/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/include/ "msm8974-camera-sensor-fluid.dtsi"
/include/ "msm8974-leds.dtsi"

/ {
	aliases {
		serial0 = &blsp1_uart1;
	};
};

&soc {
	serial@f991e000 {
		status = "ok";
	};

	qcom,mdss_dsi@fd922800{
		qcom,dsi-pref-prim-pan = <&dsi_tosh_720_vid>;
	};

	qcom,mdss_mdp@fd900000 {
		qcom,mdss-pref-prim-intf = "dsi";
		batfet-supply = <&pm8941_chg_batif>;
	};

	qcom,hdmi_tx@fd922100 {
		status = "ok";
	};

	i2c@f9924000 {
		synaptics@20 {
			compatible = "synaptics,rmi4";
			reg = <0x20>;
			interrupt-parent = <&msmgpio>;
			interrupts = <61 0x2008>;
			vdd-supply = <&pm8941_l18>;
			vcc_i2c-supply = <&pm8941_lvs1>;
			synaptics,reset-gpio = <&msmgpio 60 0x00>;
			synaptics,irq-gpio = <&msmgpio 61 0x2008>;
			synaptics,display-coords = <0 0 1079 1919>;
			synaptics,i2c-pull-up;
			synaptics,power-down;
			synaptics,disable-gpios;
			synaptics,do-lockdown;
		};

		atmel_mxt_ts@4a {
			compatible = "atmel,mxt-ts";
			reg = <0x4a>;
			interrupt-parent = <&msmgpio>;
			interrupts = <61 0x2>;
			vdd_ana-supply = <&pm8941_l18>;
			vcc_i2c-supply = <&pm8941_lvs1>;
			atmel,reset-gpio = <&msmgpio 60 0x00>;
			atmel,irq-gpio = <&msmgpio 61 0x00>;
			atmel,panel-coords = <0  0 760 1424>;
			atmel,display-coords = <0 0 720 1280>;
			atmel,i2c-pull-up;
			atmel,no-force-update;
			atmel,cfg_1 {
				atmel,fw-name = "atmel_8974_fluid_v1_0_AA.hex";
				atmel,family-id = <0x82>;
				atmel,variant-id = <0x19>;
				atmel,version = <0x10>;
				atmel,build = <0xaa>;
				atmel,config = [
					/* Object 6, Instance = 0 */
					00 00 00 00 00 00
					/* Object 38, Instance = 0 */
					15 01 00 03 0A 0C 00 00
					/* Object 7, Instance = 0 */
					20 08 32 03
					/* Object 8, Instance = 0 */
					0F 00 0A 0A 00 00 0A 0A 00 00
					/* Object 9, Instance = 0 */
					83 00 00 18 0E 00 70 46 02 01
					00 0A 03 31 04 05 0A 0A 90 05
					F8 02 05 F1 F1 0F 00 00 08 2D
					12 06 00 00 00 01
					/* Object 15, Instance = 0 */
					00 00 00 00 00 00 00 00 00 00
					00
					/* Object 18, Instance = 0 */
					00 00
					/* Object 19, Instance = 0 */
					00 00 00 00 00 00
					/* Object 23, Instance = 0 */
					00 00 00 00 00 00 00 00 00 00
					00 00 00 00 00
					/* Object 25, Instance = 0 */
					00 00 00 00 00 00 00 00 00 00
					00 00 00 00 00
					/* Object 40, Instance = 0 */
					00 00 00 00 00
					/* Object 42, Instance = 0 */
					33 1E 19 10 80 00 00 00 FF 00
					/* Object 46, Instance = 0 */
					00 00 10 10 00 00 03 00 00 01
					/* Object 47, Instance = 0 */
					08 0A 28 0A 02 0A 00 8C 00 20
					00 00 00
					/* Object 55, Instance = 0 */
					00 00 00 00 00 00
					/* Object 56, Instance = 0 */
					00 00 00 18 05 05 05 05 05 05
					05 05 05 05 05 05 05 05 05 05
					05 05 05 05 05 05 05 05 00 00
					00 00 00 00 00 00 00 00 00 00
					00 00
					/* Object 57, Instance = 0 */
					00 00 00
					/* Object 61, Instance = 0 */
					00 00 00 00 00
					/* Object 62, Instance = 0 */
					01 2A 00 16 00 00 00 00 0B 01
					02 03 04 08 00 00 08 10 18 05
					00 0A 05 05 50 14 19 34 1A 7F
					00 00 00 00 00 00 00 00 00 30
					05 02 00 01 00 05 00 00 00 00
					00 00 00 00
					];
			};
		};
	};

	i2c@f9928000 { /* BLSP1 QUP6 */
		nfc-nci@e {
			compatible = "qcom,nfc-nci";
			reg = <0x0e>;
			qcom,irq-gpio = <&msmgpio 59 0x00>;
			qcom,dis-gpio = <&msmgpio 13 0x00>;
			qcom,clk-src = "BBCLK2";
			qcom,clk-en-gpio = <&msmgpio 0 0x00>;
			interrupt-parent = <&msmgpio>;
			interrupts = <59 0>;
			qcom,clk-gpio = <&pm8941_gpios 32 0>;
		};
	};

	i2c@f9967000 {
		sii8334@72 {
			compatible = "qcom,mhl-sii8334";
			reg = <0x72>;
			interrupt-parent = <&msmgpio>;
			interrupts = <82 0x8>;
			mhl-intr-gpio = <&msmgpio 82 0>;
			mhl-pwr-gpio = <&msmgpio 12 0>;
			mhl-rst-gpio = <&pm8941_mpps 8 0>;
			avcc_18-supply = <&pm8941_l24>;
			avcc_12-supply = <&pm8941_l2>;
			smps3a-supply = <&pm8941_s3>;
			vdda-supply = <&pm8941_l12>;
			qcom,hdmi-tx-map = <&mdss_hdmi_tx>;
		};

		isa1200@48 {
			status = "okay";
			reg = <0x48>;
			vcc_i2c-supply = <&pm8941_s3>;
			compatible = "imagis,isa1200";
			label = "vibrator";
			imagis,chip-en;
			imagis,need-pwm-clk;
			imagis,ext-clk-en;
			imagis,hap-en-gpio = <&msmgpio 86 0x00>;
			imagis,max-timeout = <15000>;
			imagis,pwm-div = <256>;
			imagis,mode-ctrl = <2>;
			imagis,regulator {
				regulator-name = "vcc_i2c";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-max-microamp = <9360>;
			};
		};
	};

	gen-vkeys {
		compatible = "qcom,gen-vkeys";
		label = "atmel_mxt_ts";
		qcom,disp-maxx = <720>;
		qcom,disp-maxy = <1280>;
		qcom,panel-maxx = <760>;
		qcom,panel-maxy = <1424>;
		qcom,key-codes = <158 139 102 217>;
	};

	gpio_keys {
		compatible = "gpio-keys";
		input-name = "gpio-keys";

		camera_snapshot {
			label = "camera_snapshot";
			gpios = <&pm8941_gpios 3 0x1>;
			linux,input-type = <1>;
			linux,code = <0x2fe>;
			gpio-key,wakeup;
			debounce-interval = <15>;
		};

		camera_focus {
			label = "camera_focus";
			gpios = <&pm8941_gpios 4 0x1>;
			linux,input-type = <1>;
			linux,code = <0x210>;
			gpio-key,wakeup;
			debounce-interval = <15>;
		};

		vol_up {
			label = "volume_up";
			gpios = <&pm8941_gpios 5 0x1>;
			linux,input-type = <1>;
			linux,code = <115>;
			gpio-key,wakeup;
			debounce-interval = <15>;
		};
	};

	spi@f9923000 {
		ethernet-switch@2 {
			compatible = "micrel,ks8851";
			reg = <2>;
			interrupt-parent = <&msmgpio>;
			interrupts = <94 0>;
			spi-max-frequency = <4800000>;
			rst-gpio = <&pm8941_mpps 6 0>;
			vdd-io-supply = <&spi_eth_vreg>;
			vdd-phy-supply = <&spi_eth_vreg>;
		};
	};

	sound {
		qcom,model = "msm8974-taiko-fluid-snd-card";
		qcom,audio-routing =
			"RX_BIAS", "MCLK",
			"LDO_H", "MCLK",
			"AMIC1", "MIC BIAS1 Internal1",
			"MIC BIAS1 Internal1", "Handset Mic",
			"AMIC2", "MIC BIAS2 External",
			"MIC BIAS2 External", "Headset Mic",
			"AMIC3", "MIC BIAS2 External",
			"MIC BIAS2 External", "ANCRight Headset Mic",
			"AMIC4", "MIC BIAS2 External",
			"MIC BIAS2 External", "ANCLeft Headset Mic",
			"DMIC1", "MIC BIAS1 External",
			"MIC BIAS1 External", "Digital Mic1",
			"DMIC2", "MIC BIAS1 External",
			"MIC BIAS1 External", "Digital Mic2",
			"DMIC3", "MIC BIAS3 External",
			"MIC BIAS3 External", "Digital Mic3",
			"DMIC4", "MIC BIAS3 External",
			"MIC BIAS3 External", "Digital Mic4",
			"DMIC5", "MIC BIAS4 External",
			"MIC BIAS4 External", "Digital Mic5",
			"DMIC6", "MIC BIAS4 External",
			"MIC BIAS4 External", "Digital Mic6",
			"Lineout_1 amp", "LINEOUT1",
			"Lineout_3 amp", "LINEOUT3";

		qcom,hdmi-audio-rx;
		qcom,ext-ult-lo-amp-gpio = <&pm8941_gpios 6 0>;
		qcom,cdc-micbias2-headset-only;
		qcom,mbhc-audio-jack-type = "6-pole-jack";
	};
};

&slim_msm {
	taiko_codec {
		qcom,cdc-micbias1-ext-cap;
		qcom,cdc-micbias2-ext-cap;
		qcom,cdc-micbias3-ext-cap;
		qcom,cdc-micbias4-ext-cap;

		/* If boot isn't available, vph_pwr_vreg can be used instead */
		cdc-vdd-spkdrv-supply = <&pm8941_boost>;
		qcom,cdc-vdd-spkdrv-voltage = <5000000 5000000>;
		qcom,cdc-vdd-spkdrv-current = <1250000>;

		qcom,cdc-on-demand-supplies = "cdc-vdd-spkdrv";
	};
};

&pm8941_lsid1 {
	qcom,leds@d800 {
		status = "okay";
		qcom,wled_0 {
			label = "wled";
			linux,name = "wled:backlight";
			linux,default-trigger = "bkl-trigger";
			qcom,cs-out-en;
			qcom,op-fdbck = <1>;
			qcom,default-state = "on";
			qcom,max-current = <25>;
			qcom,ctrl-delay-us = <0>;
			qcom,boost-curr-lim = <5>;
			qcom,cp-sel = <0>;
			qcom,switch-freq = <11>;
			qcom,ovp-val = <2>;
			qcom,num-strings = <3>;
			qcom,id = <0>;
		};
	};

	qcom,leds@d900 {
		status = "disabled";
	};

	qcom,leds@da00 {
		status = "disabled";
	};

	qcom,leds@db00 {
		status = "disabled";
	};

	qcom,leds@dc00 {
		status = "disabled";
	};

	qcom,leds@dd00 {
		status = "disabled";
	};

	qcom,leds@de00 {
		status = "disabled";
	};

	qcom,leds@df00 {
		status = "disabled";
	};

	qcom,leds@e000 {
		status = "disabled";
	};

	qcom,leds@e100 {
		status = "disabled";
	};
};

&sdcc1 {
	status = "disabled";
};

&sdcc2 {
	#address-cells = <0>;
	interrupt-parent = <&sdcc2>;
	interrupts = <0 1 2>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0xffffffff>;
	interrupt-map = <0 &intc 0 125 0
			1 &intc 0 220 0
			2 &msmgpio 62 0x3>;
	interrupt-names = "core_irq", "bam_irq", "status_irq";
	cd-gpios = <&msmgpio 62 0x1>;
	status = "disabled";
};

&sdhc_1 {
	vdd-supply = <&pm8941_l20>;
	vdd-io-supply = <&pm8941_s3>;

	qcom,vdd-always-on;
	qcom,vdd-lpm-sup;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <800 500000>;

	qcom,vdd-io-always-on;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <250 154000>;

	qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
	qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
	qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */

	qcom,nonremovable;
	status = "ok";
};

&sdhc_2 {
	#address-cells = <0>;
	interrupt-parent = <&sdhc_2>;
	interrupts = <0 1 2>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0xffffffff>;
	interrupt-map = <0 &intc 0 125 0
			1 &intc 0 221 0
			2 &msmgpio 62 0x3>;
	interrupt-names = "hc_irq", "pwr_irq", "status_irq";
	cd-gpios = <&msmgpio 62 0x1>;

	vdd-supply = <&pm8941_l21>;
	vdd-io-supply = <&pm8941_l13>;

	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <9000 800000>;

	qcom,vdd-io-voltage-level = <1800000 2950000>;
	qcom,vdd-io-current-level = <6 22000>;

	qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
	qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
	qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
	status = "ok";
};

/* Drive strength recommendations for clock line from hardware team is 10 mA.
 * But since the driver has been been using the below values from the start
 * without any problems, continue to use those.
 */
&sdcc1 {
	qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */
};

&sdcc2 {
	qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */
};

&sdhc_1 {
	qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */
};

&sdhc_2 {
	qcom,pad-drv-on = <0x7 0x4 0x4>; /* 16mA, 10mA, 10mA */
};

&usb3 {
	qcom,otg-capability;
};

&pm8941_bms {
	qcom,enable-fcc-learning;
	qcom,min-fcc-learning-soc = <20>;
	qcom,min-fcc-ocv-pc = <30>;
	qcom,min-fcc-learning-samples = <5>;
	qcom,fcc-resolution = <10>;
	status = "ok";
};

&pm8941_chg {
	status = "ok";
	qcom,charging-disabled;

	qcom,chgr@1000 {
		status = "ok";
	};

	qcom,buck@1100 {
		status = "ok";
	};

	qcom,bat-if@1200 {
		status = "ok";
	};

	qcom,usb-chgpth@1300 {
		status = "ok";
	};

	qcom,dc-chgpth@1400 {
		status = "ok";
	};

	qcom,boost@1500 {
		status = "ok";
	};

	qcom,chg-misc@1600 {
		status = "ok";
	};
};

&pm8941_gpios {
	gpio@c000 { /* GPIO 1 */
	};

	gpio@c100 { /* GPIO 2 */
	};

	gpio@c200 { /* GPIO 3 */
		qcom,mode = <0>;
		qcom,pull = <0>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <0>;
	};

	gpio@c300 { /* GPIO 4 */
		qcom,mode = <0>;
		qcom,pull = <0>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <0>;
	};

	gpio@c400 { /* GPIO 5 */
		qcom,mode = <0>;
		qcom,pull = <0>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <0>;
	};

	gpio@c500 { /* GPIO 6 */
	};

	gpio@c600 { /* GPIO 7 */
	};

	gpio@c700 { /* GPIO 8 */
	};

	gpio@c800 { /* GPIO 9 */
	};

	gpio@c900 { /* GPIO 10 */
	};

	gpio@ca00 { /* GPIO 11 */
	};

	gpio@cb00 { /* GPIO 12 */
		qcom,mode = <1>;		/* QPNP_PIN_MODE_DIG_OUT */
		qcom,output-type = <0>;		/* QPNP_PIN_OUT_BUF_CMOS */
		qcom,pull = <5>;		/* QPNP_PIN_PULL_NO */
		qcom,vin-sel = <2>;		/* QPNP_PIN_VIN2 */
		qcom,out-strength = <2>;	/* QPNP_PIN_OUT_STRENGTH_MED */
		qcom,src-sel = <0>;		/* QPNP_PIN_SEL_FUNC_CONSTANT */
		qcom,master-en = <1>;
	};

	gpio@cc00 { /* GPIO 13 */
	};

	gpio@cd00 { /* GPIO 14 */
	};

	gpio@ce00 { /* GPIO 15 */
		qcom,mode = <1>;
		qcom,output-type = <0>;
		qcom,pull = <5>;
		qcom,vin-sel = <2>;
		qcom,out-strength = <1>;
		qcom,src-sel = <2>;
		qcom,master-en = <1>;
	};

	gpio@cf00 { /* GPIO 16 */
		qcom,mode = <1>;
		qcom,output-type = <0>;
		qcom,pull = <5>;
		qcom,vin-sel = <2>;
		qcom,out-strength = <3>;
		qcom,src-sel = <2>;
		qcom,master-en = <1>;
	};

	gpio@d000 { /* GPIO 17 */
	};

	gpio@d100 { /* GPIO 18 */
	};

	gpio@d200 { /* GPIO 19 */
		qcom,mode = <1>;		/* QPNP_PIN_MODE_DIG_OUT */
		qcom,output-type = <0>;		/* QPNP_PIN_OUT_BUF_CMOS */
		qcom,pull = <5>;		/* QPNP_PIN_PULL_NO */
		qcom,vin-sel = <2>;		/* QPNP_PIN_VIN2 */
		qcom,out-strength = <2>;	/* QPNP_PIN_OUT_STRENGTH_MED */
		qcom,src-sel = <0>;		/* QPNP_PIN_SEL_FUNC_CONSTANT */
		qcom,master-en = <1>;
	};

	gpio@d300 { /* GPIO 20 */
	};

	gpio@d400 { /* GPIO 21 */
	};

	gpio@d500 { /* GPIO 22 */
	};

	gpio@d600 { /* GPIO 23 */
	};

	gpio@d700 { /* GPIO 24 */
	};

	gpio@d800 { /* GPIO 25 */
	};

	gpio@d900 { /* GPIO 26 */
	};

	gpio@da00 { /* GPIO 27 */
	};

	gpio@db00 { /* GPIO 28 */
	};

	gpio@dc00 { /* GPIO 29 */
		qcom,pull = <0>; /* set to default pull */
		qcom,master-en = <1>;
		qcom,vin-sel = <2>; /* select 1.8 V source */
	};

	gpio@dd00 { /* GPIO 30 */
	};

	gpio@de00 { /* GPIO 31 */
	};

	gpio@df00 { /* GPIO 32 */
		qcom,mode = <0>;		/* QPNP_PIN_MODE_DIG_IN */
		qcom,pull = <5>;		/* QPNP_PIN_PULL_NO */
		qcom,vin-sel = <2>;		/* QPNP_PIN_VIN2 */
		qcom,src-sel = <2>;		/* QPNP_PIN_SEL_FUNC_1 */
		qcom,master-en = <1>;
	};

	gpio@e000 { /* GPIO 33 */
	};

	gpio@e100 { /* GPIO 34 */
	};

	gpio@e200 { /* GPIO 35 */
	};

	gpio@e300 { /* GPIO 36 */
	};
};

&pm8941_mpps {

	mpp@a000 { /* MPP 1 */
		status = "disabled";
	};

	mpp@a100 { /* MPP 2 */
	};

	mpp@a200 { /* MPP 3 */
	};

	mpp@a300 { /* MPP 4 */
	};

	mpp@a400 { /* MPP 5 */
	};

	mpp@a500 { /* MPP 6 */
		/* SPI_ETH_RST config */
		qcom,mode = <1>; /* DIG_OUT */
		qcom,output-type = <0>; /* CMOS */
		qcom,vin-sel = <2>; /* PM8941_S3 1.8V > 1.6V */
		qcom,src-sel = <0>; /* CONSTANT */
		qcom,master-en = <1>; /* ENABLE MPP */
	};

	mpp@a600 { /* MPP 7 */
	};

	mpp@a700 { /* MPP 8 */
		qcom,mode = <1>; /* DIG_OUT */
		qcom,output-type = <0>; /* CMOS */
		qcom,pull = <0>;
		qcom,vin-sel = <2>; /* PM8941_S3 1.8V > 1.6V */
		qcom,src-sel = <0>; /* CONSTANT */
		qcom,master-en = <1>; /* ENABLE MPP */
	};
};

&pm8841_mpps {

	mpp@a000 { /* MPP 1 */
	};

	mpp@a100 { /* MPP 2 */
	};

	mpp@a200 { /* MPP 3 */
	};

	mpp@a300 { /* MPP 4 */
	};
};

&spi_epm {
	epm-adc@0 {
		compatible = "cy,epm-adc-cy8c5568lti-114";
		reg = <0>;
		interrupt-parent = <&msmgpio>;
		spi-max-frequency = <960000>;
		qcom,channels = <31>;
		qcom,gain = <100 100 100 100 100 100 100 100 100 100
				100 100 100 100 100 100 1 1 1 1
				1 1 1 1 1 1 1 1 1 1
				1>;
		qcom,rsense = <10 10 10 10 100 200 500 10 10 10
				200 200 10 500 10 10 1 1 1 1
				1 1 1 1 1 1 1 1 1 1
				1>;
		qcom,channel-type = <0xf0000000>;
	};
};

&dsi_tosh_720_vid {
       qcom,cont-splash-enabled;
};