| /* |
| * Sonics Silicon Backplane |
| * Broadcom USB-core OHCI driver |
| * |
| * Copyright 2007 Michael Buesch <mb@bu3sch.de> |
| * |
| * Derived from the OHCI-PCI driver |
| * Copyright 1999 Roman Weissgaerber |
| * Copyright 2000-2002 David Brownell |
| * Copyright 1999 Linus Torvalds |
| * Copyright 1999 Gregory P. Smith |
| * |
| * Derived from the USBcore related parts of Broadcom-SB |
| * Copyright 2005 Broadcom Corporation |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| #include <linux/ssb/ssb.h> |
| |
| |
| #define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) |
| |
| struct ssb_ohci_device { |
| struct ohci_hcd ohci; /* _must_ be at the beginning. */ |
| |
| u32 enable_flags; |
| }; |
| |
| static inline |
| struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd) |
| { |
| return (struct ssb_ohci_device *)(hcd->hcd_priv); |
| } |
| |
| |
| static int ssb_ohci_reset(struct usb_hcd *hcd) |
| { |
| struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); |
| struct ohci_hcd *ohci = &ohcidev->ohci; |
| int err; |
| |
| ohci_hcd_init(ohci); |
| err = ohci_init(ohci); |
| |
| return err; |
| } |
| |
| static int ssb_ohci_start(struct usb_hcd *hcd) |
| { |
| struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); |
| struct ohci_hcd *ohci = &ohcidev->ohci; |
| int err; |
| |
| err = ohci_run(ohci); |
| if (err < 0) { |
| ohci_err(ohci, "can't start\n"); |
| ohci_stop(hcd); |
| } |
| |
| return err; |
| } |
| |
| static const struct hc_driver ssb_ohci_hc_driver = { |
| .description = "ssb-usb-ohci", |
| .product_desc = "SSB OHCI Controller", |
| .hcd_priv_size = sizeof(struct ssb_ohci_device), |
| |
| .irq = ohci_irq, |
| .flags = HCD_MEMORY | HCD_USB11, |
| |
| .reset = ssb_ohci_reset, |
| .start = ssb_ohci_start, |
| .stop = ohci_stop, |
| .shutdown = ohci_shutdown, |
| |
| .urb_enqueue = ohci_urb_enqueue, |
| .urb_dequeue = ohci_urb_dequeue, |
| .endpoint_disable = ohci_endpoint_disable, |
| |
| .get_frame_number = ohci_get_frame, |
| |
| .hub_status_data = ohci_hub_status_data, |
| .hub_control = ohci_hub_control, |
| #ifdef CONFIG_PM |
| .bus_suspend = ohci_bus_suspend, |
| .bus_resume = ohci_bus_resume, |
| #endif |
| |
| .start_port_reset = ohci_start_port_reset, |
| }; |
| |
| static void ssb_ohci_detach(struct ssb_device *dev) |
| { |
| struct usb_hcd *hcd = ssb_get_drvdata(dev); |
| |
| usb_remove_hcd(hcd); |
| iounmap(hcd->regs); |
| usb_put_hcd(hcd); |
| ssb_device_disable(dev, 0); |
| } |
| |
| static int ssb_ohci_attach(struct ssb_device *dev) |
| { |
| struct ssb_ohci_device *ohcidev; |
| struct usb_hcd *hcd; |
| int err = -ENOMEM; |
| u32 tmp, flags = 0; |
| |
| if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) |
| flags |= SSB_OHCI_TMSLOW_HOSTMODE; |
| |
| ssb_device_enable(dev, flags); |
| |
| hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, |
| dev->dev->bus_id); |
| if (!hcd) |
| goto err_dev_disable; |
| ohcidev = hcd_to_ssb_ohci(hcd); |
| ohcidev->enable_flags = flags; |
| |
| tmp = ssb_read32(dev, SSB_ADMATCH0); |
| hcd->rsrc_start = ssb_admatch_base(tmp); |
| hcd->rsrc_len = ssb_admatch_size(tmp); |
| hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); |
| if (!hcd->regs) |
| goto err_put_hcd; |
| err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); |
| if (err) |
| goto err_iounmap; |
| |
| ssb_set_drvdata(dev, hcd); |
| |
| return err; |
| |
| err_iounmap: |
| iounmap(hcd->regs); |
| err_put_hcd: |
| usb_put_hcd(hcd); |
| err_dev_disable: |
| ssb_device_disable(dev, flags); |
| return err; |
| } |
| |
| static int ssb_ohci_probe(struct ssb_device *dev, |
| const struct ssb_device_id *id) |
| { |
| int err; |
| u16 chipid_top; |
| |
| /* USBcores are only connected on embedded devices. */ |
| chipid_top = (dev->bus->chip_id & 0xFF00); |
| if (chipid_top != 0x4700 && chipid_top != 0x5300) |
| return -ENODEV; |
| |
| /* TODO: Probably need checks here; is the core connected? */ |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| /* We currently always attach SSB_DEV_USB11_HOSTDEV |
| * as HOST OHCI. If we want to attach it as Client device, |
| * we must branch here and call into the (yet to |
| * be written) Client mode driver. Same for remove(). */ |
| |
| err = ssb_ohci_attach(dev); |
| |
| return err; |
| } |
| |
| static void ssb_ohci_remove(struct ssb_device *dev) |
| { |
| ssb_ohci_detach(dev); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state) |
| { |
| ssb_device_disable(dev, 0); |
| |
| return 0; |
| } |
| |
| static int ssb_ohci_resume(struct ssb_device *dev) |
| { |
| struct usb_hcd *hcd = ssb_get_drvdata(dev); |
| struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); |
| |
| ssb_device_enable(dev, ohcidev->enable_flags); |
| |
| ohci_finish_controller_resume(hcd); |
| return 0; |
| } |
| |
| #else /* !CONFIG_PM */ |
| #define ssb_ohci_suspend NULL |
| #define ssb_ohci_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| static const struct ssb_device_id ssb_ohci_table[] = { |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), |
| SSB_DEVTABLE_END |
| }; |
| MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); |
| |
| static struct ssb_driver ssb_ohci_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = ssb_ohci_table, |
| .probe = ssb_ohci_probe, |
| .remove = ssb_ohci_remove, |
| .suspend = ssb_ohci_suspend, |
| .resume = ssb_ohci_resume, |
| }; |