/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

&spmi_bus {
	#address-cells = <1>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <3>;
};

&pm8941_lsid0 {
	spmi-slave-container;
	#address-cells = <1>;
	#size-cells = <1>;

	pm8941_misc: qcom,misc@900 {
		compatible = "qcom,qpnp-misc";
		reg = <0x900 0x100>;
	};

	pm8941_revid: qcom,revid@100 {
		compatible = "qcom,qpnp-revid";
		reg = <0x100 0x100>;
	};

	qcom,temp-alarm@2400 {
		compatible = "qcom,qpnp-temp-alarm";
		reg = <0x2400 0x100>;
		interrupts = <0x0 0x24 0x0>;
		label = "pm8941_tz";
		qcom,channel-num = <8>;
		qcom,threshold-set = <0>;
		qcom,temp_alarm-vadc = <&pm8941_vadc>;
	};

	qcom,power-on@800 {
		compatible = "qcom,qpnp-power-on";
		reg = <0x800 0x100>;
		interrupts = <0x0 0x8 0x0>,
			     <0x0 0x8 0x1>,
			     <0x0 0x8 0x4>,
			     <0x0 0x8 0x5>;
		interrupt-names = "kpdpwr", "resin",
				"resin-bark", "kpdpwr-resin-bark";
		qcom,pon-dbc-delay = <15625>;
		qcom,system-reset;
		qcom,s3-debounce = <32>;

		qcom,pon_1 {
			qcom,pon-type = <0>;
			qcom,pull-up = <1>;
			linux,code = <116>;
		};

		qcom,pon_2 {
			qcom,pon-type = <1>;
			qcom,support-reset = <1>;
			qcom,pull-up = <1>;
			qcom,s1-timer = <0>;
			qcom,s2-timer = <2000>;
			qcom,s2-type = <1>;
			linux,code = <114>;
			qcom,use-bark;
		};

		qcom,pon_3 {
			qcom,pon-type = <3>;
			qcom,support-reset = <1>;
			qcom,s1-timer = <6720>;
			qcom,s2-timer = <2000>;
			qcom,s2-type = <7>;
			qcom,pull-up = <1>;
			qcom,use-bark;
		};
	};

	bif_ctrl: qcom,bsi@1b00 {
		compatible = "qcom,qpnp-bsi";
		reg = <0x1b00 0x100>,
		      <0x1208 0x1>;
		reg-names = "bsi-base", "batt-id-status";
		label = "pm8941-bsi";
		interrupts = <0x0 0x1b 0x0>,
			     <0x0 0x1b 0x1>,
			     <0x0 0x1b 0x2>,
			     <0x0 0x12 0x0>;
		interrupt-names = "err",
				  "rx",
				  "tx",
				  "batt-present";
		qcom,channel-num = <0x31>;
		qcom,pullup-ohms = <100000>;
		qcom,vref-microvolts = <1800000>;
		qcom,min-clock-period = <1000>;
		qcom,max-clock-period = <160000>;
		qcom,sample-rate = <4>;
		qcom,bsi-vadc = <&pm8941_vadc>;
	};

	pm8941_coincell: qcom,coincell@2800 {
		compatible = "qcom,qpnp-coincell";
		reg = <0x2800 0x100>;
	};

	pm8941_bms: qcom,bms {
		spmi-dev-container;
		compatible = "qcom,qpnp-bms";
		#address-cells = <1>;
		#size-cells = <1>;
		status = "disabled";

		qcom,r-sense-uohm = <10000>;
		qcom,v-cutoff-uv = <3400000>;
		qcom,max-voltage-uv = <4200000>;
		qcom,r-conn-mohm = <0>;
		qcom,shutdown-soc-valid-limit = <100>;
		qcom,adjust-soc-low-threshold = <15>;
		qcom,ocv-voltage-high-threshold-uv = <3750000>;
		qcom,ocv-voltage-low-threshold-uv = <3650000>;
		qcom,low-soc-calculate-soc-threshold = <15>;
		qcom,low-voltage-calculate-soc-ms = <1000>;
		qcom,low-soc-calculate-soc-ms = <5000>;
		qcom,calculate-soc-ms = <20000>;
		qcom,chg-term-ua = <100000>;
		qcom,batt-type = <0>;
		qcom,low-voltage-threshold = <3420000>;
		qcom,tm-temp-margin = <5000>;
		qcom,low-ocv-correction-limit-uv = <100>;
		qcom,high-ocv-correction-limit-uv = <250>;
		qcom,hold-soc-est = <3>;
		qcom,bms-vadc = <&pm8941_vadc>;
		qcom,bms-iadc = <&pm8941_iadc>;
		qcom,bms-adc_tm = <&pm8941_adc_tm>;

		qcom,bms-iadc@3800 {
			reg = <0x3800 0x100>;
		};

		qcom,bms-bms@4000 {
			reg = <0x4000 0x100>;
			interrupts =	<0x0 0x40 0x0>,
					<0x0 0x40 0x1>,
					<0x0 0x40 0x2>,
					<0x0 0x40 0x3>,
					<0x0 0x40 0x4>,
					<0x0 0x40 0x5>,
					<0x0 0x40 0x6>,
					<0x0 0x40 0x7>;

			interrupt-names = "cc_thr",
					  "ocv_for_r",
					  "good_ocv",
					  "charge_begin",
					  "ocv_thr",
					  "sw_cc_thr",
					  "vsense_avg",
					  "vsense_for_r";
		};
	};

	clkdiv@5b00 {
		reg = <0x5b00 0x100>;
		compatible = "qcom,qpnp-clkdiv";
		qcom,cxo-freq = <19200000>;
	};

	clkdiv@5c00 {
		reg = <0x5c00 0x100>;
		compatible = "qcom,qpnp-clkdiv";
		qcom,cxo-freq = <19200000>;
	};

	clkdiv@5d00 {
		reg = <0x5d00 0x1000>;
		compatible = "qcom,qpnp-clkdiv";
		qcom,cxo-freq = <19200000>;
	};

	pm8941_chg: qcom,charger {
		spmi-dev-container;
		compatible = "qcom,qpnp-charger";
		#address-cells = <1>;
		#size-cells = <1>;
		status = "disabled";

		qcom,vddmax-mv = <4200>;
		qcom,vddsafe-mv = <4230>;
		qcom,vinmin-mv = <4300>;
		qcom,ibatmax-ma = <1500>;
		qcom,ibatterm-ma = <100>;
		qcom,ibatsafe-ma = <1500>;
		qcom,thermal-mitigation = <1500 700 600 325>;
		qcom,cool-bat-decidegc = <100>;
		qcom,cool-bat-mv = <4100>;
		qcom,ibatmax-warm-ma = <350>;
		qcom,warm-bat-decidegc = <450>;
		qcom,warm-bat-mv = <4100>;
		qcom,ibatmax-cool-ma = <350>;
		qcom,vbatdet-delta-mv = <100>;
		qcom,resume-soc = <99>;
		qcom,tchg-mins = <150>;
		qcom,chg-vadc = <&pm8941_vadc>;
		qcom,chg-iadc = <&pm8941_iadc>;
		qcom,chg-adc_tm = <&pm8941_adc_tm>;
		qcom,ibat-calibration-enabled;

		qcom,chgr@1000 {
			status = "disabled";
			reg = <0x1000 0x100>;
			interrupts =	<0x0 0x10 0x0>,
					<0x0 0x10 0x1>,
					<0x0 0x10 0x2>,
					<0x0 0x10 0x3>,
					<0x0 0x10 0x4>,
					<0x0 0x10 0x5>,
					<0x0 0x10 0x6>,
					<0x0 0x10 0x7>;

			interrupt-names =	"vbat-det-lo",
						"vbat-det-hi",
						"chgwdog",
						"state-change",
						"trkl-chg-on",
						"fast-chg-on",
						"chg-failed",
						"chg-done";
		};

		qcom,buck@1100 {
			status = "disabled";
			reg = <0x1100 0x100>;
			interrupts =	<0x0 0x11 0x0>,
					<0x0 0x11 0x1>,
					<0x0 0x11 0x2>,
					<0x0 0x11 0x3>,
					<0x0 0x11 0x4>,
					<0x0 0x11 0x5>,
					<0x0 0x11 0x6>;

			interrupt-names =	"vbat-ov",
						"vreg-ov",
						"overtemp",
						"vchg-loop",
						"ichg-loop",
						"ibat-loop",
						"vdd-loop";
		};

		pm8941_chg_batif: qcom,bat-if@1200 {
			status = "disabled";
			reg = <0x1200 0x100>;
			interrupts =	<0x0 0x12 0x0>,
					<0x0 0x12 0x1>,
					<0x0 0x12 0x2>,
					<0x0 0x12 0x3>,
					<0x0 0x12 0x4>;

			interrupt-names =	"batt-pres",
						"bat-temp-ok",
						"bat-fet-on",
						"vcp-on",
						"psi";

		};

		pm8941_chg_otg: qcom,usb-chgpth@1300 {
			status = "disabled";
			reg = <0x1300 0x100>;
			interrupts =	<0 0x13 0x0>,
					<0 0x13 0x1>,
					<0x0 0x13 0x2>;

			interrupt-names =	"coarse-det-usb",
						"usbin-valid",
						"chg-gone";
		};

		qcom,dc-chgpth@1400 {
			status = "disabled";
			reg = <0x1400 0x100>;
			interrupts =	<0x0 0x14 0x0>,
					<0x0 0x14 0x1>;

			interrupt-names =	"coarse-det-dc",
						"dcin-valid";
		};

		pm8941_chg_boost: qcom,boost@1500 {
			status = "disabled";
			reg = <0x1500 0x100>;
			interrupts =	<0x0 0x15 0x0>,
					<0x0 0x15 0x1>;

			interrupt-names =	"boost-pwr-ok",
						"limit-error";
		};

		qcom,chg-misc@1600 {
			status = "disabled";
			reg = <0x1600 0x100>;
		};
	};

	pm8941_gpios: gpios {
		spmi-dev-container;
		compatible = "qcom,qpnp-pin";
		gpio-controller;
		#gpio-cells = <2>;
		#address-cells = <1>;
		#size-cells = <1>;
		label = "pm8941-gpio";

		gpio@c000 {
			reg = <0xc000 0x100>;
			qcom,pin-num = <1>;
		};

		gpio@c100 {
			reg = <0xc100 0x100>;
			qcom,pin-num = <2>;
		};

		gpio@c200 {
			reg = <0xc200 0x100>;
			qcom,pin-num = <3>;
		};

		gpio@c300 {
			reg = <0xc300 0x100>;
			qcom,pin-num = <4>;
		};

		gpio@c400 {
			reg = <0xc400 0x100>;
			qcom,pin-num = <5>;
		};

		gpio@c500 {
			reg = <0xc500 0x100>;
			qcom,pin-num = <6>;
		};

		gpio@c600 {
			reg = <0xc600 0x100>;
			qcom,pin-num = <7>;
		};

		gpio@c700 {
			reg = <0xc700 0x100>;
			qcom,pin-num = <8>;
		};

		gpio@c800 {
			reg = <0xc800 0x100>;
			qcom,pin-num = <9>;
		};

		gpio@c900 {
			reg = <0xc900 0x100>;
			qcom,pin-num = <10>;
		};

		gpio@ca00 {
			reg = <0xca00 0x100>;
			qcom,pin-num = <11>;
		};

		gpio@cb00 {
			reg = <0xcb00 0x100>;
			qcom,pin-num = <12>;
		};

		gpio@cc00 {
			reg = <0xcc00 0x100>;
			qcom,pin-num = <13>;
		};

		gpio@cd00 {
			reg = <0xcd00 0x100>;
			qcom,pin-num = <14>;
		};

		gpio@ce00 {
			reg = <0xce00 0x100>;
			qcom,pin-num = <15>;
		};

		gpio@cf00 {
			reg = <0xcf00 0x100>;
			qcom,pin-num = <16>;
		};

		gpio@d000 {
			reg = <0xd000 0x100>;
			qcom,pin-num = <17>;
		};

		gpio@d100 {
			reg = <0xd100 0x100>;
			qcom,pin-num = <18>;
		};

		gpio@d200 {
			reg = <0xd200 0x100>;
			qcom,pin-num = <19>;
		};

		gpio@d300 {
			reg = <0xd300 0x100>;
			qcom,pin-num = <20>;
		};

		gpio@d400 {
			reg = <0xd400 0x100>;
			qcom,pin-num = <21>;
		};

		gpio@d500 {
			reg = <0xd500 0x100>;
			qcom,pin-num = <22>;
		};

		gpio@d600 {
			reg = <0xd600 0x100>;
			qcom,pin-num = <23>;
		};

		gpio@d700 {
			reg = <0xd700 0x100>;
			qcom,pin-num = <24>;
		};

		gpio@d800 {
			reg = <0xd800 0x100>;
			qcom,pin-num = <25>;
		};

		gpio@d900 {
			reg = <0xd900 0x100>;
			qcom,pin-num = <26>;
		};

		gpio@da00 {
			reg = <0xda00 0x100>;
			qcom,pin-num = <27>;
		};

		gpio@db00 {
			reg = <0xdb00 0x100>;
			qcom,pin-num = <28>;
		};

		gpio@dc00 {
			reg = <0xdc00 0x100>;
			qcom,pin-num = <29>;
		};

		gpio@dd00 {
			reg = <0xdd00 0x100>;
			qcom,pin-num = <30>;
		};

		gpio@de00 {
			reg = <0xde00 0x100>;
			qcom,pin-num = <31>;
		};

		gpio@df00 {
			reg = <0xdf00 0x100>;
			qcom,pin-num = <32>;
		};

		gpio@e000 {
			reg = <0xe000 0x100>;
			qcom,pin-num = <33>;
		};

		gpio@e100 {
			reg = <0xe100 0x100>;
			qcom,pin-num = <34>;
		};

		gpio@e200 {
			reg = <0xe200 0x100>;
			qcom,pin-num = <35>;
		};

		gpio@e300 {
			reg = <0xe300 0x100>;
			qcom,pin-num = <36>;
		};
	};

	pm8941_mpps: mpps {
		spmi-dev-container;
		compatible = "qcom,qpnp-pin";
		gpio-controller;
		#gpio-cells = <2>;
		#address-cells = <1>;
		#size-cells = <1>;
		label = "pm8941-mpp";

		mpp@a000 {
			reg = <0xa000 0x100>;
			qcom,pin-num = <1>;
		};

		mpp@a100 {
			reg = <0xa100 0x100>;
			qcom,pin-num = <2>;
		};

		mpp@a200 {
			reg = <0xa200 0x100>;
			qcom,pin-num = <3>;
		};

		mpp@a300 {
			reg = <0xa300 0x100>;
			qcom,pin-num = <4>;
		};

		mpp@a400 {
			reg = <0xa400 0x100>;
			qcom,pin-num = <5>;
		};

		mpp@a500 {
			reg = <0xa500 0x100>;
			qcom,pin-num = <6>;
		};

		mpp@a600 {
			reg = <0xa600 0x100>;
			qcom,pin-num = <7>;
		};

		mpp@a700 {
			reg = <0xa700 0x100>;
			qcom,pin-num = <8>;
		};
	};

	qcom,pm8941_rtc {
		spmi-dev-container;
		compatible = "qcom,qpnp-rtc";
		#address-cells = <1>;
		#size-cells = <1>;
		qcom,qpnp-rtc-write = <0>;
		qcom,qpnp-rtc-alarm-pwrup = <0>;

		qcom,pm8941_rtc_rw@6000 {
			reg = <0x6000 0x100>;
		};
		qcom,pm8941_rtc_alarm@6100 {
			reg = <0x6100 0x100>;
			interrupts = <0x0 0x61 0x1>;
		};
	};

	pm8941_vadc: vadc@3100 {
		compatible = "qcom,qpnp-vadc";
		reg = <0x3100 0x100>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <0x0 0x31 0x0>;
		interrupt-names = "eoc-int-en-set";
		qcom,adc-bit-resolution = <15>;
		qcom,adc-vdd-reference = <1800>;
		qcom,vadc-poll-eoc;
		qcom,pmic-revid = <&pm8941_revid>;

		chan@0 {
			label = "usb_in";
			reg = <0>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <4>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@1 {
			label = "dc_in";
			reg = <1>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <4>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@2 {
			label = "vchg_sns";
			reg = <2>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <3>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@3 {
			label = "spare1_div3";
			reg = <3>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <1>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@4 {
			label = "usb_id_mv";
			reg = <4>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <1>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@5 {
			label = "vcoin";
			reg = <5>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <1>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@6 {
			label = "vbat_sns";
			reg = <6>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <1>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@7 {
			label = "vph_pwr";
			reg = <7>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <1>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@8 {
			label = "die_temp";
			reg = <8>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <3>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@9 {
			label = "ref_625mv";
			reg = <9>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@a {
			label = "ref_1250v";
			reg = <0xa>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};

		chan@30 {
			label = "batt_therm";
			reg = <0x30>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <1>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@31 {
			label = "batt_id";
			reg = <0x31>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@b2 {
			label = "xo_therm_pu2";
			reg = <0xb2>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <4>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@b3 {
			label = "msm_therm";
			reg = <0xb3>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@b4 {
			label = "emmc_therm";
			reg = <0xb4>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@b5 {
			label = "pa_therm0";
			reg = <0xb5>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@b7 {
			label = "pa_therm1";
			reg = <0xb7>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@b8 {
			label = "quiet_therm";
			reg = <0xb8>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@b9 {
			label = "usb_id";
			reg = <0xb9>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};

		chan@39 {
			label = "usb_id_nopull";
			reg = <0x39>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <0>;
		};
	};

	pm8941_iadc: iadc@3600 {
		compatible = "qcom,qpnp-iadc";
		reg = <0x3600 0x100>,
		      <0x12f1 0x1>;
		reg-names = "iadc-base", "batt-id-trim-cnst-rds";
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <0x0 0x36 0x0>;
		interrupt-names = "eoc-int-en-set";
		qcom,adc-bit-resolution = <16>;
		qcom,adc-vdd-reference = <1800>;
		qcom,iadc-vadc = <&pm8941_vadc>;
		qcom,iadc-poll-eoc;
		qcom,use-default-rds-trim = <0>;
		qcom,pmic-revid = <&pm8941_revid>;

		chan@0 {
			label = "internal_rsense";
			reg = <0>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <1>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <0>;
		};
	};

	pm8941_adc_tm: qcom,vadc@3400 {
		compatible = "qcom,qpnp-adc-tm";
		reg = <0x3400 0x100>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts =	<0x0 0x34 0x0>,
				<0x0 0x34 0x3>,
			     <0x0 0x34 0x4>;
		interrupt-names =	"eoc-int-en-set",
					"high-thr-en-set",
					"low-thr-en-set";
		qcom,adc-bit-resolution = <15>;
		qcom,adc-vdd-reference = <1800>;
		qcom,adc_tm-vadc = <&pm8941_vadc>;

		/* Channel Node */
		chan@b9 {
			label = "usb_id";
			reg = <0xb9>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <3>;
			qcom,btm-channel-number = <0x48>;
		};

		chan@30 {
			label = "batt_therm";
			reg = <0x30>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <1>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <3>;
			qcom,btm-channel-number = <0x68>;
			qcom,meas-interval-timer-idx = <2>;
		};

		chan@8 {
			label = "die_temp";
			reg = <8>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <3>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <3>;
			qcom,btm-channel-number = <0x70>;
		};

		chan@6 {
			label = "vbat_sns";
			reg = <6>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <1>;
			qcom,calibration-type = "absolute";
			qcom,scale-function = <0>;
			qcom,hw-settle-time = <0>;
			qcom,fast-avg-setup = <3>;
			qcom,btm-channel-number = <0x78>;
		};

		chan@b5 {
			label = "pa_therm0";
			reg = <0xb5>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <3>;
			qcom,btm-channel-number = <0x80>;
			qcom,thermal-node;
		};

		chan@b7 {
			label = "pa_therm1";
			reg = <0xb7>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <3>;
			qcom,btm-channel-number = <0x88>;
			qcom,thermal-node;
		};

		chan@b4 {
			label = "emmc_therm";
			reg = <0xb4>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <3>;
			qcom,btm-channel-number = <0x90>;
			qcom,thermal-node;
		};

		chan@b3 {
			label = "msm_therm";
			reg = <0xb3>;
			qcom,decimation = <0>;
			qcom,pre-div-channel-scaling = <0>;
			qcom,calibration-type = "ratiometric";
			qcom,scale-function = <2>;
			qcom,hw-settle-time = <2>;
			qcom,fast-avg-setup = <3>;
			qcom,btm-channel-number = <0x98>;
			qcom,thermal-node;
		};
	};
};

&pm8941_lsid1 {
	spmi-slave-container;
	#address-cells = <1>;
	#size-cells = <1>;

	regulator@1400 {
		regulator-name = "8941_s1";
		spmi-dev-container;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "qcom,qpnp-regulator";
		reg = <0x1400 0x300>;
		status = "disabled";

		qcom,ctl@1400 {
			reg = <0x1400 0x100>;
		};
		qcom,ps@1500 {
			reg = <0x1500 0x100>;
		};
		qcom,freq@1600 {
			reg = <0x1600 0x100>;
		};
	};

	regulator@1700 {
		regulator-name = "8941_s2";
		spmi-dev-container;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "qcom,qpnp-regulator";
		reg = <0x1700 0x300>;
		status = "disabled";

		qcom,ctl@1700 {
			reg = <0x1700 0x100>;
		};
		qcom,ps@1800 {
			reg = <0x1800 0x100>;
		};
		qcom,freq@1900 {
			reg = <0x1900 0x100>;
		};
	};

	regulator@1a00 {
		regulator-name = "8941_s3";
		spmi-dev-container;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "qcom,qpnp-regulator";
		reg = <0x1a00 0x300>;
		status = "disabled";

		qcom,ctl@1a00 {
			reg = <0x1a00 0x100>;
		};
		qcom,ps@1b00 {
			reg = <0x1b00 0x100>;
		};
		qcom,freq@1c00 {
			reg = <0x1c00 0x100>;
		};
	};

	regulator@a000 {
		regulator-name = "8941_boost";
		reg = <0xa000 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4000 {
		regulator-name = "8941_l1";
		reg = <0x4000 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4100 {
		regulator-name = "8941_l2";
		reg = <0x4100 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4200 {
		regulator-name = "8941_l3";
		reg = <0x4200 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4300 {
		regulator-name = "8941_l4";
		reg = <0x4300 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4400 {
		regulator-name = "8941_l5";
		reg = <0x4400 0x100>;
		compatible = "qcom,qpnp-regulator";
		qcom,force-type = <0x04 0x10>;
		status = "disabled";
	};

	regulator@4500 {
		regulator-name = "8941_l6";
		reg = <0x4500 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4600 {
		regulator-name = "8941_l7";
		reg = <0x4600 0x100>;
		compatible = "qcom,qpnp-regulator";
		qcom,force-type = <0x04 0x10>;
		status = "disabled";
	};

	regulator@4700 {
		regulator-name = "8941_l8";
		reg = <0x4700 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4800 {
		regulator-name = "8941_l9";
		reg = <0x4800 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4900 {
		regulator-name = "8941_l10";
		reg = <0x4900 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4a00 {
		regulator-name = "8941_l11";
		reg = <0x4a00 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4b00 {
		regulator-name = "8941_l12";
		reg = <0x4b00 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4c00 {
		regulator-name = "8941_l13";
		reg = <0x4c00 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4d00 {
		regulator-name = "8941_l14";
		reg = <0x4d00 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4e00 {
		regulator-name = "8941_l15";
		reg = <0x4e00 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@4f00 {
		regulator-name = "8941_l16";
		reg = <0x4f00 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@5000 {
		regulator-name = "8941_l17";
		reg = <0x5000 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@5100 {
		regulator-name = "8941_l18";
		reg = <0x5100 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@5200 {
		regulator-name = "8941_l19";
		reg = <0x5200 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@5300 {
		regulator-name = "8941_l20";
		reg = <0x5300 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@5400 {
		regulator-name = "8941_l21";
		reg = <0x5400 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@5500 {
		regulator-name = "8941_l22";
		reg = <0x5500 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@5600 {
		regulator-name = "8941_l23";
		reg = <0x5600 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@5700 {
		regulator-name = "8941_l24";
		reg = <0x5700 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@8000 {
		regulator-name = "8941_lvs1";
		reg = <0x8000 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@8100 {
		regulator-name = "8941_lvs2";
		reg = <0x8100 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@8200 {
		regulator-name = "8941_lvs3";
		reg = <0x8200 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@8300 {
		regulator-name = "8941_mvs1";
		reg = <0x8300 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	regulator@8400 {
		regulator-name = "8941_mvs2";
		reg = <0x8400 0x100>;
		compatible = "qcom,qpnp-regulator";
		status = "disabled";
	};

	qcom,vibrator@c000 {
		compatible = "qcom,qpnp-vibrator";
		reg = <0xc000 0x100>;
		label = "vibrator";
		status = "disabled";
	};

	qcom,leds@d000 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd000 0x100>;
		label = "rgb";
	};

	qcom,leds@d100 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd100 0x100>;
		label = "rgb";
	};

	qcom,leds@d200 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd200 0x100>;
		label = "rgb";
	};

	qcom,leds@d300 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd300 0x100>;
		label = "flash";
		flash-boost-supply = <&pm8941_chg_boost>;
		torch-boost-supply = <&pm8941_boost>;
	};

	qcom,leds@d400 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd400 0x100>;
		label = "flash";
	};

	qcom,leds@d500 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd500 0x100>;
		label = "flash";
	};

	qcom,leds@d600 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd600 0x100>;
		label = "flash";
	};

	qcom,leds@d700 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd700 0x100>;
		label = "flash";
	};

	qcom,leds@d800 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd800 0x100>;
		label = "wled";
	};

	qcom,leds@d900 {
		compatible = "qcom,leds-qpnp";
		reg = <0xd900 0x100>;
		label = "wled";
	};

	qcom,leds@da00 {
		compatible = "qcom,leds-qpnp";
		reg = <0xda00 0x100>;
		label = "wled";
	};

	qcom,leds@db00 {
		compatible = "qcom,leds-qpnp";
		reg = <0xdb00 0x100>;
		label = "wled";
	};

	qcom,leds@dc00 {
		compatible = "qcom,leds-qpnp";
		reg = <0xdc00 0x100>;
		label = "wled";
	};

	qcom,leds@dd00 {
		compatible = "qcom,leds-qpnp";
		reg = <0xdd00 0x100>;
		label = "wled";
	};

	qcom,leds@de00 {
		compatible = "qcom,leds-qpnp";
		reg = <0xde00 0x100>;
		label = "wled";
	};

	qcom,leds@df00 {
		compatible = "qcom,leds-qpnp";
		reg = <0xdf00 0x100>;
		label = "wled";
	};

	qcom,leds@e000 {
		compatible = "qcom,leds-qpnp";
		reg = <0xe000 0x100>;
		label = "wled";
	};

	qcom,leds@e100 {
		compatible = "qcom,leds-qpnp";
		reg = <0xe100 0x100>;
		label = "wled";
	};

	qcom,leds@e200 {
		compatible = "qcom,leds-qpnp";
		reg = <0xe200 0x100>;
		label = "kpdbl";
	};

	pwm@b100 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xb100 0x100>,
		      <0xb042 0x7e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <0>;
	};

	pwm@b200 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xb200 0x100>,
		      <0xb042 0x7e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <1>;
	};

	pwm@b300 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xb300 0x100>,
		      <0xb042 0x7e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <2>;
	};

	pwm@b400 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xb400 0x100>,
		      <0xb042 0x7e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <3>;
	};

	pwm@b500 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xb500 0x100>,
		      <0xb042 0x7e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <4>;
	};

	pwm@b600 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xb600 0x100>,
		      <0xb042 0x7e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <5>;
	};

	pwm@b700 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xb700 0x100>,
		      <0xb042 0x7e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <6>;
	};

	pwm@b800 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xb800 0x100>,
		      <0xb042 0x7e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <7>;
	};

	pwm@e400 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xe400 0x100>,
		      <0xe342 0x1e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <8>;
	};

	pwm@e500 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xe500 0x100>,
		      <0xe342 0x1e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <9>;
	};

	pwm@e600 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xe600 0x100>,
		      <0xe342 0x1e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <10>;
	};

	pwm@e700 {
		compatible = "qcom,qpnp-pwm";
		reg = <0xe700 0x100>,
		      <0xe342 0x1e>;
		reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
		qcom,channel-id = <11>;
	};
};