arch/arm/mach-msm/board-8064-storage.c - fp2-dev/kernel/msm - Gitiles

 /* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  */

 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/bootmem.h>
 #include <asm/mach-types.h>
 #include <asm/mach/mmc.h>
 #include <mach/msm_bus_board.h>
 #include <mach/board.h>
 #include <mach/gpiomux.h>
 #include "devices.h"
 #include "board-8064.h"
 #include "board-storage-common-a.h"


 /* APQ8064 has 4 SDCC controllers */
 enum sdcc_controllers {
 	SDCC1,
 	SDCC2,
 	SDCC3,
 	SDCC4,
 	MAX_SDCC_CONTROLLER
 };

 /* All SDCC controllers require VDD/VCC voltage */
 static struct msm_mmc_reg_data mmc_vdd_reg_data[MAX_SDCC_CONTROLLER] = {
 	/* SDCC1 : eMMC card connected */
 	[SDCC1] = {
 		.name = "sdc_vdd",
 		.high_vol_level = 2950000,
 		.low_vol_level = 2950000,
 		.always_on = 1,
 		.lpm_sup = 1,
 		.lpm_uA = 9000,
 		.hpm_uA = 200000, /* 200mA */
 	},
 	/* SDCC3 : External card slot connected */
 	[SDCC3] = {
 		.name = "sdc_vdd",
 		.high_vol_level = 2950000,
 		.low_vol_level = 2950000,
 		.hpm_uA = 800000, /* 800mA */
 	}
 };

 /* SDCC controllers may require voting for VDD IO voltage */
 static struct msm_mmc_reg_data mmc_vdd_io_reg_data[MAX_SDCC_CONTROLLER] = {
 	/* SDCC1 : eMMC card connected */
 	[SDCC1] = {
 		.name = "sdc_vdd_io",
 		.always_on = 1,
 		.high_vol_level = 1800000,
 		.low_vol_level = 1800000,
 		.hpm_uA = 200000, /* 200mA */
 	},
 	/* SDCC3 : External card slot connected */
 	[SDCC3] = {
 		.name = "sdc_vdd_io",
 		.high_vol_level = 2950000,
 		.low_vol_level = 1850000,
 		.always_on = 1,
 		.lpm_sup = 1,
 		/* Max. Active current required is 16 mA */
 		.hpm_uA = 16000,
 		/*
 		 * Sleep current required is ~300 uA. But min. vote can be
 		 * in terms of mA (min. 1 mA). So let's vote for 2 mA
 		 * during sleep.
 		 */
 		.lpm_uA = 2000,
 	}
 };

 static struct msm_mmc_slot_reg_data mmc_slot_vreg_data[MAX_SDCC_CONTROLLER] = {
 	/* SDCC1 : eMMC card connected */
 	[SDCC1] = {
 		.vdd_data = &mmc_vdd_reg_data[SDCC1],
 		.vdd_io_data = &mmc_vdd_io_reg_data[SDCC1],
 	},
 	/* SDCC3 : External card slot connected */
 	[SDCC3] = {
 		.vdd_data = &mmc_vdd_reg_data[SDCC3],
 		.vdd_io_data = &mmc_vdd_io_reg_data[SDCC3],
 	}
 };

 /* SDC1 pad data */
 static struct msm_mmc_pad_drv sdc1_pad_drv_on_cfg[] = {
 	{TLMM_HDRV_SDC1_CLK, GPIO_CFG_16MA},
 	{TLMM_HDRV_SDC1_CMD, GPIO_CFG_10MA},
 	{TLMM_HDRV_SDC1_DATA, GPIO_CFG_10MA}
 };

 static struct msm_mmc_pad_drv sdc1_pad_drv_off_cfg[] = {
 	{TLMM_HDRV_SDC1_CLK, GPIO_CFG_2MA},
 	{TLMM_HDRV_SDC1_CMD, GPIO_CFG_2MA},
 	{TLMM_HDRV_SDC1_DATA, GPIO_CFG_2MA}
 };

 static struct msm_mmc_pad_pull sdc1_pad_pull_on_cfg[] = {
 	{TLMM_PULL_SDC1_CLK, GPIO_CFG_NO_PULL},
 	{TLMM_PULL_SDC1_CMD, GPIO_CFG_PULL_UP},
 	{TLMM_PULL_SDC1_DATA, GPIO_CFG_PULL_UP}
 };

 static struct msm_mmc_pad_pull sdc1_pad_pull_off_cfg[] = {
 	{TLMM_PULL_SDC1_CLK, GPIO_CFG_NO_PULL},
 	{TLMM_PULL_SDC1_CMD, GPIO_CFG_PULL_UP},
 	{TLMM_PULL_SDC1_DATA, GPIO_CFG_PULL_UP}
 };

 /* SDC3 pad data */
 static struct msm_mmc_pad_drv sdc3_pad_drv_on_cfg[] = {
 	{TLMM_HDRV_SDC3_CLK, GPIO_CFG_8MA},
 	{TLMM_HDRV_SDC3_CMD, GPIO_CFG_8MA},
 	{TLMM_HDRV_SDC3_DATA, GPIO_CFG_8MA}
 };

 static struct msm_mmc_pad_drv sdc3_pad_drv_off_cfg[] = {
 	{TLMM_HDRV_SDC3_CLK, GPIO_CFG_2MA},
 	{TLMM_HDRV_SDC3_CMD, GPIO_CFG_2MA},
 	{TLMM_HDRV_SDC3_DATA, GPIO_CFG_2MA}
 };

 static struct msm_mmc_pad_pull sdc3_pad_pull_on_cfg[] = {
 	{TLMM_PULL_SDC3_CLK, GPIO_CFG_NO_PULL},
 	{TLMM_PULL_SDC3_CMD, GPIO_CFG_PULL_UP},
 	{TLMM_PULL_SDC3_DATA, GPIO_CFG_PULL_UP}
 };

 static struct msm_mmc_pad_pull sdc3_pad_pull_off_cfg[] = {
 	{TLMM_PULL_SDC3_CLK, GPIO_CFG_NO_PULL},
 	{TLMM_PULL_SDC3_CMD, GPIO_CFG_PULL_UP},
 	{TLMM_PULL_SDC3_DATA, GPIO_CFG_PULL_UP}
 };

 static struct msm_mmc_pad_pull_data mmc_pad_pull_data[MAX_SDCC_CONTROLLER] = {
 	[SDCC1] = {
 		.on = sdc1_pad_pull_on_cfg,
 		.off = sdc1_pad_pull_off_cfg,
 		.size = ARRAY_SIZE(sdc1_pad_pull_on_cfg)
 	},
 	[SDCC3] = {
 		.on = sdc3_pad_pull_on_cfg,
 		.off = sdc3_pad_pull_off_cfg,
 		.size = ARRAY_SIZE(sdc3_pad_pull_on_cfg)
 	},
 };

 static struct msm_mmc_pad_drv_data mmc_pad_drv_data[MAX_SDCC_CONTROLLER] = {
 	[SDCC1] = {
 		.on = sdc1_pad_drv_on_cfg,
 		.off = sdc1_pad_drv_off_cfg,
 		.size = ARRAY_SIZE(sdc1_pad_drv_on_cfg)
 	},
 	[SDCC3] = {
 		.on = sdc3_pad_drv_on_cfg,
 		.off = sdc3_pad_drv_off_cfg,
 		.size = ARRAY_SIZE(sdc3_pad_drv_on_cfg)
 	},
 };

 static struct msm_mmc_pad_data mmc_pad_data[MAX_SDCC_CONTROLLER] = {
 	[SDCC1] = {
 		.pull = &mmc_pad_pull_data[SDCC1],
 		.drv = &mmc_pad_drv_data[SDCC1]
 	},
 	[SDCC3] = {
 		.pull = &mmc_pad_pull_data[SDCC3],
 		.drv = &mmc_pad_drv_data[SDCC3]
 	},
 };

 static struct msm_mmc_gpio sdc2_gpio[] = {
 	{59, "sdc2_clk"},
 	{57, "sdc2_cmd"},
 	{62, "sdc2_dat_0"},
 	{61, "sdc2_dat_1"},
 	{60, "sdc2_dat_2"},
 	{58, "sdc2_dat_3"},
 };

 static struct msm_mmc_gpio sdc4_gpio[] = {
 	{68, "sdc4_clk"},
 	{67, "sdc4_cmd"},
 	{66, "sdc4_dat_0"},
 	{65, "sdc4_dat_1"},
 	{64, "sdc4_dat_2"},
 	{63, "sdc4_dat_3"},
 };

 static struct msm_mmc_gpio_data mmc_gpio_data[MAX_SDCC_CONTROLLER] = {
 	[SDCC2] = {
 		.gpio = sdc2_gpio,
 		.size = ARRAY_SIZE(sdc2_gpio),
 	},
 	[SDCC4] = {
 		.gpio = sdc4_gpio,
 		.size = ARRAY_SIZE(sdc4_gpio),
 	}
 };

 static struct msm_mmc_pin_data mmc_slot_pin_data[MAX_SDCC_CONTROLLER] = {
 	[SDCC1] = {
 		.pad_data = &mmc_pad_data[SDCC1],
 	},
 	[SDCC2] = {
 		.is_gpio = 1,
 		.gpio_data = &mmc_gpio_data[SDCC2],
 	},
 	[SDCC3] = {
 		.pad_data = &mmc_pad_data[SDCC3],
 	},
 	[SDCC4] = {
 		.is_gpio = 1,
 		.gpio_data = &mmc_gpio_data[SDCC4],
 	},
 };

 #define MSM_MPM_PIN_SDC1_DAT1	17
 #define MSM_MPM_PIN_SDC3_DAT1	21

 #ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
 static unsigned int sdc1_sup_clk_rates[] = {
 	400000, 24000000, 48000000, 96000000
 };

 static struct mmc_platform_data sdc1_data = {
 	.ocr_mask       = MMC_VDD_27_28 | MMC_VDD_28_29,
 #ifdef CONFIG_MMC_MSM_SDC1_8_BIT_SUPPORT
 	.mmc_bus_width  = MMC_CAP_8_BIT_DATA,
 #else
 	.mmc_bus_width  = MMC_CAP_4_BIT_DATA,
 #endif
 	.sup_clk_table	= sdc1_sup_clk_rates,
 	.sup_clk_cnt	= ARRAY_SIZE(sdc1_sup_clk_rates),
 	.nonremovable	= 1,
 	.pin_data	= &mmc_slot_pin_data[SDCC1],
 	.vreg_data	= &mmc_slot_vreg_data[SDCC1],
 	.uhs_caps	= MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50,
 	.uhs_caps2	= MMC_CAP2_HS200_1_8V_SDR,
 	.mpm_sdiowakeup_int = MSM_MPM_PIN_SDC1_DAT1,
 	.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
 };
 static struct mmc_platform_data *apq8064_sdc1_pdata = &sdc1_data;
 #else
 static struct mmc_platform_data *apq8064_sdc1_pdata;
 #endif

 #ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
 static unsigned int sdc2_sup_clk_rates[] = {
 	400000, 24000000, 48000000
 };

 static struct mmc_platform_data sdc2_data = {
 	.ocr_mask       = MMC_VDD_27_28 | MMC_VDD_28_29,
 	.mmc_bus_width  = MMC_CAP_4_BIT_DATA,
 	.sup_clk_table	= sdc2_sup_clk_rates,
 	.sup_clk_cnt	= ARRAY_SIZE(sdc2_sup_clk_rates),
 	.pin_data	= &mmc_slot_pin_data[SDCC2],
 	.sdiowakeup_irq = MSM_GPIO_TO_INT(61),
 	.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
 };
 static struct mmc_platform_data *apq8064_sdc2_pdata = &sdc2_data;
 #else
 static struct mmc_platform_data *apq8064_sdc2_pdata;
 #endif

 #ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
 static unsigned int sdc3_sup_clk_rates[] = {
 	400000, 24000000, 48000000, 96000000, 192000000
 };

 static struct mmc_platform_data sdc3_data = {
 	.ocr_mask       = MMC_VDD_27_28 | MMC_VDD_28_29,
 	.mmc_bus_width  = MMC_CAP_4_BIT_DATA,
 	.sup_clk_table	= sdc3_sup_clk_rates,
 	.sup_clk_cnt	= ARRAY_SIZE(sdc3_sup_clk_rates),
 	.pin_data	= &mmc_slot_pin_data[SDCC3],
 	.vreg_data	= &mmc_slot_vreg_data[SDCC3],
 	.wpswitch_gpio	= PM8921_GPIO_PM_TO_SYS(17),
 	.is_wpswitch_active_low = true,
 	.status_gpio	= 26,
 	.status_irq	= MSM_GPIO_TO_INT(26),
 	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 	.is_status_gpio_active_low = 1,
 	.xpc_cap	= 1,
 	.uhs_caps	= (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
 			MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50 |
 			MMC_CAP_UHS_SDR104 | MMC_CAP_MAX_CURRENT_800),
 	.mpm_sdiowakeup_int = MSM_MPM_PIN_SDC3_DAT1,
 	.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
 };
 static struct mmc_platform_data *apq8064_sdc3_pdata = &sdc3_data;
 #else
 static struct mmc_platform_data *apq8064_sdc3_pdata;
 #endif


 #ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
 static unsigned int sdc4_sup_clk_rates[] = {
 	400000, 24000000, 48000000
 };

 static struct mmc_platform_data sdc4_data = {
 	.ocr_mask       = MMC_VDD_27_28 | MMC_VDD_28_29,
 	.mmc_bus_width  = MMC_CAP_4_BIT_DATA,
 	.sup_clk_table	= sdc4_sup_clk_rates,
 	.sup_clk_cnt	= ARRAY_SIZE(sdc4_sup_clk_rates),
 	.pin_data	= &mmc_slot_pin_data[SDCC4],
 	.sdiowakeup_irq = MSM_GPIO_TO_INT(65),
 	.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
 };
 static struct mmc_platform_data *apq8064_sdc4_pdata = &sdc4_data;
 #else
 static struct mmc_platform_data *apq8064_sdc4_pdata;
 #endif

 void __init apq8064_init_mmc(void)
 {
 	if (apq8064_sdc1_pdata)
 		apq8064_add_sdcc(1, apq8064_sdc1_pdata);

 	if (apq8064_sdc2_pdata)
 		apq8064_add_sdcc(2, apq8064_sdc2_pdata);

 	if (apq8064_sdc3_pdata) {
 		if (machine_is_mpq8064_hrd() || machine_is_mpq8064_dtv()) {
 			apq8064_sdc3_pdata->uhs_caps &= ~(MMC_CAP_UHS_SDR12 |
 				MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_DDR50 |
 				MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104);
 		}
 		if (!machine_is_apq8064_cdp()) {
 			apq8064_sdc3_pdata->wpswitch_gpio = 0;
 			apq8064_sdc3_pdata->is_wpswitch_active_low = false;
 		}
 		if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
 			machine_is_mpq8064_dtv()) {
 			int rc;
 			struct pm_gpio sd_card_det_init_cfg = {
 				.direction      = PM_GPIO_DIR_IN,
 				.output_buffer  = PM_GPIO_OUT_BUF_CMOS,
 				.pull           = PM_GPIO_PULL_UP_30,
 				.vin_sel        = PM_GPIO_VIN_S4,
 				.out_strength   = PM_GPIO_STRENGTH_NO,
 				.function       = PM_GPIO_FUNC_NORMAL,
 			};

 			apq8064_sdc3_pdata->status_gpio =
 				PM8921_GPIO_PM_TO_SYS(31);
 			apq8064_sdc3_pdata->status_irq =
 				PM8921_GPIO_IRQ(PM8921_IRQ_BASE, 31);
 			rc = pm8xxx_gpio_config(apq8064_sdc3_pdata->status_gpio,
 					&sd_card_det_init_cfg);
 			if (rc) {
 				pr_info("%s: SD_CARD_DET GPIO%d config "
 					"failed(%d)\n", __func__,
 					apq8064_sdc3_pdata->status_gpio, rc);
 				apq8064_sdc3_pdata->status_gpio = 0;
 				apq8064_sdc3_pdata->status_irq = 0;
 			}
 		}
 		if (machine_is_apq8064_cdp()) {
 			int i;

 			for (i = 0;
 			     i < apq8064_sdc3_pdata->pin_data->pad_data->\
 				 drv->size;
 			     i++)
 				apq8064_sdc3_pdata->pin_data->pad_data->\
 					drv->on[i].val = GPIO_CFG_10MA;
 		}
 		if (machine_is_mpq8064_hrd() || machine_is_mpq8064_dtv()) {
 			apq8064_sdc3_pdata->pin_data->pad_data->\
 				drv->on[0].val = GPIO_CFG_16MA;
 			apq8064_sdc3_pdata->pin_data->pad_data->\
 				drv->on[1].val = GPIO_CFG_10MA;
 			apq8064_sdc3_pdata->pin_data->pad_data->\
 				drv->on[2].val = GPIO_CFG_10MA;
 		}
 		apq8064_add_sdcc(3, apq8064_sdc3_pdata);
 	}

 	if (apq8064_sdc4_pdata)
 		apq8064_add_sdcc(4, apq8064_sdc4_pdata);
 }
	/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	*/

	#include <linux/init.h>
	#include <linux/ioport.h>
	#include <linux/platform_device.h>
	#include <linux/gpio.h>
	#include <linux/bootmem.h>
	#include <asm/mach-types.h>
	#include <asm/mach/mmc.h>
	#include <mach/msm_bus_board.h>
	#include <mach/board.h>
	#include <mach/gpiomux.h>
	#include "devices.h"
	#include "board-8064.h"
	#include "board-storage-common-a.h"


	/* APQ8064 has 4 SDCC controllers */
	enum sdcc_controllers {
	SDCC1,
	SDCC2,
	SDCC3,
	SDCC4,
	MAX_SDCC_CONTROLLER
	};

	/* All SDCC controllers require VDD/VCC voltage */
	static struct msm_mmc_reg_data mmc_vdd_reg_data[MAX_SDCC_CONTROLLER] = {
	/* SDCC1 : eMMC card connected */
	[SDCC1] = {
	.name = "sdc_vdd",
	.high_vol_level = 2950000,
	.low_vol_level = 2950000,
	.always_on = 1,
	.lpm_sup = 1,
	.lpm_uA = 9000,
	.hpm_uA = 200000, /* 200mA */
	},
	/* SDCC3 : External card slot connected */
	[SDCC3] = {
	.name = "sdc_vdd",
	.high_vol_level = 2950000,
	.low_vol_level = 2950000,
	.hpm_uA = 800000, /* 800mA */
	}
	};

	/* SDCC controllers may require voting for VDD IO voltage */
	static struct msm_mmc_reg_data mmc_vdd_io_reg_data[MAX_SDCC_CONTROLLER] = {
	/* SDCC1 : eMMC card connected */
	[SDCC1] = {
	.name = "sdc_vdd_io",
	.always_on = 1,
	.high_vol_level = 1800000,
	.low_vol_level = 1800000,
	.hpm_uA = 200000, /* 200mA */
	},
	/* SDCC3 : External card slot connected */
	[SDCC3] = {
	.name = "sdc_vdd_io",
	.high_vol_level = 2950000,
	.low_vol_level = 1850000,
	.always_on = 1,
	.lpm_sup = 1,
	/* Max. Active current required is 16 mA */
	.hpm_uA = 16000,
	/*
	* Sleep current required is ~300 uA. But min. vote can be
	* in terms of mA (min. 1 mA). So let's vote for 2 mA
	* during sleep.
	*/
	.lpm_uA = 2000,
	}
	};

	static struct msm_mmc_slot_reg_data mmc_slot_vreg_data[MAX_SDCC_CONTROLLER] = {
	/* SDCC1 : eMMC card connected */
	[SDCC1] = {
	.vdd_data = &mmc_vdd_reg_data[SDCC1],
	.vdd_io_data = &mmc_vdd_io_reg_data[SDCC1],
	},
	/* SDCC3 : External card slot connected */
	[SDCC3] = {
	.vdd_data = &mmc_vdd_reg_data[SDCC3],
	.vdd_io_data = &mmc_vdd_io_reg_data[SDCC3],
	}
	};

	/* SDC1 pad data */
	static struct msm_mmc_pad_drv sdc1_pad_drv_on_cfg[] = {
	{TLMM_HDRV_SDC1_CLK, GPIO_CFG_16MA},
	{TLMM_HDRV_SDC1_CMD, GPIO_CFG_10MA},
	{TLMM_HDRV_SDC1_DATA, GPIO_CFG_10MA}
	};

	static struct msm_mmc_pad_drv sdc1_pad_drv_off_cfg[] = {
	{TLMM_HDRV_SDC1_CLK, GPIO_CFG_2MA},
	{TLMM_HDRV_SDC1_CMD, GPIO_CFG_2MA},
	{TLMM_HDRV_SDC1_DATA, GPIO_CFG_2MA}
	};

	static struct msm_mmc_pad_pull sdc1_pad_pull_on_cfg[] = {
	{TLMM_PULL_SDC1_CLK, GPIO_CFG_NO_PULL},
	{TLMM_PULL_SDC1_CMD, GPIO_CFG_PULL_UP},
	{TLMM_PULL_SDC1_DATA, GPIO_CFG_PULL_UP}
	};

	static struct msm_mmc_pad_pull sdc1_pad_pull_off_cfg[] = {
	{TLMM_PULL_SDC1_CLK, GPIO_CFG_NO_PULL},
	{TLMM_PULL_SDC1_CMD, GPIO_CFG_PULL_UP},
	{TLMM_PULL_SDC1_DATA, GPIO_CFG_PULL_UP}
	};

	/* SDC3 pad data */
	static struct msm_mmc_pad_drv sdc3_pad_drv_on_cfg[] = {
	{TLMM_HDRV_SDC3_CLK, GPIO_CFG_8MA},
	{TLMM_HDRV_SDC3_CMD, GPIO_CFG_8MA},
	{TLMM_HDRV_SDC3_DATA, GPIO_CFG_8MA}
	};

	static struct msm_mmc_pad_drv sdc3_pad_drv_off_cfg[] = {
	{TLMM_HDRV_SDC3_CLK, GPIO_CFG_2MA},
	{TLMM_HDRV_SDC3_CMD, GPIO_CFG_2MA},
	{TLMM_HDRV_SDC3_DATA, GPIO_CFG_2MA}
	};

	static struct msm_mmc_pad_pull sdc3_pad_pull_on_cfg[] = {
	{TLMM_PULL_SDC3_CLK, GPIO_CFG_NO_PULL},
	{TLMM_PULL_SDC3_CMD, GPIO_CFG_PULL_UP},
	{TLMM_PULL_SDC3_DATA, GPIO_CFG_PULL_UP}
	};

	static struct msm_mmc_pad_pull sdc3_pad_pull_off_cfg[] = {
	{TLMM_PULL_SDC3_CLK, GPIO_CFG_NO_PULL},
	{TLMM_PULL_SDC3_CMD, GPIO_CFG_PULL_UP},
	{TLMM_PULL_SDC3_DATA, GPIO_CFG_PULL_UP}
	};

	static struct msm_mmc_pad_pull_data mmc_pad_pull_data[MAX_SDCC_CONTROLLER] = {
	[SDCC1] = {
	.on = sdc1_pad_pull_on_cfg,
	.off = sdc1_pad_pull_off_cfg,
	.size = ARRAY_SIZE(sdc1_pad_pull_on_cfg)
	},
	[SDCC3] = {
	.on = sdc3_pad_pull_on_cfg,
	.off = sdc3_pad_pull_off_cfg,
	.size = ARRAY_SIZE(sdc3_pad_pull_on_cfg)
	},
	};

	static struct msm_mmc_pad_drv_data mmc_pad_drv_data[MAX_SDCC_CONTROLLER] = {
	[SDCC1] = {
	.on = sdc1_pad_drv_on_cfg,
	.off = sdc1_pad_drv_off_cfg,
	.size = ARRAY_SIZE(sdc1_pad_drv_on_cfg)
	},
	[SDCC3] = {
	.on = sdc3_pad_drv_on_cfg,
	.off = sdc3_pad_drv_off_cfg,
	.size = ARRAY_SIZE(sdc3_pad_drv_on_cfg)
	},
	};

	static struct msm_mmc_pad_data mmc_pad_data[MAX_SDCC_CONTROLLER] = {
	[SDCC1] = {
	.pull = &mmc_pad_pull_data[SDCC1],
	.drv = &mmc_pad_drv_data[SDCC1]
	},
	[SDCC3] = {
	.pull = &mmc_pad_pull_data[SDCC3],
	.drv = &mmc_pad_drv_data[SDCC3]
	},
	};

	static struct msm_mmc_gpio sdc2_gpio[] = {
	{59, "sdc2_clk"},
	{57, "sdc2_cmd"},
	{62, "sdc2_dat_0"},
	{61, "sdc2_dat_1"},
	{60, "sdc2_dat_2"},
	{58, "sdc2_dat_3"},
	};

	static struct msm_mmc_gpio sdc4_gpio[] = {
	{68, "sdc4_clk"},
	{67, "sdc4_cmd"},
	{66, "sdc4_dat_0"},
	{65, "sdc4_dat_1"},
	{64, "sdc4_dat_2"},
	{63, "sdc4_dat_3"},
	};

	static struct msm_mmc_gpio_data mmc_gpio_data[MAX_SDCC_CONTROLLER] = {
	[SDCC2] = {
	.gpio = sdc2_gpio,
	.size = ARRAY_SIZE(sdc2_gpio),
	},
	[SDCC4] = {
	.gpio = sdc4_gpio,
	.size = ARRAY_SIZE(sdc4_gpio),
	}
	};

	static struct msm_mmc_pin_data mmc_slot_pin_data[MAX_SDCC_CONTROLLER] = {
	[SDCC1] = {
	.pad_data = &mmc_pad_data[SDCC1],
	},
	[SDCC2] = {
	.is_gpio = 1,
	.gpio_data = &mmc_gpio_data[SDCC2],
	},
	[SDCC3] = {
	.pad_data = &mmc_pad_data[SDCC3],
	},
	[SDCC4] = {
	.is_gpio = 1,
	.gpio_data = &mmc_gpio_data[SDCC4],
	},
	};

	#define MSM_MPM_PIN_SDC1_DAT1 17
	#define MSM_MPM_PIN_SDC3_DAT1 21

	#ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
	static unsigned int sdc1_sup_clk_rates[] = {
	400000, 24000000, 48000000, 96000000
	};

	static struct mmc_platform_data sdc1_data = {
	.ocr_mask = MMC_VDD_27_28 \| MMC_VDD_28_29,
	#ifdef CONFIG_MMC_MSM_SDC1_8_BIT_SUPPORT
	.mmc_bus_width = MMC_CAP_8_BIT_DATA,
	#else
	.mmc_bus_width = MMC_CAP_4_BIT_DATA,
	#endif
	.sup_clk_table = sdc1_sup_clk_rates,
	.sup_clk_cnt = ARRAY_SIZE(sdc1_sup_clk_rates),
	.nonremovable = 1,
	.pin_data = &mmc_slot_pin_data[SDCC1],
	.vreg_data = &mmc_slot_vreg_data[SDCC1],
	.uhs_caps = MMC_CAP_1_8V_DDR \| MMC_CAP_UHS_DDR50,
	.uhs_caps2 = MMC_CAP2_HS200_1_8V_SDR,
	.mpm_sdiowakeup_int = MSM_MPM_PIN_SDC1_DAT1,
	.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
	};
	static struct mmc_platform_data *apq8064_sdc1_pdata = &sdc1_data;
	#else
	static struct mmc_platform_data *apq8064_sdc1_pdata;
	#endif

	#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
	static unsigned int sdc2_sup_clk_rates[] = {
	400000, 24000000, 48000000
	};

	static struct mmc_platform_data sdc2_data = {
	.ocr_mask = MMC_VDD_27_28 \| MMC_VDD_28_29,
	.mmc_bus_width = MMC_CAP_4_BIT_DATA,
	.sup_clk_table = sdc2_sup_clk_rates,
	.sup_clk_cnt = ARRAY_SIZE(sdc2_sup_clk_rates),
	.pin_data = &mmc_slot_pin_data[SDCC2],
	.sdiowakeup_irq = MSM_GPIO_TO_INT(61),
	.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
	};
	static struct mmc_platform_data *apq8064_sdc2_pdata = &sdc2_data;
	#else
	static struct mmc_platform_data *apq8064_sdc2_pdata;
	#endif

	#ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
	static unsigned int sdc3_sup_clk_rates[] = {
	400000, 24000000, 48000000, 96000000, 192000000
	};

	static struct mmc_platform_data sdc3_data = {
	.ocr_mask = MMC_VDD_27_28 \| MMC_VDD_28_29,
	.mmc_bus_width = MMC_CAP_4_BIT_DATA,
	.sup_clk_table = sdc3_sup_clk_rates,
	.sup_clk_cnt = ARRAY_SIZE(sdc3_sup_clk_rates),
	.pin_data = &mmc_slot_pin_data[SDCC3],
	.vreg_data = &mmc_slot_vreg_data[SDCC3],
	.wpswitch_gpio = PM8921_GPIO_PM_TO_SYS(17),
	.is_wpswitch_active_low = true,
	.status_gpio = 26,
	.status_irq = MSM_GPIO_TO_INT(26),
	.irq_flags = IRQF_TRIGGER_RISING \| IRQF_TRIGGER_FALLING,
	.is_status_gpio_active_low = 1,
	.xpc_cap = 1,
	.uhs_caps = (MMC_CAP_UHS_SDR12 \| MMC_CAP_UHS_SDR25 \|
	MMC_CAP_UHS_SDR50 \| MMC_CAP_UHS_DDR50 \|
	MMC_CAP_UHS_SDR104 \| MMC_CAP_MAX_CURRENT_800),
	.mpm_sdiowakeup_int = MSM_MPM_PIN_SDC3_DAT1,
	.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
	};
	static struct mmc_platform_data *apq8064_sdc3_pdata = &sdc3_data;
	#else
	static struct mmc_platform_data *apq8064_sdc3_pdata;
	#endif


	#ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
	static unsigned int sdc4_sup_clk_rates[] = {
	400000, 24000000, 48000000
	};

	static struct mmc_platform_data sdc4_data = {
	.ocr_mask = MMC_VDD_27_28 \| MMC_VDD_28_29,
	.mmc_bus_width = MMC_CAP_4_BIT_DATA,
	.sup_clk_table = sdc4_sup_clk_rates,
	.sup_clk_cnt = ARRAY_SIZE(sdc4_sup_clk_rates),
	.pin_data = &mmc_slot_pin_data[SDCC4],
	.sdiowakeup_irq = MSM_GPIO_TO_INT(65),
	.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
	};
	static struct mmc_platform_data *apq8064_sdc4_pdata = &sdc4_data;
	#else
	static struct mmc_platform_data *apq8064_sdc4_pdata;
	#endif

	void __init apq8064_init_mmc(void)
	{
	if (apq8064_sdc1_pdata)
	apq8064_add_sdcc(1, apq8064_sdc1_pdata);

	if (apq8064_sdc2_pdata)
	apq8064_add_sdcc(2, apq8064_sdc2_pdata);

	if (apq8064_sdc3_pdata) {
	if (machine_is_mpq8064_hrd() \|\| machine_is_mpq8064_dtv()) {
	apq8064_sdc3_pdata->uhs_caps &= ~(MMC_CAP_UHS_SDR12 \|
	MMC_CAP_UHS_SDR25 \| MMC_CAP_UHS_DDR50 \|
	MMC_CAP_UHS_SDR50 \| MMC_CAP_UHS_SDR104);
	}
	if (!machine_is_apq8064_cdp()) {
	apq8064_sdc3_pdata->wpswitch_gpio = 0;
	apq8064_sdc3_pdata->is_wpswitch_active_low = false;
	}
	if (machine_is_mpq8064_cdp() \|\| machine_is_mpq8064_hrd() \|\|
	machine_is_mpq8064_dtv()) {
	int rc;
	struct pm_gpio sd_card_det_init_cfg = {
	.direction = PM_GPIO_DIR_IN,
	.output_buffer = PM_GPIO_OUT_BUF_CMOS,
	.pull = PM_GPIO_PULL_UP_30,
	.vin_sel = PM_GPIO_VIN_S4,
	.out_strength = PM_GPIO_STRENGTH_NO,
	.function = PM_GPIO_FUNC_NORMAL,
	};

	apq8064_sdc3_pdata->status_gpio =
	PM8921_GPIO_PM_TO_SYS(31);
	apq8064_sdc3_pdata->status_irq =
	PM8921_GPIO_IRQ(PM8921_IRQ_BASE, 31);
	rc = pm8xxx_gpio_config(apq8064_sdc3_pdata->status_gpio,
	&sd_card_det_init_cfg);
	if (rc) {
	pr_info("%s: SD_CARD_DET GPIO%d config "
	"failed(%d)\n", __func__,
	apq8064_sdc3_pdata->status_gpio, rc);
	apq8064_sdc3_pdata->status_gpio = 0;
	apq8064_sdc3_pdata->status_irq = 0;
	}
	}
	if (machine_is_apq8064_cdp()) {
	int i;

	for (i = 0;
	i < apq8064_sdc3_pdata->pin_data->pad_data->\
	drv->size;
	i++)
	apq8064_sdc3_pdata->pin_data->pad_data->\
	drv->on[i].val = GPIO_CFG_10MA;
	}
	if (machine_is_mpq8064_hrd() \|\| machine_is_mpq8064_dtv()) {
	apq8064_sdc3_pdata->pin_data->pad_data->\
	drv->on[0].val = GPIO_CFG_16MA;
	apq8064_sdc3_pdata->pin_data->pad_data->\
	drv->on[1].val = GPIO_CFG_10MA;
	apq8064_sdc3_pdata->pin_data->pad_data->\
	drv->on[2].val = GPIO_CFG_10MA;
	}
	apq8064_add_sdcc(3, apq8064_sdc3_pdata);
	}

	if (apq8064_sdc4_pdata)
	apq8064_add_sdcc(4, apq8064_sdc4_pdata);
	}