| /* |
| * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> |
| * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/spinlock.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <mach/hardware.h> |
| #include <mach/gpio.h> |
| #include <mach/iomux-mx3.h> |
| |
| /* |
| * IOMUX register (base) addresses |
| */ |
| #define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR) |
| #define IOMUXINT_OBS1 (IOMUX_BASE + 0x000) |
| #define IOMUXINT_OBS2 (IOMUX_BASE + 0x004) |
| #define IOMUXGPR (IOMUX_BASE + 0x008) |
| #define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C) |
| #define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154) |
| |
| static DEFINE_SPINLOCK(gpio_mux_lock); |
| |
| #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) |
| |
| unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; |
| /* |
| * set the mode for a IOMUX pin. |
| */ |
| int mxc_iomux_mode(unsigned int pin_mode) |
| { |
| u32 field, l, mode, ret = 0; |
| void __iomem *reg; |
| |
| reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK); |
| field = pin_mode & 0x3; |
| mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT; |
| |
| spin_lock(&gpio_mux_lock); |
| |
| l = __raw_readl(reg); |
| l &= ~(0xff << (field * 8)); |
| l |= mode << (field * 8); |
| __raw_writel(l, reg); |
| |
| spin_unlock(&gpio_mux_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(mxc_iomux_mode); |
| |
| /* |
| * This function configures the pad value for a IOMUX pin. |
| */ |
| void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) |
| { |
| u32 field, l; |
| void __iomem *reg; |
| |
| pin &= IOMUX_PADNUM_MASK; |
| reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4; |
| field = (pin + 2) % 3; |
| |
| pr_debug("%s: reg offset = 0x%x, field = %d\n", |
| __func__, (pin + 2) / 3, field); |
| |
| spin_lock(&gpio_mux_lock); |
| |
| l = __raw_readl(reg); |
| l &= ~(0x1ff << (field * 10)); |
| l |= config << (field * 10); |
| __raw_writel(l, reg); |
| |
| spin_unlock(&gpio_mux_lock); |
| } |
| EXPORT_SYMBOL(mxc_iomux_set_pad); |
| |
| /* |
| * allocs a single pin: |
| * - reserves the pin so that it is not claimed by another driver |
| * - setups the iomux according to the configuration |
| */ |
| int mxc_iomux_alloc_pin(const unsigned int pin, const char *label) |
| { |
| unsigned pad = pin & IOMUX_PADNUM_MASK; |
| |
| if (pad >= (PIN_MAX + 1)) { |
| printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", |
| pad, label ? label : "?"); |
| return -EINVAL; |
| } |
| |
| if (test_and_set_bit(pad, mxc_pin_alloc_map)) { |
| printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", |
| pad, label ? label : "?"); |
| return -EBUSY; |
| } |
| mxc_iomux_mode(pin); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(mxc_iomux_alloc_pin); |
| |
| int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, |
| const char *label) |
| { |
| unsigned int *p = pin_list; |
| int i; |
| int ret = -EINVAL; |
| |
| for (i = 0; i < count; i++) { |
| ret = mxc_iomux_alloc_pin(*p, label); |
| if (ret) |
| goto setup_error; |
| p++; |
| } |
| return 0; |
| |
| setup_error: |
| mxc_iomux_release_multiple_pins(pin_list, i); |
| return ret; |
| } |
| EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); |
| |
| void mxc_iomux_release_pin(const unsigned int pin) |
| { |
| unsigned pad = pin & IOMUX_PADNUM_MASK; |
| |
| if (pad < (PIN_MAX + 1)) |
| clear_bit(pad, mxc_pin_alloc_map); |
| } |
| EXPORT_SYMBOL(mxc_iomux_release_pin); |
| |
| void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count) |
| { |
| unsigned int *p = pin_list; |
| int i; |
| |
| for (i = 0; i < count; i++) { |
| mxc_iomux_release_pin(*p); |
| p++; |
| } |
| } |
| EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); |
| |
| /* |
| * This function enables/disables the general purpose function for a particular |
| * signal. |
| */ |
| void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) |
| { |
| u32 l; |
| |
| spin_lock(&gpio_mux_lock); |
| l = __raw_readl(IOMUXGPR); |
| if (en) |
| l |= gp; |
| else |
| l &= ~gp; |
| |
| __raw_writel(l, IOMUXGPR); |
| spin_unlock(&gpio_mux_lock); |
| } |
| EXPORT_SYMBOL(mxc_iomux_set_gpr); |