sh: sh7343 Enable SDIO IRQs
This patch enables interrupt generation for SDIO IRQs
of the SDHI block on the sh7343 processor. Use together
with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and
with the MMC_CAP_SDIO_IRQ flag in the board code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 3681cafd..b8e5bc8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -360,6 +360,8 @@
enum {
UNUSED = 0,
+ ENABLED,
+ DISABLED,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -375,15 +377,13 @@
I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
- IRDA,
- SDHI0, SDHI1, SDHI2, SDHI3,
- CMT, TSIF, SIU,
+ IRDA, SDHI, CMT, TSIF, SIU,
TMU0, TMU1, TMU2,
JPU, LCDC,
/* interrupt groups */
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB,
+ DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, USB,
};
static struct intc_vect vectors[] __initdata = {
@@ -412,8 +412,8 @@
INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
- INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
- INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+ INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
+ INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
INTC_VECT(SIU, 0xf80),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
@@ -431,7 +431,6 @@
INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
- INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
INTC_GROUP(USB, USBI0, USBI1),
};
@@ -452,7 +451,7 @@
{ I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+ { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USBI1, USBI0 } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
@@ -488,9 +487,13 @@
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups,
- mask_registers, prio_registers, sense_registers,
- ack_registers);
+static struct intc_desc intc_desc __initdata = {
+ .name = "sh7343",
+ .force_enable = ENABLED,
+ .force_disable = DISABLED,
+ .hw = INTC_HW_DESC(vectors, groups, mask_registers,
+ prio_registers, sense_registers, ack_registers),
+};
void __init plat_irq_setup(void)
{