diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 14f55fd..be5dc80 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -84,7 +84,7 @@
 
 config USB_SERIAL_WHITEHEAT
 	tristate "USB ConnectTech WhiteHEAT Serial Driver"
-	depends on USB_SERIAL && BROKEN_ON_SMP
+	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
 	  USB to serial converter device.
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 6d18d4e..2357b1d 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -364,7 +364,6 @@
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	short todo;
-	int i;
 	int result;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
@@ -381,14 +380,8 @@
 		return;
 	}
 	if (urb->actual_length) {
-		for (i = 0; i < urb->actual_length ; ++i) {
-			/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
-			/* this doesn't actually push the data through unless tty->low_latency is set */
-			tty_insert_flip_char(tty, data[i], 0);
-		}
+		tty_buffer_request_room(tty, urb->actual_length);
+		tty_insert_flip_string(tty, data, urb->actual_length);
 	  	tty_flip_buffer_push(tty);
 	}
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 4e9637e..68067fe 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1263,12 +1263,10 @@
 
 	/* process read if there is data other than line status */
 	if (tty && (bytes > i)) {
+		bytes = tty_buffer_request_room(tty, bytes);
 		for (; i < bytes ; ++i) {
 			dbg("pushing byte number %d - %d - %c", i, data[i],
 					data[i]);
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		}
 		tty_flip_buffer_push(port->tty);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 8fc414b..b3f776a 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -946,13 +946,10 @@
 	spin_lock_irqsave( &priv->dp_port_lock, flags );
 
 	/* send any buffered chars from throttle time on to tty subsystem */
-	len = min(priv->dp_in_buf_len, TTY_FLIPBUF_SIZE - tty->flip.count );
+
+	len = tty_buffer_request_room(tty, priv->dp_in_buf_len);
 	if( len > 0 ) {
-		memcpy( tty->flip.char_buf_ptr, priv->dp_in_buf, len );
-		memcpy( tty->flip.flag_buf_ptr, priv->dp_in_flag_buf, len );
-		tty->flip.char_buf_ptr += len;
-		tty->flip.flag_buf_ptr += len;
-		tty->flip.count += len;
+		tty_insert_flip_string_flags(tty, priv->dp_in_buf, priv->dp_in_flag_buf, len);
 		tty_flip_buffer_push( tty );
 	}
 
@@ -1827,6 +1824,7 @@
 	int status = ((unsigned char *)urb->transfer_buffer)[2];
 	unsigned char *data = ((unsigned char *)urb->transfer_buffer)+3;
 	int flag,throttled;
+	int i;
 
 	/* do not process callbacks on closed ports */
 	/* but do continue the read chain */
@@ -1885,20 +1883,18 @@
 			}
 
 		} else {
-
-			len = min( len, TTY_FLIPBUF_SIZE - tty->flip.count );
-
+			len = tty_buffer_request_room(tty, len);
 			if( len > 0 ) {
-				memcpy( tty->flip.char_buf_ptr, data, len );
-				memset( tty->flip.flag_buf_ptr, flag, len );
-				tty->flip.char_buf_ptr += len;
-				tty->flip.flag_buf_ptr += len;
-				tty->flip.count += len;
+				/* Hot path */
+				if(flag == TTY_NORMAL)
+					tty_insert_flip_string(tty, data, len);
+				else {
+					for(i = 0; i < len; i++)
+						tty_insert_flip_char(tty, data[i], flag);
+				}
 				tty_flip_buffer_push( tty );
 			}
-
 		}
-
 	}
 
 	spin_unlock( &priv->dp_port_lock );
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 79a766e..63f7c78 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -344,7 +344,6 @@
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
-	int i;
 	int result;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
@@ -359,19 +358,8 @@
 	tty = port->tty;
 
 	if (urb->actual_length) {
-		for (i = 0; i < urb->actual_length ; ++i) {
-			/* gb - 2000/11/13
-			 * If we insert too many characters we'll overflow the buffer.
-			 * This means we'll lose bytes - Decidedly bad.
-			 */
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-				}
-			tty_insert_flip_char(tty, data[i], 0);
-		}
-		/* gb - 2000/11/13
-		 * Goes straight through instead of scheduling - if tty->low_latency is set.
-		 */
+		tty_buffer_request_room(tty, urb->actual_length);
+		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
 	}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index eb863b3..10bc1bf 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1610,24 +1610,11 @@
 			length = 0;
 		}
 
-		/* have to make sure we don't overflow the buffer
-		   with tty_insert_flip_char's */
-		if (tty->flip.count+length > TTY_FLIPBUF_SIZE) {
-			tty_flip_buffer_push(tty);
-			need_flip = 0;
-
-			if (tty->flip.count != 0) {
-				/* flip didn't work, this happens when ftdi_process_read() is
-				 * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */
-				dbg("%s - flip buffer push failed", __FUNCTION__);
-				break;
-			}
-		}
 		if (priv->rx_flags & THROTTLED) {
 			dbg("%s - throttled", __FUNCTION__);
 			break;
 		}
-		if (tty->ldisc.receive_room(tty)-tty->flip.count < length) {
+		if (tty_buffer_request_room(tty, length) < length) {
 			/* break out & wait for throttling/unthrottling to happen */
 			dbg("%s - receive room low", __FUNCTION__);
 			break;
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 452efce..d6f55e9 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -275,23 +275,14 @@
                         char *data, unsigned int actual_length)
 {
 	struct tty_struct *tty = port->tty;
-	int i;
 
 	if (tty && actual_length) {
 
 		usb_serial_debug_data(debug, &port->dev, 
 					__FUNCTION__, actual_length, data);
 
-		for (i = 0; i < actual_length ; ++i) {
-			/* if we insert more than TTY_FLIPBUF_SIZE characters,
-			   we drop them. */
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
-			/* this doesn't actually push the data through unless
-			   tty->low_latency is set */
-			tty_insert_flip_char(tty, data[i], 0);
-		}
+		tty_buffer_request_room(tty, actual_length);
+		tty_insert_flip_string(tty, data, actual_length);
 		tty_flip_buffer_push(tty);
 	}
 }
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 4ddac62..476cda1 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -254,7 +254,6 @@
 	struct usb_serial *serial = port->serial;
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
-	int i;
 	int result;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
@@ -268,14 +267,8 @@
 
 	tty = port->tty;
 	if (tty && urb->actual_length) {
-		for (i = 0; i < urb->actual_length ; ++i) {
-			/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
-			/* this doesn't actually push the data through unless tty->low_latency is set */
-			tty_insert_flip_char(tty, data[i], 0);
-		}
+		tty_buffer_request_room(tty, urb->actual_length);
+		tty_insert_flip_string(tty, data, urb->actual_length);
 	  	tty_flip_buffer_push(tty);
 	}
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index faedbeb..3f29e6b 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1965,20 +1965,14 @@
 	int cnt;
 
 	do {
-		if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-			tty_flip_buffer_push(tty);
-			if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				dev_err(dev, "%s - dropping data, %d bytes lost\n",
-					__FUNCTION__, length);
-				return;
-			}
+		cnt = tty_buffer_request_room(tty, length);
+		if (cnt < length) {
+			dev_err(dev, "%s - dropping data, %d bytes lost\n",
+					__FUNCTION__, length - cnt);
+			if(cnt == 0)
+				break;
 		}
-		cnt = min(length, TTY_FLIPBUF_SIZE - tty->flip.count);
-		memcpy(tty->flip.char_buf_ptr, data, cnt);
-		memset(tty->flip.flag_buf_ptr, 0, cnt);
-		tty->flip.char_buf_ptr += cnt;
-		tty->flip.flag_buf_ptr += cnt;
-		tty->flip.count += cnt;
+		tty_insert_flip_string(tty, data, cnt);
 		data += cnt;
 		length -= cnt;
 	} while (length > 0);
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 2edf9cab..afc0f34 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1865,20 +1865,14 @@
 	int cnt;
 
 	do {
-		if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-			tty_flip_buffer_push(tty);
-			if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				dev_err(dev, "%s - dropping data, %d bytes lost\n",
-					__FUNCTION__, length);
-				return;
-			}
+		cnt = tty_buffer_request_room(tty, length);
+		if (cnt < length) {
+			dev_err(dev, "%s - dropping data, %d bytes lost\n",
+				__FUNCTION__, length - cnt);
+			if(cnt == 0)
+				break;
 		}
-		cnt = min(length, TTY_FLIPBUF_SIZE - tty->flip.count);
-		memcpy(tty->flip.char_buf_ptr, data, cnt);
-		memset(tty->flip.flag_buf_ptr, 0, cnt);
-		tty->flip.char_buf_ptr += cnt;
-		tty->flip.flag_buf_ptr += cnt;
-		tty->flip.count += cnt;
+		tty_insert_flip_string(tty, data, cnt);
 		data += cnt;
 		length -= cnt;
 	} while (length > 0);
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 06d07ce..9a5c979 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -711,7 +711,7 @@
 	struct usb_serial_port	*port = (struct usb_serial_port *)urb->context;
 	struct tty_struct	*tty;
 	unsigned char		*data = urb->transfer_buffer;
-	int			i, result;
+	int			result;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -724,14 +724,8 @@
 
 	tty = port->tty;
 	if (tty && urb->actual_length) {
-		for (i = 0; i < urb->actual_length ; ++i) {
-			/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
-			/* this doesn't actually push the data through unless tty->low_latency is set */
-			tty_insert_flip_char(tty, data[i], 0);
-		}
+		tty_buffer_request_room(tty, urb->actual_length);
+		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
 	}
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 2dd191f..e760a70 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -166,7 +166,6 @@
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	struct tty_struct *tty;
-	int i;
 	int result;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
@@ -180,14 +179,8 @@
 
 	tty = port->tty;
 	if (tty && urb->actual_length) {
-		for (i = 0; i < urb->actual_length ; ++i) {
-			/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
-			/* this doesn't actually push the data through unless tty->low_latency is set */
-			tty_insert_flip_char(tty, data[i], 0);
-		}
+		tty_buffer_request_room(tty, urb->actual_length);
+		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 4e2f7df..78335a5 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -648,7 +648,6 @@
 		usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
 				      urb->actual_length, data);
 	} else {
-		int i;
 		int bytes_sent = ((__u8 *) data)[0] +
 				 ((unsigned int) ((__u8 *) data)[1] << 8);
 		tty = port->tty;
@@ -669,16 +668,8 @@
 			bytes_sent = urb->actual_length - 2;
 		}
 
-		for (i = 2; i < 2+bytes_sent; i++) {
-			/* if we insert more than TTY_FLIPBUF_SIZE characters,
-			 * we drop them. */
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
-			/* this doesn't actually push the data through unless 
-			 * tty->low_latency is set */
-			tty_insert_flip_char(tty, ((__u8*) data)[i], 0);
-		}
+		tty_buffer_request_room(tty, bytes_sent);
+		tty_insert_flip_string(tty, data + 2, bytes_sent);
 		tty_flip_buffer_push(tty);
 
 		/* again lockless, but debug info only */
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index d9c21e2..b8b2131 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -365,7 +365,6 @@
 
 static void kobil_read_int_callback( struct urb *purb, struct pt_regs *regs)
 {
-	int i;
 	int result;
 	struct usb_serial_port *port = (struct usb_serial_port *) purb->context;
 	struct tty_struct *tty;
@@ -397,14 +396,8 @@
 		*/
 		// END DEBUG
 
-		for (i = 0; i < purb->actual_length; ++i) {
-			// if we insert more than TTY_FLIPBUF_SIZE characters, we drop them.
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
-			// this doesn't actually push the data through unless tty->low_latency is set
-			tty_insert_flip_char(tty, data[i], 0);
-		}
+		tty_buffer_request_room(tty, purb->actual_length);
+		tty_insert_flip_string(tty, data, purb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 3fd2405..52bdf6f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -321,7 +321,7 @@
 
 static void option_indat_callback(struct urb *urb, struct pt_regs *regs)
 {
-	int i, err;
+	int err;
 	int endpoint;
 	struct usb_serial_port *port;
 	struct tty_struct *tty;
@@ -338,11 +338,8 @@
 	} else {
 		tty = port->tty;
 		if (urb->actual_length) {
-			for (i = 0; i < urb->actual_length ; ++i) {
-				if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-					tty_flip_buffer_push(tty);
-				tty_insert_flip_char(tty, data[i], 0);
-			}
+			tty_buffer_request_room(tty, urb->actual_length);
+			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
 		} else {
 			dbg("%s: empty read urb received", __FUNCTION__);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index f037210..9ffff19 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -924,16 +924,12 @@
 
 	tty = port->tty;
 	if (tty && urb->actual_length) {
+		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
 		if (status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-
-		for (i = 0; i < urb->actual_length; ++i) {
-			if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
+		for (i = 0; i < urb->actual_length; ++i)
 			tty_insert_flip_char (tty, data[i], tty_flag);
-		}
 		tty_flip_buffer_push (tty);
 	}
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index abb830c..c18db32 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1280,24 +1280,18 @@
 	int cnt;
 
 	do {
-		if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-			tty_flip_buffer_push(tty);
-			if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length);
-				return;
-			}
+		cnt = tty_buffer_request_room(tty, length);
+		if (cnt < length) {
+			dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length - cnt);
+			if(cnt == 0)
+				break;
 		}
-		cnt = min(length, TTY_FLIPBUF_SIZE - tty->flip.count);
-		memcpy(tty->flip.char_buf_ptr, data, cnt);
-		memset(tty->flip.flag_buf_ptr, 0, cnt);
-		tty->flip.char_buf_ptr += cnt;
-		tty->flip.flag_buf_ptr += cnt;
-		tty->flip.count += cnt;
+		tty_insert_flip_string(tty, data, cnt);
+		tty_flip_buffer_push(tty);
 		data += cnt;
 		length -= cnt;
 	} while (length > 0);
 
-	tty_flip_buffer_push(tty);
 }
 
 
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 49b1fbe..bce3d55 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -488,7 +488,6 @@
 	unsigned char *data = urb->transfer_buffer;
 	struct tty_struct *tty;
 	unsigned long flags;
-	int i;
 	int throttled;
 	int result;
 
@@ -503,14 +502,8 @@
 
 	tty = port->tty;
 	if (tty && urb->actual_length) {
-		for (i = 0; i < urb->actual_length ; ++i) {
-			/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-				tty_flip_buffer_push(tty);
-			}
-			/* this doesn't actually push the data through unless tty->low_latency is set */
-			tty_insert_flip_char(tty, data[i], 0);
-		}
+		tty_buffer_request_room(tty, urb->actual_length);
+		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
 	spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index a7c3c47..557411c 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1434,7 +1434,9 @@
 		urb = wrap->urb;
 
 		if (tty && urb->actual_length) {
-			if (urb->actual_length > TTY_FLIPBUF_SIZE - tty->flip.count) {
+			int len = tty_buffer_request_room(tty, urb->actual_length);
+			/* This stuff can go away now I suspect */
+			if (unlikely(len < urb->actual_length)) {
 				spin_lock_irqsave(&info->lock, flags);
 				list_add(tmp, &info->rx_urb_q);
 				spin_unlock_irqrestore(&info->lock, flags);
@@ -1442,11 +1444,8 @@
 				schedule_work(&info->rx_work);
 				return;
 			}
-
-			memcpy(tty->flip.char_buf_ptr, urb->transfer_buffer, urb->actual_length);
-			tty->flip.char_buf_ptr += urb->actual_length;
-			tty->flip.count += urb->actual_length;
-			sent += urb->actual_length;
+			tty_insert_flip_string(tty, urb->transfer_buffer, len);
+			sent += len;
 		}
 
 		urb->dev = port->serial->dev;