iwlwifi: do not schedule tasklet when rcv unused irq
The nic controller's scheduler interrupt (CSR_INT_BIT_SCD) indicates
to the driver that scheduler finished to transmit the frame/frames.
This bit is not used and the tasklet should thus not be scheduled upon
its receipt.
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 8cef48c..f644c6b 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4759,8 +4759,9 @@
#ifdef CONFIG_IWL3945_DEBUG
if (iwl3945_debug_level & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_MAC_CLK_ACTV)
- IWL_DEBUG_ISR("Microcode started or stopped.\n");
+ if (inta & CSR_INT_BIT_SCD)
+ IWL_DEBUG_ISR("Scheduler finished to transmit "
+ "the frame/frames.\n");
/* Alive notification via Rx interrupt will do the real work */
if (inta & CSR_INT_BIT_ALIVE)
@@ -4768,7 +4769,7 @@
}
#endif
/* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_MAC_CLK_ACTV | CSR_INT_BIT_ALIVE);
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
/* HW RF KILL switch toggled (4965 only) */
if (inta & CSR_INT_BIT_RF_KILL) {
@@ -4904,8 +4905,11 @@
IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, inta_mask, inta_fh);
+ inta &= ~CSR_INT_BIT_SCD;
+
/* iwl3945_irq_tasklet() will service interrupts and re-enable them */
- tasklet_schedule(&priv->irq_tasklet);
+ if (likely(inta || inta_fh))
+ tasklet_schedule(&priv->irq_tasklet);
unplugged:
spin_unlock(&priv->lock);