Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] kprobe clears qp bits for special instructions
[IA64] enable trap code on slot 1
[IA64] Take defensive stance on ia64_pal_get_brand_info()
[IA64] fix possible XPC deadlock when disconnecting
[IA64] - Reduce overhead of FP exception logging messages
[IA64] fix arch/ia64/mm/contig.c:235: warning: unused variable `nid'
[IA64] s/termios/ktermios/ in simserial.c
[IA64] kexec/kdump: tidy up declaration of relocate_new_kernel_t
[IA64] Kexec/Kdump: honour non-zero crashkernel offset.
[IA64] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutations
[IA64] Do not call SN_SAL_SET_CPU_NUMBER twice on cpu 0
diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
index 29b3f9f..ce0666e 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.txt
@@ -24,7 +24,7 @@
1. General Information
=======================
-The CPUFreq core code is located in linux/kernel/cpufreq.c. This
+The CPUFreq core code is located in drivers/cpufreq/cpufreq.c. This
cpufreq code offers a standardized interface for the CPUFreq
architecture drivers (those pieces of code that do actual
frequency transitions), as well as to "notifiers". These are device
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 46f2a55..64ce44d 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -216,17 +216,6 @@
---------------------------
-What: i2c-ite and i2c-algo-ite drivers
-When: September 2006
-Why: These drivers never compiled since they were added to the kernel
- tree 5 years ago. This feature removal can be reevaluated if
- someone shows interest in the drivers, fixes them and takes over
- maintenance.
- http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: Bridge netfilter deferred IPv4/IPv6 output hook calling
When: January 2007
Why: The deferred output hooks are a layering violation causing unusual
@@ -270,3 +259,25 @@
Who: Patrick McHardy <kaber@trash.net>
---------------------------
+
+What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
+When: December 2006
+Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
+ functionally very much similar. They talk to ACPI in same way. Only
+ difference between them is the way they do frequency transitions.
+ One uses MSRs and the other one uses IO ports. Functionaliy of
+ speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
+ That means one common driver will support all Intel Enhanced Speedstep
+ capable CPUs. That means less confusion over name of
+ speedstep-centrino driver (with that driver supposed to be used on
+ non-centrino platforms). That means less duplication of code and
+ less maintenance effort and no possibility of these two drivers
+ going out of sync.
+ Current users of speedstep_centrino with ACPI hooks are requested to
+ switch over to acpi-cpufreq driver. speedstep-centrino will continue
+ to work using older non-ACPI static table based scheme even after this
+ date.
+
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+---------------------------
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index af6defd..8ccf0c1 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -54,3 +54,6 @@
intr (*) Allow signals to interrupt cluster operations.
nointr Do not allow signals to interrupt cluster
operations.
+atime_quantum=60(*) OCFS2 will not update atime unless this number
+ of seconds has passed since the last update.
+ Set to zero to always update atime.
diff --git a/Documentation/i2c/busses/i2c-amd8111 b/Documentation/i2c/busses/i2c-amd8111
index db294ee..460dd66 100644
--- a/Documentation/i2c/busses/i2c-amd8111
+++ b/Documentation/i2c/busses/i2c-amd8111
@@ -5,7 +5,7 @@
Datasheets:
AMD datasheet not yet available, but almost everything can be found
- in publically available ACPI 2.0 specification, which the adapter
+ in the publicly available ACPI 2.0 specification, which the adapter
follows.
Author: Vojtech Pavlik <vojtech@suse.cz>
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index e46c234..3db69a0 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -9,7 +9,10 @@
* Intel 82801EB/ER (ICH5) (HW PEC supported, 32 byte buffer not supported)
* Intel 6300ESB
* Intel 82801FB/FR/FW/FRW (ICH6)
- * Intel ICH7
+ * Intel 82801G (ICH7)
+ * Intel 631xESB/632xESB (ESB2)
+ * Intel 82801H (ICH8)
+ * Intel ICH9
Datasheets: Publicly available at the Intel website
Authors:
diff --git a/Documentation/i2c/busses/i2c-nforce2 b/Documentation/i2c/busses/i2c-nforce2
index cd49c42..7f61fbc 100644
--- a/Documentation/i2c/busses/i2c-nforce2
+++ b/Documentation/i2c/busses/i2c-nforce2
@@ -10,11 +10,11 @@
* nForce4 MCP51 10de:0264
* nForce4 MCP55 10de:0368
-Datasheet: not publically available, but seems to be similar to the
+Datasheet: not publicly available, but seems to be similar to the
AMD-8111 SMBus 2.0 adapter.
Authors:
- Hans-Frieder Vogt <hfvogt@arcor.de>,
+ Hans-Frieder Vogt <hfvogt@gmx.net>,
Thomas Leibold <thomas@plx.com>,
Patrick Dreker <patrick@dreker.de>
@@ -38,7 +38,7 @@
-----
The SMBus adapter in the nForce2 chipset seems to be very similar to the
-SMBus 2.0 adapter in the AMD-8111 southbridge. However, I could only get
+SMBus 2.0 adapter in the AMD-8111 south bridge. However, I could only get
the driver to work with direct I/O access, which is different to the EC
interface of the AMD-8111. Tested on Asus A7N8X. The ACPI DSDT table of the
Asus A7N8X lists two SMBuses, both of which are supported by this driver.
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 125093c..536d5bf 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -29,7 +29,7 @@
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
help
Usually, modules have to be recompiled whenever you switch to a new
kernel. ...
@@ -163,7 +163,7 @@
it can be specified explicitly:
menu "Network device support"
- depends NET
+ depends on NET
config NETDEVICES
...
@@ -188,10 +188,10 @@
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
comment "module support disabled"
- depends !MODULES
+ depends on !MODULES
MODVERSIONS directly depends on MODULES, this means it's only visible if
MODULES is different from 'n'. The comment on the other hand is always
diff --git a/MAINTAINERS b/MAINTAINERS
index b202493..8a0bfec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -740,7 +740,7 @@
M: davej@codemonkey.org.uk
L: cpufreq@lists.linux.org.uk
W: http://www.codemonkey.org.uk/projects/cpufreq/
-T: git kernel.org/pub/scm/linux/kernel/davej/cpufreq.git
+T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
CPUID/MSR DRIVER
@@ -1504,8 +1504,10 @@
S: Maintained
INOTIFY
-P: John McCutchan and Robert Love
-M: ttb@tentacle.dhs.org and rml@novell.com
+P: John McCutchan
+M: ttb@tentacle.dhs.org
+P: Robert Love
+M: rml@novell.com
L: linux-kernel@vger.kernel.org
S: Maintained
diff --git a/Makefile b/Makefile
index 73e825b..4eabaa8 100644
--- a/Makefile
+++ b/Makefile
@@ -1100,9 +1100,9 @@
help:
@echo 'Cleaning targets:'
- @echo ' clean - remove most generated files but keep the config and'
+ @echo ' clean - Remove most generated files but keep the config and'
@echo ' enough build support to build external modules'
- @echo ' mrproper - remove all generated files + config + various backup files'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo 'Configuration targets:'
diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile
index b457ca0..777564c 100644
--- a/arch/arm/mach-pnx4008/Makefile
+++ b/arch/arm/mach-pnx4008/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o
+obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
new file mode 100644
index 0000000..6f30882
--- /dev/null
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -0,0 +1,167 @@
+/*
+ * I2C initialization for PNX4008.
+ *
+ * Author: Vitaly Wool <vitalywool@gmail.com>
+ *
+ * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pnx.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <asm/arch/platform.h>
+#include <asm/arch/i2c.h>
+
+static int set_clock_run(struct platform_device *pdev)
+{
+ struct clk *clk;
+ char name[10];
+ int retval = 0;
+
+ snprintf(name, 10, "i2c%d_ck", pdev->id);
+ clk = clk_get(&pdev->dev, name);
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 1);
+ clk_put(clk);
+ } else
+ retval = -ENOENT;
+
+ return retval;
+}
+
+static int set_clock_stop(struct platform_device *pdev)
+{
+ struct clk *clk;
+ char name[10];
+ int retval = 0;
+
+ snprintf(name, 10, "i2c%d_ck", pdev->id);
+ clk = clk_get(&pdev->dev, name);
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 0);
+ clk_put(clk);
+ } else
+ retval = -ENOENT;
+
+ return retval;
+}
+
+static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int retval = 0;
+#ifdef CONFIG_PM
+ retval = set_clock_run(pdev);
+#endif
+ return retval;
+}
+
+static int i2c_pnx_resume(struct platform_device *pdev)
+{
+ int retval = 0;
+#ifdef CONFIG_PM
+ retval = set_clock_run(pdev);
+#endif
+ return retval;
+}
+
+static u32 calculate_input_freq(struct platform_device *pdev)
+{
+ return HCLK_MHZ;
+}
+
+
+static struct i2c_pnx_algo_data pnx_algo_data0 = {
+ .base = PNX4008_I2C1_BASE,
+ .irq = I2C_1_INT,
+};
+
+static struct i2c_pnx_algo_data pnx_algo_data1 = {
+ .base = PNX4008_I2C2_BASE,
+ .irq = I2C_2_INT,
+};
+
+static struct i2c_pnx_algo_data pnx_algo_data2 = {
+ .base = (PNX4008_USB_CONFIG_BASE + 0x300),
+ .irq = USB_I2C_INT,
+};
+
+static struct i2c_adapter pnx_adapter0 = {
+ .name = I2C_CHIP_NAME "0",
+ .algo_data = &pnx_algo_data0,
+};
+static struct i2c_adapter pnx_adapter1 = {
+ .name = I2C_CHIP_NAME "1",
+ .algo_data = &pnx_algo_data1,
+};
+
+static struct i2c_adapter pnx_adapter2 = {
+ .name = "USB-I2C",
+ .algo_data = &pnx_algo_data2,
+};
+
+static struct i2c_pnx_data i2c0_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter0,
+};
+
+static struct i2c_pnx_data i2c1_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter1,
+};
+
+static struct i2c_pnx_data i2c2_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter2,
+};
+
+static struct platform_device i2c0_device = {
+ .name = "pnx-i2c",
+ .id = 0,
+ .dev = {
+ .platform_data = &i2c0_data,
+ },
+};
+
+static struct platform_device i2c1_device = {
+ .name = "pnx-i2c",
+ .id = 1,
+ .dev = {
+ .platform_data = &i2c1_data,
+ },
+};
+
+static struct platform_device i2c2_device = {
+ .name = "pnx-i2c",
+ .id = 2,
+ .dev = {
+ .platform_data = &i2c2_data,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &i2c0_device,
+ &i2c1_device,
+ &i2c2_device,
+};
+
+void __init pnx4008_register_i2c_devices(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 9e3d0bd..5c0a100 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -75,28 +75,28 @@
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
@@ -104,17 +104,17 @@
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
config PXA25x
bool
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 68c6705..84d3fe7 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -141,6 +141,19 @@
.resource = realview_smc91x_resources,
};
+static struct resource realview_i2c_resource = {
+ .start = REALVIEW_I2C_BASE,
+ .end = REALVIEW_I2C_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+struct platform_device realview_i2c_device = {
+ .name = "versatile-i2c",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &realview_i2c_resource,
+};
+
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
static unsigned int realview_mmc_status(struct device *dev)
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 93e86d9..2b53420 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -108,6 +108,7 @@
extern struct platform_device realview_flash_device;
extern struct platform_device realview_smc91x_device;
+extern struct platform_device realview_i2c_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clk realview_clcd_clk;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 84a9595..9741b4d 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -155,6 +155,7 @@
platform_device_register(&realview_flash_device);
platform_device_register(&realview_smc91x_device);
+ platform_device_register(&realview_i2c_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 5719694..bf71507 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -325,6 +325,19 @@
.resource = smc91x_resources,
};
+static struct resource versatile_i2c_resource = {
+ .start = VERSATILE_I2C_BASE,
+ .end = VERSATILE_I2C_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device versatile_i2c_device = {
+ .name = "versatile-i2c",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &versatile_i2c_resource,
+};
+
#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
unsigned int mmc_status(struct device *dev)
@@ -775,6 +788,7 @@
clk_register(&versatile_clcd_clk);
platform_device_register(&versatile_flash_device);
+ platform_device_register(&versatile_i2c_device);
platform_device_register(&smc91x_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ec752e1..f2dc363 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -113,7 +113,7 @@
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends OMAP_MUX
+ depends on OMAP_MUX
default y
help
Select this option if you want to have your system wake up
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index ccc1edf..5299c5b 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -17,6 +17,7 @@
help
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
+ This driver also supports Intel Enhanced Speedstep.
For details, take a look at <file:Documentation/cpu-freq/>.
@@ -121,11 +122,14 @@
If in doubt, say N.
config X86_SPEEDSTEP_CENTRINO_ACPI
- bool "Use ACPI tables to decode valid frequency/voltage pairs"
+ bool "Use ACPI tables to decode valid frequency/voltage (deprecated)"
depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
default y
help
+ This is deprecated and this functionality is now merged into
+ acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+ speedstep_centrino.
Use primarily the information provided in the BIOS ACPI tables
to determine valid CPU frequency and voltage pairings. It is
required for the driver to work on non-Banias CPUs.
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
index 2e894f1..8de3abe 100644
--- a/arch/i386/kernel/cpu/cpufreq/Makefile
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -7,9 +7,9 @@
obj-$(CONFIG_X86_LONGRUN) += longrun.o
obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 57c880b..18f4715 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -1,9 +1,10 @@
/*
- * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.3 $)
+ * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
@@ -27,202 +28,387 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
#include <linux/cpufreq.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <linux/compiler.h>
-#include <linux/sched.h> /* current */
#include <linux/dmi.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
#include <linux/acpi.h>
#include <acpi/processor.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
MODULE_DESCRIPTION("ACPI Processor P-States Driver");
MODULE_LICENSE("GPL");
-
-struct cpufreq_acpi_io {
- struct acpi_processor_performance *acpi_data;
- struct cpufreq_frequency_table *freq_table;
- unsigned int resume;
+enum {
+ UNDEFINED_CAPABLE = 0,
+ SYSTEM_INTEL_MSR_CAPABLE,
+ SYSTEM_IO_CAPABLE,
};
-static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS];
-static struct acpi_processor_performance *acpi_perf_data[NR_CPUS];
+#define INTEL_MSR_RANGE (0xffff)
+#define CPUID_6_ECX_APERFMPERF_CAPABILITY (0x1)
+
+struct acpi_cpufreq_data {
+ struct acpi_processor_performance *acpi_data;
+ struct cpufreq_frequency_table *freq_table;
+ unsigned int max_freq;
+ unsigned int resume;
+ unsigned int cpu_feature;
+};
+
+static struct acpi_cpufreq_data *drv_data[NR_CPUS];
+static struct acpi_processor_performance *acpi_perf_data[NR_CPUS];
static struct cpufreq_driver acpi_cpufreq_driver;
static unsigned int acpi_pstate_strict;
-static int
-acpi_processor_write_port(
- u16 port,
- u8 bit_width,
- u32 value)
+static int check_est_cpu(unsigned int cpuid)
{
- if (bit_width <= 8) {
- outb(value, port);
- } else if (bit_width <= 16) {
- outw(value, port);
- } else if (bit_width <= 32) {
- outl(value, port);
- } else {
- return -ENODEV;
+ struct cpuinfo_x86 *cpu = &cpu_data[cpuid];
+
+ if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+ !cpu_has(cpu, X86_FEATURE_EST))
+ return 0;
+
+ return 1;
+}
+
+static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
+{
+ struct acpi_processor_performance *perf;
+ int i;
+
+ perf = data->acpi_data;
+
+ for (i=0; i<perf->state_count; i++) {
+ if (value == perf->states[i].status)
+ return data->freq_table[i].frequency;
}
return 0;
}
-static int
-acpi_processor_read_port(
- u16 port,
- u8 bit_width,
- u32 *ret)
+static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
+{
+ int i;
+ struct acpi_processor_performance *perf;
+
+ msr &= INTEL_MSR_RANGE;
+ perf = data->acpi_data;
+
+ for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ if (msr == perf->states[data->freq_table[i].index].status)
+ return data->freq_table[i].frequency;
+ }
+ return data->freq_table[0].frequency;
+}
+
+static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
+{
+ switch (data->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ return extract_msr(val, data);
+ case SYSTEM_IO_CAPABLE:
+ return extract_io(val, data);
+ default:
+ return 0;
+ }
+}
+
+static void wrport(u16 port, u8 bit_width, u32 value)
+{
+ if (bit_width <= 8)
+ outb(value, port);
+ else if (bit_width <= 16)
+ outw(value, port);
+ else if (bit_width <= 32)
+ outl(value, port);
+}
+
+static void rdport(u16 port, u8 bit_width, u32 * ret)
{
*ret = 0;
- if (bit_width <= 8) {
+ if (bit_width <= 8)
*ret = inb(port);
- } else if (bit_width <= 16) {
+ else if (bit_width <= 16)
*ret = inw(port);
- } else if (bit_width <= 32) {
+ else if (bit_width <= 32)
*ret = inl(port);
- } else {
- return -ENODEV;
+}
+
+struct msr_addr {
+ u32 reg;
+};
+
+struct io_addr {
+ u16 port;
+ u8 bit_width;
+};
+
+typedef union {
+ struct msr_addr msr;
+ struct io_addr io;
+} drv_addr_union;
+
+struct drv_cmd {
+ unsigned int type;
+ cpumask_t mask;
+ drv_addr_union addr;
+ u32 val;
+};
+
+static void do_drv_read(struct drv_cmd *cmd)
+{
+ u32 h;
+
+ switch (cmd->type) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ rdmsr(cmd->addr.msr.reg, cmd->val, h);
+ break;
+ case SYSTEM_IO_CAPABLE:
+ rdport(cmd->addr.io.port, cmd->addr.io.bit_width, &cmd->val);
+ break;
+ default:
+ break;
+ }
+}
+
+static void do_drv_write(struct drv_cmd *cmd)
+{
+ u32 h = 0;
+
+ switch (cmd->type) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ wrmsr(cmd->addr.msr.reg, cmd->val, h);
+ break;
+ case SYSTEM_IO_CAPABLE:
+ wrport(cmd->addr.io.port, cmd->addr.io.bit_width, cmd->val);
+ break;
+ default:
+ break;
+ }
+}
+
+static void drv_read(struct drv_cmd *cmd)
+{
+ cpumask_t saved_mask = current->cpus_allowed;
+ cmd->val = 0;
+
+ set_cpus_allowed(current, cmd->mask);
+ do_drv_read(cmd);
+ set_cpus_allowed(current, saved_mask);
+}
+
+static void drv_write(struct drv_cmd *cmd)
+{
+ cpumask_t saved_mask = current->cpus_allowed;
+ unsigned int i;
+
+ for_each_cpu_mask(i, cmd->mask) {
+ set_cpus_allowed(current, cpumask_of_cpu(i));
+ do_drv_write(cmd);
+ }
+
+ set_cpus_allowed(current, saved_mask);
+ return;
+}
+
+static u32 get_cur_val(cpumask_t mask)
+{
+ struct acpi_processor_performance *perf;
+ struct drv_cmd cmd;
+
+ if (unlikely(cpus_empty(mask)))
+ return 0;
+
+ switch (drv_data[first_cpu(mask)]->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
+ cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
+ break;
+ case SYSTEM_IO_CAPABLE:
+ cmd.type = SYSTEM_IO_CAPABLE;
+ perf = drv_data[first_cpu(mask)]->acpi_data;
+ cmd.addr.io.port = perf->control_register.address;
+ cmd.addr.io.bit_width = perf->control_register.bit_width;
+ break;
+ default:
+ return 0;
+ }
+
+ cmd.mask = mask;
+
+ drv_read(&cmd);
+
+ dprintk("get_cur_val = %u\n", cmd.val);
+
+ return cmd.val;
+}
+
+/*
+ * Return the measured active (C0) frequency on this CPU since last call
+ * to this function.
+ * Input: cpu number
+ * Return: Average CPU frequency in terms of max frequency (zero on error)
+ *
+ * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance
+ * over a period of time, while CPU is in C0 state.
+ * IA32_MPERF counts at the rate of max advertised frequency
+ * IA32_APERF counts at the rate of actual CPU frequency
+ * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
+ * no meaning should be associated with absolute values of these MSRs.
+ */
+static unsigned int get_measured_perf(unsigned int cpu)
+{
+ union {
+ struct {
+ u32 lo;
+ u32 hi;
+ } split;
+ u64 whole;
+ } aperf_cur, mperf_cur;
+
+ cpumask_t saved_mask;
+ unsigned int perf_percent;
+ unsigned int retval;
+
+ saved_mask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (get_cpu() != cpu) {
+ /* We were not able to run on requested processor */
+ put_cpu();
+ return 0;
+ }
+
+ rdmsr(MSR_IA32_APERF, aperf_cur.split.lo, aperf_cur.split.hi);
+ rdmsr(MSR_IA32_MPERF, mperf_cur.split.lo, mperf_cur.split.hi);
+
+ wrmsr(MSR_IA32_APERF, 0,0);
+ wrmsr(MSR_IA32_MPERF, 0,0);
+
+#ifdef __i386__
+ /*
+ * We dont want to do 64 bit divide with 32 bit kernel
+ * Get an approximate value. Return failure in case we cannot get
+ * an approximate value.
+ */
+ if (unlikely(aperf_cur.split.hi || mperf_cur.split.hi)) {
+ int shift_count;
+ u32 h;
+
+ h = max_t(u32, aperf_cur.split.hi, mperf_cur.split.hi);
+ shift_count = fls(h);
+
+ aperf_cur.whole >>= shift_count;
+ mperf_cur.whole >>= shift_count;
+ }
+
+ if (((unsigned long)(-1) / 100) < aperf_cur.split.lo) {
+ int shift_count = 7;
+ aperf_cur.split.lo >>= shift_count;
+ mperf_cur.split.lo >>= shift_count;
+ }
+
+ if (aperf_cur.split.lo && mperf_cur.split.lo)
+ perf_percent = (aperf_cur.split.lo * 100) / mperf_cur.split.lo;
+ else
+ perf_percent = 0;
+
+#else
+ if (unlikely(((unsigned long)(-1) / 100) < aperf_cur.whole)) {
+ int shift_count = 7;
+ aperf_cur.whole >>= shift_count;
+ mperf_cur.whole >>= shift_count;
+ }
+
+ if (aperf_cur.whole && mperf_cur.whole)
+ perf_percent = (aperf_cur.whole * 100) / mperf_cur.whole;
+ else
+ perf_percent = 0;
+
+#endif
+
+ retval = drv_data[cpu]->max_freq * perf_percent / 100;
+
+ put_cpu();
+ set_cpus_allowed(current, saved_mask);
+
+ dprintk("cpu %d: performance percent %d\n", cpu, perf_percent);
+ return retval;
+}
+
+static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
+{
+ struct acpi_cpufreq_data *data = drv_data[cpu];
+ unsigned int freq;
+
+ dprintk("get_cur_freq_on_cpu (%d)\n", cpu);
+
+ if (unlikely(data == NULL ||
+ data->acpi_data == NULL || data->freq_table == NULL)) {
+ return 0;
+ }
+
+ freq = extract_freq(get_cur_val(cpumask_of_cpu(cpu)), data);
+ dprintk("cur freq = %u\n", freq);
+
+ return freq;
+}
+
+static unsigned int check_freqs(cpumask_t mask, unsigned int freq,
+ struct acpi_cpufreq_data *data)
+{
+ unsigned int cur_freq;
+ unsigned int i;
+
+ for (i=0; i<100; i++) {
+ cur_freq = extract_freq(get_cur_val(mask), data);
+ if (cur_freq == freq)
+ return 1;
+ udelay(10);
}
return 0;
}
-static int
-acpi_processor_set_performance (
- struct cpufreq_acpi_io *data,
- unsigned int cpu,
- int state)
+static int acpi_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
{
- u16 port = 0;
- u8 bit_width = 0;
- int i = 0;
- int ret = 0;
- u32 value = 0;
- int retval;
- struct acpi_processor_performance *perf;
-
- dprintk("acpi_processor_set_performance\n");
-
- retval = 0;
- perf = data->acpi_data;
- if (state == perf->state) {
- if (unlikely(data->resume)) {
- dprintk("Called after resume, resetting to P%d\n", state);
- data->resume = 0;
- } else {
- dprintk("Already at target state (P%d)\n", state);
- return (retval);
- }
- }
-
- dprintk("Transitioning from P%d to P%d\n", perf->state, state);
-
- /*
- * First we write the target state's 'control' value to the
- * control_register.
- */
-
- port = perf->control_register.address;
- bit_width = perf->control_register.bit_width;
- value = (u32) perf->states[state].control;
-
- dprintk("Writing 0x%08x to port 0x%04x\n", value, port);
-
- ret = acpi_processor_write_port(port, bit_width, value);
- if (ret) {
- dprintk("Invalid port width 0x%04x\n", bit_width);
- return (ret);
- }
-
- /*
- * Assume the write went through when acpi_pstate_strict is not used.
- * As read status_register is an expensive operation and there
- * are no specific error cases where an IO port write will fail.
- */
- if (acpi_pstate_strict) {
- /* Then we read the 'status_register' and compare the value
- * with the target state's 'status' to make sure the
- * transition was successful.
- * Note that we'll poll for up to 1ms (100 cycles of 10us)
- * before giving up.
- */
-
- port = perf->status_register.address;
- bit_width = perf->status_register.bit_width;
-
- dprintk("Looking for 0x%08x from port 0x%04x\n",
- (u32) perf->states[state].status, port);
-
- for (i = 0; i < 100; i++) {
- ret = acpi_processor_read_port(port, bit_width, &value);
- if (ret) {
- dprintk("Invalid port width 0x%04x\n", bit_width);
- return (ret);
- }
- if (value == (u32) perf->states[state].status)
- break;
- udelay(10);
- }
- } else {
- value = (u32) perf->states[state].status;
- }
-
- if (unlikely(value != (u32) perf->states[state].status)) {
- printk(KERN_WARNING "acpi-cpufreq: Transition failed\n");
- retval = -ENODEV;
- return (retval);
- }
-
- dprintk("Transition successful after %d microseconds\n", i * 10);
-
- perf->state = state;
- return (retval);
-}
-
-
-static int
-acpi_cpufreq_target (
- struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
struct acpi_processor_performance *perf;
struct cpufreq_freqs freqs;
cpumask_t online_policy_cpus;
- cpumask_t saved_mask;
- cpumask_t set_mask;
- cpumask_t covered_cpus;
- unsigned int cur_state = 0;
+ struct drv_cmd cmd;
+ unsigned int msr;
unsigned int next_state = 0;
- unsigned int result = 0;
- unsigned int j;
- unsigned int tmp;
+ unsigned int next_perf_state = 0;
+ unsigned int i;
+ int result = 0;
- dprintk("acpi_cpufreq_setpolicy\n");
+ dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
- result = cpufreq_frequency_table_target(policy,
- data->freq_table,
- target_freq,
- relation,
- &next_state);
- if (unlikely(result))
- return (result);
+ if (unlikely(data == NULL ||
+ data->acpi_data == NULL || data->freq_table == NULL)) {
+ return -ENODEV;
+ }
perf = data->acpi_data;
- cur_state = perf->state;
- freqs.old = data->freq_table[cur_state].frequency;
- freqs.new = data->freq_table[next_state].frequency;
+ result = cpufreq_frequency_table_target(policy,
+ data->freq_table,
+ target_freq,
+ relation, &next_state);
+ if (unlikely(result))
+ return -ENODEV;
#ifdef CONFIG_HOTPLUG_CPU
/* cpufreq holds the hotplug lock, so we are safe from here on */
@@ -231,106 +417,84 @@
online_policy_cpus = policy->cpus;
#endif
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
+ next_perf_state = data->freq_table[next_state].index;
+ if (perf->state == next_perf_state) {
+ if (unlikely(data->resume)) {
+ dprintk("Called after resume, resetting to P%d\n",
+ next_perf_state);
+ data->resume = 0;
+ } else {
+ dprintk("Already at target state (P%d)\n",
+ next_perf_state);
+ return 0;
+ }
+ }
+
+ switch (data->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
+ cmd.addr.msr.reg = MSR_IA32_PERF_CTL;
+ msr =
+ (u32) perf->states[next_perf_state].
+ control & INTEL_MSR_RANGE;
+ cmd.val = (cmd.val & ~INTEL_MSR_RANGE) | msr;
+ break;
+ case SYSTEM_IO_CAPABLE:
+ cmd.type = SYSTEM_IO_CAPABLE;
+ cmd.addr.io.port = perf->control_register.address;
+ cmd.addr.io.bit_width = perf->control_register.bit_width;
+ cmd.val = (u32) perf->states[next_perf_state].control;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ cpus_clear(cmd.mask);
+
+ if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
+ cmd.mask = online_policy_cpus;
+ else
+ cpu_set(policy->cpu, cmd.mask);
+
+ freqs.old = data->freq_table[perf->state].frequency;
+ freqs.new = data->freq_table[next_perf_state].frequency;
+ for_each_cpu_mask(i, cmd.mask) {
+ freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
- /*
- * We need to call driver->target() on all or any CPU in
- * policy->cpus, depending on policy->shared_type.
- */
- saved_mask = current->cpus_allowed;
- cpus_clear(covered_cpus);
- for_each_cpu_mask(j, online_policy_cpus) {
- /*
- * Support for SMP systems.
- * Make sure we are running on CPU that wants to change freq
- */
- cpus_clear(set_mask);
- if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
- cpus_or(set_mask, set_mask, online_policy_cpus);
- else
- cpu_set(j, set_mask);
+ drv_write(&cmd);
- set_cpus_allowed(current, set_mask);
- if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
- dprintk("couldn't limit to CPUs in this domain\n");
- result = -EAGAIN;
- break;
+ if (acpi_pstate_strict) {
+ if (!check_freqs(cmd.mask, freqs.new, data)) {
+ dprintk("acpi_cpufreq_target failed (%d)\n",
+ policy->cpu);
+ return -EAGAIN;
}
-
- result = acpi_processor_set_performance (data, j, next_state);
- if (result) {
- result = -EAGAIN;
- break;
- }
-
- if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
- break;
-
- cpu_set(j, covered_cpus);
}
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
+ for_each_cpu_mask(i, cmd.mask) {
+ freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
+ perf->state = next_perf_state;
- if (unlikely(result)) {
- /*
- * We have failed halfway through the frequency change.
- * We have sent callbacks to online_policy_cpus and
- * acpi_processor_set_performance() has been called on
- * coverd_cpus. Best effort undo..
- */
-
- if (!cpus_empty(covered_cpus)) {
- for_each_cpu_mask(j, covered_cpus) {
- policy->cpu = j;
- acpi_processor_set_performance (data,
- j,
- cur_state);
- }
- }
-
- tmp = freqs.new;
- freqs.new = freqs.old;
- freqs.old = tmp;
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- }
- }
-
- set_cpus_allowed(current, saved_mask);
- return (result);
+ return result;
}
-
-static int
-acpi_cpufreq_verify (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_verify(struct cpufreq_policy *policy)
{
- unsigned int result = 0;
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_verify\n");
- result = cpufreq_frequency_table_verify(policy,
- data->freq_table);
-
- return (result);
+ return cpufreq_frequency_table_verify(policy, data->freq_table);
}
-
static unsigned long
-acpi_cpufreq_guess_freq (
- struct cpufreq_acpi_io *data,
- unsigned int cpu)
+acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
{
- struct acpi_processor_performance *perf = data->acpi_data;
+ struct acpi_processor_performance *perf = data->acpi_data;
if (cpu_khz) {
/* search the closest match to cpu_khz */
@@ -338,16 +502,16 @@
unsigned long freq;
unsigned long freqn = perf->states[0].core_frequency * 1000;
- for (i = 0; i < (perf->state_count - 1); i++) {
+ for (i=0; i<(perf->state_count-1); i++) {
freq = freqn;
freqn = perf->states[i+1].core_frequency * 1000;
if ((2 * cpu_khz) > (freqn + freq)) {
perf->state = i;
- return (freq);
+ return freq;
}
}
- perf->state = perf->state_count - 1;
- return (freqn);
+ perf->state = perf->state_count-1;
+ return freqn;
} else {
/* assume CPU is at P0... */
perf->state = 0;
@@ -355,7 +519,6 @@
}
}
-
/*
* acpi_cpufreq_early_init - initialize ACPI P-States library
*
@@ -364,30 +527,34 @@
* do _PDC and _PSD and find out the processor dependency for the
* actual init that will happen later...
*/
-static int acpi_cpufreq_early_init_acpi(void)
+static int acpi_cpufreq_early_init(void)
{
- struct acpi_processor_performance *data;
- unsigned int i, j;
+ struct acpi_processor_performance *data;
+ cpumask_t covered;
+ unsigned int i, j;
dprintk("acpi_cpufreq_early_init\n");
for_each_possible_cpu(i) {
- data = kzalloc(sizeof(struct acpi_processor_performance),
- GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_processor_performance),
+ GFP_KERNEL);
if (!data) {
- for_each_possible_cpu(j) {
+ for_each_cpu_mask(j, covered) {
kfree(acpi_perf_data[j]);
acpi_perf_data[j] = NULL;
}
- return (-ENOMEM);
+ return -ENOMEM;
}
acpi_perf_data[i] = data;
+ cpu_set(i, covered);
}
/* Do initialization in ACPI core */
- return acpi_processor_preregister_performance(acpi_perf_data);
+ acpi_processor_preregister_performance(acpi_perf_data);
+ return 0;
}
+#ifdef CONFIG_SMP
/*
* Some BIOSes do SW_ANY coordination internally, either set it up in hw
* or do it in BIOS firmware and won't inform about it to OS. If not
@@ -414,39 +581,42 @@
},
{ }
};
+#endif
-static int
-acpi_cpufreq_cpu_init (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- unsigned int i;
- unsigned int cpu = policy->cpu;
- struct cpufreq_acpi_io *data;
- unsigned int result = 0;
+ unsigned int i;
+ unsigned int valid_states = 0;
+ unsigned int cpu = policy->cpu;
+ struct acpi_cpufreq_data *data;
+ unsigned int result = 0;
struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
- struct acpi_processor_performance *perf;
+ struct acpi_processor_performance *perf;
dprintk("acpi_cpufreq_cpu_init\n");
if (!acpi_perf_data[cpu])
- return (-ENODEV);
+ return -ENODEV;
- data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL);
if (!data)
- return (-ENOMEM);
+ return -ENOMEM;
data->acpi_data = acpi_perf_data[cpu];
- acpi_io_data[cpu] = data;
+ drv_data[cpu] = data;
+
+ if (cpu_has(c, X86_FEATURE_CONSTANT_TSC))
+ acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
result = acpi_processor_register_performance(data->acpi_data, cpu);
-
if (result)
goto err_free;
perf = data->acpi_data;
policy->shared_type = perf->shared_type;
+
/*
- * Will let policy->cpus know about dependency only when software
+ * Will let policy->cpus know about dependency only when software
* coordination is required.
*/
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
@@ -462,10 +632,6 @@
}
#endif
- if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
- acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
- }
-
/* capability check */
if (perf->state_count <= 1) {
dprintk("No P-States\n");
@@ -473,17 +639,33 @@
goto err_unreg;
}
- if ((perf->control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) ||
- (perf->status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
- dprintk("Unsupported address space [%d, %d]\n",
- (u32) (perf->control_register.space_id),
- (u32) (perf->status_register.space_id));
+ if (perf->control_register.space_id != perf->status_register.space_id) {
result = -ENODEV;
goto err_unreg;
}
- /* alloc freq_table */
- data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * (perf->state_count + 1), GFP_KERNEL);
+ switch (perf->control_register.space_id) {
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ dprintk("SYSTEM IO addr space\n");
+ data->cpu_feature = SYSTEM_IO_CAPABLE;
+ break;
+ case ACPI_ADR_SPACE_FIXED_HARDWARE:
+ dprintk("HARDWARE addr space\n");
+ if (!check_est_cpu(cpu)) {
+ result = -ENODEV;
+ goto err_unreg;
+ }
+ data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE;
+ break;
+ default:
+ dprintk("Unknown addr space %d\n",
+ (u32) (perf->control_register.space_id));
+ result = -ENODEV;
+ goto err_unreg;
+ }
+
+ data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
+ (perf->state_count+1), GFP_KERNEL);
if (!data->freq_table) {
result = -ENOMEM;
goto err_unreg;
@@ -492,129 +674,140 @@
/* detect transition latency */
policy->cpuinfo.transition_latency = 0;
for (i=0; i<perf->state_count; i++) {
- if ((perf->states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency)
- policy->cpuinfo.transition_latency = perf->states[i].transition_latency * 1000;
+ if ((perf->states[i].transition_latency * 1000) >
+ policy->cpuinfo.transition_latency)
+ policy->cpuinfo.transition_latency =
+ perf->states[i].transition_latency * 1000;
}
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- /* The current speed is unknown and not detectable by ACPI... */
- policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
-
+ data->max_freq = perf->states[0].core_frequency * 1000;
/* table init */
- for (i=0; i<=perf->state_count; i++)
- {
- data->freq_table[i].index = i;
- if (i<perf->state_count)
- data->freq_table[i].frequency = perf->states[i].core_frequency * 1000;
- else
- data->freq_table[i].frequency = CPUFREQ_TABLE_END;
+ for (i=0; i<perf->state_count; i++) {
+ if (i>0 && perf->states[i].core_frequency ==
+ perf->states[i-1].core_frequency)
+ continue;
+
+ data->freq_table[valid_states].index = i;
+ data->freq_table[valid_states].frequency =
+ perf->states[i].core_frequency * 1000;
+ valid_states++;
}
+ data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
- if (result) {
+ if (result)
goto err_freqfree;
+
+ switch (data->cpu_feature) {
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ /* Current speed is unknown and not detectable by IO port */
+ policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
+ break;
+ case ACPI_ADR_SPACE_FIXED_HARDWARE:
+ acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
+ get_cur_freq_on_cpu(cpu);
+ break;
+ default:
+ break;
}
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management activated.\n",
- cpu);
+ /* Check for APERF/MPERF support in hardware */
+ if (c->x86_vendor == X86_VENDOR_INTEL && c->cpuid_level >= 6) {
+ unsigned int ecx;
+ ecx = cpuid_ecx(6);
+ if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY)
+ acpi_cpufreq_driver.getavg = get_measured_perf;
+ }
+
+ dprintk("CPU%u - ACPI performance management activated.\n", cpu);
for (i = 0; i < perf->state_count; i++)
dprintk(" %cP%d: %d MHz, %d mW, %d uS\n",
- (i == perf->state?'*':' '), i,
+ (i == perf->state ? '*' : ' '), i,
(u32) perf->states[i].core_frequency,
(u32) perf->states[i].power,
(u32) perf->states[i].transition_latency);
cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
-
+
/*
* the first call to ->target() should result in us actually
* writing something to the appropriate registers.
*/
data->resume = 1;
-
- return (result);
- err_freqfree:
+ return result;
+
+err_freqfree:
kfree(data->freq_table);
- err_unreg:
+err_unreg:
acpi_processor_unregister_performance(perf, cpu);
- err_free:
+err_free:
kfree(data);
- acpi_io_data[cpu] = NULL;
+ drv_data[cpu] = NULL;
- return (result);
+ return result;
}
-
-static int
-acpi_cpufreq_cpu_exit (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_cpu_exit\n");
if (data) {
cpufreq_frequency_table_put_attr(policy->cpu);
- acpi_io_data[policy->cpu] = NULL;
- acpi_processor_unregister_performance(data->acpi_data, policy->cpu);
+ drv_data[policy->cpu] = NULL;
+ acpi_processor_unregister_performance(data->acpi_data,
+ policy->cpu);
kfree(data);
}
- return (0);
+ return 0;
}
-static int
-acpi_cpufreq_resume (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_resume\n");
data->resume = 1;
- return (0);
+ return 0;
}
-
-static struct freq_attr* acpi_cpufreq_attr[] = {
+static struct freq_attr *acpi_cpufreq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver acpi_cpufreq_driver = {
- .verify = acpi_cpufreq_verify,
- .target = acpi_cpufreq_target,
- .init = acpi_cpufreq_cpu_init,
- .exit = acpi_cpufreq_cpu_exit,
- .resume = acpi_cpufreq_resume,
- .name = "acpi-cpufreq",
- .owner = THIS_MODULE,
- .attr = acpi_cpufreq_attr,
+ .verify = acpi_cpufreq_verify,
+ .target = acpi_cpufreq_target,
+ .init = acpi_cpufreq_cpu_init,
+ .exit = acpi_cpufreq_cpu_exit,
+ .resume = acpi_cpufreq_resume,
+ .name = "acpi-cpufreq",
+ .owner = THIS_MODULE,
+ .attr = acpi_cpufreq_attr,
};
-
-static int __init
-acpi_cpufreq_init (void)
+static int __init acpi_cpufreq_init(void)
{
dprintk("acpi_cpufreq_init\n");
- acpi_cpufreq_early_init_acpi();
+ acpi_cpufreq_early_init();
return cpufreq_register_driver(&acpi_cpufreq_driver);
}
-
-static void __exit
-acpi_cpufreq_exit (void)
+static void __exit acpi_cpufreq_exit(void)
{
- unsigned int i;
+ unsigned int i;
dprintk("acpi_cpufreq_exit\n");
cpufreq_unregister_driver(&acpi_cpufreq_driver);
@@ -627,7 +820,9 @@
}
module_param(acpi_pstate_strict, uint, 0644);
-MODULE_PARM_DESC(acpi_pstate_strict, "value 0 or non-zero. non-zero -> strict ACPI checks are performed during frequency changes.");
+MODULE_PARM_DESC(acpi_pstate_strict,
+ "value 0 or non-zero. non-zero -> strict ACPI checks are "
+ "performed during frequency changes.");
late_initcall(acpi_cpufreq_init);
module_exit(acpi_cpufreq_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
index 92afa3b..6667e9c 100644
--- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
@@ -447,7 +447,6 @@
int ret;
struct gxfreq_params *params;
struct pci_dev *gx_pci;
- u32 class_rev;
/* Test if we have the right hardware */
if ((gx_pci = gx_detect_chipset()) == NULL)
@@ -472,8 +471,7 @@
pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
- pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
- params->pci_rev = class_rev && 0xff;
+ pci_read_config_byte(params->cs55x0, PCI_REVISION_ID, ¶ms->pci_rev);
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
kfree(params);
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index 7233abe..c548daa 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -410,7 +410,7 @@
maxmult=longhaul_get_cpu_mult();
/* Starting with the 1.2GHz parts, theres a 200MHz bus. */
- if ((cpu_khz/1000) > 1200)
+ if ((cpu_khz/maxmult) > 13400)
fsb = 200;
else
fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
@@ -583,6 +583,10 @@
if (dev == NULL) {
reg = 0x76;
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL);
+ /* Find CN400 V-Link host bridge */
+ if (dev == NULL)
+ dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
+
}
if (dev != NULL) {
/* Enable access to port 0x22 */
@@ -734,7 +738,7 @@
return 0;
err_acpi:
- printk(KERN_ERR PFX "No ACPI support. No VT8601 or VT8623 northbridge. Aborting.\n");
+ printk(KERN_ERR PFX "No ACPI support. Unsupported northbridge. Aborting.\n");
return -ENODEV;
}
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
index 304d2ea..bec5017 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -163,29 +163,27 @@
static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
- if ((c->x86 == 0x06) && (c->x86_model == 0x09)) {
- /* Pentium M (Banias) */
- printk(KERN_WARNING PFX "Warning: Pentium M detected. "
- "The speedstep_centrino module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
- }
-
- if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
- /* Pentium M (Dothan) */
- printk(KERN_WARNING PFX "Warning: Pentium M detected. "
- "The speedstep_centrino module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
- /* on P-4s, the TSC runs with constant frequency independent whether
- * throttling is active or not. */
- p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ if (c->x86 == 0x06) {
+ if (cpu_has(c, X86_FEATURE_EST))
+ printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
+ "The acpi-cpufreq module offers voltage scaling"
+ " in addition of frequency scaling. You should use "
+ "that instead of p4-clockmod, if possible.\n");
+ switch (c->x86_model) {
+ case 0x0E: /* Core */
+ case 0x0F: /* Core Duo */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
+ case 0x0D: /* Pentium M (Dothan) */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ /* fall through */
+ case 0x09: /* Pentium M (Banias) */
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ }
}
if (c->x86 != 0xF) {
- printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <linux@brodo.de>\n");
+ printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n");
return 0;
}
diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
index ef457d5..b8fb4b5 100644
--- a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
+++ b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
@@ -153,6 +153,7 @@
static int __init sc520_freq_init(void)
{
struct cpuinfo_x86 *c = cpu_data;
+ int err;
/* Test if we have the right hardware */
if(c->x86_vendor != X86_VENDOR_AMD ||
@@ -166,7 +167,11 @@
return -ENOMEM;
}
- return cpufreq_register_driver(&sc520_freq_driver);
+ err = cpufreq_register_driver(&sc520_freq_driver);
+ if (err)
+ iounmap(cpuctl);
+
+ return err;
}
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index e8993ba..5113e92 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -36,6 +36,7 @@
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+#define INTEL_MSR_RANGE (0xffff)
struct cpu_id
{
@@ -379,6 +380,7 @@
}
+#ifdef CONFIG_SMP
/*
* Some BIOSes do SW_ANY coordination internally, either set it up in hw
* or do it in BIOS firmware and won't inform about it to OS. If not
@@ -392,7 +394,6 @@
return 0;
}
-
static struct dmi_system_id sw_any_bug_dmi_table[] = {
{
.callback = sw_any_bug_found,
@@ -405,7 +406,7 @@
},
{ }
};
-
+#endif
/*
* centrino_cpu_init_acpi - register with ACPI P-States library
@@ -463,8 +464,9 @@
}
for (i=0; i<p->state_count; i++) {
- if (p->states[i].control != p->states[i].status) {
- dprintk("Different control (%llu) and status values (%llu)\n",
+ if ((p->states[i].control & INTEL_MSR_RANGE) !=
+ (p->states[i].status & INTEL_MSR_RANGE)) {
+ dprintk("Different MSR bits in control (%llu) and status (%llu)\n",
p->states[i].control, p->states[i].status);
result = -EINVAL;
goto err_unreg;
@@ -500,7 +502,7 @@
}
for (i=0; i<p->state_count; i++) {
- centrino_model[cpu]->op_points[i].index = p->states[i].control;
+ centrino_model[cpu]->op_points[i].index = p->states[i].control & INTEL_MSR_RANGE;
centrino_model[cpu]->op_points[i].frequency = p->states[i].core_frequency * 1000;
dprintk("adding state %i with frequency %u and control value %04x\n",
i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index);
@@ -531,6 +533,9 @@
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
+ printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI"
+ "config is deprecated.\n "
+ "Use X86_ACPI_CPUFREQ (acpi-cpufreq instead.\n" );
return 0;
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
index 4f46cac..d59277c 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -123,6 +123,36 @@
return (msr_tmp * 100 * 1000);
}
+static unsigned int pentium_core_get_frequency(void)
+{
+ u32 fsb = 0;
+ u32 msr_lo, msr_tmp;
+
+ rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
+ /* see table B-2 of 25366920.pdf */
+ switch (msr_lo & 0x07) {
+ case 5:
+ fsb = 100000;
+ break;
+ case 1:
+ fsb = 133333;
+ break;
+ case 3:
+ fsb = 166667;
+ break;
+ default:
+ printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
+ }
+
+ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+ dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+
+ msr_tmp = (msr_lo >> 22) & 0x1f;
+ dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb));
+
+ return (msr_tmp * fsb);
+}
+
static unsigned int pentium4_get_frequency(void)
{
@@ -174,6 +204,8 @@
unsigned int speedstep_get_processor_frequency(unsigned int processor)
{
switch (processor) {
+ case SPEEDSTEP_PROCESSOR_PCORE:
+ return pentium_core_get_frequency();
case SPEEDSTEP_PROCESSOR_PM:
return pentiumM_get_frequency();
case SPEEDSTEP_PROCESSOR_P4D:
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
index b735429..b11bcc6 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
@@ -22,6 +22,7 @@
* the speedstep_get_processor_frequency() call. */
#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */
#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */
+#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */
/* speedstep states -- only two of them */
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
index c28333d..ff0d898 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -360,9 +360,6 @@
case SPEEDSTEP_PROCESSOR_PIII_C:
case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
break;
- case SPEEDSTEP_PROCESSOR_P4M:
- printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n");
- break;
default:
speedstep_processor = 0;
}
diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig
index ed39d6a..2f2a13e 100644
--- a/arch/powerpc/platforms/4xx/Kconfig
+++ b/arch/powerpc/platforms/4xx/Kconfig
@@ -179,7 +179,7 @@
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index ddbe398..b3c2ce4 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -35,7 +35,7 @@
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 692b5ba..8eb82ef 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -624,7 +624,7 @@
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
@@ -735,7 +735,7 @@
config LITE5200B
bool "Freescale LITE5200B"
- depends LITE5200
+ depends on LITE5200
help
Support for the LITE5200B dev board for the MPC5200 from Freescale.
This is the new board with 2 PCI slots.
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 293bd48..6980de4 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -189,7 +189,7 @@
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 286bc0b..b2e9762 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -334,13 +334,12 @@
size = transport->private_size + sizeof(struct uml_net_private) +
sizeof(((struct uml_net_private *) 0)->user);
- device = kmalloc(sizeof(*device), GFP_KERNEL);
+ device = kzalloc(sizeof(*device), GFP_KERNEL);
if (device == NULL) {
printk(KERN_ERR "eth_configure failed to allocate uml_net\n");
return(1);
}
- memset(device, 0, sizeof(*device));
INIT_LIST_HEAD(&device->list);
device->index = n;
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index bcf8258..f0d4d72 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -105,17 +105,17 @@
# currently support
config V850E_MA1
bool
- depends RTE_CB_MA1
+ depends on RTE_CB_MA1
default y
# Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
config V850E_TEG
bool
- depends RTE_CB_NB85E
+ depends on RTE_CB_NB85E
default y
# ... and the RTE-V850E/ME2-CB - V850E/ME2
config V850E_ME2
bool
- depends RTE_CB_ME2
+ depends on RTE_CB_ME2
default y
@@ -123,7 +123,7 @@
config V850E2_SIM85E2
bool
- depends V850E2_SIM85E2C || V850E2_SIM85E2S
+ depends on V850E2_SIM85E2C || V850E2_SIM85E2S
default y
@@ -132,7 +132,7 @@
# V850E2 processors
config V850E2
bool
- depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
+ depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
default y
@@ -141,7 +141,7 @@
# Boards in the RTE-x-CB series
config RTE_CB
bool
- depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
+ depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
default y
config RTE_CB_MULTI
@@ -149,28 +149,28 @@
# RTE_CB_NB85E can either have multi ROM support or not, but
# other platforms (currently only RTE_CB_MA1) require it.
prompt "Multi monitor ROM support" if RTE_CB_NB85E
- depends RTE_CB_MA1 || RTE_CB_NB85E
+ depends on RTE_CB_MA1 || RTE_CB_NB85E
default y
config RTE_CB_MULTI_DBTRAP
bool "Pass illegal insn trap / dbtrap to kernel"
- depends RTE_CB_MULTI
+ depends on RTE_CB_MULTI
default n
config RTE_CB_MA1_KSRAM
bool "Kernel in SRAM (limits size of kernel)"
- depends RTE_CB_MA1 && RTE_CB_MULTI
+ depends on RTE_CB_MA1 && RTE_CB_MULTI
default n
config RTE_MB_A_PCI
bool "Mother-A PCI support"
- depends RTE_CB
+ depends on RTE_CB
default y
# The GBUS is used to talk to the RTE-MOTHER-A board
config RTE_GBUS_INT
bool
- depends RTE_MB_A_PCI
+ depends on RTE_MB_A_PCI
default y
# The only PCI bus we support is on the RTE-MOTHER-A board
@@ -209,7 +209,7 @@
config ROM_KERNEL
bool "Kernel in ROM"
- depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
+ depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
# Some platforms pre-zero memory, in which case the kernel doesn't need to
config ZERO_BSS
@@ -225,10 +225,10 @@
config V850E_HIGHRES_TIMER
bool "High resolution timer support"
- depends V850E_TIMER_D
+ depends on V850E_TIMER_D
config TIME_BOOTUP
bool "Time bootup"
- depends V850E_HIGHRES_TIMER
+ depends on V850E_HIGHRES_TIMER
config RESET_GUARD
bool "Reset Guard"
diff --git a/arch/x86_64/kernel/cpufreq/Kconfig b/arch/x86_64/kernel/cpufreq/Kconfig
index 81f1562..3abcfa3 100644
--- a/arch/x86_64/kernel/cpufreq/Kconfig
+++ b/arch/x86_64/kernel/cpufreq/Kconfig
@@ -27,10 +27,13 @@
default y
config X86_SPEEDSTEP_CENTRINO
- tristate "Intel Enhanced SpeedStep"
+ tristate "Intel Enhanced SpeedStep (deprecated)"
select CPU_FREQ_TABLE
depends on ACPI_PROCESSOR
help
+ This is deprecated and this functionality is now merged into
+ acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+ speedstep_centrino.
This adds the CPUFreq driver for Enhanced SpeedStep enabled
mobile CPUs. This means Intel Pentium M (Centrino) CPUs
or 64bit enabled Intel Xeons.
@@ -50,6 +53,7 @@
help
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
+ This driver also supports Intel Enhanced Speedstep.
For details, take a look at <file:Documentation/cpu-freq/>.
diff --git a/arch/x86_64/kernel/cpufreq/Makefile b/arch/x86_64/kernel/cpufreq/Makefile
index d8b5938..753ce1d 100644
--- a/arch/x86_64/kernel/cpufreq/Makefile
+++ b/arch/x86_64/kernel/cpufreq/Makefile
@@ -5,8 +5,8 @@
SRCDIR := ../../../i386/kernel/cpu/cpufreq
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
diff --git a/drivers/acorn/char/i2c.c b/drivers/acorn/char/i2c.c
index bdb9c8b..9e584a7 100644
--- a/drivers/acorn/char/i2c.c
+++ b/drivers/acorn/char/i2c.c
@@ -360,7 +360,7 @@
if (ret >= 0){
ret = misc_register(&rtc_dev);
if(ret < 0)
- i2c_bit_del_bus(&ioc_ops);
+ i2c_del_adapter(&ioc_ops);
}
return ret;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b10f4d8..0a3aee2 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -867,7 +867,7 @@
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB022X
+ depends on TANBAC_TB022X
select GPIO_VR41XX
source "drivers/char/agp/Kconfig"
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index c603bf2..a9f9c48 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -86,7 +86,7 @@
config AGP_SIS
tristate "SiS chipset support"
- depends on AGP
+ depends on AGP && X86
help
This option gives you AGP support for the GLX component of
X on Silicon Integrated Systems [SiS] chipsets.
@@ -103,7 +103,7 @@
config AGP_VIA
tristate "VIA chipset support"
- depends on AGP
+ depends on AGP && X86
help
This option gives you AGP support for the GLX component of
X on VIA MVP3/Apollo Pro chipsets.
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 5ff457b..883a36a 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -419,6 +419,31 @@
*requested_mode &= ~AGP2_RESERVED_MASK;
}
+ /*
+ * Some dumb bridges are programmed to disobey the AGP2 spec.
+ * This is likely a BIOS misprogramming rather than poweron default, or
+ * it would be a lot more common.
+ * https://bugs.freedesktop.org/show_bug.cgi?id=8816
+ * AGPv2 spec 6.1.9 states:
+ * The RATE field indicates the data transfer rates supported by this
+ * device. A.G.P. devices must report all that apply.
+ * Fix them up as best we can.
+ */
+ switch (*bridge_agpstat & 7) {
+ case 4:
+ *bridge_agpstat |= (AGPSTAT2_2X | AGPSTAT2_1X);
+ printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x4 rate"
+ "Fixing up support for x2 & x1\n");
+ break;
+ case 2:
+ *bridge_agpstat |= AGPSTAT2_1X;
+ printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x2 rate"
+ "Fixing up support for x1\n");
+ break;
+ default:
+ break;
+ }
+
/* Check the speed bits make sense. Only one should be set. */
tmp = *requested_mode & 7;
switch (tmp) {
diff --git a/drivers/char/watchdog/at91rm9200_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c
index cb86967..38bd373 100644
--- a/drivers/char/watchdog/at91rm9200_wdt.c
+++ b/drivers/char/watchdog/at91rm9200_wdt.c
@@ -203,9 +203,9 @@
{
int res;
- if (at91wdt_miscdev.dev)
+ if (at91wdt_miscdev.parent)
return -EBUSY;
- at91wdt_miscdev.dev = &pdev->dev;
+ at91wdt_miscdev.parent = &pdev->dev;
res = misc_register(&at91wdt_miscdev);
if (res)
@@ -221,7 +221,7 @@
res = misc_deregister(&at91wdt_miscdev);
if (!res)
- at91wdt_miscdev.dev = NULL;
+ at91wdt_miscdev.parent = NULL;
return res;
}
diff --git a/drivers/char/watchdog/mpcore_wdt.c b/drivers/char/watchdog/mpcore_wdt.c
index 3404a9c..e88947f 100644
--- a/drivers/char/watchdog/mpcore_wdt.c
+++ b/drivers/char/watchdog/mpcore_wdt.c
@@ -347,7 +347,7 @@
goto err_free;
}
- mpcore_wdt_miscdev.dev = &dev->dev;
+ mpcore_wdt_miscdev.parent = &dev->dev;
ret = misc_register(&mpcore_wdt_miscdev);
if (ret) {
dev_printk(KERN_ERR, _dev, "cannot register miscdev on minor=%d (err=%d)\n",
diff --git a/drivers/char/watchdog/omap_wdt.c b/drivers/char/watchdog/omap_wdt.c
index 5dbd7dc..6c6f973 100644
--- a/drivers/char/watchdog/omap_wdt.c
+++ b/drivers/char/watchdog/omap_wdt.c
@@ -290,7 +290,7 @@
omap_wdt_disable();
omap_wdt_adjust_timeout(timer_margin);
- omap_wdt_miscdev.dev = &pdev->dev;
+ omap_wdt_miscdev.parent = &pdev->dev;
ret = misc_register(&omap_wdt_miscdev);
if (ret)
goto fail;
diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c
index 6113872..2da5ac9 100644
--- a/drivers/char/watchdog/pcwd_usb.c
+++ b/drivers/char/watchdog/pcwd_usb.c
@@ -42,6 +42,7 @@
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/mutex.h>
+#include <linux/hid.h> /* For HID_REQ_SET_REPORT & HID_DT_REPORT */
#ifdef CONFIG_USB_DEBUG
@@ -109,10 +110,6 @@
#define CMD_ENABLE_WATCHDOG 0x30 /* Enable / Disable Watchdog */
#define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG
-/* Some defines that I like to be somewhere else like include/linux/usb_hid.h */
-#define HID_REQ_SET_REPORT 0x09
-#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02)
-
/* We can only use 1 card due to the /dev/watchdog restriction */
static int cards_found;
diff --git a/drivers/char/watchdog/rm9k_wdt.c b/drivers/char/watchdog/rm9k_wdt.c
index ec39093..7576a13 100644
--- a/drivers/char/watchdog/rm9k_wdt.c
+++ b/drivers/char/watchdog/rm9k_wdt.c
@@ -47,7 +47,7 @@
/* Function prototypes */
-static irqreturn_t wdt_gpi_irqhdl(int, void *, struct pt_regs *);
+static irqreturn_t wdt_gpi_irqhdl(int, void *);
static void wdt_gpi_start(void);
static void wdt_gpi_stop(void);
static void wdt_gpi_set_timeout(unsigned int);
@@ -94,8 +94,28 @@
MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started");
+/* Kernel interfaces */
+static struct file_operations fops = {
+ .owner = THIS_MODULE,
+ .open = wdt_gpi_open,
+ .release = wdt_gpi_release,
+ .write = wdt_gpi_write,
+ .unlocked_ioctl = wdt_gpi_ioctl,
+};
+
+static struct miscdevice miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = wdt_gpi_name,
+ .fops = &fops,
+};
+
+static struct notifier_block wdt_gpi_shutdown = {
+ .notifier_call = wdt_gpi_notify,
+};
+
+
/* Interrupt handler */
-static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt, struct pt_regs *regs)
+static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt)
{
if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1))
return IRQ_NONE;
@@ -312,26 +332,6 @@
}
-/* Kernel interfaces */
-static struct file_operations fops = {
- .owner = THIS_MODULE,
- .open = wdt_gpi_open,
- .release = wdt_gpi_release,
- .write = wdt_gpi_write,
- .unlocked_ioctl = wdt_gpi_ioctl,
-};
-
-static struct miscdevice miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = wdt_gpi_name,
- .fops = &fops,
-};
-
-static struct notifier_block wdt_gpi_shutdown = {
- .notifier_call = wdt_gpi_notify,
-};
-
-
/* Init & exit procedures */
static const struct resource *
wdt_gpi_get_resource(struct platform_device *pdv, const char *name,
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 47ab42d..9fb2edf 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -29,7 +29,8 @@
#include <linux/completion.h>
#include <linux/mutex.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "cpufreq-core", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
+ "cpufreq-core", msg)
/**
* The "cpufreq driver" - the arch- or hardware-dependent low
@@ -151,7 +152,8 @@
spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
}
-void cpufreq_debug_printk(unsigned int type, const char *prefix, const char *fmt, ...)
+void cpufreq_debug_printk(unsigned int type, const char *prefix,
+ const char *fmt, ...)
{
char s[256];
va_list args;
@@ -161,7 +163,8 @@
WARN_ON(!prefix);
if (type & debug) {
spin_lock_irqsave(&disable_ratelimit_lock, flags);
- if (!disable_ratelimit && debug_ratelimit && !printk_ratelimit()) {
+ if (!disable_ratelimit && debug_ratelimit
+ && !printk_ratelimit()) {
spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
return;
}
@@ -182,10 +185,12 @@
module_param(debug, uint, 0644);
-MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core, 2 to debug drivers, and 4 to debug governors.");
+MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core,"
+ " 2 to debug drivers, and 4 to debug governors.");
module_param(debug_ratelimit, uint, 0644);
-MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging: set to 0 to disable ratelimiting.");
+MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging:"
+ " set to 0 to disable ratelimiting.");
#else /* !CONFIG_CPU_FREQ_DEBUG */
@@ -219,17 +224,23 @@
if (!l_p_j_ref_freq) {
l_p_j_ref = loops_per_jiffy;
l_p_j_ref_freq = ci->old;
- dprintk("saving %lu as reference value for loops_per_jiffy; freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
+ dprintk("saving %lu as reference value for loops_per_jiffy;"
+ "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
}
if ((val == CPUFREQ_PRECHANGE && ci->old < ci->new) ||
(val == CPUFREQ_POSTCHANGE && ci->old > ci->new) ||
(val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
- loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, ci->new);
- dprintk("scaling loops_per_jiffy to %lu for frequency %u kHz\n", loops_per_jiffy, ci->new);
+ loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
+ ci->new);
+ dprintk("scaling loops_per_jiffy to %lu"
+ "for frequency %u kHz\n", loops_per_jiffy, ci->new);
}
}
#else
-static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) { return; }
+static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
+{
+ return;
+}
#endif
@@ -316,7 +327,8 @@
if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_PERFORMANCE;
err = 0;
- } else if (!strnicmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) {
+ } else if (!strnicmp(str_governor, "powersave",
+ CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_POWERSAVE;
err = 0;
}
@@ -328,7 +340,8 @@
t = __find_governor(str_governor);
if (t == NULL) {
- char *name = kasprintf(GFP_KERNEL, "cpufreq_%s", str_governor);
+ char *name = kasprintf(GFP_KERNEL, "cpufreq_%s",
+ str_governor);
if (name) {
int ret;
@@ -361,7 +374,8 @@
/**
- * cpufreq_per_cpu_attr_read() / show_##file_name() - print out cpufreq information
+ * cpufreq_per_cpu_attr_read() / show_##file_name() -
+ * print out cpufreq information
*
* Write out information from cpufreq_driver->policy[cpu]; object must be
* "unsigned int".
@@ -380,7 +394,8 @@
show_one(scaling_max_freq, max);
show_one(scaling_cur_freq, cur);
-static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy);
+static int __cpufreq_set_policy(struct cpufreq_policy *data,
+ struct cpufreq_policy *policy);
/**
* cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access
@@ -416,7 +431,8 @@
/**
* show_cpuinfo_cur_freq - current CPU frequency as detected by hardware
*/
-static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy, char *buf)
+static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy,
+ char *buf)
{
unsigned int cur_freq = cpufreq_get(policy->cpu);
if (!cur_freq)
@@ -428,7 +444,8 @@
/**
* show_scaling_governor - show the current policy for the specified CPU
*/
-static ssize_t show_scaling_governor (struct cpufreq_policy * policy, char *buf)
+static ssize_t show_scaling_governor (struct cpufreq_policy * policy,
+ char *buf)
{
if(policy->policy == CPUFREQ_POLICY_POWERSAVE)
return sprintf(buf, "powersave\n");
@@ -458,7 +475,8 @@
if (ret != 1)
return -EINVAL;
- if (cpufreq_parse_governor(str_governor, &new_policy.policy, &new_policy.governor))
+ if (cpufreq_parse_governor(str_governor, &new_policy.policy,
+ &new_policy.governor))
return -EINVAL;
lock_cpu_hotplug();
@@ -474,7 +492,10 @@
unlock_cpu_hotplug();
- return ret ? ret : count;
+ if (ret)
+ return ret;
+ else
+ return count;
}
/**
@@ -488,7 +509,7 @@
/**
* show_scaling_available_governors - show the available CPUfreq governors
*/
-static ssize_t show_scaling_available_governors (struct cpufreq_policy * policy,
+static ssize_t show_scaling_available_governors (struct cpufreq_policy *policy,
char *buf)
{
ssize_t i = 0;
@@ -574,7 +595,11 @@
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
- ret = fattr->show ? fattr->show(policy,buf) : -EIO;
+ if (fattr->show)
+ ret = fattr->show(policy, buf);
+ else
+ ret = -EIO;
+
cpufreq_cpu_put(policy);
return ret;
}
@@ -588,7 +613,11 @@
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
- ret = fattr->store ? fattr->store(policy,buf,count) : -EIO;
+ if (fattr->store)
+ ret = fattr->store(policy, buf, count);
+ else
+ ret = -EIO;
+
cpufreq_cpu_put(policy);
return ret;
}
@@ -913,7 +942,8 @@
* We adjust to current frequency first, and need to clean up later. So either call
* to cpufreq_update_policy() or schedule handle_update()).
*/
-static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigned int new_freq)
+static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
+ unsigned int new_freq)
{
struct cpufreq_freqs freqs;
@@ -938,16 +968,16 @@
unsigned int cpufreq_quick_get(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- unsigned int ret = 0;
+ unsigned int ret_freq = 0;
if (policy) {
mutex_lock(&policy->lock);
- ret = policy->cur;
+ ret_freq = policy->cur;
mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
}
- return (ret);
+ return (ret_freq);
}
EXPORT_SYMBOL(cpufreq_quick_get);
@@ -961,7 +991,7 @@
unsigned int cpufreq_get(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- unsigned int ret = 0;
+ unsigned int ret_freq = 0;
if (!policy)
return 0;
@@ -971,12 +1001,14 @@
mutex_lock(&policy->lock);
- ret = cpufreq_driver->get(cpu);
+ ret_freq = cpufreq_driver->get(cpu);
- if (ret && policy->cur && !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- /* verify no discrepancy between actual and saved value exists */
- if (unlikely(ret != policy->cur)) {
- cpufreq_out_of_sync(cpu, policy->cur, ret);
+ if (ret_freq && policy->cur &&
+ !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
+ /* verify no discrepancy between actual and
+ saved value exists */
+ if (unlikely(ret_freq != policy->cur)) {
+ cpufreq_out_of_sync(cpu, policy->cur, ret_freq);
schedule_work(&policy->update);
}
}
@@ -986,7 +1018,7 @@
out:
cpufreq_cpu_put(policy);
- return (ret);
+ return (ret_freq);
}
EXPORT_SYMBOL(cpufreq_get);
@@ -998,7 +1030,7 @@
static int cpufreq_suspend(struct sys_device * sysdev, pm_message_t pmsg)
{
int cpu = sysdev->id;
- unsigned int ret = 0;
+ int ret = 0;
unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
@@ -1080,7 +1112,7 @@
static int cpufreq_resume(struct sys_device * sysdev)
{
int cpu = sysdev->id;
- unsigned int ret = 0;
+ int ret = 0;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
@@ -1276,22 +1308,45 @@
}
EXPORT_SYMBOL_GPL(cpufreq_driver_target);
+int cpufreq_driver_getavg(struct cpufreq_policy *policy)
+{
+ int ret = 0;
+
+ policy = cpufreq_cpu_get(policy->cpu);
+ if (!policy)
+ return -EINVAL;
+
+ mutex_lock(&policy->lock);
+
+ if (cpu_online(policy->cpu) && cpufreq_driver->getavg)
+ ret = cpufreq_driver->getavg(policy->cpu);
+
+ mutex_unlock(&policy->lock);
+
+ cpufreq_cpu_put(policy);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_getavg);
+
/*
* Locking: Must be called with the lock_cpu_hotplug() lock held
* when "event" is CPUFREQ_GOV_LIMITS
*/
-static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
+static int __cpufreq_governor(struct cpufreq_policy *policy,
+ unsigned int event)
{
int ret;
if (!try_module_get(policy->governor->owner))
return -EINVAL;
- dprintk("__cpufreq_governor for CPU %u, event %u\n", policy->cpu, event);
+ dprintk("__cpufreq_governor for CPU %u, event %u\n",
+ policy->cpu, event);
ret = policy->governor->governor(policy, event);
- /* we keep one module reference alive for each CPU governed by this CPU */
+ /* we keep one module reference alive for
+ each CPU governed by this CPU */
if ((event != CPUFREQ_GOV_START) || ret)
module_put(policy->governor->owner);
if ((event == CPUFREQ_GOV_STOP) && !ret)
@@ -1367,9 +1422,12 @@
/*
+ * data : current policy.
+ * policy : policy to be set.
* Locking: Must be called with the lock_cpu_hotplug() lock held
*/
-static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy)
+static int __cpufreq_set_policy(struct cpufreq_policy *data,
+ struct cpufreq_policy *policy)
{
int ret = 0;
@@ -1377,7 +1435,8 @@
dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
policy->min, policy->max);
- memcpy(&policy->cpuinfo, &data->cpuinfo, sizeof(struct cpufreq_cpuinfo));
+ memcpy(&policy->cpuinfo, &data->cpuinfo,
+ sizeof(struct cpufreq_cpuinfo));
if (policy->min > data->min && policy->min > policy->max) {
ret = -EINVAL;
@@ -1410,7 +1469,8 @@
data->min = policy->min;
data->max = policy->max;
- dprintk("new min and max freqs are %u - %u kHz\n", data->min, data->max);
+ dprintk("new min and max freqs are %u - %u kHz\n",
+ data->min, data->max);
if (cpufreq_driver->setpolicy) {
data->policy = policy->policy;
@@ -1431,10 +1491,12 @@
data->governor = policy->governor;
if (__cpufreq_governor(data, CPUFREQ_GOV_START)) {
/* new governor failed, so re-start old one */
- dprintk("starting governor %s failed\n", data->governor->name);
+ dprintk("starting governor %s failed\n",
+ data->governor->name);
if (old_gov) {
data->governor = old_gov;
- __cpufreq_governor(data, CPUFREQ_GOV_START);
+ __cpufreq_governor(data,
+ CPUFREQ_GOV_START);
}
ret = -EINVAL;
goto error_out;
@@ -1524,7 +1586,8 @@
data->cur = policy.cur;
} else {
if (data->cur != policy.cur)
- cpufreq_out_of_sync(cpu, data->cur, policy.cur);
+ cpufreq_out_of_sync(cpu, data->cur,
+ policy.cur);
}
}
@@ -1626,8 +1689,10 @@
/* if all ->init() calls failed, unregister */
if (ret) {
- dprintk("no CPU initialized for driver %s\n", driver_data->name);
- sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
+ dprintk("no CPU initialized for driver %s\n",
+ driver_data->name);
+ sysdev_driver_unregister(&cpu_sysdev_class,
+ &cpufreq_sysdev_driver);
spin_lock_irqsave(&cpufreq_driver_lock, flags);
cpufreq_driver = NULL;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 5ef5ede..eef0270 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -44,15 +44,17 @@
* latency of the processor. The governor will work on any processor with
* transition latency <= 10mS, using appropriate sampling
* rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
+ * For CPUs with transition latency > 10mS (mostly drivers
+ * with CPUFREQ_ETERNAL), this governor will not work.
* All times here are in uS.
*/
static unsigned int def_sampling_rate;
#define MIN_SAMPLING_RATE_RATIO (2)
/* for correct statistics, we need at least 10 ticks between each measure */
-#define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
-#define MIN_SAMPLING_RATE (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
+#define MIN_STAT_SAMPLING_RATE \
+ (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
+#define MIN_SAMPLING_RATE \
+ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000)
#define DEF_SAMPLING_DOWN_FACTOR (1)
@@ -103,11 +105,16 @@
static inline unsigned int get_cpu_idle_time(unsigned int cpu)
{
- return kstat_cpu(cpu).cpustat.idle +
+ unsigned int add_nice = 0, ret;
+
+ if (dbs_tuners_ins.ignore_nice)
+ add_nice = kstat_cpu(cpu).cpustat.nice;
+
+ ret = kstat_cpu(cpu).cpustat.idle +
kstat_cpu(cpu).cpustat.iowait +
- ( dbs_tuners_ins.ignore_nice ?
- kstat_cpu(cpu).cpustat.nice :
- 0);
+ add_nice;
+
+ return ret;
}
/************************** sysfs interface ************************/
@@ -452,6 +459,7 @@
unsigned int cpu = policy->cpu;
struct cpu_dbs_info_s *this_dbs_info;
unsigned int j;
+ int rc;
this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
@@ -468,6 +476,13 @@
break;
mutex_lock(&dbs_mutex);
+
+ rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
+ if (rc) {
+ mutex_unlock(&dbs_mutex);
+ return rc;
+ }
+
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -480,7 +495,7 @@
this_dbs_info->enable = 1;
this_dbs_info->down_skip = 0;
this_dbs_info->requested_freq = policy->cur;
- sysfs_create_group(&policy->kobj, &dbs_attr_group);
+
dbs_enable++;
/*
* Start the timerschedule work, when this governor
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index e1cc511..f697449 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -41,8 +41,10 @@
static unsigned int def_sampling_rate;
#define MIN_SAMPLING_RATE_RATIO (2)
/* for correct statistics, we need at least 10 ticks between each measure */
-#define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
-#define MIN_SAMPLING_RATE (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
+#define MIN_STAT_SAMPLING_RATE \
+ (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
+#define MIN_SAMPLING_RATE \
+ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000)
#define TRANSITION_LATENCY_LIMIT (10 * 1000)
@@ -206,7 +208,8 @@
ret = sscanf(buf, "%u", &input);
mutex_lock(&dbs_mutex);
- if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
+ if (ret != 1 || input > MAX_SAMPLING_RATE
+ || input < MIN_SAMPLING_RATE) {
mutex_unlock(&dbs_mutex);
return -EINVAL;
}
@@ -397,8 +400,15 @@
* policy. To be safe, we focus 10 points under the threshold.
*/
if (load < (dbs_tuners_ins.up_threshold - 10)) {
- unsigned int freq_next = (policy->cur * load) /
+ unsigned int freq_next, freq_cur;
+
+ freq_cur = cpufreq_driver_getavg(policy);
+ if (!freq_cur)
+ freq_cur = policy->cur;
+
+ freq_next = (freq_cur * load) /
(dbs_tuners_ins.up_threshold - 10);
+
if (!dbs_tuners_ins.powersave_bias) {
__cpufreq_driver_target(policy, freq_next,
CPUFREQ_RELATION_L);
@@ -472,6 +482,7 @@
unsigned int cpu = policy->cpu;
struct cpu_dbs_info_s *this_dbs_info;
unsigned int j;
+ int rc;
this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
@@ -494,12 +505,23 @@
if (dbs_enable == 1) {
kondemand_wq = create_workqueue("kondemand");
if (!kondemand_wq) {
- printk(KERN_ERR "Creation of kondemand failed\n");
+ printk(KERN_ERR
+ "Creation of kondemand failed\n");
dbs_enable--;
mutex_unlock(&dbs_mutex);
return -ENOSPC;
}
}
+
+ rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
+ if (rc) {
+ if (dbs_enable == 1)
+ destroy_workqueue(kondemand_wq);
+ dbs_enable--;
+ mutex_unlock(&dbs_mutex);
+ return rc;
+ }
+
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -509,7 +531,6 @@
j_dbs_info->prev_cpu_wall = get_jiffies_64();
}
this_dbs_info->enable = 1;
- sysfs_create_group(&policy->kobj, &dbs_attr_group);
/*
* Start the timerschedule work, when this governor
* is used for first time
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index de91e33..e8e1451 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -15,7 +15,8 @@
#include <linux/cpufreq.h>
#include <linux/init.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
static int cpufreq_governor_performance(struct cpufreq_policy *policy,
@@ -24,8 +25,10 @@
switch (event) {
case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS:
- dprintk("setting to %u kHz because of event %u\n", policy->max, event);
- __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H);
+ dprintk("setting to %u kHz because of event %u\n",
+ policy->max, event);
+ __cpufreq_driver_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
break;
default:
break;
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index 0a25960..13fe06b 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -15,7 +15,8 @@
#include <linux/cpufreq.h>
#include <linux/init.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
static int cpufreq_governor_powersave(struct cpufreq_policy *policy,
unsigned int event)
@@ -23,8 +24,10 @@
switch (event) {
case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS:
- dprintk("setting to %u kHz because of event %u\n", policy->min, event);
- __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L);
+ dprintk("setting to %u kHz because of event %u\n",
+ policy->min, event);
+ __cpufreq_driver_target(policy, policy->min,
+ CPUFREQ_RELATION_L);
break;
default:
break;
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index c2ecc59..6742b1a 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -351,8 +351,8 @@
register_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
for_each_online_cpu(cpu) {
- cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_ONLINE,
- (void *)(long)cpu);
+ cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier,
+ CPU_ONLINE, (void *)(long)cpu);
}
return 0;
}
@@ -368,14 +368,15 @@
unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
lock_cpu_hotplug();
for_each_online_cpu(cpu) {
- cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_DEAD,
- (void *)(long)cpu);
+ cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier,
+ CPU_DEAD, (void *)(long)cpu);
}
unlock_cpu_hotplug();
}
MODULE_AUTHOR ("Zou Nan hai <nanhai.zou@intel.com>");
-MODULE_DESCRIPTION ("'cpufreq_stats' - A driver to export cpufreq stats through sysfs filesystem");
+MODULE_DESCRIPTION ("'cpufreq_stats' - A driver to export cpufreq stats"
+ "through sysfs filesystem");
MODULE_LICENSE ("GPL");
module_init(cpufreq_stats_init);
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index a06c204..2a4eb0b 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -131,19 +131,26 @@
unsigned int event)
{
unsigned int cpu = policy->cpu;
+ int rc = 0;
+
switch (event) {
case CPUFREQ_GOV_START:
if (!cpu_online(cpu))
return -EINVAL;
BUG_ON(!policy->cur);
mutex_lock(&userspace_mutex);
+ rc = sysfs_create_file (&policy->kobj,
+ &freq_attr_scaling_setspeed.attr);
+ if (rc)
+ goto start_out;
+
cpu_is_managed[cpu] = 1;
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
cpu_cur_freq[cpu] = policy->cur;
cpu_set_freq[cpu] = policy->cur;
- sysfs_create_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
dprintk("managing cpu %u started (%u - %u kHz, currently %u kHz)\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu]);
+start_out:
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_STOP:
@@ -180,7 +187,7 @@
mutex_unlock(&userspace_mutex);
break;
}
- return 0;
+ return rc;
}
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 551f4cc..e749092 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -9,7 +9,8 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
/*********************************************************************
* FREQUENCY TABLE HELPERS *
@@ -29,7 +30,8 @@
continue;
}
- dprintk("table entry %u: %u kHz, %u index\n", i, freq, table[i].index);
+ dprintk("table entry %u: %u kHz, %u index\n",
+ i, freq, table[i].index);
if (freq < min_freq)
min_freq = freq;
if (freq > max_freq)
@@ -54,13 +56,14 @@
unsigned int i;
unsigned int count = 0;
- dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
+ dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n",
+ policy->min, policy->max, policy->cpu);
if (!cpu_online(policy->cpu))
return -EINVAL;
- cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
unsigned int freq = table[i].frequency;
@@ -75,10 +78,11 @@
if (!count)
policy->max = next_larger;
- cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
- dprintk("verification lead to (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
+ dprintk("verification lead to (%u - %u kHz) for cpu %u\n",
+ policy->min, policy->max, policy->cpu);
return 0;
}
@@ -101,7 +105,8 @@
};
unsigned int i;
- dprintk("request for target %u kHz (relation: %u) for cpu %u\n", target_freq, relation, policy->cpu);
+ dprintk("request for target %u kHz (relation: %u) for cpu %u\n",
+ target_freq, relation, policy->cpu);
switch (relation) {
case CPUFREQ_RELATION_H:
@@ -192,7 +197,10 @@
}
struct freq_attr cpufreq_freq_attr_scaling_available_freqs = {
- .attr = { .name = "scaling_available_frequencies", .mode = 0444, .owner=THIS_MODULE },
+ .attr = { .name = "scaling_available_frequencies",
+ .mode = 0444,
+ .owner=THIS_MODULE
+ },
.show = show_available_freqs,
};
EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index c034820..af02034 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -38,17 +38,6 @@
This support is also available as a module. If so, the module
will be called i2c-algo-pca.
-config I2C_ALGOITE
- tristate "ITE I2C Algorithm"
- depends on MIPS_ITE8172 && I2C
- help
- This supports the use of the ITE8172 I2C interface found on some MIPS
- systems. Say Y if you have one of these. You should also say Y for
- the ITE I2C peripheral driver support below.
-
- This support is also available as a module. If so, the module
- will be called i2c-algo-ite.
-
config I2C_ALGO8XX
tristate "MPC8xx CPM I2C interface"
depends on 8xx && I2C
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index 208be04..cac1051 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o
-obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o
obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o
ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 21c36bf..95aa539 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -540,15 +540,7 @@
return i2c_add_adapter(adap);
}
-
-
-int i2c_bit_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_bit_add_bus);
-EXPORT_SYMBOL(i2c_bit_del_bus);
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm");
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
deleted file mode 100644
index 70d8eef..0000000
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ /dev/null
@@ -1,806 +0,0 @@
-/*
- -------------------------------------------------------------------------
- i2c-algo-ite.c i2c driver algorithms for ITE adapters
-
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2000 MontaVista Software Inc.
-
- ---------------------------------------------------------------------------
- This file was highly leveraged from i2c-algo-pcf.c, which was created
- by Simon G. Vogl and Hans Berglund:
-
-
- Copyright (C) 1995-1997 Simon G. Vogl
- 1998-2000 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
- Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
- <mbailey@littlefeet-inc.com> */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include "i2c-algo-ite.h"
-
-#define PM_DSR IT8172_PCI_IO_BASE + IT_PM_DSR
-#define PM_IBSR IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04
-#define GPIO_CCR IT8172_PCI_IO_BASE + IT_GPCCR
-
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
-#define DEF_TIMEOUT 16
-
-
-/* module parameters:
- */
-static int i2c_debug;
-static int iic_test; /* see if the line-setting functions work */
-
-/* --- setting states on the bus with the right timing: --------------- */
-
-#define get_clock(adap) adap->getclock(adap->data)
-#define iic_outw(adap, reg, val) adap->setiic(adap->data, reg, val)
-#define iic_inw(adap, reg) adap->getiic(adap->data, reg)
-
-
-/* --- other auxiliary functions -------------------------------------- */
-
-static void iic_start(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap,ITE_I2CHCR,ITE_CMD);
-}
-
-static void iic_stop(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap,ITE_I2CHCR,0);
- iic_outw(adap,ITE_I2CHSR,ITE_I2CHSR_TDI);
-}
-
-static void iic_reset(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap, PM_IBSR, iic_inw(adap, PM_IBSR) | 0x80);
-}
-
-
-static int wait_for_bb(struct i2c_algo_iic_data *adap)
-{
- int timeout = DEF_TIMEOUT;
- short status;
-
- status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
- while (timeout-- && (status & ITE_I2CHSR_HB)) {
- udelay(1000); /* How much is this? */
- status = iic_inw(adap, ITE_I2CHSR);
- }
-#endif
- if (timeout<=0) {
- printk(KERN_ERR "Timeout, host is busy\n");
- iic_reset(adap);
- }
- return(timeout<=0);
-}
-
-/* After we issue a transaction on the IIC bus, this function
- * is called. It puts this process to sleep until we get an interrupt from
- * from the controller telling us that the transaction we requested in complete.
- */
-static int wait_for_pin(struct i2c_algo_iic_data *adap, short *status) {
-
- int timeout = DEF_TIMEOUT;
-
- timeout = wait_for_bb(adap);
- if (timeout) {
- DEB2(printk("Timeout waiting for host not busy\n");)
- return -EIO;
- }
- timeout = DEF_TIMEOUT;
-
- *status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
- while (timeout-- && !(*status & ITE_I2CHSR_TDI)) {
- adap->waitforpin();
- *status = iic_inw(adap, ITE_I2CHSR);
- }
-#endif
- if (timeout <= 0)
- return(-1);
- else
- return(0);
-}
-
-static int wait_for_fe(struct i2c_algo_iic_data *adap, short *status)
-{
- int timeout = DEF_TIMEOUT;
-
- *status = iic_inw(adap, ITE_I2CFSR);
-#ifndef STUB_I2C
- while (timeout-- && (*status & ITE_I2CFSR_FE)) {
- udelay(1000);
- iic_inw(adap, ITE_I2CFSR);
- }
-#endif
- if (timeout <= 0)
- return(-1);
- else
- return(0);
-}
-
-static int iic_init (struct i2c_algo_iic_data *adap)
-{
- short i;
-
- /* Clear bit 7 to set I2C to normal operation mode */
- i=iic_inw(adap, PM_DSR)& 0xff7f;
- iic_outw(adap, PM_DSR, i);
-
- /* set IT_GPCCR port C bit 2&3 as function 2 */
- i = iic_inw(adap, GPIO_CCR) & 0xfc0f;
- iic_outw(adap,GPIO_CCR,i);
-
- /* Clear slave address/sub-address */
- iic_outw(adap,ITE_I2CSAR, 0);
- iic_outw(adap,ITE_I2CSSAR, 0);
-
- /* Set clock counter register */
- iic_outw(adap,ITE_I2CCKCNT, get_clock(adap));
-
- /* Set START/reSTART/STOP time registers */
- iic_outw(adap,ITE_I2CSHDR, 0x0a);
- iic_outw(adap,ITE_I2CRSUR, 0x0a);
- iic_outw(adap,ITE_I2CPSUR, 0x0a);
-
- /* Enable interrupts on completing the current transaction */
- iic_outw(adap,ITE_I2CHCR, ITE_I2CHCR_IE | ITE_I2CHCR_HCE);
-
- /* Clear transfer count */
- iic_outw(adap,ITE_I2CFBCR, 0x0);
-
- DEB2(printk("iic_init: Initialized IIC on ITE 0x%x\n",
- iic_inw(adap, ITE_I2CHSR)));
- return 0;
-}
-
-
-/*
- * Sanity check for the adapter hardware - check the reaction of
- * the bus lines only if it seems to be idle.
- */
-static int test_bus(struct i2c_algo_iic_data *adap, char *name) {
-#if 0
- int scl,sda;
- sda=getsda(adap);
- if (adap->getscl==NULL) {
- printk("test_bus: Warning: Adapter can't read from clock line - skipping test.\n");
- return 0;
- }
- scl=getscl(adap);
- printk("test_bus: Adapter: %s scl: %d sda: %d -- testing...\n",
- name,getscl(adap),getsda(adap));
- if (!scl || !sda ) {
- printk("test_bus: %s seems to be busy.\n",adap->name);
- goto bailout;
- }
- sdalo(adap);
- printk("test_bus:1 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 != getsda(adap) ) {
- printk("test_bus: %s SDA stuck high!\n",name);
- sdahi(adap);
- goto bailout;
- }
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL unexpected low while pulling SDA low!\n",
- name);
- goto bailout;
- }
- sdahi(adap);
- printk("test_bus:2 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA stuck low!\n",name);
- sdahi(adap);
- goto bailout;
- }
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL unexpected low while SDA high!\n",
- adap->name);
- goto bailout;
- }
- scllo(adap);
- printk("test_bus:3 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 != getscl(adap) ) {
-
- sclhi(adap);
- goto bailout;
- }
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA unexpected low while pulling SCL low!\n",
- name);
- goto bailout;
- }
- sclhi(adap);
- printk("test_bus:4 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL stuck low!\n",name);
- sclhi(adap);
- goto bailout;
- }
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA unexpected low while SCL high!\n",
- name);
- goto bailout;
- }
- printk("test_bus: %s passed test.\n",name);
- return 0;
-bailout:
- sdahi(adap);
- sclhi(adap);
- return -ENODEV;
-#endif
- return (0);
-}
-
-/* ----- Utility functions
- */
-
-
-/* Verify the device we want to talk to on the IIC bus really exists. */
-static inline int try_address(struct i2c_algo_iic_data *adap,
- unsigned int addr, int retries)
-{
- int i, ret = -1;
- short status;
-
- for (i=0;i<retries;i++) {
- iic_outw(adap, ITE_I2CSAR, addr);
- iic_start(adap);
- if (wait_for_pin(adap, &status) == 0) {
- if ((status & ITE_I2CHSR_DNE) == 0) {
- iic_stop(adap);
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
- ret=1;
- break; /* success! */
- }
- }
- iic_stop(adap);
- udelay(adap->udelay);
- }
- DEB2(if (i) printk("try_address: needed %d retries for 0x%x\n",i,
- addr));
- return ret;
-}
-
-
-static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf,
- int count)
-{
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- int wrcount=0, timeout;
- short status;
- int loops, remainder, i, j;
- union {
- char byte[2];
- unsigned short word;
- } tmp;
-
- iic_outw(adap, ITE_I2CSSAR, (unsigned short)buf[wrcount++]);
- count--;
- if (count == 0)
- return -EIO;
-
- loops = count / 32; /* 32-byte FIFO */
- remainder = count % 32;
-
- if(loops) {
- for(i=0; i<loops; i++) {
-
- iic_outw(adap, ITE_I2CFBCR, 32);
- for(j=0; j<32/2; j++) {
- tmp.byte[1] = buf[wrcount++];
- tmp.byte[0] = buf[wrcount++];
- iic_outw(adap, ITE_I2CFDR, tmp.word);
- }
-
- /* status FIFO overrun */
- iic_inw(adap, ITE_I2CFSR);
- iic_inw(adap, ITE_I2CFBCR);
-
- iic_outw(adap, ITE_I2CHCR, ITE_WRITE); /* Issue WRITE command */
-
- /* Wait for transmission to complete */
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
- }
- }
- if(remainder) {
- iic_outw(adap, ITE_I2CFBCR, remainder);
- for(i=0; i<remainder/2; i++) {
- tmp.byte[1] = buf[wrcount++];
- tmp.byte[0] = buf[wrcount++];
- iic_outw(adap, ITE_I2CFDR, tmp.word);
- }
-
- /* status FIFO overrun */
- iic_inw(adap, ITE_I2CFSR);
- iic_inw(adap, ITE_I2CFBCR);
-
- iic_outw(adap, ITE_I2CHCR, ITE_WRITE); /* Issue WRITE command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
-#endif
- }
- iic_stop(adap);
- return wrcount;
-}
-
-
-static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count,
- int sread)
-{
- int rdcount=0, i, timeout;
- short status;
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- int loops, remainder, j;
- union {
- char byte[2];
- unsigned short word;
- } tmp;
-
- loops = count / 32; /* 32-byte FIFO */
- remainder = count % 32;
-
- if(loops) {
- for(i=0; i<loops; i++) {
- iic_outw(adap, ITE_I2CFBCR, 32);
- if (sread)
- iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
- else
- iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s read timeout.\n", i2c_adap->name);
- return (-1);
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
- return (-1);
- }
-#endif
-
- timeout = wait_for_fe(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name);
- return (-1);
- }
-
- for(j=0; j<32/2; j++) {
- tmp.word = iic_inw(adap, ITE_I2CFDR);
- buf[rdcount++] = tmp.byte[1];
- buf[rdcount++] = tmp.byte[0];
- }
-
- /* status FIFO underrun */
- iic_inw(adap, ITE_I2CFSR);
-
- }
- }
-
-
- if(remainder) {
- remainder=(remainder+1)/2 * 2;
- iic_outw(adap, ITE_I2CFBCR, remainder);
- if (sread)
- iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
- else
- iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s read timeout.\n", i2c_adap->name);
- return (-1);
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
- return (-1);
- }
-#endif
- timeout = wait_for_fe(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name);
- return (-1);
- }
-
- for(i=0; i<(remainder+1)/2; i++) {
- tmp.word = iic_inw(adap, ITE_I2CFDR);
- buf[rdcount++] = tmp.byte[1];
- buf[rdcount++] = tmp.byte[0];
- }
-
- /* status FIFO underrun */
- iic_inw(adap, ITE_I2CFSR);
-
- }
-
- iic_stop(adap);
- return rdcount;
-}
-
-
-/* This function implements combined transactions. Combined
- * transactions consist of combinations of reading and writing blocks of data.
- * Each transfer (i.e. a read or a write) is separated by a repeated start
- * condition.
- */
-#if 0
-static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
-{
- int i;
- struct i2c_msg *pmsg;
- int ret;
-
- DEB2(printk("Beginning combined transaction\n"));
-
- for(i=0; i<(num-1); i++) {
- pmsg = &msgs[i];
- if(pmsg->flags & I2C_M_RD) {
- DEB2(printk(" This one is a read\n"));
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
- }
- else if(!(pmsg->flags & I2C_M_RD)) {
- DEB2(printk("This one is a write\n"));
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
- }
- }
- /* Last read or write segment needs to be terminated with a stop */
- pmsg = &msgs[i];
-
- if(pmsg->flags & I2C_M_RD) {
- DEB2(printk("Doing the last read\n"));
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
- }
- else if(!(pmsg->flags & I2C_M_RD)) {
- DEB2(printk("Doing the last write\n"));
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
- }
-
- return ret;
-}
-#endif
-
-
-/* Whenever we initiate a transaction, the first byte clocked
- * onto the bus after the start condition is the address (7 bit) of the
- * device we want to talk to. This function manipulates the address specified
- * so that it makes sense to the hardware when written to the IIC peripheral.
- *
- * Note: 10 bit addresses are not supported in this driver, although they are
- * supported by the hardware. This functionality needs to be implemented.
- */
-static inline int iic_doAddress(struct i2c_algo_iic_data *adap,
- struct i2c_msg *msg, int retries)
-{
- unsigned short flags = msg->flags;
- unsigned int addr;
- int ret;
-
-/* Ten bit addresses not supported right now */
- if ( (flags & I2C_M_TEN) ) {
-#if 0
- addr = 0xf0 | (( msg->addr >> 7) & 0x03);
- DEB2(printk("addr0: %d\n",addr));
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at extended address code.\n");
- return -EREMOTEIO;
- }
- iic_outw(adap,msg->addr & 0x7f);
- if (ret != 1) {
- printk("iic_doAddress: died at 2nd address code.\n");
- return -EREMOTEIO;
- }
- if ( flags & I2C_M_RD ) {
- i2c_repstart(adap);
- addr |= 0x01;
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at extended address code.\n");
- return -EREMOTEIO;
- }
- }
-#endif
- } else {
-
- addr = ( msg->addr << 1 );
-
-#if 0
- if (flags & I2C_M_RD )
- addr |= 1;
- if (flags & I2C_M_REV_DIR_ADDR )
- addr ^= 1;
-#endif
-
- if (iic_inw(adap, ITE_I2CSAR) != addr) {
- iic_outw(adap, ITE_I2CSAR, addr);
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at address code.\n");
- return -EREMOTEIO;
- }
- }
-
- }
-
- return 0;
-}
-
-
-/* Description: Prepares the controller for a transaction (clearing status
- * registers, data buffers, etc), and then calls either iic_readbytes or
- * iic_sendbytes to do the actual transaction.
- *
- * still to be done: Before we issue a transaction, we should
- * verify that the bus is not busy or in some unknown state.
- */
-static int iic_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- struct i2c_msg *pmsg;
- int i = 0;
- int ret, timeout;
-
- pmsg = &msgs[i];
-
- if(!pmsg->len) {
- DEB2(printk("iic_xfer: read/write length is 0\n");)
- return -EIO;
- }
- if(!(pmsg->flags & I2C_M_RD) && (!(pmsg->len)%2) ) {
- DEB2(printk("iic_xfer: write buffer length is not odd\n");)
- return -EIO;
- }
-
- /* Wait for any pending transfers to complete */
- timeout = wait_for_bb(adap);
- if (timeout) {
- DEB2(printk("iic_xfer: Timeout waiting for host not busy\n");)
- return -EIO;
- }
-
- /* Flush FIFO */
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
- /* Load address */
- ret = iic_doAddress(adap, pmsg, i2c_adap->retries);
- if (ret)
- return -EIO;
-
-#if 0
- /* Combined transaction (read and write) */
- if(num > 1) {
- DEB2(printk("iic_xfer: Call combined transaction\n"));
- ret = iic_combined_transaction(i2c_adap, msgs, num);
- }
-#endif
-
- DEB3(printk("iic_xfer: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
- i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
-
- if(pmsg->flags & I2C_M_RD) /* Read */
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, 0);
- else { /* Write */
- udelay(1000);
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len);
- }
-
- if (ret != pmsg->len)
- DEB3(printk("iic_xfer: error or fail on read/write %d bytes.\n",ret));
- else
- DEB3(printk("iic_xfer: read/write %d bytes.\n",ret));
-
- return ret;
-}
-
-
-/* Implements device specific ioctls. Higher level ioctls can
- * be found in i2c-core.c and are typical of any i2c controller (specifying
- * slave address, timeouts, etc). These ioctls take advantage of any hardware
- * features built into the controller for which this algorithm-adapter set
- * was written. These ioctls allow you to take control of the data and clock
- * lines and set the either high or low,
- * similar to a GPIO pin.
- */
-static int algo_control(struct i2c_adapter *adapter,
- unsigned int cmd, unsigned long arg)
-{
-
- struct i2c_algo_iic_data *adap = adapter->algo_data;
- struct i2c_iic_msg s_msg;
- char *buf;
- int ret;
-
- if (cmd == I2C_SREAD) {
- if(copy_from_user(&s_msg, (struct i2c_iic_msg *)arg,
- sizeof(struct i2c_iic_msg)))
- return -EFAULT;
- buf = kmalloc(s_msg.len, GFP_KERNEL);
- if (buf== NULL)
- return -ENOMEM;
-
- /* Flush FIFO */
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
- /* Load address */
- iic_outw(adap, ITE_I2CSAR,s_msg.addr<<1);
- iic_outw(adap, ITE_I2CSSAR,s_msg.waddr & 0xff);
-
- ret = iic_readbytes(adapter, buf, s_msg.len, 1);
- if (ret>=0) {
- if(copy_to_user( s_msg.buf, buf, s_msg.len) )
- ret = -EFAULT;
- }
- kfree(buf);
- }
- return 0;
-}
-
-
-static u32 iic_func(struct i2c_adapter *adap)
-{
- return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
- I2C_FUNC_PROTOCOL_MANGLING;
-}
-
-/* -----exported algorithm data: ------------------------------------- */
-
-static struct i2c_algorithm iic_algo = {
- .master_xfer = iic_xfer,
- .algo_control = algo_control, /* ioctl */
- .functionality = iic_func,
-};
-
-
-/*
- * registering functions to load algorithms at runtime
- */
-int i2c_iic_add_bus(struct i2c_adapter *adap)
-{
- struct i2c_algo_iic_data *iic_adap = adap->algo_data;
-
- if (iic_test) {
- int ret = test_bus(iic_adap, adap->name);
- if (ret<0)
- return -ENODEV;
- }
-
- DEB2(printk("i2c-algo-ite: hw routines for %s registered.\n",
- adap->name));
-
- /* register new adapter to i2c module... */
- adap->algo = &iic_algo;
-
- adap->timeout = 100; /* default values, should */
- adap->retries = 3; /* be replaced by defines */
- adap->flags = 0;
-
- iic_init(iic_adap);
- return i2c_add_adapter(adap);
-}
-
-
-int i2c_iic_del_bus(struct i2c_adapter *adap)
-{
- int res;
- if ((res = i2c_del_adapter(adap)) < 0)
- return res;
- DEB2(printk("i2c-algo-ite: adapter unregistered: %s\n",adap->name));
-
- return 0;
-}
-
-
-int __init i2c_algo_iic_init (void)
-{
- printk(KERN_INFO "ITE iic (i2c) algorithm module\n");
- return 0;
-}
-
-
-void i2c_algo_iic_exit(void)
-{
- return;
-}
-
-
-EXPORT_SYMBOL(i2c_iic_add_bus);
-EXPORT_SYMBOL(i2c_iic_del_bus);
-
-/* The MODULE_* macros resolve to nothing if MODULES is not defined
- * when this file is compiled.
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("ITE iic algorithm");
-MODULE_LICENSE("GPL");
-
-module_param(iic_test, bool, 0);
-module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
-
-MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
-MODULE_PARM_DESC(i2c_debug,
- "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
-
-
-/* This function resolves to init_module (the function invoked when a module
- * is loaded via insmod) when this file is compiled with MODULES defined.
- * Otherwise (i.e. if you want this driver statically linked to the kernel),
- * a pointer to this function is stored in a table and called
- * during the initialization of the kernel (in do_basic_setup in /init/main.c)
- *
- * All this functionality is complements of the macros defined in linux/init.h
- */
-module_init(i2c_algo_iic_init);
-
-
-/* If MODULES is defined when this file is compiled, then this function will
- * resolved to cleanup_module.
- */
-module_exit(i2c_algo_iic_exit);
diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h
deleted file mode 100644
index a8ca3c9..0000000
--- a/drivers/i2c/algos/i2c-algo-ite.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- --------------------------------------------------------------------
- i2c-ite.h: Global defines for the I2C controller on board the
- ITE MIPS processor.
- --------------------------------------------------------------------
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2001 MontaVista Software Inc.
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef I2C_ITE_H
-#define I2C_ITE_H 1
-
-#include <asm/it8172/it8172.h>
-
-/* I2C Registers */
-#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
-#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
-#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
-#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
-#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
-#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
-#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
-#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
-
-#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
-#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
-#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
-#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
-
-
-/* Host Control Register ITE_I2CHCR */
-#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */
-#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing
- the current transaction */
-#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */
-#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */
-#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */
-#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute
- the command and send the data programmed in
- all required registers to I2C bus */
-#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
-#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W
-#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R
-#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S
-
-/* Host Status Register ITE_I2CHSR */
-#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except
- in the first and last bytes */
-#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */
-#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */
-#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */
-#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */
-
-/* Slave Address Register ITE_I2CSAR */
-#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */
-#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the
- next slave address is addressed */
-
-/* Slave Sub-address Register ITE_I2CSSAR */
-#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */
-
-/* Clock Counter Register ITE_I2CCKCNT */
-#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */
-#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */
-#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */
-
-/* START Hold Time Register ITE_I2CSHDR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */
-#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */
-
-/* (Repeated) START Setup Time Register ITE_I2CRSUR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */
-#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */
-
-/* STOP setup Time Register ITE_I2CPSUR */
-
-/* FIFO Data Register ITE_I2CFDR */
-#define ITE_I2CFDR_MASK 0xff
-
-/* FIFO Byte Count Register ITE_I2CFBCR */
-#define ITE_I2CFBCR_MASK 0x3f
-
-/* FIFO Control Register ITE_I2CFCR */
-#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point
- and I2CFSR */
-/* FIFO Status Register ITE_I2CFSR */
-#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */
-#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */
-#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */
-#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */
-
-#endif /* I2C_ITE_H */
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 9081c9f..36fdf97 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -381,14 +381,7 @@
return rval;
}
-
-int i2c_pca_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_pca_add_bus);
-EXPORT_SYMBOL(i2c_pca_del_bus);
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
MODULE_DESCRIPTION("I2C-Bus PCA9564 algorithm");
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 3b20033..ecb2c2d 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -486,15 +486,7 @@
return rval;
}
-
-
-int i2c_pcf_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_pcf_add_bus);
-EXPORT_SYMBOL(i2c_pcf_del_bus);
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
MODULE_DESCRIPTION("I2C-Bus PCF8584 algorithm");
diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c
index 490d999..ac2d505 100644
--- a/drivers/i2c/algos/i2c-algo-sgi.c
+++ b/drivers/i2c/algos/i2c-algo-sgi.c
@@ -171,15 +171,7 @@
return i2c_add_adapter(adap);
}
-
-
-int i2c_sgi_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_sgi_add_bus);
-EXPORT_SYMBOL(i2c_sgi_del_bus);
MODULE_AUTHOR("Ladislav Michl <ladis@linux-mips.org>");
MODULE_DESCRIPTION("I2C-Bus SGI algorithm");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 90f91d0..e1989f3 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -74,6 +74,13 @@
This driver can also be built as a module. If so, the module
will be called i2c-amd8111.
+config I2C_AT91
+ tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
+ depends on I2C && ARCH_AT91 && EXPERIMENTAL
+ help
+ This supports the use of the I2C interface on Atmel AT91
+ processors.
+
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
depends on I2C && (SOC_AU1550 || SOC_AU1200)
@@ -209,18 +216,6 @@
tristate
depends on I2C
-config I2C_ITE
- tristate "ITE I2C Adapter"
- depends on I2C && MIPS_ITE8172
- select I2C_ALGOITE
- help
- This supports the ITE8172 I2C peripheral found on some MIPS
- systems. Say Y if you have one of these. You should also say Y for
- the ITE I2C driver algorithm support above.
-
- This support is also available as a module. If so, the module
- will be called i2c-ite.
-
config I2C_IXP4XX
tristate "IXP4xx GPIO-Based I2C Interface"
depends on I2C && ARCH_IXP4XX
@@ -481,6 +476,17 @@
If you don't know what to do here, definitely say N.
+config I2C_VERSATILE
+ tristate "ARM Versatile/Realview I2C bus support"
+ depends on I2C && (ARCH_VERSATILE || ARCH_REALVIEW)
+ select I2C_ALGOBIT
+ help
+ Say yes if you want to support the I2C serial bus on ARMs Versatile
+ range of platforms.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-versatile.
+
config I2C_VIA
tristate "VIA 82C586B"
depends on I2C && PCI && EXPERIMENTAL
@@ -548,4 +554,23 @@
This driver can also be built as a module. If so, the module
will be called i2c-mv64xxx.
+config I2C_PNX
+ tristate "I2C bus support for Philips PNX targets"
+ depends on ARCH_PNX4008 && I2C
+ help
+ This driver supports the Philips IP3204 I2C IP block master and/or
+ slave controller
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pnx.
+
+config I2C_PNX_EARLY
+ bool "Early initialization for I2C on PNXxxxx"
+ depends on I2C_PNX=y
+ help
+ Under certain circumstances one may need to make sure I2C on PNXxxxx
+ is initialized earlier than some other driver that depends on it
+ (for instance, that might be USB in case of PNX4008). With this
+ option turned on you can guarantee that.
+
endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 493c872..37196c1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
+obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
@@ -16,7 +17,6 @@
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_ISA) += i2c-isa.o
-obj-$(CONFIG_I2C_ITE) += i2c-ite.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
@@ -29,6 +29,7 @@
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o
@@ -39,6 +40,7 @@
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
+obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_VIA) += i2c-via.o
obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
new file mode 100644
index 0000000..67f91bd
--- /dev/null
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -0,0 +1,325 @@
+/*
+ i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+
+ Copyright (C) 2004 Rick Bronson
+ Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+
+ Borrowed heavily from original work by:
+ Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+*/
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/at91_twi.h>
+#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+
+#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
+
+
+static struct clk *twi_clk;
+static void __iomem *twi_base;
+
+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
+
+
+/*
+ * Initialize the TWI hardware registers.
+ */
+static void __devinit at91_twi_hwinit(void)
+{
+ unsigned long cdiv, ckdiv;
+
+ at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
+
+ /* Calcuate clock dividers */
+ cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
+ cdiv = cdiv + 1; /* round up */
+ ckdiv = 0;
+ while (cdiv > 255) {
+ ckdiv++;
+ cdiv = cdiv >> 1;
+ }
+
+ if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
+ if (ckdiv > 5) {
+ printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
+ ckdiv = 5;
+ }
+ }
+
+ at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
+}
+
+/*
+ * Poll the i2c status register until the specified bit is set.
+ * Returns 0 if timed out (100 msec).
+ */
+static short at91_poll_status(unsigned long bit)
+{
+ int loop_cntr = 10000;
+
+ do {
+ udelay(10);
+ } while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0));
+
+ return (loop_cntr > 0);
+}
+
+static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ /* Send Start */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START);
+
+ /* Read data */
+ while (length--) {
+ if (!length) /* need to send Stop before reading last byte */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP);
+ if (!at91_poll_status(AT91_TWI_RXRDY)) {
+ dev_dbg(&adap->dev, "RXRDY timeout\n");
+ return -ETIMEDOUT;
+ }
+ *buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff);
+ }
+
+ return 0;
+}
+
+static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ /* Load first byte into transmitter */
+ at91_twi_write(AT91_TWI_THR, *buf++);
+
+ /* Send Start */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START);
+
+ do {
+ if (!at91_poll_status(AT91_TWI_TXRDY)) {
+ dev_dbg(&adap->dev, "TXRDY timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ length--; /* byte was transmitted */
+
+ if (length > 0) /* more data to send? */
+ at91_twi_write(AT91_TWI_THR, *buf++);
+ } while (length);
+
+ /* Send Stop */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP);
+
+ return 0;
+}
+
+/*
+ * Generic i2c master transfer entrypoint.
+ *
+ * Note: We do not use Atmel's feature of storing the "internal device address".
+ * Instead the "internal device address" has to be written using a seperate
+ * i2c message.
+ * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html
+ */
+static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
+{
+ int i, ret;
+
+ dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
+
+ for (i = 0; i < num; i++) {
+ dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i,
+ pmsg->flags & I2C_M_RD ? "read" : "writ",
+ pmsg->len, pmsg->len > 1 ? "s" : "",
+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
+ at91_twi_write(AT91_TWI_MMR, (pmsg->addr << 16)
+ | ((pmsg->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0));
+
+ if (pmsg->len && pmsg->buf) { /* sanity check */
+ if (pmsg->flags & I2C_M_RD)
+ ret = xfer_read(adap, pmsg->buf, pmsg->len);
+ else
+ ret = xfer_write(adap, pmsg->buf, pmsg->len);
+
+ if (ret)
+ return ret;
+
+ /* Wait until transfer is finished */
+ if (!at91_poll_status(AT91_TWI_TXCOMP)) {
+ dev_dbg(&adap->dev, "TXCOMP timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+ dev_dbg(&adap->dev, "transfer complete\n");
+ pmsg++; /* next message */
+ }
+ return i;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 at91_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm at91_algorithm = {
+ .master_xfer = at91_xfer,
+ .functionality = at91_func,
+};
+
+/*
+ * Main initialization routine.
+ */
+static int __devinit at91_i2c_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter;
+ struct resource *res;
+ int rc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_i2c"))
+ return -EBUSY;
+
+ twi_base = ioremap(res->start, res->end - res->start + 1);
+ if (!twi_base) {
+ rc = -ENOMEM;
+ goto fail0;
+ }
+
+ twi_clk = clk_get(NULL, "twi_clk");
+ if (IS_ERR(twi_clk)) {
+ dev_err(&pdev->dev, "no clock defined\n");
+ rc = -ENODEV;
+ goto fail1;
+ }
+
+ adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (adapter == NULL) {
+ dev_err(&pdev->dev, "can't allocate inteface!\n");
+ rc = -ENOMEM;
+ goto fail2;
+ }
+ sprintf(adapter->name, "AT91");
+ adapter->algo = &at91_algorithm;
+ adapter->class = I2C_CLASS_HWMON;
+ adapter->dev.parent = &pdev->dev;
+
+ platform_set_drvdata(pdev, adapter);
+
+ clk_enable(twi_clk); /* enable peripheral clock */
+ at91_twi_hwinit(); /* initialize TWI controller */
+
+ rc = i2c_add_adapter(adapter);
+ if (rc) {
+ dev_err(&pdev->dev, "Adapter %s registration failed\n",
+ adapter->name);
+ goto fail3;
+ }
+
+ dev_info(&pdev->dev, "AT91 i2c bus driver.\n");
+ return 0;
+
+fail3:
+ platform_set_drvdata(pdev, NULL);
+ kfree(adapter);
+ clk_disable(twi_clk);
+fail2:
+ clk_put(twi_clk);
+fail1:
+ iounmap(twi_base);
+fail0:
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ return rc;
+}
+
+static int __devexit at91_i2c_remove(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+ struct resource *res;
+ int rc;
+
+ rc = i2c_del_adapter(adapter);
+ platform_set_drvdata(pdev, NULL);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iounmap(twi_base);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ clk_disable(twi_clk); /* disable peripheral clock */
+ clk_put(twi_clk);
+
+ return rc;
+}
+
+#ifdef CONFIG_PM
+
+/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */
+
+static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ clk_disable(twi_clk);
+ return 0;
+}
+
+static int at91_i2c_resume(struct platform_device *pdev)
+{
+ return clk_enable(twi_clk);
+}
+
+#else
+#define at91_i2c_suspend NULL
+#define at91_i2c_resume NULL
+#endif
+
+static struct platform_driver at91_i2c_driver = {
+ .probe = at91_i2c_probe,
+ .remove = __devexit_p(at91_i2c_remove),
+ .suspend = at91_i2c_suspend,
+ .resume = at91_i2c_resume,
+ .driver = {
+ .name = "at91_i2c",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init at91_i2c_init(void)
+{
+ return platform_driver_register(&at91_i2c_driver);
+}
+
+static void __exit at91_i2c_exit(void)
+{
+ platform_driver_unregister(&at91_i2c_driver);
+}
+
+module_init(at91_i2c_init);
+module_exit(at91_i2c_exit);
+
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index a591fe6..8349674 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -293,7 +293,7 @@
static void i2c_pcfisa_exit(void)
{
- i2c_pcf_del_bus(&pcf_isa_ops);
+ i2c_del_adapter(&pcf_isa_ops);
if (irq > 0) {
disable_irq(irq);
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 457d48a..9832f77 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -146,7 +146,7 @@
static void __devexit hydra_remove(struct pci_dev *dev)
{
pdregw(hydra_bit_data.data, 0); /* clear SCLK_OE and SDAT_OE */
- i2c_bit_del_bus(&hydra_adap);
+ i2c_del_adapter(&hydra_adap);
iounmap(hydra_bit_data.data);
release_mem_region(pci_resource_start(dev, 0)+
offsetof(struct Hydra, CachePD), 4);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index c7be2fd..ae625b8 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -470,12 +470,20 @@
int err;
I801_dev = dev;
- if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
+ switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_82801DB_3:
+ case PCI_DEVICE_ID_INTEL_82801EB_3:
+ case PCI_DEVICE_ID_INTEL_ESB_4:
+ case PCI_DEVICE_ID_INTEL_ICH6_16:
+ case PCI_DEVICE_ID_INTEL_ICH7_17:
+ case PCI_DEVICE_ID_INTEL_ESB2_17:
+ case PCI_DEVICE_ID_INTEL_ICH8_5:
+ case PCI_DEVICE_ID_INTEL_ICH9_6:
isich4 = 1;
- else
+ break;
+ default:
isich4 = 0;
+ }
err = pci_enable_device(dev);
if (err) {
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
index b66fb6b..10c98bc 100644
--- a/drivers/i2c/busses/i2c-i810.c
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -219,14 +219,14 @@
return retval;
retval = i2c_bit_add_bus(&i810_ddc_adapter);
if (retval)
- i2c_bit_del_bus(&i810_i2c_adapter);
+ i2c_del_adapter(&i810_i2c_adapter);
return retval;
}
static void __devexit i810_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&i810_ddc_adapter);
- i2c_bit_del_bus(&i810_i2c_adapter);
+ i2c_del_adapter(&i810_ddc_adapter);
+ i2c_del_adapter(&i810_i2c_adapter);
iounmap(ioaddr);
}
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 781a99c..1898e99 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -680,6 +680,12 @@
dev->idx = ocp->def->index;
ocp_set_drvdata(ocp, dev);
+ if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs),
+ "ibm_iic")) {
+ ret = -EBUSY;
+ goto fail1;
+ }
+
if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n",
dev->idx);
@@ -750,6 +756,8 @@
iounmap(dev->vaddr);
fail2:
+ release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
+fail1:
ocp_set_drvdata(ocp, NULL);
kfree(dev);
return ret;
@@ -777,6 +785,7 @@
free_irq(dev->irq, dev);
}
iounmap(dev->vaddr);
+ release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
kfree(dev);
}
}
diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
deleted file mode 100644
index f7d7186..0000000
--- a/drivers/i2c/busses/i2c-ite.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- -------------------------------------------------------------------------
- i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system
- -------------------------------------------------------------------------
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2001 MontaVista Software Inc.
-
- ----------------------------------------------------------------------------
- This file was highly leveraged from i2c-elektor.c, which was created
- by Simon G. Vogl and Hans Berglund:
-
-
- Copyright (C) 1995-97 Simon G. Vogl
- 1998-99 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
- Frodo Looijaard <frodol@dds.nl> */
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include <linux/i2c-adap-ite.h>
-#include "../i2c-ite.h"
-
-#define DEFAULT_BASE 0x14014030
-#define ITE_IIC_IO_SIZE 0x40
-#define DEFAULT_IRQ 0
-#define DEFAULT_CLOCK 0x1b0e /* default 16MHz/(27+14) = 400KHz */
-#define DEFAULT_OWN 0x55
-
-static int base;
-static int irq;
-static int clock;
-static int own;
-
-static struct iic_ite gpi;
-static wait_queue_head_t iic_wait;
-static int iic_pending;
-static spinlock_t lock;
-
-/* ----- local functions ---------------------------------------------- */
-
-static void iic_ite_setiic(void *data, int ctl, short val)
-{
- unsigned long j = jiffies + 10;
-
- pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff);
-#ifdef DEBUG
- while (time_before(jiffies, j))
- schedule();
-#endif
- outw(val,ctl);
-}
-
-static short iic_ite_getiic(void *data, int ctl)
-{
- short val;
-
- val = inw(ctl);
- pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff);
- return (val);
-}
-
-/* Return our slave address. This is the address
- * put on the I2C bus when another master on the bus wants to address us
- * as a slave
- */
-static int iic_ite_getown(void *data)
-{
- return (gpi.iic_own);
-}
-
-
-static int iic_ite_getclock(void *data)
-{
- return (gpi.iic_clock);
-}
-
-
-/* Put this process to sleep. We will wake up when the
- * IIC controller interrupts.
- */
-static void iic_ite_waitforpin(void) {
- DEFINE_WAIT(wait);
- int timeout = 2;
- unsigned long flags;
-
- /* If interrupts are enabled (which they are), then put the process to
- * sleep. This process will be awakened by two events -- either the
- * the IIC peripheral interrupts or the timeout expires.
- * If interrupts are not enabled then delay for a reasonable amount
- * of time and return.
- */
- if (gpi.iic_irq > 0) {
- spin_lock_irqsave(&lock, flags);
- if (iic_pending == 0) {
- spin_unlock_irqrestore(&lock, flags);
- prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE);
- if (schedule_timeout(timeout*HZ)) {
- spin_lock_irqsave(&lock, flags);
- if (iic_pending == 1) {
- iic_pending = 0;
- }
- spin_unlock_irqrestore(&lock, flags);
- }
- finish_wait(&iic_wait, &wait);
- } else {
- iic_pending = 0;
- spin_unlock_irqrestore(&lock, flags);
- }
- } else {
- udelay(100);
- }
-}
-
-
-static irqreturn_t iic_ite_handler(int this_irq, void *dev_id)
-{
- spin_lock(&lock);
- iic_pending = 1;
- spin_unlock(&lock);
-
- wake_up_interruptible(&iic_wait);
-
- return IRQ_HANDLED;
-}
-
-
-/* Lock the region of memory where I/O registers exist. Request our
- * interrupt line and register its associated handler.
- */
-static int iic_hw_resrc_init(void)
-{
- if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c"))
- return -ENODEV;
-
- if (gpi.iic_irq <= 0)
- return 0;
-
- if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0)
- gpi.iic_irq = 0;
- else
- enable_irq(gpi.iic_irq);
-
- return 0;
-}
-
-
-static void iic_ite_release(void)
-{
- if (gpi.iic_irq > 0) {
- disable_irq(gpi.iic_irq);
- free_irq(gpi.iic_irq, 0);
- }
- release_region(gpi.iic_base , 2);
-}
-
-/* ------------------------------------------------------------------------
- * Encapsulate the above functions in the correct operations structure.
- * This is only done when more than one hardware adapter is supported.
- */
-static struct i2c_algo_iic_data iic_ite_data = {
- NULL,
- iic_ite_setiic,
- iic_ite_getiic,
- iic_ite_getown,
- iic_ite_getclock,
- iic_ite_waitforpin,
- 80, 80, 100, /* waits, timeout */
-};
-
-static struct i2c_adapter iic_ite_ops = {
- .owner = THIS_MODULE,
- .id = I2C_HW_I_IIC,
- .algo_data = &iic_ite_data,
- .name = "ITE IIC adapter",
-};
-
-/* Called when the module is loaded. This function starts the
- * cascade of calls up through the hierarchy of i2c modules (i.e. up to the
- * algorithm layer and into to the core layer)
- */
-static int __init iic_ite_init(void)
-{
-
- struct iic_ite *piic = &gpi;
-
- printk(KERN_INFO "Initialize ITE IIC adapter module\n");
- if (base == 0)
- piic->iic_base = DEFAULT_BASE;
- else
- piic->iic_base = base;
-
- if (irq == 0)
- piic->iic_irq = DEFAULT_IRQ;
- else
- piic->iic_irq = irq;
-
- if (clock == 0)
- piic->iic_clock = DEFAULT_CLOCK;
- else
- piic->iic_clock = clock;
-
- if (own == 0)
- piic->iic_own = DEFAULT_OWN;
- else
- piic->iic_own = own;
-
- iic_ite_data.data = (void *)piic;
- init_waitqueue_head(&iic_wait);
- spin_lock_init(&lock);
- if (iic_hw_resrc_init() == 0) {
- if (i2c_iic_add_bus(&iic_ite_ops) < 0)
- return -ENODEV;
- } else {
- return -ENODEV;
- }
- printk(KERN_INFO " found device at %#x irq %d.\n",
- piic->iic_base, piic->iic_irq);
- return 0;
-}
-
-
-static void iic_ite_exit(void)
-{
- i2c_iic_del_bus(&iic_ite_ops);
- iic_ite_release();
-}
-
-/* If modules is NOT defined when this file is compiled, then the MODULE_*
- * macros will resolve to nothing
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter");
-MODULE_LICENSE("GPL");
-
-module_param(base, int, 0);
-module_param(irq, int, 0);
-module_param(clock, int, 0);
-module_param(own, int, 0);
-
-
-/* Called when module is loaded or when kernel is initialized.
- * If MODULES is defined when this file is compiled, then this function will
- * resolve to init_module (the function called when insmod is invoked for a
- * module). Otherwise, this function is called early in the boot, when the
- * kernel is intialized. Check out /include/init.h to see how this works.
- */
-module_init(iic_ite_init);
-
-/* Resolves to module_cleanup when MODULES is defined. */
-module_exit(iic_ite_exit);
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index dd3f4cd..efa3ecc 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -90,7 +90,7 @@
platform_set_drvdata(plat_dev, NULL);
- i2c_bit_del_bus(&drv_data->adapter);
+ i2c_del_adapter(&drv_data->adapter);
kfree(drv_data);
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index 68fe863..08e89b8 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -91,7 +91,7 @@
platform_set_drvdata(plat_dev, NULL);
- i2c_bit_del_bus(&drv_data->adapter);
+ i2c_del_adapter(&drv_data->adapter);
kfree(drv_data);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index e0292e4..ad37c10 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -35,7 +35,7 @@
nForce4 MCP55 0368
This driver supports the 2 SMBuses that are included in the MCP of the
- nForce2/3/4 chipsets.
+ nForce2/3/4/5xx chipsets.
*/
/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
@@ -52,8 +52,8 @@
#include <asm/io.h>
MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");
-MODULE_DESCRIPTION("nForce2 SMBus driver");
+MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@gmx.net>");
+MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver");
struct nforce2_smbus {
@@ -80,9 +80,6 @@
#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */
#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */
#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */
-#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */
-#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */
-#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */
#define NVIDIA_SMB_STS_DONE 0x80
#define NVIDIA_SMB_STS_ALRM 0x40
@@ -95,40 +92,17 @@
#define NVIDIA_SMB_PRTCL_BYTE 0x04
#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06
#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08
-#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a
-#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c
-#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d
-#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
#define NVIDIA_SMB_PRTCL_PEC 0x80
static struct pci_driver nforce2_driver;
-static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data *data);
-static u32 nforce2_func(struct i2c_adapter *adapter);
-
-
-static const struct i2c_algorithm smbus_algorithm = {
- .smbus_xfer = nforce2_access,
- .functionality = nforce2_func,
-};
-
-static struct i2c_adapter nforce2_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
- .algo = &smbus_algorithm,
-};
-
-/* Return -1 on error. See smbus.h for more information */
+/* Return -1 on error */
static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data)
{
struct nforce2_smbus *smbus = adap->algo_data;
unsigned char protocol, pec, temp;
- unsigned char len = 0; /* to keep the compiler quiet */
- int i;
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
NVIDIA_SMB_PRTCL_WRITE;
@@ -163,35 +137,6 @@
protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
break;
- case I2C_SMBUS_BLOCK_DATA:
- outb_p(command, NVIDIA_SMB_CMD);
- if (read_write == I2C_SMBUS_WRITE) {
- len = min_t(u8, data->block[0], 32);
- outb_p(len, NVIDIA_SMB_BCNT);
- for (i = 0; i < len; i++)
- outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
- }
- protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
- break;
-
- case I2C_SMBUS_I2C_BLOCK_DATA:
- len = min_t(u8, data->block[0], 32);
- outb_p(command, NVIDIA_SMB_CMD);
- outb_p(len, NVIDIA_SMB_BCNT);
- if (read_write == I2C_SMBUS_WRITE)
- for (i = 0; i < len; i++)
- outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
- protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA;
- break;
-
- case I2C_SMBUS_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
-
- case I2C_SMBUS_BLOCK_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
- return -1;
-
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -227,19 +172,8 @@
break;
case I2C_SMBUS_WORD_DATA:
- /* case I2C_SMBUS_PROC_CALL: not supported */
data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
break;
-
- case I2C_SMBUS_BLOCK_DATA:
- /* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */
- len = inb_p(NVIDIA_SMB_BCNT);
- len = min_t(u8, len, 32);
- case I2C_SMBUS_I2C_BLOCK_DATA:
- for (i = 0; i < len; i++)
- data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
- data->block[0] = len;
- break;
}
return 0;
@@ -250,10 +184,14 @@
{
/* other functionality might be possible, but is not tested */
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* |
- I2C_FUNC_SMBUS_BLOCK_DATA */;
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
}
+static struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = nforce2_access,
+ .functionality = nforce2_func,
+};
+
static struct pci_device_id nforce2_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
@@ -267,7 +205,6 @@
{ 0 }
};
-
MODULE_DEVICE_TABLE (pci, nforce2_ids);
@@ -291,7 +228,7 @@
}
smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
- smbus->size = 8;
+ smbus->size = 64;
}
smbus->dev = dev;
@@ -300,7 +237,9 @@
smbus->base, smbus->base+smbus->size-1, name);
return -1;
}
- smbus->adapter = nforce2_adapter;
+ smbus->adapter.owner = THIS_MODULE;
+ smbus->adapter.class = I2C_CLASS_HWMON;
+ smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
smbus->adapter.dev.parent = &dev->dev;
snprintf(smbus->adapter.name, I2C_NAME_SIZE,
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index dec04da..bcd8367 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -231,8 +231,8 @@
* 13 2 1
* 19.2 2 1
*/
- if (fclk_rate > 16000000)
- psc = (fclk_rate + 8000000) / 12000000;
+ if (fclk_rate > 12000000)
+ psc = fclk_rate / 12000000;
}
/* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index 5eb2bd2..4bc4281 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -163,7 +163,7 @@
if (adapter_parm[type].init.val)
line_set(0, &adapter_parm[type].init);
- i2c_bit_del_bus(&parport_adapter);
+ i2c_del_adapter(&parport_adapter);
release_region(base, 3);
}
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 48a8294..66696a4 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -218,7 +218,7 @@
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
- i2c_bit_del_bus(&adapter->adapter);
+ i2c_del_adapter(&adapter->adapter);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 407840b..cc6536a 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -156,7 +156,7 @@
static void pca_isa_exit(void)
{
- i2c_pca_del_bus(&pca_isa_ops);
+ i2c_del_adapter(&pca_isa_ops);
if (irq > 0) {
disable_irq(irq);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
new file mode 100644
index 0000000..de0bca7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -0,0 +1,708 @@
+/*
+ * Provides I2C support for Philips PNX010x/PNX4008 boards.
+ *
+ * Authors: Dennis Kovalev <dkovalev@ru.mvista.com>
+ * Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-pnx.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define I2C_PNX_TIMEOUT 10 /* msec */
+#define I2C_PNX_SPEED_KHZ 100
+#define I2C_PNX_REGION_SIZE 0x100
+#define PNX_DEFAULT_FREQ 13 /* MHz */
+
+static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
+{
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_STS(data)) & mstatus_active)) {
+ mdelay(1);
+ timeout--;
+ }
+ return (timeout <= 0);
+}
+
+static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
+{
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
+ mdelay(1);
+ timeout--;
+ }
+ return (timeout <= 0);
+}
+
+static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *data = adap->algo_data;
+ struct timer_list *timer = &data->mif.timer;
+ int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
+
+ del_timer_sync(timer);
+
+ dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
+ jiffies, expires);
+
+ timer->expires = jiffies + expires;
+ timer->data = (unsigned long)adap;
+
+ add_timer(timer);
+}
+
+/**
+ * i2c_pnx_start - start a device
+ * @slave_addr: slave address
+ * @adap: pointer to adapter structure
+ *
+ * Generate a START signal in the desired mode.
+ */
+static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __FUNCTION__,
+ slave_addr, alg_data->mif.mode);
+
+ /* Check for 7 bit slave addresses only */
+ if (slave_addr & ~0x7f) {
+ dev_err(&adap->dev, "%s: Invalid slave address %x. "
+ "Only 7-bit addresses are supported\n",
+ adap->name, slave_addr);
+ return -EINVAL;
+ }
+
+ /* First, make sure bus is idle */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
+ /* Somebody else is monopolizing the bus */
+ dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, "
+ "cntrl = %x, stat = %x\n",
+ adap->name, slave_addr,
+ ioread32(I2C_REG_CTL(alg_data)),
+ ioread32(I2C_REG_STS(alg_data)));
+ return -EBUSY;
+ } else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
+ /* Sorry, we lost the bus */
+ dev_err(&adap->dev, "%s: Arbitration failure. "
+ "Slave addr = %02x\n", adap->name, slave_addr);
+ return -EIO;
+ }
+
+ /*
+ * OK, I2C is enabled and we have the bus.
+ * Clear the current TDI and AFI status flags.
+ */
+ iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
+ I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): sending %#x\n", __FUNCTION__,
+ (slave_addr << 1) | start_bit | alg_data->mif.mode);
+
+ /* Write the slave address, START bit and R/W bit */
+ iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
+ I2C_REG_TX(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): exit\n", __FUNCTION__);
+
+ return 0;
+}
+
+/**
+ * i2c_pnx_stop - stop a device
+ * @adap: pointer to I2C adapter structure
+ *
+ * Generate a STOP signal to terminate the master transaction.
+ */
+static void i2c_pnx_stop(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ /* Only 1 msec max timeout due to interrupt context */
+ long timeout = 1000;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ /* Write a STOP bit to TX FIFO */
+ iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data));
+
+ /* Wait until the STOP is seen. */
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) {
+ /* may be called from interrupt context */
+ udelay(1);
+ timeout--;
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+}
+
+/**
+ * i2c_pnx_master_xmit - transmit data to slave
+ * @adap: pointer to I2C adapter structure
+ *
+ * Sends one byte of data to the slave
+ */
+static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 val;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ if (alg_data->mif.len > 0) {
+ /* We still have something to talk about... */
+ val = *alg_data->mif.buf++;
+
+ if (alg_data->mif.len == 1) {
+ val |= stop_bit;
+ if (!alg_data->last)
+ val |= start_bit;
+ }
+
+ alg_data->mif.len--;
+ iowrite32(val, I2C_REG_TX(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __FUNCTION__,
+ val, alg_data->mif.len + 1);
+
+ if (alg_data->mif.len == 0) {
+ if (alg_data->last) {
+ /* Wait until the STOP is seen. */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+ dev_err(&adap->dev, "The bus is still "
+ "active after timeout\n");
+ }
+ /* Disable master interrupts */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+ ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+ I2C_REG_CTL(alg_data));
+
+ del_timer_sync(&alg_data->mif.timer);
+
+ dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
+ __FUNCTION__);
+
+ complete(&alg_data->mif.complete);
+ }
+ } else if (alg_data->mif.len == 0) {
+ /* zero-sized transfer */
+ i2c_pnx_stop(adap);
+
+ /* Disable master interrupts. */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+ ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+ I2C_REG_CTL(alg_data));
+
+ /* Stop timer. */
+ del_timer_sync(&alg_data->mif.timer);
+ dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
+ "zero-xfer.\n", __FUNCTION__);
+
+ complete(&alg_data->mif.complete);
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ return 0;
+}
+
+/**
+ * i2c_pnx_master_rcv - receive data from slave
+ * @adap: pointer to I2C adapter structure
+ *
+ * Reads one byte data from the slave
+ */
+static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ unsigned int val = 0;
+ u32 ctl = 0;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ /* Check, whether there is already data,
+ * or we didn't 'ask' for it yet.
+ */
+ if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
+ dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
+ "Rx-fifo...\n", __FUNCTION__);
+
+ if (alg_data->mif.len == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+ if (!alg_data->last)
+ val |= start_bit;
+
+ /*
+ * Enable interrupt RFDAIE (data in Rx fifo),
+ * and disable DRMIE (need data for Tx)
+ */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl |= mcntrl_rffie | mcntrl_daie;
+ ctl &= ~mcntrl_drmie;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ }
+
+ /*
+ * Now we'll 'ask' for data:
+ * For each byte we want to receive, we must
+ * write a (dummy) byte to the Tx-FIFO.
+ */
+ iowrite32(val, I2C_REG_TX(alg_data));
+
+ return 0;
+ }
+
+ /* Handle data. */
+ if (alg_data->mif.len > 0) {
+ val = ioread32(I2C_REG_RX(alg_data));
+ *alg_data->mif.buf++ = (u8) (val & 0xff);
+ dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __FUNCTION__, val,
+ alg_data->mif.len);
+
+ alg_data->mif.len--;
+ if (alg_data->mif.len == 0) {
+ if (alg_data->last)
+ /* Wait until the STOP is seen. */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+ dev_err(&adap->dev, "The bus is still "
+ "active after timeout\n");
+
+ /* Disable master interrupts */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie | mcntrl_daie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Kill timer. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ }
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ return 0;
+}
+
+static irqreturn_t
+i2c_pnx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ u32 stat, ctl;
+ struct i2c_adapter *adap = dev_id;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
+ __FUNCTION__,
+ ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)),
+ alg_data->mif.mode);
+ stat = ioread32(I2C_REG_STS(alg_data));
+
+ /* let's see what kind of event this is */
+ if (stat & mstatus_afi) {
+ /* We lost arbitration in the midst of a transfer */
+ alg_data->mif.ret = -EIO;
+
+ /* Disable master interrupts. */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Stop timer, to prevent timeout. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ } else if (stat & mstatus_nai) {
+ /* Slave did not acknowledge, generate a STOP */
+ dev_dbg(&adap->dev, "%s(): "
+ "Slave did not acknowledge, generating a STOP.\n",
+ __FUNCTION__);
+ i2c_pnx_stop(adap);
+
+ /* Disable master interrupts. */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Our return value. */
+ alg_data->mif.ret = -EIO;
+
+ /* Stop timer, to prevent timeout. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ } else {
+ /*
+ * Two options:
+ * - Master Tx needs data.
+ * - There is data in the Rx-fifo
+ * The latter is only the case if we have requested for data,
+ * via a dummy write. (See 'i2c_pnx_master_rcv'.)
+ * We therefore check, as a sanity check, whether that interrupt
+ * has been enabled.
+ */
+ if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
+ if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
+ i2c_pnx_master_xmit(adap);
+ } else if (alg_data->mif.mode == I2C_SMBUS_READ) {
+ i2c_pnx_master_rcv(adap);
+ }
+ }
+ }
+
+ /* Clear TDI and AFI bits */
+ stat = ioread32(I2C_REG_STS(alg_data));
+ iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)));
+
+ return IRQ_HANDLED;
+}
+
+static void i2c_pnx_timeout(unsigned long data)
+{
+ struct i2c_adapter *adap = (struct i2c_adapter *)data;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 ctl;
+
+ dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. "
+ "Resetting master...\n",
+ ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)));
+
+ /* Reset master and disable interrupts */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ ctl |= mcntrl_reset;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ alg_data->mif.ret = -EIO;
+ complete(&alg_data->mif.complete);
+}
+
+static inline void bus_reset_if_active(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 stat;
+
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
+ dev_err(&adap->dev,
+ "%s: Bus is still active after xfer. Reset it...\n",
+ adap->name);
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ } else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
+ /* If there is data in the fifo's after transfer,
+ * flush fifo's by reset.
+ */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ } else if (stat & mstatus_nai) {
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ }
+}
+
+/**
+ * i2c_pnx_xfer - generic transfer entry point
+ * @adap: pointer to I2C adapter structure
+ * @msgs: array of messages
+ * @num: number of messages
+ *
+ * Initiates the transfer
+ */
+static int
+i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct i2c_msg *pmsg;
+ int rc = 0, completed = 0, i;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 stat = ioread32(I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
+ __FUNCTION__, num, ioread32(I2C_REG_STS(alg_data)));
+
+ bus_reset_if_active(adap);
+
+ /* Process transactions in a loop. */
+ for (i = 0; rc >= 0 && i < num; i++) {
+ u8 addr;
+
+ pmsg = &msgs[i];
+ addr = pmsg->addr;
+
+ if (pmsg->flags & I2C_M_TEN) {
+ dev_err(&adap->dev,
+ "%s: 10 bits addr not supported!\n",
+ adap->name);
+ rc = -EINVAL;
+ break;
+ }
+
+ alg_data->mif.buf = pmsg->buf;
+ alg_data->mif.len = pmsg->len;
+ alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
+ I2C_SMBUS_READ : I2C_SMBUS_WRITE;
+ alg_data->mif.ret = 0;
+ alg_data->last = (i == num - 1);
+
+ dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __FUNCTION__,
+ alg_data->mif.mode,
+ alg_data->mif.len);
+
+ i2c_pnx_arm_timer(adap);
+
+ /* initialize the completion var */
+ init_completion(&alg_data->mif.complete);
+
+ /* Enable master interrupt */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie |
+ mcntrl_naie | mcntrl_drmie,
+ I2C_REG_CTL(alg_data));
+
+ /* Put start-code and slave-address on the bus. */
+ rc = i2c_pnx_start(addr, adap);
+ if (rc < 0)
+ break;
+
+ /* Wait for completion */
+ wait_for_completion(&alg_data->mif.complete);
+
+ if (!(rc = alg_data->mif.ret))
+ completed++;
+ dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
+ __FUNCTION__, rc);
+
+ /* Clear TDI and AFI bits in case they are set. */
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
+ dev_dbg(&adap->dev,
+ "%s: TDI still set... clearing now.\n",
+ adap->name);
+ iowrite32(stat, I2C_REG_STS(alg_data));
+ }
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
+ dev_dbg(&adap->dev,
+ "%s: AFI still set... clearing now.\n",
+ adap->name);
+ iowrite32(stat, I2C_REG_STS(alg_data));
+ }
+ }
+
+ bus_reset_if_active(adap);
+
+ /* Cleanup to be sure... */
+ alg_data->mif.buf = NULL;
+ alg_data->mif.len = 0;
+
+ dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ if (completed != num)
+ return ((rc < 0) ? rc : -EREMOTEIO);
+
+ return num;
+}
+
+static u32 i2c_pnx_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm pnx_algorithm = {
+ .master_xfer = i2c_pnx_xfer,
+ .functionality = i2c_pnx_func,
+};
+
+static int i2c_pnx_controller_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ return i2c_pnx->suspend(pdev, state);
+}
+
+static int i2c_pnx_controller_resume(struct platform_device *pdev)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ return i2c_pnx->resume(pdev);
+}
+
+static int __devinit i2c_pnx_probe(struct platform_device *pdev)
+{
+ unsigned long tmp;
+ int ret = 0;
+ struct i2c_pnx_algo_data *alg_data;
+ int freq_mhz;
+ struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
+
+ if (!i2c_pnx || !i2c_pnx->adapter) {
+ dev_err(&pdev->dev, "%s: no platform data supplied\n",
+ __FUNCTION__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ platform_set_drvdata(pdev, i2c_pnx);
+
+ if (i2c_pnx->calculate_input_freq)
+ freq_mhz = i2c_pnx->calculate_input_freq(pdev);
+ else {
+ freq_mhz = PNX_DEFAULT_FREQ;
+ dev_info(&pdev->dev, "Setting bus frequency to default value: "
+ "%d MHz", freq_mhz);
+ }
+
+ i2c_pnx->adapter->algo = &pnx_algorithm;
+
+ alg_data = i2c_pnx->adapter->algo_data;
+ init_timer(&alg_data->mif.timer);
+ alg_data->mif.timer.function = i2c_pnx_timeout;
+ alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
+
+ /* Register I/O resource */
+ if (!request_region(alg_data->base, I2C_PNX_REGION_SIZE, pdev->name)) {
+ dev_err(&pdev->dev,
+ "I/O region 0x%08x for I2C already in use.\n",
+ alg_data->base);
+ ret = -ENODEV;
+ goto out_drvdata;
+ }
+
+ if (!(alg_data->ioaddr =
+ (u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) {
+ dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
+ ret = -ENOMEM;
+ goto out_release;
+ }
+
+ i2c_pnx->set_clock_run(pdev);
+
+ /*
+ * Clock Divisor High This value is the number of system clocks
+ * the serial clock (SCL) will be high.
+ * For example, if the system clock period is 50 ns and the maximum
+ * desired serial period is 10000 ns (100 kHz), then CLKHI would be
+ * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value
+ * programmed into CLKHI will vary from this slightly due to
+ * variations in the output pad's rise and fall times as well as
+ * the deglitching filter length.
+ */
+
+ tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+ iowrite32(tmp, I2C_REG_CKH(alg_data));
+ iowrite32(tmp, I2C_REG_CKL(alg_data));
+
+ iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
+ if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
+ ret = -ENODEV;
+ goto out_unmap;
+ }
+ init_completion(&alg_data->mif.complete);
+
+ ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
+ 0, pdev->name, i2c_pnx->adapter);
+ if (ret)
+ goto out_clock;
+
+ /* Register this adapter with the I2C subsystem */
+ i2c_pnx->adapter->dev.parent = &pdev->dev;
+ ret = i2c_add_adapter(i2c_pnx->adapter);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "I2C: Failed to add bus\n");
+ goto out_irq;
+ }
+
+ dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
+ i2c_pnx->adapter->name, alg_data->base, alg_data->irq);
+
+ return 0;
+
+out_irq:
+ free_irq(alg_data->irq, alg_data);
+out_clock:
+ i2c_pnx->set_clock_stop(pdev);
+out_unmap:
+ iounmap((void *)alg_data->ioaddr);
+out_release:
+ release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+out_drvdata:
+ platform_set_drvdata(pdev, NULL);
+out:
+ return ret;
+}
+
+static int __devexit i2c_pnx_remove(struct platform_device *pdev)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ struct i2c_adapter *adap = i2c_pnx->adapter;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ free_irq(alg_data->irq, alg_data);
+ i2c_del_adapter(adap);
+ i2c_pnx->set_clock_stop(pdev);
+ iounmap((void *)alg_data->ioaddr);
+ release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver i2c_pnx_driver = {
+ .driver = {
+ .name = "pnx-i2c",
+ .owner = THIS_MODULE,
+ },
+ .probe = i2c_pnx_probe,
+ .remove = __devexit_p(i2c_pnx_remove),
+ .suspend = i2c_pnx_controller_suspend,
+ .resume = i2c_pnx_controller_resume,
+};
+
+static int __init i2c_adap_pnx_init(void)
+{
+ return platform_driver_register(&i2c_pnx_driver);
+}
+
+static void __exit i2c_adap_pnx_exit(void)
+{
+ platform_driver_unregister(&i2c_pnx_driver);
+}
+
+MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
+MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_I2C_PNX_EARLY
+/* We need to make sure I2C is initialized before USB */
+subsys_initcall(i2c_adap_pnx_init);
+#else
+mudule_init(i2c_adap_pnx_init);
+#endif
+module_exit(i2c_adap_pnx_exit);
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
index 7745e21..07c1f1e 100644
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ b/drivers/i2c/busses/i2c-prosavage.c
@@ -212,7 +212,7 @@
if (chip->i2c_bus[i].adap_ok == 0)
continue;
- ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
+ ret = i2c_del_adapter(&chip->i2c_bus[i].adap);
if (ret) {
dev_err(&dev->dev, "%s not removed\n",
chip->i2c_bus[i].adap.name);
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
index 209f47e..844b4ff 100644
--- a/drivers/i2c/busses/i2c-savage4.c
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -173,7 +173,7 @@
static void __devexit savage4_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&savage4_i2c_adapter);
+ i2c_del_adapter(&savage4_i2c_adapter);
iounmap(ioaddr);
}
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
new file mode 100644
index 0000000..081d957
--- /dev/null
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -0,0 +1,153 @@
+/*
+ * i2c-versatile.c
+ *
+ * Copyright (C) 2006 ARM Ltd.
+ * written by Russell King, Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#define I2C_CONTROL 0x00
+#define I2C_CONTROLS 0x00
+#define I2C_CONTROLC 0x04
+#define SCL (1 << 0)
+#define SDA (1 << 1)
+
+struct i2c_versatile {
+ struct i2c_adapter adap;
+ struct i2c_algo_bit_data algo;
+ void __iomem *base;
+};
+
+static void i2c_versatile_setsda(void *data, int state)
+{
+ struct i2c_versatile *i2c = data;
+
+ writel(SDA, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC));
+}
+
+static void i2c_versatile_setscl(void *data, int state)
+{
+ struct i2c_versatile *i2c = data;
+
+ writel(SCL, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC));
+}
+
+static int i2c_versatile_getsda(void *data)
+{
+ struct i2c_versatile *i2c = data;
+ return !!(readl(i2c->base + I2C_CONTROL) & SDA);
+}
+
+static int i2c_versatile_getscl(void *data)
+{
+ struct i2c_versatile *i2c = data;
+ return !!(readl(i2c->base + I2C_CONTROL) & SCL);
+}
+
+static struct i2c_algo_bit_data i2c_versatile_algo = {
+ .setsda = i2c_versatile_setsda,
+ .setscl = i2c_versatile_setscl,
+ .getsda = i2c_versatile_getsda,
+ .getscl = i2c_versatile_getscl,
+ .udelay = 30,
+ .timeout = HZ,
+};
+
+static int i2c_versatile_probe(struct platform_device *dev)
+{
+ struct i2c_versatile *i2c;
+ struct resource *r;
+ int ret;
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!r) {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ if (!request_mem_region(r->start, r->end - r->start + 1, "versatile-i2c")) {
+ ret = -EBUSY;
+ goto err_out;
+ }
+
+ i2c = kzalloc(sizeof(struct i2c_versatile), GFP_KERNEL);
+ if (!i2c) {
+ ret = -ENOMEM;
+ goto err_release;
+ }
+
+ i2c->base = ioremap(r->start, r->end - r->start + 1);
+ if (!i2c->base) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ writel(SCL | SDA, i2c->base + I2C_CONTROLS);
+
+ i2c->adap.owner = THIS_MODULE;
+ strlcpy(i2c->adap.name, "Versatile I2C adapter", sizeof(i2c->adap.name));
+ i2c->adap.algo_data = &i2c->algo;
+ i2c->adap.dev.parent = &dev->dev;
+ i2c->algo = i2c_versatile_algo;
+ i2c->algo.data = i2c;
+
+ ret = i2c_bit_add_bus(&i2c->adap);
+ if (ret >= 0) {
+ platform_set_drvdata(dev, i2c);
+ return 0;
+ }
+
+ iounmap(i2c->base);
+ err_free:
+ kfree(i2c);
+ err_release:
+ release_mem_region(r->start, r->end - r->start + 1);
+ err_out:
+ return ret;
+}
+
+static int i2c_versatile_remove(struct platform_device *dev)
+{
+ struct i2c_versatile *i2c = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ i2c_del_adapter(&i2c->adap);
+ return 0;
+}
+
+static struct platform_driver i2c_versatile_driver = {
+ .probe = i2c_versatile_probe,
+ .remove = i2c_versatile_remove,
+ .driver = {
+ .name = "versatile-i2c",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init i2c_versatile_init(void)
+{
+ return platform_driver_register(&i2c_versatile_driver);
+}
+
+static void __exit i2c_versatile_exit(void)
+{
+ platform_driver_unregister(&i2c_versatile_driver);
+}
+
+module_init(i2c_versatile_init);
+module_exit(i2c_versatile_exit);
+
+MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 910e200..15d7e00 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -151,7 +151,7 @@
static void __devexit vt586b_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&vt586b_adapter);
+ i2c_del_adapter(&vt586b_adapter);
release_region(I2C_DIR, IOSPACE);
pm_io_base = 0;
}
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 6c8d251..b0377b8 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -211,14 +211,14 @@
return retval;
retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
if (retval)
- i2c_bit_del_bus(&voodoo3_i2c_adapter);
+ i2c_del_adapter(&voodoo3_i2c_adapter);
return retval;
}
static void __devexit voodoo3_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&voodoo3_i2c_adapter);
- i2c_bit_del_bus(&voodoo3_ddc_adapter);
+ i2c_del_adapter(&voodoo3_i2c_adapter);
+ i2c_del_adapter(&voodoo3_ddc_adapter);
iounmap(ioaddr);
}
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index 8ddbae4..6cd96e4 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -116,7 +116,7 @@
static void scx200_i2c_cleanup(void)
{
- i2c_bit_del_bus(&scx200_i2c_ops);
+ i2c_del_adapter(&scx200_i2c_ops);
}
module_init(scx200_i2c_init);
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 93d483b..ec17d6b 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -347,13 +347,19 @@
if ((status & 0x80) || (control & 0x80)) {
/* RTC not running */
- u8 buf[16];
+ u8 buf[1+16]; /* First byte is interpreted as address */
struct i2c_msg msg[1];
dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__);
/* Initialize all, including STATUS and CONTROL to zero */
memset(buf, 0, sizeof(buf));
+
+ /* Write valid values in the date/time registers */
+ buf[1+DS1337_REG_DAY] = 1;
+ buf[1+DS1337_REG_DATE] = 1;
+ buf[1+DS1337_REG_MONTH] = 1;
+
msg[0].addr = client->addr;
msg[0].flags = 0;
msg[0].len = sizeof(buf);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7ca81f4..3e31f1d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -127,20 +127,17 @@
return sprintf(buf, "%s\n", client->name);
}
-/*
- * We can't use the DEVICE_ATTR() macro here as we want the same filename for a
- * different type of a device. So beware if the DEVICE_ATTR() macro ever
- * changes, this definition will also have to change.
+/*
+ * We can't use the DEVICE_ATTR() macro here, as we used the same name for
+ * an i2c adapter attribute (above).
*/
-static struct device_attribute dev_attr_client_name = {
- .attr = {.name = "name", .mode = S_IRUGO, .owner = THIS_MODULE },
- .show = &show_client_name,
-};
+static struct device_attribute dev_attr_client_name =
+ __ATTR(name, S_IRUGO, &show_client_name, NULL);
/* ---------------------------------------------------
- * registering functions
- * ---------------------------------------------------
+ * registering functions
+ * ---------------------------------------------------
*/
/* -----
@@ -314,7 +311,7 @@
res = driver_register(&driver->driver);
if (res)
return res;
-
+
mutex_lock(&core_lists);
list_add_tail(&driver->list,&drivers);
@@ -338,13 +335,13 @@
struct list_head *item1, *item2, *_n;
struct i2c_client *client;
struct i2c_adapter *adap;
-
+
int res = 0;
mutex_lock(&core_lists);
/* Have a look at each adapter, if clients of this driver are still
- * attached. If so, detach them to be able to kill the driver
+ * attached. If so, detach them to be able to kill the driver
* afterwards.
*/
list_for_each(item1,&adapters) {
@@ -419,14 +416,14 @@
goto out_unlock;
}
list_add_tail(&client->list,&adapter->clients);
-
+
client->usage_count = 0;
client->dev.parent = &client->adapter->dev;
client->dev.driver = &client->driver->driver;
client->dev.bus = &i2c_bus_type;
client->dev.release = &i2c_client_release;
-
+
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
@@ -467,7 +464,7 @@
{
struct i2c_adapter *adapter = client->adapter;
int res = 0;
-
+
if (client->usage_count > 0) {
dev_warn(&client->dev, "Client [%s] still busy, "
"can't detach\n", client->name);
@@ -535,10 +532,10 @@
__FUNCTION__);
return -EPERM;
}
-
+
client->usage_count--;
i2c_dec_use_client(client);
-
+
return 0;
}
@@ -603,7 +600,7 @@
}
#endif
- mutex_lock(&adap->bus_lock);
+ mutex_lock_nested(&adap->bus_lock, adap->level);
ret = adap->algo->master_xfer(adap,msgs,num);
mutex_unlock(&adap->bus_lock);
@@ -624,7 +621,7 @@
msg.flags = client->flags & I2C_M_TEN;
msg.len = count;
msg.buf = (char *)buf;
-
+
ret = i2c_transfer(adap, &msg, 1);
/* If everything went ok (i.e. 1 msg transmitted), return #bytes
@@ -757,7 +754,7 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
if (address_data->probe[0] == I2C_CLIENT_END
&& address_data->normal_i2c[0] == I2C_CLIENT_END)
- return 0;
+ return 0;
dev_warn(&adapter->dev, "SMBus Quick command not supported, "
"can't probe for chips\n");
@@ -817,7 +814,7 @@
struct i2c_adapter* i2c_get_adapter(int id)
{
struct i2c_adapter *adapter;
-
+
mutex_lock(&core_lists);
adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
if (adapter && !try_module_get(adapter->owner))
@@ -834,14 +831,14 @@
/* The SMBus parts */
-#define POLY (0x1070U << 3)
+#define POLY (0x1070U << 3)
static u8
crc8(u16 data)
{
int i;
-
+
for(i = 0; i < 8; i++) {
- if (data & 0x8000)
+ if (data & 0x8000)
data = data ^ POLY;
data = data << 1;
}
@@ -891,13 +888,13 @@
rpec, cpec);
return -1;
}
- return 0;
+ return 0;
}
s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
- value,0,I2C_SMBUS_QUICK,NULL);
+ value,0,I2C_SMBUS_QUICK,NULL);
}
s32 i2c_smbus_read_byte(struct i2c_client *client)
@@ -996,11 +993,11 @@
I2C_SMBUS_I2C_BLOCK_DATA, &data);
}
-/* Simulate a SMBus command using the i2c protocol
+/* Simulate a SMBus command using the i2c protocol
No checking of parameters is done! */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
/* So we need to generate a series of msgs. In the case of writing, we
@@ -1010,7 +1007,7 @@
unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
int num = read_write == I2C_SMBUS_READ?2:1;
- struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
+ struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
{ addr, flags | I2C_M_RD, 0, msgbuf1 }
};
int i;
@@ -1103,14 +1100,14 @@
if (i) {
/* Compute PEC if first message is a write */
if (!(msg[0].flags & I2C_M_RD)) {
- if (num == 1) /* Write only */
+ if (num == 1) /* Write only */
i2c_smbus_add_pec(&msg[0]);
else /* Write followed by read */
partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
}
/* Ask for PEC if last message is a read */
if (msg[num-1].flags & I2C_M_RD)
- msg[num-1].len++;
+ msg[num-1].len++;
}
if (i2c_transfer(adapter, msg, num) < 0)
@@ -1130,7 +1127,7 @@
case I2C_SMBUS_BYTE_DATA:
data->byte = msgbuf1[0];
break;
- case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_WORD_DATA:
case I2C_SMBUS_PROC_CALL:
data->word = msgbuf1[0] | (msgbuf1[1] << 8);
break;
@@ -1146,7 +1143,7 @@
s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
s32 res;
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 2e22a2f..ac5bd2a 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -1,5 +1,5 @@
/*
- i2c-dev.c - i2c-bus driver, char device interface
+ i2c-dev.c - i2c-bus driver, char device interface
Copyright (C) 1995-97 Simon G. Vogl
Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
@@ -90,6 +90,7 @@
spin_lock(&i2c_dev_list_lock);
list_del(&i2c_dev->list);
spin_unlock(&i2c_dev_list_lock);
+ kfree(i2c_dev);
}
static ssize_t show_adapter_name(struct device *dev,
@@ -172,7 +173,7 @@
switch ( cmd ) {
case I2C_SLAVE:
case I2C_SLAVE_FORCE:
- if ((arg > 0x3ff) ||
+ if ((arg > 0x3ff) ||
(((client->flags & I2C_M_TEN) == 0) && arg > 0x7f))
return -EINVAL;
if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg))
@@ -193,12 +194,11 @@
return 0;
case I2C_FUNCS:
funcs = i2c_get_functionality(client->adapter);
- return (copy_to_user((unsigned long __user *)arg, &funcs,
- sizeof(unsigned long)))?-EFAULT:0;
+ return put_user(funcs, (unsigned long __user *)arg);
case I2C_RDWR:
- if (copy_from_user(&rdwr_arg,
- (struct i2c_rdwr_ioctl_data __user *)arg,
+ if (copy_from_user(&rdwr_arg,
+ (struct i2c_rdwr_ioctl_data __user *)arg,
sizeof(rdwr_arg)))
return -EFAULT;
@@ -206,9 +206,9 @@
* be sent at once */
if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS)
return -EINVAL;
-
+
rdwr_pa = (struct i2c_msg *)
- kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
+ kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
GFP_KERNEL);
if (rdwr_pa == NULL) return -ENOMEM;
@@ -278,9 +278,9 @@
(struct i2c_smbus_ioctl_data __user *) arg,
sizeof(struct i2c_smbus_ioctl_data)))
return -EFAULT;
- if ((data_arg.size != I2C_SMBUS_BYTE) &&
+ if ((data_arg.size != I2C_SMBUS_BYTE) &&
(data_arg.size != I2C_SMBUS_QUICK) &&
- (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
+ (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
(data_arg.size != I2C_SMBUS_WORD_DATA) &&
(data_arg.size != I2C_SMBUS_PROC_CALL) &&
(data_arg.size != I2C_SMBUS_BLOCK_DATA) &&
@@ -291,11 +291,11 @@
data_arg.size);
return -EINVAL;
}
- /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
+ /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
so the check is valid if size==I2C_SMBUS_QUICK too. */
- if ((data_arg.read_write != I2C_SMBUS_READ) &&
+ if ((data_arg.read_write != I2C_SMBUS_READ) &&
(data_arg.read_write != I2C_SMBUS_WRITE)) {
- dev_dbg(&client->adapter->dev,
+ dev_dbg(&client->adapter->dev,
"read_write out of range (%x) in ioctl I2C_SMBUS.\n",
data_arg.read_write);
return -EINVAL;
@@ -304,7 +304,7 @@
/* Note that command values are always valid! */
if ((data_arg.size == I2C_SMBUS_QUICK) ||
- ((data_arg.size == I2C_SMBUS_BYTE) &&
+ ((data_arg.size == I2C_SMBUS_BYTE) &&
(data_arg.read_write == I2C_SMBUS_WRITE)))
/* These are special: we do not use data */
return i2c_smbus_xfer(client->adapter, client->addr,
@@ -322,14 +322,14 @@
if ((data_arg.size == I2C_SMBUS_BYTE_DATA) ||
(data_arg.size == I2C_SMBUS_BYTE))
datasize = sizeof(data_arg.data->byte);
- else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
+ else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
(data_arg.size == I2C_SMBUS_PROC_CALL))
datasize = sizeof(data_arg.data->word);
else /* size == smbus block, i2c block, or block proc. call */
datasize = sizeof(data_arg.data->block);
- if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
- (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(data_arg.read_write == I2C_SMBUS_WRITE)) {
if (copy_from_user(&temp, data_arg.data, datasize))
return -EFAULT;
@@ -337,8 +337,8 @@
res = i2c_smbus_xfer(client->adapter,client->addr,client->flags,
data_arg.read_write,
data_arg.command,data_arg.size,&temp);
- if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
- (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(data_arg.read_write == I2C_SMBUS_READ))) {
if (copy_to_user(data_arg.data, &temp, datasize))
return -EFAULT;
@@ -417,8 +417,8 @@
i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
MKDEV(I2C_MAJOR, adap->nr),
"i2c-%d", adap->nr);
- if (!i2c_dev->dev) {
- res = -ENODEV;
+ if (IS_ERR(i2c_dev->dev)) {
+ res = PTR_ERR(i2c_dev->dev);
goto error;
}
res = device_create_file(i2c_dev->dev, &dev_attr_name);
@@ -432,7 +432,6 @@
device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
error:
return_i2c_dev(i2c_dev);
- kfree(i2c_dev);
return res;
}
@@ -447,7 +446,6 @@
device_remove_file(i2c_dev->dev, &dev_attr_name);
return_i2c_dev(i2c_dev);
device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
- kfree(i2c_dev);
pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
return 0;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e23bc0d..3f82805 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -796,7 +796,7 @@
config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
int "Maximum transfer size (KB) per request (up to 128)"
default "128"
- depends BLK_DEV_IDE_AU1XXX
+ depends on BLK_DEV_IDE_AU1XXX
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 13a6179..fbb7f14 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1485,7 +1485,7 @@
}
- i2c_bit_del_bus(i2c_ad);
+ i2c_del_adapter(i2c_ad);
kfree(i2c_ad);
}
}
diff --git a/drivers/infiniband/core/Makefile b/drivers/infiniband/core/Makefile
index 163d991..50fb1cd 100644
--- a/drivers/infiniband/core/Makefile
+++ b/drivers/infiniband/core/Makefile
@@ -1,9 +1,11 @@
infiniband-$(CONFIG_INFINIBAND_ADDR_TRANS) := ib_addr.o rdma_cm.o
+user_access-$(CONFIG_INFINIBAND_ADDR_TRANS) := rdma_ucm.o
obj-$(CONFIG_INFINIBAND) += ib_core.o ib_mad.o ib_sa.o \
ib_cm.o iw_cm.o $(infiniband-y)
obj-$(CONFIG_INFINIBAND_USER_MAD) += ib_umad.o
-obj-$(CONFIG_INFINIBAND_USER_ACCESS) += ib_uverbs.o ib_ucm.o
+obj-$(CONFIG_INFINIBAND_USER_ACCESS) += ib_uverbs.o ib_ucm.o \
+ $(user_access-y)
ib_core-y := packer.o ud_header.o verbs.o sysfs.o \
device.o fmr_pool.o cache.o
@@ -18,6 +20,8 @@
rdma_cm-y := cma.o
+rdma_ucm-y := ucma.o
+
ib_addr-y := addr.o
ib_umad-y := user_mad.o
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 79c937b..d446998 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -3289,6 +3289,10 @@
spin_lock_irqsave(&cm_id_priv->lock, flags);
switch (cm_id_priv->id.state) {
+ /* Allow transition to RTS before sending REP */
+ case IB_CM_REQ_RCVD:
+ case IB_CM_MRA_REQ_SENT:
+
case IB_CM_REP_RCVD:
case IB_CM_MRA_REP_SENT:
case IB_CM_REP_SENT:
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 985a6b5..533193d 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -70,6 +70,7 @@
static struct workqueue_struct *cma_wq;
static DEFINE_IDR(sdp_ps);
static DEFINE_IDR(tcp_ps);
+static DEFINE_IDR(udp_ps);
struct cma_device {
struct list_head list;
@@ -133,7 +134,6 @@
u32 seq_num;
u32 qp_num;
- enum ib_qp_type qp_type;
u8 srq;
};
@@ -392,7 +392,6 @@
id->qp = qp;
id_priv->qp_num = qp->qp_num;
- id_priv->qp_type = qp->qp_type;
id_priv->srq = (qp->srq != NULL);
return 0;
err:
@@ -510,9 +509,17 @@
return cma_zero_addr(addr) || cma_loopback_addr(addr);
}
+static inline __be16 cma_port(struct sockaddr *addr)
+{
+ if (addr->sa_family == AF_INET)
+ return ((struct sockaddr_in *) addr)->sin_port;
+ else
+ return ((struct sockaddr_in6 *) addr)->sin6_port;
+}
+
static inline int cma_any_port(struct sockaddr *addr)
{
- return !((struct sockaddr_in *) addr)->sin_port;
+ return !cma_port(addr);
}
static int cma_get_net_info(void *hdr, enum rdma_port_space ps,
@@ -594,20 +601,6 @@
}
}
-static int cma_notify_user(struct rdma_id_private *id_priv,
- enum rdma_cm_event_type type, int status,
- void *data, u8 data_len)
-{
- struct rdma_cm_event event;
-
- event.event = type;
- event.status = status;
- event.private_data = data;
- event.private_data_len = data_len;
-
- return id_priv->id.event_handler(&id_priv->id, &event);
-}
-
static void cma_cancel_route(struct rdma_id_private *id_priv)
{
switch (rdma_node_get_transport(id_priv->id.device->node_type)) {
@@ -776,63 +769,61 @@
return 0;
}
-static int cma_rtu_recv(struct rdma_id_private *id_priv)
+static void cma_set_rep_event_data(struct rdma_cm_event *event,
+ struct ib_cm_rep_event_param *rep_data,
+ void *private_data)
{
- int ret;
-
- ret = cma_modify_qp_rts(&id_priv->id);
- if (ret)
- goto reject;
-
- return 0;
-reject:
- cma_modify_qp_err(&id_priv->id);
- ib_send_cm_rej(id_priv->cm_id.ib, IB_CM_REJ_CONSUMER_DEFINED,
- NULL, 0, NULL, 0);
- return ret;
+ event->param.conn.private_data = private_data;
+ event->param.conn.private_data_len = IB_CM_REP_PRIVATE_DATA_SIZE;
+ event->param.conn.responder_resources = rep_data->responder_resources;
+ event->param.conn.initiator_depth = rep_data->initiator_depth;
+ event->param.conn.flow_control = rep_data->flow_control;
+ event->param.conn.rnr_retry_count = rep_data->rnr_retry_count;
+ event->param.conn.srq = rep_data->srq;
+ event->param.conn.qp_num = rep_data->remote_qpn;
}
static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
{
struct rdma_id_private *id_priv = cm_id->context;
- enum rdma_cm_event_type event;
- u8 private_data_len = 0;
- int ret = 0, status = 0;
+ struct rdma_cm_event event;
+ int ret = 0;
atomic_inc(&id_priv->dev_remove);
if (!cma_comp(id_priv, CMA_CONNECT))
goto out;
+ memset(&event, 0, sizeof event);
switch (ib_event->event) {
case IB_CM_REQ_ERROR:
case IB_CM_REP_ERROR:
- event = RDMA_CM_EVENT_UNREACHABLE;
- status = -ETIMEDOUT;
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ event.status = -ETIMEDOUT;
break;
case IB_CM_REP_RECEIVED:
- status = cma_verify_rep(id_priv, ib_event->private_data);
- if (status)
- event = RDMA_CM_EVENT_CONNECT_ERROR;
+ event.status = cma_verify_rep(id_priv, ib_event->private_data);
+ if (event.status)
+ event.event = RDMA_CM_EVENT_CONNECT_ERROR;
else if (id_priv->id.qp && id_priv->id.ps != RDMA_PS_SDP) {
- status = cma_rep_recv(id_priv);
- event = status ? RDMA_CM_EVENT_CONNECT_ERROR :
- RDMA_CM_EVENT_ESTABLISHED;
+ event.status = cma_rep_recv(id_priv);
+ event.event = event.status ? RDMA_CM_EVENT_CONNECT_ERROR :
+ RDMA_CM_EVENT_ESTABLISHED;
} else
- event = RDMA_CM_EVENT_CONNECT_RESPONSE;
- private_data_len = IB_CM_REP_PRIVATE_DATA_SIZE;
+ event.event = RDMA_CM_EVENT_CONNECT_RESPONSE;
+ cma_set_rep_event_data(&event, &ib_event->param.rep_rcvd,
+ ib_event->private_data);
break;
case IB_CM_RTU_RECEIVED:
- status = cma_rtu_recv(id_priv);
- event = status ? RDMA_CM_EVENT_CONNECT_ERROR :
- RDMA_CM_EVENT_ESTABLISHED;
+ case IB_CM_USER_ESTABLISHED:
+ event.event = RDMA_CM_EVENT_ESTABLISHED;
break;
case IB_CM_DREQ_ERROR:
- status = -ETIMEDOUT; /* fall through */
+ event.status = -ETIMEDOUT; /* fall through */
case IB_CM_DREQ_RECEIVED:
case IB_CM_DREP_RECEIVED:
if (!cma_comp_exch(id_priv, CMA_CONNECT, CMA_DISCONNECT))
goto out;
- event = RDMA_CM_EVENT_DISCONNECTED;
+ event.event = RDMA_CM_EVENT_DISCONNECTED;
break;
case IB_CM_TIMEWAIT_EXIT:
case IB_CM_MRA_RECEIVED:
@@ -840,9 +831,10 @@
goto out;
case IB_CM_REJ_RECEIVED:
cma_modify_qp_err(&id_priv->id);
- status = ib_event->param.rej_rcvd.reason;
- event = RDMA_CM_EVENT_REJECTED;
- private_data_len = IB_CM_REJ_PRIVATE_DATA_SIZE;
+ event.status = ib_event->param.rej_rcvd.reason;
+ event.event = RDMA_CM_EVENT_REJECTED;
+ event.param.conn.private_data = ib_event->private_data;
+ event.param.conn.private_data_len = IB_CM_REJ_PRIVATE_DATA_SIZE;
break;
default:
printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d",
@@ -850,8 +842,7 @@
goto out;
}
- ret = cma_notify_user(id_priv, event, status, ib_event->private_data,
- private_data_len);
+ ret = id_priv->id.event_handler(&id_priv->id, &event);
if (ret) {
/* Destroy the CM ID by returning a non-zero value. */
id_priv->cm_id.ib = NULL;
@@ -865,8 +856,8 @@
return ret;
}
-static struct rdma_id_private *cma_new_id(struct rdma_cm_id *listen_id,
- struct ib_cm_event *ib_event)
+static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id,
+ struct ib_cm_event *ib_event)
{
struct rdma_id_private *id_priv;
struct rdma_cm_id *id;
@@ -913,9 +904,61 @@
return NULL;
}
+static struct rdma_id_private *cma_new_udp_id(struct rdma_cm_id *listen_id,
+ struct ib_cm_event *ib_event)
+{
+ struct rdma_id_private *id_priv;
+ struct rdma_cm_id *id;
+ union cma_ip_addr *src, *dst;
+ __u16 port;
+ u8 ip_ver;
+ int ret;
+
+ id = rdma_create_id(listen_id->event_handler, listen_id->context,
+ listen_id->ps);
+ if (IS_ERR(id))
+ return NULL;
+
+
+ if (cma_get_net_info(ib_event->private_data, listen_id->ps,
+ &ip_ver, &port, &src, &dst))
+ goto err;
+
+ cma_save_net_info(&id->route.addr, &listen_id->route.addr,
+ ip_ver, port, src, dst);
+
+ ret = rdma_translate_ip(&id->route.addr.src_addr,
+ &id->route.addr.dev_addr);
+ if (ret)
+ goto err;
+
+ id_priv = container_of(id, struct rdma_id_private, id);
+ id_priv->state = CMA_CONNECT;
+ return id_priv;
+err:
+ rdma_destroy_id(id);
+ return NULL;
+}
+
+static void cma_set_req_event_data(struct rdma_cm_event *event,
+ struct ib_cm_req_event_param *req_data,
+ void *private_data, int offset)
+{
+ event->param.conn.private_data = private_data + offset;
+ event->param.conn.private_data_len = IB_CM_REQ_PRIVATE_DATA_SIZE - offset;
+ event->param.conn.responder_resources = req_data->responder_resources;
+ event->param.conn.initiator_depth = req_data->initiator_depth;
+ event->param.conn.flow_control = req_data->flow_control;
+ event->param.conn.retry_count = req_data->retry_count;
+ event->param.conn.rnr_retry_count = req_data->rnr_retry_count;
+ event->param.conn.srq = req_data->srq;
+ event->param.conn.qp_num = req_data->remote_qpn;
+}
+
static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
{
struct rdma_id_private *listen_id, *conn_id;
+ struct rdma_cm_event event;
int offset, ret;
listen_id = cm_id->context;
@@ -925,7 +968,19 @@
goto out;
}
- conn_id = cma_new_id(&listen_id->id, ib_event);
+ memset(&event, 0, sizeof event);
+ offset = cma_user_data_offset(listen_id->id.ps);
+ event.event = RDMA_CM_EVENT_CONNECT_REQUEST;
+ if (listen_id->id.ps == RDMA_PS_UDP) {
+ conn_id = cma_new_udp_id(&listen_id->id, ib_event);
+ event.param.ud.private_data = ib_event->private_data + offset;
+ event.param.ud.private_data_len =
+ IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE - offset;
+ } else {
+ conn_id = cma_new_conn_id(&listen_id->id, ib_event);
+ cma_set_req_event_data(&event, &ib_event->param.req_rcvd,
+ ib_event->private_data, offset);
+ }
if (!conn_id) {
ret = -ENOMEM;
goto out;
@@ -942,10 +997,7 @@
cm_id->context = conn_id;
cm_id->cm_handler = cma_ib_handler;
- offset = cma_user_data_offset(listen_id->id.ps);
- ret = cma_notify_user(conn_id, RDMA_CM_EVENT_CONNECT_REQUEST, 0,
- ib_event->private_data + offset,
- IB_CM_REQ_PRIVATE_DATA_SIZE - offset);
+ ret = conn_id->id.event_handler(&conn_id->id, &event);
if (!ret)
goto out;
@@ -964,8 +1016,7 @@
static __be64 cma_get_service_id(enum rdma_port_space ps, struct sockaddr *addr)
{
- return cpu_to_be64(((u64)ps << 16) +
- be16_to_cpu(((struct sockaddr_in *) addr)->sin_port));
+ return cpu_to_be64(((u64)ps << 16) + be16_to_cpu(cma_port(addr)));
}
static void cma_set_compare_data(enum rdma_port_space ps, struct sockaddr *addr,
@@ -1021,15 +1072,16 @@
static int cma_iw_handler(struct iw_cm_id *iw_id, struct iw_cm_event *iw_event)
{
struct rdma_id_private *id_priv = iw_id->context;
- enum rdma_cm_event_type event = 0;
+ struct rdma_cm_event event;
struct sockaddr_in *sin;
int ret = 0;
+ memset(&event, 0, sizeof event);
atomic_inc(&id_priv->dev_remove);
switch (iw_event->event) {
case IW_CM_EVENT_CLOSE:
- event = RDMA_CM_EVENT_DISCONNECTED;
+ event.event = RDMA_CM_EVENT_DISCONNECTED;
break;
case IW_CM_EVENT_CONNECT_REPLY:
sin = (struct sockaddr_in *) &id_priv->id.route.addr.src_addr;
@@ -1037,20 +1089,21 @@
sin = (struct sockaddr_in *) &id_priv->id.route.addr.dst_addr;
*sin = iw_event->remote_addr;
if (iw_event->status)
- event = RDMA_CM_EVENT_REJECTED;
+ event.event = RDMA_CM_EVENT_REJECTED;
else
- event = RDMA_CM_EVENT_ESTABLISHED;
+ event.event = RDMA_CM_EVENT_ESTABLISHED;
break;
case IW_CM_EVENT_ESTABLISHED:
- event = RDMA_CM_EVENT_ESTABLISHED;
+ event.event = RDMA_CM_EVENT_ESTABLISHED;
break;
default:
BUG_ON(1);
}
- ret = cma_notify_user(id_priv, event, iw_event->status,
- iw_event->private_data,
- iw_event->private_data_len);
+ event.status = iw_event->status;
+ event.param.conn.private_data = iw_event->private_data;
+ event.param.conn.private_data_len = iw_event->private_data_len;
+ ret = id_priv->id.event_handler(&id_priv->id, &event);
if (ret) {
/* Destroy the CM ID by returning a non-zero value. */
id_priv->cm_id.iw = NULL;
@@ -1071,6 +1124,7 @@
struct rdma_id_private *listen_id, *conn_id;
struct sockaddr_in *sin;
struct net_device *dev = NULL;
+ struct rdma_cm_event event;
int ret;
listen_id = cm_id->context;
@@ -1124,9 +1178,11 @@
sin = (struct sockaddr_in *) &new_cm_id->route.addr.dst_addr;
*sin = iw_event->remote_addr;
- ret = cma_notify_user(conn_id, RDMA_CM_EVENT_CONNECT_REQUEST, 0,
- iw_event->private_data,
- iw_event->private_data_len);
+ memset(&event, 0, sizeof event);
+ event.event = RDMA_CM_EVENT_CONNECT_REQUEST;
+ event.param.conn.private_data = iw_event->private_data;
+ event.param.conn.private_data_len = iw_event->private_data_len;
+ ret = conn_id->id.event_handler(&conn_id->id, &event);
if (ret) {
/* User wants to destroy the CM ID */
conn_id->cm_id.iw = NULL;
@@ -1515,8 +1571,9 @@
struct rdma_dev_addr *dev_addr, void *context)
{
struct rdma_id_private *id_priv = context;
- enum rdma_cm_event_type event;
+ struct rdma_cm_event event;
+ memset(&event, 0, sizeof event);
atomic_inc(&id_priv->dev_remove);
/*
@@ -1536,14 +1593,15 @@
if (status) {
if (!cma_comp_exch(id_priv, CMA_ADDR_RESOLVED, CMA_ADDR_BOUND))
goto out;
- event = RDMA_CM_EVENT_ADDR_ERROR;
+ event.event = RDMA_CM_EVENT_ADDR_ERROR;
+ event.status = status;
} else {
memcpy(&id_priv->id.route.addr.src_addr, src_addr,
ip_addr_size(src_addr));
- event = RDMA_CM_EVENT_ADDR_RESOLVED;
+ event.event = RDMA_CM_EVENT_ADDR_RESOLVED;
}
- if (cma_notify_user(id_priv, event, status, NULL, 0)) {
+ if (id_priv->id.event_handler(&id_priv->id, &event)) {
cma_exch(id_priv, CMA_DESTROYING);
cma_release_remove(id_priv);
cma_deref_id(id_priv);
@@ -1733,6 +1791,9 @@
case RDMA_PS_TCP:
ps = &tcp_ps;
break;
+ case RDMA_PS_UDP:
+ ps = &udp_ps;
+ break;
default:
return -EPROTONOSUPPORT;
}
@@ -1821,6 +1882,110 @@
return 0;
}
+static int cma_sidr_rep_handler(struct ib_cm_id *cm_id,
+ struct ib_cm_event *ib_event)
+{
+ struct rdma_id_private *id_priv = cm_id->context;
+ struct rdma_cm_event event;
+ struct ib_cm_sidr_rep_event_param *rep = &ib_event->param.sidr_rep_rcvd;
+ int ret = 0;
+
+ memset(&event, 0, sizeof event);
+ atomic_inc(&id_priv->dev_remove);
+ if (!cma_comp(id_priv, CMA_CONNECT))
+ goto out;
+
+ switch (ib_event->event) {
+ case IB_CM_SIDR_REQ_ERROR:
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ event.status = -ETIMEDOUT;
+ break;
+ case IB_CM_SIDR_REP_RECEIVED:
+ event.param.ud.private_data = ib_event->private_data;
+ event.param.ud.private_data_len = IB_CM_SIDR_REP_PRIVATE_DATA_SIZE;
+ if (rep->status != IB_SIDR_SUCCESS) {
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ event.status = ib_event->param.sidr_rep_rcvd.status;
+ break;
+ }
+ if (rep->qkey != RDMA_UD_QKEY) {
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ event.status = -EINVAL;
+ break;
+ }
+ ib_init_ah_from_path(id_priv->id.device, id_priv->id.port_num,
+ id_priv->id.route.path_rec,
+ &event.param.ud.ah_attr);
+ event.param.ud.qp_num = rep->qpn;
+ event.param.ud.qkey = rep->qkey;
+ event.event = RDMA_CM_EVENT_ESTABLISHED;
+ event.status = 0;
+ break;
+ default:
+ printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d",
+ ib_event->event);
+ goto out;
+ }
+
+ ret = id_priv->id.event_handler(&id_priv->id, &event);
+ if (ret) {
+ /* Destroy the CM ID by returning a non-zero value. */
+ id_priv->cm_id.ib = NULL;
+ cma_exch(id_priv, CMA_DESTROYING);
+ cma_release_remove(id_priv);
+ rdma_destroy_id(&id_priv->id);
+ return ret;
+ }
+out:
+ cma_release_remove(id_priv);
+ return ret;
+}
+
+static int cma_resolve_ib_udp(struct rdma_id_private *id_priv,
+ struct rdma_conn_param *conn_param)
+{
+ struct ib_cm_sidr_req_param req;
+ struct rdma_route *route;
+ int ret;
+
+ req.private_data_len = sizeof(struct cma_hdr) +
+ conn_param->private_data_len;
+ req.private_data = kzalloc(req.private_data_len, GFP_ATOMIC);
+ if (!req.private_data)
+ return -ENOMEM;
+
+ if (conn_param->private_data && conn_param->private_data_len)
+ memcpy((void *) req.private_data + sizeof(struct cma_hdr),
+ conn_param->private_data, conn_param->private_data_len);
+
+ route = &id_priv->id.route;
+ ret = cma_format_hdr((void *) req.private_data, id_priv->id.ps, route);
+ if (ret)
+ goto out;
+
+ id_priv->cm_id.ib = ib_create_cm_id(id_priv->id.device,
+ cma_sidr_rep_handler, id_priv);
+ if (IS_ERR(id_priv->cm_id.ib)) {
+ ret = PTR_ERR(id_priv->cm_id.ib);
+ goto out;
+ }
+
+ req.path = route->path_rec;
+ req.service_id = cma_get_service_id(id_priv->id.ps,
+ &route->addr.dst_addr);
+ req.timeout_ms = 1 << (CMA_CM_RESPONSE_TIMEOUT - 8);
+ req.max_cm_retries = CMA_MAX_CM_RETRIES;
+
+ ret = ib_send_cm_sidr_req(id_priv->cm_id.ib, &req);
+ if (ret) {
+ ib_destroy_cm_id(id_priv->cm_id.ib);
+ id_priv->cm_id.ib = NULL;
+ }
+out:
+ kfree(req.private_data);
+ return ret;
+}
+
static int cma_connect_ib(struct rdma_id_private *id_priv,
struct rdma_conn_param *conn_param)
{
@@ -1860,7 +2025,7 @@
req.service_id = cma_get_service_id(id_priv->id.ps,
&route->addr.dst_addr);
req.qp_num = id_priv->qp_num;
- req.qp_type = id_priv->qp_type;
+ req.qp_type = IB_QPT_RC;
req.starting_psn = id_priv->seq_num;
req.responder_resources = conn_param->responder_resources;
req.initiator_depth = conn_param->initiator_depth;
@@ -1937,13 +2102,15 @@
if (!id->qp) {
id_priv->qp_num = conn_param->qp_num;
- id_priv->qp_type = conn_param->qp_type;
id_priv->srq = conn_param->srq;
}
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- ret = cma_connect_ib(id_priv, conn_param);
+ if (id->ps == RDMA_PS_UDP)
+ ret = cma_resolve_ib_udp(id_priv, conn_param);
+ else
+ ret = cma_connect_ib(id_priv, conn_param);
break;
case RDMA_TRANSPORT_IWARP:
ret = cma_connect_iw(id_priv, conn_param);
@@ -1966,11 +2133,25 @@
struct rdma_conn_param *conn_param)
{
struct ib_cm_rep_param rep;
- int ret;
+ struct ib_qp_attr qp_attr;
+ int qp_attr_mask, ret;
- ret = cma_modify_qp_rtr(&id_priv->id);
- if (ret)
- return ret;
+ if (id_priv->id.qp) {
+ ret = cma_modify_qp_rtr(&id_priv->id);
+ if (ret)
+ goto out;
+
+ qp_attr.qp_state = IB_QPS_RTS;
+ ret = ib_cm_init_qp_attr(id_priv->cm_id.ib, &qp_attr,
+ &qp_attr_mask);
+ if (ret)
+ goto out;
+
+ qp_attr.max_rd_atomic = conn_param->initiator_depth;
+ ret = ib_modify_qp(id_priv->id.qp, &qp_attr, qp_attr_mask);
+ if (ret)
+ goto out;
+ }
memset(&rep, 0, sizeof rep);
rep.qp_num = id_priv->qp_num;
@@ -1985,7 +2166,9 @@
rep.rnr_retry_count = conn_param->rnr_retry_count;
rep.srq = id_priv->srq ? 1 : 0;
- return ib_send_cm_rep(id_priv->cm_id.ib, &rep);
+ ret = ib_send_cm_rep(id_priv->cm_id.ib, &rep);
+out:
+ return ret;
}
static int cma_accept_iw(struct rdma_id_private *id_priv,
@@ -2010,6 +2193,24 @@
return iw_cm_accept(id_priv->cm_id.iw, &iw_param);
}
+static int cma_send_sidr_rep(struct rdma_id_private *id_priv,
+ enum ib_cm_sidr_status status,
+ const void *private_data, int private_data_len)
+{
+ struct ib_cm_sidr_rep_param rep;
+
+ memset(&rep, 0, sizeof rep);
+ rep.status = status;
+ if (status == IB_SIDR_SUCCESS) {
+ rep.qp_num = id_priv->qp_num;
+ rep.qkey = RDMA_UD_QKEY;
+ }
+ rep.private_data = private_data;
+ rep.private_data_len = private_data_len;
+
+ return ib_send_cm_sidr_rep(id_priv->cm_id.ib, &rep);
+}
+
int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param)
{
struct rdma_id_private *id_priv;
@@ -2021,13 +2222,16 @@
if (!id->qp && conn_param) {
id_priv->qp_num = conn_param->qp_num;
- id_priv->qp_type = conn_param->qp_type;
id_priv->srq = conn_param->srq;
}
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- if (conn_param)
+ if (id->ps == RDMA_PS_UDP)
+ ret = cma_send_sidr_rep(id_priv, IB_SIDR_SUCCESS,
+ conn_param->private_data,
+ conn_param->private_data_len);
+ else if (conn_param)
ret = cma_accept_ib(id_priv, conn_param);
else
ret = cma_rep_recv(id_priv);
@@ -2051,6 +2255,27 @@
}
EXPORT_SYMBOL(rdma_accept);
+int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event)
+{
+ struct rdma_id_private *id_priv;
+ int ret;
+
+ id_priv = container_of(id, struct rdma_id_private, id);
+ if (!cma_comp(id_priv, CMA_CONNECT))
+ return -EINVAL;
+
+ switch (id->device->node_type) {
+ case RDMA_NODE_IB_CA:
+ ret = ib_cm_notify(id_priv->cm_id.ib, event);
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+EXPORT_SYMBOL(rdma_notify);
+
int rdma_reject(struct rdma_cm_id *id, const void *private_data,
u8 private_data_len)
{
@@ -2063,9 +2288,13 @@
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- ret = ib_send_cm_rej(id_priv->cm_id.ib,
- IB_CM_REJ_CONSUMER_DEFINED, NULL, 0,
- private_data, private_data_len);
+ if (id->ps == RDMA_PS_UDP)
+ ret = cma_send_sidr_rep(id_priv, IB_SIDR_REJECT,
+ private_data, private_data_len);
+ else
+ ret = ib_send_cm_rej(id_priv->cm_id.ib,
+ IB_CM_REJ_CONSUMER_DEFINED, NULL,
+ 0, private_data, private_data_len);
break;
case RDMA_TRANSPORT_IWARP:
ret = iw_cm_reject(id_priv->cm_id.iw,
@@ -2136,6 +2365,7 @@
static int cma_remove_id_dev(struct rdma_id_private *id_priv)
{
+ struct rdma_cm_event event;
enum cma_state state;
/* Record that we want to remove the device */
@@ -2150,8 +2380,9 @@
if (!cma_comp(id_priv, CMA_DEVICE_REMOVAL))
return 0;
- return cma_notify_user(id_priv, RDMA_CM_EVENT_DEVICE_REMOVAL,
- 0, NULL, 0);
+ memset(&event, 0, sizeof event);
+ event.event = RDMA_CM_EVENT_DEVICE_REMOVAL;
+ return id_priv->id.event_handler(&id_priv->id, &event);
}
static void cma_process_remove(struct cma_device *cma_dev)
@@ -2233,6 +2464,7 @@
destroy_workqueue(cma_wq);
idr_destroy(&sdp_ps);
idr_destroy(&tcp_ps);
+ idr_destroy(&udp_ps);
}
module_init(cma_init);
diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
index 86a3b2d..8926a2b 100644
--- a/drivers/infiniband/core/fmr_pool.c
+++ b/drivers/infiniband/core/fmr_pool.c
@@ -394,20 +394,12 @@
*/
int ib_flush_fmr_pool(struct ib_fmr_pool *pool)
{
- int serial;
-
- atomic_inc(&pool->req_ser);
- /*
- * It's OK if someone else bumps req_ser again here -- we'll
- * just wait a little longer.
- */
- serial = atomic_read(&pool->req_ser);
+ int serial = atomic_inc_return(&pool->req_ser);
wake_up_process(pool->thread);
if (wait_event_interruptible(pool->force_wait,
- atomic_read(&pool->flush_ser) -
- atomic_read(&pool->req_ser) >= 0))
+ atomic_read(&pool->flush_ser) - serial >= 0))
return -EINTR;
return 0;
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 15f38d9..5ed141e 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -998,17 +998,17 @@
mad_agent = mad_send_wr->send_buf.mad_agent;
sge = mad_send_wr->sg_list;
- sge[0].addr = dma_map_single(mad_agent->device->dma_device,
- mad_send_wr->send_buf.mad,
- sge[0].length,
- DMA_TO_DEVICE);
- pci_unmap_addr_set(mad_send_wr, header_mapping, sge[0].addr);
+ sge[0].addr = ib_dma_map_single(mad_agent->device,
+ mad_send_wr->send_buf.mad,
+ sge[0].length,
+ DMA_TO_DEVICE);
+ mad_send_wr->header_mapping = sge[0].addr;
- sge[1].addr = dma_map_single(mad_agent->device->dma_device,
- ib_get_payload(mad_send_wr),
- sge[1].length,
- DMA_TO_DEVICE);
- pci_unmap_addr_set(mad_send_wr, payload_mapping, sge[1].addr);
+ sge[1].addr = ib_dma_map_single(mad_agent->device,
+ ib_get_payload(mad_send_wr),
+ sge[1].length,
+ DMA_TO_DEVICE);
+ mad_send_wr->payload_mapping = sge[1].addr;
spin_lock_irqsave(&qp_info->send_queue.lock, flags);
if (qp_info->send_queue.count < qp_info->send_queue.max_active) {
@@ -1026,12 +1026,12 @@
}
spin_unlock_irqrestore(&qp_info->send_queue.lock, flags);
if (ret) {
- dma_unmap_single(mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, header_mapping),
- sge[0].length, DMA_TO_DEVICE);
- dma_unmap_single(mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, payload_mapping),
- sge[1].length, DMA_TO_DEVICE);
+ ib_dma_unmap_single(mad_agent->device,
+ mad_send_wr->header_mapping,
+ sge[0].length, DMA_TO_DEVICE);
+ ib_dma_unmap_single(mad_agent->device,
+ mad_send_wr->payload_mapping,
+ sge[1].length, DMA_TO_DEVICE);
}
return ret;
}
@@ -1850,11 +1850,11 @@
mad_priv_hdr = container_of(mad_list, struct ib_mad_private_header,
mad_list);
recv = container_of(mad_priv_hdr, struct ib_mad_private, header);
- dma_unmap_single(port_priv->device->dma_device,
- pci_unmap_addr(&recv->header, mapping),
- sizeof(struct ib_mad_private) -
- sizeof(struct ib_mad_private_header),
- DMA_FROM_DEVICE);
+ ib_dma_unmap_single(port_priv->device,
+ recv->header.mapping,
+ sizeof(struct ib_mad_private) -
+ sizeof(struct ib_mad_private_header),
+ DMA_FROM_DEVICE);
/* Setup MAD receive work completion from "normal" work completion */
recv->header.wc = *wc;
@@ -2080,12 +2080,12 @@
qp_info = send_queue->qp_info;
retry:
- dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, header_mapping),
- mad_send_wr->sg_list[0].length, DMA_TO_DEVICE);
- dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, payload_mapping),
- mad_send_wr->sg_list[1].length, DMA_TO_DEVICE);
+ ib_dma_unmap_single(mad_send_wr->send_buf.mad_agent->device,
+ mad_send_wr->header_mapping,
+ mad_send_wr->sg_list[0].length, DMA_TO_DEVICE);
+ ib_dma_unmap_single(mad_send_wr->send_buf.mad_agent->device,
+ mad_send_wr->payload_mapping,
+ mad_send_wr->sg_list[1].length, DMA_TO_DEVICE);
queued_send_wr = NULL;
spin_lock_irqsave(&send_queue->lock, flags);
list_del(&mad_list->list);
@@ -2528,13 +2528,12 @@
break;
}
}
- sg_list.addr = dma_map_single(qp_info->port_priv->
- device->dma_device,
- &mad_priv->grh,
- sizeof *mad_priv -
- sizeof mad_priv->header,
- DMA_FROM_DEVICE);
- pci_unmap_addr_set(&mad_priv->header, mapping, sg_list.addr);
+ sg_list.addr = ib_dma_map_single(qp_info->port_priv->device,
+ &mad_priv->grh,
+ sizeof *mad_priv -
+ sizeof mad_priv->header,
+ DMA_FROM_DEVICE);
+ mad_priv->header.mapping = sg_list.addr;
recv_wr.wr_id = (unsigned long)&mad_priv->header.mad_list;
mad_priv->header.mad_list.mad_queue = recv_queue;
@@ -2549,12 +2548,11 @@
list_del(&mad_priv->header.mad_list.list);
recv_queue->count--;
spin_unlock_irqrestore(&recv_queue->lock, flags);
- dma_unmap_single(qp_info->port_priv->device->dma_device,
- pci_unmap_addr(&mad_priv->header,
- mapping),
- sizeof *mad_priv -
- sizeof mad_priv->header,
- DMA_FROM_DEVICE);
+ ib_dma_unmap_single(qp_info->port_priv->device,
+ mad_priv->header.mapping,
+ sizeof *mad_priv -
+ sizeof mad_priv->header,
+ DMA_FROM_DEVICE);
kmem_cache_free(ib_mad_cache, mad_priv);
printk(KERN_ERR PFX "ib_post_recv failed: %d\n", ret);
break;
@@ -2586,11 +2584,11 @@
/* Remove from posted receive MAD list */
list_del(&mad_list->list);
- dma_unmap_single(qp_info->port_priv->device->dma_device,
- pci_unmap_addr(&recv->header, mapping),
- sizeof(struct ib_mad_private) -
- sizeof(struct ib_mad_private_header),
- DMA_FROM_DEVICE);
+ ib_dma_unmap_single(qp_info->port_priv->device,
+ recv->header.mapping,
+ sizeof(struct ib_mad_private) -
+ sizeof(struct ib_mad_private_header),
+ DMA_FROM_DEVICE);
kmem_cache_free(ib_mad_cache, recv);
}
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index d5548e7..de89717 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -73,7 +73,7 @@
struct ib_mad_list_head mad_list;
struct ib_mad_recv_wc recv_wc;
struct ib_wc wc;
- DECLARE_PCI_UNMAP_ADDR(mapping)
+ u64 mapping;
} __attribute__ ((packed));
struct ib_mad_private {
@@ -126,8 +126,8 @@
struct list_head agent_list;
struct ib_mad_agent_private *mad_agent_priv;
struct ib_mad_send_buf send_buf;
- DECLARE_PCI_UNMAP_ADDR(header_mapping)
- DECLARE_PCI_UNMAP_ADDR(payload_mapping)
+ u64 header_mapping;
+ u64 payload_mapping;
struct ib_send_wr send_wr;
struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG];
__be64 tid;
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
new file mode 100644
index 0000000..81a5cdc
--- /dev/null
+++ b/drivers/infiniband/core/ucma.c
@@ -0,0 +1,874 @@
+/*
+ * Copyright (c) 2005-2006 Intel Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/idr.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <linux/miscdevice.h>
+
+#include <rdma/rdma_user_cm.h>
+#include <rdma/ib_marshall.h>
+#include <rdma/rdma_cm.h>
+
+MODULE_AUTHOR("Sean Hefty");
+MODULE_DESCRIPTION("RDMA Userspace Connection Manager Access");
+MODULE_LICENSE("Dual BSD/GPL");
+
+enum {
+ UCMA_MAX_BACKLOG = 128
+};
+
+struct ucma_file {
+ struct mutex mut;
+ struct file *filp;
+ struct list_head ctx_list;
+ struct list_head event_list;
+ wait_queue_head_t poll_wait;
+};
+
+struct ucma_context {
+ int id;
+ struct completion comp;
+ atomic_t ref;
+ int events_reported;
+ int backlog;
+
+ struct ucma_file *file;
+ struct rdma_cm_id *cm_id;
+ u64 uid;
+
+ struct list_head list;
+};
+
+struct ucma_event {
+ struct ucma_context *ctx;
+ struct list_head list;
+ struct rdma_cm_id *cm_id;
+ struct rdma_ucm_event_resp resp;
+};
+
+static DEFINE_MUTEX(mut);
+static DEFINE_IDR(ctx_idr);
+
+static inline struct ucma_context *_ucma_find_context(int id,
+ struct ucma_file *file)
+{
+ struct ucma_context *ctx;
+
+ ctx = idr_find(&ctx_idr, id);
+ if (!ctx)
+ ctx = ERR_PTR(-ENOENT);
+ else if (ctx->file != file)
+ ctx = ERR_PTR(-EINVAL);
+ return ctx;
+}
+
+static struct ucma_context *ucma_get_ctx(struct ucma_file *file, int id)
+{
+ struct ucma_context *ctx;
+
+ mutex_lock(&mut);
+ ctx = _ucma_find_context(id, file);
+ if (!IS_ERR(ctx))
+ atomic_inc(&ctx->ref);
+ mutex_unlock(&mut);
+ return ctx;
+}
+
+static void ucma_put_ctx(struct ucma_context *ctx)
+{
+ if (atomic_dec_and_test(&ctx->ref))
+ complete(&ctx->comp);
+}
+
+static struct ucma_context *ucma_alloc_ctx(struct ucma_file *file)
+{
+ struct ucma_context *ctx;
+ int ret;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return NULL;
+
+ atomic_set(&ctx->ref, 1);
+ init_completion(&ctx->comp);
+ ctx->file = file;
+
+ do {
+ ret = idr_pre_get(&ctx_idr, GFP_KERNEL);
+ if (!ret)
+ goto error;
+
+ mutex_lock(&mut);
+ ret = idr_get_new(&ctx_idr, ctx, &ctx->id);
+ mutex_unlock(&mut);
+ } while (ret == -EAGAIN);
+
+ if (ret)
+ goto error;
+
+ list_add_tail(&ctx->list, &file->ctx_list);
+ return ctx;
+
+error:
+ kfree(ctx);
+ return NULL;
+}
+
+static void ucma_copy_conn_event(struct rdma_ucm_conn_param *dst,
+ struct rdma_conn_param *src)
+{
+ if (src->private_data_len)
+ memcpy(dst->private_data, src->private_data,
+ src->private_data_len);
+ dst->private_data_len = src->private_data_len;
+ dst->responder_resources =src->responder_resources;
+ dst->initiator_depth = src->initiator_depth;
+ dst->flow_control = src->flow_control;
+ dst->retry_count = src->retry_count;
+ dst->rnr_retry_count = src->rnr_retry_count;
+ dst->srq = src->srq;
+ dst->qp_num = src->qp_num;
+}
+
+static void ucma_copy_ud_event(struct rdma_ucm_ud_param *dst,
+ struct rdma_ud_param *src)
+{
+ if (src->private_data_len)
+ memcpy(dst->private_data, src->private_data,
+ src->private_data_len);
+ dst->private_data_len = src->private_data_len;
+ ib_copy_ah_attr_to_user(&dst->ah_attr, &src->ah_attr);
+ dst->qp_num = src->qp_num;
+ dst->qkey = src->qkey;
+}
+
+static void ucma_set_event_context(struct ucma_context *ctx,
+ struct rdma_cm_event *event,
+ struct ucma_event *uevent)
+{
+ uevent->ctx = ctx;
+ uevent->resp.uid = ctx->uid;
+ uevent->resp.id = ctx->id;
+}
+
+static int ucma_event_handler(struct rdma_cm_id *cm_id,
+ struct rdma_cm_event *event)
+{
+ struct ucma_event *uevent;
+ struct ucma_context *ctx = cm_id->context;
+ int ret = 0;
+
+ uevent = kzalloc(sizeof(*uevent), GFP_KERNEL);
+ if (!uevent)
+ return event->event == RDMA_CM_EVENT_CONNECT_REQUEST;
+
+ uevent->cm_id = cm_id;
+ ucma_set_event_context(ctx, event, uevent);
+ uevent->resp.event = event->event;
+ uevent->resp.status = event->status;
+ if (cm_id->ps == RDMA_PS_UDP)
+ ucma_copy_ud_event(&uevent->resp.param.ud, &event->param.ud);
+ else
+ ucma_copy_conn_event(&uevent->resp.param.conn,
+ &event->param.conn);
+
+ mutex_lock(&ctx->file->mut);
+ if (event->event == RDMA_CM_EVENT_CONNECT_REQUEST) {
+ if (!ctx->backlog) {
+ ret = -EDQUOT;
+ goto out;
+ }
+ ctx->backlog--;
+ }
+ list_add_tail(&uevent->list, &ctx->file->event_list);
+ wake_up_interruptible(&ctx->file->poll_wait);
+out:
+ mutex_unlock(&ctx->file->mut);
+ return ret;
+}
+
+static ssize_t ucma_get_event(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct ucma_context *ctx;
+ struct rdma_ucm_get_event cmd;
+ struct ucma_event *uevent;
+ int ret = 0;
+ DEFINE_WAIT(wait);
+
+ if (out_len < sizeof uevent->resp)
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ mutex_lock(&file->mut);
+ while (list_empty(&file->event_list)) {
+ if (file->filp->f_flags & O_NONBLOCK) {
+ ret = -EAGAIN;
+ break;
+ }
+
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+
+ prepare_to_wait(&file->poll_wait, &wait, TASK_INTERRUPTIBLE);
+ mutex_unlock(&file->mut);
+ schedule();
+ mutex_lock(&file->mut);
+ finish_wait(&file->poll_wait, &wait);
+ }
+
+ if (ret)
+ goto done;
+
+ uevent = list_entry(file->event_list.next, struct ucma_event, list);
+
+ if (uevent->resp.event == RDMA_CM_EVENT_CONNECT_REQUEST) {
+ ctx = ucma_alloc_ctx(file);
+ if (!ctx) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ uevent->ctx->backlog++;
+ ctx->cm_id = uevent->cm_id;
+ ctx->cm_id->context = ctx;
+ uevent->resp.id = ctx->id;
+ }
+
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &uevent->resp, sizeof uevent->resp)) {
+ ret = -EFAULT;
+ goto done;
+ }
+
+ list_del(&uevent->list);
+ uevent->ctx->events_reported++;
+ kfree(uevent);
+done:
+ mutex_unlock(&file->mut);
+ return ret;
+}
+
+static ssize_t ucma_create_id(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_create_id cmd;
+ struct rdma_ucm_create_id_resp resp;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ mutex_lock(&file->mut);
+ ctx = ucma_alloc_ctx(file);
+ mutex_unlock(&file->mut);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->uid = cmd.uid;
+ ctx->cm_id = rdma_create_id(ucma_event_handler, ctx, cmd.ps);
+ if (IS_ERR(ctx->cm_id)) {
+ ret = PTR_ERR(ctx->cm_id);
+ goto err1;
+ }
+
+ resp.id = ctx->id;
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp))) {
+ ret = -EFAULT;
+ goto err2;
+ }
+ return 0;
+
+err2:
+ rdma_destroy_id(ctx->cm_id);
+err1:
+ mutex_lock(&mut);
+ idr_remove(&ctx_idr, ctx->id);
+ mutex_unlock(&mut);
+ kfree(ctx);
+ return ret;
+}
+
+static void ucma_cleanup_events(struct ucma_context *ctx)
+{
+ struct ucma_event *uevent, *tmp;
+
+ list_for_each_entry_safe(uevent, tmp, &ctx->file->event_list, list) {
+ if (uevent->ctx != ctx)
+ continue;
+
+ list_del(&uevent->list);
+
+ /* clear incoming connections. */
+ if (uevent->resp.event == RDMA_CM_EVENT_CONNECT_REQUEST)
+ rdma_destroy_id(uevent->cm_id);
+
+ kfree(uevent);
+ }
+}
+
+static int ucma_free_ctx(struct ucma_context *ctx)
+{
+ int events_reported;
+
+ /* No new events will be generated after destroying the id. */
+ rdma_destroy_id(ctx->cm_id);
+
+ /* Cleanup events not yet reported to the user. */
+ mutex_lock(&ctx->file->mut);
+ ucma_cleanup_events(ctx);
+ list_del(&ctx->list);
+ mutex_unlock(&ctx->file->mut);
+
+ events_reported = ctx->events_reported;
+ kfree(ctx);
+ return events_reported;
+}
+
+static ssize_t ucma_destroy_id(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_destroy_id cmd;
+ struct rdma_ucm_destroy_id_resp resp;
+ struct ucma_context *ctx;
+ int ret = 0;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ mutex_lock(&mut);
+ ctx = _ucma_find_context(cmd.id, file);
+ if (!IS_ERR(ctx))
+ idr_remove(&ctx_idr, ctx->id);
+ mutex_unlock(&mut);
+
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ucma_put_ctx(ctx);
+ wait_for_completion(&ctx->comp);
+ resp.events_reported = ucma_free_ctx(ctx);
+
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp)))
+ ret = -EFAULT;
+
+ return ret;
+}
+
+static ssize_t ucma_bind_addr(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_bind_addr cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_bind_addr(ctx->cm_id, (struct sockaddr *) &cmd.addr);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_resolve_addr(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_resolve_addr cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr,
+ (struct sockaddr *) &cmd.dst_addr,
+ cmd.timeout_ms);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_resolve_route(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_resolve_route cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_resolve_route(ctx->cm_id, cmd.timeout_ms);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static void ucma_copy_ib_route(struct rdma_ucm_query_route_resp *resp,
+ struct rdma_route *route)
+{
+ struct rdma_dev_addr *dev_addr;
+
+ resp->num_paths = route->num_paths;
+ switch (route->num_paths) {
+ case 0:
+ dev_addr = &route->addr.dev_addr;
+ ib_addr_get_dgid(dev_addr,
+ (union ib_gid *) &resp->ib_route[0].dgid);
+ ib_addr_get_sgid(dev_addr,
+ (union ib_gid *) &resp->ib_route[0].sgid);
+ resp->ib_route[0].pkey = cpu_to_be16(ib_addr_get_pkey(dev_addr));
+ break;
+ case 2:
+ ib_copy_path_rec_to_user(&resp->ib_route[1],
+ &route->path_rec[1]);
+ /* fall through */
+ case 1:
+ ib_copy_path_rec_to_user(&resp->ib_route[0],
+ &route->path_rec[0]);
+ break;
+ default:
+ break;
+ }
+}
+
+static ssize_t ucma_query_route(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_query_route cmd;
+ struct rdma_ucm_query_route_resp resp;
+ struct ucma_context *ctx;
+ struct sockaddr *addr;
+ int ret = 0;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ memset(&resp, 0, sizeof resp);
+ addr = &ctx->cm_id->route.addr.src_addr;
+ memcpy(&resp.src_addr, addr, addr->sa_family == AF_INET ?
+ sizeof(struct sockaddr_in) :
+ sizeof(struct sockaddr_in6));
+ addr = &ctx->cm_id->route.addr.dst_addr;
+ memcpy(&resp.dst_addr, addr, addr->sa_family == AF_INET ?
+ sizeof(struct sockaddr_in) :
+ sizeof(struct sockaddr_in6));
+ if (!ctx->cm_id->device)
+ goto out;
+
+ resp.node_guid = ctx->cm_id->device->node_guid;
+ resp.port_num = ctx->cm_id->port_num;
+ switch (rdma_node_get_transport(ctx->cm_id->device->node_type)) {
+ case RDMA_TRANSPORT_IB:
+ ucma_copy_ib_route(&resp, &ctx->cm_id->route);
+ break;
+ default:
+ break;
+ }
+
+out:
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp)))
+ ret = -EFAULT;
+
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static void ucma_copy_conn_param(struct rdma_conn_param *dst,
+ struct rdma_ucm_conn_param *src)
+{
+ dst->private_data = src->private_data;
+ dst->private_data_len = src->private_data_len;
+ dst->responder_resources =src->responder_resources;
+ dst->initiator_depth = src->initiator_depth;
+ dst->flow_control = src->flow_control;
+ dst->retry_count = src->retry_count;
+ dst->rnr_retry_count = src->rnr_retry_count;
+ dst->srq = src->srq;
+ dst->qp_num = src->qp_num;
+}
+
+static ssize_t ucma_connect(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_connect cmd;
+ struct rdma_conn_param conn_param;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ if (!cmd.conn_param.valid)
+ return -EINVAL;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ucma_copy_conn_param(&conn_param, &cmd.conn_param);
+ ret = rdma_connect(ctx->cm_id, &conn_param);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_listen(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_listen cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ctx->backlog = cmd.backlog > 0 && cmd.backlog < UCMA_MAX_BACKLOG ?
+ cmd.backlog : UCMA_MAX_BACKLOG;
+ ret = rdma_listen(ctx->cm_id, ctx->backlog);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_accept(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_accept cmd;
+ struct rdma_conn_param conn_param;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ if (cmd.conn_param.valid) {
+ ctx->uid = cmd.uid;
+ ucma_copy_conn_param(&conn_param, &cmd.conn_param);
+ ret = rdma_accept(ctx->cm_id, &conn_param);
+ } else
+ ret = rdma_accept(ctx->cm_id, NULL);
+
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_reject(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_reject cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_reject(ctx->cm_id, cmd.private_data, cmd.private_data_len);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_disconnect(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_disconnect cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_disconnect(ctx->cm_id);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_init_qp_attr(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_init_qp_attr cmd;
+ struct ib_uverbs_qp_attr resp;
+ struct ucma_context *ctx;
+ struct ib_qp_attr qp_attr;
+ int ret;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ resp.qp_attr_mask = 0;
+ memset(&qp_attr, 0, sizeof qp_attr);
+ qp_attr.qp_state = cmd.qp_state;
+ ret = rdma_init_qp_attr(ctx->cm_id, &qp_attr, &resp.qp_attr_mask);
+ if (ret)
+ goto out;
+
+ ib_copy_qp_attr_to_user(&resp, &qp_attr);
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp)))
+ ret = -EFAULT;
+
+out:
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_notify(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_notify cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_notify(ctx->cm_id, (enum ib_event_type) cmd.event);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t (*ucma_cmd_table[])(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len) = {
+ [RDMA_USER_CM_CMD_CREATE_ID] = ucma_create_id,
+ [RDMA_USER_CM_CMD_DESTROY_ID] = ucma_destroy_id,
+ [RDMA_USER_CM_CMD_BIND_ADDR] = ucma_bind_addr,
+ [RDMA_USER_CM_CMD_RESOLVE_ADDR] = ucma_resolve_addr,
+ [RDMA_USER_CM_CMD_RESOLVE_ROUTE]= ucma_resolve_route,
+ [RDMA_USER_CM_CMD_QUERY_ROUTE] = ucma_query_route,
+ [RDMA_USER_CM_CMD_CONNECT] = ucma_connect,
+ [RDMA_USER_CM_CMD_LISTEN] = ucma_listen,
+ [RDMA_USER_CM_CMD_ACCEPT] = ucma_accept,
+ [RDMA_USER_CM_CMD_REJECT] = ucma_reject,
+ [RDMA_USER_CM_CMD_DISCONNECT] = ucma_disconnect,
+ [RDMA_USER_CM_CMD_INIT_QP_ATTR] = ucma_init_qp_attr,
+ [RDMA_USER_CM_CMD_GET_EVENT] = ucma_get_event,
+ [RDMA_USER_CM_CMD_GET_OPTION] = NULL,
+ [RDMA_USER_CM_CMD_SET_OPTION] = NULL,
+ [RDMA_USER_CM_CMD_NOTIFY] = ucma_notify,
+};
+
+static ssize_t ucma_write(struct file *filp, const char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct ucma_file *file = filp->private_data;
+ struct rdma_ucm_cmd_hdr hdr;
+ ssize_t ret;
+
+ if (len < sizeof(hdr))
+ return -EINVAL;
+
+ if (copy_from_user(&hdr, buf, sizeof(hdr)))
+ return -EFAULT;
+
+ if (hdr.cmd < 0 || hdr.cmd >= ARRAY_SIZE(ucma_cmd_table))
+ return -EINVAL;
+
+ if (hdr.in + sizeof(hdr) > len)
+ return -EINVAL;
+
+ if (!ucma_cmd_table[hdr.cmd])
+ return -ENOSYS;
+
+ ret = ucma_cmd_table[hdr.cmd](file, buf + sizeof(hdr), hdr.in, hdr.out);
+ if (!ret)
+ ret = len;
+
+ return ret;
+}
+
+static unsigned int ucma_poll(struct file *filp, struct poll_table_struct *wait)
+{
+ struct ucma_file *file = filp->private_data;
+ unsigned int mask = 0;
+
+ poll_wait(filp, &file->poll_wait, wait);
+
+ if (!list_empty(&file->event_list))
+ mask = POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+static int ucma_open(struct inode *inode, struct file *filp)
+{
+ struct ucma_file *file;
+
+ file = kmalloc(sizeof *file, GFP_KERNEL);
+ if (!file)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&file->event_list);
+ INIT_LIST_HEAD(&file->ctx_list);
+ init_waitqueue_head(&file->poll_wait);
+ mutex_init(&file->mut);
+
+ filp->private_data = file;
+ file->filp = filp;
+ return 0;
+}
+
+static int ucma_close(struct inode *inode, struct file *filp)
+{
+ struct ucma_file *file = filp->private_data;
+ struct ucma_context *ctx, *tmp;
+
+ mutex_lock(&file->mut);
+ list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) {
+ mutex_unlock(&file->mut);
+
+ mutex_lock(&mut);
+ idr_remove(&ctx_idr, ctx->id);
+ mutex_unlock(&mut);
+
+ ucma_free_ctx(ctx);
+ mutex_lock(&file->mut);
+ }
+ mutex_unlock(&file->mut);
+ kfree(file);
+ return 0;
+}
+
+static struct file_operations ucma_fops = {
+ .owner = THIS_MODULE,
+ .open = ucma_open,
+ .release = ucma_close,
+ .write = ucma_write,
+ .poll = ucma_poll,
+};
+
+static struct miscdevice ucma_misc = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "rdma_cm",
+ .fops = &ucma_fops,
+};
+
+static ssize_t show_abi_version(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", RDMA_USER_CM_ABI_VERSION);
+}
+static DEVICE_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+
+static int __init ucma_init(void)
+{
+ int ret;
+
+ ret = misc_register(&ucma_misc);
+ if (ret)
+ return ret;
+
+ ret = device_create_file(ucma_misc.this_device, &dev_attr_abi_version);
+ if (ret) {
+ printk(KERN_ERR "rdma_ucm: couldn't create abi_version attr\n");
+ goto err;
+ }
+ return 0;
+err:
+ misc_deregister(&ucma_misc);
+ return ret;
+}
+
+static void __exit ucma_cleanup(void)
+{
+ device_remove_file(ucma_misc.this_device, &dev_attr_abi_version);
+ misc_deregister(&ucma_misc);
+ idr_destroy(&ctx_idr);
+}
+
+module_init(ucma_init);
+module_exit(ucma_cleanup);
diff --git a/drivers/infiniband/core/uverbs_marshall.c b/drivers/infiniband/core/uverbs_marshall.c
index ce46b13..5440da0 100644
--- a/drivers/infiniband/core/uverbs_marshall.c
+++ b/drivers/infiniband/core/uverbs_marshall.c
@@ -32,8 +32,8 @@
#include <rdma/ib_marshall.h>
-static void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
- struct ib_ah_attr *src)
+void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
+ struct ib_ah_attr *src)
{
memcpy(dst->grh.dgid, src->grh.dgid.raw, sizeof src->grh.dgid);
dst->grh.flow_label = src->grh.flow_label;
@@ -47,6 +47,7 @@
dst->is_global = src->ah_flags & IB_AH_GRH ? 1 : 0;
dst->port_num = src->port_num;
}
+EXPORT_SYMBOL(ib_copy_ah_attr_to_user);
void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
struct ib_qp_attr *src)
diff --git a/drivers/infiniband/core/uverbs_mem.c b/drivers/infiniband/core/uverbs_mem.c
index db12cc0..c95fe95 100644
--- a/drivers/infiniband/core/uverbs_mem.c
+++ b/drivers/infiniband/core/uverbs_mem.c
@@ -52,8 +52,8 @@
int i;
list_for_each_entry_safe(chunk, tmp, &umem->chunk_list, list) {
- dma_unmap_sg(dev->dma_device, chunk->page_list,
- chunk->nents, DMA_BIDIRECTIONAL);
+ ib_dma_unmap_sg(dev, chunk->page_list,
+ chunk->nents, DMA_BIDIRECTIONAL);
for (i = 0; i < chunk->nents; ++i) {
if (umem->writable && dirty)
set_page_dirty_lock(chunk->page_list[i].page);
@@ -136,10 +136,10 @@
chunk->page_list[i].length = PAGE_SIZE;
}
- chunk->nmap = dma_map_sg(dev->dma_device,
- &chunk->page_list[0],
- chunk->nents,
- DMA_BIDIRECTIONAL);
+ chunk->nmap = ib_dma_map_sg(dev,
+ &chunk->page_list[0],
+ chunk->nents,
+ DMA_BIDIRECTIONAL);
if (chunk->nmap <= 0) {
for (i = 0; i < chunk->nents; ++i)
put_page(chunk->page_list[i].page);
diff --git a/drivers/infiniband/hw/amso1100/c2_qp.c b/drivers/infiniband/hw/amso1100/c2_qp.c
index 179d005..420c138 100644
--- a/drivers/infiniband/hw/amso1100/c2_qp.c
+++ b/drivers/infiniband/hw/amso1100/c2_qp.c
@@ -161,8 +161,10 @@
if (attr_mask & IB_QP_STATE) {
/* Ensure the state is valid */
- if (attr->qp_state < 0 || attr->qp_state > IB_QPS_ERR)
- return -EINVAL;
+ if (attr->qp_state < 0 || attr->qp_state > IB_QPS_ERR) {
+ err = -EINVAL;
+ goto bail0;
+ }
wr.next_qp_state = cpu_to_be32(to_c2_state(attr->qp_state));
@@ -184,9 +186,10 @@
if (attr->cur_qp_state != IB_QPS_RTR &&
attr->cur_qp_state != IB_QPS_RTS &&
attr->cur_qp_state != IB_QPS_SQD &&
- attr->cur_qp_state != IB_QPS_SQE)
- return -EINVAL;
- else
+ attr->cur_qp_state != IB_QPS_SQE) {
+ err = -EINVAL;
+ goto bail0;
+ } else
wr.next_qp_state =
cpu_to_be32(to_c2_state(attr->cur_qp_state));
diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile
index 7dc1055..ec2e603 100644
--- a/drivers/infiniband/hw/ipath/Makefile
+++ b/drivers/infiniband/hw/ipath/Makefile
@@ -6,6 +6,7 @@
ib_ipath-y := \
ipath_cq.o \
ipath_diag.o \
+ ipath_dma.o \
ipath_driver.o \
ipath_eeprom.o \
ipath_file_ops.o \
diff --git a/drivers/infiniband/hw/ipath/ipath_dma.c b/drivers/infiniband/hw/ipath/ipath_dma.c
new file mode 100644
index 0000000..6e0f2b8
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_dma.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2006 QLogic, Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <rdma/ib_verbs.h>
+
+#include "ipath_verbs.h"
+
+#define BAD_DMA_ADDRESS ((u64) 0)
+
+/*
+ * The following functions implement driver specific replacements
+ * for the ib_dma_*() functions.
+ *
+ * These functions return kernel virtual addresses instead of
+ * device bus addresses since the driver uses the CPU to copy
+ * data instead of using hardware DMA.
+ */
+
+static int ipath_mapping_error(struct ib_device *dev, u64 dma_addr)
+{
+ return dma_addr == BAD_DMA_ADDRESS;
+}
+
+static u64 ipath_dma_map_single(struct ib_device *dev,
+ void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+ return (u64) cpu_addr;
+}
+
+static void ipath_dma_unmap_single(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+static u64 ipath_dma_map_page(struct ib_device *dev,
+ struct page *page,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ u64 addr;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ if (offset + size > PAGE_SIZE) {
+ addr = BAD_DMA_ADDRESS;
+ goto done;
+ }
+
+ addr = (u64) page_address(page);
+ if (addr)
+ addr += offset;
+ /* TODO: handle highmem pages */
+
+done:
+ return addr;
+}
+
+static void ipath_dma_unmap_page(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+int ipath_map_sg(struct ib_device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ u64 addr;
+ int i;
+ int ret = nents;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ for (i = 0; i < nents; i++) {
+ addr = (u64) page_address(sg[i].page);
+ /* TODO: handle highmem pages */
+ if (!addr) {
+ ret = 0;
+ break;
+ }
+ }
+ return ret;
+}
+
+static void ipath_unmap_sg(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+static u64 ipath_sg_dma_address(struct ib_device *dev, struct scatterlist *sg)
+{
+ u64 addr = (u64) page_address(sg->page);
+
+ if (addr)
+ addr += sg->offset;
+ return addr;
+}
+
+static unsigned int ipath_sg_dma_len(struct ib_device *dev,
+ struct scatterlist *sg)
+{
+ return sg->length;
+}
+
+static void ipath_sync_single_for_cpu(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+}
+
+static void ipath_sync_single_for_device(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+}
+
+static void *ipath_dma_alloc_coherent(struct ib_device *dev, size_t size,
+ u64 *dma_handle, gfp_t flag)
+{
+ struct page *p;
+ void *addr = NULL;
+
+ p = alloc_pages(flag, get_order(size));
+ if (p)
+ addr = page_address(p);
+ if (dma_handle)
+ *dma_handle = (u64) addr;
+ return addr;
+}
+
+static void ipath_dma_free_coherent(struct ib_device *dev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle)
+{
+ free_pages((unsigned long) cpu_addr, get_order(size));
+}
+
+struct ib_dma_mapping_ops ipath_dma_mapping_ops = {
+ ipath_mapping_error,
+ ipath_dma_map_single,
+ ipath_dma_unmap_single,
+ ipath_dma_map_page,
+ ipath_dma_unmap_page,
+ ipath_map_sg,
+ ipath_unmap_sg,
+ ipath_sg_dma_address,
+ ipath_sg_dma_len,
+ ipath_sync_single_for_cpu,
+ ipath_sync_single_for_device,
+ ipath_dma_alloc_coherent,
+ ipath_dma_free_coherent
+};
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 1aeddb4..ae7f21a 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1825,8 +1825,6 @@
*/
void ipath_shutdown_device(struct ipath_devdata *dd)
{
- u64 val;
-
ipath_dbg("Shutting down the device\n");
dd->ipath_flags |= IPATH_LINKUNK;
@@ -1849,7 +1847,7 @@
*/
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0ULL);
/* flush it */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
/*
* enough for anything that's going to trickle out to have actually
* done so.
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 340f27e..b932bcb 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -699,7 +699,6 @@
int start_stop)
{
struct ipath_devdata *dd = pd->port_dd;
- u64 tval;
ipath_cdbg(PROC, "%sabling rcv for unit %u port %u:%u\n",
start_stop ? "en" : "dis", dd->ipath_unit,
@@ -729,7 +728,7 @@
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
/* now be sure chip saw it before we return */
- tval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
if (start_stop) {
/*
* And try to be sure that tail reg update has happened too.
@@ -738,7 +737,7 @@
* in memory copy, since we could overwrite an update by the
* chip if we did.
*/
- tval = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
+ ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
}
/* always; new head should be equal to new tail; see above */
bail:
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index e57c7a3..7468477 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -1447,7 +1447,7 @@
static int ipath_ht_early_init(struct ipath_devdata *dd)
{
u32 __iomem *piobuf;
- u32 pioincr, val32, egrsize;
+ u32 pioincr, val32;
int i;
/*
@@ -1467,7 +1467,6 @@
* errors interrupts if we ever see one).
*/
dd->ipath_rcvegrbufsize = dd->ipath_piosize2k;
- egrsize = dd->ipath_rcvegrbufsize;
/*
* the min() check here is currently a nop, but it may not
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index 6af8968..ae8bf99 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -602,7 +602,7 @@
*/
static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
{
- u64 val, tmp, config1, prev_val;
+ u64 val, config1, prev_val;
int ret = 0;
ipath_dbg("Trying to bringup serdes\n");
@@ -633,7 +633,7 @@
| INFINIPATH_SERDC0_L1PWR_DN;
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
/* be sure chip saw it */
- tmp = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
udelay(5); /* need pll reset set at least for a bit */
/*
* after PLL is reset, set the per-lane Resets and TxIdle and
@@ -647,7 +647,7 @@
"and txidle (%llx)\n", (unsigned long long) val);
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
/* be sure chip saw it */
- tmp = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
/* need PLL reset clear for at least 11 usec before lane
* resets cleared; give it a few more to be sure */
udelay(15);
@@ -851,12 +851,12 @@
int pos, ret;
dd->ipath_msi_lo = 0; /* used as a flag during reset processing */
- dd->ipath_irq = pdev->irq;
ret = pci_enable_msi(dd->pcidev);
if (ret)
ipath_dev_err(dd, "pci_enable_msi failed: %d, "
"interrupts may not work\n", ret);
/* continue even if it fails, we may still be OK... */
+ dd->ipath_irq = pdev->irq;
if ((pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI))) {
u16 control;
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index d819cca..d4f6b52 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -347,10 +347,9 @@
static int init_chip_reset(struct ipath_devdata *dd,
struct ipath_portdata **pdp)
{
- struct ipath_portdata *pd;
u32 rtmp;
- *pdp = pd = dd->ipath_pd[0];
+ *pdp = dd->ipath_pd[0];
/* ensure chip does no sends or receives while we re-initialize */
dd->ipath_control = dd->ipath_sendctrl = dd->ipath_rcvctrl = 0U;
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, 0);
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 5652a55..72b9e27 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -598,10 +598,9 @@
* on close
*/
if (errs & INFINIPATH_E_RRCVHDRFULL) {
- int any;
u32 hd, tl;
ipath_stats.sps_hdrqfull++;
- for (any = i = 0; i < dd->ipath_cfgports; i++) {
+ for (i = 0; i < dd->ipath_cfgports; i++) {
struct ipath_portdata *pd = dd->ipath_pd[i];
if (i == 0) {
hd = dd->ipath_port0head;
diff --git a/drivers/infiniband/hw/ipath/ipath_keys.c b/drivers/infiniband/hw/ipath/ipath_keys.c
index 9a6cbd0..851763d 100644
--- a/drivers/infiniband/hw/ipath/ipath_keys.c
+++ b/drivers/infiniband/hw/ipath/ipath_keys.c
@@ -134,7 +134,7 @@
*/
if (sge->lkey == 0) {
isge->mr = NULL;
- isge->vaddr = bus_to_virt(sge->addr);
+ isge->vaddr = (void *) sge->addr;
isge->length = sge->length;
isge->sge_length = sge->length;
ret = 1;
@@ -202,12 +202,12 @@
int ret;
/*
- * We use RKEY == zero for physical addresses
- * (see ipath_get_dma_mr).
+ * We use RKEY == zero for kernel virtual addresses
+ * (see ipath_get_dma_mr and ipath_dma.c).
*/
if (rkey == 0) {
sge->mr = NULL;
- sge->vaddr = phys_to_virt(vaddr);
+ sge->vaddr = (void *) vaddr;
sge->length = len;
sge->sge_length = len;
ss->sg_list = NULL;
diff --git a/drivers/infiniband/hw/ipath/ipath_mr.c b/drivers/infiniband/hw/ipath/ipath_mr.c
index a0673c1..8cc8598 100644
--- a/drivers/infiniband/hw/ipath/ipath_mr.c
+++ b/drivers/infiniband/hw/ipath/ipath_mr.c
@@ -54,6 +54,8 @@
* @acc: access flags
*
* Returns the memory region on success, otherwise returns an errno.
+ * Note that all DMA addresses should be created via the
+ * struct ib_dma_mapping_ops functions (see ipath_dma.c).
*/
struct ib_mr *ipath_get_dma_mr(struct ib_pd *pd, int acc)
{
@@ -149,8 +151,7 @@
m = 0;
n = 0;
for (i = 0; i < num_phys_buf; i++) {
- mr->mr.map[m]->segs[n].vaddr =
- phys_to_virt(buffer_list[i].addr);
+ mr->mr.map[m]->segs[n].vaddr = (void *) buffer_list[i].addr;
mr->mr.map[m]->segs[n].length = buffer_list[i].size;
mr->mr.length += buffer_list[i].size;
n++;
@@ -347,7 +348,7 @@
n = 0;
ps = 1 << fmr->page_shift;
for (i = 0; i < list_len; i++) {
- fmr->mr.map[m]->segs[n].vaddr = phys_to_virt(page_list[i]);
+ fmr->mr.map[m]->segs[n].vaddr = (void *) page_list[i];
fmr->mr.map[m]->segs[n].length = ps;
if (++n == IPATH_SEGSZ) {
m++;
diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c
index 182de34..ffa6318 100644
--- a/drivers/infiniband/hw/ipath/ipath_sysfs.c
+++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c
@@ -215,7 +215,6 @@
size_t count)
{
struct ipath_devdata *dd = dev_get_drvdata(dev);
- int unit;
u16 mlid;
int ret;
@@ -223,8 +222,6 @@
if (ret < 0 || mlid < IPATH_MULTICAST_LID_BASE)
goto invalid;
- unit = dd->ipath_unit;
-
dd->ipath_mlid = mlid;
goto bail;
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index acdee33..2aaacdb 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -1599,6 +1599,7 @@
dev->detach_mcast = ipath_multicast_detach;
dev->process_mad = ipath_process_mad;
dev->mmap = ipath_mmap;
+ dev->dma_ops = &ipath_dma_mapping_ops;
snprintf(dev->node_desc, sizeof(dev->node_desc),
IPATH_IDSTR " %s", init_utsname()->nodename);
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h
index 8039f6e..c0c8d5b 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.h
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.h
@@ -812,4 +812,6 @@
extern const u32 ib_ipath_rnr_table[];
+extern struct ib_dma_mapping_ops ipath_dma_mapping_ops;
+
#endif /* IPATH_VERBS_H */
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 9954799..07deee8 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -105,12 +105,12 @@
struct ipoib_rx_buf {
struct sk_buff *skb;
- dma_addr_t mapping;
+ u64 mapping;
};
struct ipoib_tx_buf {
struct sk_buff *skb;
- DECLARE_PCI_UNMAP_ADDR(mapping)
+ u64 mapping;
};
/*
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index f10fba5..59d9594 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -109,9 +109,8 @@
ret = ib_post_recv(priv->qp, ¶m, &bad_wr);
if (unlikely(ret)) {
ipoib_warn(priv, "receive failed for buf %d (%d)\n", id, ret);
- dma_unmap_single(priv->ca->dma_device,
- priv->rx_ring[id].mapping,
- IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
+ ib_dma_unmap_single(priv->ca, priv->rx_ring[id].mapping,
+ IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
dev_kfree_skb_any(priv->rx_ring[id].skb);
priv->rx_ring[id].skb = NULL;
}
@@ -123,7 +122,7 @@
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct sk_buff *skb;
- dma_addr_t addr;
+ u64 addr;
skb = dev_alloc_skb(IPOIB_BUF_SIZE + 4);
if (!skb)
@@ -136,10 +135,9 @@
*/
skb_reserve(skb, 4);
- addr = dma_map_single(priv->ca->dma_device,
- skb->data, IPOIB_BUF_SIZE,
- DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(addr))) {
+ addr = ib_dma_map_single(priv->ca, skb->data, IPOIB_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ if (unlikely(ib_dma_mapping_error(priv->ca, addr))) {
dev_kfree_skb_any(skb);
return -EIO;
}
@@ -174,7 +172,7 @@
struct ipoib_dev_priv *priv = netdev_priv(dev);
unsigned int wr_id = wc->wr_id & ~IPOIB_OP_RECV;
struct sk_buff *skb;
- dma_addr_t addr;
+ u64 addr;
ipoib_dbg_data(priv, "recv completion: id %d, op %d, status: %d\n",
wr_id, wc->opcode, wc->status);
@@ -193,8 +191,8 @@
ipoib_warn(priv, "failed recv event "
"(status=%d, wrid=%d vend_err %x)\n",
wc->status, wr_id, wc->vendor_err);
- dma_unmap_single(priv->ca->dma_device, addr,
- IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
+ ib_dma_unmap_single(priv->ca, addr,
+ IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
priv->rx_ring[wr_id].skb = NULL;
return;
@@ -212,8 +210,7 @@
ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n",
wc->byte_len, wc->slid);
- dma_unmap_single(priv->ca->dma_device, addr,
- IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
+ ib_dma_unmap_single(priv->ca, addr, IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
skb_put(skb, wc->byte_len);
skb_pull(skb, IB_GRH_BYTES);
@@ -261,10 +258,8 @@
tx_req = &priv->tx_ring[wr_id];
- dma_unmap_single(priv->ca->dma_device,
- pci_unmap_addr(tx_req, mapping),
- tx_req->skb->len,
- DMA_TO_DEVICE);
+ ib_dma_unmap_single(priv->ca, tx_req->mapping,
+ tx_req->skb->len, DMA_TO_DEVICE);
++priv->stats.tx_packets;
priv->stats.tx_bytes += tx_req->skb->len;
@@ -311,7 +306,7 @@
static inline int post_send(struct ipoib_dev_priv *priv,
unsigned int wr_id,
struct ib_ah *address, u32 qpn,
- dma_addr_t addr, int len)
+ u64 addr, int len)
{
struct ib_send_wr *bad_wr;
@@ -330,7 +325,7 @@
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_tx_buf *tx_req;
- dma_addr_t addr;
+ u64 addr;
if (unlikely(skb->len > dev->mtu + INFINIBAND_ALEN)) {
ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
@@ -353,21 +348,20 @@
*/
tx_req = &priv->tx_ring[priv->tx_head & (ipoib_sendq_size - 1)];
tx_req->skb = skb;
- addr = dma_map_single(priv->ca->dma_device, skb->data, skb->len,
- DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(addr))) {
+ addr = ib_dma_map_single(priv->ca, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ if (unlikely(ib_dma_mapping_error(priv->ca, addr))) {
++priv->stats.tx_errors;
dev_kfree_skb_any(skb);
return;
}
- pci_unmap_addr_set(tx_req, mapping, addr);
+ tx_req->mapping = addr;
if (unlikely(post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
address->ah, qpn, addr, skb->len))) {
ipoib_warn(priv, "post_send failed\n");
++priv->stats.tx_errors;
- dma_unmap_single(priv->ca->dma_device, addr, skb->len,
- DMA_TO_DEVICE);
+ ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE);
dev_kfree_skb_any(skb);
} else {
dev->trans_start = jiffies;
@@ -538,24 +532,27 @@
while ((int) priv->tx_tail - (int) priv->tx_head < 0) {
tx_req = &priv->tx_ring[priv->tx_tail &
(ipoib_sendq_size - 1)];
- dma_unmap_single(priv->ca->dma_device,
- pci_unmap_addr(tx_req, mapping),
- tx_req->skb->len,
- DMA_TO_DEVICE);
+ ib_dma_unmap_single(priv->ca,
+ tx_req->mapping,
+ tx_req->skb->len,
+ DMA_TO_DEVICE);
dev_kfree_skb_any(tx_req->skb);
++priv->tx_tail;
}
- for (i = 0; i < ipoib_recvq_size; ++i)
- if (priv->rx_ring[i].skb) {
- dma_unmap_single(priv->ca->dma_device,
- pci_unmap_addr(&priv->rx_ring[i],
- mapping),
- IPOIB_BUF_SIZE,
- DMA_FROM_DEVICE);
- dev_kfree_skb_any(priv->rx_ring[i].skb);
- priv->rx_ring[i].skb = NULL;
- }
+ for (i = 0; i < ipoib_recvq_size; ++i) {
+ struct ipoib_rx_buf *rx_req;
+
+ rx_req = &priv->rx_ring[i];
+ if (!rx_req->skb)
+ continue;
+ ib_dma_unmap_single(priv->ca,
+ rx_req->mapping,
+ IPOIB_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb_any(rx_req->skb);
+ rx_req->skb = NULL;
+ }
goto timeout;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index c092802..705eb1d 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -497,8 +497,6 @@
return;
}
- skb_queue_head_init(&neigh->queue);
-
/*
* We can only be called from ipoib_start_xmit, so we're
* inside tx_lock -- no need to save/restore flags.
@@ -806,6 +804,7 @@
neigh->neighbour = neighbour;
*to_ipoib_neigh(neighbour) = neigh;
+ skb_queue_head_init(&neigh->queue);
return neigh;
}
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h
index 234e5b0..cae8c96 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -182,7 +182,7 @@
struct iser_mem_reg reg; /* memory registration info */
void *virt_addr;
struct iser_device *device; /* device->device for dma_unmap */
- dma_addr_t dma_addr; /* if non zero, addr for dma_unmap */
+ u64 dma_addr; /* if non zero, addr for dma_unmap */
enum dma_data_direction direction; /* direction for dma_unmap */
unsigned int data_size;
atomic_t ref_count; /* refcount, freed when dec to 0 */
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 9b3d79c..e73c87b 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -487,10 +487,8 @@
struct iscsi_iser_conn *iser_conn = conn->dd_data;
struct iser_desc *mdesc = mtask->dd_data;
struct iser_dto *send_dto = NULL;
- unsigned int itt;
unsigned long data_seg_len;
int err = 0;
- unsigned char opcode;
struct iser_regd_buf *regd_buf;
struct iser_device *device;
@@ -512,8 +510,6 @@
iser_reg_single(device, send_dto->regd[0], DMA_TO_DEVICE);
- itt = ntohl(mtask->hdr->itt);
- opcode = mtask->hdr->opcode & ISCSI_OPCODE_MASK;
data_seg_len = ntoh24(mtask->hdr->dlength);
if (data_seg_len > 0) {
diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c
index 3aedd59..fc9f1fd 100644
--- a/drivers/infiniband/ulp/iser/iser_memory.c
+++ b/drivers/infiniband/ulp/iser/iser_memory.c
@@ -52,7 +52,7 @@
*/
int iser_regd_buff_release(struct iser_regd_buf *regd_buf)
{
- struct device *dma_device;
+ struct ib_device *dev;
if ((atomic_read(®d_buf->ref_count) == 0) ||
atomic_dec_and_test(®d_buf->ref_count)) {
@@ -61,8 +61,8 @@
iser_unreg_mem(®d_buf->reg);
if (regd_buf->dma_addr) {
- dma_device = regd_buf->device->ib_device->dma_device;
- dma_unmap_single(dma_device,
+ dev = regd_buf->device->ib_device;
+ ib_dma_unmap_single(dev,
regd_buf->dma_addr,
regd_buf->data_size,
regd_buf->direction);
@@ -84,12 +84,12 @@
struct iser_regd_buf *regd_buf,
enum dma_data_direction direction)
{
- dma_addr_t dma_addr;
+ u64 dma_addr;
- dma_addr = dma_map_single(device->ib_device->dma_device,
- regd_buf->virt_addr,
- regd_buf->data_size, direction);
- BUG_ON(dma_mapping_error(dma_addr));
+ dma_addr = ib_dma_map_single(device->ib_device,
+ regd_buf->virt_addr,
+ regd_buf->data_size, direction);
+ BUG_ON(ib_dma_mapping_error(device->ib_device, dma_addr));
regd_buf->reg.lkey = device->mr->lkey;
regd_buf->reg.len = regd_buf->data_size;
@@ -107,7 +107,7 @@
enum iser_data_dir cmd_dir)
{
int dma_nents;
- struct device *dma_device;
+ struct ib_device *dev;
char *mem = NULL;
struct iser_data_buf *data = &iser_ctask->data[cmd_dir];
unsigned long cmd_data_len = data->data_len;
@@ -147,17 +147,12 @@
iser_ctask->data_copy[cmd_dir].copy_buf = mem;
- dma_device = iser_ctask->iser_conn->ib_conn->device->ib_device->dma_device;
-
- if (cmd_dir == ISER_DIR_OUT)
- dma_nents = dma_map_sg(dma_device,
- &iser_ctask->data_copy[cmd_dir].sg_single,
- 1, DMA_TO_DEVICE);
- else
- dma_nents = dma_map_sg(dma_device,
- &iser_ctask->data_copy[cmd_dir].sg_single,
- 1, DMA_FROM_DEVICE);
-
+ dev = iser_ctask->iser_conn->ib_conn->device->ib_device;
+ dma_nents = ib_dma_map_sg(dev,
+ &iser_ctask->data_copy[cmd_dir].sg_single,
+ 1,
+ (cmd_dir == ISER_DIR_OUT) ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE);
BUG_ON(dma_nents == 0);
iser_ctask->data_copy[cmd_dir].dma_nents = dma_nents;
@@ -170,19 +165,16 @@
void iser_finalize_rdma_unaligned_sg(struct iscsi_iser_cmd_task *iser_ctask,
enum iser_data_dir cmd_dir)
{
- struct device *dma_device;
+ struct ib_device *dev;
struct iser_data_buf *mem_copy;
unsigned long cmd_data_len;
- dma_device = iser_ctask->iser_conn->ib_conn->device->ib_device->dma_device;
- mem_copy = &iser_ctask->data_copy[cmd_dir];
+ dev = iser_ctask->iser_conn->ib_conn->device->ib_device;
+ mem_copy = &iser_ctask->data_copy[cmd_dir];
- if (cmd_dir == ISER_DIR_OUT)
- dma_unmap_sg(dma_device, &mem_copy->sg_single, 1,
- DMA_TO_DEVICE);
- else
- dma_unmap_sg(dma_device, &mem_copy->sg_single, 1,
- DMA_FROM_DEVICE);
+ ib_dma_unmap_sg(dev, &mem_copy->sg_single, 1,
+ (cmd_dir == ISER_DIR_OUT) ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE);
if (cmd_dir == ISER_DIR_IN) {
char *mem;
@@ -231,11 +223,12 @@
* consecutive elements. Also, it handles one entry SG.
*/
static int iser_sg_to_page_vec(struct iser_data_buf *data,
- struct iser_page_vec *page_vec)
+ struct iser_page_vec *page_vec,
+ struct ib_device *ibdev)
{
struct scatterlist *sg = (struct scatterlist *)data->buf;
- dma_addr_t first_addr, last_addr, page;
- int start_aligned, end_aligned;
+ u64 first_addr, last_addr, page;
+ int end_aligned;
unsigned int cur_page = 0;
unsigned long total_sz = 0;
int i;
@@ -244,19 +237,21 @@
page_vec->offset = (u64) sg[0].offset & ~MASK_4K;
for (i = 0; i < data->dma_nents; i++) {
- total_sz += sg_dma_len(&sg[i]);
+ unsigned int dma_len = ib_sg_dma_len(ibdev, &sg[i]);
- first_addr = sg_dma_address(&sg[i]);
- last_addr = first_addr + sg_dma_len(&sg[i]);
+ total_sz += dma_len;
- start_aligned = !(first_addr & ~MASK_4K);
+ first_addr = ib_sg_dma_address(ibdev, &sg[i]);
+ last_addr = first_addr + dma_len;
+
end_aligned = !(last_addr & ~MASK_4K);
/* continue to collect page fragments till aligned or SG ends */
while (!end_aligned && (i + 1 < data->dma_nents)) {
i++;
- total_sz += sg_dma_len(&sg[i]);
- last_addr = sg_dma_address(&sg[i]) + sg_dma_len(&sg[i]);
+ dma_len = ib_sg_dma_len(ibdev, &sg[i]);
+ total_sz += dma_len;
+ last_addr = ib_sg_dma_address(ibdev, &sg[i]) + dma_len;
end_aligned = !(last_addr & ~MASK_4K);
}
@@ -288,10 +283,11 @@
* the number of entries which are aligned correctly. Supports the case where
* consecutive SG elements are actually fragments of the same physcial page.
*/
-static unsigned int iser_data_buf_aligned_len(struct iser_data_buf *data)
+static unsigned int iser_data_buf_aligned_len(struct iser_data_buf *data,
+ struct ib_device *ibdev)
{
struct scatterlist *sg;
- dma_addr_t end_addr, next_addr;
+ u64 end_addr, next_addr;
int i, cnt;
unsigned int ret_len = 0;
@@ -303,12 +299,12 @@
(unsigned long)page_to_phys(sg[i].page),
(unsigned long)sg[i].offset,
(unsigned long)sg[i].length); */
- end_addr = sg_dma_address(&sg[i]) +
- sg_dma_len(&sg[i]);
+ end_addr = ib_sg_dma_address(ibdev, &sg[i]) +
+ ib_sg_dma_len(ibdev, &sg[i]);
/* iser_dbg("Checking sg iobuf end address "
"0x%08lX\n", end_addr); */
if (i + 1 < data->dma_nents) {
- next_addr = sg_dma_address(&sg[i+1]);
+ next_addr = ib_sg_dma_address(ibdev, &sg[i+1]);
/* are i, i+1 fragments of the same page? */
if (end_addr == next_addr)
continue;
@@ -325,7 +321,8 @@
return ret_len;
}
-static void iser_data_buf_dump(struct iser_data_buf *data)
+static void iser_data_buf_dump(struct iser_data_buf *data,
+ struct ib_device *ibdev)
{
struct scatterlist *sg = (struct scatterlist *)data->buf;
int i;
@@ -333,9 +330,9 @@
for (i = 0; i < data->dma_nents; i++)
iser_err("sg[%d] dma_addr:0x%lX page:0x%p "
"off:0x%x sz:0x%x dma_len:0x%x\n",
- i, (unsigned long)sg_dma_address(&sg[i]),
+ i, (unsigned long)ib_sg_dma_address(ibdev, &sg[i]),
sg[i].page, sg[i].offset,
- sg[i].length,sg_dma_len(&sg[i]));
+ sg[i].length, ib_sg_dma_len(ibdev, &sg[i]));
}
static void iser_dump_page_vec(struct iser_page_vec *page_vec)
@@ -349,7 +346,8 @@
}
static void iser_page_vec_build(struct iser_data_buf *data,
- struct iser_page_vec *page_vec)
+ struct iser_page_vec *page_vec,
+ struct ib_device *ibdev)
{
int page_vec_len = 0;
@@ -357,14 +355,14 @@
page_vec->offset = 0;
iser_dbg("Translating sg sz: %d\n", data->dma_nents);
- page_vec_len = iser_sg_to_page_vec(data,page_vec);
+ page_vec_len = iser_sg_to_page_vec(data, page_vec, ibdev);
iser_dbg("sg len %d page_vec_len %d\n", data->dma_nents,page_vec_len);
page_vec->length = page_vec_len;
if (page_vec_len * SIZE_4K < page_vec->data_size) {
iser_err("page_vec too short to hold this SG\n");
- iser_data_buf_dump(data);
+ iser_data_buf_dump(data, ibdev);
iser_dump_page_vec(page_vec);
BUG();
}
@@ -375,13 +373,12 @@
enum iser_data_dir iser_dir,
enum dma_data_direction dma_dir)
{
- struct device *dma_device;
+ struct ib_device *dev;
iser_ctask->dir[iser_dir] = 1;
- dma_device =
- iser_ctask->iser_conn->ib_conn->device->ib_device->dma_device;
+ dev = iser_ctask->iser_conn->ib_conn->device->ib_device;
- data->dma_nents = dma_map_sg(dma_device, data->buf, data->size, dma_dir);
+ data->dma_nents = ib_dma_map_sg(dev, data->buf, data->size, dma_dir);
if (data->dma_nents == 0) {
iser_err("dma_map_sg failed!!!\n");
return -EINVAL;
@@ -391,20 +388,19 @@
void iser_dma_unmap_task_data(struct iscsi_iser_cmd_task *iser_ctask)
{
- struct device *dma_device;
+ struct ib_device *dev;
struct iser_data_buf *data;
- dma_device =
- iser_ctask->iser_conn->ib_conn->device->ib_device->dma_device;
+ dev = iser_ctask->iser_conn->ib_conn->device->ib_device;
if (iser_ctask->dir[ISER_DIR_IN]) {
data = &iser_ctask->data[ISER_DIR_IN];
- dma_unmap_sg(dma_device, data->buf, data->size, DMA_FROM_DEVICE);
+ ib_dma_unmap_sg(dev, data->buf, data->size, DMA_FROM_DEVICE);
}
if (iser_ctask->dir[ISER_DIR_OUT]) {
data = &iser_ctask->data[ISER_DIR_OUT];
- dma_unmap_sg(dma_device, data->buf, data->size, DMA_TO_DEVICE);
+ ib_dma_unmap_sg(dev, data->buf, data->size, DMA_TO_DEVICE);
}
}
@@ -419,6 +415,7 @@
{
struct iser_conn *ib_conn = iser_ctask->iser_conn->ib_conn;
struct iser_device *device = ib_conn->device;
+ struct ib_device *ibdev = device->ib_device;
struct iser_data_buf *mem = &iser_ctask->data[cmd_dir];
struct iser_regd_buf *regd_buf;
int aligned_len;
@@ -428,11 +425,11 @@
regd_buf = &iser_ctask->rdma_regd[cmd_dir];
- aligned_len = iser_data_buf_aligned_len(mem);
+ aligned_len = iser_data_buf_aligned_len(mem, ibdev);
if (aligned_len != mem->dma_nents) {
iser_err("rdma alignment violation %d/%d aligned\n",
aligned_len, mem->size);
- iser_data_buf_dump(mem);
+ iser_data_buf_dump(mem, ibdev);
/* unmap the command data before accessing it */
iser_dma_unmap_task_data(iser_ctask);
@@ -450,8 +447,8 @@
regd_buf->reg.lkey = device->mr->lkey;
regd_buf->reg.rkey = device->mr->rkey;
- regd_buf->reg.len = sg_dma_len(&sg[0]);
- regd_buf->reg.va = sg_dma_address(&sg[0]);
+ regd_buf->reg.len = ib_sg_dma_len(ibdev, &sg[0]);
+ regd_buf->reg.va = ib_sg_dma_address(ibdev, &sg[0]);
regd_buf->reg.is_fmr = 0;
iser_dbg("PHYSICAL Mem.register: lkey: 0x%08X rkey: 0x%08X "
@@ -461,10 +458,10 @@
(unsigned long)regd_buf->reg.va,
(unsigned long)regd_buf->reg.len);
} else { /* use FMR for multiple dma entries */
- iser_page_vec_build(mem, ib_conn->page_vec);
+ iser_page_vec_build(mem, ib_conn->page_vec, ibdev);
err = iser_reg_page_vec(ib_conn, ib_conn->page_vec, ®d_buf->reg);
if (err) {
- iser_data_buf_dump(mem);
+ iser_data_buf_dump(mem, ibdev);
iser_err("mem->dma_nents = %d (dlength = 0x%x)\n", mem->dma_nents,
ntoh24(iser_ctask->desc.iscsi_header.dlength));
iser_err("page_vec: data_size = 0x%x, length = %d, offset = 0x%x\n",
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index a628959..e9b6a6f 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -122,9 +122,8 @@
if (!iu->buf)
goto out_free_iu;
- iu->dma = dma_map_single(host->dev->dev->dma_device,
- iu->buf, size, direction);
- if (dma_mapping_error(iu->dma))
+ iu->dma = ib_dma_map_single(host->dev->dev, iu->buf, size, direction);
+ if (ib_dma_mapping_error(host->dev->dev, iu->dma))
goto out_free_buf;
iu->size = size;
@@ -145,8 +144,7 @@
if (!iu)
return;
- dma_unmap_single(host->dev->dev->dma_device,
- iu->dma, iu->size, iu->direction);
+ ib_dma_unmap_single(host->dev->dev, iu->dma, iu->size, iu->direction);
kfree(iu->buf);
kfree(iu);
}
@@ -482,8 +480,8 @@
scat = &req->fake_sg;
}
- dma_unmap_sg(target->srp_host->dev->dev->dma_device, scat, nents,
- scmnd->sc_data_direction);
+ ib_dma_unmap_sg(target->srp_host->dev->dev, scat, nents,
+ scmnd->sc_data_direction);
}
static void srp_remove_req(struct srp_target_port *target, struct srp_request *req)
@@ -595,23 +593,26 @@
int i, j;
int ret;
struct srp_device *dev = target->srp_host->dev;
+ struct ib_device *ibdev = dev->dev;
if (!dev->fmr_pool)
return -ENODEV;
- if ((sg_dma_address(&scat[0]) & ~dev->fmr_page_mask) &&
+ if ((ib_sg_dma_address(ibdev, &scat[0]) & ~dev->fmr_page_mask) &&
mellanox_workarounds && !memcmp(&target->ioc_guid, mellanox_oui, 3))
return -EINVAL;
len = page_cnt = 0;
for (i = 0; i < sg_cnt; ++i) {
- if (sg_dma_address(&scat[i]) & ~dev->fmr_page_mask) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+
+ if (ib_sg_dma_address(ibdev, &scat[i]) & ~dev->fmr_page_mask) {
if (i > 0)
return -EINVAL;
else
++page_cnt;
}
- if ((sg_dma_address(&scat[i]) + sg_dma_len(&scat[i])) &
+ if ((ib_sg_dma_address(ibdev, &scat[i]) + dma_len) &
~dev->fmr_page_mask) {
if (i < sg_cnt - 1)
return -EINVAL;
@@ -619,7 +620,7 @@
++page_cnt;
}
- len += sg_dma_len(&scat[i]);
+ len += dma_len;
}
page_cnt += len >> dev->fmr_page_shift;
@@ -631,10 +632,14 @@
return -ENOMEM;
page_cnt = 0;
- for (i = 0; i < sg_cnt; ++i)
- for (j = 0; j < sg_dma_len(&scat[i]); j += dev->fmr_page_size)
+ for (i = 0; i < sg_cnt; ++i) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+
+ for (j = 0; j < dma_len; j += dev->fmr_page_size)
dma_pages[page_cnt++] =
- (sg_dma_address(&scat[i]) & dev->fmr_page_mask) + j;
+ (ib_sg_dma_address(ibdev, &scat[i]) &
+ dev->fmr_page_mask) + j;
+ }
req->fmr = ib_fmr_pool_map_phys(dev->fmr_pool,
dma_pages, page_cnt, io_addr);
@@ -644,7 +649,8 @@
goto out;
}
- buf->va = cpu_to_be64(sg_dma_address(&scat[0]) & ~dev->fmr_page_mask);
+ buf->va = cpu_to_be64(ib_sg_dma_address(ibdev, &scat[0]) &
+ ~dev->fmr_page_mask);
buf->key = cpu_to_be32(req->fmr->fmr->rkey);
buf->len = cpu_to_be32(len);
@@ -663,6 +669,8 @@
struct srp_cmd *cmd = req->cmd->buf;
int len, nents, count;
u8 fmt = SRP_DATA_DESC_DIRECT;
+ struct srp_device *dev;
+ struct ib_device *ibdev;
if (!scmnd->request_buffer || scmnd->sc_data_direction == DMA_NONE)
return sizeof (struct srp_cmd);
@@ -687,8 +695,10 @@
sg_init_one(scat, scmnd->request_buffer, scmnd->request_bufflen);
}
- count = dma_map_sg(target->srp_host->dev->dev->dma_device,
- scat, nents, scmnd->sc_data_direction);
+ dev = target->srp_host->dev;
+ ibdev = dev->dev;
+
+ count = ib_dma_map_sg(ibdev, scat, nents, scmnd->sc_data_direction);
fmt = SRP_DATA_DESC_DIRECT;
len = sizeof (struct srp_cmd) + sizeof (struct srp_direct_buf);
@@ -702,9 +712,9 @@
*/
struct srp_direct_buf *buf = (void *) cmd->add_data;
- buf->va = cpu_to_be64(sg_dma_address(scat));
- buf->key = cpu_to_be32(target->srp_host->dev->mr->rkey);
- buf->len = cpu_to_be32(sg_dma_len(scat));
+ buf->va = cpu_to_be64(ib_sg_dma_address(ibdev, scat));
+ buf->key = cpu_to_be32(dev->mr->rkey);
+ buf->len = cpu_to_be32(ib_sg_dma_len(ibdev, scat));
} else if (srp_map_fmr(target, scat, count, req,
(void *) cmd->add_data)) {
/*
@@ -722,13 +732,14 @@
count * sizeof (struct srp_direct_buf);
for (i = 0; i < count; ++i) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+
buf->desc_list[i].va =
- cpu_to_be64(sg_dma_address(&scat[i]));
+ cpu_to_be64(ib_sg_dma_address(ibdev, &scat[i]));
buf->desc_list[i].key =
- cpu_to_be32(target->srp_host->dev->mr->rkey);
- buf->desc_list[i].len =
- cpu_to_be32(sg_dma_len(&scat[i]));
- datalen += sg_dma_len(&scat[i]);
+ cpu_to_be32(dev->mr->rkey);
+ buf->desc_list[i].len = cpu_to_be32(dma_len);
+ datalen += dma_len;
}
if (scmnd->sc_data_direction == DMA_TO_DEVICE)
@@ -808,13 +819,15 @@
static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc)
{
+ struct ib_device *dev;
struct srp_iu *iu;
u8 opcode;
iu = target->rx_ring[wc->wr_id & ~SRP_OP_RECV];
- dma_sync_single_for_cpu(target->srp_host->dev->dev->dma_device, iu->dma,
- target->max_ti_iu_len, DMA_FROM_DEVICE);
+ dev = target->srp_host->dev->dev;
+ ib_dma_sync_single_for_cpu(dev, iu->dma, target->max_ti_iu_len,
+ DMA_FROM_DEVICE);
opcode = *(u8 *) iu->buf;
@@ -850,8 +863,8 @@
break;
}
- dma_sync_single_for_device(target->srp_host->dev->dev->dma_device, iu->dma,
- target->max_ti_iu_len, DMA_FROM_DEVICE);
+ ib_dma_sync_single_for_device(dev, iu->dma, target->max_ti_iu_len,
+ DMA_FROM_DEVICE);
}
static void srp_completion(struct ib_cq *cq, void *target_ptr)
@@ -969,6 +982,7 @@
struct srp_request *req;
struct srp_iu *iu;
struct srp_cmd *cmd;
+ struct ib_device *dev;
int len;
if (target->state == SRP_TARGET_CONNECTING)
@@ -985,8 +999,9 @@
if (!iu)
goto err;
- dma_sync_single_for_cpu(target->srp_host->dev->dev->dma_device, iu->dma,
- srp_max_iu_len, DMA_TO_DEVICE);
+ dev = target->srp_host->dev->dev;
+ ib_dma_sync_single_for_cpu(dev, iu->dma, srp_max_iu_len,
+ DMA_TO_DEVICE);
req = list_entry(target->free_reqs.next, struct srp_request, list);
@@ -1018,8 +1033,8 @@
goto err_unmap;
}
- dma_sync_single_for_device(target->srp_host->dev->dev->dma_device, iu->dma,
- srp_max_iu_len, DMA_TO_DEVICE);
+ ib_dma_sync_single_for_device(dev, iu->dma, srp_max_iu_len,
+ DMA_TO_DEVICE);
if (__srp_post_send(target, iu, len)) {
printk(KERN_ERR PFX "Send failed\n");
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index d4e35ef..868a540 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -161,7 +161,7 @@
};
struct srp_iu {
- dma_addr_t dma;
+ u64 dma;
void *buf;
size_t size;
enum dma_data_direction direction;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 3d5f196..6b46c9b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -146,7 +146,7 @@
config TOUCHSCREEN_UCB1400
tristate "Philips UCB1400 touchscreen"
- depends on SND_AC97_BUS
+ select AC97_BUS
help
This enables support for the Philips UCB1400 touchscreen interface.
The UCB1400 is an AC97 audio codec. The touchscreen interface
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 176142c..7399ba7 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -12,7 +12,7 @@
config LEDS_CLASS
tristate "LED Class Support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
@@ -21,28 +21,28 @@
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
- depends LEDS_CLASS && PXA_SHARP_C7xx
+ depends on LEDS_CLASS && PXA_SHARP_C7xx
help
This option enables support for the LEDs on Sharp Zaurus
SL-C7x0 series (C700, C750, C760, C860).
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
- depends LEDS_CLASS && SHARP_LOCOMO
+ depends on LEDS_CLASS && SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_SPITZ
tristate "LED Support for the Sharp SL-Cxx00 series"
- depends LEDS_CLASS && PXA_SHARP_Cxx00
+ depends on LEDS_CLASS && PXA_SHARP_Cxx00
help
This option enables support for the LEDs on Sharp Zaurus
SL-Cxx00 series (C1000, C3000, C3100).
config LEDS_IXP4XX
tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
- depends LEDS_CLASS && ARCH_IXP4XX
+ depends on LEDS_CLASS && ARCH_IXP4XX
help
This option enables support for the LEDs connected to GPIO
outputs of the Intel IXP4XX processors. To be useful the
@@ -51,7 +51,7 @@
config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series"
- depends LEDS_CLASS && PXA_SHARPSL
+ depends on LEDS_CLASS && PXA_SHARPSL
help
This option enables support for the LEDs on Sharp Zaurus
SL-6000 series.
@@ -65,7 +65,7 @@
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
- depends LEDS_CLASS && MACH_AMS_DELTA
+ depends on LEDS_CLASS && MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
@@ -86,7 +86,7 @@
config LEDS_TRIGGERS
bool "LED Trigger support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
@@ -94,21 +94,21 @@
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. If unsure, say Y.
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+ depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 8e4ce10..ffda71d 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -650,7 +650,7 @@
/* dvb */
ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE, &pdev->dev);
if (ret < 0)
- goto err_i2c_bit_del_bus;
+ goto err_i2c_del_adapter;
dvb_adapter = &pluto->dvb_adapter;
@@ -712,8 +712,8 @@
dvb_dmx_release(dvbdemux);
err_dvb_unregister_adapter:
dvb_unregister_adapter(dvb_adapter);
-err_i2c_bit_del_bus:
- i2c_bit_del_bus(&pluto->i2c_adap);
+err_i2c_del_adapter:
+ i2c_del_adapter(&pluto->i2c_adap);
err_pluto_hw_exit:
pluto_hw_exit(pluto);
err_free_irq:
@@ -748,7 +748,7 @@
dvb_dmxdev_release(&pluto->dmxdev);
dvb_dmx_release(dvbdemux);
dvb_unregister_adapter(dvb_adapter);
- i2c_bit_del_bus(&pluto->i2c_adap);
+ i2c_del_adapter(&pluto->i2c_adap);
pluto_hw_exit(pluto);
free_irq(pdev->irq, pluto);
pci_iounmap(pdev, pluto->io_mem);
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 70de6c9..62b8730 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -479,11 +479,7 @@
if (0 != btv->i2c_rc)
return 0;
- if (btv->use_i2c_hw) {
- return i2c_del_adapter(&btv->c.i2c_adap);
- } else {
- return i2c_bit_del_bus(&btv->c.i2c_adap);
- }
+ return i2c_del_adapter(&btv->c.i2c_adap);
}
/*
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 4b655f2..453af5e 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -1153,7 +1153,7 @@
mutex_lock(&devlist);
cx88_ir_fini(core);
if (0 == core->i2c_rc)
- i2c_bit_del_bus(&core->i2c_adap);
+ i2c_del_adapter(&core->i2c_adap);
list_del(&core->devlist);
iounmap(core->lmmio);
cx88_devcount--;
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c
index 2b4f197..6068c9b 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.c
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c
@@ -168,7 +168,7 @@
dev->core->board != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
return;
- i2c_bit_del_bus(&vp3054_i2c->adap);
+ i2c_del_adapter(&vp3054_i2c->adap);
kfree(vp3054_i2c);
}
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c
index 89dd18c3..5ed0adc 100644
--- a/drivers/media/video/ov7670.c
+++ b/drivers/media/video/ov7670.c
@@ -18,7 +18,7 @@
#include <linux/i2c.h>
-MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net.");
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 6b6dff4..a373c14 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -782,7 +782,7 @@
static int vino_i2c_del_bus(void)
{
- return i2c_sgi_del_bus(&vino_i2c_adapter);
+ return i2c_del_adapter(&vino_i2c_adapter);
}
static int i2c_camera_command(unsigned int cmd, void *arg)
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 653822c..4d1eb2f 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -849,7 +849,7 @@
static void
zoran_unregister_i2c (struct zoran *zr)
{
- i2c_bit_del_bus((&zr->i2c_adapter));
+ i2c_del_adapter(&zr->i2c_adapter);
}
/* Check a zoran_params struct for correctness, insert default params */
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 03bf164..c2ae2a2 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1930,9 +1930,8 @@
nic->rx_to_use = nic->rx_to_clean = NULL;
nic->ru_running = RU_UNINITIALIZED;
- if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC)))
+ if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
return -ENOMEM;
- memset(nic->rxs, 0, sizeof(struct rx) * count);
for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0b36dd5..2978c09 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -663,7 +663,7 @@
config V850E_UARTB
bool
- depends V850E_UART && V850E_ME2
+ depends on V850E_UART && V850E_ME2
default y
config V850E_UART_CONSOLE
@@ -909,7 +909,7 @@
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends on HAS_TXX9_SERIAL
select SERIAL_CORE
default y
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 7d62300..71e6a24 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1510,7 +1510,7 @@
}
if ( (retval = pci_request_regions(dev, "icom"))) {
- dev_err(&dev->dev, "pci_request_region FAILED\n");
+ dev_err(&dev->dev, "pci_request_regions FAILED\n");
pci_disable_device(dev);
return retval;
}
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 869725a..e7c5b21 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -120,19 +120,19 @@
void radeon_delete_i2c_busses(struct radeonfb_info *rinfo)
{
if (rinfo->i2c[0].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[0].adapter);
+ i2c_del_adapter(&rinfo->i2c[0].adapter);
rinfo->i2c[0].rinfo = NULL;
if (rinfo->i2c[1].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[1].adapter);
+ i2c_del_adapter(&rinfo->i2c[1].adapter);
rinfo->i2c[1].rinfo = NULL;
if (rinfo->i2c[2].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[2].adapter);
+ i2c_del_adapter(&rinfo->i2c[2].adapter);
rinfo->i2c[2].rinfo = NULL;
if (rinfo->i2c[3].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[3].adapter);
+ i2c_del_adapter(&rinfo->i2c[3].adapter);
rinfo->i2c[3].rinfo = NULL;
}
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index b952e45..961f4d4 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -137,15 +137,15 @@
void i810_delete_i2c_busses(struct i810fb_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index 5686e21..33bc41f 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -188,11 +188,11 @@
for (i = 0; i < MAX_OUTPUTS; i++) {
if (dinfo->output[i].i2c_bus.dinfo) {
- i2c_bit_del_bus(&dinfo->output[i].i2c_bus.adapter);
+ i2c_del_adapter(&dinfo->output[i].i2c_bus.adapter);
dinfo->output[i].i2c_bus.dinfo = NULL;
}
if (dinfo->output[i].ddc_bus.dinfo) {
- i2c_bit_del_bus(&dinfo->output[i].ddc_bus.adapter);
+ i2c_del_adapter(&dinfo->output[i].ddc_bus.adapter);
dinfo->output[i].ddc_bus.dinfo = NULL;
}
}
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 795c1a9..797b423 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -124,7 +124,7 @@
static void i2c_bit_bus_del(struct i2c_bit_adapter* b) {
if (b->initialized) {
- i2c_bit_del_bus(&b->adapter);
+ i2c_del_adapter(&b->adapter);
b->initialized = 0;
}
}
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index 442e853..8454adf 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -147,15 +147,15 @@
void nvidia_delete_i2c_busses(struct nvidia_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c
index c15b259..01b85e3 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/riva/rivafb-i2c.c
@@ -144,15 +144,15 @@
void riva_delete_i2c_busses(struct riva_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index cef5bf5..1411f3b 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -208,7 +208,7 @@
struct savagefb_par *par = info->par;
if (par->chan.par)
- i2c_bit_del_bus(&par->chan.adapter);
+ i2c_del_adapter(&par->chan.adapter);
par->chan.par = NULL;
}
diff --git a/fs/Kconfig b/fs/Kconfig
index b3b5aa0..276ff3b 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -12,9 +12,7 @@
Ext2 is a standard Linux file system for hard disks.
To compile this file system support as a module, choose M here: the
- module will be called ext2. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext2.
If unsure, say Y.
@@ -98,9 +96,7 @@
(available at <http://sourceforge.net/projects/e2fsprogs/>).
To compile this file system support as a module, choose M here: the
- module will be called ext3. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this may be dangerous.
+ module will be called ext3.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
@@ -163,9 +159,7 @@
features will be added to ext4dev gradually.
To compile this file system support as a module, choose M here. The
- module will be called ext4dev. Be aware, however, that the filesystem
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext4dev.
If unsure, say N.
@@ -1008,7 +1002,7 @@
config HUGETLBFS
bool "HugeTLB file system support"
- depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
+ depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 76f06f6..6e6d456 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -706,12 +706,11 @@
return -ELIBBAD;
size = sizeof(*loadmap) + nloads * sizeof(*seg);
- loadmap = kmalloc(size, GFP_KERNEL);
+ loadmap = kzalloc(size, GFP_KERNEL);
if (!loadmap)
return -ENOMEM;
params->loadmap = loadmap;
- memset(loadmap, 0, size);
loadmap->version = ELF32_FDPIC_LOADMAP_VERSION;
loadmap->nsegs = nloads;
diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index d11753c..357f1d5 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -35,7 +35,7 @@
/* for now we operate under the assertion that there can be only one
* cluster active at a time. Changing this will require trickling
* cluster references throughout where nodes are looked up */
-static struct o2nm_cluster *o2nm_single_cluster = NULL;
+struct o2nm_cluster *o2nm_single_cluster = NULL;
#define OCFS2_MAX_HB_CTL_PATH 256
static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
@@ -97,17 +97,6 @@
}
EXPORT_SYMBOL_GPL(o2nm_get_hb_ctl_path);
-struct o2nm_cluster {
- struct config_group cl_group;
- unsigned cl_has_local:1;
- u8 cl_local_node;
- rwlock_t cl_nodes_lock;
- struct o2nm_node *cl_nodes[O2NM_MAX_NODES];
- struct rb_root cl_node_ip_tree;
- /* this bitmap is part of a hack for disk bitmap.. will go eventually. - zab */
- unsigned long cl_nodes_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)];
-};
-
struct o2nm_node *o2nm_get_node_by_num(u8 node_num)
{
struct o2nm_node *node = NULL;
@@ -543,6 +532,179 @@
}
#endif
+struct o2nm_cluster_attribute {
+ struct configfs_attribute attr;
+ ssize_t (*show)(struct o2nm_cluster *, char *);
+ ssize_t (*store)(struct o2nm_cluster *, const char *, size_t);
+};
+
+static ssize_t o2nm_cluster_attr_write(const char *page, ssize_t count,
+ unsigned int *val)
+{
+ unsigned long tmp;
+ char *p = (char *)page;
+
+ tmp = simple_strtoul(p, &p, 0);
+ if (!p || (*p && (*p != '\n')))
+ return -EINVAL;
+
+ if (tmp == 0)
+ return -EINVAL;
+ if (tmp >= (u32)-1)
+ return -ERANGE;
+
+ *val = tmp;
+
+ return count;
+}
+
+static ssize_t o2nm_cluster_attr_idle_timeout_ms_read(
+ struct o2nm_cluster *cluster, char *page)
+{
+ return sprintf(page, "%u\n", cluster->cl_idle_timeout_ms);
+}
+
+static ssize_t o2nm_cluster_attr_idle_timeout_ms_write(
+ struct o2nm_cluster *cluster, const char *page, size_t count)
+{
+ ssize_t ret;
+ unsigned int val;
+
+ ret = o2nm_cluster_attr_write(page, count, &val);
+
+ if (ret > 0) {
+ if (cluster->cl_idle_timeout_ms != val
+ && o2net_num_connected_peers()) {
+ mlog(ML_NOTICE,
+ "o2net: cannot change idle timeout after "
+ "the first peer has agreed to it."
+ " %d connected peers\n",
+ o2net_num_connected_peers());
+ ret = -EINVAL;
+ } else if (val <= cluster->cl_keepalive_delay_ms) {
+ mlog(ML_NOTICE, "o2net: idle timeout must be larger "
+ "than keepalive delay\n");
+ ret = -EINVAL;
+ } else {
+ cluster->cl_idle_timeout_ms = val;
+ }
+ }
+
+ return ret;
+}
+
+static ssize_t o2nm_cluster_attr_keepalive_delay_ms_read(
+ struct o2nm_cluster *cluster, char *page)
+{
+ return sprintf(page, "%u\n", cluster->cl_keepalive_delay_ms);
+}
+
+static ssize_t o2nm_cluster_attr_keepalive_delay_ms_write(
+ struct o2nm_cluster *cluster, const char *page, size_t count)
+{
+ ssize_t ret;
+ unsigned int val;
+
+ ret = o2nm_cluster_attr_write(page, count, &val);
+
+ if (ret > 0) {
+ if (cluster->cl_keepalive_delay_ms != val
+ && o2net_num_connected_peers()) {
+ mlog(ML_NOTICE,
+ "o2net: cannot change keepalive delay after"
+ " the first peer has agreed to it."
+ " %d connected peers\n",
+ o2net_num_connected_peers());
+ ret = -EINVAL;
+ } else if (val >= cluster->cl_idle_timeout_ms) {
+ mlog(ML_NOTICE, "o2net: keepalive delay must be "
+ "smaller than idle timeout\n");
+ ret = -EINVAL;
+ } else {
+ cluster->cl_keepalive_delay_ms = val;
+ }
+ }
+
+ return ret;
+}
+
+static ssize_t o2nm_cluster_attr_reconnect_delay_ms_read(
+ struct o2nm_cluster *cluster, char *page)
+{
+ return sprintf(page, "%u\n", cluster->cl_reconnect_delay_ms);
+}
+
+static ssize_t o2nm_cluster_attr_reconnect_delay_ms_write(
+ struct o2nm_cluster *cluster, const char *page, size_t count)
+{
+ return o2nm_cluster_attr_write(page, count,
+ &cluster->cl_reconnect_delay_ms);
+}
+static struct o2nm_cluster_attribute o2nm_cluster_attr_idle_timeout_ms = {
+ .attr = { .ca_owner = THIS_MODULE,
+ .ca_name = "idle_timeout_ms",
+ .ca_mode = S_IRUGO | S_IWUSR },
+ .show = o2nm_cluster_attr_idle_timeout_ms_read,
+ .store = o2nm_cluster_attr_idle_timeout_ms_write,
+};
+
+static struct o2nm_cluster_attribute o2nm_cluster_attr_keepalive_delay_ms = {
+ .attr = { .ca_owner = THIS_MODULE,
+ .ca_name = "keepalive_delay_ms",
+ .ca_mode = S_IRUGO | S_IWUSR },
+ .show = o2nm_cluster_attr_keepalive_delay_ms_read,
+ .store = o2nm_cluster_attr_keepalive_delay_ms_write,
+};
+
+static struct o2nm_cluster_attribute o2nm_cluster_attr_reconnect_delay_ms = {
+ .attr = { .ca_owner = THIS_MODULE,
+ .ca_name = "reconnect_delay_ms",
+ .ca_mode = S_IRUGO | S_IWUSR },
+ .show = o2nm_cluster_attr_reconnect_delay_ms_read,
+ .store = o2nm_cluster_attr_reconnect_delay_ms_write,
+};
+
+static struct configfs_attribute *o2nm_cluster_attrs[] = {
+ &o2nm_cluster_attr_idle_timeout_ms.attr,
+ &o2nm_cluster_attr_keepalive_delay_ms.attr,
+ &o2nm_cluster_attr_reconnect_delay_ms.attr,
+ NULL,
+};
+static ssize_t o2nm_cluster_show(struct config_item *item,
+ struct configfs_attribute *attr,
+ char *page)
+{
+ struct o2nm_cluster *cluster = to_o2nm_cluster(item);
+ struct o2nm_cluster_attribute *o2nm_cluster_attr =
+ container_of(attr, struct o2nm_cluster_attribute, attr);
+ ssize_t ret = 0;
+
+ if (o2nm_cluster_attr->show)
+ ret = o2nm_cluster_attr->show(cluster, page);
+ return ret;
+}
+
+static ssize_t o2nm_cluster_store(struct config_item *item,
+ struct configfs_attribute *attr,
+ const char *page, size_t count)
+{
+ struct o2nm_cluster *cluster = to_o2nm_cluster(item);
+ struct o2nm_cluster_attribute *o2nm_cluster_attr =
+ container_of(attr, struct o2nm_cluster_attribute, attr);
+ ssize_t ret;
+
+ if (o2nm_cluster_attr->store == NULL) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = o2nm_cluster_attr->store(cluster, page, count);
+ if (ret < count)
+ goto out;
+out:
+ return ret;
+}
+
static struct config_item *o2nm_node_group_make_item(struct config_group *group,
const char *name)
{
@@ -624,10 +786,13 @@
static struct configfs_item_operations o2nm_cluster_item_ops = {
.release = o2nm_cluster_release,
+ .show_attribute = o2nm_cluster_show,
+ .store_attribute = o2nm_cluster_store,
};
static struct config_item_type o2nm_cluster_type = {
.ct_item_ops = &o2nm_cluster_item_ops,
+ .ct_attrs = o2nm_cluster_attrs,
.ct_owner = THIS_MODULE,
};
@@ -678,6 +843,9 @@
cluster->cl_group.default_groups[2] = NULL;
rwlock_init(&cluster->cl_nodes_lock);
cluster->cl_node_ip_tree = RB_ROOT;
+ cluster->cl_reconnect_delay_ms = O2NET_RECONNECT_DELAY_MS_DEFAULT;
+ cluster->cl_idle_timeout_ms = O2NET_IDLE_TIMEOUT_MS_DEFAULT;
+ cluster->cl_keepalive_delay_ms = O2NET_KEEPALIVE_DELAY_MS_DEFAULT;
ret = &cluster->cl_group;
o2nm_single_cluster = cluster;
diff --git a/fs/ocfs2/cluster/nodemanager.h b/fs/ocfs2/cluster/nodemanager.h
index fce8033..8fb23ca 100644
--- a/fs/ocfs2/cluster/nodemanager.h
+++ b/fs/ocfs2/cluster/nodemanager.h
@@ -53,6 +53,23 @@
unsigned long nd_set_attributes;
};
+struct o2nm_cluster {
+ struct config_group cl_group;
+ unsigned cl_has_local:1;
+ u8 cl_local_node;
+ rwlock_t cl_nodes_lock;
+ struct o2nm_node *cl_nodes[O2NM_MAX_NODES];
+ struct rb_root cl_node_ip_tree;
+ unsigned int cl_idle_timeout_ms;
+ unsigned int cl_keepalive_delay_ms;
+ unsigned int cl_reconnect_delay_ms;
+
+ /* this bitmap is part of a hack for disk bitmap.. will go eventually. - zab */
+ unsigned long cl_nodes_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)];
+};
+
+extern struct o2nm_cluster *o2nm_single_cluster;
+
u8 o2nm_this_node(void);
int o2nm_configured_node_map(unsigned long *map, unsigned bytes);
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 9b3209d..457753d 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -147,6 +147,28 @@
static void o2net_sc_send_keep_req(struct work_struct *work);
static void o2net_idle_timer(unsigned long data);
static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
+static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
+
+/*
+ * FIXME: These should use to_o2nm_cluster_from_node(), but we end up
+ * losing our parent link to the cluster during shutdown. This can be
+ * solved by adding a pre-removal callback to configfs, or passing
+ * around the cluster with the node. -jeffm
+ */
+static inline int o2net_reconnect_delay(struct o2nm_node *node)
+{
+ return o2nm_single_cluster->cl_reconnect_delay_ms;
+}
+
+static inline int o2net_keepalive_delay(struct o2nm_node *node)
+{
+ return o2nm_single_cluster->cl_keepalive_delay_ms;
+}
+
+static inline int o2net_idle_timeout(struct o2nm_node *node)
+{
+ return o2nm_single_cluster->cl_idle_timeout_ms;
+}
static inline int o2net_sys_err_to_errno(enum o2net_system_error err)
{
@@ -271,6 +293,8 @@
{
struct o2net_sock_container *sc = container_of(kref,
struct o2net_sock_container, sc_kref);
+ BUG_ON(timer_pending(&sc->sc_idle_timeout));
+
sclog(sc, "releasing\n");
if (sc->sc_sock) {
@@ -356,6 +380,13 @@
sc_put(sc);
}
+static atomic_t o2net_connected_peers = ATOMIC_INIT(0);
+
+int o2net_num_connected_peers(void)
+{
+ return atomic_read(&o2net_connected_peers);
+}
+
static void o2net_set_nn_state(struct o2net_node *nn,
struct o2net_sock_container *sc,
unsigned valid, int err)
@@ -366,6 +397,11 @@
assert_spin_locked(&nn->nn_lock);
+ if (old_sc && !sc)
+ atomic_dec(&o2net_connected_peers);
+ else if (!old_sc && sc)
+ atomic_inc(&o2net_connected_peers);
+
/* the node num comparison and single connect/accept path should stop
* an non-null sc from being overwritten with another */
BUG_ON(sc && nn->nn_sc && nn->nn_sc != sc);
@@ -424,9 +460,9 @@
/* delay if we're withing a RECONNECT_DELAY of the
* last attempt */
delay = (nn->nn_last_connect_attempt +
- msecs_to_jiffies(O2NET_RECONNECT_DELAY_MS))
+ msecs_to_jiffies(o2net_reconnect_delay(sc->sc_node)))
- jiffies;
- if (delay > msecs_to_jiffies(O2NET_RECONNECT_DELAY_MS))
+ if (delay > msecs_to_jiffies(o2net_reconnect_delay(sc->sc_node)))
delay = 0;
mlog(ML_CONN, "queueing conn attempt in %lu jiffies\n", delay);
queue_delayed_work(o2net_wq, &nn->nn_connect_work, delay);
@@ -1099,13 +1135,51 @@
return -1;
}
+ /*
+ * Ensure timeouts are consistent with other nodes, otherwise
+ * we can end up with one node thinking that the other must be down,
+ * but isn't. This can ultimately cause corruption.
+ */
+ if (be32_to_cpu(hand->o2net_idle_timeout_ms) !=
+ o2net_idle_timeout(sc->sc_node)) {
+ mlog(ML_NOTICE, SC_NODEF_FMT " uses a network idle timeout of "
+ "%u ms, but we use %u ms locally. disconnecting\n",
+ SC_NODEF_ARGS(sc),
+ be32_to_cpu(hand->o2net_idle_timeout_ms),
+ o2net_idle_timeout(sc->sc_node));
+ o2net_ensure_shutdown(nn, sc, -ENOTCONN);
+ return -1;
+ }
+
+ if (be32_to_cpu(hand->o2net_keepalive_delay_ms) !=
+ o2net_keepalive_delay(sc->sc_node)) {
+ mlog(ML_NOTICE, SC_NODEF_FMT " uses a keepalive delay of "
+ "%u ms, but we use %u ms locally. disconnecting\n",
+ SC_NODEF_ARGS(sc),
+ be32_to_cpu(hand->o2net_keepalive_delay_ms),
+ o2net_keepalive_delay(sc->sc_node));
+ o2net_ensure_shutdown(nn, sc, -ENOTCONN);
+ return -1;
+ }
+
+ if (be32_to_cpu(hand->o2hb_heartbeat_timeout_ms) !=
+ O2HB_MAX_WRITE_TIMEOUT_MS) {
+ mlog(ML_NOTICE, SC_NODEF_FMT " uses a heartbeat timeout of "
+ "%u ms, but we use %u ms locally. disconnecting\n",
+ SC_NODEF_ARGS(sc),
+ be32_to_cpu(hand->o2hb_heartbeat_timeout_ms),
+ O2HB_MAX_WRITE_TIMEOUT_MS);
+ o2net_ensure_shutdown(nn, sc, -ENOTCONN);
+ return -1;
+ }
+
sc->sc_handshake_ok = 1;
spin_lock(&nn->nn_lock);
/* set valid and queue the idle timers only if it hasn't been
* shut down already */
if (nn->nn_sc == sc) {
- o2net_sc_postpone_idle(sc);
+ o2net_sc_reset_idle_timer(sc);
o2net_set_nn_state(nn, sc, 1, 0);
}
spin_unlock(&nn->nn_lock);
@@ -1131,6 +1205,23 @@
sclog(sc, "receiving\n");
do_gettimeofday(&sc->sc_tv_advance_start);
+ if (unlikely(sc->sc_handshake_ok == 0)) {
+ if(sc->sc_page_off < sizeof(struct o2net_handshake)) {
+ data = page_address(sc->sc_page) + sc->sc_page_off;
+ datalen = sizeof(struct o2net_handshake) - sc->sc_page_off;
+ ret = o2net_recv_tcp_msg(sc->sc_sock, data, datalen);
+ if (ret > 0)
+ sc->sc_page_off += ret;
+ }
+
+ if (sc->sc_page_off == sizeof(struct o2net_handshake)) {
+ o2net_check_handshake(sc);
+ if (unlikely(sc->sc_handshake_ok == 0))
+ ret = -EPROTO;
+ }
+ goto out;
+ }
+
/* do we need more header? */
if (sc->sc_page_off < sizeof(struct o2net_msg)) {
data = page_address(sc->sc_page) + sc->sc_page_off;
@@ -1138,15 +1229,6 @@
ret = o2net_recv_tcp_msg(sc->sc_sock, data, datalen);
if (ret > 0) {
sc->sc_page_off += ret;
-
- /* this working relies on the handshake being
- * smaller than the normal message header */
- if (sc->sc_page_off >= sizeof(struct o2net_handshake)&&
- !sc->sc_handshake_ok && o2net_check_handshake(sc)) {
- ret = -EPROTO;
- goto out;
- }
-
/* only swab incoming here.. we can
* only get here once as we cross from
* being under to over */
@@ -1248,6 +1330,18 @@
return ret;
}
+static void o2net_initialize_handshake(void)
+{
+ o2net_hand->o2hb_heartbeat_timeout_ms = cpu_to_be32(
+ O2HB_MAX_WRITE_TIMEOUT_MS);
+ o2net_hand->o2net_idle_timeout_ms = cpu_to_be32(
+ o2net_idle_timeout(NULL));
+ o2net_hand->o2net_keepalive_delay_ms = cpu_to_be32(
+ o2net_keepalive_delay(NULL));
+ o2net_hand->o2net_reconnect_delay_ms = cpu_to_be32(
+ o2net_reconnect_delay(NULL));
+}
+
/* ------------------------------------------------------------ */
/* called when a connect completes and after a sock is accepted. the
@@ -1262,6 +1356,7 @@
(unsigned long long)O2NET_PROTOCOL_VERSION,
(unsigned long long)be64_to_cpu(o2net_hand->connector_id));
+ o2net_initialize_handshake();
o2net_sendpage(sc, o2net_hand, sizeof(*o2net_hand));
sc_put(sc);
}
@@ -1287,8 +1382,10 @@
do_gettimeofday(&now);
- printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT " has been idle for 10 "
- "seconds, shutting it down.\n", SC_NODEF_ARGS(sc));
+ printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u "
+ "seconds, shutting it down.\n", SC_NODEF_ARGS(sc),
+ o2net_idle_timeout(sc->sc_node) / 1000,
+ o2net_idle_timeout(sc->sc_node) % 1000);
mlog(ML_NOTICE, "here are some times that might help debug the "
"situation: (tmr %ld.%ld now %ld.%ld dr %ld.%ld adv "
"%ld.%ld:%ld.%ld func (%08x:%u) %ld.%ld:%ld.%ld)\n",
@@ -1306,14 +1403,21 @@
o2net_sc_queue_work(sc, &sc->sc_shutdown_work);
}
-static void o2net_sc_postpone_idle(struct o2net_sock_container *sc)
+static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc)
{
o2net_sc_cancel_delayed_work(sc, &sc->sc_keepalive_work);
o2net_sc_queue_delayed_work(sc, &sc->sc_keepalive_work,
- O2NET_KEEPALIVE_DELAY_SECS * HZ);
+ msecs_to_jiffies(o2net_keepalive_delay(sc->sc_node)));
do_gettimeofday(&sc->sc_tv_timer);
mod_timer(&sc->sc_idle_timeout,
- jiffies + (O2NET_IDLE_TIMEOUT_SECS * HZ));
+ jiffies + msecs_to_jiffies(o2net_idle_timeout(sc->sc_node)));
+}
+
+static void o2net_sc_postpone_idle(struct o2net_sock_container *sc)
+{
+ /* Only push out an existing timer */
+ if (timer_pending(&sc->sc_idle_timeout))
+ o2net_sc_reset_idle_timer(sc);
}
/* this work func is kicked whenever a path sets the nn state which doesn't
@@ -1435,9 +1539,12 @@
spin_lock(&nn->nn_lock);
if (!nn->nn_sc_valid) {
+ struct o2nm_node *node = nn->nn_sc->sc_node;
mlog(ML_ERROR, "no connection established with node %u after "
- "%u seconds, giving up and returning errors.\n",
- o2net_num_from_nn(nn), O2NET_IDLE_TIMEOUT_SECS);
+ "%u.%u seconds, giving up and returning errors.\n",
+ o2net_num_from_nn(nn),
+ o2net_idle_timeout(node) / 1000,
+ o2net_idle_timeout(node) % 1000);
o2net_set_nn_state(nn, NULL, 0, -ENOTCONN);
}
@@ -1478,6 +1585,8 @@
if (node_num != o2nm_this_node())
o2net_disconnect_node(node);
+
+ BUG_ON(atomic_read(&o2net_connected_peers) < 0);
}
static void o2net_hb_node_up_cb(struct o2nm_node *node, int node_num,
@@ -1489,14 +1598,14 @@
/* ensure an immediate connect attempt */
nn->nn_last_connect_attempt = jiffies -
- (msecs_to_jiffies(O2NET_RECONNECT_DELAY_MS) + 1);
+ (msecs_to_jiffies(o2net_reconnect_delay(node)) + 1);
if (node_num != o2nm_this_node()) {
/* heartbeat doesn't work unless a local node number is
* configured and doing so brings up the o2net_wq, so we can
* use it.. */
queue_delayed_work(o2net_wq, &nn->nn_connect_expired,
- O2NET_IDLE_TIMEOUT_SECS * HZ);
+ msecs_to_jiffies(o2net_idle_timeout(node)));
/* believe it or not, accept and node hearbeating testing
* can succeed for this node before we got here.. so
@@ -1641,6 +1750,7 @@
o2net_register_callbacks(sc->sc_sock->sk, sc);
o2net_sc_queue_work(sc, &sc->sc_rx_work);
+ o2net_initialize_handshake();
o2net_sendpage(sc, o2net_hand, sizeof(*o2net_hand));
out:
diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h
index 616ff2b..21a4e43 100644
--- a/fs/ocfs2/cluster/tcp.h
+++ b/fs/ocfs2/cluster/tcp.h
@@ -54,6 +54,13 @@
#define O2NET_MAX_PAYLOAD_BYTES (4096 - sizeof(struct o2net_msg))
+/* same as hb delay, we're waiting for another node to recognize our hb */
+#define O2NET_RECONNECT_DELAY_MS_DEFAULT 2000
+
+#define O2NET_KEEPALIVE_DELAY_MS_DEFAULT 5000
+#define O2NET_IDLE_TIMEOUT_MS_DEFAULT 10000
+
+
/* TODO: figure this out.... */
static inline int o2net_link_down(int err, struct socket *sock)
{
@@ -101,6 +108,7 @@
int o2net_start_listening(struct o2nm_node *node);
void o2net_stop_listening(struct o2nm_node *node);
void o2net_disconnect_node(struct o2nm_node *node);
+int o2net_num_connected_peers(void);
int o2net_init(void);
void o2net_exit(void);
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index daebbd3..b700dc9 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -27,23 +27,20 @@
#define O2NET_MSG_KEEP_REQ_MAGIC ((u16)0xfa57)
#define O2NET_MSG_KEEP_RESP_MAGIC ((u16)0xfa58)
-/* same as hb delay, we're waiting for another node to recognize our hb */
-#define O2NET_RECONNECT_DELAY_MS O2HB_REGION_TIMEOUT_MS
-
/* we're delaying our quorum decision so that heartbeat will have timed
* out truly dead nodes by the time we come around to making decisions
* on their number */
#define O2NET_QUORUM_DELAY_MS ((o2hb_dead_threshold + 2) * O2HB_REGION_TIMEOUT_MS)
-#define O2NET_KEEPALIVE_DELAY_SECS 5
-#define O2NET_IDLE_TIMEOUT_SECS 10
-
/*
* This version number represents quite a lot, unfortunately. It not
* only represents the raw network message protocol on the wire but also
* locking semantics of the file system using the protocol. It should
* be somewhere else, I'm sure, but right now it isn't.
*
+ * New in version 5:
+ * - Network timeout checking protocol
+ *
* New in version 4:
* - Remove i_generation from lock names for better stat performance.
*
@@ -54,10 +51,14 @@
* - full 64 bit i_size in the metadata lock lvbs
* - introduction of "rw" lock and pushing meta/data locking down
*/
-#define O2NET_PROTOCOL_VERSION 4ULL
+#define O2NET_PROTOCOL_VERSION 5ULL
struct o2net_handshake {
__be64 protocol_version;
__be64 connector_id;
+ __be32 o2hb_heartbeat_timeout_ms;
+ __be32 o2net_idle_timeout_ms;
+ __be32 o2net_keepalive_delay_ms;
+ __be32 o2net_reconnect_delay_ms;
};
struct o2net_node {
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 69fba16..e622013 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -770,7 +770,7 @@
int dlm_flags)
{
int ret = 0;
- enum dlm_status status;
+ enum dlm_status status = DLM_NORMAL;
unsigned long flags;
mlog_entry_void();
@@ -1138,6 +1138,7 @@
{
int status, level;
struct ocfs2_lock_res *lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
BUG_ON(!inode);
@@ -1147,6 +1148,9 @@
(unsigned long long)OCFS2_I(inode)->ip_blkno,
write ? "EXMODE" : "PRMODE");
+ if (ocfs2_mount_local(osb))
+ return 0;
+
lockres = &OCFS2_I(inode)->ip_rw_lockres;
level = write ? LKM_EXMODE : LKM_PRMODE;
@@ -1164,6 +1168,7 @@
{
int level = write ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_rw_lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry_void();
@@ -1171,7 +1176,8 @@
(unsigned long long)OCFS2_I(inode)->ip_blkno,
write ? "EXMODE" : "PRMODE");
- ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
+ if (!ocfs2_mount_local(osb))
+ ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
mlog_exit_void();
}
@@ -1182,6 +1188,7 @@
{
int status = 0, level;
struct ocfs2_lock_res *lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
BUG_ON(!inode);
@@ -1201,6 +1208,9 @@
goto out;
}
+ if (ocfs2_mount_local(osb))
+ goto out;
+
lockres = &OCFS2_I(inode)->ip_data_lockres;
level = write ? LKM_EXMODE : LKM_PRMODE;
@@ -1269,6 +1279,7 @@
{
int level = write ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_data_lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry_void();
@@ -1276,7 +1287,8 @@
(unsigned long long)OCFS2_I(inode)->ip_blkno,
write ? "EXMODE" : "PRMODE");
- if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)))
+ if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)) &&
+ !ocfs2_mount_local(osb))
ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
mlog_exit_void();
@@ -1467,8 +1479,9 @@
{
int status = 0;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
- struct ocfs2_lock_res *lockres;
+ struct ocfs2_lock_res *lockres = NULL;
struct ocfs2_dinode *fe;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry_void();
@@ -1483,10 +1496,12 @@
}
spin_unlock(&oi->ip_lock);
- lockres = &oi->ip_meta_lockres;
+ if (!ocfs2_mount_local(osb)) {
+ lockres = &oi->ip_meta_lockres;
- if (!ocfs2_should_refresh_lock_res(lockres))
- goto bail;
+ if (!ocfs2_should_refresh_lock_res(lockres))
+ goto bail;
+ }
/* This will discard any caching information we might have had
* for the inode metadata. */
@@ -1496,7 +1511,7 @@
* map (directories, bitmap files, etc) */
ocfs2_extent_map_trunc(inode, 0);
- if (ocfs2_meta_lvb_is_trustable(inode, lockres)) {
+ if (lockres && ocfs2_meta_lvb_is_trustable(inode, lockres)) {
mlog(0, "Trusting LVB on inode %llu\n",
(unsigned long long)oi->ip_blkno);
ocfs2_refresh_inode_from_lvb(inode);
@@ -1543,7 +1558,8 @@
status = 0;
bail_refresh:
- ocfs2_complete_lock_res_refresh(lockres, status);
+ if (lockres)
+ ocfs2_complete_lock_res_refresh(lockres, status);
bail:
mlog_exit(status);
return status;
@@ -1585,7 +1601,7 @@
int arg_flags)
{
int status, level, dlm_flags, acquired;
- struct ocfs2_lock_res *lockres;
+ struct ocfs2_lock_res *lockres = NULL;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct buffer_head *local_bh = NULL;
@@ -1607,6 +1623,9 @@
goto bail;
}
+ if (ocfs2_mount_local(osb))
+ goto local;
+
if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
wait_event(osb->recovery_event,
ocfs2_node_map_is_empty(osb, &osb->recovery_map));
@@ -1636,6 +1655,7 @@
wait_event(osb->recovery_event,
ocfs2_node_map_is_empty(osb, &osb->recovery_map));
+local:
/*
* We only see this flag if we're being called from
* ocfs2_read_locked_inode(). It means we're locking an inode
@@ -1644,7 +1664,8 @@
*/
if (inode->i_state & I_NEW) {
status = 0;
- ocfs2_complete_lock_res_refresh(lockres, 0);
+ if (lockres)
+ ocfs2_complete_lock_res_refresh(lockres, 0);
goto bail;
}
@@ -1767,6 +1788,7 @@
{
int level = ex ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_meta_lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry_void();
@@ -1774,7 +1796,8 @@
(unsigned long long)OCFS2_I(inode)->ip_blkno,
ex ? "EXMODE" : "PRMODE");
- if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)))
+ if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)) &&
+ !ocfs2_mount_local(osb))
ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
mlog_exit_void();
@@ -1783,7 +1806,7 @@
int ocfs2_super_lock(struct ocfs2_super *osb,
int ex)
{
- int status;
+ int status = 0;
int level = ex ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &osb->osb_super_lockres;
struct buffer_head *bh;
@@ -1794,6 +1817,9 @@
if (ocfs2_is_hard_readonly(osb))
return -EROFS;
+ if (ocfs2_mount_local(osb))
+ goto bail;
+
status = ocfs2_cluster_lock(osb, lockres, level, 0, 0);
if (status < 0) {
mlog_errno(status);
@@ -1832,7 +1858,8 @@
int level = ex ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &osb->osb_super_lockres;
- ocfs2_cluster_unlock(osb, lockres, level);
+ if (!ocfs2_mount_local(osb))
+ ocfs2_cluster_unlock(osb, lockres, level);
}
int ocfs2_rename_lock(struct ocfs2_super *osb)
@@ -1843,6 +1870,9 @@
if (ocfs2_is_hard_readonly(osb))
return -EROFS;
+ if (ocfs2_mount_local(osb))
+ return 0;
+
status = ocfs2_cluster_lock(osb, lockres, LKM_EXMODE, 0, 0);
if (status < 0)
mlog_errno(status);
@@ -1854,7 +1884,8 @@
{
struct ocfs2_lock_res *lockres = &osb->osb_rename_lockres;
- ocfs2_cluster_unlock(osb, lockres, LKM_EXMODE);
+ if (!ocfs2_mount_local(osb))
+ ocfs2_cluster_unlock(osb, lockres, LKM_EXMODE);
}
int ocfs2_dentry_lock(struct dentry *dentry, int ex)
@@ -1869,6 +1900,9 @@
if (ocfs2_is_hard_readonly(osb))
return -EROFS;
+ if (ocfs2_mount_local(osb))
+ return 0;
+
ret = ocfs2_cluster_lock(osb, &dl->dl_lockres, level, 0, 0);
if (ret < 0)
mlog_errno(ret);
@@ -1882,7 +1916,8 @@
struct ocfs2_dentry_lock *dl = dentry->d_fsdata;
struct ocfs2_super *osb = OCFS2_SB(dentry->d_sb);
- ocfs2_cluster_unlock(osb, &dl->dl_lockres, level);
+ if (!ocfs2_mount_local(osb))
+ ocfs2_cluster_unlock(osb, &dl->dl_lockres, level);
}
/* Reference counting of the dlm debug structure. We want this because
@@ -2145,12 +2180,15 @@
int ocfs2_dlm_init(struct ocfs2_super *osb)
{
- int status;
+ int status = 0;
u32 dlm_key;
- struct dlm_ctxt *dlm;
+ struct dlm_ctxt *dlm = NULL;
mlog_entry_void();
+ if (ocfs2_mount_local(osb))
+ goto local;
+
status = ocfs2_dlm_init_debug(osb);
if (status < 0) {
mlog_errno(status);
@@ -2178,11 +2216,12 @@
goto bail;
}
+ dlm_register_eviction_cb(dlm, &osb->osb_eviction_cb);
+
+local:
ocfs2_super_lock_res_init(&osb->osb_super_lockres, osb);
ocfs2_rename_lock_res_init(&osb->osb_rename_lockres, osb);
- dlm_register_eviction_cb(dlm, &osb->osb_eviction_cb);
-
osb->dlm = dlm;
status = 0;
diff --git a/fs/ocfs2/heartbeat.c b/fs/ocfs2/heartbeat.c
index cbfd45a..8fc52d6 100644
--- a/fs/ocfs2/heartbeat.c
+++ b/fs/ocfs2/heartbeat.c
@@ -154,6 +154,9 @@
{
int status;
+ if (ocfs2_mount_local(osb))
+ return 0;
+
status = o2hb_register_callback(&osb->osb_hb_down);
if (status < 0) {
mlog_errno(status);
@@ -172,6 +175,9 @@
{
int status;
+ if (ocfs2_mount_local(osb))
+ return;
+
status = o2hb_unregister_callback(&osb->osb_hb_down);
if (status < 0)
mlog_errno(status);
@@ -186,6 +192,9 @@
int ret;
char *argv[5], *envp[3];
+ if (ocfs2_mount_local(osb))
+ return;
+
if (!osb->uuid_str) {
/* This can happen if we don't get far enough in mount... */
mlog(0, "No UUID with which to stop heartbeat!\n\n");
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 42e361f..e4d9149 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -423,7 +423,8 @@
* cluster lock before trusting anything anyway.
*/
can_lock = !(args->fi_flags & OCFS2_FI_FLAG_SYSFILE)
- && !(args->fi_flags & OCFS2_FI_FLAG_NOLOCK);
+ && !(args->fi_flags & OCFS2_FI_FLAG_NOLOCK)
+ && !ocfs2_mount_local(osb);
/*
* To maintain backwards compatibility with older versions of
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 1d7f4ab..825cb0a 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -144,8 +144,10 @@
ocfs2_abort(osb->sb, "Detected aborted journal");
handle = ERR_PTR(-EROFS);
}
- } else
- atomic_inc(&(osb->journal->j_num_trans));
+ } else {
+ if (!ocfs2_mount_local(osb))
+ atomic_inc(&(osb->journal->j_num_trans));
+ }
return handle;
}
@@ -507,9 +509,23 @@
BUG_ON(atomic_read(&(osb->journal->j_num_trans)) != 0);
- status = ocfs2_journal_toggle_dirty(osb, 0);
- if (status < 0)
- mlog_errno(status);
+ if (ocfs2_mount_local(osb)) {
+ journal_lock_updates(journal->j_journal);
+ status = journal_flush(journal->j_journal);
+ journal_unlock_updates(journal->j_journal);
+ if (status < 0)
+ mlog_errno(status);
+ }
+
+ if (status == 0) {
+ /*
+ * Do not toggle if flush was unsuccessful otherwise
+ * will leave dirty metadata in a "clean" journal
+ */
+ status = ocfs2_journal_toggle_dirty(osb, 0);
+ if (status < 0)
+ mlog_errno(status);
+ }
/* Shutdown the kernel journal system */
journal_destroy(journal->j_journal);
@@ -549,7 +565,7 @@
}
}
-int ocfs2_journal_load(struct ocfs2_journal *journal)
+int ocfs2_journal_load(struct ocfs2_journal *journal, int local)
{
int status = 0;
struct ocfs2_super *osb;
@@ -576,14 +592,18 @@
}
/* Launch the commit thread */
- osb->commit_task = kthread_run(ocfs2_commit_thread, osb, "ocfs2cmt");
- if (IS_ERR(osb->commit_task)) {
- status = PTR_ERR(osb->commit_task);
+ if (!local) {
+ osb->commit_task = kthread_run(ocfs2_commit_thread, osb,
+ "ocfs2cmt");
+ if (IS_ERR(osb->commit_task)) {
+ status = PTR_ERR(osb->commit_task);
+ osb->commit_task = NULL;
+ mlog(ML_ERROR, "unable to launch ocfs2commit thread, "
+ "error=%d", status);
+ goto done;
+ }
+ } else
osb->commit_task = NULL;
- mlog(ML_ERROR, "unable to launch ocfs2commit thread, error=%d",
- status);
- goto done;
- }
done:
mlog_exit(status);
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 899112a..e121636 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -157,7 +157,7 @@
void ocfs2_journal_shutdown(struct ocfs2_super *osb);
int ocfs2_journal_wipe(struct ocfs2_journal *journal,
int full);
-int ocfs2_journal_load(struct ocfs2_journal *journal);
+int ocfs2_journal_load(struct ocfs2_journal *journal, int local);
int ocfs2_check_journals_nolocks(struct ocfs2_super *osb);
void ocfs2_recovery_thread(struct ocfs2_super *osb,
int node_num);
@@ -174,6 +174,9 @@
{
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+ if (ocfs2_mount_local(osb))
+ return;
+
if (!ocfs2_inode_fully_checkpointed(inode)) {
/* WARNING: This only kicks off a single
* checkpoint. If someone races you and adds more
diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c
index 69f85ae..51b0204 100644
--- a/fs/ocfs2/mmap.c
+++ b/fs/ocfs2/mmap.c
@@ -83,10 +83,12 @@
int ocfs2_mmap(struct file *file, struct vm_area_struct *vma)
{
int ret = 0, lock_level = 0;
+ struct ocfs2_super *osb = OCFS2_SB(file->f_dentry->d_inode->i_sb);
/* We don't want to support shared writable mappings yet. */
- if (((vma->vm_flags & VM_SHARED) || (vma->vm_flags & VM_MAYSHARE))
- && ((vma->vm_flags & VM_WRITE) || (vma->vm_flags & VM_MAYWRITE))) {
+ if (!ocfs2_mount_local(osb) &&
+ ((vma->vm_flags & VM_SHARED) || (vma->vm_flags & VM_MAYSHARE)) &&
+ ((vma->vm_flags & VM_WRITE) || (vma->vm_flags & VM_MAYWRITE))) {
mlog(0, "disallow shared writable mmaps %lx\n", vma->vm_flags);
/* This is -EINVAL because generic_file_readonly_mmap
* returns it in a similar situation. */
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 21db45d..9637039 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -587,9 +587,11 @@
}
ocfs2_inode_set_new(osb, inode);
- status = ocfs2_create_new_inode_locks(inode);
- if (status < 0)
- mlog_errno(status);
+ if (!ocfs2_mount_local(osb)) {
+ status = ocfs2_create_new_inode_locks(inode);
+ if (status < 0)
+ mlog_errno(status);
+ }
status = 0; /* error in ocfs2_create_new_inode_locks is not
* critical */
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index b767fd7..db8e77c 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -349,6 +349,11 @@
return ret;
}
+static inline int ocfs2_mount_local(struct ocfs2_super *osb)
+{
+ return (osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT);
+}
+
#define OCFS2_IS_VALID_DINODE(ptr) \
(!strcmp((ptr)->i_signature, OCFS2_INODE_SIGNATURE))
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 3330a5d..b5c6856 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -86,7 +86,7 @@
OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
#define OCFS2_FEATURE_COMPAT_SUPP 0
-#define OCFS2_FEATURE_INCOMPAT_SUPP 0
+#define OCFS2_FEATURE_INCOMPAT_SUPP OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT
#define OCFS2_FEATURE_RO_COMPAT_SUPP 0
/*
@@ -96,6 +96,18 @@
*/
#define OCFS2_FEATURE_INCOMPAT_HEARTBEAT_DEV 0x0002
+/*
+ * tunefs sets this incompat flag before starting the resize and clears it
+ * at the end. This flag protects users from inadvertently mounting the fs
+ * after an aborted run without fsck-ing.
+ */
+#define OCFS2_FEATURE_INCOMPAT_RESIZE_INPROG 0x0004
+
+/* Used to denote a non-clustered volume */
+#define OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT 0x0008
+
+/* Support for sparse allocation in b-trees */
+#define OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC 0x0010
/*
* Flags on ocfs2_dinode.i_flags
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 4bf3954..a6d2f8c 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -508,6 +508,27 @@
return status;
}
+static int ocfs2_verify_heartbeat(struct ocfs2_super *osb)
+{
+ if (ocfs2_mount_local(osb)) {
+ if (osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) {
+ mlog(ML_ERROR, "Cannot heartbeat on a locally "
+ "mounted device.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (!(osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL)) {
+ if (!ocfs2_mount_local(osb) && !ocfs2_is_hard_readonly(osb)) {
+ mlog(ML_ERROR, "Heartbeat has to be started to mount "
+ "a read-write clustered device.\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
{
struct dentry *root;
@@ -516,16 +537,24 @@
struct inode *inode = NULL;
struct ocfs2_super *osb = NULL;
struct buffer_head *bh = NULL;
+ char nodestr[8];
mlog_entry("%p, %p, %i", sb, data, silent);
- /* for now we only have one cluster/node, make sure we see it
- * in the heartbeat universe */
- if (!o2hb_check_local_node_heartbeating()) {
+ if (!ocfs2_parse_options(sb, data, &parsed_opt, 0)) {
status = -EINVAL;
goto read_super_error;
}
+ /* for now we only have one cluster/node, make sure we see it
+ * in the heartbeat universe */
+ if (parsed_opt & OCFS2_MOUNT_HB_LOCAL) {
+ if (!o2hb_check_local_node_heartbeating()) {
+ status = -EINVAL;
+ goto read_super_error;
+ }
+ }
+
/* probe for superblock */
status = ocfs2_sb_probe(sb, &bh, §or_size);
if (status < 0) {
@@ -541,11 +570,6 @@
}
brelse(bh);
bh = NULL;
-
- if (!ocfs2_parse_options(sb, data, &parsed_opt, 0)) {
- status = -EINVAL;
- goto read_super_error;
- }
osb->s_mount_opt = parsed_opt;
sb->s_magic = OCFS2_SUPER_MAGIC;
@@ -588,21 +612,16 @@
}
if (!ocfs2_is_hard_readonly(osb)) {
- /* If this isn't a hard readonly mount, then we need
- * to make sure that heartbeat is in a valid state,
- * and that we mark ourselves soft readonly is -oro
- * was specified. */
- if (!(osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL)) {
- mlog(ML_ERROR, "No heartbeat for device (%s)\n",
- sb->s_id);
- status = -EINVAL;
- goto read_super_error;
- }
-
if (sb->s_flags & MS_RDONLY)
ocfs2_set_ro_flag(osb, 0);
}
+ status = ocfs2_verify_heartbeat(osb);
+ if (status < 0) {
+ mlog_errno(status);
+ goto read_super_error;
+ }
+
osb->osb_debug_root = debugfs_create_dir(osb->uuid_str,
ocfs2_debugfs_root);
if (!osb->osb_debug_root) {
@@ -635,9 +654,14 @@
ocfs2_complete_mount_recovery(osb);
- printk(KERN_INFO "ocfs2: Mounting device (%s) on (node %d, slot %d) "
+ if (ocfs2_mount_local(osb))
+ snprintf(nodestr, sizeof(nodestr), "local");
+ else
+ snprintf(nodestr, sizeof(nodestr), "%d", osb->node_num);
+
+ printk(KERN_INFO "ocfs2: Mounting device (%s) on (node %s, slot %d) "
"with %s data mode.\n",
- osb->dev_str, osb->node_num, osb->slot_num,
+ osb->dev_str, nodestr, osb->slot_num,
osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK ? "writeback" :
"ordered");
@@ -999,7 +1023,11 @@
/* XXX hold a ref on the node while mounte? easy enough, if
* desirable. */
- osb->node_num = o2nm_this_node();
+ if (ocfs2_mount_local(osb))
+ osb->node_num = 0;
+ else
+ osb->node_num = o2nm_this_node();
+
if (osb->node_num == O2NM_MAX_NODES) {
mlog(ML_ERROR, "could not find this host's node number\n");
status = -ENOENT;
@@ -1084,6 +1112,9 @@
goto leave;
}
+ if (ocfs2_mount_local(osb))
+ goto leave;
+
/* This should be sent *after* we recovered our journal as it
* will cause other nodes to unmark us as needing
* recovery. However, we need to send it *before* dropping the
@@ -1114,6 +1145,7 @@
{
int tmp;
struct ocfs2_super *osb = NULL;
+ char nodestr[8];
mlog_entry("(0x%p)\n", sb);
@@ -1177,8 +1209,13 @@
atomic_set(&osb->vol_state, VOLUME_DISMOUNTED);
- printk(KERN_INFO "ocfs2: Unmounting device (%s) on (node %d)\n",
- osb->dev_str, osb->node_num);
+ if (ocfs2_mount_local(osb))
+ snprintf(nodestr, sizeof(nodestr), "local");
+ else
+ snprintf(nodestr, sizeof(nodestr), "%d", osb->node_num);
+
+ printk(KERN_INFO "ocfs2: Unmounting device (%s) on (node %s)\n",
+ osb->dev_str, nodestr);
ocfs2_delete_osb(osb);
kfree(osb);
@@ -1536,6 +1573,7 @@
{
int status = 0;
int dirty;
+ int local;
struct ocfs2_dinode *local_alloc = NULL; /* only used if we
* recover
* ourselves. */
@@ -1563,8 +1601,10 @@
"recovering volume.\n");
}
+ local = ocfs2_mount_local(osb);
+
/* will play back anything left in the journal. */
- ocfs2_journal_load(osb->journal);
+ ocfs2_journal_load(osb->journal, local);
if (dirty) {
/* recover my local alloc if we didn't unmount cleanly. */
diff --git a/fs/ocfs2/vote.c b/fs/ocfs2/vote.c
index 5b4dca7..0315a8b 100644
--- a/fs/ocfs2/vote.c
+++ b/fs/ocfs2/vote.c
@@ -1000,6 +1000,9 @@
{
int status = 0;
+ if (ocfs2_mount_local(osb))
+ return 0;
+
status = o2net_register_handler(OCFS2_MESSAGE_TYPE_RESPONSE,
osb->net_key,
sizeof(struct ocfs2_response_msg),
diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/include/asm-arm/arch-pnx4008/i2c.h
new file mode 100644
index 0000000..92e8d65
--- /dev/null
+++ b/include/asm-arm/arch-pnx4008/i2c.h
@@ -0,0 +1,67 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H__
+#define __ASM_ARCH_I2C_H__
+
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+
+enum {
+ mstatus_tdi = 0x00000001,
+ mstatus_afi = 0x00000002,
+ mstatus_nai = 0x00000004,
+ mstatus_drmi = 0x00000008,
+ mstatus_active = 0x00000020,
+ mstatus_scl = 0x00000040,
+ mstatus_sda = 0x00000080,
+ mstatus_rff = 0x00000100,
+ mstatus_rfe = 0x00000200,
+ mstatus_tff = 0x00000400,
+ mstatus_tfe = 0x00000800,
+};
+
+enum {
+ mcntrl_tdie = 0x00000001,
+ mcntrl_afie = 0x00000002,
+ mcntrl_naie = 0x00000004,
+ mcntrl_drmie = 0x00000008,
+ mcntrl_daie = 0x00000020,
+ mcntrl_rffie = 0x00000040,
+ mcntrl_tffie = 0x00000080,
+ mcntrl_reset = 0x00000100,
+ mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+ rw_bit = 1 << 0,
+ start_bit = 1 << 8,
+ stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
+#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
+#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
+#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
+#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
+#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
+
+#define HCLK_MHZ 13
+#define I2C_CHIP_NAME "PNX4008-I2C"
+
+#endif /* __ASM_ARCH_I2C_H___ */
diff --git a/include/asm-i386/msr.h b/include/asm-i386/msr.h
index 5679d49..609a389 100644
--- a/include/asm-i386/msr.h
+++ b/include/asm-i386/msr.h
@@ -100,6 +100,8 @@
#define MSR_P6_PERFCTR0 0xc1
#define MSR_P6_PERFCTR1 0xc2
+#define MSR_FSB_FREQ 0xcd
+
#define MSR_IA32_BBL_CR_CTL 0x119
@@ -130,6 +132,9 @@
#define MSR_IA32_PERF_STATUS 0x198
#define MSR_IA32_PERF_CTL 0x199
+#define MSR_IA32_MPERF 0xE7
+#define MSR_IA32_APERF 0xE8
+
#define MSR_IA32_THERM_CONTROL 0x19a
#define MSR_IA32_THERM_INTERRUPT 0x19b
#define MSR_IA32_THERM_STATUS 0x19c
diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h
index 952783d..3227bc9 100644
--- a/include/asm-x86_64/msr.h
+++ b/include/asm-x86_64/msr.h
@@ -189,6 +189,7 @@
#define MSR_IA32_PERFCTR0 0xc1
#define MSR_IA32_PERFCTR1 0xc2
+#define MSR_FSB_FREQ 0xcd
#define MSR_MTRRcap 0x0fe
#define MSR_IA32_BBL_CR_CTL 0x119
@@ -311,6 +312,9 @@
#define MSR_IA32_PERF_STATUS 0x198
#define MSR_IA32_PERF_CTL 0x199
+#define MSR_IA32_MPERF 0xE7
+#define MSR_IA32_APERF 0xE8
+
#define MSR_IA32_THERM_CONTROL 0x19a
#define MSR_IA32_THERM_INTERRUPT 0x19b
#define MSR_IA32_THERM_STATUS 0x19c
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 538423d..aca6698 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -40,7 +40,7 @@
#error no compiler-gcc.h file for this gcc version
#elif __GNUC__ == 4
# include <linux/compiler-gcc4.h>
-#elif __GNUC__ == 3
+#elif __GNUC__ == 3 && __GNUC_MINOR__ >= 2
# include <linux/compiler-gcc3.h>
#else
# error Sorry, your compiler is too old/not recognized.
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index a7f0150..fef6f3d 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -160,31 +160,6 @@
void (*drop_item)(struct config_group *group, struct config_item *item);
};
-
-
-/**
- * Use these macros to make defining attributes easier. See include/linux/device.h
- * for examples..
- */
-
-#if 0
-#define __ATTR(_name,_mode,_show,_store) { \
- .attr = {.ca_name = __stringify(_name), .ca_mode = _mode, .ca_owner = THIS_MODULE }, \
- .show = _show, \
- .store = _store, \
-}
-
-#define __ATTR_RO(_name) { \
- .attr = { .ca_name = __stringify(_name), .ca_mode = 0444, .ca_owner = THIS_MODULE }, \
- .show = _name##_show, \
-}
-
-#define __ATTR_NULL { .attr = { .name = NULL } }
-
-#define attr_name(_attr) (_attr).attr.name
-#endif
-
-
struct configfs_subsystem {
struct config_group su_group;
struct semaphore su_sem;
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 4ea39fe..7f008f6 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -172,6 +172,8 @@
unsigned int relation);
+extern int cpufreq_driver_getavg(struct cpufreq_policy *policy);
+
int cpufreq_register_governor(struct cpufreq_governor *governor);
void cpufreq_unregister_governor(struct cpufreq_governor *governor);
@@ -204,6 +206,7 @@
unsigned int (*get) (unsigned int cpu);
/* optional */
+ unsigned int (*getavg) (unsigned int cpu);
int (*exit) (struct cpufreq_policy *policy);
int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg);
int (*resume) (struct cpufreq_policy *policy);
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
index c8f8df2..937da70 100644
--- a/include/linux/i2c-algo-bit.h
+++ b/include/linux/i2c-algo-bit.h
@@ -26,9 +26,9 @@
/* --- Defines for bit-adapters --------------------------------------- */
/*
- * This struct contains the hw-dependent functions of bit-style adapters to
+ * This struct contains the hw-dependent functions of bit-style adapters to
* manipulate the line states, and to init any hw-specific features. This is
- * only used if you have more than one hw-type of adapter running.
+ * only used if you have more than one hw-type of adapter running.
*/
struct i2c_algo_bit_data {
void *data; /* private data for lowlevel routines */
@@ -44,6 +44,5 @@
};
int i2c_bit_add_bus(struct i2c_adapter *);
-int i2c_bit_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_BIT_H */
diff --git a/include/linux/i2c-algo-ite.h b/include/linux/i2c-algo-ite.h
deleted file mode 100644
index 0073fe9..0000000
--- a/include/linux/i2c-algo-ite.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-ite.h i2c driver algorithms for ITE IIC adapters */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 1995-97 Simon G. Vogl
- 1998-99 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
- Frodo Looijaard <frodol@dds.nl> */
-
-/* Modifications by MontaVista Software, 2001
- Changes made to support the ITE IIC peripheral */
-
-
-#ifndef I2C_ALGO_ITE_H
-#define I2C_ALGO_ITE_H 1
-
-#include <linux/types.h>
-
-/* Example of a sequential read request:
- struct i2c_iic_msg s_msg;
-
- s_msg.addr=device_address;
- s_msg.len=length;
- s_msg.buf=buffer;
- s_msg.waddr=word_address;
- ioctl(file,I2C_SREAD, &s_msg);
- */
-#define I2C_SREAD 0x780 /* SREAD ioctl command */
-
-struct i2c_iic_msg {
- __u16 addr; /* device address */
- __u16 waddr; /* word address */
- short len; /* msg length */
- char *buf; /* pointer to msg data */
-};
-
-#ifdef __KERNEL__
-struct i2c_adapter;
-
-struct i2c_algo_iic_data {
- void *data; /* private data for lolevel routines */
- void (*setiic) (void *data, int ctl, int val);
- int (*getiic) (void *data, int ctl);
- int (*getown) (void *data);
- int (*getclock) (void *data);
- void (*waitforpin) (void);
-
- /* local settings */
- int udelay;
- int mdelay;
- int timeout;
-};
-
-int i2c_iic_add_bus(struct i2c_adapter *);
-int i2c_iic_del_bus(struct i2c_adapter *);
-#endif /* __KERNEL__ */
-#endif /* I2C_ALGO_ITE_H */
diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h
index 226693e..fce47c0 100644
--- a/include/linux/i2c-algo-pca.h
+++ b/include/linux/i2c-algo-pca.h
@@ -10,6 +10,5 @@
};
int i2c_pca_add_bus(struct i2c_adapter *);
-int i2c_pca_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_PCA_H */
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
index 9908f3f..994eb86 100644
--- a/include/linux/i2c-algo-pcf.h
+++ b/include/linux/i2c-algo-pcf.h
@@ -31,7 +31,7 @@
int (*getpcf) (void *data, int ctl);
int (*getown) (void *data);
int (*getclock) (void *data);
- void (*waitforpin) (void);
+ void (*waitforpin) (void);
/* local settings */
int udelay;
@@ -39,6 +39,5 @@
};
int i2c_pcf_add_bus(struct i2c_adapter *);
-int i2c_pcf_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_PCF_H */
diff --git a/include/linux/i2c-algo-sgi.h b/include/linux/i2c-algo-sgi.h
index 4a0113d..3b77150 100644
--- a/include/linux/i2c-algo-sgi.h
+++ b/include/linux/i2c-algo-sgi.h
@@ -22,6 +22,5 @@
};
int i2c_sgi_add_bus(struct i2c_adapter *);
-int i2c_sgi_del_bus(struct i2c_adapter *);
#endif /* I2C_ALGO_SGI_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 0f4cf34..7ae3c332 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -1,7 +1,7 @@
/* ------------------------------------------------------------------------- */
-/* */
+/* */
/* i2c-id.h - identifier values for i2c drivers and adapters */
-/* */
+/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-1999 Simon G. Vogl
@@ -40,10 +40,10 @@
#define I2C_DRIVERID_SAA7120 11 /* video encoder */
#define I2C_DRIVERID_SAA7121 12 /* video encoder */
#define I2C_DRIVERID_SAA7185B 13 /* video encoder */
-#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
+#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
#define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */
#define I2C_DRIVERID_PCF8582C 16 /* eeprom */
-#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
+#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
#define I2C_DRIVERID_TEA6300 18 /* audio mixer */
#define I2C_DRIVERID_BT829 19 /* pc to tv encoder */
#define I2C_DRIVERID_TDA9850 20 /* audio mixer */
@@ -82,9 +82,8 @@
#define I2C_DRIVERID_STM41T00 52 /* real time clock */
#define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */
#define I2C_DRIVERID_ADV7170 54 /* video encoder */
-#define I2C_DRIVERID_RADEON 55 /* I2C bus on Radeon boards */
#define I2C_DRIVERID_MAX1617 56 /* temp sensor */
-#define I2C_DRIVERID_SAA7191 57 /* video encoder */
+#define I2C_DRIVERID_SAA7191 57 /* video decoder */
#define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */
#define I2C_DRIVERID_BT832 59 /* CMOS camera video processor */
#define I2C_DRIVERID_TDA9887 60 /* TDA988x IF-PLL demodulator */
@@ -132,7 +131,6 @@
#define I2C_DRIVERID_ADM1021 1008
#define I2C_DRIVERID_ADM9240 1009
#define I2C_DRIVERID_LTC1710 1010
-#define I2C_DRIVERID_ICSPLL 1012
#define I2C_DRIVERID_BT869 1013
#define I2C_DRIVERID_MAXILIFE 1014
#define I2C_DRIVERID_MATORB 1015
@@ -165,7 +163,7 @@
* ---- Adapter types ----------------------------------------------------
*/
-/* --- Bit algorithm adapters */
+/* --- Bit algorithm adapters */
#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
#define I2C_HW_B_SER 0x010002 /* Serial line interface */
#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
@@ -213,9 +211,6 @@
/* --- MPC8xx PowerPC adapters */
#define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */
-/* --- ITE based algorithms */
-#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */
-
/* --- PowerPC on-chip adapters */
#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
new file mode 100644
index 0000000..e6e9c81
--- /dev/null
+++ b/include/linux/i2c-pnx.h
@@ -0,0 +1,43 @@
+/*
+ * Header file for I2C support on PNX010x/4008.
+ *
+ * Author: Dennis Kovalev <dkovalev@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __I2C_PNX_H__
+#define __I2C_PNX_H__
+
+#include <asm/arch/i2c.h>
+
+struct i2c_pnx_mif {
+ int ret; /* Return value */
+ int mode; /* Interface mode */
+ struct completion complete; /* I/O completion */
+ struct timer_list timer; /* Timeout */
+ char * buf; /* Data buffer */
+ int len; /* Length of data buffer */
+};
+
+struct i2c_pnx_algo_data {
+ u32 base;
+ u32 ioaddr;
+ int irq;
+ struct i2c_pnx_mif mif;
+ int last;
+};
+
+struct i2c_pnx_data {
+ int (*suspend) (struct platform_device *pdev, pm_message_t state);
+ int (*resume) (struct platform_device *pdev);
+ u32 (*calculate_input_freq) (struct platform_device *pdev);
+ int (*set_clock_run) (struct platform_device *pdev);
+ int (*set_clock_stop) (struct platform_device *pdev);
+ struct i2c_adapter *adapter;
+};
+
+#endif /* __I2C_PNX_H__ */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 9b5d047..71e50d3 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -1,7 +1,7 @@
/* ------------------------------------------------------------------------- */
-/* */
+/* */
/* i2c.h - definitions for the i2c-bus interface */
-/* */
+/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-2000 Simon G. Vogl
@@ -27,7 +27,7 @@
#define _LINUX_I2C_H
#include <linux/types.h>
-#ifdef __KERNEL__
+#ifdef __KERNEL__
#include <linux/module.h>
#include <linux/i2c-id.h>
#include <linux/mod_devicetable.h>
@@ -53,8 +53,8 @@
/*
* The master routines are the ones normally used to transmit data to devices
- * on a bus (or read from them). Apart from two basic transfer functions to
- * transmit one message at a time, a more complex version can be used to
+ * on a bus (or read from them). Apart from two basic transfer functions to
+ * transmit one message at a time, a more complex version can be used to
* transmit an arbitrary number of messages without interruption.
*/
extern int i2c_master_send(struct i2c_client *,const char* ,int);
@@ -67,10 +67,10 @@
/* This is the very generalized SMBus access routine. You probably do not
want to use this, though; one of the functions below may be much easier,
- and probably just as fast.
+ and probably just as fast.
Note that we use i2c_adapter here, because you do not need a specific
smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
+extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
char read_write, u8 command, int size,
union i2c_smbus_data * data);
@@ -112,14 +112,14 @@
/* Notifies the driver that a new bus has appeared. This routine
* can be used by the driver to test if the bus meets its conditions
- * & seek for the presence of the chip(s) it supports. If found, it
+ * & seek for the presence of the chip(s) it supports. If found, it
* registers the client(s) that are on the bus to the i2c admin. via
* i2c_attach_client.
*/
int (*attach_adapter)(struct i2c_adapter *);
int (*detach_adapter)(struct i2c_adapter *);
- /* tells the driver that a client is about to be deleted & gives it
+ /* tells the driver that a client is about to be deleted & gives it
* the chance to remove its private data. Also, if the client struct
* has been dynamically allocated by the driver in the function above,
* it must be freed here.
@@ -139,13 +139,13 @@
#define I2C_NAME_SIZE 50
/*
- * i2c_client identifies a single device (i.e. chip) that is connected to an
+ * i2c_client identifies a single device (i.e. chip) that is connected to an
* i2c bus. The behaviour is defined by the routines of the driver. This
* function is mainly used for lookup & other admin. functions.
*/
struct i2c_client {
unsigned int flags; /* div., see below */
- unsigned short addr; /* chip address - NOTE: 7bit */
+ unsigned short addr; /* chip address - NOTE: 7bit */
/* addresses are stored in the */
/* _LOWER_ 7 bits */
struct i2c_adapter *adapter; /* the adapter we sit on */
@@ -182,14 +182,14 @@
*/
struct i2c_algorithm {
/* If an adapter algorithm can't do I2C-level access, set master_xfer
- to NULL. If an adapter algorithm can do SMBus access, set
+ to NULL. If an adapter algorithm can do SMBus access, set
smbus_xfer. If set to NULL, the SMBus protocol is simulated
using common I2C messages */
/* master_xfer should return the number of messages successfully
processed, or a negative value on error */
- int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
+ int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
int num);
- int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
+ int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data);
@@ -216,6 +216,7 @@
int (*client_unregister)(struct i2c_client *);
/* data fields that are valid for all devices */
+ u8 level; /* nesting level for lockdep */
struct mutex bus_lock;
struct mutex clist_lock;
@@ -316,7 +317,7 @@
* It will only call found_proc if some client is connected at the
* specific address (unless a 'force' matched);
*/
-extern int i2c_probe(struct i2c_adapter *adapter,
+extern int i2c_probe(struct i2c_adapter *adapter,
struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int));
@@ -352,15 +353,15 @@
*/
struct i2c_msg {
__u16 addr; /* slave address */
- __u16 flags;
+ __u16 flags;
#define I2C_M_TEN 0x10 /* we have a ten bit chip address */
#define I2C_M_RD 0x01
#define I2C_M_NOSTART 0x4000
#define I2C_M_REV_DIR_ADDR 0x2000
#define I2C_M_IGNORE_NAK 0x1000
#define I2C_M_NO_RD_ACK 0x0800
- __u16 len; /* msg length */
- __u8 *buf; /* pointer to msg data */
+ __u16 len; /* msg length */
+ __u8 *buf; /* pointer to msg data */
};
/* To determine what functionality is present */
@@ -370,16 +371,16 @@
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK 0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_QUICK 0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */
@@ -406,10 +407,10 @@
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
-/*
- * Data for SMBus Messages
+/*
+ * Data for SMBus Messages
*/
-#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
+#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
union i2c_smbus_data {
__u8 byte;
__u16 word;
@@ -421,11 +422,11 @@
#define I2C_SMBUS_READ 1
#define I2C_SMBUS_WRITE 0
-/* SMBus transaction types (size parameter in the above functions)
+/* SMBus transaction types (size parameter in the above functions)
Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
#define I2C_SMBUS_QUICK 0
#define I2C_SMBUS_BYTE 1
-#define I2C_SMBUS_BYTE_DATA 2
+#define I2C_SMBUS_BYTE_DATA 2
#define I2C_SMBUS_WORD_DATA 3
#define I2C_SMBUS_PROC_CALL 4
#define I2C_SMBUS_BLOCK_DATA 5
@@ -434,15 +435,15 @@
/* ----- commands for the ioctl like i2c_command call:
- * note that additional calls are defined in the algorithm and hw
- * dependent layers - these can be listed here, or see the
+ * note that additional calls are defined in the algorithm and hw
+ * dependent layers - these can be listed here, or see the
* corresponding header files.
*/
/* -> bit-adapter specific ioctls */
#define I2C_RETRIES 0x0701 /* number of times a device address */
/* should be polled when not */
- /* acknowledging */
-#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
+ /* acknowledging */
+#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
/* this is for i2c-dev.c */
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 6d8846e..81480e6 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -11,7 +11,7 @@
** the sysctl() binary interface. Do *NOT* change the
** numbering of any existing values here, and do not change
** any numbers within any one set of values. If you have to
- ** have to redefine an existing interface, use a new number for it.
+ ** redefine an existing interface, use a new number for it.
** The kernel will then return -ENOTDIR to any application using
** the old binary interface.
**
diff --git a/include/rdma/ib_marshall.h b/include/rdma/ib_marshall.h
index 66bf4d7..db03720 100644
--- a/include/rdma/ib_marshall.h
+++ b/include/rdma/ib_marshall.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2005 Intel Corporation. All rights reserved.
+ * Copyright (c) 2005-2006 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -41,6 +41,9 @@
void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
struct ib_qp_attr *src);
+void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
+ struct ib_ah_attr *src);
+
void ib_copy_path_rec_to_user(struct ib_user_path_rec *dst,
struct ib_sa_path_rec *src);
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 8eacc35..fd2353f 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -43,6 +43,8 @@
#include <linux/types.h>
#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <asm/atomic.h>
#include <asm/scatterlist.h>
@@ -848,6 +850,49 @@
u8 *lmc_cache;
};
+struct ib_dma_mapping_ops {
+ int (*mapping_error)(struct ib_device *dev,
+ u64 dma_addr);
+ u64 (*map_single)(struct ib_device *dev,
+ void *ptr, size_t size,
+ enum dma_data_direction direction);
+ void (*unmap_single)(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction);
+ u64 (*map_page)(struct ib_device *dev,
+ struct page *page, unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction);
+ void (*unmap_page)(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction);
+ int (*map_sg)(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction);
+ void (*unmap_sg)(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction);
+ u64 (*dma_address)(struct ib_device *dev,
+ struct scatterlist *sg);
+ unsigned int (*dma_len)(struct ib_device *dev,
+ struct scatterlist *sg);
+ void (*sync_single_for_cpu)(struct ib_device *dev,
+ u64 dma_handle,
+ size_t size,
+ enum dma_data_direction dir);
+ void (*sync_single_for_device)(struct ib_device *dev,
+ u64 dma_handle,
+ size_t size,
+ enum dma_data_direction dir);
+ void *(*alloc_coherent)(struct ib_device *dev,
+ size_t size,
+ u64 *dma_handle,
+ gfp_t flag);
+ void (*free_coherent)(struct ib_device *dev,
+ size_t size, void *cpu_addr,
+ u64 dma_handle);
+};
+
struct iw_cm_verbs;
struct ib_device {
@@ -992,6 +1037,8 @@
struct ib_mad *in_mad,
struct ib_mad *out_mad);
+ struct ib_dma_mapping_ops *dma_ops;
+
struct module *owner;
struct class_device class_dev;
struct kobject ports_parent;
@@ -1395,10 +1442,216 @@
* usable for DMA.
* @pd: The protection domain associated with the memory region.
* @mr_access_flags: Specifies the memory access rights.
+ *
+ * Note that the ib_dma_*() functions defined below must be used
+ * to create/destroy addresses used with the Lkey or Rkey returned
+ * by ib_get_dma_mr().
*/
struct ib_mr *ib_get_dma_mr(struct ib_pd *pd, int mr_access_flags);
/**
+ * ib_dma_mapping_error - check a DMA addr for error
+ * @dev: The device for which the dma_addr was created
+ * @dma_addr: The DMA address to check
+ */
+static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr)
+{
+ return dev->dma_ops ?
+ dev->dma_ops->mapping_error(dev, dma_addr) :
+ dma_mapping_error(dma_addr);
+}
+
+/**
+ * ib_dma_map_single - Map a kernel virtual address to DMA address
+ * @dev: The device for which the dma_addr is to be created
+ * @cpu_addr: The kernel virtual address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline u64 ib_dma_map_single(struct ib_device *dev,
+ void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ return dev->dma_ops ?
+ dev->dma_ops->map_single(dev, cpu_addr, size, direction) :
+ dma_map_single(dev->dma_device, cpu_addr, size, direction);
+}
+
+/**
+ * ib_dma_unmap_single - Destroy a mapping created by ib_dma_map_single()
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_single(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ dev->dma_ops ?
+ dev->dma_ops->unmap_single(dev, addr, size, direction) :
+ dma_unmap_single(dev->dma_device, addr, size, direction);
+}
+
+/**
+ * ib_dma_map_page - Map a physical page to DMA address
+ * @dev: The device for which the dma_addr is to be created
+ * @page: The page to be mapped
+ * @offset: The offset within the page
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline u64 ib_dma_map_page(struct ib_device *dev,
+ struct page *page,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ return dev->dma_ops ?
+ dev->dma_ops->map_page(dev, page, offset, size, direction) :
+ dma_map_page(dev->dma_device, page, offset, size, direction);
+}
+
+/**
+ * ib_dma_unmap_page - Destroy a mapping created by ib_dma_map_page()
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_page(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ dev->dma_ops ?
+ dev->dma_ops->unmap_page(dev, addr, size, direction) :
+ dma_unmap_page(dev->dma_device, addr, size, direction);
+}
+
+/**
+ * ib_dma_map_sg - Map a scatter/gather list to DMA addresses
+ * @dev: The device for which the DMA addresses are to be created
+ * @sg: The array of scatter/gather entries
+ * @nents: The number of scatter/gather entries
+ * @direction: The direction of the DMA
+ */
+static inline int ib_dma_map_sg(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ return dev->dma_ops ?
+ dev->dma_ops->map_sg(dev, sg, nents, direction) :
+ dma_map_sg(dev->dma_device, sg, nents, direction);
+}
+
+/**
+ * ib_dma_unmap_sg - Unmap a scatter/gather list of DMA addresses
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The array of scatter/gather entries
+ * @nents: The number of scatter/gather entries
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_sg(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ dev->dma_ops ?
+ dev->dma_ops->unmap_sg(dev, sg, nents, direction) :
+ dma_unmap_sg(dev->dma_device, sg, nents, direction);
+}
+
+/**
+ * ib_sg_dma_address - Return the DMA address from a scatter/gather entry
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The scatter/gather entry
+ */
+static inline u64 ib_sg_dma_address(struct ib_device *dev,
+ struct scatterlist *sg)
+{
+ return dev->dma_ops ?
+ dev->dma_ops->dma_address(dev, sg) : sg_dma_address(sg);
+}
+
+/**
+ * ib_sg_dma_len - Return the DMA length from a scatter/gather entry
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The scatter/gather entry
+ */
+static inline unsigned int ib_sg_dma_len(struct ib_device *dev,
+ struct scatterlist *sg)
+{
+ return dev->dma_ops ?
+ dev->dma_ops->dma_len(dev, sg) : sg_dma_len(sg);
+}
+
+/**
+ * ib_dma_sync_single_for_cpu - Prepare DMA region to be accessed by CPU
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @dir: The direction of the DMA
+ */
+static inline void ib_dma_sync_single_for_cpu(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ dev->dma_ops ?
+ dev->dma_ops->sync_single_for_cpu(dev, addr, size, dir) :
+ dma_sync_single_for_cpu(dev->dma_device, addr, size, dir);
+}
+
+/**
+ * ib_dma_sync_single_for_device - Prepare DMA region to be accessed by device
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @dir: The direction of the DMA
+ */
+static inline void ib_dma_sync_single_for_device(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ dev->dma_ops ?
+ dev->dma_ops->sync_single_for_device(dev, addr, size, dir) :
+ dma_sync_single_for_device(dev->dma_device, addr, size, dir);
+}
+
+/**
+ * ib_dma_alloc_coherent - Allocate memory and map it for DMA
+ * @dev: The device for which the DMA address is requested
+ * @size: The size of the region to allocate in bytes
+ * @dma_handle: A pointer for returning the DMA address of the region
+ * @flag: memory allocator flags
+ */
+static inline void *ib_dma_alloc_coherent(struct ib_device *dev,
+ size_t size,
+ u64 *dma_handle,
+ gfp_t flag)
+{
+ return dev->dma_ops ?
+ dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag) :
+ dma_alloc_coherent(dev->dma_device, size, dma_handle, flag);
+}
+
+/**
+ * ib_dma_free_coherent - Free memory allocated by ib_dma_alloc_coherent()
+ * @dev: The device for which the DMA addresses were allocated
+ * @size: The size of the region
+ * @cpu_addr: the address returned by ib_dma_alloc_coherent()
+ * @dma_handle: the DMA address returned by ib_dma_alloc_coherent()
+ */
+static inline void ib_dma_free_coherent(struct ib_device *dev,
+ size_t size, void *cpu_addr,
+ u64 dma_handle)
+{
+ dev->dma_ops ?
+ dev->dma_ops->free_coherent(dev, size, cpu_addr, dma_handle) :
+ dma_free_coherent(dev->dma_device, size, cpu_addr, dma_handle);
+}
+
+/**
* ib_reg_phys_mr - Prepares a virtually addressed memory region for use
* by an HCA.
* @pd: The protection domain associated assigned to the registered region.
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index deb5a0a..36cd8a8 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -77,11 +77,34 @@
int num_paths;
};
+struct rdma_conn_param {
+ const void *private_data;
+ u8 private_data_len;
+ u8 responder_resources;
+ u8 initiator_depth;
+ u8 flow_control;
+ u8 retry_count; /* ignored when accepting */
+ u8 rnr_retry_count;
+ /* Fields below ignored if a QP is created on the rdma_cm_id. */
+ u8 srq;
+ u32 qp_num;
+};
+
+struct rdma_ud_param {
+ const void *private_data;
+ u8 private_data_len;
+ struct ib_ah_attr ah_attr;
+ u32 qp_num;
+ u32 qkey;
+};
+
struct rdma_cm_event {
enum rdma_cm_event_type event;
int status;
- void *private_data;
- u8 private_data_len;
+ union {
+ struct rdma_conn_param conn;
+ struct rdma_ud_param ud;
+ } param;
};
struct rdma_cm_id;
@@ -204,25 +227,17 @@
int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr,
int *qp_attr_mask);
-struct rdma_conn_param {
- const void *private_data;
- u8 private_data_len;
- u8 responder_resources;
- u8 initiator_depth;
- u8 flow_control;
- u8 retry_count; /* ignored when accepting */
- u8 rnr_retry_count;
- /* Fields below ignored if a QP is created on the rdma_cm_id. */
- u8 srq;
- u32 qp_num;
- enum ib_qp_type qp_type;
-};
-
/**
* rdma_connect - Initiate an active connection request.
+ * @id: Connection identifier to connect.
+ * @conn_param: Connection information used for connected QPs.
*
* Users must have resolved a route for the rdma_cm_id to connect with
* by having called rdma_resolve_route before calling this routine.
+ *
+ * This call will either connect to a remote QP or obtain remote QP
+ * information for unconnected rdma_cm_id's. The actual operation is
+ * based on the rdma_cm_id's port space.
*/
int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
@@ -253,6 +268,21 @@
int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
/**
+ * rdma_notify - Notifies the RDMA CM of an asynchronous event that has
+ * occurred on the connection.
+ * @id: Connection identifier to transition to established.
+ * @event: Asynchronous event.
+ *
+ * This routine should be invoked by users to notify the CM of relevant
+ * communication events. Events that should be reported to the CM and
+ * when to report them are:
+ *
+ * IB_EVENT_COMM_EST - Used when a message is received on a connected
+ * QP before an RTU has been received.
+ */
+int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event);
+
+/**
* rdma_reject - Called to reject a connection request or response.
*/
int rdma_reject(struct rdma_cm_id *id, const void *private_data,
diff --git a/include/rdma/rdma_cm_ib.h b/include/rdma/rdma_cm_ib.h
index e8c3af1..9b176df 100644
--- a/include/rdma/rdma_cm_ib.h
+++ b/include/rdma/rdma_cm_ib.h
@@ -44,4 +44,7 @@
int rdma_set_ib_paths(struct rdma_cm_id *id,
struct ib_sa_path_rec *path_rec, int num_paths);
+/* Global qkey for UD QPs and multicast groups. */
+#define RDMA_UD_QKEY 0x01234567
+
#endif /* RDMA_CM_IB_H */
diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h
new file mode 100644
index 0000000..9572ab8
--- /dev/null
+++ b/include/rdma/rdma_user_cm.h
@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2005-2006 Intel Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef RDMA_USER_CM_H
+#define RDMA_USER_CM_H
+
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <rdma/ib_user_verbs.h>
+#include <rdma/ib_user_sa.h>
+
+#define RDMA_USER_CM_ABI_VERSION 3
+
+#define RDMA_MAX_PRIVATE_DATA 256
+
+enum {
+ RDMA_USER_CM_CMD_CREATE_ID,
+ RDMA_USER_CM_CMD_DESTROY_ID,
+ RDMA_USER_CM_CMD_BIND_ADDR,
+ RDMA_USER_CM_CMD_RESOLVE_ADDR,
+ RDMA_USER_CM_CMD_RESOLVE_ROUTE,
+ RDMA_USER_CM_CMD_QUERY_ROUTE,
+ RDMA_USER_CM_CMD_CONNECT,
+ RDMA_USER_CM_CMD_LISTEN,
+ RDMA_USER_CM_CMD_ACCEPT,
+ RDMA_USER_CM_CMD_REJECT,
+ RDMA_USER_CM_CMD_DISCONNECT,
+ RDMA_USER_CM_CMD_INIT_QP_ATTR,
+ RDMA_USER_CM_CMD_GET_EVENT,
+ RDMA_USER_CM_CMD_GET_OPTION,
+ RDMA_USER_CM_CMD_SET_OPTION,
+ RDMA_USER_CM_CMD_NOTIFY
+};
+
+/*
+ * command ABI structures.
+ */
+struct rdma_ucm_cmd_hdr {
+ __u32 cmd;
+ __u16 in;
+ __u16 out;
+};
+
+struct rdma_ucm_create_id {
+ __u64 uid;
+ __u64 response;
+ __u16 ps;
+ __u8 reserved[6];
+};
+
+struct rdma_ucm_create_id_resp {
+ __u32 id;
+};
+
+struct rdma_ucm_destroy_id {
+ __u64 response;
+ __u32 id;
+ __u32 reserved;
+};
+
+struct rdma_ucm_destroy_id_resp {
+ __u32 events_reported;
+};
+
+struct rdma_ucm_bind_addr {
+ __u64 response;
+ struct sockaddr_in6 addr;
+ __u32 id;
+};
+
+struct rdma_ucm_resolve_addr {
+ struct sockaddr_in6 src_addr;
+ struct sockaddr_in6 dst_addr;
+ __u32 id;
+ __u32 timeout_ms;
+};
+
+struct rdma_ucm_resolve_route {
+ __u32 id;
+ __u32 timeout_ms;
+};
+
+struct rdma_ucm_query_route {
+ __u64 response;
+ __u32 id;
+ __u32 reserved;
+};
+
+struct rdma_ucm_query_route_resp {
+ __u64 node_guid;
+ struct ib_user_path_rec ib_route[2];
+ struct sockaddr_in6 src_addr;
+ struct sockaddr_in6 dst_addr;
+ __u32 num_paths;
+ __u8 port_num;
+ __u8 reserved[3];
+};
+
+struct rdma_ucm_conn_param {
+ __u32 qp_num;
+ __u32 reserved;
+ __u8 private_data[RDMA_MAX_PRIVATE_DATA];
+ __u8 private_data_len;
+ __u8 srq;
+ __u8 responder_resources;
+ __u8 initiator_depth;
+ __u8 flow_control;
+ __u8 retry_count;
+ __u8 rnr_retry_count;
+ __u8 valid;
+};
+
+struct rdma_ucm_ud_param {
+ __u32 qp_num;
+ __u32 qkey;
+ struct ib_uverbs_ah_attr ah_attr;
+ __u8 private_data[RDMA_MAX_PRIVATE_DATA];
+ __u8 private_data_len;
+ __u8 reserved[7];
+};
+
+struct rdma_ucm_connect {
+ struct rdma_ucm_conn_param conn_param;
+ __u32 id;
+ __u32 reserved;
+};
+
+struct rdma_ucm_listen {
+ __u32 id;
+ __u32 backlog;
+};
+
+struct rdma_ucm_accept {
+ __u64 uid;
+ struct rdma_ucm_conn_param conn_param;
+ __u32 id;
+ __u32 reserved;
+};
+
+struct rdma_ucm_reject {
+ __u32 id;
+ __u8 private_data_len;
+ __u8 reserved[3];
+ __u8 private_data[RDMA_MAX_PRIVATE_DATA];
+};
+
+struct rdma_ucm_disconnect {
+ __u32 id;
+};
+
+struct rdma_ucm_init_qp_attr {
+ __u64 response;
+ __u32 id;
+ __u32 qp_state;
+};
+
+struct rdma_ucm_notify {
+ __u32 id;
+ __u32 event;
+};
+
+struct rdma_ucm_get_event {
+ __u64 response;
+};
+
+struct rdma_ucm_event_resp {
+ __u64 uid;
+ __u32 id;
+ __u32 event;
+ __u32 status;
+ union {
+ struct rdma_ucm_conn_param conn;
+ struct rdma_ucm_ud_param ud;
+ } param;
+};
+
+#endif /* RDMA_USER_CM_H */
diff --git a/init/Kconfig b/init/Kconfig
index 9edf103..f000edb 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -348,7 +348,7 @@
If unsure say Y here.
config KALLSYMS
- bool "Load all symbols for debugging/kksymoops" if EMBEDDED
+ bool "Load all symbols for debugging/ksymoops" if EMBEDDED
default y
help
Say Y here to let the kernel print out symbolic crash information and
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 0701ddd..818e458 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -437,7 +437,7 @@
Provide fault-injection capability for alloc_pages().
config FAIL_MAKE_REQUEST
- bool "Fault-injection capabilitiy for disk IO"
+ bool "Fault-injection capability for disk IO"
depends on FAULT_INJECTION
help
Provide fault-injection capability for disk IO.
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 74046ef..8ce00d3 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -565,7 +565,7 @@
} else {
struct sk_buff *free_it = next;
- /* Old fragmnet is completely overridden with
+ /* Old fragment is completely overridden with
* new one drop it.
*/
next = next->next;
diff --git a/sound/Kconfig b/sound/Kconfig
index 95949b6..9d77300 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -93,4 +93,12 @@
endif
+config AC97_BUS
+ tristate
+ help
+ This is used to avoid config and link hard dependencies between the
+ sound subsystem and other function drivers completely unrelated to
+ sound although they're sharing the AC97 bus. Concerned drivers
+ should "select" this.
+
endmenu
diff --git a/sound/Makefile b/sound/Makefile
index 5f6bef5..9aee54c 100644
--- a/sound/Makefile
+++ b/sound/Makefile
@@ -8,6 +8,9 @@
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/
obj-$(CONFIG_SND_AOA) += aoa/
+# This one must be compilable even if sound is configured out
+obj-$(CONFIG_AC97_BUS) += ac97_bus.o
+
ifeq ($(CONFIG_SND),y)
obj-y += last.o
endif
diff --git a/sound/pci/ac97/ac97_bus.c b/sound/ac97_bus.c
similarity index 100%
rename from sound/pci/ac97/ac97_bus.c
rename to sound/ac97_bus.c
diff --git a/sound/aoa/fabrics/Kconfig b/sound/aoa/fabrics/Kconfig
index c3bc770..50d7021 100644
--- a/sound/aoa/fabrics/Kconfig
+++ b/sound/aoa/fabrics/Kconfig
@@ -1,6 +1,6 @@
config SND_AOA_FABRIC_LAYOUT
tristate "layout-id fabric"
- depends SND_AOA
+ depends on SND_AOA
select SND_AOA_SOUNDBUS
select SND_AOA_SOUNDBUS_I2S
---help---
diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index 7971285..40ebd2f 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -26,11 +26,7 @@
config SND_AC97_CODEC
tristate
select SND_PCM
- select SND_AC97_BUS
-
-config SND_AC97_BUS
- tristate
-
+ select AC97_BUS
config SND_DUMMY
tristate "Dummy (/dev/null) soundcard"
diff --git a/sound/pci/ac97/Makefile b/sound/pci/ac97/Makefile
index 77b3482..3c32221 100644
--- a/sound/pci/ac97/Makefile
+++ b/sound/pci/ac97/Makefile
@@ -10,11 +10,9 @@
endif
snd-ak4531-codec-objs := ak4531_codec.o
-snd-ac97-bus-objs := ac97_bus.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AC97_CODEC) += snd-ac97-codec.o
obj-$(CONFIG_SND_ENS1370) += snd-ak4531-codec.o
-obj-$(CONFIG_SND_AC97_BUS) += snd-ac97-bus.o
obj-m := $(sort $(obj-m))