/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/include/ "msm8226-qrd.dtsi"
/include/ "msm8926-camera-sensor-qrd.dtsi"

&qrd_batterydata {
	qcom,rpull-up-kohm = <100>;
	qcom,vref-batt-therm = <1800000>;

	/include/ "batterydata-qrd-4v2-2000mah.dtsi"
};

&pm8226_bms {
	qcom,battery-data = <&qrd_batterydata>;
};

&pm8226_chg {
	qcom,battery-data = <&qrd_batterydata>;
};

&soc {
	i2c@f9927000 { /* BLSP1 QUP5 */
		focaltech@38 {
			compatible = "focaltech,5x06";
			reg = <0x38>;
			interrupt-parent = <&msmgpio>;
			interrupts = <17 0x2>;
			vdd-supply = <&pm8226_l19>;
			vcc_i2c-supply = <&pm8226_lvs1>;
			focaltech,name = "ft5336";
			focaltech,family-id = <0x14>;
			focaltech,reset-gpio = <&msmgpio 16 0x00>;
			focaltech,irq-gpio = <&msmgpio 17 0x00>;
			focaltech,display-coords = <0 0 720 1280>;
			focaltech,panel-coords = <0 0 720 1400>;
			focaltech,button-map= <139 102 158>;
			focaltech,no-force-update;
			focaltech,i2c-pull-up;
			focaltech,group-id = <1>;
			focaltech,hard-reset-delay-ms = <20>;
			focaltech,soft-reset-delay-ms = <200>;
			focaltech,num-max-touches = <5>;
			focaltech,fw-name = "ft_8926_qrd_fw.bin";
			focaltech,fw-delay-aa-ms = <30>;
			focaltech,fw-delay-55-ms = <30>;
			focaltech,fw-upgrade-id1 = <0x11>;
			focaltech,fw-upgrade-id2 = <0x11>;
			focaltech,fw-delay-readid-ms = <10>;
			focaltech,fw-delay-era-flsh-ms = <2000>;
			focaltech,fw-auto-cal;
			focaltech,ignore-id-check;
		};
	};

	gen-vkeys {
		compatible = "qcom,gen-vkeys";
		label = "ft5x06_ts";
		qcom,disp-maxx = <720>;
		qcom,disp-maxy = <1280>;
		qcom,panel-maxx = <720>;
		qcom,panel-maxy = <1404>;
		qcom,key-codes = <139 172 158>;
		qcom,y-offset = <0>;
	};

	gpio-leds {
		compatible = "gpio-leds";
		keypad-backlight {
			gpios = <&msmgpio 34 0>;
			label = "button-backlight";
			linux,default-trigger = "none";
		};
	};
};

&spmi_bus {
	qcom,pm8226@0 {
		qcom,leds@a100 {
			status = "disable";
			};
		};
};

&mdss_dsi0 {
	qcom,dsi-pref-prim-pan = <&dsi_ssd2080m_720_vid>;
};

&dsi_ssd2080m_720_vid {
	qcom,cont-splash-enabled;
};