bnx2x: Clean-up
Whitespaces, empty lines, 80 columns, indentations and removing redundant
parenthesis
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index 0683e54..05d695d 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -217,14 +217,13 @@
#define X_ETH_LOCAL_RING_SIZE 13
#define FIRST_BD_IN_PKT 0
#define PARSE_BD_INDEX 1
-#define NUM_OF_ETH_BDS_IN_PAGE \
- ((PAGE_SIZE) / (STRUCT_SIZE(eth_tx_bd)/8))
+#define NUM_OF_ETH_BDS_IN_PAGE ((PAGE_SIZE)/(STRUCT_SIZE(eth_tx_bd)/8))
/* Rx ring params */
-#define U_ETH_LOCAL_BD_RING_SIZE (16)
-#define U_ETH_LOCAL_SGE_RING_SIZE (12)
-#define U_ETH_SGL_SIZE (8)
+#define U_ETH_LOCAL_BD_RING_SIZE 16
+#define U_ETH_LOCAL_SGE_RING_SIZE 12
+#define U_ETH_SGL_SIZE 8
#define U_ETH_BDS_PER_PAGE_MASK \
@@ -246,15 +245,15 @@
#define U_ETH_UNDEFINED_Q 0xFF
/* values of command IDs in the ramrod message */
-#define RAMROD_CMD_ID_ETH_PORT_SETUP (80)
-#define RAMROD_CMD_ID_ETH_CLIENT_SETUP (85)
-#define RAMROD_CMD_ID_ETH_STAT_QUERY (90)
-#define RAMROD_CMD_ID_ETH_UPDATE (100)
-#define RAMROD_CMD_ID_ETH_HALT (105)
-#define RAMROD_CMD_ID_ETH_SET_MAC (110)
-#define RAMROD_CMD_ID_ETH_CFC_DEL (115)
-#define RAMROD_CMD_ID_ETH_PORT_DEL (120)
-#define RAMROD_CMD_ID_ETH_FORWARD_SETUP (125)
+#define RAMROD_CMD_ID_ETH_PORT_SETUP 80
+#define RAMROD_CMD_ID_ETH_CLIENT_SETUP 85
+#define RAMROD_CMD_ID_ETH_STAT_QUERY 90
+#define RAMROD_CMD_ID_ETH_UPDATE 100
+#define RAMROD_CMD_ID_ETH_HALT 105
+#define RAMROD_CMD_ID_ETH_SET_MAC 110
+#define RAMROD_CMD_ID_ETH_CFC_DEL 115
+#define RAMROD_CMD_ID_ETH_PORT_DEL 120
+#define RAMROD_CMD_ID_ETH_FORWARD_SETUP 125
/* command values for set mac command */
@@ -271,8 +270,8 @@
#define ETH_MAX_RX_CLIENTS_E1H 25
/* Maximal aggregation queues supported */
-#define ETH_MAX_AGGREGATION_QUEUES_E1 (32)
-#define ETH_MAX_AGGREGATION_QUEUES_E1H (64)
+#define ETH_MAX_AGGREGATION_QUEUES_E1 32
+#define ETH_MAX_AGGREGATION_QUEUES_E1H 64
/* ETH RSS modes */
#define ETH_RSS_MODE_DISABLED 0
@@ -301,7 +300,7 @@
#define RDMA_STATE (RDMA_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET)
/* microcode fixed page page size 4K (chains and ring segments) */
-#define MC_PAGE_SIZE (4096)
+#define MC_PAGE_SIZE 4096
/* Host coalescing constants */
@@ -348,16 +347,16 @@
#define ATTENTION_ID 4
/* max number of slow path commands per port */
-#define MAX_RAMRODS_PER_PORT (8)
+#define MAX_RAMRODS_PER_PORT 8
/* values for RX ETH CQE type field */
-#define RX_ETH_CQE_TYPE_ETH_FASTPATH (0)
-#define RX_ETH_CQE_TYPE_ETH_RAMROD (1)
+#define RX_ETH_CQE_TYPE_ETH_FASTPATH 0
+#define RX_ETH_CQE_TYPE_ETH_RAMROD 1
/**** DEFINES FOR TIMERS/CLOCKS RESOLUTIONS ****/
-#define EMULATION_FREQUENCY_FACTOR (1600)
-#define FPGA_FREQUENCY_FACTOR (100)
+#define EMULATION_FREQUENCY_FACTOR 1600
+#define FPGA_FREQUENCY_FACTOR 100
#define TIMERS_TICK_SIZE_CHIP (1e-3)
#define TIMERS_TICK_SIZE_EMUL \
@@ -371,12 +370,9 @@
#define TSEMI_CLK1_RESUL_FPGA \
((TSEMI_CLK1_RESUL_CHIP)/(FPGA_FREQUENCY_FACTOR))
-#define USEMI_CLK1_RESUL_CHIP \
- (TIMERS_TICK_SIZE_CHIP)
-#define USEMI_CLK1_RESUL_EMUL \
- (TIMERS_TICK_SIZE_EMUL)
-#define USEMI_CLK1_RESUL_FPGA \
- (TIMERS_TICK_SIZE_FPGA)
+#define USEMI_CLK1_RESUL_CHIP (TIMERS_TICK_SIZE_CHIP)
+#define USEMI_CLK1_RESUL_EMUL (TIMERS_TICK_SIZE_EMUL)
+#define USEMI_CLK1_RESUL_FPGA (TIMERS_TICK_SIZE_FPGA)
#define XSEMI_CLK1_RESUL_CHIP (1e-3)
#define XSEMI_CLK1_RESUL_EMUL \
@@ -401,7 +397,7 @@
#define XSTORM_IP_ID_ROLL_HALF 0x8000
#define XSTORM_IP_ID_ROLL_ALL 0
-#define FW_LOG_LIST_SIZE (50)
+#define FW_LOG_LIST_SIZE 50
#define NUM_OF_PROTOCOLS 4
#define NUM_OF_SAFC_BITS 16