| /* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| &spmi_bus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| |
| &pm8941_lsid0 { |
| spmi-slave-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pm8941_misc: qcom,misc@900 { |
| compatible = "qcom,qpnp-misc"; |
| reg = <0x900 0x100>; |
| }; |
| |
| qcom,revid@100 { |
| compatible = "qcom,qpnp-revid"; |
| reg = <0x100 0x100>; |
| }; |
| |
| qcom,temp-alarm@2400 { |
| compatible = "qcom,qpnp-temp-alarm"; |
| reg = <0x2400 0x100>; |
| interrupts = <0x0 0x24 0x0>; |
| label = "pm8941_tz"; |
| qcom,channel-num = <8>; |
| qcom,threshold-set = <0>; |
| qcom,temp_alarm-vadc = <&pm8941_vadc>; |
| }; |
| |
| qcom,power-on@800 { |
| compatible = "qcom,qpnp-power-on"; |
| reg = <0x800 0x100>; |
| interrupts = <0x0 0x8 0x0>, |
| <0x0 0x8 0x1>, |
| <0x0 0x8 0x4>, |
| <0x0 0x8 0x5>; |
| interrupt-names = "kpdpwr", "resin", |
| "resin-bark", "kpdpwr-resin-bark"; |
| qcom,pon-dbc-delay = <15625>; |
| qcom,system-reset; |
| qcom,s3-debounce = <32>; |
| |
| qcom,pon_1 { |
| qcom,pon-type = <0>; |
| qcom,pull-up = <1>; |
| linux,code = <116>; |
| }; |
| |
| qcom,pon_2 { |
| qcom,pon-type = <1>; |
| qcom,support-reset = <1>; |
| qcom,pull-up = <1>; |
| qcom,s1-timer = <0>; |
| qcom,s2-timer = <2000>; |
| qcom,s2-type = <1>; |
| linux,code = <114>; |
| }; |
| |
| qcom,pon_3 { |
| qcom,pon-type = <3>; |
| qcom,support-reset = <1>; |
| qcom,s1-timer = <6720>; |
| qcom,s2-timer = <2000>; |
| qcom,s2-type = <7>; |
| qcom,pull-up = <1>; |
| }; |
| }; |
| |
| bif_ctrl: qcom,bsi@1b00 { |
| compatible = "qcom,qpnp-bsi"; |
| reg = <0x1b00 0x100>, |
| <0x1208 0x1>; |
| reg-names = "bsi-base", "batt-id-status"; |
| label = "pm8941-bsi"; |
| interrupts = <0x0 0x1b 0x0>, |
| <0x0 0x1b 0x1>, |
| <0x0 0x1b 0x2>, |
| <0x0 0x12 0x0>; |
| interrupt-names = "err", |
| "rx", |
| "tx", |
| "batt-present"; |
| qcom,channel-num = <0x31>; |
| qcom,pullup-ohms = <100000>; |
| qcom,vref-microvolts = <1800000>; |
| qcom,min-clock-period = <1000>; |
| qcom,max-clock-period = <160000>; |
| qcom,sample-rate = <4>; |
| qcom,bsi-vadc = <&pm8941_vadc>; |
| }; |
| |
| pm8941_coincell: qcom,coincell@2800 { |
| compatible = "qcom,qpnp-coincell"; |
| reg = <0x2800 0x100>; |
| }; |
| |
| pm8941_bms: qcom,bms { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-bms"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "disabled"; |
| |
| qcom,r-sense-uohm = <10000>; |
| qcom,v-cutoff-uv = <3400000>; |
| qcom,max-voltage-uv = <4200000>; |
| qcom,r-conn-mohm = <0>; |
| qcom,shutdown-soc-valid-limit = <100>; |
| qcom,adjust-soc-low-threshold = <15>; |
| qcom,ocv-voltage-high-threshold-uv = <3750000>; |
| qcom,ocv-voltage-low-threshold-uv = <3650000>; |
| qcom,low-soc-calculate-soc-threshold = <15>; |
| qcom,low-soc-calculate-soc-ms = <5000>; |
| qcom,calculate-soc-ms = <20000>; |
| qcom,chg-term-ua = <100000>; |
| qcom,batt-type = <0>; |
| qcom,low-voltage-threshold = <3420000>; |
| qcom,tm-temp-margin = <5000>; |
| qcom,low-ocv-correction-limit-uv = <100>; |
| qcom,high-ocv-correction-limit-uv = <50>; |
| qcom,hold-soc-est = <3>; |
| qcom,bms-vadc = <&pm8941_vadc>; |
| qcom,bms-iadc = <&pm8941_iadc>; |
| qcom,bms-adc_tm = <&pm8941_adc_tm>; |
| |
| qcom,bms-iadc@3800 { |
| reg = <0x3800 0x100>; |
| }; |
| |
| qcom,bms-bms@4000 { |
| reg = <0x4000 0x100>; |
| interrupts = <0x0 0x40 0x0>, |
| <0x0 0x40 0x1>, |
| <0x0 0x40 0x2>, |
| <0x0 0x40 0x3>, |
| <0x0 0x40 0x4>, |
| <0x0 0x40 0x5>, |
| <0x0 0x40 0x6>, |
| <0x0 0x40 0x7>; |
| |
| interrupt-names = "cc_thr", |
| "ocv_for_r", |
| "good_ocv", |
| "charge_begin", |
| "ocv_thr", |
| "sw_cc_thr", |
| "vsense_avg", |
| "vsense_for_r"; |
| }; |
| }; |
| |
| clkdiv@5b00 { |
| reg = <0x5b00 0x100>; |
| compatible = "qcom,qpnp-clkdiv"; |
| qcom,cxo-freq = <19200000>; |
| }; |
| |
| clkdiv@5c00 { |
| reg = <0x5c00 0x100>; |
| compatible = "qcom,qpnp-clkdiv"; |
| qcom,cxo-freq = <19200000>; |
| }; |
| |
| clkdiv@5d00 { |
| reg = <0x5d00 0x1000>; |
| compatible = "qcom,qpnp-clkdiv"; |
| qcom,cxo-freq = <19200000>; |
| }; |
| |
| pm8941_chg: qcom,charger { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-charger"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "disabled"; |
| |
| qcom,vddmax-mv = <4200>; |
| qcom,vddsafe-mv = <4230>; |
| qcom,vinmin-mv = <4300>; |
| qcom,ibatmax-ma = <1500>; |
| qcom,ibatterm-ma = <100>; |
| qcom,ibatsafe-ma = <1500>; |
| qcom,thermal-mitigation = <1500 700 600 325>; |
| qcom,cool-bat-decidegc = <100>; |
| qcom,cool-bat-mv = <4100>; |
| qcom,ibatmax-warm-ma = <350>; |
| qcom,warm-bat-decidegc = <450>; |
| qcom,warm-bat-mv = <4100>; |
| qcom,ibatmax-cool-ma = <350>; |
| qcom,vbatdet-delta-mv = <100>; |
| qcom,resume-soc = <99>; |
| qcom,tchg-mins = <150>; |
| qcom,chg-vadc = <&pm8941_vadc>; |
| qcom,chg-adc_tm = <&pm8941_adc_tm>; |
| |
| qcom,chgr@1000 { |
| status = "disabled"; |
| reg = <0x1000 0x100>; |
| interrupts = <0x0 0x10 0x0>, |
| <0x0 0x10 0x1>, |
| <0x0 0x10 0x2>, |
| <0x0 0x10 0x3>, |
| <0x0 0x10 0x4>, |
| <0x0 0x10 0x5>, |
| <0x0 0x10 0x6>, |
| <0x0 0x10 0x7>; |
| |
| interrupt-names = "vbat-det-lo", |
| "vbat-det-hi", |
| "chgwdog", |
| "state-change", |
| "trkl-chg-on", |
| "fast-chg-on", |
| "chg-failed", |
| "chg-done"; |
| }; |
| |
| qcom,buck@1100 { |
| status = "disabled"; |
| reg = <0x1100 0x100>; |
| interrupts = <0x0 0x11 0x0>, |
| <0x0 0x11 0x1>, |
| <0x0 0x11 0x2>, |
| <0x0 0x11 0x3>, |
| <0x0 0x11 0x4>, |
| <0x0 0x11 0x5>, |
| <0x0 0x11 0x6>; |
| |
| interrupt-names = "vbat-ov", |
| "vreg-ov", |
| "overtemp", |
| "vchg-loop", |
| "ichg-loop", |
| "ibat-loop", |
| "vdd-loop"; |
| }; |
| |
| pm8941_chg_batif: qcom,bat-if@1200 { |
| status = "disabled"; |
| reg = <0x1200 0x100>; |
| interrupts = <0x0 0x12 0x0>, |
| <0x0 0x12 0x1>, |
| <0x0 0x12 0x2>, |
| <0x0 0x12 0x3>, |
| <0x0 0x12 0x4>; |
| |
| interrupt-names = "batt-pres", |
| "bat-temp-ok", |
| "bat-fet-on", |
| "vcp-on", |
| "psi"; |
| |
| }; |
| |
| pm8941_chg_otg: qcom,usb-chgpth@1300 { |
| status = "disabled"; |
| reg = <0x1300 0x100>; |
| interrupts = <0 0x13 0x0>, |
| <0 0x13 0x1>, |
| <0x0 0x13 0x2>; |
| |
| interrupt-names = "coarse-det-usb", |
| "usbin-valid", |
| "chg-gone"; |
| }; |
| |
| qcom,dc-chgpth@1400 { |
| status = "disabled"; |
| reg = <0x1400 0x100>; |
| interrupts = <0x0 0x14 0x0>, |
| <0x0 0x14 0x1>; |
| |
| interrupt-names = "coarse-det-dc", |
| "dcin-valid"; |
| }; |
| |
| pm8941_chg_boost: qcom,boost@1500 { |
| status = "disabled"; |
| reg = <0x1500 0x100>; |
| interrupts = <0x0 0x15 0x0>, |
| <0x0 0x15 0x1>; |
| |
| interrupt-names = "boost-pwr-ok", |
| "limit-error"; |
| }; |
| |
| qcom,chg-misc@1600 { |
| status = "disabled"; |
| reg = <0x1600 0x100>; |
| }; |
| }; |
| |
| pm8941_gpios: gpios { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-pin"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| label = "pm8941-gpio"; |
| |
| gpio@c000 { |
| reg = <0xc000 0x100>; |
| qcom,pin-num = <1>; |
| }; |
| |
| gpio@c100 { |
| reg = <0xc100 0x100>; |
| qcom,pin-num = <2>; |
| }; |
| |
| gpio@c200 { |
| reg = <0xc200 0x100>; |
| qcom,pin-num = <3>; |
| }; |
| |
| gpio@c300 { |
| reg = <0xc300 0x100>; |
| qcom,pin-num = <4>; |
| }; |
| |
| gpio@c400 { |
| reg = <0xc400 0x100>; |
| qcom,pin-num = <5>; |
| }; |
| |
| gpio@c500 { |
| reg = <0xc500 0x100>; |
| qcom,pin-num = <6>; |
| }; |
| |
| gpio@c600 { |
| reg = <0xc600 0x100>; |
| qcom,pin-num = <7>; |
| }; |
| |
| gpio@c700 { |
| reg = <0xc700 0x100>; |
| qcom,pin-num = <8>; |
| }; |
| |
| gpio@c800 { |
| reg = <0xc800 0x100>; |
| qcom,pin-num = <9>; |
| }; |
| |
| gpio@c900 { |
| reg = <0xc900 0x100>; |
| qcom,pin-num = <10>; |
| }; |
| |
| gpio@ca00 { |
| reg = <0xca00 0x100>; |
| qcom,pin-num = <11>; |
| }; |
| |
| gpio@cb00 { |
| reg = <0xcb00 0x100>; |
| qcom,pin-num = <12>; |
| }; |
| |
| gpio@cc00 { |
| reg = <0xcc00 0x100>; |
| qcom,pin-num = <13>; |
| }; |
| |
| gpio@cd00 { |
| reg = <0xcd00 0x100>; |
| qcom,pin-num = <14>; |
| }; |
| |
| gpio@ce00 { |
| reg = <0xce00 0x100>; |
| qcom,pin-num = <15>; |
| }; |
| |
| gpio@cf00 { |
| reg = <0xcf00 0x100>; |
| qcom,pin-num = <16>; |
| }; |
| |
| gpio@d000 { |
| reg = <0xd000 0x100>; |
| qcom,pin-num = <17>; |
| }; |
| |
| gpio@d100 { |
| reg = <0xd100 0x100>; |
| qcom,pin-num = <18>; |
| }; |
| |
| gpio@d200 { |
| reg = <0xd200 0x100>; |
| qcom,pin-num = <19>; |
| }; |
| |
| gpio@d300 { |
| reg = <0xd300 0x100>; |
| qcom,pin-num = <20>; |
| }; |
| |
| gpio@d400 { |
| reg = <0xd400 0x100>; |
| qcom,pin-num = <21>; |
| }; |
| |
| gpio@d500 { |
| reg = <0xd500 0x100>; |
| qcom,pin-num = <22>; |
| }; |
| |
| gpio@d600 { |
| reg = <0xd600 0x100>; |
| qcom,pin-num = <23>; |
| }; |
| |
| gpio@d700 { |
| reg = <0xd700 0x100>; |
| qcom,pin-num = <24>; |
| }; |
| |
| gpio@d800 { |
| reg = <0xd800 0x100>; |
| qcom,pin-num = <25>; |
| }; |
| |
| gpio@d900 { |
| reg = <0xd900 0x100>; |
| qcom,pin-num = <26>; |
| }; |
| |
| gpio@da00 { |
| reg = <0xda00 0x100>; |
| qcom,pin-num = <27>; |
| }; |
| |
| gpio@db00 { |
| reg = <0xdb00 0x100>; |
| qcom,pin-num = <28>; |
| }; |
| |
| gpio@dc00 { |
| reg = <0xdc00 0x100>; |
| qcom,pin-num = <29>; |
| }; |
| |
| gpio@dd00 { |
| reg = <0xdd00 0x100>; |
| qcom,pin-num = <30>; |
| }; |
| |
| gpio@de00 { |
| reg = <0xde00 0x100>; |
| qcom,pin-num = <31>; |
| }; |
| |
| gpio@df00 { |
| reg = <0xdf00 0x100>; |
| qcom,pin-num = <32>; |
| }; |
| |
| gpio@e000 { |
| reg = <0xe000 0x100>; |
| qcom,pin-num = <33>; |
| }; |
| |
| gpio@e100 { |
| reg = <0xe100 0x100>; |
| qcom,pin-num = <34>; |
| }; |
| |
| gpio@e200 { |
| reg = <0xe200 0x100>; |
| qcom,pin-num = <35>; |
| }; |
| |
| gpio@e300 { |
| reg = <0xe300 0x100>; |
| qcom,pin-num = <36>; |
| }; |
| }; |
| |
| pm8941_mpps: mpps { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-pin"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| label = "pm8941-mpp"; |
| |
| mpp@a000 { |
| reg = <0xa000 0x100>; |
| qcom,pin-num = <1>; |
| }; |
| |
| mpp@a100 { |
| reg = <0xa100 0x100>; |
| qcom,pin-num = <2>; |
| }; |
| |
| mpp@a200 { |
| reg = <0xa200 0x100>; |
| qcom,pin-num = <3>; |
| }; |
| |
| mpp@a300 { |
| reg = <0xa300 0x100>; |
| qcom,pin-num = <4>; |
| }; |
| |
| mpp@a400 { |
| reg = <0xa400 0x100>; |
| qcom,pin-num = <5>; |
| }; |
| |
| mpp@a500 { |
| reg = <0xa500 0x100>; |
| qcom,pin-num = <6>; |
| }; |
| |
| mpp@a600 { |
| reg = <0xa600 0x100>; |
| qcom,pin-num = <7>; |
| }; |
| |
| mpp@a700 { |
| reg = <0xa700 0x100>; |
| qcom,pin-num = <8>; |
| }; |
| }; |
| |
| qcom,pm8941_rtc { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-rtc"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,qpnp-rtc-write = <0>; |
| qcom,qpnp-rtc-alarm-pwrup = <0>; |
| |
| qcom,pm8941_rtc_rw@6000 { |
| reg = <0x6000 0x100>; |
| }; |
| qcom,pm8941_rtc_alarm@6100 { |
| reg = <0x6100 0x100>; |
| interrupts = <0x0 0x61 0x1>; |
| }; |
| }; |
| |
| pm8941_vadc: vadc@3100 { |
| compatible = "qcom,qpnp-vadc"; |
| reg = <0x3100 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x31 0x0>; |
| interrupt-names = "eoc-int-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1800>; |
| qcom,vadc-poll-eoc; |
| |
| chan@0 { |
| label = "usb_in"; |
| reg = <0>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <4>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@1 { |
| label = "dc_in"; |
| reg = <1>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <4>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@2 { |
| label = "vchg_sns"; |
| reg = <2>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <3>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@3 { |
| label = "spare1_div3"; |
| reg = <3>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@4 { |
| label = "usb_id_mv"; |
| reg = <4>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@5 { |
| label = "vcoin"; |
| reg = <5>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@6 { |
| label = "vbat_sns"; |
| reg = <6>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@7 { |
| label = "vph_pwr"; |
| reg = <7>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@8 { |
| label = "die_temp"; |
| reg = <8>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <3>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@9 { |
| label = "ref_625mv"; |
| reg = <9>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@a { |
| label = "ref_1250v"; |
| reg = <0xa>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@30 { |
| label = "batt_therm"; |
| reg = <0x30>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <1>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@31 { |
| label = "batt_id"; |
| reg = <0x31>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@b2 { |
| label = "xo_therm_pu2"; |
| reg = <0xb2>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@b3 { |
| label = "msm_therm"; |
| reg = <0xb3>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@b4 { |
| label = "emmc_therm"; |
| reg = <0xb4>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@b5 { |
| label = "pa_therm0"; |
| reg = <0xb5>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@b7 { |
| label = "pa_therm1"; |
| reg = <0xb7>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@b8 { |
| label = "quiet_therm"; |
| reg = <0xb8>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@b9 { |
| label = "usb_id"; |
| reg = <0xb9>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@39 { |
| label = "usb_id_nopull"; |
| reg = <0x39>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| }; |
| |
| pm8941_iadc: iadc@3600 { |
| compatible = "qcom,qpnp-iadc"; |
| reg = <0x3600 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x36 0x0>; |
| interrupt-names = "eoc-int-en-set"; |
| qcom,adc-bit-resolution = <16>; |
| qcom,adc-vdd-reference = <1800>; |
| qcom,iadc-vadc = <&pm8941_vadc>; |
| qcom,iadc-poll-eoc; |
| |
| chan@0 { |
| label = "internal_rsense"; |
| reg = <0>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| }; |
| |
| pm8941_adc_tm: qcom,vadc@3400 { |
| compatible = "qcom,qpnp-adc-tm"; |
| reg = <0x3400 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x34 0x0>, |
| <0x0 0x34 0x3>, |
| <0x0 0x34 0x4>; |
| interrupt-names = "eoc-int-en-set", |
| "high-thr-en-set", |
| "low-thr-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1800>; |
| qcom,adc_tm-vadc = <&pm8941_vadc>; |
| |
| /* Channel Node */ |
| chan@b9 { |
| label = "usb_id"; |
| reg = <0xb9>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <3>; |
| qcom,btm-channel-number = <0x48>; |
| }; |
| |
| chan@30 { |
| label = "batt_therm"; |
| reg = <0x30>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <1>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <3>; |
| qcom,btm-channel-number = <0x68>; |
| }; |
| |
| chan@8 { |
| label = "die_temp"; |
| reg = <8>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <3>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <3>; |
| qcom,btm-channel-number = <0x70>; |
| }; |
| |
| chan@6 { |
| label = "vbat_sns"; |
| reg = <6>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <3>; |
| qcom,btm-channel-number = <0x78>; |
| }; |
| |
| chan@b5 { |
| label = "pa_therm0"; |
| reg = <0xb5>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <3>; |
| qcom,btm-channel-number = <0x80>; |
| qcom,thermal-node; |
| }; |
| |
| chan@b7 { |
| label = "pa_therm1"; |
| reg = <0xb7>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <3>; |
| qcom,btm-channel-number = <0x88>; |
| qcom,thermal-node; |
| }; |
| |
| chan@b4 { |
| label = "emmc_therm"; |
| reg = <0xb4>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <3>; |
| qcom,btm-channel-number = <0x90>; |
| qcom,thermal-node; |
| }; |
| |
| chan@b3 { |
| label = "msm_therm"; |
| reg = <0xb3>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <3>; |
| qcom,btm-channel-number = <0x98>; |
| qcom,thermal-node; |
| }; |
| }; |
| }; |
| |
| &pm8941_lsid1 { |
| spmi-slave-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| regulator@1400 { |
| regulator-name = "8941_s1"; |
| spmi-dev-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,qpnp-regulator"; |
| reg = <0x1400 0x300>; |
| status = "disabled"; |
| |
| qcom,ctl@1400 { |
| reg = <0x1400 0x100>; |
| }; |
| qcom,ps@1500 { |
| reg = <0x1500 0x100>; |
| }; |
| qcom,freq@1600 { |
| reg = <0x1600 0x100>; |
| }; |
| }; |
| |
| regulator@1700 { |
| regulator-name = "8941_s2"; |
| spmi-dev-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,qpnp-regulator"; |
| reg = <0x1700 0x300>; |
| status = "disabled"; |
| |
| qcom,ctl@1700 { |
| reg = <0x1700 0x100>; |
| }; |
| qcom,ps@1800 { |
| reg = <0x1800 0x100>; |
| }; |
| qcom,freq@1900 { |
| reg = <0x1900 0x100>; |
| }; |
| }; |
| |
| regulator@1a00 { |
| regulator-name = "8941_s3"; |
| spmi-dev-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,qpnp-regulator"; |
| reg = <0x1a00 0x300>; |
| status = "disabled"; |
| |
| qcom,ctl@1a00 { |
| reg = <0x1a00 0x100>; |
| }; |
| qcom,ps@1b00 { |
| reg = <0x1b00 0x100>; |
| }; |
| qcom,freq@1c00 { |
| reg = <0x1c00 0x100>; |
| }; |
| }; |
| |
| regulator@a000 { |
| regulator-name = "8941_boost"; |
| reg = <0xa000 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4000 { |
| regulator-name = "8941_l1"; |
| reg = <0x4000 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4100 { |
| regulator-name = "8941_l2"; |
| reg = <0x4100 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4200 { |
| regulator-name = "8941_l3"; |
| reg = <0x4200 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4300 { |
| regulator-name = "8941_l4"; |
| reg = <0x4300 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4400 { |
| regulator-name = "8941_l5"; |
| reg = <0x4400 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| qcom,force-type = <0x04 0x10>; |
| status = "disabled"; |
| }; |
| |
| regulator@4500 { |
| regulator-name = "8941_l6"; |
| reg = <0x4500 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4600 { |
| regulator-name = "8941_l7"; |
| reg = <0x4600 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| qcom,force-type = <0x04 0x10>; |
| status = "disabled"; |
| }; |
| |
| regulator@4700 { |
| regulator-name = "8941_l8"; |
| reg = <0x4700 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4800 { |
| regulator-name = "8941_l9"; |
| reg = <0x4800 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4900 { |
| regulator-name = "8941_l10"; |
| reg = <0x4900 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4a00 { |
| regulator-name = "8941_l11"; |
| reg = <0x4a00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4b00 { |
| regulator-name = "8941_l12"; |
| reg = <0x4b00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4c00 { |
| regulator-name = "8941_l13"; |
| reg = <0x4c00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4d00 { |
| regulator-name = "8941_l14"; |
| reg = <0x4d00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4e00 { |
| regulator-name = "8941_l15"; |
| reg = <0x4e00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4f00 { |
| regulator-name = "8941_l16"; |
| reg = <0x4f00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@5000 { |
| regulator-name = "8941_l17"; |
| reg = <0x5000 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@5100 { |
| regulator-name = "8941_l18"; |
| reg = <0x5100 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@5200 { |
| regulator-name = "8941_l19"; |
| reg = <0x5200 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@5300 { |
| regulator-name = "8941_l20"; |
| reg = <0x5300 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@5400 { |
| regulator-name = "8941_l21"; |
| reg = <0x5400 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@5500 { |
| regulator-name = "8941_l22"; |
| reg = <0x5500 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@5600 { |
| regulator-name = "8941_l23"; |
| reg = <0x5600 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@5700 { |
| regulator-name = "8941_l24"; |
| reg = <0x5700 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@8000 { |
| regulator-name = "8941_lvs1"; |
| reg = <0x8000 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@8100 { |
| regulator-name = "8941_lvs2"; |
| reg = <0x8100 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@8200 { |
| regulator-name = "8941_lvs3"; |
| reg = <0x8200 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@8300 { |
| regulator-name = "8941_mvs1"; |
| reg = <0x8300 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@8400 { |
| regulator-name = "8941_mvs2"; |
| reg = <0x8400 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| qcom,vibrator@c000 { |
| compatible = "qcom,qpnp-vibrator"; |
| reg = <0xc000 0x100>; |
| label = "vibrator"; |
| status = "disabled"; |
| }; |
| |
| qcom,leds@d000 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd000 0x100>; |
| label = "rgb"; |
| }; |
| |
| qcom,leds@d100 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd100 0x100>; |
| label = "rgb"; |
| }; |
| |
| qcom,leds@d200 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd200 0x100>; |
| label = "rgb"; |
| }; |
| |
| qcom,leds@d300 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd300 0x100>; |
| label = "flash"; |
| flash-boost-supply = <&pm8941_chg_boost>; |
| torch-boost-supply = <&pm8941_boost>; |
| }; |
| |
| qcom,leds@d400 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd400 0x100>; |
| label = "flash"; |
| }; |
| |
| qcom,leds@d500 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd500 0x100>; |
| label = "flash"; |
| }; |
| |
| qcom,leds@d600 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd600 0x100>; |
| label = "flash"; |
| }; |
| |
| qcom,leds@d700 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd700 0x100>; |
| label = "flash"; |
| }; |
| |
| qcom,leds@d800 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd800 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@d900 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xd900 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@da00 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xda00 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@db00 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xdb00 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@dc00 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xdc00 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@dd00 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xdd00 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@de00 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xde00 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@df00 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xdf00 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@e000 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xe000 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@e100 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xe100 0x100>; |
| label = "wled"; |
| }; |
| |
| qcom,leds@e200 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xe200 0x100>; |
| label = "kpdbl"; |
| }; |
| |
| pwm@b100 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb100 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <0>; |
| }; |
| |
| pwm@b200 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb200 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <1>; |
| }; |
| |
| pwm@b300 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb300 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <2>; |
| }; |
| |
| pwm@b400 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb400 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <3>; |
| }; |
| |
| pwm@b500 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb500 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <4>; |
| }; |
| |
| pwm@b600 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb600 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <5>; |
| }; |
| |
| pwm@b700 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb700 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <6>; |
| }; |
| |
| pwm@b800 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb800 0x100>, |
| <0xb042 0x7e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <7>; |
| }; |
| |
| pwm@e400 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xe400 0x100>, |
| <0xe342 0x1e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <8>; |
| }; |
| |
| pwm@e500 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xe500 0x100>, |
| <0xe342 0x1e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <9>; |
| }; |
| |
| pwm@e600 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xe600 0x100>, |
| <0xe342 0x1e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <10>; |
| }; |
| |
| pwm@e700 { |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xe700 0x100>, |
| <0xe342 0x1e>; |
| reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base"; |
| qcom,channel-id = <11>; |
| }; |
| }; |