ide: use try_to_identify() in ide_driveid_update()
* Pass pointer to buffer for IDENTIFY data to do_identify()
and try_to_identify().
* Un-static try_to_identify() and use it in ide_driveid_update().
* Rename try_to_identify() to ide_dev_read_id().
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index affbc60..317c5da 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -289,66 +289,20 @@
int ide_driveid_update(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
u16 *id;
- unsigned long flags;
- int use_altstatus = 0, rc;
- u8 a, uninitialized_var(s);
+ int rc;
id = kmalloc(SECTOR_SIZE, GFP_ATOMIC);
if (id == NULL)
return 0;
- /*
- * Re-read drive->id for possible DMA mode
- * change (copied from ide-probe.c)
- */
-
SELECT_MASK(drive, 1);
- tp_ops->set_irq(hwif, 0);
- msleep(50);
-
- if (hwif->io_ports.ctl_addr &&
- (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
- a = tp_ops->read_altstatus(hwif);
- s = tp_ops->read_status(hwif);
- if ((a ^ s) & ~ATA_IDX)
- /* ancient Seagate drives, broken interfaces */
- printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
- "instead of ALTSTATUS(0x%02x)\n",
- drive->name, s, a);
- else
- /* use non-intrusive polling */
- use_altstatus = 1;
- }
-
- tp_ops->exec_command(hwif, ATA_CMD_ID_ATA);
-
- if (ide_busy_sleep(hwif, WAIT_WORSTCASE / 2, use_altstatus)) {
- rc = 1;
- goto out_err;
- }
-
- msleep(50); /* wait for IRQ and ATA_DRQ */
-
- s = tp_ops->read_status(hwif);
-
- if (!OK_STAT(s, ATA_DRQ, BAD_R_STAT)) {
- rc = 2;
- goto out_err;
- }
-
- local_irq_save(flags);
- tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);
- local_irq_restore(flags);
-
- (void)tp_ops->read_status(hwif); /* clear drive IRQ */
-
- ide_fix_driveid(id);
-
+ rc = ide_dev_read_id(drive, ATA_CMD_ID_ATA, id);
SELECT_MASK(drive, 0);
+ if (rc)
+ goto out_err;
+
drive->id[ATA_ID_UDMA_MODES] = id[ATA_ID_UDMA_MODES];
drive->id[ATA_ID_MWDMA_MODES] = id[ATA_ID_MWDMA_MODES];
drive->id[ATA_ID_SWDMA_MODES] = id[ATA_ID_SWDMA_MODES];
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 3f9faef..9740670 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -181,16 +181,16 @@
* do_identify - identify a drive
* @drive: drive to identify
* @cmd: command used
+ * @id: buffer for IDENTIFY data
*
* Called when we have issued a drive identify command to
* read and parse the results. This function is run with
* interrupts disabled.
*/
-static void do_identify(ide_drive_t *drive, u8 cmd)
+static void do_identify(ide_drive_t *drive, u8 cmd, u16 *id)
{
ide_hwif_t *hwif = drive->hwif;
- u16 *id = drive->id;
char *m = (char *)&id[ATA_ID_PROD];
unsigned long flags;
int bswap = 1;
@@ -240,19 +240,19 @@
}
/**
- * try_to_identify - send ATA/ATAPI identify
+ * ide_dev_read_id - send ATA/ATAPI IDENTIFY command
* @drive: drive to identify
* @cmd: command to use
+ * @id: buffer for IDENTIFY data
*
- * try_to_identify() sends an ATA(PI) IDENTIFY request to a drive
- * and waits for a response.
+ * Sends an ATA(PI) IDENTIFY request to a drive and waits for a response.
*
* Returns: 0 device was identified
* 1 device timed-out (no response to identify request)
* 2 device aborted the command (refused to identify itself)
*/
-static int try_to_identify(ide_drive_t *drive, u8 cmd)
+int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
@@ -312,7 +312,7 @@
if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) {
/* drive returned ID */
- do_identify(drive, cmd);
+ do_identify(drive, cmd, id);
/* drive responded with ID */
rc = 0;
/* clear drive IRQ */
@@ -378,6 +378,7 @@
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+ u16 *id = drive->id;
int rc;
u8 present = !!(drive->dev_flags & IDE_DFLAG_PRESENT), stat;
@@ -413,11 +414,10 @@
if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) ||
present || cmd == ATA_CMD_ID_ATAPI) {
- /* send cmd and wait */
- if ((rc = try_to_identify(drive, cmd))) {
+ rc = ide_dev_read_id(drive, cmd, id);
+ if (rc)
/* failed: try again */
- rc = try_to_identify(drive,cmd);
- }
+ rc = ide_dev_read_id(drive, cmd, id);
stat = tp_ops->read_status(hwif);
@@ -432,7 +432,7 @@
msleep(50);
tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
(void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0);
- rc = try_to_identify(drive, cmd);
+ rc = ide_dev_read_id(drive, cmd, id);
}
/* ensure drive IRQ is clear */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index bbce9b2..854eba8 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1235,6 +1235,8 @@
int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
+int ide_dev_read_id(ide_drive_t *, u8, u16 *);
+
extern int ide_driveid_update(ide_drive_t *);
extern int ide_config_drive_speed(ide_drive_t *, u8);
extern u8 eighty_ninty_three (ide_drive_t *);