ar9170: introduce functions for MAC programming
This patch introduces 3 new function which are used to update
the MAC state, whenever needed... e.g: after a band switch.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index 706262f..d9f1f46 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -38,6 +38,55 @@
#include "ar9170.h"
#include "cmd.h"
+int ar9170_set_dyn_sifs_ack(struct ar9170 *ar)
+{
+ u32 val;
+
+ if (conf_is_ht40(&ar->hw->conf))
+ val = 0x010a;
+ else {
+ if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
+ val = 0x105;
+ else
+ val = 0x104;
+ }
+
+ return ar9170_write_reg(ar, AR9170_MAC_REG_DYNAMIC_SIFS_ACK, val);
+}
+
+int ar9170_set_slot_time(struct ar9170 *ar)
+{
+ u32 slottime = 20;
+
+ if (!ar->vif)
+ return 0;
+
+ if ((ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ) ||
+ ar->vif->bss_conf.use_short_slot)
+ slottime = 9;
+
+ return ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME, slottime << 10);
+}
+
+int ar9170_set_basic_rates(struct ar9170 *ar)
+{
+ u8 cck, ofdm;
+
+ if (!ar->vif)
+ return 0;
+
+ ofdm = ar->vif->bss_conf.basic_rates >> 4;
+
+ /* FIXME: is still necessary? */
+ if (ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ)
+ cck = 0;
+ else
+ cck = ar->vif->bss_conf.basic_rates & 0xf;
+
+ return ar9170_write_reg(ar, AR9170_MAC_REG_BASIC_RATE,
+ ofdm << 8 | cck);
+}
+
int ar9170_set_qos(struct ar9170 *ar)
{
ar9170_regwrite_begin(ar);