| /* |
| * drivers/pci/pci-driver.c |
| * |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/mempolicy.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| #include "pci.h" |
| |
| /* |
| * Registration of PCI drivers and handling of hot-pluggable devices. |
| */ |
| |
| /* multithreaded probe logic */ |
| static int pci_multithread_probe = |
| #ifdef CONFIG_PCI_MULTITHREAD_PROBE |
| 1; |
| #else |
| 0; |
| #endif |
| __module_param_call("", pci_multithread_probe, param_set_bool, param_get_bool, &pci_multithread_probe, 0644); |
| |
| |
| /* |
| * Dynamic device IDs are disabled for !CONFIG_HOTPLUG |
| */ |
| |
| struct pci_dynid { |
| struct list_head node; |
| struct pci_device_id id; |
| }; |
| |
| #ifdef CONFIG_HOTPLUG |
| |
| /** |
| * store_new_id - add a new PCI device ID to this driver and re-probe devices |
| * @driver: target device driver |
| * @buf: buffer for scanning device ID data |
| * @count: input size |
| * |
| * Adds a new dynamic pci device ID to this driver, |
| * and causes the driver to probe for all devices again. |
| */ |
| static ssize_t |
| store_new_id(struct device_driver *driver, const char *buf, size_t count) |
| { |
| struct pci_dynid *dynid; |
| struct pci_driver *pdrv = to_pci_driver(driver); |
| __u32 vendor=PCI_ANY_ID, device=PCI_ANY_ID, subvendor=PCI_ANY_ID, |
| subdevice=PCI_ANY_ID, class=0, class_mask=0; |
| unsigned long driver_data=0; |
| int fields=0; |
| int retval = 0; |
| |
| fields = sscanf(buf, "%x %x %x %x %x %x %lux", |
| &vendor, &device, &subvendor, &subdevice, |
| &class, &class_mask, &driver_data); |
| if (fields < 0) |
| return -EINVAL; |
| |
| dynid = kzalloc(sizeof(*dynid), GFP_KERNEL); |
| if (!dynid) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&dynid->node); |
| dynid->id.vendor = vendor; |
| dynid->id.device = device; |
| dynid->id.subvendor = subvendor; |
| dynid->id.subdevice = subdevice; |
| dynid->id.class = class; |
| dynid->id.class_mask = class_mask; |
| dynid->id.driver_data = pdrv->dynids.use_driver_data ? |
| driver_data : 0UL; |
| |
| spin_lock(&pdrv->dynids.lock); |
| list_add_tail(&pdrv->dynids.list, &dynid->node); |
| spin_unlock(&pdrv->dynids.lock); |
| |
| if (get_driver(&pdrv->driver)) { |
| retval = driver_attach(&pdrv->driver); |
| put_driver(&pdrv->driver); |
| } |
| |
| if (retval) |
| return retval; |
| return count; |
| } |
| static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id); |
| |
| static void |
| pci_free_dynids(struct pci_driver *drv) |
| { |
| struct pci_dynid *dynid, *n; |
| |
| spin_lock(&drv->dynids.lock); |
| list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) { |
| list_del(&dynid->node); |
| kfree(dynid); |
| } |
| spin_unlock(&drv->dynids.lock); |
| } |
| |
| static int |
| pci_create_newid_file(struct pci_driver *drv) |
| { |
| int error = 0; |
| if (drv->probe != NULL) |
| error = sysfs_create_file(&drv->driver.kobj, |
| &driver_attr_new_id.attr); |
| return error; |
| } |
| |
| #else /* !CONFIG_HOTPLUG */ |
| static inline void pci_free_dynids(struct pci_driver *drv) {} |
| static inline int pci_create_newid_file(struct pci_driver *drv) |
| { |
| return 0; |
| } |
| #endif |
| |
| /** |
| * pci_match_id - See if a pci device matches a given pci_id table |
| * @ids: array of PCI device id structures to search in |
| * @dev: the PCI device structure to match against. |
| * |
| * Used by a driver to check whether a PCI device present in the |
| * system is in its list of supported devices. Returns the matching |
| * pci_device_id structure or %NULL if there is no match. |
| * |
| * Depreciated, don't use this as it will not catch any dynamic ids |
| * that a driver might want to check for. |
| */ |
| const struct pci_device_id *pci_match_id(const struct pci_device_id *ids, |
| struct pci_dev *dev) |
| { |
| if (ids) { |
| while (ids->vendor || ids->subvendor || ids->class_mask) { |
| if (pci_match_one_device(ids, dev)) |
| return ids; |
| ids++; |
| } |
| } |
| return NULL; |
| } |
| |
| /** |
| * pci_match_device - Tell if a PCI device structure has a matching PCI device id structure |
| * @drv: the PCI driver to match against |
| * @dev: the PCI device structure to match against |
| * |
| * Used by a driver to check whether a PCI device present in the |
| * system is in its list of supported devices. Returns the matching |
| * pci_device_id structure or %NULL if there is no match. |
| */ |
| const struct pci_device_id *pci_match_device(struct pci_driver *drv, |
| struct pci_dev *dev) |
| { |
| struct pci_dynid *dynid; |
| |
| /* Look at the dynamic ids first, before the static ones */ |
| spin_lock(&drv->dynids.lock); |
| list_for_each_entry(dynid, &drv->dynids.list, node) { |
| if (pci_match_one_device(&dynid->id, dev)) { |
| spin_unlock(&drv->dynids.lock); |
| return &dynid->id; |
| } |
| } |
| spin_unlock(&drv->dynids.lock); |
| |
| return pci_match_id(drv->id_table, dev); |
| } |
| |
| static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| int error; |
| #ifdef CONFIG_NUMA |
| /* Execute driver initialization on node where the |
| device's bus is attached to. This way the driver likely |
| allocates its local memory on the right node without |
| any need to change it. */ |
| struct mempolicy *oldpol; |
| cpumask_t oldmask = current->cpus_allowed; |
| int node = pcibus_to_node(dev->bus); |
| if (node >= 0 && node_online(node)) |
| set_cpus_allowed(current, node_to_cpumask(node)); |
| /* And set default memory allocation policy */ |
| oldpol = current->mempolicy; |
| current->mempolicy = &default_policy; |
| mpol_get(current->mempolicy); |
| #endif |
| error = drv->probe(dev, id); |
| #ifdef CONFIG_NUMA |
| set_cpus_allowed(current, oldmask); |
| mpol_free(current->mempolicy); |
| current->mempolicy = oldpol; |
| #endif |
| return error; |
| } |
| |
| /** |
| * __pci_device_probe() |
| * @drv: driver to call to check if it wants the PCI device |
| * @pci_dev: PCI device being probed |
| * |
| * returns 0 on success, else error. |
| * side-effect: pci_dev->driver is set to drv when drv claims pci_dev. |
| */ |
| static int |
| __pci_device_probe(struct pci_driver *drv, struct pci_dev *pci_dev) |
| { |
| const struct pci_device_id *id; |
| int error = 0; |
| |
| if (!pci_dev->driver && drv->probe) { |
| error = -ENODEV; |
| |
| id = pci_match_device(drv, pci_dev); |
| if (id) |
| error = pci_call_probe(drv, pci_dev, id); |
| if (error >= 0) { |
| pci_dev->driver = drv; |
| error = 0; |
| } |
| } |
| return error; |
| } |
| |
| static int pci_device_probe(struct device * dev) |
| { |
| int error = 0; |
| struct pci_driver *drv; |
| struct pci_dev *pci_dev; |
| |
| drv = to_pci_driver(dev->driver); |
| pci_dev = to_pci_dev(dev); |
| pci_dev_get(pci_dev); |
| error = __pci_device_probe(drv, pci_dev); |
| if (error) |
| pci_dev_put(pci_dev); |
| |
| return error; |
| } |
| |
| static int pci_device_remove(struct device * dev) |
| { |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| |
| if (drv) { |
| if (drv->remove) |
| drv->remove(pci_dev); |
| pci_dev->driver = NULL; |
| } |
| |
| /* |
| * If the device is still on, set the power state as "unknown", |
| * since it might change by the next time we load the driver. |
| */ |
| if (pci_dev->current_state == PCI_D0) |
| pci_dev->current_state = PCI_UNKNOWN; |
| |
| /* |
| * We would love to complain here if pci_dev->is_enabled is set, that |
| * the driver should have called pci_disable_device(), but the |
| * unfortunate fact is there are too many odd BIOS and bridge setups |
| * that don't like drivers doing that all of the time. |
| * Oh well, we can dream of sane hardware when we sleep, no matter how |
| * horrible the crap we have to deal with is when we are awake... |
| */ |
| |
| pci_dev_put(pci_dev); |
| return 0; |
| } |
| |
| static int pci_device_suspend(struct device * dev, pm_message_t state) |
| { |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| int i = 0; |
| |
| if (drv && drv->suspend) { |
| i = drv->suspend(pci_dev, state); |
| suspend_report_result(drv->suspend, i); |
| } else { |
| pci_save_state(pci_dev); |
| /* |
| * mark its power state as "unknown", since we don't know if |
| * e.g. the BIOS will change its device state when we suspend. |
| */ |
| if (pci_dev->current_state == PCI_D0) |
| pci_dev->current_state = PCI_UNKNOWN; |
| } |
| return i; |
| } |
| |
| static int pci_device_suspend_late(struct device * dev, pm_message_t state) |
| { |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| int i = 0; |
| |
| if (drv && drv->suspend_late) { |
| i = drv->suspend_late(pci_dev, state); |
| suspend_report_result(drv->suspend_late, i); |
| } |
| return i; |
| } |
| |
| /* |
| * Default resume method for devices that have no driver provided resume, |
| * or not even a driver at all. |
| */ |
| static int pci_default_resume(struct pci_dev *pci_dev) |
| { |
| int retval = 0; |
| |
| /* restore the PCI config space */ |
| pci_restore_state(pci_dev); |
| /* if the device was enabled before suspend, reenable */ |
| retval = __pci_reenable_device(pci_dev); |
| /* if the device was busmaster before the suspend, make it busmaster again */ |
| if (pci_dev->is_busmaster) |
| pci_set_master(pci_dev); |
| |
| return retval; |
| } |
| |
| static int pci_device_resume(struct device * dev) |
| { |
| int error; |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| |
| if (drv && drv->resume) |
| error = drv->resume(pci_dev); |
| else |
| error = pci_default_resume(pci_dev); |
| return error; |
| } |
| |
| static int pci_device_resume_early(struct device * dev) |
| { |
| int error = 0; |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| |
| pci_fixup_device(pci_fixup_resume, pci_dev); |
| |
| if (drv && drv->resume_early) |
| error = drv->resume_early(pci_dev); |
| return error; |
| } |
| |
| static void pci_device_shutdown(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct pci_driver *drv = pci_dev->driver; |
| |
| if (drv && drv->shutdown) |
| drv->shutdown(pci_dev); |
| } |
| |
| #define kobj_to_pci_driver(obj) container_of(obj, struct device_driver, kobj) |
| #define attr_to_driver_attribute(obj) container_of(obj, struct driver_attribute, attr) |
| |
| static ssize_t |
| pci_driver_attr_show(struct kobject * kobj, struct attribute *attr, char *buf) |
| { |
| struct device_driver *driver = kobj_to_pci_driver(kobj); |
| struct driver_attribute *dattr = attr_to_driver_attribute(attr); |
| ssize_t ret; |
| |
| if (!get_driver(driver)) |
| return -ENODEV; |
| |
| ret = dattr->show ? dattr->show(driver, buf) : -EIO; |
| |
| put_driver(driver); |
| return ret; |
| } |
| |
| static ssize_t |
| pci_driver_attr_store(struct kobject * kobj, struct attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct device_driver *driver = kobj_to_pci_driver(kobj); |
| struct driver_attribute *dattr = attr_to_driver_attribute(attr); |
| ssize_t ret; |
| |
| if (!get_driver(driver)) |
| return -ENODEV; |
| |
| ret = dattr->store ? dattr->store(driver, buf, count) : -EIO; |
| |
| put_driver(driver); |
| return ret; |
| } |
| |
| static struct sysfs_ops pci_driver_sysfs_ops = { |
| .show = pci_driver_attr_show, |
| .store = pci_driver_attr_store, |
| }; |
| static struct kobj_type pci_driver_kobj_type = { |
| .sysfs_ops = &pci_driver_sysfs_ops, |
| }; |
| |
| /** |
| * __pci_register_driver - register a new pci driver |
| * @drv: the driver structure to register |
| * @owner: owner module of drv |
| * @mod_name: module name string |
| * |
| * Adds the driver structure to the list of registered drivers. |
| * Returns a negative value on error, otherwise 0. |
| * If no error occurred, the driver remains registered even if |
| * no device was claimed during registration. |
| */ |
| int __pci_register_driver(struct pci_driver *drv, struct module *owner, |
| const char *mod_name) |
| { |
| int error; |
| |
| /* initialize common driver fields */ |
| drv->driver.name = drv->name; |
| drv->driver.bus = &pci_bus_type; |
| drv->driver.owner = owner; |
| drv->driver.mod_name = mod_name; |
| drv->driver.kobj.ktype = &pci_driver_kobj_type; |
| |
| if (pci_multithread_probe) |
| drv->driver.multithread_probe = pci_multithread_probe; |
| else |
| drv->driver.multithread_probe = drv->multithread_probe; |
| |
| spin_lock_init(&drv->dynids.lock); |
| INIT_LIST_HEAD(&drv->dynids.list); |
| |
| /* register with core */ |
| error = driver_register(&drv->driver); |
| if (error) |
| return error; |
| |
| error = pci_create_newid_file(drv); |
| if (error) |
| driver_unregister(&drv->driver); |
| |
| return error; |
| } |
| |
| /** |
| * pci_unregister_driver - unregister a pci driver |
| * @drv: the driver structure to unregister |
| * |
| * Deletes the driver structure from the list of registered PCI drivers, |
| * gives it a chance to clean up by calling its remove() function for |
| * each device it was responsible for, and marks those devices as |
| * driverless. |
| */ |
| |
| void |
| pci_unregister_driver(struct pci_driver *drv) |
| { |
| driver_unregister(&drv->driver); |
| pci_free_dynids(drv); |
| } |
| |
| static struct pci_driver pci_compat_driver = { |
| .name = "compat" |
| }; |
| |
| /** |
| * pci_dev_driver - get the pci_driver of a device |
| * @dev: the device to query |
| * |
| * Returns the appropriate pci_driver structure or %NULL if there is no |
| * registered driver for the device. |
| */ |
| struct pci_driver * |
| pci_dev_driver(const struct pci_dev *dev) |
| { |
| if (dev->driver) |
| return dev->driver; |
| else { |
| int i; |
| for(i=0; i<=PCI_ROM_RESOURCE; i++) |
| if (dev->resource[i].flags & IORESOURCE_BUSY) |
| return &pci_compat_driver; |
| } |
| return NULL; |
| } |
| |
| /** |
| * pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure |
| * @dev: the PCI device structure to match against |
| * @drv: the device driver to search for matching PCI device id structures |
| * |
| * Used by a driver to check whether a PCI device present in the |
| * system is in its list of supported devices. Returns the matching |
| * pci_device_id structure or %NULL if there is no match. |
| */ |
| static int pci_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct pci_driver *pci_drv = to_pci_driver(drv); |
| const struct pci_device_id *found_id; |
| |
| found_id = pci_match_device(pci_drv, pci_dev); |
| if (found_id) |
| return 1; |
| |
| return 0; |
| } |
| |
| /** |
| * pci_dev_get - increments the reference count of the pci device structure |
| * @dev: the device being referenced |
| * |
| * Each live reference to a device should be refcounted. |
| * |
| * Drivers for PCI devices should normally record such references in |
| * their probe() methods, when they bind to a device, and release |
| * them by calling pci_dev_put(), in their disconnect() methods. |
| * |
| * A pointer to the device with the incremented reference counter is returned. |
| */ |
| struct pci_dev *pci_dev_get(struct pci_dev *dev) |
| { |
| if (dev) |
| get_device(&dev->dev); |
| return dev; |
| } |
| |
| /** |
| * pci_dev_put - release a use of the pci device structure |
| * @dev: device that's been disconnected |
| * |
| * Must be called when a user of a device is finished with it. When the last |
| * user of the device calls this function, the memory of the device is freed. |
| */ |
| void pci_dev_put(struct pci_dev *dev) |
| { |
| if (dev) |
| put_device(&dev->dev); |
| } |
| |
| #ifndef CONFIG_HOTPLUG |
| int pci_uevent(struct device *dev, char **envp, int num_envp, |
| char *buffer, int buffer_size) |
| { |
| return -ENODEV; |
| } |
| #endif |
| |
| struct bus_type pci_bus_type = { |
| .name = "pci", |
| .match = pci_bus_match, |
| .uevent = pci_uevent, |
| .probe = pci_device_probe, |
| .remove = pci_device_remove, |
| .suspend = pci_device_suspend, |
| .suspend_late = pci_device_suspend_late, |
| .resume_early = pci_device_resume_early, |
| .resume = pci_device_resume, |
| .shutdown = pci_device_shutdown, |
| .dev_attrs = pci_dev_attrs, |
| }; |
| |
| static int __init pci_driver_init(void) |
| { |
| return bus_register(&pci_bus_type); |
| } |
| |
| postcore_initcall(pci_driver_init); |
| |
| EXPORT_SYMBOL(pci_match_id); |
| EXPORT_SYMBOL(pci_match_device); |
| EXPORT_SYMBOL(__pci_register_driver); |
| EXPORT_SYMBOL(pci_unregister_driver); |
| EXPORT_SYMBOL(pci_dev_driver); |
| EXPORT_SYMBOL(pci_bus_type); |
| EXPORT_SYMBOL(pci_dev_get); |
| EXPORT_SYMBOL(pci_dev_put); |