/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/include/ "msm8974pro-ac-pma8084.dtsi"
&spmi_bus {
	pm8941_lsid0: qcom,pm8941@2 {
		reg = <0x2>;
	};
	pm8941_lsid1: qcom,pm8941@3 {
		reg = <0x3>;
	};
};
/include/ "msm-pm8941.dtsi"

&pm8941_lsid0 {
	qcom,power-on@800 {
		status = "disabled";
	};

	clkdiv@5b00 {
		status = "disabled";
	};

	clkdiv@5c00 {
		status = "disabled";
	};

	clkdiv@5d00 {
		status = "disabled";
	};

	qcom,pm8941_rtc {
		status = "disabled";
	};

	gpios {
		status = "disabled";
	};

	mpps {
		status = "disabled";
	};
};

&pm8941_lsid1 {
	pm8941_boost: regulator@a000 {
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		qcom,enable-time = <500>;
		status = "okay";
	};

	pm8941_mvs1: regulator@8300 {
		parent-supply = <&pm8941_chg_otg>;
		qcom,enable-time = <1000>;
		qcom,pull-down-enable = <1>;
		interrupts = <0x3 0x83 0x2>;
		interrupt-names = "ocp";
		qcom,ocp-enable = <1>;
		qcom,ocp-max-retries = <10>;
		qcom,ocp-retry-delay = <30>;
		qcom,soft-start-enable = <1>;
		qcom,vs-soft-start-strength = <0>;
		qcom,hpm-enable = <1>;
		qcom,auto-mode-enable = <0>;
		status = "okay";
	};
};

&pma8084_mvs1 {
	parent-supply = <&pm8941_boost>;
};

&pm8941_chg {
	otg-parent-supply = <&pm8941_boost>;
};

&pm8941_chg_boost {
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	regulator-name = "8941_smbb_boost";
};

&pm8941_chg_batif {
	regulator-name = "batfet";
};

&pm8941_chg_otg {
	regulator-name = "8941_smbb_otg";
};

&usb3 {
	vbus_dwc3-supply = <&pm8941_mvs1>;
	qcom,misc-ref = <&pm8941_misc>;
	dwc_usb3-adc_tm = <&pm8941_adc_tm>;
	qcom,usbin-vadc = <&pm8941_vadc>;
	interrupt-map-mask = <0x0 0xffffffff>;
	interrupt-map = <0x0 0 &intc 0 133 0
			0x0 1 &spmi_bus 0x0 0x2 0x9 0x0>;
	interrupt-names = "hs_phy_irq", "pmic_id_irq";
	qcom,dwc-ssphy-deemphasis-value = <26>;
};

/* Correct PM8941 local slave ID 0 to use global SID 4 for all interrupts. */
&pm8941_lsid0 {
	qcom,temp-alarm@2400 {
		interrupts = <0x2 0x24 0x0>;
	};

	qcom,power-on@800 {
		interrupts = <0x2 0x8 0x0>,
			     <0x2 0x8 0x1>,
			     <0x2 0x8 0x4>,
			     <0x2 0x8 0x5>;
		interrupt-names = "kpdpwr", "resin",
				"resin-bark", "kpdpwr-resin-bark";
	};

	qcom,bsi@1b00 {
		interrupts = <0x2 0x1b 0x0>,
			     <0x2 0x1b 0x1>,
			     <0x2 0x1b 0x2>,
			     <0x2 0x12 0x0>;
		interrupt-names = "err",
				  "rx",
				  "tx",
				  "batt-present";
	};

	qcom,bms {
		qcom,bms-bms@4000 {
			interrupts =	<0x2 0x40 0x0>,
					<0x2 0x40 0x1>,
					<0x2 0x40 0x2>,
					<0x2 0x40 0x3>,
					<0x2 0x40 0x4>,
					<0x2 0x40 0x5>,
					<0x2 0x40 0x6>,
					<0x2 0x40 0x7>;
			interrupt-names = "cc_thr",
					  "ocv_for_r",
					  "good_ocv",
					  "charge_begin",
					  "ocv_thr",
					  "sw_cc_thr",
					  "vsense_avg",
					  "vsense_for_r";
		};
	};

	qcom,charger {
		qcom,chgr@1000 {
			interrupts =	<0x2 0x10 0x0>,
					<0x2 0x10 0x1>,
					<0x2 0x10 0x2>,
					<0x2 0x10 0x3>,
					<0x2 0x10 0x4>,
					<0x2 0x10 0x5>,
					<0x2 0x10 0x6>,
					<0x2 0x10 0x7>;
			interrupt-names =	"vbat-det-lo",
						"vbat-det-hi",
						"chgwdog",
						"state-change",
						"trkl-chg-on",
						"fast-chg-on",
						"chg-failed",
						"chg-done";
		};

		qcom,buck@1100 {
			interrupts =	<0x2 0x11 0x0>,
					<0x2 0x11 0x1>,
					<0x2 0x11 0x2>,
					<0x2 0x11 0x3>,
					<0x2 0x11 0x4>,
					<0x2 0x11 0x5>,
					<0x2 0x11 0x6>;
			interrupt-names =	"vbat-ov",
						"vreg-ov",
						"overtemp",
						"vchg-loop",
						"ichg-loop",
						"ibat-loop",
						"vdd-loop";
		};

		qcom,bat-if@1200 {
			interrupts =	<0x2 0x12 0x0>,
					<0x2 0x12 0x1>,
					<0x2 0x12 0x2>,
					<0x2 0x12 0x3>,
					<0x2 0x12 0x4>;
			interrupt-names =	"batt-pres",
						"bat-temp-ok",
						"bat-fet-on",
						"vcp-on",
						"psi";
		};

		qcom,usb-chgpth@1300 {
			interrupts =	<0x2 0x13 0x0>,
					<0x2 0x13 0x1>,
					<0x2 0x13 0x2>;
			interrupt-names =	"coarse-det-usb",
						"usbin-valid",
						"chg-gone";
		};

		qcom,dc-chgpth@1400 {
			interrupts =	<0x2 0x14 0x0>,
					<0x2 0x14 0x1>;
			interrupt-names =	"coarse-det-dc",
						"dcin-valid";
		};

		qcom,boost@1500 {
			interrupts =	<0x2 0x15 0x0>,
					<0x2 0x15 0x1>;
			interrupt-names =	"boost-pwr-ok",
						"limit-error";
		};
	};

	qcom,pm8941_rtc {
		qcom,pm8941_rtc_alarm@6100 {
			interrupts = <0x2 0x61 0x1>;
		};
	};

	vadc@3100 {
		interrupts = <0x2 0x31 0x0>;
		interrupt-names = "eoc-int-en-set";
	};

	iadc@3600 {
		interrupts = <0x2 0x36 0x0>;
		interrupt-names = "eoc-int-en-set";
	};

	qcom,vadc@3400 {
		interrupts =	<0x2 0x34 0x0>,
				<0x2 0x34 0x3>,
				<0x2 0x34 0x4>;
		interrupt-names =	"eoc-int-en-set",
					"high-thr-en-set",
					"low-thr-en-set";
	};
};