mac80211: update meshconf IE
This updates the Mesh Configuration IE according to the latest
draft (3.03).
Notable changes include the simplified protocol IDs.
Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 9a73389..a49a337 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -15,14 +15,14 @@
#define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
#define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
-#define PP_OFFSET 1 /* Path Selection Protocol */
-#define PM_OFFSET 5 /* Path Selection Metric */
-#define CC_OFFSET 9 /* Congestion Control Mode */
-#define SP_OFFSET 13 /* Synchronization Protocol */
-#define AUTH_OFFSET 17 /* Authentication Protocol */
-#define CAPAB_OFFSET 22
-#define CAPAB_ACCEPT_PLINKS 0x80
-#define CAPAB_FORWARDING 0x10
+#define MESHCONF_PP_OFFSET 0 /* Path Selection Protocol */
+#define MESHCONF_PM_OFFSET 1 /* Path Selection Metric */
+#define MESHCONF_CC_OFFSET 2 /* Congestion Control Mode */
+#define MESHCONF_SP_OFFSET 3 /* Synchronization Protocol */
+#define MESHCONF_AUTH_OFFSET 4 /* Authentication Protocol */
+#define MESHCONF_CAPAB_OFFSET 6
+#define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01
+#define MESHCONF_CAPAB_FORWARDING 0x08
#define TMR_RUNNING_HK 0
#define TMR_RUNNING_MP 1
@@ -85,11 +85,12 @@
*/
if (ifmsh->mesh_id_len == ie->mesh_id_len &&
memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
- memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
- memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
- memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0 &&
- memcmp(ifmsh->mesh_sp_id, ie->mesh_config + SP_OFFSET, 4) == 0 &&
- memcmp(ifmsh->mesh_auth_id, ie->mesh_config + AUTH_OFFSET, 4) == 0)
+ (ifmsh->mesh_pp_id == *(ie->mesh_config + MESHCONF_PP_OFFSET))&&
+ (ifmsh->mesh_pm_id == *(ie->mesh_config + MESHCONF_PM_OFFSET))&&
+ (ifmsh->mesh_cc_id == *(ie->mesh_config + MESHCONF_CC_OFFSET))&&
+ (ifmsh->mesh_sp_id == *(ie->mesh_config + MESHCONF_SP_OFFSET))&&
+ (ifmsh->mesh_auth_id == *(ie->mesh_config +
+ MESHCONF_AUTH_OFFSET)))
return true;
return false;
@@ -102,7 +103,8 @@
*/
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
{
- return (*(ie->mesh_config + CAPAB_OFFSET) & CAPAB_ACCEPT_PLINKS) != 0;
+ return (*(ie->mesh_config + MESHCONF_CAPAB_OFFSET) &
+ MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
}
/**
@@ -128,18 +130,11 @@
void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
{
- u8 oui[3] = {0x00, 0x0F, 0xAC};
-
- memcpy(sta->mesh_pp_id, oui, sizeof(oui));
- memcpy(sta->mesh_pm_id, oui, sizeof(oui));
- memcpy(sta->mesh_cc_id, oui, sizeof(oui));
- memcpy(sta->mesh_sp_id, oui, sizeof(oui));
- memcpy(sta->mesh_auth_id, oui, sizeof(oui));
- sta->mesh_pp_id[sizeof(oui)] = 0;
- sta->mesh_pm_id[sizeof(oui)] = 0;
- sta->mesh_cc_id[sizeof(oui)] = 0xff;
- sta->mesh_sp_id[sizeof(oui)] = 0xff;
- sta->mesh_auth_id[sizeof(oui)] = 0x0;
+ sta->mesh_pp_id = 0; /* HWMP */
+ sta->mesh_pm_id = 0; /* Airtime */
+ sta->mesh_cc_id = 0; /* Disabled */
+ sta->mesh_sp_id = 0; /* Neighbor Offset */
+ sta->mesh_auth_id = 0; /* Disabled */
}
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
@@ -260,28 +255,21 @@
pos = skb_put(skb, 2 + IEEE80211_MESH_CONFIG_LEN);
*pos++ = WLAN_EID_MESH_CONFIG;
*pos++ = IEEE80211_MESH_CONFIG_LEN;
- /* Version */
- *pos++ = 1;
/* Active path selection protocol ID */
- memcpy(pos, sdata->u.mesh.mesh_pp_id, 4);
- pos += 4;
+ *pos++ = sdata->u.mesh.mesh_pp_id;
/* Active path selection metric ID */
- memcpy(pos, sdata->u.mesh.mesh_pm_id, 4);
- pos += 4;
+ *pos++ = sdata->u.mesh.mesh_pm_id;
/* Congestion control mode identifier */
- memcpy(pos, sdata->u.mesh.mesh_cc_id, 4);
- pos += 4;
+ *pos++ = sdata->u.mesh.mesh_cc_id;
/* Synchronization protocol identifier */
- memcpy(pos, sdata->u.mesh.mesh_sp_id, 4);
- pos += 4;
+ *pos++ = sdata->u.mesh.mesh_sp_id;
/* Authentication Protocol identifier */
- memcpy(pos, sdata->u.mesh.mesh_auth_id, 4);
- pos += 4;
+ *pos++ = sdata->u.mesh.mesh_auth_id;
/* Mesh Formation Info */
memset(pos, 0x00, 1);
@@ -289,8 +277,9 @@
/* Mesh capability */
sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
- *pos = CAPAB_FORWARDING;
- *pos++ |= sdata->u.mesh.accepting_plinks ? CAPAB_ACCEPT_PLINKS : 0x00;
+ *pos = MESHCONF_CAPAB_FORWARDING;
+ *pos++ |= sdata->u.mesh.accepting_plinks ?
+ MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
*pos++ = 0x00;
return;