| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/mfd/pm8xxx/pm8921.h> |
| #include <linux/mfd/pm8xxx/pm8xxx-adc.h> |
| #include <linux/leds.h> |
| #include <linux/leds-pm8xxx.h> |
| #include <linux/msm_ssbi.h> |
| #include <asm/mach-types.h> |
| #include <mach/msm_bus_board.h> |
| #include <mach/restart.h> |
| #include "devices.h" |
| #include "board-8960.h" |
| |
| struct pm8xxx_gpio_init { |
| unsigned gpio; |
| struct pm_gpio config; |
| }; |
| |
| struct pm8xxx_mpp_init { |
| unsigned mpp; |
| struct pm8xxx_mpp_config_data config; |
| }; |
| |
| #define PM8XXX_GPIO_INIT(_gpio, _dir, _buf, _val, _pull, _vin, _out_strength, \ |
| _func, _inv, _disable) \ |
| { \ |
| .gpio = PM8921_GPIO_PM_TO_SYS(_gpio), \ |
| .config = { \ |
| .direction = _dir, \ |
| .output_buffer = _buf, \ |
| .output_value = _val, \ |
| .pull = _pull, \ |
| .vin_sel = _vin, \ |
| .out_strength = _out_strength, \ |
| .function = _func, \ |
| .inv_int_pol = _inv, \ |
| .disable_pin = _disable, \ |
| } \ |
| } |
| |
| #define PM8XXX_MPP_INIT(_mpp, _type, _level, _control) \ |
| { \ |
| .mpp = PM8921_MPP_PM_TO_SYS(_mpp), \ |
| .config = { \ |
| .type = PM8XXX_MPP_TYPE_##_type, \ |
| .level = _level, \ |
| .control = PM8XXX_MPP_##_control, \ |
| } \ |
| } |
| |
| #define PM8XXX_GPIO_DISABLE(_gpio) \ |
| PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, 0, 0, 0, PM_GPIO_VIN_S4, \ |
| 0, 0, 0, 1) |
| |
| #define PM8XXX_GPIO_OUTPUT(_gpio, _val) \ |
| PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \ |
| PM_GPIO_PULL_NO, PM_GPIO_VIN_S4, \ |
| PM_GPIO_STRENGTH_HIGH, \ |
| PM_GPIO_FUNC_NORMAL, 0, 0) |
| |
| #define PM8XXX_GPIO_INPUT(_gpio, _pull) \ |
| PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, PM_GPIO_OUT_BUF_CMOS, 0, \ |
| _pull, PM_GPIO_VIN_S4, \ |
| PM_GPIO_STRENGTH_NO, \ |
| PM_GPIO_FUNC_NORMAL, 0, 0) |
| |
| #define PM8XXX_GPIO_OUTPUT_FUNC(_gpio, _val, _func) \ |
| PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \ |
| PM_GPIO_PULL_NO, PM_GPIO_VIN_S4, \ |
| PM_GPIO_STRENGTH_HIGH, \ |
| _func, 0, 0) |
| |
| #define PM8XXX_GPIO_OUTPUT_VIN(_gpio, _val, _vin) \ |
| PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \ |
| PM_GPIO_PULL_NO, _vin, \ |
| PM_GPIO_STRENGTH_HIGH, \ |
| PM_GPIO_FUNC_NORMAL, 0, 0) |
| |
| /* Initial PM8921 GPIO configurations */ |
| static struct pm8xxx_gpio_init pm8921_gpios[] __initdata = { |
| PM8XXX_GPIO_OUTPUT_VIN(6, 1, PM_GPIO_VIN_VPH), /* MHL power EN_N */ |
| PM8XXX_GPIO_DISABLE(7), /* Disable NFC */ |
| PM8XXX_GPIO_INPUT(16, PM_GPIO_PULL_UP_30), /* SD_CARD_WP */ |
| /* External regulator shared by display and touchscreen on LiQUID */ |
| PM8XXX_GPIO_OUTPUT(17, 0), /* DISP 3.3 V Boost */ |
| PM8XXX_GPIO_OUTPUT_VIN(21, 1, PM_GPIO_VIN_VPH), /* Backlight Enable */ |
| PM8XXX_GPIO_DISABLE(22), /* Disable NFC */ |
| PM8XXX_GPIO_OUTPUT_FUNC(24, 0, PM_GPIO_FUNC_2), /* Bl: Off, PWM mode */ |
| PM8XXX_GPIO_OUTPUT_FUNC(25, 0, PM_GPIO_FUNC_2), /* TN_CLK */ |
| PM8XXX_GPIO_INPUT(26, PM_GPIO_PULL_UP_30), /* SD_CARD_DET_N */ |
| PM8XXX_GPIO_OUTPUT(43, PM_GPIO_PULL_UP_30), /* DISP_RESET_N */ |
| PM8XXX_GPIO_OUTPUT(42, 0), /* USB 5V reg enable */ |
| }; |
| |
| /* Initial PM8921 MPP configurations */ |
| static struct pm8xxx_mpp_init pm8921_mpps[] __initdata = { |
| /* External 5V regulator enable; shared by HDMI and USB_OTG switches. */ |
| PM8XXX_MPP_INIT(7, D_INPUT, PM8921_MPP_DIG_LEVEL_VPH, DIN_TO_INT), |
| PM8XXX_MPP_INIT(PM8XXX_AMUX_MPP_8, A_INPUT, PM8XXX_MPP_AIN_AMUX_CH8, |
| DOUT_CTRL_LOW), |
| }; |
| |
| void __init msm8960_pm8921_gpio_mpp_init(void) |
| { |
| int i, rc; |
| |
| for (i = 0; i < ARRAY_SIZE(pm8921_gpios); i++) { |
| rc = pm8xxx_gpio_config(pm8921_gpios[i].gpio, |
| &pm8921_gpios[i].config); |
| if (rc) { |
| pr_err("%s: pm8xxx_gpio_config: rc=%d\n", __func__, rc); |
| break; |
| } |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(pm8921_mpps); i++) { |
| rc = pm8xxx_mpp_config(pm8921_mpps[i].mpp, |
| &pm8921_mpps[i].config); |
| if (rc) { |
| pr_err("%s: pm8xxx_mpp_config: rc=%d\n", __func__, rc); |
| break; |
| } |
| } |
| } |
| |
| static struct pm8xxx_adc_amux pm8xxx_adc_channels_data[] = { |
| {"vcoin", CHANNEL_VCOIN, CHAN_PATH_SCALING2, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"vbat", CHANNEL_VBAT, CHAN_PATH_SCALING2, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"dcin", CHANNEL_DCIN, CHAN_PATH_SCALING4, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"ichg", CHANNEL_ICHG, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"vph_pwr", CHANNEL_VPH_PWR, CHAN_PATH_SCALING2, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"ibat", CHANNEL_IBAT, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"batt_therm", CHANNEL_BATT_THERM, CHAN_PATH_SCALING1, AMUX_RSV2, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_BATT_THERM}, |
| {"batt_id", CHANNEL_BATT_ID, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"usbin", CHANNEL_USBIN, CHAN_PATH_SCALING3, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"pmic_therm", CHANNEL_DIE_TEMP, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_PMIC_THERM}, |
| {"625mv", CHANNEL_625MV, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"125v", CHANNEL_125V, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"chg_temp", CHANNEL_CHG_TEMP, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT}, |
| {"pa_therm1", ADC_MPP_1_AMUX8, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_PA_THERM}, |
| {"xo_therm", CHANNEL_MUXOFF, CHAN_PATH_SCALING1, AMUX_RSV0, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_XOTHERM}, |
| {"pa_therm0", ADC_MPP_1_AMUX3, CHAN_PATH_SCALING1, AMUX_RSV1, |
| ADC_DECIMATION_TYPE2, ADC_SCALE_PA_THERM}, |
| }; |
| |
| static struct pm8xxx_adc_properties pm8xxx_adc_data = { |
| .adc_vdd_reference = 1800, /* milli-voltage for this adc */ |
| .bitresolution = 15, |
| .bipolar = 0, |
| }; |
| |
| static struct pm8xxx_adc_platform_data pm8xxx_adc_pdata = { |
| .adc_channel = pm8xxx_adc_channels_data, |
| .adc_num_board_channel = ARRAY_SIZE(pm8xxx_adc_channels_data), |
| .adc_prop = &pm8xxx_adc_data, |
| .adc_mpp_base = PM8921_MPP_PM_TO_SYS(1), |
| }; |
| |
| static struct pm8xxx_irq_platform_data pm8xxx_irq_pdata __devinitdata = { |
| .irq_base = PM8921_IRQ_BASE, |
| .devirq = MSM_GPIO_TO_INT(104), |
| .irq_trigger_flag = IRQF_TRIGGER_LOW, |
| }; |
| |
| static struct pm8xxx_gpio_platform_data pm8xxx_gpio_pdata __devinitdata = { |
| .gpio_base = PM8921_GPIO_PM_TO_SYS(1), |
| }; |
| |
| static struct pm8xxx_mpp_platform_data pm8xxx_mpp_pdata __devinitdata = { |
| .mpp_base = PM8921_MPP_PM_TO_SYS(1), |
| }; |
| |
| static struct pm8xxx_rtc_platform_data pm8xxx_rtc_pdata __devinitdata = { |
| .rtc_write_enable = false, |
| .rtc_alarm_powerup = false, |
| }; |
| |
| static struct pm8xxx_pwrkey_platform_data pm8xxx_pwrkey_pdata = { |
| .pull_up = 1, |
| .kpd_trigger_delay_us = 15625, |
| .wakeup = 1, |
| }; |
| |
| /* Rotate lock key is not available so use F1 */ |
| #define KEY_ROTATE_LOCK KEY_F1 |
| |
| static const unsigned int keymap_liquid[] = { |
| KEY(0, 0, KEY_VOLUMEUP), |
| KEY(0, 1, KEY_VOLUMEDOWN), |
| KEY(1, 3, KEY_ROTATE_LOCK), |
| KEY(1, 4, KEY_HOME), |
| }; |
| |
| static struct matrix_keymap_data keymap_data_liquid = { |
| .keymap_size = ARRAY_SIZE(keymap_liquid), |
| .keymap = keymap_liquid, |
| }; |
| |
| static struct pm8xxx_keypad_platform_data keypad_data_liquid = { |
| .input_name = "keypad_8960_liquid", |
| .input_phys_device = "keypad_8960/input0", |
| .num_rows = 2, |
| .num_cols = 5, |
| .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9), |
| .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1), |
| .debounce_ms = 15, |
| .scan_delay_ms = 32, |
| .row_hold_ns = 91500, |
| .wakeup = 1, |
| .keymap_data = &keymap_data_liquid, |
| }; |
| |
| |
| static const unsigned int keymap[] = { |
| KEY(0, 0, KEY_VOLUMEUP), |
| KEY(0, 1, KEY_VOLUMEDOWN), |
| KEY(0, 2, KEY_CAMERA_SNAPSHOT), |
| KEY(0, 3, KEY_CAMERA_FOCUS), |
| }; |
| |
| static struct matrix_keymap_data keymap_data = { |
| .keymap_size = ARRAY_SIZE(keymap), |
| .keymap = keymap, |
| }; |
| |
| static struct pm8xxx_keypad_platform_data keypad_data = { |
| .input_name = "keypad_8960", |
| .input_phys_device = "keypad_8960/input0", |
| .num_rows = 1, |
| .num_cols = 5, |
| .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9), |
| .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1), |
| .debounce_ms = 15, |
| .scan_delay_ms = 32, |
| .row_hold_ns = 91500, |
| .wakeup = 1, |
| .keymap_data = &keymap_data, |
| }; |
| |
| static const unsigned int keymap_sim[] = { |
| KEY(0, 0, KEY_7), |
| KEY(0, 1, KEY_DOWN), |
| KEY(0, 2, KEY_UP), |
| KEY(0, 3, KEY_RIGHT), |
| KEY(0, 4, KEY_ENTER), |
| KEY(0, 5, KEY_L), |
| KEY(0, 6, KEY_BACK), |
| KEY(0, 7, KEY_M), |
| |
| KEY(1, 0, KEY_LEFT), |
| KEY(1, 1, KEY_SEND), |
| KEY(1, 2, KEY_1), |
| KEY(1, 3, KEY_4), |
| KEY(1, 4, KEY_CLEAR), |
| KEY(1, 5, KEY_MSDOS), |
| KEY(1, 6, KEY_SPACE), |
| KEY(1, 7, KEY_COMMA), |
| |
| KEY(2, 0, KEY_6), |
| KEY(2, 1, KEY_5), |
| KEY(2, 2, KEY_8), |
| KEY(2, 3, KEY_3), |
| KEY(2, 4, KEY_NUMERIC_STAR), |
| KEY(2, 5, KEY_UP), |
| KEY(2, 6, KEY_DOWN), |
| KEY(2, 7, KEY_LEFTSHIFT), |
| |
| KEY(3, 0, KEY_9), |
| KEY(3, 1, KEY_NUMERIC_POUND), |
| KEY(3, 2, KEY_0), |
| KEY(3, 3, KEY_2), |
| KEY(3, 4, KEY_SLEEP), |
| KEY(3, 5, KEY_F1), |
| KEY(3, 6, KEY_F2), |
| KEY(3, 7, KEY_F3), |
| |
| KEY(4, 0, KEY_BACK), |
| KEY(4, 1, KEY_HOME), |
| KEY(4, 2, KEY_MENU), |
| KEY(4, 3, KEY_VOLUMEUP), |
| KEY(4, 4, KEY_VOLUMEDOWN), |
| KEY(4, 5, KEY_F4), |
| KEY(4, 6, KEY_F5), |
| KEY(4, 7, KEY_F6), |
| |
| KEY(5, 0, KEY_R), |
| KEY(5, 1, KEY_T), |
| KEY(5, 2, KEY_Y), |
| KEY(5, 3, KEY_LEFTALT), |
| KEY(5, 4, KEY_KPENTER), |
| KEY(5, 5, KEY_Q), |
| KEY(5, 6, KEY_W), |
| KEY(5, 7, KEY_E), |
| |
| KEY(6, 0, KEY_F), |
| KEY(6, 1, KEY_G), |
| KEY(6, 2, KEY_H), |
| KEY(6, 3, KEY_CAPSLOCK), |
| KEY(6, 4, KEY_PAGEUP), |
| KEY(6, 5, KEY_A), |
| KEY(6, 6, KEY_S), |
| KEY(6, 7, KEY_D), |
| |
| KEY(7, 0, KEY_V), |
| KEY(7, 1, KEY_B), |
| KEY(7, 2, KEY_N), |
| KEY(7, 3, KEY_MENU), |
| KEY(7, 4, KEY_PAGEDOWN), |
| KEY(7, 5, KEY_Z), |
| KEY(7, 6, KEY_X), |
| KEY(7, 7, KEY_C), |
| |
| KEY(8, 0, KEY_P), |
| KEY(8, 1, KEY_J), |
| KEY(8, 2, KEY_K), |
| KEY(8, 3, KEY_INSERT), |
| KEY(8, 4, KEY_LINEFEED), |
| KEY(8, 5, KEY_U), |
| KEY(8, 6, KEY_I), |
| KEY(8, 7, KEY_O), |
| |
| KEY(9, 0, KEY_4), |
| KEY(9, 1, KEY_5), |
| KEY(9, 2, KEY_6), |
| KEY(9, 3, KEY_7), |
| KEY(9, 4, KEY_8), |
| KEY(9, 5, KEY_1), |
| KEY(9, 6, KEY_2), |
| KEY(9, 7, KEY_3), |
| |
| KEY(10, 0, KEY_F7), |
| KEY(10, 1, KEY_F8), |
| KEY(10, 2, KEY_F9), |
| KEY(10, 3, KEY_F10), |
| KEY(10, 4, KEY_FN), |
| KEY(10, 5, KEY_9), |
| KEY(10, 6, KEY_0), |
| KEY(10, 7, KEY_DOT), |
| |
| KEY(11, 0, KEY_LEFTCTRL), |
| KEY(11, 1, KEY_F11), |
| KEY(11, 2, KEY_ENTER), |
| KEY(11, 3, KEY_SEARCH), |
| KEY(11, 4, KEY_DELETE), |
| KEY(11, 5, KEY_RIGHT), |
| KEY(11, 6, KEY_LEFT), |
| KEY(11, 7, KEY_RIGHTSHIFT), |
| KEY(0, 0, KEY_VOLUMEUP), |
| KEY(0, 1, KEY_VOLUMEDOWN), |
| KEY(0, 2, KEY_CAMERA_SNAPSHOT), |
| KEY(0, 3, KEY_CAMERA_FOCUS), |
| }; |
| |
| static struct matrix_keymap_data keymap_data_sim = { |
| .keymap_size = ARRAY_SIZE(keymap_sim), |
| .keymap = keymap_sim, |
| }; |
| |
| static struct pm8xxx_keypad_platform_data keypad_data_sim = { |
| .input_name = "keypad_8960", |
| .input_phys_device = "keypad_8960/input0", |
| .num_rows = 12, |
| .num_cols = 8, |
| .rows_gpio_start = PM8921_GPIO_PM_TO_SYS(9), |
| .cols_gpio_start = PM8921_GPIO_PM_TO_SYS(1), |
| .debounce_ms = 15, |
| .scan_delay_ms = 32, |
| .row_hold_ns = 91500, |
| .wakeup = 1, |
| .keymap_data = &keymap_data_sim, |
| }; |
| |
| static int pm8921_therm_mitigation[] = { |
| 1100, |
| 700, |
| 600, |
| 325, |
| }; |
| |
| #define MAX_VOLTAGE_MV 4200 |
| static struct pm8921_charger_platform_data pm8921_chg_pdata __devinitdata = { |
| .safety_time = 180, |
| .update_time = 60000, |
| .max_voltage = MAX_VOLTAGE_MV, |
| .min_voltage = 3200, |
| .resume_voltage_delta = 100, |
| .term_current = 100, |
| .cool_temp = 10, |
| .warm_temp = 40, |
| .temp_check_period = 1, |
| .max_bat_chg_current = 1100, |
| .cool_bat_chg_current = 350, |
| .warm_bat_chg_current = 350, |
| .cool_bat_voltage = 4100, |
| .warm_bat_voltage = 4100, |
| .thermal_mitigation = pm8921_therm_mitigation, |
| .thermal_levels = ARRAY_SIZE(pm8921_therm_mitigation), |
| }; |
| |
| static struct pm8xxx_misc_platform_data pm8xxx_misc_pdata = { |
| .priority = 0, |
| }; |
| |
| static struct pm8921_bms_platform_data pm8921_bms_pdata __devinitdata = { |
| .r_sense = 10, |
| .i_test = 2500, |
| .v_failure = 3000, |
| .calib_delay_ms = 600000, |
| .max_voltage_uv = MAX_VOLTAGE_MV * 1000, |
| }; |
| |
| #define PM8921_LC_LED_MAX_CURRENT 4 /* I = 4mA */ |
| #define PM8921_LC_LED_LOW_CURRENT 1 /* I = 1mA */ |
| #define PM8XXX_LED_PWM_PERIOD 1000 |
| #define PM8XXX_LED_PWM_DUTY_MS 20 |
| /** |
| * PM8XXX_PWM_CHANNEL_NONE shall be used when LED shall not be |
| * driven using PWM feature. |
| */ |
| #define PM8XXX_PWM_CHANNEL_NONE -1 |
| |
| static struct led_info pm8921_led_info_liquid[] = { |
| { |
| .name = "led:red", |
| .flags = PM8XXX_ID_LED_0, |
| .default_trigger = "battery-charging", |
| }, |
| { |
| .name = "led:green", |
| .flags = PM8XXX_ID_LED_0, |
| .default_trigger = "battery-full", |
| }, |
| { |
| .name = "led:blue", |
| .flags = PM8XXX_ID_LED_2, |
| .default_trigger = "dc-online", |
| }, |
| }; |
| |
| static struct pm8xxx_led_config pm8921_led_configs_liquid[] = { |
| [0] = { |
| .id = PM8XXX_ID_LED_0, |
| .mode = PM8XXX_LED_MODE_MANUAL, |
| .max_current = PM8921_LC_LED_MAX_CURRENT, |
| }, |
| [1] = { |
| .id = PM8XXX_ID_LED_1, |
| .mode = PM8XXX_LED_MODE_MANUAL, |
| .max_current = PM8921_LC_LED_LOW_CURRENT, |
| }, |
| [2] = { |
| .id = PM8XXX_ID_LED_2, |
| .mode = PM8XXX_LED_MODE_MANUAL, |
| .max_current = PM8921_LC_LED_MAX_CURRENT, |
| }, |
| }; |
| |
| static struct led_platform_data pm8xxx_leds_core_liquid = { |
| .num_leds = ARRAY_SIZE(pm8921_led_info_liquid), |
| .leds = pm8921_led_info_liquid, |
| }; |
| |
| static struct pm8xxx_led_platform_data pm8xxx_leds_pdata_liquid = { |
| .led_core = &pm8xxx_leds_core_liquid, |
| .configs = pm8921_led_configs_liquid, |
| .num_configs = ARRAY_SIZE(pm8921_led_configs_liquid), |
| }; |
| |
| static struct led_info pm8921_led_info[] = { |
| [0] = { |
| .name = "led:battery_charging", |
| .default_trigger = "battery-charging", |
| }, |
| [1] = { |
| .name = "led:battery_full", |
| .default_trigger = "battery-full", |
| }, |
| }; |
| |
| static struct led_platform_data pm8921_led_core_pdata = { |
| .num_leds = ARRAY_SIZE(pm8921_led_info), |
| .leds = pm8921_led_info, |
| }; |
| |
| static int pm8921_led0_pwm_duty_pcts[56] = { |
| 1, 4, 8, 12, 16, 20, 24, 28, 32, 36, |
| 40, 44, 46, 52, 56, 60, 64, 68, 72, 76, |
| 80, 84, 88, 92, 96, 100, 100, 100, 98, 95, |
| 92, 88, 84, 82, 78, 74, 70, 66, 62, 58, |
| 58, 54, 50, 48, 42, 38, 34, 30, 26, 22, |
| 14, 10, 6, 4, 1 |
| }; |
| |
| static struct pm8xxx_pwm_duty_cycles pm8921_led0_pwm_duty_cycles = { |
| .duty_pcts = (int *)&pm8921_led0_pwm_duty_pcts, |
| .num_duty_pcts = ARRAY_SIZE(pm8921_led0_pwm_duty_pcts), |
| .duty_ms = PM8XXX_LED_PWM_DUTY_MS, |
| .start_idx = 0, |
| }; |
| |
| static struct pm8xxx_led_config pm8921_led_configs[] = { |
| [0] = { |
| .id = PM8XXX_ID_LED_0, |
| .mode = PM8XXX_LED_MODE_PWM2, |
| .max_current = PM8921_LC_LED_MAX_CURRENT, |
| .pwm_channel = 5, |
| .pwm_period_us = PM8XXX_LED_PWM_PERIOD, |
| .pwm_duty_cycles = &pm8921_led0_pwm_duty_cycles, |
| }, |
| [1] = { |
| .id = PM8XXX_ID_LED_1, |
| .mode = PM8XXX_LED_MODE_PWM1, |
| .max_current = PM8921_LC_LED_MAX_CURRENT, |
| .pwm_channel = 4, |
| .pwm_period_us = PM8XXX_LED_PWM_PERIOD, |
| }, |
| }; |
| |
| static struct pm8xxx_led_platform_data pm8xxx_leds_pdata = { |
| .led_core = &pm8921_led_core_pdata, |
| .configs = pm8921_led_configs, |
| .num_configs = ARRAY_SIZE(pm8921_led_configs), |
| }; |
| |
| static struct pm8xxx_ccadc_platform_data pm8xxx_ccadc_pdata = { |
| .r_sense = 10, |
| }; |
| |
| static struct pm8921_platform_data pm8921_platform_data __devinitdata = { |
| .irq_pdata = &pm8xxx_irq_pdata, |
| .gpio_pdata = &pm8xxx_gpio_pdata, |
| .mpp_pdata = &pm8xxx_mpp_pdata, |
| .rtc_pdata = &pm8xxx_rtc_pdata, |
| .pwrkey_pdata = &pm8xxx_pwrkey_pdata, |
| .keypad_pdata = &keypad_data, |
| .misc_pdata = &pm8xxx_misc_pdata, |
| .regulator_pdatas = msm_pm8921_regulator_pdata, |
| .charger_pdata = &pm8921_chg_pdata, |
| .bms_pdata = &pm8921_bms_pdata, |
| .adc_pdata = &pm8xxx_adc_pdata, |
| .leds_pdata = &pm8xxx_leds_pdata, |
| .ccadc_pdata = &pm8xxx_ccadc_pdata, |
| }; |
| |
| static struct msm_ssbi_platform_data msm8960_ssbi_pm8921_pdata __devinitdata = { |
| .controller_type = MSM_SBI_CTRL_PMIC_ARBITER, |
| .slave = { |
| .name = "pm8921-core", |
| .platform_data = &pm8921_platform_data, |
| }, |
| }; |
| |
| void __init msm8960_init_pmic(void) |
| { |
| pmic_reset_irq = PM8921_IRQ_BASE + PM8921_RESOUT_IRQ; |
| msm8960_device_ssbi_pmic.dev.platform_data = |
| &msm8960_ssbi_pm8921_pdata; |
| pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len; |
| |
| /* Simulator supports a QWERTY keypad */ |
| if (machine_is_msm8960_sim()) |
| pm8921_platform_data.keypad_pdata = &keypad_data_sim; |
| |
| if (machine_is_msm8960_liquid()) { |
| pm8921_platform_data.keypad_pdata = &keypad_data_liquid; |
| pm8921_platform_data.leds_pdata = &pm8xxx_leds_pdata_liquid; |
| } |
| } |