arm/dt: 8226: move SOC devices into a common dtsi

Move SOC specific devices to a common 8226 DTS include file. The
sim dts file will only include devices that are either enabled or
specific to sim.

Change-Id: Ic99296a8191b109877ba1ecb44291371a8fa25d0
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
diff --git a/arch/arm/boot/dts/msm8226.dtsi b/arch/arm/boot/dts/msm8226.dtsi
new file mode 100644
index 0000000..6d2ffec
--- /dev/null
+++ b/arch/arm/boot/dts/msm8226.dtsi
@@ -0,0 +1,72 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm MSM 8226";
+	compatible = "qcom,msm8226";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller@f9000000 {
+		compatible = "qcom,msm-qgic2";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0xF9000000 0x1000>,
+		      <0xF9002000 0x1000>;
+	};
+
+	msmgpio: gpio@fd510000 {
+		compatible = "qcom,msm-gpio";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0xfd510000 0x4000>;
+		#gpio-cells = <2>;
+	};
+
+	timer {
+		compatible = "qcom,msm-qtimer", "arm,armv7-timer";
+		interrupts = <1 2 0 1 3 0>;
+		clock-frequency = <19200000>;
+	};
+
+	serial@f991f000 {
+		compatible = "qcom,msm-lsuart-v14";
+		reg = <0xf991f000 0x1000>;
+		interrupts = <0 109 0>;
+		status = "disabled";
+	};
+
+	serial@f995e000 {
+		compatible = "qcom,msm-lsuart-v14";
+		reg = <0xf995e000 0x1000>;
+		interrupts = <0 114 0>;
+		status = "disabled";
+	};
+
+        usb@f9a55000 {
+		compatible = "qcom,hsusb-otg";
+		reg = <0xf9a55000 0x400>;
+		interrupts = <0 134 0>;
+		interrupt-names = "core_irq";
+
+		qcom,hsusb-otg-phy-type = <2>;
+		qcom,hsusb-otg-mode = <1>;
+		qcom,hsusb-otg-otg-control = <1>;
+		qcom,hsusb-otg-disable-reset;
+	};
+
+	android_usb {
+		compatible = "qcom,android-usb";
+	};
+
+};