diff --git a/MAINTAINERS b/MAINTAINERS
index 368a718..a9615a5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4110,6 +4110,11 @@
 W:	http://www.polyware.nl/~middelin/hobbies.html
 S:	Maintained
 
+ZS DECSTATION Z85C30 SERIAL DRIVER
+P:	Maciej W. Rozycki
+M:	macro@linux-mips.org
+S:	Maintained
+
 THE REST
 P:	Linus Torvalds
 S:	Buried alive in reporters
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index c1c32e4..a74c087 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -29,6 +29,7 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index c7c9c2a..7a11b90 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -222,6 +222,8 @@
 	  However, when run without a hypervisor the kernel is
 	  theoretically slower.  If in doubt, say N.
 
+source "arch/i386/xen/Kconfig"
+
 config VMI
 	bool "VMI Paravirt-ops support"
 	depends on PARAVIRT
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 181cc29..01f0ff0 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -93,6 +93,9 @@
 mcore-$(CONFIG_X86_ES7000)	:= mach-default
 core-$(CONFIG_X86_ES7000)	:= arch/i386/mach-es7000/
 
+# Xen paravirtualization support
+core-$(CONFIG_XEN)		+= arch/i386/xen/
+
 # default subarch .h files
 mflags-y += -Iinclude/asm-i386/mach-default
 
diff --git a/arch/i386/boot/compressed/relocs.c b/arch/i386/boot/compressed/relocs.c
index ce4fda2..b0e21c3 100644
--- a/arch/i386/boot/compressed/relocs.c
+++ b/arch/i386/boot/compressed/relocs.c
@@ -31,6 +31,8 @@
 		"__kernel_rt_sigreturn",
 		"__kernel_sigreturn",
 		"SYSENTER_RETURN",
+		"xen_irq_disable_direct_reloc",
+		"xen_save_fl_direct_reloc",
 };
 
 static int is_safe_abs_reloc(const char* sym_name)
diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c
index 27a776c..25f7eb5 100644
--- a/arch/i386/kernel/asm-offsets.c
+++ b/arch/i386/kernel/asm-offsets.c
@@ -17,6 +17,8 @@
 #include <asm/thread_info.h>
 #include <asm/elf.h>
 
+#include <xen/interface/xen.h>
+
 #define DEFINE(sym, val) \
         asm volatile("\n->" #sym " %0 " #val : : "i" (val))
 
@@ -59,6 +61,7 @@
 	OFFSET(TI_addr_limit, thread_info, addr_limit);
 	OFFSET(TI_restart_block, thread_info, restart_block);
 	OFFSET(TI_sysenter_return, thread_info, sysenter_return);
+	OFFSET(TI_cpu, thread_info, cpu);
 	BLANK();
 
 	OFFSET(GDS_size, Xgt_desc_struct, size);
@@ -115,4 +118,10 @@
 	OFFSET(PARAVIRT_iret, paravirt_ops, iret);
 	OFFSET(PARAVIRT_read_cr0, paravirt_ops, read_cr0);
 #endif
+
+#ifdef CONFIG_XEN
+	BLANK();
+	OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask);
+	OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
+#endif
 }
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index 3c3c220..32980b8 100644
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -1023,6 +1023,91 @@
 	CFI_ENDPROC
 ENDPROC(kernel_thread_helper)
 
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+	CFI_STARTPROC
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+
+	/* Check to see if we got the event in the critical
+	   region in xen_iret_direct, after we've reenabled
+	   events and checked for pending events.  This simulates
+	   iret instruction's behaviour where it delivers a
+	   pending interrupt when enabling interrupts. */
+	movl PT_EIP(%esp),%eax
+	cmpl $xen_iret_start_crit,%eax
+	jb   1f
+	cmpl $xen_iret_end_crit,%eax
+	jae  1f
+
+	call xen_iret_crit_fixup
+
+1:	mov %esp, %eax
+	call xen_evtchn_do_upcall
+	jmp  ret_from_intr
+	CFI_ENDPROC
+ENDPROC(xen_hypervisor_callback)
+
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+#  1. Fault while reloading DS, ES, FS or GS
+#  2. Fault while executing IRET
+# Category 1 we fix up by reattempting the load, and zeroing the segment
+# register if the load fails.
+# Category 2 we fix up by jumping to do_iret_error. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by maintaining a status value in EAX.
+ENTRY(xen_failsafe_callback)
+	CFI_STARTPROC
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl $1,%eax
+1:	mov 4(%esp),%ds
+2:	mov 8(%esp),%es
+3:	mov 12(%esp),%fs
+4:	mov 16(%esp),%gs
+	testl %eax,%eax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	lea 16(%esp),%esp
+	CFI_ADJUST_CFA_OFFSET -16
+	jz 5f
+	addl $16,%esp
+	jmp iret_exc		# EAX != 0 => Category 2 (Bad IRET)
+5:	pushl $0		# EAX == 0 => Category 1 (Bad segment)
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	jmp ret_from_exception
+	CFI_ENDPROC
+
+.section .fixup,"ax"
+6:	xorl %eax,%eax
+	movl %eax,4(%esp)
+	jmp 1b
+7:	xorl %eax,%eax
+	movl %eax,8(%esp)
+	jmp 2b
+8:	xorl %eax,%eax
+	movl %eax,12(%esp)
+	jmp 3b
+9:	xorl %eax,%eax
+	movl %eax,16(%esp)
+	jmp 4b
+.previous
+.section __ex_table,"a"
+	.align 4
+	.long 1b,6b
+	.long 2b,7b
+	.long 3b,8b
+	.long 4b,9b
+.previous
+ENDPROC(xen_failsafe_callback)
+
+#endif	/* CONFIG_XEN */
+
 .section .rodata,"a"
 #include "syscall_table.S"
 
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
index 8271466..7c52b22 100644
--- a/arch/i386/kernel/head.S
+++ b/arch/i386/kernel/head.S
@@ -510,7 +510,8 @@
 /*
  * BSS section
  */
-.section ".bss.page_aligned","w"
+.section ".bss.page_aligned","wa"
+	.align PAGE_SIZE_asm
 ENTRY(swapper_pg_dir)
 	.fill 1024,4,0
 ENTRY(swapper_pg_pmd)
@@ -538,6 +539,8 @@
 	.ascii "Int %d: CR2 %p  err %p  EIP %p  CS %p  flags %p\n"
 	.asciz "Stack: %p %p %p %p %p %p %p %p\n"
 
+#include "../xen/xen-head.S"
+
 /*
  * The IDT and GDT 'descriptors' are a strange 48-bit object
  * only used by the lidt and lgdt instructions. They are not
diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c
index faab09a..53f07a8 100644
--- a/arch/i386/kernel/paravirt.c
+++ b/arch/i386/kernel/paravirt.c
@@ -228,6 +228,41 @@
 }
 core_initcall(print_banner);
 
+static struct resource reserve_ioports = {
+	.start = 0,
+	.end = IO_SPACE_LIMIT,
+	.name = "paravirt-ioport",
+	.flags = IORESOURCE_IO | IORESOURCE_BUSY,
+};
+
+static struct resource reserve_iomem = {
+	.start = 0,
+	.end = -1,
+	.name = "paravirt-iomem",
+	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
+/*
+ * Reserve the whole legacy IO space to prevent any legacy drivers
+ * from wasting time probing for their hardware.  This is a fairly
+ * brute-force approach to disabling all non-virtual drivers.
+ *
+ * Note that this must be called very early to have any effect.
+ */
+int paravirt_disable_iospace(void)
+{
+	int ret;
+
+	ret = request_resource(&ioport_resource, &reserve_ioports);
+	if (ret == 0) {
+		ret = request_resource(&iomem_resource, &reserve_iomem);
+		if (ret)
+			release_resource(&reserve_ioports);
+	}
+
+	return ret;
+}
+
 struct paravirt_ops paravirt_ops = {
 	.name = "bare hardware",
 	.paravirt_enabled = 0,
@@ -267,7 +302,7 @@
 	.write_msr = native_write_msr_safe,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
-	.get_scheduled_cycles = native_read_tsc,
+	.sched_clock = native_sched_clock,
 	.get_cpu_khz = native_calculate_cpu_khz,
 	.load_tr_desc = native_load_tr_desc,
 	.set_ldt = native_set_ldt,
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 2d61e65..74871d0 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -601,6 +601,8 @@
 	 * NOTE: at this point the bootmem allocator is fully available.
 	 */
 
+	paravirt_post_allocator_init();
+
 	dmi_scan_machine();
 
 #ifdef CONFIG_X86_GENERICARCH
diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c
index 6299c08..2d35d85 100644
--- a/arch/i386/kernel/smp.c
+++ b/arch/i386/kernel/smp.c
@@ -22,6 +22,7 @@
 
 #include <asm/mtrr.h>
 #include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
 #include <mach_apic.h>
 
 /*
@@ -249,13 +250,13 @@
 static DEFINE_SPINLOCK(tlbstate_lock);
 
 /*
- * We cannot call mmdrop() because we are in interrupt context, 
+ * We cannot call mmdrop() because we are in interrupt context,
  * instead update mm->cpu_vm_mask.
  *
  * We need to reload %cr3 since the page tables may be going
  * away from under us..
  */
-static inline void leave_mm (unsigned long cpu)
+void leave_mm(unsigned long cpu)
 {
 	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
 		BUG();
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 0b29545..5910d3f 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -148,7 +148,7 @@
  * a given CPU
  */
 
-static void __cpuinit smp_store_cpu_info(int id)
+void __cpuinit smp_store_cpu_info(int id)
 {
 	struct cpuinfo_x86 *c = cpu_data + id;
 
@@ -308,8 +308,7 @@
 /* representing cpus for which sibling maps can be computed */
 static cpumask_t cpu_sibling_setup_map;
 
-static inline void
-set_cpu_sibling_map(int cpu)
+void set_cpu_sibling_map(int cpu)
 {
 	int i;
 	struct cpuinfo_x86 *c = cpu_data;
@@ -1144,8 +1143,7 @@
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static void
-remove_siblinginfo(int cpu)
+void remove_siblinginfo(int cpu)
 {
 	int sibling;
 	struct cpuinfo_x86 *c = cpu_data;
diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c
index ea63a30..252f901 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -84,7 +84,7 @@
  *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
-static unsigned long cyc2ns_scale __read_mostly;
+unsigned long cyc2ns_scale __read_mostly;
 
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
@@ -93,15 +93,10 @@
 	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
-unsigned long long sched_clock(void)
+unsigned long long native_sched_clock(void)
 {
 	unsigned long long this_offset;
 
@@ -118,12 +113,24 @@
 		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
 
 	/* read the Time Stamp Counter: */
-	get_scheduled_cycles(this_offset);
+	rdtscll(this_offset);
 
 	/* return the value in ns */
 	return cycles_2_ns(this_offset);
 }
 
+/* We need to define a real function for sched_clock, to override the
+   weak default version */
+#ifdef CONFIG_PARAVIRT
+unsigned long long sched_clock(void)
+{
+	return paravirt_sched_clock();
+}
+#else
+unsigned long long sched_clock(void)
+	__attribute__((alias("native_sched_clock")));
+#endif
+
 unsigned long native_calculate_cpu_khz(void)
 {
 	unsigned long long start, end;
diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c
index c12720d..72042bb 100644
--- a/arch/i386/kernel/vmi.c
+++ b/arch/i386/kernel/vmi.c
@@ -362,7 +362,7 @@
 }
 #endif
 
-static void vmi_allocate_pt(u32 pfn)
+static void vmi_allocate_pt(struct mm_struct *mm, u32 pfn)
 {
 	vmi_set_page_type(pfn, VMI_PAGE_L1);
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
@@ -891,7 +891,7 @@
 		paravirt_ops.setup_boot_clock = vmi_time_bsp_init;
 		paravirt_ops.setup_secondary_clock = vmi_time_ap_init;
 #endif
-		paravirt_ops.get_scheduled_cycles = vmi_get_sched_cycles;
+		paravirt_ops.sched_clock = vmi_sched_clock;
  		paravirt_ops.get_cpu_khz = vmi_cpu_khz;
 
 		/* We have true wallclock functions; disable CMOS clock sync */
diff --git a/arch/i386/kernel/vmiclock.c b/arch/i386/kernel/vmiclock.c
index 26a37f8..f9b845f 100644
--- a/arch/i386/kernel/vmiclock.c
+++ b/arch/i386/kernel/vmiclock.c
@@ -64,10 +64,10 @@
 	return 0;
 }
 
-/* paravirt_ops.get_scheduled_cycles = vmi_get_sched_cycles */
-unsigned long long vmi_get_sched_cycles(void)
+/* paravirt_ops.sched_clock = vmi_sched_clock */
+unsigned long long vmi_sched_clock(void)
 {
-	return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE);
+	return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE));
 }
 
 /* paravirt_ops.get_cpu_khz = vmi_cpu_khz */
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S
index aa87b06..00f1bc4 100644
--- a/arch/i386/kernel/vmlinux.lds.S
+++ b/arch/i386/kernel/vmlinux.lds.S
@@ -88,6 +88,7 @@
 
   . = ALIGN(4096);
   .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+	*(.data.page_aligned)
 	*(.data.idt)
   }
 
diff --git a/arch/i386/kernel/vsyscall-note.S b/arch/i386/kernel/vsyscall-note.S
index d4b5be4..271f16a 100644
--- a/arch/i386/kernel/vsyscall-note.S
+++ b/arch/i386/kernel/vsyscall-note.S
@@ -3,23 +3,40 @@
  * Here we can supply some information useful to userland.
  */
 
-#include <linux/uts.h>
 #include <linux/version.h>
+#include <linux/elfnote.h>
 
-#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type)			      \
-	.section name, flags;						      \
-	.balign 4;							      \
-	.long 1f - 0f;		/* name length */			      \
-	.long 3f - 2f;		/* data length */			      \
-	.long type;		/* note type */				      \
-0:	.asciz vendor;		/* vendor name */			      \
-1:	.balign 4;							      \
-2:
-
-#define ASM_ELF_NOTE_END						      \
-3:	.balign 4;		/* pad out section */			      \
-	.previous
-
-	ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
+/* Ideally this would use UTS_NAME, but using a quoted string here
+   doesn't work. Remember to change this when changing the
+   kernel's name. */
+ELFNOTE_START(Linux, 0, "a")
 	.long LINUX_VERSION_CODE
-	ASM_ELF_NOTE_END
+ELFNOTE_END
+
+#ifdef CONFIG_XEN
+
+/*
+ * Add a special note telling glibc's dynamic linker a fake hardware
+ * flavor that it will use to choose the search path for libraries in the
+ * same way it uses real hardware capabilities like "mmx".
+ * We supply "nosegneg" as the fake capability, to indicate that we
+ * do not like negative offsets in instructions using segment overrides,
+ * since we implement those inefficiently.  This makes it possible to
+ * install libraries optimized to avoid those access patterns in someplace
+ * like /lib/i686/tls/nosegneg.  Note that an /etc/ld.so.conf.d/file
+ * corresponding to the bits here is needed to make ldconfig work right.
+ * It should contain:
+ *	hwcap 1 nosegneg
+ * to match the mapping of bit to name that we give here.
+ */
+
+/* Bit used for the pseudo-hwcap for non-negative segments.  We use
+   bit 1 to avoid bugs in some versions of glibc when bit 0 is
+   used; the choice is otherwise arbitrary. */
+#define VDSO_NOTE_NONEGSEG_BIT	1
+
+ELFNOTE_START(GNU, 2, "a")
+	.long 1, 1<<VDSO_NOTE_NONEGSEG_BIT		/* ncaps, mask */
+	.byte VDSO_NOTE_NONEGSEG_BIT; .asciz "nosegneg"	/* bit, name */
+ELFNOTE_END
+#endif
diff --git a/arch/i386/mach-voyager/voyager_thread.c b/arch/i386/mach-voyager/voyager_thread.c
index b4b24e0..f9d5953 100644
--- a/arch/i386/mach-voyager/voyager_thread.c
+++ b/arch/i386/mach-voyager/voyager_thread.c
@@ -52,7 +52,7 @@
 		NULL,
 	};
 
-	if ((ret = call_usermodehelper(argv[0], argv, envp, 1)) != 0) {
+	if ((ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC)) != 0) {
 		printk(KERN_ERR "Voyager failed to run \"%s\": %i\n",
 		       string, ret);
 	}
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index 7135946..6a68b1a 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -87,7 +87,7 @@
 	if (!(pmd_val(*pmd) & _PAGE_PRESENT)) {
 		pte_t *page_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
 
-		paravirt_alloc_pt(__pa(page_table) >> PAGE_SHIFT);
+		paravirt_alloc_pt(&init_mm, __pa(page_table) >> PAGE_SHIFT);
 		set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE));
 		BUG_ON(page_table != pte_offset_kernel(pmd, 0));
 	}
@@ -473,6 +473,7 @@
 
 static int disable_nx __initdata = 0;
 u64 __supported_pte_mask __read_mostly = ~_PAGE_NX;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
 /*
  * noexec = on|off
diff --git a/arch/i386/mm/pageattr.c b/arch/i386/mm/pageattr.c
index 2eb14a7..37992ff 100644
--- a/arch/i386/mm/pageattr.c
+++ b/arch/i386/mm/pageattr.c
@@ -60,7 +60,7 @@
 	address = __pa(address);
 	addr = address & LARGE_PAGE_MASK; 
 	pbase = (pte_t *)page_address(base);
-	paravirt_alloc_pt(page_to_pfn(base));
+	paravirt_alloc_pt(&init_mm, page_to_pfn(base));
 	for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) {
                set_pte(&pbase[i], pfn_pte(addr >> PAGE_SHIFT,
                                           addr == address ? prot : ref_prot));
diff --git a/arch/i386/xen/Kconfig b/arch/i386/xen/Kconfig
new file mode 100644
index 0000000..9df99e1
--- /dev/null
+++ b/arch/i386/xen/Kconfig
@@ -0,0 +1,11 @@
+#
+# This Kconfig describes xen options
+#
+
+config XEN
+	bool "Enable support for Xen hypervisor"
+	depends on PARAVIRT && X86_CMPXCHG && X86_TSC && !NEED_MULTIPLE_NODES
+	help
+	  This is the Linux Xen port.  Enabling this will allow the
+	  kernel to boot in a paravirtualized environment under the
+	  Xen hypervisor.
diff --git a/arch/i386/xen/Makefile b/arch/i386/xen/Makefile
new file mode 100644
index 0000000..343df24
--- /dev/null
+++ b/arch/i386/xen/Makefile
@@ -0,0 +1,4 @@
+obj-y		:= enlighten.o setup.o features.o multicalls.o mmu.o \
+			events.o time.o manage.o xen-asm.o
+
+obj-$(CONFIG_SMP)	+= smp.o
diff --git a/arch/i386/xen/enlighten.c b/arch/i386/xen/enlighten.c
new file mode 100644
index 0000000..9a8c118
--- /dev/null
+++ b/arch/i386/xen/enlighten.c
@@ -0,0 +1,1144 @@
+/*
+ * Core of Xen paravirt_ops implementation.
+ *
+ * This file contains the xen_paravirt_ops structure itself, and the
+ * implementations for:
+ * - privileged instructions
+ * - interrupt flags
+ * - segment operations
+ * - booting and setup
+ *
+ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/preempt.h>
+#include <linux/hardirq.h>
+#include <linux/percpu.h>
+#include <linux/delay.h>
+#include <linux/start_kernel.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/page-flags.h>
+#include <linux/highmem.h>
+#include <linux/smp.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/physdev.h>
+#include <xen/interface/vcpu.h>
+#include <xen/interface/sched.h>
+#include <xen/features.h>
+#include <xen/page.h>
+
+#include <asm/paravirt.h>
+#include <asm/page.h>
+#include <asm/xen/hypercall.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/fixmap.h>
+#include <asm/processor.h>
+#include <asm/setup.h>
+#include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/reboot.h>
+
+#include "xen-ops.h"
+#include "mmu.h"
+#include "multicalls.h"
+
+EXPORT_SYMBOL_GPL(hypercall_page);
+
+DEFINE_PER_CPU(enum paravirt_lazy_mode, xen_lazy_mode);
+
+DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
+DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
+DEFINE_PER_CPU(unsigned long, xen_cr3);
+
+struct start_info *xen_start_info;
+EXPORT_SYMBOL_GPL(xen_start_info);
+
+static /* __initdata */ struct shared_info dummy_shared_info;
+
+/*
+ * Point at some empty memory to start with. We map the real shared_info
+ * page as soon as fixmap is up and running.
+ */
+struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info;
+
+/*
+ * Flag to determine whether vcpu info placement is available on all
+ * VCPUs.  We assume it is to start with, and then set it to zero on
+ * the first failure.  This is because it can succeed on some VCPUs
+ * and not others, since it can involve hypervisor memory allocation,
+ * or because the guest failed to guarantee all the appropriate
+ * constraints on all VCPUs (ie buffer can't cross a page boundary).
+ *
+ * Note that any particular CPU may be using a placed vcpu structure,
+ * but we can only optimise if the all are.
+ *
+ * 0: not available, 1: available
+ */
+static int have_vcpu_info_placement = 1;
+
+static void __init xen_vcpu_setup(int cpu)
+{
+	struct vcpu_register_vcpu_info info;
+	int err;
+	struct vcpu_info *vcpup;
+
+	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+
+	if (!have_vcpu_info_placement)
+		return;		/* already tested, not available */
+
+	vcpup = &per_cpu(xen_vcpu_info, cpu);
+
+	info.mfn = virt_to_mfn(vcpup);
+	info.offset = offset_in_page(vcpup);
+
+	printk(KERN_DEBUG "trying to map vcpu_info %d at %p, mfn %x, offset %d\n",
+	       cpu, vcpup, info.mfn, info.offset);
+
+	/* Check to see if the hypervisor will put the vcpu_info
+	   structure where we want it, which allows direct access via
+	   a percpu-variable. */
+	err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info);
+
+	if (err) {
+		printk(KERN_DEBUG "register_vcpu_info failed: err=%d\n", err);
+		have_vcpu_info_placement = 0;
+	} else {
+		/* This cpu is using the registered vcpu info, even if
+		   later ones fail to. */
+		per_cpu(xen_vcpu, cpu) = vcpup;
+
+		printk(KERN_DEBUG "cpu %d using vcpu_info at %p\n",
+		       cpu, vcpup);
+	}
+}
+
+static void __init xen_banner(void)
+{
+	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
+	       paravirt_ops.name);
+	printk(KERN_INFO "Hypervisor signature: %s\n", xen_start_info->magic);
+}
+
+static void xen_cpuid(unsigned int *eax, unsigned int *ebx,
+		      unsigned int *ecx, unsigned int *edx)
+{
+	unsigned maskedx = ~0;
+
+	/*
+	 * Mask out inconvenient features, to try and disable as many
+	 * unsupported kernel subsystems as possible.
+	 */
+	if (*eax == 1)
+		maskedx = ~((1 << X86_FEATURE_APIC) |  /* disable APIC */
+			    (1 << X86_FEATURE_ACPI) |  /* disable ACPI */
+			    (1 << X86_FEATURE_ACC));   /* thermal monitoring */
+
+	asm(XEN_EMULATE_PREFIX "cpuid"
+		: "=a" (*eax),
+		  "=b" (*ebx),
+		  "=c" (*ecx),
+		  "=d" (*edx)
+		: "0" (*eax), "2" (*ecx));
+	*edx &= maskedx;
+}
+
+static void xen_set_debugreg(int reg, unsigned long val)
+{
+	HYPERVISOR_set_debugreg(reg, val);
+}
+
+static unsigned long xen_get_debugreg(int reg)
+{
+	return HYPERVISOR_get_debugreg(reg);
+}
+
+static unsigned long xen_save_fl(void)
+{
+	struct vcpu_info *vcpu;
+	unsigned long flags;
+
+	vcpu = x86_read_percpu(xen_vcpu);
+
+	/* flag has opposite sense of mask */
+	flags = !vcpu->evtchn_upcall_mask;
+
+	/* convert to IF type flag
+	   -0 -> 0x00000000
+	   -1 -> 0xffffffff
+	*/
+	return (-flags) & X86_EFLAGS_IF;
+}
+
+static void xen_restore_fl(unsigned long flags)
+{
+	struct vcpu_info *vcpu;
+
+	/* convert from IF type flag */
+	flags = !(flags & X86_EFLAGS_IF);
+
+	/* There's a one instruction preempt window here.  We need to
+	   make sure we're don't switch CPUs between getting the vcpu
+	   pointer and updating the mask. */
+	preempt_disable();
+	vcpu = x86_read_percpu(xen_vcpu);
+	vcpu->evtchn_upcall_mask = flags;
+	preempt_enable_no_resched();
+
+	/* Doesn't matter if we get preempted here, because any
+	   pending event will get dealt with anyway. */
+
+	if (flags == 0) {
+		preempt_check_resched();
+		barrier(); /* unmask then check (avoid races) */
+		if (unlikely(vcpu->evtchn_upcall_pending))
+			force_evtchn_callback();
+	}
+}
+
+static void xen_irq_disable(void)
+{
+	/* There's a one instruction preempt window here.  We need to
+	   make sure we're don't switch CPUs between getting the vcpu
+	   pointer and updating the mask. */
+	preempt_disable();
+	x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1;
+	preempt_enable_no_resched();
+}
+
+static void xen_irq_enable(void)
+{
+	struct vcpu_info *vcpu;
+
+	/* There's a one instruction preempt window here.  We need to
+	   make sure we're don't switch CPUs between getting the vcpu
+	   pointer and updating the mask. */
+	preempt_disable();
+	vcpu = x86_read_percpu(xen_vcpu);
+	vcpu->evtchn_upcall_mask = 0;
+	preempt_enable_no_resched();
+
+	/* Doesn't matter if we get preempted here, because any
+	   pending event will get dealt with anyway. */
+
+	barrier(); /* unmask then check (avoid races) */
+	if (unlikely(vcpu->evtchn_upcall_pending))
+		force_evtchn_callback();
+}
+
+static void xen_safe_halt(void)
+{
+	/* Blocking includes an implicit local_irq_enable(). */
+	if (HYPERVISOR_sched_op(SCHEDOP_block, 0) != 0)
+		BUG();
+}
+
+static void xen_halt(void)
+{
+	if (irqs_disabled())
+		HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
+	else
+		xen_safe_halt();
+}
+
+static void xen_set_lazy_mode(enum paravirt_lazy_mode mode)
+{
+	BUG_ON(preemptible());
+
+	switch (mode) {
+	case PARAVIRT_LAZY_NONE:
+		BUG_ON(x86_read_percpu(xen_lazy_mode) == PARAVIRT_LAZY_NONE);
+		break;
+
+	case PARAVIRT_LAZY_MMU:
+	case PARAVIRT_LAZY_CPU:
+		BUG_ON(x86_read_percpu(xen_lazy_mode) != PARAVIRT_LAZY_NONE);
+		break;
+
+	case PARAVIRT_LAZY_FLUSH:
+		/* flush if necessary, but don't change state */
+		if (x86_read_percpu(xen_lazy_mode) != PARAVIRT_LAZY_NONE)
+			xen_mc_flush();
+		return;
+	}
+
+	xen_mc_flush();
+	x86_write_percpu(xen_lazy_mode, mode);
+}
+
+static unsigned long xen_store_tr(void)
+{
+	return 0;
+}
+
+static void xen_set_ldt(const void *addr, unsigned entries)
+{
+	unsigned long linear_addr = (unsigned long)addr;
+	struct mmuext_op *op;
+	struct multicall_space mcs = xen_mc_entry(sizeof(*op));
+
+	op = mcs.args;
+	op->cmd = MMUEXT_SET_LDT;
+	if (linear_addr) {
+		/* ldt my be vmalloced, use arbitrary_virt_to_machine */
+		xmaddr_t maddr;
+		maddr = arbitrary_virt_to_machine((unsigned long)addr);
+		linear_addr = (unsigned long)maddr.maddr;
+	}
+	op->arg1.linear_addr = linear_addr;
+	op->arg2.nr_ents = entries;
+
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
+static void xen_load_gdt(const struct Xgt_desc_struct *dtr)
+{
+	unsigned long *frames;
+	unsigned long va = dtr->address;
+	unsigned int size = dtr->size + 1;
+	unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+	int f;
+	struct multicall_space mcs;
+
+	/* A GDT can be up to 64k in size, which corresponds to 8192
+	   8-byte entries, or 16 4k pages.. */
+
+	BUG_ON(size > 65536);
+	BUG_ON(va & ~PAGE_MASK);
+
+	mcs = xen_mc_entry(sizeof(*frames) * pages);
+	frames = mcs.args;
+
+	for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
+		frames[f] = virt_to_mfn(va);
+		make_lowmem_page_readonly((void *)va);
+	}
+
+	MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct));
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
+static void load_TLS_descriptor(struct thread_struct *t,
+				unsigned int cpu, unsigned int i)
+{
+	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+	xmaddr_t maddr = virt_to_machine(&gdt[GDT_ENTRY_TLS_MIN+i]);
+	struct multicall_space mc = __xen_mc_entry(0);
+
+	MULTI_update_descriptor(mc.mc, maddr.maddr, t->tls_array[i]);
+}
+
+static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
+{
+	xen_mc_batch();
+
+	load_TLS_descriptor(t, cpu, 0);
+	load_TLS_descriptor(t, cpu, 1);
+	load_TLS_descriptor(t, cpu, 2);
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+
+	/*
+	 * XXX sleazy hack: If we're being called in a lazy-cpu zone,
+	 * it means we're in a context switch, and %gs has just been
+	 * saved.  This means we can zero it out to prevent faults on
+	 * exit from the hypervisor if the next process has no %gs.
+	 * Either way, it has been saved, and the new value will get
+	 * loaded properly.  This will go away as soon as Xen has been
+	 * modified to not save/restore %gs for normal hypercalls.
+	 */
+	if (xen_get_lazy_mode() == PARAVIRT_LAZY_CPU)
+		loadsegment(gs, 0);
+}
+
+static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
+				u32 low, u32 high)
+{
+	unsigned long lp = (unsigned long)&dt[entrynum];
+	xmaddr_t mach_lp = virt_to_machine(lp);
+	u64 entry = (u64)high << 32 | low;
+
+	preempt_disable();
+
+	xen_mc_flush();
+	if (HYPERVISOR_update_descriptor(mach_lp.maddr, entry))
+		BUG();
+
+	preempt_enable();
+}
+
+static int cvt_gate_to_trap(int vector, u32 low, u32 high,
+			    struct trap_info *info)
+{
+	u8 type, dpl;
+
+	type = (high >> 8) & 0x1f;
+	dpl = (high >> 13) & 3;
+
+	if (type != 0xf && type != 0xe)
+		return 0;
+
+	info->vector = vector;
+	info->address = (high & 0xffff0000) | (low & 0x0000ffff);
+	info->cs = low >> 16;
+	info->flags = dpl;
+	/* interrupt gates clear IF */
+	if (type == 0xe)
+		info->flags |= 4;
+
+	return 1;
+}
+
+/* Locations of each CPU's IDT */
+static DEFINE_PER_CPU(struct Xgt_desc_struct, idt_desc);
+
+/* Set an IDT entry.  If the entry is part of the current IDT, then
+   also update Xen. */
+static void xen_write_idt_entry(struct desc_struct *dt, int entrynum,
+				u32 low, u32 high)
+{
+	unsigned long p = (unsigned long)&dt[entrynum];
+	unsigned long start, end;
+
+	preempt_disable();
+
+	start = __get_cpu_var(idt_desc).address;
+	end = start + __get_cpu_var(idt_desc).size + 1;
+
+	xen_mc_flush();
+
+	write_dt_entry(dt, entrynum, low, high);
+
+	if (p >= start && (p + 8) <= end) {
+		struct trap_info info[2];
+
+		info[1].address = 0;
+
+		if (cvt_gate_to_trap(entrynum, low, high, &info[0]))
+			if (HYPERVISOR_set_trap_table(info))
+				BUG();
+	}
+
+	preempt_enable();
+}
+
+static void xen_convert_trap_info(const struct Xgt_desc_struct *desc,
+				  struct trap_info *traps)
+{
+	unsigned in, out, count;
+
+	count = (desc->size+1) / 8;
+	BUG_ON(count > 256);
+
+	for (in = out = 0; in < count; in++) {
+		const u32 *entry = (u32 *)(desc->address + in * 8);
+
+		if (cvt_gate_to_trap(in, entry[0], entry[1], &traps[out]))
+			out++;
+	}
+	traps[out].address = 0;
+}
+
+void xen_copy_trap_info(struct trap_info *traps)
+{
+	const struct Xgt_desc_struct *desc = &__get_cpu_var(idt_desc);
+
+	xen_convert_trap_info(desc, traps);
+}
+
+/* Load a new IDT into Xen.  In principle this can be per-CPU, so we
+   hold a spinlock to protect the static traps[] array (static because
+   it avoids allocation, and saves stack space). */
+static void xen_load_idt(const struct Xgt_desc_struct *desc)
+{
+	static DEFINE_SPINLOCK(lock);
+	static struct trap_info traps[257];
+
+	spin_lock(&lock);
+
+	__get_cpu_var(idt_desc) = *desc;
+
+	xen_convert_trap_info(desc, traps);
+
+	xen_mc_flush();
+	if (HYPERVISOR_set_trap_table(traps))
+		BUG();
+
+	spin_unlock(&lock);
+}
+
+/* Write a GDT descriptor entry.  Ignore LDT descriptors, since
+   they're handled differently. */
+static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
+				u32 low, u32 high)
+{
+	preempt_disable();
+
+	switch ((high >> 8) & 0xff) {
+	case DESCTYPE_LDT:
+	case DESCTYPE_TSS:
+		/* ignore */
+		break;
+
+	default: {
+		xmaddr_t maddr = virt_to_machine(&dt[entry]);
+		u64 desc = (u64)high << 32 | low;
+
+		xen_mc_flush();
+		if (HYPERVISOR_update_descriptor(maddr.maddr, desc))
+			BUG();
+	}
+
+	}
+
+	preempt_enable();
+}
+
+static void xen_load_esp0(struct tss_struct *tss,
+			  struct thread_struct *thread)
+{
+	struct multicall_space mcs = xen_mc_entry(0);
+	MULTI_stack_switch(mcs.mc, __KERNEL_DS, thread->esp0);
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
+static void xen_set_iopl_mask(unsigned mask)
+{
+	struct physdev_set_iopl set_iopl;
+
+	/* Force the change at ring 0. */
+	set_iopl.iopl = (mask == 0) ? 1 : (mask >> 12) & 3;
+	HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+}
+
+static void xen_io_delay(void)
+{
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static unsigned long xen_apic_read(unsigned long reg)
+{
+	return 0;
+}
+
+static void xen_apic_write(unsigned long reg, unsigned long val)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+#endif
+
+static void xen_flush_tlb(void)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs = xen_mc_entry(sizeof(*op));
+
+	op = mcs.args;
+	op->cmd = MMUEXT_TLB_FLUSH_LOCAL;
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+
+static void xen_flush_tlb_single(unsigned long addr)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs = xen_mc_entry(sizeof(*op));
+
+	op = mcs.args;
+	op->cmd = MMUEXT_INVLPG_LOCAL;
+	op->arg1.linear_addr = addr & PAGE_MASK;
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+
+static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm,
+				 unsigned long va)
+{
+	struct {
+		struct mmuext_op op;
+		cpumask_t mask;
+	} *args;
+	cpumask_t cpumask = *cpus;
+	struct multicall_space mcs;
+
+	/*
+	 * A couple of (to be removed) sanity checks:
+	 *
+	 * - current CPU must not be in mask
+	 * - mask must exist :)
+	 */
+	BUG_ON(cpus_empty(cpumask));
+	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+	BUG_ON(!mm);
+
+	/* If a CPU which we ran on has gone down, OK. */
+	cpus_and(cpumask, cpumask, cpu_online_map);
+	if (cpus_empty(cpumask))
+		return;
+
+	mcs = xen_mc_entry(sizeof(*args));
+	args = mcs.args;
+	args->mask = cpumask;
+	args->op.arg2.vcpumask = &args->mask;
+
+	if (va == TLB_FLUSH_ALL) {
+		args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
+	} else {
+		args->op.cmd = MMUEXT_INVLPG_MULTI;
+		args->op.arg1.linear_addr = va;
+	}
+
+	MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+
+static void xen_write_cr2(unsigned long cr2)
+{
+	x86_read_percpu(xen_vcpu)->arch.cr2 = cr2;
+}
+
+static unsigned long xen_read_cr2(void)
+{
+	return x86_read_percpu(xen_vcpu)->arch.cr2;
+}
+
+static unsigned long xen_read_cr2_direct(void)
+{
+	return x86_read_percpu(xen_vcpu_info.arch.cr2);
+}
+
+static void xen_write_cr4(unsigned long cr4)
+{
+	/* never allow TSC to be disabled */
+	native_write_cr4(cr4 & ~X86_CR4_TSD);
+}
+
+static unsigned long xen_read_cr3(void)
+{
+	return x86_read_percpu(xen_cr3);
+}
+
+static void xen_write_cr3(unsigned long cr3)
+{
+	BUG_ON(preemptible());
+
+	if (cr3 == x86_read_percpu(xen_cr3)) {
+		/* just a simple tlb flush */
+		xen_flush_tlb();
+		return;
+	}
+
+	x86_write_percpu(xen_cr3, cr3);
+
+
+	{
+		struct mmuext_op *op;
+		struct multicall_space mcs = xen_mc_entry(sizeof(*op));
+		unsigned long mfn = pfn_to_mfn(PFN_DOWN(cr3));
+
+		op = mcs.args;
+		op->cmd = MMUEXT_NEW_BASEPTR;
+		op->arg1.mfn = mfn;
+
+		MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+		xen_mc_issue(PARAVIRT_LAZY_CPU);
+	}
+}
+
+/* Early in boot, while setting up the initial pagetable, assume
+   everything is pinned. */
+static __init void xen_alloc_pt_init(struct mm_struct *mm, u32 pfn)
+{
+	BUG_ON(mem_map);	/* should only be used early */
+	make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+}
+
+/* This needs to make sure the new pte page is pinned iff its being
+   attached to a pinned pagetable. */
+static void xen_alloc_pt(struct mm_struct *mm, u32 pfn)
+{
+	struct page *page = pfn_to_page(pfn);
+
+	if (PagePinned(virt_to_page(mm->pgd))) {
+		SetPagePinned(page);
+
+		if (!PageHighMem(page))
+			make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+		else
+			/* make sure there are no stray mappings of
+			   this page */
+			kmap_flush_unused();
+	}
+}
+
+/* This should never happen until we're OK to use struct page */
+static void xen_release_pt(u32 pfn)
+{
+	struct page *page = pfn_to_page(pfn);
+
+	if (PagePinned(page)) {
+		if (!PageHighMem(page))
+			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
+	}
+}
+
+#ifdef CONFIG_HIGHPTE
+static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
+{
+	pgprot_t prot = PAGE_KERNEL;
+
+	if (PagePinned(page))
+		prot = PAGE_KERNEL_RO;
+
+	if (0 && PageHighMem(page))
+		printk("mapping highpte %lx type %d prot %s\n",
+		       page_to_pfn(page), type,
+		       (unsigned long)pgprot_val(prot) & _PAGE_RW ? "WRITE" : "READ");
+
+	return kmap_atomic_prot(page, type, prot);
+}
+#endif
+
+static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
+{
+	/* If there's an existing pte, then don't allow _PAGE_RW to be set */
+	if (pte_val_ma(*ptep) & _PAGE_PRESENT)
+		pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) &
+			       pte_val_ma(pte));
+
+	return pte;
+}
+
+/* Init-time set_pte while constructing initial pagetables, which
+   doesn't allow RO pagetable pages to be remapped RW */
+static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
+{
+	pte = mask_rw_pte(ptep, pte);
+
+	xen_set_pte(ptep, pte);
+}
+
+static __init void xen_pagetable_setup_start(pgd_t *base)
+{
+	pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base;
+
+	/* special set_pte for pagetable initialization */
+	paravirt_ops.set_pte = xen_set_pte_init;
+
+	init_mm.pgd = base;
+	/*
+	 * copy top-level of Xen-supplied pagetable into place.	 For
+	 * !PAE we can use this as-is, but for PAE it is a stand-in
+	 * while we copy the pmd pages.
+	 */
+	memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t));
+
+	if (PTRS_PER_PMD > 1) {
+		int i;
+		/*
+		 * For PAE, need to allocate new pmds, rather than
+		 * share Xen's, since Xen doesn't like pmd's being
+		 * shared between address spaces.
+		 */
+		for (i = 0; i < PTRS_PER_PGD; i++) {
+			if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
+				pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+
+				memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
+				       PAGE_SIZE);
+
+				make_lowmem_page_readonly(pmd);
+
+				set_pgd(&base[i], __pgd(1 + __pa(pmd)));
+			} else
+				pgd_clear(&base[i]);
+		}
+	}
+
+	/* make sure zero_page is mapped RO so we can use it in pagetables */
+	make_lowmem_page_readonly(empty_zero_page);
+	make_lowmem_page_readonly(base);
+	/*
+	 * Switch to new pagetable.  This is done before
+	 * pagetable_init has done anything so that the new pages
+	 * added to the table can be prepared properly for Xen.
+	 */
+	xen_write_cr3(__pa(base));
+}
+
+static __init void xen_pagetable_setup_done(pgd_t *base)
+{
+	/* This will work as long as patching hasn't happened yet
+	   (which it hasn't) */
+	paravirt_ops.alloc_pt = xen_alloc_pt;
+	paravirt_ops.set_pte = xen_set_pte;
+
+	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+		/*
+		 * Create a mapping for the shared info page.
+		 * Should be set_fixmap(), but shared_info is a machine
+		 * address with no corresponding pseudo-phys address.
+		 */
+		set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
+			    PFN_DOWN(xen_start_info->shared_info),
+			    PAGE_KERNEL);
+
+		HYPERVISOR_shared_info =
+			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
+
+	} else
+		HYPERVISOR_shared_info =
+			(struct shared_info *)__va(xen_start_info->shared_info);
+
+	/* Actually pin the pagetable down, but we can't set PG_pinned
+	   yet because the page structures don't exist yet. */
+	{
+		struct mmuext_op op;
+#ifdef CONFIG_X86_PAE
+		op.cmd = MMUEXT_PIN_L3_TABLE;
+#else
+		op.cmd = MMUEXT_PIN_L3_TABLE;
+#endif
+		op.arg1.mfn = pfn_to_mfn(PFN_DOWN(__pa(base)));
+		if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
+			BUG();
+	}
+}
+
+/* This is called once we have the cpu_possible_map */
+void __init xen_setup_vcpu_info_placement(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		xen_vcpu_setup(cpu);
+
+	/* xen_vcpu_setup managed to place the vcpu_info within the
+	   percpu area for all cpus, so make use of it */
+	if (have_vcpu_info_placement) {
+		printk(KERN_INFO "Xen: using vcpu_info placement\n");
+
+		paravirt_ops.save_fl = xen_save_fl_direct;
+		paravirt_ops.restore_fl = xen_restore_fl_direct;
+		paravirt_ops.irq_disable = xen_irq_disable_direct;
+		paravirt_ops.irq_enable = xen_irq_enable_direct;
+		paravirt_ops.read_cr2 = xen_read_cr2_direct;
+		paravirt_ops.iret = xen_iret_direct;
+	}
+}
+
+static unsigned xen_patch(u8 type, u16 clobbers, void *insns, unsigned len)
+{
+	char *start, *end, *reloc;
+	unsigned ret;
+
+	start = end = reloc = NULL;
+
+#define SITE(x)								\
+	case PARAVIRT_PATCH(x):						\
+	if (have_vcpu_info_placement) {					\
+		start = (char *)xen_##x##_direct;			\
+		end = xen_##x##_direct_end;				\
+		reloc = xen_##x##_direct_reloc;				\
+	}								\
+	goto patch_site
+
+	switch (type) {
+		SITE(irq_enable);
+		SITE(irq_disable);
+		SITE(save_fl);
+		SITE(restore_fl);
+#undef SITE
+
+	patch_site:
+		if (start == NULL || (end-start) > len)
+			goto default_patch;
+
+		ret = paravirt_patch_insns(insns, len, start, end);
+
+		/* Note: because reloc is assigned from something that
+		   appears to be an array, gcc assumes it's non-null,
+		   but doesn't know its relationship with start and
+		   end. */
+		if (reloc > start && reloc < end) {
+			int reloc_off = reloc - start;
+			long *relocp = (long *)(insns + reloc_off);
+			long delta = start - (char *)insns;
+
+			*relocp += delta;
+		}
+		break;
+
+	default_patch:
+	default:
+		ret = paravirt_patch_default(type, clobbers, insns, len);
+		break;
+	}
+
+	return ret;
+}
+
+static const struct paravirt_ops xen_paravirt_ops __initdata = {
+	.paravirt_enabled = 1,
+	.shared_kernel_pmd = 0,
+
+	.name = "Xen",
+	.banner = xen_banner,
+
+	.patch = xen_patch,
+
+	.memory_setup = xen_memory_setup,
+	.arch_setup = xen_arch_setup,
+	.init_IRQ = xen_init_IRQ,
+	.post_allocator_init = xen_mark_init_mm_pinned,
+
+	.time_init = xen_time_init,
+	.set_wallclock = xen_set_wallclock,
+	.get_wallclock = xen_get_wallclock,
+	.get_cpu_khz = xen_cpu_khz,
+	.sched_clock = xen_sched_clock,
+
+	.cpuid = xen_cpuid,
+
+	.set_debugreg = xen_set_debugreg,
+	.get_debugreg = xen_get_debugreg,
+
+	.clts = native_clts,
+
+	.read_cr0 = native_read_cr0,
+	.write_cr0 = native_write_cr0,
+
+	.read_cr2 = xen_read_cr2,
+	.write_cr2 = xen_write_cr2,
+
+	.read_cr3 = xen_read_cr3,
+	.write_cr3 = xen_write_cr3,
+
+	.read_cr4 = native_read_cr4,
+	.read_cr4_safe = native_read_cr4_safe,
+	.write_cr4 = xen_write_cr4,
+
+	.save_fl = xen_save_fl,
+	.restore_fl = xen_restore_fl,
+	.irq_disable = xen_irq_disable,
+	.irq_enable = xen_irq_enable,
+	.safe_halt = xen_safe_halt,
+	.halt = xen_halt,
+	.wbinvd = native_wbinvd,
+
+	.read_msr = native_read_msr_safe,
+	.write_msr = native_write_msr_safe,
+	.read_tsc = native_read_tsc,
+	.read_pmc = native_read_pmc,
+
+	.iret = (void *)&hypercall_page[__HYPERVISOR_iret],
+	.irq_enable_sysexit = NULL,  /* never called */
+
+	.load_tr_desc = paravirt_nop,
+	.set_ldt = xen_set_ldt,
+	.load_gdt = xen_load_gdt,
+	.load_idt = xen_load_idt,
+	.load_tls = xen_load_tls,
+
+	.store_gdt = native_store_gdt,
+	.store_idt = native_store_idt,
+	.store_tr = xen_store_tr,
+
+	.write_ldt_entry = xen_write_ldt_entry,
+	.write_gdt_entry = xen_write_gdt_entry,
+	.write_idt_entry = xen_write_idt_entry,
+	.load_esp0 = xen_load_esp0,
+
+	.set_iopl_mask = xen_set_iopl_mask,
+	.io_delay = xen_io_delay,
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	.apic_write = xen_apic_write,
+	.apic_write_atomic = xen_apic_write,
+	.apic_read = xen_apic_read,
+	.setup_boot_clock = paravirt_nop,
+	.setup_secondary_clock = paravirt_nop,
+	.startup_ipi_hook = paravirt_nop,
+#endif
+
+	.flush_tlb_user = xen_flush_tlb,
+	.flush_tlb_kernel = xen_flush_tlb,
+	.flush_tlb_single = xen_flush_tlb_single,
+	.flush_tlb_others = xen_flush_tlb_others,
+
+	.pte_update = paravirt_nop,
+	.pte_update_defer = paravirt_nop,
+
+	.pagetable_setup_start = xen_pagetable_setup_start,
+	.pagetable_setup_done = xen_pagetable_setup_done,
+
+	.alloc_pt = xen_alloc_pt_init,
+	.release_pt = xen_release_pt,
+	.alloc_pd = paravirt_nop,
+	.alloc_pd_clone = paravirt_nop,
+	.release_pd = paravirt_nop,
+
+#ifdef CONFIG_HIGHPTE
+	.kmap_atomic_pte = xen_kmap_atomic_pte,
+#endif
+
+	.set_pte = NULL,	/* see xen_pagetable_setup_* */
+	.set_pte_at = xen_set_pte_at,
+	.set_pmd = xen_set_pmd,
+
+	.pte_val = xen_pte_val,
+	.pgd_val = xen_pgd_val,
+
+	.make_pte = xen_make_pte,
+	.make_pgd = xen_make_pgd,
+
+#ifdef CONFIG_X86_PAE
+	.set_pte_atomic = xen_set_pte_atomic,
+	.set_pte_present = xen_set_pte_at,
+	.set_pud = xen_set_pud,
+	.pte_clear = xen_pte_clear,
+	.pmd_clear = xen_pmd_clear,
+
+	.make_pmd = xen_make_pmd,
+	.pmd_val = xen_pmd_val,
+#endif	/* PAE */
+
+	.activate_mm = xen_activate_mm,
+	.dup_mmap = xen_dup_mmap,
+	.exit_mmap = xen_exit_mmap,
+
+	.set_lazy_mode = xen_set_lazy_mode,
+};
+
+#ifdef CONFIG_SMP
+static const struct smp_ops xen_smp_ops __initdata = {
+	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
+	.smp_prepare_cpus = xen_smp_prepare_cpus,
+	.cpu_up = xen_cpu_up,
+	.smp_cpus_done = xen_smp_cpus_done,
+
+	.smp_send_stop = xen_smp_send_stop,
+	.smp_send_reschedule = xen_smp_send_reschedule,
+	.smp_call_function_mask = xen_smp_call_function_mask,
+};
+#endif	/* CONFIG_SMP */
+
+static void xen_reboot(int reason)
+{
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+
+	if (HYPERVISOR_sched_op(SCHEDOP_shutdown, reason))
+		BUG();
+}
+
+static void xen_restart(char *msg)
+{
+	xen_reboot(SHUTDOWN_reboot);
+}
+
+static void xen_emergency_restart(void)
+{
+	xen_reboot(SHUTDOWN_reboot);
+}
+
+static void xen_machine_halt(void)
+{
+	xen_reboot(SHUTDOWN_poweroff);
+}
+
+static void xen_crash_shutdown(struct pt_regs *regs)
+{
+	xen_reboot(SHUTDOWN_crash);
+}
+
+static const struct machine_ops __initdata xen_machine_ops = {
+	.restart = xen_restart,
+	.halt = xen_machine_halt,
+	.power_off = xen_machine_halt,
+	.shutdown = xen_machine_halt,
+	.crash_shutdown = xen_crash_shutdown,
+	.emergency_restart = xen_emergency_restart,
+};
+
+
+/* First C function to be called on Xen boot */
+asmlinkage void __init xen_start_kernel(void)
+{
+	pgd_t *pgd;
+
+	if (!xen_start_info)
+		return;
+
+	BUG_ON(memcmp(xen_start_info->magic, "xen-3.0", 7) != 0);
+
+	/* Install Xen paravirt ops */
+	paravirt_ops = xen_paravirt_ops;
+	machine_ops = xen_machine_ops;
+
+#ifdef CONFIG_SMP
+	smp_ops = xen_smp_ops;
+#endif
+
+	xen_setup_features();
+
+	/* Get mfn list */
+	if (!xen_feature(XENFEAT_auto_translated_physmap))
+		phys_to_machine_mapping = (unsigned long *)xen_start_info->mfn_list;
+
+	pgd = (pgd_t *)xen_start_info->pt_base;
+
+	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
+
+	init_mm.pgd = pgd; /* use the Xen pagetables to start */
+
+	/* keep using Xen gdt for now; no urgent need to change it */
+
+	x86_write_percpu(xen_cr3, __pa(pgd));
+
+#ifdef CONFIG_SMP
+	/* Don't do the full vcpu_info placement stuff until we have a
+	   possible map. */
+	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
+#else
+	/* May as well do it now, since there's no good time to call
+	   it later on UP. */
+	xen_setup_vcpu_info_placement();
+#endif
+
+	paravirt_ops.kernel_rpl = 1;
+	if (xen_feature(XENFEAT_supervisor_mode_kernel))
+		paravirt_ops.kernel_rpl = 0;
+
+	/* set the limit of our address space */
+	reserve_top_address(-HYPERVISOR_VIRT_START + 2 * PAGE_SIZE);
+
+	/* set up basic CPUID stuff */
+	cpu_detect(&new_cpu_data);
+	new_cpu_data.hard_math = 1;
+	new_cpu_data.x86_capability[0] = cpuid_edx(1);
+
+	/* Poke various useful things into boot_params */
+	LOADER_TYPE = (9 << 4) | 0;
+	INITRD_START = xen_start_info->mod_start ? __pa(xen_start_info->mod_start) : 0;
+	INITRD_SIZE = xen_start_info->mod_len;
+
+	/* Start the world */
+	start_kernel();
+}
diff --git a/arch/i386/xen/events.c b/arch/i386/xen/events.c
new file mode 100644
index 0000000..8904acc
--- /dev/null
+++ b/arch/i386/xen/events.c
@@ -0,0 +1,590 @@
+/*
+ * Xen event channels
+ *
+ * Xen models interrupts with abstract event channels.  Because each
+ * domain gets 1024 event channels, but NR_IRQ is not that large, we
+ * must dynamically map irqs<->event channels.  The event channels
+ * interface with the rest of the kernel by defining a xen interrupt
+ * chip.  When an event is recieved, it is mapped to an irq and sent
+ * through the normal interrupt processing path.
+ *
+ * There are four kinds of events which can be mapped to an event
+ * channel:
+ *
+ * 1. Inter-domain notifications.  This includes all the virtual
+ *    device events, since they're driven by front-ends in another domain
+ *    (typically dom0).
+ * 2. VIRQs, typically used for timers.  These are per-cpu events.
+ * 3. IPIs.
+ * 4. Hardware interrupts. Not supported at present.
+ *
+ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
+ */
+
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/ptrace.h>
+#include <asm/irq.h>
+#include <asm/sync_bitops.h>
+#include <asm/xen/hypercall.h>
+
+#include <xen/events.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/event_channel.h>
+
+#include "xen-ops.h"
+
+/*
+ * This lock protects updates to the following mapping and reference-count
+ * arrays. The lock does not need to be acquired to read the mapping tables.
+ */
+static DEFINE_SPINLOCK(irq_mapping_update_lock);
+
+/* IRQ <-> VIRQ mapping. */
+static DEFINE_PER_CPU(int, virq_to_irq[NR_VIRQS]) = {[0 ... NR_VIRQS-1] = -1};
+
+/* IRQ <-> IPI mapping */
+static DEFINE_PER_CPU(int, ipi_to_irq[XEN_NR_IPIS]) = {[0 ... XEN_NR_IPIS-1] = -1};
+
+/* Packed IRQ information: binding type, sub-type index, and event channel. */
+struct packed_irq
+{
+	unsigned short evtchn;
+	unsigned char index;
+	unsigned char type;
+};
+
+static struct packed_irq irq_info[NR_IRQS];
+
+/* Binding types. */
+enum {
+	IRQT_UNBOUND,
+	IRQT_PIRQ,
+	IRQT_VIRQ,
+	IRQT_IPI,
+	IRQT_EVTCHN
+};
+
+/* Convenient shorthand for packed representation of an unbound IRQ. */
+#define IRQ_UNBOUND	mk_irq_info(IRQT_UNBOUND, 0, 0)
+
+static int evtchn_to_irq[NR_EVENT_CHANNELS] = {
+	[0 ... NR_EVENT_CHANNELS-1] = -1
+};
+static unsigned long cpu_evtchn_mask[NR_CPUS][NR_EVENT_CHANNELS/BITS_PER_LONG];
+static u8 cpu_evtchn[NR_EVENT_CHANNELS];
+
+/* Reference counts for bindings to IRQs. */
+static int irq_bindcount[NR_IRQS];
+
+/* Xen will never allocate port zero for any purpose. */
+#define VALID_EVTCHN(chn)	((chn) != 0)
+
+/*
+ * Force a proper event-channel callback from Xen after clearing the
+ * callback mask. We do this in a very simple manner, by making a call
+ * down into Xen. The pending flag will be checked by Xen on return.
+ */
+void force_evtchn_callback(void)
+{
+	(void)HYPERVISOR_xen_version(0, NULL);
+}
+EXPORT_SYMBOL_GPL(force_evtchn_callback);
+
+static struct irq_chip xen_dynamic_chip;
+
+/* Constructor for packed IRQ information. */
+static inline struct packed_irq mk_irq_info(u32 type, u32 index, u32 evtchn)
+{
+	return (struct packed_irq) { evtchn, index, type };
+}
+
+/*
+ * Accessors for packed IRQ information.
+ */
+static inline unsigned int evtchn_from_irq(int irq)
+{
+	return irq_info[irq].evtchn;
+}
+
+static inline unsigned int index_from_irq(int irq)
+{
+	return irq_info[irq].index;
+}
+
+static inline unsigned int type_from_irq(int irq)
+{
+	return irq_info[irq].type;
+}
+
+static inline unsigned long active_evtchns(unsigned int cpu,
+					   struct shared_info *sh,
+					   unsigned int idx)
+{
+	return (sh->evtchn_pending[idx] &
+		cpu_evtchn_mask[cpu][idx] &
+		~sh->evtchn_mask[idx]);
+}
+
+static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
+{
+	int irq = evtchn_to_irq[chn];
+
+	BUG_ON(irq == -1);
+#ifdef CONFIG_SMP
+	irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+#endif
+
+	__clear_bit(chn, cpu_evtchn_mask[cpu_evtchn[chn]]);
+	__set_bit(chn, cpu_evtchn_mask[cpu]);
+
+	cpu_evtchn[chn] = cpu;
+}
+
+static void init_evtchn_cpu_bindings(void)
+{
+#ifdef CONFIG_SMP
+	int i;
+	/* By default all event channels notify CPU#0. */
+	for (i = 0; i < NR_IRQS; i++)
+		irq_desc[i].affinity = cpumask_of_cpu(0);
+#endif
+
+	memset(cpu_evtchn, 0, sizeof(cpu_evtchn));
+	memset(cpu_evtchn_mask[0], ~0, sizeof(cpu_evtchn_mask[0]));
+}
+
+static inline unsigned int cpu_from_evtchn(unsigned int evtchn)
+{
+	return cpu_evtchn[evtchn];
+}
+
+static inline void clear_evtchn(int port)
+{
+	struct shared_info *s = HYPERVISOR_shared_info;
+	sync_clear_bit(port, &s->evtchn_pending[0]);
+}
+
+static inline void set_evtchn(int port)
+{
+	struct shared_info *s = HYPERVISOR_shared_info;
+	sync_set_bit(port, &s->evtchn_pending[0]);
+}
+
+
+/**
+ * notify_remote_via_irq - send event to remote end of event channel via irq
+ * @irq: irq of event channel to send event to
+ *
+ * Unlike notify_remote_via_evtchn(), this is safe to use across
+ * save/restore. Notifications on a broken connection are silently
+ * dropped.
+ */
+void notify_remote_via_irq(int irq)
+{
+	int evtchn = evtchn_from_irq(irq);
+
+	if (VALID_EVTCHN(evtchn))
+		notify_remote_via_evtchn(evtchn);
+}
+EXPORT_SYMBOL_GPL(notify_remote_via_irq);
+
+static void mask_evtchn(int port)
+{
+	struct shared_info *s = HYPERVISOR_shared_info;
+	sync_set_bit(port, &s->evtchn_mask[0]);
+}
+
+static void unmask_evtchn(int port)
+{
+	struct shared_info *s = HYPERVISOR_shared_info;
+	unsigned int cpu = get_cpu();
+
+	BUG_ON(!irqs_disabled());
+
+	/* Slow path (hypercall) if this is a non-local port. */
+	if (unlikely(cpu != cpu_from_evtchn(port))) {
+		struct evtchn_unmask unmask = { .port = port };
+		(void)HYPERVISOR_event_channel_op(EVTCHNOP_unmask, &unmask);
+	} else {
+		struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu);
+
+		sync_clear_bit(port, &s->evtchn_mask[0]);
+
+		/*
+		 * The following is basically the equivalent of
+		 * 'hw_resend_irq'. Just like a real IO-APIC we 'lose
+		 * the interrupt edge' if the channel is masked.
+		 */
+		if (sync_test_bit(port, &s->evtchn_pending[0]) &&
+		    !sync_test_and_set_bit(port / BITS_PER_LONG,
+					   &vcpu_info->evtchn_pending_sel))
+			vcpu_info->evtchn_upcall_pending = 1;
+	}
+
+	put_cpu();
+}
+
+static int find_unbound_irq(void)
+{
+	int irq;
+
+	/* Only allocate from dynirq range */
+	for (irq = 0; irq < NR_IRQS; irq++)
+		if (irq_bindcount[irq] == 0)
+			break;
+
+	if (irq == NR_IRQS)
+		panic("No available IRQ to bind to: increase NR_IRQS!\n");
+
+	return irq;
+}
+
+int bind_evtchn_to_irq(unsigned int evtchn)
+{
+	int irq;
+
+	spin_lock(&irq_mapping_update_lock);
+
+	irq = evtchn_to_irq[evtchn];
+
+	if (irq == -1) {
+		irq = find_unbound_irq();
+
+		dynamic_irq_init(irq);
+		set_irq_chip_and_handler_name(irq, &xen_dynamic_chip,
+					      handle_level_irq, "event");
+
+		evtchn_to_irq[evtchn] = irq;
+		irq_info[irq] = mk_irq_info(IRQT_EVTCHN, 0, evtchn);
+	}
+
+	irq_bindcount[irq]++;
+
+	spin_unlock(&irq_mapping_update_lock);
+
+	return irq;
+}
+EXPORT_SYMBOL_GPL(bind_evtchn_to_irq);
+
+static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu)
+{
+	struct evtchn_bind_ipi bind_ipi;
+	int evtchn, irq;
+
+	spin_lock(&irq_mapping_update_lock);
+
+	irq = per_cpu(ipi_to_irq, cpu)[ipi];
+	if (irq == -1) {
+		irq = find_unbound_irq();
+		if (irq < 0)
+			goto out;
+
+		dynamic_irq_init(irq);
+		set_irq_chip_and_handler_name(irq, &xen_dynamic_chip,
+					      handle_level_irq, "ipi");
+
+		bind_ipi.vcpu = cpu;
+		if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_ipi,
+						&bind_ipi) != 0)
+			BUG();
+		evtchn = bind_ipi.port;
+
+		evtchn_to_irq[evtchn] = irq;
+		irq_info[irq] = mk_irq_info(IRQT_IPI, ipi, evtchn);
+
+		per_cpu(ipi_to_irq, cpu)[ipi] = irq;
+
+		bind_evtchn_to_cpu(evtchn, cpu);
+	}
+
+	irq_bindcount[irq]++;
+
+ out:
+	spin_unlock(&irq_mapping_update_lock);
+	return irq;
+}
+
+
+static int bind_virq_to_irq(unsigned int virq, unsigned int cpu)
+{
+	struct evtchn_bind_virq bind_virq;
+	int evtchn, irq;
+
+	spin_lock(&irq_mapping_update_lock);
+
+	irq = per_cpu(virq_to_irq, cpu)[virq];
+
+	if (irq == -1) {
+		bind_virq.virq = virq;
+		bind_virq.vcpu = cpu;
+		if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq,
+						&bind_virq) != 0)
+			BUG();
+		evtchn = bind_virq.port;
+
+		irq = find_unbound_irq();
+
+		dynamic_irq_init(irq);
+		set_irq_chip_and_handler_name(irq, &xen_dynamic_chip,
+					      handle_level_irq, "virq");
+
+		evtchn_to_irq[evtchn] = irq;
+		irq_info[irq] = mk_irq_info(IRQT_VIRQ, virq, evtchn);
+
+		per_cpu(virq_to_irq, cpu)[virq] = irq;
+
+		bind_evtchn_to_cpu(evtchn, cpu);
+	}
+
+	irq_bindcount[irq]++;
+
+	spin_unlock(&irq_mapping_update_lock);
+
+	return irq;
+}
+
+static void unbind_from_irq(unsigned int irq)
+{
+	struct evtchn_close close;
+	int evtchn = evtchn_from_irq(irq);
+
+	spin_lock(&irq_mapping_update_lock);
+
+	if (VALID_EVTCHN(evtchn) && (--irq_bindcount[irq] == 0)) {
+		close.port = evtchn;
+		if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0)
+			BUG();
+
+		switch (type_from_irq(irq)) {
+		case IRQT_VIRQ:
+			per_cpu(virq_to_irq, cpu_from_evtchn(evtchn))
+				[index_from_irq(irq)] = -1;
+			break;
+		default:
+			break;
+		}
+
+		/* Closed ports are implicitly re-bound to VCPU0. */
+		bind_evtchn_to_cpu(evtchn, 0);
+
+		evtchn_to_irq[evtchn] = -1;
+		irq_info[irq] = IRQ_UNBOUND;
+
+		dynamic_irq_init(irq);
+	}
+
+	spin_unlock(&irq_mapping_update_lock);
+}
+
+int bind_evtchn_to_irqhandler(unsigned int evtchn,
+			      irqreturn_t (*handler)(int, void *),
+			      unsigned long irqflags,
+			      const char *devname, void *dev_id)
+{
+	unsigned int irq;
+	int retval;
+
+	irq = bind_evtchn_to_irq(evtchn);
+	retval = request_irq(irq, handler, irqflags, devname, dev_id);
+	if (retval != 0) {
+		unbind_from_irq(irq);
+		return retval;
+	}
+
+	return irq;
+}
+EXPORT_SYMBOL_GPL(bind_evtchn_to_irqhandler);
+
+int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu,
+			    irqreturn_t (*handler)(int, void *),
+			    unsigned long irqflags, const char *devname, void *dev_id)
+{
+	unsigned int irq;
+	int retval;
+
+	irq = bind_virq_to_irq(virq, cpu);
+	retval = request_irq(irq, handler, irqflags, devname, dev_id);
+	if (retval != 0) {
+		unbind_from_irq(irq);
+		return retval;
+	}
+
+	return irq;
+}
+EXPORT_SYMBOL_GPL(bind_virq_to_irqhandler);
+
+int bind_ipi_to_irqhandler(enum ipi_vector ipi,
+			   unsigned int cpu,
+			   irq_handler_t handler,
+			   unsigned long irqflags,
+			   const char *devname,
+			   void *dev_id)
+{
+	int irq, retval;
+
+	irq = bind_ipi_to_irq(ipi, cpu);
+	if (irq < 0)
+		return irq;
+
+	retval = request_irq(irq, handler, irqflags, devname, dev_id);
+	if (retval != 0) {
+		unbind_from_irq(irq);
+		return retval;
+	}
+
+	return irq;
+}
+
+void unbind_from_irqhandler(unsigned int irq, void *dev_id)
+{
+	free_irq(irq, dev_id);
+	unbind_from_irq(irq);
+}
+EXPORT_SYMBOL_GPL(unbind_from_irqhandler);
+
+void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector)
+{
+	int irq = per_cpu(ipi_to_irq, cpu)[vector];
+	BUG_ON(irq < 0);
+	notify_remote_via_irq(irq);
+}
+
+
+/*
+ * Search the CPUs pending events bitmasks.  For each one found, map
+ * the event number to an irq, and feed it into do_IRQ() for
+ * handling.
+ *
+ * Xen uses a two-level bitmap to speed searching.  The first level is
+ * a bitset of words which contain pending event bits.  The second
+ * level is a bitset of pending events themselves.
+ */
+fastcall void xen_evtchn_do_upcall(struct pt_regs *regs)
+{
+	int cpu = get_cpu();
+	struct shared_info *s = HYPERVISOR_shared_info;
+	struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu);
+	unsigned long pending_words;
+
+	vcpu_info->evtchn_upcall_pending = 0;
+
+	/* NB. No need for a barrier here -- XCHG is a barrier on x86. */
+	pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0);
+	while (pending_words != 0) {
+		unsigned long pending_bits;
+		int word_idx = __ffs(pending_words);
+		pending_words &= ~(1UL << word_idx);
+
+		while ((pending_bits = active_evtchns(cpu, s, word_idx)) != 0) {
+			int bit_idx = __ffs(pending_bits);
+			int port = (word_idx * BITS_PER_LONG) + bit_idx;
+			int irq = evtchn_to_irq[port];
+
+			if (irq != -1) {
+				regs->orig_eax = ~irq;
+				do_IRQ(regs);
+			}
+		}
+	}
+
+	put_cpu();
+}
+
+/* Rebind an evtchn so that it gets delivered to a specific cpu */
+static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
+{
+	struct evtchn_bind_vcpu bind_vcpu;
+	int evtchn = evtchn_from_irq(irq);
+
+	if (!VALID_EVTCHN(evtchn))
+		return;
+
+	/* Send future instances of this interrupt to other vcpu. */
+	bind_vcpu.port = evtchn;
+	bind_vcpu.vcpu = tcpu;
+
+	/*
+	 * If this fails, it usually just indicates that we're dealing with a
+	 * virq or IPI channel, which don't actually need to be rebound. Ignore
+	 * it, but don't do the xenlinux-level rebind in that case.
+	 */
+	if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0)
+		bind_evtchn_to_cpu(evtchn, tcpu);
+}
+
+
+static void set_affinity_irq(unsigned irq, cpumask_t dest)
+{
+	unsigned tcpu = first_cpu(dest);
+	rebind_irq_to_cpu(irq, tcpu);
+}
+
+static void enable_dynirq(unsigned int irq)
+{
+	int evtchn = evtchn_from_irq(irq);
+
+	if (VALID_EVTCHN(evtchn))
+		unmask_evtchn(evtchn);
+}
+
+static void disable_dynirq(unsigned int irq)
+{
+	int evtchn = evtchn_from_irq(irq);
+
+	if (VALID_EVTCHN(evtchn))
+		mask_evtchn(evtchn);
+}
+
+static void ack_dynirq(unsigned int irq)
+{
+	int evtchn = evtchn_from_irq(irq);
+
+	move_native_irq(irq);
+
+	if (VALID_EVTCHN(evtchn))
+		clear_evtchn(evtchn);
+}
+
+static int retrigger_dynirq(unsigned int irq)
+{
+	int evtchn = evtchn_from_irq(irq);
+	int ret = 0;
+
+	if (VALID_EVTCHN(evtchn)) {
+		set_evtchn(evtchn);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+static struct irq_chip xen_dynamic_chip __read_mostly = {
+	.name		= "xen-dyn",
+	.mask		= disable_dynirq,
+	.unmask		= enable_dynirq,
+	.ack		= ack_dynirq,
+	.set_affinity	= set_affinity_irq,
+	.retrigger	= retrigger_dynirq,
+};
+
+void __init xen_init_IRQ(void)
+{
+	int i;
+
+	init_evtchn_cpu_bindings();
+
+	/* No event channels are 'live' right now. */
+	for (i = 0; i < NR_EVENT_CHANNELS; i++)
+		mask_evtchn(i);
+
+	/* Dynamic IRQ space is currently unbound. Zero the refcnts. */
+	for (i = 0; i < NR_IRQS; i++)
+		irq_bindcount[i] = 0;
+
+	irq_ctx_init(smp_processor_id());
+}
diff --git a/arch/i386/xen/features.c b/arch/i386/xen/features.c
new file mode 100644
index 0000000..0707714
--- /dev/null
+++ b/arch/i386/xen/features.c
@@ -0,0 +1,29 @@
+/******************************************************************************
+ * features.c
+ *
+ * Xen feature flags.
+ *
+ * Copyright (c) 2006, Ian Campbell, XenSource Inc.
+ */
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/module.h>
+#include <asm/xen/hypervisor.h>
+#include <xen/features.h>
+
+u8 xen_features[XENFEAT_NR_SUBMAPS * 32] __read_mostly;
+EXPORT_SYMBOL_GPL(xen_features);
+
+void xen_setup_features(void)
+{
+	struct xen_feature_info fi;
+	int i, j;
+
+	for (i = 0; i < XENFEAT_NR_SUBMAPS; i++) {
+		fi.submap_idx = i;
+		if (HYPERVISOR_xen_version(XENVER_get_features, &fi) < 0)
+			break;
+		for (j = 0; j < 32; j++)
+			xen_features[i * 32 + j] = !!(fi.submap & 1<<j);
+	}
+}
diff --git a/arch/i386/xen/manage.c b/arch/i386/xen/manage.c
new file mode 100644
index 0000000..aa7af9e
--- /dev/null
+++ b/arch/i386/xen/manage.c
@@ -0,0 +1,143 @@
+/*
+ * Handle extern requests for shutdown, reboot and sysrq
+ */
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/reboot.h>
+#include <linux/sysrq.h>
+
+#include <xen/xenbus.h>
+
+#define SHUTDOWN_INVALID  -1
+#define SHUTDOWN_POWEROFF  0
+#define SHUTDOWN_SUSPEND   2
+/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only
+ * report a crash, not be instructed to crash!
+ * HALT is the same as POWEROFF, as far as we're concerned.  The tools use
+ * the distinction when we return the reason code to them.
+ */
+#define SHUTDOWN_HALT      4
+
+/* Ignore multiple shutdown requests. */
+static int shutting_down = SHUTDOWN_INVALID;
+
+static void shutdown_handler(struct xenbus_watch *watch,
+			     const char **vec, unsigned int len)
+{
+	char *str;
+	struct xenbus_transaction xbt;
+	int err;
+
+	if (shutting_down != SHUTDOWN_INVALID)
+		return;
+
+ again:
+	err = xenbus_transaction_start(&xbt);
+	if (err)
+		return;
+
+	str = (char *)xenbus_read(xbt, "control", "shutdown", NULL);
+	/* Ignore read errors and empty reads. */
+	if (XENBUS_IS_ERR_READ(str)) {
+		xenbus_transaction_end(xbt, 1);
+		return;
+	}
+
+	xenbus_write(xbt, "control", "shutdown", "");
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err == -EAGAIN) {
+		kfree(str);
+		goto again;
+	}
+
+	if (strcmp(str, "poweroff") == 0 ||
+	    strcmp(str, "halt") == 0)
+		orderly_poweroff(false);
+	else if (strcmp(str, "reboot") == 0)
+		ctrl_alt_del();
+	else {
+		printk(KERN_INFO "Ignoring shutdown request: %s\n", str);
+		shutting_down = SHUTDOWN_INVALID;
+	}
+
+	kfree(str);
+}
+
+static void sysrq_handler(struct xenbus_watch *watch, const char **vec,
+			  unsigned int len)
+{
+	char sysrq_key = '\0';
+	struct xenbus_transaction xbt;
+	int err;
+
+ again:
+	err = xenbus_transaction_start(&xbt);
+	if (err)
+		return;
+	if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) {
+		printk(KERN_ERR "Unable to read sysrq code in "
+		       "control/sysrq\n");
+		xenbus_transaction_end(xbt, 1);
+		return;
+	}
+
+	if (sysrq_key != '\0')
+		xenbus_printf(xbt, "control", "sysrq", "%c", '\0');
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err == -EAGAIN)
+		goto again;
+
+	if (sysrq_key != '\0')
+		handle_sysrq(sysrq_key, NULL);
+}
+
+static struct xenbus_watch shutdown_watch = {
+	.node = "control/shutdown",
+	.callback = shutdown_handler
+};
+
+static struct xenbus_watch sysrq_watch = {
+	.node = "control/sysrq",
+	.callback = sysrq_handler
+};
+
+static int setup_shutdown_watcher(void)
+{
+	int err;
+
+	err = register_xenbus_watch(&shutdown_watch);
+	if (err) {
+		printk(KERN_ERR "Failed to set shutdown watcher\n");
+		return err;
+	}
+
+	err = register_xenbus_watch(&sysrq_watch);
+	if (err) {
+		printk(KERN_ERR "Failed to set sysrq watcher\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int shutdown_event(struct notifier_block *notifier,
+			  unsigned long event,
+			  void *data)
+{
+	setup_shutdown_watcher();
+	return NOTIFY_DONE;
+}
+
+static int __init setup_shutdown_event(void)
+{
+	static struct notifier_block xenstore_notifier = {
+		.notifier_call = shutdown_event
+	};
+	register_xenstore_notifier(&xenstore_notifier);
+
+	return 0;
+}
+
+subsys_initcall(setup_shutdown_event);
diff --git a/arch/i386/xen/mmu.c b/arch/i386/xen/mmu.c
new file mode 100644
index 0000000..4ae038a
--- /dev/null
+++ b/arch/i386/xen/mmu.c
@@ -0,0 +1,564 @@
+/*
+ * Xen mmu operations
+ *
+ * This file contains the various mmu fetch and update operations.
+ * The most important job they must perform is the mapping between the
+ * domain's pfn and the overall machine mfns.
+ *
+ * Xen allows guests to directly update the pagetable, in a controlled
+ * fashion.  In other words, the guest modifies the same pagetable
+ * that the CPU actually uses, which eliminates the overhead of having
+ * a separate shadow pagetable.
+ *
+ * In order to allow this, it falls on the guest domain to map its
+ * notion of a "physical" pfn - which is just a domain-local linear
+ * address - into a real "machine address" which the CPU's MMU can
+ * use.
+ *
+ * A pgd_t/pmd_t/pte_t will typically contain an mfn, and so can be
+ * inserted directly into the pagetable.  When creating a new
+ * pte/pmd/pgd, it converts the passed pfn into an mfn.  Conversely,
+ * when reading the content back with __(pgd|pmd|pte)_val, it converts
+ * the mfn back into a pfn.
+ *
+ * The other constraint is that all pages which make up a pagetable
+ * must be mapped read-only in the guest.  This prevents uncontrolled
+ * guest updates to the pagetable.  Xen strictly enforces this, and
+ * will disallow any pagetable update which will end up mapping a
+ * pagetable page RW, and will disallow using any writable page as a
+ * pagetable.
+ *
+ * Naively, when loading %cr3 with the base of a new pagetable, Xen
+ * would need to validate the whole pagetable before going on.
+ * Naturally, this is quite slow.  The solution is to "pin" a
+ * pagetable, which enforces all the constraints on the pagetable even
+ * when it is not actively in use.  This menas that Xen can be assured
+ * that it is still valid when you do load it into %cr3, and doesn't
+ * need to revalidate it.
+ *
+ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
+ */
+#include <linux/sched.h>
+#include <linux/highmem.h>
+#include <linux/bug.h>
+#include <linux/sched.h>
+
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/paravirt.h>
+
+#include <asm/xen/hypercall.h>
+#include <asm/xen/hypervisor.h>
+
+#include <xen/page.h>
+#include <xen/interface/xen.h>
+
+#include "multicalls.h"
+#include "mmu.h"
+
+xmaddr_t arbitrary_virt_to_machine(unsigned long address)
+{
+	pte_t *pte = lookup_address(address);
+	unsigned offset = address & PAGE_MASK;
+
+	BUG_ON(pte == NULL);
+
+	return XMADDR((pte_mfn(*pte) << PAGE_SHIFT) + offset);
+}
+
+void make_lowmem_page_readonly(void *vaddr)
+{
+	pte_t *pte, ptev;
+	unsigned long address = (unsigned long)vaddr;
+
+	pte = lookup_address(address);
+	BUG_ON(pte == NULL);
+
+	ptev = pte_wrprotect(*pte);
+
+	if (HYPERVISOR_update_va_mapping(address, ptev, 0))
+		BUG();
+}
+
+void make_lowmem_page_readwrite(void *vaddr)
+{
+	pte_t *pte, ptev;
+	unsigned long address = (unsigned long)vaddr;
+
+	pte = lookup_address(address);
+	BUG_ON(pte == NULL);
+
+	ptev = pte_mkwrite(*pte);
+
+	if (HYPERVISOR_update_va_mapping(address, ptev, 0))
+		BUG();
+}
+
+
+void xen_set_pmd(pmd_t *ptr, pmd_t val)
+{
+	struct multicall_space mcs;
+	struct mmu_update *u;
+
+	preempt_disable();
+
+	mcs = xen_mc_entry(sizeof(*u));
+	u = mcs.args;
+	u->ptr = virt_to_machine(ptr).maddr;
+	u->val = pmd_val_ma(val);
+	MULTI_mmu_update(mcs.mc, u, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+/*
+ * Associate a virtual page frame with a given physical page frame
+ * and protection flags for that frame.
+ */
+void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	pgd = swapper_pg_dir + pgd_index(vaddr);
+	if (pgd_none(*pgd)) {
+		BUG();
+		return;
+	}
+	pud = pud_offset(pgd, vaddr);
+	if (pud_none(*pud)) {
+		BUG();
+		return;
+	}
+	pmd = pmd_offset(pud, vaddr);
+	if (pmd_none(*pmd)) {
+		BUG();
+		return;
+	}
+	pte = pte_offset_kernel(pmd, vaddr);
+	/* <mfn,flags> stored as-is, to permit clearing entries */
+	xen_set_pte(pte, mfn_pte(mfn, flags));
+
+	/*
+	 * It's enough to flush this one mapping.
+	 * (PGE mappings get flushed as well)
+	 */
+	__flush_tlb_one(vaddr);
+}
+
+void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
+		    pte_t *ptep, pte_t pteval)
+{
+	if (mm == current->mm || mm == &init_mm) {
+		if (xen_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
+			struct multicall_space mcs;
+			mcs = xen_mc_entry(0);
+
+			MULTI_update_va_mapping(mcs.mc, addr, pteval, 0);
+			xen_mc_issue(PARAVIRT_LAZY_MMU);
+			return;
+		} else
+			if (HYPERVISOR_update_va_mapping(addr, pteval, 0) == 0)
+				return;
+	}
+	xen_set_pte(ptep, pteval);
+}
+
+#ifdef CONFIG_X86_PAE
+void xen_set_pud(pud_t *ptr, pud_t val)
+{
+	struct multicall_space mcs;
+	struct mmu_update *u;
+
+	preempt_disable();
+
+	mcs = xen_mc_entry(sizeof(*u));
+	u = mcs.args;
+	u->ptr = virt_to_machine(ptr).maddr;
+	u->val = pud_val_ma(val);
+	MULTI_mmu_update(mcs.mc, u, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+void xen_set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+
+void xen_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	set_64bit((u64 *)ptep, pte_val_ma(pte));
+}
+
+void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	ptep->pte_low = 0;
+	smp_wmb();		/* make sure low gets written first */
+	ptep->pte_high = 0;
+}
+
+void xen_pmd_clear(pmd_t *pmdp)
+{
+	xen_set_pmd(pmdp, __pmd(0));
+}
+
+unsigned long long xen_pte_val(pte_t pte)
+{
+	unsigned long long ret = 0;
+
+	if (pte.pte_low) {
+		ret = ((unsigned long long)pte.pte_high << 32) | pte.pte_low;
+		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
+	}
+
+	return ret;
+}
+
+unsigned long long xen_pmd_val(pmd_t pmd)
+{
+	unsigned long long ret = pmd.pmd;
+	if (ret)
+		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
+	return ret;
+}
+
+unsigned long long xen_pgd_val(pgd_t pgd)
+{
+	unsigned long long ret = pgd.pgd;
+	if (ret)
+		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
+	return ret;
+}
+
+pte_t xen_make_pte(unsigned long long pte)
+{
+	if (pte & 1)
+		pte = phys_to_machine(XPADDR(pte)).maddr;
+
+	return (pte_t){ pte, pte >> 32 };
+}
+
+pmd_t xen_make_pmd(unsigned long long pmd)
+{
+	if (pmd & 1)
+		pmd = phys_to_machine(XPADDR(pmd)).maddr;
+
+	return (pmd_t){ pmd };
+}
+
+pgd_t xen_make_pgd(unsigned long long pgd)
+{
+	if (pgd & _PAGE_PRESENT)
+		pgd = phys_to_machine(XPADDR(pgd)).maddr;
+
+	return (pgd_t){ pgd };
+}
+#else  /* !PAE */
+void xen_set_pte(pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+unsigned long xen_pte_val(pte_t pte)
+{
+	unsigned long ret = pte.pte_low;
+
+	if (ret & _PAGE_PRESENT)
+		ret = machine_to_phys(XMADDR(ret)).paddr;
+
+	return ret;
+}
+
+unsigned long xen_pgd_val(pgd_t pgd)
+{
+	unsigned long ret = pgd.pgd;
+	if (ret)
+		ret = machine_to_phys(XMADDR(ret)).paddr | 1;
+	return ret;
+}
+
+pte_t xen_make_pte(unsigned long pte)
+{
+	if (pte & _PAGE_PRESENT)
+		pte = phys_to_machine(XPADDR(pte)).maddr;
+
+	return (pte_t){ pte };
+}
+
+pgd_t xen_make_pgd(unsigned long pgd)
+{
+	if (pgd & _PAGE_PRESENT)
+		pgd = phys_to_machine(XPADDR(pgd)).maddr;
+
+	return (pgd_t){ pgd };
+}
+#endif	/* CONFIG_X86_PAE */
+
+
+
+/*
+  (Yet another) pagetable walker.  This one is intended for pinning a
+  pagetable.  This means that it walks a pagetable and calls the
+  callback function on each page it finds making up the page table,
+  at every level.  It walks the entire pagetable, but it only bothers
+  pinning pte pages which are below pte_limit.  In the normal case
+  this will be TASK_SIZE, but at boot we need to pin up to
+  FIXADDR_TOP.  But the important bit is that we don't pin beyond
+  there, because then we start getting into Xen's ptes.
+*/
+static int pgd_walk(pgd_t *pgd_base, int (*func)(struct page *, unsigned),
+		    unsigned long limit)
+{
+	pgd_t *pgd = pgd_base;
+	int flush = 0;
+	unsigned long addr = 0;
+	unsigned long pgd_next;
+
+	BUG_ON(limit > FIXADDR_TOP);
+
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return 0;
+
+	for (; addr != FIXADDR_TOP; pgd++, addr = pgd_next) {
+		pud_t *pud;
+		unsigned long pud_limit, pud_next;
+
+		pgd_next = pud_limit = pgd_addr_end(addr, FIXADDR_TOP);
+
+		if (!pgd_val(*pgd))
+			continue;
+
+		pud = pud_offset(pgd, 0);
+
+		if (PTRS_PER_PUD > 1) /* not folded */
+			flush |= (*func)(virt_to_page(pud), 0);
+
+		for (; addr != pud_limit; pud++, addr = pud_next) {
+			pmd_t *pmd;
+			unsigned long pmd_limit;
+
+			pud_next = pud_addr_end(addr, pud_limit);
+
+			if (pud_next < limit)
+				pmd_limit = pud_next;
+			else
+				pmd_limit = limit;
+
+			if (pud_none(*pud))
+				continue;
+
+			pmd = pmd_offset(pud, 0);
+
+			if (PTRS_PER_PMD > 1) /* not folded */
+				flush |= (*func)(virt_to_page(pmd), 0);
+
+			for (; addr != pmd_limit; pmd++) {
+				addr += (PAGE_SIZE * PTRS_PER_PTE);
+				if ((pmd_limit-1) < (addr-1)) {
+					addr = pmd_limit;
+					break;
+				}
+
+				if (pmd_none(*pmd))
+					continue;
+
+				flush |= (*func)(pmd_page(*pmd), 0);
+			}
+		}
+	}
+
+	flush |= (*func)(virt_to_page(pgd_base), UVMF_TLB_FLUSH);
+
+	return flush;
+}
+
+static int pin_page(struct page *page, unsigned flags)
+{
+	unsigned pgfl = test_and_set_bit(PG_pinned, &page->flags);
+	int flush;
+
+	if (pgfl)
+		flush = 0;		/* already pinned */
+	else if (PageHighMem(page))
+		/* kmaps need flushing if we found an unpinned
+		   highpage */
+		flush = 1;
+	else {
+		void *pt = lowmem_page_address(page);
+		unsigned long pfn = page_to_pfn(page);
+		struct multicall_space mcs = __xen_mc_entry(0);
+
+		flush = 0;
+
+		MULTI_update_va_mapping(mcs.mc, (unsigned long)pt,
+					pfn_pte(pfn, PAGE_KERNEL_RO),
+					flags);
+	}
+
+	return flush;
+}
+
+/* This is called just after a mm has been created, but it has not
+   been used yet.  We need to make sure that its pagetable is all
+   read-only, and can be pinned. */
+void xen_pgd_pin(pgd_t *pgd)
+{
+	struct multicall_space mcs;
+	struct mmuext_op *op;
+
+	xen_mc_batch();
+
+	if (pgd_walk(pgd, pin_page, TASK_SIZE)) {
+		/* re-enable interrupts for kmap_flush_unused */
+		xen_mc_issue(0);
+		kmap_flush_unused();
+		xen_mc_batch();
+	}
+
+	mcs = __xen_mc_entry(sizeof(*op));
+	op = mcs.args;
+
+#ifdef CONFIG_X86_PAE
+	op->cmd = MMUEXT_PIN_L3_TABLE;
+#else
+	op->cmd = MMUEXT_PIN_L2_TABLE;
+#endif
+	op->arg1.mfn = pfn_to_mfn(PFN_DOWN(__pa(pgd)));
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(0);
+}
+
+/* The init_mm pagetable is really pinned as soon as its created, but
+   that's before we have page structures to store the bits.  So do all
+   the book-keeping now. */
+static __init int mark_pinned(struct page *page, unsigned flags)
+{
+	SetPagePinned(page);
+	return 0;
+}
+
+void __init xen_mark_init_mm_pinned(void)
+{
+	pgd_walk(init_mm.pgd, mark_pinned, FIXADDR_TOP);
+}
+
+static int unpin_page(struct page *page, unsigned flags)
+{
+	unsigned pgfl = test_and_clear_bit(PG_pinned, &page->flags);
+
+	if (pgfl && !PageHighMem(page)) {
+		void *pt = lowmem_page_address(page);
+		unsigned long pfn = page_to_pfn(page);
+		struct multicall_space mcs = __xen_mc_entry(0);
+
+		MULTI_update_va_mapping(mcs.mc, (unsigned long)pt,
+					pfn_pte(pfn, PAGE_KERNEL),
+					flags);
+	}
+
+	return 0;		/* never need to flush on unpin */
+}
+
+/* Release a pagetables pages back as normal RW */
+static void xen_pgd_unpin(pgd_t *pgd)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs;
+
+	xen_mc_batch();
+
+	mcs = __xen_mc_entry(sizeof(*op));
+
+	op = mcs.args;
+	op->cmd = MMUEXT_UNPIN_TABLE;
+	op->arg1.mfn = pfn_to_mfn(PFN_DOWN(__pa(pgd)));
+
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	pgd_walk(pgd, unpin_page, TASK_SIZE);
+
+	xen_mc_issue(0);
+}
+
+void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	spin_lock(&next->page_table_lock);
+	xen_pgd_pin(next->pgd);
+	spin_unlock(&next->page_table_lock);
+}
+
+void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
+{
+	spin_lock(&mm->page_table_lock);
+	xen_pgd_pin(mm->pgd);
+	spin_unlock(&mm->page_table_lock);
+}
+
+
+#ifdef CONFIG_SMP
+/* Another cpu may still have their %cr3 pointing at the pagetable, so
+   we need to repoint it somewhere else before we can unpin it. */
+static void drop_other_mm_ref(void *info)
+{
+	struct mm_struct *mm = info;
+
+	if (__get_cpu_var(cpu_tlbstate).active_mm == mm)
+		leave_mm(smp_processor_id());
+}
+
+static void drop_mm_ref(struct mm_struct *mm)
+{
+	if (current->active_mm == mm) {
+		if (current->mm == mm)
+			load_cr3(swapper_pg_dir);
+		else
+			leave_mm(smp_processor_id());
+	}
+
+	if (!cpus_empty(mm->cpu_vm_mask))
+		xen_smp_call_function_mask(mm->cpu_vm_mask, drop_other_mm_ref,
+					   mm, 1);
+}
+#else
+static void drop_mm_ref(struct mm_struct *mm)
+{
+	if (current->active_mm == mm)
+		load_cr3(swapper_pg_dir);
+}
+#endif
+
+/*
+ * While a process runs, Xen pins its pagetables, which means that the
+ * hypervisor forces it to be read-only, and it controls all updates
+ * to it.  This means that all pagetable updates have to go via the
+ * hypervisor, which is moderately expensive.
+ *
+ * Since we're pulling the pagetable down, we switch to use init_mm,
+ * unpin old process pagetable and mark it all read-write, which
+ * allows further operations on it to be simple memory accesses.
+ *
+ * The only subtle point is that another CPU may be still using the
+ * pagetable because of lazy tlb flushing.  This means we need need to
+ * switch all CPUs off this pagetable before we can unpin it.
+ */
+void xen_exit_mmap(struct mm_struct *mm)
+{
+	get_cpu();		/* make sure we don't move around */
+	drop_mm_ref(mm);
+	put_cpu();
+
+	spin_lock(&mm->page_table_lock);
+	xen_pgd_unpin(mm->pgd);
+	spin_unlock(&mm->page_table_lock);
+}
diff --git a/arch/i386/xen/mmu.h b/arch/i386/xen/mmu.h
new file mode 100644
index 0000000..c9ff27f
--- /dev/null
+++ b/arch/i386/xen/mmu.h
@@ -0,0 +1,60 @@
+#ifndef _XEN_MMU_H
+
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+/*
+ * Page-directory addresses above 4GB do not fit into architectural %cr3.
+ * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
+ * must use the following accessor macros to pack/unpack valid MFNs.
+ *
+ * Note that Xen is using the fact that the pagetable base is always
+ * page-aligned, and putting the 12 MSB of the address into the 12 LSB
+ * of cr3.
+ */
+#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
+#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
+
+
+void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
+
+void xen_set_pte(pte_t *ptep, pte_t pteval);
+void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
+		    pte_t *ptep, pte_t pteval);
+void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval);
+
+void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next);
+void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm);
+void xen_exit_mmap(struct mm_struct *mm);
+
+void xen_pgd_pin(pgd_t *pgd);
+//void xen_pgd_unpin(pgd_t *pgd);
+
+#ifdef CONFIG_X86_PAE
+unsigned long long xen_pte_val(pte_t);
+unsigned long long xen_pmd_val(pmd_t);
+unsigned long long xen_pgd_val(pgd_t);
+
+pte_t xen_make_pte(unsigned long long);
+pmd_t xen_make_pmd(unsigned long long);
+pgd_t xen_make_pgd(unsigned long long);
+
+void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
+		    pte_t *ptep, pte_t pteval);
+void xen_set_pte_atomic(pte_t *ptep, pte_t pte);
+void xen_set_pud(pud_t *ptr, pud_t val);
+void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+void xen_pmd_clear(pmd_t *pmdp);
+
+
+#else
+unsigned long xen_pte_val(pte_t);
+unsigned long xen_pmd_val(pmd_t);
+unsigned long xen_pgd_val(pgd_t);
+
+pte_t xen_make_pte(unsigned long);
+pmd_t xen_make_pmd(unsigned long);
+pgd_t xen_make_pgd(unsigned long);
+#endif
+
+#endif	/* _XEN_MMU_H */
diff --git a/arch/i386/xen/multicalls.c b/arch/i386/xen/multicalls.c
new file mode 100644
index 0000000..c837e8e
--- /dev/null
+++ b/arch/i386/xen/multicalls.c
@@ -0,0 +1,90 @@
+/*
+ * Xen hypercall batching.
+ *
+ * Xen allows multiple hypercalls to be issued at once, using the
+ * multicall interface.  This allows the cost of trapping into the
+ * hypervisor to be amortized over several calls.
+ *
+ * This file implements a simple interface for multicalls.  There's a
+ * per-cpu buffer of outstanding multicalls.  When you want to queue a
+ * multicall for issuing, you can allocate a multicall slot for the
+ * call and its arguments, along with storage for space which is
+ * pointed to by the arguments (for passing pointers to structures,
+ * etc).  When the multicall is actually issued, all the space for the
+ * commands and allocated memory is freed for reuse.
+ *
+ * Multicalls are flushed whenever any of the buffers get full, or
+ * when explicitly requested.  There's no way to get per-multicall
+ * return results back.  It will BUG if any of the multicalls fail.
+ *
+ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
+ */
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+
+#include <asm/xen/hypercall.h>
+
+#include "multicalls.h"
+
+#define MC_BATCH	32
+#define MC_ARGS		(MC_BATCH * 16 / sizeof(u64))
+
+struct mc_buffer {
+	struct multicall_entry entries[MC_BATCH];
+	u64 args[MC_ARGS];
+	unsigned mcidx, argidx;
+};
+
+static DEFINE_PER_CPU(struct mc_buffer, mc_buffer);
+DEFINE_PER_CPU(unsigned long, xen_mc_irq_flags);
+
+void xen_mc_flush(void)
+{
+	struct mc_buffer *b = &__get_cpu_var(mc_buffer);
+	int ret = 0;
+	unsigned long flags;
+
+	BUG_ON(preemptible());
+
+	/* Disable interrupts in case someone comes in and queues
+	   something in the middle */
+	local_irq_save(flags);
+
+	if (b->mcidx) {
+		int i;
+
+		if (HYPERVISOR_multicall(b->entries, b->mcidx) != 0)
+			BUG();
+		for (i = 0; i < b->mcidx; i++)
+			if (b->entries[i].result < 0)
+				ret++;
+		b->mcidx = 0;
+		b->argidx = 0;
+	} else
+		BUG_ON(b->argidx != 0);
+
+	local_irq_restore(flags);
+
+	BUG_ON(ret);
+}
+
+struct multicall_space __xen_mc_entry(size_t args)
+{
+	struct mc_buffer *b = &__get_cpu_var(mc_buffer);
+	struct multicall_space ret;
+	unsigned argspace = (args + sizeof(u64) - 1) / sizeof(u64);
+
+	BUG_ON(preemptible());
+	BUG_ON(argspace > MC_ARGS);
+
+	if (b->mcidx == MC_BATCH ||
+	    (b->argidx + argspace) > MC_ARGS)
+		xen_mc_flush();
+
+	ret.mc = &b->entries[b->mcidx];
+	b->mcidx++;
+	ret.args = &b->args[b->argidx];
+	b->argidx += argspace;
+
+	return ret;
+}
diff --git a/arch/i386/xen/multicalls.h b/arch/i386/xen/multicalls.h
new file mode 100644
index 0000000..e6f7530
--- /dev/null
+++ b/arch/i386/xen/multicalls.h
@@ -0,0 +1,45 @@
+#ifndef _XEN_MULTICALLS_H
+#define _XEN_MULTICALLS_H
+
+#include "xen-ops.h"
+
+/* Multicalls */
+struct multicall_space
+{
+	struct multicall_entry *mc;
+	void *args;
+};
+
+/* Allocate room for a multicall and its args */
+struct multicall_space __xen_mc_entry(size_t args);
+
+DECLARE_PER_CPU(unsigned long, xen_mc_irq_flags);
+
+/* Call to start a batch of multiple __xen_mc_entry()s.  Must be
+   paired with xen_mc_issue() */
+static inline void xen_mc_batch(void)
+{
+	/* need to disable interrupts until this entry is complete */
+	local_irq_save(__get_cpu_var(xen_mc_irq_flags));
+}
+
+static inline struct multicall_space xen_mc_entry(size_t args)
+{
+	xen_mc_batch();
+	return __xen_mc_entry(args);
+}
+
+/* Flush all pending multicalls */
+void xen_mc_flush(void);
+
+/* Issue a multicall if we're not in a lazy mode */
+static inline void xen_mc_issue(unsigned mode)
+{
+	if ((xen_get_lazy_mode() & mode) == 0)
+		xen_mc_flush();
+
+	/* restore flags saved in xen_mc_batch */
+	local_irq_restore(x86_read_percpu(xen_mc_irq_flags));
+}
+
+#endif /* _XEN_MULTICALLS_H */
diff --git a/arch/i386/xen/setup.c b/arch/i386/xen/setup.c
new file mode 100644
index 0000000..2fe6eac
--- /dev/null
+++ b/arch/i386/xen/setup.c
@@ -0,0 +1,96 @@
+/*
+ * Machine specific setup for xen
+ *
+ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/pm.h>
+
+#include <asm/elf.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/hypercall.h>
+
+#include <xen/interface/physdev.h>
+#include <xen/features.h>
+
+#include "xen-ops.h"
+
+/* These are code, but not functions.  Defined in entry.S */
+extern const char xen_hypervisor_callback[];
+extern const char xen_failsafe_callback[];
+
+unsigned long *phys_to_machine_mapping;
+EXPORT_SYMBOL(phys_to_machine_mapping);
+
+/**
+ * machine_specific_memory_setup - Hook for machine specific memory setup.
+ **/
+
+char * __init xen_memory_setup(void)
+{
+	unsigned long max_pfn = xen_start_info->nr_pages;
+
+	e820.nr_map = 0;
+	add_memory_region(0, PFN_PHYS(max_pfn), E820_RAM);
+
+	return "Xen";
+}
+
+static void xen_idle(void)
+{
+	local_irq_disable();
+
+	if (need_resched())
+		local_irq_enable();
+	else {
+		current_thread_info()->status &= ~TS_POLLING;
+		smp_mb__after_clear_bit();
+		safe_halt();
+		current_thread_info()->status |= TS_POLLING;
+	}
+}
+
+void __init xen_arch_setup(void)
+{
+	struct physdev_set_iopl set_iopl;
+	int rc;
+
+	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
+	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);
+
+	if (!xen_feature(XENFEAT_auto_translated_physmap))
+		HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_pae_extended_cr3);
+
+	HYPERVISOR_set_callbacks(__KERNEL_CS, (unsigned long)xen_hypervisor_callback,
+				 __KERNEL_CS, (unsigned long)xen_failsafe_callback);
+
+	set_iopl.iopl = 1;
+	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+	if (rc != 0)
+		printk(KERN_INFO "physdev_op failed %d\n", rc);
+
+#ifdef CONFIG_ACPI
+	if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
+		printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
+		disable_acpi();
+	}
+#endif
+
+	memcpy(boot_command_line, xen_start_info->cmd_line,
+	       MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
+	       COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
+
+	pm_idle = xen_idle;
+
+#ifdef CONFIG_SMP
+	/* fill cpus_possible with all available cpus */
+	xen_fill_possible_map();
+#endif
+
+	paravirt_disable_iospace();
+}
diff --git a/arch/i386/xen/smp.c b/arch/i386/xen/smp.c
new file mode 100644
index 0000000..557b8e2
--- /dev/null
+++ b/arch/i386/xen/smp.c
@@ -0,0 +1,404 @@
+/*
+ * Xen SMP support
+ *
+ * This file implements the Xen versions of smp_ops.  SMP under Xen is
+ * very straightforward.  Bringing a CPU up is simply a matter of
+ * loading its initial context and setting it running.
+ *
+ * IPIs are handled through the Xen event mechanism.
+ *
+ * Because virtual CPUs can be scheduled onto any real CPU, there's no
+ * useful topology information for the kernel to make use of.  As a
+ * result, all CPUs are treated as if they're single-core and
+ * single-threaded.
+ *
+ * This does not handle HOTPLUG_CPU yet.
+ */
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/smp.h>
+
+#include <asm/paravirt.h>
+#include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/cpu.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/vcpu.h>
+
+#include <asm/xen/interface.h>
+#include <asm/xen/hypercall.h>
+
+#include <xen/page.h>
+#include <xen/events.h>
+
+#include "xen-ops.h"
+#include "mmu.h"
+
+static cpumask_t cpu_initialized_map;
+static DEFINE_PER_CPU(int, resched_irq);
+static DEFINE_PER_CPU(int, callfunc_irq);
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+	void (*func) (void *info);
+	void *info;
+	atomic_t started;
+	atomic_t finished;
+	int wait;
+};
+
+static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id);
+
+static struct call_data_struct *call_data;
+
+/*
+ * Reschedule call back. Nothing to do,
+ * all the work is done automatically when
+ * we return from the interrupt.
+ */
+static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static __cpuinit void cpu_bringup_and_idle(void)
+{
+	int cpu = smp_processor_id();
+
+	cpu_init();
+
+	preempt_disable();
+	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+
+	xen_setup_cpu_clockevents();
+
+	/* We can take interrupts now: we're officially "up". */
+	local_irq_enable();
+
+	wmb();			/* make sure everything is out */
+	cpu_idle();
+}
+
+static int xen_smp_intr_init(unsigned int cpu)
+{
+	int rc;
+	const char *resched_name, *callfunc_name;
+
+	per_cpu(resched_irq, cpu) = per_cpu(callfunc_irq, cpu) = -1;
+
+	resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
+	rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
+				    cpu,
+				    xen_reschedule_interrupt,
+				    IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				    resched_name,
+				    NULL);
+	if (rc < 0)
+		goto fail;
+	per_cpu(resched_irq, cpu) = rc;
+
+	callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu);
+	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR,
+				    cpu,
+				    xen_call_function_interrupt,
+				    IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				    callfunc_name,
+				    NULL);
+	if (rc < 0)
+		goto fail;
+	per_cpu(callfunc_irq, cpu) = rc;
+
+	return 0;
+
+ fail:
+	if (per_cpu(resched_irq, cpu) >= 0)
+		unbind_from_irqhandler(per_cpu(resched_irq, cpu), NULL);
+	if (per_cpu(callfunc_irq, cpu) >= 0)
+		unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL);
+	return rc;
+}
+
+void __init xen_fill_possible_map(void)
+{
+	int i, rc;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
+		if (rc >= 0)
+			cpu_set(i, cpu_possible_map);
+	}
+}
+
+void __init xen_smp_prepare_boot_cpu(void)
+{
+	int cpu;
+
+	BUG_ON(smp_processor_id() != 0);
+	native_smp_prepare_boot_cpu();
+
+	/* We've switched to the "real" per-cpu gdt, so make sure the
+	   old memory can be recycled */
+	make_lowmem_page_readwrite(&per_cpu__gdt_page);
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		cpus_clear(cpu_sibling_map[cpu]);
+		cpus_clear(cpu_core_map[cpu]);
+	}
+
+	xen_setup_vcpu_info_placement();
+}
+
+void __init xen_smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned cpu;
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		cpus_clear(cpu_sibling_map[cpu]);
+		cpus_clear(cpu_core_map[cpu]);
+	}
+
+	smp_store_cpu_info(0);
+	set_cpu_sibling_map(0);
+
+	if (xen_smp_intr_init(0))
+		BUG();
+
+	cpu_initialized_map = cpumask_of_cpu(0);
+
+	/* Restrict the possible_map according to max_cpus. */
+	while ((num_possible_cpus() > 1) && (num_possible_cpus() > max_cpus)) {
+		for (cpu = NR_CPUS-1; !cpu_isset(cpu, cpu_possible_map); cpu--)
+			continue;
+		cpu_clear(cpu, cpu_possible_map);
+	}
+
+	for_each_possible_cpu (cpu) {
+		struct task_struct *idle;
+
+		if (cpu == 0)
+			continue;
+
+		idle = fork_idle(cpu);
+		if (IS_ERR(idle))
+			panic("failed fork for CPU %d", cpu);
+
+		cpu_set(cpu, cpu_present_map);
+	}
+
+	//init_xenbus_allowed_cpumask();
+}
+
+static __cpuinit int
+cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
+{
+	struct vcpu_guest_context *ctxt;
+	struct gdt_page *gdt = &per_cpu(gdt_page, cpu);
+
+	if (cpu_test_and_set(cpu, cpu_initialized_map))
+		return 0;
+
+	ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL);
+	if (ctxt == NULL)
+		return -ENOMEM;
+
+	ctxt->flags = VGCF_IN_KERNEL;
+	ctxt->user_regs.ds = __USER_DS;
+	ctxt->user_regs.es = __USER_DS;
+	ctxt->user_regs.fs = __KERNEL_PERCPU;
+	ctxt->user_regs.gs = 0;
+	ctxt->user_regs.ss = __KERNEL_DS;
+	ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
+	ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
+
+	memset(&ctxt->fpu_ctxt, 0, sizeof(ctxt->fpu_ctxt));
+
+	xen_copy_trap_info(ctxt->trap_ctxt);
+
+	ctxt->ldt_ents = 0;
+
+	BUG_ON((unsigned long)gdt->gdt & ~PAGE_MASK);
+	make_lowmem_page_readonly(gdt->gdt);
+
+	ctxt->gdt_frames[0] = virt_to_mfn(gdt->gdt);
+	ctxt->gdt_ents      = ARRAY_SIZE(gdt->gdt);
+
+	ctxt->user_regs.cs = __KERNEL_CS;
+	ctxt->user_regs.esp = idle->thread.esp0 - sizeof(struct pt_regs);
+
+	ctxt->kernel_ss = __KERNEL_DS;
+	ctxt->kernel_sp = idle->thread.esp0;
+
+	ctxt->event_callback_cs     = __KERNEL_CS;
+	ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
+	ctxt->failsafe_callback_cs  = __KERNEL_CS;
+	ctxt->failsafe_callback_eip = (unsigned long)xen_failsafe_callback;
+
+	per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
+	ctxt->ctrlreg[3] = xen_pfn_to_cr3(virt_to_mfn(swapper_pg_dir));
+
+	if (HYPERVISOR_vcpu_op(VCPUOP_initialise, cpu, ctxt))
+		BUG();
+
+	kfree(ctxt);
+	return 0;
+}
+
+int __cpuinit xen_cpu_up(unsigned int cpu)
+{
+	struct task_struct *idle = idle_task(cpu);
+	int rc;
+
+#if 0
+	rc = cpu_up_check(cpu);
+	if (rc)
+		return rc;
+#endif
+
+	init_gdt(cpu);
+	per_cpu(current_task, cpu) = idle;
+	irq_ctx_init(cpu);
+	xen_setup_timer(cpu);
+
+	/* make sure interrupts start blocked */
+	per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;
+
+	rc = cpu_initialize_context(cpu, idle);
+	if (rc)
+		return rc;
+
+	if (num_online_cpus() == 1)
+		alternatives_smp_switch(1);
+
+	rc = xen_smp_intr_init(cpu);
+	if (rc)
+		return rc;
+
+	smp_store_cpu_info(cpu);
+	set_cpu_sibling_map(cpu);
+	/* This must be done before setting cpu_online_map */
+	wmb();
+
+	cpu_set(cpu, cpu_online_map);
+
+	rc = HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL);
+	BUG_ON(rc);
+
+	return 0;
+}
+
+void xen_smp_cpus_done(unsigned int max_cpus)
+{
+}
+
+static void stop_self(void *v)
+{
+	int cpu = smp_processor_id();
+
+	/* make sure we're not pinning something down */
+	load_cr3(swapper_pg_dir);
+	/* should set up a minimal gdt */
+
+	HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL);
+	BUG();
+}
+
+void xen_smp_send_stop(void)
+{
+	smp_call_function(stop_self, NULL, 0, 0);
+}
+
+void xen_smp_send_reschedule(int cpu)
+{
+	xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR);
+}
+
+
+static void xen_send_IPI_mask(cpumask_t mask, enum ipi_vector vector)
+{
+	unsigned cpu;
+
+	cpus_and(mask, mask, cpu_online_map);
+
+	for_each_cpu_mask(cpu, mask)
+		xen_send_IPI_one(cpu, vector);
+}
+
+static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id)
+{
+	void (*func) (void *info) = call_data->func;
+	void *info = call_data->info;
+	int wait = call_data->wait;
+
+	/*
+	 * Notify initiating CPU that I've grabbed the data and am
+	 * about to execute the function
+	 */
+	mb();
+	atomic_inc(&call_data->started);
+	/*
+	 * At this point the info structure may be out of scope unless wait==1
+	 */
+	irq_enter();
+	(*func)(info);
+	irq_exit();
+
+	if (wait) {
+		mb();		/* commit everything before setting finished */
+		atomic_inc(&call_data->finished);
+	}
+
+	return IRQ_HANDLED;
+}
+
+int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
+			       void *info, int wait)
+{
+	struct call_data_struct data;
+	int cpus;
+
+	/* Holding any lock stops cpus from going down. */
+	spin_lock(&call_lock);
+
+	cpu_clear(smp_processor_id(), mask);
+
+	cpus = cpus_weight(mask);
+	if (!cpus) {
+		spin_unlock(&call_lock);
+		return 0;
+	}
+
+	/* Can deadlock when called with interrupts disabled */
+	WARN_ON(irqs_disabled());
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	mb();			/* write everything before IPI */
+
+	/* Send a message to other CPUs and wait for them to respond */
+	xen_send_IPI_mask(mask, XEN_CALL_FUNCTION_VECTOR);
+
+	/* Make sure other vcpus get a chance to run.
+	   XXX too severe?  Maybe we should check the other CPU's states? */
+	HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus ||
+	       (wait && atomic_read(&data.finished) != cpus))
+		cpu_relax();
+
+	spin_unlock(&call_lock);
+
+	return 0;
+}
diff --git a/arch/i386/xen/time.c b/arch/i386/xen/time.c
new file mode 100644
index 0000000..51fdabf
--- /dev/null
+++ b/arch/i386/xen/time.c
@@ -0,0 +1,590 @@
+/*
+ * Xen time implementation.
+ *
+ * This is implemented in terms of a clocksource driver which uses
+ * the hypervisor clock as a nanosecond timebase, and a clockevent
+ * driver which uses the hypervisor's timer mechanism.
+ *
+ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/hypercall.h>
+
+#include <xen/events.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/vcpu.h>
+
+#include "xen-ops.h"
+
+#define XEN_SHIFT 22
+
+/* Xen may fire a timer up to this many ns early */
+#define TIMER_SLOP	100000
+#define NS_PER_TICK	(1000000000LL / HZ)
+
+static cycle_t xen_clocksource_read(void);
+
+/* These are perodically updated in shared_info, and then copied here. */
+struct shadow_time_info {
+	u64 tsc_timestamp;     /* TSC at last update of time vals.  */
+	u64 system_timestamp;  /* Time, in nanosecs, since boot.    */
+	u32 tsc_to_nsec_mul;
+	int tsc_shift;
+	u32 version;
+};
+
+static DEFINE_PER_CPU(struct shadow_time_info, shadow_time);
+
+/* runstate info updated by Xen */
+static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate);
+
+/* snapshots of runstate info */
+static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate_snapshot);
+
+/* unused ns of stolen and blocked time */
+static DEFINE_PER_CPU(u64, residual_stolen);
+static DEFINE_PER_CPU(u64, residual_blocked);
+
+/* return an consistent snapshot of 64-bit time/counter value */
+static u64 get64(const u64 *p)
+{
+	u64 ret;
+
+	if (BITS_PER_LONG < 64) {
+		u32 *p32 = (u32 *)p;
+		u32 h, l;
+
+		/*
+		 * Read high then low, and then make sure high is
+		 * still the same; this will only loop if low wraps
+		 * and carries into high.
+		 * XXX some clean way to make this endian-proof?
+		 */
+		do {
+			h = p32[1];
+			barrier();
+			l = p32[0];
+			barrier();
+		} while (p32[1] != h);
+
+		ret = (((u64)h) << 32) | l;
+	} else
+		ret = *p;
+
+	return ret;
+}
+
+/*
+ * Runstate accounting
+ */
+static void get_runstate_snapshot(struct vcpu_runstate_info *res)
+{
+	u64 state_time;
+	struct vcpu_runstate_info *state;
+
+	BUG_ON(preemptible());
+
+	state = &__get_cpu_var(runstate);
+
+	/*
+	 * The runstate info is always updated by the hypervisor on
+	 * the current CPU, so there's no need to use anything
+	 * stronger than a compiler barrier when fetching it.
+	 */
+	do {
+		state_time = get64(&state->state_entry_time);
+		barrier();
+		*res = *state;
+		barrier();
+	} while (get64(&state->state_entry_time) != state_time);
+}
+
+static void setup_runstate_info(int cpu)
+{
+	struct vcpu_register_runstate_memory_area area;
+
+	area.addr.v = &per_cpu(runstate, cpu);
+
+	if (HYPERVISOR_vcpu_op(VCPUOP_register_runstate_memory_area,
+			       cpu, &area))
+		BUG();
+}
+
+static void do_stolen_accounting(void)
+{
+	struct vcpu_runstate_info state;
+	struct vcpu_runstate_info *snap;
+	s64 blocked, runnable, offline, stolen;
+	cputime_t ticks;
+
+	get_runstate_snapshot(&state);
+
+	WARN_ON(state.state != RUNSTATE_running);
+
+	snap = &__get_cpu_var(runstate_snapshot);
+
+	/* work out how much time the VCPU has not been runn*ing*  */
+	blocked = state.time[RUNSTATE_blocked] - snap->time[RUNSTATE_blocked];
+	runnable = state.time[RUNSTATE_runnable] - snap->time[RUNSTATE_runnable];
+	offline = state.time[RUNSTATE_offline] - snap->time[RUNSTATE_offline];
+
+	*snap = state;
+
+	/* Add the appropriate number of ticks of stolen time,
+	   including any left-overs from last time.  Passing NULL to
+	   account_steal_time accounts the time as stolen. */
+	stolen = runnable + offline + __get_cpu_var(residual_stolen);
+
+	if (stolen < 0)
+		stolen = 0;
+
+	ticks = 0;
+	while (stolen >= NS_PER_TICK) {
+		ticks++;
+		stolen -= NS_PER_TICK;
+	}
+	__get_cpu_var(residual_stolen) = stolen;
+	account_steal_time(NULL, ticks);
+
+	/* Add the appropriate number of ticks of blocked time,
+	   including any left-overs from last time.  Passing idle to
+	   account_steal_time accounts the time as idle/wait. */
+	blocked += __get_cpu_var(residual_blocked);
+
+	if (blocked < 0)
+		blocked = 0;
+
+	ticks = 0;
+	while (blocked >= NS_PER_TICK) {
+		ticks++;
+		blocked -= NS_PER_TICK;
+	}
+	__get_cpu_var(residual_blocked) = blocked;
+	account_steal_time(idle_task(smp_processor_id()), ticks);
+}
+
+/*
+ * Xen sched_clock implementation.  Returns the number of unstolen
+ * nanoseconds, which is nanoseconds the VCPU spent in RUNNING+BLOCKED
+ * states.
+ */
+unsigned long long xen_sched_clock(void)
+{
+	struct vcpu_runstate_info state;
+	cycle_t now;
+	u64 ret;
+	s64 offset;
+
+	/*
+	 * Ideally sched_clock should be called on a per-cpu basis
+	 * anyway, so preempt should already be disabled, but that's
+	 * not current practice at the moment.
+	 */
+	preempt_disable();
+
+	now = xen_clocksource_read();
+
+	get_runstate_snapshot(&state);
+
+	WARN_ON(state.state != RUNSTATE_running);
+
+	offset = now - state.state_entry_time;
+	if (offset < 0)
+		offset = 0;
+
+	ret = state.time[RUNSTATE_blocked] +
+		state.time[RUNSTATE_running] +
+		offset;
+
+	preempt_enable();
+
+	return ret;
+}
+
+
+/* Get the CPU speed from Xen */
+unsigned long xen_cpu_khz(void)
+{
+	u64 cpu_khz = 1000000ULL << 32;
+	const struct vcpu_time_info *info =
+		&HYPERVISOR_shared_info->vcpu_info[0].time;
+
+	do_div(cpu_khz, info->tsc_to_system_mul);
+	if (info->tsc_shift < 0)
+		cpu_khz <<= -info->tsc_shift;
+	else
+		cpu_khz >>= info->tsc_shift;
+
+	return cpu_khz;
+}
+
+/*
+ * Reads a consistent set of time-base values from Xen, into a shadow data
+ * area.
+ */
+static unsigned get_time_values_from_xen(void)
+{
+	struct vcpu_time_info   *src;
+	struct shadow_time_info *dst;
+
+	/* src is shared memory with the hypervisor, so we need to
+	   make sure we get a consistent snapshot, even in the face of
+	   being preempted. */
+	src = &__get_cpu_var(xen_vcpu)->time;
+	dst = &__get_cpu_var(shadow_time);
+
+	do {
+		dst->version = src->version;
+		rmb();		/* fetch version before data */
+		dst->tsc_timestamp     = src->tsc_timestamp;
+		dst->system_timestamp  = src->system_time;
+		dst->tsc_to_nsec_mul   = src->tsc_to_system_mul;
+		dst->tsc_shift         = src->tsc_shift;
+		rmb();		/* test version after fetching data */
+	} while ((src->version & 1) | (dst->version ^ src->version));
+
+	return dst->version;
+}
+
+/*
+ * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
+ * yielding a 64-bit result.
+ */
+static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
+{
+	u64 product;
+#ifdef __i386__
+	u32 tmp1, tmp2;
+#endif
+
+	if (shift < 0)
+		delta >>= -shift;
+	else
+		delta <<= shift;
+
+#ifdef __i386__
+	__asm__ (
+		"mul  %5       ; "
+		"mov  %4,%%eax ; "
+		"mov  %%edx,%4 ; "
+		"mul  %5       ; "
+		"xor  %5,%5    ; "
+		"add  %4,%%eax ; "
+		"adc  %5,%%edx ; "
+		: "=A" (product), "=r" (tmp1), "=r" (tmp2)
+		: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
+#elif __x86_64__
+	__asm__ (
+		"mul %%rdx ; shrd $32,%%rdx,%%rax"
+		: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
+#else
+#error implement me!
+#endif
+
+	return product;
+}
+
+static u64 get_nsec_offset(struct shadow_time_info *shadow)
+{
+	u64 now, delta;
+	now = native_read_tsc();
+	delta = now - shadow->tsc_timestamp;
+	return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift);
+}
+
+static cycle_t xen_clocksource_read(void)
+{
+	struct shadow_time_info *shadow = &get_cpu_var(shadow_time);
+	cycle_t ret;
+	unsigned version;
+
+	do {
+		version = get_time_values_from_xen();
+		barrier();
+		ret = shadow->system_timestamp + get_nsec_offset(shadow);
+		barrier();
+	} while (version != __get_cpu_var(xen_vcpu)->time.version);
+
+	put_cpu_var(shadow_time);
+
+	return ret;
+}
+
+static void xen_read_wallclock(struct timespec *ts)
+{
+	const struct shared_info *s = HYPERVISOR_shared_info;
+	u32 version;
+	u64 delta;
+	struct timespec now;
+
+	/* get wallclock at system boot */
+	do {
+		version = s->wc_version;
+		rmb();		/* fetch version before time */
+		now.tv_sec  = s->wc_sec;
+		now.tv_nsec = s->wc_nsec;
+		rmb();		/* fetch time before checking version */
+	} while ((s->wc_version & 1) | (version ^ s->wc_version));
+
+	delta = xen_clocksource_read();	/* time since system boot */
+	delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec;
+
+	now.tv_nsec = do_div(delta, NSEC_PER_SEC);
+	now.tv_sec = delta;
+
+	set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
+}
+
+unsigned long xen_get_wallclock(void)
+{
+	struct timespec ts;
+
+	xen_read_wallclock(&ts);
+
+	return ts.tv_sec;
+}
+
+int xen_set_wallclock(unsigned long now)
+{
+	/* do nothing for domU */
+	return -1;
+}
+
+static struct clocksource xen_clocksource __read_mostly = {
+	.name = "xen",
+	.rating = 400,
+	.read = xen_clocksource_read,
+	.mask = ~0,
+	.mult = 1<<XEN_SHIFT,		/* time directly in nanoseconds */
+	.shift = XEN_SHIFT,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+   Xen clockevent implementation
+
+   Xen has two clockevent implementations:
+
+   The old timer_op one works with all released versions of Xen prior
+   to version 3.0.4.  This version of the hypervisor provides a
+   single-shot timer with nanosecond resolution.  However, sharing the
+   same event channel is a 100Hz tick which is delivered while the
+   vcpu is running.  We don't care about or use this tick, but it will
+   cause the core time code to think the timer fired too soon, and
+   will end up resetting it each time.  It could be filtered, but
+   doing so has complications when the ktime clocksource is not yet
+   the xen clocksource (ie, at boot time).
+
+   The new vcpu_op-based timer interface allows the tick timer period
+   to be changed or turned off.  The tick timer is not useful as a
+   periodic timer because events are only delivered to running vcpus.
+   The one-shot timer can report when a timeout is in the past, so
+   set_next_event is capable of returning -ETIME when appropriate.
+   This interface is used when available.
+*/
+
+
+/*
+  Get a hypervisor absolute time.  In theory we could maintain an
+  offset between the kernel's time and the hypervisor's time, and
+  apply that to a kernel's absolute timeout.  Unfortunately the
+  hypervisor and kernel times can drift even if the kernel is using
+  the Xen clocksource, because ntp can warp the kernel's clocksource.
+*/
+static s64 get_abs_timeout(unsigned long delta)
+{
+	return xen_clocksource_read() + delta;
+}
+
+static void xen_timerop_set_mode(enum clock_event_mode mode,
+				 struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* unsupported */
+		WARN_ON(1);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		HYPERVISOR_set_timer_op(0);  /* cancel timeout */
+		break;
+	}
+}
+
+static int xen_timerop_set_next_event(unsigned long delta,
+				      struct clock_event_device *evt)
+{
+	WARN_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT);
+
+	if (HYPERVISOR_set_timer_op(get_abs_timeout(delta)) < 0)
+		BUG();
+
+	/* We may have missed the deadline, but there's no real way of
+	   knowing for sure.  If the event was in the past, then we'll
+	   get an immediate interrupt. */
+
+	return 0;
+}
+
+static const struct clock_event_device xen_timerop_clockevent = {
+	.name = "xen",
+	.features = CLOCK_EVT_FEAT_ONESHOT,
+
+	.max_delta_ns = 0xffffffff,
+	.min_delta_ns = TIMER_SLOP,
+
+	.mult = 1,
+	.shift = 0,
+	.rating = 500,
+
+	.set_mode = xen_timerop_set_mode,
+	.set_next_event = xen_timerop_set_next_event,
+};
+
+
+
+static void xen_vcpuop_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	int cpu = smp_processor_id();
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		WARN_ON(1);	/* unsupported */
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL))
+			BUG();
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		if (HYPERVISOR_vcpu_op(VCPUOP_stop_singleshot_timer, cpu, NULL) ||
+		    HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL))
+			BUG();
+		break;
+	}
+}
+
+static int xen_vcpuop_set_next_event(unsigned long delta,
+				     struct clock_event_device *evt)
+{
+	int cpu = smp_processor_id();
+	struct vcpu_set_singleshot_timer single;
+	int ret;
+
+	WARN_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT);
+
+	single.timeout_abs_ns = get_abs_timeout(delta);
+	single.flags = VCPU_SSHOTTMR_future;
+
+	ret = HYPERVISOR_vcpu_op(VCPUOP_set_singleshot_timer, cpu, &single);
+
+	BUG_ON(ret != 0 && ret != -ETIME);
+
+	return ret;
+}
+
+static const struct clock_event_device xen_vcpuop_clockevent = {
+	.name = "xen",
+	.features = CLOCK_EVT_FEAT_ONESHOT,
+
+	.max_delta_ns = 0xffffffff,
+	.min_delta_ns = TIMER_SLOP,
+
+	.mult = 1,
+	.shift = 0,
+	.rating = 500,
+
+	.set_mode = xen_vcpuop_set_mode,
+	.set_next_event = xen_vcpuop_set_next_event,
+};
+
+static const struct clock_event_device *xen_clockevent =
+	&xen_timerop_clockevent;
+static DEFINE_PER_CPU(struct clock_event_device, xen_clock_events);
+
+static irqreturn_t xen_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &__get_cpu_var(xen_clock_events);
+	irqreturn_t ret;
+
+	ret = IRQ_NONE;
+	if (evt->event_handler) {
+		evt->event_handler(evt);
+		ret = IRQ_HANDLED;
+	}
+
+	do_stolen_accounting();
+
+	return ret;
+}
+
+void xen_setup_timer(int cpu)
+{
+	const char *name;
+	struct clock_event_device *evt;
+	int irq;
+
+	printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu);
+
+	name = kasprintf(GFP_KERNEL, "timer%d", cpu);
+	if (!name)
+		name = "<timer kasprintf failed>";
+
+	irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt,
+				      IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				      name, NULL);
+
+	evt = &per_cpu(xen_clock_events, cpu);
+	memcpy(evt, xen_clockevent, sizeof(*evt));
+
+	evt->cpumask = cpumask_of_cpu(cpu);
+	evt->irq = irq;
+
+	setup_runstate_info(cpu);
+}
+
+void xen_setup_cpu_clockevents(void)
+{
+	BUG_ON(preemptible());
+
+	clockevents_register_device(&__get_cpu_var(xen_clock_events));
+}
+
+__init void xen_time_init(void)
+{
+	int cpu = smp_processor_id();
+
+	get_time_values_from_xen();
+
+	clocksource_register(&xen_clocksource);
+
+	if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
+		/* Successfully turned off 100Hz tick, so we have the
+		   vcpuop-based timer interface */
+		printk(KERN_DEBUG "Xen: using vcpuop timer interface\n");
+		xen_clockevent = &xen_vcpuop_clockevent;
+	}
+
+	/* Set initial system time with full resolution */
+	xen_read_wallclock(&xtime);
+	set_normalized_timespec(&wall_to_monotonic,
+				-xtime.tv_sec, -xtime.tv_nsec);
+
+	tsc_disable = 0;
+
+	xen_setup_timer(cpu);
+	xen_setup_cpu_clockevents();
+}
diff --git a/arch/i386/xen/xen-asm.S b/arch/i386/xen/xen-asm.S
new file mode 100644
index 0000000..1a43b60
--- /dev/null
+++ b/arch/i386/xen/xen-asm.S
@@ -0,0 +1,291 @@
+/*
+	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
+	The inline versions are the same as the direct-use versions, with the
+	pre- and post-amble chopped off.
+
+	This code is encoded for size rather than absolute efficiency,
+	with a view to being able to inline as much as possible.
+
+	We only bother with direct forms (ie, vcpu in pda) of the operations
+	here; the indirect forms are better handled in C, since they're
+	generally too large to inline anyway.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/percpu.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+#include <xen/interface/xen.h>
+
+#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
+#define ENDPATCH(x)	.globl x##_end; x##_end=.
+
+/* Pseudo-flag used for virtual NMI, which we don't implement yet */
+#define XEN_EFLAGS_NMI	0x80000000
+
+/*
+	Enable events.  This clears the event mask and tests the pending
+	event status with one and operation.  If there are pending
+	events, then enter the hypervisor to get them handled.
+ */
+ENTRY(xen_irq_enable_direct)
+	/* Clear mask and test pending */
+	andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+	jz 1f
+2:	call check_events
+1:
+ENDPATCH(xen_irq_enable_direct)
+	ret
+	ENDPROC(xen_irq_enable_direct)
+	RELOC(xen_irq_enable_direct, 2b+1)
+
+
+/*
+	Disabling events is simply a matter of making the event mask
+	non-zero.
+ */
+ENTRY(xen_irq_disable_direct)
+	movb $1, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+ENDPATCH(xen_irq_disable_direct)
+	ret
+	ENDPROC(xen_irq_disable_direct)
+	RELOC(xen_irq_disable_direct, 0)
+
+/*
+	(xen_)save_fl is used to get the current interrupt enable status.
+	Callers expect the status to be in X86_EFLAGS_IF, and other bits
+	may be set in the return value.  We take advantage of this by
+	making sure that X86_EFLAGS_IF has the right value (and other bits
+	in that byte are 0), but other bits in the return value are
+	undefined.  We need to toggle the state of the bit, because
+	Xen and x86 use opposite senses (mask vs enable).
+ */
+ENTRY(xen_save_fl_direct)
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+	setz %ah
+	addb %ah,%ah
+ENDPATCH(xen_save_fl_direct)
+	ret
+	ENDPROC(xen_save_fl_direct)
+	RELOC(xen_save_fl_direct, 0)
+
+
+/*
+	In principle the caller should be passing us a value return
+	from xen_save_fl_direct, but for robustness sake we test only
+	the X86_EFLAGS_IF flag rather than the whole byte. After
+	setting the interrupt mask state, it checks for unmasked
+	pending events and enters the hypervisor to get them delivered
+	if so.
+ */
+ENTRY(xen_restore_fl_direct)
+	testb $X86_EFLAGS_IF>>8, %ah
+	setz PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* check for unmasked and pending */
+	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	jz 1f
+2:	call check_events
+1:
+ENDPATCH(xen_restore_fl_direct)
+	ret
+	ENDPROC(xen_restore_fl_direct)
+	RELOC(xen_restore_fl_direct, 2b+1)
+
+/*
+	This is run where a normal iret would be run, with the same stack setup:
+	      8: eflags
+	      4: cs
+	esp-> 0: eip
+
+	This attempts to make sure that any pending events are dealt
+	with on return to usermode, but there is a small window in
+	which an event can happen just before entering usermode.  If
+	the nested interrupt ends up setting one of the TIF_WORK_MASK
+	pending work flags, they will not be tested again before
+	returning to usermode. This means that a process can end up
+	with pending work, which will be unprocessed until the process
+	enters and leaves the kernel again, which could be an
+	unbounded amount of time.  This means that a pending signal or
+	reschedule event could be indefinitely delayed.
+
+	The fix is to notice a nested interrupt in the critical
+	window, and if one occurs, then fold the nested interrupt into
+	the current interrupt stack frame, and re-process it
+	iteratively rather than recursively.  This means that it will
+	exit via the normal path, and all pending work will be dealt
+	with appropriately.
+
+	Because the nested interrupt handler needs to deal with the
+	current stack state in whatever form its in, we keep things
+	simple by only using a single register which is pushed/popped
+	on the stack.
+
+	Non-direct iret could be done in the same way, but it would
+	require an annoying amount of code duplication.  We'll assume
+	that direct mode will be the common case once the hypervisor
+	support becomes commonplace.
+ */
+ENTRY(xen_iret_direct)
+	/* test eflags for special cases */
+	testl $(X86_EFLAGS_VM | XEN_EFLAGS_NMI), 8(%esp)
+	jnz hyper_iret
+
+	push %eax
+	ESP_OFFSET=4	# bytes pushed onto stack
+
+	/* Store vcpu_info pointer for easy access.  Do it this
+	   way to avoid having to reload %fs */
+#ifdef CONFIG_SMP
+	GET_THREAD_INFO(%eax)
+	movl TI_cpu(%eax),%eax
+	movl __per_cpu_offset(,%eax,4),%eax
+	lea per_cpu__xen_vcpu_info(%eax),%eax
+#else
+	movl $per_cpu__xen_vcpu_info, %eax
+#endif
+
+	/* check IF state we're restoring */
+	testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp)
+
+	/* Maybe enable events.  Once this happens we could get a
+	   recursive event, so the critical region starts immediately
+	   afterwards.  However, if that happens we don't end up
+	   resuming the code, so we don't have to be worried about
+	   being preempted to another CPU. */
+	setz XEN_vcpu_info_mask(%eax)
+xen_iret_start_crit:
+
+	/* check for unmasked and pending */
+	cmpw $0x0001, XEN_vcpu_info_pending(%eax)
+
+	/* If there's something pending, mask events again so we
+	   can jump back into xen_hypervisor_callback */
+	sete XEN_vcpu_info_mask(%eax)
+
+	popl %eax
+
+	/* From this point on the registers are restored and the stack
+	   updated, so we don't need to worry about it if we're preempted */
+iret_restore_end:
+
+	/* Jump to hypervisor_callback after fixing up the stack.
+	   Events are masked, so jumping out of the critical
+	   region is OK. */
+	je xen_hypervisor_callback
+
+	iret
+xen_iret_end_crit:
+
+hyper_iret:
+	/* put this out of line since its very rarely used */
+	jmp hypercall_page + __HYPERVISOR_iret * 32
+
+	.globl xen_iret_start_crit, xen_iret_end_crit
+
+/*
+   This is called by xen_hypervisor_callback in entry.S when it sees
+   that the EIP at the time of interrupt was between xen_iret_start_crit
+   and xen_iret_end_crit.  We're passed the EIP in %eax so we can do
+   a more refined determination of what to do.
+
+   The stack format at this point is:
+	----------------
+	 ss		: (ss/esp may be present if we came from usermode)
+	 esp		:
+	 eflags		}  outer exception info
+	 cs		}
+	 eip		}
+	---------------- <- edi (copy dest)
+	 eax		:  outer eax if it hasn't been restored
+	----------------
+	 eflags		}  nested exception info
+	 cs		}   (no ss/esp because we're nested
+	 eip		}    from the same ring)
+	 orig_eax	}<- esi (copy src)
+	 - - - - - - - -
+	 fs		}
+	 es		}
+	 ds		}  SAVE_ALL state
+	 eax		}
+	  :		:
+	 ebx		}
+	----------------
+	 return addr	 <- esp
+	----------------
+
+   In order to deliver the nested exception properly, we need to shift
+   everything from the return addr up to the error code so it
+   sits just under the outer exception info.  This means that when we
+   handle the exception, we do it in the context of the outer exception
+   rather than starting a new one.
+
+   The only caveat is that if the outer eax hasn't been
+   restored yet (ie, it's still on stack), we need to insert
+   its value into the SAVE_ALL state before going on, since
+   it's usermode state which we eventually need to restore.
+ */
+ENTRY(xen_iret_crit_fixup)
+	/* offsets +4 for return address */
+
+	/*
+	   Paranoia: Make sure we're really coming from userspace.
+	   One could imagine a case where userspace jumps into the
+	   critical range address, but just before the CPU delivers a GP,
+	   it decides to deliver an interrupt instead.  Unlikely?
+	   Definitely.  Easy to avoid?  Yes.  The Intel documents
+	   explicitly say that the reported EIP for a bad jump is the
+	   jump instruction itself, not the destination, but some virtual
+	   environments get this wrong.
+	 */
+	movl PT_CS+4(%esp), %ecx
+	andl $SEGMENT_RPL_MASK, %ecx
+	cmpl $USER_RPL, %ecx
+	je 2f
+
+	lea PT_ORIG_EAX+4(%esp), %esi
+	lea PT_EFLAGS+4(%esp), %edi
+
+	/* If eip is before iret_restore_end then stack
+	   hasn't been restored yet. */
+	cmp $iret_restore_end, %eax
+	jae 1f
+
+	movl 0+4(%edi),%eax		/* copy EAX */
+	movl %eax, PT_EAX+4(%esp)
+
+	lea ESP_OFFSET(%edi),%edi	/* move dest up over saved regs */
+
+	/* set up the copy */
+1:	std
+	mov $(PT_EIP+4) / 4, %ecx	/* copy ret+saved regs up to orig_eax */
+	rep movsl
+	cld
+
+	lea 4(%edi),%esp		/* point esp to new frame */
+2:	ret
+
+
+/*
+	Force an event check by making a hypercall,
+	but preserve regs before making the call.
+ */
+check_events:
+	push %eax
+	push %ecx
+	push %edx
+	call force_evtchn_callback
+	pop %edx
+	pop %ecx
+	pop %eax
+	ret
diff --git a/arch/i386/xen/xen-head.S b/arch/i386/xen/xen-head.S
new file mode 100644
index 0000000..2998d55
--- /dev/null
+++ b/arch/i386/xen/xen-head.S
@@ -0,0 +1,36 @@
+/* Xen-specific pieces of head.S, intended to be included in the right
+	place in head.S */
+
+#ifdef CONFIG_XEN
+
+#include <linux/elfnote.h>
+#include <asm/boot.h>
+#include <xen/interface/elfnote.h>
+
+ENTRY(startup_xen)
+	movl %esi,xen_start_info
+	cld
+	movl $(init_thread_union+THREAD_SIZE),%esp
+	jmp xen_start_kernel
+
+.pushsection ".bss.page_aligned"
+	.align PAGE_SIZE_asm
+ENTRY(hypercall_page)
+	.skip 0x1000
+.popsection
+
+	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
+	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,  .asciz "2.6")
+	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,    .asciz "xen-3.0")
+	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      .long  __PAGE_OFFSET)
+	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          .long  startup_xen)
+	ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long  hypercall_page)
+	ELFNOTE(Xen, XEN_ELFNOTE_FEATURES,       .asciz "!writable_page_tables|pae_pgdir_above_4gb")
+#ifdef CONFIG_X86_PAE
+	ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE,       .asciz "yes")
+#else
+	ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE,       .asciz "no")
+#endif
+	ELFNOTE(Xen, XEN_ELFNOTE_LOADER,         .asciz "generic")
+
+#endif /*CONFIG_XEN */
diff --git a/arch/i386/xen/xen-ops.h b/arch/i386/xen/xen-ops.h
new file mode 100644
index 0000000..b9aaea4
--- /dev/null
+++ b/arch/i386/xen/xen-ops.h
@@ -0,0 +1,71 @@
+#ifndef XEN_OPS_H
+#define XEN_OPS_H
+
+#include <linux/init.h>
+
+/* These are code, but not functions.  Defined in entry.S */
+extern const char xen_hypervisor_callback[];
+extern const char xen_failsafe_callback[];
+
+void xen_copy_trap_info(struct trap_info *traps);
+
+DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu);
+DECLARE_PER_CPU(unsigned long, xen_cr3);
+
+extern struct start_info *xen_start_info;
+extern struct shared_info *HYPERVISOR_shared_info;
+
+char * __init xen_memory_setup(void);
+void __init xen_arch_setup(void);
+void __init xen_init_IRQ(void);
+
+void xen_setup_timer(int cpu);
+void xen_setup_cpu_clockevents(void);
+unsigned long xen_cpu_khz(void);
+void __init xen_time_init(void);
+unsigned long xen_get_wallclock(void);
+int xen_set_wallclock(unsigned long time);
+unsigned long long xen_sched_clock(void);
+
+void xen_mark_init_mm_pinned(void);
+
+DECLARE_PER_CPU(enum paravirt_lazy_mode, xen_lazy_mode);
+
+static inline unsigned xen_get_lazy_mode(void)
+{
+	return x86_read_percpu(xen_lazy_mode);
+}
+
+void __init xen_fill_possible_map(void);
+
+void __init xen_setup_vcpu_info_placement(void);
+void xen_smp_prepare_boot_cpu(void);
+void xen_smp_prepare_cpus(unsigned int max_cpus);
+int xen_cpu_up(unsigned int cpu);
+void xen_smp_cpus_done(unsigned int max_cpus);
+
+void xen_smp_send_stop(void);
+void xen_smp_send_reschedule(int cpu);
+int xen_smp_call_function (void (*func) (void *info), void *info, int nonatomic,
+			   int wait);
+int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+				 int nonatomic, int wait);
+
+int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
+			       void *info, int wait);
+
+
+/* Declare an asm function, along with symbols needed to make it
+   inlineable */
+#define DECL_ASM(ret, name, ...)		\
+	ret name(__VA_ARGS__);			\
+	extern char name##_end[];		\
+	extern char name##_reloc[]		\
+
+DECL_ASM(void, xen_irq_enable_direct, void);
+DECL_ASM(void, xen_irq_disable_direct, void);
+DECL_ASM(unsigned long, xen_save_fl_direct, void);
+DECL_ASM(void, xen_restore_fl_direct, unsigned long);
+
+void xen_iret_direct(void);
+#endif /* XEN_OPS_H */
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 2f0e4c0..5600318 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -26,6 +26,7 @@
 #include <linux/tty.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/serial_8250.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c
index ea96552..ed58c13 100644
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ b/arch/mips/gt64120/wrppmc/setup.c
@@ -14,6 +14,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/pm.h>
 
 #include <asm/io.h>
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 1cc6ebb..c68358a 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -22,6 +22,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
index bb80140..5f70eaf 100644
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -23,6 +23,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c
index 60e6690..17819b5 100644
--- a/arch/mips/mipssim/sim_setup.c
+++ b/arch/mips/mipssim/sim_setup.c
@@ -26,6 +26,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index c41b53f..e25bac5 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/serial.h>
+#include <linux/serial_8250.h>
 
 #include <msp_prom.h>
 #include <msp_int.h>
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 6a6e15e..f7f93ae 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -39,6 +39,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/time.h>
 #include <asm/bootinfo.h>
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index faf5ef3..94b4a02 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -156,11 +156,14 @@
 #endif /* CONFIG_PPC_OF */
 
 /* Add sysfs properties */
-void pcibios_add_platform_entries(struct pci_dev *pdev)
+int pcibios_add_platform_entries(struct pci_dev *pdev)
 {
 #ifdef CONFIG_PPC_OF
-	device_create_file(&pdev->dev, &dev_attr_devspec);
+	return device_create_file(&pdev->dev, &dev_attr_devspec);
+#else
+	return 0;
 #endif /* CONFIG_PPC_OF */
+
 }
 
 char __init *pcibios_setup(char *str)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index bc43bba..6018178 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -350,11 +350,13 @@
 {
 	DBG(" -> setup_system()\n");
 
-	/* Apply CPUs-specific fixups to kernel text (nop out sections
-	 * not relevant to this CPU)
+	/* Apply the CPUs-specific and firmware specific fixups to kernel
+	 * text (nop out sections not relevant to this CPU or this firmware)
 	 */
 	do_feature_fixups(cur_cpu_spec->cpu_features,
 			  &__start___ftr_fixup, &__stop___ftr_fixup);
+	do_feature_fixups(powerpc_firmware_features,
+			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
 
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
@@ -392,12 +394,6 @@
 	if (ppc_md.init_early)
 		ppc_md.init_early();
 
-	/* Apply firmware specific fixups to kernel text (nop out
-	 * sections not relevant to this firmware)
-	 */
-	do_feature_fixups(powerpc_firmware_features,
-			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
-
  	/*
 	 * We can discover serial ports now since the above did setup the
 	 * hash table management for us, thus ioremap works. We do that early
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
index 349660b..017623c 100644
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -29,6 +29,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/ethtool.h>
 
 #include <asm/system.h>
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
index 1a7f075..cd696be 100644
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ b/arch/ppc/platforms/4xx/bubinga.c
@@ -21,6 +21,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pci-bridge.h>
diff --git a/arch/ppc/platforms/4xx/cpci405.c b/arch/ppc/platforms/4xx/cpci405.c
index 8474b05..2e7e25d 100644
--- a/arch/ppc/platforms/4xx/cpci405.c
+++ b/arch/ppc/platforms/4xx/cpci405.c
@@ -23,6 +23,7 @@
 #include <asm/todc.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <asm/ocp.h>
 #include <asm/ibm_ocp_pci.h>
 #include <platforms/4xx/ibm405gp.h>
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index f0f9cc8..05d7184 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -32,6 +32,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index 61706ef..4b16961 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -30,6 +30,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 5e994e1..fd0f971 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -30,6 +30,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
index 5d9af8d..888c492 100644
--- a/arch/ppc/platforms/4xx/taishan.c
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -30,6 +30,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
index 346787d..a83b0ba 100644
--- a/arch/ppc/platforms/4xx/yucca.c
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -31,6 +31,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
index 1d10ab9..3d7addb 100644
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ b/arch/ppc/platforms/85xx/sbc8560.c
@@ -26,6 +26,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>	/* for linux/serial_core.h */
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/initrd.h>
 #include <linux/module.h>
 #include <linux/fsl_devices.h>
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
index a764ae7..248684f 100644
--- a/arch/ppc/platforms/chestnut.c
+++ b/arch/ppc/platforms/chestnut.c
@@ -25,6 +25,7 @@
 #include <linux/ide.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
index 4957a7b..976270d 100644
--- a/arch/ppc/platforms/ev64260.c
+++ b/arch/ppc/platforms/ev64260.c
@@ -35,6 +35,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #else
 #include <linux/mv643xx.h>
 #endif
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index b558607..44d4398 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -35,6 +35,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>		/* for linux/serial_core.h */
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/mv643xx.h>
 #include <linux/netdevice.h>
 #include <linux/platform_device.h>
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
index 3c78427..f4de50b 100644
--- a/arch/ppc/platforms/spruce.c
+++ b/arch/ppc/platforms/spruce.c
@@ -27,6 +27,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c
index 296d2b0..fd9aff3 100644
--- a/arch/x86_64/kernel/early_printk.c
+++ b/arch/x86_64/kernel/early_printk.c
@@ -6,6 +6,7 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/fcntl.h>
+#include <xen/hvc-console.h>
 
 /* Simple VGA output */
 
@@ -242,6 +243,10 @@
  		simnow_init(buf + 6);
  		early_console = &simnow_console;
  		keep_early = 1;
+#ifdef CONFIG_HVC_XEN
+	} else if (!strncmp(buf, "xen", 3)) {
+		early_console = &xenboot_console;
+#endif
 	}
 
 	if (keep_early)
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index aa1d159..f3fb817 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -174,7 +174,7 @@
 	if (events != atomic_read(&mce_logged) && trigger[0]) {
 		/* Small race window, but should be harmless.  */
 		atomic_set(&mce_logged, events);
-		call_usermodehelper(trigger, trigger_argv, NULL, -1);
+		call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
 	}
 }
 
diff --git a/drivers/Makefile b/drivers/Makefile
index 503d825..6d9d7fa 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -15,6 +15,8 @@
 obj-$(CONFIG_PNP)		+= pnp/
 obj-$(CONFIG_ARM_AMBA)		+= amba/
 
+obj-$(CONFIG_XEN)		+= xen/
+
 # char/ comes before serial/ etc so that the VT console is the boot-time
 # default.
 obj-y				+= char/
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 88a6fc7..58f1338 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -40,6 +40,7 @@
 #include <linux/jiffies.h>
 #include <linux/kmod.h>
 #include <linux/seq_file.h>
+#include <linux/reboot.h>
 #include <asm/uaccess.h>
 
 #include <acpi/acpi_bus.h>
@@ -59,7 +60,6 @@
 #define ACPI_THERMAL_NOTIFY_CRITICAL	0xF0
 #define ACPI_THERMAL_NOTIFY_HOT		0xF1
 #define ACPI_THERMAL_MODE_ACTIVE	0x00
-#define ACPI_THERMAL_PATH_POWEROFF	"/sbin/poweroff"
 
 #define ACPI_THERMAL_MAX_ACTIVE	10
 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
@@ -419,26 +419,6 @@
 	return 0;
 }
 
-static int acpi_thermal_call_usermode(char *path)
-{
-	char *argv[2] = { NULL, NULL };
-	char *envp[3] = { NULL, NULL, NULL };
-
-
-	if (!path)
-		return -EINVAL;
-
-	argv[0] = path;
-
-	/* minimal command environment */
-	envp[0] = "HOME=/";
-	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-
-	call_usermodehelper(argv[0], argv, envp, 0);
-
-	return 0;
-}
-
 static int acpi_thermal_critical(struct acpi_thermal *tz)
 {
 	if (!tz || !tz->trips.critical.flags.valid)
@@ -456,7 +436,7 @@
 	acpi_bus_generate_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
 				tz->trips.critical.flags.enabled);
 
-	acpi_thermal_call_usermode(ACPI_THERMAL_PATH_POWEROFF);
+	orderly_poweroff(true);
 
 	return 0;
 }
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 8f65b88..a4a3119 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -427,4 +427,13 @@
 	help
 	  Include support for the Xilinx SystemACE CompactFlash interface
 
+config XEN_BLKDEV_FRONTEND
+	tristate "Xen virtual block device support"
+	depends on XEN
+	default y
+	help
+	  This driver implements the front-end of the Xen virtual
+	  block device driver.  It communicates with a back-end driver
+	  in another domain which drives the actual block device.
+
 endif # BLK_DEV
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 9ee08ab..3e31532 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -29,3 +29,4 @@
 obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
 obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
 
+obj-$(CONFIG_XEN_BLKDEV_FRONTEND)	+= xen-blkfront.o
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
new file mode 100644
index 0000000..6746c29
--- /dev/null
+++ b/drivers/block/xen-blkfront.c
@@ -0,0 +1,988 @@
+/*
+ * blkfront.c
+ *
+ * XenLinux virtual block device driver.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser & Steve Hand
+ * Modifications by Mark A. Williamson are (c) Intel Research Cambridge
+ * Copyright (c) 2004, Christian Limpach
+ * Copyright (c) 2004, Andrew Warfield
+ * Copyright (c) 2005, Christopher Clark
+ * Copyright (c) 2005, XenSource Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/module.h>
+
+#include <xen/xenbus.h>
+#include <xen/grant_table.h>
+#include <xen/events.h>
+#include <xen/page.h>
+
+#include <xen/interface/grant_table.h>
+#include <xen/interface/io/blkif.h>
+
+#include <asm/xen/hypervisor.h>
+
+enum blkif_state {
+	BLKIF_STATE_DISCONNECTED,
+	BLKIF_STATE_CONNECTED,
+	BLKIF_STATE_SUSPENDED,
+};
+
+struct blk_shadow {
+	struct blkif_request req;
+	unsigned long request;
+	unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+};
+
+static struct block_device_operations xlvbd_block_fops;
+
+#define BLK_RING_SIZE __RING_SIZE((struct blkif_sring *)0, PAGE_SIZE)
+
+/*
+ * We have one of these per vbd, whether ide, scsi or 'other'.  They
+ * hang in private_data off the gendisk structure. We may end up
+ * putting all kinds of interesting stuff here :-)
+ */
+struct blkfront_info
+{
+	struct xenbus_device *xbdev;
+	dev_t dev;
+	struct gendisk *gd;
+	int vdevice;
+	blkif_vdev_t handle;
+	enum blkif_state connected;
+	int ring_ref;
+	struct blkif_front_ring ring;
+	unsigned int evtchn, irq;
+	struct request_queue *rq;
+	struct work_struct work;
+	struct gnttab_free_callback callback;
+	struct blk_shadow shadow[BLK_RING_SIZE];
+	unsigned long shadow_free;
+	int feature_barrier;
+
+	/**
+	 * The number of people holding this device open.  We won't allow a
+	 * hot-unplug unless this is 0.
+	 */
+	int users;
+};
+
+static DEFINE_SPINLOCK(blkif_io_lock);
+
+#define MAXIMUM_OUTSTANDING_BLOCK_REQS \
+	(BLKIF_MAX_SEGMENTS_PER_REQUEST * BLK_RING_SIZE)
+#define GRANT_INVALID_REF	0
+
+#define PARTS_PER_DISK		16
+
+#define BLKIF_MAJOR(dev) ((dev)>>8)
+#define BLKIF_MINOR(dev) ((dev) & 0xff)
+
+#define DEV_NAME	"xvd"	/* name in /dev */
+
+/* Information about our VBDs. */
+#define MAX_VBDS 64
+static LIST_HEAD(vbds_list);
+
+static int get_id_from_freelist(struct blkfront_info *info)
+{
+	unsigned long free = info->shadow_free;
+	BUG_ON(free > BLK_RING_SIZE);
+	info->shadow_free = info->shadow[free].req.id;
+	info->shadow[free].req.id = 0x0fffffee; /* debug */
+	return free;
+}
+
+static void add_id_to_freelist(struct blkfront_info *info,
+			       unsigned long id)
+{
+	info->shadow[id].req.id  = info->shadow_free;
+	info->shadow[id].request = 0;
+	info->shadow_free = id;
+}
+
+static void blkif_restart_queue_callback(void *arg)
+{
+	struct blkfront_info *info = (struct blkfront_info *)arg;
+	schedule_work(&info->work);
+}
+
+/*
+ * blkif_queue_request
+ *
+ * request block io
+ *
+ * id: for guest use only.
+ * operation: BLKIF_OP_{READ,WRITE,PROBE}
+ * buffer: buffer to read/write into. this should be a
+ *   virtual address in the guest os.
+ */
+static int blkif_queue_request(struct request *req)
+{
+	struct blkfront_info *info = req->rq_disk->private_data;
+	unsigned long buffer_mfn;
+	struct blkif_request *ring_req;
+	struct bio *bio;
+	struct bio_vec *bvec;
+	int idx;
+	unsigned long id;
+	unsigned int fsect, lsect;
+	int ref;
+	grant_ref_t gref_head;
+
+	if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
+		return 1;
+
+	if (gnttab_alloc_grant_references(
+		BLKIF_MAX_SEGMENTS_PER_REQUEST, &gref_head) < 0) {
+		gnttab_request_free_callback(
+			&info->callback,
+			blkif_restart_queue_callback,
+			info,
+			BLKIF_MAX_SEGMENTS_PER_REQUEST);
+		return 1;
+	}
+
+	/* Fill out a communications ring structure. */
+	ring_req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt);
+	id = get_id_from_freelist(info);
+	info->shadow[id].request = (unsigned long)req;
+
+	ring_req->id = id;
+	ring_req->sector_number = (blkif_sector_t)req->sector;
+	ring_req->handle = info->handle;
+
+	ring_req->operation = rq_data_dir(req) ?
+		BLKIF_OP_WRITE : BLKIF_OP_READ;
+	if (blk_barrier_rq(req))
+		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
+
+	ring_req->nr_segments = 0;
+	rq_for_each_bio (bio, req) {
+		bio_for_each_segment (bvec, bio, idx) {
+			BUG_ON(ring_req->nr_segments
+			       == BLKIF_MAX_SEGMENTS_PER_REQUEST);
+			buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
+			fsect = bvec->bv_offset >> 9;
+			lsect = fsect + (bvec->bv_len >> 9) - 1;
+			/* install a grant reference. */
+			ref = gnttab_claim_grant_reference(&gref_head);
+			BUG_ON(ref == -ENOSPC);
+
+			gnttab_grant_foreign_access_ref(
+				ref,
+				info->xbdev->otherend_id,
+				buffer_mfn,
+				rq_data_dir(req) );
+
+			info->shadow[id].frame[ring_req->nr_segments] =
+				mfn_to_pfn(buffer_mfn);
+
+			ring_req->seg[ring_req->nr_segments] =
+				(struct blkif_request_segment) {
+					.gref       = ref,
+					.first_sect = fsect,
+					.last_sect  = lsect };
+
+			ring_req->nr_segments++;
+		}
+	}
+
+	info->ring.req_prod_pvt++;
+
+	/* Keep a private copy so we can reissue requests when recovering. */
+	info->shadow[id].req = *ring_req;
+
+	gnttab_free_grant_references(gref_head);
+
+	return 0;
+}
+
+
+static inline void flush_requests(struct blkfront_info *info)
+{
+	int notify;
+
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&info->ring, notify);
+
+	if (notify)
+		notify_remote_via_irq(info->irq);
+}
+
+/*
+ * do_blkif_request
+ *  read a block; request is in a request queue
+ */
+static void do_blkif_request(request_queue_t *rq)
+{
+	struct blkfront_info *info = NULL;
+	struct request *req;
+	int queued;
+
+	pr_debug("Entered do_blkif_request\n");
+
+	queued = 0;
+
+	while ((req = elv_next_request(rq)) != NULL) {
+		info = req->rq_disk->private_data;
+		if (!blk_fs_request(req)) {
+			end_request(req, 0);
+			continue;
+		}
+
+		if (RING_FULL(&info->ring))
+			goto wait;
+
+		pr_debug("do_blk_req %p: cmd %p, sec %lx, "
+			 "(%u/%li) buffer:%p [%s]\n",
+			 req, req->cmd, (unsigned long)req->sector,
+			 req->current_nr_sectors,
+			 req->nr_sectors, req->buffer,
+			 rq_data_dir(req) ? "write" : "read");
+
+
+		blkdev_dequeue_request(req);
+		if (blkif_queue_request(req)) {
+			blk_requeue_request(rq, req);
+wait:
+			/* Avoid pointless unplugs. */
+			blk_stop_queue(rq);
+			break;
+		}
+
+		queued++;
+	}
+
+	if (queued != 0)
+		flush_requests(info);
+}
+
+static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
+{
+	request_queue_t *rq;
+
+	rq = blk_init_queue(do_blkif_request, &blkif_io_lock);
+	if (rq == NULL)
+		return -1;
+
+	elevator_init(rq, "noop");
+
+	/* Hard sector size and max sectors impersonate the equiv. hardware. */
+	blk_queue_hardsect_size(rq, sector_size);
+	blk_queue_max_sectors(rq, 512);
+
+	/* Each segment in a request is up to an aligned page in size. */
+	blk_queue_segment_boundary(rq, PAGE_SIZE - 1);
+	blk_queue_max_segment_size(rq, PAGE_SIZE);
+
+	/* Ensure a merged request will fit in a single I/O ring slot. */
+	blk_queue_max_phys_segments(rq, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+	blk_queue_max_hw_segments(rq, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
+	/* Make sure buffer addresses are sector-aligned. */
+	blk_queue_dma_alignment(rq, 511);
+
+	gd->queue = rq;
+
+	return 0;
+}
+
+
+static int xlvbd_barrier(struct blkfront_info *info)
+{
+	int err;
+
+	err = blk_queue_ordered(info->rq,
+				info->feature_barrier ? QUEUE_ORDERED_DRAIN : QUEUE_ORDERED_NONE,
+				NULL);
+
+	if (err)
+		return err;
+
+	printk(KERN_INFO "blkfront: %s: barriers %s\n",
+	       info->gd->disk_name,
+	       info->feature_barrier ? "enabled" : "disabled");
+	return 0;
+}
+
+
+static int xlvbd_alloc_gendisk(int minor, blkif_sector_t capacity,
+			       int vdevice, u16 vdisk_info, u16 sector_size,
+			       struct blkfront_info *info)
+{
+	struct gendisk *gd;
+	int nr_minors = 1;
+	int err = -ENODEV;
+
+	BUG_ON(info->gd != NULL);
+	BUG_ON(info->rq != NULL);
+
+	if ((minor % PARTS_PER_DISK) == 0)
+		nr_minors = PARTS_PER_DISK;
+
+	gd = alloc_disk(nr_minors);
+	if (gd == NULL)
+		goto out;
+
+	if (nr_minors > 1)
+		sprintf(gd->disk_name, "%s%c", DEV_NAME,
+			'a' + minor / PARTS_PER_DISK);
+	else
+		sprintf(gd->disk_name, "%s%c%d", DEV_NAME,
+			'a' + minor / PARTS_PER_DISK,
+			minor % PARTS_PER_DISK);
+
+	gd->major = XENVBD_MAJOR;
+	gd->first_minor = minor;
+	gd->fops = &xlvbd_block_fops;
+	gd->private_data = info;
+	gd->driverfs_dev = &(info->xbdev->dev);
+	set_capacity(gd, capacity);
+
+	if (xlvbd_init_blk_queue(gd, sector_size)) {
+		del_gendisk(gd);
+		goto out;
+	}
+
+	info->rq = gd->queue;
+	info->gd = gd;
+
+	if (info->feature_barrier)
+		xlvbd_barrier(info);
+
+	if (vdisk_info & VDISK_READONLY)
+		set_disk_ro(gd, 1);
+
+	if (vdisk_info & VDISK_REMOVABLE)
+		gd->flags |= GENHD_FL_REMOVABLE;
+
+	if (vdisk_info & VDISK_CDROM)
+		gd->flags |= GENHD_FL_CD;
+
+	return 0;
+
+ out:
+	return err;
+}
+
+static void kick_pending_request_queues(struct blkfront_info *info)
+{
+	if (!RING_FULL(&info->ring)) {
+		/* Re-enable calldowns. */
+		blk_start_queue(info->rq);
+		/* Kick things off immediately. */
+		do_blkif_request(info->rq);
+	}
+}
+
+static void blkif_restart_queue(struct work_struct *work)
+{
+	struct blkfront_info *info = container_of(work, struct blkfront_info, work);
+
+	spin_lock_irq(&blkif_io_lock);
+	if (info->connected == BLKIF_STATE_CONNECTED)
+		kick_pending_request_queues(info);
+	spin_unlock_irq(&blkif_io_lock);
+}
+
+static void blkif_free(struct blkfront_info *info, int suspend)
+{
+	/* Prevent new requests being issued until we fix things up. */
+	spin_lock_irq(&blkif_io_lock);
+	info->connected = suspend ?
+		BLKIF_STATE_SUSPENDED : BLKIF_STATE_DISCONNECTED;
+	/* No more blkif_request(). */
+	if (info->rq)
+		blk_stop_queue(info->rq);
+	/* No more gnttab callback work. */
+	gnttab_cancel_free_callback(&info->callback);
+	spin_unlock_irq(&blkif_io_lock);
+
+	/* Flush gnttab callback work. Must be done with no locks held. */
+	flush_scheduled_work();
+
+	/* Free resources associated with old device channel. */
+	if (info->ring_ref != GRANT_INVALID_REF) {
+		gnttab_end_foreign_access(info->ring_ref, 0,
+					  (unsigned long)info->ring.sring);
+		info->ring_ref = GRANT_INVALID_REF;
+		info->ring.sring = NULL;
+	}
+	if (info->irq)
+		unbind_from_irqhandler(info->irq, info);
+	info->evtchn = info->irq = 0;
+
+}
+
+static void blkif_completion(struct blk_shadow *s)
+{
+	int i;
+	for (i = 0; i < s->req.nr_segments; i++)
+		gnttab_end_foreign_access(s->req.seg[i].gref, 0, 0UL);
+}
+
+static irqreturn_t blkif_interrupt(int irq, void *dev_id)
+{
+	struct request *req;
+	struct blkif_response *bret;
+	RING_IDX i, rp;
+	unsigned long flags;
+	struct blkfront_info *info = (struct blkfront_info *)dev_id;
+	int uptodate;
+
+	spin_lock_irqsave(&blkif_io_lock, flags);
+
+	if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) {
+		spin_unlock_irqrestore(&blkif_io_lock, flags);
+		return IRQ_HANDLED;
+	}
+
+ again:
+	rp = info->ring.sring->rsp_prod;
+	rmb(); /* Ensure we see queued responses up to 'rp'. */
+
+	for (i = info->ring.rsp_cons; i != rp; i++) {
+		unsigned long id;
+		int ret;
+
+		bret = RING_GET_RESPONSE(&info->ring, i);
+		id   = bret->id;
+		req  = (struct request *)info->shadow[id].request;
+
+		blkif_completion(&info->shadow[id]);
+
+		add_id_to_freelist(info, id);
+
+		uptodate = (bret->status == BLKIF_RSP_OKAY);
+		switch (bret->operation) {
+		case BLKIF_OP_WRITE_BARRIER:
+			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+				printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
+				       info->gd->disk_name);
+				uptodate = -EOPNOTSUPP;
+				info->feature_barrier = 0;
+				xlvbd_barrier(info);
+			}
+			/* fall through */
+		case BLKIF_OP_READ:
+		case BLKIF_OP_WRITE:
+			if (unlikely(bret->status != BLKIF_RSP_OKAY))
+				dev_dbg(&info->xbdev->dev, "Bad return from blkdev data "
+					"request: %x\n", bret->status);
+
+			ret = end_that_request_first(req, uptodate,
+				req->hard_nr_sectors);
+			BUG_ON(ret);
+			end_that_request_last(req, uptodate);
+			break;
+		default:
+			BUG();
+		}
+	}
+
+	info->ring.rsp_cons = i;
+
+	if (i != info->ring.req_prod_pvt) {
+		int more_to_do;
+		RING_FINAL_CHECK_FOR_RESPONSES(&info->ring, more_to_do);
+		if (more_to_do)
+			goto again;
+	} else
+		info->ring.sring->rsp_event = i + 1;
+
+	kick_pending_request_queues(info);
+
+	spin_unlock_irqrestore(&blkif_io_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+
+static int setup_blkring(struct xenbus_device *dev,
+			 struct blkfront_info *info)
+{
+	struct blkif_sring *sring;
+	int err;
+
+	info->ring_ref = GRANT_INVALID_REF;
+
+	sring = (struct blkif_sring *)__get_free_page(GFP_KERNEL);
+	if (!sring) {
+		xenbus_dev_fatal(dev, -ENOMEM, "allocating shared ring");
+		return -ENOMEM;
+	}
+	SHARED_RING_INIT(sring);
+	FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
+
+	err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
+	if (err < 0) {
+		free_page((unsigned long)sring);
+		info->ring.sring = NULL;
+		goto fail;
+	}
+	info->ring_ref = err;
+
+	err = xenbus_alloc_evtchn(dev, &info->evtchn);
+	if (err)
+		goto fail;
+
+	err = bind_evtchn_to_irqhandler(info->evtchn,
+					blkif_interrupt,
+					IRQF_SAMPLE_RANDOM, "blkif", info);
+	if (err <= 0) {
+		xenbus_dev_fatal(dev, err,
+				 "bind_evtchn_to_irqhandler failed");
+		goto fail;
+	}
+	info->irq = err;
+
+	return 0;
+fail:
+	blkif_free(info, 0);
+	return err;
+}
+
+
+/* Common code used when first setting up, and when resuming. */
+static int talk_to_backend(struct xenbus_device *dev,
+			   struct blkfront_info *info)
+{
+	const char *message = NULL;
+	struct xenbus_transaction xbt;
+	int err;
+
+	/* Create shared ring, alloc event channel. */
+	err = setup_blkring(dev, info);
+	if (err)
+		goto out;
+
+again:
+	err = xenbus_transaction_start(&xbt);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "starting transaction");
+		goto destroy_blkring;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename,
+			    "ring-ref", "%u", info->ring_ref);
+	if (err) {
+		message = "writing ring-ref";
+		goto abort_transaction;
+	}
+	err = xenbus_printf(xbt, dev->nodename,
+			    "event-channel", "%u", info->evtchn);
+	if (err) {
+		message = "writing event-channel";
+		goto abort_transaction;
+	}
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err) {
+		if (err == -EAGAIN)
+			goto again;
+		xenbus_dev_fatal(dev, err, "completing transaction");
+		goto destroy_blkring;
+	}
+
+	xenbus_switch_state(dev, XenbusStateInitialised);
+
+	return 0;
+
+ abort_transaction:
+	xenbus_transaction_end(xbt, 1);
+	if (message)
+		xenbus_dev_fatal(dev, err, "%s", message);
+ destroy_blkring:
+	blkif_free(info, 0);
+ out:
+	return err;
+}
+
+
+/**
+ * Entry point to this code when a new device is created.  Allocate the basic
+ * structures and the ring buffer for communication with the backend, and
+ * inform the backend of the appropriate details for those.  Switch to
+ * Initialised state.
+ */
+static int blkfront_probe(struct xenbus_device *dev,
+			  const struct xenbus_device_id *id)
+{
+	int err, vdevice, i;
+	struct blkfront_info *info;
+
+	/* FIXME: Use dynamic device id if this is not set. */
+	err = xenbus_scanf(XBT_NIL, dev->nodename,
+			   "virtual-device", "%i", &vdevice);
+	if (err != 1) {
+		xenbus_dev_fatal(dev, err, "reading virtual-device");
+		return err;
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure");
+		return -ENOMEM;
+	}
+
+	info->xbdev = dev;
+	info->vdevice = vdevice;
+	info->connected = BLKIF_STATE_DISCONNECTED;
+	INIT_WORK(&info->work, blkif_restart_queue);
+
+	for (i = 0; i < BLK_RING_SIZE; i++)
+		info->shadow[i].req.id = i+1;
+	info->shadow[BLK_RING_SIZE-1].req.id = 0x0fffffff;
+
+	/* Front end dir is a number, which is used as the id. */
+	info->handle = simple_strtoul(strrchr(dev->nodename, '/')+1, NULL, 0);
+	dev->dev.driver_data = info;
+
+	err = talk_to_backend(dev, info);
+	if (err) {
+		kfree(info);
+		dev->dev.driver_data = NULL;
+		return err;
+	}
+
+	return 0;
+}
+
+
+static int blkif_recover(struct blkfront_info *info)
+{
+	int i;
+	struct blkif_request *req;
+	struct blk_shadow *copy;
+	int j;
+
+	/* Stage 1: Make a safe copy of the shadow state. */
+	copy = kmalloc(sizeof(info->shadow), GFP_KERNEL);
+	if (!copy)
+		return -ENOMEM;
+	memcpy(copy, info->shadow, sizeof(info->shadow));
+
+	/* Stage 2: Set up free list. */
+	memset(&info->shadow, 0, sizeof(info->shadow));
+	for (i = 0; i < BLK_RING_SIZE; i++)
+		info->shadow[i].req.id = i+1;
+	info->shadow_free = info->ring.req_prod_pvt;
+	info->shadow[BLK_RING_SIZE-1].req.id = 0x0fffffff;
+
+	/* Stage 3: Find pending requests and requeue them. */
+	for (i = 0; i < BLK_RING_SIZE; i++) {
+		/* Not in use? */
+		if (copy[i].request == 0)
+			continue;
+
+		/* Grab a request slot and copy shadow state into it. */
+		req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt);
+		*req = copy[i].req;
+
+		/* We get a new request id, and must reset the shadow state. */
+		req->id = get_id_from_freelist(info);
+		memcpy(&info->shadow[req->id], &copy[i], sizeof(copy[i]));
+
+		/* Rewrite any grant references invalidated by susp/resume. */
+		for (j = 0; j < req->nr_segments; j++)
+			gnttab_grant_foreign_access_ref(
+				req->seg[j].gref,
+				info->xbdev->otherend_id,
+				pfn_to_mfn(info->shadow[req->id].frame[j]),
+				rq_data_dir(
+					(struct request *)
+					info->shadow[req->id].request));
+		info->shadow[req->id].req = *req;
+
+		info->ring.req_prod_pvt++;
+	}
+
+	kfree(copy);
+
+	xenbus_switch_state(info->xbdev, XenbusStateConnected);
+
+	spin_lock_irq(&blkif_io_lock);
+
+	/* Now safe for us to use the shared ring */
+	info->connected = BLKIF_STATE_CONNECTED;
+
+	/* Send off requeued requests */
+	flush_requests(info);
+
+	/* Kick any other new requests queued since we resumed */
+	kick_pending_request_queues(info);
+
+	spin_unlock_irq(&blkif_io_lock);
+
+	return 0;
+}
+
+/**
+ * We are reconnecting to the backend, due to a suspend/resume, or a backend
+ * driver restart.  We tear down our blkif structure and recreate it, but
+ * leave the device-layer structures intact so that this is transparent to the
+ * rest of the kernel.
+ */
+static int blkfront_resume(struct xenbus_device *dev)
+{
+	struct blkfront_info *info = dev->dev.driver_data;
+	int err;
+
+	dev_dbg(&dev->dev, "blkfront_resume: %s\n", dev->nodename);
+
+	blkif_free(info, info->connected == BLKIF_STATE_CONNECTED);
+
+	err = talk_to_backend(dev, info);
+	if (info->connected == BLKIF_STATE_SUSPENDED && !err)
+		err = blkif_recover(info);
+
+	return err;
+}
+
+
+/*
+ * Invoked when the backend is finally 'ready' (and has told produced
+ * the details about the physical device - #sectors, size, etc).
+ */
+static void blkfront_connect(struct blkfront_info *info)
+{
+	unsigned long long sectors;
+	unsigned long sector_size;
+	unsigned int binfo;
+	int err;
+
+	if ((info->connected == BLKIF_STATE_CONNECTED) ||
+	    (info->connected == BLKIF_STATE_SUSPENDED) )
+		return;
+
+	dev_dbg(&info->xbdev->dev, "%s:%s.\n",
+		__func__, info->xbdev->otherend);
+
+	err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
+			    "sectors", "%llu", &sectors,
+			    "info", "%u", &binfo,
+			    "sector-size", "%lu", &sector_size,
+			    NULL);
+	if (err) {
+		xenbus_dev_fatal(info->xbdev, err,
+				 "reading backend fields at %s",
+				 info->xbdev->otherend);
+		return;
+	}
+
+	err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
+			    "feature-barrier", "%lu", &info->feature_barrier,
+			    NULL);
+	if (err)
+		info->feature_barrier = 0;
+
+	err = xlvbd_alloc_gendisk(BLKIF_MINOR(info->vdevice),
+				  sectors, info->vdevice,
+				  binfo, sector_size, info);
+	if (err) {
+		xenbus_dev_fatal(info->xbdev, err, "xlvbd_add at %s",
+				 info->xbdev->otherend);
+		return;
+	}
+
+	xenbus_switch_state(info->xbdev, XenbusStateConnected);
+
+	/* Kick pending requests. */
+	spin_lock_irq(&blkif_io_lock);
+	info->connected = BLKIF_STATE_CONNECTED;
+	kick_pending_request_queues(info);
+	spin_unlock_irq(&blkif_io_lock);
+
+	add_disk(info->gd);
+}
+
+/**
+ * Handle the change of state of the backend to Closing.  We must delete our
+ * device-layer structures now, to ensure that writes are flushed through to
+ * the backend.  Once is this done, we can switch to Closed in
+ * acknowledgement.
+ */
+static void blkfront_closing(struct xenbus_device *dev)
+{
+	struct blkfront_info *info = dev->dev.driver_data;
+	unsigned long flags;
+
+	dev_dbg(&dev->dev, "blkfront_closing: %s removed\n", dev->nodename);
+
+	if (info->rq == NULL)
+		goto out;
+
+	spin_lock_irqsave(&blkif_io_lock, flags);
+
+	del_gendisk(info->gd);
+
+	/* No more blkif_request(). */
+	blk_stop_queue(info->rq);
+
+	/* No more gnttab callback work. */
+	gnttab_cancel_free_callback(&info->callback);
+	spin_unlock_irqrestore(&blkif_io_lock, flags);
+
+	/* Flush gnttab callback work. Must be done with no locks held. */
+	flush_scheduled_work();
+
+	blk_cleanup_queue(info->rq);
+	info->rq = NULL;
+
+ out:
+	xenbus_frontend_closed(dev);
+}
+
+/**
+ * Callback received when the backend's state changes.
+ */
+static void backend_changed(struct xenbus_device *dev,
+			    enum xenbus_state backend_state)
+{
+	struct blkfront_info *info = dev->dev.driver_data;
+	struct block_device *bd;
+
+	dev_dbg(&dev->dev, "blkfront:backend_changed.\n");
+
+	switch (backend_state) {
+	case XenbusStateInitialising:
+	case XenbusStateInitWait:
+	case XenbusStateInitialised:
+	case XenbusStateUnknown:
+	case XenbusStateClosed:
+		break;
+
+	case XenbusStateConnected:
+		blkfront_connect(info);
+		break;
+
+	case XenbusStateClosing:
+		bd = bdget(info->dev);
+		if (bd == NULL)
+			xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
+
+		mutex_lock(&bd->bd_mutex);
+		if (info->users > 0)
+			xenbus_dev_error(dev, -EBUSY,
+					 "Device in use; refusing to close");
+		else
+			blkfront_closing(dev);
+		mutex_unlock(&bd->bd_mutex);
+		bdput(bd);
+		break;
+	}
+}
+
+static int blkfront_remove(struct xenbus_device *dev)
+{
+	struct blkfront_info *info = dev->dev.driver_data;
+
+	dev_dbg(&dev->dev, "blkfront_remove: %s removed\n", dev->nodename);
+
+	blkif_free(info, 0);
+
+	kfree(info);
+
+	return 0;
+}
+
+static int blkif_open(struct inode *inode, struct file *filep)
+{
+	struct blkfront_info *info = inode->i_bdev->bd_disk->private_data;
+	info->users++;
+	return 0;
+}
+
+static int blkif_release(struct inode *inode, struct file *filep)
+{
+	struct blkfront_info *info = inode->i_bdev->bd_disk->private_data;
+	info->users--;
+	if (info->users == 0) {
+		/* Check whether we have been instructed to close.  We will
+		   have ignored this request initially, as the device was
+		   still mounted. */
+		struct xenbus_device *dev = info->xbdev;
+		enum xenbus_state state = xenbus_read_driver_state(dev->otherend);
+
+		if (state == XenbusStateClosing)
+			blkfront_closing(dev);
+	}
+	return 0;
+}
+
+static struct block_device_operations xlvbd_block_fops =
+{
+	.owner = THIS_MODULE,
+	.open = blkif_open,
+	.release = blkif_release,
+};
+
+
+static struct xenbus_device_id blkfront_ids[] = {
+	{ "vbd" },
+	{ "" }
+};
+
+static struct xenbus_driver blkfront = {
+	.name = "vbd",
+	.owner = THIS_MODULE,
+	.ids = blkfront_ids,
+	.probe = blkfront_probe,
+	.remove = blkfront_remove,
+	.resume = blkfront_resume,
+	.otherend_changed = backend_changed,
+};
+
+static int __init xlblk_init(void)
+{
+	if (!is_running_on_xen())
+		return -ENODEV;
+
+	if (register_blkdev(XENVBD_MAJOR, DEV_NAME)) {
+		printk(KERN_WARNING "xen_blk: can't get major %d with name %s\n",
+		       XENVBD_MAJOR, DEV_NAME);
+		return -ENODEV;
+	}
+
+	return xenbus_register_frontend(&blkfront);
+}
+module_init(xlblk_init);
+
+
+static void xlblk_exit(void)
+{
+	return xenbus_unregister_driver(&blkfront);
+}
+module_exit(xlblk_exit);
+
+MODULE_DESCRIPTION("Xen virtual block device frontend");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_BLOCKDEV_MAJOR(XENVBD_MAJOR);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d8d7125..9e8f214 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -372,39 +372,6 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called istallion.
 
-config SERIAL_DEC
-	bool "DECstation serial support"
-	depends on MACH_DECSTATION
-	default y
-	help
-	  This selects whether you want to be asked about drivers for
-	  DECstation serial ports.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about DECstation serial ports.
-
-config SERIAL_DEC_CONSOLE
-	bool "Support for console on a DECstation serial port"
-	depends on SERIAL_DEC
-	default y
-	help
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode).  Note that the firmware uses ttyS0 as the serial console on
-	  the Maxine and ttyS2 on the others.
-
-	  If unsure, say Y.
-
-config ZS
-	bool "Z85C30 Serial Support"
-	depends on SERIAL_DEC
-	default y
-	help
-	  Documentation on the Zilog 85C350 serial communications controller
-	  is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>
-
 config A2232
 	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
@@ -637,6 +604,14 @@
 	help
 	  Toshiba's Cell Reference Set Beat Console device driver
 
+config HVC_XEN
+	bool "Xen Hypervisor Console support"
+	depends on XEN
+	select HVC_DRIVER
+	default y
+	help
+	  Xen virtual console device driver
+
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
 	depends on PPC_PSERIES
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index f2996a9..8852b8d 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -48,6 +48,7 @@
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
 obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
+obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o
diff --git a/drivers/char/decserial.c b/drivers/char/decserial.c
deleted file mode 100644
index 8ea2bea..0000000
--- a/drivers/char/decserial.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * sercons.c
- *      choose the right serial device at boot time
- *
- * triemer 6-SEP-1998
- *      sercons.c is designed to allow the three different kinds 
- *      of serial devices under the decstation world to co-exist
- *      in the same kernel.  The idea here is to abstract 
- *      the pieces of the drivers that are common to this file
- *      so that they do not clash at compile time and runtime.
- *
- * HK 16-SEP-1998 v0.002
- *      removed the PROM console as this is not a real serial
- *      device. Added support for PROM console in drivers/char/tty_io.c
- *      instead. Although it may work to enable more than one 
- *      console device I strongly recommend to use only one.
- */
-
-#include <linux/init.h>
-#include <asm/dec/machtype.h>
-
-#ifdef CONFIG_ZS
-extern int zs_init(void);
-#endif
-
-#ifdef CONFIG_SERIAL_CONSOLE
-
-#ifdef CONFIG_ZS
-extern void zs_serial_console_init(void);
-#endif
-
-#endif
-
-/* rs_init - starts up the serial interface -
-   handle normal case of starting up the serial interface */
-
-#ifdef CONFIG_SERIAL
-
-int __init rs_init(void)
-{
-#ifdef CONFIG_ZS
-    if (IOASIC)
-	return zs_init();
-#endif
-    return -ENXIO;
-}
-
-__initcall(rs_init);
-
-#endif
-
-#ifdef CONFIG_SERIAL_CONSOLE
-
-/* serial_console_init handles the special case of starting
- *   up the console on the serial port
- */
-static int __init decserial_console_init(void)
-{
-#ifdef CONFIG_ZS
-    if (IOASIC)
-	zs_serial_console_init();
-#endif
-    return 0;
-}
-console_initcall(decserial_console_init);
-
-#endif
diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c
new file mode 100644
index 0000000..dd68f85
--- /dev/null
+++ b/drivers/char/hvc_xen.c
@@ -0,0 +1,159 @@
+/*
+ * xen console driver interface to hvc_console.c
+ *
+ * (c) 2007 Gerd Hoffmann <kraxel@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/types.h>
+
+#include <asm/xen/hypervisor.h>
+#include <xen/page.h>
+#include <xen/events.h>
+#include <xen/interface/io/console.h>
+#include <xen/hvc-console.h>
+
+#include "hvc_console.h"
+
+#define HVC_COOKIE   0x58656e /* "Xen" in hex */
+
+static struct hvc_struct *hvc;
+static int xencons_irq;
+
+/* ------------------------------------------------------------------ */
+
+static inline struct xencons_interface *xencons_interface(void)
+{
+	return mfn_to_virt(xen_start_info->console.domU.mfn);
+}
+
+static inline void notify_daemon(void)
+{
+	/* Use evtchn: this is called early, before irq is set up. */
+	notify_remote_via_evtchn(xen_start_info->console.domU.evtchn);
+}
+
+static int write_console(uint32_t vtermno, const char *data, int len)
+{
+	struct xencons_interface *intf = xencons_interface();
+	XENCONS_RING_IDX cons, prod;
+	int sent = 0;
+
+	cons = intf->out_cons;
+	prod = intf->out_prod;
+	mb();			/* update queue values before going on */
+	BUG_ON((prod - cons) > sizeof(intf->out));
+
+	while ((sent < len) && ((prod - cons) < sizeof(intf->out)))
+		intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++];
+
+	wmb();			/* write ring before updating pointer */
+	intf->out_prod = prod;
+
+	notify_daemon();
+	return sent;
+}
+
+static int read_console(uint32_t vtermno, char *buf, int len)
+{
+	struct xencons_interface *intf = xencons_interface();
+	XENCONS_RING_IDX cons, prod;
+	int recv = 0;
+
+	cons = intf->in_cons;
+	prod = intf->in_prod;
+	mb();			/* get pointers before reading ring */
+	BUG_ON((prod - cons) > sizeof(intf->in));
+
+	while (cons != prod && recv < len)
+		buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)];
+
+	mb();			/* read ring before consuming */
+	intf->in_cons = cons;
+
+	notify_daemon();
+	return recv;
+}
+
+static struct hv_ops hvc_ops = {
+	.get_chars = read_console,
+	.put_chars = write_console,
+};
+
+static int __init xen_init(void)
+{
+	struct hvc_struct *hp;
+
+	if (!is_running_on_xen())
+		return 0;
+
+	xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn);
+	if (xencons_irq < 0)
+		xencons_irq = 0 /* NO_IRQ */;
+	hp = hvc_alloc(HVC_COOKIE, xencons_irq, &hvc_ops, 256);
+	if (IS_ERR(hp))
+		return PTR_ERR(hp);
+
+	hvc = hp;
+	return 0;
+}
+
+static void __exit xen_fini(void)
+{
+	if (hvc)
+		hvc_remove(hvc);
+}
+
+static int xen_cons_init(void)
+{
+	if (!is_running_on_xen())
+		return 0;
+
+	hvc_instantiate(HVC_COOKIE, 0, &hvc_ops);
+	return 0;
+}
+
+module_init(xen_init);
+module_exit(xen_fini);
+console_initcall(xen_cons_init);
+
+static void xenboot_write_console(struct console *console, const char *string,
+				  unsigned len)
+{
+	unsigned int linelen, off = 0;
+	const char *pos;
+
+	while (off < len && NULL != (pos = strchr(string+off, '\n'))) {
+		linelen = pos-string+off;
+		if (off + linelen > len)
+			break;
+		write_console(0, string+off, linelen);
+		write_console(0, "\r\n", 2);
+		off += linelen + 1;
+	}
+	if (off < len)
+		write_console(0, string+off, len-off);
+}
+
+struct console xenboot_console = {
+	.name		= "xenboot",
+	.write		= xenboot_write_console,
+	.flags		= CON_PRINTBUFFER | CON_BOOT,
+};
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index dbb2240..3d90fc0 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -1770,7 +1770,8 @@
 				"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
 				NULL };
 
-	return call_usermodehelper(critical_overtemp_path, argv, envp, 0);
+	return call_usermodehelper(critical_overtemp_path,
+				   argv, envp, UMH_WAIT_EXEC);
 }
 
 
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index e18d265..516d943 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -80,7 +80,8 @@
 				"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
 				NULL };
 
-	return call_usermodehelper(critical_overtemp_path, argv, envp, 0);
+	return call_usermodehelper(critical_overtemp_path,
+				   argv, envp, UMH_WAIT_EXEC);
 }
 EXPORT_SYMBOL_GPL(wf_critical_overtemp);
 
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index 3d65917..8fe81e1 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -623,6 +623,7 @@
 
 	ps->metadata_wq = create_singlethread_workqueue("ksnaphd");
 	if (!ps->metadata_wq) {
+		kfree(ps);
 		DMERR("couldn't start header metadata update thread");
 		return -ENOMEM;
 	}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 43d0317..5fb659f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2486,6 +2486,18 @@
 
 source "drivers/s390/net/Kconfig"
 
+config XEN_NETDEV_FRONTEND
+	tristate "Xen network device frontend driver"
+	depends on XEN
+	default y
+	help
+	  The network device frontend driver allows the kernel to
+	  access network devices exported exported by a virtual
+	  machine containing a physical network device driver. The
+	  frontend driver is intended for unprivileged guest domains;
+	  if you are compiling a kernel for a Xen guest, you almost
+	  certainly want to enable this.
+
 config ISERIES_VETH
 	tristate "iSeries Virtual Ethernet driver support"
 	depends on PPC_ISERIES
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index eb41676..0e286ab 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -127,6 +127,8 @@
 obj-$(CONFIG_SLIP) += slip.o
 obj-$(CONFIG_SLHC) += slhc.o
 
+obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+
 obj-$(CONFIG_DUMMY) += dummy.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 84aa211..355c6cf 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -320,7 +320,7 @@
 	sprintf(portarg, "%ld", bc->pdev->port->base);
 	printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
 
-	return call_usermodehelper(eppconfig_path, argv, envp, 1);
+	return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC);
 }
 
 /* ---------------------------------------------------------------------- */
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
new file mode 100644
index 0000000..489f69c
--- /dev/null
+++ b/drivers/net/xen-netfront.c
@@ -0,0 +1,1863 @@
+/*
+ * Virtual network driver for conversing with remote driver backends.
+ *
+ * Copyright (c) 2002-2005, K A Fraser
+ * Copyright (c) 2005, XenSource Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/moduleparam.h>
+#include <linux/mm.h>
+#include <net/ip.h>
+
+#include <xen/xenbus.h>
+#include <xen/events.h>
+#include <xen/page.h>
+#include <xen/grant_table.h>
+
+#include <xen/interface/io/netif.h>
+#include <xen/interface/memory.h>
+#include <xen/interface/grant_table.h>
+
+static struct ethtool_ops xennet_ethtool_ops;
+
+struct netfront_cb {
+	struct page *page;
+	unsigned offset;
+};
+
+#define NETFRONT_SKB_CB(skb)	((struct netfront_cb *)((skb)->cb))
+
+#define RX_COPY_THRESHOLD 256
+
+#define GRANT_INVALID_REF	0
+
+#define NET_TX_RING_SIZE __RING_SIZE((struct xen_netif_tx_sring *)0, PAGE_SIZE)
+#define NET_RX_RING_SIZE __RING_SIZE((struct xen_netif_rx_sring *)0, PAGE_SIZE)
+#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
+
+struct netfront_info {
+	struct list_head list;
+	struct net_device *netdev;
+
+	struct net_device_stats stats;
+
+	struct xen_netif_tx_front_ring tx;
+	struct xen_netif_rx_front_ring rx;
+
+	spinlock_t   tx_lock;
+	spinlock_t   rx_lock;
+
+	unsigned int evtchn;
+
+	/* Receive-ring batched refills. */
+#define RX_MIN_TARGET 8
+#define RX_DFL_MIN_TARGET 64
+#define RX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
+	unsigned rx_min_target, rx_max_target, rx_target;
+	struct sk_buff_head rx_batch;
+
+	struct timer_list rx_refill_timer;
+
+	/*
+	 * {tx,rx}_skbs store outstanding skbuffs. Free tx_skb entries
+	 * are linked from tx_skb_freelist through skb_entry.link.
+	 *
+	 *  NB. Freelist index entries are always going to be less than
+	 *  PAGE_OFFSET, whereas pointers to skbs will always be equal or
+	 *  greater than PAGE_OFFSET: we use this property to distinguish
+	 *  them.
+	 */
+	union skb_entry {
+		struct sk_buff *skb;
+		unsigned link;
+	} tx_skbs[NET_TX_RING_SIZE];
+	grant_ref_t gref_tx_head;
+	grant_ref_t grant_tx_ref[NET_TX_RING_SIZE];
+	unsigned tx_skb_freelist;
+
+	struct sk_buff *rx_skbs[NET_RX_RING_SIZE];
+	grant_ref_t gref_rx_head;
+	grant_ref_t grant_rx_ref[NET_RX_RING_SIZE];
+
+	struct xenbus_device *xbdev;
+	int tx_ring_ref;
+	int rx_ring_ref;
+
+	unsigned long rx_pfn_array[NET_RX_RING_SIZE];
+	struct multicall_entry rx_mcl[NET_RX_RING_SIZE+1];
+	struct mmu_update rx_mmu[NET_RX_RING_SIZE];
+};
+
+struct netfront_rx_info {
+	struct xen_netif_rx_response rx;
+	struct xen_netif_extra_info extras[XEN_NETIF_EXTRA_TYPE_MAX - 1];
+};
+
+/*
+ * Access macros for acquiring freeing slots in tx_skbs[].
+ */
+
+static void add_id_to_freelist(unsigned *head, union skb_entry *list,
+			       unsigned short id)
+{
+	list[id].link = *head;
+	*head = id;
+}
+
+static unsigned short get_id_from_freelist(unsigned *head,
+					   union skb_entry *list)
+{
+	unsigned int id = *head;
+	*head = list[id].link;
+	return id;
+}
+
+static int xennet_rxidx(RING_IDX idx)
+{
+	return idx & (NET_RX_RING_SIZE - 1);
+}
+
+static struct sk_buff *xennet_get_rx_skb(struct netfront_info *np,
+					 RING_IDX ri)
+{
+	int i = xennet_rxidx(ri);
+	struct sk_buff *skb = np->rx_skbs[i];
+	np->rx_skbs[i] = NULL;
+	return skb;
+}
+
+static grant_ref_t xennet_get_rx_ref(struct netfront_info *np,
+					    RING_IDX ri)
+{
+	int i = xennet_rxidx(ri);
+	grant_ref_t ref = np->grant_rx_ref[i];
+	np->grant_rx_ref[i] = GRANT_INVALID_REF;
+	return ref;
+}
+
+#ifdef CONFIG_SYSFS
+static int xennet_sysfs_addif(struct net_device *netdev);
+static void xennet_sysfs_delif(struct net_device *netdev);
+#else /* !CONFIG_SYSFS */
+#define xennet_sysfs_addif(dev) (0)
+#define xennet_sysfs_delif(dev) do { } while (0)
+#endif
+
+static int xennet_can_sg(struct net_device *dev)
+{
+	return dev->features & NETIF_F_SG;
+}
+
+
+static void rx_refill_timeout(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	netif_rx_schedule(dev);
+}
+
+static int netfront_tx_slot_available(struct netfront_info *np)
+{
+	return ((np->tx.req_prod_pvt - np->tx.rsp_cons) <
+		(TX_MAX_TARGET - MAX_SKB_FRAGS - 2));
+}
+
+static void xennet_maybe_wake_tx(struct net_device *dev)
+{
+	struct netfront_info *np = netdev_priv(dev);
+
+	if (unlikely(netif_queue_stopped(dev)) &&
+	    netfront_tx_slot_available(np) &&
+	    likely(netif_running(dev)))
+		netif_wake_queue(dev);
+}
+
+static void xennet_alloc_rx_buffers(struct net_device *dev)
+{
+	unsigned short id;
+	struct netfront_info *np = netdev_priv(dev);
+	struct sk_buff *skb;
+	struct page *page;
+	int i, batch_target, notify;
+	RING_IDX req_prod = np->rx.req_prod_pvt;
+	struct xen_memory_reservation reservation;
+	grant_ref_t ref;
+	unsigned long pfn;
+	void *vaddr;
+	int nr_flips;
+	struct xen_netif_rx_request *req;
+
+	if (unlikely(!netif_carrier_ok(dev)))
+		return;
+
+	/*
+	 * Allocate skbuffs greedily, even though we batch updates to the
+	 * receive ring. This creates a less bursty demand on the memory
+	 * allocator, so should reduce the chance of failed allocation requests
+	 * both for ourself and for other kernel subsystems.
+	 */
+	batch_target = np->rx_target - (req_prod - np->rx.rsp_cons);
+	for (i = skb_queue_len(&np->rx_batch); i < batch_target; i++) {
+		skb = __netdev_alloc_skb(dev, RX_COPY_THRESHOLD,
+					 GFP_ATOMIC | __GFP_NOWARN);
+		if (unlikely(!skb))
+			goto no_skb;
+
+		page = alloc_page(GFP_ATOMIC | __GFP_NOWARN);
+		if (!page) {
+			kfree_skb(skb);
+no_skb:
+			/* Any skbuffs queued for refill? Force them out. */
+			if (i != 0)
+				goto refill;
+			/* Could not allocate any skbuffs. Try again later. */
+			mod_timer(&np->rx_refill_timer,
+				  jiffies + (HZ/10));
+			break;
+		}
+
+		skb_shinfo(skb)->frags[0].page = page;
+		skb_shinfo(skb)->nr_frags = 1;
+		__skb_queue_tail(&np->rx_batch, skb);
+	}
+
+	/* Is the batch large enough to be worthwhile? */
+	if (i < (np->rx_target/2)) {
+		if (req_prod > np->rx.sring->req_prod)
+			goto push;
+		return;
+	}
+
+	/* Adjust our fill target if we risked running out of buffers. */
+	if (((req_prod - np->rx.sring->rsp_prod) < (np->rx_target / 4)) &&
+	    ((np->rx_target *= 2) > np->rx_max_target))
+		np->rx_target = np->rx_max_target;
+
+ refill:
+	for (nr_flips = i = 0; ; i++) {
+		skb = __skb_dequeue(&np->rx_batch);
+		if (skb == NULL)
+			break;
+
+		skb->dev = dev;
+
+		id = xennet_rxidx(req_prod + i);
+
+		BUG_ON(np->rx_skbs[id]);
+		np->rx_skbs[id] = skb;
+
+		ref = gnttab_claim_grant_reference(&np->gref_rx_head);
+		BUG_ON((signed short)ref < 0);
+		np->grant_rx_ref[id] = ref;
+
+		pfn = page_to_pfn(skb_shinfo(skb)->frags[0].page);
+		vaddr = page_address(skb_shinfo(skb)->frags[0].page);
+
+		req = RING_GET_REQUEST(&np->rx, req_prod + i);
+		gnttab_grant_foreign_access_ref(ref,
+						np->xbdev->otherend_id,
+						pfn_to_mfn(pfn),
+						0);
+
+		req->id = id;
+		req->gref = ref;
+	}
+
+	if (nr_flips != 0) {
+		reservation.extent_start = np->rx_pfn_array;
+		reservation.nr_extents   = nr_flips;
+		reservation.extent_order = 0;
+		reservation.address_bits = 0;
+		reservation.domid        = DOMID_SELF;
+
+		if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+			/* After all PTEs have been zapped, flush the TLB. */
+			np->rx_mcl[i-1].args[MULTI_UVMFLAGS_INDEX] =
+				UVMF_TLB_FLUSH|UVMF_ALL;
+
+			/* Give away a batch of pages. */
+			np->rx_mcl[i].op = __HYPERVISOR_memory_op;
+			np->rx_mcl[i].args[0] = XENMEM_decrease_reservation;
+			np->rx_mcl[i].args[1] = (unsigned long)&reservation;
+
+			/* Zap PTEs and give away pages in one big
+			 * multicall. */
+			(void)HYPERVISOR_multicall(np->rx_mcl, i+1);
+
+			/* Check return status of HYPERVISOR_memory_op(). */
+			if (unlikely(np->rx_mcl[i].result != i))
+				panic("Unable to reduce memory reservation\n");
+		} else {
+			if (HYPERVISOR_memory_op(XENMEM_decrease_reservation,
+						 &reservation) != i)
+				panic("Unable to reduce memory reservation\n");
+		}
+	} else {
+		wmb();		/* barrier so backend seens requests */
+	}
+
+	/* Above is a suitable barrier to ensure backend will see requests. */
+	np->rx.req_prod_pvt = req_prod + i;
+ push:
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&np->rx, notify);
+	if (notify)
+		notify_remote_via_irq(np->netdev->irq);
+}
+
+static int xennet_open(struct net_device *dev)
+{
+	struct netfront_info *np = netdev_priv(dev);
+
+	memset(&np->stats, 0, sizeof(np->stats));
+
+	spin_lock_bh(&np->rx_lock);
+	if (netif_carrier_ok(dev)) {
+		xennet_alloc_rx_buffers(dev);
+		np->rx.sring->rsp_event = np->rx.rsp_cons + 1;
+		if (RING_HAS_UNCONSUMED_RESPONSES(&np->rx))
+			netif_rx_schedule(dev);
+	}
+	spin_unlock_bh(&np->rx_lock);
+
+	xennet_maybe_wake_tx(dev);
+
+	return 0;
+}
+
+static void xennet_tx_buf_gc(struct net_device *dev)
+{
+	RING_IDX cons, prod;
+	unsigned short id;
+	struct netfront_info *np = netdev_priv(dev);
+	struct sk_buff *skb;
+
+	BUG_ON(!netif_carrier_ok(dev));
+
+	do {
+		prod = np->tx.sring->rsp_prod;
+		rmb(); /* Ensure we see responses up to 'rp'. */
+
+		for (cons = np->tx.rsp_cons; cons != prod; cons++) {
+			struct xen_netif_tx_response *txrsp;
+
+			txrsp = RING_GET_RESPONSE(&np->tx, cons);
+			if (txrsp->status == NETIF_RSP_NULL)
+				continue;
+
+			id  = txrsp->id;
+			skb = np->tx_skbs[id].skb;
+			if (unlikely(gnttab_query_foreign_access(
+				np->grant_tx_ref[id]) != 0)) {
+				printk(KERN_ALERT "xennet_tx_buf_gc: warning "
+				       "-- grant still in use by backend "
+				       "domain.\n");
+				BUG();
+			}
+			gnttab_end_foreign_access_ref(
+				np->grant_tx_ref[id], GNTMAP_readonly);
+			gnttab_release_grant_reference(
+				&np->gref_tx_head, np->grant_tx_ref[id]);
+			np->grant_tx_ref[id] = GRANT_INVALID_REF;
+			add_id_to_freelist(&np->tx_skb_freelist, np->tx_skbs, id);
+			dev_kfree_skb_irq(skb);
+		}
+
+		np->tx.rsp_cons = prod;
+
+		/*
+		 * Set a new event, then check for race with update of tx_cons.
+		 * Note that it is essential to schedule a callback, no matter
+		 * how few buffers are pending. Even if there is space in the
+		 * transmit ring, higher layers may be blocked because too much
+		 * data is outstanding: in such cases notification from Xen is
+		 * likely to be the only kick that we'll get.
+		 */
+		np->tx.sring->rsp_event =
+			prod + ((np->tx.sring->req_prod - prod) >> 1) + 1;
+		mb();		/* update shared area */
+	} while ((cons == prod) && (prod != np->tx.sring->rsp_prod));
+
+	xennet_maybe_wake_tx(dev);
+}
+
+static void xennet_make_frags(struct sk_buff *skb, struct net_device *dev,
+			      struct xen_netif_tx_request *tx)
+{
+	struct netfront_info *np = netdev_priv(dev);
+	char *data = skb->data;
+	unsigned long mfn;
+	RING_IDX prod = np->tx.req_prod_pvt;
+	int frags = skb_shinfo(skb)->nr_frags;
+	unsigned int offset = offset_in_page(data);
+	unsigned int len = skb_headlen(skb);
+	unsigned int id;
+	grant_ref_t ref;
+	int i;
+
+	/* While the header overlaps a page boundary (including being
+	   larger than a page), split it it into page-sized chunks. */
+	while (len > PAGE_SIZE - offset) {
+		tx->size = PAGE_SIZE - offset;
+		tx->flags |= NETTXF_more_data;
+		len -= tx->size;
+		data += tx->size;
+		offset = 0;
+
+		id = get_id_from_freelist(&np->tx_skb_freelist, np->tx_skbs);
+		np->tx_skbs[id].skb = skb_get(skb);
+		tx = RING_GET_REQUEST(&np->tx, prod++);
+		tx->id = id;
+		ref = gnttab_claim_grant_reference(&np->gref_tx_head);
+		BUG_ON((signed short)ref < 0);
+
+		mfn = virt_to_mfn(data);
+		gnttab_grant_foreign_access_ref(ref, np->xbdev->otherend_id,
+						mfn, GNTMAP_readonly);
+
+		tx->gref = np->grant_tx_ref[id] = ref;
+		tx->offset = offset;
+		tx->size = len;
+		tx->flags = 0;
+	}
+
+	/* Grant backend access to each skb fragment page. */
+	for (i = 0; i < frags; i++) {
+		skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+
+		tx->flags |= NETTXF_more_data;
+
+		id = get_id_from_freelist(&np->tx_skb_freelist, np->tx_skbs);
+		np->tx_skbs[id].skb = skb_get(skb);
+		tx = RING_GET_REQUEST(&np->tx, prod++);
+		tx->id = id;
+		ref = gnttab_claim_grant_reference(&np->gref_tx_head);
+		BUG_ON((signed short)ref < 0);
+
+		mfn = pfn_to_mfn(page_to_pfn(frag->page));
+		gnttab_grant_foreign_access_ref(ref, np->xbdev->otherend_id,
+						mfn, GNTMAP_readonly);
+
+		tx->gref = np->grant_tx_ref[id] = ref;
+		tx->offset = frag->page_offset;
+		tx->size = frag->size;
+		tx->flags = 0;
+	}
+
+	np->tx.req_prod_pvt = prod;
+}
+
+static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	unsigned short id;
+	struct netfront_info *np = netdev_priv(dev);
+	struct xen_netif_tx_request *tx;
+	struct xen_netif_extra_info *extra;
+	char *data = skb->data;
+	RING_IDX i;
+	grant_ref_t ref;
+	unsigned long mfn;
+	int notify;
+	int frags = skb_shinfo(skb)->nr_frags;
+	unsigned int offset = offset_in_page(data);
+	unsigned int len = skb_headlen(skb);
+
+	frags += (offset + len + PAGE_SIZE - 1) / PAGE_SIZE;
+	if (unlikely(frags > MAX_SKB_FRAGS + 1)) {
+		printk(KERN_ALERT "xennet: skb rides the rocket: %d frags\n",
+		       frags);
+		dump_stack();
+		goto drop;
+	}
+
+	spin_lock_irq(&np->tx_lock);
+
+	if (unlikely(!netif_carrier_ok(dev) ||
+		     (frags > 1 && !xennet_can_sg(dev)) ||
+		     netif_needs_gso(dev, skb))) {
+		spin_unlock_irq(&np->tx_lock);
+		goto drop;
+	}
+
+	i = np->tx.req_prod_pvt;
+
+	id = get_id_from_freelist(&np->tx_skb_freelist, np->tx_skbs);
+	np->tx_skbs[id].skb = skb;
+
+	tx = RING_GET_REQUEST(&np->tx, i);
+
+	tx->id   = id;
+	ref = gnttab_claim_grant_reference(&np->gref_tx_head);
+	BUG_ON((signed short)ref < 0);
+	mfn = virt_to_mfn(data);
+	gnttab_grant_foreign_access_ref(
+		ref, np->xbdev->otherend_id, mfn, GNTMAP_readonly);
+	tx->gref = np->grant_tx_ref[id] = ref;
+	tx->offset = offset;
+	tx->size = len;
+	extra = NULL;
+
+	tx->flags = 0;
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		/* local packet? */
+		tx->flags |= NETTXF_csum_blank | NETTXF_data_validated;
+	else if (skb->ip_summed == CHECKSUM_UNNECESSARY)
+		/* remote but checksummed. */
+		tx->flags |= NETTXF_data_validated;
+
+	if (skb_shinfo(skb)->gso_size) {
+		struct xen_netif_extra_info *gso;
+
+		gso = (struct xen_netif_extra_info *)
+			RING_GET_REQUEST(&np->tx, ++i);
+
+		if (extra)
+			extra->flags |= XEN_NETIF_EXTRA_FLAG_MORE;
+		else
+			tx->flags |= NETTXF_extra_info;
+
+		gso->u.gso.size = skb_shinfo(skb)->gso_size;
+		gso->u.gso.type = XEN_NETIF_GSO_TYPE_TCPV4;
+		gso->u.gso.pad = 0;
+		gso->u.gso.features = 0;
+
+		gso->type = XEN_NETIF_EXTRA_TYPE_GSO;
+		gso->flags = 0;
+		extra = gso;
+	}
+
+	np->tx.req_prod_pvt = i + 1;
+
+	xennet_make_frags(skb, dev, tx);
+	tx->size = skb->len;
+
+	RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&np->tx, notify);
+	if (notify)
+		notify_remote_via_irq(np->netdev->irq);
+
+	xennet_tx_buf_gc(dev);
+
+	if (!netfront_tx_slot_available(np))
+		netif_stop_queue(dev);
+
+	spin_unlock_irq(&np->tx_lock);
+
+	np->stats.tx_bytes += skb->len;
+	np->stats.tx_packets++;
+
+	return 0;
+
+ drop:
+	np->stats.tx_dropped++;
+	dev_kfree_skb(skb);
+	return 0;
+}
+
+static int xennet_close(struct net_device *dev)
+{
+	struct netfront_info *np = netdev_priv(dev);
+	netif_stop_queue(np->netdev);
+	return 0;
+}
+
+static struct net_device_stats *xennet_get_stats(struct net_device *dev)
+{
+	struct netfront_info *np = netdev_priv(dev);
+	return &np->stats;
+}
+
+static void xennet_move_rx_slot(struct netfront_info *np, struct sk_buff *skb,
+				grant_ref_t ref)
+{
+	int new = xennet_rxidx(np->rx.req_prod_pvt);
+
+	BUG_ON(np->rx_skbs[new]);
+	np->rx_skbs[new] = skb;
+	np->grant_rx_ref[new] = ref;
+	RING_GET_REQUEST(&np->rx, np->rx.req_prod_pvt)->id = new;
+	RING_GET_REQUEST(&np->rx, np->rx.req_prod_pvt)->gref = ref;
+	np->rx.req_prod_pvt++;
+}
+
+static int xennet_get_extras(struct netfront_info *np,
+			     struct xen_netif_extra_info *extras,
+			     RING_IDX rp)
+
+{
+	struct xen_netif_extra_info *extra;
+	struct device *dev = &np->netdev->dev;
+	RING_IDX cons = np->rx.rsp_cons;
+	int err = 0;
+
+	do {
+		struct sk_buff *skb;
+		grant_ref_t ref;
+
+		if (unlikely(cons + 1 == rp)) {
+			if (net_ratelimit())
+				dev_warn(dev, "Missing extra info\n");
+			err = -EBADR;
+			break;
+		}
+
+		extra = (struct xen_netif_extra_info *)
+			RING_GET_RESPONSE(&np->rx, ++cons);
+
+		if (unlikely(!extra->type ||
+			     extra->type >= XEN_NETIF_EXTRA_TYPE_MAX)) {
+			if (net_ratelimit())
+				dev_warn(dev, "Invalid extra type: %d\n",
+					extra->type);
+			err = -EINVAL;
+		} else {
+			memcpy(&extras[extra->type - 1], extra,
+			       sizeof(*extra));
+		}
+
+		skb = xennet_get_rx_skb(np, cons);
+		ref = xennet_get_rx_ref(np, cons);
+		xennet_move_rx_slot(np, skb, ref);
+	} while (extra->flags & XEN_NETIF_EXTRA_FLAG_MORE);
+
+	np->rx.rsp_cons = cons;
+	return err;
+}
+
+static int xennet_get_responses(struct netfront_info *np,
+				struct netfront_rx_info *rinfo, RING_IDX rp,
+				struct sk_buff_head *list)
+{
+	struct xen_netif_rx_response *rx = &rinfo->rx;
+	struct xen_netif_extra_info *extras = rinfo->extras;
+	struct device *dev = &np->netdev->dev;
+	RING_IDX cons = np->rx.rsp_cons;
+	struct sk_buff *skb = xennet_get_rx_skb(np, cons);
+	grant_ref_t ref = xennet_get_rx_ref(np, cons);
+	int max = MAX_SKB_FRAGS + (rx->status <= RX_COPY_THRESHOLD);
+	int frags = 1;
+	int err = 0;
+	unsigned long ret;
+
+	if (rx->flags & NETRXF_extra_info) {
+		err = xennet_get_extras(np, extras, rp);
+		cons = np->rx.rsp_cons;
+	}
+
+	for (;;) {
+		if (unlikely(rx->status < 0 ||
+			     rx->offset + rx->status > PAGE_SIZE)) {
+			if (net_ratelimit())
+				dev_warn(dev, "rx->offset: %x, size: %u\n",
+					 rx->offset, rx->status);
+			xennet_move_rx_slot(np, skb, ref);
+			err = -EINVAL;
+			goto next;
+		}
+
+		/*
+		 * This definitely indicates a bug, either in this driver or in
+		 * the backend driver. In future this should flag the bad
+		 * situation to the system controller to reboot the backed.
+		 */
+		if (ref == GRANT_INVALID_REF) {
+			if (net_ratelimit())
+				dev_warn(dev, "Bad rx response id %d.\n",
+					 rx->id);
+			err = -EINVAL;
+			goto next;
+		}
+
+		ret = gnttab_end_foreign_access_ref(ref, 0);
+		BUG_ON(!ret);
+
+		gnttab_release_grant_reference(&np->gref_rx_head, ref);
+
+		__skb_queue_tail(list, skb);
+
+next:
+		if (!(rx->flags & NETRXF_more_data))
+			break;
+
+		if (cons + frags == rp) {
+			if (net_ratelimit())
+				dev_warn(dev, "Need more frags\n");
+			err = -ENOENT;
+			break;
+		}
+
+		rx = RING_GET_RESPONSE(&np->rx, cons + frags);
+		skb = xennet_get_rx_skb(np, cons + frags);
+		ref = xennet_get_rx_ref(np, cons + frags);
+		frags++;
+	}
+
+	if (unlikely(frags > max)) {
+		if (net_ratelimit())
+			dev_warn(dev, "Too many frags\n");
+		err = -E2BIG;
+	}
+
+	if (unlikely(err))
+		np->rx.rsp_cons = cons + frags;
+
+	return err;
+}
+
+static int xennet_set_skb_gso(struct sk_buff *skb,
+			      struct xen_netif_extra_info *gso)
+{
+	if (!gso->u.gso.size) {
+		if (net_ratelimit())
+			printk(KERN_WARNING "GSO size must not be zero.\n");
+		return -EINVAL;
+	}
+
+	/* Currently only TCPv4 S.O. is supported. */
+	if (gso->u.gso.type != XEN_NETIF_GSO_TYPE_TCPV4) {
+		if (net_ratelimit())
+			printk(KERN_WARNING "Bad GSO type %d.\n", gso->u.gso.type);
+		return -EINVAL;
+	}
+
+	skb_shinfo(skb)->gso_size = gso->u.gso.size;
+	skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
+
+	/* Header must be checked, and gso_segs computed. */
+	skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY;
+	skb_shinfo(skb)->gso_segs = 0;
+
+	return 0;
+}
+
+static RING_IDX xennet_fill_frags(struct netfront_info *np,
+				  struct sk_buff *skb,
+				  struct sk_buff_head *list)
+{
+	struct skb_shared_info *shinfo = skb_shinfo(skb);
+	int nr_frags = shinfo->nr_frags;
+	RING_IDX cons = np->rx.rsp_cons;
+	skb_frag_t *frag = shinfo->frags + nr_frags;
+	struct sk_buff *nskb;
+
+	while ((nskb = __skb_dequeue(list))) {
+		struct xen_netif_rx_response *rx =
+			RING_GET_RESPONSE(&np->rx, ++cons);
+
+		frag->page = skb_shinfo(nskb)->frags[0].page;
+		frag->page_offset = rx->offset;
+		frag->size = rx->status;
+
+		skb->data_len += rx->status;
+
+		skb_shinfo(nskb)->nr_frags = 0;
+		kfree_skb(nskb);
+
+		frag++;
+		nr_frags++;
+	}
+
+	shinfo->nr_frags = nr_frags;
+	return cons;
+}
+
+static int skb_checksum_setup(struct sk_buff *skb)
+{
+	struct iphdr *iph;
+	unsigned char *th;
+	int err = -EPROTO;
+
+	if (skb->protocol != htons(ETH_P_IP))
+		goto out;
+
+	iph = (void *)skb->data;
+	th = skb->data + 4 * iph->ihl;
+	if (th >= skb_tail_pointer(skb))
+		goto out;
+
+	skb->csum_start = th - skb->head;
+	switch (iph->protocol) {
+	case IPPROTO_TCP:
+		skb->csum_offset = offsetof(struct tcphdr, check);
+		break;
+	case IPPROTO_UDP:
+		skb->csum_offset = offsetof(struct udphdr, check);
+		break;
+	default:
+		if (net_ratelimit())
+			printk(KERN_ERR "Attempting to checksum a non-"
+			       "TCP/UDP packet, dropping a protocol"
+			       " %d packet", iph->protocol);
+		goto out;
+	}
+
+	if ((th + skb->csum_offset + 2) > skb_tail_pointer(skb))
+		goto out;
+
+	err = 0;
+
+out:
+	return err;
+}
+
+static int handle_incoming_queue(struct net_device *dev,
+				  struct sk_buff_head *rxq)
+{
+	struct netfront_info *np = netdev_priv(dev);
+	int packets_dropped = 0;
+	struct sk_buff *skb;
+
+	while ((skb = __skb_dequeue(rxq)) != NULL) {
+		struct page *page = NETFRONT_SKB_CB(skb)->page;
+		void *vaddr = page_address(page);
+		unsigned offset = NETFRONT_SKB_CB(skb)->offset;
+
+		memcpy(skb->data, vaddr + offset,
+		       skb_headlen(skb));
+
+		if (page != skb_shinfo(skb)->frags[0].page)
+			__free_page(page);
+
+		/* Ethernet work: Delayed to here as it peeks the header. */
+		skb->protocol = eth_type_trans(skb, dev);
+
+		if (skb->ip_summed == CHECKSUM_PARTIAL) {
+			if (skb_checksum_setup(skb)) {
+				kfree_skb(skb);
+				packets_dropped++;
+				np->stats.rx_errors++;
+				continue;
+			}
+		}
+
+		np->stats.rx_packets++;
+		np->stats.rx_bytes += skb->len;
+
+		/* Pass it up. */
+		netif_receive_skb(skb);
+		dev->last_rx = jiffies;
+	}
+
+	return packets_dropped;
+}
+
+static int xennet_poll(struct net_device *dev, int *pbudget)
+{
+	struct netfront_info *np = netdev_priv(dev);
+	struct sk_buff *skb;
+	struct netfront_rx_info rinfo;
+	struct xen_netif_rx_response *rx = &rinfo.rx;
+	struct xen_netif_extra_info *extras = rinfo.extras;
+	RING_IDX i, rp;
+	int work_done, budget, more_to_do = 1;
+	struct sk_buff_head rxq;
+	struct sk_buff_head errq;
+	struct sk_buff_head tmpq;
+	unsigned long flags;
+	unsigned int len;
+	int err;
+
+	spin_lock(&np->rx_lock);
+
+	if (unlikely(!netif_carrier_ok(dev))) {
+		spin_unlock(&np->rx_lock);
+		return 0;
+	}
+
+	skb_queue_head_init(&rxq);
+	skb_queue_head_init(&errq);
+	skb_queue_head_init(&tmpq);
+
+	budget = *pbudget;
+	if (budget > dev->quota)
+		budget = dev->quota;
+	rp = np->rx.sring->rsp_prod;
+	rmb(); /* Ensure we see queued responses up to 'rp'. */
+
+	i = np->rx.rsp_cons;
+	work_done = 0;
+	while ((i != rp) && (work_done < budget)) {
+		memcpy(rx, RING_GET_RESPONSE(&np->rx, i), sizeof(*rx));
+		memset(extras, 0, sizeof(rinfo.extras));
+
+		err = xennet_get_responses(np, &rinfo, rp, &tmpq);
+
+		if (unlikely(err)) {
+err:
+			while ((skb = __skb_dequeue(&tmpq)))
+				__skb_queue_tail(&errq, skb);
+			np->stats.rx_errors++;
+			i = np->rx.rsp_cons;
+			continue;
+		}
+
+		skb = __skb_dequeue(&tmpq);
+
+		if (extras[XEN_NETIF_EXTRA_TYPE_GSO - 1].type) {
+			struct xen_netif_extra_info *gso;
+			gso = &extras[XEN_NETIF_EXTRA_TYPE_GSO - 1];
+
+			if (unlikely(xennet_set_skb_gso(skb, gso))) {
+				__skb_queue_head(&tmpq, skb);
+				np->rx.rsp_cons += skb_queue_len(&tmpq);
+				goto err;
+			}
+		}
+
+		NETFRONT_SKB_CB(skb)->page = skb_shinfo(skb)->frags[0].page;
+		NETFRONT_SKB_CB(skb)->offset = rx->offset;
+
+		len = rx->status;
+		if (len > RX_COPY_THRESHOLD)
+			len = RX_COPY_THRESHOLD;
+		skb_put(skb, len);
+
+		if (rx->status > len) {
+			skb_shinfo(skb)->frags[0].page_offset =
+				rx->offset + len;
+			skb_shinfo(skb)->frags[0].size = rx->status - len;
+			skb->data_len = rx->status - len;
+		} else {
+			skb_shinfo(skb)->frags[0].page = NULL;
+			skb_shinfo(skb)->nr_frags = 0;
+		}
+
+		i = xennet_fill_frags(np, skb, &tmpq);
+
+		/*
+		 * Truesize approximates the size of true data plus
+		 * any supervisor overheads. Adding hypervisor
+		 * overheads has been shown to significantly reduce
+		 * achievable bandwidth with the default receive
+		 * buffer size. It is therefore not wise to account
+		 * for it here.
+		 *
+		 * After alloc_skb(RX_COPY_THRESHOLD), truesize is set
+		 * to RX_COPY_THRESHOLD + the supervisor
+		 * overheads. Here, we add the size of the data pulled
+		 * in xennet_fill_frags().
+		 *
+		 * We also adjust for any unused space in the main
+		 * data area by subtracting (RX_COPY_THRESHOLD -
+		 * len). This is especially important with drivers
+		 * which split incoming packets into header and data,
+		 * using only 66 bytes of the main data area (see the
+		 * e1000 driver for example.)  On such systems,
+		 * without this last adjustement, our achievable
+		 * receive throughout using the standard receive
+		 * buffer size was cut by 25%(!!!).
+		 */
+		skb->truesize += skb->data_len - (RX_COPY_THRESHOLD - len);
+		skb->len += skb->data_len;
+
+		if (rx->flags & NETRXF_csum_blank)
+			skb->ip_summed = CHECKSUM_PARTIAL;
+		else if (rx->flags & NETRXF_data_validated)
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		__skb_queue_tail(&rxq, skb);
+
+		np->rx.rsp_cons = ++i;
+		work_done++;
+	}
+
+	while ((skb = __skb_dequeue(&errq)))
+		kfree_skb(skb);
+
+	work_done -= handle_incoming_queue(dev, &rxq);
+
+	/* If we get a callback with very few responses, reduce fill target. */
+	/* NB. Note exponential increase, linear decrease. */
+	if (((np->rx.req_prod_pvt - np->rx.sring->rsp_prod) >
+	     ((3*np->rx_target) / 4)) &&
+	    (--np->rx_target < np->rx_min_target))
+		np->rx_target = np->rx_min_target;
+
+	xennet_alloc_rx_buffers(dev);
+
+	*pbudget   -= work_done;
+	dev->quota -= work_done;
+
+	if (work_done < budget) {
+		local_irq_save(flags);
+
+		RING_FINAL_CHECK_FOR_RESPONSES(&np->rx, more_to_do);
+		if (!more_to_do)
+			__netif_rx_complete(dev);
+
+		local_irq_restore(flags);
+	}
+
+	spin_unlock(&np->rx_lock);
+
+	return more_to_do;
+}
+
+static int xennet_change_mtu(struct net_device *dev, int mtu)
+{
+	int max = xennet_can_sg(dev) ? 65535 - ETH_HLEN : ETH_DATA_LEN;
+
+	if (mtu > max)
+		return -EINVAL;
+	dev->mtu = mtu;
+	return 0;
+}
+
+static void xennet_release_tx_bufs(struct netfront_info *np)
+{
+	struct sk_buff *skb;
+	int i;
+
+	for (i = 0; i < NET_TX_RING_SIZE; i++) {
+		/* Skip over entries which are actually freelist references */
+		if ((unsigned long)np->tx_skbs[i].skb < PAGE_OFFSET)
+			continue;
+
+		skb = np->tx_skbs[i].skb;
+		gnttab_end_foreign_access_ref(np->grant_tx_ref[i],
+					      GNTMAP_readonly);
+		gnttab_release_grant_reference(&np->gref_tx_head,
+					       np->grant_tx_ref[i]);
+		np->grant_tx_ref[i] = GRANT_INVALID_REF;
+		add_id_to_freelist(&np->tx_skb_freelist, np->tx_skbs, i);
+		dev_kfree_skb_irq(skb);
+	}
+}
+
+static void xennet_release_rx_bufs(struct netfront_info *np)
+{
+	struct mmu_update      *mmu = np->rx_mmu;
+	struct multicall_entry *mcl = np->rx_mcl;
+	struct sk_buff_head free_list;
+	struct sk_buff *skb;
+	unsigned long mfn;
+	int xfer = 0, noxfer = 0, unused = 0;
+	int id, ref;
+
+	dev_warn(&np->netdev->dev, "%s: fix me for copying receiver.\n",
+			 __func__);
+	return;
+
+	skb_queue_head_init(&free_list);
+
+	spin_lock_bh(&np->rx_lock);
+
+	for (id = 0; id < NET_RX_RING_SIZE; id++) {
+		ref = np->grant_rx_ref[id];
+		if (ref == GRANT_INVALID_REF) {
+			unused++;
+			continue;
+		}
+
+		skb = np->rx_skbs[id];
+		mfn = gnttab_end_foreign_transfer_ref(ref);
+		gnttab_release_grant_reference(&np->gref_rx_head, ref);
+		np->grant_rx_ref[id] = GRANT_INVALID_REF;
+
+		if (0 == mfn) {
+			skb_shinfo(skb)->nr_frags = 0;
+			dev_kfree_skb(skb);
+			noxfer++;
+			continue;
+		}
+
+		if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+			/* Remap the page. */
+			struct page *page = skb_shinfo(skb)->frags[0].page;
+			unsigned long pfn = page_to_pfn(page);
+			void *vaddr = page_address(page);
+
+			MULTI_update_va_mapping(mcl, (unsigned long)vaddr,
+						mfn_pte(mfn, PAGE_KERNEL),
+						0);
+			mcl++;
+			mmu->ptr = ((u64)mfn << PAGE_SHIFT)
+				| MMU_MACHPHYS_UPDATE;
+			mmu->val = pfn;
+			mmu++;
+
+			set_phys_to_machine(pfn, mfn);
+		}
+		__skb_queue_tail(&free_list, skb);
+		xfer++;
+	}
+
+	dev_info(&np->netdev->dev, "%s: %d xfer, %d noxfer, %d unused\n",
+		 __func__, xfer, noxfer, unused);
+
+	if (xfer) {
+		if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+			/* Do all the remapping work and M2P updates. */
+			MULTI_mmu_update(mcl, np->rx_mmu, mmu - np->rx_mmu,
+					 0, DOMID_SELF);
+			mcl++;
+			HYPERVISOR_multicall(np->rx_mcl, mcl - np->rx_mcl);
+		}
+	}
+
+	while ((skb = __skb_dequeue(&free_list)) != NULL)
+		dev_kfree_skb(skb);
+
+	spin_unlock_bh(&np->rx_lock);
+}
+
+static void xennet_uninit(struct net_device *dev)
+{
+	struct netfront_info *np = netdev_priv(dev);
+	xennet_release_tx_bufs(np);
+	xennet_release_rx_bufs(np);
+	gnttab_free_grant_references(np->gref_tx_head);
+	gnttab_free_grant_references(np->gref_rx_head);
+}
+
+static struct net_device * __devinit xennet_create_dev(struct xenbus_device *dev)
+{
+	int i, err;
+	struct net_device *netdev;
+	struct netfront_info *np;
+
+	netdev = alloc_etherdev(sizeof(struct netfront_info));
+	if (!netdev) {
+		printk(KERN_WARNING "%s> alloc_etherdev failed.\n",
+		       __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	np                   = netdev_priv(netdev);
+	np->xbdev            = dev;
+
+	spin_lock_init(&np->tx_lock);
+	spin_lock_init(&np->rx_lock);
+
+	skb_queue_head_init(&np->rx_batch);
+	np->rx_target     = RX_DFL_MIN_TARGET;
+	np->rx_min_target = RX_DFL_MIN_TARGET;
+	np->rx_max_target = RX_MAX_TARGET;
+
+	init_timer(&np->rx_refill_timer);
+	np->rx_refill_timer.data = (unsigned long)netdev;
+	np->rx_refill_timer.function = rx_refill_timeout;
+
+	/* Initialise tx_skbs as a free chain containing every entry. */
+	np->tx_skb_freelist = 0;
+	for (i = 0; i < NET_TX_RING_SIZE; i++) {
+		np->tx_skbs[i].link = i+1;
+		np->grant_tx_ref[i] = GRANT_INVALID_REF;
+	}
+
+	/* Clear out rx_skbs */
+	for (i = 0; i < NET_RX_RING_SIZE; i++) {
+		np->rx_skbs[i] = NULL;
+		np->grant_rx_ref[i] = GRANT_INVALID_REF;
+	}
+
+	/* A grant for every tx ring slot */
+	if (gnttab_alloc_grant_references(TX_MAX_TARGET,
+					  &np->gref_tx_head) < 0) {
+		printk(KERN_ALERT "#### netfront can't alloc tx grant refs\n");
+		err = -ENOMEM;
+		goto exit;
+	}
+	/* A grant for every rx ring slot */
+	if (gnttab_alloc_grant_references(RX_MAX_TARGET,
+					  &np->gref_rx_head) < 0) {
+		printk(KERN_ALERT "#### netfront can't alloc rx grant refs\n");
+		err = -ENOMEM;
+		goto exit_free_tx;
+	}
+
+	netdev->open            = xennet_open;
+	netdev->hard_start_xmit = xennet_start_xmit;
+	netdev->stop            = xennet_close;
+	netdev->get_stats       = xennet_get_stats;
+	netdev->poll            = xennet_poll;
+	netdev->uninit          = xennet_uninit;
+	netdev->change_mtu	= xennet_change_mtu;
+	netdev->weight          = 64;
+	netdev->features        = NETIF_F_IP_CSUM;
+
+	SET_ETHTOOL_OPS(netdev, &xennet_ethtool_ops);
+	SET_MODULE_OWNER(netdev);
+	SET_NETDEV_DEV(netdev, &dev->dev);
+
+	np->netdev = netdev;
+
+	netif_carrier_off(netdev);
+
+	return netdev;
+
+ exit_free_tx:
+	gnttab_free_grant_references(np->gref_tx_head);
+ exit:
+	free_netdev(netdev);
+	return ERR_PTR(err);
+}
+
+/**
+ * Entry point to this code when a new device is created.  Allocate the basic
+ * structures and the ring buffers for communication with the backend, and
+ * inform the backend of the appropriate details for those.
+ */
+static int __devinit netfront_probe(struct xenbus_device *dev,
+				    const struct xenbus_device_id *id)
+{
+	int err;
+	struct net_device *netdev;
+	struct netfront_info *info;
+
+	netdev = xennet_create_dev(dev);
+	if (IS_ERR(netdev)) {
+		err = PTR_ERR(netdev);
+		xenbus_dev_fatal(dev, err, "creating netdev");
+		return err;
+	}
+
+	info = netdev_priv(netdev);
+	dev->dev.driver_data = info;
+
+	err = register_netdev(info->netdev);
+	if (err) {
+		printk(KERN_WARNING "%s: register_netdev err=%d\n",
+		       __func__, err);
+		goto fail;
+	}
+
+	err = xennet_sysfs_addif(info->netdev);
+	if (err) {
+		unregister_netdev(info->netdev);
+		printk(KERN_WARNING "%s: add sysfs failed err=%d\n",
+		       __func__, err);
+		goto fail;
+	}
+
+	return 0;
+
+ fail:
+	free_netdev(netdev);
+	dev->dev.driver_data = NULL;
+	return err;
+}
+
+static void xennet_end_access(int ref, void *page)
+{
+	/* This frees the page as a side-effect */
+	if (ref != GRANT_INVALID_REF)
+		gnttab_end_foreign_access(ref, 0, (unsigned long)page);
+}
+
+static void xennet_disconnect_backend(struct netfront_info *info)
+{
+	/* Stop old i/f to prevent errors whilst we rebuild the state. */
+	spin_lock_bh(&info->rx_lock);
+	spin_lock_irq(&info->tx_lock);
+	netif_carrier_off(info->netdev);
+	spin_unlock_irq(&info->tx_lock);
+	spin_unlock_bh(&info->rx_lock);
+
+	if (info->netdev->irq)
+		unbind_from_irqhandler(info->netdev->irq, info->netdev);
+	info->evtchn = info->netdev->irq = 0;
+
+	/* End access and free the pages */
+	xennet_end_access(info->tx_ring_ref, info->tx.sring);
+	xennet_end_access(info->rx_ring_ref, info->rx.sring);
+
+	info->tx_ring_ref = GRANT_INVALID_REF;
+	info->rx_ring_ref = GRANT_INVALID_REF;
+	info->tx.sring = NULL;
+	info->rx.sring = NULL;
+}
+
+/**
+ * We are reconnecting to the backend, due to a suspend/resume, or a backend
+ * driver restart.  We tear down our netif structure and recreate it, but
+ * leave the device-layer structures intact so that this is transparent to the
+ * rest of the kernel.
+ */
+static int netfront_resume(struct xenbus_device *dev)
+{
+	struct netfront_info *info = dev->dev.driver_data;
+
+	dev_dbg(&dev->dev, "%s\n", dev->nodename);
+
+	xennet_disconnect_backend(info);
+	return 0;
+}
+
+static int xen_net_read_mac(struct xenbus_device *dev, u8 mac[])
+{
+	char *s, *e, *macstr;
+	int i;
+
+	macstr = s = xenbus_read(XBT_NIL, dev->nodename, "mac", NULL);
+	if (IS_ERR(macstr))
+		return PTR_ERR(macstr);
+
+	for (i = 0; i < ETH_ALEN; i++) {
+		mac[i] = simple_strtoul(s, &e, 16);
+		if ((s == e) || (*e != ((i == ETH_ALEN-1) ? '\0' : ':'))) {
+			kfree(macstr);
+			return -ENOENT;
+		}
+		s = e+1;
+	}
+
+	kfree(macstr);
+	return 0;
+}
+
+static irqreturn_t xennet_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct netfront_info *np = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&np->tx_lock, flags);
+
+	if (likely(netif_carrier_ok(dev))) {
+		xennet_tx_buf_gc(dev);
+		/* Under tx_lock: protects access to rx shared-ring indexes. */
+		if (RING_HAS_UNCONSUMED_RESPONSES(&np->rx))
+			netif_rx_schedule(dev);
+	}
+
+	spin_unlock_irqrestore(&np->tx_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int setup_netfront(struct xenbus_device *dev, struct netfront_info *info)
+{
+	struct xen_netif_tx_sring *txs;
+	struct xen_netif_rx_sring *rxs;
+	int err;
+	struct net_device *netdev = info->netdev;
+
+	info->tx_ring_ref = GRANT_INVALID_REF;
+	info->rx_ring_ref = GRANT_INVALID_REF;
+	info->rx.sring = NULL;
+	info->tx.sring = NULL;
+	netdev->irq = 0;
+
+	err = xen_net_read_mac(dev, netdev->dev_addr);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "parsing %s/mac", dev->nodename);
+		goto fail;
+	}
+
+	txs = (struct xen_netif_tx_sring *)get_zeroed_page(GFP_KERNEL);
+	if (!txs) {
+		err = -ENOMEM;
+		xenbus_dev_fatal(dev, err, "allocating tx ring page");
+		goto fail;
+	}
+	SHARED_RING_INIT(txs);
+	FRONT_RING_INIT(&info->tx, txs, PAGE_SIZE);
+
+	err = xenbus_grant_ring(dev, virt_to_mfn(txs));
+	if (err < 0) {
+		free_page((unsigned long)txs);
+		goto fail;
+	}
+
+	info->tx_ring_ref = err;
+	rxs = (struct xen_netif_rx_sring *)get_zeroed_page(GFP_KERNEL);
+	if (!rxs) {
+		err = -ENOMEM;
+		xenbus_dev_fatal(dev, err, "allocating rx ring page");
+		goto fail;
+	}
+	SHARED_RING_INIT(rxs);
+	FRONT_RING_INIT(&info->rx, rxs, PAGE_SIZE);
+
+	err = xenbus_grant_ring(dev, virt_to_mfn(rxs));
+	if (err < 0) {
+		free_page((unsigned long)rxs);
+		goto fail;
+	}
+	info->rx_ring_ref = err;
+
+	err = xenbus_alloc_evtchn(dev, &info->evtchn);
+	if (err)
+		goto fail;
+
+	err = bind_evtchn_to_irqhandler(info->evtchn, xennet_interrupt,
+					IRQF_SAMPLE_RANDOM, netdev->name,
+					netdev);
+	if (err < 0)
+		goto fail;
+	netdev->irq = err;
+	return 0;
+
+ fail:
+	return err;
+}
+
+/* Common code used when first setting up, and when resuming. */
+static int talk_to_backend(struct xenbus_device *dev,
+			   struct netfront_info *info)
+{
+	const char *message;
+	struct xenbus_transaction xbt;
+	int err;
+
+	/* Create shared ring, alloc event channel. */
+	err = setup_netfront(dev, info);
+	if (err)
+		goto out;
+
+again:
+	err = xenbus_transaction_start(&xbt);
+	if (err) {
+		xenbus_dev_fatal(dev, err, "starting transaction");
+		goto destroy_ring;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "tx-ring-ref", "%u",
+			    info->tx_ring_ref);
+	if (err) {
+		message = "writing tx ring-ref";
+		goto abort_transaction;
+	}
+	err = xenbus_printf(xbt, dev->nodename, "rx-ring-ref", "%u",
+			    info->rx_ring_ref);
+	if (err) {
+		message = "writing rx ring-ref";
+		goto abort_transaction;
+	}
+	err = xenbus_printf(xbt, dev->nodename,
+			    "event-channel", "%u", info->evtchn);
+	if (err) {
+		message = "writing event-channel";
+		goto abort_transaction;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "request-rx-copy", "%u",
+			    1);
+	if (err) {
+		message = "writing request-rx-copy";
+		goto abort_transaction;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "feature-rx-notify", "%d", 1);
+	if (err) {
+		message = "writing feature-rx-notify";
+		goto abort_transaction;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "feature-sg", "%d", 1);
+	if (err) {
+		message = "writing feature-sg";
+		goto abort_transaction;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "feature-gso-tcpv4", "%d", 1);
+	if (err) {
+		message = "writing feature-gso-tcpv4";
+		goto abort_transaction;
+	}
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err) {
+		if (err == -EAGAIN)
+			goto again;
+		xenbus_dev_fatal(dev, err, "completing transaction");
+		goto destroy_ring;
+	}
+
+	return 0;
+
+ abort_transaction:
+	xenbus_transaction_end(xbt, 1);
+	xenbus_dev_fatal(dev, err, "%s", message);
+ destroy_ring:
+	xennet_disconnect_backend(info);
+ out:
+	return err;
+}
+
+static int xennet_set_sg(struct net_device *dev, u32 data)
+{
+	if (data) {
+		struct netfront_info *np = netdev_priv(dev);
+		int val;
+
+		if (xenbus_scanf(XBT_NIL, np->xbdev->otherend, "feature-sg",
+				 "%d", &val) < 0)
+			val = 0;
+		if (!val)
+			return -ENOSYS;
+	} else if (dev->mtu > ETH_DATA_LEN)
+		dev->mtu = ETH_DATA_LEN;
+
+	return ethtool_op_set_sg(dev, data);
+}
+
+static int xennet_set_tso(struct net_device *dev, u32 data)
+{
+	if (data) {
+		struct netfront_info *np = netdev_priv(dev);
+		int val;
+
+		if (xenbus_scanf(XBT_NIL, np->xbdev->otherend,
+				 "feature-gso-tcpv4", "%d", &val) < 0)
+			val = 0;
+		if (!val)
+			return -ENOSYS;
+	}
+
+	return ethtool_op_set_tso(dev, data);
+}
+
+static void xennet_set_features(struct net_device *dev)
+{
+	/* Turn off all GSO bits except ROBUST. */
+	dev->features &= (1 << NETIF_F_GSO_SHIFT) - 1;
+	dev->features |= NETIF_F_GSO_ROBUST;
+	xennet_set_sg(dev, 0);
+
+	/* We need checksum offload to enable scatter/gather and TSO. */
+	if (!(dev->features & NETIF_F_IP_CSUM))
+		return;
+
+	if (!xennet_set_sg(dev, 1))
+		xennet_set_tso(dev, 1);
+}
+
+static int xennet_connect(struct net_device *dev)
+{
+	struct netfront_info *np = netdev_priv(dev);
+	int i, requeue_idx, err;
+	struct sk_buff *skb;
+	grant_ref_t ref;
+	struct xen_netif_rx_request *req;
+	unsigned int feature_rx_copy;
+
+	err = xenbus_scanf(XBT_NIL, np->xbdev->otherend,
+			   "feature-rx-copy", "%u", &feature_rx_copy);
+	if (err != 1)
+		feature_rx_copy = 0;
+
+	if (!feature_rx_copy) {
+		dev_info(&dev->dev,
+			 "backend does not support copying recieve path");
+		return -ENODEV;
+	}
+
+	err = talk_to_backend(np->xbdev, np);
+	if (err)
+		return err;
+
+	xennet_set_features(dev);
+
+	spin_lock_bh(&np->rx_lock);
+	spin_lock_irq(&np->tx_lock);
+
+	/* Step 1: Discard all pending TX packet fragments. */
+	xennet_release_tx_bufs(np);
+
+	/* Step 2: Rebuild the RX buffer freelist and the RX ring itself. */
+	for (requeue_idx = 0, i = 0; i < NET_RX_RING_SIZE; i++) {
+		if (!np->rx_skbs[i])
+			continue;
+
+		skb = np->rx_skbs[requeue_idx] = xennet_get_rx_skb(np, i);
+		ref = np->grant_rx_ref[requeue_idx] = xennet_get_rx_ref(np, i);
+		req = RING_GET_REQUEST(&np->rx, requeue_idx);
+
+		gnttab_grant_foreign_access_ref(
+			ref, np->xbdev->otherend_id,
+			pfn_to_mfn(page_to_pfn(skb_shinfo(skb)->
+					       frags->page)),
+			0);
+		req->gref = ref;
+		req->id   = requeue_idx;
+
+		requeue_idx++;
+	}
+
+	np->rx.req_prod_pvt = requeue_idx;
+
+	/*
+	 * Step 3: All public and private state should now be sane.  Get
+	 * ready to start sending and receiving packets and give the driver
+	 * domain a kick because we've probably just requeued some
+	 * packets.
+	 */
+	netif_carrier_on(np->netdev);
+	notify_remote_via_irq(np->netdev->irq);
+	xennet_tx_buf_gc(dev);
+	xennet_alloc_rx_buffers(dev);
+
+	spin_unlock_irq(&np->tx_lock);
+	spin_unlock_bh(&np->rx_lock);
+
+	return 0;
+}
+
+/**
+ * Callback received when the backend's state changes.
+ */
+static void backend_changed(struct xenbus_device *dev,
+			    enum xenbus_state backend_state)
+{
+	struct netfront_info *np = dev->dev.driver_data;
+	struct net_device *netdev = np->netdev;
+
+	dev_dbg(&dev->dev, "%s\n", xenbus_strstate(backend_state));
+
+	switch (backend_state) {
+	case XenbusStateInitialising:
+	case XenbusStateInitialised:
+	case XenbusStateConnected:
+	case XenbusStateUnknown:
+	case XenbusStateClosed:
+		break;
+
+	case XenbusStateInitWait:
+		if (dev->state != XenbusStateInitialising)
+			break;
+		if (xennet_connect(netdev) != 0)
+			break;
+		xenbus_switch_state(dev, XenbusStateConnected);
+		break;
+
+	case XenbusStateClosing:
+		xenbus_frontend_closed(dev);
+		break;
+	}
+}
+
+static struct ethtool_ops xennet_ethtool_ops =
+{
+	.get_tx_csum = ethtool_op_get_tx_csum,
+	.set_tx_csum = ethtool_op_set_tx_csum,
+	.get_sg = ethtool_op_get_sg,
+	.set_sg = xennet_set_sg,
+	.get_tso = ethtool_op_get_tso,
+	.set_tso = xennet_set_tso,
+	.get_link = ethtool_op_get_link,
+};
+
+#ifdef CONFIG_SYSFS
+static ssize_t show_rxbuf_min(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	struct netfront_info *info = netdev_priv(netdev);
+
+	return sprintf(buf, "%u\n", info->rx_min_target);
+}
+
+static ssize_t store_rxbuf_min(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t len)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	struct netfront_info *np = netdev_priv(netdev);
+	char *endp;
+	unsigned long target;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	target = simple_strtoul(buf, &endp, 0);
+	if (endp == buf)
+		return -EBADMSG;
+
+	if (target < RX_MIN_TARGET)
+		target = RX_MIN_TARGET;
+	if (target > RX_MAX_TARGET)
+		target = RX_MAX_TARGET;
+
+	spin_lock_bh(&np->rx_lock);
+	if (target > np->rx_max_target)
+		np->rx_max_target = target;
+	np->rx_min_target = target;
+	if (target > np->rx_target)
+		np->rx_target = target;
+
+	xennet_alloc_rx_buffers(netdev);
+
+	spin_unlock_bh(&np->rx_lock);
+	return len;
+}
+
+static ssize_t show_rxbuf_max(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	struct netfront_info *info = netdev_priv(netdev);
+
+	return sprintf(buf, "%u\n", info->rx_max_target);
+}
+
+static ssize_t store_rxbuf_max(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t len)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	struct netfront_info *np = netdev_priv(netdev);
+	char *endp;
+	unsigned long target;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	target = simple_strtoul(buf, &endp, 0);
+	if (endp == buf)
+		return -EBADMSG;
+
+	if (target < RX_MIN_TARGET)
+		target = RX_MIN_TARGET;
+	if (target > RX_MAX_TARGET)
+		target = RX_MAX_TARGET;
+
+	spin_lock_bh(&np->rx_lock);
+	if (target < np->rx_min_target)
+		np->rx_min_target = target;
+	np->rx_max_target = target;
+	if (target < np->rx_target)
+		np->rx_target = target;
+
+	xennet_alloc_rx_buffers(netdev);
+
+	spin_unlock_bh(&np->rx_lock);
+	return len;
+}
+
+static ssize_t show_rxbuf_cur(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	struct netfront_info *info = netdev_priv(netdev);
+
+	return sprintf(buf, "%u\n", info->rx_target);
+}
+
+static struct device_attribute xennet_attrs[] = {
+	__ATTR(rxbuf_min, S_IRUGO|S_IWUSR, show_rxbuf_min, store_rxbuf_min),
+	__ATTR(rxbuf_max, S_IRUGO|S_IWUSR, show_rxbuf_max, store_rxbuf_max),
+	__ATTR(rxbuf_cur, S_IRUGO, show_rxbuf_cur, NULL),
+};
+
+static int xennet_sysfs_addif(struct net_device *netdev)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(xennet_attrs); i++) {
+		err = device_create_file(&netdev->dev,
+					   &xennet_attrs[i]);
+		if (err)
+			goto fail;
+	}
+	return 0;
+
+ fail:
+	while (--i >= 0)
+		device_remove_file(&netdev->dev, &xennet_attrs[i]);
+	return err;
+}
+
+static void xennet_sysfs_delif(struct net_device *netdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(xennet_attrs); i++)
+		device_remove_file(&netdev->dev, &xennet_attrs[i]);
+}
+
+#endif /* CONFIG_SYSFS */
+
+static struct xenbus_device_id netfront_ids[] = {
+	{ "vif" },
+	{ "" }
+};
+
+
+static int __devexit xennet_remove(struct xenbus_device *dev)
+{
+	struct netfront_info *info = dev->dev.driver_data;
+
+	dev_dbg(&dev->dev, "%s\n", dev->nodename);
+
+	unregister_netdev(info->netdev);
+
+	xennet_disconnect_backend(info);
+
+	del_timer_sync(&info->rx_refill_timer);
+
+	xennet_sysfs_delif(info->netdev);
+
+	free_netdev(info->netdev);
+
+	return 0;
+}
+
+static struct xenbus_driver netfront = {
+	.name = "vif",
+	.owner = THIS_MODULE,
+	.ids = netfront_ids,
+	.probe = netfront_probe,
+	.remove = __devexit_p(xennet_remove),
+	.resume = netfront_resume,
+	.otherend_changed = backend_changed,
+};
+
+static int __init netif_init(void)
+{
+	if (!is_running_on_xen())
+		return -ENODEV;
+
+	if (is_initial_xendomain())
+		return 0;
+
+	printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
+
+	return xenbus_register_frontend(&netfront);
+}
+module_init(netif_init);
+
+
+static void __exit netif_exit(void)
+{
+	if (is_initial_xendomain())
+		return;
+
+	return xenbus_unregister_driver(&netfront);
+}
+module_exit(netif_exit);
+
+MODULE_DESCRIPTION("Xen virtual network device frontend");
+MODULE_LICENSE("GPL");
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index a708c32..38cdf9f 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -73,6 +73,7 @@
 #include <linux/termios.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/delay.h>
 
 #include <asm/io.h>
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
index 03baf1c..ed112ee 100644
--- a/drivers/pnp/pnpbios/core.c
+++ b/drivers/pnp/pnpbios/core.c
@@ -147,7 +147,7 @@
 		info->location_id, info->serial, info->capabilities);
 	envp[i] = NULL;
 	
-	value = call_usermodehelper (argv [0], argv, envp, 0);
+	value = call_usermodehelper (argv [0], argv, envp, UMH_WAIT_EXEC);
 	kfree (buf);
 	kfree (envp);
 	return 0;
diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c
index a54e414..e821a15 100644
--- a/drivers/sbus/char/bbc_envctrl.c
+++ b/drivers/sbus/char/bbc_envctrl.c
@@ -7,6 +7,7 @@
 #include <linux/kthread.h>
 #include <linux/delay.h>
 #include <linux/kmod.h>
+#include <linux/reboot.h>
 #include <asm/oplib.h>
 #include <asm/ebus.h>
 
@@ -170,8 +171,6 @@
 static void do_envctrl_shutdown(struct bbc_cpu_temperature *tp)
 {
 	static int shutting_down = 0;
-	static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/sbin:/usr/sbin:/bin:/usr/bin", NULL };
-	char *argv[] = { "/sbin/shutdown", "-h", "now", NULL };
 	char *type = "???";
 	s8 val = -1;
 
@@ -195,7 +194,7 @@
 	printk(KERN_CRIT "kenvctrld: Shutting down the system now.\n");
 
 	shutting_down = 1;
-	if (call_usermodehelper("/sbin/shutdown", argv, envp, 0) < 0)
+	if (orderly_poweroff(true) < 0)
 		printk(KERN_CRIT "envctrl: shutdown execution failed\n");
 }
 
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 8328aca..dadabef 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -26,6 +26,7 @@
 #include <linux/ioport.h>
 #include <linux/miscdevice.h>
 #include <linux/kmod.h>
+#include <linux/reboot.h>
 
 #include <asm/ebus.h>
 #include <asm/uaccess.h>
@@ -966,10 +967,6 @@
 static void envctrl_do_shutdown(void)
 {
 	static int inprog = 0;
-	static char *envp[] = {	
-		"HOME=/", "TERM=linux", "PATH=/sbin:/usr/sbin:/bin:/usr/bin", NULL };
-	char *argv[] = { 
-		"/sbin/shutdown", "-h", "now", NULL };	
 	int ret;
 
 	if (inprog != 0)
@@ -977,7 +974,7 @@
 
 	inprog = 1;
 	printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n");
-	ret = call_usermodehelper("/sbin/shutdown", argv, envp, 0);
+	ret = orderly_poweroff(true);
 	if (ret < 0) {
 		printk(KERN_CRIT "kenvctrld: WARNING: system shutdown failed!\n"); 
 		inprog = 0;  /* unlikely to succeed, but we could try again */
diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c
index 53e81a4..2cf0953 100644
--- a/drivers/serial/8250_hp300.c
+++ b/drivers/serial/8250_hp300.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/delay.h>
 #include <linux/dio.h>
 #include <linux/console.h>
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 7fa413d..18f6297 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -486,6 +486,36 @@
 
 	  If unsure, say Y.
 
+config SERIAL_ZS
+	tristate "DECstation Z85C30 serial support"
+	depends on MACH_DECSTATION
+	select SERIAL_CORE
+	default y
+	---help---
+	  Support for the Zilog 85C350 serial communications controller used
+	  for serial ports in newer DECstation systems.  These include the
+	  DECsystem 5900 and all models of the DECstation and DECsystem 5000
+	  systems except from model 200.
+
+	  If unsure, say Y.  To compile this driver as a module, choose M here:
+	  the module will be called zs.
+
+config SERIAL_ZS_CONSOLE
+	bool "Support for console on a DECstation Z85C30 serial port"
+	depends on SERIAL_ZS=y
+	select SERIAL_CORE_CONSOLE
+	default y
+	---help---
+	  If you say Y here, it will be possible to use a serial port as the
+	  system console (the system console is the device which receives all
+	  kernel messages and warnings and which allows logins in single user
+	  mode).
+
+	  Note that the firmware uses ttyS1 as the serial console on the
+	  Maxine and ttyS3 on the others using this driver.
+
+	  If unsure, say Y.
+
 config SERIAL_21285
 	tristate "DC21285 serial port support"
 	depends on ARM && FOOTBRIDGE
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index c48cdd6..af6377d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -43,6 +43,7 @@
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
+obj-$(CONFIG_SERIAL_ZS) += zs.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
 obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
 obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
new file mode 100644
index 0000000..65f1294
--- /dev/null
+++ b/drivers/serial/zs.c
@@ -0,0 +1,1287 @@
+/*
+ * zs.c: Serial port driver for IOASIC DECstations.
+ *
+ * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras.
+ * Derived from drivers/macintosh/macserial.c by Harald Koerfgen.
+ *
+ * DECstation changes
+ * Copyright (C) 1998-2000 Harald Koerfgen
+ * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007  Maciej W. Rozycki
+ *
+ * For the rest of the code the original Copyright applies:
+ * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ *
+ * Note: for IOASIC systems the wiring is as follows:
+ *
+ * mouse/keyboard:
+ * DIN-7 MJ-4  signal        SCC
+ * 2     1     TxD       <-  A.TxD
+ * 3     4     RxD       ->  A.RxD
+ *
+ * EIA-232/EIA-423:
+ * DB-25 MMJ-6 signal        SCC
+ * 2     2     TxD       <-  B.TxD
+ * 3     5     RxD       ->  B.RxD
+ * 4           RTS       <- ~A.RTS
+ * 5           CTS       -> ~B.CTS
+ * 6     6     DSR       -> ~A.SYNC
+ * 8           CD        -> ~B.DCD
+ * 12          DSRS(DCE) -> ~A.CTS  (*)
+ * 15          TxC       ->  B.TxC
+ * 17          RxC       ->  B.RxC
+ * 20    1     DTR       <- ~A.DTR
+ * 22          RI        -> ~A.DCD
+ * 23          DSRS(DTE) <- ~B.RTS
+ *
+ * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE)
+ *     is shared with DSRS(DTE) at pin 23.
+ *
+ * As you can immediately notice the wiring of the RTS, DTR and DSR signals
+ * is a bit odd.  This makes the handling of port B unnecessarily
+ * complicated and prevents the use of some automatic modes of operation.
+ */
+
+#if defined(CONFIG_SERIAL_ZS_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/bug.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irqflags.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/spinlock.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/types.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+#include <asm/dec/interrupts.h>
+#include <asm/dec/ioasic_addrs.h>
+#include <asm/dec/system.h>
+
+#include "zs.h"
+
+
+MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>");
+MODULE_DESCRIPTION("DECstation Z85C30 serial driver");
+MODULE_LICENSE("GPL");
+
+
+static char zs_name[] __initdata = "DECstation Z85C30 serial driver version ";
+static char zs_version[] __initdata = "0.10";
+
+/*
+ * It would be nice to dynamically allocate everything that
+ * depends on ZS_NUM_SCCS, so we could support any number of
+ * Z85C30s, but for now...
+ */
+#define ZS_NUM_SCCS	2		/* Max # of ZS chips supported.  */
+#define ZS_NUM_CHAN	2		/* 2 channels per chip.  */
+#define ZS_CHAN_A	0		/* Index of the channel A.  */
+#define ZS_CHAN_B	1		/* Index of the channel B.  */
+#define ZS_CHAN_IO_SIZE 8		/* IOMEM space size.  */
+#define ZS_CHAN_IO_STRIDE 4		/* Register alignment.  */
+#define ZS_CHAN_IO_OFFSET 1		/* The SCC resides on the high byte
+					   of the 16-bit IOBUS.  */
+#define ZS_CLOCK        7372800 	/* Z85C30 PCLK input clock rate.  */
+
+#define to_zport(uport) container_of(uport, struct zs_port, port)
+
+struct zs_parms {
+	resource_size_t scc[ZS_NUM_SCCS];
+	int irq[ZS_NUM_SCCS];
+};
+
+static struct zs_scc zs_sccs[ZS_NUM_SCCS];
+
+static u8 zs_init_regs[ZS_NUM_REGS] __initdata = {
+	0,				/* write 0 */
+	PAR_SPEC,			/* write 1 */
+	0,				/* write 2 */
+	0,				/* write 3 */
+	X16CLK | SB1,			/* write 4 */
+	0,				/* write 5 */
+	0, 0, 0,			/* write 6, 7, 8 */
+	MIE | DLC | NV,			/* write 9 */
+	NRZ,				/* write 10 */
+	TCBR | RCBR,			/* write 11 */
+	0, 0,				/* BRG time constant, write 12 + 13 */
+	BRSRC | BRENABL,		/* write 14 */
+	0,				/* write 15 */
+};
+
+/*
+ * Debugging.
+ */
+#undef ZS_DEBUG_REGS
+
+
+/*
+ * Reading and writing Z85C30 registers.
+ */
+static void recovery_delay(void)
+{
+	udelay(2);
+}
+
+static u8 read_zsreg(struct zs_port *zport, int reg)
+{
+	void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET;
+	u8 retval;
+
+	if (reg != 0) {
+		writeb(reg & 0xf, control);
+		fast_iob();
+		recovery_delay();
+	}
+	retval = readb(control);
+	recovery_delay();
+	return retval;
+}
+
+static void write_zsreg(struct zs_port *zport, int reg, u8 value)
+{
+	void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET;
+
+	if (reg != 0) {
+		writeb(reg & 0xf, control);
+		fast_iob(); recovery_delay();
+	}
+	writeb(value, control);
+	fast_iob();
+	recovery_delay();
+	return;
+}
+
+static u8 read_zsdata(struct zs_port *zport)
+{
+	void __iomem *data = zport->port.membase +
+			     ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET;
+	u8 retval;
+
+	retval = readb(data);
+	recovery_delay();
+	return retval;
+}
+
+static void write_zsdata(struct zs_port *zport, u8 value)
+{
+	void __iomem *data = zport->port.membase +
+			     ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET;
+
+	writeb(value, data);
+	fast_iob();
+	recovery_delay();
+	return;
+}
+
+#ifdef ZS_DEBUG_REGS
+void zs_dump(void)
+{
+	struct zs_port *zport;
+	int i, j;
+
+	for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) {
+		zport = &zs_sccs[i / ZS_NUM_CHAN].zport[i % ZS_NUM_CHAN];
+
+		if (!zport->scc)
+			continue;
+
+		for (j = 0; j < 16; j++)
+			printk("W%-2d = 0x%02x\t", j, zport->regs[j]);
+		printk("\n");
+		for (j = 0; j < 16; j++)
+			printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j));
+		printk("\n\n");
+	}
+}
+#endif
+
+
+static void zs_spin_lock_cond_irq(spinlock_t *lock, int irq)
+{
+	if (irq)
+		spin_lock_irq(lock);
+	else
+		spin_lock(lock);
+}
+
+static void zs_spin_unlock_cond_irq(spinlock_t *lock, int irq)
+{
+	if (irq)
+		spin_unlock_irq(lock);
+	else
+		spin_unlock(lock);
+}
+
+static int zs_receive_drain(struct zs_port *zport)
+{
+	int loops = 10000;
+
+	while ((read_zsreg(zport, R0) & Rx_CH_AV) && loops--)
+		read_zsdata(zport);
+	return loops;
+}
+
+static int zs_transmit_drain(struct zs_port *zport, int irq)
+{
+	struct zs_scc *scc = zport->scc;
+	int loops = 10000;
+
+	while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && loops--) {
+		zs_spin_unlock_cond_irq(&scc->zlock, irq);
+		udelay(2);
+		zs_spin_lock_cond_irq(&scc->zlock, irq);
+	}
+	return loops;
+}
+
+static int zs_line_drain(struct zs_port *zport, int irq)
+{
+	struct zs_scc *scc = zport->scc;
+	int loops = 10000;
+
+	while (!(read_zsreg(zport, R1) & ALL_SNT) && loops--) {
+		zs_spin_unlock_cond_irq(&scc->zlock, irq);
+		udelay(2);
+		zs_spin_lock_cond_irq(&scc->zlock, irq);
+	}
+	return loops;
+}
+
+
+static void load_zsregs(struct zs_port *zport, u8 *regs, int irq)
+{
+	/* Let the current transmission finish.  */
+	zs_line_drain(zport, irq);
+	/* Load 'em up.  */
+	write_zsreg(zport, R3, regs[3] & ~RxENABLE);
+	write_zsreg(zport, R5, regs[5] & ~TxENAB);
+	write_zsreg(zport, R4, regs[4]);
+	write_zsreg(zport, R9, regs[9]);
+	write_zsreg(zport, R1, regs[1]);
+	write_zsreg(zport, R2, regs[2]);
+	write_zsreg(zport, R10, regs[10]);
+	write_zsreg(zport, R14, regs[14] & ~BRENABL);
+	write_zsreg(zport, R11, regs[11]);
+	write_zsreg(zport, R12, regs[12]);
+	write_zsreg(zport, R13, regs[13]);
+	write_zsreg(zport, R14, regs[14]);
+	write_zsreg(zport, R15, regs[15]);
+	if (regs[3] & RxENABLE)
+		write_zsreg(zport, R3, regs[3]);
+	if (regs[5] & TxENAB)
+		write_zsreg(zport, R5, regs[5]);
+	return;
+}
+
+
+/*
+ * Status handling routines.
+ */
+
+/*
+ * zs_tx_empty() -- get the transmitter empty status
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * 	    is emptied.  On bus types like RS485, the transmitter must
+ * 	    release the bus after transmitting.  This must be done when
+ * 	    the transmit shift register is empty, not be done when the
+ * 	    transmit holding register is empty.  This functionality
+ * 	    allows an RS485 driver to be written in user space.
+ */
+static unsigned int zs_tx_empty(struct uart_port *uport)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	unsigned long flags;
+	u8 status;
+
+	spin_lock_irqsave(&scc->zlock, flags);
+	status = read_zsreg(zport, R1);
+	spin_unlock_irqrestore(&scc->zlock, flags);
+
+	return status & ALL_SNT ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int zs_raw_get_ab_mctrl(struct zs_port *zport_a,
+					struct zs_port *zport_b)
+{
+	u8 status_a, status_b;
+	unsigned int mctrl;
+
+	status_a = read_zsreg(zport_a, R0);
+	status_b = read_zsreg(zport_b, R0);
+
+	mctrl = ((status_b & CTS) ? TIOCM_CTS : 0) |
+		((status_b & DCD) ? TIOCM_CAR : 0) |
+		((status_a & DCD) ? TIOCM_RNG : 0) |
+		((status_a & SYNC_HUNT) ? TIOCM_DSR : 0);
+
+	return mctrl;
+}
+
+static unsigned int zs_raw_get_mctrl(struct zs_port *zport)
+{
+	struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A];
+
+	return zport != zport_a ? zs_raw_get_ab_mctrl(zport_a, zport) : 0;
+}
+
+static unsigned int zs_raw_xor_mctrl(struct zs_port *zport)
+{
+	struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A];
+	unsigned int mmask, mctrl, delta;
+	u8 mask_a, mask_b;
+
+	if (zport == zport_a)
+		return 0;
+
+	mask_a = zport_a->regs[15];
+	mask_b = zport->regs[15];
+
+	mmask = ((mask_b & CTSIE) ? TIOCM_CTS : 0) |
+		((mask_b & DCDIE) ? TIOCM_CAR : 0) |
+		((mask_a & DCDIE) ? TIOCM_RNG : 0) |
+		((mask_a & SYNCIE) ? TIOCM_DSR : 0);
+
+	mctrl = zport->mctrl;
+	if (mmask) {
+		mctrl &= ~mmask;
+		mctrl |= zs_raw_get_ab_mctrl(zport_a, zport) & mmask;
+	}
+
+	delta = mctrl ^ zport->mctrl;
+	if (delta)
+		zport->mctrl = mctrl;
+
+	return delta;
+}
+
+static unsigned int zs_get_mctrl(struct uart_port *uport)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	unsigned int mctrl;
+
+	spin_lock(&scc->zlock);
+	mctrl = zs_raw_get_mctrl(zport);
+	spin_unlock(&scc->zlock);
+
+	return mctrl;
+}
+
+static void zs_set_mctrl(struct uart_port *uport, unsigned int mctrl)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
+	u8 oldloop, newloop;
+
+	spin_lock(&scc->zlock);
+	if (zport != zport_a) {
+		if (mctrl & TIOCM_DTR)
+			zport_a->regs[5] |= DTR;
+		else
+			zport_a->regs[5] &= ~DTR;
+		if (mctrl & TIOCM_RTS)
+			zport_a->regs[5] |= RTS;
+		else
+			zport_a->regs[5] &= ~RTS;
+		write_zsreg(zport_a, R5, zport_a->regs[5]);
+	}
+
+	/* Rarely modified, so don't poke at hardware unless necessary. */
+	oldloop = zport->regs[14];
+	newloop = oldloop;
+	if (mctrl & TIOCM_LOOP)
+		newloop |= LOOPBAK;
+	else
+		newloop &= ~LOOPBAK;
+	if (newloop != oldloop) {
+		zport->regs[14] = newloop;
+		write_zsreg(zport, R14, zport->regs[14]);
+	}
+	spin_unlock(&scc->zlock);
+}
+
+static void zs_raw_stop_tx(struct zs_port *zport)
+{
+	write_zsreg(zport, R0, RES_Tx_P);
+	zport->tx_stopped = 1;
+}
+
+static void zs_stop_tx(struct uart_port *uport)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+
+	spin_lock(&scc->zlock);
+	zs_raw_stop_tx(zport);
+	spin_unlock(&scc->zlock);
+}
+
+static void zs_raw_transmit_chars(struct zs_port *);
+
+static void zs_start_tx(struct uart_port *uport)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+
+	spin_lock(&scc->zlock);
+	if (zport->tx_stopped) {
+		zs_transmit_drain(zport, 0);
+		zport->tx_stopped = 0;
+		zs_raw_transmit_chars(zport);
+	}
+	spin_unlock(&scc->zlock);
+}
+
+static void zs_stop_rx(struct uart_port *uport)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
+
+	spin_lock(&scc->zlock);
+	zport->regs[15] &= ~BRKIE;
+	zport->regs[1] &= ~(RxINT_MASK | TxINT_ENAB);
+	zport->regs[1] |= RxINT_DISAB;
+
+	if (zport != zport_a) {
+		/* A-side DCD tracks RI and SYNC tracks DSR.  */
+		zport_a->regs[15] &= ~(DCDIE | SYNCIE);
+		write_zsreg(zport_a, R15, zport_a->regs[15]);
+		if (!(zport_a->regs[15] & BRKIE)) {
+			zport_a->regs[1] &= ~EXT_INT_ENAB;
+			write_zsreg(zport_a, R1, zport_a->regs[1]);
+		}
+
+		/* This-side DCD tracks DCD and CTS tracks CTS.  */
+		zport->regs[15] &= ~(DCDIE | CTSIE);
+		zport->regs[1] &= ~EXT_INT_ENAB;
+	} else {
+		/* DCD tracks RI and SYNC tracks DSR for the B side.  */
+		if (!(zport->regs[15] & (DCDIE | SYNCIE)))
+			zport->regs[1] &= ~EXT_INT_ENAB;
+	}
+
+	write_zsreg(zport, R15, zport->regs[15]);
+	write_zsreg(zport, R1, zport->regs[1]);
+	spin_unlock(&scc->zlock);
+}
+
+static void zs_enable_ms(struct uart_port *uport)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
+
+	if (zport == zport_a)
+		return;
+
+	spin_lock(&scc->zlock);
+
+	/* Clear Ext interrupts if not being handled already.  */
+	if (!(zport_a->regs[1] & EXT_INT_ENAB))
+		write_zsreg(zport_a, R0, RES_EXT_INT);
+
+	/* A-side DCD tracks RI and SYNC tracks DSR.  */
+	zport_a->regs[1] |= EXT_INT_ENAB;
+	zport_a->regs[15] |= DCDIE | SYNCIE;
+
+	/* This-side DCD tracks DCD and CTS tracks CTS.  */
+	zport->regs[15] |= DCDIE | CTSIE;
+
+	zs_raw_xor_mctrl(zport);
+
+	write_zsreg(zport_a, R1, zport_a->regs[1]);
+	write_zsreg(zport_a, R15, zport_a->regs[15]);
+	write_zsreg(zport, R15, zport->regs[15]);
+	spin_unlock(&scc->zlock);
+}
+
+static void zs_break_ctl(struct uart_port *uport, int break_state)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&scc->zlock, flags);
+	if (break_state == -1)
+		zport->regs[5] |= SND_BRK;
+	else
+		zport->regs[5] &= ~SND_BRK;
+	write_zsreg(zport, R5, zport->regs[5]);
+	spin_unlock_irqrestore(&scc->zlock, flags);
+}
+
+
+/*
+ * Interrupt handling routines.
+ */
+#define Rx_BRK 0x0100			/* BREAK event software flag.  */
+#define Rx_SYS 0x0200			/* SysRq event software flag.  */
+
+static void zs_receive_chars(struct zs_port *zport)
+{
+	struct uart_port *uport = &zport->port;
+	struct zs_scc *scc = zport->scc;
+	struct uart_icount *icount;
+	unsigned int avail, status, ch, flag;
+	int count;
+
+	for (count = 16; count; count--) {
+		spin_lock(&scc->zlock);
+		avail = read_zsreg(zport, R0) & Rx_CH_AV;
+		spin_unlock(&scc->zlock);
+		if (!avail)
+			break;
+
+		spin_lock(&scc->zlock);
+		status = read_zsreg(zport, R1) & (Rx_OVR | FRM_ERR | PAR_ERR);
+		ch = read_zsdata(zport);
+		spin_unlock(&scc->zlock);
+
+		flag = TTY_NORMAL;
+
+		icount = &uport->icount;
+		icount->rx++;
+
+		/* Handle the null char got when BREAK is removed.  */
+		if (!ch)
+			status |= zport->tty_break;
+		if (unlikely(status &
+			     (Rx_OVR | FRM_ERR | PAR_ERR | Rx_SYS | Rx_BRK))) {
+			zport->tty_break = 0;
+
+			/* Reset the error indication.  */
+			if (status & (Rx_OVR | FRM_ERR | PAR_ERR)) {
+				spin_lock(&scc->zlock);
+				write_zsreg(zport, R0, ERR_RES);
+				spin_unlock(&scc->zlock);
+			}
+
+			if (status & (Rx_SYS | Rx_BRK)) {
+				icount->brk++;
+				/* SysRq discards the null char.  */
+				if (status & Rx_SYS)
+					continue;
+			} else if (status & FRM_ERR)
+				icount->frame++;
+			else if (status & PAR_ERR)
+				icount->parity++;
+			if (status & Rx_OVR)
+				icount->overrun++;
+
+			status &= uport->read_status_mask;
+			if (status & Rx_BRK)
+				flag = TTY_BREAK;
+			else if (status & FRM_ERR)
+				flag = TTY_FRAME;
+			else if (status & PAR_ERR)
+				flag = TTY_PARITY;
+		}
+
+		if (uart_handle_sysrq_char(uport, ch))
+			continue;
+
+		uart_insert_char(uport, status, Rx_OVR, ch, flag);
+	}
+
+	tty_flip_buffer_push(uport->info->tty);
+}
+
+static void zs_raw_transmit_chars(struct zs_port *zport)
+{
+	struct circ_buf *xmit = &zport->port.info->xmit;
+
+	/* XON/XOFF chars.  */
+	if (zport->port.x_char) {
+		write_zsdata(zport, zport->port.x_char);
+		zport->port.icount.tx++;
+		zport->port.x_char = 0;
+		return;
+	}
+
+	/* If nothing to do or stopped or hardware stopped.  */
+	if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) {
+		zs_raw_stop_tx(zport);
+		return;
+	}
+
+	/* Send char.  */
+	write_zsdata(zport, xmit->buf[xmit->tail]);
+	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+	zport->port.icount.tx++;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&zport->port);
+
+	/* Are we are done?  */
+	if (uart_circ_empty(xmit))
+		zs_raw_stop_tx(zport);
+}
+
+static void zs_transmit_chars(struct zs_port *zport)
+{
+	struct zs_scc *scc = zport->scc;
+
+	spin_lock(&scc->zlock);
+	zs_raw_transmit_chars(zport);
+	spin_unlock(&scc->zlock);
+}
+
+static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a)
+{
+	struct uart_port *uport = &zport->port;
+	struct zs_scc *scc = zport->scc;
+	unsigned int delta;
+	u8 status, brk;
+
+	spin_lock(&scc->zlock);
+
+	/* Get status from Read Register 0.  */
+	status = read_zsreg(zport, R0);
+
+	if (zport->regs[15] & BRKIE) {
+		brk = status & BRK_ABRT;
+		if (brk && !zport->brk) {
+			spin_unlock(&scc->zlock);
+			if (uart_handle_break(uport))
+				zport->tty_break = Rx_SYS;
+			else
+				zport->tty_break = Rx_BRK;
+			spin_lock(&scc->zlock);
+		}
+		zport->brk = brk;
+	}
+
+	if (zport != zport_a) {
+		delta = zs_raw_xor_mctrl(zport);
+		spin_unlock(&scc->zlock);
+
+		if (delta & TIOCM_CTS)
+			uart_handle_cts_change(uport,
+					       zport->mctrl & TIOCM_CTS);
+		if (delta & TIOCM_CAR)
+			uart_handle_dcd_change(uport,
+					       zport->mctrl & TIOCM_CAR);
+		if (delta & TIOCM_RNG)
+			uport->icount.dsr++;
+		if (delta & TIOCM_DSR)
+			uport->icount.rng++;
+
+		if (delta)
+			wake_up_interruptible(&uport->info->delta_msr_wait);
+
+		spin_lock(&scc->zlock);
+	}
+
+	/* Clear the status condition...  */
+	write_zsreg(zport, R0, RES_EXT_INT);
+
+	spin_unlock(&scc->zlock);
+}
+
+/*
+ * This is the Z85C30 driver's generic interrupt routine.
+ */
+static irqreturn_t zs_interrupt(int irq, void *dev_id)
+{
+	struct zs_scc *scc = dev_id;
+	struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
+	struct zs_port *zport_b = &scc->zport[ZS_CHAN_B];
+	irqreturn_t status = IRQ_NONE;
+	u8 zs_intreg;
+	int count;
+
+	/*
+	 * NOTE: The read register 3, which holds the irq status,
+	 *       does so for both channels on each chip.  Although
+	 *       the status value itself must be read from the A
+	 *       channel and is only valid when read from channel A.
+	 *       Yes... broken hardware...
+	 */
+	for (count = 16; count; count--) {
+		spin_lock(&scc->zlock);
+		zs_intreg = read_zsreg(zport_a, R3);
+		spin_unlock(&scc->zlock);
+		if (!zs_intreg)
+			break;
+
+		/*
+		 * We do not like losing characters, so we prioritise
+		 * interrupt sources a little bit differently than
+		 * the SCC would, was it allowed to.
+		 */
+		if (zs_intreg & CHBRxIP)
+			zs_receive_chars(zport_b);
+		if (zs_intreg & CHARxIP)
+			zs_receive_chars(zport_a);
+		if (zs_intreg & CHBEXT)
+			zs_status_handle(zport_b, zport_a);
+		if (zs_intreg & CHAEXT)
+			zs_status_handle(zport_a, zport_a);
+		if (zs_intreg & CHBTxIP)
+			zs_transmit_chars(zport_b);
+		if (zs_intreg & CHATxIP)
+			zs_transmit_chars(zport_a);
+
+		status = IRQ_HANDLED;
+	}
+
+	return status;
+}
+
+
+/*
+ * Finally, routines used to initialize the serial port.
+ */
+static int zs_startup(struct uart_port *uport)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	unsigned long flags;
+	int irq_guard;
+	int ret;
+
+	irq_guard = atomic_add_return(1, &scc->irq_guard);
+	if (irq_guard == 1) {
+		ret = request_irq(zport->port.irq, zs_interrupt,
+				  IRQF_SHARED, "scc", scc);
+		if (ret) {
+			atomic_add(-1, &scc->irq_guard);
+			printk(KERN_ERR "zs: can't get irq %d\n",
+			       zport->port.irq);
+			return ret;
+		}
+	}
+
+	spin_lock_irqsave(&scc->zlock, flags);
+
+	/* Clear the receive FIFO.  */
+	zs_receive_drain(zport);
+
+	/* Clear the interrupt registers.  */
+	write_zsreg(zport, R0, ERR_RES);
+	write_zsreg(zport, R0, RES_Tx_P);
+	/* But Ext only if not being handled already.  */
+	if (!(zport->regs[1] & EXT_INT_ENAB))
+		write_zsreg(zport, R0, RES_EXT_INT);
+
+	/* Finally, enable sequencing and interrupts.  */
+	zport->regs[1] &= ~RxINT_MASK;
+	zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB;
+	zport->regs[3] |= RxENABLE;
+	zport->regs[5] |= TxENAB;
+	zport->regs[15] |= BRKIE;
+	write_zsreg(zport, R1, zport->regs[1]);
+	write_zsreg(zport, R3, zport->regs[3]);
+	write_zsreg(zport, R5, zport->regs[5]);
+	write_zsreg(zport, R15, zport->regs[15]);
+
+	/* Record the current state of RR0.  */
+	zport->mctrl = zs_raw_get_mctrl(zport);
+	zport->brk = read_zsreg(zport, R0) & BRK_ABRT;
+
+	zport->tx_stopped = 1;
+
+	spin_unlock_irqrestore(&scc->zlock, flags);
+
+	return 0;
+}
+
+static void zs_shutdown(struct uart_port *uport)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	unsigned long flags;
+	int irq_guard;
+
+	spin_lock_irqsave(&scc->zlock, flags);
+
+	zport->regs[5] &= ~TxENAB;
+	zport->regs[3] &= ~RxENABLE;
+	write_zsreg(zport, R5, zport->regs[5]);
+	write_zsreg(zport, R3, zport->regs[3]);
+
+	spin_unlock_irqrestore(&scc->zlock, flags);
+
+	irq_guard = atomic_add_return(-1, &scc->irq_guard);
+	if (!irq_guard)
+		free_irq(zport->port.irq, scc);
+}
+
+
+static void zs_reset(struct zs_port *zport)
+{
+	struct zs_scc *scc = zport->scc;
+	int irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&scc->zlock, flags);
+	irq = !irqs_disabled_flags(flags);
+	if (!scc->initialised) {
+		/* Reset the pointer first, just in case...  */
+		read_zsreg(zport, R0);
+		/* And let the current transmission finish.  */
+		zs_line_drain(zport, irq);
+		write_zsreg(zport, R9, FHWRES);
+		udelay(10);
+		write_zsreg(zport, R9, 0);
+		scc->initialised = 1;
+	}
+	load_zsregs(zport, zport->regs, irq);
+	spin_unlock_irqrestore(&scc->zlock, flags);
+}
+
+static void zs_set_termios(struct uart_port *uport, struct ktermios *termios,
+			   struct ktermios *old_termios)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
+	int irq;
+	unsigned int baud, brg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&scc->zlock, flags);
+	irq = !irqs_disabled_flags(flags);
+
+	/* Byte size.  */
+	zport->regs[3] &= ~RxNBITS_MASK;
+	zport->regs[5] &= ~TxNBITS_MASK;
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		zport->regs[3] |= Rx5;
+		zport->regs[5] |= Tx5;
+		break;
+	case CS6:
+		zport->regs[3] |= Rx6;
+		zport->regs[5] |= Tx6;
+		break;
+	case CS7:
+		zport->regs[3] |= Rx7;
+		zport->regs[5] |= Tx7;
+		break;
+	case CS8:
+	default:
+		zport->regs[3] |= Rx8;
+		zport->regs[5] |= Tx8;
+		break;
+	}
+
+	/* Parity and stop bits.  */
+	zport->regs[4] &= ~(XCLK_MASK | SB_MASK | PAR_ENA | PAR_EVEN);
+	if (termios->c_cflag & CSTOPB)
+		zport->regs[4] |= SB2;
+	else
+		zport->regs[4] |= SB1;
+	if (termios->c_cflag & PARENB)
+		zport->regs[4] |= PAR_ENA;
+	if (!(termios->c_cflag & PARODD))
+		zport->regs[4] |= PAR_EVEN;
+	switch (zport->clk_mode) {
+	case 64:
+		zport->regs[4] |= X64CLK;
+		break;
+	case 32:
+		zport->regs[4] |= X32CLK;
+		break;
+	case 16:
+		zport->regs[4] |= X16CLK;
+		break;
+	case 1:
+		zport->regs[4] |= X1CLK;
+		break;
+	default:
+		BUG();
+	}
+
+	baud = uart_get_baud_rate(uport, termios, old_termios, 0,
+				  uport->uartclk / zport->clk_mode / 4);
+
+	brg = ZS_BPS_TO_BRG(baud, uport->uartclk / zport->clk_mode);
+	zport->regs[12] = brg & 0xff;
+	zport->regs[13] = (brg >> 8) & 0xff;
+
+	uart_update_timeout(uport, termios->c_cflag, baud);
+
+	uport->read_status_mask = Rx_OVR;
+	if (termios->c_iflag & INPCK)
+		uport->read_status_mask |= FRM_ERR | PAR_ERR;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		uport->read_status_mask |= Rx_BRK;
+
+	uport->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		uport->ignore_status_mask |= FRM_ERR | PAR_ERR;
+	if (termios->c_iflag & IGNBRK) {
+		uport->ignore_status_mask |= Rx_BRK;
+		if (termios->c_iflag & IGNPAR)
+			uport->ignore_status_mask |= Rx_OVR;
+	}
+
+	if (termios->c_cflag & CREAD)
+		zport->regs[3] |= RxENABLE;
+	else
+		zport->regs[3] &= ~RxENABLE;
+
+	if (zport != zport_a) {
+		if (!(termios->c_cflag & CLOCAL)) {
+			zport->regs[15] |= DCDIE;
+		} else
+			zport->regs[15] &= ~DCDIE;
+		if (termios->c_cflag & CRTSCTS) {
+			zport->regs[15] |= CTSIE;
+		} else
+			zport->regs[15] &= ~CTSIE;
+		zs_raw_xor_mctrl(zport);
+	}
+
+	/* Load up the new values.  */
+	load_zsregs(zport, zport->regs, irq);
+
+	spin_unlock_irqrestore(&scc->zlock, flags);
+}
+
+
+static const char *zs_type(struct uart_port *uport)
+{
+	return "Z85C30 SCC";
+}
+
+static void zs_release_port(struct uart_port *uport)
+{
+	iounmap(uport->membase);
+	uport->membase = 0;
+	release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE);
+}
+
+static int zs_map_port(struct uart_port *uport)
+{
+	if (!uport->membase)
+		uport->membase = ioremap_nocache(uport->mapbase,
+						 ZS_CHAN_IO_SIZE);
+	if (!uport->membase) {
+		printk(KERN_ERR "zs: Cannot map MMIO\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int zs_request_port(struct uart_port *uport)
+{
+	int ret;
+
+	if (!request_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE, "scc")) {
+		printk(KERN_ERR "zs: Unable to reserve MMIO resource\n");
+		return -EBUSY;
+	}
+	ret = zs_map_port(uport);
+	if (ret) {
+		release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE);
+		return ret;
+	}
+	return 0;
+}
+
+static void zs_config_port(struct uart_port *uport, int flags)
+{
+	struct zs_port *zport = to_zport(uport);
+
+	if (flags & UART_CONFIG_TYPE) {
+		if (zs_request_port(uport))
+			return;
+
+		uport->type = PORT_ZS;
+
+		zs_reset(zport);
+	}
+}
+
+static int zs_verify_port(struct uart_port *uport, struct serial_struct *ser)
+{
+	struct zs_port *zport = to_zport(uport);
+	int ret = 0;
+
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_ZS)
+		ret = -EINVAL;
+	if (ser->irq != uport->irq)
+		ret = -EINVAL;
+	if (ser->baud_base != uport->uartclk / zport->clk_mode / 4)
+		ret = -EINVAL;
+	return ret;
+}
+
+
+static struct uart_ops zs_ops = {
+	.tx_empty	= zs_tx_empty,
+	.set_mctrl	= zs_set_mctrl,
+	.get_mctrl	= zs_get_mctrl,
+	.stop_tx	= zs_stop_tx,
+	.start_tx	= zs_start_tx,
+	.stop_rx	= zs_stop_rx,
+	.enable_ms	= zs_enable_ms,
+	.break_ctl	= zs_break_ctl,
+	.startup	= zs_startup,
+	.shutdown	= zs_shutdown,
+	.set_termios	= zs_set_termios,
+	.type		= zs_type,
+	.release_port	= zs_release_port,
+	.request_port	= zs_request_port,
+	.config_port	= zs_config_port,
+	.verify_port	= zs_verify_port,
+};
+
+/*
+ * Initialize Z85C30 port structures.
+ */
+static int __init zs_probe_sccs(void)
+{
+	static int probed;
+	struct zs_parms zs_parms;
+	int chip, side, irq;
+	int n_chips = 0;
+	int i;
+
+	if (probed)
+		return 0;
+
+	irq = dec_interrupt[DEC_IRQ_SCC0];
+	if (irq >= 0) {
+		zs_parms.scc[n_chips] = IOASIC_SCC0;
+		zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC0];
+		n_chips++;
+	}
+	irq = dec_interrupt[DEC_IRQ_SCC1];
+	if (irq >= 0) {
+		zs_parms.scc[n_chips] = IOASIC_SCC1;
+		zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC1];
+		n_chips++;
+	}
+	if (!n_chips)
+		return -ENXIO;
+
+	probed = 1;
+
+	for (chip = 0; chip < n_chips; chip++) {
+		spin_lock_init(&zs_sccs[chip].zlock);
+		for (side = 0; side < ZS_NUM_CHAN; side++) {
+			struct zs_port *zport = &zs_sccs[chip].zport[side];
+			struct uart_port *uport = &zport->port;
+
+			zport->scc	= &zs_sccs[chip];
+			zport->clk_mode	= 16;
+
+			uport->irq	= zs_parms.irq[chip];
+			uport->uartclk	= ZS_CLOCK;
+			uport->fifosize	= 1;
+			uport->iotype	= UPIO_MEM;
+			uport->flags	= UPF_BOOT_AUTOCONF;
+			uport->ops	= &zs_ops;
+			uport->line	= chip * ZS_NUM_CHAN + side;
+			uport->mapbase	= dec_kn_slot_base +
+					  zs_parms.scc[chip] +
+					  (side ^ ZS_CHAN_B) * ZS_CHAN_IO_SIZE;
+
+			for (i = 0; i < ZS_NUM_REGS; i++)
+				zport->regs[i] = zs_init_regs[i];
+		}
+	}
+
+	return 0;
+}
+
+
+#ifdef CONFIG_SERIAL_ZS_CONSOLE
+static void zs_console_putchar(struct uart_port *uport, int ch)
+{
+	struct zs_port *zport = to_zport(uport);
+	struct zs_scc *scc = zport->scc;
+	int irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&scc->zlock, flags);
+	irq = !irqs_disabled_flags(flags);
+	if (zs_transmit_drain(zport, irq))
+		write_zsdata(zport, ch);
+	spin_unlock_irqrestore(&scc->zlock, flags);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ */
+static void zs_console_write(struct console *co, const char *s,
+			     unsigned int count)
+{
+	int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN;
+	struct zs_port *zport = &zs_sccs[chip].zport[side];
+	struct zs_scc *scc = zport->scc;
+	unsigned long flags;
+	u8 txint, txenb;
+	int irq;
+
+	/* Disable transmit interrupts and enable the transmitter. */
+	spin_lock_irqsave(&scc->zlock, flags);
+	txint = zport->regs[1];
+	txenb = zport->regs[5];
+	if (txint & TxINT_ENAB) {
+		zport->regs[1] = txint & ~TxINT_ENAB;
+		write_zsreg(zport, R1, zport->regs[1]);
+	}
+	if (!(txenb & TxENAB)) {
+		zport->regs[5] = txenb | TxENAB;
+		write_zsreg(zport, R5, zport->regs[5]);
+	}
+	spin_unlock_irqrestore(&scc->zlock, flags);
+
+	uart_console_write(&zport->port, s, count, zs_console_putchar);
+
+	/* Restore transmit interrupts and the transmitter enable. */
+	spin_lock_irqsave(&scc->zlock, flags);
+	irq = !irqs_disabled_flags(flags);
+	zs_line_drain(zport, irq);
+	if (!(txenb & TxENAB)) {
+		zport->regs[5] &= ~TxENAB;
+		write_zsreg(zport, R5, zport->regs[5]);
+	}
+	if (txint & TxINT_ENAB) {
+		zport->regs[1] |= TxINT_ENAB;
+		write_zsreg(zport, R1, zport->regs[1]);
+	}
+	spin_unlock_irqrestore(&scc->zlock, flags);
+}
+
+/*
+ * Setup serial console baud/bits/parity.  We do two things here:
+ * - construct a cflag setting for the first uart_open()
+ * - initialise the serial port
+ * Return non-zero if we didn't find a serial port.
+ */
+static int __init zs_console_setup(struct console *co, char *options)
+{
+	int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN;
+	struct zs_port *zport = &zs_sccs[chip].zport[side];
+	struct uart_port *uport = &zport->port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+	int ret;
+
+	ret = zs_map_port(uport);
+	if (ret)
+		return ret;
+
+	zs_reset(zport);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	return uart_set_options(uport, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver zs_reg;
+static struct console zs_console = {
+	.name	= "ttyS",
+	.write	= zs_console_write,
+	.device	= uart_console_device,
+	.setup	= zs_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+	.data	= &zs_reg,
+};
+
+/*
+ *	Register console.
+ */
+static int __init zs_serial_console_init(void)
+{
+	int ret;
+
+	ret = zs_probe_sccs();
+	if (ret)
+		return ret;
+	register_console(&zs_console);
+
+	return 0;
+}
+
+console_initcall(zs_serial_console_init);
+
+#define SERIAL_ZS_CONSOLE	&zs_console
+#else
+#define SERIAL_ZS_CONSOLE	NULL
+#endif /* CONFIG_SERIAL_ZS_CONSOLE */
+
+static struct uart_driver zs_reg = {
+	.owner			= THIS_MODULE,
+	.driver_name		= "serial",
+	.dev_name		= "ttyS",
+	.major			= TTY_MAJOR,
+	.minor			= 64,
+	.nr			= ZS_NUM_SCCS * ZS_NUM_CHAN,
+	.cons			= SERIAL_ZS_CONSOLE,
+};
+
+/* zs_init inits the driver. */
+static int __init zs_init(void)
+{
+	int i, ret;
+
+	pr_info("%s%s\n", zs_name, zs_version);
+
+	/* Find out how many Z85C30 SCCs we have.  */
+	ret = zs_probe_sccs();
+	if (ret)
+		return ret;
+
+	ret = uart_register_driver(&zs_reg);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) {
+		struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN];
+		struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN];
+		struct uart_port *uport = &zport->port;
+
+		if (zport->scc)
+			uart_add_one_port(&zs_reg, uport);
+	}
+
+	return 0;
+}
+
+static void __exit zs_exit(void)
+{
+	int i;
+
+	for (i = ZS_NUM_SCCS * ZS_NUM_CHAN - 1; i >= 0; i--) {
+		struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN];
+		struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN];
+		struct uart_port *uport = &zport->port;
+
+		if (zport->scc)
+			uart_remove_one_port(&zs_reg, uport);
+	}
+
+	uart_unregister_driver(&zs_reg);
+}
+
+module_init(zs_init);
+module_exit(zs_exit);
diff --git a/drivers/serial/zs.h b/drivers/serial/zs.h
new file mode 100644
index 0000000..aa921b5
--- /dev/null
+++ b/drivers/serial/zs.h
@@ -0,0 +1,284 @@
+/*
+ * zs.h: Definitions for the DECstation Z85C30 serial driver.
+ *
+ * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras.
+ * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen.
+ *
+ * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2004, 2005, 2007  Maciej W. Rozycki
+ */
+#ifndef _SERIAL_ZS_H
+#define _SERIAL_ZS_H
+
+#ifdef __KERNEL__
+
+#define ZS_NUM_REGS 16
+
+/*
+ * This is our internal structure for each serial port's state.
+ */
+struct zs_port {
+	struct zs_scc	*scc;			/* Containing SCC.  */
+	struct uart_port port;			/* Underlying UART.  */
+
+	int		clk_mode;		/* May be 1, 16, 32, or 64.  */
+
+	unsigned int	tty_break;		/* Set on BREAK condition.  */
+	int		tx_stopped;		/* Output is suspended.  */
+
+	unsigned int	mctrl;			/* State of modem lines.  */
+	u8		brk;			/* BREAK state from RR0.  */
+
+	u8		regs[ZS_NUM_REGS];	/* Channel write registers.  */
+};
+
+/*
+ * Per-SCC state for locking and the interrupt handler.
+ */
+struct zs_scc {
+	struct zs_port	zport[2];
+	spinlock_t	zlock;
+	atomic_t	irq_guard;
+	int		initialised;
+};
+
+#endif /* __KERNEL__ */
+
+/*
+ * Conversion routines to/from brg time constants from/to bits per second.
+ */
+#define ZS_BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
+#define ZS_BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
+
+/*
+ * The Zilog register set.
+ */
+
+/* Write Register 0 (Command) */
+#define R0		0	/* Register selects */
+#define R1		1
+#define R2		2
+#define R3		3
+#define R4		4
+#define R5		5
+#define R6		6
+#define R7		7
+#define R8		8
+#define R9		9
+#define R10		10
+#define R11		11
+#define R12		12
+#define R13		13
+#define R14		14
+#define R15		15
+
+#define NULLCODE	0	/* Null Code */
+#define POINT_HIGH	0x8	/* Select upper half of registers */
+#define RES_EXT_INT	0x10	/* Reset Ext. Status Interrupts */
+#define SEND_ABORT	0x18	/* HDLC Abort */
+#define RES_RxINT_FC	0x20	/* Reset RxINT on First Character */
+#define RES_Tx_P	0x28	/* Reset TxINT Pending */
+#define ERR_RES		0x30	/* Error Reset */
+#define RES_H_IUS	0x38	/* Reset highest IUS */
+
+#define RES_Rx_CRC	0x40	/* Reset Rx CRC Checker */
+#define RES_Tx_CRC	0x80	/* Reset Tx CRC Checker */
+#define RES_EOM_L	0xC0	/* Reset EOM latch */
+
+/* Write Register 1 (Tx/Rx/Ext Int Enable and WAIT/DMA Commands) */
+#define EXT_INT_ENAB	0x1	/* Ext Int Enable */
+#define TxINT_ENAB	0x2	/* Tx Int Enable */
+#define PAR_SPEC	0x4	/* Parity is special condition */
+
+#define RxINT_DISAB	0	/* Rx Int Disable */
+#define RxINT_FCERR	0x8	/* Rx Int on First Character Only or Error */
+#define RxINT_ALL	0x10	/* Int on all Rx Characters or error */
+#define RxINT_ERR	0x18	/* Int on error only */
+#define RxINT_MASK	0x18
+
+#define WT_RDY_RT	0x20	/* Wait/Ready on R/T */
+#define WT_FN_RDYFN	0x40	/* Wait/FN/Ready FN */
+#define WT_RDY_ENAB	0x80	/* Wait/Ready Enable */
+
+/* Write Register 2 (Interrupt Vector) */
+
+/* Write Register 3 (Receive Parameters and Control) */
+#define RxENABLE	0x1	/* Rx Enable */
+#define SYNC_L_INH	0x2	/* Sync Character Load Inhibit */
+#define ADD_SM		0x4	/* Address Search Mode (SDLC) */
+#define RxCRC_ENAB	0x8	/* Rx CRC Enable */
+#define ENT_HM		0x10	/* Enter Hunt Mode */
+#define AUTO_ENAB	0x20	/* Auto Enables */
+#define Rx5		0x0	/* Rx 5 Bits/Character */
+#define Rx7		0x40	/* Rx 7 Bits/Character */
+#define Rx6		0x80	/* Rx 6 Bits/Character */
+#define Rx8		0xc0	/* Rx 8 Bits/Character */
+#define RxNBITS_MASK	0xc0
+
+/* Write Register 4 (Transmit/Receive Miscellaneous Parameters and Modes) */
+#define PAR_ENA		0x1	/* Parity Enable */
+#define PAR_EVEN	0x2	/* Parity Even/Odd* */
+
+#define SYNC_ENAB	0	/* Sync Modes Enable */
+#define SB1		0x4	/* 1 stop bit/char */
+#define SB15		0x8	/* 1.5 stop bits/char */
+#define SB2		0xc	/* 2 stop bits/char */
+#define SB_MASK		0xc
+
+#define MONSYNC		0	/* 8 Bit Sync character */
+#define BISYNC		0x10	/* 16 bit sync character */
+#define SDLC		0x20	/* SDLC Mode (01111110 Sync Flag) */
+#define EXTSYNC		0x30	/* External Sync Mode */
+
+#define X1CLK		0x0	/* x1 clock mode */
+#define X16CLK		0x40	/* x16 clock mode */
+#define X32CLK		0x80	/* x32 clock mode */
+#define X64CLK		0xc0	/* x64 clock mode */
+#define XCLK_MASK	0xc0
+
+/* Write Register 5 (Transmit Parameters and Controls) */
+#define TxCRC_ENAB	0x1	/* Tx CRC Enable */
+#define RTS		0x2	/* RTS */
+#define SDLC_CRC	0x4	/* SDLC/CRC-16 */
+#define TxENAB		0x8	/* Tx Enable */
+#define SND_BRK		0x10	/* Send Break */
+#define Tx5		0x0	/* Tx 5 bits (or less)/character */
+#define Tx7		0x20	/* Tx 7 bits/character */
+#define Tx6		0x40	/* Tx 6 bits/character */
+#define Tx8		0x60	/* Tx 8 bits/character */
+#define TxNBITS_MASK	0x60
+#define DTR		0x80	/* DTR */
+
+/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
+
+/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
+
+/* Write Register 8 (Transmit Buffer) */
+
+/* Write Register 9 (Master Interrupt Control) */
+#define VIS		1	/* Vector Includes Status */
+#define NV		2	/* No Vector */
+#define DLC		4	/* Disable Lower Chain */
+#define MIE		8	/* Master Interrupt Enable */
+#define STATHI		0x10	/* Status high */
+#define SOFTACK		0x20	/* Software Interrupt Acknowledge */
+#define NORESET		0	/* No reset on write to R9 */
+#define CHRB		0x40	/* Reset channel B */
+#define CHRA		0x80	/* Reset channel A */
+#define FHWRES		0xc0	/* Force hardware reset */
+
+/* Write Register 10 (Miscellaneous Transmitter/Receiver Control Bits) */
+#define BIT6		1	/* 6 bit/8bit sync */
+#define LOOPMODE	2	/* SDLC Loop mode */
+#define ABUNDER		4	/* Abort/flag on SDLC xmit underrun */
+#define MARKIDLE	8	/* Mark/flag on idle */
+#define GAOP		0x10	/* Go active on poll */
+#define NRZ		0	/* NRZ mode */
+#define NRZI		0x20	/* NRZI mode */
+#define FM1		0x40	/* FM1 (transition = 1) */
+#define FM0		0x60	/* FM0 (transition = 0) */
+#define CRCPS		0x80	/* CRC Preset I/O */
+
+/* Write Register 11 (Clock Mode Control) */
+#define TRxCXT		0	/* TRxC = Xtal output */
+#define TRxCTC		1	/* TRxC = Transmit clock */
+#define TRxCBR		2	/* TRxC = BR Generator Output */
+#define TRxCDP		3	/* TRxC = DPLL output */
+#define TRxCOI		4	/* TRxC O/I */
+#define TCRTxCP		0	/* Transmit clock = RTxC pin */
+#define TCTRxCP		8	/* Transmit clock = TRxC pin */
+#define TCBR		0x10	/* Transmit clock = BR Generator output */
+#define TCDPLL		0x18	/* Transmit clock = DPLL output */
+#define RCRTxCP		0	/* Receive clock = RTxC pin */
+#define RCTRxCP		0x20	/* Receive clock = TRxC pin */
+#define RCBR		0x40	/* Receive clock = BR Generator output */
+#define RCDPLL		0x60	/* Receive clock = DPLL output */
+#define RTxCX		0x80	/* RTxC Xtal/No Xtal */
+
+/* Write Register 12 (Lower Byte of Baud Rate Generator Time Constant) */
+
+/* Write Register 13 (Upper Byte of Baud Rate Generator Time Constant) */
+
+/* Write Register 14 (Miscellaneous Control Bits) */
+#define BRENABL		1	/* Baud rate generator enable */
+#define BRSRC		2	/* Baud rate generator source */
+#define DTRREQ		4	/* DTR/Request function */
+#define AUTOECHO	8	/* Auto Echo */
+#define LOOPBAK		0x10	/* Local loopback */
+#define SEARCH		0x20	/* Enter search mode */
+#define RMC		0x40	/* Reset missing clock */
+#define DISDPLL		0x60	/* Disable DPLL */
+#define SSBR		0x80	/* Set DPLL source = BR generator */
+#define SSRTxC		0xa0	/* Set DPLL source = RTxC */
+#define SFMM		0xc0	/* Set FM mode */
+#define SNRZI		0xe0	/* Set NRZI mode */
+
+/* Write Register 15 (External/Status Interrupt Control) */
+#define WR7P_EN		1	/* WR7 Prime SDLC Feature Enable */
+#define ZCIE		2	/* Zero count IE */
+#define DCDIE		8	/* DCD IE */
+#define SYNCIE		0x10	/* Sync/hunt IE */
+#define CTSIE		0x20	/* CTS IE */
+#define TxUIE		0x40	/* Tx Underrun/EOM IE */
+#define BRKIE		0x80	/* Break/Abort IE */
+
+
+/* Read Register 0 (Transmit/Receive Buffer Status and External Status) */
+#define Rx_CH_AV	0x1	/* Rx Character Available */
+#define ZCOUNT		0x2	/* Zero count */
+#define Tx_BUF_EMP	0x4	/* Tx Buffer empty */
+#define DCD		0x8	/* DCD */
+#define SYNC_HUNT	0x10	/* Sync/hunt */
+#define CTS		0x20	/* CTS */
+#define TxEOM		0x40	/* Tx underrun */
+#define BRK_ABRT	0x80	/* Break/Abort */
+
+/* Read Register 1 (Special Receive Condition Status) */
+#define ALL_SNT		0x1	/* All sent */
+/* Residue Data for 8 Rx bits/char programmed */
+#define RES3		0x8	/* 0/3 */
+#define RES4		0x4	/* 0/4 */
+#define RES5		0xc	/* 0/5 */
+#define RES6		0x2	/* 0/6 */
+#define RES7		0xa	/* 0/7 */
+#define RES8		0x6	/* 0/8 */
+#define RES18		0xe	/* 1/8 */
+#define RES28		0x0	/* 2/8 */
+/* Special Rx Condition Interrupts */
+#define PAR_ERR		0x10	/* Parity Error */
+#define Rx_OVR		0x20	/* Rx Overrun Error */
+#define FRM_ERR		0x40	/* CRC/Framing Error */
+#define END_FR		0x80	/* End of Frame (SDLC) */
+
+/* Read Register 2 (Interrupt Vector (WR2) -- channel A).  */
+
+/* Read Register 2 (Modified Interrupt Vector -- channel B).  */
+
+/* Read Register 3 (Interrupt Pending Bits -- channel A only).  */
+#define CHBEXT		0x1	/* Channel B Ext/Stat IP */
+#define CHBTxIP		0x2	/* Channel B Tx IP */
+#define CHBRxIP		0x4	/* Channel B Rx IP */
+#define CHAEXT		0x8	/* Channel A Ext/Stat IP */
+#define CHATxIP		0x10	/* Channel A Tx IP */
+#define CHARxIP		0x20	/* Channel A Rx IP */
+
+/* Read Register 6 (SDLC FIFO Status and Byte Count LSB) */
+
+/* Read Register 7 (SDLC FIFO Status and Byte Count MSB) */
+
+/* Read Register 8 (Receive Data) */
+
+/* Read Register 10 (Miscellaneous Status Bits) */
+#define ONLOOP		2	/* On loop */
+#define LOOPSEND	0x10	/* Loop sending */
+#define CLK2MIS		0x40	/* Two clocks missing */
+#define CLK1MIS		0x80	/* One clock missing */
+
+/* Read Register 12 (Lower Byte of Baud Rate Generator Constant (WR12)) */
+
+/* Read Register 13 (Upper Byte of Baud Rate Generator Constant (WR13) */
+
+/* Read Register 15 (External/Status Interrupt Control (WR15)) */
+
+#endif /* _SERIAL_ZS_H */
diff --git a/drivers/tc/Makefile b/drivers/tc/Makefile
index 9673426..c899246 100644
--- a/drivers/tc/Makefile
+++ b/drivers/tc/Makefile
@@ -5,7 +5,6 @@
 # Object file lists.
 
 obj-$(CONFIG_TC) += tc.o tc-driver.o
-obj-$(CONFIG_ZS) += zs.o
 obj-$(CONFIG_VT) += lk201.o lk201-map.o lk201-remap.o
 
 $(obj)/lk201-map.o: $(obj)/lk201-map.c
diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c
deleted file mode 100644
index ed979f1..0000000
--- a/drivers/tc/zs.c
+++ /dev/null
@@ -1,2203 +0,0 @@
-/*
- * decserial.c: Serial port driver for IOASIC DECstations.
- *
- * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras.
- * Derived from drivers/macintosh/macserial.c by Harald Koerfgen.
- *
- * DECstation changes
- * Copyright (C) 1998-2000 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005  Maciej W. Rozycki
- *
- * For the rest of the code the original Copyright applies:
- * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- *
- * Note: for IOASIC systems the wiring is as follows:
- *
- * mouse/keyboard:
- * DIN-7 MJ-4  signal        SCC
- * 2     1     TxD       <-  A.TxD
- * 3     4     RxD       ->  A.RxD
- *
- * EIA-232/EIA-423:
- * DB-25 MMJ-6 signal        SCC
- * 2     2     TxD       <-  B.TxD
- * 3     5     RxD       ->  B.RxD
- * 4           RTS       <- ~A.RTS
- * 5           CTS       -> ~B.CTS
- * 6     6     DSR       -> ~A.SYNC
- * 8           CD        -> ~B.DCD
- * 12          DSRS(DCE) -> ~A.CTS  (*)
- * 15          TxC       ->  B.TxC
- * 17          RxC       ->  B.RxC
- * 20    1     DTR       <- ~A.DTR
- * 22          RI        -> ~A.DCD
- * 23          DSRS(DTE) <- ~B.RTS
- *
- * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE)
- *     is shared with DSRS(DTE) at pin 23.
- */
-
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#ifdef CONFIG_SERIAL_DEC_CONSOLE
-#include <linux/console.h>
-#endif
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/bootinfo.h>
-
-#include <asm/dec/interrupts.h>
-#include <asm/dec/ioasic_addrs.h>
-#include <asm/dec/machtype.h>
-#include <asm/dec/serial.h>
-#include <asm/dec/system.h>
-
-#ifdef CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-#ifdef CONFIG_MAGIC_SYSRQ
-#include <linux/sysrq.h>
-#endif
-
-#include "zs.h"
-
-/*
- * It would be nice to dynamically allocate everything that
- * depends on NUM_SERIAL, so we could support any number of
- * Z8530s, but for now...
- */
-#define NUM_SERIAL	2		/* Max number of ZS chips supported */
-#define NUM_CHANNELS	(NUM_SERIAL * 2)	/* 2 channels per chip */
-#define CHANNEL_A_NR  (zs_parms->channel_a_offset > zs_parms->channel_b_offset)
-                                        /* Number of channel A in the chip */
-#define ZS_CHAN_IO_SIZE 8
-#define ZS_CLOCK        7372800 	/* Z8530 RTxC input clock rate */
-
-#define RECOVERY_DELAY  udelay(2)
-
-struct zs_parms {
-	unsigned long scc0;
-	unsigned long scc1;
-	int channel_a_offset;
-	int channel_b_offset;
-	int irq0;
-	int irq1;
-	int clock;
-};
-
-static struct zs_parms *zs_parms;
-
-#ifdef CONFIG_MACH_DECSTATION
-static struct zs_parms ds_parms = {
-	scc0 : IOASIC_SCC0,
-	scc1 : IOASIC_SCC1,
-	channel_a_offset : 1,
-	channel_b_offset : 9,
-	irq0 : -1,
-	irq1 : -1,
-	clock : ZS_CLOCK
-};
-#endif
-
-#ifdef CONFIG_MACH_DECSTATION
-#define DS_BUS_PRESENT (IOASIC)
-#else
-#define DS_BUS_PRESENT 0
-#endif
-
-#define BUS_PRESENT (DS_BUS_PRESENT)
-
-DEFINE_SPINLOCK(zs_lock);
-
-struct dec_zschannel zs_channels[NUM_CHANNELS];
-struct dec_serial zs_soft[NUM_CHANNELS];
-int zs_channels_found;
-struct dec_serial *zs_chain;	/* list of all channels */
-
-struct tty_struct zs_ttys[NUM_CHANNELS];
-
-#ifdef CONFIG_SERIAL_DEC_CONSOLE
-static struct console zs_console;
-#endif
-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-   !defined(MODULE)
-static unsigned long break_pressed; /* break, really ... */
-#endif
-
-static unsigned char zs_init_regs[16] __initdata = {
-	0,				/* write 0 */
-	0,				/* write 1 */
-	0,				/* write 2 */
-	0,				/* write 3 */
-	(X16CLK),			/* write 4 */
-	0,				/* write 5 */
-	0, 0, 0,			/* write 6, 7, 8 */
-	(MIE | DLC | NV),		/* write 9 */
-	(NRZ),				/* write 10 */
-	(TCBR | RCBR),			/* write 11 */
-	0, 0,				/* BRG time constant, write 12 + 13 */
-	(BRSRC | BRENABL),		/* write 14 */
-	0				/* write 15 */
-};
-
-static struct tty_driver *serial_driver;
-
-/* serial subtype definitions */
-#define SERIAL_TYPE_NORMAL	1
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/*
- * Debugging.
- */
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-#undef SERIAL_DEBUG_THROTTLE
-#undef SERIAL_PARANOIA_CHECK
-
-#undef ZS_DEBUG_REGS
-
-#ifdef SERIAL_DEBUG_THROTTLE
-#define _tty_name(tty,buf) tty_name(tty,buf)
-#endif
-
-#define RS_STROBE_TIME 10
-#define RS_ISR_PASS_LIMIT 256
-
-static void probe_sccs(void);
-static void change_speed(struct dec_serial *info);
-static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-
-static inline int serial_paranoia_check(struct dec_serial *info,
-					char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
-	static const char *badmagic =
-		"Warning: bad magic number for serial struct %s in %s\n";
-	static const char *badinfo =
-		"Warning: null mac_serial for %s in %s\n";
-
-	if (!info) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (info->magic != SERIAL_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-/*
- * This is used to figure out the divisor speeds and the timeouts
- */
-static int baud_table[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 0 };
-
-/*
- * Reading and writing Z8530 registers.
- */
-static inline unsigned char read_zsreg(struct dec_zschannel *channel,
-				       unsigned char reg)
-{
-	unsigned char retval;
-
-	if (reg != 0) {
-		*channel->control = reg & 0xf;
-		fast_iob(); RECOVERY_DELAY;
-	}
-	retval = *channel->control;
-	RECOVERY_DELAY;
-	return retval;
-}
-
-static inline void write_zsreg(struct dec_zschannel *channel,
-			       unsigned char reg, unsigned char value)
-{
-	if (reg != 0) {
-		*channel->control = reg & 0xf;
-		fast_iob(); RECOVERY_DELAY;
-	}
-	*channel->control = value;
-	fast_iob(); RECOVERY_DELAY;
-	return;
-}
-
-static inline unsigned char read_zsdata(struct dec_zschannel *channel)
-{
-	unsigned char retval;
-
-	retval = *channel->data;
-	RECOVERY_DELAY;
-	return retval;
-}
-
-static inline void write_zsdata(struct dec_zschannel *channel,
-				unsigned char value)
-{
-	*channel->data = value;
-	fast_iob(); RECOVERY_DELAY;
-	return;
-}
-
-static inline void load_zsregs(struct dec_zschannel *channel,
-			       unsigned char *regs)
-{
-/*	ZS_CLEARERR(channel);
-	ZS_CLEARFIFO(channel); */
-	/* Load 'em up */
-	write_zsreg(channel, R3, regs[R3] & ~RxENABLE);
-	write_zsreg(channel, R5, regs[R5] & ~TxENAB);
-	write_zsreg(channel, R4, regs[R4]);
-	write_zsreg(channel, R9, regs[R9]);
-	write_zsreg(channel, R1, regs[R1]);
-	write_zsreg(channel, R2, regs[R2]);
-	write_zsreg(channel, R10, regs[R10]);
-	write_zsreg(channel, R11, regs[R11]);
-	write_zsreg(channel, R12, regs[R12]);
-	write_zsreg(channel, R13, regs[R13]);
-	write_zsreg(channel, R14, regs[R14]);
-	write_zsreg(channel, R15, regs[R15]);
-	write_zsreg(channel, R3, regs[R3]);
-	write_zsreg(channel, R5, regs[R5]);
-	return;
-}
-
-/* Sets or clears DTR/RTS on the requested line */
-static inline void zs_rtsdtr(struct dec_serial *info, int which, int set)
-{
-        unsigned long flags;
-
-	spin_lock_irqsave(&zs_lock, flags);
-	if (info->zs_channel != info->zs_chan_a) {
-		if (set) {
-			info->zs_chan_a->curregs[5] |= (which & (RTS | DTR));
-		} else {
-			info->zs_chan_a->curregs[5] &= ~(which & (RTS | DTR));
-		}
-		write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]);
-	}
-	spin_unlock_irqrestore(&zs_lock, flags);
-}
-
-/* Utility routines for the Zilog */
-static inline int get_zsbaud(struct dec_serial *ss)
-{
-	struct dec_zschannel *channel = ss->zs_channel;
-	int brg;
-
-	/* The baud rate is split up between two 8-bit registers in
-	 * what is termed 'BRG time constant' format in my docs for
-	 * the chip, it is a function of the clk rate the chip is
-	 * receiving which happens to be constant.
-	 */
-	brg = (read_zsreg(channel, 13) << 8);
-	brg |= read_zsreg(channel, 12);
-	return BRG_TO_BPS(brg, (zs_parms->clock/(ss->clk_divisor)));
-}
-
-/* On receive, this clears errors and the receiver interrupts */
-static inline void rs_recv_clear(struct dec_zschannel *zsc)
-{
-	write_zsreg(zsc, 0, ERR_RES);
-	write_zsreg(zsc, 0, RES_H_IUS); /* XXX this is unnecessary */
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines.  All of the following
- * subroutines are declared as inline and are folded into
- * rs_interrupt().  They were separated out for readability's sake.
- *
- * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver.
- */
-static void rs_sched_event(struct dec_serial *info, int event)
-{
-	info->event |= 1 << event;
-	tasklet_schedule(&info->tlet);
-}
-
-static void receive_chars(struct dec_serial *info)
-{
-	struct tty_struct *tty = info->tty;
-	unsigned char ch, stat, flag;
-
-	while ((read_zsreg(info->zs_channel, R0) & Rx_CH_AV) != 0) {
-
-		stat = read_zsreg(info->zs_channel, R1);
-		ch = read_zsdata(info->zs_channel);
-
-		if (!tty && (!info->hook || !info->hook->rx_char))
-			continue;
-
-		flag = TTY_NORMAL;
-		if (info->tty_break) {
-			info->tty_break = 0;
-			flag = TTY_BREAK;
-			if (info->flags & ZILOG_SAK)
-				do_SAK(tty);
-			/* Ignore the null char got when BREAK is removed.  */
-			if (ch == 0)
-				continue;
-		} else {
-			if (stat & Rx_OVR) {
-				flag = TTY_OVERRUN;
-			} else if (stat & FRM_ERR) {
-				flag = TTY_FRAME;
-			} else if (stat & PAR_ERR) {
-				flag = TTY_PARITY;
-			}
-			if (flag != TTY_NORMAL)
-				/* reset the error indication */
-				write_zsreg(info->zs_channel, R0, ERR_RES);
-		}
-
-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-   !defined(MODULE)
-		if (break_pressed && info->line == zs_console.index) {
-			/* Ignore the null char got when BREAK is removed.  */
-			if (ch == 0)
-				continue;
-			if (time_before(jiffies, break_pressed + HZ * 5)) {
-				handle_sysrq(ch, NULL);
-				break_pressed = 0;
-				continue;
-			}
-			break_pressed = 0;
-		}
-#endif
-
-		if (info->hook && info->hook->rx_char) {
-			(*info->hook->rx_char)(ch, flag);
-			return;
-  		}
-
-		tty_insert_flip_char(tty, ch, flag);
-	}
-	if (tty)
-		tty_flip_buffer_push(tty);
-}
-
-static void transmit_chars(struct dec_serial *info)
-{
-	if ((read_zsreg(info->zs_channel, R0) & Tx_BUF_EMP) == 0)
-		return;
-	info->tx_active = 0;
-
-	if (info->x_char) {
-		/* Send next char */
-		write_zsdata(info->zs_channel, info->x_char);
-		info->x_char = 0;
-		info->tx_active = 1;
-		return;
-	}
-
-	if ((info->xmit_cnt <= 0) || (info->tty && info->tty->stopped)
-	    || info->tx_stopped) {
-		write_zsreg(info->zs_channel, R0, RES_Tx_P);
-		return;
-	}
-	/* Send char */
-	write_zsdata(info->zs_channel, info->xmit_buf[info->xmit_tail++]);
-	info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-	info->xmit_cnt--;
-	info->tx_active = 1;
-
-	if (info->xmit_cnt < WAKEUP_CHARS)
-		rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-}
-
-static void status_handle(struct dec_serial *info)
-{
-	unsigned char stat;
-
-	/* Get status from Read Register 0 */
-	stat = read_zsreg(info->zs_channel, R0);
-
-	if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) {
-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-   !defined(MODULE)
-		if (info->line == zs_console.index) {
-			if (!break_pressed)
-				break_pressed = jiffies;
-		} else
-#endif
-			info->tty_break = 1;
-	}
-
-	if (info->zs_channel != info->zs_chan_a) {
-
-		/* Check for DCD transitions */
-		if (info->tty && !C_CLOCAL(info->tty) &&
-		    ((stat ^ info->read_reg_zero) & DCD) != 0 ) {
-			if (stat & DCD) {
-				wake_up_interruptible(&info->open_wait);
-			} else {
-				tty_hangup(info->tty);
-			}
-		}
-
-		/* Check for CTS transitions */
-		if (info->tty && C_CRTSCTS(info->tty)) {
-			if ((stat & CTS) != 0) {
-				if (info->tx_stopped) {
-					info->tx_stopped = 0;
-					if (!info->tx_active)
-						transmit_chars(info);
-				}
-			} else {
-				info->tx_stopped = 1;
-			}
-		}
-
-	}
-
-	/* Clear status condition... */
-	write_zsreg(info->zs_channel, R0, RES_EXT_INT);
-	info->read_reg_zero = stat;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-static irqreturn_t rs_interrupt(int irq, void *dev_id)
-{
-	struct dec_serial *info = (struct dec_serial *) dev_id;
-	irqreturn_t status = IRQ_NONE;
-	unsigned char zs_intreg;
-	int shift;
-
-	/* NOTE: The read register 3, which holds the irq status,
-	 *       does so for both channels on each chip.  Although
-	 *       the status value itself must be read from the A
-	 *       channel and is only valid when read from channel A.
-	 *       Yes... broken hardware...
-	 */
-#define CHAN_IRQMASK (CHBRxIP | CHBTxIP | CHBEXT)
-
-	if (info->zs_chan_a == info->zs_channel)
-		shift = 3;	/* Channel A */
-	else
-		shift = 0;	/* Channel B */
-
-	for (;;) {
-		zs_intreg = read_zsreg(info->zs_chan_a, R3) >> shift;
-		if ((zs_intreg & CHAN_IRQMASK) == 0)
-			break;
-
-		status = IRQ_HANDLED;
-
-		if (zs_intreg & CHBRxIP) {
-			receive_chars(info);
-		}
-		if (zs_intreg & CHBTxIP) {
-			transmit_chars(info);
-		}
-		if (zs_intreg & CHBEXT) {
-			status_handle(info);
-		}
-	}
-
-	/* Why do we need this ? */
-	write_zsreg(info->zs_channel, 0, RES_H_IUS);
-
-	return status;
-}
-
-#ifdef ZS_DEBUG_REGS
-void zs_dump (void) {
-	int i, j;
-	for (i = 0; i < zs_channels_found; i++) {
-		struct dec_zschannel *ch = &zs_channels[i];
-		if ((long)ch->control == UNI_IO_BASE+UNI_SCC1A_CTRL) {
-			for (j = 0; j < 15; j++) {
-				printk("W%d = 0x%x\t",
-				       j, (int)ch->curregs[j]);
-			}
-			for (j = 0; j < 15; j++) {
-				printk("R%d = 0x%x\t",
-				       j, (int)read_zsreg(ch,j));
-			}
-			printk("\n\n");
-		}
-	}
-}
-#endif
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * ------------------------------------------------------------
- */
-static void rs_stop(struct tty_struct *tty)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-	unsigned long flags;
-
-	if (serial_paranoia_check(info, tty->name, "rs_stop"))
-		return;
-
-#if 1
-	spin_lock_irqsave(&zs_lock, flags);
-	if (info->zs_channel->curregs[5] & TxENAB) {
-		info->zs_channel->curregs[5] &= ~TxENAB;
-		write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
-	}
-	spin_unlock_irqrestore(&zs_lock, flags);
-#endif
-}
-
-static void rs_start(struct tty_struct *tty)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-	unsigned long flags;
-
-	if (serial_paranoia_check(info, tty->name, "rs_start"))
-		return;
-
-	spin_lock_irqsave(&zs_lock, flags);
-#if 1
-	if (info->xmit_cnt && info->xmit_buf && !(info->zs_channel->curregs[5] & TxENAB)) {
-		info->zs_channel->curregs[5] |= TxENAB;
-		write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
-	}
-#else
-	if (info->xmit_cnt && info->xmit_buf && !info->tx_active) {
-		transmit_chars(info);
-	}
-#endif
-	spin_unlock_irqrestore(&zs_lock, flags);
-}
-
-/*
- * This routine is used to handle the "bottom half" processing for the
- * serial driver, known also the "software interrupt" processing.
- * This processing is done at the kernel interrupt level, after the
- * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON.  This
- * is where time-consuming activities which can not be done in the
- * interrupt driver proper are done; the interrupt driver schedules
- * them using rs_sched_event(), and they get done here.
- */
-
-static void do_softint(unsigned long private_)
-{
-	struct dec_serial	*info = (struct dec_serial *) private_;
-	struct tty_struct	*tty;
-
-	tty = info->tty;
-	if (!tty)
-		return;
-
-	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
-		tty_wakeup(tty);
-}
-
-static int zs_startup(struct dec_serial * info)
-{
-	unsigned long flags;
-
-	if (info->flags & ZILOG_INITIALIZED)
-		return 0;
-
-	if (!info->xmit_buf) {
-		info->xmit_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL);
-		if (!info->xmit_buf)
-			return -ENOMEM;
-	}
-
-	spin_lock_irqsave(&zs_lock, flags);
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("starting up ttyS%d (irq %d)...", info->line, info->irq);
-#endif
-
-	/*
-	 * Clear the receive FIFO.
-	 */
-	ZS_CLEARFIFO(info->zs_channel);
-	info->xmit_fifo_size = 1;
-
-	/*
-	 * Clear the interrupt registers.
-	 */
-	write_zsreg(info->zs_channel, R0, ERR_RES);
-	write_zsreg(info->zs_channel, R0, RES_H_IUS);
-
-	/*
-	 * Set the speed of the serial port
-	 */
-	change_speed(info);
-
-	/*
-	 * Turn on RTS and DTR.
-	 */
-	zs_rtsdtr(info, RTS | DTR, 1);
-
-	/*
-	 * Finally, enable sequencing and interrupts
-	 */
-	info->zs_channel->curregs[R1] &= ~RxINT_MASK;
-	info->zs_channel->curregs[R1] |= (RxINT_ALL | TxINT_ENAB |
-					  EXT_INT_ENAB);
-	info->zs_channel->curregs[R3] |= RxENABLE;
-	info->zs_channel->curregs[R5] |= TxENAB;
-	info->zs_channel->curregs[R15] |= (DCDIE | CTSIE | TxUIE | BRKIE);
-	write_zsreg(info->zs_channel, R1, info->zs_channel->curregs[R1]);
-	write_zsreg(info->zs_channel, R3, info->zs_channel->curregs[R3]);
-	write_zsreg(info->zs_channel, R5, info->zs_channel->curregs[R5]);
-	write_zsreg(info->zs_channel, R15, info->zs_channel->curregs[R15]);
-
-	/*
-	 * And clear the interrupt registers again for luck.
-	 */
-	write_zsreg(info->zs_channel, R0, ERR_RES);
-	write_zsreg(info->zs_channel, R0, RES_H_IUS);
-
-	/* Save the current value of RR0 */
-	info->read_reg_zero = read_zsreg(info->zs_channel, R0);
-
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
-	info->flags |= ZILOG_INITIALIZED;
-	spin_unlock_irqrestore(&zs_lock, flags);
-	return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct dec_serial * info)
-{
-	unsigned long	flags;
-
-	if (!(info->flags & ZILOG_INITIALIZED))
-		return;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("Shutting down serial port %d (irq %d)....", info->line,
-	       info->irq);
-#endif
-
-	spin_lock_irqsave(&zs_lock, flags);
-
-	if (info->xmit_buf) {
-		free_page((unsigned long) info->xmit_buf);
-		info->xmit_buf = 0;
-	}
-
-	info->zs_channel->curregs[1] = 0;
-	write_zsreg(info->zs_channel, 1, info->zs_channel->curregs[1]);	/* no interrupts */
-
-	info->zs_channel->curregs[3] &= ~RxENABLE;
-	write_zsreg(info->zs_channel, 3, info->zs_channel->curregs[3]);
-
-	info->zs_channel->curregs[5] &= ~TxENAB;
-	write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
-	if (!info->tty || C_HUPCL(info->tty)) {
-		zs_rtsdtr(info, RTS | DTR, 0);
-	}
-
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
-
-	info->flags &= ~ZILOG_INITIALIZED;
-	spin_unlock_irqrestore(&zs_lock, flags);
-}
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void change_speed(struct dec_serial *info)
-{
-	unsigned cflag;
-	int	i;
-	int	brg, bits;
-	unsigned long flags;
-
-	if (!info->hook) {
-		if (!info->tty || !info->tty->termios)
-			return;
-		cflag = info->tty->termios->c_cflag;
-		if (!info->port)
-			return;
-	} else {
-		cflag = info->hook->cflags;
-	}
-
-	i = cflag & CBAUD;
-	if (i & CBAUDEX) {
-		i &= ~CBAUDEX;
-		if (i < 1 || i > 2) {
-			if (!info->hook)
-				info->tty->termios->c_cflag &= ~CBAUDEX;
-			else
-				info->hook->cflags &= ~CBAUDEX;
-		} else
-			i += 15;
-	}
-
-	spin_lock_irqsave(&zs_lock, flags);
-	info->zs_baud = baud_table[i];
-	if (info->zs_baud) {
-		brg = BPS_TO_BRG(info->zs_baud, zs_parms->clock/info->clk_divisor);
-		info->zs_channel->curregs[12] = (brg & 255);
-		info->zs_channel->curregs[13] = ((brg >> 8) & 255);
-		zs_rtsdtr(info, DTR, 1);
-	} else {
-		zs_rtsdtr(info, RTS | DTR, 0);
-		return;
-	}
-
-	/* byte size and parity */
-	info->zs_channel->curregs[3] &= ~RxNBITS_MASK;
-	info->zs_channel->curregs[5] &= ~TxNBITS_MASK;
-	switch (cflag & CSIZE) {
-	case CS5:
-		bits = 7;
-		info->zs_channel->curregs[3] |= Rx5;
-		info->zs_channel->curregs[5] |= Tx5;
-		break;
-	case CS6:
-		bits = 8;
-		info->zs_channel->curregs[3] |= Rx6;
-		info->zs_channel->curregs[5] |= Tx6;
-		break;
-	case CS7:
-		bits = 9;
-		info->zs_channel->curregs[3] |= Rx7;
-		info->zs_channel->curregs[5] |= Tx7;
-		break;
-	case CS8:
-	default: /* defaults to 8 bits */
-		bits = 10;
-		info->zs_channel->curregs[3] |= Rx8;
-		info->zs_channel->curregs[5] |= Tx8;
-		break;
-	}
-
-	info->timeout = ((info->xmit_fifo_size*HZ*bits) / info->zs_baud);
-        info->timeout += HZ/50;         /* Add .02 seconds of slop */
-
-	info->zs_channel->curregs[4] &= ~(SB_MASK | PAR_ENA | PAR_EVEN);
-	if (cflag & CSTOPB) {
-		info->zs_channel->curregs[4] |= SB2;
-	} else {
-		info->zs_channel->curregs[4] |= SB1;
-	}
-	if (cflag & PARENB) {
-		info->zs_channel->curregs[4] |= PAR_ENA;
-	}
-	if (!(cflag & PARODD)) {
-		info->zs_channel->curregs[4] |= PAR_EVEN;
-	}
-
-	if (!(cflag & CLOCAL)) {
-		if (!(info->zs_channel->curregs[15] & DCDIE))
-			info->read_reg_zero = read_zsreg(info->zs_channel, 0);
-		info->zs_channel->curregs[15] |= DCDIE;
-	} else
-		info->zs_channel->curregs[15] &= ~DCDIE;
-	if (cflag & CRTSCTS) {
-		info->zs_channel->curregs[15] |= CTSIE;
-		if ((read_zsreg(info->zs_channel, 0) & CTS) == 0)
-			info->tx_stopped = 1;
-	} else {
-		info->zs_channel->curregs[15] &= ~CTSIE;
-		info->tx_stopped = 0;
-	}
-
-	/* Load up the new values */
-	load_zsregs(info->zs_channel, info->zs_channel->curregs);
-
-	spin_unlock_irqrestore(&zs_lock, flags);
-}
-
-static void rs_flush_chars(struct tty_struct *tty)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-	unsigned long flags;
-
-	if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
-		return;
-
-	if (info->xmit_cnt <= 0 || tty->stopped || info->tx_stopped ||
-	    !info->xmit_buf)
-		return;
-
-	/* Enable transmitter */
-	spin_lock_irqsave(&zs_lock, flags);
-	transmit_chars(info);
-	spin_unlock_irqrestore(&zs_lock, flags);
-}
-
-static int rs_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	int	c, total = 0;
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-	unsigned long flags;
-
-	if (serial_paranoia_check(info, tty->name, "rs_write"))
-		return 0;
-
-	if (!tty || !info->xmit_buf)
-		return 0;
-
-	while (1) {
-		spin_lock_irqsave(&zs_lock, flags);
-		c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-				   SERIAL_XMIT_SIZE - info->xmit_head));
-		if (c <= 0)
-			break;
-
-		memcpy(info->xmit_buf + info->xmit_head, buf, c);
-		info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
-		info->xmit_cnt += c;
-		spin_unlock_irqrestore(&zs_lock, flags);
-		buf += c;
-		count -= c;
-		total += c;
-	}
-
-	if (info->xmit_cnt && !tty->stopped && !info->tx_stopped
-	    && !info->tx_active)
-		transmit_chars(info);
-	spin_unlock_irqrestore(&zs_lock, flags);
-	return total;
-}
-
-static int rs_write_room(struct tty_struct *tty)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-	int	ret;
-
-	if (serial_paranoia_check(info, tty->name, "rs_write_room"))
-		return 0;
-	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-	return ret;
-}
-
-static int rs_chars_in_buffer(struct tty_struct *tty)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
-		return 0;
-	return info->xmit_cnt;
-}
-
-static void rs_flush_buffer(struct tty_struct *tty)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
-		return;
-	spin_lock_irq(&zs_lock);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-	spin_unlock_irq(&zs_lock);
-	tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_throttle(struct tty_struct * tty)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-	unsigned long flags;
-
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-
-	printk("throttle %s: %d....\n", _tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_throttle"))
-		return;
-
-	if (I_IXOFF(tty)) {
-		spin_lock_irqsave(&zs_lock, flags);
-		info->x_char = STOP_CHAR(tty);
-		if (!info->tx_active)
-			transmit_chars(info);
-		spin_unlock_irqrestore(&zs_lock, flags);
-	}
-
-	if (C_CRTSCTS(tty)) {
-		zs_rtsdtr(info, RTS, 0);
-	}
-}
-
-static void rs_unthrottle(struct tty_struct * tty)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-	unsigned long flags;
-
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-
-	printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
-		return;
-
-	if (I_IXOFF(tty)) {
-		spin_lock_irqsave(&zs_lock, flags);
-		if (info->x_char)
-			info->x_char = 0;
-		else {
-			info->x_char = START_CHAR(tty);
-			if (!info->tx_active)
-				transmit_chars(info);
-		}
-		spin_unlock_irqrestore(&zs_lock, flags);
-	}
-
-	if (C_CRTSCTS(tty)) {
-		zs_rtsdtr(info, RTS, 1);
-	}
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct dec_serial * info,
-			   struct serial_struct * retinfo)
-{
-	struct serial_struct tmp;
-
-	if (!retinfo)
-		return -EFAULT;
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = info->type;
-	tmp.line = info->line;
-	tmp.port = info->port;
-	tmp.irq = info->irq;
-	tmp.flags = info->flags;
-	tmp.baud_base = info->baud_base;
-	tmp.close_delay = info->close_delay;
-	tmp.closing_wait = info->closing_wait;
-	tmp.custom_divisor = info->custom_divisor;
-	return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0;
-}
-
-static int set_serial_info(struct dec_serial * info,
-			   struct serial_struct * new_info)
-{
-	struct serial_struct new_serial;
-	struct dec_serial old_info;
-	int 			retval = 0;
-
-	if (!new_info)
-		return -EFAULT;
-	copy_from_user(&new_serial,new_info,sizeof(new_serial));
-	old_info = *info;
-
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((new_serial.baud_base != info->baud_base) ||
-		    (new_serial.type != info->type) ||
-		    (new_serial.close_delay != info->close_delay) ||
-		    ((new_serial.flags & ~ZILOG_USR_MASK) !=
-		     (info->flags & ~ZILOG_USR_MASK)))
-			return -EPERM;
-		info->flags = ((info->flags & ~ZILOG_USR_MASK) |
-			       (new_serial.flags & ZILOG_USR_MASK));
-		info->custom_divisor = new_serial.custom_divisor;
-		goto check_and_exit;
-	}
-
-	if (info->count > 1)
-		return -EBUSY;
-
-	/*
-	 * OK, past this point, all the error checking has been done.
-	 * At this point, we start making changes.....
-	 */
-
-	info->baud_base = new_serial.baud_base;
-	info->flags = ((info->flags & ~ZILOG_FLAGS) |
-			(new_serial.flags & ZILOG_FLAGS));
-	info->type = new_serial.type;
-	info->close_delay = new_serial.close_delay;
-	info->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
-	retval = zs_startup(info);
-	return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * 	    is emptied.  On bus types like RS485, the transmitter must
- * 	    release the bus after transmitting. This must be done when
- * 	    the transmit shift register is empty, not be done when the
- * 	    transmit holding register is empty.  This functionality
- * 	    allows an RS485 driver to be written in user space.
- */
-static int get_lsr_info(struct dec_serial * info, unsigned int *value)
-{
-	unsigned char status;
-
-	spin_lock(&zs_lock);
-	status = read_zsreg(info->zs_channel, 0);
-	spin_unlock_irq(&zs_lock);
-	put_user(status,value);
-	return 0;
-}
-
-static int rs_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct dec_serial * info = (struct dec_serial *)tty->driver_data;
-	unsigned char control, status_a, status_b;
-	unsigned int result;
-
-	if (info->hook)
-		return -ENODEV;
-
-	if (serial_paranoia_check(info, tty->name, __FUNCTION__))
-		return -ENODEV;
-
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	if (info->zs_channel == info->zs_chan_a)
-		result = 0;
-	else {
-		spin_lock(&zs_lock);
-		control = info->zs_chan_a->curregs[5];
-		status_a = read_zsreg(info->zs_chan_a, 0);
-		status_b = read_zsreg(info->zs_channel, 0);
-		spin_unlock_irq(&zs_lock);
-		result =  ((control  & RTS) ? TIOCM_RTS: 0)
-			| ((control  & DTR) ? TIOCM_DTR: 0)
-			| ((status_b & DCD) ? TIOCM_CAR: 0)
-			| ((status_a & DCD) ? TIOCM_RNG: 0)
-			| ((status_a & SYNC_HUNT) ? TIOCM_DSR: 0)
-			| ((status_b & CTS) ? TIOCM_CTS: 0);
-	}
-	return result;
-}
-
-static int rs_tiocmset(struct tty_struct *tty, struct file *file,
-                       unsigned int set, unsigned int clear)
-{
-	struct dec_serial * info = (struct dec_serial *)tty->driver_data;
-
-	if (info->hook)
-		return -ENODEV;
-
-	if (serial_paranoia_check(info, tty->name, __FUNCTION__))
-		return -ENODEV;
-
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	if (info->zs_channel == info->zs_chan_a)
-		return 0;
-
-	spin_lock(&zs_lock);
-	if (set & TIOCM_RTS)
-		info->zs_chan_a->curregs[5] |= RTS;
-	if (set & TIOCM_DTR)
-		info->zs_chan_a->curregs[5] |= DTR;
-	if (clear & TIOCM_RTS)
-		info->zs_chan_a->curregs[5] &= ~RTS;
-	if (clear & TIOCM_DTR)
-		info->zs_chan_a->curregs[5] &= ~DTR;
-	write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]);
-	spin_unlock_irq(&zs_lock);
-	return 0;
-}
-
-/*
- * rs_break - turn transmit break condition on/off
- */
-static void rs_break(struct tty_struct *tty, int break_state)
-{
-	struct dec_serial *info = (struct dec_serial *) tty->driver_data;
-	unsigned long flags;
-
-	if (serial_paranoia_check(info, tty->name, "rs_break"))
-		return;
-	if (!info->port)
-		return;
-
-	spin_lock_irqsave(&zs_lock, flags);
-	if (break_state == -1)
-		info->zs_channel->curregs[5] |= SND_BRK;
-	else
-		info->zs_channel->curregs[5] &= ~SND_BRK;
-	write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]);
-	spin_unlock_irqrestore(&zs_lock, flags);
-}
-
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
-		    unsigned int cmd, unsigned long arg)
-{
-	struct dec_serial * info = (struct dec_serial *)tty->driver_data;
-
-	if (info->hook)
-		return -ENODEV;
-
-	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
-		return -ENODEV;
-
-	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD)  &&
-	    (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
-		if (tty->flags & (1 << TTY_IO_ERROR))
-		    return -EIO;
-	}
-
-	switch (cmd) {
-	case TIOCGSERIAL:
-		if (!access_ok(VERIFY_WRITE, (void *)arg,
-			       sizeof(struct serial_struct)))
-			return -EFAULT;
-		return get_serial_info(info, (struct serial_struct *)arg);
-
-	case TIOCSSERIAL:
-		return set_serial_info(info, (struct serial_struct *)arg);
-
-	case TIOCSERGETLSR:			/* Get line status register */
-		if (!access_ok(VERIFY_WRITE, (void *)arg,
-			       sizeof(unsigned int)))
-			return -EFAULT;
-		return get_lsr_info(info, (unsigned int *)arg);
-
-	case TIOCSERGSTRUCT:
-		if (!access_ok(VERIFY_WRITE, (void *)arg,
-			       sizeof(struct dec_serial)))
-			return -EFAULT;
-		copy_from_user((struct dec_serial *)arg, info,
-			       sizeof(struct dec_serial));
-		return 0;
-
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	struct dec_serial *info = (struct dec_serial *)tty->driver_data;
-	int was_stopped;
-
-	if (tty->termios->c_cflag == old_termios->c_cflag)
-		return;
-	was_stopped = info->tx_stopped;
-
-	change_speed(info);
-
-	if (was_stopped && !info->tx_stopped)
-		rs_start(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_close()
- *
- * This routine is called when the serial port gets closed.
- * Wait for the last remaining data to be sent.
- * ------------------------------------------------------------
- */
-static void rs_close(struct tty_struct *tty, struct file * filp)
-{
-	struct dec_serial * info = (struct dec_serial *)tty->driver_data;
-	unsigned long flags;
-
-	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
-		return;
-
-	spin_lock_irqsave(&zs_lock, flags);
-
-	if (tty_hung_up_p(filp)) {
-		spin_unlock_irqrestore(&zs_lock, flags);
-		return;
-	}
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_close ttyS%d, count = %d\n", info->line, info->count);
-#endif
-	if ((tty->count == 1) && (info->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk("rs_close: bad serial port count; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
-	}
-	if (--info->count < 0) {
-		printk("rs_close: bad serial port count for ttyS%d: %d\n",
-		       info->line, info->count);
-		info->count = 0;
-	}
-	if (info->count) {
-		spin_unlock_irqrestore(&zs_lock, flags);
-		return;
-	}
-	info->flags |= ZILOG_CLOSING;
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	if (info->closing_wait != ZILOG_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receiver and receive interrupts.
-	 */
-	info->zs_channel->curregs[3] &= ~RxENABLE;
-	write_zsreg(info->zs_channel, 3, info->zs_channel->curregs[3]);
-	info->zs_channel->curregs[1] = 0;	/* disable any rx ints */
-	write_zsreg(info->zs_channel, 1, info->zs_channel->curregs[1]);
-	ZS_CLEARFIFO(info->zs_channel);
-	if (info->flags & ZILOG_INITIALIZED) {
-		/*
-		 * Before we drop DTR, make sure the SCC transmitter
-		 * has completely drained.
-		 */
-		rs_wait_until_sent(tty, info->timeout);
-	}
-
-	shutdown(info);
-	if (tty->driver->flush_buffer)
-		tty->driver->flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	tty->closing = 0;
-	info->event = 0;
-	info->tty = 0;
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING);
-	wake_up_interruptible(&info->close_wait);
-	spin_unlock_irqrestore(&zs_lock, flags);
-}
-
-/*
- * rs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-	struct dec_serial *info = (struct dec_serial *) tty->driver_data;
-	unsigned long orig_jiffies;
-	int char_time;
-
-	if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
-		return;
-
-	orig_jiffies = jiffies;
-	/*
-	 * Set the check interval to be 1/5 of the estimated time to
-	 * send a single character, and make it at least 1.  The check
-	 * interval should also be less than the timeout.
-	 */
-	char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
-	char_time = char_time / 5;
-	if (char_time == 0)
-		char_time = 1;
-	if (timeout)
-		char_time = min(char_time, timeout);
-	while ((read_zsreg(info->zs_channel, 1) & Tx_BUF_EMP) == 0) {
-		msleep_interruptible(jiffies_to_msecs(char_time));
-		if (signal_pending(current))
-			break;
-		if (timeout && time_after(jiffies, orig_jiffies + timeout))
-			break;
-	}
-	current->state = TASK_RUNNING;
-}
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-static void rs_hangup(struct tty_struct *tty)
-{
-	struct dec_serial * info = (struct dec_serial *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_hangup"))
-		return;
-
-	rs_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	info->count = 0;
-	info->flags &= ~ZILOG_NORMAL_ACTIVE;
-	info->tty = 0;
-	wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   struct dec_serial *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int		retval;
-	int		do_clocal = 0;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (info->flags & ZILOG_CLOSING) {
-		interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		return ((info->flags & ZILOG_HUP_NOTIFY) ?
-			-EAGAIN : -ERESTARTSYS);
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= ZILOG_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready before block: ttyS%d, count = %d\n",
-	       info->line, info->count);
-#endif
-	spin_lock(&zs_lock);
-	if (!tty_hung_up_p(filp))
-		info->count--;
-	spin_unlock_irq(&zs_lock);
-	info->blocked_open++;
-	while (1) {
-		spin_lock(&zs_lock);
-		if (tty->termios->c_cflag & CBAUD)
-			zs_rtsdtr(info, RTS | DTR, 1);
-		spin_unlock_irq(&zs_lock);
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ZILOG_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & ZILOG_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & ZILOG_CLOSING) &&
-		    (do_clocal || (read_zsreg(info->zs_channel, 0) & DCD)))
-			break;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-#ifdef SERIAL_DEBUG_OPEN
-		printk("block_til_ready blocking: ttyS%d, count = %d\n",
-		       info->line, info->count);
-#endif
-		schedule();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		info->count++;
-	info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready after blocking: ttyS%d, count = %d\n",
-	       info->line, info->count);
-#endif
-	if (retval)
-		return retval;
-	info->flags |= ZILOG_NORMAL_ACTIVE;
-	return 0;
-}
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its ZILOG structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int rs_open(struct tty_struct *tty, struct file * filp)
-{
-	struct dec_serial	*info;
-	int 			retval, line;
-
-	line = tty->index;
-	if ((line < 0) || (line >= zs_channels_found))
-		return -ENODEV;
-	info = zs_soft + line;
-
-	if (info->hook)
-		return -ENODEV;
-
-	if (serial_paranoia_check(info, tty->name, "rs_open"))
-		return -ENODEV;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s, count = %d\n", tty->name, info->count);
-#endif
-
-	info->count++;
-	tty->driver_data = info;
-	info->tty = tty;
-
-	/*
-	 * If the port is the middle of closing, bail out now
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ZILOG_CLOSING)) {
-		if (info->flags & ZILOG_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		return ((info->flags & ZILOG_HUP_NOTIFY) ?
-			-EAGAIN : -ERESTARTSYS);
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * Start up serial port
-	 */
-	retval = zs_startup(info);
-	if (retval)
-		return retval;
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
-		printk("rs_open returning after block_til_ready with %d\n",
-		       retval);
-#endif
-		return retval;
-	}
-
-#ifdef CONFIG_SERIAL_DEC_CONSOLE
-	if (zs_console.cflag && zs_console.index == line) {
-		tty->termios->c_cflag = zs_console.cflag;
-		zs_console.cflag = 0;
-		change_speed(info);
-	}
-#endif
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s successful...", tty->name);
-#endif
-/* tty->low_latency = 1; */
-	return 0;
-}
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void __init show_serial_version(void)
-{
-	printk("DECstation Z8530 serial driver version 0.09\n");
-}
-
-/*  Initialize Z8530s zs_channels
- */
-
-static void __init probe_sccs(void)
-{
-	struct dec_serial **pp;
-	int i, n, n_chips = 0, n_channels, chip, channel;
-	unsigned long flags;
-
-	/*
-	 * did we get here by accident?
-	 */
-	if(!BUS_PRESENT) {
-		printk("Not on JUNKIO machine, skipping probe_sccs\n");
-		return;
-	}
-
-	switch(mips_machtype) {
-#ifdef CONFIG_MACH_DECSTATION
-	case MACH_DS5000_2X0:
-	case MACH_DS5900:
-		n_chips = 2;
-		zs_parms = &ds_parms;
-		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
-		zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
-		break;
-	case MACH_DS5000_1XX:
-		n_chips = 2;
-		zs_parms = &ds_parms;
-		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
-		zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
-		break;
-	case MACH_DS5000_XX:
-		n_chips = 1;
-		zs_parms = &ds_parms;
-		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
-		break;
-#endif
-	default:
-		panic("zs: unsupported bus");
-	}
-	if (!zs_parms)
-		panic("zs: uninitialized parms");
-
-	pp = &zs_chain;
-
-	n_channels = 0;
-
-	for (chip = 0; chip < n_chips; chip++) {
-		for (channel = 0; channel <= 1; channel++) {
-			/*
-			 * The sccs reside on the high byte of the 16 bit IOBUS
-			 */
-			zs_channels[n_channels].control =
-				(volatile void *)CKSEG1ADDR(dec_kn_slot_base +
-			  (0 == chip ? zs_parms->scc0 : zs_parms->scc1) +
-			  (0 == channel ? zs_parms->channel_a_offset :
-			                  zs_parms->channel_b_offset));
-			zs_channels[n_channels].data =
-				zs_channels[n_channels].control + 4;
-
-#ifndef CONFIG_SERIAL_DEC_CONSOLE
-			/*
-			 * We're called early and memory managment isn't up, yet.
-			 * Thus request_region would fail.
-			 */
-			if (!request_region((unsigned long)
-					 zs_channels[n_channels].control,
-					 ZS_CHAN_IO_SIZE, "SCC"))
-				panic("SCC I/O region is not free");
-#endif
-			zs_soft[n_channels].zs_channel = &zs_channels[n_channels];
-			/* HACK alert! */
-			if (!(chip & 1))
-				zs_soft[n_channels].irq = zs_parms->irq0;
-			else
-				zs_soft[n_channels].irq = zs_parms->irq1;
-
-			/*
-			 *  Identification of channel A. Location of channel A
-                         *  inside chip depends on mapping of internal address
-			 *  the chip decodes channels by.
-			 *  CHANNEL_A_NR returns either 0 (in case of
-			 *  DECstations) or 1 (in case of Baget).
-			 */
-			if (CHANNEL_A_NR == channel)
-				zs_soft[n_channels].zs_chan_a =
-				    &zs_channels[n_channels+1-2*CHANNEL_A_NR];
-			else
-				zs_soft[n_channels].zs_chan_a =
-				    &zs_channels[n_channels];
-
-			*pp = &zs_soft[n_channels];
-			pp = &zs_soft[n_channels].zs_next;
-			n_channels++;
-		}
-	}
-
-	*pp = 0;
-	zs_channels_found = n_channels;
-
-	for (n = 0; n < zs_channels_found; n++) {
-		for (i = 0; i < 16; i++) {
-			zs_soft[n].zs_channel->curregs[i] = zs_init_regs[i];
-		}
-	}
-
-	spin_lock_irqsave(&zs_lock, flags);
-	for (n = 0; n < zs_channels_found; n++) {
-		if (n % 2 == 0) {
-			write_zsreg(zs_soft[n].zs_chan_a, R9, FHWRES);
-			udelay(10);
-			write_zsreg(zs_soft[n].zs_chan_a, R9, 0);
-		}
-		load_zsregs(zs_soft[n].zs_channel,
-			    zs_soft[n].zs_channel->curregs);
-	}
-	spin_unlock_irqrestore(&zs_lock, flags);
-}
-
-static const struct tty_operations serial_ops = {
-	.open = rs_open,
-	.close = rs_close,
-	.write = rs_write,
-	.flush_chars = rs_flush_chars,
-	.write_room = rs_write_room,
-	.chars_in_buffer = rs_chars_in_buffer,
-	.flush_buffer = rs_flush_buffer,
-	.ioctl = rs_ioctl,
-	.throttle = rs_throttle,
-	.unthrottle = rs_unthrottle,
-	.set_termios = rs_set_termios,
-	.stop = rs_stop,
-	.start = rs_start,
-	.hangup = rs_hangup,
-	.break_ctl = rs_break,
-	.wait_until_sent = rs_wait_until_sent,
-	.tiocmget = rs_tiocmget,
-	.tiocmset = rs_tiocmset,
-};
-
-/* zs_init inits the driver */
-int __init zs_init(void)
-{
-	int channel, i;
-	struct dec_serial *info;
-
-	if(!BUS_PRESENT)
-		return -ENODEV;
-
-	/* Find out how many Z8530 SCCs we have */
-	if (zs_chain == 0)
-		probe_sccs();
-	serial_driver = alloc_tty_driver(zs_channels_found);
-	if (!serial_driver)
-		return -ENOMEM;
-
-	show_serial_version();
-
-	/* Initialize the tty_driver structure */
-	/* Not all of this is exactly right for us. */
-
-	serial_driver->owner = THIS_MODULE;
-	serial_driver->name = "ttyS";
-	serial_driver->major = TTY_MAJOR;
-	serial_driver->minor_start = 64;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag =
-		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-	tty_set_operations(serial_driver, &serial_ops);
-
-	if (tty_register_driver(serial_driver))
-		panic("Couldn't register serial driver");
-
-	for (info = zs_chain, i = 0; info; info = info->zs_next, i++) {
-
-		/* Needed before interrupts are enabled. */
-		info->tty = 0;
-		info->x_char = 0;
-
-		if (info->hook && info->hook->init_info) {
-			(*info->hook->init_info)(info);
-			continue;
-		}
-
-		info->magic = SERIAL_MAGIC;
-		info->port = (int) info->zs_channel->control;
-		info->line = i;
-		info->custom_divisor = 16;
-		info->close_delay = 50;
-		info->closing_wait = 3000;
-		info->event = 0;
-		info->count = 0;
-		info->blocked_open = 0;
-		tasklet_init(&info->tlet, do_softint, (unsigned long)info);
-		init_waitqueue_head(&info->open_wait);
-		init_waitqueue_head(&info->close_wait);
-		printk("ttyS%02d at 0x%08x (irq = %d) is a Z85C30 SCC\n",
-		       info->line, info->port, info->irq);
-		tty_register_device(serial_driver, info->line, NULL);
-
-	}
-
-	for (channel = 0; channel < zs_channels_found; ++channel) {
-		zs_soft[channel].clk_divisor = 16;
-		zs_soft[channel].zs_baud = get_zsbaud(&zs_soft[channel]);
-
-		if (request_irq(zs_soft[channel].irq, rs_interrupt, IRQF_SHARED,
-				"scc", &zs_soft[channel]))
-			printk(KERN_ERR "decserial: can't get irq %d\n",
-			       zs_soft[channel].irq);
-
-		if (zs_soft[channel].hook) {
-			zs_startup(&zs_soft[channel]);
-			if (zs_soft[channel].hook->init_channel)
-				(*zs_soft[channel].hook->init_channel)
-					(&zs_soft[channel]);
-		}
-	}
-
-	return 0;
-}
-
-/*
- * polling I/O routines
- */
-static int zs_poll_tx_char(void *handle, unsigned char ch)
-{
-	struct dec_serial *info = handle;
-	struct dec_zschannel *chan = info->zs_channel;
-	int    ret;
-
-	if(chan) {
-		int loops = 10000;
-
-		while (loops && !(read_zsreg(chan, 0) & Tx_BUF_EMP))
-			loops--;
-
-		if (loops) {
-			write_zsdata(chan, ch);
-			ret = 0;
-		} else
-			ret = -EAGAIN;
-
-		return ret;
-	} else
-		return -ENODEV;
-}
-
-static int zs_poll_rx_char(void *handle)
-{
-	struct dec_serial *info = handle;
-        struct dec_zschannel *chan = info->zs_channel;
-        int    ret;
-
-	if(chan) {
-                int loops = 10000;
-
-		while (loops && !(read_zsreg(chan, 0) & Rx_CH_AV))
-			loops--;
-
-                if (loops)
-                        ret = read_zsdata(chan);
-                else
-                        ret = -EAGAIN;
-
-		return ret;
-	} else
-		return -ENODEV;
-}
-
-int register_zs_hook(unsigned int channel, struct dec_serial_hook *hook)
-{
-	struct dec_serial *info = &zs_soft[channel];
-
-	if (info->hook) {
-		printk("%s: line %d has already a hook registered\n",
-		       __FUNCTION__, channel);
-
-		return 0;
-	} else {
-		hook->poll_rx_char = zs_poll_rx_char;
-		hook->poll_tx_char = zs_poll_tx_char;
-		info->hook = hook;
-
-		return 1;
-	}
-}
-
-int unregister_zs_hook(unsigned int channel)
-{
-	struct dec_serial *info = &zs_soft[channel];
-
-        if (info->hook) {
-                info->hook = NULL;
-                return 1;
-        } else {
-                printk("%s: trying to unregister hook on line %d,"
-                       " but none is registered\n", __FUNCTION__, channel);
-                return 0;
-        }
-}
-
-/*
- * ------------------------------------------------------------
- * Serial console driver
- * ------------------------------------------------------------
- */
-#ifdef CONFIG_SERIAL_DEC_CONSOLE
-
-
-/*
- *	Print a string to the serial port trying not to disturb
- *	any possible real use of the port...
- */
-static void serial_console_write(struct console *co, const char *s,
-				 unsigned count)
-{
-	struct dec_serial *info;
-	int i;
-
-	info = zs_soft + co->index;
-
-	for (i = 0; i < count; i++, s++) {
-		if(*s == '\n')
-			zs_poll_tx_char(info, '\r');
-		zs_poll_tx_char(info, *s);
-	}
-}
-
-static struct tty_driver *serial_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return serial_driver;
-}
-
-/*
- *	Setup initial baud/bits/parity. We do two things here:
- *	- construct a cflag setting for the first rs_open()
- *	- initialize the serial port
- *	Return non-zero if we didn't find a serial port.
- */
-static int __init serial_console_setup(struct console *co, char *options)
-{
-	struct dec_serial *info;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int cflag = CREAD | HUPCL | CLOCAL;
-	int clk_divisor = 16;
-	int brg;
-	char *s;
-	unsigned long flags;
-
-	if(!BUS_PRESENT)
-		return -ENODEV;
-
-	info = zs_soft + co->index;
-
-	if (zs_chain == 0)
-		probe_sccs();
-
-	info->is_cons = 1;
-
-	if (options) {
-		baud = simple_strtoul(options, NULL, 10);
-		s = options;
-		while(*s >= '0' && *s <= '9')
-			s++;
-		if (*s)
-			parity = *s++;
-		if (*s)
-			bits   = *s - '0';
-	}
-
-	/*
-	 *	Now construct a cflag setting.
-	 */
-	switch(baud) {
-	case 1200:
-		cflag |= B1200;
-		break;
-	case 2400:
-		cflag |= B2400;
-		break;
-	case 4800:
-		cflag |= B4800;
-		break;
-	case 19200:
-		cflag |= B19200;
-		break;
-	case 38400:
-		cflag |= B38400;
-		break;
-	case 57600:
-		cflag |= B57600;
-		break;
-	case 115200:
-		cflag |= B115200;
-		break;
-	case 9600:
-	default:
-		cflag |= B9600;
-		/*
-		 * Set this to a sane value to prevent a divide error.
-		 */
-		baud  = 9600;
-		break;
-	}
-	switch(bits) {
-	case 7:
-		cflag |= CS7;
-		break;
-	default:
-	case 8:
-		cflag |= CS8;
-		break;
-	}
-	switch(parity) {
-	case 'o': case 'O':
-		cflag |= PARODD;
-		break;
-	case 'e': case 'E':
-		cflag |= PARENB;
-		break;
-	}
-	co->cflag = cflag;
-
-	spin_lock_irqsave(&zs_lock, flags);
-
-	/*
-	 * Set up the baud rate generator.
-	 */
-	brg = BPS_TO_BRG(baud, zs_parms->clock / clk_divisor);
-	info->zs_channel->curregs[R12] = (brg & 255);
-	info->zs_channel->curregs[R13] = ((brg >> 8) & 255);
-
-	/*
-	 * Set byte size and parity.
-	 */
-	if (bits == 7) {
-		info->zs_channel->curregs[R3] |= Rx7;
-		info->zs_channel->curregs[R5] |= Tx7;
-	} else {
-		info->zs_channel->curregs[R3] |= Rx8;
-		info->zs_channel->curregs[R5] |= Tx8;
-	}
-	if (cflag & PARENB) {
-		info->zs_channel->curregs[R4] |= PAR_ENA;
-	}
-	if (!(cflag & PARODD)) {
-		info->zs_channel->curregs[R4] |= PAR_EVEN;
-	}
-	info->zs_channel->curregs[R4] |= SB1;
-
-	/*
-	 * Turn on RTS and DTR.
-	 */
-	zs_rtsdtr(info, RTS | DTR, 1);
-
-	/*
-	 * Finally, enable sequencing.
-	 */
-	info->zs_channel->curregs[R3] |= RxENABLE;
-	info->zs_channel->curregs[R5] |= TxENAB;
-
-	/*
-	 * Clear the interrupt registers.
-	 */
-	write_zsreg(info->zs_channel, R0, ERR_RES);
-	write_zsreg(info->zs_channel, R0, RES_H_IUS);
-
-	/*
-	 * Load up the new values.
-	 */
-	load_zsregs(info->zs_channel, info->zs_channel->curregs);
-
-	/* Save the current value of RR0 */
-	info->read_reg_zero = read_zsreg(info->zs_channel, R0);
-
-	zs_soft[co->index].clk_divisor = clk_divisor;
-	zs_soft[co->index].zs_baud = get_zsbaud(&zs_soft[co->index]);
-
-	spin_unlock_irqrestore(&zs_lock, flags);
-
-	return 0;
-}
-
-static struct console zs_console = {
-	.name		= "ttyS",
-	.write		= serial_console_write,
-	.device		= serial_console_device,
-	.setup		= serial_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-};
-
-/*
- *	Register console.
- */
-void __init zs_serial_console_init(void)
-{
-	register_console(&zs_console);
-}
-#endif /* ifdef CONFIG_SERIAL_DEC_CONSOLE */
-
-#ifdef CONFIG_KGDB
-struct dec_zschannel *zs_kgdbchan;
-static unsigned char scc_inittab[] = {
-	9,  0x80,	/* reset A side (CHRA) */
-	13, 0,		/* set baud rate divisor */
-	12, 1,
-	14, 1,		/* baud rate gen enable, src=rtxc (BRENABL) */
-	11, 0x50,	/* clocks = br gen (RCBR | TCBR) */
-	5,  0x6a,	/* tx 8 bits, assert RTS (Tx8 | TxENAB | RTS) */
-	4,  0x44,	/* x16 clock, 1 stop (SB1 | X16CLK)*/
-	3,  0xc1,	/* rx enable, 8 bits (RxENABLE | Rx8)*/
-};
-
-/* These are for receiving and sending characters under the kgdb
- * source level kernel debugger.
- */
-void putDebugChar(char kgdb_char)
-{
-	struct dec_zschannel *chan = zs_kgdbchan;
-	while ((read_zsreg(chan, 0) & Tx_BUF_EMP) == 0)
-		RECOVERY_DELAY;
-	write_zsdata(chan, kgdb_char);
-}
-char getDebugChar(void)
-{
-	struct dec_zschannel *chan = zs_kgdbchan;
-	while((read_zsreg(chan, 0) & Rx_CH_AV) == 0)
-		eieio(); /*barrier();*/
-	return read_zsdata(chan);
-}
-void kgdb_interruptible(int yes)
-{
-	struct dec_zschannel *chan = zs_kgdbchan;
-	int one, nine;
-	nine = read_zsreg(chan, 9);
-	if (yes == 1) {
-		one = EXT_INT_ENAB|RxINT_ALL;
-		nine |= MIE;
-		printk("turning serial ints on\n");
-	} else {
-		one = RxINT_DISAB;
-		nine &= ~MIE;
-		printk("turning serial ints off\n");
-	}
-	write_zsreg(chan, 1, one);
-	write_zsreg(chan, 9, nine);
-}
-
-static int kgdbhook_init_channel(void *handle)
-{
-	return 0;
-}
-
-static void kgdbhook_init_info(void *handle)
-{
-}
-
-static void kgdbhook_rx_char(void *handle, unsigned char ch, unsigned char fl)
-{
-	struct dec_serial *info = handle;
-
-	if (fl != TTY_NORMAL)
-		return;
-	if (ch == 0x03 || ch == '$')
-		breakpoint();
-}
-
-/* This sets up the serial port we're using, and turns on
- * interrupts for that channel, so kgdb is usable once we're done.
- */
-static inline void kgdb_chaninit(struct dec_zschannel *ms, int intson, int bps)
-{
-	int brg;
-	int i, x;
-	volatile char *sccc = ms->control;
-	brg = BPS_TO_BRG(bps, zs_parms->clock/16);
-	printk("setting bps on kgdb line to %d [brg=%x]\n", bps, brg);
-	for (i = 20000; i != 0; --i) {
-		x = *sccc; eieio();
-	}
-	for (i = 0; i < sizeof(scc_inittab); ++i) {
-		write_zsreg(ms, scc_inittab[i], scc_inittab[i+1]);
-		i++;
-	}
-}
-/* This is called at boot time to prime the kgdb serial debugging
- * serial line.  The 'tty_num' argument is 0 for /dev/ttya and 1
- * for /dev/ttyb which is determined in setup_arch() from the
- * boot command line flags.
- */
-struct dec_serial_hook zs_kgdbhook = {
-	.init_channel	= kgdbhook_init_channel,
-	.init_info	= kgdbhook_init_info,
-	.rx_char	= kgdbhook_rx_char,
-	.cflags		= B38400 | CS8 | CLOCAL,
-};
-
-void __init zs_kgdb_hook(int tty_num)
-{
-	/* Find out how many Z8530 SCCs we have */
-	if (zs_chain == 0)
-		probe_sccs();
-	zs_soft[tty_num].zs_channel = &zs_channels[tty_num];
-	zs_kgdbchan = zs_soft[tty_num].zs_channel;
-	zs_soft[tty_num].change_needed = 0;
-	zs_soft[tty_num].clk_divisor = 16;
-	zs_soft[tty_num].zs_baud = 38400;
- 	zs_soft[tty_num].hook = &zs_kgdbhook; /* This runs kgdb */
-	/* Turn on transmitter/receiver at 8-bits/char */
-        kgdb_chaninit(zs_soft[tty_num].zs_channel, 1, 38400);
-	printk("KGDB: on channel %d initialized\n", tty_num);
-	set_debug_traps(); /* init stub */
-}
-#endif /* ifdef CONFIG_KGDB */
diff --git a/drivers/tc/zs.h b/drivers/tc/zs.h
deleted file mode 100644
index 1351220..0000000
--- a/drivers/tc/zs.h
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * drivers/tc/zs.h: Definitions for the DECstation Z85C30 serial driver.
- *
- * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras.
- * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen.
- *
- * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2004, 2005  Maciej W. Rozycki
- */
-#ifndef _DECSERIAL_H
-#define _DECSERIAL_H
-
-#include <asm/dec/serial.h>
-
-#define NUM_ZSREGS 16
-
-struct serial_struct {
-	int	type;
-	int	line;
-	int	port;
-	int	irq;
-	int	flags;
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	baud_base;
-	unsigned short	close_delay;
-	char	reserved_char[2];
-	int	hub6;
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned short	closing_wait2; /* no longer used... */
-	int	reserved[4];
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define ZILOG_CLOSING_WAIT_INF	0
-#define ZILOG_CLOSING_WAIT_NONE	65535
-
-/*
- * Definitions for ZILOG_struct (and serial_struct) flags field
- */
-#define ZILOG_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes
-				   on the callout port */
-#define ZILOG_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
-#define ZILOG_SAK	0x0004	/* Secure Attention Key (Orange book) */
-#define ZILOG_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define ZILOG_SPD_MASK	0x0030
-#define ZILOG_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */
-
-#define ZILOG_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
-#define ZILOG_SPD_CUST	0x0030  /* Use user-specified divisor */
-
-#define ZILOG_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
-#define ZILOG_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define ZILOG_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define ZILOG_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define ZILOG_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define ZILOG_FLAGS	0x0FFF	/* Possible legal ZILOG flags */
-#define ZILOG_USR_MASK 0x0430	/* Legal flags that non-privileged
-				 * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define ZILOG_INITIALIZED	0x80000000 /* Serial port was initialized */
-#define ZILOG_CALLOUT_ACTIVE	0x40000000 /* Call out device is active */
-#define ZILOG_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
-#define ZILOG_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
-#define ZILOG_CLOSING		0x08000000 /* Serial port is closing */
-#define ZILOG_CTS_FLOW		0x04000000 /* Do CTS flow control */
-#define ZILOG_CHECK_CD		0x02000000 /* i.e., CLOCAL */
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct dec_zschannel {
-	volatile unsigned char *control;
-	volatile unsigned char *data;
-
-	/* Current write register values */
-	unsigned char curregs[NUM_ZSREGS];
-};
-
-struct dec_serial {
-	struct dec_serial	*zs_next;	/* For IRQ servicing chain.  */
-	struct dec_zschannel	*zs_channel;	/* Channel registers.  */
-	struct dec_zschannel	*zs_chan_a;	/* A side registers.  */
-	unsigned char		read_reg_zero;
-
-	struct dec_serial_hook	*hook;		/* Hook on this channel.  */
-	int			tty_break;	/* Set on BREAK condition.  */
-	int			is_cons;	/* Is this our console.  */
-	int			tx_active;	/* Char is being xmitted.  */
-	int			tx_stopped;	/* Output is suspended.  */
-
-	/*
-	 * We need to know the current clock divisor
-	 * to read the bps rate the chip has currently loaded.
-	 */
-	int			clk_divisor;	/* May be 1, 16, 32, or 64.  */
-	int			zs_baud;
-
-	char			change_needed;
-
-	int			magic;
-	int			baud_base;
-	int			port;
-	int			irq;
-	int			flags; 		/* Defined in tty.h.  */
-	int			type; 		/* UART type.  */
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			xmit_fifo_size;
-	int			custom_divisor;
-	int			x_char;		/* XON/XOFF character.  */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	unsigned long		event;
-	unsigned long		last_active;
-	int			line;
-	int			count;		/* # of fds on device.  */
-	int			blocked_open;	/* # of blocked opens.  */
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	struct tasklet_struct	tlet;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-};
-
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define SERIAL_XMIT_SIZE 4096
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP	0
-
-#endif /* __KERNEL__ */
-
-/* Conversion routines to/from brg time constants from/to bits
- * per second.
- */
-#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
-#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
-
-/* The Zilog register set */
-
-#define	FLAG	0x7e
-
-/* Write Register 0 */
-#define	R0	0		/* Register selects */
-#define	R1	1
-#define	R2	2
-#define	R3	3
-#define	R4	4
-#define	R5	5
-#define	R6	6
-#define	R7	7
-#define	R8	8
-#define	R9	9
-#define	R10	10
-#define	R11	11
-#define	R12	12
-#define	R13	13
-#define	R14	14
-#define	R15	15
-
-#define	NULLCODE	0	/* Null Code */
-#define	POINT_HIGH	0x8	/* Select upper half of registers */
-#define	RES_EXT_INT	0x10	/* Reset Ext. Status Interrupts */
-#define	SEND_ABORT	0x18	/* HDLC Abort */
-#define	RES_RxINT_FC	0x20	/* Reset RxINT on First Character */
-#define	RES_Tx_P	0x28	/* Reset TxINT Pending */
-#define	ERR_RES		0x30	/* Error Reset */
-#define	RES_H_IUS	0x38	/* Reset highest IUS */
-
-#define	RES_Rx_CRC	0x40	/* Reset Rx CRC Checker */
-#define	RES_Tx_CRC	0x80	/* Reset Tx CRC Checker */
-#define	RES_EOM_L	0xC0	/* Reset EOM latch */
-
-/* Write Register 1 */
-
-#define	EXT_INT_ENAB	0x1	/* Ext Int Enable */
-#define	TxINT_ENAB	0x2	/* Tx Int Enable */
-#define	PAR_SPEC	0x4	/* Parity is special condition */
-
-#define	RxINT_DISAB	0	/* Rx Int Disable */
-#define	RxINT_FCERR	0x8	/* Rx Int on First Character Only or Error */
-#define	RxINT_ALL	0x10	/* Int on all Rx Characters or error */
-#define	RxINT_ERR	0x18	/* Int on error only */
-#define	RxINT_MASK	0x18
-
-#define	WT_RDY_RT	0x20	/* Wait/Ready on R/T */
-#define	WT_FN_RDYFN	0x40	/* Wait/FN/Ready FN */
-#define	WT_RDY_ENAB	0x80	/* Wait/Ready Enable */
-
-/* Write Register #2 (Interrupt Vector) */
-
-/* Write Register 3 */
-
-#define	RxENABLE	0x1	/* Rx Enable */
-#define	SYNC_L_INH	0x2	/* Sync Character Load Inhibit */
-#define	ADD_SM		0x4	/* Address Search Mode (SDLC) */
-#define	RxCRC_ENAB	0x8	/* Rx CRC Enable */
-#define	ENT_HM		0x10	/* Enter Hunt Mode */
-#define	AUTO_ENAB	0x20	/* Auto Enables */
-#define	Rx5		0x0	/* Rx 5 Bits/Character */
-#define	Rx7		0x40	/* Rx 7 Bits/Character */
-#define	Rx6		0x80	/* Rx 6 Bits/Character */
-#define	Rx8		0xc0	/* Rx 8 Bits/Character */
-#define RxNBITS_MASK	0xc0
-
-/* Write Register 4 */
-
-#define	PAR_ENA		0x1	/* Parity Enable */
-#define	PAR_EVEN	0x2	/* Parity Even/Odd* */
-
-#define	SYNC_ENAB	0	/* Sync Modes Enable */
-#define	SB1		0x4	/* 1 stop bit/char */
-#define	SB15		0x8	/* 1.5 stop bits/char */
-#define	SB2		0xc	/* 2 stop bits/char */
-#define SB_MASK		0xc
-
-#define	MONSYNC		0	/* 8 Bit Sync character */
-#define	BISYNC		0x10	/* 16 bit sync character */
-#define	SDLC		0x20	/* SDLC Mode (01111110 Sync Flag) */
-#define	EXTSYNC		0x30	/* External Sync Mode */
-
-#define	X1CLK		0x0	/* x1 clock mode */
-#define	X16CLK		0x40	/* x16 clock mode */
-#define	X32CLK		0x80	/* x32 clock mode */
-#define	X64CLK		0xC0	/* x64 clock mode */
-#define XCLK_MASK	0xC0
-
-/* Write Register 5 */
-
-#define	TxCRC_ENAB	0x1	/* Tx CRC Enable */
-#define	RTS		0x2	/* RTS */
-#define	SDLC_CRC	0x4	/* SDLC/CRC-16 */
-#define	TxENAB		0x8	/* Tx Enable */
-#define	SND_BRK		0x10	/* Send Break */
-#define	Tx5		0x0	/* Tx 5 bits (or less)/character */
-#define	Tx7		0x20	/* Tx 7 bits/character */
-#define	Tx6		0x40	/* Tx 6 bits/character */
-#define	Tx8		0x60	/* Tx 8 bits/character */
-#define TxNBITS_MASK	0x60
-#define	DTR		0x80	/* DTR */
-
-/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
-
-/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
-
-/* Write Register 8 (transmit buffer) */
-
-/* Write Register 9 (Master interrupt control) */
-#define	VIS	1	/* Vector Includes Status */
-#define	NV	2	/* No Vector */
-#define	DLC	4	/* Disable Lower Chain */
-#define	MIE	8	/* Master Interrupt Enable */
-#define	STATHI	0x10	/* Status high */
-#define	SOFTACK	0x20	/* Software Interrupt Acknowledge */
-#define	NORESET	0	/* No reset on write to R9 */
-#define	CHRB	0x40	/* Reset channel B */
-#define	CHRA	0x80	/* Reset channel A */
-#define	FHWRES	0xc0	/* Force hardware reset */
-
-/* Write Register 10 (misc control bits) */
-#define	BIT6	1	/* 6 bit/8bit sync */
-#define	LOOPMODE 2	/* SDLC Loop mode */
-#define	ABUNDER	4	/* Abort/flag on SDLC xmit underrun */
-#define	MARKIDLE 8	/* Mark/flag on idle */
-#define	GAOP	0x10	/* Go active on poll */
-#define	NRZ	0	/* NRZ mode */
-#define	NRZI	0x20	/* NRZI mode */
-#define	FM1	0x40	/* FM1 (transition = 1) */
-#define	FM0	0x60	/* FM0 (transition = 0) */
-#define	CRCPS	0x80	/* CRC Preset I/O */
-
-/* Write Register 11 (Clock Mode control) */
-#define	TRxCXT	0	/* TRxC = Xtal output */
-#define	TRxCTC	1	/* TRxC = Transmit clock */
-#define	TRxCBR	2	/* TRxC = BR Generator Output */
-#define	TRxCDP	3	/* TRxC = DPLL output */
-#define	TRxCOI	4	/* TRxC O/I */
-#define	TCRTxCP	0	/* Transmit clock = RTxC pin */
-#define	TCTRxCP	8	/* Transmit clock = TRxC pin */
-#define	TCBR	0x10	/* Transmit clock = BR Generator output */
-#define	TCDPLL	0x18	/* Transmit clock = DPLL output */
-#define	RCRTxCP	0	/* Receive clock = RTxC pin */
-#define	RCTRxCP	0x20	/* Receive clock = TRxC pin */
-#define	RCBR	0x40	/* Receive clock = BR Generator output */
-#define	RCDPLL	0x60	/* Receive clock = DPLL output */
-#define	RTxCX	0x80	/* RTxC Xtal/No Xtal */
-
-/* Write Register 12 (lower byte of baud rate generator time constant) */
-
-/* Write Register 13 (upper byte of baud rate generator time constant) */
-
-/* Write Register 14 (Misc control bits) */
-#define	BRENABL	1	/* Baud rate generator enable */
-#define	BRSRC	2	/* Baud rate generator source */
-#define	DTRREQ	4	/* DTR/Request function */
-#define	AUTOECHO 8	/* Auto Echo */
-#define	LOOPBAK	0x10	/* Local loopback */
-#define	SEARCH	0x20	/* Enter search mode */
-#define	RMC	0x40	/* Reset missing clock */
-#define	DISDPLL	0x60	/* Disable DPLL */
-#define	SSBR	0x80	/* Set DPLL source = BR generator */
-#define	SSRTxC	0xa0	/* Set DPLL source = RTxC */
-#define	SFMM	0xc0	/* Set FM mode */
-#define	SNRZI	0xe0	/* Set NRZI mode */
-
-/* Write Register 15 (external/status interrupt control) */
-#define	ZCIE	2	/* Zero count IE */
-#define	DCDIE	8	/* DCD IE */
-#define	SYNCIE	0x10	/* Sync/hunt IE */
-#define	CTSIE	0x20	/* CTS IE */
-#define	TxUIE	0x40	/* Tx Underrun/EOM IE */
-#define	BRKIE	0x80	/* Break/Abort IE */
-
-
-/* Read Register 0 */
-#define	Rx_CH_AV	0x1	/* Rx Character Available */
-#define	ZCOUNT		0x2	/* Zero count */
-#define	Tx_BUF_EMP	0x4	/* Tx Buffer empty */
-#define	DCD		0x8	/* DCD */
-#define	SYNC_HUNT	0x10	/* Sync/hunt */
-#define	CTS		0x20	/* CTS */
-#define	TxEOM		0x40	/* Tx underrun */
-#define	BRK_ABRT	0x80	/* Break/Abort */
-
-/* Read Register 1 */
-#define	ALL_SNT		0x1	/* All sent */
-/* Residue Data for 8 Rx bits/char programmed */
-#define	RES3		0x8	/* 0/3 */
-#define	RES4		0x4	/* 0/4 */
-#define	RES5		0xc	/* 0/5 */
-#define	RES6		0x2	/* 0/6 */
-#define	RES7		0xa	/* 0/7 */
-#define	RES8		0x6	/* 0/8 */
-#define	RES18		0xe	/* 1/8 */
-#define	RES28		0x0	/* 2/8 */
-/* Special Rx Condition Interrupts */
-#define	PAR_ERR		0x10	/* Parity error */
-#define	Rx_OVR		0x20	/* Rx Overrun Error */
-#define	FRM_ERR		0x40	/* CRC/Framing Error */
-#define	END_FR		0x80	/* End of Frame (SDLC) */
-
-/* Read Register 2 (channel b only) - Interrupt vector */
-
-/* Read Register 3 (interrupt pending register) ch a only */
-#define	CHBEXT	0x1		/* Channel B Ext/Stat IP */
-#define	CHBTxIP	0x2		/* Channel B Tx IP */
-#define	CHBRxIP	0x4		/* Channel B Rx IP */
-#define	CHAEXT	0x8		/* Channel A Ext/Stat IP */
-#define	CHATxIP	0x10		/* Channel A Tx IP */
-#define	CHARxIP	0x20		/* Channel A Rx IP */
-
-/* Read Register 8 (receive data register) */
-
-/* Read Register 10  (misc status bits) */
-#define	ONLOOP	2		/* On loop */
-#define	LOOPSEND 0x10		/* Loop sending */
-#define	CLK2MIS	0x40		/* Two clocks missing */
-#define	CLK1MIS	0x80		/* One clock missing */
-
-/* Read Register 12 (lower byte of baud rate generator constant) */
-
-/* Read Register 13 (upper byte of baud rate generator constant) */
-
-/* Read Register 15 (value of WR 15) */
-
-/* Misc macros */
-#define ZS_CLEARERR(channel)	(write_zsreg(channel, 0, ERR_RES))
-#define ZS_CLEARFIFO(channel)	do { volatile unsigned char garbage; \
-				     garbage = read_zsdata(channel); \
-				     garbage = read_zsdata(channel); \
-				     garbage = read_zsdata(channel); \
-				} while(0)
-
-#endif /* !(_DECSERIAL_H) */
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index da219c0..9de1c11 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -12,7 +12,7 @@
 
 config FB_LOGO_EXTRA
 	bool
-	depends on FB
+	depends on FB=y
 	default y if SPU_BASE
 
 config LOGO_LINUX_MONO
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
new file mode 100644
index 0000000..56592f0
--- /dev/null
+++ b/drivers/xen/Makefile
@@ -0,0 +1,2 @@
+obj-y	+= grant-table.o
+obj-y	+= xenbus/
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
new file mode 100644
index 0000000..ea94dba
--- /dev/null
+++ b/drivers/xen/grant-table.c
@@ -0,0 +1,582 @@
+/******************************************************************************
+ * grant_table.c
+ *
+ * Granting foreign access to our memory reservation.
+ *
+ * Copyright (c) 2005-2006, Christopher Clark
+ * Copyright (c) 2004-2005, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/uaccess.h>
+
+#include <xen/interface/xen.h>
+#include <xen/page.h>
+#include <xen/grant_table.h>
+
+#include <asm/pgtable.h>
+#include <asm/sync_bitops.h>
+
+
+/* External tools reserve first few grant table entries. */
+#define NR_RESERVED_ENTRIES 8
+#define GNTTAB_LIST_END 0xffffffff
+#define GREFS_PER_GRANT_FRAME (PAGE_SIZE / sizeof(struct grant_entry))
+
+static grant_ref_t **gnttab_list;
+static unsigned int nr_grant_frames;
+static unsigned int boot_max_nr_grant_frames;
+static int gnttab_free_count;
+static grant_ref_t gnttab_free_head;
+static DEFINE_SPINLOCK(gnttab_list_lock);
+
+static struct grant_entry *shared;
+
+static struct gnttab_free_callback *gnttab_free_callback_list;
+
+static int gnttab_expand(unsigned int req_entries);
+
+#define RPP (PAGE_SIZE / sizeof(grant_ref_t))
+
+static inline grant_ref_t *__gnttab_entry(grant_ref_t entry)
+{
+	return &gnttab_list[(entry) / RPP][(entry) % RPP];
+}
+/* This can be used as an l-value */
+#define gnttab_entry(entry) (*__gnttab_entry(entry))
+
+static int get_free_entries(unsigned count)
+{
+	unsigned long flags;
+	int ref, rc;
+	grant_ref_t head;
+
+	spin_lock_irqsave(&gnttab_list_lock, flags);
+
+	if ((gnttab_free_count < count) &&
+	    ((rc = gnttab_expand(count - gnttab_free_count)) < 0)) {
+		spin_unlock_irqrestore(&gnttab_list_lock, flags);
+		return rc;
+	}
+
+	ref = head = gnttab_free_head;
+	gnttab_free_count -= count;
+	while (count-- > 1)
+		head = gnttab_entry(head);
+	gnttab_free_head = gnttab_entry(head);
+	gnttab_entry(head) = GNTTAB_LIST_END;
+
+	spin_unlock_irqrestore(&gnttab_list_lock, flags);
+
+	return ref;
+}
+
+static void do_free_callbacks(void)
+{
+	struct gnttab_free_callback *callback, *next;
+
+	callback = gnttab_free_callback_list;
+	gnttab_free_callback_list = NULL;
+
+	while (callback != NULL) {
+		next = callback->next;
+		if (gnttab_free_count >= callback->count) {
+			callback->next = NULL;
+			callback->fn(callback->arg);
+		} else {
+			callback->next = gnttab_free_callback_list;
+			gnttab_free_callback_list = callback;
+		}
+		callback = next;
+	}
+}
+
+static inline void check_free_callbacks(void)
+{
+	if (unlikely(gnttab_free_callback_list))
+		do_free_callbacks();
+}
+
+static void put_free_entry(grant_ref_t ref)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&gnttab_list_lock, flags);
+	gnttab_entry(ref) = gnttab_free_head;
+	gnttab_free_head = ref;
+	gnttab_free_count++;
+	check_free_callbacks();
+	spin_unlock_irqrestore(&gnttab_list_lock, flags);
+}
+
+static void update_grant_entry(grant_ref_t ref, domid_t domid,
+			       unsigned long frame, unsigned flags)
+{
+	/*
+	 * Introducing a valid entry into the grant table:
+	 *  1. Write ent->domid.
+	 *  2. Write ent->frame:
+	 *      GTF_permit_access:   Frame to which access is permitted.
+	 *      GTF_accept_transfer: Pseudo-phys frame slot being filled by new
+	 *                           frame, or zero if none.
+	 *  3. Write memory barrier (WMB).
+	 *  4. Write ent->flags, inc. valid type.
+	 */
+	shared[ref].frame = frame;
+	shared[ref].domid = domid;
+	wmb();
+	shared[ref].flags = flags;
+}
+
+/*
+ * Public grant-issuing interface functions
+ */
+void gnttab_grant_foreign_access_ref(grant_ref_t ref, domid_t domid,
+				     unsigned long frame, int readonly)
+{
+	update_grant_entry(ref, domid, frame,
+			   GTF_permit_access | (readonly ? GTF_readonly : 0));
+}
+EXPORT_SYMBOL_GPL(gnttab_grant_foreign_access_ref);
+
+int gnttab_grant_foreign_access(domid_t domid, unsigned long frame,
+				int readonly)
+{
+	int ref;
+
+	ref = get_free_entries(1);
+	if (unlikely(ref < 0))
+		return -ENOSPC;
+
+	gnttab_grant_foreign_access_ref(ref, domid, frame, readonly);
+
+	return ref;
+}
+EXPORT_SYMBOL_GPL(gnttab_grant_foreign_access);
+
+int gnttab_query_foreign_access(grant_ref_t ref)
+{
+	u16 nflags;
+
+	nflags = shared[ref].flags;
+
+	return (nflags & (GTF_reading|GTF_writing));
+}
+EXPORT_SYMBOL_GPL(gnttab_query_foreign_access);
+
+int gnttab_end_foreign_access_ref(grant_ref_t ref, int readonly)
+{
+	u16 flags, nflags;
+
+	nflags = shared[ref].flags;
+	do {
+		flags = nflags;
+		if (flags & (GTF_reading|GTF_writing)) {
+			printk(KERN_ALERT "WARNING: g.e. still in use!\n");
+			return 0;
+		}
+	} while ((nflags = sync_cmpxchg(&shared[ref].flags, flags, 0)) != flags);
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(gnttab_end_foreign_access_ref);
+
+void gnttab_end_foreign_access(grant_ref_t ref, int readonly,
+			       unsigned long page)
+{
+	if (gnttab_end_foreign_access_ref(ref, readonly)) {
+		put_free_entry(ref);
+		if (page != 0)
+			free_page(page);
+	} else {
+		/* XXX This needs to be fixed so that the ref and page are
+		   placed on a list to be freed up later. */
+		printk(KERN_WARNING
+		       "WARNING: leaking g.e. and page still in use!\n");
+	}
+}
+EXPORT_SYMBOL_GPL(gnttab_end_foreign_access);
+
+int gnttab_grant_foreign_transfer(domid_t domid, unsigned long pfn)
+{
+	int ref;
+
+	ref = get_free_entries(1);
+	if (unlikely(ref < 0))
+		return -ENOSPC;
+	gnttab_grant_foreign_transfer_ref(ref, domid, pfn);
+
+	return ref;
+}
+EXPORT_SYMBOL_GPL(gnttab_grant_foreign_transfer);
+
+void gnttab_grant_foreign_transfer_ref(grant_ref_t ref, domid_t domid,
+				       unsigned long pfn)
+{
+	update_grant_entry(ref, domid, pfn, GTF_accept_transfer);
+}
+EXPORT_SYMBOL_GPL(gnttab_grant_foreign_transfer_ref);
+
+unsigned long gnttab_end_foreign_transfer_ref(grant_ref_t ref)
+{
+	unsigned long frame;
+	u16           flags;
+
+	/*
+	 * If a transfer is not even yet started, try to reclaim the grant
+	 * reference and return failure (== 0).
+	 */
+	while (!((flags = shared[ref].flags) & GTF_transfer_committed)) {
+		if (sync_cmpxchg(&shared[ref].flags, flags, 0) == flags)
+			return 0;
+		cpu_relax();
+	}
+
+	/* If a transfer is in progress then wait until it is completed. */
+	while (!(flags & GTF_transfer_completed)) {
+		flags = shared[ref].flags;
+		cpu_relax();
+	}
+
+	rmb();	/* Read the frame number /after/ reading completion status. */
+	frame = shared[ref].frame;
+	BUG_ON(frame == 0);
+
+	return frame;
+}
+EXPORT_SYMBOL_GPL(gnttab_end_foreign_transfer_ref);
+
+unsigned long gnttab_end_foreign_transfer(grant_ref_t ref)
+{
+	unsigned long frame = gnttab_end_foreign_transfer_ref(ref);
+	put_free_entry(ref);
+	return frame;
+}
+EXPORT_SYMBOL_GPL(gnttab_end_foreign_transfer);
+
+void gnttab_free_grant_reference(grant_ref_t ref)
+{
+	put_free_entry(ref);
+}
+EXPORT_SYMBOL_GPL(gnttab_free_grant_reference);
+
+void gnttab_free_grant_references(grant_ref_t head)
+{
+	grant_ref_t ref;
+	unsigned long flags;
+	int count = 1;
+	if (head == GNTTAB_LIST_END)
+		return;
+	spin_lock_irqsave(&gnttab_list_lock, flags);
+	ref = head;
+	while (gnttab_entry(ref) != GNTTAB_LIST_END) {
+		ref = gnttab_entry(ref);
+		count++;
+	}
+	gnttab_entry(ref) = gnttab_free_head;
+	gnttab_free_head = head;
+	gnttab_free_count += count;
+	check_free_callbacks();
+	spin_unlock_irqrestore(&gnttab_list_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gnttab_free_grant_references);
+
+int gnttab_alloc_grant_references(u16 count, grant_ref_t *head)
+{
+	int h = get_free_entries(count);
+
+	if (h < 0)
+		return -ENOSPC;
+
+	*head = h;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gnttab_alloc_grant_references);
+
+int gnttab_empty_grant_references(const grant_ref_t *private_head)
+{
+	return (*private_head == GNTTAB_LIST_END);
+}
+EXPORT_SYMBOL_GPL(gnttab_empty_grant_references);
+
+int gnttab_claim_grant_reference(grant_ref_t *private_head)
+{
+	grant_ref_t g = *private_head;
+	if (unlikely(g == GNTTAB_LIST_END))
+		return -ENOSPC;
+	*private_head = gnttab_entry(g);
+	return g;
+}
+EXPORT_SYMBOL_GPL(gnttab_claim_grant_reference);
+
+void gnttab_release_grant_reference(grant_ref_t *private_head,
+				    grant_ref_t release)
+{
+	gnttab_entry(release) = *private_head;
+	*private_head = release;
+}
+EXPORT_SYMBOL_GPL(gnttab_release_grant_reference);
+
+void gnttab_request_free_callback(struct gnttab_free_callback *callback,
+				  void (*fn)(void *), void *arg, u16 count)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&gnttab_list_lock, flags);
+	if (callback->next)
+		goto out;
+	callback->fn = fn;
+	callback->arg = arg;
+	callback->count = count;
+	callback->next = gnttab_free_callback_list;
+	gnttab_free_callback_list = callback;
+	check_free_callbacks();
+out:
+	spin_unlock_irqrestore(&gnttab_list_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gnttab_request_free_callback);
+
+void gnttab_cancel_free_callback(struct gnttab_free_callback *callback)
+{
+	struct gnttab_free_callback **pcb;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gnttab_list_lock, flags);
+	for (pcb = &gnttab_free_callback_list; *pcb; pcb = &(*pcb)->next) {
+		if (*pcb == callback) {
+			*pcb = callback->next;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&gnttab_list_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gnttab_cancel_free_callback);
+
+static int grow_gnttab_list(unsigned int more_frames)
+{
+	unsigned int new_nr_grant_frames, extra_entries, i;
+
+	new_nr_grant_frames = nr_grant_frames + more_frames;
+	extra_entries       = more_frames * GREFS_PER_GRANT_FRAME;
+
+	for (i = nr_grant_frames; i < new_nr_grant_frames; i++) {
+		gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC);
+		if (!gnttab_list[i])
+			goto grow_nomem;
+	}
+
+
+	for (i = GREFS_PER_GRANT_FRAME * nr_grant_frames;
+	     i < GREFS_PER_GRANT_FRAME * new_nr_grant_frames - 1; i++)
+		gnttab_entry(i) = i + 1;
+
+	gnttab_entry(i) = gnttab_free_head;
+	gnttab_free_head = GREFS_PER_GRANT_FRAME * nr_grant_frames;
+	gnttab_free_count += extra_entries;
+
+	nr_grant_frames = new_nr_grant_frames;
+
+	check_free_callbacks();
+
+	return 0;
+
+grow_nomem:
+	for ( ; i >= nr_grant_frames; i--)
+		free_page((unsigned long) gnttab_list[i]);
+	return -ENOMEM;
+}
+
+static unsigned int __max_nr_grant_frames(void)
+{
+	struct gnttab_query_size query;
+	int rc;
+
+	query.dom = DOMID_SELF;
+
+	rc = HYPERVISOR_grant_table_op(GNTTABOP_query_size, &query, 1);
+	if ((rc < 0) || (query.status != GNTST_okay))
+		return 4; /* Legacy max supported number of frames */
+
+	return query.max_nr_frames;
+}
+
+static inline unsigned int max_nr_grant_frames(void)
+{
+	unsigned int xen_max = __max_nr_grant_frames();
+
+	if (xen_max > boot_max_nr_grant_frames)
+		return boot_max_nr_grant_frames;
+	return xen_max;
+}
+
+static int map_pte_fn(pte_t *pte, struct page *pmd_page,
+		      unsigned long addr, void *data)
+{
+	unsigned long **frames = (unsigned long **)data;
+
+	set_pte_at(&init_mm, addr, pte, mfn_pte((*frames)[0], PAGE_KERNEL));
+	(*frames)++;
+	return 0;
+}
+
+static int unmap_pte_fn(pte_t *pte, struct page *pmd_page,
+			unsigned long addr, void *data)
+{
+
+	set_pte_at(&init_mm, addr, pte, __pte(0));
+	return 0;
+}
+
+static int gnttab_map(unsigned int start_idx, unsigned int end_idx)
+{
+	struct gnttab_setup_table setup;
+	unsigned long *frames;
+	unsigned int nr_gframes = end_idx + 1;
+	int rc;
+
+	frames = kmalloc(nr_gframes * sizeof(unsigned long), GFP_ATOMIC);
+	if (!frames)
+		return -ENOMEM;
+
+	setup.dom        = DOMID_SELF;
+	setup.nr_frames  = nr_gframes;
+	setup.frame_list = frames;
+
+	rc = HYPERVISOR_grant_table_op(GNTTABOP_setup_table, &setup, 1);
+	if (rc == -ENOSYS) {
+		kfree(frames);
+		return -ENOSYS;
+	}
+
+	BUG_ON(rc || setup.status);
+
+	if (shared == NULL) {
+		struct vm_struct *area;
+		area = alloc_vm_area(PAGE_SIZE * max_nr_grant_frames());
+		BUG_ON(area == NULL);
+		shared = area->addr;
+	}
+	rc = apply_to_page_range(&init_mm, (unsigned long)shared,
+				 PAGE_SIZE * nr_gframes,
+				 map_pte_fn, &frames);
+	BUG_ON(rc);
+	frames -= nr_gframes; /* adjust after map_pte_fn() */
+
+	kfree(frames);
+
+	return 0;
+}
+
+static int gnttab_resume(void)
+{
+	if (max_nr_grant_frames() < nr_grant_frames)
+		return -ENOSYS;
+	return gnttab_map(0, nr_grant_frames - 1);
+}
+
+static int gnttab_suspend(void)
+{
+	apply_to_page_range(&init_mm, (unsigned long)shared,
+			    PAGE_SIZE * nr_grant_frames,
+			    unmap_pte_fn, NULL);
+
+	return 0;
+}
+
+static int gnttab_expand(unsigned int req_entries)
+{
+	int rc;
+	unsigned int cur, extra;
+
+	cur = nr_grant_frames;
+	extra = ((req_entries + (GREFS_PER_GRANT_FRAME-1)) /
+		 GREFS_PER_GRANT_FRAME);
+	if (cur + extra > max_nr_grant_frames())
+		return -ENOSPC;
+
+	rc = gnttab_map(cur, cur + extra - 1);
+	if (rc == 0)
+		rc = grow_gnttab_list(extra);
+
+	return rc;
+}
+
+static int __devinit gnttab_init(void)
+{
+	int i;
+	unsigned int max_nr_glist_frames;
+	unsigned int nr_init_grefs;
+
+	if (!is_running_on_xen())
+		return -ENODEV;
+
+	nr_grant_frames = 1;
+	boot_max_nr_grant_frames = __max_nr_grant_frames();
+
+	/* Determine the maximum number of frames required for the
+	 * grant reference free list on the current hypervisor.
+	 */
+	max_nr_glist_frames = (boot_max_nr_grant_frames *
+			       GREFS_PER_GRANT_FRAME /
+			       (PAGE_SIZE / sizeof(grant_ref_t)));
+
+	gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *),
+			      GFP_KERNEL);
+	if (gnttab_list == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < nr_grant_frames; i++) {
+		gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL);
+		if (gnttab_list[i] == NULL)
+			goto ini_nomem;
+	}
+
+	if (gnttab_resume() < 0)
+		return -ENODEV;
+
+	nr_init_grefs = nr_grant_frames * GREFS_PER_GRANT_FRAME;
+
+	for (i = NR_RESERVED_ENTRIES; i < nr_init_grefs - 1; i++)
+		gnttab_entry(i) = i + 1;
+
+	gnttab_entry(nr_init_grefs - 1) = GNTTAB_LIST_END;
+	gnttab_free_count = nr_init_grefs - NR_RESERVED_ENTRIES;
+	gnttab_free_head  = NR_RESERVED_ENTRIES;
+
+	printk("Grant table initialized\n");
+	return 0;
+
+ ini_nomem:
+	for (i--; i >= 0; i--)
+		free_page((unsigned long)gnttab_list[i]);
+	kfree(gnttab_list);
+	return -ENOMEM;
+}
+
+core_initcall(gnttab_init);
diff --git a/drivers/xen/xenbus/Makefile b/drivers/xen/xenbus/Makefile
new file mode 100644
index 0000000..5571f5b
--- /dev/null
+++ b/drivers/xen/xenbus/Makefile
@@ -0,0 +1,7 @@
+obj-y	+= xenbus.o
+
+xenbus-objs =
+xenbus-objs += xenbus_client.o
+xenbus-objs += xenbus_comms.o
+xenbus-objs += xenbus_xs.o
+xenbus-objs += xenbus_probe.o
diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
new file mode 100644
index 0000000..9fd2f70
--- /dev/null
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -0,0 +1,569 @@
+/******************************************************************************
+ * Client-facing interface for the Xenbus driver.  In other words, the
+ * interface between the Xenbus and the device-specific code, be it the
+ * frontend or the backend of that driver.
+ *
+ * Copyright (C) 2005 XenSource Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <asm/xen/hypervisor.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/event_channel.h>
+#include <xen/events.h>
+#include <xen/grant_table.h>
+#include <xen/xenbus.h>
+
+const char *xenbus_strstate(enum xenbus_state state)
+{
+	static const char *const name[] = {
+		[ XenbusStateUnknown      ] = "Unknown",
+		[ XenbusStateInitialising ] = "Initialising",
+		[ XenbusStateInitWait     ] = "InitWait",
+		[ XenbusStateInitialised  ] = "Initialised",
+		[ XenbusStateConnected    ] = "Connected",
+		[ XenbusStateClosing      ] = "Closing",
+		[ XenbusStateClosed	  ] = "Closed",
+	};
+	return (state < ARRAY_SIZE(name)) ? name[state] : "INVALID";
+}
+EXPORT_SYMBOL_GPL(xenbus_strstate);
+
+/**
+ * xenbus_watch_path - register a watch
+ * @dev: xenbus device
+ * @path: path to watch
+ * @watch: watch to register
+ * @callback: callback to register
+ *
+ * Register a @watch on the given path, using the given xenbus_watch structure
+ * for storage, and the given @callback function as the callback.  Return 0 on
+ * success, or -errno on error.  On success, the given @path will be saved as
+ * @watch->node, and remains the caller's to free.  On error, @watch->node will
+ * be NULL, the device will switch to %XenbusStateClosing, and the error will
+ * be saved in the store.
+ */
+int xenbus_watch_path(struct xenbus_device *dev, const char *path,
+		      struct xenbus_watch *watch,
+		      void (*callback)(struct xenbus_watch *,
+				       const char **, unsigned int))
+{
+	int err;
+
+	watch->node = path;
+	watch->callback = callback;
+
+	err = register_xenbus_watch(watch);
+
+	if (err) {
+		watch->node = NULL;
+		watch->callback = NULL;
+		xenbus_dev_fatal(dev, err, "adding watch on %s", path);
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(xenbus_watch_path);
+
+
+/**
+ * xenbus_watch_pathfmt - register a watch on a sprintf-formatted path
+ * @dev: xenbus device
+ * @watch: watch to register
+ * @callback: callback to register
+ * @pathfmt: format of path to watch
+ *
+ * Register a watch on the given @path, using the given xenbus_watch
+ * structure for storage, and the given @callback function as the callback.
+ * Return 0 on success, or -errno on error.  On success, the watched path
+ * (@path/@path2) will be saved as @watch->node, and becomes the caller's to
+ * kfree().  On error, watch->node will be NULL, so the caller has nothing to
+ * free, the device will switch to %XenbusStateClosing, and the error will be
+ * saved in the store.
+ */
+int xenbus_watch_pathfmt(struct xenbus_device *dev,
+			 struct xenbus_watch *watch,
+			 void (*callback)(struct xenbus_watch *,
+					const char **, unsigned int),
+			 const char *pathfmt, ...)
+{
+	int err;
+	va_list ap;
+	char *path;
+
+	va_start(ap, pathfmt);
+	path = kvasprintf(GFP_KERNEL, pathfmt, ap);
+	va_end(ap);
+
+	if (!path) {
+		xenbus_dev_fatal(dev, -ENOMEM, "allocating path for watch");
+		return -ENOMEM;
+	}
+	err = xenbus_watch_path(dev, path, watch, callback);
+
+	if (err)
+		kfree(path);
+	return err;
+}
+EXPORT_SYMBOL_GPL(xenbus_watch_pathfmt);
+
+
+/**
+ * xenbus_switch_state
+ * @dev: xenbus device
+ * @xbt: transaction handle
+ * @state: new state
+ *
+ * Advertise in the store a change of the given driver to the given new_state.
+ * Return 0 on success, or -errno on error.  On error, the device will switch
+ * to XenbusStateClosing, and the error will be saved in the store.
+ */
+int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state state)
+{
+	/* We check whether the state is currently set to the given value, and
+	   if not, then the state is set.  We don't want to unconditionally
+	   write the given state, because we don't want to fire watches
+	   unnecessarily.  Furthermore, if the node has gone, we don't write
+	   to it, as the device will be tearing down, and we don't want to
+	   resurrect that directory.
+
+	   Note that, because of this cached value of our state, this function
+	   will not work inside a Xenstore transaction (something it was
+	   trying to in the past) because dev->state would not get reset if
+	   the transaction was aborted.
+
+	 */
+
+	int current_state;
+	int err;
+
+	if (state == dev->state)
+		return 0;
+
+	err = xenbus_scanf(XBT_NIL, dev->nodename, "state", "%d",
+			   &current_state);
+	if (err != 1)
+		return 0;
+
+	err = xenbus_printf(XBT_NIL, dev->nodename, "state", "%d", state);
+	if (err) {
+		if (state != XenbusStateClosing) /* Avoid looping */
+			xenbus_dev_fatal(dev, err, "writing new state");
+		return err;
+	}
+
+	dev->state = state;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xenbus_switch_state);
+
+int xenbus_frontend_closed(struct xenbus_device *dev)
+{
+	xenbus_switch_state(dev, XenbusStateClosed);
+	complete(&dev->down);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xenbus_frontend_closed);
+
+/**
+ * Return the path to the error node for the given device, or NULL on failure.
+ * If the value returned is non-NULL, then it is the caller's to kfree.
+ */
+static char *error_path(struct xenbus_device *dev)
+{
+	return kasprintf(GFP_KERNEL, "error/%s", dev->nodename);
+}
+
+
+static void xenbus_va_dev_error(struct xenbus_device *dev, int err,
+				const char *fmt, va_list ap)
+{
+	int ret;
+	unsigned int len;
+	char *printf_buffer = NULL;
+	char *path_buffer = NULL;
+
+#define PRINTF_BUFFER_SIZE 4096
+	printf_buffer = kmalloc(PRINTF_BUFFER_SIZE, GFP_KERNEL);
+	if (printf_buffer == NULL)
+		goto fail;
+
+	len = sprintf(printf_buffer, "%i ", -err);
+	ret = vsnprintf(printf_buffer+len, PRINTF_BUFFER_SIZE-len, fmt, ap);
+
+	BUG_ON(len + ret > PRINTF_BUFFER_SIZE-1);
+
+	dev_err(&dev->dev, "%s\n", printf_buffer);
+
+	path_buffer = error_path(dev);
+
+	if (path_buffer == NULL) {
+		dev_err(&dev->dev, "failed to write error node for %s (%s)\n",
+		       dev->nodename, printf_buffer);
+		goto fail;
+	}
+
+	if (xenbus_write(XBT_NIL, path_buffer, "error", printf_buffer) != 0) {
+		dev_err(&dev->dev, "failed to write error node for %s (%s)\n",
+		       dev->nodename, printf_buffer);
+		goto fail;
+	}
+
+fail:
+	kfree(printf_buffer);
+	kfree(path_buffer);
+}
+
+
+/**
+ * xenbus_dev_error
+ * @dev: xenbus device
+ * @err: error to report
+ * @fmt: error message format
+ *
+ * Report the given negative errno into the store, along with the given
+ * formatted message.
+ */
+void xenbus_dev_error(struct xenbus_device *dev, int err, const char *fmt, ...)
+{
+	va_list ap;
+
+	va_start(ap, fmt);
+	xenbus_va_dev_error(dev, err, fmt, ap);
+	va_end(ap);
+}
+EXPORT_SYMBOL_GPL(xenbus_dev_error);
+
+/**
+ * xenbus_dev_fatal
+ * @dev: xenbus device
+ * @err: error to report
+ * @fmt: error message format
+ *
+ * Equivalent to xenbus_dev_error(dev, err, fmt, args), followed by
+ * xenbus_switch_state(dev, NULL, XenbusStateClosing) to schedule an orderly
+ * closedown of this driver and its peer.
+ */
+
+void xenbus_dev_fatal(struct xenbus_device *dev, int err, const char *fmt, ...)
+{
+	va_list ap;
+
+	va_start(ap, fmt);
+	xenbus_va_dev_error(dev, err, fmt, ap);
+	va_end(ap);
+
+	xenbus_switch_state(dev, XenbusStateClosing);
+}
+EXPORT_SYMBOL_GPL(xenbus_dev_fatal);
+
+/**
+ * xenbus_grant_ring
+ * @dev: xenbus device
+ * @ring_mfn: mfn of ring to grant
+
+ * Grant access to the given @ring_mfn to the peer of the given device.  Return
+ * 0 on success, or -errno on error.  On error, the device will switch to
+ * XenbusStateClosing, and the error will be saved in the store.
+ */
+int xenbus_grant_ring(struct xenbus_device *dev, unsigned long ring_mfn)
+{
+	int err = gnttab_grant_foreign_access(dev->otherend_id, ring_mfn, 0);
+	if (err < 0)
+		xenbus_dev_fatal(dev, err, "granting access to ring page");
+	return err;
+}
+EXPORT_SYMBOL_GPL(xenbus_grant_ring);
+
+
+/**
+ * Allocate an event channel for the given xenbus_device, assigning the newly
+ * created local port to *port.  Return 0 on success, or -errno on error.  On
+ * error, the device will switch to XenbusStateClosing, and the error will be
+ * saved in the store.
+ */
+int xenbus_alloc_evtchn(struct xenbus_device *dev, int *port)
+{
+	struct evtchn_alloc_unbound alloc_unbound;
+	int err;
+
+	alloc_unbound.dom = DOMID_SELF;
+	alloc_unbound.remote_dom = dev->otherend_id;
+
+	err = HYPERVISOR_event_channel_op(EVTCHNOP_alloc_unbound,
+					  &alloc_unbound);
+	if (err)
+		xenbus_dev_fatal(dev, err, "allocating event channel");
+	else
+		*port = alloc_unbound.port;
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(xenbus_alloc_evtchn);
+
+
+/**
+ * Bind to an existing interdomain event channel in another domain. Returns 0
+ * on success and stores the local port in *port. On error, returns -errno,
+ * switches the device to XenbusStateClosing, and saves the error in XenStore.
+ */
+int xenbus_bind_evtchn(struct xenbus_device *dev, int remote_port, int *port)
+{
+	struct evtchn_bind_interdomain bind_interdomain;
+	int err;
+
+	bind_interdomain.remote_dom = dev->otherend_id;
+	bind_interdomain.remote_port = remote_port;
+
+	err = HYPERVISOR_event_channel_op(EVTCHNOP_bind_interdomain,
+					  &bind_interdomain);
+	if (err)
+		xenbus_dev_fatal(dev, err,
+				 "binding to event channel %d from domain %d",
+				 remote_port, dev->otherend_id);
+	else
+		*port = bind_interdomain.local_port;
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(xenbus_bind_evtchn);
+
+
+/**
+ * Free an existing event channel. Returns 0 on success or -errno on error.
+ */
+int xenbus_free_evtchn(struct xenbus_device *dev, int port)
+{
+	struct evtchn_close close;
+	int err;
+
+	close.port = port;
+
+	err = HYPERVISOR_event_channel_op(EVTCHNOP_close, &close);
+	if (err)
+		xenbus_dev_error(dev, err, "freeing event channel %d", port);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(xenbus_free_evtchn);
+
+
+/**
+ * xenbus_map_ring_valloc
+ * @dev: xenbus device
+ * @gnt_ref: grant reference
+ * @vaddr: pointer to address to be filled out by mapping
+ *
+ * Based on Rusty Russell's skeleton driver's map_page.
+ * Map a page of memory into this domain from another domain's grant table.
+ * xenbus_map_ring_valloc allocates a page of virtual address space, maps the
+ * page to that address, and sets *vaddr to that address.
+ * Returns 0 on success, and GNTST_* (see xen/include/interface/grant_table.h)
+ * or -ENOMEM on error. If an error is returned, device will switch to
+ * XenbusStateClosing and the error message will be saved in XenStore.
+ */
+int xenbus_map_ring_valloc(struct xenbus_device *dev, int gnt_ref, void **vaddr)
+{
+	struct gnttab_map_grant_ref op = {
+		.flags = GNTMAP_host_map,
+		.ref   = gnt_ref,
+		.dom   = dev->otherend_id,
+	};
+	struct vm_struct *area;
+
+	*vaddr = NULL;
+
+	area = alloc_vm_area(PAGE_SIZE);
+	if (!area)
+		return -ENOMEM;
+
+	op.host_addr = (unsigned long)area->addr;
+
+	if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
+		BUG();
+
+	if (op.status != GNTST_okay) {
+		free_vm_area(area);
+		xenbus_dev_fatal(dev, op.status,
+				 "mapping in shared page %d from domain %d",
+				 gnt_ref, dev->otherend_id);
+		return op.status;
+	}
+
+	/* Stuff the handle in an unused field */
+	area->phys_addr = (unsigned long)op.handle;
+
+	*vaddr = area->addr;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xenbus_map_ring_valloc);
+
+
+/**
+ * xenbus_map_ring
+ * @dev: xenbus device
+ * @gnt_ref: grant reference
+ * @handle: pointer to grant handle to be filled
+ * @vaddr: address to be mapped to
+ *
+ * Map a page of memory into this domain from another domain's grant table.
+ * xenbus_map_ring does not allocate the virtual address space (you must do
+ * this yourself!). It only maps in the page to the specified address.
+ * Returns 0 on success, and GNTST_* (see xen/include/interface/grant_table.h)
+ * or -ENOMEM on error. If an error is returned, device will switch to
+ * XenbusStateClosing and the error message will be saved in XenStore.
+ */
+int xenbus_map_ring(struct xenbus_device *dev, int gnt_ref,
+		    grant_handle_t *handle, void *vaddr)
+{
+	struct gnttab_map_grant_ref op = {
+		.host_addr = (unsigned long)vaddr,
+		.flags     = GNTMAP_host_map,
+		.ref       = gnt_ref,
+		.dom       = dev->otherend_id,
+	};
+
+	if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
+		BUG();
+
+	if (op.status != GNTST_okay) {
+		xenbus_dev_fatal(dev, op.status,
+				 "mapping in shared page %d from domain %d",
+				 gnt_ref, dev->otherend_id);
+	} else
+		*handle = op.handle;
+
+	return op.status;
+}
+EXPORT_SYMBOL_GPL(xenbus_map_ring);
+
+
+/**
+ * xenbus_unmap_ring_vfree
+ * @dev: xenbus device
+ * @vaddr: addr to unmap
+ *
+ * Based on Rusty Russell's skeleton driver's unmap_page.
+ * Unmap a page of memory in this domain that was imported from another domain.
+ * Use xenbus_unmap_ring_vfree if you mapped in your memory with
+ * xenbus_map_ring_valloc (it will free the virtual address space).
+ * Returns 0 on success and returns GNTST_* on error
+ * (see xen/include/interface/grant_table.h).
+ */
+int xenbus_unmap_ring_vfree(struct xenbus_device *dev, void *vaddr)
+{
+	struct vm_struct *area;
+	struct gnttab_unmap_grant_ref op = {
+		.host_addr = (unsigned long)vaddr,
+	};
+
+	/* It'd be nice if linux/vmalloc.h provided a find_vm_area(void *addr)
+	 * method so that we don't have to muck with vmalloc internals here.
+	 * We could force the user to hang on to their struct vm_struct from
+	 * xenbus_map_ring_valloc, but these 6 lines considerably simplify
+	 * this API.
+	 */
+	read_lock(&vmlist_lock);
+	for (area = vmlist; area != NULL; area = area->next) {
+		if (area->addr == vaddr)
+			break;
+	}
+	read_unlock(&vmlist_lock);
+
+	if (!area) {
+		xenbus_dev_error(dev, -ENOENT,
+				 "can't find mapped virtual address %p", vaddr);
+		return GNTST_bad_virt_addr;
+	}
+
+	op.handle = (grant_handle_t)area->phys_addr;
+
+	if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
+		BUG();
+
+	if (op.status == GNTST_okay)
+		free_vm_area(area);
+	else
+		xenbus_dev_error(dev, op.status,
+				 "unmapping page at handle %d error %d",
+				 (int16_t)area->phys_addr, op.status);
+
+	return op.status;
+}
+EXPORT_SYMBOL_GPL(xenbus_unmap_ring_vfree);
+
+
+/**
+ * xenbus_unmap_ring
+ * @dev: xenbus device
+ * @handle: grant handle
+ * @vaddr: addr to unmap
+ *
+ * Unmap a page of memory in this domain that was imported from another domain.
+ * Returns 0 on success and returns GNTST_* on error
+ * (see xen/include/interface/grant_table.h).
+ */
+int xenbus_unmap_ring(struct xenbus_device *dev,
+		      grant_handle_t handle, void *vaddr)
+{
+	struct gnttab_unmap_grant_ref op = {
+		.host_addr = (unsigned long)vaddr,
+		.handle    = handle,
+	};
+
+	if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
+		BUG();
+
+	if (op.status != GNTST_okay)
+		xenbus_dev_error(dev, op.status,
+				 "unmapping page at handle %d error %d",
+				 handle, op.status);
+
+	return op.status;
+}
+EXPORT_SYMBOL_GPL(xenbus_unmap_ring);
+
+
+/**
+ * xenbus_read_driver_state
+ * @path: path for driver
+ *
+ * Return the state of the driver rooted at the given store path, or
+ * XenbusStateUnknown if no state can be read.
+ */
+enum xenbus_state xenbus_read_driver_state(const char *path)
+{
+	enum xenbus_state result;
+	int err = xenbus_gather(XBT_NIL, path, "state", "%d", &result, NULL);
+	if (err)
+		result = XenbusStateUnknown;
+
+	return result;
+}
+EXPORT_SYMBOL_GPL(xenbus_read_driver_state);
diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c
new file mode 100644
index 0000000..6efbe3f
--- /dev/null
+++ b/drivers/xen/xenbus/xenbus_comms.c
@@ -0,0 +1,233 @@
+/******************************************************************************
+ * xenbus_comms.c
+ *
+ * Low level code to talks to Xen Store: ringbuffer and event channel.
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <xen/xenbus.h>
+#include <asm/xen/hypervisor.h>
+#include <xen/events.h>
+#include <xen/page.h>
+#include "xenbus_comms.h"
+
+static int xenbus_irq;
+
+static DECLARE_WORK(probe_work, xenbus_probe);
+
+static DECLARE_WAIT_QUEUE_HEAD(xb_waitq);
+
+static irqreturn_t wake_waiting(int irq, void *unused)
+{
+	if (unlikely(xenstored_ready == 0)) {
+		xenstored_ready = 1;
+		schedule_work(&probe_work);
+	}
+
+	wake_up(&xb_waitq);
+	return IRQ_HANDLED;
+}
+
+static int check_indexes(XENSTORE_RING_IDX cons, XENSTORE_RING_IDX prod)
+{
+	return ((prod - cons) <= XENSTORE_RING_SIZE);
+}
+
+static void *get_output_chunk(XENSTORE_RING_IDX cons,
+			      XENSTORE_RING_IDX prod,
+			      char *buf, uint32_t *len)
+{
+	*len = XENSTORE_RING_SIZE - MASK_XENSTORE_IDX(prod);
+	if ((XENSTORE_RING_SIZE - (prod - cons)) < *len)
+		*len = XENSTORE_RING_SIZE - (prod - cons);
+	return buf + MASK_XENSTORE_IDX(prod);
+}
+
+static const void *get_input_chunk(XENSTORE_RING_IDX cons,
+				   XENSTORE_RING_IDX prod,
+				   const char *buf, uint32_t *len)
+{
+	*len = XENSTORE_RING_SIZE - MASK_XENSTORE_IDX(cons);
+	if ((prod - cons) < *len)
+		*len = prod - cons;
+	return buf + MASK_XENSTORE_IDX(cons);
+}
+
+/**
+ * xb_write - low level write
+ * @data: buffer to send
+ * @len: length of buffer
+ *
+ * Returns 0 on success, error otherwise.
+ */
+int xb_write(const void *data, unsigned len)
+{
+	struct xenstore_domain_interface *intf = xen_store_interface;
+	XENSTORE_RING_IDX cons, prod;
+	int rc;
+
+	while (len != 0) {
+		void *dst;
+		unsigned int avail;
+
+		rc = wait_event_interruptible(
+			xb_waitq,
+			(intf->req_prod - intf->req_cons) !=
+			XENSTORE_RING_SIZE);
+		if (rc < 0)
+			return rc;
+
+		/* Read indexes, then verify. */
+		cons = intf->req_cons;
+		prod = intf->req_prod;
+		if (!check_indexes(cons, prod)) {
+			intf->req_cons = intf->req_prod = 0;
+			return -EIO;
+		}
+
+		dst = get_output_chunk(cons, prod, intf->req, &avail);
+		if (avail == 0)
+			continue;
+		if (avail > len)
+			avail = len;
+
+		/* Must write data /after/ reading the consumer index. */
+		mb();
+
+		memcpy(dst, data, avail);
+		data += avail;
+		len -= avail;
+
+		/* Other side must not see new producer until data is there. */
+		wmb();
+		intf->req_prod += avail;
+
+		/* Implies mb(): other side will see the updated producer. */
+		notify_remote_via_evtchn(xen_store_evtchn);
+	}
+
+	return 0;
+}
+
+int xb_data_to_read(void)
+{
+	struct xenstore_domain_interface *intf = xen_store_interface;
+	return (intf->rsp_cons != intf->rsp_prod);
+}
+
+int xb_wait_for_data_to_read(void)
+{
+	return wait_event_interruptible(xb_waitq, xb_data_to_read());
+}
+
+int xb_read(void *data, unsigned len)
+{
+	struct xenstore_domain_interface *intf = xen_store_interface;
+	XENSTORE_RING_IDX cons, prod;
+	int rc;
+
+	while (len != 0) {
+		unsigned int avail;
+		const char *src;
+
+		rc = xb_wait_for_data_to_read();
+		if (rc < 0)
+			return rc;
+
+		/* Read indexes, then verify. */
+		cons = intf->rsp_cons;
+		prod = intf->rsp_prod;
+		if (!check_indexes(cons, prod)) {
+			intf->rsp_cons = intf->rsp_prod = 0;
+			return -EIO;
+		}
+
+		src = get_input_chunk(cons, prod, intf->rsp, &avail);
+		if (avail == 0)
+			continue;
+		if (avail > len)
+			avail = len;
+
+		/* Must read data /after/ reading the producer index. */
+		rmb();
+
+		memcpy(data, src, avail);
+		data += avail;
+		len -= avail;
+
+		/* Other side must not see free space until we've copied out */
+		mb();
+		intf->rsp_cons += avail;
+
+		pr_debug("Finished read of %i bytes (%i to go)\n", avail, len);
+
+		/* Implies mb(): other side will see the updated consumer. */
+		notify_remote_via_evtchn(xen_store_evtchn);
+	}
+
+	return 0;
+}
+
+/**
+ * xb_init_comms - Set up interrupt handler off store event channel.
+ */
+int xb_init_comms(void)
+{
+	struct xenstore_domain_interface *intf = xen_store_interface;
+	int err;
+
+	if (intf->req_prod != intf->req_cons)
+		printk(KERN_ERR "XENBUS request ring is not quiescent "
+		       "(%08x:%08x)!\n", intf->req_cons, intf->req_prod);
+
+	if (intf->rsp_prod != intf->rsp_cons) {
+		printk(KERN_WARNING "XENBUS response ring is not quiescent "
+		       "(%08x:%08x): fixing up\n",
+		       intf->rsp_cons, intf->rsp_prod);
+		intf->rsp_cons = intf->rsp_prod;
+	}
+
+	if (xenbus_irq)
+		unbind_from_irqhandler(xenbus_irq, &xb_waitq);
+
+	err = bind_evtchn_to_irqhandler(
+		xen_store_evtchn, wake_waiting,
+		0, "xenbus", &xb_waitq);
+	if (err <= 0) {
+		printk(KERN_ERR "XENBUS request irq failed %i\n", err);
+		return err;
+	}
+
+	xenbus_irq = err;
+
+	return 0;
+}
diff --git a/drivers/xen/xenbus/xenbus_comms.h b/drivers/xen/xenbus/xenbus_comms.h
new file mode 100644
index 0000000..c21db75
--- /dev/null
+++ b/drivers/xen/xenbus/xenbus_comms.h
@@ -0,0 +1,46 @@
+/*
+ * Private include for xenbus communications.
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _XENBUS_COMMS_H
+#define _XENBUS_COMMS_H
+
+int xs_init(void);
+int xb_init_comms(void);
+
+/* Low level routines. */
+int xb_write(const void *data, unsigned len);
+int xb_read(void *data, unsigned len);
+int xb_data_to_read(void);
+int xb_wait_for_data_to_read(void);
+int xs_input_avail(void);
+extern struct xenstore_domain_interface *xen_store_interface;
+extern int xen_store_evtchn;
+
+#endif /* _XENBUS_COMMS_H */
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
new file mode 100644
index 0000000..0b769f7
--- /dev/null
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -0,0 +1,935 @@
+/******************************************************************************
+ * Talks to Xen Store to figure out what devices we have.
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ * Copyright (C) 2005 Mike Wray, Hewlett-Packard
+ * Copyright (C) 2005, 2006 XenSource Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#define DPRINTK(fmt, args...)				\
+	pr_debug("xenbus_probe (%s:%d) " fmt ".\n",	\
+		 __func__, __LINE__, ##args)
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/notifier.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/xen/hypervisor.h>
+#include <xen/xenbus.h>
+#include <xen/events.h>
+#include <xen/page.h>
+
+#include "xenbus_comms.h"
+#include "xenbus_probe.h"
+
+int xen_store_evtchn;
+struct xenstore_domain_interface *xen_store_interface;
+static unsigned long xen_store_mfn;
+
+static BLOCKING_NOTIFIER_HEAD(xenstore_chain);
+
+static void wait_for_devices(struct xenbus_driver *xendrv);
+
+static int xenbus_probe_frontend(const char *type, const char *name);
+
+static void xenbus_dev_shutdown(struct device *_dev);
+
+/* If something in array of ids matches this device, return it. */
+static const struct xenbus_device_id *
+match_device(const struct xenbus_device_id *arr, struct xenbus_device *dev)
+{
+	for (; *arr->devicetype != '\0'; arr++) {
+		if (!strcmp(arr->devicetype, dev->devicetype))
+			return arr;
+	}
+	return NULL;
+}
+
+int xenbus_match(struct device *_dev, struct device_driver *_drv)
+{
+	struct xenbus_driver *drv = to_xenbus_driver(_drv);
+
+	if (!drv->ids)
+		return 0;
+
+	return match_device(drv->ids, to_xenbus_device(_dev)) != NULL;
+}
+
+/* device/<type>/<id> => <type>-<id> */
+static int frontend_bus_id(char bus_id[BUS_ID_SIZE], const char *nodename)
+{
+	nodename = strchr(nodename, '/');
+	if (!nodename || strlen(nodename + 1) >= BUS_ID_SIZE) {
+		printk(KERN_WARNING "XENBUS: bad frontend %s\n", nodename);
+		return -EINVAL;
+	}
+
+	strlcpy(bus_id, nodename + 1, BUS_ID_SIZE);
+	if (!strchr(bus_id, '/')) {
+		printk(KERN_WARNING "XENBUS: bus_id %s no slash\n", bus_id);
+		return -EINVAL;
+	}
+	*strchr(bus_id, '/') = '-';
+	return 0;
+}
+
+
+static void free_otherend_details(struct xenbus_device *dev)
+{
+	kfree(dev->otherend);
+	dev->otherend = NULL;
+}
+
+
+static void free_otherend_watch(struct xenbus_device *dev)
+{
+	if (dev->otherend_watch.node) {
+		unregister_xenbus_watch(&dev->otherend_watch);
+		kfree(dev->otherend_watch.node);
+		dev->otherend_watch.node = NULL;
+	}
+}
+
+
+int read_otherend_details(struct xenbus_device *xendev,
+				 char *id_node, char *path_node)
+{
+	int err = xenbus_gather(XBT_NIL, xendev->nodename,
+				id_node, "%i", &xendev->otherend_id,
+				path_node, NULL, &xendev->otherend,
+				NULL);
+	if (err) {
+		xenbus_dev_fatal(xendev, err,
+				 "reading other end details from %s",
+				 xendev->nodename);
+		return err;
+	}
+	if (strlen(xendev->otherend) == 0 ||
+	    !xenbus_exists(XBT_NIL, xendev->otherend, "")) {
+		xenbus_dev_fatal(xendev, -ENOENT,
+				 "unable to read other end from %s.  "
+				 "missing or inaccessible.",
+				 xendev->nodename);
+		free_otherend_details(xendev);
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+
+static int read_backend_details(struct xenbus_device *xendev)
+{
+	return read_otherend_details(xendev, "backend-id", "backend");
+}
+
+
+/* Bus type for frontend drivers. */
+static struct xen_bus_type xenbus_frontend = {
+	.root = "device",
+	.levels = 2, 		/* device/type/<id> */
+	.get_bus_id = frontend_bus_id,
+	.probe = xenbus_probe_frontend,
+	.bus = {
+		.name     = "xen",
+		.match    = xenbus_match,
+		.probe    = xenbus_dev_probe,
+		.remove   = xenbus_dev_remove,
+		.shutdown = xenbus_dev_shutdown,
+	},
+};
+
+static void otherend_changed(struct xenbus_watch *watch,
+			     const char **vec, unsigned int len)
+{
+	struct xenbus_device *dev =
+		container_of(watch, struct xenbus_device, otherend_watch);
+	struct xenbus_driver *drv = to_xenbus_driver(dev->dev.driver);
+	enum xenbus_state state;
+
+	/* Protect us against watches firing on old details when the otherend
+	   details change, say immediately after a resume. */
+	if (!dev->otherend ||
+	    strncmp(dev->otherend, vec[XS_WATCH_PATH],
+		    strlen(dev->otherend))) {
+		dev_dbg(&dev->dev, "Ignoring watch at %s", vec[XS_WATCH_PATH]);
+		return;
+	}
+
+	state = xenbus_read_driver_state(dev->otherend);
+
+	dev_dbg(&dev->dev, "state is %d, (%s), %s, %s",
+		state, xenbus_strstate(state), dev->otherend_watch.node,
+		vec[XS_WATCH_PATH]);
+
+	/*
+	 * Ignore xenbus transitions during shutdown. This prevents us doing
+	 * work that can fail e.g., when the rootfs is gone.
+	 */
+	if (system_state > SYSTEM_RUNNING) {
+		struct xen_bus_type *bus = bus;
+		bus = container_of(dev->dev.bus, struct xen_bus_type, bus);
+		/* If we're frontend, drive the state machine to Closed. */
+		/* This should cause the backend to release our resources. */
+		if ((bus == &xenbus_frontend) && (state == XenbusStateClosing))
+			xenbus_frontend_closed(dev);
+		return;
+	}
+
+	if (drv->otherend_changed)
+		drv->otherend_changed(dev, state);
+}
+
+
+static int talk_to_otherend(struct xenbus_device *dev)
+{
+	struct xenbus_driver *drv = to_xenbus_driver(dev->dev.driver);
+
+	free_otherend_watch(dev);
+	free_otherend_details(dev);
+
+	return drv->read_otherend_details(dev);
+}
+
+
+static int watch_otherend(struct xenbus_device *dev)
+{
+	return xenbus_watch_pathfmt(dev, &dev->otherend_watch, otherend_changed,
+				    "%s/%s", dev->otherend, "state");
+}
+
+
+int xenbus_dev_probe(struct device *_dev)
+{
+	struct xenbus_device *dev = to_xenbus_device(_dev);
+	struct xenbus_driver *drv = to_xenbus_driver(_dev->driver);
+	const struct xenbus_device_id *id;
+	int err;
+
+	DPRINTK("%s", dev->nodename);
+
+	if (!drv->probe) {
+		err = -ENODEV;
+		goto fail;
+	}
+
+	id = match_device(drv->ids, dev);
+	if (!id) {
+		err = -ENODEV;
+		goto fail;
+	}
+
+	err = talk_to_otherend(dev);
+	if (err) {
+		dev_warn(&dev->dev, "talk_to_otherend on %s failed.\n",
+			 dev->nodename);
+		return err;
+	}
+
+	err = drv->probe(dev, id);
+	if (err)
+		goto fail;
+
+	err = watch_otherend(dev);
+	if (err) {
+		dev_warn(&dev->dev, "watch_otherend on %s failed.\n",
+		       dev->nodename);
+		return err;
+	}
+
+	return 0;
+fail:
+	xenbus_dev_error(dev, err, "xenbus_dev_probe on %s", dev->nodename);
+	xenbus_switch_state(dev, XenbusStateClosed);
+	return -ENODEV;
+}
+
+int xenbus_dev_remove(struct device *_dev)
+{
+	struct xenbus_device *dev = to_xenbus_device(_dev);
+	struct xenbus_driver *drv = to_xenbus_driver(_dev->driver);
+
+	DPRINTK("%s", dev->nodename);
+
+	free_otherend_watch(dev);
+	free_otherend_details(dev);
+
+	if (drv->remove)
+		drv->remove(dev);
+
+	xenbus_switch_state(dev, XenbusStateClosed);
+	return 0;
+}
+
+static void xenbus_dev_shutdown(struct device *_dev)
+{
+	struct xenbus_device *dev = to_xenbus_device(_dev);
+	unsigned long timeout = 5*HZ;
+
+	DPRINTK("%s", dev->nodename);
+
+	get_device(&dev->dev);
+	if (dev->state != XenbusStateConnected) {
+		printk(KERN_INFO "%s: %s: %s != Connected, skipping\n", __func__,
+		       dev->nodename, xenbus_strstate(dev->state));
+		goto out;
+	}
+	xenbus_switch_state(dev, XenbusStateClosing);
+	timeout = wait_for_completion_timeout(&dev->down, timeout);
+	if (!timeout)
+		printk(KERN_INFO "%s: %s timeout closing device\n",
+		       __func__, dev->nodename);
+ out:
+	put_device(&dev->dev);
+}
+
+int xenbus_register_driver_common(struct xenbus_driver *drv,
+				  struct xen_bus_type *bus,
+				  struct module *owner,
+				  const char *mod_name)
+{
+	drv->driver.name = drv->name;
+	drv->driver.bus = &bus->bus;
+	drv->driver.owner = owner;
+	drv->driver.mod_name = mod_name;
+
+	return driver_register(&drv->driver);
+}
+
+int __xenbus_register_frontend(struct xenbus_driver *drv,
+			       struct module *owner, const char *mod_name)
+{
+	int ret;
+
+	drv->read_otherend_details = read_backend_details;
+
+	ret = xenbus_register_driver_common(drv, &xenbus_frontend,
+					    owner, mod_name);
+	if (ret)
+		return ret;
+
+	/* If this driver is loaded as a module wait for devices to attach. */
+	wait_for_devices(drv);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__xenbus_register_frontend);
+
+void xenbus_unregister_driver(struct xenbus_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(xenbus_unregister_driver);
+
+struct xb_find_info
+{
+	struct xenbus_device *dev;
+	const char *nodename;
+};
+
+static int cmp_dev(struct device *dev, void *data)
+{
+	struct xenbus_device *xendev = to_xenbus_device(dev);
+	struct xb_find_info *info = data;
+
+	if (!strcmp(xendev->nodename, info->nodename)) {
+		info->dev = xendev;
+		get_device(dev);
+		return 1;
+	}
+	return 0;
+}
+
+struct xenbus_device *xenbus_device_find(const char *nodename,
+					 struct bus_type *bus)
+{
+	struct xb_find_info info = { .dev = NULL, .nodename = nodename };
+
+	bus_for_each_dev(bus, NULL, &info, cmp_dev);
+	return info.dev;
+}
+
+static int cleanup_dev(struct device *dev, void *data)
+{
+	struct xenbus_device *xendev = to_xenbus_device(dev);
+	struct xb_find_info *info = data;
+	int len = strlen(info->nodename);
+
+	DPRINTK("%s", info->nodename);
+
+	/* Match the info->nodename path, or any subdirectory of that path. */
+	if (strncmp(xendev->nodename, info->nodename, len))
+		return 0;
+
+	/* If the node name is longer, ensure it really is a subdirectory. */
+	if ((strlen(xendev->nodename) > len) && (xendev->nodename[len] != '/'))
+		return 0;
+
+	info->dev = xendev;
+	get_device(dev);
+	return 1;
+}
+
+static void xenbus_cleanup_devices(const char *path, struct bus_type *bus)
+{
+	struct xb_find_info info = { .nodename = path };
+
+	do {
+		info.dev = NULL;
+		bus_for_each_dev(bus, NULL, &info, cleanup_dev);
+		if (info.dev) {
+			device_unregister(&info.dev->dev);
+			put_device(&info.dev->dev);
+		}
+	} while (info.dev);
+}
+
+static void xenbus_dev_release(struct device *dev)
+{
+	if (dev)
+		kfree(to_xenbus_device(dev));
+}
+
+static ssize_t xendev_show_nodename(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n", to_xenbus_device(dev)->nodename);
+}
+DEVICE_ATTR(nodename, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_nodename, NULL);
+
+static ssize_t xendev_show_devtype(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n", to_xenbus_device(dev)->devicetype);
+}
+DEVICE_ATTR(devtype, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_devtype, NULL);
+
+
+int xenbus_probe_node(struct xen_bus_type *bus,
+		      const char *type,
+		      const char *nodename)
+{
+	int err;
+	struct xenbus_device *xendev;
+	size_t stringlen;
+	char *tmpstring;
+
+	enum xenbus_state state = xenbus_read_driver_state(nodename);
+
+	if (state != XenbusStateInitialising) {
+		/* Device is not new, so ignore it.  This can happen if a
+		   device is going away after switching to Closed.  */
+		return 0;
+	}
+
+	stringlen = strlen(nodename) + 1 + strlen(type) + 1;
+	xendev = kzalloc(sizeof(*xendev) + stringlen, GFP_KERNEL);
+	if (!xendev)
+		return -ENOMEM;
+
+	xendev->state = XenbusStateInitialising;
+
+	/* Copy the strings into the extra space. */
+
+	tmpstring = (char *)(xendev + 1);
+	strcpy(tmpstring, nodename);
+	xendev->nodename = tmpstring;
+
+	tmpstring += strlen(tmpstring) + 1;
+	strcpy(tmpstring, type);
+	xendev->devicetype = tmpstring;
+	init_completion(&xendev->down);
+
+	xendev->dev.bus = &bus->bus;
+	xendev->dev.release = xenbus_dev_release;
+
+	err = bus->get_bus_id(xendev->dev.bus_id, xendev->nodename);
+	if (err)
+		goto fail;
+
+	/* Register with generic device framework. */
+	err = device_register(&xendev->dev);
+	if (err)
+		goto fail;
+
+	err = device_create_file(&xendev->dev, &dev_attr_nodename);
+	if (err)
+		goto fail_unregister;
+
+	err = device_create_file(&xendev->dev, &dev_attr_devtype);
+	if (err)
+		goto fail_remove_file;
+
+	return 0;
+fail_remove_file:
+	device_remove_file(&xendev->dev, &dev_attr_nodename);
+fail_unregister:
+	device_unregister(&xendev->dev);
+fail:
+	kfree(xendev);
+	return err;
+}
+
+/* device/<typename>/<name> */
+static int xenbus_probe_frontend(const char *type, const char *name)
+{
+	char *nodename;
+	int err;
+
+	nodename = kasprintf(GFP_KERNEL, "%s/%s/%s",
+			     xenbus_frontend.root, type, name);
+	if (!nodename)
+		return -ENOMEM;
+
+	DPRINTK("%s", nodename);
+
+	err = xenbus_probe_node(&xenbus_frontend, type, nodename);
+	kfree(nodename);
+	return err;
+}
+
+static int xenbus_probe_device_type(struct xen_bus_type *bus, const char *type)
+{
+	int err = 0;
+	char **dir;
+	unsigned int dir_n = 0;
+	int i;
+
+	dir = xenbus_directory(XBT_NIL, bus->root, type, &dir_n);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+
+	for (i = 0; i < dir_n; i++) {
+		err = bus->probe(type, dir[i]);
+		if (err)
+			break;
+	}
+	kfree(dir);
+	return err;
+}
+
+int xenbus_probe_devices(struct xen_bus_type *bus)
+{
+	int err = 0;
+	char **dir;
+	unsigned int i, dir_n;
+
+	dir = xenbus_directory(XBT_NIL, bus->root, "", &dir_n);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+
+	for (i = 0; i < dir_n; i++) {
+		err = xenbus_probe_device_type(bus, dir[i]);
+		if (err)
+			break;
+	}
+	kfree(dir);
+	return err;
+}
+
+static unsigned int char_count(const char *str, char c)
+{
+	unsigned int i, ret = 0;
+
+	for (i = 0; str[i]; i++)
+		if (str[i] == c)
+			ret++;
+	return ret;
+}
+
+static int strsep_len(const char *str, char c, unsigned int len)
+{
+	unsigned int i;
+
+	for (i = 0; str[i]; i++)
+		if (str[i] == c) {
+			if (len == 0)
+				return i;
+			len--;
+		}
+	return (len == 0) ? i : -ERANGE;
+}
+
+void xenbus_dev_changed(const char *node, struct xen_bus_type *bus)
+{
+	int exists, rootlen;
+	struct xenbus_device *dev;
+	char type[BUS_ID_SIZE];
+	const char *p, *root;
+
+	if (char_count(node, '/') < 2)
+		return;
+
+	exists = xenbus_exists(XBT_NIL, node, "");
+	if (!exists) {
+		xenbus_cleanup_devices(node, &bus->bus);
+		return;
+	}
+
+	/* backend/<type>/... or device/<type>/... */
+	p = strchr(node, '/') + 1;
+	snprintf(type, BUS_ID_SIZE, "%.*s", (int)strcspn(p, "/"), p);
+	type[BUS_ID_SIZE-1] = '\0';
+
+	rootlen = strsep_len(node, '/', bus->levels);
+	if (rootlen < 0)
+		return;
+	root = kasprintf(GFP_KERNEL, "%.*s", rootlen, node);
+	if (!root)
+		return;
+
+	dev = xenbus_device_find(root, &bus->bus);
+	if (!dev)
+		xenbus_probe_node(bus, type, root);
+	else
+		put_device(&dev->dev);
+
+	kfree(root);
+}
+
+static void frontend_changed(struct xenbus_watch *watch,
+			     const char **vec, unsigned int len)
+{
+	DPRINTK("");
+
+	xenbus_dev_changed(vec[XS_WATCH_PATH], &xenbus_frontend);
+}
+
+/* We watch for devices appearing and vanishing. */
+static struct xenbus_watch fe_watch = {
+	.node = "device",
+	.callback = frontend_changed,
+};
+
+static int suspend_dev(struct device *dev, void *data)
+{
+	int err = 0;
+	struct xenbus_driver *drv;
+	struct xenbus_device *xdev;
+
+	DPRINTK("");
+
+	if (dev->driver == NULL)
+		return 0;
+	drv = to_xenbus_driver(dev->driver);
+	xdev = container_of(dev, struct xenbus_device, dev);
+	if (drv->suspend)
+		err = drv->suspend(xdev);
+	if (err)
+		printk(KERN_WARNING
+		       "xenbus: suspend %s failed: %i\n", dev->bus_id, err);
+	return 0;
+}
+
+static int suspend_cancel_dev(struct device *dev, void *data)
+{
+	int err = 0;
+	struct xenbus_driver *drv;
+	struct xenbus_device *xdev;
+
+	DPRINTK("");
+
+	if (dev->driver == NULL)
+		return 0;
+	drv = to_xenbus_driver(dev->driver);
+	xdev = container_of(dev, struct xenbus_device, dev);
+	if (drv->suspend_cancel)
+		err = drv->suspend_cancel(xdev);
+	if (err)
+		printk(KERN_WARNING
+		       "xenbus: suspend_cancel %s failed: %i\n",
+		       dev->bus_id, err);
+	return 0;
+}
+
+static int resume_dev(struct device *dev, void *data)
+{
+	int err;
+	struct xenbus_driver *drv;
+	struct xenbus_device *xdev;
+
+	DPRINTK("");
+
+	if (dev->driver == NULL)
+		return 0;
+
+	drv = to_xenbus_driver(dev->driver);
+	xdev = container_of(dev, struct xenbus_device, dev);
+
+	err = talk_to_otherend(xdev);
+	if (err) {
+		printk(KERN_WARNING
+		       "xenbus: resume (talk_to_otherend) %s failed: %i\n",
+		       dev->bus_id, err);
+		return err;
+	}
+
+	xdev->state = XenbusStateInitialising;
+
+	if (drv->resume) {
+		err = drv->resume(xdev);
+		if (err) {
+			printk(KERN_WARNING
+			       "xenbus: resume %s failed: %i\n",
+			       dev->bus_id, err);
+			return err;
+		}
+	}
+
+	err = watch_otherend(xdev);
+	if (err) {
+		printk(KERN_WARNING
+		       "xenbus_probe: resume (watch_otherend) %s failed: "
+		       "%d.\n", dev->bus_id, err);
+		return err;
+	}
+
+	return 0;
+}
+
+void xenbus_suspend(void)
+{
+	DPRINTK("");
+
+	bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, suspend_dev);
+	xenbus_backend_suspend(suspend_dev);
+	xs_suspend();
+}
+EXPORT_SYMBOL_GPL(xenbus_suspend);
+
+void xenbus_resume(void)
+{
+	xb_init_comms();
+	xs_resume();
+	bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, resume_dev);
+	xenbus_backend_resume(resume_dev);
+}
+EXPORT_SYMBOL_GPL(xenbus_resume);
+
+void xenbus_suspend_cancel(void)
+{
+	xs_suspend_cancel();
+	bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, suspend_cancel_dev);
+	xenbus_backend_resume(suspend_cancel_dev);
+}
+EXPORT_SYMBOL_GPL(xenbus_suspend_cancel);
+
+/* A flag to determine if xenstored is 'ready' (i.e. has started) */
+int xenstored_ready = 0;
+
+
+int register_xenstore_notifier(struct notifier_block *nb)
+{
+	int ret = 0;
+
+	if (xenstored_ready > 0)
+		ret = nb->notifier_call(nb, 0, NULL);
+	else
+		blocking_notifier_chain_register(&xenstore_chain, nb);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(register_xenstore_notifier);
+
+void unregister_xenstore_notifier(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&xenstore_chain, nb);
+}
+EXPORT_SYMBOL_GPL(unregister_xenstore_notifier);
+
+void xenbus_probe(struct work_struct *unused)
+{
+	BUG_ON((xenstored_ready <= 0));
+
+	/* Enumerate devices in xenstore and watch for changes. */
+	xenbus_probe_devices(&xenbus_frontend);
+	register_xenbus_watch(&fe_watch);
+	xenbus_backend_probe_and_watch();
+
+	/* Notify others that xenstore is up */
+	blocking_notifier_call_chain(&xenstore_chain, 0, NULL);
+}
+
+static int __init xenbus_probe_init(void)
+{
+	int err = 0;
+
+	DPRINTK("");
+
+	err = -ENODEV;
+	if (!is_running_on_xen())
+		goto out_error;
+
+	/* Register ourselves with the kernel bus subsystem */
+	err = bus_register(&xenbus_frontend.bus);
+	if (err)
+		goto out_error;
+
+	err = xenbus_backend_bus_register();
+	if (err)
+		goto out_unreg_front;
+
+	/*
+	 * Domain0 doesn't have a store_evtchn or store_mfn yet.
+	 */
+	if (is_initial_xendomain()) {
+		/* dom0 not yet supported */
+	} else {
+		xenstored_ready = 1;
+		xen_store_evtchn = xen_start_info->store_evtchn;
+		xen_store_mfn = xen_start_info->store_mfn;
+	}
+	xen_store_interface = mfn_to_virt(xen_store_mfn);
+
+	/* Initialize the interface to xenstore. */
+	err = xs_init();
+	if (err) {
+		printk(KERN_WARNING
+		       "XENBUS: Error initializing xenstore comms: %i\n", err);
+		goto out_unreg_back;
+	}
+
+	if (!is_initial_xendomain())
+		xenbus_probe(NULL);
+
+	return 0;
+
+  out_unreg_back:
+	xenbus_backend_bus_unregister();
+
+  out_unreg_front:
+	bus_unregister(&xenbus_frontend.bus);
+
+  out_error:
+	return err;
+}
+
+postcore_initcall(xenbus_probe_init);
+
+MODULE_LICENSE("GPL");
+
+static int is_disconnected_device(struct device *dev, void *data)
+{
+	struct xenbus_device *xendev = to_xenbus_device(dev);
+	struct device_driver *drv = data;
+
+	/*
+	 * A device with no driver will never connect. We care only about
+	 * devices which should currently be in the process of connecting.
+	 */
+	if (!dev->driver)
+		return 0;
+
+	/* Is this search limited to a particular driver? */
+	if (drv && (dev->driver != drv))
+		return 0;
+
+	return (xendev->state != XenbusStateConnected);
+}
+
+static int exists_disconnected_device(struct device_driver *drv)
+{
+	return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
+				is_disconnected_device);
+}
+
+static int print_device_status(struct device *dev, void *data)
+{
+	struct xenbus_device *xendev = to_xenbus_device(dev);
+	struct device_driver *drv = data;
+
+	/* Is this operation limited to a particular driver? */
+	if (drv && (dev->driver != drv))
+		return 0;
+
+	if (!dev->driver) {
+		/* Information only: is this too noisy? */
+		printk(KERN_INFO "XENBUS: Device with no driver: %s\n",
+		       xendev->nodename);
+	} else if (xendev->state != XenbusStateConnected) {
+		printk(KERN_WARNING "XENBUS: Timeout connecting "
+		       "to device: %s (state %d)\n",
+		       xendev->nodename, xendev->state);
+	}
+
+	return 0;
+}
+
+/* We only wait for device setup after most initcalls have run. */
+static int ready_to_wait_for_devices;
+
+/*
+ * On a 10 second timeout, wait for all devices currently configured.  We need
+ * to do this to guarantee that the filesystems and / or network devices
+ * needed for boot are available, before we can allow the boot to proceed.
+ *
+ * This needs to be on a late_initcall, to happen after the frontend device
+ * drivers have been initialised, but before the root fs is mounted.
+ *
+ * A possible improvement here would be to have the tools add a per-device
+ * flag to the store entry, indicating whether it is needed at boot time.
+ * This would allow people who knew what they were doing to accelerate their
+ * boot slightly, but of course needs tools or manual intervention to set up
+ * those flags correctly.
+ */
+static void wait_for_devices(struct xenbus_driver *xendrv)
+{
+	unsigned long timeout = jiffies + 10*HZ;
+	struct device_driver *drv = xendrv ? &xendrv->driver : NULL;
+
+	if (!ready_to_wait_for_devices || !is_running_on_xen())
+		return;
+
+	while (exists_disconnected_device(drv)) {
+		if (time_after(jiffies, timeout))
+			break;
+		schedule_timeout_interruptible(HZ/10);
+	}
+
+	bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
+			 print_device_status);
+}
+
+#ifndef MODULE
+static int __init boot_wait_for_devices(void)
+{
+	ready_to_wait_for_devices = 1;
+	wait_for_devices(NULL);
+	return 0;
+}
+
+late_initcall(boot_wait_for_devices);
+#endif
diff --git a/drivers/xen/xenbus/xenbus_probe.h b/drivers/xen/xenbus/xenbus_probe.h
new file mode 100644
index 0000000..e09b194
--- /dev/null
+++ b/drivers/xen/xenbus/xenbus_probe.h
@@ -0,0 +1,74 @@
+/******************************************************************************
+ * xenbus_probe.h
+ *
+ * Talks to Xen Store to figure out what devices we have.
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ * Copyright (C) 2005 XenSource Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _XENBUS_PROBE_H
+#define _XENBUS_PROBE_H
+
+#ifdef CONFIG_XEN_BACKEND
+extern void xenbus_backend_suspend(int (*fn)(struct device *, void *));
+extern void xenbus_backend_resume(int (*fn)(struct device *, void *));
+extern void xenbus_backend_probe_and_watch(void);
+extern int xenbus_backend_bus_register(void);
+extern void xenbus_backend_bus_unregister(void);
+#else
+static inline void xenbus_backend_suspend(int (*fn)(struct device *, void *)) {}
+static inline void xenbus_backend_resume(int (*fn)(struct device *, void *)) {}
+static inline void xenbus_backend_probe_and_watch(void) {}
+static inline int xenbus_backend_bus_register(void) { return 0; }
+static inline void xenbus_backend_bus_unregister(void) {}
+#endif
+
+struct xen_bus_type
+{
+	char *root;
+	unsigned int levels;
+	int (*get_bus_id)(char bus_id[BUS_ID_SIZE], const char *nodename);
+	int (*probe)(const char *type, const char *dir);
+	struct bus_type bus;
+};
+
+extern int xenbus_match(struct device *_dev, struct device_driver *_drv);
+extern int xenbus_dev_probe(struct device *_dev);
+extern int xenbus_dev_remove(struct device *_dev);
+extern int xenbus_register_driver_common(struct xenbus_driver *drv,
+					 struct xen_bus_type *bus,
+					 struct module *owner,
+					 const char *mod_name);
+extern int xenbus_probe_node(struct xen_bus_type *bus,
+			     const char *type,
+			     const char *nodename);
+extern int xenbus_probe_devices(struct xen_bus_type *bus);
+
+extern void xenbus_dev_changed(const char *node, struct xen_bus_type *bus);
+
+#endif
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
new file mode 100644
index 0000000..9e943fb
--- /dev/null
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -0,0 +1,861 @@
+/******************************************************************************
+ * xenbus_xs.c
+ *
+ * This is the kernel equivalent of the "xs" library.  We don't need everything
+ * and we use xenbus_comms for communication.
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <linux/unistd.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/uio.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/fcntl.h>
+#include <linux/kthread.h>
+#include <linux/rwsem.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <xen/xenbus.h>
+#include "xenbus_comms.h"
+
+struct xs_stored_msg {
+	struct list_head list;
+
+	struct xsd_sockmsg hdr;
+
+	union {
+		/* Queued replies. */
+		struct {
+			char *body;
+		} reply;
+
+		/* Queued watch events. */
+		struct {
+			struct xenbus_watch *handle;
+			char **vec;
+			unsigned int vec_size;
+		} watch;
+	} u;
+};
+
+struct xs_handle {
+	/* A list of replies. Currently only one will ever be outstanding. */
+	struct list_head reply_list;
+	spinlock_t reply_lock;
+	wait_queue_head_t reply_waitq;
+
+	/*
+	 * Mutex ordering: transaction_mutex -> watch_mutex -> request_mutex.
+	 * response_mutex is never taken simultaneously with the other three.
+	 */
+
+	/* One request at a time. */
+	struct mutex request_mutex;
+
+	/* Protect xenbus reader thread against save/restore. */
+	struct mutex response_mutex;
+
+	/* Protect transactions against save/restore. */
+	struct rw_semaphore transaction_mutex;
+
+	/* Protect watch (de)register against save/restore. */
+	struct rw_semaphore watch_mutex;
+};
+
+static struct xs_handle xs_state;
+
+/* List of registered watches, and a lock to protect it. */
+static LIST_HEAD(watches);
+static DEFINE_SPINLOCK(watches_lock);
+
+/* List of pending watch callback events, and a lock to protect it. */
+static LIST_HEAD(watch_events);
+static DEFINE_SPINLOCK(watch_events_lock);
+
+/*
+ * Details of the xenwatch callback kernel thread. The thread waits on the
+ * watch_events_waitq for work to do (queued on watch_events list). When it
+ * wakes up it acquires the xenwatch_mutex before reading the list and
+ * carrying out work.
+ */
+static pid_t xenwatch_pid;
+static DEFINE_MUTEX(xenwatch_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(watch_events_waitq);
+
+static int get_error(const char *errorstring)
+{
+	unsigned int i;
+
+	for (i = 0; strcmp(errorstring, xsd_errors[i].errstring) != 0; i++) {
+		if (i == ARRAY_SIZE(xsd_errors) - 1) {
+			printk(KERN_WARNING
+			       "XENBUS xen store gave: unknown error %s",
+			       errorstring);
+			return EINVAL;
+		}
+	}
+	return xsd_errors[i].errnum;
+}
+
+static void *read_reply(enum xsd_sockmsg_type *type, unsigned int *len)
+{
+	struct xs_stored_msg *msg;
+	char *body;
+
+	spin_lock(&xs_state.reply_lock);
+
+	while (list_empty(&xs_state.reply_list)) {
+		spin_unlock(&xs_state.reply_lock);
+		/* XXX FIXME: Avoid synchronous wait for response here. */
+		wait_event(xs_state.reply_waitq,
+			   !list_empty(&xs_state.reply_list));
+		spin_lock(&xs_state.reply_lock);
+	}
+
+	msg = list_entry(xs_state.reply_list.next,
+			 struct xs_stored_msg, list);
+	list_del(&msg->list);
+
+	spin_unlock(&xs_state.reply_lock);
+
+	*type = msg->hdr.type;
+	if (len)
+		*len = msg->hdr.len;
+	body = msg->u.reply.body;
+
+	kfree(msg);
+
+	return body;
+}
+
+void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg)
+{
+	void *ret;
+	struct xsd_sockmsg req_msg = *msg;
+	int err;
+
+	if (req_msg.type == XS_TRANSACTION_START)
+		down_read(&xs_state.transaction_mutex);
+
+	mutex_lock(&xs_state.request_mutex);
+
+	err = xb_write(msg, sizeof(*msg) + msg->len);
+	if (err) {
+		msg->type = XS_ERROR;
+		ret = ERR_PTR(err);
+	} else
+		ret = read_reply(&msg->type, &msg->len);
+
+	mutex_unlock(&xs_state.request_mutex);
+
+	if ((msg->type == XS_TRANSACTION_END) ||
+	    ((req_msg.type == XS_TRANSACTION_START) &&
+	     (msg->type == XS_ERROR)))
+		up_read(&xs_state.transaction_mutex);
+
+	return ret;
+}
+
+/* Send message to xs, get kmalloc'ed reply.  ERR_PTR() on error. */
+static void *xs_talkv(struct xenbus_transaction t,
+		      enum xsd_sockmsg_type type,
+		      const struct kvec *iovec,
+		      unsigned int num_vecs,
+		      unsigned int *len)
+{
+	struct xsd_sockmsg msg;
+	void *ret = NULL;
+	unsigned int i;
+	int err;
+
+	msg.tx_id = t.id;
+	msg.req_id = 0;
+	msg.type = type;
+	msg.len = 0;
+	for (i = 0; i < num_vecs; i++)
+		msg.len += iovec[i].iov_len;
+
+	mutex_lock(&xs_state.request_mutex);
+
+	err = xb_write(&msg, sizeof(msg));
+	if (err) {
+		mutex_unlock(&xs_state.request_mutex);
+		return ERR_PTR(err);
+	}
+
+	for (i = 0; i < num_vecs; i++) {
+		err = xb_write(iovec[i].iov_base, iovec[i].iov_len);
+		if (err) {
+			mutex_unlock(&xs_state.request_mutex);
+			return ERR_PTR(err);
+		}
+	}
+
+	ret = read_reply(&msg.type, len);
+
+	mutex_unlock(&xs_state.request_mutex);
+
+	if (IS_ERR(ret))
+		return ret;
+
+	if (msg.type == XS_ERROR) {
+		err = get_error(ret);
+		kfree(ret);
+		return ERR_PTR(-err);
+	}
+
+	if (msg.type != type) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING
+			       "XENBUS unexpected type [%d], expected [%d]\n",
+			       msg.type, type);
+		kfree(ret);
+		return ERR_PTR(-EINVAL);
+	}
+	return ret;
+}
+
+/* Simplified version of xs_talkv: single message. */
+static void *xs_single(struct xenbus_transaction t,
+		       enum xsd_sockmsg_type type,
+		       const char *string,
+		       unsigned int *len)
+{
+	struct kvec iovec;
+
+	iovec.iov_base = (void *)string;
+	iovec.iov_len = strlen(string) + 1;
+	return xs_talkv(t, type, &iovec, 1, len);
+}
+
+/* Many commands only need an ack, don't care what it says. */
+static int xs_error(char *reply)
+{
+	if (IS_ERR(reply))
+		return PTR_ERR(reply);
+	kfree(reply);
+	return 0;
+}
+
+static unsigned int count_strings(const char *strings, unsigned int len)
+{
+	unsigned int num;
+	const char *p;
+
+	for (p = strings, num = 0; p < strings + len; p += strlen(p) + 1)
+		num++;
+
+	return num;
+}
+
+/* Return the path to dir with /name appended. Buffer must be kfree()'ed. */
+static char *join(const char *dir, const char *name)
+{
+	char *buffer;
+
+	if (strlen(name) == 0)
+		buffer = kasprintf(GFP_KERNEL, "%s", dir);
+	else
+		buffer = kasprintf(GFP_KERNEL, "%s/%s", dir, name);
+	return (!buffer) ? ERR_PTR(-ENOMEM) : buffer;
+}
+
+static char **split(char *strings, unsigned int len, unsigned int *num)
+{
+	char *p, **ret;
+
+	/* Count the strings. */
+	*num = count_strings(strings, len);
+
+	/* Transfer to one big alloc for easy freeing. */
+	ret = kmalloc(*num * sizeof(char *) + len, GFP_KERNEL);
+	if (!ret) {
+		kfree(strings);
+		return ERR_PTR(-ENOMEM);
+	}
+	memcpy(&ret[*num], strings, len);
+	kfree(strings);
+
+	strings = (char *)&ret[*num];
+	for (p = strings, *num = 0; p < strings + len; p += strlen(p) + 1)
+		ret[(*num)++] = p;
+
+	return ret;
+}
+
+char **xenbus_directory(struct xenbus_transaction t,
+			const char *dir, const char *node, unsigned int *num)
+{
+	char *strings, *path;
+	unsigned int len;
+
+	path = join(dir, node);
+	if (IS_ERR(path))
+		return (char **)path;
+
+	strings = xs_single(t, XS_DIRECTORY, path, &len);
+	kfree(path);
+	if (IS_ERR(strings))
+		return (char **)strings;
+
+	return split(strings, len, num);
+}
+EXPORT_SYMBOL_GPL(xenbus_directory);
+
+/* Check if a path exists. Return 1 if it does. */
+int xenbus_exists(struct xenbus_transaction t,
+		  const char *dir, const char *node)
+{
+	char **d;
+	int dir_n;
+
+	d = xenbus_directory(t, dir, node, &dir_n);
+	if (IS_ERR(d))
+		return 0;
+	kfree(d);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(xenbus_exists);
+
+/* Get the value of a single file.
+ * Returns a kmalloced value: call free() on it after use.
+ * len indicates length in bytes.
+ */
+void *xenbus_read(struct xenbus_transaction t,
+		  const char *dir, const char *node, unsigned int *len)
+{
+	char *path;
+	void *ret;
+
+	path = join(dir, node);
+	if (IS_ERR(path))
+		return (void *)path;
+
+	ret = xs_single(t, XS_READ, path, len);
+	kfree(path);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xenbus_read);
+
+/* Write the value of a single file.
+ * Returns -err on failure.
+ */
+int xenbus_write(struct xenbus_transaction t,
+		 const char *dir, const char *node, const char *string)
+{
+	const char *path;
+	struct kvec iovec[2];
+	int ret;
+
+	path = join(dir, node);
+	if (IS_ERR(path))
+		return PTR_ERR(path);
+
+	iovec[0].iov_base = (void *)path;
+	iovec[0].iov_len = strlen(path) + 1;
+	iovec[1].iov_base = (void *)string;
+	iovec[1].iov_len = strlen(string);
+
+	ret = xs_error(xs_talkv(t, XS_WRITE, iovec, ARRAY_SIZE(iovec), NULL));
+	kfree(path);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xenbus_write);
+
+/* Create a new directory. */
+int xenbus_mkdir(struct xenbus_transaction t,
+		 const char *dir, const char *node)
+{
+	char *path;
+	int ret;
+
+	path = join(dir, node);
+	if (IS_ERR(path))
+		return PTR_ERR(path);
+
+	ret = xs_error(xs_single(t, XS_MKDIR, path, NULL));
+	kfree(path);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xenbus_mkdir);
+
+/* Destroy a file or directory (directories must be empty). */
+int xenbus_rm(struct xenbus_transaction t, const char *dir, const char *node)
+{
+	char *path;
+	int ret;
+
+	path = join(dir, node);
+	if (IS_ERR(path))
+		return PTR_ERR(path);
+
+	ret = xs_error(xs_single(t, XS_RM, path, NULL));
+	kfree(path);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xenbus_rm);
+
+/* Start a transaction: changes by others will not be seen during this
+ * transaction, and changes will not be visible to others until end.
+ */
+int xenbus_transaction_start(struct xenbus_transaction *t)
+{
+	char *id_str;
+
+	down_read(&xs_state.transaction_mutex);
+
+	id_str = xs_single(XBT_NIL, XS_TRANSACTION_START, "", NULL);
+	if (IS_ERR(id_str)) {
+		up_read(&xs_state.transaction_mutex);
+		return PTR_ERR(id_str);
+	}
+
+	t->id = simple_strtoul(id_str, NULL, 0);
+	kfree(id_str);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xenbus_transaction_start);
+
+/* End a transaction.
+ * If abandon is true, transaction is discarded instead of committed.
+ */
+int xenbus_transaction_end(struct xenbus_transaction t, int abort)
+{
+	char abortstr[2];
+	int err;
+
+	if (abort)
+		strcpy(abortstr, "F");
+	else
+		strcpy(abortstr, "T");
+
+	err = xs_error(xs_single(t, XS_TRANSACTION_END, abortstr, NULL));
+
+	up_read(&xs_state.transaction_mutex);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(xenbus_transaction_end);
+
+/* Single read and scanf: returns -errno or num scanned. */
+int xenbus_scanf(struct xenbus_transaction t,
+		 const char *dir, const char *node, const char *fmt, ...)
+{
+	va_list ap;
+	int ret;
+	char *val;
+
+	val = xenbus_read(t, dir, node, NULL);
+	if (IS_ERR(val))
+		return PTR_ERR(val);
+
+	va_start(ap, fmt);
+	ret = vsscanf(val, fmt, ap);
+	va_end(ap);
+	kfree(val);
+	/* Distinctive errno. */
+	if (ret == 0)
+		return -ERANGE;
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xenbus_scanf);
+
+/* Single printf and write: returns -errno or 0. */
+int xenbus_printf(struct xenbus_transaction t,
+		  const char *dir, const char *node, const char *fmt, ...)
+{
+	va_list ap;
+	int ret;
+#define PRINTF_BUFFER_SIZE 4096
+	char *printf_buffer;
+
+	printf_buffer = kmalloc(PRINTF_BUFFER_SIZE, GFP_KERNEL);
+	if (printf_buffer == NULL)
+		return -ENOMEM;
+
+	va_start(ap, fmt);
+	ret = vsnprintf(printf_buffer, PRINTF_BUFFER_SIZE, fmt, ap);
+	va_end(ap);
+
+	BUG_ON(ret > PRINTF_BUFFER_SIZE-1);
+	ret = xenbus_write(t, dir, node, printf_buffer);
+
+	kfree(printf_buffer);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xenbus_printf);
+
+/* Takes tuples of names, scanf-style args, and void **, NULL terminated. */
+int xenbus_gather(struct xenbus_transaction t, const char *dir, ...)
+{
+	va_list ap;
+	const char *name;
+	int ret = 0;
+
+	va_start(ap, dir);
+	while (ret == 0 && (name = va_arg(ap, char *)) != NULL) {
+		const char *fmt = va_arg(ap, char *);
+		void *result = va_arg(ap, void *);
+		char *p;
+
+		p = xenbus_read(t, dir, name, NULL);
+		if (IS_ERR(p)) {
+			ret = PTR_ERR(p);
+			break;
+		}
+		if (fmt) {
+			if (sscanf(p, fmt, result) == 0)
+				ret = -EINVAL;
+			kfree(p);
+		} else
+			*(char **)result = p;
+	}
+	va_end(ap);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xenbus_gather);
+
+static int xs_watch(const char *path, const char *token)
+{
+	struct kvec iov[2];
+
+	iov[0].iov_base = (void *)path;
+	iov[0].iov_len = strlen(path) + 1;
+	iov[1].iov_base = (void *)token;
+	iov[1].iov_len = strlen(token) + 1;
+
+	return xs_error(xs_talkv(XBT_NIL, XS_WATCH, iov,
+				 ARRAY_SIZE(iov), NULL));
+}
+
+static int xs_unwatch(const char *path, const char *token)
+{
+	struct kvec iov[2];
+
+	iov[0].iov_base = (char *)path;
+	iov[0].iov_len = strlen(path) + 1;
+	iov[1].iov_base = (char *)token;
+	iov[1].iov_len = strlen(token) + 1;
+
+	return xs_error(xs_talkv(XBT_NIL, XS_UNWATCH, iov,
+				 ARRAY_SIZE(iov), NULL));
+}
+
+static struct xenbus_watch *find_watch(const char *token)
+{
+	struct xenbus_watch *i, *cmp;
+
+	cmp = (void *)simple_strtoul(token, NULL, 16);
+
+	list_for_each_entry(i, &watches, list)
+		if (i == cmp)
+			return i;
+
+	return NULL;
+}
+
+/* Register callback to watch this node. */
+int register_xenbus_watch(struct xenbus_watch *watch)
+{
+	/* Pointer in ascii is the token. */
+	char token[sizeof(watch) * 2 + 1];
+	int err;
+
+	sprintf(token, "%lX", (long)watch);
+
+	down_read(&xs_state.watch_mutex);
+
+	spin_lock(&watches_lock);
+	BUG_ON(find_watch(token));
+	list_add(&watch->list, &watches);
+	spin_unlock(&watches_lock);
+
+	err = xs_watch(watch->node, token);
+
+	/* Ignore errors due to multiple registration. */
+	if ((err != 0) && (err != -EEXIST)) {
+		spin_lock(&watches_lock);
+		list_del(&watch->list);
+		spin_unlock(&watches_lock);
+	}
+
+	up_read(&xs_state.watch_mutex);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(register_xenbus_watch);
+
+void unregister_xenbus_watch(struct xenbus_watch *watch)
+{
+	struct xs_stored_msg *msg, *tmp;
+	char token[sizeof(watch) * 2 + 1];
+	int err;
+
+	sprintf(token, "%lX", (long)watch);
+
+	down_read(&xs_state.watch_mutex);
+
+	spin_lock(&watches_lock);
+	BUG_ON(!find_watch(token));
+	list_del(&watch->list);
+	spin_unlock(&watches_lock);
+
+	err = xs_unwatch(watch->node, token);
+	if (err)
+		printk(KERN_WARNING
+		       "XENBUS Failed to release watch %s: %i\n",
+		       watch->node, err);
+
+	up_read(&xs_state.watch_mutex);
+
+	/* Make sure there are no callbacks running currently (unless
+	   its us) */
+	if (current->pid != xenwatch_pid)
+		mutex_lock(&xenwatch_mutex);
+
+	/* Cancel pending watch events. */
+	spin_lock(&watch_events_lock);
+	list_for_each_entry_safe(msg, tmp, &watch_events, list) {
+		if (msg->u.watch.handle != watch)
+			continue;
+		list_del(&msg->list);
+		kfree(msg->u.watch.vec);
+		kfree(msg);
+	}
+	spin_unlock(&watch_events_lock);
+
+	if (current->pid != xenwatch_pid)
+		mutex_unlock(&xenwatch_mutex);
+}
+EXPORT_SYMBOL_GPL(unregister_xenbus_watch);
+
+void xs_suspend(void)
+{
+	down_write(&xs_state.transaction_mutex);
+	down_write(&xs_state.watch_mutex);
+	mutex_lock(&xs_state.request_mutex);
+	mutex_lock(&xs_state.response_mutex);
+}
+
+void xs_resume(void)
+{
+	struct xenbus_watch *watch;
+	char token[sizeof(watch) * 2 + 1];
+
+	mutex_unlock(&xs_state.response_mutex);
+	mutex_unlock(&xs_state.request_mutex);
+	up_write(&xs_state.transaction_mutex);
+
+	/* No need for watches_lock: the watch_mutex is sufficient. */
+	list_for_each_entry(watch, &watches, list) {
+		sprintf(token, "%lX", (long)watch);
+		xs_watch(watch->node, token);
+	}
+
+	up_write(&xs_state.watch_mutex);
+}
+
+void xs_suspend_cancel(void)
+{
+	mutex_unlock(&xs_state.response_mutex);
+	mutex_unlock(&xs_state.request_mutex);
+	up_write(&xs_state.watch_mutex);
+	up_write(&xs_state.transaction_mutex);
+}
+
+static int xenwatch_thread(void *unused)
+{
+	struct list_head *ent;
+	struct xs_stored_msg *msg;
+
+	for (;;) {
+		wait_event_interruptible(watch_events_waitq,
+					 !list_empty(&watch_events));
+
+		if (kthread_should_stop())
+			break;
+
+		mutex_lock(&xenwatch_mutex);
+
+		spin_lock(&watch_events_lock);
+		ent = watch_events.next;
+		if (ent != &watch_events)
+			list_del(ent);
+		spin_unlock(&watch_events_lock);
+
+		if (ent != &watch_events) {
+			msg = list_entry(ent, struct xs_stored_msg, list);
+			msg->u.watch.handle->callback(
+				msg->u.watch.handle,
+				(const char **)msg->u.watch.vec,
+				msg->u.watch.vec_size);
+			kfree(msg->u.watch.vec);
+			kfree(msg);
+		}
+
+		mutex_unlock(&xenwatch_mutex);
+	}
+
+	return 0;
+}
+
+static int process_msg(void)
+{
+	struct xs_stored_msg *msg;
+	char *body;
+	int err;
+
+	/*
+	 * We must disallow save/restore while reading a xenstore message.
+	 * A partial read across s/r leaves us out of sync with xenstored.
+	 */
+	for (;;) {
+		err = xb_wait_for_data_to_read();
+		if (err)
+			return err;
+		mutex_lock(&xs_state.response_mutex);
+		if (xb_data_to_read())
+			break;
+		/* We raced with save/restore: pending data 'disappeared'. */
+		mutex_unlock(&xs_state.response_mutex);
+	}
+
+
+	msg = kmalloc(sizeof(*msg), GFP_KERNEL);
+	if (msg == NULL) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = xb_read(&msg->hdr, sizeof(msg->hdr));
+	if (err) {
+		kfree(msg);
+		goto out;
+	}
+
+	body = kmalloc(msg->hdr.len + 1, GFP_KERNEL);
+	if (body == NULL) {
+		kfree(msg);
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = xb_read(body, msg->hdr.len);
+	if (err) {
+		kfree(body);
+		kfree(msg);
+		goto out;
+	}
+	body[msg->hdr.len] = '\0';
+
+	if (msg->hdr.type == XS_WATCH_EVENT) {
+		msg->u.watch.vec = split(body, msg->hdr.len,
+					 &msg->u.watch.vec_size);
+		if (IS_ERR(msg->u.watch.vec)) {
+			kfree(msg);
+			err = PTR_ERR(msg->u.watch.vec);
+			goto out;
+		}
+
+		spin_lock(&watches_lock);
+		msg->u.watch.handle = find_watch(
+			msg->u.watch.vec[XS_WATCH_TOKEN]);
+		if (msg->u.watch.handle != NULL) {
+			spin_lock(&watch_events_lock);
+			list_add_tail(&msg->list, &watch_events);
+			wake_up(&watch_events_waitq);
+			spin_unlock(&watch_events_lock);
+		} else {
+			kfree(msg->u.watch.vec);
+			kfree(msg);
+		}
+		spin_unlock(&watches_lock);
+	} else {
+		msg->u.reply.body = body;
+		spin_lock(&xs_state.reply_lock);
+		list_add_tail(&msg->list, &xs_state.reply_list);
+		spin_unlock(&xs_state.reply_lock);
+		wake_up(&xs_state.reply_waitq);
+	}
+
+ out:
+	mutex_unlock(&xs_state.response_mutex);
+	return err;
+}
+
+static int xenbus_thread(void *unused)
+{
+	int err;
+
+	for (;;) {
+		err = process_msg();
+		if (err)
+			printk(KERN_WARNING "XENBUS error %d while reading "
+			       "message\n", err);
+		if (kthread_should_stop())
+			break;
+	}
+
+	return 0;
+}
+
+int xs_init(void)
+{
+	int err;
+	struct task_struct *task;
+
+	INIT_LIST_HEAD(&xs_state.reply_list);
+	spin_lock_init(&xs_state.reply_lock);
+	init_waitqueue_head(&xs_state.reply_waitq);
+
+	mutex_init(&xs_state.request_mutex);
+	mutex_init(&xs_state.response_mutex);
+	init_rwsem(&xs_state.transaction_mutex);
+	init_rwsem(&xs_state.watch_mutex);
+
+	/* Initialize the shared memory rings to talk to xenstored */
+	err = xb_init_comms();
+	if (err)
+		return err;
+
+	task = kthread_run(xenwatch_thread, NULL, "xenwatch");
+	if (IS_ERR(task))
+		return PTR_ERR(task);
+	xenwatch_pid = task->pid;
+
+	task = kthread_run(xenbus_thread, NULL, "xenbus");
+	if (IS_ERR(task))
+		return PTR_ERR(task);
+
+	return 0;
+}
diff --git a/fs/ocfs2/heartbeat.c b/fs/ocfs2/heartbeat.c
index 352eb4a..c4c3617 100644
--- a/fs/ocfs2/heartbeat.c
+++ b/fs/ocfs2/heartbeat.c
@@ -209,7 +209,7 @@
 	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
 	envp[2] = NULL;
 
-	ret = call_usermodehelper(argv[0], argv, envp, 1);
+	ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
 	if (ret < 0)
 		mlog_errno(ret);
 }
diff --git a/include/asm-i386/irq.h b/include/asm-i386/irq.h
index 9e15ce0..36f3106 100644
--- a/include/asm-i386/irq.h
+++ b/include/asm-i386/irq.h
@@ -41,6 +41,7 @@
 extern void fixup_irqs(cpumask_t map);
 #endif
 
+unsigned int do_IRQ(struct pt_regs *regs);
 void init_IRQ(void);
 void __init native_init_IRQ(void);
 
diff --git a/include/asm-i386/mach-default/irq_vectors_limits.h b/include/asm-i386/mach-default/irq_vectors_limits.h
index 7f161e7..a90c7a6 100644
--- a/include/asm-i386/mach-default/irq_vectors_limits.h
+++ b/include/asm-i386/mach-default/irq_vectors_limits.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_IRQ_VECTORS_LIMITS_H
 #define _ASM_IRQ_VECTORS_LIMITS_H
 
-#ifdef CONFIG_X86_IO_APIC
+#if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT)
 #define NR_IRQS 224
 # if (224 >= 32 * NR_CPUS)
 # define NR_IRQ_VECTORS NR_IRQS
diff --git a/include/asm-i386/mmu_context.h b/include/asm-i386/mmu_context.h
index 8198d1c..7eb0b0b 100644
--- a/include/asm-i386/mmu_context.h
+++ b/include/asm-i386/mmu_context.h
@@ -32,6 +32,8 @@
 #endif
 }
 
+void leave_mm(unsigned long cpu);
+
 static inline void switch_mm(struct mm_struct *prev,
 			     struct mm_struct *next,
 			     struct task_struct *tsk)
diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h
index 7f846a7..7df88be 100644
--- a/include/asm-i386/paravirt.h
+++ b/include/asm-i386/paravirt.h
@@ -52,6 +52,8 @@
 	/* Basic arch-specific setup */
 	void (*arch_setup)(void);
 	char *(*memory_setup)(void);
+	void (*post_allocator_init)(void);
+
 	void (*init_IRQ)(void);
 	void (*time_init)(void);
 
@@ -116,7 +118,7 @@
 
 	u64 (*read_tsc)(void);
 	u64 (*read_pmc)(void);
- 	u64 (*get_scheduled_cycles)(void);
+	unsigned long long (*sched_clock)(void);
 	unsigned long (*get_cpu_khz)(void);
 
 	/* Segment descriptor handling */
@@ -173,7 +175,7 @@
 				 unsigned long va);
 
 	/* Hooks for allocating/releasing pagetable pages */
-	void (*alloc_pt)(u32 pfn);
+	void (*alloc_pt)(struct mm_struct *mm, u32 pfn);
 	void (*alloc_pd)(u32 pfn);
 	void (*alloc_pd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count);
 	void (*release_pt)(u32 pfn);
@@ -260,6 +262,7 @@
 unsigned paravirt_patch_insns(void *site, unsigned len,
 			      const char *start, const char *end);
 
+int paravirt_disable_iospace(void);
 
 /*
  * This generates an indirect call based on the operation type number.
@@ -563,7 +566,10 @@
 
 #define rdtscll(val) (val = paravirt_read_tsc())
 
-#define get_scheduled_cycles(val) (val = paravirt_ops.get_scheduled_cycles())
+static inline unsigned long long paravirt_sched_clock(void)
+{
+	return PVOP_CALL0(unsigned long long, sched_clock);
+}
 #define calculate_cpu_khz() (paravirt_ops.get_cpu_khz())
 
 #define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
@@ -669,6 +675,12 @@
 }
 #endif
 
+static inline void paravirt_post_allocator_init(void)
+{
+	if (paravirt_ops.post_allocator_init)
+		(*paravirt_ops.post_allocator_init)();
+}
+
 static inline void paravirt_pagetable_setup_start(pgd_t *base)
 {
 	if (paravirt_ops.pagetable_setup_start)
@@ -725,9 +737,9 @@
 	PVOP_VCALL3(flush_tlb_others, &cpumask, mm, va);
 }
 
-static inline void paravirt_alloc_pt(unsigned pfn)
+static inline void paravirt_alloc_pt(struct mm_struct *mm, unsigned pfn)
 {
-	PVOP_VCALL1(alloc_pt, pfn);
+	PVOP_VCALL2(alloc_pt, mm, pfn);
 }
 static inline void paravirt_release_pt(unsigned pfn)
 {
diff --git a/include/asm-i386/pgalloc.h b/include/asm-i386/pgalloc.h
index d07b7af..f2fc33c 100644
--- a/include/asm-i386/pgalloc.h
+++ b/include/asm-i386/pgalloc.h
@@ -7,7 +7,7 @@
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
-#define paravirt_alloc_pt(pfn) do { } while (0)
+#define paravirt_alloc_pt(mm, pfn) do { } while (0)
 #define paravirt_alloc_pd(pfn) do { } while (0)
 #define paravirt_alloc_pd(pfn) do { } while (0)
 #define paravirt_alloc_pd_clone(pfn, clonepfn, start, count) do { } while (0)
@@ -17,13 +17,13 @@
 
 #define pmd_populate_kernel(mm, pmd, pte)			\
 do {								\
-	paravirt_alloc_pt(__pa(pte) >> PAGE_SHIFT);		\
+	paravirt_alloc_pt(mm, __pa(pte) >> PAGE_SHIFT);		\
 	set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)));		\
 } while (0)
 
 #define pmd_populate(mm, pmd, pte) 				\
 do {								\
-	paravirt_alloc_pt(page_to_pfn(pte));			\
+	paravirt_alloc_pt(mm, page_to_pfn(pte));		\
 	set_pmd(pmd, __pmd(_PAGE_TABLE +			\
 		((unsigned long long)page_to_pfn(pte) <<	\
 			(unsigned long long) PAGE_SHIFT)));	\
diff --git a/include/asm-i386/setup.h b/include/asm-i386/setup.h
index 0d5bff9..7862fe8 100644
--- a/include/asm-i386/setup.h
+++ b/include/asm-i386/setup.h
@@ -81,6 +81,10 @@
 
 extern unsigned long init_pg_tables_end;
 
+#ifndef CONFIG_PARAVIRT
+#define paravirt_post_allocator_init()	do {} while (0)
+#endif
+
 #endif /* __ASSEMBLY__ */
 
 #endif  /*  __KERNEL__  */
diff --git a/include/asm-i386/smp.h b/include/asm-i386/smp.h
index 0c71327..1f73bde 100644
--- a/include/asm-i386/smp.h
+++ b/include/asm-i386/smp.h
@@ -43,9 +43,12 @@
 
 #define cpu_physical_id(cpu)	x86_cpu_to_apicid[cpu]
 
+extern void set_cpu_sibling_map(int cpu);
+
 #ifdef CONFIG_HOTPLUG_CPU
 extern void cpu_exit_clear(void);
 extern void cpu_uninit(void);
+extern void remove_siblinginfo(int cpu);
 #endif
 
 struct smp_ops
@@ -129,6 +132,8 @@
 extern void __cpu_die(unsigned int cpu);
 extern unsigned int num_processors;
 
+void __cpuinit smp_store_cpu_info(int id);
+
 #endif /* !__ASSEMBLY__ */
 
 #else /* CONFIG_SMP */
diff --git a/include/asm-i386/timer.h b/include/asm-i386/timer.h
index 153770e..51a713e 100644
--- a/include/asm-i386/timer.h
+++ b/include/asm-i386/timer.h
@@ -15,8 +15,38 @@
 extern int recalibrate_cpu_khz(void);
 
 #ifndef CONFIG_PARAVIRT
-#define get_scheduled_cycles(val) rdtscll(val)
 #define calculate_cpu_khz() native_calculate_cpu_khz()
 #endif
 
+/* Accellerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *		ns = cycles / (freq / ns_per_sec)
+ *		ns = cycles * (ns_per_sec / freq)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
+ *
+ *	Then we use scaling math (suggested by george@mvista.com) to get:
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *		ns = cycles * cyc2ns_scale / SC
+ *
+ *	And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better percision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+extern unsigned long cyc2ns_scale __read_mostly;
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+
 #endif
diff --git a/include/asm-i386/vmi_time.h b/include/asm-i386/vmi_time.h
index 213930b..4781881 100644
--- a/include/asm-i386/vmi_time.h
+++ b/include/asm-i386/vmi_time.h
@@ -49,7 +49,7 @@
 extern void __init vmi_time_init(void);
 extern unsigned long vmi_get_wallclock(void);
 extern int vmi_set_wallclock(unsigned long now);
-extern unsigned long long vmi_get_sched_cycles(void);
+extern unsigned long long vmi_sched_clock(void);
 extern unsigned long vmi_cpu_khz(void);
 
 #ifdef CONFIG_X86_LOCAL_APIC
diff --git a/include/asm-i386/xen/hypercall.h b/include/asm-i386/xen/hypercall.h
new file mode 100644
index 0000000..bc0ee7d
--- /dev/null
+++ b/include/asm-i386/xen/hypercall.h
@@ -0,0 +1,413 @@
+/******************************************************************************
+ * hypercall.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __HYPERCALL_H__
+#define __HYPERCALL_H__
+
+#include <linux/errno.h>
+#include <linux/string.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
+#include <xen/interface/physdev.h>
+
+extern struct { char _entry[32]; } hypercall_page[];
+
+#define _hypercall0(type, name)						\
+({									\
+	long __res;							\
+	asm volatile (							\
+		"call %[call]"						\
+		: "=a" (__res)						\
+		: [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
+		: "memory" );						\
+	(type)__res;							\
+})
+
+#define _hypercall1(type, name, a1)					\
+({									\
+	long __res, __ign1;						\
+	asm volatile (							\
+		"call %[call]"						\
+		: "=a" (__res), "=b" (__ign1)				\
+		: "1" ((long)(a1)),					\
+		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
+		: "memory" );						\
+	(type)__res;							\
+})
+
+#define _hypercall2(type, name, a1, a2)					\
+({									\
+	long __res, __ign1, __ign2;					\
+	asm volatile (							\
+		"call %[call]"						\
+		: "=a" (__res), "=b" (__ign1), "=c" (__ign2)		\
+		: "1" ((long)(a1)), "2" ((long)(a2)),			\
+		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
+		: "memory" );						\
+	(type)__res;							\
+})
+
+#define _hypercall3(type, name, a1, a2, a3)				\
+({									\
+	long __res, __ign1, __ign2, __ign3;				\
+	asm volatile (							\
+		"call %[call]"						\
+		: "=a" (__res), "=b" (__ign1), "=c" (__ign2),		\
+		"=d" (__ign3)						\
+		: "1" ((long)(a1)), "2" ((long)(a2)),			\
+		  "3" ((long)(a3)),					\
+		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
+		: "memory" );						\
+	(type)__res;							\
+})
+
+#define _hypercall4(type, name, a1, a2, a3, a4)				\
+({									\
+	long __res, __ign1, __ign2, __ign3, __ign4;			\
+	asm volatile (							\
+		"call %[call]"						\
+		: "=a" (__res), "=b" (__ign1), "=c" (__ign2),		\
+		"=d" (__ign3), "=S" (__ign4)				\
+		: "1" ((long)(a1)), "2" ((long)(a2)),			\
+		  "3" ((long)(a3)), "4" ((long)(a4)),			\
+		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
+		: "memory" );						\
+	(type)__res;							\
+})
+
+#define _hypercall5(type, name, a1, a2, a3, a4, a5)			\
+({									\
+	long __res, __ign1, __ign2, __ign3, __ign4, __ign5;		\
+	asm volatile (							\
+		"call %[call]"						\
+		: "=a" (__res), "=b" (__ign1), "=c" (__ign2),		\
+		"=d" (__ign3), "=S" (__ign4), "=D" (__ign5)		\
+		: "1" ((long)(a1)), "2" ((long)(a2)),			\
+		  "3" ((long)(a3)), "4" ((long)(a4)),			\
+		  "5" ((long)(a5)),					\
+		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
+		: "memory" );						\
+	(type)__res;							\
+})
+
+static inline int
+HYPERVISOR_set_trap_table(struct trap_info *table)
+{
+	return _hypercall1(int, set_trap_table, table);
+}
+
+static inline int
+HYPERVISOR_mmu_update(struct mmu_update *req, int count,
+		      int *success_count, domid_t domid)
+{
+	return _hypercall4(int, mmu_update, req, count, success_count, domid);
+}
+
+static inline int
+HYPERVISOR_mmuext_op(struct mmuext_op *op, int count,
+		     int *success_count, domid_t domid)
+{
+	return _hypercall4(int, mmuext_op, op, count, success_count, domid);
+}
+
+static inline int
+HYPERVISOR_set_gdt(unsigned long *frame_list, int entries)
+{
+	return _hypercall2(int, set_gdt, frame_list, entries);
+}
+
+static inline int
+HYPERVISOR_stack_switch(unsigned long ss, unsigned long esp)
+{
+	return _hypercall2(int, stack_switch, ss, esp);
+}
+
+static inline int
+HYPERVISOR_set_callbacks(unsigned long event_selector,
+			 unsigned long event_address,
+			 unsigned long failsafe_selector,
+			 unsigned long failsafe_address)
+{
+	return _hypercall4(int, set_callbacks,
+			   event_selector, event_address,
+			   failsafe_selector, failsafe_address);
+}
+
+static inline int
+HYPERVISOR_fpu_taskswitch(int set)
+{
+	return _hypercall1(int, fpu_taskswitch, set);
+}
+
+static inline int
+HYPERVISOR_sched_op(int cmd, unsigned long arg)
+{
+	return _hypercall2(int, sched_op, cmd, arg);
+}
+
+static inline long
+HYPERVISOR_set_timer_op(u64 timeout)
+{
+	unsigned long timeout_hi = (unsigned long)(timeout>>32);
+	unsigned long timeout_lo = (unsigned long)timeout;
+	return _hypercall2(long, set_timer_op, timeout_lo, timeout_hi);
+}
+
+static inline int
+HYPERVISOR_set_debugreg(int reg, unsigned long value)
+{
+	return _hypercall2(int, set_debugreg, reg, value);
+}
+
+static inline unsigned long
+HYPERVISOR_get_debugreg(int reg)
+{
+	return _hypercall1(unsigned long, get_debugreg, reg);
+}
+
+static inline int
+HYPERVISOR_update_descriptor(u64 ma, u64 desc)
+{
+	return _hypercall4(int, update_descriptor, ma, ma>>32, desc, desc>>32);
+}
+
+static inline int
+HYPERVISOR_memory_op(unsigned int cmd, void *arg)
+{
+	return _hypercall2(int, memory_op, cmd, arg);
+}
+
+static inline int
+HYPERVISOR_multicall(void *call_list, int nr_calls)
+{
+	return _hypercall2(int, multicall, call_list, nr_calls);
+}
+
+static inline int
+HYPERVISOR_update_va_mapping(unsigned long va, pte_t new_val,
+			     unsigned long flags)
+{
+	unsigned long pte_hi = 0;
+#ifdef CONFIG_X86_PAE
+	pte_hi = new_val.pte_high;
+#endif
+	return _hypercall4(int, update_va_mapping, va,
+			   new_val.pte_low, pte_hi, flags);
+}
+
+static inline int
+HYPERVISOR_event_channel_op(int cmd, void *arg)
+{
+	int rc = _hypercall2(int, event_channel_op, cmd, arg);
+	if (unlikely(rc == -ENOSYS)) {
+		struct evtchn_op op;
+		op.cmd = cmd;
+		memcpy(&op.u, arg, sizeof(op.u));
+		rc = _hypercall1(int, event_channel_op_compat, &op);
+		memcpy(arg, &op.u, sizeof(op.u));
+	}
+	return rc;
+}
+
+static inline int
+HYPERVISOR_xen_version(int cmd, void *arg)
+{
+	return _hypercall2(int, xen_version, cmd, arg);
+}
+
+static inline int
+HYPERVISOR_console_io(int cmd, int count, char *str)
+{
+	return _hypercall3(int, console_io, cmd, count, str);
+}
+
+static inline int
+HYPERVISOR_physdev_op(int cmd, void *arg)
+{
+	int rc = _hypercall2(int, physdev_op, cmd, arg);
+	if (unlikely(rc == -ENOSYS)) {
+		struct physdev_op op;
+		op.cmd = cmd;
+		memcpy(&op.u, arg, sizeof(op.u));
+		rc = _hypercall1(int, physdev_op_compat, &op);
+		memcpy(arg, &op.u, sizeof(op.u));
+	}
+	return rc;
+}
+
+static inline int
+HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count)
+{
+	return _hypercall3(int, grant_table_op, cmd, uop, count);
+}
+
+static inline int
+HYPERVISOR_update_va_mapping_otherdomain(unsigned long va, pte_t new_val,
+					 unsigned long flags, domid_t domid)
+{
+	unsigned long pte_hi = 0;
+#ifdef CONFIG_X86_PAE
+	pte_hi = new_val.pte_high;
+#endif
+	return _hypercall5(int, update_va_mapping_otherdomain, va,
+			   new_val.pte_low, pte_hi, flags, domid);
+}
+
+static inline int
+HYPERVISOR_vm_assist(unsigned int cmd, unsigned int type)
+{
+	return _hypercall2(int, vm_assist, cmd, type);
+}
+
+static inline int
+HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args)
+{
+	return _hypercall3(int, vcpu_op, cmd, vcpuid, extra_args);
+}
+
+static inline int
+HYPERVISOR_suspend(unsigned long srec)
+{
+	return _hypercall3(int, sched_op, SCHEDOP_shutdown,
+			   SHUTDOWN_suspend, srec);
+}
+
+static inline int
+HYPERVISOR_nmi_op(unsigned long op, unsigned long arg)
+{
+	return _hypercall2(int, nmi_op, op, arg);
+}
+
+static inline void
+MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
+			pte_t new_val, unsigned long flags)
+{
+	mcl->op = __HYPERVISOR_update_va_mapping;
+	mcl->args[0] = va;
+#ifdef CONFIG_X86_PAE
+	mcl->args[1] = new_val.pte_low;
+	mcl->args[2] = new_val.pte_high;
+#else
+	mcl->args[1] = new_val.pte_low;
+	mcl->args[2] = 0;
+#endif
+	mcl->args[3] = flags;
+}
+
+static inline void
+MULTI_grant_table_op(struct multicall_entry *mcl, unsigned int cmd,
+		     void *uop, unsigned int count)
+{
+	mcl->op = __HYPERVISOR_grant_table_op;
+	mcl->args[0] = cmd;
+	mcl->args[1] = (unsigned long)uop;
+	mcl->args[2] = count;
+}
+
+static inline void
+MULTI_update_va_mapping_otherdomain(struct multicall_entry *mcl, unsigned long va,
+				    pte_t new_val, unsigned long flags,
+				    domid_t domid)
+{
+	mcl->op = __HYPERVISOR_update_va_mapping_otherdomain;
+	mcl->args[0] = va;
+#ifdef CONFIG_X86_PAE
+	mcl->args[1] = new_val.pte_low;
+	mcl->args[2] = new_val.pte_high;
+#else
+	mcl->args[1] = new_val.pte_low;
+	mcl->args[2] = 0;
+#endif
+	mcl->args[3] = flags;
+	mcl->args[4] = domid;
+}
+
+static inline void
+MULTI_update_descriptor(struct multicall_entry *mcl, u64 maddr,
+			struct desc_struct desc)
+{
+	mcl->op = __HYPERVISOR_update_descriptor;
+	mcl->args[0] = maddr;
+	mcl->args[1] = maddr >> 32;
+	mcl->args[2] = desc.a;
+	mcl->args[3] = desc.b;
+}
+
+static inline void
+MULTI_memory_op(struct multicall_entry *mcl, unsigned int cmd, void *arg)
+{
+	mcl->op = __HYPERVISOR_memory_op;
+	mcl->args[0] = cmd;
+	mcl->args[1] = (unsigned long)arg;
+}
+
+static inline void
+MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
+		 int count, int *success_count, domid_t domid)
+{
+	mcl->op = __HYPERVISOR_mmu_update;
+	mcl->args[0] = (unsigned long)req;
+	mcl->args[1] = count;
+	mcl->args[2] = (unsigned long)success_count;
+	mcl->args[3] = domid;
+}
+
+static inline void
+MULTI_mmuext_op(struct multicall_entry *mcl, struct mmuext_op *op, int count,
+		int *success_count, domid_t domid)
+{
+	mcl->op = __HYPERVISOR_mmuext_op;
+	mcl->args[0] = (unsigned long)op;
+	mcl->args[1] = count;
+	mcl->args[2] = (unsigned long)success_count;
+	mcl->args[3] = domid;
+}
+
+static inline void
+MULTI_set_gdt(struct multicall_entry *mcl, unsigned long *frames, int entries)
+{
+	mcl->op = __HYPERVISOR_set_gdt;
+	mcl->args[0] = (unsigned long)frames;
+	mcl->args[1] = entries;
+}
+
+static inline void
+MULTI_stack_switch(struct multicall_entry *mcl,
+		   unsigned long ss, unsigned long esp)
+{
+	mcl->op = __HYPERVISOR_stack_switch;
+	mcl->args[0] = ss;
+	mcl->args[1] = esp;
+}
+
+#endif /* __HYPERCALL_H__ */
diff --git a/include/asm-i386/xen/hypervisor.h b/include/asm-i386/xen/hypervisor.h
new file mode 100644
index 0000000..8e15dd2
--- /dev/null
+++ b/include/asm-i386/xen/hypervisor.h
@@ -0,0 +1,73 @@
+/******************************************************************************
+ * hypervisor.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __HYPERVISOR_H__
+#define __HYPERVISOR_H__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/version.h>
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/desc.h>
+#if defined(__i386__)
+#  ifdef CONFIG_X86_PAE
+#   include <asm-generic/pgtable-nopud.h>
+#  else
+#   include <asm-generic/pgtable-nopmd.h>
+#  endif
+#endif
+#include <asm/xen/hypercall.h>
+
+/* arch/i386/kernel/setup.c */
+extern struct shared_info *HYPERVISOR_shared_info;
+extern struct start_info *xen_start_info;
+#define is_initial_xendomain() (xen_start_info->flags & SIF_INITDOMAIN)
+
+/* arch/i386/mach-xen/evtchn.c */
+/* Force a proper event-channel callback from Xen. */
+extern void force_evtchn_callback(void);
+
+/* Turn jiffies into Xen system time. */
+u64 jiffies_to_st(unsigned long jiffies);
+
+
+#define MULTI_UVMFLAGS_INDEX 3
+#define MULTI_UVMDOMID_INDEX 4
+
+#define is_running_on_xen()	(xen_start_info ? 1 : 0)
+
+#endif /* __HYPERVISOR_H__ */
diff --git a/include/asm-i386/xen/interface.h b/include/asm-i386/xen/interface.h
new file mode 100644
index 0000000..165c396
--- /dev/null
+++ b/include/asm-i386/xen/interface.h
@@ -0,0 +1,188 @@
+/******************************************************************************
+ * arch-x86_32.h
+ *
+ * Guest OS interface to x86 32-bit Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __XEN_PUBLIC_ARCH_X86_32_H__
+#define __XEN_PUBLIC_ARCH_X86_32_H__
+
+#ifdef __XEN__
+#define __DEFINE_GUEST_HANDLE(name, type) \
+    typedef struct { type *p; } __guest_handle_ ## name
+#else
+#define __DEFINE_GUEST_HANDLE(name, type) \
+    typedef type * __guest_handle_ ## name
+#endif
+
+#define DEFINE_GUEST_HANDLE_STRUCT(name) \
+	__DEFINE_GUEST_HANDLE(name, struct name)
+#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name)
+#define GUEST_HANDLE(name)        __guest_handle_ ## name
+
+#ifndef __ASSEMBLY__
+/* Guest handles for primitive C types. */
+__DEFINE_GUEST_HANDLE(uchar, unsigned char);
+__DEFINE_GUEST_HANDLE(uint,  unsigned int);
+__DEFINE_GUEST_HANDLE(ulong, unsigned long);
+DEFINE_GUEST_HANDLE(char);
+DEFINE_GUEST_HANDLE(int);
+DEFINE_GUEST_HANDLE(long);
+DEFINE_GUEST_HANDLE(void);
+#endif
+
+/*
+ * SEGMENT DESCRIPTOR TABLES
+ */
+/*
+ * A number of GDT entries are reserved by Xen. These are not situated at the
+ * start of the GDT because some stupid OSes export hard-coded selector values
+ * in their ABI. These hard-coded values are always near the start of the GDT,
+ * so Xen places itself out of the way, at the far end of the GDT.
+ */
+#define FIRST_RESERVED_GDT_PAGE  14
+#define FIRST_RESERVED_GDT_BYTE  (FIRST_RESERVED_GDT_PAGE * 4096)
+#define FIRST_RESERVED_GDT_ENTRY (FIRST_RESERVED_GDT_BYTE / 8)
+
+/*
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+#define FLAT_RING1_CS 0xe019    /* GDT index 259 */
+#define FLAT_RING1_DS 0xe021    /* GDT index 260 */
+#define FLAT_RING1_SS 0xe021    /* GDT index 260 */
+#define FLAT_RING3_CS 0xe02b    /* GDT index 261 */
+#define FLAT_RING3_DS 0xe033    /* GDT index 262 */
+#define FLAT_RING3_SS 0xe033    /* GDT index 262 */
+
+#define FLAT_KERNEL_CS FLAT_RING1_CS
+#define FLAT_KERNEL_DS FLAT_RING1_DS
+#define FLAT_KERNEL_SS FLAT_RING1_SS
+#define FLAT_USER_CS    FLAT_RING3_CS
+#define FLAT_USER_DS    FLAT_RING3_DS
+#define FLAT_USER_SS    FLAT_RING3_SS
+
+/* And the trap vector is... */
+#define TRAP_INSTR "int $0x82"
+
+/*
+ * Virtual addresses beyond this are not modifiable by guest OSes. The
+ * machine->physical mapping table starts at this address, read-only.
+ */
+#ifdef CONFIG_X86_PAE
+#define __HYPERVISOR_VIRT_START 0xF5800000
+#else
+#define __HYPERVISOR_VIRT_START 0xFC000000
+#endif
+
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#endif
+
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+#define MAX_VIRT_CPUS 32
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Send an array of these to HYPERVISOR_set_trap_table()
+ */
+#define TI_GET_DPL(_ti)		((_ti)->flags & 3)
+#define TI_GET_IF(_ti)		((_ti)->flags & 4)
+#define TI_SET_DPL(_ti, _dpl)	((_ti)->flags |= (_dpl))
+#define TI_SET_IF(_ti, _if)	((_ti)->flags |= ((!!(_if))<<2))
+
+struct trap_info {
+    uint8_t       vector;  /* exception vector                              */
+    uint8_t       flags;   /* 0-3: privilege level; 4: clear event enable?  */
+    uint16_t      cs;      /* code selector                                 */
+    unsigned long address; /* code offset                                   */
+};
+DEFINE_GUEST_HANDLE_STRUCT(trap_info);
+
+struct cpu_user_regs {
+    uint32_t ebx;
+    uint32_t ecx;
+    uint32_t edx;
+    uint32_t esi;
+    uint32_t edi;
+    uint32_t ebp;
+    uint32_t eax;
+    uint16_t error_code;    /* private */
+    uint16_t entry_vector;  /* private */
+    uint32_t eip;
+    uint16_t cs;
+    uint8_t  saved_upcall_mask;
+    uint8_t  _pad0;
+    uint32_t eflags;        /* eflags.IF == !saved_upcall_mask */
+    uint32_t esp;
+    uint16_t ss, _pad1;
+    uint16_t es, _pad2;
+    uint16_t ds, _pad3;
+    uint16_t fs, _pad4;
+    uint16_t gs, _pad5;
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+
+/*
+ * The following is all CPU context. Note that the fpu_ctxt block is filled
+ * in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
+ */
+struct vcpu_guest_context {
+    /* FPU registers come first so they can be aligned for FXSAVE/FXRSTOR. */
+    struct { char x[512]; } fpu_ctxt;       /* User-level FPU registers     */
+#define VGCF_I387_VALID (1<<0)
+#define VGCF_HVM_GUEST  (1<<1)
+#define VGCF_IN_KERNEL  (1<<2)
+    unsigned long flags;                    /* VGCF_* flags                 */
+    struct cpu_user_regs user_regs;         /* User-level CPU registers     */
+    struct trap_info trap_ctxt[256];        /* Virtual IDT                  */
+    unsigned long ldt_base, ldt_ents;       /* LDT (linear address, # ents) */
+    unsigned long gdt_frames[16], gdt_ents; /* GDT (machine frames, # ents) */
+    unsigned long kernel_ss, kernel_sp;     /* Virtual TSS (only SS1/SP1)   */
+    unsigned long ctrlreg[8];               /* CR0-CR7 (control registers)  */
+    unsigned long debugreg[8];              /* DB0-DB7 (debug registers)    */
+    unsigned long event_callback_cs;        /* CS:EIP of event callback     */
+    unsigned long event_callback_eip;
+    unsigned long failsafe_callback_cs;     /* CS:EIP of failsafe callback  */
+    unsigned long failsafe_callback_eip;
+    unsigned long vm_assist;                /* VMASST_TYPE_* bitmap */
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_guest_context);
+
+struct arch_shared_info {
+    unsigned long max_pfn;                  /* max pfn that appears in table */
+    /* Frame containing list of mfns containing list of mfns containing p2m. */
+    unsigned long pfn_to_mfn_frame_list_list;
+    unsigned long nmi_reason;
+};
+
+struct arch_vcpu_info {
+    unsigned long cr2;
+    unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Prefix forces emulation of some non-trapping instructions.
+ * Currently only CPUID.
+ */
+#ifdef __ASSEMBLY__
+#define XEN_EMULATE_PREFIX .byte 0x0f,0x0b,0x78,0x65,0x6e ;
+#define XEN_CPUID          XEN_EMULATE_PREFIX cpuid
+#else
+#define XEN_EMULATE_PREFIX ".byte 0x0f,0x0b,0x78,0x65,0x6e ; "
+#define XEN_CPUID          XEN_EMULATE_PREFIX "cpuid"
+#endif
+
+#endif
diff --git a/include/asm-mips/dec/serial.h b/include/asm-mips/dec/serial.h
deleted file mode 100644
index acad758..0000000
--- a/include/asm-mips/dec/serial.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *	include/asm-mips/dec/serial.h
- *
- *	Definitions common to all DECstation serial devices.
- *
- *	Copyright (C) 2004  Maciej W. Rozycki
- *
- *	Based on bits extracted from drivers/tc/zs.h for which
- *	the following copyrights apply:
- *
- *	Copyright (C) 1995  David S. Miller (davem@caip.rutgers.edu)
- *	Copyright (C) 1996  Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
- *	Copyright (C)       Harald Koerfgen
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_MIPS_DEC_SERIAL_H
-#define __ASM_MIPS_DEC_SERIAL_H
-
-struct dec_serial_hook {
-	int (*init_channel)(void *handle);
-	void (*init_info)(void *handle);
-	void (*rx_char)(unsigned char ch, unsigned char fl);
-	int (*poll_rx_char)(void *handle);
-	int (*poll_tx_char)(void *handle, unsigned char ch);
-	unsigned int cflags;
-};
-
-extern int register_dec_serial_hook(unsigned int channel,
-				    struct dec_serial_hook *hook);
-extern int unregister_dec_serial_hook(unsigned int channel);
-
-#endif /* __ASM_MIPS_DEC_SERIAL_H */
diff --git a/include/linux/elfnote.h b/include/linux/elfnote.h
index 9a1e067..e831759 100644
--- a/include/linux/elfnote.h
+++ b/include/linux/elfnote.h
@@ -38,17 +38,25 @@
  * e.g. ELFNOTE(XYZCo, 42, .asciz, "forty-two")
  *      ELFNOTE(XYZCo, 12, .long, 0xdeadbeef)
  */
-#define ELFNOTE(name, type, desctype, descdata)	\
-.pushsection .note.name, "",@note	;	\
-  .align 4				;	\
+#define ELFNOTE_START(name, type, flags)	\
+.pushsection .note.name, flags,@note	;	\
+  .balign 4				;	\
   .long 2f - 1f		/* namesz */	;	\
-  .long 4f - 3f		/* descsz */	;	\
+  .long 4484f - 3f	/* descsz */	;	\
   .long type				;	\
 1:.asciz #name				;	\
-2:.align 4				;	\
-3:desctype descdata			;	\
-4:.align 4				;	\
+2:.balign 4				;	\
+3:
+
+#define ELFNOTE_END				\
+4484:.balign 4				;	\
 .popsection				;
+
+#define ELFNOTE(name, type, desc)		\
+	ELFNOTE_START(name, type, "")		\
+		desc			;	\
+	ELFNOTE_END
+
 #else	/* !__ASSEMBLER__ */
 #include <linux/elf.h>
 /*
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 10f505c..5dc1384 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -36,13 +36,57 @@
 #define try_then_request_module(x, mod...) ((x) ?: (request_module(mod), (x)))
 
 struct key;
-extern int call_usermodehelper_keys(char *path, char *argv[], char *envp[],
-				    struct key *session_keyring, int wait);
+struct file;
+struct subprocess_info;
+
+/* Allocate a subprocess_info structure */
+struct subprocess_info *call_usermodehelper_setup(char *path,
+						  char **argv, char **envp);
+
+/* Set various pieces of state into the subprocess_info structure */
+void call_usermodehelper_setkeys(struct subprocess_info *info,
+				 struct key *session_keyring);
+int call_usermodehelper_stdinpipe(struct subprocess_info *sub_info,
+				  struct file **filp);
+void call_usermodehelper_setcleanup(struct subprocess_info *info,
+				    void (*cleanup)(char **argv, char **envp));
+
+enum umh_wait {
+	UMH_NO_WAIT = -1,	/* don't wait at all */
+	UMH_WAIT_EXEC = 0,	/* wait for the exec, but not the process */
+	UMH_WAIT_PROC = 1,	/* wait for the process to complete */
+};
+
+/* Actually execute the sub-process */
+int call_usermodehelper_exec(struct subprocess_info *info, enum umh_wait wait);
+
+/* Free the subprocess_info. This is only needed if you're not going
+   to call call_usermodehelper_exec */
+void call_usermodehelper_freeinfo(struct subprocess_info *info);
 
 static inline int
-call_usermodehelper(char *path, char **argv, char **envp, int wait)
+call_usermodehelper(char *path, char **argv, char **envp, enum umh_wait wait)
 {
-	return call_usermodehelper_keys(path, argv, envp, NULL, wait);
+	struct subprocess_info *info;
+
+	info = call_usermodehelper_setup(path, argv, envp);
+	if (info == NULL)
+		return -ENOMEM;
+	return call_usermodehelper_exec(info, wait);
+}
+
+static inline int
+call_usermodehelper_keys(char *path, char **argv, char **envp,
+			 struct key *session_keyring, enum umh_wait wait)
+{
+	struct subprocess_info *info;
+
+	info = call_usermodehelper_setup(path, argv, envp);
+	if (info == NULL)
+		return -ENOMEM;
+
+	call_usermodehelper_setkeys(info, session_keyring);
+	return call_usermodehelper_exec(info, wait);
 }
 
 extern void usermodehelper_init(void);
diff --git a/include/linux/major.h b/include/linux/major.h
index 7e7c909..0cb9805 100644
--- a/include/linux/major.h
+++ b/include/linux/major.h
@@ -158,6 +158,8 @@
 #define VXSPEC_MAJOR		200	/* VERITAS volume config driver */
 #define VXDMP_MAJOR		201	/* VERITAS volume multipath driver */
 
+#define XENVBD_MAJOR		202	/* Xen virtual block device */
+
 #define MSR_MAJOR		202
 #define CPUID_MAJOR		203
 
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index ae2d79f..731cd2a 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -92,6 +92,7 @@
 
 /* PG_owner_priv_1 users should have descriptive aliases */
 #define PG_checked		PG_owner_priv_1 /* Used by some filesystems */
+#define PG_pinned		PG_owner_priv_1	/* Xen pinned pagetable */
 
 #if (BITS_PER_LONG > 32)
 /*
@@ -170,6 +171,10 @@
 #define SetPageChecked(page)	set_bit(PG_checked, &(page)->flags)
 #define ClearPageChecked(page)	clear_bit(PG_checked, &(page)->flags)
 
+#define PagePinned(page)	test_bit(PG_pinned, &(page)->flags)
+#define SetPagePinned(page)	set_bit(PG_pinned, &(page)->flags)
+#define ClearPagePinned(page)	clear_bit(PG_pinned, &(page)->flags)
+
 #define PageReserved(page)	test_bit(PG_reserved, &(page)->flags)
 #define SetPageReserved(page)	set_bit(PG_reserved, &(page)->flags)
 #define ClearPageReserved(page)	clear_bit(PG_reserved, &(page)->flags)
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index 1dd1c70..85ea63f 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -67,6 +67,11 @@
 
 void ctrl_alt_del(void);
 
+#define POWEROFF_CMD_PATH_LEN	256
+extern char poweroff_cmd[POWEROFF_CMD_PATH_LEN];
+
+extern int orderly_poweroff(bool force);
+
 /*
  * Emergency restart, callable from an interrupt handler.
  */
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 706ee9a..8518fa2 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -60,6 +60,8 @@
 void serial8250_suspend_port(int line);
 void serial8250_resume_port(int line);
 
+extern int early_serial_setup(struct uart_port *port);
+
 extern int serial8250_find_port(struct uart_port *p);
 extern int serial8250_find_port_for_earlycon(void);
 extern int setup_early_serial8250_console(char *cmdline);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 9c721cd..773d8d8 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -62,8 +62,9 @@
 /* NEC v850.  */
 #define PORT_V850E_UART	40
 
-/* DZ */
-#define PORT_DZ		47
+/* DEC */
+#define PORT_DZ		46
+#define PORT_ZS		47
 
 /* Parisc type numbers. */
 #define PORT_MUX	48
diff --git a/include/linux/string.h b/include/linux/string.h
index 7f2eb6a..836062b 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -105,8 +105,12 @@
 #endif
 
 extern char *kstrdup(const char *s, gfp_t gfp);
+extern char *kstrndup(const char *s, size_t len, gfp_t gfp);
 extern void *kmemdup(const void *src, size_t len, gfp_t gfp);
 
+extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
+extern void argv_free(char **argv);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 132b260..c2b10ca 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -70,6 +70,10 @@
 			struct page ***pages);
 extern void unmap_kernel_range(unsigned long addr, unsigned long size);
 
+/* Allocate/destroy a 'vmalloc' VM area. */
+extern struct vm_struct *alloc_vm_area(size_t size);
+extern void free_vm_area(struct vm_struct *area);
+
 /*
  *	Internals.  Dont't use..
  */
diff --git a/include/xen/events.h b/include/xen/events.h
new file mode 100644
index 0000000..2bde54d
--- /dev/null
+++ b/include/xen/events.h
@@ -0,0 +1,48 @@
+#ifndef _XEN_EVENTS_H
+#define _XEN_EVENTS_H
+
+#include <linux/interrupt.h>
+
+#include <xen/interface/event_channel.h>
+#include <asm/xen/hypercall.h>
+
+enum ipi_vector {
+	XEN_RESCHEDULE_VECTOR,
+	XEN_CALL_FUNCTION_VECTOR,
+
+	XEN_NR_IPIS,
+};
+
+int bind_evtchn_to_irq(unsigned int evtchn);
+int bind_evtchn_to_irqhandler(unsigned int evtchn,
+			      irq_handler_t handler,
+			      unsigned long irqflags, const char *devname,
+			      void *dev_id);
+int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu,
+			    irq_handler_t handler,
+			    unsigned long irqflags, const char *devname,
+			    void *dev_id);
+int bind_ipi_to_irqhandler(enum ipi_vector ipi,
+			   unsigned int cpu,
+			   irq_handler_t handler,
+			   unsigned long irqflags,
+			   const char *devname,
+			   void *dev_id);
+
+/*
+ * Common unbind function for all event sources. Takes IRQ to unbind from.
+ * Automatically closes the underlying event channel (even for bindings
+ * made with bind_evtchn_to_irqhandler()).
+ */
+void unbind_from_irqhandler(unsigned int irq, void *dev_id);
+
+void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector);
+
+static inline void notify_remote_via_evtchn(int port)
+{
+	struct evtchn_send send = { .port = port };
+	(void)HYPERVISOR_event_channel_op(EVTCHNOP_send, &send);
+}
+
+extern void notify_remote_via_irq(int irq);
+#endif	/* _XEN_EVENTS_H */
diff --git a/include/xen/features.h b/include/xen/features.h
new file mode 100644
index 0000000..27292d4
--- /dev/null
+++ b/include/xen/features.h
@@ -0,0 +1,23 @@
+/******************************************************************************
+ * features.h
+ *
+ * Query the features reported by Xen.
+ *
+ * Copyright (c) 2006, Ian Campbell
+ */
+
+#ifndef __XEN_FEATURES_H__
+#define __XEN_FEATURES_H__
+
+#include <xen/interface/features.h>
+
+void xen_setup_features(void);
+
+extern u8 xen_features[XENFEAT_NR_SUBMAPS * 32];
+
+static inline int xen_feature(int flag)
+{
+	return xen_features[flag];
+}
+
+#endif /* __ASM_XEN_FEATURES_H__ */
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
new file mode 100644
index 0000000..761c834
--- /dev/null
+++ b/include/xen/grant_table.h
@@ -0,0 +1,107 @@
+/******************************************************************************
+ * grant_table.h
+ *
+ * Two sets of functionality:
+ * 1. Granting foreign access to our memory reservation.
+ * 2. Accessing others' memory reservations via grant references.
+ * (i.e., mechanisms for both sender and recipient of grant references)
+ *
+ * Copyright (c) 2004-2005, K A Fraser
+ * Copyright (c) 2005, Christopher Clark
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __ASM_GNTTAB_H__
+#define __ASM_GNTTAB_H__
+
+#include <asm/xen/hypervisor.h>
+#include <xen/interface/grant_table.h>
+
+/* NR_GRANT_FRAMES must be less than or equal to that configured in Xen */
+#define NR_GRANT_FRAMES 4
+
+struct gnttab_free_callback {
+	struct gnttab_free_callback *next;
+	void (*fn)(void *);
+	void *arg;
+	u16 count;
+};
+
+int gnttab_grant_foreign_access(domid_t domid, unsigned long frame,
+				int readonly);
+
+/*
+ * End access through the given grant reference, iff the grant entry is no
+ * longer in use.  Return 1 if the grant entry was freed, 0 if it is still in
+ * use.
+ */
+int gnttab_end_foreign_access_ref(grant_ref_t ref, int readonly);
+
+/*
+ * Eventually end access through the given grant reference, and once that
+ * access has been ended, free the given page too.  Access will be ended
+ * immediately iff the grant entry is not in use, otherwise it will happen
+ * some time later.  page may be 0, in which case no freeing will occur.
+ */
+void gnttab_end_foreign_access(grant_ref_t ref, int readonly,
+			       unsigned long page);
+
+int gnttab_grant_foreign_transfer(domid_t domid, unsigned long pfn);
+
+unsigned long gnttab_end_foreign_transfer_ref(grant_ref_t ref);
+unsigned long gnttab_end_foreign_transfer(grant_ref_t ref);
+
+int gnttab_query_foreign_access(grant_ref_t ref);
+
+/*
+ * operations on reserved batches of grant references
+ */
+int gnttab_alloc_grant_references(u16 count, grant_ref_t *pprivate_head);
+
+void gnttab_free_grant_reference(grant_ref_t ref);
+
+void gnttab_free_grant_references(grant_ref_t head);
+
+int gnttab_empty_grant_references(const grant_ref_t *pprivate_head);
+
+int gnttab_claim_grant_reference(grant_ref_t *pprivate_head);
+
+void gnttab_release_grant_reference(grant_ref_t *private_head,
+				    grant_ref_t release);
+
+void gnttab_request_free_callback(struct gnttab_free_callback *callback,
+				  void (*fn)(void *), void *arg, u16 count);
+void gnttab_cancel_free_callback(struct gnttab_free_callback *callback);
+
+void gnttab_grant_foreign_access_ref(grant_ref_t ref, domid_t domid,
+				     unsigned long frame, int readonly);
+
+void gnttab_grant_foreign_transfer_ref(grant_ref_t, domid_t domid,
+				       unsigned long pfn);
+
+#define gnttab_map_vaddr(map) ((void *)(map.host_virt_addr))
+
+#endif /* __ASM_GNTTAB_H__ */
diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h
new file mode 100644
index 0000000..21c0ecf
--- /dev/null
+++ b/include/xen/hvc-console.h
@@ -0,0 +1,6 @@
+#ifndef XEN_HVC_CONSOLE_H
+#define XEN_HVC_CONSOLE_H
+
+extern struct console xenboot_console;
+
+#endif	/* XEN_HVC_CONSOLE_H */
diff --git a/include/xen/interface/elfnote.h b/include/xen/interface/elfnote.h
new file mode 100644
index 0000000..a64d3df
--- /dev/null
+++ b/include/xen/interface/elfnote.h
@@ -0,0 +1,133 @@
+/******************************************************************************
+ * elfnote.h
+ *
+ * Definitions used for the Xen ELF notes.
+ *
+ * Copyright (c) 2006, Ian Campbell, XenSource Ltd.
+ */
+
+#ifndef __XEN_PUBLIC_ELFNOTE_H__
+#define __XEN_PUBLIC_ELFNOTE_H__
+
+/*
+ * The notes should live in a SHT_NOTE segment and have "Xen" in the
+ * name field.
+ *
+ * Numeric types are either 4 or 8 bytes depending on the content of
+ * the desc field.
+ *
+ * LEGACY indicated the fields in the legacy __xen_guest string which
+ * this a note type replaces.
+ */
+
+/*
+ * NAME=VALUE pair (string).
+ *
+ * LEGACY: FEATURES and PAE
+ */
+#define XEN_ELFNOTE_INFO           0
+
+/*
+ * The virtual address of the entry point (numeric).
+ *
+ * LEGACY: VIRT_ENTRY
+ */
+#define XEN_ELFNOTE_ENTRY          1
+
+/* The virtual address of the hypercall transfer page (numeric).
+ *
+ * LEGACY: HYPERCALL_PAGE. (n.b. legacy value is a physical page
+ * number not a virtual address)
+ */
+#define XEN_ELFNOTE_HYPERCALL_PAGE 2
+
+/* The virtual address where the kernel image should be mapped (numeric).
+ *
+ * Defaults to 0.
+ *
+ * LEGACY: VIRT_BASE
+ */
+#define XEN_ELFNOTE_VIRT_BASE      3
+
+/*
+ * The offset of the ELF paddr field from the acutal required
+ * psuedo-physical address (numeric).
+ *
+ * This is used to maintain backwards compatibility with older kernels
+ * which wrote __PAGE_OFFSET into that field. This field defaults to 0
+ * if not present.
+ *
+ * LEGACY: ELF_PADDR_OFFSET. (n.b. legacy default is VIRT_BASE)
+ */
+#define XEN_ELFNOTE_PADDR_OFFSET   4
+
+/*
+ * The version of Xen that we work with (string).
+ *
+ * LEGACY: XEN_VER
+ */
+#define XEN_ELFNOTE_XEN_VERSION    5
+
+/*
+ * The name of the guest operating system (string).
+ *
+ * LEGACY: GUEST_OS
+ */
+#define XEN_ELFNOTE_GUEST_OS       6
+
+/*
+ * The version of the guest operating system (string).
+ *
+ * LEGACY: GUEST_VER
+ */
+#define XEN_ELFNOTE_GUEST_VERSION  7
+
+/*
+ * The loader type (string).
+ *
+ * LEGACY: LOADER
+ */
+#define XEN_ELFNOTE_LOADER         8
+
+/*
+ * The kernel supports PAE (x86/32 only, string = "yes" or "no").
+ *
+ * LEGACY: PAE (n.b. The legacy interface included a provision to
+ * indicate 'extended-cr3' support allowing L3 page tables to be
+ * placed above 4G. It is assumed that any kernel new enough to use
+ * these ELF notes will include this and therefore "yes" here is
+ * equivalent to "yes[entended-cr3]" in the __xen_guest interface.
+ */
+#define XEN_ELFNOTE_PAE_MODE       9
+
+/*
+ * The features supported/required by this kernel (string).
+ *
+ * The string must consist of a list of feature names (as given in
+ * features.h, without the "XENFEAT_" prefix) separated by '|'
+ * characters. If a feature is required for the kernel to function
+ * then the feature name must be preceded by a '!' character.
+ *
+ * LEGACY: FEATURES
+ */
+#define XEN_ELFNOTE_FEATURES      10
+
+/*
+ * The kernel requires the symbol table to be loaded (string = "yes" or "no")
+ * LEGACY: BSD_SYMTAB (n.b. The legacy treated the presence or absence
+ * of this string as a boolean flag rather than requiring "yes" or
+ * "no".
+ */
+#define XEN_ELFNOTE_BSD_SYMTAB    11
+
+#endif /* __XEN_PUBLIC_ELFNOTE_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-set-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/include/xen/interface/event_channel.h b/include/xen/interface/event_channel.h
new file mode 100644
index 0000000..919b5bd
--- /dev/null
+++ b/include/xen/interface/event_channel.h
@@ -0,0 +1,195 @@
+/******************************************************************************
+ * event_channel.h
+ *
+ * Event channels between domains.
+ *
+ * Copyright (c) 2003-2004, K A Fraser.
+ */
+
+#ifndef __XEN_PUBLIC_EVENT_CHANNEL_H__
+#define __XEN_PUBLIC_EVENT_CHANNEL_H__
+
+typedef uint32_t evtchn_port_t;
+DEFINE_GUEST_HANDLE(evtchn_port_t);
+
+/*
+ * EVTCHNOP_alloc_unbound: Allocate a port in domain <dom> and mark as
+ * accepting interdomain bindings from domain <remote_dom>. A fresh port
+ * is allocated in <dom> and returned as <port>.
+ * NOTES:
+ *  1. If the caller is unprivileged then <dom> must be DOMID_SELF.
+ *  2. <rdom> may be DOMID_SELF, allowing loopback connections.
+ */
+#define EVTCHNOP_alloc_unbound	  6
+struct evtchn_alloc_unbound {
+	/* IN parameters */
+	domid_t dom, remote_dom;
+	/* OUT parameters */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_interdomain: Construct an interdomain event channel between
+ * the calling domain and <remote_dom>. <remote_dom,remote_port> must identify
+ * a port that is unbound and marked as accepting bindings from the calling
+ * domain. A fresh port is allocated in the calling domain and returned as
+ * <local_port>.
+ * NOTES:
+ *  2. <remote_dom> may be DOMID_SELF, allowing loopback connections.
+ */
+#define EVTCHNOP_bind_interdomain 0
+struct evtchn_bind_interdomain {
+	/* IN parameters. */
+	domid_t remote_dom;
+	evtchn_port_t remote_port;
+	/* OUT parameters. */
+	evtchn_port_t local_port;
+};
+
+/*
+ * EVTCHNOP_bind_virq: Bind a local event channel to VIRQ <irq> on specified
+ * vcpu.
+ * NOTES:
+ *  1. A virtual IRQ may be bound to at most one event channel per vcpu.
+ *  2. The allocated event channel is bound to the specified vcpu. The binding
+ *     may not be changed.
+ */
+#define EVTCHNOP_bind_virq	  1
+struct evtchn_bind_virq {
+	/* IN parameters. */
+	uint32_t virq;
+	uint32_t vcpu;
+	/* OUT parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_pirq: Bind a local event channel to PIRQ <irq>.
+ * NOTES:
+ *  1. A physical IRQ may be bound to at most one event channel per domain.
+ *  2. Only a sufficiently-privileged domain may bind to a physical IRQ.
+ */
+#define EVTCHNOP_bind_pirq	  2
+struct evtchn_bind_pirq {
+	/* IN parameters. */
+	uint32_t pirq;
+#define BIND_PIRQ__WILL_SHARE 1
+	uint32_t flags; /* BIND_PIRQ__* */
+	/* OUT parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_ipi: Bind a local event channel to receive events.
+ * NOTES:
+ *  1. The allocated event channel is bound to the specified vcpu. The binding
+ *     may not be changed.
+ */
+#define EVTCHNOP_bind_ipi	  7
+struct evtchn_bind_ipi {
+	uint32_t vcpu;
+	/* OUT parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_close: Close a local event channel <port>. If the channel is
+ * interdomain then the remote end is placed in the unbound state
+ * (EVTCHNSTAT_unbound), awaiting a new connection.
+ */
+#define EVTCHNOP_close		  3
+struct evtchn_close {
+	/* IN parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_send: Send an event to the remote end of the channel whose local
+ * endpoint is <port>.
+ */
+#define EVTCHNOP_send		  4
+struct evtchn_send {
+	/* IN parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_status: Get the current status of the communication channel which
+ * has an endpoint at <dom, port>.
+ * NOTES:
+ *  1. <dom> may be specified as DOMID_SELF.
+ *  2. Only a sufficiently-privileged domain may obtain the status of an event
+ *     channel for which <dom> is not DOMID_SELF.
+ */
+#define EVTCHNOP_status		  5
+struct evtchn_status {
+	/* IN parameters */
+	domid_t  dom;
+	evtchn_port_t port;
+	/* OUT parameters */
+#define EVTCHNSTAT_closed	0  /* Channel is not in use.		     */
+#define EVTCHNSTAT_unbound	1  /* Channel is waiting interdom connection.*/
+#define EVTCHNSTAT_interdomain	2  /* Channel is connected to remote domain. */
+#define EVTCHNSTAT_pirq		3  /* Channel is bound to a phys IRQ line.   */
+#define EVTCHNSTAT_virq		4  /* Channel is bound to a virtual IRQ line */
+#define EVTCHNSTAT_ipi		5  /* Channel is bound to a virtual IPI line */
+	uint32_t status;
+	uint32_t vcpu;		   /* VCPU to which this channel is bound.   */
+	union {
+		struct {
+			domid_t dom;
+		} unbound; /* EVTCHNSTAT_unbound */
+		struct {
+			domid_t dom;
+			evtchn_port_t port;
+		} interdomain; /* EVTCHNSTAT_interdomain */
+		uint32_t pirq;	    /* EVTCHNSTAT_pirq	      */
+		uint32_t virq;	    /* EVTCHNSTAT_virq	      */
+	} u;
+};
+
+/*
+ * EVTCHNOP_bind_vcpu: Specify which vcpu a channel should notify when an
+ * event is pending.
+ * NOTES:
+ *  1. IPI- and VIRQ-bound channels always notify the vcpu that initialised
+ *     the binding. This binding cannot be changed.
+ *  2. All other channels notify vcpu0 by default. This default is set when
+ *     the channel is allocated (a port that is freed and subsequently reused
+ *     has its binding reset to vcpu0).
+ */
+#define EVTCHNOP_bind_vcpu	  8
+struct evtchn_bind_vcpu {
+	/* IN parameters. */
+	evtchn_port_t port;
+	uint32_t vcpu;
+};
+
+/*
+ * EVTCHNOP_unmask: Unmask the specified local event-channel port and deliver
+ * a notification to the appropriate VCPU if an event is pending.
+ */
+#define EVTCHNOP_unmask		  9
+struct evtchn_unmask {
+	/* IN parameters. */
+	evtchn_port_t port;
+};
+
+struct evtchn_op {
+	uint32_t cmd; /* EVTCHNOP_* */
+	union {
+		struct evtchn_alloc_unbound    alloc_unbound;
+		struct evtchn_bind_interdomain bind_interdomain;
+		struct evtchn_bind_virq	       bind_virq;
+		struct evtchn_bind_pirq	       bind_pirq;
+		struct evtchn_bind_ipi	       bind_ipi;
+		struct evtchn_close	       close;
+		struct evtchn_send	       send;
+		struct evtchn_status	       status;
+		struct evtchn_bind_vcpu	       bind_vcpu;
+		struct evtchn_unmask	       unmask;
+	} u;
+};
+DEFINE_GUEST_HANDLE_STRUCT(evtchn_op);
+
+#endif /* __XEN_PUBLIC_EVENT_CHANNEL_H__ */
diff --git a/include/xen/interface/features.h b/include/xen/interface/features.h
new file mode 100644
index 0000000..d73228d
--- /dev/null
+++ b/include/xen/interface/features.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ * features.h
+ *
+ * Feature flags, reported by XENVER_get_features.
+ *
+ * Copyright (c) 2006, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_FEATURES_H__
+#define __XEN_PUBLIC_FEATURES_H__
+
+/*
+ * If set, the guest does not need to write-protect its pagetables, and can
+ * update them via direct writes.
+ */
+#define XENFEAT_writable_page_tables       0
+
+/*
+ * If set, the guest does not need to write-protect its segment descriptor
+ * tables, and can update them via direct writes.
+ */
+#define XENFEAT_writable_descriptor_tables 1
+
+/*
+ * If set, translation between the guest's 'pseudo-physical' address space
+ * and the host's machine address space are handled by the hypervisor. In this
+ * mode the guest does not need to perform phys-to/from-machine translations
+ * when performing page table operations.
+ */
+#define XENFEAT_auto_translated_physmap    2
+
+/* If set, the guest is running in supervisor mode (e.g., x86 ring 0). */
+#define XENFEAT_supervisor_mode_kernel     3
+
+/*
+ * If set, the guest does not need to allocate x86 PAE page directories
+ * below 4GB. This flag is usually implied by auto_translated_physmap.
+ */
+#define XENFEAT_pae_pgdir_above_4gb        4
+
+#define XENFEAT_NR_SUBMAPS 1
+
+#endif /* __XEN_PUBLIC_FEATURES_H__ */
diff --git a/include/xen/interface/grant_table.h b/include/xen/interface/grant_table.h
new file mode 100644
index 0000000..2190498
--- /dev/null
+++ b/include/xen/interface/grant_table.h
@@ -0,0 +1,375 @@
+/******************************************************************************
+ * grant_table.h
+ *
+ * Interface for granting foreign access to page frames, and receiving
+ * page-ownership transfers.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __XEN_PUBLIC_GRANT_TABLE_H__
+#define __XEN_PUBLIC_GRANT_TABLE_H__
+
+
+/***********************************
+ * GRANT TABLE REPRESENTATION
+ */
+
+/* Some rough guidelines on accessing and updating grant-table entries
+ * in a concurrency-safe manner. For more information, Linux contains a
+ * reference implementation for guest OSes (arch/xen/kernel/grant_table.c).
+ *
+ * NB. WMB is a no-op on current-generation x86 processors. However, a
+ *     compiler barrier will still be required.
+ *
+ * Introducing a valid entry into the grant table:
+ *  1. Write ent->domid.
+ *  2. Write ent->frame:
+ *      GTF_permit_access:   Frame to which access is permitted.
+ *      GTF_accept_transfer: Pseudo-phys frame slot being filled by new
+ *                           frame, or zero if none.
+ *  3. Write memory barrier (WMB).
+ *  4. Write ent->flags, inc. valid type.
+ *
+ * Invalidating an unused GTF_permit_access entry:
+ *  1. flags = ent->flags.
+ *  2. Observe that !(flags & (GTF_reading|GTF_writing)).
+ *  3. Check result of SMP-safe CMPXCHG(&ent->flags, flags, 0).
+ *  NB. No need for WMB as reuse of entry is control-dependent on success of
+ *      step 3, and all architectures guarantee ordering of ctrl-dep writes.
+ *
+ * Invalidating an in-use GTF_permit_access entry:
+ *  This cannot be done directly. Request assistance from the domain controller
+ *  which can set a timeout on the use of a grant entry and take necessary
+ *  action. (NB. This is not yet implemented!).
+ *
+ * Invalidating an unused GTF_accept_transfer entry:
+ *  1. flags = ent->flags.
+ *  2. Observe that !(flags & GTF_transfer_committed). [*]
+ *  3. Check result of SMP-safe CMPXCHG(&ent->flags, flags, 0).
+ *  NB. No need for WMB as reuse of entry is control-dependent on success of
+ *      step 3, and all architectures guarantee ordering of ctrl-dep writes.
+ *  [*] If GTF_transfer_committed is set then the grant entry is 'committed'.
+ *      The guest must /not/ modify the grant entry until the address of the
+ *      transferred frame is written. It is safe for the guest to spin waiting
+ *      for this to occur (detect by observing GTF_transfer_completed in
+ *      ent->flags).
+ *
+ * Invalidating a committed GTF_accept_transfer entry:
+ *  1. Wait for (ent->flags & GTF_transfer_completed).
+ *
+ * Changing a GTF_permit_access from writable to read-only:
+ *  Use SMP-safe CMPXCHG to set GTF_readonly, while checking !GTF_writing.
+ *
+ * Changing a GTF_permit_access from read-only to writable:
+ *  Use SMP-safe bit-setting instruction.
+ */
+
+/*
+ * A grant table comprises a packed array of grant entries in one or more
+ * page frames shared between Xen and a guest.
+ * [XEN]: This field is written by Xen and read by the sharing guest.
+ * [GST]: This field is written by the guest and read by Xen.
+ */
+struct grant_entry {
+    /* GTF_xxx: various type and flag information.  [XEN,GST] */
+    uint16_t flags;
+    /* The domain being granted foreign privileges. [GST] */
+    domid_t  domid;
+    /*
+     * GTF_permit_access: Frame that @domid is allowed to map and access. [GST]
+     * GTF_accept_transfer: Frame whose ownership transferred by @domid. [XEN]
+     */
+    uint32_t frame;
+};
+
+/*
+ * Type of grant entry.
+ *  GTF_invalid: This grant entry grants no privileges.
+ *  GTF_permit_access: Allow @domid to map/access @frame.
+ *  GTF_accept_transfer: Allow @domid to transfer ownership of one page frame
+ *                       to this guest. Xen writes the page number to @frame.
+ */
+#define GTF_invalid         (0U<<0)
+#define GTF_permit_access   (1U<<0)
+#define GTF_accept_transfer (2U<<0)
+#define GTF_type_mask       (3U<<0)
+
+/*
+ * Subflags for GTF_permit_access.
+ *  GTF_readonly: Restrict @domid to read-only mappings and accesses. [GST]
+ *  GTF_reading: Grant entry is currently mapped for reading by @domid. [XEN]
+ *  GTF_writing: Grant entry is currently mapped for writing by @domid. [XEN]
+ */
+#define _GTF_readonly       (2)
+#define GTF_readonly        (1U<<_GTF_readonly)
+#define _GTF_reading        (3)
+#define GTF_reading         (1U<<_GTF_reading)
+#define _GTF_writing        (4)
+#define GTF_writing         (1U<<_GTF_writing)
+
+/*
+ * Subflags for GTF_accept_transfer:
+ *  GTF_transfer_committed: Xen sets this flag to indicate that it is committed
+ *      to transferring ownership of a page frame. When a guest sees this flag
+ *      it must /not/ modify the grant entry until GTF_transfer_completed is
+ *      set by Xen.
+ *  GTF_transfer_completed: It is safe for the guest to spin-wait on this flag
+ *      after reading GTF_transfer_committed. Xen will always write the frame
+ *      address, followed by ORing this flag, in a timely manner.
+ */
+#define _GTF_transfer_committed (2)
+#define GTF_transfer_committed  (1U<<_GTF_transfer_committed)
+#define _GTF_transfer_completed (3)
+#define GTF_transfer_completed  (1U<<_GTF_transfer_completed)
+
+
+/***********************************
+ * GRANT TABLE QUERIES AND USES
+ */
+
+/*
+ * Reference to a grant entry in a specified domain's grant table.
+ */
+typedef uint32_t grant_ref_t;
+
+/*
+ * Handle to track a mapping created via a grant reference.
+ */
+typedef uint32_t grant_handle_t;
+
+/*
+ * GNTTABOP_map_grant_ref: Map the grant entry (<dom>,<ref>) for access
+ * by devices and/or host CPUs. If successful, <handle> is a tracking number
+ * that must be presented later to destroy the mapping(s). On error, <handle>
+ * is a negative status code.
+ * NOTES:
+ *  1. If GNTMAP_device_map is specified then <dev_bus_addr> is the address
+ *     via which I/O devices may access the granted frame.
+ *  2. If GNTMAP_host_map is specified then a mapping will be added at
+ *     either a host virtual address in the current address space, or at
+ *     a PTE at the specified machine address.  The type of mapping to
+ *     perform is selected through the GNTMAP_contains_pte flag, and the
+ *     address is specified in <host_addr>.
+ *  3. Mappings should only be destroyed via GNTTABOP_unmap_grant_ref. If a
+ *     host mapping is destroyed by other means then it is *NOT* guaranteed
+ *     to be accounted to the correct grant reference!
+ */
+#define GNTTABOP_map_grant_ref        0
+struct gnttab_map_grant_ref {
+    /* IN parameters. */
+    uint64_t host_addr;
+    uint32_t flags;               /* GNTMAP_* */
+    grant_ref_t ref;
+    domid_t  dom;
+    /* OUT parameters. */
+    int16_t  status;              /* GNTST_* */
+    grant_handle_t handle;
+    uint64_t dev_bus_addr;
+};
+
+/*
+ * GNTTABOP_unmap_grant_ref: Destroy one or more grant-reference mappings
+ * tracked by <handle>. If <host_addr> or <dev_bus_addr> is zero, that
+ * field is ignored. If non-zero, they must refer to a device/host mapping
+ * that is tracked by <handle>
+ * NOTES:
+ *  1. The call may fail in an undefined manner if either mapping is not
+ *     tracked by <handle>.
+ *  3. After executing a batch of unmaps, it is guaranteed that no stale
+ *     mappings will remain in the device or host TLBs.
+ */
+#define GNTTABOP_unmap_grant_ref      1
+struct gnttab_unmap_grant_ref {
+    /* IN parameters. */
+    uint64_t host_addr;
+    uint64_t dev_bus_addr;
+    grant_handle_t handle;
+    /* OUT parameters. */
+    int16_t  status;              /* GNTST_* */
+};
+
+/*
+ * GNTTABOP_setup_table: Set up a grant table for <dom> comprising at least
+ * <nr_frames> pages. The frame addresses are written to the <frame_list>.
+ * Only <nr_frames> addresses are written, even if the table is larger.
+ * NOTES:
+ *  1. <dom> may be specified as DOMID_SELF.
+ *  2. Only a sufficiently-privileged domain may specify <dom> != DOMID_SELF.
+ *  3. Xen may not support more than a single grant-table page per domain.
+ */
+#define GNTTABOP_setup_table          2
+struct gnttab_setup_table {
+    /* IN parameters. */
+    domid_t  dom;
+    uint32_t nr_frames;
+    /* OUT parameters. */
+    int16_t  status;              /* GNTST_* */
+    ulong *frame_list;
+};
+
+/*
+ * GNTTABOP_dump_table: Dump the contents of the grant table to the
+ * xen console. Debugging use only.
+ */
+#define GNTTABOP_dump_table           3
+struct gnttab_dump_table {
+    /* IN parameters. */
+    domid_t dom;
+    /* OUT parameters. */
+    int16_t status;               /* GNTST_* */
+};
+
+/*
+ * GNTTABOP_transfer_grant_ref: Transfer <frame> to a foreign domain. The
+ * foreign domain has previously registered its interest in the transfer via
+ * <domid, ref>.
+ *
+ * Note that, even if the transfer fails, the specified page no longer belongs
+ * to the calling domain *unless* the error is GNTST_bad_page.
+ */
+#define GNTTABOP_transfer                4
+struct gnttab_transfer {
+    /* IN parameters. */
+    unsigned long mfn;
+    domid_t       domid;
+    grant_ref_t   ref;
+    /* OUT parameters. */
+    int16_t       status;
+};
+
+
+/*
+ * GNTTABOP_copy: Hypervisor based copy
+ * source and destinations can be eithers MFNs or, for foreign domains,
+ * grant references. the foreign domain has to grant read/write access
+ * in its grant table.
+ *
+ * The flags specify what type source and destinations are (either MFN
+ * or grant reference).
+ *
+ * Note that this can also be used to copy data between two domains
+ * via a third party if the source and destination domains had previously
+ * grant appropriate access to their pages to the third party.
+ *
+ * source_offset specifies an offset in the source frame, dest_offset
+ * the offset in the target frame and  len specifies the number of
+ * bytes to be copied.
+ */
+
+#define _GNTCOPY_source_gref      (0)
+#define GNTCOPY_source_gref       (1<<_GNTCOPY_source_gref)
+#define _GNTCOPY_dest_gref        (1)
+#define GNTCOPY_dest_gref         (1<<_GNTCOPY_dest_gref)
+
+#define GNTTABOP_copy                 5
+struct gnttab_copy {
+	/* IN parameters. */
+	struct {
+		union {
+			grant_ref_t ref;
+			unsigned long   gmfn;
+		} u;
+		domid_t  domid;
+		uint16_t offset;
+	} source, dest;
+	uint16_t      len;
+	uint16_t      flags;          /* GNTCOPY_* */
+	/* OUT parameters. */
+	int16_t       status;
+};
+
+/*
+ * GNTTABOP_query_size: Query the current and maximum sizes of the shared
+ * grant table.
+ * NOTES:
+ *  1. <dom> may be specified as DOMID_SELF.
+ *  2. Only a sufficiently-privileged domain may specify <dom> != DOMID_SELF.
+ */
+#define GNTTABOP_query_size           6
+struct gnttab_query_size {
+    /* IN parameters. */
+    domid_t  dom;
+    /* OUT parameters. */
+    uint32_t nr_frames;
+    uint32_t max_nr_frames;
+    int16_t  status;              /* GNTST_* */
+};
+
+
+/*
+ * Bitfield values for update_pin_status.flags.
+ */
+ /* Map the grant entry for access by I/O devices. */
+#define _GNTMAP_device_map      (0)
+#define GNTMAP_device_map       (1<<_GNTMAP_device_map)
+ /* Map the grant entry for access by host CPUs. */
+#define _GNTMAP_host_map        (1)
+#define GNTMAP_host_map         (1<<_GNTMAP_host_map)
+ /* Accesses to the granted frame will be restricted to read-only access. */
+#define _GNTMAP_readonly        (2)
+#define GNTMAP_readonly         (1<<_GNTMAP_readonly)
+ /*
+  * GNTMAP_host_map subflag:
+  *  0 => The host mapping is usable only by the guest OS.
+  *  1 => The host mapping is usable by guest OS + current application.
+  */
+#define _GNTMAP_application_map (3)
+#define GNTMAP_application_map  (1<<_GNTMAP_application_map)
+
+ /*
+  * GNTMAP_contains_pte subflag:
+  *  0 => This map request contains a host virtual address.
+  *  1 => This map request contains the machine addess of the PTE to update.
+  */
+#define _GNTMAP_contains_pte    (4)
+#define GNTMAP_contains_pte     (1<<_GNTMAP_contains_pte)
+
+/*
+ * Values for error status returns. All errors are -ve.
+ */
+#define GNTST_okay             (0)  /* Normal return.                        */
+#define GNTST_general_error    (-1) /* General undefined error.              */
+#define GNTST_bad_domain       (-2) /* Unrecognsed domain id.                */
+#define GNTST_bad_gntref       (-3) /* Unrecognised or inappropriate gntref. */
+#define GNTST_bad_handle       (-4) /* Unrecognised or inappropriate handle. */
+#define GNTST_bad_virt_addr    (-5) /* Inappropriate virtual address to map. */
+#define GNTST_bad_dev_addr     (-6) /* Inappropriate device address to unmap.*/
+#define GNTST_no_device_space  (-7) /* Out of space in I/O MMU.              */
+#define GNTST_permission_denied (-8) /* Not enough privilege for operation.  */
+#define GNTST_bad_page         (-9) /* Specified page was invalid for op.    */
+#define GNTST_bad_copy_arg    (-10) /* copy arguments cross page boundary */
+
+#define GNTTABOP_error_msgs {                   \
+    "okay",                                     \
+    "undefined error",                          \
+    "unrecognised domain id",                   \
+    "invalid grant reference",                  \
+    "invalid mapping handle",                   \
+    "invalid virtual address",                  \
+    "invalid device address",                   \
+    "no spare translation slot in the I/O MMU", \
+    "permission denied",                        \
+    "bad page",                                 \
+    "copy arguments cross page boundary"        \
+}
+
+#endif /* __XEN_PUBLIC_GRANT_TABLE_H__ */
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h
new file mode 100644
index 0000000..c2d1fa4
--- /dev/null
+++ b/include/xen/interface/io/blkif.h
@@ -0,0 +1,94 @@
+/******************************************************************************
+ * blkif.h
+ *
+ * Unified block-device I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_BLKIF_H__
+#define __XEN_PUBLIC_IO_BLKIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Front->back notifications: When enqueuing a new request, sending a
+ * notification can be made conditional on req_event (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Backends must set
+ * req_event appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()).
+ *
+ * Back->front notifications: When enqueuing a new response, sending a
+ * notification can be made conditional on rsp_event (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Frontends must set
+ * rsp_event appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()).
+ */
+
+typedef uint16_t blkif_vdev_t;
+typedef uint64_t blkif_sector_t;
+
+/*
+ * REQUEST CODES.
+ */
+#define BLKIF_OP_READ              0
+#define BLKIF_OP_WRITE             1
+/*
+ * Recognised only if "feature-barrier" is present in backend xenbus info.
+ * The "feature_barrier" node contains a boolean indicating whether barrier
+ * requests are likely to succeed or fail. Either way, a barrier request
+ * may fail at any time with BLKIF_RSP_EOPNOTSUPP if it is unsupported by
+ * the underlying block-device hardware. The boolean simply indicates whether
+ * or not it is worthwhile for the frontend to attempt barrier requests.
+ * If a backend does not recognise BLKIF_OP_WRITE_BARRIER, it should *not*
+ * create the "feature-barrier" node!
+ */
+#define BLKIF_OP_WRITE_BARRIER     2
+
+/*
+ * Maximum scatter/gather segments per request.
+ * This is carefully chosen so that sizeof(struct blkif_ring) <= PAGE_SIZE.
+ * NB. This could be 12 if the ring indexes weren't stored in the same page.
+ */
+#define BLKIF_MAX_SEGMENTS_PER_REQUEST 11
+
+struct blkif_request {
+	uint8_t        operation;    /* BLKIF_OP_???                         */
+	uint8_t        nr_segments;  /* number of segments                   */
+	blkif_vdev_t   handle;       /* only for read/write requests         */
+	uint64_t       id;           /* private guest value, echoed in resp  */
+	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
+	struct blkif_request_segment {
+		grant_ref_t gref;        /* reference to I/O buffer frame        */
+		/* @first_sect: first sector in frame to transfer (inclusive).   */
+		/* @last_sect: last sector in frame to transfer (inclusive).     */
+		uint8_t     first_sect, last_sect;
+	} seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+};
+
+struct blkif_response {
+	uint64_t        id;              /* copied from request */
+	uint8_t         operation;       /* copied from request */
+	int16_t         status;          /* BLKIF_RSP_???       */
+};
+
+/*
+ * STATUS RETURN CODES.
+ */
+ /* Operation not supported (only happens on barrier writes). */
+#define BLKIF_RSP_EOPNOTSUPP  -2
+ /* Operation failed for some unspecified reason (-EIO). */
+#define BLKIF_RSP_ERROR       -1
+ /* Operation completed successfully. */
+#define BLKIF_RSP_OKAY         0
+
+/*
+ * Generate blkif ring structures and types.
+ */
+
+DEFINE_RING_TYPES(blkif, struct blkif_request, struct blkif_response);
+
+#define VDISK_CDROM        0x1
+#define VDISK_REMOVABLE    0x2
+#define VDISK_READONLY     0x4
+
+#endif /* __XEN_PUBLIC_IO_BLKIF_H__ */
diff --git a/include/xen/interface/io/console.h b/include/xen/interface/io/console.h
new file mode 100644
index 0000000..e563de7
--- /dev/null
+++ b/include/xen/interface/io/console.h
@@ -0,0 +1,23 @@
+/******************************************************************************
+ * console.h
+ *
+ * Console I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2005, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_CONSOLE_H__
+#define __XEN_PUBLIC_IO_CONSOLE_H__
+
+typedef uint32_t XENCONS_RING_IDX;
+
+#define MASK_XENCONS_IDX(idx, ring) ((idx) & (sizeof(ring)-1))
+
+struct xencons_interface {
+    char in[1024];
+    char out[2048];
+    XENCONS_RING_IDX in_cons, in_prod;
+    XENCONS_RING_IDX out_cons, out_prod;
+};
+
+#endif /* __XEN_PUBLIC_IO_CONSOLE_H__ */
diff --git a/include/xen/interface/io/netif.h b/include/xen/interface/io/netif.h
new file mode 100644
index 0000000..518481c
--- /dev/null
+++ b/include/xen/interface/io/netif.h
@@ -0,0 +1,158 @@
+/******************************************************************************
+ * netif.h
+ *
+ * Unified network-device I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_NETIF_H__
+#define __XEN_PUBLIC_IO_NETIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Notifications after enqueuing any type of message should be conditional on
+ * the appropriate req_event or rsp_event field in the shared ring.
+ * If the client sends notification for rx requests then it should specify
+ * feature 'feature-rx-notify' via xenbus. Otherwise the backend will assume
+ * that it cannot safely queue packets (as it may not be kicked to send them).
+ */
+
+/*
+ * This is the 'wire' format for packets:
+ *  Request 1: netif_tx_request -- NETTXF_* (any flags)
+ * [Request 2: netif_tx_extra]  (only if request 1 has NETTXF_extra_info)
+ * [Request 3: netif_tx_extra]  (only if request 2 has XEN_NETIF_EXTRA_MORE)
+ *  Request 4: netif_tx_request -- NETTXF_more_data
+ *  Request 5: netif_tx_request -- NETTXF_more_data
+ *  ...
+ *  Request N: netif_tx_request -- 0
+ */
+
+/* Protocol checksum field is blank in the packet (hardware offload)? */
+#define _NETTXF_csum_blank     (0)
+#define  NETTXF_csum_blank     (1U<<_NETTXF_csum_blank)
+
+/* Packet data has been validated against protocol checksum. */
+#define _NETTXF_data_validated (1)
+#define  NETTXF_data_validated (1U<<_NETTXF_data_validated)
+
+/* Packet continues in the next request descriptor. */
+#define _NETTXF_more_data      (2)
+#define  NETTXF_more_data      (1U<<_NETTXF_more_data)
+
+/* Packet to be followed by extra descriptor(s). */
+#define _NETTXF_extra_info     (3)
+#define  NETTXF_extra_info     (1U<<_NETTXF_extra_info)
+
+struct xen_netif_tx_request {
+    grant_ref_t gref;      /* Reference to buffer page */
+    uint16_t offset;       /* Offset within buffer page */
+    uint16_t flags;        /* NETTXF_* */
+    uint16_t id;           /* Echoed in response message. */
+    uint16_t size;         /* Packet size in bytes.       */
+};
+
+/* Types of netif_extra_info descriptors. */
+#define XEN_NETIF_EXTRA_TYPE_NONE  (0)  /* Never used - invalid */
+#define XEN_NETIF_EXTRA_TYPE_GSO   (1)  /* u.gso */
+#define XEN_NETIF_EXTRA_TYPE_MAX   (2)
+
+/* netif_extra_info flags. */
+#define _XEN_NETIF_EXTRA_FLAG_MORE (0)
+#define XEN_NETIF_EXTRA_FLAG_MORE  (1U<<_XEN_NETIF_EXTRA_FLAG_MORE)
+
+/* GSO types - only TCPv4 currently supported. */
+#define XEN_NETIF_GSO_TYPE_TCPV4        (1)
+
+/*
+ * This structure needs to fit within both netif_tx_request and
+ * netif_rx_response for compatibility.
+ */
+struct xen_netif_extra_info {
+	uint8_t type;  /* XEN_NETIF_EXTRA_TYPE_* */
+	uint8_t flags; /* XEN_NETIF_EXTRA_FLAG_* */
+
+	union {
+		struct {
+			/*
+			 * Maximum payload size of each segment. For
+			 * example, for TCP this is just the path MSS.
+			 */
+			uint16_t size;
+
+			/*
+			 * GSO type. This determines the protocol of
+			 * the packet and any extra features required
+			 * to segment the packet properly.
+			 */
+			uint8_t type; /* XEN_NETIF_GSO_TYPE_* */
+
+			/* Future expansion. */
+			uint8_t pad;
+
+			/*
+			 * GSO features. This specifies any extra GSO
+			 * features required to process this packet,
+			 * such as ECN support for TCPv4.
+			 */
+			uint16_t features; /* XEN_NETIF_GSO_FEAT_* */
+		} gso;
+
+		uint16_t pad[3];
+	} u;
+};
+
+struct xen_netif_tx_response {
+	uint16_t id;
+	int16_t  status;       /* NETIF_RSP_* */
+};
+
+struct xen_netif_rx_request {
+	uint16_t    id;        /* Echoed in response message.        */
+	grant_ref_t gref;      /* Reference to incoming granted frame */
+};
+
+/* Packet data has been validated against protocol checksum. */
+#define _NETRXF_data_validated (0)
+#define  NETRXF_data_validated (1U<<_NETRXF_data_validated)
+
+/* Protocol checksum field is blank in the packet (hardware offload)? */
+#define _NETRXF_csum_blank     (1)
+#define  NETRXF_csum_blank     (1U<<_NETRXF_csum_blank)
+
+/* Packet continues in the next request descriptor. */
+#define _NETRXF_more_data      (2)
+#define  NETRXF_more_data      (1U<<_NETRXF_more_data)
+
+/* Packet to be followed by extra descriptor(s). */
+#define _NETRXF_extra_info     (3)
+#define  NETRXF_extra_info     (1U<<_NETRXF_extra_info)
+
+struct xen_netif_rx_response {
+    uint16_t id;
+    uint16_t offset;       /* Offset in page of start of received packet  */
+    uint16_t flags;        /* NETRXF_* */
+    int16_t  status;       /* -ve: BLKIF_RSP_* ; +ve: Rx'ed pkt size. */
+};
+
+/*
+ * Generate netif ring structures and types.
+ */
+
+DEFINE_RING_TYPES(xen_netif_tx,
+		  struct xen_netif_tx_request,
+		  struct xen_netif_tx_response);
+DEFINE_RING_TYPES(xen_netif_rx,
+		  struct xen_netif_rx_request,
+		  struct xen_netif_rx_response);
+
+#define NETIF_RSP_DROPPED         -2
+#define NETIF_RSP_ERROR           -1
+#define NETIF_RSP_OKAY             0
+/* No response: used for auxiliary requests (e.g., netif_tx_extra). */
+#define NETIF_RSP_NULL             1
+
+#endif
diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h
new file mode 100644
index 0000000..e8cbf43
--- /dev/null
+++ b/include/xen/interface/io/ring.h
@@ -0,0 +1,260 @@
+/******************************************************************************
+ * ring.h
+ *
+ * Shared producer-consumer ring macros.
+ *
+ * Tim Deegan and Andrew Warfield November 2004.
+ */
+
+#ifndef __XEN_PUBLIC_IO_RING_H__
+#define __XEN_PUBLIC_IO_RING_H__
+
+typedef unsigned int RING_IDX;
+
+/* Round a 32-bit unsigned constant down to the nearest power of two. */
+#define __RD2(_x)  (((_x) & 0x00000002) ? 0x2		       : ((_x) & 0x1))
+#define __RD4(_x)  (((_x) & 0x0000000c) ? __RD2((_x)>>2)<<2    : __RD2(_x))
+#define __RD8(_x)  (((_x) & 0x000000f0) ? __RD4((_x)>>4)<<4    : __RD4(_x))
+#define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x)>>8)<<8    : __RD8(_x))
+#define __RD32(_x) (((_x) & 0xffff0000) ? __RD16((_x)>>16)<<16 : __RD16(_x))
+
+/*
+ * Calculate size of a shared ring, given the total available space for the
+ * ring and indexes (_sz), and the name tag of the request/response structure.
+ * A ring contains as many entries as will fit, rounded down to the nearest
+ * power of two (so we can mask with (size-1) to loop around).
+ */
+#define __RING_SIZE(_s, _sz) \
+    (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+
+/*
+ * Macros to make the correct C datatypes for a new kind of ring.
+ *
+ * To make a new ring datatype, you need to have two message structures,
+ * let's say struct request, and struct response already defined.
+ *
+ * In a header where you want the ring datatype declared, you then do:
+ *
+ *     DEFINE_RING_TYPES(mytag, struct request, struct response);
+ *
+ * These expand out to give you a set of types, as you can see below.
+ * The most important of these are:
+ *
+ *     struct mytag_sring      - The shared ring.
+ *     struct mytag_front_ring - The 'front' half of the ring.
+ *     struct mytag_back_ring  - The 'back' half of the ring.
+ *
+ * To initialize a ring in your code you need to know the location and size
+ * of the shared memory area (PAGE_SIZE, for instance). To initialise
+ * the front half:
+ *
+ *     struct mytag_front_ring front_ring;
+ *     SHARED_RING_INIT((struct mytag_sring *)shared_page);
+ *     FRONT_RING_INIT(&front_ring, (struct mytag_sring *)shared_page,
+ *		       PAGE_SIZE);
+ *
+ * Initializing the back follows similarly (note that only the front
+ * initializes the shared ring):
+ *
+ *     struct mytag_back_ring back_ring;
+ *     BACK_RING_INIT(&back_ring, (struct mytag_sring *)shared_page,
+ *		      PAGE_SIZE);
+ */
+
+#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t)			\
+									\
+/* Shared ring entry */							\
+union __name##_sring_entry {						\
+    __req_t req;							\
+    __rsp_t rsp;							\
+};									\
+									\
+/* Shared ring page */							\
+struct __name##_sring {							\
+    RING_IDX req_prod, req_event;					\
+    RING_IDX rsp_prod, rsp_event;					\
+    uint8_t  pad[48];							\
+    union __name##_sring_entry ring[1]; /* variable-length */		\
+};									\
+									\
+/* "Front" end's private variables */					\
+struct __name##_front_ring {						\
+    RING_IDX req_prod_pvt;						\
+    RING_IDX rsp_cons;							\
+    unsigned int nr_ents;						\
+    struct __name##_sring *sring;					\
+};									\
+									\
+/* "Back" end's private variables */					\
+struct __name##_back_ring {						\
+    RING_IDX rsp_prod_pvt;						\
+    RING_IDX req_cons;							\
+    unsigned int nr_ents;						\
+    struct __name##_sring *sring;					\
+};
+
+/*
+ * Macros for manipulating rings.
+ *
+ * FRONT_RING_whatever works on the "front end" of a ring: here
+ * requests are pushed on to the ring and responses taken off it.
+ *
+ * BACK_RING_whatever works on the "back end" of a ring: here
+ * requests are taken off the ring and responses put on.
+ *
+ * N.B. these macros do NO INTERLOCKS OR FLOW CONTROL.
+ * This is OK in 1-for-1 request-response situations where the
+ * requestor (front end) never has more than RING_SIZE()-1
+ * outstanding requests.
+ */
+
+/* Initialising empty rings */
+#define SHARED_RING_INIT(_s) do {					\
+    (_s)->req_prod  = (_s)->rsp_prod  = 0;				\
+    (_s)->req_event = (_s)->rsp_event = 1;				\
+    memset((_s)->pad, 0, sizeof((_s)->pad));				\
+} while(0)
+
+#define FRONT_RING_INIT(_r, _s, __size) do {				\
+    (_r)->req_prod_pvt = 0;						\
+    (_r)->rsp_cons = 0;							\
+    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+    (_r)->sring = (_s);							\
+} while (0)
+
+#define BACK_RING_INIT(_r, _s, __size) do {				\
+    (_r)->rsp_prod_pvt = 0;						\
+    (_r)->req_cons = 0;							\
+    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+    (_r)->sring = (_s);							\
+} while (0)
+
+/* Initialize to existing shared indexes -- for recovery */
+#define FRONT_RING_ATTACH(_r, _s, __size) do {				\
+    (_r)->sring = (_s);							\
+    (_r)->req_prod_pvt = (_s)->req_prod;				\
+    (_r)->rsp_cons = (_s)->rsp_prod;					\
+    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+} while (0)
+
+#define BACK_RING_ATTACH(_r, _s, __size) do {				\
+    (_r)->sring = (_s);							\
+    (_r)->rsp_prod_pvt = (_s)->rsp_prod;				\
+    (_r)->req_cons = (_s)->req_prod;					\
+    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+} while (0)
+
+/* How big is this ring? */
+#define RING_SIZE(_r)							\
+    ((_r)->nr_ents)
+
+/* Number of free requests (for use on front side only). */
+#define RING_FREE_REQUESTS(_r)						\
+    (RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
+
+/* Test if there is an empty slot available on the front ring.
+ * (This is only meaningful from the front. )
+ */
+#define RING_FULL(_r)							\
+    (RING_FREE_REQUESTS(_r) == 0)
+
+/* Test if there are outstanding messages to be processed on a ring. */
+#define RING_HAS_UNCONSUMED_RESPONSES(_r)				\
+    ((_r)->sring->rsp_prod - (_r)->rsp_cons)
+
+#define RING_HAS_UNCONSUMED_REQUESTS(_r)				\
+    ({									\
+	unsigned int req = (_r)->sring->req_prod - (_r)->req_cons;	\
+	unsigned int rsp = RING_SIZE(_r) -				\
+			   ((_r)->req_cons - (_r)->rsp_prod_pvt);	\
+	req < rsp ? req : rsp;						\
+    })
+
+/* Direct access to individual ring elements, by index. */
+#define RING_GET_REQUEST(_r, _idx)					\
+    (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
+
+#define RING_GET_RESPONSE(_r, _idx)					\
+    (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+
+/* Loop termination condition: Would the specified index overflow the ring? */
+#define RING_REQUEST_CONS_OVERFLOW(_r, _cons)				\
+    (((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
+
+#define RING_PUSH_REQUESTS(_r) do {					\
+    wmb(); /* back sees requests /before/ updated producer index */	\
+    (_r)->sring->req_prod = (_r)->req_prod_pvt;				\
+} while (0)
+
+#define RING_PUSH_RESPONSES(_r) do {					\
+    wmb(); /* front sees responses /before/ updated producer index */	\
+    (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt;				\
+} while (0)
+
+/*
+ * Notification hold-off (req_event and rsp_event):
+ *
+ * When queueing requests or responses on a shared ring, it may not always be
+ * necessary to notify the remote end. For example, if requests are in flight
+ * in a backend, the front may be able to queue further requests without
+ * notifying the back (if the back checks for new requests when it queues
+ * responses).
+ *
+ * When enqueuing requests or responses:
+ *
+ *  Use RING_PUSH_{REQUESTS,RESPONSES}_AND_CHECK_NOTIFY(). The second argument
+ *  is a boolean return value. True indicates that the receiver requires an
+ *  asynchronous notification.
+ *
+ * After dequeuing requests or responses (before sleeping the connection):
+ *
+ *  Use RING_FINAL_CHECK_FOR_REQUESTS() or RING_FINAL_CHECK_FOR_RESPONSES().
+ *  The second argument is a boolean return value. True indicates that there
+ *  are pending messages on the ring (i.e., the connection should not be put
+ *  to sleep).
+ *
+ *  These macros will set the req_event/rsp_event field to trigger a
+ *  notification on the very next message that is enqueued. If you want to
+ *  create batches of work (i.e., only receive a notification after several
+ *  messages have been enqueued) then you will need to create a customised
+ *  version of the FINAL_CHECK macro in your own code, which sets the event
+ *  field appropriately.
+ */
+
+#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do {		\
+    RING_IDX __old = (_r)->sring->req_prod;				\
+    RING_IDX __new = (_r)->req_prod_pvt;				\
+    wmb(); /* back sees requests /before/ updated producer index */	\
+    (_r)->sring->req_prod = __new;					\
+    mb(); /* back sees new requests /before/ we check req_event */	\
+    (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) <		\
+		 (RING_IDX)(__new - __old));				\
+} while (0)
+
+#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do {		\
+    RING_IDX __old = (_r)->sring->rsp_prod;				\
+    RING_IDX __new = (_r)->rsp_prod_pvt;				\
+    wmb(); /* front sees responses /before/ updated producer index */	\
+    (_r)->sring->rsp_prod = __new;					\
+    mb(); /* front sees new responses /before/ we check rsp_event */	\
+    (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) <		\
+		 (RING_IDX)(__new - __old));				\
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do {		\
+    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);			\
+    if (_work_to_do) break;						\
+    (_r)->sring->req_event = (_r)->req_cons + 1;			\
+    mb();								\
+    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);			\
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do {		\
+    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);			\
+    if (_work_to_do) break;						\
+    (_r)->sring->rsp_event = (_r)->rsp_cons + 1;			\
+    mb();								\
+    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);			\
+} while (0)
+
+#endif /* __XEN_PUBLIC_IO_RING_H__ */
diff --git a/include/xen/interface/io/xenbus.h b/include/xen/interface/io/xenbus.h
new file mode 100644
index 0000000..46508c7
--- /dev/null
+++ b/include/xen/interface/io/xenbus.h
@@ -0,0 +1,44 @@
+/*****************************************************************************
+ * xenbus.h
+ *
+ * Xenbus protocol details.
+ *
+ * Copyright (C) 2005 XenSource Ltd.
+ */
+
+#ifndef _XEN_PUBLIC_IO_XENBUS_H
+#define _XEN_PUBLIC_IO_XENBUS_H
+
+/* The state of either end of the Xenbus, i.e. the current communication
+   status of initialisation across the bus.  States here imply nothing about
+   the state of the connection between the driver and the kernel's device
+   layers.  */
+enum xenbus_state
+{
+	XenbusStateUnknown      = 0,
+	XenbusStateInitialising = 1,
+	XenbusStateInitWait     = 2,  /* Finished early
+					 initialisation, but waiting
+					 for information from the peer
+					 or hotplug scripts. */
+	XenbusStateInitialised  = 3,  /* Initialised and waiting for a
+					 connection from the peer. */
+	XenbusStateConnected    = 4,
+	XenbusStateClosing      = 5,  /* The device is being closed
+					 due to an error or an unplug
+					 event. */
+	XenbusStateClosed       = 6
+
+};
+
+#endif /* _XEN_PUBLIC_IO_XENBUS_H */
+
+/*
+ * Local variables:
+ *  c-file-style: "linux"
+ *  indent-tabs-mode: t
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
diff --git a/include/xen/interface/io/xs_wire.h b/include/xen/interface/io/xs_wire.h
new file mode 100644
index 0000000..99fcffb
--- /dev/null
+++ b/include/xen/interface/io/xs_wire.h
@@ -0,0 +1,87 @@
+/*
+ * Details of the "wire" protocol between Xen Store Daemon and client
+ * library or guest kernel.
+ * Copyright (C) 2005 Rusty Russell IBM Corporation
+ */
+
+#ifndef _XS_WIRE_H
+#define _XS_WIRE_H
+
+enum xsd_sockmsg_type
+{
+    XS_DEBUG,
+    XS_DIRECTORY,
+    XS_READ,
+    XS_GET_PERMS,
+    XS_WATCH,
+    XS_UNWATCH,
+    XS_TRANSACTION_START,
+    XS_TRANSACTION_END,
+    XS_INTRODUCE,
+    XS_RELEASE,
+    XS_GET_DOMAIN_PATH,
+    XS_WRITE,
+    XS_MKDIR,
+    XS_RM,
+    XS_SET_PERMS,
+    XS_WATCH_EVENT,
+    XS_ERROR,
+    XS_IS_DOMAIN_INTRODUCED
+};
+
+#define XS_WRITE_NONE "NONE"
+#define XS_WRITE_CREATE "CREATE"
+#define XS_WRITE_CREATE_EXCL "CREATE|EXCL"
+
+/* We hand errors as strings, for portability. */
+struct xsd_errors
+{
+    int errnum;
+    const char *errstring;
+};
+#define XSD_ERROR(x) { x, #x }
+static struct xsd_errors xsd_errors[] __attribute__((unused)) = {
+    XSD_ERROR(EINVAL),
+    XSD_ERROR(EACCES),
+    XSD_ERROR(EEXIST),
+    XSD_ERROR(EISDIR),
+    XSD_ERROR(ENOENT),
+    XSD_ERROR(ENOMEM),
+    XSD_ERROR(ENOSPC),
+    XSD_ERROR(EIO),
+    XSD_ERROR(ENOTEMPTY),
+    XSD_ERROR(ENOSYS),
+    XSD_ERROR(EROFS),
+    XSD_ERROR(EBUSY),
+    XSD_ERROR(EAGAIN),
+    XSD_ERROR(EISCONN)
+};
+
+struct xsd_sockmsg
+{
+    uint32_t type;  /* XS_??? */
+    uint32_t req_id;/* Request identifier, echoed in daemon's response.  */
+    uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */
+    uint32_t len;   /* Length of data following this. */
+
+    /* Generally followed by nul-terminated string(s). */
+};
+
+enum xs_watch_type
+{
+    XS_WATCH_PATH = 0,
+    XS_WATCH_TOKEN
+};
+
+/* Inter-domain shared memory communications. */
+#define XENSTORE_RING_SIZE 1024
+typedef uint32_t XENSTORE_RING_IDX;
+#define MASK_XENSTORE_IDX(idx) ((idx) & (XENSTORE_RING_SIZE-1))
+struct xenstore_domain_interface {
+    char req[XENSTORE_RING_SIZE]; /* Requests to xenstore daemon. */
+    char rsp[XENSTORE_RING_SIZE]; /* Replies and async watch events. */
+    XENSTORE_RING_IDX req_cons, req_prod;
+    XENSTORE_RING_IDX rsp_cons, rsp_prod;
+};
+
+#endif /* _XS_WIRE_H */
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
new file mode 100644
index 0000000..af36ead
--- /dev/null
+++ b/include/xen/interface/memory.h
@@ -0,0 +1,145 @@
+/******************************************************************************
+ * memory.h
+ *
+ * Memory reservation and information.
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_MEMORY_H__
+#define __XEN_PUBLIC_MEMORY_H__
+
+/*
+ * Increase or decrease the specified domain's memory reservation. Returns a
+ * -ve errcode on failure, or the # extents successfully allocated or freed.
+ * arg == addr of struct xen_memory_reservation.
+ */
+#define XENMEM_increase_reservation 0
+#define XENMEM_decrease_reservation 1
+#define XENMEM_populate_physmap     6
+struct xen_memory_reservation {
+
+    /*
+     * XENMEM_increase_reservation:
+     *   OUT: MFN (*not* GMFN) bases of extents that were allocated
+     * XENMEM_decrease_reservation:
+     *   IN:  GMFN bases of extents to free
+     * XENMEM_populate_physmap:
+     *   IN:  GPFN bases of extents to populate with memory
+     *   OUT: GMFN bases of extents that were allocated
+     *   (NB. This command also updates the mach_to_phys translation table)
+     */
+    GUEST_HANDLE(ulong) extent_start;
+
+    /* Number of extents, and size/alignment of each (2^extent_order pages). */
+    unsigned long  nr_extents;
+    unsigned int   extent_order;
+
+    /*
+     * Maximum # bits addressable by the user of the allocated region (e.g.,
+     * I/O devices often have a 32-bit limitation even in 64-bit systems). If
+     * zero then the user has no addressing restriction.
+     * This field is not used by XENMEM_decrease_reservation.
+     */
+    unsigned int   address_bits;
+
+    /*
+     * Domain whose reservation is being changed.
+     * Unprivileged domains can specify only DOMID_SELF.
+     */
+    domid_t        domid;
+
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation);
+
+/*
+ * Returns the maximum machine frame number of mapped RAM in this system.
+ * This command always succeeds (it never returns an error code).
+ * arg == NULL.
+ */
+#define XENMEM_maximum_ram_page     2
+
+/*
+ * Returns the current or maximum memory reservation, in pages, of the
+ * specified domain (may be DOMID_SELF). Returns -ve errcode on failure.
+ * arg == addr of domid_t.
+ */
+#define XENMEM_current_reservation  3
+#define XENMEM_maximum_reservation  4
+
+/*
+ * Returns a list of MFN bases of 2MB extents comprising the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table do not implement
+ * this command.
+ * arg == addr of xen_machphys_mfn_list_t.
+ */
+#define XENMEM_machphys_mfn_list    5
+struct xen_machphys_mfn_list {
+    /*
+     * Size of the 'extent_start' array. Fewer entries will be filled if the
+     * machphys table is smaller than max_extents * 2MB.
+     */
+    unsigned int max_extents;
+
+    /*
+     * Pointer to buffer to fill with list of extent starts. If there are
+     * any large discontiguities in the machine address space, 2MB gaps in
+     * the machphys table will be represented by an MFN base of zero.
+     */
+    GUEST_HANDLE(ulong) extent_start;
+
+    /*
+     * Number of extents written to the above array. This will be smaller
+     * than 'max_extents' if the machphys table is smaller than max_e * 2MB.
+     */
+    unsigned int nr_extents;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
+
+/*
+ * Sets the GPFN at which a particular page appears in the specified guest's
+ * pseudophysical address space.
+ * arg == addr of xen_add_to_physmap_t.
+ */
+#define XENMEM_add_to_physmap      7
+struct xen_add_to_physmap {
+    /* Which domain to change the mapping for. */
+    domid_t domid;
+
+    /* Source mapping space. */
+#define XENMAPSPACE_shared_info 0 /* shared info page */
+#define XENMAPSPACE_grant_table 1 /* grant table page */
+    unsigned int space;
+
+    /* Index into source mapping space. */
+    unsigned long idx;
+
+    /* GPFN where the source mapping page should appear. */
+    unsigned long gpfn;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
+
+/*
+ * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error
+ * code on failure. This call only works for auto-translated guests.
+ */
+#define XENMEM_translate_gpfn_list  8
+struct xen_translate_gpfn_list {
+    /* Which domain to translate for? */
+    domid_t domid;
+
+    /* Length of list. */
+    unsigned long nr_gpfns;
+
+    /* List of GPFNs to translate. */
+    GUEST_HANDLE(ulong) gpfn_list;
+
+    /*
+     * Output list to contain MFN translations. May be the same as the input
+     * list (in which case each input GPFN is overwritten with the output MFN).
+     */
+    GUEST_HANDLE(ulong) mfn_list;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list);
+
+#endif /* __XEN_PUBLIC_MEMORY_H__ */
diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
new file mode 100644
index 0000000..cd69391
--- /dev/null
+++ b/include/xen/interface/physdev.h
@@ -0,0 +1,145 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __XEN_PUBLIC_PHYSDEV_H__
+#define __XEN_PUBLIC_PHYSDEV_H__
+
+/*
+ * Prototype for this hypercall is:
+ *  int physdev_op(int cmd, void *args)
+ * @cmd	 == PHYSDEVOP_??? (physdev operation).
+ * @args == Operation-specific extra arguments (NULL if none).
+ */
+
+/*
+ * Notify end-of-interrupt (EOI) for the specified IRQ.
+ * @arg == pointer to physdev_eoi structure.
+ */
+#define PHYSDEVOP_eoi			12
+struct physdev_eoi {
+	/* IN */
+	uint32_t irq;
+};
+
+/*
+ * Query the status of an IRQ line.
+ * @arg == pointer to physdev_irq_status_query structure.
+ */
+#define PHYSDEVOP_irq_status_query	 5
+struct physdev_irq_status_query {
+	/* IN */
+	uint32_t irq;
+	/* OUT */
+	uint32_t flags; /* XENIRQSTAT_* */
+};
+
+/* Need to call PHYSDEVOP_eoi when the IRQ has been serviced? */
+#define _XENIRQSTAT_needs_eoi	(0)
+#define	 XENIRQSTAT_needs_eoi	(1U<<_XENIRQSTAT_needs_eoi)
+
+/* IRQ shared by multiple guests? */
+#define _XENIRQSTAT_shared	(1)
+#define	 XENIRQSTAT_shared	(1U<<_XENIRQSTAT_shared)
+
+/*
+ * Set the current VCPU's I/O privilege level.
+ * @arg == pointer to physdev_set_iopl structure.
+ */
+#define PHYSDEVOP_set_iopl		 6
+struct physdev_set_iopl {
+	/* IN */
+	uint32_t iopl;
+};
+
+/*
+ * Set the current VCPU's I/O-port permissions bitmap.
+ * @arg == pointer to physdev_set_iobitmap structure.
+ */
+#define PHYSDEVOP_set_iobitmap		 7
+struct physdev_set_iobitmap {
+	/* IN */
+	uint8_t * bitmap;
+	uint32_t nr_ports;
+};
+
+/*
+ * Read or write an IO-APIC register.
+ * @arg == pointer to physdev_apic structure.
+ */
+#define PHYSDEVOP_apic_read		 8
+#define PHYSDEVOP_apic_write		 9
+struct physdev_apic {
+	/* IN */
+	unsigned long apic_physbase;
+	uint32_t reg;
+	/* IN or OUT */
+	uint32_t value;
+};
+
+/*
+ * Allocate or free a physical upcall vector for the specified IRQ line.
+ * @arg == pointer to physdev_irq structure.
+ */
+#define PHYSDEVOP_alloc_irq_vector	10
+#define PHYSDEVOP_free_irq_vector	11
+struct physdev_irq {
+	/* IN */
+	uint32_t irq;
+	/* IN or OUT */
+	uint32_t vector;
+};
+
+/*
+ * Argument to physdev_op_compat() hypercall. Superceded by new physdev_op()
+ * hypercall since 0x00030202.
+ */
+struct physdev_op {
+	uint32_t cmd;
+	union {
+		struct physdev_irq_status_query	     irq_status_query;
+		struct physdev_set_iopl		     set_iopl;
+		struct physdev_set_iobitmap	     set_iobitmap;
+		struct physdev_apic		     apic_op;
+		struct physdev_irq		     irq_op;
+	} u;
+};
+
+/*
+ * Notify that some PIRQ-bound event channels have been unmasked.
+ * ** This command is obsolete since interface version 0x00030202 and is **
+ * ** unsupported by newer versions of Xen.				 **
+ */
+#define PHYSDEVOP_IRQ_UNMASK_NOTIFY	 4
+
+/*
+ * These all-capitals physdev operation names are superceded by the new names
+ * (defined above) since interface version 0x00030202.
+ */
+#define PHYSDEVOP_IRQ_STATUS_QUERY	 PHYSDEVOP_irq_status_query
+#define PHYSDEVOP_SET_IOPL		 PHYSDEVOP_set_iopl
+#define PHYSDEVOP_SET_IOBITMAP		 PHYSDEVOP_set_iobitmap
+#define PHYSDEVOP_APIC_READ		 PHYSDEVOP_apic_read
+#define PHYSDEVOP_APIC_WRITE		 PHYSDEVOP_apic_write
+#define PHYSDEVOP_ASSIGN_VECTOR		 PHYSDEVOP_alloc_irq_vector
+#define PHYSDEVOP_FREE_VECTOR		 PHYSDEVOP_free_irq_vector
+#define PHYSDEVOP_IRQ_NEEDS_UNMASK_NOTIFY XENIRQSTAT_needs_eoi
+#define PHYSDEVOP_IRQ_SHARED		 XENIRQSTAT_shared
+
+#endif /* __XEN_PUBLIC_PHYSDEV_H__ */
diff --git a/include/xen/interface/sched.h b/include/xen/interface/sched.h
new file mode 100644
index 0000000..5fec575
--- /dev/null
+++ b/include/xen/interface/sched.h
@@ -0,0 +1,77 @@
+/******************************************************************************
+ * sched.h
+ *
+ * Scheduler state interactions
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_SCHED_H__
+#define __XEN_PUBLIC_SCHED_H__
+
+#include "event_channel.h"
+
+/*
+ * The prototype for this hypercall is:
+ *  long sched_op_new(int cmd, void *arg)
+ * @cmd == SCHEDOP_??? (scheduler operation).
+ * @arg == Operation-specific extra argument(s), as described below.
+ *
+ * **NOTE**:
+ * Versions of Xen prior to 3.0.2 provide only the following legacy version
+ * of this hypercall, supporting only the commands yield, block and shutdown:
+ *  long sched_op(int cmd, unsigned long arg)
+ * @cmd == SCHEDOP_??? (scheduler operation).
+ * @arg == 0               (SCHEDOP_yield and SCHEDOP_block)
+ *      == SHUTDOWN_* code (SCHEDOP_shutdown)
+ */
+
+/*
+ * Voluntarily yield the CPU.
+ * @arg == NULL.
+ */
+#define SCHEDOP_yield       0
+
+/*
+ * Block execution of this VCPU until an event is received for processing.
+ * If called with event upcalls masked, this operation will atomically
+ * reenable event delivery and check for pending events before blocking the
+ * VCPU. This avoids a "wakeup waiting" race.
+ * @arg == NULL.
+ */
+#define SCHEDOP_block       1
+
+/*
+ * Halt execution of this domain (all VCPUs) and notify the system controller.
+ * @arg == pointer to sched_shutdown structure.
+ */
+#define SCHEDOP_shutdown    2
+struct sched_shutdown {
+    unsigned int reason; /* SHUTDOWN_* */
+};
+DEFINE_GUEST_HANDLE_STRUCT(sched_shutdown);
+
+/*
+ * Poll a set of event-channel ports. Return when one or more are pending. An
+ * optional timeout may be specified.
+ * @arg == pointer to sched_poll structure.
+ */
+#define SCHEDOP_poll        3
+struct sched_poll {
+    GUEST_HANDLE(evtchn_port_t) ports;
+    unsigned int nr_ports;
+    uint64_t timeout;
+};
+DEFINE_GUEST_HANDLE_STRUCT(sched_poll);
+
+/*
+ * Reason codes for SCHEDOP_shutdown. These may be interpreted by control
+ * software to determine the appropriate action. For the most part, Xen does
+ * not care about the shutdown code.
+ */
+#define SHUTDOWN_poweroff   0  /* Domain exited normally. Clean up and kill. */
+#define SHUTDOWN_reboot     1  /* Clean up, kill, and then restart.          */
+#define SHUTDOWN_suspend    2  /* Clean up, save suspend info, kill.         */
+#define SHUTDOWN_crash      3  /* Tell controller we've crashed.             */
+
+#endif /* __XEN_PUBLIC_SCHED_H__ */
diff --git a/include/xen/interface/vcpu.h b/include/xen/interface/vcpu.h
new file mode 100644
index 0000000..ff61ea3
--- /dev/null
+++ b/include/xen/interface/vcpu.h
@@ -0,0 +1,167 @@
+/******************************************************************************
+ * vcpu.h
+ *
+ * VCPU initialisation, query, and hotplug.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_VCPU_H__
+#define __XEN_PUBLIC_VCPU_H__
+
+/*
+ * Prototype for this hypercall is:
+ *	int vcpu_op(int cmd, int vcpuid, void *extra_args)
+ * @cmd		   == VCPUOP_??? (VCPU operation).
+ * @vcpuid	   == VCPU to operate on.
+ * @extra_args == Operation-specific extra arguments (NULL if none).
+ */
+
+/*
+ * Initialise a VCPU. Each VCPU can be initialised only once. A
+ * newly-initialised VCPU will not run until it is brought up by VCPUOP_up.
+ *
+ * @extra_arg == pointer to vcpu_guest_context structure containing initial
+ *				 state for the VCPU.
+ */
+#define VCPUOP_initialise			 0
+
+/*
+ * Bring up a VCPU. This makes the VCPU runnable. This operation will fail
+ * if the VCPU has not been initialised (VCPUOP_initialise).
+ */
+#define VCPUOP_up					 1
+
+/*
+ * Bring down a VCPU (i.e., make it non-runnable).
+ * There are a few caveats that callers should observe:
+ *	1. This operation may return, and VCPU_is_up may return false, before the
+ *	   VCPU stops running (i.e., the command is asynchronous). It is a good
+ *	   idea to ensure that the VCPU has entered a non-critical loop before
+ *	   bringing it down. Alternatively, this operation is guaranteed
+ *	   synchronous if invoked by the VCPU itself.
+ *	2. After a VCPU is initialised, there is currently no way to drop all its
+ *	   references to domain memory. Even a VCPU that is down still holds
+ *	   memory references via its pagetable base pointer and GDT. It is good
+ *	   practise to move a VCPU onto an 'idle' or default page table, LDT and
+ *	   GDT before bringing it down.
+ */
+#define VCPUOP_down					 2
+
+/* Returns 1 if the given VCPU is up. */
+#define VCPUOP_is_up				 3
+
+/*
+ * Return information about the state and running time of a VCPU.
+ * @extra_arg == pointer to vcpu_runstate_info structure.
+ */
+#define VCPUOP_get_runstate_info	 4
+struct vcpu_runstate_info {
+		/* VCPU's current state (RUNSTATE_*). */
+		int		 state;
+		/* When was current state entered (system time, ns)? */
+		uint64_t state_entry_time;
+		/*
+		 * Time spent in each RUNSTATE_* (ns). The sum of these times is
+		 * guaranteed not to drift from system time.
+		 */
+		uint64_t time[4];
+};
+
+/* VCPU is currently running on a physical CPU. */
+#define RUNSTATE_running  0
+
+/* VCPU is runnable, but not currently scheduled on any physical CPU. */
+#define RUNSTATE_runnable 1
+
+/* VCPU is blocked (a.k.a. idle). It is therefore not runnable. */
+#define RUNSTATE_blocked  2
+
+/*
+ * VCPU is not runnable, but it is not blocked.
+ * This is a 'catch all' state for things like hotplug and pauses by the
+ * system administrator (or for critical sections in the hypervisor).
+ * RUNSTATE_blocked dominates this state (it is the preferred state).
+ */
+#define RUNSTATE_offline  3
+
+/*
+ * Register a shared memory area from which the guest may obtain its own
+ * runstate information without needing to execute a hypercall.
+ * Notes:
+ *	1. The registered address may be virtual or physical, depending on the
+ *	   platform. The virtual address should be registered on x86 systems.
+ *	2. Only one shared area may be registered per VCPU. The shared area is
+ *	   updated by the hypervisor each time the VCPU is scheduled. Thus
+ *	   runstate.state will always be RUNSTATE_running and
+ *	   runstate.state_entry_time will indicate the system time at which the
+ *	   VCPU was last scheduled to run.
+ * @extra_arg == pointer to vcpu_register_runstate_memory_area structure.
+ */
+#define VCPUOP_register_runstate_memory_area 5
+struct vcpu_register_runstate_memory_area {
+		union {
+				struct vcpu_runstate_info *v;
+				uint64_t p;
+		} addr;
+};
+
+/*
+ * Set or stop a VCPU's periodic timer. Every VCPU has one periodic timer
+ * which can be set via these commands. Periods smaller than one millisecond
+ * may not be supported.
+ */
+#define VCPUOP_set_periodic_timer	 6 /* arg == vcpu_set_periodic_timer_t */
+#define VCPUOP_stop_periodic_timer	 7 /* arg == NULL */
+struct vcpu_set_periodic_timer {
+		uint64_t period_ns;
+};
+
+/*
+ * Set or stop a VCPU's single-shot timer. Every VCPU has one single-shot
+ * timer which can be set via these commands.
+ */
+#define VCPUOP_set_singleshot_timer	 8 /* arg == vcpu_set_singleshot_timer_t */
+#define VCPUOP_stop_singleshot_timer 9 /* arg == NULL */
+struct vcpu_set_singleshot_timer {
+		uint64_t timeout_abs_ns;
+		uint32_t flags;			   /* VCPU_SSHOTTMR_??? */
+};
+
+/* Flags to VCPUOP_set_singleshot_timer. */
+ /* Require the timeout to be in the future (return -ETIME if it's passed). */
+#define _VCPU_SSHOTTMR_future (0)
+#define VCPU_SSHOTTMR_future  (1U << _VCPU_SSHOTTMR_future)
+
+/*
+ * Register a memory location in the guest address space for the
+ * vcpu_info structure.  This allows the guest to place the vcpu_info
+ * structure in a convenient place, such as in a per-cpu data area.
+ * The pointer need not be page aligned, but the structure must not
+ * cross a page boundary.
+ */
+#define VCPUOP_register_vcpu_info   10  /* arg == struct vcpu_info */
+struct vcpu_register_vcpu_info {
+    uint32_t mfn;               /* mfn of page to place vcpu_info */
+    uint32_t offset;            /* offset within page */
+};
+
+#endif /* __XEN_PUBLIC_VCPU_H__ */
diff --git a/include/xen/interface/version.h b/include/xen/interface/version.h
new file mode 100644
index 0000000..453235e
--- /dev/null
+++ b/include/xen/interface/version.h
@@ -0,0 +1,60 @@
+/******************************************************************************
+ * version.h
+ *
+ * Xen version, type, and compile information.
+ *
+ * Copyright (c) 2005, Nguyen Anh Quynh <aquynh@gmail.com>
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_VERSION_H__
+#define __XEN_PUBLIC_VERSION_H__
+
+/* NB. All ops return zero on success, except XENVER_version. */
+
+/* arg == NULL; returns major:minor (16:16). */
+#define XENVER_version      0
+
+/* arg == xen_extraversion_t. */
+#define XENVER_extraversion 1
+struct xen_extraversion {
+    char extraversion[16];
+};
+#define XEN_EXTRAVERSION_LEN (sizeof(struct xen_extraversion))
+
+/* arg == xen_compile_info_t. */
+#define XENVER_compile_info 2
+struct xen_compile_info {
+    char compiler[64];
+    char compile_by[16];
+    char compile_domain[32];
+    char compile_date[32];
+};
+
+#define XENVER_capabilities 3
+struct xen_capabilities_info {
+    char info[1024];
+};
+#define XEN_CAPABILITIES_INFO_LEN (sizeof(struct xen_capabilities_info))
+
+#define XENVER_changeset 4
+struct xen_changeset_info {
+    char info[64];
+};
+#define XEN_CHANGESET_INFO_LEN (sizeof(struct xen_changeset_info))
+
+#define XENVER_platform_parameters 5
+struct xen_platform_parameters {
+    unsigned long virt_start;
+};
+
+#define XENVER_get_features 6
+struct xen_feature_info {
+    unsigned int submap_idx;    /* IN: which 32-bit submap to return */
+    uint32_t     submap;        /* OUT: 32-bit submap */
+};
+
+/* Declares the features reported by XENVER_get_features. */
+#include "features.h"
+
+#endif /* __XEN_PUBLIC_VERSION_H__ */
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
new file mode 100644
index 0000000..518a5bf
--- /dev/null
+++ b/include/xen/interface/xen.h
@@ -0,0 +1,447 @@
+/******************************************************************************
+ * xen.h
+ *
+ * Guest OS interface to Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __XEN_PUBLIC_XEN_H__
+#define __XEN_PUBLIC_XEN_H__
+
+#include <asm/xen/interface.h>
+
+/*
+ * XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS).
+ */
+
+/*
+ * x86_32: EAX = vector; EBX, ECX, EDX, ESI, EDI = args 1, 2, 3, 4, 5.
+ *         EAX = return value
+ *         (argument registers may be clobbered on return)
+ * x86_64: RAX = vector; RDI, RSI, RDX, R10, R8, R9 = args 1, 2, 3, 4, 5, 6.
+ *         RAX = return value
+ *         (argument registers not clobbered on return; RCX, R11 are)
+ */
+#define __HYPERVISOR_set_trap_table        0
+#define __HYPERVISOR_mmu_update            1
+#define __HYPERVISOR_set_gdt               2
+#define __HYPERVISOR_stack_switch          3
+#define __HYPERVISOR_set_callbacks         4
+#define __HYPERVISOR_fpu_taskswitch        5
+#define __HYPERVISOR_sched_op              6
+#define __HYPERVISOR_dom0_op               7
+#define __HYPERVISOR_set_debugreg          8
+#define __HYPERVISOR_get_debugreg          9
+#define __HYPERVISOR_update_descriptor    10
+#define __HYPERVISOR_memory_op            12
+#define __HYPERVISOR_multicall            13
+#define __HYPERVISOR_update_va_mapping    14
+#define __HYPERVISOR_set_timer_op         15
+#define __HYPERVISOR_event_channel_op_compat 16
+#define __HYPERVISOR_xen_version          17
+#define __HYPERVISOR_console_io           18
+#define __HYPERVISOR_physdev_op_compat    19
+#define __HYPERVISOR_grant_table_op       20
+#define __HYPERVISOR_vm_assist            21
+#define __HYPERVISOR_update_va_mapping_otherdomain 22
+#define __HYPERVISOR_iret                 23 /* x86 only */
+#define __HYPERVISOR_vcpu_op              24
+#define __HYPERVISOR_set_segment_base     25 /* x86/64 only */
+#define __HYPERVISOR_mmuext_op            26
+#define __HYPERVISOR_acm_op               27
+#define __HYPERVISOR_nmi_op               28
+#define __HYPERVISOR_sched_op_new         29
+#define __HYPERVISOR_callback_op          30
+#define __HYPERVISOR_xenoprof_op          31
+#define __HYPERVISOR_event_channel_op     32
+#define __HYPERVISOR_physdev_op           33
+#define __HYPERVISOR_hvm_op               34
+
+/*
+ * VIRTUAL INTERRUPTS
+ *
+ * Virtual interrupts that a guest OS may receive from Xen.
+ */
+#define VIRQ_TIMER      0  /* Timebase update, and/or requested timeout.  */
+#define VIRQ_DEBUG      1  /* Request guest to dump debug info.           */
+#define VIRQ_CONSOLE    2  /* (DOM0) Bytes received on emergency console. */
+#define VIRQ_DOM_EXC    3  /* (DOM0) Exceptional event for some domain.   */
+#define VIRQ_DEBUGGER   6  /* (DOM0) A domain has paused for debugging.   */
+#define NR_VIRQS        8
+
+/*
+ * MMU-UPDATE REQUESTS
+ *
+ * HYPERVISOR_mmu_update() accepts a list of (ptr, val) pairs.
+ * A foreigndom (FD) can be specified (or DOMID_SELF for none).
+ * Where the FD has some effect, it is described below.
+ * ptr[1:0] specifies the appropriate MMU_* command.
+ *
+ * ptr[1:0] == MMU_NORMAL_PT_UPDATE:
+ * Updates an entry in a page table. If updating an L1 table, and the new
+ * table entry is valid/present, the mapped frame must belong to the FD, if
+ * an FD has been specified. If attempting to map an I/O page then the
+ * caller assumes the privilege of the FD.
+ * FD == DOMID_IO: Permit /only/ I/O mappings, at the priv level of the caller.
+ * FD == DOMID_XEN: Map restricted areas of Xen's heap space.
+ * ptr[:2]  -- Machine address of the page-table entry to modify.
+ * val      -- Value to write.
+ *
+ * ptr[1:0] == MMU_MACHPHYS_UPDATE:
+ * Updates an entry in the machine->pseudo-physical mapping table.
+ * ptr[:2]  -- Machine address within the frame whose mapping to modify.
+ *             The frame must belong to the FD, if one is specified.
+ * val      -- Value to write into the mapping entry.
+ */
+#define MMU_NORMAL_PT_UPDATE     0 /* checked '*ptr = val'. ptr is MA.       */
+#define MMU_MACHPHYS_UPDATE      1 /* ptr = MA of frame to modify entry for  */
+
+/*
+ * MMU EXTENDED OPERATIONS
+ *
+ * HYPERVISOR_mmuext_op() accepts a list of mmuext_op structures.
+ * A foreigndom (FD) can be specified (or DOMID_SELF for none).
+ * Where the FD has some effect, it is described below.
+ *
+ * cmd: MMUEXT_(UN)PIN_*_TABLE
+ * mfn: Machine frame number to be (un)pinned as a p.t. page.
+ *      The frame must belong to the FD, if one is specified.
+ *
+ * cmd: MMUEXT_NEW_BASEPTR
+ * mfn: Machine frame number of new page-table base to install in MMU.
+ *
+ * cmd: MMUEXT_NEW_USER_BASEPTR [x86/64 only]
+ * mfn: Machine frame number of new page-table base to install in MMU
+ *      when in user space.
+ *
+ * cmd: MMUEXT_TLB_FLUSH_LOCAL
+ * No additional arguments. Flushes local TLB.
+ *
+ * cmd: MMUEXT_INVLPG_LOCAL
+ * linear_addr: Linear address to be flushed from the local TLB.
+ *
+ * cmd: MMUEXT_TLB_FLUSH_MULTI
+ * vcpumask: Pointer to bitmap of VCPUs to be flushed.
+ *
+ * cmd: MMUEXT_INVLPG_MULTI
+ * linear_addr: Linear address to be flushed.
+ * vcpumask: Pointer to bitmap of VCPUs to be flushed.
+ *
+ * cmd: MMUEXT_TLB_FLUSH_ALL
+ * No additional arguments. Flushes all VCPUs' TLBs.
+ *
+ * cmd: MMUEXT_INVLPG_ALL
+ * linear_addr: Linear address to be flushed from all VCPUs' TLBs.
+ *
+ * cmd: MMUEXT_FLUSH_CACHE
+ * No additional arguments. Writes back and flushes cache contents.
+ *
+ * cmd: MMUEXT_SET_LDT
+ * linear_addr: Linear address of LDT base (NB. must be page-aligned).
+ * nr_ents: Number of entries in LDT.
+ */
+#define MMUEXT_PIN_L1_TABLE      0
+#define MMUEXT_PIN_L2_TABLE      1
+#define MMUEXT_PIN_L3_TABLE      2
+#define MMUEXT_PIN_L4_TABLE      3
+#define MMUEXT_UNPIN_TABLE       4
+#define MMUEXT_NEW_BASEPTR       5
+#define MMUEXT_TLB_FLUSH_LOCAL   6
+#define MMUEXT_INVLPG_LOCAL      7
+#define MMUEXT_TLB_FLUSH_MULTI   8
+#define MMUEXT_INVLPG_MULTI      9
+#define MMUEXT_TLB_FLUSH_ALL    10
+#define MMUEXT_INVLPG_ALL       11
+#define MMUEXT_FLUSH_CACHE      12
+#define MMUEXT_SET_LDT          13
+#define MMUEXT_NEW_USER_BASEPTR 15
+
+#ifndef __ASSEMBLY__
+struct mmuext_op {
+	unsigned int cmd;
+	union {
+		/* [UN]PIN_TABLE, NEW_BASEPTR, NEW_USER_BASEPTR */
+		unsigned long mfn;
+		/* INVLPG_LOCAL, INVLPG_ALL, SET_LDT */
+		unsigned long linear_addr;
+	} arg1;
+	union {
+		/* SET_LDT */
+		unsigned int nr_ents;
+		/* TLB_FLUSH_MULTI, INVLPG_MULTI */
+		void *vcpumask;
+	} arg2;
+};
+DEFINE_GUEST_HANDLE_STRUCT(mmuext_op);
+#endif
+
+/* These are passed as 'flags' to update_va_mapping. They can be ORed. */
+/* When specifying UVMF_MULTI, also OR in a pointer to a CPU bitmap.   */
+/* UVMF_LOCAL is merely UVMF_MULTI with a NULL bitmap pointer.         */
+#define UVMF_NONE               (0UL<<0) /* No flushing at all.   */
+#define UVMF_TLB_FLUSH          (1UL<<0) /* Flush entire TLB(s).  */
+#define UVMF_INVLPG             (2UL<<0) /* Flush only one entry. */
+#define UVMF_FLUSHTYPE_MASK     (3UL<<0)
+#define UVMF_MULTI              (0UL<<2) /* Flush subset of TLBs. */
+#define UVMF_LOCAL              (0UL<<2) /* Flush local TLB.      */
+#define UVMF_ALL                (1UL<<2) /* Flush all TLBs.       */
+
+/*
+ * Commands to HYPERVISOR_console_io().
+ */
+#define CONSOLEIO_write         0
+#define CONSOLEIO_read          1
+
+/*
+ * Commands to HYPERVISOR_vm_assist().
+ */
+#define VMASST_CMD_enable                0
+#define VMASST_CMD_disable               1
+#define VMASST_TYPE_4gb_segments         0
+#define VMASST_TYPE_4gb_segments_notify  1
+#define VMASST_TYPE_writable_pagetables  2
+#define VMASST_TYPE_pae_extended_cr3     3
+#define MAX_VMASST_TYPE 3
+
+#ifndef __ASSEMBLY__
+
+typedef uint16_t domid_t;
+
+/* Domain ids >= DOMID_FIRST_RESERVED cannot be used for ordinary domains. */
+#define DOMID_FIRST_RESERVED (0x7FF0U)
+
+/* DOMID_SELF is used in certain contexts to refer to oneself. */
+#define DOMID_SELF (0x7FF0U)
+
+/*
+ * DOMID_IO is used to restrict page-table updates to mapping I/O memory.
+ * Although no Foreign Domain need be specified to map I/O pages, DOMID_IO
+ * is useful to ensure that no mappings to the OS's own heap are accidentally
+ * installed. (e.g., in Linux this could cause havoc as reference counts
+ * aren't adjusted on the I/O-mapping code path).
+ * This only makes sense in MMUEXT_SET_FOREIGNDOM, but in that context can
+ * be specified by any calling domain.
+ */
+#define DOMID_IO   (0x7FF1U)
+
+/*
+ * DOMID_XEN is used to allow privileged domains to map restricted parts of
+ * Xen's heap space (e.g., the machine_to_phys table).
+ * This only makes sense in MMUEXT_SET_FOREIGNDOM, and is only permitted if
+ * the caller is privileged.
+ */
+#define DOMID_XEN  (0x7FF2U)
+
+/*
+ * Send an array of these to HYPERVISOR_mmu_update().
+ * NB. The fields are natural pointer/address size for this architecture.
+ */
+struct mmu_update {
+    uint64_t ptr;       /* Machine address of PTE. */
+    uint64_t val;       /* New contents of PTE.    */
+};
+DEFINE_GUEST_HANDLE_STRUCT(mmu_update);
+
+/*
+ * Send an array of these to HYPERVISOR_multicall().
+ * NB. The fields are natural register size for this architecture.
+ */
+struct multicall_entry {
+    unsigned long op;
+    long result;
+    unsigned long args[6];
+};
+DEFINE_GUEST_HANDLE_STRUCT(multicall_entry);
+
+/*
+ * Event channel endpoints per domain:
+ *  1024 if a long is 32 bits; 4096 if a long is 64 bits.
+ */
+#define NR_EVENT_CHANNELS (sizeof(unsigned long) * sizeof(unsigned long) * 64)
+
+struct vcpu_time_info {
+	/*
+	 * Updates to the following values are preceded and followed
+	 * by an increment of 'version'. The guest can therefore
+	 * detect updates by looking for changes to 'version'. If the
+	 * least-significant bit of the version number is set then an
+	 * update is in progress and the guest must wait to read a
+	 * consistent set of values.  The correct way to interact with
+	 * the version number is similar to Linux's seqlock: see the
+	 * implementations of read_seqbegin/read_seqretry.
+	 */
+	uint32_t version;
+	uint32_t pad0;
+	uint64_t tsc_timestamp;   /* TSC at last update of time vals.  */
+	uint64_t system_time;     /* Time, in nanosecs, since boot.    */
+	/*
+	 * Current system time:
+	 *   system_time + ((tsc - tsc_timestamp) << tsc_shift) * tsc_to_system_mul
+	 * CPU frequency (Hz):
+	 *   ((10^9 << 32) / tsc_to_system_mul) >> tsc_shift
+	 */
+	uint32_t tsc_to_system_mul;
+	int8_t   tsc_shift;
+	int8_t   pad1[3];
+}; /* 32 bytes */
+
+struct vcpu_info {
+	/*
+	 * 'evtchn_upcall_pending' is written non-zero by Xen to indicate
+	 * a pending notification for a particular VCPU. It is then cleared
+	 * by the guest OS /before/ checking for pending work, thus avoiding
+	 * a set-and-check race. Note that the mask is only accessed by Xen
+	 * on the CPU that is currently hosting the VCPU. This means that the
+	 * pending and mask flags can be updated by the guest without special
+	 * synchronisation (i.e., no need for the x86 LOCK prefix).
+	 * This may seem suboptimal because if the pending flag is set by
+	 * a different CPU then an IPI may be scheduled even when the mask
+	 * is set. However, note:
+	 *  1. The task of 'interrupt holdoff' is covered by the per-event-
+	 *     channel mask bits. A 'noisy' event that is continually being
+	 *     triggered can be masked at source at this very precise
+	 *     granularity.
+	 *  2. The main purpose of the per-VCPU mask is therefore to restrict
+	 *     reentrant execution: whether for concurrency control, or to
+	 *     prevent unbounded stack usage. Whatever the purpose, we expect
+	 *     that the mask will be asserted only for short periods at a time,
+	 *     and so the likelihood of a 'spurious' IPI is suitably small.
+	 * The mask is read before making an event upcall to the guest: a
+	 * non-zero mask therefore guarantees that the VCPU will not receive
+	 * an upcall activation. The mask is cleared when the VCPU requests
+	 * to block: this avoids wakeup-waiting races.
+	 */
+	uint8_t evtchn_upcall_pending;
+	uint8_t evtchn_upcall_mask;
+	unsigned long evtchn_pending_sel;
+	struct arch_vcpu_info arch;
+	struct vcpu_time_info time;
+}; /* 64 bytes (x86) */
+
+/*
+ * Xen/kernel shared data -- pointer provided in start_info.
+ * NB. We expect that this struct is smaller than a page.
+ */
+struct shared_info {
+	struct vcpu_info vcpu_info[MAX_VIRT_CPUS];
+
+	/*
+	 * A domain can create "event channels" on which it can send and receive
+	 * asynchronous event notifications. There are three classes of event that
+	 * are delivered by this mechanism:
+	 *  1. Bi-directional inter- and intra-domain connections. Domains must
+	 *     arrange out-of-band to set up a connection (usually by allocating
+	 *     an unbound 'listener' port and avertising that via a storage service
+	 *     such as xenstore).
+	 *  2. Physical interrupts. A domain with suitable hardware-access
+	 *     privileges can bind an event-channel port to a physical interrupt
+	 *     source.
+	 *  3. Virtual interrupts ('events'). A domain can bind an event-channel
+	 *     port to a virtual interrupt source, such as the virtual-timer
+	 *     device or the emergency console.
+	 *
+	 * Event channels are addressed by a "port index". Each channel is
+	 * associated with two bits of information:
+	 *  1. PENDING -- notifies the domain that there is a pending notification
+	 *     to be processed. This bit is cleared by the guest.
+	 *  2. MASK -- if this bit is clear then a 0->1 transition of PENDING
+	 *     will cause an asynchronous upcall to be scheduled. This bit is only
+	 *     updated by the guest. It is read-only within Xen. If a channel
+	 *     becomes pending while the channel is masked then the 'edge' is lost
+	 *     (i.e., when the channel is unmasked, the guest must manually handle
+	 *     pending notifications as no upcall will be scheduled by Xen).
+	 *
+	 * To expedite scanning of pending notifications, any 0->1 pending
+	 * transition on an unmasked channel causes a corresponding bit in a
+	 * per-vcpu selector word to be set. Each bit in the selector covers a
+	 * 'C long' in the PENDING bitfield array.
+	 */
+	unsigned long evtchn_pending[sizeof(unsigned long) * 8];
+	unsigned long evtchn_mask[sizeof(unsigned long) * 8];
+
+	/*
+	 * Wallclock time: updated only by control software. Guests should base
+	 * their gettimeofday() syscall on this wallclock-base value.
+	 */
+	uint32_t wc_version;      /* Version counter: see vcpu_time_info_t. */
+	uint32_t wc_sec;          /* Secs  00:00:00 UTC, Jan 1, 1970.  */
+	uint32_t wc_nsec;         /* Nsecs 00:00:00 UTC, Jan 1, 1970.  */
+
+	struct arch_shared_info arch;
+
+};
+
+/*
+ * Start-of-day memory layout for the initial domain (DOM0):
+ *  1. The domain is started within contiguous virtual-memory region.
+ *  2. The contiguous region begins and ends on an aligned 4MB boundary.
+ *  3. The region start corresponds to the load address of the OS image.
+ *     If the load address is not 4MB aligned then the address is rounded down.
+ *  4. This the order of bootstrap elements in the initial virtual region:
+ *      a. relocated kernel image
+ *      b. initial ram disk              [mod_start, mod_len]
+ *      c. list of allocated page frames [mfn_list, nr_pages]
+ *      d. start_info_t structure        [register ESI (x86)]
+ *      e. bootstrap page tables         [pt_base, CR3 (x86)]
+ *      f. bootstrap stack               [register ESP (x86)]
+ *  5. Bootstrap elements are packed together, but each is 4kB-aligned.
+ *  6. The initial ram disk may be omitted.
+ *  7. The list of page frames forms a contiguous 'pseudo-physical' memory
+ *     layout for the domain. In particular, the bootstrap virtual-memory
+ *     region is a 1:1 mapping to the first section of the pseudo-physical map.
+ *  8. All bootstrap elements are mapped read-writable for the guest OS. The
+ *     only exception is the bootstrap page table, which is mapped read-only.
+ *  9. There is guaranteed to be at least 512kB padding after the final
+ *     bootstrap element. If necessary, the bootstrap virtual region is
+ *     extended by an extra 4MB to ensure this.
+ */
+
+#define MAX_GUEST_CMDLINE 1024
+struct start_info {
+	/* THE FOLLOWING ARE FILLED IN BOTH ON INITIAL BOOT AND ON RESUME.    */
+	char magic[32];             /* "xen-<version>-<platform>".            */
+	unsigned long nr_pages;     /* Total pages allocated to this domain.  */
+	unsigned long shared_info;  /* MACHINE address of shared info struct. */
+	uint32_t flags;             /* SIF_xxx flags.                         */
+	unsigned long store_mfn;    /* MACHINE page number of shared page.    */
+	uint32_t store_evtchn;      /* Event channel for store communication. */
+	union {
+		struct {
+			unsigned long mfn;  /* MACHINE page number of console page.   */
+			uint32_t  evtchn;   /* Event channel for console page.        */
+		} domU;
+		struct {
+			uint32_t info_off;  /* Offset of console_info struct.         */
+			uint32_t info_size; /* Size of console_info struct from start.*/
+		} dom0;
+	} console;
+	/* THE FOLLOWING ARE ONLY FILLED IN ON INITIAL BOOT (NOT RESUME).     */
+	unsigned long pt_base;      /* VIRTUAL address of page directory.     */
+	unsigned long nr_pt_frames; /* Number of bootstrap p.t. frames.       */
+	unsigned long mfn_list;     /* VIRTUAL address of page-frame list.    */
+	unsigned long mod_start;    /* VIRTUAL address of pre-loaded module.  */
+	unsigned long mod_len;      /* Size (bytes) of pre-loaded module.     */
+	int8_t cmd_line[MAX_GUEST_CMDLINE];
+};
+
+/* These flags are passed in the 'flags' field of start_info_t. */
+#define SIF_PRIVILEGED    (1<<0)  /* Is the domain privileged? */
+#define SIF_INITDOMAIN    (1<<1)  /* Is this the initial control domain? */
+
+typedef uint64_t cpumap_t;
+
+typedef uint8_t xen_domain_handle_t[16];
+
+/* Turn a plain number into a C unsigned long constant. */
+#define __mk_unsigned_long(x) x ## UL
+#define mk_unsigned_long(x) __mk_unsigned_long(x)
+
+#else /* __ASSEMBLY__ */
+
+/* In assembly code we cannot use C numeric constant suffixes. */
+#define mk_unsigned_long(x) x
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __XEN_PUBLIC_XEN_H__ */
diff --git a/include/xen/page.h b/include/xen/page.h
new file mode 100644
index 0000000..1df6c19
--- /dev/null
+++ b/include/xen/page.h
@@ -0,0 +1,179 @@
+#ifndef __XEN_PAGE_H
+#define __XEN_PAGE_H
+
+#include <linux/pfn.h>
+
+#include <asm/uaccess.h>
+
+#include <xen/features.h>
+
+#ifdef CONFIG_X86_PAE
+/* Xen machine address */
+typedef struct xmaddr {
+	unsigned long long maddr;
+} xmaddr_t;
+
+/* Xen pseudo-physical address */
+typedef struct xpaddr {
+	unsigned long long paddr;
+} xpaddr_t;
+#else
+/* Xen machine address */
+typedef struct xmaddr {
+	unsigned long maddr;
+} xmaddr_t;
+
+/* Xen pseudo-physical address */
+typedef struct xpaddr {
+	unsigned long paddr;
+} xpaddr_t;
+#endif
+
+#define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
+#define XPADDR(x)	((xpaddr_t) { .paddr = (x) })
+
+/**** MACHINE <-> PHYSICAL CONVERSION MACROS ****/
+#define INVALID_P2M_ENTRY	(~0UL)
+#define FOREIGN_FRAME_BIT	(1UL<<31)
+#define FOREIGN_FRAME(m)	((m) | FOREIGN_FRAME_BIT)
+
+extern unsigned long *phys_to_machine_mapping;
+
+static inline unsigned long pfn_to_mfn(unsigned long pfn)
+{
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return pfn;
+
+	return phys_to_machine_mapping[(unsigned int)(pfn)] &
+		~FOREIGN_FRAME_BIT;
+}
+
+static inline int phys_to_machine_mapping_valid(unsigned long pfn)
+{
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return 1;
+
+	return (phys_to_machine_mapping[pfn] != INVALID_P2M_ENTRY);
+}
+
+static inline unsigned long mfn_to_pfn(unsigned long mfn)
+{
+	unsigned long pfn;
+
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return mfn;
+
+#if 0
+	if (unlikely((mfn >> machine_to_phys_order) != 0))
+		return max_mapnr;
+#endif
+
+	pfn = 0;
+	/*
+	 * The array access can fail (e.g., device space beyond end of RAM).
+	 * In such cases it doesn't matter what we return (we return garbage),
+	 * but we must handle the fault without crashing!
+	 */
+	__get_user(pfn, &machine_to_phys_mapping[mfn]);
+
+	return pfn;
+}
+
+static inline xmaddr_t phys_to_machine(xpaddr_t phys)
+{
+	unsigned offset = phys.paddr & ~PAGE_MASK;
+	return XMADDR(PFN_PHYS((u64)pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset);
+}
+
+static inline xpaddr_t machine_to_phys(xmaddr_t machine)
+{
+	unsigned offset = machine.maddr & ~PAGE_MASK;
+	return XPADDR(PFN_PHYS((u64)mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset);
+}
+
+/*
+ * We detect special mappings in one of two ways:
+ *  1. If the MFN is an I/O page then Xen will set the m2p entry
+ *     to be outside our maximum possible pseudophys range.
+ *  2. If the MFN belongs to a different domain then we will certainly
+ *     not have MFN in our p2m table. Conversely, if the page is ours,
+ *     then we'll have p2m(m2p(MFN))==MFN.
+ * If we detect a special mapping then it doesn't have a 'struct page'.
+ * We force !pfn_valid() by returning an out-of-range pointer.
+ *
+ * NB. These checks require that, for any MFN that is not in our reservation,
+ * there is no PFN such that p2m(PFN) == MFN. Otherwise we can get confused if
+ * we are foreign-mapping the MFN, and the other domain as m2p(MFN) == PFN.
+ * Yikes! Various places must poke in INVALID_P2M_ENTRY for safety.
+ *
+ * NB2. When deliberately mapping foreign pages into the p2m table, you *must*
+ *      use FOREIGN_FRAME(). This will cause pte_pfn() to choke on it, as we
+ *      require. In all the cases we care about, the FOREIGN_FRAME bit is
+ *      masked (e.g., pfn_to_mfn()) so behaviour there is correct.
+ */
+static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
+{
+	extern unsigned long max_mapnr;
+	unsigned long pfn = mfn_to_pfn(mfn);
+	if ((pfn < max_mapnr)
+	    && !xen_feature(XENFEAT_auto_translated_physmap)
+	    && (phys_to_machine_mapping[pfn] != mfn))
+		return max_mapnr; /* force !pfn_valid() */
+	return pfn;
+}
+
+static inline void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	if (xen_feature(XENFEAT_auto_translated_physmap)) {
+		BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+		return;
+	}
+	phys_to_machine_mapping[pfn] = mfn;
+}
+
+/* VIRT <-> MACHINE conversion */
+#define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
+#define virt_to_mfn(v)		(pfn_to_mfn(PFN_DOWN(__pa(v))))
+#define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
+
+#ifdef CONFIG_X86_PAE
+#define pte_mfn(_pte) (((_pte).pte_low >> PAGE_SHIFT) |			\
+		       (((_pte).pte_high & 0xfff) << (32-PAGE_SHIFT)))
+
+static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
+{
+	pte_t pte;
+
+	pte.pte_high = (page_nr >> (32 - PAGE_SHIFT)) |
+		(pgprot_val(pgprot) >> 32);
+	pte.pte_high &= (__supported_pte_mask >> 32);
+	pte.pte_low = ((page_nr << PAGE_SHIFT) | pgprot_val(pgprot));
+	pte.pte_low &= __supported_pte_mask;
+
+	return pte;
+}
+
+static inline unsigned long long pte_val_ma(pte_t x)
+{
+	return ((unsigned long long)x.pte_high << 32) | x.pte_low;
+}
+#define pmd_val_ma(v) ((v).pmd)
+#define pud_val_ma(v) ((v).pgd.pgd)
+#define __pte_ma(x)	((pte_t) { .pte_low = (x), .pte_high = (x)>>32 } )
+#define __pmd_ma(x)	((pmd_t) { (x) } )
+#else  /* !X86_PAE */
+#define pte_mfn(_pte) ((_pte).pte_low >> PAGE_SHIFT)
+#define mfn_pte(pfn, prot)	__pte_ma(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pte_val_ma(x)	((x).pte_low)
+#define pmd_val_ma(v)	((v).pud.pgd.pgd)
+#define __pte_ma(x)	((pte_t) { (x) } )
+#endif	/* CONFIG_X86_PAE */
+
+#define pgd_val_ma(x)	((x).pgd)
+
+
+xmaddr_t arbitrary_virt_to_machine(unsigned long address);
+void make_lowmem_page_readonly(void *vaddr);
+void make_lowmem_page_readwrite(void *vaddr);
+
+#endif /* __XEN_PAGE_H */
diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h
new file mode 100644
index 0000000..6f7c290
--- /dev/null
+++ b/include/xen/xenbus.h
@@ -0,0 +1,234 @@
+/******************************************************************************
+ * xenbus.h
+ *
+ * Talks to Xen Store to figure out what devices we have.
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ * Copyright (C) 2005 XenSource Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _XEN_XENBUS_H
+#define _XEN_XENBUS_H
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/grant_table.h>
+#include <xen/interface/io/xenbus.h>
+#include <xen/interface/io/xs_wire.h>
+
+/* Register callback to watch this node. */
+struct xenbus_watch
+{
+	struct list_head list;
+
+	/* Path being watched. */
+	const char *node;
+
+	/* Callback (executed in a process context with no locks held). */
+	void (*callback)(struct xenbus_watch *,
+			 const char **vec, unsigned int len);
+};
+
+
+/* A xenbus device. */
+struct xenbus_device {
+	const char *devicetype;
+	const char *nodename;
+	const char *otherend;
+	int otherend_id;
+	struct xenbus_watch otherend_watch;
+	struct device dev;
+	enum xenbus_state state;
+	struct completion down;
+};
+
+static inline struct xenbus_device *to_xenbus_device(struct device *dev)
+{
+	return container_of(dev, struct xenbus_device, dev);
+}
+
+struct xenbus_device_id
+{
+	/* .../device/<device_type>/<identifier> */
+	char devicetype[32]; 	/* General class of device. */
+};
+
+/* A xenbus driver. */
+struct xenbus_driver {
+	char *name;
+	struct module *owner;
+	const struct xenbus_device_id *ids;
+	int (*probe)(struct xenbus_device *dev,
+		     const struct xenbus_device_id *id);
+	void (*otherend_changed)(struct xenbus_device *dev,
+				 enum xenbus_state backend_state);
+	int (*remove)(struct xenbus_device *dev);
+	int (*suspend)(struct xenbus_device *dev);
+	int (*suspend_cancel)(struct xenbus_device *dev);
+	int (*resume)(struct xenbus_device *dev);
+	int (*uevent)(struct xenbus_device *, char **, int, char *, int);
+	struct device_driver driver;
+	int (*read_otherend_details)(struct xenbus_device *dev);
+};
+
+static inline struct xenbus_driver *to_xenbus_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct xenbus_driver, driver);
+}
+
+int __must_check __xenbus_register_frontend(struct xenbus_driver *drv,
+					    struct module *owner,
+					    const char *mod_name);
+
+static inline int __must_check
+xenbus_register_frontend(struct xenbus_driver *drv)
+{
+	WARN_ON(drv->owner != THIS_MODULE);
+	return __xenbus_register_frontend(drv, THIS_MODULE, KBUILD_MODNAME);
+}
+
+int __must_check __xenbus_register_backend(struct xenbus_driver *drv,
+					   struct module *owner,
+					   const char *mod_name);
+static inline int __must_check
+xenbus_register_backend(struct xenbus_driver *drv)
+{
+	WARN_ON(drv->owner != THIS_MODULE);
+	return __xenbus_register_backend(drv, THIS_MODULE, KBUILD_MODNAME);
+}
+
+void xenbus_unregister_driver(struct xenbus_driver *drv);
+
+struct xenbus_transaction
+{
+	u32 id;
+};
+
+/* Nil transaction ID. */
+#define XBT_NIL ((struct xenbus_transaction) { 0 })
+
+int __init xenbus_dev_init(void);
+
+char **xenbus_directory(struct xenbus_transaction t,
+			const char *dir, const char *node, unsigned int *num);
+void *xenbus_read(struct xenbus_transaction t,
+		  const char *dir, const char *node, unsigned int *len);
+int xenbus_write(struct xenbus_transaction t,
+		 const char *dir, const char *node, const char *string);
+int xenbus_mkdir(struct xenbus_transaction t,
+		 const char *dir, const char *node);
+int xenbus_exists(struct xenbus_transaction t,
+		  const char *dir, const char *node);
+int xenbus_rm(struct xenbus_transaction t, const char *dir, const char *node);
+int xenbus_transaction_start(struct xenbus_transaction *t);
+int xenbus_transaction_end(struct xenbus_transaction t, int abort);
+
+/* Single read and scanf: returns -errno or num scanned if > 0. */
+int xenbus_scanf(struct xenbus_transaction t,
+		 const char *dir, const char *node, const char *fmt, ...)
+	__attribute__((format(scanf, 4, 5)));
+
+/* Single printf and write: returns -errno or 0. */
+int xenbus_printf(struct xenbus_transaction t,
+		  const char *dir, const char *node, const char *fmt, ...)
+	__attribute__((format(printf, 4, 5)));
+
+/* Generic read function: NULL-terminated triples of name,
+ * sprintf-style type string, and pointer. Returns 0 or errno.*/
+int xenbus_gather(struct xenbus_transaction t, const char *dir, ...);
+
+/* notifer routines for when the xenstore comes up */
+extern int xenstored_ready;
+int register_xenstore_notifier(struct notifier_block *nb);
+void unregister_xenstore_notifier(struct notifier_block *nb);
+
+int register_xenbus_watch(struct xenbus_watch *watch);
+void unregister_xenbus_watch(struct xenbus_watch *watch);
+void xs_suspend(void);
+void xs_resume(void);
+void xs_suspend_cancel(void);
+
+/* Used by xenbus_dev to borrow kernel's store connection. */
+void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg);
+
+struct work_struct;
+
+/* Prepare for domain suspend: then resume or cancel the suspend. */
+void xenbus_suspend(void);
+void xenbus_resume(void);
+void xenbus_probe(struct work_struct *);
+void xenbus_suspend_cancel(void);
+
+#define XENBUS_IS_ERR_READ(str) ({			\
+	if (!IS_ERR(str) && strlen(str) == 0) {		\
+		kfree(str);				\
+		str = ERR_PTR(-ERANGE);			\
+	}						\
+	IS_ERR(str);					\
+})
+
+#define XENBUS_EXIST_ERR(err) ((err) == -ENOENT || (err) == -ERANGE)
+
+int xenbus_watch_path(struct xenbus_device *dev, const char *path,
+		      struct xenbus_watch *watch,
+		      void (*callback)(struct xenbus_watch *,
+				       const char **, unsigned int));
+int xenbus_watch_pathfmt(struct xenbus_device *dev, struct xenbus_watch *watch,
+			 void (*callback)(struct xenbus_watch *,
+					  const char **, unsigned int),
+			 const char *pathfmt, ...)
+	__attribute__ ((format (printf, 4, 5)));
+
+int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state new_state);
+int xenbus_grant_ring(struct xenbus_device *dev, unsigned long ring_mfn);
+int xenbus_map_ring_valloc(struct xenbus_device *dev,
+			   int gnt_ref, void **vaddr);
+int xenbus_map_ring(struct xenbus_device *dev, int gnt_ref,
+			   grant_handle_t *handle, void *vaddr);
+
+int xenbus_unmap_ring_vfree(struct xenbus_device *dev, void *vaddr);
+int xenbus_unmap_ring(struct xenbus_device *dev,
+		      grant_handle_t handle, void *vaddr);
+
+int xenbus_alloc_evtchn(struct xenbus_device *dev, int *port);
+int xenbus_bind_evtchn(struct xenbus_device *dev, int remote_port, int *port);
+int xenbus_free_evtchn(struct xenbus_device *dev, int port);
+
+enum xenbus_state xenbus_read_driver_state(const char *path);
+
+void xenbus_dev_error(struct xenbus_device *dev, int err, const char *fmt, ...);
+void xenbus_dev_fatal(struct xenbus_device *dev, int err, const char *fmt, ...);
+
+const char *xenbus_strstate(enum xenbus_state state);
+int xenbus_dev_is_online(struct xenbus_device *dev);
+int xenbus_frontend_closed(struct xenbus_device *dev);
+
+#endif /* _XEN_XENBUS_H */
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index b4796d8..57e6448 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -516,7 +516,7 @@
 	envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
 	envp[i] = NULL;
 
-	call_usermodehelper(argv[0], argv, envp, 0);
+	call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
 	kfree(pathbuf);
 }
 
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 4d32eb0..78d365c 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -119,9 +119,10 @@
 	char **argv;
 	char **envp;
 	struct key *ring;
-	int wait;
+	enum umh_wait wait;
 	int retval;
 	struct file *stdin;
+	void (*cleanup)(char **argv, char **envp);
 };
 
 /*
@@ -180,6 +181,14 @@
 	do_exit(0);
 }
 
+void call_usermodehelper_freeinfo(struct subprocess_info *info)
+{
+	if (info->cleanup)
+		(*info->cleanup)(info->argv, info->envp);
+	kfree(info);
+}
+EXPORT_SYMBOL(call_usermodehelper_freeinfo);
+
 /* Keventd can't block, but this (a child) can. */
 static int wait_for_helper(void *data)
 {
@@ -216,8 +225,8 @@
 			sub_info->retval = ret;
 	}
 
-	if (sub_info->wait < 0)
-		kfree(sub_info);
+	if (sub_info->wait == UMH_NO_WAIT)
+		call_usermodehelper_freeinfo(sub_info);
 	else
 		complete(sub_info->complete);
 	return 0;
@@ -229,102 +238,103 @@
 	struct subprocess_info *sub_info =
 		container_of(work, struct subprocess_info, work);
 	pid_t pid;
-	int wait = sub_info->wait;
+	enum umh_wait wait = sub_info->wait;
 
 	/* CLONE_VFORK: wait until the usermode helper has execve'd
 	 * successfully We need the data structures to stay around
 	 * until that is done.  */
-	if (wait)
+	if (wait == UMH_WAIT_PROC || wait == UMH_NO_WAIT)
 		pid = kernel_thread(wait_for_helper, sub_info,
 				    CLONE_FS | CLONE_FILES | SIGCHLD);
 	else
 		pid = kernel_thread(____call_usermodehelper, sub_info,
 				    CLONE_VFORK | SIGCHLD);
 
-	if (wait < 0)
-		return;
+	switch (wait) {
+	case UMH_NO_WAIT:
+		break;
 
-	if (pid < 0) {
+	case UMH_WAIT_PROC:
+		if (pid > 0)
+			break;
 		sub_info->retval = pid;
+		/* FALLTHROUGH */
+
+	case UMH_WAIT_EXEC:
 		complete(sub_info->complete);
-	} else if (!wait)
-		complete(sub_info->complete);
+	}
 }
 
 /**
- * call_usermodehelper_keys - start a usermode application
- * @path: pathname for the application
- * @argv: null-terminated argument list
- * @envp: null-terminated environment list
- * @session_keyring: session keyring for process (NULL for an empty keyring)
- * @wait: wait for the application to finish and return status.
- *        when -1 don't wait at all, but you get no useful error back when
- *        the program couldn't be exec'ed. This makes it safe to call
- *        from interrupt context.
+ * call_usermodehelper_setup - prepare to call a usermode helper
+ * @path - path to usermode executable
+ * @argv - arg vector for process
+ * @envp - environment for process
  *
- * Runs a user-space application.  The application is started
- * asynchronously if wait is not set, and runs as a child of keventd.
- * (ie. it runs with full root capabilities).
- *
- * Must be called from process context.  Returns a negative error code
- * if program was not execed successfully, or 0.
+ * Returns either NULL on allocation failure, or a subprocess_info
+ * structure.  This should be passed to call_usermodehelper_exec to
+ * exec the process and free the structure.
  */
-int call_usermodehelper_keys(char *path, char **argv, char **envp,
-			     struct key *session_keyring, int wait)
+struct subprocess_info *call_usermodehelper_setup(char *path,
+						  char **argv, char **envp)
 {
-	DECLARE_COMPLETION_ONSTACK(done);
 	struct subprocess_info *sub_info;
-	int retval;
-
-	if (!khelper_wq)
-		return -EBUSY;
-
-	if (path[0] == '\0')
-		return 0;
-
 	sub_info = kzalloc(sizeof(struct subprocess_info),  GFP_ATOMIC);
 	if (!sub_info)
-		return -ENOMEM;
+		goto out;
 
 	INIT_WORK(&sub_info->work, __call_usermodehelper);
-	sub_info->complete = &done;
 	sub_info->path = path;
 	sub_info->argv = argv;
 	sub_info->envp = envp;
-	sub_info->ring = session_keyring;
-	sub_info->wait = wait;
 
-	queue_work(khelper_wq, &sub_info->work);
-	if (wait < 0) /* task has freed sub_info */
-		return 0;
-	wait_for_completion(&done);
-	retval = sub_info->retval;
-	kfree(sub_info);
-	return retval;
+  out:
+	return sub_info;
 }
-EXPORT_SYMBOL(call_usermodehelper_keys);
+EXPORT_SYMBOL(call_usermodehelper_setup);
 
-int call_usermodehelper_pipe(char *path, char **argv, char **envp,
-			     struct file **filp)
+/**
+ * call_usermodehelper_setkeys - set the session keys for usermode helper
+ * @info: a subprocess_info returned by call_usermodehelper_setup
+ * @session_keyring: the session keyring for the process
+ */
+void call_usermodehelper_setkeys(struct subprocess_info *info,
+				 struct key *session_keyring)
 {
-	DECLARE_COMPLETION(done);
-	struct subprocess_info sub_info = {
-		.work		= __WORK_INITIALIZER(sub_info.work,
-						     __call_usermodehelper),
-		.complete	= &done,
-		.path		= path,
-		.argv		= argv,
-		.envp		= envp,
-		.retval		= 0,
-	};
+	info->ring = session_keyring;
+}
+EXPORT_SYMBOL(call_usermodehelper_setkeys);
+
+/**
+ * call_usermodehelper_setcleanup - set a cleanup function
+ * @info: a subprocess_info returned by call_usermodehelper_setup
+ * @cleanup: a cleanup function
+ *
+ * The cleanup function is just befor ethe subprocess_info is about to
+ * be freed.  This can be used for freeing the argv and envp.  The
+ * Function must be runnable in either a process context or the
+ * context in which call_usermodehelper_exec is called.
+ */
+void call_usermodehelper_setcleanup(struct subprocess_info *info,
+				    void (*cleanup)(char **argv, char **envp))
+{
+	info->cleanup = cleanup;
+}
+EXPORT_SYMBOL(call_usermodehelper_setcleanup);
+
+/**
+ * call_usermodehelper_stdinpipe - set up a pipe to be used for stdin
+ * @sub_info: a subprocess_info returned by call_usermodehelper_setup
+ * @filp: set to the write-end of a pipe
+ *
+ * This constructs a pipe, and sets the read end to be the stdin of the
+ * subprocess, and returns the write-end in *@filp.
+ */
+int call_usermodehelper_stdinpipe(struct subprocess_info *sub_info,
+				  struct file **filp)
+{
 	struct file *f;
 
-	if (!khelper_wq)
-		return -EBUSY;
-
-	if (path[0] == '\0')
-		return 0;
-
 	f = create_write_pipe();
 	if (IS_ERR(f))
 		return PTR_ERR(f);
@@ -335,11 +345,85 @@
 		free_write_pipe(*filp);
 		return PTR_ERR(f);
 	}
-	sub_info.stdin = f;
+	sub_info->stdin = f;
 
-	queue_work(khelper_wq, &sub_info.work);
+	return 0;
+}
+EXPORT_SYMBOL(call_usermodehelper_stdinpipe);
+
+/**
+ * call_usermodehelper_exec - start a usermode application
+ * @sub_info: information about the subprocessa
+ * @wait: wait for the application to finish and return status.
+ *        when -1 don't wait at all, but you get no useful error back when
+ *        the program couldn't be exec'ed. This makes it safe to call
+ *        from interrupt context.
+ *
+ * Runs a user-space application.  The application is started
+ * asynchronously if wait is not set, and runs as a child of keventd.
+ * (ie. it runs with full root capabilities).
+ */
+int call_usermodehelper_exec(struct subprocess_info *sub_info,
+			     enum umh_wait wait)
+{
+	DECLARE_COMPLETION_ONSTACK(done);
+	int retval;
+
+	if (sub_info->path[0] == '\0') {
+		retval = 0;
+		goto out;
+	}
+
+	if (!khelper_wq) {
+		retval = -EBUSY;
+		goto out;
+	}
+
+	sub_info->complete = &done;
+	sub_info->wait = wait;
+
+	queue_work(khelper_wq, &sub_info->work);
+	if (wait == UMH_NO_WAIT) /* task has freed sub_info */
+		return 0;
 	wait_for_completion(&done);
-	return sub_info.retval;
+	retval = sub_info->retval;
+
+  out:
+	call_usermodehelper_freeinfo(sub_info);
+	return retval;
+}
+EXPORT_SYMBOL(call_usermodehelper_exec);
+
+/**
+ * call_usermodehelper_pipe - call a usermode helper process with a pipe stdin
+ * @path: path to usermode executable
+ * @argv: arg vector for process
+ * @envp: environment for process
+ * @filp: set to the write-end of a pipe
+ *
+ * This is a simple wrapper which executes a usermode-helper function
+ * with a pipe as stdin.  It is implemented entirely in terms of
+ * lower-level call_usermodehelper_* functions.
+ */
+int call_usermodehelper_pipe(char *path, char **argv, char **envp,
+			     struct file **filp)
+{
+	struct subprocess_info *sub_info;
+	int ret;
+
+	sub_info = call_usermodehelper_setup(path, argv, envp);
+	if (sub_info == NULL)
+		return -ENOMEM;
+
+	ret = call_usermodehelper_stdinpipe(sub_info, filp);
+	if (ret < 0)
+		goto out;
+
+	return call_usermodehelper_exec(sub_info, 1);
+
+  out:
+	call_usermodehelper_freeinfo(sub_info);
+	return ret;
 }
 EXPORT_SYMBOL(call_usermodehelper_pipe);
 
diff --git a/kernel/sys.c b/kernel/sys.c
index 4d141ae..18987c7 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -2286,3 +2286,61 @@
 	}
 	return err ? -EFAULT : 0;
 }
+
+char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";
+
+static void argv_cleanup(char **argv, char **envp)
+{
+	argv_free(argv);
+}
+
+/**
+ * orderly_poweroff - Trigger an orderly system poweroff
+ * @force: force poweroff if command execution fails
+ *
+ * This may be called from any context to trigger a system shutdown.
+ * If the orderly shutdown fails, it will force an immediate shutdown.
+ */
+int orderly_poweroff(bool force)
+{
+	int argc;
+	char **argv = argv_split(GFP_ATOMIC, poweroff_cmd, &argc);
+	static char *envp[] = {
+		"HOME=/",
+		"PATH=/sbin:/bin:/usr/sbin:/usr/bin",
+		NULL
+	};
+	int ret = -ENOMEM;
+	struct subprocess_info *info;
+
+	if (argv == NULL) {
+		printk(KERN_WARNING "%s failed to allocate memory for \"%s\"\n",
+		       __func__, poweroff_cmd);
+		goto out;
+	}
+
+	info = call_usermodehelper_setup(argv[0], argv, envp);
+	if (info == NULL) {
+		argv_free(argv);
+		goto out;
+	}
+
+	call_usermodehelper_setcleanup(info, argv_cleanup);
+
+	ret = call_usermodehelper_exec(info, UMH_NO_WAIT);
+
+  out:
+	if (ret && force) {
+		printk(KERN_WARNING "Failed to start orderly shutdown: "
+		       "forcing the issue\n");
+
+		/* I guess this should try to kick off some daemon to
+		   sync and poweroff asap.  Or not even bother syncing
+		   if we're doing an emergency shutdown? */
+		emergency_sync();
+		kernel_power_off();
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(orderly_poweroff);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 7063ebc..44a1d69 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -46,6 +46,7 @@
 #include <linux/syscalls.h>
 #include <linux/nfs_fs.h>
 #include <linux/acpi.h>
+#include <linux/reboot.h>
 
 #include <asm/uaccess.h>
 #include <asm/processor.h>
@@ -705,6 +706,15 @@
 		.proc_handler   = &proc_dointvec,
 	},
 #endif
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "poweroff_cmd",
+		.data		= &poweroff_cmd,
+		.maxlen		= POWEROFF_CMD_PATH_LEN,
+		.mode		= 0644,
+		.proc_handler	= &proc_dostring,
+		.strategy	= &sysctl_string,
+	},
 
 	{ .ctl_name = 0 }
 };
diff --git a/lib/Makefile b/lib/Makefile
index da68b2c..6149663 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -5,7 +5,7 @@
 lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 rbtree.o radix-tree.o dump_stack.o \
 	 idr.o int_sqrt.o bitmap.o extable.o prio_tree.o \
-	 sha1.o irq_regs.o reciprocal_div.o
+	 sha1.o irq_regs.o reciprocal_div.o argv_split.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
diff --git a/lib/argv_split.c b/lib/argv_split.c
new file mode 100644
index 0000000..4096ed4
--- /dev/null
+++ b/lib/argv_split.c
@@ -0,0 +1,105 @@
+/*
+ * Helper function for splitting a string into an argv-like array.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/bug.h>
+
+static const char *skip_sep(const char *cp)
+{
+	while (*cp && isspace(*cp))
+		cp++;
+
+	return cp;
+}
+
+static const char *skip_arg(const char *cp)
+{
+	while (*cp && !isspace(*cp))
+		cp++;
+
+	return cp;
+}
+
+static int count_argc(const char *str)
+{
+	int count = 0;
+
+	while (*str) {
+		str = skip_sep(str);
+		if (*str) {
+			count++;
+			str = skip_arg(str);
+		}
+	}
+
+	return count;
+}
+
+/**
+ * argv_free - free an argv
+ * @argv - the argument vector to be freed
+ *
+ * Frees an argv and the strings it points to.
+ */
+void argv_free(char **argv)
+{
+	char **p;
+	for (p = argv; *p; p++)
+		kfree(*p);
+
+	kfree(argv);
+}
+EXPORT_SYMBOL(argv_free);
+
+/**
+ * argv_split - split a string at whitespace, returning an argv
+ * @gfp: the GFP mask used to allocate memory
+ * @str: the string to be split
+ * @argcp: returned argument count
+ *
+ * Returns an array of pointers to strings which are split out from
+ * @str.  This is performed by strictly splitting on white-space; no
+ * quote processing is performed.  Multiple whitespace characters are
+ * considered to be a single argument separator.  The returned array
+ * is always NULL-terminated.  Returns NULL on memory allocation
+ * failure.
+ */
+char **argv_split(gfp_t gfp, const char *str, int *argcp)
+{
+	int argc = count_argc(str);
+	char **argv = kzalloc(sizeof(*argv) * (argc+1), gfp);
+	char **argvp;
+
+	if (argv == NULL)
+		goto out;
+
+	*argcp = argc;
+	argvp = argv;
+
+	while (*str) {
+		str = skip_sep(str);
+
+		if (*str) {
+			const char *p = str;
+			char *t;
+
+			str = skip_arg(str);
+
+			t = kstrndup(p, str-p, gfp);
+			if (t == NULL)
+				goto fail;
+			*argvp++ = t;
+		}
+	}
+	*argvp = NULL;
+
+  out:
+	return argv;
+
+  fail:
+	argv_free(argv);
+	return NULL;
+}
+EXPORT_SYMBOL(argv_split);
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 12e311d..bd5ecbb 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -208,7 +208,7 @@
 		argv [0] = uevent_helper;
 		argv [1] = (char *)subsystem;
 		argv [2] = NULL;
-		call_usermodehelper (argv[0], argv, envp, 0);
+		call_usermodehelper (argv[0], argv, envp, UMH_WAIT_EXEC);
 	}
 
 exit:
diff --git a/mm/util.c b/mm/util.c
index 78f3783..bf340d8 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -6,7 +6,6 @@
 
 /**
  * kstrdup - allocate space for and copy an existing string
- *
  * @s: the string to duplicate
  * @gfp: the GFP mask used in the kmalloc() call when allocating memory
  */
@@ -27,6 +26,30 @@
 EXPORT_SYMBOL(kstrdup);
 
 /**
+ * kstrndup - allocate space for and copy an existing string
+ * @s: the string to duplicate
+ * @max: read at most @max chars from @s
+ * @gfp: the GFP mask used in the kmalloc() call when allocating memory
+ */
+char *kstrndup(const char *s, size_t max, gfp_t gfp)
+{
+	size_t len;
+	char *buf;
+
+	if (!s)
+		return NULL;
+
+	len = strnlen(s, max);
+	buf = kmalloc_track_caller(len+1, gfp);
+	if (buf) {
+		memcpy(buf, s, len);
+		buf[len] = '\0';
+	}
+	return buf;
+}
+EXPORT_SYMBOL(kstrndup);
+
+/**
  * kmemdup - duplicate region of memory
  *
  * @src: memory region to duplicate
@@ -80,7 +103,6 @@
 
 /*
  * strndup_user - duplicate an existing string from user space
- *
  * @s: The string to duplicate
  * @n: Maximum number of bytes to copy, including the trailing NUL.
  */
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 8e05a11..3130c34 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -767,3 +767,56 @@
 void  __attribute__((weak)) vmalloc_sync_all(void)
 {
 }
+
+
+static int f(pte_t *pte, struct page *pmd_page, unsigned long addr, void *data)
+{
+	/* apply_to_page_range() does all the hard work. */
+	return 0;
+}
+
+/**
+ *	alloc_vm_area - allocate a range of kernel address space
+ *	@size:		size of the area
+ *	@returns:	NULL on failure, vm_struct on success
+ *
+ *	This function reserves a range of kernel address space, and
+ *	allocates pagetables to map that range.  No actual mappings
+ *	are created.  If the kernel address space is not shared
+ *	between processes, it syncs the pagetable across all
+ *	processes.
+ */
+struct vm_struct *alloc_vm_area(size_t size)
+{
+	struct vm_struct *area;
+
+	area = get_vm_area(size, VM_IOREMAP);
+	if (area == NULL)
+		return NULL;
+
+	/*
+	 * This ensures that page tables are constructed for this region
+	 * of kernel virtual address space and mapped into init_mm.
+	 */
+	if (apply_to_page_range(&init_mm, (unsigned long)area->addr,
+				area->size, f, NULL)) {
+		free_vm_area(area);
+		return NULL;
+	}
+
+	/* Make sure the pagetables are constructed in process kernel
+	   mappings */
+	vmalloc_sync_all();
+
+	return area;
+}
+EXPORT_SYMBOL_GPL(alloc_vm_area);
+
+void free_vm_area(struct vm_struct *area)
+{
+	struct vm_struct *ret;
+	ret = remove_vm_area(area->addr);
+	BUG_ON(ret != area);
+	kfree(area);
+}
+EXPORT_SYMBOL_GPL(free_vm_area);
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index a786e78..1ea2f86 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -125,7 +125,7 @@
 	char *argv[] = { BR_STP_PROG, br->dev->name, "start", NULL };
 	char *envp[] = { NULL };
 
-	r = call_usermodehelper(BR_STP_PROG, argv, envp, 1);
+	r = call_usermodehelper(BR_STP_PROG, argv, envp, UMH_WAIT_PROC);
 	if (r == 0) {
 		br->stp_enabled = BR_USER_STP;
 		printk(KERN_INFO "%s: userspace STP started\n", br->dev->name);
diff --git a/net/irda/irias_object.c b/net/irda/irias_object.c
index 4adaae2..cf30245 100644
--- a/net/irda/irias_object.c
+++ b/net/irda/irias_object.c
@@ -36,39 +36,6 @@
  */
 struct ias_value irias_missing = { IAS_MISSING, 0, 0, 0, {0}};
 
-/*
- * Function strndup (str, max)
- *
- *    My own kernel version of strndup!
- *
- * Faster, check boundary... Jean II
- */
-static char *strndup(char *str, size_t max)
-{
-	char *new_str;
-	int len;
-
-	/* Check string */
-	if (str == NULL)
-		return NULL;
-	/* Check length, truncate */
-	len = strlen(str);
-	if(len > max)
-		len = max;
-
-	/* Allocate new string */
-	new_str = kmalloc(len + 1, GFP_ATOMIC);
-	if (new_str == NULL) {
-		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
-		return NULL;
-	}
-
-	/* Copy and truncate */
-	memcpy(new_str, str, len);
-	new_str[len] = '\0';
-
-	return new_str;
-}
 
 /*
  * Function ias_new_object (name, id)
@@ -90,7 +57,7 @@
 	}
 
 	obj->magic = IAS_OBJECT_MAGIC;
-	obj->name = strndup(name, IAS_MAX_CLASSNAME);
+	obj->name = kstrndup(name, IAS_MAX_CLASSNAME, GFP_ATOMIC);
 	if (!obj->name) {
 		IRDA_WARNING("%s(), Unable to allocate name!\n",
 			     __FUNCTION__);
@@ -360,7 +327,7 @@
 	}
 
 	attrib->magic = IAS_ATTRIB_MAGIC;
-	attrib->name = strndup(name, IAS_MAX_ATTRIBNAME);
+	attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC);
 
 	/* Insert value */
 	attrib->value = irias_new_integer_value(value);
@@ -404,7 +371,7 @@
 	}
 
 	attrib->magic = IAS_ATTRIB_MAGIC;
-	attrib->name = strndup(name, IAS_MAX_ATTRIBNAME);
+	attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC);
 
 	attrib->value = irias_new_octseq_value( octets, len);
 	if (!attrib->name || !attrib->value) {
@@ -446,7 +413,7 @@
 	}
 
 	attrib->magic = IAS_ATTRIB_MAGIC;
-	attrib->name = strndup(name, IAS_MAX_ATTRIBNAME);
+	attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC);
 
 	attrib->value = irias_new_string_value(value);
 	if (!attrib->name || !attrib->value) {
@@ -506,7 +473,7 @@
 
 	value->type = IAS_STRING;
 	value->charset = CS_ASCII;
-	value->t.string = strndup(string, IAS_MAX_STRING);
+	value->t.string = kstrndup(string, IAS_MAX_STRING, GFP_ATOMIC);
 	if (!value->t.string) {
 		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
 		kfree(value);
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index f573ac1..5575001 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -108,7 +108,8 @@
 	argv[i] = NULL;
 
 	/* do it */
-	ret = call_usermodehelper_keys(argv[0], argv, envp, keyring, 1);
+	ret = call_usermodehelper_keys(argv[0], argv, envp, keyring,
+				       UMH_WAIT_PROC);
 
 error_link:
 	key_put(keyring);