drivers/net/sfc/boards.c - fp2-dev/kernel/msm - Gitiles

 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2007-2008 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation, incorporated herein by reference.
  */

 #include "net_driver.h"
 #include "phy.h"
 #include "boards.h"
 #include "efx.h"
 #include "workarounds.h"

 /* Macros for unpacking the board revision */
 /* The revision info is in host byte order. */
 #define BOARD_TYPE(_rev) (_rev >> 8)
 #define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
 #define BOARD_MINOR(_rev) (_rev & 0xf)

 /* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */
 #define BLINK_INTERVAL (HZ/2)

 static void blink_led_timer(unsigned long context)
 {
 	struct efx_nic *efx = (struct efx_nic *)context;
 	struct efx_blinker *bl = &efx->board_info.blinker;
 	efx->board_info.set_id_led(efx, bl->state);
 	bl->state = !bl->state;
 	if (bl->resubmit)
 		mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
 }

 static void board_blink(struct efx_nic *efx, bool blink)
 {
 	struct efx_blinker *blinker = &efx->board_info.blinker;

 	/* The rtnl mutex serialises all ethtool ioctls, so
 	 * nothing special needs doing here. */
 	if (blink) {
 		blinker->resubmit = true;
 		blinker->state = false;
 		setup_timer(&blinker->timer, blink_led_timer,
 			    (unsigned long)efx);
 		mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
 	} else {
 		blinker->resubmit = false;
 		if (blinker->timer.function)
 			del_timer_sync(&blinker->timer);
 		efx->board_info.init_leds(efx);
 	}
 }

 /*****************************************************************************
  * Support for LM87 sensor chip used on several boards
  */
 #define LM87_REG_ALARMS1		0x41
 #define LM87_REG_ALARMS2		0x42
 #define LM87_IN_LIMITS(nr, _min, _max)			\
 	0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
 #define LM87_AIN_LIMITS(nr, _min, _max)			\
 	0x3B + (nr), _max, 0x1A + (nr), _min
 #define LM87_TEMP_INT_LIMITS(_min, _max)		\
 	0x39, _max, 0x3A, _min
 #define LM87_TEMP_EXT1_LIMITS(_min, _max)		\
 	0x37, _max, 0x38, _min

 #define LM87_ALARM_TEMP_INT		0x10
 #define LM87_ALARM_TEMP_EXT1		0x20

 #if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)

 static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
 			 const u8 *reg_values)
 {
 	struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
 	int rc;

 	if (!client)
 		return -EIO;

 	while (*reg_values) {
 		u8 reg = *reg_values++;
 		u8 value = *reg_values++;
 		rc = i2c_smbus_write_byte_data(client, reg, value);
 		if (rc)
 			goto err;
 	}

 	efx->board_info.hwmon_client = client;
 	return 0;

 err:
 	i2c_unregister_device(client);
 	return rc;
 }

 static void efx_fini_lm87(struct efx_nic *efx)
 {
 	i2c_unregister_device(efx->board_info.hwmon_client);
 }

 static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
 {
 	struct i2c_client *client = efx->board_info.hwmon_client;
 	s32 alarms1, alarms2;

 	/* If link is up then do not monitor temperature */
 	if (EFX_WORKAROUND_7884(efx) && efx->link_up)
 		return 0;

 	alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
 	alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
 	if (alarms1 < 0)
 		return alarms1;
 	if (alarms2 < 0)
 		return alarms2;
 	alarms1 &= mask;
 	alarms2 &= mask >> 8;
 	if (alarms1 || alarms2) {
 		EFX_ERR(efx,
 			"LM87 detected a hardware failure (status %02x:%02x)"
 			"%s%s\n",
 			alarms1, alarms2,
 			(alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
 			(alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
 		return -ERANGE;
 	}

 	return 0;
 }

 #else /* !CONFIG_SENSORS_LM87 */

 static inline int
 efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
 	      const u8 *reg_values)
 {
 	return 0;
 }
 static inline void efx_fini_lm87(struct efx_nic *efx)
 {
 }
 static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
 {
 	return 0;
 }

 #endif /* CONFIG_SENSORS_LM87 */

 /*****************************************************************************
  * Support for the SFE4002
  *
  */
 static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */

 static const u8 sfe4002_lm87_regs[] = {
 	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
 	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
 	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
 	LM87_IN_LIMITS(3, 0xb0, 0xc9),		/* 5V:    4.6-5.2V */
 	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
 	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
 	LM87_AIN_LIMITS(0, 0xa0, 0xb2),		/* AIN1:  1.66V +/- 5% */
 	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
 	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
 	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
 	0
 };

 static struct i2c_board_info sfe4002_hwmon_info = {
 	I2C_BOARD_INFO("lm87", 0x2e),
 	.platform_data	= &sfe4002_lm87_channel,
 	.irq		= -1,
 };

 /****************************************************************************/
 /* LED allocations. Note that on rev A0 boards the schematic and the reality
  * differ: red and green are swapped. Below is the fixed (A1) layout (there
  * are only 3 A0 boards in existence, so no real reason to make this
  * conditional).
  */
 #define SFE4002_FAULT_LED (2)	/* Red */
 #define SFE4002_RX_LED    (0)	/* Green */
 #define SFE4002_TX_LED    (1)	/* Amber */

 static void sfe4002_init_leds(struct efx_nic *efx)
 {
 	/* Set the TX and RX LEDs to reflect status and activity, and the
 	 * fault LED off */
 	xfp_set_led(efx, SFE4002_TX_LED,
 		    QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
 	xfp_set_led(efx, SFE4002_RX_LED,
 		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
 	xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
 }

 static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
 {
 	xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
 			QUAKE_LED_OFF);
 }

 static int sfe4002_check_hw(struct efx_nic *efx)
 {
 	/* A0 board rev. 4002s report a temperature fault the whole time
 	 * (bad sensor) so we mask it out. */
 	unsigned alarm_mask =
 		(efx->board_info.major == 0 && efx->board_info.minor == 0) ?
 		~LM87_ALARM_TEMP_EXT1 : ~0;

 	return efx_check_lm87(efx, alarm_mask);
 }

 static int sfe4002_init(struct efx_nic *efx)
 {
 	int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
 	if (rc)
 		return rc;
 	efx->board_info.monitor = sfe4002_check_hw;
 	efx->board_info.init_leds = sfe4002_init_leds;
 	efx->board_info.set_id_led = sfe4002_set_id_led;
 	efx->board_info.blink = board_blink;
 	efx->board_info.fini = efx_fini_lm87;
 	return 0;
 }

 /*****************************************************************************
  * Support for the SFN4112F
  *
  */
 static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */

 static const u8 sfn4112f_lm87_regs[] = {
 	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
 	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
 	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
 	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
 	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
 	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
 	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
 	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
 	0
 };

 static struct i2c_board_info sfn4112f_hwmon_info = {
 	I2C_BOARD_INFO("lm87", 0x2e),
 	.platform_data	= &sfn4112f_lm87_channel,
 	.irq		= -1,
 };

 #define SFN4112F_ACT_LED	0
 #define SFN4112F_LINK_LED	1

 static void sfn4112f_init_leds(struct efx_nic *efx)
 {
 	xfp_set_led(efx, SFN4112F_ACT_LED,
 		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
 	xfp_set_led(efx, SFN4112F_LINK_LED,
 		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
 }

 static void sfn4112f_set_id_led(struct efx_nic *efx, bool state)
 {
 	xfp_set_led(efx, SFN4112F_LINK_LED,
 		    state ? QUAKE_LED_ON : QUAKE_LED_OFF);
 }

 static int sfn4112f_check_hw(struct efx_nic *efx)
 {
 	/* Mask out unused sensors */
 	return efx_check_lm87(efx, ~0x48);
 }

 static int sfn4112f_init(struct efx_nic *efx)
 {
 	int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
 	if (rc)
 		return rc;
 	efx->board_info.monitor = sfn4112f_check_hw;
 	efx->board_info.init_leds = sfn4112f_init_leds;
 	efx->board_info.set_id_led = sfn4112f_set_id_led;
 	efx->board_info.blink = board_blink;
 	efx->board_info.fini = efx_fini_lm87;
 	return 0;
 }

 /* This will get expanded as board-specific details get moved out of the
  * PHY drivers. */
 struct efx_board_data {
 	enum efx_board_type type;
 	const char *ref_model;
 	const char *gen_type;
 	int (*init) (struct efx_nic *nic);
 };


 static struct efx_board_data board_data[] = {
 	{ EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init },
 	{ EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init },
 	{ EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter",
 	  sfn4111t_init },
 	{ EFX_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter",
 	  sfn4112f_init },
 };

 void efx_set_board_info(struct efx_nic *efx, u16 revision_info)
 {
 	struct efx_board_data *data = NULL;
 	int i;

 	efx->board_info.type = BOARD_TYPE(revision_info);
 	efx->board_info.major = BOARD_MAJOR(revision_info);
 	efx->board_info.minor = BOARD_MINOR(revision_info);

 	for (i = 0; i < ARRAY_SIZE(board_data); i++)
 		if (board_data[i].type == efx->board_info.type)
 			data = &board_data[i];

 	if (data) {
 		EFX_INFO(efx, "board is %s rev %c%d\n",
 			 (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
 			 ? data->ref_model : data->gen_type,
 			 'A' + efx->board_info.major, efx->board_info.minor);
 		efx->board_info.init = data->init;
 	} else {
 		EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
 	}
 }
	/****************************************************************************
	* Driver for Solarflare Solarstorm network controllers and boards
	* Copyright 2007-2008 Solarflare Communications Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published
	* by the Free Software Foundation, incorporated herein by reference.
	*/

	#include "net_driver.h"
	#include "phy.h"
	#include "boards.h"
	#include "efx.h"
	#include "workarounds.h"

	/* Macros for unpacking the board revision */
	/* The revision info is in host byte order. */
	#define BOARD_TYPE(_rev) (_rev >> 8)
	#define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
	#define BOARD_MINOR(_rev) (_rev & 0xf)

	/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */
	#define BLINK_INTERVAL (HZ/2)

	static void blink_led_timer(unsigned long context)
	{
	struct efx_nic efx = (struct efx_nic )context;
	struct efx_blinker *bl = &efx->board_info.blinker;
	efx->board_info.set_id_led(efx, bl->state);
	bl->state = !bl->state;
	if (bl->resubmit)
	mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
	}

	static void board_blink(struct efx_nic *efx, bool blink)
	{
	struct efx_blinker *blinker = &efx->board_info.blinker;

	/* The rtnl mutex serialises all ethtool ioctls, so
	* nothing special needs doing here. */
	if (blink) {
	blinker->resubmit = true;
	blinker->state = false;
	setup_timer(&blinker->timer, blink_led_timer,
	(unsigned long)efx);
	mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
	} else {
	blinker->resubmit = false;
	if (blinker->timer.function)
	del_timer_sync(&blinker->timer);
	efx->board_info.init_leds(efx);
	}
	}

	/*****************************************************************************
	* Support for LM87 sensor chip used on several boards
	*/
	#define LM87_REG_ALARMS1 0x41
	#define LM87_REG_ALARMS2 0x42
	#define LM87_IN_LIMITS(nr, _min, _max) \
	0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
	#define LM87_AIN_LIMITS(nr, _min, _max) \
	0x3B + (nr), _max, 0x1A + (nr), _min
	#define LM87_TEMP_INT_LIMITS(_min, _max) \
	0x39, _max, 0x3A, _min
	#define LM87_TEMP_EXT1_LIMITS(_min, _max) \
	0x37, _max, 0x38, _min

	#define LM87_ALARM_TEMP_INT 0x10
	#define LM87_ALARM_TEMP_EXT1 0x20

	#if defined(CONFIG_SENSORS_LM87) \|\| defined(CONFIG_SENSORS_LM87_MODULE)

	static int efx_init_lm87(struct efx_nic efx, struct i2c_board_info info,
	const u8 *reg_values)
	{
	struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
	int rc;

	if (!client)
	return -EIO;

	while (*reg_values) {
	u8 reg = *reg_values++;
	u8 value = *reg_values++;
	rc = i2c_smbus_write_byte_data(client, reg, value);
	if (rc)
	goto err;
	}

	efx->board_info.hwmon_client = client;
	return 0;

	err:
	i2c_unregister_device(client);
	return rc;
	}

	static void efx_fini_lm87(struct efx_nic *efx)
	{
	i2c_unregister_device(efx->board_info.hwmon_client);
	}

	static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
	{
	struct i2c_client *client = efx->board_info.hwmon_client;
	s32 alarms1, alarms2;

	/* If link is up then do not monitor temperature */
	if (EFX_WORKAROUND_7884(efx) && efx->link_up)
	return 0;

	alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
	alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
	if (alarms1 < 0)
	return alarms1;
	if (alarms2 < 0)
	return alarms2;
	alarms1 &= mask;
	alarms2 &= mask >> 8;
	if (alarms1 \|\| alarms2) {
	EFX_ERR(efx,
	"LM87 detected a hardware failure (status %02x:%02x)"
	"%s%s\n",
	alarms1, alarms2,
	(alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
	(alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
	return -ERANGE;
	}

	return 0;
	}

	#else /* !CONFIG_SENSORS_LM87 */

	static inline int
	efx_init_lm87(struct efx_nic efx, struct i2c_board_info info,
	const u8 *reg_values)
	{
	return 0;
	}
	static inline void efx_fini_lm87(struct efx_nic *efx)
	{
	}
	static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
	{
	return 0;
	}

	#endif /* CONFIG_SENSORS_LM87 */

	/*****************************************************************************
	* Support for the SFE4002
	*
	*/
	static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */

	static const u8 sfe4002_lm87_regs[] = {
	LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */
	LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */
	LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */
	LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */
	LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */
	LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */
	LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */
	LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */
	LM87_TEMP_INT_LIMITS(10, 60), /* board */
	LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */
	0
	};

	static struct i2c_board_info sfe4002_hwmon_info = {
	I2C_BOARD_INFO("lm87", 0x2e),
	.platform_data = &sfe4002_lm87_channel,
	.irq = -1,
	};

	/****************************************************************************/
	/* LED allocations. Note that on rev A0 boards the schematic and the reality
	* differ: red and green are swapped. Below is the fixed (A1) layout (there
	* are only 3 A0 boards in existence, so no real reason to make this
	* conditional).
	*/
	#define SFE4002_FAULT_LED (2) /* Red */
	#define SFE4002_RX_LED (0) /* Green */
	#define SFE4002_TX_LED (1) /* Amber */

	static void sfe4002_init_leds(struct efx_nic *efx)
	{
	/* Set the TX and RX LEDs to reflect status and activity, and the
	* fault LED off */
	xfp_set_led(efx, SFE4002_TX_LED,
	QUAKE_LED_TXLINK \| QUAKE_LED_LINK_ACTSTAT);
	xfp_set_led(efx, SFE4002_RX_LED,
	QUAKE_LED_RXLINK \| QUAKE_LED_LINK_ACTSTAT);
	xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
	}

	static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
	{
	xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
	QUAKE_LED_OFF);
	}

	static int sfe4002_check_hw(struct efx_nic *efx)
	{
	/* A0 board rev. 4002s report a temperature fault the whole time
	* (bad sensor) so we mask it out. */
	unsigned alarm_mask =
	(efx->board_info.major == 0 && efx->board_info.minor == 0) ?
	~LM87_ALARM_TEMP_EXT1 : ~0;

	return efx_check_lm87(efx, alarm_mask);
	}

	static int sfe4002_init(struct efx_nic *efx)
	{
	int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
	if (rc)
	return rc;
	efx->board_info.monitor = sfe4002_check_hw;
	efx->board_info.init_leds = sfe4002_init_leds;
	efx->board_info.set_id_led = sfe4002_set_id_led;
	efx->board_info.blink = board_blink;
	efx->board_info.fini = efx_fini_lm87;
	return 0;
	}

	/*****************************************************************************
	* Support for the SFN4112F
	*
	*/
	static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */

	static const u8 sfn4112f_lm87_regs[] = {
	LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */
	LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */
	LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */
	LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */
	LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */
	LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */
	LM87_TEMP_INT_LIMITS(10, 60), /* board */
	LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */
	0
	};

	static struct i2c_board_info sfn4112f_hwmon_info = {
	I2C_BOARD_INFO("lm87", 0x2e),
	.platform_data = &sfn4112f_lm87_channel,
	.irq = -1,
	};

	#define SFN4112F_ACT_LED 0
	#define SFN4112F_LINK_LED 1

	static void sfn4112f_init_leds(struct efx_nic *efx)
	{
	xfp_set_led(efx, SFN4112F_ACT_LED,
	QUAKE_LED_RXLINK \| QUAKE_LED_LINK_ACT);
	xfp_set_led(efx, SFN4112F_LINK_LED,
	QUAKE_LED_RXLINK \| QUAKE_LED_LINK_STAT);
	}

	static void sfn4112f_set_id_led(struct efx_nic *efx, bool state)
	{
	xfp_set_led(efx, SFN4112F_LINK_LED,
	state ? QUAKE_LED_ON : QUAKE_LED_OFF);
	}

	static int sfn4112f_check_hw(struct efx_nic *efx)
	{
	/* Mask out unused sensors */
	return efx_check_lm87(efx, ~0x48);
	}

	static int sfn4112f_init(struct efx_nic *efx)
	{
	int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
	if (rc)
	return rc;
	efx->board_info.monitor = sfn4112f_check_hw;
	efx->board_info.init_leds = sfn4112f_init_leds;
	efx->board_info.set_id_led = sfn4112f_set_id_led;
	efx->board_info.blink = board_blink;
	efx->board_info.fini = efx_fini_lm87;
	return 0;
	}

	/* This will get expanded as board-specific details get moved out of the
	* PHY drivers. */
	struct efx_board_data {
	enum efx_board_type type;
	const char *ref_model;
	const char *gen_type;
	int (init) (struct efx_nic nic);
	};


	static struct efx_board_data board_data[] = {
	{ EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init },
	{ EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init },
	{ EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter",
	sfn4111t_init },
	{ EFX_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter",
	sfn4112f_init },
	};

	void efx_set_board_info(struct efx_nic *efx, u16 revision_info)
	{
	struct efx_board_data *data = NULL;
	int i;

	efx->board_info.type = BOARD_TYPE(revision_info);
	efx->board_info.major = BOARD_MAJOR(revision_info);
	efx->board_info.minor = BOARD_MINOR(revision_info);

	for (i = 0; i < ARRAY_SIZE(board_data); i++)
	if (board_data[i].type == efx->board_info.type)
	data = &board_data[i];

	if (data) {
	EFX_INFO(efx, "board is %s rev %c%d\n",
	(efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
	? data->ref_model : data->gen_type,
	'A' + efx->board_info.major, efx->board_info.minor);
	efx->board_info.init = data->init;
	} else {
	EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
	}
	}