ARM: orion: Consolidate the creation of the uart platform data.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index d281b19..310de50 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -34,6 +34,7 @@
#include <plat/orion_nand.h>
#include <plat/orion_wdt.h>
#include <plat/time.h>
+#include <plat/common.h>
#include "common.h"
/*****************************************************************************
@@ -349,91 +350,21 @@
/*****************************************************************************
* UART0
****************************************************************************/
-static struct plat_serial8250_port orion5x_uart0_data[] = {
- {
- .mapbase = UART0_PHYS_BASE,
- .membase = (char *)UART0_VIRT_BASE,
- .irq = IRQ_ORION5X_UART0,
- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 0,
- }, {
- },
-};
-
-static struct resource orion5x_uart0_resources[] = {
- {
- .start = UART0_PHYS_BASE,
- .end = UART0_PHYS_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_ORION5X_UART0,
- .end = IRQ_ORION5X_UART0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device orion5x_uart0 = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = orion5x_uart0_data,
- },
- .resource = orion5x_uart0_resources,
- .num_resources = ARRAY_SIZE(orion5x_uart0_resources),
-};
-
void __init orion5x_uart0_init(void)
{
- platform_device_register(&orion5x_uart0);
+ orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
+ IRQ_ORION5X_UART0, orion5x_tclk);
}
-
/*****************************************************************************
* UART1
****************************************************************************/
-static struct plat_serial8250_port orion5x_uart1_data[] = {
- {
- .mapbase = UART1_PHYS_BASE,
- .membase = (char *)UART1_VIRT_BASE,
- .irq = IRQ_ORION5X_UART1,
- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 0,
- }, {
- },
-};
-
-static struct resource orion5x_uart1_resources[] = {
- {
- .start = UART1_PHYS_BASE,
- .end = UART1_PHYS_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_ORION5X_UART1,
- .end = IRQ_ORION5X_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device orion5x_uart1 = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = orion5x_uart1_data,
- },
- .resource = orion5x_uart1_resources,
- .num_resources = ARRAY_SIZE(orion5x_uart1_resources),
-};
-
void __init orion5x_uart1_init(void)
{
- platform_device_register(&orion5x_uart1);
+ orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
+ IRQ_ORION5X_UART1, orion5x_tclk);
}
-
/*****************************************************************************
* XOR engine
****************************************************************************/
@@ -687,8 +618,6 @@
orion5x_ge00_shared_data.t_clk = orion5x_tclk;
orion5x_spi_plat_data.tclk = orion5x_tclk;
- orion5x_uart0_data[0].uartclk = orion5x_tclk;
- orion5x_uart1_data[0].uartclk = orion5x_tclk;
/*
* Setup Orion address map