| /* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* SPM controlled regulators: */ |
| |
| &spmi_bus { |
| qcom,pm8226@1 { |
| pm8226_s2: spm-regulator@1700 { |
| compatible = "qcom,spm-regulator"; |
| regulator-name = "8226_s2"; |
| reg = <0x1700 0x100>; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1350000>; |
| qcom,mode = "auto"; |
| }; |
| }; |
| }; |
| |
| /* CPR controlled regulator */ |
| |
| &soc { |
| apc_vreg_corner: regulator@f9018000 { |
| status = "okay"; |
| compatible = "qcom,cpr-regulator"; |
| reg = <0xf9018000 0x1000>, <0xf9011064 4>, <0xfc4b8000 0x1000>; |
| reg-names = "rbcpr", "rbcpr_clk", "efuse_addr"; |
| interrupts = <0 15 0>; |
| regulator-name = "apc_corner"; |
| |
| qcom,pvs-fuse-redun-sel = <22 24 3 2 0>; |
| qcom,pvs-fuse = <22 6 5 0>; |
| qcom,pvs-fuse-redun = <22 27 5 0>; |
| |
| qcom,pvs-voltage-table = |
| <1050000 1150000 1350000>, |
| <1050000 1150000 1340000>, |
| <1050000 1150000 1330000>, |
| <1050000 1150000 1320000>, |
| <1050000 1150000 1310000>, |
| <1050000 1150000 1300000>, |
| <1050000 1150000 1290000>, |
| <1050000 1150000 1280000>, |
| <1050000 1150000 1270000>, |
| <1050000 1140000 1260000>, |
| <1050000 1130000 1250000>, |
| <1050000 1120000 1240000>, |
| <1050000 1110000 1230000>, |
| <1050000 1100000 1220000>, |
| <1050000 1090000 1210000>, |
| <1050000 1080000 1200000>, |
| <1050000 1070000 1190000>, |
| <1050000 1060000 1180000>, |
| <1050000 1050000 1170000>, |
| <1050000 1050000 1160000>, |
| <1050000 1050000 1150000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>, |
| <1050000 1050000 1140000>; |
| qcom,cpr-voltage-ceiling = <1050000 1150000 1280000>; |
| qcom,cpr-voltage-floor = <1050000 1050000 1100000>; |
| vdd-apc-supply = <&pm8226_s2>; |
| |
| vdd-mx-supply = <&pm8226_l3_ao>; |
| qcom,vdd-mx-vmax = <1350000>; |
| qcom,vdd-mx-vmin-method = <1>; |
| |
| qcom,cpr-ref-clk = <19200>; |
| qcom,cpr-timer-delay = <5000>; |
| qcom,cpr-timer-cons-up = <0>; |
| qcom,cpr-timer-cons-down = <2>; |
| qcom,cpr-irq-line = <0>; |
| qcom,cpr-step-quotient = <30>; |
| qcom,cpr-idle-clocks = <0>; |
| qcom,cpr-gcnt-time = <1>; |
| qcom,vdd-apc-step-up-limit = <1>; |
| qcom,vdd-apc-step-down-limit = <1>; |
| qcom,cpr-apc-volt-step = <10000>; |
| |
| qcom,cpr-fuse-redun-sel = <138 57 1 1 0>; |
| qcom,cpr-fuse-row = <138 0>; |
| qcom,cpr-fuse-bp-cpr-disable = <36>; |
| qcom,cpr-fuse-bp-scheme = <37>; |
| qcom,cpr-fuse-target-quot = <24 12 0>; |
| qcom,cpr-fuse-ro-sel = <54 38 41>; |
| qcom,cpr-fuse-redun-row = <139 0>; |
| qcom,cpr-fuse-redun-target-quot = <24 12 0>; |
| qcom,cpr-fuse-redun-ro-sel = <46 36 39>; |
| |
| qcom,cpr-enable; |
| qcom,cpr-fuse-cond-min-volt-sel = <54 42 6 7 1>; |
| qcom,cpr-cond-min-voltage = <1140000>; |
| qcom,cpr-fuse-uplift-sel = <22 53 1 0 0>; |
| qcom,cpr-uplift-voltage = <50000>; |
| qcom,cpr-uplift-quotient = <0 0 120>; |
| qcom,cpr-uplift-max-volt = <1350000>; |
| qcom,cpr-uplift-speed-bin = <1>; |
| qcom,speed-bin-fuse-sel = <22 0 3 0>; |
| }; |
| }; |
| |
| /* RPM controlled regulators: */ |
| |
| &rpm_bus { |
| rpm-regulator-smpa1 { |
| status = "okay"; |
| pm8226_s1: regulator-s1 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1275000>; |
| status = "okay"; |
| }; |
| pm8226_s1_corner: regulator-s1-corner { |
| compatible = "qcom,rpm-regulator-smd"; |
| regulator-name = "8226_s1_corner"; |
| qcom,set = <3>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| qcom,use-voltage-corner; |
| qcom,consumer-supplies = "vdd_dig", ""; |
| }; |
| pm8226_s1_corner_ao: regulator-s1-corner-ao { |
| compatible = "qcom,rpm-regulator-smd"; |
| regulator-name = "8226_s1_corner_ao"; |
| qcom,set = <1>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| qcom,use-voltage-corner; |
| qcom,consumer-supplies = "vdd_sr2_dig", ""; |
| }; |
| pm8226_s1_floor_corner: regulator-s1-floor-corner { |
| compatible = "qcom,rpm-regulator-smd"; |
| regulator-name = "8226_s1_floor_corner"; |
| qcom,set = <3>; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| qcom,use-voltage-floor-corner; |
| qcom,always-send-voltage; |
| }; |
| }; |
| |
| rpm-regulator-smpa3 { |
| status = "okay"; |
| pm8226_s3: regulator-s3 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,init-voltage = <1200000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-smpa4 { |
| status = "okay"; |
| pm8226_s4: regulator-s4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2200000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-smpa5 { |
| status = "okay"; |
| pm8226_s5: regulator-s5 { |
| regulator-min-microvolt = <1150000>; |
| regulator-max-microvolt = <1150000>; |
| qcom,init-voltage = <1150000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa1 { |
| status = "okay"; |
| pm8226_l1: regulator-l1 { |
| regulator-name = "8226_l1"; |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| qcom,init-voltage = <1225000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa2 { |
| status = "okay"; |
| pm8226_l2: regulator-l2 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa3 { |
| status = "okay"; |
| pm8226_l3: regulator-l3 { |
| regulator-name = "8226_l3"; |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1337500>; |
| status = "okay"; |
| }; |
| pm8226_l3_ao: regulator-3-ao { |
| compatible = "qcom,rpm-regulator-smd"; |
| regulator-name = "8226_l3_ao"; |
| qcom,set = <1>; |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1337500>; |
| status = "okay"; |
| }; |
| pm8226_l3_so: regulator-l3-so { |
| compatible = "qcom,rpm-regulator-smd"; |
| regulator-name = "8226_l3_so"; |
| qcom,set = <2>; |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1337500>; |
| qcom,init-voltage = <750000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa4 { |
| status = "okay"; |
| pm8226_l4: regulator-l4 { |
| regulator-name = "8226_l4"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa5 { |
| status = "okay"; |
| pm8226_l5: regulator-l5 { |
| regulator-name = "8226_l5"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa6 { |
| status = "okay"; |
| pm8226_l6: regulator-l6 { |
| regulator-name = "8226_l6"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa7 { |
| status = "okay"; |
| pm8226_l7: regulator-l7 { |
| regulator-name = "8226_l7"; |
| regulator-min-microvolt = <1850000>; |
| regulator-max-microvolt = <1850000>; |
| qcom,init-voltage = <1850000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa8 { |
| status = "okay"; |
| pm8226_l8: regulator-l8 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| |
| pm8226_l8_ao: regulator-l8-ao { |
| compatible = "qcom,rpm-regulator-smd"; |
| regulator-name = "8226_l8_ao"; |
| qcom,set = <1>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,consumer-supplies = "vdd_sr2_pll", ""; |
| }; |
| |
| pm8226_l8_so: regulator-l8-so { |
| compatible = "qcom,rpm-regulator-smd"; |
| regulator-name = "8226_l8_so"; |
| qcom,set = <2>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-enable = <0>; |
| }; |
| }; |
| |
| rpm-regulator-ldoa9 { |
| status = "okay"; |
| pm8226_l9: regulator-l9 { |
| regulator-name = "8226_l9"; |
| regulator-min-microvolt = <2050000>; |
| regulator-max-microvolt = <2050000>; |
| qcom,init-voltage = <2050000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa10 { |
| status = "okay"; |
| pm8226_l10: regulator-l10 { |
| regulator-name = "8226_l10"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa12 { |
| status = "okay"; |
| pm8226_l12: regulator-l12 { |
| regulator-name = "8226_l12"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa14 { |
| status = "okay"; |
| pm8226_l14: regulator-l14 { |
| regulator-name = "8226_l14"; |
| regulator-min-microvolt = <2750000>; |
| regulator-max-microvolt = <2750000>; |
| qcom,init-voltage = <2750000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa15 { |
| status = "okay"; |
| pm8226_l15: regulator-l15 { |
| regulator-name = "8226_l15"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| qcom,init-voltage = <2800000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa16 { |
| status = "okay"; |
| pm8226_l16: regulator-l16 { |
| regulator-name = "8226_l16"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3350000>; |
| qcom,init-voltage = <3300000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa17 { |
| status = "okay"; |
| pm8226_l17: regulator-l17 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <2950000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa18 { |
| status = "okay"; |
| pm8226_l18: regulator-l18 { |
| regulator-name = "8226_l18"; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <2950000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa19 { |
| status = "okay"; |
| pm8226_l19: regulator-l19 { |
| regulator-name = "8226_l19"; |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| qcom,init-voltage = <2850000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa20 { |
| status = "okay"; |
| pm8226_l20: regulator-l20 { |
| regulator-name = "8226_l20"; |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| qcom,init-voltage = <3075000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa21 { |
| status = "okay"; |
| pm8226_l21: regulator-l21 { |
| regulator-name = "8226_l21"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <2950000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa22 { |
| status = "okay"; |
| pm8226_l22: regulator-l22 { |
| regulator-name = "8226_l22"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <2950000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa23 { |
| status = "okay"; |
| pm8226_l23: regulator-l23 { |
| regulator-name = "8226_l23"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <2950000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa24 { |
| status = "okay"; |
| pm8226_l24: regulator-l24 { |
| regulator-name = "8226_l24"; |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1350000>; |
| qcom,init-voltage = <1300000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa25 { |
| status = "okay"; |
| pm8226_l25: regulator-l25 { |
| regulator-name = "8226_l25"; |
| regulator-min-microvolt = <1775000>; |
| regulator-max-microvolt = <2125000>; |
| qcom,init-voltage = <1775000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa26 { |
| status = "okay"; |
| pm8226_l26: regulator-l26 { |
| regulator-name = "8226_l26"; |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| qcom,init-voltage = <1225000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa27 { |
| status = "okay"; |
| pm8226_l27: regulator-l27 { |
| regulator-name = "8226_l27"; |
| regulator-min-microvolt = <2050000>; |
| regulator-max-microvolt = <2050000>; |
| qcom,init-voltage = <2050000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-ldoa28 { |
| status = "okay"; |
| pm8226_l28: regulator-l28 { |
| regulator-name = "8226_l28"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| qcom,init-voltage = <2950000>; |
| status = "okay"; |
| }; |
| }; |
| |
| rpm-regulator-vsa1 { |
| status = "okay"; |
| pm8226_lvs1: regulator-lvs1 { |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| &pm8226_chg_boost { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-name = "8226_smbbp_boost"; |
| }; |
| |
| &pm8226_chg { |
| otg-parent-supply = <&pm8226_chg_boost>; |
| }; |
| |
| &pm8226_chg_batif { |
| regulator-name = "batfet"; |
| }; |
| |
| &pm8226_chg_otg { |
| regulator-name = "8226_smbbp_otg"; |
| }; |