diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 1866155..690255c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1256,6 +1256,7 @@
 	int err = 0;
 
 	card = host->card;
+	mmc_claim_host(host);
 
 	/*
 	 * Send power notify command only if card
@@ -1286,6 +1287,7 @@
 		/* Set the card state to no notification after the poweroff */
 		card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
 	}
+	mmc_release_host(host);
 }
 
 /*
@@ -1344,12 +1346,28 @@
 
 void mmc_power_off(struct mmc_host *host)
 {
+	int err = 0;
 	mmc_host_clk_hold(host);
 
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
 
-	mmc_poweroff_notify(host);
+	/*
+	 * For eMMC 4.5 device send AWAKE command before
+	 * POWER_OFF_NOTIFY command, because in sleep state
+	 * eMMC 4.5 devices respond to only RESET and AWAKE cmd
+	 */
+	if (host->card && mmc_card_is_sleep(host->card) &&
+	    host->bus_ops->resume) {
+		err = host->bus_ops->resume(host);
+
+		if (!err)
+			mmc_poweroff_notify(host);
+		else
+			pr_warning("%s: error %d during resume "
+				   "(continue with poweroff sequence)\n",
+				   mmc_hostname(host), err);
+	}
 
 	/*
 	 * Reset ocr mask to be the highest possible voltage supported for
@@ -2403,12 +2421,6 @@
 		 */
 		if (mmc_try_claim_host(host)) {
 			if (host->bus_ops->suspend) {
-				/*
-				 * For eMMC 4.5 device send notify command
-				 * before sleep, because in sleep state eMMC 4.5
-				 * devices respond to only RESET and AWAKE cmd
-				 */
-				mmc_poweroff_notify(host);
 				err = host->bus_ops->suspend(host);
 			}
 			mmc_do_release_host(host);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index dd3fcac..9be0319 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1316,11 +1316,13 @@
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	if (mmc_card_can_sleep(host))
+	if (mmc_card_can_sleep(host)) {
 		err = mmc_card_sleep(host);
-	else if (!mmc_host_is_spi(host))
+		if (!err)
+			mmc_card_set_sleep(host->card);
+	} else if (!mmc_host_is_spi(host))
 		mmc_deselect_cards(host);
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
+	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 	mmc_release_host(host);
 
 	return err;
@@ -1340,7 +1342,11 @@
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	err = mmc_init_card(host, host->ocr, host->card);
+	if (mmc_card_is_sleep(host->card)) {
+		err = mmc_card_awake(host);
+		mmc_card_clr_sleep(host->card);
+	} else
+		err = mmc_init_card(host, host->ocr, host->card);
 	mmc_release_host(host);
 
 	return err;
@@ -1350,7 +1356,8 @@
 {
 	int ret;
 
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
+	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
+	mmc_card_clr_sleep(host->card);
 	mmc_claim_host(host);
 	ret = mmc_init_card(host, host->ocr, host->card);
 	mmc_release_host(host);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 9f22ba5..19a41d1 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -217,6 +217,7 @@
 #define MMC_CARD_SDXC		(1<<6)		/* card is SDXC */
 #define MMC_CARD_REMOVED	(1<<7)		/* card has been removed */
 #define MMC_STATE_HIGHSPEED_200	(1<<8)		/* card is in HS200 mode */
+#define MMC_STATE_SLEEP		(1<<9)		/* card is in sleep state */
 	unsigned int		quirks; 	/* card quirks */
 #define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
 #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
@@ -382,6 +383,7 @@
 #define mmc_sd_card_uhs(c)	((c)->state & MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
 #define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_is_sleep(c)	((c)->state & MMC_STATE_SLEEP)
 
 #define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
 #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
@@ -393,7 +395,9 @@
 #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
 #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_sleep(c)	((c)->state |= MMC_STATE_SLEEP)
 
+#define mmc_card_clr_sleep(c)	((c)->state &= ~MMC_STATE_SLEEP)
 /*
  * Quirk add/remove for MMC products.
  */