| /* |
| * PowerPC64 SLB support. |
| * |
| * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM |
| * Based on earlier code writteh by: |
| * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com |
| * Copyright (c) 2001 Dave Engebretsen |
| * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM |
| * |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/config.h> |
| #include <asm/pgtable.h> |
| #include <asm/mmu.h> |
| #include <asm/mmu_context.h> |
| #include <asm/paca.h> |
| #include <asm/cputable.h> |
| #include <asm/cacheflush.h> |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| extern void slb_allocate_realmode(unsigned long ea); |
| extern void slb_allocate_user(unsigned long ea); |
| |
| static void slb_allocate(unsigned long ea) |
| { |
| /* Currently, we do real mode for all SLBs including user, but |
| * that will change if we bring back dynamic VSIDs |
| */ |
| slb_allocate_realmode(ea); |
| } |
| |
| static inline unsigned long mk_esid_data(unsigned long ea, unsigned long slot) |
| { |
| return (ea & ESID_MASK) | SLB_ESID_V | slot; |
| } |
| |
| static inline unsigned long mk_vsid_data(unsigned long ea, unsigned long flags) |
| { |
| return (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | flags; |
| } |
| |
| static inline void create_slbe(unsigned long ea, unsigned long flags, |
| unsigned long entry) |
| { |
| asm volatile("slbmte %0,%1" : |
| : "r" (mk_vsid_data(ea, flags)), |
| "r" (mk_esid_data(ea, entry)) |
| : "memory" ); |
| } |
| |
| static void slb_flush_and_rebolt(void) |
| { |
| /* If you change this make sure you change SLB_NUM_BOLTED |
| * appropriately too. */ |
| unsigned long linear_llp, virtual_llp, lflags, vflags; |
| unsigned long ksp_esid_data; |
| |
| WARN_ON(!irqs_disabled()); |
| |
| linear_llp = mmu_psize_defs[mmu_linear_psize].sllp; |
| virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp; |
| lflags = SLB_VSID_KERNEL | linear_llp; |
| vflags = SLB_VSID_KERNEL | virtual_llp; |
| |
| ksp_esid_data = mk_esid_data(get_paca()->kstack, 2); |
| if ((ksp_esid_data & ESID_MASK) == PAGE_OFFSET) |
| ksp_esid_data &= ~SLB_ESID_V; |
| |
| /* We need to do this all in asm, so we're sure we don't touch |
| * the stack between the slbia and rebolting it. */ |
| asm volatile("isync\n" |
| "slbia\n" |
| /* Slot 1 - first VMALLOC segment */ |
| "slbmte %0,%1\n" |
| /* Slot 2 - kernel stack */ |
| "slbmte %2,%3\n" |
| "isync" |
| :: "r"(mk_vsid_data(VMALLOC_START, vflags)), |
| "r"(mk_esid_data(VMALLOC_START, 1)), |
| "r"(mk_vsid_data(ksp_esid_data, lflags)), |
| "r"(ksp_esid_data) |
| : "memory"); |
| } |
| |
| /* Flush all user entries from the segment table of the current processor. */ |
| void switch_slb(struct task_struct *tsk, struct mm_struct *mm) |
| { |
| unsigned long offset = get_paca()->slb_cache_ptr; |
| unsigned long esid_data = 0; |
| unsigned long pc = KSTK_EIP(tsk); |
| unsigned long stack = KSTK_ESP(tsk); |
| unsigned long unmapped_base; |
| |
| if (offset <= SLB_CACHE_ENTRIES) { |
| int i; |
| asm volatile("isync" : : : "memory"); |
| for (i = 0; i < offset; i++) { |
| esid_data = ((unsigned long)get_paca()->slb_cache[i] |
| << SID_SHIFT) | SLBIE_C; |
| asm volatile("slbie %0" : : "r" (esid_data)); |
| } |
| asm volatile("isync" : : : "memory"); |
| } else { |
| slb_flush_and_rebolt(); |
| } |
| |
| /* Workaround POWER5 < DD2.1 issue */ |
| if (offset == 1 || offset > SLB_CACHE_ENTRIES) |
| asm volatile("slbie %0" : : "r" (esid_data)); |
| |
| get_paca()->slb_cache_ptr = 0; |
| get_paca()->context = mm->context; |
| #ifdef CONFIG_PPC_64K_PAGES |
| get_paca()->pgdir = mm->pgd; |
| #endif /* CONFIG_PPC_64K_PAGES */ |
| |
| /* |
| * preload some userspace segments into the SLB. |
| */ |
| if (test_tsk_thread_flag(tsk, TIF_32BIT)) |
| unmapped_base = TASK_UNMAPPED_BASE_USER32; |
| else |
| unmapped_base = TASK_UNMAPPED_BASE_USER64; |
| |
| if (is_kernel_addr(pc)) |
| return; |
| slb_allocate(pc); |
| |
| if (GET_ESID(pc) == GET_ESID(stack)) |
| return; |
| |
| if (is_kernel_addr(stack)) |
| return; |
| slb_allocate(stack); |
| |
| if ((GET_ESID(pc) == GET_ESID(unmapped_base)) |
| || (GET_ESID(stack) == GET_ESID(unmapped_base))) |
| return; |
| |
| if (is_kernel_addr(unmapped_base)) |
| return; |
| slb_allocate(unmapped_base); |
| } |
| |
| static inline void patch_slb_encoding(unsigned int *insn_addr, |
| unsigned int immed) |
| { |
| /* Assume the instruction had a "0" immediate value, just |
| * "or" in the new value |
| */ |
| *insn_addr |= immed; |
| flush_icache_range((unsigned long)insn_addr, 4+ |
| (unsigned long)insn_addr); |
| } |
| |
| void slb_initialize(void) |
| { |
| unsigned long linear_llp, virtual_llp; |
| static int slb_encoding_inited; |
| extern unsigned int *slb_miss_kernel_load_linear; |
| extern unsigned int *slb_miss_kernel_load_virtual; |
| extern unsigned int *slb_miss_user_load_normal; |
| #ifdef CONFIG_HUGETLB_PAGE |
| extern unsigned int *slb_miss_user_load_huge; |
| unsigned long huge_llp; |
| |
| huge_llp = mmu_psize_defs[mmu_huge_psize].sllp; |
| #endif |
| |
| /* Prepare our SLB miss handler based on our page size */ |
| linear_llp = mmu_psize_defs[mmu_linear_psize].sllp; |
| virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp; |
| if (!slb_encoding_inited) { |
| slb_encoding_inited = 1; |
| patch_slb_encoding(slb_miss_kernel_load_linear, |
| SLB_VSID_KERNEL | linear_llp); |
| patch_slb_encoding(slb_miss_kernel_load_virtual, |
| SLB_VSID_KERNEL | virtual_llp); |
| patch_slb_encoding(slb_miss_user_load_normal, |
| SLB_VSID_USER | virtual_llp); |
| |
| DBG("SLB: linear LLP = %04x\n", linear_llp); |
| DBG("SLB: virtual LLP = %04x\n", virtual_llp); |
| #ifdef CONFIG_HUGETLB_PAGE |
| patch_slb_encoding(slb_miss_user_load_huge, |
| SLB_VSID_USER | huge_llp); |
| DBG("SLB: huge LLP = %04x\n", huge_llp); |
| #endif |
| } |
| |
| /* On iSeries the bolted entries have already been set up by |
| * the hypervisor from the lparMap data in head.S */ |
| #ifndef CONFIG_PPC_ISERIES |
| { |
| unsigned long lflags, vflags; |
| |
| lflags = SLB_VSID_KERNEL | linear_llp; |
| vflags = SLB_VSID_KERNEL | virtual_llp; |
| |
| /* Invalidate the entire SLB (even slot 0) & all the ERATS */ |
| asm volatile("isync":::"memory"); |
| asm volatile("slbmte %0,%0"::"r" (0) : "memory"); |
| asm volatile("isync; slbia; isync":::"memory"); |
| create_slbe(PAGE_OFFSET, lflags, 0); |
| |
| /* VMALLOC space has 4K pages always for now */ |
| create_slbe(VMALLOC_START, vflags, 1); |
| |
| /* We don't bolt the stack for the time being - we're in boot, |
| * so the stack is in the bolted segment. By the time it goes |
| * elsewhere, we'll call _switch() which will bolt in the new |
| * one. */ |
| asm volatile("isync":::"memory"); |
| } |
| #endif /* CONFIG_PPC_ISERIES */ |
| |
| get_paca()->stab_rr = SLB_NUM_BOLTED; |
| } |