Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits)
acer-wmi: support integer return type from WMI methods
msi-laptop: fix section mismatch in reference from the function load_scm_model_init
acer-wmi: support to set communication device state by new wmid method
acer-wmi: allow 64-bits return buffer from WMI methods
acer-wmi: check the existence of internal 3G device when set capability
platform/x86:delete two unused variables
support wlan hotkey on Acer Travelmate 5735Z
platform-x86: intel_mid_thermal: Fix memory leak
platform/x86: Fix Makefile for intel_mid_powerbtn
platform/x86: Simplify intel_mid_powerbtn
acer-wmi: Delete out-of-date documentation
acerhdf: Clean up includes
acerhdf: Drop pointless dependency on THERMAL_HWMON
acer-wmi: Update MAINTAINERS
wmi: Orphan ACPI-WMI driver
tc1100-wmi: Orphan driver
acer-wmi: does not allow negative number set to initial device state
platform/oaktrail: ACPI EC Extra driver for Oaktrail
thinkpad_acpi: Convert printks to pr_<level>
thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning
...
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
deleted file mode 100644
index 4beafa6..0000000
--- a/Documentation/laptops/acer-wmi.txt
+++ /dev/null
@@ -1,184 +0,0 @@
-Acer Laptop WMI Extras Driver
-http://code.google.com/p/aceracpi
-Version 0.3
-4th April 2009
-
-Copyright 2007-2009 Carlos Corbacho <carlos@strangeworlds.co.uk>
-
-acer-wmi is a driver to allow you to control various parts of your Acer laptop
-hardware under Linux which are exposed via ACPI-WMI.
-
-This driver completely replaces the old out-of-tree acer_acpi, which I am
-currently maintaining for bug fixes only on pre-2.6.25 kernels. All development
-work is now focused solely on acer-wmi.
-
-Disclaimer
-**********
-
-Acer and Wistron have provided nothing towards the development acer_acpi or
-acer-wmi. All information we have has been through the efforts of the developers
-and the users to discover as much as possible about the hardware.
-
-As such, I do warn that this could break your hardware - this is extremely
-unlikely of course, but please bear this in mind.
-
-Background
-**********
-
-acer-wmi is derived from acer_acpi, originally developed by Mark
-Smith in 2005, then taken over by Carlos Corbacho in 2007, in order to activate
-the wireless LAN card under a 64-bit version of Linux, as acerhk[1] (the
-previous solution to the problem) relied on making 32 bit BIOS calls which are
-not possible in kernel space from a 64 bit OS.
-
-[1] acerhk: http://www.cakey.de/acerhk/
-
-Supported Hardware
-******************
-
-NOTE: The Acer Aspire One is not supported hardware. It cannot work with
-acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been
-blacklisted until that happens.
-
-Please see the website for the current list of known working hardware:
-
-http://code.google.com/p/aceracpi/wiki/SupportedHardware
-
-If your laptop is not listed, or listed as unknown, and works with acer-wmi,
-please contact me with a copy of the DSDT.
-
-If your Acer laptop doesn't work with acer-wmi, I would also like to see the
-DSDT.
-
-To send me the DSDT, as root/sudo:
-
-cat /sys/firmware/acpi/tables/DSDT > dsdt
-
-And send me the resulting 'dsdt' file.
-
-Usage
-*****
-
-On Acer laptops, acer-wmi should already be autoloaded based on DMI matching.
-For non-Acer laptops, until WMI based autoloading support is added, you will
-need to manually load acer-wmi.
-
-acer-wmi creates /sys/devices/platform/acer-wmi, and fills it with various
-files whose usage is detailed below, which enables you to control some of the
-following (varies between models):
-
-* the wireless LAN card radio
-* inbuilt Bluetooth adapter
-* inbuilt 3G card
-* mail LED of your laptop
-* brightness of the LCD panel
-
-Wireless
-********
-
-With regards to wireless, all acer-wmi does is enable the radio on the card. It
-is not responsible for the wireless LED - once the radio is enabled, this is
-down to the wireless driver for your card. So the behaviour of the wireless LED,
-once you enable the radio, will depend on your hardware and driver combination.
-
-e.g. With the BCM4318 on the Acer Aspire 5020 series:
-
-ndiswrapper: Light blinks on when transmitting
-b43: Solid light, blinks off when transmitting
-
-Wireless radio control is unconditionally enabled - all Acer laptops that support
-acer-wmi come with built-in wireless. However, should you feel so inclined to
-ever wish to remove the card, or swap it out at some point, please get in touch
-with me, as we may well be able to gain some data on wireless card detection.
-
-The wireless radio is exposed through rfkill.
-
-Bluetooth
-*********
-
-For bluetooth, this is an internal USB dongle, so once enabled, you will get
-a USB device connection event, and a new USB device appears. When you disable
-bluetooth, you get the reverse - a USB device disconnect event, followed by the
-device disappearing again.
-
-Bluetooth is autodetected by acer-wmi, so if you do not have a bluetooth module
-installed in your laptop, this file won't exist (please be aware that it is
-quite common for Acer not to fit bluetooth to their laptops - so just because
-you have a bluetooth button on the laptop, doesn't mean that bluetooth is
-installed).
-
-For the adventurously minded - if you want to buy an internal bluetooth
-module off the internet that is compatible with your laptop and fit it, then
-it will work just fine with acer-wmi.
-
-Bluetooth is exposed through rfkill.
-
-3G
-**
-
-3G is currently not autodetected, so the 'threeg' file is always created under
-sysfs. So far, no-one in possession of an Acer laptop with 3G built-in appears to
-have tried Linux, or reported back, so we don't have any information on this.
-
-If you have an Acer laptop that does have a 3G card in, please contact me so we
-can properly detect these, and find out a bit more about them.
-
-To read the status of the 3G card (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/threeg
-
-To enable the 3G card:
-echo 1 > /sys/devices/platform/acer-wmi/threeg
-
-To disable the 3G card:
-echo 0 > /sys/devices/platform/acer-wmi/threeg
-
-To set the state of the 3G card when loading acer-wmi, pass:
-threeg=X (where X is 0 or 1)
-
-Mail LED
-********
-
-This can be found in most older Acer laptops supported by acer-wmi, and many
-newer ones - it is built into the 'mail' button, and blinks when active.
-
-On newer (WMID) laptops though, we have no way of detecting the mail LED. If
-your laptop identifies itself in dmesg as a WMID model, then please try loading
-acer_acpi with:
-
-force_series=2490
-
-This will use a known alternative method of reading/ writing the mail LED. If
-it works, please report back to me with the DMI data from your laptop so this
-can be added to acer-wmi.
-
-The LED is exposed through the LED subsystem, and can be found in:
-
-/sys/devices/platform/acer-wmi/leds/acer-wmi::mail/
-
-The mail LED is autodetected, so if you don't have one, the LED device won't
-be registered.
-
-Backlight
-*********
-
-The backlight brightness control is available on all acer-wmi supported
-hardware. The maximum brightness level is usually 15, but on some newer laptops
-it's 10 (this is again autodetected).
-
-The backlight is exposed through the backlight subsystem, and can be found in:
-
-/sys/devices/platform/acer-wmi/backlight/acer-wmi/
-
-Credits
-*******
-
-Olaf Tauber, who did the real hard work when he developed acerhk
-http://www.cakey.de/acerhk/
-All the authors of laptop ACPI modules in the kernel, whose work
-was an inspiration in the early days of acer_acpi
-Mathieu Segaud, who solved the problem with having to modprobe the driver
-twice in acer_acpi 0.2.
-Jim Ramsay, who added support for the WMID interface
-Mark Smith, who started the original acer_acpi
-
-And the many people who have used both acer_acpi and acer-wmi.
diff --git a/MAINTAINERS b/MAINTAINERS
index 2e94220..29801f7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -223,10 +223,8 @@
F: drivers/platform/x86/acerhdf.c
ACER WMI LAPTOP EXTRAS
-M: Carlos Corbacho <carlos@strangeworlds.co.uk>
-L: aceracpi@googlegroups.com (subscribers-only)
+M: Joey Lee <jlee@novell.com>
L: platform-driver-x86@vger.kernel.org
-W: http://code.google.com/p/aceracpi
S: Maintained
F: drivers/platform/x86/acer-wmi.c
@@ -271,10 +269,8 @@
F: drivers/acpi/video.c
ACPI WMI DRIVER
-M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: platform-driver-x86@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
-S: Maintained
+S: Orphan
F: drivers/platform/x86/wmi.c
AD1889 ALSA SOUND DRIVER
@@ -3033,9 +3029,8 @@
F: drivers/net/wireless/hostap/
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
-M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: platform-driver-x86@vger.kernel.org
-S: Odd Fixes
+S: Orphan
F: drivers/platform/x86/tc1100-wmi.c
HP100: Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 5cb999b..45e0191 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -39,7 +39,7 @@
config ACERHDF
tristate "Acer Aspire One temperature and fan driver"
- depends on THERMAL && THERMAL_HWMON && ACPI
+ depends on THERMAL && ACPI
---help---
This is a driver for Acer Aspire One netbooks. It allows to access
the temperature sensor and to control the fan.
@@ -760,4 +760,13 @@
MXM is a standard for laptop graphics cards, the WMI interface
is required for switchable nvidia graphics machines
+config INTEL_OAKTRAIL
+ tristate "Intel Oaktrail Platform Extras"
+ depends on ACPI
+ depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
+ ---help---
+ Intel Oaktrail platform need this driver to provide interfaces to
+ enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
+ here; it will only load on supported platforms.
+
endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index a7ab3bc..afc1f83 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -41,5 +41,6 @@
obj-$(CONFIG_XO15_EBOOK) += xo15-ebook.o
obj-$(CONFIG_IBM_RTL) += ibm_rtl.o
obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o
-obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
obj-$(CONFIG_MXM_WMI) += mxm-wmi.o
+obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o
+obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index ac4e7f8..005417b 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -98,13 +98,26 @@
static const struct key_entry acer_wmi_keymap[] = {
{KE_KEY, 0x01, {KEY_WLAN} }, /* WiFi */
+ {KE_KEY, 0x03, {KEY_WLAN} }, /* WiFi */
{KE_KEY, 0x12, {KEY_BLUETOOTH} }, /* BT */
{KE_KEY, 0x21, {KEY_PROG1} }, /* Backup */
{KE_KEY, 0x22, {KEY_PROG2} }, /* Arcade */
{KE_KEY, 0x23, {KEY_PROG3} }, /* P_Key */
{KE_KEY, 0x24, {KEY_PROG4} }, /* Social networking_Key */
+ {KE_IGNORE, 0x41, {KEY_MUTE} },
+ {KE_IGNORE, 0x42, {KEY_PREVIOUSSONG} },
+ {KE_IGNORE, 0x43, {KEY_NEXTSONG} },
+ {KE_IGNORE, 0x44, {KEY_PLAYPAUSE} },
+ {KE_IGNORE, 0x45, {KEY_STOP} },
+ {KE_IGNORE, 0x48, {KEY_VOLUMEUP} },
+ {KE_IGNORE, 0x49, {KEY_VOLUMEDOWN} },
+ {KE_IGNORE, 0x61, {KEY_SWITCHVIDEOMODE} },
+ {KE_IGNORE, 0x62, {KEY_BRIGHTNESSUP} },
+ {KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} },
{KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */
+ {KE_IGNORE, 0x81, {KEY_SLEEP} },
{KE_KEY, 0x82, {KEY_TOUCHPAD_TOGGLE} }, /* Touch Pad On/Off */
+ {KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} },
{KE_END, 0}
};
@@ -122,6 +135,7 @@
*/
#define ACER_WMID3_GDS_WIRELESS (1<<0) /* WiFi */
#define ACER_WMID3_GDS_THREEG (1<<6) /* 3G */
+#define ACER_WMID3_GDS_WIMAX (1<<7) /* WiMAX */
#define ACER_WMID3_GDS_BLUETOOTH (1<<11) /* BT */
struct lm_input_params {
@@ -737,8 +751,11 @@
obj = (union acpi_object *) result.pointer;
if (obj && obj->type == ACPI_TYPE_BUFFER &&
- obj->buffer.length == sizeof(u32)) {
+ (obj->buffer.length == sizeof(u32) ||
+ obj->buffer.length == sizeof(u64))) {
tmp = *((u32 *) obj->buffer.pointer);
+ } else if (obj->type == ACPI_TYPE_INTEGER) {
+ tmp = (u32) obj->integer.value;
} else {
tmp = 0;
}
@@ -866,8 +883,11 @@
obj = (union acpi_object *) out.pointer;
if (obj && obj->type == ACPI_TYPE_BUFFER &&
- obj->buffer.length == sizeof(u32)) {
+ (obj->buffer.length == sizeof(u32) ||
+ obj->buffer.length == sizeof(u64))) {
devices = *((u32 *) obj->buffer.pointer);
+ } else if (obj->type == ACPI_TYPE_INTEGER) {
+ devices = (u32) obj->integer.value;
} else {
kfree(out.pointer);
return AE_ERROR;
@@ -876,7 +896,8 @@
dmi_walk(type_aa_dmi_decode, NULL);
if (!has_type_aa) {
interface->capability |= ACER_CAP_WIRELESS;
- interface->capability |= ACER_CAP_THREEG;
+ if (devices & 0x40)
+ interface->capability |= ACER_CAP_THREEG;
if (devices & 0x10)
interface->capability |= ACER_CAP_BLUETOOTH;
}
@@ -961,10 +982,12 @@
* These will all fail silently if the value given is invalid, or the
* capability isn't available on the given interface
*/
- set_u32(mailled, ACER_CAP_MAILLED);
- if (!has_type_aa)
+ if (mailled >= 0)
+ set_u32(mailled, ACER_CAP_MAILLED);
+ if (!has_type_aa && threeg >= 0)
set_u32(threeg, ACER_CAP_THREEG);
- set_u32(brightness, ACER_CAP_BRIGHTNESS);
+ if (brightness >= 0)
+ set_u32(brightness, ACER_CAP_BRIGHTNESS);
}
/*
@@ -1081,7 +1104,7 @@
return AE_ERROR;
}
if (obj->buffer.length != 8) {
- pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+ pr_warn("Unknown buffer length %d\n", obj->buffer.length);
kfree(obj);
return AE_ERROR;
}
@@ -1090,8 +1113,8 @@
kfree(obj);
if (return_value.error_code || return_value.ec_return_value)
- pr_warning("Get Device Status failed: "
- "0x%x - 0x%x\n", return_value.error_code,
+ pr_warn("Get Device Status failed: 0x%x - 0x%x\n",
+ return_value.error_code,
return_value.ec_return_value);
else
*value = !!(return_value.devices & device);
@@ -1124,6 +1147,114 @@
}
}
+static acpi_status wmid3_set_device_status(u32 value, u16 device)
+{
+ struct wmid3_gds_return_value return_value;
+ acpi_status status;
+ union acpi_object *obj;
+ u16 devices;
+ struct wmid3_gds_input_param params = {
+ .function_num = 0x1,
+ .hotkey_number = 0x01,
+ .devices = ACER_WMID3_GDS_WIRELESS &
+ ACER_WMID3_GDS_THREEG &
+ ACER_WMID3_GDS_WIMAX &
+ ACER_WMID3_GDS_BLUETOOTH,
+ };
+ struct acpi_buffer input = {
+ sizeof(struct wmid3_gds_input_param),
+ ¶ms
+ };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer output2 = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = output.pointer;
+
+ if (!obj)
+ return AE_ERROR;
+ else if (obj->type != ACPI_TYPE_BUFFER) {
+ kfree(obj);
+ return AE_ERROR;
+ }
+ if (obj->buffer.length != 8) {
+ pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+ kfree(obj);
+ return AE_ERROR;
+ }
+
+ return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+ kfree(obj);
+
+ if (return_value.error_code || return_value.ec_return_value) {
+ pr_warning("Get Current Device Status failed: "
+ "0x%x - 0x%x\n", return_value.error_code,
+ return_value.ec_return_value);
+ return status;
+ }
+
+ devices = return_value.devices;
+ params.function_num = 0x2;
+ params.hotkey_number = 0x01;
+ params.devices = (value) ? (devices | device) : (devices & ~device);
+
+ status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &input, &output2);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = output2.pointer;
+
+ if (!obj)
+ return AE_ERROR;
+ else if (obj->type != ACPI_TYPE_BUFFER) {
+ kfree(obj);
+ return AE_ERROR;
+ }
+ if (obj->buffer.length != 4) {
+ pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+ kfree(obj);
+ return AE_ERROR;
+ }
+
+ return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+ kfree(obj);
+
+ if (return_value.error_code || return_value.ec_return_value)
+ pr_warning("Set Device Status failed: "
+ "0x%x - 0x%x\n", return_value.error_code,
+ return_value.ec_return_value);
+
+ return status;
+}
+
+static acpi_status set_device_status(u32 value, u32 cap)
+{
+ if (wmi_has_guid(WMID_GUID3)) {
+ u16 device;
+
+ switch (cap) {
+ case ACER_CAP_WIRELESS:
+ device = ACER_WMID3_GDS_WIRELESS;
+ break;
+ case ACER_CAP_BLUETOOTH:
+ device = ACER_WMID3_GDS_BLUETOOTH;
+ break;
+ case ACER_CAP_THREEG:
+ device = ACER_WMID3_GDS_THREEG;
+ break;
+ default:
+ return AE_ERROR;
+ }
+ return wmid3_set_device_status(value, device);
+
+ } else {
+ return set_u32(value, cap);
+ }
+}
+
/*
* Rfkill devices
*/
@@ -1160,7 +1291,7 @@
u32 cap = (unsigned long)data;
if (rfkill_inited) {
- status = set_u32(!blocked, cap);
+ status = set_device_status(!blocked, cap);
if (ACPI_FAILURE(status))
return -ENODEV;
}
@@ -1317,7 +1448,7 @@
status = wmi_get_event_data(value, &response);
if (status != AE_OK) {
- pr_warning("bad event status 0x%x\n", status);
+ pr_warn("bad event status 0x%x\n", status);
return;
}
@@ -1326,12 +1457,12 @@
if (!obj)
return;
if (obj->type != ACPI_TYPE_BUFFER) {
- pr_warning("Unknown response received %d\n", obj->type);
+ pr_warn("Unknown response received %d\n", obj->type);
kfree(obj);
return;
}
if (obj->buffer.length != 8) {
- pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+ pr_warn("Unknown buffer length %d\n", obj->buffer.length);
kfree(obj);
return;
}
@@ -1343,7 +1474,7 @@
case WMID_HOTKEY_EVENT:
if (return_value.device_state) {
u16 device_state = return_value.device_state;
- pr_debug("deivces states: 0x%x\n", device_state);
+ pr_debug("device state: 0x%x\n", device_state);
if (has_cap(ACER_CAP_WIRELESS))
rfkill_set_sw_state(wireless_rfkill,
!(device_state & ACER_WMID3_GDS_WIRELESS));
@@ -1356,11 +1487,11 @@
}
if (!sparse_keymap_report_event(acer_wmi_input_dev,
return_value.key_num, 1, true))
- pr_warning("Unknown key number - 0x%x\n",
+ pr_warn("Unknown key number - 0x%x\n",
return_value.key_num);
break;
default:
- pr_warning("Unknown function number - %d - %d\n",
+ pr_warn("Unknown function number - %d - %d\n",
return_value.function, return_value.key_num);
break;
}
@@ -1389,7 +1520,7 @@
return AE_ERROR;
}
if (obj->buffer.length != 4) {
- pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+ pr_warn("Unknown buffer length %d\n", obj->buffer.length);
kfree(obj);
return AE_ERROR;
}
@@ -1414,11 +1545,11 @@
status = wmid3_set_lm_mode(¶ms, &return_value);
if (return_value.error_code || return_value.ec_return_value)
- pr_warning("Enabling EC raw mode failed: "
- "0x%x - 0x%x\n", return_value.error_code,
- return_value.ec_return_value);
+ pr_warn("Enabling EC raw mode failed: 0x%x - 0x%x\n",
+ return_value.error_code,
+ return_value.ec_return_value);
else
- pr_info("Enabled EC raw mode");
+ pr_info("Enabled EC raw mode\n");
return status;
}
@@ -1437,9 +1568,9 @@
status = wmid3_set_lm_mode(¶ms, &return_value);
if (return_value.error_code || return_value.ec_return_value)
- pr_warning("Enabling Launch Manager failed: "
- "0x%x - 0x%x\n", return_value.error_code,
- return_value.ec_return_value);
+ pr_warn("Enabling Launch Manager failed: 0x%x - 0x%x\n",
+ return_value.error_code,
+ return_value.ec_return_value);
return status;
}
@@ -1506,8 +1637,11 @@
obj = (union acpi_object *) out.pointer;
if (obj && obj->type == ACPI_TYPE_BUFFER &&
- obj->buffer.length == sizeof(u32)) {
+ (obj->buffer.length == sizeof(u32) ||
+ obj->buffer.length == sizeof(u64))) {
devices = *((u32 *) obj->buffer.pointer);
+ } else if (obj->type == ACPI_TYPE_INTEGER) {
+ devices = (u32) obj->integer.value;
}
kfree(out.pointer);
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 60f9cfc..fca3489 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -35,10 +35,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/fs.h>
#include <linux/dmi.h>
-#include <acpi/acpi_drivers.h>
-#include <linux/sched.h>
+#include <linux/acpi.h>
#include <linux/thermal.h>
#include <linux/platform_device.h>
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index c53b3ff..d65df92 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -318,7 +318,7 @@
if (status != AE_OK) {
if (ret)
- pr_warning("Error finding %s\n", method);
+ pr_warn("Error finding %s\n", method);
return -ENODEV;
}
return 0;
@@ -383,7 +383,7 @@
rv = acpi_evaluate_integer(asus->handle, METHOD_KBD_LIGHT_GET,
¶ms, &kblv);
if (ACPI_FAILURE(rv)) {
- pr_warning("Error reading kled level\n");
+ pr_warn("Error reading kled level\n");
return -ENODEV;
}
return kblv;
@@ -397,7 +397,7 @@
kblv = 0;
if (write_acpi_int(asus->handle, METHOD_KBD_LIGHT_SET, kblv)) {
- pr_warning("Keyboard LED display write failed\n");
+ pr_warn("Keyboard LED display write failed\n");
return -EINVAL;
}
return 0;
@@ -531,7 +531,7 @@
rv = acpi_evaluate_integer(asus->handle, METHOD_BRIGHTNESS_GET,
NULL, &value);
if (ACPI_FAILURE(rv))
- pr_warning("Error reading brightness\n");
+ pr_warn("Error reading brightness\n");
return value;
}
@@ -541,7 +541,7 @@
struct asus_laptop *asus = bl_get_data(bd);
if (write_acpi_int(asus->handle, METHOD_BRIGHTNESS_SET, value)) {
- pr_warning("Error changing brightness\n");
+ pr_warn("Error changing brightness\n");
return -EIO;
}
return 0;
@@ -730,7 +730,7 @@
rv = parse_arg(buf, count, &value);
if (rv > 0) {
if (write_acpi_int(asus->handle, METHOD_LEDD, value)) {
- pr_warning("LED display write failed\n");
+ pr_warn("LED display write failed\n");
return -ENODEV;
}
asus->ledd_status = (u32) value;
@@ -752,7 +752,7 @@
rv = acpi_evaluate_integer(asus->handle, METHOD_WL_STATUS,
NULL, &status);
if (ACPI_FAILURE(rv)) {
- pr_warning("Error reading Wireless status\n");
+ pr_warn("Error reading Wireless status\n");
return -EINVAL;
}
return !!(status & mask);
@@ -764,7 +764,7 @@
static int asus_wlan_set(struct asus_laptop *asus, int status)
{
if (write_acpi_int(asus->handle, METHOD_WLAN, !!status)) {
- pr_warning("Error setting wlan status to %d", status);
+ pr_warn("Error setting wlan status to %d\n", status);
return -EIO;
}
return 0;
@@ -792,7 +792,7 @@
static int asus_bluetooth_set(struct asus_laptop *asus, int status)
{
if (write_acpi_int(asus->handle, METHOD_BLUETOOTH, !!status)) {
- pr_warning("Error setting bluetooth status to %d", status);
+ pr_warn("Error setting bluetooth status to %d\n", status);
return -EIO;
}
return 0;
@@ -821,7 +821,7 @@
static int asus_wimax_set(struct asus_laptop *asus, int status)
{
if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
- pr_warning("Error setting wimax status to %d", status);
+ pr_warn("Error setting wimax status to %d\n", status);
return -EIO;
}
return 0;
@@ -850,7 +850,7 @@
static int asus_wwan_set(struct asus_laptop *asus, int status)
{
if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
- pr_warning("Error setting wwan status to %d", status);
+ pr_warn("Error setting wwan status to %d\n", status);
return -EIO;
}
return 0;
@@ -880,7 +880,7 @@
{
/* no sanity check needed for now */
if (write_acpi_int(asus->handle, METHOD_SWITCH_DISPLAY, value))
- pr_warning("Error setting display\n");
+ pr_warn("Error setting display\n");
return;
}
@@ -909,7 +909,7 @@
static void asus_als_switch(struct asus_laptop *asus, int value)
{
if (write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value))
- pr_warning("Error setting light sensor switch\n");
+ pr_warn("Error setting light sensor switch\n");
asus->light_switch = value;
}
@@ -937,7 +937,7 @@
static void asus_als_level(struct asus_laptop *asus, int value)
{
if (write_acpi_int(asus->handle, METHOD_ALS_LEVEL, value))
- pr_warning("Error setting light sensor level\n");
+ pr_warn("Error setting light sensor level\n");
asus->light_level = value;
}
@@ -976,7 +976,7 @@
rv = acpi_evaluate_integer(asus->handle, METHOD_GPS_STATUS,
NULL, &status);
if (ACPI_FAILURE(rv)) {
- pr_warning("Error reading GPS status\n");
+ pr_warn("Error reading GPS status\n");
return -ENODEV;
}
return !!status;
@@ -1284,7 +1284,7 @@
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info);
if (ACPI_FAILURE(status))
- pr_warning("Couldn't get the DSDT table header\n");
+ pr_warn("Couldn't get the DSDT table header\n");
/* We have to write 0 on init this far for all ASUS models */
if (write_acpi_int_ret(asus->handle, "INIT", 0, &buffer)) {
@@ -1296,7 +1296,7 @@
status =
acpi_evaluate_integer(asus->handle, "BSTS", NULL, &bsts_result);
if (ACPI_FAILURE(status))
- pr_warning("Error calling BSTS\n");
+ pr_warn("Error calling BSTS\n");
else if (bsts_result)
pr_notice("BSTS called, 0x%02x returned\n",
(uint) bsts_result);
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 832a3fd7..00460cb 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -425,7 +425,7 @@
if (asus->hotplug_slot) {
bus = pci_find_bus(0, 1);
if (!bus) {
- pr_warning("Unable to find PCI bus 1?\n");
+ pr_warn("Unable to find PCI bus 1?\n");
goto out_unlock;
}
@@ -436,12 +436,12 @@
absent = (l == 0xffffffff);
if (blocked != absent) {
- pr_warning("BIOS says wireless lan is %s, "
- "but the pci device is %s\n",
- blocked ? "blocked" : "unblocked",
- absent ? "absent" : "present");
- pr_warning("skipped wireless hotplug as probably "
- "inappropriate for this model\n");
+ pr_warn("BIOS says wireless lan is %s, "
+ "but the pci device is %s\n",
+ blocked ? "blocked" : "unblocked",
+ absent ? "absent" : "present");
+ pr_warn("skipped wireless hotplug as probably "
+ "inappropriate for this model\n");
goto out_unlock;
}
@@ -500,7 +500,7 @@
ACPI_SYSTEM_NOTIFY,
asus_rfkill_notify, asus);
if (ACPI_FAILURE(status))
- pr_warning("Failed to register notify on %s\n", node);
+ pr_warn("Failed to register notify on %s\n", node);
} else
return -ENODEV;
@@ -1223,7 +1223,7 @@
/*
* Platform device
*/
-static int __init asus_wmi_platform_init(struct asus_wmi *asus)
+static int asus_wmi_platform_init(struct asus_wmi *asus)
{
int rv;
@@ -1583,12 +1583,12 @@
int ret;
if (!wmi_has_guid(ASUS_WMI_MGMT_GUID)) {
- pr_warning("Management GUID not found\n");
+ pr_warn("Management GUID not found\n");
return -ENODEV;
}
if (wdrv->event_guid && !wmi_has_guid(wdrv->event_guid)) {
- pr_warning("Event GUID not found\n");
+ pr_warn("Event GUID not found\n");
return -ENODEV;
}
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index f503607..d9312b3 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -30,6 +30,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -581,8 +583,7 @@
if (read_acpi_int(NULL, ledname, &led_status))
return led_status;
else
- printk(KERN_WARNING "Asus ACPI: Error reading LED "
- "status\n");
+ pr_warn("Error reading LED status\n");
}
return (hotk->status & ledmask) ? 1 : 0;
}
@@ -621,8 +622,7 @@
led_out = !led_out;
if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
- printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",
- ledname);
+ pr_warn("LED (%s) write failed\n", ledname);
return rv;
}
@@ -679,8 +679,7 @@
if (rv > 0) {
if (!write_acpi_int
(hotk->handle, hotk->methods->mt_ledd, value, NULL))
- printk(KERN_WARNING
- "Asus ACPI: LED display write failed\n");
+ pr_warn("LED display write failed\n");
else
hotk->ledd_status = (u32) value;
}
@@ -838,8 +837,7 @@
} else {
/* We don't have to check anything if we are here */
if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
- printk(KERN_WARNING
- "Asus ACPI: Error reading LCD status\n");
+ pr_warn("Error reading LCD status\n");
if (hotk->model == L2D)
lcd = ~lcd;
@@ -871,7 +869,7 @@
the exact behaviour is simulated here */
}
if (ACPI_FAILURE(status))
- printk(KERN_WARNING "Asus ACPI: Error switching LCD\n");
+ pr_warn("Error switching LCD\n");
}
return 0;
@@ -915,13 +913,11 @@
if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */
if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get,
&value))
- printk(KERN_WARNING
- "Asus ACPI: Error reading brightness\n");
+ pr_warn("Error reading brightness\n");
} else if (hotk->methods->brightness_status) { /* For D1 for example */
if (!read_acpi_int(NULL, hotk->methods->brightness_status,
&value))
- printk(KERN_WARNING
- "Asus ACPI: Error reading brightness\n");
+ pr_warn("Error reading brightness\n");
} else /* No GPLV method */
value = hotk->brightness;
return value;
@@ -939,8 +935,7 @@
if (hotk->methods->brightness_set) {
if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
value, NULL)) {
- printk(KERN_WARNING
- "Asus ACPI: Error changing brightness\n");
+ pr_warn("Error changing brightness\n");
ret = -EIO;
}
goto out;
@@ -955,8 +950,7 @@
NULL, NULL);
(value > 0) ? value-- : value++;
if (ACPI_FAILURE(status)) {
- printk(KERN_WARNING
- "Asus ACPI: Error changing brightness\n");
+ pr_warn("Error changing brightness\n");
ret = -EIO;
}
}
@@ -1008,7 +1002,7 @@
/* no sanity check needed for now */
if (!write_acpi_int(hotk->handle, hotk->methods->display_set,
value, NULL))
- printk(KERN_WARNING "Asus ACPI: Error setting display\n");
+ pr_warn("Error setting display\n");
return;
}
@@ -1021,8 +1015,7 @@
int value = 0;
if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value))
- printk(KERN_WARNING
- "Asus ACPI: Error reading display status\n");
+ pr_warn("Error reading display status\n");
value &= 0x07; /* needed for some models, shouldn't hurt others */
seq_printf(m, "%d\n", value);
return 0;
@@ -1068,7 +1061,7 @@
proc = proc_create_data(name, mode, acpi_device_dir(device),
proc_fops, acpi_driver_data(device));
if (!proc) {
- printk(KERN_WARNING " Unable to create %s fs entry\n", name);
+ pr_warn(" Unable to create %s fs entry\n", name);
return -1;
}
proc->uid = asus_uid;
@@ -1085,8 +1078,8 @@
mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
} else {
mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
- printk(KERN_WARNING " asus_uid and asus_gid parameters are "
- "deprecated, use chown and chmod instead!\n");
+ pr_warn(" asus_uid and asus_gid parameters are "
+ "deprecated, use chown and chmod instead!\n");
}
acpi_device_dir(device) = asus_proc_dir;
@@ -1099,8 +1092,7 @@
proc->uid = asus_uid;
proc->gid = asus_gid;
} else {
- printk(KERN_WARNING " Unable to create " PROC_INFO
- " fs entry\n");
+ pr_warn(" Unable to create " PROC_INFO " fs entry\n");
}
if (hotk->methods->mt_wled) {
@@ -1283,20 +1275,19 @@
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
- printk(KERN_WARNING " Couldn't get the DSDT table header\n");
+ pr_warn(" Couldn't get the DSDT table header\n");
/* We have to write 0 on init this far for all ASUS models */
if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
- printk(KERN_ERR " Hotkey initialization failed\n");
+ pr_err(" Hotkey initialization failed\n");
return -ENODEV;
}
/* This needs to be called for some laptops to init properly */
if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result))
- printk(KERN_WARNING " Error calling BSTS\n");
+ pr_warn(" Error calling BSTS\n");
else if (bsts_result)
- printk(KERN_NOTICE " BSTS called, 0x%02x returned\n",
- bsts_result);
+ pr_notice(" BSTS called, 0x%02x returned\n", bsts_result);
/*
* Try to match the object returned by INIT to the specific model.
@@ -1324,23 +1315,21 @@
if (asus_info &&
strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
hotk->model = P30;
- printk(KERN_NOTICE
- " Samsung P30 detected, supported\n");
+ pr_notice(" Samsung P30 detected, supported\n");
hotk->methods = &model_conf[hotk->model];
kfree(model);
return 0;
} else {
hotk->model = M2E;
- printk(KERN_NOTICE " unsupported model %s, trying "
- "default values\n", string);
- printk(KERN_NOTICE
- " send /proc/acpi/dsdt to the developers\n");
+ pr_notice(" unsupported model %s, trying default values\n",
+ string);
+ pr_notice(" send /proc/acpi/dsdt to the developers\n");
kfree(model);
return -ENODEV;
}
}
hotk->methods = &model_conf[hotk->model];
- printk(KERN_NOTICE " %s model detected, supported\n", string);
+ pr_notice(" %s model detected, supported\n", string);
/* Sort of per-model blacklist */
if (strncmp(string, "L2B", 3) == 0)
@@ -1385,7 +1374,7 @@
if (hotk->device->status.present) {
result = asus_hotk_get_info();
} else {
- printk(KERN_ERR " Hotkey device not present, aborting\n");
+ pr_err(" Hotkey device not present, aborting\n");
return -EINVAL;
}
@@ -1399,8 +1388,7 @@
acpi_status status = AE_OK;
int result;
- printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n",
- ASUS_ACPI_VERSION);
+ pr_notice("Asus Laptop ACPI Extras version %s\n", ASUS_ACPI_VERSION);
hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
if (!hotk)
@@ -1428,15 +1416,14 @@
acpi_evaluate_object(NULL, hotk->methods->brightness_down,
NULL, NULL);
if (ACPI_FAILURE(status))
- printk(KERN_WARNING " Error changing brightness\n");
+ pr_warn(" Error changing brightness\n");
else {
status =
acpi_evaluate_object(NULL,
hotk->methods->brightness_up,
NULL, NULL);
if (ACPI_FAILURE(status))
- printk(KERN_WARNING " Strange, error changing"
- " brightness\n");
+ pr_warn(" Strange, error changing brightness\n");
}
}
@@ -1488,7 +1475,7 @@
asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir);
if (!asus_proc_dir) {
- printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n");
+ pr_err("Unable to create /proc entry\n");
acpi_bus_unregister_driver(&asus_hotk_driver);
return -ENODEV;
}
@@ -1513,7 +1500,7 @@
&asus_backlight_data,
&props);
if (IS_ERR(asus_backlight_device)) {
- printk(KERN_ERR "Could not register asus backlight device\n");
+ pr_err("Could not register asus backlight device\n");
asus_backlight_device = NULL;
asus_acpi_exit();
return -ENODEV;
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index 9b3afb6..3f204fd 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -68,6 +68,8 @@
* only enabled on a JHL90 board until it is verified that they work on the
* other boards too. See the extra_features variable. */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -760,16 +762,14 @@
static int dmi_check_cb(const struct dmi_system_id *id)
{
- printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s'\n",
- id->ident);
+ pr_info("Identified laptop model '%s'\n", id->ident);
extra_features = false;
return 1;
}
static int dmi_check_cb_extra(const struct dmi_system_id *id)
{
- printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s', "
- "enabling extra features\n",
+ pr_info("Identified laptop model '%s', enabling extra features\n",
id->ident);
extra_features = true;
return 1;
@@ -956,14 +956,12 @@
int ret;
if (acpi_disabled) {
- printk(KERN_ERR DRIVER_NAME": ACPI needs to be enabled for "
- "this driver to work!\n");
+ pr_err("ACPI needs to be enabled for this driver to work!\n");
return -ENODEV;
}
if (!force && !dmi_check_system(compal_dmi_table)) {
- printk(KERN_ERR DRIVER_NAME": Motherboard not recognized (You "
- "could try the module's force-parameter)");
+ pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");
return -ENODEV;
}
@@ -998,8 +996,7 @@
if (ret)
goto err_rfkill;
- printk(KERN_INFO DRIVER_NAME": Driver "DRIVER_VERSION
- " successfully loaded\n");
+ pr_info("Driver " DRIVER_VERSION " successfully loaded\n");
return 0;
err_rfkill:
@@ -1064,7 +1061,7 @@
rfkill_destroy(wifi_rfkill);
rfkill_destroy(bt_rfkill);
- printk(KERN_INFO DRIVER_NAME": Driver unloaded\n");
+ pr_info("Driver unloaded\n");
}
static int __devexit compal_remove(struct platform_device *pdev)
@@ -1074,8 +1071,7 @@
if (!extra_features)
return 0;
- printk(KERN_INFO DRIVER_NAME": Unloading: resetting fan control "
- "to motherboard\n");
+ pr_info("Unloading: resetting fan control to motherboard\n");
pwm_disable_control();
data = platform_get_drvdata(pdev);
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index de301aa8..d3841de 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -11,6 +11,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -434,8 +436,7 @@
int ret;
if (dmi_check_system(dell_blacklist)) {
- printk(KERN_INFO "dell-laptop: Blacklisted hardware detected - "
- "not enabling rfkill\n");
+ pr_info("Blacklisted hardware detected - not enabling rfkill\n");
return 0;
}
@@ -606,7 +607,7 @@
dmi_walk(find_tokens, NULL);
if (!da_tokens) {
- printk(KERN_INFO "dell-laptop: Unable to find dmi tokens\n");
+ pr_info("Unable to find dmi tokens\n");
return -ENODEV;
}
@@ -636,14 +637,13 @@
ret = dell_setup_rfkill();
if (ret) {
- printk(KERN_WARNING "dell-laptop: Unable to setup rfkill\n");
+ pr_warn("Unable to setup rfkill\n");
goto fail_rfkill;
}
ret = i8042_install_filter(dell_laptop_i8042_filter);
if (ret) {
- printk(KERN_WARNING
- "dell-laptop: Unable to install key filter\n");
+ pr_warn("Unable to install key filter\n");
goto fail_filter;
}
diff --git a/drivers/platform/x86/dell-wmi-aio.c b/drivers/platform/x86/dell-wmi-aio.c
index 0ed8457..3f94545 100644
--- a/drivers/platform/x86/dell-wmi-aio.c
+++ b/drivers/platform/x86/dell-wmi-aio.c
@@ -15,6 +15,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
@@ -138,7 +139,7 @@
guid = dell_wmi_aio_find();
if (!guid) {
- pr_warning("No known WMI GUID found\n");
+ pr_warn("No known WMI GUID found\n");
return -ENXIO;
}
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 77f1d55..ce79082 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -23,6 +23,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -141,7 +143,7 @@
status = wmi_get_event_data(value, &response);
if (status != AE_OK) {
- printk(KERN_INFO "dell-wmi: bad event status 0x%x\n", status);
+ pr_info("bad event status 0x%x\n", status);
return;
}
@@ -153,8 +155,8 @@
u16 *buffer_entry = (u16 *)obj->buffer.pointer;
if (dell_new_hk_type && (buffer_entry[1] != 0x10)) {
- printk(KERN_INFO "dell-wmi: Received unknown WMI event"
- " (0x%x)\n", buffer_entry[1]);
+ pr_info("Received unknown WMI event (0x%x)\n",
+ buffer_entry[1]);
kfree(obj);
return;
}
@@ -167,8 +169,7 @@
key = sparse_keymap_entry_from_scancode(dell_wmi_input_dev,
reported_key);
if (!key) {
- printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
- reported_key);
+ pr_info("Unknown key %x pressed\n", reported_key);
} else if ((key->keycode == KEY_BRIGHTNESSUP ||
key->keycode == KEY_BRIGHTNESSDOWN) && acpi_video) {
/* Don't report brightness notifications that will also
@@ -275,7 +276,7 @@
acpi_status status;
if (!wmi_has_guid(DELL_EVENT_GUID)) {
- printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n");
+ pr_warn("No known WMI GUID found\n");
return -ENODEV;
}
@@ -290,9 +291,7 @@
dell_wmi_notify, NULL);
if (ACPI_FAILURE(status)) {
dell_wmi_input_destroy();
- printk(KERN_ERR
- "dell-wmi: Unable to register notify handler - %d\n",
- status);
+ pr_err("Unable to register notify handler - %d\n", status);
return -ENODEV;
}
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 2c1abf6..1c45d92 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -228,7 +228,7 @@
return -ENODEV;
if (write_acpi_int(eeepc->handle, method, value))
- pr_warning("Error writing %s\n", method);
+ pr_warn("Error writing %s\n", method);
return 0;
}
@@ -243,7 +243,7 @@
return -ENODEV;
if (read_acpi_int(eeepc->handle, method, &value))
- pr_warning("Error reading %s\n", method);
+ pr_warn("Error reading %s\n", method);
return value;
}
@@ -261,7 +261,7 @@
status = acpi_get_handle(eeepc->handle, (char *)method,
handle);
if (status != AE_OK) {
- pr_warning("Error finding %s\n", method);
+ pr_warn("Error finding %s\n", method);
return -ENODEV;
}
return 0;
@@ -417,7 +417,7 @@
switch (value) {
case 0:
if (eeepc->cpufv_disabled)
- pr_warning("cpufv enabled (not officially supported "
+ pr_warn("cpufv enabled (not officially supported "
"on this model)\n");
eeepc->cpufv_disabled = false;
return rv;
@@ -609,7 +609,7 @@
bus = port->subordinate;
if (!bus) {
- pr_warning("Unable to find PCI bus?\n");
+ pr_warn("Unable to find PCI bus 1?\n");
goto out_unlock;
}
@@ -621,12 +621,12 @@
absent = (l == 0xffffffff);
if (blocked != absent) {
- pr_warning("BIOS says wireless lan is %s, "
- "but the pci device is %s\n",
+ pr_warn("BIOS says wireless lan is %s, "
+ "but the pci device is %s\n",
blocked ? "blocked" : "unblocked",
absent ? "absent" : "present");
- pr_warning("skipped wireless hotplug as probably "
- "inappropriate for this model\n");
+ pr_warn("skipped wireless hotplug as probably "
+ "inappropriate for this model\n");
goto out_unlock;
}
@@ -691,7 +691,8 @@
eeepc_rfkill_notify,
eeepc);
if (ACPI_FAILURE(status))
- pr_warning("Failed to register notify on %s\n", node);
+ pr_warn("Failed to register notify on %s\n", node);
+
/*
* Refresh pci hotplug in case the rfkill state was
* changed during setup.
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index 649dcad..4aa867a 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -84,7 +84,7 @@
static acpi_status eeepc_wmi_parse_device(acpi_handle handle, u32 level,
void *context, void **retval)
{
- pr_warning("Found legacy ATKD device (%s)", EEEPC_ACPI_HID);
+ pr_warn("Found legacy ATKD device (%s)\n", EEEPC_ACPI_HID);
*(bool *)context = true;
return AE_CTRL_TERMINATE;
}
@@ -105,12 +105,12 @@
static int eeepc_wmi_probe(struct platform_device *pdev)
{
if (eeepc_wmi_check_atkd()) {
- pr_warning("WMI device present, but legacy ATKD device is also "
- "present and enabled.");
- pr_warning("You probably booted with acpi_osi=\"Linux\" or "
- "acpi_osi=\"!Windows 2009\"");
- pr_warning("Can't load eeepc-wmi, use default acpi_osi "
- "(preferred) or eeepc-laptop");
+ pr_warn("WMI device present, but legacy ATKD device is also "
+ "present and enabled\n");
+ pr_warn("You probably booted with acpi_osi=\"Linux\" or "
+ "acpi_osi=\"!Windows 2009\"\n");
+ pr_warn("Can't load eeepc-wmi, use default acpi_osi "
+ "(preferred) or eeepc-laptop\n");
return -EBUSY;
}
return 0;
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 493054c..6b26666 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -56,6 +56,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -585,8 +587,7 @@
static void dmi_check_cb_common(const struct dmi_system_id *id)
{
acpi_handle handle;
- printk(KERN_INFO "fujitsu-laptop: Identified laptop model '%s'.\n",
- id->ident);
+ pr_info("Identified laptop model '%s'\n", id->ident);
if (use_alt_lcd_levels == -1) {
if (ACPI_SUCCESS(acpi_get_handle(NULL,
"\\_SB.PCI0.LPCB.FJEX.SBL2", &handle)))
@@ -691,11 +692,11 @@
result = acpi_bus_update_power(fujitsu->acpi_handle, &state);
if (result) {
- printk(KERN_ERR "Error reading power state\n");
+ pr_err("Error reading power state\n");
goto err_unregister_input_dev;
}
- printk(KERN_INFO "ACPI: %s [%s] (%s)\n",
+ pr_info("ACPI: %s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state ? "on" : "off");
@@ -707,7 +708,7 @@
if (ACPI_FAILURE
(acpi_evaluate_object
(device->handle, METHOD_NAME__INI, NULL, NULL)))
- printk(KERN_ERR "_INI Method failed\n");
+ pr_err("_INI Method failed\n");
}
/* do config (detect defaults) */
@@ -827,7 +828,7 @@
error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int),
GFP_KERNEL);
if (error) {
- printk(KERN_ERR "kfifo_alloc failed\n");
+ pr_err("kfifo_alloc failed\n");
goto err_stop;
}
@@ -859,13 +860,13 @@
result = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state);
if (result) {
- printk(KERN_ERR "Error reading power state\n");
+ pr_err("Error reading power state\n");
goto err_unregister_input_dev;
}
- printk(KERN_INFO "ACPI: %s [%s] (%s)\n",
- acpi_device_name(device), acpi_device_bid(device),
- !device->power.state ? "on" : "off");
+ pr_info("ACPI: %s [%s] (%s)\n",
+ acpi_device_name(device), acpi_device_bid(device),
+ !device->power.state ? "on" : "off");
fujitsu_hotkey->dev = device;
@@ -875,7 +876,7 @@
if (ACPI_FAILURE
(acpi_evaluate_object
(device->handle, METHOD_NAME__INI, NULL, NULL)))
- printk(KERN_ERR "_INI Method failed\n");
+ pr_err("_INI Method failed\n");
}
i = 0;
@@ -897,8 +898,7 @@
call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
/* Suspect this is a keymap of the application panel, print it */
- printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n",
- call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0));
+ pr_info("BTNI: [0x%x]\n", call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0));
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
if (call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) {
@@ -907,8 +907,8 @@
if (result == 0) {
fujitsu_hotkey->logolamp_registered = 1;
} else {
- printk(KERN_ERR "fujitsu-laptop: Could not register "
- "LED handler for logo lamp, error %i\n", result);
+ pr_err("Could not register LED handler for logo lamp, error %i\n",
+ result);
}
}
@@ -919,8 +919,8 @@
if (result == 0) {
fujitsu_hotkey->kblamps_registered = 1;
} else {
- printk(KERN_ERR "fujitsu-laptop: Could not register "
- "LED handler for keyboard lamps, error %i\n", result);
+ pr_err("Could not register LED handler for keyboard lamps, error %i\n",
+ result);
}
}
#endif
@@ -1169,8 +1169,7 @@
fujitsu->bl_device->props.power = 0;
}
- printk(KERN_INFO "fujitsu-laptop: driver " FUJITSU_DRIVER_VERSION
- " successfully loaded.\n");
+ pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n");
return 0;
@@ -1216,7 +1215,7 @@
kfree(fujitsu);
- printk(KERN_INFO "fujitsu-laptop: driver unloaded.\n");
+ pr_info("driver unloaded\n");
}
module_init(fujitsu_init);
diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c
index 067bf36..5a34973 100644
--- a/drivers/platform/x86/hdaps.c
+++ b/drivers/platform/x86/hdaps.c
@@ -26,6 +26,8 @@
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
@@ -238,7 +240,7 @@
__check_latch(0x1611, 0x01))
goto out;
- printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x).\n",
+ printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x)\n",
__get_latch(0x1611));
outb(0x17, 0x1610);
@@ -299,7 +301,7 @@
if (ret)
return ret;
- printk(KERN_INFO "hdaps: device successfully initialized.\n");
+ pr_info("device successfully initialized\n");
return 0;
}
@@ -480,7 +482,7 @@
/* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */
static int __init hdaps_dmi_match(const struct dmi_system_id *id)
{
- printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
+ pr_info("%s detected\n", id->ident);
return 1;
}
@@ -488,8 +490,7 @@
static int __init hdaps_dmi_match_invert(const struct dmi_system_id *id)
{
hdaps_invert = (unsigned long)id->driver_data;
- printk(KERN_INFO "hdaps: inverting axis (%u) readings.\n",
- hdaps_invert);
+ pr_info("inverting axis (%u) readings\n", hdaps_invert);
return hdaps_dmi_match(id);
}
@@ -543,7 +544,7 @@
int ret;
if (!dmi_check_system(hdaps_whitelist)) {
- printk(KERN_WARNING "hdaps: supported laptop not found!\n");
+ pr_warn("supported laptop not found!\n");
ret = -ENODEV;
goto out;
}
@@ -595,7 +596,7 @@
if (ret)
goto out_idev;
- printk(KERN_INFO "hdaps: driver successfully loaded.\n");
+ pr_info("driver successfully loaded\n");
return 0;
out_idev:
@@ -609,7 +610,7 @@
out_region:
release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);
out:
- printk(KERN_WARNING "hdaps: driver init failed (ret=%d)!\n", ret);
+ pr_warn("driver init failed (ret=%d)!\n", ret);
return ret;
}
@@ -622,7 +623,7 @@
platform_driver_unregister(&hdaps_driver);
release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);
- printk(KERN_INFO "hdaps: driver unloaded.\n");
+ pr_info("driver unloaded\n");
}
module_init(hdaps_init);
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1bc4a75..f94017b 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -24,6 +24,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -54,9 +56,6 @@
#define HPWMI_HOTKEY_QUERY 0xc
#define HPWMI_WIRELESS2_QUERY 0x1b
-#define PREFIX "HP WMI: "
-#define UNIMP "Unimplemented "
-
enum hp_wmi_radio {
HPWMI_WIFI = 0,
HPWMI_BLUETOOTH = 1,
@@ -228,9 +227,8 @@
if (bios_return->return_code) {
if (bios_return->return_code != HPWMI_RET_UNKNOWN_CMDTYPE)
- printk(KERN_WARNING PREFIX "query 0x%x returned "
- "error 0x%x\n",
- query, bios_return->return_code);
+ pr_warn("query 0x%x returned error 0x%x\n",
+ query, bios_return->return_code);
kfree(obj);
return bios_return->return_code;
}
@@ -384,8 +382,7 @@
if (num >= state.count ||
devstate->rfkill_id != rfkill2[i].id) {
- printk(KERN_WARNING PREFIX "power configuration of "
- "the wireless devices unexpectedly changed\n");
+ pr_warn("power configuration of the wireless devices unexpectedly changed\n");
continue;
}
@@ -471,7 +468,7 @@
status = wmi_get_event_data(value, &response);
if (status != AE_OK) {
- printk(KERN_INFO PREFIX "bad event status 0x%x\n", status);
+ pr_info("bad event status 0x%x\n", status);
return;
}
@@ -480,8 +477,7 @@
if (!obj)
return;
if (obj->type != ACPI_TYPE_BUFFER) {
- printk(KERN_INFO "hp-wmi: Unknown response received %d\n",
- obj->type);
+ pr_info("Unknown response received %d\n", obj->type);
kfree(obj);
return;
}
@@ -498,8 +494,7 @@
event_id = *location;
event_data = *(location + 2);
} else {
- printk(KERN_INFO "hp-wmi: Unknown buffer length %d\n",
- obj->buffer.length);
+ pr_info("Unknown buffer length %d\n", obj->buffer.length);
kfree(obj);
return;
}
@@ -527,8 +522,7 @@
if (!sparse_keymap_report_event(hp_wmi_input_dev,
key_code, 1, true))
- printk(KERN_INFO PREFIX "Unknown key code - 0x%x\n",
- key_code);
+ pr_info("Unknown key code - 0x%x\n", key_code);
break;
case HPWMI_WIRELESS:
if (rfkill2_count) {
@@ -550,14 +544,12 @@
hp_wmi_get_hw_state(HPWMI_WWAN));
break;
case HPWMI_CPU_BATTERY_THROTTLE:
- printk(KERN_INFO PREFIX UNIMP "CPU throttle because of 3 Cell"
- " battery event detected\n");
+ pr_info("Unimplemented CPU throttle because of 3 Cell battery event detected\n");
break;
case HPWMI_LOCK_SWITCH:
break;
default:
- printk(KERN_INFO PREFIX "Unknown event_id - %d - 0x%x\n",
- event_id, event_data);
+ pr_info("Unknown event_id - %d - 0x%x\n", event_id, event_data);
break;
}
}
@@ -705,7 +697,7 @@
return err;
if (state.count > HPWMI_MAX_RFKILL2_DEVICES) {
- printk(KERN_WARNING PREFIX "unable to parse 0x1b query output\n");
+ pr_warn("unable to parse 0x1b query output\n");
return -EINVAL;
}
@@ -727,14 +719,14 @@
name = "hp-wwan";
break;
default:
- printk(KERN_WARNING PREFIX "unknown device type 0x%x\n",
- state.device[i].radio_type);
+ pr_warn("unknown device type 0x%x\n",
+ state.device[i].radio_type);
continue;
}
if (!state.device[i].vendor_id) {
- printk(KERN_WARNING PREFIX "zero device %d while %d "
- "reported\n", i, state.count);
+ pr_warn("zero device %d while %d reported\n",
+ i, state.count);
continue;
}
@@ -755,8 +747,7 @@
IS_HWBLOCKED(state.device[i].power));
if (!(state.device[i].power & HPWMI_POWER_BIOS))
- printk(KERN_INFO PREFIX "device %s blocked by BIOS\n",
- name);
+ pr_info("device %s blocked by BIOS\n", name);
err = rfkill_register(rfkill);
if (err) {
diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c
index b1396e5..811d436 100644
--- a/drivers/platform/x86/ibm_rtl.c
+++ b/drivers/platform/x86/ibm_rtl.c
@@ -22,6 +22,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/module.h>
@@ -69,9 +71,10 @@
#define RTL_SIGNATURE 0x0000005f4c54525fULL
#define RTL_MASK 0x000000ffffffffffULL
-#define RTL_DEBUG(A, ...) do { \
- if (debug) \
- pr_info("ibm-rtl: " A, ##__VA_ARGS__ ); \
+#define RTL_DEBUG(fmt, ...) \
+do { \
+ if (debug) \
+ pr_info(fmt, ##__VA_ARGS__); \
} while (0)
static DEFINE_MUTEX(rtl_lock);
@@ -114,7 +117,7 @@
int ret = 0, count = 0;
static u32 cmd_port_val;
- RTL_DEBUG("%s(%d)\n", __FUNCTION__, value);
+ RTL_DEBUG("%s(%d)\n", __func__, value);
value = value == 1 ? RTL_CMD_ENTER_PRTM : RTL_CMD_EXIT_PRTM;
@@ -144,8 +147,8 @@
while (ioread8(&rtl_table->command)) {
msleep(10);
if (count++ > 500) {
- pr_err("ibm-rtl: Hardware not responding to "
- "mode switch request\n");
+ pr_err("Hardware not responding to "
+ "mode switch request\n");
ret = -EIO;
break;
}
@@ -250,7 +253,7 @@
int ret = -ENODEV, i;
if (force)
- pr_warning("ibm-rtl: module loaded by force\n");
+ pr_warn("module loaded by force\n");
/* first ensure that we are running on IBM HW */
else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table))
return -ENODEV;
@@ -288,19 +291,19 @@
if ((readq(&tmp->signature) & RTL_MASK) == RTL_SIGNATURE) {
phys_addr_t addr;
unsigned int plen;
- RTL_DEBUG("found RTL_SIGNATURE at %#llx\n", (u64)tmp);
+ RTL_DEBUG("found RTL_SIGNATURE at %p\n", tmp);
rtl_table = tmp;
/* The address, value, width and offset are platform
* dependent and found in the ibm_rtl_table */
rtl_cmd_width = ioread8(&rtl_table->cmd_granularity);
rtl_cmd_type = ioread8(&rtl_table->cmd_address_type);
RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n",
- rtl_cmd_width, rtl_cmd_type);
+ rtl_cmd_width, rtl_cmd_type);
addr = ioread32(&rtl_table->cmd_port_address);
RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr);
plen = rtl_cmd_width/sizeof(char);
rtl_cmd_addr = rtl_port_map(addr, plen);
- RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr);
+ RTL_DEBUG("rtl_cmd_addr = %p\n", rtl_cmd_addr);
if (!rtl_cmd_addr) {
ret = -ENOMEM;
break;
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 21b1018..bfdda33 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -20,6 +20,8 @@
* 02110-1301, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
index eacd5da..809adea 100644
--- a/drivers/platform/x86/intel_menlow.c
+++ b/drivers/platform/x86/intel_menlow.c
@@ -27,6 +27,8 @@
* to get/set bandwidth.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -135,8 +137,7 @@
acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list,
&temp);
- printk(KERN_INFO
- "Bandwidth value was %ld: status is %d\n", state, status);
+ pr_info("Bandwidth value was %ld: status is %d\n", state, status);
if (ACPI_FAILURE(status))
return -EFAULT;
diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c
index 213e79b..f1ae507 100644
--- a/drivers/platform/x86/intel_mid_powerbtn.c
+++ b/drivers/platform/x86/intel_mid_powerbtn.c
@@ -23,58 +23,48 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+
#include <asm/intel_scu_ipc.h>
#define DRIVER_NAME "msic_power_btn"
-#define MSIC_IRQ_STAT 0x02
- #define MSIC_IRQ_PB (1 << 0)
-#define MSIC_PB_CONFIG 0x3e
#define MSIC_PB_STATUS 0x3f
- #define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */
-
-struct mfld_pb_priv {
- struct input_dev *input;
- unsigned int irq;
-};
+#define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */
static irqreturn_t mfld_pb_isr(int irq, void *dev_id)
{
- struct mfld_pb_priv *priv = dev_id;
+ struct input_dev *input = dev_id;
int ret;
u8 pbstat;
ret = intel_scu_ipc_ioread8(MSIC_PB_STATUS, &pbstat);
- if (ret < 0)
- return IRQ_HANDLED;
-
- input_event(priv->input, EV_KEY, KEY_POWER, !(pbstat & MSIC_PB_LEVEL));
- input_sync(priv->input);
+ if (ret < 0) {
+ dev_err(input->dev.parent, "Read error %d while reading"
+ " MSIC_PB_STATUS\n", ret);
+ } else {
+ input_event(input, EV_KEY, KEY_POWER,
+ !(pbstat & MSIC_PB_LEVEL));
+ input_sync(input);
+ }
return IRQ_HANDLED;
}
static int __devinit mfld_pb_probe(struct platform_device *pdev)
{
- struct mfld_pb_priv *priv;
struct input_dev *input;
- int irq;
+ int irq = platform_get_irq(pdev, 0);
int error;
- irq = platform_get_irq(pdev, 0);
if (irq < 0)
return -EINVAL;
- priv = kzalloc(sizeof(struct mfld_pb_priv), GFP_KERNEL);
input = input_allocate_device();
- if (!priv || !input) {
- error = -ENOMEM;
- goto err_free_mem;
+ if (!input) {
+ dev_err(&pdev->dev, "Input device allocation error\n");
+ return -ENOMEM;
}
- priv->input = input;
- priv->irq = irq;
-
input->name = pdev->name;
input->phys = "power-button/input0";
input->id.bustype = BUS_HOST;
@@ -82,42 +72,40 @@
input_set_capability(input, EV_KEY, KEY_POWER);
- error = request_threaded_irq(priv->irq, NULL, mfld_pb_isr,
- 0, DRIVER_NAME, priv);
+ error = request_threaded_irq(irq, NULL, mfld_pb_isr, 0,
+ DRIVER_NAME, input);
if (error) {
- dev_err(&pdev->dev,
- "unable to request irq %d for mfld power button\n",
- irq);
- goto err_free_mem;
+ dev_err(&pdev->dev, "Unable to request irq %d for mfld power"
+ "button\n", irq);
+ goto err_free_input;
}
error = input_register_device(input);
if (error) {
- dev_err(&pdev->dev,
- "unable to register input dev, error %d\n", error);
+ dev_err(&pdev->dev, "Unable to register input dev, error "
+ "%d\n", error);
goto err_free_irq;
}
- platform_set_drvdata(pdev, priv);
+ platform_set_drvdata(pdev, input);
return 0;
err_free_irq:
- free_irq(priv->irq, priv);
-err_free_mem:
+ free_irq(irq, input);
+err_free_input:
input_free_device(input);
- kfree(priv);
return error;
}
static int __devexit mfld_pb_remove(struct platform_device *pdev)
{
- struct mfld_pb_priv *priv = platform_get_drvdata(pdev);
+ struct input_dev *input = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
- free_irq(priv->irq, priv);
- input_unregister_device(priv->input);
- kfree(priv);
-
+ free_irq(irq, input);
+ input_unregister_device(input);
platform_set_drvdata(pdev, NULL);
+
return 0;
}
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index c2f4bd8..3a57832 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -37,49 +37,50 @@
#include <asm/intel_scu_ipc.h>
/* Number of thermal sensors */
-#define MSIC_THERMAL_SENSORS 4
+#define MSIC_THERMAL_SENSORS 4
/* ADC1 - thermal registers */
-#define MSIC_THERM_ADC1CNTL1 0x1C0
-#define MSIC_ADC_ENBL 0x10
-#define MSIC_ADC_START 0x08
+#define MSIC_THERM_ADC1CNTL1 0x1C0
+#define MSIC_ADC_ENBL 0x10
+#define MSIC_ADC_START 0x08
-#define MSIC_THERM_ADC1CNTL3 0x1C2
-#define MSIC_ADCTHERM_ENBL 0x04
-#define MSIC_ADCRRDATA_ENBL 0x05
-#define MSIC_CHANL_MASK_VAL 0x0F
+#define MSIC_THERM_ADC1CNTL3 0x1C2
+#define MSIC_ADCTHERM_ENBL 0x04
+#define MSIC_ADCRRDATA_ENBL 0x05
+#define MSIC_CHANL_MASK_VAL 0x0F
-#define MSIC_STOPBIT_MASK 16
-#define MSIC_ADCTHERM_MASK 4
-#define ADC_CHANLS_MAX 15 /* Number of ADC channels */
-#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
+#define MSIC_STOPBIT_MASK 16
+#define MSIC_ADCTHERM_MASK 4
+/* Number of ADC channels */
+#define ADC_CHANLS_MAX 15
+#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
/* ADC channel code values */
-#define SKIN_SENSOR0_CODE 0x08
-#define SKIN_SENSOR1_CODE 0x09
-#define SYS_SENSOR_CODE 0x0A
-#define MSIC_DIE_SENSOR_CODE 0x03
+#define SKIN_SENSOR0_CODE 0x08
+#define SKIN_SENSOR1_CODE 0x09
+#define SYS_SENSOR_CODE 0x0A
+#define MSIC_DIE_SENSOR_CODE 0x03
-#define SKIN_THERM_SENSOR0 0
-#define SKIN_THERM_SENSOR1 1
-#define SYS_THERM_SENSOR2 2
-#define MSIC_DIE_THERM_SENSOR3 3
+#define SKIN_THERM_SENSOR0 0
+#define SKIN_THERM_SENSOR1 1
+#define SYS_THERM_SENSOR2 2
+#define MSIC_DIE_THERM_SENSOR3 3
/* ADC code range */
-#define ADC_MAX 977
-#define ADC_MIN 162
-#define ADC_VAL0C 887
-#define ADC_VAL20C 720
-#define ADC_VAL40C 508
-#define ADC_VAL60C 315
+#define ADC_MAX 977
+#define ADC_MIN 162
+#define ADC_VAL0C 887
+#define ADC_VAL20C 720
+#define ADC_VAL40C 508
+#define ADC_VAL60C 315
/* ADC base addresses */
-#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */
-#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */
+#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */
+#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */
/* MSIC die attributes */
-#define MSIC_DIE_ADC_MIN 488
-#define MSIC_DIE_ADC_MAX 1004
+#define MSIC_DIE_ADC_MIN 488
+#define MSIC_DIE_ADC_MAX 1004
/* This holds the address of the first free ADC channel,
* among the 15 channels
@@ -87,15 +88,15 @@
static int channel_index;
struct platform_info {
- struct platform_device *pdev;
- struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
+ struct platform_device *pdev;
+ struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
};
struct thermal_device_info {
- unsigned int chnl_addr;
- int direct;
- /* This holds the current temperature in millidegree celsius */
- long curr_temp;
+ unsigned int chnl_addr;
+ int direct;
+ /* This holds the current temperature in millidegree celsius */
+ long curr_temp;
};
/**
@@ -106,7 +107,7 @@
*/
static int to_msic_die_temp(uint16_t adc_val)
{
- return (368 * (adc_val) / 1000) - 220;
+ return (368 * (adc_val) / 1000) - 220;
}
/**
@@ -118,7 +119,7 @@
*/
static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max)
{
- return (adc_val >= min) && (adc_val <= max);
+ return (adc_val >= min) && (adc_val <= max);
}
/**
@@ -136,35 +137,35 @@
*/
static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp)
{
- int temp;
+ int temp;
- /* Direct conversion for die temperature */
- if (direct) {
- if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
- *tp = to_msic_die_temp(adc_val) * 1000;
- return 0;
- }
- return -ERANGE;
- }
+ /* Direct conversion for die temperature */
+ if (direct) {
+ if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
+ *tp = to_msic_die_temp(adc_val) * 1000;
+ return 0;
+ }
+ return -ERANGE;
+ }
- if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
- return -ERANGE;
+ if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
+ return -ERANGE;
- /* Linear approximation for skin temperature */
- if (adc_val > ADC_VAL0C)
- temp = 177 - (adc_val/5);
- else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
- temp = 111 - (adc_val/8);
- else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
- temp = 92 - (adc_val/10);
- else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
- temp = 91 - (adc_val/10);
- else
- temp = 112 - (adc_val/6);
+ /* Linear approximation for skin temperature */
+ if (adc_val > ADC_VAL0C)
+ temp = 177 - (adc_val/5);
+ else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
+ temp = 111 - (adc_val/8);
+ else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
+ temp = 92 - (adc_val/10);
+ else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
+ temp = 91 - (adc_val/10);
+ else
+ temp = 112 - (adc_val/6);
- /* Convert temperature in celsius to milli degree celsius */
- *tp = temp * 1000;
- return 0;
+ /* Convert temperature in celsius to milli degree celsius */
+ *tp = temp * 1000;
+ return 0;
}
/**
@@ -178,47 +179,47 @@
*/
static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
{
- struct thermal_device_info *td_info = tzd->devdata;
- uint16_t adc_val, addr;
- uint8_t data = 0;
- int ret;
- unsigned long curr_temp;
+ struct thermal_device_info *td_info = tzd->devdata;
+ uint16_t adc_val, addr;
+ uint8_t data = 0;
+ int ret;
+ unsigned long curr_temp;
- addr = td_info->chnl_addr;
+ addr = td_info->chnl_addr;
- /* Enable the msic for conversion before reading */
- ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
- if (ret)
- return ret;
+ /* Enable the msic for conversion before reading */
+ ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
+ if (ret)
+ return ret;
- /* Re-toggle the RRDATARD bit (temporary workaround) */
- ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
- if (ret)
- return ret;
+ /* Re-toggle the RRDATARD bit (temporary workaround) */
+ ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
+ if (ret)
+ return ret;
- /* Read the higher bits of data */
- ret = intel_scu_ipc_ioread8(addr, &data);
- if (ret)
- return ret;
+ /* Read the higher bits of data */
+ ret = intel_scu_ipc_ioread8(addr, &data);
+ if (ret)
+ return ret;
- /* Shift bits to accommodate the lower two data bits */
- adc_val = (data << 2);
- addr++;
+ /* Shift bits to accommodate the lower two data bits */
+ adc_val = (data << 2);
+ addr++;
- ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */
- if (ret)
- return ret;
+ ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */
+ if (ret)
+ return ret;
- /* Adding lower two bits to the higher bits */
- data &= 03;
- adc_val += data;
+ /* Adding lower two bits to the higher bits */
+ data &= 03;
+ adc_val += data;
- /* Convert ADC value to temperature */
- ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
- if (ret == 0)
- *temp = td_info->curr_temp = curr_temp;
- return ret;
+ /* Convert ADC value to temperature */
+ ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
+ if (ret == 0)
+ *temp = td_info->curr_temp = curr_temp;
+ return ret;
}
/**
@@ -231,22 +232,21 @@
*/
static int configure_adc(int val)
{
- int ret;
- uint8_t data;
+ int ret;
+ uint8_t data;
- ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
- if (ret)
- return ret;
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
+ if (ret)
+ return ret;
- if (val) {
- /* Enable and start the ADC */
- data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
- } else {
- /* Just stop the ADC */
- data &= (~MSIC_ADC_START);
- }
-
- return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data);
+ if (val) {
+ /* Enable and start the ADC */
+ data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
+ } else {
+ /* Just stop the ADC */
+ data &= (~MSIC_ADC_START);
+ }
+ return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data);
}
/**
@@ -259,30 +259,30 @@
*/
static int set_up_therm_channel(u16 base_addr)
{
- int ret;
+ int ret;
- /* Enable all the sensor channels */
- ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE);
- if (ret)
- return ret;
+ /* Enable all the sensor channels */
+ ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE);
+ if (ret)
+ return ret;
- ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE);
- if (ret)
- return ret;
+ ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE);
+ if (ret)
+ return ret;
- ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE);
- if (ret)
- return ret;
+ ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE);
+ if (ret)
+ return ret;
- /* Since this is the last channel, set the stop bit
- to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
- ret = intel_scu_ipc_iowrite8(base_addr + 3,
- (MSIC_DIE_SENSOR_CODE | 0x10));
- if (ret)
- return ret;
+ /* Since this is the last channel, set the stop bit
+ * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
+ ret = intel_scu_ipc_iowrite8(base_addr + 3,
+ (MSIC_DIE_SENSOR_CODE | 0x10));
+ if (ret)
+ return ret;
- /* Enable ADC and start it */
- return configure_adc(1);
+ /* Enable ADC and start it */
+ return configure_adc(1);
}
/**
@@ -293,13 +293,13 @@
*/
static int reset_stopbit(uint16_t addr)
{
- int ret;
- uint8_t data;
- ret = intel_scu_ipc_ioread8(addr, &data);
- if (ret)
- return ret;
- /* Set the stop bit to zero */
- return intel_scu_ipc_iowrite8(addr, (data & 0xEF));
+ int ret;
+ uint8_t data;
+ ret = intel_scu_ipc_ioread8(addr, &data);
+ if (ret)
+ return ret;
+ /* Set the stop bit to zero */
+ return intel_scu_ipc_iowrite8(addr, (data & 0xEF));
}
/**
@@ -317,30 +317,30 @@
*/
static int find_free_channel(void)
{
- int ret;
- int i;
- uint8_t data;
+ int ret;
+ int i;
+ uint8_t data;
- /* check whether ADC is enabled */
- ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
- if (ret)
- return ret;
+ /* check whether ADC is enabled */
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
+ if (ret)
+ return ret;
- if ((data & MSIC_ADC_ENBL) == 0)
- return 0;
+ if ((data & MSIC_ADC_ENBL) == 0)
+ return 0;
- /* ADC is already enabled; Looking for an empty channel */
- for (i = 0; i < ADC_CHANLS_MAX; i++) {
- ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data);
- if (ret)
- return ret;
+ /* ADC is already enabled; Looking for an empty channel */
+ for (i = 0; i < ADC_CHANLS_MAX; i++) {
+ ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data);
+ if (ret)
+ return ret;
- if (data & MSIC_STOPBIT_MASK) {
- ret = i;
- break;
- }
- }
- return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
+ if (data & MSIC_STOPBIT_MASK) {
+ ret = i;
+ break;
+ }
+ }
+ return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
}
/**
@@ -351,48 +351,48 @@
*/
static int mid_initialize_adc(struct device *dev)
{
- u8 data;
- u16 base_addr;
- int ret;
+ u8 data;
+ u16 base_addr;
+ int ret;
- /*
- * Ensure that adctherm is disabled before we
- * initialize the ADC
- */
- ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data);
- if (ret)
- return ret;
+ /*
+ * Ensure that adctherm is disabled before we
+ * initialize the ADC
+ */
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data);
+ if (ret)
+ return ret;
- if (data & MSIC_ADCTHERM_MASK)
- dev_warn(dev, "ADCTHERM already set");
+ if (data & MSIC_ADCTHERM_MASK)
+ dev_warn(dev, "ADCTHERM already set");
- /* Index of the first channel in which the stop bit is set */
- channel_index = find_free_channel();
- if (channel_index < 0) {
- dev_err(dev, "No free ADC channels");
- return channel_index;
- }
+ /* Index of the first channel in which the stop bit is set */
+ channel_index = find_free_channel();
+ if (channel_index < 0) {
+ dev_err(dev, "No free ADC channels");
+ return channel_index;
+ }
- base_addr = ADC_CHNL_START_ADDR + channel_index;
+ base_addr = ADC_CHNL_START_ADDR + channel_index;
- if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
- /* Reset stop bit for channels other than 0 and 12 */
- ret = reset_stopbit(base_addr);
- if (ret)
- return ret;
+ if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
+ /* Reset stop bit for channels other than 0 and 12 */
+ ret = reset_stopbit(base_addr);
+ if (ret)
+ return ret;
- /* Index of the first free channel */
- base_addr++;
- channel_index++;
- }
+ /* Index of the first free channel */
+ base_addr++;
+ channel_index++;
+ }
- ret = set_up_therm_channel(base_addr);
- if (ret) {
- dev_err(dev, "unable to enable ADC");
- return ret;
- }
- dev_dbg(dev, "ADC initialization successful");
- return ret;
+ ret = set_up_therm_channel(base_addr);
+ if (ret) {
+ dev_err(dev, "unable to enable ADC");
+ return ret;
+ }
+ dev_dbg(dev, "ADC initialization successful");
+ return ret;
}
/**
@@ -403,18 +403,18 @@
*/
static struct thermal_device_info *initialize_sensor(int index)
{
- struct thermal_device_info *td_info =
- kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
+ struct thermal_device_info *td_info =
+ kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
- if (!td_info)
- return NULL;
+ if (!td_info)
+ return NULL;
- /* Set the base addr of the channel for this sensor */
- td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
- /* Sensor 3 is direct conversion */
- if (index == 3)
- td_info->direct = 1;
- return td_info;
+ /* Set the base addr of the channel for this sensor */
+ td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
+ /* Sensor 3 is direct conversion */
+ if (index == 3)
+ td_info->direct = 1;
+ return td_info;
}
/**
@@ -425,7 +425,7 @@
*/
static int mid_thermal_resume(struct platform_device *pdev)
{
- return mid_initialize_adc(&pdev->dev);
+ return mid_initialize_adc(&pdev->dev);
}
/**
@@ -437,12 +437,12 @@
*/
static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- /*
- * This just stops the ADC and does not disable it.
- * temporary workaround until we have a generic ADC driver.
- * If 0 is passed, it disables the ADC.
- */
- return configure_adc(0);
+ /*
+ * This just stops the ADC and does not disable it.
+ * temporary workaround until we have a generic ADC driver.
+ * If 0 is passed, it disables the ADC.
+ */
+ return configure_adc(0);
}
/**
@@ -453,16 +453,15 @@
*/
static int read_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp)
{
- WARN_ON(tzd == NULL);
- return mid_read_temp(tzd, temp);
+ WARN_ON(tzd == NULL);
+ return mid_read_temp(tzd, temp);
}
/* Can't be const */
static struct thermal_zone_device_ops tzd_ops = {
- .get_temp = read_curr_temp,
+ .get_temp = read_curr_temp,
};
-
/**
* mid_thermal_probe - mfld thermal initialize
* @pdev: platform device structure
@@ -472,46 +471,45 @@
*/
static int mid_thermal_probe(struct platform_device *pdev)
{
- static char *name[MSIC_THERMAL_SENSORS] = {
- "skin0", "skin1", "sys", "msicdie"
- };
+ static char *name[MSIC_THERMAL_SENSORS] = {
+ "skin0", "skin1", "sys", "msicdie"
+ };
- int ret;
- int i;
- struct platform_info *pinfo;
+ int ret;
+ int i;
+ struct platform_info *pinfo;
- pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
- if (!pinfo)
- return -ENOMEM;
+ pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
- /* Initializing the hardware */
- ret = mid_initialize_adc(&pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "ADC init failed");
- kfree(pinfo);
- return ret;
- }
+ /* Initializing the hardware */
+ ret = mid_initialize_adc(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "ADC init failed");
+ kfree(pinfo);
+ return ret;
+ }
- /* Register each sensor with the generic thermal framework*/
- for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
- pinfo->tzd[i] = thermal_zone_device_register(name[i],
- 0, initialize_sensor(i),
- &tzd_ops, 0, 0, 0, 0);
- if (IS_ERR(pinfo->tzd[i]))
- goto reg_fail;
- }
+ /* Register each sensor with the generic thermal framework*/
+ for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
+ pinfo->tzd[i] = thermal_zone_device_register(name[i],
+ 0, initialize_sensor(i), &tzd_ops, 0, 0, 0, 0);
+ if (IS_ERR(pinfo->tzd[i]))
+ goto reg_fail;
+ }
- pinfo->pdev = pdev;
- platform_set_drvdata(pdev, pinfo);
- return 0;
+ pinfo->pdev = pdev;
+ platform_set_drvdata(pdev, pinfo);
+ return 0;
reg_fail:
- ret = PTR_ERR(pinfo->tzd[i]);
- while (--i >= 0)
- thermal_zone_device_unregister(pinfo->tzd[i]);
- configure_adc(0);
- kfree(pinfo);
- return ret;
+ ret = PTR_ERR(pinfo->tzd[i]);
+ while (--i >= 0)
+ thermal_zone_device_unregister(pinfo->tzd[i]);
+ configure_adc(0);
+ kfree(pinfo);
+ return ret;
}
/**
@@ -523,49 +521,46 @@
*/
static int mid_thermal_remove(struct platform_device *pdev)
{
- int i;
- struct platform_info *pinfo = platform_get_drvdata(pdev);
+ int i;
+ struct platform_info *pinfo = platform_get_drvdata(pdev);
- for (i = 0; i < MSIC_THERMAL_SENSORS; i++)
- thermal_zone_device_unregister(pinfo->tzd[i]);
+ for (i = 0; i < MSIC_THERMAL_SENSORS; i++)
+ thermal_zone_device_unregister(pinfo->tzd[i]);
- platform_set_drvdata(pdev, NULL);
+ kfree(pinfo);
+ platform_set_drvdata(pdev, NULL);
- /* Stop the ADC */
- return configure_adc(0);
+ /* Stop the ADC */
+ return configure_adc(0);
}
-/*********************************************************************
- * Driver initialisation and finalization
- *********************************************************************/
-
#define DRIVER_NAME "msic_sensor"
static const struct platform_device_id therm_id_table[] = {
- { DRIVER_NAME, 1 },
- { }
+ { DRIVER_NAME, 1 },
+ { }
};
static struct platform_driver mid_thermal_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = mid_thermal_probe,
- .suspend = mid_thermal_suspend,
- .resume = mid_thermal_resume,
- .remove = __devexit_p(mid_thermal_remove),
- .id_table = therm_id_table,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = mid_thermal_probe,
+ .suspend = mid_thermal_suspend,
+ .resume = mid_thermal_resume,
+ .remove = __devexit_p(mid_thermal_remove),
+ .id_table = therm_id_table,
};
static int __init mid_thermal_module_init(void)
{
- return platform_driver_register(&mid_thermal_driver);
+ return platform_driver_register(&mid_thermal_driver);
}
static void __exit mid_thermal_module_exit(void)
{
- platform_driver_unregister(&mid_thermal_driver);
+ platform_driver_unregister(&mid_thermal_driver);
}
module_init(mid_thermal_module_init);
diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c
new file mode 100644
index 0000000..e936364
--- /dev/null
+++ b/drivers/platform/x86/intel_oaktrail.c
@@ -0,0 +1,396 @@
+/*
+ * intel_oaktrail.c - Intel OakTrail Platform support.
+ *
+ * Copyright (C) 2010-2011 Intel Corporation
+ * Author: Yin Kangkai (kangkai.yin@intel.com)
+ *
+ * based on Compal driver, Copyright (C) 2008 Cezary Jackiewicz
+ * <cezary.jackiewicz (at) gmail.com>, based on MSI driver
+ * Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * This driver does below things:
+ * 1. registers itself in the Linux backlight control in
+ * /sys/class/backlight/intel_oaktrail/
+ *
+ * 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/
+ * for these components: wifi, bluetooth, wwan (3g), gps
+ *
+ * This driver might work on other products based on Oaktrail. If you
+ * want to try it you can pass force=1 as argument to the module which
+ * will force it to load even when the DMI data doesn't identify the
+ * product as compatible.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
+#include <linux/dmi.h>
+#include <linux/rfkill.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+
+#define DRIVER_NAME "intel_oaktrail"
+#define DRIVER_VERSION "0.4ac1"
+
+/*
+ * This is the devices status address in EC space, and the control bits
+ * definition:
+ *
+ * (1 << 0): Camera enable/disable, RW.
+ * (1 << 1): Bluetooth enable/disable, RW.
+ * (1 << 2): GPS enable/disable, RW.
+ * (1 << 3): WiFi enable/disable, RW.
+ * (1 << 4): WWAN (3G) enable/disalbe, RW.
+ * (1 << 5): Touchscreen enable/disable, Read Only.
+ */
+#define OT_EC_DEVICE_STATE_ADDRESS 0xD6
+
+#define OT_EC_CAMERA_MASK (1 << 0)
+#define OT_EC_BT_MASK (1 << 1)
+#define OT_EC_GPS_MASK (1 << 2)
+#define OT_EC_WIFI_MASK (1 << 3)
+#define OT_EC_WWAN_MASK (1 << 4)
+#define OT_EC_TS_MASK (1 << 5)
+
+/*
+ * This is the address in EC space and commands used to control LCD backlight:
+ *
+ * Two steps needed to change the LCD backlight:
+ * 1. write the backlight percentage into OT_EC_BL_BRIGHTNESS_ADDRESS;
+ * 2. write OT_EC_BL_CONTROL_ON_DATA into OT_EC_BL_CONTROL_ADDRESS.
+ *
+ * To read the LCD back light, just read out the value from
+ * OT_EC_BL_BRIGHTNESS_ADDRESS.
+ *
+ * LCD backlight brightness range: 0 - 100 (OT_EC_BL_BRIGHTNESS_MAX)
+ */
+#define OT_EC_BL_BRIGHTNESS_ADDRESS 0x44
+#define OT_EC_BL_BRIGHTNESS_MAX 100
+#define OT_EC_BL_CONTROL_ADDRESS 0x3A
+#define OT_EC_BL_CONTROL_ON_DATA 0x1A
+
+
+static int force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
+
+static struct platform_device *oaktrail_device;
+static struct backlight_device *oaktrail_bl_device;
+static struct rfkill *bt_rfkill;
+static struct rfkill *gps_rfkill;
+static struct rfkill *wifi_rfkill;
+static struct rfkill *wwan_rfkill;
+
+
+/* rfkill */
+static int oaktrail_rfkill_set(void *data, bool blocked)
+{
+ u8 value;
+ u8 result;
+ unsigned long radio = (unsigned long) data;
+
+ ec_read(OT_EC_DEVICE_STATE_ADDRESS, &result);
+
+ if (!blocked)
+ value = (u8) (result | radio);
+ else
+ value = (u8) (result & ~radio);
+
+ ec_write(OT_EC_DEVICE_STATE_ADDRESS, value);
+
+ return 0;
+}
+
+static const struct rfkill_ops oaktrail_rfkill_ops = {
+ .set_block = oaktrail_rfkill_set,
+};
+
+static struct rfkill *oaktrail_rfkill_new(char *name, enum rfkill_type type,
+ unsigned long mask)
+{
+ struct rfkill *rfkill_dev;
+ u8 value;
+ int err;
+
+ rfkill_dev = rfkill_alloc(name, &oaktrail_device->dev, type,
+ &oaktrail_rfkill_ops, (void *)mask);
+ if (!rfkill_dev)
+ return ERR_PTR(-ENOMEM);
+
+ ec_read(OT_EC_DEVICE_STATE_ADDRESS, &value);
+ rfkill_init_sw_state(rfkill_dev, (value & mask) != 1);
+
+ err = rfkill_register(rfkill_dev);
+ if (err) {
+ rfkill_destroy(rfkill_dev);
+ return ERR_PTR(err);
+ }
+
+ return rfkill_dev;
+}
+
+static inline void __oaktrail_rfkill_cleanup(struct rfkill *rf)
+{
+ if (rf) {
+ rfkill_unregister(rf);
+ rfkill_destroy(rf);
+ }
+}
+
+static void oaktrail_rfkill_cleanup(void)
+{
+ __oaktrail_rfkill_cleanup(wifi_rfkill);
+ __oaktrail_rfkill_cleanup(bt_rfkill);
+ __oaktrail_rfkill_cleanup(gps_rfkill);
+ __oaktrail_rfkill_cleanup(wwan_rfkill);
+}
+
+static int oaktrail_rfkill_init(void)
+{
+ int ret;
+
+ wifi_rfkill = oaktrail_rfkill_new("oaktrail-wifi",
+ RFKILL_TYPE_WLAN,
+ OT_EC_WIFI_MASK);
+ if (IS_ERR(wifi_rfkill)) {
+ ret = PTR_ERR(wifi_rfkill);
+ wifi_rfkill = NULL;
+ goto cleanup;
+ }
+
+ bt_rfkill = oaktrail_rfkill_new("oaktrail-bluetooth",
+ RFKILL_TYPE_BLUETOOTH,
+ OT_EC_BT_MASK);
+ if (IS_ERR(bt_rfkill)) {
+ ret = PTR_ERR(bt_rfkill);
+ bt_rfkill = NULL;
+ goto cleanup;
+ }
+
+ gps_rfkill = oaktrail_rfkill_new("oaktrail-gps",
+ RFKILL_TYPE_GPS,
+ OT_EC_GPS_MASK);
+ if (IS_ERR(gps_rfkill)) {
+ ret = PTR_ERR(gps_rfkill);
+ gps_rfkill = NULL;
+ goto cleanup;
+ }
+
+ wwan_rfkill = oaktrail_rfkill_new("oaktrail-wwan",
+ RFKILL_TYPE_WWAN,
+ OT_EC_WWAN_MASK);
+ if (IS_ERR(wwan_rfkill)) {
+ ret = PTR_ERR(wwan_rfkill);
+ wwan_rfkill = NULL;
+ goto cleanup;
+ }
+
+ return 0;
+
+cleanup:
+ oaktrail_rfkill_cleanup();
+ return ret;
+}
+
+
+/* backlight */
+static int get_backlight_brightness(struct backlight_device *b)
+{
+ u8 value;
+ ec_read(OT_EC_BL_BRIGHTNESS_ADDRESS, &value);
+
+ return value;
+}
+
+static int set_backlight_brightness(struct backlight_device *b)
+{
+ u8 percent = (u8) b->props.brightness;
+ if (percent < 0 || percent > OT_EC_BL_BRIGHTNESS_MAX)
+ return -EINVAL;
+
+ ec_write(OT_EC_BL_BRIGHTNESS_ADDRESS, percent);
+ ec_write(OT_EC_BL_CONTROL_ADDRESS, OT_EC_BL_CONTROL_ON_DATA);
+
+ return 0;
+}
+
+static const struct backlight_ops oaktrail_bl_ops = {
+ .get_brightness = get_backlight_brightness,
+ .update_status = set_backlight_brightness,
+};
+
+static int oaktrail_backlight_init(void)
+{
+ struct backlight_device *bd;
+ struct backlight_properties props;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX;
+ bd = backlight_device_register(DRIVER_NAME,
+ &oaktrail_device->dev, NULL,
+ &oaktrail_bl_ops,
+ &props);
+
+ if (IS_ERR(bd)) {
+ oaktrail_bl_device = NULL;
+ pr_warning("Unable to register backlight device\n");
+ return PTR_ERR(bd);
+ }
+
+ oaktrail_bl_device = bd;
+
+ bd->props.brightness = get_backlight_brightness(bd);
+ bd->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(bd);
+
+ return 0;
+}
+
+static void oaktrail_backlight_exit(void)
+{
+ if (oaktrail_bl_device)
+ backlight_device_unregister(oaktrail_bl_device);
+}
+
+static int __devinit oaktrail_probe(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int __devexit oaktrail_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver oaktrail_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = oaktrail_probe,
+ .remove = __devexit_p(oaktrail_remove)
+};
+
+static int dmi_check_cb(const struct dmi_system_id *id)
+{
+ pr_info("Identified model '%s'\n", id->ident);
+ return 0;
+}
+
+static struct dmi_system_id __initdata oaktrail_dmi_table[] = {
+ {
+ .ident = "OakTrail platform",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "OakTrail platform"),
+ },
+ .callback = dmi_check_cb
+ },
+ { }
+};
+
+static int __init oaktrail_init(void)
+{
+ int ret;
+
+ if (acpi_disabled) {
+ pr_err("ACPI needs to be enabled for this driver to work!\n");
+ return -ENODEV;
+ }
+
+ if (!force && !dmi_check_system(oaktrail_dmi_table)) {
+ pr_err("Platform not recognized (You could try the module's force-parameter)");
+ return -ENODEV;
+ }
+
+ ret = platform_driver_register(&oaktrail_driver);
+ if (ret) {
+ pr_warning("Unable to register platform driver\n");
+ goto err_driver_reg;
+ }
+
+ oaktrail_device = platform_device_alloc(DRIVER_NAME, -1);
+ if (!oaktrail_device) {
+ pr_warning("Unable to allocate platform device\n");
+ ret = -ENOMEM;
+ goto err_device_alloc;
+ }
+
+ ret = platform_device_add(oaktrail_device);
+ if (ret) {
+ pr_warning("Unable to add platform device\n");
+ goto err_device_add;
+ }
+
+ if (!acpi_video_backlight_support()) {
+ ret = oaktrail_backlight_init();
+ if (ret)
+ goto err_backlight;
+
+ } else
+ pr_info("Backlight controlled by ACPI video driver\n");
+
+ ret = oaktrail_rfkill_init();
+ if (ret) {
+ pr_warning("Setup rfkill failed\n");
+ goto err_rfkill;
+ }
+
+ pr_info("Driver "DRIVER_VERSION" successfully loaded\n");
+ return 0;
+
+err_rfkill:
+ oaktrail_backlight_exit();
+err_backlight:
+ platform_device_del(oaktrail_device);
+err_device_add:
+ platform_device_put(oaktrail_device);
+err_device_alloc:
+ platform_driver_unregister(&oaktrail_driver);
+err_driver_reg:
+
+ return ret;
+}
+
+static void __exit oaktrail_cleanup(void)
+{
+ oaktrail_backlight_exit();
+ oaktrail_rfkill_cleanup();
+ platform_device_unregister(oaktrail_device);
+ platform_driver_unregister(&oaktrail_driver);
+
+ pr_info("Driver unloaded\n");
+}
+
+module_init(oaktrail_init);
+module_exit(oaktrail_cleanup);
+
+MODULE_AUTHOR("Yin Kangkai (kangkai.yin@intel.com)");
+MODULE_DESCRIPTION("Intel Oaktrail Platform ACPI Extras");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("dmi:*:svnIntelCorporation:pnOakTrailplatform:*");
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
index 464bb3f..1686c1e 100644
--- a/drivers/platform/x86/intel_pmic_gpio.c
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -19,6 +19,8 @@
* Moorestown platform PMIC chip
*/
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
@@ -90,8 +92,7 @@
static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
if (offset > 8) {
- printk(KERN_ERR
- "%s: only pin 0-7 support input\n", __func__);
+ pr_err("only pin 0-7 support input\n");
return -1;/* we only have 8 GPIO can use as input */
}
return intel_scu_ipc_update_register(GPIO0 + offset,
@@ -116,8 +117,7 @@
value ? 1 << (offset - 16) : 0,
1 << (offset - 16));
else {
- printk(KERN_ERR
- "%s: invalid PMIC GPIO pin %d!\n", __func__, offset);
+ pr_err("invalid PMIC GPIO pin %d!\n", offset);
WARN_ON(1);
}
@@ -260,7 +260,7 @@
/* setting up SRAM mapping for GPIOINT register */
pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8);
if (!pg->gpiointr) {
- printk(KERN_ERR "%s: Can not map GPIOINT.\n", __func__);
+ pr_err("Can not map GPIOINT\n");
retval = -EINVAL;
goto err2;
}
@@ -281,13 +281,13 @@
pg->chip.dev = dev;
retval = gpiochip_add(&pg->chip);
if (retval) {
- printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
+ pr_err("Can not add pmic gpio chip\n");
goto err;
}
retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
if (retval) {
- printk(KERN_WARNING "pmic: Interrupt request failed\n");
+ pr_warn("Interrupt request failed\n");
goto err;
}
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 821ad7b..3ff629d 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -447,7 +447,7 @@
static int dmi_check_cb(const struct dmi_system_id *id)
{
- pr_info("Identified laptop model '%s'.\n", id->ident);
+ pr_info("Identified laptop model '%s'\n", id->ident);
return 1;
}
@@ -800,7 +800,7 @@
input_unregister_device(msi_laptop_input_dev);
}
-static int load_scm_model_init(struct platform_device *sdev)
+static int __init load_scm_model_init(struct platform_device *sdev)
{
u8 data;
int result;
@@ -875,8 +875,7 @@
/* Register backlight stuff */
if (acpi_video_backlight_support()) {
- pr_info("Brightness ignored, must be controlled "
- "by ACPI video driver\n");
+ pr_info("Brightness ignored, must be controlled by ACPI video driver\n");
} else {
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
@@ -930,7 +929,7 @@
if (auto_brightness != 2)
set_auto_brightness(auto_brightness);
- pr_info("driver "MSI_DRIVER_VERSION" successfully loaded.\n");
+ pr_info("driver " MSI_DRIVER_VERSION " successfully loaded\n");
return 0;
@@ -978,7 +977,7 @@
if (auto_brightness != 2)
set_auto_brightness(1);
- pr_info("driver unloaded.\n");
+ pr_info("driver unloaded\n");
}
module_init(msi_init);
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index d5419c9..c832e33 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -20,6 +20,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/input.h>
@@ -36,13 +37,10 @@
MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2");
#define DRV_NAME "msi-wmi"
-#define DRV_PFX DRV_NAME ": "
#define MSIWMI_BIOS_GUID "551A1F84-FBDD-4125-91DB-3EA8F44F1D45"
#define MSIWMI_EVENT_GUID "B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2"
-#define dprintk(msg...) pr_debug(DRV_PFX msg)
-
#define SCANCODE_BASE 0xD0
#define MSI_WMI_BRIGHTNESSUP SCANCODE_BASE
#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1)
@@ -78,7 +76,7 @@
if (!obj || obj->type != ACPI_TYPE_INTEGER) {
if (obj) {
- printk(KERN_ERR DRV_PFX "query block returned object "
+ pr_err("query block returned object "
"type: %d - buffer length:%d\n", obj->type,
obj->type == ACPI_TYPE_BUFFER ?
obj->buffer.length : 0);
@@ -97,8 +95,8 @@
struct acpi_buffer input = { sizeof(int), &value };
- dprintk("Going to set block of instance: %d - value: %d\n",
- instance, value);
+ pr_debug("Going to set block of instance: %d - value: %d\n",
+ instance, value);
status = wmi_set_block(MSIWMI_BIOS_GUID, instance, &input);
@@ -112,20 +110,19 @@
/* Instance 1 is "get backlight", cmp with DSDT */
err = msi_wmi_query_block(1, &ret);
if (err) {
- printk(KERN_ERR DRV_PFX "Could not query backlight: %d\n", err);
+ pr_err("Could not query backlight: %d\n", err);
return -EINVAL;
}
- dprintk("Get: Query block returned: %d\n", ret);
+ pr_debug("Get: Query block returned: %d\n", ret);
for (level = 0; level < ARRAY_SIZE(backlight_map); level++) {
if (backlight_map[level] == ret) {
- dprintk("Current backlight level: 0x%X - index: %d\n",
- backlight_map[level], level);
+ pr_debug("Current backlight level: 0x%X - index: %d\n",
+ backlight_map[level], level);
break;
}
}
if (level == ARRAY_SIZE(backlight_map)) {
- printk(KERN_ERR DRV_PFX "get: Invalid brightness value: 0x%X\n",
- ret);
+ pr_err("get: Invalid brightness value: 0x%X\n", ret);
return -EINVAL;
}
return level;
@@ -156,7 +153,7 @@
status = wmi_get_event_data(value, &response);
if (status != AE_OK) {
- printk(KERN_INFO DRV_PFX "bad event status 0x%x\n", status);
+ pr_info("bad event status 0x%x\n", status);
return;
}
@@ -164,7 +161,7 @@
if (obj && obj->type == ACPI_TYPE_INTEGER) {
int eventcode = obj->integer.value;
- dprintk("Eventcode: 0x%x\n", eventcode);
+ pr_debug("Eventcode: 0x%x\n", eventcode);
key = sparse_keymap_entry_from_scancode(msi_wmi_input_dev,
eventcode);
if (key) {
@@ -175,8 +172,8 @@
/* Ignore event if the same event happened in a 50 ms
timeframe -> Key press may result in 10-20 GPEs */
if (ktime_to_us(diff) < 1000 * 50) {
- dprintk("Suppressed key event 0x%X - "
- "Last press was %lld us ago\n",
+ pr_debug("Suppressed key event 0x%X - "
+ "Last press was %lld us ago\n",
key->code, ktime_to_us(diff));
return;
}
@@ -187,17 +184,16 @@
(!acpi_video_backlight_support() ||
(key->code != MSI_WMI_BRIGHTNESSUP &&
key->code != MSI_WMI_BRIGHTNESSDOWN))) {
- dprintk("Send key: 0x%X - "
- "Input layer keycode: %d\n", key->code,
- key->keycode);
+ pr_debug("Send key: 0x%X - "
+ "Input layer keycode: %d\n",
+ key->code, key->keycode);
sparse_keymap_report_entry(msi_wmi_input_dev,
key, 1, true);
}
} else
- printk(KERN_INFO "Unknown key pressed - %x\n",
- eventcode);
+ pr_info("Unknown key pressed - %x\n", eventcode);
} else
- printk(KERN_INFO DRV_PFX "Unknown event received\n");
+ pr_info("Unknown event received\n");
kfree(response.pointer);
}
@@ -238,8 +234,7 @@
int err;
if (!wmi_has_guid(MSIWMI_EVENT_GUID)) {
- printk(KERN_ERR
- "This machine doesn't have MSI-hotkeys through WMI\n");
+ pr_err("This machine doesn't have MSI-hotkeys through WMI\n");
return -ENODEV;
}
err = wmi_install_notify_handler(MSIWMI_EVENT_GUID,
@@ -270,7 +265,7 @@
backlight->props.brightness = err;
}
- dprintk("Event handler installed\n");
+ pr_debug("Event handler installed\n");
return 0;
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 6fe8cd6..bbd182e 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -42,6 +42,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -70,10 +72,10 @@
#include <linux/miscdevice.h>
#endif
-#define DRV_PFX "sony-laptop: "
-#define dprintk(msg...) do { \
- if (debug) \
- pr_warn(DRV_PFX msg); \
+#define dprintk(fmt, ...) \
+do { \
+ if (debug) \
+ pr_warn(fmt, ##__VA_ARGS__); \
} while (0)
#define SONY_LAPTOP_DRIVER_VERSION "0.6"
@@ -418,7 +420,7 @@
error = kfifo_alloc(&sony_laptop_input.fifo,
SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
if (error) {
- pr_err(DRV_PFX "kfifo_alloc failed\n");
+ pr_err("kfifo_alloc failed\n");
goto err_dec_users;
}
@@ -702,7 +704,7 @@
return 0;
}
- pr_warn(DRV_PFX "acpi_callreadfunc failed\n");
+ pr_warn("acpi_callreadfunc failed\n");
return -1;
}
@@ -728,8 +730,7 @@
if (status == AE_OK) {
if (result != NULL) {
if (out_obj.type != ACPI_TYPE_INTEGER) {
- pr_warn(DRV_PFX "acpi_evaluate_object bad "
- "return type\n");
+ pr_warn("acpi_evaluate_object bad return type\n");
return -1;
}
*result = out_obj.integer.value;
@@ -737,7 +738,7 @@
return 0;
}
- pr_warn(DRV_PFX "acpi_evaluate_object failed\n");
+ pr_warn("acpi_evaluate_object failed\n");
return -1;
}
@@ -961,7 +962,6 @@
static int sony_nc_get_brightness_ng(struct backlight_device *bd)
{
int result;
- int *handle = (int *)bl_get_data(bd);
struct sony_backlight_props *sdev =
(struct sony_backlight_props *)bl_get_data(bd);
@@ -973,7 +973,6 @@
static int sony_nc_update_status_ng(struct backlight_device *bd)
{
int value, result;
- int *handle = (int *)bl_get_data(bd);
struct sony_backlight_props *sdev =
(struct sony_backlight_props *)bl_get_data(bd);
@@ -1104,10 +1103,8 @@
}
if (!key_event->data)
- pr_info(DRV_PFX
- "Unknown event: 0x%x 0x%x\n",
- key_handle,
- ev);
+ pr_info("Unknown event: 0x%x 0x%x\n",
+ key_handle, ev);
else
sony_laptop_report_input_event(ev);
}
@@ -1128,7 +1125,7 @@
struct acpi_device_info *info;
if (ACPI_SUCCESS(acpi_get_object_info(handle, &info))) {
- pr_warn(DRV_PFX "method: name: %4.4s, args %X\n",
+ pr_warn("method: name: %4.4s, args %X\n",
(char *)&info->name, info->param_count);
kfree(info);
@@ -1169,7 +1166,7 @@
ret = acpi_callsetfunc(sony_nc_acpi_handle, *item->acpiset,
item->value, NULL);
if (ret < 0) {
- pr_err(DRV_PFX "%s: %d\n", __func__, ret);
+ pr_err("%s: %d\n", __func__, ret);
break;
}
}
@@ -1336,12 +1333,12 @@
device_enum = (union acpi_object *) buffer.pointer;
if (!device_enum) {
- pr_err(DRV_PFX "No SN06 return object.");
+ pr_err("No SN06 return object\n");
goto out_no_enum;
}
if (device_enum->type != ACPI_TYPE_BUFFER) {
- pr_err(DRV_PFX "Invalid SN06 return object 0x%.2x\n",
- device_enum->type);
+ pr_err("Invalid SN06 return object 0x%.2x\n",
+ device_enum->type);
goto out_no_enum;
}
@@ -1662,7 +1659,7 @@
ops, &props);
if (IS_ERR(sony_bl_props.dev)) {
- pr_warn(DRV_PFX "unable to register backlight device\n");
+ pr_warn("unable to register backlight device\n");
sony_bl_props.dev = NULL;
} else
sony_bl_props.dev->props.brightness =
@@ -1682,8 +1679,7 @@
acpi_handle handle;
struct sony_nc_value *item;
- pr_info(DRV_PFX "%s v%s.\n", SONY_NC_DRIVER_NAME,
- SONY_LAPTOP_DRIVER_VERSION);
+ pr_info("%s v%s\n", SONY_NC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
sony_nc_acpi_device = device;
strcpy(acpi_device_class(device), "sony/hotkey");
@@ -1708,7 +1704,7 @@
sony_nc_acpi_handle, 1, sony_walk_callback,
NULL, NULL, NULL);
if (ACPI_FAILURE(status)) {
- pr_warn(DRV_PFX "unable to walk acpi resources\n");
+ pr_warn("unable to walk acpi resources\n");
result = -ENODEV;
goto outpresent;
}
@@ -1736,13 +1732,12 @@
/* setup input devices and helper fifo */
result = sony_laptop_setup_input(device);
if (result) {
- pr_err(DRV_PFX "Unable to create input devices.\n");
+ pr_err("Unable to create input devices\n");
goto outkbdbacklight;
}
if (acpi_video_backlight_support()) {
- pr_info(DRV_PFX "brightness ignored, must be "
- "controlled by ACPI video driver\n");
+ pr_info("brightness ignored, must be controlled by ACPI video driver\n");
} else {
sony_nc_backlight_setup();
}
@@ -2265,9 +2260,9 @@
if (pcidev)
pci_dev_put(pcidev);
- pr_info(DRV_PFX "detected Type%d model\n",
- dev->model == SONYPI_DEVICE_TYPE1 ? 1 :
- dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
+ pr_info("detected Type%d model\n",
+ dev->model == SONYPI_DEVICE_TYPE1 ? 1 :
+ dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
}
/* camera tests and poweron/poweroff */
@@ -2313,7 +2308,7 @@
static int __sony_pic_camera_off(void)
{
if (!camera) {
- pr_warn(DRV_PFX "camera control not enabled\n");
+ pr_warn("camera control not enabled\n");
return -ENODEV;
}
@@ -2333,7 +2328,7 @@
int i, j, x;
if (!camera) {
- pr_warn(DRV_PFX "camera control not enabled\n");
+ pr_warn("camera control not enabled\n");
return -ENODEV;
}
@@ -2356,7 +2351,7 @@
}
if (j == 0) {
- pr_warn(DRV_PFX "failed to power on camera\n");
+ pr_warn("failed to power on camera\n");
return -ENODEV;
}
@@ -2412,8 +2407,7 @@
ITERATIONS_SHORT);
break;
default:
- pr_err(DRV_PFX "sony_pic_camera_command invalid: %d\n",
- command);
+ pr_err("sony_pic_camera_command invalid: %d\n", command);
break;
}
mutex_unlock(&spic_dev.lock);
@@ -2819,7 +2813,7 @@
error =
kfifo_alloc(&sonypi_compat.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
if (error) {
- pr_err(DRV_PFX "kfifo_alloc failed\n");
+ pr_err("kfifo_alloc failed\n");
return error;
}
@@ -2829,12 +2823,12 @@
sonypi_misc_device.minor = minor;
error = misc_register(&sonypi_misc_device);
if (error) {
- pr_err(DRV_PFX "misc_register failed\n");
+ pr_err("misc_register failed\n");
goto err_free_kfifo;
}
if (minor == -1)
- pr_info(DRV_PFX "device allocated minor is %d\n",
- sonypi_misc_device.minor);
+ pr_info("device allocated minor is %d\n",
+ sonypi_misc_device.minor);
return 0;
@@ -2893,8 +2887,8 @@
}
for (i = 0; i < p->interrupt_count; i++) {
if (!p->interrupts[i]) {
- pr_warn(DRV_PFX "Invalid IRQ %d\n",
- p->interrupts[i]);
+ pr_warn("Invalid IRQ %d\n",
+ p->interrupts[i]);
continue;
}
interrupt = kzalloc(sizeof(*interrupt),
@@ -2932,14 +2926,14 @@
ioport->io2.address_length);
}
else {
- pr_err(DRV_PFX "Unknown SPIC Type, more than 2 IO Ports\n");
+ pr_err("Unknown SPIC Type, more than 2 IO Ports\n");
return AE_ERROR;
}
return AE_OK;
}
default:
dprintk("Resource %d isn't an IRQ nor an IO port\n",
- resource->type);
+ resource->type);
case ACPI_RESOURCE_TYPE_END_TAG:
return AE_OK;
@@ -2960,7 +2954,7 @@
dprintk("Evaluating _STA\n");
result = acpi_bus_get_status(device);
if (result) {
- pr_warn(DRV_PFX "Unable to read status\n");
+ pr_warn("Unable to read status\n");
goto end;
}
@@ -2976,8 +2970,7 @@
status = acpi_walk_resources(device->handle, METHOD_NAME__PRS,
sony_pic_read_possible_resource, &spic_dev);
if (ACPI_FAILURE(status)) {
- pr_warn(DRV_PFX "Failure evaluating %s\n",
- METHOD_NAME__PRS);
+ pr_warn("Failure evaluating %s\n", METHOD_NAME__PRS);
result = -ENODEV;
}
end:
@@ -3090,7 +3083,7 @@
/* check for total failure */
if (ACPI_FAILURE(status)) {
- pr_err(DRV_PFX "Error evaluating _SRS\n");
+ pr_err("Error evaluating _SRS\n");
result = -ENODEV;
goto end;
}
@@ -3182,7 +3175,7 @@
struct sony_pic_irq *irq, *tmp_irq;
if (sony_pic_disable(device)) {
- pr_err(DRV_PFX "Couldn't disable device.\n");
+ pr_err("Couldn't disable device\n");
return -ENXIO;
}
@@ -3222,8 +3215,7 @@
struct sony_pic_ioport *io, *tmp_io;
struct sony_pic_irq *irq, *tmp_irq;
- pr_info(DRV_PFX "%s v%s.\n", SONY_PIC_DRIVER_NAME,
- SONY_LAPTOP_DRIVER_VERSION);
+ pr_info("%s v%s\n", SONY_PIC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
spic_dev.acpi_dev = device;
strcpy(acpi_device_class(device), "sony/hotkey");
@@ -3233,14 +3225,14 @@
/* read _PRS resources */
result = sony_pic_possible_resources(device);
if (result) {
- pr_err(DRV_PFX "Unable to read possible resources.\n");
+ pr_err("Unable to read possible resources\n");
goto err_free_resources;
}
/* setup input devices and helper fifo */
result = sony_laptop_setup_input(device);
if (result) {
- pr_err(DRV_PFX "Unable to create input devices.\n");
+ pr_err("Unable to create input devices\n");
goto err_free_resources;
}
@@ -3281,7 +3273,7 @@
}
}
if (!spic_dev.cur_ioport) {
- pr_err(DRV_PFX "Failed to request_region.\n");
+ pr_err("Failed to request_region\n");
result = -ENODEV;
goto err_remove_compat;
}
@@ -3301,7 +3293,7 @@
}
}
if (!spic_dev.cur_irq) {
- pr_err(DRV_PFX "Failed to request_irq.\n");
+ pr_err("Failed to request_irq\n");
result = -ENODEV;
goto err_release_region;
}
@@ -3309,7 +3301,7 @@
/* set resource status _SRS */
result = sony_pic_enable(device, spic_dev.cur_ioport, spic_dev.cur_irq);
if (result) {
- pr_err(DRV_PFX "Couldn't enable device.\n");
+ pr_err("Couldn't enable device\n");
goto err_free_irq;
}
@@ -3418,7 +3410,7 @@
if (!no_spic && dmi_check_system(sonypi_dmi_table)) {
result = acpi_bus_register_driver(&sony_pic_driver);
if (result) {
- pr_err(DRV_PFX "Unable to register SPIC driver.");
+ pr_err("Unable to register SPIC driver\n");
goto out;
}
spic_drv_registered = 1;
@@ -3426,7 +3418,7 @@
result = acpi_bus_register_driver(&sony_nc_driver);
if (result) {
- pr_err(DRV_PFX "Unable to register SNC driver.");
+ pr_err("Unable to register SNC driver\n");
goto out_unregister_pic;
}
diff --git a/drivers/platform/x86/tc1100-wmi.c b/drivers/platform/x86/tc1100-wmi.c
index 865ef78..e24f5ae 100644
--- a/drivers/platform/x86/tc1100-wmi.c
+++ b/drivers/platform/x86/tc1100-wmi.c
@@ -25,6 +25,8 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -40,9 +42,6 @@
#define TC1100_INSTANCE_WIRELESS 1
#define TC1100_INSTANCE_JOGDIAL 2
-#define TC1100_LOGPREFIX "tc1100-wmi: "
-#define TC1100_INFO KERN_INFO TC1100_LOGPREFIX
-
MODULE_AUTHOR("Jamey Hicks, Carlos Corbacho");
MODULE_DESCRIPTION("HP Compaq TC1100 Tablet WMI Extras");
MODULE_LICENSE("GPL");
@@ -264,7 +263,7 @@
if (error)
goto err_device_del;
- printk(TC1100_INFO "HP Compaq TC1100 Tablet WMI Extras loaded\n");
+ pr_info("HP Compaq TC1100 Tablet WMI Extras loaded\n");
return 0;
err_device_del:
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 562fcf0..77f6e70 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -21,6 +21,8 @@
* 02110-1301, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define TPACPI_VERSION "0.24"
#define TPACPI_SYSFS_VERSION 0x020700
@@ -224,17 +226,6 @@
#define TPACPI_MAX_ACPI_ARGS 3
-/* printk headers */
-#define TPACPI_LOG TPACPI_FILE ": "
-#define TPACPI_EMERG KERN_EMERG TPACPI_LOG
-#define TPACPI_ALERT KERN_ALERT TPACPI_LOG
-#define TPACPI_CRIT KERN_CRIT TPACPI_LOG
-#define TPACPI_ERR KERN_ERR TPACPI_LOG
-#define TPACPI_WARN KERN_WARNING TPACPI_LOG
-#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG
-#define TPACPI_INFO KERN_INFO TPACPI_LOG
-#define TPACPI_DEBUG KERN_DEBUG TPACPI_LOG
-
/* Debugging printk groups */
#define TPACPI_DBG_ALL 0xffff
#define TPACPI_DBG_DISCLOSETASK 0x8000
@@ -389,34 +380,36 @@
* Debugging helpers
*/
-#define dbg_printk(a_dbg_level, format, arg...) \
- do { if (dbg_level & (a_dbg_level)) \
- printk(TPACPI_DEBUG "%s: " format, __func__ , ## arg); \
- } while (0)
+#define dbg_printk(a_dbg_level, format, arg...) \
+do { \
+ if (dbg_level & (a_dbg_level)) \
+ printk(KERN_DEBUG pr_fmt("%s: " format), \
+ __func__, ##arg); \
+} while (0)
#ifdef CONFIG_THINKPAD_ACPI_DEBUG
#define vdbg_printk dbg_printk
static const char *str_supported(int is_supported);
#else
-#define vdbg_printk(a_dbg_level, format, arg...) \
- do { } while (0)
+static inline const char *str_supported(int is_supported) { return ""; }
+#define vdbg_printk(a_dbg_level, format, arg...) \
+ no_printk(format, ##arg)
#endif
static void tpacpi_log_usertask(const char * const what)
{
- printk(TPACPI_DEBUG "%s: access by process with PID %d\n",
- what, task_tgid_vnr(current));
+ printk(KERN_DEBUG pr_fmt("%s: access by process with PID %d\n"),
+ what, task_tgid_vnr(current));
}
-#define tpacpi_disclose_usertask(what, format, arg...) \
- do { \
- if (unlikely( \
- (dbg_level & TPACPI_DBG_DISCLOSETASK) && \
- (tpacpi_lifecycle == TPACPI_LIFE_RUNNING))) { \
- printk(TPACPI_DEBUG "%s: PID %d: " format, \
- what, task_tgid_vnr(current), ## arg); \
- } \
- } while (0)
+#define tpacpi_disclose_usertask(what, format, arg...) \
+do { \
+ if (unlikely((dbg_level & TPACPI_DBG_DISCLOSETASK) && \
+ (tpacpi_lifecycle == TPACPI_LIFE_RUNNING))) { \
+ printk(KERN_DEBUG pr_fmt("%s: PID %d: " format), \
+ what, task_tgid_vnr(current), ## arg); \
+ } \
+} while (0)
/*
* Quirk handling helpers
@@ -535,15 +528,6 @@
"HKEY", /* all others */
); /* 570 */
-TPACPI_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */
- "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */
- "\\_SB.PCI0.VID0", /* 770e */
- "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */
- "\\_SB.PCI0.AGP.VGA", /* X100e and a few others */
- "\\_SB.PCI0.AGP.VID", /* all others */
- ); /* R30, R31 */
-
-
/*************************************************************************
* ACPI helpers
*/
@@ -563,7 +547,7 @@
int quiet;
if (!*fmt) {
- printk(TPACPI_ERR "acpi_evalf() called with empty format\n");
+ pr_err("acpi_evalf() called with empty format\n");
return 0;
}
@@ -588,7 +572,7 @@
break;
/* add more types as needed */
default:
- printk(TPACPI_ERR "acpi_evalf() called "
+ pr_err("acpi_evalf() called "
"with invalid format character '%c'\n", c);
va_end(ap);
return 0;
@@ -617,13 +601,13 @@
break;
/* add more types as needed */
default:
- printk(TPACPI_ERR "acpi_evalf() called "
+ pr_err("acpi_evalf() called "
"with invalid format character '%c'\n", res_type);
return 0;
}
if (!success && !quiet)
- printk(TPACPI_ERR "acpi_evalf(%s, %s, ...) failed: %s\n",
+ pr_err("acpi_evalf(%s, %s, ...) failed: %s\n",
method, fmt0, acpi_format_exception(status));
return success;
@@ -767,8 +751,7 @@
rc = acpi_bus_get_device(*ibm->acpi->handle, &ibm->acpi->device);
if (rc < 0) {
- printk(TPACPI_ERR "acpi_bus_get_device(%s) failed: %d\n",
- ibm->name, rc);
+ pr_err("acpi_bus_get_device(%s) failed: %d\n", ibm->name, rc);
return -ENODEV;
}
@@ -781,12 +764,10 @@
ibm->acpi->type, dispatch_acpi_notify, ibm);
if (ACPI_FAILURE(status)) {
if (status == AE_ALREADY_EXISTS) {
- printk(TPACPI_NOTICE
- "another device driver is already "
- "handling %s events\n", ibm->name);
+ pr_notice("another device driver is already "
+ "handling %s events\n", ibm->name);
} else {
- printk(TPACPI_ERR
- "acpi_install_notify_handler(%s) failed: %s\n",
+ pr_err("acpi_install_notify_handler(%s) failed: %s\n",
ibm->name, acpi_format_exception(status));
}
return -ENODEV;
@@ -811,8 +792,7 @@
ibm->acpi->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
if (!ibm->acpi->driver) {
- printk(TPACPI_ERR
- "failed to allocate memory for ibm->acpi->driver\n");
+ pr_err("failed to allocate memory for ibm->acpi->driver\n");
return -ENOMEM;
}
@@ -823,7 +803,7 @@
rc = acpi_bus_register_driver(ibm->acpi->driver);
if (rc < 0) {
- printk(TPACPI_ERR "acpi_bus_register_driver(%s) failed: %d\n",
+ pr_err("acpi_bus_register_driver(%s) failed: %d\n",
ibm->name, rc);
kfree(ibm->acpi->driver);
ibm->acpi->driver = NULL;
@@ -1081,15 +1061,14 @@
static void tpacpi_disable_brightness_delay(void)
{
if (acpi_evalf(hkey_handle, NULL, "PWMS", "qvd", 0))
- printk(TPACPI_NOTICE
- "ACPI backlight control delay disabled\n");
+ pr_notice("ACPI backlight control delay disabled\n");
}
static void printk_deprecated_attribute(const char * const what,
const char * const details)
{
tpacpi_log_usertask("deprecated sysfs attribute");
- printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and "
+ pr_warn("WARNING: sysfs attribute %s is deprecated and "
"will be removed. %s\n",
what, details);
}
@@ -1264,8 +1243,7 @@
&tpacpi_rfk_rfkill_ops,
atp_rfk);
if (!atp_rfk || !atp_rfk->rfkill) {
- printk(TPACPI_ERR
- "failed to allocate memory for rfkill class\n");
+ pr_err("failed to allocate memory for rfkill class\n");
kfree(atp_rfk);
return -ENOMEM;
}
@@ -1275,9 +1253,8 @@
sw_status = (tp_rfkops->get_status)();
if (sw_status < 0) {
- printk(TPACPI_ERR
- "failed to read initial state for %s, error %d\n",
- name, sw_status);
+ pr_err("failed to read initial state for %s, error %d\n",
+ name, sw_status);
} else {
sw_state = (sw_status == TPACPI_RFK_RADIO_OFF);
if (set_default) {
@@ -1291,9 +1268,7 @@
res = rfkill_register(atp_rfk->rfkill);
if (res < 0) {
- printk(TPACPI_ERR
- "failed to register %s rfkill switch: %d\n",
- name, res);
+ pr_err("failed to register %s rfkill switch: %d\n", name, res);
rfkill_destroy(atp_rfk->rfkill);
kfree(atp_rfk);
return res;
@@ -1301,7 +1276,7 @@
tpacpi_rfkill_switches[id] = atp_rfk;
- printk(TPACPI_INFO "rfkill switch %s: radio is %sblocked\n",
+ pr_info("rfkill switch %s: radio is %sblocked\n",
name, (sw_state || hw_state) ? "" : "un");
return 0;
}
@@ -1825,10 +1800,8 @@
* broken, or really stable to begin with, so it is
* best if the user upgrades the firmware anyway.
*/
- printk(TPACPI_WARN
- "WARNING: Outdated ThinkPad BIOS/EC firmware\n");
- printk(TPACPI_WARN
- "WARNING: This firmware may be missing critical bug "
+ pr_warn("WARNING: Outdated ThinkPad BIOS/EC firmware\n");
+ pr_warn("WARNING: This firmware may be missing critical bug "
"fixes and/or important features\n");
}
}
@@ -2117,9 +2090,7 @@
(hotkey_all_mask | TPACPI_HKEY_NVRAM_KNOWN_MASK);
if (wantedmask)
- printk(TPACPI_NOTICE
- "required events 0x%08x not enabled!\n",
- wantedmask);
+ pr_notice("required events 0x%08x not enabled!\n", wantedmask);
}
/*
@@ -2157,10 +2128,9 @@
* a given event.
*/
if (!hotkey_mask_get() && !rc && (fwmask & ~hotkey_acpi_mask)) {
- printk(TPACPI_NOTICE
- "asked for hotkey mask 0x%08x, but "
- "firmware forced it to 0x%08x\n",
- fwmask, hotkey_acpi_mask);
+ pr_notice("asked for hotkey mask 0x%08x, but "
+ "firmware forced it to 0x%08x\n",
+ fwmask, hotkey_acpi_mask);
}
if (tpacpi_lifecycle != TPACPI_LIFE_EXITING)
@@ -2184,13 +2154,11 @@
(mask == 0xffff || mask == 0xffffff ||
mask == 0xffffffff)) {
tp_warned.hotkey_mask_ff = 1;
- printk(TPACPI_NOTICE
- "setting the hotkey mask to 0x%08x is likely "
- "not the best way to go about it\n", mask);
- printk(TPACPI_NOTICE
- "please consider using the driver defaults, "
- "and refer to up-to-date thinkpad-acpi "
- "documentation\n");
+ pr_notice("setting the hotkey mask to 0x%08x is likely "
+ "not the best way to go about it\n", mask);
+ pr_notice("please consider using the driver defaults, "
+ "and refer to up-to-date thinkpad-acpi "
+ "documentation\n");
}
/* Try to enable what the user asked for, plus whatever we need.
@@ -2574,8 +2542,7 @@
NULL, TPACPI_NVRAM_KTHREAD_NAME);
if (IS_ERR(tpacpi_hotkey_task)) {
tpacpi_hotkey_task = NULL;
- printk(TPACPI_ERR
- "could not create kernel thread "
+ pr_err("could not create kernel thread "
"for hotkey polling\n");
}
}
@@ -2583,11 +2550,10 @@
hotkey_poll_stop_sync();
if (may_warn && (poll_driver_mask || poll_user_mask) &&
hotkey_poll_freq == 0) {
- printk(TPACPI_NOTICE
- "hot keys 0x%08x and/or events 0x%08x "
- "require polling, which is currently "
- "disabled\n",
- poll_user_mask, poll_driver_mask);
+ pr_notice("hot keys 0x%08x and/or events 0x%08x "
+ "require polling, which is currently "
+ "disabled\n",
+ poll_user_mask, poll_driver_mask);
}
}
}
@@ -2811,13 +2777,13 @@
mutex_unlock(&hotkey_mutex);
if (rc < 0)
- printk(TPACPI_ERR "hotkey_source_mask: failed to update the"
- "firmware event mask!\n");
+ pr_err("hotkey_source_mask: "
+ "failed to update the firmware event mask!\n");
if (r_ev)
- printk(TPACPI_NOTICE "hotkey_source_mask: "
- "some important events were disabled: "
- "0x%04x\n", r_ev);
+ pr_notice("hotkey_source_mask: "
+ "some important events were disabled: 0x%04x\n",
+ r_ev);
tpacpi_disclose_usertask("hotkey_source_mask", "set to 0x%08lx\n", t);
@@ -3048,8 +3014,7 @@
if (((tp_features.hotkey_mask &&
hotkey_mask_set(hotkey_orig_mask)) |
hotkey_status_set(false)) != 0)
- printk(TPACPI_ERR
- "failed to restore hot key mask "
+ pr_err("failed to restore hot key mask "
"to BIOS defaults\n");
}
@@ -3288,10 +3253,9 @@
for HKEY interface version 0x100 */
if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
if ((hkeyv >> 8) != 1) {
- printk(TPACPI_ERR "unknown version of the "
- "HKEY interface: 0x%x\n", hkeyv);
- printk(TPACPI_ERR "please report this to %s\n",
- TPACPI_MAIL);
+ pr_err("unknown version of the HKEY interface: 0x%x\n",
+ hkeyv);
+ pr_err("please report this to %s\n", TPACPI_MAIL);
} else {
/*
* MHKV 0x100 in A31, R40, R40e,
@@ -3304,8 +3268,7 @@
/* Paranoia check AND init hotkey_all_mask */
if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
"MHKA", "qd")) {
- printk(TPACPI_ERR
- "missing MHKA handler, "
+ pr_err("missing MHKA handler, "
"please report this to %s\n",
TPACPI_MAIL);
/* Fallback: pre-init for FN+F3,F4,F12 */
@@ -3343,16 +3306,14 @@
if (dbg_wlswemul) {
tp_features.hotkey_wlsw = 1;
radiosw_state = !!tpacpi_wlsw_emulstate;
- printk(TPACPI_INFO
- "radio switch emulation enabled\n");
+ pr_info("radio switch emulation enabled\n");
} else
#endif
/* Not all thinkpads have a hardware radio switch */
if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
tp_features.hotkey_wlsw = 1;
radiosw_state = !!status;
- printk(TPACPI_INFO
- "radio switch found; radios are %s\n",
+ pr_info("radio switch found; radios are %s\n",
enabled(status, 0));
}
if (tp_features.hotkey_wlsw)
@@ -3363,8 +3324,7 @@
if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
tp_features.hotkey_tablet = 1;
tabletsw_state = !!(status & TP_HOTKEY_TABLET_MASK);
- printk(TPACPI_INFO
- "possible tablet mode switch found; "
+ pr_info("possible tablet mode switch found; "
"ThinkPad in %s mode\n",
(tabletsw_state) ? "tablet" : "laptop");
res = add_to_attr_set(hotkey_dev_attributes,
@@ -3382,8 +3342,7 @@
hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
GFP_KERNEL);
if (!hotkey_keycode_map) {
- printk(TPACPI_ERR
- "failed to allocate memory for key map\n");
+ pr_err("failed to allocate memory for key map\n");
res = -ENOMEM;
goto err_exit;
}
@@ -3426,13 +3385,11 @@
* userspace. tpacpi_detect_brightness_capabilities() must have
* been called before this point */
if (tp_features.bright_acpimode && acpi_video_backlight_support()) {
- printk(TPACPI_INFO
- "This ThinkPad has standard ACPI backlight "
- "brightness control, supported by the ACPI "
- "video driver\n");
- printk(TPACPI_NOTICE
- "Disabling thinkpad-acpi brightness events "
- "by default...\n");
+ pr_info("This ThinkPad has standard ACPI backlight "
+ "brightness control, supported by the ACPI "
+ "video driver\n");
+ pr_notice("Disabling thinkpad-acpi brightness events "
+ "by default...\n");
/* Disable brightness up/down on Lenovo thinkpads when
* ACPI is handling them, otherwise it is plain impossible
@@ -3539,8 +3496,7 @@
case TP_HKEY_EV_WKUP_S3_BATLOW: /* Battery on critical low level/S3 */
case TP_HKEY_EV_WKUP_S4_BATLOW: /* Battery on critical low level/S4 */
- printk(TPACPI_ALERT
- "EMERGENCY WAKEUP: battery almost empty\n");
+ pr_alert("EMERGENCY WAKEUP: battery almost empty\n");
/* how to auto-heal: */
/* 2313: woke up from S3, go to S4/S5 */
/* 2413: woke up from S4, go to S5 */
@@ -3551,9 +3507,7 @@
}
if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) {
- printk(TPACPI_INFO
- "woke up due to a hot-unplug "
- "request...\n");
+ pr_info("woke up due to a hot-unplug request...\n");
hotkey_wakeup_reason_notify_change();
}
return true;
@@ -3605,37 +3559,31 @@
switch (hkey) {
case TP_HKEY_EV_THM_TABLE_CHANGED:
- printk(TPACPI_INFO
- "EC reports that Thermal Table has changed\n");
+ pr_info("EC reports that Thermal Table has changed\n");
/* recommended action: do nothing, we don't have
* Lenovo ATM information */
return true;
case TP_HKEY_EV_ALARM_BAT_HOT:
- printk(TPACPI_CRIT
- "THERMAL ALARM: battery is too hot!\n");
+ pr_crit("THERMAL ALARM: battery is too hot!\n");
/* recommended action: warn user through gui */
break;
case TP_HKEY_EV_ALARM_BAT_XHOT:
- printk(TPACPI_ALERT
- "THERMAL EMERGENCY: battery is extremely hot!\n");
+ pr_alert("THERMAL EMERGENCY: battery is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
break;
case TP_HKEY_EV_ALARM_SENSOR_HOT:
- printk(TPACPI_CRIT
- "THERMAL ALARM: "
+ pr_crit("THERMAL ALARM: "
"a sensor reports something is too hot!\n");
/* recommended action: warn user through gui, that */
/* some internal component is too hot */
break;
case TP_HKEY_EV_ALARM_SENSOR_XHOT:
- printk(TPACPI_ALERT
- "THERMAL EMERGENCY: "
- "a sensor reports something is extremely hot!\n");
+ pr_alert("THERMAL EMERGENCY: "
+ "a sensor reports something is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
break;
default:
- printk(TPACPI_ALERT
- "THERMAL ALERT: unknown thermal alarm received\n");
+ pr_alert("THERMAL ALERT: unknown thermal alarm received\n");
known = false;
}
@@ -3652,8 +3600,7 @@
bool known_ev;
if (event != 0x80) {
- printk(TPACPI_ERR
- "unknown HKEY notification event %d\n", event);
+ pr_err("unknown HKEY notification event %d\n", event);
/* forward it to userspace, maybe it knows how to handle it */
acpi_bus_generate_netlink_event(
ibm->acpi->device->pnp.device_class,
@@ -3664,7 +3611,7 @@
while (1) {
if (!acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) {
- printk(TPACPI_ERR "failed to retrieve HKEY event\n");
+ pr_err("failed to retrieve HKEY event\n");
return;
}
@@ -3692,8 +3639,7 @@
switch (hkey) {
case TP_HKEY_EV_BAYEJ_ACK:
hotkey_autosleep_ack = 1;
- printk(TPACPI_INFO
- "bay ejected\n");
+ pr_info("bay ejected\n");
hotkey_wakeup_hotunplug_complete_notify_change();
known_ev = true;
break;
@@ -3709,8 +3655,7 @@
/* 0x4000-0x4FFF: dock-related wakeups */
if (hkey == TP_HKEY_EV_UNDOCK_ACK) {
hotkey_autosleep_ack = 1;
- printk(TPACPI_INFO
- "undocked\n");
+ pr_info("undocked\n");
hotkey_wakeup_hotunplug_complete_notify_change();
known_ev = true;
} else {
@@ -3741,11 +3686,9 @@
known_ev = false;
}
if (!known_ev) {
- printk(TPACPI_NOTICE
- "unhandled HKEY event 0x%04x\n", hkey);
- printk(TPACPI_NOTICE
- "please report the conditions when this "
- "event happened to %s\n", TPACPI_MAIL);
+ pr_notice("unhandled HKEY event 0x%04x\n", hkey);
+ pr_notice("please report the conditions when this "
+ "event happened to %s\n", TPACPI_MAIL);
}
/* Legacy events */
@@ -3778,8 +3721,7 @@
if (hotkey_status_set(true) < 0 ||
hotkey_mask_set(hotkey_acpi_mask) < 0)
- printk(TPACPI_ERR
- "error while attempting to reset the event "
+ pr_err("error while attempting to reset the event "
"firmware interface\n");
tpacpi_send_radiosw_update();
@@ -3824,14 +3766,12 @@
{
tpacpi_log_usertask("procfs hotkey enable/disable");
if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable),
- TPACPI_WARN
- "hotkey enable/disable functionality has been "
- "removed from the driver. Hotkeys are always "
- "enabled\n"))
- printk(TPACPI_ERR
- "Please remove the hotkey=enable module "
- "parameter, it is deprecated. Hotkeys are always "
- "enabled\n");
+ pr_fmt("hotkey enable/disable functionality has been "
+ "removed from the driver. "
+ "Hotkeys are always enabled.\n")))
+ pr_err("Please remove the hotkey=enable module "
+ "parameter, it is deprecated. "
+ "Hotkeys are always enabled.\n");
}
static int hotkey_write(char *buf)
@@ -4011,8 +3951,7 @@
/* Order firmware to save current state to NVRAM */
if (!acpi_evalf(NULL, NULL, "\\BLTH", "vd",
TP_ACPI_BLTH_SAVE_STATE))
- printk(TPACPI_NOTICE
- "failed to save bluetooth state to NVRAM\n");
+ pr_notice("failed to save bluetooth state to NVRAM\n");
else
vdbg_printk(TPACPI_DBG_RFKILL,
"bluestooth state saved to NVRAM\n");
@@ -4051,8 +3990,7 @@
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
if (dbg_bluetoothemul) {
tp_features.bluetooth = 1;
- printk(TPACPI_INFO
- "bluetooth switch emulation enabled\n");
+ pr_info("bluetooth switch emulation enabled\n");
} else
#endif
if (tp_features.bluetooth &&
@@ -4203,8 +4141,7 @@
/* Order firmware to save current state to NVRAM */
if (!acpi_evalf(NULL, NULL, "\\WGSV", "vd",
TP_ACPI_WGSV_SAVE_STATE))
- printk(TPACPI_NOTICE
- "failed to save WWAN state to NVRAM\n");
+ pr_notice("failed to save WWAN state to NVRAM\n");
else
vdbg_printk(TPACPI_DBG_RFKILL,
"WWAN state saved to NVRAM\n");
@@ -4241,8 +4178,7 @@
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
if (dbg_wwanemul) {
tp_features.wan = 1;
- printk(TPACPI_INFO
- "wwan switch emulation enabled\n");
+ pr_info("wwan switch emulation enabled\n");
} else
#endif
if (tp_features.wan &&
@@ -4382,8 +4318,7 @@
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
if (dbg_uwbemul) {
tp_features.uwb = 1;
- printk(TPACPI_INFO
- "uwb switch emulation enabled\n");
+ pr_info("uwb switch emulation enabled\n");
} else
#endif
if (tp_features.uwb &&
@@ -4444,6 +4379,15 @@
static int video_autosw_get(void);
static int video_autosw_set(int enable);
+TPACPI_HANDLE(vid, root,
+ "\\_SB.PCI.AGP.VGA", /* 570 */
+ "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */
+ "\\_SB.PCI0.VID0", /* 770e */
+ "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */
+ "\\_SB.PCI0.AGP.VGA", /* X100e and a few others */
+ "\\_SB.PCI0.AGP.VID", /* all others */
+ ); /* R30, R31 */
+
TPACPI_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */
static int __init video_init(struct ibm_init_struct *iibm)
@@ -4487,7 +4431,7 @@
dbg_printk(TPACPI_DBG_EXIT,
"restoring original video autoswitch mode\n");
if (video_autosw_set(video_orig_autosw))
- printk(TPACPI_ERR "error while trying to restore original "
+ pr_err("error while trying to restore original "
"video autoswitch mode\n");
}
@@ -4560,8 +4504,7 @@
res = acpi_evalf(vid_handle, NULL,
"ASWT", "vdd", status * 0x100, 0);
if (!autosw && video_autosw_set(autosw)) {
- printk(TPACPI_ERR
- "video auto-switch left enabled due to error\n");
+ pr_err("video auto-switch left enabled due to error\n");
return -EIO;
}
break;
@@ -4630,8 +4573,7 @@
return -ENOSYS;
}
if (!autosw && video_autosw_set(autosw)) {
- printk(TPACPI_ERR
- "video auto-switch left enabled due to error\n");
+ pr_err("video auto-switch left enabled due to error\n");
return -EIO;
}
@@ -5348,7 +5290,7 @@
tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
GFP_KERNEL);
if (!tpacpi_leds) {
- printk(TPACPI_ERR "Out of memory for LED data\n");
+ pr_err("Out of memory for LED data\n");
return -ENOMEM;
}
@@ -5367,9 +5309,8 @@
}
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
- printk(TPACPI_NOTICE
- "warning: userspace override of important "
- "firmware LEDs is enabled\n");
+ pr_notice("warning: userspace override of important "
+ "firmware LEDs is enabled\n");
#endif
return 0;
}
@@ -5639,17 +5580,16 @@
if (n <= 0)
return;
- printk(TPACPI_NOTICE
- "temperatures (Celsius):");
+ pr_notice("temperatures (Celsius):");
for (i = 0; i < n; i++) {
if (t.temp[i] != TPACPI_THERMAL_SENSOR_NA)
- printk(KERN_CONT " %d", (int)(t.temp[i] / 1000));
+ pr_cont(" %d", (int)(t.temp[i] / 1000));
else
- printk(KERN_CONT " N/A");
+ pr_cont(" N/A");
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
/* sysfs temp##_input -------------------------------------------------- */
@@ -5769,14 +5709,12 @@
if (ta1 == 0) {
/* This is sheer paranoia, but we handle it anyway */
if (acpi_tmp7) {
- printk(TPACPI_ERR
- "ThinkPad ACPI EC access misbehaving, "
+ pr_err("ThinkPad ACPI EC access misbehaving, "
"falling back to ACPI TMPx access "
"mode\n");
thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
} else {
- printk(TPACPI_ERR
- "ThinkPad ACPI EC access misbehaving, "
+ pr_err("ThinkPad ACPI EC access misbehaving, "
"disabling thermal sensors access\n");
thermal_read_mode = TPACPI_THERMAL_NONE;
}
@@ -6129,8 +6067,8 @@
if (ACPI_SUCCESS(acpi_evaluate_object(handle, "_BCL", NULL, &buffer))) {
obj = (union acpi_object *)buffer.pointer;
if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
- printk(TPACPI_ERR "Unknown _BCL data, "
- "please report this to %s\n", TPACPI_MAIL);
+ pr_err("Unknown _BCL data, please report this to %s\n",
+ TPACPI_MAIL);
rc = 0;
} else {
rc = obj->package.count;
@@ -6214,18 +6152,15 @@
switch (b) {
case 16:
bright_maxlvl = 15;
- printk(TPACPI_INFO
- "detected a 16-level brightness capable ThinkPad\n");
+ pr_info("detected a 16-level brightness capable ThinkPad\n");
break;
case 8:
case 0:
bright_maxlvl = 7;
- printk(TPACPI_INFO
- "detected a 8-level brightness capable ThinkPad\n");
+ pr_info("detected a 8-level brightness capable ThinkPad\n");
break;
default:
- printk(TPACPI_ERR
- "Unsupported brightness interface, "
+ pr_err("Unsupported brightness interface, "
"please contact %s\n", TPACPI_MAIL);
tp_features.bright_unkfw = 1;
bright_maxlvl = b - 1;
@@ -6260,22 +6195,19 @@
if (acpi_video_backlight_support()) {
if (brightness_enable > 1) {
- printk(TPACPI_INFO
- "Standard ACPI backlight interface "
- "available, not loading native one.\n");
+ pr_info("Standard ACPI backlight interface "
+ "available, not loading native one\n");
return 1;
} else if (brightness_enable == 1) {
- printk(TPACPI_WARN
- "Cannot enable backlight brightness support, "
+ pr_warn("Cannot enable backlight brightness support, "
"ACPI is already handling it. Refer to the "
- "acpi_backlight kernel parameter\n");
+ "acpi_backlight kernel parameter.\n");
return 1;
}
} else if (tp_features.bright_acpimode && brightness_enable > 1) {
- printk(TPACPI_NOTICE
- "Standard ACPI backlight interface not "
- "available, thinkpad_acpi native "
- "brightness control enabled\n");
+ pr_notice("Standard ACPI backlight interface not "
+ "available, thinkpad_acpi native "
+ "brightness control enabled\n");
}
/*
@@ -6319,19 +6251,17 @@
if (IS_ERR(ibm_backlight_device)) {
int rc = PTR_ERR(ibm_backlight_device);
ibm_backlight_device = NULL;
- printk(TPACPI_ERR "Could not register backlight device\n");
+ pr_err("Could not register backlight device\n");
return rc;
}
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness is supported\n");
if (quirks & TPACPI_BRGHT_Q_ASK) {
- printk(TPACPI_NOTICE
- "brightness: will use unverified default: "
- "brightness_mode=%d\n", brightness_mode);
- printk(TPACPI_NOTICE
- "brightness: please report to %s whether it works well "
- "or not on your ThinkPad\n", TPACPI_MAIL);
+ pr_notice("brightness: will use unverified default: "
+ "brightness_mode=%d\n", brightness_mode);
+ pr_notice("brightness: please report to %s whether it works well "
+ "or not on your ThinkPad\n", TPACPI_MAIL);
}
/* Added by mistake in early 2007. Probably useless, but it could
@@ -6804,8 +6734,7 @@
rc = snd_card_create(alsa_index, alsa_id, THIS_MODULE,
sizeof(struct tpacpi_alsa_data), &card);
if (rc < 0 || !card) {
- printk(TPACPI_ERR
- "Failed to create ALSA card structures: %d\n", rc);
+ pr_err("Failed to create ALSA card structures: %d\n", rc);
return 1;
}
@@ -6839,9 +6768,8 @@
ctl_vol = snd_ctl_new1(&volume_alsa_control_vol, NULL);
rc = snd_ctl_add(card, ctl_vol);
if (rc < 0) {
- printk(TPACPI_ERR
- "Failed to create ALSA volume control: %d\n",
- rc);
+ pr_err("Failed to create ALSA volume control: %d\n",
+ rc);
goto err_exit;
}
data->ctl_vol_id = &ctl_vol->id;
@@ -6850,8 +6778,7 @@
ctl_mute = snd_ctl_new1(&volume_alsa_control_mute, NULL);
rc = snd_ctl_add(card, ctl_mute);
if (rc < 0) {
- printk(TPACPI_ERR "Failed to create ALSA mute control: %d\n",
- rc);
+ pr_err("Failed to create ALSA mute control: %d\n", rc);
goto err_exit;
}
data->ctl_mute_id = &ctl_mute->id;
@@ -6859,7 +6786,7 @@
snd_card_set_dev(card, &tpacpi_pdev->dev);
rc = snd_card_register(card);
if (rc < 0) {
- printk(TPACPI_ERR "Failed to register ALSA card: %d\n", rc);
+ pr_err("Failed to register ALSA card: %d\n", rc);
goto err_exit;
}
@@ -6915,9 +6842,8 @@
return -EINVAL;
if (volume_mode == TPACPI_VOL_MODE_UCMS_STEP) {
- printk(TPACPI_ERR
- "UCMS step volume mode not implemented, "
- "please contact %s\n", TPACPI_MAIL);
+ pr_err("UCMS step volume mode not implemented, "
+ "please contact %s\n", TPACPI_MAIL);
return 1;
}
@@ -6981,13 +6907,11 @@
rc = volume_create_alsa_mixer();
if (rc) {
- printk(TPACPI_ERR
- "Could not create the ALSA mixer interface\n");
+ pr_err("Could not create the ALSA mixer interface\n");
return rc;
}
- printk(TPACPI_INFO
- "Console audio control enabled, mode: %s\n",
+ pr_info("Console audio control enabled, mode: %s\n",
(volume_control_allowed) ?
"override (read/write)" :
"monitor (read only)");
@@ -7049,12 +6973,10 @@
if (!volume_control_allowed && tpacpi_lifecycle != TPACPI_LIFE_INIT) {
if (unlikely(!tp_warned.volume_ctrl_forbidden)) {
tp_warned.volume_ctrl_forbidden = 1;
- printk(TPACPI_NOTICE
- "Console audio control in monitor mode, "
- "changes are not allowed.\n");
- printk(TPACPI_NOTICE
- "Use the volume_control=1 module parameter "
- "to enable volume control\n");
+ pr_notice("Console audio control in monitor mode, "
+ "changes are not allowed\n");
+ pr_notice("Use the volume_control=1 module parameter "
+ "to enable volume control\n");
}
return -EPERM;
}
@@ -7129,8 +7051,7 @@
static int __init volume_init(struct ibm_init_struct *iibm)
{
- printk(TPACPI_INFO
- "volume: disabled as there is no ALSA support in this kernel\n");
+ pr_info("volume: disabled as there is no ALSA support in this kernel\n");
return 1;
}
@@ -7337,9 +7258,8 @@
static void fan_quirk1_setup(void)
{
if (fan_control_initial_status == 0x07) {
- printk(TPACPI_NOTICE
- "fan_init: initial fan status is unknown, "
- "assuming it is in auto mode\n");
+ pr_notice("fan_init: initial fan status is unknown, "
+ "assuming it is in auto mode\n");
tp_features.fan_ctrl_status_undef = 1;
}
}
@@ -7726,8 +7646,7 @@
if (!queue_delayed_work(tpacpi_wq, &fan_watchdog_task,
msecs_to_jiffies(fan_watchdog_maxinterval
* 1000))) {
- printk(TPACPI_ERR
- "failed to queue the fan watchdog, "
+ pr_err("failed to queue the fan watchdog, "
"watchdog will not trigger\n");
}
} else
@@ -7741,11 +7660,11 @@
if (tpacpi_lifecycle != TPACPI_LIFE_RUNNING)
return;
- printk(TPACPI_NOTICE "fan watchdog: enabling fan\n");
+ pr_notice("fan watchdog: enabling fan\n");
rc = fan_set_enable();
if (rc < 0) {
- printk(TPACPI_ERR "fan watchdog: error %d while enabling fan, "
- "will try again later...\n", -rc);
+ pr_err("fan watchdog: error %d while enabling fan, "
+ "will try again later...\n", -rc);
/* reschedule for later */
fan_watchdog_reset();
}
@@ -8049,8 +7968,7 @@
"secondary fan support enabled\n");
}
} else {
- printk(TPACPI_ERR
- "ThinkPad ACPI EC access misbehaving, "
+ pr_err("ThinkPad ACPI EC access misbehaving, "
"fan status and control unavailable\n");
return 1;
}
@@ -8150,9 +8068,8 @@
fan_control_resume_level = 0;
rc = fan_get_status_safe(&fan_control_resume_level);
if (rc < 0)
- printk(TPACPI_NOTICE
- "failed to read fan level for later "
- "restore during resume: %d\n", rc);
+ pr_notice("failed to read fan level for later "
+ "restore during resume: %d\n", rc);
/* if it is undefined, don't attempt to restore it.
* KEEP THIS LAST */
@@ -8207,13 +8124,11 @@
return;
}
if (do_set) {
- printk(TPACPI_NOTICE
- "restoring fan level to 0x%02x\n",
- fan_control_resume_level);
+ pr_notice("restoring fan level to 0x%02x\n",
+ fan_control_resume_level);
rc = fan_set_level_safe(fan_control_resume_level);
if (rc < 0)
- printk(TPACPI_NOTICE
- "failed to restore fan level: %d\n", rc);
+ pr_notice("failed to restore fan level: %d\n", rc);
}
}
@@ -8305,8 +8220,8 @@
*rc = fan_set_level_safe(level);
if (*rc == -ENXIO)
- printk(TPACPI_ERR "level command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
+ pr_err("level command accepted for unsupported access mode %d\n",
+ fan_control_access_mode);
else if (!*rc)
tpacpi_disclose_usertask("procfs fan",
"set level to %d\n", level);
@@ -8321,8 +8236,8 @@
*rc = fan_set_enable();
if (*rc == -ENXIO)
- printk(TPACPI_ERR "enable command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
+ pr_err("enable command accepted for unsupported access mode %d\n",
+ fan_control_access_mode);
else if (!*rc)
tpacpi_disclose_usertask("procfs fan", "enable\n");
@@ -8336,8 +8251,8 @@
*rc = fan_set_disable();
if (*rc == -ENXIO)
- printk(TPACPI_ERR "disable command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
+ pr_err("disable command accepted for unsupported access mode %d\n",
+ fan_control_access_mode);
else if (!*rc)
tpacpi_disclose_usertask("procfs fan", "disable\n");
@@ -8356,8 +8271,8 @@
*rc = fan_set_speed(speed);
if (*rc == -ENXIO)
- printk(TPACPI_ERR "speed command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
+ pr_err("speed command accepted for unsupported access mode %d\n",
+ fan_control_access_mode);
else if (!*rc)
tpacpi_disclose_usertask("procfs fan",
"set speed to %d\n", speed);
@@ -8560,8 +8475,8 @@
if (ibm->acpi->notify) {
ret = setup_acpi_notify(ibm);
if (ret == -ENODEV) {
- printk(TPACPI_NOTICE "disabling subdriver %s\n",
- ibm->name);
+ pr_notice("disabling subdriver %s\n",
+ ibm->name);
ret = 0;
goto err_out;
}
@@ -8583,8 +8498,7 @@
entry = proc_create_data(ibm->name, mode, proc_dir,
&dispatch_proc_fops, ibm);
if (!entry) {
- printk(TPACPI_ERR "unable to create proc entry %s\n",
- ibm->name);
+ pr_err("unable to create proc entry %s\n", ibm->name);
ret = -ENODEV;
goto err_out;
}
@@ -8683,13 +8597,11 @@
tp->ec_release = (ec_fw_string[4] << 8)
| ec_fw_string[5];
} else {
- printk(TPACPI_NOTICE
- "ThinkPad firmware release %s "
- "doesn't match the known patterns\n",
- ec_fw_string);
- printk(TPACPI_NOTICE
- "please report this to %s\n",
- TPACPI_MAIL);
+ pr_notice("ThinkPad firmware release %s "
+ "doesn't match the known patterns\n",
+ ec_fw_string);
+ pr_notice("please report this to %s\n",
+ TPACPI_MAIL);
}
break;
}
@@ -8733,8 +8645,7 @@
tpacpi_acpi_handle_locate("ec", TPACPI_ACPI_EC_HID, &ec_handle);
if (!ec_handle) {
if (is_thinkpad)
- printk(TPACPI_ERR
- "Not yet supported ThinkPad detected!\n");
+ pr_err("Not yet supported ThinkPad detected!\n");
return -ENODEV;
}
@@ -8746,10 +8657,10 @@
static void __init thinkpad_acpi_init_banner(void)
{
- printk(TPACPI_INFO "%s v%s\n", TPACPI_DESC, TPACPI_VERSION);
- printk(TPACPI_INFO "%s\n", TPACPI_URL);
+ pr_info("%s v%s\n", TPACPI_DESC, TPACPI_VERSION);
+ pr_info("%s\n", TPACPI_URL);
- printk(TPACPI_INFO "ThinkPad BIOS %s, EC %s\n",
+ pr_info("ThinkPad BIOS %s, EC %s\n",
(thinkpad_id.bios_version_str) ?
thinkpad_id.bios_version_str : "unknown",
(thinkpad_id.ec_version_str) ?
@@ -8758,7 +8669,7 @@
BUG_ON(!thinkpad_id.vendor);
if (thinkpad_id.model_str)
- printk(TPACPI_INFO "%s %s, model %s\n",
+ pr_info("%s %s, model %s\n",
(thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ?
"IBM" : ((thinkpad_id.vendor ==
PCI_VENDOR_ID_LENOVO) ?
@@ -9024,8 +8935,7 @@
ret = get_thinkpad_model_data(&thinkpad_id);
if (ret) {
- printk(TPACPI_ERR
- "unable to get DMI data: %d\n", ret);
+ pr_err("unable to get DMI data: %d\n", ret);
thinkpad_acpi_module_exit();
return ret;
}
@@ -9051,16 +8961,14 @@
proc_dir = proc_mkdir(TPACPI_PROC_DIR, acpi_root_dir);
if (!proc_dir) {
- printk(TPACPI_ERR
- "unable to create proc dir " TPACPI_PROC_DIR);
+ pr_err("unable to create proc dir " TPACPI_PROC_DIR "\n");
thinkpad_acpi_module_exit();
return -ENODEV;
}
ret = platform_driver_register(&tpacpi_pdriver);
if (ret) {
- printk(TPACPI_ERR
- "unable to register main platform driver\n");
+ pr_err("unable to register main platform driver\n");
thinkpad_acpi_module_exit();
return ret;
}
@@ -9068,8 +8976,7 @@
ret = platform_driver_register(&tpacpi_hwmon_pdriver);
if (ret) {
- printk(TPACPI_ERR
- "unable to register hwmon platform driver\n");
+ pr_err("unable to register hwmon platform driver\n");
thinkpad_acpi_module_exit();
return ret;
}
@@ -9082,8 +8989,7 @@
&tpacpi_hwmon_pdriver.driver);
}
if (ret) {
- printk(TPACPI_ERR
- "unable to create sysfs driver attributes\n");
+ pr_err("unable to create sysfs driver attributes\n");
thinkpad_acpi_module_exit();
return ret;
}
@@ -9096,7 +9002,7 @@
if (IS_ERR(tpacpi_pdev)) {
ret = PTR_ERR(tpacpi_pdev);
tpacpi_pdev = NULL;
- printk(TPACPI_ERR "unable to register platform device\n");
+ pr_err("unable to register platform device\n");
thinkpad_acpi_module_exit();
return ret;
}
@@ -9106,16 +9012,14 @@
if (IS_ERR(tpacpi_sensors_pdev)) {
ret = PTR_ERR(tpacpi_sensors_pdev);
tpacpi_sensors_pdev = NULL;
- printk(TPACPI_ERR
- "unable to register hwmon platform device\n");
+ pr_err("unable to register hwmon platform device\n");
thinkpad_acpi_module_exit();
return ret;
}
ret = device_create_file(&tpacpi_sensors_pdev->dev,
&dev_attr_thinkpad_acpi_pdev_name);
if (ret) {
- printk(TPACPI_ERR
- "unable to create sysfs hwmon device attributes\n");
+ pr_err("unable to create sysfs hwmon device attributes\n");
thinkpad_acpi_module_exit();
return ret;
}
@@ -9124,14 +9028,14 @@
if (IS_ERR(tpacpi_hwmon)) {
ret = PTR_ERR(tpacpi_hwmon);
tpacpi_hwmon = NULL;
- printk(TPACPI_ERR "unable to register hwmon device\n");
+ pr_err("unable to register hwmon device\n");
thinkpad_acpi_module_exit();
return ret;
}
mutex_init(&tpacpi_inputdev_send_mutex);
tpacpi_inputdev = input_allocate_device();
if (!tpacpi_inputdev) {
- printk(TPACPI_ERR "unable to allocate input device\n");
+ pr_err("unable to allocate input device\n");
thinkpad_acpi_module_exit();
return -ENOMEM;
} else {
@@ -9163,7 +9067,7 @@
ret = input_register_device(tpacpi_inputdev);
if (ret < 0) {
- printk(TPACPI_ERR "unable to register input device\n");
+ pr_err("unable to register input device\n");
thinkpad_acpi_module_exit();
return ret;
} else {
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index 1d07d6d..4c20447 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -194,7 +194,7 @@
if (ret < 0)
return ret;
- printk(KERN_INFO "Topstar Laptop ACPI extras driver loaded\n");
+ pr_info("ACPI extras driver loaded\n");
return 0;
}
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 63f42a2..cb009b2 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -35,6 +35,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define TOSHIBA_ACPI_VERSION "0.19"
#define PROC_INTERFACE_VERSION 1
@@ -60,11 +62,6 @@
MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver");
MODULE_LICENSE("GPL");
-#define MY_LOGPREFIX "toshiba_acpi: "
-#define MY_ERR KERN_ERR MY_LOGPREFIX
-#define MY_NOTICE KERN_NOTICE MY_LOGPREFIX
-#define MY_INFO KERN_INFO MY_LOGPREFIX
-
/* Toshiba ACPI method paths */
#define METHOD_LCD_BRIGHTNESS "\\_SB_.PCI0.VGA_.LCD_._BCM"
#define TOSH_INTERFACE_1 "\\_SB_.VALD"
@@ -301,7 +298,7 @@
in[0] = 0xf100;
status = hci_raw(in, out);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "Illumination device not available\n");
+ pr_info("Illumination device not available\n");
return 0;
}
in[0] = 0xf400;
@@ -320,7 +317,7 @@
in[0] = 0xf100;
status = hci_raw(in, out);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "Illumination device not available\n");
+ pr_info("Illumination device not available\n");
return;
}
@@ -331,7 +328,7 @@
in[2] = 1;
status = hci_raw(in, out);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "ACPI call for illumination failed.\n");
+ pr_info("ACPI call for illumination failed\n");
return;
}
} else {
@@ -341,7 +338,7 @@
in[2] = 0;
status = hci_raw(in, out);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "ACPI call for illumination failed.\n");
+ pr_info("ACPI call for illumination failed.\n");
return;
}
}
@@ -364,7 +361,7 @@
in[0] = 0xf100;
status = hci_raw(in, out);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "Illumination device not available\n");
+ pr_info("Illumination device not available\n");
return LED_OFF;
}
@@ -373,7 +370,7 @@
in[1] = 0x14e;
status = hci_raw(in, out);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "ACPI call for illumination failed.\n");
+ pr_info("ACPI call for illumination failed.\n");
return LED_OFF;
}
@@ -517,7 +514,7 @@
seq_printf(m, "brightness_levels: %d\n",
HCI_LCD_BRIGHTNESS_LEVELS);
} else {
- printk(MY_ERR "Error reading LCD brightness\n");
+ pr_err("Error reading LCD brightness\n");
}
return 0;
@@ -592,7 +589,7 @@
seq_printf(m, "crt_out: %d\n", is_crt);
seq_printf(m, "tv_out: %d\n", is_tv);
} else {
- printk(MY_ERR "Error reading video out status\n");
+ pr_err("Error reading video out status\n");
}
return 0;
@@ -686,7 +683,7 @@
seq_printf(m, "running: %d\n", (value > 0));
seq_printf(m, "force_on: %d\n", force_fan);
} else {
- printk(MY_ERR "Error reading fan status\n");
+ pr_err("Error reading fan status\n");
}
return 0;
@@ -750,9 +747,9 @@
* some machines where system events sporadically
* become disabled. */
hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
- printk(MY_NOTICE "Re-enabled hotkeys\n");
+ pr_notice("Re-enabled hotkeys\n");
} else {
- printk(MY_ERR "Error reading hotkey status\n");
+ pr_err("Error reading hotkey status\n");
goto end;
}
}
@@ -863,7 +860,7 @@
if (!sparse_keymap_report_event(toshiba_acpi.hotkey_dev,
value, 1, true)) {
- printk(MY_INFO "Unknown key %x\n",
+ pr_info("Unknown key %x\n",
value);
}
} else if (hci_result == HCI_NOT_SUPPORTED) {
@@ -871,7 +868,7 @@
* some machines where system events sporadically
* become disabled. */
hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
- printk(MY_NOTICE "Re-enabled hotkeys\n");
+ pr_notice("Re-enabled hotkeys\n");
}
} while (hci_result != HCI_EMPTY);
}
@@ -883,13 +880,13 @@
status = acpi_get_handle(NULL, device, &toshiba_acpi.handle);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "Unable to get notification device\n");
+ pr_info("Unable to get notification device\n");
return -ENODEV;
}
toshiba_acpi.hotkey_dev = input_allocate_device();
if (!toshiba_acpi.hotkey_dev) {
- printk(MY_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
return -ENOMEM;
}
@@ -905,21 +902,21 @@
status = acpi_install_notify_handler(toshiba_acpi.handle,
ACPI_DEVICE_NOTIFY, toshiba_acpi_notify, NULL);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "Unable to install hotkey notification\n");
+ pr_info("Unable to install hotkey notification\n");
error = -ENODEV;
goto err_free_keymap;
}
status = acpi_evaluate_object(toshiba_acpi.handle, "ENAB", NULL, NULL);
if (ACPI_FAILURE(status)) {
- printk(MY_INFO "Unable to enable hotkeys\n");
+ pr_info("Unable to enable hotkeys\n");
error = -ENODEV;
goto err_remove_notify;
}
error = input_register_device(toshiba_acpi.hotkey_dev);
if (error) {
- printk(MY_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
goto err_remove_notify;
}
@@ -980,17 +977,17 @@
if (is_valid_acpi_path(TOSH_INTERFACE_1 GHCI_METHOD)) {
method_hci = TOSH_INTERFACE_1 GHCI_METHOD;
if (toshiba_acpi_setup_keyboard(TOSH_INTERFACE_1))
- printk(MY_INFO "Unable to activate hotkeys\n");
+ pr_info("Unable to activate hotkeys\n");
} else if (is_valid_acpi_path(TOSH_INTERFACE_2 GHCI_METHOD)) {
method_hci = TOSH_INTERFACE_2 GHCI_METHOD;
if (toshiba_acpi_setup_keyboard(TOSH_INTERFACE_2))
- printk(MY_INFO "Unable to activate hotkeys\n");
+ pr_info("Unable to activate hotkeys\n");
} else
return -ENODEV;
- printk(MY_INFO "Toshiba Laptop ACPI Extras version %s\n",
+ pr_info("Toshiba Laptop ACPI Extras version %s\n",
TOSHIBA_ACPI_VERSION);
- printk(MY_INFO " HCI method: %s\n", method_hci);
+ pr_info(" HCI method: %s\n", method_hci);
mutex_init(&toshiba_acpi.mutex);
@@ -998,7 +995,7 @@
-1, NULL, 0);
if (IS_ERR(toshiba_acpi.p_dev)) {
ret = PTR_ERR(toshiba_acpi.p_dev);
- printk(MY_ERR "unable to register platform device\n");
+ pr_err("unable to register platform device\n");
toshiba_acpi.p_dev = NULL;
toshiba_acpi_exit();
return ret;
@@ -1028,7 +1025,7 @@
if (IS_ERR(toshiba_backlight_device)) {
ret = PTR_ERR(toshiba_backlight_device);
- printk(KERN_ERR "Could not register toshiba backlight device\n");
+ pr_err("Could not register toshiba backlight device\n");
toshiba_backlight_device = NULL;
toshiba_acpi_exit();
return ret;
@@ -1042,14 +1039,14 @@
&toshiba_rfk_ops,
&toshiba_acpi);
if (!toshiba_acpi.bt_rfk) {
- printk(MY_ERR "unable to allocate rfkill device\n");
+ pr_err("unable to allocate rfkill device\n");
toshiba_acpi_exit();
return -ENOMEM;
}
ret = rfkill_register(toshiba_acpi.bt_rfk);
if (ret) {
- printk(MY_ERR "unable to register rfkill device\n");
+ pr_err("unable to register rfkill device\n");
rfkill_destroy(toshiba_acpi.bt_rfk);
toshiba_acpi_exit();
return ret;
diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
index 9440686..5fb7186 100644
--- a/drivers/platform/x86/toshiba_bluetooth.c
+++ b/drivers/platform/x86/toshiba_bluetooth.c
@@ -17,6 +17,8 @@
* delivered.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -70,14 +72,13 @@
if (!(result & 0x01))
return 0;
- printk(KERN_INFO "toshiba_bluetooth: Re-enabling Toshiba Bluetooth\n");
+ pr_info("Re-enabling Toshiba Bluetooth\n");
res1 = acpi_evaluate_object(handle, "AUSB", NULL, NULL);
res2 = acpi_evaluate_object(handle, "BTPO", NULL, NULL);
if (!ACPI_FAILURE(res1) || !ACPI_FAILURE(res2))
return 0;
- printk(KERN_WARNING "toshiba_bluetooth: Failed to re-enable "
- "Toshiba Bluetooth\n");
+ pr_warn("Failed to re-enable Toshiba Bluetooth\n");
return -ENODEV;
}
@@ -107,8 +108,8 @@
&bt_present);
if (!ACPI_FAILURE(status) && bt_present) {
- printk(KERN_INFO "Detected Toshiba ACPI Bluetooth device - "
- "installing RFKill handler\n");
+ pr_info("Detected Toshiba ACPI Bluetooth device - "
+ "installing RFKill handler\n");
result = toshiba_bluetooth_enable(device->handle);
}
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 05cc796..f23d5a8 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -486,16 +486,16 @@
pr_info("\tnotify_id: %02X\n", g->notify_id);
pr_info("\treserved: %02X\n", g->reserved);
pr_info("\tinstance_count: %d\n", g->instance_count);
- pr_info("\tflags: %#x ", g->flags);
+ pr_info("\tflags: %#x", g->flags);
if (g->flags) {
if (g->flags & ACPI_WMI_EXPENSIVE)
- pr_cont("ACPI_WMI_EXPENSIVE ");
+ pr_cont(" ACPI_WMI_EXPENSIVE");
if (g->flags & ACPI_WMI_METHOD)
- pr_cont("ACPI_WMI_METHOD ");
+ pr_cont(" ACPI_WMI_METHOD");
if (g->flags & ACPI_WMI_STRING)
- pr_cont("ACPI_WMI_STRING ");
+ pr_cont(" ACPI_WMI_STRING");
if (g->flags & ACPI_WMI_EVENT)
- pr_cont("ACPI_WMI_EVENT ");
+ pr_cont(" ACPI_WMI_EVENT");
}
pr_cont("\n");
diff --git a/drivers/platform/x86/xo15-ebook.c b/drivers/platform/x86/xo15-ebook.c
index c1372ed..fad153d 100644
--- a/drivers/platform/x86/xo15-ebook.c
+++ b/drivers/platform/x86/xo15-ebook.c
@@ -11,6 +11,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -20,7 +22,6 @@
#include <acpi/acpi_drivers.h>
#define MODULE_NAME "xo15-ebook"
-#define PREFIX MODULE_NAME ": "
#define XO15_EBOOK_CLASS MODULE_NAME
#define XO15_EBOOK_TYPE_UNKNOWN 0x00
@@ -105,7 +106,7 @@
class = acpi_device_class(device);
if (strcmp(hid, XO15_EBOOK_HID)) {
- printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
+ pr_err("Unsupported hid [%s]\n", hid);
error = -ENODEV;
goto err_free_input;
}