Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/kvm: Fix build failure with HV KVM and CBE
powerpc/ps3: Fix lv1_gpu_attribute hcall
powerpc/ps3: Fix PS3 repository build warnings
powerpc/ps3: irq: Remove IRQF_DISABLED
powerpc/irq: Remove IRQF_DISABLED
powerpc/numa: NUMA topology support for PowerNV
powerpc: Add System RAM to /proc/iomem
powerpc: Add KVM as module to defconfigs
powerpc/kvm: Fix build with older toolchains
powerpc, tqm5200: update tqm5200_defconfig to fit for charon board.
powerpc/5200: add support for charon board
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
new file mode 100644
index 0000000..0e00e50
--- /dev/null
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -0,0 +1,236 @@
+/*
+ * charon board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright (C) 2010 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "anon,charon";
+ compatible = "anon,charon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ can@900 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ usb@1000 {
+ compatible = "fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@1200 {
+ device_type = "dma-controller";
+ compatible = "fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { // PSC1
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2400 { // PSC3
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ fixed-link = <1 1 100 0 0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ };
+
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+
+ dtt@28 {
+ compatible = "national,lm80";
+ reg = <0x28>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = < 0 0 0xfc000000 0x02000000
+ 1 0 0xe0000000 0x04000000 // CS1 range, SM501
+ 3 0 0xe8000000 0x00080000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ mode = "640x480-32@60";
+ interrupts = <1 1 3>;
+ little-endian;
+ };
+
+ mram0@3,0 {
+ compatible = "mtd-ram";
+ reg = <3 0x00000 0x80000>;
+ bank-width = <1>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+ };
+};
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 959cd2c..716a37b 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,9 +1,10 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
+CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_EPOLL is not set
@@ -17,7 +18,6 @@
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_BESTCOMM=y
-CONFIG_SPARSE_IRQ=y
CONFIG_PM=y
# CONFIG_PCI is not set
CONFIG_NET=y
@@ -38,17 +38,18 @@
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ROM=y
CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_ATA=y
@@ -56,13 +57,11 @@
CONFIG_PATA_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_LXT_PHY=y
+CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FEC_MPC52xx=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
@@ -70,7 +69,13 @@
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
+CONFIG_SENSORS_LM80=y
CONFIG_WATCHDOG=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
@@ -80,10 +85,10 @@
CONFIG_USB_STORAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
@@ -102,7 +107,6 @@
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 84a685a5..535711f 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -485,3 +485,7 @@
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 96a58b7..a72f241 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -362,3 +362,7 @@
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h
index 24bd34c..936a904 100644
--- a/arch/powerpc/include/asm/floppy.h
+++ b/arch/powerpc/include/asm/floppy.h
@@ -108,10 +108,10 @@
{
if (can_use_virtual_dma)
return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", NULL);
+ 0, "floppy", NULL);
else
return request_irq(FLOPPY_IRQ, floppy_interrupt,
- IRQF_DISABLED, "floppy", NULL);
+ 0, "floppy", NULL);
}
static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index 9cd5fc8..f77c708 100644
--- a/arch/powerpc/include/asm/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -316,7 +316,7 @@
LV1_CALL(gpu_context_iomap, 5, 0, 221 )
LV1_CALL(gpu_context_attribute, 6, 0, 225 )
LV1_CALL(gpu_context_intr, 1, 1, 227 )
-LV1_CALL(gpu_attribute, 5, 0, 228 )
+LV1_CALL(gpu_attribute, 3, 0, 228 )
LV1_CALL(get_rtc, 0, 2, 232 )
LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 )
LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 )
diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h
index bd6c401..c48de98 100644
--- a/arch/powerpc/include/asm/xics.h
+++ b/arch/powerpc/include/asm/xics.h
@@ -15,8 +15,8 @@
#define DEFAULT_PRIORITY 5
/*
- * Mark IPIs as higher priority so we can take them inside interrupts that
- * arent marked IRQF_DISABLED
+ * Mark IPIs as higher priority so we can take them inside interrupts
+ * FIXME: still true now?
*/
#define IPI_PRIORITY 4
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index a54d92f..cf9c69b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -267,7 +267,7 @@
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
#endif /* CONFIG_CBE_RAS */
STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
@@ -275,7 +275,7 @@
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
#endif /* CONFIG_CBE_RAS */
STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
@@ -283,7 +283,7 @@
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
#endif /* CONFIG_CBE_RAS */
. = 0x3000
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 25ddbfc..6df7090 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -187,7 +187,7 @@
return 1;
}
#endif
- err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU,
+ err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU,
smp_ipi_name[msg], 0);
WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
virq, smp_ipi_name[msg], err);
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index f422231..44d8829 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1263,7 +1263,7 @@
addi r6,r5,VCORE_NAPPING_THREADS
31: lwarx r4,0,r6
or r4,r4,r0
- popcntw r7,r4
+ PPC_POPCNTW(r7,r4)
cmpw r7,r8
bge 2f
stwcx. r4,0,r6
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 16da595..2dd6bdd 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -34,6 +34,7 @@
#include <linux/suspend.h>
#include <linux/memblock.h>
#include <linux/hugetlb.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
@@ -555,3 +556,32 @@
book3e_hugetlb_preload(vma->vm_mm, address, *ptep);
#endif
}
+
+/*
+ * System memory should not be in /proc/iomem but various tools expect it
+ * (eg kdump).
+ */
+static int add_system_ram_resources(void)
+{
+ struct memblock_region *reg;
+
+ for_each_memblock(memory, reg) {
+ struct resource *res;
+ unsigned long base = reg->base;
+ unsigned long size = reg->size;
+
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ WARN_ON(!res);
+
+ if (res) {
+ res->name = "System RAM";
+ res->start = base;
+ res->end = base + size - 1;
+ res->flags = IORESOURCE_MEM;
+ WARN_ON(request_resource(&iomem_resource, res) < 0);
+ }
+ }
+
+ return 0;
+}
+subsys_initcall(add_system_ram_resources);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index c7dd4de..b22a83a 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -315,7 +315,10 @@
struct device_node *root;
const char *vec5;
- root = of_find_node_by_path("/rtas");
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ root = of_find_node_by_path("/ibm,opal");
+ else
+ root = of_find_node_by_path("/rtas");
if (!root)
root = of_find_node_by_path("/");
@@ -344,12 +347,19 @@
#define VEC5_AFFINITY_BYTE 5
#define VEC5_AFFINITY 0x80
- chosen = of_find_node_by_path("/chosen");
- if (chosen) {
- vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL);
- if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) {
- dbg("Using form 1 affinity\n");
- form1_affinity = 1;
+
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ form1_affinity = 1;
+ else {
+ chosen = of_find_node_by_path("/chosen");
+ if (chosen) {
+ vec5 = of_get_property(chosen,
+ "ibm,architecture-vec-5", NULL);
+ if (vec5 && (vec5[VEC5_AFFINITY_BYTE] &
+ VEC5_AFFINITY)) {
+ dbg("Using form 1 affinity\n");
+ form1_affinity = 1;
+ }
}
}
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index e36d6e2..846b789 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@
/* list of the supported boards */
static const char *board[] __initdata = {
+ "anon,charon",
"intercontrol,digsy-mtc",
"manroland,mucmc52",
"manroland,uc101",
diff --git a/arch/powerpc/platforms/cell/beat.c b/arch/powerpc/platforms/cell/beat.c
index 232fc38..852592b 100644
--- a/arch/powerpc/platforms/cell/beat.c
+++ b/arch/powerpc/platforms/cell/beat.c
@@ -230,7 +230,7 @@
}
ev->virq = virq;
- rc = request_irq(virq, ev->handler, IRQF_DISABLED,
+ rc = request_irq(virq, ev->handler, 0,
ev->typecode, NULL);
if (rc != 0) {
printk(KERN_ERR "Beat: failed to request virtual IRQ"
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index ae790ac..14be2bd 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -514,7 +514,7 @@
virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
oirq.size);
if (request_irq(virq, pciex_handle_internal_irq,
- IRQF_DISABLED, "pciex", (void *)phb)) {
+ 0, "pciex", (void *)phb)) {
pr_err("PCIEXC:Failed to request irq\n");
goto error;
}
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index fc46fca..592c3d5 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -412,8 +412,7 @@
IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
BUG_ON(virq == NO_IRQ);
- ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED,
- iommu->name, iommu);
+ ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu);
BUG_ON(ret);
/* set the IOC segment table origin register (and turn on the iommu) */
diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c
index 1acf360..59c1a16 100644
--- a/arch/powerpc/platforms/cell/pmu.c
+++ b/arch/powerpc/platforms/cell/pmu.c
@@ -392,7 +392,7 @@
}
rc = request_irq(irq, cbe_pm_irq,
- IRQF_DISABLED, "cbe-pmu-0", NULL);
+ 0, "cbe-pmu-0", NULL);
if (rc) {
printk("ERROR: Request for irq on node %d failed\n",
node);
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 3675da7..e94d3ec 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -442,8 +442,7 @@
snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
spu->number);
ret = request_irq(spu->irqs[0], spu_irq_class_0,
- IRQF_DISABLED,
- spu->irq_c0, spu);
+ 0, spu->irq_c0, spu);
if (ret)
goto bail0;
}
@@ -451,8 +450,7 @@
snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
spu->number);
ret = request_irq(spu->irqs[1], spu_irq_class_1,
- IRQF_DISABLED,
- spu->irq_c1, spu);
+ 0, spu->irq_c1, spu);
if (ret)
goto bail1;
}
@@ -460,8 +458,7 @@
snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
spu->number);
ret = request_irq(spu->irqs[2], spu_irq_class_2,
- IRQF_DISABLED,
- spu->irq_c2, spu);
+ 0, spu->irq_c2, spu);
if (ret)
goto bail2;
}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index cb40e92..901bfbd 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -272,7 +272,6 @@
static struct irqaction gatwick_cascade_action = {
.handler = gatwick_action,
- .flags = IRQF_DISABLED,
.name = "cascade",
};
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 9a521dc..9b6a820 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -200,7 +200,7 @@
if (psurge_secondary_virq)
rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
- IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+ IRQF_PERCPU, "IPI", NULL);
if (rc)
pr_err("Failed to setup secondary cpu IPI\n");
@@ -408,7 +408,7 @@
static struct irqaction psurge_irqaction = {
.handler = psurge_ipi_intr,
- .flags = IRQF_DISABLED|IRQF_PERCPU,
+ .flags = IRQF_PERCPU,
.name = "primary IPI",
};
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 6c4b583..3f175e8 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -825,7 +825,7 @@
spin_lock_init(&dev.lock);
- res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED,
+ res = request_irq(irq, ps3_notification_interrupt, 0,
"ps3_notification", &dev);
if (res) {
pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__,
diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c
index 5e304c2..ca40f6a 100644
--- a/arch/powerpc/platforms/ps3/repository.c
+++ b/arch/powerpc/platforms/ps3/repository.c
@@ -184,7 +184,7 @@
enum ps3_bus_type *bus_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
@@ -199,7 +199,7 @@
unsigned int *num_dev)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
@@ -239,7 +239,7 @@
unsigned int dev_index, enum ps3_dev_type *dev_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
@@ -256,8 +256,8 @@
enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id)
{
int result;
- u64 v1;
- u64 v2;
+ u64 v1 = 0;
+ u64 v2 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
@@ -275,7 +275,7 @@
enum ps3_reg_type *reg_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
@@ -615,7 +615,7 @@
unsigned int dev_index, unsigned int *num_regions)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
@@ -631,7 +631,7 @@
unsigned int *region_id)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
@@ -786,7 +786,7 @@
int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
@@ -805,7 +805,7 @@
int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
@@ -827,8 +827,8 @@
enum ps3_spu_resource_type *resource_type, unsigned int *resource_id)
{
int result;
- u64 v1;
- u64 v2;
+ u64 v1 = 0;
+ u64 v2 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
@@ -854,7 +854,7 @@
int ps3_repository_read_boot_dat_size(unsigned int *size)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
@@ -869,7 +869,7 @@
int ps3_repository_read_vuart_av_port(unsigned int *port)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
@@ -884,7 +884,7 @@
int ps3_repository_read_vuart_sysmgr_port(unsigned int *port)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
@@ -919,7 +919,7 @@
int ps3_repository_read_num_be(unsigned int *num_be)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("ben", 0),
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 0842c6f..8c7e852 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -800,8 +800,6 @@
* IPIs are marked IRQ_PER_CPU. This has the side effect of
* preventing the IRQ_PENDING/IRQ_INPROGRESS logic from
* applying to them. We EOI them late to avoid re-entering.
- * We mark IPI's with IRQF_DISABLED as they must run with
- * irqs disabled.
*/
mpic_eoi(mpic);
}
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
index d3d6ce3..0debcc3 100644
--- a/arch/powerpc/sysdev/ppc4xx_soc.c
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -115,7 +115,7 @@
}
/* Install error handler */
- if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+ if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
printk(KERN_ERR "Cannot install L2C error handler"
", cache is not enabled\n");
of_node_put(np);
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 3d93a8d..63762c6 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -134,11 +134,10 @@
BUG_ON(ipi == NO_IRQ);
/*
- * IPIs are marked IRQF_DISABLED as they must run with irqs
- * disabled, and PERCPU. The handler was set in map.
+ * IPIs are marked IRQF_PERCPU. The handler was set in map.
*/
BUG_ON(request_irq(ipi, icp_ops->ipi_action,
- IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL));
+ IRQF_PERCPU, "IPI", NULL));
}
int __init xics_smp_probe(void)
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index d9fb729..fb73008 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -952,7 +952,7 @@
}
result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler,
- IRQF_DISABLED, "vuart", &vuart_bus_priv);
+ 0, "vuart", &vuart_bus_priv);
if (result) {
pr_debug("%s:%d: request_irq failed (%d)\n",
diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c
index cc328de..8c3f5ad 100644
--- a/drivers/ps3/ps3stor_lib.c
+++ b/drivers/ps3/ps3stor_lib.c
@@ -167,7 +167,7 @@
goto fail_close_device;
}
- error = request_irq(dev->irq, handler, IRQF_DISABLED,
+ error = request_irq(dev->irq, handler, 0,
dev->sbd.core.driver->name, dev);
if (error) {
dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n",
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index a3ce1b2..1aa52ef 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -876,7 +876,7 @@
(0x0fUL << 12) |
(PS3_AUDIO_IOID);
- ret = lv1_gpu_attribute(0x100, 0x007, val, 0, 0);
+ ret = lv1_gpu_attribute(0x100, 0x007, val);
if (ret)
pr_info("%s: gpu_attribute failed %d\n", __func__,
ret);