ath5k: Remove ATH5K_INI_RFGAIN defines, use band instead
Remove redundant defines.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 18c58cd..b6e9621 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -609,10 +609,10 @@
/* Write initial RF gain table to set the RF sensitivity
* this one works on all RF chips and has nothing to do
* with gain_F calibration */
-static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
+static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
{
const struct ath5k_ini_rfgain *ath5k_rfg;
- unsigned int i, size;
+ unsigned int i, size, index;
switch (ah->ah_radio) {
case AR5K_RF5111:
@@ -644,17 +644,11 @@
return -EINVAL;
}
- switch (freq) {
- case AR5K_INI_RFGAIN_2GHZ:
- case AR5K_INI_RFGAIN_5GHZ:
- break;
- default:
- return -EINVAL;
- }
+ index = (band == IEEE80211_BAND_2GHZ) ? 1 : 0;
for (i = 0; i < size; i++) {
AR5K_REG_WAIT(i);
- ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],
+ ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[index],
(u32)ath5k_rfg[i].rfg_register);
}
@@ -3246,7 +3240,7 @@
\*************/
int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- u8 mode, u8 ee_mode, u8 freq, bool fast)
+ u8 mode, u8 ee_mode, bool fast)
{
struct ieee80211_channel *curr_channel;
int ret, i;
@@ -3305,7 +3299,7 @@
* Write initial RF gain settings
* This should work for both 5111/5112
*/
- ret = ath5k_hw_rfgain_init(ah, freq);
+ ret = ath5k_hw_rfgain_init(ah, channel->band);
if (ret)
return ret;