/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/include/ "skeleton.dtsi"

/ {
	model = "Qualcomm MSM KRYPTON";
	compatible = "qcom,msmkrypton";
	interrupt-parent = <&intc>;

	aliases {
		spi6 = &spi_6;
	};

	soc: soc { };
};

/include/ "msmkrypton-smp2p.dtsi"

&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	intc: interrupt-controller@f9000000 {
		compatible = "qcom,msm-qgic2";
		interrupt-controller;
		#interrupt-cells = <3>;
		reg = <0xf9000000 0x1000>,
		      <0xf9002000 0x1000>;
	};

	msmgpio: gpio@fd510000 {
		compatible = "qcom,msm-gpio";
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		reg = <0xfd510000 0x4000>;
		ngpio = <89>;
		interrupts = <0 208 0>;
		qcom,direct-connect-irqs = <8>;
	};

	qcom,msm-imem@fe805000 {
		compatible = "qcom,msm-imem";
		reg = <0xfe807800 0x1000>; /* Address and size of IMEM */
	};

	qcom,msm-mem-hole {
		compatible = "qcom,msm-mem-hole";
		qcom,memblock-remove = <0x02000000 0x06000000>; /* Address and Size of Hole */
	};

	timer@f9020000 {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		compatible = "arm,armv7-timer-mem";
		reg = <0xf9020000 0x1000>;
		clock-frequency = <19200000>;

		frame@f9021000 {
			frame-number = <0>;
			interrupts = <0 7 0x4>,
				     <0 6 0x4>;
			reg = <0xf9021000 0x1000>,
			      <0xf9022000 0x1000>;
		};

		frame@f9023000 {
			frame-number = <1>;
			interrupts = <0 8 0x4>;
			reg = <0xf9023000 0x1000>;
			status = "disabled";
		};

		frame@f9024000 {
			frame-number = <2>;
			interrupts = <0 9 0x4>;
			reg = <0xf9024000 0x1000>;
			status = "disabled";
		};

		frame@f9025000 {
			frame-number = <3>;
			interrupts = <0 10 0x4>;
			reg = <0xf9025000 0x1000>;
			status = "disabled";
		};

		frame@f9026000 {
			frame-number = <4>;
			interrupts = <0 11 0x4>;
			reg = <0xf9026000 0x1000>;
			status = "disabled";
		};

		frame@f9027000 {
			frame-number = <5>;
			interrupts = <0 12 0x4>;
			reg = <0xf9027000 0x1000>;
			status = "disabled";
		};

		frame@f9028000 {
			frame-number = <6>;
			interrupts = <0 13 0x4>;
			reg = <0xf9028000 0x1000>;
			status = "disabled";
		};

		frame@f9029000 {
			frame-number = <7>;
			interrupts = <0 14 0x4>;
			reg = <0xf9029000 0x1000>;
			status = "disabled";
		};
	};

	uartdm3: serial@f991f000 {
		compatible = "qcom,msm-lsuart-v14";
		reg = <0xf991f000 0x1000>;
		interrupts = <0 109 0>;
		status = "disabled";
	};

	qcom,sps@f9980000 {
		compatible = "qcom,msm_sps";
		reg = <0xf9984000 0x15000>,
		      <0xf9999000 0xb000>,
		      <0xfe803000 0xd000>,
			  <0xfe805000 0x1000>;
		interrupts = <0 94 0>;
	};

	spi_6: spi@f9928000 { /* BLSP1 QUP6 */
		compatible = "qcom,spi-qup-v2";
		#address-cells = <1>;
		#size-cells = <0>;
		reg-names = "spi_physical", "spi_bam_physical";
		reg = <0xf9928000 0x1000>,
		      <0xf9904000 0x19000>;
		interrupt-names = "spi_irq", "spi_bam_irq";
		interrupts = <0 100 0>, <0 238 0>;
		spi-max-frequency = <19200000>;

		qcom,gpio-mosi = <&msmgpio 20 0>;
		qcom,gpio-miso = <&msmgpio 21 0>;
		qcom,gpio-clk  = <&msmgpio 23 0>;
		qcom,gpio-cs0  = <&msmgpio 22 0>;

		qcom,infinite-mode = <0>;
		qcom,use-bam;
		qcom,ver-reg-exists;
		qcom,bam-consumer-pipe-index = <22>;
		qcom,bam-producer-pipe-index = <23>;
		qcom,master-id = <86>;
	};

	qcom,ipc-spinlock@fd484000 {
		compatible = "qcom,ipc-spinlock-sfpb";
		reg = <0xfd484000 0x400>;
		qcom,num-locks = <8>;
	};

	qcom,smem@2200000 {
		compatible = "qcom,smem";
		reg = <0x2200000 0x100000>,
			<0xf9011000 0x1000>,
			<0xfc428000 0x4000>;
		reg-names = "smem", "irq-reg-base", "aux-mem1";

		qcom,smd-modem {
			compatible = "qcom,smd";
			qcom,smd-edge = <0>;
			qcom,smd-irq-offset = <0x8>;
			qcom,smd-irq-bitmask = <0x1000>;
			qcom,pil-string = "modem";
			interrupts = <0 25 1>;
		};

		qcom,smsm-modem {
			compatible = "qcom,smsm";
			qcom,smsm-edge = <0>;
			qcom,smsm-irq-offset = <0x8>;
			qcom,smsm-irq-bitmask = <0x2000>;
			interrupts = <0 26 1>;
		};

		qcom,smd-adsp {
			compatible = "qcom,smd";
			qcom,smd-edge = <1>;
			qcom,smd-irq-offset = <0x8>;
			qcom,smd-irq-bitmask = <0x100>;
			qcom,pil-string = "adsp";
			interrupts = <0 156 1>;
		};

		qcom,smsm-adsp {
			compatible = "qcom,smsm";
			qcom,smsm-edge = <1>;
			qcom,smsm-irq-offset = <0x8>;
			qcom,smsm-irq-bitmask = <0x200>;
			interrupts = <0 157 1>;
		};

		qcom,smd-rpm {
			compatible = "qcom,smd";
			qcom,smd-edge = <15>;
			qcom,smd-irq-offset = <0x8>;
			qcom,smd-irq-bitmask = <0x1>;
			interrupts = <0 168 1>;
			qcom,irq-no-suspend;
		};
	};

	rpm_bus: qcom,rpm-smd {
		compatible = "qcom,rpm-smd";
		rpm-channel-name = "rpm_requests";
		rpm-channel-type = <15>; /* SMD_APPS_RPM */
		rpm-standalone = <1>;
	};
};