diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 2f7fd43..9c27e51 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -102,9 +102,12 @@
 !Iinclude/linux/device.h
      </sect1>
      <sect1><title>Device Drivers Base</title>
+!Idrivers/base/init.c
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
+!Edrivers/base/syscore.c
 !Edrivers/base/class.c
+!Idrivers/base/node.c
 !Edrivers/base/firmware_class.c
 !Edrivers/base/transport_class.c
 <!-- Cannot be included, because
@@ -113,7 +116,7 @@
      exceed allowed 44 characters maximum
 X!Edrivers/base/attribute_container.c
 -->
-!Edrivers/base/sys.c
+!Edrivers/base/dd.c
 <!--
 X!Edrivers/base/interface.c
 -->
@@ -121,6 +124,11 @@
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
      </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
+     </sect1>
      <sect1><title>Device Drivers Power Management</title>
 !Edrivers/base/power/main.c
      </sect1>
@@ -219,7 +227,7 @@
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/tty/serial/8250/8250.c
   </chapter>
 
   <chapter id="fbdev">
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 10c64c8..41c0c5d 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -233,6 +233,10 @@
   6. List of managed interfaces
   -----------------------------
 
+MEM
+  devm_kzalloc()
+  devm_kfree()
+
 IO region
   devm_request_region()
   devm_request_mem_region()
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 1bea46a..a0ffac0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -510,3 +510,17 @@
 	convert to using pci_scan_root_bus() so they can supply a list of
 	bus resources when the bus is created.
 Who:	Bjorn Helgaas <bhelgaas@google.com>
+
+----------------------------
+
+What:	The CAP9 SoC family will be removed
+When:	3.4
+Files:	arch/arm/mach-at91/at91cap9.c
+	arch/arm/mach-at91/at91cap9_devices.c
+	arch/arm/mach-at91/include/mach/at91cap9.h
+	arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+	arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+	arch/arm/mach-at91/board-cap9adk.c
+Why:	The code is not actively maintained and platforms are now hard to find.
+Who:	Nicolas Ferre <nicolas.ferre@atmel.com>
+	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index 6727b92..150fd38 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -857,42 +857,41 @@
 
 ...
 {
-	.name "2bit"
+	.name = "2bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "4bit"
+	.name = "4bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "4bit"
+	.name = "4bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_2_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
-	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_2_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_3_grp",
@@ -995,7 +994,7 @@
 like this:
 
 {
-	.name "POWERMAP"
+	.name = "POWERMAP"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "power_func",
 	.hog_on_boot = true,
@@ -1025,7 +1024,7 @@
 
 foo_switch()
 {
-	struct pinmux pmx;
+	struct pinmux *pmx;
 
 	/* Enable on position A */
 	pmx = pinmux_get(&device, "spi0-pos-A");
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index 21fd05c..f0ab5cf 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -25,7 +25,8 @@
 
  - Send the patch, after verifying that it follows the above rules, to
    stable@vger.kernel.org.  You must note the upstream commit ID in the
-   changelog of your submission.
+   changelog of your submission, as well as the kernel version you wish
+   it to be applied to.
  - To have the patch automatically included in the stable tree, add the tag
      Cc: stable@vger.kernel.org
    in the sign-off area. Once the patch is merged it will be applied to
diff --git a/Documentation/virtual/00-INDEX b/Documentation/virtual/00-INDEX
index 8e60199..924bd46 100644
--- a/Documentation/virtual/00-INDEX
+++ b/Documentation/virtual/00-INDEX
@@ -4,8 +4,6 @@
 	- this file.
 kvm/
 	- Kernel Virtual Machine.  See also http://linux-kvm.org
-lguest/
-	- Extremely simple hypervisor for experimental/educational use.
 uml/
 	- User Mode Linux, builds/runs Linux kernel as a userspace program.
 virtio.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index 260d9c1..252972b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -159,7 +159,7 @@
 F:	drivers/net/ethernet/realtek/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
@@ -1783,9 +1783,9 @@
 
 CHAR and MISC DRIVERS
 M:	Arnd Bergmann <arnd@arndb.de>
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
-S:	Maintained
+S:	Supported
 F:	drivers/char/*
 F:	drivers/misc/*
 
@@ -2320,7 +2320,7 @@
 F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
@@ -2350,6 +2350,9 @@
 
 DRM DRIVERS FOR EXYNOS
 M:	Inki Dae <inki.dae@samsung.com>
+M:	Joonyoung Shim <jy0922.shim@samsung.com>
+M:	Seung-Woo Kim <sw0312.kim@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 F:	drivers/gpu/drm/exynos
@@ -4137,6 +4140,7 @@
 
 LogFS
 M:	Joern Engel <joern@logfs.org>
+M:	Prasad Joshi <prasadjoshi.linux@gmail.com>
 L:	logfs@logfs.org
 W:	logfs.org
 S:	Maintained
@@ -4278,13 +4282,6 @@
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
-MAX1668 TEMPERATURE SENSOR DRIVER
-M:	"David George" <david.george@ska.ac.za>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/max1668
-F:	drivers/hwmon/max1668.c
-
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
 L:	lm-sensors@lm-sensors.org
@@ -6279,15 +6276,15 @@
 F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org
-S:	Maintained
+S:	Supported
 
 STAGING SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 L:	devel@driverdev.osuosl.org
-S:	Maintained
+S:	Supported
 F:	drivers/staging/
 
 STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
@@ -6672,10 +6669,10 @@
 K:	^Subject:.*(?i)trivial
 
 TTY LAYER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
-S:	Maintained
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
-F:	drivers/tty/*
+F:	drivers/tty/
 F:	drivers/tty/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
@@ -6961,7 +6958,7 @@
 F:	drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@@ -6976,9 +6973,8 @@
 F:	drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
-W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*
 
@@ -7006,7 +7002,7 @@
 F:	drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
@@ -7093,7 +7089,7 @@
 
 USERSPACE I/O (UIO)
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
@@ -7368,6 +7364,7 @@
 F:	Documentation/hwmon/wm83??
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/leds/leds-wm83*.c
+F:	drivers/hwmon/wm83??-hwmon.c
 F:	drivers/input/misc/wm831x-on.c
 F:	drivers/input/touchscreen/wm831x-ts.c
 F:	drivers/input/touchscreen/wm97*.c
diff --git a/Makefile b/Makefile
index 71e6ed2..e3b23e8 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 24626b0..a48aecc 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -754,7 +754,7 @@
 	select ARCH_HAS_CPUFREQ
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
+	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
@@ -825,7 +825,6 @@
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -842,7 +841,6 @@
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SCHED_CLOCK
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index b2dc2dd..c47d619 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -41,6 +41,7 @@
 
 #include <asm/irq.h>
 #include <asm/exception.h>
+#include <asm/smp_plat.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
@@ -352,11 +353,7 @@
 	unsigned int gic_irqs = gic->gic_irqs;
 	struct irq_domain *domain = &gic->domain;
 	void __iomem *base = gic_data_dist_base(gic);
-	u32 cpu = 0;
-
-#ifdef CONFIG_SMP
-	cpu = cpu_logical_map(smp_processor_id());
-#endif
+	u32 cpu = cpu_logical_map(smp_processor_id());
 
 	cpumask = 1 << cpu;
 	cpumask |= cpumask << 8;
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index b6e65de..62f8095 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -237,7 +237,7 @@
  */
 #ifdef CONFIG_THUMB2_KERNEL
 
-	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
 9999:
 	.if	\inc == 1
 	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
@@ -277,7 +277,7 @@
 
 #else	/* !CONFIG_THUMB2_KERNEL */
 
-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
 	.rept	\rept
 9999:
 	.if	\inc == 1
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index af18cea..b5dc173 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -83,9 +83,9 @@
  * instructions (inline assembly)
  */
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr)	#instr "t"
+#define TUSER(instr)	#instr "t"
 #else
-#define T(instr)	#instr
+#define TUSER(instr)	#instr
 #endif
 
 #else /* __ASSEMBLY__ */
@@ -95,9 +95,9 @@
  * instructions
  */
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr)	instr ## t
+#define TUSER(instr)	instr ## t
 #else
-#define T(instr)	instr
+#define TUSER(instr)	instr
 #endif
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 253cc86..7be5469 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -75,9 +75,9 @@
 
 #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%3]\n"			\
+	"1:	" TUSER(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%3]\n"			\
+	"2:	" TUSER(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
 	__futex_atomic_ex_table("%5")				\
 	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
@@ -95,10 +95,10 @@
 		return -EFAULT;
 
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	" T(ldr) "	%1, [%4]\n"
+	"1:	" TUSER(ldr) "	%1, [%4]\n"
 	"	teq	%1, %2\n"
 	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	" T(streq) "	%3, [%4]\n"
+	"2:	" TUSER(streq) "	%3, [%4]\n"
 	__futex_atomic_ex_table("%5")
 	: "+r" (ret), "=&r" (val)
 	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 1e5717a..ae29293 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -71,12 +71,6 @@
 extern void platform_smp_prepare_cpus(unsigned int);
 
 /*
- * Logical CPU mapping.
- */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
-
-/*
  * Initial data for bringing up a secondary CPU.
  */
 struct secondary_data {
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index f24c1b9..558d6c8 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -43,4 +43,10 @@
 }
 #endif
 
+/*
+ * Logical CPU mapping.
+ */
+extern int __cpu_logical_map[];
+#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
+
 #endif
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index b293616..2958976 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -227,7 +227,7 @@
 
 #define __get_user_asm_byte(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	" T(ldrb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(ldrb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -263,7 +263,7 @@
 
 #define __get_user_asm_word(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(ldr) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -308,7 +308,7 @@
 
 #define __put_user_asm_byte(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	" T(strb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(strb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -341,7 +341,7 @@
 
 #define __put_user_asm_word(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	" T(str) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(str) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -366,10 +366,10 @@
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
- ARM(	"1:	" T(str) "	" __reg_oper1 ", [%1], #4\n"	)	\
- ARM(	"2:	" T(str) "	" __reg_oper0 ", [%1]\n"	)	\
- THUMB(	"1:	" T(str) "	" __reg_oper1 ", [%1]\n"	)	\
- THUMB(	"2:	" T(str) "	" __reg_oper0 ", [%1, #4]\n"	)	\
+ ARM(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1], #4\n"	) \
+ ARM(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1]\n"	) \
+ THUMB(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1]\n"	) \
+ THUMB(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1, #4]\n"	) \
 	"3:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 520889c..9fd0ba9 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -149,6 +149,11 @@
 #endif
 #endif
 
+.macro mcount_adjust_addr rd, rn
+	bic	\rd, \rn, #1		@ clear the Thumb bit if present
+	sub	\rd, \rd, #MCOUNT_INSN_SIZE
+.endm
+
 .macro __mcount suffix
 	mcount_enter
 	ldr	r0, =ftrace_trace_function
@@ -173,8 +178,7 @@
 	mcount_exit
 
 1: 	mcount_get_lr	r1			@ lr of instrumented func
-	mov	r0, lr				@ instrumented function
-	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mcount_adjust_addr	r0, lr		@ instrumented function
 	adr	lr, BSYM(2f)
 	mov	pc, r2
 2:	mcount_exit
@@ -184,8 +188,7 @@
 	mcount_enter
 
 	mcount_get_lr	r1			@ lr of instrumented func
-	mov	r0, lr				@ instrumented function
-	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mcount_adjust_addr	r0, lr		@ instrumented function
 
 	.globl ftrace_call\suffix
 ftrace_call\suffix:
@@ -205,11 +208,11 @@
 #ifdef CONFIG_DYNAMIC_FTRACE
 	@ called from __ftrace_caller, saved in mcount_enter
 	ldr	r1, [sp, #16]		@ instrumented routine (func)
+	mcount_adjust_addr	r1, r1
 #else
 	@ called from __mcount, untouched in lr
-	mov	r1, lr			@ instrumented routine (func)
+	mcount_adjust_addr	r1, lr	@ instrumented routine (func)
 #endif
-	sub	r1, r1, #MCOUNT_INSN_SIZE
 	mov	r2, fp			@ frame pointer
 	bl	prepare_ftrace_return
 	mcount_exit
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 129fbd5..a255c39 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/of_fdt.h>
-#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -160,7 +159,7 @@
 		.flags = IORESOURCE_MEM
 	},
 	{
-		.name = "Kernel text",
+		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
 		.flags = IORESOURCE_MEM
@@ -427,6 +426,20 @@
 	    : "r14");
 }
 
+int __cpu_logical_map[NR_CPUS];
+
+void __init smp_setup_processor_id(void)
+{
+	int i;
+	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
+
+	cpu_logical_map(0) = cpu;
+	for (i = 1; i < NR_CPUS; ++i)
+		cpu_logical_map(i) = i == cpu ? 0 : i;
+
+	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
+}
+
 static void __init setup_processor(void)
 {
 	struct proc_info_list *list;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 57db122..cdeb727 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -233,20 +233,6 @@
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-int __cpu_logical_map[NR_CPUS];
-
-void __init smp_setup_processor_id(void)
-{
-	int i;
-	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
-
-	cpu_logical_map(0) = cpu;
-	for (i = 1; i < NR_CPUS; ++i)
-		cpu_logical_map(i) = i == cpu ? 0 : i;
-
-	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
-}
-
 /*
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
@@ -443,9 +429,7 @@
 static void ipi_timer(void)
 {
 	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
-	irq_enter();
 	evt->event_handler(evt);
-	irq_exit();
 }
 
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
@@ -548,7 +532,9 @@
 
 	switch (ipinr) {
 	case IPI_TIMER:
+		irq_enter();
 		ipi_timer();
+		irq_exit();
 		break;
 
 	case IPI_RESCHEDULE:
@@ -556,15 +542,21 @@
 		break;
 
 	case IPI_CALL_FUNC:
+		irq_enter();
 		generic_smp_call_function_interrupt();
+		irq_exit();
 		break;
 
 	case IPI_CALL_FUNC_SINGLE:
+		irq_enter();
 		generic_smp_call_function_single_interrupt();
+		irq_exit();
 		break;
 
 	case IPI_CPU_STOP:
+		irq_enter();
 		ipi_cpu_stop(cpu);
+		irq_exit();
 		break;
 
 	default:
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index c8e9385..4285daa 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -252,6 +252,8 @@
 	else
 		twd_calibrate_rate();
 
+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
 			CLOCK_EVT_FEAT_C3STOP;
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index f76e755..1e19691 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -4,6 +4,7 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
@@ -181,7 +182,7 @@
 	}
 #endif
 
-	PERCPU_SECTION(32)
+	PERCPU_SECTION(L1_CACHE_BYTES)
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
@@ -212,13 +213,13 @@
 #endif
 
 		NOSAVE_DATA
-		CACHELINE_ALIGNED_DATA(32)
-		READ_MOSTLY_DATA(32)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
 		 */
-		. = ALIGN(32);
+		. = ALIGN(4);
 		__start___ex_table = .;
 #ifdef CONFIG_MMU
 		*(__ex_table)
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 1b049cd..11093a7 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -31,18 +31,18 @@
 #include <asm/domain.h>
 
 ENTRY(__get_user_1)
-1:	T(ldrb)	r2, [r0]
+1: TUSER(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
 #ifdef CONFIG_THUMB2_KERNEL
-2:	T(ldrb)	r2, [r0]
-3:	T(ldrb)	r3, [r0, #1]
+2: TUSER(ldrb)	r2, [r0]
+3: TUSER(ldrb)	r3, [r0, #1]
 #else
-2:	T(ldrb)	r2, [r0], #1
-3:	T(ldrb)	r3, [r0]
+2: TUSER(ldrb)	r2, [r0], #1
+3: TUSER(ldrb)	r3, [r0]
 #endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
@@ -54,7 +54,7 @@
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
-4:	T(ldr)	r2, [r0]
+4: TUSER(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_4)
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index c023fc1..7db2599 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -31,7 +31,7 @@
 #include <asm/domain.h>
 
 ENTRY(__put_user_1)
-1:	T(strb)	r2, [r0]
+1: TUSER(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
@@ -40,19 +40,19 @@
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
-2:	T(strb)	r2, [r0]
-3:	T(strb)	ip, [r0, #1]
+2: TUSER(strb)	r2, [r0]
+3: TUSER(strb)	ip, [r0, #1]
 #else
-2:	T(strb)	ip, [r0]
-3:	T(strb)	r2, [r0, #1]
+2: TUSER(strb)	ip, [r0]
+3: TUSER(strb)	r2, [r0, #1]
 #endif
 #else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
-2:	T(strb)	r2, [r0], #1
-3:	T(strb)	ip, [r0]
+2: TUSER(strb)	r2, [r0], #1
+3: TUSER(strb)	ip, [r0]
 #else
-2:	T(strb)	ip, [r0], #1
-3:	T(strb)	r2, [r0]
+2: TUSER(strb)	ip, [r0], #1
+3: TUSER(strb)	r2, [r0]
 #endif
 #endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
@@ -60,18 +60,18 @@
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
-4:	T(str)	r2, [r0]
+4: TUSER(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
 #ifdef CONFIG_THUMB2_KERNEL
-5:	T(str)	r2, [r0]
-6:	T(str)	r3, [r0, #4]
+5: TUSER(str)	r2, [r0]
+6: TUSER(str)	r3, [r0, #4]
 #else
-5:	T(str)	r2, [r0], #4
-6:	T(str)	r3, [r0]
+5: TUSER(str)	r2, [r0], #4
+6: TUSER(str)	r3, [r0]
 #endif
 	mov	r0, #0
 	mov	pc, lr
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index d0ece2a..5c908b1 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -32,11 +32,11 @@
 		rsb	ip, ip, #4
 		cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		sub	r2, r2, ip
 		b	.Lc2u_dest_aligned
 
@@ -59,7 +59,7 @@
 		addmi	ip, r2, #4
 		bmi	.Lc2u_0nowords
 		ldr	r3, [r1], #4
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -88,18 +88,18 @@
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
 		ldrne	r3, [r1], #4
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_0fupi
 .Lc2u_0nowords:	teq	ip, #0
 		beq	.Lc2u_finished
 .Lc2u_nowords:	cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_not_enough:
@@ -120,7 +120,7 @@
 		mov	r3, r7, pull #8
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #24
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -155,18 +155,18 @@
 		movne	r3, r7, pull #8
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #24
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_1fupi
 .Lc2u_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_2
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		movgt	r3, r7, get_byte_3
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_2fupi:	subs	r2, r2, #4
@@ -175,7 +175,7 @@
 		mov	r3, r7, pull #16
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #16
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -210,18 +210,18 @@
 		movne	r3, r7, pull #16
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #16
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_2fupi
 .Lc2u_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_3
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_3fupi:	subs	r2, r2, #4
@@ -230,7 +230,7 @@
 		mov	r3, r7, pull #24
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #8
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -265,18 +265,18 @@
 		movne	r3, r7, pull #24
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #8
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_3fupi
 .Lc2u_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 ENDPROC(__copy_to_user)
 
@@ -295,11 +295,11 @@
 .Lcfu_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
-USER(		T(ldrb)	r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		sub	r2, r2, ip
 		b	.Lcfu_dest_aligned
@@ -322,7 +322,7 @@
 .Lcfu_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_0nowords
-USER(		T(ldr)	r3, [r1], #4)
+USER(	TUSER(	ldr)	r3, [r1], #4)
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
@@ -351,18 +351,18 @@
 		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		T(ldrne) r3, [r1], #4			@ Shouldnt fault
+	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_0fupi
 .Lcfu_0nowords:	teq	ip, #0
 		beq	.Lcfu_finished
 .Lcfu_nowords:	cmp	ip, #2
-USER(		T(ldrb)	r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -375,7 +375,7 @@
 
 .Lcfu_src_not_aligned:
 		bic	r1, r1, #3
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		cmp	ip, #2
 		bgt	.Lcfu_3fupi
 		beq	.Lcfu_2fupi
@@ -383,7 +383,7 @@
 		addmi	ip, r2, #4
 		bmi	.Lcfu_1nowords
 		mov	r3, r7, pull #8
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #24
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -418,7 +418,7 @@
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #8
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -438,7 +438,7 @@
 		addmi	ip, r2, #4
 		bmi	.Lcfu_2nowords
 		mov	r3, r7, pull #16
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #16
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -474,7 +474,7 @@
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #16
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -486,7 +486,7 @@
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_3
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -494,7 +494,7 @@
 		addmi	ip, r2, #4
 		bmi	.Lcfu_3nowords
 		mov	r3, r7, pull #24
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #8
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -529,7 +529,7 @@
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #24
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -539,9 +539,9 @@
 		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 ENDPROC(__copy_from_user)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4f991f2..71feb00 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -18,6 +18,12 @@
 config HAVE_AT91_USART5
 	bool
 
+config AT91_SAM9_ALT_RESET
+	bool
+
+config AT91_SAM9G45_RESET
+	bool
+
 menu "Atmel AT91 System-on-Chip"
 
 choice
@@ -39,6 +45,7 @@
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
@@ -46,6 +53,7 @@
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
@@ -53,6 +61,7 @@
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
@@ -61,6 +70,7 @@
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
@@ -69,6 +79,7 @@
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
@@ -79,6 +90,7 @@
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
@@ -88,6 +100,7 @@
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9G45_RESET
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
@@ -96,6 +109,7 @@
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9G45_RESET
 
 config ARCH_AT91X40
 	bool "AT91x40"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 242174f..705e1fb 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -8,15 +8,17 @@
 obj-		:=
 
 obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
+obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
+obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
 
 # CPU-specific support
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index edb879a..a42edc2 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -21,7 +21,6 @@
 #include <mach/cpu.h>
 #include <mach/at91cap9.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 
 #include "soc.h"
 #include "generic.h"
@@ -314,11 +313,6 @@
 	}
 };
 
-static void at91cap9_restart(char mode, const char *cmd)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 /* --------------------------------------------------------------------
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
@@ -331,13 +325,14 @@
 static void __init at91cap9_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
+	at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
 }
 
 static void __init at91cap9_initialize(void)
 {
-	arm_pm_restart = at91cap9_restart;
+	arm_pm_restart = at91sam9g45_restart;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 
 	/* Register GPIO subsystem */
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 5e46e4a..d4036ba 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -323,6 +323,7 @@
 static void __init at91sam9260_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9260_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 }
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index b85b9ea..023c2ff 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -281,6 +281,7 @@
 static void __init at91sam9261_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9261_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 }
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 79e3669..75e876c 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -301,6 +301,7 @@
 static void __init at91sam9263_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9263_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
index d3f931c..518e423 100644
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -23,7 +23,8 @@
 			.globl	at91sam9_alt_restart
 
 at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
-			ldr	r1, .at91_va_base_rstc_cr
+			ldr	r1, =at91_rstc_base
+			ldr	r1, [r1]
 
 			mov	r2, #1
 			mov	r3, #AT91_SDRAMC_LPCB_POWER_DOWN
@@ -33,11 +34,9 @@
 
 			str	r2, [r0, #AT91_SDRAMC_TR]	@ disable SDRAM access
 			str	r3, [r0, #AT91_SDRAMC_LPR]	@ power down SDRAM
-			str	r4, [r1]			@ reset processor
+			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
 
 			b	.
 
 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
-.at91_va_base_rstc_cr:
-	.word AT91_VA_BASE_SYS + AT91_RSTC_CR
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 7032dd3..1cb6a96 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -18,7 +18,6 @@
 #include <asm/mach/map.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 #include <mach/cpu.h>
 
 #include "soc.h"
@@ -318,11 +317,6 @@
 	}
 };
 
-static void at91sam9g45_restart(char mode, const char *cmd)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 /* --------------------------------------------------------------------
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
@@ -336,6 +330,7 @@
 static void __init at91sam9g45_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
 }
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
new file mode 100644
index 0000000..0468be1
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@@ -0,0 +1,40 @@
+/*
+ * reset AT91SAM9G45 as per errata
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
+ *
+ * unless the SDRAM is cleanly shutdown before we hit the
+ * reset register it can be left driving the data bus and
+ * killing the chance of a subsequent boot from NAND
+ *
+ * GPLv2 Only
+ */
+
+#include <linux/linkage.h>
+#include <mach/hardware.h>
+#include <mach/at91sam9_ddrsdr.h>
+#include <mach/at91_rstc.h>
+
+			.arm
+
+			.globl	at91sam9g45_restart
+
+at91sam9g45_restart:
+			ldr	r0, .at91_va_base_sdramc0	@ preload constants
+			ldr	r1, =at91_rstc_base
+			ldr	r1, [r1]
+
+			mov	r2, #1
+			mov	r3, #AT91_DDRSDRC_LPCB_POWER_DOWN
+			ldr	r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
+
+			.balign	32				@ align to cache line
+
+			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
+			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
+			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
+
+			b	.
+
+.at91_va_base_sdramc0:
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d6bcb1d..d2c91a8 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -286,6 +286,7 @@
 static void __init at91sam9rl_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 }
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 4866b81..5941334 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -58,7 +58,9 @@
 extern void at91_irq_resume(void);
 
 /* reset */
+extern void at91_ioremap_rstc(u32 base_addr);
 extern void at91sam9_alt_restart(char, const char *);
+extern void at91sam9g45_restart(char, const char *);
 
 /* shutdown */
 extern void at91_ioremap_shdwc(u32 base_addr);
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
index cbd2bf0..875fa33 100644
--- a/arch/arm/mach-at91/include/mach/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -16,13 +16,25 @@
 #ifndef AT91_RSTC_H
 #define AT91_RSTC_H
 
-#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_rstc_base;
+
+#define at91_rstc_read(field) \
+	__raw_readl(at91_rstc_base + field)
+
+#define at91_rstc_write(field, value) \
+	__raw_writel(value, at91_rstc_base + field);
+#else
+.extern at91_rstc_base
+#endif
+
+#define AT91_RSTC_CR		0x00			/* Reset Controller Control Register */
 #define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
 #define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
 #define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
 #define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
 
-#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define AT91_RSTC_SR		0x04			/* Reset Controller Status Register */
 #define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
 #define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
 #define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
@@ -33,7 +45,7 @@
 #define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
 #define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
 
-#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define AT91_RSTC_MR		0x08			/* Reset Controller Mode Register */
 #define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
 #define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
 #define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 4c0e2f6..61d9529 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -83,7 +83,6 @@
 #define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(cpu_is_at91cap9_revB() ?	\
 			(0xfffffd50 - AT91_BASE_SYS) :	\
 			(0xfffffd60 - AT91_BASE_SYS))
@@ -96,6 +95,7 @@
 #define AT91CAP9_BASE_PIOB	0xfffff400
 #define AT91CAP9_BASE_PIOC	0xfffff600
 #define AT91CAP9_BASE_PIOD	0xfffff800
+#define AT91CAP9_BASE_RSTC	0xfffffd00
 #define AT91CAP9_BASE_SHDWC	0xfffffd10
 #define AT91CAP9_BASE_RTT	0xfffffd20
 #define AT91CAP9_BASE_PIT	0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
deleted file mode 100644
index 976f4a6..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
- *
- *  (C) 2008 Andrew Victor
- *
- * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_DDRSDR_H
-#define AT91CAP9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
-#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_DDRSDRC_MODE_NORMAL		0
-#define			AT91_DDRSDRC_MODE_NOP		1
-#define			AT91_DDRSDRC_MODE_PRECHARGE	2
-#define			AT91_DDRSDRC_MODE_LMR		3
-#define			AT91_DDRSDRC_MODE_REFRESH	4
-#define			AT91_DDRSDRC_MODE_EXT_LMR	5
-#define			AT91_DDRSDRC_MODE_DEEP		6
-
-#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
-#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
-#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
-#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
-#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
-#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
-#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
-#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
-#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
-#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
-#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_DDRSDRC_NR_11	(0 << 2)
-#define			AT91_DDRSDRC_NR_12	(1 << 2)
-#define			AT91_DDRSDRC_NR_13	(2 << 2)
-#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
-#define			AT91_DDRSDRC_CAS_2	(2 << 4)
-#define			AT91_DDRSDRC_CAS_3	(3 << 4)
-#define			AT91_DDRSDRC_CAS_25	(6 << 4)
-#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
-#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-
-#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
-#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
-#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
-#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
-#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
-#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
-#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
-#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
-#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
-#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
-#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
-#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
-
-#define AT91_DDRSDRC_LPR	0x18	/* Low Power Register */
-#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_DDRSDRC_LPCB_DISABLE		0
-#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
-#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
-#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
-#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
-#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_DDRSDRC_MDR	0x1C	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_DDRSDRC_MD_SDR		0
-#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-#define			AT91_DDRSDRC_MD_DDR		2
-#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-
-#define AT91_DDRSDRC_DLLR	0x20	/* DLL Information Register */
-#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
-#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
-#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
-#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
-#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
-#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
-#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
-
-/* Register access macros */
-#define at91_ramc_read(num, reg) \
-	at91_sys_read(AT91_DDRSDRC##num + reg)
-#define at91_ramc_write(num, reg, value) \
-	at91_sys_write(AT91_DDRSDRC##num + reg, value)
-
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index f937c47..fa5ca27 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -83,7 +83,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
 
 #define AT91SAM9260_BASE_ECC	0xffffe800
@@ -92,6 +91,7 @@
 #define AT91SAM9260_BASE_PIOA	0xfffff400
 #define AT91SAM9260_BASE_PIOB	0xfffff600
 #define AT91SAM9260_BASE_PIOC	0xfffff800
+#define AT91SAM9260_BASE_RSTC	0xfffffd00
 #define AT91SAM9260_BASE_SHDWC	0xfffffd10
 #define AT91SAM9260_BASE_RTT	0xfffffd20
 #define AT91SAM9260_BASE_PIT	0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 175604e..7cde2d3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -68,7 +68,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
 
 #define AT91SAM9261_BASE_SMC	0xffffec00
@@ -76,6 +75,7 @@
 #define AT91SAM9261_BASE_PIOA	0xfffff400
 #define AT91SAM9261_BASE_PIOB	0xfffff600
 #define AT91SAM9261_BASE_PIOC	0xfffff800
+#define AT91SAM9261_BASE_RSTC	0xfffffd00
 #define AT91SAM9261_BASE_SHDWC	0xfffffd10
 #define AT91SAM9261_BASE_RTT	0xfffffd20
 #define AT91SAM9261_BASE_PIT	0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 80c9150..5949abd 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -78,7 +78,6 @@
 #define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
 #define AT91SAM9263_BASE_ECC0	0xffffe000
@@ -91,6 +90,7 @@
 #define AT91SAM9263_BASE_PIOC	0xfffff600
 #define AT91SAM9263_BASE_PIOD	0xfffff800
 #define AT91SAM9263_BASE_PIOE	0xfffffa00
+#define AT91SAM9263_BASE_RSTC	0xfffffd00
 #define AT91SAM9263_BASE_SHDWC	0xfffffd10
 #define AT91SAM9263_BASE_RTT0	0xfffffd20
 #define AT91SAM9263_BASE_PIT	0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index d27b15b..e2f8da8 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -46,10 +46,10 @@
 #define			AT91_DDRSDRC_CAS_25	(6 << 4)
 #define		AT91_DDRSDRC_RST_DLL	(1 << 7)		/* Reset DLL */
 #define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL */
-#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver */
-#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared */
-#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y */
+#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL [SAM9 Only] */
+#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver [SAM9 Only] */
+#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared [SAM9 Only] */
+#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */
 
 #define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
 #define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
@@ -59,7 +59,8 @@
 #define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
 #define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
 #define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay */
+#define		AT91CAP9_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay [SAM9 Only] */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
 
 #define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
@@ -68,13 +69,14 @@
 #define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
 #define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
 
-#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register */
+#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register [SAM9 Only] */
 #define		AT91_DDRSDRC_TXARD	(0xf  << 0)		/* Exit active power down delay to read command in mode "Fast Exit" */
 #define		AT91_DDRSDRC_TXARDS	(0xf  << 4)		/* Exit active power down delay to read command in mode "Slow Exit" */
 #define		AT91_DDRSDRC_TRPA	(0xf  << 8)		/* Row Precharge All delay */
 #define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
 
 #define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
+#define AT91CAP9_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@@ -92,32 +94,40 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
 
 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
+#define AT91CAP9_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91CAP9_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-#define			AT91_DDRSDRC_MD_DDR2		6
+#define			AT91_DDRSDRC_MD_DDR2		6	/* [SAM9 Only] */
 #define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
 #define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
 #define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
 
 #define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
+#define AT91CAP9_DDRSDRC_DLL	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91CAP9_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
+#define		AT91CAP9_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
+#define		AT91CAP9_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
 #define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+#define		AT91CAP9_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
+#define		AT91CAP9_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
 
-#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register */
+#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register [SAM9 Only] */
 #define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
 
 #define AT91_DDRSDRC_DELAY(n)	(0x30 + (0x4 * (n)))	/* Delay I/O Register n */
 
-#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register */
+#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register [SAM9 Only] */
 #define		AT91_DDRSDRC_WP		(1 << 0)		/* Write protect enable */
 #define		AT91_DDRSDRC_WPKEY	(0xffffff << 8)		/* Write protect key */
 #define		AT91_DDRSDRC_KEY	(0x444452 << 8)		/* Write protect key = "DDR" */
 
-#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register */
+#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register [SAM9 Only] */
 #define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
 #define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */
 
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index f0c23c9..dd9c95e 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -90,7 +90,6 @@
 #define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
 #define AT91SAM9G45_BASE_ECC	0xffffe200
@@ -102,6 +101,7 @@
 #define AT91SAM9G45_BASE_PIOC	0xfffff600
 #define AT91SAM9G45_BASE_PIOD	0xfffff800
 #define AT91SAM9G45_BASE_PIOE	0xfffffa00
+#define AT91SAM9G45_BASE_RSTC	0xfffffd00
 #define AT91SAM9G45_BASE_SHDWC	0xfffffd10
 #define AT91SAM9G45_BASE_RTT	0xfffffd20
 #define AT91SAM9G45_BASE_PIT	0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 2bb359e..d7bead7 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -72,7 +72,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
@@ -84,6 +83,7 @@
 #define AT91SAM9RL_BASE_PIOB	0xfffff600
 #define AT91SAM9RL_BASE_PIOC	0xfffff800
 #define AT91SAM9RL_BASE_PIOD	0xfffffa00
+#define AT91SAM9RL_BASE_RSTC	0xfffffd00
 #define AT91SAM9RL_BASE_SHDWC	0xfffffd10
 #define AT91SAM9RL_BASE_RTT	0xfffffd20
 #define AT91SAM9RL_BASE_PIT	0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index d0b377b..3b33f07 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -88,7 +88,7 @@
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
 	int		vbus_pin[2];	/* port power-control pin */
-	u8              vbus_pin_inverted;
+	u8              vbus_pin_active_low[2];
 	u8              overcurrent_supported;
 	int             overcurrent_pin[2];
 	u8              overcurrent_status[2];
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 62ad955..1606379 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -34,7 +34,6 @@
 /*
  * Show the reason for the previous system reset.
  */
-#if defined(AT91_RSTC)
 
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
@@ -58,10 +57,10 @@
 	char *reason, *r2 = reset;
 	u32 reset_type, wake_type;
 
-	if (!at91_shdwc_base)
+	if (!at91_shdwc_base || !at91_rstc_base)
 		return;
 
-	reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
+	reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
 	wake_type = at91_shdwc_read(AT91_SHDW_SR);
 
 	switch (reset_type) {
@@ -102,10 +101,6 @@
 	}
 	pr_info("AT91: Starting after %s %s\n", reason, r2);
 }
-#else
-static void __init show_reset_status(void) {}
-#endif
-
 
 static int at91_pm_valid_state(suspend_state_t state)
 {
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index ce9a206..7eb40d2 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -25,21 +25,21 @@
 								: : "r" (0))
 
 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
+#include <mach/at91sam9_ddrsdr.h>
 
 
 static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);
 
 	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
 #define wait_for_interrupt_enable()		cpu_do_idle()
 
 #elif defined(CONFIG_ARCH_AT91SAM9G45)
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index f7922a4..92dfb84 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,9 +18,8 @@
 
 #if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200_mc.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9_ddrsdr.h>
 #else
 #include <mach/at91sam9_sdramc.h>
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 8bdcc3c..69d3fc4 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -29,9 +29,12 @@
 void __init at91rm9200_set_type(int type)
 {
 	if (type == ARCH_REVISON_9200_PQFP)
-		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
-	else
 		at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
+	else
+		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
+
+	pr_info("AT91: filled in soc subtype: %s\n",
+		at91_get_soc_subtype(&at91_soc_initdata));
 }
 
 void __init at91_init_irq_default(void)
@@ -281,6 +284,15 @@
 	pm_power_off = at91sam9_poweroff;
 }
 
+void __iomem *at91_rstc_base;
+
+void __init at91_ioremap_rstc(u32 base_addr)
+{
+	at91_rstc_base = ioremap(base_addr, 16);
+	if (!at91_rstc_base)
+		panic("Impossible to ioremap at91_rstc_base\n");
+}
+
 void __init at91_initialize(unsigned long main_clock)
 {
 	at91_boot_soc.ioremap_registers();
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index da70e7e..dd1ad55 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 #include <mach/regs-pmu.h>
 
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 683aec7..0f2035a 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -23,6 +23,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 7afbe1e..8394d51 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
@@ -72,9 +73,7 @@
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
-#ifdef CONFIG_SMP
 	cpu = cpu_logical_map(cpu);
-#endif
 	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 09f357b..4defb97 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -87,7 +87,6 @@
 
 config SOC_IMX5
 	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 9273c2a..2d88f8b 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -814,6 +814,16 @@
 DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
 DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
 
+static unsigned long twd_clk_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk twd_clk = {
+	.parent = &arm_clk,
+	.get_rate = twd_clk_get_rate,
+};
+
 static unsigned long pll2_200m_get_rate(struct clk *clk)
 {
 	return clk_get_rate(clk->parent) / 2;
@@ -1894,6 +1904,7 @@
 	_REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
 	_REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
 	_REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+	_REGISTER_CLOCK("smp_twd", NULL, twd_clk),
 	_REGISTER_CLOCK(NULL, "ckih", ckih_clk),
 	_REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
 	_REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index 08dfb76..753f4fc 100644
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -188,8 +188,10 @@
 		return -ENOMEM;
 
 	iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
-	if (!iomuxc_base)
+	if (!iomuxc_base) {
+		iounmap(weim_base);
 		return -ENOMEM;
+	}
 
 	/* CS1 timings for LAN9220 */
 	writel(0x20001, (weim_base + 0x18));
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 29bd124..e15f155 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
+#include <asm/smp_plat.h>
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020
@@ -24,10 +25,6 @@
 
 static void __iomem *src_base;
 
-#ifndef CONFIG_SMP
-#define cpu_logical_map(cpu)		0
-#endif
-
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
index 41c252d..a446fc1 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
@@ -11,6 +11,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 0b3e357..db0117e 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -20,6 +20,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
+#include <asm/smp_plat.h>
 
 #include <mach/msm_iomap.h>
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a8ba7b9..41e6612 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -33,7 +33,6 @@
 	default y
 	select CPU_V7
 	select USB_ARCH_HAS_EHCI
-	select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4
 	select ARCH_HAS_OPP
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 18fd177..5bc1312 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -415,29 +415,9 @@
 	},
 };
 
-static struct resource sa1100_rtc_resources[] = {
-	[0] = {
-		.start  = 0x40900000,
-		.end	= 0x409000ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
 struct platform_device sa1100_device_rtc = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.num_resources  = ARRAY_SIZE(sa1100_rtc_resources),
-	.resource       = sa1100_rtc_resources,
 };
 
 struct platform_device pxa_device_rtc = {
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index adf058f..91e4f6c 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -209,8 +209,6 @@
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 180bd86..aed6cbc 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -230,8 +230,6 @@
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0388eda..40bb165 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -89,7 +89,6 @@
 static struct clk_lookup common_clkregs[] = {
 	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index d487e1f..8d614ec 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -83,7 +83,6 @@
 static struct clk_lookup pxa320_clkregs[] = {
 	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static int __init pxa320_init(void)
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f107c71..4f402af 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -67,7 +67,6 @@
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
 	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index fccc644..d082a58 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -217,7 +217,6 @@
 	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
 	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index ac1aed2..eb55f05 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 794a8d9..124bce6 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -47,21 +47,23 @@
 #define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
 
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x10100600
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
 #define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
 #else
-#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x1F000600
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
 #define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
+#define REALVIEW_EB11MP_PRIV_MEM_SIZE	SZ_8K
+#define REALVIEW_EB11MP_PRIV_MEM_OFF(x)	(REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
+
+#define REALVIEW_EB11MP_SCU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0)		/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100)	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
+#define REALVIEW_EB11MP_GIC_DIST_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000)	/* Generic interrupt controller distributor */
+
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 7abf918..aa2d4e0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -75,6 +75,8 @@
 /*
  * Testchip peripheral and fpga gic regions
  */
+#define REALVIEW_TC11MP_PRIV_MEM_BASE		0x1F000000
+#define REALVIEW_TC11MP_PRIV_MEM_SIZE		SZ_8K
 #define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
 #define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
 #define REALVIEW_TC11MP_TWD_BASE		0x1F000600
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index e629621..9578145 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -91,14 +91,9 @@
 
 static struct map_desc realview_eb11mp_io_desc[] __initdata = {
 	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
+		.length		= REALVIEW_EB11MP_PRIV_MEM_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 127a3fd..2147335 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -64,15 +64,10 @@
 		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+	}, {	/* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
+		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
+		.length		= REALVIEW_TC11MP_PRIV_MEM_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index ebafe8a..0c4b76a 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -202,7 +202,6 @@
 static struct mcp_plat_data assabet_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init assabet_init(void)
@@ -253,17 +252,6 @@
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
 	sa11x0_register_mcp(&assabet_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index d12d0f4..11bb6d0 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -124,23 +124,12 @@
 static struct mcp_plat_data cerf_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
 	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&cerf_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index d6df9f6..dab3c63 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,39 +11,17 @@
 #include <linux/clk.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-};
-
+/*
+ * Very simple clock implementation - we only have one clock to deal with.
+ */
 struct clk {
-	const struct clkops	*ops;
-	unsigned long		rate;
 	unsigned int		enabled;
 };
 
-#define INIT_CLKREG(_clk, _devname, _conname)		\
-	{						\
-		.clk		= _clk,			\
-		.dev_id		= _devname,		\
-		.con_id		= _conname,		\
-	}
-
-#define DEFINE_CLK(_name, _ops, _rate)			\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-		.rate	= _rate,			\
-	}
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void clk_gpio27_enable(struct clk *clk)
+static void clk_gpio27_enable(void)
 {
 	/*
 	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
@@ -54,22 +32,38 @@
 	TUCR = TUCR_3_6864MHz;
 }
 
-static void clk_gpio27_disable(struct clk *clk)
+static void clk_gpio27_disable(void)
 {
 	TUCR = 0;
 	GPDR &= ~GPIO_32_768kHz;
 	GAFR &= ~GPIO_32_768kHz;
 }
 
+static struct clk clk_gpio27;
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	const char *devname = dev_name(dev);
+
+	return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
+		clk_gpio27_enable();
 	spin_unlock_irqrestore(&clocks_lock, flags);
-
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
@@ -82,48 +76,13 @@
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
+		clk_gpio27_disable();
 	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
-	unsigned long rate;
-
-	rate = clk->rate;
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-
-	return rate;
+	return 3686400;
 }
 EXPORT_SYMBOL(clk_get_rate);
-
-const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-static void clk_dummy_enable(struct clk *clk) { }
-static void clk_dummy_disable(struct clk *clk) { }
-
-const struct clkops clk_dummy_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-};
-
-static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400);
-static DEFINE_CLK(dummy, &clk_dummy_ops, 0);
-
-static struct clk_lookup sa11xx_clkregs[] = {
-	INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-static int __init sa11xx_clk_init(void)
-{
-	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
-	return 0;
-}
-
-postcore_initcall(sa11xx_clk_init);
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index c483912..fd56521 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -27,7 +27,6 @@
 #include <linux/timer.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
-#include <linux/mfd/ucb1x00.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -86,15 +85,10 @@
 	.num_devs	= 1,
 };
 
-static struct ucb1x00_plat_data collie_ucb1x00_data = {
-	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
-};
-
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
-	.codec		= "ucb1x00",
-	.codec_pdata	= &collie_ucb1x00_data,
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
 };
 
 /*
@@ -144,8 +138,6 @@
 static struct resource collie_power_resource[] = {
 	{
 		.name		= "ac",
-		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
-		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
 		.flags		= IORESOURCE_IRQ |
 				  IORESOURCE_IRQ_HIGHEDGE |
 				  IORESOURCE_IRQ_LOWEDGE,
@@ -347,7 +339,8 @@
 
 	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
 
-
+	collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
+	collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
 	platform_scoop_config = &collie_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -357,16 +350,6 @@
 
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index aaa8acf..19b2053 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -228,7 +228,7 @@
 	return 0;
 }
 
-static struct cpufreq_driver sa1100_driver = {
+static struct cpufreq_driver sa1100_driver __refdata = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= sa11x0_verify_speed,
 	.target		= sa1100_target,
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e3a28ca..bb10ee2 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -217,15 +217,10 @@
 static struct resource sa11x0mcp_resources[] = {
 	[0] = {
 		.start	= __PREG(Ser4MCCR0),
-		.end	= __PREG(Ser4MCCR0) + 0x1C - 1,
+		.end	= __PREG(Ser4MCCR0) + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= __PREG(Ser4MCCR1),
-		.end	= __PREG(Ser4MCCR1) + 0x4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
 		.start	= IRQ_Ser4MCP,
 		.end	= IRQ_Ser4MCP,
 		.flags	= IORESOURCE_IRQ,
@@ -350,29 +345,9 @@
 	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
-static struct resource sa11x0rtc_resources[] = {
-	[0] = {
-		.start	= 0x90010000,
-		.end	= 0x900100ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_RTC1Hz,
-		.end	= IRQ_RTC1Hz,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_RTCAlrm,
-		.end	= IRQ_RTCAlrm,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
 static struct platform_device sa11x0rtc_device = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.resource	= sa11x0rtc_resources,
-	.num_resources	= ARRAY_SIZE(sa11x0rtc_resources),
 };
 
 static struct platform_device *sa11x0_devices[] __initdata = {
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index 586cec8..ed1a331 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -17,8 +17,6 @@
 	u32 mccr1;
 	unsigned int sclk_rate;
 	int gpio_base;
-	const char *codec;
-	void *codec_pdata;
 };
 
 #endif
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index f50b00b..b412fc0 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -198,3 +198,5 @@
 {
 	return platform_driver_register(&jornadassp_driver);
 }
+
+module_init(jornada_ssp_init);
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index d117cea..af4e276 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -24,20 +24,10 @@
 static struct mcp_plat_data lart_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init lart_init(void)
 {
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 748d344..318b2b7 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -55,22 +55,11 @@
 static struct mcp_plat_data shannon_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init shannon_init(void)
 {
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&shannon_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 458ecec..e17c04d 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,7 +14,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <linux/mfd/ucb1x00.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -188,15 +187,10 @@
 	}
 };
 
-static struct ucb1x00_plat_data simpad_ucb1x00_data = {
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
-};
-
 static struct mcp_plat_data simpad_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1300",
-	.codec_pdata	= &simpad_ucb1x00_data,
+	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
 };
 
 
@@ -384,16 +378,6 @@
 
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&simpad_mcp_data);
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index cc97ef8..4fe2e9e 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <mach/common.h>
 #include <mach/r8a7779.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index be1ade7..0d159d6 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <mach/common.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index a3e0c86..52af004 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -7,6 +7,7 @@
 	select HAS_MTU
 	select ARM_ERRATA_753970
 	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369
 
 menu "Ux500 SoC"
 
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 23be34b..5dde4d4 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -261,6 +261,8 @@
 
 void __init snowball_sdi_init(void)
 {
+	/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
+	mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
 	/* On-board eMMC */
 	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 122ddde..da5569d 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -12,44 +12,6 @@
 
 static void __iomem *l2x0_base;
 
-static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
-{
-	/* wait for the operation to complete */
-	while (readl_relaxed(reg) & mask)
-		cpu_relax();
-}
-
-static inline void ux500_cache_sync(void)
-{
-	writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC);
-	ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1);
-}
-
-/*
- * The L2 cache cannot be turned off in the non-secure world.
- * Dummy until a secure service is in place.
- */
-static void ux500_l2x0_disable(void)
-{
-}
-
-/*
- * This is only called when doing a kexec, just after turning off the L2
- * and L1 cache, and it is surrounded by a spinlock in the generic version.
- * However, we're not really turning off the L2 cache right now and the
- * PL310 does not support exclusive accesses (used to implement the spinlock).
- * So, the invalidation needs to be done without the spinlock.
- */
-static void ux500_l2x0_inv_all(void)
-{
-	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
-
-	/* invalidate all ways */
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
-	ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
-	ux500_cache_sync();
-}
-
 static int __init ux500_l2x0_unlock(void)
 {
 	int i;
@@ -85,9 +47,13 @@
 	/* 64KB way size, 8 way associativity, force WA */
 	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
 
-	/* Override invalidate function */
-	outer_cache.disable = ux500_l2x0_disable;
-	outer_cache.inv_all = ux500_l2x0_inv_all;
+	/*
+	 * We can't disable l2 as we are in non secure mode, currently
+	 * this seems be called only during kexec path. So let's
+	 * override outer.disable with nasty assignment until we have
+	 * some SMI service available.
+	 */
+	outer_cache.disable = NULL;
 
 	return 0;
 }
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index 572015e..c76f0f4 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index a19e398..d2058ef 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -19,6 +19,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 0a01cbd..9f9e1c2 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -95,13 +95,7 @@
 };
 
 static struct musb_hdrc_platform_data musb_platform_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
 	.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
-	.mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
-	.mode = MUSB_HOST,
-#endif
 	.config = &musb_hdrc_config,
 	.board_data = &musb_board_data,
 };
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 2b1e836..b1e87c1 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -217,7 +217,7 @@
 }
 
 #ifdef CONFIG_SMP
-static void ct_ca9x4_init_cpu_map(void)
+static void __init ct_ca9x4_init_cpu_map(void)
 {
 	int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
 
@@ -233,7 +233,7 @@
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-static void ct_ca9x4_smp_enable(unsigned int max_cpus)
+static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
 {
 	scu_enable(MMIO_P2V(A9_MPCORE_SCU));
 }
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index 813ee08..3034a4d 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/system.h>
 
 extern volatile int pen_release;
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 4cefb57..1a3ca24 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -882,6 +882,7 @@
 
 config ARM_L1_CACHE_SHIFT_6
 	bool
+	default y if CPU_V7
 	help
 	  Setting ARM L1 cache line size to 64 Bytes.
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 6ec1226..5dc7d12 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -310,7 +310,7 @@
 
 static bool arm_memblock_steal_permitted = true;
 
-phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align)
+phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
 {
 	phys_addr_t phys;
 
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 80632e8..ba15937 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -225,7 +225,8 @@
 		if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
 			continue;
 		if (__phys_to_pfn(area->phys_addr) > pfn ||
-		    __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
+		    __pfn_to_phys(pfn) + offset + size-1 >
+		    area->phys_addr + area->size-1)
 			continue;
 		/* we can drop the lock here as we know *area is static */
 		read_unlock(&vmlist_lock);
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 7e9b5bf..0404ccb 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -148,10 +148,6 @@
  *	Initialise TLB, Caches, and MMU state ready to switch the MMU
  *	on.  Return in r0 the new CP15 C1 control register setting.
  *
- *	We automatically detect if we have a Harvard cache, and use the
- *	Harvard cache control instructions insead of the unified cache
- *	control instructions.
- *
  *	This should be able to cover all ARMv7 cores.
  *
  *	It is assumed that:
@@ -251,9 +247,7 @@
 #endif
 
 3:	mov	r10, #0
-#ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
-#endif
 	dsb
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
@@ -330,16 +324,6 @@
 	.size	__v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
 
 	/*
-	 * ARM Ltd. Cortex A7 processor.
-	 */
-	.type	__v7_ca7mp_proc_info, #object
-__v7_ca7mp_proc_info:
-	.long	0x410fc070
-	.long	0xff0ffff0
-	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
-	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
-
-	/*
 	 * ARM Ltd. Cortex A9 processor.
 	 */
 	.type   __v7_ca9mp_proc_info, #object
@@ -351,6 +335,16 @@
 #endif	/* CONFIG_ARM_LPAE */
 
 	/*
+	 * ARM Ltd. Cortex A7 processor.
+	 */
+	.type	__v7_ca7mp_proc_info, #object
+__v7_ca7mp_proc_info:
+	.long	0x410fc070
+	.long	0xff0ffff0
+	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
+
+	/*
 	 * ARM Ltd. Cortex A15 processor.
 	 */
 	.type	__v7_ca15mp_proc_info, #object
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
index 6fa8a70..f7d1804 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -96,6 +96,6 @@
 extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		const char *label);
 
-extern int __init imx_iomuxv1_init(void __iomem *base, int numports);
+extern int imx_iomuxv1_init(void __iomem *base, int numports);
 
 #endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index 92f18d3..49c7db4 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -16,6 +16,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/hardware/gic.h>
 
 /*
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 4203d10..c4ac15c 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -414,9 +414,9 @@
 					 * FDC val = 4 -> Supervisor only */
 		asm volatile ("\n"
 			"	.chip	68030\n"
-			"	pmove	%0@,%/tt1\n"
+			"	pmove	%0,%/tt1\n"
 			"	.chip	68k"
-			: : "a" (&tt1_val));
+			: : "m" (tt1_val));
 	} else {
 	        asm volatile ("\n"
 			"	.chip	68040\n"
@@ -569,10 +569,10 @@
 			: "d0");
 	} else
 		asm volatile ("\n"
-			"	pmove	%0@,%%tc\n"
+			"	pmove	%0,%%tc\n"
 			"	jmp	%1@"
 			: /* no outputs */
-			: "a" (&tc_val), "a" (reset_addr));
+			: "m" (tc_val), "a" (reset_addr));
 }
 
 
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 0e89fa0..c1155f0 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -50,19 +50,6 @@
 
 #define IRQ_USER	8
 
-/*
- * various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - IRQF_DISABLED and
- * IRQF_SHARED are your friends.
- */
-#ifndef MACH_AMIGA_ONLY
-#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
-#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
-#define IRQ_FLG_FAST	(0x0004)
-#define IRQ_FLG_SLOW	(0x0008)
-#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
-#endif
-
 struct irq_data;
 struct irq_chip;
 struct irq_desc;
diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c
index 125f34e..099283e 100644
--- a/arch/m68k/kernel/process_mm.c
+++ b/arch/m68k/kernel/process_mm.c
@@ -172,7 +172,7 @@
 
 	current->thread.fs = __USER_DS;
 	if (!FPU_IS_EMU)
-		asm volatile ("frestore %0@" : : "a" (&zero) : "memory");
+		asm volatile("frestore %0": :"m" (zero));
 }
 
 /*
diff --git a/arch/m68k/kernel/process_no.c b/arch/m68k/kernel/process_no.c
index 69c1803..5e1078c 100644
--- a/arch/m68k/kernel/process_no.c
+++ b/arch/m68k/kernel/process_no.c
@@ -163,8 +163,8 @@
 #ifdef CONFIG_FPU
 	if (!FPU_IS_EMU)
 		asm volatile (".chip 68k/68881\n\t"
-			      "frestore %0@\n\t"
-			      ".chip 68k" : : "a" (&zero));
+			      "frestore %0\n\t"
+			      ".chip 68k" : : "m" (zero));
 #endif
 }
 
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index a76452c..daaa918 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -552,13 +552,13 @@
 
 #ifdef DEBUG
 		asm volatile ("ptestr %3,%2@,#7,%0\n\t"
-			      "pmove %%psr,%1@"
-			      : "=a&" (desc)
-			      : "a" (&temp), "a" (addr), "d" (ssw));
+			      "pmove %%psr,%1"
+			      : "=a&" (desc), "=m" (temp)
+			      : "a" (addr), "d" (ssw));
 #else
 		asm volatile ("ptestr %2,%1@,#7\n\t"
-			      "pmove %%psr,%0@"
-			      : : "a" (&temp), "a" (addr), "d" (ssw));
+			      "pmove %%psr,%0"
+			      : "=m" (temp) : "a" (addr), "d" (ssw));
 #endif
 		mmusr = temp;
 
@@ -605,20 +605,18 @@
 			       !(ssw & RW) ? "write" : "read", addr,
 			       fp->ptregs.pc, ssw);
 			asm volatile ("ptestr #1,%1@,#0\n\t"
-				      "pmove %%psr,%0@"
-				      : /* no outputs */
-				      : "a" (&temp), "a" (addr));
+				      "pmove %%psr,%0"
+				      : "=m" (temp)
+				      : "a" (addr));
 			mmusr = temp;
 
 			printk ("level 0 mmusr is %#x\n", mmusr);
 #if 0
-			asm volatile ("pmove %%tt0,%0@"
-				      : /* no outputs */
-				      : "a" (&tlong));
+			asm volatile ("pmove %%tt0,%0"
+				      : "=m" (tlong));
 			printk("tt0 is %#lx, ", tlong);
-			asm volatile ("pmove %%tt1,%0@"
-				      : /* no outputs */
-				      : "a" (&tlong));
+			asm volatile ("pmove %%tt1,%0"
+				      : "=m" (tlong));
 			printk("tt1 is %#lx\n", tlong);
 #endif
 #ifdef DEBUG
@@ -668,13 +666,13 @@
 
 #ifdef DEBUG
 	asm volatile ("ptestr #1,%2@,#7,%0\n\t"
-		      "pmove %%psr,%1@"
-		      : "=a&" (desc)
-		      : "a" (&temp), "a" (addr));
+		      "pmove %%psr,%1"
+		      : "=a&" (desc), "=m" (temp)
+		      : "a" (addr));
 #else
 	asm volatile ("ptestr #1,%1@,#7\n\t"
-		      "pmove %%psr,%0@"
-		      : : "a" (&temp), "a" (addr));
+		      "pmove %%psr,%0"
+		      : "=m" (temp) : "a" (addr));
 #endif
 	mmusr = temp;
 
diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c
index 95d0bf6..3d84c1f 100644
--- a/arch/m68k/mm/cache.c
+++ b/arch/m68k/mm/cache.c
@@ -52,9 +52,9 @@
 		unsigned long *descaddr;
 
 		asm volatile ("ptestr %3,%2@,#7,%0\n\t"
-			      "pmove %%psr,%1@"
-			      : "=a&" (descaddr)
-			      : "a" (&mmusr), "a" (vaddr), "d" (get_fs().seg));
+			      "pmove %%psr,%1"
+			      : "=a&" (descaddr), "=m" (mmusr)
+			      : "a" (vaddr), "d" (get_fs().seg));
 		if (mmusr & (MMU_I|MMU_B|MMU_L))
 			return 0;
 		descaddr = phys_to_virt((unsigned long)descaddr);
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 74f23a4..c8d6efb 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -19,6 +19,7 @@
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_CPU_DEVICES
+	select GENERIC_ATOMIC64
 
 config SWAP
 	def_bool n
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index 6d2e1d4..615f539 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -2,6 +2,7 @@
 #define _ASM_MICROBLAZE_ATOMIC_H
 
 #include <asm-generic/atomic.h>
+#include <asm-generic/atomic64.h>
 
 /*
  * Atomically test *v and decrement if it is greater than 0.
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index e9f3533..0ad2f1e 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -88,7 +88,6 @@
 KBUILD_AFLAGS	+= $(aflags-y)
 
 OBJCOPYFLAGS	:= -O binary
-LDFLAGS_vmlinux := -e start
 
 head-y		:= arch/s390/kernel/head.o
 head-y		+= arch/s390/kernel/$(if $(CONFIG_64BIT),head64.o,head31.o)
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index e4c79eb..21109c6 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -9,12 +9,12 @@
 #ifndef CONFIG_64BIT
 OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
 OUTPUT_ARCH(s390)
-ENTRY(_start)
+ENTRY(startup)
 jiffies = jiffies_64 + 4;
 #else
 OUTPUT_FORMAT("elf64-s390", "elf64-s390", "elf64-s390")
 OUTPUT_ARCH(s390:64-bit)
-ENTRY(_start)
+ENTRY(startup)
 jiffies = jiffies_64;
 #endif
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 9665799..ca5580e 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -33,6 +33,7 @@
 config SPARC32
 	def_bool !64BIT
 	select GENERIC_ATOMIC64
+	select CLZ_TAB
 
 config SPARC64
 	def_bool 64BIT
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 422c16d..e611651 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -399,6 +399,9 @@
 	timers_global = (void __iomem *)
 		(unsigned long) addr[num_cpu_timers];
 
+	/* Every per-cpu timer works in timer mode */
+	sbus_writel(0x00000000, &timers_global->timer_config);
+
 	sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
 
 	master_l10_counter = &timers_global->l10_count;
diff --git a/arch/sparc/lib/divdi3.S b/arch/sparc/lib/divdi3.S
index 681b368..d74bc09 100644
--- a/arch/sparc/lib/divdi3.S
+++ b/arch/sparc/lib/divdi3.S
@@ -17,23 +17,9 @@
 the Free Software Foundation, 59 Temple Place - Suite 330,
 Boston, MA 02111-1307, USA.  */
 
-	.data
-	.align 8
-	.globl	__clz_tab
-__clz_tab:
-	.byte	0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5
-	.byte	6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6
-	.byte	7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
-	.byte	7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
-	.byte	8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
-	.byte	8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
-	.byte	8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
-	.byte	8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
-	.size	 __clz_tab,256
-	.global .udiv
-
 	.text
 	.align 4
+	.global .udiv
 	.globl __divdi3
 __divdi3:
 	save %sp,-104,%sp
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 864cc6e..5bed94e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -360,7 +360,6 @@
 	depends on NUMA
 	depends on SMP
 	depends on X86_X2APIC
-	depends on !EDAC_AMD64
 	---help---
 	  Adds support for Numascale NumaChip large-SMP systems. Needed to
 	  enable more than ~168 cores.
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 3a19d04..7116dcb 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -321,6 +321,8 @@
 		default: /* Ignore other PT_* */ break;
 		}
 	}
+
+	free(phdrs);
 }
 
 asmlinkage void decompress_kernel(void *rmode, memptr heap,
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index 0c9fa27..b3b7332 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -145,13 +145,13 @@
 
 #ifdef __HAVE_ARCH_CMPXCHG
 #define cmpxchg(ptr, old, new)						\
-	__cmpxchg((ptr), (old), (new), sizeof(*ptr))
+	__cmpxchg(ptr, old, new, sizeof(*(ptr)))
 
 #define sync_cmpxchg(ptr, old, new)					\
-	__sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+	__sync_cmpxchg(ptr, old, new, sizeof(*(ptr)))
 
 #define cmpxchg_local(ptr, old, new)					\
-	__cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
+	__cmpxchg_local(ptr, old, new, sizeof(*(ptr)))
 #endif
 
 /*
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 17c5d4b..8d67d42 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -159,6 +159,7 @@
 #define X86_FEATURE_WDT		(6*32+13) /* Watchdog timer */
 #define X86_FEATURE_LWP		(6*32+15) /* Light Weight Profiling */
 #define X86_FEATURE_FMA4	(6*32+16) /* 4 operands MAC instructions */
+#define X86_FEATURE_TCE		(6*32+17) /* translation cache extension */
 #define X86_FEATURE_NODEID_MSR	(6*32+19) /* NodeId MSR */
 #define X86_FEATURE_TBM		(6*32+21) /* trailing bit manipulations */
 #define X86_FEATURE_TOPOEXT	(6*32+22) /* topology extensions CPUID leafs */
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 54a13aa..21f7385 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -318,13 +318,13 @@
 /* UV global physical address --> socket phys RAM */
 static inline unsigned long uv_gpa_to_soc_phys_ram(unsigned long gpa)
 {
-	unsigned long paddr = gpa & uv_hub_info->gpa_mask;
+	unsigned long paddr;
 	unsigned long remap_base = uv_hub_info->lowmem_remap_base;
 	unsigned long remap_top =  uv_hub_info->lowmem_remap_top;
 
 	gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) |
 		((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val);
-	gpa = gpa & uv_hub_info->gpa_mask;
+	paddr = gpa & uv_hub_info->gpa_mask;
 	if (paddr >= remap_base && paddr < remap_base + remap_top)
 		paddr -= remap_base;
 	return paddr;
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 1aae78f..4025fe4 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -252,7 +252,8 @@
 	unsigned short ss;
 	unsigned long sp;
 #endif
-	printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
+	printk(KERN_DEFAULT
+	       "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
 #ifdef CONFIG_PREEMPT
 	printk("PREEMPT ");
 #endif
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 6d728d9..17107bd 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -129,7 +129,7 @@
 	if (!stack) {
 		if (regs)
 			stack = (unsigned long *)regs->sp;
-		else if (task && task != current)
+		else if (task != current)
 			stack = (unsigned long *)task->thread.sp;
 		else
 			stack = &dummy;
@@ -269,11 +269,11 @@
 		unsigned char c;
 		u8 *ip;
 
-		printk(KERN_EMERG "Stack:\n");
+		printk(KERN_DEFAULT "Stack:\n");
 		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
-				   0, KERN_EMERG);
+				   0, KERN_DEFAULT);
 
-		printk(KERN_EMERG "Code: ");
+		printk(KERN_DEFAULT "Code: ");
 
 		ip = (u8 *)regs->ip - code_prologue;
 		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index fe86493..ac0417b 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -311,13 +311,33 @@
 	return state;
 }
 
+/*
+ * AMD microcode firmware naming convention, up to family 15h they are in
+ * the legacy file:
+ *
+ *    amd-ucode/microcode_amd.bin
+ *
+ * This legacy file is always smaller than 2K in size.
+ *
+ * Starting at family 15h they are in family specific firmware files:
+ *
+ *    amd-ucode/microcode_amd_fam15h.bin
+ *    amd-ucode/microcode_amd_fam16h.bin
+ *    ...
+ *
+ * These might be larger than 2K.
+ */
 static enum ucode_state request_microcode_amd(int cpu, struct device *device)
 {
-	const char *fw_name = "amd-ucode/microcode_amd.bin";
+	char fw_name[36] = "amd-ucode/microcode_amd.bin";
 	const struct firmware *fw;
 	enum ucode_state ret = UCODE_NFOUND;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if (request_firmware(&fw, fw_name, device)) {
+	if (c->x86 >= 0x15)
+		snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86);
+
+	if (request_firmware(&fw, (const char *)fw_name, device)) {
 		pr_err("failed to load file %s\n", fw_name);
 		goto out;
 	}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 37a458b..d840e69 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -39,6 +39,14 @@
 enum reboot_type reboot_type = BOOT_ACPI;
 int reboot_force;
 
+/* This variable is used privately to keep track of whether or not
+ * reboot_type is still set to its default value (i.e., reboot= hasn't
+ * been set on the command line).  This is needed so that we can
+ * suppress DMI scanning for reboot quirks.  Without it, it's
+ * impossible to override a faulty reboot quirk without recompiling.
+ */
+static int reboot_default = 1;
+
 #if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
 static int reboot_cpu = -1;
 #endif
@@ -67,6 +75,12 @@
 static int __init reboot_setup(char *str)
 {
 	for (;;) {
+		/* Having anything passed on the command line via
+		 * reboot= will cause us to disable DMI checking
+		 * below.
+		 */
+		reboot_default = 0;
+
 		switch (*str) {
 		case 'w':
 			reboot_mode = 0x1234;
@@ -295,14 +309,6 @@
 			DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
 		},
 	},
-	{	/* Handle problems with rebooting on VersaLogic Menlow boards */
-		.callback = set_bios_reboot,
-		.ident = "VersaLogic Menlow based board",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"),
-			DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
-		},
-	},
 	{ /* Handle reboot issue on Acer Aspire one */
 		.callback = set_kbd_reboot,
 		.ident = "Acer Aspire One A110",
@@ -316,7 +322,12 @@
 
 static int __init reboot_init(void)
 {
-	dmi_check_system(reboot_dmi_table);
+	/* Only do the DMI check if reboot_type hasn't been overridden
+	 * on the command line
+	 */
+	if (reboot_default) {
+		dmi_check_system(reboot_dmi_table);
+	}
 	return 0;
 }
 core_initcall(reboot_init);
@@ -465,7 +476,12 @@
 
 static int __init pci_reboot_init(void)
 {
-	dmi_check_system(pci_reboot_dmi_table);
+	/* Only do the DMI check if reboot_type hasn't been overridden
+	 * on the command line
+	 */
+	if (reboot_default) {
+		dmi_check_system(pci_reboot_dmi_table);
+	}
 	return 0;
 }
 core_initcall(pci_reboot_init);
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9d74824..f0b4caf 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -673,7 +673,7 @@
 
 	stackend = end_of_stack(tsk);
 	if (tsk != &init_task && *stackend != STACK_END_MAGIC)
-		printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
+		printk(KERN_EMERG "Thread overran stack, or stack corrupted\n");
 
 	tsk->thread.cr2		= address;
 	tsk->thread.trap_no	= 14;
@@ -684,7 +684,7 @@
 		sig = 0;
 
 	/* Executive summary in case the body of the oops scrolled away */
-	printk(KERN_EMERG "CR2: %016lx\n", address);
+	printk(KERN_DEFAULT "CR2: %016lx\n", address);
 
 	oops_end(flags, regs, sig);
 }
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 9be4cff..3ae0e61 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1851,6 +1851,8 @@
 		bcp->cong_reps			= congested_reps;
 		bcp->cong_period		= congested_period;
 		bcp->clocks_per_100_usec =	usec_2_cycles(100);
+		spin_lock_init(&bcp->queue_lock);
+		spin_lock_init(&bcp->uvhub_lock);
 	}
 }
 
diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index 374a05d..f25c276 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -25,7 +25,7 @@
 	int			irq;
 };
 
-static spinlock_t		uv_irq_lock;
+static DEFINE_SPINLOCK(uv_irq_lock);
 static struct rb_root		uv_irq_root;
 
 static int uv_set_irq_affinity(struct irq_data *, const struct cpumask *, bool);
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index cc9b1e1..d69cc6c 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -116,9 +116,26 @@
 }
 #endif  /* CONFIG_XEN_DEBUG_FS */
 
+/*
+ * Size struct xen_spinlock so it's the same as arch_spinlock_t.
+ */
+#if NR_CPUS < 256
+typedef u8 xen_spinners_t;
+# define inc_spinners(xl) \
+	asm(LOCK_PREFIX " incb %0" : "+m" ((xl)->spinners) : : "memory");
+# define dec_spinners(xl) \
+	asm(LOCK_PREFIX " decb %0" : "+m" ((xl)->spinners) : : "memory");
+#else
+typedef u16 xen_spinners_t;
+# define inc_spinners(xl) \
+	asm(LOCK_PREFIX " incw %0" : "+m" ((xl)->spinners) : : "memory");
+# define dec_spinners(xl) \
+	asm(LOCK_PREFIX " decw %0" : "+m" ((xl)->spinners) : : "memory");
+#endif
+
 struct xen_spinlock {
 	unsigned char lock;		/* 0 -> free; 1 -> locked */
-	unsigned short spinners;	/* count of waiting cpus */
+	xen_spinners_t spinners;	/* count of waiting cpus */
 };
 
 static int xen_spin_is_locked(struct arch_spinlock *lock)
@@ -164,8 +181,7 @@
 
 	wmb();			/* set lock of interest before count */
 
-	asm(LOCK_PREFIX " incw %0"
-	    : "+m" (xl->spinners) : : "memory");
+	inc_spinners(xl);
 
 	return prev;
 }
@@ -176,8 +192,7 @@
  */
 static inline void unspinning_lock(struct xen_spinlock *xl, struct xen_spinlock *prev)
 {
-	asm(LOCK_PREFIX " decw %0"
-	    : "+m" (xl->spinners) : : "memory");
+	dec_spinners(xl);
 	wmb();			/* decrement count before restoring lock */
 	__this_cpu_write(lock_spinners, prev);
 }
@@ -373,6 +388,8 @@
 
 void __init xen_init_spinlocks(void)
 {
+	BUILD_BUG_ON(sizeof(struct xen_spinlock) > sizeof(arch_spinlock_t));
+
 	pv_lock_ops.spin_is_locked = xen_spin_is_locked;
 	pv_lock_ops.spin_is_contended = xen_spin_is_contended;
 	pv_lock_ops.spin_lock = xen_spin_lock;
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 2c8272d..610f999 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -1,6 +1,6 @@
 # Makefile for the Linux device tree
 
-obj-y			:= core.o sys.o bus.o dd.o syscore.o \
+obj-y			:= core.o bus.o dd.o syscore.o \
 			   driver.o class.o platform.o \
 			   cpu.o firmware.o init.o map.o devres.o \
 			   attribute_container.o transport_class.o \
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 4a67cc0..74dda4f 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -632,6 +632,11 @@
  * may be used for reference counting of @dev after calling this
  * function.
  *
+ * All fields in @dev must be initialized by the caller to 0, except
+ * for those explicitly set to some other value.  The simplest
+ * approach is to use kzalloc() to allocate the structure containing
+ * @dev.
+ *
  * NOTE: Use put_device() to give up your reference instead of freeing
  * @dev directly once you have called this function.
  */
@@ -930,6 +935,13 @@
  * to the global and sibling lists for the device, then
  * adds it to the other relevant subsystems of the driver model.
  *
+ * Do not call this routine or device_register() more than once for
+ * any device structure.  The driver model core is not designed to work
+ * with devices that get unregistered and then spring back to life.
+ * (Among other things, it's very hard to guarantee that all references
+ * to the previous incarnation of @dev have been dropped.)  Allocate
+ * and register a fresh new struct device instead.
+ *
  * NOTE: _Never_ directly free @dev after calling this function, even
  * if it returned an error! Always use put_device() to give up your
  * reference instead.
@@ -1022,7 +1034,7 @@
 	device_pm_add(dev);
 
 	/* Notify clients of device addition.  This call must come
-	 * after dpm_sysf_add() and before kobject_uevent().
+	 * after dpm_sysfs_add() and before kobject_uevent().
 	 */
 	if (dev->bus)
 		blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
@@ -1090,6 +1102,9 @@
  * have a clearly defined need to use and refcount the device
  * before it is added to the hierarchy.
  *
+ * For more information, see the kerneldoc for device_initialize()
+ * and device_add().
+ *
  * NOTE: _Never_ directly free @dev after calling this function, even
  * if it returned an error! Always use put_device() to give up the
  * reference initialized in this function instead.
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
deleted file mode 100644
index 409f5ce..0000000
--- a/drivers/base/sys.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
- * sys.c - pseudo-bus for system 'devices' (cpus, PICs, timers, etc)
- *
- * Copyright (c) 2002-3 Patrick Mochel
- *               2002-3 Open Source Development Lab
- *
- * This file is released under the GPLv2
- *
- * This exports a 'system' bus type.
- * By default, a 'sys' bus gets added to the root of the system. There will
- * always be core system devices. Devices can use sysdev_register() to
- * add themselves as children of the system bus.
- */
-
-#include <linux/sysdev.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-
-#include "base.h"
-
-#define to_sysdev(k) container_of(k, struct sys_device, kobj)
-#define to_sysdev_attr(a) container_of(a, struct sysdev_attribute, attr)
-
-
-static ssize_t
-sysdev_show(struct kobject *kobj, struct attribute *attr, char *buffer)
-{
-	struct sys_device *sysdev = to_sysdev(kobj);
-	struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr);
-
-	if (sysdev_attr->show)
-		return sysdev_attr->show(sysdev, sysdev_attr, buffer);
-	return -EIO;
-}
-
-
-static ssize_t
-sysdev_store(struct kobject *kobj, struct attribute *attr,
-	     const char *buffer, size_t count)
-{
-	struct sys_device *sysdev = to_sysdev(kobj);
-	struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr);
-
-	if (sysdev_attr->store)
-		return sysdev_attr->store(sysdev, sysdev_attr, buffer, count);
-	return -EIO;
-}
-
-static const struct sysfs_ops sysfs_ops = {
-	.show	= sysdev_show,
-	.store	= sysdev_store,
-};
-
-static struct kobj_type ktype_sysdev = {
-	.sysfs_ops	= &sysfs_ops,
-};
-
-
-int sysdev_create_file(struct sys_device *s, struct sysdev_attribute *a)
-{
-	return sysfs_create_file(&s->kobj, &a->attr);
-}
-
-
-void sysdev_remove_file(struct sys_device *s, struct sysdev_attribute *a)
-{
-	sysfs_remove_file(&s->kobj, &a->attr);
-}
-
-EXPORT_SYMBOL_GPL(sysdev_create_file);
-EXPORT_SYMBOL_GPL(sysdev_remove_file);
-
-#define to_sysdev_class(k) container_of(k, struct sysdev_class, kset.kobj)
-#define to_sysdev_class_attr(a) container_of(a, \
-	struct sysdev_class_attribute, attr)
-
-static ssize_t sysdev_class_show(struct kobject *kobj, struct attribute *attr,
-				 char *buffer)
-{
-	struct sysdev_class *class = to_sysdev_class(kobj);
-	struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
-
-	if (class_attr->show)
-		return class_attr->show(class, class_attr, buffer);
-	return -EIO;
-}
-
-static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr,
-				  const char *buffer, size_t count)
-{
-	struct sysdev_class *class = to_sysdev_class(kobj);
-	struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
-
-	if (class_attr->store)
-		return class_attr->store(class, class_attr, buffer, count);
-	return -EIO;
-}
-
-static const struct sysfs_ops sysfs_class_ops = {
-	.show	= sysdev_class_show,
-	.store	= sysdev_class_store,
-};
-
-static struct kobj_type ktype_sysdev_class = {
-	.sysfs_ops	= &sysfs_class_ops,
-};
-
-int sysdev_class_create_file(struct sysdev_class *c,
-			     struct sysdev_class_attribute *a)
-{
-	return sysfs_create_file(&c->kset.kobj, &a->attr);
-}
-EXPORT_SYMBOL_GPL(sysdev_class_create_file);
-
-void sysdev_class_remove_file(struct sysdev_class *c,
-			      struct sysdev_class_attribute *a)
-{
-	sysfs_remove_file(&c->kset.kobj, &a->attr);
-}
-EXPORT_SYMBOL_GPL(sysdev_class_remove_file);
-
-extern struct kset *system_kset;
-
-int sysdev_class_register(struct sysdev_class *cls)
-{
-	int retval;
-
-	pr_debug("Registering sysdev class '%s'\n", cls->name);
-
-	INIT_LIST_HEAD(&cls->drivers);
-	memset(&cls->kset.kobj, 0x00, sizeof(struct kobject));
-	cls->kset.kobj.parent = &system_kset->kobj;
-	cls->kset.kobj.ktype = &ktype_sysdev_class;
-	cls->kset.kobj.kset = system_kset;
-
-	retval = kobject_set_name(&cls->kset.kobj, "%s", cls->name);
-	if (retval)
-		return retval;
-
-	retval = kset_register(&cls->kset);
-	if (!retval && cls->attrs)
-		retval = sysfs_create_files(&cls->kset.kobj,
-					    (const struct attribute **)cls->attrs);
-	return retval;
-}
-
-void sysdev_class_unregister(struct sysdev_class *cls)
-{
-	pr_debug("Unregistering sysdev class '%s'\n",
-		 kobject_name(&cls->kset.kobj));
-	if (cls->attrs)
-		sysfs_remove_files(&cls->kset.kobj,
-				   (const struct attribute **)cls->attrs);
-	kset_unregister(&cls->kset);
-}
-
-EXPORT_SYMBOL_GPL(sysdev_class_register);
-EXPORT_SYMBOL_GPL(sysdev_class_unregister);
-
-static DEFINE_MUTEX(sysdev_drivers_lock);
-
-/*
- * @dev != NULL means that we're unwinding because some drv->add()
- * failed for some reason. You need to grab sysdev_drivers_lock before
- * calling this.
- */
-static void __sysdev_driver_remove(struct sysdev_class *cls,
-				   struct sysdev_driver *drv,
-				   struct sys_device *from_dev)
-{
-	struct sys_device *dev = from_dev;
-
-	list_del_init(&drv->entry);
-	if (!cls)
-		return;
-
-	if (!drv->remove)
-		goto kset_put;
-
-	if (dev)
-		list_for_each_entry_continue_reverse(dev, &cls->kset.list,
-						     kobj.entry)
-			drv->remove(dev);
-	else
-		list_for_each_entry(dev, &cls->kset.list, kobj.entry)
-			drv->remove(dev);
-
-kset_put:
-	kset_put(&cls->kset);
-}
-
-/**
- *	sysdev_driver_register - Register auxiliary driver
- *	@cls:	Device class driver belongs to.
- *	@drv:	Driver.
- *
- *	@drv is inserted into @cls->drivers to be
- *	called on each operation on devices of that class. The refcount
- *	of @cls is incremented.
- */
-int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv)
-{
-	struct sys_device *dev = NULL;
-	int err = 0;
-
-	if (!cls) {
-		WARN(1, KERN_WARNING "sysdev: invalid class passed to %s!\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	/* Check whether this driver has already been added to a class. */
-	if (drv->entry.next && !list_empty(&drv->entry))
-		WARN(1, KERN_WARNING "sysdev: class %s: driver (%p) has already"
-			" been registered to a class, something is wrong, but "
-			"will forge on!\n", cls->name, drv);
-
-	mutex_lock(&sysdev_drivers_lock);
-	if (cls && kset_get(&cls->kset)) {
-		list_add_tail(&drv->entry, &cls->drivers);
-
-		/* If devices of this class already exist, tell the driver */
-		if (drv->add) {
-			list_for_each_entry(dev, &cls->kset.list, kobj.entry) {
-				err = drv->add(dev);
-				if (err)
-					goto unwind;
-			}
-		}
-	} else {
-		err = -EINVAL;
-		WARN(1, KERN_ERR "%s: invalid device class\n", __func__);
-	}
-
-	goto unlock;
-
-unwind:
-	__sysdev_driver_remove(cls, drv, dev);
-
-unlock:
-	mutex_unlock(&sysdev_drivers_lock);
-	return err;
-}
-
-/**
- *	sysdev_driver_unregister - Remove an auxiliary driver.
- *	@cls:	Class driver belongs to.
- *	@drv:	Driver.
- */
-void sysdev_driver_unregister(struct sysdev_class *cls,
-			      struct sysdev_driver *drv)
-{
-	mutex_lock(&sysdev_drivers_lock);
-	__sysdev_driver_remove(cls, drv, NULL);
-	mutex_unlock(&sysdev_drivers_lock);
-}
-EXPORT_SYMBOL_GPL(sysdev_driver_register);
-EXPORT_SYMBOL_GPL(sysdev_driver_unregister);
-
-/**
- *	sysdev_register - add a system device to the tree
- *	@sysdev:	device in question
- *
- */
-int sysdev_register(struct sys_device *sysdev)
-{
-	int error;
-	struct sysdev_class *cls = sysdev->cls;
-
-	if (!cls)
-		return -EINVAL;
-
-	pr_debug("Registering sys device of class '%s'\n",
-		 kobject_name(&cls->kset.kobj));
-
-	/* initialize the kobject to 0, in case it had previously been used */
-	memset(&sysdev->kobj, 0x00, sizeof(struct kobject));
-
-	/* Make sure the kset is set */
-	sysdev->kobj.kset = &cls->kset;
-
-	/* Register the object */
-	error = kobject_init_and_add(&sysdev->kobj, &ktype_sysdev, NULL,
-				     "%s%d", kobject_name(&cls->kset.kobj),
-				     sysdev->id);
-
-	if (!error) {
-		struct sysdev_driver *drv;
-
-		pr_debug("Registering sys device '%s'\n",
-			 kobject_name(&sysdev->kobj));
-
-		mutex_lock(&sysdev_drivers_lock);
-		/* Generic notification is implicit, because it's that
-		 * code that should have called us.
-		 */
-
-		/* Notify class auxiliary drivers */
-		list_for_each_entry(drv, &cls->drivers, entry) {
-			if (drv->add)
-				drv->add(sysdev);
-		}
-		mutex_unlock(&sysdev_drivers_lock);
-		kobject_uevent(&sysdev->kobj, KOBJ_ADD);
-	}
-
-	return error;
-}
-
-void sysdev_unregister(struct sys_device *sysdev)
-{
-	struct sysdev_driver *drv;
-
-	mutex_lock(&sysdev_drivers_lock);
-	list_for_each_entry(drv, &sysdev->cls->drivers, entry) {
-		if (drv->remove)
-			drv->remove(sysdev);
-	}
-	mutex_unlock(&sysdev_drivers_lock);
-
-	kobject_put(&sysdev->kobj);
-}
-
-EXPORT_SYMBOL_GPL(sysdev_register);
-EXPORT_SYMBOL_GPL(sysdev_unregister);
-
-#define to_ext_attr(x) container_of(x, struct sysdev_ext_attribute, attr)
-
-ssize_t sysdev_store_ulong(struct sys_device *sysdev,
-			   struct sysdev_attribute *attr,
-			   const char *buf, size_t size)
-{
-	struct sysdev_ext_attribute *ea = to_ext_attr(attr);
-	char *end;
-	unsigned long new = simple_strtoul(buf, &end, 0);
-	if (end == buf)
-		return -EINVAL;
-	*(unsigned long *)(ea->var) = new;
-	/* Always return full write size even if we didn't consume all */
-	return size;
-}
-EXPORT_SYMBOL_GPL(sysdev_store_ulong);
-
-ssize_t sysdev_show_ulong(struct sys_device *sysdev,
-			  struct sysdev_attribute *attr,
-			  char *buf)
-{
-	struct sysdev_ext_attribute *ea = to_ext_attr(attr);
-	return snprintf(buf, PAGE_SIZE, "%lx\n", *(unsigned long *)(ea->var));
-}
-EXPORT_SYMBOL_GPL(sysdev_show_ulong);
-
-ssize_t sysdev_store_int(struct sys_device *sysdev,
-			   struct sysdev_attribute *attr,
-			   const char *buf, size_t size)
-{
-	struct sysdev_ext_attribute *ea = to_ext_attr(attr);
-	char *end;
-	long new = simple_strtol(buf, &end, 0);
-	if (end == buf || new > INT_MAX || new < INT_MIN)
-		return -EINVAL;
-	*(int *)(ea->var) = new;
-	/* Always return full write size even if we didn't consume all */
-	return size;
-}
-EXPORT_SYMBOL_GPL(sysdev_store_int);
-
-ssize_t sysdev_show_int(struct sys_device *sysdev,
-			  struct sysdev_attribute *attr,
-			  char *buf)
-{
-	struct sysdev_ext_attribute *ea = to_ext_attr(attr);
-	return snprintf(buf, PAGE_SIZE, "%d\n", *(int *)(ea->var));
-}
-EXPORT_SYMBOL_GPL(sysdev_show_int);
-
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 4b71647..317c28c 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -194,10 +194,10 @@
 
 err_out:
 	if (bridge->driver->needs_scratch_page) {
-		void *va = page_address(bridge->scratch_page_page);
+		struct page *page = bridge->scratch_page_page;
 
-		bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
-		bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
+		bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP);
+		bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE);
 	}
 	if (got_gatt)
 		bridge->driver->free_gatt_table(bridge);
@@ -221,10 +221,10 @@
 
 	if (bridge->driver->agp_destroy_page &&
 	    bridge->driver->needs_scratch_page) {
-		void *va = page_address(bridge->scratch_page_page);
+		struct page *page = bridge->scratch_page_page;
 
-		bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
-		bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
+		bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP);
+		bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE);
 	}
 }
 
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 6628fea..7f5f0da 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -263,6 +263,7 @@
 static char ohci_driver_name[] = KBUILD_MODNAME;
 
 #define PCI_DEVICE_ID_AGERE_FW643	0x5901
+#define PCI_DEVICE_ID_CREATIVE_SB1394	0x4001
 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW	0x2380
 #define PCI_DEVICE_ID_TI_TSB12LV22	0x8009
 #define PCI_DEVICE_ID_TI_TSB12LV26	0x8020
@@ -289,6 +290,9 @@
 	{PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
 		QUIRK_NO_MSI},
 
+	{PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID,
+		QUIRK_RESET_PACKET},
+
 	{PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID,
 		QUIRK_NO_MSI},
 
@@ -299,7 +303,7 @@
 		QUIRK_NO_MSI},
 
 	{PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
-		QUIRK_CYCLE_TIMER},
+		QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
 
 	{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
 		QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 396e60c..f8625e2 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -140,7 +140,7 @@
 	obj->dev = dev;
 	obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
 	if (IS_ERR(obj->filp))
-		return -ENOMEM;
+		return PTR_ERR(obj->filp);
 
 	kref_init(&obj->refcount);
 	atomic_set(&obj->handle_count, 0);
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index f9aaa56..b9e5266 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -13,7 +13,7 @@
 
 config DRM_EXYNOS_FIMD
 	tristate "Exynos DRM FIMD"
-	depends on DRM_EXYNOS
+	depends on DRM_EXYNOS && !FB_S3C
 	default n
 	help
 	  Choose this option if you want to use Exynos FIMD for DRM.
@@ -21,7 +21,7 @@
 
 config DRM_EXYNOS_HDMI
 	tristate "Exynos DRM HDMI"
-	depends on DRM_EXYNOS
+	depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_TV
 	help
 	  Choose this option if you want to use Exynos HDMI for DRM.
 	  If M is selected, the module will be called exynos_drm_hdmi
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index ca83139..b6a737d 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -158,7 +158,8 @@
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 	case DRM_MODE_DPMS_OFF:
-		pm_runtime_put_sync(subdrv_dev);
+		if (!ctx->suspended)
+			pm_runtime_put_sync(subdrv_dev);
 		break;
 	default:
 		DRM_DEBUG_KMS("unspecified mode %d\n", mode);
@@ -734,6 +735,46 @@
 	writel(val, ctx->regs + SHADOWCON);
 }
 
+static int fimd_power_on(struct fimd_context *ctx, bool enable)
+{
+	struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
+	struct device *dev = subdrv->manager.dev;
+
+	DRM_DEBUG_KMS("%s\n", __FILE__);
+
+	if (enable != false && enable != true)
+		return -EINVAL;
+
+	if (enable) {
+		int ret;
+
+		ret = clk_enable(ctx->bus_clk);
+		if (ret < 0)
+			return ret;
+
+		ret = clk_enable(ctx->lcd_clk);
+		if  (ret < 0) {
+			clk_disable(ctx->bus_clk);
+			return ret;
+		}
+
+		ctx->suspended = false;
+
+		/* if vblank was enabled status, enable it again. */
+		if (test_and_clear_bit(0, &ctx->irq_flags))
+			fimd_enable_vblank(dev);
+
+		fimd_apply(dev);
+	} else {
+		clk_disable(ctx->lcd_clk);
+		clk_disable(ctx->bus_clk);
+
+		ctx->suspended = true;
+	}
+
+	return 0;
+}
+
 static int __devinit fimd_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -911,39 +952,30 @@
 #ifdef CONFIG_PM_SLEEP
 static int fimd_suspend(struct device *dev)
 {
-	int ret;
+	struct fimd_context *ctx = get_fimd_context(dev);
 
 	if (pm_runtime_suspended(dev))
 		return 0;
 
-	ret = pm_runtime_suspend(dev);
-	if (ret < 0)
-		return ret;
-
-	return 0;
+	/*
+	 * do not use pm_runtime_suspend(). if pm_runtime_suspend() is
+	 * called here, an error would be returned by that interface
+	 * because the usage_count of pm runtime is more than 1.
+	 */
+	return fimd_power_on(ctx, false);
 }
 
 static int fimd_resume(struct device *dev)
 {
-	int ret;
+	struct fimd_context *ctx = get_fimd_context(dev);
 
-	ret = pm_runtime_resume(dev);
-	if (ret < 0) {
-		DRM_ERROR("failed to resume runtime pm.\n");
-		return ret;
-	}
-
-	pm_runtime_disable(dev);
-
-	ret = pm_runtime_set_active(dev);
-	if (ret < 0) {
-		DRM_ERROR("failed to active runtime pm.\n");
-		pm_runtime_enable(dev);
-		pm_runtime_suspend(dev);
-		return ret;
-	}
-
-	pm_runtime_enable(dev);
+	/*
+	 * if entered to sleep when lcd panel was on, the usage_count
+	 * of pm runtime would still be 1 so in this case, fimd driver
+	 * should be on directly not drawing on pm runtime interface.
+	 */
+	if (!pm_runtime_suspended(dev))
+		return fimd_power_on(ctx, true);
 
 	return 0;
 }
@@ -956,39 +988,16 @@
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	clk_disable(ctx->lcd_clk);
-	clk_disable(ctx->bus_clk);
-
-	ctx->suspended = true;
-	return 0;
+	return fimd_power_on(ctx, false);
 }
 
 static int fimd_runtime_resume(struct device *dev)
 {
 	struct fimd_context *ctx = get_fimd_context(dev);
-	int ret;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	ret = clk_enable(ctx->bus_clk);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_enable(ctx->lcd_clk);
-	if  (ret < 0) {
-		clk_disable(ctx->bus_clk);
-		return ret;
-	}
-
-	ctx->suspended = false;
-
-	/* if vblank was enabled status, enable it again. */
-	if (test_and_clear_bit(0, &ctx->irq_flags))
-		fimd_enable_vblank(dev);
-
-	fimd_apply(dev);
-
-	return 0;
+	return fimd_power_on(ctx, true);
 }
 #endif
 
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index f48f7ce..3429d3f 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -1116,8 +1116,8 @@
 err_iomap:
 	iounmap(hdata->regs);
 err_req_region:
-	release_resource(hdata->regs_res);
-	kfree(hdata->regs_res);
+	release_mem_region(hdata->regs_res->start,
+			resource_size(hdata->regs_res));
 err_resource:
 	hdmi_resources_cleanup(hdata);
 err_data:
@@ -1145,8 +1145,8 @@
 
 	iounmap(hdata->regs);
 
-	release_resource(hdata->regs_res);
-	kfree(hdata->regs_res);
+	release_mem_region(hdata->regs_res->start,
+			resource_size(hdata->regs_res));
 
 	/* hdmiphy i2c driver */
 	i2c_del_driver(&hdmiphy_driver);
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 791c0ef..830dfdd6b 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -113,12 +113,12 @@
 
 void psbfb_suspend(struct drm_device *dev)
 {
-	struct drm_framebuffer *fb = 0;
-	struct psb_framebuffer *psbfb = to_psb_fb(fb);
+	struct drm_framebuffer *fb;
 
 	console_lock();
 	mutex_lock(&dev->mode_config.mutex);
 	list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+		struct psb_framebuffer *psbfb = to_psb_fb(fb);
 		struct fb_info *info = psbfb->fbdev;
 		fb_set_suspend(info, 1);
 		drm_fb_helper_blank(FB_BLANK_POWERDOWN, info);
@@ -129,12 +129,12 @@
 
 void psbfb_resume(struct drm_device *dev)
 {
-	struct drm_framebuffer *fb = 0;
-	struct psb_framebuffer *psbfb = to_psb_fb(fb);
+	struct drm_framebuffer *fb;
 
 	console_lock();
 	mutex_lock(&dev->mode_config.mutex);
 	list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+		struct psb_framebuffer *psbfb = to_psb_fb(fb);
 		struct fb_info *info = psbfb->fbdev;
 		fb_set_suspend(info, 0);
 		drm_fb_helper_blank(FB_BLANK_UNBLANK, info);
diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c
index f7c17b2..7f4b4e1 100644
--- a/drivers/gpu/drm/i810/i810_dma.c
+++ b/drivers/gpu/drm/i810/i810_dma.c
@@ -886,7 +886,7 @@
 }
 
 /* Must be called with the lock held */
-void i810_driver_reclaim_buffers(struct drm_device *dev,
+static void i810_reclaim_buffers(struct drm_device *dev,
 				 struct drm_file *file_priv)
 {
 	struct drm_device_dma *dma = dev->dma;
@@ -1223,17 +1223,12 @@
 		if (dev_priv->page_flipping)
 			i810_do_cleanup_pageflip(dev);
 	}
+}
 
-	if (file_priv->master && file_priv->master->lock.hw_lock) {
-		drm_idlelock_take(&file_priv->master->lock);
-		i810_driver_reclaim_buffers(dev, file_priv);
-		drm_idlelock_release(&file_priv->master->lock);
-	} else {
-		/* master disappeared, clean up stuff anyway and hope nothing
-		 * goes wrong */
-		i810_driver_reclaim_buffers(dev, file_priv);
-	}
-
+void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
+					struct drm_file *file_priv)
+{
+	i810_reclaim_buffers(dev, file_priv);
 }
 
 int i810_driver_dma_quiescent(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c
index 053f1ee..ec12f7d 100644
--- a/drivers/gpu/drm/i810/i810_drv.c
+++ b/drivers/gpu/drm/i810/i810_drv.c
@@ -63,6 +63,7 @@
 	.lastclose = i810_driver_lastclose,
 	.preclose = i810_driver_preclose,
 	.device_is_agp = i810_driver_device_is_agp,
+	.reclaim_buffers_locked = i810_driver_reclaim_buffers_locked,
 	.dma_quiescent = i810_driver_dma_quiescent,
 	.ioctls = i810_ioctls,
 	.fops = &i810_driver_fops,
diff --git a/drivers/gpu/drm/i810/i810_drv.h b/drivers/gpu/drm/i810/i810_drv.h
index 6e0acad..c9339f4 100644
--- a/drivers/gpu/drm/i810/i810_drv.h
+++ b/drivers/gpu/drm/i810/i810_drv.h
@@ -116,12 +116,14 @@
 
 				/* i810_dma.c */
 extern int i810_driver_dma_quiescent(struct drm_device *dev);
-void i810_driver_reclaim_buffers(struct drm_device *dev,
-			         struct drm_file *file_priv);
+extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
+					       struct drm_file *file_priv);
 extern int i810_driver_load(struct drm_device *, unsigned long flags);
 extern void i810_driver_lastclose(struct drm_device *dev);
 extern void i810_driver_preclose(struct drm_device *dev,
 				 struct drm_file *file_priv);
+extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
+					       struct drm_file *file_priv);
 extern int i810_driver_device_is_agp(struct drm_device *dev);
 
 extern long i810_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 1180798..deaa657 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -121,11 +121,11 @@
 static void
 describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 {
-	seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s",
+	seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d%s%s%s",
 		   &obj->base,
 		   get_pin_flag(obj),
 		   get_tiling_flag(obj),
-		   obj->base.size,
+		   obj->base.size / 1024,
 		   obj->base.read_domains,
 		   obj->base.write_domain,
 		   obj->last_rendering_seqno,
@@ -653,7 +653,7 @@
 	seq_printf(m, "  Size :    %08x\n", ring->size);
 	seq_printf(m, "  Active :  %08x\n", intel_ring_get_active_head(ring));
 	seq_printf(m, "  NOPID :   %08x\n", I915_READ_NOPID(ring));
-	if (IS_GEN6(dev)) {
+	if (IS_GEN6(dev) || IS_GEN7(dev)) {
 		seq_printf(m, "  Sync 0 :   %08x\n", I915_READ_SYNC_0(ring));
 		seq_printf(m, "  Sync 1 :   %08x\n", I915_READ_SYNC_1(ring));
 	}
@@ -1075,6 +1075,7 @@
 	struct drm_device *dev = node->minor->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 rpmodectl1, gt_core_status, rcctl1;
+	unsigned forcewake_count;
 	int count=0, ret;
 
 
@@ -1082,9 +1083,13 @@
 	if (ret)
 		return ret;
 
-	if (atomic_read(&dev_priv->forcewake_count)) {
-		seq_printf(m, "RC information inaccurate because userspace "
-			      "holds a reference \n");
+	spin_lock_irq(&dev_priv->gt_lock);
+	forcewake_count = dev_priv->forcewake_count;
+	spin_unlock_irq(&dev_priv->gt_lock);
+
+	if (forcewake_count) {
+		seq_printf(m, "RC information inaccurate because somebody "
+			      "holds a forcewake reference \n");
 	} else {
 		/* NB: we cannot use forcewake, else we read the wrong values */
 		while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
@@ -1106,7 +1111,7 @@
 	seq_printf(m, "SW control enabled: %s\n",
 		   yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
 			  GEN6_RP_MEDIA_SW_MODE));
-	seq_printf(m, "RC6 Enabled: %s\n",
+	seq_printf(m, "RC1e Enabled: %s\n",
 		   yesno(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
 	seq_printf(m, "RC6 Enabled: %s\n",
 		   yesno(rcctl1 & GEN6_RC_CTL_RC6_ENABLE));
@@ -1398,9 +1403,13 @@
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned forcewake_count;
 
-	seq_printf(m, "forcewake count = %d\n",
-		   atomic_read(&dev_priv->forcewake_count));
+	spin_lock_irq(&dev_priv->gt_lock);
+	forcewake_count = dev_priv->forcewake_count;
+	spin_unlock_irq(&dev_priv->gt_lock);
+
+	seq_printf(m, "forcewake count = %u\n", forcewake_count);
 
 	return 0;
 }
@@ -1665,7 +1674,7 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int ret;
 
-	if (!IS_GEN6(dev))
+	if (INTEL_INFO(dev)->gen < 6)
 		return 0;
 
 	ret = mutex_lock_interruptible(&dev->struct_mutex);
@@ -1682,7 +1691,7 @@
 	struct drm_device *dev = inode->i_private;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (!IS_GEN6(dev))
+	if (INTEL_INFO(dev)->gen < 6)
 		return 0;
 
 	/*
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5f4d589..ddfe3d9 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -2045,6 +2045,7 @@
 	if (!IS_I945G(dev) && !IS_I945GM(dev))
 		pci_enable_msi(dev->pdev);
 
+	spin_lock_init(&dev_priv->gt_lock);
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->error_lock);
 	spin_lock_init(&dev_priv->rps_lock);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 8f71879..308f819 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -368,11 +368,12 @@
  */
 void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 {
-	WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
+	unsigned long irqflags;
 
-	/* Forcewake is atomic in case we get in here without the lock */
-	if (atomic_add_return(1, &dev_priv->forcewake_count) == 1)
+	spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
+	if (dev_priv->forcewake_count++ == 0)
 		dev_priv->display.force_wake_get(dev_priv);
+	spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
 }
 
 void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
@@ -392,10 +393,12 @@
  */
 void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
 {
-	WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
+	unsigned long irqflags;
 
-	if (atomic_dec_and_test(&dev_priv->forcewake_count))
+	spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
+	if (--dev_priv->forcewake_count == 0)
 		dev_priv->display.force_wake_put(dev_priv);
+	spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
 }
 
 void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
@@ -597,9 +600,36 @@
 static int gen6_do_reset(struct drm_device *dev, u8 flags)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	int	ret;
+	unsigned long irqflags;
 
-	I915_WRITE(GEN6_GDRST, GEN6_GRDOM_FULL);
-	return wait_for((I915_READ(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
+	/* Hold gt_lock across reset to prevent any register access
+	 * with forcewake not set correctly
+	 */
+	spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
+
+	/* Reset the chip */
+
+	/* GEN6_GDRST is not in the gt power well, no need to check
+	 * for fifo space for the write or forcewake the chip for
+	 * the read
+	 */
+	I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL);
+
+	/* Spin waiting for the device to ack the reset request */
+	ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
+
+	/* If reset with a user forcewake, try to restore, otherwise turn it off */
+	if (dev_priv->forcewake_count)
+		dev_priv->display.force_wake_get(dev_priv);
+	else
+		dev_priv->display.force_wake_put(dev_priv);
+
+	/* Restore fifo count */
+	dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+
+	spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
+	return ret;
 }
 
 /**
@@ -643,9 +673,6 @@
 	case 7:
 	case 6:
 		ret = gen6_do_reset(dev, flags);
-		/* If reset with a user forcewake, try to restore */
-		if (atomic_read(&dev_priv->forcewake_count))
-			__gen6_gt_force_wake_get(dev_priv);
 		break;
 	case 5:
 		ret = ironlake_do_reset(dev, flags);
@@ -927,9 +954,14 @@
 u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
 	u##x val = 0; \
 	if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
-		gen6_gt_force_wake_get(dev_priv); \
+		unsigned long irqflags; \
+		spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
+		if (dev_priv->forcewake_count == 0) \
+			dev_priv->display.force_wake_get(dev_priv); \
 		val = read##y(dev_priv->regs + reg); \
-		gen6_gt_force_wake_put(dev_priv); \
+		if (dev_priv->forcewake_count == 0) \
+			dev_priv->display.force_wake_put(dev_priv); \
+		spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
 	} else { \
 		val = read##y(dev_priv->regs + reg); \
 	} \
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 602bc80..9689ca3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -288,7 +288,13 @@
 	int relative_constants_mode;
 
 	void __iomem *regs;
-	u32 gt_fifo_count;
+	/** gt_fifo_count and the subsequent register write are synchronized
+	 * with dev->struct_mutex. */
+	unsigned gt_fifo_count;
+	/** forcewake_count is protected by gt_lock */
+	unsigned forcewake_count;
+	/** gt_lock is also taken in irq contexts. */
+	struct spinlock gt_lock;
 
 	struct intel_gmbus {
 		struct i2c_adapter adapter;
@@ -741,8 +747,6 @@
 
 	struct drm_property *broadcast_rgb_property;
 	struct drm_property *force_audio_property;
-
-	atomic_t forcewake_count;
 } drm_i915_private_t;
 
 enum i915_cache_level {
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 5d433fc..5bd4361 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1751,7 +1751,8 @@
 		INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work);
 
 	I915_WRITE(HWSTAM, 0xeffe);
-	if (IS_GEN6(dev) || IS_GEN7(dev)) {
+
+	if (IS_GEN6(dev)) {
 		/* Workaround stalls observed on Sandy Bridge GPUs by
 		 * making the blitter command streamer generate a
 		 * write to the Hardware Status Page for
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 7886e4f..2b5eb22 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -28,14 +28,19 @@
 #include "drm.h"
 #include "i915_drm.h"
 #include "intel_drv.h"
+#include "i915_reg.h"
 
 static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32	dpll_reg;
 
+	/* On IVB, 3rd pipe shares PLL with another one */
+	if (pipe > 1)
+		return false;
+
 	if (HAS_PCH_SPLIT(dev))
-		dpll_reg = (pipe == PIPE_A) ? _PCH_DPLL_A : _PCH_DPLL_B;
+		dpll_reg = PCH_DPLL(pipe);
 	else
 		dpll_reg = (pipe == PIPE_A) ? _DPLL_A : _DPLL_B;
 
@@ -822,7 +827,7 @@
 
 	if (IS_IRONLAKE_M(dev))
 		ironlake_disable_drps(dev);
-	if (IS_GEN6(dev))
+	if (INTEL_INFO(dev)->gen >= 6)
 		gen6_disable_rps(dev);
 
 	/* Cache mode state */
@@ -881,7 +886,7 @@
 		intel_init_emon(dev);
 	}
 
-	if (IS_GEN6(dev)) {
+	if (INTEL_INFO(dev)->gen >= 6) {
 		gen6_enable_rps(dev_priv);
 		gen6_update_ring_freq(dev_priv);
 	}
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 8af3735..dbda6e3 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -467,8 +467,12 @@
 struct bdb_edp {
 	struct edp_power_seq power_seqs[16];
 	u32 color_depth;
-	u32 sdrrs_msa_timing_delay;
 	struct edp_link_params link_params[16];
+	u32 sdrrs_msa_timing_delay;
+
+	/* ith bit indicates enabled/disabled for (i+1)th panel */
+	u16 edp_s3d_feature;
+	u16 edp_t3_optimization;
 } __attribute__ ((packed));
 
 void intel_setup_bios(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index fee0ad0..dd729d4 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -24,6 +24,7 @@
  *	Eric Anholt <eric@anholt.net>
  */
 
+#include <linux/dmi.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include "drmP.h"
@@ -540,6 +541,24 @@
 	.destroy = intel_encoder_destroy,
 };
 
+static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
+	return 1;
+}
+
+static const struct dmi_system_id intel_no_crt[] = {
+	{
+		.callback = intel_no_crt_dmi_callback,
+		.ident = "ACER ZGB",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
+		},
+	},
+	{ }
+};
+
 void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
@@ -547,6 +566,10 @@
 	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	/* Skip machines without VGA that falsely report hotplug events */
+	if (dmi_check_system(intel_no_crt))
+		return;
+
 	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
 	if (!crt)
 		return;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2a3f707..b3b51c4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5808,12 +5808,15 @@
 	if (is_lvds) {
 		temp = I915_READ(PCH_LVDS);
 		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-		if (HAS_PCH_CPT(dev))
+		if (HAS_PCH_CPT(dev)) {
+			temp &= ~PORT_TRANS_SEL_MASK;
 			temp |= PORT_TRANS_SEL_CPT(pipe);
-		else if (pipe == 1)
-			temp |= LVDS_PIPEB_SELECT;
-		else
-			temp &= ~LVDS_PIPEB_SELECT;
+		} else {
+			if (pipe == 1)
+				temp |= LVDS_PIPEB_SELECT;
+			else
+				temp &= ~LVDS_PIPEB_SELECT;
+		}
 
 		/* set the corresponsding LVDS_BORDER bit */
 		temp |= dev_priv->lvds_border_bits;
@@ -9025,12 +9028,9 @@
 
 	for (i = 0; i < dev_priv->num_pipe; i++) {
 		intel_crtc_init(dev, i);
-		if (HAS_PCH_SPLIT(dev)) {
-			ret = intel_plane_init(dev, i);
-			if (ret)
-				DRM_ERROR("plane %d init failed: %d\n",
-					  i, ret);
-		}
+		ret = intel_plane_init(dev, i);
+		if (ret)
+			DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
 	}
 
 	/* Just disable it once at startup */
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index e441911..798f6e1 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -708,6 +708,14 @@
 		},
 	},
 	{
+                .callback = intel_no_lvds_dmi_callback,
+                .ident = "Clientron E830",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "E830"),
+                },
+        },
+        {
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Asus EeeBox PC EB1007",
 		.matches = {
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 77e729d..1ab842c 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -636,6 +636,19 @@
 }
 
 static u32
+gen6_ring_get_seqno(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+
+	/* Workaround to force correct ordering between irq and seqno writes on
+	 * ivb (and maybe also on snb) by reading from a CS register (like
+	 * ACTHD) before reading the status page. */
+	if (IS_GEN7(dev))
+		intel_ring_get_active_head(ring);
+	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
+}
+
+static u32
 ring_get_seqno(struct intel_ring_buffer *ring)
 {
 	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
@@ -792,17 +805,6 @@
 }
 
 static bool
-gen7_blt_ring_get_irq(struct intel_ring_buffer *ring)
-{
-	/* The BLT ring on IVB appears to have broken synchronization
-	 * between the seqno write and the interrupt, so that the
-	 * interrupt appears first.  Returning false here makes
-	 * i915_wait_request() do a polling loop, instead.
-	 */
-	return false;
-}
-
-static bool
 gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
 {
 	struct drm_device *dev = ring->dev;
@@ -811,6 +813,12 @@
 	if (!dev->irq_enabled)
 	       return false;
 
+	/* It looks like we need to prevent the gt from suspending while waiting
+	 * for an notifiy irq, otherwise irqs seem to get lost on at least the
+	 * blt/bsd rings on ivb. */
+	if (IS_GEN7(dev))
+		gen6_gt_force_wake_get(dev_priv);
+
 	spin_lock(&ring->irq_lock);
 	if (ring->irq_refcount++ == 0) {
 		ring->irq_mask &= ~rflag;
@@ -835,6 +843,9 @@
 		ironlake_disable_irq(dev_priv, gflag);
 	}
 	spin_unlock(&ring->irq_lock);
+
+	if (IS_GEN7(dev))
+		gen6_gt_force_wake_put(dev_priv);
 }
 
 static bool
@@ -1341,7 +1352,7 @@
 	.write_tail		= gen6_bsd_ring_write_tail,
 	.flush			= gen6_ring_flush,
 	.add_request		= gen6_add_request,
-	.get_seqno		= ring_get_seqno,
+	.get_seqno		= gen6_ring_get_seqno,
 	.irq_get		= gen6_bsd_ring_get_irq,
 	.irq_put		= gen6_bsd_ring_put_irq,
 	.dispatch_execbuffer	= gen6_ring_dispatch_execbuffer,
@@ -1476,7 +1487,7 @@
 	.write_tail		= ring_write_tail,
 	.flush			= blt_ring_flush,
 	.add_request		= gen6_add_request,
-	.get_seqno		= ring_get_seqno,
+	.get_seqno		= gen6_ring_get_seqno,
 	.irq_get		= blt_ring_get_irq,
 	.irq_put		= blt_ring_put_irq,
 	.dispatch_execbuffer	= gen6_ring_dispatch_execbuffer,
@@ -1499,6 +1510,7 @@
 		ring->flush = gen6_render_ring_flush;
 		ring->irq_get = gen6_render_ring_get_irq;
 		ring->irq_put = gen6_render_ring_put_irq;
+		ring->get_seqno = gen6_ring_get_seqno;
 	} else if (IS_GEN5(dev)) {
 		ring->add_request = pc_render_add_request;
 		ring->get_seqno = pc_render_get_seqno;
@@ -1577,8 +1589,5 @@
 
 	*ring = gen6_blt_ring;
 
-	if (IS_GEN7(dev))
-		ring->irq_get = gen7_blt_ring_get_irq;
-
 	return intel_init_ring_buffer(dev, ring);
 }
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index f7b9268..e334ec3 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1066,15 +1066,13 @@
 
 	/* Set the SDVO control regs. */
 	if (INTEL_INFO(dev)->gen >= 4) {
-		sdvox = 0;
+		/* The real mode polarity is set by the SDVO commands, using
+		 * struct intel_sdvo_dtd. */
+		sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH;
 		if (intel_sdvo->is_hdmi)
 			sdvox |= intel_sdvo->color_range;
 		if (INTEL_INFO(dev)->gen < 5)
 			sdvox |= SDVO_BORDER_ENABLE;
-		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-			sdvox |= SDVO_VSYNC_ACTIVE_HIGH;
-		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-			sdvox |= SDVO_HSYNC_ACTIVE_HIGH;
 	} else {
 		sdvox = I915_READ(intel_sdvo->sdvo_reg);
 		switch (intel_sdvo->sdvo_reg) {
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index d13989f..2288abf 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -466,10 +466,8 @@
 	mutex_lock(&dev->struct_mutex);
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
-	if (ret) {
-		DRM_ERROR("failed to pin object\n");
+	if (ret)
 		goto out_unlock;
-	}
 
 	intel_plane->obj = obj;
 
@@ -632,10 +630,8 @@
 	unsigned long possible_crtcs;
 	int ret;
 
-	if (!(IS_GEN6(dev) || IS_GEN7(dev))) {
-		DRM_ERROR("new plane code only for SNB+\n");
+	if (!(IS_GEN6(dev) || IS_GEN7(dev)))
 		return -ENODEV;
-	}
 
 	intel_plane = kzalloc(sizeof(struct intel_plane), GFP_KERNEL);
 	if (!intel_plane)
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index f3c6a9a..1571be3 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -417,7 +417,7 @@
 	{
 		.name		= "NTSC-M",
 		.clock		= 108000,
-		.refresh	= 29970,
+		.refresh	= 59940,
 		.oversample	= TV_OVERSAMPLE_8X,
 		.component_only = 0,
 		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
@@ -460,7 +460,7 @@
 	{
 		.name		= "NTSC-443",
 		.clock		= 108000,
-		.refresh	= 29970,
+		.refresh	= 59940,
 		.oversample	= TV_OVERSAMPLE_8X,
 		.component_only = 0,
 		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */
@@ -502,7 +502,7 @@
 	{
 		.name		= "NTSC-J",
 		.clock		= 108000,
-		.refresh	= 29970,
+		.refresh	= 59940,
 		.oversample	= TV_OVERSAMPLE_8X,
 		.component_only = 0,
 
@@ -545,7 +545,7 @@
 	{
 		.name		= "PAL-M",
 		.clock		= 108000,
-		.refresh	= 29970,
+		.refresh	= 59940,
 		.oversample	= TV_OVERSAMPLE_8X,
 		.component_only = 0,
 
@@ -589,7 +589,7 @@
 		/* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
 		.name	    = "PAL-N",
 		.clock		= 108000,
-		.refresh	= 25000,
+		.refresh	= 50000,
 		.oversample	= TV_OVERSAMPLE_8X,
 		.component_only = 0,
 
@@ -634,7 +634,7 @@
 		/* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
 		.name	    = "PAL",
 		.clock		= 108000,
-		.refresh	= 25000,
+		.refresh	= 50000,
 		.oversample	= TV_OVERSAMPLE_8X,
 		.component_only = 0,
 
@@ -674,78 +674,6 @@
 		.filter_table = filter_table,
 	},
 	{
-		.name       = "480p@59.94Hz",
-		.clock		= 107520,
-		.refresh	= 59940,
-		.oversample     = TV_OVERSAMPLE_4X,
-		.component_only = 1,
-
-		.hsync_end      = 64,               .hblank_end         = 122,
-		.hblank_start   = 842,              .htotal             = 857,
-
-		.progressive    = true,		    .trilevel_sync = false,
-
-		.vsync_start_f1 = 12,               .vsync_start_f2     = 12,
-		.vsync_len      = 12,
-
-		.veq_ena        = false,
-
-		.vi_end_f1      = 44,               .vi_end_f2          = 44,
-		.nbr_end        = 479,
-
-		.burst_ena      = false,
-
-		.filter_table = filter_table,
-	},
-	{
-		.name       = "480p@60Hz",
-		.clock		= 107520,
-		.refresh	= 60000,
-		.oversample     = TV_OVERSAMPLE_4X,
-		.component_only = 1,
-
-		.hsync_end      = 64,               .hblank_end         = 122,
-		.hblank_start   = 842,              .htotal             = 856,
-
-		.progressive    = true,		    .trilevel_sync = false,
-
-		.vsync_start_f1 = 12,               .vsync_start_f2     = 12,
-		.vsync_len      = 12,
-
-		.veq_ena        = false,
-
-		.vi_end_f1      = 44,               .vi_end_f2          = 44,
-		.nbr_end        = 479,
-
-		.burst_ena      = false,
-
-		.filter_table = filter_table,
-	},
-	{
-		.name       = "576p",
-		.clock		= 107520,
-		.refresh	= 50000,
-		.oversample     = TV_OVERSAMPLE_4X,
-		.component_only = 1,
-
-		.hsync_end      = 64,               .hblank_end         = 139,
-		.hblank_start   = 859,              .htotal             = 863,
-
-		.progressive    = true,		.trilevel_sync = false,
-
-		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
-		.vsync_len      = 10,
-
-		.veq_ena        = false,
-
-		.vi_end_f1      = 48,               .vi_end_f2          = 48,
-		.nbr_end        = 575,
-
-		.burst_ena      = false,
-
-		.filter_table = filter_table,
-	},
-	{
 		.name       = "720p@60Hz",
 		.clock		= 148800,
 		.refresh	= 60000,
@@ -770,30 +698,6 @@
 		.filter_table = filter_table,
 	},
 	{
-		.name       = "720p@59.94Hz",
-		.clock		= 148800,
-		.refresh	= 59940,
-		.oversample     = TV_OVERSAMPLE_2X,
-		.component_only = 1,
-
-		.hsync_end      = 80,               .hblank_end         = 300,
-		.hblank_start   = 1580,             .htotal             = 1651,
-
-		.progressive	= true,		    .trilevel_sync = true,
-
-		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
-		.vsync_len      = 10,
-
-		.veq_ena        = false,
-
-		.vi_end_f1      = 29,               .vi_end_f2          = 29,
-		.nbr_end        = 719,
-
-		.burst_ena      = false,
-
-		.filter_table = filter_table,
-	},
-	{
 		.name       = "720p@50Hz",
 		.clock		= 148800,
 		.refresh	= 50000,
@@ -821,7 +725,7 @@
 	{
 		.name       = "1080i@50Hz",
 		.clock		= 148800,
-		.refresh	= 25000,
+		.refresh	= 50000,
 		.oversample     = TV_OVERSAMPLE_2X,
 		.component_only = 1,
 
@@ -847,7 +751,7 @@
 	{
 		.name       = "1080i@60Hz",
 		.clock		= 148800,
-		.refresh	= 30000,
+		.refresh	= 60000,
 		.oversample     = TV_OVERSAMPLE_2X,
 		.component_only = 1,
 
@@ -870,32 +774,6 @@
 
 		.filter_table = filter_table,
 	},
-	{
-		.name       = "1080i@59.94Hz",
-		.clock		= 148800,
-		.refresh	= 29970,
-		.oversample     = TV_OVERSAMPLE_2X,
-		.component_only = 1,
-
-		.hsync_end      = 88,               .hblank_end         = 235,
-		.hblank_start   = 2155,             .htotal             = 2201,
-
-		.progressive	= false,	    .trilevel_sync = true,
-
-		.vsync_start_f1 = 4,            .vsync_start_f2    = 5,
-		.vsync_len      = 10,
-
-		.veq_ena	= true,		    .veq_start_f1	= 4,
-		.veq_start_f2	= 4,		.veq_len	  = 10,
-
-
-		.vi_end_f1	= 21,		.vi_end_f2	  = 22,
-		.nbr_end        = 539,
-
-		.burst_ena      = false,
-
-		.filter_table = filter_table,
-	},
 };
 
 static struct intel_tv *enc_to_intel_tv(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 7bb1b07..e2a393f 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -897,6 +897,7 @@
 	i2c->rec = *rec;
 	i2c->adapter.owner = THIS_MODULE;
 	i2c->adapter.class = I2C_CLASS_DDC;
+	i2c->adapter.dev.parent = &dev->pdev->dev;
 	i2c->dev = dev;
 	i2c_set_adapdata(&i2c->adapter, i2c);
 	if (rec->mm_i2c ||
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 0af6ebd..b66ef0e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -378,7 +378,7 @@
 				  unsigned int *handle)
 {
 	if (handle)
-		handle = 0;
+		*handle = 0;
 
 	return 0;
 }
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 92f9497..6dbfd3e 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -283,11 +283,11 @@
 
 static inline u8 temp_to_reg(long val)
 {
-	if (val < 0)
-		val = 0;
-	else if (val > 1000 * 0xff)
-		val = 0xff;
-	return ((val + 500) / 1000);
+	if (val <= 0)
+		return 0;
+	if (val >= 1000 * 0xff)
+		return 0xff;
+	return (val + 500) / 1000;
 }
 
 /*
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 6ddeae0..91fdd1f 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -883,7 +883,7 @@
 
 static int __devinit sht15_probe(struct platform_device *pdev)
 {
-	int ret = 0;
+	int ret;
 	struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
 	u8 status = 0;
 
@@ -901,6 +901,7 @@
 	init_waitqueue_head(&data->wait_queue);
 
 	if (pdev->dev.platform_data == NULL) {
+		ret = -EINVAL;
 		dev_err(&pdev->dev, "no platform data supplied\n");
 		goto err_free_data;
 	}
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 0e0af04..2dfae7d 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1319,6 +1319,7 @@
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct w83627ehf_sio_data *sio_data = dev->platform_data;
 	int nr = sensor_attr->index;
 	unsigned long val;
 	int err;
@@ -1330,6 +1331,11 @@
 
 	if (val > 1)
 		return -EINVAL;
+
+	/* On NCT67766F, DC mode is only supported for pwm1 */
+	if (sio_data->kind == nct6776 && nr && val != 1)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
 	reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
 	data->pwm_mode[nr] = val;
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index b37b0c0..5034a87 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -808,9 +808,12 @@
 		return PTR_ERR(ctx);
 
 	if (cmd.conn_param.valid) {
-		ctx->uid = cmd.uid;
 		ucma_copy_conn_param(&conn_param, &cmd.conn_param);
+		mutex_lock(&file->mut);
 		ret = rdma_accept(ctx->cm_id, &conn_param);
+		if (!ret)
+			ctx->uid = cmd.uid;
+		mutex_unlock(&file->mut);
 	} else
 		ret = rdma_accept(ctx->cm_id, NULL);
 
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index b930da4..4d27e4c 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -1485,6 +1485,7 @@
 		qp->event_handler = attr.event_handler;
 		qp->qp_context	  = attr.qp_context;
 		qp->qp_type	  = attr.qp_type;
+		atomic_set(&qp->usecnt, 0);
 		atomic_inc(&pd->usecnt);
 		atomic_inc(&attr.send_cq->usecnt);
 		if (attr.recv_cq)
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 602b1bd..575b780 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -421,6 +421,7 @@
 		qp->uobject    = NULL;
 		qp->qp_type    = qp_init_attr->qp_type;
 
+		atomic_set(&qp->usecnt, 0);
 		if (qp_init_attr->qp_type == IB_QPT_XRC_TGT) {
 			qp->event_handler = __ib_shared_qp_event_handler;
 			qp->qp_context = qp;
@@ -430,7 +431,6 @@
 			qp->xrcd = qp_init_attr->xrcd;
 			atomic_inc(&qp_init_attr->xrcd->usecnt);
 			INIT_LIST_HEAD(&qp->open_list);
-			atomic_set(&qp->usecnt, 0);
 
 			real_qp = qp;
 			qp = __ib_open_qp(real_qp, qp_init_attr->event_handler,
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index b7d4216..a4de9d5 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -89,7 +89,7 @@
 		error = ipathfs_mknod(parent->d_inode, *dentry,
 				      mode, fops, data);
 	else
-		error = PTR_ERR(dentry);
+		error = PTR_ERR(*dentry);
 	mutex_unlock(&parent->d_inode->i_mutex);
 
 	return error;
diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index 95c94d8..259b067 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -257,12 +257,9 @@
 			return IB_MAD_RESULT_SUCCESS;
 
 		/*
-		 * Don't process SMInfo queries or vendor-specific
-		 * MADs -- the SMA can't handle them.
+		 * Don't process SMInfo queries -- the SMA can't handle them.
 		 */
-		if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_SM_INFO ||
-		    ((in_mad->mad_hdr.attr_id & IB_SMP_ATTR_VENDOR_MASK) ==
-		     IB_SMP_ATTR_VENDOR_MASK))
+		if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_SM_INFO)
 			return IB_MAD_RESULT_SUCCESS;
 	} else if (in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT ||
 		   in_mad->mad_hdr.mgmt_class == MLX4_IB_VENDOR_CLASS1   ||
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 7013da5..7140199 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index 568b4f1..c438e46 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 425065b..a4972ab 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -233,6 +233,7 @@
 	u8 *start_ptr = &start_addr;
 	u8 **start_buff = &start_ptr;
 	u16 buff_len = 0;
+	struct ietf_mpa_v1 *mpa_frame;
 
 	skb = dev_alloc_skb(MAX_CM_BUFFER);
 	if (!skb) {
@@ -242,6 +243,8 @@
 
 	/* send an MPA reject frame */
 	cm_build_mpa_frame(cm_node, start_buff, &buff_len, NULL, MPA_KEY_REPLY);
+	mpa_frame = (struct ietf_mpa_v1 *)*start_buff;
+	mpa_frame->flags |= IETF_MPA_FLAGS_REJECT;
 	form_cm_frame(skb, cm_node, NULL, 0, *start_buff, buff_len, SET_ACK | SET_FIN);
 
 	cm_node->state = NES_CM_STATE_FIN_WAIT1;
@@ -1360,8 +1363,7 @@
 				if (!memcmp(nesadapter->arp_table[arpindex].mac_addr,
 					    neigh->ha, ETH_ALEN)) {
 					/* Mac address same as in nes_arp_table */
-					ip_rt_put(rt);
-					return rc;
+					goto out;
 				}
 
 				nes_manage_arp_cache(nesvnic->netdev,
@@ -1377,6 +1379,8 @@
 			neigh_event_send(neigh, NULL);
 		}
 	}
+
+out:
 	rcu_read_unlock();
 	ip_rt_put(rt);
 	return rc;
diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h
index bdfa1fb..4646e66 100644
--- a/drivers/infiniband/hw/nes/nes_cm.h
+++ b/drivers/infiniband/hw/nes/nes_cm.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_context.h b/drivers/infiniband/hw/nes/nes_context.h
index b4393a1..a69eef1 100644
--- a/drivers/infiniband/hw/nes/nes_context.h
+++ b/drivers/infiniband/hw/nes/nes_context.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 055f4b5..d42c9f4 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 0b590e1..d748e4b 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -1,5 +1,5 @@
 /*
-* Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+* Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_mgt.c b/drivers/infiniband/hw/nes/nes_mgt.c
index b3b2a24..3ba7be3 100644
--- a/drivers/infiniband/hw/nes/nes_mgt.c
+++ b/drivers/infiniband/hw/nes/nes_mgt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel-NE, Inc.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel-NE, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_mgt.h b/drivers/infiniband/hw/nes/nes_mgt.h
index 8c8af25..4f7f701 100644
--- a/drivers/infiniband/hw/nes/nes_mgt.h
+++ b/drivers/infiniband/hw/nes/nes_mgt.h
@@ -1,5 +1,5 @@
 /*
-* Copyright (c) 2010 Intel-NE, Inc.  All rights reserved.
+* Copyright (c) 2006 - 2011 Intel-NE, Inc.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 4b3fa71..f3a3ecf 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_user.h b/drivers/infiniband/hw/nes/nes_user.h
index 71e133a..4926de7 100644
--- a/drivers/infiniband/hw/nes/nes_user.h
+++ b/drivers/infiniband/hw/nes/nes_user.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  * Copyright (c) 2005 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005 Cisco Systems.  All rights reserved.
  * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c
index 8b4c2ff..e98f4fc 100644
--- a/drivers/infiniband/hw/nes/nes_utils.c
+++ b/drivers/infiniband/hw/nes/nes_utils.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 5095bc4..0927b5c 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -3428,6 +3428,8 @@
 					    NES_IWARP_SQ_FMR_WQE_LENGTH_LOW_IDX,
 					    ib_wr->wr.fast_reg.length);
 			set_wqe_32bit_value(wqe->wqe_words,
+					    NES_IWARP_SQ_FMR_WQE_LENGTH_HIGH_IDX, 0);
+			set_wqe_32bit_value(wqe->wqe_words,
 					    NES_IWARP_SQ_FMR_WQE_MR_STAG_IDX,
 					    ib_wr->wr.fast_reg.rkey);
 			/* Set page size: */
@@ -3724,7 +3726,7 @@
 						entry->opcode = IB_WC_SEND;
 						break;
 					case NES_IWARP_SQ_OP_LOCINV:
-						entry->opcode = IB_WR_LOCAL_INV;
+						entry->opcode = IB_WC_LOCAL_INV;
 						break;
 					case NES_IWARP_SQ_OP_FAST_REG:
 						entry->opcode = IB_WC_FAST_REG_MR;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h
index fe6b6e9..0eff7c4 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.h
+++ b/drivers/infiniband/hw/nes/nes_verbs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
  * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 4f18e2d..d0c64d5 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -2105,7 +2105,7 @@
 	dd->cspec->dummy_hdrq = dma_alloc_coherent(&dd->pcidev->dev,
 					dd->rcd[0]->rcvhdrq_size,
 					&dd->cspec->dummy_hdrq_phys,
-					GFP_KERNEL | __GFP_COMP);
+					GFP_ATOMIC | __GFP_COMP);
 	if (!dd->cspec->dummy_hdrq) {
 		qib_devinfo(dd->pcidev, "Couldn't allocate dummy hdrq\n");
 		/* fallback to just 0'ing */
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index f695061..0fde788 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -560,7 +560,7 @@
  * BIOS may not set PCIe bus-utilization parameters for best performance.
  * Check and optionally adjust them to maximize our throughput.
  */
-static int qib_pcie_caps = 0x51;
+static int qib_pcie_caps;
 module_param_named(pcie_caps, qib_pcie_caps, int, S_IRUGO);
 MODULE_PARM_DESC(pcie_caps, "Max PCIe tuning: Payload (0..3), ReadReq (4..7)");
 
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 1455e26..cf0c318 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -887,8 +887,7 @@
 
 		/* attach demod */
 		adap->fe_adap[state->fe_id].fe = dvb_attach(cxd2820r_attach,
-				&anysee_cxd2820r_config, &adap->dev->i2c_adap,
-				NULL);
+				&anysee_cxd2820r_config, &adap->dev->i2c_adap);
 
 		state->has_ci = true;
 
@@ -1189,6 +1188,14 @@
 	if (ret)
 		return ret;
 
+	ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07);
+	if (ret)
+		return ret;
+
+	ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07);
+	if (ret)
+		return ret;
+
 	ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1);
 	if (ret)
 		return ret;
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c
index 8a57ed8..1efc028 100644
--- a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c
+++ b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c
@@ -276,14 +276,15 @@
 	param.flags = 0;
 
 	switch (fep->bandwidth_hz) {
+	default:
 	case 8000000:
-		param.bandwidth = 0;
+		param.bandwidth = 8;
 		break;
 	case 7000000:
-		param.bandwidth = 1;
+		param.bandwidth = 7;
 		break;
 	case 6000000:
-		param.bandwidth = 2;
+		param.bandwidth = 6;
 		break;
 	}
 
diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb/frontends/cxd2820r.h
index cf0f546..5aa306e 100644
--- a/drivers/media/dvb/frontends/cxd2820r.h
+++ b/drivers/media/dvb/frontends/cxd2820r.h
@@ -77,14 +77,12 @@
 	(defined(CONFIG_DVB_CXD2820R_MODULE) && defined(MODULE))
 extern struct dvb_frontend *cxd2820r_attach(
 	const struct cxd2820r_config *config,
-	struct i2c_adapter *i2c,
-	struct dvb_frontend *fe
+	struct i2c_adapter *i2c
 );
 #else
 static inline struct dvb_frontend *cxd2820r_attach(
 	const struct cxd2820r_config *config,
-	struct i2c_adapter *i2c,
-	struct dvb_frontend *fe
+	struct i2c_adapter *i2c
 )
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c
index caae7f7..5c7c2aa 100644
--- a/drivers/media/dvb/frontends/cxd2820r_core.c
+++ b/drivers/media/dvb/frontends/cxd2820r_core.c
@@ -482,10 +482,19 @@
 
 	/* switch between DVB-T and DVB-T2 when tune fails */
 	if (priv->last_tune_failed) {
-		if (priv->delivery_system == SYS_DVBT)
+		if (priv->delivery_system == SYS_DVBT) {
+			ret = cxd2820r_sleep_t(fe);
+			if (ret)
+				goto error;
+
 			c->delivery_system = SYS_DVBT2;
-		else if (priv->delivery_system == SYS_DVBT2)
+		} else if (priv->delivery_system == SYS_DVBT2) {
+			ret = cxd2820r_sleep_t2(fe);
+			if (ret)
+				goto error;
+
 			c->delivery_system = SYS_DVBT;
+		}
 	}
 
 	/* set frontend */
@@ -562,7 +571,7 @@
 	.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
 	/* default: DVB-T/T2 */
 	.info = {
-		.name = "Sony CXD2820R (DVB-T/T2)",
+		.name = "Sony CXD2820R",
 
 		.caps =	FE_CAN_FEC_1_2			|
 			FE_CAN_FEC_2_3			|
@@ -572,7 +581,9 @@
 			FE_CAN_FEC_AUTO			|
 			FE_CAN_QPSK			|
 			FE_CAN_QAM_16			|
+			FE_CAN_QAM_32			|
 			FE_CAN_QAM_64			|
+			FE_CAN_QAM_128			|
 			FE_CAN_QAM_256			|
 			FE_CAN_QAM_AUTO			|
 			FE_CAN_TRANSMISSION_MODE_AUTO	|
@@ -602,8 +613,7 @@
 };
 
 struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg,
-				     struct i2c_adapter *i2c,
-				     struct dvb_frontend *fe)
+		struct i2c_adapter *i2c)
 {
 	struct cxd2820r_priv *priv = NULL;
 	int ret;
diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
index 9fe4519..ec3f6a0 100644
--- a/drivers/media/video/atmel-isi.c
+++ b/drivers/media/video/atmel-isi.c
@@ -922,7 +922,9 @@
 			isi->fb_descriptors_phys);
 
 	iounmap(isi->regs);
+	clk_unprepare(isi->mck);
 	clk_put(isi->mck);
+	clk_unprepare(isi->pclk);
 	clk_put(isi->pclk);
 	kfree(isi);
 
@@ -955,6 +957,10 @@
 	if (IS_ERR(pclk))
 		return PTR_ERR(pclk);
 
+	ret = clk_prepare(pclk);
+	if (ret)
+		goto err_clk_prepare_pclk;
+
 	isi = kzalloc(sizeof(struct atmel_isi), GFP_KERNEL);
 	if (!isi) {
 		ret = -ENOMEM;
@@ -978,6 +984,10 @@
 		goto err_clk_get;
 	}
 
+	ret = clk_prepare(isi->mck);
+	if (ret)
+		goto err_clk_prepare_mck;
+
 	/* Set ISI_MCK's frequency, it should be faster than pixel clock */
 	ret = clk_set_rate(isi->mck, pdata->mck_hz);
 	if (ret < 0)
@@ -1059,10 +1069,14 @@
 			isi->fb_descriptors_phys);
 err_alloc_descriptors:
 err_set_mck_rate:
+	clk_unprepare(isi->mck);
+err_clk_prepare_mck:
 	clk_put(isi->mck);
 err_clk_get:
 	kfree(isi);
 err_alloc_isi:
+	clk_unprepare(pclk);
+err_clk_prepare_pclk:
 	clk_put(pclk);
 
 	return ret;
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 9449423..aabbf48 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -853,8 +853,7 @@
 	case EM28174_BOARD_PCTV_290E:
 		dvb->fe[0] = dvb_attach(cxd2820r_attach,
 					&em28xx_cxd2820r_config,
-					&dev->i2c_adap,
-					NULL);
+					&dev->i2c_adap);
 		if (dvb->fe[0]) {
 			/* FE 0 attach tuner */
 			if (!dvb_attach(tda18271_attach,
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 63be60b..86cc3f7 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -26,35 +26,9 @@
 #define to_mcp(d)		container_of(d, struct mcp, attached_device)
 #define to_mcp_driver(d)	container_of(d, struct mcp_driver, drv)
 
-static const struct mcp_device_id *mcp_match_id(const struct mcp_device_id *id,
-						const char *codec)
-{
-	while (id->name[0]) {
-		if (strcmp(codec, id->name) == 0)
-			return id;
-		id++;
-	}
-	return NULL;
-}
-
-const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp)
-{
-	const struct mcp_driver *driver =
-		to_mcp_driver(mcp->attached_device.driver);
-
-	return mcp_match_id(driver->id_table, mcp->codec);
-}
-EXPORT_SYMBOL(mcp_get_device_id);
-
 static int mcp_bus_match(struct device *dev, struct device_driver *drv)
 {
-	const struct mcp *mcp = to_mcp(dev);
-	const struct mcp_driver *driver = to_mcp_driver(drv);
-
-	if (driver->id_table)
-		return !!mcp_match_id(driver->id_table, mcp->codec);
-
-	return 0;
+	return 1;
 }
 
 static int mcp_bus_probe(struct device *dev)
@@ -100,18 +74,9 @@
 	return ret;
 }
 
-static int mcp_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct mcp *mcp = to_mcp(dev);
-
-	add_uevent_var(env, "MODALIAS=%s%s", MCP_MODULE_PREFIX, mcp->codec);
-	return 0;
-}
-
 static struct bus_type mcp_bus_type = {
 	.name		= "mcp",
 	.match		= mcp_bus_match,
-	.uevent		= mcp_bus_uevent,
 	.probe		= mcp_bus_probe,
 	.remove		= mcp_bus_remove,
 	.suspend	= mcp_bus_suspend,
@@ -128,9 +93,11 @@
  */
 void mcp_set_telecom_divisor(struct mcp *mcp, unsigned int div)
 {
-	spin_lock_irq(&mcp->lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mcp->lock, flags);
 	mcp->ops->set_telecom_divisor(mcp, div);
-	spin_unlock_irq(&mcp->lock);
+	spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_set_telecom_divisor);
 
@@ -143,9 +110,11 @@
  */
 void mcp_set_audio_divisor(struct mcp *mcp, unsigned int div)
 {
-	spin_lock_irq(&mcp->lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mcp->lock, flags);
 	mcp->ops->set_audio_divisor(mcp, div);
-	spin_unlock_irq(&mcp->lock);
+	spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_set_audio_divisor);
 
@@ -198,10 +167,11 @@
  */
 void mcp_enable(struct mcp *mcp)
 {
-	spin_lock_irq(&mcp->lock);
+	unsigned long flags;
+	spin_lock_irqsave(&mcp->lock, flags);
 	if (mcp->use_count++ == 0)
 		mcp->ops->enable(mcp);
-	spin_unlock_irq(&mcp->lock);
+	spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_enable);
 
@@ -247,14 +217,9 @@
 }
 EXPORT_SYMBOL(mcp_host_alloc);
 
-int mcp_host_register(struct mcp *mcp, void *pdata)
+int mcp_host_register(struct mcp *mcp)
 {
-	if (!mcp->codec)
-		return -EINVAL;
-
-	mcp->attached_device.platform_data = pdata;
 	dev_set_name(&mcp->attached_device, "mcp0");
-	request_module("%s%s", MCP_MODULE_PREFIX, mcp->codec);
 	return device_register(&mcp->attached_device);
 }
 EXPORT_SYMBOL(mcp_host_register);
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 9adc2eb..02c53a0 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -19,7 +19,6 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/mcp.h>
-#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
@@ -27,19 +26,12 @@
 #include <asm/system.h>
 #include <mach/mcp.h>
 
-/* Register offsets */
-#define MCCR0	0x00
-#define MCDR0	0x08
-#define MCDR1	0x0C
-#define MCDR2	0x10
-#define MCSR	0x18
-#define MCCR1	0x00
+#include <mach/assabet.h>
+
 
 struct mcp_sa11x0 {
-	u32		mccr0;
-	u32		mccr1;
-	unsigned char	*mccr0_base;
-	unsigned char	*mccr1_base;
+	u32	mccr0;
+	u32	mccr1;
 };
 
 #define priv(mcp)	((struct mcp_sa11x0 *)mcp_priv(mcp))
@@ -47,25 +39,25 @@
 static void
 mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	struct mcp_sa11x0 *priv = priv(mcp);
+	unsigned int mccr0;
 
 	divisor /= 32;
 
-	priv->mccr0 &= ~0x00007f00;
-	priv->mccr0 |= divisor << 8;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+	mccr0 = Ser4MCCR0 & ~0x00007f00;
+	mccr0 |= divisor << 8;
+	Ser4MCCR0 = mccr0;
 }
 
 static void
 mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	struct mcp_sa11x0 *priv = priv(mcp);
+	unsigned int mccr0;
 
 	divisor /= 32;
 
-	priv->mccr0 &= ~0x0000007f;
-	priv->mccr0 |= divisor;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+	mccr0 = Ser4MCCR0 & ~0x0000007f;
+	mccr0 |= divisor;
+	Ser4MCCR0 = mccr0;
 }
 
 /*
@@ -79,16 +71,12 @@
 {
 	int ret = -ETIME;
 	int i;
-	u32 mcpreg;
-	struct mcp_sa11x0 *priv = priv(mcp);
 
-	mcpreg = reg << 17 | MCDR2_Wr | (val & 0xffff);
-	__raw_writel(mcpreg, priv->mccr0_base + MCDR2);
+	Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		mcpreg = __raw_readl(priv->mccr0_base + MCSR);
-		if (mcpreg & MCSR_CWC) {
+		if (Ser4MCSR & MCSR_CWC) {
 			ret = 0;
 			break;
 		}
@@ -109,18 +97,13 @@
 {
 	int ret = -ETIME;
 	int i;
-	u32 mcpreg;
-	struct mcp_sa11x0 *priv = priv(mcp);
 
-	mcpreg = reg << 17 | MCDR2_Rd;
-	__raw_writel(mcpreg, priv->mccr0_base + MCDR2);
+	Ser4MCDR2 = reg << 17 | MCDR2_Rd;
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		mcpreg = __raw_readl(priv->mccr0_base + MCSR);
-		if (mcpreg & MCSR_CRC) {
-			ret = __raw_readl(priv->mccr0_base + MCDR2)
-				& 0xffff;
+		if (Ser4MCSR & MCSR_CRC) {
+			ret = Ser4MCDR2 & 0xffff;
 			break;
 		}
 	}
@@ -133,19 +116,13 @@
 
 static void mcp_sa11x0_enable(struct mcp *mcp)
 {
-	struct mcp_sa11x0 *priv = priv(mcp);
-
-	__raw_writel(-1, priv->mccr0_base + MCSR);
-	priv->mccr0 |= MCCR0_MCE;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+	Ser4MCSR = -1;
+	Ser4MCCR0 |= MCCR0_MCE;
 }
 
 static void mcp_sa11x0_disable(struct mcp *mcp)
 {
-	struct mcp_sa11x0 *priv = priv(mcp);
-
-	priv->mccr0 &= ~MCCR0_MCE;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+	Ser4MCCR0 &= ~MCCR0_MCE;
 }
 
 /*
@@ -165,69 +142,50 @@
 	struct mcp_plat_data *data = pdev->dev.platform_data;
 	struct mcp *mcp;
 	int ret;
-	struct mcp_sa11x0 *priv;
-	struct resource *res_mem0, *res_mem1;
-	u32 size0, size1;
 
 	if (!data)
 		return -ENODEV;
 
-	if (!data->codec)
-		return -ENODEV;
-
-	res_mem0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res_mem0)
-		return -ENODEV;
-	size0 = res_mem0->end - res_mem0->start + 1;
-
-	res_mem1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res_mem1)
-		return -ENODEV;
-	size1 = res_mem1->end - res_mem1->start + 1;
-
-	if (!request_mem_region(res_mem0->start, size0, "sa11x0-mcp"))
+	if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
 		return -EBUSY;
 
-	if (!request_mem_region(res_mem1->start, size1, "sa11x0-mcp")) {
-		ret = -EBUSY;
-		goto release;
-	}
-
 	mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
 	if (!mcp) {
 		ret = -ENOMEM;
-		goto release2;
+		goto release;
 	}
 
-	priv = priv(mcp);
-
 	mcp->owner		= THIS_MODULE;
 	mcp->ops		= &mcp_sa11x0;
 	mcp->sclk_rate		= data->sclk_rate;
-	mcp->dma_audio_rd	= DDAR_DevAdd(res_mem0->start + MCDR0)
-				+ DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev;
-	mcp->dma_audio_wr	= DDAR_DevAdd(res_mem0->start + MCDR0)
-				+ DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev;
-	mcp->dma_telco_rd	= DDAR_DevAdd(res_mem0->start + MCDR1)
-				+ DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev;
-	mcp->dma_telco_wr	= DDAR_DevAdd(res_mem0->start + MCDR1)
-				+ DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev;
-	mcp->codec		= data->codec;
+	mcp->dma_audio_rd	= DMA_Ser4MCP0Rd;
+	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
+	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
+	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
+	mcp->gpio_base		= data->gpio_base;
 
 	platform_set_drvdata(pdev, mcp);
 
+	if (machine_is_assabet()) {
+		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+	}
+
+	/*
+	 * Setup the PPC unit correctly.
+	 */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
 	/*
 	 * Initialise device.  Note that we initially
 	 * set the sampling rate to minimum.
 	 */
-	priv->mccr0_base = ioremap(res_mem0->start, size0);
-	priv->mccr1_base = ioremap(res_mem1->start, size1);
-
-	__raw_writel(-1, priv->mccr0_base + MCSR);
-	priv->mccr1 = data->mccr1;
-	priv->mccr0 = data->mccr0 | 0x7f7f;
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
-	__raw_writel(priv->mccr1, priv->mccr1_base + MCCR1);
+	Ser4MCSR = -1;
+	Ser4MCCR1 = data->mccr1;
+	Ser4MCCR0 = data->mccr0 | 0x7f7f;
 
 	/*
 	 * Calculate the read/write timeout (us) from the bit clock
@@ -237,53 +195,36 @@
 	mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
 			  mcp->sclk_rate;
 
-	ret = mcp_host_register(mcp, data->codec_pdata);
+	ret = mcp_host_register(mcp);
 	if (ret == 0)
 		goto out;
 
- release2:
-	release_mem_region(res_mem1->start, size1);
  release:
-	release_mem_region(res_mem0->start, size0);
+	release_mem_region(0x80060000, 0x60);
 	platform_set_drvdata(pdev, NULL);
 
  out:
 	return ret;
 }
 
-static int mcp_sa11x0_remove(struct platform_device *pdev)
+static int mcp_sa11x0_remove(struct platform_device *dev)
 {
-	struct mcp *mcp = platform_get_drvdata(pdev);
-	struct mcp_sa11x0 *priv = priv(mcp);
-	struct resource *res_mem;
-	u32 size;
+	struct mcp *mcp = platform_get_drvdata(dev);
 
-	platform_set_drvdata(pdev, NULL);
+	platform_set_drvdata(dev, NULL);
 	mcp_host_unregister(mcp);
+	release_mem_region(0x80060000, 0x60);
 
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res_mem) {
-		size = res_mem->end - res_mem->start + 1;
-		release_mem_region(res_mem->start, size);
-	}
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (res_mem) {
-		size = res_mem->end - res_mem->start + 1;
-		release_mem_region(res_mem->start, size);
-	}
-	iounmap(priv->mccr0_base);
-	iounmap(priv->mccr1_base);
 	return 0;
 }
 
 static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct mcp *mcp = platform_get_drvdata(dev);
-	struct mcp_sa11x0 *priv = priv(mcp);
-	u32 mccr0;
 
-	mccr0 = priv->mccr0 & ~MCCR0_MCE;
-	__raw_writel(mccr0, priv->mccr0_base + MCCR0);
+	priv(mcp)->mccr0 = Ser4MCCR0;
+	priv(mcp)->mccr1 = Ser4MCCR1;
+	Ser4MCCR0 &= ~MCCR0_MCE;
 
 	return 0;
 }
@@ -291,10 +232,9 @@
 static int mcp_sa11x0_resume(struct platform_device *dev)
 {
 	struct mcp *mcp = platform_get_drvdata(dev);
-	struct mcp_sa11x0 *priv = priv(mcp);
 
-	__raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
-	__raw_writel(priv->mccr1, priv->mccr1_base + MCCR1);
+	Ser4MCCR1 = priv(mcp)->mccr1;
+	Ser4MCCR0 = priv(mcp)->mccr0;
 
 	return 0;
 }
@@ -311,7 +251,6 @@
 	.resume		= mcp_sa11x0_resume,
 	.driver		= {
 		.name	= "sa11x0-mcp",
-		.owner  = THIS_MODULE,
 	},
 };
 
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 91c4f25..febc90c 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -36,15 +36,6 @@
 static LIST_HEAD(ucb1x00_drivers);
 static LIST_HEAD(ucb1x00_devices);
 
-static struct mcp_device_id ucb1x00_id[] = {
-	{ "ucb1x00", 0 },  /* auto-detection */
-	{ "ucb1200", UCB_ID_1200 },
-	{ "ucb1300", UCB_ID_1300 },
-	{ "tc35143", UCB_ID_TC35143 },
-	{ }
-};
-MODULE_DEVICE_TABLE(mcp, ucb1x00_id);
-
 /**
  *	ucb1x00_io_set_dir - set IO direction
  *	@ucb: UCB1x00 structure describing chip
@@ -157,16 +148,22 @@
 {
 	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
 	unsigned long flags;
+	unsigned old, mask = 1 << offset;
 
 	spin_lock_irqsave(&ucb->io_lock, flags);
-	ucb->io_dir |= (1 << offset);
-	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
-
+	old = ucb->io_out;
 	if (value)
-		ucb->io_out |= 1 << offset;
+		ucb->io_out |= mask;
 	else
-		ucb->io_out &= ~(1 << offset);
-	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+		ucb->io_out &= ~mask;
+
+	if (old != ucb->io_out)
+		ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+
+	if (!(ucb->io_dir & mask)) {
+		ucb->io_dir |= mask;
+		ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+	}
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 
 	return 0;
@@ -536,33 +533,17 @@
 
 static int ucb1x00_probe(struct mcp *mcp)
 {
-	const struct mcp_device_id *mid;
 	struct ucb1x00 *ucb;
 	struct ucb1x00_driver *drv;
-	struct ucb1x00_plat_data *pdata;
 	unsigned int id;
 	int ret = -ENODEV;
 	int temp;
 
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
-	mid = mcp_get_device_id(mcp);
 
-	if (mid && mid->driver_data) {
-		if (id != mid->driver_data) {
-			printk(KERN_WARNING "%s wrong ID %04x found: %04x\n",
-				mid->name, (unsigned int) mid->driver_data, id);
-			goto err_disable;
-		}
-	} else {
-		mid = &ucb1x00_id[1];
-		while (mid->driver_data) {
-			if (id == mid->driver_data)
-				break;
-			mid++;
-		}
-		printk(KERN_WARNING "%s ID not found: %04x\n",
-			ucb1x00_id[0].name, id);
+	if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
+		printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
 		goto err_disable;
 	}
 
@@ -571,28 +552,28 @@
 	if (!ucb)
 		goto err_disable;
 
-	pdata = mcp->attached_device.platform_data;
+
 	ucb->dev.class = &ucb1x00_class;
 	ucb->dev.parent = &mcp->attached_device;
-	dev_set_name(&ucb->dev, mid->name);
+	dev_set_name(&ucb->dev, "ucb1x00");
 
 	spin_lock_init(&ucb->lock);
 	spin_lock_init(&ucb->io_lock);
 	sema_init(&ucb->adc_sem, 1);
 
-	ucb->id  = mid;
+	ucb->id  = id;
 	ucb->mcp = mcp;
 	ucb->irq = ucb1x00_detect_irq(ucb);
 	if (ucb->irq == NO_IRQ) {
-		printk(KERN_ERR "%s: IRQ probe failed\n", mid->name);
+		printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
 		ret = -ENODEV;
 		goto err_free;
 	}
 
 	ucb->gpio.base = -1;
-	if (pdata && (pdata->gpio_base >= 0)) {
+	if (mcp->gpio_base != 0) {
 		ucb->gpio.label = dev_name(&ucb->dev);
-		ucb->gpio.base = pdata->gpio_base;
+		ucb->gpio.base = mcp->gpio_base;
 		ucb->gpio.ngpio = 10;
 		ucb->gpio.set = ucb1x00_gpio_set;
 		ucb->gpio.get = ucb1x00_gpio_get;
@@ -605,10 +586,10 @@
 		dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
 
 	ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
-			  mid->name, ucb);
+			  "UCB1x00", ucb);
 	if (ret) {
-		printk(KERN_ERR "%s: unable to grab irq%d: %d\n",
-			mid->name, ucb->irq, ret);
+		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
+			ucb->irq, ret);
 		goto err_gpio;
 	}
 
@@ -712,6 +693,7 @@
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct ucb1x00_dev *dev;
 
+	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
 	mutex_lock(&ucb1x00_mutex);
 	list_for_each_entry(dev, &ucb->devs, dev_node) {
@@ -730,7 +712,6 @@
 	.remove		= ucb1x00_remove,
 	.suspend	= ucb1x00_suspend,
 	.resume		= ucb1x00_resume,
-	.id_table	= ucb1x00_id,
 };
 
 static int __init ucb1x00_init(void)
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 40ec3c1..63a3cbd 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -47,7 +47,6 @@
 	u16			x_res;
 	u16			y_res;
 
-	unsigned int		restart:1;
 	unsigned int		adcsync:1;
 };
 
@@ -207,15 +206,17 @@
 {
 	struct ucb1x00_ts *ts = _ts;
 	DECLARE_WAITQUEUE(wait, current);
+	bool frozen, ignore = false;
 	int valid = 0;
 
 	set_freezable();
 	add_wait_queue(&ts->irq_wait, &wait);
-	while (!kthread_should_stop()) {
+	while (!kthread_freezable_should_stop(&frozen)) {
 		unsigned int x, y, p;
 		signed long timeout;
 
-		ts->restart = 0;
+		if (frozen)
+			ignore = true;
 
 		ucb1x00_adc_enable(ts->ucb);
 
@@ -258,7 +259,7 @@
 			 * space.  We therefore leave it to user space
 			 * to do any filtering they please.
 			 */
-			if (!ts->restart) {
+			if (!ignore) {
 				ucb1x00_ts_evt_add(ts, p, x, y);
 				valid = 1;
 			}
@@ -267,8 +268,6 @@
 			timeout = HZ / 100;
 		}
 
-		try_to_freeze();
-
 		schedule_timeout(timeout);
 	}
 
@@ -340,26 +339,6 @@
 	ucb1x00_disable(ts->ucb);
 }
 
-#ifdef CONFIG_PM
-static int ucb1x00_ts_resume(struct ucb1x00_dev *dev)
-{
-	struct ucb1x00_ts *ts = dev->priv;
-
-	if (ts->rtask != NULL) {
-		/*
-		 * Restart the TS thread to ensure the
-		 * TS interrupt mode is set up again
-		 * after sleep.
-		 */
-		ts->restart = 1;
-		wake_up(&ts->irq_wait);
-	}
-	return 0;
-}
-#else
-#define ucb1x00_ts_resume NULL
-#endif
-
 
 /*
  * Initialisation.
@@ -382,7 +361,7 @@
 	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
 
 	idev->name       = "Touchscreen panel";
-	idev->id.product = ts->ucb->id->driver_data;
+	idev->id.product = ts->ucb->id;
 	idev->open       = ucb1x00_ts_open;
 	idev->close      = ucb1x00_ts_close;
 
@@ -425,7 +404,6 @@
 static struct ucb1x00_driver ucb1x00_ts_driver = {
 	.add		= ucb1x00_ts_add,
 	.remove		= ucb1x00_ts_remove,
-	.resume		= ucb1x00_ts_resume,
 };
 
 static int __init ucb1x00_ts_init(void)
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
index 752493f..65d1f05 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -972,11 +972,11 @@
 	}
 #endif
 
-	spin_unlock_irqrestore(&trans->shrd->lock, flags);
-
 	/* saved interrupt in inta variable now we can reset trans_pcie->inta */
 	trans_pcie->inta = 0;
 
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
 	/* Now service all interrupt bits discovered above. */
 	if (inta & CSR_INT_BIT_HW_ERR) {
 		IWL_ERR(trans, "Hardware error detected.  Restarting.\n");
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index fa67905..698b905 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -68,7 +68,7 @@
 
 #define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
 #define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
-#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
+#define TX_MAX_TARGET min_t(int, NET_TX_RING_SIZE, 256)
 
 struct netfront_stats {
 	u64			rx_packets;
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 5986690..27f2fe3 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -205,7 +205,8 @@
 
 	dev_set_drvdata(&dev->dev, NULL);
 
-	for (; next = s->next, s; s = next) {
+	for (; s; s = next) {
+		next = s->next;
 		soc_pcmcia_remove_one(&s->soc);
 		kfree(s);
 	}
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 569bdb3..8fe15cf 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -510,10 +510,12 @@
 
 static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 {
-	static struct dentry *device_root;
+	struct dentry *device_root;
 
 	device_root = debugfs_create_dir(dev_name(pctldev->dev),
 					 debugfs_root);
+	pctldev->device_root = device_root;
+
 	if (IS_ERR(device_root) || !device_root) {
 		pr_warn("failed to create debugfs directory for %s\n",
 			dev_name(pctldev->dev));
@@ -529,6 +531,11 @@
 	pinconf_init_device_debugfs(device_root, pctldev);
 }
 
+static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
+{
+	debugfs_remove_recursive(pctldev->device_root);
+}
+
 static void pinctrl_init_debugfs(void)
 {
 	debugfs_root = debugfs_create_dir("pinctrl", NULL);
@@ -553,6 +560,10 @@
 {
 }
 
+static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
+{
+}
+
 #endif
 
 /**
@@ -572,26 +583,6 @@
 	if (pctldesc->name == NULL)
 		return NULL;
 
-	/* If we're implementing pinmuxing, check the ops for sanity */
-	if (pctldesc->pmxops) {
-		ret = pinmux_check_ops(pctldesc->pmxops);
-		if (ret) {
-			pr_err("%s pinmux ops lacks necessary functions\n",
-			       pctldesc->name);
-			return NULL;
-		}
-	}
-
-	/* If we're implementing pinconfig, check the ops for sanity */
-	if (pctldesc->confops) {
-		ret = pinconf_check_ops(pctldesc->confops);
-		if (ret) {
-			pr_err("%s pin config ops lacks necessary functions\n",
-			       pctldesc->name);
-			return NULL;
-		}
-	}
-
 	pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL);
 	if (pctldev == NULL)
 		return NULL;
@@ -606,6 +597,26 @@
 	mutex_init(&pctldev->gpio_ranges_lock);
 	pctldev->dev = dev;
 
+	/* If we're implementing pinmuxing, check the ops for sanity */
+	if (pctldesc->pmxops) {
+		ret = pinmux_check_ops(pctldev);
+		if (ret) {
+			pr_err("%s pinmux ops lacks necessary functions\n",
+			       pctldesc->name);
+			goto out_err;
+		}
+	}
+
+	/* If we're implementing pinconfig, check the ops for sanity */
+	if (pctldesc->confops) {
+		ret = pinconf_check_ops(pctldev);
+		if (ret) {
+			pr_err("%s pin config ops lacks necessary functions\n",
+			       pctldesc->name);
+			goto out_err;
+		}
+	}
+
 	/* Register all the pins */
 	pr_debug("try to register %d pins on %s...\n",
 		 pctldesc->npins, pctldesc->name);
@@ -641,6 +652,7 @@
 	if (pctldev == NULL)
 		return;
 
+	pinctrl_remove_device_debugfs(pctldev);
 	pinmux_unhog_maps(pctldev);
 	/* TODO: check that no pinmuxes are still active? */
 	mutex_lock(&pinctrldev_list_mutex);
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 177a331..cfa86da 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -41,6 +41,9 @@
 	struct device *dev;
 	struct module *owner;
 	void *driver_data;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *device_root;
+#endif
 #ifdef CONFIG_PINMUX
 	struct mutex pinmux_hogs_lock;
 	struct list_head pinmux_hogs;
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index 1259872..9fb7545 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -205,8 +205,10 @@
 }
 EXPORT_SYMBOL(pin_config_group_set);
 
-int pinconf_check_ops(const struct pinconf_ops *ops)
+int pinconf_check_ops(struct pinctrl_dev *pctldev)
 {
+	const struct pinconf_ops *ops = pctldev->desc->confops;
+
 	/* We must be able to read out pin status */
 	if (!ops->pin_config_get && !ops->pin_config_group_get)
 		return -EINVAL;
@@ -236,7 +238,7 @@
 	seq_puts(s, "Format: pin (name): pinmux setting array\n");
 
 	/* The pin number can be retrived from the pin controller descriptor */
-	for (i = 0; pin < pctldev->desc->npins; i++) {
+	for (i = 0; i < pctldev->desc->npins; i++) {
 		struct pin_desc *desc;
 
 		pin = pctldev->desc->pins[i].number;
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
index e7dc616..006b77f 100644
--- a/drivers/pinctrl/pinconf.h
+++ b/drivers/pinctrl/pinconf.h
@@ -13,7 +13,7 @@
 
 #ifdef CONFIG_PINCONF
 
-int pinconf_check_ops(const struct pinconf_ops *ops);
+int pinconf_check_ops(struct pinctrl_dev *pctldev);
 void pinconf_init_device_debugfs(struct dentry *devroot,
 				 struct pinctrl_dev *pctldev);
 int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
@@ -23,7 +23,7 @@
 
 #else
 
-static inline int pinconf_check_ops(const struct pinconf_ops *ops)
+static inline int pinconf_check_ops(struct pinctrl_dev *pctldev)
 {
 	return 0;
 }
diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index a76a348..7c3193f 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -53,11 +53,6 @@
  * @dev: the device using this pinmux
  * @usecount: the number of active users of this mux setting, used to keep
  *	track of nested use cases
- * @pins: an array of discrete physical pins used in this mapping, taken
- *	from the global pin enumeration space (copied from pinmux map)
- * @num_pins: the number of pins in this mapping array, i.e. the number of
- *	elements in .pins so we can iterate over that array (copied from
- *	pinmux map)
  * @pctldev: pin control device handling this pinmux
  * @func_selector: the function selector for the pinmux device handling
  *	this pinmux
@@ -152,8 +147,7 @@
 		status = 0;
 
 	if (status)
-		dev_err(pctldev->dev, "->request on device %s failed "
-		       "for pin %d\n",
+		dev_err(pctldev->dev, "->request on device %s failed for pin %d\n",
 		       pctldev->desc->name, pin);
 out_free_pin:
 	if (status) {
@@ -355,21 +349,20 @@
 	/* First sanity check the new mapping */
 	for (i = 0; i < num_maps; i++) {
 		if (!maps[i].name) {
-			pr_err("failed to register map %d: "
-			       "no map name given\n", i);
+			pr_err("failed to register map %d: no map name given\n",
+					i);
 			return -EINVAL;
 		}
 
 		if (!maps[i].ctrl_dev && !maps[i].ctrl_dev_name) {
-			pr_err("failed to register map %s (%d): "
-			       "no pin control device given\n",
+			pr_err("failed to register map %s (%d): no pin control device given\n",
 			       maps[i].name, i);
 			return -EINVAL;
 		}
 
 		if (!maps[i].function) {
-			pr_err("failed to register map %s (%d): "
-			       "no function ID given\n", maps[i].name, i);
+			pr_err("failed to register map %s (%d): no function ID given\n",
+					maps[i].name, i);
 			return -EINVAL;
 		}
 
@@ -411,7 +404,7 @@
 }
 
 /**
- * acquire_pins() - acquire all the pins for a certain funcion on a pinmux
+ * acquire_pins() - acquire all the pins for a certain function on a pinmux
  * @pctldev: the device to take the pins on
  * @func_selector: the function selector to acquire the pins for
  * @group_selector: the group selector containing the pins to acquire
@@ -442,8 +435,7 @@
 		ret = pin_request(pctldev, pins[i], func, NULL);
 		if (ret) {
 			dev_err(pctldev->dev,
-				"could not get pin %d for function %s "
-				"on device %s - conflicting mux mappings?\n",
+				"could not get pin %d for function %s on device %s - conflicting mux mappings?\n",
 				pins[i], func ? : "(undefined)",
 				pinctrl_dev_get_name(pctldev));
 			/* On error release all taken pins */
@@ -458,7 +450,7 @@
 
 /**
  * release_pins() - release pins taken by earlier acquirement
- * @pctldev: the device to free the pinx on
+ * @pctldev: the device to free the pins on
  * @group_selector: the group selector containing the pins to free
  */
 static void release_pins(struct pinctrl_dev *pctldev,
@@ -473,8 +465,7 @@
 	ret = pctlops->get_group_pins(pctldev, group_selector,
 				      &pins, &num_pins);
 	if (ret) {
-		dev_err(pctldev->dev, "could not get pins to release for "
-			"group selector %d\n",
+		dev_err(pctldev->dev, "could not get pins to release for group selector %d\n",
 			group_selector);
 		return;
 	}
@@ -526,8 +517,7 @@
 		ret = pinctrl_get_group_selector(pctldev, groups[0]);
 		if (ret < 0) {
 			dev_err(pctldev->dev,
-				"function %s wants group %s but the pin "
-				"controller does not seem to have that group\n",
+				"function %s wants group %s but the pin controller does not seem to have that group\n",
 				pmxops->get_function_name(pctldev, func_selector),
 				groups[0]);
 			return ret;
@@ -535,8 +525,7 @@
 
 		if (num_groups > 1)
 			dev_dbg(pctldev->dev,
-				"function %s support more than one group, "
-				"default-selecting first group %s (%d)\n",
+				"function %s support more than one group, default-selecting first group %s (%d)\n",
 				pmxops->get_function_name(pctldev, func_selector),
 				groups[0],
 				ret);
@@ -628,10 +617,8 @@
 
 	if (pmx->pctldev && pmx->pctldev != pctldev) {
 		dev_err(pctldev->dev,
-			"different pin control devices given for device %s, "
-			"function %s\n",
-			devname,
-			map->function);
+			"different pin control devices given for device %s, function %s\n",
+			devname, map->function);
 		return -EINVAL;
 	}
 	pmx->dev = dev;
@@ -695,7 +682,6 @@
  */
 struct pinmux *pinmux_get(struct device *dev, const char *name)
 {
-
 	struct pinmux_map const *map = NULL;
 	struct pinctrl_dev *pctldev = NULL;
 	const char *devname = NULL;
@@ -745,8 +731,7 @@
 			else if (map->ctrl_dev_name)
 				devname = map->ctrl_dev_name;
 
-			pr_warning("could not find a pinctrl device for pinmux "
-				   "function %s, fishy, they shall all have one\n",
+			pr_warning("could not find a pinctrl device for pinmux function %s, fishy, they shall all have one\n",
 				   map->function);
 			pr_warning("given pinctrl device name: %s",
 				   devname ? devname : "UNDEFINED");
@@ -904,8 +889,11 @@
 }
 EXPORT_SYMBOL_GPL(pinmux_disable);
 
-int pinmux_check_ops(const struct pinmux_ops *ops)
+int pinmux_check_ops(struct pinctrl_dev *pctldev)
 {
+	const struct pinmux_ops *ops = pctldev->desc->pmxops;
+	unsigned selector = 0;
+
 	/* Check that we implement required operations */
 	if (!ops->list_functions ||
 	    !ops->get_function_name ||
@@ -914,6 +902,18 @@
 	    !ops->disable)
 		return -EINVAL;
 
+	/* Check that all functions registered have names */
+	while (ops->list_functions(pctldev, selector) >= 0) {
+		const char *fname = ops->get_function_name(pctldev,
+							   selector);
+		if (!fname) {
+			pr_err("pinmux ops has no name for function%u\n",
+				selector);
+			return -EINVAL;
+		}
+		selector++;
+	}
+
 	return 0;
 }
 
@@ -932,8 +932,8 @@
 		 * without any problems, so then we can hog pinmuxes for
 		 * all devices that just want a static pin mux at this point.
 		 */
-		dev_err(pctldev->dev, "map %s wants to hog a non-system "
-			"pinmux, this is not going to work\n", map->name);
+		dev_err(pctldev->dev, "map %s wants to hog a non-system pinmux, this is not going to work\n",
+				map->name);
 		return -EINVAL;
 	}
 
@@ -993,9 +993,12 @@
 	for (i = 0; i < pinmux_maps_num; i++) {
 		struct pinmux_map const *map = &pinmux_maps[i];
 
-		if (((map->ctrl_dev == dev) ||
-		     !strcmp(map->ctrl_dev_name, devname)) &&
-		    map->hog_on_boot) {
+		if (!map->hog_on_boot)
+			continue;
+
+		if ((map->ctrl_dev == dev) ||
+			(map->ctrl_dev_name &&
+				!strcmp(map->ctrl_dev_name, devname))) {
 			/* OK time to hog! */
 			ret = pinmux_hog_map(pctldev, map);
 			if (ret)
@@ -1122,13 +1125,15 @@
 
 		seq_printf(s, "device: %s function: %s (%u),",
 			   pinctrl_dev_get_name(pmx->pctldev),
-			   pmxops->get_function_name(pctldev, pmx->func_selector),
+			   pmxops->get_function_name(pctldev,
+				   pmx->func_selector),
 			   pmx->func_selector);
 
 		seq_printf(s, " groups: [");
 		list_for_each_entry(grp, &pmx->groups, node) {
 			seq_printf(s, " %s (%u)",
-				   pctlops->get_group_name(pctldev, grp->group_selector),
+				   pctlops->get_group_name(pctldev,
+					   grp->group_selector),
 				   grp->group_selector);
 		}
 		seq_printf(s, " ]");
diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h
index 844500b..97f5222 100644
--- a/drivers/pinctrl/pinmux.h
+++ b/drivers/pinctrl/pinmux.h
@@ -12,7 +12,7 @@
  */
 #ifdef CONFIG_PINMUX
 
-int pinmux_check_ops(const struct pinmux_ops *ops);
+int pinmux_check_ops(struct pinctrl_dev *pctldev);
 void pinmux_init_device_debugfs(struct dentry *devroot,
 				struct pinctrl_dev *pctldev);
 void pinmux_init_debugfs(struct dentry *subsys_root);
@@ -21,7 +21,7 @@
 
 #else
 
-static inline int pinmux_check_ops(const struct pinmux_ops *ops)
+static inline int pinmux_check_ops(struct pinctrl_dev *pctldev)
 {
 	return 0;
 }
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index f1651eb..679734d 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -35,7 +35,7 @@
 	if (constraints->min_uV != constraints->max_uV)
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
 	/* Only one voltage?  Then make sure it's set. */
-	if (constraints->min_uV == constraints->max_uV)
+	if (min_uV && max_uV && constraints->min_uV == constraints->max_uV)
 		constraints->apply_uV = true;
 
 	uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e19a403..3a125b8 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -774,7 +774,7 @@
 
 config RTC_DRV_SA1100
 	tristate "SA11x0/PXA2xx"
-	depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
+	depends on ARCH_SA1100 || ARCH_PXA
 	help
 	  If you say Y here you will get access to the real time clock
 	  built into your SA11x0 or PXA2xx CPU.
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 4595d3e..cb9a585 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -27,42 +27,34 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/string.h>
 #include <linux/pm.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/io.h>
+#include <linux/bitops.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#ifdef CONFIG_ARCH_PXA
+#include <mach/regs-rtc.h>
+#endif
+
 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
-#define RTC_FREQ		1024
 
-#define RCNR		0x00	/* RTC Count Register */
-#define RTAR		0x04	/* RTC Alarm Register */
-#define RTSR		0x08	/* RTC Status Register */
-#define RTTR		0x0c	/* RTC Timer Trim Register */
+static const unsigned long RTC_FREQ = 1024;
+static struct rtc_time rtc_alarm;
+static DEFINE_SPINLOCK(sa1100_rtc_lock);
 
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+static inline int rtc_periodic_alarm(struct rtc_time *tm)
+{
+	return  (tm->tm_year == -1) ||
+		((unsigned)tm->tm_mon >= 12) ||
+		((unsigned)(tm->tm_mday - 1) >= 31) ||
+		((unsigned)tm->tm_hour > 23) ||
+		((unsigned)tm->tm_min > 59) ||
+		((unsigned)tm->tm_sec > 59);
+}
 
-#define rtc_readl(sa1100_rtc, reg)	\
-	readl_relaxed((sa1100_rtc)->base + (reg))
-#define rtc_writel(sa1100_rtc, reg, value)	\
-	writel_relaxed((value), (sa1100_rtc)->base + (reg))
-
-struct sa1100_rtc {
-	struct resource		*ress;
-	void __iomem		*base;
-	struct clk		*clk;
-	int			irq_1Hz;
-	int			irq_Alrm;
-	struct rtc_device	*rtc;
-	spinlock_t		lock;		/* Protects this structure */
-};
 /*
  * Calculate the next alarm time given the requested alarm time mask
  * and the current time.
@@ -90,26 +82,46 @@
 	}
 }
 
+static int rtc_update_alarm(struct rtc_time *alrm)
+{
+	struct rtc_time alarm_tm, now_tm;
+	unsigned long now, time;
+	int ret;
+
+	do {
+		now = RCNR;
+		rtc_time_to_tm(now, &now_tm);
+		rtc_next_alarm_time(&alarm_tm, &now_tm, alrm);
+		ret = rtc_tm_to_time(&alarm_tm, &time);
+		if (ret != 0)
+			break;
+
+		RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
+		RTAR = time;
+	} while (now != RCNR);
+
+	return ret;
+}
+
 static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 {
 	struct platform_device *pdev = to_platform_device(dev_id);
-	struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
 	unsigned int rtsr;
 	unsigned long events = 0;
 
-	spin_lock(&sa1100_rtc->lock);
+	spin_lock(&sa1100_rtc_lock);
 
+	rtsr = RTSR;
 	/* clear interrupt sources */
-	rtsr = rtc_readl(sa1100_rtc, RTSR);
-	rtc_writel(sa1100_rtc, RTSR, 0);
-
+	RTSR = 0;
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_probe(). */
 	if (rtsr & (RTSR_ALE | RTSR_HZE)) {
 		/* This is the original code, before there was the if test
 		 * above. This code does not clear interrupts that were not
 		 * enabled. */
-		rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2));
+		RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
 	} else {
 		/* For some reason, it is possible to enter this routine
 		 * without interruptions enabled, it has been tested with
@@ -118,13 +130,13 @@
 		 * This situation leads to an infinite "loop" of interrupt
 		 * routine calling and as a result the processor seems to
 		 * lock on its first call to open(). */
-		rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
+		RTSR = RTSR_AL | RTSR_HZ;
 	}
 
 	/* clear alarm interrupt if it has occurred */
 	if (rtsr & RTSR_AL)
 		rtsr &= ~RTSR_ALE;
-	rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE));
+	RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
 
 	/* update irq data & counter */
 	if (rtsr & RTSR_AL)
@@ -132,100 +144,89 @@
 	if (rtsr & RTSR_HZ)
 		events |= RTC_UF | RTC_IRQF;
 
-	rtc_update_irq(sa1100_rtc->rtc, 1, events);
+	rtc_update_irq(rtc, 1, events);
 
-	spin_unlock(&sa1100_rtc->lock);
+	if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm))
+		rtc_update_alarm(&rtc_alarm);
+
+	spin_unlock(&sa1100_rtc_lock);
 
 	return IRQ_HANDLED;
 }
 
 static int sa1100_rtc_open(struct device *dev)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
 	int ret;
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct rtc_device *rtc = platform_get_drvdata(plat_dev);
 
-	ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt,
-				IRQF_DISABLED, "rtc 1Hz", dev);
+	ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
+		"rtc 1Hz", dev);
 	if (ret) {
-		dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz);
+		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
 		goto fail_ui;
 	}
-	ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt,
-				IRQF_DISABLED, "rtc Alrm", dev);
+	ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
+		"rtc Alrm", dev);
 	if (ret) {
-		dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm);
+		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
 		goto fail_ai;
 	}
-	sa1100_rtc->rtc->max_user_freq = RTC_FREQ;
-	rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ);
+	rtc->max_user_freq = RTC_FREQ;
+	rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
 
 	return 0;
 
  fail_ai:
-	free_irq(sa1100_rtc->irq_1Hz, dev);
+	free_irq(IRQ_RTC1Hz, dev);
  fail_ui:
 	return ret;
 }
 
 static void sa1100_rtc_release(struct device *dev)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+	spin_lock_irq(&sa1100_rtc_lock);
+	RTSR = 0;
+	spin_unlock_irq(&sa1100_rtc_lock);
 
-	spin_lock_irq(&sa1100_rtc->lock);
-	rtc_writel(sa1100_rtc, RTSR, 0);
-	spin_unlock_irq(&sa1100_rtc->lock);
-
-	free_irq(sa1100_rtc->irq_Alrm, dev);
-	free_irq(sa1100_rtc->irq_1Hz, dev);
+	free_irq(IRQ_RTCAlrm, dev);
+	free_irq(IRQ_RTC1Hz, dev);
 }
 
 static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-	unsigned int rtsr;
-
-	spin_lock_irq(&sa1100_rtc->lock);
-
-	rtsr = rtc_readl(sa1100_rtc, RTSR);
+	spin_lock_irq(&sa1100_rtc_lock);
 	if (enabled)
-		rtsr |= RTSR_ALE;
+		RTSR |= RTSR_ALE;
 	else
-		rtsr &= ~RTSR_ALE;
-	rtc_writel(sa1100_rtc, RTSR, rtsr);
-
-	spin_unlock_irq(&sa1100_rtc->lock);
+		RTSR &= ~RTSR_ALE;
+	spin_unlock_irq(&sa1100_rtc_lock);
 	return 0;
 }
 
 static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
-	rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm);
+	rtc_time_to_tm(RCNR, tm);
 	return 0;
 }
 
 static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
 	unsigned long time;
 	int ret;
 
 	ret = rtc_tm_to_time(tm, &time);
 	if (ret == 0)
-		rtc_writel(sa1100_rtc, RCNR, time);
+		RCNR = time;
 	return ret;
 }
 
 static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-	unsigned long time;
-	unsigned int rtsr;
+	u32	rtsr;
 
-	time = rtc_readl(sa1100_rtc, RCNR);
-	rtc_time_to_tm(time, &alrm->time);
-	rtsr = rtc_readl(sa1100_rtc, RTSR);
+	memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
+	rtsr = RTSR;
 	alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
 	alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
 	return 0;
@@ -233,39 +234,26 @@
 
 static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-	struct rtc_time now_tm, alarm_tm;
-	unsigned long time, alarm;
-	unsigned int rtsr;
+	int ret;
 
-	spin_lock_irq(&sa1100_rtc->lock);
+	spin_lock_irq(&sa1100_rtc_lock);
+	ret = rtc_update_alarm(&alrm->time);
+	if (ret == 0) {
+		if (alrm->enabled)
+			RTSR |= RTSR_ALE;
+		else
+			RTSR &= ~RTSR_ALE;
+	}
+	spin_unlock_irq(&sa1100_rtc_lock);
 
-	time = rtc_readl(sa1100_rtc, RCNR);
-	rtc_time_to_tm(time, &now_tm);
-	rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
-	rtc_tm_to_time(&alarm_tm, &alarm);
-	rtc_writel(sa1100_rtc, RTAR, alarm);
-
-	rtsr = rtc_readl(sa1100_rtc, RTSR);
-	if (alrm->enabled)
-		rtsr |= RTSR_ALE;
-	else
-		rtsr &= ~RTSR_ALE;
-	rtc_writel(sa1100_rtc, RTSR, rtsr);
-
-	spin_unlock_irq(&sa1100_rtc->lock);
-
-	return 0;
+	return ret;
 }
 
 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+	seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
+	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
 
-	seq_printf(seq, "trim/divider\t\t: 0x%08x\n",
-			rtc_readl(sa1100_rtc, RTTR));
-	seq_printf(seq, "RTSR\t\t\t: 0x%08x\n",
-			rtc_readl(sa1100_rtc, RTSR));
 	return 0;
 }
 
@@ -282,51 +270,7 @@
 
 static int sa1100_rtc_probe(struct platform_device *pdev)
 {
-	struct sa1100_rtc *sa1100_rtc;
-	unsigned int rttr;
-	int ret;
-
-	sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
-	if (!sa1100_rtc)
-		return -ENOMEM;
-
-	spin_lock_init(&sa1100_rtc->lock);
-	platform_set_drvdata(pdev, sa1100_rtc);
-
-	ret = -ENXIO;
-	sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!sa1100_rtc->ress) {
-		dev_err(&pdev->dev, "No I/O memory resource defined\n");
-		goto err_ress;
-	}
-
-	sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0);
-	if (sa1100_rtc->irq_1Hz < 0) {
-		dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
-		goto err_ress;
-	}
-	sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1);
-	if (sa1100_rtc->irq_Alrm < 0) {
-		dev_err(&pdev->dev, "No alarm IRQ resource defined\n");
-		goto err_ress;
-	}
-
-	ret = -ENOMEM;
-	sa1100_rtc->base = ioremap(sa1100_rtc->ress->start,
-				resource_size(sa1100_rtc->ress));
-	if (!sa1100_rtc->base) {
-		dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n");
-		goto err_map;
-	}
-
-	sa1100_rtc->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(sa1100_rtc->clk)) {
-		dev_err(&pdev->dev, "failed to find rtc clock source\n");
-		ret = PTR_ERR(sa1100_rtc->clk);
-		goto err_clk;
-	}
-	clk_prepare(sa1100_rtc->clk);
-	clk_enable(sa1100_rtc->clk);
+	struct rtc_device *rtc;
 
 	/*
 	 * According to the manual we should be able to let RTTR be zero
@@ -335,24 +279,24 @@
 	 * If the clock divider is uninitialized then reset it to the
 	 * default value to get the 1Hz clock.
 	 */
-	if (rtc_readl(sa1100_rtc, RTTR) == 0) {
-		rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
-		rtc_writel(sa1100_rtc, RTTR, rttr);
-		dev_warn(&pdev->dev, "warning: initializing default clock"
-			 " divider/trim value\n");
+	if (RTTR == 0) {
+		RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+		dev_warn(&pdev->dev, "warning: "
+			"initializing default clock divider/trim value\n");
 		/* The current RTC value probably doesn't make sense either */
-		rtc_writel(sa1100_rtc, RCNR, 0);
+		RCNR = 0;
 	}
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
-						&sa1100_rtc_ops, THIS_MODULE);
-	if (IS_ERR(sa1100_rtc->rtc)) {
-		dev_err(&pdev->dev, "Failed to register RTC device -> %d\n",
-			ret);
-		goto err_rtc_reg;
-	}
+	rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
+		THIS_MODULE);
+
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(pdev, rtc);
+
 	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
 	 * See also the comments in sa1100_rtc_interrupt().
 	 *
@@ -375,46 +319,33 @@
 	 *
 	 * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
 	 * the corresponding bits in RTSR. */
-	rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
+	RTSR = RTSR_AL | RTSR_HZ;
 
 	return 0;
-
-err_rtc_reg:
-err_clk:
-	iounmap(sa1100_rtc->base);
-err_ress:
-err_map:
-	kfree(sa1100_rtc);
-	return ret;
 }
 
 static int sa1100_rtc_remove(struct platform_device *pdev)
 {
-	struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
 
-	rtc_device_unregister(sa1100_rtc->rtc);
-	clk_disable(sa1100_rtc->clk);
-	clk_unprepare(sa1100_rtc->clk);
-	iounmap(sa1100_rtc->base);
+	if (rtc)
+		rtc_device_unregister(rtc);
+
 	return 0;
 }
 
 #ifdef CONFIG_PM
 static int sa1100_rtc_suspend(struct device *dev)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
 	if (device_may_wakeup(dev))
-		enable_irq_wake(sa1100_rtc->irq_Alrm);
+		enable_irq_wake(IRQ_RTCAlrm);
 	return 0;
 }
 
 static int sa1100_rtc_resume(struct device *dev)
 {
-	struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
 	if (device_may_wakeup(dev))
-		disable_irq_wake(sa1100_rtc->irq_Alrm);
+		disable_irq_wake(IRQ_RTCAlrm);
 	return 0;
 }
 
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index eef27a1..110137e 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -3261,6 +3261,12 @@
 			device->path_data.tbvpm |= eventlpm;
 			dasd_schedule_device_bh(device);
 		}
+		if (path_event[chp] & PE_PATHGROUP_ESTABLISHED) {
+			DBF_DEV_EVENT(DBF_WARNING, device, "%s",
+				      "Pathgroup re-established\n");
+			if (device->discipline->kick_validate)
+				device->discipline->kick_validate(device);
+		}
 	}
 	dasd_put_device(device);
 }
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 553b3c5..b3beed5 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -189,14 +189,12 @@
 	unsigned long flags;
 	struct alias_server *server, *newserver;
 	struct alias_lcu *lcu, *newlcu;
-	int is_lcu_known;
 	struct dasd_uid uid;
 
 	private = (struct dasd_eckd_private *) device->private;
 
 	device->discipline->get_uid(device, &uid);
 	spin_lock_irqsave(&aliastree.lock, flags);
-	is_lcu_known = 1;
 	server = _find_server(&uid);
 	if (!server) {
 		spin_unlock_irqrestore(&aliastree.lock, flags);
@@ -208,7 +206,6 @@
 		if (!server) {
 			list_add(&newserver->server, &aliastree.serverlist);
 			server = newserver;
-			is_lcu_known = 0;
 		} else {
 			/* someone was faster */
 			_free_server(newserver);
@@ -226,12 +223,10 @@
 		if (!lcu) {
 			list_add(&newlcu->lcu, &server->lculist);
 			lcu = newlcu;
-			is_lcu_known = 0;
 		} else {
 			/* someone was faster */
 			_free_lcu(newlcu);
 		}
-		is_lcu_known = 0;
 	}
 	spin_lock(&lcu->lock);
 	list_add(&device->alias_list, &lcu->inactive_devices);
@@ -239,64 +234,7 @@
 	spin_unlock(&lcu->lock);
 	spin_unlock_irqrestore(&aliastree.lock, flags);
 
-	return is_lcu_known;
-}
-
-/*
- * The first device to be registered on an LCU will have to do
- * some additional setup steps to configure that LCU on the
- * storage server. All further devices should wait with their
- * initialization until the first device is done.
- * To synchronize this work, the first device will call
- * dasd_alias_lcu_setup_complete when it is done, and all
- * other devices will wait for it with dasd_alias_wait_for_lcu_setup.
- */
-void dasd_alias_lcu_setup_complete(struct dasd_device *device)
-{
-	unsigned long flags;
-	struct alias_server *server;
-	struct alias_lcu *lcu;
-	struct dasd_uid uid;
-
-	device->discipline->get_uid(device, &uid);
-	lcu = NULL;
-	spin_lock_irqsave(&aliastree.lock, flags);
-	server = _find_server(&uid);
-	if (server)
-		lcu = _find_lcu(server, &uid);
-	spin_unlock_irqrestore(&aliastree.lock, flags);
-	if (!lcu) {
-		DBF_EVENT_DEVID(DBF_ERR, device->cdev,
-				"could not find lcu for %04x %02x",
-				uid.ssid, uid.real_unit_addr);
-		WARN_ON(1);
-		return;
-	}
-	complete_all(&lcu->lcu_setup);
-}
-
-void dasd_alias_wait_for_lcu_setup(struct dasd_device *device)
-{
-	unsigned long flags;
-	struct alias_server *server;
-	struct alias_lcu *lcu;
-	struct dasd_uid uid;
-
-	device->discipline->get_uid(device, &uid);
-	lcu = NULL;
-	spin_lock_irqsave(&aliastree.lock, flags);
-	server = _find_server(&uid);
-	if (server)
-		lcu = _find_lcu(server, &uid);
-	spin_unlock_irqrestore(&aliastree.lock, flags);
-	if (!lcu) {
-		DBF_EVENT_DEVID(DBF_ERR, device->cdev,
-				"could not find lcu for %04x %02x",
-				uid.ssid, uid.real_unit_addr);
-		WARN_ON(1);
-		return;
-	}
-	wait_for_completion(&lcu->lcu_setup);
+	return 0;
 }
 
 /*
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index bbcd5e9..70880be 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1534,6 +1534,10 @@
 	struct dasd_eckd_private *private;
 	int enable_pav;
 
+	private = (struct dasd_eckd_private *) device->private;
+	if (private->uid.type == UA_BASE_PAV_ALIAS ||
+	    private->uid.type == UA_HYPER_PAV_ALIAS)
+		return;
 	if (dasd_nopav || MACHINE_IS_VM)
 		enable_pav = 0;
 	else
@@ -1542,11 +1546,28 @@
 
 	/* may be requested feature is not available on server,
 	 * therefore just report error and go ahead */
-	private = (struct dasd_eckd_private *) device->private;
 	DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x "
 			"returned rc=%d", private->uid.ssid, rc);
 }
 
+/*
+ * worker to do a validate server in case of a lost pathgroup
+ */
+static void dasd_eckd_do_validate_server(struct work_struct *work)
+{
+	struct dasd_device *device = container_of(work, struct dasd_device,
+						  kick_validate);
+	dasd_eckd_validate_server(device);
+	dasd_put_device(device);
+}
+
+static void dasd_eckd_kick_validate_server(struct dasd_device *device)
+{
+	dasd_get_device(device);
+	/* queue call to do_validate_server to the kernel event daemon. */
+	schedule_work(&device->kick_validate);
+}
+
 static u32 get_fcx_max_data(struct dasd_device *device)
 {
 #if defined(CONFIG_64BIT)
@@ -1588,10 +1609,13 @@
 	struct dasd_eckd_private *private;
 	struct dasd_block *block;
 	struct dasd_uid temp_uid;
-	int is_known, rc, i;
+	int rc, i;
 	int readonly;
 	unsigned long value;
 
+	/* setup work queue for validate server*/
+	INIT_WORK(&device->kick_validate, dasd_eckd_do_validate_server);
+
 	if (!ccw_device_is_pathgroup(device->cdev)) {
 		dev_warn(&device->cdev->dev,
 			 "A channel path group could not be established\n");
@@ -1651,22 +1675,12 @@
 		block->base = device;
 	}
 
-	/* register lcu with alias handling, enable PAV if this is a new lcu */
-	is_known = dasd_alias_make_device_known_to_lcu(device);
-	if (is_known < 0) {
-		rc = is_known;
+	/* register lcu with alias handling, enable PAV */
+	rc = dasd_alias_make_device_known_to_lcu(device);
+	if (rc)
 		goto out_err2;
-	}
-	/*
-	 * dasd_eckd_validate_server is done on the first device that
-	 * is found for an LCU. All later other devices have to wait
-	 * for it, so they will read the correct feature codes.
-	 */
-	if (!is_known) {
-		dasd_eckd_validate_server(device);
-		dasd_alias_lcu_setup_complete(device);
-	} else
-		dasd_alias_wait_for_lcu_setup(device);
+
+	dasd_eckd_validate_server(device);
 
 	/* device may report different configuration data after LCU setup */
 	rc = dasd_eckd_read_conf(device);
@@ -4098,7 +4112,7 @@
 {
 	struct dasd_eckd_private *private;
 	struct dasd_eckd_characteristics temp_rdc_data;
-	int is_known, rc;
+	int rc;
 	struct dasd_uid temp_uid;
 	unsigned long flags;
 
@@ -4121,14 +4135,10 @@
 		goto out_err;
 
 	/* register lcu with alias handling, enable PAV if this is a new lcu */
-	is_known = dasd_alias_make_device_known_to_lcu(device);
-	if (is_known < 0)
-		return is_known;
-	if (!is_known) {
-		dasd_eckd_validate_server(device);
-		dasd_alias_lcu_setup_complete(device);
-	} else
-		dasd_alias_wait_for_lcu_setup(device);
+	rc = dasd_alias_make_device_known_to_lcu(device);
+	if (rc)
+		return rc;
+	dasd_eckd_validate_server(device);
 
 	/* RE-Read Configuration Data */
 	rc = dasd_eckd_read_conf(device);
@@ -4270,6 +4280,7 @@
 	.restore = dasd_eckd_restore_device,
 	.reload = dasd_eckd_reload_device,
 	.get_uid = dasd_eckd_get_uid,
+	.kick_validate = dasd_eckd_kick_validate_server,
 };
 
 static int __init
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index afe8c33..33a6743 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -355,6 +355,7 @@
 	int (*reload) (struct dasd_device *);
 
 	int (*get_uid) (struct dasd_device *, struct dasd_uid *);
+	void (*kick_validate) (struct dasd_device *);
 };
 
 extern struct dasd_discipline *dasd_diag_discipline_pointer;
@@ -455,6 +456,7 @@
 	struct work_struct kick_work;
 	struct work_struct restore_device;
 	struct work_struct reload_device;
+	struct work_struct kick_validate;
 	struct timer_list timer;
 
 	debug_info_t *debug_area;
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index 4ceeace..70eb1f7 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -565,8 +565,7 @@
 	esp_chips[dev->id] = esp;
 	mb();
 	if (esp_chips[!dev->id] == NULL) {
-		err = request_irq(host->irq, mac_scsi_esp_intr, 0,
-		                  "Mac ESP", NULL);
+		err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL);
 		if (err < 0) {
 			esp_chips[dev->id] = NULL;
 			goto fail_free_priv;
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index ea2bde2..2bccfbe 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -339,9 +339,6 @@
 
 	printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
 
-	/* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
-	disable_irq(IRQ_MAC_SCSI);
-
 	/* get in phase */
 	NCR5380_write( TARGET_COMMAND_REG,
 		      PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
@@ -357,9 +354,6 @@
 	for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
 		barrier();
 
-	/* switch on SCSI IRQ again */
-	enable_irq(IRQ_MAC_SCSI);
-
 	printk(KERN_INFO " done\n" );
 }
 #endif
diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
index 70e006b..5443e25 100644
--- a/drivers/staging/media/go7007/go7007-usb.c
+++ b/drivers/staging/media/go7007/go7007-usb.c
@@ -1279,3 +1279,4 @@
 };
 
 module_usb_driver(go7007_usb_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250/8250.c
similarity index 100%
rename from drivers/tty/serial/8250.c
rename to drivers/tty/serial/8250/8250.c
diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250/8250.h
similarity index 100%
rename from drivers/tty/serial/8250.h
rename to drivers/tty/serial/8250/8250.h
diff --git a/drivers/tty/serial/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c
similarity index 100%
rename from drivers/tty/serial/8250_accent.c
rename to drivers/tty/serial/8250/8250_accent.c
diff --git a/drivers/tty/serial/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
similarity index 100%
rename from drivers/tty/serial/8250_acorn.c
rename to drivers/tty/serial/8250/8250_acorn.c
diff --git a/drivers/tty/serial/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c
similarity index 100%
rename from drivers/tty/serial/8250_boca.c
rename to drivers/tty/serial/8250/8250_boca.c
diff --git a/drivers/tty/serial/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
similarity index 100%
rename from drivers/tty/serial/8250_dw.c
rename to drivers/tty/serial/8250/8250_dw.c
diff --git a/drivers/tty/serial/8250_early.c b/drivers/tty/serial/8250/8250_early.c
similarity index 100%
rename from drivers/tty/serial/8250_early.c
rename to drivers/tty/serial/8250/8250_early.c
diff --git a/drivers/tty/serial/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c
similarity index 100%
rename from drivers/tty/serial/8250_exar_st16c554.c
rename to drivers/tty/serial/8250/8250_exar_st16c554.c
diff --git a/drivers/tty/serial/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c
similarity index 100%
rename from drivers/tty/serial/8250_fourport.c
rename to drivers/tty/serial/8250/8250_fourport.c
diff --git a/drivers/tty/serial/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
similarity index 100%
rename from drivers/tty/serial/8250_fsl.c
rename to drivers/tty/serial/8250/8250_fsl.c
diff --git a/drivers/tty/serial/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
similarity index 100%
rename from drivers/tty/serial/8250_gsc.c
rename to drivers/tty/serial/8250/8250_gsc.c
diff --git a/drivers/tty/serial/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
similarity index 100%
rename from drivers/tty/serial/8250_hp300.c
rename to drivers/tty/serial/8250/8250_hp300.c
diff --git a/drivers/tty/serial/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
similarity index 100%
rename from drivers/tty/serial/8250_hub6.c
rename to drivers/tty/serial/8250/8250_hub6.c
diff --git a/drivers/tty/serial/8250_mca.c b/drivers/tty/serial/8250/8250_mca.c
similarity index 100%
rename from drivers/tty/serial/8250_mca.c
rename to drivers/tty/serial/8250/8250_mca.c
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
similarity index 100%
rename from drivers/tty/serial/8250_pci.c
rename to drivers/tty/serial/8250/8250_pci.c
diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
similarity index 100%
rename from drivers/tty/serial/8250_pnp.c
rename to drivers/tty/serial/8250/8250_pnp.c
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
new file mode 100644
index 0000000..591f801
--- /dev/null
+++ b/drivers/tty/serial/8250/Kconfig
@@ -0,0 +1,280 @@
+#
+# The 8250/16550 serial drivers.  You shouldn't be in this list unless
+# you somehow have an implicit or explicit dependency on SERIAL_8250.
+#
+
+config SERIAL_8250
+	tristate "8250/16550 and compatible serial support"
+	select SERIAL_CORE
+	---help---
+	  This selects whether you want to include the driver for the standard
+	  serial ports.  The standard answer is Y.  People who might say N
+	  here are those that are setting up dedicated Ethernet WWW/FTP
+	  servers, or users that have one of the various bus mice instead of a
+	  serial mouse and don't intend to use their machine's standard serial
+	  port for anything.  (Note that the Cyclades and Stallion multi
+	  serial port drivers do not need this driver built in for them to
+	  work.)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called 8250.
+	  [WARNING: Do not compile this driver as a module if you are using
+	  non-standard serial ports, since the configuration information will
+	  be lost when the driver is unloaded.  This limitation may be lifted
+	  in the future.]
+
+	  BTW1: If you have a mouseman serial mouse which is not recognized by
+	  the X window system, try running gpm first.
+
+	  BTW2: If you intend to use a software modem (also called Winmodem)
+	  under Linux, forget it.  These modems are crippled and require
+	  proprietary drivers which are only available under Windows.
+
+	  Most people will say Y or M here, so that they can use serial mice,
+	  modems and similar devices connecting to the standard serial ports.
+
+config SERIAL_8250_CONSOLE
+	bool "Console on 8250/16550 and compatible serial port"
+	depends on SERIAL_8250=y
+	select SERIAL_CORE_CONSOLE
+	---help---
+	  If you say Y here, it will be possible to use a serial port as the
+	  system console (the system console is the device which receives all
+	  kernel messages and warnings and which allows logins in single user
+	  mode). This could be useful if some terminal or printer is connected
+	  to that serial port.
+
+	  Even if you say Y here, the currently visible virtual console
+	  (/dev/tty0) will still be used as the system console by default, but
+	  you can alter that using a kernel command line option such as
+	  "console=ttyS1". (Try "man bootparam" or see the documentation of
+	  your boot loader (grub or lilo or loadlin) about how to pass options
+	  to the kernel at boot time.)
+
+	  If you don't have a VGA card installed and you say Y here, the
+	  kernel will automatically use the first serial line, /dev/ttyS0, as
+	  system console.
+
+	  You can set that using a kernel command line option such as
+	  "console=uart8250,io,0x3f8,9600n8"
+	  "console=uart8250,mmio,0xff5e0000,115200n8".
+	  and it will switch to normal serial console when the corresponding
+	  port is ready.
+	  "earlycon=uart8250,io,0x3f8,9600n8"
+	  "earlycon=uart8250,mmio,0xff5e0000,115200n8".
+	  it will not only setup early console.
+
+	  If unsure, say N.
+
+config FIX_EARLYCON_MEM
+	bool
+	depends on X86
+	default y
+
+config SERIAL_8250_GSC
+	tristate
+	depends on SERIAL_8250 && GSC
+	default SERIAL_8250
+
+config SERIAL_8250_PCI
+	tristate "8250/16550 PCI device support" if EXPERT
+	depends on SERIAL_8250 && PCI
+	default SERIAL_8250
+	help
+	  This builds standard PCI serial support. You may be able to
+	  disable this feature if you only need legacy serial support.
+	  Saves about 9K.
+
+config SERIAL_8250_PNP
+	tristate "8250/16550 PNP device support" if EXPERT
+	depends on SERIAL_8250 && PNP
+	default SERIAL_8250
+	help
+	  This builds standard PNP serial support. You may be able to
+	  disable this feature if you only need legacy serial support.
+
+config SERIAL_8250_HP300
+	tristate
+	depends on SERIAL_8250 && HP300
+	default SERIAL_8250
+
+config SERIAL_8250_CS
+	tristate "8250/16550 PCMCIA device support"
+	depends on PCMCIA && SERIAL_8250
+	---help---
+	  Say Y here to enable support for 16-bit PCMCIA serial devices,
+	  including serial port cards, modems, and the modem functions of
+	  multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
+	  credit-card size devices often used with laptops.)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called serial_cs.
+
+	  If unsure, say N.
+
+config SERIAL_8250_NR_UARTS
+	int "Maximum number of 8250/16550 serial ports"
+	depends on SERIAL_8250
+	default "4"
+	help
+	  Set this to the number of serial ports you want the driver
+	  to support.  This includes any ports discovered via ACPI or
+	  PCI enumeration and any ports that may be added at run-time
+	  via hot-plug, or any ISA multi-port serial cards.
+
+config SERIAL_8250_RUNTIME_UARTS
+	int "Number of 8250/16550 serial ports to register at runtime"
+	depends on SERIAL_8250
+	range 0 SERIAL_8250_NR_UARTS
+	default "4"
+	help
+	  Set this to the maximum number of serial ports you want
+	  the kernel to register at boot time.  This can be overridden
+	  with the module parameter "nr_uarts", or boot-time parameter
+	  8250.nr_uarts
+
+config SERIAL_8250_EXTENDED
+	bool "Extended 8250/16550 serial driver options"
+	depends on SERIAL_8250
+	help
+	  If you wish to use any non-standard features of the standard "dumb"
+	  driver, say Y here. This includes HUB6 support, shared serial
+	  interrupts, special multiport support, support for more than the
+	  four COM 1/2/3/4 boards, etc.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about serial driver options. If unsure, say N.
+
+config SERIAL_8250_MANY_PORTS
+	bool "Support more than 4 legacy serial ports"
+	depends on SERIAL_8250_EXTENDED && !IA64
+	help
+	  Say Y here if you have dumb serial boards other than the four
+	  standard COM 1/2/3/4 ports. This may happen if you have an AST
+	  FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
+	  from <http://www.tldp.org/docs.html#howto>), or other custom
+	  serial port hardware which acts similar to standard serial port
+	  hardware. If you only use the standard COM 1/2/3/4 ports, you can
+	  say N here to save some memory. You can also say Y if you have an
+	  "intelligent" multiport card such as Cyclades, Digiboards, etc.
+
+#
+# Multi-port serial cards
+#
+
+config SERIAL_8250_FOURPORT
+	tristate "Support Fourport cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have an AST FourPort serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_fourport.
+
+config SERIAL_8250_ACCENT
+	tristate "Support Accent cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have an Accent Async serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_accent.
+
+config SERIAL_8250_BOCA
+	tristate "Support Boca cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have a Boca serial board.  Please read the Boca
+	  mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_boca.
+
+config SERIAL_8250_EXAR_ST16C554
+	tristate "Support Exar ST16C554/554D Quad UART"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
+	  tinkering with your Envoy TU301, or have a machine with this UART,
+	  say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_exar_st16c554.
+
+config SERIAL_8250_HUB6
+	tristate "Support Hub6 cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have a HUB6 serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_hub6.
+
+#
+# Misc. options/drivers.
+#
+
+config SERIAL_8250_SHARE_IRQ
+	bool "Support for sharing serial interrupts"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  Some serial boards have hardware support which allows multiple dumb
+	  serial ports on the same board to share a single IRQ. To enable
+	  support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+	bool "Autodetect IRQ on standard ports (unsafe)"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  Say Y here if you want the kernel to try to guess which IRQ
+	  to use for your serial port.
+
+	  This is considered unsafe; it is far better to configure the IRQ in
+	  a boot script using the setserial command.
+
+	  If unsure, say N.
+
+config SERIAL_8250_RSA
+	bool "Support RSA serial ports"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  ::: To be written :::
+
+config SERIAL_8250_MCA
+	tristate "Support 8250-type ports on MCA buses"
+	depends on SERIAL_8250 != n && MCA
+	help
+	  Say Y here if you have a MCA serial ports.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_mca.
+
+config SERIAL_8250_ACORN
+	tristate "Acorn expansion card serial port support"
+	depends on ARCH_ACORN && SERIAL_8250
+	help
+	  If you have an Atomwide Serial card or Serial Port card for an Acorn
+	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
+	  cards.  If unsure, say N.
+
+config SERIAL_8250_RM9K
+	bool "Support for MIPS RM9xxx integrated serial port"
+	depends on SERIAL_8250 != n && SERIAL_RM9000
+	select SERIAL_8250_SHARE_IRQ
+	help
+	  Selecting this option will add support for the integrated serial
+	  port hardware found on MIPS RM9122 and similar processors.
+	  If unsure, say N.
+
+config SERIAL_8250_FSL
+	bool
+	depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
+	default PPC
+
+config SERIAL_8250_DW
+	tristate "Support for Synopsys DesignWare 8250 quirks"
+	depends on SERIAL_8250 && OF
+	help
+	  Selecting this option will enable handling of the extra features
+	  present in the Synopsys DesignWare APB UART.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
new file mode 100644
index 0000000..867bba7
--- /dev/null
+++ b/drivers/tty/serial/8250/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the 8250 serial device drivers.
+#
+
+obj-$(CONFIG_SERIAL_8250)		+= 8250.o
+obj-$(CONFIG_SERIAL_8250_PNP)		+= 8250_pnp.o
+obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
+obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
+obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o
+obj-$(CONFIG_SERIAL_8250_CS)		+= serial_cs.o
+obj-$(CONFIG_SERIAL_8250_ACORN)		+= 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_CONSOLE)	+= 8250_early.o
+obj-$(CONFIG_SERIAL_8250_FOURPORT)	+= 8250_fourport.o
+obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
+obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
+obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
+obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
+obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
+obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o
+obj-$(CONFIG_SERIAL_8250_DW)		+= 8250_dw.o
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/8250/m32r_sio.c
similarity index 100%
rename from drivers/tty/serial/m32r_sio.c
rename to drivers/tty/serial/8250/m32r_sio.c
diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/8250/m32r_sio.h
similarity index 100%
rename from drivers/tty/serial/m32r_sio.h
rename to drivers/tty/serial/8250/m32r_sio.h
diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/8250/m32r_sio_reg.h
similarity index 100%
rename from drivers/tty/serial/m32r_sio_reg.h
rename to drivers/tty/serial/8250/m32r_sio_reg.h
diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
similarity index 100%
rename from drivers/tty/serial/serial_cs.c
rename to drivers/tty/serial/8250/serial_cs.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index aca2386..2de9924 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -5,279 +5,7 @@
 menu "Serial drivers"
 	depends on HAS_IOMEM
 
-#
-# The new 8250/16550 serial drivers
-config SERIAL_8250
-	tristate "8250/16550 and compatible serial support"
-	select SERIAL_CORE
-	---help---
-	  This selects whether you want to include the driver for the standard
-	  serial ports.  The standard answer is Y.  People who might say N
-	  here are those that are setting up dedicated Ethernet WWW/FTP
-	  servers, or users that have one of the various bus mice instead of a
-	  serial mouse and don't intend to use their machine's standard serial
-	  port for anything.  (Note that the Cyclades and Stallion multi
-	  serial port drivers do not need this driver built in for them to
-	  work.)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called 8250.
-	  [WARNING: Do not compile this driver as a module if you are using
-	  non-standard serial ports, since the configuration information will
-	  be lost when the driver is unloaded.  This limitation may be lifted
-	  in the future.]
-
-	  BTW1: If you have a mouseman serial mouse which is not recognized by
-	  the X window system, try running gpm first.
-
-	  BTW2: If you intend to use a software modem (also called Winmodem)
-	  under Linux, forget it.  These modems are crippled and require
-	  proprietary drivers which are only available under Windows.
-
-	  Most people will say Y or M here, so that they can use serial mice,
-	  modems and similar devices connecting to the standard serial ports.
-
-config SERIAL_8250_CONSOLE
-	bool "Console on 8250/16550 and compatible serial port"
-	depends on SERIAL_8250=y
-	select SERIAL_CORE_CONSOLE
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode). This could be useful if some terminal or printer is connected
-	  to that serial port.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (grub or lilo or loadlin) about how to pass options
-	  to the kernel at boot time.)
-
-	  If you don't have a VGA card installed and you say Y here, the
-	  kernel will automatically use the first serial line, /dev/ttyS0, as
-	  system console.
-
-	  You can set that using a kernel command line option such as
-	  "console=uart8250,io,0x3f8,9600n8"
-	  "console=uart8250,mmio,0xff5e0000,115200n8".
-	  and it will switch to normal serial console when the corresponding 
-	  port is ready.
-	  "earlycon=uart8250,io,0x3f8,9600n8"
-	  "earlycon=uart8250,mmio,0xff5e0000,115200n8".
-	  it will not only setup early console.
-
-	  If unsure, say N.
-
-config FIX_EARLYCON_MEM
-	bool
-	depends on X86
-	default y
-
-config SERIAL_8250_GSC
-	tristate
-	depends on SERIAL_8250 && GSC
-	default SERIAL_8250
-
-config SERIAL_8250_PCI
-	tristate "8250/16550 PCI device support" if EXPERT
-	depends on SERIAL_8250 && PCI
-	default SERIAL_8250
-	help
-	  This builds standard PCI serial support. You may be able to
-	  disable this feature if you only need legacy serial support.
-	  Saves about 9K.
-
-config SERIAL_8250_PNP
-	tristate "8250/16550 PNP device support" if EXPERT
-	depends on SERIAL_8250 && PNP
-	default SERIAL_8250
-	help
-	  This builds standard PNP serial support. You may be able to
-	  disable this feature if you only need legacy serial support.
-
-config SERIAL_8250_FSL
-	bool
-	depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
-	default PPC
-
-config SERIAL_8250_HP300
-	tristate
-	depends on SERIAL_8250 && HP300
-	default SERIAL_8250
-
-config SERIAL_8250_CS
-	tristate "8250/16550 PCMCIA device support"
-	depends on PCMCIA && SERIAL_8250
-	---help---
-	  Say Y here to enable support for 16-bit PCMCIA serial devices,
-	  including serial port cards, modems, and the modem functions of
-	  multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
-	  credit-card size devices often used with laptops.)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called serial_cs.
-
-	  If unsure, say N.
-
-config SERIAL_8250_NR_UARTS
-	int "Maximum number of 8250/16550 serial ports"
-	depends on SERIAL_8250
-	default "4"
-	help
-	  Set this to the number of serial ports you want the driver
-	  to support.  This includes any ports discovered via ACPI or
-	  PCI enumeration and any ports that may be added at run-time
-	  via hot-plug, or any ISA multi-port serial cards.
-
-config SERIAL_8250_RUNTIME_UARTS
-	int "Number of 8250/16550 serial ports to register at runtime"
-	depends on SERIAL_8250
-	range 0 SERIAL_8250_NR_UARTS
-	default "4"
-	help
-	  Set this to the maximum number of serial ports you want
-	  the kernel to register at boot time.  This can be overridden
-	  with the module parameter "nr_uarts", or boot-time parameter
-	  8250.nr_uarts
-
-config SERIAL_8250_EXTENDED
-	bool "Extended 8250/16550 serial driver options"
-	depends on SERIAL_8250
-	help
-	  If you wish to use any non-standard features of the standard "dumb"
-	  driver, say Y here. This includes HUB6 support, shared serial
-	  interrupts, special multiport support, support for more than the
-	  four COM 1/2/3/4 boards, etc.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about serial driver options. If unsure, say N.
-
-config SERIAL_8250_MANY_PORTS
-	bool "Support more than 4 legacy serial ports"
-	depends on SERIAL_8250_EXTENDED && !IA64
-	help
-	  Say Y here if you have dumb serial boards other than the four
-	  standard COM 1/2/3/4 ports. This may happen if you have an AST
-	  FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
-	  from <http://www.tldp.org/docs.html#howto>), or other custom
-	  serial port hardware which acts similar to standard serial port
-	  hardware. If you only use the standard COM 1/2/3/4 ports, you can
-	  say N here to save some memory. You can also say Y if you have an
-	  "intelligent" multiport card such as Cyclades, Digiboards, etc.
-
-#
-# Multi-port serial cards
-#
-
-config SERIAL_8250_FOURPORT
-	tristate "Support Fourport cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have an AST FourPort serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_fourport.
-
-config SERIAL_8250_ACCENT
-	tristate "Support Accent cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have an Accent Async serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_accent.
-
-config SERIAL_8250_BOCA
-	tristate "Support Boca cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have a Boca serial board.  Please read the Boca
-	  mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_boca.
-
-config SERIAL_8250_EXAR_ST16C554
-	tristate "Support Exar ST16C554/554D Quad UART"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
-	  tinkering with your Envoy TU301, or have a machine with this UART,
-	  say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_exar_st16c554.
-
-config SERIAL_8250_HUB6
-	tristate "Support Hub6 cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have a HUB6 serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_hub6.
-
-config SERIAL_8250_SHARE_IRQ
-	bool "Support for sharing serial interrupts"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Some serial boards have hardware support which allows multiple dumb
-	  serial ports on the same board to share a single IRQ. To enable
-	  support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
-	bool "Autodetect IRQ on standard ports (unsafe)"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Say Y here if you want the kernel to try to guess which IRQ
-	  to use for your serial port.
-
-	  This is considered unsafe; it is far better to configure the IRQ in
-	  a boot script using the setserial command.
-
-	  If unsure, say N.
-
-config SERIAL_8250_RSA
-	bool "Support RSA serial ports"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  ::: To be written :::
-
-config SERIAL_8250_MCA
-	tristate "Support 8250-type ports on MCA buses"
-	depends on SERIAL_8250 != n && MCA
-	help
-	  Say Y here if you have a MCA serial ports.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_mca.
-
-config SERIAL_8250_ACORN
-	tristate "Acorn expansion card serial port support"
-	depends on ARCH_ACORN && SERIAL_8250
-	help
-	  If you have an Atomwide Serial card or Serial Port card for an Acorn
-	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
-	  cards.  If unsure, say N.
-
-config SERIAL_8250_RM9K
-	bool "Support for MIPS RM9xxx integrated serial port"
-	depends on SERIAL_8250 != n && SERIAL_RM9000
-	select SERIAL_8250_SHARE_IRQ
-	help
-	  Selecting this option will add support for the integrated serial
-	  port hardware found on MIPS RM9122 and similar processors.
-	  If unsure, say N.
-
-config SERIAL_8250_DW
-	tristate "Support for Synopsys DesignWare 8250 quirks"
-	depends on SERIAL_8250 && OF
-	help
-	  Selecting this option will enable handling of the extra features
-	  present in the Synopsys DesignWare APB UART.
+source "drivers/tty/serial/8250/Kconfig"
 
 comment "Non-8250 serial port support"
 
@@ -536,15 +264,6 @@
 	help
 	  MAX3107 chip support
 
-config SERIAL_MAX3107_AAVA
-	tristate "MAX3107 AAVA platform support"
-	depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
-	select SERIAL_CORE
-	help
-	  Support for the MAX3107 chip configuration found on the AAVA
-	  platform. Includes the extra initialisation and GPIO support
-	  neded for this device.
-
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index f5b01f2..fef32e1 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -14,22 +14,9 @@
 obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
 obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
 
-obj-$(CONFIG_SERIAL_8250) += 8250.o
-obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
-obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
-obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
-obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
-obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
-obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
-obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
-obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
-obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
-obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
-obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
-obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
-obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
-obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
+# Now bring in any enabled 8250/16450/16550 type drivers.
+obj-$(CONFIG_SERIAL_8250) += 8250/
+
 obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
@@ -42,7 +29,6 @@
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
-obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 9ae0240..6800f5f 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -159,6 +159,7 @@
 	unsigned int		fifosize;	/* vendor-specific */
 	unsigned int		lcrh_tx;	/* vendor-specific */
 	unsigned int		lcrh_rx;	/* vendor-specific */
+	unsigned int		old_cr;		/* state during shutdown */
 	bool			autorts;
 	char			type[12];
 	bool			interrupt_may_hang; /* vendor-specific */
@@ -1411,7 +1412,9 @@
 	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
 		barrier();
 
-	cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+	/* restore RTS and DTR */
+	cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
+	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
 
 	/* Clear pending error interrupts */
@@ -1469,6 +1472,7 @@
 static void pl011_shutdown(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int cr;
 
 	/*
 	 * disable all interrupts
@@ -1488,9 +1492,16 @@
 
 	/*
 	 * disable the port
+	 * disable the port. It should not disable RTS and DTR.
+	 * Also RTS and DTR state should be preserved to restore
+	 * it during startup().
 	 */
 	uap->autorts = false;
-	writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
+	cr = readw(uap->port.membase + UART011_CR);
+	uap->old_cr = cr;
+	cr &= UART011_CR_RTS | UART011_CR_DTR;
+	cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+	writew(cr, uap->port.membase + UART011_CR);
 
 	/*
 	 * disable break condition and fifos
@@ -1740,9 +1751,19 @@
 {
 	struct uart_amba_port *uap = amba_ports[co->index];
 	unsigned int status, old_cr, new_cr;
+	unsigned long flags;
+	int locked = 1;
 
 	clk_enable(uap->clk);
 
+	local_irq_save(flags);
+	if (uap->port.sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock(&uap->port.lock);
+	else
+		spin_lock(&uap->port.lock);
+
 	/*
 	 *	First save the CR then disable the interrupts
 	 */
@@ -1762,6 +1783,10 @@
 	} while (status & UART01x_FR_BUSY);
 	writew(old_cr, uap->port.membase + UART011_CR);
 
+	if (locked)
+		spin_unlock(&uap->port.lock);
+	local_irq_restore(flags);
+
 	clk_disable(uap->clk);
 }
 
@@ -1905,6 +1930,7 @@
 	uap->vendor = vendor;
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;
+	uap->old_cr = 0;
 	uap->fifosize = vendor->fifosize;
 	uap->interrupt_may_hang = vendor->interrupt_may_hang;
 	uap->port.dev = &dev->dev;
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 7c867a0..7545fe1 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -251,6 +251,7 @@
 	struct jsm_board *brd = pci_get_drvdata(pdev);
 
 	pci_restore_state(pdev);
+	pci_save_state(pdev);
 
 	jsm_uart_port_init(brd);
 }
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
deleted file mode 100644
index aae772a..0000000
--- a/drivers/tty/serial/max3107-aava.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- *  max3107.c - spi uart protocol driver for Maxim 3107
- *  Based on max3100.c
- *	by Christian Pellegrin <chripell@evolware.org>
- *  and	max3110.c
- *	by Feng Tang <feng.tang@intel.com>
- *
- *  Copyright (C) Aavamobile 2009
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/spi/spi.h>
-#include <linux/freezer.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/sfi.h>
-#include <linux/module.h>
-#include <asm/mrst.h>
-#include "max3107.h"
-
-/* GPIO direction to input function */
-static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
-{
-	struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-	u16 buf[1];		/* Buffer for SPI transfer */
-
-	if (offset >= MAX3107_GPIO_COUNT) {
-		dev_err(&s->spi->dev, "Invalid GPIO\n");
-		return -EINVAL;
-	}
-
-	/* Read current GPIO configuration register */
-	buf[0] = MAX3107_GPIOCFG_REG;
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
-		dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
-		return -EIO;
-	}
-	buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-
-	/* Set GPIO to input */
-	buf[0] &= ~(0x0001 << offset);
-
-	/* Write new GPIO configuration register value */
-	buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
-		dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-/* GPIO direction to output function */
-static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
-					int value)
-{
-	struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-	u16 buf[2];	/* Buffer for SPI transfers */
-
-	if (offset >= MAX3107_GPIO_COUNT) {
-		dev_err(&s->spi->dev, "Invalid GPIO\n");
-		return -EINVAL;
-	}
-
-	/* Read current GPIO configuration and data registers */
-	buf[0] = MAX3107_GPIOCFG_REG;
-	buf[1] = MAX3107_GPIODATA_REG;
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
-		dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
-		return -EIO;
-	}
-	buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-	buf[1] &= MAX3107_SPI_RX_DATA_MASK;
-
-	/* Set GPIO to output */
-	buf[0] |= (0x0001 << offset);
-	/* Set value */
-	if (value)
-		buf[1] |= (0x0001 << offset);
-	else
-		buf[1] &= ~(0x0001 << offset);
-
-	/* Write new GPIO configuration and data register values */
-	buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
-	buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
-		dev_err(&s->spi->dev,
-			"SPI transfer for GPIO conf data w failed\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-/* GPIO value query function */
-static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-	u16 buf[1];	/* Buffer for SPI transfer */
-
-	if (offset >= MAX3107_GPIO_COUNT) {
-		dev_err(&s->spi->dev, "Invalid GPIO\n");
-		return -EINVAL;
-	}
-
-	/* Read current GPIO data register */
-	buf[0] = MAX3107_GPIODATA_REG;
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
-		dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
-		return -EIO;
-	}
-	buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-
-	/* Return value */
-	return buf[0] & (0x0001 << offset);
-}
-
-/* GPIO value set function */
-static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-	u16 buf[2];	/* Buffer for SPI transfers */
-
-	if (offset >= MAX3107_GPIO_COUNT) {
-		dev_err(&s->spi->dev, "Invalid GPIO\n");
-		return;
-	}
-
-	/* Read current GPIO configuration registers*/
-	buf[0] = MAX3107_GPIODATA_REG;
-	buf[1] = MAX3107_GPIOCFG_REG;
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
-		dev_err(&s->spi->dev,
-			"SPI transfer for GPIO data and config read failed\n");
-		return;
-	}
-	buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-	buf[1] &= MAX3107_SPI_RX_DATA_MASK;
-
-	if (!(buf[1] & (0x0001 << offset))) {
-		/* Configured as input, can't set value */
-		dev_warn(&s->spi->dev,
-				"Trying to set value for input GPIO\n");
-		return;
-	}
-
-	/* Set value */
-	if (value)
-		buf[0] |= (0x0001 << offset);
-	else
-		buf[0] &= ~(0x0001 << offset);
-
-	/* Write new GPIO data register value */
-	buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, NULL, 2))
-		dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
-}
-
-/* GPIO chip data */
-static struct gpio_chip max3107_gpio_chip = {
-	.owner			= THIS_MODULE,
-	.direction_input	= max3107_gpio_direction_in,
-	.direction_output	= max3107_gpio_direction_out,
-	.get			= max3107_gpio_get,
-	.set			= max3107_gpio_set,
-	.can_sleep		= 1,
-	.base			= MAX3107_GPIO_BASE,
-	.ngpio			= MAX3107_GPIO_COUNT,
-};
-
-/**
- *	max3107_aava_reset	-	reset on AAVA systems
- *	@spi: The SPI device we are probing
- *
- *	Reset the device ready for probing.
- */
-
-static int max3107_aava_reset(struct spi_device *spi)
-{
-	/* Reset the chip */
-	if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
-		pr_err("Requesting RESET GPIO failed\n");
-		return -EIO;
-	}
-	if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
-		pr_err("Setting RESET GPIO to 0 failed\n");
-		gpio_free(MAX3107_RESET_GPIO);
-		return -EIO;
-	}
-	msleep(MAX3107_RESET_DELAY);
-	if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
-		pr_err("Setting RESET GPIO to 1 failed\n");
-		gpio_free(MAX3107_RESET_GPIO);
-		return -EIO;
-	}
-	gpio_free(MAX3107_RESET_GPIO);
-	msleep(MAX3107_WAKEUP_DELAY);
-	return 0;
-}
-
-static int max3107_aava_configure(struct max3107_port *s)
-{
-	int retval;
-
-	/* Initialize GPIO chip data */
-	s->chip = max3107_gpio_chip;
-	s->chip.label = s->spi->modalias;
-	s->chip.dev = &s->spi->dev;
-
-	/* Add GPIO chip */
-	retval = gpiochip_add(&s->chip);
-	if (retval) {
-		dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
-		return retval;
-	}
-
-	/* Temporary fix for EV2 boot problems, set modem reset to 0 */
-	max3107_gpio_direction_out(&s->chip, 3, 0);
-	return 0;
-}
-
-#if 0
-/* This will get enabled once we have the board stuff merged for this
-   specific case */
-
-static const struct baud_table brg13_ext[] = {
-	{ 300,    MAX3107_BRG13_B300 },
-	{ 600,    MAX3107_BRG13_B600 },
-	{ 1200,   MAX3107_BRG13_B1200 },
-	{ 2400,   MAX3107_BRG13_B2400 },
-	{ 4800,   MAX3107_BRG13_B4800 },
-	{ 9600,   MAX3107_BRG13_B9600 },
-	{ 19200,  MAX3107_BRG13_B19200 },
-	{ 57600,  MAX3107_BRG13_B57600 },
-	{ 115200, MAX3107_BRG13_B115200 },
-	{ 230400, MAX3107_BRG13_B230400 },
-	{ 460800, MAX3107_BRG13_B460800 },
-	{ 921600, MAX3107_BRG13_B921600 },
-	{ 0, 0 }
-};
-
-static void max3107_aava_init(struct max3107_port *s)
-{
-	/*override for AAVA SC specific*/
-	if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
-		if (get_koski_build_id() <= KOSKI_EV2)
-			if (s->ext_clk) {
-				s->brg_cfg = MAX3107_BRG13_B9600;
-				s->baud_tbl = (struct baud_table *)brg13_ext;
-			}
-	}
-}
-#endif
-
-static int __devexit max3107_aava_remove(struct spi_device *spi)
-{
-	struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
-	/* Remove GPIO chip */
-	if (gpiochip_remove(&s->chip))
-		dev_warn(&spi->dev, "Removing GPIO chip failed\n");
-
-	/* Then do the default remove */
-	return max3107_remove(spi);
-}
-
-/* Platform data */
-static struct max3107_plat aava_plat_data = {
-	.loopback               = 0,
-	.ext_clk                = 1,
-/*	.init			= max3107_aava_init, */
-	.configure		= max3107_aava_configure,
-	.hw_suspend		= max3107_hw_susp,
-	.polled_mode            = 0,
-	.poll_time              = 0,
-};
-
-
-static int __devinit max3107_probe_aava(struct spi_device *spi)
-{
-	int err = max3107_aava_reset(spi);
-	if (err < 0)
-		return err;
-	return max3107_probe(spi, &aava_plat_data);
-}
-
-/* Spi driver data */
-static struct spi_driver max3107_driver = {
-	.driver = {
-		.name		= "aava-max3107",
-		.owner		= THIS_MODULE,
-	},
-	.probe		= max3107_probe_aava,
-	.remove		= __devexit_p(max3107_aava_remove),
-	.suspend	= max3107_suspend,
-	.resume		= max3107_resume,
-};
-
-/* Driver init function */
-static int __init max3107_init(void)
-{
-	return spi_register_driver(&max3107_driver);
-}
-
-/* Driver exit function */
-static void __exit max3107_exit(void)
-{
-	spi_unregister_driver(&max3107_driver);
-}
-
-module_init(max3107_init);
-module_exit(max3107_exit);
-
-MODULE_DESCRIPTION("MAX3107 driver");
-MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("spi:aava-max3107");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d192dcb..1c24269 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1160,7 +1160,7 @@
 	.cons		= OMAP_CONSOLE,
 };
 
-#ifdef CONFIG_SUSPEND
+#ifdef CONFIG_PM_SLEEP
 static int serial_omap_suspend(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
@@ -1521,6 +1521,7 @@
 	}
 }
 
+#ifdef CONFIG_PM_RUNTIME
 static void serial_omap_restore_context(struct uart_omap_port *up)
 {
 	if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
@@ -1550,7 +1551,6 @@
 		serial_out(up, UART_OMAP_MDR1, up->mdr1);
 }
 
-#ifdef CONFIG_PM_RUNTIME
 static int serial_omap_runtime_suspend(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index c7bf31a..1305618 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2348,11 +2348,11 @@
 	 */
 	tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
 	if (likely(!IS_ERR(tty_dev))) {
-		device_init_wakeup(tty_dev, 1);
-		device_set_wakeup_enable(tty_dev, 0);
-	} else
+		device_set_wakeup_capable(tty_dev, 1);
+	} else {
 		printk(KERN_ERR "Cannot register tty device on line %d\n",
 		       uport->line);
+	}
 
 	/*
 	 * Ensure UPF_DEAD is not set.
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index ef9dd62..bf6e238 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -227,7 +227,6 @@
 	int do_clocal = 0, retval;
 	unsigned long flags;
 	DEFINE_WAIT(wait);
-	int cd;
 
 	/* block if port is in the process of being closed */
 	if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
@@ -284,11 +283,14 @@
 				retval = -ERESTARTSYS;
 			break;
 		}
-		/* Probe the carrier. For devices with no carrier detect this
-		   will always return true */
-		cd = tty_port_carrier_raised(port);
+		/*
+		 * Probe the carrier. For devices with no carrier detect
+		 * tty_port_carrier_raised will always return true.
+		 * Never ask drivers if CLOCAL is set, this causes troubles
+		 * on some hardware.
+		 */
 		if (!(port->flags & ASYNC_CLOSING) &&
-				(do_clocal || cd))
+				(do_clocal || tty_port_carrier_raised(port)))
 			break;
 		if (signal_pending(current)) {
 			retval = -ERESTARTSYS;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 1c50baf..d2b3cff 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -57,6 +57,8 @@
 
 #define WDM_MAX			16
 
+/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
+#define WDM_DEFAULT_BUFSIZE	256
 
 static DEFINE_MUTEX(wdm_mutex);
 
@@ -88,7 +90,8 @@
 	int			count;
 	dma_addr_t		shandle;
 	dma_addr_t		ihandle;
-	struct mutex		lock;
+	struct mutex		wlock;
+	struct mutex		rlock;
 	wait_queue_head_t	wait;
 	struct work_struct	rxwork;
 	int			werr;
@@ -323,7 +326,7 @@
 	}
 
 	/* concurrent writes and disconnect */
-	r = mutex_lock_interruptible(&desc->lock);
+	r = mutex_lock_interruptible(&desc->wlock);
 	rv = -ERESTARTSYS;
 	if (r) {
 		kfree(buf);
@@ -386,7 +389,7 @@
 out:
 	usb_autopm_put_interface(desc->intf);
 outnp:
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 outnl:
 	return rv < 0 ? rv : count;
 }
@@ -399,7 +402,7 @@
 	struct wdm_device *desc = file->private_data;
 
 
-	rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */
+	rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
 	if (rv < 0)
 		return -ERESTARTSYS;
 
@@ -467,14 +470,16 @@
 	for (i = 0; i < desc->length - cntr; i++)
 		desc->ubuf[i] = desc->ubuf[i + cntr];
 
+	spin_lock_irq(&desc->iuspin);
 	desc->length -= cntr;
+	spin_unlock_irq(&desc->iuspin);
 	/* in case we had outstanding data */
 	if (!desc->length)
 		clear_bit(WDM_READ, &desc->flags);
 	rv = cntr;
 
 err:
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->rlock);
 	return rv;
 }
 
@@ -540,7 +545,8 @@
 	}
 	intf->needs_remote_wakeup = 1;
 
-	mutex_lock(&desc->lock);
+	/* using write lock to protect desc->count */
+	mutex_lock(&desc->wlock);
 	if (!desc->count++) {
 		desc->werr = 0;
 		desc->rerr = 0;
@@ -553,7 +559,7 @@
 	} else {
 		rv = 0;
 	}
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 	usb_autopm_put_interface(desc->intf);
 out:
 	mutex_unlock(&wdm_mutex);
@@ -565,9 +571,11 @@
 	struct wdm_device *desc = file->private_data;
 
 	mutex_lock(&wdm_mutex);
-	mutex_lock(&desc->lock);
+
+	/* using write lock to protect desc->count */
+	mutex_lock(&desc->wlock);
 	desc->count--;
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 
 	if (!desc->count) {
 		dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
@@ -630,7 +638,7 @@
 	struct usb_cdc_dmm_desc *dmhd;
 	u8 *buffer = intf->altsetting->extra;
 	int buflen = intf->altsetting->extralen;
-	u16 maxcom = 0;
+	u16 maxcom = WDM_DEFAULT_BUFSIZE;
 
 	if (!buffer)
 		goto out;
@@ -665,7 +673,8 @@
 	desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
 	if (!desc)
 		goto out;
-	mutex_init(&desc->lock);
+	mutex_init(&desc->rlock);
+	mutex_init(&desc->wlock);
 	spin_lock_init(&desc->iuspin);
 	init_waitqueue_head(&desc->wait);
 	desc->wMaxCommand = maxcom;
@@ -716,7 +725,7 @@
 		goto err;
 
 	desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
-					 desc->bMaxPacketSize0,
+					 desc->wMaxCommand,
 					 GFP_KERNEL,
 					 &desc->response->transfer_dma);
 	if (!desc->inbuf)
@@ -779,11 +788,13 @@
 	/* to terminate pending flushes */
 	clear_bit(WDM_IN_USE, &desc->flags);
 	spin_unlock_irqrestore(&desc->iuspin, flags);
-	mutex_lock(&desc->lock);
+	wake_up_all(&desc->wait);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
 	kill_urbs(desc);
 	cancel_work_sync(&desc->rxwork);
-	mutex_unlock(&desc->lock);
-	wake_up_all(&desc->wait);
+	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->rlock);
 	if (!desc->count)
 		cleanup(desc);
 	mutex_unlock(&wdm_mutex);
@@ -798,8 +809,10 @@
 	dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
 
 	/* if this is an autosuspend the caller does the locking */
-	if (!PMSG_IS_AUTO(message))
-		mutex_lock(&desc->lock);
+	if (!PMSG_IS_AUTO(message)) {
+		mutex_lock(&desc->rlock);
+		mutex_lock(&desc->wlock);
+	}
 	spin_lock_irq(&desc->iuspin);
 
 	if (PMSG_IS_AUTO(message) &&
@@ -815,8 +828,10 @@
 		kill_urbs(desc);
 		cancel_work_sync(&desc->rxwork);
 	}
-	if (!PMSG_IS_AUTO(message))
-		mutex_unlock(&desc->lock);
+	if (!PMSG_IS_AUTO(message)) {
+		mutex_unlock(&desc->wlock);
+		mutex_unlock(&desc->rlock);
+	}
 
 	return rv;
 }
@@ -854,7 +869,8 @@
 {
 	struct wdm_device *desc = usb_get_intfdata(intf);
 
-	mutex_lock(&desc->lock);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
 	kill_urbs(desc);
 
 	/*
@@ -876,7 +892,8 @@
 	int rv;
 
 	rv = recover_from_urb_loss(desc);
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->rlock);
 	return 0;
 }
 
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 2f51de5..c8df1dd 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -126,7 +126,6 @@
 		struct dwc3_request *req)
 {
 	struct dwc3		*dwc = dep->dwc;
-	u32			type;
 	int			ret = 0;
 
 	req->request.actual	= 0;
@@ -149,20 +148,14 @@
 
 		direction = !!(dep->flags & DWC3_EP0_DIR_IN);
 
-		if (dwc->ep0state == EP0_STATUS_PHASE) {
-			type = dwc->three_stage_setup
-				? DWC3_TRBCTL_CONTROL_STATUS3
-				: DWC3_TRBCTL_CONTROL_STATUS2;
-		} else if (dwc->ep0state == EP0_DATA_PHASE) {
-			type = DWC3_TRBCTL_CONTROL_DATA;
-		} else {
-			/* should never happen */
-			WARN_ON(1);
+		if (dwc->ep0state != EP0_DATA_PHASE) {
+			dev_WARN(dwc->dev, "Unexpected pending request\n");
 			return 0;
 		}
 
 		ret = dwc3_ep0_start_trans(dwc, direction,
-				req->request.dma, req->request.length, type);
+				req->request.dma, req->request.length,
+				DWC3_TRBCTL_CONTROL_DATA);
 		dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
 				DWC3_EP0_DIR_IN);
 	} else if (dwc->delayed_status) {
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a696bde..064b6e2 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -101,7 +101,7 @@
 	if (req->request.num_mapped_sgs) {
 		req->request.dma = DMA_ADDR_INVALID;
 		dma_unmap_sg(dwc->dev, req->request.sg,
-				req->request.num_sgs,
+				req->request.num_mapped_sgs,
 				req->direction ? DMA_TO_DEVICE
 				: DMA_FROM_DEVICE);
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index a95de6a..baaebf2 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -175,13 +175,12 @@
 	_ep->comp_desc = comp_desc;
 	if (g->speed == USB_SPEED_SUPER) {
 		switch (usb_endpoint_type(_ep->desc)) {
-		case USB_ENDPOINT_XFER_BULK:
-		case USB_ENDPOINT_XFER_INT:
-			_ep->maxburst = comp_desc->bMaxBurst;
-			break;
 		case USB_ENDPOINT_XFER_ISOC:
 			/* mult: bits 1:0 of bmAttributes */
 			_ep->mult = comp_desc->bmAttributes & 0x3;
+		case USB_ENDPOINT_XFER_BULK:
+		case USB_ENDPOINT_XFER_INT:
+			_ep->maxburst = comp_desc->bMaxBurst;
 			break;
 		default:
 			/* Do nothing for control endpoints */
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 753aa06..e0e6375 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -126,7 +126,7 @@
 	 * descriptor and see if the EP matches it
 	 */
 	if (usb_endpoint_xfer_bulk(desc)) {
-		if (ep_comp) {
+		if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
 			num_req_streams = ep_comp->bmAttributes & 0x1f;
 			if (num_req_streams > ep->max_streams)
 				return 0;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 6353eca..ee8ceec 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -3123,15 +3123,15 @@
 
 struct fsg_module_parameters {
 	char		*file[FSG_MAX_LUNS];
-	int		ro[FSG_MAX_LUNS];
-	int		removable[FSG_MAX_LUNS];
-	int		cdrom[FSG_MAX_LUNS];
-	int		nofua[FSG_MAX_LUNS];
+	bool		ro[FSG_MAX_LUNS];
+	bool		removable[FSG_MAX_LUNS];
+	bool		cdrom[FSG_MAX_LUNS];
+	bool		nofua[FSG_MAX_LUNS];
 
 	unsigned int	file_count, ro_count, removable_count, cdrom_count;
 	unsigned int	nofua_count;
 	unsigned int	luns;	/* nluns */
-	int		stall;	/* can_stall */
+	bool		stall;	/* can_stall */
 };
 
 #define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index d7ea6c0..b04712f 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1430,7 +1430,7 @@
 			int pipe = get_pipe_by_windex(wIndex);
 			struct fsl_ep *ep;
 
-			if (wValue != 0 || wLength != 0 || pipe > udc->max_ep)
+			if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep)
 				break;
 			ep = get_ep_by_pipe(udc, pipe);
 
@@ -1673,7 +1673,7 @@
 	if (!bit_pos)
 		return;
 
-	for (i = 0; i < udc->max_ep * 2; i++) {
+	for (i = 0; i < udc->max_ep; i++) {
 		ep_num = i >> 1;
 		direction = i % 2;
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index fa0fcc1..e2293c1 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -11,11 +11,6 @@
 /* #undef	DEBUG */
 /* #undef	VERBOSE_DEBUG */
 
-#if defined(CONFIG_USB_LANGWELL_OTG)
-#define	OTG_TRANSCEIVER
-#endif
-
-
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -1522,8 +1517,7 @@
 
 
 /* stop all USB activities */
-static void stop_activity(struct langwell_udc *dev,
-		struct usb_gadget_driver *driver)
+static void stop_activity(struct langwell_udc *dev)
 {
 	struct langwell_ep	*ep;
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
@@ -1535,9 +1529,9 @@
 	}
 
 	/* report disconnect; the driver is already quiesced */
-	if (driver) {
+	if (dev->driver) {
 		spin_unlock(&dev->lock);
-		driver->disconnect(&dev->gadget);
+		dev->driver->disconnect(&dev->gadget);
 		spin_lock(&dev->lock);
 	}
 
@@ -1925,11 +1919,10 @@
 
 	/* stop all usb activities */
 	dev->gadget.speed = USB_SPEED_UNKNOWN;
-	stop_activity(dev, driver);
-	spin_unlock_irqrestore(&dev->lock, flags);
-
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
+	stop_activity(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
 
 	device_remove_file(&dev->pdev->dev, &dev_attr_function);
 
@@ -2315,13 +2308,9 @@
 
 			if (!gadget_is_otg(&dev->gadget))
 				break;
-			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
+			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
 				dev->gadget.b_hnp_enable = 1;
-#ifdef	OTG_TRANSCEIVER
-				if (!dev->lotg->otg.default_a)
-					dev->lotg->hsm.b_hnp_enable = 1;
-#endif
-			} else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
+			else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
 				dev->gadget.a_hnp_support = 1;
 			else if (setup->bRequest ==
 					USB_DEVICE_A_ALT_HNP_SUPPORT)
@@ -2733,7 +2722,7 @@
 		dev->bus_reset = 1;
 
 		/* reset all the queues, stop all USB activities */
-		stop_activity(dev, dev->driver);
+		stop_activity(dev);
 		dev->usb_state = USB_STATE_DEFAULT;
 	} else {
 		dev_vdbg(&dev->pdev->dev, "device controller reset\n");
@@ -2741,7 +2730,7 @@
 		langwell_udc_reset(dev);
 
 		/* reset all the queues, stop all USB activities */
-		stop_activity(dev, dev->driver);
+		stop_activity(dev);
 
 		/* reset ep0 dQH and endptctrl */
 		ep0_reset(dev);
@@ -2752,12 +2741,6 @@
 		dev->usb_state = USB_STATE_ATTACHED;
 	}
 
-#ifdef	OTG_TRANSCEIVER
-	/* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
-	if (!dev->lotg->otg.default_a)
-		dev->lotg->hsm.b_hnp_enable = 0;
-#endif
-
 	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 }
 
@@ -2770,29 +2753,6 @@
 	dev->resume_state = dev->usb_state;
 	dev->usb_state = USB_STATE_SUSPENDED;
 
-#ifdef	OTG_TRANSCEIVER
-	if (dev->lotg->otg.default_a) {
-		if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
-			dev->lotg->hsm.b_bus_suspend = 1;
-			/* notify transceiver the state changes */
-			if (spin_trylock(&dev->lotg->wq_lock)) {
-				langwell_update_transceiver();
-				spin_unlock(&dev->lotg->wq_lock);
-			}
-		}
-		dev->lotg->hsm.b_bus_suspend_vld++;
-	} else {
-		if (!dev->lotg->hsm.a_bus_suspend) {
-			dev->lotg->hsm.a_bus_suspend = 1;
-			/* notify transceiver the state changes */
-			if (spin_trylock(&dev->lotg->wq_lock)) {
-				langwell_update_transceiver();
-				spin_unlock(&dev->lotg->wq_lock);
-			}
-		}
-	}
-#endif
-
 	/* report suspend to the driver */
 	if (dev->driver) {
 		if (dev->driver->suspend) {
@@ -2823,11 +2783,6 @@
 	if (dev->pdev->device != 0x0829)
 		langwell_phy_low_power(dev, 0);
 
-#ifdef	OTG_TRANSCEIVER
-	if (dev->lotg->otg.default_a == 0)
-		dev->lotg->hsm.a_bus_suspend = 0;
-#endif
-
 	/* report resume to the driver */
 	if (dev->driver) {
 		if (dev->driver->resume) {
@@ -3020,7 +2975,6 @@
 
 	dev->done = &done;
 
-#ifndef	OTG_TRANSCEIVER
 	/* free dTD dma_pool and dQH */
 	if (dev->dtd_pool)
 		dma_pool_destroy(dev->dtd_pool);
@@ -3032,7 +2986,6 @@
 	/* release SRAM caching */
 	if (dev->has_sram && dev->got_sram)
 		sram_deinit(dev);
-#endif
 
 	if (dev->status_req) {
 		kfree(dev->status_req->req.buf);
@@ -3045,7 +2998,6 @@
 	if (dev->got_irq)
 		free_irq(pdev->irq, dev);
 
-#ifndef	OTG_TRANSCEIVER
 	if (dev->cap_regs)
 		iounmap(dev->cap_regs);
 
@@ -3055,13 +3007,6 @@
 
 	if (dev->enabled)
 		pci_disable_device(pdev);
-#else
-	if (dev->transceiver) {
-		otg_put_transceiver(dev->transceiver);
-		dev->transceiver = NULL;
-		dev->lotg = NULL;
-	}
-#endif
 
 	dev->cap_regs = NULL;
 
@@ -3072,9 +3017,7 @@
 	device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
 	device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
 
-#ifndef	OTG_TRANSCEIVER
 	pci_set_drvdata(pdev, NULL);
-#endif
 
 	/* free dev, wait for the release() finished */
 	wait_for_completion(&done);
@@ -3089,9 +3032,7 @@
 		const struct pci_device_id *id)
 {
 	struct langwell_udc	*dev;
-#ifndef	OTG_TRANSCEIVER
 	unsigned long		resource, len;
-#endif
 	void			__iomem *base = NULL;
 	size_t			size;
 	int			retval;
@@ -3109,16 +3050,6 @@
 	dev->pdev = pdev;
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
-#ifdef	OTG_TRANSCEIVER
-	/* PCI device is already enabled by otg_transceiver driver */
-	dev->enabled = 1;
-
-	/* mem region and register base */
-	dev->region = 1;
-	dev->transceiver = otg_get_transceiver();
-	dev->lotg = otg_to_langwell(dev->transceiver);
-	base = dev->lotg->regs;
-#else
 	pci_set_drvdata(pdev, dev);
 
 	/* now all the pci goodies ... */
@@ -3139,7 +3070,6 @@
 	dev->region = 1;
 
 	base = ioremap_nocache(resource, len);
-#endif
 	if (base == NULL) {
 		dev_err(&dev->pdev->dev, "can't map memory\n");
 		retval = -EFAULT;
@@ -3163,7 +3093,6 @@
 	dev->got_sram = 0;
 	dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
 
-#ifndef	OTG_TRANSCEIVER
 	/* enable SRAM caching if detected */
 	if (dev->has_sram && !dev->got_sram)
 		sram_init(dev);
@@ -3182,7 +3111,6 @@
 		goto error;
 	}
 	dev->got_irq = 1;
-#endif
 
 	/* set stopped bit */
 	dev->stopped = 1;
@@ -3257,10 +3185,8 @@
 	dev->remote_wakeup = 0;
 	dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
 
-#ifndef	OTG_TRANSCEIVER
 	/* reset device controller */
 	langwell_udc_reset(dev);
-#endif
 
 	/* initialize gadget structure */
 	dev->gadget.ops = &langwell_ops;	/* usb_gadget_ops */
@@ -3268,9 +3194,6 @@
 	INIT_LIST_HEAD(&dev->gadget.ep_list);	/* ep_list */
 	dev->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
 	dev->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
-#ifdef	OTG_TRANSCEIVER
-	dev->gadget.is_otg = 1;			/* support otg mode */
-#endif
 
 	/* the "gadget" abstracts/virtualizes the controller */
 	dev_set_name(&dev->gadget.dev, "gadget");
@@ -3282,10 +3205,8 @@
 	/* controller endpoints reinit */
 	eps_reinit(dev);
 
-#ifndef	OTG_TRANSCEIVER
 	/* reset ep0 dQH and endptctrl */
 	ep0_reset(dev);
-#endif
 
 	/* create dTD dma_pool resource */
 	dev->dtd_pool = dma_pool_create("langwell_dtd",
@@ -3367,7 +3288,7 @@
 
 	spin_lock_irq(&dev->lock);
 	/* stop all usb activities */
-	stop_activity(dev, dev->driver);
+	stop_activity(dev);
 	spin_unlock_irq(&dev->lock);
 
 	/* free dTD dma_pool and dQH */
@@ -3525,22 +3446,14 @@
 
 static int __init init(void)
 {
-#ifdef	OTG_TRANSCEIVER
-	return langwell_register_peripheral(&langwell_pci_driver);
-#else
 	return pci_register_driver(&langwell_pci_driver);
-#endif
 }
 module_init(init);
 
 
 static void __exit cleanup(void)
 {
-#ifdef	OTG_TRANSCEIVER
-	return langwell_unregister_peripheral(&langwell_pci_driver);
-#else
 	pci_unregister_driver(&langwell_pci_driver);
-#endif
 }
 module_exit(cleanup);
 
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
index ef79e24..d6e78ac 100644
--- a/drivers/usb/gadget/langwell_udc.h
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -8,7 +8,6 @@
  */
 
 #include <linux/usb/langwell_udc.h>
-#include <linux/usb/langwell_otg.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index c7f291a..85ea14e 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -598,16 +598,16 @@
 		| USB_5GBPS_OPERATION),
 	.bFunctionalitySupport = USB_LOW_SPEED_OPERATION,
 	.bU1devExitLat =	USB_DEFAULT_U1_DEV_EXIT_LAT,
-	.bU2DevExitLat =	USB_DEFAULT_U2_DEV_EXIT_LAT,
+	.bU2DevExitLat =	cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT),
 };
 
 static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
 	.bLength =		USB_DT_BOS_SIZE,
 	.bDescriptorType =	USB_DT_BOS,
 
-	.wTotalLength =		USB_DT_BOS_SIZE
+	.wTotalLength =		cpu_to_le16(USB_DT_BOS_SIZE
 				+ USB_DT_USB_EXT_CAP_SIZE
-				+ USB_DT_USB_SS_CAP_SIZE,
+				+ USB_DT_USB_SS_CAP_SIZE),
 
 	.bNumDeviceCaps =	2,
 };
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index e90344a..b556a72 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -125,7 +125,7 @@
 	 */
 	if (pdata->init && pdata->init(pdev)) {
 		retval = -ENODEV;
-		goto err3;
+		goto err4;
 	}
 
 	/* Enable USB controller, 83xx or 8536 */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f4b627d..01bb7241d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -276,6 +276,9 @@
 
 	/* Serial Bus Release Number is at PCI 0x60 offset */
 	pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
+	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
+		ehci->sbrn = 0x20; /* ConneXT has no sbrn register */
 
 	/* Keep this around for a while just in case some EHCI
 	 * implementation uses legacy PCI PM support.  This test
@@ -526,6 +529,9 @@
 	/* handle any USB 2.0 EHCI controller */
 	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
 	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
+	}, {
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
+	.driver_data = (unsigned long) &ehci_pci_hc_driver,
 	},
 	{ /* end: all zeroes */ }
 };
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5df0b0e..77afabc 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -139,8 +139,23 @@
 	}
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
+	if (IS_ERR(iclk)) {
+		dev_err(&pdev->dev, "failed to get ohci_clk\n");
+		retval = PTR_ERR(iclk);
+		goto err3;
+	}
 	fclk = clk_get(&pdev->dev, "uhpck");
+	if (IS_ERR(fclk)) {
+		dev_err(&pdev->dev, "failed to get uhpck\n");
+		retval = PTR_ERR(fclk);
+		goto err4;
+	}
 	hclk = clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(hclk)) {
+		dev_err(&pdev->dev, "failed to get hclk\n");
+		retval = PTR_ERR(hclk);
+		goto err5;
+	}
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -153,9 +168,12 @@
 	at91_stop_hc(pdev);
 
 	clk_put(hclk);
+ err5:
 	clk_put(fclk);
+ err4:
 	clk_put(iclk);
 
+ err3:
 	iounmap(hcd->regs);
 
  err2:
@@ -226,7 +244,8 @@
 	if (!gpio_is_valid(pdata->vbus_pin[port]))
 		return;
 
-	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+	gpio_set_value(pdata->vbus_pin[port],
+		       !pdata->vbus_pin_active_low[port] ^ enable);
 }
 
 static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -237,7 +256,8 @@
 	if (!gpio_is_valid(pdata->vbus_pin[port]))
 		return -EINVAL;
 
-	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+	return gpio_get_value(pdata->vbus_pin[port]) ^
+		!pdata->vbus_pin_active_low[port];
 }
 
 /*
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 5179fcd..e4bcb62 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -82,6 +82,14 @@
 		ohci_dbg(ohci,format, ## arg ); \
 	} while (0);
 
+/* Version for use where "next" is the address of a local variable */
+#define ohci_dbg_nosw(ohci, next, size, format, arg...) \
+	do { \
+		unsigned s_len; \
+		s_len = scnprintf(*next, *size, format, ## arg); \
+		*size -= s_len; *next += s_len; \
+	} while (0);
+
 
 static void ohci_dump_intr_mask (
 	struct ohci_hcd *ohci,
@@ -653,7 +661,7 @@
 
 	/* dump driver info, then registers in spec order */
 
-	ohci_dbg_sw (ohci, &next, &size,
+	ohci_dbg_nosw(ohci, &next, &size,
 		"bus %s, device %s\n"
 		"%s\n"
 		"%s\n",
@@ -672,7 +680,7 @@
 
 	/* hcca */
 	if (ohci->hcca)
-		ohci_dbg_sw (ohci, &next, &size,
+		ohci_dbg_nosw(ohci, &next, &size,
 			"hcca frame 0x%04x\n", ohci_frame_no(ohci));
 
 	/* other registers mostly affect frame timings */
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 6109810..1843bb6 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -397,6 +397,10 @@
 	/* handle any USB OHCI controller */
 	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
+	}, {
+	/* The device in the ConneXT I/O hub has no class reg */
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
 	}, { /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE (pci, pci_ids);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b90e138..b62037b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1204,6 +1204,7 @@
  *
  * Returns a zero-based port number, which is suitable for indexing into each of
  * the split roothubs' port arrays and bus state arrays.
+ * Add one to it in order to call xhci_find_slot_id_by_port.
  */
 static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
 		struct xhci_hcd *xhci, u32 port_id)
@@ -1324,7 +1325,7 @@
 			xhci_set_link_state(xhci, port_array, faked_port_index,
 						XDEV_U0);
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					faked_port_index);
+					faked_port_index + 1);
 			if (!slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto cleanup;
@@ -3323,7 +3324,8 @@
 		/* Check TD length */
 		if (running_total != td_len) {
 			xhci_err(xhci, "ISOC TD length unmatch\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto cleanup;
 		}
 	}
 
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index d9b6a03..da97dce 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -37,9 +37,6 @@
 static int emi26_load_firmware (struct usb_device *dev);
 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
 static void emi26_disconnect(struct usb_interface *intf);
-static int __init emi26_init (void);
-static void __exit emi26_exit (void);
-
 
 /* thanks to drivers/usb/serial/keyspan_pda.c code */
 static int emi26_writememory (struct usb_device *dev, int address,
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 9f39062..4e0f167 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -46,9 +46,6 @@
 static int emi62_load_firmware (struct usb_device *dev);
 static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
 static void emi62_disconnect(struct usb_interface *intf);
-static int __init emi62_init (void);
-static void __exit emi62_exit (void);
-
 
 /* thanks to drivers/usb/serial/keyspan_pda.c code */
 static int emi62_writememory(struct usb_device *dev, int address,
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 107bf13..b2d82b9 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -24,7 +24,7 @@
 
 #define VENDOR_ID	0x0fc5
 #define PRODUCT_ID	0x1227
-#define MAXLEN		6
+#define MAXLEN		8
 
 /* table of devices that work with this driver */
 static const struct usb_device_id id_table[] = {
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index f9a3f62..7c569f5 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -33,9 +33,6 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/gpio.h>
 #include <mach/cputype.h>
 
 #include <asm/mach-types.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 56cf024..3d11cf64 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -981,6 +981,9 @@
 	unsigned long	flags;
 
 	pm_runtime_get_sync(musb->controller);
+
+	musb_gadget_cleanup(musb);
+
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
@@ -1827,8 +1830,6 @@
 	sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
 #endif
 
-	musb_gadget_cleanup(musb);
-
 	if (musb->nIrq >= 0) {
 		if (musb->irq_wake)
 			disable_irq_wake(musb->nIrq);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c27bbbf..df719ea 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -222,7 +222,6 @@
 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 }
 
-/* blocking notifier support */
 static int musb_otg_notifications(struct notifier_block *nb,
 		unsigned long event, void *unused)
 {
@@ -231,7 +230,7 @@
 	musb->xceiv_event = event;
 	schedule_work(&musb->otg_notifier_work);
 
-	return 0;
+	return NOTIFY_OK;
 }
 
 static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
@@ -386,6 +385,7 @@
 static int omap2430_musb_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
+	cancel_work_sync(&musb->otg_notifier_work);
 
 	omap2430_low_level_exit(musb);
 	otg_put_transceiver(musb->xceiv);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 2a25955..76d6293 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -86,20 +86,6 @@
 	  built-in with usb ip or which are autonomous and doesn't require any
 	  phy programming such as ISP1x04 etc.
 
-config USB_LANGWELL_OTG
-	tristate "Intel Langwell USB OTG dual-role support"
-	depends on USB && PCI && INTEL_SCU_IPC
-	select USB_OTG
-	select USB_OTG_UTILS
-	help
-	  Say Y here if you want to build Intel Langwell USB OTG
-	  transciever driver in kernel. This driver implements role
-	  switch between EHCI host driver and Langwell USB OTG
-	  client driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called langwell_otg.
-
 config USB_MSM_OTG
 	tristate "OTG support for Qualcomm on-chip USB controller"
 	depends on (USB || USB_GADGET) && ARCH_MSM
@@ -124,7 +110,7 @@
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2
+	depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
 	select USB_OTG
 	select USB_OTG_UTILS
 	help
@@ -132,7 +118,7 @@
 
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
-	depends on USB_MV_UDC
+	depends on USB_MV_UDC && USB_SUSPEND
 	select USB_OTG
 	select USB_OTG_UTILS
 	help
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index b2c5a95..41aa509 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -13,7 +13,6 @@
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
 obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)	+= ulpi_viewport.o
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
deleted file mode 100644
index f08f784..0000000
--- a/drivers/usb/otg/langwell_otg.c
+++ /dev/null
@@ -1,2347 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2010, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/hcd.h>
-#include <linux/notifier.h>
-#include <linux/delay.h>
-#include <asm/intel_scu_ipc.h>
-
-#include <linux/usb/langwell_otg.h>
-
-#define	DRIVER_DESC		"Intel Langwell USB OTG transceiver driver"
-#define	DRIVER_VERSION		"July 10, 2010"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "langwell_otg";
-
-static int langwell_otg_probe(struct pci_dev *pdev,
-			const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-				struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-				struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-
-static const struct pci_device_id pci_ids[] = {{
-	.class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
-	.class_mask =   ~0,
-	.vendor =	0x8086,
-	.device =	0x0811,
-	.subvendor =	PCI_ANY_ID,
-	.subdevice =	PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-static struct pci_driver otg_pci_driver = {
-	.name =		(char *) driver_name,
-	.id_table =	pci_ids,
-
-	.probe =	langwell_otg_probe,
-	.remove =	langwell_otg_remove,
-
-	.suspend =	langwell_otg_suspend,
-	.resume =	langwell_otg_resume,
-};
-
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
-	struct langwell_otg_timer *timer;
-	timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
-	if (timer == NULL)
-		return timer;
-
-	timer->function = function;
-	timer->expires = expires;
-	timer->data = data;
-	return timer;
-}
-
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_aidl_bdis_tmr,
-	*b_se0_srp_tmr, *b_srp_init_tmr;
-
-static struct list_head active_timers;
-
-static struct langwell_otg *the_transceiver;
-
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver(void)
-{
-	struct langwell_otg *lnw = the_transceiver;
-
-	dev_dbg(lnw->dev, "transceiver is updated\n");
-
-	if (!lnw->qwork)
-		return ;
-
-	queue_work(lnw->qwork, &lnw->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-					struct usb_bus *host)
-{
-	otg->host = host;
-
-	return 0;
-}
-
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-					struct usb_gadget *gadget)
-{
-	otg->gadget = gadget;
-
-	return 0;
-}
-
-static int langwell_otg_set_power(struct otg_transceiver *otg,
-				unsigned mA)
-{
-	return 0;
-}
-
-/* A-device drives vbus, controlled through IPC commands */
-static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	u8				sub_id;
-
-	dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off");
-
-	if (enabled)
-		sub_id = 0x8; /* Turn on the VBus */
-	else
-		sub_id = 0x9; /* Turn off the VBus */
-
-	if (intel_scu_ipc_simple_command(0xef, sub_id)) {
-		dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n");
-		return -EBUSY;
-	}
-
-	dev_dbg(lnw->dev, "%s --->\n", __func__);
-
-	return 0;
-}
-
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	u32	val;
-
-	val = readl(lnw->iotg.base + CI_OTGSC);
-
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
-				lnw->iotg.base + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
-				lnw->iotg.base + CI_OTGSC);
-}
-
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val;
-
-	dev_dbg(lnw->dev, "%s --->\n", __func__);
-
-	val = readl(iotg->base + CI_OTGSC);
-
-	writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
-				iotg->base + CI_OTGSC);
-
-	/* Check if the data plus is finished or not */
-	msleep(8);
-	val = readl(iotg->base + CI_OTGSC);
-	if (val & (OTGSC_HADP | OTGSC_DP))
-		dev_dbg(lnw->dev, "DataLine SRP Error\n");
-
-	/* Disable interrupt - b_sess_vld */
-	val = readl(iotg->base + CI_OTGSC);
-	val &= (~(OTGSC_BSVIE | OTGSC_BSEIE));
-	writel(val, iotg->base + CI_OTGSC);
-
-	/* Start VBus SRP, drive vbus to generate VBus pulse */
-	iotg->otg.set_vbus(&iotg->otg, true);
-	msleep(15);
-	iotg->otg.set_vbus(&iotg->otg, false);
-
-	/* Enable interrupt - b_sess_vld*/
-	val = readl(iotg->base + CI_OTGSC);
-	dev_dbg(lnw->dev, "after VBUS pulse otgsc = %x\n", val);
-
-	val |= (OTGSC_BSVIE | OTGSC_BSEIE);
-	writel(val, iotg->base + CI_OTGSC);
-
-	/* If Vbus is valid, then update the hsm */
-	if (val & OTGSC_BSV) {
-		dev_dbg(lnw->dev, "no b_sess_vld interrupt\n");
-
-		lnw->iotg.hsm.b_sess_vld = 1;
-		langwell_update_transceiver();
-	}
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-	return 0;
-}
-
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	struct usb_hcd		*hcd;
-	int			err;
-
-	dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "suspend" : "resume");
-
-	hcd = bus_to_hcd(lnw->iotg.otg.host);
-	if (on)
-		err = hcd->driver->bus_resume(hcd);
-	else
-		err = hcd->driver->bus_suspend(hcd);
-
-	if (err)
-		dev_dbg(lnw->dev, "Fail to resume/suspend USB bus - %d\n", err);
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-
-static int langwell_otg_check_otgsc(void)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	u32				otgsc, usbcfg;
-
-	dev_dbg(lnw->dev, "check sync OTGSC and USBCFG registers\n");
-
-	otgsc = readl(lnw->iotg.base + CI_OTGSC);
-	usbcfg = readl(lnw->usbcfg);
-
-	dev_dbg(lnw->dev, "OTGSC = %08x, USBCFG = %08x\n",
-					otgsc, usbcfg);
-	dev_dbg(lnw->dev, "OTGSC_AVV = %d\n", !!(otgsc & OTGSC_AVV));
-	dev_dbg(lnw->dev, "USBCFG.VBUSVAL = %d\n",
-					!!(usbcfg & USBCFG_VBUSVAL));
-	dev_dbg(lnw->dev, "OTGSC_ASV = %d\n", !!(otgsc & OTGSC_ASV));
-	dev_dbg(lnw->dev, "USBCFG.AVALID = %d\n",
-					!!(usbcfg & USBCFG_AVALID));
-	dev_dbg(lnw->dev, "OTGSC_BSV = %d\n", !!(otgsc & OTGSC_BSV));
-	dev_dbg(lnw->dev, "USBCFG.BVALID = %d\n",
-					!!(usbcfg & USBCFG_BVALID));
-	dev_dbg(lnw->dev, "OTGSC_BSE = %d\n", !!(otgsc & OTGSC_BSE));
-	dev_dbg(lnw->dev, "USBCFG.SESEND = %d\n",
-					!!(usbcfg & USBCFG_SESEND));
-
-	/* Check USBCFG VBusValid/AValid/BValid/SessEnd */
-	if (!!(otgsc & OTGSC_AVV) ^ !!(usbcfg & USBCFG_VBUSVAL)) {
-		dev_dbg(lnw->dev, "OTGSC.AVV != USBCFG.VBUSVAL\n");
-		goto err;
-	}
-	if (!!(otgsc & OTGSC_ASV) ^ !!(usbcfg & USBCFG_AVALID)) {
-		dev_dbg(lnw->dev, "OTGSC.ASV != USBCFG.AVALID\n");
-		goto err;
-	}
-	if (!!(otgsc & OTGSC_BSV) ^ !!(usbcfg & USBCFG_BVALID)) {
-		dev_dbg(lnw->dev, "OTGSC.BSV != USBCFG.BVALID\n");
-		goto err;
-	}
-	if (!!(otgsc & OTGSC_BSE) ^ !!(usbcfg & USBCFG_SESEND)) {
-		dev_dbg(lnw->dev, "OTGSC.BSE != USBCFG.SESSEN\n");
-		goto err;
-	}
-
-	dev_dbg(lnw->dev, "OTGSC and USBCFG are synced\n");
-
-	return 0;
-
-err:
-	dev_warn(lnw->dev, "OTGSC isn't equal to USBCFG\n");
-	return -EPIPE;
-}
-
-
-static void langwell_otg_phy_low_power(int on)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u8				val, phcd;
-	int				retval;
-
-	dev_dbg(lnw->dev, "%s ---> %s mode\n",
-			__func__, on ? "Low power" : "Normal");
-
-	phcd = 0x40;
-
-	val = readb(iotg->base + CI_HOSTPC1 + 2);
-
-	if (on) {
-		/* Due to hardware issue, after set PHCD, sync will failed
-		 * between USBCFG and OTGSC, so before set PHCD, check if
-		 * sync is in process now. If the answer is "yes", then do
-		 * not touch PHCD bit */
-		retval = langwell_otg_check_otgsc();
-		if (retval) {
-			dev_dbg(lnw->dev, "Skip PHCD programming..\n");
-			return ;
-		}
-
-		writeb(val | phcd, iotg->base + CI_HOSTPC1 + 2);
-	} else
-		writeb(val & ~phcd, iotg->base + CI_HOSTPC1 + 2);
-
-	dev_dbg(lnw->dev, "%s <--- done\n", __func__);
-}
-
-/* After drv vbus, add 5 ms delay to set PHCD */
-static void langwell_otg_phy_low_power_wait(int on)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-
-	dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n");
-
-	mdelay(5);
-	langwell_otg_phy_low_power(on);
-}
-
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val;
-
-	dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-
-	val = readl(iotg->base + CI_OTGSC);
-
-	/* OTGSC_INT_MASK doesn't contains 1msInt */
-	if (on) {
-		val = val | (OTGSC_INT_MASK);
-		writel(val, iotg->base + CI_OTGSC);
-	} else {
-		val = val & ~(OTGSC_INT_MASK);
-		writel(val, iotg->base + CI_OTGSC);
-	}
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val;
-
-	dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-
-	val = readl(iotg->base + CI_OTGSC);
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
-					iotg->base + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
-					iotg->base + CI_OTGSC);
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val;
-
-	dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-
-	val = readl(iotg->base + CI_OTGSC);
-	if (on)
-		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
-					iotg->base + CI_OTGSC);
-	else
-		writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
-					iotg->base + CI_OTGSC);
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-
-static int langwell_otg_check_se0_srp(int on)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	int			delay_time = TB_SE0_SRP * 10;
-	u32			val;
-
-	dev_dbg(lnw->dev, "%s --->\n", __func__);
-
-	do {
-		udelay(100);
-		if (!delay_time--)
-			break;
-		val = readl(lnw->iotg.base + CI_PORTSC1);
-		val &= PORTSC_LS;
-	} while (!val);
-
-	dev_dbg(lnw->dev, "%s <---\n", __func__);
-	return val;
-}
-
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
-	*(int *)indicator = 1;
-}
-
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-
-	switch (indicator) {
-	case 2:
-	case 4:
-	case 6:
-	case 7:
-		dev_warn(lnw->dev,
-			"OTG:NSF-%lu - deivce not responding\n", indicator);
-		break;
-	case 3:
-		dev_warn(lnw->dev,
-			"OTG:NSF-%lu - deivce not supported\n", indicator);
-		break;
-	default:
-		dev_warn(lnw->dev, "Do not have this kind of NSF\n");
-		break;
-	}
-}
-
-/* Initialize timers */
-static int langwell_otg_init_timers(struct otg_hsm *hsm)
-{
-	/* HSM used timers */
-	a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
-				(unsigned long)&hsm->a_wait_vrise_tmout);
-	if (a_wait_vrise_tmr == NULL)
-		return -ENOMEM;
-	a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
-				(unsigned long)&hsm->a_aidl_bdis_tmout);
-	if (a_aidl_bdis_tmr == NULL)
-		return -ENOMEM;
-	b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
-				(unsigned long)&hsm->b_se0_srp);
-	if (b_se0_srp_tmr == NULL)
-		return -ENOMEM;
-	b_srp_init_tmr = otg_timer_initializer(&set_tmout, TB_SRP_INIT,
-				(unsigned long)&hsm->b_srp_init_tmout);
-	if (b_srp_init_tmr == NULL)
-		return -ENOMEM;
-
-	return 0;
-}
-
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
-	kfree(a_wait_vrise_tmr);
-	kfree(a_aidl_bdis_tmr);
-	kfree(b_se0_srp_tmr);
-	kfree(b_srp_init_tmr);
-}
-
-/* The timeout callback function to set time out bit */
-static void langwell_otg_timer_fn(unsigned long indicator)
-{
-	struct langwell_otg *lnw = the_transceiver;
-
-	*(int *)indicator = 1;
-
-	dev_dbg(lnw->dev, "kernel timer - timeout\n");
-
-	langwell_update_transceiver();
-}
-
-/* kernel timer used instead of HW based interrupt */
-static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	unsigned long		j = jiffies;
-	unsigned long		data, time;
-
-	switch (timers) {
-	case TA_WAIT_VRISE_TMR:
-		iotg->hsm.a_wait_vrise_tmout = 0;
-		data = (unsigned long)&iotg->hsm.a_wait_vrise_tmout;
-		time = TA_WAIT_VRISE;
-		break;
-	case TA_WAIT_BCON_TMR:
-		iotg->hsm.a_wait_bcon_tmout = 0;
-		data = (unsigned long)&iotg->hsm.a_wait_bcon_tmout;
-		time = TA_WAIT_BCON;
-		break;
-	case TA_AIDL_BDIS_TMR:
-		iotg->hsm.a_aidl_bdis_tmout = 0;
-		data = (unsigned long)&iotg->hsm.a_aidl_bdis_tmout;
-		time = TA_AIDL_BDIS;
-		break;
-	case TB_ASE0_BRST_TMR:
-		iotg->hsm.b_ase0_brst_tmout = 0;
-		data = (unsigned long)&iotg->hsm.b_ase0_brst_tmout;
-		time = TB_ASE0_BRST;
-		break;
-	case TB_SRP_INIT_TMR:
-		iotg->hsm.b_srp_init_tmout = 0;
-		data = (unsigned long)&iotg->hsm.b_srp_init_tmout;
-		time = TB_SRP_INIT;
-		break;
-	case TB_SRP_FAIL_TMR:
-		iotg->hsm.b_srp_fail_tmout = 0;
-		data = (unsigned long)&iotg->hsm.b_srp_fail_tmout;
-		time = TB_SRP_FAIL;
-		break;
-	case TB_BUS_SUSPEND_TMR:
-		iotg->hsm.b_bus_suspend_tmout = 0;
-		data = (unsigned long)&iotg->hsm.b_bus_suspend_tmout;
-		time = TB_BUS_SUSPEND;
-		break;
-	default:
-		dev_dbg(lnw->dev, "unknown timer, cannot enable it\n");
-		return;
-	}
-
-	lnw->hsm_timer.data = data;
-	lnw->hsm_timer.function = langwell_otg_timer_fn;
-	lnw->hsm_timer.expires = j + time * HZ / 1000; /* milliseconds */
-
-	add_timer(&lnw->hsm_timer);
-
-	dev_dbg(lnw->dev, "add timer successfully\n");
-}
-
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
-	struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-	struct langwell_otg_timer *tmp_timer;
-	struct intel_mid_otg_xceiv *iotg = &the_transceiver->iotg;
-	u32	val32;
-
-	/* Check if the timer is already in the active list,
-	 * if so update timer count
-	 */
-	list_for_each_entry(tmp_timer, &active_timers, list)
-		if (tmp_timer == timer) {
-			timer->count = timer->expires;
-			return;
-		}
-	timer->count = timer->expires;
-
-	if (list_empty(&active_timers)) {
-		val32 = readl(iotg->base + CI_OTGSC);
-		writel(val32 | OTGSC_1MSE, iotg->base + CI_OTGSC);
-	}
-
-	list_add_tail(&timer->list, &active_timers);
-}
-
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
-	struct langwell_otg *lnw = the_transceiver;
-	struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-	struct langwell_otg_timer *tmp_timer, *del_tmp;
-	u32 val32;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
-		if (tmp_timer == timer)
-			list_del(&timer->list);
-
-	if (list_empty(&active_timers)) {
-		val32 = readl(lnw->iotg.base + CI_OTGSC);
-		writel(val32 & ~OTGSC_1MSE, lnw->iotg.base + CI_OTGSC);
-	}
-}
-
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	struct langwell_otg_timer *tmp_timer, *del_tmp;
-	int expired = 0;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
-		tmp_timer->count--;
-		/* check if timer expires */
-		if (!tmp_timer->count) {
-			list_del(&tmp_timer->list);
-			tmp_timer->function(tmp_timer->data);
-			expired = 1;
-		}
-	}
-
-	if (list_empty(&active_timers)) {
-		dev_dbg(lnw->dev, "tick timer: disable 1ms int\n");
-		*int_sts = *int_sts & ~OTGSC_1MSE;
-	}
-	return expired;
-}
-
-static void reset_otg(void)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	int			delay_time = 1000;
-	u32			val;
-
-	dev_dbg(lnw->dev, "reseting OTG controller ...\n");
-	val = readl(lnw->iotg.base + CI_USBCMD);
-	writel(val | USBCMD_RST, lnw->iotg.base + CI_USBCMD);
-	do {
-		udelay(100);
-		if (!delay_time--)
-			dev_dbg(lnw->dev, "reset timeout\n");
-		val = readl(lnw->iotg.base + CI_USBCMD);
-		val &= USBCMD_RST;
-	} while (val != 0);
-	dev_dbg(lnw->dev, "reset done.\n");
-}
-
-static void set_host_mode(void)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	u32			val;
-
-	reset_otg();
-	val = readl(lnw->iotg.base + CI_USBMODE);
-	val = (val & (~USBMODE_CM)) | USBMODE_HOST;
-	writel(val, lnw->iotg.base + CI_USBMODE);
-}
-
-static void set_client_mode(void)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	u32			val;
-
-	reset_otg();
-	val = readl(lnw->iotg.base + CI_USBMODE);
-	val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
-	writel(val, lnw->iotg.base + CI_USBMODE);
-}
-
-static void init_hsm(void)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val32;
-
-	/* read OTGSC after reset */
-	val32 = readl(lnw->iotg.base + CI_OTGSC);
-	dev_dbg(lnw->dev, "%s: OTGSC init value = 0x%x\n", __func__, val32);
-
-	/* set init state */
-	if (val32 & OTGSC_ID) {
-		iotg->hsm.id = 1;
-		iotg->otg.default_a = 0;
-		set_client_mode();
-		iotg->otg.state = OTG_STATE_B_IDLE;
-	} else {
-		iotg->hsm.id = 0;
-		iotg->otg.default_a = 1;
-		set_host_mode();
-		iotg->otg.state = OTG_STATE_A_IDLE;
-	}
-
-	/* set session indicator */
-	if (val32 & OTGSC_BSE)
-		iotg->hsm.b_sess_end = 1;
-	if (val32 & OTGSC_BSV)
-		iotg->hsm.b_sess_vld = 1;
-	if (val32 & OTGSC_ASV)
-		iotg->hsm.a_sess_vld = 1;
-	if (val32 & OTGSC_AVV)
-		iotg->hsm.a_vbus_vld = 1;
-
-	/* defautly power the bus */
-	iotg->hsm.a_bus_req = 1;
-	iotg->hsm.a_bus_drop = 0;
-	/* defautly don't request bus as B device */
-	iotg->hsm.b_bus_req = 0;
-	/* no system error */
-	iotg->hsm.a_clr_err = 0;
-
-	langwell_otg_phy_low_power_wait(1);
-}
-
-static void update_hsm(void)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				val32;
-
-	/* read OTGSC */
-	val32 = readl(lnw->iotg.base + CI_OTGSC);
-	dev_dbg(lnw->dev, "%s: OTGSC value = 0x%x\n", __func__, val32);
-
-	iotg->hsm.id = !!(val32 & OTGSC_ID);
-	iotg->hsm.b_sess_end = !!(val32 & OTGSC_BSE);
-	iotg->hsm.b_sess_vld = !!(val32 & OTGSC_BSV);
-	iotg->hsm.a_sess_vld = !!(val32 & OTGSC_ASV);
-	iotg->hsm.a_vbus_vld = !!(val32 & OTGSC_AVV);
-}
-
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	void __iomem		*reg_base = _dev;
-	u32			val;
-	u32			int_mask = 0;
-
-	val = readl(reg_base + CI_USBMODE);
-	if ((val & USBMODE_CM) != USBMODE_DEVICE)
-		return IRQ_NONE;
-
-	val = readl(reg_base + CI_USBSTS);
-	int_mask = val & INTR_DUMMY_MASK;
-
-	if (int_mask == 0)
-		return IRQ_NONE;
-
-	/* clear hsm.b_conn here since host driver can't detect it
-	*  otg_dummy_irq called means B-disconnect happened.
-	*/
-	if (lnw->iotg.hsm.b_conn) {
-		lnw->iotg.hsm.b_conn = 0;
-		if (spin_trylock(&lnw->wq_lock)) {
-			langwell_update_transceiver();
-			spin_unlock(&lnw->wq_lock);
-		}
-	}
-
-	/* Clear interrupts */
-	writel(int_mask, reg_base + CI_USBSTS);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
-	struct langwell_otg		*lnw = _dev;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	u32				int_sts, int_en;
-	u32				int_mask = 0;
-	int				flag = 0;
-
-	int_sts = readl(lnw->iotg.base + CI_OTGSC);
-	int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
-	int_mask = int_sts & int_en;
-	if (int_mask == 0)
-		return IRQ_NONE;
-
-	if (int_mask & OTGSC_IDIS) {
-		dev_dbg(lnw->dev, "%s: id change int\n", __func__);
-		iotg->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
-		dev_dbg(lnw->dev, "id = %d\n", iotg->hsm.id);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_DPIS) {
-		dev_dbg(lnw->dev, "%s: data pulse int\n", __func__);
-		iotg->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
-		dev_dbg(lnw->dev, "data pulse = %d\n", iotg->hsm.a_srp_det);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_BSEIS) {
-		dev_dbg(lnw->dev, "%s: b session end int\n", __func__);
-		iotg->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
-		dev_dbg(lnw->dev, "b_sess_end = %d\n", iotg->hsm.b_sess_end);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_BSVIS) {
-		dev_dbg(lnw->dev, "%s: b session valid int\n", __func__);
-		iotg->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
-		dev_dbg(lnw->dev, "b_sess_vld = %d\n", iotg->hsm.b_sess_end);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_ASVIS) {
-		dev_dbg(lnw->dev, "%s: a session valid int\n", __func__);
-		iotg->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
-		dev_dbg(lnw->dev, "a_sess_vld = %d\n", iotg->hsm.a_sess_vld);
-		flag = 1;
-	}
-	if (int_mask & OTGSC_AVVIS) {
-		dev_dbg(lnw->dev, "%s: a vbus valid int\n", __func__);
-		iotg->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
-		dev_dbg(lnw->dev, "a_vbus_vld = %d\n", iotg->hsm.a_vbus_vld);
-		flag = 1;
-	}
-
-	if (int_mask & OTGSC_1MSS) {
-		/* need to schedule otg_work if any timer is expired */
-		if (langwell_otg_tick_timer(&int_sts))
-			flag = 1;
-	}
-
-	writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
-					lnw->iotg.base + CI_OTGSC);
-	if (flag)
-		langwell_update_transceiver();
-
-	return IRQ_HANDLED;
-}
-
-static int langwell_otg_iotg_notify(struct notifier_block *nb,
-				unsigned long action, void *data)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = data;
-	int				flag = 0;
-
-	if (iotg == NULL)
-		return NOTIFY_BAD;
-
-	if (lnw == NULL)
-		return NOTIFY_BAD;
-
-	switch (action) {
-	case MID_OTG_NOTIFY_CONNECT:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Connect Event\n");
-		if (iotg->otg.default_a == 1)
-			iotg->hsm.b_conn = 1;
-		else
-			iotg->hsm.a_conn = 1;
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_DISCONN:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Disconnect Event\n");
-		if (iotg->otg.default_a == 1)
-			iotg->hsm.b_conn = 0;
-		else
-			iotg->hsm.a_conn = 0;
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_HSUSPEND:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus suspend Event\n");
-		if (iotg->otg.default_a == 1)
-			iotg->hsm.a_suspend_req = 1;
-		else
-			iotg->hsm.b_bus_req = 0;
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_HRESUME:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus resume Event\n");
-		if (iotg->otg.default_a == 1)
-			iotg->hsm.b_bus_resume = 1;
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_CSUSPEND:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus suspend Event\n");
-		if (iotg->otg.default_a == 1) {
-			if (iotg->hsm.b_bus_suspend_vld == 2) {
-				iotg->hsm.b_bus_suspend = 1;
-				iotg->hsm.b_bus_suspend_vld = 0;
-				flag = 1;
-			} else {
-				iotg->hsm.b_bus_suspend_vld++;
-				flag = 0;
-			}
-		} else {
-			if (iotg->hsm.a_bus_suspend == 0) {
-				iotg->hsm.a_bus_suspend = 1;
-				flag = 1;
-			}
-		}
-		break;
-	case MID_OTG_NOTIFY_CRESUME:
-		dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus resume Event\n");
-		if (iotg->otg.default_a == 0)
-			iotg->hsm.a_bus_suspend = 0;
-		flag = 0;
-		break;
-	case MID_OTG_NOTIFY_HOSTADD:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver Add\n");
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_HOSTREMOVE:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver remove\n");
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_CLIENTADD:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver Add\n");
-		flag = 1;
-		break;
-	case MID_OTG_NOTIFY_CLIENTREMOVE:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver remove\n");
-		flag = 1;
-		break;
-	default:
-		dev_dbg(lnw->dev, "Lnw OTG Nofity unknown notify message\n");
-		return NOTIFY_DONE;
-	}
-
-	if (flag)
-		langwell_update_transceiver();
-
-	return NOTIFY_OK;
-}
-
-static void langwell_otg_work(struct work_struct *work)
-{
-	struct langwell_otg		*lnw;
-	struct intel_mid_otg_xceiv	*iotg;
-	int				retval;
-	struct pci_dev			*pdev;
-
-	lnw = container_of(work, struct langwell_otg, work);
-	iotg = &lnw->iotg;
-	pdev = to_pci_dev(lnw->dev);
-
-	dev_dbg(lnw->dev, "%s: old state = %s\n", __func__,
-			otg_state_string(iotg->otg.state));
-
-	switch (iotg->otg.state) {
-	case OTG_STATE_UNDEFINED:
-	case OTG_STATE_B_IDLE:
-		if (!iotg->hsm.id) {
-			langwell_otg_del_timer(b_srp_init_tmr);
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.b_sess_vld) {
-			langwell_otg_del_timer(b_srp_init_tmr);
-			del_timer_sync(&lnw->hsm_timer);
-			iotg->hsm.b_sess_end = 0;
-			iotg->hsm.a_bus_suspend = 0;
-			langwell_otg_chrg_vbus(0);
-
-			if (lnw->iotg.start_peripheral) {
-				lnw->iotg.start_peripheral(&lnw->iotg);
-				iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-			} else
-				dev_dbg(lnw->dev, "client driver not loaded\n");
-
-		} else if (iotg->hsm.b_srp_init_tmout) {
-			iotg->hsm.b_srp_init_tmout = 0;
-			dev_warn(lnw->dev, "SRP init timeout\n");
-		} else if (iotg->hsm.b_srp_fail_tmout) {
-			iotg->hsm.b_srp_fail_tmout = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			/* No silence failure */
-			langwell_otg_nsf_msg(6);
-		} else if (iotg->hsm.b_bus_req && iotg->hsm.b_sess_end) {
-			del_timer_sync(&lnw->hsm_timer);
-			/* workaround for b_se0_srp detection */
-			retval = langwell_otg_check_se0_srp(0);
-			if (retval) {
-				iotg->hsm.b_bus_req = 0;
-				dev_dbg(lnw->dev, "LS isn't SE0, try later\n");
-			} else {
-				/* clear the PHCD before start srp */
-				langwell_otg_phy_low_power(0);
-
-				/* Start SRP */
-				langwell_otg_add_timer(b_srp_init_tmr);
-				iotg->otg.start_srp(&iotg->otg);
-				langwell_otg_del_timer(b_srp_init_tmr);
-				langwell_otg_add_ktimer(TB_SRP_FAIL_TMR);
-
-				/* reset PHY low power mode here */
-				langwell_otg_phy_low_power_wait(1);
-			}
-		}
-		break;
-	case OTG_STATE_B_SRP_INIT:
-		if (!iotg->hsm.id) {
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_chrg_vbus(0);
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.b_sess_vld) {
-			langwell_otg_chrg_vbus(0);
-			if (lnw->iotg.start_peripheral) {
-				lnw->iotg.start_peripheral(&lnw->iotg);
-				iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-			} else
-				dev_dbg(lnw->dev, "client driver not loaded\n");
-		}
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		if (!iotg->hsm.id) {
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.b_sess_vld) {
-			iotg->hsm.b_hnp_enable = 0;
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			iotg->otg.state = OTG_STATE_B_IDLE;
-		} else if (iotg->hsm.b_bus_req && iotg->otg.gadget &&
-					iotg->otg.gadget->b_hnp_enable &&
-					iotg->hsm.a_bus_suspend) {
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			langwell_otg_HAAR(1);
-			iotg->hsm.a_conn = 0;
-
-			if (lnw->iotg.start_host) {
-				lnw->iotg.start_host(&lnw->iotg);
-				iotg->otg.state = OTG_STATE_B_WAIT_ACON;
-			} else
-				dev_dbg(lnw->dev,
-						"host driver not loaded.\n");
-
-			iotg->hsm.a_bus_resume = 0;
-			langwell_otg_add_ktimer(TB_ASE0_BRST_TMR);
-		}
-		break;
-
-	case OTG_STATE_B_WAIT_ACON:
-		if (!iotg->hsm.id) {
-			/* delete hsm timer for b_ase0_brst_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-
-			langwell_otg_HAAR(0);
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.b_sess_vld) {
-			/* delete hsm timer for b_ase0_brst_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->hsm.b_hnp_enable = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			langwell_otg_chrg_vbus(0);
-			langwell_otg_HAAR(0);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-		} else if (iotg->hsm.a_conn) {
-			/* delete hsm timer for b_ase0_brst_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			langwell_otg_HAAR(0);
-			iotg->otg.state = OTG_STATE_B_HOST;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_bus_resume ||
-				iotg->hsm.b_ase0_brst_tmout) {
-			/* delete hsm timer for b_ase0_brst_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			langwell_otg_HAAR(0);
-			langwell_otg_nsf_msg(7);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			iotg->hsm.a_bus_suspend = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			if (lnw->iotg.start_peripheral)
-				lnw->iotg.start_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver not loaded.\n");
-
-			iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-		}
-		break;
-
-	case OTG_STATE_B_HOST:
-		if (!iotg->hsm.id) {
-			iotg->otg.default_a = 1;
-			iotg->hsm.a_srp_det = 0;
-
-			langwell_otg_chrg_vbus(0);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.b_sess_vld) {
-			iotg->hsm.b_hnp_enable = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			langwell_otg_chrg_vbus(0);
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-		} else if ((!iotg->hsm.b_bus_req) ||
-				(!iotg->hsm.a_conn)) {
-			iotg->hsm.b_bus_req = 0;
-			langwell_otg_loc_sof(0);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			iotg->hsm.a_bus_suspend = 0;
-
-			if (lnw->iotg.start_peripheral)
-				lnw->iotg.start_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-						"client driver not loaded.\n");
-
-			iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-		}
-		break;
-
-	case OTG_STATE_A_IDLE:
-		iotg->otg.default_a = 1;
-		if (iotg->hsm.id) {
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-			iotg->hsm.vbus_srp_up = 0;
-
-			langwell_otg_chrg_vbus(0);
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_bus_drop &&
-			(iotg->hsm.a_srp_det || iotg->hsm.a_bus_req)) {
-			langwell_otg_phy_low_power(0);
-
-			/* Turn on VBus */
-			iotg->otg.set_vbus(&iotg->otg, true);
-
-			iotg->hsm.vbus_srp_up = 0;
-			iotg->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_bus_drop && iotg->hsm.a_sess_vld) {
-			iotg->hsm.vbus_srp_up = 1;
-		} else if (!iotg->hsm.a_sess_vld && iotg->hsm.vbus_srp_up) {
-			msleep(10);
-			langwell_otg_phy_low_power(0);
-
-			/* Turn on VBus */
-			iotg->otg.set_vbus(&iotg->otg, true);
-			iotg->hsm.a_srp_det = 1;
-			iotg->hsm.vbus_srp_up = 0;
-			iotg->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_sess_vld &&
-				!iotg->hsm.vbus_srp_up) {
-			langwell_otg_phy_low_power(1);
-		}
-		break;
-	case OTG_STATE_A_WAIT_VRISE:
-		if (iotg->hsm.id) {
-			langwell_otg_del_timer(a_wait_vrise_tmr);
-			iotg->hsm.b_bus_req = 0;
-			iotg->otg.default_a = 0;
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-		} else if (iotg->hsm.a_vbus_vld) {
-			langwell_otg_del_timer(a_wait_vrise_tmr);
-			iotg->hsm.b_conn = 0;
-			if (lnw->iotg.start_host)
-				lnw->iotg.start_host(&lnw->iotg);
-			else {
-				dev_dbg(lnw->dev, "host driver not loaded.\n");
-				break;
-			}
-
-			langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-			iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-		} else if (iotg->hsm.a_wait_vrise_tmout) {
-			iotg->hsm.b_conn = 0;
-			if (iotg->hsm.a_vbus_vld) {
-				if (lnw->iotg.start_host)
-					lnw->iotg.start_host(&lnw->iotg);
-				else {
-					dev_dbg(lnw->dev,
-						"host driver not loaded.\n");
-					break;
-				}
-				langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-				iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-			} else {
-
-				/* Turn off VBus */
-				iotg->otg.set_vbus(&iotg->otg, false);
-				langwell_otg_phy_low_power_wait(1);
-				iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-			}
-		}
-		break;
-	case OTG_STATE_A_WAIT_BCON:
-		if (iotg->hsm.id) {
-			/* delete hsm timer for a_wait_bcon_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_vbus_vld) {
-			/* delete hsm timer for a_wait_bcon_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (iotg->hsm.a_bus_drop ||
-				(iotg->hsm.a_wait_bcon_tmout &&
-				!iotg->hsm.a_bus_req)) {
-			/* delete hsm timer for a_wait_bcon_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (iotg->hsm.b_conn) {
-			/* delete hsm timer for a_wait_bcon_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			iotg->hsm.a_suspend_req = 0;
-			iotg->otg.state = OTG_STATE_A_HOST;
-			if (iotg->hsm.a_srp_det && iotg->otg.host &&
-					!iotg->otg.host->b_hnp_enable) {
-				/* SRP capable peripheral-only device */
-				iotg->hsm.a_bus_req = 1;
-				iotg->hsm.a_srp_det = 0;
-			} else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
-					iotg->otg.host->b_hnp_enable) {
-				/* It is not safe enough to do a fast
-				 * transition from A_WAIT_BCON to
-				 * A_SUSPEND */
-				msleep(10000);
-				if (iotg->hsm.a_bus_req)
-					break;
-
-				if (request_irq(pdev->irq,
-					otg_dummy_irq, IRQF_SHARED,
-					driver_name, iotg->base) != 0) {
-					dev_dbg(lnw->dev,
-						"request interrupt %d fail\n",
-						pdev->irq);
-				}
-
-				langwell_otg_HABA(1);
-				iotg->hsm.b_bus_resume = 0;
-				iotg->hsm.a_aidl_bdis_tmout = 0;
-
-				langwell_otg_loc_sof(0);
-				/* clear PHCD to enable HW timer */
-				langwell_otg_phy_low_power(0);
-				langwell_otg_add_timer(a_aidl_bdis_tmr);
-				iotg->otg.state = OTG_STATE_A_SUSPEND;
-			} else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
-				!iotg->otg.host->b_hnp_enable) {
-				if (lnw->iotg.stop_host)
-					lnw->iotg.stop_host(&lnw->iotg);
-				else
-					dev_dbg(lnw->dev,
-						"host driver removed.\n");
-
-				/* Turn off VBus */
-				iotg->otg.set_vbus(&iotg->otg, false);
-				iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-			}
-		}
-		break;
-	case OTG_STATE_A_HOST:
-		if (iotg->hsm.id) {
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_bus_drop ||
-				(iotg->otg.host &&
-				!iotg->otg.host->b_hnp_enable &&
-					!iotg->hsm.a_bus_req)) {
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (!iotg->hsm.a_vbus_vld) {
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (iotg->otg.host &&
-				iotg->otg.host->b_hnp_enable &&
-				!iotg->hsm.a_bus_req) {
-			/* Set HABA to enable hardware assistance to signal
-			 *  A-connect after receiver B-disconnect. Hardware
-			 *  will then set client mode and enable URE, SLE and
-			 *  PCE after the assistance. otg_dummy_irq is used to
-			 *  clean these ints when client driver is not resumed.
-			 */
-			if (request_irq(pdev->irq, otg_dummy_irq, IRQF_SHARED,
-					driver_name, iotg->base) != 0) {
-				dev_dbg(lnw->dev,
-					"request interrupt %d failed\n",
-						pdev->irq);
-			}
-
-			/* set HABA */
-			langwell_otg_HABA(1);
-			iotg->hsm.b_bus_resume = 0;
-			iotg->hsm.a_aidl_bdis_tmout = 0;
-			langwell_otg_loc_sof(0);
-			/* clear PHCD to enable HW timer */
-			langwell_otg_phy_low_power(0);
-			langwell_otg_add_timer(a_aidl_bdis_tmr);
-			iotg->otg.state = OTG_STATE_A_SUSPEND;
-		} else if (!iotg->hsm.b_conn || !iotg->hsm.a_bus_req) {
-			langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-			iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-		}
-		break;
-	case OTG_STATE_A_SUSPEND:
-		if (iotg->hsm.id) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_bus_req ||
-				iotg->hsm.b_bus_resume) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-			iotg->hsm.a_suspend_req = 0;
-			langwell_otg_loc_sof(1);
-			iotg->otg.state = OTG_STATE_A_HOST;
-		} else if (iotg->hsm.a_aidl_bdis_tmout ||
-				iotg->hsm.a_bus_drop) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (!iotg->hsm.b_conn && iotg->otg.host &&
-				iotg->otg.host->b_hnp_enable) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			iotg->hsm.b_bus_suspend = 0;
-			iotg->hsm.b_bus_suspend_vld = 0;
-
-			/* msleep(200); */
-			if (lnw->iotg.start_peripheral)
-				lnw->iotg.start_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver not loaded.\n");
-
-			langwell_otg_add_ktimer(TB_BUS_SUSPEND_TMR);
-			iotg->otg.state = OTG_STATE_A_PERIPHERAL;
-			break;
-		} else if (!iotg->hsm.a_vbus_vld) {
-			langwell_otg_del_timer(a_aidl_bdis_tmr);
-			langwell_otg_HABA(0);
-			free_irq(pdev->irq, iotg->base);
-			if (lnw->iotg.stop_host)
-				lnw->iotg.stop_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"host driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-		}
-		break;
-	case OTG_STATE_A_PERIPHERAL:
-		if (iotg->hsm.id) {
-			/* delete hsm timer for b_bus_suspend_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-			iotg->otg.default_a = 0;
-			iotg->hsm.b_bus_req = 0;
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			set_client_mode();
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (!iotg->hsm.a_vbus_vld) {
-			/* delete hsm timer for b_bus_suspend_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			langwell_otg_phy_low_power_wait(1);
-			iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-		} else if (iotg->hsm.a_bus_drop) {
-			/* delete hsm timer for b_bus_suspend_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			/* Turn off VBus */
-			iotg->otg.set_vbus(&iotg->otg, false);
-			iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-		} else if (iotg->hsm.b_bus_suspend) {
-			/* delete hsm timer for b_bus_suspend_tmr */
-			del_timer_sync(&lnw->hsm_timer);
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			if (lnw->iotg.start_host)
-				lnw->iotg.start_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-						"host driver not loaded.\n");
-			langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-			iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-		} else if (iotg->hsm.b_bus_suspend_tmout) {
-			u32	val;
-			val = readl(lnw->iotg.base + CI_PORTSC1);
-			if (!(val & PORTSC_SUSP))
-				break;
-
-			if (lnw->iotg.stop_peripheral)
-				lnw->iotg.stop_peripheral(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-					"client driver has been removed.\n");
-
-			if (lnw->iotg.start_host)
-				lnw->iotg.start_host(&lnw->iotg);
-			else
-				dev_dbg(lnw->dev,
-						"host driver not loaded.\n");
-			langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-			iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-		}
-		break;
-	case OTG_STATE_A_VBUS_ERR:
-		if (iotg->hsm.id) {
-			iotg->otg.default_a = 0;
-			iotg->hsm.a_clr_err = 0;
-			iotg->hsm.a_srp_det = 0;
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_clr_err) {
-			iotg->hsm.a_clr_err = 0;
-			iotg->hsm.a_srp_det = 0;
-			reset_otg();
-			init_hsm();
-			if (iotg->otg.state == OTG_STATE_A_IDLE)
-				langwell_update_transceiver();
-		} else {
-			/* FW will clear PHCD bit when any VBus
-			 * event detected. Reset PHCD to 1 again */
-			langwell_otg_phy_low_power(1);
-		}
-		break;
-	case OTG_STATE_A_WAIT_VFALL:
-		if (iotg->hsm.id) {
-			iotg->otg.default_a = 0;
-			set_client_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_B_IDLE;
-			langwell_update_transceiver();
-		} else if (iotg->hsm.a_bus_req) {
-
-			/* Turn on VBus */
-			iotg->otg.set_vbus(&iotg->otg, true);
-			iotg->hsm.a_wait_vrise_tmout = 0;
-			langwell_otg_add_timer(a_wait_vrise_tmr);
-			iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-		} else if (!iotg->hsm.a_sess_vld) {
-			iotg->hsm.a_srp_det = 0;
-			set_host_mode();
-			langwell_otg_phy_low_power(1);
-			iotg->otg.state = OTG_STATE_A_IDLE;
-		}
-		break;
-	default:
-		;
-	}
-
-	dev_dbg(lnw->dev, "%s: new state = %s\n", __func__,
-			otg_state_string(iotg->otg.state));
-}
-
-static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	char			*next;
-	unsigned		size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size,
-		"\n"
-		"USBCMD = 0x%08x\n"
-		"USBSTS = 0x%08x\n"
-		"USBINTR = 0x%08x\n"
-		"ASYNCLISTADDR = 0x%08x\n"
-		"PORTSC1 = 0x%08x\n"
-		"HOSTPC1 = 0x%08x\n"
-		"OTGSC = 0x%08x\n"
-		"USBMODE = 0x%08x\n",
-		readl(lnw->iotg.base + 0x30),
-		readl(lnw->iotg.base + 0x34),
-		readl(lnw->iotg.base + 0x38),
-		readl(lnw->iotg.base + 0x48),
-		readl(lnw->iotg.base + 0x74),
-		readl(lnw->iotg.base + 0xb4),
-		readl(lnw->iotg.base + 0xf4),
-		readl(lnw->iotg.base + 0xf8)
-	     );
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	char				*next;
-	unsigned			size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	if (iotg->otg.host)
-		iotg->hsm.a_set_b_hnp_en = iotg->otg.host->b_hnp_enable;
-
-	if (iotg->otg.gadget)
-		iotg->hsm.b_hnp_enable = iotg->otg.gadget->b_hnp_enable;
-
-	t = scnprintf(next, size,
-		"\n"
-		"current state = %s\n"
-		"a_bus_resume = \t%d\n"
-		"a_bus_suspend = \t%d\n"
-		"a_conn = \t%d\n"
-		"a_sess_vld = \t%d\n"
-		"a_srp_det = \t%d\n"
-		"a_vbus_vld = \t%d\n"
-		"b_bus_resume = \t%d\n"
-		"b_bus_suspend = \t%d\n"
-		"b_conn = \t%d\n"
-		"b_se0_srp = \t%d\n"
-		"b_sess_end = \t%d\n"
-		"b_sess_vld = \t%d\n"
-		"id = \t%d\n"
-		"a_set_b_hnp_en = \t%d\n"
-		"b_srp_done = \t%d\n"
-		"b_hnp_enable = \t%d\n"
-		"a_wait_vrise_tmout = \t%d\n"
-		"a_wait_bcon_tmout = \t%d\n"
-		"a_aidl_bdis_tmout = \t%d\n"
-		"b_ase0_brst_tmout = \t%d\n"
-		"a_bus_drop = \t%d\n"
-		"a_bus_req = \t%d\n"
-		"a_clr_err = \t%d\n"
-		"a_suspend_req = \t%d\n"
-		"b_bus_req = \t%d\n"
-		"b_bus_suspend_tmout = \t%d\n"
-		"b_bus_suspend_vld = \t%d\n",
-		otg_state_string(iotg->otg.state),
-		iotg->hsm.a_bus_resume,
-		iotg->hsm.a_bus_suspend,
-		iotg->hsm.a_conn,
-		iotg->hsm.a_sess_vld,
-		iotg->hsm.a_srp_det,
-		iotg->hsm.a_vbus_vld,
-		iotg->hsm.b_bus_resume,
-		iotg->hsm.b_bus_suspend,
-		iotg->hsm.b_conn,
-		iotg->hsm.b_se0_srp,
-		iotg->hsm.b_sess_end,
-		iotg->hsm.b_sess_vld,
-		iotg->hsm.id,
-		iotg->hsm.a_set_b_hnp_en,
-		iotg->hsm.b_srp_done,
-		iotg->hsm.b_hnp_enable,
-		iotg->hsm.a_wait_vrise_tmout,
-		iotg->hsm.a_wait_bcon_tmout,
-		iotg->hsm.a_aidl_bdis_tmout,
-		iotg->hsm.b_ase0_brst_tmout,
-		iotg->hsm.a_bus_drop,
-		iotg->hsm.a_bus_req,
-		iotg->hsm.a_clr_err,
-		iotg->hsm.a_suspend_req,
-		iotg->hsm.b_bus_req,
-		iotg->hsm.b_bus_suspend_tmout,
-		iotg->hsm.b_bus_suspend_vld
-		);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	char			*next;
-	unsigned		size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_req);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-
-	if (!iotg->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		iotg->hsm.a_bus_req = 0;
-		dev_dbg(lnw->dev, "User request: a_bus_req = 0\n");
-	} else if (buf[0] == '1') {
-		/* If a_bus_drop is TRUE, a_bus_req can't be set */
-		if (iotg->hsm.a_bus_drop)
-			return -1;
-		iotg->hsm.a_bus_req = 1;
-		dev_dbg(lnw->dev, "User request: a_bus_req = 1\n");
-	}
-	if (spin_trylock(&lnw->wq_lock)) {
-		langwell_update_transceiver();
-		spin_unlock(&lnw->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
-
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	char			*next;
-	unsigned		size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_drop);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-
-	if (!iotg->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		iotg->hsm.a_bus_drop = 0;
-		dev_dbg(lnw->dev, "User request: a_bus_drop = 0\n");
-	} else if (buf[0] == '1') {
-		iotg->hsm.a_bus_drop = 1;
-		iotg->hsm.a_bus_req = 0;
-		dev_dbg(lnw->dev, "User request: a_bus_drop = 1\n");
-		dev_dbg(lnw->dev, "User request: and a_bus_req = 0\n");
-	}
-	if (spin_trylock(&lnw->wq_lock)) {
-		langwell_update_transceiver();
-		spin_unlock(&lnw->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
-
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	char			*next;
-	unsigned		size, t;
-
-	next = buf;
-	size = PAGE_SIZE;
-
-	t = scnprintf(next, size, "%d", lnw->iotg.hsm.b_bus_req);
-	size -= t;
-	next += t;
-
-	return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-
-	if (iotg->otg.default_a)
-		return -1;
-
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '0') {
-		iotg->hsm.b_bus_req = 0;
-		dev_dbg(lnw->dev, "User request: b_bus_req = 0\n");
-	} else if (buf[0] == '1') {
-		iotg->hsm.b_bus_req = 1;
-		dev_dbg(lnw->dev, "User request: b_bus_req = 1\n");
-	}
-	if (spin_trylock(&lnw->wq_lock)) {
-		langwell_update_transceiver();
-		spin_unlock(&lnw->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
-
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-
-	if (!iotg->otg.default_a)
-		return -1;
-	if (count > 2)
-		return -1;
-
-	if (buf[0] == '1') {
-		iotg->hsm.a_clr_err = 1;
-		dev_dbg(lnw->dev, "User request: a_clr_err = 1\n");
-	}
-	if (spin_trylock(&lnw->wq_lock)) {
-		langwell_update_transceiver();
-		spin_unlock(&lnw->wq_lock);
-	}
-	return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
-
-static struct attribute *inputs_attrs[] = {
-	&dev_attr_a_bus_req.attr,
-	&dev_attr_a_bus_drop.attr,
-	&dev_attr_b_bus_req.attr,
-	&dev_attr_a_clr_err.attr,
-	NULL,
-};
-
-static struct attribute_group debug_dev_attr_group = {
-	.name = "inputs",
-	.attrs = inputs_attrs,
-};
-
-static int langwell_otg_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	unsigned long		resource, len;
-	void __iomem		*base = NULL;
-	int			retval;
-	u32			val32;
-	struct langwell_otg	*lnw;
-	char			qname[] = "langwell_otg_queue";
-
-	retval = 0;
-	dev_dbg(&pdev->dev, "\notg controller is detected.\n");
-	if (pci_enable_device(pdev) < 0) {
-		retval = -ENODEV;
-		goto done;
-	}
-
-	lnw = kzalloc(sizeof *lnw, GFP_KERNEL);
-	if (lnw == NULL) {
-		retval = -ENOMEM;
-		goto done;
-	}
-	the_transceiver = lnw;
-
-	/* control register: BAR 0 */
-	resource = pci_resource_start(pdev, 0);
-	len = pci_resource_len(pdev, 0);
-	if (!request_mem_region(resource, len, driver_name)) {
-		retval = -EBUSY;
-		goto err;
-	}
-	lnw->region = 1;
-
-	base = ioremap_nocache(resource, len);
-	if (base == NULL) {
-		retval = -EFAULT;
-		goto err;
-	}
-	lnw->iotg.base = base;
-
-	if (!request_mem_region(USBCFG_ADDR, USBCFG_LEN, driver_name)) {
-		retval = -EBUSY;
-		goto err;
-	}
-	lnw->cfg_region = 1;
-
-	/* For the SCCB.USBCFG register */
-	base = ioremap_nocache(USBCFG_ADDR, USBCFG_LEN);
-	if (base == NULL) {
-		retval = -EFAULT;
-		goto err;
-	}
-	lnw->usbcfg = base;
-
-	if (!pdev->irq) {
-		dev_dbg(&pdev->dev, "No IRQ.\n");
-		retval = -ENODEV;
-		goto err;
-	}
-
-	lnw->qwork = create_singlethread_workqueue(qname);
-	if (!lnw->qwork) {
-		dev_dbg(&pdev->dev, "cannot create workqueue %s\n", qname);
-		retval = -ENOMEM;
-		goto err;
-	}
-	INIT_WORK(&lnw->work, langwell_otg_work);
-
-	/* OTG common part */
-	lnw->dev = &pdev->dev;
-	lnw->iotg.otg.dev = lnw->dev;
-	lnw->iotg.otg.label = driver_name;
-	lnw->iotg.otg.set_host = langwell_otg_set_host;
-	lnw->iotg.otg.set_peripheral = langwell_otg_set_peripheral;
-	lnw->iotg.otg.set_power = langwell_otg_set_power;
-	lnw->iotg.otg.set_vbus = langwell_otg_set_vbus;
-	lnw->iotg.otg.start_srp = langwell_otg_start_srp;
-	lnw->iotg.otg.state = OTG_STATE_UNDEFINED;
-
-	if (otg_set_transceiver(&lnw->iotg.otg)) {
-		dev_dbg(lnw->dev, "can't set transceiver\n");
-		retval = -EBUSY;
-		goto err;
-	}
-
-	reset_otg();
-	init_hsm();
-
-	spin_lock_init(&lnw->lock);
-	spin_lock_init(&lnw->wq_lock);
-	INIT_LIST_HEAD(&active_timers);
-	retval = langwell_otg_init_timers(&lnw->iotg.hsm);
-	if (retval) {
-		dev_dbg(&pdev->dev, "Failed to init timers\n");
-		goto err;
-	}
-
-	init_timer(&lnw->hsm_timer);
-	ATOMIC_INIT_NOTIFIER_HEAD(&lnw->iotg.iotg_notifier);
-
-	lnw->iotg_notifier.notifier_call = langwell_otg_iotg_notify;
-
-	retval = intel_mid_otg_register_notifier(&lnw->iotg,
-						&lnw->iotg_notifier);
-	if (retval) {
-		dev_dbg(lnw->dev, "Failed to register notifier\n");
-		goto err;
-	}
-
-	if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-				driver_name, lnw) != 0) {
-		dev_dbg(lnw->dev, "request interrupt %d failed\n", pdev->irq);
-		retval = -EBUSY;
-		goto err;
-	}
-
-	/* enable OTGSC int */
-	val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
-		OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
-	writel(val32, lnw->iotg.base + CI_OTGSC);
-
-	retval = device_create_file(&pdev->dev, &dev_attr_registers);
-	if (retval < 0) {
-		dev_dbg(lnw->dev,
-			"Can't register sysfs attribute: %d\n", retval);
-		goto err;
-	}
-
-	retval = device_create_file(&pdev->dev, &dev_attr_hsm);
-	if (retval < 0) {
-		dev_dbg(lnw->dev, "Can't hsm sysfs attribute: %d\n", retval);
-		goto err;
-	}
-
-	retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
-	if (retval < 0) {
-		dev_dbg(lnw->dev,
-			"Can't register sysfs attr group: %d\n", retval);
-		goto err;
-	}
-
-	if (lnw->iotg.otg.state == OTG_STATE_A_IDLE)
-		langwell_update_transceiver();
-
-	return 0;
-
-err:
-	if (the_transceiver)
-		langwell_otg_remove(pdev);
-done:
-	return retval;
-}
-
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
-	struct langwell_otg *lnw = the_transceiver;
-
-	if (lnw->qwork) {
-		flush_workqueue(lnw->qwork);
-		destroy_workqueue(lnw->qwork);
-	}
-	intel_mid_otg_unregister_notifier(&lnw->iotg, &lnw->iotg_notifier);
-	langwell_otg_free_timers();
-
-	/* disable OTGSC interrupt as OTGSC doesn't change in reset */
-	writel(0, lnw->iotg.base + CI_OTGSC);
-
-	if (pdev->irq)
-		free_irq(pdev->irq, lnw);
-	if (lnw->usbcfg)
-		iounmap(lnw->usbcfg);
-	if (lnw->cfg_region)
-		release_mem_region(USBCFG_ADDR, USBCFG_LEN);
-	if (lnw->iotg.base)
-		iounmap(lnw->iotg.base);
-	if (lnw->region)
-		release_mem_region(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
-
-	otg_set_transceiver(NULL);
-	pci_disable_device(pdev);
-	sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
-	device_remove_file(&pdev->dev, &dev_attr_hsm);
-	device_remove_file(&pdev->dev, &dev_attr_registers);
-	kfree(lnw);
-	lnw = NULL;
-}
-
-static void transceiver_suspend(struct pci_dev *pdev)
-{
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-	langwell_otg_phy_low_power(1);
-}
-
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
-	struct langwell_otg		*lnw = the_transceiver;
-	struct intel_mid_otg_xceiv	*iotg = &lnw->iotg;
-	int				ret = 0;
-
-	/* Disbale OTG interrupts */
-	langwell_otg_intr(0);
-
-	if (pdev->irq)
-		free_irq(pdev->irq, lnw);
-
-	/* Prevent more otg_work */
-	flush_workqueue(lnw->qwork);
-	destroy_workqueue(lnw->qwork);
-	lnw->qwork = NULL;
-
-	/* start actions */
-	switch (iotg->otg.state) {
-	case OTG_STATE_A_WAIT_VFALL:
-		iotg->otg.state = OTG_STATE_A_IDLE;
-	case OTG_STATE_A_IDLE:
-	case OTG_STATE_B_IDLE:
-	case OTG_STATE_A_VBUS_ERR:
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_WAIT_VRISE:
-		langwell_otg_del_timer(a_wait_vrise_tmr);
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_WAIT_BCON:
-		del_timer_sync(&lnw->hsm_timer);
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev, "host driver has been removed.\n");
-
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_HOST:
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev, "host driver has been removed.\n");
-
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_SUSPEND:
-		langwell_otg_del_timer(a_aidl_bdis_tmr);
-		langwell_otg_HABA(0);
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(lnw->dev, "host driver has been removed.\n");
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_A_PERIPHERAL:
-		del_timer_sync(&lnw->hsm_timer);
-
-		if (lnw->iotg.stop_peripheral)
-			lnw->iotg.stop_peripheral(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev,
-				"client driver has been removed.\n");
-		iotg->hsm.a_srp_det = 0;
-
-		/* Turn off VBus */
-		iotg->otg.set_vbus(&iotg->otg, false);
-		iotg->otg.state = OTG_STATE_A_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_B_HOST:
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev, "host driver has been removed.\n");
-		iotg->hsm.b_bus_req = 0;
-		iotg->otg.state = OTG_STATE_B_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		if (lnw->iotg.stop_peripheral)
-			lnw->iotg.stop_peripheral(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev,
-				"client driver has been removed.\n");
-		iotg->otg.state = OTG_STATE_B_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	case OTG_STATE_B_WAIT_ACON:
-		/* delete hsm timer for b_ase0_brst_tmr */
-		del_timer_sync(&lnw->hsm_timer);
-
-		langwell_otg_HAAR(0);
-
-		if (lnw->iotg.stop_host)
-			lnw->iotg.stop_host(&lnw->iotg);
-		else
-			dev_dbg(&pdev->dev, "host driver has been removed.\n");
-		iotg->hsm.b_bus_req = 0;
-		iotg->otg.state = OTG_STATE_B_IDLE;
-		transceiver_suspend(pdev);
-		break;
-	default:
-		dev_dbg(lnw->dev, "error state before suspend\n");
-		break;
-	}
-
-	return ret;
-}
-
-static void transceiver_resume(struct pci_dev *pdev)
-{
-	pci_restore_state(pdev);
-	pci_set_power_state(pdev, PCI_D0);
-}
-
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
-	struct langwell_otg	*lnw = the_transceiver;
-	int			ret = 0;
-
-	transceiver_resume(pdev);
-
-	lnw->qwork = create_singlethread_workqueue("langwell_otg_queue");
-	if (!lnw->qwork) {
-		dev_dbg(&pdev->dev, "cannot create langwell otg workqueuen");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-				driver_name, lnw) != 0) {
-		dev_dbg(&pdev->dev, "request interrupt %d failed\n", pdev->irq);
-		ret = -EBUSY;
-		goto error;
-	}
-
-	/* enable OTG interrupts */
-	langwell_otg_intr(1);
-
-	update_hsm();
-
-	langwell_update_transceiver();
-
-	return ret;
-error:
-	langwell_otg_intr(0);
-	transceiver_suspend(pdev);
-	return ret;
-}
-
-static int __init langwell_otg_init(void)
-{
-	return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-
-static void __exit langwell_otg_cleanup(void)
-{
-	pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index db0d4fc..b5fbe14 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -202,6 +202,7 @@
 
 static void mv_otg_start_host(struct mv_otg *mvotg, int on)
 {
+#ifdef CONFIG_USB
 	struct otg_transceiver *otg = &mvotg->otg;
 	struct usb_hcd *hcd;
 
@@ -216,6 +217,7 @@
 		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
 	else
 		usb_remove_hcd(hcd);
+#endif /* CONFIG_USB */
 }
 
 static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 528691d5f..7542aa9 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -425,7 +425,7 @@
 	struct usbhs_pipe *pipe;
 	int recip = ctrl->bRequestType & USB_RECIP_MASK;
 	int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
-	int ret;
+	int ret = 0;
 	int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
 		    struct usb_ctrlrequest *ctrl);
 	char *msg;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fba1147..8dbf51a 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -39,6 +39,8 @@
 	struct usb_serial_port *port);
 static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp);
+static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
+							struct ktermios *);
 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
 static int cp210x_tiocmget(struct tty_struct *);
@@ -138,6 +140,7 @@
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };
@@ -201,6 +204,8 @@
 #define CP210X_EMBED_EVENTS	0x15
 #define CP210X_GET_EVENTSTATE	0x16
 #define CP210X_SET_CHARS	0x19
+#define CP210X_GET_BAUDRATE	0x1D
+#define CP210X_SET_BAUDRATE	0x1E
 
 /* CP210X_IFC_ENABLE */
 #define UART_ENABLE		0x0001
@@ -360,8 +365,8 @@
  * Quantises the baud rate as per AN205 Table 1
  */
 static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
-	if      (baud <= 56)       baud = 0;
-	else if (baud <= 300)      baud = 300;
+	if (baud <= 300)
+		baud = 300;
 	else if (baud <= 600)      baud = 600;
 	else if (baud <= 1200)     baud = 1200;
 	else if (baud <= 1800)     baud = 1800;
@@ -389,10 +394,10 @@
 	else if (baud <= 491520)   baud = 460800;
 	else if (baud <= 567138)   baud = 500000;
 	else if (baud <= 670254)   baud = 576000;
-	else if (baud <= 1053257)  baud = 921600;
-	else if (baud <= 1474560)  baud = 1228800;
-	else if (baud <= 2457600)  baud = 1843200;
-	else                       baud = 3686400;
+	else if (baud < 1000000)
+		baud = 921600;
+	else if (baud > 2000000)
+		baud = 2000000;
 	return baud;
 }
 
@@ -409,13 +414,14 @@
 		return result;
 	}
 
-	result = usb_serial_generic_open(tty, port);
-	if (result)
-		return result;
-
 	/* Configure the termios structure */
 	cp210x_get_termios(tty, port);
-	return 0;
+
+	/* The baud rate must be initialised on cp2104 */
+	if (tty)
+		cp210x_change_speed(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
 }
 
 static void cp210x_close(struct usb_serial_port *port)
@@ -467,10 +473,7 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
-	/* Convert to baudrate */
-	if (baud)
-		baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+	cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
 
 	dbg("%s - baud rate = %d", __func__, baud);
 	*baudp = baud;
@@ -579,11 +582,64 @@
 	*cflagp = cflag;
 }
 
+/*
+ * CP2101 supports the following baud rates:
+ *
+ *	300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
+ *	38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
+ *
+ * CP2102 and CP2103 support the following additional rates:
+ *
+ *	4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
+ *	576000
+ *
+ * The device will map a requested rate to a supported one, but the result
+ * of requests for rates greater than 1053257 is undefined (see AN205).
+ *
+ * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
+ * respectively, with an error less than 1%. The actual rates are determined
+ * by
+ *
+ *	div = round(freq / (2 x prescale x request))
+ *	actual = freq / (2 x prescale x div)
+ *
+ * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
+ * or 1 otherwise.
+ * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
+ * otherwise.
+ */
+static void cp210x_change_speed(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
+{
+	u32 baud;
+
+	baud = tty->termios->c_ospeed;
+
+	/* This maps the requested rate to a rate valid on cp2102 or cp2103,
+	 * or to an arbitrary rate in [1M,2M].
+	 *
+	 * NOTE: B0 is not implemented.
+	 */
+	baud = cp210x_quantise_baudrate(baud);
+
+	dbg("%s - setting baud rate to %u", __func__, baud);
+	if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
+							sizeof(baud))) {
+		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
+		if (old_termios)
+			baud = old_termios->c_ospeed;
+		else
+			baud = 9600;
+	}
+
+	tty_encode_baud_rate(tty, baud, baud);
+}
+
 static void cp210x_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
-	unsigned int baud = 0, bits;
+	unsigned int bits;
 	unsigned int modem_ctl[4];
 
 	dbg("%s - port %d", __func__, port->number);
@@ -593,20 +649,9 @@
 
 	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
 
-	/* If the baud rate is to be updated*/
-	if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
-		dbg("%s - Setting baud rate to %d baud", __func__,
-				baud);
-		if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
-					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
-			dbg("Baud rate requested not supported by device");
-			baud = tty_termios_baud_rate(old_termios);
-		}
-	}
-	/* Report back the resulting baud rate */
-	tty_encode_baud_rate(tty, baud, baud);
+	if (tty->termios->c_ospeed != old_termios->c_ospeed)
+		cp210x_change_speed(tty, port, old_termios);
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 01b6404..ad654f8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -797,6 +797,7 @@
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -805,6 +806,8 @@
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -841,6 +844,7 @@
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -1333,8 +1337,7 @@
 		goto check_and_exit;
 	}
 
-	if ((new_serial.baud_base != priv->baud_base) &&
-	    (new_serial.baud_base < 9600)) {
+	if (new_serial.baud_base != priv->baud_base) {
 		mutex_unlock(&priv->cfg_lock);
 		return -EINVAL;
 	}
@@ -1824,6 +1827,7 @@
 
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
+	struct ktermios dummy;
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int result;
@@ -1842,8 +1846,10 @@
 	   This is same behaviour as serial.c/rs_open() - Kuba */
 
 	/* ftdi_set_termios  will send usb control messages */
-	if (tty)
-		ftdi_set_termios(tty, port, tty->termios);
+	if (tty) {
+		memset(&dummy, 0, sizeof(dummy));
+		ftdi_set_termios(tty, port, &dummy);
+	}
 
 	/* Start reading from the device */
 	result = usb_serial_generic_open(tty, port);
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index df1d7da..f994503 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -39,6 +39,13 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID		0xa6d0
+
 #define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
 
 /* US Interface Navigator (http://www.usinterface.com/) */
@@ -525,6 +532,12 @@
 #define ADI_GNICEPLUS_PID	0xF001
 
 /*
+ * Hornby Elite
+ */
+#define HORNBY_VID		0x04D8
+#define HORNBY_ELITE_PID	0x000A
+
+/*
  * RATOC REX-USB60F
  */
 #define RATOC_VENDOR_ID		0x0584
@@ -1168,3 +1181,9 @@
  */
 /* TagTracer MIFARE*/
 #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID	0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106		0x8A28
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 65bf06a..5818bfc 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2657,15 +2657,7 @@
 
 static void edge_disconnect(struct usb_serial *serial)
 {
-	int i;
-	struct edgeport_port *edge_port;
-
 	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = usb_get_serial_port_data(serial->port[i]);
-		edge_remove_sysfs_attrs(edge_port->port);
-	}
 }
 
 static void edge_release(struct usb_serial *serial)
@@ -2744,6 +2736,7 @@
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
+	.port_remove		= edge_remove_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -2775,6 +2768,7 @@
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
+	.port_remove		= edge_remove_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 5d3beee..a92a3ef 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -38,7 +38,7 @@
 #include <linux/ioctl.h>
 #include "kobil_sct.h"
 
-static int debug;
+static bool debug;
 
 /* Version Information */
 #define DRIVER_VERSION "21/05/2004"
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 420d985..ea126a4 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -480,6 +480,10 @@
 #define ZD_VENDOR_ID				0x0685
 #define ZD_PRODUCT_7000				0x7000
 
+/* LG products */
+#define LG_VENDOR_ID				0x1004
+#define LG_PRODUCT_L02C				0x618f
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -1183,6 +1187,7 @@
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 30b73e6..a348198 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,6 +36,7 @@
 #define UTSTARCOM_PRODUCT_UM175_V1		0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2		0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+#define PANTECH_PRODUCT_UML190_VZW		0x3716
 #define PANTECH_PRODUCT_UML290_VZW		0x3718
 
 /* CMOTECH devices */
@@ -67,7 +68,11 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) },  /* NMEA */
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) },  /* WMC */
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },  /* DIAG */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 1f62723..d32f720 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -789,7 +789,7 @@
 			rts51x_set_stat(chip, RTS51X_STAT_SS);
 			/* ignore mass storage interface's children */
 			pm_suspend_ignore_children(&us->pusb_intf->dev, true);
-			usb_autopm_put_interface(us->pusb_intf);
+			usb_autopm_put_interface_async(us->pusb_intf);
 			US_DEBUGP("%s: RTS51X_STAT_SS 01,"
 				"intf->pm_usage_cnt:%d, power.usage:%d\n",
 				__func__,
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 8efeae2..b4a7167 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -27,8 +27,6 @@
 #define USB_SKEL_VENDOR_ID	0xfff0
 #define USB_SKEL_PRODUCT_ID	0xfff0
 
-static DEFINE_MUTEX(skel_mutex);
-
 /* table of devices that work with this driver */
 static const struct usb_device_id skel_table[] = {
 	{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
@@ -101,25 +99,18 @@
 		goto exit;
 	}
 
-	mutex_lock(&skel_mutex);
 	dev = usb_get_intfdata(interface);
 	if (!dev) {
-		mutex_unlock(&skel_mutex);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	/* increment our usage count for the device */
 	kref_get(&dev->kref);
-	mutex_unlock(&skel_mutex);
 
 	/* lock the device to allow correctly handling errors
 	 * in resumption */
 	mutex_lock(&dev->io_mutex);
-	if (!dev->interface) {
-		retval = -ENODEV;
-		goto out_err;
-	}
 
 	retval = usb_autopm_get_interface(interface);
 	if (retval)
@@ -127,11 +118,7 @@
 
 	/* save our object in the file's private structure */
 	file->private_data = dev;
-
-out_err:
 	mutex_unlock(&dev->io_mutex);
-	if (retval)
-		kref_put(&dev->kref, skel_delete);
 
 exit:
 	return retval;
@@ -611,6 +598,7 @@
 	int minor = interface->minor;
 
 	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
 
 	/* give back our minor */
 	usb_deregister_dev(interface, &skel_class);
@@ -622,12 +610,8 @@
 
 	usb_kill_anchored_urbs(&dev->submitted);
 
-	mutex_lock(&skel_mutex);
-	usb_set_intfdata(interface, NULL);
-
 	/* decrement our usage count */
 	kref_put(&dev->kref, skel_delete);
-	mutex_unlock(&skel_mutex);
 
 	dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor);
 }
diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig
index 0ead882..f29fdd7 100644
--- a/drivers/usb/wusbcore/Kconfig
+++ b/drivers/usb/wusbcore/Kconfig
@@ -6,7 +6,7 @@
 	depends on EXPERIMENTAL
 	depends on USB
 	depends on PCI
-        select UWB
+	depends on UWB
         select CRYPTO
         select CRYPTO_BLKCIPHER
         select CRYPTO_CBC
diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c
index 43207cc..fe01add 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/macfb.c
@@ -592,12 +592,12 @@
 	if (!fb_info.screen_base)
 		return -ENODEV;
 
-	printk("macfb: framebuffer at 0x%08lx, mapped to 0x%p, size %dk\n",
-	       macfb_fix.smem_start, fb_info.screen_base,
-	       macfb_fix.smem_len / 1024);
-	printk("macfb: mode is %dx%dx%d, linelength=%d\n",
-	       macfb_defined.xres, macfb_defined.yres,
-	       macfb_defined.bits_per_pixel, macfb_fix.line_length);
+	pr_info("macfb: framebuffer at 0x%08lx, mapped to 0x%p, size %dk\n",
+	        macfb_fix.smem_start, fb_info.screen_base,
+	        macfb_fix.smem_len / 1024);
+	pr_info("macfb: mode is %dx%dx%d, linelength=%d\n",
+	        macfb_defined.xres, macfb_defined.yres,
+	        macfb_defined.bits_per_pixel, macfb_fix.line_length);
 
 	/* Fill in the available video resolution */
 	macfb_defined.xres_virtual = macfb_defined.xres;
@@ -613,14 +613,10 @@
 
 	switch (macfb_defined.bits_per_pixel) {
 	case 1:
-		/*
-		 * XXX: I think this will catch any program that tries
-		 * to do FBIO_PUTCMAP when the visual is monochrome.
-		 */
 		macfb_defined.red.length = macfb_defined.bits_per_pixel;
 		macfb_defined.green.length = macfb_defined.bits_per_pixel;
 		macfb_defined.blue.length = macfb_defined.bits_per_pixel;
-		video_cmap_len = 0;
+		video_cmap_len = 2;
 		macfb_fix.visual = FB_VISUAL_MONO01;
 		break;
 	case 2:
@@ -660,11 +656,10 @@
 		macfb_fix.visual = FB_VISUAL_TRUECOLOR;
 		break;
 	default:
-		video_cmap_len = 0;
-		macfb_fix.visual = FB_VISUAL_MONO01;
-		printk("macfb: unknown or unsupported bit depth: %d\n",
+		pr_err("macfb: unknown or unsupported bit depth: %d\n",
 		       macfb_defined.bits_per_pixel);
-		break;
+		err = -EINVAL;
+		goto fail_unmap;
 	}
 	
 	/*
@@ -734,8 +729,8 @@
 		case MAC_MODEL_Q950:
 			strcpy(macfb_fix.id, "DAFB");
 			macfb_setpalette = dafb_setpalette;
-			macfb_defined.activate = FB_ACTIVATE_NOW;
 			dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000);
+			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 
 		/*
@@ -744,8 +739,8 @@
 		case MAC_MODEL_LCII:
 			strcpy(macfb_fix.id, "V8");
 			macfb_setpalette = v8_brazil_setpalette;
-			macfb_defined.activate = FB_ACTIVATE_NOW;
 			v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
+			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 
 		/*
@@ -758,8 +753,8 @@
 		case MAC_MODEL_P600:
 			strcpy(macfb_fix.id, "Brazil");
 			macfb_setpalette = v8_brazil_setpalette;
-			macfb_defined.activate = FB_ACTIVATE_NOW;
 			v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
+			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 
 		/*
@@ -773,10 +768,10 @@
 		case MAC_MODEL_P520:
 		case MAC_MODEL_P550:
 		case MAC_MODEL_P460:
-			macfb_setpalette = v8_brazil_setpalette;
-			macfb_defined.activate = FB_ACTIVATE_NOW;
 			strcpy(macfb_fix.id, "Sonora");
+			macfb_setpalette = v8_brazil_setpalette;
 			v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
+			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 
 		/*
@@ -786,10 +781,10 @@
 		 */
 		case MAC_MODEL_IICI:
 		case MAC_MODEL_IISI:
-			macfb_setpalette = rbv_setpalette;
-			macfb_defined.activate = FB_ACTIVATE_NOW;
 			strcpy(macfb_fix.id, "RBV");
+			macfb_setpalette = rbv_setpalette;
 			rbv_cmap_regs = ioremap(DAC_BASE, 0x1000);
+			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 
 		/*
@@ -797,10 +792,10 @@
 		 */
 		case MAC_MODEL_Q840:
 		case MAC_MODEL_C660:
-			macfb_setpalette = civic_setpalette;
-			macfb_defined.activate = FB_ACTIVATE_NOW;
 			strcpy(macfb_fix.id, "Civic");
+			macfb_setpalette = civic_setpalette;
 			civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000);
+			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 
 		
@@ -809,26 +804,26 @@
 		 * We think this may be like the LC II
 		 */
 		case MAC_MODEL_LC:
+			strcpy(macfb_fix.id, "LC");
 			if (vidtest) {
 				macfb_setpalette = v8_brazil_setpalette;
-				macfb_defined.activate = FB_ACTIVATE_NOW;
 				v8_brazil_cmap_regs =
 					ioremap(DAC_BASE, 0x1000);
+				macfb_defined.activate = FB_ACTIVATE_NOW;
 			}
-			strcpy(macfb_fix.id, "LC");
 			break;
 
 		/*
 		 * We think this may be like the LC II
 		 */
 		case MAC_MODEL_CCL:
+			strcpy(macfb_fix.id, "Color Classic");
 			if (vidtest) {
 				macfb_setpalette = v8_brazil_setpalette;
-				macfb_defined.activate = FB_ACTIVATE_NOW;
 				v8_brazil_cmap_regs =
 					ioremap(DAC_BASE, 0x1000);
+				macfb_defined.activate = FB_ACTIVATE_NOW;
 			}
-			strcpy(macfb_fix.id, "Color Classic");
 			break;
 
 		/*
@@ -893,10 +888,10 @@
 		case MAC_MODEL_PB270C:
 		case MAC_MODEL_PB280:
 		case MAC_MODEL_PB280C:
-			macfb_setpalette = csc_setpalette;
-			macfb_defined.activate = FB_ACTIVATE_NOW;
 			strcpy(macfb_fix.id, "CSC");
+			macfb_setpalette = csc_setpalette;
 			csc_cmap_regs = ioremap(CSC_BASE, 0x1000);
+			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 
 		default:
@@ -918,8 +913,9 @@
 	if (err)
 		goto fail_dealloc;
 
-	printk("fb%d: %s frame buffer device\n",
-	       fb_info.node, fb_info.fix.id);
+	pr_info("fb%d: %s frame buffer device\n",
+	        fb_info.node, fb_info.fix.id);
+
 	return 0;
 
 fail_dealloc:
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 79e1b29..5aa43c3 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -35,7 +35,7 @@
 #define virtio_rmb(vq) \
 	do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
 #define virtio_wmb(vq) \
-	do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
+	do { if ((vq)->weak_barriers) smp_wmb(); else wmb(); } while(0)
 #else
 /* We must force memory ordering even if guest is UP since host could be
  * running on another CPU, but SMP barriers are defined to barrier() in that
@@ -308,9 +308,9 @@
 	bool needs_kick;
 
 	START_USE(vq);
-	/* Descriptors and available array need to be set before we expose the
-	 * new available array entries. */
-	virtio_wmb(vq);
+	/* We need to expose available array entries before checking avail
+	 * event. */
+	virtio_mb(vq);
 
 	old = vq->vring.avail->idx - vq->num_added;
 	new = vq->vring.avail->idx;
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index 1b0e3dd..63d7b58 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -300,11 +300,7 @@
 	if (!mem)
 		return -EINVAL;
 
-	if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
-				     "dw_wdt"))
-		return -ENOMEM;
-
-	dw_wdt.regs = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
+	dw_wdt.regs = devm_request_and_ioremap(&pdev->dev, mem);
 	if (!dw_wdt.regs)
 		return -ENOMEM;
 
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 99796c5..bdf401b 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -36,6 +36,7 @@
  *	document number TBD                   : Patsburg (PBG)
  *	document number TBD                   : DH89xxCC
  *	document number TBD                   : Panther Point
+ *	document number TBD                   : Lynx Point
  */
 
 /*
@@ -126,6 +127,7 @@
 	TCO_PBG,	/* Patsburg */
 	TCO_DH89XXCC,	/* DH89xxCC */
 	TCO_PPT,	/* Panther Point */
+	TCO_LPT,	/* Lynx Point */
 };
 
 static struct {
@@ -189,6 +191,7 @@
 	{"Patsburg", 2},
 	{"DH89xxCC", 2},
 	{"Panther Point", 2},
+	{"Lynx Point", 2},
 	{NULL, 0}
 };
 
@@ -331,6 +334,38 @@
 	{ PCI_VDEVICE(INTEL, 0x1e5d), TCO_PPT},
 	{ PCI_VDEVICE(INTEL, 0x1e5e), TCO_PPT},
 	{ PCI_VDEVICE(INTEL, 0x1e5f), TCO_PPT},
+	{ PCI_VDEVICE(INTEL, 0x8c40), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c41), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c42), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c43), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c44), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c45), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c46), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c47), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c48), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c49), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c4a), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c4b), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c4c), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c4d), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c4e), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c4f), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c50), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c51), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c52), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c53), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c54), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c55), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c56), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c57), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c58), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c59), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c5a), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c5b), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c5c), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c5d), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c5e), TCO_LPT},
+	{ PCI_VDEVICE(INTEL, 0x8c5f), TCO_LPT},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index b8ef2c6..c44c333 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -247,7 +247,6 @@
 static int __init imx2_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
-	int res_size;
 	struct resource *res;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -256,15 +255,7 @@
 		return -ENODEV;
 	}
 
-	res_size = resource_size(res);
-	if (!devm_request_mem_region(&pdev->dev, res->start, res_size,
-		res->name)) {
-		dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n",
-			res_size, res->start);
-		return -ENOMEM;
-	}
-
-	imx2_wdt.base = devm_ioremap_nocache(&pdev->dev, res->start, res_size);
+	imx2_wdt.base = devm_request_and_ioremap(&pdev->dev, res);
 	if (!imx2_wdt.base) {
 		dev_err(&pdev->dev, "ioremap failed\n");
 		return -ENOMEM;
diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c
index 50359ba..529085b 100644
--- a/drivers/watchdog/nuc900_wdt.c
+++ b/drivers/watchdog/nuc900_wdt.c
@@ -72,7 +72,7 @@
 };
 
 static unsigned long nuc900wdt_busy;
-struct nuc900_wdt *nuc900_wdt;
+static struct nuc900_wdt *nuc900_wdt;
 
 static inline void nuc900_wdt_keepalive(void)
 {
@@ -287,7 +287,8 @@
 
 	setup_timer(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0);
 
-	if (misc_register(&nuc900wdt_miscdev)) {
+	ret = misc_register(&nuc900wdt_miscdev);
+	if (ret) {
 		dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n",
 			WATCHDOG_MINOR, ret);
 		goto err_clk;
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 4b33e3f..d19ff51 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -339,6 +339,7 @@
 	return 0;
 
 err_misc:
+	pm_runtime_disable(wdev->dev);
 	platform_set_drvdata(pdev, NULL);
 	iounmap(wdev->base);
 
@@ -371,6 +372,7 @@
 	struct omap_wdt_dev *wdev = platform_get_drvdata(pdev);
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
+	pm_runtime_disable(wdev->dev);
 	if (!res)
 		return -ENOENT;
 
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index bd143c9..8e210aa 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -226,7 +226,7 @@
 static int pnx4008_wdt_release(struct inode *inode, struct file *file)
 {
 	if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status))
-		printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n");
+		printk(KERN_WARNING "WATCHDOG: Device closed unexpectedly\n");
 
 	wdt_disable();
 	clk_disable(wdt_clk);
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
index 4c2a4e8..e37d811 100644
--- a/drivers/watchdog/stmp3xxx_wdt.c
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -174,7 +174,7 @@
 	if (!nowayout) {
 		if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
 			wdt_ping();
-			pr_debug("%s: Device closed unexpectdly\n", __func__);
+			pr_debug("%s: Device closed unexpectedly\n", __func__);
 			ret = -EINVAL;
 		} else {
 			wdt_disable();
diff --git a/drivers/watchdog/via_wdt.c b/drivers/watchdog/via_wdt.c
index 026b4bb..8f07dd4 100644
--- a/drivers/watchdog/via_wdt.c
+++ b/drivers/watchdog/via_wdt.c
@@ -124,8 +124,6 @@
 static int wdt_set_timeout(struct watchdog_device *wdd,
 			   unsigned int new_timeout)
 {
-	if (new_timeout < 1 || new_timeout > WDT_TIMEOUT_MAX)
-		return -EINVAL;
 	writel(new_timeout, wdt_mem + VIA_WDT_COUNT);
 	timeout = new_timeout;
 	return 0;
@@ -150,6 +148,8 @@
 static struct watchdog_device wdt_dev = {
 	.info =		&wdt_info,
 	.ops =		&wdt_ops,
+	.min_timeout =	1,
+	.max_timeout =	WDT_TIMEOUT_MAX,
 };
 
 static int __devinit wdt_probe(struct pci_dev *pdev,
@@ -233,7 +233,7 @@
 	pci_disable_device(pdev);
 }
 
-DEFINE_PCI_DEVICE_TABLE(wdt_pci_table) = {
+static DEFINE_PCI_DEVICE_TABLE(wdt_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855) },
diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c
index 42e940c..c3c3188 100644
--- a/drivers/watchdog/wafer5823wdt.c
+++ b/drivers/watchdog/wafer5823wdt.c
@@ -152,12 +152,12 @@
 			return -EFAULT;
 
 		if (options & WDIOS_DISABLECARD) {
-			wafwdt_start();
+			wafwdt_stop();
 			retval = 0;
 		}
 
 		if (options & WDIOS_ENABLECARD) {
-			wafwdt_stop();
+			wafwdt_start();
 			retval = 0;
 		}
 
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index 909c786..5d7113c 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -212,10 +212,10 @@
 
 		/* Setting both simultaneously means at least one must fail */
 		if (options == WDIOS_DISABLECARD)
-			ret = wm8350_wdt_start(wm8350);
+			ret = wm8350_wdt_stop(wm8350);
 
 		if (options == WDIOS_ENABLECARD)
-			ret = wm8350_wdt_stop(wm8350);
+			ret = wm8350_wdt_start(wm8350);
 		break;
 	}
 
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 1cd94da..b4d4eac 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -948,9 +948,12 @@
 	int rc;
 	struct gnttab_set_version gsv;
 
-	gsv.version = 2;
+	if (xen_hvm_domain())
+		gsv.version = 1;
+	else
+		gsv.version = 2;
 	rc = HYPERVISOR_grant_table_op(GNTTABOP_set_version, &gsv, 1);
-	if (rc == 0) {
+	if (rc == 0 && gsv.version == 2) {
 		grant_table_version = 2;
 		gnttab_interface = &gnttab_v2_ops;
 	} else if (grant_table_version == 2) {
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index b9a8432..633c701 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -297,7 +297,7 @@
 	struct btrfs_delayed_extent_op *extent_op = head->extent_op;
 	struct rb_node *n = &head->node.rb_node;
 	int sgn;
-	int ret;
+	int ret = 0;
 
 	if (extent_op && extent_op->update_key)
 		btrfs_disk_key_to_cpu(info_key, &extent_op->key);
@@ -392,7 +392,7 @@
 			     struct btrfs_key *info_key, int *info_level,
 			     struct list_head *prefs)
 {
-	int ret;
+	int ret = 0;
 	int slot;
 	struct extent_buffer *leaf;
 	struct btrfs_key key;
diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c
index ad0b3ba..b669a7d 100644
--- a/fs/btrfs/check-integrity.c
+++ b/fs/btrfs/check-integrity.c
@@ -1662,7 +1662,7 @@
 	block = btrfsic_block_hashtable_lookup(bdev, dev_bytenr,
 					       &state->block_hashtable);
 	if (NULL != block) {
-		u64 bytenr;
+		u64 bytenr = 0;
 		struct list_head *elem_ref_to;
 		struct list_head *tmp_ref_to;
 
@@ -2777,9 +2777,10 @@
 			printk(KERN_INFO
 			       "submit_bh(rw=0x%x, blocknr=%lu (bytenr %llu),"
 			       " size=%lu, data=%p, bdev=%p)\n",
-			       rw, bh->b_blocknr,
-			       (unsigned long long)dev_bytenr, bh->b_size,
-			       bh->b_data, bh->b_bdev);
+			       rw, (unsigned long)bh->b_blocknr,
+			       (unsigned long long)dev_bytenr,
+			       (unsigned long)bh->b_size, bh->b_data,
+			       bh->b_bdev);
 		btrfsic_process_written_block(dev_state, dev_bytenr,
 					      bh->b_data, bh->b_size, NULL,
 					      NULL, bh, rw);
@@ -2844,7 +2845,7 @@
 			printk(KERN_INFO
 			       "submit_bio(rw=0x%x, bi_vcnt=%u,"
 			       " bi_sector=%lu (bytenr %llu), bi_bdev=%p)\n",
-			       rw, bio->bi_vcnt, bio->bi_sector,
+			       rw, bio->bi_vcnt, (unsigned long)bio->bi_sector,
 			       (unsigned long long)dev_bytenr,
 			       bio->bi_bdev);
 
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 7aa9cd3..811d9f9 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -962,6 +962,13 @@
 	tree = &BTRFS_I(page->mapping->host)->io_tree;
 	map = &BTRFS_I(page->mapping->host)->extent_tree;
 
+	/*
+	 * We need to mask out eg. __GFP_HIGHMEM and __GFP_DMA32 as we're doing
+	 * slab allocation from alloc_extent_state down the callchain where
+	 * it'd hit a BUG_ON as those flags are not allowed.
+	 */
+	gfp_flags &= ~GFP_SLAB_BUG_MASK;
+
 	ret = try_release_extent_state(map, tree, page, gfp_flags);
 	if (!ret)
 		return 0;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 700879e..283af7a 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -34,23 +34,24 @@
 #include "locking.h"
 #include "free-space-cache.h"
 
-/* control flags for do_chunk_alloc's force field
+/*
+ * control flags for do_chunk_alloc's force field
  * CHUNK_ALLOC_NO_FORCE means to only allocate a chunk
  * if we really need one.
  *
- * CHUNK_ALLOC_FORCE means it must try to allocate one
- *
  * CHUNK_ALLOC_LIMITED means to only try and allocate one
  * if we have very few chunks already allocated.  This is
  * used as part of the clustering code to help make sure
  * we have a good pool of storage to cluster in, without
  * filling the FS with empty chunks
  *
+ * CHUNK_ALLOC_FORCE means it must try to allocate one
+ *
  */
 enum {
 	CHUNK_ALLOC_NO_FORCE = 0,
-	CHUNK_ALLOC_FORCE = 1,
-	CHUNK_ALLOC_LIMITED = 2,
+	CHUNK_ALLOC_LIMITED = 1,
+	CHUNK_ALLOC_FORCE = 2,
 };
 
 /*
@@ -3414,7 +3415,7 @@
 
 again:
 	spin_lock(&space_info->lock);
-	if (space_info->force_alloc)
+	if (force < space_info->force_alloc)
 		force = space_info->force_alloc;
 	if (space_info->full) {
 		spin_unlock(&space_info->lock);
@@ -5794,6 +5795,7 @@
 			 u64 search_end, struct btrfs_key *ins,
 			 u64 data)
 {
+	bool final_tried = false;
 	int ret;
 	u64 search_start = 0;
 
@@ -5813,22 +5815,25 @@
 			       search_start, search_end, hint_byte,
 			       ins, data);
 
-	if (ret == -ENOSPC && num_bytes > min_alloc_size) {
-		num_bytes = num_bytes >> 1;
-		num_bytes = num_bytes & ~(root->sectorsize - 1);
-		num_bytes = max(num_bytes, min_alloc_size);
-		do_chunk_alloc(trans, root->fs_info->extent_root,
-			       num_bytes, data, CHUNK_ALLOC_FORCE);
-		goto again;
-	}
-	if (ret == -ENOSPC && btrfs_test_opt(root, ENOSPC_DEBUG)) {
-		struct btrfs_space_info *sinfo;
+	if (ret == -ENOSPC) {
+		if (!final_tried) {
+			num_bytes = num_bytes >> 1;
+			num_bytes = num_bytes & ~(root->sectorsize - 1);
+			num_bytes = max(num_bytes, min_alloc_size);
+			do_chunk_alloc(trans, root->fs_info->extent_root,
+				       num_bytes, data, CHUNK_ALLOC_FORCE);
+			if (num_bytes == min_alloc_size)
+				final_tried = true;
+			goto again;
+		} else if (btrfs_test_opt(root, ENOSPC_DEBUG)) {
+			struct btrfs_space_info *sinfo;
 
-		sinfo = __find_space_info(root->fs_info, data);
-		printk(KERN_ERR "btrfs allocation failed flags %llu, "
-		       "wanted %llu\n", (unsigned long long)data,
-		       (unsigned long long)num_bytes);
-		dump_space_info(sinfo, num_bytes, 1);
+			sinfo = __find_space_info(root->fs_info, data);
+			printk(KERN_ERR "btrfs allocation failed flags %llu, "
+			       "wanted %llu\n", (unsigned long long)data,
+			       (unsigned long long)num_bytes);
+			dump_space_info(sinfo, num_bytes, 1);
+		}
 	}
 
 	trace_btrfs_reserved_extent_alloc(root, ins->objectid, ins->offset);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 9d09a4f..fcf77e1 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3909,6 +3909,8 @@
 	while (start <= end) {
 		index = start >> PAGE_CACHE_SHIFT;
 		page = find_get_page(tree->mapping, index);
+		if (!page)
+			return 1;
 		uptodate = PageUptodate(page);
 		page_cache_release(page);
 		if (!uptodate) {
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index d20ff87..c2f2059 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -2242,7 +2242,7 @@
 		if (entry->bitmap) {
 			ret = btrfs_alloc_from_bitmap(block_group,
 						      cluster, entry, bytes,
-						      min_start);
+						      cluster->window_start);
 			if (ret == 0) {
 				node = rb_next(&entry->offset_index);
 				if (!node)
@@ -2251,6 +2251,7 @@
 						 offset_index);
 				continue;
 			}
+			cluster->window_start += bytes;
 		} else {
 			ret = entry->offset;
 
@@ -2475,7 +2476,7 @@
 	}
 
 	list_for_each_entry(entry, bitmaps, list) {
-		if (entry->bytes < min_bytes)
+		if (entry->bytes < bytes)
 			continue;
 		ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset,
 					   bytes, cont1_bytes, min_bytes);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 0da19a0..32214fe 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6401,18 +6401,23 @@
 	unsigned long zero_start;
 	loff_t size;
 	int ret;
+	int reserved = 0;
 	u64 page_start;
 	u64 page_end;
 
 	ret  = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
-	if (!ret)
+	if (!ret) {
 		ret = btrfs_update_time(vma->vm_file);
+		reserved = 1;
+	}
 	if (ret) {
 		if (ret == -ENOMEM)
 			ret = VM_FAULT_OOM;
 		else /* -ENOSPC, -EIO, etc */
 			ret = VM_FAULT_SIGBUS;
-		goto out;
+		if (reserved)
+			goto out;
+		goto out_noreserve;
 	}
 
 	ret = VM_FAULT_NOPAGE; /* make the VM retry the fault */
@@ -6495,6 +6500,7 @@
 	unlock_page(page);
 out:
 	btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE);
+out_noreserve:
 	return ret;
 }
 
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index ab62001..03bb62a 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1065,7 +1065,7 @@
 		i = range->start >> PAGE_CACHE_SHIFT;
 	}
 	if (!max_to_defrag)
-		max_to_defrag = last_index;
+		max_to_defrag = last_index + 1;
 
 	/*
 	 * make writeback starts from i, so the defrag range can be
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index cb877e0..966cc74 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1957,7 +1957,8 @@
 
 		finish_wait(&root->log_commit_wait[index], &wait);
 		mutex_lock(&root->log_mutex);
-	} while (root->log_transid < transid + 2 &&
+	} while (root->fs_info->last_trans_log_full_commit !=
+		 trans->transid && root->log_transid < transid + 2 &&
 		 atomic_read(&root->log_commit[index]));
 	return 0;
 }
@@ -1966,7 +1967,8 @@
 			   struct btrfs_root *root)
 {
 	DEFINE_WAIT(wait);
-	while (atomic_read(&root->log_writers)) {
+	while (root->fs_info->last_trans_log_full_commit !=
+	       trans->transid && atomic_read(&root->log_writers)) {
 		prepare_to_wait(&root->log_writer_wait,
 				&wait, TASK_UNINTERRUPTIBLE);
 		mutex_unlock(&root->log_mutex);
diff --git a/fs/logfs/dev_mtd.c b/fs/logfs/dev_mtd.c
index e97404d..9c50144 100644
--- a/fs/logfs/dev_mtd.c
+++ b/fs/logfs/dev_mtd.c
@@ -152,9 +152,6 @@
 	filler_t *filler = logfs_mtd_readpage;
 	struct mtd_info *mtd = super->s_mtd;
 
-	if (!mtd_can_have_bb(mtd))
-		return NULL;
-
 	*ofs = 0;
 	while (mtd_block_isbad(mtd, *ofs)) {
 		*ofs += mtd->erasesize;
@@ -172,9 +169,6 @@
 	filler_t *filler = logfs_mtd_readpage;
 	struct mtd_info *mtd = super->s_mtd;
 
-	if (!mtd_can_have_bb(mtd))
-		return NULL;
-
 	*ofs = mtd->size - mtd->erasesize;
 	while (mtd_block_isbad(mtd, *ofs)) {
 		*ofs -= mtd->erasesize;
diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c
index 501043e..3de7a32 100644
--- a/fs/logfs/dir.c
+++ b/fs/logfs/dir.c
@@ -71,7 +71,7 @@
 
 static int write_inode(struct inode *inode)
 {
-	return __logfs_write_inode(inode, WF_LOCK);
+	return __logfs_write_inode(inode, NULL, WF_LOCK);
 }
 
 static s64 dir_seek_data(struct inode *inode, s64 pos)
diff --git a/fs/logfs/file.c b/fs/logfs/file.c
index b548c87..3886cde 100644
--- a/fs/logfs/file.c
+++ b/fs/logfs/file.c
@@ -230,7 +230,9 @@
 		return ret;
 
 	mutex_lock(&inode->i_mutex);
+	logfs_get_wblocks(sb, NULL, WF_LOCK);
 	logfs_write_anchor(sb);
+	logfs_put_wblocks(sb, NULL, WF_LOCK);
 	mutex_unlock(&inode->i_mutex);
 
 	return 0;
diff --git a/fs/logfs/gc.c b/fs/logfs/gc.c
index caa4419..d4efb06 100644
--- a/fs/logfs/gc.c
+++ b/fs/logfs/gc.c
@@ -367,7 +367,7 @@
 	int i, max_dist;
 	struct gc_candidate *cand = NULL, *this;
 
-	max_dist = min(no_free_segments(sb), LOGFS_NO_AREAS);
+	max_dist = min(no_free_segments(sb), LOGFS_NO_AREAS - 1);
 
 	for (i = max_dist; i >= 0; i--) {
 		this = first_in_list(&super->s_low_list[i]);
diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c
index 388df1a..a422f42 100644
--- a/fs/logfs/inode.c
+++ b/fs/logfs/inode.c
@@ -286,7 +286,7 @@
 	if (logfs_inode(inode)->li_flags & LOGFS_IF_STILLBORN)
 		return 0;
 
-	ret = __logfs_write_inode(inode, flags);
+	ret = __logfs_write_inode(inode, NULL, flags);
 	LOGFS_BUG_ON(ret, inode->i_sb);
 	return ret;
 }
@@ -363,7 +363,9 @@
 
 static int logfs_sync_fs(struct super_block *sb, int wait)
 {
+	logfs_get_wblocks(sb, NULL, WF_LOCK);
 	logfs_write_anchor(sb);
+	logfs_put_wblocks(sb, NULL, WF_LOCK);
 	return 0;
 }
 
diff --git a/fs/logfs/journal.c b/fs/logfs/journal.c
index 9da2970..1e1c369 100644
--- a/fs/logfs/journal.c
+++ b/fs/logfs/journal.c
@@ -612,7 +612,6 @@
 	if (len == 0)
 		return logfs_write_header(super, header, 0, type);
 
-	BUG_ON(len > sb->s_blocksize);
 	compr_len = logfs_compress(buf, data, len, sb->s_blocksize);
 	if (compr_len < 0 || type == JE_ANCHOR) {
 		memcpy(data, buf, len);
diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h
index 9263738..5f09376 100644
--- a/fs/logfs/logfs.h
+++ b/fs/logfs/logfs.h
@@ -528,7 +528,7 @@
 void logfs_set_blocks(struct inode *inode, u64 no);
 /* these logically belong into inode.c but actually reside in readwrite.c */
 int logfs_read_inode(struct inode *inode);
-int __logfs_write_inode(struct inode *inode, long flags);
+int __logfs_write_inode(struct inode *inode, struct page *, long flags);
 void logfs_evict_inode(struct inode *inode);
 
 /* journal.c */
@@ -577,6 +577,8 @@
 		__be64 *array, int page_is_empty);
 int logfs_exist_block(struct inode *inode, u64 bix);
 int get_page_reserve(struct inode *inode, struct page *page);
+void logfs_get_wblocks(struct super_block *sb, struct page *page, int lock);
+void logfs_put_wblocks(struct super_block *sb, struct page *page, int lock);
 extern struct logfs_block_ops indirect_block_ops;
 
 /* segment.c */
@@ -594,6 +596,7 @@
 void logfs_sync_area(struct logfs_area *area);
 void logfs_sync_segments(struct super_block *sb);
 void freeseg(struct super_block *sb, u32 segno);
+void free_areas(struct super_block *sb);
 
 /* area handling */
 int logfs_init_areas(struct super_block *sb);
diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c
index 2ac4217..4153e65 100644
--- a/fs/logfs/readwrite.c
+++ b/fs/logfs/readwrite.c
@@ -244,8 +244,7 @@
  * is waiting for s_write_mutex.  We annotate this fact by setting PG_pre_locked
  * in addition to PG_locked.
  */
-static void logfs_get_wblocks(struct super_block *sb, struct page *page,
-		int lock)
+void logfs_get_wblocks(struct super_block *sb, struct page *page, int lock)
 {
 	struct logfs_super *super = logfs_super(sb);
 
@@ -260,8 +259,7 @@
 	}
 }
 
-static void logfs_put_wblocks(struct super_block *sb, struct page *page,
-		int lock)
+void logfs_put_wblocks(struct super_block *sb, struct page *page, int lock)
 {
 	struct logfs_super *super = logfs_super(sb);
 
@@ -424,7 +422,7 @@
 	if (inode->i_ino == LOGFS_INO_MASTER)
 		logfs_write_anchor(inode->i_sb);
 	else {
-		ret = __logfs_write_inode(inode, 0);
+		ret = __logfs_write_inode(inode, NULL, 0);
 		/* see indirect_write_block comment */
 		BUG_ON(ret);
 	}
@@ -560,8 +558,13 @@
 static void indirect_free_block(struct super_block *sb,
 		struct logfs_block *block)
 {
-	ClearPagePrivate(block->page);
-	block->page->private = 0;
+	struct page *page = block->page;
+
+	if (PagePrivate(page)) {
+		ClearPagePrivate(page);
+		page_cache_release(page);
+		set_page_private(page, 0);
+	}
 	__free_block(sb, block);
 }
 
@@ -650,8 +653,11 @@
 	logfs_unpack_index(page->index, &bix, &level);
 	block = __alloc_block(inode->i_sb, inode->i_ino, bix, level);
 	block->page = page;
+
 	SetPagePrivate(page);
-	page->private = (unsigned long)block;
+	page_cache_get(page);
+	set_page_private(page, (unsigned long) block);
+
 	block->ops = &indirect_block_ops;
 }
 
@@ -1570,11 +1576,15 @@
 static int __logfs_delete(struct inode *inode, struct page *page)
 {
 	long flags = WF_DELETE;
+	int err;
 
 	inode->i_ctime = inode->i_mtime = CURRENT_TIME;
 
 	if (page->index < I0_BLOCKS)
 		return logfs_write_direct(inode, page, flags);
+	err = grow_inode(inode, page->index, 0);
+	if (err)
+		return err;
 	return logfs_write_rec(inode, page, page->index, 0, flags);
 }
 
@@ -1623,7 +1633,7 @@
 			if (inode->i_ino == LOGFS_INO_MASTER)
 				logfs_write_anchor(inode->i_sb);
 			else {
-				err = __logfs_write_inode(inode, flags);
+				err = __logfs_write_inode(inode, page, flags);
 			}
 		}
 	}
@@ -1873,7 +1883,7 @@
 		logfs_get_wblocks(sb, NULL, 1);
 		err = __logfs_truncate(inode, size);
 		if (!err)
-			err = __logfs_write_inode(inode, 0);
+			err = __logfs_write_inode(inode, NULL, 0);
 		logfs_put_wblocks(sb, NULL, 1);
 	}
 
@@ -1901,8 +1911,11 @@
 	li->li_block = block;
 
 	block->page = NULL;
-	page->private = 0;
-	ClearPagePrivate(page);
+	if (PagePrivate(page)) {
+		ClearPagePrivate(page);
+		page_cache_release(page);
+		set_page_private(page, 0);
+	}
 }
 
 static void move_inode_to_page(struct page *page, struct inode *inode)
@@ -1918,8 +1931,12 @@
 	BUG_ON(PagePrivate(page));
 	block->ops = &indirect_block_ops;
 	block->page = page;
-	page->private = (unsigned long)block;
-	SetPagePrivate(page);
+
+	if (!PagePrivate(page)) {
+		SetPagePrivate(page);
+		page_cache_get(page);
+		set_page_private(page, (unsigned long) block);
+	}
 
 	block->inode = NULL;
 	li->li_block = NULL;
@@ -2106,14 +2123,14 @@
 			ec_level);
 }
 
-int __logfs_write_inode(struct inode *inode, long flags)
+int __logfs_write_inode(struct inode *inode, struct page *page, long flags)
 {
 	struct super_block *sb = inode->i_sb;
 	int ret;
 
-	logfs_get_wblocks(sb, NULL, flags & WF_LOCK);
+	logfs_get_wblocks(sb, page, flags & WF_LOCK);
 	ret = do_write_inode(inode);
-	logfs_put_wblocks(sb, NULL, flags & WF_LOCK);
+	logfs_put_wblocks(sb, page, flags & WF_LOCK);
 	return ret;
 }
 
diff --git a/fs/logfs/segment.c b/fs/logfs/segment.c
index 9d51873..ab798ed 100644
--- a/fs/logfs/segment.c
+++ b/fs/logfs/segment.c
@@ -86,7 +86,11 @@
 		BUG_ON(!page); /* FIXME: reserve a pool */
 		SetPageUptodate(page);
 		memcpy(page_address(page) + offset, buf, copylen);
-		SetPagePrivate(page);
+
+		if (!PagePrivate(page)) {
+			SetPagePrivate(page);
+			page_cache_get(page);
+		}
 		page_cache_release(page);
 
 		buf += copylen;
@@ -110,7 +114,10 @@
 		page = get_mapping_page(sb, index, 0);
 		BUG_ON(!page); /* FIXME: reserve a pool */
 		memset(page_address(page) + offset, 0xff, len);
-		SetPagePrivate(page);
+		if (!PagePrivate(page)) {
+			SetPagePrivate(page);
+			page_cache_get(page);
+		}
 		page_cache_release(page);
 	}
 }
@@ -130,7 +137,10 @@
 		BUG_ON(!page); /* FIXME: reserve a pool */
 		SetPageUptodate(page);
 		memset(page_address(page), 0xff, PAGE_CACHE_SIZE);
-		SetPagePrivate(page);
+		if (!PagePrivate(page)) {
+			SetPagePrivate(page);
+			page_cache_get(page);
+		}
 		page_cache_release(page);
 		index++;
 		no_indizes--;
@@ -485,8 +495,12 @@
 		mempool_free(item, super->s_alias_pool);
 	}
 	block->page = page;
-	SetPagePrivate(page);
-	page->private = (unsigned long)block;
+
+	if (!PagePrivate(page)) {
+		SetPagePrivate(page);
+		page_cache_get(page);
+		set_page_private(page, (unsigned long) block);
+	}
 	block->ops = &indirect_block_ops;
 	initialize_block_counters(page, block, data, 0);
 }
@@ -536,8 +550,12 @@
 		list_add(&item->list, &block->item_list);
 	}
 	block->page = NULL;
-	ClearPagePrivate(page);
-	page->private = 0;
+
+	if (PagePrivate(page)) {
+		ClearPagePrivate(page);
+		page_cache_release(page);
+		set_page_private(page, 0);
+	}
 	block->ops = &btree_block_ops;
 	err = alias_tree_insert(block->sb, block->ino, block->bix, block->level,
 			block);
@@ -702,7 +720,10 @@
 		page = find_get_page(mapping, ofs >> PAGE_SHIFT);
 		if (!page)
 			continue;
-		ClearPagePrivate(page);
+		if (PagePrivate(page)) {
+			ClearPagePrivate(page);
+			page_cache_release(page);
+		}
 		page_cache_release(page);
 	}
 }
@@ -841,6 +862,16 @@
 	kfree(area);
 }
 
+void free_areas(struct super_block *sb)
+{
+	struct logfs_super *super = logfs_super(sb);
+	int i;
+
+	for_each_area(i)
+		free_area(super->s_area[i]);
+	free_area(super->s_journal_area);
+}
+
 static struct logfs_area *alloc_area(struct super_block *sb)
 {
 	struct logfs_area *area;
@@ -923,10 +954,6 @@
 void logfs_cleanup_areas(struct super_block *sb)
 {
 	struct logfs_super *super = logfs_super(sb);
-	int i;
 
 	btree_grim_visitor128(&super->s_object_alias_tree, 0, kill_alias);
-	for_each_area(i)
-		free_area(super->s_area[i]);
-	free_area(super->s_journal_area);
 }
diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index e795c234..c9ee7f5 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -486,14 +486,15 @@
 	/* Alias entries slow down mount, so evict as many as possible */
 	sync_filesystem(sb);
 	logfs_write_anchor(sb);
+	free_areas(sb);
 
 	/*
 	 * From this point on alias entries are simply dropped - and any
 	 * writes to the object store are considered bugs.
 	 */
-	super->s_flags |= LOGFS_SB_FLAG_SHUTDOWN;
 	log_super("LogFS: Now in shutdown\n");
 	generic_shutdown_super(sb);
+	super->s_flags |= LOGFS_SB_FLAG_SHUTDOWN;
 
 	BUG_ON(super->s_dirty_used_bytes || super->s_dirty_free_bytes);
 
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 9cde9edf..d9512bd 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -711,6 +711,13 @@
 	if (IS_ERR(mm))
 		return PTR_ERR(mm);
 
+	if (mm) {
+		/* ensure this mm_struct can't be freed */
+		atomic_inc(&mm->mm_count);
+		/* but do not pin its memory */
+		mmput(mm);
+	}
+
 	/* OK to pass negative loff_t, we can catch out-of-range */
 	file->f_mode |= FMODE_UNSIGNED_OFFSET;
 	file->private_data = mm;
@@ -718,57 +725,13 @@
 	return 0;
 }
 
-static ssize_t mem_read(struct file * file, char __user * buf,
-			size_t count, loff_t *ppos)
+static ssize_t mem_rw(struct file *file, char __user *buf,
+			size_t count, loff_t *ppos, int write)
 {
-	int ret;
-	char *page;
-	unsigned long src = *ppos;
 	struct mm_struct *mm = file->private_data;
-
-	if (!mm)
-		return 0;
-
-	page = (char *)__get_free_page(GFP_TEMPORARY);
-	if (!page)
-		return -ENOMEM;
-
-	ret = 0;
- 
-	while (count > 0) {
-		int this_len, retval;
-
-		this_len = (count > PAGE_SIZE) ? PAGE_SIZE : count;
-		retval = access_remote_vm(mm, src, page, this_len, 0);
-		if (!retval) {
-			if (!ret)
-				ret = -EIO;
-			break;
-		}
-
-		if (copy_to_user(buf, page, retval)) {
-			ret = -EFAULT;
-			break;
-		}
- 
-		ret += retval;
-		src += retval;
-		buf += retval;
-		count -= retval;
-	}
-	*ppos = src;
-
-	free_page((unsigned long) page);
-	return ret;
-}
-
-static ssize_t mem_write(struct file * file, const char __user *buf,
-			 size_t count, loff_t *ppos)
-{
-	int copied;
+	unsigned long addr = *ppos;
+	ssize_t copied;
 	char *page;
-	unsigned long dst = *ppos;
-	struct mm_struct *mm = file->private_data;
 
 	if (!mm)
 		return 0;
@@ -778,31 +741,54 @@
 		return -ENOMEM;
 
 	copied = 0;
-	while (count > 0) {
-		int this_len, retval;
+	if (!atomic_inc_not_zero(&mm->mm_users))
+		goto free;
 
-		this_len = (count > PAGE_SIZE) ? PAGE_SIZE : count;
-		if (copy_from_user(page, buf, this_len)) {
+	while (count > 0) {
+		int this_len = min_t(int, count, PAGE_SIZE);
+
+		if (write && copy_from_user(page, buf, this_len)) {
 			copied = -EFAULT;
 			break;
 		}
-		retval = access_remote_vm(mm, dst, page, this_len, 1);
-		if (!retval) {
+
+		this_len = access_remote_vm(mm, addr, page, this_len, write);
+		if (!this_len) {
 			if (!copied)
 				copied = -EIO;
 			break;
 		}
-		copied += retval;
-		buf += retval;
-		dst += retval;
-		count -= retval;			
-	}
-	*ppos = dst;
 
+		if (!write && copy_to_user(buf, page, this_len)) {
+			copied = -EFAULT;
+			break;
+		}
+
+		buf += this_len;
+		addr += this_len;
+		copied += this_len;
+		count -= this_len;
+	}
+	*ppos = addr;
+
+	mmput(mm);
+free:
 	free_page((unsigned long) page);
 	return copied;
 }
 
+static ssize_t mem_read(struct file *file, char __user *buf,
+			size_t count, loff_t *ppos)
+{
+	return mem_rw(file, buf, count, ppos, 0);
+}
+
+static ssize_t mem_write(struct file *file, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	return mem_rw(file, (char __user*)buf, count, ppos, 1);
+}
+
 loff_t mem_lseek(struct file *file, loff_t offset, int orig)
 {
 	switch (orig) {
@@ -822,8 +808,8 @@
 static int mem_release(struct inode *inode, struct file *file)
 {
 	struct mm_struct *mm = file->private_data;
-
-	mmput(mm);
+	if (mm)
+		mmdrop(mm);
 	return 0;
 }
 
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 62f4fb3..00012e3 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -493,6 +493,12 @@
 	const void *ns = NULL;
 	int err;
 
+	if (!dir_sd) {
+		WARN(1, KERN_ERR "sysfs: kobject %s without dirent\n",
+			kobject_name(kobj));
+		return -ENOENT;
+	}
+
 	err = 0;
 	if (!sysfs_ns_type(dir_sd))
 		goto out;
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 4a802b4..85eb816 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -318,8 +318,11 @@
 	struct sysfs_addrm_cxt acxt;
 	struct sysfs_dirent *sd;
 
-	if (!dir_sd)
+	if (!dir_sd) {
+		WARN(1, KERN_WARNING "sysfs: can not remove '%s', no directory\n",
+			name);
 		return -ENOENT;
+	}
 
 	sysfs_addrm_start(&acxt, dir_sd);
 
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index 0ab54e1..d09af4b 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -39,6 +39,7 @@
 extern int freeze_processes(void);
 extern int freeze_kernel_threads(void);
 extern void thaw_processes(void);
+extern void thaw_kernel_threads(void);
 
 static inline bool try_to_freeze(void)
 {
@@ -174,6 +175,7 @@
 static inline int freeze_processes(void) { return -ENOSYS; }
 static inline int freeze_kernel_threads(void) { return -ENOSYS; }
 static inline void thaw_processes(void) {}
+static inline void thaw_kernel_threads(void) {}
 
 static inline bool try_to_freeze(void) { return false; }
 
diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
index 1515e64..f88c1cc 100644
--- a/include/linux/mfd/mcp.h
+++ b/include/linux/mfd/mcp.h
@@ -10,7 +10,6 @@
 #ifndef MCP_H
 #define MCP_H
 
-#include <linux/mod_devicetable.h>
 #include <mach/dma.h>
 
 struct mcp_ops;
@@ -27,7 +26,7 @@
 	dma_device_t	dma_telco_rd;
 	dma_device_t	dma_telco_wr;
 	struct device	attached_device;
-	const char	*codec;
+	int		gpio_base;
 };
 
 struct mcp_ops {
@@ -45,11 +44,10 @@
 unsigned int mcp_reg_read(struct mcp *, unsigned int);
 void mcp_enable(struct mcp *);
 void mcp_disable(struct mcp *);
-const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp);
 #define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
 
 struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_register(struct mcp *, void *);
+int mcp_host_register(struct mcp *);
 void mcp_host_unregister(struct mcp *);
 
 struct mcp_driver {
@@ -58,7 +56,6 @@
 	void (*remove)(struct mcp *);
 	int (*suspend)(struct mcp *, pm_message_t);
 	int (*resume)(struct mcp *);
-	const struct mcp_device_id *id_table;
 };
 
 int mcp_driver_register(struct mcp_driver *);
@@ -67,6 +64,9 @@
 #define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
 #define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
 
-#define mcp_priv(mcp)		((void *)((mcp)+1))
+static inline void *mcp_priv(struct mcp *mcp)
+{
+	return mcp + 1;
+}
 
 #endif
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
index bc19e5f..4321f04 100644
--- a/include/linux/mfd/ucb1x00.h
+++ b/include/linux/mfd/ucb1x00.h
@@ -104,9 +104,6 @@
 #define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
 #define UCB_MODE_AUD_OFF_CAN	(1 << 13)
 
-struct ucb1x00_plat_data {
-	int		gpio_base;
-};
 
 struct ucb1x00_irq {
 	void *devid;
@@ -119,7 +116,7 @@
 	unsigned int		irq;
 	struct semaphore	adc_sem;
 	spinlock_t		io_lock;
-	const struct mcp_device_id *id;
+	u16			id;
 	u16			io_dir;
 	u16			io_out;
 	u16			adc_cr;
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index b29e7f6..83ac071 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -436,17 +436,6 @@
 			__attribute__((aligned(sizeof(kernel_ulong_t))));
 };
 
-/* mcp */
-
-#define MCP_NAME_SIZE	20
-#define MCP_MODULE_PREFIX "mcp:"
-
-struct mcp_device_id {
-	char name[MCP_NAME_SIZE];
-	kernel_ulong_t driver_data	/* Data private to the driver */
-			__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
 /* dmi */
 enum dmi_field {
 	DMI_NONE,
diff --git a/include/linux/mpi.h b/include/linux/mpi.h
index 06f8899..d02cca6 100644
--- a/include/linux/mpi.h
+++ b/include/linux/mpi.h
@@ -57,8 +57,6 @@
 
 typedef struct gcry_mpi *MPI;
 
-#define MPI_NULL NULL
-
 #define mpi_get_nlimbs(a)     ((a)->nlimbs)
 #define mpi_is_neg(a)	      ((a)->sign)
 
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 1a81fde..887ebe3 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -441,7 +441,7 @@
 static inline int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	if (!mtd->block_isbad)
-		return -EOPNOTSUPP;
+		return 0;
 	return mtd->block_isbad(mtd, ofs);
 }
 
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 0885561..abb2776 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -587,6 +587,7 @@
 	u64				sample_period;
 	u64				last_period;
 	local64_t			period_left;
+	u64                             interrupts_seq;
 	u64				interrupts;
 
 	u64				freq_time_stamp;
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 513f524..2234985 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2090,7 +2090,7 @@
  * is_idle_task - is the specified task an idle task?
  * @p: the task in question.
  */
-static inline bool is_idle_task(struct task_struct *p)
+static inline bool is_idle_task(const struct task_struct *p)
 {
 	return p->pid == 0;
 }
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
deleted file mode 100644
index 20f63d3..0000000
--- a/include/linux/sysdev.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/**
- * System devices follow a slightly different driver model. 
- * They don't need to do dynammic driver binding, can't be probed, 
- * and don't reside on any type of peripheral bus. 
- * So, we represent and treat them a little differently.
- * 
- * We still have a notion of a driver for a system device, because we still
- * want to perform basic operations on these devices. 
- *
- * We also support auxiliary drivers binding to devices of a certain class.
- * 
- * This allows configurable drivers to register themselves for devices of
- * a certain type. And, it allows class definitions to reside in generic
- * code while arch-specific code can register specific drivers.
- *
- * Auxiliary drivers registered with a NULL cls are registered as drivers
- * for all system devices, and get notification calls for each device. 
- */
-
-
-#ifndef _SYSDEV_H_
-#define _SYSDEV_H_
-
-#include <linux/kobject.h>
-#include <linux/pm.h>
-
-
-struct sys_device;
-struct sysdev_class_attribute;
-
-struct sysdev_class {
-	const char *name;
-	struct list_head	drivers;
-	struct sysdev_class_attribute **attrs;
-	struct kset		kset;
-};
-
-struct sysdev_class_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct sysdev_class *, struct sysdev_class_attribute *,
-			char *);
-	ssize_t (*store)(struct sysdev_class *, struct sysdev_class_attribute *,
-			 const char *, size_t);
-};
-
-#define _SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) 		\
-{					 			\
-	.attr = {.name = __stringify(_name), .mode = _mode },	\
-	.show	= _show,					\
-	.store	= _store,					\
-}
-
-#define SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) 		\
-	struct sysdev_class_attribute attr_##_name = 		\
-		_SYSDEV_CLASS_ATTR(_name,_mode,_show,_store)
-
-
-extern int sysdev_class_register(struct sysdev_class *);
-extern void sysdev_class_unregister(struct sysdev_class *);
-
-extern int sysdev_class_create_file(struct sysdev_class *,
-	struct sysdev_class_attribute *);
-extern void sysdev_class_remove_file(struct sysdev_class *,
-	struct sysdev_class_attribute *);
-/**
- * Auxiliary system device drivers.
- */
-
-struct sysdev_driver {
-	struct list_head	entry;
-	int	(*add)(struct sys_device *);
-	int	(*remove)(struct sys_device *);
-};
-
-
-extern int sysdev_driver_register(struct sysdev_class *, struct sysdev_driver *);
-extern void sysdev_driver_unregister(struct sysdev_class *, struct sysdev_driver *);
-
-
-/**
- * sys_devices can be simplified a lot from regular devices, because they're
- * simply not as versatile. 
- */
-
-struct sys_device {
-	u32		id;
-	struct sysdev_class	* cls;
-	struct kobject		kobj;
-};
-
-extern int sysdev_register(struct sys_device *);
-extern void sysdev_unregister(struct sys_device *);
-
-
-struct sysdev_attribute { 
-	struct attribute	attr;
-	ssize_t (*show)(struct sys_device *, struct sysdev_attribute *, char *);
-	ssize_t (*store)(struct sys_device *, struct sysdev_attribute *,
-			 const char *, size_t);
-};
-
-
-#define _SYSDEV_ATTR(_name, _mode, _show, _store)		\
-{								\
-	.attr = { .name = __stringify(_name), .mode = _mode },	\
-	.show	= _show,					\
-	.store	= _store,					\
-}
-
-#define SYSDEV_ATTR(_name, _mode, _show, _store)		\
-	struct sysdev_attribute attr_##_name =			\
-		_SYSDEV_ATTR(_name, _mode, _show, _store);
-
-extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *);
-extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *);
-
-/* Create/remove NULL terminated attribute list */
-static inline int
-sysdev_create_files(struct sys_device *d, struct sysdev_attribute **a)
-{
-	return sysfs_create_files(&d->kobj, (const struct attribute **)a);
-}
-
-static inline void
-sysdev_remove_files(struct sys_device *d, struct sysdev_attribute **a)
-{
-	return sysfs_remove_files(&d->kobj, (const struct attribute **)a);
-}
-
-struct sysdev_ext_attribute {
-	struct sysdev_attribute attr;
-	void *var;
-};
-
-/*
- * Support for simple variable sysdev attributes.
- * The pointer to the variable is stored in a sysdev_ext_attribute
- */
-
-/* Add more types as needed */
-
-extern ssize_t sysdev_show_ulong(struct sys_device *, struct sysdev_attribute *,
-				char *);
-extern ssize_t sysdev_store_ulong(struct sys_device *,
-			struct sysdev_attribute *, const char *, size_t);
-extern ssize_t sysdev_show_int(struct sys_device *, struct sysdev_attribute *,
-				char *);
-extern ssize_t sysdev_store_int(struct sys_device *,
-			struct sysdev_attribute *, const char *, size_t);
-
-#define _SYSDEV_ULONG_ATTR(_name, _mode, _var)				\
-	{ _SYSDEV_ATTR(_name, _mode, sysdev_show_ulong, sysdev_store_ulong), \
-	  &(_var) }
-#define SYSDEV_ULONG_ATTR(_name, _mode, _var)			\
-	struct sysdev_ext_attribute attr_##_name = 		\
-		_SYSDEV_ULONG_ATTR(_name, _mode, _var);
-#define _SYSDEV_INT_ATTR(_name, _mode, _var)				\
-	{ _SYSDEV_ATTR(_name, _mode, sysdev_show_int, sysdev_store_int), \
-	  &(_var) }
-#define SYSDEV_INT_ATTR(_name, _mode, _var)			\
-	struct sysdev_ext_attribute attr_##_name = 		\
-		_SYSDEV_INT_ATTR(_name, _mode, _var);
-
-#endif /* _SYSDEV_H_ */
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
deleted file mode 100644
index 51f17b1..0000000
--- a/include/linux/usb/langwell_otg.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2010, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_OTG_H
-#define __LANGWELL_OTG_H
-
-#include <linux/usb/intel_mid_otg.h>
-
-#define CI_USBCMD		0x30
-#	define USBCMD_RST		BIT(1)
-#	define USBCMD_RS		BIT(0)
-#define CI_USBSTS		0x34
-#	define USBSTS_SLI		BIT(8)
-#	define USBSTS_URI		BIT(6)
-#	define USBSTS_PCI		BIT(2)
-#define CI_PORTSC1		0x74
-#	define PORTSC_PP		BIT(12)
-#	define PORTSC_LS		(BIT(11) | BIT(10))
-#	define PORTSC_SUSP		BIT(7)
-#	define PORTSC_CCS		BIT(0)
-#define CI_HOSTPC1		0xb4
-#	define HOSTPC1_PHCD		BIT(22)
-#define CI_OTGSC		0xf4
-#	define OTGSC_DPIE		BIT(30)
-#	define OTGSC_1MSE		BIT(29)
-#	define OTGSC_BSEIE		BIT(28)
-#	define OTGSC_BSVIE		BIT(27)
-#	define OTGSC_ASVIE		BIT(26)
-#	define OTGSC_AVVIE		BIT(25)
-#	define OTGSC_IDIE		BIT(24)
-#	define OTGSC_DPIS		BIT(22)
-#	define OTGSC_1MSS		BIT(21)
-#	define OTGSC_BSEIS		BIT(20)
-#	define OTGSC_BSVIS		BIT(19)
-#	define OTGSC_ASVIS		BIT(18)
-#	define OTGSC_AVVIS		BIT(17)
-#	define OTGSC_IDIS		BIT(16)
-#	define OTGSC_DPS		BIT(14)
-#	define OTGSC_1MST		BIT(13)
-#	define OTGSC_BSE		BIT(12)
-#	define OTGSC_BSV		BIT(11)
-#	define OTGSC_ASV		BIT(10)
-#	define OTGSC_AVV		BIT(9)
-#	define OTGSC_ID			BIT(8)
-#	define OTGSC_HABA		BIT(7)
-#	define OTGSC_HADP		BIT(6)
-#	define OTGSC_IDPU		BIT(5)
-#	define OTGSC_DP			BIT(4)
-#	define OTGSC_OT			BIT(3)
-#	define OTGSC_HAAR		BIT(2)
-#	define OTGSC_VC			BIT(1)
-#	define OTGSC_VD			BIT(0)
-#	define OTGSC_INTEN_MASK		(0x7f << 24)
-#	define OTGSC_INT_MASK		(0x5f << 24)
-#	define OTGSC_INTSTS_MASK	(0x7f << 16)
-#define CI_USBMODE		0xf8
-#	define USBMODE_CM		(BIT(1) | BIT(0))
-#	define USBMODE_IDLE		0
-#	define USBMODE_DEVICE		0x2
-#	define USBMODE_HOST		0x3
-#define USBCFG_ADDR			0xff10801c
-#define USBCFG_LEN			4
-#	define USBCFG_VBUSVAL		BIT(14)
-#	define USBCFG_AVALID		BIT(13)
-#	define USBCFG_BVALID		BIT(12)
-#	define USBCFG_SESEND		BIT(11)
-
-#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
-
-enum langwell_otg_timer_type {
-	TA_WAIT_VRISE_TMR,
-	TA_WAIT_BCON_TMR,
-	TA_AIDL_BDIS_TMR,
-	TB_ASE0_BRST_TMR,
-	TB_SE0_SRP_TMR,
-	TB_SRP_INIT_TMR,
-	TB_SRP_FAIL_TMR,
-	TB_BUS_SUSPEND_TMR
-};
-
-#define TA_WAIT_VRISE	100
-#define TA_WAIT_BCON	30000
-#define TA_AIDL_BDIS	15000
-#define TB_ASE0_BRST	5000
-#define TB_SE0_SRP	2
-#define TB_SRP_INIT	100
-#define TB_SRP_FAIL	5500
-#define TB_BUS_SUSPEND	500
-
-struct langwell_otg_timer {
-	unsigned long expires;	/* Number of count increase to timeout */
-	unsigned long count;	/* Tick counter */
-	void (*function)(unsigned long);	/* Timeout function */
-	unsigned long data;	/* Data passed to function */
-	struct list_head list;
-};
-
-struct langwell_otg {
-	struct intel_mid_otg_xceiv	iotg;
-	struct device			*dev;
-
-	void __iomem			*usbcfg;	/* SCCBUSB config Reg */
-
-	unsigned			region;
-	unsigned			cfg_region;
-
-	struct work_struct		work;
-	struct workqueue_struct		*qwork;
-	struct timer_list		hsm_timer;
-
-	spinlock_t			lock;
-	spinlock_t			wq_lock;
-
-	struct notifier_block		iotg_notifier;
-};
-
-static inline
-struct langwell_otg *mid_xceiv_to_lnw(struct intel_mid_otg_xceiv *iotg)
-{
-	return container_of(iotg, struct langwell_otg, iotg);
-}
-
-#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/net/netns/generic.h b/include/net/netns/generic.h
index 3419bf5..d55f434 100644
--- a/include/net/netns/generic.h
+++ b/include/net/netns/generic.h
@@ -41,6 +41,7 @@
 	ptr = ng->ptr[id - 1];
 	rcu_read_unlock();
 
+	BUG_ON(!ptr);
 	return ptr;
 }
 #endif
diff --git a/include/net/sock.h b/include/net/sock.h
index 4c69ac1..91c1c8b 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -55,6 +55,7 @@
 #include <linux/uaccess.h>
 #include <linux/memcontrol.h>
 #include <linux/res_counter.h>
+#include <linux/jump_label.h>
 
 #include <linux/filter.h>
 #include <linux/rculist_nulls.h>
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 0118ea9..d49db01 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -311,6 +311,8 @@
 #define TCP_ADD_STATS_USER(net, field, val) SNMP_ADD_STATS_USER((net)->mib.tcp_statistics, field, val)
 #define TCP_ADD_STATS(net, field, val)	SNMP_ADD_STATS((net)->mib.tcp_statistics, field, val)
 
+extern void tcp_init_mem(struct net *net);
+
 extern void tcp_v4_err(struct sk_buff *skb, u32);
 
 extern void tcp_shutdown (struct sock *sk, int how);
diff --git a/kernel/events/callchain.c b/kernel/events/callchain.c
index 057e24b..6581a04 100644
--- a/kernel/events/callchain.c
+++ b/kernel/events/callchain.c
@@ -115,8 +115,6 @@
 	}
 
 	err = alloc_callchain_buffers();
-	if (err)
-		release_callchain_buffers();
 exit:
 	mutex_unlock(&callchain_mutex);
 
diff --git a/kernel/events/core.c b/kernel/events/core.c
index a8f4ac0..ba36013 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -815,7 +815,7 @@
 	 * here.
 	 */
 	if (is_cgroup_event(event))
-		run_end = perf_event_time(event);
+		run_end = perf_cgroup_event_time(event);
 	else if (ctx->is_active)
 		run_end = ctx->time;
 	else
@@ -2300,6 +2300,9 @@
 	return div64_u64(dividend, divisor);
 }
 
+static DEFINE_PER_CPU(int, perf_throttled_count);
+static DEFINE_PER_CPU(u64, perf_throttled_seq);
+
 static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
 {
 	struct hw_perf_event *hwc = &event->hw;
@@ -2325,16 +2328,29 @@
 	}
 }
 
-static void perf_ctx_adjust_freq(struct perf_event_context *ctx, u64 period)
+/*
+ * combine freq adjustment with unthrottling to avoid two passes over the
+ * events. At the same time, make sure, having freq events does not change
+ * the rate of unthrottling as that would introduce bias.
+ */
+static void perf_adjust_freq_unthr_context(struct perf_event_context *ctx,
+					   int needs_unthr)
 {
 	struct perf_event *event;
 	struct hw_perf_event *hwc;
-	u64 interrupts, now;
+	u64 now, period = TICK_NSEC;
 	s64 delta;
 
-	if (!ctx->nr_freq)
+	/*
+	 * only need to iterate over all events iff:
+	 * - context have events in frequency mode (needs freq adjust)
+	 * - there are events to unthrottle on this cpu
+	 */
+	if (!(ctx->nr_freq || needs_unthr))
 		return;
 
+	raw_spin_lock(&ctx->lock);
+
 	list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
 		if (event->state != PERF_EVENT_STATE_ACTIVE)
 			continue;
@@ -2344,13 +2360,8 @@
 
 		hwc = &event->hw;
 
-		interrupts = hwc->interrupts;
-		hwc->interrupts = 0;
-
-		/*
-		 * unthrottle events on the tick
-		 */
-		if (interrupts == MAX_INTERRUPTS) {
+		if (needs_unthr && hwc->interrupts == MAX_INTERRUPTS) {
+			hwc->interrupts = 0;
 			perf_log_throttle(event, 1);
 			event->pmu->start(event, 0);
 		}
@@ -2358,14 +2369,26 @@
 		if (!event->attr.freq || !event->attr.sample_freq)
 			continue;
 
-		event->pmu->read(event);
+		/*
+		 * stop the event and update event->count
+		 */
+		event->pmu->stop(event, PERF_EF_UPDATE);
+
 		now = local64_read(&event->count);
 		delta = now - hwc->freq_count_stamp;
 		hwc->freq_count_stamp = now;
 
+		/*
+		 * restart the event
+		 * reload only if value has changed
+		 */
 		if (delta > 0)
 			perf_adjust_period(event, period, delta);
+
+		event->pmu->start(event, delta > 0 ? PERF_EF_RELOAD : 0);
 	}
+
+	raw_spin_unlock(&ctx->lock);
 }
 
 /*
@@ -2388,16 +2411,13 @@
  */
 static void perf_rotate_context(struct perf_cpu_context *cpuctx)
 {
-	u64 interval = (u64)cpuctx->jiffies_interval * TICK_NSEC;
 	struct perf_event_context *ctx = NULL;
-	int rotate = 0, remove = 1, freq = 0;
+	int rotate = 0, remove = 1;
 
 	if (cpuctx->ctx.nr_events) {
 		remove = 0;
 		if (cpuctx->ctx.nr_events != cpuctx->ctx.nr_active)
 			rotate = 1;
-		if (cpuctx->ctx.nr_freq)
-			freq = 1;
 	}
 
 	ctx = cpuctx->task_ctx;
@@ -2405,37 +2425,26 @@
 		remove = 0;
 		if (ctx->nr_events != ctx->nr_active)
 			rotate = 1;
-		if (ctx->nr_freq)
-			freq = 1;
 	}
 
-	if (!rotate && !freq)
+	if (!rotate)
 		goto done;
 
 	perf_ctx_lock(cpuctx, cpuctx->task_ctx);
 	perf_pmu_disable(cpuctx->ctx.pmu);
 
-	if (freq) {
-		perf_ctx_adjust_freq(&cpuctx->ctx, interval);
-		if (ctx)
-			perf_ctx_adjust_freq(ctx, interval);
-	}
+	cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE);
+	if (ctx)
+		ctx_sched_out(ctx, cpuctx, EVENT_FLEXIBLE);
 
-	if (rotate) {
-		cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE);
-		if (ctx)
-			ctx_sched_out(ctx, cpuctx, EVENT_FLEXIBLE);
+	rotate_ctx(&cpuctx->ctx);
+	if (ctx)
+		rotate_ctx(ctx);
 
-		rotate_ctx(&cpuctx->ctx);
-		if (ctx)
-			rotate_ctx(ctx);
-
-		perf_event_sched_in(cpuctx, ctx, current);
-	}
+	perf_event_sched_in(cpuctx, ctx, current);
 
 	perf_pmu_enable(cpuctx->ctx.pmu);
 	perf_ctx_unlock(cpuctx, cpuctx->task_ctx);
-
 done:
 	if (remove)
 		list_del_init(&cpuctx->rotation_list);
@@ -2445,10 +2454,22 @@
 {
 	struct list_head *head = &__get_cpu_var(rotation_list);
 	struct perf_cpu_context *cpuctx, *tmp;
+	struct perf_event_context *ctx;
+	int throttled;
 
 	WARN_ON(!irqs_disabled());
 
+	__this_cpu_inc(perf_throttled_seq);
+	throttled = __this_cpu_xchg(perf_throttled_count, 0);
+
 	list_for_each_entry_safe(cpuctx, tmp, head, rotation_list) {
+		ctx = &cpuctx->ctx;
+		perf_adjust_freq_unthr_context(ctx, throttled);
+
+		ctx = cpuctx->task_ctx;
+		if (ctx)
+			perf_adjust_freq_unthr_context(ctx, throttled);
+
 		if (cpuctx->jiffies_interval == 1 ||
 				!(jiffies % cpuctx->jiffies_interval))
 			perf_rotate_context(cpuctx);
@@ -4509,6 +4530,7 @@
 {
 	int events = atomic_read(&event->event_limit);
 	struct hw_perf_event *hwc = &event->hw;
+	u64 seq;
 	int ret = 0;
 
 	/*
@@ -4518,14 +4540,20 @@
 	if (unlikely(!is_sampling_event(event)))
 		return 0;
 
-	if (unlikely(hwc->interrupts >= max_samples_per_tick)) {
-		if (throttle) {
+	seq = __this_cpu_read(perf_throttled_seq);
+	if (seq != hwc->interrupts_seq) {
+		hwc->interrupts_seq = seq;
+		hwc->interrupts = 1;
+	} else {
+		hwc->interrupts++;
+		if (unlikely(throttle
+			     && hwc->interrupts >= max_samples_per_tick)) {
+			__this_cpu_inc(perf_throttled_count);
 			hwc->interrupts = MAX_INTERRUPTS;
 			perf_log_throttle(event, 0);
 			ret = 1;
 		}
-	} else
-		hwc->interrupts++;
+	}
 
 	if (event->attr.freq) {
 		u64 now = perf_clock();
diff --git a/kernel/power/process.c b/kernel/power/process.c
index 77274c9..eeca003 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -188,3 +188,22 @@
 	printk("done.\n");
 }
 
+void thaw_kernel_threads(void)
+{
+	struct task_struct *g, *p;
+
+	pm_nosig_freezing = false;
+	printk("Restarting kernel threads ... ");
+
+	thaw_workqueues();
+
+	read_lock(&tasklist_lock);
+	do_each_thread(g, p) {
+		if (p->flags & (PF_KTHREAD | PF_WQ_WORKER))
+			__thaw_task(p);
+	} while_each_thread(g, p);
+	read_unlock(&tasklist_lock);
+
+	schedule();
+	printk("done.\n");
+}
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 6b1ab7a..e5a21a8 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -274,6 +274,15 @@
 		swsusp_free();
 		memset(&data->handle, 0, sizeof(struct snapshot_handle));
 		data->ready = 0;
+		/*
+		 * It is necessary to thaw kernel threads here, because
+		 * SNAPSHOT_CREATE_IMAGE may be invoked directly after
+		 * SNAPSHOT_FREE.  In that case, if kernel threads were not
+		 * thawed, the preallocation of memory carried out by
+		 * hibernation_snapshot() might run into problems (i.e. it
+		 * might fail or even deadlock).
+		 */
+		thaw_kernel_threads();
 		break;
 
 	case SNAPSHOT_PREF_IMAGE_SIZE:
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 88f17b8..a58ac28 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -56,8 +56,8 @@
 static int nfakewriters = 4;	/* # fake writer threads */
 static int stat_interval;	/* Interval between stats, in seconds. */
 				/*  Defaults to "only at end of test". */
-static int verbose;		/* Print more debug info. */
-static int test_no_idle_hz;	/* Test RCU's support for tickless idle CPUs. */
+static bool verbose;		/* Print more debug info. */
+static bool test_no_idle_hz;	/* Test RCU's support for tickless idle CPUs. */
 static int shuffle_interval = 3; /* Interval between shuffles (in sec)*/
 static int stutter = 5;		/* Start/stop testing interval (in sec) */
 static int irqreader = 1;	/* RCU readers from irq (timers). */
@@ -1399,7 +1399,7 @@
  * Execute random CPU-hotplug operations at the interval specified
  * by the onoff_interval.
  */
-static int
+static int __cpuinit
 rcu_torture_onoff(void *arg)
 {
 	int cpu;
@@ -1447,7 +1447,7 @@
 	return 0;
 }
 
-static int
+static int __cpuinit
 rcu_torture_onoff_init(void)
 {
 	if (onoff_interval <= 0)
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 1d7bca7..d117262 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -296,7 +296,7 @@
 		if (__this_cpu_read(soft_watchdog_warn) == true)
 			return HRTIMER_RESTART;
 
-		printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
+		printk(KERN_EMERG "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
 			smp_processor_id(), duration,
 			current->comm, task_pid_nr(current));
 		print_modules();
diff --git a/lib/Kconfig b/lib/Kconfig
index 169eb7c..d69d321 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -279,6 +279,9 @@
 
 	  If unsure, say N.
 
+config CLZ_TAB
+	bool
+
 config CORDIC
 	tristate "CORDIC algorithm"
 	help
@@ -287,6 +290,7 @@
 
 config MPILIB
 	tristate
+	select CLZ_TAB
 	help
 	  Multiprecision maths library from GnuPG.
 	  It is used to implement RSA digital signature verification,
diff --git a/lib/Makefile b/lib/Makefile
index d71aae1..18515f0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -121,6 +121,8 @@
 obj-$(CONFIG_MPILIB) += mpi/
 obj-$(CONFIG_SIGNATURE) += digsig.o
 
+obj-$(CONFIG_CLZ_TAB) += clz_tab.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/bug.c b/lib/bug.c
index 1955209..a28c141 100644
--- a/lib/bug.c
+++ b/lib/bug.c
@@ -169,7 +169,7 @@
 		return BUG_TRAP_TYPE_WARN;
 	}
 
-	printk(KERN_EMERG "------------[ cut here ]------------\n");
+	printk(KERN_DEFAULT "------------[ cut here ]------------\n");
 
 	if (file)
 		printk(KERN_CRIT "kernel BUG at %s:%u!\n",
diff --git a/lib/clz_tab.c b/lib/clz_tab.c
new file mode 100644
index 0000000..7287b4a
--- /dev/null
+++ b/lib/clz_tab.c
@@ -0,0 +1,18 @@
+const unsigned char __clz_tab[] = {
+	0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5,
+	    5, 5, 5, 5, 5, 5, 5, 5,
+	6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+	    6, 6, 6, 6, 6, 6, 6, 6,
+	7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	    7, 7, 7, 7, 7, 7, 7, 7,
+	7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	    7, 7, 7, 7, 7, 7, 7, 7,
+	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+	    8, 8, 8, 8, 8, 8, 8, 8,
+	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+	    8, 8, 8, 8, 8, 8, 8, 8,
+	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+	    8, 8, 8, 8, 8, 8, 8, 8,
+	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+	    8, 8, 8, 8, 8, 8, 8, 8,
+};
diff --git a/lib/digsig.c b/lib/digsig.c
index fd2402f..286d558 100644
--- a/lib/digsig.c
+++ b/lib/digsig.c
@@ -34,14 +34,9 @@
 			unsigned long  msglen,
 			unsigned long  modulus_bitlen,
 			unsigned char *out,
-			unsigned long *outlen,
-			int *is_valid)
+			unsigned long *outlen)
 {
 	unsigned long modulus_len, ps_len, i;
-	int result;
-
-	/* default to invalid packet */
-	*is_valid = 0;
 
 	modulus_len = (modulus_bitlen >> 3) + (modulus_bitlen & 7 ? 1 : 0);
 
@@ -50,39 +45,30 @@
 		return -EINVAL;
 
 	/* separate encoded message */
-	if ((msg[0] != 0x00) || (msg[1] != (unsigned char)1)) {
-		result = -EINVAL;
-		goto bail;
-	}
+	if ((msg[0] != 0x00) || (msg[1] != (unsigned char)1))
+		return -EINVAL;
 
 	for (i = 2; i < modulus_len - 1; i++)
 		if (msg[i] != 0xFF)
 			break;
 
 	/* separator check */
-	if (msg[i] != 0) {
+	if (msg[i] != 0)
 		/* There was no octet with hexadecimal value 0x00
 		to separate ps from m. */
-		result = -EINVAL;
-		goto bail;
-	}
+		return -EINVAL;
 
 	ps_len = i - 2;
 
 	if (*outlen < (msglen - (2 + ps_len + 1))) {
 		*outlen = msglen - (2 + ps_len + 1);
-		result = -EOVERFLOW;
-		goto bail;
+		return -EOVERFLOW;
 	}
 
 	*outlen = (msglen - (2 + ps_len + 1));
 	memcpy(out, &msg[2 + ps_len + 1], *outlen);
 
-	/* valid packet */
-	*is_valid = 1;
-	result    = 0;
-bail:
-	return result;
+	return 0;
 }
 
 /*
@@ -96,7 +82,7 @@
 	unsigned long len;
 	unsigned long mlen, mblen;
 	unsigned nret, l;
-	int valid, head, i;
+	int head, i;
 	unsigned char *out1 = NULL, *out2 = NULL;
 	MPI in = NULL, res = NULL, pkey[2];
 	uint8_t *p, *datap, *endp;
@@ -105,6 +91,10 @@
 
 	down_read(&key->sem);
 	ukp = key->payload.data;
+
+	if (ukp->datalen < sizeof(*pkh))
+		goto err1;
+
 	pkh = (struct pubkey_hdr *)ukp->data;
 
 	if (pkh->version != 1)
@@ -117,18 +107,23 @@
 		goto err1;
 
 	datap = pkh->mpi;
-	endp = datap + ukp->datalen;
+	endp = ukp->data + ukp->datalen;
+
+	err = -ENOMEM;
 
 	for (i = 0; i < pkh->nmpi; i++) {
 		unsigned int remaining = endp - datap;
 		pkey[i] = mpi_read_from_buffer(datap, &remaining);
+		if (!pkey[i])
+			goto err;
 		datap += remaining;
 	}
 
 	mblen = mpi_get_nbits(pkey[0]);
 	mlen = (mblen + 7)/8;
 
-	err = -ENOMEM;
+	if (mlen == 0)
+		goto err;
 
 	out1 = kzalloc(mlen, GFP_KERNEL);
 	if (!out1)
@@ -167,10 +162,9 @@
 	memset(out1, 0, head);
 	memcpy(out1 + head, p, l);
 
-	err = -EINVAL;
-	pkcs_1_v1_5_decode_emsa(out1, len, mblen, out2, &len, &valid);
+	err = pkcs_1_v1_5_decode_emsa(out1, len, mblen, out2, &len);
 
-	if (valid && len == hlen)
+	if (!err && len == hlen)
 		err = memcmp(out2, h, hlen);
 
 err:
@@ -178,8 +172,8 @@
 	mpi_free(res);
 	kfree(out1);
 	kfree(out2);
-	mpi_free(pkey[0]);
-	mpi_free(pkey[1]);
+	while (--i >= 0)
+		mpi_free(pkey[i]);
 err1:
 	up_read(&key->sem);
 
diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h
index b87487b..29f9862 100644
--- a/lib/mpi/longlong.h
+++ b/lib/mpi/longlong.h
@@ -1200,18 +1200,40 @@
 	"r" ((USItype)(v)) \
 	: "%g1", "%g2" __AND_CLOBBER_CC)
 #define UMUL_TIME 39		/* 39 instructions */
-#endif
-#ifndef udiv_qrnnd
-#ifndef LONGLONG_STANDALONE
+/* It's quite necessary to add this much assembler for the sparc.
+   The default udiv_qrnnd (in C) is more than 10 times slower!  */
 #define udiv_qrnnd(q, r, n1, n0, d) \
-do { USItype __r; \
-	(q) = __udiv_qrnnd(&__r, (n1), (n0), (d)); \
-	(r) = __r; \
-} while (0)
-	extern USItype __udiv_qrnnd();
-#define UDIV_TIME 140
-#endif /* LONGLONG_STANDALONE */
-#endif /* udiv_qrnnd */
+  __asm__ ("! Inlined udiv_qrnnd\n\t"					\
+	   "mov	32,%%g1\n\t"						\
+	   "subcc	%1,%2,%%g0\n\t"					\
+	   "1:	bcs	5f\n\t"						\
+	   "addxcc %0,%0,%0	! shift n1n0 and a q-bit in lsb\n\t"	\
+	   "sub	%1,%2,%1	! this kills msb of n\n\t"		\
+	   "addx	%1,%1,%1	! so this can't give carry\n\t"	\
+	   "subcc	%%g1,1,%%g1\n\t"				\
+	   "2:	bne	1b\n\t"						\
+	   "subcc	%1,%2,%%g0\n\t"					\
+	   "bcs	3f\n\t"							\
+	   "addxcc %0,%0,%0	! shift n1n0 and a q-bit in lsb\n\t"	\
+	   "b		3f\n\t"						\
+	   "sub	%1,%2,%1	! this kills msb of n\n\t"		\
+	   "4:	sub	%1,%2,%1\n\t"					\
+	   "5:	addxcc	%1,%1,%1\n\t"					\
+	   "bcc	2b\n\t"							\
+	   "subcc	%%g1,1,%%g1\n\t"				\
+	   "! Got carry from n.  Subtract next step to cancel this carry.\n\t" \
+	   "bne	4b\n\t"							\
+	   "addcc	%0,%0,%0	! shift n1n0 and a 0-bit in lsb\n\t" \
+	   "sub	%1,%2,%1\n\t"						\
+	   "3:	xnor	%0,0,%0\n\t"					\
+	   "! End of inline udiv_qrnnd\n"				\
+	   : "=&r" ((USItype)(q)),					\
+	     "=&r" ((USItype)(r))					\
+	   : "r" ((USItype)(d)),					\
+	     "1" ((USItype)(n1)),					\
+	     "0" ((USItype)(n0)) : "%g1", "cc")
+#define UDIV_TIME (3+7*32)      /* 7 instructions/iteration. 32 iterations.  */
+#endif
 #endif /* __sparc__ */
 
 /***************************************
diff --git a/lib/mpi/mpi-bit.c b/lib/mpi/mpi-bit.c
index 854c9c6..2f52662 100644
--- a/lib/mpi/mpi-bit.c
+++ b/lib/mpi/mpi-bit.c
@@ -21,25 +21,6 @@
 #include "mpi-internal.h"
 #include "longlong.h"
 
-const unsigned char __clz_tab[] = {
-	0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5,
-	    5, 5, 5, 5, 5, 5, 5, 5,
-	6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-	    6, 6, 6, 6, 6, 6, 6, 6,
-	7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-	    7, 7, 7, 7, 7, 7, 7, 7,
-	7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-	    7, 7, 7, 7, 7, 7, 7, 7,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-	8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-	    8, 8, 8, 8, 8, 8, 8, 8,
-};
-
 #define A_LIMB_1 ((mpi_limb_t) 1)
 
 /****************
diff --git a/lib/mpi/mpi-div.c b/lib/mpi/mpi-div.c
index c3087d1..f68cbbb 100644
--- a/lib/mpi/mpi-div.c
+++ b/lib/mpi/mpi-div.c
@@ -149,6 +149,9 @@
 	mpi_ptr_t marker[5];
 	int markidx = 0;
 
+	if (!dsize)
+		return -EINVAL;
+
 	memset(marker, 0, sizeof(marker));
 
 	/* Ensure space is enough for quotient and remainder.
@@ -207,6 +210,8 @@
 		 * numerator would be gradually overwritten by the quotient limbs.  */
 		if (qp == np) {	/* Copy NP object to temporary space.  */
 			np = marker[markidx++] = mpi_alloc_limb_space(nsize);
+			if (!np)
+				goto nomem;
 			MPN_COPY(np, qp, nsize);
 		}
 	} else			/* Put quotient at top of remainder. */
diff --git a/lib/mpi/mpi-pow.c b/lib/mpi/mpi-pow.c
index b04a3cf..67f3e79 100644
--- a/lib/mpi/mpi-pow.c
+++ b/lib/mpi/mpi-pow.c
@@ -59,7 +59,7 @@
 	ep = exp->d;
 
 	if (!msize)
-		msize = 1 / msize;	/* provoke a signal */
+		return -EINVAL;
 
 	if (!esize) {
 		/* Exponent is zero, result is 1 mod MOD, i.e., 1 or 0
diff --git a/lib/mpi/mpicoder.c b/lib/mpi/mpicoder.c
index 716802b..f26b41f 100644
--- a/lib/mpi/mpicoder.c
+++ b/lib/mpi/mpicoder.c
@@ -20,78 +20,15 @@
 
 #include "mpi-internal.h"
 
-#define DIM(v) (sizeof(v)/sizeof((v)[0]))
 #define MAX_EXTERN_MPI_BITS 16384
 
-static uint8_t asn[15] =	/* Object ID is 1.3.14.3.2.26 */
-{ 0x30, 0x21, 0x30, 0x09, 0x06, 0x05, 0x2b, 0x0e, 0x03,
-	0x02, 0x1a, 0x05, 0x00, 0x04, 0x14
-};
-
-MPI do_encode_md(const void *sha_buffer, unsigned nbits)
-{
-	int nframe = (nbits + 7) / 8;
-	uint8_t *frame, *fr_pt;
-	int i = 0, n;
-	size_t asnlen = DIM(asn);
-	MPI a = MPI_NULL;
-
-	if (SHA1_DIGEST_LENGTH + asnlen + 4 > nframe)
-		pr_info("MPI: can't encode a %d bit MD into a %d bits frame\n",
-		       (int)(SHA1_DIGEST_LENGTH * 8), (int)nbits);
-
-	/* We encode the MD in this way:
-	 *
-	 *       0  A PAD(n bytes)   0  ASN(asnlen bytes)  MD(len bytes)
-	 *
-	 * PAD consists of FF bytes.
-	 */
-	frame = kmalloc(nframe, GFP_KERNEL);
-	if (!frame)
-		return MPI_NULL;
-	n = 0;
-	frame[n++] = 0;
-	frame[n++] = 1;		/* block type */
-	i = nframe - SHA1_DIGEST_LENGTH - asnlen - 3;
-
-	if (i <= 1) {
-		pr_info("MPI: message digest encoding failed\n");
-		kfree(frame);
-		return a;
-	}
-
-	memset(frame + n, 0xff, i);
-	n += i;
-	frame[n++] = 0;
-	memcpy(frame + n, &asn, asnlen);
-	n += asnlen;
-	memcpy(frame + n, sha_buffer, SHA1_DIGEST_LENGTH);
-	n += SHA1_DIGEST_LENGTH;
-
-	i = nframe;
-	fr_pt = frame;
-
-	if (n != nframe) {
-		printk
-		    ("MPI: message digest encoding failed, frame length is wrong\n");
-		kfree(frame);
-		return a;
-	}
-
-	a = mpi_alloc((nframe + BYTES_PER_MPI_LIMB - 1) / BYTES_PER_MPI_LIMB);
-	mpi_set_buffer(a, frame, nframe, 0);
-	kfree(frame);
-
-	return a;
-}
-
 MPI mpi_read_from_buffer(const void *xbuffer, unsigned *ret_nread)
 {
 	const uint8_t *buffer = xbuffer;
 	int i, j;
 	unsigned nbits, nbytes, nlimbs, nread = 0;
 	mpi_limb_t a;
-	MPI val = MPI_NULL;
+	MPI val = NULL;
 
 	if (*ret_nread < 2)
 		goto leave;
@@ -108,7 +45,7 @@
 	nlimbs = (nbytes + BYTES_PER_MPI_LIMB - 1) / BYTES_PER_MPI_LIMB;
 	val = mpi_alloc(nlimbs);
 	if (!val)
-		return MPI_NULL;
+		return NULL;
 	i = BYTES_PER_MPI_LIMB - nbytes % BYTES_PER_MPI_LIMB;
 	i %= BYTES_PER_MPI_LIMB;
 	val->nbits = nbits;
@@ -212,30 +149,6 @@
 EXPORT_SYMBOL_GPL(mpi_fromstr);
 
 /****************
- * Special function to get the low 8 bytes from an mpi.
- * This can be used as a keyid; KEYID is an 2 element array.
- * Return the low 4 bytes.
- */
-u32 mpi_get_keyid(const MPI a, u32 *keyid)
-{
-#if BYTES_PER_MPI_LIMB == 4
-	if (keyid) {
-		keyid[0] = a->nlimbs >= 2 ? a->d[1] : 0;
-		keyid[1] = a->nlimbs >= 1 ? a->d[0] : 0;
-	}
-	return a->nlimbs >= 1 ? a->d[0] : 0;
-#elif BYTES_PER_MPI_LIMB == 8
-	if (keyid) {
-		keyid[0] = a->nlimbs ? (u32) (a->d[0] >> 32) : 0;
-		keyid[1] = a->nlimbs ? (u32) (a->d[0] & 0xffffffff) : 0;
-	}
-	return a->nlimbs ? (u32) (a->d[0] & 0xffffffff) : 0;
-#else
-#error Make this function work with other LIMB sizes
-#endif
-}
-
-/****************
  * Return an allocated buffer with the MPI (msb first).
  * NBYTES receives the length of this buffer. Caller must free the
  * return string (This function does return a 0 byte buffer with NBYTES
diff --git a/lib/mpi/mpih-div.c b/lib/mpi/mpih-div.c
index 87ede16..cde1aae 100644
--- a/lib/mpi/mpih-div.c
+++ b/lib/mpi/mpih-div.c
@@ -217,6 +217,10 @@
 	case 0:
 		/* We are asked to divide by zero, so go ahead and do it!  (To make
 		   the compiler not remove this statement, return the value.)  */
+		/*
+		 * existing clients of this function have been modified
+		 * not to call it with dsize == 0, so this should not happen
+		 */
 		return 1 / dsize;
 
 	case 1:
diff --git a/lib/mpi/mpiutil.c b/lib/mpi/mpiutil.c
index eefc55d..26e4ed3 100644
--- a/lib/mpi/mpiutil.c
+++ b/lib/mpi/mpiutil.c
@@ -58,6 +58,9 @@
 {
 	size_t len = nlimbs * sizeof(mpi_limb_t);
 
+	if (!len)
+		return NULL;
+
 	return kmalloc(len, GFP_KERNEL);
 }
 
@@ -135,7 +138,7 @@
 	size_t i;
 	MPI b;
 
-	*copied = MPI_NULL;
+	*copied = NULL;
 
 	if (a) {
 		b = mpi_alloc(a->nlimbs);
diff --git a/mm/memblock.c b/mm/memblock.c
index 2f55f19..77b5f22 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -106,14 +106,17 @@
 	if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
 		end = memblock.current_limit;
 
-	/* adjust @start to avoid underflow and allocating the first page */
-	start = max3(start, size, (phys_addr_t)PAGE_SIZE);
+	/* avoid allocating the first page */
+	start = max_t(phys_addr_t, start, PAGE_SIZE);
 	end = max(start, end);
 
 	for_each_free_mem_range_reverse(i, nid, &this_start, &this_end, NULL) {
 		this_start = clamp(this_start, start, end);
 		this_end = clamp(this_end, start, end);
 
+		if (this_end < size)
+			continue;
+
 		cand = round_down(this_end - size, align);
 		if (cand >= this_start)
 			return cand;
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index 673728a..82c5706 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -59,8 +59,6 @@
 {
 	struct caif_net *caifn;
 	caifn = net_generic(net, caif_net_id);
-	if (!caifn)
-		return NULL;
 	return caifn->cfg;
 }
 EXPORT_SYMBOL(get_cfcnfg);
@@ -69,8 +67,6 @@
 {
 	struct caif_net *caifn;
 	caifn = net_generic(net, caif_net_id);
-	if (!caifn)
-		return NULL;
 	return &caifn->caifdevs;
 }
 
@@ -99,8 +95,6 @@
 	struct caif_device_entry *caifd;
 
 	caifdevs = caif_device_list(dev_net(dev));
-	if (!caifdevs)
-		return NULL;
 
 	caifd = kzalloc(sizeof(*caifd), GFP_KERNEL);
 	if (!caifd)
@@ -120,8 +114,6 @@
 	struct caif_device_entry_list *caifdevs =
 	    caif_device_list(dev_net(dev));
 	struct caif_device_entry *caifd;
-	if (!caifdevs)
-		return NULL;
 
 	list_for_each_entry_rcu(caifd, &caifdevs->list, list) {
 		if (caifd->netdev == dev)
@@ -321,8 +313,6 @@
 	struct caif_device_entry_list *caifdevs;
 
 	caifdevs = caif_device_list(dev_net(dev));
-	if (!cfg || !caifdevs)
-		return;
 	caifd = caif_device_alloc(dev);
 	if (!caifd)
 		return;
@@ -374,8 +364,6 @@
 
 	cfg = get_cfcnfg(dev_net(dev));
 	caifdevs = caif_device_list(dev_net(dev));
-	if (!cfg || !caifdevs)
-		return 0;
 
 	caifd = caif_get(dev);
 	if (caifd == NULL && dev->type != ARPHRD_CAIF)
@@ -507,9 +495,6 @@
 static int caif_init_net(struct net *net)
 {
 	struct caif_net *caifn = net_generic(net, caif_net_id);
-	if (WARN_ON(!caifn))
-		return -EINVAL;
-
 	INIT_LIST_HEAD(&caifn->caifdevs.list);
 	mutex_init(&caifn->caifdevs.lock);
 
@@ -527,9 +512,6 @@
 	    caif_device_list(net);
 	struct cfcnfg *cfg =  get_cfcnfg(net);
 
-	if (!cfg || !caifdevs)
-		return;
-
 	rtnl_lock();
 	mutex_lock(&caifdevs->lock);
 
@@ -569,7 +551,7 @@
 {
 	int result;
 
-	result = register_pernet_device(&caif_net_ops);
+	result = register_pernet_subsys(&caif_net_ops);
 
 	if (result)
 		return result;
@@ -582,7 +564,7 @@
 
 static void __exit caif_device_exit(void)
 {
-	unregister_pernet_device(&caif_net_ops);
+	unregister_pernet_subsys(&caif_net_ops);
 	unregister_netdevice_notifier(&caif_device_notifier);
 	dev_remove_pack(&caif_packet_type);
 }
diff --git a/net/caif/cfcnfg.c b/net/caif/cfcnfg.c
index 598aafb..ba9cfd4 100644
--- a/net/caif/cfcnfg.c
+++ b/net/caif/cfcnfg.c
@@ -309,7 +309,6 @@
 	int err;
 	struct cfctrl_link_param param;
 	struct cfcnfg *cfg = get_cfcnfg(net);
-	caif_assert(cfg != NULL);
 
 	rcu_read_lock();
 	err = caif_connect_req_to_link_param(cfg, conn_req, &param);
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index aefcd7a..0e950fd 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -30,6 +30,20 @@
 
 #define INITIAL_NET_GEN_PTRS	13 /* +1 for len +2 for rcu_head */
 
+static unsigned int max_gen_ptrs = INITIAL_NET_GEN_PTRS;
+
+static struct net_generic *net_alloc_generic(void)
+{
+	struct net_generic *ng;
+	size_t generic_size = offsetof(struct net_generic, ptr[max_gen_ptrs]);
+
+	ng = kzalloc(generic_size, GFP_KERNEL);
+	if (ng)
+		ng->len = max_gen_ptrs;
+
+	return ng;
+}
+
 static int net_assign_generic(struct net *net, int id, void *data)
 {
 	struct net_generic *ng, *old_ng;
@@ -43,8 +57,7 @@
 	if (old_ng->len >= id)
 		goto assign;
 
-	ng = kzalloc(sizeof(struct net_generic) +
-			id * sizeof(void *), GFP_KERNEL);
+	ng = net_alloc_generic();
 	if (ng == NULL)
 		return -ENOMEM;
 
@@ -59,7 +72,6 @@
 	 * the old copy for kfree after a grace period.
 	 */
 
-	ng->len = id;
 	memcpy(&ng->ptr, &old_ng->ptr, old_ng->len * sizeof(void*));
 
 	rcu_assign_pointer(net->gen, ng);
@@ -161,18 +173,6 @@
 	goto out;
 }
 
-static struct net_generic *net_alloc_generic(void)
-{
-	struct net_generic *ng;
-	size_t generic_size = sizeof(struct net_generic) +
-		INITIAL_NET_GEN_PTRS * sizeof(void *);
-
-	ng = kzalloc(generic_size, GFP_KERNEL);
-	if (ng)
-		ng->len = INITIAL_NET_GEN_PTRS;
-
-	return ng;
-}
 
 #ifdef CONFIG_NET_NS
 static struct kmem_cache *net_cachep;
@@ -483,6 +483,7 @@
 			}
 			return error;
 		}
+		max_gen_ptrs = max_t(unsigned int, max_gen_ptrs, *ops->id);
 	}
 	error = __register_pernet_operations(list, ops);
 	if (error) {
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index f16444b..65aebd4 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1509,6 +1509,9 @@
 
 	if (send_addr_notify)
 		call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+	min_ifinfo_dump_size = max_t(u16, if_nlmsg_size(dev),
+				     min_ifinfo_dump_size);
+
 	return err;
 }
 
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 2e4e244..19d66ce 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -123,11 +123,14 @@
 						smallest_size = tb->num_owners;
 						smallest_rover = rover;
 						if (atomic_read(&hashinfo->bsockets) > (high - low) + 1) {
-							spin_unlock(&head->lock);
 							snum = smallest_rover;
-							goto have_snum;
+							goto tb_found;
 						}
 					}
+					if (!inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb)) {
+						snum = rover;
+						goto tb_found;
+					}
 					goto next;
 				}
 			break;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 2b53a1f..6b3ca5b 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -422,6 +422,10 @@
 	if (register_netdevice(dev) < 0)
 		goto failed_free;
 
+	/* Can use a lockless transmit, unless we generate output sequences */
+	if (!(nt->parms.o_flags & GRE_SEQ))
+		dev->features |= NETIF_F_LLTX;
+
 	dev_hold(dev);
 	ipgre_tunnel_link(ign, nt);
 	return nt;
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 4aa7e9d..4cb9cd2 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -814,6 +814,7 @@
 
 	net->ipv4.sysctl_rt_cache_rebuild_count = 4;
 
+	tcp_init_mem(net);
 	limit = nr_free_buffer_pages() / 8;
 	limit = max(limit, 128UL);
 	net->ipv4.sysctl_tcp_mem[0] = limit / 4 * 3;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 9bcdec3..06373b4 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3216,6 +3216,16 @@
 }
 __setup("thash_entries=", set_thash_entries);
 
+void tcp_init_mem(struct net *net)
+{
+	/* Set per-socket limits to no more than 1/128 the pressure threshold */
+	unsigned long limit = nr_free_buffer_pages() / 8;
+	limit = max(limit, 128UL);
+	net->ipv4.sysctl_tcp_mem[0] = limit / 4 * 3;
+	net->ipv4.sysctl_tcp_mem[1] = limit;
+	net->ipv4.sysctl_tcp_mem[2] = net->ipv4.sysctl_tcp_mem[0] * 2;
+}
+
 void __init tcp_init(void)
 {
 	struct sk_buff *skb = NULL;
@@ -3276,9 +3286,9 @@
 	sysctl_tcp_max_orphans = cnt / 2;
 	sysctl_max_syn_backlog = max(128, cnt / 256);
 
-	/* Set per-socket limits to no more than 1/128 the pressure threshold */
-	limit = ((unsigned long)init_net.ipv4.sysctl_tcp_mem[1])
-		<< (PAGE_SHIFT - 7);
+	tcp_init_mem(&init_net);
+	limit = nr_free_buffer_pages() / 8;
+	limit = max(limit, 128UL);
 	max_share = min(4UL*1024*1024, limit);
 
 	sysctl_tcp_wmem[0] = SK_MEM_QUANTUM;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 8c8de27..4ff3b6d 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1141,11 +1141,9 @@
 	sk_mem_uncharge(sk, len);
 	sock_set_flag(sk, SOCK_QUEUE_SHRUNK);
 
-	/* Any change of skb->len requires recalculation of tso
-	 * factor and mss.
-	 */
+	/* Any change of skb->len requires recalculation of tso factor. */
 	if (tcp_skb_pcount(skb) > 1)
-		tcp_set_skb_tso_segs(sk, skb, tcp_current_mss(sk));
+		tcp_set_skb_tso_segs(sk, skb, tcp_skb_mss(skb));
 
 	return 0;
 }
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index d21e7eb..55670ec 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -393,11 +393,6 @@
 {
 	int rc;
 
-	if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb))
-		goto drop;
-
-	nf_reset(skb);
-
 	/* Charge it to the socket, dropping if the queue is full. */
 	rc = sock_queue_rcv_skb(sk, skb);
 	if (rc < 0)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index b3d76b7..a464396 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -106,6 +106,7 @@
 
 	sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
 
+	local->oper_channel = chan;
 	channel_type = ifibss->channel_type;
 	if (channel_type > NL80211_CHAN_HT20 &&
 	    !cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type))
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index e47768c..01a21c2 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1314,6 +1314,7 @@
 			continue;
 		}
 		/* count everything else */
+		sdata->vif.bss_conf.idle = false;
 		count++;
 	}
 
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 1426ec3..75762f3 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -92,6 +92,7 @@
 	if (gcred->acred.group_info != NULL)
 		get_group_info(gcred->acred.group_info);
 	gcred->acred.machine_cred = acred->machine_cred;
+	gcred->acred.principal = acred->principal;
 
 	dprintk("RPC:       allocated %s cred %p for uid %d gid %d\n",
 			gcred->acred.machine_cred ? "machine" : "generic",
@@ -123,6 +124,17 @@
 	call_rcu(&cred->cr_rcu, generic_free_cred_callback);
 }
 
+static int
+machine_cred_match(struct auth_cred *acred, struct generic_cred *gcred, int flags)
+{
+	if (!gcred->acred.machine_cred ||
+	    gcred->acred.principal != acred->principal ||
+	    gcred->acred.uid != acred->uid ||
+	    gcred->acred.gid != acred->gid)
+		return 0;
+	return 1;
+}
+
 /*
  * Match credentials against current process creds.
  */
@@ -132,9 +144,12 @@
 	struct generic_cred *gcred = container_of(cred, struct generic_cred, gc_base);
 	int i;
 
+	if (acred->machine_cred)
+		return machine_cred_match(acred, gcred, flags);
+
 	if (gcred->acred.uid != acred->uid ||
 	    gcred->acred.gid != acred->gid ||
-	    gcred->acred.machine_cred != acred->machine_cred)
+	    gcred->acred.machine_cred != 0)
 		goto out_nomatch;
 
 	/* Optimisation in the case where pointers are identical... */
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index aad8fb6..85d3bb7 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1918,7 +1918,7 @@
 		struct sk_buff *skb;
 
 		unix_state_lock(sk);
-		skb = skb_dequeue(&sk->sk_receive_queue);
+		skb = skb_peek(&sk->sk_receive_queue);
 		if (skb == NULL) {
 			unix_sk(sk)->recursion_level = 0;
 			if (copied >= target)
@@ -1958,11 +1958,8 @@
 		if (check_creds) {
 			/* Never glue messages from different writers */
 			if ((UNIXCB(skb).pid  != siocb->scm->pid) ||
-			    (UNIXCB(skb).cred != siocb->scm->cred)) {
-				skb_queue_head(&sk->sk_receive_queue, skb);
-				sk->sk_data_ready(sk, skb->len);
+			    (UNIXCB(skb).cred != siocb->scm->cred))
 				break;
-			}
 		} else {
 			/* Copy credentials */
 			scm_set_cred(siocb->scm, UNIXCB(skb).pid, UNIXCB(skb).cred);
@@ -1977,8 +1974,6 @@
 
 		chunk = min_t(unsigned int, skb->len, size);
 		if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) {
-			skb_queue_head(&sk->sk_receive_queue, skb);
-			sk->sk_data_ready(sk, skb->len);
 			if (copied == 0)
 				copied = -EFAULT;
 			break;
@@ -1993,13 +1988,10 @@
 			if (UNIXCB(skb).fp)
 				unix_detach_fds(siocb->scm, skb);
 
-			/* put the skb back if we didn't use it up.. */
-			if (skb->len) {
-				skb_queue_head(&sk->sk_receive_queue, skb);
-				sk->sk_data_ready(sk, skb->len);
+			if (skb->len)
 				break;
-			}
 
+			skb_unlink(skb, &sk->sk_receive_queue);
 			consume_skb(skb);
 
 			if (siocb->scm->fp)
@@ -2010,9 +2002,6 @@
 			if (UNIXCB(skb).fp)
 				siocb->scm->fp = scm_fp_dup(UNIXCB(skb).fp);
 
-			/* put message back and return */
-			skb_queue_head(&sk->sk_receive_queue, skb);
-			sk->sk_data_ready(sk, skb->len);
 			break;
 		}
 	} while (size);
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index c0e14b3..e8c9695 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -823,16 +823,6 @@
 }
 ADD_TO_DEVTABLE("spi", struct spi_device_id, do_spi_entry);
 
-/* Looks like: mcp:S */
-static int do_mcp_entry(const char *filename, struct mcp_device_id *id,
-			char *alias)
-{
-	sprintf(alias, MCP_MODULE_PREFIX "%s", id->name);
-
-	return 1;
-}
-ADD_TO_DEVTABLE("mcp", struct mcp_device_id, do_mcp_entry); 
-
 static const struct dmifield {
 	const char *prefix;
 	int field;
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index dac3633..a68aed7 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -441,19 +441,22 @@
 		params = kmalloc(sizeof(*params), GFP_KERNEL);
 		if (!params)
 			return -ENOMEM;
-		if (copy_from_user(params, (void __user *)arg, sizeof(*params)))
-			return -EFAULT;
+		if (copy_from_user(params, (void __user *)arg, sizeof(*params))) {
+			retval = -EFAULT;
+			goto out;
+		}
 		retval = snd_compr_allocate_buffer(stream, params);
 		if (retval) {
-			kfree(params);
-			return -ENOMEM;
+			retval = -ENOMEM;
+			goto out;
 		}
 		retval = stream->ops->set_params(stream, params);
 		if (retval)
 			goto out;
 		stream->runtime->state = SNDRV_PCM_STATE_SETUP;
-	} else
+	} else {
 		return -EPERM;
+	}
 out:
 	kfree(params);
 	return retval;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c95c8bd..0db1dc4 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5586,6 +5586,7 @@
 /* Pin config fixes */
 enum {
 	PINFIX_FSC_AMILO_PI1505,
+	PINFIX_ASUS_A6RP,
 };
 
 static const struct alc_fixup alc861_fixups[] = {
@@ -5597,9 +5598,19 @@
 			{ }
 		}
 	},
+	[PINFIX_ASUS_A6RP] = {
+		.type = ALC_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			/* node 0x0f VREF seems controlling the master output */
+			{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50 },
+			{ }
+		},
+	},
 };
 
 static const struct snd_pci_quirk alc861_fixup_tbl[] = {
+	SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", PINFIX_ASUS_A6RP),
+	SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", PINFIX_ASUS_A6RP),
 	SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505),
 	{}
 };
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 336cfcd..948f0be 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4870,7 +4870,14 @@
 			/* BIOS bug: unfilled OEM string */
 			if (strstr(dev->name, "HP_Mute_LED_P_G")) {
 				set_hp_led_gpio(codec);
-				spec->gpio_led_polarity = 1;
+				switch (codec->subsystem_id) {
+				case 0x103c148a:
+					spec->gpio_led_polarity = 0;
+					break;
+				default:
+					spec->gpio_led_polarity = 1;
+					break;
+				}
 				return 1;
 			}
 		}
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index e57b89e8..94ab728 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -286,17 +286,22 @@
 		snd_card_free(card);
 		return err;
 	}
-	if ((err = snd_ymfpci_pcm_4ch(chip, 2, NULL)) < 0) {
+	err = snd_ymfpci_mixer(chip, rear_switch[dev]);
+	if (err < 0) {
 		snd_card_free(card);
 		return err;
 	}
-	if ((err = snd_ymfpci_pcm2(chip, 3, NULL)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
-	if ((err = snd_ymfpci_mixer(chip, rear_switch[dev])) < 0) {
-		snd_card_free(card);
-		return err;
+	if (chip->ac97->ext_id & AC97_EI_SDAC) {
+		err = snd_ymfpci_pcm_4ch(chip, 2, NULL);
+		if (err < 0) {
+			snd_card_free(card);
+			return err;
+		}
+		err = snd_ymfpci_pcm2(chip, 3, NULL);
+		if (err < 0) {
+			snd_card_free(card);
+			return err;
+		}
 	}
 	if ((err = snd_ymfpci_timer(chip, 0)) < 0) {
 		snd_card_free(card);
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index 03ee4e3..12a9a2b 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -1614,6 +1614,14 @@
 	return change;
 }
 
+static struct snd_kcontrol_new snd_ymfpci_dup4ch __devinitdata = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "4ch Duplication",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_ymfpci_info_dup4ch,
+	.get = snd_ymfpci_get_dup4ch,
+	.put = snd_ymfpci_put_dup4ch,
+};
 
 static struct snd_kcontrol_new snd_ymfpci_controls[] __devinitdata = {
 {
@@ -1642,13 +1650,6 @@
 YMFPCI_SINGLE(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), 0, YDSXGR_SPDIFOUTCTRL, 0),
 YMFPCI_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), 0, YDSXGR_SPDIFINCTRL, 0),
 YMFPCI_SINGLE(SNDRV_CTL_NAME_IEC958("Loop",NONE,NONE), 0, YDSXGR_SPDIFINCTRL, 4),
-{
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "4ch Duplication",
-	.info = snd_ymfpci_info_dup4ch,
-	.get = snd_ymfpci_get_dup4ch,
-	.put = snd_ymfpci_put_dup4ch,
-},
 };
 
 
@@ -1838,6 +1839,12 @@
 		if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_ymfpci_controls[idx], chip))) < 0)
 			return err;
 	}
+	if (chip->ac97->ext_id & AC97_EI_SDAC) {
+		kctl = snd_ctl_new1(&snd_ymfpci_dup4ch, chip);
+		err = snd_ctl_add(chip->card, kctl);
+		if (err < 0)
+			return err;
+	}
 
 	/* add S/PDIF control */
 	if (snd_BUG_ON(!chip->pcm_spdif))
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index ac86d67..7c12650 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -104,7 +104,7 @@
 
 CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 $(CFLAGS_WERROR) $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
 EXTLIBS = -lpthread -lrt -lelf -lm
-ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
 ALL_LDFLAGS = $(LDFLAGS)
 STRIP ?= strip
 
@@ -168,10 +168,7 @@
 
 ### --- END CONFIGURATION SECTION ---
 
-# Those must not be GNU-specific; they are shared with perl/ which may
-# be built by a different compiler. (Note that this is an artifact now
-# but it still might be nice to keep that distinction.)
-BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
+BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
 BASIC_LDFLAGS =
 
 # Guard against environment variables
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index 59d43ab..fb85661 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -20,7 +20,6 @@
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  *
  */
-#define _GNU_SOURCE
 #include <sys/utsname.h>
 #include <sys/types.h>
 #include <sys/stat.h>
@@ -31,7 +30,6 @@
 #include <stdlib.h>
 #include <string.h>
 
-#undef _GNU_SOURCE
 #include "perf.h"
 #include "builtin.h"
 #include "util/util.h"
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 8f80df8..dd162aa 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -89,8 +89,6 @@
 
 static void perf_top__update_print_entries(struct perf_top *top)
 {
-	top->print_entries = top->winsize.ws_row;
-
 	if (top->print_entries > 9)
 		top->print_entries -= 9;
 }
@@ -100,6 +98,13 @@
 	struct perf_top *top = arg;
 
 	get_term_dimensions(&top->winsize);
+	if (!top->print_entries
+	    || (top->print_entries+4) > top->winsize.ws_row) {
+		top->print_entries = top->winsize.ws_row;
+	} else {
+		top->print_entries += 4;
+		top->winsize.ws_row = top->print_entries;
+	}
 	perf_top__update_print_entries(top);
 }
 
@@ -453,8 +458,10 @@
 				};
 				perf_top__sig_winch(SIGWINCH, NULL, top);
 				sigaction(SIGWINCH, &act, NULL);
-			} else
+			} else {
+				perf_top__sig_winch(SIGWINCH, NULL, top);
 				signal(SIGWINCH, SIG_DFL);
+			}
 			break;
 		case 'E':
 			if (top->evlist->nr_entries > 1) {
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 3e7e0b0..ecd7f4d 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -2105,7 +2105,7 @@
 	strncpy(ev.event_type.event_type.name, name, MAX_EVENT_NAME - 1);
 
 	ev.event_type.header.type = PERF_RECORD_HEADER_EVENT_TYPE;
-	size = strlen(name);
+	size = strlen(ev.event_type.event_type.name);
 	size = ALIGN(size, sizeof(u64));
 	ev.event_type.header.size = sizeof(ev.event_type) -
 		(sizeof(ev.event_type.event_type.name) - size);
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index eb25900..29cb654 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -19,7 +19,6 @@
  *
  */
 
-#define _GNU_SOURCE
 #include <sys/utsname.h>
 #include <sys/types.h>
 #include <sys/stat.h>
@@ -33,7 +32,6 @@
 #include <limits.h>
 #include <elf.h>
 
-#undef _GNU_SOURCE
 #include "util.h"
 #include "event.h"
 #include "string.h"
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 215d50f..0975438 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1,4 +1,3 @@
-#define _GNU_SOURCE
 #include <ctype.h>
 #include <dirent.h>
 #include <errno.h>
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index 6c164dc..1a8d4dc 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -21,14 +21,13 @@
  *  The parts for function graph printing was taken and modified from the
  *  Linux Kernel that were written by Frederic Weisbecker.
  */
-#define _GNU_SOURCE
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <ctype.h>
 #include <errno.h>
 
-#undef _GNU_SOURCE
 #include "../perf.h"
 #include "util.h"
 #include "trace-event.h"
diff --git a/tools/perf/util/ui/browsers/hists.c b/tools/perf/util/ui/browsers/hists.c
index 1212a38..e81aef1 100644
--- a/tools/perf/util/ui/browsers/hists.c
+++ b/tools/perf/util/ui/browsers/hists.c
@@ -1,6 +1,4 @@
-#define _GNU_SOURCE
 #include <stdio.h>
-#undef _GNU_SOURCE
 #include "../libslang.h"
 #include <stdlib.h>
 #include <string.h>
diff --git a/tools/perf/util/ui/helpline.c b/tools/perf/util/ui/helpline.c
index 6ef3c56..4f48f59 100644
--- a/tools/perf/util/ui/helpline.c
+++ b/tools/perf/util/ui/helpline.c
@@ -1,4 +1,3 @@
-#define _GNU_SOURCE
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index b9c530c..ecf9898 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -40,7 +40,6 @@
 #define decimal_length(x)	((int)(sizeof(x) * 2.56 + 0.5) + 1)
 
 #define _ALL_SOURCE 1
-#define _GNU_SOURCE 1
 #define _BSD_SOURCE 1
 #define HAS_BOOL