[PATCH] backlight: corgi_bl: Generalise to support other Sharp SL hardware
Generalise the Corgi backlight driver by moving the default intensity and
limit mask settings into the platform specific data structure. This enables
the driver to support other Zaurus hardware, specifically the SL-6000x (Tosa)
model.
Also change the spinlock to a mutex (the spinlock is overkill).
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 99604a5..d6d7260 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -141,6 +141,8 @@
*/
static struct corgibl_machinfo corgi_bl_machinfo = {
.max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.set_bl_intensity = corgi_bl_set_intensity,
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index ebe4730..19b372d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -220,6 +220,8 @@
* Spitz Backlight Device
*/
static struct corgibl_machinfo spitz_bl_machinfo = {
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.max_intensity = 0x2f,
};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 9d996f2..b895eaa 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -43,11 +43,11 @@
default y
config BACKLIGHT_CORGI
- tristate "Sharp Corgi Backlight Driver (SL-C7xx Series)"
+ tristate "Sharp Corgi Backlight Driver (SL Series)"
depends on BACKLIGHT_DEVICE && PXA_SHARPSL
default y
help
- If you have a Sharp Zaurus SL-C7xx, say y to enable the
+ If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the
backlight driver.
config BACKLIGHT_HP680
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index f86213b..2ebbfd9 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -1,7 +1,7 @@
/*
- * Backlight Driver for Sharp Corgi
+ * Backlight Driver for Sharp Zaurus Handhelds (various models)
*
- * Copyright (c) 2004-2005 Richard Purdie
+ * Copyright (c) 2004-2006 Richard Purdie
*
* Based on Sharp's 2.4 Backlight Driver
*
@@ -15,21 +15,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/fb.h>
#include <linux/backlight.h>
-
#include <asm/arch/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>
-#define CORGI_DEFAULT_INTENSITY 0x1f
-#define CORGI_LIMIT_MASK 0x0b
-
static int corgibl_intensity;
-static void (*corgibl_mach_set_intensity)(int intensity);
-static spinlock_t bl_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_MUTEX(bl_mutex);
static struct backlight_properties corgibl_data;
static struct backlight_device *corgi_backlight_device;
+static struct corgibl_machinfo *bl_machinfo;
static unsigned long corgibl_flags;
#define CORGIBL_SUSPENDED 0x01
@@ -37,7 +33,6 @@
static int corgibl_send_intensity(struct backlight_device *bd)
{
- unsigned long flags;
void (*corgi_kick_batt)(void);
int intensity = bd->props->brightness;
@@ -48,13 +43,11 @@
if (corgibl_flags & CORGIBL_SUSPENDED)
intensity = 0;
if (corgibl_flags & CORGIBL_BATTLOW)
- intensity &= CORGI_LIMIT_MASK;
+ intensity &= bl_machinfo->limit_mask;
- spin_lock_irqsave(&bl_lock, flags);
-
- corgibl_mach_set_intensity(intensity);
-
- spin_unlock_irqrestore(&bl_lock, flags);
+ mutex_lock(&bl_mutex);
+ bl_machinfo->set_bl_intensity(intensity);
+ mutex_unlock(&bl_mutex);
corgibl_intensity = intensity;
@@ -122,8 +115,10 @@
{
struct corgibl_machinfo *machinfo = pdev->dev.platform_data;
+ bl_machinfo = machinfo;
corgibl_data.max_brightness = machinfo->max_intensity;
- corgibl_mach_set_intensity = machinfo->set_bl_intensity;
+ if (!machinfo->limit_mask)
+ machinfo->limit_mask = -1;
corgi_backlight_device = backlight_device_register ("corgi-bl",
NULL, &corgibl_data);
@@ -131,7 +126,7 @@
return PTR_ERR (corgi_backlight_device);
corgibl_data.power = FB_BLANK_UNBLANK;
- corgibl_data.brightness = CORGI_DEFAULT_INTENSITY;
+ corgibl_data.brightness = machinfo->default_intensity;
corgibl_send_intensity(corgi_backlight_device);
printk("Corgi Backlight Driver Initialized.\n");
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
index 0b43495..94cb498 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/include/asm-arm/arch-pxa/sharpsl.h
@@ -27,6 +27,8 @@
*/
struct corgibl_machinfo {
int max_intensity;
+ int default_intensity;
+ int limit_mask;
void (*set_bl_intensity)(int intensity);
};
extern void corgibl_limit_intensity(int limit);