head[0].iov_len) {
- buf_to_sg(sg, body->head[0].iov_base, body->head[0].iov_len);
- crypto_digest_update(tfm, sg, 1);
- }
-
- len = body->page_len;
- if (len != 0) {
- offset = body->page_base & (PAGE_CACHE_SIZE - 1);
- i = body->page_base >> PAGE_CACHE_SHIFT;
- thislen = PAGE_CACHE_SIZE - offset;
- do {
- if (thislen > len)
- thislen = len;
- sg->page = body->pages[i];
- sg->offset = offset;
- sg->length = thislen;
- crypto_digest_update(tfm, sg, 1);
- len -= thislen;
- i++;
- offset = 0;
- thislen = PAGE_CACHE_SIZE;
- } while(len != 0);
- }
- if (body->tail[0].iov_len) {
- buf_to_sg(sg, body->tail[0].iov_base, body->tail[0].iov_len);
- crypto_digest_update(tfm, sg, 1);
- }
+ process_xdr_buf(body, body_offset, body->len - body_offset,
+ checksummer, tfm);
crypto_digest_final(tfm, cksum->data);
code = 0;
out:
@@ -204,3 +242,154 @@
}
EXPORT_SYMBOL(make_checksum);
+
+struct encryptor_desc {
+ u8 iv[8]; /* XXX hard-coded blocksize */
+ struct crypto_tfm *tfm;
+ int pos;
+ struct xdr_buf *outbuf;
+ struct page **pages;
+ struct scatterlist infrags[4];
+ struct scatterlist outfrags[4];
+ int fragno;
+ int fraglen;
+};
+
+static int
+encryptor(struct scatterlist *sg, void *data)
+{
+ struct encryptor_desc *desc = data;
+ struct xdr_buf *outbuf = desc->outbuf;
+ struct page *in_page;
+ int thislen = desc->fraglen + sg->length;
+ int fraglen, ret;
+ int page_pos;
+
+ /* Worst case is 4 fragments: head, end of page 1, start
+ * of page 2, tail. Anything more is a bug. */
+ BUG_ON(desc->fragno > 3);
+ desc->infrags[desc->fragno] = *sg;
+ desc->outfrags[desc->fragno] = *sg;
+
+ page_pos = desc->pos - outbuf->head[0].iov_len;
+ if (page_pos >= 0 && page_pos < outbuf->page_len) {
+ /* pages are not in place: */
+ int i = (page_pos + outbuf->page_base) >> PAGE_CACHE_SHIFT;
+ in_page = desc->pages[i];
+ } else {
+ in_page = sg->page;
+ }
+ desc->infrags[desc->fragno].page = in_page;
+ desc->fragno++;
+ desc->fraglen += sg->length;
+ desc->pos += sg->length;
+
+ fraglen = thislen & 7; /* XXX hardcoded blocksize */
+ thislen -= fraglen;
+
+ if (thislen == 0)
+ return 0;
+
+ ret = crypto_cipher_encrypt_iv(desc->tfm, desc->outfrags, desc->infrags,
+ thislen, desc->iv);
+ if (ret)
+ return ret;
+ if (fraglen) {
+ desc->outfrags[0].page = sg->page;
+ desc->outfrags[0].offset = sg->offset + sg->length - fraglen;
+ desc->outfrags[0].length = fraglen;
+ desc->infrags[0] = desc->outfrags[0];
+ desc->infrags[0].page = in_page;
+ desc->fragno = 1;
+ desc->fraglen = fraglen;
+ } else {
+ desc->fragno = 0;
+ desc->fraglen = 0;
+ }
+ return 0;
+}
+
+int
+gss_encrypt_xdr_buf(struct crypto_tfm *tfm, struct xdr_buf *buf, int offset,
+ struct page **pages)
+{
+ int ret;
+ struct encryptor_desc desc;
+
+ BUG_ON((buf->len - offset) % crypto_tfm_alg_blocksize(tfm) != 0);
+
+ memset(desc.iv, 0, sizeof(desc.iv));
+ desc.tfm = tfm;
+ desc.pos = offset;
+ desc.outbuf = buf;
+ desc.pages = pages;
+ desc.fragno = 0;
+ desc.fraglen = 0;
+
+ ret = process_xdr_buf(buf, offset, buf->len - offset, encryptor, &desc);
+ return ret;
+}
+
+EXPORT_SYMBOL(gss_encrypt_xdr_buf);
+
+struct decryptor_desc {
+ u8 iv[8]; /* XXX hard-coded blocksize */
+ struct crypto_tfm *tfm;
+ struct scatterlist frags[4];
+ int fragno;
+ int fraglen;
+};
+
+static int
+decryptor(struct scatterlist *sg, void *data)
+{
+ struct decryptor_desc *desc = data;
+ int thislen = desc->fraglen + sg->length;
+ int fraglen, ret;
+
+ /* Worst case is 4 fragments: head, end of page 1, start
+ * of page 2, tail. Anything more is a bug. */
+ BUG_ON(desc->fragno > 3);
+ desc->frags[desc->fragno] = *sg;
+ desc->fragno++;
+ desc->fraglen += sg->length;
+
+ fraglen = thislen & 7; /* XXX hardcoded blocksize */
+ thislen -= fraglen;
+
+ if (thislen == 0)
+ return 0;
+
+ ret = crypto_cipher_decrypt_iv(desc->tfm, desc->frags, desc->frags,
+ thislen, desc->iv);
+ if (ret)
+ return ret;
+ if (fraglen) {
+ desc->frags[0].page = sg->page;
+ desc->frags[0].offset = sg->offset + sg->length - fraglen;
+ desc->frags[0].length = fraglen;
+ desc->fragno = 1;
+ desc->fraglen = fraglen;
+ } else {
+ desc->fragno = 0;
+ desc->fraglen = 0;
+ }
+ return 0;
+}
+
+int
+gss_decrypt_xdr_buf(struct crypto_tfm *tfm, struct xdr_buf *buf, int offset)
+{
+ struct decryptor_desc desc;
+
+ /* XXXJBF: */
+ BUG_ON((buf->len - offset) % crypto_tfm_alg_blocksize(tfm) != 0);
+
+ memset(desc.iv, 0, sizeof(desc.iv));
+ desc.tfm = tfm;
+ desc.fragno = 0;
+ desc.fraglen = 0;
+ return process_xdr_buf(buf, offset, buf->len - offset, decryptor, &desc);
+}
+
+EXPORT_SYMBOL(gss_decrypt_xdr_buf);
diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c
index 606a8a8..5f1f806 100644
--- a/net/sunrpc/auth_gss/gss_krb5_mech.c
+++ b/net/sunrpc/auth_gss/gss_krb5_mech.c
@@ -39,7 +39,6 @@
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/sunrpc/auth.h>
-#include <linux/in.h>
#include <linux/sunrpc/gss_krb5.h>
#include <linux/sunrpc/xdr.h>
#include <linux/crypto.h>
@@ -191,43 +190,12 @@
kfree(kctx);
}
-static u32
-gss_verify_mic_kerberos(struct gss_ctx *ctx,
- struct xdr_buf *message,
- struct xdr_netobj *mic_token,
- u32 *qstate) {
- u32 maj_stat = 0;
- int qop_state;
- struct krb5_ctx *kctx = ctx->internal_ctx_id;
-
- maj_stat = krb5_read_token(kctx, mic_token, message, &qop_state,
- KG_TOK_MIC_MSG);
- if (!maj_stat && qop_state)
- *qstate = qop_state;
-
- dprintk("RPC: gss_verify_mic_kerberos returning %d\n", maj_stat);
- return maj_stat;
-}
-
-static u32
-gss_get_mic_kerberos(struct gss_ctx *ctx,
- u32 qop,
- struct xdr_buf *message,
- struct xdr_netobj *mic_token) {
- u32 err = 0;
- struct krb5_ctx *kctx = ctx->internal_ctx_id;
-
- err = krb5_make_token(kctx, qop, message, mic_token, KG_TOK_MIC_MSG);
-
- dprintk("RPC: gss_get_mic_kerberos returning %d\n",err);
-
- return err;
-}
-
static struct gss_api_ops gss_kerberos_ops = {
.gss_import_sec_context = gss_import_sec_context_kerberos,
.gss_get_mic = gss_get_mic_kerberos,
.gss_verify_mic = gss_verify_mic_kerberos,
+ .gss_wrap = gss_wrap_kerberos,
+ .gss_unwrap = gss_unwrap_kerberos,
.gss_delete_sec_context = gss_delete_sec_context_kerberos,
};
@@ -242,6 +210,11 @@
.service = RPC_GSS_SVC_INTEGRITY,
.name = "krb5i",
},
+ [2] = {
+ .pseudoflavor = RPC_AUTH_GSS_KRB5P,
+ .service = RPC_GSS_SVC_PRIVACY,
+ .name = "krb5p",
+ },
};
static struct gss_api_mech gss_kerberos_mech = {
diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c
index afeeb87..13f8ae9 100644
--- a/net/sunrpc/auth_gss/gss_krb5_seal.c
+++ b/net/sunrpc/auth_gss/gss_krb5_seal.c
@@ -70,22 +70,13 @@
# define RPCDBG_FACILITY RPCDBG_AUTH
#endif
-static inline int
-gss_krb5_padding(int blocksize, int length) {
- /* Most of the code is block-size independent but in practice we
- * use only 8: */
- BUG_ON(blocksize != 8);
- return 8 - (length & 7);
-}
-
u32
-krb5_make_token(struct krb5_ctx *ctx, int qop_req,
- struct xdr_buf *text, struct xdr_netobj *token,
- int toktype)
+gss_get_mic_kerberos(struct gss_ctx *gss_ctx, struct xdr_buf *text,
+ struct xdr_netobj *token)
{
+ struct krb5_ctx *ctx = gss_ctx->internal_ctx_id;
s32 checksum_type;
struct xdr_netobj md5cksum = {.len = 0, .data = NULL};
- int blocksize = 0, tmsglen;
unsigned char *ptr, *krb5_hdr, *msg_start;
s32 now;
@@ -93,9 +84,6 @@
now = get_seconds();
- if (qop_req != 0)
- goto out_err;
-
switch (ctx->signalg) {
case SGN_ALG_DES_MAC_MD5:
checksum_type = CKSUMTYPE_RSA_MD5;
@@ -111,21 +99,13 @@
goto out_err;
}
- if (toktype == KG_TOK_WRAP_MSG) {
- blocksize = crypto_tfm_alg_blocksize(ctx->enc);
- tmsglen = blocksize + text->len
- + gss_krb5_padding(blocksize, blocksize + text->len);
- } else {
- tmsglen = 0;
- }
-
- token->len = g_token_size(&ctx->mech_used, 22 + tmsglen);
+ token->len = g_token_size(&ctx->mech_used, 22);
ptr = token->data;
- g_make_token_header(&ctx->mech_used, 22 + tmsglen, &ptr);
+ g_make_token_header(&ctx->mech_used, 22, &ptr);
- *ptr++ = (unsigned char) ((toktype>>8)&0xff);
- *ptr++ = (unsigned char) (toktype&0xff);
+ *ptr++ = (unsigned char) ((KG_TOK_MIC_MSG>>8)&0xff);
+ *ptr++ = (unsigned char) (KG_TOK_MIC_MSG&0xff);
/* ptr now at byte 2 of header described in rfc 1964, section 1.2.1: */
krb5_hdr = ptr - 2;
@@ -133,17 +113,9 @@
*(u16 *)(krb5_hdr + 2) = htons(ctx->signalg);
memset(krb5_hdr + 4, 0xff, 4);
- if (toktype == KG_TOK_WRAP_MSG)
- *(u16 *)(krb5_hdr + 4) = htons(ctx->sealalg);
- if (toktype == KG_TOK_WRAP_MSG) {
- /* XXX removing support for now */
- goto out_err;
- } else { /* Sign only. */
- if (make_checksum(checksum_type, krb5_hdr, 8, text,
- &md5cksum))
+ if (make_checksum(checksum_type, krb5_hdr, 8, text, 0, &md5cksum))
goto out_err;
- }
switch (ctx->signalg) {
case SGN_ALG_DES_MAC_MD5:
diff --git a/net/sunrpc/auth_gss/gss_krb5_unseal.c b/net/sunrpc/auth_gss/gss_krb5_unseal.c
index 8767fc5..2030475 100644
--- a/net/sunrpc/auth_gss/gss_krb5_unseal.c
+++ b/net/sunrpc/auth_gss/gss_krb5_unseal.c
@@ -68,21 +68,14 @@
#endif
-/* message_buffer is an input if toktype is MIC and an output if it is WRAP:
- * If toktype is MIC: read_token is a mic token, and message_buffer is the
- * data that the mic was supposedly taken over.
- * If toktype is WRAP: read_token is a wrap token, and message_buffer is used
- * to return the decrypted data.
- */
+/* read_token is a mic token, and message_buffer is the data that the mic was
+ * supposedly taken over. */
-/* XXX will need to change prototype and/or just split into a separate function
- * when we add privacy (because read_token will be in pages too). */
u32
-krb5_read_token(struct krb5_ctx *ctx,
- struct xdr_netobj *read_token,
- struct xdr_buf *message_buffer,
- int *qop_state, int toktype)
+gss_verify_mic_kerberos(struct gss_ctx *gss_ctx,
+ struct xdr_buf *message_buffer, struct xdr_netobj *read_token)
{
+ struct krb5_ctx *ctx = gss_ctx->internal_ctx_id;
int signalg;
int sealalg;
s32 checksum_type;
@@ -100,16 +93,12 @@
read_token->len))
goto out;
- if ((*ptr++ != ((toktype>>8)&0xff)) || (*ptr++ != (toktype&0xff)))
+ if ((*ptr++ != ((KG_TOK_MIC_MSG>>8)&0xff)) ||
+ (*ptr++ != ( KG_TOK_MIC_MSG &0xff)) )
goto out;
/* XXX sanity-check bodysize?? */
- if (toktype == KG_TOK_WRAP_MSG) {
- /* XXX gone */
- goto out;
- }
-
/* get the sign and seal algorithms */
signalg = ptr[0] + (ptr[1] << 8);
@@ -120,14 +109,7 @@
if ((ptr[4] != 0xff) || (ptr[5] != 0xff))
goto out;
- if (((toktype != KG_TOK_WRAP_MSG) && (sealalg != 0xffff)) ||
- ((toktype == KG_TOK_WRAP_MSG) && (sealalg == 0xffff)))
- goto out;
-
- /* in the current spec, there is only one valid seal algorithm per
- key type, so a simple comparison is ok */
-
- if ((toktype == KG_TOK_WRAP_MSG) && !(sealalg == ctx->sealalg))
+ if (sealalg != 0xffff)
goto out;
/* there are several mappings of seal algorithms to sign algorithms,
@@ -154,7 +136,7 @@
switch (signalg) {
case SGN_ALG_DES_MAC_MD5:
ret = make_checksum(checksum_type, ptr - 2, 8,
- message_buffer, &md5cksum);
+ message_buffer, 0, &md5cksum);
if (ret)
goto out;
@@ -175,9 +157,6 @@
/* it got through unscathed. Make sure the context is unexpired */
- if (qop_state)
- *qop_state = GSS_C_QOP_DEFAULT;
-
now = get_seconds();
ret = GSS_S_CONTEXT_EXPIRED;
diff --git a/net/sunrpc/auth_gss/gss_krb5_wrap.c b/net/sunrpc/auth_gss/gss_krb5_wrap.c
new file mode 100644
index 0000000..af777cf
--- /dev/null
+++ b/net/sunrpc/auth_gss/gss_krb5_wrap.c
@@ -0,0 +1,363 @@
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/sunrpc/gss_krb5.h>
+#include <linux/random.h>
+#include <linux/pagemap.h>
+#include <asm/scatterlist.h>
+#include <linux/crypto.h>
+
+#ifdef RPC_DEBUG
+# define RPCDBG_FACILITY RPCDBG_AUTH
+#endif
+
+static inline int
+gss_krb5_padding(int blocksize, int length)
+{
+ /* Most of the code is block-size independent but currently we
+ * use only 8: */
+ BUG_ON(blocksize != 8);
+ return 8 - (length & 7);
+}
+
+static inline void
+gss_krb5_add_padding(struct xdr_buf *buf, int offset, int blocksize)
+{
+ int padding = gss_krb5_padding(blocksize, buf->len - offset);
+ char *p;
+ struct kvec *iov;
+
+ if (buf->page_len || buf->tail[0].iov_len)
+ iov = &buf->tail[0];
+ else
+ iov = &buf->head[0];
+ p = iov->iov_base + iov->iov_len;
+ iov->iov_len += padding;
+ buf->len += padding;
+ memset(p, padding, padding);
+}
+
+static inline int
+gss_krb5_remove_padding(struct xdr_buf *buf, int blocksize)
+{
+ u8 *ptr;
+ u8 pad;
+ int len = buf->len;
+
+ if (len <= buf->head[0].iov_len) {
+ pad = *(u8 *)(buf->head[0].iov_base + len - 1);
+ if (pad > buf->head[0].iov_len)
+ return -EINVAL;
+ buf->head[0].iov_len -= pad;
+ goto out;
+ } else
+ len -= buf->head[0].iov_len;
+ if (len <= buf->page_len) {
+ int last = (buf->page_base + len - 1)
+ >>PAGE_CACHE_SHIFT;
+ int offset = (buf->page_base + len - 1)
+ & (PAGE_CACHE_SIZE - 1);
+ ptr = kmap_atomic(buf->pages[last], KM_SKB_SUNRPC_DATA);
+ pad = *(ptr + offset);
+ kunmap_atomic(ptr, KM_SKB_SUNRPC_DATA);
+ goto out;
+ } else
+ len -= buf->page_len;
+ BUG_ON(len > buf->tail[0].iov_len);
+ pad = *(u8 *)(buf->tail[0].iov_base + len - 1);
+out:
+ /* XXX: NOTE: we do not adjust the page lengths--they represent
+ * a range of data in the real filesystem page cache, and we need
+ * to know that range so the xdr code can properly place read data.
+ * However adjusting the head length, as we do above, is harmless.
+ * In the case of a request that fits into a single page, the server
+ * also uses length and head length together to determine the original
+ * start of the request to copy the request for deferal; so it's
+ * easier on the server if we adjust head and tail length in tandem.
+ * It's not really a problem that we don't fool with the page and
+ * tail lengths, though--at worst badly formed xdr might lead the
+ * server to attempt to parse the padding.
+ * XXX: Document all these weird requirements for gss mechanism
+ * wrap/unwrap functions. */
+ if (pad > blocksize)
+ return -EINVAL;
+ if (buf->len > pad)
+ buf->len -= pad;
+ else
+ return -EINVAL;
+ return 0;
+}
+
+static inline void
+make_confounder(char *p, int blocksize)
+{
+ static u64 i = 0;
+ u64 *q = (u64 *)p;
+
+ /* rfc1964 claims this should be "random". But all that's really
+ * necessary is that it be unique. And not even that is necessary in
+ * our case since our "gssapi" implementation exists only to support
+ * rpcsec_gss, so we know that the only buffers we will ever encrypt
+ * already begin with a unique sequence number. Just to hedge my bets
+ * I'll make a half-hearted attempt at something unique, but ensuring
+ * uniqueness would mean worrying about atomicity and rollover, and I
+ * don't care enough. */
+
+ BUG_ON(blocksize != 8);
+ *q = i++;
+}
+
+/* Assumptions: the head and tail of inbuf are ours to play with.
+ * The pages, however, may be real pages in the page cache and we replace
+ * them with scratch pages from **pages before writing to them. */
+/* XXX: obviously the above should be documentation of wrap interface,
+ * and shouldn't be in this kerberos-specific file. */
+
+/* XXX factor out common code with seal/unseal. */
+
+u32
+gss_wrap_kerberos(struct gss_ctx *ctx, int offset,
+ struct xdr_buf *buf, struct page **pages)
+{
+ struct krb5_ctx *kctx = ctx->internal_ctx_id;
+ s32 checksum_type;
+ struct xdr_netobj md5cksum = {.len = 0, .data = NULL};
+ int blocksize = 0, plainlen;
+ unsigned char *ptr, *krb5_hdr, *msg_start;
+ s32 now;
+ int headlen;
+ struct page **tmp_pages;
+
+ dprintk("RPC: gss_wrap_kerberos\n");
+
+ now = get_seconds();
+
+ switch (kctx->signalg) {
+ case SGN_ALG_DES_MAC_MD5:
+ checksum_type = CKSUMTYPE_RSA_MD5;
+ break;
+ default:
+ dprintk("RPC: gss_krb5_seal: kctx->signalg %d not"
+ " supported\n", kctx->signalg);
+ goto out_err;
+ }
+ if (kctx->sealalg != SEAL_ALG_NONE && kctx->sealalg != SEAL_ALG_DES) {
+ dprintk("RPC: gss_krb5_seal: kctx->sealalg %d not supported\n",
+ kctx->sealalg);
+ goto out_err;
+ }
+
+ blocksize = crypto_tfm_alg_blocksize(kctx->enc);
+ gss_krb5_add_padding(buf, offset, blocksize);
+ BUG_ON((buf->len - offset) % blocksize);
+ plainlen = blocksize + buf->len - offset;
+
+ headlen = g_token_size(&kctx->mech_used, 22 + plainlen) -
+ (buf->len - offset);
+
+ ptr = buf->head[0].iov_base + offset;
+ /* shift data to make room for header. */
+ /* XXX Would be cleverer to encrypt while copying. */
+ /* XXX bounds checking, slack, etc. */
+ memmove(ptr + headlen, ptr, buf->head[0].iov_len - offset);
+ buf->head[0].iov_len += headlen;
+ buf->len += headlen;
+ BUG_ON((buf->len - offset - headlen) % blocksize);
+
+ g_make_token_header(&kctx->mech_used, 22 + plainlen, &ptr);
+
+
+ *ptr++ = (unsigned char) ((KG_TOK_WRAP_MSG>>8)&0xff);
+ *ptr++ = (unsigned char) (KG_TOK_WRAP_MSG&0xff);
+
+ /* ptr now at byte 2 of header described in rfc 1964, section 1.2.1: */
+ krb5_hdr = ptr - 2;
+ msg_start = krb5_hdr + 24;
+ /* XXXJBF: */ BUG_ON(buf->head[0].iov_base + offset + headlen != msg_start + blocksize);
+
+ *(u16 *)(krb5_hdr + 2) = htons(kctx->signalg);
+ memset(krb5_hdr + 4, 0xff, 4);
+ *(u16 *)(krb5_hdr + 4) = htons(kctx->sealalg);
+
+ make_confounder(msg_start, blocksize);
+
+ /* XXXJBF: UGH!: */
+ tmp_pages = buf->pages;
+ buf->pages = pages;
+ if (make_checksum(checksum_type, krb5_hdr, 8, buf,
+ offset + headlen - blocksize, &md5cksum))
+ goto out_err;
+ buf->pages = tmp_pages;
+
+ switch (kctx->signalg) {
+ case SGN_ALG_DES_MAC_MD5:
+ if (krb5_encrypt(kctx->seq, NULL, md5cksum.data,
+ md5cksum.data, md5cksum.len))
+ goto out_err;
+ memcpy(krb5_hdr + 16,
+ md5cksum.data + md5cksum.len - KRB5_CKSUM_LENGTH,
+ KRB5_CKSUM_LENGTH);
+
+ dprintk("RPC: make_seal_token: cksum data: \n");
+ print_hexl((u32 *) (krb5_hdr + 16), KRB5_CKSUM_LENGTH, 0);
+ break;
+ default:
+ BUG();
+ }
+
+ kfree(md5cksum.data);
+
+ /* XXX would probably be more efficient to compute checksum
+ * and encrypt at the same time: */
+ if ((krb5_make_seq_num(kctx->seq, kctx->initiate ? 0 : 0xff,
+ kctx->seq_send, krb5_hdr + 16, krb5_hdr + 8)))
+ goto out_err;
+
+ if (gss_encrypt_xdr_buf(kctx->enc, buf, offset + headlen - blocksize,
+ pages))
+ goto out_err;
+
+ kctx->seq_send++;
+
+ return ((kctx->endtime < now) ? GSS_S_CONTEXT_EXPIRED : GSS_S_COMPLETE);
+out_err:
+ if (md5cksum.data) kfree(md5cksum.data);
+ return GSS_S_FAILURE;
+}
+
+u32
+gss_unwrap_kerberos(struct gss_ctx *ctx, int offset, struct xdr_buf *buf)
+{
+ struct krb5_ctx *kctx = ctx->internal_ctx_id;
+ int signalg;
+ int sealalg;
+ s32 checksum_type;
+ struct xdr_netobj md5cksum = {.len = 0, .data = NULL};
+ s32 now;
+ int direction;
+ s32 seqnum;
+ unsigned char *ptr;
+ int bodysize;
+ u32 ret = GSS_S_DEFECTIVE_TOKEN;
+ void *data_start, *orig_start;
+ int data_len;
+ int blocksize;
+
+ dprintk("RPC: gss_unwrap_kerberos\n");
+
+ ptr = (u8 *)buf->head[0].iov_base + offset;
+ if (g_verify_token_header(&kctx->mech_used, &bodysize, &ptr,
+ buf->len - offset))
+ goto out;
+
+ if ((*ptr++ != ((KG_TOK_WRAP_MSG>>8)&0xff)) ||
+ (*ptr++ != (KG_TOK_WRAP_MSG &0xff)) )
+ goto out;
+
+ /* XXX sanity-check bodysize?? */
+
+ /* get the sign and seal algorithms */
+
+ signalg = ptr[0] + (ptr[1] << 8);
+ sealalg = ptr[2] + (ptr[3] << 8);
+
+ /* Sanity checks */
+
+ if ((ptr[4] != 0xff) || (ptr[5] != 0xff))
+ goto out;
+
+ if (sealalg == 0xffff)
+ goto out;
+
+ /* in the current spec, there is only one valid seal algorithm per
+ key type, so a simple comparison is ok */
+
+ if (sealalg != kctx->sealalg)
+ goto out;
+
+ /* there are several mappings of seal algorithms to sign algorithms,
+ but few enough that we can try them all. */
+
+ if ((kctx->sealalg == SEAL_ALG_NONE && signalg > 1) ||
+ (kctx->sealalg == SEAL_ALG_1 && signalg != SGN_ALG_3) ||
+ (kctx->sealalg == SEAL_ALG_DES3KD &&
+ signalg != SGN_ALG_HMAC_SHA1_DES3_KD))
+ goto out;
+
+ if (gss_decrypt_xdr_buf(kctx->enc, buf,
+ ptr + 22 - (unsigned char *)buf->head[0].iov_base))
+ goto out;
+
+ /* compute the checksum of the message */
+
+ /* initialize the the cksum */
+ switch (signalg) {
+ case SGN_ALG_DES_MAC_MD5:
+ checksum_type = CKSUMTYPE_RSA_MD5;
+ break;
+ default:
+ ret = GSS_S_DEFECTIVE_TOKEN;
+ goto out;
+ }
+
+ switch (signalg) {
+ case SGN_ALG_DES_MAC_MD5:
+ ret = make_checksum(checksum_type, ptr - 2, 8, buf,
+ ptr + 22 - (unsigned char *)buf->head[0].iov_base, &md5cksum);
+ if (ret)
+ goto out;
+
+ ret = krb5_encrypt(kctx->seq, NULL, md5cksum.data,
+ md5cksum.data, md5cksum.len);
+ if (ret)
+ goto out;
+
+ if (memcmp(md5cksum.data + 8, ptr + 14, 8)) {
+ ret = GSS_S_BAD_SIG;
+ goto out;
+ }
+ break;
+ default:
+ ret = GSS_S_DEFECTIVE_TOKEN;
+ goto out;
+ }
+
+ /* it got through unscathed. Make sure the context is unexpired */
+
+ now = get_seconds();
+
+ ret = GSS_S_CONTEXT_EXPIRED;
+ if (now > kctx->endtime)
+ goto out;
+
+ /* do sequencing checks */
+
+ ret = GSS_S_BAD_SIG;
+ if ((ret = krb5_get_seq_num(kctx->seq, ptr + 14, ptr + 6, &direction,
+ &seqnum)))
+ goto out;
+
+ if ((kctx->initiate && direction != 0xff) ||
+ (!kctx->initiate && direction != 0))
+ goto out;
+
+ /* Copy the data back to the right position. XXX: Would probably be
+ * better to copy and encrypt at the same time. */
+
+ blocksize = crypto_tfm_alg_blocksize(kctx->enc);
+ data_start = ptr + 22 + blocksize;
+ orig_start = buf->head[0].iov_base + offset;
+ data_len = (buf->head[0].iov_base + buf->head[0].iov_len) - data_start;
+ memmove(orig_start, data_start, data_len);
+ buf->head[0].iov_len -= (data_start - orig_start);
+ buf->len -= (data_start - orig_start);
+
+ ret = GSS_S_DEFECTIVE_TOKEN;
+ if (gss_krb5_remove_padding(buf, blocksize))
+ goto out;
+
+ ret = GSS_S_COMPLETE;
+out:
+ if (md5cksum.data) kfree(md5cksum.data);
+ return ret;
+}
diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c
index 9dfb683..b048bf6 100644
--- a/net/sunrpc/auth_gss/gss_mech_switch.c
+++ b/net/sunrpc/auth_gss/gss_mech_switch.c
@@ -35,7 +35,6 @@
#include <linux/types.h>
#include <linux/slab.h>
-#include <linux/socket.h>
#include <linux/module.h>
#include <linux/sunrpc/msg_prot.h>
#include <linux/sunrpc/gss_asn1.h>
@@ -251,13 +250,11 @@
u32
gss_get_mic(struct gss_ctx *context_handle,
- u32 qop,
struct xdr_buf *message,
struct xdr_netobj *mic_token)
{
return context_handle->mech_type->gm_ops
->gss_get_mic(context_handle,
- qop,
message,
mic_token);
}
@@ -267,16 +264,34 @@
u32
gss_verify_mic(struct gss_ctx *context_handle,
struct xdr_buf *message,
- struct xdr_netobj *mic_token,
- u32 *qstate)
+ struct xdr_netobj *mic_token)
{
return context_handle->mech_type->gm_ops
->gss_verify_mic(context_handle,
message,
- mic_token,
- qstate);
+ mic_token);
}
+u32
+gss_wrap(struct gss_ctx *ctx_id,
+ int offset,
+ struct xdr_buf *buf,
+ struct page **inpages)
+{
+ return ctx_id->mech_type->gm_ops
+ ->gss_wrap(ctx_id, offset, buf, inpages);
+}
+
+u32
+gss_unwrap(struct gss_ctx *ctx_id,
+ int offset,
+ struct xdr_buf *buf)
+{
+ return ctx_id->mech_type->gm_ops
+ ->gss_unwrap(ctx_id, offset, buf);
+}
+
+
/* gss_delete_sec_context: free all resources associated with context_handle.
* Note this differs from the RFC 2744-specified prototype in that we don't
* bother returning an output token, since it would never be used anyway. */
diff --git a/net/sunrpc/auth_gss/gss_spkm3_mech.c b/net/sunrpc/auth_gss/gss_spkm3_mech.c
index 6c97d61..39b3edc 100644
--- a/net/sunrpc/auth_gss/gss_spkm3_mech.c
+++ b/net/sunrpc/auth_gss/gss_spkm3_mech.c
@@ -224,18 +224,13 @@
static u32
gss_verify_mic_spkm3(struct gss_ctx *ctx,
struct xdr_buf *signbuf,
- struct xdr_netobj *checksum,
- u32 *qstate) {
+ struct xdr_netobj *checksum)
+{
u32 maj_stat = 0;
- int qop_state = 0;
struct spkm3_ctx *sctx = ctx->internal_ctx_id;
dprintk("RPC: gss_verify_mic_spkm3 calling spkm3_read_token\n");
- maj_stat = spkm3_read_token(sctx, checksum, signbuf, &qop_state,
- SPKM_MIC_TOK);
-
- if (!maj_stat && qop_state)
- *qstate = qop_state;
+ maj_stat = spkm3_read_token(sctx, checksum, signbuf, SPKM_MIC_TOK);
dprintk("RPC: gss_verify_mic_spkm3 returning %d\n", maj_stat);
return maj_stat;
@@ -243,15 +238,15 @@
static u32
gss_get_mic_spkm3(struct gss_ctx *ctx,
- u32 qop,
struct xdr_buf *message_buffer,
- struct xdr_netobj *message_token) {
+ struct xdr_netobj *message_token)
+{
u32 err = 0;
struct spkm3_ctx *sctx = ctx->internal_ctx_id;
dprintk("RPC: gss_get_mic_spkm3\n");
- err = spkm3_make_token(sctx, qop, message_buffer,
+ err = spkm3_make_token(sctx, message_buffer,
message_token, SPKM_MIC_TOK);
return err;
}
@@ -264,8 +259,8 @@
};
static struct pf_desc gss_spkm3_pfs[] = {
- {RPC_AUTH_GSS_SPKM, 0, RPC_GSS_SVC_NONE, "spkm3"},
- {RPC_AUTH_GSS_SPKMI, 0, RPC_GSS_SVC_INTEGRITY, "spkm3i"},
+ {RPC_AUTH_GSS_SPKM, RPC_GSS_SVC_NONE, "spkm3"},
+ {RPC_AUTH_GSS_SPKMI, RPC_GSS_SVC_INTEGRITY, "spkm3i"},
};
static struct gss_api_mech gss_spkm3_mech = {
diff --git a/net/sunrpc/auth_gss/gss_spkm3_seal.c b/net/sunrpc/auth_gss/gss_spkm3_seal.c
index 2533986..148201e 100644
--- a/net/sunrpc/auth_gss/gss_spkm3_seal.c
+++ b/net/sunrpc/auth_gss/gss_spkm3_seal.c
@@ -51,7 +51,7 @@
*/
u32
-spkm3_make_token(struct spkm3_ctx *ctx, int qop_req,
+spkm3_make_token(struct spkm3_ctx *ctx,
struct xdr_buf * text, struct xdr_netobj * token,
int toktype)
{
@@ -68,8 +68,6 @@
dprintk("RPC: spkm3_make_token\n");
now = jiffies;
- if (qop_req != 0)
- goto out_err;
if (ctx->ctx_id.len != 16) {
dprintk("RPC: spkm3_make_token BAD ctx_id.len %d\n",
diff --git a/net/sunrpc/auth_gss/gss_spkm3_unseal.c b/net/sunrpc/auth_gss/gss_spkm3_unseal.c
index 65ce81b..c3c0d95 100644
--- a/net/sunrpc/auth_gss/gss_spkm3_unseal.c
+++ b/net/sunrpc/auth_gss/gss_spkm3_unseal.c
@@ -52,7 +52,7 @@
spkm3_read_token(struct spkm3_ctx *ctx,
struct xdr_netobj *read_token, /* checksum */
struct xdr_buf *message_buffer, /* signbuf */
- int *qop_state, int toktype)
+ int toktype)
{
s32 code;
struct xdr_netobj wire_cksum = {.len =0, .data = NULL};
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index e330819..e4ada15 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -566,8 +566,7 @@
if (rqstp->rq_deferred) /* skip verification of revisited request */
return SVC_OK;
- if (gss_verify_mic(ctx_id, &rpchdr, &checksum, NULL)
- != GSS_S_COMPLETE) {
+ if (gss_verify_mic(ctx_id, &rpchdr, &checksum) != GSS_S_COMPLETE) {
*authp = rpcsec_gsserr_credproblem;
return SVC_DENIED;
}
@@ -604,7 +603,7 @@
xdr_buf_from_iov(&iov, &verf_data);
p = rqstp->rq_res.head->iov_base + rqstp->rq_res.head->iov_len;
mic.data = (u8 *)(p + 1);
- maj_stat = gss_get_mic(ctx_id, 0, &verf_data, &mic);
+ maj_stat = gss_get_mic(ctx_id, &verf_data, &mic);
if (maj_stat != GSS_S_COMPLETE)
return -1;
*p++ = htonl(mic.len);
@@ -710,7 +709,7 @@
goto out;
if (read_bytes_from_xdr_buf(buf, integ_len + 4, mic.data, mic.len))
goto out;
- maj_stat = gss_verify_mic(ctx, &integ_buf, &mic, NULL);
+ maj_stat = gss_verify_mic(ctx, &integ_buf, &mic);
if (maj_stat != GSS_S_COMPLETE)
goto out;
if (ntohl(svc_getu32(&buf->head[0])) != seq)
@@ -1012,7 +1011,7 @@
resv = &resbuf->tail[0];
}
mic.data = (u8 *)resv->iov_base + resv->iov_len + 4;
- if (gss_get_mic(gsd->rsci->mechctx, 0, &integ_buf, &mic))
+ if (gss_get_mic(gsd->rsci->mechctx, &integ_buf, &mic))
goto out_err;
svc_putu32(resv, htonl(mic.len));
memset(mic.data + mic.len, 0,
diff --git a/net/sunrpc/auth_null.c b/net/sunrpc/auth_null.c
index 9b72d3a..f56767a 100644
--- a/net/sunrpc/auth_null.c
+++ b/net/sunrpc/auth_null.c
@@ -7,9 +7,7 @@
*/
#include <linux/types.h>
-#include <linux/socket.h>
#include <linux/module.h>
-#include <linux/in.h>
#include <linux/utsname.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sched.h>
diff --git a/net/sunrpc/auth_unix.c b/net/sunrpc/auth_unix.c
index 4ff297a..890fb5e 100644
--- a/net/sunrpc/auth_unix.c
+++ b/net/sunrpc/auth_unix.c
@@ -9,8 +9,6 @@
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/module.h>
-#include <linux/socket.h>
-#include <linux/in.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/auth.h>
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index f17e615..702ede3 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1,5 +1,5 @@
/*
- * linux/net/sunrpc/rpcclnt.c
+ * linux/net/sunrpc/clnt.c
*
* This file contains the high-level RPC interface.
* It is modeled as a finite state machine to support both synchronous
@@ -27,7 +27,6 @@
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/in.h>
#include <linux/utsname.h>
#include <linux/sunrpc/clnt.h>
@@ -53,6 +52,7 @@
static void call_encode(struct rpc_task *task);
static void call_decode(struct rpc_task *task);
static void call_bind(struct rpc_task *task);
+static void call_bind_status(struct rpc_task *task);
static void call_transmit(struct rpc_task *task);
static void call_status(struct rpc_task *task);
static void call_refresh(struct rpc_task *task);
@@ -517,15 +517,8 @@
rpc_setbufsize(struct rpc_clnt *clnt, unsigned int sndsize, unsigned int rcvsize)
{
struct rpc_xprt *xprt = clnt->cl_xprt;
-
- xprt->sndsize = 0;
- if (sndsize)
- xprt->sndsize = sndsize + RPC_SLACK_SPACE;
- xprt->rcvsize = 0;
- if (rcvsize)
- xprt->rcvsize = rcvsize + RPC_SLACK_SPACE;
- if (xprt_connected(xprt))
- xprt_sock_setbufsize(xprt);
+ if (xprt->ops->set_buffer_size)
+ xprt->ops->set_buffer_size(xprt, sndsize, rcvsize);
}
/*
@@ -685,13 +678,11 @@
static void
call_encode(struct rpc_task *task)
{
- struct rpc_clnt *clnt = task->tk_client;
struct rpc_rqst *req = task->tk_rqstp;
struct xdr_buf *sndbuf = &req->rq_snd_buf;
struct xdr_buf *rcvbuf = &req->rq_rcv_buf;
unsigned int bufsiz;
kxdrproc_t encode;
- int status;
u32 *p;
dprintk("RPC: %4d call_encode (status %d)\n",
@@ -719,11 +710,15 @@
rpc_exit(task, -EIO);
return;
}
- if (encode && (status = rpcauth_wrap_req(task, encode, req, p,
- task->tk_msg.rpc_argp)) < 0) {
- printk(KERN_WARNING "%s: can't encode arguments: %d\n",
- clnt->cl_protname, -status);
- rpc_exit(task, status);
+ if (encode == NULL)
+ return;
+
+ task->tk_status = rpcauth_wrap_req(task, encode, req, p,
+ task->tk_msg.rpc_argp);
+ if (task->tk_status == -ENOMEM) {
+ /* XXX: Is this sane? */
+ rpc_delay(task, 3*HZ);
+ task->tk_status = -EAGAIN;
}
}
@@ -734,43 +729,95 @@
call_bind(struct rpc_task *task)
{
struct rpc_clnt *clnt = task->tk_client;
- struct rpc_xprt *xprt = clnt->cl_xprt;
- dprintk("RPC: %4d call_bind xprt %p %s connected\n", task->tk_pid,
- xprt, (xprt_connected(xprt) ? "is" : "is not"));
+ dprintk("RPC: %4d call_bind (status %d)\n",
+ task->tk_pid, task->tk_status);
- task->tk_action = (xprt_connected(xprt)) ? call_transmit : call_connect;
-
+ task->tk_action = call_connect;
if (!clnt->cl_port) {
- task->tk_action = call_connect;
- task->tk_timeout = RPC_CONNECT_TIMEOUT;
+ task->tk_action = call_bind_status;
+ task->tk_timeout = task->tk_xprt->bind_timeout;
rpc_getport(task, clnt);
}
}
/*
- * 4a. Connect to the RPC server (TCP case)
+ * 4a. Sort out bind result
+ */
+static void
+call_bind_status(struct rpc_task *task)
+{
+ int status = -EACCES;
+
+ if (task->tk_status >= 0) {
+ dprintk("RPC: %4d call_bind_status (status %d)\n",
+ task->tk_pid, task->tk_status);
+ task->tk_status = 0;
+ task->tk_action = call_connect;
+ return;
+ }
+
+ switch (task->tk_status) {
+ case -EACCES:
+ dprintk("RPC: %4d remote rpcbind: RPC program/version unavailable\n",
+ task->tk_pid);
+ rpc_delay(task, 3*HZ);
+ goto retry_bind;
+ case -ETIMEDOUT:
+ dprintk("RPC: %4d rpcbind request timed out\n",
+ task->tk_pid);
+ if (RPC_IS_SOFT(task)) {
+ status = -EIO;
+ break;
+ }
+ goto retry_bind;
+ case -EPFNOSUPPORT:
+ dprintk("RPC: %4d remote rpcbind service unavailable\n",
+ task->tk_pid);
+ break;
+ case -EPROTONOSUPPORT:
+ dprintk("RPC: %4d remote rpcbind version 2 unavailable\n",
+ task->tk_pid);
+ break;
+ default:
+ dprintk("RPC: %4d unrecognized rpcbind error (%d)\n",
+ task->tk_pid, -task->tk_status);
+ status = -EIO;
+ break;
+ }
+
+ rpc_exit(task, status);
+ return;
+
+retry_bind:
+ task->tk_status = 0;
+ task->tk_action = call_bind;
+ return;
+}
+
+/*
+ * 4b. Connect to the RPC server
*/
static void
call_connect(struct rpc_task *task)
{
- struct rpc_clnt *clnt = task->tk_client;
+ struct rpc_xprt *xprt = task->tk_xprt;
- dprintk("RPC: %4d call_connect status %d\n",
- task->tk_pid, task->tk_status);
+ dprintk("RPC: %4d call_connect xprt %p %s connected\n",
+ task->tk_pid, xprt,
+ (xprt_connected(xprt) ? "is" : "is not"));
- if (xprt_connected(clnt->cl_xprt)) {
- task->tk_action = call_transmit;
- return;
+ task->tk_action = call_transmit;
+ if (!xprt_connected(xprt)) {
+ task->tk_action = call_connect_status;
+ if (task->tk_status < 0)
+ return;
+ xprt_connect(task);
}
- task->tk_action = call_connect_status;
- if (task->tk_status < 0)
- return;
- xprt_connect(task);
}
/*
- * 4b. Sort out connect result
+ * 4c. Sort out connect result
*/
static void
call_connect_status(struct rpc_task *task)
@@ -778,6 +825,9 @@
struct rpc_clnt *clnt = task->tk_client;
int status = task->tk_status;
+ dprintk("RPC: %5u call_connect_status (status %d)\n",
+ task->tk_pid, task->tk_status);
+
task->tk_status = 0;
if (status >= 0) {
clnt->cl_stats->netreconn++;
@@ -785,17 +835,19 @@
return;
}
- /* Something failed: we may have to rebind */
+ /* Something failed: remote service port may have changed */
if (clnt->cl_autobind)
clnt->cl_port = 0;
+
switch (status) {
case -ENOTCONN:
case -ETIMEDOUT:
case -EAGAIN:
- task->tk_action = (clnt->cl_port == 0) ? call_bind : call_connect;
+ task->tk_action = call_bind;
break;
default:
rpc_exit(task, -EIO);
+ break;
}
}
@@ -815,10 +867,12 @@
if (task->tk_status != 0)
return;
/* Encode here so that rpcsec_gss can use correct sequence number. */
- if (!task->tk_rqstp->rq_bytes_sent)
+ if (task->tk_rqstp->rq_bytes_sent == 0) {
call_encode(task);
- if (task->tk_status < 0)
- return;
+ /* Did the encode result in an error condition? */
+ if (task->tk_status != 0)
+ goto out_nosend;
+ }
xprt_transmit(task);
if (task->tk_status < 0)
return;
@@ -826,6 +880,10 @@
task->tk_action = NULL;
rpc_wake_up_task(task);
}
+ return;
+out_nosend:
+ /* release socket write lock before attempting to handle error */
+ xprt_abort_transmit(task);
}
/*
@@ -1020,13 +1078,12 @@
call_header(struct rpc_task *task)
{
struct rpc_clnt *clnt = task->tk_client;
- struct rpc_xprt *xprt = clnt->cl_xprt;
struct rpc_rqst *req = task->tk_rqstp;
u32 *p = req->rq_svec[0].iov_base;
/* FIXME: check buffer size? */
- if (xprt->stream)
- *p++ = 0; /* fill in later */
+
+ p = xprt_skip_transport_header(task->tk_xprt, p);
*p++ = req->rq_xid; /* XID */
*p++ = htonl(RPC_CALL); /* CALL */
*p++ = htonl(RPC_VERSION); /* RPC version */
diff --git a/net/sunrpc/pmap_clnt.c b/net/sunrpc/pmap_clnt.c
index 4e81f27..a398575 100644
--- a/net/sunrpc/pmap_clnt.c
+++ b/net/sunrpc/pmap_clnt.c
@@ -26,7 +26,7 @@
#define PMAP_GETPORT 3
static struct rpc_procinfo pmap_procedures[];
-static struct rpc_clnt * pmap_create(char *, struct sockaddr_in *, int);
+static struct rpc_clnt * pmap_create(char *, struct sockaddr_in *, int, int);
static void pmap_getport_done(struct rpc_task *);
static struct rpc_program pmap_program;
static DEFINE_SPINLOCK(pmap_lock);
@@ -65,7 +65,7 @@
map->pm_binding = 1;
spin_unlock(&pmap_lock);
- pmap_clnt = pmap_create(clnt->cl_server, sap, map->pm_prot);
+ pmap_clnt = pmap_create(clnt->cl_server, sap, map->pm_prot, 0);
if (IS_ERR(pmap_clnt)) {
task->tk_status = PTR_ERR(pmap_clnt);
goto bailout;
@@ -112,7 +112,7 @@
NIPQUAD(sin->sin_addr.s_addr), prog, vers, prot);
sprintf(hostname, "%u.%u.%u.%u", NIPQUAD(sin->sin_addr.s_addr));
- pmap_clnt = pmap_create(hostname, sin, prot);
+ pmap_clnt = pmap_create(hostname, sin, prot, 0);
if (IS_ERR(pmap_clnt))
return PTR_ERR(pmap_clnt);
@@ -171,7 +171,7 @@
sin.sin_family = AF_INET;
sin.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
- pmap_clnt = pmap_create("localhost", &sin, IPPROTO_UDP);
+ pmap_clnt = pmap_create("localhost", &sin, IPPROTO_UDP, 1);
if (IS_ERR(pmap_clnt)) {
error = PTR_ERR(pmap_clnt);
dprintk("RPC: couldn't create pmap client. Error = %d\n", error);
@@ -198,7 +198,7 @@
}
static struct rpc_clnt *
-pmap_create(char *hostname, struct sockaddr_in *srvaddr, int proto)
+pmap_create(char *hostname, struct sockaddr_in *srvaddr, int proto, int privileged)
{
struct rpc_xprt *xprt;
struct rpc_clnt *clnt;
@@ -208,6 +208,8 @@
if (IS_ERR(xprt))
return (struct rpc_clnt *)xprt;
xprt->addr.sin_port = htons(RPC_PMAP_PORT);
+ if (!privileged)
+ xprt->resvport = 0;
/* printk("pmap: create clnt\n"); */
clnt = rpc_new_client(xprt, hostname,
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index ded6c63..4f188d0 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -76,25 +76,35 @@
rpc_queue_upcall(struct inode *inode, struct rpc_pipe_msg *msg)
{
struct rpc_inode *rpci = RPC_I(inode);
- int res = 0;
+ int res = -EPIPE;
down(&inode->i_sem);
+ if (rpci->ops == NULL)
+ goto out;
if (rpci->nreaders) {
list_add_tail(&msg->list, &rpci->pipe);
rpci->pipelen += msg->len;
+ res = 0;
} else if (rpci->flags & RPC_PIPE_WAIT_FOR_OPEN) {
if (list_empty(&rpci->pipe))
schedule_delayed_work(&rpci->queue_timeout,
RPC_UPCALL_TIMEOUT);
list_add_tail(&msg->list, &rpci->pipe);
rpci->pipelen += msg->len;
- } else
- res = -EPIPE;
+ res = 0;
+ }
+out:
up(&inode->i_sem);
wake_up(&rpci->waitq);
return res;
}
+static inline void
+rpc_inode_setowner(struct inode *inode, void *private)
+{
+ RPC_I(inode)->private = private;
+}
+
static void
rpc_close_pipes(struct inode *inode)
{
@@ -111,15 +121,10 @@
rpci->ops->release_pipe(inode);
rpci->ops = NULL;
}
+ rpc_inode_setowner(inode, NULL);
up(&inode->i_sem);
}
-static inline void
-rpc_inode_setowner(struct inode *inode, void *private)
-{
- RPC_I(inode)->private = private;
-}
-
static struct inode *
rpc_alloc_inode(struct super_block *sb)
{
@@ -501,7 +506,6 @@
dentry = dvec[--n];
if (dentry->d_inode) {
rpc_close_pipes(dentry->d_inode);
- rpc_inode_setowner(dentry->d_inode, NULL);
simple_unlink(dir, dentry);
}
dput(dentry);
@@ -576,10 +580,8 @@
int error;
shrink_dcache_parent(dentry);
- if (dentry->d_inode) {
+ if (dentry->d_inode)
rpc_close_pipes(dentry->d_inode);
- rpc_inode_setowner(dentry->d_inode, NULL);
- }
if ((error = simple_rmdir(dir, dentry)) != 0)
return error;
if (!error) {
@@ -732,7 +734,6 @@
d_drop(dentry);
if (dentry->d_inode) {
rpc_close_pipes(dentry->d_inode);
- rpc_inode_setowner(dentry->d_inode, NULL);
error = simple_unlink(dir, dentry);
}
dput(dentry);
diff --git a/net/sunrpc/socklib.c b/net/sunrpc/socklib.c
new file mode 100644
index 0000000..8f97e90
--- /dev/null
+++ b/net/sunrpc/socklib.c
@@ -0,0 +1,175 @@
+/*
+ * linux/net/sunrpc/socklib.c
+ *
+ * Common socket helper routines for RPC client and server
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#include <linux/types.h>
+#include <linux/pagemap.h>
+#include <linux/udp.h>
+#include <linux/sunrpc/xdr.h>
+
+
+/**
+ * skb_read_bits - copy some data bits from skb to internal buffer
+ * @desc: sk_buff copy helper
+ * @to: copy destination
+ * @len: number of bytes to copy
+ *
+ * Possibly called several times to iterate over an sk_buff and copy
+ * data out of it.
+ */
+static size_t skb_read_bits(skb_reader_t *desc, void *to, size_t len)
+{
+ if (len > desc->count)
+ len = desc->count;
+ if (skb_copy_bits(desc->skb, desc->offset, to, len))
+ return 0;
+ desc->count -= len;
+ desc->offset += len;
+ return len;
+}
+
+/**
+ * skb_read_and_csum_bits - copy and checksum from skb to buffer
+ * @desc: sk_buff copy helper
+ * @to: copy destination
+ * @len: number of bytes to copy
+ *
+ * Same as skb_read_bits, but calculate a checksum at the same time.
+ */
+static size_t skb_read_and_csum_bits(skb_reader_t *desc, void *to, size_t len)
+{
+ unsigned int csum2, pos;
+
+ if (len > desc->count)
+ len = desc->count;
+ pos = desc->offset;
+ csum2 = skb_copy_and_csum_bits(desc->skb, pos, to, len, 0);
+ desc->csum = csum_block_add(desc->csum, csum2, pos);
+ desc->count -= len;
+ desc->offset += len;
+ return len;
+}
+
+/**
+ * xdr_partial_copy_from_skb - copy data out of an skb
+ * @xdr: target XDR buffer
+ * @base: starting offset
+ * @desc: sk_buff copy helper
+ * @copy_actor: virtual method for copying data
+ *
+ */
+ssize_t xdr_partial_copy_from_skb(struct xdr_buf *xdr, unsigned int base, skb_reader_t *desc, skb_read_actor_t copy_actor)
+{
+ struct page **ppage = xdr->pages;
+ unsigned int len, pglen = xdr->page_len;
+ ssize_t copied = 0;
+ int ret;
+
+ len = xdr->head[0].iov_len;
+ if (base < len) {
+ len -= base;
+ ret = copy_actor(desc, (char *)xdr->head[0].iov_base + base, len);
+ copied += ret;
+ if (ret != len || !desc->count)
+ goto out;
+ base = 0;
+ } else
+ base -= len;
+
+ if (unlikely(pglen == 0))
+ goto copy_tail;
+ if (unlikely(base >= pglen)) {
+ base -= pglen;
+ goto copy_tail;
+ }
+ if (base || xdr->page_base) {
+ pglen -= base;
+ base += xdr->page_base;
+ ppage += base >> PAGE_CACHE_SHIFT;
+ base &= ~PAGE_CACHE_MASK;
+ }
+ do {
+ char *kaddr;
+
+ /* ACL likes to be lazy in allocating pages - ACLs
+ * are small by default but can get huge. */
+ if (unlikely(*ppage == NULL)) {
+ *ppage = alloc_page(GFP_ATOMIC);
+ if (unlikely(*ppage == NULL)) {
+ if (copied == 0)
+ copied = -ENOMEM;
+ goto out;
+ }
+ }
+
+ len = PAGE_CACHE_SIZE;
+ kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA);
+ if (base) {
+ len -= base;
+ if (pglen < len)
+ len = pglen;
+ ret = copy_actor(desc, kaddr + base, len);
+ base = 0;
+ } else {
+ if (pglen < len)
+ len = pglen;
+ ret = copy_actor(desc, kaddr, len);
+ }
+ flush_dcache_page(*ppage);
+ kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA);
+ copied += ret;
+ if (ret != len || !desc->count)
+ goto out;
+ ppage++;
+ } while ((pglen -= len) != 0);
+copy_tail:
+ len = xdr->tail[0].iov_len;
+ if (base < len)
+ copied += copy_actor(desc, (char *)xdr->tail[0].iov_base + base, len - base);
+out:
+ return copied;
+}
+
+/**
+ * csum_partial_copy_to_xdr - checksum and copy data
+ * @xdr: target XDR buffer
+ * @skb: source skb
+ *
+ * We have set things up such that we perform the checksum of the UDP
+ * packet in parallel with the copies into the RPC client iovec. -DaveM
+ */
+int csum_partial_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb)
+{
+ skb_reader_t desc;
+
+ desc.skb = skb;
+ desc.offset = sizeof(struct udphdr);
+ desc.count = skb->len - desc.offset;
+
+ if (skb->ip_summed == CHECKSUM_UNNECESSARY)
+ goto no_checksum;
+
+ desc.csum = csum_partial(skb->data, desc.offset, skb->csum);
+ if (xdr_partial_copy_from_skb(xdr, 0, &desc, skb_read_and_csum_bits) < 0)
+ return -1;
+ if (desc.offset != skb->len) {
+ unsigned int csum2;
+ csum2 = skb_checksum(skb, desc.offset, skb->len - desc.offset, 0);
+ desc.csum = csum_block_add(desc.csum, csum2, desc.offset);
+ }
+ if (desc.count)
+ return -1;
+ if ((unsigned short)csum_fold(desc.csum))
+ return -1;
+ return 0;
+no_checksum:
+ if (xdr_partial_copy_from_skb(xdr, 0, &desc, skb_read_bits) < 0)
+ return -1;
+ if (desc.count)
+ return -1;
+ return 0;
+}
diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c
index ed48ff0..2387e7b 100644
--- a/net/sunrpc/sunrpc_syms.c
+++ b/net/sunrpc/sunrpc_syms.c
@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/socket.h>
#include <linux/sched.h>
#include <linux/uio.h>
#include <linux/unistd.h>
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 691dea4..f16e7cd 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -548,9 +548,6 @@
/*
* Receive a datagram from a UDP socket.
*/
-extern int
-csum_partial_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb);
-
static int
svc_udp_recvfrom(struct svc_rqst *rqstp)
{
diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index 1b9616a..d0c9f46 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -119,8 +119,18 @@
return 0;
}
+unsigned int xprt_udp_slot_table_entries = RPC_DEF_SLOT_TABLE;
+unsigned int xprt_tcp_slot_table_entries = RPC_DEF_SLOT_TABLE;
+unsigned int xprt_min_resvport = RPC_DEF_MIN_RESVPORT;
+EXPORT_SYMBOL(xprt_min_resvport);
+unsigned int xprt_max_resvport = RPC_DEF_MAX_RESVPORT;
+EXPORT_SYMBOL(xprt_max_resvport);
+
+
static unsigned int min_slot_table_size = RPC_MIN_SLOT_TABLE;
static unsigned int max_slot_table_size = RPC_MAX_SLOT_TABLE;
+static unsigned int xprt_min_resvport_limit = RPC_MIN_RESVPORT;
+static unsigned int xprt_max_resvport_limit = RPC_MAX_RESVPORT;
static ctl_table debug_table[] = {
{
@@ -177,6 +187,28 @@
.extra1 = &min_slot_table_size,
.extra2 = &max_slot_table_size
},
+ {
+ .ctl_name = CTL_MIN_RESVPORT,
+ .procname = "min_resvport",
+ .data = &xprt_min_resvport,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &xprt_min_resvport_limit,
+ .extra2 = &xprt_max_resvport_limit
+ },
+ {
+ .ctl_name = CTL_MAX_RESVPORT,
+ .procname = "max_resvport",
+ .data = &xprt_max_resvport,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &xprt_min_resvport_limit,
+ .extra2 = &xprt_max_resvport_limit
+ },
{ .ctl_name = 0 }
};
diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index fde16f4..32df433 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -6,15 +6,12 @@
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
*/
+#include <linux/module.h>
#include <linux/types.h>
-#include <linux/socket.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/pagemap.h>
#include <linux/errno.h>
-#include <linux/in.h>
-#include <linux/net.h>
-#include <net/sock.h>
#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/msg_prot.h>
@@ -176,178 +173,6 @@
xdr->buflen += len;
}
-ssize_t
-xdr_partial_copy_from_skb(struct xdr_buf *xdr, unsigned int base,
- skb_reader_t *desc,
- skb_read_actor_t copy_actor)
-{
- struct page **ppage = xdr->pages;
- unsigned int len, pglen = xdr->page_len;
- ssize_t copied = 0;
- int ret;
-
- len = xdr->head[0].iov_len;
- if (base < len) {
- len -= base;
- ret = copy_actor(desc, (char *)xdr->head[0].iov_base + base, len);
- copied += ret;
- if (ret != len || !desc->count)
- goto out;
- base = 0;
- } else
- base -= len;
-
- if (pglen == 0)
- goto copy_tail;
- if (base >= pglen) {
- base -= pglen;
- goto copy_tail;
- }
- if (base || xdr->page_base) {
- pglen -= base;
- base += xdr->page_base;
- ppage += base >> PAGE_CACHE_SHIFT;
- base &= ~PAGE_CACHE_MASK;
- }
- do {
- char *kaddr;
-
- /* ACL likes to be lazy in allocating pages - ACLs
- * are small by default but can get huge. */
- if (unlikely(*ppage == NULL)) {
- *ppage = alloc_page(GFP_ATOMIC);
- if (unlikely(*ppage == NULL)) {
- if (copied == 0)
- copied = -ENOMEM;
- goto out;
- }
- }
-
- len = PAGE_CACHE_SIZE;
- kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA);
- if (base) {
- len -= base;
- if (pglen < len)
- len = pglen;
- ret = copy_actor(desc, kaddr + base, len);
- base = 0;
- } else {
- if (pglen < len)
- len = pglen;
- ret = copy_actor(desc, kaddr, len);
- }
- flush_dcache_page(*ppage);
- kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA);
- copied += ret;
- if (ret != len || !desc->count)
- goto out;
- ppage++;
- } while ((pglen -= len) != 0);
-copy_tail:
- len = xdr->tail[0].iov_len;
- if (base < len)
- copied += copy_actor(desc, (char *)xdr->tail[0].iov_base + base, len - base);
-out:
- return copied;
-}
-
-
-int
-xdr_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen,
- struct xdr_buf *xdr, unsigned int base, int msgflags)
-{
- struct page **ppage = xdr->pages;
- unsigned int len, pglen = xdr->page_len;
- int err, ret = 0;
- ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int);
-
- len = xdr->head[0].iov_len;
- if (base < len || (addr != NULL && base == 0)) {
- struct kvec iov = {
- .iov_base = xdr->head[0].iov_base + base,
- .iov_len = len - base,
- };
- struct msghdr msg = {
- .msg_name = addr,
- .msg_namelen = addrlen,
- .msg_flags = msgflags,
- };
- if (xdr->len > len)
- msg.msg_flags |= MSG_MORE;
-
- if (iov.iov_len != 0)
- err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len);
- else
- err = kernel_sendmsg(sock, &msg, NULL, 0, 0);
- if (ret == 0)
- ret = err;
- else if (err > 0)
- ret += err;
- if (err != iov.iov_len)
- goto out;
- base = 0;
- } else
- base -= len;
-
- if (pglen == 0)
- goto copy_tail;
- if (base >= pglen) {
- base -= pglen;
- goto copy_tail;
- }
- if (base || xdr->page_base) {
- pglen -= base;
- base += xdr->page_base;
- ppage += base >> PAGE_CACHE_SHIFT;
- base &= ~PAGE_CACHE_MASK;
- }
-
- sendpage = sock->ops->sendpage ? : sock_no_sendpage;
- do {
- int flags = msgflags;
-
- len = PAGE_CACHE_SIZE;
- if (base)
- len -= base;
- if (pglen < len)
- len = pglen;
-
- if (pglen != len || xdr->tail[0].iov_len != 0)
- flags |= MSG_MORE;
-
- /* Hmm... We might be dealing with highmem pages */
- if (PageHighMem(*ppage))
- sendpage = sock_no_sendpage;
- err = sendpage(sock, *ppage, base, len, flags);
- if (ret == 0)
- ret = err;
- else if (err > 0)
- ret += err;
- if (err != len)
- goto out;
- base = 0;
- ppage++;
- } while ((pglen -= len) != 0);
-copy_tail:
- len = xdr->tail[0].iov_len;
- if (base < len) {
- struct kvec iov = {
- .iov_base = xdr->tail[0].iov_base + base,
- .iov_len = len - base,
- };
- struct msghdr msg = {
- .msg_flags = msgflags,
- };
- err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len);
- if (ret == 0)
- ret = err;
- else if (err > 0)
- ret += err;
- }
-out:
- return ret;
-}
-
/*
* Helper routines for doing 'memmove' like operations on a struct xdr_buf
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 3c654e0..6dda386 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -10,12 +10,12 @@
* one is available. Otherwise, it sleeps on the backlog queue
* (xprt_reserve).
* - Next, the caller puts together the RPC message, stuffs it into
- * the request struct, and calls xprt_call().
- * - xprt_call transmits the message and installs the caller on the
- * socket's wait list. At the same time, it installs a timer that
+ * the request struct, and calls xprt_transmit().
+ * - xprt_transmit sends the message and installs the caller on the
+ * transport's wait list. At the same time, it installs a timer that
* is run after the packet's timeout has expired.
* - When a packet arrives, the data_ready handler walks the list of
- * pending requests for that socket. If a matching XID is found, the
+ * pending requests for that transport. If a matching XID is found, the
* caller is woken up, and the timer removed.
* - When no reply arrives within the timeout interval, the timer is
* fired by the kernel and runs xprt_timer(). It either adjusts the
@@ -33,36 +33,17 @@
*
* Copyright (C) 1995-1997, Olaf Kirch <okir@monad.swb.de>
*
- * TCP callback races fixes (C) 1998 Red Hat Software <alan@redhat.com>
- * TCP send fixes (C) 1998 Red Hat Software <alan@redhat.com>
- * TCP NFS related read + write fixes
- * (C) 1999 Dave Airlie, University of Limerick, Ireland <airlied@linux.ie>
- *
- * Rewrite of larges part of the code in order to stabilize TCP stuff.
- * Fix behaviour when socket buffer is full.
- * (C) 1999 Trond Myklebust <trond.myklebust@fys.uio.no>
+ * Transport switch API copyright (C) 2005, Chuck Lever <cel@netapp.com>
*/
+#include <linux/module.h>
+
#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/capability.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/net.h>
-#include <linux/mm.h>
-#include <linux/udp.h>
-#include <linux/tcp.h>
-#include <linux/sunrpc/clnt.h>
-#include <linux/file.h>
+#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/random.h>
-#include <net/sock.h>
-#include <net/checksum.h>
-#include <net/udp.h>
-#include <net/tcp.h>
+#include <linux/sunrpc/clnt.h>
/*
* Local variables
@@ -73,93 +54,62 @@
# define RPCDBG_FACILITY RPCDBG_XPRT
#endif
-#define XPRT_MAX_BACKOFF (8)
-#define XPRT_IDLE_TIMEOUT (5*60*HZ)
-#define XPRT_MAX_RESVPORT (800)
-
/*
* Local functions
*/
static void xprt_request_init(struct rpc_task *, struct rpc_xprt *);
static inline void do_xprt_reserve(struct rpc_task *);
-static void xprt_disconnect(struct rpc_xprt *);
static void xprt_connect_status(struct rpc_task *task);
-static struct rpc_xprt * xprt_setup(int proto, struct sockaddr_in *ap,
- struct rpc_timeout *to);
-static struct socket *xprt_create_socket(struct rpc_xprt *, int, int);
-static void xprt_bind_socket(struct rpc_xprt *, struct socket *);
static int __xprt_get_cong(struct rpc_xprt *, struct rpc_task *);
-static int xprt_clear_backlog(struct rpc_xprt *xprt);
-
-#ifdef RPC_DEBUG_DATA
/*
- * Print the buffer contents (first 128 bytes only--just enough for
- * diropres return).
+ * The transport code maintains an estimate on the maximum number of out-
+ * standing RPC requests, using a smoothed version of the congestion
+ * avoidance implemented in 44BSD. This is basically the Van Jacobson
+ * congestion algorithm: If a retransmit occurs, the congestion window is
+ * halved; otherwise, it is incremented by 1/cwnd when
+ *
+ * - a reply is received and
+ * - a full number of requests are outstanding and
+ * - the congestion window hasn't been updated recently.
*/
-static void
-xprt_pktdump(char *msg, u32 *packet, unsigned int count)
-{
- u8 *buf = (u8 *) packet;
- int j;
+#define RPC_CWNDSHIFT (8U)
+#define RPC_CWNDSCALE (1U << RPC_CWNDSHIFT)
+#define RPC_INITCWND RPC_CWNDSCALE
+#define RPC_MAXCWND(xprt) ((xprt)->max_reqs << RPC_CWNDSHIFT)
- dprintk("RPC: %s\n", msg);
- for (j = 0; j < count && j < 128; j += 4) {
- if (!(j & 31)) {
- if (j)
- dprintk("\n");
- dprintk("0x%04x ", j);
- }
- dprintk("%02x%02x%02x%02x ",
- buf[j], buf[j+1], buf[j+2], buf[j+3]);
- }
- dprintk("\n");
-}
-#else
-static inline void
-xprt_pktdump(char *msg, u32 *packet, unsigned int count)
-{
- /* NOP */
-}
-#endif
+#define RPCXPRT_CONGESTED(xprt) ((xprt)->cong >= (xprt)->cwnd)
-/*
- * Look up RPC transport given an INET socket
+/**
+ * xprt_reserve_xprt - serialize write access to transports
+ * @task: task that is requesting access to the transport
+ *
+ * This prevents mixing the payload of separate requests, and prevents
+ * transport connects from colliding with writes. No congestion control
+ * is provided.
*/
-static inline struct rpc_xprt *
-xprt_from_sock(struct sock *sk)
+int xprt_reserve_xprt(struct rpc_task *task)
{
- return (struct rpc_xprt *) sk->sk_user_data;
-}
-
-/*
- * Serialize write access to sockets, in order to prevent different
- * requests from interfering with each other.
- * Also prevents TCP socket connects from colliding with writes.
- */
-static int
-__xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task)
-{
+ struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_rqst *req = task->tk_rqstp;
- if (test_and_set_bit(XPRT_LOCKED, &xprt->sockstate)) {
+ if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) {
if (task == xprt->snd_task)
return 1;
+ if (task == NULL)
+ return 0;
goto out_sleep;
}
- if (xprt->nocong || __xprt_get_cong(xprt, task)) {
- xprt->snd_task = task;
- if (req) {
- req->rq_bytes_sent = 0;
- req->rq_ntrans++;
- }
- return 1;
+ xprt->snd_task = task;
+ if (req) {
+ req->rq_bytes_sent = 0;
+ req->rq_ntrans++;
}
- smp_mb__before_clear_bit();
- clear_bit(XPRT_LOCKED, &xprt->sockstate);
- smp_mb__after_clear_bit();
+ return 1;
+
out_sleep:
- dprintk("RPC: %4d failed to lock socket %p\n", task->tk_pid, xprt);
+ dprintk("RPC: %4d failed to lock transport %p\n",
+ task->tk_pid, xprt);
task->tk_timeout = 0;
task->tk_status = -EAGAIN;
if (req && req->rq_ntrans)
@@ -169,26 +119,92 @@
return 0;
}
-static inline int
-xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task)
+/*
+ * xprt_reserve_xprt_cong - serialize write access to transports
+ * @task: task that is requesting access to the transport
+ *
+ * Same as xprt_reserve_xprt, but Van Jacobson congestion control is
+ * integrated into the decision of whether a request is allowed to be
+ * woken up and given access to the transport.
+ */
+int xprt_reserve_xprt_cong(struct rpc_task *task)
+{
+ struct rpc_xprt *xprt = task->tk_xprt;
+ struct rpc_rqst *req = task->tk_rqstp;
+
+ if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) {
+ if (task == xprt->snd_task)
+ return 1;
+ goto out_sleep;
+ }
+ if (__xprt_get_cong(xprt, task)) {
+ xprt->snd_task = task;
+ if (req) {
+ req->rq_bytes_sent = 0;
+ req->rq_ntrans++;
+ }
+ return 1;
+ }
+ smp_mb__before_clear_bit();
+ clear_bit(XPRT_LOCKED, &xprt->state);
+ smp_mb__after_clear_bit();
+out_sleep:
+ dprintk("RPC: %4d failed to lock transport %p\n", task->tk_pid, xprt);
+ task->tk_timeout = 0;
+ task->tk_status = -EAGAIN;
+ if (req && req->rq_ntrans)
+ rpc_sleep_on(&xprt->resend, task, NULL, NULL);
+ else
+ rpc_sleep_on(&xprt->sending, task, NULL, NULL);
+ return 0;
+}
+
+static inline int xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task)
{
int retval;
- spin_lock_bh(&xprt->sock_lock);
- retval = __xprt_lock_write(xprt, task);
- spin_unlock_bh(&xprt->sock_lock);
+ spin_lock_bh(&xprt->transport_lock);
+ retval = xprt->ops->reserve_xprt(task);
+ spin_unlock_bh(&xprt->transport_lock);
return retval;
}
+static void __xprt_lock_write_next(struct rpc_xprt *xprt)
+{
+ struct rpc_task *task;
+ struct rpc_rqst *req;
-static void
-__xprt_lock_write_next(struct rpc_xprt *xprt)
+ if (test_and_set_bit(XPRT_LOCKED, &xprt->state))
+ return;
+
+ task = rpc_wake_up_next(&xprt->resend);
+ if (!task) {
+ task = rpc_wake_up_next(&xprt->sending);
+ if (!task)
+ goto out_unlock;
+ }
+
+ req = task->tk_rqstp;
+ xprt->snd_task = task;
+ if (req) {
+ req->rq_bytes_sent = 0;
+ req->rq_ntrans++;
+ }
+ return;
+
+out_unlock:
+ smp_mb__before_clear_bit();
+ clear_bit(XPRT_LOCKED, &xprt->state);
+ smp_mb__after_clear_bit();
+}
+
+static void __xprt_lock_write_next_cong(struct rpc_xprt *xprt)
{
struct rpc_task *task;
- if (test_and_set_bit(XPRT_LOCKED, &xprt->sockstate))
+ if (test_and_set_bit(XPRT_LOCKED, &xprt->state))
return;
- if (!xprt->nocong && RPCXPRT_CONGESTED(xprt))
+ if (RPCXPRT_CONGESTED(xprt))
goto out_unlock;
task = rpc_wake_up_next(&xprt->resend);
if (!task) {
@@ -196,7 +212,7 @@
if (!task)
goto out_unlock;
}
- if (xprt->nocong || __xprt_get_cong(xprt, task)) {
+ if (__xprt_get_cong(xprt, task)) {
struct rpc_rqst *req = task->tk_rqstp;
xprt->snd_task = task;
if (req) {
@@ -207,87 +223,52 @@
}
out_unlock:
smp_mb__before_clear_bit();
- clear_bit(XPRT_LOCKED, &xprt->sockstate);
+ clear_bit(XPRT_LOCKED, &xprt->state);
smp_mb__after_clear_bit();
}
-/*
- * Releases the socket for use by other requests.
+/**
+ * xprt_release_xprt - allow other requests to use a transport
+ * @xprt: transport with other tasks potentially waiting
+ * @task: task that is releasing access to the transport
+ *
+ * Note that "task" can be NULL. No congestion control is provided.
*/
-static void
-__xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task)
+void xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task)
{
if (xprt->snd_task == task) {
xprt->snd_task = NULL;
smp_mb__before_clear_bit();
- clear_bit(XPRT_LOCKED, &xprt->sockstate);
+ clear_bit(XPRT_LOCKED, &xprt->state);
smp_mb__after_clear_bit();
__xprt_lock_write_next(xprt);
}
}
-static inline void
-xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task)
+/**
+ * xprt_release_xprt_cong - allow other requests to use a transport
+ * @xprt: transport with other tasks potentially waiting
+ * @task: task that is releasing access to the transport
+ *
+ * Note that "task" can be NULL. Another task is awoken to use the
+ * transport if the transport's congestion window allows it.
+ */
+void xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task)
{
- spin_lock_bh(&xprt->sock_lock);
- __xprt_release_write(xprt, task);
- spin_unlock_bh(&xprt->sock_lock);
+ if (xprt->snd_task == task) {
+ xprt->snd_task = NULL;
+ smp_mb__before_clear_bit();
+ clear_bit(XPRT_LOCKED, &xprt->state);
+ smp_mb__after_clear_bit();
+ __xprt_lock_write_next_cong(xprt);
+ }
}
-/*
- * Write data to socket.
- */
-static inline int
-xprt_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req)
+static inline void xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task)
{
- struct socket *sock = xprt->sock;
- struct xdr_buf *xdr = &req->rq_snd_buf;
- struct sockaddr *addr = NULL;
- int addrlen = 0;
- unsigned int skip;
- int result;
-
- if (!sock)
- return -ENOTCONN;
-
- xprt_pktdump("packet data:",
- req->rq_svec->iov_base,
- req->rq_svec->iov_len);
-
- /* For UDP, we need to provide an address */
- if (!xprt->stream) {
- addr = (struct sockaddr *) &xprt->addr;
- addrlen = sizeof(xprt->addr);
- }
- /* Dont repeat bytes */
- skip = req->rq_bytes_sent;
-
- clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
- result = xdr_sendpages(sock, addr, addrlen, xdr, skip, MSG_DONTWAIT);
-
- dprintk("RPC: xprt_sendmsg(%d) = %d\n", xdr->len - skip, result);
-
- if (result >= 0)
- return result;
-
- switch (result) {
- case -ECONNREFUSED:
- /* When the server has died, an ICMP port unreachable message
- * prompts ECONNREFUSED.
- */
- case -EAGAIN:
- break;
- case -ECONNRESET:
- case -ENOTCONN:
- case -EPIPE:
- /* connection broken */
- if (xprt->stream)
- result = -ENOTCONN;
- break;
- default:
- printk(KERN_NOTICE "RPC: sendmsg returned error %d\n", -result);
- }
- return result;
+ spin_lock_bh(&xprt->transport_lock);
+ xprt->ops->release_xprt(xprt, task);
+ spin_unlock_bh(&xprt->transport_lock);
}
/*
@@ -321,26 +302,40 @@
return;
req->rq_cong = 0;
xprt->cong -= RPC_CWNDSCALE;
- __xprt_lock_write_next(xprt);
+ __xprt_lock_write_next_cong(xprt);
}
-/*
- * Adjust RPC congestion window
+/**
+ * xprt_release_rqst_cong - housekeeping when request is complete
+ * @task: RPC request that recently completed
+ *
+ * Useful for transports that require congestion control.
+ */
+void xprt_release_rqst_cong(struct rpc_task *task)
+{
+ __xprt_put_cong(task->tk_xprt, task->tk_rqstp);
+}
+
+/**
+ * xprt_adjust_cwnd - adjust transport congestion window
+ * @task: recently completed RPC request used to adjust window
+ * @result: result code of completed RPC request
+ *
* We use a time-smoothed congestion estimator to avoid heavy oscillation.
*/
-static void
-xprt_adjust_cwnd(struct rpc_xprt *xprt, int result)
+void xprt_adjust_cwnd(struct rpc_task *task, int result)
{
- unsigned long cwnd;
+ struct rpc_rqst *req = task->tk_rqstp;
+ struct rpc_xprt *xprt = task->tk_xprt;
+ unsigned long cwnd = xprt->cwnd;
- cwnd = xprt->cwnd;
if (result >= 0 && cwnd <= xprt->cong) {
/* The (cwnd >> 1) term makes sure
* the result gets rounded properly. */
cwnd += (RPC_CWNDSCALE * RPC_CWNDSCALE + (cwnd >> 1)) / cwnd;
if (cwnd > RPC_MAXCWND(xprt))
cwnd = RPC_MAXCWND(xprt);
- __xprt_lock_write_next(xprt);
+ __xprt_lock_write_next_cong(xprt);
} else if (result == -ETIMEDOUT) {
cwnd >>= 1;
if (cwnd < RPC_CWNDSCALE)
@@ -349,11 +344,89 @@
dprintk("RPC: cong %ld, cwnd was %ld, now %ld\n",
xprt->cong, xprt->cwnd, cwnd);
xprt->cwnd = cwnd;
+ __xprt_put_cong(xprt, req);
+}
+
+/**
+ * xprt_wake_pending_tasks - wake all tasks on a transport's pending queue
+ * @xprt: transport with waiting tasks
+ * @status: result code to plant in each task before waking it
+ *
+ */
+void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status)
+{
+ if (status < 0)
+ rpc_wake_up_status(&xprt->pending, status);
+ else
+ rpc_wake_up(&xprt->pending);
+}
+
+/**
+ * xprt_wait_for_buffer_space - wait for transport output buffer to clear
+ * @task: task to be put to sleep
+ *
+ */
+void xprt_wait_for_buffer_space(struct rpc_task *task)
+{
+ struct rpc_rqst *req = task->tk_rqstp;
+ struct rpc_xprt *xprt = req->rq_xprt;
+
+ task->tk_timeout = req->rq_timeout;
+ rpc_sleep_on(&xprt->pending, task, NULL, NULL);
+}
+
+/**
+ * xprt_write_space - wake the task waiting for transport output buffer space
+ * @xprt: transport with waiting tasks
+ *
+ * Can be called in a soft IRQ context, so xprt_write_space never sleeps.
+ */
+void xprt_write_space(struct rpc_xprt *xprt)
+{
+ if (unlikely(xprt->shutdown))
+ return;
+
+ spin_lock_bh(&xprt->transport_lock);
+ if (xprt->snd_task) {
+ dprintk("RPC: write space: waking waiting task on xprt %p\n",
+ xprt);
+ rpc_wake_up_task(xprt->snd_task);
+ }
+ spin_unlock_bh(&xprt->transport_lock);
+}
+
+/**
+ * xprt_set_retrans_timeout_def - set a request's retransmit timeout
+ * @task: task whose timeout is to be set
+ *
+ * Set a request's retransmit timeout based on the transport's
+ * default timeout parameters. Used by transports that don't adjust
+ * the retransmit timeout based on round-trip time estimation.
+ */
+void xprt_set_retrans_timeout_def(struct rpc_task *task)
+{
+ task->tk_timeout = task->tk_rqstp->rq_timeout;
}
/*
- * Reset the major timeout value
+ * xprt_set_retrans_timeout_rtt - set a request's retransmit timeout
+ * @task: task whose timeout is to be set
+ *
+ * Set a request's retransmit timeout using the RTT estimator.
*/
+void xprt_set_retrans_timeout_rtt(struct rpc_task *task)
+{
+ int timer = task->tk_msg.rpc_proc->p_timer;
+ struct rpc_rtt *rtt = task->tk_client->cl_rtt;
+ struct rpc_rqst *req = task->tk_rqstp;
+ unsigned long max_timeout = req->rq_xprt->timeout.to_maxval;
+
+ task->tk_timeout = rpc_calc_rto(rtt, timer);
+ task->tk_timeout <<= rpc_ntimeo(rtt, timer) + req->rq_retries;
+ if (task->tk_timeout > max_timeout || task->tk_timeout == 0)
+ task->tk_timeout = max_timeout;
+}
+
static void xprt_reset_majortimeo(struct rpc_rqst *req)
{
struct rpc_timeout *to = &req->rq_xprt->timeout;
@@ -368,8 +441,10 @@
req->rq_majortimeo += jiffies;
}
-/*
- * Adjust timeout values etc for next retransmit
+/**
+ * xprt_adjust_timeout - adjust timeout values for next retransmit
+ * @req: RPC request containing parameters to use for the adjustment
+ *
*/
int xprt_adjust_timeout(struct rpc_rqst *req)
{
@@ -391,9 +466,9 @@
req->rq_retries = 0;
xprt_reset_majortimeo(req);
/* Reset the RTT counters == "slow start" */
- spin_lock_bh(&xprt->sock_lock);
+ spin_lock_bh(&xprt->transport_lock);
rpc_init_rtt(req->rq_task->tk_client->cl_rtt, to->to_initval);
- spin_unlock_bh(&xprt->sock_lock);
+ spin_unlock_bh(&xprt->transport_lock);
pprintk("RPC: %lu timeout\n", jiffies);
status = -ETIMEDOUT;
}
@@ -405,133 +480,52 @@
return status;
}
-/*
- * Close down a transport socket
- */
-static void
-xprt_close(struct rpc_xprt *xprt)
-{
- struct socket *sock = xprt->sock;
- struct sock *sk = xprt->inet;
-
- if (!sk)
- return;
-
- write_lock_bh(&sk->sk_callback_lock);
- xprt->inet = NULL;
- xprt->sock = NULL;
-
- sk->sk_user_data = NULL;
- sk->sk_data_ready = xprt->old_data_ready;
- sk->sk_state_change = xprt->old_state_change;
- sk->sk_write_space = xprt->old_write_space;
- write_unlock_bh(&sk->sk_callback_lock);
-
- sk->sk_no_check = 0;
-
- sock_release(sock);
-}
-
-static void
-xprt_socket_autoclose(void *args)
+static void xprt_autoclose(void *args)
{
struct rpc_xprt *xprt = (struct rpc_xprt *)args;
xprt_disconnect(xprt);
- xprt_close(xprt);
+ xprt->ops->close(xprt);
xprt_release_write(xprt, NULL);
}
-/*
- * Mark a transport as disconnected
+/**
+ * xprt_disconnect - mark a transport as disconnected
+ * @xprt: transport to flag for disconnect
+ *
*/
-static void
-xprt_disconnect(struct rpc_xprt *xprt)
+void xprt_disconnect(struct rpc_xprt *xprt)
{
dprintk("RPC: disconnected transport %p\n", xprt);
- spin_lock_bh(&xprt->sock_lock);
+ spin_lock_bh(&xprt->transport_lock);
xprt_clear_connected(xprt);
- rpc_wake_up_status(&xprt->pending, -ENOTCONN);
- spin_unlock_bh(&xprt->sock_lock);
+ xprt_wake_pending_tasks(xprt, -ENOTCONN);
+ spin_unlock_bh(&xprt->transport_lock);
}
-/*
- * Used to allow disconnection when we've been idle
- */
static void
xprt_init_autodisconnect(unsigned long data)
{
struct rpc_xprt *xprt = (struct rpc_xprt *)data;
- spin_lock(&xprt->sock_lock);
+ spin_lock(&xprt->transport_lock);
if (!list_empty(&xprt->recv) || xprt->shutdown)
goto out_abort;
- if (test_and_set_bit(XPRT_LOCKED, &xprt->sockstate))
+ if (test_and_set_bit(XPRT_LOCKED, &xprt->state))
goto out_abort;
- spin_unlock(&xprt->sock_lock);
- /* Let keventd close the socket */
- if (test_bit(XPRT_CONNECTING, &xprt->sockstate) != 0)
+ spin_unlock(&xprt->transport_lock);
+ if (xprt_connecting(xprt))
xprt_release_write(xprt, NULL);
else
schedule_work(&xprt->task_cleanup);
return;
out_abort:
- spin_unlock(&xprt->sock_lock);
+ spin_unlock(&xprt->transport_lock);
}
-static void xprt_socket_connect(void *args)
-{
- struct rpc_xprt *xprt = (struct rpc_xprt *)args;
- struct socket *sock = xprt->sock;
- int status = -EIO;
-
- if (xprt->shutdown || xprt->addr.sin_port == 0)
- goto out;
-
- /*
- * Start by resetting any existing state
- */
- xprt_close(xprt);
- sock = xprt_create_socket(xprt, xprt->prot, xprt->resvport);
- if (sock == NULL) {
- /* couldn't create socket or bind to reserved port;
- * this is likely a permanent error, so cause an abort */
- goto out;
- }
- xprt_bind_socket(xprt, sock);
- xprt_sock_setbufsize(xprt);
-
- status = 0;
- if (!xprt->stream)
- goto out;
-
- /*
- * Tell the socket layer to start connecting...
- */
- status = sock->ops->connect(sock, (struct sockaddr *) &xprt->addr,
- sizeof(xprt->addr), O_NONBLOCK);
- dprintk("RPC: %p connect status %d connected %d sock state %d\n",
- xprt, -status, xprt_connected(xprt), sock->sk->sk_state);
- if (status < 0) {
- switch (status) {
- case -EINPROGRESS:
- case -EALREADY:
- goto out_clear;
- }
- }
-out:
- if (status < 0)
- rpc_wake_up_status(&xprt->pending, status);
- else
- rpc_wake_up(&xprt->pending);
-out_clear:
- smp_mb__before_clear_bit();
- clear_bit(XPRT_CONNECTING, &xprt->sockstate);
- smp_mb__after_clear_bit();
-}
-
-/*
- * Attempt to connect a TCP socket.
+/**
+ * xprt_connect - schedule a transport connect operation
+ * @task: RPC task that is requesting the connect
*
*/
void xprt_connect(struct rpc_task *task)
@@ -552,37 +546,19 @@
if (!xprt_lock_write(xprt, task))
return;
if (xprt_connected(xprt))
- goto out_write;
+ xprt_release_write(xprt, task);
+ else {
+ if (task->tk_rqstp)
+ task->tk_rqstp->rq_bytes_sent = 0;
- if (task->tk_rqstp)
- task->tk_rqstp->rq_bytes_sent = 0;
-
- task->tk_timeout = RPC_CONNECT_TIMEOUT;
- rpc_sleep_on(&xprt->pending, task, xprt_connect_status, NULL);
- if (!test_and_set_bit(XPRT_CONNECTING, &xprt->sockstate)) {
- /* Note: if we are here due to a dropped connection
- * we delay reconnecting by RPC_REESTABLISH_TIMEOUT/HZ
- * seconds
- */
- if (xprt->sock != NULL)
- schedule_delayed_work(&xprt->sock_connect,
- RPC_REESTABLISH_TIMEOUT);
- else {
- schedule_work(&xprt->sock_connect);
- if (!RPC_IS_ASYNC(task))
- flush_scheduled_work();
- }
+ task->tk_timeout = xprt->connect_timeout;
+ rpc_sleep_on(&xprt->pending, task, xprt_connect_status, NULL);
+ xprt->ops->connect(task);
}
return;
- out_write:
- xprt_release_write(xprt, task);
}
-/*
- * We arrive here when awoken from waiting on connection establishment.
- */
-static void
-xprt_connect_status(struct rpc_task *task)
+static void xprt_connect_status(struct rpc_task *task)
{
struct rpc_xprt *xprt = task->tk_xprt;
@@ -592,31 +568,42 @@
return;
}
- /* if soft mounted, just cause this RPC to fail */
- if (RPC_IS_SOFT(task))
- task->tk_status = -EIO;
-
switch (task->tk_status) {
case -ECONNREFUSED:
case -ECONNRESET:
+ dprintk("RPC: %4d xprt_connect_status: server %s refused connection\n",
+ task->tk_pid, task->tk_client->cl_server);
+ break;
case -ENOTCONN:
- return;
+ dprintk("RPC: %4d xprt_connect_status: connection broken\n",
+ task->tk_pid);
+ break;
case -ETIMEDOUT:
- dprintk("RPC: %4d xprt_connect_status: timed out\n",
+ dprintk("RPC: %4d xprt_connect_status: connect attempt timed out\n",
task->tk_pid);
break;
default:
- printk(KERN_ERR "RPC: error %d connecting to server %s\n",
- -task->tk_status, task->tk_client->cl_server);
+ dprintk("RPC: %4d xprt_connect_status: error %d connecting to server %s\n",
+ task->tk_pid, -task->tk_status, task->tk_client->cl_server);
+ xprt_release_write(xprt, task);
+ task->tk_status = -EIO;
+ return;
}
- xprt_release_write(xprt, task);
+
+ /* if soft mounted, just cause this RPC to fail */
+ if (RPC_IS_SOFT(task)) {
+ xprt_release_write(xprt, task);
+ task->tk_status = -EIO;
+ }
}
-/*
- * Look up the RPC request corresponding to a reply, and then lock it.
+/**
+ * xprt_lookup_rqst - find an RPC request corresponding to an XID
+ * @xprt: transport on which the original request was transmitted
+ * @xid: RPC XID of incoming reply
+ *
*/
-static inline struct rpc_rqst *
-xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid)
+struct rpc_rqst *xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid)
{
struct list_head *pos;
struct rpc_rqst *req = NULL;
@@ -631,556 +618,68 @@
return req;
}
-/*
- * Complete reply received.
- * The TCP code relies on us to remove the request from xprt->pending.
+/**
+ * xprt_update_rtt - update an RPC client's RTT state after receiving a reply
+ * @task: RPC request that recently completed
+ *
*/
-static void
-xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied)
+void xprt_update_rtt(struct rpc_task *task)
{
- struct rpc_task *task = req->rq_task;
- struct rpc_clnt *clnt = task->tk_client;
+ struct rpc_rqst *req = task->tk_rqstp;
+ struct rpc_rtt *rtt = task->tk_client->cl_rtt;
+ unsigned timer = task->tk_msg.rpc_proc->p_timer;
- /* Adjust congestion window */
- if (!xprt->nocong) {
- unsigned timer = task->tk_msg.rpc_proc->p_timer;
- xprt_adjust_cwnd(xprt, copied);
- __xprt_put_cong(xprt, req);
- if (timer) {
- if (req->rq_ntrans == 1)
- rpc_update_rtt(clnt->cl_rtt, timer,
- (long)jiffies - req->rq_xtime);
- rpc_set_timeo(clnt->cl_rtt, timer, req->rq_ntrans - 1);
- }
+ if (timer) {
+ if (req->rq_ntrans == 1)
+ rpc_update_rtt(rtt, timer,
+ (long)jiffies - req->rq_xtime);
+ rpc_set_timeo(rtt, timer, req->rq_ntrans - 1);
}
+}
-#ifdef RPC_PROFILE
- /* Profile only reads for now */
- if (copied > 1024) {
- static unsigned long nextstat;
- static unsigned long pkt_rtt, pkt_len, pkt_cnt;
+/**
+ * xprt_complete_rqst - called when reply processing is complete
+ * @task: RPC request that recently completed
+ * @copied: actual number of bytes received from the transport
+ *
+ * Caller holds transport lock.
+ */
+void xprt_complete_rqst(struct rpc_task *task, int copied)
+{
+ struct rpc_rqst *req = task->tk_rqstp;
- pkt_cnt++;
- pkt_len += req->rq_slen + copied;
- pkt_rtt += jiffies - req->rq_xtime;
- if (time_before(nextstat, jiffies)) {
- printk("RPC: %lu %ld cwnd\n", jiffies, xprt->cwnd);
- printk("RPC: %ld %ld %ld %ld stat\n",
- jiffies, pkt_cnt, pkt_len, pkt_rtt);
- pkt_rtt = pkt_len = pkt_cnt = 0;
- nextstat = jiffies + 5 * HZ;
- }
- }
-#endif
+ dprintk("RPC: %5u xid %08x complete (%d bytes received)\n",
+ task->tk_pid, ntohl(req->rq_xid), copied);
- dprintk("RPC: %4d has input (%d bytes)\n", task->tk_pid, copied);
list_del_init(&req->rq_list);
req->rq_received = req->rq_private_buf.len = copied;
-
- /* ... and wake up the process. */
rpc_wake_up_task(task);
- return;
}
-static size_t
-skb_read_bits(skb_reader_t *desc, void *to, size_t len)
+static void xprt_timer(struct rpc_task *task)
{
- if (len > desc->count)
- len = desc->count;
- if (skb_copy_bits(desc->skb, desc->offset, to, len))
- return 0;
- desc->count -= len;
- desc->offset += len;
- return len;
-}
-
-static size_t
-skb_read_and_csum_bits(skb_reader_t *desc, void *to, size_t len)
-{
- unsigned int csum2, pos;
-
- if (len > desc->count)
- len = desc->count;
- pos = desc->offset;
- csum2 = skb_copy_and_csum_bits(desc->skb, pos, to, len, 0);
- desc->csum = csum_block_add(desc->csum, csum2, pos);
- desc->count -= len;
- desc->offset += len;
- return len;
-}
-
-/*
- * We have set things up such that we perform the checksum of the UDP
- * packet in parallel with the copies into the RPC client iovec. -DaveM
- */
-int
-csum_partial_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb)
-{
- skb_reader_t desc;
-
- desc.skb = skb;
- desc.offset = sizeof(struct udphdr);
- desc.count = skb->len - desc.offset;
-
- if (skb->ip_summed == CHECKSUM_UNNECESSARY)
- goto no_checksum;
-
- desc.csum = csum_partial(skb->data, desc.offset, skb->csum);
- if (xdr_partial_copy_from_skb(xdr, 0, &desc, skb_read_and_csum_bits) < 0)
- return -1;
- if (desc.offset != skb->len) {
- unsigned int csum2;
- csum2 = skb_checksum(skb, desc.offset, skb->len - desc.offset, 0);
- desc.csum = csum_block_add(desc.csum, csum2, desc.offset);
- }
- if (desc.count)
- return -1;
- if ((unsigned short)csum_fold(desc.csum))
- return -1;
- return 0;
-no_checksum:
- if (xdr_partial_copy_from_skb(xdr, 0, &desc, skb_read_bits) < 0)
- return -1;
- if (desc.count)
- return -1;
- return 0;
-}
-
-/*
- * Input handler for RPC replies. Called from a bottom half and hence
- * atomic.
- */
-static void
-udp_data_ready(struct sock *sk, int len)
-{
- struct rpc_task *task;
- struct rpc_xprt *xprt;
- struct rpc_rqst *rovr;
- struct sk_buff *skb;
- int err, repsize, copied;
- u32 _xid, *xp;
-
- read_lock(&sk->sk_callback_lock);
- dprintk("RPC: udp_data_ready...\n");
- if (!(xprt = xprt_from_sock(sk))) {
- printk("RPC: udp_data_ready request not found!\n");
- goto out;
- }
-
- dprintk("RPC: udp_data_ready client %p\n", xprt);
-
- if ((skb = skb_recv_datagram(sk, 0, 1, &err)) == NULL)
- goto out;
-
- if (xprt->shutdown)
- goto dropit;
-
- repsize = skb->len - sizeof(struct udphdr);
- if (repsize < 4) {
- printk("RPC: impossible RPC reply size %d!\n", repsize);
- goto dropit;
- }
-
- /* Copy the XID from the skb... */
- xp = skb_header_pointer(skb, sizeof(struct udphdr),
- sizeof(_xid), &_xid);
- if (xp == NULL)
- goto dropit;
-
- /* Look up and lock the request corresponding to the given XID */
- spin_lock(&xprt->sock_lock);
- rovr = xprt_lookup_rqst(xprt, *xp);
- if (!rovr)
- goto out_unlock;
- task = rovr->rq_task;
-
- dprintk("RPC: %4d received reply\n", task->tk_pid);
-
- if ((copied = rovr->rq_private_buf.buflen) > repsize)
- copied = repsize;
-
- /* Suck it into the iovec, verify checksum if not done by hw. */
- if (csum_partial_copy_to_xdr(&rovr->rq_private_buf, skb))
- goto out_unlock;
-
- /* Something worked... */
- dst_confirm(skb->dst);
-
- xprt_complete_rqst(xprt, rovr, copied);
-
- out_unlock:
- spin_unlock(&xprt->sock_lock);
- dropit:
- skb_free_datagram(sk, skb);
- out:
- read_unlock(&sk->sk_callback_lock);
-}
-
-/*
- * Copy from an skb into memory and shrink the skb.
- */
-static inline size_t
-tcp_copy_data(skb_reader_t *desc, void *p, size_t len)
-{
- if (len > desc->count)
- len = desc->count;
- if (skb_copy_bits(desc->skb, desc->offset, p, len)) {
- dprintk("RPC: failed to copy %zu bytes from skb. %zu bytes remain\n",
- len, desc->count);
- return 0;
- }
- desc->offset += len;
- desc->count -= len;
- dprintk("RPC: copied %zu bytes from skb. %zu bytes remain\n",
- len, desc->count);
- return len;
-}
-
-/*
- * TCP read fragment marker
- */
-static inline void
-tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc)
-{
- size_t len, used;
- char *p;
-
- p = ((char *) &xprt->tcp_recm) + xprt->tcp_offset;
- len = sizeof(xprt->tcp_recm) - xprt->tcp_offset;
- used = tcp_copy_data(desc, p, len);
- xprt->tcp_offset += used;
- if (used != len)
- return;
- xprt->tcp_reclen = ntohl(xprt->tcp_recm);
- if (xprt->tcp_reclen & 0x80000000)
- xprt->tcp_flags |= XPRT_LAST_FRAG;
- else
- xprt->tcp_flags &= ~XPRT_LAST_FRAG;
- xprt->tcp_reclen &= 0x7fffffff;
- xprt->tcp_flags &= ~XPRT_COPY_RECM;
- xprt->tcp_offset = 0;
- /* Sanity check of the record length */
- if (xprt->tcp_reclen < 4) {
- printk(KERN_ERR "RPC: Invalid TCP record fragment length\n");
- xprt_disconnect(xprt);
- }
- dprintk("RPC: reading TCP record fragment of length %d\n",
- xprt->tcp_reclen);
-}
-
-static void
-tcp_check_recm(struct rpc_xprt *xprt)
-{
- dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u, tcp_flags = %lx\n",
- xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen, xprt->tcp_flags);
- if (xprt->tcp_offset == xprt->tcp_reclen) {
- xprt->tcp_flags |= XPRT_COPY_RECM;
- xprt->tcp_offset = 0;
- if (xprt->tcp_flags & XPRT_LAST_FRAG) {
- xprt->tcp_flags &= ~XPRT_COPY_DATA;
- xprt->tcp_flags |= XPRT_COPY_XID;
- xprt->tcp_copied = 0;
- }
- }
-}
-
-/*
- * TCP read xid
- */
-static inline void
-tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc)
-{
- size_t len, used;
- char *p;
-
- len = sizeof(xprt->tcp_xid) - xprt->tcp_offset;
- dprintk("RPC: reading XID (%Zu bytes)\n", len);
- p = ((char *) &xprt->tcp_xid) + xprt->tcp_offset;
- used = tcp_copy_data(desc, p, len);
- xprt->tcp_offset += used;
- if (used != len)
- return;
- xprt->tcp_flags &= ~XPRT_COPY_XID;
- xprt->tcp_flags |= XPRT_COPY_DATA;
- xprt->tcp_copied = 4;
- dprintk("RPC: reading reply for XID %08x\n",
- ntohl(xprt->tcp_xid));
- tcp_check_recm(xprt);
-}
-
-/*
- * TCP read and complete request
- */
-static inline void
-tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc)
-{
- struct rpc_rqst *req;
- struct xdr_buf *rcvbuf;
- size_t len;
- ssize_t r;
-
- /* Find and lock the request corresponding to this xid */
- spin_lock(&xprt->sock_lock);
- req = xprt_lookup_rqst(xprt, xprt->tcp_xid);
- if (!req) {
- xprt->tcp_flags &= ~XPRT_COPY_DATA;
- dprintk("RPC: XID %08x request not found!\n",
- ntohl(xprt->tcp_xid));
- spin_unlock(&xprt->sock_lock);
- return;
- }
-
- rcvbuf = &req->rq_private_buf;
- len = desc->count;
- if (len > xprt->tcp_reclen - xprt->tcp_offset) {
- skb_reader_t my_desc;
-
- len = xprt->tcp_reclen - xprt->tcp_offset;
- memcpy(&my_desc, desc, sizeof(my_desc));
- my_desc.count = len;
- r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied,
- &my_desc, tcp_copy_data);
- desc->count -= r;
- desc->offset += r;
- } else
- r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied,
- desc, tcp_copy_data);
-
- if (r > 0) {
- xprt->tcp_copied += r;
- xprt->tcp_offset += r;
- }
- if (r != len) {
- /* Error when copying to the receive buffer,
- * usually because we weren't able to allocate
- * additional buffer pages. All we can do now
- * is turn off XPRT_COPY_DATA, so the request
- * will not receive any additional updates,
- * and time out.
- * Any remaining data from this record will
- * be discarded.
- */
- xprt->tcp_flags &= ~XPRT_COPY_DATA;
- dprintk("RPC: XID %08x truncated request\n",
- ntohl(xprt->tcp_xid));
- dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n",
- xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen);
- goto out;
- }
-
- dprintk("RPC: XID %08x read %Zd bytes\n",
- ntohl(xprt->tcp_xid), r);
- dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n",
- xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen);
-
- if (xprt->tcp_copied == req->rq_private_buf.buflen)
- xprt->tcp_flags &= ~XPRT_COPY_DATA;
- else if (xprt->tcp_offset == xprt->tcp_reclen) {
- if (xprt->tcp_flags & XPRT_LAST_FRAG)
- xprt->tcp_flags &= ~XPRT_COPY_DATA;
- }
-
-out:
- if (!(xprt->tcp_flags & XPRT_COPY_DATA)) {
- dprintk("RPC: %4d received reply complete\n",
- req->rq_task->tk_pid);
- xprt_complete_rqst(xprt, req, xprt->tcp_copied);
- }
- spin_unlock(&xprt->sock_lock);
- tcp_check_recm(xprt);
-}
-
-/*
- * TCP discard extra bytes from a short read
- */
-static inline void
-tcp_read_discard(struct rpc_xprt *xprt, skb_reader_t *desc)
-{
- size_t len;
-
- len = xprt->tcp_reclen - xprt->tcp_offset;
- if (len > desc->count)
- len = desc->count;
- desc->count -= len;
- desc->offset += len;
- xprt->tcp_offset += len;
- dprintk("RPC: discarded %Zu bytes\n", len);
- tcp_check_recm(xprt);
-}
-
-/*
- * TCP record receive routine
- * We first have to grab the record marker, then the XID, then the data.
- */
-static int
-tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb,
- unsigned int offset, size_t len)
-{
- struct rpc_xprt *xprt = rd_desc->arg.data;
- skb_reader_t desc = {
- .skb = skb,
- .offset = offset,
- .count = len,
- .csum = 0
- };
-
- dprintk("RPC: tcp_data_recv\n");
- do {
- /* Read in a new fragment marker if necessary */
- /* Can we ever really expect to get completely empty fragments? */
- if (xprt->tcp_flags & XPRT_COPY_RECM) {
- tcp_read_fraghdr(xprt, &desc);
- continue;
- }
- /* Read in the xid if necessary */
- if (xprt->tcp_flags & XPRT_COPY_XID) {
- tcp_read_xid(xprt, &desc);
- continue;
- }
- /* Read in the request data */
- if (xprt->tcp_flags & XPRT_COPY_DATA) {
- tcp_read_request(xprt, &desc);
- continue;
- }
- /* Skip over any trailing bytes on short reads */
- tcp_read_discard(xprt, &desc);
- } while (desc.count);
- dprintk("RPC: tcp_data_recv done\n");
- return len - desc.count;
-}
-
-static void tcp_data_ready(struct sock *sk, int bytes)
-{
- struct rpc_xprt *xprt;
- read_descriptor_t rd_desc;
-
- read_lock(&sk->sk_callback_lock);
- dprintk("RPC: tcp_data_ready...\n");
- if (!(xprt = xprt_from_sock(sk))) {
- printk("RPC: tcp_data_ready socket info not found!\n");
- goto out;
- }
- if (xprt->shutdown)
- goto out;
-
- /* We use rd_desc to pass struct xprt to tcp_data_recv */
- rd_desc.arg.data = xprt;
- rd_desc.count = 65536;
- tcp_read_sock(sk, &rd_desc, tcp_data_recv);
-out:
- read_unlock(&sk->sk_callback_lock);
-}
-
-static void
-tcp_state_change(struct sock *sk)
-{
- struct rpc_xprt *xprt;
-
- read_lock(&sk->sk_callback_lock);
- if (!(xprt = xprt_from_sock(sk)))
- goto out;
- dprintk("RPC: tcp_state_change client %p...\n", xprt);
- dprintk("RPC: state %x conn %d dead %d zapped %d\n",
- sk->sk_state, xprt_connected(xprt),
- sock_flag(sk, SOCK_DEAD),
- sock_flag(sk, SOCK_ZAPPED));
-
- switch (sk->sk_state) {
- case TCP_ESTABLISHED:
- spin_lock_bh(&xprt->sock_lock);
- if (!xprt_test_and_set_connected(xprt)) {
- /* Reset TCP record info */
- xprt->tcp_offset = 0;
- xprt->tcp_reclen = 0;
- xprt->tcp_copied = 0;
- xprt->tcp_flags = XPRT_COPY_RECM | XPRT_COPY_XID;
- rpc_wake_up(&xprt->pending);
- }
- spin_unlock_bh(&xprt->sock_lock);
- break;
- case TCP_SYN_SENT:
- case TCP_SYN_RECV:
- break;
- default:
- xprt_disconnect(xprt);
- break;
- }
- out:
- read_unlock(&sk->sk_callback_lock);
-}
-
-/*
- * Called when more output buffer space is available for this socket.
- * We try not to wake our writers until they can make "significant"
- * progress, otherwise we'll waste resources thrashing sock_sendmsg
- * with a bunch of small requests.
- */
-static void
-xprt_write_space(struct sock *sk)
-{
- struct rpc_xprt *xprt;
- struct socket *sock;
-
- read_lock(&sk->sk_callback_lock);
- if (!(xprt = xprt_from_sock(sk)) || !(sock = sk->sk_socket))
- goto out;
- if (xprt->shutdown)
- goto out;
-
- /* Wait until we have enough socket memory */
- if (xprt->stream) {
- /* from net/core/stream.c:sk_stream_write_space */
- if (sk_stream_wspace(sk) < sk_stream_min_wspace(sk))
- goto out;
- } else {
- /* from net/core/sock.c:sock_def_write_space */
- if (!sock_writeable(sk))
- goto out;
- }
-
- if (!test_and_clear_bit(SOCK_NOSPACE, &sock->flags))
- goto out;
-
- spin_lock_bh(&xprt->sock_lock);
- if (xprt->snd_task)
- rpc_wake_up_task(xprt->snd_task);
- spin_unlock_bh(&xprt->sock_lock);
-out:
- read_unlock(&sk->sk_callback_lock);
-}
-
-/*
- * RPC receive timeout handler.
- */
-static void
-xprt_timer(struct rpc_task *task)
-{
- struct rpc_rqst *req = task->tk_rqstp;
+ struct rpc_rqst *req = task->tk_rqstp;
struct rpc_xprt *xprt = req->rq_xprt;
- spin_lock(&xprt->sock_lock);
- if (req->rq_received)
- goto out;
+ dprintk("RPC: %4d xprt_timer\n", task->tk_pid);
- xprt_adjust_cwnd(req->rq_xprt, -ETIMEDOUT);
- __xprt_put_cong(xprt, req);
-
- dprintk("RPC: %4d xprt_timer (%s request)\n",
- task->tk_pid, req ? "pending" : "backlogged");
-
- task->tk_status = -ETIMEDOUT;
-out:
+ spin_lock(&xprt->transport_lock);
+ if (!req->rq_received) {
+ if (xprt->ops->timer)
+ xprt->ops->timer(task);
+ task->tk_status = -ETIMEDOUT;
+ }
task->tk_timeout = 0;
rpc_wake_up_task(task);
- spin_unlock(&xprt->sock_lock);
+ spin_unlock(&xprt->transport_lock);
}
-/*
- * Place the actual RPC call.
- * We have to copy the iovec because sendmsg fiddles with its contents.
+/**
+ * xprt_prepare_transmit - reserve the transport before sending a request
+ * @task: RPC task about to send a request
+ *
*/
-int
-xprt_prepare_transmit(struct rpc_task *task)
+int xprt_prepare_transmit(struct rpc_task *task)
{
struct rpc_rqst *req = task->tk_rqstp;
struct rpc_xprt *xprt = req->rq_xprt;
@@ -1191,12 +690,12 @@
if (xprt->shutdown)
return -EIO;
- spin_lock_bh(&xprt->sock_lock);
+ spin_lock_bh(&xprt->transport_lock);
if (req->rq_received && !req->rq_bytes_sent) {
err = req->rq_received;
goto out_unlock;
}
- if (!__xprt_lock_write(xprt, task)) {
+ if (!xprt->ops->reserve_xprt(task)) {
err = -EAGAIN;
goto out_unlock;
}
@@ -1206,39 +705,42 @@
goto out_unlock;
}
out_unlock:
- spin_unlock_bh(&xprt->sock_lock);
+ spin_unlock_bh(&xprt->transport_lock);
return err;
}
void
-xprt_transmit(struct rpc_task *task)
+xprt_abort_transmit(struct rpc_task *task)
{
- struct rpc_clnt *clnt = task->tk_client;
+ struct rpc_xprt *xprt = task->tk_xprt;
+
+ xprt_release_write(xprt, task);
+}
+
+/**
+ * xprt_transmit - send an RPC request on a transport
+ * @task: controlling RPC task
+ *
+ * We have to copy the iovec because sendmsg fiddles with its contents.
+ */
+void xprt_transmit(struct rpc_task *task)
+{
struct rpc_rqst *req = task->tk_rqstp;
struct rpc_xprt *xprt = req->rq_xprt;
- int status, retry = 0;
-
+ int status;
dprintk("RPC: %4d xprt_transmit(%u)\n", task->tk_pid, req->rq_slen);
- /* set up everything as needed. */
- /* Write the record marker */
- if (xprt->stream) {
- u32 *marker = req->rq_svec[0].iov_base;
-
- *marker = htonl(0x80000000|(req->rq_slen-sizeof(*marker)));
- }
-
smp_rmb();
if (!req->rq_received) {
if (list_empty(&req->rq_list)) {
- spin_lock_bh(&xprt->sock_lock);
+ spin_lock_bh(&xprt->transport_lock);
/* Update the softirq receive buffer */
memcpy(&req->rq_private_buf, &req->rq_rcv_buf,
sizeof(req->rq_private_buf));
/* Add request to the receive list */
list_add_tail(&req->rq_list, &xprt->recv);
- spin_unlock_bh(&xprt->sock_lock);
+ spin_unlock_bh(&xprt->transport_lock);
xprt_reset_majortimeo(req);
/* Turn off autodisconnect */
del_singleshot_timer_sync(&xprt->timer);
@@ -1246,40 +748,19 @@
} else if (!req->rq_bytes_sent)
return;
- /* Continue transmitting the packet/record. We must be careful
- * to cope with writespace callbacks arriving _after_ we have
- * called xprt_sendmsg().
- */
- while (1) {
- req->rq_xtime = jiffies;
- status = xprt_sendmsg(xprt, req);
-
- if (status < 0)
- break;
-
- if (xprt->stream) {
- req->rq_bytes_sent += status;
-
- /* If we've sent the entire packet, immediately
- * reset the count of bytes sent. */
- if (req->rq_bytes_sent >= req->rq_slen) {
- req->rq_bytes_sent = 0;
- goto out_receive;
- }
- } else {
- if (status >= req->rq_slen)
- goto out_receive;
- status = -EAGAIN;
- break;
- }
-
- dprintk("RPC: %4d xmit incomplete (%d left of %d)\n",
- task->tk_pid, req->rq_slen - req->rq_bytes_sent,
- req->rq_slen);
-
- status = -EAGAIN;
- if (retry++ > 50)
- break;
+ status = xprt->ops->send_request(task);
+ if (status == 0) {
+ dprintk("RPC: %4d xmit complete\n", task->tk_pid);
+ spin_lock_bh(&xprt->transport_lock);
+ xprt->ops->set_retrans_timeout(task);
+ /* Don't race with disconnect */
+ if (!xprt_connected(xprt))
+ task->tk_status = -ENOTCONN;
+ else if (!req->rq_received)
+ rpc_sleep_on(&xprt->pending, task, NULL, xprt_timer);
+ xprt->ops->release_xprt(xprt, task);
+ spin_unlock_bh(&xprt->transport_lock);
+ return;
}
/* Note: at this point, task->tk_sleeping has not yet been set,
@@ -1289,60 +770,19 @@
task->tk_status = status;
switch (status) {
- case -EAGAIN:
- if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) {
- /* Protect against races with xprt_write_space */
- spin_lock_bh(&xprt->sock_lock);
- /* Don't race with disconnect */
- if (!xprt_connected(xprt))
- task->tk_status = -ENOTCONN;
- else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags)) {
- task->tk_timeout = req->rq_timeout;
- rpc_sleep_on(&xprt->pending, task, NULL, NULL);
- }
- spin_unlock_bh(&xprt->sock_lock);
- return;
- }
- /* Keep holding the socket if it is blocked */
- rpc_delay(task, HZ>>4);
- return;
case -ECONNREFUSED:
- task->tk_timeout = RPC_REESTABLISH_TIMEOUT;
rpc_sleep_on(&xprt->sending, task, NULL, NULL);
+ case -EAGAIN:
case -ENOTCONN:
return;
default:
- if (xprt->stream)
- xprt_disconnect(xprt);
+ break;
}
xprt_release_write(xprt, task);
return;
- out_receive:
- dprintk("RPC: %4d xmit complete\n", task->tk_pid);
- /* Set the task's receive timeout value */
- spin_lock_bh(&xprt->sock_lock);
- if (!xprt->nocong) {
- int timer = task->tk_msg.rpc_proc->p_timer;
- task->tk_timeout = rpc_calc_rto(clnt->cl_rtt, timer);
- task->tk_timeout <<= rpc_ntimeo(clnt->cl_rtt, timer) + req->rq_retries;
- if (task->tk_timeout > xprt->timeout.to_maxval || task->tk_timeout == 0)
- task->tk_timeout = xprt->timeout.to_maxval;
- } else
- task->tk_timeout = req->rq_timeout;
- /* Don't race with disconnect */
- if (!xprt_connected(xprt))
- task->tk_status = -ENOTCONN;
- else if (!req->rq_received)
- rpc_sleep_on(&xprt->pending, task, NULL, xprt_timer);
- __xprt_release_write(xprt, task);
- spin_unlock_bh(&xprt->sock_lock);
}
-/*
- * Reserve an RPC call slot.
- */
-static inline void
-do_xprt_reserve(struct rpc_task *task)
+static inline void do_xprt_reserve(struct rpc_task *task)
{
struct rpc_xprt *xprt = task->tk_xprt;
@@ -1362,22 +802,25 @@
rpc_sleep_on(&xprt->backlog, task, NULL, NULL);
}
-void
-xprt_reserve(struct rpc_task *task)
+/**
+ * xprt_reserve - allocate an RPC request slot
+ * @task: RPC task requesting a slot allocation
+ *
+ * If no more slots are available, place the task on the transport's
+ * backlog queue.
+ */
+void xprt_reserve(struct rpc_task *task)
{
struct rpc_xprt *xprt = task->tk_xprt;
task->tk_status = -EIO;
if (!xprt->shutdown) {
- spin_lock(&xprt->xprt_lock);
+ spin_lock(&xprt->reserve_lock);
do_xprt_reserve(task);
- spin_unlock(&xprt->xprt_lock);
+ spin_unlock(&xprt->reserve_lock);
}
}
-/*
- * Allocate a 'unique' XID
- */
static inline u32 xprt_alloc_xid(struct rpc_xprt *xprt)
{
return xprt->xid++;
@@ -1388,11 +831,7 @@
get_random_bytes(&xprt->xid, sizeof(xprt->xid));
}
-/*
- * Initialize RPC request
- */
-static void
-xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt)
+static void xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt)
{
struct rpc_rqst *req = task->tk_rqstp;
@@ -1400,128 +839,104 @@
req->rq_task = task;
req->rq_xprt = xprt;
req->rq_xid = xprt_alloc_xid(xprt);
+ req->rq_release_snd_buf = NULL;
dprintk("RPC: %4d reserved req %p xid %08x\n", task->tk_pid,
req, ntohl(req->rq_xid));
}
-/*
- * Release an RPC call slot
+/**
+ * xprt_release - release an RPC request slot
+ * @task: task which is finished with the slot
+ *
*/
-void
-xprt_release(struct rpc_task *task)
+void xprt_release(struct rpc_task *task)
{
struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_rqst *req;
if (!(req = task->tk_rqstp))
return;
- spin_lock_bh(&xprt->sock_lock);
- __xprt_release_write(xprt, task);
- __xprt_put_cong(xprt, req);
+ spin_lock_bh(&xprt->transport_lock);
+ xprt->ops->release_xprt(xprt, task);
+ if (xprt->ops->release_request)
+ xprt->ops->release_request(task);
if (!list_empty(&req->rq_list))
list_del(&req->rq_list);
xprt->last_used = jiffies;
if (list_empty(&xprt->recv) && !xprt->shutdown)
- mod_timer(&xprt->timer, xprt->last_used + XPRT_IDLE_TIMEOUT);
- spin_unlock_bh(&xprt->sock_lock);
+ mod_timer(&xprt->timer,
+ xprt->last_used + xprt->idle_timeout);
+ spin_unlock_bh(&xprt->transport_lock);
task->tk_rqstp = NULL;
+ if (req->rq_release_snd_buf)
+ req->rq_release_snd_buf(req);
memset(req, 0, sizeof(*req)); /* mark unused */
dprintk("RPC: %4d release request %p\n", task->tk_pid, req);
- spin_lock(&xprt->xprt_lock);
+ spin_lock(&xprt->reserve_lock);
list_add(&req->rq_list, &xprt->free);
- xprt_clear_backlog(xprt);
- spin_unlock(&xprt->xprt_lock);
+ rpc_wake_up_next(&xprt->backlog);
+ spin_unlock(&xprt->reserve_lock);
}
-/*
- * Set default timeout parameters
+/**
+ * xprt_set_timeout - set constant RPC timeout
+ * @to: RPC timeout parameters to set up
+ * @retr: number of retries
+ * @incr: amount of increase after each retry
+ *
*/
-static void
-xprt_default_timeout(struct rpc_timeout *to, int proto)
-{
- if (proto == IPPROTO_UDP)
- xprt_set_timeout(to, 5, 5 * HZ);
- else
- xprt_set_timeout(to, 5, 60 * HZ);
-}
-
-/*
- * Set constant timeout
- */
-void
-xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr)
+void xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr)
{
to->to_initval =
to->to_increment = incr;
- to->to_maxval = incr * retr;
+ to->to_maxval = to->to_initval + (incr * retr);
to->to_retries = retr;
to->to_exponential = 0;
}
-unsigned int xprt_udp_slot_table_entries = RPC_DEF_SLOT_TABLE;
-unsigned int xprt_tcp_slot_table_entries = RPC_DEF_SLOT_TABLE;
-
-/*
- * Initialize an RPC client
- */
-static struct rpc_xprt *
-xprt_setup(int proto, struct sockaddr_in *ap, struct rpc_timeout *to)
+static struct rpc_xprt *xprt_setup(int proto, struct sockaddr_in *ap, struct rpc_timeout *to)
{
+ int result;
struct rpc_xprt *xprt;
- unsigned int entries;
- size_t slot_table_size;
struct rpc_rqst *req;
- dprintk("RPC: setting up %s transport...\n",
- proto == IPPROTO_UDP? "UDP" : "TCP");
-
- entries = (proto == IPPROTO_TCP)?
- xprt_tcp_slot_table_entries : xprt_udp_slot_table_entries;
-
if ((xprt = kmalloc(sizeof(struct rpc_xprt), GFP_KERNEL)) == NULL)
return ERR_PTR(-ENOMEM);
memset(xprt, 0, sizeof(*xprt)); /* Nnnngh! */
- xprt->max_reqs = entries;
- slot_table_size = entries * sizeof(xprt->slot[0]);
- xprt->slot = kmalloc(slot_table_size, GFP_KERNEL);
- if (xprt->slot == NULL) {
- kfree(xprt);
- return ERR_PTR(-ENOMEM);
- }
- memset(xprt->slot, 0, slot_table_size);
xprt->addr = *ap;
- xprt->prot = proto;
- xprt->stream = (proto == IPPROTO_TCP)? 1 : 0;
- if (xprt->stream) {
- xprt->cwnd = RPC_MAXCWND(xprt);
- xprt->nocong = 1;
- xprt->max_payload = (1U << 31) - 1;
- } else {
- xprt->cwnd = RPC_INITCWND;
- xprt->max_payload = (1U << 16) - (MAX_HEADER << 3);
+
+ switch (proto) {
+ case IPPROTO_UDP:
+ result = xs_setup_udp(xprt, to);
+ break;
+ case IPPROTO_TCP:
+ result = xs_setup_tcp(xprt, to);
+ break;
+ default:
+ printk(KERN_ERR "RPC: unrecognized transport protocol: %d\n",
+ proto);
+ result = -EIO;
+ break;
}
- spin_lock_init(&xprt->sock_lock);
- spin_lock_init(&xprt->xprt_lock);
- init_waitqueue_head(&xprt->cong_wait);
+ if (result) {
+ kfree(xprt);
+ return ERR_PTR(result);
+ }
+
+ spin_lock_init(&xprt->transport_lock);
+ spin_lock_init(&xprt->reserve_lock);
INIT_LIST_HEAD(&xprt->free);
INIT_LIST_HEAD(&xprt->recv);
- INIT_WORK(&xprt->sock_connect, xprt_socket_connect, xprt);
- INIT_WORK(&xprt->task_cleanup, xprt_socket_autoclose, xprt);
+ INIT_WORK(&xprt->task_cleanup, xprt_autoclose, xprt);
init_timer(&xprt->timer);
xprt->timer.function = xprt_init_autodisconnect;
xprt->timer.data = (unsigned long) xprt;
xprt->last_used = jiffies;
- xprt->port = XPRT_MAX_RESVPORT;
-
- /* Set timeout parameters */
- if (to) {
- xprt->timeout = *to;
- } else
- xprt_default_timeout(&xprt->timeout, xprt->prot);
+ xprt->cwnd = RPC_INITCWND;
rpc_init_wait_queue(&xprt->pending, "xprt_pending");
rpc_init_wait_queue(&xprt->sending, "xprt_sending");
@@ -1529,139 +944,25 @@
rpc_init_priority_wait_queue(&xprt->backlog, "xprt_backlog");
/* initialize free list */
- for (req = &xprt->slot[entries-1]; req >= &xprt->slot[0]; req--)
+ for (req = &xprt->slot[xprt->max_reqs-1]; req >= &xprt->slot[0]; req--)
list_add(&req->rq_list, &xprt->free);
xprt_init_xid(xprt);
- /* Check whether we want to use a reserved port */
- xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0;
-
dprintk("RPC: created transport %p with %u slots\n", xprt,
xprt->max_reqs);
return xprt;
}
-/*
- * Bind to a reserved port
+/**
+ * xprt_create_proto - create an RPC client transport
+ * @proto: requested transport protocol
+ * @sap: remote peer's address
+ * @to: timeout parameters for new transport
+ *
*/
-static inline int xprt_bindresvport(struct rpc_xprt *xprt, struct socket *sock)
-{
- struct sockaddr_in myaddr = {
- .sin_family = AF_INET,
- };
- int err, port;
-
- /* Were we already bound to a given port? Try to reuse it */
- port = xprt->port;
- do {
- myaddr.sin_port = htons(port);
- err = sock->ops->bind(sock, (struct sockaddr *) &myaddr,
- sizeof(myaddr));
- if (err == 0) {
- xprt->port = port;
- return 0;
- }
- if (--port == 0)
- port = XPRT_MAX_RESVPORT;
- } while (err == -EADDRINUSE && port != xprt->port);
-
- printk("RPC: Can't bind to reserved port (%d).\n", -err);
- return err;
-}
-
-static void
-xprt_bind_socket(struct rpc_xprt *xprt, struct socket *sock)
-{
- struct sock *sk = sock->sk;
-
- if (xprt->inet)
- return;
-
- write_lock_bh(&sk->sk_callback_lock);
- sk->sk_user_data = xprt;
- xprt->old_data_ready = sk->sk_data_ready;
- xprt->old_state_change = sk->sk_state_change;
- xprt->old_write_space = sk->sk_write_space;
- if (xprt->prot == IPPROTO_UDP) {
- sk->sk_data_ready = udp_data_ready;
- sk->sk_no_check = UDP_CSUM_NORCV;
- xprt_set_connected(xprt);
- } else {
- tcp_sk(sk)->nonagle = 1; /* disable Nagle's algorithm */
- sk->sk_data_ready = tcp_data_ready;
- sk->sk_state_change = tcp_state_change;
- xprt_clear_connected(xprt);
- }
- sk->sk_write_space = xprt_write_space;
-
- /* Reset to new socket */
- xprt->sock = sock;
- xprt->inet = sk;
- write_unlock_bh(&sk->sk_callback_lock);
-
- return;
-}
-
-/*
- * Set socket buffer length
- */
-void
-xprt_sock_setbufsize(struct rpc_xprt *xprt)
-{
- struct sock *sk = xprt->inet;
-
- if (xprt->stream)
- return;
- if (xprt->rcvsize) {
- sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
- sk->sk_rcvbuf = xprt->rcvsize * xprt->max_reqs * 2;
- }
- if (xprt->sndsize) {
- sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
- sk->sk_sndbuf = xprt->sndsize * xprt->max_reqs * 2;
- sk->sk_write_space(sk);
- }
-}
-
-/*
- * Datastream sockets are created here, but xprt_connect will create
- * and connect stream sockets.
- */
-static struct socket * xprt_create_socket(struct rpc_xprt *xprt, int proto, int resvport)
-{
- struct socket *sock;
- int type, err;
-
- dprintk("RPC: xprt_create_socket(%s %d)\n",
- (proto == IPPROTO_UDP)? "udp" : "tcp", proto);
-
- type = (proto == IPPROTO_UDP)? SOCK_DGRAM : SOCK_STREAM;
-
- if ((err = sock_create_kern(PF_INET, type, proto, &sock)) < 0) {
- printk("RPC: can't create socket (%d).\n", -err);
- return NULL;
- }
-
- /* If the caller has the capability, bind to a reserved port */
- if (resvport && xprt_bindresvport(xprt, sock) < 0) {
- printk("RPC: can't bind to reserved port.\n");
- goto failed;
- }
-
- return sock;
-
-failed:
- sock_release(sock);
- return NULL;
-}
-
-/*
- * Create an RPC client transport given the protocol and peer address.
- */
-struct rpc_xprt *
-xprt_create_proto(int proto, struct sockaddr_in *sap, struct rpc_timeout *to)
+struct rpc_xprt *xprt_create_proto(int proto, struct sockaddr_in *sap, struct rpc_timeout *to)
{
struct rpc_xprt *xprt;
@@ -1673,46 +974,26 @@
return xprt;
}
-/*
- * Prepare for transport shutdown.
- */
-static void
-xprt_shutdown(struct rpc_xprt *xprt)
+static void xprt_shutdown(struct rpc_xprt *xprt)
{
xprt->shutdown = 1;
rpc_wake_up(&xprt->sending);
rpc_wake_up(&xprt->resend);
- rpc_wake_up(&xprt->pending);
+ xprt_wake_pending_tasks(xprt, -EIO);
rpc_wake_up(&xprt->backlog);
- wake_up(&xprt->cong_wait);
del_timer_sync(&xprt->timer);
-
- /* synchronously wait for connect worker to finish */
- cancel_delayed_work(&xprt->sock_connect);
- flush_scheduled_work();
}
-/*
- * Clear the xprt backlog queue
+/**
+ * xprt_destroy - destroy an RPC transport, killing off all requests.
+ * @xprt: transport to destroy
+ *
*/
-static int
-xprt_clear_backlog(struct rpc_xprt *xprt) {
- rpc_wake_up_next(&xprt->backlog);
- wake_up(&xprt->cong_wait);
- return 1;
-}
-
-/*
- * Destroy an RPC transport, killing off all requests.
- */
-int
-xprt_destroy(struct rpc_xprt *xprt)
+int xprt_destroy(struct rpc_xprt *xprt)
{
dprintk("RPC: destroying transport %p\n", xprt);
xprt_shutdown(xprt);
- xprt_disconnect(xprt);
- xprt_close(xprt);
- kfree(xprt->slot);
+ xprt->ops->destroy(xprt);
kfree(xprt);
return 0;
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
new file mode 100644
index 0000000..2e15292
--- /dev/null
+++ b/net/sunrpc/xprtsock.c
@@ -0,0 +1,1252 @@
+/*
+ * linux/net/sunrpc/xprtsock.c
+ *
+ * Client-side transport implementation for sockets.
+ *
+ * TCP callback races fixes (C) 1998 Red Hat Software <alan@redhat.com>
+ * TCP send fixes (C) 1998 Red Hat Software <alan@redhat.com>
+ * TCP NFS related read + write fixes
+ * (C) 1999 Dave Airlie, University of Limerick, Ireland <airlied@linux.ie>
+ *
+ * Rewrite of larges part of the code in order to stabilize TCP stuff.
+ * Fix behaviour when socket buffer is full.
+ * (C) 1999 Trond Myklebust <trond.myklebust@fys.uio.no>
+ *
+ * IP socket transport implementation, (C) 2005 Chuck Lever <cel@netapp.com>
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/errno.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/net.h>
+#include <linux/mm.h>
+#include <linux/udp.h>
+#include <linux/tcp.h>
+#include <linux/sunrpc/clnt.h>
+#include <linux/file.h>
+
+#include <net/sock.h>
+#include <net/checksum.h>
+#include <net/udp.h>
+#include <net/tcp.h>
+
+/*
+ * How many times to try sending a request on a socket before waiting
+ * for the socket buffer to clear.
+ */
+#define XS_SENDMSG_RETRY (10U)
+
+/*
+ * Time out for an RPC UDP socket connect. UDP socket connects are
+ * synchronous, but we set a timeout anyway in case of resource
+ * exhaustion on the local host.
+ */
+#define XS_UDP_CONN_TO (5U * HZ)
+
+/*
+ * Wait duration for an RPC TCP connection to be established. Solaris
+ * NFS over TCP uses 60 seconds, for example, which is in line with how
+ * long a server takes to reboot.
+ */
+#define XS_TCP_CONN_TO (60U * HZ)
+
+/*
+ * Wait duration for a reply from the RPC portmapper.
+ */
+#define XS_BIND_TO (60U * HZ)
+
+/*
+ * Delay if a UDP socket connect error occurs. This is most likely some
+ * kind of resource problem on the local host.
+ */
+#define XS_UDP_REEST_TO (2U * HZ)
+
+/*
+ * The reestablish timeout allows clients to delay for a bit before attempting
+ * to reconnect to a server that just dropped our connection.
+ *
+ * We implement an exponential backoff when trying to reestablish a TCP
+ * transport connection with the server. Some servers like to drop a TCP
+ * connection when they are overworked, so we start with a short timeout and
+ * increase over time if the server is down or not responding.
+ */
+#define XS_TCP_INIT_REEST_TO (3U * HZ)
+#define XS_TCP_MAX_REEST_TO (5U * 60 * HZ)
+
+/*
+ * TCP idle timeout; client drops the transport socket if it is idle
+ * for this long. Note that we also timeout UDP sockets to prevent
+ * holding port numbers when there is no RPC traffic.
+ */
+#define XS_IDLE_DISC_TO (5U * 60 * HZ)
+
+#ifdef RPC_DEBUG
+# undef RPC_DEBUG_DATA
+# define RPCDBG_FACILITY RPCDBG_TRANS
+#endif
+
+#ifdef RPC_DEBUG_DATA
+static void xs_pktdump(char *msg, u32 *packet, unsigned int count)
+{
+ u8 *buf = (u8 *) packet;
+ int j;
+
+ dprintk("RPC: %s\n", msg);
+ for (j = 0; j < count && j < 128; j += 4) {
+ if (!(j & 31)) {
+ if (j)
+ dprintk("\n");
+ dprintk("0x%04x ", j);
+ }
+ dprintk("%02x%02x%02x%02x ",
+ buf[j], buf[j+1], buf[j+2], buf[j+3]);
+ }
+ dprintk("\n");
+}
+#else
+static inline void xs_pktdump(char *msg, u32 *packet, unsigned int count)
+{
+ /* NOP */
+}
+#endif
+
+#define XS_SENDMSG_FLAGS (MSG_DONTWAIT | MSG_NOSIGNAL)
+
+static inline int xs_send_head(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base, unsigned int len)
+{
+ struct kvec iov = {
+ .iov_base = xdr->head[0].iov_base + base,
+ .iov_len = len - base,
+ };
+ struct msghdr msg = {
+ .msg_name = addr,
+ .msg_namelen = addrlen,
+ .msg_flags = XS_SENDMSG_FLAGS,
+ };
+
+ if (xdr->len > len)
+ msg.msg_flags |= MSG_MORE;
+
+ if (likely(iov.iov_len))
+ return kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len);
+ return kernel_sendmsg(sock, &msg, NULL, 0, 0);
+}
+
+static int xs_send_tail(struct socket *sock, struct xdr_buf *xdr, unsigned int base, unsigned int len)
+{
+ struct kvec iov = {
+ .iov_base = xdr->tail[0].iov_base + base,
+ .iov_len = len - base,
+ };
+ struct msghdr msg = {
+ .msg_flags = XS_SENDMSG_FLAGS,
+ };
+
+ return kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len);
+}
+
+/**
+ * xs_sendpages - write pages directly to a socket
+ * @sock: socket to send on
+ * @addr: UDP only -- address of destination
+ * @addrlen: UDP only -- length of destination address
+ * @xdr: buffer containing this request
+ * @base: starting position in the buffer
+ *
+ */
+static inline int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base)
+{
+ struct page **ppage = xdr->pages;
+ unsigned int len, pglen = xdr->page_len;
+ int err, ret = 0;
+ ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int);
+
+ if (unlikely(!sock))
+ return -ENOTCONN;
+
+ clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
+
+ len = xdr->head[0].iov_len;
+ if (base < len || (addr != NULL && base == 0)) {
+ err = xs_send_head(sock, addr, addrlen, xdr, base, len);
+ if (ret == 0)
+ ret = err;
+ else if (err > 0)
+ ret += err;
+ if (err != (len - base))
+ goto out;
+ base = 0;
+ } else
+ base -= len;
+
+ if (unlikely(pglen == 0))
+ goto copy_tail;
+ if (unlikely(base >= pglen)) {
+ base -= pglen;
+ goto copy_tail;
+ }
+ if (base || xdr->page_base) {
+ pglen -= base;
+ base += xdr->page_base;
+ ppage += base >> PAGE_CACHE_SHIFT;
+ base &= ~PAGE_CACHE_MASK;
+ }
+
+ sendpage = sock->ops->sendpage ? : sock_no_sendpage;
+ do {
+ int flags = XS_SENDMSG_FLAGS;
+
+ len = PAGE_CACHE_SIZE;
+ if (base)
+ len -= base;
+ if (pglen < len)
+ len = pglen;
+
+ if (pglen != len || xdr->tail[0].iov_len != 0)
+ flags |= MSG_MORE;
+
+ /* Hmm... We might be dealing with highmem pages */
+ if (PageHighMem(*ppage))
+ sendpage = sock_no_sendpage;
+ err = sendpage(sock, *ppage, base, len, flags);
+ if (ret == 0)
+ ret = err;
+ else if (err > 0)
+ ret += err;
+ if (err != len)
+ goto out;
+ base = 0;
+ ppage++;
+ } while ((pglen -= len) != 0);
+copy_tail:
+ len = xdr->tail[0].iov_len;
+ if (base < len) {
+ err = xs_send_tail(sock, xdr, base, len);
+ if (ret == 0)
+ ret = err;
+ else if (err > 0)
+ ret += err;
+ }
+out:
+ return ret;
+}
+
+/**
+ * xs_nospace - place task on wait queue if transmit was incomplete
+ * @task: task to put to sleep
+ *
+ */
+static void xs_nospace(struct rpc_task *task)
+{
+ struct rpc_rqst *req = task->tk_rqstp;
+ struct rpc_xprt *xprt = req->rq_xprt;
+
+ dprintk("RPC: %4d xmit incomplete (%u left of %u)\n",
+ task->tk_pid, req->rq_slen - req->rq_bytes_sent,
+ req->rq_slen);
+
+ if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) {
+ /* Protect against races with write_space */
+ spin_lock_bh(&xprt->transport_lock);
+
+ /* Don't race with disconnect */
+ if (!xprt_connected(xprt))
+ task->tk_status = -ENOTCONN;
+ else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags))
+ xprt_wait_for_buffer_space(task);
+
+ spin_unlock_bh(&xprt->transport_lock);
+ } else
+ /* Keep holding the socket if it is blocked */
+ rpc_delay(task, HZ>>4);
+}
+
+/**
+ * xs_udp_send_request - write an RPC request to a UDP socket
+ * @task: address of RPC task that manages the state of an RPC request
+ *
+ * Return values:
+ * 0: The request has been sent
+ * EAGAIN: The socket was blocked, please call again later to
+ * complete the request
+ * ENOTCONN: Caller needs to invoke connect logic then call again
+ * other: Some other error occured, the request was not sent
+ */
+static int xs_udp_send_request(struct rpc_task *task)
+{
+ struct rpc_rqst *req = task->tk_rqstp;
+ struct rpc_xprt *xprt = req->rq_xprt;
+ struct xdr_buf *xdr = &req->rq_snd_buf;
+ int status;
+
+ xs_pktdump("packet data:",
+ req->rq_svec->iov_base,
+ req->rq_svec->iov_len);
+
+ req->rq_xtime = jiffies;
+ status = xs_sendpages(xprt->sock, (struct sockaddr *) &xprt->addr,
+ sizeof(xprt->addr), xdr, req->rq_bytes_sent);
+
+ dprintk("RPC: xs_udp_send_request(%u) = %d\n",
+ xdr->len - req->rq_bytes_sent, status);
+
+ if (likely(status >= (int) req->rq_slen))
+ return 0;
+
+ /* Still some bytes left; set up for a retry later. */
+ if (status > 0)
+ status = -EAGAIN;
+
+ switch (status) {
+ case -ENETUNREACH:
+ case -EPIPE:
+ case -ECONNREFUSED:
+ /* When the server has died, an ICMP port unreachable message
+ * prompts ECONNREFUSED. */
+ break;
+ case -EAGAIN:
+ xs_nospace(task);
+ break;
+ default:
+ dprintk("RPC: sendmsg returned unrecognized error %d\n",
+ -status);
+ break;
+ }
+
+ return status;
+}
+
+static inline void xs_encode_tcp_record_marker(struct xdr_buf *buf)
+{
+ u32 reclen = buf->len - sizeof(rpc_fraghdr);
+ rpc_fraghdr *base = buf->head[0].iov_base;
+ *base = htonl(RPC_LAST_STREAM_FRAGMENT | reclen);
+}
+
+/**
+ * xs_tcp_send_request - write an RPC request to a TCP socket
+ * @task: address of RPC task that manages the state of an RPC request
+ *
+ * Return values:
+ * 0: The request has been sent
+ * EAGAIN: The socket was blocked, please call again later to
+ * complete the request
+ * ENOTCONN: Caller needs to invoke connect logic then call again
+ * other: Some other error occured, the request was not sent
+ *
+ * XXX: In the case of soft timeouts, should we eventually give up
+ * if sendmsg is not able to make progress?
+ */
+static int xs_tcp_send_request(struct rpc_task *task)
+{
+ struct rpc_rqst *req = task->tk_rqstp;
+ struct rpc_xprt *xprt = req->rq_xprt;
+ struct xdr_buf *xdr = &req->rq_snd_buf;
+ int status, retry = 0;
+
+ xs_encode_tcp_record_marker(&req->rq_snd_buf);
+
+ xs_pktdump("packet data:",
+ req->rq_svec->iov_base,
+ req->rq_svec->iov_len);
+
+ /* Continue transmitting the packet/record. We must be careful
+ * to cope with writespace callbacks arriving _after_ we have
+ * called sendmsg(). */
+ while (1) {
+ req->rq_xtime = jiffies;
+ status = xs_sendpages(xprt->sock, NULL, 0, xdr,
+ req->rq_bytes_sent);
+
+ dprintk("RPC: xs_tcp_send_request(%u) = %d\n",
+ xdr->len - req->rq_bytes_sent, status);
+
+ if (unlikely(status < 0))
+ break;
+
+ /* If we've sent the entire packet, immediately
+ * reset the count of bytes sent. */
+ req->rq_bytes_sent += status;
+ if (likely(req->rq_bytes_sent >= req->rq_slen)) {
+ req->rq_bytes_sent = 0;
+ return 0;
+ }
+
+ status = -EAGAIN;
+ if (retry++ > XS_SENDMSG_RETRY)
+ break;
+ }
+
+ switch (status) {
+ case -EAGAIN:
+ xs_nospace(task);
+ break;
+ case -ECONNREFUSED:
+ case -ECONNRESET:
+ case -ENOTCONN:
+ case -EPIPE:
+ status = -ENOTCONN;
+ break;
+ default:
+ dprintk("RPC: sendmsg returned unrecognized error %d\n",
+ -status);
+ xprt_disconnect(xprt);
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * xs_close - close a socket
+ * @xprt: transport
+ *
+ * This is used when all requests are complete; ie, no DRC state remains
+ * on the server we want to save.
+ */
+static void xs_close(struct rpc_xprt *xprt)
+{
+ struct socket *sock = xprt->sock;
+ struct sock *sk = xprt->inet;
+
+ if (!sk)
+ return;
+
+ dprintk("RPC: xs_close xprt %p\n", xprt);
+
+ write_lock_bh(&sk->sk_callback_lock);
+ xprt->inet = NULL;
+ xprt->sock = NULL;
+
+ sk->sk_user_data = NULL;
+ sk->sk_data_ready = xprt->old_data_ready;
+ sk->sk_state_change = xprt->old_state_change;
+ sk->sk_write_space = xprt->old_write_space;
+ write_unlock_bh(&sk->sk_callback_lock);
+
+ sk->sk_no_check = 0;
+
+ sock_release(sock);
+}
+
+/**
+ * xs_destroy - prepare to shutdown a transport
+ * @xprt: doomed transport
+ *
+ */
+static void xs_destroy(struct rpc_xprt *xprt)
+{
+ dprintk("RPC: xs_destroy xprt %p\n", xprt);
+
+ cancel_delayed_work(&xprt->connect_worker);
+ flush_scheduled_work();
+
+ xprt_disconnect(xprt);
+ xs_close(xprt);
+ kfree(xprt->slot);
+}
+
+static inline struct rpc_xprt *xprt_from_sock(struct sock *sk)
+{
+ return (struct rpc_xprt *) sk->sk_user_data;
+}
+
+/**
+ * xs_udp_data_ready - "data ready" callback for UDP sockets
+ * @sk: socket with data to read
+ * @len: how much data to read
+ *
+ */
+static void xs_udp_data_ready(struct sock *sk, int len)
+{
+ struct rpc_task *task;
+ struct rpc_xprt *xprt;
+ struct rpc_rqst *rovr;
+ struct sk_buff *skb;
+ int err, repsize, copied;
+ u32 _xid, *xp;
+
+ read_lock(&sk->sk_callback_lock);
+ dprintk("RPC: xs_udp_data_ready...\n");
+ if (!(xprt = xprt_from_sock(sk)))
+ goto out;
+
+ if ((skb = skb_recv_datagram(sk, 0, 1, &err)) == NULL)
+ goto out;
+
+ if (xprt->shutdown)
+ goto dropit;
+
+ repsize = skb->len - sizeof(struct udphdr);
+ if (repsize < 4) {
+ dprintk("RPC: impossible RPC reply size %d!\n", repsize);
+ goto dropit;
+ }
+
+ /* Copy the XID from the skb... */
+ xp = skb_header_pointer(skb, sizeof(struct udphdr),
+ sizeof(_xid), &_xid);
+ if (xp == NULL)
+ goto dropit;
+
+ /* Look up and lock the request corresponding to the given XID */
+ spin_lock(&xprt->transport_lock);
+ rovr = xprt_lookup_rqst(xprt, *xp);
+ if (!rovr)
+ goto out_unlock;
+ task = rovr->rq_task;
+
+ if ((copied = rovr->rq_private_buf.buflen) > repsize)
+ copied = repsize;
+
+ /* Suck it into the iovec, verify checksum if not done by hw. */
+ if (csum_partial_copy_to_xdr(&rovr->rq_private_buf, skb))
+ goto out_unlock;
+
+ /* Something worked... */
+ dst_confirm(skb->dst);
+
+ xprt_adjust_cwnd(task, copied);
+ xprt_update_rtt(task);
+ xprt_complete_rqst(task, copied);
+
+ out_unlock:
+ spin_unlock(&xprt->transport_lock);
+ dropit:
+ skb_free_datagram(sk, skb);
+ out:
+ read_unlock(&sk->sk_callback_lock);
+}
+
+static inline size_t xs_tcp_copy_data(skb_reader_t *desc, void *p, size_t len)
+{
+ if (len > desc->count)
+ len = desc->count;
+ if (skb_copy_bits(desc->skb, desc->offset, p, len)) {
+ dprintk("RPC: failed to copy %zu bytes from skb. %zu bytes remain\n",
+ len, desc->count);
+ return 0;
+ }
+ desc->offset += len;
+ desc->count -= len;
+ dprintk("RPC: copied %zu bytes from skb. %zu bytes remain\n",
+ len, desc->count);
+ return len;
+}
+
+static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc)
+{
+ size_t len, used;
+ char *p;
+
+ p = ((char *) &xprt->tcp_recm) + xprt->tcp_offset;
+ len = sizeof(xprt->tcp_recm) - xprt->tcp_offset;
+ used = xs_tcp_copy_data(desc, p, len);
+ xprt->tcp_offset += used;
+ if (used != len)
+ return;
+
+ xprt->tcp_reclen = ntohl(xprt->tcp_recm);
+ if (xprt->tcp_reclen & RPC_LAST_STREAM_FRAGMENT)
+ xprt->tcp_flags |= XPRT_LAST_FRAG;
+ else
+ xprt->tcp_flags &= ~XPRT_LAST_FRAG;
+ xprt->tcp_reclen &= RPC_FRAGMENT_SIZE_MASK;
+
+ xprt->tcp_flags &= ~XPRT_COPY_RECM;
+ xprt->tcp_offset = 0;
+
+ /* Sanity check of the record length */
+ if (unlikely(xprt->tcp_reclen < 4)) {
+ dprintk("RPC: invalid TCP record fragment length\n");
+ xprt_disconnect(xprt);
+ return;
+ }
+ dprintk("RPC: reading TCP record fragment of length %d\n",
+ xprt->tcp_reclen);
+}
+
+static void xs_tcp_check_recm(struct rpc_xprt *xprt)
+{
+ dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u, tcp_flags = %lx\n",
+ xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen, xprt->tcp_flags);
+ if (xprt->tcp_offset == xprt->tcp_reclen) {
+ xprt->tcp_flags |= XPRT_COPY_RECM;
+ xprt->tcp_offset = 0;
+ if (xprt->tcp_flags & XPRT_LAST_FRAG) {
+ xprt->tcp_flags &= ~XPRT_COPY_DATA;
+ xprt->tcp_flags |= XPRT_COPY_XID;
+ xprt->tcp_copied = 0;
+ }
+ }
+}
+
+static inline void xs_tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc)
+{
+ size_t len, used;
+ char *p;
+
+ len = sizeof(xprt->tcp_xid) - xprt->tcp_offset;
+ dprintk("RPC: reading XID (%Zu bytes)\n", len);
+ p = ((char *) &xprt->tcp_xid) + xprt->tcp_offset;
+ used = xs_tcp_copy_data(desc, p, len);
+ xprt->tcp_offset += used;
+ if (used != len)
+ return;
+ xprt->tcp_flags &= ~XPRT_COPY_XID;
+ xprt->tcp_flags |= XPRT_COPY_DATA;
+ xprt->tcp_copied = 4;
+ dprintk("RPC: reading reply for XID %08x\n",
+ ntohl(xprt->tcp_xid));
+ xs_tcp_check_recm(xprt);
+}
+
+static inline void xs_tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc)
+{
+ struct rpc_rqst *req;
+ struct xdr_buf *rcvbuf;
+ size_t len;
+ ssize_t r;
+
+ /* Find and lock the request corresponding to this xid */
+ spin_lock(&xprt->transport_lock);
+ req = xprt_lookup_rqst(xprt, xprt->tcp_xid);
+ if (!req) {
+ xprt->tcp_flags &= ~XPRT_COPY_DATA;
+ dprintk("RPC: XID %08x request not found!\n",
+ ntohl(xprt->tcp_xid));
+ spin_unlock(&xprt->transport_lock);
+ return;
+ }
+
+ rcvbuf = &req->rq_private_buf;
+ len = desc->count;
+ if (len > xprt->tcp_reclen - xprt->tcp_offset) {
+ skb_reader_t my_desc;
+
+ len = xprt->tcp_reclen - xprt->tcp_offset;
+ memcpy(&my_desc, desc, sizeof(my_desc));
+ my_desc.count = len;
+ r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied,
+ &my_desc, xs_tcp_copy_data);
+ desc->count -= r;
+ desc->offset += r;
+ } else
+ r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied,
+ desc, xs_tcp_copy_data);
+
+ if (r > 0) {
+ xprt->tcp_copied += r;
+ xprt->tcp_offset += r;
+ }
+ if (r != len) {
+ /* Error when copying to the receive buffer,
+ * usually because we weren't able to allocate
+ * additional buffer pages. All we can do now
+ * is turn off XPRT_COPY_DATA, so the request
+ * will not receive any additional updates,
+ * and time out.
+ * Any remaining data from this record will
+ * be discarded.
+ */
+ xprt->tcp_flags &= ~XPRT_COPY_DATA;
+ dprintk("RPC: XID %08x truncated request\n",
+ ntohl(xprt->tcp_xid));
+ dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n",
+ xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen);
+ goto out;
+ }
+
+ dprintk("RPC: XID %08x read %Zd bytes\n",
+ ntohl(xprt->tcp_xid), r);
+ dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n",
+ xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen);
+
+ if (xprt->tcp_copied == req->rq_private_buf.buflen)
+ xprt->tcp_flags &= ~XPRT_COPY_DATA;
+ else if (xprt->tcp_offset == xprt->tcp_reclen) {
+ if (xprt->tcp_flags & XPRT_LAST_FRAG)
+ xprt->tcp_flags &= ~XPRT_COPY_DATA;
+ }
+
+out:
+ if (!(xprt->tcp_flags & XPRT_COPY_DATA))
+ xprt_complete_rqst(req->rq_task, xprt->tcp_copied);
+ spin_unlock(&xprt->transport_lock);
+ xs_tcp_check_recm(xprt);
+}
+
+static inline void xs_tcp_read_discard(struct rpc_xprt *xprt, skb_reader_t *desc)
+{
+ size_t len;
+
+ len = xprt->tcp_reclen - xprt->tcp_offset;
+ if (len > desc->count)
+ len = desc->count;
+ desc->count -= len;
+ desc->offset += len;
+ xprt->tcp_offset += len;
+ dprintk("RPC: discarded %Zu bytes\n", len);
+ xs_tcp_check_recm(xprt);
+}
+
+static int xs_tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, unsigned int offset, size_t len)
+{
+ struct rpc_xprt *xprt = rd_desc->arg.data;
+ skb_reader_t desc = {
+ .skb = skb,
+ .offset = offset,
+ .count = len,
+ .csum = 0
+ };
+
+ dprintk("RPC: xs_tcp_data_recv started\n");
+ do {
+ /* Read in a new fragment marker if necessary */
+ /* Can we ever really expect to get completely empty fragments? */
+ if (xprt->tcp_flags & XPRT_COPY_RECM) {
+ xs_tcp_read_fraghdr(xprt, &desc);
+ continue;
+ }
+ /* Read in the xid if necessary */
+ if (xprt->tcp_flags & XPRT_COPY_XID) {
+ xs_tcp_read_xid(xprt, &desc);
+ continue;
+ }
+ /* Read in the request data */
+ if (xprt->tcp_flags & XPRT_COPY_DATA) {
+ xs_tcp_read_request(xprt, &desc);
+ continue;
+ }
+ /* Skip over any trailing bytes on short reads */
+ xs_tcp_read_discard(xprt, &desc);
+ } while (desc.count);
+ dprintk("RPC: xs_tcp_data_recv done\n");
+ return len - desc.count;
+}
+
+/**
+ * xs_tcp_data_ready - "data ready" callback for TCP sockets
+ * @sk: socket with data to read
+ * @bytes: how much data to read
+ *
+ */
+static void xs_tcp_data_ready(struct sock *sk, int bytes)
+{
+ struct rpc_xprt *xprt;
+ read_descriptor_t rd_desc;
+
+ read_lock(&sk->sk_callback_lock);
+ dprintk("RPC: xs_tcp_data_ready...\n");
+ if (!(xprt = xprt_from_sock(sk)))
+ goto out;
+ if (xprt->shutdown)
+ goto out;
+
+ /* We use rd_desc to pass struct xprt to xs_tcp_data_recv */
+ rd_desc.arg.data = xprt;
+ rd_desc.count = 65536;
+ tcp_read_sock(sk, &rd_desc, xs_tcp_data_recv);
+out:
+ read_unlock(&sk->sk_callback_lock);
+}
+
+/**
+ * xs_tcp_state_change - callback to handle TCP socket state changes
+ * @sk: socket whose state has changed
+ *
+ */
+static void xs_tcp_state_change(struct sock *sk)
+{
+ struct rpc_xprt *xprt;
+
+ read_lock(&sk->sk_callback_lock);
+ if (!(xprt = xprt_from_sock(sk)))
+ goto out;
+ dprintk("RPC: xs_tcp_state_change client %p...\n", xprt);
+ dprintk("RPC: state %x conn %d dead %d zapped %d\n",
+ sk->sk_state, xprt_connected(xprt),
+ sock_flag(sk, SOCK_DEAD),
+ sock_flag(sk, SOCK_ZAPPED));
+
+ switch (sk->sk_state) {
+ case TCP_ESTABLISHED:
+ spin_lock_bh(&xprt->transport_lock);
+ if (!xprt_test_and_set_connected(xprt)) {
+ /* Reset TCP record info */
+ xprt->tcp_offset = 0;
+ xprt->tcp_reclen = 0;
+ xprt->tcp_copied = 0;
+ xprt->tcp_flags = XPRT_COPY_RECM | XPRT_COPY_XID;
+ xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO;
+ xprt_wake_pending_tasks(xprt, 0);
+ }
+ spin_unlock_bh(&xprt->transport_lock);
+ break;
+ case TCP_SYN_SENT:
+ case TCP_SYN_RECV:
+ break;
+ default:
+ xprt_disconnect(xprt);
+ break;
+ }
+ out:
+ read_unlock(&sk->sk_callback_lock);
+}
+
+/**
+ * xs_udp_write_space - callback invoked when socket buffer space
+ * becomes available
+ * @sk: socket whose state has changed
+ *
+ * Called when more output buffer space is available for this socket.
+ * We try not to wake our writers until they can make "significant"
+ * progress, otherwise we'll waste resources thrashing kernel_sendmsg
+ * with a bunch of small requests.
+ */
+static void xs_udp_write_space(struct sock *sk)
+{
+ read_lock(&sk->sk_callback_lock);
+
+ /* from net/core/sock.c:sock_def_write_space */
+ if (sock_writeable(sk)) {
+ struct socket *sock;
+ struct rpc_xprt *xprt;
+
+ if (unlikely(!(sock = sk->sk_socket)))
+ goto out;
+ if (unlikely(!(xprt = xprt_from_sock(sk))))
+ goto out;
+ if (unlikely(!test_and_clear_bit(SOCK_NOSPACE, &sock->flags)))
+ goto out;
+
+ xprt_write_space(xprt);
+ }
+
+ out:
+ read_unlock(&sk->sk_callback_lock);
+}
+
+/**
+ * xs_tcp_write_space - callback invoked when socket buffer space
+ * becomes available
+ * @sk: socket whose state has changed
+ *
+ * Called when more output buffer space is available for this socket.
+ * We try not to wake our writers until they can make "significant"
+ * progress, otherwise we'll waste resources thrashing kernel_sendmsg
+ * with a bunch of small requests.
+ */
+static void xs_tcp_write_space(struct sock *sk)
+{
+ read_lock(&sk->sk_callback_lock);
+
+ /* from net/core/stream.c:sk_stream_write_space */
+ if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk)) {
+ struct socket *sock;
+ struct rpc_xprt *xprt;
+
+ if (unlikely(!(sock = sk->sk_socket)))
+ goto out;
+ if (unlikely(!(xprt = xprt_from_sock(sk))))
+ goto out;
+ if (unlikely(!test_and_clear_bit(SOCK_NOSPACE, &sock->flags)))
+ goto out;
+
+ xprt_write_space(xprt);
+ }
+
+ out:
+ read_unlock(&sk->sk_callback_lock);
+}
+
+static void xs_udp_do_set_buffer_size(struct rpc_xprt *xprt)
+{
+ struct sock *sk = xprt->inet;
+
+ if (xprt->rcvsize) {
+ sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
+ sk->sk_rcvbuf = xprt->rcvsize * xprt->max_reqs * 2;
+ }
+ if (xprt->sndsize) {
+ sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
+ sk->sk_sndbuf = xprt->sndsize * xprt->max_reqs * 2;
+ sk->sk_write_space(sk);
+ }
+}
+
+/**
+ * xs_udp_set_buffer_size - set send and receive limits
+ * @xprt: generic transport
+ * @sndsize: requested size of send buffer, in bytes
+ * @rcvsize: requested size of receive buffer, in bytes
+ *
+ * Set socket send and receive buffer size limits.
+ */
+static void xs_udp_set_buffer_size(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize)
+{
+ xprt->sndsize = 0;
+ if (sndsize)
+ xprt->sndsize = sndsize + 1024;
+ xprt->rcvsize = 0;
+ if (rcvsize)
+ xprt->rcvsize = rcvsize + 1024;
+
+ xs_udp_do_set_buffer_size(xprt);
+}
+
+/**
+ * xs_udp_timer - called when a retransmit timeout occurs on a UDP transport
+ * @task: task that timed out
+ *
+ * Adjust the congestion window after a retransmit timeout has occurred.
+ */
+static void xs_udp_timer(struct rpc_task *task)
+{
+ xprt_adjust_cwnd(task, -ETIMEDOUT);
+}
+
+static int xs_bindresvport(struct rpc_xprt *xprt, struct socket *sock)
+{
+ struct sockaddr_in myaddr = {
+ .sin_family = AF_INET,
+ };
+ int err;
+ unsigned short port = xprt->port;
+
+ do {
+ myaddr.sin_port = htons(port);
+ err = sock->ops->bind(sock, (struct sockaddr *) &myaddr,
+ sizeof(myaddr));
+ if (err == 0) {
+ xprt->port = port;
+ dprintk("RPC: xs_bindresvport bound to port %u\n",
+ port);
+ return 0;
+ }
+ if (port <= xprt_min_resvport)
+ port = xprt_max_resvport;
+ else
+ port--;
+ } while (err == -EADDRINUSE && port != xprt->port);
+
+ dprintk("RPC: can't bind to reserved port (%d).\n", -err);
+ return err;
+}
+
+/**
+ * xs_udp_connect_worker - set up a UDP socket
+ * @args: RPC transport to connect
+ *
+ * Invoked by a work queue tasklet.
+ */
+static void xs_udp_connect_worker(void *args)
+{
+ struct rpc_xprt *xprt = (struct rpc_xprt *) args;
+ struct socket *sock = xprt->sock;
+ int err, status = -EIO;
+
+ if (xprt->shutdown || xprt->addr.sin_port == 0)
+ goto out;
+
+ dprintk("RPC: xs_udp_connect_worker for xprt %p\n", xprt);
+
+ /* Start by resetting any existing state */
+ xs_close(xprt);
+
+ if ((err = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock)) < 0) {
+ dprintk("RPC: can't create UDP transport socket (%d).\n", -err);
+ goto out;
+ }
+
+ if (xprt->resvport && xs_bindresvport(xprt, sock) < 0) {
+ sock_release(sock);
+ goto out;
+ }
+
+ if (!xprt->inet) {
+ struct sock *sk = sock->sk;
+
+ write_lock_bh(&sk->sk_callback_lock);
+
+ sk->sk_user_data = xprt;
+ xprt->old_data_ready = sk->sk_data_ready;
+ xprt->old_state_change = sk->sk_state_change;
+ xprt->old_write_space = sk->sk_write_space;
+ sk->sk_data_ready = xs_udp_data_ready;
+ sk->sk_write_space = xs_udp_write_space;
+ sk->sk_no_check = UDP_CSUM_NORCV;
+
+ xprt_set_connected(xprt);
+
+ /* Reset to new socket */
+ xprt->sock = sock;
+ xprt->inet = sk;
+
+ write_unlock_bh(&sk->sk_callback_lock);
+ }
+ xs_udp_do_set_buffer_size(xprt);
+ status = 0;
+out:
+ xprt_wake_pending_tasks(xprt, status);
+ xprt_clear_connecting(xprt);
+}
+
+/*
+ * We need to preserve the port number so the reply cache on the server can
+ * find our cached RPC replies when we get around to reconnecting.
+ */
+static void xs_tcp_reuse_connection(struct rpc_xprt *xprt)
+{
+ int result;
+ struct socket *sock = xprt->sock;
+ struct sockaddr any;
+
+ dprintk("RPC: disconnecting xprt %p to reuse port\n", xprt);
+
+ /*
+ * Disconnect the transport socket by doing a connect operation
+ * with AF_UNSPEC. This should return immediately...
+ */
+ memset(&any, 0, sizeof(any));
+ any.sa_family = AF_UNSPEC;
+ result = sock->ops->connect(sock, &any, sizeof(any), 0);
+ if (result)
+ dprintk("RPC: AF_UNSPEC connect return code %d\n",
+ result);
+}
+
+/**
+ * xs_tcp_connect_worker - connect a TCP socket to a remote endpoint
+ * @args: RPC transport to connect
+ *
+ * Invoked by a work queue tasklet.
+ */
+static void xs_tcp_connect_worker(void *args)
+{
+ struct rpc_xprt *xprt = (struct rpc_xprt *)args;
+ struct socket *sock = xprt->sock;
+ int err, status = -EIO;
+
+ if (xprt->shutdown || xprt->addr.sin_port == 0)
+ goto out;
+
+ dprintk("RPC: xs_tcp_connect_worker for xprt %p\n", xprt);
+
+ if (!xprt->sock) {
+ /* start from scratch */
+ if ((err = sock_create_kern(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock)) < 0) {
+ dprintk("RPC: can't create TCP transport socket (%d).\n", -err);
+ goto out;
+ }
+
+ if (xprt->resvport && xs_bindresvport(xprt, sock) < 0) {
+ sock_release(sock);
+ goto out;
+ }
+ } else
+ /* "close" the socket, preserving the local port */
+ xs_tcp_reuse_connection(xprt);
+
+ if (!xprt->inet) {
+ struct sock *sk = sock->sk;
+
+ write_lock_bh(&sk->sk_callback_lock);
+
+ sk->sk_user_data = xprt;
+ xprt->old_data_ready = sk->sk_data_ready;
+ xprt->old_state_change = sk->sk_state_change;
+ xprt->old_write_space = sk->sk_write_space;
+ sk->sk_data_ready = xs_tcp_data_ready;
+ sk->sk_state_change = xs_tcp_state_change;
+ sk->sk_write_space = xs_tcp_write_space;
+
+ /* socket options */
+ sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
+ sock_reset_flag(sk, SOCK_LINGER);
+ tcp_sk(sk)->linger2 = 0;
+ tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF;
+
+ xprt_clear_connected(xprt);
+
+ /* Reset to new socket */
+ xprt->sock = sock;
+ xprt->inet = sk;
+
+ write_unlock_bh(&sk->sk_callback_lock);
+ }
+
+ /* Tell the socket layer to start connecting... */
+ status = sock->ops->connect(sock, (struct sockaddr *) &xprt->addr,
+ sizeof(xprt->addr), O_NONBLOCK);
+ dprintk("RPC: %p connect status %d connected %d sock state %d\n",
+ xprt, -status, xprt_connected(xprt), sock->sk->sk_state);
+ if (status < 0) {
+ switch (status) {
+ case -EINPROGRESS:
+ case -EALREADY:
+ goto out_clear;
+ case -ECONNREFUSED:
+ case -ECONNRESET:
+ /* retry with existing socket, after a delay */
+ break;
+ default:
+ /* get rid of existing socket, and retry */
+ xs_close(xprt);
+ break;
+ }
+ }
+out:
+ xprt_wake_pending_tasks(xprt, status);
+out_clear:
+ xprt_clear_connecting(xprt);
+}
+
+/**
+ * xs_connect - connect a socket to a remote endpoint
+ * @task: address of RPC task that manages state of connect request
+ *
+ * TCP: If the remote end dropped the connection, delay reconnecting.
+ *
+ * UDP socket connects are synchronous, but we use a work queue anyway
+ * to guarantee that even unprivileged user processes can set up a
+ * socket on a privileged port.
+ *
+ * If a UDP socket connect fails, the delay behavior here prevents
+ * retry floods (hard mounts).
+ */
+static void xs_connect(struct rpc_task *task)
+{
+ struct rpc_xprt *xprt = task->tk_xprt;
+
+ if (xprt_test_and_set_connecting(xprt))
+ return;
+
+ if (xprt->sock != NULL) {
+ dprintk("RPC: xs_connect delayed xprt %p for %lu seconds\n",
+ xprt, xprt->reestablish_timeout / HZ);
+ schedule_delayed_work(&xprt->connect_worker,
+ xprt->reestablish_timeout);
+ xprt->reestablish_timeout <<= 1;
+ if (xprt->reestablish_timeout > XS_TCP_MAX_REEST_TO)
+ xprt->reestablish_timeout = XS_TCP_MAX_REEST_TO;
+ } else {
+ dprintk("RPC: xs_connect scheduled xprt %p\n", xprt);
+ schedule_work(&xprt->connect_worker);
+
+ /* flush_scheduled_work can sleep... */
+ if (!RPC_IS_ASYNC(task))
+ flush_scheduled_work();
+ }
+}
+
+static struct rpc_xprt_ops xs_udp_ops = {
+ .set_buffer_size = xs_udp_set_buffer_size,
+ .reserve_xprt = xprt_reserve_xprt_cong,
+ .release_xprt = xprt_release_xprt_cong,
+ .connect = xs_connect,
+ .send_request = xs_udp_send_request,
+ .set_retrans_timeout = xprt_set_retrans_timeout_rtt,
+ .timer = xs_udp_timer,
+ .release_request = xprt_release_rqst_cong,
+ .close = xs_close,
+ .destroy = xs_destroy,
+};
+
+static struct rpc_xprt_ops xs_tcp_ops = {
+ .reserve_xprt = xprt_reserve_xprt,
+ .release_xprt = xprt_release_xprt,
+ .connect = xs_connect,
+ .send_request = xs_tcp_send_request,
+ .set_retrans_timeout = xprt_set_retrans_timeout_def,
+ .close = xs_close,
+ .destroy = xs_destroy,
+};
+
+/**
+ * xs_setup_udp - Set up transport to use a UDP socket
+ * @xprt: transport to set up
+ * @to: timeout parameters
+ *
+ */
+int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to)
+{
+ size_t slot_table_size;
+
+ dprintk("RPC: setting up udp-ipv4 transport...\n");
+
+ xprt->max_reqs = xprt_udp_slot_table_entries;
+ slot_table_size = xprt->max_reqs * sizeof(xprt->slot[0]);
+ xprt->slot = kmalloc(slot_table_size, GFP_KERNEL);
+ if (xprt->slot == NULL)
+ return -ENOMEM;
+ memset(xprt->slot, 0, slot_table_size);
+
+ xprt->prot = IPPROTO_UDP;
+ xprt->port = xprt_max_resvport;
+ xprt->tsh_size = 0;
+ xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0;
+ /* XXX: header size can vary due to auth type, IPv6, etc. */
+ xprt->max_payload = (1U << 16) - (MAX_HEADER << 3);
+
+ INIT_WORK(&xprt->connect_worker, xs_udp_connect_worker, xprt);
+ xprt->bind_timeout = XS_BIND_TO;
+ xprt->connect_timeout = XS_UDP_CONN_TO;
+ xprt->reestablish_timeout = XS_UDP_REEST_TO;
+ xprt->idle_timeout = XS_IDLE_DISC_TO;
+
+ xprt->ops = &xs_udp_ops;
+
+ if (to)
+ xprt->timeout = *to;
+ else
+ xprt_set_timeout(&xprt->timeout, 5, 5 * HZ);
+
+ return 0;
+}
+
+/**
+ * xs_setup_tcp - Set up transport to use a TCP socket
+ * @xprt: transport to set up
+ * @to: timeout parameters
+ *
+ */
+int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to)
+{
+ size_t slot_table_size;
+
+ dprintk("RPC: setting up tcp-ipv4 transport...\n");
+
+ xprt->max_reqs = xprt_tcp_slot_table_entries;
+ slot_table_size = xprt->max_reqs * sizeof(xprt->slot[0]);
+ xprt->slot = kmalloc(slot_table_size, GFP_KERNEL);
+ if (xprt->slot == NULL)
+ return -ENOMEM;
+ memset(xprt->slot, 0, slot_table_size);
+
+ xprt->prot = IPPROTO_TCP;
+ xprt->port = xprt_max_resvport;
+ xprt->tsh_size = sizeof(rpc_fraghdr) / sizeof(u32);
+ xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0;
+ xprt->max_payload = RPC_MAX_FRAGMENT_SIZE;
+
+ INIT_WORK(&xprt->connect_worker, xs_tcp_connect_worker, xprt);
+ xprt->bind_timeout = XS_BIND_TO;
+ xprt->connect_timeout = XS_TCP_CONN_TO;
+ xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO;
+ xprt->idle_timeout = XS_IDLE_DISC_TO;
+
+ xprt->ops = &xs_tcp_ops;
+
+ if (to)
+ xprt->timeout = *to;
+ else
+ xprt_set_timeout(&xprt->timeout, 2, 60 * HZ);
+
+ return 0;
+}
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index cbb0ba3..0db9e57 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1192,46 +1192,6 @@
EXPORT_SYMBOL(xfrm_bundle_ok);
-/* Well... that's _TASK_. We need to scan through transformation
- * list and figure out what mss tcp should generate in order to
- * final datagram fit to mtu. Mama mia... :-)
- *
- * Apparently, some easy way exists, but we used to choose the most
- * bizarre ones. :-) So, raising Kalashnikov... tra-ta-ta.
- *
- * Consider this function as something like dark humour. :-)
- */
-static int xfrm_get_mss(struct dst_entry *dst, u32 mtu)
-{
- int res = mtu - dst->header_len;
-
- for (;;) {
- struct dst_entry *d = dst;
- int m = res;
-
- do {
- struct xfrm_state *x = d->xfrm;
- if (x) {
- spin_lock_bh(&x->lock);
- if (x->km.state == XFRM_STATE_VALID &&
- x->type && x->type->get_max_size)
- m = x->type->get_max_size(d->xfrm, m);
- else
- m += x->props.header_len;
- spin_unlock_bh(&x->lock);
- }
- } while ((d = d->child) != NULL);
-
- if (m <= mtu)
- break;
- res -= (m - mtu);
- if (res < 88)
- return mtu;
- }
-
- return res + dst->header_len;
-}
-
int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
{
int err = 0;
@@ -1252,8 +1212,6 @@
dst_ops->negative_advice = xfrm_negative_advice;
if (likely(dst_ops->link_failure == NULL))
dst_ops->link_failure = xfrm_link_failure;
- if (likely(dst_ops->get_mss == NULL))
- dst_ops->get_mss = xfrm_get_mss;
if (likely(afinfo->garbage_collect == NULL))
afinfo->garbage_collect = __xfrm_garbage_collect;
xfrm_policy_afinfo[afinfo->family] = afinfo;
@@ -1281,7 +1239,6 @@
dst_ops->check = NULL;
dst_ops->negative_advice = NULL;
dst_ops->link_failure = NULL;
- dst_ops->get_mss = NULL;
afinfo->garbage_collect = NULL;
}
}
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 9d206c2..8b9a474 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1026,6 +1026,12 @@
}
EXPORT_SYMBOL(xfrm_state_delete_tunnel);
+/*
+ * This function is NOT optimal. For example, with ESP it will give an
+ * MTU that's usually two bytes short of being optimal. However, it will
+ * usually give an answer that's a multiple of 4 provided the input is
+ * also a multiple of 4.
+ */
int xfrm_state_mtu(struct xfrm_state *x, int mtu)
{
int res = mtu;
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 2fcb244..0dd9691 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -116,6 +116,15 @@
clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
.tmp_gtkcheck zconf.tab.c zconf.tab.h lex.zconf.c
+# Needed for systems without gettext
+KBUILD_HAVE_NLS := $(shell \
+ if echo "\#include <libint.h>" | $(HOSTCC) $(HOSTCFLAGS) -E - > /dev/null 2>&1 ; \
+ then echo yes ; \
+ else echo no ; fi)
+ifeq ($(KBUILD_HAVE_NLS),no)
+HOSTCFLAGS += -DKBUILD_NO_NLS
+endif
+
# generated files seem to need this to find local include files
HOSTCFLAGS_lex.zconf.o := -I$(src)
HOSTCFLAGS_zconf.tab.o := -I$(src)
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index c3d2578..5fba1fe 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -8,7 +8,13 @@
#include "expr.h"
-#include <libintl.h>
+#ifndef KBUILD_NO_NLS
+# include <libintl.h>
+#else
+# define gettext(Msgid) ((const char *) (Msgid))
+# define textdomain(Domainname) ((const char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+#endif
#ifdef __cplusplus
extern "C" {
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 457bec2..d1ad405 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -219,6 +219,7 @@
search_help[] = N_(
"\n"
"Search for CONFIG_ symbols and display their relations.\n"
+ "Regular expressions are allowed.\n"
"Example: search for \"^FOO\"\n"
"Result:\n"
"-----------------------------------------------------------------\n"
@@ -531,7 +532,7 @@
cprint("--title");
cprint(_("Search Configuration Parameter"));
cprint("--inputbox");
- cprint(_("Enter Keyword"));
+ cprint(_("Enter CONFIG_ (sub)string to search for (omit CONFIG_)"));
cprint("10");
cprint("75");
cprint("");
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index f2ee673..e3d144a 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -359,6 +359,13 @@
return 1;
}
+static int do_i2c_entry(const char *filename, struct i2c_device_id *i2c, char *alias)
+{
+ strcpy(alias, "i2c:");
+ ADD(alias, "id", 1, i2c->id);
+ return 1;
+}
+
/* Ignore any prefix, eg. v850 prepends _ */
static inline int sym_is(const char *symbol, const char *name)
{
@@ -443,6 +450,9 @@
else if (sym_is(symname, "__mod_vio_device_table"))
do_table(symval, sym->st_size, sizeof(struct vio_device_id),
do_vio_entry, mod);
+ else if (sym_is(symname, "__mod_i2c_device_table"))
+ do_table(symval, sym->st_size, sizeof(struct i2c_device_id),
+ do_i2c_entry, mod);
}
diff --git a/security/dummy.c b/security/dummy.c
index 9623a61..3ca5f2b 100644
--- a/security/dummy.c
+++ b/security/dummy.c
@@ -377,7 +377,7 @@
return 0;
}
-static int dummy_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size)
+static int dummy_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size, int err)
{
return -EOPNOTSUPP;
}
@@ -768,7 +768,7 @@
return -ENOPROTOOPT;
}
-static inline int dummy_sk_alloc_security (struct sock *sk, int family, int priority)
+static inline int dummy_sk_alloc_security (struct sock *sk, int family, gfp_t priority)
{
return 0;
}
@@ -803,6 +803,23 @@
return -EINVAL;
}
+#ifdef CONFIG_KEYS
+static inline int dummy_key_alloc(struct key *key)
+{
+ return 0;
+}
+
+static inline void dummy_key_free(struct key *key)
+{
+}
+
+static inline int dummy_key_permission(key_ref_t key_ref,
+ struct task_struct *context,
+ key_perm_t perm)
+{
+ return 0;
+}
+#endif /* CONFIG_KEYS */
struct security_operations dummy_security_ops;
@@ -954,5 +971,11 @@
set_to_dummy_if_null(ops, sk_alloc_security);
set_to_dummy_if_null(ops, sk_free_security);
#endif /* CONFIG_SECURITY_NETWORK */
+#ifdef CONFIG_KEYS
+ set_to_dummy_if_null(ops, key_alloc);
+ set_to_dummy_if_null(ops, key_free);
+ set_to_dummy_if_null(ops, key_permission);
+#endif /* CONFIG_KEYS */
+
}
diff --git a/security/keys/key.c b/security/keys/key.c
index 2182be9..ccde17a 100644
--- a/security/keys/key.c
+++ b/security/keys/key.c
@@ -1,6 +1,6 @@
/* key.c: basic authentication token and access key management
*
- * Copyright (C) 2004-5 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/security.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include "internal.h"
@@ -253,6 +254,7 @@
struct key_user *user = NULL;
struct key *key;
size_t desclen, quotalen;
+ int ret;
key = ERR_PTR(-EINVAL);
if (!desc || !*desc)
@@ -305,6 +307,7 @@
key->flags = 0;
key->expiry = 0;
key->payload.data = NULL;
+ key->security = NULL;
if (!not_in_quota)
key->flags |= 1 << KEY_FLAG_IN_QUOTA;
@@ -315,16 +318,21 @@
key->magic = KEY_DEBUG_MAGIC;
#endif
+ /* let the security module know about the key */
+ ret = security_key_alloc(key);
+ if (ret < 0)
+ goto security_error;
+
/* publish the key by giving it a serial number */
atomic_inc(&user->nkeys);
key_alloc_serial(key);
- error:
+error:
return key;
- no_memory_3:
+security_error:
+ kfree(key->description);
kmem_cache_free(key_jar, key);
- no_memory_2:
if (!not_in_quota) {
spin_lock(&user->lock);
user->qnkeys--;
@@ -332,11 +340,24 @@
spin_unlock(&user->lock);
}
key_user_put(user);
- no_memory_1:
+ key = ERR_PTR(ret);
+ goto error;
+
+no_memory_3:
+ kmem_cache_free(key_jar, key);
+no_memory_2:
+ if (!not_in_quota) {
+ spin_lock(&user->lock);
+ user->qnkeys--;
+ user->qnbytes -= quotalen;
+ spin_unlock(&user->lock);
+ }
+ key_user_put(user);
+no_memory_1:
key = ERR_PTR(-ENOMEM);
goto error;
- no_quota:
+no_quota:
spin_unlock(&user->lock);
key_user_put(user);
key = ERR_PTR(-EDQUOT);
@@ -556,6 +577,8 @@
key_check(key);
+ security_key_free(key);
+
/* deal with the user's key tracking and quota */
if (test_bit(KEY_FLAG_IN_QUOTA, &key->flags)) {
spin_lock(&key->user->lock);
@@ -700,8 +723,8 @@
int ret;
/* need write permission on the key to update it */
- ret = -EACCES;
- if (!key_permission(key_ref, KEY_WRITE))
+ ret = key_permission(key_ref, KEY_WRITE);
+ if (ret < 0)
goto error;
ret = -EEXIST;
@@ -711,7 +734,6 @@
down_write(&key->sem);
ret = key->type->update(key, payload, plen);
-
if (ret == 0)
/* updating a negative key instantiates it */
clear_bit(KEY_FLAG_NEGATIVE, &key->flags);
@@ -768,9 +790,11 @@
/* if we're going to allocate a new key, we're going to have
* to modify the keyring */
- key_ref = ERR_PTR(-EACCES);
- if (!key_permission(keyring_ref, KEY_WRITE))
+ ret = key_permission(keyring_ref, KEY_WRITE);
+ if (ret < 0) {
+ key_ref = ERR_PTR(ret);
goto error_3;
+ }
/* search for an existing key of the same type and description in the
* destination keyring
@@ -780,8 +804,8 @@
goto found_matching_key;
/* decide on the permissions we want */
- perm = KEY_POS_VIEW | KEY_POS_SEARCH | KEY_POS_LINK;
- perm |= KEY_USR_VIEW | KEY_USR_SEARCH | KEY_USR_LINK;
+ perm = KEY_POS_VIEW | KEY_POS_SEARCH | KEY_POS_LINK | KEY_POS_SETATTR;
+ perm |= KEY_USR_VIEW | KEY_USR_SEARCH | KEY_USR_LINK | KEY_USR_SETATTR;
if (ktype->read)
perm |= KEY_POS_READ | KEY_USR_READ;
@@ -840,16 +864,16 @@
key_check(key);
/* the key must be writable */
- ret = -EACCES;
- if (!key_permission(key_ref, KEY_WRITE))
+ ret = key_permission(key_ref, KEY_WRITE);
+ if (ret < 0)
goto error;
/* attempt to update it if supported */
ret = -EOPNOTSUPP;
if (key->type->update) {
down_write(&key->sem);
- ret = key->type->update(key, payload, plen);
+ ret = key->type->update(key, payload, plen);
if (ret == 0)
/* updating a negative key instantiates it */
clear_bit(KEY_FLAG_NEGATIVE, &key->flags);
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 4c670ee..b7a468f 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -624,8 +624,8 @@
/* link the resulting key to the destination keyring if we can */
if (dest_ref) {
- ret = -EACCES;
- if (!key_permission(key_ref, KEY_LINK))
+ ret = key_permission(key_ref, KEY_LINK);
+ if (ret < 0)
goto error6;
ret = key_link(key_ref_to_ptr(dest_ref), key_ref_to_ptr(key_ref));
@@ -676,8 +676,11 @@
key = key_ref_to_ptr(key_ref);
/* see if we can read it directly */
- if (key_permission(key_ref, KEY_READ))
+ ret = key_permission(key_ref, KEY_READ);
+ if (ret == 0)
goto can_read_key;
+ if (ret != -EACCES)
+ goto error;
/* we can't; see if it's searchable from this process's keyrings
* - we automatically take account of the fact that it may be
@@ -726,7 +729,7 @@
if (uid == (uid_t) -1 && gid == (gid_t) -1)
goto error;
- key_ref = lookup_user_key(NULL, id, 1, 1, 0);
+ key_ref = lookup_user_key(NULL, id, 1, 1, KEY_SETATTR);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
@@ -786,7 +789,7 @@
if (perm & ~(KEY_POS_ALL | KEY_USR_ALL | KEY_GRP_ALL | KEY_OTH_ALL))
goto error;
- key_ref = lookup_user_key(NULL, id, 1, 1, 0);
+ key_ref = lookup_user_key(NULL, id, 1, 1, KEY_SETATTR);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index 0639396..e1cc4dd 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/security.h>
#include <linux/seq_file.h>
#include <linux/err.h>
#include <asm/uaccess.h>
@@ -309,7 +310,9 @@
int ret;
keyring = key_alloc(&key_type_keyring, description,
- uid, gid, KEY_POS_ALL | KEY_USR_ALL, not_in_quota);
+ uid, gid,
+ (KEY_POS_ALL & ~KEY_POS_SETATTR) | KEY_USR_ALL,
+ not_in_quota);
if (!IS_ERR(keyring)) {
ret = key_instantiate_and_link(keyring, NULL, 0, dest, NULL);
@@ -359,9 +362,11 @@
key_check(keyring);
/* top keyring must have search permission to begin the search */
- key_ref = ERR_PTR(-EACCES);
- if (!key_task_permission(keyring_ref, context, KEY_SEARCH))
+ err = key_task_permission(keyring_ref, context, KEY_SEARCH);
+ if (err < 0) {
+ key_ref = ERR_PTR(err);
goto error;
+ }
key_ref = ERR_PTR(-ENOTDIR);
if (keyring->type != &key_type_keyring)
@@ -402,8 +407,8 @@
continue;
/* key must have search permissions */
- if (!key_task_permission(make_key_ref(key, possessed),
- context, KEY_SEARCH))
+ if (key_task_permission(make_key_ref(key, possessed),
+ context, KEY_SEARCH) < 0)
continue;
/* we set a different error code if we find a negative key */
@@ -430,7 +435,7 @@
continue;
if (!key_task_permission(make_key_ref(key, possessed),
- context, KEY_SEARCH))
+ context, KEY_SEARCH) < 0)
continue;
/* stack the current position */
@@ -521,7 +526,7 @@
(!key->type->match ||
key->type->match(key, description)) &&
key_permission(make_key_ref(key, possessed),
- perm) &&
+ perm) < 0 &&
!test_bit(KEY_FLAG_REVOKED, &key->flags)
)
goto found;
@@ -617,7 +622,7 @@
continue;
if (!key_permission(make_key_ref(keyring, 0),
- KEY_SEARCH))
+ KEY_SEARCH) < 0)
continue;
/* found a potential candidate, but we still need to
diff --git a/security/keys/permission.c b/security/keys/permission.c
index 03db073..e7f579c 100644
--- a/security/keys/permission.c
+++ b/security/keys/permission.c
@@ -10,6 +10,7 @@
*/
#include <linux/module.h>
+#include <linux/security.h>
#include "internal.h"
/*****************************************************************************/
@@ -63,7 +64,11 @@
kperm = kperm & perm & KEY_ALL;
- return kperm == perm;
+ if (kperm != perm)
+ return -EACCES;
+
+ /* let LSM be the final arbiter */
+ return security_key_permission(key_ref, context, perm);
} /* end key_task_permission() */
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index d42d215..566b1cc 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -39,7 +39,7 @@
.type = &key_type_keyring,
.user = &root_key_user,
.sem = __RWSEM_INITIALIZER(root_user_keyring.sem),
- .perm = KEY_POS_ALL | KEY_USR_ALL,
+ .perm = (KEY_POS_ALL & ~KEY_POS_SETATTR) | KEY_USR_ALL,
.flags = 1 << KEY_FLAG_INSTANTIATED,
.description = "_uid.0",
#ifdef KEY_DEBUGGING
@@ -54,7 +54,7 @@
.type = &key_type_keyring,
.user = &root_key_user,
.sem = __RWSEM_INITIALIZER(root_session_keyring.sem),
- .perm = KEY_POS_ALL | KEY_USR_ALL,
+ .perm = (KEY_POS_ALL & ~KEY_POS_SETATTR) | KEY_USR_ALL,
.flags = 1 << KEY_FLAG_INSTANTIATED,
.description = "_uid_ses.0",
#ifdef KEY_DEBUGGING
@@ -666,9 +666,8 @@
goto invalid_key;
/* check the permissions */
- ret = -EACCES;
-
- if (!key_task_permission(key_ref, context, perm))
+ ret = key_task_permission(key_ref, context, perm);
+ if (ret < 0)
goto invalid_key;
error:
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index e446acb..cbda3b2 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -15,18 +15,10 @@
#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/err.h>
+#include <keys/user-type.h>
#include <asm/uaccess.h>
#include "internal.h"
-static int user_instantiate(struct key *key, const void *data, size_t datalen);
-static int user_duplicate(struct key *key, const struct key *source);
-static int user_update(struct key *key, const void *data, size_t datalen);
-static int user_match(const struct key *key, const void *criterion);
-static void user_destroy(struct key *key);
-static void user_describe(const struct key *user, struct seq_file *m);
-static long user_read(const struct key *key,
- char __user *buffer, size_t buflen);
-
/*
* user defined keys take an arbitrary string as the description and an
* arbitrary blob of data as the payload
@@ -42,19 +34,13 @@
.read = user_read,
};
-struct user_key_payload {
- struct rcu_head rcu; /* RCU destructor */
- unsigned short datalen; /* length of this data */
- char data[0]; /* actual data */
-};
-
EXPORT_SYMBOL_GPL(key_type_user);
/*****************************************************************************/
/*
* instantiate a user defined key
*/
-static int user_instantiate(struct key *key, const void *data, size_t datalen)
+int user_instantiate(struct key *key, const void *data, size_t datalen)
{
struct user_key_payload *upayload;
int ret;
@@ -78,18 +64,20 @@
rcu_assign_pointer(key->payload.data, upayload);
ret = 0;
- error:
+error:
return ret;
} /* end user_instantiate() */
+EXPORT_SYMBOL_GPL(user_instantiate);
+
/*****************************************************************************/
/*
* duplicate a user defined key
* - both keys' semaphores are locked against further modification
* - the new key cannot yet be accessed
*/
-static int user_duplicate(struct key *key, const struct key *source)
+int user_duplicate(struct key *key, const struct key *source)
{
struct user_key_payload *upayload, *spayload;
int ret;
@@ -112,6 +100,8 @@
} /* end user_duplicate() */
+EXPORT_SYMBOL_GPL(user_duplicate);
+
/*****************************************************************************/
/*
* dispose of the old data from an updated user defined key
@@ -131,7 +121,7 @@
* update a user defined key
* - the key's semaphore is write-locked
*/
-static int user_update(struct key *key, const void *data, size_t datalen)
+int user_update(struct key *key, const void *data, size_t datalen)
{
struct user_key_payload *upayload, *zap;
int ret;
@@ -163,26 +153,30 @@
call_rcu(&zap->rcu, user_update_rcu_disposal);
- error:
+error:
return ret;
} /* end user_update() */
+EXPORT_SYMBOL_GPL(user_update);
+
/*****************************************************************************/
/*
* match users on their name
*/
-static int user_match(const struct key *key, const void *description)
+int user_match(const struct key *key, const void *description)
{
return strcmp(key->description, description) == 0;
} /* end user_match() */
+EXPORT_SYMBOL_GPL(user_match);
+
/*****************************************************************************/
/*
* dispose of the data dangling from the corpse of a user
*/
-static void user_destroy(struct key *key)
+void user_destroy(struct key *key)
{
struct user_key_payload *upayload = key->payload.data;
@@ -190,11 +184,13 @@
} /* end user_destroy() */
+EXPORT_SYMBOL_GPL(user_destroy);
+
/*****************************************************************************/
/*
* describe the user key
*/
-static void user_describe(const struct key *key, struct seq_file *m)
+void user_describe(const struct key *key, struct seq_file *m)
{
seq_puts(m, key->description);
@@ -202,13 +198,14 @@
} /* end user_describe() */
+EXPORT_SYMBOL_GPL(user_describe);
+
/*****************************************************************************/
/*
* read the key data
* - the key's semaphore is read-locked
*/
-static long user_read(const struct key *key,
- char __user *buffer, size_t buflen)
+long user_read(const struct key *key, char __user *buffer, size_t buflen)
{
struct user_key_payload *upayload;
long ret;
@@ -228,3 +225,5 @@
return ret;
} /* end user_read() */
+
+EXPORT_SYMBOL_GPL(user_read);
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index b13be15..45c4149 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -122,11 +122,10 @@
{
struct task_security_struct *tsec;
- tsec = kmalloc(sizeof(struct task_security_struct), GFP_KERNEL);
+ tsec = kzalloc(sizeof(struct task_security_struct), GFP_KERNEL);
if (!tsec)
return -ENOMEM;
- memset(tsec, 0, sizeof(struct task_security_struct));
tsec->magic = SELINUX_MAGIC;
tsec->task = task;
tsec->osid = tsec->sid = tsec->ptrace_sid = SECINITSID_UNLABELED;
@@ -151,11 +150,10 @@
struct task_security_struct *tsec = current->security;
struct inode_security_struct *isec;
- isec = kmalloc(sizeof(struct inode_security_struct), GFP_KERNEL);
+ isec = kzalloc(sizeof(struct inode_security_struct), GFP_KERNEL);
if (!isec)
return -ENOMEM;
- memset(isec, 0, sizeof(struct inode_security_struct));
init_MUTEX(&isec->sem);
INIT_LIST_HEAD(&isec->list);
isec->magic = SELINUX_MAGIC;
@@ -193,11 +191,10 @@
struct task_security_struct *tsec = current->security;
struct file_security_struct *fsec;
- fsec = kmalloc(sizeof(struct file_security_struct), GFP_ATOMIC);
+ fsec = kzalloc(sizeof(struct file_security_struct), GFP_ATOMIC);
if (!fsec)
return -ENOMEM;
- memset(fsec, 0, sizeof(struct file_security_struct));
fsec->magic = SELINUX_MAGIC;
fsec->file = file;
if (tsec && tsec->magic == SELINUX_MAGIC) {
@@ -227,11 +224,10 @@
{
struct superblock_security_struct *sbsec;
- sbsec = kmalloc(sizeof(struct superblock_security_struct), GFP_KERNEL);
+ sbsec = kzalloc(sizeof(struct superblock_security_struct), GFP_KERNEL);
if (!sbsec)
return -ENOMEM;
- memset(sbsec, 0, sizeof(struct superblock_security_struct));
init_MUTEX(&sbsec->sem);
INIT_LIST_HEAD(&sbsec->list);
INIT_LIST_HEAD(&sbsec->isec_head);
@@ -262,18 +258,17 @@
}
#ifdef CONFIG_SECURITY_NETWORK
-static int sk_alloc_security(struct sock *sk, int family, int priority)
+static int sk_alloc_security(struct sock *sk, int family, gfp_t priority)
{
struct sk_security_struct *ssec;
if (family != PF_UNIX)
return 0;
- ssec = kmalloc(sizeof(*ssec), priority);
+ ssec = kzalloc(sizeof(*ssec), priority);
if (!ssec)
return -ENOMEM;
- memset(ssec, 0, sizeof(*ssec));
ssec->magic = SELINUX_MAGIC;
ssec->sk = sk;
ssec->peer_sid = SECINITSID_UNLABELED;
@@ -1483,11 +1478,10 @@
{
struct bprm_security_struct *bsec;
- bsec = kmalloc(sizeof(struct bprm_security_struct), GFP_KERNEL);
+ bsec = kzalloc(sizeof(struct bprm_security_struct), GFP_KERNEL);
if (!bsec)
return -ENOMEM;
- memset(bsec, 0, sizeof *bsec);
bsec->magic = SELINUX_MAGIC;
bsec->bprm = bprm;
bsec->sid = SECINITSID_UNLABELED;
@@ -1615,7 +1609,7 @@
if (tty) {
file_list_lock();
- file = list_entry(tty->tty_files.next, typeof(*file), f_list);
+ file = list_entry(tty->tty_files.next, typeof(*file), f_u.fu_list);
if (file) {
/* Revalidate access to controlling tty.
Use inode_has_perm on the tty inode directly rather
@@ -2211,12 +2205,6 @@
static int selinux_inode_getxattr (struct dentry *dentry, char *name)
{
- struct inode *inode = dentry->d_inode;
- struct superblock_security_struct *sbsec = inode->i_sb->s_security;
-
- if (sbsec->behavior == SECURITY_FS_USE_MNTPOINT)
- return -EOPNOTSUPP;
-
return dentry_has_perm(current, NULL, dentry, FILE__GETATTR);
}
@@ -2247,33 +2235,54 @@
return -EACCES;
}
-static int selinux_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size)
+/*
+ * Copy the in-core inode security context value to the user. If the
+ * getxattr() prior to this succeeded, check to see if we need to
+ * canonicalize the value to be finally returned to the user.
+ *
+ * Permission check is handled by selinux_inode_getxattr hook.
+ */
+static int selinux_inode_getsecurity(struct inode *inode, const char *name, void *buffer, size_t size, int err)
{
struct inode_security_struct *isec = inode->i_security;
char *context;
unsigned len;
int rc;
- /* Permission check handled by selinux_inode_getxattr hook.*/
-
- if (strcmp(name, XATTR_SELINUX_SUFFIX))
- return -EOPNOTSUPP;
+ if (strcmp(name, XATTR_SELINUX_SUFFIX)) {
+ rc = -EOPNOTSUPP;
+ goto out;
+ }
rc = security_sid_to_context(isec->sid, &context, &len);
if (rc)
- return rc;
+ goto out;
+ /* Probe for required buffer size */
if (!buffer || !size) {
- kfree(context);
- return len;
+ rc = len;
+ goto out_free;
}
+
if (size < len) {
- kfree(context);
- return -ERANGE;
+ rc = -ERANGE;
+ goto out_free;
+ }
+
+ if (err > 0) {
+ if ((len == err) && !(memcmp(context, buffer, len))) {
+ /* Don't need to canonicalize value */
+ rc = err;
+ goto out_free;
+ }
+ memset(buffer, 0, size);
}
memcpy(buffer, context, len);
+ rc = len;
+out_free:
kfree(context);
- return len;
+out:
+ return rc;
}
static int selinux_inode_setsecurity(struct inode *inode, const char *name,
@@ -2704,8 +2713,7 @@
if (rc)
return rc;
- if (info && ((unsigned long)info == 1 ||
- (unsigned long)info == 2 || SI_FROMKERNEL(info)))
+ if (info != SEND_SIG_NOINFO && (is_si_special(info) || SI_FROMKERNEL(info)))
return 0;
if (!sig)
@@ -3380,7 +3388,7 @@
return err;
}
-static int selinux_sk_alloc_security(struct sock *sk, int family, int priority)
+static int selinux_sk_alloc_security(struct sock *sk, int family, gfp_t priority)
{
return sk_alloc_security(sk, family, priority);
}
@@ -3599,11 +3607,10 @@
struct task_security_struct *tsec = task->security;
struct ipc_security_struct *isec;
- isec = kmalloc(sizeof(struct ipc_security_struct), GFP_KERNEL);
+ isec = kzalloc(sizeof(struct ipc_security_struct), GFP_KERNEL);
if (!isec)
return -ENOMEM;
- memset(isec, 0, sizeof(struct ipc_security_struct));
isec->magic = SELINUX_MAGIC;
isec->sclass = sclass;
isec->ipc_perm = perm;
@@ -3631,11 +3638,10 @@
{
struct msg_security_struct *msec;
- msec = kmalloc(sizeof(struct msg_security_struct), GFP_KERNEL);
+ msec = kzalloc(sizeof(struct msg_security_struct), GFP_KERNEL);
if (!msec)
return -ENOMEM;
- memset(msec, 0, sizeof(struct msg_security_struct));
msec->magic = SELINUX_MAGIC;
msec->msg = msg;
msec->sid = SECINITSID_UNLABELED;
diff --git a/security/selinux/netif.c b/security/selinux/netif.c
index 718d7be..b10c34e 100644
--- a/security/selinux/netif.c
+++ b/security/selinux/netif.c
@@ -114,13 +114,12 @@
if (likely(netif != NULL))
goto out;
- new = kmalloc(sizeof(*new), GFP_ATOMIC);
+ new = kzalloc(sizeof(*new), GFP_ATOMIC);
if (!new) {
netif = ERR_PTR(-ENOMEM);
goto out;
}
- memset(new, 0, sizeof(*new));
nsec = &new->nsec;
ret = security_netif_sid(dev->name, &nsec->if_sid, &nsec->msg_sid);
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index a45cc97..fdc3823 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -105,7 +105,7 @@
ssize_t length;
int new_value;
- if (count < 0 || count >= PAGE_SIZE)
+ if (count >= PAGE_SIZE)
return -ENOMEM;
if (*ppos != 0) {
/* No partial writes. */
@@ -155,7 +155,7 @@
int new_value;
extern int selinux_disable(void);
- if (count < 0 || count >= PAGE_SIZE)
+ if (count >= PAGE_SIZE)
return -ENOMEM;
if (*ppos != 0) {
/* No partial writes. */
@@ -242,7 +242,7 @@
goto out;
}
- if ((count < 0) || (count > 64 * 1024 * 1024)
+ if ((count > 64 * 1024 * 1024)
|| (data = vmalloc(count)) == NULL) {
length = -ENOMEM;
goto out;
@@ -284,7 +284,7 @@
if (length)
return length;
- if (count < 0 || count >= PAGE_SIZE)
+ if (count >= PAGE_SIZE)
return -ENOMEM;
if (*ppos != 0) {
/* No partial writes. */
@@ -332,7 +332,7 @@
if (length)
return length;
- if (count < 0 || count >= PAGE_SIZE)
+ if (count >= PAGE_SIZE)
return -ENOMEM;
if (*ppos != 0) {
/* No partial writes. */
@@ -424,15 +424,13 @@
return length;
length = -ENOMEM;
- scon = kmalloc(size+1, GFP_KERNEL);
+ scon = kzalloc(size+1, GFP_KERNEL);
if (!scon)
return length;
- memset(scon, 0, size+1);
- tcon = kmalloc(size+1, GFP_KERNEL);
+ tcon = kzalloc(size+1, GFP_KERNEL);
if (!tcon)
goto out;
- memset(tcon, 0, size+1);
length = -EINVAL;
if (sscanf(buf, "%s %s %hu %x", scon, tcon, &tclass, &req) != 4)
@@ -475,15 +473,13 @@
return length;
length = -ENOMEM;
- scon = kmalloc(size+1, GFP_KERNEL);
+ scon = kzalloc(size+1, GFP_KERNEL);
if (!scon)
return length;
- memset(scon, 0, size+1);
- tcon = kmalloc(size+1, GFP_KERNEL);
+ tcon = kzalloc(size+1, GFP_KERNEL);
if (!tcon)
goto out;
- memset(tcon, 0, size+1);
length = -EINVAL;
if (sscanf(buf, "%s %s %hu", scon, tcon, &tclass) != 3)
@@ -536,15 +532,13 @@
return length;
length = -ENOMEM;
- scon = kmalloc(size+1, GFP_KERNEL);
+ scon = kzalloc(size+1, GFP_KERNEL);
if (!scon)
return length;
- memset(scon, 0, size+1);
- tcon = kmalloc(size+1, GFP_KERNEL);
+ tcon = kzalloc(size+1, GFP_KERNEL);
if (!tcon)
goto out;
- memset(tcon, 0, size+1);
length = -EINVAL;
if (sscanf(buf, "%s %s %hu", scon, tcon, &tclass) != 3)
@@ -595,15 +589,13 @@
return length;
length = -ENOMEM;
- con = kmalloc(size+1, GFP_KERNEL);
+ con = kzalloc(size+1, GFP_KERNEL);
if (!con)
return length;
- memset(con, 0, size+1);
- user = kmalloc(size+1, GFP_KERNEL);
+ user = kzalloc(size+1, GFP_KERNEL);
if (!user)
goto out;
- memset(user, 0, size+1);
length = -EINVAL;
if (sscanf(buf, "%s %s", con, user) != 2)
@@ -658,15 +650,13 @@
return length;
length = -ENOMEM;
- scon = kmalloc(size+1, GFP_KERNEL);
+ scon = kzalloc(size+1, GFP_KERNEL);
if (!scon)
return length;
- memset(scon, 0, size+1);
- tcon = kmalloc(size+1, GFP_KERNEL);
+ tcon = kzalloc(size+1, GFP_KERNEL);
if (!tcon)
goto out;
- memset(tcon, 0, size+1);
length = -EINVAL;
if (sscanf(buf, "%s %s %hu", scon, tcon, &tclass) != 3)
@@ -739,7 +729,7 @@
if (!filep->f_op)
goto out;
- if (count < 0 || count > PAGE_SIZE) {
+ if (count > PAGE_SIZE) {
ret = -EINVAL;
goto out;
}
@@ -800,7 +790,7 @@
if (!filep->f_op)
goto out;
- if (count < 0 || count >= PAGE_SIZE) {
+ if (count >= PAGE_SIZE) {
length = -ENOMEM;
goto out;
}
@@ -858,7 +848,7 @@
if (!filep->f_op)
goto out;
- if (count < 0 || count >= PAGE_SIZE) {
+ if (count >= PAGE_SIZE) {
length = -ENOMEM;
goto out;
}
@@ -924,7 +914,7 @@
file_list_lock();
list_for_each(p, &sb->s_files) {
- struct file * filp = list_entry(p, struct file, f_list);
+ struct file * filp = list_entry(p, struct file, f_u.fu_list);
struct dentry * dentry = filp->f_dentry;
if (dentry->d_parent != de) {
@@ -1032,7 +1022,7 @@
ssize_t ret;
int new_value;
- if (count < 0 || count >= PAGE_SIZE) {
+ if (count >= PAGE_SIZE) {
ret = -ENOMEM;
goto out;
}
diff --git a/security/selinux/ss/conditional.c b/security/selinux/ss/conditional.c
index daf2880..d2737ed 100644
--- a/security/selinux/ss/conditional.c
+++ b/security/selinux/ss/conditional.c
@@ -220,10 +220,9 @@
u32 len;
int rc;
- booldatum = kmalloc(sizeof(struct cond_bool_datum), GFP_KERNEL);
+ booldatum = kzalloc(sizeof(struct cond_bool_datum), GFP_KERNEL);
if (!booldatum)
return -1;
- memset(booldatum, 0, sizeof(struct cond_bool_datum));
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0)
@@ -321,10 +320,9 @@
goto err;
}
- list = kmalloc(sizeof(struct cond_av_list), GFP_KERNEL);
+ list = kzalloc(sizeof(struct cond_av_list), GFP_KERNEL);
if (!list)
goto err;
- memset(list, 0, sizeof(*list));
list->node = node_ptr;
if (!data->head)
@@ -414,11 +412,10 @@
if (rc < 0)
goto err;
- expr = kmalloc(sizeof(struct cond_expr), GFP_KERNEL);
+ expr = kzalloc(sizeof(struct cond_expr), GFP_KERNEL);
if (!expr) {
goto err;
}
- memset(expr, 0, sizeof(struct cond_expr));
expr->expr_type = le32_to_cpu(buf[0]);
expr->bool = le32_to_cpu(buf[1]);
@@ -460,10 +457,9 @@
len = le32_to_cpu(buf[0]);
for (i = 0; i < len; i++) {
- node = kmalloc(sizeof(struct cond_node), GFP_KERNEL);
+ node = kzalloc(sizeof(struct cond_node), GFP_KERNEL);
if (!node)
goto err;
- memset(node, 0, sizeof(struct cond_node));
if (cond_read_node(p, node, fp) != 0)
goto err;
diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c
index d515154..47024a6 100644
--- a/security/selinux/ss/ebitmap.c
+++ b/security/selinux/ss/ebitmap.c
@@ -39,12 +39,11 @@
n = src->node;
prev = NULL;
while (n) {
- new = kmalloc(sizeof(*new), GFP_ATOMIC);
+ new = kzalloc(sizeof(*new), GFP_ATOMIC);
if (!new) {
ebitmap_destroy(dst);
return -ENOMEM;
}
- memset(new, 0, sizeof(*new));
new->startbit = n->startbit;
new->map = n->map;
new->next = NULL;
@@ -150,10 +149,9 @@
if (!value)
return 0;
- new = kmalloc(sizeof(*new), GFP_ATOMIC);
+ new = kzalloc(sizeof(*new), GFP_ATOMIC);
if (!new)
return -ENOMEM;
- memset(new, 0, sizeof(*new));
new->startbit = bit & ~(MAPSIZE - 1);
new->map = (MAPBIT << (bit - new->startbit));
@@ -232,13 +230,12 @@
printk(KERN_ERR "security: ebitmap: truncated map\n");
goto bad;
}
- n = kmalloc(sizeof(*n), GFP_KERNEL);
+ n = kzalloc(sizeof(*n), GFP_KERNEL);
if (!n) {
printk(KERN_ERR "security: ebitmap: out of memory\n");
rc = -ENOMEM;
goto bad;
}
- memset(n, 0, sizeof(*n));
n->startbit = le32_to_cpu(buf[0]);
diff --git a/security/selinux/ss/hashtab.c b/security/selinux/ss/hashtab.c
index 26661fc..24e5ec9 100644
--- a/security/selinux/ss/hashtab.c
+++ b/security/selinux/ss/hashtab.c
@@ -15,11 +15,10 @@
struct hashtab *p;
u32 i;
- p = kmalloc(sizeof(*p), GFP_KERNEL);
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
if (p == NULL)
return p;
- memset(p, 0, sizeof(*p));
p->size = size;
p->nel = 0;
p->hash_value = hash_value;
@@ -55,10 +54,9 @@
if (cur && (h->keycmp(h, key, cur->key) == 0))
return -EEXIST;
- newnode = kmalloc(sizeof(*newnode), GFP_KERNEL);
+ newnode = kzalloc(sizeof(*newnode), GFP_KERNEL);
if (newnode == NULL)
return -ENOMEM;
- memset(newnode, 0, sizeof(*newnode));
newnode->key = key;
newnode->datum = datum;
if (prev) {
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index 8e6262d..2f5f539 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -121,12 +121,11 @@
int rc;
struct role_datum *role;
- role = kmalloc(sizeof(*role), GFP_KERNEL);
+ role = kzalloc(sizeof(*role), GFP_KERNEL);
if (!role) {
rc = -ENOMEM;
goto out;
}
- memset(role, 0, sizeof(*role));
role->value = ++p->p_roles.nprim;
if (role->value != OBJECT_R_VAL) {
rc = -EINVAL;
@@ -851,12 +850,11 @@
__le32 buf[2];
u32 len;
- perdatum = kmalloc(sizeof(*perdatum), GFP_KERNEL);
+ perdatum = kzalloc(sizeof(*perdatum), GFP_KERNEL);
if (!perdatum) {
rc = -ENOMEM;
goto out;
}
- memset(perdatum, 0, sizeof(*perdatum));
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0)
@@ -893,12 +891,11 @@
u32 len, nel;
int i, rc;
- comdatum = kmalloc(sizeof(*comdatum), GFP_KERNEL);
+ comdatum = kzalloc(sizeof(*comdatum), GFP_KERNEL);
if (!comdatum) {
rc = -ENOMEM;
goto out;
}
- memset(comdatum, 0, sizeof(*comdatum));
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0)
@@ -950,10 +947,9 @@
lc = NULL;
for (i = 0; i < ncons; i++) {
- c = kmalloc(sizeof(*c), GFP_KERNEL);
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
if (!c)
return -ENOMEM;
- memset(c, 0, sizeof(*c));
if (lc) {
lc->next = c;
@@ -969,10 +965,9 @@
le = NULL;
depth = -1;
for (j = 0; j < nexpr; j++) {
- e = kmalloc(sizeof(*e), GFP_KERNEL);
+ e = kzalloc(sizeof(*e), GFP_KERNEL);
if (!e)
return -ENOMEM;
- memset(e, 0, sizeof(*e));
if (le) {
le->next = e;
@@ -1033,12 +1028,11 @@
u32 len, len2, ncons, nel;
int i, rc;
- cladatum = kmalloc(sizeof(*cladatum), GFP_KERNEL);
+ cladatum = kzalloc(sizeof(*cladatum), GFP_KERNEL);
if (!cladatum) {
rc = -ENOMEM;
goto out;
}
- memset(cladatum, 0, sizeof(*cladatum));
rc = next_entry(buf, fp, sizeof(u32)*6);
if (rc < 0)
@@ -1127,12 +1121,11 @@
__le32 buf[2];
u32 len;
- role = kmalloc(sizeof(*role), GFP_KERNEL);
+ role = kzalloc(sizeof(*role), GFP_KERNEL);
if (!role) {
rc = -ENOMEM;
goto out;
}
- memset(role, 0, sizeof(*role));
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0)
@@ -1188,12 +1181,11 @@
__le32 buf[3];
u32 len;
- typdatum = kmalloc(sizeof(*typdatum),GFP_KERNEL);
+ typdatum = kzalloc(sizeof(*typdatum),GFP_KERNEL);
if (!typdatum) {
rc = -ENOMEM;
return rc;
}
- memset(typdatum, 0, sizeof(*typdatum));
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0)
@@ -1261,12 +1253,11 @@
__le32 buf[2];
u32 len;
- usrdatum = kmalloc(sizeof(*usrdatum), GFP_KERNEL);
+ usrdatum = kzalloc(sizeof(*usrdatum), GFP_KERNEL);
if (!usrdatum) {
rc = -ENOMEM;
goto out;
}
- memset(usrdatum, 0, sizeof(*usrdatum));
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0)
@@ -1316,12 +1307,11 @@
__le32 buf[2];
u32 len;
- levdatum = kmalloc(sizeof(*levdatum), GFP_ATOMIC);
+ levdatum = kzalloc(sizeof(*levdatum), GFP_ATOMIC);
if (!levdatum) {
rc = -ENOMEM;
goto out;
}
- memset(levdatum, 0, sizeof(*levdatum));
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0)
@@ -1368,12 +1358,11 @@
__le32 buf[3];
u32 len;
- catdatum = kmalloc(sizeof(*catdatum), GFP_ATOMIC);
+ catdatum = kzalloc(sizeof(*catdatum), GFP_ATOMIC);
if (!catdatum) {
rc = -ENOMEM;
goto out;
}
- memset(catdatum, 0, sizeof(*catdatum));
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0)
@@ -1567,12 +1556,11 @@
nel = le32_to_cpu(buf[0]);
ltr = NULL;
for (i = 0; i < nel; i++) {
- tr = kmalloc(sizeof(*tr), GFP_KERNEL);
+ tr = kzalloc(sizeof(*tr), GFP_KERNEL);
if (!tr) {
rc = -ENOMEM;
goto bad;
}
- memset(tr, 0, sizeof(*tr));
if (ltr) {
ltr->next = tr;
} else {
@@ -1593,12 +1581,11 @@
nel = le32_to_cpu(buf[0]);
lra = NULL;
for (i = 0; i < nel; i++) {
- ra = kmalloc(sizeof(*ra), GFP_KERNEL);
+ ra = kzalloc(sizeof(*ra), GFP_KERNEL);
if (!ra) {
rc = -ENOMEM;
goto bad;
}
- memset(ra, 0, sizeof(*ra));
if (lra) {
lra->next = ra;
} else {
@@ -1627,12 +1614,11 @@
nel = le32_to_cpu(buf[0]);
l = NULL;
for (j = 0; j < nel; j++) {
- c = kmalloc(sizeof(*c), GFP_KERNEL);
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
if (!c) {
rc = -ENOMEM;
goto bad;
}
- memset(c, 0, sizeof(*c));
if (l) {
l->next = c;
} else {
@@ -1743,12 +1729,11 @@
if (rc < 0)
goto bad;
len = le32_to_cpu(buf[0]);
- newgenfs = kmalloc(sizeof(*newgenfs), GFP_KERNEL);
+ newgenfs = kzalloc(sizeof(*newgenfs), GFP_KERNEL);
if (!newgenfs) {
rc = -ENOMEM;
goto bad;
}
- memset(newgenfs, 0, sizeof(*newgenfs));
newgenfs->fstype = kmalloc(len + 1,GFP_KERNEL);
if (!newgenfs->fstype) {
@@ -1790,12 +1775,11 @@
goto bad;
len = le32_to_cpu(buf[0]);
- newc = kmalloc(sizeof(*newc), GFP_KERNEL);
+ newc = kzalloc(sizeof(*newc), GFP_KERNEL);
if (!newc) {
rc = -ENOMEM;
goto bad;
}
- memset(newc, 0, sizeof(*newc));
newc->u.name = kmalloc(len + 1,GFP_KERNEL);
if (!newc->u.name) {
@@ -1843,12 +1827,11 @@
nel = le32_to_cpu(buf[0]);
lrt = NULL;
for (i = 0; i < nel; i++) {
- rt = kmalloc(sizeof(*rt), GFP_KERNEL);
+ rt = kzalloc(sizeof(*rt), GFP_KERNEL);
if (!rt) {
rc = -ENOMEM;
goto bad;
}
- memset(rt, 0, sizeof(*rt));
if (lrt)
lrt->next = rt;
else
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index aecdded..44eb4d7 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -1531,12 +1531,11 @@
}
usercon.user = user->value;
- mysids = kmalloc(maxnel*sizeof(*mysids), GFP_ATOMIC);
+ mysids = kcalloc(maxnel, sizeof(*mysids), GFP_ATOMIC);
if (!mysids) {
rc = -ENOMEM;
goto out_unlock;
}
- memset(mysids, 0, maxnel*sizeof(*mysids));
ebitmap_for_each_bit(&user->roles, rnode, i) {
if (!ebitmap_node_get_bit(rnode, i))
@@ -1566,13 +1565,12 @@
mysids[mynel++] = sid;
} else {
maxnel += SIDS_NEL;
- mysids2 = kmalloc(maxnel*sizeof(*mysids2), GFP_ATOMIC);
+ mysids2 = kcalloc(maxnel, sizeof(*mysids2), GFP_ATOMIC);
if (!mysids2) {
rc = -ENOMEM;
kfree(mysids);
goto out_unlock;
}
- memset(mysids2, 0, maxnel*sizeof(*mysids2));
memcpy(mysids2, mysids, mynel * sizeof(*mysids2));
kfree(mysids);
mysids = mysids2;
@@ -1714,12 +1712,11 @@
goto out;
}
- *names = (char**)kmalloc(sizeof(char*) * *len, GFP_ATOMIC);
+ *names = (char**)kcalloc(*len, sizeof(char*), GFP_ATOMIC);
if (!*names)
goto err;
- memset(*names, 0, sizeof(char*) * *len);
- *values = (int*)kmalloc(sizeof(int) * *len, GFP_ATOMIC);
+ *values = (int*)kcalloc(*len, sizeof(int), GFP_ATOMIC);
if (!*values)
goto err;
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index b2d5db2..559ead6 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -20,6 +20,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <sound/driver.h>
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 38b20ef..877bb00 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -275,23 +275,23 @@
return 0;
}
-static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state)
{
snd_card_t *card = dev_get_drvdata(_dev);
int ret = 0;
- if (card && level == SUSPEND_DISABLE)
+ if (card)
ret = pxa2xx_ac97_do_suspend(card, PMSG_SUSPEND);
return ret;
}
-static int pxa2xx_ac97_resume(struct device *_dev, u32 level)
+static int pxa2xx_ac97_resume(struct device *_dev)
{
snd_card_t *card = dev_get_drvdata(_dev);
int ret = 0;
- if (card && level == RESUME_ENABLE)
+ if (card)
ret = pxa2xx_ac97_do_resume(card);
return ret;
diff --git a/sound/core/init.c b/sound/core/init.c
index c72a791..59202de 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -676,8 +676,8 @@
#define SND_GENERIC_NAME "snd_generic"
#ifdef CONFIG_PM
-static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level);
-static int snd_generic_resume(struct device *dev, u32 level);
+static int snd_generic_suspend(struct device *dev, pm_message_t state);
+static int snd_generic_resume(struct device *dev);
#endif
/* initialized in sound.c */
@@ -818,13 +818,10 @@
#ifdef CONFIG_SND_GENERIC_DRIVER
/* suspend/resume callbacks for snd_generic platform device */
-static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level)
+static int snd_generic_suspend(struct device *dev, pm_message_t state)
{
snd_card_t *card;
- if (level != SUSPEND_DISABLE)
- return 0;
-
card = get_snd_generic_card(dev);
if (card->power_state == SNDRV_CTL_POWER_D3hot)
return 0;
@@ -834,13 +831,10 @@
return 0;
}
-static int snd_generic_resume(struct device *dev, u32 level)
+static int snd_generic_resume(struct device *dev)
{
snd_card_t *card;
- if (level != RESUME_ENABLE)
- return 0;
-
card = get_snd_generic_card(dev);
if (card->power_state == SNDRV_CTL_POWER_D0)
return 0;
diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c
index e72cec7..129abab 100644
--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -190,7 +190,7 @@
*
* Returns the pointer of the buffer, or NULL if no enoguh memory.
*/
-void *snd_malloc_pages(size_t size, unsigned int gfp_flags)
+void *snd_malloc_pages(size_t size, gfp_t gfp_flags)
{
int pg;
void *res;
@@ -235,7 +235,7 @@
{
int pg;
void *res;
- unsigned int gfp_flags;
+ gfp_t gfp_flags;
snd_assert(size > 0, return NULL);
snd_assert(dma != NULL, return NULL);
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 67abeba..e97b2d1 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -2949,8 +2949,7 @@
return NOPAGE_OOM;
runtime = substream->runtime;
page = virt_to_page(runtime->status);
- if (!PageReserved(page))
- get_page(page);
+ get_page(page);
if (type)
*type = VM_FAULT_MINOR;
return page;
@@ -2992,8 +2991,7 @@
return NOPAGE_OOM;
runtime = substream->runtime;
page = virt_to_page(runtime->control);
- if (!PageReserved(page))
- get_page(page);
+ get_page(page);
if (type)
*type = VM_FAULT_MINOR;
return page;
@@ -3066,8 +3064,7 @@
vaddr = runtime->dma_area + offset;
page = virt_to_page(vaddr);
}
- if (!PageReserved(page))
- get_page(page);
+ get_page(page);
if (type)
*type = VM_FAULT_MINOR;
return page;
diff --git a/sound/core/seq/instr/ainstr_gf1.c b/sound/core/seq/instr/ainstr_gf1.c
index 207c2c5..0e4df88 100644
--- a/sound/core/seq/instr/ainstr_gf1.c
+++ b/sound/core/seq/instr/ainstr_gf1.c
@@ -51,7 +51,7 @@
gf1_wave_t *wp, *prev;
gf1_xwave_t xp;
int err;
- unsigned int gfp_mask;
+ gfp_t gfp_mask;
unsigned int real_size;
gfp_mask = atomic ? GFP_ATOMIC : GFP_KERNEL;
@@ -144,7 +144,8 @@
snd_gf1_ops_t *ops = (snd_gf1_ops_t *)private_data;
gf1_instrument_t *ip;
gf1_xinstrument_t ix;
- int err, gfp_mask;
+ int err;
+ gfp_t gfp_mask;
if (cmd != SNDRV_SEQ_INSTR_PUT_CMD_CREATE)
return -EINVAL;
diff --git a/sound/core/seq/instr/ainstr_iw.c b/sound/core/seq/instr/ainstr_iw.c
index 67c24c8..7c19fbb 100644
--- a/sound/core/seq/instr/ainstr_iw.c
+++ b/sound/core/seq/instr/ainstr_iw.c
@@ -129,7 +129,7 @@
iwffff_wave_t *wp, *prev;
iwffff_xwave_t xp;
int err;
- unsigned int gfp_mask;
+ gfp_t gfp_mask;
unsigned int real_size;
gfp_mask = atomic ? GFP_ATOMIC : GFP_KERNEL;
@@ -236,7 +236,7 @@
iwffff_layer_t *lp, *prev_lp;
iwffff_xlayer_t lx;
int err;
- unsigned int gfp_mask;
+ gfp_t gfp_mask;
if (cmd != SNDRV_SEQ_INSTR_PUT_CMD_CREATE)
return -EINVAL;
diff --git a/sound/core/seq/instr/ainstr_simple.c b/sound/core/seq/instr/ainstr_simple.c
index 6183d21..17ab94e 100644
--- a/sound/core/seq/instr/ainstr_simple.c
+++ b/sound/core/seq/instr/ainstr_simple.c
@@ -57,7 +57,8 @@
snd_simple_ops_t *ops = (snd_simple_ops_t *)private_data;
simple_instrument_t *ip;
simple_xinstrument_t ix;
- int err, gfp_mask;
+ int err;
+ gfp_t gfp_mask;
unsigned int real_size;
if (cmd != SNDRV_SEQ_INSTR_PUT_CMD_CREATE)
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 9e76bdd..b57519a 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -231,7 +231,7 @@
devfs_mk_cdev(MKDEV(major, minor), S_IFCHR | device_mode, "snd/%s", name);
if (card)
device = card->dev;
- class_device_create(sound_class, MKDEV(major, minor), device, "%s", name);
+ class_device_create(sound_class, NULL, MKDEV(major, minor), device, "%s", name);
up(&sound_mutex);
return 0;
diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
index 3ecef46..fd25aca 100644
--- a/sound/oss/ac97_codec.c
+++ b/sound/oss/ac97_codec.c
@@ -55,6 +55,7 @@
#include <linux/pci.h>
#include <linux/ac97_codec.h>
#include <asm/uaccess.h>
+#include <asm/semaphore.h>
#define CODEC_ID_BUFSZ 14
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
index a78e48d..6b46a8a 100644
--- a/sound/oss/au1550_ac97.c
+++ b/sound/oss/au1550_ac97.c
@@ -35,7 +35,6 @@
#undef DEBUG
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/ioport.h>
diff --git a/sound/oss/awe_wave.c b/sound/oss/awe_wave.c
index d2b9bed..b3ea719 100644
--- a/sound/oss/awe_wave.c
+++ b/sound/oss/awe_wave.c
@@ -6062,7 +6062,7 @@
io1 = pnp_port_start(dev,0);
io2 = pnp_port_start(dev,1);
io3 = pnp_port_start(dev,2);
- printk(KERN_INFO "AWE32: A PnP Wave Table was detected at IO's %#x,%#x,%#x\n.",
+ printk(KERN_INFO "AWE32: A PnP Wave Table was detected at IO's %#x,%#x,%#x.\n",
io1, io2, io3);
setup_ports(io1, io2, io3);
diff --git a/sound/oss/cs4232.c b/sound/oss/cs4232.c
index 6ec308f..7c59e2d 100644
--- a/sound/oss/cs4232.c
+++ b/sound/oss/cs4232.c
@@ -195,10 +195,12 @@
CS_OUT2(0x15, 0x00); /* Select logical device 0 (WSS/SB/FM) */
CS_OUT3(0x47, (base >> 8) & 0xff, base & 0xff); /* WSS base */
- if (check_region(0x388, 4)) /* Not free */
+ if (!request_region(0x388, 4, "FM")) /* Not free */
CS_OUT3(0x48, 0x00, 0x00) /* FM base off */
- else
+ else {
+ release_region(0x388, 4);
CS_OUT3(0x48, 0x03, 0x88); /* FM base 0x388 */
+ }
CS_OUT3(0x42, 0x00, 0x00); /* SB base off */
CS_OUT2(0x22, irq); /* SB+WSS IRQ */
diff --git a/sound/oss/dmasound/dmasound.h b/sound/oss/dmasound/dmasound.h
index 9a2f50f..222014c 100644
--- a/sound/oss/dmasound/dmasound.h
+++ b/sound/oss/dmasound/dmasound.h
@@ -116,7 +116,7 @@
const char *name;
const char *name2;
struct module *owner;
- void *(*dma_alloc)(unsigned int, int);
+ void *(*dma_alloc)(unsigned int, gfp_t);
void (*dma_free)(void *, unsigned int);
int (*irqinit)(void);
#ifdef MODULE
diff --git a/sound/oss/dmasound/dmasound_atari.c b/sound/oss/dmasound/dmasound_atari.c
index 8daaf87..59eb53f 100644
--- a/sound/oss/dmasound/dmasound_atari.c
+++ b/sound/oss/dmasound/dmasound_atari.c
@@ -114,7 +114,7 @@
/*** Low level stuff *********************************************************/
-static void *AtaAlloc(unsigned int size, int flags);
+static void *AtaAlloc(unsigned int size, gfp_t flags);
static void AtaFree(void *, unsigned int size);
static int AtaIrqInit(void);
#ifdef MODULE
@@ -810,7 +810,7 @@
* Atari (TT/Falcon)
*/
-static void *AtaAlloc(unsigned int size, int flags)
+static void *AtaAlloc(unsigned int size, gfp_t flags)
{
return atari_stram_alloc(size, "dmasound");
}
diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
index 2ceb46f..b2bf8ba 100644
--- a/sound/oss/dmasound/dmasound_awacs.c
+++ b/sound/oss/dmasound/dmasound_awacs.c
@@ -271,7 +271,7 @@
/*** Low level stuff *********************************************************/
-static void *PMacAlloc(unsigned int size, int flags);
+static void *PMacAlloc(unsigned int size, gfp_t flags);
static void PMacFree(void *ptr, unsigned int size);
static int PMacIrqInit(void);
#ifdef MODULE
@@ -614,7 +614,7 @@
/*
* PCI PowerMac, with AWACS, Screamer, Burgundy, DACA or Tumbler and DBDMA.
*/
-static void *PMacAlloc(unsigned int size, int flags)
+static void *PMacAlloc(unsigned int size, gfp_t flags)
{
return kmalloc(size, flags);
}
diff --git a/sound/oss/dmasound/dmasound_paula.c b/sound/oss/dmasound/dmasound_paula.c
index 558db53..d59f60b 100644
--- a/sound/oss/dmasound/dmasound_paula.c
+++ b/sound/oss/dmasound/dmasound_paula.c
@@ -69,7 +69,7 @@
/*** Low level stuff *********************************************************/
-static void *AmiAlloc(unsigned int size, int flags);
+static void *AmiAlloc(unsigned int size, gfp_t flags);
static void AmiFree(void *obj, unsigned int size);
static int AmiIrqInit(void);
#ifdef MODULE
@@ -317,7 +317,7 @@
enable_heartbeat();
}
-static void *AmiAlloc(unsigned int size, int flags)
+static void *AmiAlloc(unsigned int size, gfp_t flags)
{
return amiga_chip_alloc((long)size, "dmasound [Paula]");
}
diff --git a/sound/oss/dmasound/dmasound_q40.c b/sound/oss/dmasound/dmasound_q40.c
index 92c25a0..1ddaa62 100644
--- a/sound/oss/dmasound/dmasound_q40.c
+++ b/sound/oss/dmasound/dmasound_q40.c
@@ -36,7 +36,7 @@
/*** Low level stuff *********************************************************/
-static void *Q40Alloc(unsigned int size, int flags);
+static void *Q40Alloc(unsigned int size, gfp_t flags);
static void Q40Free(void *, unsigned int);
static int Q40IrqInit(void);
#ifdef MODULE
@@ -358,7 +358,7 @@
/*** Low level stuff *********************************************************/
-static void *Q40Alloc(unsigned int size, int flags)
+static void *Q40Alloc(unsigned int size, gfp_t flags)
{
return kmalloc(size, flags); /* change to vmalloc */
}
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index 95fa81e..d33bb46 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -567,7 +567,7 @@
devfs_mk_cdev(MKDEV(SOUND_MAJOR, dev_list[i].minor),
S_IFCHR | dev_list[i].mode,
"sound/%s", dev_list[i].name);
- class_device_create(sound_class,
+ class_device_create(sound_class, NULL,
MKDEV(SOUND_MAJOR, dev_list[i].minor),
NULL, "%s", dev_list[i].name);
@@ -579,7 +579,7 @@
dev_list[i].minor + (j*0x10)),
S_IFCHR | dev_list[i].mode,
"sound/%s%d", dev_list[i].name, j);
- class_device_create(sound_class,
+ class_device_create(sound_class, NULL,
MKDEV(SOUND_MAJOR, dev_list[i].minor + (j*0x10)),
NULL, "%s%d", dev_list[i].name, j);
}
diff --git a/sound/oss/wavfront.c b/sound/oss/wavfront.c
index b92ba89..b1a4eeb 100644
--- a/sound/oss/wavfront.c
+++ b/sound/oss/wavfront.c
@@ -2434,7 +2434,7 @@
consumes 16.
*/
- if (check_region (io_base, 16)) {
+ if (!request_region (io_base, 16, "wavfront")) {
printk (KERN_ERR LOGNAME "IO address range 0x%x - 0x%x "
"already in use - ignored\n", dev.base,
dev.base+15);
@@ -2466,10 +2466,13 @@
} else {
printk (KERN_WARNING LOGNAME "not raw, but no "
"hardware version!\n");
+ release_region (io_base, 16);
return 0;
}
if (!wf_raw) {
+ /* will re-acquire region in install_wavefront() */
+ release_region (io_base, 16);
return 1;
} else {
printk (KERN_INFO LOGNAME
@@ -2489,6 +2492,7 @@
if (wavefront_hw_reset ()) {
printk (KERN_WARNING LOGNAME "hardware reset failed\n");
+ release_region (io_base, 16);
return 0;
}
@@ -2496,6 +2500,8 @@
dev.has_fx = (detect_wffx () == 0);
+ /* will re-acquire region in install_wavefront() */
+ release_region (io_base, 16);
return 1;
}
@@ -2804,17 +2810,27 @@
}
static int __init install_wavefront (void)
-
{
+ if (!request_region (dev.base+2, 6, "wavefront synth"))
+ return -1;
+
+ if (dev.has_fx) {
+ if (!request_region (dev.base+8, 8, "wavefront fx")) {
+ release_region (dev.base+2, 6);
+ return -1;
+ }
+ }
+
if ((dev.synth_dev = register_sound_synth (&wavefront_fops, -1)) < 0) {
printk (KERN_ERR LOGNAME "cannot register raw synth\n");
- return -1;
+ goto err_out;
}
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
if ((dev.oss_dev = sound_alloc_synthdev()) == -1) {
printk (KERN_ERR LOGNAME "Too many sequencers\n");
- return -1;
+ /* FIXME: leak: should unregister sound synth */
+ goto err_out;
} else {
synth_devs[dev.oss_dev] = &wavefront_operations;
}
@@ -2827,20 +2843,20 @@
sound_unload_synthdev (dev.oss_dev);
#endif /* OSS_SUPPORT_SEQ */
- return -1;
+ goto err_out;
}
- request_region (dev.base+2, 6, "wavefront synth");
-
- if (dev.has_fx) {
- request_region (dev.base+8, 8, "wavefront fx");
- }
-
if (wavefront_config_midi ()) {
printk (KERN_WARNING LOGNAME "could not initialize MIDI.\n");
}
return dev.oss_dev;
+
+err_out:
+ release_region (dev.base+2, 6);
+ if (dev.has_fx)
+ release_region (dev.base+8, 8);
+ return -1;
}
static void __exit uninstall_wavefront (void)
diff --git a/sound/oss/ymfpci.c b/sound/oss/ymfpci.c
index 05203ad..8dae59b 100644
--- a/sound/oss/ymfpci.c
+++ b/sound/oss/ymfpci.c
@@ -107,14 +107,15 @@
*/
static struct pci_device_id ymf_id_tbl[] = {
-#define DEV(v, d, data) \
- { PCI_VENDOR_ID_##v, PCI_DEVICE_ID_##v##_##d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long)data }
- DEV (YAMAHA, 724, "YMF724"),
- DEV (YAMAHA, 724F, "YMF724F"),
- DEV (YAMAHA, 740, "YMF740"),
- DEV (YAMAHA, 740C, "YMF740C"),
- DEV (YAMAHA, 744, "YMF744"),
- DEV (YAMAHA, 754, "YMF754"),
+#define DEV(dev, data) \
+ { PCI_VENDOR_ID_YAMAHA, dev, PCI_ANY_ID, PCI_ANY_ID, 0, 0, \
+ (unsigned long)data }
+ DEV (PCI_DEVICE_ID_YAMAHA_724, "YMF724"),
+ DEV (PCI_DEVICE_ID_YAMAHA_724F, "YMF724F"),
+ DEV (PCI_DEVICE_ID_YAMAHA_740, "YMF740"),
+ DEV (PCI_DEVICE_ID_YAMAHA_740C, "YMF740C"),
+ DEV (PCI_DEVICE_ID_YAMAHA_744, "YMF744"),
+ DEV (PCI_DEVICE_ID_YAMAHA_754, "YMF754"),
#undef DEV
{ }
};
diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c
index f560dd8..d833349 100644
--- a/sound/parisc/harmony.c
+++ b/sound/parisc/harmony.c
@@ -197,7 +197,7 @@
spin_unlock(&h->lock);
if (dstatus & HARMONY_DSTATUS_PN) {
- if (h->psubs) {
+ if (h->psubs && h->st.playing) {
spin_lock(&h->lock);
h->pbuf.buf += h->pbuf.count; /* PAGE_SIZE */
h->pbuf.buf %= h->pbuf.size; /* MAX_BUFS*PAGE_SIZE */
@@ -216,7 +216,7 @@
}
if (dstatus & HARMONY_DSTATUS_RN) {
- if (h->csubs) {
+ if (h->csubs && h->st.capturing) {
spin_lock(&h->lock);
h->cbuf.buf += h->cbuf.count;
h->cbuf.buf %= h->cbuf.size;
@@ -316,6 +316,7 @@
case SNDRV_PCM_TRIGGER_STOP:
h->st.playing = 0;
harmony_mute(h);
+ harmony_write(h, HARMONY_PNXTADD, h->sdma.addr);
harmony_disable_interrupts(h);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -351,8 +352,9 @@
break;
case SNDRV_PCM_TRIGGER_STOP:
h->st.capturing = 0;
- harmony_mute(h);
- harmony_disable_interrupts(h);
+ harmony_mute(h);
+ harmony_write(h, HARMONY_RNXTADD, h->gdma.addr);
+ harmony_disable_interrupts(h);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
@@ -408,7 +410,8 @@
h->pbuf.size = snd_pcm_lib_buffer_bytes(ss);
h->pbuf.count = snd_pcm_lib_period_bytes(ss);
- h->pbuf.buf = 0;
+ if (h->pbuf.buf >= h->pbuf.size)
+ h->pbuf.buf = 0;
h->st.playing = 0;
h->st.rate = snd_harmony_rate_bits(rt->rate);
@@ -437,7 +440,8 @@
h->cbuf.size = snd_pcm_lib_buffer_bytes(ss);
h->cbuf.count = snd_pcm_lib_period_bytes(ss);
- h->cbuf.buf = 0;
+ if (h->cbuf.buf >= h->cbuf.size)
+ h->cbuf.buf = 0;
h->st.capturing = 0;
h->st.rate = snd_harmony_rate_bits(rt->rate);
@@ -712,13 +716,14 @@
left = (h->st.gain >> shift_left) & mask;
right = (h->st.gain >> shift_right) & mask;
-
if (invert) {
left = mask - left;
right = mask - right;
}
+
ucontrol->value.integer.value[0] = left;
- ucontrol->value.integer.value[1] = right;
+ if (shift_left != shift_right)
+ ucontrol->value.integer.value[1] = right;
spin_unlock_irqrestore(&h->mixer_lock, flags);
@@ -738,22 +743,82 @@
int old_gain = h->st.gain;
unsigned long flags;
- left = ucontrol->value.integer.value[0] & mask;
- right = ucontrol->value.integer.value[1] & mask;
- if (invert) {
- left = mask - left;
- right = mask - right;
- }
-
spin_lock_irqsave(&h->mixer_lock, flags);
- h->st.gain &= ~( (mask << shift_right) | (mask << shift_left) );
- h->st.gain |= ( (left << shift_left) | (right << shift_right) );
+ left = ucontrol->value.integer.value[0] & mask;
+ if (invert)
+ left = mask - left;
+ h->st.gain &= ~( (mask << shift_left ) );
+ h->st.gain |= (left << shift_left);
+
+ if (shift_left != shift_right) {
+ right = ucontrol->value.integer.value[1] & mask;
+ if (invert)
+ right = mask - right;
+ h->st.gain &= ~( (mask << shift_right) );
+ h->st.gain |= (right << shift_right);
+ }
+
snd_harmony_set_new_gain(h);
spin_unlock_irqrestore(&h->mixer_lock, flags);
- return (old_gain - h->st.gain);
+ return h->st.gain != old_gain;
+}
+
+static int
+snd_harmony_captureroute_info(snd_kcontrol_t *kc,
+ snd_ctl_elem_info_t *uinfo)
+{
+ static char *texts[2] = { "Line", "Mic" };
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ if (uinfo->value.enumerated.item > 1)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name,
+ texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int
+snd_harmony_captureroute_get(snd_kcontrol_t *kc,
+ snd_ctl_elem_value_t *ucontrol)
+{
+ harmony_t *h = snd_kcontrol_chip(kc);
+ int value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&h->mixer_lock, flags);
+
+ value = (h->st.gain >> HARMONY_GAIN_IS_SHIFT) & 1;
+ ucontrol->value.enumerated.item[0] = value;
+
+ spin_unlock_irqrestore(&h->mixer_lock, flags);
+
+ return 0;
+}
+
+static int
+snd_harmony_captureroute_put(snd_kcontrol_t *kc,
+ snd_ctl_elem_value_t *ucontrol)
+{
+ harmony_t *h = snd_kcontrol_chip(kc);
+ int value;
+ int old_gain = h->st.gain;
+ unsigned long flags;
+
+ spin_lock_irqsave(&h->mixer_lock, flags);
+
+ value = ucontrol->value.enumerated.item[0] & 1;
+ h->st.gain &= ~HARMONY_GAIN_IS_MASK;
+ h->st.gain |= value << HARMONY_GAIN_IS_SHIFT;
+
+ snd_harmony_set_new_gain(h);
+
+ spin_unlock_irqrestore(&h->mixer_lock, flags);
+
+ return h->st.gain != old_gain;
}
#define HARMONY_CONTROLS (sizeof(snd_harmony_controls)/ \
@@ -767,10 +832,25 @@
((mask) << 16) | ((invert) << 24)) }
static snd_kcontrol_new_t snd_harmony_controls[] = {
- HARMONY_VOLUME("Playback Volume", HARMONY_GAIN_LO_SHIFT,
+ HARMONY_VOLUME("Master Playback Volume", HARMONY_GAIN_LO_SHIFT,
HARMONY_GAIN_RO_SHIFT, HARMONY_GAIN_OUT, 1),
HARMONY_VOLUME("Capture Volume", HARMONY_GAIN_LI_SHIFT,
HARMONY_GAIN_RI_SHIFT, HARMONY_GAIN_IN, 0),
+ HARMONY_VOLUME("Monitor Volume", HARMONY_GAIN_MA_SHIFT,
+ HARMONY_GAIN_MA_SHIFT, HARMONY_GAIN_MA, 1),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Input Route",
+ .info = snd_harmony_captureroute_info,
+ .get = snd_harmony_captureroute_get,
+ .put = snd_harmony_captureroute_put
+ },
+ HARMONY_VOLUME("Internal Speaker Switch", HARMONY_GAIN_SE_SHIFT,
+ HARMONY_GAIN_SE_SHIFT, 1, 0),
+ HARMONY_VOLUME("Line-Out Switch", HARMONY_GAIN_LE_SHIFT,
+ HARMONY_GAIN_LE_SHIFT, 1, 0),
+ HARMONY_VOLUME("Headphones Switch", HARMONY_GAIN_HE_SHIFT,
+ HARMONY_GAIN_HE_SHIFT, 1, 0),
};
static void __init
@@ -852,14 +932,14 @@
memset(&h->pbuf, 0, sizeof(h->pbuf));
memset(&h->cbuf, 0, sizeof(h->cbuf));
- h->hpa = padev->hpa;
+ h->hpa = padev->hpa.start;
h->card = card;
h->dev = padev;
h->irq = padev->irq;
- h->iobase = ioremap_nocache(padev->hpa, HARMONY_SIZE);
+ h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE);
if (h->iobase == NULL) {
printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n",
- padev->hpa);
+ padev->hpa.start);
err = -EBUSY;
goto free_and_ret;
}
diff --git a/sound/parisc/harmony.h b/sound/parisc/harmony.h
index ef77f9a..526c523 100644
--- a/sound/parisc/harmony.h
+++ b/sound/parisc/harmony.h
@@ -61,7 +61,7 @@
#define HARMONY_SIZE 64
#define BUF_SIZE PAGE_SIZE
-#define MAX_BUFS 10
+#define MAX_BUFS 16
#define MAX_BUF_SIZE (MAX_BUFS * BUF_SIZE)
#define PLAYBACK_BUFS MAX_BUFS
@@ -101,28 +101,31 @@
#define HARMONY_SS_MONO 0x00000000
#define HARMONY_SS_STEREO 0x00000001
-#define HARMONY_GAIN_SILENCE 0x00F00FFF
-#define HARMONY_GAIN_DEFAULT 0x0FF00000
+#define HARMONY_GAIN_SILENCE 0x01F00FFF
+#define HARMONY_GAIN_DEFAULT 0x01F00FFF
-#define HARMONY_GAIN_HE_SHIFT 27
+#define HARMONY_GAIN_HE_SHIFT 27 /* headphones enabled */
#define HARMONY_GAIN_HE_MASK (1 << HARMONY_GAIN_HE_SHIFT)
-#define HARMONY_GAIN_LE_SHIFT 26
+#define HARMONY_GAIN_LE_SHIFT 26 /* line-out enabled */
#define HARMONY_GAIN_LE_MASK (1 << HARMONY_GAIN_LE_SHIFT)
-#define HARMONY_GAIN_SE_SHIFT 25
+#define HARMONY_GAIN_SE_SHIFT 25 /* internal-speaker enabled */
#define HARMONY_GAIN_SE_MASK (1 << HARMONY_GAIN_SE_SHIFT)
-#define HARMONY_GAIN_IS_SHIFT 24
+#define HARMONY_GAIN_IS_SHIFT 24 /* input select - 0 for line, 1 for mic */
#define HARMONY_GAIN_IS_MASK (1 << HARMONY_GAIN_IS_SHIFT)
+/* monitor attenuation */
#define HARMONY_GAIN_MA 0x0f
#define HARMONY_GAIN_MA_SHIFT 20
#define HARMONY_GAIN_MA_MASK (HARMONY_GAIN_MA << HARMONY_GAIN_MA_SHIFT)
+/* input gain */
#define HARMONY_GAIN_IN 0x0f
#define HARMONY_GAIN_LI_SHIFT 16
#define HARMONY_GAIN_LI_MASK (HARMONY_GAIN_IN << HARMONY_GAIN_LI_SHIFT)
#define HARMONY_GAIN_RI_SHIFT 12
#define HARMONY_GAIN_RI_MASK (HARMONY_GAIN_IN << HARMONY_GAIN_RI_SHIFT)
+/* output gain (master volume) */
#define HARMONY_GAIN_OUT 0x3f
#define HARMONY_GAIN_LO_SHIFT 6
#define HARMONY_GAIN_LO_MASK (HARMONY_GAIN_OUT << HARMONY_GAIN_LO_SHIFT)
diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c
index becbc42..ec70fad 100644
--- a/sound/pci/ac97/ac97_bus.c
+++ b/sound/pci/ac97/ac97_bus.c
@@ -31,7 +31,8 @@
int ret = 0;
if (dev->driver && dev->driver->suspend)
- ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN);
+ ret = dev->driver->suspend(dev, state);
+
return ret;
}
@@ -40,7 +41,8 @@
int ret = 0;
if (dev->driver && dev->driver->resume)
- ret = dev->driver->resume(dev, RESUME_POWER_ON);
+ ret = dev->driver->resume(dev);
+
return ret;
}
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 2236c95..01d98ee 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -761,15 +761,18 @@
#define BT_DEVICE(chip, subvend, subdev, rate) \
{ .vendor = PCI_VENDOR_ID_BROOKTREE, \
- .device = PCI_DEVICE_ID_BROOKTREE_##chip, \
+ .device = chip, \
.subvendor = subvend, .subdevice = subdev, \
.driver_data = rate }
/* driver_data is the default digital_rate value for that device */
static struct pci_device_id snd_bt87x_ids[] = {
- BT_DEVICE(878, 0x0070, 0x13eb, 32000), /* Hauppauge WinTV series */
- BT_DEVICE(879, 0x0070, 0x13eb, 32000), /* Hauppauge WinTV series */
- BT_DEVICE(878, 0x0070, 0xff01, 44100), /* Viewcast Osprey 200 */
+ /* Hauppauge WinTV series */
+ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0x13eb, 32000),
+ /* Hauppauge WinTV series */
+ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_879, 0x0070, 0x13eb, 32000),
+ /* Viewcast Osprey 200 */
+ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0xff01, 44100),
{ }
};
MODULE_DEVICE_TABLE(pci, snd_bt87x_ids);
diff --git a/sound/ppc/beep.c b/sound/ppc/beep.c
index 31ea7a4..1681ee1 100644
--- a/sound/ppc/beep.c
+++ b/sound/ppc/beep.c
@@ -31,14 +31,14 @@
#include "pmac.h"
struct snd_pmac_beep {
- int running; /* boolean */
- int volume; /* mixer volume: 0-100 */
+ int running; /* boolean */
+ int volume; /* mixer volume: 0-100 */
int volume_play; /* currently playing volume */
int hz;
int nsamples;
short *buf; /* allocated wave buffer */
dma_addr_t addr; /* physical address of buffer */
- struct input_dev dev;
+ struct input_dev *dev;
};
/*
@@ -212,47 +212,55 @@
int __init snd_pmac_attach_beep(pmac_t *chip)
{
pmac_beep_t *beep;
- int err;
+ struct input_dev *input_dev;
+ void *dmabuf;
+ int err = -ENOMEM;
- beep = kmalloc(sizeof(*beep), GFP_KERNEL);
- if (! beep)
- return -ENOMEM;
-
- memset(beep, 0, sizeof(*beep));
- beep->buf = dma_alloc_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4,
- &beep->addr, GFP_KERNEL);
-
- beep->dev.evbit[0] = BIT(EV_SND);
- beep->dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
- beep->dev.event = snd_pmac_beep_event;
- beep->dev.private = chip;
+ beep = kzalloc(sizeof(*beep), GFP_KERNEL);
+ dmabuf = dma_alloc_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4,
+ &beep->addr, GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!beep || !dmabuf || !input_dev)
+ goto fail;
/* FIXME: set more better values */
- beep->dev.name = "PowerMac Beep";
- beep->dev.phys = "powermac/beep";
- beep->dev.id.bustype = BUS_ADB;
- beep->dev.id.vendor = 0x001f;
- beep->dev.id.product = 0x0001;
- beep->dev.id.version = 0x0100;
+ input_dev->name = "PowerMac Beep";
+ input_dev->phys = "powermac/beep";
+ input_dev->id.bustype = BUS_ADB;
+ input_dev->id.vendor = 0x001f;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->evbit[0] = BIT(EV_SND);
+ input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ input_dev->event = snd_pmac_beep_event;
+ input_dev->private = chip;
+ input_dev->cdev.dev = &chip->pdev->dev;
+
+ beep->dev = input_dev;
+ beep->buf = dmabuf;
beep->volume = BEEP_VOLUME;
beep->running = 0;
- if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_pmac_beep_mixer, chip))) < 0) {
- kfree(beep->buf);
- kfree(beep);
- return err;
- }
+
+ err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_pmac_beep_mixer, chip));
+ if (err < 0)
+ goto fail;
chip->beep = beep;
- input_register_device(&beep->dev);
+ input_register_device(beep->dev);
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(dmabuf);
+ kfree(beep);
+ return err;
}
void snd_pmac_detach_beep(pmac_t *chip)
{
if (chip->beep) {
- input_unregister_device(&chip->beep->dev);
+ input_unregister_device(chip->beep->dev);
dma_free_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4,
chip->beep->buf, chip->beep->addr);
kfree(chip->beep);
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 954f994..394b53e 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -174,7 +174,7 @@
devfs_mk_cdev(MKDEV(SOUND_MAJOR, s->unit_minor),
S_IFCHR | mode, s->name);
- class_device_create(sound_class, MKDEV(SOUND_MAJOR, s->unit_minor),
+ class_device_create(sound_class, NULL, MKDEV(SOUND_MAJOR, s->unit_minor),
dev, s->name+6);
return r;
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index e0d0365..f1a2e2c 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -163,7 +163,7 @@
/*
* Submits the URB, with error handling.
*/
-static int snd_usbmidi_submit_urb(struct urb* urb, int flags)
+static int snd_usbmidi_submit_urb(struct urb* urb, gfp_t flags)
{
int err = usb_submit_urb(urb, flags);
if (err < 0 && err != -ENODEV)