b43: N-PHY: rev3+: add static tables
This finally makes TX on OFDM rates possible on my dev with PHY rev 4.
We still have lower performance than wl, but at least speeds around 15M
become possible.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 4ec593b..016a480 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -109,6 +109,33 @@
#define B43_NTAB_C1_LOFEEDTH B43_NTAB16(0x1B, 0x1C0) /* Local Oscillator Feed Through Lookup Table Core 1 */
#define B43_NTAB_C1_LOFEEDTH_SIZE 128
+/* Static N-PHY tables, PHY revision >= 3 */
+#define B43_NTAB_FRAMESTRUCT_R3 B43_NTAB32(10, 000) /* frame struct */
+#define B43_NTAB_PILOT_R3 B43_NTAB16(11, 000) /* pilot */
+#define B43_NTAB_TMAP_R3 B43_NTAB32(12, 000) /* TM AP */
+#define B43_NTAB_INTLEVEL_R3 B43_NTAB32(13, 000) /* INT LV */
+#define B43_NTAB_TDTRN_R3 B43_NTAB32(14, 000) /* TD TRN */
+#define B43_NTAB_NOISEVAR0_R3 B43_NTAB32(16, 000) /* noise variance 0 */
+#define B43_NTAB_NOISEVAR1_R3 B43_NTAB32(16, 128) /* noise variance 1 */
+#define B43_NTAB_MCS_R3 B43_NTAB16(18, 000) /* MCS */
+#define B43_NTAB_TDI20A0_R3 B43_NTAB32(19, 128) /* TDI 20/0 */
+#define B43_NTAB_TDI20A1_R3 B43_NTAB32(19, 256) /* TDI 20/1 */
+#define B43_NTAB_TDI40A0_R3 B43_NTAB32(19, 640) /* TDI 40/0 */
+#define B43_NTAB_TDI40A1_R3 B43_NTAB32(19, 768) /* TDI 40/1 */
+#define B43_NTAB_PILOTLT_R3 B43_NTAB32(20, 000) /* PLT lookup */
+#define B43_NTAB_CHANEST_R3 B43_NTAB32(22, 000) /* channel estimate */
+#define B43_NTAB_FRAMELT_R3 B43_NTAB8 (24, 000) /* frame lookup */
+#define B43_NTAB_C0_ESTPLT_R3 B43_NTAB8 (26, 000) /* estimated power lookup 0 */
+#define B43_NTAB_C1_ESTPLT_R3 B43_NTAB8 (27, 000) /* estimated power lookup 1 */
+#define B43_NTAB_C0_ADJPLT_R3 B43_NTAB8 (26, 064) /* adjusted power lookup 0 */
+#define B43_NTAB_C1_ADJPLT_R3 B43_NTAB8 (27, 064) /* adjusted power lookup 1 */
+#define B43_NTAB_C0_GAINCTL_R3 B43_NTAB32(26, 192) /* gain control lookup 0 */
+#define B43_NTAB_C1_GAINCTL_R3 B43_NTAB32(27, 192) /* gain control lookup 1 */
+#define B43_NTAB_C0_IQLT_R3 B43_NTAB32(26, 320) /* I/Q lookup 0 */
+#define B43_NTAB_C1_IQLT_R3 B43_NTAB32(27, 320) /* I/Q lookup 1 */
+#define B43_NTAB_C0_LOFEEDTH_R3 B43_NTAB16(26, 448) /* Local Oscillator Feed Through lookup 0 */
+#define B43_NTAB_C1_LOFEEDTH_R3 B43_NTAB16(27, 448) /* Local Oscillator Feed Through lookup 1 */
+
#define B43_NTAB_TX_IQLO_CAL_LOFT_LADDER_40_SIZE 18
#define B43_NTAB_TX_IQLO_CAL_LOFT_LADDER_20_SIZE 18
#define B43_NTAB_TX_IQLO_CAL_IQIMB_LADDER_40_SIZE 18