[PATCH] ppc64: Add new PHY to sungem
This patch adds support for some new PHY models to sungem as used on some
recent Apple iMac G5 models.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 0fca414..d3ddb41 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -32,6 +32,10 @@
#include <linux/ethtool.h>
#include <linux/delay.h>
+#ifdef CONFIG_PPC_PMAC
+#include <asm/prom.h>
+#endif
+
#include "sungem_phy.h"
/* Link modes of the BCM5400 PHY */
@@ -281,10 +285,12 @@
static int bcm5421_init(struct mii_phy* phy)
{
u16 data;
- int rev;
+ unsigned int id;
- rev = phy_read(phy, MII_PHYSID2) & 0x000f;
- if (rev == 0) {
+ id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2));
+
+ /* Revision 0 of 5421 needs some fixups */
+ if (id == 0x002060e0) {
/* This is borrowed from MacOS
*/
phy_write(phy, 0x18, 0x1007);
@@ -297,21 +303,28 @@
data = phy_read(phy, 0x15);
phy_write(phy, 0x15, data | 0x0200);
}
-#if 0
- /* This has to be verified before I enable it */
- /* Enable automatic low-power */
- phy_write(phy, 0x1c, 0x9002);
- phy_write(phy, 0x1c, 0xa821);
- phy_write(phy, 0x1c, 0x941d);
-#endif
- return 0;
-}
-static int bcm5421k2_init(struct mii_phy* phy)
-{
- /* Init code borrowed from OF */
- phy_write(phy, 4, 0x01e1);
- phy_write(phy, 9, 0x0300);
+ /* Pick up some init code from OF for K2 version */
+ if ((id & 0xfffffff0) == 0x002062e0) {
+ phy_write(phy, 4, 0x01e1);
+ phy_write(phy, 9, 0x0300);
+ }
+
+ /* Check if we can enable automatic low power */
+#ifdef CONFIG_PPC_PMAC
+ if (phy->platform_data) {
+ struct device_node *np = of_get_parent(phy->platform_data);
+ int can_low_power = 1;
+ if (np == NULL || get_property(np, "no-autolowpower", NULL))
+ can_low_power = 0;
+ if (can_low_power) {
+ /* Enable automatic low-power */
+ phy_write(phy, 0x1c, 0x9002);
+ phy_write(phy, 0x1c, 0xa821);
+ phy_write(phy, 0x1c, 0x941d);
+ }
+ }
+#endif /* CONFIG_PPC_PMAC */
return 0;
}
@@ -762,7 +775,7 @@
/* Broadcom BCM 5421 built-in K2 */
static struct mii_phy_ops bcm5421k2_phy_ops = {
- .init = bcm5421k2_init,
+ .init = bcm5421_init,
.suspend = bcm5411_suspend,
.setup_aneg = bcm54xx_setup_aneg,
.setup_forced = bcm54xx_setup_forced,
@@ -779,6 +792,25 @@
.ops = &bcm5421k2_phy_ops
};
+/* Broadcom BCM 5462 built-in Vesta */
+static struct mii_phy_ops bcm5462V_phy_ops = {
+ .init = bcm5421_init,
+ .suspend = bcm5411_suspend,
+ .setup_aneg = bcm54xx_setup_aneg,
+ .setup_forced = bcm54xx_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = bcm54xx_read_link,
+};
+
+static struct mii_phy_def bcm5462V_phy_def = {
+ .phy_id = 0x002060d0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5462-Vesta",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5462V_phy_ops
+};
+
/* Marvell 88E1101 (Apple seem to deal with 2 different revs,
* I masked out the 8 last bits to get both, but some specs
* would be useful here) --BenH.
@@ -824,6 +856,7 @@
&bcm5411_phy_def,
&bcm5421_phy_def,
&bcm5421k2_phy_def,
+ &bcm5462V_phy_def,
&marvell_phy_def,
&genmii_phy_def,
NULL