Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/i915: Fix unintended recursion in ironlake_disable_rc6
drm/i915: fix corruptions on i8xx due to relaxed fencing
drm/i915: skip FDI & PCH enabling for DP_A
agp/intel: Experiment with a 855GM GWB bit
drm/i915: don't enable FDI & transcoder interrupts after all
drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h
index c195bfe..5feebe2 100644
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@@ -130,6 +130,7 @@
#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4)
#define I915_IFPADDR 0x60
+#define I830_HIC 0x70
/* Intel 965G registers */
#define I965_MSAC 0x62
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index fab3d32..0d09b53 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/pagemap.h>
#include <linux/agp_backend.h>
+#include <linux/delay.h>
#include <asm/smp.h>
#include "agp.h"
#include "intel-agp.h"
@@ -70,12 +71,8 @@
u32 __iomem *gtt; /* I915G */
bool clear_fake_agp; /* on first access via agp, fill with scratch */
int num_dcache_entries;
- union {
- void __iomem *i9xx_flush_page;
- void *i8xx_flush_page;
- };
+ void __iomem *i9xx_flush_page;
char *i81x_gtt_table;
- struct page *i8xx_page;
struct resource ifp_resource;
int resource_valid;
struct page *scratch_page;
@@ -722,28 +719,6 @@
static void i830_cleanup(void)
{
- if (intel_private.i8xx_flush_page) {
- kunmap(intel_private.i8xx_flush_page);
- intel_private.i8xx_flush_page = NULL;
- }
-
- __free_page(intel_private.i8xx_page);
- intel_private.i8xx_page = NULL;
-}
-
-static void intel_i830_setup_flush(void)
-{
- /* return if we've already set the flush mechanism up */
- if (intel_private.i8xx_page)
- return;
-
- intel_private.i8xx_page = alloc_page(GFP_KERNEL);
- if (!intel_private.i8xx_page)
- return;
-
- intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page);
- if (!intel_private.i8xx_flush_page)
- i830_cleanup();
}
/* The chipset_flush interface needs to get data that has already been
@@ -758,14 +733,27 @@
*/
static void i830_chipset_flush(void)
{
- unsigned int *pg = intel_private.i8xx_flush_page;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
- memset(pg, 0, 1024);
+ /* Forcibly evict everything from the CPU write buffers.
+ * clflush appears to be insufficient.
+ */
+ wbinvd_on_all_cpus();
- if (cpu_has_clflush)
- clflush_cache_range(pg, 1024);
- else if (wbinvd_on_all_cpus() != 0)
- printk(KERN_ERR "Timed out waiting for cache flush.\n");
+ /* Now we've only seen documents for this magic bit on 855GM,
+ * we hope it exists for the other gen2 chipsets...
+ *
+ * Also works as advertised on my 845G.
+ */
+ writel(readl(intel_private.registers+I830_HIC) | (1<<31),
+ intel_private.registers+I830_HIC);
+
+ while (readl(intel_private.registers+I830_HIC) & (1<<31)) {
+ if (time_after(jiffies, timeout))
+ break;
+
+ udelay(50);
+ }
}
static void i830_write_entry(dma_addr_t addr, unsigned int entry,
@@ -849,8 +837,6 @@
intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE;
- intel_i830_setup_flush();
-
return 0;
}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 22a32b9..79a04fd 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -184,7 +184,7 @@
static bool
i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
{
- int tile_width;
+ int tile_width, tile_height;
/* Linear is always fine */
if (tiling_mode == I915_TILING_NONE)
@@ -215,6 +215,20 @@
}
}
+ if (IS_GEN2(dev) ||
+ (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
+ tile_height = 32;
+ else
+ tile_height = 8;
+ /* i8xx is strange: It has 2 interleaved rows of tiles, so needs an even
+ * number of tile rows. */
+ if (IS_GEN2(dev))
+ tile_height *= 2;
+
+ /* Size needs to be aligned to a full tile row */
+ if (size & (tile_height * stride - 1))
+ return false;
+
/* 965+ just needs multiples of tile width */
if (INTEL_INFO(dev)->gen >= 4) {
if (stride & (tile_width - 1))
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 97f946dc..8a9e08b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -316,6 +316,8 @@
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
+ DRM_DEBUG_KMS("running encoder hotplug functions\n");
+
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
if (encoder->hot_plug)
encoder->hot_plug(encoder);
@@ -1649,9 +1651,7 @@
} else {
hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
- hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK;
- I915_WRITE(FDI_RXA_IMR, 0);
- I915_WRITE(FDI_RXB_IMR, 0);
+ hotplug_mask |= SDE_AUX_MASK;
}
dev_priv->pch_irq_mask = ~hotplug_mask;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3b00653..e79b25b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1630,19 +1630,19 @@
struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
wait_event(dev_priv->pending_flip_queue,
+ atomic_read(&dev_priv->mm.wedged) ||
atomic_read(&obj->pending_flip) == 0);
/* Big Hammer, we also need to ensure that any pending
* MI_WAIT_FOR_EVENT inside a user batch buffer on the
* current scanout is retired before unpinning the old
* framebuffer.
+ *
+ * This should only fail upon a hung GPU, in which case we
+ * can safely continue.
*/
ret = i915_gem_object_flush_gpu(obj, false);
- if (ret) {
- i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
- mutex_unlock(&dev->struct_mutex);
- return ret;
- }
+ (void) ret;
}
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
@@ -2045,6 +2045,31 @@
atomic_read(&obj->pending_flip) == 0);
}
+static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
+
+ /*
+ * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
+ * must be driven by its own crtc; no sharing is possible.
+ */
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+ if (encoder->base.crtc != crtc)
+ continue;
+
+ switch (encoder->type) {
+ case INTEL_OUTPUT_EDP:
+ if (!intel_encoder_is_pch_edp(&encoder->base))
+ return false;
+ continue;
+ }
+ }
+
+ return true;
+}
+
static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -2053,6 +2078,7 @@
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
u32 reg, temp;
+ bool is_pch_port = false;
if (intel_crtc->active)
return;
@@ -2066,7 +2092,56 @@
I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
}
- ironlake_fdi_enable(crtc);
+ is_pch_port = intel_crtc_driving_pch(crtc);
+
+ if (is_pch_port)
+ ironlake_fdi_enable(crtc);
+ else {
+ /* disable CPU FDI tx and PCH FDI rx */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+ POSTING_READ(reg);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(0x7 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(100);
+
+ /* Ironlake workaround, disable clock pointer after downing FDI */
+ if (HAS_PCH_IBX(dev))
+ I915_WRITE(FDI_RX_CHICKEN(pipe),
+ I915_READ(FDI_RX_CHICKEN(pipe) &
+ ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+
+ /* still set train pattern 1 */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ }
+ /* BPC in FDI rx is consistent with that in PIPECONF */
+ temp &= ~(0x07 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(100);
+ }
/* Enable panel fitting for LVDS */
if (dev_priv->pch_pf_size &&
@@ -2100,6 +2175,10 @@
intel_flush_display_plane(dev, plane);
}
+ /* Skip the PCH stuff if possible */
+ if (!is_pch_port)
+ goto done;
+
/* For PCH output, training FDI link */
if (IS_GEN6(dev))
gen6_fdi_link_train(crtc);
@@ -2184,7 +2263,7 @@
I915_WRITE(reg, temp | TRANS_ENABLE);
if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
DRM_ERROR("failed to enable transcoder %d\n", pipe);
-
+done:
intel_crtc_load_lut(crtc);
intel_update_fbc(dev);
intel_crtc_update_cursor(crtc, true);
@@ -6496,7 +6575,7 @@
POSTING_READ(RSTDBYCTL);
}
- ironlake_disable_rc6(dev);
+ ironlake_teardown_rc6(dev);
}
static int ironlake_setup_rc6(struct drm_device *dev)