hwmon/f71805f: Add support for "speed mode" fan speed control
In "speed mode", the user specifies a target fan speed (in RPM) and the
chip automatically adjusts the PWM duty cycle (or DC output level) to
reach this target.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 29a3984..975c1cc 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -111,6 +111,7 @@
/* fan nr from 0 to 2 (12-bit values, two registers) */
#define F71805F_REG_FAN(nr) (0x20 + 2 * (nr))
#define F71805F_REG_FAN_LOW(nr) (0x28 + 2 * (nr))
+#define F71805F_REG_FAN_TARGET(nr) (0x69 + 16 * (nr))
#define F71805F_REG_FAN_CTRL(nr) (0x60 + 16 * (nr))
#define F71805F_REG_PWM_FREQ(nr) (0x63 + 16 * (nr))
#define F71805F_REG_PWM_DUTY(nr) (0x6B + 16 * (nr))
@@ -127,6 +128,7 @@
/* individual register bits */
#define FAN_CTRL_SKIP 0x80
#define FAN_CTRL_DC_MODE 0x10
+#define FAN_CTRL_LATCH_FULL 0x08
#define FAN_CTRL_MODE_MASK 0x03
#define FAN_CTRL_MODE_SPEED 0x00
#define FAN_CTRL_MODE_TEMPERATURE 0x01
@@ -153,6 +155,7 @@
u8 in_low[9];
u16 fan[3];
u16 fan_low[3];
+ u16 fan_target[3];
u8 fan_ctrl[3];
u8 pwm[3];
u8 pwm_freq[3];
@@ -324,6 +327,8 @@
continue;
data->fan_low[nr] = f71805f_read16(data,
F71805F_REG_FAN_LOW(nr));
+ data->fan_target[nr] = f71805f_read16(data,
+ F71805F_REG_FAN_TARGET(nr));
data->pwm_freq[nr] = f71805f_read8(data,
F71805F_REG_PWM_FREQ(nr));
}
@@ -510,6 +515,16 @@
return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr]));
}
+static ssize_t show_fan_target(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", fan_from_reg(data->fan_target[nr]));
+}
+
static ssize_t set_fan_min(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
@@ -526,6 +541,23 @@
return count;
}
+static ssize_t set_fan_target(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->fan_target[nr] = fan_to_reg(val);
+ f71805f_write16(data, F71805F_REG_FAN_TARGET(nr),
+ data->fan_target[nr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
char *buf)
{
@@ -822,12 +854,18 @@
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 1);
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan3_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 2);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
@@ -956,11 +994,12 @@
.attrs = f71805f_attributes,
};
-static struct attribute *f71805f_attributes_fan[3][7] = {
+static struct attribute *f71805f_attributes_fan[3][8] = {
{
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_target.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
@@ -969,6 +1008,7 @@
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_target.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
&sensor_dev_attr_pwm2_mode.dev_attr.attr,
@@ -977,6 +1017,7 @@
&sensor_dev_attr_fan3_input.dev_attr.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_target.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
&sensor_dev_attr_pwm3_mode.dev_attr.attr,
@@ -1031,6 +1072,13 @@
for (i = 0; i < 3; i++) {
data->fan_ctrl[i] = f71805f_read8(data,
F71805F_REG_FAN_CTRL(i));
+ /* Clear latch full bit, else "speed mode" fan speed control
+ doesn't work */
+ if (data->fan_ctrl[i] & FAN_CTRL_LATCH_FULL) {
+ data->fan_ctrl[i] &= ~FAN_CTRL_LATCH_FULL;
+ f71805f_write8(data, F71805F_REG_FAN_CTRL(i),
+ data->fan_ctrl[i]);
+ }
}
}