blob: bdc3bef5011390298fa8d59afec479a33bda5554 [file] [log] [blame]
/*
* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&cci {
actuator0: qcom,actuator@18 {
cell-index = <0>;
reg = <0x18>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
};
actuator1: qcom,actuator@36 {
cell-index = <1>;
reg = <0x36>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
};
qcom,camera@6e {
compatible = "qcom,s5k3l1yx";
reg = <0x6e>;
qcom,slave-id = <0x6e 0x0 0x3121>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,actuator-src = <&actuator0>;
qcom,mount-angle = <90>;
qcom,sensor-name = "s5k3l1yx";
cam_vdig-supply = <&pm8941_l3>;
cam_vana-supply = <&pm8941_l17>;
cam_vio-supply = <&pm8941_lvs3>;
cam_vaf-supply = <&pm8941_l23>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 1 0 0>;
qcom,cam-vreg-min-voltage = <1225000 0 2850000 3000000>;
qcom,cam-vreg-max-voltage = <1225000 0 2850000 3000000>;
qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 15 0>,
<&msmgpio 90 0>,
<&msmgpio 89 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 30000>;
qcom,csi-lane-assign = <0x4320>;
qcom,csi-lane-mask = <0x1F>;
qcom,sensor-position = <0>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
status = "ok";
};
qcom,camera@20 {
compatible = "qcom,imx135";
reg = <0x20>;
qcom,slave-id = <0x20 0x0016 0x0135>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <90>;
qcom,sensor-name = "imx135";
qcom,actuator-src = <&actuator1>;
cam_vdig-supply = <&pm8941_l3>;
cam_vana-supply = <&pm8941_l17>;
cam_vio-supply = <&pm8941_lvs3>;
cam_vaf-supply = <&pm8941_l23>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 1 0 0>;
qcom,cam-vreg-min-voltage = <1225000 0 2850000 3000000>;
qcom,cam-vreg-max-voltage = <1225000 0 2850000 3000000>;
qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 15 0>,
<&msmgpio 90 0>,
<&msmgpio 89 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 30000>;
qcom,csi-lane-assign = <0x4320>;
qcom,csi-lane-mask = <0x1F>;
qcom,sensor-position = <0>;
qcom,sensor-mode = <0>;
qcom,sensor-type = <0>;
qcom,cci-master = <0>;
status = "ok";
};
qcom,camera@6c {
compatible = "qcom,ov2720";
reg = <0x6c>;
qcom,slave-id = <0x6c 0x300A 0x2720>;
qcom,csiphy-sd-index = <2>;
qcom,csid-sd-index = <2>;
qcom,mount-angle = <90>;
qcom,sensor-name = "ov2720";
cam_vdig-supply = <&pm8941_l3>;
cam_vana-supply = <&pm8941_l17>;
cam_vio-supply = <&pm8941_lvs3>;
qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio";
qcom,cam-vreg-type = <0 0 1>;
qcom,cam-vreg-min-voltage = <1225000 2850000 0>;
qcom,cam-vreg-max-voltage = <1225000 2850000 0>;
qcom,cam-vreg-op-mode = <105000 80000 0>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 17 0>,
<&msmgpio 18 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 4000>;
qcom,csi-lane-assign = <0x4320>;
qcom,csi-lane-mask = <0x7>;
qcom,sensor-position = <1>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
status = "ok";
};
qcom,camera@90 {
compatible = "qcom,mt9m114";
reg = <0x90>;
qcom,slave-id = <0x90 0x0 0x2481>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <0>;
qcom,sensor-name = "mt9m114";
cam_vdig-supply = <&pm8941_l3>;
cam_vana-supply = <&pm8941_l17>;
cam_vio-supply = <&pm8941_lvs3>;
qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio";
qcom,cam-vreg-type = <0 0 1>;
qcom,cam-vreg-min-voltage = <1225000 2850000 0>;
qcom,cam-vreg-max-voltage = <1225000 2850000 0>;
qcom,cam-vreg-op-mode = <105000 80000 0>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 16 0>,
<&msmgpio 92 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 4000>;
qcom,csi-lane-assign = <0x4320>;
qcom,csi-lane-mask = <0x3>;
qcom,sensor-position = <1>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
};
qcom,camera@0 {
cell-index = <0>;
compatible = "qcom,camera";
reg = <0x0>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,actuator-src = <&actuator0>;
qcom,vdd-cx-supply = <&pm8841_s2>;
qcom,vdd-cx-name = "qcom,vdd-cx";
cam_vdig-supply = <&pm8941_l3>;
cam_vana-supply = <&pm8941_l17>;
cam_vio-supply = <&pm8941_lvs3>;
cam_vaf-supply = <&pm8941_l23>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 1 0 0>;
qcom,cam-vreg-min-voltage = <1225000 0 2850000 3000000>;
qcom,cam-vreg-max-voltage = <1225000 0 2850000 3000000>;
qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 15 0>,
<&msmgpio 90 0>,
<&msmgpio 89 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,cci-master = <0>;
status = "ok";
};
qcom,camera@1 {
cell-index = <1>;
compatible = "qcom,camera";
reg = <0x1>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <0>;
qcom,vdd-cx-supply = <&pm8841_s2>;
qcom,vdd-cx-name = "qcom,vdd-cx";
cam_vdig-supply = <&pm8941_l3>;
cam_vana-supply = <&pm8941_l17>;
cam_vio-supply = <&pm8941_lvs3>;
cam_vaf-supply = <&pm8941_l23>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 1 0 0>;
qcom,cam-vreg-min-voltage = <1225000 0 2850000 3000000>;
qcom,cam-vreg-max-voltage = <1225000 0 2850000 3000000>;
qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
gpios = <&msmgpio 16 0>,
<&msmgpio 92 0>,
<&msmgpio 91 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,cci-master = <0>;
status = "ok";
};
qcom,camera@2 {
cell-index = <2>;
compatible = "qcom,camera";
reg = <0x2>;
qcom,csiphy-sd-index = <2>;
qcom,csid-sd-index = <2>;
qcom,vdd-cx-supply = <&pm8841_s2>;
qcom,vdd-cx-name = "qcom,vdd-cx";
cam_vdig-supply = <&pm8941_l3>;
cam_vana-supply = <&pm8941_l17>;
cam_vio-supply = <&pm8941_lvs3>;
qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio";
qcom,cam-vreg-type = <0 0 1>;
qcom,cam-vreg-min-voltage = <1225000 2850000 0>;
qcom,cam-vreg-max-voltage = <1225000 2850000 0>;
qcom,cam-vreg-op-mode = <105000 80000 0>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 17 0>,
<&msmgpio 18 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1";
qcom,cci-master = <0>;
status = "ok";
};
};